WorldWideScience

Sample records for extrusion technology seminar

  1. Clean coal technologies---An international seminar: Seminar evaluation and identification of potential CCT markets

    International Nuclear Information System (INIS)

    Guziel, K.A.; Poch, L.A.; Gillette, J.L.; Buehring, W.A.

    1991-07-01

    The need for environmentally responsible electricity generation is a worldwide concern. Because coal is available throughout the world at a reasonable cost, current research is focusing on technologies that use coal with minimal environmental effects. The United States government is supporting research on clean coal technologies (CCTs) to be used for new capacity additions and for retrofits to existing capacity. To promote the worldwide adoption of US CCTs, the US Department of Energy, the US Agency for International Development, and the US Trade and Development Program sponsored a two-week seminar titled Clean Coal Technologies -- An International Seminar. Nineteen participants from seven countries were invited to this seminar, which was held at Argonne National Laboratory in June 1991. During the seminar, 11 US CCT vendors made presentations on their state-of-the-art and commercially available technologies. The presentations included technical, environmental, operational, and economic characteristics of CCTs. Information on financing and evaluating CCTs also was presented, and participants visited two CCT operating sites. The closing evaluation indicated that the seminar was a worthwhile experience for all participants and that it should be repeated. The participants said CCT could play a role in their existing and future electric capacity, but they agreed that more CCT demonstration projects were needed to confirm the reliability and performance of the technologies

  2. MODERNIZATION OF TECHNOLOGICAL LINE FOR CELLULAR EXTRUSION PROCESS

    Directory of Open Access Journals (Sweden)

    Tomasz Garbacz

    2014-06-01

    As part of the modernization of the cellular extrusion technology the extrusion head was designed and made. During the designing and modeling of the head the Auto CAD programe was used. After the prototyping the extrusion head was tested. In the article specification of cellular extrusion process of thermoplastics was presented. In the research, the endothermal chemical blowing agents in amount 1,0% by mass were used. The quantity of used blowing agent has a direct influence on density and structure of the extruded product of modified polymers. However, these properties have further influence on porosity, impact strength, hardness, tensile strength and another.

  3. Climate technology initiative capacity building seminar: best practice in climate technology and energy efficiency in central and eastern Europe. Seminar Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Pichl, P [ed.

    2000-08-01

    The Capacity Building Seminar on 'Best Practice in Climate Technology and Energy Efficiency in Central and Eastern Europe', held 6-10 December 1999 in Marienthal/Ostritz in Germany, was a very successful event in the framework of the CLIMATE TECHNOLOGY INITIATIVE (CTI). One reason for that is that the seminar allowed delegates from 22 nations, from Kazakhstan to Estonia, come together for an exchange of opinions about 'Energy Efficiency and Climate Protection' and all related issues. A reason is that this seminar provided an excellent starting point for future networking in Central and Eastern Europe and Asia. The colleagues who got to know each other at the seminar will meet again in future workshops and seminars. They can now contact a colleague from abroad to get information about special questions of Energy Efficiency when they need it. A third reason - and the most important one for the entire co-operation within the CTI organisation - is the special character of the seminar as a starting point for multitude of activities on Energy Efficiency and Climate Protection. At the end of the Ostritz seminar eleven delegations stated that they would organise follow up workshops in their own countries to go deeper into the details and to co-operate on a higher level. It may be that these workshops will be followed by others in other European regions. (orig./GL)

  4. Climate technology initiative capacity building seminar: best practice in climate technology and energy efficiency in central and eastern Europe. Seminar Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Pichl, P. [ed.

    2000-08-01

    The Capacity Building Seminar on 'Best Practice in Climate Technology and Energy Efficiency in Central and Eastern Europe', held 6-10 December 1999 in Marienthal/Ostritz in Germany, was a very successful event in the framework of the CLIMATE TECHNOLOGY INITIATIVE (CTI). One reason for that is that the seminar allowed delegates from 22 nations, from Kazakhstan to Estonia, come together for an exchange of opinions about 'Energy Efficiency and Climate Protection' and all related issues. A reason is that this seminar provided an excellent starting point for future networking in Central and Eastern Europe and Asia. The colleagues who got to know each other at the seminar will meet again in future workshops and seminars. They can now contact a colleague from abroad to get information about special questions of Energy Efficiency when they need it. A third reason - and the most important one for the entire co-operation within the CTI organisation - is the special character of the seminar as a starting point for multitude of activities on Energy Efficiency and Climate Protection. At the end of the Ostritz seminar eleven delegations stated that they would organise follow up workshops in their own countries to go deeper into the details and to co-operate on a higher level. It may be that these workshops will be followed by others in other European regions. (orig./GL)

  5. Proceedings of 2008 KAERI/JAEA joint seminar on advanced irradiation and PIE technologies

    International Nuclear Information System (INIS)

    Ryu, Woo-Seog; Ishihara, Masahiro

    2008-12-01

    Under the Arrangement for Cooperation in the field of peaceful uses of Nuclear Energy between the Korea Atomic Energy Research Institute (KAERI) and the Japan Atomic Energy Agency (JAEA), the 2008 KAERI-JAEA Joint Seminar on Advanced Irradiation and PIE (post-irradiation examination) Technologies has been held at KAERI in Daejeon, Korea, from November 5 to 7, 2008. This seminar was organized by the PIE and Radwaste Division, Research Reactor Engineering Division, and HANARO Management Division in KAERI. It was also the first time to hold the seminar under the agreement signed September 4, 2008. This triennial seminar is the sixth in series of bilateral exchange of irradiation technologies. Since the first joint seminar on Post Irradiation Examination Technology between JAERI and KAERI held at JAERI Oarai center, Japan in 1992, it has been a good model of international cooperation program between KAERI and JAEA in the field of neutron irradiation uses. At the fifth seminar in 2005, irradiation technology field was included to the joint seminar, moreover in this time it is expanded to the research reactor management field for covering whole areas of irradiation using in research reactors. The seminar was divided into three technical sessions; the sessions addressed the general topics of 'research reactor management', 'advanced irradiation technology' and 'post-irradiation examination technology'. Total 46 presentations were made, and active information exchange was done among participants. This proceeding is containing the papers or manuscripts presented in the 2008 KAERI-JAEA Joint Seminar on Advanced Irradiation and PIE Technologies. The 46 of the presented papers indexed individually. (J.P.N.)

  6. The Proceeding on National Seminar in Nuclear Science and Technology

    International Nuclear Information System (INIS)

    Duyeh Setiawan; Rochestri Sofyan; Nurlaila Z; Poppy Intan Tjahaja; Efrizon Umar; Muhayatun; Nanny K Oekar; Sudjatmi K Alfa; Dani Gustaman Syarif; Didi Gayani; Djoko Hadi P; Saeful Hidayat; Ari Darmawan Pasek; Nathanel P Tandian; Toto Hardianto

    2009-11-01

    The proceeding on national seminar in nuclear science and technology by National Atomic energy Agency held in Bandung on June 3, 2009. The topic of the seminar is the increasing the role of nuclear science and technology for the welfare. The proceeding consist of the article from BATAN participant as well as outside. (PPIN)

  7. Proceedings of 2012 JAEA/KAERI joint seminar on advanced irradiation and PIE technologies

    International Nuclear Information System (INIS)

    Ishihara, Masahiro; Ishitsuka, Etsuo; Suzuki, Masahide

    2012-12-01

    Under the 'Arrangement for Corporation in the field of peaceful uses of Nuclear Energy between the Japan Atomic Energy Agency (JAEA) and the Korean Atomic Energy Research Institute (KAERI)', the 2012 JAEA/KAERI Joint Seminar on Advanced Irradiation and PIE (post-irradiation examination) Technologies has been held at Mito, Japan from March 28 to 30, 2012. This triennial seminar is the seventh in series of bilateral exchange of irradiation and PIE technologies and research reactor management. Since the first joint seminar on the PIE Technology between JAERI (Japan Atomic Energy Research Institute, former agency of JAEA) and KAERI was held at JAERI Oarai Research Institute, Japan in 1992, the international cooperation program between JAEA and KAERI has been actively carried out in the field of neutron irradiation. At the fifth seminar in 2005 and sixth in 2008, the irradiation technology and the research reactor management fields were included, respectively, to the joint seminar, and it covers whole areas of irradiation using research reactors. In this seminar total 37 presentations were made in three technical sessions, which are 'research reactor management', 'advanced irradiation technology' and 'post-irradiation examination technology', and active information exchange was done among participants. Papers or manuscripts presented in the 2012 JAEA/KAERI Joint Seminar on Advanced Irradiation and PIE Technologies are contained in the proceedings. (author)

  8. Final report. CIRP seminar on micro and nano technology. November 2003

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Alting, Leo

    This final reports contains a description of the 1st international CIRP seminar on micro and nano technology held at DTU in November 2003.......This final reports contains a description of the 1st international CIRP seminar on micro and nano technology held at DTU in November 2003....

  9. Proceedings of Sixth National Seminar of Waste Management Technology

    International Nuclear Information System (INIS)

    Sucipta; Zainus Salimin; Lubis, Erwansyah; Herlan Martono; Aisyah; Syahrir; Erini Yuwatini; Thamzil Las; Kusnanto

    2008-06-01

    The sixth proceedings of the seminar on technology of waste management held by National Nuclear Energy Agency on June 24, 2007. The aim of seminar is to increase strengthening of radioactive waste management infrastructure to support a success in nuclear energy program in Indonesia. The proceedings consist of 32 articles from researcher of BATAN and outside BATAN. (PPIKSN)

  10. Development of poloxamer gel formulations via hot-melt extrusion technology.

    Science.gov (United States)

    Mendonsa, Nicole S; Murthy, S Narasimha; Hashemnejad, Seyed Meysam; Kundu, Santanu; Zhang, Feng; Repka, Michael A

    2018-02-15

    Poloxamer gels are conventionally prepared by the "hot" or the "cold" process. But these techniques have some disadvantages such as high energy consumption, requires expensive equipment and often have scale up issues. Therefore, the objective of this work was to develop poloxamer gels by hot-melt extrusion technology. The model drug selected was ketoprofen. The formulations developed were 30% and 40% poloxamer gels. Of these formulations, the 30% poloxamer gels were selected as ideal gels. DSC and XRD studies showed an amorphous nature of the drug after extrusion. It was observed from the permeation studies that with increasing poloxamer concentration, a decrease in drug permeation was obtained. Other studies conducted for the formulations included in-vitro release studies, texture analysis, rheological studies and pH measurements. In conclusion, the hot-melt extrusion technology could be successfully employed to develop poloxamer gels by overcoming the drawbacks associated with the conventional techniques. Published by Elsevier B.V.

  11. Proceedings of the Sixth Seminar on Computation in Nuclear Science and Technology

    International Nuclear Information System (INIS)

    1997-01-01

    National Atomic Energy Agency (BATAN) had held the Sixth Seminar on Computation in Nuclear Science and Technology on January 16-17, 1996. The seminar is an event for information exchange among interest society in computation, modeling, and simulation. Similar as previous seminar in the past year, there were also non-BATAN and university-bound presenters and participants whose interest are in the field of science and technology. Examining the papers presented in this seminar, it shows that beside digging the so called classical computation methods, some papers brought relatively new topics like the determination and influence of chaos, neural network method, and expert system. Judging from the variety of the topics, one can conclude that interests in computation and its application are growing stronger in Indonesia

  12. Proceeding of the 7. Seminar on Technology and Safety of Nuclear Power Plants and Nuclear Facilities

    International Nuclear Information System (INIS)

    Hastowo, Hudi; Antariksawan, Anhar R.; Soetrisnanto, Arnold Y; Jujuratisbela, Uju; Aziz, Ferhat; Su'ud, Zaki; Suprawhardana, M. Salman

    2002-02-01

    The seventh proceedings of seminar safety and technology of nuclear power plant and nuclear facilities, held by National Nuclear Energy Agency. The Aims of seminar is to exchange and disseminate information about safety and nuclear Power Plant Technology and Nuclear Facilities consist of technology; high temperature reactor and application for national development sustain able and high technology. This seminar level all aspects technology, Power Reactor research reactor, high temperature reactor and nuclear facilities. The article is separated by index

  13. European public deliberation on brain machine interface technology: five convergence seminars.

    Science.gov (United States)

    Jebari, Karim; Hansson, Sven-Ove

    2013-09-01

    We present a novel procedure to engage the public in ethical deliberations on the potential impacts of brain machine interface technology. We call this procedure a convergence seminar, a form of scenario-based group discussion that is founded on the idea of hypothetical retrospection. The theoretical background of this procedure and the results of five seminars are presented.

  14. Proceedings of the Seminar on the Development of Nuclear Instrumentation Technology and Engineering

    International Nuclear Information System (INIS)

    Utaja; Setyanto; Suryanto; Martono, Herlan; Kristejo; Pribadi, Rukmono

    2003-01-01

    Proceedings of the Seminar on the Development of Nuclear Instrumentation Technology Engineering,all aspects of result research activity report that have been presented in Seminar of Development and Engineering on Medicine Industry and Environment was held on May 20, 2003. The Seminar encompass Instrumentation : Reactor Control, Industry, Medicine and based on Nuclear Instrumentation and Application, software relevant to Nuclear Engineering . The purpose of this seminar be able to information exchange among research walkers in National Nuclear Energy Agency. There are 20 papers which have separated Index

  15. Proceedings of the 9. National Seminar on Technology and Safety of Nuclear Power Plants and Nuclear Facilities

    International Nuclear Information System (INIS)

    Antariksawan, Anhar R.; Soetrisnanto, Arnold Y; Aziz, Ferhat; Untoro, Pudji; Su'ud, Zaki; Zarkasi, Amin Santoso; Lasman, As Natio

    2003-08-01

    The ninth proceedings of seminar safety and technology of nuclear power plant and nuclear facilities held by National Nuclear Energy Agency and PLN-JTK. The aims of seminar is to exchange and disseminate information about Safety and Nuclear Power Plant Technology and Nuclear Facilities consist of Technology High Temperature Reactor and Application for National Development Sustainable and High Technology. This seminar cover all aspects Technology, Power Reactor, Research Reactor High Temperature Reactor and Nuclear Facilities. There are 20 articles have separated index

  16. Fast reactor cycle technology development. 'FaCT seminar - R and D for key technology of national importance'. Seminar report and collection of documents

    International Nuclear Information System (INIS)

    2008-03-01

    An R and D program on the fast breeder reactor cycle commercialization, the FaCT Project, which was selected as one of the Key Technologies of National Importance, has been conducted at the Japan Atomic Energy Agency for the purposes of resolving the issues of long-term sustainable energy supply and the global warming. The first Seminar of the FaCT Project was held at the Osaka Science and Technology Center on November 30, 2007, to present the progress and status of the Project and exchange opinions among the participants from various sectors. In the Seminar, MEXT, METI and JAEA reported the national nuclear policy, the current status and future plan of the FaCT Project. A special panel session was also held on the approach to international collaboration relevant to the project, and the importance was stressed on further promoting the international collaboration and keeping the framework of international partnership in this area, while distinguishing the relationship between 'cooperation' and 'competition'. Over 260 audiences from various sectors including government, universities, research organizations, utilities, nuclear industries participated. This report provides a seminar summary and the presented papers. (author)

  17. Proceedings of chemical engineering in nuclear technology - national seminar on recent advances in fuel cycle technologies: book of abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    Kalpakkam Regional Centre of Indian Institute of Chemical Engineers is embarking on conducting a series of national seminars on Chemical Engineering in Nuclear Technology 2014. For CHEMENT-2014 the theme was Seminar on recent advances in fuel cycle technologies. The topics covered included research and development, modeling and simulation and equipment development. Papers relevant to INIS are indexed separately

  18. Proceedings of the seminar on optimization technology of the use of G.A. Siwabessy Research Reactor

    International Nuclear Information System (INIS)

    1999-01-01

    Seminar on optimization technology of the use of G.A. Siwabessy research reactor was held on March 16, 1999 at the Multipurpose Reactor Center, Serpong, Indonesia. During the seminar, have presented 14 papers about activities or researches on reactor operation technology, use of G.A. Siwabessy research reactor, engineering and nuclear installation development, maintenance and quality assurances. The seminar was held as a tool for developing non-researcher functional workers

  19. Proceedings of the seminar on optimization technology of the use of G.A. Siwabessy Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Seminar on optimization technology of the use of G.A. Siwabessy research reactor was held on March 16, 1999 at the Multipurpose Reactor Center, Serpong, Indonesia. During the seminar, have presented 14 papers about activities or researches on reactor operation technology, use of G.A. Siwabessy research reactor, engineering and nuclear installation development, maintenance and quality assurances. The seminar was held as a tool for developing non-researcher functional workers.

  20. Proceedings of the 8. National Seminar on Technology and Safety of Nuclear Power Plants and Nuclear Facilities

    International Nuclear Information System (INIS)

    Antariksawan, Anhar R.; Soetrisnanto, Arnold Y.; Aziz, Ferhat; Untoro, Pudji; Su'ud, Zaki; Zarkasi, Amin Santosa; Umar, Faraz H.; Teguh Bambang; Hafnan, M.; Mustafa, Bustani; Rosfian, H.

    2002-10-01

    The eight proceeding of National Seminar on Technology and Safety of Nuclear Power Plant and Nuclear Facilities held by National Atomic Energy Agency and University of Trisakti. The aims of Seminar is to exchange and disseminate information about safety and nuclear Power Plant Temperature Reactor and Application for National Development sustain able and High Technology. This Seminar covers all aspect Technology, Power Reactor : Research Reactor; High Temperature Reactor and Nuclear Facilities. There are 33 articles have separated index

  1. Pellet manufacturing by extrusion-spheronization using process analytical technology

    DEFF Research Database (Denmark)

    Sandler, Niklas; Rantanen, Jukka; Heinämäki, Jyrki

    2005-01-01

    The aim of this study was to investigate the phase transitions occurring in nitrofurantoin and theophylline formulations during pelletization by extrusion-spheronization. An at-line process analytical technology (PAT) approach was used to increase the understanding of the solid-state behavior...... of the active pharmaceutical ingredients (APIs) during pelletization. Raman spectroscopy, near-infrared (NIR) spectroscopy, and X-ray powder diffraction (XRPD) were used in the characterization of polymorphic changes during the process. Samples were collected at the end of each processing stage (blending......, granulation, extrusion, spheronization, and drying). Batches were dried at 3 temperature levels (60 degrees C, 100 degrees C, and 135 degrees C). Water induced a hydrate formation in both model formulations during processing. NIR spectroscopy gave valuable real-time data about the state of water in the system...

  2. Proceedings of the 1st CIRP Seminar on Micro and Nano Technology

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Alting, Leo

    2003-01-01

    The present Proceedings of the 1st International CIRP Seminar on Micro and Nano Technology is the result of a CIRP initiative taken by the Working Group on Micro/Nano Technology established in 2002. The CIRP initiative is a recognition of the large potentials that micro/nano technology has...... in improving/enhancing many of the existing products and in forming the basis of a long range of new next generation of products. Micro and nano technology are common phrases used to describe phenomena, components, products etc. related to small dimensions, usually based on functioning principles...... accessible to a large group of customers. Therefore, product development and manufacture is very essential. Therefore this 1st CIRP Seminar represents an important milestone for design and industrial manufacture of products based on micro and nano technology. The Proceedings cover mostly new, interesting...

  3. Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nati...

  4. Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nat...

  5. Proceedings of the Fifth Seminar on Technology of Nuclear Materials Safety

    International Nuclear Information System (INIS)

    Indro Yuwono; Nababan, Binsar; Suharyanta

    2004-11-01

    Proceedings of the Fifth Seminar on Technology of Nuclear Material Safety all aspect of research activity concerning the role of physical protection, nuclear safeguards technology and international convection in supporting the establishment of Nuclear Power Plant in Indonesia. There are 16 articles which have separated index. (PPIN)

  6. Proceedings of the Twelfth Seminar on Computation in Nuclear Science and Technology

    International Nuclear Information System (INIS)

    Arbie, Bakri; Ardisasmita, Syamsa; Bunyamin, M.; Karsono, M.; Sangadji; Aziz, Ferhat; Marsodi; Su'ud, Zaki; Suhartanto, Heru

    2001-07-01

    The proceedings on Seminar Computation in Nuclear Science and Technologyis routine activity that held on Center for Development of Informatics and Computation Technology. The aims of proceeding is to be able to Exchange Information for interest in computation, Modelling and Simulation. The Seminar is attended by BATAN's on University Research in nuclear science activity. This proceedings used for another research. There are 26 papers which have separated index

  7. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 15: commercialization and technology transfer

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 9 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of commercialization and technology transfer. (Topic 15). One item was in INIS s ubject scope and a separate abstract was prepared for it

  8. Extrusion and Extruded Products: Changes in Quality Attributes as Affected by Extrusion Process Parameters: A Review.

    Science.gov (United States)

    Alam, M S; Kaur, Jasmeen; Khaira, Harjot; Gupta, Kalika

    2016-01-01

    Extrusion of foods is an emerging technology for the food industries to process and market a large number of products of varying size, shape, texture, and taste. Extrusion cooking technology has led to production of wide variety of products like pasta, breakfast cereals, bread crumbs, biscuits, crackers, croutons, baby foods, snack foods, confectionery items, chewing gum, texturized vegetable protein (TVP), modified starch, pet foods, dried soups, dry beverage mixes etc. The functional properties of extruded foods plays an important role for their acceptability which include water absorption, water solubility, oil absorption indexes, expansion index, bulk density and viscosity of the dough. The aim of this review is to give the detailed outlines about the potential of extrusion technology in development of different types of products and the role of extrusion-operating conditions and their effect on product development resulting in quality changes i.e physical, chemical, and nutritional, experienced during the extrusion process.

  9. Proceedings of the Seminar 'Irradiation Technologies and the IRASM Facility'

    International Nuclear Information System (INIS)

    Ponta, Corneliu Catalin; Moise, Ioan Valentin

    1999-01-01

    The seminar devoted to 'Irradiation Technologies and the IRASM Facility' aimed at debating the principal problems related to one of the most important project ever developed in Romania, at the Horia Hulubei National Institute of Physics and Nuclear Engineering, in collaboration with IAEA. IRASM (an acronym for Multiple Purpose Irradiation Facility) is using initially a 60 Co of 100 kCi irradiation source (to be replaced after an promotional stage by a 2 MCi Co source). It is designed to irradiate a materials volume of about 35,000 m 3 /year. Health, agriculture, food industry and materials industry are the most targeted customers. It will be used for sterilization of medical materials and pharmaceuticals products, peat and seed (and other agricultural products) decontamination and sterilization, experimental irradiation of food products, irradiation of composite plastics and other industrial products, etc. The seminar was a first meeting of Romanian specialists in radiation processing with potential users of these technologies as well as with decision making persons working with national governmental and regulation authorities. Twelve communications were presented as a basis for discussion. These were: 1. IRASM - a technical assistance IAEA project and the prospects for technological irradiation in Romania (Serban Dobrescu); 2. IRASM facility - goal, present stage, perspectives (Corneliu C. Ponta); 3. Nuclear safeguards and radioprotection at IRASM (Ioan Valentin Moise); 4. Nuclear safeguard policy for IRASM (Mariana Irimia, Gabriela Vladescu, Ion Cristian); 5. Technological dosimetry at IRASM (Rodica Macrin, Rodica Moraru, Nicolae Valcov); 6. Quality assurance in building and exploiting IRASM (Ioana Domsa); 7. Current status of irradiation technologies in IFIN-HH (Mitica Dragusin); 8. Chemical-pharmaceutical, cosmetic and medical product sterilization (Paul Adrian, Eleonora Gheorghiu); 9. The concept of sterilization and the sterilization testing (Ileana Petcu

  10. Proceedings of 2005 JAEA-KAERI joint seminar on advanced irradiation and PIE technologies

    International Nuclear Information System (INIS)

    2006-05-01

    In this seminar, total participants of over 100 were jointed from JAEA, KAERI, Hanyang University, Chungnam National University, Kyung Hee University, Oarai Branch of Institute for Materials Research (IMR) of Tohoku University, Nippon Nuclear Fuel Development Co., Ltd., Nuclear Development Corporation and others. The technical development and experimental data on the irradiation test and PIE were aggressively discussed in this seminar. Contributed presentations were 35 in three sessions; Current status and future program on irradiation test and PIE (10 presentations), Development of irradiation and PIE technologies (15 presentations) and Evaluation of irradiation and PIE data (10 presentations). Development of instrumented capsule technologies for HANARO irradiation, current PIE activities in each hot laboratory of both countries, development of irradiation capsules in JMTR for the Irradiation Assisted Stress Corrosion Cracking (IASCC) study, development of irradiation and PIE techniques for the safety research on the high burnup fuel, utilization plan of JOYO and development of MOX fuel containing americium have been widely noticed as topic items on irradiation and PIE technologies. This proceedings is containing papers presented in the 2005 JAEA-KAERI Joint Seminar. It also indicates the current status of the aggressive information exchange activity on two fields of irradiation test and PIE technologies between JAEA and KAERI under the Arrangement for the Implementation of Cooperative Research Program mentioned above. The 35 of the presented papers are indexed individually. (J.P.N.)

  11. Proceedings of 6th Science and Technology Congress and Seminar : vision 2020 through science and technology

    International Nuclear Information System (INIS)

    1992-01-01

    This book compiled the abstracts of papers presented in this congress and seminar. Topics discussed cover all aspects of science and technology included commerciallization, human resources development, research and development, incentives and initiative, etc. There are classified under industry, agriculture, medicine, strategy and social

  12. Proceedings of the Seminar on Research Result of Research Reactor Technology Centre 2003

    International Nuclear Information System (INIS)

    Endiah Puji Hastuti; Setiyanto; Taswanda Taryo; Mohammad Dhandhang Purwadi; Pinem, Surian; Tarigan, Alim; Hasibuan, Djaruddin; Kadarusmanto; Amir Hamzah

    2004-05-01

    The Proceeding of the Seminar on Research Result of Research Reactor Technology Centre 2003 held by P2TRR has been reported researcher are expected to use the reports as references to research activities in Science and Technology, especially in field of Nuclear Reactor. There are 27 papers which have separated index. (PPIN)

  13. Proceedings of the Sixth Seminar on Computation in Nuclear Science and Technology; Lokakarya Komputasi dalam Sains dan Teknologi Nuklir VI

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    National Atomic Energy Agency (BATAN) had held the Sixth Seminar on Computation in Nuclear Science and Technology on January 16-17, 1996. The seminar is an event for information exchange among interest society in computation, modeling, and simulation. Similar as previous seminar in the past year, there were also non-BATAN and university-bound presenters and participants whose interest are in the field of science and technology. Examining the papers presented in this seminar, it shows that beside digging the so called classical computation methods, some papers brought relatively new topics like the determination and influence of chaos, neural network method, and expert system. Judging from the variety of the topics, one can conclude that interests in computation and its application are growing stronger in Indonesia.

  14. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 4: dynamics

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 7 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of dynamics. (Topic 4). One item was in INIS subject scope and a separate abstract was prepared for it

  15. Extrusion processing : effects on dry canine diets

    NARCIS (Netherlands)

    Tran, Q.D.

    2008-01-01

    Keywords: Extrusion, Canine diet, Protein, Lysine, Starch gelatinization, Palatability, Drying.

    Extrusion cooking is a useful and economical tool for processing animal feed. This high temperature, short time processing technology causes chemical and physical changes that alter the

  16. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 8: computation

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 10 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of computation. (Topic 8). Three items were in INIS subject scope and a separate abstract was prepared for each of them

  17. Optical Measurement Technology For Aluminium Extrusions

    International Nuclear Information System (INIS)

    Moe, Per Thomas; Willa-Hansen, Arnfinn; Stoeren, Sigurd

    2007-01-01

    Optical measurement techniques such as laser scanning, structured light scanning and photogrammetry can be used for accurate shape control for aluminum extrusion and downstream processes. The paper presents the fundamentals of optical shape measurement. Furthermore, it focuses on how full-field in- and off-line shape measurement during pure-bending of aluminum extrusions has been performed with stripe projection (structured light) using white light. Full field shape measurement is difficult to implement industrially, but is very useful as a laboratory tool. For example, it has been clearly shown how moderate internal air pressure (less than 5 bars) can significantly reduce undesirable cross-sectional shape distortions during pure bending, and how buckling of the compressive flange occurs at an early stage. Finally, a stretch-bending set-up with adaptive shape control using internal gas pressure and optical techniques is presented

  18. Proceedings of the First Seminar on Radiation Safety Technology and Nuclear Biomedicine

    International Nuclear Information System (INIS)

    Suprihadi, Topo

    2003-01-01

    The First Seminar on Radiation Safety Technology and Nuclear Biomedicine was held on 10-11 April 2001 at the Center for Research and Development of Radiation Safety and Nuclear Biomedicine have presented 19 papers about upgrading manpower resources, researcher, investigator, manager, and user of nuclear facilities, to go out against free market era

  19. Proceedings of the Seminar MINT R and D 2002: Strengthening R and D Culture for Technology Generation

    International Nuclear Information System (INIS)

    2002-01-01

    The papers presented in this seminar discussed the following areas: techniques, processes, characterization, case studies, infrastructures and products development, technology development, research and development management in MINT - Malaysian Institute for Nuclear Technology Research

  20. 8. Seminar of the IMP-IIE-ININ on technological specialties. Topic 10: Earth Sciences

    International Nuclear Information System (INIS)

    1996-01-01

    The document contains two papers within INIS subject scope which were presented at the 8th Seminar of the IMP-IIE-ININ on technological specialties. Topic 10: Earth Sciences. A separate abstract was prepared for each paper

  1. 2003 Castor seminar - 120 tons of high technology for safety

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    Castor (Cask for Storage and Transport of Radioactive Material) has become a symbol of the pros and cons of nuclear power in the public debate. Actually, what is Castor, and what is the technology behind this name? Siempelkamp Nukleartechnik and the Gesellschaft fuer Nuklearbehaelter mbH (GNB) invited interested parties to a presentation of the concept, technology, and manufacture on the occasion of the 2003 Castor Seminar. There was the possibility, among other events, to attend the casting process of a Castor cask at the Krefeld foundry of Siempelkamp. GNB offered a visit to its Muelheim works where the final assembly of the Castor cask could be observed. (orig.)

  2. 7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts

    International Nuclear Information System (INIS)

    2012-01-01

    This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques

  3. 4. Seminar on efficient metal forming and machining: papers

    International Nuclear Information System (INIS)

    1982-01-01

    The 4th seminar on efficient metal forming and machining was held at the CSIR conference centre in Pretoria on 16 November 1982. This conference basically discussed the forming, fabrication and machining of metals which included the different methods used as well as new developments on tools manufacturing and their applications. The topics that were discussed cover subjects such as the creep feed grinding, thermal properties of coating materials and their effect on the efficiency of coated cutting tools, economic rough and finish milling, the design and application of high speed steel cutting tools, aluminium extrusion, the manufacturing and finishing of extrusion dies, broaching techniques, cold forming in the fastener industry, finishing methods for spiral, bevel and hypoid gears, laser cutting, press tool design, and productivity in the forging industry. Another topic that were discussed, is the current status of diamond and cubic boron nitride composites, their synthesis and roll in the production of a new range of ultra hard ceramic-type materials

  4. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 7: energy savings

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 6 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of energy savings. (Topic 7). One item was in INIS subject scope and a separate abstract was prepared for it

  5. Experimental Seminar on Nuclear Energy for Teachers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    `Experimental Seminar on Nuclear Energy for Teachers` was conducted and sponsored by the Science and Technology Agency. And in order to understand nuclear energy properly through lectures and experiments with good results inclass, the seminar carried out for teachers of high schools and junior high schools by the Nuclear Technology and Education Center (NuTEC), Japan Atomic Energy Research Institute in 1990 FY to 1997 FY. In this report, details of the seminars in the above period are described and No.1 to 17 of Communication Letters of Experimental Seminar on Nuclear Energy` started at 1992 FY are described also. These letters were prepared for attendant follow-up program. And programs of recent seminars, future`s seminars, impressions and comments from attendants, reports from actual classes and others are described in these letters and they are very useful for educational classes on nuclear energy by other teachers. Therefore contents of the letters are listed and easy to refer. A part of this educational task was transferred to the Radiation Application Development Association in 1997 FY and other parts were transferred in 1998 FY. (author)

  6. 7. Seminar of the IIE-ININ-IMP on technological specialties. Topic 10: Information Services

    International Nuclear Information System (INIS)

    1994-01-01

    The document includes 10 papers presented at the 7. Seminar of the IIE-IMP-ININ (Mexico) on technological specialities in the field of information services (Topic 10). Three items were in INIS subject scope and a separate abstract was prepared for each of them

  7. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 13: earth sciences

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 12 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of earth sciences. (Topic 13). Four items were in INIS subject scope and a separate abstract was prepared for each of them

  8. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 3: thermal fluids

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 10 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of thermal fluids. (Topic 3). From these, 4 papers were in INIS subject scope and a separate abstract was prepared for each of them

  9. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 6: environmental contamination

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 10 papers presented at the 6. Seminar of the IIE-ININ-IMP on technological specialities in the field of environmental contamination (Topic 6). From these, 6 papers were in INIS subject scope and a separate abstract was prepared for each of these papers

  10. Peat Research Seminar

    International Nuclear Information System (INIS)

    1993-01-01

    The VTT Seminar on Peat Research was held in Espoo, Finland, on April 14-15, 1993. The programme consisted of technical session on Peat in Energy Production, Peat Research Programs, Peat Production and Harvesting Technology

  11. 8. Seminar of the IMP-IIE-ININ on technological specialties. Topic 9: Analytical Chemistry

    International Nuclear Information System (INIS)

    1996-01-01

    The document includes four papers considered within the INIS subject scope, which were presented at the 8th Seminar of the IMP-IIE-ININ on technological specialities (Section Analytical Chemistry), held on 26 June 1996 in Cuernavaca (Mexico). A separate abstract and indexing were provided for each paper

  12. Basic radiation knowledge for school education course. Nuclear technology seminar 2014 (Contract program)

    International Nuclear Information System (INIS)

    Watanabe, Yoko; Arai, Nobuyoshi; Sawada, Makoto; Kanaizuka, Seiichi; Shimada, Mayuka; Ishikawa, Tomomi; Nakamura, Kazuyuki

    2015-11-01

    Japan Atomic Energy Agency has conducted Nuclear Technology Seminar for Asian countries which plan to introduce nuclear power plant in future, in order to increase the number of engineers and specialists in nuclear related field. The Nuclear Technology Seminar on the Basic Radiation Knowledge for School Education Course was launched in 2012 due to increased recognition of the dissemination of the basic knowledge of radiation in public and education sectors as an important issue in the aftermath of the Fukushima Daiichi Nuclear Power Station Accident in 2011. It was the third time to conduct this course and fifteen trainees from eight Asian countries participated in 2014. In response to the requests of past participants, a new exercise 'Joint experiment with high school students' was introduced from 2014 to provide an international learning experience for the course participants and the local Japanese students by jointly conducting radiation related exercises. A new learning material was also developed in 2014 to help participants to study the basics of radiation in English. All the course activities including the details of preparatory process and course evaluation were described in this report. (author)

  13. Papers of Scientific Seminar Polish Science and Technology for Nuclear Energy of Tomorrow

    International Nuclear Information System (INIS)

    2000-01-01

    The report presents papers and discussion during the seminar organised by Polish Nuclear Society, Institute of Nuclear Chemistry and Technology, Institute of Atomic Energy and National Atomic Agency held 13-14 April 2000 in Madralin near warsaw. The seminar was attended by about 70 participants from many centers and universities. The main topics were connected with decision of Economic Committee of the Government accepting a document entitled 'Principles of energy policy in poland up to year 2020', which predicts low increase of electric energy demand thus excludes construction of nuclear power plants in near future.Authors of papers and participants of discussion pointed out many factors in development of energy supply in the world and in Poland, Which should focus the interest of public opinion on sustained development of energy sources keeping open a nuclear option. The panel discussion was concentrated on the following topics: development of energy sector in Poland, nuclear energy of to-morrow, public information and education and research activities. The main conclusions of seminar may be formulated as follows: 1) pay more attention to realistic and correct assumption of energy demands in future, 2) follow up the tendencies in nuclear reactor technology development associated with nuclear and radiological safety along with storing the radioactive waste and burn-up fuel, 3) nuclear energy cannot be developed without public acceptance, ots positive aspects and mainly proecological character should be highlighted, 4) long term program of public education should be performed especially by proper field of studies at universities and responsible presentation in mass media, 5) intensification of research in widely formulated nuclear energy applications including work on supporting of nuclear energy development in Poland (author)

  14. PREFACE: International Seminar on Science and Technology of Glass Materials (ISSTGM-2009)

    Science.gov (United States)

    Veeraiah, N.

    2009-07-01

    The progress of the human race is linked with the development of new materials and also the values they acquired in the course of time. Though the art of glass forming has been known from Egyptian civilization, the understanding and use of these glasses for technological applications only became possible once the structural aspects were revealed by the inspiring theories proposed by William H Zachariasen. Glass and glass ceramics have become the essential materials for modern technology. The applications of these materials are wide and cover areas such as optical communication, laser host, innovative architecture, bio-medical, automobile and space technology. As we master the technology, we must also learn to use it judiciously and for the overall development of all in this global village. The International Seminar on Science and Technology of Glass Materials (ISSTGM-2009) is organized to bring together scientists, academia and industry in order to discuss various aspects of the technology and to inspire young scholars to take up fruitful research. Various topics such as glass formation and glass-ceramics, glass structure, applications of glass and glass ceramics in nuclear waste management, radiation dosimetry, electronics and information technology, biotechnological applications, bulk metallic glasses, glasses containing nano-particles, hybrid glasses, novel glasses and applications in photonics, Non-linear optics and energy generation were discussed. In this volume, 59 research articles covering 18 invited talks, 10 oral presentations and 31 poster presentations are included. We hope these will serve as a valuable resource to all the scientists and scholars working with glass materials. Acharya Nagarjuna University, established in 1976, is named after the great Buddhist preceptor and philosopher, Acharya Nagarjuna, who founded a university on the banks of river Krishna some centuries ago. The University is situated between Vijayawada and Guntur, the famous

  15. Proceedings of the Third Seminar on Waste Management Technology

    International Nuclear Information System (INIS)

    Gunandjar; Lubis, Erwansyah; Herlan-Martono; Halimah

    2000-02-01

    The Proceeding includes the result of research activities on managing hazard and toxic materials, radioactive waste, and environmental problems. The seminar has presented 34 papers, from BATAN participants as well as outside. The aim of the seminar is to share the results of research activities on waste management. Industrial waste management based on ecosystem and socio system balances will support national development, and result in a better public acceptance. (PPIN)

  16. Fiscal 1999 technical survey report. Cooperative project on energy conservation seminar; 1999 nendo sho energy seminar kyoryoku jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    NEDO (New Energy and Industrial Technology Development Organization), from the viewpoint that the development and popularization of energy conservation technologies are extremely important as energy conservation measures, collected energy related primary information from 12 Asian countries including Japan for the development and popularization of energy conservation technologies, and has constructed a database NEDO/DB. NEDO is now propelling forward its efforts to popularize the database. For popularizing NEDO/DB in Vietnam and for rendering the people conscious of energy conservation, NEDO dispatched some lecturers to an energy conservation seminar sponsored by the Vietnamese Government. The importance of energy conservation promoting measures was highlighted at the seminar. NEDO's approach to AIJ (activities implemented jointly) and CDM (clean development mechanism) was described at the seminar, and a lecture meeting was held to explain NEDO/DB and to teach how to use the database. (NEDO)

  17. Analysis of technology and seminar on economic trends about High-intensity LED

    International Nuclear Information System (INIS)

    2003-09-01

    This is divided into two parts. Contents of this report in the first part are technical trends on high-intensity LED which reports introduction of LED as compound semiconductor, white LED? patent issues, review on technology of High-intensity LED and Reliability of High-intensity LED. The second part deals with economic tends about High-intensity LED. This seminar was held to report analysis and economical trends about High-intensity LED by Korea Industrial Education Institute in 2003.

  18. Soldering Technology (6th) Proceedings of Annual Seminar, 17-18 February 1982.

    Science.gov (United States)

    1982-02-01

    aspect oF health and safety during this presentation. We are hoping that the work conducted by Van 2 Der Molen in the USA will clarify this issue. FLUX... Der Molen , PROC. OF 5th ANNUAL SEMINAR SOLDERING TECHNOLOGY, Naval Weapons Centre, China Lake, California, February 1981. 3. Burge, Perks, O’Brien...developed a new and innovative solution, which we believe to be a significant advance in the state of the art. In this new design (Fig.l) a FM DER

  19. 27. MPA-Seminar - Safety and reliability in energy technology. Vol. 2: Papers 27-45; 27. MPA-Seminar - Sicherheit und Verfuegbarkeit in der Energietechnik. Bd. 2: Vortraege 27-45

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The proceedings of the 27th MPA Seminar on 'Safety and Reliability in Energy Technology' were issued in two volumes. The main topics of the second volume are: 1. Material behaviour in the creep regime; 2. Fracture machanics; 3. Reliability analysis and 4. Failure analysis.

  20. Proceedings of the MINT R and D Seminar 2004: Innovation through excellence in R and D, Seminar A

    International Nuclear Information System (INIS)

    2004-01-01

    The papers presented in this seminar discussed the following areas: techniques, processes, characterization, infrastructures and products development, technology development, research and development management in MINT - Malaysian Institute for Nuclear Technology Research

  1. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 9: electronics, instrumentation and control

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 10 papers presented at the 6. Seminar of the IIE-ININ-IMP on technological specialities in the field of electronics, instrumentation and control. (Topic 9). From these, 4 papers were in INIS subject scope and a separate abstract was prepared for each of them

  2. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 14: systems and infomation services

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 9 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of information systems and services. (Topic 14). Two items were in INIS subject scope and a separate abstract was prepared for each of them

  3. Research report of FY 1997 on the environmentally acceptable coal utilization system feasibility survey. Clean coal technology model project seminar held in Thailand; 1997 nendo seika hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Tai ni okeru clean coal technology model jigyo seminar no kaisai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    To reduce SOx with coal utilization, the desulfurization seminar diffusing the demonstration project of simplified desulfurizer introduction was held at the site in Thailand. The purpose is to reduce the environmental pollutants and contribute to the effective utilization of energy with coal utilization in Thailand. Invitation letters were sent to users of coal and heavy oil boilers through the Department of Factories, Ministry of Industry, Thailand, to call participation in the seminar. Inspection of the desulfurizer introduced in the factory of Thai Union Paper Public was included in the seminar for diffusing the project. The inspection site is in the demonstration project site of simplified desulfurizer introduction. There were a lot of participants from Thai users and from Japan. The seminar included the presentations from NEDO, JETRO, FTI, and MOSTE, introduction of general technology for processes of ENAA desulfurizer, introduction of demonstration unit plan by IHI, and introduction of operation of demonstration unit by TUP. 31 figs., 6 tabs.

  4. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 11: standards and quality assurance

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 8 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of standards and quality assurance. (Topic 11). From these, 2 papers were in INIS subject scope and a separate abstract was prepared for each of them

  5. Effect of extrusion stem speed on extrusion process for a hollow aluminum profile

    International Nuclear Information System (INIS)

    Zhang, Cunsheng; Zhao, Guoqun; Chen, Zhiren; Chen, Hao; Kou, Fujun

    2012-01-01

    Highlights: ► Extrusion stem speed has significant effects on extrusion process. ► An optimum value of stem speed exists for uniform metal flow distribution. ► A higher stem speed leads to a higher required extrusion force. ► A high stem speed leads to an improved welding quality of aluminum profile. - Abstract: Extrusion stem speed is one of important process parameters during aluminum profile extrusion, which directly influences the profile quality and choice of extrusion equipments. In this paper, the extrusion process of a thin-walled hollow aluminum profile was simulated by means of the HyperXtrude commercial software. Through a serial of numerical simulation, the effects of stem speed on extrusion process, such as metal flow behavior at die exit, temperature distribution, extrusion force, and welding pressure, have been investigated. The numerical results showed that there existed an optimum value of stem speed for flow velocity distribution. With the increasing stem speed, the temperature of the extrudate and required extrusion force increased, and the welding quality of extrudate would be improved. Through comprehensive comparison and analysis, the appropriate stem speed could be determined for practical extrusion production. Thus, the research results could give effective guideline for determining initial billet and die temperature and choosing the proper extrusion press in aluminum profile industry.

  6. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 10: industrial applications of radiation and control

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 7 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of industrial applications of radiation and control. (Topic 10). A separate abstract was prepared for each paper

  7. The friction influence on stress in micro extrusion

    Directory of Open Access Journals (Sweden)

    J. Piwnik

    2010-01-01

    Full Text Available Manufacturing of metallic parts by forming methods is industrially widespread due to high production rate, high accuracy, dimension’s and shape’s repeatability and good surface quality. The application of metal extrusion methods for the production of micro parts is possible, but there are some technological problems caused by small dimensions. Size effect is appearing. One of size effect symptom in micro extrusion, is a significant influence of rough contact between workpiece and tool while processing. In the case of rough contact without friction, material flows in the vicinity of the die surface. In order to explain more accurately a friction distribution in this area, the plastic wave friction model is proposed. This paper analyses specifications of a metal extrusion in micro scale. Using the friction model, a substitute friction shear factor mz and its influence on extrusion loading curves is determined in relationship to size of asperities.

  8. Mini Seminar on Form Filling Ability of Self-Compacting Concrete

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm

    2005-01-01

    The Nordic mini-seminar “Form Filling Ability of Self-Compacting Concrete” took place on 3-4 November 2003 at the Danish Technological Institute in Taastrup, Denmark. The mini-seminar gathered 12 participants from Finland, Sweden, Norway and Denmark. The objective was to present and discuss recent...... developments of Self-Compacting Concrete in the Nordic countries. In general, the seminar included results and observations on the effect of fresh concrete behaviour, casting technique, and organisation on site on the filling ability, passing ability, and surface quality. The seminar had participants from...

  9. History of the RSIC seminar-workshops

    International Nuclear Information System (INIS)

    Maskewitz, B.F.

    1992-01-01

    The RSIC concept of the open-quote seminar-workshop close-quote as a means to review the state-of-the-art of specific computing technology and to transmit a great deal of information to a large number of people in a short period of time evolved over a 30-year period. This paper presents the background leading to the development of the concept and details the history of the seminars and workshops organized by RSIC staff members through the years, 1965 - 1992

  10. Proceedings of national executive management seminar on surface finishing by radiation curing technology: radiation curing for better finishing

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This book compiled the paper presented at this seminar. The papers discussed are 1. Incentives for investment in the manufacturing sector (in Malaysia) 2.Trends and prospect of surface finishing by radiation curing technology in Malaysia 3. Industrial application of radiation curing.

  11. Proceedings of national executive management seminar on surface finishing by radiation curing technology: radiation curing for better finishing

    International Nuclear Information System (INIS)

    1993-01-01

    This book compiled the paper presented at this seminar. The papers discussed are 1. Incentives for investment in the manufacturing sector (in Malaysia) 2.Trends and prospect of surface finishing by radiation curing technology in Malaysia 3. Industrial application of radiation curing

  12. Seminar on heat pump research and applications: proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Steele, R.V. Jr. (ed.)

    1984-11-01

    This volume is a compilation of papers prepared by speakers at a seminar on heat pumps. The seminar was organized by the Electric Power Research Institute (EPRI) in cooperation with Louisiana Power and Light Company and New Orleans Public Service, Inc. The seminar's purpose was to inform utility managers and engineers of the most recent developments in residential heat pump technology and applications. Statements by invited panelists on the outlook for heat pump technology are also included. The speakers, who represented key organizations in the heat pump area, including utilities, industry associations, manufacturers, independent research institutes, government, and EPRI, addressed the following topics: status of heat pump research and development, heat pump testing and rating; field monitoring of heat pumps; heat pump water heaters; heat pump reliability; and marketing programs for pumps. All papers, total of sixteen have been processed for inclusion in the Energy Data Base.

  13. International seminar on the safety research needs for Russian-designed reactors: material presented at the international seminar 1997

    International Nuclear Information System (INIS)

    1997-01-01

    This seminar on international, national and bilateral cooperation programmes on the safety research needs for Russian-designed reactors was held in Tokyo, Japan (1997) and hosted by the OECD Nuclear Energy Agency and the Science and Technology Agency (STA) of Japan. More than 70 participants attended the seminar. Represented were experts from OECD/NEA member countries and Russia, the International Atomic Energy Agency (IAEA), the ISTC, the INSC and the Russian INSC. Eighteen papers were presented in five sessions. The seminar was structured around four main areas of cooperation: cooperative programmes of the OECD/NEA, programmes of international organisations, bi-lateral programmes, and national programmes of OECD/NEA member countries having reactors of the VVER type. General conclusions, followed by specific technical conclusions are included

  14. Proceedings of the Fifth Seminar of High Temperature Reactor: The Role and Challenge with HTR Opportunity in the Twenty-first Century

    International Nuclear Information System (INIS)

    As-Natio-Lasman; Zaki-Su'ud; Bambang-Sugiono

    2000-11-01

    The Seminar in HTR Reactor has become routine activities held in BATAN since 1994. This Seminar is a continuation of the Seminar on Technology and HTR Application held by Centre for Development of Advanced Reactor System. The theme of the seminar is Role, Challenge, Opportunity of HTR in the Twenty-first Century. Thirteen papers presented in the seminar were collected into proceedings. The aims of the proceedings is to provide information and references on nuclear technology, mainly on HTR technology. (DII)

  15. 12th Czechoslovak seminar on plasma physics and technology

    International Nuclear Information System (INIS)

    1983-03-01

    The 12th Czechoslovak seminar on plasma physics and technology was oriented mainly to the problems of high-temperature plasmas and controlled thermonuclear fusion. The proceedings contain 27 invited papers and communications presented in three sections: 1) Inertial controlled fusion, 2) Tokamaks, 3) Theory and miscellaneous topics. The first group of papers deals with various problems of electron-beam, ion-beam, and laser fusion, including physical processes in fusion targets. The tokamak section discusses the latest experimental results achieved in the Russian tokamaks FT-2, Tuman 2-a, T-7 and T-10, in the Czechoslovak tokamak TM-1-MH, and in the Hungarian tokamak MT-1. A detailed survey is presented of work on neutral atom injectors in Novosibirsk. In the third section several papers on theoretical studies of nonlinear and turbulent processes in a hot plasma are presented together with a simulation study of a hybrid tokamak reactor. Several contributions on special diagnostic methods are presented. (J.U.)

  16. Proceedings of the National Seminar on Research and Nuclear Devices Management

    International Nuclear Information System (INIS)

    Prayitno; Slamet Santosa; Darsono; Syarip; Agus Taftazani; Samin; Tri Mardji Atmono; Dwi Biyantoro; Herry Poernomo; Prajitno; Tjipto Sujitno; Gede Sutresna W; Djoko Slamet Pujorahardjo; Budi Setiawan; Bambang Siswanto; Endro Kismolo; Jumari

    2016-08-01

    The Proceedings of the National Seminar on Research and Nuclear Devices Management by Center for Accelerator Science and Technology in Yogyakarta with the theme of Universities and research and development institutions synergy in the development of basic science and nuclear technology held on Surakarta 9 August 2016. This seminar is an annual routine activities of Center for Accelerator Science and Technology for exchange research result among University and BATAN researcher for using nuclear technology. The proceeding consist of 3 article from keynotes’ speaker and 23 articles from BATAN participant as well as outside which have been indexed separately. (MPN)

  17. effects of different grain starches as feed binders for

    African Journals Online (AJOL)

    users

    KEY WORDS: Grain Starches; Feed Binder, AQUA-Feed, Pelletability Water ... in their incorporation in on farm aqua feed and thus. 19 ..... International Seminar on Advanced Extrusion. Technology in Food Application, Sao Paulo. Brazil pp.

  18. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Wednesday 19 November From 9:30 to 17:30 - IT Amphitheatre bldg.31 3-004 2003 Data Transmission Design Seminar - TEXAS INSTRUMENTS The one-day 2003 Data Transmission Design Seminar is part of a series of technical seminars produced by Texas Instruments. This series of seminars will introduce system solutions based on different standards according to their respective requirements. It will include topics containing a blend of basic principles and hands-on application examples, along with layout-guidelines. • Basics and Practical Examples of Data-Transmission • Low Voltage Differential Signaling (LVDS) • Connectivity and PC-based Links • Industrial Interfaces • Parallel Bus Systems and Clock-Distribution-Circuits (CDC) This Seminar will be of interest to hardware designers and system engineers dealing with the realization of system- or board-level interfaces based on various transmission standards. Language: English Free seminar, no registration Organiser: John ...

  19. Balint seminars: the transatlantic experience through videoconference.

    Science.gov (United States)

    Antoun, Jumana; Romani, Maya; Johnson, Alan; Brock, Clive; Hamadeh, Ghassan

    2014-12-01

    The Balint seminar is used in many family medicine residencies to improve and strengthen the patient-doctor relationship: to make better doctors. Given the lack of Balint leaders in developing countries, the family medicine department at the American University of Beirut (AUB) decided to collaborate with the Medical University of South Carolina (MUSC)-with more than 30 years of experience-to start Balint seminars through videoconferencing. Evaluate the feasibility and effectiveness of Balint seminars conducted through videoconference. A qualitative research using focus group and leaders' feedback to evaluate feasibility of delivery of Balint seminars through videoconference. A Polycom videoconference was set up between residents at AUB and two credentialed Balint leaders at MUSC. The videoconference was composed of two parts: (i) MUSC faculty facilitating Balint seminars; and (ii) MUSC and AUB faculty debriefing following each Balint session. Twenty-six videoconferences were conducted from 15 February 2013 to 31 March 2014. Four themes emerged: technology and connectivity issues, administrative issues, coordination among different time zones and cultural/contextual issues. The videoconferencing with family medicine residents at AUB seemed quite natural and very familiar to the Balint leaders at MUSC. The seminars encouraged the residents to see things from the patients' perspective, inspiring new thoughts and ideas on how to deal with troubling patients. Videoconference Balint seminars offer a promising way to extend the activity to health care providers in other disciplines, states and countries. Moreover, this format has the potential to increase the number of trained Balint leaders. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  20. Proceedings of the nuclear safety seminar, 2011

    International Nuclear Information System (INIS)

    Amin S Zarkasih; Dhandang P; Rohadi A; Djarwani; Santoso; Abdul Waris; Zaki Su'ud; Sihana; Heryudo Kusumo; Yusri Heni; Yus Rusdian; Judi Pramono; Amil Mardha

    2011-06-01

    The Proceedings of the nuclear safety seminar by Nuclear Energy Regulatory Agency with the theme of strengthening in nuclear safety control, nuclear security and nuclear safeguard to Introduction of Nuclear Power Plant (NPP) in Indonesia held on Jakarta 27-28 June 2011. The seminar is an annual routine activities which organized by Nuclear Energy Regulatory Agency (BAPETEN) as an exchange for information from scientists and researchers for using nuclear technology. The proceeding consist of 4 articles from keynotes’ speaker and 39 articles from BAPETEN, BATAN and outside participants. (PPIKSN)

  1. Metal extrusion using hydrostatic pressures

    International Nuclear Information System (INIS)

    Sauve, Ch.

