Extremum-Seeking Control and Applications A Numerical Optimization-Based Approach
Zhang, Chunlei
2012-01-01
Extremum seeking control tracks a varying maximum or minimum in a performance function such as a cost. It attempts to determine the optimal performance of a control system as it operates, thereby reducing downtime and the need for system analysis. Extremum Seeking Control and Applications is divided into two parts. In the first, the authors review existing analog optimization based extremum seeking control including gradient, perturbation and sliding mode based control designs. They then propose a novel numerical optimization based extremum seeking control based on optimization algorithms and state regulation. This control design is developed for simple linear time-invariant systems and then extended for a class of feedback linearizable nonlinear systems. The two main optimization algorithms – line search and trust region methods – are analyzed for robustness. Finite-time and asymptotic state regulators are put forward for linear and nonlinear systems respectively. Further design flexibility is achieved u...
Real-time sail and heading optimization for a surface sailing vessel by extremum seeking control
DEFF Research Database (Denmark)
Treichel, Kai; Jouffroy, Jerome
2010-01-01
In this paper we develop a simplified mathematical model representing the main elements of the behaviour of sailing vessels as a basis for simulation and controller design. For adaptive real-time optimization of the sail and heading angle we then apply extremum seeking control (which is a gradient...
Karam, Ayman M.
2015-09-21
This paper presents a real time optimization scheme for a solar powered direct contact membrane distillation (DCMD) water desalination system. The sun and weather conditions vary and are inconsistent throughout the day. Therefore, the solar powered DCMD feed inlet temperature is never constant, which influences the distilled water flux. The problem of DCMD process optimization has not been studied enough. In this work, the response of the process under various feed inlet temperatures is investigated, which demonstrates the need for an optimal controller. To address this issue, we propose a multivariable Newton-based extremum seeking controller which optimizes the inlet feed and permeate mass flow rates as the feed inlet temperature varies. Results are presented and discussed for a realistic temperature profile.
Real-Time Optimization of Organic Rankine Cycle Systems by Extremum-Seeking Control
Directory of Open Access Journals (Sweden)
Andres Hernandez
2016-05-01
Full Text Available In this paper, the optimal operation of a stationary sub-critical 11 kW el organic Rankine cycle (ORC unit for waste heat recovery (WHR applications is investigated, both in terms of energy production and safety conditions. Simulation results of a validated dynamic model of the ORC power unit are used to derive a correlation for the evaporating temperature, which maximizes the power generation for a range of operating conditions. This idea is further extended using a perturbation-based extremum seeking (ES algorithm to identify online the optimal evaporating temperature. Regarding safety conditions, we propose the use of the extended prediction self-adaptive control (EPSAC approach to constrained model predictive control (MPC. Since it uses input/output models for prediction, it avoids the need for state estimators, making it a suitable tool for industrial applications. The performance of the proposed control strategy is compared to PID-like schemes. Results show that EPSAC-MPC is a more effective control strategy, as it allows a safer and more efficient operation of the ORC unit, as it can handle constraints in a natural way, operating close to the boundary conditions where power generation is maximized.
2016-09-07
use of a class of receding- horizon type of algorithms to overcome the effect of a type of uncoordinated attackers on a multi-vehicle-operator group...science, which accounts for both the aspects of resilience under adversaries, and learning via extremum seeking, and distributed optimization techniques...receding- horizon control and distributed parameter learning for the robust coordination of multi-agent systems. A study of the tradeoffs in costs
Directory of Open Access Journals (Sweden)
Jui-Ho Chen
2014-03-01
Full Text Available This paper proposes a sliding mode extremum seeking control (SMESC of chaos embedded particle swarm optimization (CEPSO Algorithm, applied to the design of maximum power point tracking in wind power systems. Its features are that the control parameters in SMESC are optimized by CEPSO, making it unnecessary to change the output power of different wind turbines, the designed in-repetition rate is reduced, and the system control efficiency is increased. The wind power system control is designed by simulation, in comparison with the traditional wind power control method, and the simulated dynamic response obtained by the SMESC algorithm proposed in this paper is better than the traditional hill-climbing search (HCS and extremum seeking control (ESC algorithms in the transient or steady states, validating the advantages and practicability of the method proposed in this paper.
Stochastic Averaging and Stochastic Extremum Seeking
Liu, Shu-Jun
2012-01-01
Stochastic Averaging and Stochastic Extremum Seeking develops methods of mathematical analysis inspired by the interest in reverse engineering and analysis of bacterial convergence by chemotaxis and to apply similar stochastic optimization techniques in other environments. The first half of the text presents significant advances in stochastic averaging theory, necessitated by the fact that existing theorems are restricted to systems with linear growth, globally exponentially stable average models, vanishing stochastic perturbations, and prevent analysis over infinite time horizon. The second half of the text introduces stochastic extremum seeking algorithms for model-free optimization of systems in real time using stochastic perturbations for estimation of their gradients. Both gradient- and Newton-based algorithms are presented, offering the user the choice between the simplicity of implementation (gradient) and the ability to achieve a known, arbitrary convergence rate (Newton). The design of algorithms...
Extremum Seeking Tuning for Reel Tension Control in Haptic Application
Otis, Martin J.-D.; Nguyen-Dang, Thien-Ly; Laurendeau, Denis; Gosselin, Clément
2009-03-01
Optimal tension control in parallel mechanisms for balancing wrench at the end-effector introduces a complex model of the overall system. Moreover, actuator saturations such as motor current and angular velocity limits impose that a non-linear system be controlled. Such a system is usually controlled sub-optimally due to the complexity of its model. In haptic applications where transparency and stability are both critical parameters, optimal performance should be achieved. This paper introduces an enhanced FPID auto-tuning based on Extremum Seeking-Tuning (ES-Tuning) which uses a different cost function to find the local optimal solution for haptic rendering and a correction on noise measurement for a high order complex system. The solution of this optimization gives a direct measure of the reel dynamic transparency evaluated by the proposed cost function.
Model-free stabilization by extremum seeking
Scheinker, Alexander
2017-01-01
With this brief, the authors present algorithms for model-free stabilization of unstable dynamic systems. An extremum-seeking algorithm assigns the role of a cost function to the dynamic system’s control Lyapunov function (clf) aiming at its minimization. The minimization of the clf drives the clf to zero and achieves asymptotic stabilization. This approach does not rely on, or require knowledge of, the system model. Instead, it employs periodic perturbation signals, along with the clf. The same effect is achieved as by using clf-based feedback laws that profit from modeling knowledge, but in a time-average sense. Rather than use integrals of the systems vector field, we employ Lie-bracket-based (i.e., derivative-based) averaging. The brief contains numerous examples and applications, including examples with unknown control directions and experiments with charged particle accelerators. It is intended for theoretical control engineers and mathematicians, and practitioners working in various industrial areas ...
Extremum Seeking Control of Smart Inverters for VAR Compensation
Energy Technology Data Exchange (ETDEWEB)
Arnold, Daniel; Negrete-Pincetic, Matias; Stewart, Emma; Auslander, David, M; Callaway, Duncan
2015-09-04
Reactive power compensation is used by utilities to ensure customer voltages are within pre-defined tolerances and reduce system resistive losses. While much attention has been paid to model-based control algorithms for reactive power support and Volt Var Optimization (VVO), these strategies typically require relatively large communications capabilities and accurate models. In this work, a non-model-based control strategy for smart inverters is considered for VAR compensation. An Extremum Seeking control algorithm is applied to modulate the reactive power output of inverters based on real power information from the feeder substation, without an explicit feeder model. Simulation results using utility demand information confirm the ability of the control algorithm to inject VARs to minimize feeder head real power consumption. In addition, we show that the algorithm is capable of improving feeder voltage profiles and reducing reactive power supplied by the distribution substation.
Combustion distribution control using the extremum seeking algorithm
International Nuclear Information System (INIS)
Marjanovic, A; Djurovic, Z; Kvascev, G; Papic, V; Krstic, M
2014-01-01
Quality regulation of the combustion process inside the furnace is the basis of high demands for increasing robustness, safety and efficiency of thermal power plants. The paper considers the possibility of spatial temperature distribution control inside the boiler, based on the correction of distribution of coal over the mills. Such control system ensures the maintenance of the flame focus away from the walls of the boiler, and thus preserves the equipment and reduces the possibility of ash slugging. At the same time, uniform heat dissipation over mills enhances the energy efficiency of the boiler, while reducing the pollution of the system. A constrained multivariable extremum seeking algorithm is proposed as a tool for combustion process optimization with the main objective of centralizing the flame in the furnace. Simulations are conducted on a model corresponding to the 350MW boiler of the Nikola Tesla Power Plant, in Obrenovac, Serbia
Combustion distribution control using the extremum seeking algorithm
Marjanovic, A.; Krstic, M.; Djurovic, Z.; Kvascev, G.; Papic, V.
2014-12-01
Quality regulation of the combustion process inside the furnace is the basis of high demands for increasing robustness, safety and efficiency of thermal power plants. The paper considers the possibility of spatial temperature distribution control inside the boiler, based on the correction of distribution of coal over the mills. Such control system ensures the maintenance of the flame focus away from the walls of the boiler, and thus preserves the equipment and reduces the possibility of ash slugging. At the same time, uniform heat dissipation over mills enhances the energy efficiency of the boiler, while reducing the pollution of the system. A constrained multivariable extremum seeking algorithm is proposed as a tool for combustion process optimization with the main objective of centralizing the flame in the furnace. Simulations are conducted on a model corresponding to the 350MW boiler of the Nikola Tesla Power Plant, in Obrenovac, Serbia.
Emergent Behavior of Multi-Vehicle Formations Using Extremum Seeking
Brodecki, M.; Subbarao, K.; Chu, Q.P.
2013-01-01
Emergent behavior of a formation flight control system based on an advanced extremum seeking algorithm is investigated. The control system was implemented on a nonlinear high fidelity aircraft model and combined with a wake vortex model in order to accurately represent the aerodynamic coupling
A new extremum seeking technique and its application to maximize RF heating on FTU
International Nuclear Information System (INIS)
Carnevale, D.; Astolfi, A.; Centioli, C.; Podda, S.; Vitale, V.; Zaccarian, L.
2009-01-01
We propose a new global extremum seeking algorithm to optimize the coupling between the emitting Lower Hybrid (LH) antennas and the plasma scrape off layer in the radiofrequency (RF) heating problem in tokamak plasmas. The new algorithm, where the existing disturbances affecting the system are seen as the probing signals, requires less constraining properties than the previous ones and is more robust. In particular, simulation results are presented illustrating the effectiveness of the algorithm on the Lower Hybrid RF heating of the Frascati Tokamak Upgrade (FTU).
Extremum seeking x-ray position feedback using power line harmonic leakage as the perturbation
Zohar, S.; Kissick, D. J.; Venugopalan, N.; Ogata, C. M.; Makarov, O.; Stepanov, S.; Fischetti, R. F.
2016-09-01
Small x-ray beam sizes necessary for probing nanoscale phenomena require exquisite stability to prevent data corruption by noise. One source of instability at synchrotron radiation x-ray beamlines is the slow detuning of x-ray optics to marginal alignment where the onset of clipping increases the beam's susceptibility to higher frequency position oscillations. In this article, we show that a 1 μ m amplitude horizontal x-ray beam oscillation driven by power line harmonic leakage into the electron storage ring can be used as perturbation for horizontal position extremum seeking feedback. Feedback performance is characterized by convergence to 1.5% away from maximum intensity at optimal alignment.
Extremum seeking x-ray position feedback using power line harmonic leakage as the perturbation
Energy Technology Data Exchange (ETDEWEB)
Zohar, S.; Kissick, D. J.; Venugopalan, N.; Ogata, C. M.; Makarov, O.; Stepanov, S.; Fischetti, R. F.
2016-09-01
Small X-ray beam sizes necessary for probing nanoscale phenomena require exquisite stability to prevent data corruption by noise. One source of instability at synchrotron radiation X-ray beamlines is the slow detuning of X-ray optics to marginal alignment where the onset of clipping increases the beam’s susceptibility to higher frequency position oscillations. In this article, we show that a 1 µm amplitude horizontal X-ray beam oscillation driven by power line harmonic leakage into the electron storage ring can be used as perturbation for horizontal position extremum seeking feedback. Feedback performance is characterized by convergence to 1.5% away from maximum intensity at optimal alignment.
Extremum seeking x-ray position feedback using power line harmonic leakage as the perturbation
Energy Technology Data Exchange (ETDEWEB)
Zohar, S.; Kissick, D. J.; Venugopalan, N.; Ogata, C. M.; Makarov, O.; Stepanov, S.; Fischetti, R. F.
2016-09-01
Small x-ray beam sizes necessary for probing nanoscale phenomena require exquisite stability to prevent data corruption by noise. One source of instability at synchrotron radiation x-ray beamlines is the slow detuning of x-ray optics to marginal alignment where the onset of clipping increases the beam's susceptibility to higher frequency position oscillations. In this article, we show that a 1 mu m amplitude horizontal x-ray beam oscillation driven by power line harmonic leakage into the electron storage ring can be used as perturbation for horizontal position extremum seeking feedback. Feedback performance is characterized by convergence to 1.5% away from maximum intensity at optimal alignment.
Extremum seeking x-ray position feedback using power line harmonic leakage as the perturbation
Directory of Open Access Journals (Sweden)
S. Zohar
2016-09-01
Full Text Available Small x-ray beam sizes necessary for probing nanoscale phenomena require exquisite stability to prevent data corruption by noise. One source of instability at synchrotron radiation x-ray beamlines is the slow detuning of x-ray optics to marginal alignment where the onset of clipping increases the beam’s susceptibility to higher frequency position oscillations. In this article, we show that a 1 μm amplitude horizontal x-ray beam oscillation driven by power line harmonic leakage into the electron storage ring can be used as perturbation for horizontal position extremum seeking feedback. Feedback performance is characterized by convergence to 1.5% away from maximum intensity at optimal alignment.
MPPT for Photovoltaic Modules via Newton-Like Extremum Seeking Control
Directory of Open Access Journals (Sweden)
Ramon Leyva
2012-07-01
Full Text Available The paper adapts the Newton-like Extremum-Seeking Control technique to extract the maximum power from photovoltaic panels. This technique uses the gradient and Hessian of the panel characteristic in order to approximate the operating point to its optimum. The paper describes in detail the gradient and Hessian estimations carried out by means of sinusoidal dithering signals. Furthermore, we compare the proposed technique with the common Extremum Seeking Control that only uses the gradient. The comparison is done by means of PSIM simulations and it shows the different transient behaviors and the faster response of the Newton-like Extremum-Seeking Control solution.
PADF electromagnetic source localization using extremum seeking control
Al Issa, Huthaifa A.; Ordóñez, Raúl
2014-10-01
Wireless Sensor Networks (WSNs) are a significant technology attracting considerable research interest. Recent advances in wireless communications and electronics have enabled the development of low-cost, low-power and multi-functional sensors that are small in size and communicate over short distances. Most WSN applications require knowing or measuring locations of thousands of sensors accurately. For example, sensing data without knowing the sensor location is often meaningless. Locations of sensor nodes are fundamental to providing location stamps, locating and tracking objects, forming clusters, and facilitating routing. This research focused on the modeling and implementation of distributed, mobile radar sensor networks. In particular, we worked on the problem of Position-Adaptive Direction Finding (PADF), to determine the location of a non- collaborative transmitter, possibly hidden within a structure, by using a team of cooperative intelligent sensor networks. Position-Adaptive radar concepts have been formulated and investigated at the Air Force Research Laboratory (AFRL) within the past few years. In this paper, we present the simulation performance analysis on the application aspect. We apply Extremum Seeking Control (ESC) schemes by using the swarm seeking problem, where the goal is to design a control law for each individual sensor that can minimize the error metric by adapting the sensor positions in real-time, thereby minimizing the unknown estimation error. As a result we achieved source seeking and collision avoidance of the entire group of the sensor positions.
Directory of Open Access Journals (Sweden)
Chen-Han Wu
2011-12-01
Full Text Available Due to Japan’s recent nuclear crisis and petroleum price hikes, the search for renewable energy sources has become an issue of immediate concern. A promising candidate attracting much global attention is solar energy, as it is green and also inexhaustible. A maximum power point tracking (MPPT controller is employed in such a way that the output power provided by a photovoltaic (PV system is boosted to its maximum level. However, in the context of abrupt changes in irradiance, conventional MPPT controller approaches suffer from insufficient robustness against ambient variation, inferior transient response and a loss of output power as a consequence of the long duration required of tracking procedures. Accordingly, in this work the maximum power point tracking is carried out successfully using a sliding mode extremum-seeking control (SMESC method, and the tracking performances of three controllers are compared by simulations, that is, an extremum-seeking controller, a sinusoidal extremum-seeking controller and a sliding mode extremum-seeking controller. Being able to track the maximum power point promptly in the case of an abrupt change in irradiance, the SMESC approach is proven by simulations to be superior in terms of system dynamic and steady state responses, and an excellent robustness along with system stability is demonstrated as well.
A Newton-Based Extremum Seeking MPPT Method for Photovoltaic Systems with Stochastic Perturbations
Li, Heng; Peng, Jun; Liu, Weirong; Huang, Zhiwu; Lin, Kuo-Chi
2014-01-01
Microcontroller based maximum power point tracking (MPPT) has been the most popular MPPT approach in photovoltaic systems due to its high flexibility and efficiency in different photovoltaic systems. It is well known that PV systems typically operate under a range of uncertain environmental parameters and disturbances, which implies that MPPT controllers generally suffer from some unknown stochastic perturbations. To address this issue, a novel Newton-based stochastic extremum seeking MPPT me...
A Newton-Based Extremum Seeking MPPT Method for Photovoltaic Systems with Stochastic Perturbations
Directory of Open Access Journals (Sweden)
Heng Li
2014-01-01
Full Text Available Microcontroller based maximum power point tracking (MPPT has been the most popular MPPT approach in photovoltaic systems due to its high flexibility and efficiency in different photovoltaic systems. It is well known that PV systems typically operate under a range of uncertain environmental parameters and disturbances, which implies that MPPT controllers generally suffer from some unknown stochastic perturbations. To address this issue, a novel Newton-based stochastic extremum seeking MPPT method is proposed. Treating stochastic perturbations as excitation signals, the proposed MPPT controller has a good tolerance of stochastic perturbations in nature. Different from conventional gradient-based extremum seeking MPPT algorithm, the convergence rate of the proposed controller can be totally user-assignable rather than determined by unknown power map. The stability and convergence of the proposed controller are rigorously proved. We further discuss the effects of partial shading and PV module ageing on the proposed controller. Numerical simulations and experiments are conducted to show the effectiveness of the proposed MPPT algorithm.
Eleiwi, Fadi
2017-05-08
An Observer-based Perturbation Extremum Seeking Control (PESC) is proposed for a Direct-Contact Membrane Distillation (DCMD) process. The process is described with a dynamic model that is based on a 2D Advection-Diffusion Equation (ADE) model which has pump flow rates as process inputs. The objective of the controller is to optimize the trade-off between the permeate mass flux and the energy consumption by the pumps inside the process. Cases of single and multiple control inputs are considered through the use of only the feed pump flow rate or both the feed and the permeate pump flow rates. A nonlinear Lyapunov-based observer is designed to provide an estimation for the temperature distribution all over the designated domain of the DCMD process. Moreover, control inputs are constrained with an anti-windup technique to be within feasible and physical ranges. Performance of the proposed structure is analyzed, and simulations based on real DCMD process parameters for each control input are provided.
New numerical methods for open-loop and feedback solutions to dynamic optimization problems
Ghosh, Pradipto
The topic of the first part of this research is trajectory optimization of dynamical systems via computational swarm intelligence. Particle swarm optimization is a nature-inspired heuristic search method that relies on a group of potential solutions to explore the fitness landscape. Conceptually, each particle in the swarm uses its own memory as well as the knowledge accumulated by the entire swarm to iteratively converge on an optimal or near-optimal solution. It is relatively straightforward to implement and unlike gradient-based solvers, does not require an initial guess or continuity in the problem definition. Although particle swarm optimization has been successfully employed in solving static optimization problems, its application in dynamic optimization, as posed in optimal control theory, is still relatively new. In the first half of this thesis particle swarm optimization is used to generate near-optimal solutions to several nontrivial trajectory optimization problems including thrust programming for minimum fuel, multi-burn spacecraft orbit transfer, and computing minimum-time rest-to-rest trajectories for a robotic manipulator. A distinct feature of the particle swarm optimization implementation in this work is the runtime selection of the optimal solution structure. Optimal trajectories are generated by solving instances of constrained nonlinear mixed-integer programming problems with the swarming technique. For each solved optimal programming problem, the particle swarm optimization result is compared with a nearly exact solution found via a direct method using nonlinear programming. Numerical experiments indicate that swarm search can locate solutions to very great accuracy. The second half of this research develops a new extremal-field approach for synthesizing nearly optimal feedback controllers for optimal control and two-player pursuit-evasion games described by general nonlinear differential equations. A notable revelation from this development
Offset Risk Minimization for Open-loop Optimal Control of Oil Reservoirs
DEFF Research Database (Denmark)
Capolei, Andrea; Christiansen, Lasse Hjuler; Jørgensen, J. B.
2017-01-01
the associated financial risks, the oil literature has used ensemble-based methods to manipulate the net present value (NPV) distribution by optimizing sample estimated risk measures. In general, such methods successfully reduce overall risk. However, as this paper demonstrates, ensemble-based control strategies......Simulation studies of oil field water flooding have demonstrated a significant potential of optimal control technology to improve industrial practices. However, real-life applications are challenged by unknown geological factors that make reservoir models highly uncertain. To minimize...... may result in individual profit outcomes that perform worse than real-life dominating strategies. This poses significant financial risks to oil companies whose main concern is to avoid unacceptable low profits. To remedy this, this paper proposes offset risk mimimization. Unlike existing methodology...
Directory of Open Access Journals (Sweden)
Ssennoga Twaha
2017-12-01
Full Text Available This study proposes and implements maximum power Point Tracking (MPPT control on thermoelectric generation system using an extremum seeking control (ESC algorithm. The MPPT is applied to guarantee maximum power extraction from the TEG system. The work has been carried out through modelling of thermoelectric generator/dc-dc converter system using Matlab/Simulink. The effectiveness of ESC technique has been assessed by comparing the results with those of the Perturb and Observe (P&O MPPT method under the same operating conditions. Results indicate that ESC MPPT method extracts more power than the P&O technique, where the output power of ESC technique is higher than that of P&O by 0.47 W or 6.1% at a hot side temperature of 200 °C. It is also noted that the ESC MPPT based model is almost fourfold faster than the P&O method. This is attributed to smaller MPPT circuit of ESC compared to that of P&O, hence we conclude that the ESC MPPT method outperforms the P&O technique.
Extremum-seeking control for an Ultrasonic/Sonic Driller/Corer (USDC) driven at high-power
Aldrich, Jack; Sherrit, Stewart; Bao, Xiaoqi; Bar-Cohen, Yoseph; Badescu, Mircea; Chang, Zensheu
2006-01-01
Future NASA exploration missions will increasingly require sampling, in-situ analysis and possibly the return of material to Earth for further tests. One of the challenges to addressing this need is the ability to drill using for low axial loading while operating from light weight platforms (e.g., lander, rover, etc.) as well as operate at planets with low gravity. For this purpose, the authors developed the Ultrasonic/Sonic Driller/Corer (USDC) jointly with Cybersonics Inc. Studies of the operation of the USDC at high power have shown there is a critical need to self-tune to maintain the operation of the piezoelectric actuator at resonance. Performing such tuning is encountered with difficulties and to address them an extremum-seeking control algorithm is being investigated. This algorithm is designed to tune the driving frequency of a time-varying resonating actuator subjected to both random and high-power impulsive noise disturbances. Using this algorithm the performance of the actuator is monitored on a time-scale that is compatible with its slowly time-varying physical characteristics. The algorithm includes a parameter estimator, which estimates the coefficients of a function that characterizes the quality factor of the USDC. Since the parameter estimator converges sufficiently faster than the time-varying drift of the USDC's physical parameters, the proposed extremum-seeking estimation and control algorithm is potentially applicable for use as a closed-loop health monitoring system. Specifically, this system may be programmed to automatically adjust the duty-cycle of the sinusoidal driver signal to guarantee that the quality factor of the USDC does not fall below a user-defined set-point. Such fault-tolerant functionality is especially important in automated drilling applications where it is essential not to inadvertently drive the piezoelectric ceramic crystals of the USDC beyond their capacities. The details of the algorithm and experimental results will
Tchamna, Rodrigue; Lee, Moonyong
2018-01-01
This paper proposes a novel optimization-based approach for the design of an industrial two-term proportional-integral (PI) controller for the optimal regulatory control of unstable processes subjected to three common operational constraints related to the process variable, manipulated variable and its rate of change. To derive analytical design relations, the constrained optimal control problem in the time domain was transformed into an unconstrained optimization problem in a new parameter space via an effective parameterization. The resulting optimal PI controller has been verified to yield optimal performance and stability of an open-loop unstable first-order process under operational constraints. The proposed analytical design method explicitly takes into account the operational constraints in the controller design stage and also provides useful insights into the optimal controller design. Practical procedures for designing optimal PI parameters and a feasible constraint set exclusive of complex optimization steps are also proposed. The proposed controller was compared with several other PI controllers to illustrate its performance. The robustness of the proposed controller against plant-model mismatch has also been investigated. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.
Musthofa, M.W.; Salmah, S.; Engwerda, Jacob; Suparwanto, A.
This paper studies the robust optimal control problem for descriptor systems. We applied differential game theory to solve the disturbance attenuation problem. The robust control problem was converted into a reduced ordinary zero-sum game. Within a linear quadratic setting, we solved the problem for
A True Open-Loop Synchronization Technique
DEFF Research Database (Denmark)
Golestan, Saeed; Vidal, Ana; Yepes, Alejandro G.
2016-01-01
in a parallel manner. In the presence of the frequency feedback loop, nevertheless, the OLS technique may not be truly open-loop, which makes a deep study of stability necessary. Using the secondary frequency detector, on the other hand, increases the computational effort and implementation complexity. Another......Synchronization techniques can be broadly classified into two major categories: Closed-loop and open-loop methods. The open-loop synchronization (OLS) techniques, contrary to the closed-loop ones, are unconditionally stable and benefit from a fast dynamic response. Their performance, however, tends...... to worsen in the presence of frequency drifts. To deal with this problem, two approaches are often recommended in the literature: Adapting OLS techniques to grid frequency variations by feeding back the frequency estimated by them or using the frequency estimated by a secondary frequency detector...
TeGrotenhuis, Ward Evan
2013-11-05
A drying apparatus is disclosed that includes a drum and an open-loop airflow pathway originating at an ambient air inlet, passing through the drum, and terminating at an exhaust outlet. A passive heat exchanger is included for passively transferring heat from air flowing from the drum toward the exhaust outlet to air flowing from the ambient air inlet toward the drum. A heat pump is also included for actively transferring heat from air flowing from the passive heat exchanger toward the exhaust outlet to air flowing from the passive heat exchanger toward the drum. A heating element is also included for further heating air flowing from the heat pump toward the drum.
The Open-Loop Linear Quadratic Differential Game Revisited
Engwerda, J.C.
2005-01-01
In this note we reconsider the indefinite open-loop Nash linear quadratic differential game with an infinite planning horizon.In particular we derive both necessary and sufficient conditions under which the game will have a unique equilibrium.
Ruan, Hang; Li, Jian; Zhang, Lei; Long, Teng
2015-08-28
For vehicle positioning with Global Navigation Satellite System (GNSS) in urban areas, open-loop tracking shows better performance because of its high sensitivity and superior robustness against multipath. However, no previous study has focused on the effects of the code search grid size on the code phase measurement accuracy of open-loop tracking. Traditional open-loop tracking methods are performed by the batch correlators with fixed correlation space. The code search grid size, which is the correlation space, is a constant empirical value and the code phase measuring accuracy will be largely degraded due to the improper grid size, especially when the signal carrier-to-noise density ratio (C/N₀) varies. In this study, the Adaptive Correlation Space Adjusted Open-Loop Tracking Approach (ACSA-OLTA) is proposed to improve the code phase measurement dependent pseudo range accuracy. In ACSA-OLTA, the correlation space is adjusted according to the signal C/N₀. The novel Equivalent Weighted Pseudo Range Error (EWPRE) is raised to obtain the optimal code search grid sizes for different C/N₀. The code phase measuring errors of different measurement calculation methods are analyzed for the first time. The measurement calculation strategy of ACSA-OLTA is derived from the analysis to further improve the accuracy but reduce the correlator consumption. Performance simulation and real tests confirm that the pseudo range and positioning accuracy of ASCA-OLTA are better than the traditional open-loop tracking methods in the usual scenarios of urban area.
Development of a closed and open loop solar tracker technology
Directory of Open Access Journals (Sweden)
Aurélio Gouvêa Melo
2017-05-01
Full Text Available Solar energy is among the renewable energy sources that received greater addition in installed capacity. However, it accounts for a small fraction of the energy matrix of most countries. Electric energy generation by solar systems can be improved through tracking. This work aimed to develop and compare a closed and an open loop solar tracking system. The closed loop system was developed using Light Dependent Resistors. An algorithm was developed for the open loop tracker as a function of the geometric relation between the sun and the photovoltaic module. A simulation was run to compare this algorithm with a system using tracking at fixed time intervals, for clear sky conditions, with different tracking parameters and for five different latitudes. No significant difference was observed between the proposed open loop tracking algorithm and the fixed time interval algorithm for the tracking parameters evaluated. The open and closed loop solar tracking systems were compared experimentally in Rio das Ostras, Brazil (22.49 °S 41.92° W. An average gain of 28.5% was observed for the open loop tracking system over a latitude tilted system and 33.0% for the closed loop tracking system.
Yousaf, Saqib; Qin, Shiyin
2015-12-01
Blind image deconvolution (BID) aims to remove or reduce the degradations that have occurred during the acquisition or processing. It is a challenging ill-posed problem due to a lack of enough information in degraded image for unambiguous recovery of both point spread function (PSF) and clear image. Although recently many powerful algorithms appeared; however, it is still an active research area due to the diversity of degraded images as well as degradations. Closed-loop control systems are characterized with their powerful ability to stabilize the behavior response and overcome external disturbances by designing an effective feedback optimization. In this paper, we employed feedback control to enhance the stability of BID by driving the current estimation quality of PSF to the desired level without manually selecting restoration parameters and using an effective combination of machine learning with feedback optimization. The foremost challenge when designing a feedback structure is to construct or choose a suitable performance metric as a controlled index and a feedback information. Our proposed quality metric is based on the blur assessment of deconvolved patches to identify the best PSF and computing its relative quality. The Kalman filter-based extremum seeking approach is employed to find the optimum value of controlled variable. To find better restoration parameters, learning algorithms, such as multilayer perceptron and bagged decision trees, are used to estimate the generic PSF support size instead of trial and error methods. The problem is modeled as a combination of pattern classification and regression using multiple training features, including noise metrics, blur metrics, and low-level statistics. Multi-objective genetic algorithm is used to find key patches from multiple saliency maps which enhance performance and save extra computation by avoiding ineffectual regions of the image. The proposed scheme is shown to outperform corresponding open-loop
Boosted PWM open loop control of hydraulic proportional valves
International Nuclear Information System (INIS)
Amirante, R.; Innone, A.; Catalano, L.A.
2008-01-01
This paper presents an innovative open loop control technique for direct single stage hydraulic proportional valves whose response rate is significantly higher than that obtained by standard open loop control techniques, even comparable to more costly commercial closed loop systems. Different from standard open loop techniques, which provide the coil with a constant current proportional to the target position, the control strategy proposed in this paper employs the peak and hold (P and H) technique, widely used in Diesel engine modern supply systems, to boost the duty cycle value of the pulse width modulation (PWM) signal for a short time, namely during the spool displacement, while maintaining a lower duty cycle for holding the spool in the required opening position. The developed 'boosted PWM' technique only requires a low cost microcontroller, such as a peripheral interface controller (PIC) equipped with a metal oxide semiconductor (MOS) power driver. The PWM parameters are calibrated as a function of the spool displacement so as to maximize the response rate without introducing overshoots: the collected data are stored in the PIC. Different valve opening procedures with step response have been compared to demonstrate the merits of the proposed boosted PWM technique. No overshoots have been registered. Moreover, the proposed method is characterized by a significantly higher response rate with respect to a standard open loop control, which approximately has the same cost. Similar experimental tests show that the proposed boosted PWM technique has a response rate even higher than that provided by the more costly commercial closed loop system mounted on the valve, and it produces no overshoots
On-the-fly reduction of open loops
Buccioni, Federico; Pozzorini, Stefano; Zoller, Max
2018-01-01
Building on the open-loop algorithm we introduce a new method for the automated construction of one-loop amplitudes and their reduction to scalar integrals. The key idea is that the factorisation of one-loop integrands in a product of loop segments makes it possible to perform various operations on-the-fly while constructing the integrand. Reducing the integrand on-the-fly, after each segment multiplication, the construction of loop diagrams and their reduction are unified in a single numerical recursion. In this way we entirely avoid objects with high tensor rank, thereby reducing the complexity of the calculations in a drastic way. Thanks to the on-the-fly approach, which is applied also to helicity summation and for the merging of different diagrams, the speed of the original open-loop algorithm can be further augmented in a very significant way. Moreover, addressing spurious singularities of the employed reduction identities by means of simple expansions in rank-two Gram determinants, we achieve a remarkably high level of numerical stability. These features of the new algorithm, which will be made publicly available in a forthcoming release of the OpenLoops program, are particularly attractive for NLO multi-leg and NNLO real-virtual calculations.
International Nuclear Information System (INIS)
Antonopoulos-Domis, M.; Mourtzanos, K.
1996-01-01
Estimators of the confidence limits of open loop transfer functions via Multivariate Auto-Regressive (MAR) modelling are not available in the literature. The statistics of open loop transfer functions obtained by MAR modelling are investigated via numerical experiments. A system of known open loop transfer functions is simulated digitally and excited by random number series. The digital signals of the simulated system are then MAR modelled and the open loop transfer functions are estimated. Performing a large number of realizations, mean values and variances of the open loop transfer functions are estimated. It is found that if the record length N of each realization is long enough then the estimates of open loop transfer functions follow normal distribution. The variance of the open loop transfer functions is proportional to 1/N. For MAR processes the asymptotic covariance matrix of the estimate of open loop transfer functions was found in agreement with theoretical prediction. (author)
Heat transport modeling for the design of a low enthalpy open-loop system
Directory of Open Access Journals (Sweden)
Leonardo Piccinini
2012-12-01
Full Text Available A case study of hydrogeological characterization and heat transport modeling for the design of a low enthalpy system in the Province of Treviso (Italy is here presented. It is an open loop system that pumps and re-injects groundwater from a confined aquifer of the high Veneto plain. This type of systems is the most efficient in terms of yield, but its construction is highly conditioned by the availability of groundwater resource and by the environmental laws related to groundwater exploitation. Groundwater flow modeling with MODFLOW 2005 led to a good aquifer parameters estimation, by means of the quantitative calibration of a pumping test made on the pumping well and an observation piezometer. Then, with the heat transport modeling with SEAWAT 4 the distance between pumping well and re-injecting well has been optimized, avoiding so the thermal feedback effect. The lack of sitespecific data for dispersivity parameters has been solved through a sensitivity analysis on the main dispersivity parameters of heat transport. Finally, in order to comply with the environmental laws, a long-term forecasting simulation (duration of 20 years has been set up in order to evaluate the open loop system thermal impact on the aquifer. The obtained results put in evidence that the design of low enthalpy systems strongly needs a detailed hydrogeological characterization of the aquifer interested by the pumping and that numerical modeling is the most effective tool in support of the definition of the optimal distance between pumping and re-injecting wells in the open loop systems.
Groundwater recharge through wells in open loop geothermal system: problems and solutions - part 1
Directory of Open Access Journals (Sweden)
Giovanni Pietro Beretta
2017-07-01
Full Text Available In the two parts of this article, the problems related to the management of water wells as part of a low-enthalpy geothermal power plant by means of heat pumps (open loop system are described. In many cases, in absence of discharge in surface water and/or to ensure the conservation of the resource from a quantitative point of view, a doublet system constituted by a pumping and a recharge well is provided. The clogging phenomenon often occurs in this kind of plant, affecting wells with different functions and different thermal potential related to water withdrawal and reinjection into the ground. This phenomenon is due to the presence of air bubbles, suspended solids, bacterial growth and to the chemical-physical reactions that are described in the text. Besides acknowledging the activities for recharge wells management to avoid the fracturing of the drain and the cementation, is also suggested the procedure of in situ tests that are used to properly determine the optimal well discharge, which determines the efficiency and effectiveness of the geothermal system and its economic performance.It is finally shown a regional regulation on the water quality used in an open loop.
Importance of Hydrogeological Conditions on Open-loop Geothermal System
Park, D.; Bae, G.; Kim, S.; Lee, K.
2013-12-01
The open-loop geothermal system has been known as an eco-friendly, energy-saving, and cost-efficient alternative for the cooling and heating of buildings with directly using the relatively stable temperature of groundwater. Thus, hydrogeological properties of aquifer, such as hydraulic conductivity and storage, must be important in the system application. The study site is located near Han-river, Korea, and because of the well-developed alluvium it might be a typical site appropriate to this system requiring an amount of groundwater. In this study, the first objective of numerical experiments was to find the best distributions of pumping and injection wells suitable to the hydrogeological conditions of the site for the efficient and sustainable system operation. The aquifer has a gravel layer at 15m depth below the ground surface and the river and the agricultural field, which may be a potential contaminant source, are located at the west and east sides, respectively. Under the general conditions that the regional groundwater flows from the east to the river, the locally reversed well distribution, locating the pumping well at upgradient and the injection well at downgradient of the regional flow, was most sustainable. The gravel layer with high hydraulic conductivity caused a little drawdown despite of an amount of pumping and allowed to stably reinject the used groundwater in all the cases, but it provided a passage transferring the injected heat to the pumping well quickly, particularly in the cases locating the injection well at the upgradient. This thermal interference was more severe in the cases of the short distance between the wells. The high conductive layer is also a reason that the seasonal role conversion of wells for the aquifer thermal energy storage was ineffective in this site. Furthermore, the well distribution vertical to the regional groundwater flow was stable, but not best, and, thus, it may be a good choice in the conditions that the regional
Open-Loop Wide-Bandwidth Phase Modulation Techniques
Directory of Open Access Journals (Sweden)
Nitin Nidhi
2011-01-01
Full Text Available The ever-increasing growth in the bandwidth of wireless communication channels requires the transmitter to be wide-bandwidth and power-efficient. Polar and outphasing transmitter topologies are two promising candidates for such applications, in future. Both these architectures require a wide-bandwidth phase modulator. Open-loop phase modulation presents a viable solution for achieving wide-bandwidth operation. An overview of prior art and recent approaches for phase modulation is presented in this paper. Phase quantization noise cancellation was recently introduced to lower the out-of-band noise in a digital phase modulator. A detailed analysis on the impact of timing and quantization of the cancellation signal is presented. Noise generated by the transmitter in the receive band frequency poses another challenge for wide-bandwidth transmitter design. Addition of a noise transfer function notch, in a digital phase modulator, to reduce the noise in the receive band during phase modulation is described in this paper.
Koh, E. H.; Park, B. H.; Park, J.; Lee, K. K.; Lee, S. Y.
2016-12-01
Open-loop ground source heat pump (GSHP) utilizes groundwater in the subsurface, which maintains constant temperature regardless of seasonal changes, to be circulated through a heat pump system coupled with pumping and injection wells. During operation of the open-loop GSHP facilities, the hydrogeochemical properties of the subsurface aquifer can be altered by contacting with atmospheric air, changing temperature and pressure. Such changes in the water quality can impede energy efficiency of the open-loop GSHP. Therefore, it is important to monitor the groundwater components regularly before and after the operation of GSHP. In the riverside area of the Yangpyeong, South Korea, an open-loop GSHP has been installed for a test research, which has objectives to improve energy efficiency of the open-loop GSHP facilities and to evaluate environmental changes caused by the GSHP operation. Because the study area is located near the Han River, it is necessary to assess hydrochemical changes of groundwater resulted by the open-loop GSHP operation in consideration of interaction between the river water and groundwater. Periodic monitoring of groundwater and river water quality had been conducted from Jan., 2014 to Apr., 2016 including the operation periods of the open-loop GSHP after Apr., 2015. As the result of the open-loop GSHP operation, there were no abrupt changes in groundwater quality parameters except an increase in Cl- concentration and decrease in DO concentration over the study area. The enriched Cl- concentration was observed in both river water and groundwater based on estimation of effects by eutrophication in the river. Lowering DO concentration throughout the study area was affected by re-injection of the pumped groundwater with depleted DO during the GSHP operation with an increase of Fe2+ concentration. Such changes in the water chemistry were evaluated not to give a harmful influence on the long-term operation of the GSHP system in the study area.
High-sensitivity open-loop electronics for gravimetric acoustic-wave-based sensors.
Rabus, David; Friedt, Jean-Michel; Ballandras, Sylvain; Martin, Gilles; Carry, Emile; Blondeau-Patissier, Virginie
2013-06-01
Detecting chemical species in gas phase has recently received an increasing interest mainly for security control, trying to implement new systems allowing for extended dynamics and reactivity. In this work, an open-loop interrogation strategy is proposed to use radio-frequency acoustic transducers as micro-balances for that purpose. The resulting system is dedicated to the monitoring of chemical compounds in gaseous or liquid-phase state. A 16 Hz standard deviation is demonstrated at 125 MHz, with a working frequency band in the 60 to 133 MHz range, answering the requirements for using Rayleigh- and Love-wave-based delay lines operating with 40-μm acoustic wavelength transducers. Moreover, this electronic setup was used to interrogate a high-overtone bulk acoustic wave resonator (HBAR) microbalance, a new sensor class allowing for multi-mode interrogation for gravimetric measurement improvement. The noise source still limiting the system performance is due to the analog-to-digital converter of the microcontroller, thus leaving open degrees-of-freedom for improving the obtained results by optimizing the voltage reference and board layout. The operation of the system is illustrated using a calibrated galvanic deposition at the surface of Love-wave delay lines to assess theoretical predictions of their gravimetric sensitivity and to compare them with HBAR-based sensor sensitivity.
Efficiency Evaluation of Open-Loop GHPS Operation Under Various Hydrogeological Conditions
Lee, S.; Kim, S.; Bae, G.; Lee, K.
2008-12-01
Geothermal heat pump system (GHPS) can be cost-effective renewable energy sources. In order to develop the GHPS which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for effective usage of open-loop GHPS. Experimental and numerical tests are performed for two concepts of open-loop GHPS: simple open-loop and energy storage concept. In simple open-loop sets, tests were performed fixing the locations of pumping and injection wells. In contrast, tests in energy storage sets were conducted by changing the locations of wells in a seasonal cycle. Experimental test using sand tank was performed only for the simple open-loop concept, while numerical tests were performed for the both concepts. Numerical modeling results using FEFLOW were compatible with the experimental results. In the simple open-loop sets, the temporal temperature change in a pumping well was measured. Effective operation conditions are obtained with high hydraulic conductivity (3X10-3 m/s) and long distance (60 cm) between wells on hydraulic gradient 0.025 because the effect of injected water temperature must be minimized. In the energy storage sets, thermal recovery factors (R) under various conditions were calculated to evaluate the efficiency. Low hydraulic conductivity (3X10-5 m/s), hydraulic gradient 0.0 and long well distance (more than 20 m) are the best conditions for operation efficiency (R=37.92) because faster groundwater flow lead to advection or down-gradient `drift' of stored energy beyond potential recovery regions. In the case of two-layered aquifer, the porosity and groundwater flow characteristics of each layer sensitively affected the migration of thermal plume. Two-layered aquifer with the top-layer of low hydraulic conductivity (3X10-5 m/s) and porosity (0.2) is profitable for the effective open-loop GHPS operation under hydraulic gradient 0.0 and well distance (20 m). The results from experimental and numerical tests
A Novel Open-Loop Tracking Strategy for Photovoltaic Systems
Directory of Open Access Journals (Sweden)
Cătălin Alexandru
2013-01-01
Full Text Available This paper approaches a dual-axis equatorial tracking system that is used to increase the photovoltaic efficiency by maximizing the degree of use of the solar radiation. The innovative aspect in the solar tracker design consists in considering the tracking mechanism as a perturbation for the DC motors. The goal is to control the DC motors, which are perturbed with the motor torques whose computation is based on the dynamic model of the mechanical structure on which external forces act. The daily and elevation angles of the PV module represent the input parameters in the mechanical device, while the outputs transmitted to the controller are the motor torques. The controller tuning is approached by a parametric optimization process, using design of experiments and response surface methodology techniques, in a multiple regression. The simulation and experimental results demonstrate the operational performance of the tracking system.
A novel open-loop tracking strategy for photovoltaic systems.
Alexandru, Cătălin
2013-01-01
This paper approaches a dual-axis equatorial tracking system that is used to increase the photovoltaic efficiency by maximizing the degree of use of the solar radiation. The innovative aspect in the solar tracker design consists in considering the tracking mechanism as a perturbation for the DC motors. The goal is to control the DC motors, which are perturbed with the motor torques whose computation is based on the dynamic model of the mechanical structure on which external forces act. The daily and elevation angles of the PV module represent the input parameters in the mechanical device, while the outputs transmitted to the controller are the motor torques. The controller tuning is approached by a parametric optimization process, using design of experiments and response surface methodology techniques, in a multiple regression. The simulation and experimental results demonstrate the operational performance of the tracking system.
On Stability of Open-Loop Operation without Rotor Information for Brushless DC Motors
Directory of Open Access Journals (Sweden)
Zhong Wu
2014-01-01
Full Text Available Open-loop operation mode is often used to control the Brushless DC Motors (BLDCMs without rotor position sensors when the back electromotive force (EMF is too weak due to the very low rotor velocity. The rotor position information is not necessary in this mode and the stator windings are supplied with voltages under a certain ratio of the amplitude to the frequency. However, the rotor synchronization will be destroyed once if the commutation instant is inappropriate. In order to improve the reliability of the open-loop operation mode, a dynamic equation is established to represent the synchronization error between the rotor and the stator. Thereafter, the stability of the open-loop control mode is analyzed by using Lyapunov indirect method. Theoretical analysis indicates that the open-loop control mode is asymptotically stable only when the commutation instant of the stator current lags behind the ideal one suitably. Finally, theoretical analysis is verified through the experimental results of a certain BLDCM.
Integrated open loop control and design of a food storage room
van Mourik, S.; Zwart, Heiko J.; Keesman, K.J.
2009-01-01
Usually, control design in a food storage room takes place after the plant has been designed. However, the performance of the plant connected to the controller might be improved by simultaneous design of the plant and the controller. In the case of open loop control, expressions that describe the
Uniqueness Conditions for the Infinite-Planning Horizon Open-Loop Linear Quadratic Differential Game
Engwerda, J.C.
2005-01-01
In this note we consider the open-loop Nash linear quadratic differential game with an infinite planning horizon.The performance function is assumed to be indefinite and the underlying system affine.We derive both necessary and sufficient conditions under which this game has a unique Nash
Modelling and analysis of an open-loop induction motor drive ...
Indian Academy of Sciences (India)
... study the influence of inverter dead-time on steady as well as dynamic operation of an open-loop induction motor drive fed from a voltage source inverter (VSI). Towards this goal, this paper presents a systematic derivation of a dynamic model for an inverter-fed induction motor, incorporating the effect of inverter dead-time, ...
