WorldWideScience

Sample records for extreme-ultraviolet imaging telescope

  1. EIT: Solar corona synoptic observations from SOHO with an Extreme-ultraviolet Imaging Telescope

    Science.gov (United States)

    Delaboudiniere, J. P.; Gabriel, A. H.; Artzner, G. E.; Michels, D. J.; Dere, K. P.; Howard, R. A.; Catura, R.; Stern, R.; Lemen, J.; Neupert, W.

    1988-01-01

    The Extreme-ultraviolet Imaging Telescope (EIT) of SOHO (solar and heliospheric observatory) will provide full disk images in emission lines formed at temperatures that map solar structures ranging from the chromospheric network to the hot magnetically confined plasma in the corona. Images in four narrow bandpasses will be obtained using normal incidence multilayered optics deposited on quadrants of a Ritchey-Chretien telescope. The EIT is capable of providing a uniform one arc second resolution over its entire 50 by 50 arc min field of view. Data from the EIT will be extremely valuable for identifying and interpreting the spatial and temperature fine structures of the solar atmosphere. Temporal analysis will provide information on the stability of these structures and identify dynamical processes. EIT images, issued daily, will provide the global corona context for aid in unifying the investigations and in forming the observing plans for SOHO coronal instruments.

  2. The Extreme Ultraviolet Imagers (EUVIs): Earth-observing telescopes on International Space Station

    Science.gov (United States)

    Uji, Kentaro; Yoshikawa, Ichiro; Yoshioka, Kazuo; Murakami, Go; Yamazaki, Atsushi

    2012-11-01

    The Extreme Ultraviolet Imagers (EUVIs) were launched on 21st July 2012 as payloads to the Exposed Facility of the Japanese Experiment Module (JEM-EF) on the International Space Station. The EUVIs are parts of the IMAP (Ionosphere, Mesosphere, upper Atmosphere, and Plasmasphere mapping) mission to observe the Earth's upper atmosphere, mesosphere, ionosphere, thermosphere and plasmasphere. The other part of IMAP is a visible and near-infrared spectral imager (VISI). In this mission, we install two independent and identical telescopes. One telescope detects the terrestrial EUV emission from O+ (at the wavelength of 83.4 nm), and the other one detects He+ (30.4 nm). At the altitude of approximately 400 km, the two telescopes direct towards the Earth's limb to look at the ionosphere and plasmasphere from the inside-out. The maximum spatial resolution is 0.1° and time resolution is 1 minute. The optical instruments consist of multilayer coated mirrors which are optimized for 30.4 nm, metallic thin filters and 5-stage microchannel plates to pick up photon events efficiently. In our presentation, we report the mission overview, the instruments and the result of ground calibrations.

  3. Imaging characteristics of the Extreme Ultraviolet Explorer microchannel plate detectors

    Science.gov (United States)

    Vallerga, J. V.; Kaplan, G. C.; Siegmund, O. H. W.; Lampton, M.; Malina, R. F.

    1989-01-01

    The Extreme Ultraviolet Explorer (EUVE) satellite will conduct an all-sky survey over the wavelength range from 70 A to 760 A using four grazing-incidence telescopes and seven microchannel-plate (MCP) detectors. The imaging photon-counting MCP detectors have active areas of 19.6 cm2. Photon arrival position is determined using a wedge-and-strip anode and associated pulse-encoding electronics. The imaging characteristics of the EUVE flight detectors are presented including image distortion, flat-field response, and spatial differential nonlinearity. Also included is a detailed discussion of image distortions due to the detector mechanical assembly, the wedge-and-strip anode, and the electronics. Model predictions of these distortions are compared to preflight calibration images which show distortions less than 1.3 percent rms of the detector diameter of 50 mm before correction. The plans for correcting these residual detector image distortions to less than 0.1 percent rms are also presented.

  4. Line image sensors for spectroscopic applications in the extreme ultraviolet

    Science.gov (United States)

    Banyay, Matus; Brose, Sascha; Juschkin, Larissa

    2009-10-01

    The spectral range of extreme ultraviolet radiation (XUV or EUV) is an active area of research incorporating many scientific fields such as microscopy, lithography or reflectometry. During the last decade, a lot of effort has been put into transferring many of the known techniques developed at linear accelerators into the laboratory using discharge-produced plasmas (DPPs) or laser-produced plasmas (LPPs) as an alternative light source. In particular, the semiconductor industry is in need of on-site tools in the shorter wavelength range for production and inspection of structured surfaces with nanometer resolution. Here traditional charge coupled device (CCD) image sensors are inapplicable as detectors because of the strong absorption of XUV by matter prohibiting any generation of electron-hole pairs inside a deep lying p-n junction. As a solution, two-dimensional backthinned CCDs are available in the market offering high sensitivity to XUV light. Although for many applications a one-dimensional line scanning image sensor would be sufficient, they are non-existent for XUV. It is only lately that manufacturers have started to adopt the principle of backthinning to CCD line sensors to enhance sensitivity in the long wavelength UV range (>200 nm). Here we show that generally these compact sensors offer good quantum efficiencies in the XUV which make them a candidate for many spectroscopic applications and future industrial inline inspection tools for which costly two-dimensional CCDs are oversized. We have successfully implemented a compact sensor device into a laboratory XUV spectrometer and reflectometer. Our measurements compare the quantum efficiency of a state-of-the-art XUV array CCD to a phosphor-coated line sensor and a new backthinned line sensor. Additionally, we show recorded spectra from a laboratory DPP source to demonstrate the potential of a wide range of applications.