    1965-01-01

    The main problems connected with the deformation of metals due to extrusion are described. A method is put forward for calculating the rational rate of percentage deformation in the case of bar extrusion using a cylindrical container; reference is made to previous work on extrusion using a hydrostatic pressure with or without back-pressure. An extrusion process is described using hydrostatic pressure, without back-pressure, and using the lubricant for transmitting the thrust. This process has been used for eight years by the C.E.A. for the extrusion of a very wide range of metals, from beryllium to uranium and including steels; it leads to excellent surface textures. A very fine crystallization can be obtained on extruded products when the rate of extrusion is very low. There appears to be nothing against the use of high extrusion rates using this method. (author) [fr

  2. Proceedings of the Seminar on Environmental and Radiation Safety Aspect at Non-nuclear Industry

    International Nuclear Information System (INIS)

    Mulyadi Rachmad; Muhammad Fathoni; Topo Suprihadi, PY.; Dumais, Johannes Robert; Eri Hiswara; Alatas, Zubaidah; Dahlan, Kgs.; Muhammad Isnaini

    2003-03-01

    The Seminar on Environmental and Radiation Safety Aspect at Non-nuclear Industry held on March 2003 in Jakarta. The purpose of this Seminar be able to information exchange among research workers in National Nuclear Energy Agency. The Seminar discussed about Science and Technology of Radiation Safety and Environment. There are 17 papers which have separated index. (PPIN)

  3. Electromagnetic Simulation Seminar and Opera/Tosca update Seminar

    CERN Multimedia

    IT Department

    2012-01-01

    9 May 2012 Kjell Johnsen Auditorium – Room 30-7-018 Electromagnetic Simulation Seminar & Opera/Tosca update Seminar By Cobham Technical Services – Vector Fields Software Virtual prototyping using electromagnetic simulation software plays an important role in the design stage of many devices and the Opera software has been in use for this purpose at CERN for over a decade. A technical seminar will take place concerning the latest developments in electromagnetic design, analysis and multi-physics applications for large scientific experiments.  Information will be presented on applications such as superconducting magnets and ion-beam sources. The seminar will be presented by engineers/physicists from Cobham Technical Services – Vector Fields Software who develop the Opera program.  It is FREE to attend and is open to both current Opera software users and also those who wish to expand their knowledge and understand better the capabilities on offer. Prog...

  4. Astronomy Research Seminar

    Science.gov (United States)

    Johson, Jolyon; Genet, Russell; Armstrong, James; Boyce, Grady; Boyce, Pat; Brewer, Mark; Buchheim, Robert; Carro, Joseph; Estrada, Reed; Estrada, Chris; Freed, Rachel; Gillette, Sean; Harshaw, Richard; Hollis, Thomas; Kenney, John; McGaughey, Seven; McNab, Christine; Mohanan, Kakkala; Sepulveda, Babs; Wallace, Dan; Wallen, Vera

    2015-05-01

    Traditional science lectures and labs are often enhanced through project- and team-based learning. Some students go beyond these classroom studies by conducting research, often under the guidance of university professors. A one-semester astronomy research seminar was initiated in 2006 in collaboration with the community of professional and amateur double star astronomers. The result was dozens of jointly-authored papers published in the Journal of Double Star Observations and the Annual Proceedings of the Society of Astronomical Sciences. This seminar, and its affiliated community, launched a series of conferences and books, providing students with additional forums to share their double star research. The original seminar, and its derivatives, enhanced educational careers through college admissions and scholarships. To expand the seminar's reach, it was restructured from a few teams at one school, to many teams, each from a different school. A volunteer from each school became an assistant instructor. Most of them were seminar veterans, experienced astronomers, or science teachers. The assistant instructors, in turn, recruited enthusiastic students for their teams. To avoid student and instructor overload, the seminar focused on its three deliverables: a formal proposal, published paper, and public PowerPoint presentation. Future seminars may offer other astronomical research options such as exoplanet transit or eclipsing binary photometry.

  5. 33. MPA seminar 2007. Proceedings; 33. MPA Seminar 2007. Vortraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    In a single PDF file, the CD-ROM contains all papers presented at the 33. MPA Seminar in Stuttgart. Subjects: Life management of nuclear facilities: Materials, integrity analysis, fracture mechanics; Behaviour of welds; Material development and qualification for power plants with enhanced steam parameters; monitoring concepts (e.g. state monitoring of components, test concepts); Design of pipelines with flanged joints; Assembly and joining technology for flanged joints; Non-destructive testing in plant engineering; Materials for new nuclear reactors. Many of the papers are available as separate items in this database. [German] In einer einzigen PDF-Datei sind auf der CD-ROM alle Vortraege enthalten, die auf dem 33. MPA-Seminar in Stuttgart gehalten wurden. Die Themenschwerpunkte sind: Lebensdauermanagement kerntechnischer Anlagen - Werkstoffverhalten, Integritaetsanalyse, Bruchmechanik; Verhalten von Schweissverbindungen; Werkstoffentwicklung und -qualifizierung fuer Kraftwerke mit erhoehten Dampfparametern; Ueberwachungskonzepte (z.B. Zustandsueberwachung von Komponenten, Pruefkonzepte); Auslegung von Rohrleitungen mit Flanschverbindungen; Montage- und Dichtungstechnik fuer Flanschverbindungen; Zerstoerungsfreie Pruefung in der Anlagentechnik; Werkstoffe fuer neue Kernreaktoren. Ein grosser Teil der Vortraege wurde separat aufgenommen.

  6. Extrusion Processing of Raw Food Materials and by-products: A Review.

    Science.gov (United States)

    Offiah, Vivian; Kontogiorgos, Vassilis; Falade, Kolawole O

    2018-05-22

    Extrusion technology has rapidly transformed the food industry with its numerous advantages over other processing methods. It offers a platform for processing different products from various food groups by modifying minor or major ingredients and processing conditions. Although cereals occupy a large portion of the extruded foods market, several other types of raw materials have been used. Extrusion processing of various food groups, including cereals and pseudo cereals, roots and tubers, pulses and oilseeds, fruits and vegetables, and animal products, as well as structural and nutritional changes in these food matrices are reviewed. Value addition by extrusion to food processing wastes and by-products from fruits and vegetables, dairy, meat and seafood, cereals and residues from starch, syrup and alcohol production, and oilseed processing are also discussed. Extrusion presents an economical technology for incorporating food processing residues and by-products back into the food stream. In contemporary scenarios, rising demand for extruded products with functional ingredients, attributed to evolving lifestyles and preferences, have led to innovations in the form, texture, color and content of extruded products. Information presented in this review would be of importance to processors and researchers as they seek to enhance nutritional quality and delivery of extruded products.

  7. 1990 fuel cell seminar: Program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    This volume contains author prepared short resumes of the presentations at the 1990 Fuel Cell Seminar held November 25-28, 1990 in Phoenix, Arizona. Contained herein are 134 short descriptions organized into topic areas entitled An Environmental Overview, Transportation Applications, Technology Advancements for Molten Carbonate Fuel Cells, Technology Advancements for Solid Fuel Cells, Component Technologies and Systems Analysis, Stationary Power Applications, Marine and Space Applications, Technology Advancements for Acid Type Fuel Cells, and Technology Advancement for Solid Oxide Fuel Cells.

  8. Embedded Multimaterial Extrusion Bioprinting.

    Science.gov (United States)

    Rocca, Marco; Fragasso, Alessio; Liu, Wanjun; Heinrich, Marcel A; Zhang, Yu Shrike

    2018-04-01

    Embedded extrusion bioprinting allows for the generation of complex structures that otherwise cannot be achieved with conventional layer-by-layer deposition from the bottom, by overcoming the limits imposed by gravitational force. By taking advantage of a hydrogel bath, serving as a sacrificial printing environment, it is feasible to extrude a bioink in freeform until the entire structure is deposited and crosslinked. The bioprinted structure can be subsequently released from the supporting hydrogel and used for further applications. Combining this advanced three-dimensional (3D) bioprinting technique with a multimaterial extrusion printhead setup enables the fabrication of complex volumetric structures built from multiple bioinks. The work described in this paper focuses on the optimization of the experimental setup and proposes a workflow to automate the bioprinting process, resulting in a fast and efficient conversion of a virtual 3D model into a physical, extruded structure in freeform using the multimaterial embedded bioprinting system. It is anticipated that further development of this technology will likely lead to widespread applications in areas such as tissue engineering, pharmaceutical testing, and organs-on-chips.

  9. Fourth international seminar on horizontal steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Tuomisto, H. [ed.] [IVO Group, Vantaa (Finland); Purhonen, H. [ed.] [VTT, Espoo (Finland); Kouhia, V. [ed.] [Lappeenranta Univ. of Technology (Finland)

    1997-12-31

    The general objective of the International Seminars of Horizontal Steam Generator Modelling has been the improvement in understanding of realistic thermal hydraulic behaviour of the generators when performing safety analyses for VVER reactors. The main topics presented in the fourth seminar were: thermal hydraulic experiments and analyses, primary collector integrity, feedwater distributor replacement, management of primary-to-secondary leakage accidents and new developments in the VVER safety technology. The number of participants, representing designers and manufacturers of the horizontal steam generators, plant operators, engineering companies, research organizations, universities and regulatory authorities, was 70 from 10 countries.

  10. Fourth international seminar on horizontal steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Tuomisto, H [ed.; IVO Group, Vantaa (Finland); Purhonen, H [ed.; VTT, Espoo (Finland); Kouhia, V [ed.; Lappeenranta Univ. of Technology (Finland)

    1998-12-31

    The general objective of the International Seminars of Horizontal Steam Generator Modelling has been the improvement in understanding of realistic thermal hydraulic behaviour of the generators when performing safety analyses for VVER reactors. The main topics presented in the fourth seminar were: thermal hydraulic experiments and analyses, primary collector integrity, feedwater distributor replacement, management of primary-to-secondary leakage accidents and new developments in the VVER safety technology. The number of participants, representing designers and manufacturers of the horizontal steam generators, plant operators, engineering companies, research organizations, universities and regulatory authorities, was 70 from 10 countries.

  11. Fourth international seminar on horizontal steam generators

    International Nuclear Information System (INIS)

    Tuomisto, H.; Purhonen, H.; Kouhia, V.

    1997-01-01

    The general objective of the International Seminars of Horizontal Steam Generator Modelling has been the improvement in understanding of realistic thermal hydraulic behaviour of the generators when performing safety analyses for VVER reactors. The main topics presented in the fourth seminar were: thermal hydraulic experiments and analyses, primary collector integrity, feedwater distributor replacement, management of primary-to-secondary leakage accidents and new developments in the VVER safety technology. The number of participants, representing designers and manufacturers of the horizontal steam generators, plant operators, engineering companies, research organizations, universities and regulatory authorities, was 70 from 10 countries

  12. Proceedings of the USNRC/EPRI/ANL heated crevice seminar.

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. Y.; Fruzzetti, K.; Muscara, J.; Diercks, D. R.; Energy Technology; EPRI; USNRC

    2003-08-31

    An international Heated Crevice Seminar, sponsored by the Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Argonne National Laboratory, and the Electric Power Research Institute, was held at Argonne National Laboratory on October 7-11, 2002. The objective of the seminar was to provide a working forum for the exchange of information by contributing experts on current issues related to corrosion in heated crevices, particularly as it relates to the integrity of PWR steam generator tubes. Forty-five persons from six countries attended the seminar, including representatives from government agencies, private industry and consultants, government research laboratories, nuclear vendors, and electrical utilities. The seminar opened with keynote talks on secondary-side crevice environments associated with IGA and IGSCC of mill-annealed Alloy 600 steam generator tubes and the submodes of corrosion in heat transfer crevices. This was followed by technical sessions on (1) Corrosion in Crevice Geometries, (2) Experimental Methods, (3) Results from Experimental Studies, and (4) Modeling. The seminar concluded with a panel discussion on the present understanding of corrosive processes in heated crevices and future research needs.

  13. 2. National Seminar on Acceptance and Trade of Irradiated Foods. Proceedings

    International Nuclear Information System (INIS)

    1997-01-01

    This proceedings is a compilation of 18 papers presented at the National Seminar on Acceptance and Trade of Irradiated Food, held in Toluca, Mexico, 27-29 October 1997. It generally deals with international and national legal, technological, health and commercial aspects of food irradiation. Public confidence and consumer acceptance of irradiated food stuff is also the subject of the seminar

  14. 30. MPA-Seminar 'Safety and reliability in energy technology' in conjunction with the 9th German-Japanese seminar. Vol. 2 (Papers 27-53)

    International Nuclear Information System (INIS)

    Roos, E.

    2004-01-01

    he 30th MPA-seminar on ''Safety and Availability in Energy Engineering'' was held in conjuction with the 9th German-Japanese Seminar. The 52 contributions were published in two volumes. Volume 1 contains the contributions to the following sessions: fracture mechanics, fatigue, welding, environmental impact and European research projects. Volume 2 contains contributions of sessions 6-9: high-temperature application, modelling-simulation, ageing management and non-destructive testing. (uke)

  15. 30. MPA-Seminar 'Safety and reliability in energy technology' in conjunction with the 9th German-Japanese seminar. Vol. 1 (Papers 1-26)

    International Nuclear Information System (INIS)

    Roos, E.

    2004-01-01

    The 30th MPA-seminar on ''Safety and Availability in Energy Engineering'' was held in conjuction with the 9th German-Japanese Seminar. The 52 contributions were published in two volumes. Volume 1 contains the contributions to the following sessions: fracture mechanics, fatigue, welding, environmental impact and European research projects. Volume 2 contains contributions of sessions 6-9: high-temperature application, modelling-simulation, ageing management and non-destructive testing. (uke)

  16. Proceedings of the distribution automation seminar. CD-ROM ed.

    International Nuclear Information System (INIS)

    2003-01-01

    Electric utilities are being driven to improve the utilization of their distribution system assets while reducing life cycle costs. This seminar provided an opportunity for electric utilities to share their experience and knowledge about the constantly evolving technologies that apply to distributed automation. Customers and their representatives place increased priority on regulatory commissions to achieve reliability and push the conventional use of distribution automation into rural areas. Various options are under consideration by managers to incorporate a variety of distributed generation resources. Several papers highlighted technical aspects as they relate to applications to meet the changing needs of utilities. The latest products and technologies in the field were on display. The seminar sessions included: business cases; utility experience and applications; utility experience and projects; and, technology and equipment. Eight presentations were indexed separately for inclusion in this database

  17. Etching Behavior of Aluminum Alloy Extrusions

    Science.gov (United States)

    Zhu, Hanliang

    2014-11-01

    The etching treatment is an important process step in influencing the surface quality of anodized aluminum alloy extrusions. The aim of etching is to produce a homogeneously matte surface. However, in the etching process, further surface imperfections can be generated on the extrusion surface due to uneven materials loss from different microstructural components. These surface imperfections formed prior to anodizing can significantly influence the surface quality of the final anodized extrusion products. In this article, various factors that influence the materials loss during alkaline etching of aluminum alloy extrusions are investigated. The influencing variables considered include etching process parameters, Fe-rich particles, Mg-Si precipitates, and extrusion profiles. This study provides a basis for improving the surface quality in industrial extrusion products by optimizing various process parameters.

  18. Deformations in micro extrusion of metals

    Directory of Open Access Journals (Sweden)

    J. Piwnik

    2010-07-01

    Full Text Available Production technologies of small dimensions metallic elements are known for a long time. They are produced by machining methods:turning, milling, polishing. Recently, methods for manufacturing small details by forming are developed – microforming. This process ischaracterized by the high dimensions accuracy and the surface smoothness of received items and the high production rate. When a forming process is scaled down to micro dimensions, the microstructure of the workpiece, the surface topology of the workpiece and that of the tooling remain unchanged. Size effect is appearing. This paper analyses specifications of a metal extrusion in micro scale. To determine the impact of the tool surface roughness on deformation process the numerical model of roughness as triangle wave were developed. In paper the influence of the wave presence on the material flow is described. Impact of the forming conditions on extrusion forces there is also characterized.

  19. effectof extrusion conditions on aflatoxin content of corn–peanut flakes

    African Journals Online (AJOL)

    Aynadis

    metabolites which can be observed on food stuffs or ... Extrusion cooking technologies are used to ..... effective interaction to reduce aflatoxin B1in the ..... Drug. Administration, “Guidance for industry: Action levels for poisonous or deleterious.

  20. Geneva University - Particle Physics Seminars

    CERN Multimedia

    Université de Genève

    2010-01-01

    GENEVA UNIVERSITY École de physique Département de physique nucléaire et corspusculaire 24, quai Ernest-Ansermet 1211 GENÈVE 4 Tél. (022) 379 62 73 Fax: (022) 379 69 92 Wednesday 13 October 2010 PARTICLE PHYSICS SEMINAR at 17.00 hrs – Stückelberg Auditorium Exotic hadrons, Light Higgs and Dark Forces at BABAR Dr. Bertrand Echenard / California Institute of Technology From spectroscopy to search new physics, B-factories have explored many exciting topics besides establishing CP-violation in B decays. We will review recent results on spectroscopy, exotic hadrons and search for light Higgs. Current searches for dark forces and GeV-scale dark matter particles will also be discussed. Information : http://dpnc.unige.ch/seminaire/annonce.html Organizer : G. Pasztor Wednesday 20 October 2010 PARTICLE PHYSICS SEMINAR at 17.00 hrs – Stückelberg Auditorium The MINOS Experiment, Results and Future Plans Pro...

  1. The reactive extrusion of thermoplastic polyurethane

    NARCIS (Netherlands)

    Verhoeven, Vincent Wilhelmus Andreas

    2006-01-01

    The objective of this thesis was to increase the understanding of the reactive extrusion of thermoplastic polyurethane. Overall, several issues were identified: • Using a relative simple extrusion model, the reactive extrusion process can be described. This model can be used to further investigate

  2. Virtual Seminar Room

    DEFF Research Database (Denmark)

    Forchhammer, Søren Otto; Fosgerau, Anders; Hansen, Peter Søren Kirk

    1999-01-01

    The initial design considerations and research goals for an ATM network based virtual seminar room with 5 sites are presented.......The initial design considerations and research goals for an ATM network based virtual seminar room with 5 sites are presented....

  3. Electronic Science Seminar

    Directory of Open Access Journals (Sweden)

    Geidarov P.Sh.

    2015-09-01

    Full Text Available The structure of electronic scientific seminar, which provides a high level of quality of the objectivity in the evaluation of scientific papers, including dissertations, is described. Conditions for the implementation of electronic scientific seminar are also considered.

  4. MINT R and D 2006 Seminar: compilation of papers

    International Nuclear Information System (INIS)

    2006-09-01

    The papers presented in this seminar discussed the following areas: techniques, processes, characterization, infrastructures and products development, technology development, instrumentation, research and development management in MINT - Malaysian Institute for Nuclear Technology Research. It covered the following subjects: environment, agriculture and biotechnology, advanced materials, nanotechnology; reactor application, safety, medicine and biotechnology, alternative energy, and ICT

  5. Progression to surgery: online versus live seminar.

    Science.gov (United States)

    Miletics, Maureen; Claros, Leonardo; Stoltzfus, Jill; Davis, Terri; Chaar, Maher El

    2018-03-01

    The objective of this study was to evaluate progression to surgery rates for live and online seminar and assess weight loss outcome comparisons at 1-year postoperation. University Hospital Network, Allentown, PA, USA. The entry point into our program was an information seminar where prospective patients are educated about obesity, bariatric surgery, indications and contraindications, risks and benefits, and our center's process. Between January of 2009 and November of 2011, only live information seminars were offered. In November of 2011, we started offering an online information seminar to reach those who are unable to attend a live seminar. Tracking of live versus online seminar attendance was documented in our database. Between November 1, 2011 and September 30, 2015, 3484 people completed an information seminar. Of those, 2744 attendees came to a live seminar while 740 completed the online seminar. A significantly higher number of live seminar attendees, 78.1% (2144/2744) progressed to an office visit compared with online seminar attendees 66.5% (492/740), Ponline attendees (Ponline seminar, P = .65) and initial body mass index (46.3 ± 7.4 for live seminar versus 45.3 ± 7.1 for online seminar, P = .09) were very similar between the groups. Online seminar attendees' age (42.7 ± 12.1) was younger than that of the live seminar attendees' (47.3 ± 12.3) (P<.0001) but has little clinical value. Our results demonstrated that live seminar attendees are more likely to progress to surgery and therefore should continue to be offered. Copyright © 2018 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  6. Extrusion cooking technology: Principal mechanism and effect on direct expanded snacks – An overview

    Directory of Open Access Journals (Sweden)

    Ajita Tiwari

    2017-04-01

    Full Text Available The snack industry is one of the fastest growing food sectors and is an important contributor within the global convenience food market. Nowadays snacks and convenience foods are also consumed regularly in India. Properly designed convenience foods can make an important contribution to nutrition in societies where social changes are altering traditional patterns of food preparation. Extrusion cooking as a popular means of preparing snack foods based on cereals and plant protein foodstuff has elicited considerable interest and attention over the past 30 years. Several studies on the extrusion of cereals and pulses, using various proportions, have been conducted because blends of cereals and pulses produce protein enriched products. Special importance is placed on the physicochemical and chemical modifications of protein, starch and dietary fibre. Extruded products can be categorized for a particular application based on their functional properties such as water absorption and water solubility index, expansion ratio, bulk density and viscosity of the dough.Therefore, the literature was reviewed for effect of extrusion processing on product parameters, and nutritional and anti-nutritional properties of extruded products.

  7. Proceedings of the International Seminar on Electric Power Conservation

    International Nuclear Information System (INIS)

    1989-01-01

    The experiences from 10 different countries on energy conservation are discussed in this seminar. Electric power conservation in Brazil, conservation in commercial sector, comparison between international programs and new technology are also included. (M.V.M.)

  8. EUROTHERM Seminar No. 18

    CERN Document Server

    Heggs, Peter; Butterworth, David

    1992-01-01

    The Eurotherm Committee was created in 1986 from member countries of the European Community. It has the purpose of organising and coordinating scientific events such as seminars and conferences in the thermal sciences. The series of Eurotherm Seminars established by the Committee has become a popular forum for high-level scientific and technical interchange of ideas in a wide range of specialist topics. While the presentation and publication of papers at the Seminars are encouraged, the primary aim is to stimulate discussion and liaison between specialist groups. The present Chairman of Eurotherm is Professor C.J. Hoogendoorn of the Technical University, Delft (Fax [NL] 15, 783251). Information on Mure Seminars is available from the Secretary, Keith Cornwell, Heriot-Watt University, Edinburgh (Fax [UK] 31, 451, 3129). This particular Seminar No. 18 on the Design and Operation of Heat Exchangers was the first one on this topic and was held at the Universitat der Bundeswehr Hamburg (University of the Federal Ar...

  9. Fiscal 2000 feasibility research on environmentally friendly coal utilization system. Seminar holding project (China: Zaozhuang, Yanshan, Jianshan, Jinzhou); 2000 nendo kankyo chowagata sekitan riyo system kanosei chosa hokokusho. Seminar kaisai jigyo (Chugoku Zhaozhuang, Yanshan, Jianshan, Jinzhou)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Seminars were held in China for the delivery of reports on the results of model projects with a view to popularizing the results of the clean coal technology model projects, which had been completed, for the purpose of contributing to the improvement on coal utilization technology and to the enhancement of environmental protection. The seminars took place at the sites of demonstration model projects just completed in China, namely, Zhejiang Huba Corporation (low-grade coal combustion system); Chaili Colliery, Zaozhuang Coal Mining Administration (CFBC - circulating fluidized bed combustion); Jinzhou Heat Power General Co., Ltd. (CFBC); and Beijing Yanshan Petrochemical Corporation (desulfurizing agent-added coal-water mixture system). At each of the project implementation sites, lectures were given on technical matters, technical know-how was exchanged, and study tours were organized to facilities concerned, which meant to promote the diffusion of the related technologies throughout China and, eventually, to contribute to the enhancement of environmental protection. The main subjects at the seminars included the introduction of GAP (green aid plan) projects in China, introduction of the outlines of technologies related to the model projects, verification and achievements, latest trends, and measures for the diffusion of the technologies. Study tours were made, and videos were shown relating to the local conditions. Every one of the seminars was successfully attended by 60-70 participants. (NEDO)

  10. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

  11. Proceedings of the national seminar on advanced construction techniques and geotechnical engineering

    International Nuclear Information System (INIS)

    Partheeban, P.; Poornima, C.A.; Guru, V.

    2015-02-01

    The objective of this seminar is to emphasize the need for developing modern construction materials in the era of technology. It also provides a forum for National Research Scholars, Construction Specialists and Professionals, Planners, Faculty, PG and UG Students to discuss and evolve solutions for various difficulties faced during construction. Theme of seminar includes Geotechnical site Investigation, Ground improvement Techniques, Soil Dynamics, Geotechnical Earthquake Engineering, Geo- Environmental Engineering, Self Compacting Concrete, Geopolymer Concrete and Concrete Technology, Cost Effective Construction Techniques, Limit state performance state approach Elastic and Elasto-plastic behavior and Reduction of Corrosion in concrete using Chemical admixtures. Paper relevant to INIS are indexed separately

  12. Proceedings of the 11. annual mining industry learning seminar : 2006 equipment evolutions

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, T. [Alberta Univ., Edmonton, AB (Canada). School of Mining and Petroleum Engineering] (comp.)

    2006-07-01

    This seminar provided a forum for mine engineers, geologists, operators, vendors and academics to discuss various topics on equipment evolution that address mining industry concerns. Participants included those who are involved in mine planning, equipment selection, operations and maintenance. The presentations identified possible solutions to ongoing issues and alternative technologies emerging in the mining industry. Operators and original equipment manufacturers shared their innovations in novel developments and presented solutions to issues relevant to mining processes including truck and shovel technology issues such as tires, lube and fuel emissions. The seminar featured 17 presentations, of which 5 have been catalogued separately for inclusion in this database. tabs., figs.

  13. Proceedings of the Third EPRI Phased Array Ultrasound Seminar

    International Nuclear Information System (INIS)

    2003-01-01

    Phased array technology for ultrasonic examination is providing innovative solutions for nuclear in-service examination applications. EPRI has been a prime mover in the development and deployment of phased array ultrasound applications in the domestic nuclear market over the past decade. As part of this strategic effort, EPRI has hosted a series of seminars on phased array technology and its applications

  14. Características tecnológicas de farinhas de arroz pré-gelatinizadas obtidas por extrusão termoplástica Technological properties of pre-gelatinized rice flour obtained by thermoplastic extrusion

    Directory of Open Access Journals (Sweden)

    Maria Teresa Pedrosa Silva Clerici

    2008-10-01

    for thermoplastic extrusion. The GRF was extruded using a Brabender single screw extruder, varying moisture (19.2 - 24.8% and extrusion temperature (108 - 192ºC. Torque, expansion index (EI, viscographic properties, water absorption index (WAI, and water solubility index (WSI characteristics of GRF were analyzed using response surface methodology (RSM and main component analysis (PCA. The results, analyzed by MRS and PCA, indicated that during the process, the values of torque and EI increased when lower moisture was used. Considering viscographic properties, GRF presented a higher initial viscosity of the starch paste when in higher temperatures, while viscosities at 95ºC and at 50ºC increased when temperature and moisture were at extreme opposites. WAI decreased when lower temperatures and higher moisture were used. WSI was not influenced by temperature and moisture when analyzed using MRS, but with PCA, there was an increase when temperatures ranged between 120 - 150ºC and moisture between 19.2 - 22%. In conclusion, both MRS and PCA analysis showed that a variation in the technological properties of GRF were related to the use of opposite extremes of temperature and/or moisture during the extrusion process, and the PCA was able to complete the analysis done using MRS.

  15. 75 FR 80527 - Aluminum Extrusions From China

    Science.gov (United States)

    2010-12-22

    ...)] Aluminum Extrusions From China AGENCY: United States International Trade Commission. ACTION: Scheduling of... of subsidized and less-than-fair-value imports from China of aluminum extrusions, primarily provided... contained in Aluminum Extrusions From the People's Republic of China: Notice of Preliminary Determination of...

  16. Seminar 2.0: Learning With Skype and Video Podcasts

    Science.gov (United States)

    Wessel, Paul; Anderson, Tiffany; Austin, Regan; Benediktsdottir, Asdis; Chandler, Michael T.; Conley, Michaela M.; Kim, Seung-Sep; Michaud, Robert L.; Rumpf, M. Elise; Sleeper, Jonathan D.; Weiss, Jonathan R.

    2009-04-01

    Graduate seminars typically involve reviewing key papers, ranging from seminal contributions by pioneers to the latest cutting-edge results published in journals such as Nature, Science, and Geophysical Research Letters. Ideally, guest lecturers are invited to add specific expertise and stimulate discussions. However, the increasing costs for travel make this an expensive proposition. Recent improvements in free videoconferencing over the Internet make it possible to invite distant experts to participate in seminars without involving expensive and time-consuming travel. Tools to record video conferences allow anyone to combine narrations with slide presentations and prepare merged video files for distribution over the Internet (i.e., podcasts). This brief report discusses such an experiment in a graduate seminar on advanced plate tectonics in the Department of Geology and Geophysics at University of Hawai`i at Manoa's (UHM) School of Ocean and Earth Science and Technology (SOEST). The podcasts are freely available from iTunes (UHM; SOEST; Public Course Lectures) and from http://www.soest.hawaii.edu/pwessel/podcasts.

  17. Modeling And Simulation Of Combined Extrusion For Spark Plug Body Parts

    Science.gov (United States)

    Canta, T.; Noveanu, D.; Frunza, D.

    2004-06-01

    The paper presents the modeling and simulation for the extrusion technology of a new type of spark plug body for Dacia Supernova car. This technology was simulated using the finite elements modeling and analysis SuperForm software, designed for the simulation of plastic deformation processes. There is also presented a comparison between the results of the simulation and the industrial results.

  18. Hydrostatic extrusion of magnesium alloys

    NARCIS (Netherlands)

    Sillekens, W.H.; Bohlen, J.

    2012-01-01

    This chapter deals with the capabilities and limitations of the hydrostatic extrusion process for the manufacturing of magnesium alloy sections. Firstly, the process basics for the hydrostatic extrusion of materials in general and of magnesium in particular are introduced. Next, some recent research

  19. Prediction of extrusion die wear by use of an artificial neural network

    International Nuclear Information System (INIS)

    Naidim, O.; Epureanu, A.; Tabacaru, V.

    2000-01-01

    In its vision of designing a technology, the process of optimisation of a material extrusion is an on-line process. The tool life is an important factor in selecting the objective function that represents the cost of the extruded product. This work is intended to realise the prediction of die wear evolution within the extrusion process, based on information obtained from numerical modelling. In order to reduce the number of experiments and to realise a flexible process of designing the necessary tools for an extrusion process, finite element (FE) modelling was used to determine designing space against the shape of the extruded product, the work conditions, the material and wear conditions. The information generated using FE was then used to train a neural network using backpropagation algorithm. Parameters considered in constructing neural networks include error tolerance, the factor of estimation of the 'best solution', the number of training cycles and the number of hidden layers. A general formula of calculus applicable in any extrusion process can be determined by establishing a relation between the stress state obtained within the extrusion process, deformation speed and friction on one hand, and wear on the other hand. The (1/W) parameter, where W is the tool wear in the active zone of the extrusion die, is a measure taken into account in calculating the die life as written in (1); this is the reason why it is important to make prediction of W value for geometries used in designing process or to optimise the die shape in order to reduce wear. (author)

  20. Effect of combined extrusion parameters on mechanical properties of basalt fiber-reinforced plastics based on polypropylene

    Science.gov (United States)

    Bashtannik, P. I.; Ovcharenko, V. G.; Boot, Yu. A.

    1997-11-01

    Basalt fibers are efficient reinforcing fillers for polypropylene because they increase both the mechanical and the tribotechnical properties of composites. Basalt fibers can compete with traditional fillers (glass and asbestos fibers) of polypropylene with respect to technological, economic, and toxic properties. The effect of technological parameters of producing polypropylene-based basalt fiber-reinforced plastics (BFRPs) by combined extrusion on their mechanical properties has been investigated. The extrusion temperature was found to be the main parameter determining the mechanical properties of the BFRPs. With temperature growth from 180 to 240°C, the residual length of the basalt fibers in the composite, as well as the adhesive strength of the polymer-fiber system, increased, while the composite defectiveness decreased. The tensile strength and elastic modulus increased from 35 to 42 MPa and 3.2 to 4.2 GPa, respectively. At the same time, the growth in composite solidity led to its higher brittleness. Thus, a higher temperature of extrusion allows us to produce materials which can be subjected to tensile and bending loads, while the materials produced at a lower temperature of extrusion are impact stable. The effect of the gap size between the extruder body and moving disks on the mechanical properties of the BFRPs is less significant than that of temperature. An increase of the gap size from 2 to 8 mm improves the impregnation quality of the fibers, but the extruder productivity diminishes. The possibility of controling the properties of reinforced polypropylene by varying the technological parameters of combined extrusion is shown. The polypropylene-based BFRPs produced by the proposed method surpass the properties of glass and asbestos fiber-reinforced plastics.

  1. 7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts; 7. Seminario anual de iniciacao cientifica do Centro de Desenvolvimento da Tecnologia Nuclear. Resumos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques.

  2. How extrusion shapes food processing

    Science.gov (United States)

    This month's column will explore food extrusion. Extrusion is one of the most commonly used food manufacturing processes. Its versatility enables production of a diverse array of food products. This column will review the basic principles and provide an overview of applications. I would like to ...

  3. Application of extrusion technology to prepare bread crumb, a comparison with oven method

    International Nuclear Information System (INIS)

    Pasha, I.; Asim, M.

    2015-01-01

    The current research project was designed to conclude the upshot of extrusion cooking temperature on the properties and acceptability of bread crumb. Bread crumbs were obtained by drying the bread, maintaining moisture up to 3-8% and then broken down using hammer mill or crusher which breaks the bread into bread crumbs. Significantly highest moisture contents 7.26% was observed in oven baked bread crumb as compared to 6.25% in bread crumb prepared by extrusion cooking method. The highest bulk density (28.13 g/100 L) was observed in extruded bread crumb whereas, the oven baked bread crumbs showed lower bulk density (7.03 g/100 L). The fat uptake of extruded and oven baked bread crumbs were found 0.516 mg/g and 0.493 mg/g, respectively. The extruded bread crumb showed higher water binding capacity as 34.76 g H/sub 2/O/kg as compared to oven baked bread crumb which showed 27.92 g H/sub 2/O/kg. Sensory evaluation of extruded and oven baked bread crumbs depicted that bread crumbs prepared from extrusion cooking methods got significantly higher scores for taste, flavour and over all acceptability as compared to those prepared by oven baked method. As far as crispiness is concerned oven baked bread crumbs got comparatively higher scores. Moreover, it was concluded that the treatment T2 of extruded bread crumbs got more sensory scores than oven baked bread crumbs. (author)

  4. Proceedings of the third JAERI-KAERI joint seminar on post irradiation examination technology

    International Nuclear Information System (INIS)

    1999-09-01

    Between the Department of JMTR of the Japan Atomic Energy Research Institute (JAERI) and the Nuclear Fuel Cycle Research Group of the Korea Atomic Energy Research Institute (KAERI), it has been periodically carried out the collaboration on technical information exchange by specialists and scientists, under the Arrangement of the Implementation of Cooperative Research Program in the Field of Peaceful Uses of Nuclear between JAERI and KAERI. And JAERI-KAERI joint seminar has been held every three years. The 1st and 2nd JAERI-KAERI Joint Seminars were held in November 1992 at JAERI and in September 1995 at KAERI, respectively. The 3rd JAERI-KAERI Joint Seminar was held on 25 and 26 March, 1999 at the Oarai Research Establishment of JAERI. In this seminar, total participants of 84 were joined from JAERI, KAERI, Hanyang University, Japan Nuclear Cycle Development Institute, Oarai Branch of Institute for Materials Research (IMR) of Tohoku University, Nippon Nuclear Fuel Development Co., Ltd., Nuclear Development Corporation and others. Contributed presentations were in three sessions; Current status and future perspectives on PIE, PIE techniques and Evaluation of PIE data. Re-assembling technique for JOYO fuel, Nd-YAG laser welding technique, grain boundary analysis using FEG-TEM, lift time estimation of PWR Rod Cluster Control Assembly (RCCA) rodlet and failure analysis of Korea Nuclear Power Plant (KNP) fuel have been widely noticed as topic items on PIE. And some comments from PIE user, were pointed out that the nano-PIE technique, the flexibility to ad-hoc demands on testing space or utilization, and the international collaboration were very important for the next generation's PIE. The 34 of the present papers are indexed individually. (J.P.N.)

  5. Proceedings of the third JAERI-KAERI joint seminar on post irradiation examination technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    Between the Department of JMTR of the Japan Atomic Energy Research Institute (JAERI) and the Nuclear Fuel Cycle Research Group of the Korea Atomic Energy Research Institute (KAERI), it has been periodically carried out the collaboration on technical information exchange by specialists and scientists, under the Arrangement of the Implementation of Cooperative Research Program in the Field of Peaceful Uses of Nuclear between JAERI and KAERI. And JAERI-KAERI joint seminar has been held every three years. The 1st and 2nd JAERI-KAERI Joint Seminars were held in November 1992 at JAERI and in September 1995 at KAERI, respectively. The 3rd JAERI-KAERI Joint Seminar was held on 25 and 26 March, 1999 at the Oarai Research Establishment of JAERI. In this seminar, total participants of 84 were joined from JAERI, KAERI, Hanyang University, Japan Nuclear Cycle Development Institute, Oarai Branch of Institute for Materials Research (IMR) of Tohoku University, Nippon Nuclear Fuel Development Co., Ltd., Nuclear Development Corporation and others. Contributed presentations were in three sessions; Current status and future perspectives on PIE, PIE techniques and Evaluation of PIE data. Re-assembling technique for JOYO fuel, Nd-YAG laser welding technique, grain boundary analysis using FEG-TEM, lift time estimation of PWR Rod Cluster Control Assembly (RCCA) rodlet and failure analysis of Korea Nuclear Power Plant (KNP) fuel have been widely noticed as topic items on PIE. And some comments from PIE user, were pointed out that the nano-PIE technique, the flexibility to ad-hoc demands on testing space or utilization, and the international collaboration were very important for the next generation's PIE. The 34 of the present papers are indexed individually. (J.P.N.)

  6. Wood pellet seminar

    International Nuclear Information System (INIS)

    Aarniala, M.; Puhakka, A.

    2001-01-01

    The objective of the wood pellet seminar, arranged by OPET Finland and North Karelia Polytechnic, was to deliver information on wood pellets, pellet burners and boilers, heating systems and building, as well as on the activities of wood energy advisors. The first day of the seminar consisted of presentations of equipment and products, and of advisory desks for builders. The second day of the seminar consisted of presentations held by wood pellet experts. Pellet markets, the economy and production, the development of the pellet markets and their problems (in Austria), the economy of heating of real estates by different fuel alternatives, the production, delivery and marketing of wood pellets, the utilization of wood pellet in different utilization sites, the use of wood pellets in detached houses, pellet burners and fireplaces, and conversion of communal real estate houses to use wood pellets were discussed in the presentations. The presentations held in the third day discussed the utilization of wood pellets in power plants, the regional promotion of the production and the use of pellets. The seminar consisted also of visits to pellet manufacturing plant and two pellet burning heating plants

  7. Seminar series on Safety matters

    CERN Multimedia

    HSE

    2010-01-01

    The HSE - Occupational Health & Safety and Environmental Protection - Unit is starting a seminar series on Safety matters. The aim is to invite colleagues from Universities, Industries or Government Agencies to share their experience. The seminars will take place in intervals of several months. Part of the Seminars will be held in the form of a Forum where participants can discuss and share views with persons who manage, teach or research Safety matters elsewhere. You are invited to the first Safety Seminar on 22nd September 2010 at 10h00 in building 40 S2 A1 "Salle Andersson" L’Ecole Polytechnique Fédérale de Lausanne (EPFL) will present the way safety is managed in their research institution. Some aspects of research in physics and chemical laboratories will also be presented. The seminar will be given by Dr Thierry Meyer, Head of OHS at FSB-EPFL and Dr Amela Groso, responsible for the safety of the physics institutes

  8. SMiRT 23. 14{sup th} international seminar on fire safety in nuclear power plants and installations

    Energy Technology Data Exchange (ETDEWEB)

    Roewekamp, Marina (ed.) [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Koeln (Germany); Berg, Heinz-Peter [Bundesamt fuer Strahlenschutz, Salzgitter (Germany)

    2015-12-15

    In the frame of the project 3614R01575 funded by the German Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (Bundesministerium fuer Umwelt, Naturschutz, Bau und Reaktorsicherheit, BMUB) the meanwhile fourteenth international seminar on ''Fire Safety in Nuclear Power Plants and Installations'' has been conducted as P ost-Conference Seminar of the 23{sup rd} International Conference on Structural Mechanics In Reactor Technology (SMiRT 23) in Salford, United Kingdom in August 2015. The following seminar proceedings contain the entire twenty-one technical contributions to the two day s seminar with in total fifty-five participants from ten countries in Asia, Europe and America.

  9. 27 CFR 6.94 - Educational seminars.

    Science.gov (United States)

    2010-04-01

    ... OF THE TREASURY LIQUORS âTIED-HOUSEâ Exceptions § 6.94 Educational seminars. An industry member may give or sponsor educational seminars for employees of retailers either at the industry member's... equipment, training seminars for employees of retailers, or tours of industry member's plant premises. This...

  10. Reduction of fumonisin B₁ in corn grits by twin-screw extrusion.

    Science.gov (United States)

    Jackson, Lauren S; Jablonski, Joseph; Bullerman, Lloyd B; Bianchini, Andreia; Hanna, Milford A; Voss, Kenneth A; Hollub, April D; Ryu, Dojin

    2011-08-01

    This study was designed to investigate the fate of fumonisins in flaking corn grits during twin-screw extrusion by measuring fumonisin B₁ (FB₁) and its analogs with a mass balance approach. Food grade corn grits and 2 batches of grits contaminated with FB₁ at 10 and 50 μg/g by Fusarium verticillioides M-2552 were processed with or without glucose supplementation (10%, w/w) with a twin-screw extruder. Extrusion reduced FB₁ in contaminated grits by 64% to 72% without glucose and 89% to 94% with added glucose. In addition, extrusion alone resulted in 26% to 73% reduction in the levels of fumonisin B₂ and fumonisin B₃, while levels of both mycotoxins were reduced by >89% in extruded corn grits containing 10% glucose. Mass balance analysis showed that 38% to 46% of the FB₁ species detected in corn extruded with glucose was N-(deoxy-D-fructos-1-yl)-FB₁, while 23% to 37% of FB₁ species detected in extruded corn grits with and without added glucose was bound to the matrix. It was also found that the hydrolyzed form of FB₁ was a minor species in extruded corn grits with or without added glucose, representing fumonisin analogues measured in this study. Research is needed to identify the reaction products resulting from extrusion processing of fumonisin-contaminated corn products. Twin-screw extrusion is widely used in food industry for its versatility. This technology may reduce the level of fumonisins in corn particularly with added glucose. Journal of Food Science © 2011 Institute of Food Technologists® No claim to original US government works.

  11. Coal in Asia-Pacific. Vol.9. No.1. Third APEC Coal Flow Seminar

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The Third APEC (Asia-Pacific Economic Cooperation) Coal Flow Seminar was held featuring regional investment strategies for coal, power infrastructure, and technology transfer in Terrigal, Australia in 26-28, November, 1996. This publication introduces the summary and the papers presented for the keynote speeches and the panels of this seminar. For the keynote speeches, `Investment requirements for steaming coal supplies in APEC member economies,` `Barriers to investment across the APEC regional coal chain,` `The role of advanced coal technologies in greenhouse gas abatement and financing its development and uptake,` `Investment in clean coal power plants,` and `Role of multilateral development banks in financing clean coal technologies to reduce greenhouse gas emission` were presented. In addition, summary and papers describing individual situations of APEC member economies are introduced. 59 refs., 42 figs., 37 tabs.

  12. Complex deformation routes for direct recycling aluminium alloy scrap via industrial hot extrusion

    Science.gov (United States)

    Paraskevas, Dimos; Kellens, Karel; Kampen, Carlos; Mohammadi, Amirahmad; Duflou, Joost R.

    2018-05-01

    This paper presents the final results of an industrial project, aiming for direct hot extrusion of wrought aluminium alloy scrap at an industrial scale. Two types of complex deformation/extrusion routes were tested for the production of the same profile, starting from AA6060 scrap in form of machining chips. More specifically scrap-based billets were extruded through: a 2-porthole and a 4-porthole die-set, modified for enhanced scrap consolidation and grain refinement. For comparison reasons, cast billets of the same alloy were extruded through the modified 2-porthole die set. The tensile testing results as well as microstructural investigations show that the 4-porthole extrusion route further improves scrap consolidation compared to the 2-porthole die output. The successful implementation of solid state recycling, directly at industrial level, indicates the technological readiness level of this research.

  13. Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion

    Energy Technology Data Exchange (ETDEWEB)

    Fan, X.H. [State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240 (China); School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240 (China); Tang, D., E-mail: tangding@sjtu.edu.cn [State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240 (China); School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240 (China); Fang, W.L.; Li, D.Y.; Peng, Y.H. [State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240 (China); School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240 (China)

    2016-08-15

    Aluminum multi-port extrusion tube is processed by the porthole die extrusion and the internal tube walls are welded through the solid state metallurgical bonding. In order to observe the development of grains and their orientations under severe plastic deformation and solid state welding, the extrusion butt together with the die is quenched immediately after extrusion to preserve the grain structure in the processing. The forming histories of selected material points are obtained by analyzing the optical microscopy graph. The evolution of the microstructure along the forming path is characterized by electro backscattered diffraction. It is found that geometrical dynamic recrystallization happens in the process. Grains are elongated, scattered at the transition zone and shear intensive zone, and then pinched off when they are pushed out from the die orifice. The shear-type orientations are predominant at the surface layer on the longitudinal section of the tube web and have penetrated into the intermediate layer. The rolling-type orientations are formed at the central layer. Texture gradient through the thickness of the tube web is observed. And cube orientated grains are found at the seam weld region. - Highlights: •Microstructure of extrusion butt is preserved after the micro scale porthole die extrusion. •Grain morphology history along forming path is investigated. •Texture evolutions on three material flows are present. •Texture gradient exists on the longitudinal section of the internal wall of profile. •Rolling-type and cube textures are found at the solid state welding region.

  14. Arbejdspapir til Thesis-seminar

    DEFF Research Database (Denmark)

    Damkjaer, Maja Sonne

    2014-01-01

    Arbejdspapir til Thesis-seminar afholdt ved Forskningsseminar i Forskningsprogrammet: Medier, Kommunikation og Samfund, Institut for Æstetik og Kommunikation, Aarhus Universitet. Afhandlingens teoretiske afsnit.......Arbejdspapir til Thesis-seminar afholdt ved Forskningsseminar i Forskningsprogrammet: Medier, Kommunikation og Samfund, Institut for Æstetik og Kommunikation, Aarhus Universitet. Afhandlingens teoretiske afsnit....

  15. RJH seminar

    International Nuclear Information System (INIS)

    2003-01-01

    This document gathers the slides that were presented at the Jules Horowitz reactor (RJH) seminar on the 14 january 2003. RJH seminars take place regularly in order to give an overview and make a point of the advancement of the RJH project. The contributions can be classed into 6 topics: 1) historical review of the RJH project, 2) RJH design and site studies, 3) irradiation devices, 4) development and qualification of codes to design RJH (Horus-3d, Sultan), 5) materials (aluminium alloys, mechanical resistance, corrosion and welding), and 6) UMo nuclear fuel (specifications, fabrication and reprocessing). (A.C.)

  16. Friction measurement and modelling in forward rod extrusion

    DEFF Research Database (Denmark)

    Tan, Xincai; Bay, Niels; Zhang, Wenqi

    2003-01-01

    Forward extrusion is one of the important processes in bulk metal forming. Friction stress can be estimated from the slope of the load±displacement curve at the steady state after the maximum load in a forward extrusion test. In this paper, forward rod extrusion tests are carried out to determine...... as the lubricant. Friction stresses are obtained from measurements of slopes of extrusion pressure±punch travel curves at the steady state stage. Normal pressures are evaluated by using Mohr’s circle, in which shear ¯ow stresses are estimated at the maximum elastic deformation points from the same extrusion...... pressure±punch travel curves. It is found that the relationship between normal pressure and friction stress appears linear, and therefore Coulomb’s friction model ®ts the experimental data very well. Extrusion pressure±punch travel curves before the steady state can be divided into four stages: elastic...

  17. 8. Seminar of the IMP-IIE-ININ on technological specialties. Topic 10: Earth Sciences; 8. Seminario IMP-IIE-ININ sobre especialidades tecnologicas. Mesa 10: Ciencias de la Tierra

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The document contains two papers within INIS subject scope which were presented at the 8th Seminar of the IMP-IIE-ININ on technological specialties. Topic 10: Earth Sciences. A separate abstract was prepared for each paper.

  18. Theses of XX International Seminar on charged particle accelerators

    International Nuclear Information System (INIS)

    Papkovich, V.G.; Rakivnenko, L.M.

    2007-01-01

    Published abstracts of reports of the XX International Seminar on charged particle accelerators have interest for specialists in the fields of linear accelerator physics and technology, VHF uses systems of beam diagnostics and autometed control, new acceleration methods and for theses who use electrophysical devices in industry, medicine and research

  19. 30. MPA-Seminar 'Safety and reliability in energy technology' in conjunction with the 9th German-Japanese seminar. Vol. 1 (Papers 1-26); 30. MPA-Seminar 'Sicherheit und Verfuegbarkeit in der Energietechnik' in Verbindung mit dem 9. Deutsch-Japanischen Seminar. Bd. 1 (Vortraege 1-26)

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E. (comp.)

    2004-07-01

    The 30th MPA-seminar on ''Safety and Availability in Energy Engineering'' was held in conjuction with the 9th German-Japanese Seminar. The 52 contributions were published in two volumes. Volume 1 contains the contributions to the following sessions: fracture mechanics, fatigue, welding, environmental impact and European research projects. Volume 2 contains contributions of sessions 6-9: high-temperature application, modelling-simulation, ageing management and non-destructive testing. (uke)

  20. 30. MPA-Seminar 'Safety and reliability in energy technology' in conjunction with the 9th German-Japanese seminar. Vol. 2 (Papers 27-53); 30. MPA-Seminar 'Sicherheit und Verfuegbarkeit in der Energietechnik' in Verbindung mit dem 9. Deutsch-Japanischen Seminar. Bd. 2 (Vortraege 27-53)

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E. (comp.)

    2004-07-01

    he 30th MPA-seminar on ''Safety and Availability in Energy Engineering'' was held in conjuction with the 9th German-Japanese Seminar. The 52 contributions were published in two volumes. Volume 1 contains the contributions to the following sessions: fracture mechanics, fatigue, welding, environmental impact and European research projects. Volume 2 contains contributions of sessions 6-9: high-temperature application, modelling-simulation, ageing management and non-destructive testing. (uke)

  1. Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation.

    Science.gov (United States)

    Patil, Hemlata; Tiwari, Roshan V; Repka, Michael A

    2016-02-01

    Hot-melt extrusion (HME) is a promising technology for the production of new chemical entities in the developmental pipeline and for improving products already on the market. In drug discovery and development, industry estimates that more than 50% of active pharmaceutical ingredients currently used belong to the biopharmaceutical classification system II (BCS class II), which are characterized as poorly water-soluble compounds and result in formulations with low bioavailability. Therefore, there is a critical need for the pharmaceutical industry to develop formulations that will enhance the solubility and ultimately the bioavailability of these compounds. HME technology also offers an opportunity to earn intellectual property, which is evident from an increasing number of patents and publications that have included it as a novel pharmaceutical formulation technology over the past decades. This review had a threefold objective. First, it sought to provide an overview of HME principles and present detailed engineered extrusion equipment designs. Second, it included a number of published reports on the application of HME techniques that covered the fields of solid dispersions, microencapsulation, taste masking, targeted drug delivery systems, sustained release, films, nanotechnology, floating drug delivery systems, implants, and continuous manufacturing using the wet granulation process. Lastly, this review discussed the importance of using the quality by design approach in drug development, evaluated the process analytical technology used in pharmaceutical HME monitoring and control, discussed techniques used in HME, and emphasized the potential for monitoring and controlling hot-melt technology.