Zhang, Xu-lin; Ma, Hui-Iian; Jin, Zhong-he; Ding, Chun
2006-11-01
A detection system in the resonator fiber-optic gyro is set up by the phase modulation (PM) spectroscopy technique. The slope of the demodulated curve near the resonant point is found to affect the ultimate sensitivity of the gyro. To maximize the demodulated signal slope, the modulation frequency and index are optimized by the expansion of the Bessel function and optical field overlapping method. Using different PM frequencies for the light waves, the open-loop gyro output signal is observed. The modulation frequency in this PM technique is limited only by the cutoff frequency of the LiNbO3 phase modulators, which can reach several gigahertz. This detection technique and system can be applied to the resonator micro-optic gyro with a less than 10 cm long integrated optical ring.
Design of a Dual-Band Bandpass Filter Using an Open-Loop Resonator
Directory of Open Access Journals (Sweden)
Hyun-Seo Im
2017-10-01
Full Text Available In this paper, we present a novel design for a dual-band bandpass filter (BPF based on the conventional second-order, open-loop BPF. By adding series resonant circuits to the open ends of the resonator, we can create two resonant modes from the even and odd modes. One pair of the even and odd modes constitutes the upper passband, while the other pair constitutes the lower passband. By adding another series resonant circuit to the open-loop resonator, we can control the bandwidth of either the upper passband or the lower passband. We can replace the series resonant circuits with simple microstrip line resonators. A dual-band BPF working at both Wi-Fi bands (2.4 GHz and 5.8 GHz bands is designed based on the proposed method and is tested. The measured and simulated results show excellent agreement.
Real-time open-loop frequency response analysis of flight test data
Bosworth, J. T.; West, J. C.
1986-01-01
A technique has been developed to compare the open-loop frequency response of a flight test aircraft real time with linear analysis predictions. The result is direct feedback to the flight control systems engineer on the validity of predictions and adds confidence for proceeding with envelope expansion. Further, gain and phase margins can be tracked for trends in a manner similar to the techniques used by structural dynamics engineers in tracking structural modal damping.
Modelling of Wheat-Flour Dough Mixing as an Open-Loop Hysteretic Process
Czech Academy of Sciences Publication Activity Database
Anderssen, R.; Kružík, Martin
2013-01-01
Roč. 18, č. 2 (2013), s. 283-293 ISSN 1531-3492 R&D Projects: GA AV ČR IAA100750802 Keywords : Dissipation * Dough mixing * Rate-independent systems Subject RIV: BA - General Mathematics Impact factor: 0.628, year: 2013 http://library.utia.cas.cz/separaty/2013/MTR/kruzik-modelling of wheat-flour dough mixing as an open-loop hysteretic process.pdf
The Life Cycle Evaluation Model of External Diseconomy of Open-loop Supply Chain
Liu, Qian; Hu, Tianjun
2017-08-01
In recent years, with the continuous deterioration of pollution, resource space is gradually narrowed, the number of waste items increased, people began to use the method of recycling on waste products to ease the pressure on the environment. This paper adopted the external diseconomy of open-loop supply chain as the research object and constructed the model by the life cycle evaluation method, comparative analysis through the case. This paper also concludes that the key to solving the problem is to realize the closed-loop supply chain and building reverse logistics system is of great significance.
Groom, Nelson J.; Britcher, Colin P.
1992-01-01
The open-loop characteristics of a Large-Gap Magnetic Suspension System (LGMSS) were studied and numerical results are presented. The LGMSS considered provides five-degree-of-freedom control. The suspended element is a cylinder that contains a core composed of permanent magnet material. The magnetic actuators are air core electromagnets mounted in a planar array. Configurations utilizing five, six, seven, and eight electromagnets were investigated and all configurations were found to be controllable from coil currents and observable from suspended element positions. Results indicate that increasing the number of coils has an insignificant effect on mode shapes and frequencies.
Compact and robust open-loop fiber-optic gyroscope for applications in harsh environments
Moslehi, Behzad M.; Yahalom, Ram; Faridian, Ferey; Black, Richard J.; Taylor, Edward W.; Ooi, Teng; Corder, Aaron
2010-09-01
Next generation navigation systems demand performance enhancements to support new applications with longer range capabilities, provide robust operation in severe thermal and vibration environments while simultaneously reducing weight, size and power dissipation. Compact, inexpensive, advanced guidance components are essential for such applications. In particular, Inertial Reference Units (IRUs) that can provide high-resolution stabilization and accurate inertial pointing knowledge are needed. For space applications, an added requirement is radiation hardening up to 300 krad over 5 to 15 years. Manufacturing specifications for the radiation-induced losses are not readily available and empirical test data is required for all components in order to optimize the system performance. Interferometric Fiber-Optic Gyroscopes (IFOGs) have proven to be a leading technology for tactical and navigational systems. The sensors have no moving parts. This ensures high reliability and a long life compared to the mechanical gyroscopes and dithered ring laser gyroscopes. However, the available architectures limit the potential size and cost of the IFOG. The work reported here describes an innovative approach for the design, fabrication, and testing of the IFOG and enables the production of a small, robust and low cost gyro with excellent noise and bandwidth characteristics with high radiation tolerance. The development is aimed at achieving a sensor volume gyro uses an open loop configuration, utilizes extremely small diameter radiation-hard fiber with customized all-digital signal processing. The optics is packaged using a combination of highly-integrated optical component assemblies with an allfiber approach that leads to a more flexible yet lower cost optical design. The IFOS gyro prototypes are implemented using a distributed architecture, where the light source, electronics and receiver are integrated in an external package, while the sensor head is integrated in a robust and
Open-Loop Performance of COBALT Precision Landing Payload on a Commercial Sub-Orbital Rocket
Restrepo, Carolina I.; Carson, John M., III; Amzajerdian, Farzin; Seubert, Carl R.; Lovelace, Ronney S.; McCarthy, Megan M.; Tse, Teming; Stelling, Richard; Collins, Steven M.
2018-01-01
An open-loop flight test campaign of the NASA COBALT (CoOperative Blending of Autonomous Landing Technologies) platform was conducted onboard the Masten Xodiac suborbital rocket testbed. The COBALT platform integrates NASA Guidance, Navigation and Control (GN&C) sensing technologies for autonomous, precise soft landing, including the Navigation Doppler Lidar (NDL) velocity and range sensor and the Lander Vision System (LVS) Terrain Relative Navigation (TRN) system. A specialized navigation filter running onboard COBALT fuses the NDL and LVS data in real time to produce a navigation solution that is independent of GPS and suitable for future, autonomous, planetary, landing systems. COBALT was a passive payload during the open loop tests. COBALT's sensors were actively taking data and processing it in real time, but the Xodiac rocket flew with its own GPS-navigation system as a risk reduction activity in the maturation of the technologies towards space flight. A future closed-loop test campaign is planned where the COBALT navigation solution will be used to fly its host vehicle.
Innovative hybrid pile oscillator technique in the Minerve reactor: open loop vs. closed loop
Geslot, Benoit; Gruel, Adrien; Bréaud, Stéphane; Leconte, Pierre; Blaise, Patrick
2018-01-01
Pile oscillator techniques are powerful methods to measure small reactivity worth of isotopes of interest for nuclear data improvement. This kind of experiments has long been implemented in the Mineve experimental reactor, operated by CEA Cadarache. A hybrid technique, mixing reactivity worth estimation and measurement of small changes around test samples is presented here. It was made possible after the development of high sensitivity miniature fission chambers introduced next to the irradiation channel. A test campaign, called MAESTRO-SL, took place in 2015. Its objective was to assess the feasibility of the hybrid method and investigate the possibility to separate mixed neutron effects, such as fission/capture or scattering/capture. Experimental results are presented and discussed in this paper, which focus on comparing two measurements setups, one using a power control system (closed loop) and another one where the power is free to drift (open loop). First, it is demonstrated that open loop is equivalent to closed loop. Uncertainty management and methods reproducibility are discussed. Second, results show that measuring the flux depression around oscillated samples provides valuable information regarding partial neutron cross sections. The technique is found to be very sensitive to the capture cross section at the expense of scattering, making it very useful to measure small capture effects of highly scattering samples.
Open loop, auto reversing liquid nitrogen circulation thermal system for thermo vacuum chamber
International Nuclear Information System (INIS)
Naidu, M C A; Nolakha, Dinesh; Saharkar, B S; Kavani, K M; Patel, D R
2012-01-01
In a thermo vacuum chamber, attaining and controlling low and high temperatures (-100 Deg. C to +120 Deg. C) is a very important task. This paper describes the development of 'Open loop, auto reversing liquid nitrogen based thermal system'. System specifications, features, open loop auto reversing system, liquid nitrogen flow paths etc. are discussed in this paper. This thermal system consists of solenoid operated cryogenic valves, double embossed thermal plate (shroud), heating elements, temperature sensors and PLC. Bulky items like blowers, heating chambers, liquid nitrogen injection chambers, huge pipe lines and valves were not used. This entire thermal system is very simple to operate and PLC based, fully auto system with auto tuned to given set temperatures. This system requires a very nominal amount of liquid nitrogen (approx. 80 liters / hour) while conducting thermo vacuum tests. This system was integrated to 1.2m dia thermo vacuum chamber, as a part of its augmentation, to conduct extreme temperature cycling tests on passive antenna reflectors of satellites.
Innovative hybrid pile oscillator technique in the Minerve reactor: open loop vs. closed loop
Directory of Open Access Journals (Sweden)
Geslot Benoit
2018-01-01
Full Text Available Pile oscillator techniques are powerful methods to measure small reactivity worth of isotopes of interest for nuclear data improvement. This kind of experiments has long been implemented in the Mineve experimental reactor, operated by CEA Cadarache. A hybrid technique, mixing reactivity worth estimation and measurement of small changes around test samples is presented here. It was made possible after the development of high sensitivity miniature fission chambers introduced next to the irradiation channel. A test campaign, called MAESTRO-SL, took place in 2015. Its objective was to assess the feasibility of the hybrid method and investigate the possibility to separate mixed neutron effects, such as fission/capture or scattering/capture. Experimental results are presented and discussed in this paper, which focus on comparing two measurements setups, one using a power control system (closed loop and another one where the power is free to drift (open loop. First, it is demonstrated that open loop is equivalent to closed loop. Uncertainty management and methods reproducibility are discussed. Second, results show that measuring the flux depression around oscillated samples provides valuable information regarding partial neutron cross sections. The technique is found to be very sensitive to the capture cross section at the expense of scattering, making it very useful to measure small capture effects of highly scattering samples.
Characterization of Site for Installing Open Loop Ground Source Heat Pump System
Yun, S. W.; Park, Y.; Lee, J. Y.; Yi, M. J.; Cha, J. H.
2014-12-01
This study was conducted to understand hydrogeological properties of site where open loop ground source heat pump system will be installed and operated. Groundwater level and water temperature were hourly measured at the well developed for usage of open loop ground source heat pump system from 11 October 2013 to 8 January 2014. Groundwater was sampled in January and August 2013 and its chemical and isotopic compositions were analyzed. The bedrock of study area is the Jurassic granodiorite that mainly consists of quartz (27.9 to 46.8%), plagioclase (26.0 to 45.5%), and alkali feldspar (9.5 to 18.7%). The groundwater level ranged from 68.30 to 68.94 m (above mean sea level). Recharge rate was estimated using modified watertable fluctuation method and the recharge ratios was 9.1%. The water temperature ranged from 14.8 to 15.0oC. The vertical Increase rates of water temperature were 1.91 to 1.94/100 m. The water temperature showed the significant seasonal variation above 50 m depth, but had constant value below 50 m depth. Therefore, heat energy of the groundwater can be used securely in open loop ground source heat pump system. Electrical conductivity ranged from 120 to 320 µS/cm in dry season and from 133 to 310 µS/cm in wet season. The electrical conductivity gradually decreased with depth. In particular, electrical conductivity in approximately 30 m depth decreased dramatically (287 to 249 µS/cm) in wet season. The groundwater was Ca-HCO3 type. The concentrations of dissolved components did not show the vertically significant variations from 0 to 250 m depth. The δ18O and δD ranged from -9.5 to -9.4‰ and from -69 to -68‰. This work is supported by the New and Renewable Energy of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy (No.20123040110010).
Modeling Open-Loop MEMS Tunneling Accelerometer Based on Circular Plate
Directory of Open Access Journals (Sweden)
Hossein Jodat Kordlar
2007-04-01
Full Text Available In this paper open-loop MEMS tunneling accelerometer was modeled based on a clamped micro circular plate with a tip tunneling at its centre. Mechanical behavior of the micro plate was studied deriving governing equation based on classic Kirchhoff thin plate theory and it was discretized using Galerkin method. Dynamic response of the proposed accelerometer due to step and harmonic external excitation was studied and the magnitude of the applied acceleration was identified by measuring of the changing of tunneling current. Obtained results show that the proposed tunneling accelerometer very sensitive and it can be measure acceleration with very high resolution but very small gap of tip tunneling limit the range of measurable acceleration.
Huang, Yonglin; Zhang, Shiyan
2014-07-01
A fiber Bragg grating (FBG) sensor for simultaneous measurement of temperature and force is proposed and demonstrated. Where a part of uniform FBG (about one half length of an FBG) is attached on the polymer open loop, the FBG is divided into two parts which has an equal length. So the two parts can be regarded as two FBGs. Because of the difference of the Young's modulus and the thermal expansion coefficients for two parts of the FBG, the two Bragg reflection wavelengths are shift when the temperature and force are applied on the sensor. Simultaneous measurement of temperature and force is demonstrated experimentally. The experimental results show that the linear response to temperature and force are achieved. The value of applied temperature and force can be obtained from the two Bragg wavelength shift via the coefficient matrix. This study provides a simple and economical method to measure temperature and force simultaneously.
Open-loop groundwater heat pumps development for large buildings. A case study
Energy Technology Data Exchange (ETDEWEB)
Lo Russo, Stefano; Civita, Massimo Vincenzo [Politecnico di Torino, Dipartimento di Ingegneria del Territorio, dell' Ambiente e delle Geotecnologie (DITAG), Corso Duca degli Abruzzi, 24 - 10129 Torino (Italy)
2009-09-15
A study of the feasibility of providing the heating and cooling needs of the new, large commercial building near Turin, Italy, by means of an open-loop indirect groundwater heat pump (GWHP) system is described. A finite element subsurface flow and transport simulator (FEFLOW) was used to investigate possible configurations of extraction and injection wells for five different scenarios. Modelling results confirmed the hydrogeological capacity of the site to provide the necessary amount of groundwater and associated energy with limited environmental impact. Injection of warmer (or cooler) water in the aquifer creates a thermal plume whose dimensions and geometry depend on the properties of the subsurface formations, particularly their thermal dispersivity values. The study suggests that there are several possible well configurations that could support the GWHP system without adversely affecting the aquifer. (author)
Purdy, K. R.; Ventrice, M. B.; Fang, J.
1972-01-01
Analytical and experimental studies were initiated to determine if the response of a constant temperature hot wire anemometer to acoustic oscillations could serve as an analog to the response of the drop vaporization burning rate process to acoustic oscillations, and, perhaps, also as an analog to any Reynolds number dependent process. The motivation behind this study was a recent analytical study which showed that distorted acoustic oscillations could amplify the open-loop response of vaporization limited combustion. This type of amplification may be the cause of unstable combustion in liquid propellant rocket engines. The analytical results obtained for the constant temperature anemometer are similar in nature to those previously obtained for vaporization limited combustion and indicate that the response is dependent on the amount and type of distortion as well as other factors, such as sound pressure level, Mach number and hot wire temperature. Preliminary results indicate qualitative agreement between theory and experiment.
Jeon, W. H.; Kim, N.; Lee, J. Y.
2014-12-01
This study aims to evaluate the influence of open loop ground source heat pump systems operation on hydrological conditions of aquifer. Test bed is located in Chuncheon, Korea. The step drawdown test was conducted in five stages for 300 minutes. The variation of groundwater levels by open loop ground source heat pump systems operation was estimated using Visual MODFLOW. Transmissivity ranged from 2.02×10-4 to 9.36×10-4, and storage coefficient ranged from 0.00067 to 0.021. The amount of optimum bleeding was calculated to be 240 m3/day. When bleeding will be 50, 90, 240 and 450 m3/day for 5 years, groundwater levels may decrease 1.84, 3.31, 8.89 and 17.0 m, respectively. If the amount of bleeding is 50 m3/day, the influence of bleeding will not reach the boundary regions of the Soyang River after 5 years. Regarding the open loop ground source heat pump system installed at the test bed, the amount of optimum bleeding in accordance with the stand are proposed by the government is 90 m3/day, which is 20% of the 450 m3/day circulation quantity of the system. However, if continuous bleeding of more than 90 m3/day occurs, then the radius of influence is expected to reach the boundary regions of the Soyang River after 5 years. These results indicate that amount of optimum bleeding differ in each open loop ground soured heat pump system. Therefore, the debate for the amount of optimum bleeding in open loop ground source heat pump systems is demanded. This work is supported by the Energy Efficiency and Resources of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy (No.20123040110010).
dc SQUID electronics based on adaptive noise cancellation and a high open-loop gain controller
International Nuclear Information System (INIS)
Seppae, H.
1992-01-01
A low-noise SQUID readout electronics with a high slew rate and an automatic gain control feature has been developed. Flux noise levels of 5x10 -7 Φ 0 /√Hz at 1 kHz and 2x10 -6 Φ 0 /√Hz at 1 Hz have been measured with this readout scheme. The system tolerates sinusoidal disturbances having amplitudes up to 140 Φ 0 at 1 kHz without loosing lock. The electronics utilizes a cooled GaAs FET to control the cancellation of the voltage noise of the room temperature amplifier, a PI 3/2 controller to provide a high open-loop gain at low frequencies, and a square-wave flux and offset voltage modulation to enable automatic control of the noise reduction. The cutoff frequency of the flux-locked-loop is 300 kHz and the feedback gain is more than 130 dB at 10 Hz. (orig.)
Open Loop Heat Pipe Radiator Having a Free-Piston for Wiping Condensed Working Fluid
Weinstein, Leonard M. (Inventor)
2015-01-01
An open loop heat pipe radiator comprises a radiator tube and a free-piston. The radiator tube has a first end, a second end, and a tube wall, and the tube wall has an inner surface and an outer surface. The free-piston is enclosed within the radiator tube and is capable of movement within the radiator tube between the first and second ends. The free-piston defines a first space between the free-piston, the first end, and the tube wall, and further defines a second space between the free-piston, the second end, and the tube wall. A gaseous-state working fluid, which was evaporated to remove waste heat, alternately enters the first and second spaces, and the free-piston wipes condensed working fluid from the inner surface of the tube wall as the free-piston alternately moves between the first and second ends. The condensed working fluid is then pumped back to the heat source.
Open-Loop Flight Testing of COBALT GN&C Technologies for Precise Soft Landing
Carson, John M., III; Amzajerdian, Farzin; Seubert, Carl R.; Restrepo, Carolina I.
2017-01-01
A terrestrial, open-loop (OL) flight test campaign of the NASA COBALT (CoOperative Blending of Autonomous Landing Technologies) platform was conducted onboard the Masten Xodiac suborbital rocket testbed, with support through the NASA Advanced Exploration Systems (AES), Game Changing Development (GCD), and Flight Opportunities (FO) Programs. The COBALT platform integrates NASA Guidance, Navigation and Control (GN&C) sensing technologies for autonomous, precise soft landing, including the Navigation Doppler Lidar (NDL) velocity and range sensor and the Lander Vision System (LVS) Terrain Relative Navigation (TRN) system. A specialized navigation filter running onboard COBALT fuzes the NDL and LVS data in real time to produce a precise navigation solution that is independent of the Global Positioning System (GPS) and suitable for future, autonomous planetary landing systems. The OL campaign tested COBALT as a passive payload, with COBALT data collection and filter execution, but with the Xodiac vehicle Guidance and Control (G&C) loops closed on a Masten GPS-based navigation solution. The OL test was performed as a risk reduction activity in preparation for an upcoming 2017 closed-loop (CL) flight campaign in which Xodiac G&C will act on the COBALT navigation solution and the GPS-based navigation will serve only as a backup monitor.
An open-loop RFOG based on harmonic division technique to suppress LD's intensity modulation noise
Ying, Diqing; Wang, Zeyu; Mao, Jianmin; Jin, Zhonghe
2016-11-01
A harmonic division technique is proposed for an open-loop resonator fiber optic gyro (RFOG) to suppress semiconductor laser diode's (LD's) intensity modulation noise. The theoretical study indicates the RFOG with this technique is immune to the intensity noise. The simulation and experimental results show this technique would lead to a diminished linear region, which still could be acceptable for an RFOG applied to low rotation rate detection. The tests for the gyro output signal are carried out with/without noise suppressing methods, including the harmonic division technique and previously proposed signal compensation technique. With the harmonic division technique at the rotation rate of 10 deg/s, the stability of gyro output signal is improved from 1.07 deg/s to 0.0361 deg/s, whose noise suppressing ratio is more than 3 times as that of the signal compensation technique. And especially, a 3.12 deg/s signal jump is significantly removed with the harmonic division technique; in contrast, a residual 0.36 deg/s signal jump still exists with the signal compensation technique. It is concluded the harmonic division technique does work in intensity noise suppressing under dynamic condition, and it is superior to the signal compensation technique.
A general transfer-function approach to noise filtering in open-loop quantum control
Viola, Lorenza
2015-03-01
Hamiltonian engineering via unitary open-loop quantum control provides a versatile and experimentally validated framework for manipulating a broad class of non-Markovian open quantum systems of interest, with applications ranging from dynamical decoupling and dynamically corrected quantum gates, to noise spectroscopy and quantum simulation. In this context, transfer-function techniques directly motivated by control engineering have proved invaluable for obtaining a transparent picture of the controlled dynamics in the frequency domain and for quantitatively analyzing performance. In this talk, I will show how to identify a computationally tractable set of ``fundamental filter functions,'' out of which arbitrary filter functions may be assembled up to arbitrary high order in principle. Besides avoiding the infinite recursive hierarchy of filter functions that arises in general control scenarios, this fundamental set suffices to characterize the error suppression capabilities of the control protocol in both the time and frequency domain. I will show, in particular, how the resulting notion of ``filtering order'' reveals conceptually distinct, albeit complementary, features of the controlled dynamics as compared to the ``cancellation order,'' traditionally defined in the Magnus sense. Implications for current quantum control experiments will be discussed. Work supported by the U.S. Army Research Office under Contract No. W911NF-14-1-0682.
International Nuclear Information System (INIS)
Nguyen, Phuong-Bac; Choi, Seung-Bok
2010-01-01
This paper proposes a novel hysteresis compensator to enhance control accuracy in open-loop position tracking control of a piezoceramic flexible beam. The proposed hysteresis compensator consists of two components: a rate-independent hysteresis compensator and a nonlinear filter. The compensator is formulated based on the inverse Preisach model, while the weight coefficients of the filter are identified adaptively using a recursive least square (RLS) algorithm. In this work, two dynamic hysteresis compensators (or rate-independent hysteresis compensators) are developed by adopting two different nonlinear filters: Volterra and bilinear filters. In order to demonstrate the improved control accuracy of the proposed dynamic compensators, a flexible beam associated with the piezoceramic actuator is modeled using the finite element method (FEM) and Euler–Bernoulli beam theory. The beam model is then integrated with the proposed hysteresis model to achieve accurate position tracking control at the tip of the beam. An experimental investigation on the tip position tracking control is undertaken by realizing three different hysteresis compensators: a rate-independent hysteresis compensator, a rate-dependent hysteresis compensator with a Volterra nonlinear filter and a rate-independent hysteresis compensator with a bilinear nonlinear filter. It is shown that the proposed dynamic hysteresis compensators can provide much better tracking control accuracy than conventional rate-independent hysteresis compensators
A Control Law Definition of the Open Loop Stepping Electric Drive
Directory of Open Access Journals (Sweden)
A. B. Krasovskii
2015-01-01
Full Text Available The paper considers an open loop stepping electric drive (SEP with electric crushing of a step and motor fed from the controlled current invertor which should meet the requirement that is to trial a free-form guided trajectory with a split-hair accuracy. It is shown that with traditional programmed control, when the SEP forms motor phase currents of identical amplitude and variable frequency proportional to the set speed of movement, there may be considerable errors reducing a trial accuracy of the set movement trajectory, dynamic indicators provoking oscillatory processes, and even loss of motor synchronism because influence on a dynamic moment of the motor is impossible.The paper offers and proves a new way to define a control algorithm adequate to drive parameters and programmed trajectory of movement, providing error minimization and thereby increasing trial accuracy of set parameters of movement and expanding dynamic capabilities of a drive. The essence of the offered way is to use a modified mathematical model of a drive in d,q coordinates with a motor fed by the current source. In this model a programmed trajectory of movement is chosen as an input action while solving the appropriate equations defines the necessary law of control. The paper describes a developed simulation model of the stepping electric drive in the environment of MATLAB – SIMULINK, which has been used to verify and prove an efficiency of the offered method to define a control law via typical examples.It is established that no error trial of set movement trajectory in case it has breaks (jogs is technically unfeasible, as it demands an infinitely high forcing voltage of the power supply to maintain the instant positive or negative phase shifts of currents formed in the motor windings.The obtained results can be used in designing programmable precision SEPs in robots, numerically controlled machine tools, and assembly equipment.
International Nuclear Information System (INIS)
K.G. Mon; P.K. Mast; R. Howard; J.H. Lee
1999-01-01
The purpose of this calculation is to document (1) the Waste Package Degradation (WAPDEG) version 3.09 (CRWMS M and O 1998b). Software Routine Report for WAPDEG (Version 3.09) simulations used to analyze waste package degradation and failure under the repository exposure conditions characterized by the open loop option of the post-closure ventilation design and, (2) post-processing of these results into tables of waste package degradation time histories suitable for use as input into the Integrated Probabilistic Simulator for Environmental Systems version 5.19.0 1 (RIP) computer program (Golder Associates 1998). Specifically, the WAPDEG simulations discussed in this calculation correspond to waste package emplacement conditions (repository environment and design) defined in the Total System Performance Assessment-Viability Assessment (TSPA-VA), with the exception that the open loop option of the post-closure ventilation License Application Design Selection (LADS) Design Alternative (Design Alternative 3b) was analyzed. The open loop post-closure ventilation design alternative, under which airways to the surface remain open after repository closure, could result in substantial cooling and drying of the potential repository. In open loop post-closure ventilation, expanded air heated by waste decay would move up an exhaust shaft, pulling denser, cooler air into the repository through intake shafts. The exchange of air with the atmosphere could remove more heat and moisture. As a result of the enhanced ventilation relative to the TSPA-VA base-case design, different temperature and relative humidity time histories at the waste package surface are calculated (input to the WAPDEG simulations), and consequently different waste package failure histories (as calculated by WAPDEG) result
A New Open-Loop Fiber Optic Gyro Error Compensation Method Based on Angular Velocity Error Modeling
Zhang, Yanshun; Guo, Yajing; Li, Chunyu; Wang, Yixin; Wang, Zhanqing
2015-01-01
With the open-loop fiber optic gyro (OFOG) model, output voltage and angular velocity can effectively compensate OFOG errors. However, the model cannot reflect the characteristics of OFOG errors well when it comes to pretty large dynamic angular velocities. This paper puts forward a modeling scheme with OFOG output voltage and temperature as the input variables and angular velocity error as the output variable. Firstly, the angular ve...
National Research Council Canada - National Science Library
Miller, Gary
2003-01-01
This report presents the results of Project HAVE TRIM, An Investigation of Open Loop Flight Control Equations of Motion Used To Predict Flight Control Surface Deflections at Non-Steady State Trim Conditions...
Directory of Open Access Journals (Sweden)
Qixin Zhu
2017-01-01
Full Text Available The precision of initial rotor position detection is critical for the start and running performance of permanent magnet synchronous motor (PMSM. This work describes a new open loop approach for identifying the initial position of a PMSM with an incremental encoder, even when a constant load torque is being applied. By giving a testing current with high frequency to the stator winding, the initial rotor position of a PMSM can be detected with reasonable accuracy. The rotor almost does not move during the process of identification. The FFT algorithms are used to remove the phase bias effects in identification. Our approach is quicker and simpler than the conventional approaches.
Morphing Wing-Tip Open Loop Controller and its Validation During Wind Tunnel Tests at the IAR-NRC
Directory of Open Access Journals (Sweden)
Mohamed Sadok GUEZGUEZ
2016-09-01
Full Text Available In this project, a wing tip of a real aircraft was designed and manufactured. This wing tip was composed of a wing and an aileron. The wing was equipped with a composite skin on its upper surface. This skin changed its shape (morphed by use of 4 electrical in-house developed actuators and 32 pressure sensors. These pressure sensors measure the pressures, and further the loads on the wing upper surface. Thus, the upper surface of the wing was morphed using these actuators with the aim to improve the aerodynamic performances of the wing-tip. Two types of ailerons were designed and manufactured: one aileron is rigid (non-morphed and one morphing aileron. This morphing aileron can change its shape also for the aerodynamic performances improvement. The morphing wing-tip internal structure is designed and manufactured, and is presented firstly in the paper. Then, the modern communication and control hardware are presented for the entire morphing wing tip equipped with actuators and sensors having the aim to morph the wing. The calibration procedure of the wing tip is further presented, followed by the open loop controller results obtained during wind tunnel tests. Various methodologies of open loop control are presented in this paper, and results obtained were obtained and validated experimentally through wind tunnel tests.
McDermid, Richard M.; Krajnovic, Davor; Cappellari, Michele; Trujillo, Chadwick; Christou, Julian; Davies, Roger L.
2010-07-01
We present observations of early-type galaxies with laser guide star adaptive optics (LGS AO) obtained at Gemini North telescope using the NIFS integral field unit (IFU). We employ an innovative technique where the focus compensation due to the changing distance to the sodium layer is made 'open loop', allowing the extended galaxy nucleus to be used only for tip-tilt correction. The purpose of these observations is to determine high spatial resolution stellar kinematics within the nuclei of these galaxies to determine the masses of the super-massive black holes. The resulting data have spatial resolution of 0.2" FWHM or better. This is sufficient to positively constrain the presence of the central black hole in even low-mass early-type galaxies, suggesting that larger samples of such objects could be observed with this technique in the future. The open-loop focus correction technique is a supported queue-observing mode at Gemini, significantly extending the sky coverage in particular for faint, extended guide sources. We also provide preliminary results from tests combining tip/tilt correction from the Gemini peripheral guider with on-axis LGS. The current test system demonstrates feasibility of this mode, providing about a factor 2-3 improvement over natural seeing. With planned upgrades to the peripheral wave-front sensor, we hope to provide close to 100% sky coverage with low Strehl corrections, or 'improved seeing', significantly increasing flux concentration for deep field and extended object studies.
A LabVIEW model incorporating an open-loop arterial impedance and a closed-loop circulatory system.
Cole, R T; Lucas, C L; Cascio, W E; Johnson, T A
2005-11-01
While numerous computer models exist for the circulatory system, many are limited in scope, contain unwanted features or incorporate complex components specific to unique experimental situations. Our purpose was to develop a basic, yet multifaceted, computer model of the left heart and systemic circulation in LabVIEW having universal appeal without sacrificing crucial physiologic features. The program we developed employs Windkessel-type impedance models in several open-loop configurations and a closed-loop model coupling a lumped impedance and ventricular pressure source. The open-loop impedance models demonstrate afterload effects on arbitrary aortic pressure/flow inputs. The closed-loop model catalogs the major circulatory waveforms with changes in afterload, preload, and left heart properties. Our model provides an avenue for expanding the use of the ventricular equations through closed-loop coupling that includes a basic coronary circuit. Tested values used for the afterload components and the effects of afterload parameter changes on various waveforms are consistent with published data. We conclude that this model offers the ability to alter several circulatory factors and digitally catalog the most salient features of the pressure/flow waveforms employing a user-friendly platform. These features make the model a useful instructional tool for students as well as a simple experimental tool for cardiovascular research.
de La Bernardie, Jérôme; de Dreuzy, Jean-Raynald; Bour, Olivier; Thierion, Charlotte; Ausseur, Jean-Yves; Lesuer, Hervé; Le Borgne, Tanguy
2016-04-01
Geothermal energy is a renewable energy source particularly attractive due to associated low greenhouse gas emission rates. Crystalline rocks are in general considered of poor interest for geothermal applications at shallow depths (energy storage at these shallow depths is still remaining very challenging because of the complexity of fractured media. The purpose of this study is to test the possibility of efficient thermal energy storage in shallow fractured rocks with a single well semi open loop heat exchanger (standing column well). For doing so, a simplified numerical model of fractured media is considered with few fractures. Here we present the different steps for building the model and for achieving the sensitivity analysis. First, an analytical and dimensional study on the equations has been achieved to highlight the main parameters that control the optimization of the system. In a second step, multiphysics software COMSOL was used to achieve numerical simulations in a very simplified model of fractured media. The objective was to test the efficiency of such a system to store and recover thermal energy depending on i) the few parameters controlling fracture network geometry (size and number of fractures) and ii) the frequency of cycles used to store and recover thermal energy. The results have then been compared to reference shallow geothermal systems already set up for porous media. Through this study, relationships between structure, heat exchanges and storage may be highlighted.
Wang, Yuan-Jay
2014-03-01
This paper proposes a novel alternative method to graphically compute all feasible gain and phase margin specifications-oriented robust PID controllers for open-loop unstable plus time delay (OLUPTD) processes. This method is applicable to general OLUPTD processes without constraint on system order. To retain robustness for OLUPTD processes subject to positive or negative gain variations, the downward gain margin (GM(down)), upward gain margin (GM(up)), and phase margin (PM) are considered. A virtual gain-phase margin tester compensator is incorporated to guarantee the concerned system satisfies certain robust safety margins. In addition, the stability equation method and the parameter plane method are exploited to portray the stability boundary and the constant gain margin (GM) boundary as well as the constant PM boundary. The overlapping region of these boundaries is graphically determined and denotes the GM and PM specifications-oriented region (GPMSOR). Alternatively, the GPMSOR characterizes all feasible robust PID controllers which achieve the pre-specified safety margins. In particular, to achieve optimal gain tuning, the controller gains are searched within the GPMSOR to minimize the integral of the absolute error (IAE) or the integral of the squared error (ISE) performance criterion. Thus, an optimal PID controller gain set is successfully found within the GPMSOR and guarantees the OLUPTD processes with a pre-specified GM and PM as well as a minimum IAE or ISE. Consequently, both robustness and performance can be simultaneously assured. Further, the design procedures are summarized as an algorithm to help rapidly locate the GPMSOR and search an optimal PID gain set. Finally, three highly cited examples are provided to illustrate the design process and to demonstrate the effectiveness of the proposed method. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.
Wolf, Derek N; Schearer, Eric M
2017-07-01
Functional electrical stimulation (FES) is a promising solution for restoring functional motion to individuals with paralysis, but the potential for achieving full-arm reaching motions with FES for various desired tasks has not been realized. We present an open-loop controller capable of calculating and applying the necessary muscle stimulations to hold the wrist of an individual with high tetraplegia at any desired position. We used the controller to hold the wrist at a series of static positions. The controller was capable of discriminating between different wrist positions. The average distance to the target wrist position, or accuracy, was 7.7 cm. The average radius of the 95% confidence ellipsoid for a set of trials with the same muscle stimulations, or precision, was 6.7 cm. Adding feedback or online model updates will likely improve the accuracy for tasks requiring finer control. The controller is a good first step to controlling full-arm motions with FES.
Open-loop frequency response analysis of a wind turbine using a high-order linear aeroelastic model
DEFF Research Database (Denmark)
Sønderby, Ivan Bergquist; Hansen, Morten Hartvig
2014-01-01
generator torque and collective pitch control actions of a modern non-floating wind turbine based on a high-order linear model. The model is a linearization of a geometrically non-linear finite beam element model coupled with an unsteady blade element momentum model of aerodynamic forces including effects......Wind turbine controllers are commonly designed on the basis of low-order linear models to capture the aeroelastic wind turbine response due to control actions and disturbances. This paper characterizes the aeroelastic wind turbine dynamics that influence the open-loop frequency response from......-minimum phase zeros below the frequency of the first drivetrain mode. To correctly predict the non-minimum phase zeros, it is essential to include lateral tower and blade flap degrees of freedom. Copyright © 2013 John Wiley & Sons, Ltd....
International Nuclear Information System (INIS)
Tiwari, Abhinav; Igoshin, Oleg A
2012-01-01
Biochemical regulatory networks governing diverse cellular processes such as stress-response, differentiation and cell cycle often contain coupled feedback loops. We aim at understanding how features of feedback architecture, such as the number of loops, the sign of the loops and the type of their coupling, affect network dynamical performance. Specifically, we investigate how bistability range, maximum open-loop gain and switching times of a network with transcriptional positive feedback are affected by additive or multiplicative coupling with another positive- or negative-feedback loop. We show that a network's bistability range is positively correlated with its maximum open-loop gain and that both quantities depend on the sign of the feedback loops and the type of feedback coupling. Moreover, we find that the addition of positive feedback could decrease the bistability range if we control the basal level in the signal-response curves of the two systems. Furthermore, the addition of negative feedback has the capacity to increase the bistability range if its dissociation constant is much lower than that of the positive feedback. We also find that the addition of a positive feedback to a bistable network increases the robustness of its bistability range, whereas the addition of a negative feedback decreases it. Finally, we show that the switching time for a transition from a high to a low steady state increases with the effective fold change in gene regulation. In summary, we show that the effect of coupled feedback loops on the bistability range and switching times depends on the underlying mechanistic details. (paper)
Considerations of open-loop, closed-loop, and adaptive multicyclic control systems
Chopra, I.; Mccloud, J. L., III
1981-01-01
Four different types of self-tuning regulators were studied for multicyclic control of helicopter vibration. A numerical simulation of the helicopter is made, using a multivariable frequency-domain model, in terms of transfer function with six input control harmonics and six output harmonics. The model characteristics vary with flight speed. An off-line identification of model characteristics is made, using the least-squared-error method and using a succession of input and output measurements. The on-line identification of model characteristics is made using the Kalman filter solution. The optimal controls are calculated from the minimization of quadratic performance function based on response and multicyclic inputs. The performance of various regulators or controllers is judged from the stability, transient response, convergence time, and amplitude of the steady state.
Vaitheesvaran, Bhavapriya; Chueh, Fu-Yu; Xu, Jun; Trujillo, Chuck; Saad, M F; Lee, W N P; McGuinness, Owen P; Kurland, Irwin J
2010-06-01
In vivo insulin sensitivity can be assessed using "open loop" clamp or "closed loop" methods. Open loop clamp methods are static, and fix plasma glucose independently from plasma insulin. Closed loop methods are dynamic, and assess glucose disposal in response to a stable isotope labeled glucose tolerance test. Using PPARalpha(-/-) mice, open and closed loop assessments of insulin sensitivity/glucose disposal were compared. Indirect calorimetry done for the assessment of diurnal substrate utilization/metabolic flexibility showed that chow fed PPARalpha(-/-) mice had increased glucose utilization during the light (starved) cycle. Euglycemic clamps showed no differences in insulin stimulated glucose disposal, whether for chow or high fat diets, but did show differences in basal glucose clearance for chow fed PPARalpha(-/-) versus SV129J-wt mice. In contrast, the dynamic stable isotope labeled glucose tolerance tests reveal enhanced glucose disposal for PPARalpha(-/-) versus SV129J-wt, for chow and high fat diets. Area under the curve for plasma labeled and unlabeled glucose for PPARalpha(-/-) was approximately 1.7-fold lower, P difference on a high fat diet (0.30 +/- 0.1 for SV129J-wt vs. 0.13 +/- 0.10 for PPARalpha(-/-), P = 0.28). This study demonstrates that dynamic stable isotope labeled glucose tolerance test can assess "silent" metabolic phenotypes, not detectable by the static, "open loop", euglycemic or hyperglycemic clamps. Both open loop and closed loop methods may describe different aspects of metabolic inflexibility and insulin sensitivity.
Goldfield, Gary S; Mallory, Risa; Parker, Torrey; Cunningham, Terrell; Legg, Christine; Lumb, Andrew; Parker, Kasey; Prud'homme, Denis; Gaboury, Isabelle; Adamo, Kristi B
2006-07-01
Television viewing and physical inactivity increase the risk of obesity in youth. Thus, identifying new interventions that increase physical activity and reduce television viewing would be helpful in the prevention and treatment of pediatric obesity. This study evaluated the effects of open-loop feedback plus reinforcement versus open-loop feedback alone on physical activity, targeted sedentary behavior, body composition, and energy intake in youth. Thirty overweight or obese 8- to 12-year-old children were randomly assigned to an intervention (n = 14) or control group (n = 16). Participants wore accelerometers every day for 8 weeks and attended biweekly meetings to download the activity monitors. For children in the open-loop feedback plus reinforcement (intervention) group, accumulating 400 counts of physical activity on pedometers earned 1 hour of television/VCR/DVD time, which was controlled by a Token TV electronic device. Open-loop feedback control subjects wore activity monitors but had free access to targeted sedentary behavior. Compared with controls, the open-loop feedback plus reinforcement group demonstrated significantly greater increases in daily physical activity counts (+65% vs +16%) and minutes per day of moderate-to-vigorous physical activity (+9.4 vs +0.3) and greater reductions in minutes per day spent in television viewing (-116.1 vs +14.3). The intervention group also showed more favorable changes in body composition, dietary fat intake, and energy intake from snacks compared with controls. Reductions in sedentary behavior were directly related to reductions in BMI, fat intake, snack intake, and snack intake while watching television. Providing feedback of physical activity in combination with reinforcing physical activity with sedentary behavior is a simple method of modifying the home environment that may play an important role in treating and preventing child obesity.
Two-stage open-loop velocity compensating method applied to multi-mass elastic transmission system
Directory of Open Access Journals (Sweden)
Zhang Deli
2014-02-01
Full Text Available In this paper, a novel vibration-suppression open-loop control method for multi-mass system is proposed, which uses two-stage velocity compensating algorithm and fuzzy I + P controller. This compensating method is based on model-based control theory in order to provide a damping effect on the system mechanical part. The mathematical model of multi-mass system is built and reduced to estimate the velocities of masses. The velocity difference between adjacent masses is calculated dynamically. A 3-mass system is regarded as the composition of two 2-mass systems in order to realize the two-stage compensating algorithm. Instead of using a typical PI controller in the velocity compensating loop, a fuzzy I + P controller is designed and its input variables are decided according to their impact on the system, which is different from the conventional fuzzy PID controller designing rules. Simulations and experimental results show that the proposed velocity compensating method is effective in suppressing vibration on a 3-mass system and it has a better performance when the designed fuzzy I + P controller is utilized in the control system.
Ying, Diqing; Mao, Jianmin; Li, Qiang; Jin, Zhonghe
2016-01-01
A miniaturized compact open-loop resonator fiber optic gyro (RFOG) prototype with main body size of about 10.4 cm×10.4 cm×5.2 cm is reported, and a demodulation signal compensation technique is proposed, aiming to suppress the drift arising from accompanying intensity modulation induced by semiconductor laser diode (LD). The scheme of how to establish this miniaturized RFOG prototype is specifically stated. The linear relationship between the first-harmonic and second-harmonic demodulated signals respectively for the two counter propagating beams in the resonator is verified by theory and experiment, and based on this relationship, the demodulation signal compensation technique by monitoring the second-harmonic demodulated signal is described in detail. With this compensation technique, the gyro output stability under 1°/s rotation rate is effectively improved from 0.12°/s to 0.03°/s, and especially, an about 0.36°/s peak-to-peak fluctuation due to tuning current reset is significantly suppressed. A long term bias stability of about 4.5°/h in 1 h for such a small-sized RFOG prototype is demonstrated, which is of the same magnitude as that of currently reported large-sized RFOG systems utilizing LD as the laser source as well.
A New Open-Loop Fiber Optic Gyro Error Compensation Method Based on Angular Velocity Error Modeling
Directory of Open Access Journals (Sweden)
Yanshun Zhang
2015-02-01
Full Text Available With the open-loop fiber optic gyro (OFOG model, output voltage and angular velocity can effectively compensate OFOG errors. However, the model cannot reflect the characteristics of OFOG errors well when it comes to pretty large dynamic angular velocities. This paper puts forward a modeling scheme with OFOG output voltage and temperature as the input variables and angular velocity error as the output variable. Firstly, the angular velocity error is extracted from OFOG output signals, and then the output voltage , temperature and angular velocity error are used as the learning samples to train a Radial-Basis-Function (RBF neural network model. Then the nonlinear mapping model over T, and is established and thus can be calculated automatically to compensate OFOG errors according to and . The results of the experiments show that the established model can be used to compensate the nonlinear OFOG errors. The maximum, the minimum and the mean square error of OFOG angular velocity are decreased by , and relative to their initial values, respectively. Compared with the direct modeling of gyro angular velocity, which we researched before, the experimental results of the compensating method proposed in this paper are further reduced by , and , respectively, so the performance of this method is better than that of the direct modeling for gyro angular velocity.
A new open-loop fiber optic gyro error compensation method based on angular velocity error modeling.
Zhang, Yanshun; Guo, Yajing; Li, Chunyu; Wang, Yixin; Wang, Zhanqing
2015-02-27
With the open-loop fiber optic gyro (OFOG) model, output voltage and angular velocity can effectively compensate OFOG errors. However, the model cannot reflect the characteristics of OFOG errors well when it comes to pretty large dynamic angular velocities. This paper puts forward a modeling scheme with OFOG output voltage u and temperature T as the input variables and angular velocity error Δω as the output variable. Firstly, the angular velocity error Δω is extracted from OFOG output signals, and then the output voltage u, temperature T and angular velocity error Δω are used as the learning samples to train a Radial-Basis-Function (RBF) neural network model. Then the nonlinear mapping model over T, u and Δω is established and thus Δω can be calculated automatically to compensate OFOG errors according to T and u. The results of the experiments show that the established model can be used to compensate the nonlinear OFOG errors. The maximum, the minimum and the mean square error of OFOG angular velocity are decreased by 97.0%, 97.1% and 96.5% relative to their initial values, respectively. Compared with the direct modeling of gyro angular velocity, which we researched before, the experimental results of the compensating method proposed in this paper are further reduced by 1.6%, 1.4% and 1.42%, respectively, so the performance of this method is better than that of the direct modeling for gyro angular velocity.