  5. Design and performance of the telescope and detector covers on the Extreme Ultraviolet Explorer satellite

    Science.gov (United States)

    Tom, James L.

    1994-01-01

    Two cover mechanisms were designed and developed for the Extreme Ultraviolet Explorer (EUVE) science payload to keep the EUVE telescope mirrors and detectors sealed from the atmospheric environment until the spacecraft was placed into orbit. There were four telescope front covers and seven motorized detector covers on the EUVE science payload. The EUVE satellite was launched into orbit in June 1992 and all the covers operated successfully after launch. This success can be attributed to high design margins and extensive testing at each level of assembly. This paper described the design of the telescope front covers and the motorized detector covers. This paper also discusses some of the many design considerations and modifications made as performance and reliability problems became apparent from each phase of testing.

  6. NRL-ATM extreme ultraviolet solar image TV monitor flown on Skylab

    Science.gov (United States)

    Crockett, W. R.; Purcell, J. D.; Schumacher, R. J.; Tousey, R.; Patterson, N. P.

    1977-01-01

    An instrument for recording extreme ultraviolet television images of the sun was flown in the Apollo Telescope Mount on Skylab. Solar radiation in the 171-630 A wavelength range, defined by the transmission band of three thin-film aluminum filters, was focused onto a p-quaterphenyl photon conversion layer by a platinum-coated mirror at normal incidence. The conversion layer was attached to the faceplate of a low light level SEC vidicon. An onboard video monitor enabled the Skylab crews to observe the images in real-time and to identify and follow the development of solar features. Images were also transmitted to the mission control center, where they were used in planning the ATM observing schedule.

  7. Soft X ray/extreme ultraviolet images of the solar atmosphere with normal incidence multilayer optics

    Science.gov (United States)

    Lindblom, Joakim Fredrik

    The first high resolution Soft X-Ray/Extreme Ultraviolet (XUV) images of the Sun with normal incidence multilayer optics were obtained by the Standford/MSFC Rocket X-Ray Spectroheliograph on 23 Oct. 1987. Numerous images at selected wavelengths from 8 to 256 A were obtained simultaneously by the diverse array of telescopes flown on-board the experiment. These telescopes included single reflection normal incidence multilayer systems (Herschelian), double reflection multilayer systems (Cassegrain), a grazing incidence mirror system (Wolter-Schwarzschild), and hybrid systems using normal incidence multilayer optics in conjunction with the grazing incidence primary (Wolter-Cassegrain). Filters comprised of approximately 1700 A thick aluminum supported on a nickel mesh were used to transmit the soft x ray/EUV radiation while preventing the intense visible light emission of the Sun from fogging the sensitive experimental T-grain photographic emulsions. These systems yielded high resolution soft x ray/EUV images of the solar corona and transition region, which reveal magnetically confined loops of hot solar plasma, coronal plumes, polar coronal holes, supergranulation, and features associated with overlying cool prominences. The development, testing, and operation of the experiments, and the results from the flight are described. The development of a second generation experiment, the Multi-Spectral Solar Telescope Array, which is scheduled to fly in the summer of 1990, and a recently approved Space Station experiment, the Ultra-High Resolution XUV Spectroheliograph, which is scheduled to fly in 1996 are also described.

  8. Reflective optical imaging system for extreme ultraviolet wavelengths

    Science.gov (United States)

    Viswanathan, V.K.; Newnam, B.E.

    1993-05-18

    A projection reflection optical system has two mirrors in a coaxial, four reflection configuration to reproduce the image of an object. The mirrors have spherical reflection surfaces to provide a very high resolution of object feature wavelengths less than 200 [mu]m, and preferably less than 100 [mu]m. An image resolution of features less than 0.05-0.1 [mu]m, is obtained over a large area field; i.e., 25.4 mm [times] 25.4 mm, with a distortion less than 0.1 of the resolution over the image field.

  9. A Compact Extreme Ultraviolet Imager (C-EUVI) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to evaluate the Intevac Photonics NightVista® M711 Low Light Level Camera as the baseline detector of a new Compact EUV imager (C–EUVI). ...