  2. Evaluation of Extrusion Technique for Nanosizing Liposomes

    Directory of Open Access Journals (Sweden)

    Sandy Gim Ming Ong

    2016-12-01

    Full Text Available The aim of the present study was to study the efficiency of different techniques used for nanosizing liposomes. Further, the aim was also to evaluate the effect of process parameters of extrusion techniques used for nanosizing liposomes on the size and size distribution of the resultant liposomes. To compare the efficiency of different nanosizing techniques, the following techniques were used to nanosize the liposomes: extrusion, ultrasonication, freeze-thaw sonication (FTS, sonication and homogenization. The extrusion technique was found to be the most efficient, followed by FTS, ultrasonication, sonication and homogenization. The extruder used in the present study was fabricated using readily available and relatively inexpensive apparatus. Process parameters were varied in extrusion technique to study their effect on the size and size distribution of extruded liposomes. The results obtained indicated that increase in the flow rate of the extrusion process decreased the size of extruded liposomes however the size homogeneity was negatively impacted. Furthermore, the liposome size and distribution was found to decline with decreasing membrane pore size. It was found that by extruding through a filter with a pore size of 0.2 µm and above, the liposomes produced were smaller than the pore size, whereas, when they were extruded through a filter with a pore size of less than 0.2 µm the resultant liposomes were slightly bigger than the nominal pore size. Besides that, increment of extrusion temperature above transition temperature of the pro-liposome had no effect on the size and size distribution of the extruded liposomes. In conclusion, the extrusion technique was reproducible and effective among all the methods evaluated. Furthermore, processing parameters used in extrusion technique would affect the size and size distribution of liposomes. Therefore, the process parameters need to be optimized to obtain a desirable size range and homogeneity

  3. Continuous production of fenofibrate solid lipid nanoparticles by hot-melt extrusion technology: a systematic study based on a quality by design approach.

    Science.gov (United States)

    Patil, Hemlata; Feng, Xin; Ye, Xingyou; Majumdar, Soumyajit; Repka, Michael A

    2015-01-01

    This contribution describes a continuous process for the production of solid lipid nanoparticles (SLN) as drug-carrier systems via hot-melt extrusion (HME). Presently, HME technology has not been used for the manufacturing of SLN. Generally, SLN are prepared as a batch process, which is time consuming and may result in variability of end-product quality attributes. In this study, using Quality by Design (QbD) principles, we were able to achieve continuous production of SLN by combining two processes: HME technology for melt-emulsification and high-pressure homogenization (HPH) for size reduction. Fenofibrate (FBT), a poorly water-soluble model drug, was incorporated into SLN using HME-HPH methods. The developed novel platform demonstrated better process control and size reduction compared to the conventional process of hot homogenization (batch process). Varying the process parameters enabled the production of SLN below 200 nm. The dissolution profile of the FBT SLN prepared by the novel HME-HPH method was faster than that of the crude FBT and a micronized marketed FBT formulation. At the end of a 5-h in vitro dissolution study, a SLN formulation released 92-93% of drug, whereas drug release was approximately 65 and 45% for the marketed micronized formulation and crude drug, respectively. Also, pharmacokinetic study results demonstrated a statistical increase in Cmax, Tmax, and AUC0-24 h in the rate of drug absorption from SLN formulations as compared to the crude drug and marketed micronized formulation. In summary, the present study demonstrated the potential use of hot-melt extrusion technology for continuous and large-scale production of SLN.

  4. Wind Turbine Tribology Seminar - A Recap

    Energy Technology Data Exchange (ETDEWEB)

    Errichello, R.; Sheng, S.; Keller, J.; Greco, A.

    2012-02-01

    Tribology is the science and engineering of interacting surfaces in relative motion. It includes the study and application of the principles of friction, lubrication, and wear. It is an important phenomenon that not only impacts the design and operation of wind turbine gearboxes, but also their subsequent maintenance requirements and overall reliability. With the major growth and increasing dependency on renewable energy, mechanical reliability is an extremely important issue. The Wind Turbine Tribology Seminar was convened to explore the state-of-the-art in wind turbine tribology and lubricant technologies, raise industry awareness of a very complex topic, present the science behind each technology, and identify possible R&D areas. To understand the background of work that had already been accomplished, and to consolidate some level of collective understanding of tribology by acknowledged experts, the National Renewable Energy Laboratory (NREL), Argonne National Laboratory (ANL), and the U.S. Department of Energy (DOE) hosted a wind turbine tribology seminar. It was held at the Renaissance Boulder Flatiron Hotel in Broomfield, Colorado on November 15-17, 2011. This report is a summary of the content and conclusions. The presentations given at the meeting can be downloaded. Interested readers who were not at the meeting may wish to consult the detailed publications listed in the bibliography section, obtain the cited articles in the public domain, or contact the authors directly.

  5. Theses of XIX International Seminar on charged particle accelerators

    International Nuclear Information System (INIS)

    Anon

    2005-01-01

    Published abstracts of reports of the XIX International Seminar on charged particle accelerators have interest for specialists in the fields of linear accelerator physics and technology, VHF uses, systems of beam diagnostics and automated control, new acceleration methods, as well as for theses who use electrophysical devices in industry, medicine and research

  6. Applied Mathematics Seminar 1982

    International Nuclear Information System (INIS)

    1983-01-01

    This report contains the abstracts of the lectures delivered at 1982 Applied Mathematics Seminar of the DPD/LCC/CNPq and Colloquy on Applied Mathematics of LCC/CNPq. The Seminar comprised 36 conferences. Among these, 30 were presented by researchers associated to brazilian institutions, 9 of them to the LCC/CNPq, and the other 6 were given by visiting lecturers according to the following distribution: 4 from the USA, 1 from England and 1 from Venezuela. The 1981 Applied Mathematics Seminar was organized by Leon R. Sinay and Nelson do Valle Silva. The Colloquy on Applied Mathematics was held from october 1982 on, being organized by Ricardo S. Kubrusly and Leon R. Sinay. (Author) [pt

  7. 7. Seminar of the IIE-ININ-IMP on technological specialties. Topic 10: Information Services; 7. Seminario IIE-ININ-IMP sobre especialidades tecnologicas. Mesa 10. Servicios de informacion.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The document includes 10 papers presented at the 7. Seminar of the IIE-IMP-ININ (Mexico) on technological specialities in the field of information services (Topic 10). Three items were in INIS subject scope and a separate abstract was prepared for each of them.

  8. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or contact the organiser.

  9. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide VITÈ

    2002-01-01

    Wednesday 6 March   from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or con...

  10. Aluminum extrusion with a deformable die

    NARCIS (Netherlands)

    Assaad, W.

    2010-01-01

    Aluminum extrusion process is one of metal forming processes. In aluminum extrusion, a work-piece (billet) is pressed through a die with an opening that closely resembles a desired shape of a profile. By this process, long profiles with an enormous variety of cross-sections can be produced to

  11. CS Seminar Videos

    OpenAIRE

    Ong, Derek; Tona, Glen; Gibb, Kyle; Parbadia, Sivani

    2013-01-01

    Main site for our project can be found at this URL: http://vtechworks.lib.vt.edu/handle/10919/19036. From here you can find videos of all the CS seminars and distinguished lectures given this semester. Each video has its own abstract and description. The files attached in this section are a final report in both raw Word Document and archival PDF formats and a presentation in both raw Powerpoint and archival PDF formats. Computer Science seminars are a very educational and interesting as...

  12. Fiscal 2000 international energy use rationalization measures project. International energy consumption efficiency improvement technology diffusion project - Green helmet project (Thailand: Report on heating furnace energy conservation seminar); 2000 nendo. Kokusai energy shiyo gorika to taisaku jigyo, Kokusai energy shohi koritsuka to gijutsu fukyu jigyo, Green helmet jigyo (Thai : kanetsuro shoenergy seminar hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The above-named seminar was held in Bangkok, Thailand, on January 30, 2001, and covered three kinds of industries of ceramics, glass, and aluminum. Approximately 200 people attended the meeting, consisting of NEDO (New Energy and Industrial Technology Development Organization)-affiliated people and 16 lecturers from Japan, and Thai participants. The seminar comprised a 'keynote address' and 'lectures on engineering' that aimed at the three industries as a whole, and 'lectures on engineering' and 'cases and activities for energy conservation' that aimed, respectively, at the three industries. Lectures were delivered on operating technologies which were already in practical use and on state-of-the-art technologies. The keynote address, entitled 'Global warming prevention and industrial furnaces,' covered the results of the 'High-performance industrial furnace field test project.' The lectures on engineering dealt with the 'instrumentation control system' and 'heat insulation technology' which were basic technologies for energy conservation and 'diagnosis technology and practice' which aimed at the enhancement of energy conservation after the start of operation. Questions and answers were earnestly exchanged. (NEDO)

  13. Proceedings of the seminar on leak before break in reactor piping and vessels

    International Nuclear Information System (INIS)

    Faidy, C.; Gilles, P.

    1997-04-01

    The objective of the seminar was to present the current state of the art in Leak-Before-Break (LBB) methodology development, validation, and application in an international forum. With particular emphasis on industrial applications and regulatory policies, the seminar provided an opportunity to compare approaches, experiences, and codifications developed by different countries. The seminar was organized into four topic areas: status of LBB applications; technical issues in LBB methodology; complementary requirements (leak detection and inspection); LBB assessment and margins. As a result of this seminar, an improved understanding of LBB gained through sharing of different viewpoints from different countries, permits consideration of: simplified pipe support design and possible elimination of loss-of-coolant-accident (LOCA) mechanical consequences for specific cases; defense-in-depth type of applications without support modifications; support of safety cases for plants designed without the LOCA hypothesis. In support of these activities, better estimates of the limits to the LBB approach should follow, as well as an improvement in codifying methodologies. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

  14. Proceedings of the seminar on leak before break in reactor piping and vessels

    Energy Technology Data Exchange (ETDEWEB)

    Faidy, C. [ed.] [Electricite de France, Villeurbanne (France); Gilles, P. [ed.] [Framatome, Paris (France)

    1997-04-01

    The objective of the seminar was to present the current state of the art in Leak-Before-Break (LBB) methodology development, validation, and application in an international forum. With particular emphasis on industrial applications and regulatory policies, the seminar provided an opportunity to compare approaches, experiences, and codifications developed by different countries. The seminar was organized into four topic areas: status of LBB applications; technical issues in LBB methodology; complementary requirements (leak detection and inspection); LBB assessment and margins. As a result of this seminar, an improved understanding of LBB gained through sharing of different viewpoints from different countries, permits consideration of: simplified pipe support design and possible elimination of loss-of-coolant-accident (LOCA) mechanical consequences for specific cases; defense-in-depth type of applications without support modifications; support of safety cases for plants designed without the LOCA hypothesis. In support of these activities, better estimates of the limits to the LBB approach should follow, as well as an improvement in codifying methodologies. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  15. Proceedings of the national seminar and awareness programme on applications of radioisotopes and radiation technology in industry and health care

    International Nuclear Information System (INIS)

    Durairaj, S.; Madan, V. K.

    2012-01-01

    The National Seminar and Awareness Program on Applications of Radioisotopes and Radiation Technology in Industry and Health care is an important national event to learn about the challenges in the development and proliferation of application of radioisotopes and radiation technologies, and in appreciation of the role of these technologies to the benefit of public at large. This program endeavors to disseminate knowledge about lesser known and widely applied technologies and send the right message to the people for their greater acceptance. Applications of radioisotopes and radiation technology in industry such as oil, gas, chemical, petrochemical, steel, mining, paper, mineral and automobile and health care such as non-invasive diagnosis and treatment of a range of important and common conditions like cancer and cardiovascular diseases and radiation processed polymer containing hydrogel for use for bum dressing, and medical and agricultural products sterilization, have seen a significant growth in our country in the last fifty years. The indigenous capacity for the development and utilization of these technologies must be further strengthened. Papers relevant to INIS are indexed separately

  16. Extrusion product defects: a statistical study

    International Nuclear Information System (INIS)

    Qamar, S.Z.; Arif, A.F.M.; Sheikh, A.K.

    2003-01-01

    In any manufacturing environment, defects resulting in rework or rejection are directly related to product cost and quality, and indirectly linked with process, tooling and product design. An analysis of product defects is therefore integral to any attempt at improving productivity, efficiency and quality. Commercial aluminum extrusion is generally a hot working process and consists of a series of different but integrated operations: billet preheating and sizing, die set and container preheating, billet loading and deformation, product sizing and stretching/roll-correction, age hardening, and painting/anodizing. Product defects can be traced back to problems in billet material and preparation, die and die set design and maintenance, process variable aberrations (ram speed, extrusion pressure, container temperature, etc), and post-extrusion treatment (age hardening, painting/anodizing, etc). The current paper attempts to analyze statistically the product defects commonly encountered in a commercial hot aluminum extrusion setup. Real-world rejection data, covering a period of nine years, has been researched and collected from a local structural aluminum extrusion facility. Rejection probabilities have been calculated for all the defects studied. The nine-year rejection data have been statistically analyzed on the basis of (i) an overall breakdown of defects, (ii) year-wise rejection behavior, (iii) breakdown of defects in each of three cost centers: press, anodizing, and painting. (author)

  17. Clean Coal Day '94 Hokkaido International Seminar; Clean coal day '94 Hokkaido kokusai seminar

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-01

    The lectures given at the seminar were 1) Coal energy be friendly toward the earth, 2) Clean coal technology in the United Kingdom, and 3) How clean coal should be in Australia. In lecture 1), remarks are made on the importance of coal and its future, coal that protects forest, whether coal is a dirty fuel, coal combustion tests started relative to environmental pollution, acid rain in China and coal combustion, briquets effective in energy conservation, etc. In lecture 2), remarks are made on the importance of coal utilization in the United Kingdom, current state of coal utilization in power generation, problems related to gasification furnaces, problems related to combustors, problems related to high-temperature gas cleaning, function of cleaning filters, advantages of high-temperature gas treatment, actualities of gas combustors, studies of gas combustors, etc. In lecture 3), remarks are made on Australia's coal situation, problems related to clean coal technology, problems related to coal preparation technology, potentialities of Australian brown coal, coal utilization in power generation, need of new technology development, current state of coal utilization in Australia, coal utilization in metal-making industry, international cooperation on technology, etc. (NEDO)

  18. 25. MPA-seminar: safety and reliability of plant technology with special emphasis on safety and reliability - integrity proofs, qualification of components, damage prevention. Vol. 1. Papers 1-29

    International Nuclear Information System (INIS)

    1999-01-01

    The proceedings of the 25th MPA Seminar on 'Safety and Reliability of Plant Technology' were issued in two volumes. The main topics of the first volume are: 1. Structural and safety analysis, 2. Reliability analysis, 3. Fracture mechanics, and 4. Nondestructive Testing. s

  19. Fate of Fusarium mycotoxins in maize flour and grits during extrusion cooking.

    Science.gov (United States)

    Scudamore, Keith A; Guy, Robin C E; Kelleher, Brian; MacDonald, Susan J

    2008-11-01

    Extrusion technology is used widely in the manufacture of a range of breakfast cereals and snacks for human consumption and animal feeds. To minimise consumer exposure to mycotoxins, the levels of deoxynivalenol (DON) and zearalenone (ZON) in cereals/cereal products and fumonisins B(1) and B(2) (FB(1) and FB(2)) in maize are controlled by European Union legislation. Relatively few studies, however, have examined the loss of Fusarium mycotoxins during processing. The behaviour of FB(1), FB(2) and fumonisin B(3) (FB(3)), DON and ZON during extrusion of naturally contaminated maize flour and maize grits is examined using pilot-scale equipment. DON and ZON are relatively stable during extrusion cooking but the fumonisins are lost to varying degrees. There is some loss of ZON when present in low concentrations and extruded at higher moisture contents. The presence of additives, such as reducing sugars and sodium chloride, can also affect mycotoxin levels. Moisture content of the cereal feed during extrusion is important and has a greater effect than temperature, particularly on the loss of fumonisins at the lower moistures. The effects are complex and not easy to explain, although more energy input to the extruder is required for drier materials. However, on the basis of these studies, the relationship between the concentration of Fusarium toxins in the raw and finished product is toxin- and process-dependent.

  20. Search as Learning (Dagstuhl Seminar 17092)

    OpenAIRE

    Collins-Thompson, Kevyn; Hansen, Preben; Hauff, Claudia

    2017-01-01

    This report describes the program and the results of Dagstuhl Seminar 17092 "Search as Learning", which brought together 26 researchers from diverse research backgrounds. The motivation for the seminar stems from the fact that modern Web search engines are largely engineered and optimized to fulfill lookup tasks instead of complex search tasks. The latter though are an essential component of information discovery and learning. The 3-day seminar started with four perspective talks, providing f...

  1. Parenting Seminars for Divorcing Parents.

    Science.gov (United States)

    Frieman, Barry B.

    1995-01-01

    Profiles the parenting seminars and counseling services for divorcing parents offered by the Children of Separation and Divorce Center, a community service agency in Maryland. The seminars are designed to help parents adjust to divorce and understand the needs of their children during and after the divorce process. (MDM)

  2. Zr Extrusion – Direct Input for Models & Validation

    Energy Technology Data Exchange (ETDEWEB)

    Cerreta, Ellen Kathleen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-07

    As we examine differences in the high strain rate, high strain tensile response of high purity, highly textured Zr as a function of loading direction, temperature and extrusion velocity with primarily post mortem characterization techniques, we have also developed a technique for characterizing the in-situ extrusion process. This particular measurement is useful for partitioning energy of the system during the extrusion process: friction, kinetic energy, and temperature

  3. Graphite and PMMA as pore formers for thermoplastic extrusion of porous 3Y-TZP oxygen transport membrane supports

    DEFF Research Database (Denmark)

    Bjørnetun Haugen, Astri; Gurauskis, Jonas; Kaiser, Andreas

    2016-01-01

    A gas permeable porous support is a crucial part of an asymmetric oxygen transport membrane (OTM). Here, we develop feedstocks for thermoplastic extrusion of tubular, porous 3Y-TZP (partially stabilized zirconia polycrystals, (Y2O3)0.03(ZrO2)0.97)) ceramics, using graphite and/or polymethyl....... This demonstrates the suitability of thermoplastic extrusion for fabrication of porous 3Y-TZP OTM supports, or for other technologies requiring porous ceramics....

  4. Technical training seminar: Data Converters and Linear Products for Signal Processing and Control

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Monday 23 January 2006 TECHNICAL TRAINING SEMINAR from 14:00 to 17:30, Training Centre Auditorium (bldg. 503) Data Converters and Linear Products for Signal Processing and Control Marco Corsi, William Bright, Olrik Maier, Andrea Huder / TEXAS INSTRUMENTS (US, D, CH) Texas Instruments will present recent technology advances in design and manufacturing of A/D and D/A converters, and of operational amplifiers. 14:00 - 15:30 HIGH SPEED - Technology and the new process BiCom3: High speed ADCs, DACs, operational amplifiers 15:30 - 15:45 coffee 15:45 - 17:15 HIGH PRECISION - Technology and the new process HPA07: High precision ADCs, DACs, operational amplifiers questions, discussion Industrial partners: Robert Medioni, François Caloz Spoerle Electronic, CH-1440 Montagny (VD), Switzerland Phone: + 41 24 447 01 37, email: RMedioni@spoerle.com, http://www.spoerle.com Language: English. Free seminar (no registration). Organiser: Davide Vitè / HR-PMD-ATT / 75141 For more information, visit the Te...

  5. Seminar proceedings. Seminar on piping reliability

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The international seminar brought together the disciplines of probabilistic safety assessment and probabilistic fracture mechanics. The work performed by the joint Nordic Nuclear Safety Research Project NKS/RAK 1.2 and the SLAP project was presented the first day. The second was mainly devoted to the integration of the two disciplines. 11 contributions have been separately indexed.

  6. Seminar proceedings. Seminar on piping reliability

    International Nuclear Information System (INIS)

    1997-10-01

    The international seminar brought together the disciplines of probabilistic safety assessment and probabilistic fracture mechanics. The work performed by the joint Nordic Nuclear Safety Research Project NKS/RAK 1.2 and the SLAP project was presented the first day. The second was mainly devoted to the integration of the two disciplines. 11 contributions have been separately indexed

  7. Extrusão de misturas de castanha do Brasil com mandioca Extrusion of Brazil nut and cassava flour mixtures

    Directory of Open Access Journals (Sweden)

    Maria Luzenira de Souza

    2008-06-01

    potential, low consumption in Brazil, low added-value and is an organic product; that cassava has high productivity and low cost; and that the technology of thermoplastic extrusion presents wide applicability and considerable advantages, the objective of this work was to use these three variables, formulating Brazil nut and cassava flour mixtures and processing them by extrusion, with the aim of obtaining ready-to-eat extruded products containing high levels of vegetable protein. Semi-defatted Brazil nut cake and cassava flour were used to formulate the mixtures for extrusion. A complete factorial central composite design (2³ with 3 independent variables, and the response surface methodology were used to evaluate the results of the proximate composition and caloric value, according to the variations in the quantity of nut, moisture content and temperature. The results indicate that the mixtures with higher Brazil nut levels present higher levels of protein, fat and ash, while the mixtures with less Brazil nut present higher levels of carbohydrate. The average regression coefficients of the statistical model for the responses are: moisture 7.40; carbohydrate 51.09; protein 15.34; fat 11.77; total fibre 9.92 and kcal 371.65. The trials with lower quantities of Brazil nut and higher quantities of flour are more expanded and of a lighter colour, while those with more Brazil nut do not expand and are greyish in colour. It is concluded that the addition of Brazil nut to cassava flour results in a mixture that could be submitted to extrusion, producing an extruded product that could serve as a ready-to-eat source of vegetable protein, and attend the demands of consumers who do not consume proteins of animal origin.

  8. Residence time modeling of hot melt extrusion processes.

    Science.gov (United States)

    Reitz, Elena; Podhaisky, Helmut; Ely, David; Thommes, Markus

    2013-11-01

    The hot melt extrusion process is a widespread technique to mix viscous melts. The residence time of material in the process frequently determines the product properties. An experimental setup and a corresponding mathematical model were developed to evaluate residence time and residence time distribution in twin screw extrusion processes. The extrusion process was modeled as the convolution of a mass transport process described by a Gaussian probability function, and a mixing process represented by an exponential function. The residence time of the extrusion process was determined by introducing a tracer at the extruder inlet and measuring the tracer concentration at the die. These concentrations were fitted to the residence time model, and an adequate correlation was found. Different parameters were derived to characterize the extrusion process including the dead time, the apparent mixing volume, and a transport related axial mixing. A 2(3) design of experiments was performed to evaluate the effect of powder feed rate, screw speed, and melt viscosity of the material on the residence time. All three parameters affect the residence time of material in the extruder. In conclusion, a residence time model was developed to interpret experimental data and to get insights into the hot melt extrusion process. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. Nuclear power technologies. Abstracts of reports

    International Nuclear Information System (INIS)

    Koltysheva, G.I.; Mukusheva, M.K.; Perepelkin, I.G.

    2000-01-01

    In May 14-17, 2000, and on the initiative of the Ministry of Science and High Education of the Republic of Kazakstan with cooperation of Department of Energy US, International Seminar on Nuclear Power Technologies was held in Astana, Kazakhstan. More than 70 reports of scientists from different countries (USA, Russia, Japan and Kazakhstan) were presented during the Seminar. Representatives from different international organizations (European Commission Delegation, IAEA), from organizations of Kazakstan, Russia, USA, Japan took part in the Seminar. In all at the Seminar there were more then 100 participants. The Seminar included Plenary Session, two sections: 1) Nuclear Safety and Nuclear Technologies; 2) Material Investigations for Nuclear and Thermonuclear Power; Workshop: Nuclear Facilities Decommissioning and Decontamination; and Posters

  10. Creating the Sustainable City: Building a Seminar (and Curriculum) through Interdisciplinary Learning

    Science.gov (United States)

    Bryson, Michael A.; Zimring, Carl A.

    2010-01-01

    Using the wealth of sites available in the Chicago metropolitan area, online learning technologies, and classroom interactions, Roosevelt University's seminar "The Sustainable City" takes a multidisciplinary approach to urban ecology, waste management, green design, climate change, urban planning, parklands, water systems, environmental…

  11. Increasing Effectiveness of Strategic Planning Seminars through Learning Style

    Science.gov (United States)

    Yildirim, Nail

    2010-01-01

    This research tests the effectiveness of taking learning style variables from the Kolb learning model in designing strategic planning seminars. We observe in our research that the participants in the seminar--school principals--positively judge the effectiveness of the seminar. The research also tests the seminar's effectiveness in terms of the…

  12. INIS/AGRIS training seminar

    International Nuclear Information System (INIS)

    1976-01-01

    The second joint INIS/AGRIS Training Seminar for the two essentially compatible information systems, INIS (International Nuclear Information System) and AGRIS (International System for the Agricultural Sciences and Technology), was held in Vienna, the first having taken place a year ago in Ankara. This year saw an expansion in the number of courses offered, which increased from nine to a total of 16. Additional courses in input preparation, and output utilization were offered, and improved retrieval facilities were available. Two joint courses for INIS and AGRIS magnetic tape users were given. With an increasing number of countries preparing input in machine-readable form, and with increasing utilization of magnetic tape output products, a forum for tape users was a logical addition at this time. Five courses were given in abstracting. INIS ATOMINDEX became the only international abstracting journal in the nuclear sciences with the cessation of Nuclear Science Abstracts at the end of June 1976, when INIS assumed responsibility for the inclusion of good abstracts. The significance of abstract quality and INIS specifications in terms of machine-readable format and characters, length and language were considered in specific courses. The courses on abstracting consisted of basic instruction on general principles, followed by abstracting in the areas of physics, chemistry, engineering and reactor technology, and the life sciences, where aspects specific to the particular field were emphasized. Participants were given an opportunity to attend demonstrations of the optical character recognition equipment and related hardware in use at the IAEA. Five computer terminals were placed at the disposal of seminar participants, thus permitting interactive retrieval of documents in on-line dialogue. An adaptation of STAIRS (STorage And Information Retrieval System by IBM) was used. An INIS test data-base of 60 000 documents and AGRIS test data-base of 80 000 documents were

  13. Design of conveyor type machine with numerical control for manufacturing of extrusion thermoplastic thread

    Science.gov (United States)

    Gorbunova, T. N.; Koltunov, I. I.; Tumanova, M. B.

    2018-05-01

    The article is devoted to the development of a model and control program for a 3D printer working based on extrusion technology. The article contains descriptions of all components of the machine and blocks of the interface of the control program.

  14. Material testing of copper by extrusion-cutting

    DEFF Research Database (Denmark)

    Segalina, F.; De Chiffre, Leonardo

    2017-01-01

    was developed and implemented on a CNC lathe. An investigation was carried out extrusion-cutting copper discs using high-speed-steel cutting tools at 100 m/min cutting speed. Flow stress values for copper under machining-relevant conditions were obtained from measurement of the extrusion-cutting force...

  15. Freshman Seminars: Interdisciplinary Engagements in Astronomy

    Science.gov (United States)

    Hemenway, M. K.

    2006-08-01

    The Freshman Seminar program at the University of Texas is designed to allow groups of fifteen students an engaging introduction to the University. The seminars introduce students to the resources of the university and allow them to identify interesting subjects for further research or future careers. An emphasis on oral and written communication by the students provides these first-year students a transition to college-level writing and thinking. Seminar activities include field trips to an art museum, a research library, and the Humanities Research Center rare book collection. This paper will report on two seminars, each fifteen weeks in length. In "The Galileo Scandal" students examine Galileo's struggle with the church (including a mock trial). They perform activities that connect his use of the telescope and observations to astronomical concepts. In "Astronomy and the Humanities" students analyze various forms of human expression that have astronomical connections (art, drama, literature, music, poetry, and science fiction); they perform hands-on activities to reinforce the related astronomy concepts. Evaluation of the seminars indicates student engagement and improvement in communication skills. Many of the activities could be used independently to engage students enrolled in standard introductory astronomy classes.

  16. Rapid production of hollow SS316 profiles by extrusion based additive manufacturing

    Science.gov (United States)

    Rane, Kedarnath; Cataldo, Salvatore; Parenti, Paolo; Sbaglia, Luca; Mussi, Valerio; Annoni, Massimiliano; Giberti, Hermes; Strano, Matteo

    2018-05-01

    Complex shaped stainless steel tubes are often required for special purpose biomedical equipment. Nevertheless, traditional manufacturing technologies, such as extrusion, lack the ability to compete in a market of customized complex components because of associated expenses towards tooling and extrusion presses. To rapid manufacture few of such components with low cost and high precision, a new Extrusion based Additive Manufacturing (EAM) process, is proposed in this paper, and as an example, short stainless steel 316L complex shaped and sectioned tubes were prepared by EAM. Several sample parts were produced using this process; the dimensional stability, surface roughness and chemical composition of sintered samples were investigated to prove process competence. The results indicate that feedstock with a 316L particle content of 92.5 wt. % can be prepared with a sigma blade mixing, whose rheological behavior is fit for EAM. The green samples have sufficient strength to handle them for subsequent treatments. The sintered samples considerably shrunk to designed dimensions and have a homogeneous microstructure to impart mechanical strength. Whereas, maintaining comparable dimensional accuracy and chemical composition which are required for biomedical equipment still need iterations, a kinematic correction and modification in debinding cycle was proposed.

  17. Pre-set extrusion bioprinting for multiscale heterogeneous tissue structure fabrication.

    Science.gov (United States)

    Kang, Donggu; Ahn, Geunseon; Kim, Donghwan; Kang, Hyun-Wook; Yun, Seokhwan; Yun, Won-Soo; Shim, Jin-Hyung; Jin, Songwan

    2018-06-06

    Recent advances in three-dimensional bioprinting technology have led to various attempts in fabricating human tissue-like structures. However, current bioprinting technologies have limitations for creating native tissue-like structures. To resolve these issues, we developed a new pre-set extrusion bioprinting technique that can create heterogeneous, multicellular, and multimaterial structures simultaneously. The key to this ability lies in the use of a precursor cartridge that can stably preserve a multimaterial with a pre-defined configuration that can be simply embedded in a syringe-based printer head. The multimaterial can be printed and miniaturized through a micro-nozzle without conspicuous deformation according to the pre-defined configuration of the precursor cartridge. Using this system, we fabricated heterogeneous tissue-like structures such as spinal cords, hepatic lobule, blood vessels, and capillaries. We further obtained a heterogeneous patterned model that embeds HepG2 cells with endothelial cells in a hepatic lobule-like structure. In comparison with homogeneous and heterogeneous cell printing, the heterogeneous patterned model showed a well-organized hepatic lobule structure and higher enzyme activity of CYP3A4. Therefore, this pre-set extrusion bioprinting method could be widely used in the fabrication of a variety of artificial and functional tissues or organs.

  18. 3D FEM Geometry and Material Flow Optimization of Porthole-Die Extrusion

    International Nuclear Information System (INIS)

    Ceretti, Elisabetta; Mazzoni, Luca; Giardini, Claudio

    2007-01-01

    The aim of this work is to design and to improve the geometry of a porthole-die for the production of aluminum components by means of 3D FEM simulations. In fact, the use of finite element models will allow to investigate the effects of the die geometry (webs, extrusion cavity) on the material flow and on the stresses acting on the die so to reduce the die wear and to improve the tool life. The software used to perform the simulations was a commercial FEM code, Deform 3D. The technological data introduced in the FE model have been furnished by METRA S.p.A. Company, partner in this research. The results obtained have been considered valid and helpful by the Company for building a new optimized extrusion porthole-die

  19. Extrusion of the uranium-0.75 weight percent titanium alloy

    International Nuclear Information System (INIS)

    Jackson, R.J.; Lundberg, M.R.; Boland, J.F.

    1975-01-01

    Procedures are described for extruding the U--0.75 wt percent Ti alloy in the high alpha region (600 to 640 0 C) , and in the upper gamma region (900 to 1000 0 C). The casting of sound extrusion billets has importance in the production of sound extrusions, and procedures are given for casting sound billets up to 1,100 kilograms . Also important in producing sound extrusions is the use of glass lubricants. Reduction ratios of greater than 50 to 1 were achieved on reasonably sized billets. Extrusion constants of 48,000 pounds per square inch (psi) [296 megapascals (MPa)] for alpha phase (630 0 C) and 8,000 psi (56 MPa) for gamma phase (950 0 C) were achieved. Gamma-phase extrusion has preference over alpha-phase extrusion in that larger billets can be used and temperature control is not as critical. However alpha-phase extrusion offers better surface finish, less die wear, and fewer oxidation problems. Billets up to 14 inches in diameter have been successfully gamma-extruded and plans exist for extruding billets up to 20 inches (508 millimetres) in diameter. (U.S.)

  20. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2007-01-01

    The Department of Human Resources is organising a preparation for retirement seminar which will take place on the four successive afternoons of 2 to 5 October 2007. Similar seminars in the past have always proved highly successful. Retirement marks the end of one’s working life and the start of a new period of life. This period of transition and change is experienced differently from one individual to another. In any case, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above as well as those who have retired during the year have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned and the limited capacity of th...

  1. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2011-01-01

    The Human Resources Department is organizing a Preparation for Retirement Seminar, which will take place on 18 and 21 October 2011 in the afternoon in the Main Auditorium and on 19 October and 15 and 16 November 2011 in the afternoon in the Council Chamber. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned, you are ...

  2. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned and the limited capacity of the main auditorium, you are requested to register in advance via ...

  3. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place in the afternoons of 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance via Ind...

  4. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance ...

  5. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register ...

  6. Preparation for retirement seminar

    CERN Multimedia

    HR Department

      The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance via Indico. &a...

  7. Towards predictive control of extrusion weld seams: an integrated approach

    NARCIS (Netherlands)

    Bakker, A.J. den; Werkhoven, R.J.; Sillekens, W.H.; Katgerman, L.

    2010-01-01

    Longitudinal weld seams are an intrinsic feature in hollow extrusions produced with porthole dies. The formation of longitudinal weld seams is a solid bonding process, controlled by the local conditions in the extrusion die. Being the weakest areas within the extrusion cross section, it is desirable

  8. Proceedings of the 26. Arctic and Marine Oilspill Program (AMOP) Technical Seminar

    International Nuclear Information System (INIS)

    2003-01-01

    The papers presented at this Arctic and Marine Oilspill Program (AMOP) technical seminar reviewed the latest technologies that can be applied to the recovery and mitigation of marine oil spills. The very first seminar was held back in 1976 in response to public concerns regarding the potential for oil spills associated with offshore drilling in the Beaufort Sea in the Canadian Arctic. This twenty-sixth issue includes an appendix listing more than 1,200 AMOP papers from the first 25 years of the conference. Today, the AMOP conference has become international in nature and is the only surviving technical conference on oil spill science and technology in the world. While technical presentations about oil spills are the primary focus of the conference, many presentations also deal with other topics of interest, including contingency planning and legislation. In recent years, the conference has attracted about 200 people each year from 20 countries. The different sessions at this conference were entitled: (1) physical and chemical properties and behaviour of spilled oil, (2) activity updates and contingency planning, (3) detection, tracking and remote sensing, (4) biological effects of oil and hydrocarbons and oil biodegradation, (5) technical seminar on chemical spills with a special session on counter-terrorism, (6) technical seminar on chemical spills, (7) containment and recovery, (8) BIOSS, (9) in-situ burning and shoreline protection and cleanup, (10) oil spill treating agents, (11) spill modelling, and, (12) recent spill experiences. Several presentations described the process of oil in water interactions and were aimed at optimizing response functions, strategy development for marine oil spill response, equipment deployment, containment, recovery, and shoreline assessment. Several studies also presented new treatments for oil spills. Relevant papers and/or presentations were indexed separately for inclusion in the database

  9. Clean Coal Day '94 Hokkaido International Seminar; Clean coal day '94 Hokkaido kokusai seminar

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-01

    The lectures given at the seminar were 1) Coal energy be friendly toward the earth, 2) Clean coal technology in the United Kingdom, and 3) How clean coal should be in Australia. In lecture 1), remarks are made on the importance of coal and its future, coal that protects forest, whether coal is a dirty fuel, coal combustion tests started relative to environmental pollution, acid rain in China and coal combustion, briquets effective in energy conservation, etc. In lecture 2), remarks are made on the importance of coal utilization in the United Kingdom, current state of coal utilization in power generation, problems related to gasification furnaces, problems related to combustors, problems related to high-temperature gas cleaning, function of cleaning filters, advantages of high-temperature gas treatment, actualities of gas combustors, studies of gas combustors, etc. In lecture 3), remarks are made on Australia's coal situation, problems related to clean coal technology, problems related to coal preparation technology, potentialities of Australian brown coal, coal utilization in power generation, need of new technology development, current state of coal utilization in Australia, coal utilization in metal-making industry, international cooperation on technology, etc. (NEDO)

  10. Impressions from the 3rd Nordcode Seminar & Workshop

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Boelskifte, Per; Hansen, Claus Thorp

    2005-01-01

    This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar.......This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar....

  11. Report and analysis of S-cube. Super science seminar

    International Nuclear Information System (INIS)

    Isogai, Kentaro; Yasuhara, Yuko

    2004-04-01

    At the ITBL Promotion Office, the science seminar (S-cube: Super Science Seminar) which was held for the first time on Wed., October 30, 2002 has been held more than 50 times. Lectures have been invited from many universities and research organizations. Seminars have been held which are of interest to junior high school students and high school students. In this article, in addition to introducing the seminars that have been held, attention is paid to the theme of the seminars, and what management considerations are necessary in order to increase participants in the future. (author)

  12. Reviving Graduate Seminar Series through Non-Technical Presentations

    Science.gov (United States)

    Madihally, Sundararajan V.

    2011-01-01

    Most chemical engineering programs that offer M.S. and Ph.D. degrees have a common seminar series for all the graduate students. Many would agree that seminars lack student interest, leading to ineffectiveness. We questioned the possibility of adding value to the seminar series by incorporating non-technical topics that may be more important to…

  13. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 22 May From 14:00 to 17:00 - Training Centre Auditorium - bldg. 593, room 11 Reliability, Availability, Maintainability and Safety (RAMS) Philippe Galley, Vincent Brindejonc / LIGERON S.A., Saint Aubin, France This seminar will address Reliability, Availability, Maintainability and Safety (RAMS) engineering concepts to guarantee availability and safety of critical equipments, in particular in a high technology and R&D environment. Applications of these concepts will be presented. 14h00-14h30 Introduction to Reliability, Availability, Maintainability and Safety activities: general introduction to RAMS, basic definitions, integration of RAMS in a large project. 14h40-16h10 RAMS methodologies: Functional Analysis methodologies Preliminary Hazard Analysis Failure Mode Effects and Criticality Analysis (FMECA) Fault Tree Analysis Use of standards for Reliability predictions Reliability Block Diagrams for a system Advanced models, e.g. Markov's Graphs 16h30-17h00 Presentation of the activ...

  14. Advanced energy sources and conversion techniques. Proceedings of a seminar. Volume 1. [35 papers

    Energy Technology Data Exchange (ETDEWEB)

    None

    1958-11-01

    The Seminar was organized as a series of tutorial presentations and round table discussions on a technical level to implement the following: (a) to identify and explore present and projected needs for energy sources and conversion techniques for military applications; (b) to exchange information on current and planned efforts in these fields; (c) to examine the effect of anticipated scientific and technological advances on these efforts; and (d) to present suggested programs aimed at satisfying the military needs for energy sources and conversion techniques. Volume I contains all of the unclassified papers presented at the Seminar. (W.D.M.)

  15. Generation and use of process maps for hot extrusion of seamless tubes for nuclear applications

    International Nuclear Information System (INIS)

    Vaibhaw, Kumar; Jha, S.K.; Saibaba, N.; Jayaraj, R.N.

    2009-01-01

    Full text: Hot extrusion is known as significant bulk deformation step in manufacturing of seamless tube production. Elevated temperature deformation carried out above the recrystallization temperature would enable imposition of large strains in single step. This deformation causes a significant change in the microstructure of the material and depends on extrusion process parameters such as temperature and strain rate (Ram speed). Basic microstructure developed at this deformation stage has significant bearing on the final properties of the material fabricated with subsequent cold working steps. Zirconium alloys and special nuclear grade austenitic stainless steels are two important groups of materials used as structural and core components in thermal and fast reactors world wide respectively. The properties of former alloy are very sensitive to the thermo mechanical fabrication steps initiated with hot extrusion due to their anisotropic deformation behaviour. However, nuclear grade austenitic stainless steels have many variants from their commercial grades in terms of micro and macro alloy chemistry. Factors such as these significantly affect the workability of the materials and require proper selection of extrusion parameters especially working temperature and extrusion speed plays a key role in the quality of the product. Modern developments in processing technology envisage the application of processing maps based on dynamic material model for selection of hot extrusion parameters. The present paper is aimed at bringing out significance of the map in selection of working domain with respect to the industrial process conditions for both groups of nuclear materials mentioned earlier. Developed process maps of certain alloys suggest use of extremely slow strain rate and low temperature extrusion which can not be achieved during bulk processing due to design of equipment and heat transfer constraints in industrial scale production. Attempts are made to highlight

  16. Optimal design of an extrusion process for a hinge bracket

    International Nuclear Information System (INIS)

    Na, Geum Ju; Jang, Myung Geun; Kim, Jong Bong

    2016-01-01

    This study considers process design in forming a hinge bracket. A thin hinge bracket is typically produced by bending a sheet panel or welding a hollow bar into a sheet panel. However, the hinge bracket made by bending or welding does not have sufficient durability in severe operating conditions because of the stress concentration in the bended region or the low corrosion resistance of the welded region. Therefore, this study uses forming to produce the hinge bracket part of a foldable container and to ensure durability in difficult operating conditions. An extrusion process for a T-shaped hinge bracket is studied using finite element analysis. Preliminary analysis shows that a very high forging load is required to form the bracket by forging. Therefore, extrusion is considered as a candidate process. Producing the part through the extrusion process enables many brackets to be made in a single extrusion and through successive cutting of the extruded part, thereby reducing the manufacturing cost. The design focuses on reducing the extrusion load and on ensuring shape accuracy. An initial billet is designed to reduce the extrusion load and to obtain a geometrically accurate part. The extruded part is bent frequently because of uneven material flow. Thus, extrusion die geometries are designed to obtain straight parts.

  17. Optimal design of an extrusion process for a hinge bracket

    Energy Technology Data Exchange (ETDEWEB)

    Na, Geum Ju; Jang, Myung Geun; Kim, Jong Bong [Seoul National University, Seoul (Korea, Republic of)

    2016-05-15

    This study considers process design in forming a hinge bracket. A thin hinge bracket is typically produced by bending a sheet panel or welding a hollow bar into a sheet panel. However, the hinge bracket made by bending or welding does not have sufficient durability in severe operating conditions because of the stress concentration in the bended region or the low corrosion resistance of the welded region. Therefore, this study uses forming to produce the hinge bracket part of a foldable container and to ensure durability in difficult operating conditions. An extrusion process for a T-shaped hinge bracket is studied using finite element analysis. Preliminary analysis shows that a very high forging load is required to form the bracket by forging. Therefore, extrusion is considered as a candidate process. Producing the part through the extrusion process enables many brackets to be made in a single extrusion and through successive cutting of the extruded part, thereby reducing the manufacturing cost. The design focuses on reducing the extrusion load and on ensuring shape accuracy. An initial billet is designed to reduce the extrusion load and to obtain a geometrically accurate part. The extruded part is bent frequently because of uneven material flow. Thus, extrusion die geometries are designed to obtain straight parts.

  18. SEMINAR ABOUT SERIOUS GAMES AND VIRTUAL WORLDS: An Experience of International Collaboration And Reflection

    Directory of Open Access Journals (Sweden)

    Wolfram LAASER

    2011-08-01

    Full Text Available The educational possibilities of ICT, dizzying and exponentially growing every day, offer multiple alternatives of mediation for teaching, learning and communication.Thus, the inclusion of video games and virtual worlds into educational context represents a qualitative leap that claims to significantly boost ways of communication and knowledge representation of the scenarios involved. Aware of this reality, in the framework of the Master of Technology Enhanced Learning at the National University of Cordoba, Argentina, a virtual seminar was offered to students to address the issue on the basis of invited lectures of worldwide recognized experts. The format chosen for the seminar allowed the treatment of subjects not only through reading assignments and web quests to be discussed collaboratively but also included the state of the art experience of developers working in the field. The paper describes didactic design and technical solutions of the seminar format.

  19. XII seminar on problems of reactor physics

    International Nuclear Information System (INIS)

    Kryuchkov, Eh.F.; Naumov, V.I.

    2003-01-01

    Results of the XII seminar Physical problems of effective and safety use of nuclear materials taking place on the basis of MEPI (September, 2002) are discussed. Reports on the directions: physical problems of advanced nuclear-energetic technologies; account, control and nuclear material management; effective and safety use of nuclear materials at NPP; programming and software for the analysis of physical processes are performed. Of particular interest is reports on actual problems of nuclear energetics and fuel cycle, on ill-intentioned use of fissile materials, efficiency of long-lived isotopes transmutation and spent fuel management [ru

  20. Astronomy Research Seminars

    Science.gov (United States)

    Genet, Russell M.

    2018-06-01

    Astronomy Research Seminars are offered by a rapidly growing number of community colleges and universities. Over the past decade some 120 student team research papers have been published with approximately 500 coauthors. Each team manages their own research, obtains and analyzes original data, writes a team paper, obtains an external review, submits their paper for publication, and gives a public PowerPoint presentation. The student teams are supported by: (1) an extensive community-of-practice which consists of professional and amateur astronomers, educators, and Seminar graduates; (2) the Institute for Student Astronomical Research (www.in4star.org); (3) the Small Telescope Astronomy Research Handbook and (4) an in-person/online, open-source Canvas learning management system with videos, quizzes, and other, extensive supporting material. Team research projects are completed in a semester or less and are managed by the students themselves. The Seminars have expanded from double star astronomy to asteroid astrometry, eclipsing binary times of minima, and exoplanet transits. Conducting authentic research inspires students, provides them with important skills in teamwork, project management and scientific literacy, and gives them confidence in their abilities to participate in scientific research. Being coauthors of published papers boosts student educational careers with respect to admissions and scholarships.

  1. Lectures Abandoned: Active Learning by Active Seminars

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Corry, Aino Vonge

    2012-01-01

    Traditional lecture-based courses are widely criticised for be- ing less eective in teaching. The question is of course what should replace the lectures and various active learning tech- niques have been suggested and studied. In this paper, we report on our experiences of redesigning a software ......- tive seminars as a replacement of traditional lectures, an activity template for the contents of active seminars, an ac- count on how storytelling supported the seminars, as well as reports on our and the students' experiences....

  2. Proceedings of the fifth NUCEF seminar

    International Nuclear Information System (INIS)

    2001-12-01

    The Fifth NUCEF Seminar was held at Tokai Research Establishment, JAERI on February 27, 2001. The NUCEF Seminar aims at the promotion of effective researches and encouragement of research cooperation through the discussions and information exchanges by researchers in the field of the nuclear fuel cycle back-end. This seminar was divided into the following sessions: TRU Chemistry, Radioactive Waste Management, Criticality Safety and Partitioning/Reprocessing. At the panel discussion, important issues connected with the safety research for radioactive waste management were discussed among five speakers from the relevant organization in Japan. The 36 of the presented papers are indexed individually. (J.P.N.)

  3. Experimental and numerical investigation of ram extrusion of bread dough

    Science.gov (United States)

    Mohammed, M. A. P.; Wanigasooriya, L.; Charalambides, M. N.

    2016-10-01

    An experimental and numerical study on ram extrusion of bread dough was conducted. A laboratory ram extrusion rig was designed and manufactured, where dies with different angles and exit radii were employed. Rate dependent behaviour was observed from tests conducted at different extrusion speeds, and higher extrusion pressure was reported for dies with decreasing exit radius. A finite element simulation of extrusion was performed using the adaptive meshing technique in Abaqus. Simulations using a frictionless contact between the billet and die wall showed that the model underestimates the response at high entry angles. On the other hand, when the coefficient of friction value was set to 0.09 as measured from friction experiments, the dough response was overestimated, i.e. the model extrusion pressure was much higher than the experimentally measured values. When a critical shear stress limit, τmax, was used, the accuracy of the model predictions improved. The results showed that higher die angles require higher τmax values for the model and the experiments to agree.

  4. Food irradiation seminar: Asia and the Pacific

    International Nuclear Information System (INIS)

    Mitchell, G.E.

    1986-01-01

    The report covers the Seminar for Asia and the Pacific on the practical application of food irradiation. The seminar assessed the practical application of food irradiation processes, commercial utilisation and international trade of irradiated food

  5. Fabricating tungsten crucibles by drawing and extrusion spinning

    International Nuclear Information System (INIS)

    Edstrom, C.M.

    1981-01-01

    The fabrication of seamless tungsten crucibles 127-mm ID x 265-mm high x 6.25-mm wall thickness (5 in. x 10 1/2 in. x 1/4 in.) involved three drawing operations and extrusion spinning. The success of the drawing operations came from a combination of low draw reduction percentage, generous draw radii, large punch-to-die clearance, and attention to drawing temperature. The extrusion spinning success related to good drawn-cup-to-spinning-mandrel fit prior to making the extrusion passes, removal of stress risers in the part prior to spinning, and special attention to part and mandrel temperature

  6. Die Defects and Die Corrections in Metal Extrusion

    Directory of Open Access Journals (Sweden)

    Sayyad Zahid Qamar

    2018-05-01

    Full Text Available Extrusion is a very popular and multi-faceted manufacturing process. A large number of products for the automotive, aerospace, and construction sectors are produced through aluminum extrusion. Many defects in the extruded products occur because of the conditions of the dies and tooling. The problems in dies can be due to material issues, design and manufacturing, or severe usage. They can be avoided by maintaining the billet quality, by controlling the extrusion process parameters, and through routine maintenance. Die problems that occur on a day-to-day basis are mostly repairable and are rectified through various types of die correction operations. These defects and repair operations have not been reported in detail in the published literature. The current paper presents an in-depth description of repairable die defects and related die correction operations in metal extrusion. All major die defects are defined and classified, and their causes, preventive measures, and die correction operations are described. A brief frequency-based statistical study of die defects is also carried out to identify the most frequent die corrections. This work can be of direct benefit to plant engineers and operators and to researchers and academics in the field of metal extrusion.

  7. ORGANIZATIONAL METHODS OF SEMINAR-DISPUTE ON ECONOMICS SPECIALTIES

    Directory of Open Access Journals (Sweden)

    Tatiana ANDREEVA

    2015-12-01

    Full Text Available Actuality. The topic of teaching economic disciplines has always been relevant and useful. The article considers the technique of organization and of the seminar-dispute on economic subjects. In this paper there are also identified criteria for evaluating the participants of the seminar-dispute. Methods of teaching economic disciplines in higher education are held by holding lectures and seminars. The seminar provides an opportunity to determine the degree of independence and responsibility, to rise creativity in every student. The purpose is to disclose the main objectives of the seminar-dispute, which as a result of the preliminary work on the program material, the teacher and students are in a situation of direct active communication during performance of students on topics arising between discussion and generalizations by teacher, bu solving the problem of cognitive, developmental and educational character that imparted methodological and practical skills to students. Methods. Logical and descriptive, monographic, analysis and synthesis. Results. It should be concluded that in preparation for the seminar, students acquire the skills to work with the book, read the analysis, selection of the main and necessary speeches for the report, , and systematizing the selected materials. Students learn to clearly express their thoughts, work out the ability to speak without papers to prove their beliefs, to establish contact with the audience, etc. Accordingly, it is best to choose the topics of the seminar where the student must not only learn certain information, but also find a solution. One of the most popular forms of classes in the framework of methodological approaches to the teaching of economic disciplines is a seminar-dispute.

  8. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2011-01-01

    The Human Resources Department is organizing a Preparation for Retirement Seminar, which will take place on 18 and 21 October 2011 in the afternoon in the Main Auditorium and on 19 October and 15 and 16 November 2011 in the afternoon in the Council Chamber. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned, you are r...

  9. CHARACTERIZATION OF NEW TOOL STEEL FOR ALUMINUM EXTRUSION DIES

    OpenAIRE

    José Britti Bacalhau; Fernanda Moreno Rodrigues; Rafael Agnelli Mesquita

    2014-01-01

    Aluminum extrusion dies are an important segment of application on industrial tools steels, which are manufactured in steels based on AISI H13 steel. The main properties of steels applied to extrusion dies are: wear resistance, impact resistance and tempering resistance. The present work discusses the characteristics of a newly developed hot work steel to be used on aluminum extrusion dies. The effects of Cr and Mo contents with respect to tempering resistance and the Al addition ...

  10. Proceedings of the 8. Nordic seminar on radioecology

    Energy Technology Data Exchange (ETDEWEB)

    Ilus, E [STUK (FI)

    2002-04-01

    This report contains proceedings of the 8th Nordic Seminar on Radioecology held on February 25-28, 2001 in Rovaniemi, Finland. The Seminar was arranged by STUK - Radiation and Nuclear Safety Authority of Finland and supported by the NKS. The Seminar was intended to be a 'final forum' of the four-year NKS radioecology project BOK-2, Radioecological and Environmental Consequences, which was focused on the consequences of releases of man-made radionuclides into the environment. The programme of the Seminar consisted of 3 invited lectures, 31 oral presentations and 22 poster presentations dealing with marine, terrestrial and freshwater radioecology, methods, foodstuffs, models, whole-body counting and doses to man. (au)

  11. IACTalks: an on-line archive of astronomy-related seminars

    DEFF Research Database (Denmark)

    Knapen, Johan H.; Pérez Prieto, Jorge A.; Shahbaz, Tariq

    2012-01-01

    We present IACTalks, a free and open access seminars archive (http://iactalks.iac.es) aimed at promoting astronomy and the exchange of ideas by providing high-quality scientific seminars to the astronomical community. The archive of seminars and talks given at the Instituto de Astrofi\\'isica de...