International Nuclear Information System (INIS)
Skachek, Sergey; Adamatzky, Andrew; Melhuish, Chris
2005-01-01
A two-dimensional cellular automaton (CA) model of an excitable medium is coupled with an array of micro-actuators in the form of abstract air-jets. Each cell of the CA is linked to a unique air-jet. A cell state determines the orientation and intensity of the airflow generated by the air-jet corresponding to the cell. We explore the phenomenology of an open-loop configuration in which CA cells do not sense the presence of the object being moved. Excitation waves generated in the initial stimulation of the medium, travel on the lattice and cause waves of actuation in the air-jets, resulting in changing airflow patterns. Thus, the waves of actuation move and rotate the manipulated object. We study the manipulation of three convex shapes by excitable CA, and provide the classification of various types of object motion from straight to sinuous and oscillatory trajectories. The relation between the excitation dynamic and resulting trajectories of the object will be used in future designs of hardware prototypes of massive-parallel manipulators controlled by non-linear media
ENERGY AND ENVIRONMENTAL ANALYSIS OF AN OPEN-LOOP GROUND-WATER HEAT PUMP SYSTEM IN AN URBAN AREA
Directory of Open Access Journals (Sweden)
Giorgia Baccino
2010-01-01
Full Text Available In this paper a multidisciplinary methodology for analyzing the opportunities for exploitation of open-loop groundwater heat pump is proposed. The approach starts from a model for calculation of a time profile of thermal requirements (heat and domestic hot water. This curve is then coupled with a model of the control system in order to determine the heat pump operation, which includes its energy performances (primary energy consumption as well as profiles of water discharge to the aquifer in terms of mass flow rate and temperature. Then the thermo-fluid dynamics of the aquifer is performed in order to determine the system impact on the environment as on possible other systems. The application to a case study in the Piedmont region, in Italy, is proposed. Energy analysis of the system shows that ground-water heat pumps constitute an interesting option in areas with small housing density, where there is not district heating. In comparison with typical heating/cooling systems, environmental benefits are related with reduction in global emissions. These benefits may be significantly enhanced using renewables as the primary energy source to produce electricity. The analysis also shows that possible issues related with the extension of the subsurface thermal plume may arise in the case of massive utilization of this technology.
Directory of Open Access Journals (Sweden)
Chia-Mao Chen
2014-01-01
Full Text Available A balun-bandpass filter was proposed by using two folded open-loop ring resonators (OLRRs to couple three microstrip lines. By tuning the size of the OLRR, the operating frequency of the balun-bandpass filter could be tuned to the needed value. By tuning the size of open stub at the end of microstrip lines, the balanced impedance of the balun-bandpass filter could also be tuned. The fabricated balun-bandpass filter had a wide bandwidth and a low insertion loss at center frequency of the passband. The balun-bandpass filter presented an excellent in-band balanced performance with common-mode rejection ratio more than 20 dB in the passbands. An advanced design methodology had been adopted based on EM simulation for making these designed parameters of OLRRs and microstrip lines. Good correlation was seen between simulation and measurement, and the result was that first run pass had been achieved in the majority of our designs.
Dimensioning the EVITA semi-open loop at BR2 for qualification of full size JHR fuel elements
International Nuclear Information System (INIS)
Gouat, Philippe
2011-01-01
Research highlights: → Research reactor fuel (LEU) qualification as part of the licensing process of the JHR reactor. → Thermal-hydraulic dimensioning process of fuel irradiation installation. → We compare the predicted pressure profile in the installation with in situ measured values. - Abstract: The Jules Horowitz Reactor (JHR) is the next generation research reactor from CEA and which commissioning is foreseen in 2014. Prior to acquiring the exploitation license, the fuel elements have to be qualified for their intended functioning power. The only facility capable to perform this task is the Belgian research reactor BR2, due to its similar thermal-hydraulic parameters. At the moment, one has already tested the fuel plates separately. The preparation of the JHR safety report still needs the test of full size elements. This JHR fuel element is broader and more powerful than a standard BR2 fuel element, and one cannot perform an irradiation by simply interchanging them. However, BR2 has 200 mm channels at its disposal, which can be adapted to give the correct hydraulic diameter. One also needs an additional pump to deliver the necessary cooling flow rate for the higher power. This paper describes the dimensioning of the EVITA semi-open loop, which has been built at BR2 to irradiate full size JHR fuel elements and qualify them for the foreseen exploitation parameters. One explains here the followed methodology to quantify the required additional head for the booster pump and to determine the pressure profile along the circuit and the safety margin on the fuel. This methodology relies only on a priori calculations without any measurement on full size installation subpart as usual before the assembly in controlled zone. The article also explains how the original JHR thermal hydraulic safety calculation scheme was adapted to the BR2 environment. One also compares the measurement results on the fully built installation with our previsions. Our models compare well
Realisierung eines verzerrungsarmen Open-Loop Klasse-D Audio-Verstärkers mit SB-ZePoC
Directory of Open Access Journals (Sweden)
O. Schnick
2007-06-01
Full Text Available In den letzten Jahren hat die Entwicklung von Klasse-D Verstärkern für Audio-Anwendungen ein vermehrtes Interesse auf sich gezogen. Eine Motivation hierfür liegt in der mit dieser Technik extrem hohen erzielbaren Effizienz von über 90%. Die Signale, die Klasse-D Verstärker steuern, sind binär. Immer mehr Audio-Signale werden entweder digital gespeichert (CD, DVD, MP3 oder digital übermittelt (Internet, DRM, DAB, DVB-T, DVB-S, GMS, UMTS, weshalb eine direkte Umsetzung dieser Daten in ein binäres Steuersignal ohne vorherige konventionelle D/A-Wandlung erstrebenswert erscheint.
Die klassischen Pulsweitenmodulationsverfahren führen zu Aliasing-Komponenten im Audio-Basisband. Diese Verzerrungen können nur durch eine sehr hohe Schaltfrequenz auf ein akzeptables Maß reduziert werden. Durch das von der Forschungsgruppe um Prof. Mathis vorgestellte SB-ZePoC Verfahren (Zero Position Coding with Separated Baseband wird diese Art der Signalverzerrung durch Generierung eines separierten Basisbands verhindert. Deshalb können auch niedrige Schaltfrequenzen gewählt werden. Dadurch werden nicht nur die Schaltverluste, sondern auch Timing-Verzerrungen verringert, die durch die nichtideale Schaltendstufe verursacht werden. Diese tragen einen großen Anteil zu den gesamten Verzerrungen eines Klasse-D Verstärkers bei. Mit dem SB-ZePoC Verfahren lassen sich verzerrungsarme Open-Loop Klasse-D Audio-Verstärker realisieren, die ohne aufwändige Gegenkopplungsschleifen auskommen.
Class-D amplifiers are suiteble for amplification of audio signals. One argument is their high efficiency of 90% and more. Today most of the audio signals are stored or transmitted in digital form. A digitally controlled Class-D amplifier can be directly driven with coded (modulated data. No separate D/A conversion is needed. Classical modulation schemes like Pulse-Width-Modulation (PWM cause aliasing. So a very high switching rate is required to minimize the
Realisierung eines verzerrungsarmen Open-Loop Klasse-D Audio-Verstärkers mit SB-ZePoC
Schnick, O.; Mathis, W.
2007-06-01
In den letzten Jahren hat die Entwicklung von Klasse-D Verstärkern für Audio-Anwendungen ein vermehrtes Interesse auf sich gezogen. Eine Motivation hierfür liegt in der mit dieser Technik extrem hohen erzielbaren Effizienz von über 90%. Die Signale, die Klasse-D Verstärker steuern, sind binär. Immer mehr Audio-Signale werden entweder digital gespeichert (CD, DVD, MP3) oder digital übermittelt (Internet, DRM, DAB, DVB-T, DVB-S, GMS, UMTS), weshalb eine direkte Umsetzung dieser Daten in ein binäres Steuersignal ohne vorherige konventionelle D/A-Wandlung erstrebenswert erscheint. Die klassischen Pulsweitenmodulationsverfahren führen zu Aliasing-Komponenten im Audio-Basisband. Diese Verzerrungen können nur durch eine sehr hohe Schaltfrequenz auf ein akzeptables Maß reduziert werden. Durch das von der Forschungsgruppe um Prof. Mathis vorgestellte SB-ZePoC Verfahren (Zero Position Coding with Separated Baseband) wird diese Art der Signalverzerrung durch Generierung eines separierten Basisbands verhindert. Deshalb können auch niedrige Schaltfrequenzen gewählt werden. Dadurch werden nicht nur die Schaltverluste, sondern auch Timing-Verzerrungen verringert, die durch die nichtideale Schaltendstufe verursacht werden. Diese tragen einen großen Anteil zu den gesamten Verzerrungen eines Klasse-D Verstärkers bei. Mit dem SB-ZePoC Verfahren lassen sich verzerrungsarme Open-Loop Klasse-D Audio-Verstärker realisieren, die ohne aufwändige Gegenkopplungsschleifen auskommen. Class-D amplifiers are suiteble for amplification of audio signals. One argument is their high efficiency of 90% and more. Today most of the audio signals are stored or transmitted in digital form. A digitally controlled Class-D amplifier can be directly driven with coded (modulated) data. No separate D/A conversion is needed. Classical modulation schemes like Pulse-Width-Modulation (PWM) cause aliasing. So a very high switching rate is required to minimize the aliasing component within the signal
Robust sawtooth period control based on adaptive online optimization
International Nuclear Information System (INIS)
Bolder, J.J.; Witvoet, G.; De Baar, M.R.; Steinbuch, M.; Van de Wouw, N.; Haring, M.A.M.; Westerhof, E.; Doelman, N.J.
2012-01-01
The systematic design of a robust adaptive control strategy for the sawtooth period using electron cyclotron current drive (ECCD) is presented. Recent developments in extremum seeking control (ESC) are employed to derive an optimized controller structure and offer practical tuning guidelines for its parameters. In this technique a cost function in terms of the desired sawtooth period is optimized online by changing the ECCD deposition location based on online estimations of the gradient of the cost function. The controller design does not require a detailed model of the sawtooth instability. Therefore, the proposed ESC is widely applicable to any sawtoothing plasma or plasma simulation and is inherently robust against uncertainties or plasma variations. Moreover, it can handle a broad class of disturbances. This is demonstrated by time-domain simulations, which show successful tracking of time-varying sawtooth period references throughout the whole operating space, even in the presence of variations in plasma parameters, disturbances and slow launcher mirror dynamics. Due to its simplicity and robustness the proposed ESC is a valuable sawtooth control candidate for any experimental tokamak plasma, and may even be applicable to other fusion-related control problems. (paper)
Kazemi, S; Wirostko, W J; Sinha, S; Mieler, W F; Koenig, S B; Sheth, B P
2000-01-01
To review our experience with combined pars plana lensectomy-vitrectomy and open-loop flexible anterior chamber intraocular lens (AC IOL) implantation for managing subluxated crystalline lenses. Retrospective review of 36 consecutive eyes (28 patients), all of which had subluxated crystalline lenses, managed by pars plana lensectomy-vitrectomy with insertion of an open-loop flexible AC IOL. The study was performed at the Medical College of Wisconsin, Milwaukee, over an 8-year period. An average preoperative visual acuity of 20/163 (range, 20/25 to hand motions) improved to 20/36 (range, 20/20 to 4/200) with surgery after a mean follow-up of 14 months (range, 1 to 59 months) (P IOL implantation appears to be an excellent technique for managing subluxated crystalline lenses. It is associated with a significant improvement in visual acuity (P subluxated lens through a limbal wound. Additionally, use of an AC IOL offers a simplified alternative to placement of a ciliary sulcus sutured posterior chamber intraocular lens (PC IOL).
SOLVING ENGINEERING OPTIMIZATION PROBLEMS WITH THE SWARM INTELLIGENCE METHODS
Directory of Open Access Journals (Sweden)
V. Panteleev Andrei
2017-01-01
Full Text Available An important stage in problem solving process for aerospace and aerostructures designing is calculating their main charac- teristics optimization. The results of the four constrained optimization problems related to the design of various technical systems: such as determining the best parameters of welded beams, pressure vessel, gear, spring are presented. The purpose of each task is to minimize the cost and weight of the construction. The object functions in optimization practical problem are nonlinear functions with a lot of variables and a complex layer surface indentations. That is why using classical approach for extremum seeking is not efficient. Here comes the necessity of using such methods of optimization that allow to find a near optimal solution in acceptable amount of time with the minimum waste of computer power. Such methods include the methods of Swarm Intelligence: spiral dy- namics algorithm, stochastic diffusion search, hybrid seeker optimization algorithm. The Swarm Intelligence methods are designed in such a way that a swarm consisting of agents carries out the search for extremum. In search for the point of extremum, the parti- cles exchange information and consider their experience as well as the experience of population leader and the neighbors in some area. To solve the listed problems there has been designed a program complex, which efficiency is illustrated by the solutions of four applied problems. Each of the considered applied optimization problems is solved with all the three chosen methods. The ob- tained numerical results can be compared with the ones found in a swarm with a particle method. The author gives recommenda- tions on how to choose methods parameters and penalty function value, which consider inequality constraints.
Liu, Yu; Li, Min; Yang, Dong; Zhang, Xuena; Wu, Anshi; Yao, Shanglong; Xue, Zhanggang; Yue, Yun
2015-01-01
The CONCERT-CL closed-loop infusion system designed by VERYARK Technology Co., Ltd. (Guangxi, China) is an innovation using TCI combined with closed-loop controlled intravenous anesthesia under the guide of BIS. In this study we performed a randomized, controlled, multicenter study to compare closed-loop control and open-loop control of propofol by using the CONCERT-CL closed-loop infusion system. 180 surgical patients from three medical centers undergone TCI intravenous anesthesia with propofol and remifentanil were randomly assigned to propofol closed-loop group and propofol opened-loop groups. Primary outcome was global score (GS, GS = (MDAPE+Wobble)/% of time of bispectral index (BIS) 40-60). Secondary outcomes were doses of the anesthetics and emergence time from anesthesia, such as, time to tracheal extubation. There were 89 and 86 patients in the closed-loop and opened-loop groups, respectively. GS in the closed-loop groups (22.21±8.50) were lower than that in the opened-loop group (27.19±15.26) (p=0.009). The higher proportion of time of BIS between 40 and 60 was also observed in the closed-loop group (84.11±9.50%), while that was 79.92±13.17% in the opened-loop group, (p=0.016). No significant differences in propofol dose and time of tracheal extubation were observed. The frequency of propofol regulation in the closed-loop group (31.55±9.46 times/hr) was obverse higher than that in the opened-loop group (6.84±6.21 times/hr) (p=0.000). The CONCERT-CL closed-loop infusion system can automatically regulate the TCI of propofol, maintain the BIS value in an adequate range and reduce the workload of anesthesiologists better than open-loop system. ChiCTR ChiCTR-OOR-14005551.
Directory of Open Access Journals (Sweden)
Fernando Perez-Peña
2013-11-01
Full Text Available In this paper we present a complete spike-based architecture: from a Dynamic Vision Sensor (retina to a stereo head robotic platform. The aim of this research is to reproduce intended movements performed by humans taking into account as many features as possible from the biological point of view. This paper fills the gap between current spike silicon sensors and robotic actuators by applying a spike processing strategy to the data flows in real time. The architecture is divided into layers: the retina, visual information processing, the trajectory generator layer which uses a neuroinspired algorithm (SVITE that can be replicated into as many times as DoF the robot has; and finally the actuation layer to supply the spikes to the robot (using PFM. All the layers do their tasks in a spike-processing mode, and they communicate each other through the neuro-inspired AER protocol. The open-loop controller is implemented on FPGA using AER interfaces developed by RTC Lab. Experimental results reveal the viability of this spike-based controller. Two main advantages are: low hardware resources (2% of a Xilinx Spartan 6 and power requirements (3.4 W to control a robot with a high number of DoF (up to 100 for a Xilinx Spartan 6. It also evidences the suitable use of AER as a communication protocol between processing and actuation.
Optimal policies for identification of stochastic linear systems
Lopez-Toledo, A. A.; Athans, M.
1975-01-01
The problem of designing closed-loop policies for identification of multiinput-multioutput linear discrete-time systems with random time-varying parameters is considered in this paper using a Bayesian approach. A sensitivity index gives a measure of performance for the closed-loop laws. The computation of the optimal laws is shown to be nontrivial, an exercise in stochastic control, but open-loop, affine, and open-loop feedback optimal inputs are shown to yield tractable problems. Numerical examples are given. For time-invariant systems, the criterion considered is shown to be related to the trace of the information matrix associated with the system.
A mean–variance objective for robust production optimization in uncertain geological scenarios
DEFF Research Database (Denmark)
Capolei, Andrea; Suwartadi, Eka; Foss, Bjarne
2014-01-01
In this paper, we introduce a mean–variance criterion for production optimization of oil reservoirs and suggest the Sharpe ratio as a systematic procedure to optimally trade-off risk and return. We demonstrate by open-loop simulations of a two-phase synthetic oil field that the mean–variance crit......In this paper, we introduce a mean–variance criterion for production optimization of oil reservoirs and suggest the Sharpe ratio as a systematic procedure to optimally trade-off risk and return. We demonstrate by open-loop simulations of a two-phase synthetic oil field that the mean...
Chen, Quan; Li, Yaoyu; Seem, John E
2015-09-01
This paper presents a self-optimizing robust control scheme that can maximize the power generation for a variable speed wind turbine with Doubly-Fed Induction Generator (DFIG) operated in Region 2. A dual-loop control structure is proposed to synergize the conversion from aerodynamic power to rotor power and the conversion from rotor power to the electrical power. The outer loop is an Extremum Seeking Control (ESC) based generator torque regulation via the electric power feedback. The ESC can search for the optimal generator torque constant to maximize the rotor power without wind measurement or accurate knowledge of power map. The inner loop is a vector-control based scheme that can both regulate the generator torque requested by the ESC and also maximize the conversion from the rotor power to grid power. An ℋ(∞) controller is synthesized for maximizing, with performance specifications defined based upon the spectrum of the rotor power obtained by the ESC. Also, the controller is designed to be robust against the variations of some generator parameters. The proposed control strategy is validated via simulation study based on the synergy of several software packages including the TurbSim and FAST developed by NREL, Simulink and SimPowerSystems. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.
Sarri, Margarita; Greenwood, Richard; Kalra, Lalit; Papps, Ben; Husain, Masud; Driver, Jon
2008-01-01
Prism adaptation to rightward optical shifts during visually guided pointing is considered a promising intervention in right-hemisphere stroke patients with left spatial neglect. Conventionally, prism adaptation is assessed via aftereffects, on subjective straight ahead (SSA) pointing with eyes closed; or by visual open-loop pointing (VOL), i.e. pointing to a visual target without seeing the hand. Previous data suggest indirectly that prism aftereffects in neglect patients may be larger (pathologically so) when assessed by SSA than by VOL. But these measures have never been directly compared within the same patients after identical prism exposure. Accordingly we implemented both measures here within the same group of 13 neglect patients and 13 controls. Prism aftereffects were much larger for SSA than VOL in neglect patients, falling outside the normative range only for SSA. This may arise because the SSA task can itself involve aspects of neglect that may be ameliorated by the prism intervention, hence showing abnormal changes after prisms. The extent of SSA change after prisms varied between patients, and correlated with improvements on a standard cancellation measure for neglect. The lesions of patients who did versus did not show neglect improvement immediately after prisms provide an initial indication that lack of improvement may potentially relate to cortical damage in right intraparietal sulcus and white matter damage in inferior parietal lobe and middle frontal gyrus. Future studies of possible rehabilitative impact from prisms upon neglect may need to consider carefully how to measure prism adaptation per se, separately from any impact of such adaptation upon manifestations of neglect. PMID:18083203
BICO MPPT: A Faster Maximum Power Point Tracker and Its Application for Photovoltaic Panels
Malek, Hadi; Chen, YangQuan
2014-01-01
This paper develops a maximum power point tracking (MPPT) algorithm to optimize photovoltaic (PV) array performance and make it more compatible to rapidly varying weather conditions. In particular, a novel extremum seeking controller (ESC), which uses a Bode ideal cutoff (BICO) filter in its structure, is designed and tested on a simulated PV array. The new algorithm is compared against the commonly used ESC MPPT algorithm with first-order filters. The BICO extremum seeking controlle...
An optimal control framework for estimating autopilot safety margins
Govindarjan, N.; De Visser, C.C.; Van Kampen, E.; Krishnakumar, K.; Barlow, J.; Stepanyan, V.
2014-01-01
This paper presents an optimal control framework to determine a collection of open-loop command signals that mathematically guarantees operation of an aircraft within certain prescribed state constraints. The framework is specifically applied to estimate margins for the reference command inputs of
Waterflooding optimization in uncertain geological scenarios
DEFF Research Database (Denmark)
Capolei, Andrea; Suwartadi, Eka; Foss, Bjarne
2013-01-01
, robust optimization has been suggested to improve and robustify optimal control strategies. In robust optimization of an oil reservoir, the water injection and production borehole pressures (bhp) are computed such that the predicted net present value (NPV) of an ensemble of permeability field...... of the permeability field from the production data. For open-loop implementations, previous test case studies presented in the literature, show that a traditional robust optimization strategy (RO) gives a higher expected NPV with lower NPV standard deviation than a conventional reactive strategy. We present and study...
Gottardi, L.; Bruijn, M.; Gao, J.R.; Den Hartog, R.; Hijmering, R.; Hoevers, H.; Khosropanah, P.; De Korte, P.; Van der Kuur, J.; Lindeman, M.; Ridder, M.
2012-01-01
SRON is developing the Frequency Domain Multiplexing (FDM) read-out and the ultra low NEP TES bolometers array for the infra-red spectrometer SAFARI on board of the Japanese space mission SPICA. The FDM prototype of the instrument requires critical and complex optimizations. For single pixel
Stochastic optimal control of single neuron spike trains
DEFF Research Database (Denmark)
Iolov, Alexandre; Ditlevsen, Susanne; Longtin, Andrë
2014-01-01
stimulation of a neuron to achieve a target spike train under the physiological constraint to not damage tissue. Approach. We pose a stochastic optimal control problem to precisely specify the spike times in a leaky integrate-and-fire (LIF) model of a neuron with noise assumed to be of intrinsic or synaptic...... to the spike times (open-loop control). Main results. We have developed a stochastic optimal control algorithm to obtain precise spike times. It is applicable in both the supra-threshold and sub-threshold regimes, under open-loop and closed-loop conditions and with an arbitrary noise intensity; the accuracy...... into account physiological constraints on the control. A precise and robust targeting of neural activity based on stochastic optimal control has great potential for regulating neural activity in e.g. prosthetic applications and to improve our understanding of the basic mechanisms by which neuronal firing...
Pearce, Charles
2009-01-01
Focuses on mathematical structure, and on real-world applications. This book includes developments in several optimization-related topics such as decision theory, linear programming, turnpike theory, duality theory, convex analysis, and queuing theory.
Energy Technology Data Exchange (ETDEWEB)
Garcia Lopez, Manuel
2001-10-15
This work describes the design and implementation of an open loop speed controller for an induction motor. This controller is based on a DSP TMS320F240 chip from Texas Instruments. Speed control is achieved by maintaining the magnetic flux constant through the regularization of stator voltage/frequency relationship. Voltage and frequency variation are achieved using the strategy of pulse width modulation with space vectors. Hardware design is presented (current source and the printed circuit for the intelligent power module) and the software (control algorithms and the modulation strategy using space vectors). The algorithms given were implement using the TMS320F240 language. [Spanish] Este trabajo describe el diseno y la implementacion de un control de la velocidad en lazo abierto de un motor de induccion, basado en el DSP TMS320F240 de Texas Instruments. El control de la velocidad se logra manteniendo el flujo en el entre hierro constante, lo cual es realizado al regular el valor de la relacion voltaje/frecuencia en el estator. La variacion del voltaje y la frecuencia se realiza utilizando la estrategia de modulacion del ancho de los pulsos con vectores espaciales. Se presenta el diseno de los circuitos (fuente de corriente continua y circuito impreso para el modulo inteligente de potencia) y de los programas (algoritmos de control y de la estrategia de modulacion con vectores espaciales) necesarios que se utilizaron durante la implementacion del accionamiento del motor. Los algoritmos dados fueron implementados en el lenguaje ensamblador del TMS320F240.
The Inverse Optimal Control Problem for a Three-Loop Missile Autopilot
Hwang, Donghyeok; Tahk, Min-Jea
2018-04-01
The performance characteristics of the autopilot must have a fast response to intercept a maneuvering target and reasonable robustness for system stability under the effect of un-modeled dynamics and noise. By the conventional approach, the three-loop autopilot design is handled by time constant, damping factor and open-loop crossover frequency to achieve the desired performance requirements. Note that the general optimal theory can be also used to obtain the same gain as obtained from the conventional approach. The key idea of using optimal control technique for feedback gain design revolves around appropriate selection and interpretation of the performance index for which the control is optimal. This paper derives an explicit expression, which relates the weight parameters appearing in the quadratic performance index to the design parameters such as open-loop crossover frequency, phase margin, damping factor, or time constant, etc. Since all set of selection of design parameters do not guarantee existence of optimal control law, explicit inequalities, which are named the optimality criteria for the three-loop autopilot (OC3L), are derived to find out all set of design parameters for which the control law is optimal. Finally, based on OC3L, an efficient gain selection procedure is developed, where time constant is set to design objective and open-loop crossover frequency and phase margin as design constraints. The effectiveness of the proposed technique is illustrated through numerical simulations.
Open-loop digital frequency multiplier
Moore, R. C.
1977-01-01
Monostable multivibrator is implemented by using digital integrated circuits where multiplier constant is too large for conventional phase-locked-loop integrated circuit. A 400 Hz clock is generated by divide-by-N counter from 1 Hz timing reference.
Tiny Open-Loop Atmospheric Sensing Technique
National Aeronautics and Space Administration — We will design and fabricate a circuit card capable of retrieving real-time ionospheric and atmospheric refractivity from a low Earth orbit platform. The design must...
VT Geothermal Open Loop Systems - well points
Vermont Center for Geographic Information — (Link to Metadata) The Renewable Energy Atlas of Vermont and this dataset were created to assist town energy committees, the Clean Energy Development Fund and other...
Jacob, H. G.
1972-01-01
An optimization method has been developed that computes the optimal open loop inputs for a dynamical system by observing only its output. The method reduces to static optimization by expressing the inputs as series of functions with parameters to be optimized. Since the method is not concerned with the details of the dynamical system to be optimized, it works for both linear and nonlinear systems. The method and the application to optimizing longitudinal landing paths for a STOL aircraft with an augmented wing are discussed. Noise, fuel, time, and path deviation minimizations are considered with and without angle of attack, acceleration excursion, flight path, endpoint, and other constraints.
Optimization of an Aeroservoelastic Wing with Distributed Multiple Control Surfaces
Stanford, Bret K.
2015-01-01
This paper considers the aeroelastic optimization of a subsonic transport wingbox under a variety of static and dynamic aeroelastic constraints. Three types of design variables are utilized: structural variables (skin thickness, stiffener details), the quasi-steady deflection scheduling of a series of control surfaces distributed along the trailing edge for maneuver load alleviation and trim attainment, and the design details of an LQR controller, which commands oscillatory hinge moments into those same control surfaces. Optimization problems are solved where a closed loop flutter constraint is forced to satisfy the required flight margin, and mass reduction benefits are realized by relaxing the open loop flutter requirements.
Karam, Ayman M.
2016-12-01
Membrane Distillation (MD) is an emerging sustainable desalination technique. While MD has many advantages and can be powered by solar thermal energy, its main drawback is the low water production rate. However, the MD process has not been fully optimized in terms of its manipulated and controlled variables. This is largely due to the lack of adequate dynamic models to study and simulate the process. In addition, MD is prone to membrane fouling, which is a fault that degrades the performance of the MD process. This work has three contributions to address these challenges. First, we derive a mathematical model of Direct Contact Membrane Distillation (DCMD), which is the building block for the next parts. Then, the proposed model is extended to account for membrane fouling and an observer-based fouling detection method is developed. Finally, various control strategies are implemented to optimize the performance of the DCMD solar-powered process. In part one, a reduced-order dynamic model of DCMD is developed based on lumped capacitance method and electrical analogy to thermal systems. The result is an electrical equivalent thermal network to the DCMD process, which is modeled by a system of nonlinear differential algebraic equations (DAEs). This model predicts the water-vapor flux and the temperature distribution along the module length. Experimental data is collected to validate the steady-state and dynamic responses of the proposed model, with great agreement demonstrated in both. The second part proposes an extension of the model to account for membrane fouling. An adaptive observer for DAE systems is developed and convergence proof is presented. A method for membrane fouling detection is then proposed based on adaptive observers. Simulation results demonstrate the performance of the membrane fouling detection method. Finally, an optimization problem is formulated to maximize the process efficiency of a solar-powered DCMD. The adapted method is known as Extremum
Power Control and Optimization of Photovoltaic and Wind Energy Conversion Systems
Ghaffari, Azad
Power map and Maximum Power Point (MPP) of Photovoltaic (PV) and Wind Energy Conversion Systems (WECS) highly depend on system dynamics and environmental parameters, e.g., solar irradiance, temperature, and wind speed. Power optimization algorithms for PV systems and WECS are collectively known as Maximum Power Point Tracking (MPPT) algorithm. Gradient-based Extremum Seeking (ES), as a non-model-based MPPT algorithm, governs the system to its peak point on the steepest descent curve regardless of changes of the system dynamics and variations of the environmental parameters. Since the power map shape defines the gradient vector, then a close estimate of the power map shape is needed to create user assignable transients in the MPPT algorithm. The Hessian gives a precise estimate of the power map in a neighborhood around the MPP. The estimate of the inverse of the Hessian in combination with the estimate of the gradient vector are the key parts to implement the Newton-based ES algorithm. Hence, we generate an estimate of the Hessian using our proposed perturbation matrix. Also, we introduce a dynamic estimator to calculate the inverse of the Hessian which is an essential part of our algorithm. We present various simulations and experiments on the micro-converter PV systems to verify the validity of our proposed algorithm. The ES scheme can also be used in combination with other control algorithms to achieve desired closed-loop performance. The WECS dynamics is slow which causes even slower response time for the MPPT based on the ES. Hence, we present a control scheme, extended from Field-Oriented Control (FOC), in combination with feedback linearization to reduce the convergence time of the closed-loop system. Furthermore, the nonlinear control prevents magnetic saturation of the stator of the Induction Generator (IG). The proposed control algorithm in combination with the ES guarantees the closed-loop system robustness with respect to high level parameter uncertainty
Closed Loop Optimal Control of a Stewart Platform Using an Optimal Feedback Linearization Method
Directory of Open Access Journals (Sweden)
Hami Tourajizadeh
2016-06-01
Full Text Available Optimal control of a Stewart robot is performed in this paper using a sequential optimal feedback linearization method considering the jack dynamics. One of the most important applications of a Stewart platform is tracking a machine along a specific path or from a defined point to another point. However, the control procedure of these robots is more challenging than that of serial robots since their dynamics are extremely complicated and non-linear. In addition, saving energy, together with achieving the desired accuracy, is one of the most desirable objectives. In this paper, a proper non-linear optimal control is employed to gain the maximum accuracy by applying the minimum force distribution to the jacks. Dynamics of the jacks are included in this paper to achieve more accurate results. Optimal control is performed for a six-DOF hexapod robot and its accuracy is increased using a sequential feedback linearization method, while its energy optimization is realized using the LQR method for the linearized system. The efficiency of the proposed optimal control is verified by simulating a six-DOF hexapod robot in MATLAB, and its related results are gained and analysed. The actual position of the end-effector, its velocity, the initial and final forces of the jacks and the length and velocity of the jacks are obtained and then compared with open loop and non-optimized systems; analytical comparisons show the efficiency of the proposed methods.
International Nuclear Information System (INIS)
Apparigliato, R.
2008-06-01
In this Phd, we focus on the problem of weekly risk management in electric production. In the first part of this work, we investigate how to take into account stochastic inflows in the optimal management of a hydraulic valley. Our model is based on robust optimization and linear decision rules. A validation procedure based on simulation over random scenarios shows that we are able to postpone constraints violations of volume at very low cost. The second part deals with the problem of active management of electrical power margin, defined as the difference between the total offer and the total demand, considering the different random parameters which affect the electrical system. The objective is to determine optimal solutions to be taken in order to satisfy the demand in 99% of the cases. In that purpose, we propose a new open-looped formulation, based on the stochastic process of power margin and on the use of probabilistic constraints. To be able to solve this problem, we generate power margin's scenarios using more realistic methods than those used in exploitation. At last, a closed-loop approach, based on the heuristic 'Stochastic Programming with Step Decision Rules', introduced by Thenie and Vial, is studied. First results are quite promising in comparison with the opened-loop ones. (author)
Robust fault detection in open loop vs. closed loop
DEFF Research Database (Denmark)
Niemann, Hans Henrik; Stoustrup, J.
1997-01-01
The robustness aspects of fault detection and isolation (FDI) for uncertain systems are considered. The FDI problem is considered in a standard problem formulation. The FDI design problem is analyzed both in the case where the control input signal is considered as a known external input signal (o...
A Nonlinear Physics-Based Optimal Control Method for Magnetostrictive Actuators
Smith, Ralph C.
1998-01-01
This paper addresses the development of a nonlinear optimal control methodology for magnetostrictive actuators. At moderate to high drive levels, the output from these actuators is highly nonlinear and contains significant magnetic and magnetomechanical hysteresis. These dynamics must be accommodated by models and control laws to utilize the full capabilities of the actuators. A characterization based upon ferromagnetic mean field theory provides a model which accurately quantifies both transient and steady state actuator dynamics under a variety of operating conditions. The control method consists of a linear perturbation feedback law used in combination with an optimal open loop nonlinear control. The nonlinear control incorporates the hysteresis and nonlinearities inherent to the transducer and can be computed offline. The feedback control is constructed through linearization of the perturbed system about the optimal system and is efficient for online implementation. As demonstrated through numerical examples, the combined hybrid control is robust and can be readily implemented in linear PDE-based structural models.
Optimal shape control of functionally graded smart plates using genetic algorithms
Liew, K. M.; He, X. Q.; Meguid, S. A.
This paper deals with optimal shape control of functionally graded smart plate containing patches of piezoelectric sensors and actuators. The genetic algorithm (GA) is designed to search for optimal actuator voltage and displacement control gains for the shape control of the functionally graded material (FGM) plates. The work extends the earlier finite element formulations of the two leading authors, so that it can be readily treated using genetic algorithms. Numerical results have been obtained to study the effect of the shape control of the FGM plates under a temperature gradient by optimising (i) the voltage distribution for the open loop control, and (ii) the displacement control gain values for the closed loop feedback control. The effect of the constituent volume fractions of zirconia, through varying the volume fraction exponent n, on the optimal voltages and gain values has also been examined.
Economic Optimization of Spray Dryer Operation using Nonlinear Model Predictive Control
DEFF Research Database (Denmark)
Petersen, Lars Norbert; Poulsen, Niels Kjølstad; Niemann, Hans Henrik
2014-01-01
In this paper we investigate an economically optimizing Nonlinear Model Predictive Control (E-NMPC) for a spray drying process. By simulation we evaluate the economic potential of this E-NMPC compared to a conventional PID based control strategy. Spray drying is the preferred process to reduce...... the water content for many liquid foodstuffs and produces a free flowing powder. The main challenge in controlling the spray drying process is to meet the residual moisture specifications and avoid that the powder sticks to the chamber walls of the spray dryer. We present a model for a spray dryer that has...... been validated on experimental data from a pilot plant. We use this model for simulation as well as for prediction in the E-NMPC. The E-NMPC is designed with hard input constraints and soft output constraints. The open-loop optimal control problem in the E-NMPC is solved using the single...
DEFF Research Database (Denmark)
Petersen, Lars Norbert; Jørgensen, John Bagterp; Rawlings, James B.
2015-01-01
In this paper, we develop an economically optimizing Nonlinear Model Predictive Controller (E-NMPC) for a complete spray drying plant with multiple stages. In the E-NMPC the initial state is estimated by an extended Kalman Filter (EKF) with noise covariances estimated by an autocovariance least...... squares method (ALS). We present a model for the spray drying plant and use this model for simulation as well as for prediction in the E-NMPC. The open-loop optimal control problem in the E-NMPC is solved using the single-shooting method combined with a quasi-Newton Sequential Quadratic programming (SQP......) algorithm and the adjoint method for computation of gradients. We evaluate the economic performance when unmeasured disturbances are present. By simulation, we demonstrate that the E-NMPC improves the profit of spray drying by 17% compared to conventional PI control....
Quantum gates with optimal bandwidth in noisy environments
Low, Guang Hao; Theodore, Yoder; Chuang, Isaac
The traditional approach of open-loop quantum error correction suppresses certain systematic imperfections ɛ in quantum control to higher orders ɛ (L) by a well-designed sequence of L imperfect quantum gates. However, this philosophy of maximal flatness leads to an ɛ-bandwidth that scales poorly with length and a residual that is easily overwhelmed by unaccounted sources of noise. We advance the paradigm of equiripple compensated gates that directly optimize for bandwidth given the limitations imposed by noise of magnitude δ, leading to dramatically improved performance. Where ɛ represent amplitude errors, we provide a formalism that generalizes both approaches and is effective at finding such gates. With it, we provide in closed-form the phase angles for an optimal family of population inversion gates with an ɛ -bandwidth of (logδ-1/L) - a quadratic improvement over optimal maximally flat variants. We also construct optimal NOT gates and discuss extensions to other gates and error models.
Energy Technology Data Exchange (ETDEWEB)
Apparigliato, R
2008-06-15
In this Phd, we focus on the problem of weekly risk management in electric production. In the first part of this work, we investigate how to take into account stochastic inflows in the optimal management of a hydraulic valley. Our model is based on robust optimization and linear decision rules. A validation procedure based on simulation over random scenarios shows that we are able to postpone constraints violations of volume at very low cost. The second part deals with the problem of active management of electrical power margin, defined as the difference between the total offer and the total demand, considering the different random parameters which affect the electrical system. The objective is to determine optimal solutions to be taken in order to satisfy the demand in 99% of the cases. In that purpose, we propose a new open-looped formulation, based on the stochastic process of power margin and on the use of probabilistic constraints. To be able to solve this problem, we generate power margin's scenarios using more realistic methods than those used in exploitation. At last, a closed-loop approach, based on the heuristic 'Stochastic Programming with Step Decision Rules', introduced by Thenie and Vial, is studied. First results are quite promising in comparison with the opened-loop ones. (author)
Parametric Optimization of Ares I Propellant Slosh Characteristics Using Frequency Response Criteria
Orr, Jeb S.; Hall, Charles E.
2009-01-01
A novel technique for developing propellant slosh damping requirements with respect to the stability characteristics of large flexible launch vehicles is presented. A numerical algorithm is devised which allows an automated software program to rapidly converge to pseudo-optimal solutions that minimize required propellant slosh damping for multiple tanks while maintaining constraints on the frequency response characteristics of a particular open-loop plant transfer function. An implementation of the algorithm using a high-order linear model of the Ares I plant dynamics considers all relevant dynamic interactions of flexible body modes, propellant slosh, and nozzle inertia effects. A high-resolution propellant damping requirements table is produced that can be used for baffle design. The method is demonstrated to provide exceptional speed and accuracy when compared with the alternative human-in-the-loop approach.
Optimization and Optimal Control
Chinchuluun, Altannar; Enkhbat, Rentsen; Tseveendorj, Ider
2010-01-01
During the last four decades there has been a remarkable development in optimization and optimal control. Due to its wide variety of applications, many scientists and researchers have paid attention to fields of optimization and optimal control. A huge number of new theoretical, algorithmic, and computational results have been observed in the last few years. This book gives the latest advances, and due to the rapid development of these fields, there are no other recent publications on the same topics. Key features: Provides a collection of selected contributions giving a state-of-the-art accou
Faruque, Imraan A; Muijres, Florian T; Macfarlane, Kenneth M; Kehlenbeck, Andrew; Humbert, J Sean
2018-01-03
This paper presents "optimal identification," a framework for using experimental data to identify the optimality conditions associated with the feedback control law implemented in the measurements. The technique compares closed loop trajectory measurements against a reduced order model of the open loop dynamics, and uses linear matrix inequalities to solve an inverse optimal control problem as a convex optimization that estimates the controller optimality conditions. In this study, the optimal identification technique is applied to two examples, that of a millimeter-scale micro-quadrotor with an engineered controller on board, and the example of a population of freely flying Drosophila hydei maneuvering about forward flight. The micro-quadrotor results show that the performance indices used to design an optimal flight control law for a micro-quadrotor may be recovered from the closed loop simulated flight trajectories, and the Drosophila results indicate that the combined effect of the insect longitudinal flight control sensing and feedback acts principally to regulate pitch rate.
Autonomous Optimization of Targeted Stimulation of Neuronal Networks.
Kumar, Sreedhar S; Wülfing, Jan; Okujeni, Samora; Boedecker, Joschka; Riedmiller, Martin; Egert, Ulrich
2016-08-01
Driven by clinical needs and progress in neurotechnology, targeted interaction with neuronal networks is of increasing importance. Yet, the dynamics of interaction between intrinsic ongoing activity in neuronal networks and their response to stimulation is unknown. Nonetheless, electrical stimulation of the brain is increasingly explored as a therapeutic strategy and as a means to artificially inject information into neural circuits. Strategies using regular or event-triggered fixed stimuli discount the influence of ongoing neuronal activity on the stimulation outcome and are therefore not optimal to induce specific responses reliably. Yet, without suitable mechanistic models, it is hardly possible to optimize such interactions, in particular when desired response features are network-dependent and are initially unknown. In this proof-of-principle study, we present an experimental paradigm using reinforcement-learning (RL) to optimize stimulus settings autonomously and evaluate the learned control strategy using phenomenological models. We asked how to (1) capture the interaction of ongoing network activity, electrical stimulation and evoked responses in a quantifiable 'state' to formulate a well-posed control problem, (2) find the optimal state for stimulation, and (3) evaluate the quality of the solution found. Electrical stimulation of generic neuronal networks grown from rat cortical tissue in vitro evoked bursts of action potentials (responses). We show that the dynamic interplay of their magnitudes and the probability to be intercepted by spontaneous events defines a trade-off scenario with a network-specific unique optimal latency maximizing stimulus efficacy. An RL controller was set to find this optimum autonomously. Across networks, stimulation efficacy increased in 90% of the sessions after learning and learned latencies strongly agreed with those predicted from open-loop experiments. Our results show that autonomous techniques can exploit quantitative
Optimal control of batch emulsion polymerization of vinyl chloride
Energy Technology Data Exchange (ETDEWEB)
Damslora, Andre Johan
1998-12-31
The highly exothermic polymerization of vinyl chloride (VC) is carried out in large vessels where the heat removal represents a major limitation of the production rate. Many emulsion polymerization reactors are operated in such a way that a substantial part of the heat transfer capacity is left unused for a significant part of the total batch time. To increase the reaction rate so that it matches the heat removal capacity during the course of the reaction, this thesis proposes the use of a sufficiently flexible initiator system to obtain a reaction rate which is high throughout the reaction and real-time optimization to compute the addition policy for the initiator. This optimization based approach provides a basis for an interplay between design and control and between production and research. A simple model is developed for predicting the polymerization rate. The model is highly nonlinear and open-loop unstable and may serve as an interesting case for comparison of nonlinear control strategies. The model is fitted to data obtained in a laboratory scale reactor. Finally, the thesis discusses optimal control of the emulsion polymerization reactor. Reduction of the batch cycle time is of major economic importance, as long as the quality parameters are within their specifications. The control parameterization had a major influence on the performance. A differentiable spline parameterization was applied and the optimization is illustrated in a number of cases. The best performance is obtained when the reactor temperature is obtained when the optimization is combined with some form of closed-loop control of the reactor temperature. 112 refs., 48 figs., 4 tabs.
Path Planning of Mobile Elastic Robotic Arms by Indirect Approach of Optimal Control
Directory of Open Access Journals (Sweden)
Moharam Habibnejad Korayem
2011-03-01
Full Text Available Finding optimal trajectory is critical in several applications of robot manipulators. This paper is applied the open-loop optimal control approach for generating the optimal trajectory of the flexible mobile manipulators in point-to-point motion. This method is based on the Pontryagin-s minimum principle that by providing a two-point boundary value problem is solved the problem. This problem is known to be complex in particular when combined motion of the base and manipulator, non-holonomic constraint of the base and highly non-linear and complicated dynamic equations as a result of flexible nature of links are taken into account. The study emphasizes on modeling of the complete optimal control problem by remaining all nonlinear state and costate variables as well as control constraints. In this method, designer can compromise between different objectives by considering the proper penalty matrices and it yields to choose the proper trajectory among the various paths. The effectiveness and capability of the proposed approach are demonstrated through simulation studies. Finally, to verify the proposed method, the simulation results obtained from the model are compared with the results of those available in the literature.
Path Planning of Mobile Elastic Robotic Arms by Indirect Approach of Optimal Control
Directory of Open Access Journals (Sweden)
Moharam Habibnejad Korayem
2011-03-01
Full Text Available Finding optimal trajectory is critical in several applications of robot manipulators. This paper is applied the open-loop optimal control approach for generating the optimal trajectory of the flexible mobile manipulators in point-to-point motion. This method is based on the Pontryagin's minimum principle that by providing a two-point boundary value problem is solved the problem. This problem is known to be complex in particular when combined motion of the base and manipulator, nonholonomic constraint of the base and highly non-linear and complicated dynamic equations as a result of flexible nature of links are taken into account. The study emphasizes on modeling of the complete optimal control problem by remaining all nonlinear state and costate variables as well as control constraints. In this method, designer can compromise between different objectives by considering the proper penalty matrices and it yields to choose the proper trajectory among the various paths. The effectiveness and capability of the proposed approach are demonstrated through simulation studies. Finally, to verify the proposed method, the simulation results obtained from the model are compared with the results of those available in the literature.
Optimal pole shifting controller for interconnected power system
International Nuclear Information System (INIS)
Yousef, Ali M.; Kassem, Ahmed M.
2011-01-01
Research highlights: → Mathematical model represents a power system which consists of synchronous machine connected to infinite bus through transmission line. → Power system stabilizer was designed based on optimal pole shifting controller. → The system performances was tested through load disturbances at different operating conditions. → The system performance with the proposed optimal pole shifting controller is compared with the conventional pole placement controller. → The digital simulation results indicated that the proposed controller has a superior performance. -- Abstract: Power system stabilizer based on optimal pole shifting is proposed. An approach for shifting the real parts of the open-loop poles to any desired positions while preserving the imaginary parts is presented. In each step of this approach, it is required to solve a first-order or a second-order linear matrix Lyapunov equation for shifting one real pole or two complex conjugate poles, respectively. This presented method yields a solution, which is optimal with respect to a quadratic performance index. The attractive feature of this method is that it enables solutions of the complex problem to be easily found without solving any non-linear algebraic Riccati equation. The present power system stabilizer is based on Riccati equation approach. The control law depends on finding the feedback gain matrix, and then the control signal is synthesized by multiplying the state variables of the power system with determined gain matrix. The gain matrix is calculated one time only, and it works over wide range of operating conditions. To validate the power of the proposed PSS, a linearized model of a simple power system consisted of a single synchronous machine connected to infinite bus bar through transmission line is simulated. The studied power system is subjected to various operating points and power system parameters changes.
Optimization Controller for Mechatronic Sun Tracking System to Improve Performance
Directory of Open Access Journals (Sweden)
Mustafa Engin
2013-01-01
Full Text Available An embedded system that contains hardware and software was developed for two-axis solar tracking system to improve photovoltaic panel utilization. The hardware section of the embedded system consists of a 32-bit ARM core microcontroller, motor driver circuits, a motion control unit, pyranometer, GPS receiver, and an anemometer. The real-time control algorithm enables the solar tracker to operate automatically without external control as a stand-alone system, combining the advantages of the open-loop and the closed-loop control methods. The pyranometer is employed to continuously send radiation data to the controller if the measured radiation is above the lower radiation limit the photovoltaic panel can generate power, guaranteeing the solar tracking process to be highly efficient. The anemometer is utilized in the system to ensure that the solar tracking procedure halts under high wind speed conditions to protect the entire system. Latitude, longitude, altitude, date, and real-time clock data are provided by GPS receiver. The algorithm calculates solar time using astronomical equations with GPS data and converts it to pulse-width modulated motor control signal. The overall objective of this study is to develop a control algorithm that improves performance and reliability of the two-axis solar tracker, focusing on optimization of the controller board, drive hardware, and software.