  10. POINT-SPREAD FUNCTIONS FOR THE EXTREME-ULTRAVIOLET CHANNELS OF SDO/AIA TELESCOPES

    Energy Technology Data Exchange (ETDEWEB)

    Poduval, B.; DeForest, C. E. [Southwest Research Institute, 1050 Walnut Street, Suite 300, Boulder, CO 80302 (United States); Schmelz, J. T.; Pathak, S., E-mail: bala@boulder.swri.edu [Physics Department, University of Memphis, Memphis, TN 38152 (United States)

    2013-03-10

    We present the stray-light point-spread functions (PSFs) and their inverses we characterized for the Atmospheric Imaging Assembly (AIA) EUV telescopes on board the Solar Dynamics Observatory (SDO) spacecraft. The inverse kernels are approximate inverses under convolution. Convolving the original Level 1 images with them produces images with improved stray-light characteristics. We demonstrate the usefulness of these PSFs by applying them to two specific cases: photometry and differential emission measure (DEM) analysis. The PSFs consist of a narrow Gaussian core, a diffraction component, and a diffuse component represented by the sum of a Gaussian-truncated Lorentzian and a shoulder Gaussian. We determined the diffraction term using the measured geometry of the diffraction pattern identified in flare images and the theoretically computed intensities of the principal maxima of the first few diffraction orders. To determine the diffuse component, we fitted its parameterized model using iterative forward-modeling of the lunar interior in the SDO/AIA images from the 2011 March 4 lunar transit. We find that deconvolution significantly improves the contrast in dark features such as miniature coronal holes, though the effect was marginal in bright features. On a percentage-scattering basis, the PSFs for SDO/AIA are better by a factor of two than that of the EUV telescope on board the Transition Region And Coronal Explorer mission. A preliminary analysis suggests that deconvolution alone does not affect DEM analysis of small coronal loop segments with suitable background subtraction. We include the derived PSFs and their inverses as supplementary digital materials.

  11. Tabletop Nanometer Extreme Ultraviolet Imaging in an Extended Reflection Mode using Coherent Fresnel Ptychography

    CERN Document Server

    Seaberg, Matthew D; Gardner, Dennis F; Shanblatt, Elisabeth R; Murnane, Margaret M; Kapteyn, Henry C; Adams, Daniel E

    2013-01-01

    We demonstrate high resolution extreme ultraviolet (EUV) coherent diffractive imaging in the most general reflection geometry by combining ptychography with tilted plane correction. This method makes it possible to image extended surfaces at any angle of incidence. Refocused light from a tabletop coherent high harmonic light source at 29 nm illuminates a nanopatterned surface at 45 degree angle of incidence. The reconstructed image contains quantitative amplitude and phase (in this case pattern height) information, comparing favorably with both scanning electron microscope and atomic force microscopy images. In the future, this approach will enable imaging of complex surfaces and nanostructures with sub-10 nm-spatial resolution and fs-temporal resolution, which will impact a broad range of nanoscience and nanotechnology including for direct application in actinic inspection in support of EUV lithography.

  12. Extreme ultraviolet imaging of three-dimensional magnetic reconnection in a solar eruption.

    Science.gov (United States)

    Sun, J Q; Cheng, X; Ding, M D; Guo, Y; Priest, E R; Parnell, C E; Edwards, S J; Zhang, J; Chen, P F; Fang, C

    2015-06-26

    Magnetic reconnection, a change of magnetic field connectivity, is a fundamental physical process in which magnetic energy is released explosively, and it is responsible for various eruptive phenomena in the universe. However, this process is difficult to observe directly. Here, the magnetic topology associated with a solar reconnection event is studied in three dimensions using the combined perspectives of two spacecraft. The sequence of extreme ultraviolet images clearly shows that two groups of oppositely directed and non-coplanar magnetic loops gradually approach each other, forming a separator or quasi-separator and then reconnecting. The plasma near the reconnection site is subsequently heated from ∼1 to ≥5 MK. Shortly afterwards, warm flare loops (∼3 MK) appear underneath the hot plasma. Other observational signatures of reconnection, including plasma inflows and downflows, are unambiguously revealed and quantitatively measured. These observations provide direct evidence of magnetic reconnection in a three-dimensional configuration and reveal its origin.

  13. SiC/Tb and Si/Tb multilayer coatings for extreme ultraviolet solar imaging.

    Science.gov (United States)

    Kjornrattanawanich, Benjawan; Windt, David L; Seely, John F; Uspenskii, Yurii A

    2006-03-10

    Narrowband SiC/Tb and Si/Tb multilayers are fabricated with as much as a 23% normal-incidence reflectance near a 60 nm wavelength and spectral bandpass (FWHM) values of 9.4 and 6.5 nm, respectively. The structural properties of the films are investigated using extreme ultraviolet and x-ray reflectometry and transmission electron microscopy. Thermal stability is investigated in films annealed to as high as 300 degrees C. Because of their superior thermal stability, relatively high reflectance, and narrower spectral bandpass, Si/Tb multilayers are identified as optimal candidates for solar physics imaging applications, where the peak response can be tuned to important emission lines such as O v near 63.0 nm and Mg x near 61.0 nm. We describe our experimental procedures and results, discuss the implications of our findings, and outline prospects for improved performance.