  12. Seminar for Master's Thesis Projects: Promoting Students' Self-Regulation

    Science.gov (United States)

    Miedijensky, Shirley; Lichtinger, Einat

    2016-01-01

    This study presents a thesis seminar model aimed at promoting students' self-regulation. Students' perceptions regarding the contribution of the seminar to their learning process were characterized and the seminar's effect upon their self-regulation expressions was examined. Data was collected using questionnaires and analyzed thematically. The…

  13. Current advances and future perspectives in extrusion-based bioprinting.

    Science.gov (United States)

    Ozbolat, Ibrahim T; Hospodiuk, Monika

    2016-01-01

    Extrusion-based bioprinting (EBB) is a rapidly growing technology that has made substantial progress during the last decade. It has great versatility in printing various biologics, including cells, tissues, tissue constructs, organ modules and microfluidic devices, in applications from basic research and pharmaceutics to clinics. Despite the great benefits and flexibility in printing a wide range of bioinks, including tissue spheroids, tissue strands, cell pellets, decellularized matrix components, micro-carriers and cell-laden hydrogels, the technology currently faces several limitations and challenges. These include impediments to organ fabrication, the limited resolution of printed features, the need for advanced bioprinting solutions to transition the technology bench to bedside, the necessity of new bioink development for rapid, safe and sustainable delivery of cells in a biomimetically organized microenvironment, and regulatory concerns to transform the technology into a product. This paper, presenting a first-time comprehensive review of EBB, discusses the current advancements in EBB technology and highlights future directions to transform the technology to generate viable end products for tissue engineering and regenerative medicine. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Proceedings of the fourth NUCEF seminar

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The 4th NUCEF seminar was held at JAERI Tokai Establishment on 18 February 2000. The NUCEF seminar aims at the promotion of effective researches and the encouragement of research cooperation through the discussions and information exchanges by researchers in the field on the nuclear fuel cycle back-end. This seminar was divided in the following sessions: Criticality Safety, Reprocessing/Partitioning and Radioactive Waste Management. Especially, considering highly regrettable impact of the criticality accident at JCO, the Criticality Safety session including the Dose Evaluation focused on the evaluation of JCO Criticality Accident. This report compiles the papers presented and the related discussions. The 13 of the presented papers are indexed individually. (J.P.N.)

  15. Cellular Energy Absorbing TRIP-Steel/Mg-PSZ Composite: Honeycomb Structures Fabricated by a New Extrusion Powder Technology

    Directory of Open Access Journals (Sweden)

    Ulrich Martin

    2010-01-01

    Full Text Available Lightweight linear cellular composite materials on basis of austenite stainless TRIP- (TRansformation Induced Plasticity- steel as matrix with reinforcements of MgO partially stabilized zirconia (Mg-PSZ are described. Two-dimensional cellular materials for structural applications are conventionally produced by sheet expansion or corrugation processes. The presented composites are fabricated by a modified ceramic extrusion powder technology. Characterization of the microstructure in as-received and deformed conditions was carried out by optical and scanning electron microscopy. Magnetic balance measurements and electron backscatter diffraction (EBSD were used to identify the deformation-induced martensite evolution in the cell wall material. The honeycomb composite samples exhibit an increased strain hardening up to a certain engineering compressive strain and an extraordinary high specific energy absorption per unit mass and unit volume, respectively. Based on improved property-to-weight ratio such linear cellular structures will be of interest as crash absorbers or stiffened core materials for aerospace, railway, or automotive applications.

  16. Procyanidin content of grape seed and pomace, and total anthocyanin content of grape pomace as affected by extrusion processing.

    Science.gov (United States)

    Khanal, R C; Howard, L R; Prior, R L

    2009-08-01

    Grape juice processing by-products, grape seed and pomace are a rich source of procyanidins, compounds that may afford protection against chronic disease. This study was undertaken to identify optimal extrusion conditions to enhance the contents of monomers and dimers at the expense of large molecular weight procyanidin oligomers and polymers in grape seed and pomace. Extrusion variables, temperature (160, 170, and 180 degrees C in grape seed, and 160, 170, 180, and 190 degrees C in pomace) and screw speed (100, 150, and 200 rpm in both) were tested using mixtures of grape seed as well as pomace with decorticated white sorghum flour at a ratio of 30 : 70 and moisture content of 45%. Samples of grape seed and pomace were analyzed for procyanidin composition before and after extrusion, and total anthocyanins were determined in pomace. Additionally, chromatograms from diol and normal phase high-performance liquid chromatography were compared for the separation of procyanidins. Extrusion of both grape by-products increased the biologically important monomer and dimers considerably across all temperature and screw speeds. Highest monomer content resulted when extruded at a temperature of 170 degrees C and screw speed of 200 rpm, which were 120% and 80% higher than the unextruded grape seed and pomace, respectively. Increases in monomer and dimer contents were apparently the result of reduced polymer contents, which declined by 27% to 54%, or enhanced extraction facilitated by disruption of the food matrix during extrusion. Extrusion processing reduced total anthocyanins in pomace by 18% to 53%. Extrusion processing can be used to increase procyanidin monomer and dimer contents in grape seed and pomace. Procyanidins in grape by-products have many health benefits, but most are present as large molecular weight compounds, which are poorly absorbed. Extrusion processing appears to be a promising technology to increase levels of the bioactive low molecular weight

  17. Role of lipids in the extrusion cooking processes

    Directory of Open Access Journals (Sweden)

    Berghofe, E.

    2000-04-01

    Full Text Available Extrusion is a versatile and very efficient technology that is widely used in food and feed processing. The cooking extruders have found many applications, which include: breakfast cereals, snack foods, other cereal based products, pet food and aquatic foods, texturized vegetable proteins, confectionery products, chemical and biochemical reactions, and oil extraction. Lipids are components that play an important role in most of the extrusion cooking processes. They can act as plastificizers or emulsifiers, and affect more significantly texture and stickiness of the extrudate. This paper reviews effect of oils and other lipids reactions during extrusion cooking as well as the effects of amylase-lipid complexation on extrudate quality.La extrusión es, en general, una tecnología versátil y muy eficiente, que se aplica ampliamente en la elaboración de alimentos y piensos. Los equipos de cocción-extrusión tienen numerosas aplicaciones, entre las que pueden incluirse: los cereales de desayuno listos para comer, los aperitivos, diferentes productos basados en cereales, los piensos para animales domésticos y peces, proteínas vegetales texturizadas, productos de pastelería, reacciones químicas y bioquímicas, y la extracción de aceites. Los lípidos son componentes que juegan un papel importante en la mayoría de los procesos de cocción-extrusión. Pueden actuar como plastificantes o como emulsionantes, suministrando lubricación. En este artículo se revisan con detalle los efectos de las reacciones de los aceites y otros lípidos durante el proceso de cocción-extrucción así como el efecto de la formación de complejos amilasa-lípidos sobre la calidad de los extrudados.

  18. Machine for extrusion under vacuum

    International Nuclear Information System (INIS)

    Gautier, A.

    1958-01-01

    In a study of the behaviour of easily oxidised metals during the extrusion process, it is first necessary to find an effective mean of fighting corrosion, since this, even when barely detectable, has an important influence on the validity of the results recorded. The neatest and also the most efficient of all the methods tried consists in creating a vacuum around the test piece. Working on this principle, and at the same time respecting the conventional rules for extrusion tests (loading the sample after stabilisation at the testing temperature, differential measurements of lengthening, etc.) we found it necessary to construct an original machine. (author) [fr

  19. POS 591: International Relations Seminar "The Modern World-System."

    Science.gov (United States)

    McGowan, Patrick J.

    The syllabus outlines a college level international relations seminar with a neo-Marxist theoretical orientation. The objective of the seminar is to present an historical and comparative approach to a study of the evolution of the international political economy. Following an introduction explaining seminar objectives, grading, and course…

  20. FORMING TUBES AND RODS OF URANIUM METAL BY EXTRUSION

    Science.gov (United States)

    Creutz, E.C.

    1959-01-27

    A method and apparatus are presented for the extrusion of uranium metal. Since uranium is very brittle if worked in the beta phase, it is desirable to extrude it in the gamma phase. However, in the gamma temperature range thc uranium will alloy with the metal of the extrusion dic, and is readily oxidized to a great degree. According to this patent, uranium extrusion in thc ganmma phase may be safely carried out by preheating a billet of uranium in an inert atmosphere to a trmperature between 780 C and 1100 C. The heated billet is then placed in an extrusion apparatus having dies which have been maintained at an elevated temperature for a sufficient length of time to produce an oxide film, and placing a copper disc between the uranium billet and the die.

  1. A Mathematical Model on the Resolution of Extrusion Bioprinting for the Development of New Bioinks

    Directory of Open Access Journals (Sweden)

    Ratima Suntornnond

    2016-09-01

    Full Text Available Pneumatic extrusion-based bioprinting is a recent and interesting technology that is very useful for biomedical applications. However, many process parameters in the bioprinter need to be fully understood in order to print at an adequate resolution. In this paper, a simple yet accurate mathematical model to predict the printed width of a continuous hydrogel line is proposed, in which the resolution is expressed as a function of nozzle size, pressure, and printing speed. A thermo-responsive hydrogel, pluronic F127, is used to validate the model predictions. This model could provide a platform for future correlation studies on pneumatic extrusion-based bioprinting as well as for developing new bioink formulations.

  2. High School and Community College Astronomy Research Seminar

    Science.gov (United States)

    Genet, Russell M.; Boyce, Pat; Buchheim, Robert; Collins, Dwight; Freed, Rachel; Harshaw, Richard; Johnson, Jolyon; Kenney, John; Wallen, Vera

    2016-06-01

    For the past decade, Cuesta College has held an Astronomy Research Seminar. Teams of high school and community college students, with guidance from instructors and advanced amateur astronomers, have made astronomical observations, reduced their data, and submitted their research results to appropriate journals. A variety of projects, using modest-aperture telescopes equipped with low-cost instruments, are within reach of motivated students. These include double star astrometry, variable star photometry, and exoplanet transit timing. Advanced scientific knowledge and mastery of sophisticated experimental skills are not required when the students are immersed within a supportive community of practice. The seminar features self-paced, online learning units, an online textbook (the Small Telescope Astronomical Research Handbook), and a supportive website sponsored by the Institute for Student Astronomical Research (www.In4StAR.org). There are no prerequisites for the seminar. This encourages everyone—including underrepresented minorities and persons with disabilities—to participate. Each participant contributes as their time, talents, and experience dictates, thus replicating the modern, professional research team. Our spring 2015 seminar was the largest yet. Volunteer assistant instructors provided local in-person leadership, while the entire seminar met online for PowerPoint presentations on proposed projects and final research results. Some 37 students from eight schools finished the seminar as coauthors of 19 papers published in the January 2016 volume of the Journal of Double Star Observations. Robotic telescopes devoted to student research are coming online at both Concordia University and the Boyce Astronomical Robotic Observatory, as is a central online sever that will provide students with uniform, cost-free reduction and analysis software. The seminar has motivated many of its graduates to pursue careers in science, engineering, and medicine, often with

  3. Climate technology and energy efficiency. From ''best practice'' experiences to policy diffusion. Climate technology initiative capacity building seminar for CEE/FSU countries. Seminar proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Tempel, Sybille; Moench, Harald [eds.; Mez, Lutz; Krug, Michael; Grashof, Katharina [Free Univ. Berlin (DE). Environmental Policy Research Centre (FFU)

    2005-01-15

    The seminar proceedings cover the following contributions following the opening address: Germany's climate protection program - a step by step approach; the renewable energy act in Germany; CTI's activities for technology transfer on climate change; the climate protection programs of the Federal states: the example of Bavaria; UNECE energy efficiency market formation activities and investment project development to reduce GHG emissions in economies in transition; energy efficiency - policy designs and implementation in PEEREA countries; environmental fiscal reform in Germany; instruments to overcome existing barriers to energy efficiency projects in Bulgaria; proposal to establish a testing ground facility for JI projects in the Baltic sea region testing ground; the Baltic sea region joint implementation testing ground, the Estonian perspective; policy instrumentation; financing international market penetration of renewable energies: a report on the German export initiative; the Dutch ERUPT and CERUPT programs - lessons and outlook; co-operation between Austrian and Central and Eastern Europe in the field of energy efficiency and renewable energy; biomass and pellet market:: implementation strategies in Slovakia; results of monitoring of the German biomass ordinance; developing RES strategy for the Czech republic; building retrofit and renewable energy; energy conversion; between economics and environment - energy saving in German housing sector; implementation and performance contracting in Slovenia; sustainable institutional mechanisms of efficient energy use in Rostov oblast health care and educational facilities; towards sustainable housing management in Lithuania; emissions trading will accelerate the introduction of renewable energies into the markets; Energy efficiency in residential and public buildings; international climate protection policy; long-term perspectives for as sustainable energy future in Germany, the Danish program Energy 21; the Japanese

  4. 2. National Seminar on Acceptance and Trade of Irradiated Foods. Proceedings; 2. Seminario Nacional Aceptacion y Comercio de Alimentos Irradiados. Memorias

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This proceedings is a compilation of 18 papers presented at the National Seminar on Acceptance and Trade of Irradiated Food, held in Toluca, Mexico, 27-29 October 1997. It generally deals with international and national legal, technological, health and commercial aspects of food irradiation. Public confidence and consumer acceptance of irradiated food stuff is also the subject of the seminar

  5. 2. National Seminar on Acceptance and Trade of Irradiated Foods. Proceedings; 2. Seminario Nacional Aceptacion y Comercio de Alimentos Irradiados. Memorias

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This proceedings is a compilation of 18 papers presented at the National Seminar on Acceptance and Trade of Irradiated Food, held in Toluca, Mexico, 27-29 October 1997. It generally deals with international and national legal, technological, health and commercial aspects of food irradiation. Public confidence and consumer acceptance of irradiated food stuff is also the subject of the seminar

  6. Current means for plasma diagnostics and their application for materials and environment control. Materials of IV Russian seminar

    International Nuclear Information System (INIS)

    2003-01-01

    The collection contains reports made at the Fourth Russian seminar Current means of plasma diagnostics and their application for materials and environment control. The seminar took place in Moscow, November 12-14, 2003. The content of the collection covers both questions of plasma diagnostics in thermonuclear reactors and problems of diagnostics of pulsed and stationary gas discharges in research and technological installations. The reports on plasma diagnostics applied for some tasks of medicine and environment control are presented [ru

  7. Proceedings of the 8. Nordic seminar on radioecology

    Energy Technology Data Exchange (ETDEWEB)

    Ilus, E. [STUK (FI)] (ed.)

    2002-04-01

    This report contains proceedings of the 8th Nordic Seminar on Radioecology held on February 25-28, 2001 in Rovaniemi, Finland. The Seminar was arranged by STUK - Radiation and Nuclear Safety Authority of Finland and supported by the NKS. The Seminar was intended to be a 'final forum' of the four-year NKS radioecology project BOK-2, Radioecological and Environmental Consequences, which was focused on the consequences of releases of man-made radionuclides into the environment. The programme of the Seminar consisted of 3 invited lectures, 31 oral presentations and 22 poster presentations dealing with marine, terrestrial and freshwater radioecology, methods, foodstuffs, models, whole-body counting and doses to man. (au)

  8. Barriers to Innovation--A Seminar Report. Occasional Paper InTER/11/89.

    Science.gov (United States)

    Rhodes, Valerie

    This report is based on discussions and papers circulated at a seminar on barriers to innovation in primary schools. Issues that relate to computers and the teacher are discussed in the first section, including ownership of the technology and models and strategies for inservice teacher education. Focusing on issues pertaining to computers and the…

  9. Application of extrusion-cooking technique for foamed starch-based materials

    Directory of Open Access Journals (Sweden)

    Combrzyński Maciej

    2018-01-01

    Full Text Available Foamed materials are widely used, mainly as a protection objects during transport of various products. Traditionally foams are produced from plastics so they are very difficult for waste management. It is the challenge for many scientific centres to develop a technology for the production of bio-based materials which can be rapidly decomposed. The task for the researcher is to obtain a relatively cheap, easy to use and completely biodegradable materials. The aim of this work was the selection of the main raw materials, functional additives and process parameters to obtain the most effective parameters of extrusion-cooking process for foamed starch-based materials. Properties of the products and processing costs were taken into account. During the study, the extrusion-cooking process was performed under various conditions: temperature, humidity, type of the die, screw rotational speed, various raw materials and additives blends. The best results were obtained for mixtures based on potato starch and with addition the foaming agent Plastron foam PDE and poly(vinyl alcohol PVA.

  10. Functionality of extrusion--texturized whey proteins.

    Science.gov (United States)

    Onwulata, C I; Konstance, R P; Cooke, P H; Farrell, H M

    2003-11-01

    Whey, a byproduct of the cheesemaking process, is concentrated by processors to make whey protein concentrates (WPC) and isolates (WPI). Only 50% of whey proteins are used in foods. In order to increase their usage, texturizing WPC, WPI, and whey albumin is proposed to create ingredients with new functionality. Extrusion processing texturizes globular proteins by shearing and stretching them into aligned or entangled fibrous bundles. In this study, WPC, WPI, and whey albumin were extruded in a twin screw extruder at approximately 38% moisture content (15.2 ml/min, feed rate 25 g/min) and, at different extrusion cook temperatures, at the same temperature for the last four zones before the die (35, 50, 75, and 100 degrees C, respectively). Protein solubility, gelation, foaming, and digestibility were determined in extrudates. Degree of extrusion-induced insolubility (denaturation) or texturization, determined by lack of solubility at pH 7 for WPI, increased from 30 to 60, 85, and 95% for the four temperature conditions 35, 50, 75, and 100 degrees C, respectively. Gel strength of extruded isolates increased initially 115% (35 degrees C) and 145% (50 degrees C), but gel strength was lost at 75 and 100 degrees C. Denaturation at these melt temperatures had minimal effect on foaming and digestibility. Varying extrusion cook temperature allowed a new controlled rate of denaturation, indicating that a texturized ingredient with a predetermined functionality based on degree of denaturation can be created.

  11. Proceedings of the third NUCEF seminar

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    The Third NUCEF Seminar was held at JAERI Tokai Establishment on 24 February 1998. This seminar was planned by researchers in JAERI for effective research promotion and cooperation, and researchers from both the inside and outside of JAERI presented one plenary session and 12 papers in the following three technical sessions: Criticality Safety, Reprocessing and Partitioning, and Radioactive Waste Management. (J.P.N.)

  12. Orthodontic extrusion in the transitional dentition: a simple technique.

    LENUS (Irish Health Repository)

    Darby, Laura J

    2009-11-01

    Extrusion of teeth may be necessary in cases of delayed eruption, primary retention, traumatically intruded teeth, or subgingivally fractured teeth. Removable appliances are advantageous, as anchorage is not as tooth-dependant as in the case of fixed appliances. They are cost-effective, operator friendly, and a valuable treatment option to consider in cases where extrusion of anterior teeth in the transitional dentition is necessary. The purpose of this paper was to describe a simple, cost-effective technique using a removable appliance for extrusion of incisors in the transitional dentition.

  13. Israel Seminar 2002-2003

    CERN Document Server

    Milman, Vitali D

    2004-01-01

    The Israeli GAFA seminar (on Geometric Aspect of Functional Analysis) during the years 2002-2003 follows the long tradition of the previous volumes. It reflects the general trends of the theory. Most of the papers deal with different aspects of the Asymptotic Geometric Analysis. In addition the volume contains papers on related aspects of Probability, classical Convexity and also Partial Differential Equations and Banach Algebras. There are also two expository papers on topics which proved to be very much related to the main topic of the seminar. One is Statistical Learning Theory and the other is Models of Statistical Physics. All the papers of this collection are original research papers.

  14. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  15. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  16. Preparing for retirement - new seminars

    CERN Multimedia

    Human Resources Department

    2015-01-01

    We would like to take the opportunity to inform you about a new programme related to retirement, organised by the Human Resources Department. Retirement marks the end of a career and the start of a new chapter in life.  In all cases, being well-informed and prepared is necessary to cope successfully with this transition. The programme has been developed for staff members and consists of two seminars: Leaving CERN (half day seminar): short presentations by internal speakers, focusing on what options CERN offers at the end of your career: organised once per year, next session scheduled on 24 November 2015, in the afternoon, enrolment and more information on Indico.   Preparation for retirement (2-day seminar): interactive workshop (in small groups) delivered by external experts, focusing on how to prepare psychologically as well as practically to cope with all the changes retirement brings: organised regularly in 2016, in English or ...

  17. Proceedings of the 30. Arctic and Marine Oilspill Program (AMOP) Technical Seminar

    International Nuclear Information System (INIS)

    2007-01-01

    This conference was a forum for technology transfer among professionals working in the field of Arctic and marine oil spills, spill assessment, cleanup and control. It was attended by researchers developing oil spill countermeasures technology as well as regulators interested in controlling and managing oil spills. The conference included a technical seminar on chemical spills (TSOCS) for those involved in preventing, managing and controlling spills of hazardous materials. Biological solutions for remediating and rehabilitating contaminated sites were also presented. The presentations on leading-edge technologies used in marine oil spill response operations were presented during different sessions of the conference entitled: (1) physical and chemical properties and behaviour of spilled oil, (2) oil spill treating agents, (3) activity updates and contingency planning, (4) biological effects of oil and hydrocarbons and oil biodegradation, (5) containment and recovery, (6) shoreline protection and cleanup/in-situ burning, (7) detection, tracking and remote sensing, and (8) spill modelling. In addition to a poster session with papers, the conference also featured a technical seminar on chemical spills with a special session on DRDC field trials. The conference featured 55 presentations, of which 36 have been catalogued separately for inclusion in this database. refs., tabs., figs

  18. JSPS-CAS Core University Program seminar. Proceedings of Japan-China joint seminar on atomic and molecular processes in plasma

    International Nuclear Information System (INIS)

    Koike, Fumihiro; Dong Chenzhong

    2010-02-01

    As one of the activities of JSPS-CAS Core University Program, Japan-China Joint Seminar on Atomic and Molecular Processes in Plasma was held on October 26 - 31, 2009 in Xi'an, China. The total number of the officially registered participants was 54, in which 18 from Japan, 35 from China, and 1 from USA. And this seminar is an extension of the last two seminars that were held on March 6 - 11, 2004 in Lanzhou, China, and on October 6 - 12, 2007 in Dunhuang, China. In the nuclear fusion plasma, there are quite a variety of atomic processes such as ionization, excitation, radiative recombination, non-radiative recombination (di-electronic recombination, collisional electron transfer), cascade radiation, and cascade Auger decay over the wide range of plasma temperature. The knowledge of those processes is indispensable for the evaluation and improvement of the plasma properties. Because of the diversity of the subject, it is desirable to investigate them by international collaboration groups. The present seminar may contribute to realize the above stated aim; especially it has given an opportunity for the collaborative workers to illustrate their achievements. This seminar summarizes the collaborative researches for the last decade and propose the issues for the future prospect. The 30 of the presented papers are indexed individually. (J.P.N.)

  19. The Center for Advanced Food Technology: Food Related Studies.

    Science.gov (United States)

    1992-11-16

    34Molecular Restructuring and Complexation During Extrusion of Cornmeal ," Food Extnusion Scie-nce and Technology pp. 437-448.j J, Kokini, C.-T. Ho, M. Karwe...L-F., and K-Y. Chan (1991) "Molecular Transformations of Starch and Protein During Twin-Screw Extrusion Processing of Cornmeal ," Food Extrusion

  20. International school-seminar on heavy ion physics

    International Nuclear Information System (INIS)

    Oganesyan, Yu.Ts.

    1990-01-01

    The reports of the International school-seminar on heavy ion physics are presented. Scientific program of the school-seminar covers a wide spectrum of the today trends of investigations conducted using heavy ion beams within the energy range from several MeV/nucleon up to several GeV/nucleon

  1. Physicochemical and Microstructural Characterization of Corn Starch Edible Films Obtained by a Combination of Extrusion Technology and Casting Technique.

    Science.gov (United States)

    Fitch-Vargas, Perla Rosa; Aguilar-Palazuelos, Ernesto; de Jesús Zazueta-Morales, José; Vega-García, Misael Odín; Valdez-Morales, Jesús Enrique; Martínez-Bustos, Fernando; Jacobo-Valenzuela, Noelia

    2016-09-01

    Starch edible films (EFs) have been widely studied due to their potential in food preservation; however, their application is limited because of their poor mechanical and barrier properties. Because of that, the aim of this work was to use the extrusion technology (Ex T) as a pretreatment of casting technique to change the starch structure in order to obtain EFs with improved physicochemical properties. To this, corn starch and a mixture of plasticizers (sorbitol and glycerol, in different ratios) were processed in a twin screw extruder to generate the starch modification and subsequently casting technique was used for EFs formation. The best conditions of the Ex T and plasticizers concentration were obtained using response surface methodology. All the response variables evaluated, were affected significatively by the Plasticizers Ratio (Sorbitol:Glycerol) (PR (S:G)) and Extrusion Temperature (ET), while the Screw Speed (SS) did not show significant effect on any of these variables. The optimization study showed that the appropriate conditions to obtain EFs with the best mechanical and barrier properties were ET = 89 °C, SS = 66 rpm and PR (S:G) = 79.7:20.3. Once the best conditions were obtained, the optimal treatment was characterized according to its microstructural properties (X-ray diffraction, Scanning Electron Microscopy and Atomic Force Microscopy) to determine the damage caused in the starch during Ex T and casting technique. In conclusion, with the combination of Ex T and casting technique were obtained EFs with greater breaking strength and deformation, as well as lower water vapor permeability than those reported in the literature. © 2016 Institute of Food Technologists®

  2. Use of a high temperature hydrostatic extrusion technique for powders strengthening

    International Nuclear Information System (INIS)

    Decours, J.; Gavinet, J.; Weisz, M.

    1975-01-01

    A conventional 575 tonnes extrusion press has been modified by a device permitting the extrusion process by hydrostatic pression through a leakless mechanical set (13,000 bars maximum), from room temperature to 1,200 deg C. This new device allows: the high temperature hydrostatic extrusion for strengthening of powders, the isostatic compression of powders. Examples of realisations obtained by this process are described, including the influence of different parameters: pressure, temperature, extrusion ratio and for different materials: pure metals (iron, nickel, niobium, etc...) and alloys (stainless steel, molybdenum, niobium nickel alloys, etc...). Then, the advantages of the process are emphasized [fr

  3. Embedded Multimaterial Extrusion Bioprinting

    NARCIS (Netherlands)

    Rocca, Marco; Fragasso, Alessio; Liu, Wanjun; Heinrich, Marcel A.; Zhang, Yu Shrike

    Embedded extrusion bioprinting allows for the generation of complex structures that otherwise cannot be achieved with conventional layer-by-layer deposition from the bottom, by overcoming the limits imposed by gravitational force. By taking advantage of a hydrogel bath, serving as a sacrificial

  4. FDM 3D printing of modified drug-delivery systems using hot melt extrusion: a new approach for individualized therapy.

    Science.gov (United States)

    Cunha-Filho, Marcilio; Araújo, Maísa Rp; Gelfuso, Guilherme M; Gratieri, Tais

    2017-11-01

    The production process of 3D-printed drugs offers unique advantages such as the possibility of individualizing the drug therapy and easily associating different drugs and release technologies in the same pharmaceutical unit. Fused deposition modeling, a 3D printing technique, seems especially interesting for pharmaceutical applications, due to its low cost, precise and reproducible control of the printed structures, and versatility for industrial and laboratory scale. This technique combined with another technology already adapted for the pharmaceutical industry, the hot melt extrusion, is able to incorporate various mechanisms of modified drug release. This special report aims to bring together data of the experimental progress achieved using the fused deposition modeling 3D printing combined with hot melt extrusion technique and its potential in drug delivery. [Formula: see text].

  5. JSPS-CAS Core University Program seminar on summary of 10-year collaborations in plasma and nuclear fusion research area

    International Nuclear Information System (INIS)

    Toi, Kazuo; Wang Kongjia

    2011-07-01

    The JSPS-CAS Core University Program (CUP) seminar on “Summary of 10-year Collaborations in Plasma and Nuclear Fusion Research Area” was held from March 9 to March 11, 2011 in the Okinawa Prefectural Art Museum, Naha city, Okinawa, Japan. The collaboration program on plasma and nuclear fusion started from 2001 under the auspices of Japanese Society of Promotion of Science (JSPS) and Chinese Academy of Sciences (CAS). This year is the last year of the CUP. This seminar was organized in the framework of the CUP. In the seminar, 29 oral talks were presented, having 14 Chinese and 30 Japanese participants. These presentations covered key topics related to the collaboration categories: (1) improvement of core plasma properties, (2) basic research on fusion reactor technologies, and (3) theory and numerical simulation. This seminar aims at summarizing the results obtained through the collaborations for 10 years, and discussing future prospects of China-Japan collaboration in plasma and nuclear fusion research areas. (author)

  6. 2015 Cross-Domain Deterrence Seminar Bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Juarez, Anthony [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-02-04

    In November 2015, the Center for Global Security Research, NSO, and Global Security program jointly sponsored a seminar investigating questions related to cross-domain deterrence at Lawrence Livermore National Laboratory. At the seminar, experts were asked to moderate discussion based on the four topics below. For each of these topics, we have compiled a short list of literature that will help analysts develop a baseline understanding of the issue.

  7. Proceedings on the seminar on small hydroelectric installations: Practice report and current development; Beitraege zum Seminar Kleinwasserkraft: Praxis und aktuelle Entwicklung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This seminar on small hydroelectric installations informs on aspects of construction and administrative aspects. But above all, questions of machinery are dealt with. The book gives an overview of turbine types, topical recent developments in the sector of small hydroelectric power stations, and modern opportunities for fast and inexpensive design of power station components. Beyond the discussion of technical issues, the seminar wants to further contacts between science, turbine manufacturers, consultants and plant operators. (orig.) [Deutsch] Das Seminar Kleinwasserkraft gibt eine Uebersicht ueber bauliche Gestaltung und behoerdliche Aspekte. Vorallem behandelt es aber maschinenbauliche Problemstellungen. Es zeigt einen Ueberblick ueber Turbinentypen, aktuelle Neuentwicklungen im Kleinwassersektor, sowie moderne Moeglichkeiten zum schnellen und preiswerten Design von Kraftwerkskomponenten. Neben dem technischen Teil dient das Seminar auch der Foerderung des Kontakts zwischen Wissenschaft, Turbinenherstellern, Consultants und Anlagenbetreibern. (orig.)

  8. Inline UV/Vis spectroscopy as PAT tool for hot-melt extrusion.

    Science.gov (United States)

    Wesholowski, Jens; Prill, Sebastian; Berghaus, Andreas; Thommes, Markus

    2018-01-11

    Hot-melt extrusion on co-rotating twin screw extruders is a focused technology for the production of pharmaceuticals in the context of Quality by Design. Since it is a continuous process, the potential for minimizing product quality fluctuation is enhanced. A typical application of hot-melt extrusion is the production of solid dispersions, where an active pharmaceutical ingredient (API) is distributed within a polymer matrix carrier. For this dosage form, the product quality is related amongst others to the drug content. This can be monitored on- or inline as critical quality attribute by a process analytical technology (PAT) in order to meet the specific requirements of Quality by Design. In this study, an inline UV/Vis spectrometer from ColVisTec was implemented in an early development twin screw extruder and the performance tested in accordance to the ICH Q2 guideline. Therefore, two API (carbamazepine and theophylline) and one polymer matrix (copovidone) were considered with the main focus on the quantification of the drug load. The obtained results revealed the suitability of the implemented PAT tool to quantify the drug load in a typical range for pharmaceutical applications. The effort for data evaluation was minimal due to univariate data analysis, and in combination with a measurement frequency of 1 Hz, the system is sufficient for real-time data acquisition.

  9. Effects of raw material extrusion and steam conditioning on feed pellet quality and nutrient digestibility of growing meat rabbits.

    Science.gov (United States)

    Liao, Kuoyao; Cai, Jingyi; Shi, Zhujun; Tian, Gang; Yan, Dong; Chen, Delin

    2017-06-01

    This study was conducted to investigate the effects of raw material extrusion and steam conditioning on feed pellet quality and nutrient digestibility of growing meat rabbits, in order to determine appropriate rabbit feed processing methods and processing parameters. In Exp. 1, an orthogonal design was adopted. Barrel temperature, material moisture content and feed rate were selected as test factors, and acid detergent fiber (ADF) content was selected as an evaluation index to research the optimum extrusion parameters. In Exp. 2, a two-factor design was adopted. Four kinds of rabbit feeds were processed and raw material extrusion adopted optimum extrusion parameters of Exp. 1. A total of 40 healthy and 42-day-old rabbits with similar weight were used in a randomized design, which consisted of 4 groups and 10 replicates in each group (1 rabbits in each replicate). The adaptation period lasted for 7 d, and the digestion trial lasted for 4 d. The results showed as follows: 1) ADF was significantly affected by barrel temperature ( P  digestibility of dry matter and total energy ( P  digestibility of crude fiber (CF), ADF and NDF ( P  digestibility of rabbit feed. Thus, using extrusion and steam conditioning technology at the same time in the weaning rabbits feed processing can improve the pellet quality and nutrient apparent digestibility of rabbit feed.

  10. 2015 Cross-Domain Deterrence Seminar Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Juarez, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-01-11

    Lawrence Livermore National Laboratory (LLNL) hosted the 2nd Annual Cross-Domain Deterrence Seminar on November 17th, 2015 in Livermore, CA. The seminar was sponsored by LLNL’s Center for Global Security Research (CGSR), National Security Office (NSO), and Global Security program. This summary covers the seminar’s panels and subsequent discussions.

  11. CHARACTERIZATION OF NEW TOOL STEEL FOR ALUMINUM EXTRUSION DIES

    Directory of Open Access Journals (Sweden)

    José Britti Bacalhau

    2014-06-01

    Full Text Available Aluminum extrusion dies are an important segment of application on industrial tools steels, which are manufactured in steels based on AISI H13 steel. The main properties of steels applied to extrusion dies are: wear resistance, impact resistance and tempering resistance. The present work discusses the characteristics of a newly developed hot work steel to be used on aluminum extrusion dies. The effects of Cr and Mo contents with respect to tempering resistance and the Al addition on the nitriding response have been evaluated. From forged steel bars, Charpy impact test and characterization via EPMA have been conducted. The proposed contents of Cr, Mo, and Al have attributed to the new VEX grade a much better tempering resistance than H13, as well as a deeper and harder nitrided layer. Due to the unique characteristics, this new steel provides an interesting alternative to the aluminum extrusion companies to increase their competitiveness.

  12. Proceedings of the first international seminar on seismic base isolation for nuclear power facilities

    International Nuclear Information System (INIS)

    1989-01-01

    The First International Seminar on Seismic Base Isolation of Nuclear Power Facilities was organized by the authors of this paper. It was held in San Francisco, California, USA, on August 21--22, 1989, in conjunction with the tenth International Conference on Structural Mechanics in Reactor Technology (SMiRT-10). The purpose of the seminar was to provide an international forum for discussion on the application of base isolation to nuclear power plants and of its effectiveness in reducing seismic loads and permitting standard plant designs. It also provided an opportunity for technical interchange between base isolation system designers, structural engineers, and nuclear power plant engineers. Seismic isolation is certainly one of the most significant earthquake engineering developments in recent years. This was clearly demonstrated by the very large attendance at this seminar and the various papers presented. Isolation system act as filters that reduce the seismic forces and increase the ability of isolated structures and their contents to withstand the damaging effects of earthquake motions. Each individual paper has been cataloged separately

  13. Finite element analysis of the combined fine blanking and extrusion process

    Science.gov (United States)

    Zheng, Peng-Fei

    The combined fine blanking and extrusion process is such a metal forming process that fine blanking and forward extrusion are carried out on sheet metal material at the same time. There are two typical characteristics in this process, one is the fine blanking whose deformation mechanism is different from conventional blanking; the other is the sheet metal extrusion, which is different from the conventional extrusion. Even though fine blanking has been used in industry for many years, only limited literature can be found which deals with the theoretical analysis of it. On the other hand, no publications on the theoretical analysis of the sheet metal extrusion have been found. Intensive work should be carried out to reveal the mechanism of both fine blanking process and sheet metal extrusion process, and further the combined fine blanking and extrusion process. The scope of this thesis is to study the mechanics of fine blanking, sheet metal extrusion, and combined fine blanking and extrusion process one by one with the rigid-plastic finite element method. All of above processes are typical unsteady ones, especially the fine blanking process in which extremely severe and localized deformation occurs. Therefore, commercial programs can not be used to solve these problems up till now. Owing to this reason, a rigid-plastic finite element program was developed for simulating these processes where remeshing and mesh tracing techniques as well as the golden section method were adopted according to the characteristics of these processes in this thesis. Moreover, a permissible kinematic velocity field was adopted as the initial velocity field for simulating extrusion process successfully. Results from the simulation included the distorted mesh, the field of material flow, the stress and the strain distributions at various moments of deformation. Results under different deformation conditions such as different blanking clearances, different diameters of the extrusion punch and

  14. IMPORTANT DEGRADATIONS IN POLYETHYLENE TERAPHTALATE EXTRUSION PROCESS

    Directory of Open Access Journals (Sweden)

    Şule ALTUN

    2003-01-01

    Full Text Available Polyethylene terephthalate (PET is one of the most used thermo-plastic polymers. The total consumption of PET has been about 30 million tons in the year 2000. Polyester fibers constitute about 60 % of total synthetic fibers consumption. During extrusion, PET polymer is faced to thermal, thermo-oxidative and hydrolytic degradation, which result in severe reduction in its molecular weight, thereby adversely affecting its subsequent melt processability. Therefore, it is essential to understand degradation processes of PET during melt extrusion.

  15. 3rd DAtF-seminar on the development of potential for young scientists and engineers in nuclear technology

    International Nuclear Information System (INIS)

    Gassner, H.

    2003-01-01

    The 3 rd seminar organized by the Deutsches Atomforum e.V. for young nuclear scientists and engineers seeking to realize their potential was about 'Communication - Key to Acceptance'. The topic was presented in contributions outlining the scientific viewpoint and in results of practical everyday experience. The young participants from all areas of the nuclear industry were sensitized to the problem areas under discussion, which were then debated in more detail. Reference was made to the importance of continuous communication with all participants. The seminar offered valuable suggestions for working with the media and the public, but also for handling information in one's daily work. (orig.)

  16. Nordic seminar on biomass gasification and combustion

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The report comprises a collection of papers from a seminar arranged as a part of the Nordic Energy Research Program. The aim of this program is to strengthen the basic competence in the energy field at universities and research organizations in the Nordic countries. In the program 1991-1994 six areas are selected for cooperation such as energy and society, solid fuels, district heating, petroleum technology, bioenergy and environment, and fuel cells. The topics deal both with biomass combustion and gasification, and combustion of municipal solid waste (MSW) and refuse derived fuel (RDF). A number of 11 papers are prepared. 97 refs., 91 figs., 11 tabs.

  17. Nordic seminar on biomass gasification and combustion

    International Nuclear Information System (INIS)

    1993-01-01

    The report comprises a collection of papers from a seminar arranged as a part of the Nordic Energy Research Program. The aim of this program is to strengthen the basic competence in the energy field at universities and research organizations in the Nordic countries. In the program 1991-1994 six areas are selected for cooperation such as energy and society, solid fuels, district heating, petroleum technology, bioenergy and environment, and fuel cells. The topics deal both with biomass combustion and gasification, and combustion of municipal solid waste (MSW) and refuse derived fuel (RDF). A number of 11 papers are prepared. 97 refs., 91 figs., 11 tabs

  18. Nordic seminar on biomass gasification and combustion

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The report comprises a collection of papers from a seminar arranged as a part of the Nordic Energy Research Program. The aim of this program is to strengthen the basic competence in the energy field at universities and research organizations in the Nordic countries. In the program 1991-1994 six areas are selected for cooperation such as energy and society, solid fuels, district heating, petroleum technology, bioenergy and environment, and fuel cells. The topics deal both with biomass combustion and gasification, and combustion of municipal solid waste (MSW) and refuse derived fuel (RDF). A number of 11 papers are prepared. 97 refs., 91 figs., 11 tabs.

  19. Extrusion: An environmentally friendly process for PEMFC membrane elaboration

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, J.-Y.; Iojoiu, C.; Marechal, M. [LEPMI, UMR 5631 CNRS-INPG-UJF, ENSEEG, BP 75, F-38402, Saint Martin d' Heres (France); Chabert, F.; El Kissi, N. [Rheologie, UMR 5520 CNRS-INPG-UJF, ENSHMG, BP 53, F-38041, Grenoble (France); Salomon, J.; Mercier, R. [LMOPS UMR CNRS 5041, BP 24, F-69390 Vernaison (France); Piffard, Y. [CNRS Universite de Nantes, Institut des Materiaux Jean Rouxel, UMR 6502, BP 32229, F-44322, Nantes Cedex 3 (France); Galiano, H. [CEA, Le Ripault Research Center, BP 16, F-37260, Monts (France)

    2007-12-31

    The paper deals with the use of extrusion to process PEMFC filled and unfilled membranes. Several routes including the sulfonation of filled and unfilled extruded membranes and the extrusion of filled and unfilled ionomers are reported. Thanks to the use of selected water-soluble aid process plasticizers, acid and alkaline forms of sulfonated polyethersulfone were, for the first time, successfully extruded. The extrusion process did not lead to any degradation of the ionomer performances. Decreasing the membrane cost while using environmentally friendly elaboration conditions, it should be helpful to an industrial production. In addition, avoiding filler sedimentation it should allow homogeneous composite membranes to be obtained. (author)

  20. Towards Extrusion of Ionomers to Process Fuel Cell Membranes

    Directory of Open Access Journals (Sweden)

    Jean-Yves Sanchez

    2011-07-01

    Full Text Available While Proton Exchange Membrane Fuel Cell (PEMFC membranes are currently prepared by film casting, this paper demonstrates the feasibility of extrusion, a solvent-free alternative process. Thanks to water-soluble process-aid plasticizers, duly selected, it was possible to extrude acidic and alkaline polysulfone ionomers. Additionally, the feasibility to extrude composites was demonstrated. The impact of the plasticizers on the melt viscosity was investigated. Following the extrusion, the plasticizers were fully removed in water. The extrusion was found to impact neither on the ionomer chains, nor on the performances of the membrane. This environmentally friendly process was successfully validated for a variety of high performance ionomers.

  1. Apical extrusion of debris: a literature review of an inherent occurrence during root canal treatment.

    Science.gov (United States)

    Tanalp, J; Güngör, T

    2014-03-01

    Extrusion of intracanal debris as well as irrigants is a common occurrence during root canal treatment, and no instrument or technique has thoroughly solved this problem. Because flare-ups may arise with any irritation directed towards periapical tissues, a shaping or irrigation technique should minimize the risk of apical extrusion, even though it may not be prevented. There has been a rapid evolution of root canal instruments and irrigation systems through the last decade, and many have been assessed for their debris extrusion potential. The purpose of this review was to identify publications regarding the evaluation of debris, bacteria and irrigant extrusion during root canal treatment. A PubMed, Ovid and MEDLINE search was conducted using the keywords "apical extrusion", "debris extrusion" and "endodontic treatment". The literature search extended over a period of more than 30 years up to 2012. Content of the review was limited to apical extrusion of debris and irrigants, extrusion of liquid by irrigation methods and bacterial extrusion. Issues relevant to apical extrusion were obtained by further search in the reference sections of the retrieved articles. The review provides an update on the current status of apical extrusion. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  2. JSPS-CAS core university program seminar. Proceedings of Japan-China joint seminar on atomic and molecular processes in plasma

    International Nuclear Information System (INIS)

    Koike, Fumihiro; Dong Chenzhong

    2008-03-01

    As one of the activities of JSPS-CAS Core University Program, Japan-China Joint Seminar on Atomic and Molecular Processes in Plasma was held on October 8 - 12, 2007 in Dunhuang, China. The total number of the officially registered participants was 41, in which 12 from Japan, 25 from China, and 4 from EU. And this seminar is an extension of the last seminar that was held on March 6 - 11, 2004 in Lanzhou, China. In the nuclear fusion plasma, there are quite a variety of atomic processes such as ionization, excitation, radiative recombination, non-radiative recombination (di-electronic recombination, collisional electron transfer), cascade radiation, and cascade Auger decay over the wide range of plasma temperature. The knowledge of such processes is indispensable for the evaluation and improvement of the plasma properties, which is desirable to be investigated by international collaboration groups. The present seminar constitutes one of such activities to realize the above stated aim; especially it has given an opportunity for the collaborative workers to illustrate their achievements. The 32 of the presented papers are indexed individually. (J.P.N.)

  3. Proceedings of the Third APEC Coal Flow Seminar

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-26

    This proceedings includes papers presented at the Third APEC Coal Flow Seminar held at Terrigal, Australia in November, 1996. Keynote addresses, three sessions for discussions, and presentations by members economies are included. `Future investment requirements for coal in the APEC region,` `Barriers to investment across the APEC region coal chain,` `International commercial financier`s perspective on coal,` `The role of advanced coal technologies in greenhouse gas abatement and financing its development and uptake,` `Investment issues affecting the uptake of clean coal technology (CCT),` `Role of multilateral development banks in financing CCT to reduce greenhouse gas emissions,` and `Strategies for addressing regional coal issues` were presented as keynote addresses. In the sessions, investment issues facing coal power development, financing coal and investment, and investment strategies for CCT were discussed. 58 refs., 42 figs., 40 tabs.

  4. A brief review of extrusion-based tissue scaffold bio-printing.

    Science.gov (United States)

    Ning, Liqun; Chen, Xiongbiao

    2017-08-01

    Extrusion-based bio-printing has great potential as a technique for manipulating biomaterials and living cells to create three-dimensional (3D) scaffolds for damaged tissue repair and function restoration. Over the last two decades, advances in both engineering techniques and life sciences have evolved extrusion-based bio-printing from a simple technique to one able to create diverse tissue scaffolds from a wide range of biomaterials and cell types. However, the complexities associated with synthesis of materials for bio-printing and manipulation of multiple materials and cells in bio-printing pose many challenges for scaffold fabrication. This paper presents an overview of extrusion-based bio-printing for scaffold fabrication, focusing on the prior-printing considerations (such as scaffold design and materials/cell synthesis), working principles, comparison to other techniques, and to-date achievements. This paper also briefly reviews the recent development of strategies with regard to hydrogel synthesis, multi-materials/cells manipulation, and process-induced cell damage in extrusion-based bio-printing. The key issue and challenges for extrusion-based bio-printing are also identified and discussed along with recommendations for future, aimed at developing novel biomaterials and bio-printing systems, creating patterned vascular networks within scaffolds, and preserving the cell viability and functions in scaffold bio-printing. The address of these challenges will significantly enhance the capability of extrusion-based bio-printing. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Using a first-year seminar to introduce nursing.

    Science.gov (United States)

    Mennenga, Heidi A; Tschetter, Lois

    2013-01-01

    First-year seminar courses designed to aid the transition of freshmen students to the collegiate experience are commonplace requirements at many 4-year institutions. The authors describe the development, implementation, and outcomes of a first-year seminar course with introductory nursing content.

  6. Nordic seminar on energy taxes

    International Nuclear Information System (INIS)

    1991-01-01

    Taxes on energy contribute considerably to a State's income, it is stated. This form of taxation also influences the consumer prices of energy products significantly. Taxation is an important means of political control within the energy sector, it is also a powerful means of controlling a country's environmental policy. The seminar's aim was to study the theoretical background for energy taxation and to provide information on how the standard system for taxation has changed in the various Nordic countries, and the need for a renewal of energy taxation. Seven papers presented at the seminar are presented. (AB)

  7. Uranium industry seminar: proceedings

    International Nuclear Information System (INIS)

    1981-01-01

    The eleventh annual Uranium Industry Seminar, sponsored by the Grand Junction Area Office of the US Department of Energy (DOE), was held in Grand Junction, Colorado, on October 21 and 22, 1981. There were 491 registered attendees as compared to 700 attending the previous year. The attendees were largely from uranium and other energy resource companies, electric utility firms, energy consultants and service companies, and governmental agencies. In addition, there were representatives present from Indian tribes, universities, the media, DOE laboratories, and foreign countries and organizations. Papers presented at the seminar dealt with uranium policies, exploration, resources, supply, enrichment, and market conditions. There also were papers on the National Uranium Resource Evaluation Program and international activities. Thirteen papers included in this report have been abstracted and indexed

  8. Comparisons of microstructures and texture and mechanical properties of magnesium alloy fabricated by compound extrusion and direct extrusion

    Energy Technology Data Exchange (ETDEWEB)

    Hu, H.-J., E-mail: hhj@cqut.edu.cn [Chongqing University of Technology, Chongqing 400050 (China); PLA Chongqing Logistics Engineering College, 401311 (China); Ying, Y.-L. [Chongqing University of Technology, Chongqing 400050 (China); Ou, Z.-W. [PLA Chongqing Logistics Engineering College, 401311 (China); Wang, X.-Q. [The University of Alabama, Tuscaloosa, AL 35487 (United States)

    2017-05-17

    In this study, microstructure evolution, textures and mechanical properties of AZ61 magnesium alloy were investigated by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and tensile tests. The samples were processed by a new compound extrusion (CE) which combines direct extrusion (DE) and two steps of equal channel anger extrusion (ECAE). The results show that CE process can refine the microstructure more effectively than the DE process. The CE-fabricated samples have a weaker texture (0002), and a more fine and homogeneous microstructures, which attributes to the additional two steps of ECAE in CE process. In CE process, twin dynamic recrystallization and rotational dynamic recrystallization occurred, which enhances the refinement of the grains and weakening of the texture. In addition, the samples fabricated by CE process display a higher tensile properties (yield strength, tensile strength and elongation) with an excellent balance of strength and tensile ductility. Based on this study, severe plastic deformation (SPD) techniques combining conventional DE and two steps ECAE into a single process are feasibility to improve the mechanical properties of AZ61 Mg alloy.

  9. NKS/SOS-1 seminar on safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lauridsen, K. [Risoe National Lab., Roskilde (Denmark); Anderson, K. [Karinta-Konsult (Sweden); Pulkkinen, U. [VTT Automation (Finland)

    2001-05-01

    The report describes presentations and discussions at a seminar held at Risoe on March 22-23, 2000. The title of the seminar was NKS/SOS-1 - Safety Analysis. It dealt with issues of relevance for the safety analysis for the entire nuclear safety field (notably reactors and nuclear waste repositories). Such issues were: objectives of safety analysis, risk criteria, decision analysis, expert judgement and risk communication. In addition, one talk dealt with criteria for chemical industries in Europe. The seminar clearly showed that the concept of risk is multidimensional, which makes clarity and transparency essential elements in risk communication, and that there are issues of common concern between different applications, such as how to deal with different kinds of uncertainty and expert judgement. (au)

  10. Uranium industry seminar

    International Nuclear Information System (INIS)

    1980-01-01

    The tenth annual Uranium Industry Seminar, sponsored by the US Department of Energy's (DOE) Grand Junction Office, was held in Grand Junction, Colorado, on October 22 and 23, 1980. There were 700 registered attendees as compared to 833 attending the previous year. The attendees were drawn largely from uranium and other energy resource companies, electric utility firms, energy consultants and service companies, and governmental agencies. In addition, there were representatives present from Indian tribes, universities, the media, DOE laboratories, and foreign countries and organizations. There were 14 papers presented at the seminar by speakers from the Department of Energy, US Geological Survey, and Bendix Field Engineering Corporation which is the on-site prime contractor for DOE's Grand Junction Office. The topics the papers dealt with were uranium policies, exploration, respources, supply, enrichment, and market conditions. There also were papers describing the National Uranium Resource Evaluation program and international activities. All 14 papers in this Proceedings have been abstracted and indexed

  11. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsim ...

  12. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsi...

  13. DÉVELOPPEMENT D'UN OUTIL POLYMÈRE D'EXTRUSION UTILISÉ DANS UNE IMPRIMANTE 3D FDM

    OpenAIRE

    Leon-Medina , Jersson Xavier; Torres-Barahona , Edgar ,; Torres-Diaz , Edwin

    2013-01-01

    International audience; Rapid prototyping technology FDM manufactures a piece designed on the computer in real scale, through the use of technologies such as the extrusion of plastic layers and the positioning of a tool in three dimensions. The proposed methodology explains the process of design and construction of a polymer extruder tool, taking into account the variables necessary for the optimal response of a 3D printer in terms of printing time, surface finish and mechanical strength of t...

  14. Proceedings of Seminar on Emerging Environmental Issues in Pakistan

    International Nuclear Information System (INIS)

    Dhami, M.S.I.; Anees, S.

    1999-01-01

    The seminar on emerging environmental issues in Pakistan was held from December 5-7, 1998, in Islamabad, Pakistan. The nature and magnitude of environmental contamination, and who is exposed to it, depend not only on scientific and technological factors but also reflect economic, political, social and many other influences. In the process of creating social and economic benefits to society, industrial production generates hazardous waste and chemical contaminants that impact negatively on quality of life. The main emphases in this proceedings are on different type pollution and their impacts on humane life. (A.B.)

  15. Cell Extrusion: A Stress-Responsive Force for Good or Evil in Epithelial Homeostasis.

    Science.gov (United States)

    Ohsawa, Shizue; Vaughen, John; Igaki, Tatsushi

    2018-02-05

    Epithelial tissues robustly respond to internal and external stressors via dynamic cellular rearrangements. Cell extrusion acts as a key regulator of epithelial homeostasis by removing apoptotic cells, orchestrating morphogenesis, and mediating competitive cellular battles during tumorigenesis. Here, we delineate the diverse functions of cell extrusion during development and disease. We emphasize the expanding role for apoptotic cell extrusion in exerting morphogenetic forces, as well as the strong intersection of cell extrusion with cell competition, a homeostatic mechanism that eliminates aberrant or unfit cells. While cell competition and extrusion can exert potent, tumor-suppressive effects, dysregulation of either critical homeostatic program can fuel cancer progression. Copyright © 2018 Elsevier Inc. All rights reserved.