Design, optimization, and control of tensegrity structures
Masic, Milenko
The contributions of this dissertation may be divided into four categories. The first category involves developing a systematic form-finding method for general and symmetric tensegrity structures. As an extension of the available results, different shape constraints are incorporated in the problem. Methods for treatment of these constraints are considered and proposed. A systematic formulation of the form-finding problem for symmetric tensegrity structures is introduced, and it uses the symmetry to reduce both the number of equations and the number of variables in the problem. The equilibrium analysis of modular tensegrities exploits their peculiar symmetry. The tensegrity similarity transformation completes the contributions in the area of enabling tools for tensegrity form-finding. The second group of contributions develops the methods for optimal mass-to-stiffness-ratio design of tensegrity structures. This technique represents the state-of-the-art for the static design of tensegrity structures. It is an extension of the results available for the topology optimization of truss structures. Besides guaranteeing that the final design satisfies the tensegrity paradigm, the problem constrains the structure from different modes of failure, which makes it very general. The open-loop control of the shape of modular tensegrities is the third contribution of the dissertation. This analytical result offers a closed form solution for the control of the reconfiguration of modular structures. Applications range from the deployment and stowing of large-scale space structures to the locomotion-inducing control for biologically inspired structures. The control algorithm is applicable regardless of the size of the structures, and it represents a very general result for a large class of tensegrities. Controlled deployments of large-scale tensegrity plates and tensegrity towers are shown as examples that demonstrate the full potential of this reconfiguration strategy. The last
Directory of Open Access Journals (Sweden)
Oscar Salviano Silva Filho
2007-01-01
Full Text Available Neste artigo são discutidos aspectos relacionados à tomada de decisão dentro de um processo hierárquico de planejamento da produção. Neste contexto, foi desenvolvido um modelo agregado para um problema de planejamento estocástico, com restrições de chances nas variáveis de decisão, que serve como meta de produção a ser atingida nos níveis inferiores da hierarquia. Solução ótima global para este tipo de problema seqüencial é muito difícil, a menos em casos de pequena dimensão via algoritmo de programação dinâmica estocástica. Assim, como alternativa, investigou-se a utilização de uma heurística subótima denominada open-loop feedback controller (OLFC, que é muito simples de ser implementada computacionalmente. Como exemplo de aplicação, um problema mono-produto de planejamento agregado da produção foi formulado e a política subótima OLFC foi comparada à solução ótima usando o algoritmo de programação dinâmica estocástica. Além dos aspectos numéricos, algumas propriedades são analisadas, como a quase adaptabilidade do procedimento OLFC.In this paper, the need for developing an aggregate production plan within a hierarchical decision process is discussed. A production planning problem formulated as a sequential stochastic optimal control model with chance constraints is introduced. A global optimal solution is only possible in particular cases with a small number of decision variables. As a consequence, near optimal solutions are usually developed and applied to solve sequential stochastic problems. A suboptimal approach, called Open-Loop Feedback Controller (OLFC, is proposed to solve the aggregate stochastic production planning problem. A simple example is used to evaluate the performance of the OLFC solution computationally in relation to the global (closed-loop and mean (open-loop optimal solutions. Quasi-adaptability property of the OLFC procedure is analysed in this example.
Optimal observability-based modelling, design and characterization of piezoelectric microactuators
El Khoury Moussa, Roba; Grossard, Mathieu; Boukallel, Mehdi; Hubert, Arnaud; Chaillet, Nicolas
2013-07-01
This paper deals with the optimal design of monolithic piezoelectric microactuators with integrated proprioceptive sensors. Dedicated to the microrobotic and micromechatronic fields, this work details the modelling and the characterization of compliant structures with integrated actuating and sensing elements. The proposed optimal design procedure addresses not only static criteria but also dynamic ones. This leads to microdevices which are better performing with regards to mechanical (displacement, force, etc) and control (dynamics, stability, precision) characteristics. The efficient design of such devices is achieved using a flexible building block method. A topological optimization method combined with an evolutionary algorithm is used to optimize the design of a truss-like planar structure. This method chooses the best location among the different piezoelectric elements. Different mechanical, actuation or sensing elements are accordingly chosen from a data bank. From the control point of view, optimization criteria are considered, to enforce the observability of the vibrational dominant modes of the structure. Therefore, control and observation Gramians are exploited in the optimal design to shape the open-loop frequency response of both actuation and sensing functions of the integrated device. In the last part of the paper, based on these results, the optimal design and manufacture of an innovative piezoelectric flexible microgripper is proposed. The prototype is manufactured from a monolithic piezoelectric material (PIC 151). Its reduced size (15 mm × 18 mm) fits the requirements of both microrobotic and micromechatronic applications, and it is suitable for micromanipulation tasks. Closing the paper, the characterization and the performance of this integrated microactuator and the efficiency of the optimal design procedure for micromechatronic applications are shown.
NN-Based Implicit Stochastic Optimization of Multi-Reservoir Systems Management
Directory of Open Access Journals (Sweden)
Matteo Sangiorgio
2018-03-01
Full Text Available Multi-reservoir systems management is complex because of the uncertainty on future events and the variety of purposes, usually conflicting, of the involved actors. An efficient management of these systems can help improving resource allocation, preventing political crisis and reducing the conflicts between the stakeholders. Bellman stochastic dynamic programming (SDP is the most famous among the many proposed approaches to solve this optimal control problem. Unfortunately, SDP is affected by the curse of dimensionality: computational effort increases exponentially with the complexity of the considered system (i.e., number of reservoirs, and the problem rapidly becomes intractable. This paper proposes an implicit stochastic optimization approach for the solution of the reservoir management problem. The core idea is using extremely flexible functions, such as artificial neural networks (NN, for designing release rules which approximate the optimal policies obtained by an open-loop approach. These trained NNs can then be used to take decisions in real time. The approach thus requires a sufficiently long series of historical or synthetic inflows, and the definition of a compromise solution to be approximated. This work analyzes with particular emphasis the importance of the information which represents the input of the control laws, investigating the effects of different degrees of completeness. The methodology is applied to the Nile River basin considering the main management objectives (minimization of the irrigation water deficit and maximization of the hydropower production, but can be easily adopted also in other cases.
Motion generation of peristaltic mobile robot with particle swarm optimization algorithm
Homma, Takahiro; Kamamichi, Norihiro
2015-03-01
In developments of robots, bio-mimetics is attracting attention, which is a technology for the design of the structure and function inspired from biological system. There are a lot of examples of bio-mimetics in robotics such as legged robots, flapping robots, insect-type robots, fish-type robots. In this study, we focus on the motion of earthworm and aim to develop a peristaltic mobile robot. The earthworm is a slender animal moving in soil. It has a segmented body, and each segment can be shorted and lengthened by muscular actions. It can move forward by traveling expanding motions of each segment backward. By mimicking the structure and motion of the earthworm, we can construct a robot with high locomotive performance against an irregular ground or a narrow space. In this paper, to investigate the motion analytically, a dynamical model is introduced, which consist of a series-connected multi-mass model. Simple periodic patterns which mimic the motions of earthworms are applied in an open-loop fashion, and the moving patterns are verified through numerical simulations. Furthermore, to generate efficient motion of the robot, a particle swarm optimization algorithm, one of the meta-heuristic optimization, is applied. The optimized results are investigated by comparing to simple periodic patterns.
Directory of Open Access Journals (Sweden)
Hanniel Ferreira Sarmento de Freitas
2017-11-01
Full Text Available Due to growing worldwide energy demand, the search for diversification of the energy matrix stands out as an important research topic. Bioethanol represents a notable alternative of renewable and environmental-friendly energy sources extracted from biomass, the bioenergy. Thus, the assurance of optimal growth conditions in the fermenter through operational variables manipulation is cardinal for the maximization of the ethanol production process yield. The current work focuses in the determination of optimal control scheme for the fermenter feed rate and batch end-time, evaluating different parametrization profiles, and comparing evolutionary computation techniques, the genetic algorithm (GA and differential evolution (DE, using a dynamic real-time optimization (DRTO approach for the in silico ethanol production optimization. The DRTO was able to optimize the reactor feed rate considering disturbances in the process input. Open-loop tests results obtained for the algorithms were superior to several works presented in the literature. The results indicate that the interaction between the intervals of DRTO cycles and parametrization profile is more significant for the GA, both in terms of ethanol productivity and batch time. In general lines, the present work presents a methodology for control and optimization studies applicable to other bioenergy generation systems.
Ruszczynski, Andrzej
2011-01-01
Optimization is one of the most important areas of modern applied mathematics, with applications in fields from engineering and economics to finance, statistics, management science, and medicine. While many books have addressed its various aspects, Nonlinear Optimization is the first comprehensive treatment that will allow graduate students and researchers to understand its modern ideas, principles, and methods within a reasonable time, but without sacrificing mathematical precision. Andrzej Ruszczynski, a leading expert in the optimization of nonlinear stochastic systems, integrates the theory and the methods of nonlinear optimization in a unified, clear, and mathematically rigorous fashion, with detailed and easy-to-follow proofs illustrated by numerous examples and figures. The book covers convex analysis, the theory of optimality conditions, duality theory, and numerical methods for solving unconstrained and constrained optimization problems. It addresses not only classical material but also modern top...
Energy Technology Data Exchange (ETDEWEB)
Ekonomou, L.; Iracleous, D.P.; Gonos, I.F.; Stathopulos, I.A. [National Technical University of Athens, School of Electrical and Computer Engineering, High Voltage Laboratory, 9 Iroon Politechniou St., Zografou, GR 157 80 Athens (Greece)
2006-04-15
This paper presents a method for the optimal design of high voltage transmission lines taking into consideration shielding and backflashover failure rates. The minimization of suitably defined performance indices, which relate the failures caused by lightning in a transmission line to both line insulation level and tower footing resistance, is aimed. Optimum values for both line insulation level and tower footing resistance are calculated. The method is applied on several operating Hellenic transmission lines of 150 and 400kV, respectively, carefully selected among others, due to their high failure rates during lightning thunderstorms. Special attention has been paid on open loop lines, where a possible failure could bring the system out of service causing significant problems. The obtained design parameters, which reduce the failure rates caused by lightning, are compared with the existing design parameters of the transmission lines leading up to useful conclusions. The proposed optimization method can be proved a valuable tool to the studies of electric power systems designers, intending to reduce the failure rates caused by lightning. (author)
Real-Time Vehicle Energy Management System Based on Optimized Distribution of Electrical Load Power
Directory of Open Access Journals (Sweden)
Yuefei Wang
2016-10-01
Full Text Available As a result of severe environmental pressure and stringent government regulations, refined energy management for vehicles has become inevitable. To improve vehicle fuel economy, this paper presents a bus-based energy management system for the electrical system of internal combustion engine vehicles. Both the model of an intelligent alternator and the model of a lead-acid battery are discussed. According to these models, the energy management for a vehicular electrical system is formulated as a global optimal control problem which aims to minimize fuel consumption. Pontryagin’s minimum principle is applied to solve the optimal control problem to realize a real-time control strategy for electrical energy management in vehicles. The control strategy can change the output of the intelligent alternator and the battery with the changes of electrical load and driving conditions in real-time. Experimental results demonstrate that, compared to the traditional open-loop control strategy, the proposed control strategy for vehicle energy management can effectively reduce fuel consumption and the fuel consumption per 100 km is decreased by approximately 1.7%.
King, Andrew
2008-01-01
Remember when an optimized website was one that merely didn't take all day to appear? Times have changed. Today, website optimization can spell the difference between enterprise success and failure, and it takes a lot more know-how to achieve success. This book is a comprehensive guide to the tips, techniques, secrets, standards, and methods of website optimization. From increasing site traffic to maximizing leads, from revving up responsiveness to increasing navigability, from prospect retention to closing more sales, the world of 21st century website optimization is explored, exemplified a
Optimality Conditions in Vector Optimization
Jiménez, Manuel Arana; Lizana, Antonio Rufián
2011-01-01
Vector optimization is continuously needed in several science fields, particularly in economy, business, engineering, physics and mathematics. The evolution of these fields depends, in part, on the improvements in vector optimization in mathematical programming. The aim of this Ebook is to present the latest developments in vector optimization. The contributions have been written by some of the most eminent researchers in this field of mathematical programming. The Ebook is considered essential for researchers and students in this field.
DEFF Research Database (Denmark)
Birkholm, Klavs
2010-01-01
En undersøgelse af anvendelsen af medicin til optimering af koncentration, hukommelse og følelsestonus. Efterfulgt af etiske overvejelser og anbefalinger til det politiske system......En undersøgelse af anvendelsen af medicin til optimering af koncentration, hukommelse og følelsestonus. Efterfulgt af etiske overvejelser og anbefalinger til det politiske system...
MacBain, Keith M
2009-01-01
Intends to supplement the engineer's box of analysis and design tools making optimization as commonplace as the finite element method in the engineering workplace. This title introduces structural optimization and the methods of nonlinear programming such as Lagrange multipliers, Kuhn-Tucker conditions, and calculus of variations.
Carver, Charles S.; Scheier, Michael F.
2014-01-01
Optimism is a cognitive construct (expectancies regarding future outcomes) that also relates to motivation: optimistic people exert effort, whereas pessimistic people disengage from effort. Study of optimism began largely in health contexts, finding positive associations between optimism and markers of better psychological and physical health. Physical health effects likely occur through differences in both health-promoting behaviors and physiological concomitants of coping. Recently, the scientific study of optimism has extended to the realm of social relations: new evidence indicates that optimists have better social connections, partly because they work harder at them. In this review, we examine the myriad ways this trait can benefit an individual, and our current understanding of the biological basis of optimism. PMID:24630971
Long, Zhili; Wang, Rui; Fang, Jiwen; Dai, Xufei; Li, Zuohua
2017-07-01
Piezoelectric actuators invariably exhibit hysteresis nonlinearities that tend to become significant under the open-loop condition and could cause oscillations and errors in nanometer-positioning tasks. Chaotic map modified particle swarm optimization (MPSO) is proposed and implemented to identify the Prandtl-Ishlinskii model for piezoelectric actuators. Hysteresis compensation is attained through application of an inverse Prandtl-Ishlinskii model, in which the parameters are formulated based on the original model with chaotic map MPSO. To strengthen the diversity and improve the searching ergodicity of the swarm, an initial method of adaptive inertia weight based on a chaotic map is proposed. To compare and prove that the swarm's convergence occurs before stochastic initialization and to attain an optimal particle swarm optimization algorithm, the parameters of a proportional-integral-derivative controller are searched using self-tuning, and the simulated results are used to verify the search effectiveness of chaotic map MPSO. The results show that chaotic map MPSO is superior to its competitors for identifying the Prandtl-Ishlinskii model and that the inverse Prandtl-Ishlinskii model can provide hysteresis compensation under different conditions in a simple and effective manner.
Nonlinear Control of an Open-Loop Open-Winding Motor System with Modulated Converters
Directory of Open Access Journals (Sweden)
Oleschuk V.I.
2017-04-01
Full Text Available Purpose of this work - to provide wider control opportunities for multiphase open-end winding motor drive by modification of basic scheme of space-vector pulse-width modulation (PWM. It has been shown, that the proposed development of basic PWM scheme insures available solutions for realization of specific control dependences and modes of operation of adjustable speed ac drives with different types and kinds of loads. Suitable algorithms of PWM of converters of multiphase drive have been analyzed and compared. Extensive simulation studies have been executed for evaluation of performance and effectiveness of the proposed control strategy. Assessment of harmonic composition of the phase voltages of drive system with modified scheme of space-vector modulation has been done. Results of the executed simulations proved the fact, that the developed techniques of space-vector pulse-width modulation allow providing quarter-wave or half-wave symmetry of waveforms of the output voltage of six-phase adjustable speed drive systems during the analyzed non-standard modes and regimes of its operation.
Programmable Relaxor Open-Loop Mirrors Using Imaging Spatial Encoder (PROMISE) Project
National Aeronautics and Space Administration — Future advanced telescopes require active mirror compensation without the complexity of real-time adaptive control. Current wavefront correctors, while dimensionally...
An Open-Loop Grid Synchronization Approach for Single-Phase Applications
DEFF Research Database (Denmark)
Golestan, Saeed; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez
2018-01-01
in the presence of frequency drifts. This is particularly true in single-phase applications, where the lack of multiple independent input signals makes the implementation of the synchronization technique difficult. The aim of this paper is to develop an effective OLS technique for single-phase power and energy...... applications. The proposed OLS method benefits from a straightforward implementation, a fast dynamic response (a response time less than two cycles of the nominal frequency), and a complete immunity against the DC component in the grid voltage. In addition, the designed OLS method totally blocks (significantly...... attenuates) all harmonics up to the aliasing point under a nominal (off-nominal) frequency. The effectiveness of the designed OLS technique is verified using comparative experimental results....
Investigation of open-loop beam motion at low frequencies at the APS
International Nuclear Information System (INIS)
Kim, S.H.; Decker, G.; Doose, C.; Mangra, D.; Merl, R.
1997-01-01
Sources of transverse beam motion in the APS storage ring have been investigated for ground-motion- and water-system-induced vibrations of the magnet and vacuum systems, and for power supply ripple. The displacement of magnets in a bandwidth of 4-30 Hz have been reduced significantly by inserting viscoelastic damping pads between the girder supports and pedestals, and by welding the magnet cooling headers to the ceiling of the storage ring tunnel. Current ripple on magnet power supplies was identified as a source of horizontal beam motion. Beam motion was measured without the closed-orbit feedback system activated. At β x = 15.4 m and β y = 10.4 m the rms beam motion in the 0.02-30 Hz band was 22.7 μm and 6.3 μm in the horizontal and verticle planes, respectively. A few narrow-band structures of the horizontal beam motion spectrum in the 1-4 Hz band have to be investigated further to identify the sources
Modelling and analysis of an open-loop induction motor drive ...
Indian Academy of Sciences (India)
in the inverter output and also certain change in the funda- mental voltage [1–4]. The change in fundamental voltage is important from the control perspective, and can be modelled as a drop across a fictitious “equivalent” resistance [5–8]. This paper presents an analytical expression for this dead- time equivalent resistance.
An Open-Loop Vector Receiver Architecture for GNSS-Based Scintillation Monitoring
CURRAN JAMES THOMAS; BAVARO MICHELE; FORTUNY GUASCH Joaquim
2014-01-01
GNSS-based studies of the ionosphere are typically conducted using navigation receivers which track both the carrier and code phase either on a satellite-by-satellite basis, or collectively via a vector structure [3]. Information relating to phase and amplitude scintillation is gathered from the receiver’s estimate of the carrier phase and the receiver correlators values, respectively. The quality of these parameters, however, is directly influenced by how well the receiver can track the GNSS...
Closed and Open Loop Subspace System Identification of the Kalman Filter
Directory of Open Access Journals (Sweden)
David Di Ruscio
2009-04-01
Full Text Available Some methods for consistent closed loop subspace system identification presented in the literature are analyzed and compared to a recently published subspace algorithm for both open as well as for closed loop data, the DSR_e algorithm. Some new variants of this algorithm are presented and discussed. Simulation experiments are included in order to illustrate if the algorithms are variance efficient or not.
Quasi-open loop hydraulic ram incremental actuator with power conserving properties
International Nuclear Information System (INIS)
Raymond, E.T.; Robinson, C.W.
1982-01-01
An electric stepping motor, operated by command signals from a computer or a microprocessor, rotates a rotary control member of a distributor valve, for sequencing hydraulic pressure and hence flow to the cylinders of an axial piston hydraulic machine. A group of the cylinders are subjected to pressure and flow and the remaining cylinders are vented to a return line. Rotation of the rotary control valve member sequences pressurization by progressively adding a cylinder to the forward edge to the pressurized group and removing a cylinder from the trailing edge of the pressurized group. The double ended pistons of each new pressurized group function to drive a wobble plate into a new position of equilibrium and then hold it in such position until another change in the makeup of the pressurized group. These pistons also displace hydraulic fluid from the opposite cylinder head which serves as the output of a pumping element. An increment of displacement of the wobble plate occurs in direct response to each command pulse that is received by the stepping motor. Wobble plate displacement drives the rotary valve of the hydraulic power transfer unit, causing it to transfer hydraulic fluid from a first expansible chamber on one side of a piston in a hydraulic ram to a second expansible chamber on the opposite side of the piston. Reverse drive of the hydraulic power transfer unit reverses the direction of transfer of hydraulic fluid between the two expansible chambers
International Nuclear Information System (INIS)
Fan, YaJun; Mu, AnLe; Ma, Tao
2016-01-01
Highlights: • Point absorber wave energy converter is presented. • Piston pump module captures and converts wave energy. • Hydraulic accumulator stores/releases the surplus energy. • Fuzzy controller adjusts the displacement of hydraulic motor. • Generator outputs meet the electricity demand precisely. - Abstract: In this paper, a point absorber wave energy converter combined with offshore wind turbine is proposed. In the system, the wave energy is captured and converted into hydraulic energy by a piston pump module, which is combined with a wind turbine floating platform, and then the hydraulic energy is converted into electricity energy by a variable displacement hydraulic motor and induction generator. In order to smooth and stabilize the captured wave energy, a hydraulic accumulator is applied to store and release the excess energy. In order to meet the demand power a fuzzy controller is designed to adjust the displacement of hydraulic motor and controlled the output power. Simulation under irregular wave condition has been carried out to verify the validity of the mathematical model and the effectiveness of the controller strategy. The results show that the wave energy converter system could deliver the required electricity power precisely as the motor output torque is controlled. The accumulator could damp out all the fluctuations in output power, so the wave energy would become a dispatchable power source.
Signal model of noise in open-loop fiber-optic gyros.
He, K; Ye, W; He, Z
1997-12-01
The characteristics of noise in fiber-optic gyros are analyzed quantitatively. Based on its physical characteristics and on autocorrelation function evidence, the noise is modeled as the addition of fractal Brownian motion (FBM) and Gaussian white noise (GWN). The value of self-similarlity parameter H in FBM and the intensity of GWN, sigma(w), in the model are robustly determined with an algorithm based on an orthonormal wavelet transform, which demonstrates well the coexistence of the long- and short-term correlation components of the gyro noise. Moreover, it is revealed that FBM dominates the gyro noise, whereas the GWN is minor.
Advanced Hybrid Spacesuit Concept Featuring Integrated Open Loop and Closed Loop Ventilation Systems
Daniel, Brian A.; Fitzpatrick, Garret R.; Gohmert, Dustin M.; Ybarra, Rick M.; Dub, Mark O.
2013-01-01
A document discusses the design and prototype of an advanced spacesuit concept that integrates the capability to function seamlessly with multiple ventilation system approaches. Traditionally, spacesuits are designed to operate both dependently and independently of a host vehicle environment control and life support system (ECLSS). Spacesuits that operate independent of vehicle-provided ECLSS services must do so with equipment selfcontained within or on the spacesuit. Suits that are dependent on vehicle-provided consumables must remain physically connected to and integrated with the vehicle to operate properly. This innovation is the design and prototype of a hybrid spacesuit approach that configures the spacesuit to seamlessly interface and integrate with either type of vehicular systems, while still maintaining the ability to function completely independent of the vehicle. An existing Advanced Crew Escape Suit (ACES) was utilized as the platform from which to develop the innovation. The ACES was retrofitted with selected components and one-off items to achieve the objective. The ventilation system concept was developed and prototyped/retrofitted to an existing ACES. Components were selected to provide suit connectors, hoses/umbilicals, internal breathing system ducting/ conduits, etc. The concept utilizes a lowpressure- drop, high-flow ventilation system that serves as a conduit from the vehicle supply into the suit, up through a neck seal, into the breathing helmet cavity, back down through the neck seal, out of the suit, and returned to the vehicle. The concept also utilizes a modified demand-based breathing system configured to function seamlessly with the low-pressure-drop closed-loop ventilation system.
Modelling and analysis of an open-loop induction motor drive ...
Indian Academy of Sciences (India)
for the same in terms of inverter dead-time, switching frequency, modulation index and load impedance. The notion of dead-time equivalent resistance is shown to simplify the solution of the non-linear steady-state model. The analytically evaluated steady-state solutions are validated through numerical simulations and ...
Open-loop recycling: A LCA case study of PET bottle-to-fibre-recycling
Shen, L.; Worrell, E.; Patel, M.K.
2010-01-01
This study assesses the environmental impact of polyethylene terephthalate (PET) bottle-to-fibre recycling using the methodology of life-cycle assessment (LCA). Four recycling cases, including mechanical recycling, semi-mechanical recycling, back-to-oligomer recycling and back-to-monomer recycling
Open loop control of filament heating power supply for large volume plasma device
International Nuclear Information System (INIS)
Sugandhi, R.; Srivastava, P.K.; Sanyasi, A.K.; Srivastav, Prabhakar; Awasthi, L.M.; Mattoo, S.K.
2017-01-01
A power supply (20 V, 10 kA) for powering the filamentary cathode has been procured, interfaced and integrated with the centralized control system of Large Volume Plasma Device (LVPD). Software interface has been developed on the standard Modbus RTU communication protocol. It facilitates the dashboard for configuration, on line status monitoring, alarm management, data acquisition, synchronization and controls. It has been tested for stable operation of the power supply for the operational capabilities. The paper highlights the motivation, interface description, implementation and results obtained.
International Nuclear Information System (INIS)
Masoud, Ibrahim T.; Abdel-Jabbar, Nabil; Qasim, Muhammad; Chebbi, Rachid
2016-01-01
Highlights: • HEN total annualized cost, heat recovery, and controllability are considered in the framework. • Steady-state and dynamic simulations are performed. • Effect of bypass on total annualized cost and controllability is reported. • Optimum bypass fractions are found from closed and open-loop efforts. - Abstract: The problem of interaction between economic design and control system design of heat exchanger networks (HENs) is addressed in this work. The controllability issues are incorporated in the classical design of HENs. A new methodological framework is proposed to account for both economics and controllability of HENs. Two classical design methods are employed, namely, Pinch and superstructure designs. Controllability measures such as relative gain array (RGA) and singular value decomposition (SVD) are used. The proposed framework also presents a bypass placement strategy for optimal control of the designed network. A case study is used to test the applicability of the framework and to assess both economics and controllability. The results indicate that the superstructure design is more economical and controllable compared to the Pinch design. The controllability of the designed HEN is evaluated using Aspen-HYSYS closed-loop dynamic simulator. In addition, a sensitivity analysis is performed to study the effect of bypass fractions on the total annualized cost and controllability of the designed HEN. The analysis shows that increasing any bypass fraction increases the total annualized cost. However, the trend with the total annualized cost was not observed with respect to the control effort manifested by minimizing the integral of the squared errors (ISE) between the controlled stream temperatures and their targets (set-points). An optimal ISE point is found at a certain bypass fraction, which does not correspond to the minimal total annualized cost. The bypass fractions are validated via open-loop simulation and the additional cooling and
Frajtova-Michalikova, Katarina; Spuchľakova, Erika; Misankova, Maria
2015-01-01
In this paper Portfolio Optimization techniques were used to determine the most favorable investment portfolio. In particular, stock indices of three companies, namely Microsoft Corporation, Christian Dior Fashion House and Shevron Corporation were evaluated. Using this data the amounts invested in each asset when a portfolio is chosen on the efficient frontier were calculated. In addition, the Portfolio with minimum variance, tangency portfolio and optimal Markowitz portfolio are presented.
Directory of Open Access Journals (Sweden)
Olimpia PECINGINA
2016-05-01
Full Text Available Throughout the ages, man has continuously been involved with the process of optimization. In its earliest form, optimization consisted of unscientific rituals and prejudices like pouring libations and sacrificing animals to the gods, con- sulting the oracles, observing the positions of the stars, and watching the flight of birds. When the circumstances were appropriate, the timing was thought to be auspicious (or optimum for planting the crops or embarking on a war.
2015-07-06
vehicle routing [11], [6], probabilistic traveling salesman problems [9], location problems [10], and generalized assignment [1], among others. Next we...Mercure, A priori optimization of the probabilistic traveling salesman problem , Operations research 42 (1994), 543–549. [10] G. Laporte, F.V. Louveaux...standard mixed-integer programming (MIP) formulations of selective optimization problems . While such formulations can be attacked by commercial
International Nuclear Information System (INIS)
Zhang, Lin; Jiang, Jianhua; Cheng, Huan; Deng, Zhonghua; Li, Xi
2015-01-01
Highlights: • Efficiency optimization associated with simultaneous power and thermal management. • Fast load tracing, fuel starvation, high efficiency and operating safety are considered. • Open loop pre-conditioning current strategy is proposed for load step-up transients. • Feedback control scheme is proposed for load step-up transients. - Abstract: The slow power tracking, operating safety, especially the fuel exhaustion, and high efficiency considerations are the key issues for integrated solid oxide fuel cell (SOFC) systems during power step up transients, resulting in the relatively poor dynamic capabilities and make the transient load following very challenging and must be enhanced. To this end, this paper first focus on addressing the efficiency optimization associated with simultaneous power and thermal management of a 5-kW SOFC system. Particularly, a traverse optimization process including cubic convolution interpolation algorithm are proposed to obtain optimal operating points (OOPs) with the maximum efficiency. Then this paper investigate the current implications on system step-up transient performance, then a two stage pre-conditioning current strategy and a feedback power reference control scheme is proposed for load step-up transients to balance fast load following and fuel starvation, after that safe thermal transient is validated. Simulation results show the efficacy of the control design by demonstrating the fast load following ability while maintaining the safe operation, thus safe; efficient and fast load transition can be achieved
International Nuclear Information System (INIS)
Gholami, H.; Sarwat, A.I.; Hosseinian, H.; Khalilnejad, A.
2015-01-01
Highlights: • Electro-thermal performance of open-loop controlled dual axis CPVT is investigated. • For using the absorbed heat, active ventilation with a heat storage tank is used. • Economic optimization of the system is performed, using Frog Leap algorithm. • Detailed model of all sections is simulated with their characteristics evaluation. • Triple-junction photovoltaic cells, which are the most recent technology, are used. - Abstract: In this study, design and optimization of a concentrated photovoltaic thermal (CPVT) system considering electrical, mechanical, and economical aspects is investigated. For this purpose, each section of the system is simulated in MATLAB, in detail. Triple-junction photovoltaic cells, which are the most recent technology, are used in this study. They are more efficient in comparison to conventional photovoltaic cells. Unlike ordinary procedures, in this work active ventilation is used for absorbing the thermal power of radiation, using heat storage tanks, which not only results in increasing the electrical efficiency of the system through decreasing the temperature, but also leads to storing and managing produced thermal energy and increasing the total efficiency of the system up to 85 percent. The operation of the CPVT system is investigated for total hours of the year, considering the needed thermal load, meteorological conditions, and hourly radiation of Khuznin, a city in Qazvin province, Iran. Finally, the collector used for this system is optimized economically, using frog leap algorithm, which resulted in the cost of 13.4 $/m 2 for a collector with the optimal distance between tubes of 6.34 cm.
Toulabi, Mohammadreza; Bahrami, Shahab; Ranjbar, Ali Mohammad
2018-03-01
In most of the existing studies, the frequency response in the variable speed wind turbines (VSWTs) is simply realized by changing the torque set-point via appropriate inputs such as frequency deviations signal. However, effective dynamics and systematic process design have not been comprehensively discussed yet. Accordingly, this paper proposes a proportional-derivative frequency controller and investigates its performance in a wind farm consisting of several VSWTs. A band-pass filter is deployed before the proposed controller to avoid responding to either steady state frequency deviations or high rate of change of frequency. To design the controller, the frequency model of the wind farm is first characterized. The proposed controller is then designed based on the obtained open loop system. The stability region associated with the controller parameters is analytically determined by decomposing the closed-loop system's characteristic polynomial into the odd and even parts. The performance of the proposed controller is evaluated through extensive simulations in MATLAB/Simulink environment in a power system comprising a high penetration of VSWTs equipped with the proposed controller. Finally, based on the obtained feasible area and appropriate objective function, the optimal values associated with the controller parameters are determined using the genetic algorithm (GA). Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.
International Nuclear Information System (INIS)
Zeevaert, T.
1998-01-01
Radiological optimization is one of the basic principles in each radiation-protection system and it is a basic requirement in the safety standards for radiation protection in the European Communities. The objectives of the research, performed in this field at the Belgian Nuclear Research Centre SCK-CEN, are: (1) to implement the ALARA principles in activities with radiological consequences; (2) to develop methodologies for optimization techniques in decision-aiding; (3) to optimize radiological assessment models by validation and intercomparison; (4) to improve methods to assess in real time the radiological hazards in the environment in case of an accident; (5) to develop methods and programmes to assist decision-makers during a nuclear emergency; (6) to support the policy of radioactive waste management authorities in the field of radiation protection; (7) to investigate existing software programmes in the domain of multi criteria analysis. The main achievements for 1997 are given
DEFF Research Database (Denmark)
Frandsen, P. E.; Jonasson, K.; Nielsen, Hans Bruun
1999-01-01
This lecture note is intended for use in the course 04212 Optimization and Data Fitting at the Technincal University of Denmark. It covers about 25% of the curriculum. Hopefully, the note may be useful also to interested persons not participating in that course. The aim of the note is to give...... an introduction to algorithms for unconstrained optimization. We present Conjugate Gradient, Damped Newton and Quasi Newton methods together with the relevant theoretical background. The reader is assumed to be familiar with algorithms for solving linear and nonlinear system of equations, at a level corresponding...
Optimal firm growth under the threat of entry
Kort, Peter; Wrzaczek, S.
2015-01-01
The paper studies the incumbent-entrant problem in a fully dynamic setting. We find that under an open-loop information structure the incumbent anticipates entry by overinvesting, whereas in the Markov perfect equilibrium the incumbent slightly underinvests in the period before the entry. The entry
International Nuclear Information System (INIS)
Nezami, M; Gholami, B
2016-01-01
The active flutter control of supersonic sandwich panels with regular honeycomb interlayers under impact load excitation is studied using piezoelectric patches. A non-dominated sorting-based multi-objective evolutionary algorithm, called non-dominated sorting genetic algorithm II (NSGA-II) is suggested to find the optimal locations for different numbers of piezoelectric actuator/sensor pairs. Quasi-steady first order supersonic piston theory is employed to define aerodynamic loading and the p-method is applied to find the flutter bounds. Hamilton’s principle in conjunction with the generalized Fourier expansions and Galerkin method are used to develop the dynamical model of the structural systems in the state-space domain. The classical Runge–Kutta time integration algorithm is then used to calculate the open-loop aeroelastic response of the system. The maximum flutter velocity and minimum voltage applied to actuators are calculated according to the optimal locations of piezoelectric patches obtained using the NSGA-II and then the proportional feedback is used to actively suppress the closed loop system response. Finally the control effects, using the two different controllers, are compared. (paper)
Eckmann, B
2008-01-01
At the close of the 1980s, the independent contributions of Yann Brenier, Mike Cullen and John Mather launched a revolution in the venerable field of optimal transport founded by G Monge in the 18th century, which has made breathtaking forays into various other domains of mathematics ever since. The author presents a broad overview of this area.
DEFF Research Database (Denmark)
Bendsøe, Martin P.; Sigmund, Ole
2007-01-01
Taking as a starting point a design case for a compliant mechanism (a force inverter), the fundamental elements of topology optimization are described. The basis for the developments is a FEM format for this design problem and emphasis is given to the parameterization of design as a raster image...
Optimal subsidy policy for accelerating the diffusion of green products
Directory of Open Access Journals (Sweden)
Hongguang Peng
2013-06-01
Full Text Available Purpose: We consider a dynamic duopoly market in which two firms respectively produce green products and conventional products. The two types of product can substitute each other in some degree. Their demand rates depend on not only prices but the consumers’ increasing environmental awareness. Too high initial cost relative to conventional products becomes one of the major obstacles that hinder the adoption of green products. The government employs subsidy policy to trigger the adoption of green products. The purpose of the paper is to explore the optimal subsidy strategy to fulfill the government’s objective. Design/methodology/approach: We suppose the players in the game employ open-loop strategies, which make sense since the government generally cannot alter his policy for political and economic purposes. We take a differential game approach and use backward induction to analyze the firms’ pricing strategy under Cournot competition, and then focus upon a Stackelberg equilibrium to find the optimal subsidy strategy of the government. Findings: The results show that the more remarkable the energy or environmental performance, or the bigger the initial cost of green products, the higher the subsidy level should be. Due to the increasing environmental awareness and the learning curve, the optimal subsidy level decreases over time. Research limitations/implications: In our model several simplifying assumptions are made to keep the analysis more tractable. In particular, we have assumed only one type of green product. In reality several types of product with different energy or environmental performances exist. Our research can be extended in future work to take into account product differentiation on energy or environmental performance and devise a discriminatory subsidy policy accordingly. Originality/value: In the paper we set the objective of the government as minimizing the total social cost induced by the energy consumption or
Aschepkov, Leonid T; Kim, Taekyun; Agarwal, Ravi P
2016-01-01
This book is based on lectures from a one-year course at the Far Eastern Federal University (Vladivostok, Russia) as well as on workshops on optimal control offered to students at various mathematical departments at the university level. The main themes of the theory of linear and nonlinear systems are considered, including the basic problem of establishing the necessary and sufficient conditions of optimal processes. In the first part of the course, the theory of linear control systems is constructed on the basis of the separation theorem and the concept of a reachability set. The authors prove the closure of a reachability set in the class of piecewise continuous controls, and the problems of controllability, observability, identification, performance and terminal control are also considered. The second part of the course is devoted to nonlinear control systems. Using the method of variations and the Lagrange multipliers rule of nonlinear problems, the authors prove the Pontryagin maximum principle for prob...
Parker, R Gary
1988-01-01
This book treats the fundamental issues and algorithmic strategies emerging as the core of the discipline of discrete optimization in a comprehensive and rigorous fashion. Following an introductory chapter on computational complexity, the basic algorithmic results for the two major models of polynomial algorithms are introduced--models using matroids and linear programming. Further chapters treat the major non-polynomial algorithms: branch-and-bound and cutting planes. The text concludes with a chapter on heuristic algorithms.Several appendixes are included which review the fundamental ideas o
Optimal Force Control of Vibro-Impact Systems for Autonomous Drilling Applications
Aldrich, Jack B.; Okon, Avi B.
2012-01-01
optimally in the context of both open-loop and closed-loop control modes (using standard realtime control hardware).
Aircraft Trajectory Optimization Using Parametric Optimization Theory
Valenzuela Romero, Alfonso
2012-01-01
In this thesis, a study of the optimization of aircraft trajectories using parametric optimization theory is presented. To that end, an approach based on the use of predefined trajectory patterns and parametric optimization is proposed. The trajectory pat
A Study of Linear vs. Nonlinear Control Techniques for the Reconfiguration of Satellite Formations
National Research Council Canada - National Science Library
Irvin, David
2001-01-01
This thesis investigates several linear and nonlinear feedback control methods for satellite formation reconfigurations and compares them to a near optimal open loop, discrete-time, impulsive maneuver...
Felici, Federico; Sauter, Olivier; Goodman, Timothy; Paley, James
2010-11-01
Control of the plasma current density and safety factor profile evolution in a tokamak is crucial for accessing advanced regimes. The evolution of the current density profile is steered by a combination of inductive voltage and auxiliary current drive actuators, and is nonlinearly coupled to the evolution of the (ion/electron) temperature and density profiles. Using appropriate simplifications, a model has been obtained which can be simulated on time scales faster than the tokamak discharge itself, but still retains the essential physics describing the nonlinear coupling between the profiles. This model, dubbed RAPTOR (Rapid Plasma Transport simulatOR) has been implemented in the new real-time control system on the TCV tokamak at CRPP, and can be used for real-time reconstruction and model-based control of the q profile. It can also be used off-line to determine optimal actuator trajectories in open loop simulations to steer the plasma profiles towards their required steady-state shapes while remaining within a constrained set of allowable profiles.
[SIAM conference on optimization
Energy Technology Data Exchange (ETDEWEB)
1992-05-10
Abstracts are presented of 63 papers on the following topics: large-scale optimization, interior-point methods, algorithms for optimization, problems in control, network optimization methods, and parallel algorithms for optimization problems.
Multi-mode ultrasonic welding control and optimization
Tang, Jason C.H.; Cai, Wayne W
2013-05-28
A system and method for providing multi-mode control of an ultrasonic welding system. In one embodiment, the control modes include the energy of the weld, the time of the welding process and the compression displacement of the parts being welded during the welding process. The method includes providing thresholds for each of the modes, and terminating the welding process after the threshold for each mode has been reached, the threshold for more than one mode has been reached or the threshold for one of the modes has been reached. The welding control can be either open-loop or closed-loop, where the open-loop process provides the mode thresholds and once one or more of those thresholds is reached the welding process is terminated. The closed-loop control provides feedback of the weld energy and/or the compression displacement so that the weld power and/or weld pressure can be increased or decreased accordingly.
Optimized carbon dioxide removal model for gas fired power plant
Arachchige, Udara Sampath P.; Mohsin, Muhammad; Melaaen, Morten Christian
2012-01-01
The carbon capture process model was developed for 500MW gas-fired power plant flue gas treating. Three different efficiencies, 85%, 90%, and 95%, were used to implement the model in Aspen Plus. The electrolyte NRTL rate base model was used to develop the model. The selected solvent properties were used to develop and implemented model is used for further simulations. The implemented open loop base case model of 85% removal efficiency is used to check the parameters' effect on removal efficie...
Different types of maximum power point tracking techniques for renewable energy systems: A survey
Khan, Mohammad Junaid; Shukla, Praveen; Mustafa, Rashid; Chatterji, S.; Mathew, Lini
2016-03-01
Global demand for electricity is increasing while production of energy from fossil fuels is declining and therefore the obvious choice of the clean energy source that is abundant and could provide security for development future is energy from the sun. In this paper, the characteristic of the supply voltage of the photovoltaic generator is nonlinear and exhibits multiple peaks, including many local peaks and a global peak in non-uniform irradiance. To keep global peak, MPPT is the important component of photovoltaic systems. Although many review articles discussed conventional techniques such as P & O, incremental conductance, the correlation ripple control and very few attempts have been made with intelligent MPPT techniques. This document also discusses different algorithms based on fuzzy logic, Ant Colony Optimization, Genetic Algorithm, artificial neural networks, Particle Swarm Optimization Algorithm Firefly, Extremum seeking control method and hybrid methods applied to the monitoring of maximum value of power at point in systems of photovoltaic under changing conditions of irradiance.
Diesel-Minimal Combustion Control of a Natural Gas-Diesel Engine
Directory of Open Access Journals (Sweden)
Florian Zurbriggen
2016-01-01
Full Text Available This paper investigates the combustion phasing control of natural gas-diesel engines. In this study, the combustion phasing is influenced by manipulating the start and the duration of the diesel injection. Instead of using both degrees of freedom to control the center of combustion only, we propose a method that simultaneously controls the combustion phasing and minimizes the amount of diesel used. Minimizing the amount of diesel while keeping the center of combustion at a constant value is formulated as an optimization problem with an equality constraint. A combination of feedback control and extremum seeking is used to solve this optimization problem online. The necessity to separate the different time scales is discussed and a structure is proposed that facilitates this separation for this specific example. The proposed method is validated by experiments on a test bench.
Optimization modeling with spreadsheets
Baker, Kenneth R
2015-01-01
An accessible introduction to optimization analysis using spreadsheets Updated and revised, Optimization Modeling with Spreadsheets, Third Edition emphasizes model building skills in optimization analysis. By emphasizing both spreadsheet modeling and optimization tools in the freely available Microsoft® Office Excel® Solver, the book illustrates how to find solutions to real-world optimization problems without needing additional specialized software. The Third Edition includes many practical applications of optimization models as well as a systematic framework that il
Prediction of Longitudinal Pilot Induced Oscillations Using the Optimal Control Model
1989-12-01
time-varying statistical behavior over the ensemble of possible trajectories. It takes into account random system ’noises’ as well as pilot ’noises...ADEQUATE RUNWAY ALIGNMENT: DESIRED TOUCHDOWN SINK RATE: MEDIUM AGGRESSIVENESS: HIGH SPECIAL CONTROL: AGGRESIVE CORRECTIONS THEN OPEN LOOP REASON APP
Applications of combinatorial optimization
Paschos, Vangelis Th
2013-01-01
Combinatorial optimization is a multidisciplinary scientific area, lying in the interface of three major scientific domains: mathematics, theoretical computer science and management. The three volumes of the Combinatorial Optimization series aims to cover a wide range of topics in this area. These topics also deal with fundamental notions and approaches as with several classical applications of combinatorial optimization. "Applications of Combinatorial Optimization" is presenting a certain number among the most common and well-known applications of Combinatorial Optimization.
Global Optimization using Interval Analysis : Interval Optimization for Aerospace Applications
Van Kampen, E.
2010-01-01
Optimization is an important element in aerospace related research. It is encountered for example in trajectory optimization problems, such as: satellite formation flying, spacecraft re-entry optimization and airport approach and departure optimization; in control optimization, for example in
Model Based Open-Loop Wind Farm Control Using Active Power for Power Increase and Load Reduction
Hyungyu Kim; Kwansu Kim; Insu Paek
2017-01-01
A new wind farm control algorithm that adjusts the power output of the most upstream wind turbine in a wind farm for power increase and load reduction was developed in this study. The algorithm finds power commands to individual wind turbines to maximize the total power output from the wind farm when the power command from the transmission system operator is larger than the total available power from the wind farm. To validate this wind farm control algorithm, a relatively high fidelity wind ...
Lee, Dongsoo; Kim, Hongjin; Lee, Kang-Yoon
2014-05-01
In this paper, a 20-40 MHz low-power clock oscillator is presented to provide the frequency reference in data interface applications. The frequency source is referenced to a frequency-calibrated and temperature-compensated 2.5 GHz LC VCO that is implemented with a bondwire inductor. Class-C type VCO is adopted in order to improve the phase noise and reduce the current consumption. A full digital frequency calibration circuit is proposed to cover the wide output frequency range minimizing the frequency variation. External crystal oscillator (REF_CLK) is used only for the absolute frequency calibration at the initial programming stage and is not needed after the programming stage. On the other hand, temperature compensation is performed in an analogue way by controlling the varactor in the LC VCO. This chip is fabricated using 0.18-µm CMOS with the option of lateral PNP transistor. Lateral PNP transistors are used in the temperature compensation circuits. It can be implemented laterally in standard CMOS process. The power consumption is 4.8 mW from a 1.8 V supply. The accuracy of the frequency is ±58 ppm from -20°C to 80°C. The nominal phase noise at 1 MHz and period jitter is -122 dBc/Hz and 2 ps, respectively, when the output frequency is 25 MHz.
He, Jiayuan; Zhang, Dingguo; Jiang, Ning; Sheng, Xinjun; Farina, Dario; Zhu, Xiangyang
2015-08-01
Objective. Recent studies have reported that the classification performance of electromyographic (EMG) signals degrades over time without proper classification retraining. This problem is relevant for the applications of EMG pattern recognition in the control of active prostheses. Approach. In this study we investigated the changes in EMG classification performance over 11 consecutive days in eight able-bodied subjects and two amputees. Main results. It was observed that, when the classifier was trained on data from one day and tested on data from the following day, the classification error decreased exponentially but plateaued after four days for able-bodied subjects and six to nine days for amputees. The between-day performance became gradually closer to the corresponding within-day performance. Significance. These results indicate that the relative changes in EMG signal features over time become progressively smaller when the number of days during which the subjects perform the pre-defined motions are increased. The performance of the motor tasks is thus more consistent over time, resulting in more repeatable EMG patterns, even if the subjects do not have any external feedback on their performance. The learning curves for both able-bodied subjects and subjects with limb deficiencies could be modeled as an exponential function. These results provide important insights into the user adaptation characteristics during practical long-term myoelectric control applications, with implications for the design of an adaptive pattern recognition system.