  14. Extreme Ultraviolet Imaging of Three-dimensional Magnetic Reconnection in a Solar Eruption

    CERN Document Server

    Sun, J Q; Ding, M D; Guo, Y; Priest, E R; Parnell, C E; Edwards, S J; Zhang, J; Chen, P F; Fang, C

    2015-01-01

    Magnetic reconnection, a change of magnetic field connectivity, is a fundamental physical process in which magnetic energy is released explosively. It is responsible for various eruptive phenomena in the universe. However, this process is difficult to observe directly. Here, the magnetic topology associated with a solar reconnection event is studied in three dimensions (3D) using the combined perspectives of two spacecraft. The sequence of extreme ultraviolet (EUV) images clearly shows that two groups of oppositely directed and non-coplanar magnetic loops gradually approach each other, forming a separator or quasi-separator and then reconnecting. The plasma near the reconnection site is subsequently heated from $\\sim$1 to $\\ge$5 MK. Shortly afterwards, warm flare loops ($\\sim$3 MK) appear underneath the hot plasma. Other observational signatures of reconnection, including plasma inflows and downflows, are unambiguously revealed and quantitatively measured. These observations provide direct evidence of magneti...

  15. Scanning coherent diffractive imaging methods for actinic extreme ultraviolet mask metrology

    Science.gov (United States)

    Helfenstein, Patrick; Mohacsi, Istvan; Rajeev, Rajendran; Ekinci, Yasin

    2016-07-01

    For the successful implementation of extreme ultraviolet (EUV) lithography in the upcoming technology nodes, a major challenge to overcome is the stable and reliable detection and characterization of mask defects. We have recently presented a reflective mode EUV mask scanning lensless imaging tool (RESCAN) which was installed at the XIL-II beamline of the swiss light source and showed reconstructed aerial images of test patterns on EUV masks. RESCAN uses scanning coherent diffractive imaging (SCDI) methods to obtain actinic aerial images of EUV photomasks and was designed for 80 nm onmask resolution. Our SCDI algorithm reconstructs the measured sample by iteratively solving the phase problem using overdetermined diffraction data gathered by scanning across the specimen with a finite illumination. It provides the phase and amplitude aerial images of EUV photomasks with high resolution without the need to use high numerical aperture (NA) lenses. Contrary to scanning microscopy and full-field microscopy, where the resolution is limited by the spot size or NA of the lens, the achievable resolution with our method depends on the detector noise and NA of the detector. To increase the resolution of our tool, we upgraded RESCAN with a detector and algorithms. Here, we present the results obtained with the tool that is capable of up to 40-nm onmask resolution. We believe that the realization of our prototype marks a significant step toward overcoming the limitations imposed by methods relying on imaging optics and shows a viable solution for actinic mask metrology.

  16. Hinode/Extreme-Ultraviolet Imaging Spectrometer Observations of the Temperature Structure of the Quiet Corona

    CERN Document Server

    Brooks, David H; Williams, David R; Watanabe, Tetsuya

    2009-01-01

    We present a Differential Emission Measure (DEM) analysis of the quiet solar corona on disk using data obtained by the Extreme-ultraviolet Imaging Spectrometer (EIS) on Hinode. We show that the expected quiet Sun DEM distribution can be recovered from judiciously selected lines, and that their average intensities can be reproduced to within 30%. We present a subset of these selected lines spanning the temperature range log T = 5.6 to 6.4 K that can be used to derive the DEM distribution reliably, including a subset of Iron lines that can be used to derive the DEM distribution free of the possibility of uncertainties in the elemental abundances. The subset can be used without the need for extensive measurements and the observed intensities can be reproduced to within the estimated uncertainty in the pre-launch calibration of EIS. Furthermore, using this subset, we also demonstrate that the quiet coronal DEM distribution can be recovered on size scales down to the spatial resolution of the instrument (1" pixels...

  17. Extreme ultraviolet (EUV) and FUV calibration facility for special sensor ultraviolet limb imager (SSULI)

    Science.gov (United States)

    Boyer, Craig N.; Osterman, Steven N.; Thonnard, Stefan E.; McCoy, Robert P.; Williams, J. Z.; Parker, S. E.