  16. Learning from the Past: Implications for the Future Internet and its Management? (Dagstuhl Seminar 11042)

    NARCIS (Netherlands)

    Dreo Rodosek, Gabi; Pras, Aiko; Schulzrinne, Henning; Stiller, Burkhard

    This report documents the program and the outcomes of Dagstuhl Seminar 11042 “Learning from the Past: Implications for the Future Internet and its Management?‿. The discussion centered around the question if by analyzing the past - especially why certain technologies did or did not succeed - it is

  17. Seminar on waste treatment and disposal; Seminar po obrashcheniyu s otkhodami i ikh utilizatsii

    Energy Technology Data Exchange (ETDEWEB)

    Sneve, Malgorzata Karpow; Snihs, Jan Olof

    1999-07-01

    A seminar on radioactive waste treatment and disposal was held 9 - 14 November 1998 in Oskarshamn, Sweden. The objective of the seminar was to exchange information on national and international procedures, practices and requirements for waste management. This information exchange was intended to promote the development of a suitable strategy for management of radioactive waste in Northwest Russia to be used as background for future co-operation in the region. The seminar focused on (1) overviews of international co-operation in the waste management field and national systems for waste management, (2) experiences from treatment of low- and intermediate-level radioactive waste, (3) the process of determining the options for final disposal of radioactive waste, (4) experiences from performance assessments and safety analysis for repositories intended for low- and intermediate level radioactive waste, (5) safety of storage and disposal of high-level waste. The seminar was jointly organised and sponsored by the Swedish Radiation Protection Institute (SSI), the Norwegian Radiation Protection Authority (NRPA), the Nordic Nuclear Safety Research (NKS) and the European Commission. In brief, the main conclusions are: (1) It is the prerogative of the Russian federal Government to devise and implement a waste management strategy without having to pay attention to the recommendations of the meeting, (2) Some participants consider that many points have already been covered in existing governmental documents, (3) Norway and Sweden would like to see a strategic plan in order to identify how and where to co-operate best, (4) There is a rigorous structure of laws in place, based on over-arching environmental laws, (5) Decommissioning of submarines is a long and complicated task, (6) There are funds and a desire for continued Norway/Sweden/Russia co-operation, (7) Good co-operation is already taking place.

  18. Scientists for non-proliferation of nuclear weapons. Transactions of international seminar

    International Nuclear Information System (INIS)

    1994-01-01

    This publication presents the results of the Second International Seminar 'Scientists for Non-Proliferation of Nuclear Weapons'. The Seminar took place from 11 to 14 October 1994 in Nakhabino Country Club near Moscow. More than 60 specialists from Russia, USA, France, Belgium as well as IAEA and CEU took part in the seminar. Problems of cooperation in the field of nuclear materials accounting, control and safeguards, physical protection of nuclear materials, nuclear export regulations and disarmament control are discussed at the seminar

  19. A Covering Type Extrusion Die with Twin Cavities for Semi-Hollow Al-Profiles

    Science.gov (United States)

    Deng, Rurong; Huang, Xuemei

    2018-03-01

    A new structure named covering type with twin cavities in a die for the semi-hollow aluminum profiles was present. The determination of structure parameters was introduced in detail. Mainly including the selection of the machine, the arrangement of portholes, the structure design of chamber and the selection of bearing. The method of checking the die strength was introduced. According to the extrusion results, the structure of the traditional solid die, the porthole die with single cavity and the covering type structure with twin cavities were compared. The characteristics of the latter structure were simple and easy to process. The practical application shows that the new die structure can enhance the die life, improve the production efficiency and reduce the cost. The high precision and the surface brightness of the profiles were obtained. The structure is worth promoting. The aim is to provide reliable data and reference for the further research and development of this technology on the extrusion die with multi-cavities in a die.

  20. Evaluating online continuing medical education seminars: evidence for improving clinical practices.

    Science.gov (United States)

    Weston, Christine M; Sciamanna, Christopher N; Nash, David B

    2008-01-01

    The purpose of this study was to evaluate the potential for online continuing medical education (CME) seminars to improve quality of care. Primary care physicians (113) participated in a randomized controlled trial to evaluate an online CME series. Physicians were randomized to view either a seminar about type 2 diabetes or a seminar about systolic heart failure. Following the seminar, physicians were presented with 4 clinical vignettes and asked to describe what tests, treatments, counseling, or referrals they would recommend. Physicians who viewed the seminars were significantly more likely to recommend guideline-consistent care to patients in the vignettes. For example, physicians who viewed the diabetes seminar were significantly more likely to order an eye exam for diabetes patients (63%) compared with physicians in the control group (27%). For some guidelines there were no group differences. These results provide early evidence of the effectiveness of online CME programs to improve physician clinical practice.

  1. YoungRad-seminar. Proceedings. Seminar for young scientists in the fields of radiophysics, radiochemistry, radioecology, radiation protection and related fields

    International Nuclear Information System (INIS)

    Straelberg, E.; Sidhu, R.; Petersen, R.; Salminen, S.

    2007-09-01

    To provide an inspiring working environment for young students and scientists, it is important that they at an early stage can take part in a network of scientists working in their fields of interest. However, within each of the five Nordic countries the network of people involved in the fields of radiophysics, radiochemistry, radioecology, radiation protection and other related fields is rather small. Educational networking is a key factor in keeping young researchers motivated to continue working within these fields, and to recruit new students. For that reason the first YoungRad-seminar was held in Helsinki 14-15 December 2006. 43 young participants including MSc and PhD students at universities, researchers at different institutes and personnel from Nordic authorities took part in the seminar. All Nordic countries except Iceland were represented. The seminar was divided into four sessions including oral and poster presentations. In addition two senior researchers were invited to speak about Nordic radioecology and NKS. This report contains the abstracts and presentations made at the seminar. (au)

  2. YoungRad-seminar. Proceedings. Seminar for young scientists in the fields of radiophysics, radiochemistry, radioecology, radiation protection and related fields

    Energy Technology Data Exchange (ETDEWEB)

    Straelberg, E; Sidhu, R [Institute for Energy Technology (Norway); Petersen, R [Technological Univ. of Denmark (Denmark); Salminen, S [Univ. of Helsinki (Finland)

    2007-09-15

    To provide an inspiring working environment for young students and scientists, it is important that they at an early stage can take part in a network of scientists working in their fields of interest. However, within each of the five Nordic countries the network of people involved in the fields of radiophysics, radiochemistry, radioecology, radiation protection and other related fields is rather small. Educational networking is a key factor in keeping young researchers motivated to continue working within these fields, and to recruit new students. For that reason the first YoungRad-seminar was held in Helsinki 14-15 December 2006. 43 young participants including MSc and PhD students at universities, researchers at different institutes and personnel from Nordic authorities took part in the seminar. All Nordic countries except Iceland were represented. The seminar was divided into four sessions including oral and poster presentations. In addition two senior researchers were invited to speak about Nordic radioecology and NKS. This report contains the abstracts and presentations made at the seminar. (au)

  3. Functionally graded scaffolds for the engineering of interface tissues using hybrid twin screw extrusion/electrospinning technology

    Science.gov (United States)

    Erisken, Cevat

    Tissue engineering is the application of the principles of engineering and life sciences for the development of biological alternatives for improvement or regeneration of native tissues. Native tissues are complex structures with functions and properties changing spatially and temporally, and engineering of such structures requires functionally graded scaffolds with composition and properties changing systematically along various directions. Utilization of a new hybrid technology integrating the controlled feeding, compounding, dispersion, deaeration, and pressurization capabilities of extrusion process with electrospinning allows incorporation of liquids and solid particles/nanoparticles into polymeric fibers/nanofibers for fabrication of functionally graded non-woven meshes to be used as scaffolds in engineering of tissues. The capabilities of the hybrid technology were demonstrated with a series of scaffold fabrication and cell culturing studies along with characterization of biomechanical properties. In the first study, the hybrid technology was employed to generate concentration gradations of beta-tricalcium phosphate (beta-TCP) nanoparticles in a polycaprolactone (PCL) binder, between two surfaces of nanofibrous scaffolds. These scaffolds were seeded with pre-osteoblastic cell line (MC3T3-E1) to attempt to engineer cartilage-bone interface, and after four weeks, the tissue constructs revealed formation of continuous gradations in extracellular matrix akin to cartilage-bone interface in terms of distributions of mineral concentrations and biomechanical properties. In a second demonstration of the hybrid technology, graded differentiation of stem cells was attempted by using insulin, a known stimulator of chondrogenic differentiation, and beta-glycerol phosphate (beta-GP), for mineralization. Concentrations of insulin and beta-GP in PCL were controlled to monotonically increase and decrease, respectively, along the length of scaffolds, which were then seeded

  4. Proceedings of the 1989 seminar on nuclear data

    International Nuclear Information System (INIS)

    Nakajima, Yutaka; Igashira, Masayuki

    1990-02-01

    The 1989 Seminar no Nuclear Data was held at Tokai Research Establishment of Japan Atomic Energy Research Institute, on November 16 and 17, 1989. This Seminar was organized by Japanese Nuclear Data Committee (JNDC) and Nuclear Data Center, JAERI. In an oral session, review and benchmark tests of JENDL-3 were presented, which were followed by lively discussion. Data need of other nuclear data than neutron induced reaction data were also presented. In addition, several topical talks were given. In a poster session, twenty papers on evaluation and measurement was presented and fruitful discussions were made. In this proceedings, thirty-four papers given in the seminar are compiled. (author)

  5. The methodological seminar “Psychological Safety in Transport”

    Directory of Open Access Journals (Sweden)

    Sviridenko I.N.

    2018-03-01

    Full Text Available This paper provides a short brief overview of the methodological seminar “Psychological Safety in Transport” organized in Yekaterinburg on the 17th November 2017. This seminar consisted of the plenary session and four workshops focused on analyzing most important issues of Human Factor of Road Safety.

  6. Reduction of cyanogenic glycosides by extrusion - influence of temperature and moisture content of the processed material

    Directory of Open Access Journals (Sweden)

    Čolović Dušica S.

    2015-01-01

    Full Text Available Тhe paper presents results of the investigation of the influence of extrusion temperature and moisture content of treated material on the reduction of cyanogenic glycosides (CGs in linseed-based co-extrudate. CGs are the major limitation of the effective usage of linseed in animal nutrition. Hence, some technological process must be applied for detoxification of linseed before its application as a nutrient. Extrusion process has demonstrated several advantages in reducing the present CGs, since it combines the influences of heating, shearing, high pressure, mixing, etc. According to obtained results, the increase in both temperature and moisture content of the starting mixture decreased the content of CGs in the processed material. HCN content, as a measurement of GCs presence, ranged from 25.42 mg/kg, recorded at the moisture content of 11.5%, to 126 mg/kg, detected at the lowest moisture content of 7%. It seems that moisture content and temperature had the impact on HCN content of equal importance. However, the influence of extrusion parameters other than temperature and moisture content could not be neglected. Therefore, the impact of individual factors has to be tested together. [Projekat Ministarstva nauke Republike Srbije, br. III 46012

  7. Instant blend from cassava derivatives produced by extrusion

    OpenAIRE

    Trombini, Fernanda Rossi Moretti; Mischan, Martha Maria; Leonel, Magali

    2016-01-01

    ABSTRACT: The current research aimed to evaluate the effects of extrusion parameters on the physical characteristics of extruded blends of cassava leaf flour and starch. A factorial central composite design with four independent variables and the response surface methodology were used to evaluate the results of color parameters (L*, a*, b*), water absorption index, water solubility index and paste properties, according to the variations in the leaf flour percentage (1.5 to 7.5%), extrusion te...

  8. Rapid Continuous Multimaterial Extrusion Bioprinting

    NARCIS (Netherlands)

    Liu, Wanjun; Zhang, Yu Shrike; Heinrich, Marcel A.; De Ferrari, F; Jang, HL; Bakht, SM; Alvarez, MM; Yang, J; Li, YC; Trujillo-de Stantiago, G; Miri, AK; Zhu, K; Khoshakhlagh, P; Prakash, G; Cheng, H; Guan, X; Zhong, Z; Ju, J; Zhu, GH; Jin, X; Ryon Shin, Su; Dokmeci, M.R.; Khademhosseini, Ali

    The development of a multimaterial extrusion bioprinting platform is reported. This platform is capable of depositing multiple coded bioinks in a continuous manner with fast and smooth switching among different reservoirs for rapid fabrication of complex constructs, through digitally controlled

  9. PREFACE: Eurotherm Seminar 102: Thermal Management of Electronic Systems

    Science.gov (United States)

    Punch, J.; Walsh, E.

    2014-07-01

    About EUROTHERM The aim of the EUROTHERM Committee (www.eurothermcommittee.eu) is to promote and foster European cooperation in Thermal Sciences and Heat Transfer by gathering together scientists and engineers working in specialized areas. The Committee consists of members representing and appointed by national bodies in the EU countries. The current President of EUROTHERM is Professor Anton van Steenhoven from the University of Eindhoven (The Netherlands). The Committee organizes and coordinates European scientific events such as the EUROTHERM Seminars (about 4 per year) and the European Thermal Sciences Conference (every 4 years). About EUROTHERM Seminar 102 (www.eurothermseminar102.com) This seminar, part of the long-running series of European seminars on the thermal sciences, took place in June 2014 at the University of Limerick in Limerick, Ireland. The seminar addressed the topic of 'Thermal Management of Electronic Systems', a critical contemporary application area which represents a vibrant challenge for practitioners of the thermal sciences. We convey special thanks to the reviewers who have evaluated these papers. We also thank the scientific committee, consisting of internationally recognized experts. Their role has been to manage the evaluation of abstracts and the papers selection process as co-coordinators for specific topics. This seminar was hosted by the Stokes Institute at the University of Limerick. It could not have been organized without the efficient help of our administrators and technicians for IT support. This volume of Journal of Physics: Conference Series includes 27 articles presented at the seminar. Dr. Jeff Punch, Chair Stokes Institute, University of Limerick, Limerick, Ireland Email: jeff.punch@ul.ie Prof. Edmond Walsh, Co-Chair Associate Professor, Osney Laboratories, Department of Engineering Science, University of Oxford, UK Email: edmond.walsh@bnc.ox.ac.uk

  10. REFINEMENT OF THE REVERSE EXTRUSION TEST TO DETERMINE THE TWO CONSISTENCY LIMITS

    Directory of Open Access Journals (Sweden)

    Kamil KAYABALI

    2015-11-01

    Full Text Available Liquid limit (LL and plastic limit (PL are the two most commonly used index proper- ties of fine-grained soils. They have been used in not only classification of soils but also in correlation with certain engineering properties. Therefore, they have been subjected to numerous researches since they were first introduced by Atterberg in 1911. While their me- chanisms were well defined in many codes and they have been in use for decades, criticisms often arose pertinent to the uncertainties inherent to them. Incredible amount of effort has been exerted to invent more rational testing methods in place of both the Casagrande’s cup and bead rolling methods. Part of those efforts has been on devicing a single tool to measure the two relative index properties together. Recently, the reverse extrusion test was brought into the use of geotechnical engineers. It was shown that this tool has a potential of measu- ring LL, PL, and even the shrinkage limit (SL. The aim of this investigation is to reassess the ability of the reverse extrusion test to determine LL and PL with further refinement. In this regard 70 fine-grained soils covering a large range of plasticity were employed. Fall-cone method and rolling-device method were employed to determine LL and PL, res- pectively. The reverse extrusion tests were carried out at least five different water contents per soil sample. Extrusion pressures were plotted against water content and a curve fitting was applied to data pairs, from which the y-intercept (the coefficient a and the slope (the coefficieent b of the curve were determined. Those reverse extrusion coefficients were utilized to determine the representative extrusion pressures corresponding to LL and PL, as was done by the earlier researchers; however, the degree of success for the prediction of LL and PL using the representative extrusion pressures was not encouraging. Different from the previously proposed approaches, the reverse extrusion

  11. Radiation protection seminar

    International Nuclear Information System (INIS)

    2012-01-01

    The Radiation Protection Seminar, was organized by the Argentina Association of Biology and Nuclear Medicine, and Bacon Laboratory, the 20 june 2012, in the Buenos Aires city of Argentina. In this event were presented some papers on the following topics: methods of decontamination, radiation protection of patients; concepts of radiation protection and dosimetry.

  12. Seminar on setting up your own business

    CERN Multimedia

    DSU Department

    2008-01-01

    Organised by the French-Swiss Foundation for Research and Technology (FFRST), in partnership with CERN, and open to all CERN personnel: Friday 7 March 2008, from 9.00 a.m. to 4.00 p.m. in the Globe of Science and Innovation Are you interested in setting up your own business? Have you already taken any steps in that direction? Do you wish to develop a business plan based on your own professional expertise? If so, you are cordially invited to take part in this seminar, at which you will have the opportunity to: hear first-hand accounts from former members of the CERN personnel who have become entrepreneurs and talk about their experience and needs in terms of financial support, find out about the possibilities for obtaining support at the national level (in Switzerland and France) through presentations of the CTI Start-up and OSEO programmes, have discussions with the relevant Swiss and French regional authorities responsible for supporting start-ups in innovative technolog...

  13. Seminar on setting up your own business

    CERN Multimedia

    DSU Department

    2008-01-01

    Organised by the French-Swiss Foundation for Research and Technology (FFRST), in partnership with CERN, and open to all CERN personnel: Friday 7 March 2008, from 9.00 a.m. to 4.00 p.m. in the Globe of Science and Innovation Are you interested in setting up your own business? Have you already taken any steps in that direction? Do you wish to develop a business plan based on your own professional expertise? If so, then you are cordially invited to take part in this seminar at which you will have the opportunity to: hear first-hand accounts from former members of the CERN personnel who have become entrepreneurs and talk about their experience and needs in terms of financial support, find out about the possibilities of obtaining support at national level (in Switzerland and France) through presentations of the CTI Start-up and OSEO programmes, have discussions with the relevant Swiss and French regional authorities responsible for supporting start-ups in innovative technologies...

  14. 75 FR 69403 - Aluminum Extrusions From the People's Republic of China: Notice of Preliminary Determination of...

    Science.gov (United States)

    2010-11-12

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-570-967] Aluminum Extrusions From the... Commerce (``Department'') preliminarily determines that aluminum extrusions from the People's Republic of... of aluminum extrusions from the PRC filed in proper form by the Aluminum Extrusions Fair Trade...

  15. PROGRAMME OF SEMINARS MARCH TO JUNE 2004

    CERN Multimedia

    Nathalie Dumeaux

    2004-01-01

    Situation : 09.03.2004 Dates Days Places Available* Bilingual seminars Communication Techniques-1 16, 17, 18 March 3 no Project Management 17, 18, 19 March 3 yes Introduction to Management 23, 24, 25 March 3 yes Communication Techniques-1 8, 9, 10 June 3 yes Quality Management 5, 6, 7 may 3 yes Introduction to Management - Follow-up 22, 23 June 1,5 yes Seminars in English Making Presentations 22, 23 March & 1 April 3 yes Stress Management 22, 23 April 2 yes Chairing or participating in meetings 11, 12, 13 May 3 yes *If you are interested in a seminar where there are no places available, please fill in an application form and we will contact you as soon as a new session is organised. MANAGEMENT & COMMUNICATION Nathalie Dumeaux tel. 781 44 management.communication@cern.ch

  16. NKS/SOS-1 Seminar on Safety analysis. Report from a seminar held on 22-23 March 2000 Risø National Laboratory, Roskilde, DK

    DEFF Research Database (Denmark)

    The report describes presentations and discussions at a seminar held at Risø on March 22-23, 2000. The title of the seminar was NKS/SOS-1 – Safety Analysis. It dealt with issues of relevance for the safety analysis for the entire nuclear safety field (notably reactors and nuclear waste repositories......). Such issues were: objectives of safety analysis, risk criteria, decision analysis, expert judgement and risk communication. In addition, one talk dealt with criteria for chemical industries in Europe. The seminar clearly showed that the concept of risk is multi-dimensional, which makes clarity...

  17. Sustainable roadway lighting seminar.

    Science.gov (United States)

    2014-07-01

    The objective of this project was to develop and conduct a half-day educational seminar on sustainable : roadway lighting at three locations within New York State: Rochester, New York City, and Albany. : Primary attendees were engineers from the New ...

  18. Exploring Biology: A "Vision and Change" Disciplinary First-Year Seminar Improves Academic Performance in Introductory Biology

    Science.gov (United States)

    Wienhold, Caroline J.; Branchaw, Janet

    2018-01-01

    The transition to college is challenging for most students, especially those who aspire to major in the science, technology, engineering, or mathematics disciplines, in which introductory courses can be large and instruction less than optimal. This paper describes a novel, disciplinary first-year seminar (FYS) course, Exploring Biology, designed…

  19. 75 FR 57441 - Aluminum Extrusions From the People's Republic of China: Alignment of Final Countervailing Duty...

    Science.gov (United States)

    2010-09-21

    ... DEPARTMENT OF COMMERCE International Trade Administration [C-570-968] Aluminum Extrusions From the... countervailing duty investigation of aluminum extrusions from the People's Republic of China (PRC) with the final... antidumping duty investigations on aluminum extrusions from the PRC. See Aluminum Extrusions from the People's...

  20. Organizing a Campus Seminar on Careers in Entertainment.

    Science.gov (United States)

    Walt Disney Productions, Anaheim, CA.

    Developed by Walt Disney Productions as part of a project granted by the Career Education Program of the Office of Education, this handbook is designed to help college and university fine arts departments in planning and carrying out an on-campus seminar on careers in entertainment. Sections include Why Hold a Seminar on Careers in Entertainment?,…

  1. Microcapsules loaded with the probiotic Lactobacillus paracasei BGP-1 produced by co-extrusion technology using alginate/shellac as wall material: Characterization and evaluation of drying processes.

    Science.gov (United States)

    Silva, Marluci P; Tulini, Fabricio L; Ribas, Marcela M; Penning, Manfred; Fávaro-Trindade, Carmen S; Poncelet, Denis

    2016-11-01

    Microcapsules containing Lactobacillus paracasei BGP-1 were produced by co-extrusion technology using alginate and alginate-shellac blend as wall materials. Sunflower oil and coconut fat were used as vehicles to incorporate BGP-1 into the microcapsules. The microcapsules were evaluated with regard the particle size, morphology, water activity and survival of probiotics after 60days of storage at room temperature. Fluidized bed and lyophilization were used to dry the microcapsules and the effect of these processes on probiotic viability was also evaluated. Next, dried microcapsules were exposed to simulated gastrointestinal fluids to verify the survival of BGP-1. Microcapsules dried by fluidized bed had spherical shape and robust structures, whereas lyophilized microcapsules had porous and fragile structures. Dried microcapsules presented a medium size of 0.71-0.86mm and a w ranging from 0.14 to 0.36, depending on the drying process. When comparing the effects of drying processes on BGP-1 viability, the fluidized bed was less aggressive than lyophilization. The alginate-shellac blend combined with coconut fat as core effectively protected the encapsulated probiotic under simulated gastrointestinal conditions. Thus, the production of microcapsules by co-extrusion followed by drying using the fluidized bed is a promising strategy for protection of probiotic cells. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Seminar on gamma-gamma physics

    International Nuclear Information System (INIS)

    1984-04-01

    The following subjects have been studied in this seminar: photon pair production, hard scattering processes in photon-photon and electron-photon collisions, radiative corrections, final state interactions

  3. Numerical studies of temperature effect on the extrusion fracture and swell of plastic micro-pipe

    Science.gov (United States)

    Ren, Zhong; Huang, Xingyuan; Xiong, Zhihua

    2018-03-01

    Temperature is a key factor that impacts extrusion forming quality of plastic micro-pipe. In this study, the effect of temperature on extrusion fracture and swell of plastic micro-pipe was investigated by numerical method. Under a certain of the melt’s flow volume, the extrusion pattern, extrusion swelling ratio of melt are obtained under different temperatures. Results show that the extrusion swelling ratio of plastic micro-pipe decreases with increasing of temperature. In order to study the reason of temperature effect, the physical distributions of plastic micro-pipe are gotten. Numerical results show that the viscosity, pressure, stress value of melt are all decreased with the increasing of temperature, which leads to decrease the extrusion swell and fracture phenomenon for the plastic micro-pipe.

  4. Report on Seminar on Clean Coal Technology '93; Clean coal technology kokusai seminar hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-11-01

    The program of the above clean coal technology (CCT) event is composed of 1) Coal energy be friendly toward the earth, 2) Research on CCT in America (study of coal structure under electron microscope), and 3) Research on CCT in Australia (high intensity combustion of ultrafine coal particles in a clean way). Remarks under item 1) are mentioned below. As for SO{sub 2} emissions base unit, Japan's is 1 at its coal-fired thermal power station while that of America is 7.8. As for the level of SO{sub 2}/NOx reduction attributable to coal utilization technologies, it rises in the order of flue gas desulfurizer-aided pulverized coal combustion, normal pressure fluidized bed combustion, pressurized fluidized bed combustion, integrated coal gasification combined cycle power generation, and integrated coal gasification combined cycle power generation/fuel cell. As for the level of CO2 reduction attributable to power generation efficiency improvement, provided that Japan's average power generation efficiency is 39% and if China's efficiency which is now 28% is improved to be similar to that of Japan, there will be a 40% reduction in CO2 emissions. Under item 2) which involves America's CCT program, reference is made to efforts at eliminating unnecessary part from the catalytic process and at reducing surplus air, to the export of CCT technology, and so forth. Under item 3), it is stated that coal cleaning may govern reaction efficiency in a process of burning coal particles for gasification. (NEDO)

  5. Preface to 18. Chemnitz seminar on materials engineering

    International Nuclear Information System (INIS)

    2016-01-01

    The Institute of Materials Science and Engineering (Institut für Werkstoffwissenschaft und Werkstofftechnik, IWW) is a well-established part of the Faculty of Mechanical Engineering at Technische Universität Chemnitz, Germany. We are proud to host our traditional scientific meeting, the Chemnitz Seminar on Materials Engineering - Werkstofftechnisches Kolloquium, this year being the 18 th Seminar. The aim of our meeting is to bring together scientists and engineers both from academia and industry, and this is reflected by the different scientific sessions that cover various relevant topics, such as composite materials, microstructural analysis, and surface engineering. Special focus sessions highlight recent developments in the Federal Cluster of Excellence MERGE and in the Collaborative Research Center SFB 692, both established in Chemnitz. We, as organizers, continuously strive to improve our Seminar, and we therefore decided to provide all contributors with the opportunity to publish their papers, in addition to the printed Proceedings volume, in an international, peer-reviewed journal. Publication in IOP Conference Series: Materials Science and Engineering allows for a wide dissemination of the many interesting and relevant results presented in our Seminar. Clearly, this is understood and appreciated by many participants of our meeting: more than 65% of all authors chose to also publish their Proceedings papers in this special issue, which consequently provides an excellent overview of the main topics of our Seminar. Chemnitz, March 2016 Prof. Thomas Lampke Prof. Guntram Wagner Prof. Martin F.-X. Wagner (paper)

  6. 76 FR 30650 - Aluminum Extrusions from the People's Republic of China: Antidumping Duty Order

    Science.gov (United States)

    2011-05-26

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-570-967] Aluminum Extrusions from the...''), the Department is issuing an antidumping duty order on aluminum extrusions from the People's Republic... of material injury by reason of imports of certain aluminum extrusions from the PRC, and its negative...

  7. Extrusion conditions affect chemical composition and in vitro digestion of select food ingredients.

    Science.gov (United States)

    Dust, Jolene M; Gajda, Angela M; Flickinger, Elizabeth A; Burkhalter, Toni M; Merchen, Neal R; Fahey, George C

    2004-05-19

    An experiment was conducted to determine the effects of extrusion conditions on chemical composition and in vitro hydrolytic and fermentative digestion of barley grits, cornmeal, oat bran, soybean flour, soybean hulls, and wheat bran. Extrusion conditions altered crude protein, fiber, and starch concentrations of ingredients. Organic matter disappearance (OMD) increased for extruded versus unprocessed samples of barley grits, cornmeal, and soybean flour that had been hydrolytically digested. After 8 h of fermentative digestion, OMD decreased as extrusion conditions intensified for barley grits and cornmeal but increased for oat bran, soybean hulls, and wheat bran. Total short-chain fatty acid production decreased as extrusion conditions intensified for barley grits, soybean hulls, and soybean flour. These data suggest that the effects of extrusion conditions on ingredient composition and digestion are influenced by the unique chemical characteristics of individual substrates.

  8. Eddy current seminar

    International Nuclear Information System (INIS)

    Emson, C.R.I.

    1988-11-01

    The paper presents the fifth symposium in the series of Eddy Current Seminars, held in Abingdon, 1988. The meeting included a discussion on three-dimensional eddy current formulations, as well as thirteen contributed papers on computational electromagnetics. Of the thirteen papers, two papers on eddy currents in tokamaks were selected for INIS and indexed separately. (U.K.)

  9. Hot-melt extrusion of sugar-starch-pellets.

    Science.gov (United States)

    Yeung, Chi-Wah; Rein, Hubert

    2015-09-30

    Sugar-starch-pellets (syn. sugar spheres) are usually manufactured through fluidized bed granulation or wet extrusion techniques. This paper introduces hot-melt extrusion (HME) as an alternative method to manufacture sugar-starch-pellets. A twin-screw extruder coupled with a Leistritz Micro Pelletizer (LMP) cutting machine was utilized for the extrusion of different types (normal-, waxy-, and high-amlyose) of corn starch, blended with varying amounts of sucrose. Pellets were characterized for their physicochemical properties including crystallinity, particle size distribution, tensile strength, and swelling expansion. Furthermore, the influence of sugar content and humidity on the product was investigated. Both sucrose and water lowered the Tg of the starch system allowing a convenient extrusion process. Mechanical strength and swelling behavior could be associated with varying amylose and amylopectin. X-ray powder diffractometric (XRPD) peaks of increasing sucrose contents appeared above 30%. This signified the oversaturation of the extruded starch matrix system with sucrose. Otherwise, had the dissolved sucrose been embedded into the molten starch matrix, no crystalline peak could have been recognized. The replacement of starch with sucrose reduced the starch pellets' swelling effect, which resulted in less sectional expansion (SEI) and changed the surface appearance. Further, a nearly equal tensile strength could be detected for sugar spheres with more than 40% sucrose. This observation stands in good relation with the analyzed values of the commercial pellets. Both techniques (fluidized bed and HME) allowed a high yield of spherical pellets (less friability) for further layering processes. Thermal influence on the sugar-starch system is still an obstacle to be controlled. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Bioavailability enhancement of atovaquone using hot melt extrusion technology.

    Science.gov (United States)

    Kate, Laxman; Gokarna, Vinod; Borhade, Vivek; Prabhu, Priyanka; Deshpande, Vinita; Pathak, Sulabha; Sharma, Shobhona; Patravale, Vandana

    2016-04-30

    Emerging parasite resistance and poor oral bioavailability of anti-malarials are the two cardinal issues which hinder the clinical success of malaria chemotherapy. Atovaquone-Proguanil is a WHO approved fixed dose combination used to tackle the problem of emerging resistance. However, Atovaquone is a highly lipophilic drug having poor aqueous solubility (less than 0.2 μg/ml) thus reducing its oral bioavailability. The aim of the present investigation was to explore hot melt extrusion (HME) as a solvent-free technique to enhance solubility and oral bioavailability of Atovaquone and to develop an oral dosage form for Atovaquone-Proguanil combination. Solid dispersion of Atovaquone was successfully developed using HME. The solid dispersion was characterized for DSC, FTIR, XRD, SEM, and flow properties. It was filled in size 2 hard gelatin capsules. The formulation showed better release as compared to Malarone® tablets, and 3.2-fold and 4.6-fold higher bioavailability as compared to Malarone® tablets and Atovaquone respectively. The enhanced bioavailability also resulted in 100% anti-malarial activity in murine infection model at 1/8(th) therapeutic dose. Thus the developed methodology shows promising potential to solve the problems associated with Atovaquone therapy, namely its high cost and poor oral bioavailability, resulting in increased therapeutic efficacy of Atovaquone. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Report from Dagstuhl Seminar 12331 Mobility Data Mining and Privacy

    OpenAIRE

    Clifton, Christopher W.; Kuijpers, Bart; Morik, Katharina; Saygin, Yucel

    2012-01-01

    This report documents the program and the outcomes of Dagstuhl Seminar 12331 “Mobility Data Mining and Privacy”. Mobility data mining aims to extract knowledge from movement behaviour of people, but this data also poses novel privacy risks. This seminar gathered a multidisciplinary team for a conversation on how to balance the value in mining mobility data with privacy issues. The seminar focused on four key issues: Privacy in vehicular data, in cellular data, context- dependent privacy, and ...

  12. 1985 seminar on power plant digital control and fault-tolerant microcomputers: proceedings

    International Nuclear Information System (INIS)

    Divakaruni, S.M.

    1986-09-01

    An EPRI Seminar to address Power Plant Digital Controls and Fault-Tolerant Microcomputers Technology was hosted by Arizona Public Service Company in Phoenix, Arizona on April 9-12, 1986. The attendees represented a broad spectrum of US and foreign utilities, architect and consulting firms, and NSSS and computer system hardware vendors. These proceedings contain the text of the formal presentations as well as the papers and slides used during the short courses offered

  13. FEM analysis of hollow hub forming in rolling extrusion process

    Directory of Open Access Journals (Sweden)

    J. Bartnicki

    2014-10-01

    Full Text Available In this paper are presented the results of numerical calculations of rolling extrusion process of a hollow hub. As the flanges manufacturing at both sides of the product is required, in the analyzed process of rolling extrusion, a rear bumper was implemented as additional tool limiting axial metal flow. Numerical calculations of the hub forming process were conducted basing on finite element method, applying software Deform3D and Simufact in conditions of three dimensional state of strain. The obtained satisfactory results show that it is possible to conduct the further research works of experimental character, with the application of a modernized aggregate for the rolling extrusion process PO-2.

  14. NKS/SOS-1 seminar on quality assurance

    International Nuclear Information System (INIS)

    Hammar, L.; Wahlstroem, B.

    2001-02-01

    The backgrounds and the conduct of the seminar is described. Summaries are given of all presentations and slides shown are appended. An account is given of discussions on different quality issues which were conducted during the seminar in separate groups. Concluding remarks made by the Chairman of NKS are reproduced. Further conclusions will be presented in the main report from the project 'Views on quality assurance at Finnish and Swedish nuclear power plants and the Halden reactor'. (au)

  15. FOREWORD: CCM Second International Seminar: Pressure Metrology from 1 kPa to 1 GPa

    Science.gov (United States)

    Molinar, G. F.

    1994-01-01

    The Comité Consultatif pour la Masse et les Grandeurs Apparentées (CCM), through its High Pressure and Medium Pressure Working Groups, organized this Second International Seminar on Pressure Metrology from 1 kPa to 1 GPa, which was held at the Laboratoire National d'Essais (LNE), Paris, France, from 2 to 4 June 1993. The scope of the seminar was to review the state of the art of pressure measurements in the 1 kPa to I GPa pressure range and to present innovative contributions by standards laboratories, universities and industry. The seminar was organized in six sessions: liquid-column manometers; piston gauge pressure standards; properties of liquids and gases relevant to pressure metrology; pressure transducers and transfer standards; pressure standard comparison (methods and results); dynamic pressure measurements. Each session opened with the presentation of a review paper on major requirements in that field and, at the end of the seminar, a general discussion was organized on the actual limits of accuracy of static and dynamic pressure measurements in fluid media, and the fundamental problems in pressure metrology between 1 kPa and 1 GPa. The seminar was attended by sixty scientists from twenty-four countries, all working in the field of pressure measurements. Forty-nine papers were presented. The participation of scientists from so many countries indicates the importance of pressure metrology from the scientific and industrial points of view. Most papers were presented by scientists from national standards laboratories, with eight papers from universities and four from industry. Eleven papers reported the results of cooperative work involving metrological institutions dealing with high pressure, generally national standards laboratories, an indication that scientific links are already well established at this level. Links are also strengthening between industry and standards laboratories. Although industrial participation at the seminar was relatively small

  16. Information Technology and Language Development. Occasional Paper InTER/10/89.

    Science.gov (United States)

    Rymaszewski, Rachel, Ed.

    This report of a seminar on information technology (IT) and language development begins by presenting background on language skills and information technology in order to define the scope of the topic. The report then pulls together and elaborates on the output of the seminar. The first section discusses media-centered issues, including the design…

  17. High strength Al–Al2O3p composites: Optimization of extrusion parameters

    DEFF Research Database (Denmark)

    Luan, B.F.; Hansen, Niels; Godfrey, A.

    2011-01-01

    Composite aluminium alloys reinforced with Al2O3p particles have been produced by squeeze casting followed by hot extrusion and a precipitation hardening treatment. Good mechanical properties can be achieved, and in this paper we describe an optimization of the key processing parameters...... on an investigation of their mechanical properties and microstructure, as well as on the surface quality of the extruded samples. The evaluation shows that material with good strength, though with limited ductility, can be reliably obtained using a production route of squeeze casting, followed by hot extrusion....... The parameters investigated are the extrusion temperature, the extrusion rate and the extrusion ratio. The materials chosen are AA 2024 and AA 6061, each reinforced with 30vol.% Al2O3 particles of diameter typically in the range from 0.15 to 0.3μm. The extruded composites have been evaluated based...

  18. Friction conditions in the bearing area of an aluminium extrusion process

    NARCIS (Netherlands)

    Ma, X.; de Rooij, Matthias B.; Schipper, Dirk J.

    2012-01-01

    In aluminium extrusion processes, friction inside the bearing channel is important for controlling the surface quality of the extrusion products. The contact materials show a large hardness difference, one being hot aluminium, and the other being hardened tool steel. Further, the contact pressure is

  19. Factors affecting irrigant extrusion during root canal irrigation: a systematic review

    NARCIS (Netherlands)

    Boutsioukis, C.; Psimma, Z.; van der Sluis, L.W.M.

    2013-01-01

    The aim of the present study was to conduct a systematic review and critical analysis of published data on irrigant extrusion to identify factors causing, affecting or predisposing to irrigant extrusion during root canal irrigation of human mature permanent teeth. An electronic search was conducted

  20. Japan-U. S. seminar on magmatic contributions to hydrothermal systems

    Energy Technology Data Exchange (ETDEWEB)

    Muffler, L. (U. S. Geological Survey, CA (United States)); Hedenquist, J. (Geological Survey of Japan, Tsukuba (Japan)); Kesler, S. (University of Michigan, MI (United States)); Izawa, E. (Kyushu University, Fukuoka (Japan). Faculty of Engineering)

    1992-08-31

    A multidisciplinary Seminar on Magmatic Contributions to Hydrothermal Systems'' was held at Ebino and Kagoshima at Kyushu, November, 1991. The principal purpose of the Ebino/Kagoshima Seminar was to bring together a small group of individuals which have been conducting active research on magmatic contributions to hydrothermal systems. The Seminar focussed on the porphyry and epithermal ore environments because of the potential to relate these environments to active volcanic and geothermal systems. Disciplines included valcanology, volcanic gas geochemistry, water geochemistry, isotope geochemistry, geochemical modeling, experimental geochemistry, igneous petrology, geothermal geology, economic geology, fluid-inclusion study, geophysics, and physical modeling. This paper summarizes the outline and significance of the Seminar. It was pointed out that understanding magmatic contributions to hydrothermal systems would require augmented experimental investigations, numerical modeling, field studies, and drilling.

  1. A novel plastification agent for cemented carbides extrusion molding

    International Nuclear Information System (INIS)

    Ji-Cheng Zhou; Bai-Yun Huang

    2001-01-01

    A type of novel plastification agent for plasticizing powder extrusion molding of cemented carbides has been developed. By optimizing their formulation and fabrication method, the novel plastification agent, with excellent properties and uniform distribution characters, were manufactured. The thermal debinding mechanism has been studied, the extruding rheological characteristics and debinding behaviors have been investigated. Using the newly developed plastification agent, the cemented carbides extrusion rods, with diameter up to 25 mm, have been manufactured. (author)

  2. Teaching Controversy by Seminar: An Example in Quaternary Geomorphology.

    Science.gov (United States)

    Harwood, Doug

    1987-01-01

    Describes how seminar work can be structured to help students develop skills of critical thinking and expression when discussing controversial issues in their chosen subject. Particular emphasis is given to methods of organizing instructional materials and appropriate roles for seminar leaders. The debate surrounding the existence of a prehistoric…

  3. Climate technology and energy efficiency. From ''best practice'' experiences to policy diffusion. Climate technology initiative capacity building seminar for CEE/FSU countries. Seminar proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Tempel, Sybille; Moench, Harald (eds.); Mez, Lutz; Krug, Michael; Grashof, Katharina (comps.) [Free Univ. Berlin (DE). Environmental Policy Research Centre (FFU)

    2005-01-15

    The seminar proceedings cover the following contributions following the opening address: Germany's climate protection program - a step by step approach; the renewable energy act in Germany; CTI's activities for technology transfer on climate change; the climate protection programs of the Federal states: the example of Bavaria; UNECE energy efficiency market formation activities and investment project development to reduce GHG emissions in economies in transition; energy efficiency - policy designs and implementation in PEEREA countries; environmental fiscal reform in Germany; instruments to overcome existing barriers to energy efficiency projects in Bulgaria; proposal to establish a testing ground facility for JI projects in the Baltic sea region testing ground; the Baltic sea region joint implementation testing ground, the Estonian perspective; policy instrumentation; financing international market penetration of renewable energies: a report on the German export initiative; the Dutch ERUPT and CERUPT programs - lessons and outlook; co-operation between Austrian and Central and Eastern Europe in the field of energy efficiency and renewable energy; biomass and pellet market:: implementation strategies in Slovakia; results of monitoring of the German biomass ordinance; developing RES strategy for the Czech republic; building retrofit and renewable energy; energy conversion; between economics and environment - energy saving in German housing sector; implementation and performance contracting in Slovenia; sustainable institutional mechanisms of efficient energy use in Rostov oblast health care and educational facilities; towards sustainable housing management in Lithuania; emissions trading will accelerate the introduction of renewable energies into the markets; Energy efficiency in residential and public buildings; international climate protection policy; long-term perspectives for as sustainable energy future in Germany, the Danish program Energy 21; the

  4. Extrusion-cooking to improve the animal feed quality of broad beans

    NARCIS (Netherlands)

    Moscicki, L.; Wojcik, S.; Plaur, K.; Zuilichem, van D.J.

    1984-01-01

    Extrusion-cooking of broad beans with a single-screw extruder has been investigated. Attention was focused on process requirements as well as on the nutritional effects of extrusion-cooked broad beans in a chicken feed formulation. The optimal thermal process conditions required for a product of

  5. Fifteenth Arctic and Marine Oilspill Program technical seminar

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    At a seminar focusing on Arctic and marine oil spills, papers were presented on the behavior and fate of spilled oil, assessment of oil spill damage and risk, spill response initiatives, research and experimentation in oil spills, spill contingency planning, remote sensing, oil spill countermeasures, in-situ burning, bioremediation, biological effects of spills, and shoreline cleanup. Separate abstracts have been prepared for 57 papers from this seminar.

  6. Relationship Between Preoperative Extrusion of the Medial Meniscus and Surgical Outcomes After Partial Meniscectomy.

    Science.gov (United States)

    Kim, Sung-Jae; Choi, Chong Hyuk; Chun, Yong-Min; Kim, Sung-Hwan; Lee, Su-Keon; Jang, Jinyoung; Jeong, Howon; Jung, Min

    2017-07-01

    No previous study has examined arthritic change after meniscectomy with regard to extrusion of the medial meniscus. (1) To determine the factors related to preoperative meniscal extrusion; (2) to investigate the relationship between medial meniscal extrusion and postoperative outcomes of partial meniscectomy, and to identify a cutoff point of meniscal extrusion that contributes to arthritic change after partial meniscectomy in nonosteoarthritic knees. Cohort study; Level of evidence, 3. A total of 208 patients who underwent partial meniscectomy of the medial meniscus between January 2000 and September 2006 were retrospectively reviewed. The extent of extrusion and severity of degeneration of the medial meniscus as shown on preoperative MRI were evaluated. The minimum follow-up duration was 7 years. Clinical function was assessed with the Lysholm knee scoring scale, the International Knee Documentation Committee (IKDC) subjective knee evaluation form, and the Tapper and Hoover grading system. Radiological evaluation was conducted by use of the IKDC radiographic assessment scale. Regression analysis was performed to identify factors affecting preoperative extrusion of the medial meniscus and factors influencing follow-up results after partial meniscectomy. Receiver operating characteristic curve was used to identify a cutoff point for the extent of meniscal extrusion that was associated with arthritic change. The mean ± SD preoperative Lysholm knee score was 65.0 ± 6.3 and the mean IKDC subjective score was 60.1 ± 7.5. The mean follow-up functional scores were 93.2 ± 5.1 ( P meniscus showed a tendency to increase as the extent of intrameniscal degeneration increased, and the medial meniscus was extruded more in patients with horizontal, horizontal flap, and complex tears. The preoperative extent of meniscal extrusion had a statistically significant correlation with follow-up Lysholm knee score (coefficient = -0.10, P = .002), IKDC subjective score (coefficient

  7. Mars: A Freshmen Year Seminar of Science and Science-fiction

    Science.gov (United States)

    Svec, Michael; Moffett, D. A.; Winiski, M.

    2013-06-01

    "Mars: On the shoulder of giants" is a freshmen year seminar developed collaboratively between the physics, education, and center for teaching and learning. This course focuses on how scientific knowledge is developed through the lens of our changing view of Mars throughout history. Analyses of current studies of Mars are juxtaposed against historical understanding and perceptions of the planet found in scientific and popular literature of the day, as well as the movies. Kim Stanley Robinson’s "Red Mars" provides a unifying story throughout the course complimented by Fredrick Taylor’s "The Scientific Exploration of Mars" and Hartmann’s "A Traveler’s Guide to Mars." Based on the three-years of experience, the authors advocate the use of the speculative science-fiction novel and argue for its use in high school and undergraduate courses including those for science majors. Many of the students who selected this seminar went on to major in science and in subsequent interviews discussed the influence of science fiction on their decision to major in science. Science fiction provided story, science, and speculation that became a rich medium for critical-thinking skills and critical literacy. Student reflections indicated that science fiction served as a reminder of why they study science, a source for imagination, and exploration of science as a human endeavor. Based on this experience, we propose five elements for selecting science-fiction for inclusion in science classes: 1) Provides a deep description of the science content or technologies, 2) Describes science and technologies are plausible or accurate to the time period, 3) Contains a novum or plausible innovation that plays a key element in the speculation, 4) Exploration of the impact on society or humanity, and, 5) Shows science and technology as human endeavors.

  8. The Energetics and Physiological Impact of Cohesin Extrusion.

    Science.gov (United States)

    Vian, Laura; Pękowska, Aleksandra; Rao, Suhas S P; Kieffer-Kwon, Kyong-Rim; Jung, Seolkyoung; Baranello, Laura; Huang, Su-Chen; El Khattabi, Laila; Dose, Marei; Pruett, Nathanael; Sanborn, Adrian L; Canela, Andres; Maman, Yaakov; Oksanen, Anna; Resch, Wolfgang; Li, Xingwang; Lee, Byoungkoo; Kovalchuk, Alexander L; Tang, Zhonghui; Nelson, Steevenson; Di Pierro, Michele; Cheng, Ryan R; Machol, Ido; St Hilaire, Brian Glenn; Durand, Neva C; Shamim, Muhammad S; Stamenova, Elena K; Onuchic, José N; Ruan, Yijun; Nussenzweig, Andre; Levens, David; Aiden, Erez Lieberman; Casellas, Rafael

    2018-05-17

    Cohesin extrusion is thought to play a central role in establishing the architecture of mammalian genomes. However, extrusion has not been visualized in vivo, and thus, its functional impact and energetics are unknown. Using ultra-deep Hi-C, we show that loop domains form by a process that requires cohesin ATPases. Once formed, however, loops and compartments are maintained for hours without energy input. Strikingly, without ATP, we observe the emergence of hundreds of CTCF-independent loops that link regulatory DNA. We also identify architectural "stripes," where a loop anchor interacts with entire domains at high frequency. Stripes often tether super-enhancers to cognate promoters, and in B cells, they facilitate Igh transcription and recombination. Stripe anchors represent major hotspots for topoisomerase-mediated lesions, which promote chromosomal translocations and cancer. In plasmacytomas, stripes can deregulate Igh-translocated oncogenes. We propose that higher organisms have coopted cohesin extrusion to enhance transcription and recombination, with implications for tumor development. Copyright © 2018 Elsevier Inc. All rights reserved.

  9. [A seminar for thinking?].

    Science.gov (United States)

    Touzet, Patrick

    2014-01-01

    The sociopolitical context in which we carry out our caregiving profession influences our methods of working. In our world marked by rationalism, thinking about care, in the framework of a seminar, is a way of engaging ourselves and of not simply becoming a functionary of care.

  10. Scientific writing seminar for early-stage investigators in substance abuse research.

    Science.gov (United States)

    Guydish, Joseph; Masson, Carmen; Flentje, Annesa; Shopshire, Michael; Sorensen, James L

    2016-01-01

    There is little information on how to increase the scientific writing productivity of early-stage investigators in the addictions field. A scientific writing seminar is presented in this article, aiming to encourage manuscript writing and dissemination of addiction research, and outcomes are reported for 14 years of the seminar. In 14 years, there were 113 postdoctoral fellow enrollments in a 6-month writing seminar. Records of submission and publication rates of manuscripts were collected for 14 cohorts. Of the 113 participant enrollments, 97 (86%) submitted a manuscript for publication, and 87 participants (77%) published their manuscript. A scientific writing seminar may benefit writing productivity, but more research is needed to compare this training model with other existing models.

  11. Preparation for retirement seminar

    CERN Multimedia

    HR Department

    2010-01-01

    (Health insurance and wealth and succession planning) During the preparation for retirement seminar in November 2009, the sessions on health insurance in Switzerland and in France unfortunately had to be postponed. Participants in the seminar also expressed interest in an information session on “How to manage your wealth and organize your succession”. The sessions on health insurance will be held on 16 March 2010 and those on managing wealth and succession on 18 March 2010. Programme for Tuesday 16 March 2010 (TH Theory Conference Room, Building 4/3-006): 09:00 Health insurance in Switzerland by Mr. Sandro Breitenstein, Service de l'Assurance Maladie du Canton de Genève 10:00 Coffee break 10:20 Health insurance in France by Mr. Dominique Curtiaud, Caisse Primaire d'Assurance Maladie de l'Ain Programme for Thursday 18 March 2010 (TH Theory Conference Room, Building 4/3-006): 09:00 How to manage your wealth and organize your succession in Switzerland by Mr. Jean-Marc W...

  12. Metal extrusion using hydrostatic pressures; Le filage des metaux sous pression hydrostatique

    Energy Technology Data Exchange (ETDEWEB)

    Sauve, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The main problems connected with the deformation of metals due to extrusion are described. A method is put forward for calculating the rational rate of percentage deformation in the case of bar extrusion using a cylindrical container; reference is made to previous work on extrusion using a hydrostatic pressure with or without back-pressure. An extrusion process is described using hydrostatic pressure, without back-pressure, and using the lubricant for transmitting the thrust. This process has been used for eight years by the C.E.A. for the extrusion of a very wide range of metals, from beryllium to uranium and including steels; it leads to excellent surface textures. A very fine crystallization can be obtained on extruded products when the rate of extrusion is very low. There appears to be nothing against the use of high extrusion rates using this method. (author) [French] On expose les problemes generaux lies a la deformation des metaux par filage. On propose un calcul de la vitesse rationnelle de deformation pour cent dans le cas du filage de barres a partir d'un conteneur cylindrique, et l'on cite les travaux anterieurs sur le filage par faction d'une pression hydrostatique sans ou avec une contre-pression. On decrit un procede de filage par l'action d'une pression hydrostatique, sans contre-pression, utilisant le lubrifiant pour transmettre la poussee. Ce procede employe depuis 8 ans au C.E.A. pour filer les metaux les plus divers, depuis le beryllium jusqu'a l'uranium en passant par les aciers, permet d'obtenir d'excellents etats de surface. Une cristallisation tres fine peut etre obtenue sur les produits files lorsque le filage est tres lent. Rien ne parait s'opposer a ce que des filages rapides soient effectues avec cette methode. (auteur)

  13. Study on reactive extrusion processes of block copolymer

    International Nuclear Information System (INIS)

    Wu Lili; Jia Yuxi; Sun Sheng; Zhang Guofang; Zhao Guoqun; An Lijia

    2007-01-01

    The anionic copolymerization process of styrene-butadiene (S/B) block copolymer in a closely intermeshing co-rotating twin screw extruder with butyl-lithium initiator was studied. According to the anionic copolymerization mechanism and the reactive extrusion characteristics, the mathematical models of monomer conversion, average molecular weight and fluid viscosity during the anionic copolymerization of S/B were constructed, and then the reactive extrusion process was simulated by means of the finite volume method and the uncoupled semi-implicit iterative algorithm. Finally, the influence of the feeding mixture composition on conversion was discussed. The simulated results were nearly in agreement with the experimental results

  14. Extrusion and properties of lead zirconate titanate piezoelectric ceramics

    DEFF Research Database (Denmark)

    Cai, S.; Millar, C.E.; Pedersen, L.

    1997-01-01

    The purpose of this work was to develop a procedure for fabricating electroceramic actuators with good piezoelectric properties. The preparation of lead zirconate titanate (PZT) piezoelectric ceramic rods and tubes by extrusion processing is described. The microstructure of extrudates was investi......The purpose of this work was to develop a procedure for fabricating electroceramic actuators with good piezoelectric properties. The preparation of lead zirconate titanate (PZT) piezoelectric ceramic rods and tubes by extrusion processing is described. The microstructure of extrudates...

  15. Proceedings of national seminar neutron activation analysis

    International Nuclear Information System (INIS)

    Agus Taftazani; Muhayatun Santoso; Budi Haryanto; Khatarina Oginawati

    2010-11-01

    Proceedings of national seminar neutron activation analysis in 2010 with the theme of the Role of Nuclear Analytical Techniques in the Field of Environment, Health and Industry. The seminar was organized by Indonesians Neutron Activation Analysis and BATAN Forum. These proceedings contain the result of environmental research in BATAN, universities and institutions associated with the application on neutron activation analysis technique. The purpose of these proceedings was as a useful source of information to spur research and development of activation analysis applications in various fields for the Indonesian welfare. There are 40 articles. (PPIKSN).