Burté, L.; Farasin, J.; Cravotta, C., III; Gerard, M. F.; Cotiche Baranger, C.; Aquilina, L.; Le Borgne, T.
2017-12-01
Geothermal systems using shallow aquifers are commonly used for heating and cooling. The sustainability of these systems can be severely impacted by the occurrence of clogging process. The geothermal loop operation (including pumping of groundwater, filtering and heat extraction through exchangers and cooled water injection) can lead to an unexpected biogeochemical reactivity and scaling formation that can ultimately lead to the shutdown of the geothermal doublet. Here, we report the results of investigations carried out on a shallow geothermal doublet (dynamic). Hydrochemical data collected at the pumping well showed that groundwater was chemically heterogeneous long the 11 meters well screen. While the aquifer was dominantly oxic, a localized inflow of anoxic water was detected and evaluated to produce about 40% of the total flow . The mixture of chemically heterogeneous water induced by pumping lead to the oxidation of reductive species and thus to the formation of biogenic precipitates responsible for clogging. The impact of pumping waters of different redox potential and chemical characteristics was quantified by numerical modeling using PHREEQC. These results shows that natural chemical heterogeneity can occur at a small scale in heterogeneous aquifers and highlight the importance of their characterization during the production well testing and the geothermal loop operation in order to take preventive measures to avoid clogging.
Choi, Junil; Love, David J.; Bidigare, Patrick
2013-01-01
The concept of deploying a large number of antennas at the base station, often called massive multiple-input multiple-output (MIMO), has drawn considerable interest because of its potential ability to revolutionize current wireless communication systems. Most literature on massive MIMO systems assumes time division duplexing (TDD), although frequency division duplexing (FDD) dominates current cellular systems. Due to the large number of transmit antennas at the base station, currently standar...
Oil Reservoir Production Optimization using Optimal Control
DEFF Research Database (Denmark)
Völcker, Carsten; Jørgensen, John Bagterp; Stenby, Erling Halfdan
2011-01-01
Practical oil reservoir management involves solution of large-scale constrained optimal control problems. In this paper we present a numerical method for solution of large-scale constrained optimal control problems. The method is a single-shooting method that computes the gradients using the adjo...... reservoir using water ooding and smart well technology. Compared to the uncontrolled case, the optimal operation increases the Net Present Value of the oil field by 10%.......Practical oil reservoir management involves solution of large-scale constrained optimal control problems. In this paper we present a numerical method for solution of large-scale constrained optimal control problems. The method is a single-shooting method that computes the gradients using...
Mechanical Design Optimization Using Advanced Optimization Techniques
Rao, R Venkata
2012-01-01
Mechanical design includes an optimization process in which designers always consider objectives such as strength, deflection, weight, wear, corrosion, etc. depending on the requirements. However, design optimization for a complete mechanical assembly leads to a complicated objective function with a large number of design variables. It is a good practice to apply optimization techniques for individual components or intermediate assemblies than a complete assembly. Analytical or numerical methods for calculating the extreme values of a function may perform well in many practical cases, but may fail in more complex design situations. In real design problems, the number of design parameters can be very large and their influence on the value to be optimized (the goal function) can be very complicated, having nonlinear character. In these complex cases, advanced optimization algorithms offer solutions to the problems, because they find a solution near to the global optimum within reasonable time and computational ...
Particle Swarm Optimization Toolbox
Grant, Michael J.
2010-01-01
The Particle Swarm Optimization Toolbox is a library of evolutionary optimization tools developed in the MATLAB environment. The algorithms contained in the library include a genetic algorithm (GA), a single-objective particle swarm optimizer (SOPSO), and a multi-objective particle swarm optimizer (MOPSO). Development focused on both the SOPSO and MOPSO. A GA was included mainly for comparison purposes, and the particle swarm optimizers appeared to perform better for a wide variety of optimization problems. All algorithms are capable of performing unconstrained and constrained optimization. The particle swarm optimizers are capable of performing single and multi-objective optimization. The SOPSO and MOPSO algorithms are based on swarming theory and bird-flocking patterns to search the trade space for the optimal solution or optimal trade in competing objectives. The MOPSO generates Pareto fronts for objectives that are in competition. A GA, based on Darwin evolutionary theory, is also included in the library. The GA consists of individuals that form a population in the design space. The population mates to form offspring at new locations in the design space. These offspring contain traits from both of the parents. The algorithm is based on this combination of traits from parents to hopefully provide an improved solution than either of the original parents. As the algorithm progresses, individuals that hold these optimal traits will emerge as the optimal solutions. Due to the generic design of all optimization algorithms, each algorithm interfaces with a user-supplied objective function. This function serves as a "black-box" to the optimizers in which the only purpose of this function is to evaluate solutions provided by the optimizers. Hence, the user-supplied function can be numerical simulations, analytical functions, etc., since the specific detail of this function is of no concern to the optimizer. These algorithms were originally developed to support entry
Multiple Satellite Trajectory Optimization
National Research Council Canada - National Science Library
Mendy Jr, Paul B
2004-01-01
This thesis develops and validates a satellite trajectory optimization model. A summary is given of the general mathematical principles of dynamic optimal control to minimize fuel consumed or transfer time...
National Aeronautics and Space Administration — An optimal alarm system is simply an optimal level-crossing predictor that can be designed to elicit the fewest false alarms for a fixed detection probability. It...
Optimized manufacturable porous materials
DEFF Research Database (Denmark)
Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard
to include manufacturing constraints in the optimization. This work focuses on incorporating the manufacturability into the optimization procedure, allowing the resulting material structure to be manufactured directly using rapid manufacturing techniques, such as selective laser melting/sintering (SLM...
Euler's fluid equations: Optimal control vs optimization
International Nuclear Information System (INIS)
Holm, Darryl D.
2009-01-01
An optimization method used in image-processing (metamorphosis) is found to imply Euler's equations for incompressible flow of an inviscid fluid, without requiring that the Lagrangian particle labels exactly follow the flow lines of the Eulerian velocity vector field. Thus, an optimal control problem and an optimization problem for incompressible ideal fluid flow both yield the same Euler fluid equations, although their Lagrangian parcel dynamics are different. This is a result of the gauge freedom in the definition of the fluid pressure for an incompressible flow, in combination with the symmetry of fluid dynamics under relabeling of their Lagrangian coordinates. Similar ideas are also illustrated for SO(N) rigid body motion.
Load flow optimization and optimal power flow
Das, J C
2017-01-01
This book discusses the major aspects of load flow, optimization, optimal load flow, and culminates in modern heuristic optimization techniques and evolutionary programming. In the deregulated environment, the economic provision of electrical power to consumers requires knowledge of maintaining a certain power quality and load flow. Many case studies and practical examples are included to emphasize real-world applications. The problems at the end of each chapter can be solved by hand calculations without having to use computer software. The appendices are devoted to calculations of line and cable constants, and solutions to the problems are included throughout the book.
McGuire-Snieckus, Rebecca
2014-01-01
Optimism is generally accepted by psychiatrists, psychologists and other caring professionals as a feature of mental health. Interventions typically rely on cognitive-behavioural tools to encourage individuals to ‘stop negative thought cycles’ and to ‘challenge unhelpful thoughts’. However, evidence suggests that most individuals have persistent biases of optimism and that excessive optimism is not conducive to mental health. How helpful is it to facilitate optimism in individuals who are lik...
Pseudolinear functions and optimization
Mishra, Shashi Kant
2015-01-01
Pseudolinear Functions and Optimization is the first book to focus exclusively on pseudolinear functions, a class of generalized convex functions. It discusses the properties, characterizations, and applications of pseudolinear functions in nonlinear optimization problems.The book describes the characterizations of solution sets of various optimization problems. It examines multiobjective pseudolinear, multiobjective fractional pseudolinear, static minmax pseudolinear, and static minmax fractional pseudolinear optimization problems and their results. The authors extend these results to locally
Optimization techniques in statistics
Rustagi, Jagdish S
1994-01-01
Statistics help guide us to optimal decisions under uncertainty. A large variety of statistical problems are essentially solutions to optimization problems. The mathematical techniques of optimization are fundamentalto statistical theory and practice. In this book, Jagdish Rustagi provides full-spectrum coverage of these methods, ranging from classical optimization and Lagrange multipliers, to numerical techniques using gradients or direct search, to linear, nonlinear, and dynamic programming using the Kuhn-Tucker conditions or the Pontryagin maximal principle. Variational methods and optimiza
Optimization algorithms and applications
Arora, Rajesh Kumar
2015-01-01
Choose the Correct Solution Method for Your Optimization ProblemOptimization: Algorithms and Applications presents a variety of solution techniques for optimization problems, emphasizing concepts rather than rigorous mathematical details and proofs. The book covers both gradient and stochastic methods as solution techniques for unconstrained and constrained optimization problems. It discusses the conjugate gradient method, Broyden-Fletcher-Goldfarb-Shanno algorithm, Powell method, penalty function, augmented Lagrange multiplier method, sequential quadratic programming, method of feasible direc
Cyclus Optimization Strategies
Carlsen, Robert
2015-01-01
Some preliminary deployment optimization techniques and analysis for nuclear fuel cycle transition scenarios. Also discusses high throughput computing (highly parallel) optimization with Cyclus. Finishes with brief discussion of risk mitigation optimization for disruption scenarios. Presented as part of the 2014 Cyclus Review Meeting, October 23, 2014, Argonne National Laboratory.
Caulfield, H. John
2000-07-01
Ordinal optimization is a relatively new field of mathematics that seems never to have been applied to optics. Optics has made extensive use of traditional cardinal optimization. This paper explores the possibility that ordinal optimization might be useful in optics. The conclusion is: Not directly but indirectly.
Schaft, A.J. van der
1987-01-01
It is argued that the existence of symmetries may simplify, as in classical mechanics, the solution of optimal control problems. A procedure for obtaining symmetries for the optimal Hamiltonian resulting from the Maximum Principle is given; this avoids the actual calculation of the optimal
Optimization and optimal control in automotive systems
Kolmanovsky, Ilya; Steinbuch, Maarten; Re, Luigi
2014-01-01
This book demonstrates the use of the optimization techniques that are becoming essential to meet the increasing stringency and variety of requirements for automotive systems. It shows the reader how to move away from earlier approaches, based on some degree of heuristics, to the use of more and more common systematic methods. Even systematic methods can be developed and applied in a large number of forms so the text collects contributions from across the theory, methods and real-world automotive applications of optimization. Greater fuel economy, significant reductions in permissible emissions, new drivability requirements and the generally increasing complexity of automotive systems are among the criteria that the contributing authors set themselves to meet. In many cases multiple and often conflicting requirements give rise to multi-objective constrained optimization problems which are also considered. Some of these problems fall into the domain of the traditional multi-disciplinary optimization applie...
Model-based dynamic control and optimization of gas networks
Energy Technology Data Exchange (ETDEWEB)
Hofsten, Kai
2001-07-01
by a structured sequential quadratic programming algorithm of Newton type. Each open loop problem is specified using a nonlinear prediction model. For each iteration of the quadratic programming procedure, a linear time variant prediction model is formulated. The suggested controller also handles time varying source capacity. Potential problems such as infeasibility and the security of the supply when facing a change in the status of the infrastructure of the transmission system under a transient customer load are treated. Comments on the infeasibility due to errors such as load forecast error, model error and state estimation error are also discussed. A simplified nonlinear model called the creep flow model is used to describe the fluid dynamics inside a natural gas transmission line. Different assumptions and reformulations of this model yield the different control, simulation and optimization models used in this thesis. The control of a single gas transmission line is investigated using linear model predictive control based on instant linearization of the nonlinear model. Model predictive control using a bi quadratic optimization model formulated from the creep flow model is also investigated. A distributed parameter control model of the gas dynamics for a transmission line is formulated. An analytic solution of this model is given with both Neuman boundary conditions and distributed supplies and loads. A transfer function model is developed expressing the dynamics between the defined output and the control and disturbance inputs of the transmission line. Based on the qualitative behaviour observed from the step responses of the solutions of the distributed parameter model formulated in this thesis, simplified transfer function models were developed. These control models expresses the dynamics of a natural gas transmission line with Neuman boundary control and load. Further, these models were used to design a control law, which is a combination of a Smith
Methods of mathematical optimization
Vanderplaats, G. N.
The fundamental principles of numerical optimization methods are reviewed, with an emphasis on potential engineering applications. The basic optimization process is described; unconstrained and constrained minimization problems are defined; a general approach to the design of optimization software programs is outlined; and drawings and diagrams are shown for examples involving (1) the conceptual design of an aircraft, (2) the aerodynamic optimization of an airfoil, (3) the design of an automotive-engine connecting rod, and (4) the optimization of a 'ski-jump' to assist aircraft in taking off from a very short ship deck.
Introduction to Continuous Optimization
DEFF Research Database (Denmark)
Andreasson, Niclas; Evgrafov, Anton; Patriksson, Michael
optimal solutions for continuous optimization models. The main part of the mathematical material therefore concerns the analysis and linear algebra that underlie the workings of convexity and duality, and necessary/sufficient local/global optimality conditions for continuous optimization problems. Natural...... algorithms are then developed from these optimality conditions, and their most important convergence characteristics are analyzed. The book answers many more questions of the form “Why?” and “Why not?” than “How?”. We use only elementary mathematics in the development of the book, yet are rigorous throughout...
Concepts of combinatorial optimization
Paschos, Vangelis Th
2014-01-01
Combinatorial optimization is a multidisciplinary scientific area, lying in the interface of three major scientific domains: mathematics, theoretical computer science and management. The three volumes of the Combinatorial Optimization series aim to cover a wide range of topics in this area. These topics also deal with fundamental notions and approaches as with several classical applications of combinatorial optimization.Concepts of Combinatorial Optimization, is divided into three parts:- On the complexity of combinatorial optimization problems, presenting basics about worst-case and randomi
Optimization theory with applications
Pierre, Donald A
1987-01-01
Optimization principles are of undisputed importance in modern design and system operation. They can be used for many purposes: optimal design of systems, optimal operation of systems, determination of performance limitations of systems, or simply the solution of sets of equations. While most books on optimization are limited to essentially one approach, this volume offers a broad spectrum of approaches, with emphasis on basic techniques from both classical and modern work.After an introductory chapter introducing those system concepts that prevail throughout optimization problems of all typ
Evolutionary constrained optimization
Deb, Kalyanmoy
2015-01-01
This book makes available a self-contained collection of modern research addressing the general constrained optimization problems using evolutionary algorithms. Broadly the topics covered include constraint handling for single and multi-objective optimizations; penalty function based methodology; multi-objective based methodology; new constraint handling mechanism; hybrid methodology; scaling issues in constrained optimization; design of scalable test problems; parameter adaptation in constrained optimization; handling of integer, discrete and mix variables in addition to continuous variables; application of constraint handling techniques to real-world problems; and constrained optimization in dynamic environment. There is also a separate chapter on hybrid optimization, which is gaining lots of popularity nowadays due to its capability of bridging the gap between evolutionary and classical optimization. The material in the book is useful to researchers, novice, and experts alike. The book will also be useful...
Interactive Topology Optimization
DEFF Research Database (Denmark)
Nobel-Jørgensen, Morten
Interactivity is the continuous interaction between the user and the application to solve a task. Topology optimization is the optimization of structures in order to improve stiffness or other objectives. The goal of the thesis is to explore how topology optimization can be used in applications...... in an interactive and intuitive way. By creating such applications with an intuitive and simple user interface we allow non-engineers like designers and architects to easily experiment with boundary conditions, design domains and other optimization settings. This is in contrast to commercial topology optimization...... software where the users are assumed to be well-educated both in the finite element method and topology optimization. This dissertation describes how various topology optimization methods have been used for creating cross-platform applications with high performance. The user interface design is based...
Integrated controls design optimization
Lou, Xinsheng; Neuschaefer, Carl H.
2015-09-01
A control system (207) for optimizing a chemical looping process of a power plant includes an optimizer (420), an income algorithm (230) and a cost algorithm (225) and a chemical looping process models. The process models are used to predict the process outputs from process input variables. Some of the process in puts and output variables are related to the income of the plant; and some others are related to the cost of the plant operations. The income algorithm (230) provides an income input to the optimizer (420) based on a plurality of input parameters (215) of the power plant. The cost algorithm (225) provides a cost input to the optimizer (420) based on a plurality of output parameters (220) of the power plant. The optimizer (420) determines an optimized operating parameter solution based on at least one of the income input and the cost input, and supplies the optimized operating parameter solution to the power plant.
Introduction to Continuous Optimization
DEFF Research Database (Denmark)
Andreasson, Niclas; Evgrafov, Anton; Patriksson, Michael
Optimization, or mathematical programming, is a fundamental subject within decision science and operations research, in which mathematical decision models are constructed, analyzed, and solved. The book’s focus lies on providing a basis for the analysis of optimization models and of candidate...... optimal solutions for continuous optimization models. The main part of the mathematical material therefore concerns the analysis and linear algebra that underlie the workings of convexity and duality, and necessary/sufficient local/global optimality conditions for continuous optimization problems. Natural...... algorithms are then developed from these optimality conditions, and their most important convergence characteristics are analyzed. The book answers many more questions of the form “Why?” and “Why not?” than “How?”. We use only elementary mathematics in the development of the book, yet are rigorous throughout...
Venter, Gerhard; Sobieszczanski-Sobieski Jaroslaw
2002-01-01
The purpose of this paper is to show how the search algorithm known as particle swarm optimization performs. Here, particle swarm optimization is applied to structural design problems, but the method has a much wider range of possible applications. The paper's new contributions are improvements to the particle swarm optimization algorithm and conclusions and recommendations as to the utility of the algorithm, Results of numerical experiments for both continuous and discrete applications are presented in the paper. The results indicate that the particle swarm optimization algorithm does locate the constrained minimum design in continuous applications with very good precision, albeit at a much higher computational cost than that of a typical gradient based optimizer. However, the true potential of particle swarm optimization is primarily in applications with discrete and/or discontinuous functions and variables. Additionally, particle swarm optimization has the potential of efficient computation with very large numbers of concurrently operating processors.
Benchmarking optimization solvers for structural topology optimization
DEFF Research Database (Denmark)
Rojas Labanda, Susana; Stolpe, Mathias
2015-01-01
sizes is developed for this benchmarking. The problems are based on a material interpolation scheme combined with a density filter. Different optimization solvers including Optimality Criteria (OC), the Method of Moving Asymptotes (MMA) and its globally convergent version GCMMA, the interior point...... solvers in IPOPT and FMINCON, and the sequential quadratic programming method in SNOPT, are benchmarked on the library using performance profiles. Whenever possible the methods are applied to both the nested and the Simultaneous Analysis and Design (SAND) formulations of the problem. The performance...... profiles conclude that general solvers are as efficient and reliable as classical structural topology optimization solvers. Moreover, the use of the exact Hessians in SAND formulations, generally produce designs with better objective function values. However, with the benchmarked implementations solving...
Supercomputer optimizations for stochastic optimal control applications
Chung, Siu-Leung; Hanson, Floyd B.; Xu, Huihuang
1991-01-01
Supercomputer optimizations for a computational method of solving stochastic, multibody, dynamic programming problems are presented. The computational method is valid for a general class of optimal control problems that are nonlinear, multibody dynamical systems, perturbed by general Markov noise in continuous time, i.e., nonsmooth Gaussian as well as jump Poisson random white noise. Optimization techniques for vector multiprocessors or vectorizing supercomputers include advanced data structures, loop restructuring, loop collapsing, blocking, and compiler directives. These advanced computing techniques and superconducting hardware help alleviate Bellman's curse of dimensionality in dynamic programming computations, by permitting the solution of large multibody problems. Possible applications include lumped flight dynamics models for uncertain environments, such as large scale and background random aerospace fluctuations.
Directory of Open Access Journals (Sweden)
N. Gnanasekaran
2016-06-01
Full Text Available Optimal size and location of shunt capacitors in the distribution system plays a significant role in minimizing the energy loss and the cost of reactive power compensation. This paper presents a new efficient technique to find optimal size and location of shunt capacitors with the objective of minimizing cost due to energy loss and reactive power compensation of distribution system. A new Shark Smell Optimization (SSO algorithm is proposed to solve the optimal capacitor placement problem satisfying the operating constraints. The SSO algorithm is a recently developed metaheuristic optimization algorithm conceptualized using the shark’s hunting ability. It uses a momentum incorporated gradient search and a rotational movement based local search for optimization. To demonstrate the applicability of proposed method, it is tested on IEEE 34-bus and 118-bus radial distribution systems. The simulation results obtained are compared with previous methods reported in the literature and found to be encouraging.
Zhou, Zhi; de Bedout, Juan Manuel; Kern, John Michael; Biyik, Emrah; Chandra, Ramu Sharat
2013-01-22
A system for optimizing customer utility usage in a utility network of customer sites, each having one or more utility devices, where customer site is communicated between each of the customer sites and an optimization server having software for optimizing customer utility usage over one or more networks, including private and public networks. A customer site model for each of the customer sites is generated based upon the customer site information, and the customer utility usage is optimized based upon the customer site information and the customer site model. The optimization server can be hosted by an external source or within the customer site. In addition, the optimization processing can be partitioned between the customer site and an external source.
Optimization aspects of carcinogenesis.
Brutovsky, B; Horvath, D
2010-05-01
Any process in which competing solutions replicate with errors and numbers of their copies depend on their respective fitnesses is the evolutionary optimization process. As during carcinogenesis mutated genomes replicate according to their respective qualities, carcinogenesis obviously qualifies as the evolutionary optimization process and conforms to common mathematical basis. The optimization view accents statistical nature of carcinogenesis proposing that during it the crucial role is actually played by the allocation of trials. Optimal allocation of trials requires reliable schemas' fitnesses estimations which necessitate appropriate, fitness landscape dependent, statistics of population. In the spirit of the applied conceptual framework, features which are known to decrease efficiency of any evolutionary optimization procedure (or inhibit it completely) are anticipated as "therapies" and reviewed. Strict adherence to the evolutionary optimization framework leads us to some counterintuitive implications which are, however, in agreement with recent experimental findings, such as sometimes observed more aggressive and malignant growth of therapy surviving cancer cells.
Workshop on Computational Optimization
2015-01-01
Our everyday life is unthinkable without optimization. We try to minimize our effort and to maximize the achieved profit. Many real world and industrial problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks. This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2013. It presents recent advances in computational optimization. The volume includes important real life problems like parameter settings for controlling processes in bioreactor, resource constrained project scheduling, problems arising in transport services, error correcting codes, optimal system performance and energy consumption and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others.
DEFF Research Database (Denmark)
Bligaard, Thomas; Johannesson, Gisli Holmar; Ruban, Andrei
2003-01-01
Large databases that can be used in the search for new materials with specific properties remain an elusive goal in materials science. The problem is complicated by the fact that the optimal material for a given application is usually a compromise between a number of materials properties and the ......, the Pareto-optimal set, to determine optimal alloy solutions for the compromise between low compressibility, high stability, and cost....
Dictionary descent in optimization
Temlyakov, Vladimir
2015-01-01
The problem of convex optimization is studied. Usually in convex optimization the minimization is over a d-dimensional domain. Very often the convergence rate of an optimization algorithm depends on the dimension d. The algorithms studied in this paper utilize dictionaries instead of a canonical basis used in the coordinate descent algorithms. We show how this approach allows us to reduce dimensionality of the problem. Also, we investigate which properties of a dictionary are beneficial for t...
Optimization Aspects of Carcinogenesis
Brutovsky, B.; Horvath, D.
2009-01-01
Any process in which competing solutions replicate with errors and numbers of their copies depend on their respective fitnesses is the evolutionary optimization process. As during carcinogenesis mutated genomes replicate according to their respective qualities, carcinogenesis obviously qualifies as the evolutionary optimization process and conforms to common mathematical basis. The optimization view accents statistical nature of carcinogenesis proposing that during it the crucial role is actu...
PROKOPOVÁ, Nikola
2017-01-01
The subject of this thesis is optimization of inventory in selected organization. Inventory optimization is a very important topic in each organization because it reduces storage costs. At the beginning the inventory theory is presented. It shows the meaning and types of inventory, inventory control and also different methods and models of inventory control. Inventory optimization in the enterprise can be reached by using models of inventory control. In the second part the company on which is...
POSTDOC : THE HUMAN OPTIMIZATION
Satish Gajawada
2013-01-01
This paper is dedicated to everyone who is interested in the Artificial Intelligence. John Henry Holland proposed Genetic Algorithm in the early 1970s. Ant Colony Optimization was proposed by Marco Dorigo in 1992. Particle Swarm Optimization was introduced by Kennedy and Eberhart in 1995. Storn and Price introduced Differential Evolution in 1996. K.M. Passino introduced Bacterial Foraging Optimization Algorithm in 2002. In 2003, X.L. Li proposed Artificial Fish Swarm Algorithm....
Optimization and approximation
Pedregal, Pablo
2017-01-01
This book provides a basic, initial resource, introducing science and engineering students to the field of optimization. It covers three main areas: mathematical programming, calculus of variations and optimal control, highlighting the ideas and concepts and offering insights into the importance of optimality conditions in each area. It also systematically presents affordable approximation methods. Exercises at various levels have been included to support the learning process.
Nuclear Fuel Management Optimization
Energy Technology Data Exchange (ETDEWEB)
Karve, A.A.; Keller, P.M.; Turinsky, P.J.; Maldonado, G.I.
2001-06-17
The nuclear fuel management design optimization problem has grown more challenging and important with the passage of time. In this paper, we summarize our research on this design optimization problem. A suite of computer codes that aid in making nuclear fuel management decisions has been developed. These codes utilize stochastic optimization techniques to search the decision space for determining the family of near-optimum decisions in the suboptimization problem being solved.
Optimization of Freight Procurement.
Ndahi Mubiri, Gabriel
2016-01-01
Freight and logistics industries have seen a significant growth over the last decade, and this growth requires better and more optimized solutions. The present study aimed at examining strategies that could be used in the optimization of the procurement at Jomo Kenyatta International Airport. The study aimed at presenting an effective framework for addressing the challenges in procurement and optimizing the performance of the department. This was hoped to result in an effective perfor...
Optimal firm growth under the threat of entry
Kort, Peter M.; Wrzaczek, Stefan
2015-01-01
The paper studies the incumbent-entrant problem in a fully dynamic setting. We find that under an open-loop information structure the incumbent anticipates entry by overinvesting, whereas in the Markov perfect equilibrium the incumbent slightly underinvests in the period before the entry. The entry cost level where entry accommodation passes into entry deterrence is lower in the Markov perfect equilibrium. Further we find that the incumbent’s capital stock level needed to deter entry is hump shaped as a function of the entry time, whereas the corresponding entry cost, where the entrant is indifferent between entry and non-entry, is U-shaped. PMID:26435573
Optimal firm growth under the threat of entry.
Kort, Peter M; Wrzaczek, Stefan
2015-10-01
The paper studies the incumbent-entrant problem in a fully dynamic setting. We find that under an open-loop information structure the incumbent anticipates entry by overinvesting, whereas in the Markov perfect equilibrium the incumbent slightly underinvests in the period before the entry. The entry cost level where entry accommodation passes into entry deterrence is lower in the Markov perfect equilibrium. Further we find that the incumbent's capital stock level needed to deter entry is hump shaped as a function of the entry time, whereas the corresponding entry cost, where the entrant is indifferent between entry and non-entry, is U-shaped.
Sequential stochastic optimization
Cairoli, Renzo
1996-01-01
Sequential Stochastic Optimization provides mathematicians and applied researchers with a well-developed framework in which stochastic optimization problems can be formulated and solved. Offering much material that is either new or has never before appeared in book form, it lucidly presents a unified theory of optimal stopping and optimal sequential control of stochastic processes. This book has been carefully organized so that little prior knowledge of the subject is assumed; its only prerequisites are a standard graduate course in probability theory and some familiarity with discrete-paramet
Deterministic Global Optimization
Scholz, Daniel
2012-01-01
This monograph deals with a general class of solution approaches in deterministic global optimization, namely the geometric branch-and-bound methods which are popular algorithms, for instance, in Lipschitzian optimization, d.c. programming, and interval analysis.It also introduces a new concept for the rate of convergence and analyzes several bounding operations reported in the literature, from the theoretical as well as from the empirical point of view. Furthermore, extensions of the prototype algorithm for multicriteria global optimization problems as well as mixed combinatorial optimization
Integer and combinatorial optimization
Nemhauser, George L
1999-01-01
Rave reviews for INTEGER AND COMBINATORIAL OPTIMIZATION ""This book provides an excellent introduction and survey of traditional fields of combinatorial optimization . . . It is indeed one of the best and most complete texts on combinatorial optimization . . . available. [And] with more than 700 entries, [it] has quite an exhaustive reference list.""-Optima ""A unifying approach to optimization problems is to formulate them like linear programming problems, while restricting some or all of the variables to the integers. This book is an encyclopedic resource for such f
Stochastic optimization methods
Marti, Kurt
2008-01-01
Optimization problems arising in practice involve random model parameters. This book features many illustrations, several examples, and applications to concrete problems from engineering and operations research.
Optimization : insights and applications
Brinkhuis, Jan
2005-01-01
This self-contained textbook is an informal introduction to optimization through the use of numerous illustrations and applications. The focus is on analytically solving optimization problems with a finite number of continuous variables. In addition, the authors provide introductions to classical and modern numerical methods of optimization and to dynamic optimization. The book's overarching point is that most problems may be solved by the direct application of the theorems of Fermat, Lagrange, and Weierstrass. The authors show how the intuition for each of the theoretical results can be s
Control and optimization system
Xinsheng, Lou
2013-02-12
A system for optimizing a power plant includes a chemical loop having an input for receiving an input parameter (270) and an output for outputting an output parameter (280), a control system operably connected to the chemical loop and having a multiple controller part (230) comprising a model-free controller. The control system receives the output parameter (280), optimizes the input parameter (270) based on the received output parameter (280), and outputs an optimized input parameter (270) to the input of the chemical loop to control a process of the chemical loop in an optimized manner.
Optimization under Uncertainty
Lopez, Rafael H.
2016-01-06
The goal of this poster is to present the main approaches to optimization of engineering systems in the presence of uncertainties. We begin by giving an insight about robust optimization. Next, we detail how to deal with probabilistic constraints in optimization, the so called the reliability based design. Subsequently, we present the risk optimization approach, which includes the expected costs of failure in the objective function. After that the basic description of each approach is given, the projects developed by CORE are presented. Finally, the main current topic of research of CORE is described.
Optimization of surface maintenance
International Nuclear Information System (INIS)
Oeverland, E.
1990-01-01
The present conference paper deals with methods of optimizing the surface maintenance of steel-made offshore installations. The paper aims at identifying important approaches to the problems regarding the long-range planning of an economical and cost effective maintenance program. The methods of optimization are based on the obtained experiences from the maintenance of installations on the Norwegian continental shelf. 3 figs
Natural selection and optimality
International Nuclear Information System (INIS)
Torres, J.L.
1989-01-01
It is assumed that Darwin's principle translates into optimal regimes of operation along metabolical pathways in an ecological system. Fitness is then defined in terms of the distance of a given individual's thermodynamic parameters from their optimal values. The method is illustrated testing maximum power as a criterion of merit satisfied in ATP synthesis. (author). 26 refs, 2 figs
Numerical Optimization in Microfluidics
DEFF Research Database (Denmark)
Jensen, Kristian Ejlebjærg
2017-01-01
Numerical modelling can illuminate the working mechanism and limitations of microfluidic devices. Such insights are useful in their own right, but one can take advantage of numerical modelling in a systematic way using numerical optimization. In this chapter we will discuss when and how numerical...... optimization is best used....
Lattimore, Tor; Hutter, Marcus
2011-01-01
Artificial general intelligence aims to create agents capable of learning to solve arbitrary interesting problems. We define two versions of asymptotic optimality and prove that no agent can satisfy the strong version while in some cases, depending on discounting, there does exist a non-computable weak asymptotically optimal agent.
Energy Technology Data Exchange (ETDEWEB)
Costa, Geraldo R.M. da [Sao Paulo Univ., Sao Carlos, SP (Brazil). Escola de Engenharia
1994-12-31
This paper discusses, partially, the advantages and the disadvantages of the optimal power flow. It shows some of the difficulties of implementation and proposes solutions. An analysis is made comparing the power flow, BIGPOWER/CESP, and the optimal power flow, FPO/SEL, developed by the author, when applied to the CEPEL-ELETRONORTE and CESP systems. (author) 8 refs., 5 tabs.
DEFF Research Database (Denmark)
Dalgaard, Carl-Johan Lars; Strulik, Holger
2010-01-01
This study introduces physiological aging into a simple model of optimal intertemporal consumption. In this endeavor we draw on the natural science literature on aging. According to the purposed theory, the speed of the aging process and the time of death are endogenously determined by optimal...
Maintenance optimization with AREVA
Energy Technology Data Exchange (ETDEWEB)
Kostroun, Frank; Herzing, Karl-Heinz; Buschart, Rufus [AREVA NP GmbH, Erlangen (Germany)
2009-04-15
Driven by the economic expectations of an energy market that becomes increasingly unregulated, the optimization of the maintenance in a nuclear power plant is a more demand practice. This paper describes on three exemplary product lines of AREVA, how AREVA can support its customers optimizing its maintenance.
OPTIMIZING HOTEL DYNAMIC PRICES
Directory of Open Access Journals (Sweden)
A. M. Bandalouski
2016-01-01
Full Text Available An approach to solvе a problem of determining optimal dynamic prices for hotel rooms is suggested. It includes selection of input parameters for the succeeding mathematical analysis, disaggregation of the demand into several categories, demand forecasting, simulation of demand- price relations, and a mathematical programming model for price optimization.
Workshop on Computational Optimization
2016-01-01
This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2014, held at Warsaw, Poland, September 7-10, 2014. The book presents recent advances in computational optimization. The volume includes important real problems like parameter settings for controlling processes in bioreactor and other processes, resource constrained project scheduling, infection distribution, molecule distance geometry, quantum computing, real-time management and optimal control, bin packing, medical image processing, localization the abrupt atmospheric contamination source and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others. This research demonstrates how some real-world problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks.
System performance optimization
International Nuclear Information System (INIS)
Bednarz, R.J.
1978-01-01
The System Performance Optimization has become an important and difficult field for large scientific computer centres. Important because the centres must satisfy increasing user demands at the lowest possible cost. Difficult because the System Performance Optimization requires a deep understanding of hardware, software and workload. The optimization is a dynamic process depending on the changes in hardware configuration, current level of the operating system and user generated workload. With the increasing complication of the computer system and software, the field for the optimization manoeuvres broadens. The hardware of two manufacturers IBM and CDC is discussed. Four IBM and two CDC operating systems are described. The description concentrates on the organization of the operating systems, the job scheduling and I/O handling. The performance definitions, workload specification and tools for the system stimulation are given. The measurement tools for the System Performance Optimization are described. The results of the measurement and various methods used for the operating system tuning are discussed. (Auth.)
Cortez, Paulo
2014-01-01
The goal of this book is to gather in a single document the most relevant concepts related to modern optimization methods, showing how such concepts and methods can be addressed using the open source, multi-platform R tool. Modern optimization methods, also known as metaheuristics, are particularly useful for solving complex problems for which no specialized optimization algorithm has been developed. These methods often yield high quality solutions with a more reasonable use of computational resources (e.g. memory and processing effort). Examples of popular modern methods discussed in this book are: simulated annealing; tabu search; genetic algorithms; differential evolution; and particle swarm optimization. This book is suitable for undergraduate and graduate students in Computer Science, Information Technology, and related areas, as well as data analysts interested in exploring modern optimization methods using R.
Overall bolt stress optimization
DEFF Research Database (Denmark)
Pedersen, Niels Leergaard
2013-01-01
The state of stress in bolts and nuts with International Organization for Standardization metric thread design is examined and optimized. The assumed failure mode is fatigue, so the applied preload and the load amplitude together with the stress concentrations define the connection strength....... Maximum stress in the bolt is found at the fillet under the head, at the thread start, or at the thread root. To minimize the stress concentration, shape optimization is applied. Nut shape optimization also has a positive effect on the maximum stress. The optimization results show that designing a nut......, which results in a more evenly distribution of load along the engaged thread, has a limited influence on the maximum stress due to the stress concentration at the first thread root. To further reduce the maximum stress, the transition from bolt shank to the thread must be optimized. Stress reduction...
An optimal PID controller via LQR for standard second order plus time delay systems.
Srivastava, Saurabh; Misra, Anuraag; Thakur, S K; Pandit, V S
2016-01-01
An improved tuning methodology of PID controller for standard second order plus time delay systems (SOPTD) is developed using the approach of Linear Quadratic Regulator (LQR) and pole placement technique to obtain the desired performance measures. The pole placement method together with LQR is ingeniously used for SOPTD systems where the time delay part is handled in the controller output equation instead of characteristic equation. The effectiveness of the proposed methodology has been demonstrated via simulation of stable open loop oscillatory, over damped, critical damped and unstable open loop systems. Results show improved closed loop time response over the existing LQR based PI/PID tuning methods with less control effort. The effect of non-dominant pole on the stability and robustness of the controller has also been discussed. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.
Eberhard, Andrew; Ralph, Daniel; Glover, Barney M
1999-01-01
Although the monograph Progress in Optimization I: Contributions from Aus tralasia grew from the idea of publishing a proceedings of the Fourth Optimiza tion Day, held in July 1997 at the Royal Melbourne Institute of Technology, the focus soon changed to a refereed volume in optimization. The intention is to publish a similar book annually, following each Optimization Day. The idea of having an annual Optimization Day was conceived by Barney Glover; the first of these Optimization Days was held in 1994 at the University of Ballarat. Barney hoped that such a yearly event would bring together the many, but widely dispersed, researchers in Australia who were publishing in optimization and related areas such as control. The first Optimization Day event was followed by similar conferences at The University of New South Wales (1995), The University of Melbourne (1996), the Royal Melbourne Institute of Technology (1997), and The University of Western Australia (1998). The 1999 conference will return to Ballarat ...
Pardalos, Panos
2001-01-01
Optimization problems are widespread in the mathematical modeling of real world systems and their applications arise in all branches of science, applied science and engineering. The goal of the Encyclopedia of Optimization is to introduce the reader to a complete set of topics in order to show the spectrum of recent research activities and the richness of ideas in the development of theories, algorithms and the applications of optimization. It is directed to a diverse audience of students, scientists, engineers, decision makers and problem solvers in academia, business, industry, and government.
Jefferson, Anneli; Bortolotti, Lisa; Kuzmanovic, Bojana
2017-04-01
Here we consider the nature of unrealistic optimism and other related positive illusions. We are interested in whether cognitive states that are unrealistically optimistic are belief states, whether they are false, and whether they are epistemically irrational. We also ask to what extent unrealistically optimistic cognitive states are fixed. Based on the classic and recent empirical literature on unrealistic optimism, we offer some preliminary answers to these questions, thereby laying the foundations for answering further questions about unrealistic optimism, such as whether it has biological, psychological, or epistemic benefits. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.
Jędrzejowicz, Piotr; Kacprzyk, Janusz
2013-01-01
This volume presents a collection of original research works by leading specialists focusing on novel and promising approaches in which the multi-agent system paradigm is used to support, enhance or replace traditional approaches to solving difficult optimization problems. The editors have invited several well-known specialists to present their solutions, tools, and models falling under the common denominator of the agent-based optimization. The book consists of eight chapters covering examples of application of the multi-agent paradigm and respective customized tools to solve difficult optimization problems arising in different areas such as machine learning, scheduling, transportation and, more generally, distributed and cooperative problem solving.
Optimization of Antivirus Software
Directory of Open Access Journals (Sweden)
2007-01-01
Full Text Available The paper describes the main techniques used in development of computer antivirus software applications. For this particular category of software, are identified and defined optimum criteria that helps determine which solution is better and what are the objectives of the optimization process. From the general viewpoint of software optimization are presented methods and techniques that are applied at code development level. Regarding the particularities of antivirus software, the paper analyzes some of the optimization concepts applied to this category of applications
Optimization of photonic crystal cavities
DEFF Research Database (Denmark)
Wang, Fengwen; Sigmund, Ole
2017-01-01
We present optimization of photonic crystal cavities. The optimization problem is formulated to maximize the Purcell factor of a photonic crystal cavity. Both topology optimization and air-hole-based shape optimization are utilized for the design process. Numerical results demonstrate...... that the Purcell factor of the photonic crystal cavity can be significantly improved through optimization....
Evolution strategies for robust optimization
Kruisselbrink, Johannes Willem
2012-01-01
Real-world (black-box) optimization problems often involve various types of uncertainties and noise emerging in different parts of the optimization problem. When this is not accounted for, optimization may fail or may yield solutions that are optimal in the classical strict notion of optimality, but
Robust Optimization of Database Queries
Indian Academy of Sciences (India)
JAYANT
2011-07-06
Jul 6, 2011 ... join order [ ((S R) C) or ((R C) S) ? ] join techniques [ Nested-Loops or Sort-Merge or Hash ? ] ○ DBMS query optimizer identifies the optimal. ○ DBMS query optimizer identifies the optimal evaluation strategy: “query execution plan”. July 2011. Robust Query Optimization (IASc Mid-year Meeting). 6 ...
Dynamic stochastic optimization
Ermoliev, Yuri; Pflug, Georg
2004-01-01
Uncertainties and changes are pervasive characteristics of modern systems involving interactions between humans, economics, nature and technology. These systems are often too complex to allow for precise evaluations and, as a result, the lack of proper management (control) may create significant risks. In order to develop robust strategies we need approaches which explic itly deal with uncertainties, risks and changing conditions. One rather general approach is to characterize (explicitly or implicitly) uncertainties by objec tive or subjective probabilities (measures of confidence or belief). This leads us to stochastic optimization problems which can rarely be solved by using the standard deterministic optimization and optimal control methods. In the stochastic optimization the accent is on problems with a large number of deci sion and random variables, and consequently the focus ofattention is directed to efficient solution procedures rather than to (analytical) closed-form solu tions. Objective an...
Handbook of simulation optimization
Fu, Michael C
2014-01-01
The Handbook of Simulation Optimization presents an overview of the state of the art of simulation optimization, providing a survey of the most well-established approaches for optimizing stochastic simulation models and a sampling of recent research advances in theory and methodology. Leading contributors cover such topics as discrete optimization via simulation, ranking and selection, efficient simulation budget allocation, random search methods, response surface methodology, stochastic gradient estimation, stochastic approximation, sample average approximation, stochastic constraints, variance reduction techniques, model-based stochastic search methods and Markov decision processes. This single volume should serve as a reference for those already in the field and as a means for those new to the field for understanding and applying the main approaches. The intended audience includes researchers, practitioners and graduate students in the business/engineering fields of operations research, management science,...
Stochastic and global optimization
National Research Council Canada - National Science Library
Dzemyda, Gintautas; Šaltenis, Vydūnas; Zhilinskas, A; Mockus, Jonas
2002-01-01
... and Effectiveness of Controlled Random Search E. M. T. Hendrix, P. M. Ortigosa and I. García 129 9. Discrete Backtracking Adaptive Search for Global Optimization B. P. Kristinsdottir, Z. B. Zabinsky and...
Optimization in liner shipping
DEFF Research Database (Denmark)
Brouer, Berit Dangaard; Karsten, Christian Vad; Pisinger, David
2017-01-01
Seaborne trade is the lynchpin in almost every international supply chain, and about 90% of non-bulk cargo worldwide is transported by container. In this survey we give an overview of data-driven optimization problems in liner shipping. Research in liner shipping is motivated by a need for handling...... still more complex decision problems, based on big data sets and going across several organizational entities. Moreover, liner shipping optimization problems are pushing the limits of optimization methods, creating a new breeding ground for advanced modelling and solution methods. Starting from liner...... shipping network design, we consider the problem of container routing and speed optimization. Next, we consider empty container repositioning and stowage planning as well as disruption management. In addition, the problem of bunker purchasing is considered in depth. In each section we give a clear problem...
Topology optimized microbioreactors
DEFF Research Database (Denmark)
Schäpper, Daniel; Lencastre Fernandes, Rita; Eliasson Lantz, Anna
2011-01-01
This article presents the fusion of two hitherto unrelated fields—microbioreactors and topology optimization. The basis for this study is a rectangular microbioreactor with homogeneously distributed immobilized brewers yeast cells (Saccharomyces cerevisiae) that produce a recombinant protein....... Topology optimization is then used to change the spatial distribution of cells in the reactor in order to optimize for maximal product flow out of the reactor. This distribution accounts for potentially negative effects of, for example, by-product inhibition. We show that the theoretical improvement...... in productivity is at least fivefold compared with the homogeneous reactor. The improvements obtained by applying topology optimization are largest where either nutrition is scarce or inhibition effects are pronounced....
2016-01-01
Route optimization is a method of creating a set of winter highway treatment routes to meet a range of targets, including : service level improvements, resource reallocation and changes to overriding constraints. These routes will allow the : operato...
International Nuclear Information System (INIS)
Ishida, Masamitsu
1993-01-01
The conventional screen/film system combines sensor, display and storage functions all together in one unit, which makes it difficult to optimize these functions separately. With the computed radiography (CR) system, on the other hand, these three functions are separated from each other into units, so that individual functions can be readily optimized by digital image processing techniques. The basic principle of CR system is to produce images optimized for various kinds of diagnosis consistently. The image processing is performed to automatically normalize digital image data so that consistent image total density and contrast is always ensured irrespective of variations in X-ray dose and energy. The image processing optimized for each set of exposure menus is performed, i.e., gradation processing, frequency processing, and dynamic range control processing. Finally, the relationships between patient dose and the image quality of CR system are described. (author)
National Aeronautics and Space Administration — The main goal of my research is to develop, implement, verify, and validate an optimal numerical predictor-corrector aerocapture guidance algorithm that is...
National Aeronautics and Space Administration — Computationally-efficient, fast and real-time, and provably-optimal motion planner for systems with highly nonlinear dynamics that can be extended for cooperative...
Nuclear Energy Density Optimization
Energy Technology Data Exchange (ETDEWEB)
Kortelainen, Erno M [ORNL; Lesinski, Thomas [ORNL; More, J. [Argonne National Laboratory (ANL); Nazarewicz, W. [University of Tennessee, Knoxville (UTK) & Oak Ridge National Laboratory (ORNL); Sarich, J. [Argonne National Laboratory (ANL); Schunck, N. [University of Tennessee, Knoxville (UTK) & Oak Ridge National Laboratory (ORNL); Stoitsov, M. V. [University of Tennessee, Knoxville (UTK) & Oak Ridge National Laboratory (ORNL); Wild, S. [Argonne National Laboratory (ANL)
2010-01-01
We carry out state-of-the-art optimization of a nuclear energy density of Skyrme type in the framework of the Hartree-Fock-Bogoliubov (HFB) theory. The particle-hole and particle-particle channels are optimized simultaneously, and the experimental data set includes both spherical and deformed nuclei. The new model-based, derivative-free optimization algorithm used in this work has been found to be significantly better than standard optimization methods in terms of reliability, speed, accuracy, and precision. The resulting parameter set UNEDFpre results in good agreement with experimental masses, radii, and deformations and seems to be free of finite-size instabilities. An estimate of the reliability of the obtained parameterization is given, based on standard statistical methods. We discuss new physics insights offered by the advanced covariance analysis.