    1994-09-01

    A facility for calibrating far ultraviolet and extreme ultraviolet instruments has recently been completed at the Naval Research Laboratory. Our vacuum calibration vessel is 2-m in length, 1.67-m in diameter, and can accommodate optical test benches up to 1.2-m wide by 1.5-m in length. A kinematically positioned frame with four axis precision pointing capability of 10 microns for linear translation and .01 degrees for rotation is presently used during vacuum optical calibration of SSULI. The chamber was fabricated from 304 stainless steel and polished internally to reduce surface outgassing. A dust-free environment is maintained at the rear of the vacuum chamber by enclosing the 2-m hinged vacuum access door in an 8 ft. by 8 ft. class 100 clean room. Every effort was made to obtain an oil-free environment within the vacuum vessel. Outgassing products are continually monitored with a 1 - 200 amu residual gas analyzer. An oil-free claw and vane pump evacuates the chamber to 10-2 torr through 4 in. diameter stainless steel roughing lines. High vacuum is achieved and maintained with a magnetically levitated 480 l/s turbo pump and a 3000 l/s He4 cryopump. Either of two vacuum monochrometers, a 1-m f/10.4 or a 0.2-m f/4.5 are coaxially aligned with the optical axis of the chamber and are used to select single UV atomic resonance lines from a windowless capillary or penning discharge UV light source. A calibrated channeltron detector is coaxially mounted with the SSULI detector during calibration. All vacuum valves, the cooling system for the cryopump compressor, and the roughing pump are controlled through optical fibers which are interfaced to a computer through a VME board. Optical fibers were chosen to ensure that complete electrical isolation is maintained between the computer and the vacuum system valves-solenoids and relays.

  18. High-space resolution imaging plate analysis of extreme ultraviolet (EUV) light from tin laser-produced plasmas.

    Science.gov (United States)

    Musgrave, Christopher S A; Murakami, Takehiro; Ugomori, Teruyuki; Yoshida, Kensuke; Fujioka, Shinsuke; Nishimura, Hiroaki; Atarashi, Hironori; Iyoda, Tomokazu; Nagai, Keiji

    2017-03-01

    With the advent of high volume manufacturing capabilities by extreme ultraviolet lithography, constant improvements in light source design and cost-efficiency are required. Currently, light intensity and conversion efficiency (CE) measurments are obtained by charged couple devices, faraday cups etc, but also phoshpor imaging plates (IPs) (BaFBr:Eu). IPs are sensitive to light and high-energy species, which is ideal for studying extreme ultraviolet (EUV) light from laser produced plasmas (LPPs). In this work, we used IPs to observe a large angular distribution (10°-90°). We ablated a tin target by high-energy lasers (1064 nm Nd:YAG, 10(10) and 10(11) W/cm(2)) to generate the EUV light. The europium ions in the IP were trapped in a higher energy state from exposure to EUV light and high-energy species. The light intensity was angular dependent; therefore excitation of the IP depends on the angle, and so highly informative about the LPP. We obtained high-space resolution (345 μm, 0.2°) angular distribution and grazing spectrometer (5-20 nm grate) data simultaneously at different target to IP distances (103 mm and 200 mm). Two laser systems and IP types (BAS-TR and BAS-SR) were also compared. The cosine fitting values from the IP data were used to calculate the CE to be 1.6% (SD ± 0.2) at 13.5 nm 2% bandwidth. Finally, a practical assessment of IPs and a damage issue are disclosed.

  19. High-space resolution imaging plate analysis of extreme ultraviolet (EUV) light from tin laser-produced plasmas

    Science.gov (United States)

    Musgrave, Christopher S. A.; Murakami, Takehiro; Ugomori, Teruyuki; Yoshida, Kensuke; Fujioka, Shinsuke; Nishimura, Hiroaki; Atarashi, Hironori; Iyoda, Tomokazu; Nagai, Keiji

    2017-03-01

    With the advent of high volume manufacturing capabilities by extreme ultraviolet lithography, constant improvements in light source design and cost-efficiency are required. Currently, light intensity and conversion efficiency (CE) measurments are obtained by charged couple devices, faraday cups etc, but also phoshpor imaging plates (IPs) (BaFBr:Eu). IPs are sensitive to light and high-energy species, which is ideal for studying extreme ultraviolet (EUV) light from laser produced plasmas (LPPs). In this work, we used IPs to observe a large angular distribution (10°-90°). We ablated a tin target by high-energy lasers (1064 nm Nd:YAG, 1010 and 1011 W/cm2) to generate the EUV light. The europium ions in the IP were trapped in a higher energy state from exposure to EUV light and high-energy species. The light intensity was angular dependent; therefore excitation of the IP depends on the angle, and so highly informative about the LPP. We obtained high-space resolution (345 μm, 0.2°) angular distribution and grazing spectrometer (5-20 nm grate) data simultaneously at different target to IP distances (103 mm and 200 mm). Two laser systems and IP types (BAS-TR and BAS-SR) were also compared. The cosine fitting values from the IP data were used to calculate the CE to be 1.6% (SD ± 0.2) at 13.5 nm 2% bandwidth. Finally, a practical assessment of IPs and a damage issue are disclosed.

  20. Extreme ultraviolet and soft X-ray imaging with compact, table top laser plasma EUV and SXR sources

    Science.gov (United States)

    Wachulak, P. W.; Bartnik, A.; Kostecki, J.; Wegrzynski, L.; Fok, T.; Jarocki, R.; Szczurek, M.; Fiedorowicz, H.