  16. First-Year Seminar Faculty: Recruitment, Supports, Motivators, and Challenges

    Science.gov (United States)

    Sobel, Karen

    2018-01-01

    The majority of universities and four-year colleges in the USA currently offer first-year seminars in at least one format. These programs often pride themselves in recruiting from among their institutions' best teachers to lead the seminars. In reality, this process of recruitment to teach in the program, as well as retention of faculty members…

  17. Improvement of mechanical properties and corrosion resistance of biodegradable Mg-Nd-Zn-Zr alloys by double extrusion

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xiaobo, E-mail: xbxbzhang2003@163.com [School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing, 211167 (China); Wang, Zhangzhong [School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing, 211167 (China); Yuan, Guangyin [National Engineering Research Center of Light Alloy Net Forming, Shanghai Jiao Tong University, Shanghai, 200240 (China); Xue, Yajun [School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing, 211167 (China)

    2012-08-01

    Highlights: Black-Right-Pointing-Pointer Microstructure of Mg-Nd-Zn-Zr alloys was refined and homogenized by double extrusion process. Black-Right-Pointing-Pointer The mechanical properties of the alloys were significantly enhanced by double extrusion. Black-Right-Pointing-Pointer The biocorrosion resistance of the alloys was improved by double extrusion. - Abstract: Mg-Nd-Zn-Zr alloy is a novel and promising biodegradable magnesium alloy due to good biocompatibility, desired uniform corrosion mode and outstanding corrosion resistance in simulated body fluid (SBF). However, the corrosion resistance and mechanical properties should be improved to meet the requirement of the biodegradable implants, such as plates, screws and cardiovascular stents. In the present study, double extrusion process was adopted to refine microstructure and improve mechanical properties of Mg-2.25Nd-0.11Zn-0.43Zr and Mg-2.70Nd-0.20Zn-0.41Zr alloys. The corrosion resistance of the alloys after double extrusion was also studied. The results show that the microstructure of the alloys under double extrusion becomes much finer and more homogeneous than those under once extrusion. The yield strength, ultimate tensile strength and elongation of the alloys under double extrusion are over 270 MPa, 300 MPa and 32%, respectively, indicating that outstanding mechanical properties of Mg-Nd-Zn-Zr alloy can be obtained by double extrusion. The results of immersion experiment and electrochemical measurements in SBF show that the corrosion resistance of Alloy 1 and Alloy 2 under double extrusion was increased by 7% and 8% respectively compared with those under just once extrusion.

  18. Improvement of mechanical properties and corrosion resistance of biodegradable Mg–Nd–Zn–Zr alloys by double extrusion

    International Nuclear Information System (INIS)

    Zhang, Xiaobo; Wang, Zhangzhong; Yuan, Guangyin; Xue, Yajun

    2012-01-01

    Highlights: ► Microstructure of Mg–Nd–Zn–Zr alloys was refined and homogenized by double extrusion process. ► The mechanical properties of the alloys were significantly enhanced by double extrusion. ► The biocorrosion resistance of the alloys was improved by double extrusion. - Abstract: Mg–Nd–Zn–Zr alloy is a novel and promising biodegradable magnesium alloy due to good biocompatibility, desired uniform corrosion mode and outstanding corrosion resistance in simulated body fluid (SBF). However, the corrosion resistance and mechanical properties should be improved to meet the requirement of the biodegradable implants, such as plates, screws and cardiovascular stents. In the present study, double extrusion process was adopted to refine microstructure and improve mechanical properties of Mg–2.25Nd–0.11Zn–0.43Zr and Mg–2.70Nd–0.20Zn–0.41Zr alloys. The corrosion resistance of the alloys after double extrusion was also studied. The results show that the microstructure of the alloys under double extrusion becomes much finer and more homogeneous than those under once extrusion. The yield strength, ultimate tensile strength and elongation of the alloys under double extrusion are over 270 MPa, 300 MPa and 32%, respectively, indicating that outstanding mechanical properties of Mg–Nd–Zn–Zr alloy can be obtained by double extrusion. The results of immersion experiment and electrochemical measurements in SBF show that the corrosion resistance of Alloy 1 and Alloy 2 under double extrusion was increased by 7% and 8% respectively compared with those under just once extrusion.

  19. JSPS-NRF-NSFC A3 foresight program seminar. Proceedings of Japan-China joint seminar on atomic and molecular processes in plasma

    International Nuclear Information System (INIS)

    Koike, Fumihiro; Dong Chenzhong; Ding Xiaobin

    2013-02-01

    As one of the activities of JSPS-NRF-NSFC A3 Foresight Program in the field of Plasma Physics (NSFC: No.11261140328), Japan-China Joint Seminar on Atomic and Molecular Processes in Plasma was held on July 30 - August 4, 2012, in Lanzhou, China. The total number of the officially registered participants was 37, in which 14 from Japan, 21 from China, 1 from Germany, and 1 from Ireland. This seminar is the extension of the last three seminars that were held on March 6-11, 2004 in Lanzhou, China, on October 6-12, 2007 in Dunhuang, China, and on October 26-31, 2009 in Xi'an, China. In the nuclear fusion plasma, there are quite a variety of atomic processes such as ionization, excitation, di-electronic recombination, collisional electron transfer, cascade radiation, and cascade Auger decay over the wide range of plasma temperature. The knowledge of those processes is indispensable for the evaluation and improvement of the plasma properties. Especially, in these years, the property of tungsten ions has become a subject of urgent investigations since tungsten has been considered as one of the plasma facing wall materials. Because of the diversity of the subject, it is desirable to investigate them by international collaboration groups. The present seminar may contribute to realize the above stated aim; especially it has given an opportunity for the collaborative workers to illustrate their achievements. The present seminar summarizes the collaborative researches for the last decade and proposes the issues for the future prospect. This issue is the collection of 19 papers presented at the entitled meeting. All the 19 of the presented papers are indexed individually. (J.P.N.)

  20. Interaction and Collective Movement Processing : Report from Dagstuhl Seminar 14132

    NARCIS (Netherlands)

    2014-01-01

    This report documents the program and the outcomes of Dagstuhl Seminar 14132 “Interaction and Collective Movement Processing”. This seminar brought together a group of 30 scientists with varied backgrounds, but with a shared interest in computations involved in the processing of moving entity data,

  1. Suitability of the Yield Criterion in Numerical Simulation of Stretch Bending of Aluminum Extrusions

    International Nuclear Information System (INIS)

    Li, X.Q.; Zhou, X.B.; Wu, X.D.; Gao, H.Z.

    2005-01-01

    Stretch bending is commonly used to shape thin-walled extrusions in aerospace and automotive industries. The extrusions are pre-stretched and bent over rigid curved dies. Effective application of this process demands sufficient knowledge of how different parameters influence the final shape of the product. Numerical simulation is an effective approach to investigate these issues presently. However, the validity of simulation result depends strongly on a precise description of the mechanical behavior of the material. Due to crystallographic texture caused by the extrusion process, aluminium extrusions exhibit significant plastic anisotropy which need be described by advanced constitutive model. In this work stretch bending of aluminum extrusions is simulated by using different anisotropic criteria (Hill quadratic, Barlat three-parameter). The influence of two yield criteria on predicting maximum die force immediately before unloading, permanent sagging and vertical springback displacement in the middle section of extrusion are compared. Maximum die force and springback calculated by two yield criteria are found to be almost same. Permanent sagging is obviously underestimated by two yield criteria, however, prediction by Barlat three-parameter is closer to experiment than one of Hill quadratic yield criterion

  2. Current deformation rates and extrusion of the northwestern Okhotsk plate, northeast Russia

    Science.gov (United States)

    Hindle, D.; Fujita, K.; Mackey, K.

    2006-01-01

    Northeast Asia is a region of broad deformation resulting from the convergence of the Eurasian (EU) and North American (NA) plates. Part of this convergence has been suggested to be relieved by the extrusion and deformation of the Okhotsk plate (OK). Three models for the deformation of the seismically active northwestern corner of the Okhotsk plate, based on different modes of deformation partitioning, are calculated and compared to observations from GPS, seismicity, and geology. The results suggest that this region is being extruded southeastward and deforming internally by a mixture of pure contraction, ``smooth'' extrusion, and ``rigid'' extrusion. Calculated extrusion rates are ~3-5.5 mm/yr, comparable to estimates from geologic data, and internal deformation rates are ~3.0 × 10-9 yr -1. Internal deformation may be only partially accommodated by seismicity, but the short time span of seismic data leaves this subject to large uncertainty.

  3. Seminar on waste treatment and disposal

    International Nuclear Information System (INIS)

    Sneve, Malgorzata Karpow; Snihs, Jan Olof

    1999-01-01

    Leading abstract. A seminar on radioactive waste treatment and disposal was held 9 - 14 November 1998 in Oskarshamn, Sweden. The objective of the seminar was to exchange information on national and international procedures, practices and requirements for waste management. This information exchange was intended to promote the development of a suitable strategy for management of radioactive waste in Northwest Russia to be used as background for future co-operation in the region. The seminar focused on (1) overviews of international co-operation in the waste management field and national systems for waste management, (2) experiences from treatment of low- and intermediate-level radioactive waste, (3) the process of determining the options for final disposal of radioactive waste, (4) experiences from performance assessments and safety analysis for repositories intended for low- and intermediate level radioactive waste, (5) safety of storage and disposal of high-level waste. The seminar was jointly organised and sponsored by the Swedish Radiation Protection Institute (SSI), the Norwegian Radiation Protection Authority (NRPA), the Nordic Nuclear Safety Research (NKS) and the European Commission. A Russian version of the report is available. In brief, the main conclusions are: (1) It is the prerogative of the Russian federal Government to devise and implement a waste management strategy without having to pay attention to the recommendations of the meeting, (2) Some participants consider that many points have already been covered in existing governmental documents, (3) Norway and Sweden would like to see a strategic plan in order to identify how and where to co-operate best, (4) There is a rigorous structure of laws in place, based on over-arching environmental laws, (5) Decommissioning of submarines is a long and complicated task, (6) There are funds and a desire for continued Norway/Sweden/Russia co-operation, (7) Good co-operation is already taking place

  4. Seminar on waste treatment and disposal

    Energy Technology Data Exchange (ETDEWEB)

    Sneve, Malgorzata Karpow; Snihs, Jan Olof

    1999-07-01

    Leading abstract. A seminar on radioactive waste treatment and disposal was held 9 - 14 November 1998 in Oskarshamn, Sweden. The objective of the seminar was to exchange information on national and international procedures, practices and requirements for waste management. This information exchange was intended to promote the development of a suitable strategy for management of radioactive waste in Northwest Russia to be used as background for future co-operation in the region. The seminar focused on (1) overviews of international co-operation in the waste management field and national systems for waste management, (2) experiences from treatment of low- and intermediate-level radioactive waste, (3) the process of determining the options for final disposal of radioactive waste, (4) experiences from performance assessments and safety analysis for repositories intended for low- and intermediate level radioactive waste, (5) safety of storage and disposal of high-level waste. The seminar was jointly organised and sponsored by the Swedish Radiation Protection Institute (SSI), the Norwegian Radiation Protection Authority (NRPA), the Nordic Nuclear Safety Research (NKS) and the European Commission. A Russian version of the report is available. In brief, the main conclusions are: (1) It is the prerogative of the Russian federal Government to devise and implement a waste management strategy without having to pay attention to the recommendations of the meeting, (2) Some participants consider that many points have already been covered in existing governmental documents, (3) Norway and Sweden would like to see a strategic plan in order to identify how and where to co-operate best, (4) There is a rigorous structure of laws in place, based on over-arching environmental laws, (5) Decommissioning of submarines is a long and complicated task, (6) There are funds and a desire for continued Norway/Sweden/Russia co-operation, (7) Good co-operation is already taking place.

  5. 110. PTB seminar: Dose rate measurements of ionizing radiation in the range of natural ambient radiation. Proceedings

    International Nuclear Information System (INIS)

    Lauterbach, U.; Pessara, W.; Woehler-Figgen, S.

    1997-12-01

    Measuring instruments for radiation dose measurement in the range of natural ambient radiation are not subject to legal obligations for calibration and the PTB received numerous requests in the past, asking for measures to be taken in order to ensure reliability of measuring results in this range of radiation. This has induced PTB to organise the seminar, intended to present the current status of measuring technology in this field, reveal problems encountered in practical applications, and discuss suitable ction for quality assurance. The papers of the seminar report the measuring performance and capabilities of the available instruments, results of comparative analyses of measurements, and resulting proposed action for quality assurance. Discussions concluding the sessions are also presented in the processdings volume. (orig./CB) [de

  6. Numerical investigations on the lateral angular co-extrusion of aluminium and steel

    Science.gov (United States)

    Behrens, B.-A.; Klose, C.; Chugreev, A.; Thürer, S. E.; Uhe, J.

    2018-05-01

    In order to save weight and costs, different materials can be combined within one component. In the novel process chain being developed within the Collaborative Research Centre (CRC) 1153, joined semi-finished workpieces are used to produce hybrid solid components with locally adapted properties. Different materials are joined in an initial step before the forming process takes place. Hereby, the quality of the joining zone is improved by means of the thermo-mechanical treatment during the forming and machining processes. The lateral angular co-extrusion (LACE) approach is used to produce semi-finished workpieces because it allows for the production of coaxial semi-finished products consisting of aluminium and steel. In the further process chain, these semi-finished products are processed into hybrid bearing bushings with locally adapted properties by die forging. In the scope of this work, numerical investigations of the co-extrusion of aluminium-steel compounds were carried out using finite element (FE) simulation in order to examine the influence of the process parameters on the co-extrusion process. For this purpose, the relevant material properties of the aluminium alloy EN AW-6082 were determined experimentally and subsequently implemented in the numerical model. The obtained numerical model was used to study the impact of different ram speeds, press ratios and billet temperatures on the resulting extrusion forces and the material flow. The numerical results have been validated using force-time curves obtained from experimental extrusion tests carried out on a 2.5 MN laboratory extrusion press.

  7. Extrusion and drawing of zircaloy 2. Production of pressure tubes for EL-4

    International Nuclear Information System (INIS)

    Thevenet, J.

    1964-01-01

    The authors give briefly the physical mechanical and chemical properties of zircaloy 2, as far as the transformation of this alloy is concerned. Extrusion: After a few general remarks concerning the extrusion and co-extrusion, including a comparison of the deformation resistance of canning metals and of zircaloy 2, the following points are considered: - the difficulties occurring because of the use of this alloy: - atmosphere protection - adjustment on to the machine tools - low thermal conductivity - economy of the metal (price) - the factors affecting the quality of the extruded products extrusion under a copper can and under lubricant glass - fine grain structure - temperature homogeneity - working temperature The transformation cycle - '550 kg ingot - preliminary shape 'for drawing of EL-4 tubes (112 x 120 L 12 m)' - is described in detail (extrusion or forging of the φ = 340 ingot into φ = 220 billets, cutting into lengths and hot drilling at φ = 125, fixing into a copper can and rough extrusion). Drawing: The main difficulties are due to seizing of the tools and to the necessity of protecting the alloy from the atmosphere during annealings. A brief description is given of drawing out on a short mandrel, on a long mandrel, of laminating on a reducing machine and of the carrying out of an annealing, as well as of the production of EL-4 tubes (φ =107 x 113 L 430 m) by drawing out shapes having a size of 112 x 120 on long mandrels. Conclusion: It is possible by extrusion and drawing to produce zircaloy 2 tubes similar to those which may be obtained normally using stainless steel. (authors) [fr

  8. Proceedings of the Twenty Second Nordic Seminar on Computational Mechanics

    DEFF Research Database (Denmark)

    This book contains the proceedings of the Twenty Second Nordic Seminar on Computational Mechanics (NSCM22), taking event 22-23 October 2009 at Aalborg University, Denmark. The papers presented at the Optimization Seminar in Honour of Niels Olhoff, held 21 October 2009 at Aalborg University, Denmark...

  9. International seminar on structural investigations on pulsed neutron sources. Proceedings

    International Nuclear Information System (INIS)

    Aksenov, V.L.; Balagurov, A.M.; Taran, Yu.V.

    1993-01-01

    The proceedings of the International seminar on structural investigations using pulsed neutron sources are presented. The seminar is dedicated to the memory of Dr. Yu.M. Ostanevich, a world acknowledged physicist. The problems of structural analysis using pulsed neutron source at the IBR-2 reactor are discussed

  10. Technical Training seminar: Texas Instruments

    CERN Multimedia

    2006-01-01

    Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) POWER - A short approach to Texas Instruments power products Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to the SWIFT software FPGA + CPLD power solutions WIRELESS / CHIPCON Decision criteria when choosing a RF platform Introduction to Texas Instruments wireless products: standardized platforms proprietary platforms ( 2.4 GHz / sub 1 GHz) development tools Antenna design: example for 2.4 GHz questions, discussion Industrial partners: Robert Medioni, François Caloz / Spoerle Electronic, CH-1440 Montagny (VD), Switzerland Phone: +41 24 447 0137, email: RMedioni@spoerle.com, http://www.spoerle.com Language: English. Free s...

  11. Environmental Nanoscience: Turning Outreach Activities into a College Freshman Seminar

    Science.gov (United States)

    Nguyen, M. L.; Lau, B.

    2017-12-01

    Teaching nano concepts can be a daunting task due to the varying science backgrounds of the audience. Nonetheless, nanoscience education is important as nanotechnology expands. Our perspective is that nano education must be available at earlier stages than what is currently available. Through outreach activities, we examined how high school students and STEM middle/high school teachers approached answering questions about nanomaterials and the environment to design an effective freshman-level college seminar with achievable course goals. Specifically, participants were asked: 1) what color would you expect gold nanoparticles to be; 2) what are ways we can remove nanomaterials from the environment; and 3) what do you expect will happen to nanomaterials when salt is introduced into the system? Initial analysis showed STEM middle and high school teachers and high school students responded similarly. In response to question 1, the majority of the responses suggested color was a function of size. For question 2, both groups suggested the use of filters, magnets or a chemical reaction to remove the nanomaterials. For question 3, both groups expected a chemical reaction to occur. Understanding how foundational high school STEM concepts influenced responses could assist in the curriculum development for an introductory undergraduate nanoscience course. For example, familiar principles of physics and chemistry appeared to direct student responses. From these results, we developed three course goals to test in our college freshman seminar: 1) differentiate between properties of nanomaterials and conventional materials; 2) describe the role of nanomaterials in household items; and 3) form an opinion on the potential impacts of nanoscience and technology on the human health and the environment. Surveys from our first semester showed that the seminar was effective in achieving all course goals for the majority of students.

  12. Exploring Differences in Online Professional Development Seminars with the Community of Inquiry Framework

    Science.gov (United States)

    Fusco, Judi; Haavind, Sarah; Remold, Julie; Schank, Patricia

    2011-01-01

    Four sessions of two professional development seminars were offered to members of an organization. The seminars were voluntary, free of charge, and participants did not receive credit for their attendance. Participation rates and exit survey ratings for the four sessions varied. After the seminars, an analysis using the community of inquiry…

  13. Sulakultuur. d-Fusion seminar Helsingis = The culture of fusion. d-Fusion seminar in Helsinki / Inga Raukas

    Index Scriptorium Estoniae

    Raukas, Inga, 1967-

    2001-01-01

    Kaasaegsete linnakultuuride sulandumine ja hajumine. Seminar ja videonäitus Finlandia Talos 7.-8. juulini 2001. Seminari korraldanud arhitektuuribüroo Ocean North installatsioone ja Töölö jalgpallistaadioni projekt

  14. NKS/SOS-1 Seminar, 2000-09-25. Risk communication in Oskarshamn

    International Nuclear Information System (INIS)

    Andersson, K.

    2001-04-01

    The report describes presentations and discussions at a seminar held in Oskarshamn on September 25, 2000. The title of the seminar was 'Risk communication in Oskarshamn.' It dealt with issues of importance for the communication about nuclear say within the OKG power company, within the local safety council, between the two organizations and outwards to the public and media. The local safety council consists of elected representatives in the municipal board. The main components in the seminar were 1) results from focus group discussions and questionnaire responses by Britt-Marie Drottz Sjoeberg, 2) elements in communication by Bjoern Wahlstroem, and 3) the journalistic perspective by Katarina Ek. The seminar gave the participants a deeper understanding about local problems in risk communication, generic elements in a communication process and the working conditions for journalists. (au)

  15. Cervical artificial disc extrusion after a paragliding accident.

    Science.gov (United States)

    Niu, Tianyi; Hoffman, Haydn; Lu, Daniel C

    2017-01-01

    Cervical total disc replacement (TDR) is an established alternative to anterior cervical discectomy and fusion (ACDF) with excellent long-term outcomes and low failure rates. Cases of implant failure and migration are scarce and primarily limited to several years postoperatively. The authors report a case of anterior extrusion of a C4-C5 ProDisc-C (DePuy Synthes, West Chester, PA, USA) cervical artificial disc (CAD) 14 months after placement due to minor trauma. A 33-year-old female who had undergone C4-C5 CAD implantation presented with neck pain and spasm after experiencing a paragliding accident. A 4 mm anterior protrusion of the CAD was seen on x-ray. She underwent removal of the CAD followed by anterior fusion. Other cases of CAD extrusion in the literature are discussed and the device's durability and testing are considered. Overall, CAD extrusion is a rare event. This case is likely the result of insufficient osseous integration. Patients undergoing cervical TDR should avoid high-risk activities to prevent trauma that could compromise the disc's placement, and future design/research should focus on how to enhance osseous integration at the interface while minimizing excessive heterotopic ossification.

  16. Extrusion-mixing compared with hand-mixing of polyether impression materials?

    Science.gov (United States)

    McMahon, Caroline; Kinsella, Daniel; Fleming, Garry J P

    2010-12-01

    The hypotheses tested were two-fold (a) whether altering the base:catalyst ratio influences working time, elastic recovery and strain in compression properties of a hand-mixed polyether impression material and (b) whether an extrusion-mixed polyether impression material would have a significant advantage over a hand-mixed polyether impression material mixed to the optimum base:catalyst ratio. The polyether was hand-mixed at the optimum (manufacturers recommended) base:catalyst ratios (7:1) and further groups were made by increasing or decreasing the catalyst length by 25%. Additionally specimens were also made from an extrusion-mixed polyether impression material and compared with the optimum hand-mixed base:catalyst ratio. A penetrometer assembly was used to measure the working time (n=5). Five cylindrical specimens for each hand-mixed and extrusion mixed group investigated were employed for elastic recovery and strain in compression testing. Hand-mixing polyether impression materials with 25% more catalyst than that recommended significantly decreased the working time while hand-mixing with 25% less catalyst than that recommended significantly increased the strain in compression. The extrusion-mixed polyether impression material provided similar working time, elastic recovery and strain in compression to the hand-mixed polyether mixed at the optimum base:catalyst ratio.

  17. Statistical reliability analyses of two wood plastic composite extrusion processes

    International Nuclear Information System (INIS)

    Crookston, Kevin A.; Mark Young, Timothy; Harper, David; Guess, Frank M.

    2011-01-01

    Estimates of the reliability of wood plastic composites (WPC) are explored for two industrial extrusion lines. The goal of the paper is to use parametric and non-parametric analyses to examine potential differences in the WPC metrics of reliability for the two extrusion lines that may be helpful for use by the practitioner. A parametric analysis of the extrusion lines reveals some similarities and disparities in the best models; however, a non-parametric analysis reveals unique and insightful differences between Kaplan-Meier survival curves for the modulus of elasticity (MOE) and modulus of rupture (MOR) of the WPC industrial data. The distinctive non-parametric comparisons indicate the source of the differences in strength between the 10.2% and 48.0% fractiles [3,183-3,517 MPa] for MOE and for MOR between the 2.0% and 95.1% fractiles [18.9-25.7 MPa]. Distribution fitting as related to selection of the proper statistical methods is discussed with relevance to estimating the reliability of WPC. The ability to detect statistical differences in the product reliability of WPC between extrusion processes may benefit WPC producers in improving product reliability and safety of this widely used house-decking product. The approach can be applied to many other safety and complex system lifetime comparisons.

  18. Public hearing process for nuclear power plants. Seminar report

    International Nuclear Information System (INIS)

    1979-02-01

    On June 26 and 27, 1978, the Nuclear Regulatory Commission conducted a seminar on the public hearing process for nuclear power plants. The seminar was intended to examine current practices regarding the conduct of public hearings and how these practices related to the statutory intent, to assess whether existing procedures are being followed, and to explore whether administrative or legal changes are warranted. The seminar format allowed exchanges of views among participants in the hearing process and was attended by members of the public, the General Accounting Office, Congressional staffs, NRC, and the nuclear industry. The report contains panel reports on scheduling of public hearings, procedures for Board notification, selection and training of panel members, hearing procedures, and Board functions

  19. [Ethics and transfusion--seminar report].

    Science.gov (United States)

    Hervé, C; Tissot, J-D; Bouësseau, M-C; Pottier, R; Monsellier, M; Garraud, O; Hermine, O; Sannié, T; Cazenave, J-P; Cabaud, J-J; Lefrère, J-J

    2014-05-01

    This paper brings together the abstracts and proceedings of a seminar held on the topic of "ethics and transfusion", October 15, 2013 at the National Institute of Blood Transfusion, Paris. Copyright © 2014. Published by Elsevier SAS.

  20. Audiovisual Documentation of an International Seminar : Case: LIME

    OpenAIRE

    Tikkanen, Kirsti; Rönnberg, Mira

    2013-01-01

    The aim of this Bachelor’s thesis is to create a documentary video of an international seminar held in Kerava, Finland, in June 2013. The seminar was called Learning on Immigration and Multicultural Education (LIME) and it was conducted by Kerava Adult Education Center (later Keravan Opisto). LIME was a two-year intercultural project funded by the European Union. Different non-governmental organizations and adult education centers from eight European countries took part on the project. The ai...

  1. Texas Instruments Technical Seminar: Power Management and Wireless

    CERN Multimedia

    2006-01-01

    Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar: Power Management and Wireless Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) The range of power management products available today offers the possibility to find the best solution for each application. To select the right product it is therefore necessary to understand system requirements, how power supply products work, and where they differentiate. This Technical Training Seminar will also present an overview of how to choose the right RF platform based on markets and applications: nowadays almost everbody has at least one wireless product in use, and this tendency seems to increase significantly. Power Management Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to evaluati...

  2. Texas Instruments Technical Seminar: Power Management and Wireless

    CERN Multimedia

    2006-01-01

    Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar: Power Management and Wireless Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) The range of power management products available today offers the possibility to find the best solution for each application. To select the right product it is therefore necessary to understand system requirements, how power supply products work, and where they differentiate. This Technical Training Seminar will also present an overview of how to choose the right RF platform based on markets and applications: nowadays almost everbody has at least one wireless product in use, and this tendency seems to increase significantly. Power Management Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to evalu...

  3. The Impact of First-Year Seminars on College Students' Life-Long Learning Orientations

    Science.gov (United States)

    Padgett, Ryan D.; Keup, Jennifer R.; Pascarella, Ernest T.

    2013-01-01

    Using longitudinal data from the Wabash National Study of Liberal Arts Education, this study measured the impact of first-year seminars on college students' life-long learning orientations. The findings suggest that first-year seminars enhance students' life-long learning orientations and that the effect of first-year seminars is mediated through…

  4. Esimene ILO seminar toimus Taasiseseisvunud Baltimaades

    Index Scriptorium Estoniae

    1993-01-01

    Rahvusvahelise Tööorganisatsiooni (International Labour Organisation, ILO) seminar Riias tööandjate organisatsioonide rollist turumajanduses. Tööstus- ja Energeetikaministeeriumi finantsosakonna juhataja Sven Kööp

  5. Proceedings of the 2nd seminar of R and D on advanced ORIENT

    International Nuclear Information System (INIS)

    Sasaki, Yuji; Yamagishi, Isao; Ozawa, Masaki

    2009-03-01

    The 2nd Seminar of R and D on advanced ORIENT was held at Ricotte, on November 7th, 2008, Japan Atomic Energy Agency. The first meeting of this seminar was held on Oarai, Ibaraki on May, 2008, and more than fifty participants including related researchers and general public people were attended to this seminar. The second seminar has headed by Nuclear Science and Engineering Directorate, JAEA on Tokai, Ibaraki with 63 participants. Spent nuclear fuel should be recognized not only mass of radioactive elements but also potentially useful materials including platinum metals and rare earth elements. Taking the cooperation with universities related companies and research institutes, into consideration, we aimed at expanding and progressing the basic researches. This report records abstracts and figures submitted from the oral speakers in this seminar. (author)

  6. International seminar on Post nuclear accident from May 5 and 6, 2011 - The CODIRPA progresses

    International Nuclear Information System (INIS)

    Birraux, Claude; Lacoste, Andre-Claude; Lachaume, Jean-Luc; Mehl-Auget, Isabelle; Godet, Jean-Luc; Dandrieux, Geraldine; Delmestre, Alain; Gallay, Florence; Niel, Jean-Christophe; Bataille, Christian; Dederen, Guillaume; Guenon, Catherine; Repussard, Jacques; Cessac, Bruno; Champion, Didier; Miniere, Dominique; Andrieux, Jean-Luc; Bernard, Herve; Delalonde, Jean-Claude; Calafat, Alexis; Demet, Michel; Barbey, Pierre; Janssens, Augustin; Lazo, Ted; Ahier, Brian; Ugletveit, Finn; Guerson, Nathalie; Riou, Jeanine; Robert, Joel; Pirard, Philippe; Gerbeaux, Jerome; Foix, Olivier; Le Gac, Alain; Lahaye, Thierry; Wiest, Annick; Crouail, Pascal; Lochard, Jacques; Villers, Anita; Eberbach, Friedrich; Murith, Christophe; Samain, Jean-Paul; Javanni, Jean; Averin, Viktor; Trafimchik, Zoia; Liland, Astrid; Durand, Francois

    2011-01-01

    The objective of the seminar is the anticipation of the radiological emergency situations to limit the consequences of nuclear accidents. The Steering Committee to manage the post-accident of a Nuclear Accident or Radiological Emergency (CODIRPA) was started in June 2005 by the French nuclear safety authority (ASN), and was charged with developing French policy for the management of the post-accident phase of a nuclear or radiological accident situation. An ambitious program mobilising more than 200 people was put in place, including representatives of relevant national administrations and their local representatives, utility and industrial representatives, technical service organisations, nuclear safety authorities from bordering countries to France, NGOs and local elected officials. On December 2007, the previous seminar had constructively challenged the work of CODIRPA with international experiences and analysis. The 2011 seminar, organized by ASN with the support of the Parliamentary Office for the Evaluation of Scientific Choices and Technologies (OPECST), reports on the progress of the national doctrine's construction. The National Preparedness Guide for Exiting the Emergency Phase and drawn lessons concerning its local adaptation by regional and local community governmental organizations was presented at this occasion. The parliamentary mission headed by OPECST on the safety of nuclear installations holds its first public hearing on May 5, 2011. The seminar provides an opportunity for members of the parliamentary mission to learn about crisis management and post-accident of the major nuclear accident occurred in Japan at Fukushima. This document comprises a complete FR/EN detailed synthesis of the seminar followed by the recommendations of CODIRPA (in French) and by the slides of the available presentations for each session: Opening of the meeting; Session 1: National Preparedness Guide for Exiting the Emergency Phase; Session 2: Development of the

  7. Effect of rapid cooling and extrusion ratio on the mechanical property of Mg alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Taek-Soo, E-mail: tskim@kitech.re.k [Center for Echo Materials and Processing, Korea Institute of Industrial Technology, 7-47 Techno-park Songdo, Incheon 406-130 (Korea, Republic of)

    2010-08-15

    Mg{sub 95}Zn{sub 4.3}Y{sub 0.7} (at.%) alloy powders were prepared using an inert gas atomizer, followed by warm extrusion. The powders were almost spherical in shape, and the grain size, compared with the cast product, was fine being less than 5 {mu}m. The microstructure of bars extruded was examined as a function of the extrusion ratio using scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDS) and X-ray diffractometer (XRD). As the extrusion ratio increased from 10:1 to 20:1, the powders fully deformed with refining the grain size. Both the ultimate strength and elongation also showed a dependence on the extrusion ratio.

  8. Melting, casting, and alpha-phase extrusion of the uranium-2.4 weight percent niobium alloy

    International Nuclear Information System (INIS)

    Anderson, R.C.; Beck, D.E.; Kollie, T.G.; Zorinsky, E.J.; Jones, J.M.

    1981-10-01

    The experimental details of the melting, casting, homogenization, and alpha-phase extrusion process used to fabricate the uranium-2.4 wt % niobium alloy into 46-mm-diameter rods is described. Extrusion defects that were detected by an ultrasonic technique were eliminated by proper choice of extrusion parameters; namely, reduction ratio, ram speed, die angle, and billet preheat temperature

  9. 75 FR 73041 - Aluminum Extrusions From the People's Republic of China: Postponement of Final Determination of...

    Science.gov (United States)

    2010-11-29

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-570-967] Aluminum Extrusions From the... investigation of aluminum extrusions from the People's Republic of China (``PRC'') on April 27, 2010.\\1\\ On..., 2011. \\1\\ See Aluminum Extrusions from the People's Republic of China: Initiation of Antidumping Duty...

  10. 75 FR 34982 - Aluminum Extrusions from the People's Republic of China: Notice of Postponement of Preliminary...

    Science.gov (United States)

    2010-06-21

    ... DEPARTMENT OF COMMERCE International Trade Administration [C-570-968] Aluminum Extrusions from the... in the Federal Register a notice of initiation of the countervailing duty investigation of aluminum extrusions from the People's Republic of China. See Aluminum Extrusions From the People's Republic of China...

  11. Osmotic mechanism of the loop extrusion process

    Science.gov (United States)

    Yamamoto, Tetsuya; Schiessel, Helmut

    2017-09-01

    The loop extrusion theory assumes that protein factors, such as cohesin rings, act as molecular motors that extrude chromatin loops. However, recent single molecule experiments have shown that cohesin does not show motor activity. To predict the physical mechanism involved in loop extrusion, we here theoretically analyze the dynamics of cohesin rings on a loop, where a cohesin loader is in the middle and unloaders at the ends. Cohesin monomers bind to the loader rather frequently and cohesin dimers bind to this site only occasionally. Our theory predicts that a cohesin dimer extrudes loops by the osmotic pressure of cohesin monomers on the chromatin fiber between the two connected rings. With this mechanism, the frequency of the interactions between chromatin segments depends on the loading and unloading rates of dimers at the corresponding sites.

  12. Geschlechterperspektive als integraler Bestandteil eines Seminars zur Prävention des Tabakkonsums [Sex- and gender-related perspectives as an integral part of a seminar dealing with smoking prevention

    Directory of Open Access Journals (Sweden)

    Bisson, Susanne

    2009-08-01

    Full Text Available [english] Despite the standard of knowledge about gender-specific smoking behavior and sex-related characteristics in tobacco-attributable diseases, physicians do not feel competent in providing adequate prevention strategies against both female and male smoking. To address this problem, a seminar on smoking prevention has been developed and evaluated as part of the compulsory interdisciplinary subject “Prevention and Health Promotion” at Hannover Medical School. Supporting this aim, a parallel lecture on the theme is offered.The seminar is composed of four teaching units. They contrast sex- and gender-unspecific factors with specific ones. Using substantively related worksheets, students acquire knowledge within small teams. Interactive education is based on the concept of cooperative learning. The seminar was conducted seven times between July 2006 and July 2008. In total, 145 (94 female/51 male students attended the seminar; 25% of the students said they were smokers. The students showed a significantly higher level of sex- and gender-related acceptance after completion of the seminars than before. No association was found between increase in acceptance and student sex or smoking behavior.The extensive sex and gender awareness cultivated within the seminars involves the gender identity of medical students, teachers, and patients alike. Information transfer is characterized by sex and gender sensitivity at the levels of content, language, and process.[german] Wissenschaftliche Erkenntnisse der letzten Jahre bestätigen die Bedeutung von Geschlechtsspezifika im Rauchverhalten und Auftreten tabakassoziierter Erkrankungen. Dem steht ein ärztlicher Kompetenzmangel hinsichtlich geschlechteradäquater Prävention des Tabakkonsums gegenüber. Mit dem Ziel, diese Diskrepanz zu mindern, wurde innerhalb des Querschnittsbereiches Prävention und Gesundheitsförderung ein Seminar zur Rauchprävention im Rahmen des grundständigen Medizinstudiums

  13. JSPS-NRF-NSFC A3 foresight program seminar. Proceedings of Japan-China-Korea joint seminar on atomic and molecular processes in plasma

    International Nuclear Information System (INIS)

    Kato, Daiji; Ding Xiaobin; Dong Chenzhong

    2016-02-01

    As one of the activities of JSPS-NRF-NSFC A3 Foresight Program in the field of Plasma Physics 'Study on Critical Physics Issues Specific to Steady State Sustainment of High-Performance Plasmas', Japan-China-Korea Joint Seminar on Atomic and Molecular Processes in Plasma (AMPP2015) was held on July 28 - August 1, 2014, in Lanzhou, China. The total number of the officially registered participants was 50. This seminar is the extension of the last four seminars that were held in 2004 in Lanzhou, in 2007 in Dunhuang, in 2009 in Xi'an, and in 2012 in Lanzhou. In the nuclear fusion plasma, there are quite a variety of atomic processes such as ionization, excitation, di-electronic recombination, collisional electron transfer, cascade radiation, and cascade Auger decay over the wide range of plasma temperature. The knowledge of those processes is indispensable for the evaluation and improvement of the plasma properties. Because of the diversity of the subjects, it is desirable to investigate them by international collaboration groups. This seminar is held to discuss achievement during the past two years and issues for the future prospect. This issue is the collection of 16 papers presented at the entitled meeting. All the 16 presented papers are indexed individually. (J.P.N.)

  14. Apical extrusion of debris in four different endodontic instrumentation systems: A meta-analysis.

    Science.gov (United States)

    Western, J Sylvia; Dicksit, Daniel Devaprakash

    2017-01-01

    All endodontic instrumentation systems tested so far, promote apical extrusion of debris, which is one of the main causes of postoperative pain, flare ups, and delayed healing. Of this meta-analysis was to collect and analyze in vitro studies quantifying apically extruded debris while using Hand ProTaper (manual), ProTaper Universal (rotary), Wave One (reciprocating), and self-adjusting file (SAF; vibratory) endodontic instrumentation systems and to determine methods which produced lesser extrusion of debris apically. An extensive electronic database search was done in PubMed, Scopus, Cochrane, LILACS, and Google Scholar from inception until February 2016 using the key terms "Apical Debris Extrusion, extruded material, and manual/rotary/reciprocating/SAF systems." A systematic search strategy was followed to extract 12 potential articles from a total of 1352 articles. The overall effect size was calculated from the raw mean difference of weight of apically extruded debris. Statistically significant difference was seen in the following comparisons: SAF ProTaper. Apical extrusion of debris was invariably present in all the instrumentation systems analyzed. SAF system seemed to be periapical tissue friendly as it caused reduced apical extrusion compared to Rotary ProTaper and Wave One.

  15. The FEM simulation of continuous rotary extrusion (CRE) of aluminum alloy AA3003

    Science.gov (United States)

    Rajendran, Nijenthan; Valberg, Henry; Misiolek, Wojciech Z.

    2017-10-01

    Continuous Rotary Extrusion (CRE) process is also known in literature under Conform TM name and it is mainly used for the continuous extrusion of Aluminum and Copper alloys. CRE use a feedstock in the form of rod, powders and chips, which are fed into the groove of the rotating wheel. As the wheel rotates the feedstock moves along with it due to friction with the wheel. Once the feedstock reaches the abutment the material deforms plastically and it is extruded through the die. CRE has lot to offer when compared to other more conventional extrusion processes such as low energy input, no limit in billet length as it is a continuous process as well as improved material physical properties due to plastic deformation under constant parameters. In this work a FEM model has been developed using Deform TM 3D, to study the metal flow and state variables of AA3003 CRE extrusion. The effect of extrusion wheel velocity has been investigated. The results show that increase in wheel velocity will heat up the feedstock metal due to high shear deformation and higher friction, which significantly changes metal flow conditions at the die exit.

  16. Fiscal 2000 survey report on rationalization project for international energy conservation, technological dissemination project for international energy conservation, and Green Helmet Project. Japan-China alternative energy seminar/waste disposal; 2000 nendo kokusai energy shiyo gorika nado taisaku jigyo, kokusai energy shohi koritsuka nado gijutsu fukyu jigyo, green helmet jigyo chosa hokokusho. Nicchu sekiyu daitai energy seminar haikibutsu shori

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper explains the Japan-China alternative energy seminar (February 28 and March 1, 2001, at Beijing). The purpose of the seminar is to introduce systematic and three-dimensional or land/sea/air measures for waste disposal including recycling in Japan, to provide guidance of measures in improving recognition and methods for waste disposal in China, and also to contribute to the dissemination and promotion of a model project for effectively utilizing waste heat from rubbish incineration, a project being implemented in Harbin City now. The activities of NEDO were introduced, with emphasis placed on a model program, called Green Aid Project, for managing heat from waste incineration. On the subjects of sustainable development, urban environment, and energy, the policy of China's tenth five-year plan was demonstrated, and the treatment of wastes in China was also explained. The present state of waste processing in Japan was introduced, as was its maintenance of the facilities. Concerning Japan's waste processing technologies and characteristics of the equipment, there were presented non-incineration processing including crushing/separating, RDF, compost, methane fermentation, etc.; incineration plants; and each of the technologies such as combustion, exhaust gas, ash treatment, use of remaining heat, and gasification melting. (NEDO)

  17. [The value of mandatory seminars in the education of pre-registration house officers

    DEFF Research Database (Denmark)

    Henriksen, A.H.; Ringsted, C.; Pedersen-Reng, S.

    2008-01-01

    INTRODUCTION: There are advantages and disadvantages of general mandatory seminars in the education of pre-registration house officers. The seminars are highly rated by the pre-registration house officers, but we do not know what value they represent for the pre-registration house officers. The aim...... of this study was to explore this further. MATERIALS AND METHODS: Four focus group interviews with five junior doctors were conducted. Three themes were discussed: the advantages of the seminars, the disadvantages of the seminars and the needs or wishes concerning both the seminars and education generally....... The interviews were transcribed, and a three-step content analysis was carried out in order to identify general aspects of value. RESULTS: Three general aspects were found: 1) the social aspect--being part of a community of like-minded peers, sharing frustrations and experiences and making comparisons with peers...

  18. Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing

    Directory of Open Access Journals (Sweden)

    Ludovic Serex

    2018-02-01

    Full Text Available Advances in 3D printing have enabled the use of this technology in a growing number of fields, and have started to spark the interest of biologists. Having the particularity of being cell friendly and allowing multimaterial deposition, extrusion-based 3D printing has been shown to be the method of choice for bioprinting. However as biologically relevant constructs often need to be of high resolution and high complexity, new methods are needed, to provide an improved level of control on the deposited biomaterials. In this paper, we demonstrate how microfluidics can be used to add functions to extrusion 3D printers, which widens their field of application. Micromixers can be added to print heads to perform the last-second mixing of multiple components just before resin dispensing, which can be used for the deposition of new polymeric or composite materials, as well as for bioprinting new materials with tailored properties. The integration of micro-concentrators in the print heads allows a significant increase in cell concentration in bioprinting. The addition of rapid microfluidic switching as well as resolution increase through flow focusing are also demonstrated. Those elementary implementations of microfluidic functions for 3D printing pave the way for more complex applications enabling new prospects in 3D printing.

  19. Moisture sorption characteristics of extrusion-cooked starch protective loose-fill cushioning foams

    Science.gov (United States)

    Combrzyński, Maciej; Mościcki, Leszek; Kwaśniewska, Anita; Oniszczuk, Tomasz; Wójtowicz, Agnieszka; Sołowiej, Bartosz; Gładyszewska, Bożena; Muszyński, Siemowit

    2017-10-01

    The aim of this work was to determine the water vapour sorption properties of thermoplastic starch filling foams processed by extrusion-cooking technique from various combinations of potato starch and two foaming agents: poly(vinyl) alcohol and Plastronfoam, in amount of 1, 2 and 3% each. Foams were processed with the single screw extruder-cooker at two different screw rotational speeds 100 and 130 r.p.m. The sorption isotherms of samples were determined and described using the Guggenheim-Anderson-de Boer model. Also, the kinetics of water vapour adsorption by foams, as a function of time, was measured and fitted with Peleg model. On the basis of the analysis the influence of the applied foaming agents, as well as the technological parameters of extrusion-cooking process in relation to water vapour adsorption by thermoplastic starch foams was demonstrated. There was no difference between the shapes of the isotherms for poly(vinyl) alcohol foams while for Plastronfoam foams a notable difference among foams extruded at 100 r.p.m. was observed in the regions of low and high humidity content. The analysis of the Guggenheim-Anderson-de Boer model parameters showed that the water molecules were less strongly bound with the foam surface when extruded at a lower screw speed.

  20. Coupled analysis of material flow and die deflection in direct aluminum extrusion

    NARCIS (Netherlands)

    Assaad, W.; Geijselaers, Hubertus J.M.

    2010-01-01

    The design of extrusion dies depends on the experience of the designer. After the die has been manufactured, it is tested during an extrusion trial and machined several times until it works properly. The die is designed by a trial and error method which is an expensive process in terms of time and

  1. Defeating anisotropy in material extrusion 3D printing via materials development

    Science.gov (United States)

    Torrado Perez, Angel Ramon

    Additive Manufacturing technologies has been in continuous development for more than 35 years. Specifically, the later denominated Material Extrusion Additive Manufacturing (MEAM), was first developed by S. Scott Crump around 1988 and trademarked later as Fused Deposition Modeling (FDM). Although all of these technologies have been around for a while, it was not until recently that they have been more accessible to everyone. Today, the market of 3D printers covers all ranges of price, from very specialized, heavy and expensive machines, to desktop printers of only a few cubic inches in volume. Until recently, FDM technology had remained somewhat stagnant in terms of developments; however, with the new market boom, scholars and hobbyists have opened new doors for investigation in this area. The technology is now better understood from a software, mechanical, electrical and not less important, materials point of view. The current availability of materials for MEAM is very broad: PLA (Polylactic Acid), ABS (Acrylonitrile Butadiene Styrene), PC (Polycarbonate), PEEK (Polyether Ether Ketone), nylon, polyurethanes, and many others. Even so, these are all materials that were used before for other technologies, adapted but not specifically developed for MEAM. The processes that take place during the production of a part are currently not very well understood, and the final properties exhibited are long ways away from reaching the potential of more traditional manufacturing techniques. Due to the nature of the process, all the material properties always display a certain level of anisotropy. The research covered in these pages aims to shed some light on understanding the different mechanics taking place during the extrusion process of additive manufacturing. The development of new materials for MEAM has been explored. Several blends and composites have been developed, and their tensile properties and fracture mechanics evaluated. The blending of different combinations of

  2. Proceedings from the Fissile Material Cut-off seminar in Stockholm

    International Nuclear Information System (INIS)

    Arbman, G.

    1998-01-01

    The Swedish Defence Research Establishment hosted an international expert seminar on the subject of verifying a prohibition of the production of fissile material for nuclear weapons purpose (cut-off) in Stockholm, June 3-5 1998. The objective of the seminar was to provide an opportunity for informal discussions among scientific and technical experts on various technical matters relating to the verification of a future Fissile Material Cut-off Treaty (FMCT). A stated aim of the seminar was to keep issues of scope to a minimum. Invited speakers and commentators were given an opportunity to present their views as written contributions. The present seminar proceedings are essentially the result of these views. In addition, short summaries of the discussions following each session are included. Although an attempt was made to be as complete and accurate as possible in reproducing these discussions, the editors apologise if some important points or statements have been omitted. If so, the main reason is that the documentation of the discussions were based on written notes, not taped recordings. Eight longer contributions have been separately indexed

  3. Proceedings from the Fissile Material Cut-off seminar in Stockholm

    Energy Technology Data Exchange (ETDEWEB)

    Arbman, G. [ed.

    1998-07-01

    The Swedish Defence Research Establishment hosted an international expert seminar on the subject of verifying a prohibition of the production of fissile material for nuclear weapons purpose (cut-off) in Stockholm, June 3-5 1998. The objective of the seminar was to provide an opportunity for informal discussions among scientific and technical experts on various technical matters relating to the verification of a future Fissile Material Cut-off Treaty (FMCT). A stated aim of the seminar was to keep issues of scope to a minimum. Invited speakers and commentators were given an opportunity to present their views as written contributions. The present seminar proceedings are essentially the result of these views. In addition, short summaries of the discussions following each session are included. Although an attempt was made to be as complete and accurate as possible in reproducing these discussions, the editors apologise if some important points or statements have been omitted. If so, the main reason is that the documentation of the discussions were based on written notes, not taped recordings. Eight longer contributions have been separately indexed.

  4. THE IMPACT OF EXTRUSION ON THE BIOGAS AND BIOMETHANE YIELD OF PLANT SUBSTRATES

    Directory of Open Access Journals (Sweden)

    Krzysztof Pilarski

    2016-09-01

    Full Text Available The objective of the present work was to determine the effect of pretreatment by extrusion on the biogas and biomethane yield of lignocellulosic substrates such as maize silage and maize straw silage. The biogas yields of the substrates before and after treatment were compared. Moreover, energy efficiency of pretreatment by extrusion was analyzed in order to assess the applicability of the process in an agricultural biogas plant. Extrusion tests were carried out in a short single-screw extruder KZM-2 in which the length-to-diameter ratio of the screw was 6:1 and rotational speed was 200 rpm. The biogas yield tests of the plant substrates after extrusion were carried out in a laboratory scale, using 15 biofermenters operated in a periodic manner, at a constant temperature of 39°C (mesophilic digestion and controlled pH conditions. The gas-emission analysis was performed using a certified gas analyzer from Geotech GA5000. Pretreatment by extrusion was observed to improve the quantity of methane generated: in terms of fresh matter for maize silage subjected to extrusion, the methane yield was 16.48% higher than that of the non-extruded silage. On the other hand, maize straw silage after extrusion gave 35.30% more methane than did the same, non-extruded, material. Differences in yields relative to dry organic matter are also described in this paper. Taking into account the amount of energy that is spent on pretreatment and the generated amount of methane, the energy balance for the process gives an idea of the economics of the operation. For maize silage, energy efficiency was lower by 13.21% (-553.2 kWh/Mg, in contrast to maize straw silage, where the increase in energy was 33.49% (678.4 kWh/Mg. The obtained results indicate that more studies on the pretreatment and digestion of maize silage are required in order to improve the efficiency of its use for making biogas. To fully utilize its potential, it is necessary to know thoroughly the effect of

  5. Proceedings of the 34. AMOP technical seminar on environmental contamination and response 2011

    International Nuclear Information System (INIS)

    2011-01-01

    The 34th AMOP Arctic and marine oilspill conference was held in Banff, Alberta, Canada, from October 4th to October 6th, 2011. The aim of the Arctic and marine oilspill program (AMOP), which was started in 1978 by Environment Canada, is to help improve understanding of oil spills which occur in the Arctic marine environment and the technology for cleaning them up. This technical seminar is held every year by the Emergencies Science and Technology Section (ESTS) of Environment Canada and provides attendees with the opportunity to hear about some of the latest technologies and to discuss with other experts in the field of Arctic and marine environmental contamination and response. 38 out of the 61 papers presented during this conference have been catalogued separately for inclusion in this database

  6. Equal Channel Angular Extrusion Simulation of High-Nb Containing β-γ TiAl Alloys

    Directory of Open Access Journals (Sweden)

    Lai-qi Zhang

    2015-01-01

    Full Text Available TiAl alloys containing high Nb are significantly promising for high-temperature structural applications in aerospace and automotive industries. Unfortunately the low plasticity at room temperature limits their extensive applications. To improve the plasticity, not only optimizing the opposition, but also refining grain size through equal channel angular extrusion (ECAE is necessary. The equal channel angular extrusion simulation of Ti-44Al-8Nb-(Cr,Mn,B,Y(at% alloy was investigated by using the Deform-3D software. The influences of friction coefficient, extrusion velocity, and different channel angles on effective strain, damage factor, and the load on the die were analyzed. The results indicate that, with the increasing of friction coefficient, effective strain is enhanced. The extrusion velocity has little effect on the uniformity of effective strain; in contrast it has large influence on the damage factor. Thus smaller extrusion rate is more appropriate. Under the condition of different channel angles, the larger one results in the lower effective strain magnitude and better strain distribution uniformity.

  7. Study on lead extrusion damper as a seismic support

    International Nuclear Information System (INIS)

    Nomura, T.; Kojima, N.; Fujita, K.; Ito, T.

    1989-01-01

    The fundamental characteristics of two types of lead extrusion dampers (cylinder type, rotary type) for use as the nuclear power plant piping support of the elasto-plastic of damper are clarified. As a result, these lead extrusion dampers are found to have the following dynamic characteristics: hysteresis loop is both rectangular shape and bi-linear shape; maximum reaction force is independent of velocity and frequency but it increases as displacement exceeds the specified value; and the dissipated energy is very large and is independent of velocity, frequency and initial displacement (i.e., thermal expansion of pipings) in the range of test

  8. Analysis of Material Flow in Screw Extrusion of Aluminum

    International Nuclear Information System (INIS)

    Haugen, Bjoern; Oernskar, Magnus; Welo, Torgeir; Wideroee, Fredrik

    2010-01-01

    Screw extrusion of aluminum is a new process for production of aluminum profiles. The commercial potential could be large. Little experimental and numerical work has been done with respect to this process.The material flow of hot aluminum in a screw extruder has been analyzed using finite element formulations for the non-Newtonian Navier-Stokes equations. Aluminum material properties are modeled using the Zener-Holloman material model. Effects of stick-slip conditions are investigated with respect to pressure build up and mixing quality of the extrusion process.The numerical results are compared with physical experiments using an experimental screw extruder.