Optimal exploration target zones
CSIR Research Space (South Africa)
Debba, Pravesh
2008-09-01
Full Text Available This research describes a quantitative methodology for deriving optimal exploration target zones based on a probabilistic mineral prospectivity map. In order to arrive at out objective, we provide a plausible answer to the following question: "Which...
Stochastic optimization methods
Marti, Kurt
2005-01-01
Optimization problems arising in practice involve random parameters. For the computation of robust optimal solutions, i.e., optimal solutions being insensitive with respect to random parameter variations, deterministic substitute problems are needed. Based on the distribution of the random data, and using decision theoretical concepts, optimization problems under stochastic uncertainty are converted into deterministic substitute problems. Due to the occurring probabilities and expectations, approximative solution techniques must be applied. Deterministic and stochastic approximation methods and their analytical properties are provided: Taylor expansion, regression and response surface methods, probability inequalities, First Order Reliability Methods, convex approximation/deterministic descent directions/efficient points, stochastic approximation methods, differentiation of probability and mean value functions. Convergence results of the resulting iterative solution procedures are given.
Bolt Thread Stress Optimization
DEFF Research Database (Denmark)
Pedersen, Niels Leergaard
2012-01-01
Designs of threaded fasteners are controlled by different standards, and the number of different thread definitions is large. The most commonly used thread is probably the metric ISO thread, and this design is therefore used in this paper. Thread root design controls the stress concentration factor...... of threads and therefore indirectly the bolt fatigue life. The root shape is circular, and from shape optimization for minimum stress concentration it is well known that the circular shape is seldom optimal. An axisymmetric Finite Element (FE) formulation is used to analyze the bolted connection, and a study...... is performed to establish the need for contact modeling with regard to finding the correct stress concentration factor. Optimization is performed with a simple parameterization with two design variables. Stress reduction of up to 9% is found in the optimization process, and some similarities are found...
Sinha, B K; Pal, Manisha; Das, P
2014-01-01
The book dwells mainly on the optimality aspects of mixture designs. As mixture models are a special case of regression models, a general discussion on regression designs has been presented, which includes topics like continuous designs, de la Garza phenomenon, Loewner order domination, Equivalence theorems for different optimality criteria and standard optimality results for single variable polynomial regression and multivariate linear and quadratic regression models. This is followed by a review of the available literature on estimation of parameters in mixture models. Based on recent research findings, the volume also introduces optimal mixture designs for estimation of optimum mixing proportions in different mixture models, which include Scheffé’s quadratic model, Darroch-Waller model, log- contrast model, mixture-amount models, random coefficient models and multi-response model. Robust mixture designs and mixture designs in blocks have been also reviewed. Moreover, some applications of mixture desig...
Optimization Library for Interactive Multi-Criteria Optimization Tasks
Pfeiffer, Andreas
2012-01-01
The commercial library Optimization 2.1 for interactive multi-criteria optimization tasks has been released along with Dymola 2013. The library offers several numerical optimization algorithms for solving different kinds of optimization tasks. User defined Modelica functions or models provide the basis for an interactive optimization process where the user keeps overview of complex multi-criteria optimization tasks that can take discrete parameters, several model operating points or trajector...
Optimal Responsible Investment
DEFF Research Database (Denmark)
Jessen, Pernille
The paper studies retail Socially Responsible Investment and portfolio allocation. It extends conventional portfolio theory by allowing for a personal value based investment decision. When preferences for responsibility enter the framework for mean-variance analysis, it yields an optimal...... responsible investment model. An example of index investing illustrates the theory. Results show that it is crucial for the responsible investor to consider portfolio risk, expected return, and responsibility simultaneously in order to obtain an optimal portfolio. The model enables responsible investors...
Jefferson, Anneli; Bortolotti, Lisa; Kuzmanovic, Bojana
2017-01-01
Here we consider the nature of unrealistic optimism and other related positive illusions. We are interested in whether cognitive states that are unrealistically optimistic are belief states, whether they are false, and whether they are epistemically irrational. We also ask to what extent unrealistically optimistic cognitive states are fixed. Based on the classic and recent empirical literature on unrealistic optimism, we offer some preliminary answers to these questions, thereby laying the fo...
Multidisciplinary Free Material Optimization
Czech Academy of Sciences Publication Activity Database
Haslinger, J.; Kočvara, Michal; Leugering, G.; Stingl, M.
2010-01-01
Roč. 7, č. 70 (2010), s. 2709-2728 ISSN 0036-1399 R&D Projects: GA AV ČR IAA100750802 Grant - others:EU FP6(XE) 30717 Institutional research plan: CEZ:AV0Z10750506 Keywords : structural optimization * material optimization * H-convergence * semidefinite programming Subject RIV: BA - General Mathematics Impact factor: 1.529, year: 2010 http://library.utia.cas.cz/separaty/2013/MTR/kocvara-0421361.pdf
Guided randomness in optimization
Clerc, Maurice
2015-01-01
The performance of an algorithm used depends on the GNA. This book focuses on the comparison of optimizers, it defines a stress-outcome approach which can be derived all the classic criteria (median, average, etc.) and other more sophisticated. Source-codes used for the examples are also presented, this allows a reflection on the ""superfluous chance,"" succinctly explaining why and how the stochastic aspect of optimization could be avoided in some cases.
DEFF Research Database (Denmark)
Pedersen, Niels Leergaard
2013-01-01
The state of stress in bolts and nuts with ISO metric thread design is examined and optimized. The assumed failure mode is fatigue so the applied preload and the load amplitude together with the stress concentrations define the connection strength. Maximum stress in the bolt is found at, the fillet...... under the head, at the thread start or at the thread root. To minimize the stress concentration shape optimization is applied....
Optimization and anti-optimization of structures under uncertainty
National Research Council Canada - National Science Library
Elishakoff, Isaac; Ohsaki, Makoto
2010-01-01
The volume presents a collaboration between internationally recognized experts on anti-optimization and structural optimization, and summarizes various novel ideas, methodologies and results studied over 20 years...
Regularizing portfolio optimization
International Nuclear Information System (INIS)
Still, Susanne; Kondor, Imre
2010-01-01
The optimization of large portfolios displays an inherent instability due to estimation error. This poses a fundamental problem, because solutions that are not stable under sample fluctuations may look optimal for a given sample, but are, in effect, very far from optimal with respect to the average risk. In this paper, we approach the problem from the point of view of statistical learning theory. The occurrence of the instability is intimately related to over-fitting, which can be avoided using known regularization methods. We show how regularized portfolio optimization with the expected shortfall as a risk measure is related to support vector regression. The budget constraint dictates a modification. We present the resulting optimization problem and discuss the solution. The L2 norm of the weight vector is used as a regularizer, which corresponds to a diversification 'pressure'. This means that diversification, besides counteracting downward fluctuations in some assets by upward fluctuations in others, is also crucial because it improves the stability of the solution. The approach we provide here allows for the simultaneous treatment of optimization and diversification in one framework that enables the investor to trade off between the two, depending on the size of the available dataset.
Regularizing portfolio optimization
Still, Susanne; Kondor, Imre
2010-07-01
The optimization of large portfolios displays an inherent instability due to estimation error. This poses a fundamental problem, because solutions that are not stable under sample fluctuations may look optimal for a given sample, but are, in effect, very far from optimal with respect to the average risk. In this paper, we approach the problem from the point of view of statistical learning theory. The occurrence of the instability is intimately related to over-fitting, which can be avoided using known regularization methods. We show how regularized portfolio optimization with the expected shortfall as a risk measure is related to support vector regression. The budget constraint dictates a modification. We present the resulting optimization problem and discuss the solution. The L2 norm of the weight vector is used as a regularizer, which corresponds to a diversification 'pressure'. This means that diversification, besides counteracting downward fluctuations in some assets by upward fluctuations in others, is also crucial because it improves the stability of the solution. The approach we provide here allows for the simultaneous treatment of optimization and diversification in one framework that enables the investor to trade off between the two, depending on the size of the available dataset.
Learning optimal embedded cascades.
Saberian, Mohammad Javad; Vasconcelos, Nuno
2012-10-01
The problem of automatic and optimal design of embedded object detector cascades is considered. Two main challenges are identified: optimization of the cascade configuration and optimization of individual cascade stages, so as to achieve the best tradeoff between classification accuracy and speed, under a detection rate constraint. Two novel boosting algorithms are proposed to address these problems. The first, RCBoost, formulates boosting as a constrained optimization problem which is solved with a barrier penalty method. The constraint is the target detection rate, which is met at all iterations of the boosting process. This enables the design of embedded cascades of known configuration without extensive cross validation or heuristics. The second, ECBoost, searches over cascade configurations to achieve the optimal tradeoff between classification risk and speed. The two algorithms are combined into an overall boosting procedure, RCECBoost, which optimizes both the cascade configuration and its stages under a detection rate constraint, in a fully automated manner. Extensive experiments in face, car, pedestrian, and panda detection show that the resulting detectors achieve an accuracy versus speed tradeoff superior to those of previous methods.
Totally optimal decision rules
Amin, Talha
2017-11-22
Optimality of decision rules (patterns) can be measured in many ways. One of these is referred to as length. Length signifies the number of terms in a decision rule and is optimally minimized. Another, coverage represents the width of a rule’s applicability and generality. As such, it is desirable to maximize coverage. A totally optimal decision rule is a decision rule that has the minimum possible length and the maximum possible coverage. This paper presents a method for determining the presence of totally optimal decision rules for “complete” decision tables (representations of total functions in which different variables can have domains of differing values). Depending on the cardinalities of the domains, we can either guarantee for each tuple of values of the function that totally optimal rules exist for each row of the table (as in the case of total Boolean functions where the cardinalities are equal to 2) or, for each row, we can find a tuple of values of the function for which totally optimal rules do not exist for this row.
Mees, Alistair; Fisher, Mike; Jennings, Les
2000-01-01
'Optimization Day' (OD) has been a series of annual mini-conferences in Australia since 1994. The purpose of this series of events is to gather researchers in optimization and its related areas from Australia and their collaborators, in order to exchange new developments of optimization theories, methods and their applications. The first four OD mini-conferences were held in The Uni versity of Ballarat (1994), The University of New South Wales (1995), The University of Melbourne (1996) and Royal Melbourne Institute of Technology (1997), respectively. They were all on the eastern coast of Australia. The fifth mini-conference Optimization Days was held at the Centre for Ap plied Dynamics and Optimization (CADO), Department of Mathematics and Statistics, The University of Western Australia, Perth, from 29 to 30 June 1998. This is the first time the OD mini-conference has been held at the west ern coast of Australia. This fifth OD preceded the International Conference on Optimization: Techniques and Applica...
Handbook of optimization in telecommunications
Pardalos, Panos M
2008-01-01
Covers the field of optimization in telecommunications, and the optimization developments that are frequently applied to telecommunications. This book aims to provide a reference tool for scientists and engineers in telecommunications who depend upon optimization.
On Symmetries in Optimal Control
Schaft, A.J. van der
1986-01-01
We discuss the use of symmetries in solving optimal control problems. In particular a procedure for obtaining symmetries is given which can be performed before the actual calculation of the optimal control and optimal Hamiltonian.
Optimization of Metronidazole Emulgel
Directory of Open Access Journals (Sweden)
Monica Rao
2013-01-01
Full Text Available The purpose of the present study was to develop and optimize the emulgel system for MTZ (Metronidazole, a poorly water soluble drug. The pseudoternary phase diagrams were developed for various microemulsion formulations composed of Capmul 908 P, Acconon MC8-2, and propylene glycol. The emulgel was optimized using a three-factor, two-level factorial design, the independent variables selected were Capmul 908 P, and surfactant mixture (Acconon MC8-2 and gelling agent, and the dependent variables (responses were a cumulative amount of drug permeated across the dialysis membrane in 24 h ( and spreadability (. Mathematical equations and response surface plots were used to relate the dependent and independent variables. The regression equations were generated for responses and . The statistical validity of the polynomials was established, and optimized formulation factors were selected. Validation of the optimization study with 3 confirmatory runs indicated a high degree of prognostic ability of response surface methodology. Emulgel system of MTZ was developed and optimized using 23 factorial design and could provide an effective treatment against topical infections.
Optimization of Heat Exchangers
International Nuclear Information System (INIS)
Catton, Ivan
2010-01-01
The objective of this research is to develop tools to design and optimize heat exchangers (HE) and compact heat exchangers (CHE) for intermediate loop heat transport systems found in the very high temperature reator (VHTR) and other Generation IV designs by addressing heat transfer surface augmentation and conjugate modeling. To optimize heat exchanger, a fast running model must be created that will allow for multiple designs to be compared quickly. To model a heat exchanger, volume averaging theory, VAT, is used. VAT allows for the conservation of mass, momentum and energy to be solved for point by point in a 3 dimensional computer model of a heat exchanger. The end product of this project is a computer code that can predict an optimal configuration for a heat exchanger given only a few constraints (input fluids, size, cost, etc.). As VAT computer code can be used to model characteristics (pumping power, temperatures, and cost) of heat exchangers more quickly than traditional CFD or experiment, optimization of every geometric parameter simultaneously can be made. Using design of experiment, DOE and genetric algorithms, GE, to optimize the results of the computer code will improve heat exchanger design.
Optimization of Heat Exchangers
Energy Technology Data Exchange (ETDEWEB)
Ivan Catton
2010-10-01
The objective of this research is to develop tools to design and optimize heat exchangers (HE) and compact heat exchangers (CHE) for intermediate loop heat transport systems found in the very high temperature reator (VHTR) and other Generation IV designs by addressing heat transfer surface augmentation and conjugate modeling. To optimize heat exchanger, a fast running model must be created that will allow for multiple designs to be compared quickly. To model a heat exchanger, volume averaging theory, VAT, is used. VAT allows for the conservation of mass, momentum and energy to be solved for point by point in a 3 dimensional computer model of a heat exchanger. The end product of this project is a computer code that can predict an optimal configuration for a heat exchanger given only a few constraints (input fluids, size, cost, etc.). As VAT computer code can be used to model characteristics )pumping power, temperatures, and cost) of heat exchangers more quickly than traditional CFD or experiment, optimization of every geometric parameter simultaneously can be made. Using design of experiment, DOE and genetric algorithms, GE, to optimize the results of the computer code will improve heat exchanger disign.
DEFF Research Database (Denmark)
Dalgaard, Carl-Johan Lars; Strulik, Holger
2010-01-01
This study introduces physiological aging into a simple model of optimal intertemporal consumption. In this endeavor we draw on the natural science literature on aging. According to the purposed theory, the speed of the aging process and the time of death are endogenously determined by optimal...... health investments. At the same time, physiological aspects of the aging process influence optimal savings and health investment. We calibrate the model for the average US male in 2000 and proceed to show that the calibrated model accounts well for the cross-country link between labor productivity...... and life expectancy in the same year ("the Preston curve"); cross-country income differences can explain differences in life expectancy at age 20 of up to a decade. Moreover, technological change in health care of about 1.1% per year can account for the observed shift in the Preston curve between 1980...
Optimized packings with applications
Pintér, János
2015-01-01
This volume presents a selection of case studies that address a substantial range of optimized object packings (OOP) and their applications. The contributing authors are well-recognized researchers and practitioners. The mathematical modelling and numerical solution aspects of each application case study are presented in sufficient detail. A broad range of OOP problems are discussed: these include various specific and non-standard container loading and object packing problems, as well as the stowing of hazardous and other materials on container ships, data centre resource management, automotive engineering design, space station logistic support, cutting and packing problems with placement constraints, the optimal design of LED street lighting, robust sensor deployment strategies, spatial scheduling problems, and graph coloring models and metaheuristics for packing applications. Novel points of view related to model development and to computational nonlinear, global, mixed integer optimization and heuristic st...
Optimal data verification procedures
International Nuclear Information System (INIS)
Avenhaus, R.; Busse, S.; Piehlmeier, G.
1991-01-01
In order to verify the material balance data reported by plant operators, the safeguards authority performs independent measurements on a random sampling basis and compares the resulting data with the reported ones. It is shown that the so-called D-statistic, which originally has been justified with heuristic arguments and since then has been used in practice for many years, is optimal if the total assumed falsification is small. Furthermore, numerical calculations indicate that for larger total falsification, where a more complicated test procedure would be optimal, the D-test is still useful from a practical point of view. For very large total falsification, the optimal test statistic is complicated; this, however, is not so important since here one is approaching the attribute sampling area
Byrne, Charles L
2014-01-01
Optimization without Calculus Chapter Summary The Arithmetic Mean-Geometric Mean Inequality An Application of the AGM Inequality: the Number e Extending the AGM Inequality Optimization Using the AGM Inequality The Holder and Minkowski Inequalities Cauchy's Inequality Optimizing using Cauchy's Inequality An Inner Product for Square Matrices Discrete Allocation Problems Geometric Programming Chapter Summary An Example of a GP Problem Posynomials and the GP Problem The Dual GP Problem Solving the GP Problem Solving the DGP Problem Constrained Geometric Programming Basic Analysis Chapter Summary Minima and Infima Limits Completeness Continuity Limsup and Liminf Another View Semi-Continuity Convex Sets Chapter SummaryThe Geometry of Real Euclidean Space A Bit of Topology Convex Sets in RJ More on Projections Linear and Affine Operators on RJ The Fundamental Theorems Block-Matrix Notation Theorems of the Alternative Another Proof of Farkas' Lemma Gordan's Theorem Revisited Vector Spaces and Matrices Chapter Summary...
Energy Technology Data Exchange (ETDEWEB)
McMordie Stoughton, Kate; Duan, Xiaoli; Wendel, Emily M.
2013-08-26
This technology evaluation was prepared by Pacific Northwest National Laboratory on behalf of the U.S. Department of Energy’s Federal Energy Management Program (FEMP). ¬The technology evaluation assesses techniques for optimizing reverse osmosis (RO) systems to increase RO system performance and water efficiency. This evaluation provides a general description of RO systems, the influence of RO systems on water use, and key areas where RO systems can be optimized to reduce water and energy consumption. The evaluation is intended to help facility managers at Federal sites understand the basic concepts of the RO process and system optimization options, enabling them to make informed decisions during the system design process for either new projects or recommissioning of existing equipment. This evaluation is focused on commercial-sized RO systems generally treating more than 80 gallons per hour.¬
Energy Technology Data Exchange (ETDEWEB)
None
2013-08-01
This technology evaluation was prepared by Pacific Northwest National Laboratory on behalf of the U.S. Department of Energy’s Federal Energy Management Program (FEMP). The technology evaluation assesses techniques for optimizing reverse osmosis (RO) systems to increase RO system performance and water efficiency. This evaluation provides a general description of RO systems, the influence of RO systems on water use, and key areas where RO systems can be optimized to reduce water and energy consumption. The evaluation is intended to help facility managers at Federal sites understand the basic concepts of the RO process and system optimization options, enabling them to make informed decisions during the system design process for either new projects or recommissioning of existing equipment. This evaluation is focused on commercial-sized RO systems generally treating more than 80 gallons per hour.
Energy Technology Data Exchange (ETDEWEB)
Dall' Anese, Emiliano; Simonetto, Andrea
2018-03-01
This paper considers distribution networks featuring inverter-interfaced distributed energy resources, and develops distributed feedback controllers that continuously drive the inverter output powers to solutions of AC optimal power flow (OPF) problems. Particularly, the controllers update the power setpoints based on voltage measurements as well as given (time-varying) OPF targets, and entail elementary operations implementable onto low-cost microcontrollers that accompany power-electronics interfaces of gateways and inverters. The design of the control framework is based on suitable linear approximations of the AC power-flow equations as well as Lagrangian regularization methods. Convergence and OPF-target tracking capabilities of the controllers are analytically established. Overall, the proposed method allows to bypass traditional hierarchical setups where feedback control and optimization operate at distinct time scales, and to enable real-time optimization of distribution systems.
Dualities in Nonholonomic Optimization
Directory of Open Access Journals (Sweden)
Udrişte Constantin
2016-12-01
Full Text Available This article deals with optimizing problems whose restrictions are nonholonomic. The central issue relates to dual nonholonomic programs (what they mean and how they are solved? when the nonholonomic constraints are given by Pfaff equations. We emphasize that nonholonomic critical points are not the classical ones and that the nonholonomic Lagrange multipliers are not the classical (holonomic Lagrange multipliers. Topological significance of Lagrange multipliers and dual function theory introduced by EDO and EDP are key results. Also new Riemannian geometries attached to a given nonholonomic constrained optimization problem are introduced. The original results are surprising and include: (i aspects derived from the Vranceanu theory of nonholonomic manifolds, and from the geometric distributions theory, (ii optimal problems in Darboux canonical coordinates.
Determining Optimal Decision Version
Directory of Open Access Journals (Sweden)
Olga Ioana Amariei
2014-06-01
Full Text Available In this paper we start from the calculation of the product cost, applying the method of calculating the cost of hour- machine (THM, on each of the three cutting machines, namely: the cutting machine with plasma, the combined cutting machine (plasma and water jet and the cutting machine with a water jet. Following the calculation of cost and taking into account the precision of manufacturing of each machine, as well as the quality of the processed surface, the optimal decisional version needs to be determined regarding the product manufacturing. To determine the optimal decisional version, we resort firstly to calculating the optimal version on each criterion, and then overall using multiattribute decision methods.
Fuzzy logic controller optimization
Sepe, Jr., Raymond B; Miller, John Michael
2004-03-23
A method is provided for optimizing a rotating induction machine system fuzzy logic controller. The fuzzy logic controller has at least one input and at least one output. Each input accepts a machine system operating parameter. Each output produces at least one machine system control parameter. The fuzzy logic controller generates each output based on at least one input and on fuzzy logic decision parameters. Optimization begins by obtaining a set of data relating each control parameter to at least one operating parameter for each machine operating region. A model is constructed for each machine operating region based on the machine operating region data obtained. The fuzzy logic controller is simulated with at least one created model in a feedback loop from a fuzzy logic output to a fuzzy logic input. Fuzzy logic decision parameters are optimized based on the simulation.
Optimization of Combinatorial Mutagenesis
Parker, Andrew S.; Griswold, Karl E.; Bailey-Kellogg, Chris
Protein engineering by combinatorial site-directed mutagenesis evaluates a portion of the sequence space near a target protein, seeking variants with improved properties (stability, activity, immunogenicity, etc.). In order to improve the hit-rate of beneficial variants in such mutagenesis libraries, we develop methods to select optimal positions and corresponding sets of the mutations that will be used, in all combinations, in constructing a library for experimental evaluation. Our approach, OCoM (Optimization of Combinatorial Mutagenesis), encompasses both degenerate oligonucleotides and specified point mutations, and can be directed accordingly by requirements of experimental cost and library size. It evaluates the quality of the resulting library by one- and two-body sequence potentials, averaged over the variants. To ensure that it is not simply recapitulating extant sequences, it balances the quality of a library with an explicit evaluation of the novelty of its members. We show that, despite dealing with a combinatorial set of variants, in our approach the resulting library optimization problem is actually isomorphic to single-variant optimization. By the same token, this means that the two-body sequence potential results in an NP-hard optimization problem. We present an efficient dynamic programming algorithm for the one-body case and a practically-efficient integer programming approach for the general two-body case. We demonstrate the effectiveness of our approach in designing libraries for three different case study proteins targeted by previous combinatorial libraries - a green fluorescent protein, a cytochrome P450, and a beta lactamase. We found that OCoM worked quite efficiently in practice, requiring only 1 hour even for the massive design problem of selecting 18 mutations to generate 107 variants of a 443-residue P450. We demonstrate the general ability of OCoM in enabling the protein engineer to explore and evaluate trade-offs between quality and
Filters in topology optimization
DEFF Research Database (Denmark)
Bourdin, Blaise
1999-01-01
In this article, a modified (``filtered'') version of the minimum compliance topology optimization problem is studied. The direct dependence of the material properties on its pointwise density is replaced by a regularization of the density field using a convolution operator. In this setting...... it is possible to establish the existence of solutions. Moreover, convergence of an approximation by means of finite elements can be obtained. This is illustrated through some numerical experiments. The ``filtering'' technique is also shown to cope with two important numerical problems in topology optimization...
Towards Optimal PDE Simulations
International Nuclear Information System (INIS)
Keyes, David
2009-01-01
The Terascale Optimal PDE Solvers (TOPS) Integrated Software Infrastructure Center (ISIC) was created to develop and implement algorithms and support scientific investigations performed by DOE-sponsored researchers. These simulations often involve the solution of partial differential equations (PDEs) on terascale computers. The TOPS Center researched, developed and deployed an integrated toolkit of open-source, optimal complexity solvers for the nonlinear partial differential equations that arise in many DOE application areas, including fusion, accelerator design, global climate change and reactive chemistry. The algorithms created as part of this project were also designed to reduce current computational bottlenecks by orders of magnitude on terascale computers, enabling scientific simulation on a scale heretofore impossible.
[Optimization of oxytetracycline biosynthesis].
Maksimova, E A; Falkov, N N; Izmaĭlov, N N; Romanchuk, N N
1988-06-01
It was shown that rising of temperature up to 30 degrees C at the stage of the oxytetracycline-producing organism growth promoted acceleration of the culture growth rate and increasing of the antibiotic concentration by the 114th hour of the biosynthetic process. For the apparatus used in the study optimal aeration and agitation conditions were developed. To provide optimal parameters during biosynthesis of oxytetracycline, it was recommended to use the aeration rate of 1 v/v.min and the specific mechanical power for mixing of not less than 1 kW/m3.
Distributed Optimization System
Hurtado, John E.; Dohrmann, Clark R.; Robinett, III, Rush D.
2004-11-30
A search system and method for controlling multiple agents to optimize an objective using distributed sensing and cooperative control. The search agent can be one or more physical agents, such as a robot, and can be software agents for searching cyberspace. The objective can be: chemical sources, temperature sources, radiation sources, light sources, evaders, trespassers, explosive sources, time dependent sources, time independent sources, function surfaces, maximization points, minimization points, and optimal control of a system such as a communication system, an economy, a crane, and a multi-processor computer.
Touati, Sid
2014-01-01
This book is a summary of more than a decade of research in the area of backend optimization. It contains the latest fundamental research results in this field. While existing books are often more oriented toward Masters students, this book is aimed more towards professors and researchers as it contains more advanced subjects.It is unique in the sense that it contains information that has not previously been covered by other books in the field, with chapters on phase ordering in optimizing compilation; register saturation in instruction level parallelism; code size reduction for software pipe
Power converter design optimization
Yu, Y.; Lee, F. C. Y.; Triner, J. E.
1977-01-01
Utilizing the demonstrated capability of nonlinear programming algorithms, a practical design optimization approach for power converters is established to conceive a design to meet all power-circuit performance requirements and concurrently optimize a defined quantity such as weight or losses. In addition, to facilitate a cost-effective design, the computer-aided approach provides a means to readily assess (1) the weight-efficiency tradeoff, (2) impacts of converter requirements and component characteristics on a given design, and (3) optimum power system configurations.
Ekren, Ibrahim; Soner, H. Mete
2018-03-01
The classical duality theory of Kantorovich (C R (Doklady) Acad Sci URSS (NS) 37:199-201, 1942) and Kellerer (Z Wahrsch Verw Gebiete 67(4):399-432, 1984) for classical optimal transport is generalized to an abstract framework and a characterization of the dual elements is provided. This abstract generalization is set in a Banach lattice X with an order unit. The problem is given as the supremum over a convex subset of the positive unit sphere of the topological dual of X and the dual problem is defined on the bi-dual of X. These results are then applied to several extensions of the classical optimal transport.
An introduction to optimization
Chong, Edwin K P
2013-01-01
Praise for the Third Edition "". . . guides and leads the reader through the learning path . . . [e]xamples are stated very clearly and the results are presented with attention to detail."" -MAA Reviews Fully updated to reflect new developments in the field, the Fourth Edition of Introduction to Optimization fills the need for accessible treatment of optimization theory and methods with an emphasis on engineering design. Basic definitions and notations are provided in addition to the related fundamental background for linear algebra, geometry, and calculus. This new
Optimization by record dynamics
DEFF Research Database (Denmark)
Barettin, Daniele; Sibani, Paolo
2014-01-01
Large dynamical changes in thermalizing glassy systems are triggered by trajectories crossing record sized barriers, a behavior revealing the presence of a hierarchical structure in configuration space. The observation is here turned into a novel local search optimization algorithm dubbed record...... dynamics optimization,or RDO. RDO uses the Metropolis rule to accept or reject candidate solutions depending on the value of a parameter akin to the temperature and minimizes the cost function of the problem at hand through cycles where its ‘temperature’ is raised and subsequently decreased in order...
Analytical methods of optimization
Lawden, D F
2006-01-01
Suitable for advanced undergraduates and graduate students, this text surveys the classical theory of the calculus of variations. It takes the approach most appropriate for applications to problems of optimizing the behavior of engineering systems. Two of these problem areas have strongly influenced this presentation: the design of the control systems and the choice of rocket trajectories to be followed by terrestrial and extraterrestrial vehicles.Topics include static systems, control systems, additional constraints, the Hamilton-Jacobi equation, and the accessory optimization problem. Prereq
Optimization of dental implantation
Dol, Aleksandr V.; Ivanov, Dmitriy V.
2017-02-01
Modern dentistry can not exist without dental implantation. This work is devoted to study of the "bone-implant" system and to optimization of dental prostheses installation. Modern non-invasive methods such as MRI an 3D-scanning as well as numerical calculations and 3D-prototyping allow to optimize all of stages of dental prosthetics. An integrated approach to the planning of implant surgery can significantly reduce the risk of complications in the first few days after treatment, and throughout the period of operation of the prosthesis.
Disturbance by optimal discrimination
Kawakubo, Ryûitirô; Koike, Tatsuhiko
2018-03-01
We discuss the disturbance by measurements which unambiguously discriminate between given candidate states. We prove that such an optimal measurement necessarily changes distinguishable states indistinguishable when the inconclusive outcome is obtained. The result was previously shown by Chefles [Phys. Lett. A 239, 339 (1998), 10.1016/S0375-9601(98)00064-4] under restrictions on the class of quantum measurements and on the definition of optimality. Our theorems remove these restrictions and are also applicable to infinitely many candidate states. Combining with our previous results, one can obtain concrete mathematical conditions for the resulting states. The method may have a wide variety of applications in contexts other than state discrimination.
Optimization Modeling with Spreadsheets
Baker, Kenneth R
2011-01-01
This introductory book on optimization (mathematical programming) includes coverage on linear programming, nonlinear programming, integer programming and heuristic programming; as well as an emphasis on model building using Excel and Solver. The emphasis on model building (rather than algorithms) is one of the features that makes this book distinctive. Most books devote more space to algorithmic details than to formulation principles. These days, however, it is not necessary to know a great deal about algorithms in order to apply optimization tools, especially when relying on the sp
Practical methods of optimization
Fletcher, R
2013-01-01
Fully describes optimization methods that are currently most valuable in solving real-life problems. Since optimization has applications in almost every branch of science and technology, the text emphasizes their practical aspects in conjunction with the heuristics useful in making them perform more reliably and efficiently. To this end, it presents comparative numerical studies to give readers a feel for possibile applications and to illustrate the problems in assessing evidence. Also provides theoretical background which provides insights into how methods are derived. This edition offers rev
Optimal Responsible Investment
DEFF Research Database (Denmark)
Jessen, Pernille
standards. This paper considers optimal responsible investment for a small retail investor. It extends conventional portfolio theory by allowing for a personal-value based investment decision. Preferences for responsibility are defined in the framework of mean-variance analysis and an optimal responsible...... investment model identified. Implications of the altered investment problem are investigated when the dynamics between portfolio risk, expected return and responsibility is considered. Relying on the definition of a responsible investor, it is shown how superior investment opportunities can emerge when...
Directory of Open Access Journals (Sweden)
Tomas Ulitinas
2011-04-01
Full Text Available The article analyzes the task in truss height and in the optimization of the cross-sections of their elements. Element cross-sections are designed of steel profiles considering requirements for strength, stability and rigidity. A mathematical model is formulated as a nonlinear mathematical programming problem. It is solved as an iterative process, using mathematical software package “MATLAB” routine “fmincon”. The ratio of buckling is corrected in the each iteration. Optimization results are compared with those obtained applying software package “Robot Millennium”.Article in Lithuanian
ATHENA optimized coating design
DEFF Research Database (Denmark)
Ferreira, Desiree Della Monica; Christensen, Finn Erland; Jakobsen, Anders Clemen
2012-01-01
The optimization of coating design for the ATHENA mission si described and the possibility of increasing the telescope effective area in the range between 0.1 and 10 keV is investigated. An independent computation of the on-axis effective area based on the mirror design of ATHENA is performed...... in order to review the current coating baseline. The performance of several material combinations, considering a simple bi-layer, simple multilayer and linear graded multilayer coatings are tested and simulation of the mirror performance considering both the optimized coating design and the coating...
Duality based contact shape optimization
DEFF Research Database (Denmark)
Vondrák, Vít; Dostal, Zdenek; Rasmussen, John
2001-01-01
An implementation of semi-analytic method for the sensitivity analysis in contact shape optimization without friction is described. This method is then applied to the contact shape optimization.......An implementation of semi-analytic method for the sensitivity analysis in contact shape optimization without friction is described. This method is then applied to the contact shape optimization....
Bayesian optimization for materials science
Packwood, Daniel
2017-01-01
This book provides a short and concise introduction to Bayesian optimization specifically for experimental and computational materials scientists. After explaining the basic idea behind Bayesian optimization and some applications to materials science in Chapter 1, the mathematical theory of Bayesian optimization is outlined in Chapter 2. Finally, Chapter 3 discusses an application of Bayesian optimization to a complicated structure optimization problem in computational surface science. Bayesian optimization is a promising global optimization technique that originates in the field of machine learning and is starting to gain attention in materials science. For the purpose of materials design, Bayesian optimization can be used to predict new materials with novel properties without extensive screening of candidate materials. For the purpose of computational materials science, Bayesian optimization can be incorporated into first-principles calculations to perform efficient, global structure optimizations. While re...
Fourier Series Optimization Opportunity
Winkel, Brian
2008-01-01
This note discusses the introduction of Fourier series as an immediate application of optimization of a function of more than one variable. Specifically, it is shown how the study of Fourier series can be motivated to enrich a multivariable calculus class. This is done through discovery learning and use of technology wherein students build the…
DEFF Research Database (Denmark)
Dalgaard, Carl-Johan; Strulik, Holger
the representative consumer is subject to physiological aging. In modeling aging we draw on recent research in the fields of biology and medicine. The speed of the aging process, and thus the time of death, are endogenously determined by optimal health investments. We calibrate the model to US data and proceed...
Optimally segmented magnetic structures
DEFF Research Database (Denmark)
Insinga, Andrea Roberto; Bahl, Christian; Bjørk, Rasmus
We present a semi-analytical algorithm for magnet design problems, which calculates the optimal way to subdivide a given design region into uniformly magnetized segments.The availability of powerful rare-earth magnetic materials such as Nd-Fe-B has broadened the range of applications of permanent...
Ebendt, Rudiger; Drechsler, Rolf
2005-01-01
BDD and SAT are major concepts in VLSI CADNew objective functions for design space exploration require new algorithms for BDD optimizationLatest trend: fusion of the concepts BDD and SATMajor impulses come from Artificial Intelligence (AI)Unifying view, transfers the latest theoretical insights into practical applications.
Solving nonconvex optimization problems
Czech Academy of Sciences Publication Activity Database
Henrion, Didier; Lasserre, J. B.
2004-01-01
Roč. 24, č. 3 (2004), s. 72-83 ISSN 0272-1708 R&D Projects: GA ČR GA102/02/0709 Institutional research plan: CEZ:AV0Z1075907 Keywords : nonconvex optimization * LMI methods Subject RIV: BC - Control System s Theory Impact factor: 1.803, year: 2004
Boone, J.; Goeree, J.K.
2010-01-01
This paper introduces three methodological advances to study the optimal design of static and dynamic markets. First, we apply a mechanism design approach to characterize all incentive-compatible market equilibria. Second, we conduct a normative analysis, i.e. we evaluate alternative competition and
Optimal Super Dielectric Material
2015-09-01
can potentially be optimized to create capacitors with unprecedented energy density. 14. SUBJECT TERMS capacitor , supercapacitor, super ... Capacitor -Increase Area (A)............8 b. Multi-layer Ceramic Capacitor -Decrease Thickness (d) .......10 c. Super Dielectric Material-Increase...EDLC and far above ceramic capacitors , after [5] ............................................9 Table 3. Super Dielectric Material Capacitors from
Optimizing clozapine treatment
DEFF Research Database (Denmark)
Nielsen, J; Damkier, P; Lublin, H
2011-01-01
Clozapine treatment remains the gold standard for treatment-resistant schizophrenia, but treatment with clozapine is associated with several side-effects that complicate the use of the drug. This clinical overview aims to provide psychiatrists with knowledge about how to optimize clozapine...
African Journals Online (AJOL)
BARTH EKWUEME
A Combinatorial Procedure for Constructing D-Optimal Experimental. Designs. Statistica, to appear. Rao, C. R., 1973. Linear Statistical Inference and its Applications, second edition. John Wiley and Sons, New York, pp. 23. Searle, S. R., 1982. Matrix Algebra Useful for Statistics. John Wiley and Sons Inc. New York, pp 95.
Simmons, Joseph P.; Massey, Cade
2012-01-01
Is optimism real, or are optimistic forecasts just cheap talk? To help answer this question, we investigated whether optimistic predictions persist in the face of large incentives to be accurate. We asked National Football League football fans to predict the winner of a single game. Roughly half (the partisans) predicted a game involving their…
Rebilas, Krzysztof
2013-01-01
Consider a skier who goes down a takeoff ramp, attains a speed "V", and jumps, attempting to land as far as possible down the hill below (Fig. 1). At the moment of takeoff the angle between the skier's velocity and the horizontal is [alpha]. What is the optimal angle [alpha] that makes the jump the longest possible for the fixed magnitude of the…
Optimal decoupling controllers revisited
Czech Academy of Sciences Publication Activity Database
Kučera, Vladimír
2013-01-01
Roč. 42, č. 1 (2013), s. 1-16 ISSN 0324-8569 R&D Projects: GA TA ČR(CZ) TE01020197 Institutional support: RVO:67985556 Keywords : linear systems * fractional representations * decoupling controller s * stabilizing controller s * optimal controller s Subject RIV: BC - Control Systems Theory
Toward Optimal Transport Networks
Alexandrov, Natalia; Kincaid, Rex K.; Vargo, Erik P.
2008-01-01
Strictly evolutionary approaches to improving the air transport system a highly complex network of interacting systems no longer suffice in the face of demand that is projected to double or triple in the near future. Thus evolutionary approaches should be augmented with active design methods. The ability to actively design, optimize and control a system presupposes the existence of predictive modeling and reasonably well-defined functional dependences between the controllable variables of the system and objective and constraint functions for optimization. Following recent advances in the studies of the effects of network topology structure on dynamics, we investigate the performance of dynamic processes on transport networks as a function of the first nontrivial eigenvalue of the network's Laplacian, which, in turn, is a function of the network s connectivity and modularity. The last two characteristics can be controlled and tuned via optimization. We consider design optimization problem formulations. We have developed a flexible simulation of network topology coupled with flows on the network for use as a platform for computational experiments.
Optimizing Computer Technology Integration
Dillon-Marable, Elizabeth; Valentine, Thomas
2006-01-01
The purpose of this study was to better understand what optimal computer technology integration looks like in adult basic skills education (ABSE). One question guided the research: How is computer technology integration best conceptualized and measured? The study used the Delphi method to map the construct of computer technology integration and…
Slope constrained Topology Optimization
DEFF Research Database (Denmark)
Petersson, J.; Sigmund, Ole
1998-01-01
The problem of minimum compliance topology optimization of an elastic continuum is considered. A general continuous density-energy relation is assumed, including variable thickness sheet models and artificial power laws. To ensure existence of solutions, the design set is restricted by enforcing...
Topology optimization approaches
DEFF Research Database (Denmark)
Sigmund, Ole; Maute, Kurt
2013-01-01
Topology optimization has undergone a tremendous development since its introduction in the seminal paper by Bendsøe and Kikuchi in 1988. By now, the concept is developing in many different directions, including “density”, “level set”, “topological derivative”, “phase field”, “evolutionary...
Cyclic Railway Timetable Optimization
L.W.P. Peeters (Leon)
2003-01-01
textabstractCyclic Railway Timetable Optimization describes mathematical models and solution methods for constructing high quality cyclic railway timetables. In a cyclic timetable, a train for a certain destination leaves a certain station at the same time every cycle time, say every half an hour,
DEFF Research Database (Denmark)
Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun
1991-01-01
algorithm using successive linear programming is presented. The performance of the algorithm is illustrated by optimizing a network with 201 pipes and 172 nodes. It is concluded that the new algorithm seems to be very efficient and stable, and that it always finds a solution with a cost near the best...
DEFF Research Database (Denmark)
Gravesen, Jens; Henriksen, Christian; Howell, Peter
1998-01-01
The standard scroll compressor consists of two identical spirals (circle involutes) running inside each other.The task from Danfoss was to investigate how a change in the basic geometry of the scrolss and the orbit influence the compressor performnce and efficiency, and then try to optimize...
Calculating Optimal Inventory Size
Directory of Open Access Journals (Sweden)
Ruby Perez
2010-01-01
Full Text Available The purpose of the project is to find the optimal value for the Economic Order Quantity Model and then use a lean manufacturing Kanban equation to find a numeric value that will minimize the total cost and the inventory size.
Towards Optimal Transport Networks
Directory of Open Access Journals (Sweden)
Erik P. Vargo
2010-08-01
Full Text Available Our ultimate goal is to design transportation net- works whose dynamic performance metrics (e.g. pas- senger throughput, passenger delay, and insensitivity to weather disturbances are optimized. Here the fo- cus is on optimizing static features of the network that are known to directly aﬀect the network dynamics. First, we present simulation results which support a connection between maximizing the ﬁrst non-trivial eigenvalue of a network's Laplacian and superior air- port network performance. Then, we explore the ef- fectiveness of a tabu search heuristic for optimizing this metric by comparing experimental results to the- oretical upper bounds. We also consider generating upper bounds on a network's algebraic connectivity via the solution of semideﬁnite programming (SDP relaxations. A modiﬁcation of an existing subgraph extraction algorithm is implemented to explore the underlying regional structures in the U.S. airport net- work, with the hope that the resulting localized struc- tures can be optimized independently and reconnected via a "backbone" network to achieve superior network performance.
Optimal human capital policies
Czech Academy of Sciences Publication Activity Database
Boháček, Radim; Kapička, M.
2008-01-01
Roč. 55, č. 1 (2008), s. 1-16 ISSN 0304-3932 Institutional research plan: CEZ:AV0Z70850503 Keywords : dynamic optimal taxation * income taxation Subject RIV: AH - Economics Impact factor: 1.429, year: 2008
Optimality-theoretic pragmatics
Blutner, R.; Zeevat, H.; Benz, A; Blutner, R.
2009-01-01
The article aims to give an overview about the application of Optimality Theory (OT) to the domain of pragmatics. In the introductory part we discuss different ways to view the division of labor between semantics and pragmatics. Rejecting the doctrine of literal meaning we conform to (i) semantic
Manufacturing tolerant topology optimization
DEFF Research Database (Denmark)
Sigmund, Ole
2009-01-01
(dilated) structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining and macro structures manufactured using milling processes. In the suggested robust topology optimization...
Optimalization of IGBT Communication
Directory of Open Access Journals (Sweden)
Pavol Spanik
2002-01-01
Full Text Available The paper presents IGBT switch off process in order to reduce power loss in the structure. The soft switching method using switch-off after current reduction is used. Process mentioned above is optimized to minimize the power loss that is determined by experiment. Results obtained in the experiment can be helpful in a converter and controller design process.
Optimal fault signal estimation
Stoorvogel, Antonie Arij; Niemann, H.H.; Saberi, A.; Sannuti, P.
2002-01-01
We consider here both fault identification and fault signal estimation. Regarding fault identification, we seek either exact or almost fault identification. On the other hand, regarding fault signal estimation, we seek either $H_2$ optimal, $H_2$ suboptimal or Hinfinity suboptimal estimation. By
Hoogendoorn, S.P.; Daamen, W.; Duives, D.C.; Van Wageningen-Kessels, F.L.M.
2013-01-01
This paper deals with the optimal allocation of routes, destination, and departure times to members of a crowd, for instance in case of an evacuation or another hazardous situation in which the people need to leave the area as quickly as possible. The generic approach minimizes the evacuation times,
Optimal GENCO bidding strategy
Gao, Feng
Electricity industries worldwide are undergoing a period of profound upheaval. The conventional vertically integrated mechanism is being replaced by a competitive market environment. Generation companies have incentives to apply novel technologies to lower production costs, for example: Combined Cycle units. Economic dispatch with Combined Cycle units becomes a non-convex optimization problem, which is difficult if not impossible to solve by conventional methods. Several techniques are proposed here: Mixed Integer Linear Programming, a hybrid method, as well as Evolutionary Algorithms. Evolutionary Algorithms share a common mechanism, stochastic searching per generation. The stochastic property makes evolutionary algorithms robust and adaptive enough to solve a non-convex optimization problem. This research implements GA, EP, and PS algorithms for economic dispatch with Combined Cycle units, and makes a comparison with classical Mixed Integer Linear Programming. The electricity market equilibrium model not only helps Independent System Operator/Regulator analyze market performance and market power, but also provides Market Participants the ability to build optimal bidding strategies based on Microeconomics analysis. Supply Function Equilibrium (SFE) is attractive compared to traditional models. This research identifies a proper SFE model, which can be applied to a multiple period situation. The equilibrium condition using discrete time optimal control is then developed for fuel resource constraints. Finally, the research discusses the issues of multiple equilibria and mixed strategies, which are caused by the transmission network. Additionally, an advantage of the proposed model for merchant transmission planning is discussed. A market simulator is a valuable training and evaluation tool to assist sellers, buyers, and regulators to understand market performance and make better decisions. A traditional optimization model may not be enough to consider the distributed
(Too) optimistic about optimism: the belief that optimism improves performance.
Tenney, Elizabeth R; Logg, Jennifer M; Moore, Don A
2015-03-01
A series of experiments investigated why people value optimism and whether they are right to do so. In Experiments 1A and 1B, participants prescribed more optimism for someone implementing decisions than for someone deliberating, indicating that people prescribe optimism selectively, when it can affect performance. Furthermore, participants believed optimism improved outcomes when a person's actions had considerable, rather than little, influence over the outcome (Experiment 2). Experiments 3 and 4 tested the accuracy of this belief; optimism improved persistence, but it did not improve performance as much as participants expected. Experiments 5A and 5B found that participants overestimated the relationship between optimism and performance even when their focus was not on optimism exclusively. In summary, people prescribe optimism when they believe it has the opportunity to improve the chance of success-unfortunately, people may be overly optimistic about just how much optimism can do. PsycINFO Database Record (c) 2015 APA, all rights reserved.