    2015-12-01

    We present a few examples of imaging experiments, which were possible using a compact laser-plasma extreme ultraviolet (EUV) and soft X-ray (SXR) source, based on a double stream gas puff target. This debris-free source was used in full-field EUV imaging to obtain magnified images of test samples, ZnO nanofibers and images of the membranes coated with salt crystals. The source was also employed for SXR microscopy in the "water-window" spectral range using grazing incidence Wolter type-I objective to image test samples and to perform the initial studies of biological objects. Gas puff target EUV source, spectrally tuned for 13.5 nm wavelength with multilayer mirror and thin film filters, was also used in variety of shadowgraphy experiments to study the density of newly developed modulated density gas puff targets. Finally, the source was also employed in EUV tomography experiments of low density objects with the goal to measure and optimize the density of the targets dedicated to high harmonic generation.

  1. Extreme ultraviolet mask defect inspection with a half pitch 16-nm node using simulated projection electron microscope images

    Science.gov (United States)

    Iida, Susumu; Amano, Tsuyoshi; Hirano, Ryoichi; Terasawa, Tsuneo; Watanabe, Hidehiro

    2013-04-01

    According to an International Technology Roadmap for Semiconductors (ITRS-2012) update, the sensitivity requirement for an extreme ultraviolet (EUV) mask pattern inspection system is to be less than 18 nm for half pitch (hp) 16-nm node devices. The inspection sensitivity of extrusion and intrusion defects on hp 64-nm line-and-space patterned EUV mask were investigated using simulated projection electron microscope (PEM) images. The obtained defect images showed that the optimization of current density and image processing techniques were essential for the detection of defects. Extrusion and intrusion defects 16 nm in size were detected on images formed by 3000 electrons per pixel. The landing energy also greatly influenced the defect detection efficiency. These influences were different for extrusion and intrusion defects. These results were in good agreement with experimentally obtained yield curves of the mask materials and the elevation angles of the defects. These results suggest that the PEM technique has a potential to detect 16-nm size defects on an hp 64-nm patterned EUV mask.

  2. Nanoscale imaging with table-top coherent extreme ultraviolet source based on high harmonic generation

    Science.gov (United States)

    Ba Dinh, Khuong; Le, Hoang Vu; Hannaford, Peter; Van Dao, Lap

    2017-08-01

    A table-top coherent diffractive imaging experiment on a sample with biological-like characteristics using a focused narrow-bandwidth high harmonic source around 30 nm is performed. An approach involving a beam stop and a new reconstruction algorithm to enhance the quality of reconstructed the image is described.

  3. Segmentation of extreme ultraviolet (SOHO) Sun images by means of watershed and region merging

    Science.gov (United States)

    Nieniewski, Mariusz

    2002-06-01

    The paper presents a new method of segmentation of Extreme UV images, which is based on the use of the watershed algoritm. The result of the watershed takes form of a partition of the whole image into a large number of segments. Some of these segments are then merged into larger regions representing meaningful objects, such as coronal holes. The proposed method of region merging finds the maximum of the average contrast between the current region and its boundary defined as a collection of watershed segments coming to touch with this region. The maximization of the average contrast gives the results which are in agreement with human intuition. Furthermore, this approach allows one to conduct the segmentation of the sun images almost independently of any tuning parameters. Tests of the method on such images taken at various levels of sun's activity showed that the method can be used independently of the local brightness level and the extent of the coronal holes.

  4. Extreme ultraviolet radiation for coherent diffractive imaging with high spatial resolution

    Institute of Scientific and Technical Information of China (English)

    L.V.; DAO; S.; TEICHMANN; B.; CHEN; R.A.; DILANIAN; K.B.; DINH; P.; HANNAFORD

    2010-01-01

    Using different noble gases,argon,neon and helium,we are able to generate by high-harmonic generation(HHG) just a few harmonic orders in the spectral range 10-35 nm with a photon flux of~2.10 12 photons/(harmonic cm2 s) for argon and~10 10 photons/(harmonic cm2 s) for helium. The few-harmonic-order radiation is used for coherent diffractive imaging directly without any spectral filter. A spatial resolution of~100 nm is achieved using a~30 nm HHG source.

  5. Design of Optical System for Solar Extreme-Ultraviolet Imaging Spectrometer%太阳极紫外成像光谱仪光学系统设计

    Institute of Scientific and Technical Information of China (English)