  9. The 36. Red Deer Seminar - still going strong

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    Several issues dominated the 36th Red Deer Seminar of the propane industry, among them changes to the Alberta fuel tax collection system, propane and automobile emissions and industry self-management. With regard to changes to the Alberta fuel tax collection system, details were provided on how the system, coming into effect on January 1, 1997, will impact on producers, distributors and retailers. In terms of automobile emissions, it was said that propane has lagged behind gasoline in technological development, hence propane no longer has advantages in emissions. It was noted, however, that with equivalent technology propane can still meet ultra-low emission standards. Regarding industry self-management, it was stressed that self-management did not mean deregulation since government retains policy, regulation and standard setting. It means a new partnership arrangement in which industry delivers services formerly provided by government. In this spirit of cooperation, it was announced that effective September 1996, administration of the auto propane vehicle conversion program will be transferred to the PGAC under the name of Alberta Propane Vehicle Administration Organization. 3 figs

  10. An osteophyte in the tibial plateau is a risk factor for allograft extrusion after meniscus allograft transplantation.

    Science.gov (United States)

    Jeon, Byeongsam; Kim, Jong-Min; Kim, Jong-Min; Lee, Chang-Rack; Kim, Kyung-Ah; Bin, Seong-Il

    2015-05-01

    Osteophytes can be observed on the tibial plateau during meniscus allograft transplantation (MAT). However, no studies to date have evaluated the effect of these osteophytes on meniscus allograft extrusion. Osteophyte excision in the tibial plateau could reduce extrusion of the transplanted meniscus and improve short-term clinical outcomes with meniscus allograft transplantation. Cohort study; Level of evidence, 3. Between October 2004 and July 2012, a total of 323 patients underwent MAT at a single institution. Of these, 88 patients had a peripheral osteophyte in their tibial plateau, and they were enrolled in the study retrospectively. The mean age of the patients was 35.3 years (range, 15-56 years); there were 57 male and 31 female patients. Forty-four patients underwent osteophyte excision concomitantly with MAT and 44 patients underwent MAT only. The 2 groups showed no difference in terms of age, body mass index, time after meniscectomy, and preoperative knee scores. A medial meniscus allograft was transplanted in 13 cases (15%) and a lateral meniscus in 75 (85%). The absolute extrusion and relative percentage of extrusion were measured to evaluate allograft extrusion 12 months after MAT. The modified Lysholm scoring system and the Hospital for Special Surgery score at 2 years after MAT were used to evaluate clinical outcomes. The mean absolute extrusions at 1 year postoperatively in the excision and nonexcision groups were 3.5±1.5 and 5.5±1.6 mm, respectively. The mean relative percentages of extrusion were 34.1%±15.9% and 54.7%±20.7%, respectively. The rates of allograft extrusion (>3 mm) were 28 of 44 (63.6%) and 41 of 44 (93.2%) in the excision and nonexcision groups, respectively. The intergroup differences in absolute extrusion, relative percentage of extrusion, and rate of allograft extrusion were statistically significant (P<.001 for all 3 parameters). There were no significant differences in the clinical outcomes (modified Lysholm or Hospital of

  11. Reduction of Fumonisin Toxicity by Extrusion and Nixtamalization (Alkaline Cooking).

    Science.gov (United States)

    Voss, Kenneth; Ryu, Dojin; Jackson, Lauren; Riley, Ronald; Gelineau-van Waes, Janee

    2017-08-23

    Fumonisins are mycotoxins found in corn. They are toxic to animals and cause cancer in rodents and neural tube defects in LM/Bc mice. Reducing their concentrations in corn-based foods is therefore desirable. Chemical analysis or in vitro bioassays of food extracts might not detect toxic fumonisin reaction products that are unknown or unextractable from food matrices, thus potentially underestimating in vivo toxicity. The effectiveness of two common cooking methods, extrusion and nixtamalization (alkaline cooking), to reduce the toxicity of fumonisin-contaminated corn grits (extrusion) and whole kernel corn (nixtamalization) was shown by means of rat feeding bioassays using fumonisin-specific kidney effects as indicators of potential toxicity. A third bioassay showed that in contrast to fumonisin B 1 (FB 1 ), hydrolyzed fumonisin B 1 (HFB 1 ; formed from FB 1 during nixtamalization) did not cause neural tube defects in LM/Bc mice. The findings indicate that extrusion and nixtamalization reduce the potential toxicity of FB 1 -contaminated corn.

  12. Inductive ingot heating for extrusion press applications; Induktive Bolzenerwaermung fuer Strangpressanwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Beer, Stefan [I.A.S. Induktions-Anlagen + Service GmbH und Co. KG, Iserlohn (Germany)

    2013-03-15

    Inductive heating of large-format aluminium ingots on modern extrusion press lines generates significant process-engineering benefits. In addition, the proportion of special alloys processed is continuously increasing, accompanied simultaneously by ever smaller production batches, both of which are factors necessitating improvement of and greater flexibility in process-cycle control. This report examines a system concept recently commissioned on one of the world's largest aluminium extrusion presses. (orig.)

  13. Radiology seminars using teaching kits

    International Nuclear Information System (INIS)

    Munro, T.G.

    1989-01-01

    Clinco-radiological seminars are an effective method of teaching medical students. However, in busy departments it is often difficult to provide enough radiologists for small group instruction. This can be facilitated by the use of prepared teaching kits. Each kit contains a set of duplicated films and a syllabus which gives a short clinical history for each patient and a series of questions to be used to direct the discussion. Each diagnostic problem is chosen to demonstrate core material. We have been using these teaching kits for organ system teaching in the preclerkship year. Teaching kits offer several advantages. They make it easier to recruit seminar leaders through efficient use of their time. The use of duplicated films and a syllabus ensures that all students cover the same material. The syllabus can be used to generate examination questions for reinforcement of important concepts. The kits are also available to students to review alone and can be readily updated as required

  14. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  15. FEM simulation of friction testing method based on combined forward rod-backward can extrusion

    DEFF Research Database (Denmark)

    Nakamura, T; Bay, Niels; Zhang, Z. L

    1997-01-01

    A new friction testing method by combined forward rod-backward can extrusion is proposed in order to evaluate frictional characteristics of lubricants in forging processes. By this method the friction coefficient mu and the friction factor m can be estimated along the container wall and the conical...... curves are obtained by rigid-plastic FEM simulations in a combined forward rod-backward can extrusion process for a reduction in area R-b = 25, 50 and 70 percent in the backward can extrusion. It is confirmed that the friction factor m(p) on the punch nose in the backward cart extrusion has almost...... in a mechanical press with aluminium alloy A6061 as the workpiece material and different kinds of lubricants. They confirm the analysis resulting in reasonable values for the friction coefficient and the friction factor....

  16. Analysis and modeling of hot extrusion die for its service life enhancement

    Science.gov (United States)

    Akhtar, Syed Sohail

    Aluminum extrusion finds extensive application in the construction, automobile and aerospace industries. High pressures, elevated temperatures, complex and intricate section geometries lead to repeated mechanical and thermal stresses in the die and affiliated tooling. Product rework and rejects can be traced back to various defects spread over the die life cycle: die design, die manufacture and heat treatment, process parameters, inprocess die maintenance/correction and, billet type and quality. Therefore, improved and efficient service life of die and related tooling used in the extrusion press is one the most important factors in maximizing productivity and minimizing cost for ensuring the economical efficiency of an aluminum extrusion plant. How often a die has to be scrapped and replaced with a new one directly contributes to the commercial viability of producing a certain profile. The focus of the current work is on three distinct yet inter-related studies pertaining to the improvement of aluminum extrusion die. Study-A (Die Failure Analysis) is an investigation of various modes and critical failure types based on industrial data (Chapter-2 ), examination of failed dies and finite element simulation for identification of critical process parameters and design features in die fatigue-life (Chapter-3). In Study-B (Die Surface Hardening Treatment), two-stage controlled gas nitriding process for H13 steel is evaluated, both experimentally and numerically, in terms of nitrided case morphology and properties (Chapter-4) followed by experimental and numerical investigation of the effects of repeated nitriding (Chapter-5), pre-nitriding surface preparation (Chapter-6) and die profile geometry (Chapter-7) on nitriding performance in regard to die service life. In Study-C (Effect of Billet Quality on Die Life), the effect of billet quality and related influencing extrusion parameters on the die service life is investigated based on industrial data and some regression

  17. Evaluation of hands-on seminar for reduced port surgery using fresh porcine cadaver model

    Directory of Open Access Journals (Sweden)

    Saseem Poudel

    2016-01-01

    Full Text Available Background: The use of various biological and non-biological simulators is playing an important role in training modern surgeons with laparoscopic skills. However, there have been few reports of the use of a fresh porcine cadaver model for training in laparoscopic surgical skills. The purpose of this study was to report on a surgical training seminar on reduced port surgery using a fresh cadaver porcine model and to assess its feasibility and efficacy. Materials and Methods: The hands-on seminar had 10 fresh porcine cadaver models and two dry boxes. Each table was provided with a unique access port and devices used in reduced port surgery. Each group of 2 surgeons spent 30 min at each station, performing different tasks assisted by the instructor. The questionnaire survey was done immediately after the seminar and 8 months after the seminar. Results: All the tasks were completed as planned. Both instructors and participants were highly satisfied with the seminar. There was a concern about the time allocated for the seminar. In the post-seminar survey, the participants felt that the number of reduced port surgeries performed by them had increased. Conclusion: The fresh cadaver porcine model requires no special animal facility and can be used for training in laparoscopic procedures.

  18. Evaluation of hands-on seminar for reduced port surgery using fresh porcine cadaver model.

    Science.gov (United States)

    Poudel, Saseem; Kurashima, Yo; Shichinohe, Toshiaki; Kitashiro, Shuji; Kanehira, Eiji; Hirano, Satoshi

    2016-01-01

    The use of various biological and non-biological simulators is playing an important role in training modern surgeons with laparoscopic skills. However, there have been few reports of the use of a fresh porcine cadaver model for training in laparoscopic surgical skills. The purpose of this study was to report on a surgical training seminar on reduced port surgery using a fresh cadaver porcine model and to assess its feasibility and efficacy. The hands-on seminar had 10 fresh porcine cadaver models and two dry boxes. Each table was provided with a unique access port and devices used in reduced port surgery. Each group of 2 surgeons spent 30 min at each station, performing different tasks assisted by the instructor. The questionnaire survey was done immediately after the seminar and 8 months after the seminar. All the tasks were completed as planned. Both instructors and participants were highly satisfied with the seminar. There was a concern about the time allocated for the seminar. In the post-seminar survey, the participants felt that the number of reduced port surgeries performed by them had increased. The fresh cadaver porcine model requires no special animal facility and can be used for training in laparoscopic procedures.

  19. Fiscal 1999 technical survey report. Basic survey for energy consumption rationalization and cooperative project on energy conservation seminar; 1999 nendo energy shohi koritsuka kiso chosa oyobi sho energy seminar kyoryoku jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-06-01

    A survey was conducted of Myanmar's energy-consuming industries for exploring the feasibility of introducing practical energy conservation techniques and facilities to this country and for collecting basic data for the implementation of the project in the future. On the other hand, some lecturers were dispatched to an energy conservation seminar which was held in cooperation with the Government of Myanmar. Visited during the basic survey were (1) the Kyan Gin plant of Myanmar Ceramic Enterprise representing Myanmar's cement making industry, (2) the Thanlyin plant of Myanmar Petrochemical Enterprise representing Myanmar's oil refining industry, and (3) the Siftong plant of Myanmar Paper and Chemical Enterprise representing Myanmar's paper making industry. In the study of energy conservation measures for which stabilization of operation through reinforced facility maintenance and management were required, it was concluded that much time was necessary before Japan's advanced energy conservation technologies might be introduced into Myanmar. Three to six propositions were presented to each of the three plants. At the seminar, the importance of energy conservation promoting measures and the results of the basic survey were introduced to the audience. A lecture meeting was also held to familiarize some participants with NEDO-DB (Database of New Energy and Industrial Technology Development Organization). (NEDO)

  20. Hydrodynamic modelling of hydrostatic magnesium extrusion

    NARCIS (Netherlands)

    Moodij, Ellen; de Rooij, Matthias B.; Schipper, Dirk J.

    2006-01-01

    Wilson’s hydrodynamic model of the hydrostatic extrusion process is extended to meet the geometry found on residual billets. The transition from inlet to work zone of the process is not considered sharp as in the model of Wilson but as a rounded edge, modelled by a parabolic function. It is shown

  1. A Series of Seminars about NICE Environment during May / June 2004

    CERN Multimedia

    2004-01-01

    Recently deployed at CERN, Windows XP and Office 2003 offer new functionalities. IT/IS Group has prepared a series of seminars to both introduce the CERN NICE environment to beginners and also to show how to benefit from the advanced features offered by the new versions of Windows and Office. Particular attention will be paid to Collaborative Tasks, like reviewing a document, planning a meeting and to Mobile Computing like working offline, remotely accessing CERN resources, etc.. Seminar planned for this week is: Make Office documents with Windows Word 2003 and Excel 2003 (EN), Thursday 17 June, 14:00 (special time). The seminars will take place in the IT Auditorium (bldg. 31, 3-005) and last for about one hour plus questions. No registration is necessary. More information is available at http://cern.ch/Win/Seminars/Tutorials. Interested users can also have a look to courses offered by CERN Technical Training, at http://cern.ch/humanresources/external/training/tech/office/te_office.asp.

  2. The 1993 Finnish Interdisciplinary Seminar on SETI - A review of aims, approaches and conclusions

    Science.gov (United States)

    Seppanen, Jouko

    1993-10-01

    The communications of the International Interdisciplinary Seminar on SETI, held on March 6-7, 1993 in Vantaa, Finland, are reviewed and the contents and conclusions of papers summarized. The seminar was organized jointly by the Finnish Artificial Intelligence Society (FAIS), Finnish Astronomical Society, Ursa Astronomical Association and Heureka - The Finnish Science Centre. As the ninth in a series of intelligence-related seminars of FAIS, SETI was chosen as the topic for spring 1993, noting the new ten year NASA SETI program HRMS (High Resolution Micro-wave Survey), commenced on Columbus Day, October 12, 1992. The aims and the interdisciplinary format of the seminar are described, the main results and conclusions of papers are restated, and the seminar publications introduced. The summaries of papers are based on their abstracts and contain excerpts from texts.

  3. Proceedings of the 3rd seminar of R and D on advanced ORIENT (International)

    International Nuclear Information System (INIS)

    Sasaki, Yuji; Ozawa, Masaki

    2010-03-01

    The 3rd Seminar of R and D on advanced ORIENT (International) was held at Tohoku University, on October 30th, 2009 organized by Japan Atomic Energy Agency. The first meeting of this seminar was held at Oarai, Ibaraki on May, 2007, and the second seminar was held at Tokai, Ibaraki on November, 2008. This seminar has the world-wide concept and includes the main topics from foreign researchers. Spent nuclear fuel should be recognized not only mass of radioactive elements but also potentially useful materials including platinum metals and rare earth elements. Taking the cooperation with universities related companies and research institutes, into consideration, we aimed at expanding and progressing the basic researches. This report records abstracts and figures submitted from the oral speakers in this seminar. (author)

  4. Characterisation of the wall-slip during extrusion of heavy-clay products

    Science.gov (United States)

    Kocserha, I.; Gömze, A. L.; Kulkov, S.; Kalatur, E.; Buyakova, S. P.; Géber, R.; Buzimov, A. Y.

    2017-01-01

    During extrusion through the extrusion die, heavy-clay compounds are usually show plug flow with extensive slip at the wall of the die. In this study, the viscosity and the thickness of the slip layer were investigated. For the examination a brick-clay from Malyi (Hungary) deposit was applied as a raw material. The clay was characterised by XRPD, BET, SEM and granulometry. As the slip layer consists of suspension of the fine clay fraction so the clay minerals content of the clay (dviscosity of suspension with different water content was measured by means of rotational viscosimeter. The thickness of the slip layer was calculated from the measured viscosity and other data obtained from an earlier study with capillary rheometer. The calculated thickness value showed a tendency to reach a limit value by increasing the extrusion speed.

  5. Seminar on the Professions and Public Life (Washington, DC, June 1998).

    Science.gov (United States)

    London, Scott

    This seminar brought together professionals from three fields--higher education, philanthropy and journalism. Discussed at the seminar was the role that these professions play in public life. It was noted that there is increasing dismay over the public's declining trust in America's institutions. Professional reform efforts to remedy this…

  6. Contingency planning for oil spill response: A program of joint IMO/oil industry regional seminars

    International Nuclear Information System (INIS)

    Bavister, R.; Wonham, J.

    1993-01-01

    Cooperative efforts between the oil industry and governments at the national and local levels have resulted in a series of reports for both technical and general audiences on subjects relating to oil spills, as well as an ongoing series of government/industry regional seminars for senior executives. The seminars emphasize the crucial importance of joint government/industry attention to contingency planning. These activities, which are continuing, are organized under the auspices of an International Petroleum Industry Environmental Conservation Association working group, and the International Maritime Organization. Feedback is solicited from seminar participants for use in planning further seminars and to give the IMO a clear picture of follow up activities that have resulted from the seminars

  7. Microstructure and properties of ultrafine grain nickel 200 after hydrostatic extrusion processes

    Science.gov (United States)

    Sitek, R.; Krajewski, C.; Kamiński, J.; Spychalski, M.; Garbacz, H.; Pachla, W.; Kurzydłowski, K. J.

    2012-09-01

    This paper presents the results of the studies of the structure and properties of ultrafine grained nickel 200 obtained by hydrostatic extrusion processes. Microstructure was characterized by means of optical microscopy and electron transmission microscopy. Corrosion resistance was studied by impedance and potentiodynamic methods using an AutoLab PGSTAT 100 potentiostat in 0.1 M Na2SO4 solution and in acidified (by addition of H2SO4) 0.1 M NaCl solution at pH = 4.2 at room temperature. Microhardness tests were also performed. The results showed that hydrostatic extrusion produces a heterogeneous, ultrafine-grained microstructure in nickel 200. The corrosive resistance tests showed that the grain refinement by hydrostatic extrusion is accompanied by a decreased corrosive resistance of nickel 200.

  8. Experimental and finite element analyses of plastic deformation behavior in vortex extrusion

    International Nuclear Information System (INIS)

    Shahbaz, M.; Pardis, N.; Kim, J.G.; Ebrahimi, R.; Kim, H.S.

    2016-01-01

    Vortex extrusion (VE) is a single pass severe plastic deformation (SPD) technique which can impose high strain values with almost uniform distribution within cross section of the processed material. This technique needs no additional facilities for installation on any conventional extrusion equipment. In this study the deformation behavior of material during VE is investigated and the results are compared with those of conventional extrusion (CE). These investigations include finite element analysis, visioplasticity, and microstructural characterization of the processed samples. The results indicate that the VE process can accumulate a higher strain value by applying an additional torsional deformation. The role of this additional deformation mode on the microstructural evolution of the VE sample is discussed and compared with the results obtained on the CE samples.

  9. Seminar on Usher's Syndrome: Proceedings.

    Science.gov (United States)

    Rochester School for the Deaf, NY.

    Summarized are the presentation of M. Vernon and the Comments of primary panelists from a seminar on Usher's Syndrome, a genetic disease involving congenital deafness and progressive loss of vision due to retinitis pigmentosa. The following topics are addressed: genetics today, nature of Usher's Syndrome, symptoms, prevalence, lay diagnosis for…

  10. Continuously graded extruded polymer composites for energetic applications fabricated using twin-screw extrusion processing technology

    Science.gov (United States)

    Gallant, Frederick M.

    A novel method of fabricating functionally graded extruded composite materials is proposed for propellant applications using the technology of continuous processing with a Twin-Screw Extruder. The method is applied to the manufacturing of grains for solid rocket motors in an end-burning configuration with an axial gradient in ammonium perchlorate volume fraction and relative coarse/fine particle size distributions. The fabrication of functionally graded extruded polymer composites with either inert or energetic ingredients has yet to be investigated. The lack of knowledge concerning the processing of these novel materials has necessitated that a number of research issues be addressed. Of primary concern is characterizing and modeling the relationship between the extruder screw geometry, transient processing conditions, and the gradient architecture that evolves in the extruder. Recent interpretations of the Residence Time Distributions (RTDs) and Residence Volume Distributions (RVDs) for polymer composites in the TSE are used to develop new process models for predicting gradient architectures in the direction of extrusion. An approach is developed for characterizing the sections of the extrudate using optical, mechanical, and compositional analysis to determine the gradient architectures. The effects of processing on the burning rate properties of extruded energetic polymer composites are characterized for homogeneous formulations over a range of compositions to determine realistic gradient architectures for solid rocket motor applications. The new process models and burning rate properties that have been characterized in this research effort will be the basis for an inverse design procedure that is capable of determining gradient architectures for grains in solid rocket motors that possess tailored burning rate distributions that conform to user-defined performance specifications.

  11. Extrusion Process by Finite Volume Method Using OpenFoam Software

    International Nuclear Information System (INIS)

    Matos Martins, Marcelo; Tonini Button, Sergio; Divo Bressan, Jose; Ivankovic, Alojz

    2011-01-01

    The computational codes are very important tools to solve engineering problems. In the analysis of metal forming process, such as extrusion, this is not different because the computational codes allow analyzing the process with reduced cost. Traditionally, the Finite Element Method is used to solve solid mechanic problems, however, the Finite Volume Method (FVM) have been gaining force in this field of applications. This paper presents the velocity field and friction coefficient variation results, obtained by numerical simulation using the OpenFoam Software and the FVM to solve an aluminum direct cold extrusion process.

  12. 34 CFR 664.11 - What is a short-term seminar project?

    Science.gov (United States)

    2010-07-01

    ... short-term seminar project is— (a) Designed to help integrate international studies into an institution... 34 Education 3 2010-07-01 2010-07-01 false What is a short-term seminar project? 664.11 Section 664.11 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF...

  13. 75 FR 51243 - Aluminum Extrusions from the People's Republic of China: Postponement of Preliminary...

    Science.gov (United States)

    2010-08-19

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-570-967] Aluminum Extrusions from the... Department of Commerce (``the Department'') initiated an antidumping duty investigation on Aluminum... Aluminum Extrusions from the People's Republic of China: Initiation of Antidumping Duty Investigation, 75...

  14. Dimensional accuracy of aluminium extrusions in mechanical calibration

    Science.gov (United States)

    Raknes, Christian Arne; Welo, Torgeir; Paulsen, Frode

    2018-05-01

    Reducing dimensional variations in the extrusion process without increasing cost is challenging due to the nature of the process itself. An alternative approach—also from a cost perspective—is using extruded profiles with standard tolerances and utilize downstream processes, and thus calibrate the part within tolerance limits that are not achievable directly from the extrusion process. In this paper, two mechanical calibration strategies for the extruded product are investigated, utilizing the forming lines of the manufacturer. The first calibration strategy is based on global, longitudinal stretching in combination with local bending, while the second strategy utilizes the principle of transversal stretching and local bending of the cross-section. An extruded U-profile is used to make a comparison between the two methods using numerical analyses. To provide response surfaces with the FEA program, ABAQUS is used in combination with Design of Experiment (DOE). DOE is conducted with a two-level fractional factorial design to collect the appropriate data. The aim is to find the main factors affecting the dimension accuracy of the final part obtained by the two calibration methods. The results show that both calibration strategies have proven to reduce cross-sectional variations effectively form standard extrusion tolerances. It is concluded that mechanical calibration is a viable, low-cost alternative for aluminium parts that demand high dimensional accuracy, e.g. due to fit-up or welding requirements.

  15. 77 FR 74466 - Aluminum Extrusions From the People's Republic of China: Notice of Court Decision Not in Harmony...

    Science.gov (United States)

    2012-12-14

    ... DEPARTMENT OF COMMERCE International Trade Administration [C-570-968] Aluminum Extrusions From the... countervailing duty (CVD) investigation of aluminum extrusions from the People's Republic of China (PRC) \\1... Aluminum Extrusions From the People's Republic of China: Final Affirmative Countervailing Duty...

  16. Peaceful uses of nuclear energy. Address at the regional public information seminar, Bangkok, 1 February 2000

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2000-01-01

    In his address at the Regional Public Information Seminar (Bangkok, 1 February 2000), the Director General of the IAEA offered a global perspective on the development of nuclear energy at the beginning of the 21st century. The views expressed are from the vantage point of the IAEA, and are structured around the three pillars of Agency's work: nuclear technology, nuclear and radiation safety, and security of material and safeguards

  17. Status seminar `98: Solar-supported district heating with seasonal heat storage. Status report `98; Status-Seminar `98: Solarunterstuetzte Nahwaermeversorgung - Saisonale Waermespeicherung. Statusbericht `98

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This status report refers to the BMBF (Federal Ministry for Education, Science, Research and Technology) status seminar: Solar-assisted district heat supply - seasonal heat storage that took place in Neckarsulm on 19th and 20th May. 1998. The report contains the reference papers and the status reports of all projects supported under the Ministry`s SOLARTHERMIE programme that have already been finished or are still running. (orig.) [Deutsch] Der vorliegende Statusbericht wird anlaesslich des BMBF-Statusseminars: Solarunterstuetzte Nahwaermeversorgung - Saisonale Waermespeicherung am 19. und 20. Mai 1998 in Neckarsulm herausgegeben. Der Bericht enthaelt neben den Tagungsbeitraegen auch die Sachstandsberichte aller Projekte, die zu diesem Thema in den letzten Jahren von BMBF in dem Programm SOLARTHERMIE-2000 bereits abgeschlossen wurden oder z.Zt. gefoerdert werden. (orig.)

  18. Friction phenomena in hydrostatic extrusion of magnesium

    NARCIS (Netherlands)

    Moodij, Ellen

    2014-01-01

    When magnesium is hydrostatically extruded an inconsistent and sometimes bad surface quality is encountered. In hydrostatic extrusion the billet is surrounded by a lubricant, usually castor oil. The required pressure to deform the material is applied onto this lubricant and not directly to the

  19. Debris extrusion by glide-path establishing endodontic instruments with different geometries

    Directory of Open Access Journals (Sweden)

    Jung-Hong Ha

    2016-06-01

    Conclusion: Creating the glide-path using nickel-titanium rotary files produced lower amounts of debris extrusion than using manual stainless-steel files. The progressive taper design of ProGlider, the center-off cross-section of One G, and the alternative-pitch design of ScoutRace may have increased the efficiencies of debris removal with minimal extrusion during glide-path preparation. Glide-path preparation using NiTi rotary files have better clinical efficiency than the manual stainless-steel file.

  20. Concept Feasibility Report for Using Co-Extrusion to Bond Metals to Complex Shapes of U-10Mo

    Energy Technology Data Exchange (ETDEWEB)

    Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smith, Mark T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Soulami, Ayoub [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joshi, Vineet V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-12-01

    In support of the Convert Program of the U.S. Department of Energy’s National Nuclear Security Administration (DOE/NNSA) Global Threat Reduction Initiative (GTRI), Pacific Northwest National Laboratory (PNNL) has been investigating manufacturing processes for the uranium-10% molybdenum (U-10Mo) alloy plate fuel for the U.S. high-performance research reactors (USHPRR). This report documents the results of PNNL’s efforts to develop the extrusion process for this concept. The approach to the development of a co-extruded complex-shaped fuel has been described and an extrusion of DU-10Mo was made. The initial findings suggest that given the extrusion forces required for processing U-10Mo, the co-extrusion process can meet the production demands of the USHPRR fuel and may be a viable production method. The development activity is in the early stages and has just begun to identify technical challenges to address details such as dimensional tolerances and shape control. New extrusion dies and roll groove profiles have been developed and will be assessed by extrusion and rolling of U-10Mo during the next fiscal year. Progress on the development and demonstration of the co-extrusion process for flat and shaped fuel is reported in this document

  1. Effect of extrusion conditions on the physico-chemical properties and in vitro protein digestibility of canola meal.

    Science.gov (United States)

    Zhang, Bo; Liu, Guo; Ying, Danyang; Sanguansri, Luz; Augustin, Mary Ann

    2017-10-01

    Canola meal has potential as a high protein food ingredient. The extrusion-induced changes in color, pH, extractable protein and in vitro protein digestibility of canola meal under different extrusion conditions was assessed. The extrusion barrel moisture (24%, 30% or 36%) and screw kneading block length (0, 30 or 60mm) were used as independent process parameters. Extrusion at high barrel moisture (36%) favored protein aggregation resulting in lower extractable protein compared to extrusion at the lowest barrel moisture (24%). At lower barrel moisture contents (24% and 30%), a longer kneading block length increased extractable protein but this was not the case at 36% barrel moisture. Canola protein digestibility was improved upon extrusion at 30% barrel moisture but there was no significant change at lower (24%) or higher (36%) barrel moisture. The kneading block length of the screw had no significant effect on the canola protein digestibility within the same barrel moisture level. The relationship between the physico-chemical parameters and in vitro digestibility was examined. This study highlighted the complex interplay of extrusion processing variables that affect protein degradation and the interaction of components, with consequent effects on protein digestibility. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications.

    Science.gov (United States)

    Placone, Jesse K; Engler, Adam J

    2018-04-01

    Additive manufacturing, or 3D printing, has become significantly more commonplace in tissue engineering over the past decade, as a variety of new printing materials have been developed. In extrusion-based printing, materials are used for applications that range from cell free printing to cell-laden bioinks that mimic natural tissues. Beyond single tissue applications, multi-material extrusion based printing has recently been developed to manufacture scaffolds that mimic tissue interfaces. Despite these advances, some material limitations prevent wider adoption of the extrusion-based 3D printers currently available. This progress report provides an overview of this commonly used printing strategy, as well as insight into how this technique can be improved. As such, it is hoped that the prospective report guides the inclusion of more rigorous material characterization prior to printing, thereby facilitating cross-platform utilization and reproducibility. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Forward impact extrusion of surface textured steel blanks using coated tooling

    Science.gov (United States)

    Hild, Rafael; Feuerhack, Andreas; Trauth, Daniel; Arghavani, Mostafa; Kruppe, Nathan C.; Brögelmann, Tobias; Bobzin, Kirsten; Klocke, Fritz

    2017-10-01

    A method to enable dry metal forming by the means of a self-lubricating coating and surface textures was researched using an innovative Pin-On-Cylinder-Tribometer. The experimental analysis was complemented by a numerical model of the complex contact conditions between coated tools and the surface textured specimen at the micro-level. Based on the results, the explanation of the tribological interactions between surface textured specimens and the tool in dry full forward extrusion is the objective of this work. Therefore, experimental dry extrusion tests were performed using a tool system. The extruded specimens were evaluated regarding their geometry as well as by the required punch force. Thereby, the effectiveness and the feasibility of dry metal forming on the example of full forward extrusion was evaluated. Thus, one more step towards the technical realization of dry metal forming of low alloy steels under industrial conditions was realized.

  4. Investigation of the process energy demand in polymer extrusion: A brief review and an experimental study

    International Nuclear Information System (INIS)

    Abeykoon, Chamil; Kelly, Adrian L.; Brown, Elaine C.; Vera-Sorroche, Javier; Coates, Phil D.; Harkin-Jones, Eileen; Howell, Ken B.; Deng, Jing; Li, Kang; Price, Mark

    2014-01-01

    Highlights: • Energy consumption and losses in polymer extrusion are discussed. • This compares energy consumption in polymer extrusion at different conditions. • The role of power factor on energy efficiency in polymer extrusion is explored. • Empirical models on extruder energy consumption are provided. • Computer modelling of energy consumption of polymer extrusion is performed. - Abstract: Extrusion is one of the fundamental production methods in the polymer processing industry and is used in the production of a large number of commodities in a diverse industrial sector. Being an energy intensive production method, process energy efficiency is one of the major concerns and the selection of the most energy efficient processing conditions is a key to reducing operating costs. Usually, extruders consume energy through the drive motor, barrel heaters, cooling fans, cooling water pumps, gear pumps, etc. Typically the drive motor is the largest energy consuming device in an extruder while barrel/die heaters are responsible for the second largest energy demand. This study is focused on investigating the total energy demand of an extrusion plant under various processing conditions while identifying ways to optimise the energy efficiency. Initially, a review was carried out on the monitoring and modelling of the energy consumption in polymer extrusion. Also, the power factor, energy demand and losses of a typical extrusion plant were discussed in detail. The mass throughput, total energy consumption and power factor of an extruder were experimentally observed over different processing conditions and the total extruder energy demand was modelled empirically and also using a commercially available extrusion simulation software. The experimental results show that extruder energy demand is heavily coupled between the machine, material and process parameters. The total power predicted by the simulation software exhibits a lagging offset compared with the

  5. Visits Service Launches New Seminar Series

    CERN Multimedia

    2001-01-01

    The CERN Visits Service is launching a new series of seminars for guides, and they are open to everyone. The series kicks off next week with a talk by Konrad Elsener on the CERN neutrinos to Gran Sasso, CNGS, project.

  6. GammaSem Proceedings. A Nordic seminar for users of gamma spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Straalberg, E. (ed.) (Institute for Energy Technolgy (Norway)); Berg, K. (National Institute of Radiation Protection (Denmark)); Dowdall, M. (Norwegian Radiation Protection Authority (Norway)) (and others)

    2010-11-15

    The project GammaSem was proposed to the NKS in 2008. The aim of the project was to arrange two seminars for users of gamma spectrometry, in 2009 and 2010. The seminars were meant to provide a forum for discussions and sharing of information on practical issues concerning gamma spectrometry and initiate a network of gamma spectrometry users in the Nordic countries. Such a Nordic network should strengthen the collaboration between laboratories and improve all participants' competence in practical gamma spectrometry. Both seminars' focus was practical challenges met by the users themselves, rather than theoretical matters. Scientists and users of gamma spectrometry from all five Nordic countries were invited to the seminar, as well as scientist from the Baltic countries. A total of 65 people signed up for GammaSem 2010; representing 30 different universities, commercial companies, research institutes and authorities. The working group concept as presented at last year's GammaSem, has not worked out as intended. The reason for this is probably because most of the laboratories that signed up to join the working groups, signed up because they wanted to learn more about the different subjects. In combination with the fact that no funding was made available for the working groups, it was difficult to establish goals on what to achieve. None of the working groups applied for funding from the NKS (or elsewhere) to establish separate projects. There is a big need for more cooperation and for training within the field of gamma spectrometry. This fact has been proved through these two seminars, both by the many different topics that have been discussed, but also by the huge interest for participating in the suggested series of workshop. The GammaSem seminars have thus provided a much welcomed starting point for a broader Nordic collaboration. (Author)

  7. GammaSem Proceedings. A Nordic seminar for users of gamma spectrometry

    International Nuclear Information System (INIS)

    Straelberg, E.; Berg, K.; Dowdall, M.

    2010-11-01

    The project GammaSem was proposed to the NKS in 2008. The aim of the project was to arrange two seminars for users of gamma spectrometry, in 2009 and 2010. The seminars were meant to provide a forum for discussions and sharing of information on practical issues concerning gamma spectrometry and initiate a network of gamma spectrometry users in the Nordic countries. Such a Nordic network should strengthen the collaboration between laboratories and improve all participants' competence in practical gamma spectrometry. Both seminars' focus was practical challenges met by the users themselves, rather than theoretical matters. Scientists and users of gamma spectrometry from all five Nordic countries were invited to the seminar, as well as scientist from the Baltic countries. A total of 65 people signed up for GammaSem 2010; representing 30 different universities, commercial companies, research institutes and authorities. The working group concept as presented at last year's GammaSem, has not worked out as intended. The reason for this is probably because most of the laboratories that signed up to join the working groups, signed up because they wanted to learn more about the different subjects. In combination with the fact that no funding was made available for the working groups, it was difficult to establish goals on what to achieve. None of the working groups applied for funding from the NKS (or elsewhere) to establish separate projects. There is a big need for more cooperation and for training within the field of gamma spectrometry. This fact has been proved through these two seminars, both by the many different topics that have been discussed, but also by the huge interest for participating in the suggested series of workshop. The GammaSem seminars have thus provided a much welcomed starting point for a broader Nordic collaboration. (Author)

  8. Shuttle Primary Reaction Control Subsystem Thruster Fuel Valve Pilot Seal Extrusion: A Failure Correlation

    Science.gov (United States)

    Waller, Jess; Saulsberry, Regor L.

    2003-01-01

    Pilot operated valves (POVs) are used to control the flow of hypergolic propellants monomethylhydrazine (fuel) and nitrogen tetroxide (oxidizer) to the Shuttle orbiter Primary Reaction Control Subsystem (PRCS) thrusters. The POV incorporates a two-stage design: a solenoid-actuated pilot stage, which in turn controls a pressure-actuated main stage. Isolation of propellant supply from the thruster chamber is accomplished in part by a captive polytetrafluoroethylene (PTFE) pilot seal retained inside a Custom 455.1 stainless steel cavity. Extrusion of the pilot seal restricts the flow of fuel around the pilot poppet, thus impeding or preventing the main valve stage from opening. It can also prevent the main stage from staying open with adequate force margin, particularly if there is gas in the main stage actuation cavity. During thruster operation on-orbit, fuel valve pilot seal extrusion is commonly indicated by low or erratic chamber pressure or failure of the thruster to fire upon command (Fail-Off). During ground turnaround, pilot seal extrusion is commonly indicated by slow gaseous nitrogen (GN2) main valve opening times (greater than 38 ms) or slow water main valve opening response times (greater than 33 ms). Poppet lift tests and visual inspection can also detect pilot seal extrusion during ground servicing; however, direct metrology on the pilot seat assembly provides the most quantitative and accurate means of identifying extrusion. Minimizing PRCS fuel valve pilot seal extrusion has become an important issue in the effort to improve PRCS reliability and reduce associated life cycle costs.

  9. Proceedings of the summary seminar within the NKS-B programme 2002-2005[Radioecology

    Energy Technology Data Exchange (ETDEWEB)

    Ilus, E [Radiation and Nuclear Safety Authority, STUK (Finland)

    2006-04-15

    This report contains the proceedings of the NKS-B Summary Seminar held on 24-25 October 2005 in Tartu, Estonia. The aim of the seminar was to provide a forum for presenting and discussing the results obtained in the NKS-B programme during the project period 2002 - 2005. The main attention was focused on radioecology and measurement techniques including presentations on the work done in the Projects INDOFERN (New Indicator Organisms for Environmental Radioactivity), LABINCO (Intercomparison of Laboratory Analyses of Radionuclides in Environmental Samples) and ECODOSES (Improving Radiological Assessments of Doses to Humans from Terrestrial Ecosystems). The total number of presentations in the seminar was 27. The seminar was also the final seminar of the four-year INDOFERN Project. The objective of the project was to identify new indicator organisms and biomarkers for assessment of environmental radioactivity in normal and emergency situations. The goal was to search new useful organisms accumulating effectively and specifically certain radionuclides in various Nordic ecosystems (forest, fresh water, marine), and to compare their indicator value to those of the earlier known indicators. The project yielded new data on the occurrence and transport of radionuclides in a wide scale of Nordic ecosystems. A summary of the whole project, and summaries of the work done in all the participating laboratories were presented in 13 presentations in the seminar.

  10. Physical and mathematical modelling of extrusion processes

    DEFF Research Database (Denmark)

    Arentoft, Mogens; Gronostajski, Z.; Niechajowics, A.

    2000-01-01

    The main objective of the work is to study the extrusion process using physical modelling and to compare the findings of the study with finite element predictions. The possibilities and advantages of the simultaneous application of both of these methods for the analysis of metal forming processes...

  11. Extrusion of ECC: Recent Developments and Applications

    DEFF Research Database (Denmark)

    Stang, Henrik; Fredslund-Hansen, Helge; Puclin, Tony

    2008-01-01

    process. Extrusion of cementitious (fiber reinforced) materials has proven particularly difficult due to the high inter-particle friction combined with the disastrous effect of static zones in the flow pattern, and to the ease of phase migration or separation. In order to deal with these conflicting...

  12. Hot melt extrusion versus spray drying: hot melt extrusion degrades albendazole.

    Science.gov (United States)

    Hengsawas Surasarang, Soraya; Keen, Justin M; Huang, Siyuan; Zhang, Feng; McGinity, James W; Williams, Robert O

    2017-05-01

    The purpose of this study was to enhance the dissolution properties of albendazole (ABZ) by the use of amorphous solid dispersions. Phase diagrams of ABZ-polymer binary mixtures generated from Flory-Huggins theory were used to assess miscibility and processability. Forced degradation studies showed that ABZ degraded upon exposure to hydrogen peroxide and 1 N NaOH at 80 °C for 5 min, and the degradants were albendazole sulfoxide (ABZSX), and ABZ impurity A, respectively. ABZ was chemically stable following exposure to 1 N HCl at 80 °C for one hour. Thermal degradation profiles show that ABZ, with and without Kollidon ® VA 64, degraded at 180 °C and 140 °C, respectively, which indicated that ABZ could likely be processed by thermal processing. Following hot melt extrusion, ABZ degraded up to 97.4%, while the amorphous ABZ solid dispersion was successfully prepared by spray drying. Spray-dried ABZ formulations using various types of acids (methanesulfonic acid, sulfuric acid and hydrochloric acid) and polymers (Kollidon ® VA 64, Soluplus ® and Eudragit ® E PO) were studied. The spray-dried ABZ with methanesulfonic acid and Kollidon ® VA 64 substantially improved non-sink dissolution in acidic media as compared to bulk ABZ (8-fold), physical mixture of ABZ:Kollidon ® VA 64 (5.6-fold) and ABZ mesylate salt (1.6-fold). No degradation was observed in the spray-dried product for up to six months and less than 5% after one-year storage. In conclusion, amorphous ABZ solid dispersions in combination with an acid and polymer can be prepared by spray drying to enhance dissolution and shelf-stability, whereas those made by melt extrusion are degraded.

  13. Study on Hot Deformation Behavior of 7085 Aluminum Alloy during Backward Extrusion Process

    Directory of Open Access Journals (Sweden)

    R. B. Mei

    2015-01-01

    Full Text Available Compression test was carried out and the true stress-strain curves were obtained from the hot compression of 7085 alloy. A numerical simulation on the deformation behavior of 7085 aluminum alloy during the backward extrusion was also performed by finite element method. The results show that dynamic recrystallization occurs in the hot compression of 7085 alloy and the peak stress reaches higher values as the strain rate increases and deformation temperature decreases. The backward extrusion processes include contact deformation, initial deformation, and steady deformation. Severe plastic deformation of shear and compression occurs when the metal flowed into the channel between fillet of punch and wall of die so that the grain size can be refined by backward extrusion. The deformation in the region of top of wall is too small to meet the mechanical properties of requirements and the metal usually needs to be trimmed. The experiments with the same parameters as simulation had been carried out and the experimental cup after extrusion has better quality.

  14. Plasticized chitosan/polyolefin films produced by extrusion.

    Science.gov (United States)

    Matet, Marie; Heuzey, Marie-Claude; Ajji, Abdellah; Sarazin, Pierre

    2015-03-06

    Plasticized chitosan and polyethylene blends were produced through a single-pass extrusion process. Using a twin-screw extruder, chitosan plasticization was achieved in the presence of an acetic acid solution and glycerol, and directly mixed with metallocene polyethylene, mPE, to produce a masterbatch. Different dilutions of the masterbatch (2, 5 and 10 wt% of plasticized chitosan), in the presence of ethylene vinyl acetate, EVA, were subsequently achieved in single screw film extrusion. Very small plasticized chitosan domains (number average diameter <5 μm) were visible in the polymeric matrix. The resulting films presented a brown color and increasing haze with chitosan plasticized content. Mechanical properties of the mPE films were affected by the presence of plasticized chitosan, but improvement was observed as a result of some compatibility between mPE and chitosan in the presence of EVA. Finally the incorporation of plasticized chitosan affected mPE water vapor permeability while oxygen permeability remained constant. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. PREPARATION FOR RETIREMENT - AVS SEMINAR

    CERN Multimedia

    Social Service

    2001-01-01

    The 500 or so participants in the fifth Preparation for Retirement seminar held at the end of March were unfortunately deprived of the planned session on the AVS due to the unavailability of the Director of the Caisse Cantonale Genevoise de Compensation (CCGC). We have since had formal confirmation that because of an extra workload due to important changes in the Swiss tax and social legislation and the implementation this summer of the maternity insurance in Geneva, the CCGC has suspended its participation in preparation for retirement seminars in the international organisations for the time being. Conscious of the necessity of offering a session dedicated to the AVS, it is with pleasure that we can inform you that one of our legal advisers, Mr Lorenz Stampfli, has accepted to lead this session. In order to allow for adequate preparation we have reserved the following date: Wednesday 26 September from 14.00 to 16.00 in the Main Amphitheatre The session will be open to all people already registered and any o...

  16. TECHNICAL TRAINING SEMINAR: National Instruments

    CERN Multimedia

    Monique Duval

    2004-01-01

    From 9:30 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Data acquisition systems on PCs, industrial measurement and control techniques, advanced LabVIEW software and PXI instrumentation, and system components for tests and automation will be presented. Walk-in courses will address DIAdem, LabVIEW and data acquisition. Language: English and French Free seminars and courses, no registration Organisers: Rolf Stampfli / IT-CO / 78102 & 160367 / Rolf.Stampfli@cern.ch Davide Vitè / HR-PMD-ATT / 75141 Davide.Vite@cern.ch For more information and the complete event programme, please visit the...

  17. Third Finnish-German seminar on nuclear waste management 1986

    International Nuclear Information System (INIS)

    Lamberg, L.

    1988-01-01

    The scope of the seminar was to provide an interdisciplinary forum for exchange of information and experiences in the field of nuclear waste management. The highlights of the seminar focused on the following topics: overall reviews, waste products, nearfield phenomena, site investigations, performance assessment and decommissioning. All together 20 papers were presented. Reviews, status reports and experimental studies dealt with general research programs and current research and development activities including regulatory aspects. Extensive discussions provided and opportunity to identify issues and options for further research

  18. Back extrusion of vocadlo-type fluids

    Czech Academy of Sciences Publication Activity Database

    David, Jiří; Filip, Petr; Kharlamov, Alexander

    2013-01-01

    Roč. 23, č. 4 (2013), , 45366-1-45366-8 ISSN 1430-6395 R&D Projects: GA ČR GA103/09/2066 Institutional support: RVO:67985874 Keywords : viscosity * back extrusion * annular pumping * vocadlo model * Robertson-stiff model Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.592, year: 2013 http://www.ar.ethz.ch/TMPPDF/23840225602.368/ApplRheol_23_45366.pdf

  19. Preparation and Evaluation of Pellets Using Acacia and Tragacanth by Extrusion-Spheronization

    OpenAIRE

    S. Pirmoradi; M R. Abbaspour; A. Akhgari

    2011-01-01

    Background and the purpose of the study: Extrusion-spheronization is an established technique for the production of pellets for pharmaceutical applications. In this study, the feasibility and influence of the incorporation of acacia, by itself and in combination with tragacanth, on the ability of formulations containing 2 model of drugs (ibuprofen and theophylline) to form spherical pellets by extrusion-spheronization was investigated.Material and Methods: Formulations containing different ra...

  20. Japanese experiences in human resources development in the nuclear fields and proposal on procedure of the 1st seminar

    International Nuclear Information System (INIS)

    Murao, Yoshio

    2000-01-01

    The Atomic Energy Basic Act was enforced in 1956. The law prescribed establishment of the Atomic Energy Commission (establishment of the Nuclear Safety Commission was added in 1978), definition of administrative bodies for nuclear fuel materials and reactors and radiation protection, and necessary regulatory laws. The law also prescribed establishment of a national nuclear center for R and D and human resources development, i.e. Japan Atomic Energy Research Institute (JAERI) was established in 1956. The Nuclear Technology and Education Center (NuTEC) RI school was opened in 1958. Establishments of Power Reactor and Nuclear Fuel Development Corporation and National Institute of Radiological Science were in 1956 and 1957, respectively. In universities, nuclear facilities were constructed for supplying young human resources based on decision by Ministry of Education after 1961. The foundation of Japan Atomic Energy Power Co. (JAPCO) was in 1957. In the NuTEC, a variety of training courses had been prepared and carried out to meet the requirements of the nuclear community. Many leaders and experts had been produced and they worked for development of nuclear infrastructure in Japan. International training programs were started in 1985 and the experiences were applied for helping Asian countries to develop the manpower for nuclear infrastructure. Japanese safety actions for nuclear technology had strongly depended on that of USA. Therefore, much efforts on safety evaluation and phenomenological understanding are necessary in Japan. Recent tendency is changed from development-minded approach to safety-minded approach and is focused more on efforts to get public consent on nuclear energy. However, Japanese experiences will be useful for developing human resources in other countries. The NuTEC of JAERI will operate the seminar once a year. The seminar will be implemented; to get mutual recognition on present status and problems of regional countries by gathering information

  1. Final report from the NKS NordThreat seminar in Asker

    Energy Technology Data Exchange (ETDEWEB)

    Eikelmann, I M.H.; Selnaes, OE G [eds.; Norwegian Radiation Protection Authority (Norway)

    2009-11-15

    Changes in the international security environment have lead to an increased attention towards the need to revise various threat assessments in the Nordic countries. Together with recent events such as incidents at Nordic nuclear power plants, orphan sources and accidents involving nuclear powered vessels, this has given a good opportunity for an exchange of information and opinions. The NKS-B NordThreat seminar took place at Sem gjestegaard in Asker outside Oslo, Norway on 30 - 31 October 2008. Main topics in the seminar were: 1) National threat assessments 2) Potential hazards 3) Experience from previous incidents 4) Public perception of nuclear and radiological threats and information challenges 5) Challenges for future preparedness. There were about 40 participants at the seminar. These were mainly members of the NKS organisations, invited speakers and representatives from various Norwegian emergency preparedness organisations. (author)

  2. Root resorption after orthodontic intrusion and extrusion:.

    NARCIS (Netherlands)

    Han, G.; Huang, S.; Hoff, J.W. Von den; Zeng, X.; Kuijpers-Jagtman, A.M.

    2005-01-01

    The aim of this investigation was to compare root resorption in the same individual after application of continuous intrusive and extrusive forces. In nine patients (mean age 15.3 years), the maxillary first premolars were randomly intruded or extruded with a continuous force of 100 cN for eight

  3. Debris extrusion and foraminal deformation produced by reciprocating instruments made of thermally treated NiTi wires.

    Science.gov (United States)

    Frota, Myrna Maria Arcanjo; Bernardes, Ricardo Affonso; Vivan, Rodrigo Ricci; Vivacqua-Gomes, Nilton; Duarte, Marco Antonio Hungaro; Vasconcelos, Bruno Carvalho de

    2018-01-18

    To evaluate the amount of apically extruded debris, percentage of foraminal enlargement and apical foramen (AF) deformation that occurred during root canal preparation with different reciprocation systems: Reciproc, WaveOne (M-Wire), and ProDesign R (Shape Memory Technology Wire) at two different working lengths (WLs): 0.0 and 1.0 mm beyond the AF. The AF of 120 root canals in 60 mesial roots of mandibular molars were photographed with stereomicroscope and randomly assigned into four groups: manual, Reciproc (REC), WaveOne (WO), and ProDesign R (PDR); subsequently, they were further subdivided according to the WL (n=15). Teeth were instrumented, coupled to a dual collecting chamber, and then another photograph of each AF was captured. Extrusion was analysed by determining the weight of extruded debris. Each AF diameter was measured in pre- and post-instrumentation images to determine deformation, which was analysed, and afterwards the final format of AFs was classified (circular/oval/deformed). We found no significant differences when analysing each system at different WLs. When considering each WL, REC and WO showed highest extrusion values (P<.05); for AF enlargement, differences were observed only for WO, when it was used beyond the AF; differences were observed among M-Wire groups beyond the AF (P<.05). AF deformation was observed in all groups; PDR showed the lowest AF deformation values at both WLs; M-Wire groups showed 50% strain beyond the AF. Authors concluded that beyond the apical limit, the alloy and taper are important aspects when considering extrusion and deformation.

  4. Lateral extrusion of Tunisia : Contribution of Jeffara Fault (southern branch) and Petroleum Implications

    Science.gov (United States)

    Ghedhoui, R.; Deffontaines, B.; Rabia, M. C.