International Nuclear Information System (INIS)
Bogdan, Zeljko; Cehil, Mislav
2007-01-01
Long-term gas purchase contracts usually determine delivery and payment for gas on the regular hourly basis, independently of demand side consumption. In order to use fuel gas in an economically viable way, optimization of gas distribution for covering consumption must be introduced. In this paper, a mathematical model of the electric utility system which is used for optimization of gas distribution over electric generators is presented. The utility system comprises installed capacity of 1500 MW of thermal power plants, 400 MW of combined heat and power plants, 330 MW of a nuclear power plant and 1600 MW of hydro power plants. Based on known demand curve the optimization model selects plants according to the prescribed criteria. Firstly it engages run-of-river hydro plants, then the public cogeneration plants, the nuclear plant and thermal power plants. Storage hydro plants are used for covering peak load consumption. In case of shortage of installed capacity, the cross-border purchase is allowed. Usage of dual fuel equipment (gas-oil), which is available in some thermal plants, is also controlled by the optimization procedure. It is shown that by using such a model it is possible to properly plan the amount of fuel gas which will be contracted. The contracted amount can easily be distributed over generators efficiently and without losses (no breaks in delivery). The model helps in optimizing of fuel gas-oil ratio for plants with combined burners and enables planning of power plants overhauls over a year in a viable and efficient way. (author)
Costoiu, M.; Ioana, A.; Semenescu, A.; Marcu, D.
2016-11-01
The article presents the main advantages of electric arc furnace (EAF): it has a great contribution to reintroduce significant quantities of reusable metallic materials in the economic circuit, it constitutes itself as an important part in the Primary Materials and Energy Recovery (PMER), good productivity, good quality / price ratio, the possibility of developing a wide variety of classes and types of steels, including special steels and high alloy. In this paper it is presented some important developments of electric arc furnace: vacuum electric arc furnace, artificial intelligence expert systems for pollution control Steelworks. Another important aspect presented in the article is an original block diagram for optimization the EAF management system. This scheme is based on the original objective function (criterion function) represented by the price / quality ratio. The article presents an original block diagram for optimization the control system of the EAF. For designing this concept of EAF management system, many principles were used.
Optimizing well intervention routes
Energy Technology Data Exchange (ETDEWEB)
Paiva, Ronaldo O. [PETROBRAS S.A., Vitoria, ES (Brazil); Schiozer, Denis J.; Bordalo, Sergio N. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Centro de Estudo do Petroleo (CEPETRO)]. E-mail: denis@dep.fem.unicamp.br; bordalo@dep.fem.unicamp.br
2000-07-01
This work presents a method for optimizing the itinerary of work over rigs, i.e., the search for the route of minimum total cost, and demonstrates the importance of the dynamics of reservoir behaviour. The total cost of a route includes the rig expenses (transport, assembly and operation), which are functions of time and distances, plus the losses of revenue in wells waiting for the rig, which are also dependent of time. A reservoir simulator is used to evaluate the monetary influence of the well shutdown on the present value of the production curve. Finally, search algorithms are employed to determine the route of minimal cost. The Simulated Annealing algorithm was also successful in optimizing the distribution of a list of wells among different work over rigs. The rational approach presented here is recommended for management teams as a standard procedure to define the priority of wells scheduled for work over. (author)
Bénichou, O.; Bhat, U.; Krapivsky, P. L.; Redner, S.
2018-02-01
We introduce the frugal foraging model in which a forager performs a discrete-time random walk on a lattice in which each site initially contains S food units. The forager metabolizes one unit of food at each step and starves to death when it last ate S steps in the past. Whenever the forager eats, it consumes all food at its current site and this site remains empty forever (no food replenishment). The crucial property of the forager is that it is frugal and eats only when encountering food within at most k steps of starvation. We compute the average lifetime analytically as a function of the frugality threshold and show that there exists an optimal strategy, namely, an optimal frugality threshold k* that maximizes the forager lifetime.
Real time production optimization
Energy Technology Data Exchange (ETDEWEB)
Saputelli, Luigi; Otavio, Joao; Araujo, Turiassu; Escorcia, Alvaro [Halliburton, Houston, TX (United States). Landmark Division
2004-07-01
Production optimization encompasses various activities of measuring, analyzing, modeling, prioritizing and implementing actions to enhance productivity of a field. We present a state-of-the-art framework for optimizing production on a continuous basis as new sensor data is acquired in real time. Permanently acquired data is modeled and analyzed in order to create predictive models. A model based control strategy is used to regulate well and field instrumentation. The optimum field operating point, which changes with time, satisfies the maximum economic return. This work is a starting point for further development in automatic, intelligent reservoir technologies which get the most out of the abilities of permanent, instrumented wells and remotely activated downhole completions. The strategy, tested with history-matched data from a compartmentalised giant field, proved to reduce operating costs while increasing oil recovery by 27% in this field. (author)
System floorplanning optimization
Browning, David W.
2012-12-01
Notebook and Laptop Original Equipment Manufacturers (OEMs) place great emphasis on creating unique system designs to differentiate themselves in the mobile market. These systems are developed from the \\'outside in\\' with the focus on how the system is perceived by the end-user. As a consequence, very little consideration is given to the interconnections or power of the devices within the system with a mentality of \\'just make it fit\\'. In this paper we discuss the challenges of Notebook system design and the steps by which system floor-planning tools and algorithms can be used to provide an automated method to optimize this process to ensure all required components most optimally fit inside the Notebook system. © 2012 IEEE.
Radiological assessment and optimization
International Nuclear Information System (INIS)
Zeevaert, T.; Sohier, A.
1998-01-01
The objectives of SCK-CEN's research in the field of radiological assessment and optimization are (1) to implement ALARA principles in activities with radiological consequences; (2) to develop methodologies for radiological optimization in decision-aiding; (3) to improve methods to assess in real time the radiological hazards in the environment in case of an accident; (4) to develop methods and programmes to assist decision-makers during a nuclear emergency; (5) to support the policy of radioactive waste management authorities in the field of radiation protection; (6) to investigate computer codes in the area of multi criteria analysis; (7) to organise courses on off-site emergency response to nuclear accidents. Main achievements in these areas for 1997 are summarised
Multistage stochastic optimization
Pflug, Georg Ch
2014-01-01
Multistage stochastic optimization problems appear in many ways in finance, insurance, energy production and trading, logistics and transportation, among other areas. They describe decision situations under uncertainty and with a longer planning horizon. This book contains a comprehensive treatment of today’s state of the art in multistage stochastic optimization. It covers the mathematical backgrounds of approximation theory as well as numerous practical algorithms and examples for the generation and handling of scenario trees. A special emphasis is put on estimation and bounding of the modeling error using novel distance concepts, on time consistency and the role of model ambiguity in the decision process. An extensive treatment of examples from electricity production, asset liability management and inventory control concludes the book
Radiological assessment and optimization
Energy Technology Data Exchange (ETDEWEB)
Zeevaert, T.; Sohier, A
1998-07-01
The objectives of SCK-CEN's research in the field of radiological assessment and optimization are (1) to implement ALARA principles in activities with radiological consequences; (2) to develop methodologies for radiological optimization in decision-aiding; (3) to improve methods to assess in real time the radiological hazards in the environment in case of an accident; (4) to develop methods and programmes to assist decision-makers during a nuclear emergency; (5) to support the policy of radioactive waste management authorities in the field of radiation protection; (6) to investigate computer codes in the area of multi criteria analysis; (7) to organise courses on off-site emergency response to nuclear accidents. Main achievements in these areas for 1997 are summarised.
Group leaders optimization algorithm
Daskin, Anmer; Kais, Sabre
2011-03-01
We present a new global optimization algorithm in which the influence of the leaders in social groups is used as an inspiration for the evolutionary technique which is designed into a group architecture. To demonstrate the efficiency of the method, a standard suite of single and multi-dimensional optimization functions along with the energies and the geometric structures of Lennard-Jones clusters are given as well as the application of the algorithm on quantum circuit design problems. We show that as an improvement over previous methods, the algorithm scales as N 2.5 for the Lennard-Jones clusters of N-particles. In addition, an efficient circuit design is shown for a two-qubit Grover search algorithm which is a quantum algorithm providing quadratic speedup over the classical counterpart.
System floorplanning optimization
Browning, David W.
2013-01-10
Notebook and Laptop Original Equipment Manufacturers (OEMs) place great emphasis on creating unique system designs to differentiate themselves in the mobile market. These systems are developed from the \\'outside in\\' with the focus on how the system is perceived by the end-user. As a consequence, very little consideration is given to the interconnections or power of the devices within the system with a mentality of \\'just make it fit\\'. In this paper we discuss the challenges of Notebook system design and the steps by which system floor-planning tools and algorithms can be used to provide an automated method to optimize this process to ensure all required components most optimally fit inside the Notebook system.
Fučík, Ivan
2015-01-01
This thesis is focused on CRM solutions in small and medium-sized organizations with respect to the quality of their customer relationship. The main goal of this work is to design an optimal CRM solution in the environment of real organization. To achieve this goal it is necessary to understand the theoretical basis of several topics, such as organizations and their relationship with customers, CRM systems, their features and trends. On the basis of these theoretical topics it is possible to ...
Teradata Database System Optimization
Krejčík, Jan
2008-01-01
The Teradata database system is specially designed for data warehousing environment. This thesis explores the use of Teradata in this environment and describes its characteristics and potential areas for optimization. The theoretical part is tended to be a user study material and it shows the main principles Teradata system operation and describes factors significantly affecting system performance. Following sections are based on previously acquired information which is used for analysis and ...
Manufacturing tolerant topology optimization
Sigmund, Ole
2009-01-01
In this paper we present an extension of the topology optimization method to include uncertainties during the fabrication of macro, micro and nano structures. More specifically, we consider devices that are manufactured using processes which may result in (uniformly) too thin (eroded) or too thick (dilated) structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining an...
Assaf Eilat
2007-01-01
Credit card rebates, which are paid to all credit card users regardless of borrowing, have grown substantially. This paper analyzes this phenomenon by comparing the socially and privately optimal interchange fees in debit and credit cards. Compared to debit cards, credit cards raise efficiency by allowing convenient borrowing, but also tax nonholders in order to finance the rebates paid to credit card users. A welfare enhancing and legally feasible policy is suggested, under which the regress...
Hypersonic Vehicle Trajectory Optimization
1981-05-01
equal to a small positive- value. Second, for solving more complex problems, it became apparent that it would be necessary to interrupt the computation...the numerical complexity of the program (time becomes a dependent variable). Later, by additional modification of the optimization code, it has become...calculated previously, set MICO . Ir fCllE lus been used previously to calculate A- 1 z, then v is a by- product of thic calculation and is stored in the
Trajectory Optimization: OTIS 4
Riehl, John P.; Sjauw, Waldy K.; Falck, Robert D.; Paris, Stephen W.
2010-01-01
The latest release of the Optimal Trajectories by Implicit Simulation (OTIS4) allows users to simulate and optimize aerospace vehicle trajectories. With OTIS4, one can seamlessly generate optimal trajectories and parametric vehicle designs simultaneously. New features also allow OTIS4 to solve non-aerospace continuous time optimal control problems. The inputs and outputs of OTIS4 have been updated extensively from previous versions. Inputs now make use of objectoriented constructs, including one called a metastring. Metastrings use a greatly improved calculator and common nomenclature to reduce the user s workload. They allow for more flexibility in specifying vehicle physical models, boundary conditions, and path constraints. The OTIS4 calculator supports common mathematical functions, Boolean operations, and conditional statements. This allows users to define their own variables for use as outputs, constraints, or objective functions. The user-defined outputs can directly interface with other programs, such as spreadsheets, plotting packages, and visualization programs. Internally, OTIS4 has more explicit and implicit integration procedures, including high-order collocation methods, the pseudo-spectral method, and several variations of multiple shooting. Users may switch easily between the various methods. Several unique numerical techniques such as automated variable scaling and implicit integration grid refinement, support the integration methods. OTIS4 is also significantly more user friendly than previous versions. The installation process is nearly identical on various platforms, including Microsoft Windows, Apple OS X, and Linux operating systems. Cross-platform scripts also help make the execution of OTIS and post-processing of data easier. OTIS4 is supplied free by NASA and is subject to ITAR (International Traffic in Arms Regulations) restrictions. Users must have a Fortran compiler, and a Python interpreter is highly recommended.
Optimal control for chemical engineers
Upreti, Simant Ranjan
2013-01-01
Optimal Control for Chemical Engineers gives a detailed treatment of optimal control theory that enables readers to formulate and solve optimal control problems. With a strong emphasis on problem solving, the book provides all the necessary mathematical analyses and derivations of important results, including multiplier theorems and Pontryagin's principle.The text begins by introducing various examples of optimal control, such as batch distillation and chemotherapy, and the basic concepts of optimal control, including functionals and differentials. It then analyzes the notion of optimality, de
Risk Based Optimal Fatigue Testing
DEFF Research Database (Denmark)
Sørensen, John Dalsgaard; Faber, M.H.; Kroon, I.B.
1992-01-01
Optimal fatigue life testing of materials is considered. Based on minimization of the total expected costs of a mechanical component a strategy is suggested to determine the optimal stress range levels for which additional experiments are to be performed together with an optimal value of the maxi......Optimal fatigue life testing of materials is considered. Based on minimization of the total expected costs of a mechanical component a strategy is suggested to determine the optimal stress range levels for which additional experiments are to be performed together with an optimal value...
Optimization and anti-optimization of structures under uncertainty
National Research Council Canada - National Science Library
Elishakoff, Isaac; Ohsaki, Makoto
2010-01-01
.... The necessity of anti-optimization approach is first demonstrated, then the anti-optimization techniques are applied to static, dynamic and buckling problems, thus covering the broadest possible set of applications...
Lifecycle-Based Swarm Optimization Method for Numerical Optimization
Directory of Open Access Journals (Sweden)
Hai Shen
2014-01-01
Full Text Available Bioinspired optimization algorithms have been widely used to solve various scientific and engineering problems. Inspired by biological lifecycle, this paper presents a novel optimization algorithm called lifecycle-based swarm optimization (LSO. Biological lifecycle includes four stages: birth, growth, reproduction, and death. With this process, even though individual organism died, the species will not perish. Furthermore, species will have stronger ability of adaptation to the environment and achieve perfect evolution. LSO simulates Biological lifecycle process through six optimization operators: chemotactic, assimilation, transposition, crossover, selection, and mutation. In addition, the spatial distribution of initialization population meets clumped distribution. Experiments were conducted on unconstrained benchmark optimization problems and mechanical design optimization problems. Unconstrained benchmark problems include both unimodal and multimodal cases the demonstration of the optimal performance and stability, and the mechanical design problem was tested for algorithm practicability. The results demonstrate remarkable performance of the LSO algorithm on all chosen benchmark functions when compared to several successful optimization techniques.
Simulation-based optimization parametric optimization techniques and reinforcement learning
Gosavi, Abhijit
2003-01-01
Simulation-Based Optimization: Parametric Optimization Techniques and Reinforcement Learning introduces the evolving area of simulation-based optimization. The book's objective is two-fold: (1) It examines the mathematical governing principles of simulation-based optimization, thereby providing the reader with the ability to model relevant real-life problems using these techniques. (2) It outlines the computational technology underlying these methods. Taken together these two aspects demonstrate that the mathematical and computational methods discussed in this book do work. Broadly speaking, the book has two parts: (1) parametric (static) optimization and (2) control (dynamic) optimization. Some of the book's special features are: *An accessible introduction to reinforcement learning and parametric-optimization techniques. *A step-by-step description of several algorithms of simulation-based optimization. *A clear and simple introduction to the methodology of neural networks. *A gentle introduction to converg...
Optimization of neutron source
Energy Technology Data Exchange (ETDEWEB)
Hooper, E.B.
1993-11-09
I consider here the optimization of the two component neutron source, allowing beam species and energy to vary. A simple model is developed, based on the earlier publications, that permits the optimum to be obtained simply. The two component plasma, with one species of hot ion (D{sup +} or T{sup +}) and the complementary species of cold ion, is easy to analyze in the case of a spatially uniform cold plasma, as to good approximation the total number of hot ions is important but not their spatial distribution. Consequently, the optimization can ignore spatial effects. The problem of a plasma with both types of hot ions and cold ions is rather more difficult, as the neutron production by hot-hot interactions is sensitive to their spatial distributions. Consequently, consideration of this problem will be delayed to a future memorandum. The basic model is that used in the published articles on the two-component, beam-plasma mirror source. I integrate the Fokker-Planck equation analytically, obtaining good agreement with previous numerical results. This simplifies the optimization, by providing a functional form for the neutron production. The primary result is expressed in terms of the power efficiency: watts of neutrons/watts of primary power. The latter includes the positive ion neutralization efficiency. At 150 keV, the present model obtains an efficiency of 0.66%, compared with 0.53% of the earlier calculation.
THE MARKETING MIX OPTIMIZATION
Directory of Open Access Journals (Sweden)
SABOU FELICIA
2014-02-01
Full Text Available ing mix a particularly important issue is to choose the best combination of its variables, this lead to the achievement objectives, in time. Choosing the right marketing mix is possible only by reporting information to some clear benchmarks, these criteria a related to the objective of the company at the time of analyze. The study shows that the companies must give a great importance to optimize the marketing mix, because of how its combines and integrates company policies relating to the product, price, distribution and promotion, depends the success or the failure on its market. The practice has shown that if an element of the marketing mix is wrong implemented, marketing strategies and programs do not achieve their objectives, and the company can not generate the expected profit. To optimize the marketing mix, companies should consider the following issues: the resources (materials, financial and human, which will be properly allocated to all the elements of the marketing mix, the specific marketing tools and the relationship of interdependence of all the methods and tools used to optimize the marketing mix.
PWR fuel management optimization
International Nuclear Information System (INIS)
Dumas, Michel.
1981-10-01
This report is aimed to the optimization of the refueling pattern of a nuclear reactor. At the beginning of a reactor cycle a batch of fuel assemblies is available: the physical properties of the assemblies are known: the mathematical problem is to determine the refueling pattern which maximizes the reactivity or which provides the flattest possible power distribution. The state of the core is mathematically characterized by a system of partial derivative equations, its smallest eigenvalue and the associated eigenvector. After a study of the convexity properties of the problem, two algorithms are proposed. The first one exhanges assemblies to improve the starting configurations. The enumeration of the exchanges is limited to the 2 by 2, 3 by 3, 4 by 4 permutations. The second one builds a solution in two steps: in the first step the discrete variables are replaced by continuous variables. The non linear optimization problem obtained is solved by ''the Method of Approximation Programming'' and in the second step, the refuelling pattern which provides the best approximation of the optimal power distribution is searched by a Branch an d Bound Method [fr
Optimization in radiological protection
International Nuclear Information System (INIS)
Acosta Perez, Clarice de Freitas
1996-01-01
The optimization concept in radiation protection is, in its essence, practical. In each aspect that we deal with the man, it is necessary to take frequent decisions such as: what is the protection level to be pursued, since the protection levels under consideration provide doses lower than the appropriate annual limits. The optimization gives a basic framework of the minding that is appropriate to conduct to a balance kind of the resources available for the protection and protection level obtained against a multitude of factors and constrains in a manner to obtain the best result. In this work, was performed the optimization, from the radiation protection point of view, of a facility project who enclose two shielded hot cells where will be handled UO 2 small plate with 50% of U-235 burn-up, irradiated in the research swimming pool reactor, IEA-R1. To obtain this goal were specified the relevant factors and criteria, were applied the main techniques used in a decision-making in radiological protection, presently adopted and was performed a sensibility study of the factors and criteria used in this work. In order to obtain a greater agility in applying the techniques for decision-making was developed a micro computer program. (author)
(Too) optimistic about optimism: The belief that optimism improves performance
Tenney, ER; Logg, JM; Moore, DA
2015-01-01
© 2015 American Psychological Association. A series of experiments investigated why people value optimism and whether they are right to do so. In Experiments 1A and 1B, participants prescribed more optimism for someone implementing decisions than for someone deliberating, indicating that people prescribe optimism selectively, when it can affect performance. Furthermore, participants believed optimism improved outcomes when a person's actions had considerable, rather than little, influence ove...
Infrared Drying Parameter Optimization
Jackson, Matthew R.
In recent years, much research has been done to explore direct printing methods, such as screen and inkjet printing, as alternatives to the traditional lithographic process. The primary motivation is reduction of the material costs associated with producing common electronic devices. Much of this research has focused on developing inkjet or screen paste formulations that can be printed on a variety of substrates, and which have similar conductivity performance to the materials currently used in the manufacturing of circuit boards and other electronic devices. Very little research has been done to develop a process that would use direct printing methods to manufacture electronic devices in high volumes. This study focuses on developing and optimizing a drying process for conductive copper ink in a high volume manufacturing setting. Using an infrared (IR) dryer, it was determined that conductive copper prints could be dried in seconds or minutes as opposed to tens of minutes or hours that it would take with other drying devices, such as a vacuum oven. In addition, this study also identifies significant parameters that can affect the conductivity of IR dried prints. Using designed experiments and statistical analysis; the dryer parameters were optimized to produce the best conductivity performance for a specific ink formulation and substrate combination. It was determined that for an ethylene glycol, butanol, 1-methoxy 2- propanol ink formulation printed on Kapton, the optimal drying parameters consisted of a dryer height of 4 inches, a temperature setting between 190 - 200°C, and a dry time of 50-65 seconds depending on the printed film thickness as determined by the number of print passes. It is important to note that these parameters are optimized specifically for the ink formulation and substrate used in this study. There is still much research that needs to be done into optimizing the IR dryer for different ink substrate combinations, as well as developing a
Security constrained optimal power flow by modern optimization tools
African Journals Online (AJOL)
Security constrained optimal power flow by modern optimization tools. ... International Journal of Engineering, Science and Technology ... This problem is represented as a two stage, security constrained OPF problem, in which the first stage optimizes the problem using a genetic algorithm for the purpose of comparison, ...
Ames Optimized TCA Configuration
Cliff, Susan E.; Reuther, James J.; Hicks, Raymond M.
1999-01-01
Configuration design at Ames was carried out with the SYN87-SB (single block) Euler code using a 193 x 49 x 65 C-H grid. The Euler solver is coupled to the constrained (NPSOL) and the unconstrained (QNMDIF) optimization packages. Since the single block grid is able to model only wing-body configurations, the nacelle/diverter effects were included in the optimization process by SYN87's option to superimpose the nacelle/diverter interference pressures on the wing. These interference pressures were calculated using the AIRPLANE code. AIRPLANE is an Euler solver that uses a unstructured tetrahedral mesh and is capable of computations about arbitrary complete configurations. In addition, the buoyancy effects of the nacelle/diverters were also included in the design process by imposing the pressure field obtained during the design process onto the triangulated surfaces of the nacelle/diverter mesh generated by AIRPLANE. The interference pressures and nacelle buoyancy effects are added to the final forces after each flow field calculation. Full details of the (recently enhanced) ghost nacelle capability are given in a related talk. The pseudo nacelle corrections were greatly improved during this design cycle. During the Ref H and Cycle 1 design activities, the nacelles were only translated and pitched. In the cycle 2 design effort the nacelles can translate vertically, and pitch to accommodate the changes in the lower surface geometry. The diverter heights (between their leading and trailing edges) were modified during design as the shape of the lower wing changed, with the drag of the diverter changing accordingly. Both adjoint and finite difference gradients were used during optimization. The adjoint-based gradients were found to give good direction in the design space for configurations near the starting point, but as the design approached a minimum, the finite difference gradients were found to be more accurate. Use of finite difference gradients was limited by the
Graph theory and combinatorial optimization
Marcotte, Odile; Avis, David
2006-01-01
A current treatment of cutting-edge topics in Graph Theory and Combinatorial Optimization by leading researchersIncludes heuristic advances and novel approaches to solving combinatorial optimization problems.
Taking Stock of Unrealistic Optimism.
Shepperd, James A; Klein, William M P; Waters, Erika A; Weinstein, Neil D
2013-07-01
Researchers have used terms such as unrealistic optimism and optimistic bias to refer to concepts that are similar but not synonymous. Drawing from three decades of research, we critically discuss how researchers define unrealistic optimism and we identify four types that reflect different measurement approaches: unrealistic absolute optimism at the individual and group level and unrealistic comparative optimism at the individual and group level. In addition, we discuss methodological criticisms leveled against research on unrealistic optimism and note that the criticisms are primarily relevant to only one type-the group form of unrealistic comparative optimism. We further clarify how the criticisms are not nearly as problematic even for unrealistic comparative optimism as they might seem. Finally, we note boundary conditions on the different types of unrealistic optimism and reflect on five broad questions that deserve further attention.
OPTIMAL EVAPORATING AND CONDENSING TEMPERATURES ...
African Journals Online (AJOL)
ORC) in a hot and humid environment. A theoretical procedure is proposed for the determination of the optimal evaporation temperature (OET) and optimal condensing temperature (OCT) of a subcritical ORC plant, which is based on ...
Taking Stock of Unrealistic Optimism
Shepperd, James A.; Klein, William M. P.; Waters, Erika A.; Weinstein, Neil D.
2015-01-01
Researchers have used terms such as unrealistic optimism and optimistic bias to refer to concepts that are similar but not synonymous. Drawing from three decades of research, we critically discuss how researchers define unrealistic optimism and we identify four types that reflect different measurement approaches: unrealistic absolute optimism at the individual and group level and unrealistic comparative optimism at the individual and group level. In addition, we discuss methodological criticisms leveled against research on unrealistic optimism and note that the criticisms are primarily relevant to only one type—the group form of unrealistic comparative optimism. We further clarify how the criticisms are not nearly as problematic even for unrealistic comparative optimism as they might seem. Finally, we note boundary conditions on the different types of unrealistic optimism and reflect on five broad questions that deserve further attention. PMID:26045714
Topology optimized electrothermal polysilicon microgrippers
DEFF Research Database (Denmark)
Sardan Sukas, Özlem; Petersen, Dirch Hjorth; Mølhave, Kristian
2008-01-01
This paper presents the topology optimized design procedure and fabrication of electrothermal polysilicon microgrippers for nanomanipulation purposes. Performance of the optimized microactuators is compared with a conventional three-beam microactuator design through finite element analysis...
Introduction to optimal control theory
International Nuclear Information System (INIS)
Agrachev, A.A.
2002-01-01
These are lecture notes of the introductory course in Optimal Control theory treated from the geometric point of view. Optimal Control Problem is reduced to the study of controls (and corresponding trajectories) leading to the boundary of attainable sets. We discuss Pontryagin Maximum Principle, basic existence results, and apply these tools to concrete simple optimal control problems. Special sections are devoted to the general theory of linear time-optimal problems and linear-quadratic problems. (author)
Coil Optimization for HTS Machines
DEFF Research Database (Denmark)
Mijatovic, Nenad; Jensen, Bogi Bech; Abrahamsen, Asger Bech
An optimization approach of HTS coils in HTS synchronous machines (SM) is presented. The optimization is aimed at high power SM suitable for direct driven wind turbines applications. The optimization process was applied to a general radial flux machine with a peak air gap flux density of ~3T...... is suitable for which coil segment is presented. Thus, the performed study gives valuable input for the coil design of HTS machines ensuring optimal usage of HTS tapes....
Time-Space Topology Optimization
DEFF Research Database (Denmark)
Jensen, Jakob Søndergaard
2008-01-01
A method for space-time topology optimization is outlined. The space-time optimization strategy produces structures with optimized material distributions that vary in space and in time. The method is demonstrated for one-dimensional wave propagation in an elastic bar that has a time-dependent Young......’s modulus and is subjected to a transient load. In the example an optimized dynamic structure is demonstrated that compresses a propagating Gauss pulse....
Stochastic optimization: beyond mathematical programming
CERN. Geneva
2015-01-01
Stochastic optimization, among which bio-inspired algorithms, is gaining momentum in areas where more classical optimization algorithms fail to deliver satisfactory results, or simply cannot be directly applied. This presentation will introduce baseline stochastic optimization algorithms, and illustrate their efficiency in different domains, from continuous non-convex problems to combinatorial optimization problem, to problems for which a non-parametric formulation can help exploring unforeseen possible solution spaces.
Directory of Open Access Journals (Sweden)
Ahmet Demir
2017-01-01
Full Text Available In the fields which require finding the most appropriate value, optimization became a vital approach to employ effective solutions. With the use of optimization techniques, many different fields in the modern life have found solutions to their real-world based problems. In this context, classical optimization techniques have had an important popularity. But after a while, more advanced optimization problems required the use of more effective techniques. At this point, Computer Science took an important role on providing software related techniques to improve the associated literature. Today, intelligent optimization techniques based on Artificial Intelligence are widely used for optimization problems. The objective of this paper is to provide a comparative study on the employment of classical optimization solutions and Artificial Intelligence solutions for enabling readers to have idea about the potential of intelligent optimization techniques. At this point, two recently developed intelligent optimization algorithms, Vortex Optimization Algorithm (VOA and Cognitive Development Optimization Algorithm (CoDOA, have been used to solve some multidisciplinary optimization problems provided in the source book Thomas' Calculus 11th Edition and the obtained results have compared with classical optimization solutions.
Risk Based Optimal Fatigue Testing
DEFF Research Database (Denmark)
Sørensen, John Dalsgaard; Faber, M.H.; Kroon, I.B.
1992-01-01
Optimal fatigue life testing of materials is considered. Based on minimization of the total expected costs of a mechanical component a strategy is suggested to determine the optimal stress range levels for which additional experiments are to be performed together with an optimal value...
Partisan optimism and political bargaining
DEFF Research Database (Denmark)
Jensen, Thomas; Madum, Andreas
2017-01-01
to explore the implications of partisan optimism for political bargaining. We show that increased optimism among a partisan group leads to a stronger bargaining position for their party, but may hurt its electoral prospects. Another main finding is that even high levels of partisan optimism do...
Time-Space Topology Optimization
DEFF Research Database (Denmark)
Jensen, Jakob Søndergaard
2008-01-01
A method for space-time topology optimization is outlined. The space-time optimization strategy produces structures with optimized material distributions that vary in space and in time. The method is demonstrated for one-dimensional wave propagation in an elastic bar that has a time-dependent Young...
Optimal patent policies: A survey
DEFF Research Database (Denmark)
Poulsen, Odile
2002-01-01
, the government uses two policy tools, the optimal breadth and length. We show that theoretical models give very different answers to what is the optimal patent policy. In particular, we show that the optimal patent policy depends among othet things on the price elasticity of demand, the intersectoral elasticity...
Reivich, Karen
2010-01-01
Dictionary definitions of optimism encompass two related concepts. The first of these is a hopeful disposition or a conviction that good will ultimately prevail. The second, broader conception of optimism refers to the belief, or the inclination to believe, that the world is the best of all possible worlds. In psychological research, optimism has…
Multicriteria VMAT optimization
International Nuclear Information System (INIS)
Craft, David; McQuaid, Dualta; Wala, Jeremiah; Chen, Wei; Salari, Ehsan; Bortfeld, Thomas
2012-01-01
Purpose: To make the planning of volumetric modulated arc therapy (VMAT) faster and to explore the tradeoffs between planning objectives and delivery efficiency. Methods: A convex multicriteria dose optimization problem is solved for an angular grid of 180 equi-spaced beams. This allows the planner to navigate the ideal dose distribution Pareto surface and select a plan of desired target coverage versus organ at risk sparing. The selected plan is then made VMAT deliverable by a fluence map merging and sequencing algorithm, which combines neighboring fluence maps based on a similarity score and then delivers the merged maps together, simplifying delivery. Successive merges are made as long as the dose distribution quality is maintained. The complete algorithm is called VMERGE. Results: VMERGE is applied to three cases: a prostate, a pancreas, and a brain. In each case, the selected Pareto-optimal plan is matched almost exactly with the VMAT merging routine, resulting in a high quality plan delivered with a single arc in less than 5 min on average. Conclusions: VMERGE offers significant improvements over existing VMAT algorithms. The first is the multicriteria planning aspect, which greatly speeds up planning time and allows the user to select the plan, which represents the most desirable compromise between target coverage and organ at risk sparing. The second is the user-chosen epsilon-optimality guarantee of the final VMAT plan. Finally, the user can explore the tradeoff between delivery time and plan quality, which is a fundamental aspect of VMAT that cannot be easily investigated with current commercial planning systems.
Optimal Packed String Matching
DEFF Research Database (Denmark)
Ben-Kiki, Oren; Bille, Philip; Breslauer, Dany
2011-01-01
In the packed string matching problem, each machine word accommodates – characters, thus an n-character text occupies n/– memory words. We extend the Crochemore-Perrin constantspace O(n)-time string matching algorithm to run in optimal O(n/–) time and even in real-time, achieving a factor – speedup...... over traditional algorithms that examine each character individually. Our solution can be efficiently implemented, unlike prior theoretical packed string matching work. We adapt the standard RAM model and only use its AC0 instructions (i.e., no multiplication) plus two specialized AC0 packed string...
Optimizing production under uncertainty
DEFF Research Database (Denmark)
Rasmussen, Svend
This Working Paper derives criteria for optimal production under uncertainty based on the state-contingent approach (Chambers and Quiggin, 2000), and discusses po-tential problems involved in applying the state-contingent approach in a normative context. The analytical approach uses the concept...... of state-contingent production functions and a definition of inputs including both sort of input, activity and alloca-tion technology. It also analyses production decisions where production is combined with trading in state-contingent claims such as insurance contracts. The final part discusses...
Optimization Foundations and Applications
Miller, H Ronald
2011-01-01
A thorough and highly accessible resource for analysts in a broad range of social sciences. Optimization: Foundations and Applications presents a series of approaches to the challenges faced by analysts who must find the best way to accomplish particular objectives, usually with the added complication of constraints on the available choices. Award-winning educator Ronald E. Miller provides detailed coverage of both classical, calculus-based approaches and newer, computer-based iterative methods. Dr. Miller lays a solid foundation for both linear and nonlinear models and quickly moves on to dis
DEFF Research Database (Denmark)
Toman, David; Bowman, Ivan Thomas
2003-01-01
, these query languages are implemented by translating temporal queries into standard relational queries. However, the compiled queries are often quite cumbersome and expensive to execute even using state-of-the-art relational products. This paper presents an optimization technique that produces more efficient...... translated SQL queries by taking into account the properties of the encoding used for temporal attributes. For concreteness, this translation technique is presented in the context of SQL/TP; however, these techniques are also applicable to other temporal query languages....
Helbing, Dirk; Vicsek, Tamás
1999-08-01
We present computational and analytical results indicating that systems of driven entities with repulsive interactions tend to reach an optimal state associated with minimal interaction and minimal dissipation. Using concepts related to those from non-equilibrium thermodynamics as well as game theoretical ideas, we generalize this finding to an even wider class of self-organizing systems which have the ability to reach a state of maximal overall `success'. This principle is expected to be relevant for driven systems in physics such as sheared granular media, but it is also applicable to biological, social and economic systems, for which only a limited number of quantitative principles are yet available.
Davis, Harold
2006-01-01
SEO--short for Search Engine Optimization--is the art, craft, and science of driving web traffic to web sites. Web traffic is food, drink, and oxygen--in short, life itself--to any web-based business. Whether your web site depends on broad, general traffic, or high-quality, targeted traffic, this PDF has the tools and information you need to draw more traffic to your site. You'll learn how to effectively use PageRank (and Google itself); how to get listed, get links, and get syndicated; and much more. The field of SEO is expanding into all the possible ways of promoting web traffic. This
AbouEisha, Hassan M.
2014-01-01
The problem of attribute reduction is an important problem related to feature selection and knowledge discovery. The problem of finding reducts with minimum cardinality is NP-hard. This paper suggests a new algorithm for finding exact reducts with minimum cardinality. This algorithm transforms the initial table to a decision table of a special kind, apply a set of simplification steps to this table, and use a dynamic programming algorithm to finish the construction of an optimal reduct. I present results of computer experiments for a collection of decision tables from UCIML Repository. For many of the experimented tables, the simplification steps solved the problem.
Fundamentals and Optimal Institutions
DEFF Research Database (Denmark)
Gonzalez-Eiras, Martin; Harmon, Nikolaj Arpe; Rossi, Martín
2016-01-01
To shed light on the relation between fundamentals and adopted institutions we examine institutional choice across the ``Big Four'' US sports leagues. Despite having very similar business models and facing the same economic and legal environment, these leagues exhibit large differences in their use...... of regulatory institutions such as revenue sharing, salary caps or luxury taxes. We show, theoretically and empirically, that these large differences in adopted institutions can be rationalized as optimal responses to differences in the fundamental characteristics of the sports being played. This provides...
Ahmet Demir; Utku Kose
2016-01-01
ABSTRACT In the fields which require finding the most appropriate value, optimization became a vital approach to employ effective solutions. With the use of optimization techniques, many different fields in the modern life have found solutions to their real-world based problems. In this context, classical optimization techniques have had an important popularity. But after a while, more advanced optimization problems required the use of more effective techniques. At this point, Computer Sc...
Ahmet Demir; Utku kose
2017-01-01
In the fields which require finding the most appropriate value, optimization became a vital approach to employ effective solutions. With the use of optimization techniques, many different fields in the modern life have found solutions to their real-world based problems. In this context, classical optimization techniques have had an important popularity. But after a while, more advanced optimization problems required the use of more effective techniques. At this point, Computer Science took an...
Topology optimized permanent magnet systems
DEFF Research Database (Denmark)
Bjørk, Rasmus; Bahl, Christian; Insinga, Andrea Roberto
2017-01-01
Topology optimization of permanent magnet systems consisting of permanent magnets, high permeability iron and air is presented. An implementation of topology optimization for magnetostatics is discussed and three examples are considered. The Halbach cylinder is topology optimized with iron...... and an increase of 15% in magnetic efficiency is shown. A topology optimized structure to concentrate a homogeneous field is shown to increase the magnitude of the field by 111%. Finally, a permanent magnet with alternating high and low field regions is topology optimized and a ΛcoolΛcool figure of merit of 0...
Optimal taxation with household production
DEFF Research Database (Denmark)
Kleven, Henrik Jacobsen; Richter, Wolfram F.; Sørensen, Peter Birch
2000-01-01
on consumer services even if such services are complements to leisure. Second, we find that when services and other goods are equally substitutable for leisure, so that uniform commodity taxation would be optimal in the absence of home production, the optimal tax structure will certainly involve a relatively......This paper suggests that the optimal tax system should favour market-produced services which are close substitutes for home-produced services. First, we modify the classical Corlett-Hague rule for optimal commodity taxation by showing that it may be optimal to impose a relatively low tax rate...... low tax rate on consumer services...
The theory of optimal taxation
DEFF Research Database (Denmark)
Sørensen, Peter Birch
2007-01-01
that the information needed to implement the differentiated taxation prescribed by optimal tax theory may be easier to obtain than previously believed. The paper also points to the strong similarity between optimal commodity tax rules and the rules for optimal source-based capital income taxation......The paper discusses the implications of optimal tax theory for the debates on uniform commodity taxation and neutral capital income taxation. While strong administrative and political economy arguments in favor of uniform and neutral taxation remain, recent advances in optimal tax theory suggest...
The Theory of Optimal Taxation
DEFF Research Database (Denmark)
Sørensen, Peter Birch
that the information needed to implement the differentiated taxation prescribed by optimal tax theory may be easier to obtain than previously believed. The paper also points to the strong similarity between optimal commodity tax rules and the rules for optimal source-based capital income taxation......The paper discusses the implications of optimal tax theory for the debates on uniform commodity taxation and neutral capital income taxation. While strong administrative and political economy arguments in favor of uniform and neutral taxation remain, recent advances in optimal tax theory suggest...
Giga-Voxel Structural Optimization
DEFF Research Database (Denmark)
Aage, Niels; Andreassen, Erik; Lazarov, Boyan Stefanov
2017-01-01
The optimal topology of large structural systems has until now been concerned with the design of individual parts and not that of complete assemblies. However, due to recent advances in numerical algorithms tailored for large scale structural optimization this limitation can now be circumvented....... In this work we present several examplesdisplaying how high resolution topology optimization can be used to obtain new, as well as already known, insight within the field of structural optimization. To demonstrate the capabilities of the developed framework we apply it to the design of the supporting structure...... topology optimization provides new insight and possible weight savings forfuture aircraft designs....
Optimal Control of Mechanical Systems
Directory of Open Access Journals (Sweden)
Vadim Azhmyakov
2007-01-01
Full Text Available In the present work, we consider a class of nonlinear optimal control problems, which can be called “optimal control problems in mechanics.” We deal with control systems whose dynamics can be described by a system of Euler-Lagrange or Hamilton equations. Using the variational structure of the solution of the corresponding boundary-value problems, we reduce the initial optimal control problem to an auxiliary problem of multiobjective programming. This technique makes it possible to apply some consistent numerical approximations of a multiobjective optimization problem to the initial optimal control problem. For solving the auxiliary problem, we propose an implementable numerical algorithm.
Jarp, S
2001-01-01
Examines key features of the Itanium processor architecture and microarchitecture. The Itanium, originally known as the IA-64, is a 64-bit processor designed by Hewlett-Packard and Intel. In addition to the obvious performance gains that 64-bit addressing brings, the Itanium also supports performance-enhancing techniques such as predication, speculation, rotating registers, a wide parallel execution core, high clock speed, fast bus architecture, multiple execution units, and the like. Moreover, the Itanium is designed from the ground up around parallelism and uses a new kind of instruction set based on the Explicit Parallel Instruction Computing (EPIC) specification, which allows the processing of Windows-based and UNIX- based applications, among other features. Operating-system support for the IA-64 has been announced for 64-bit Windows, HP-UX, varieties of Linux, and AIX 51. The author shows how to achieve optimal code generation by a compiler or generate optimized sequences ofIA-64 assembly code to ensure ...
Energy Technology Data Exchange (ETDEWEB)
Bower, Stanley [Ford Motor Company, Dearborn, MI (United States)
2011-12-31
A 5.0L V8 twin-turbocharged direct injection engine was designed, built, and tested for the purpose of assessing the fuel economy and performance in the F-Series pickup of the Dual Fuel engine concept and of an E85 optimized FFV engine. Additionally, production 3.5L gasoline turbocharged direct injection (GTDI) EcoBoost engines were converted to Dual Fuel capability and used to evaluate the cold start emissions and fuel system robustness of the Dual Fuel engine concept. Project objectives were: to develop a roadmap to demonstrate a minimized fuel economy penalty for an F-Series FFV truck with a highly boosted, high compression ratio spark ignition engine optimized to run with ethanol fuel blends up to E85; to reduce FTP 75 energy consumption by 15% - 20% compared to an equally powered vehicle with a current production gasoline engine; and to meet ULEV emissions, with a stretch target of ULEV II / Tier II Bin 4. All project objectives were met or exceeded.
Optimization of molecular representativeness.
Yosipof, Abraham; Senderowitz, Hanoch
2014-06-23
Representative subsets selected from within larger data sets are useful in many chemoinformatics applications including the design of information-rich compound libraries, the selection of compounds for biological evaluation, and the development of reliable quantitative structure-activity relationship (QSAR) models. Such subsets can overcome many of the problems typical of diverse subsets, most notably the tendency of the latter to focus on outliers. Yet only a few algorithms for the selection of representative subsets have been reported in the literature. Here we report on the development of two algorithms for the selection of representative subsets from within parent data sets based on the optimization of a newly devised representativeness function either alone or simultaneously with the MaxMin function. The performances of the new algorithms were evaluated using several measures representing their ability to produce (1) subsets which are, on average, close to data set compounds; (2) subsets which, on average, span the same space as spanned by the entire data set; (3) subsets mirroring the distribution of biological indications in a parent data set; and (4) test sets which are well predicted by qualitative QSAR models built on data set compounds. We demonstrate that for three data sets (containing biological indication data, logBBB permeation data, and Plasmodium falciparum inhibition data), subsets obtained using the new algorithms are more representative than subsets obtained by hierarchical clustering, k-means clustering, or the MaxMin optimization at least in three of these measures.
Optimizing accelerator technology
Katarina Anthony
2012-01-01
A new EU-funded research and training network, oPAC, is bringing together 22 universities, research centres and industry partners to optimize particle accelerator technology. CERN is one of the network’s main partners and will host 5 early-stage researchers in the BE department. A diamond detector that will be used for novel beam diagnostics applications in the oPAC project based at CIVIDEC. (Image courtesy of CIVIDEC.) As one of the largest Marie Curie Initial Training Networks ever funded by the EU – to the tune of €6 million – oPAC extends well beyond the particle physics community. “Accelerator physics has become integral to research in almost every scientific discipline – be it biology and life science, medicine, geology and material science, or fundamental physics,” explains Carsten P. Welsch, oPAC co-ordinator based at the University of Liverpool. “By optimizing the operation of accelerators, all of these...
Post-optimal analysis in linear semi-infinite optimization
Goberna, Miguel A
2014-01-01
Post-Optimal Analysis in Linear Semi-Infinite Optimization examines the following topics in regards to linear semi-infinite optimization: modeling uncertainty, qualitative stability analysis, quantitative stability analysis and sensitivity analysis. Linear semi-infinite optimization (LSIO) deals with linear optimization problems where the dimension of the decision space or the number of constraints is infinite. The authors compare the post-optimal analysis with alternative approaches to uncertain LSIO problems and provide readers with criteria to choose the best way to model a given uncertain LSIO problem depending on the nature and quality of the data along with the available software. This work also contains open problems which readers will find intriguing a challenging. Post-Optimal Analysis in Linear Semi-Infinite Optimization is aimed toward researchers, graduate and post-graduate students of mathematics interested in optimization, parametric optimization and related topics.
Optimal Formation Trajectory-Planning Using Parameter Optimization Technique
Directory of Open Access Journals (Sweden)
Hyung-Chul Lim
2004-09-01
Full Text Available Some methods have been presented to get optimal formation trajectories in the step of configuration or reconfiguration, which subject to constraints of collision avoidance and final configuration. In this study, a method for optimal formation trajectory-planning is introduced in view of fuel/time minimization using parameter optimization technique which has not been applied to optimal trajectory-planning for satellite formation flying. New constraints of nonlinear equality are derived for final configuration and constraints of nonlinear inequality are used for collision avoidance. The final configuration constraints are that three or more satellites should be placed in an equilateral polygon of the circular horizontal plane orbit. Several examples are given to get optimal trajectories based on the parameter optimization problem which subjects to constraints of collision avoidance and final configuration. They show that the introduced method for trajectory-planning is well suited to trajectory design problems of formation flying missions.
Directory of Open Access Journals (Sweden)
Roger Koenker
2014-09-01
Full Text Available Convex optimization now plays an essential role in many facets of statistics. We briefly survey some recent developments and describe some implementations of these methods in R . Applications of linear and quadratic programming are introduced including quantile regression, the Huber M-estimator and various penalized regression methods. Applications to additively separable convex problems subject to linear equality and inequality constraints such as nonparametric density estimation and maximum likelihood estimation of general nonparametric mixture models are described, as are several cone programming problems. We focus throughout primarily on implementations in the R environment that rely on solution methods linked to R, like MOSEK by the package Rmosek. Code is provided in R to illustrate several of these problems. Other applications are available in the R package REBayes, dealing with empirical Bayes estimation of nonparametric mixture models.
Optimal blind quantum computation.