    刘壮; 巩岩

    2012-01-01

    Hyper-spectral imaging observation of the sun in the EUV region is an important method of research for solar's upper transition region, corona and plasma's physical property. Based on the application objective of solar extreme ultraviolet imaging spectrometer(SEUlS), combined with the current states of domestic and foreign extreme ultraviolet imaging spectrometer, a few of parameters for SEUIS design were drew up in the present paper. The advantages and disadvantages of all kinds of optical configurations were discussed,and the configuration of combination of telescope and spectrometer was chosen. The available main components were also described, off-axis parabolic mirror was chosen for telescope, and a high density uniform-line-space toroidal grating for dispersion device. The optical system which satisfies the performance parameters was designed The design process, detailed parameters and results were presented in the end. The working wavelength of the optics system is 17. 0~21. 0 nm, the field of view is 1 228"×1 024", the spatial resolution is 0. 8 arc sec ? Pixel-1, the spectral resolution is about 0. 00198 nm ? Pixel-1, and the total length of system is about 2.8m.%在极紫外波段对太阳进行超光谱成像观测是研究太阳上层大气,日冕中等离子物理特性的重要手段.依据太阳极紫外成像光谱仪的应用,结合国内外极紫外成像光谱仪发展现状,制定了太阳极紫外成像光谱仪的性能指标.通过比较各种光学结构的优缺点,选择望远镜与光谱仪组合的结构.讨论并选择了可用的基本元器件,望远系统采用离轴抛物面反射镜,分光器件为高密度超环面等间距光栅.设计出符合指标的光学系统.最后给出了太阳极紫外成像光谱仪的设计过程、详细参数与结果.光学系统的工作波段为17.0~21.0nm,视场是1228″×1024″,空间分辨率达到0.8 arcsec·pixel-1,光谱分辨率约为0.001 98 nm·pixel-1,系统总长度约为2.8m.

  6. Extreme ultraviolet Talbot interference lithography.

    Science.gov (United States)

    Li, Wei; Marconi, Mario C

    2015-10-05

    Periodic nanopatterns can be generated using lithography based on the Talbot effect or optical interference. However, these techniques have restrictions that limit their performance. High resolution Talbot lithography is limited by the very small depth of focus and the demanding requirements in the fabrication of the master mask. Interference lithography, with large DOF and high resolution, is limited to simple periodic patterns. This paper describes a hybrid extreme ultraviolet lithography approach that combines Talbot lithography and interference lithography to render an interference pattern with a lattice determined by a Talbot image. As a result, the method enables filling the arbitrary shaped cells produced by the Talbot image with interference patterns. Detailed modeling, system design and experimental results using a tabletop EUV laser are presented.

  7. Adaptive multilayer optics for extreme ultraviolet wavelengths

    NARCIS (Netherlands)

    Bayraktar, Muharrem

    2015-01-01

    In this thesis we describe the development of a new class of optical components to enhance the imaging performance by enabling adaptations of the optics. When used at extreme ultraviolet (EUV) wavelengths, such ‘adaptive optics’ offers the potential to achieve the highest spatial resolution in imagi

  8. Soft x-ray microscopy and extreme ultraviolet lithography: Imaging in the 20-50 nm regime (abstract) (invited)

    Science.gov (United States)

    Attwood, David

    2002-03-01

    Advances in short wavelength optics, covering the range from 1 to 14 nm, are providing new results and new opportunities. Zone plate lenses [E. Anderson et al., J. Vac. Sci. Techno. B 18, 2970 (2000)] for soft x-ray microscopy [G. Denbeaux, Rev. Sci. Instrum. (these proceedings); W. Chao, Proc. SPIE 4146, 171 (2000)] are now made to high accuracy with outer zone widths of 25 nm, and demonstrated resolution of 23 nm with proper illumination and stability. These permit important advances in the study of protein specific transport and structure in the life sciences [C. Larabell (private communication); W. Meyer-Ilse et al., J. Microsc. 201, 395 (2001)] and the study of magnetic materials [P. Fischer et al., J. Synchrotron. Radiat. 8, 325 (2001)] with elemental sensitivity at the resolution of individual domains. Major corporations (members of the EUV Limited Liability Company are Intel, Motorola, AMD, Micron, Infineon, and IBM) are now preparing the path for the fabrication of future computer chips, in the years 2007 and beyond, using multilayer coated reflective optics, which achieve reflectivities of 70% in the 11-14 nm region [T. Barbee et al., Appl. Opt. 24, 883 (1985); C. Montcalm et al., Proc. SPIE 3676, 710 (1999)]. These coated optics are to be incorporated in extreme ultraviolet (EUV) print cameras, known as "steppers." Electronic patterns with features in the range of 50-70 nm have been printed. The first alpha tool stepper recently demonstrated all critical technologies [D. Tichenor et al., Proc. SPIE 4343, 19 (2001)] needed for EUV lithography. Preproduction beta tools are targeted for delivery by leading suppliers [ASML, the Netherlands, at the SPIE Microlithography Conference, Santa Clara, CA, March 2001] in 2004, with high volume production tools available in late 2006 for manufacturing in 2007. New results in these two areas will be discussed in the context of the synergy of science and technology.