    2012-04-01

    Contrasting to the northward African plate motion toward Eurasia and due to its geographic position in the North African margin, since early cretaceous, Tunisia seems to be submitted to an eastward migration. The aim of this work is to study the southern branch of this inferred tectonic splay that may guide the Tunisian extrusion characterised to the east by the Mediterranean sea as a free eastern boundary. The Jeffara Fault zone (southern Tunisia), represent a case example of such deformation faced by Tunisia. Helped by the results of previous researchers (Bouaziz, 1995 ; Rabiaa, 1998 ; Touati et Rodgers, 1998 ; Sokoutis D. et al., 2000 ; Bouaziz et al., 2002 ; Jallouli et al., 2005 ; Deffontaines et al., 2008…), and new evidences developed in this study, we propose a geodynamic Tunisian east extrusion model, due to such the northern African plate migration to the Eurasian one. In this subject, structural geomorphology is undertaken herein based on both geomorphometric drainage network analysis (Deffontaines et al., 1990), the Digital Terrain Model photo-interpretation (SRTM) combined with photo-interpretation of detailed optical images (Landsat ETM+), and confirmed by field work and numerous seismic profiles at depth. All these informations were then integrated within a GIS (Geodatabase) (Deffontaines 1990 ; Deffontaines et al. 1994 ; Deffontaines, 2000 ; Slama, 2008 ; Deffontaines, 2008) and are coherent with the eastern extrusion of the Sahel block. We infer that the NW-SE Gafsa-Tozeur, which continue to the Jeffara major fault zone acting as a transtensive right lateral motion since early cretaceous is the southern branch of the Sahel block extrusion. Our structural analyses prove the presence of NW-SE right lateral en-echelon tension gashes, NW-SE aligned salt diapirs, numerous folds offsets, en-echelon folds, and so on that parallel this major NW-SE transtensive extrusion fault zone.These evidences confirm the fact that the NW-SE Jeffara faults correspond

  5. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Projects for international research exchanges and international seminars; 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo chosa hokokusho. Kokusai kenkyu koryu jigyo / kokusai seminar kaisai jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the international research exchange projects promoted by Research Institute of Innovative Technology for the Earth (RITE) in FY 2000. The international research exchanges are important for creation of new research areas and technological systems for solving the global environmental problems. In order to promote these activities, RITE invites and dispatches researchers to international conferences and symposiums, promotes research exchanges with major foreign research institutes and academic organizations, and invites and dispatches researchers for medium to long periods. These projects promote exchanges of the latest researches with various institutes, both domestic and foreign, and confirm that the research and development projects now RITE is promoting are closely related to those promoted by various organizations. In the FY 2000, RITE invites 5 foreign researchers for joint researches, and invites 3 foreign researchers to international conferences. RITE also dispatches 3 Japanese researchers to American and European universities, and 12 Japanese researchers to international conferences and the like, to effectively promote the domestic researches and grasp development tendencies at institutes of various countries. RITE holds 5 international seminars for exchanging and discussing broad topics over advanced researches related to global environmental technologies by researchers, both domestic and foreign. (NEDO)

  6. Effects of extrusion variables on the properties of waxy hulless barley extrudates.

    Science.gov (United States)

    Köksel, Hamit; Ryu, Gy-Hyung; Başman, Arzu; Demiralp, Hande; Ng, Perry K W

    2004-02-01

    The objective of this research was to investigate the extrudability of waxy hulless barley flour under various extrusion conditions. Waxy hulless barley flour was processed in a laboratory-scale corotating twin-screw extruder with different levels of feed moisture content (22.3, 26.8, and 30.7%) and die temperature (130, 150, and 170 degrees C) to develop a snack food with high beta-glucan content. The effects of extrusion condition variables (screw configuration, moisture, and temperature) on the system variables (pressure and specific mechanical energy), the extrudate physical properties (sectional expansion index, bulk density), starch gelatinization, pasting properties (cold peak viscosity, trough viscosity, and final viscosity), and beta-glucan contents were determined. Results were evaluated by using response surface methodology. Increased extrusion temperature and feed moisture content resulted in decreases in exit die pressure and specific mechanical energy values. For extrudates extruded under low shear screw configuration (LS), increased barrel temperature decreased sectional expansion index (SEI) values at both low and high moisture contents. The feed moisture seems to have an inverse relationship with SEI over the range studied. Bulk density was higher at higher moisture contents, for both low and high barrel temperatures, for samples extruded under high shear screw configuration (HS) and LS. Cold peak viscosities (CV) were observed in all samples. The CV increased with the increase in extrusion temperature and feed moisture content. Although beta-glucan contents of the LS extrudates were comparable to that of barley flour sample, HS samples had generally lower beta-glucan contents. The extrusion cooking technique seems to be promising for the production of snack foods with high beta-glucan content, especially using LS conditions.

  7. Effect of extrusion process on the functional properties of high amylose corn starch edible films and its application in mango (Mangifera indica L.) cv. Tommy Atkins.

    Science.gov (United States)

    Calderón-Castro, Abraham; Vega-García, Misael Odín; de Jesús Zazueta-Morales, José; Fitch-Vargas, Perla Rosa; Carrillo-López, Armando; Gutiérrez-Dorado, Roberto; Limón-Valenzuela, Víctor; Aguilar-Palazuelos, Ernesto

    2018-03-01

    Starch is an attractive raw material as ingredient for edible film manufacture because of its low cost, abundant availability, renewability, and biodegradability. Nevertheless, starch based films exhibit several disadvantages such as brittleness and poor mechanical and barrier properties, which restrict its application for food packaging. The use of the extrusion technology as a pretreatment of the casting technique to change the starch structure in order to obtain edible films, may constitute an alternative to generate coatings with good functional properties and maintain longer the postharvest quality and shelf life of fruits. For this reason, the objective of this study was to optimize the conditions of an extrusion process to obtain a formulation of modified starch to elaborate edible films with good functional properties using the casting technique and assess the effect during the storage when applied on a model fruit. The best conditions of the extrusion process and concentration of plasticizers were obtained using response surface methodology. From optimization study, it was found that appropriate conditions to obtain starch edible films with the best mechanical and barrier properties were an extrusion temperature of 100 °C and a screw speed of 120 rpm, while the glycerol content was 16.73%. Also, once applied in fruit, the loss of quality attributes was diminished.

  8. Dental witness seminars: dentistry in the UK since 1948.

    Science.gov (United States)

    Wilson, N H F; Gelbier, S

    2016-02-12

    Witness seminars attempt to get behind the scenes of advances and developments to find out what really happened at certain times; they are not intended to provide a detailed history of events. This paper presents highlights from the five John McLean Archive witness seminars, providing an instructional collection of memories and insights into the world of dentistry in the UK since the late 1940s. It is concluded that future change will be seen as a welcome constant to be used for the benefit of the profession and the patients and communities it serves.

  9. The Impact of the Summer Seminar Program on Midshipman Performance: Does Summer Seminar Participation Influence Success at the Naval Academy?

    National Research Council Canada - National Science Library

    Norton, Michael

    2004-01-01

    .... Based on this literature, it is theorized that Summer Seminar program participation will be positively correlated to increased graduation rates and increased academic cumulative quality point ratings...

  10. Eyewear Computing – Augmenting the Human with Head-mounted Wearable Assistants (Dagstuhl Seminar 16042)

    OpenAIRE

    Bulling, Andreas; Cakmakci, Ozan; Kunze, Kai; Rehg, James M.

    2016-01-01

    The seminar was composed of workshops and tutorials on head-mounted eye tracking, egocentric vision, optics, and head-mounted displays. The seminar welcomed 30 academic and industry researchers from Europe, the US, and Asia with a diverse background, including wearable and ubiquitous computing, computer vision, developmental psychology, optics, and human-computer interaction. In contrast to several previous Dagstuhl seminars, we used an ignite talk format to reduce the time of talks to...

  11. Abstracts of the International seminar 'Experimental possibilities of KTM tokamak and research programme'

    International Nuclear Information System (INIS)

    2005-01-01

    The International seminar 'Experimental possibilities of KTM tokamak and research programme' was held in 10-12 October 2005 in Astana city (Kazakhstan). The seminar was dedicated to problems of KTM tokamak commissioning. The Collection of abstracts comprises 45 papers

  12. PREFACE: National Seminar on Current Trends in Materials Science (CTMS-2011)

    Science.gov (United States)

    Jayakrishnan, R.; Vijayakumar, K. P.; Unnikrishnan, N. V.

    2013-05-01

    : Materials Science and Engineering. This initiative is in pursuit of the vision of the department to establish itself as a part of the global scientific community. The department is striving to establish itself as a centre of excellence in teaching and research. We sincerely hope that the papers published in this journal will contribute to the advancement of knowledge in the respective fields. We present this volume of papers to the scientific community for their valuable feedback by way of suggestions and collaborative research. Acknowledgment The Department of Physics, Christian College Chengannur acknowledges the efforts of Dr Jacob George who was inspirational in organizing this seminar. His vision and perseverance made it possible for us to organize this event. The seminar was graciously funded by University Grants Commission (UGC), New Delhi, India and Kerala State Council for Science Technology and Environment (KSCSTE), Thiruvananthapuram, Kerala, India. The department wishes to thank both organizations for their support for the event. The management of the college provided great assistance by providing all the infrastructural help required for the event. The department is weighed in gratitude for this gesture and encouragement. Ammini Solar Pvt. Ltd, and Hind High Vacuum Pvt. Ltd, sponsored the best paper award and best poster award respectively. We thank them for this token of their support for the event. The event will be remembered for the participants who arrived from various parts India and the students who made it memorable. The Department acknowledges the efforts of the 2010-2012 and 2009-2011post graduate students who ran the show behind the scenes. National Advisory Board Professor (Dr) K L Chopra (Padamshree) (Former Director, Indian Institute of Technology, Kharagpur) Professor A K Barua (Padamshree) Project Director, MNES/DST project on a-Si Solar cell Professor C Vijayan IIT, Madras Dr M K Jayaraj, Cochin University of Science and technology Dr P Kurian

  13. Efektivitas Seminar pada Perubahan Sikap Ibu dalam Pemberian Dukungan Nutrisi dan Stimulasi selama Pemantauan Tumbuh Kembang

    Directory of Open Access Journals (Sweden)

    Soedjatmiko Soedjatmiko

    2018-03-01

    Hasil. Terdapat 617 ibu yang mengisi lengkap kuesioner yang diberikan dalam seminar. Terjadi peningkatan yang bermakna (beda mean -0,15±0,26;95%CI -0,17sampai-0,13; p<0,001 pada rerata skor sikap ibu setelah mengikuti seminar yang diadakan oleh peneliti. Sumber informasi yang penting dan berkesan, antara lain, televisi, gawai, media sosial, tenaga kesehatan, dan seminar oleh tenaga kesehatan. Kesimpulan. Pemberian seminar oleh tenaga kesehatan mengubah sikap ibu pada pengasuhan anak selama pemantauan tumbuh kembang dengan efektif (p<0,001.

  14. Nuclear energy and natural environment. Information seminar

    International Nuclear Information System (INIS)

    1994-01-01

    The material of the Jadwisin 93' seminar is the collection 20 of 19 articles discussing aspects of the subject of nuclear energy and natural environment. The lectures were presented at six sessions: 1) Nuclear energy applications in medicine, agriculture, industry, food preservation and protection of the environment; 2) Nuclear power in the world; 3) Public attitudes towards different energy options, the example of Sweden; 4) Nuclear power in neighbouring countries; 5) Radiation and human health; 6) Radioactive waste management and potential serious radiological hazards. The general conclusion of the seminar can be as follows. In some cases the nuclear power is a source of environment pollution but very often nuclear techniques are now used and certainly more often in the future will be used for environment and human health protection

  15. Short-course Astronomical Research Seminars for High School and College Students

    Science.gov (United States)

    Johnson, Jolyon

    2011-05-01

    Since 2008, I have helped lead several short-course astronomical research seminars with Russell M. Genet. These seminars have ranged from semester-long courses at Cuesta College in San Luis Obispo, California to long weekends at the University of Oregon's Pine Mountain Observatory. Each seminar is led by an experienced observer or group of observers who guide high school and college students through the scientific process from observations to publication. The students (anywhere from half a dozen to twenty in number) participate in and contribute to every step. Being a coauthor on one or more research papers offers students an advantage on college and scholarship applications. Similarly, graduate schools often prefer students with research experience. Many topics of research are appropriate for these short-courses including variable star, exoplanet, and asteroid photometry. However, the most successful topic has been visual double stars because the observations required are straitforward and the equipment is relatively inexpensive. The Journal of Double Star Observations is also welcoming of student research and provides swift publication. A detailed description of the short-course seminars can be found in the recent Collins Foundation Press volume titled Small Telescopes and Astronomical Research.

  16. Management of vaginal extrusion after tension-free vaginal tape procedure for urodynamic stress incontinence.

    Science.gov (United States)

    Giri, Subhasis K; Sil, Debasri; Narasimhulu, Girish; Flood, Hugh D; Skehan, Mark; Drumm, John

    2007-06-01

    To report our experience in the management of vaginal extrusion after the tension-free vaginal tape (TVT) procedure for urodynamic stress incontinence. Five patients diagnosed with vaginal extrusion after a TVT procedure performed at our institution were identified. We reviewed the patients' records retrospectively. The interval from TVT placement to diagnosis, presenting symptoms and signs, duration of symptoms, diagnostic test findings, treatment, and postoperative results were recorded. Patients were followed up for at least 12 months. From January 2001 to June 2004, a total of 166 patients underwent the TVT procedure. Of these, 5 patients (3%) were diagnosed with isolated vaginal extrusion 4 to 40 months postoperatively. No cases of urethral or bladder erosion occurred in this series. The symptoms included vaginal discharge, pain, bleeding, and dyspareunia. The eroded margin of the vaginal mucosa was trimmed, mobilized, and closed over the tape with interrupted vertical mattress sutures in a single layer using 2-0 polyglactin 910 to avoid mucosal inversion. All patients remained symptom free without any evidence of defective healing or additional extrusion at a minimal follow-up of 12 months. Primary reclosure of the vaginal mucosa over the TVT tape is an effective first-line treatment option for vaginal extrusion without compromising continence. Patients undergoing the TVT procedure should be adequately counseled about the possibility of this complication and the available treatment options.

  17. Geneva University - Next Particle Physics Seminars

    CERN Multimedia

    Université de Genève

    2010-01-01

    GENEVA UNIVERSITY École de physique Département de physique nucléaire et corspusculaire 24, quai Ernest-Ansermet 1211 GENEVA 4 Tel. (022) 379 62 73 Fax (022) 379 69 92 Wednesday 17 November 2010 PARTICLE PHYSICS SEMINAR at 17-00 hrs – Stückelberg Auditorium Results on CP-Violation in The B_s and B_d systems at the Tevatron Dr. Iain Bertram, Lancaster Results will be presented from the investigation of CP-violation in B mesons at the Tevatron. The evidence for an anomalous likes-sign dimuon charge asymmetry will be presented, along with the latest results on CP violation in the Bs -> J/Psi Phi system. The implications of these results and the possibility of confirming them in the future will also be discussed. Information : http://dpnc.unige.ch/seminaire/annonce.html Organizer : G. Pasztor Wednesday 1st December 2010 PARTICLE PHYSICS SEMINAR at 17-00 hrs – Stückelberg Auditorium PAMELA - A COSMIC RAY OBSERVATO...

  18. Engineering Integration: Building a Quick and Effective Faculty Seminar

    Directory of Open Access Journals (Sweden)

    Kate Peterson

    2012-12-01

    Full Text Available In the spring of 2010, the Science & Engineering Library of the University of Minnesota-Twin Cities partnered with the Information Literacy Librarian and offered a faculty seminar to the College of Science and Engineering. The seminar’s goals included 1. refreshing and expanding faculty’s knowledge of information and 21st century literacies and 2. creating a community of faculty committed to developing student skills in finding, evaluating and synthesizing information in their academic coursework and into their professional careers. Overall, the seminar increased faculty understanding of services and expertise of the libraries, and 21st century literacies. It also developed and strengthened ties between individual faculty members and their subject librarians, leading to a mix of outcomes from a faculty member partnering on a grant the Libraries applied for to course integrated instruction sessions to faculty participating in an e-textbook pilot. This seminar provides a strong model for re-framing information literacy in the context of teaching and learning in science and engineering, giving librarians an opportunity to strengthen relationships and increase liaison effectiveness.

  19. Management & Communication: Programme of Seminars September to December 2004

    CERN Multimedia

    Nathalie Dumeaux

    2004-01-01

    Situation : 13.07.2004 Bilingual seminars Dates Days Places Available Project Management 13, 14, 15 September 3 oui Introduction to Management 20, 21, 22 September 3 oui Managing by project 28, 29 September 2 oui Project Management Case study 8 October 1 oui Communication Techniques - 1 20, 21, 22 October 3 oui Quality Management 8, 9 November 2 oui Risk Management 6, 7 December 2 oui Seminars in English Communicating effectively 20 September, 1 october + 2, 3 November 4 yes Communicating effectively in your team 14, 15 October 2 yes Séminaires en Français Communiquer efficacement 21, 22 septembre + 12, 13 octobre 4 oui Techniques d'exposé et de présentation 27, 28 septembre + 18 octobre 3 oui Animer ou participer à une réunion de travail 15, 16, 17 novembre 3 oui * If you are interested in a seminar where there are no places available, please fill in an application form and we will contact you as soon as a new session is organised. MANAGEMENT & COMMUNICA...

  20. Radiological Protection in Nuclear Programmes in Latin America. Proceedings of a Regional Seminar

    International Nuclear Information System (INIS)

    1979-05-01

    The growth of nuclear power projected both in the industrial and developing Member States of the IAEA raises many problems which can be solved only by international collaboration. The present regional seminar was organized with the objective of bringing together radiological protection specialists from the Latin American countries to discuss recent advances in radiological protection of nuclear workers, the population and the environment around nuclear installations.The seminar was organized by the IAEA in collaboration with the Government of Venezuela and took place on 21-25 November 1977 in Caracas. The participants came from 10 countries and the United Nations Development Organisation (UNDP), the Pan-American Health Organization (PAHO) and the Organization of American States (OAS) were represented. One of the main tasks of the seminar was the identification of those local or regional problems which might be solved through international collaboration. Therefore, all of these notes and proposals were reflected and summarized in the chapter entitled ''Notes and Recommendations of the Participants''. It was also felt that the seminar had an educational, or training character, as many participants expressed the view that great differences exist in the organizational, instrumental and legislative levels of the radiation protection facilities provided, and thus the seminar provided an opportunity to exchange views, information and ideas on these subjects. As this seminar proved to be very useful and successful, special emphasis was put on the recommendation that similar meetings should be organized every two or three years. In this report the papers are reproduced as presented at the sessions. As the discussions following the papers contained only a few further clarifications on the data presented, no detailed list of questions and answers is included in this report. One of the main tasks of the seminar was the identification of those local or

  1. Content analysis of medical students’ seminars: a unique method of analyzing clinical thinking

    Science.gov (United States)

    2013-01-01

    Background The study of communication skills of Asian medical students during structured Problem-based Learning (PBL) seminars represented a unique opportunity to assess their critical thinking development. This study reports the first application of the health education technology, content analysis (CA), to a Japanese web-based seminar (webinar). Methods The authors assigned twelve randomly selected medical students from two universities and two clinical instructors to two virtual classrooms for four PBL structured tutoring sessions that were audio-video captured for CA. Both of the instructors were US-trained physicians. This analysis consisted of coding the students’ verbal comments into seven types, ranging from trivial to advanced knowledge integration comments that served as a proxy for clinical thinking. Results The most basic level of verbal simple responses accounted for a majority (85%) of the total students’ verbal comments. Only 15% of the students’ comments represented more advanced types of critical thinking. The male students responded more than the female students; male students attending University 2 responded more than male students from University 1. The total mean students’ verbal response time for the four sessions with the male instructor was 6.9%; total mean students’ verbal response time for the four sessions with the female instructor was 19% (p student clinical training webinar in two Japanese medical schools. These results are preliminary, mostly limited by a small sample size (n = 12) and limited time frame (four sessions). CA technology has the potential to improve clinical thinking for medical students. This report may stimulate improvements for implementation. PMID:24289320

  2. Suspension tests on a larger scale. Report from the status seminar on magnetic suspension techniques. Testing of the electrodynamic system started

    Energy Technology Data Exchange (ETDEWEB)

    Rogg, D; Muckli, W

    1976-07-01

    A world record speed for electromagnetically suspended vehicles as well as successful suspension tests with forced-circulation cooled superconducting magnets were the outstanding success reports at the fifth status seminar 'Magnetic suspension techniques' on 31st March and 1st April in Bad Kissingen. The research work on magnetic suspension techniques in the railborne long-distance travel is supported by the Federal Ministry of Research and Technology (BMFT) within the frameworke of the programme 'Railway engineering - New technologies'.

  3. First-year seminar intervention: Enhancing firstyear mathematics ...

    African Journals Online (AJOL)

    First-year seminar intervention: Enhancing firstyear mathematics performance at ... South Africa has opened up access to higher education over the past 20 years. ... The research question that this paper addresses is: What is the relationship ...

  4. COMPUTER MODELING IN DEFORM-3D FOR ANALYSIS OF PLASTIC FLOW IN HIGH-SPEED HOT EXTRUSION OF BIMETALLIC FORMATIVE PARTS OF DIE TOOLING

    Directory of Open Access Journals (Sweden)

    I. V. Kachanov

    2015-01-01

    Full Text Available The modern development of industrial production is closely connected with the use of science-based and high technologies to ensure competitiveness of the manufactured products on the world market. There is also much tension around an energy- and resource saving problem which can be solved while introducing new technological processes and  creation of new materials that provide productivity increase through automation and improvement of tool life. Development and implementation of such technologies are rather often considered as time-consuming processes  which are connected with complex calculations and experimental investigations. Implementation of a simulation modelling for materials processing using modern software products serves an alternative to experimental and theoretical methods of research.The aim of this paper is to compare experimental results while obtaining bimetallic samples of a forming tool through the method of speed hot extrusion and the results obtained with the help of computer simulation using DEFORM-3D package and a finite element method. Comparative analysis of plastic flow of real and model samples has shown that the obtained models provide high-quality and reliable picture of plastic flow during high-speed hot extrusion. Modeling in DEFORM-3D make it possible to eliminate complex calculations and significantly reduce a number of experimental studies while developing new technological processes.

  5. Adaptive Control of Freeze-Form Extrusion Fabrication Processes (Preprint)

    National Research Council Canada - National Science Library

    Zhao, Xiyue; Landers, Robert G; Leu, Ming C

    2008-01-01

    Freeze-form Extrusion Fabrication (FEF) is an additive manufacturing process that extrudes high solids loading aqueous ceramic pastes in a layer-by-layer fashion below the paste freezing temperature for component fabrication...

  6. Bidirectional Transfer of DoD Technology: Assessment of Science and Technology Education Applications of DoD Modeling and Simulation Resources

    National Research Council Canada - National Science Library

    Anderson, Rodney

    1996-01-01

    Collection, analysis, and dissemination of modeling and simulation technologies in meetings, seminars, conference, workshops, and reports are key processes in implementation of computer assisted education...

  7. IFLA pimedate raamatukogude sektsiooni seminar / Marja Kivihall

    Index Scriptorium Estoniae

    Kivihall, Marja, 1975-

    2008-01-01

    27.-28. veebruaril 2008 toimus Horvaatia pealinnas Zagrebis IFLA pimedate raamatukogude sektsiooni ja DAISY Konsortsiumi seminar "Putting libraries for the blind and print disabled on the agenda", kus artikli autor Marja Kivihall esines ettekandega Eesti Pimedate Raamatukogust

  8. Plasma Physics. Lectures Presented at the Seminar on Plasma Physics

    International Nuclear Information System (INIS)

    1965-01-01

    The International Seminar on Plasma Physics held in Trieste during 5- 1 October 1964 was the first major activity of the International Atomic Energy Agency's new International Centre for Theoretical Physics. In bringing together plasma physicists belonging to three distinct schools, the American, West European and the Soviet schools, the Seminar provided a unique opportunity for extended contacts between physicists in this field. It is hoped that these Proceedings will be of permanent value in the literature of the subject

  9. Plasma Physics. Lectures Presented at the Seminar on Plasma Physics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1965-06-15

    The International Seminar on Plasma Physics held in Trieste during 5- 1 October 1964 was the first major activity of the International Atomic Energy Agency's new International Centre for Theoretical Physics. In bringing together plasma physicists belonging to three distinct schools, the American, West European and the Soviet schools, the Seminar provided a unique opportunity for extended contacts between physicists in this field. It is hoped that these Proceedings will be of permanent value in the literature of the subject.

  10. [Effect of extrusion on protein and starch bioavailability in corn and lima bean flour blends].

    Science.gov (United States)

    Pérez-Navarrete, Cecilia; Betancur-Ancona, David; Casotto, Meris; Carmona, Andrés; Tovar, Juscelino

    2007-09-01

    Extrusion is used to produce crunchy expanded foods, such as snacks. The nutritional impact of this process has not been studied sufficiently. In this study, in vitro and in vivo protein and starch bioavailability was evaluated in both raw and extruded corn (Zea mays)(C) and lima bean (Phaseolus lunatus)(B) flour blends, prepared in 75C/25B and 50C/ 50B (p/p) proportions. These were processed with a Brabender extruder at 160 degrees C, 100 rpm and 15.5% moisture content. Proximate composition showed that in the extruded products protein and ash contents increased whereas the fat level decreased. In vitro protein digestibility was higher in the extrudates (82%) than in the raw flours (77%). Potentially available starch and resistant starch contents decreased with extrusion. The in vitro assays indicated that extrusion improved protein and starch availability in the studied blends. In vivo bioavailability was evaluated using the rice weevil (Sithophilus oryzae) as a biological model. The most descriptive biomarkers of the changes suggested by the in vivo tests were body protein content (increased by extrusion) and intestinal a-amylase activity (decreased by processing). Overall, results suggest that extrusion notably increases the nutritional quality of corn and lima bean flour blends.

  11. Design of an extrusion screw and solid fuel produced from coconut shell

    Directory of Open Access Journals (Sweden)

    Madhiyanon, T

    2006-03-01

    Full Text Available The objectives were to design an extrusion screw to produce biomass solid fuel in a cold extrusion process, and investigate the effects of molasses used as a selected adhesive on the physical properties of extruded products. The material employed consisted of crushed coconut shell char and coconut fiber char mixed at a ratio of 40:60. The ratios of molasses in the mixture were 10:100, 15:100 and 20:100 (by weight and the extrusion die angles were 1.0, 1.1, 1.2, and 1.3 degrees gradation per experiment. The experimental results showed that the newly designed screw could function properly in the output range 0.75-0.90 kg/min, which is close to the design value. Regarding the molasses's effect on solid fuel properties, increasing the share of molasses was positive for both output and strength of the resulting briquettes, whereas the results of increasing die angle showed decreases in both output and strength. The compressive strength varied between 2.49-2.87 MPa in all circumstances, which was considerably higher than acceptable industrial level. Furthermore, the extruded solid fuel showed excellent resistance to impact force. Regarding energy consumption, the amount of electrical energy used in the extrusion process was insignificant, ranging between 0.040-0.079 kWh/kg.

  12. Report on the seminar on supporting industrial infrastructure requirements and development for nuclear power, Vienna, 14-18 April, 1986

    International Nuclear Information System (INIS)

    1986-04-01

    The Seminar on Supporting Industrial Infrastructure Requirements and Development for Nuclear Power reviewed the following problem areas: establishing the programmatic objectives of a realistic national participation and the technology transfer which would be necessary to qualify such a participation; promoting the level of industrialization which would be necessary to attain the targeted national participation; assuring quality in industry by enforcing comprehensive QA programme; setting-up a national R and D infrastructure to assist the transfer of technology and act as a permanent asset to solve problems as they arise in industry

  13. Proceedings of the 30th Nordic Seminar on Computational Mechanics (NSCM-30)

    DEFF Research Database (Denmark)

    These proceedings contain the papers presented at the 30th Nordic Seminar on Computational Mechanics (NSCM30), held at The Technical University of Denmark (DTU), 25-27 October 2017.......These proceedings contain the papers presented at the 30th Nordic Seminar on Computational Mechanics (NSCM30), held at The Technical University of Denmark (DTU), 25-27 October 2017....

  14. A Comparison of Apical Bacterial Extrusion in Manual, ProTaper Rotary, and One Shape Rotary Instrumentation Techniques.

    Science.gov (United States)

    Mittal, Rakesh; Singla, Meenu G; Garg, Ashima; Dhawan, Anu

    2015-12-01

    Apical extrusion of irrigants and debris is an inherent limitation associated with cleaning and shaping of root canals and has been studied extensively because of its clinical relevance as a cause of flare-ups. Many factors affect the amount of extruded intracanal materials. The purpose of this study was to assess the bacterial extrusion by using manual, multiple-file continuous rotary system (ProTaper) and single-file continuous rotary system (One Shape). Forty-two human mandibular premolars were inoculated with Enterococcus faecalis by using a bacterial extrusion model. The teeth were divided into 3 experimental groups (n = 12) and 1 control group (n = 6). The root canals of experimental groups were instrumented according to the manufacturers' instructions by using manual technique, ProTaper rotary system, or One Shape rotary system. Sterilized saline was used as an irrigant, and bacterial extrusion was quantified as colony-forming units/milliliter. The results obtained were statistically analyzed by using one-way analysis of variance for intergroup comparison and post hoc Tukey test for pair-wise comparison. The level for accepting statistical significance was set at P step-back technique exhibiting significantly more bacterial extrusion than the engine-driven systems. Of the 2 engine-driven systems, ProTaper rotary extruded significantly more bacteria than One Shape rotary system (P engine-driven nickel-titanium systems were associated with less apical extrusion. The instrument design may play a role in amount of extrusion. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  15. MM98.36 Strain Paths in Extrusion

    DEFF Research Database (Denmark)

    Lindegren, Maria; Wiwe, Birgitte; Wanheim, Tarras

    1998-01-01

    The extrusion process has been investigated for different geometries, in order to study the strain path of different material elements during their movements through the plastic zone. This is done by using the FEM code DEFORM and physical simulation with wax togehter with the coefficient method. ....... Calculations of strain paths have also been performed by ABAQUS....

  16. Debris extrusion and foraminal deformation produced by reciprocating instruments made of thermally treated NiTi wires

    Directory of Open Access Journals (Sweden)

    Myrna Maria Arcanjo Frota

    2018-01-01

    Full Text Available Abstract Objective To evaluate the amount of apically extruded debris, percentage of foraminal enlargement and apical foramen (AF deformation that occurred during root canal preparation with different reciprocation systems: Reciproc, WaveOne (M-Wire, and ProDesign R (Shape Memory Technology Wire at two different working lengths (WLs: 0.0 and 1.0 mm beyond the AF. Material and methods The AF of 120 root canals in 60 mesial roots of mandibular molars were photographed with stereomicroscope and randomly assigned into four groups: manual, Reciproc (REC, WaveOne (WO, and ProDesign R (PDR; subsequently, they were further subdivided according to the WL (n=15. Teeth were instrumented, coupled to a dual collecting chamber, and then another photograph of each AF was captured. Extrusion was analysed by determining the weight of extruded debris. Each AF diameter was measured in pre- and post-instrumentation images to determine deformation, which was analysed, and afterwards the final format of AFs was classified (circular/oval/deformed. Results We found no significant differences when analysing each system at different WLs. When considering each WL, REC and WO showed highest extrusion values (P<.05; for AF enlargement, differences were observed only for WO, when it was used beyond the AF; differences were observed among M-Wire groups beyond the AF (P<.05. AF deformation was observed in all groups; PDR showed the lowest AF deformation values at both WLs; M-Wire groups showed 50% strain beyond the AF. Conclusion Authors concluded that beyond the apical limit, the alloy and taper are important aspects when considering extrusion and deformation.

  17. Optimized manufacture of nuclear fuel cladding tubes by FEA of hot extrusion and cold pilgering processes

    Science.gov (United States)

    Gaillac, Alexis; Ly, Céline

    2018-05-01

    Within the forming route of Zirconium alloy cladding tubes, hot extrusion is used to deform the forged billets into tube hollows, which are then cold rolled to produce the final tubes with the suitable properties for in-reactor use. The hot extrusion goals are to give the appropriate geometry for cold pilgering, without creating surface defects and microstructural heterogeneities which are detrimental for subsequent rolling. In order to ensure a good quality of the tube hollows, hot extrusion parameters have to be carefully chosen. For this purpose, finite element models are used in addition to experimental tests. These models can take into account the thermo-mechanical coupling conditions obtained in the tube and the tools during extrusion, and provide a good prediction of the extrusion load and the thermo-mechanical history of the extruded product. This last result can be used to calculate the fragmentation of the microstructure in the die and the meta-dynamic recrystallization after extrusion. To further optimize the manufacturing route, a numerical model of the cold pilgering process is also applied, taking into account the complex geometry of the tools and the pseudo-steady state rolling sequence of this incremental forming process. The strain and stress history of the tube during rolling can then be used to assess the damage risk thanks to the use of ductile damage models. Once validated vs. experimental data, both numerical models were used to optimize the manufacturing route and the quality of zirconium cladding tubes. This goal was achieved by selecting hot extrusion parameters giving better recrystallized microstructure that improves the subsequent formability. Cold pilgering parameters were also optimized in order to reduce the potential ductile damage in the cold rolled tubes.

  18. Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing.

    Science.gov (United States)

    Li, Qijun; Guan, Xiaoying; Cui, Mengsuo; Zhu, Zhihong; Chen, Kai; Wen, Haoyang; Jia, Danyang; Hou, Jian; Xu, Wenting; Yang, Xinggang; Pan, Weisan

    2018-01-15

    Three dimensional (3D) extrusion-based printing is a paste-based rapid prototyping process, which is capable of building complex 3D structures. The aim of this study was to explore the feasibility of 3D extrusion-based printing as a pharmaceutical manufacture technique for the fabrication of gastro-floating tablets. Novel low-density lattice internal structure gastro-floating tablets of dipyridamole were developed to prolong the gastric residence time in order to improve drug release rate and consequently, improve bioavailability and therapeutic efficacy. Excipients commonly employed in the pharmaceutical study could be efficiently applied in the room temperature 3D extrusion-based printing process. The tablets were designed with three kinds of infill percentage and prepared by hydroxypropyl methylcellulose (HPMC K4M) and hydroxypropyl methylcellulose (HPMC E15) as hydrophilic matrices and microcrystalline cellulose (MCC PH101) as extrusion molding agent. In vitro evaluation of the 3D printed gastro-floating tablets was performed by determining mechanical properties, content uniformity, and weight variation. Furthermore, re-floating ability, floating duration time, and drug release behavior were also evaluated. Dissolution profiles revealed the relationship between infill percentage and drug release behavior. The results of this study revealed the potential of 3D extrusion-based printing to fabricate gastro-floating tablets with more than 8h floating process with traditional pharmaceutical excipients and lattice internal structure design. Copyright © 2017. Published by Elsevier B.V.

  19. For information: A Series of Seminars about NICE Environment during May / June 2004

    CERN Multimedia

    2004-01-01

    Recently deployed at CERN, Windows XP and Office 2003 offer new functionalities. IT/IS Group has prepared a series of seminars to both introduce the CERN NICE environment to beginners and also to show how to benefit from the advanced features offered by the new versions of Windows and Office. Particular attention will be paid to Collaborative Tasks, like reviewing a document, planning a meeting and to Mobile Computing like working offline, remotely accessing CERN resources, etc.. The last seminar will be about: Making presentations with Powerpoint 2003 (FR), Tuesday 22nd of June, 14:30. The seminars will take place in the IT Auditorium (bldg. 31, 3-005) and last for about one hour plus questions. No registration is necessary. More information is available at http://cern.ch/Win/Seminars/Tutorials. Interested users can also have a look to courses offered by CERN Technical Training, at http://cern.ch/humanresources/external/training/tech/office/te_office.asp.

  20. Proceedings of the METNET Seminar 2013 in Luleå

    DEFF Research Database (Denmark)

    turbines. Experimetal and computational results were the focus of a paper describing innovative flangeless connections for wind turbine towers. Two papers dealt with the fire limit state. In one paper, numerical results were presented on the increasingly important aspect of columns not exposed to fire...... on all four sides. As a step towards more realistic analysis of structures exposed to fire, a method was presented for the coupling of thermal response and the consequent mechanical response. Problems related to the use of new grades of steel such as S960 were discussed in another paper dealing......, and on a technique for creating and repairing complex machine parts using 3-dimensional laser synthesis technology. Another presentation described recent developments on maintenance-free bolts. METNET seminars deal with not only technical aspects of metal construction, but also issues of concern to industry...

  1. A Novel Continuous Extrusion Process to Fabricate Wedge-Shaped Light Guide Plates

    Directory of Open Access Journals (Sweden)

    Wen-Tse Hsiao

    2013-01-01

    Full Text Available Backlight modules are key components in thin-film transistor liquid crystal displays (TFT-LCD. Among the components of a backlight module, the light guide plate (LGP plays the most important role controlling the light projected to the eyes of users. A wedge-shaped LGP, with its asymmetrical structure, is usually fabricated by an injection proces, but the fabrication time of this process is long. This study proposes a continuous extrusion process to fabricate wedge-shaped LGPs. This continuous process has advantages for mass production. Besides a T-die and rollers, this system also has an in situ monitor of the melt-bank that forms during the extrusion process, helping control the plate thickness. Results show that the melt bank has a close relationship with the plate thickness. The temperature of the bottom heater and roller was adjusted to reduce the surface deformation of the wedge-shaped plate. This continuous extrusion system can successfully manufacture wedge-shaped LGPs for mass production.

  2. GammaSem Proceedings - A Nordic seminar for users of gamma spectrometry

    International Nuclear Information System (INIS)

    Nunez, P.; Klemola, S.; Nielsen, Sven P.; Palsson, S.E.; Israelson, C.

    2010-03-01

    The project GammaSem was proposed to provide a forum for discussions and sharing of information on practical issues concerning gamma spectrometry and to establish a network of users of gamma spectrometry in the Nordic countries, thereby strengthening the collaboration and improving all participants' competence in practical gamma spectrometry. The seminars' focus was practical challenges met by the users themselves, rather than theoretical matters. Scientists and users of gamma spectrometry from all five Nordic countries were invited to the seminar, as well as scientist from the Baltic countries. A total of 75 people participated; representing 34 different universities, commercial companies, research institutes and also all Nordic authorities. During the seminar several key issues for follow-up were identified and working groups for addressing the identified problems were established. The working groups were: 1) Uncertainties and detections of limits 2) True summing coincidence 3) Monte Carlo simulations and efficiency transfer 4) Absorption (density corrections and geometries) 5) Mobile gamma spectrometry systems 6) Nuclear forensics (on special samples and special parts of the spectra). The identified topics will form the basis for the agenda of the next seminar in 2010. There, the different working groups will be invited to present their ideas/solutions to the relevant problems. (author)

  3. GammaSem Proceedings - A Nordic seminar for users of gamma spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Nunez, P. (ed.) (Institute for Energy Technology (IFE) (Norway)); Klemola, S. (Radiation and Nuclear Safety Authority (STUK) (Finland)); Nielsen, Sven P. (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy. Roskilde (Denmark)); Palsson, S.E. (Icelandic Radiation Safety Authority (IS)); Israelson, C. (National Institute of Radiation Protection (Denmark))

    2010-03-15

    The project GammaSem was proposed to provide a forum for discussions and sharing of information on practical issues concerning gamma spectrometry and to establish a network of users of gamma spectrometry in the Nordic countries, thereby strengthening the collaboration and improving all participants' competence in practical gamma spectrometry. The seminars' focus was practical challenges met by the users themselves, rather than theoretical matters. Scientists and users of gamma spectrometry from all five Nordic countries were invited to the seminar, as well as scientist from the Baltic countries. A total of 75 people participated; representing 34 different universities, commercial companies, research institutes and also all Nordic authorities. During the seminar several key issues for follow-up were identified and working groups for addressing the identified problems were established. The working groups were: 1) Uncertainties and detections of limits 2) True summing coincidence 3) Monte Carlo simulations and efficiency transfer 4) Absorption (density corrections and geometries) 5) Mobile gamma spectrometry systems 6) Nuclear forensics (on special samples and special parts of the spectra). The identified topics will form the basis for the agenda of the next seminar in 2010. There, the different working groups will be invited to present their ideas/solutions to the relevant problems. (author)

  4. 75 FR 22109 - Aluminum Extrusions from the People's Republic of China: Initiation of Antidumping Duty...

    Science.gov (United States)

    2010-04-27

    ... Aluminium, Ltd., a producer of aluminum extrusions, for the 2008 2009 fiscal year. See Volume II of the..., produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by The Aluminum Association commencing with the numbers 1, 3, and 6...

  5. The Development and Numerical Analysis of the Conical Radiator Extrusion Process

    Directory of Open Access Journals (Sweden)

    Michalczyk J.

    2017-12-01

    Full Text Available The article presents a newly developed method for single-operation extrusion of conical radiators. This is the author’s radiator manufacturing method being the subject of a patent application. The proposed method enables the manufacture of radiators either with or without an inner opening and with an integral plate. Selected results of numerical computations made within Forge®3D, a finite element method (FEM-based software program, were presented during the analysis of the process. A comparative analysis of the proposed manufacturing method using the double-sided extrusion method was also made.

  6. Final report from the NKS NordThreat seminar in Asker, Norway

    International Nuclear Information System (INIS)

    Eikelmann, I.M.H.; Selnaes, Oe.G.

    2009-11-01

    Changes in the international security environment have lead to an increased attention towards the need to revise various threat assessments in the Nordic countries. Together with recent events such as incidents at Nordic nuclear power plants, orphan sources and accidents involving nuclear powered vessels, this has given a good opportunity for an exchange of information and opinions. The NKS-B NordThreat seminar took place at Sem gjestegaerd in Asker outside Oslo, Norway on 30 - 31 October 2008. Main topics in the seminar were: 1) National threat assessments 2) Potential hazards 3) Experience from previous incidents 4) Public perception of nuclear and radiological threats and information challenges 5) Challenges for future preparedness. There were about 40 participants at the seminar. These were mainly members of the NKS organisations, invited speakers and representatives from various Norwegian emergency preparedness organisations. (author)

  7. Senior Seminar Focusing on Societal Issues Related to Chemistry and Biochemistry

    Science.gov (United States)

    White, Harold B., III; Johnston, Murray V.; Panar, Manuel

    2000-12-01

    The lack of a clearly defined content or structure provided the opportunity to transform a one-credit, pass-fail senior seminar course into a meaningful capstone experience for chemistry and biochemistry majors. In addition to individual and class exercises associated with employment, graduate school, communication skills, and professional ethics, small groups of students worked together to create informative Web sites that took positions on important societal issues related to chemistry. Each group presented a seminar and responded to questions from their peers and two or more unannounced visitors, "wild cards" who often had expertise in the seminar topic. Throughout the course, the instructors placed particular emphasis on developing students' ability to work cooperatively, locate and evaluate information, make informed judgments based on available information, and logically develop and defend their positions. Input from a retired industrial chemist helped define these skill elements.

  8. Numerical Studies of Low Cycle Fatigue in Forward Extrusion Dies

    DEFF Research Database (Denmark)

    Pedersen, Thomas Ø

    2000-01-01

    of describing the elastic-plastic material behaviour under cyclic loadings is used to study the effects of different pre-stressing concepts on the accumulation of plastic strain and the development of fatigue damage. The results show, that the accumulation of plastic strain in the critical region can......Forward extrusion dies typically fail due to transverse fatigue cracks or wear. Fatigue cracks are initiated in regions where the material is subjected to repeated plastic deformations, e.g. the transition radius in a forward extrusion die, in the present work, a material model capable...... be controlled by means of the pre-stressing system or the geometry of the die insert. (C) 2000 Elsevier Science B.V. All rights reserved....

  9. The effect of grain size on dynamic tensile extrusion behaviour

    Directory of Open Access Journals (Sweden)

    Park Leeju

    2015-01-01

    Full Text Available Dynamic tensile extrusion (DTE tests were conducted on coarse grained and ultrafine grained (UFG OFHC Cu, Interstitial free (IF Steel, and pure Ta. Equal channel angular pressing (ECAP of 16passes with Bc for Cu, IF Steel and 4 passes for Ta was employed to fabricated UFG materials. DTE tests were carried out by launching the sphere samples (Dia. 7.62 mm to the conical extrusion die at a speed of ∼500 m/sec. The fragmentation behavior of the soft-recovered fragments were examined and compared with each other. The DTE fragmentation behavior of CG and UFG was numerically simulated by the LS-DYNA FEM code.

  10. Chemical, physical and nutritional changes in soybean meal as a result of toasting and extrusion cooking

    NARCIS (Netherlands)

    Marsman, G.J.P.

    1998-01-01

    The effect of soybean meal extrusion and the development of shear forces during single-screw extrusion was compared with the toasting process of soybean meal. Attention was focused on chemical, physical and nutritional changes during these thermo-mechanical

  11. Undergraduate Seminars: The Poster Session Solution.

    Science.gov (United States)

    Chute, Douglas L.; Bank, Barry

    1983-01-01

    A good alternative to the undergraduate psychology seminar is the poster session. During the course each student wrote a review paper. For use in his/her class presentation, the student provided the following information on poster paper: title, author, abstract, a few graphs or illustrations from the literature, conclusions, and references. (RM)

  12. Fuel performance-REP, Seminars on nuclear fuel performance based on basic underlining phenomena, proceedings

    International Nuclear Information System (INIS)

    2008-01-01

    Description: The need for further improving the understanding of basic phenomena underlying nuclear fuel behaviour has been recognised both by fuel vendors, experts in fuel research in the different laboratories and committees and working groups coordinating international activities. The OECD/NEA Nuclear Science Committee has established an Experts Group addressing this issue. This has led to establishing an International Fuel Performance Experiments Database (IFPE) that should help model evaluation and validation. Many years ago the IAEA established an International Working Group on Fuel Performance and Technology (IWGFPT) that led to the FUMEX-I and FUMEX-II (Fuel Modelling Exercise) which has had an important impact on code improvements. Both international organisations, with the support of national organisations, co-operate in establishing and maintaining the Database and to build confidence in the predictive power of the models through international comparison exercises. But above all the different parties have agreed that seminars focussed on specific phenomena would be beneficial to exchange current knowledge, identify outstanding problems and agree on common action that would lead to improved understanding of the phenomena. A series of three seminars has been initiated by the Commissariat a l'Energie Atomique (CEA), Electricite de France (EdF), Framatome and Cogema under the aegis of the OECD/NEA and the IAEA. 1. Thermal Performance of High Burn-Up LWR Fuel at Cadarache, France, from 3 to 6 of March 1998. Thermal performance occupies the most important aspect of the fuel performance modelling. Not only is it extremely important from a safety point of view, but also many of the material properties of interest and behaviour, such as transport properties like fuel creep and fission gas release are thermally activated processes. Thus, in order to model these processes correctly, it is critical to calculate temperatures and their distribution as accurately as

  13. Bibliography of ceramic extrusion and plasticity

    Energy Technology Data Exchange (ETDEWEB)

    Janney, M.A.; Vance, M.C.; Jordan, A.C.; Kertesz, M.P.

    1987-03-01

    A comprehensive bibliography of ceramic extrusion and plasticity has been compiled. Over 670 abstracts are included covering the period 1932 to 1984. Citations cover a wide range of interests from basic science investigations to engineering ''tips'' and include references to brick and tile, whitewares, technical ceramics, theoretical models, engineering analyses, forming, drying, and raw materials. In addition to the citations, there are numerous indices to make the bibliography easy to use.

  14. Preventing Silicone Tube Extrusion after Nasolacrimal Duct Intubation in Children

    Directory of Open Access Journals (Sweden)

    Ali-Akbar Sabermoghaddam

    2010-01-01

    Full Text Available Herein we report our experience with a simple technique for reducing the rate of silicone tube extrusion after nasolacrimal duct (NLD intubation for congenital NLD obstruction. Medical records of children older than 2 years, with or without history of failed probing, who had undergone NLD intubation with a Crawford silicone tube over a period of 4 years were reviewed. In all subjects, one end of the Crawford tube was passed through a piece of scalp vein tubing followed by applying one or two knots. All Crawford tubes were removed after 3 months. Main outcome measures included complications such as tube extrusion, nasal discharge, crust formation and pyogenic granuloma formation. Fifty-seven patients, including 49 unilateral and 8 bilateral cases with mean age of 3.8΁1.6 (range, 2 to 11.5 years were operated. No complications such as tube dislodgement, significant nasal discharge, crust or pyogenic granuloma formation occurred prior to Crawford tube removal. All silicone tubes were successfully removed from the nasal cavity. In conclusion, passing one end of the Crawford tube through a small piece of scalp vein tubing before knotting it in the nasal cavity seems to decrease the rate of tube extrusion which is the most common complication following NLD intubation in children.

  15. Multidrug and toxin extrusion proteins as transporters of antimicrobial drugs.

    Science.gov (United States)

    Nies, Anne T; Damme, Katja; Schaeffeler, Elke; Schwab, Matthias

    2012-12-01

    Antimicrobial drugs are essential in the treatment of infectious diseases. A better understanding of transport processes involved in drug disposition will improve the predictability of drug-drug interactions with consequences for drug response. Multidrug And Toxin Extrusion (MATE; SLC47A) proteins are efflux transporters mediating the excretion of several antimicrobial drugs as well as other organic compounds into bile and urine, thereby contributing to drug disposition. This review summarizes current knowledge of the structural and molecular features of human MATE transporters including their functional role in drug transport with a specific focus on antimicrobial drugs. The PubMed database was searched using the terms "MATE1," "MATE-2K," "MATE2," "SLC47A1," "SLC47A2," and "toxin extrusion protein" (up to June 2012). MATE proteins have been recognized as important transporters mediating the final excretion step of cationic drugs into bile and urine. These include the antiviral drugs acyclovir, amprenavir, and ganciclovir, the antibiotics cephalexin, cephradine and levofloxacin, as well as the antimalarial agents chloroquine and quinine. It is therefore important to enhance our understanding of the role of MATEs in drug extrusion with particular emphasis on the functional consequences of genetic variants on disposition of these antimicrobial drugs.

  16. Structure-Property Correlations in Al-Li Alloy Integrally Stiffened Extrusions

    Science.gov (United States)

    Hales, Stephen J.; Hafley, Robert A.

    2001-01-01

    The objective of this investigation was to establish the relationship between mechanical property anisotropy, microstructure and crystallographic texture in integrally 'T'-stiffened extruded panels fabricated from the Al-Li alloys 2195, 2098 and 2096. In-plane properties were measured as a function of orientation at two locations in the panels, namely mid-way between (Skin), and directly beneath (Base), the integral 'T' stiffeners. The 2195 extrusion exhibited the best combination of strength and toughness, but was the most anisotropic. The 2098 extrusion exhibited lower strength and comparable toughness, but was more isotropic than 2195. The 2096 extrusion exhibited the lowest strength and poor toughness, but was the most isotropic. All three alloys exhibited highly elongated grain structures and similar location-dependent variations in grain morphology. The textural characteristics comprised a beta + fiber texture, similar to rolled product, in the Skin regions and alpha + fiber texture, comparable to axisymmetric extruded product, in the Base regions. In an attempt to quantitatively correlate texture with yield strength anisotropy, the original 'full constraint' Taylor model and a variant of the 'relaxed constraint' model, explored by Wert et al., were applied to the data. A comparison of the results revealed that the Wert model was consistently more accurate than the Taylor model.

  17. Textures and mechanical properties in rare-earth free quasicrystal reinforced Mg-Zn-Zr alloys prepared by extrusion

    International Nuclear Information System (INIS)

    Ohhashi, S.; Kato, A.; Demura, M.; Tsai, A.P.

    2011-01-01

    Highlights: → Powder-metallurgical warm extrusion made quasicrystal dispersing Mg alloys. → Mg extrusions containing quasicrystals showed randomized textures. → These extrusion showed the enhancement of mechanical properties at 150 deg. C. - Abstract: Microstructure and mechanical properties of quasicrystals dispersed Mg alloys prepared by warm extrusion of the mixtures of Mg and Zn-Mg-Zr quasicrystalline (Qc) powders have been studied. Strong texture oriented along a [101-bar 0] direction observed in pure Mg was reduced in Qc-dispersed samples, as verified by pole figure method and electron back scattering diffraction. The ultimate tensile strengths at 150 deg. C for Qc-dispersed extrusions were much higher than 110 MPa for pure Mg, which drastically reached 156 MPa for 15 wt.% Qc by preventing the motion of dislocations. Elongation was improved by the randomization of grain orientation: from 5.7% for pure Mg to 12.9% for 10 wt.% Qc at room temperature; from 15% for pure Mg to 37.1% for 5 wt.% Qc at 150 deg. C.

  18. FY 2000 research cooperation project on plastic processing technology/quality inspection technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of improving the production technology of plastic products in Saudi Arabia, the joint development was made of the formation technology/quality inspection technology of agricultural use and food packaging use polyolefin film optimum to environmental conditions of the site, in the light of the needs there, and the FY 2000 results were reported. In the field survey/joint study, for the xenon type weather resistant testing machine and the extruder of the inflation film forming machine which were transported from Japan, the following were carried out: confirmation of the situation of accepting them on the site, functional test of computer of the extruder, installation of the machine testing weather resistance, and the trial operation. In the domestic support study, the extrusion test at laboratory was conducted using the polyethylene resin produced on the site to acquire the basic data for formation stability. Further, the film formation test was made using the equipment with the same specifications as those of the equipment introduced to the site to study the performance of screw extrusion and the formation stability of film. Also conducted were the analytical test/quality evaluation of resin materials/film. (NEDO)

  19. Proceedings of the fifth seminar on software development in nuclear energy research

    International Nuclear Information System (INIS)

    Hasegawa, Akira; Maekawa, Hiroshi; Fujiki, Kazuo; Harada, Hiroo

    1989-02-01

    These proceedings are the compilations of papers presented to the Fifth Seminar on Software Development in Nuclear Energy Research held at Tokai Research Establishment, Japan Atomic Energy Research Institute (JAERI), October 17 - 18, 1988. The seminar was organized in cooperation with Japanese Committee on Reactor Physics (JCRP) and Japanese Nuclear Code Committee (JNCC). The topics of seminar include the invited papers on the subjects: - Net work for Atomic Energy Research - (1) Present and future of Networks, (2) Applications of Networks, (3) Panel Discussion : Usage of Networks in Atomic Energy Research, - Frontier of Simulation Softwares for the Environment Safety - (4) Numerical Simulation of Grobal Scale Dispersion on the Chernobyl Accident, and (5) Oceanic Diffusion and Safety Evaluation of High Level Waste Disposal in Geological Media. (author)

  20. Content analysis of medical students' seminars: a unique method of analyzing clinical thinking.

    Science.gov (United States)

    Takata, Yukari; Stein, Gerald H; Endo, Kuniyuki; Arai, Akiko; Kohsaka, Shun; Kitano, Yuka; Honda, Hitoshi; Kitazono, Hidetaka; Tokunaga, Hironobu; Tokuda, Yasuharu; Obika, Mikako; Miyoshi, Tomoko; Kataoka, Hitomi; Terasawa, Hidekazu

    2013-12-01

    The study of communication skills of Asian medical students during structured Problem-based Learning (PBL) seminars represented a unique opportunity to assess their critical thinking development. This study reports the first application of the health education technology, content analysis (CA), to a Japanese web-based seminar (webinar). The authors assigned twelve randomly selected medical students from two universities and two clinical instructors to two virtual classrooms for four PBL structured tutoring sessions that were audio-video captured for CA. Both of the instructors were US-trained physicians. This analysis consisted of coding the students' verbal comments into seven types, ranging from trivial to advanced knowledge integration comments that served as a proxy for clinical thinking. The most basic level of verbal simple responses accounted for a majority (85%) of the total students' verbal comments. Only 15% of the students' comments represented more advanced types of critical thinking. The male students responded more than the female students; male students attending University 2 responded more than male students from University 1. The total mean students' verbal response time for the four sessions with the male instructor was 6.9%; total mean students' verbal response time for the four sessions with the female instructor was 19% (p thinking for medical students. This report may stimulate improvements for implementation.