Mantri, Atul; Pérez-Delgado, Carlos A; Fitzsimons, Joseph F
2013-12-06
Blind quantum computation allows a client with limited quantum capabilities to interact with a remote quantum computer to perform an arbitrary quantum computation, while keeping the description of that computation hidden from the remote quantum computer. While a number of protocols have been proposed in recent years, little is currently understood about the resources necessary to accomplish the task. Here, we present general techniques for upper and lower bounding the quantum communication necessary to perform blind quantum computation, and use these techniques to establish concrete bounds for common choices of the client's quantum capabilities. Our results show that the universal blind quantum computation protocol of Broadbent, Fitzsimons, and Kashefi, comes within a factor of 8/3 of optimal when the client is restricted to preparing single qubits. However, we describe a generalization of this protocol which requires exponentially less quantum communication when the client has a more sophisticated device.
PLZT Microfibers Technology Optimization
Directory of Open Access Journals (Sweden)
Kozielski L.
2016-09-01
Full Text Available Electrocaloric (EC structures for a new generation of cooling or heating elements utilize the temperature dependence of spontaneous polarization in some ferroelectric materials to convert waste heat into electricity and vice versa. A (Pb0.93La0.07 (Zr0.65Ti0.35O3 material, have the largest recorded pyroelectric coefficient. An effective predicted form for such applications is fiber, due to small heat capacitance and quick response time, even for nano second laser excitation. Consequently, the presented work provides a description of the optimization of structural, ferroelectric and piezoelectric properties of obtained fibers, finally concluding on necessity of sintering temperature reduction in 100°C in contrast to bulk form to effectively prevent its destruction.
Power, control and optimization
Vasant, Pandian; Barsoum, Nader
2013-01-01
The book consists of chapters based on selected papers of international conference „Power, Control and Optimization 2012”, held in Las Vegas, USA. Readers can find interesting chapters discussing various topics from the field of power control, its distribution and related fields. Book discusses topics like energy consumption impacted by climate, mathematical modeling of the influence of thermal power plant on the aquatic environment, investigation of cost reduction in residential electricity bill using electric vehicle at peak times or allocation and size evaluation of distributed generation using ANN model and others. Chapter authors are to the best of our knowledge the originators or closely related to the originators of presented ideas and its applications. Hence, this book certainly is one of the few books discussing the benefit from intersection of those modern and fruitful scientific fields of research with very tight and deep impact on real life and industry. This book is devoted to the studies o...
LHCb trigger streams optimization
Derkach, D.; Kazeev, N.; Neychev, R.; Panin, A.; Trofimov, I.; Ustyuzhanin, A.; Vesterinen, M.
2017-10-01
The LHCb experiment stores around 1011 collision events per year. A typical physics analysis deals with a final sample of up to 107 events. Event preselection algorithms (lines) are used for data reduction. Since the data are stored in a format that requires sequential access, the lines are grouped into several output file streams, in order to increase the efficiency of user analysis jobs that read these data. The scheme efficiency heavily depends on the stream composition. By putting similar lines together and balancing the stream sizes it is possible to reduce the overhead. We present a method for finding an optimal stream composition. The method is applied to a part of the LHCb data (Turbo stream) on the stage where it is prepared for user physics analysis. This results in an expected improvement of 15% in the speed of user analysis jobs, and will be applied on data to be recorded in 2017.
Rebilas, Krzysztof
2013-02-01
Consider a skier who goes down a takeoff ramp, attains a speed V, and jumps, attempting to land as far as possible down the hill below (Fig. 1). At the moment of takeoff the angle between the skier's velocity and the horizontal is α. What is the optimal angle α that makes the jump the longest possible for the fixed magnitude of the velocity V? Of course, in practice, this is a very sophisticated problem; the skier's range depends on a variety of complex factors in addition to V and α. However, if we ignore these and assume the jumper is in free fall between the takeoff ramp and the landing point below, the problem becomes an exercise in kinematics that is suitable for introductory-level students. The solution is presented here.
Linearly constrained minimax optimization
DEFF Research Database (Denmark)
Madsen, Kaj; Schjær-Jacobsen, Hans
1978-01-01
We present an algorithm for nonlinear minimax optimization subject to linear equality and inequality constraints which requires first order partial derivatives. The algorithm is based on successive linear approximations to the functions defining the problem. The resulting linear subproblems...... are solved in the minimax sense subject to the linear constraints. This ensures a feasible-point algorithm. Further, we introduce local bounds on the solutions of the linear subproblems, the bounds being adjusted automatically, depending on the quality of the linear approximations. It is proved...... that the algorithm will always converge to the set of stationary points of the problem, a stationary point being defined in terms of the generalized gradients of the minimax objective function. It is further proved that, under mild regularity conditions, the algorithm is identical to a quadratically convergent...
International Nuclear Information System (INIS)
Cook, G.O. Jr.; Knight, L.
1979-07-01
The question of optimal projection angles has recently become of interest in the field of reconstruction from projections. Here, studies are concentrated on the n x n pixel space, where literative algorithms such as ART and direct matrix techniques due to Katz are considered. The best angles are determined in a Gauss--Markov statistical sense as well as with respect to a function-theoretical error bound. The possibility of making photon intensity a function of angle is also examined. Finally, the best angles to use in an ART-like algorithm are studied. A certain set of unequally spaced angles was found to be preferred in several contexts. 15 figures, 6 tables
Lane, John S
1977-01-01
The overall purpose of this monograph is to integrate and critically evaluate the existing literature in the area of optimal joint savings population programs. The existing diverse presentations are all seen to be discussions within a unified framework. The central problem is to compare the desirability of alternative inter-temporal sequences of total savings and population sizes. Of critical importance is whether one regards persons as the fundamental moral entities or whether one takes Sidgwick's viewpoint that something good being the result of one's action is the baSic reason for dOing anything. The latter viewpoint is consistent with defining a complete social preference ordering over these alternative sequences. Since part of one's interest is to evaluate the consequences of various ethical beliefs a com parative study of several such orderings is presented; in particular the Mill-Wolfe average utilitarian, and Sidgwick-Meade classical utilitarian) formulations. A possible problem with the social pref...
Optimized nanoporous materials.
Energy Technology Data Exchange (ETDEWEB)
Braun, Paul V. (University of Illinois at Urbana-Champaign, Urbana, IL); Langham, Mary Elizabeth; Jacobs, Benjamin W.; Ong, Markus D.; Narayan, Roger J. (North Carolina State University, Raleigh, NC); Pierson, Bonnie E. (North Carolina State University, Raleigh, NC); Gittard, Shaun D. (North Carolina State University, Raleigh, NC); Robinson, David B.; Ham, Sung-Kyoung (Korea Basic Science Institute, Gangneung, South Korea); Chae, Weon-Sik (Korea Basic Science Institute, Gangneung, South Korea); Gough, Dara V. (University of Illinois at Urbana-Champaign, Urbana, IL); Wu, Chung-An Max; Ha, Cindy M.; Tran, Kim L.
2009-09-01
Nanoporous materials have maximum practical surface areas for electrical charge storage; every point in an electrode is within a few atoms of an interface at which charge can be stored. Metal-electrolyte interfaces make best use of surface area in porous materials. However, ion transport through long, narrow pores is slow. We seek to understand and optimize the tradeoff between capacity and transport. Modeling and measurements of nanoporous gold electrodes has allowed us to determine design principles, including the fact that these materials can deplete salt from the electrolyte, increasing resistance. We have developed fabrication techniques to demonstrate architectures inspired by these principles that may overcome identified obstacles. A key concept is that electrodes should be as close together as possible; this is likely to involve an interpenetrating pore structure. However, this may prove extremely challenging to fabricate at the finest scales; a hierarchically porous structure can be a worthy compromise.
International Nuclear Information System (INIS)
Glass, R.E.; Longenbaugh, R.S.
1986-01-01
Sandia National Laboratories developed the TRansUranic PACkage Transporter (TRUPACT) to transport defense contact-handled transuranic wastes. The package has been designed to meet the normal and hypothetical accident conditions in 10CFR71 which includes the demonstrated ability to survive a 1-meter drop onto a mild steel pin. The puncture protection is provided by puncture resistant panels. In conjunction with the development of TRUPACT, a series of experiments has been conducted to reduce the weight of the puncture resistant panels. The initial scoping tests resulted in a preliminary design incorporating 30 layers of Kevlar. This design has been shown to meet the regulatory puncture test. To reduce the weight of this panel, subscale tests were conducted on panels utilizing Kevlar yarns with varying mass per unit length (denier) as well as different resins. This paper reviews the testing undertaken in the original panel development and discusses the results obtained from the recent subscale and full-scale optimization tests
Wind turbine pitch optimization
DEFF Research Database (Denmark)
Biegel, Benjamin; Juelsgaard, Morten; Stoustrup, Jakob
2011-01-01
We consider a static wind model for a three-bladed, horizontal-axis, pitch-controlled wind turbine. When placed in a wind field, the turbine experiences several mechanical loads, which generate power but also create structural fatigue. We address the problem of finding blade pitch profiles......% compared to any constant pitch profile while sacrificing at most 7% of the maximum attainable output power. Using iterative learning, we show that very similar performance can be achieved by using only load measurements, with no knowledge of the wind field or wind turbine model....... for maximizing power production while simultaneously minimizing fatigue loads. In this paper, we show how this problem can be approximately solved using convex optimization. When there is full knowledge of the wind field, numerical simulations show that force and torque RMS variation can be reduced by over 96...
Optimizing Persistent Random Searches
Tejedor, Vincent; Voituriez, Raphael; Bénichou, Olivier
2012-02-01
We consider a minimal model of persistent random searcher with a short range memory. We calculate exactly for such a searcher the mean first-passage time to a target in a bounded domain and find that it admits a nontrivial minimum as function of the persistence length. This reveals an optimal search strategy which differs markedly from the simple ballistic motion obtained in the case of Poisson distributed targets. Our results show that the distribution of targets plays a crucial role in the random search problem. In particular, in the biologically relevant cases of either a single target or regular patterns of targets, we find that, in strong contrast to repeated statements in the literature, persistent random walks with exponential distribution of excursion lengths can minimize the search time, and in that sense perform better than any Levy walk.
Optimal protocols and optimal transport in stochastic thermodynamics
Aurell, Erik; Mejia-Monasterio, Carlos; Muratore-Ginanneschi, Paolo
2010-01-01
Thermodynamics of small systems has become an important field of statistical physics. They are driven out of equilibrium by a control, and the question is naturally posed how such a control can be optimized. We show that optimization problems in small system thermodynamics are solved by (deterministic) optimal transport, for which very efficient numerical methods have been developed, and of which there are applications in Cosmology, fluid mechanics, logistics, and many other fields. We show, ...
OPTIMAL NETWORK TOPOLOGY DESIGN
Yuen, J. H.
1994-01-01
This program was developed as part of a research study on the topology design and performance analysis for the Space Station Information System (SSIS) network. It uses an efficient algorithm to generate candidate network designs (consisting of subsets of the set of all network components) in increasing order of their total costs, and checks each design to see if it forms an acceptable network. This technique gives the true cost-optimal network, and is particularly useful when the network has many constraints and not too many components. It is intended that this new design technique consider all important performance measures explicitly and take into account the constraints due to various technical feasibilities. In the current program, technical constraints are taken care of by the user properly forming the starting set of candidate components (e.g. nonfeasible links are not included). As subsets are generated, they are tested to see if they form an acceptable network by checking that all requirements are satisfied. Thus the first acceptable subset encountered gives the cost-optimal topology satisfying all given constraints. The user must sort the set of "feasible" link elements in increasing order of their costs. The program prompts the user for the following information for each link: 1) cost, 2) connectivity (number of stations connected by the link), and 3) the stations connected by that link. Unless instructed to stop, the program generates all possible acceptable networks in increasing order of their total costs. The program is written only to generate topologies that are simply connected. Tests on reliability, delay, and other performance measures are discussed in the documentation, but have not been incorporated into the program. This program is written in PASCAL for interactive execution and has been implemented on an IBM PC series computer operating under PC DOS. The disk contains source code only. This program was developed in 1985.
Optimization of radiation therapy
International Nuclear Information System (INIS)
Ohtsubo, Masaaki
1990-01-01
In radiotherapy, dose optimization is to give adequate dose uniformly over target volume and minimize the dose to normal and adjacent critical organs. Therefore, it is necessary to analyze dose distribution in detail. This paper presents a method for quantitatively assessing treatment planning by analysis of dose distribution. For this purpose, several parameters were introduced, such as D T, min (minimum target absorbed dose), NUF (nonuniformity factor), volume rate of damaged lung and spinal cord, R T/T (ratio of target volume to treatment volume), LE (local efficiency), integral dose, etc. And some criteria were made using these parameters, and were applied to evaluate various plans in external beam radiation therapy for lung and esophagus cancer. In these parameters, NUF was especially useful to obtain three-dimensional dose information of target volume, and value of NUF was in agreement with the information provided by dose volume histogram. AP-PA parallel opposed fields technique was inferior in D T,min and NUF. In lung cancer, there was no spinal cord injury in oblique parallel opposed fields technique, and this technique is particularly useful when target volume is in posterior. In these two techniques, R T/T was small and hot spots were frequently observed. R T/T was largest in oblique wedged two-fields technique, but this technique was inferior in D T, min and NUF. About D T, min and NUF, four fields technique was the best, but in this technique spinal cord complication often occurred in case that target volume was in the middle. In moving beam technique (360deg rotation or arc), integral dose is large, and the more target volume is in posterior, the more often spinal cord complication occurs. In esophageal cancer, three fields technique was the best to avoid spinal cord injury. It seems that this method is very useful for optimization in radiation treatment planning. (author)
Public optimism towards nanomedicine
Bottini, Massimo; Rosato, Nicola; Gloria, Fulvia; Adanti, Sara; Corradino, Nunziella; Bergamaschi, Antonio; Magrini, Andrea
2011-01-01
Background Previous benefit–risk perception studies and social experiences have clearly demonstrated that any emerging technology platform that ignores benefit–risk perception by citizens might jeopardize its public acceptability and further development. The aim of this survey was to investigate the Italian judgment on nanotechnology and which demographic and heuristic variables were most influential in shaping public perceptions of the benefits and risks of nanotechnology. Methods In this regard, we investigated the role of four demographic (age, gender, education, and religion) and one heuristic (knowledge) predisposing factors. Results The present study shows that gender, education, and knowledge (but not age and religion) influenced the Italian perception of how nanotechnology will (positively or negatively) affect some areas of everyday life in the next twenty years. Furthermore, the picture that emerged from our study is that Italian citizens, despite minimal familiarity with nanotechnology, showed optimism towards nanotechnology applications, especially those related to health and medicine (nanomedicine). The high regard for nanomedicine was tied to the perception of risks associated with environmental and societal implications (division among social classes and increased public expenses) rather than health issues. However, more highly educated people showed greater concern for health issues but this did not decrease their strong belief about the benefits that nanotechnology would bring to medical fields. Conclusion The results reported here suggest that public optimism towards nanomedicine appears to justify increased scientific effort and funding for medical applications of nanotechnology. It also obligates toxicologists, politicians, journalists, entrepreneurs, and policymakers to establish a more responsible dialog with citizens regarding the nature and implications of this emerging technology platform. PMID:22267931
Portfolio optimization retail investor
Directory of Open Access Journals (Sweden)
I. А. Kiseleva
2016-01-01
Full Text Available The article notes that the task of the investor's risk management is to, on the one hand, as much as possible to strive to achieve the criterion of risk level, and on the other hand, in any case not exceed it. Since the domestic theory of risk management is under development, the problem of the optimal ratio of "risk-income" becomes now of particular relevance. This article discusses the different distribution areas of the private investor in order to obtain the maximum profit. The analysis showed us the overall economic and political system of the country, as well as the legislative provision of guarantees to the investor. To obtain sufficient income and reduce losses it is important to maintain the optimum value found between the amount of the investor's risk and capital transactions. Model of optimal placement of funds led to the conclusion about inexpediency strong increase in the diversification of the investment portfolio (more than 10 different types of assets in the portfolio, since it increases the complexity of its practical form, while the portfolio characteristics are improved significantly. It is concluded that it is impossible to increase revenue without increasing the risk or reduce risk without reducing income. The analysis shows that there is no single best asset portfolio. It is impossible to increase revenue without increasing the risk or reduce risk without reducing income. Possible combination of the "riskincome" will depend on the objective function. Most diversified and bringing the best return per unit of risk, is a portfolio that contains the most risky assets.
Constrained Optimization and Optimal Control for Partial Differential Equations
Leugering, Günter; Griewank, Andreas
2012-01-01
This special volume focuses on optimization and control of processes governed by partial differential equations. The contributors are mostly participants of the DFG-priority program 1253: Optimization with PDE-constraints which is active since 2006. The book is organized in sections which cover almost the entire spectrum of modern research in this emerging field. Indeed, even though the field of optimal control and optimization for PDE-constrained problems has undergone a dramatic increase of interest during the last four decades, a full theory for nonlinear problems is still lacking. The cont
Optimal PMU Placement By Improved Particle Swarm Optimization
DEFF Research Database (Denmark)
Rather, Zakir Hussain; Liu, Leo; Chen, Zhe
2013-01-01
This paper presents an improved method of binary particle swarm optimization (IBPSO) technique for optimal phasor measurement unit (PMU) placement in a power network for complete system observability. Various effective improvements have been proposed to enhance the efficiency and convergence rate...... of conventional particle swarm optimization method. The proposed method of IBPSO ensures optimal PMU placement with and without consideration of zero injection measurements. The proposed method has been applied to standard test systems like 17 bus, IEEE 24-bus, IEEE 30-bus, New England 39-bus, IEEE 57-bus system...
TimeNET Optimization Environment
Directory of Open Access Journals (Sweden)
Christoph Bodenstein
2015-12-01
Full Text Available In this paper a novel tool for simulation-based optimization and design-space exploration of Stochastic Colored Petri nets (SCPN is introduced. The working title of this tool is TimeNET Optimization Environment (TOE. Targeted users of this tool are people modeling complex systems with SCPNs in TimeNET who want to find parameter sets that are optimal for a certain performance measure (fitness function. It allows users to create and simulate sets of SCPNs and to run different optimization algorithms based on parameter variation. The development of this tool was motivated by the need to automate and speed up tests of heuristic optimization algorithms to be applied for SCPN optimization. A result caching mechanism is used to avoid recalculations.
Stiffened Composite Fuselage Barrel Optimization
Movva, R. G.; Mittal, A.; Agrawal, K.; Upadhyay, C. S.
2012-07-01
In a typical commercial transport aircraft, Stiffened skin panels and frames contribute around 40% of the fuselage weight. In the current study a stiffened composite fuselage skin panel optimization engine is developed for optimization of the layups of composite panels and stringers using Genetic Algorithm (GA). The skin and stringers of the fuselage section are optimized for the strength and the stability requirements. The selection of the GA parameters considered for the optimization is arrived by performing case studies on selected problems. The optimization engine facilitates in carrying out trade studies for selection of the optimum ply layup and material combination for the configuration being analyzed. The optimization process is applied on a sample model and the results are presented.
Recent advances in computational optimization
2013-01-01
Optimization is part of our everyday life. We try to organize our work in a better way and optimization occurs in minimizing time and cost or the maximization of the profit, quality and efficiency. Also many real world problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks. This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization. This book presents recent advances in computational optimization. The volume includes important real world problems like parameter settings for con- trolling processes in bioreactor, robot skin wiring, strip packing, project scheduling, tuning of PID controller and so on. Some of them can be solved by applying traditional numerical methods, but others need a huge amount of computational resources. For them it is shown that is appropriate to develop algorithms based on metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming etc...
Optimal management strategies in variable environments: Stochastic optimal control methods
Williams, B.K.
1985-01-01
Dynamic optimization was used to investigate the optimal defoliation of salt desert shrubs in north-western Utah. Management was formulated in the context of optimal stochastic control theory, with objective functions composed of discounted or time-averaged biomass yields. Climatic variability and community patterns of salt desert shrublands make the application of stochastic optimal control both feasible and necessary. A primary production model was used to simulate shrub responses and harvest yields under a variety of climatic regimes and defoliation patterns. The simulation results then were used in an optimization model to determine optimal defoliation strategies. The latter model encodes an algorithm for finite state, finite action, infinite discrete time horizon Markov decision processes. Three questions were addressed: (i) What effect do changes in weather patterns have on optimal management strategies? (ii) What effect does the discounting of future returns have? (iii) How do the optimal strategies perform relative to certain fixed defoliation strategies? An analysis was performed for the three shrub species, winterfat (Ceratoides lanata), shadscale (Atriplex confertifolia) and big sagebrush (Artemisia tridentata). In general, the results indicate substantial differences among species in optimal control strategies, which are associated with differences in physiological and morphological characteristics. Optimal policies for big sagebrush varied less with variation in climate, reserve levels and discount rates than did either shadscale or winterfat. This was attributed primarily to the overwintering of photosynthetically active tissue and to metabolic activity early in the growing season. Optimal defoliation of shadscale and winterfat generally was more responsive to differences in plant vigor and climate, reflecting the sensitivity of these species to utilization and replenishment of carbohydrate reserves. Similarities could be seen in the influence of both
An Optimal Lower Eigenvalue System
Directory of Open Access Journals (Sweden)
Yingfan Liu
2011-01-01
Full Text Available An optimal lower eigenvalue system is studied, and main theorems including a series of necessary and suffcient conditions concerning existence and a Lipschitz continuity result concerning stability are obtained. As applications, solvability results to some von-Neumann-type input-output inequalities, growth, and optimal growth factors, as well as Leontief-type balanced and optimal balanced growth paths, are also gotten.
Nature-inspired optimization algorithms
Yang, Xin-She
2014-01-01
Nature-Inspired Optimization Algorithms provides a systematic introduction to all major nature-inspired algorithms for optimization. The book's unified approach, balancing algorithm introduction, theoretical background and practical implementation, complements extensive literature with well-chosen case studies to illustrate how these algorithms work. Topics include particle swarm optimization, ant and bee algorithms, simulated annealing, cuckoo search, firefly algorithm, bat algorithm, flower algorithm, harmony search, algorithm analysis, constraint handling, hybrid methods, parameter tuning
GAPS IN SUPPORT VECTOR OPTIMIZATION
Energy Technology Data Exchange (ETDEWEB)
STEINWART, INGO [Los Alamos National Laboratory; HUSH, DON [Los Alamos National Laboratory; SCOVEL, CLINT [Los Alamos National Laboratory; LIST, NICOLAS [Los Alamos National Laboratory
2007-01-29
We show that the stopping criteria used in many support vector machine (SVM) algorithms working on the dual can be interpreted as primal optimality bounds which in turn are known to be important for the statistical analysis of SVMs. To this end we revisit the duality theory underlying the derivation of the dual and show that in many interesting cases primal optimality bounds are the same as known dual optimality bounds.
Professor: The Animal Planet Optimization
Satish Gajawada
2014-01-01
This paper is dedicated to everyone who is interested in making this planet a better place to live. In the past, researchers have explored behavior of several animals separately. But there is scope to explore in the direction where various artificial animals together solve the optimization problem. In this paper, Satish Gajawada proposed The AnimalPlanet Optimization. The concept of this paper is to imitate all the animals on this planet. The idea is to solve the optimization problem where al...
Optimally segmented permanent magnet structures
DEFF Research Database (Denmark)
Insinga, Andrea Roberto; Bjørk, Rasmus; Smith, Anders
2016-01-01
We present an optimization approach which can be employed to calculate the globally optimal segmentation of a two-dimensional magnetic system into uniformly magnetized pieces. For each segment the algorithm calculates the optimal shape and the optimal direction of the remanent flux density vector......, with respect to a linear objective functional. We illustrate the approach with results for magnet design problems from different areas, such as a permanent magnet electric motor, a beam focusing quadrupole magnet for particle accelerators and a rotary device for magnetic refrigeration....
Portfolio optimization and performance evaluation
DEFF Research Database (Denmark)
Juhl, Hans Jørn; Christensen, Michael
2013-01-01
Based on an exclusive business-to-business database comprising nearly 1,000 customers, the applicability of portfolio analysis is documented, and it is examined how such an optimization analysis can be used to explore the growth potential of a company. As opposed to any previous analyses, optimal...... customer portfolios are determined, and it is shown how marketing decision-makers can use this information in their marketing strategies to optimize the revenue growth of the company. Finally, our analysis is the first analysis which applies portfolio based methods to measure customer performance......, and it is shown how these performance measures complement the optimization analysis....
Optimization of well field management
DEFF Research Database (Denmark)
Hansen, Annette Kirstine
for optimizing well field man- agement using multi-objective optimization is developed. The optimization uses the Strength Pareto Evolutionary Algorithm 2 (SPEA2) to find the Pareto front be- tween the conflicting objectives. The Pareto front is a set of non-inferior optimal points and provides an important tool....... It is also possible to reduce the contamination risk if the distribution of the infiltrated water is changed, so that more water is infiltrated in the basins and less in the wells. However, if the waterworks want to be sure to avoid inflow of contaminated water it is necessary to increase the total amount...
Pro Android Apps Performance Optimization
Guihot, Hervé
2012-01-01
Today's Android apps developers are often running into the need to refine, improve and optimize their apps performances. As more complex apps can be created, it is even more important for developers to deal with this critical issue. Android allows developers to write apps using Java, C or a combination of both with the Android SDK and the Android NDK. Pro Android Apps Performance Optimization reveals how to fine-tune your Android apps, making them more stable and faster. In this book, you'll learn the following: * How to optimize your Java code with the SDK, but also how to write and optimize
Characteristics for Software Optimization Projects
Directory of Open Access Journals (Sweden)
Iulian NITESCU
2008-01-01
Full Text Available The increasing of the software systems complexity imposes the identification and implementation of some methods and techniques in order to manage it. The software optimization project is a way in which the software complexity is controlled. The software optimization project must face to the organization need to earn profit. The software optimization project is an integrated part of the application cycle because share same resources, depends on other stages and influences next phases. The optimization project has some particularities because it works on an finished product around its quality. The process is quality and performance oriented and it assumes that the product life cycle is almost finished.
Optimization methods for logical inference
Chandru, Vijay
2011-01-01
Merging logic and mathematics in deductive inference-an innovative, cutting-edge approach. Optimization methods for logical inference? Absolutely, say Vijay Chandru and John Hooker, two major contributors to this rapidly expanding field. And even though ""solving logical inference problems with optimization methods may seem a bit like eating sauerkraut with chopsticks. . . it is the mathematical structure of a problem that determines whether an optimization model can help solve it, not the context in which the problem occurs."" Presenting powerful, proven optimization techniques for logic in
Reactive Search and Intelligent Optimization
Battiti, Roberto; Mascia, Franco
2008-01-01
Reactive Search integrates sub-symbolic machine learning techniques into search heuristics for solving complex optimization problems. By automatically adjusting the working parameters, a reactive search self-tunes and adapts, effectively learning by doing until a solution is found. Intelligent Optimization, a superset of Reactive Search, concerns online and off-line schemes based on the use of memory, adaptation, incremental development of models, experimental algorithms applied to optimization, intelligent tuning and design of heuristics. Reactive Search and Intelligent Optimization is an exc
A Parallel Particle Swarm Optimizer
National Research Council Canada - National Science Library
Schutte, J. F; Fregly, B .J; Haftka, R. T; George, A. D
2003-01-01
.... Motivated by a computationally demanding biomechanical system identification problem, we introduce a parallel implementation of a stochastic population based global optimizer, the Particle Swarm...
Optimally cloned binary coherent states
Müller, C. R.; Leuchs, G.; Marquardt, Ch.; Andersen, U. L.
2017-10-01
Binary coherent state alphabets can be represented in a two-dimensional Hilbert space. We capitalize this formal connection between the otherwise distinct domains of qubits and continuous variable states to map binary phase-shift keyed coherent states onto the Bloch sphere and to derive their quantum-optimal clones. We analyze the Wigner function and the cumulants of the clones, and we conclude that optimal cloning of binary coherent states requires a nonlinearity above second order. We propose several practical and near-optimal cloning schemes and compare their cloning fidelity to the optimal cloner.
Chatterjee, Monish R.; Almehmadi, Fares S.
2014-03-01
In standard acousto-optic Bragg analysis, the incident light and sound beams are assumed to be uniform plane waves (with constant profiles) leading to the results based on standard weak interaction theory. As a follow-up to earlier work dealing with nonuniform incident optical beams, we revisit the problem of Bragg diffraction under nonuniform profiles, and include Gaussian, third-order Hermite-Gaussian, and zeroth-order Bessel profiles in our investigation, along with a few others. The first-order diffracted beam is examined (using a transfer function formalism based on angular spectra) under several parametric limits [such as the Klein-Cook parameter Q, the effective profile width, and the optical phase-shift parameter (α) in the sound cell]. Wherever feasible, the numerical results are compared with analytic theory. The scattered first-order profile output versus the optical phase-shift appears to maintain behavior similar to the known first-order characteristics (sin2 in intensity) encountered for the uniform incident beam case. It is observed, however, that such conformity exists seemingly only at relatively small values of Q (typically about 20 to 50). At higher Qs, on the other hand (where one would otherwise expect behavior closer to standard Bragg theory based on large Qs), it is found that the first-order intensity deviates substantially from the expected sin2- (or related) pattern. This deviation actually becomes more severe at even higher Qs. Additionally, the output profiles at higher Qs are also found to be distorted relative to the incident profiles. These results, though anomalous, are nevertheless generally compatible with earlier studies. Based on the transfer function theory, it is also known that for very large optical phase shifts (i.e., when α goes to infinity), the scattered first-order output for a Gaussian profile undergoes an axial (spatial) shift past the output plane of the sound cell. This predicted result is corroborated in our numerical simulation for both the Gaussian and third-order Hermite-Gaussian profiles, but not the zeroth-order Bessel or Airy profiles. These results provide both confirmation of some expected behavior for profiled beam scattering (including likely affirmation of the well known and unique diffractionless properties of certain Bessel beams), but also some insight into unexpected and anomalous photon-phonon interaction behavior.
Grande, A.; Fiorini, C.; Erdinger, F.; Fischer, P.; Porro, M.
2017-12-01
In this work we present the design and the experimental characterization of a front-end stage for X-ray pixel sensors. Our study was carried out in the framework of the DSSC detector development for the European XFEL (X-ray Free Electron Laser). The DSSC detector is going to be used in photon science applications at the European XFEL GmbH in Hamburg, Germany, and must be able to cope with an image frame rate up to 4.5 MHz. Moreover, the single photon sensitivity and a dynamic range up to 104 photons/pixel/pulse, with a photon energy of 1 keV, is required at the same time. Therefore, to achieve these requirement the front-end must provide a non-linear amplification. The non-linear response is obtained with a simple circuit that pushes the input PMOSFET into triode region as the input signal increases. However, since the readout ASIC has more than 4000 channels operating in parallel, particular care was devoted to the robustness of the implemented solution, especially with respect to power supply rejection ratio and crosstalk among channels.
2011-03-01
takeover from steam power and was refined again and again. Introductions such as the diesel engine in the 1920’s and compressors such as the...Inc. , 2002. [62] S. Zaloga, Unmanned Aerial Vehicles: Robotic Air Warfare 1917-2007. Westminster, MD: Osprey Publishing Ltd., 2008. [63] Richard
An introduction to the COLIN optimization interface.
Energy Technology Data Exchange (ETDEWEB)
Hart, William Eugene
2003-03-01
We describe COLIN, a Common Optimization Library INterface for C++. COLIN provides C++ template classes that define a generic interface for both optimization problems and optimization solvers. COLIN is specifically designed to facilitate the development of hybrid optimizers, for which one optimizer calls another to solve an optimization subproblem. We illustrate the capabilities of COLIN with an example of a memetic genetic programming solver.
Optimism and adaptation to multiple sclerosis: what does optimism mean?
Fournier, M.; Ridder, D. de; Bensing, J.
1999-01-01
The aim of the present study was to determine the meaning of optimism by explicating the dimensions underlying the notion and their links to adjusting to MS. Seventy-three patients responded to optimism questionnaires (i.e., the LOT, Generalized Self-Efficacy Scale) and outcome questionnaires. In
Optimism and Adaptation to Multiple Sclerosis: What Does Optimism Mean?
Fournier, M.; Ridder, D.T.D. de; Bensing, J.
1999-01-01
The aim of the present study was to determine the meaning of optimism by explicating the dimensions underlying the notion and their links to adjusting to MS. Seventy-three patients responded to optimism questionnaire s (i.e., the LOT, Generalized Self-Efficacy Scale) and outcome questionnaires.
Binary Cockroach Swarm Optimization for Combinatorial Optimization Problem
Directory of Open Access Journals (Sweden)
Ibidun Christiana Obagbuwa
2016-09-01
Full Text Available The Cockroach Swarm Optimization (CSO algorithm is inspired by cockroach social behavior. It is a simple and efficient meta-heuristic algorithm and has been applied to solve global optimization problems successfully. The original CSO algorithm and its variants operate mainly in continuous search space and cannot solve binary-coded optimization problems directly. Many optimization problems have their decision variables in binary. Binary Cockroach Swarm Optimization (BCSO is proposed in this paper to tackle such problems and was evaluated on the popular Traveling Salesman Problem (TSP, which is considered to be an NP-hard Combinatorial Optimization Problem (COP. A transfer function was employed to map a continuous search space CSO to binary search space. The performance of the proposed algorithm was tested firstly on benchmark functions through simulation studies and compared with the performance of existing binary particle swarm optimization and continuous space versions of CSO. The proposed BCSO was adapted to TSP and applied to a set of benchmark instances of symmetric TSP from the TSP library. The results of the proposed Binary Cockroach Swarm Optimization (BCSO algorithm on TSP were compared to other meta-heuristic algorithms.
On the efficiency of chaos optimization algorithms for global optimization
International Nuclear Information System (INIS)
Yang Dixiong; Li Gang; Cheng Gengdong
2007-01-01
Chaos optimization algorithms as a novel method of global optimization have attracted much attention, which were all based on Logistic map. However, we have noticed that the probability density function of the chaotic sequences derived from Logistic map is a Chebyshev-type one, which may affect the global searching capacity and computational efficiency of chaos optimization algorithms considerably. Considering the statistical property of the chaotic sequences of Logistic map and Kent map, the improved hybrid chaos-BFGS optimization algorithm and the Kent map based hybrid chaos-BFGS algorithm are proposed. Five typical nonlinear functions with multimodal characteristic are tested to compare the performance of five hybrid optimization algorithms, which are the conventional Logistic map based chaos-BFGS algorithm, improved Logistic map based chaos-BFGS algorithm, Kent map based chaos-BFGS algorithm, Monte Carlo-BFGS algorithm, mesh-BFGS algorithm. The computational performance of the five algorithms is compared, and the numerical results make us question the high efficiency of the chaos optimization algorithms claimed in some references. It is concluded that the efficiency of the hybrid optimization algorithms is influenced by the statistical property of chaotic/stochastic sequences generated from chaotic/stochastic algorithms, and the location of the global optimum of nonlinear functions. In addition, it is inappropriate to advocate the high efficiency of the global optimization algorithms only depending on several numerical examples of low-dimensional functions
Particle swarm optimization based optimal bidding strategy in an ...
African Journals Online (AJOL)
user
Test results indicate that the proposed algorithm outperforms the Genetic. Algorithm approach with respect to total profit and convergence time. Keywords: Electricity Market, Market Clearing Price (MCP), Optimal bidding strategy, Particle Swarm Optimization (PSO). DOI: http://dx.doi.org/10.4314/ijest.v3i6.23. 1. Introduction.
Directory of Open Access Journals (Sweden)
Oscar S. Silva Filho
1995-04-01
probability distribution function assumed as gaussian. Thus the problem studied here is a stochastic planning one with probabilistic constraint at the inventory level variable. It is shown that it is possible to obtain, by means of appropriate transformations, a deterministic equivalent formulation, for which an open-loop solution to stochastic problems can be generated, using any applicable mathematical programming algorithm. It is also shown that the uncertainties concerning demand fluctuation are explicitly presented in the deterministic formulation through a constraint function that represents the minimum inventory level limit or safety stock. This function is essentially concave and increases during time and depends on the variance of inventory level and probabilistic degree supply by the user to the inventory constraint. To illustrate the theoretical developments, a simple example of a single product system is proposed and solved by dynamic programming. The open- loop solution (i.e. approximate solution from an equivalent problem is compared with the true solution obtained directly from the stochastic problem via stochastic dynamic programming.
Ant colony search algorithm for optimal reactive power optimization
Directory of Open Access Journals (Sweden)
Lenin K.
2006-01-01
Full Text Available The paper presents an (ACSA Ant colony search Algorithm for Optimal Reactive Power Optimization and voltage control of power systems. ACSA is a new co-operative agents’ approach, which is inspired by the observation of the behavior of real ant colonies on the topic of ant trial formation and foraging methods. Hence, in the ACSA a set of co-operative agents called "Ants" co-operates to find good solution for Reactive Power Optimization problem. The ACSA is applied for optimal reactive power optimization is evaluated on standard IEEE, 30, 57, 191 (practical test bus system. The proposed approach is tested and compared to genetic algorithm (GA, Adaptive Genetic Algorithm (AGA.
Industrial cogeneration optimization program
Energy Technology Data Exchange (ETDEWEB)
1980-01-01
The purpose of this program was to identify up to 10 good near-term opportunities for cogeneration in 5 major energy-consuming industries which produce food, textiles, paper, chemicals, and refined petroleum; select, characterize, and optimize cogeneration systems for these identified opportunities to achieve maximum energy savings for minimum investment using currently available components of cogenerating systems; and to identify technical, institutional, and regulatory obstacles hindering the use of industrial cogeneration systems. The analysis methods used and results obtained are described. Plants with fuel demands from 100,000 Btu/h to 3 x 10/sup 6/ Btu/h were considered. It was concluded that the major impediments to industrial cogeneration are financial, e.g., high capital investment and high charges by electric utilities during short-term cogeneration facility outages. In the plants considered an average energy savings from cogeneration of 15 to 18% compared to separate generation of process steam and electric power was calculated. On a national basis for the 5 industries considered, this extrapolates to saving 1.3 to 1.6 quads per yr or between 630,000 to 750,000 bbl/d of oil. Properly applied, federal activity can do much to realize a substantial fraction of this potential by lowering the barriers to cogeneration and by stimulating wider implementation of this technology. (LCL)
Miller, Steven J
2017-01-01
Optimization Theory is an active area of research with numerous applications; many of the books are designed for engineering classes, and thus have an emphasis on problems from such fields. Covering much of the same material, there is less emphasis on coding and detailed applications as the intended audience is more mathematical. There are still several important problems discussed (especially scheduling problems), but there is more emphasis on theory and less on the nuts and bolts of coding. A constant theme of the text is the "why" and the "how" in the subject. Why are we able to do a calculation efficiently? How should we look at a problem? Extensive effort is made to motivate the mathematics and isolate how one can apply ideas/perspectives to a variety of problems. As many of the key algorithms in the subject require too much time or detail to analyze in a first course (such as the run-time of the Simplex Algorithm), there are numerous comparisons to simpler algorithms which students have either seen or c...
Sweeping Jet Optimization Studies
Melton, LaTunia Pack; Koklu, Mehti; Andino, Marlyn; Lin, John C.; Edelman, Louis
2016-01-01
Progress on experimental efforts to optimize sweeping jet actuators for active flow control (AFC) applications with large adverse pressure gradients is reported. Three sweeping jet actuator configurations, with the same orifice size but di?erent internal geometries, were installed on the flap shoulder of an unswept, NACA 0015 semi-span wing to investigate how the output produced by a sweeping jet interacts with the separated flow and the mechanisms by which the flow separation is controlled. For this experiment, the flow separation was generated by deflecting the wing's 30% chord trailing edge flap to produce an adverse pressure gradient. Steady and unsteady pressure data, Particle Image Velocimetry data, and force and moment data were acquired to assess the performance of the three actuator configurations. The actuator with the largest jet deflection angle, at the pressure ratios investigated, was the most efficient at controlling flow separation on the flap of the model. Oil flow visualization studies revealed that the flow field controlled by the sweeping jets was more three-dimensional than expected. The results presented also show that the actuator spacing was appropriate for the pressure ratios examined.
Optimizing Workflow Data Footprint
Directory of Open Access Journals (Sweden)
Gurmeet Singh
2007-01-01
Full Text Available In this paper we examine the issue of optimizing disk usage and scheduling large-scale scientific workflows onto distributed resources where the workflows are data-intensive, requiring large amounts of data storage, and the resources have limited storage resources. Our approach is two-fold: we minimize the amount of space a workflow requires during execution by removing data files at runtime when they are no longer needed and we demonstrate that workflows may have to be restructured to reduce the overall data footprint of the workflow. We show the results of our data management and workflow restructuring solutions using a Laser Interferometer Gravitational-Wave Observatory (LIGO application and an astronomy application, Montage, running on a large-scale production grid-the Open Science Grid. We show that although reducing the data footprint of Montage by 48% can be achieved with dynamic data cleanup techniques, LIGO Scientific Collaboration workflows require additional restructuring to achieve a 56% reduction in data space usage. We also examine the cost of the workflow restructuring in terms of the application's runtime.
Simonsen, I.; Jensen, M. H.; Johansen, A.
2002-06-01
In stochastic finance, one traditionally considers the return as a competitive measure of an asset, i.e., the profit generated by that asset after some fixed time span Δt, say one week or one year. This measures how well (or how bad) the asset performs over that given period of time. It has been established that the distribution of returns exhibits ``fat tails'' indicating that large returns occur more frequently than what is expected from standard Gaussian stochastic processes [1-3]. Instead of estimating this ``fat tail'' distribution of returns, we propose here an alternative approach, which is outlined by addressing the following question: What is the smallest time interval needed for an asset to cross a fixed return level of say 10%? For a particular asset, we refer to this time as the investment horizon and the corresponding distribution as the investment horizon distribution. This latter distribution complements that of returns and provides new and possibly crucial information for portfolio design and risk-management, as well as for pricing of more exotic options. By considering historical financial data, exemplified by the Dow Jones Industrial Average, we obtain a novel set of probability distributions for the investment horizons which can be used to estimate the optimal investment horizon for a stock or a future contract.
Optimal Portfolio Choice with Annuitization
Koijen, R.S.J.; Nijman, T.E.; Werker, B.J.M.
2006-01-01
We study the optimal consumption and portfolio choice problem over an individual's life-cycle taking into account annuity risk at retirement. Optimally, the investor allocates wealth at retirement to nominal, inflation-linked, and variable annuities and conditions this choice on the state of the
Quantum information and convex optimization
Energy Technology Data Exchange (ETDEWEB)
Reimpell, Michael
2008-07-01
This thesis is concerned with convex optimization problems in quantum information theory. It features an iterative algorithm for optimal quantum error correcting codes, a postprocessing method for incomplete tomography data, a method to estimate the amount of entanglement in witness experiments, and it gives necessary and sufficient criteria for the existence of retrodiction strategies for a generalized mean king problem. (orig.)
Chordal Graphs and Semidefinite Optimization
DEFF Research Database (Denmark)
Vandenberghe, Lieven; Andersen, Martin Skovgaard
2015-01-01
Chordal graphs play a central role in techniques for exploiting sparsity in large semidefinite optimization problems and in related con-vex optimization problems involving sparse positive semidefinite matrices. Chordal graph properties are also fundamental to several classical results in combinat...
OPTIMIZATION OF AEOLIAN ENERGY CONVERSION ...
African Journals Online (AJOL)
30 juin 2010 ... turbine at optimum speed which corresponds to the maximum power provided by the steady wind turbine. To this end, the object is to preserve the position of any static operating point on the characteristic of optimal. To validate the model and algorithm for optimal conversion of wind energy, a series of.
Polyhedral Techniques in Combinatorial Optimization
Aardal, K.I.; van Hoesel, S.
1995-01-01
Combinatorial optimization problems arise in several areas ranging from management to mathematics and graph theory. Most combinatorial optimization problems are compu- tationally hard due to the restriction that a subset of the variables have to take integral values. During the last two decades
Optimizing product lines and assortments
Rooderkerk, R.P.
2007-01-01
How should manufacturers and retailers optimize the sets of products they offer? Increasing product proliferation forces firms to solve these complex optimization problems ever more frequently. While the existing literature has made some headway in solving these problems, the three essays in this
Quantum information and convex optimization
International Nuclear Information System (INIS)
Reimpell, Michael
2008-01-01
This thesis is concerned with convex optimization problems in quantum information theory. It features an iterative algorithm for optimal quantum error correcting codes, a postprocessing method for incomplete tomography data, a method to estimate the amount of entanglement in witness experiments, and it gives necessary and sufficient criteria for the existence of retrodiction strategies for a generalized mean king problem. (orig.)
Structural Topology Optimization with Eigenvalues
Czech Academy of Sciences Publication Activity Database
Achtziger, W.; Kočvara, Michal
2007-01-01
Roč. 18, č. 4 (2007), s. 1129-1164 ISSN 1052-6234 R&D Projects: GA AV ČR IAA1075402 Institutional research plan: CEZ:AV0Z10750506 Keywords : Topology optimization * Vibration of structures * Optimization of Eigenvalues Subject RIV: BA - General Mathematics Impact factor: 1.554, year: 2007
Design of an Optimal Biorefinery
DEFF Research Database (Denmark)
Nawaz, Muhammad; Zondervan, Edwin; Woodley, John
2011-01-01
In this paper we propose a biorefinery optimization model that can be used to find the optimal processing route for the production of ethanol, butanol, succinic acid and blends of these chemicals with fossil fuel based gasoline. The approach unites transshipment models with a superstructure...
Conceptual optimal design of jackets
DEFF Research Database (Denmark)
Sandal, Kasper; Verbart, Alexander; Stolpe, Mathias
Structural optimization can explore a large design space (400 jackets) in a short time (2 hours), and thus lead to better conceptual jacket designs.......Structural optimization can explore a large design space (400 jackets) in a short time (2 hours), and thus lead to better conceptual jacket designs....
Accelerating ROP detector layout optimization
International Nuclear Information System (INIS)
Kastanya, D.; Fodor, B.
2012-01-01
The ADORE (Alternating Detector layout Optimization for REgional overpower protection system) algorithm for performing the optimization of regional overpower protection (ROP) system for CANDU® reactors have been recently developed. The simulated annealing (SA) stochastic optimization technique is utilized to come up with a quasi optimized detector layout for the ROP systems. Within each simulated annealing history, the objective function is calculated as a function of the trip set point (TSP) corresponding to the detector layout for that particular history. The evaluation of the TSP is done probabilistically using the ROVER-F code. Since during each optimization execution thousands of candidate detector layouts are evaluated, the overall optimization process is time consuming. Since for each ROVER-F evaluation the number of fuelling ripples controls the execution time, reducing the number of fuelling ripples used during the calculation of TSP will reduce the overall optimization execution time. This approach has been investigated and the results are presented in this paper. The challenge is to construct a set of representative fuelling ripples which will significantly speedup the optimization process while guaranteeing that the resulting detector layout has similar quality to the ones produced when the complete set of fuelling ripples is employed. Results presented in this paper indicate that a speedup of up to around 40 times is attainable when this approach is utilized. (author)
Sensitivity analysis in dynamic optimization
Evers, A.H.
1980-01-01
To find the optimal control of chemical processes, Pontryagin's minimum principle can be used. In practice, however, one is not only interested in the optimal solution, which satisfies the restrictions on the control, the initial and terminal conditions, and the process parameters. It is also
A Problem on Optimal Transportation
Cechlarova, Katarina
2005-01-01
Mathematical optimization problems are not typical in the classical curriculum of mathematics. In this paper we show how several generalizations of an easy problem on optimal transportation were solved by gifted secondary school pupils in a correspondence mathematical seminar, how they can be used in university courses of linear programming and…