  9. Extreme ultraviolet interferometry

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Kenneth A. [Univ. of California, Berkeley, CA (United States). Dept. of Physics

    1997-12-01

    EUV lithography is a promising and viable candidate for circuit fabrication with 0.1-micron critical dimension and smaller. In order to achieve diffraction-limited performance, all-reflective multilayer-coated lithographic imaging systems operating near 13-nm wavelength and 0.1 NA have system wavefront tolerances of 0.27 nm, or 0.02 waves RMS. Owing to the highly-sensitive resonant reflective properties of multilayer mirrors and extraordinarily tight tolerances set forth for their fabrication, EUV optical systems require at-wavelength EUV interferometry for final alignment and qualification. This dissertation discusses the development and successful implementation of high-accuracy EUV interferometric techniques. Proof-of-principle experiments with a prototype EUV point-diffraction interferometer for the measurement of Fresnel zoneplate lenses first demonstrated sub-wavelength EUV interferometric capability. These experiments spurred the development of the superior phase-shifting point-diffraction interferometer (PS/PDI), which has been implemented for the testing of an all-reflective lithographic-quality EUV optical system. Both systems rely on pinhole diffraction to produce spherical reference wavefronts in a common-path geometry. Extensive experiments demonstrate EUV wavefront-measuring precision beyond 0.02 waves RMS. EUV imaging experiments provide verification of the high-accuracy of the point-diffraction principle, and demonstrate the utility of the measurements in successfully predicting imaging performance. Complementary to the experimental research, several areas of theoretical investigation related to the novel PS/PDI system are presented. First-principles electromagnetic field simulations of pinhole diffraction are conducted to ascertain the upper limits of measurement accuracy and to guide selection of the pinhole diameter. Investigations of the relative merits of different PS/PDI configurations accompany a general study of the most significant sources

  10. Ionization Chamber Measures Extreme Ultraviolet

    Science.gov (United States)

    Carlson, Robert W.

    1987-01-01

    Ionization chamber operates in nearly total photon absorption as stable, self-calibrating detector of ionizing extreme ultraviolet radiation. Working gas of instrument is neon; photoionization properties well known and readily applicable to absolute measurements. Designed for measurements of solar ultraviolet flux aboard sounding rocket, instrument used on Earth to measure ultraviolet radiation in vacuum systems. Ionization chamber collects positive neon ions and electrons produced by irradiation of neon gas by ultraviolet photons. Approximately one ion produced by each photon; consequently, photoionization current nearly proportional to photon flux.

  11. Gradient-based inverse extreme ultraviolet lithography.

    Science.gov (United States)

    Ma, Xu; Wang, Jie; Chen, Xuanbo; Li, Yanqiu; Arce, Gonzalo R

    2015-08-20

    Extreme ultraviolet (EUV) lithography is the most promising successor of current deep ultraviolet (DUV) lithography. The very short wavelength, reflective optics, and nontelecentric structure of EUV lithography systems bring in different imaging phenomena into the lithographic image synthesis problem. This paper develops a gradient-based inverse algorithm for EUV lithography systems to effectively improve the image fidelity by comprehensively compensating the optical proximity effect, flare, photoresist, and mask shadowing effects. A block-based method is applied to iteratively optimize the main features and subresolution assist features (SRAFs) of mask patterns, while simultaneously preserving the mask manufacturability. The mask shadowing effect may be compensated by a retargeting method based on a calibrated shadowing model. Illustrative simulations at 22 and 16 nm technology nodes are presented to validate the effectiveness of the proposed methods.

  12. Vectorial diffraction of extreme ultraviolet light and ultrashort light pulses

    NARCIS (Netherlands)

    Nugrowati, A.M.

    2008-01-01

    In this thesis, we present applications in optics involving the diffraction theory of light for two advanced technologies. We have used a rigorous vectorial diffraction method to model: (i) the imaging of mask structures in extreme ultraviolet lithography, and (ii) ultrashort pulse propagation thro

  13. Extreme Ultraviolet Explorer Bright Source List

    Science.gov (United States)

    Malina, Roger F.; Marshall, Herman L.; Antia, Behram; Christian, Carol A.; Dobson, Carl A.; Finley, David S.; Fruscione, Antonella; Girouard, Forrest R.; Hawkins, Isabel; Jelinsky, Patrick

    1994-01-01

    Initial results from the analysis of the Extreme Ultraviolet Explorer (EUVE) all-sky survey (58-740 A) and deep survey (67-364 A) are presented through the EUVE Bright Source List (BSL). The BSL contains 356 confirmed extreme ultraviolet (EUV) point sources with supporting information, including positions, observed EUV count rates, and the identification of possible optical counterparts. One-hundred twenty-six sources have been detected longward of 200 A.

  14. The Extreme Ultraviolet Variability of Quasars

    Science.gov (United States)

    Punsly, Brian; Marziani, Paola; Zhang, Shaohua; Muzahid, Sowgat; O’Dea, Christopher P.

    2016-10-01

    We study the extreme ultraviolet (EUV) variability (rest frame wavelengths 500–920 Å) of high-luminosity quasars using Hubble Space Telescope (HST) (low to intermediate redshift sample) and Sloan Digital sky Survey (SDSS) (high redshift sample) archives. The combined HST and SDSS data indicates a much more pronounced variability when the sampling time between observations in the quasar rest frame is \\gt 2× {10}7 {{s}} compared to \\lt 1.5× {10}7 s. Based on an excess variance analysis, for time intervals \\lt 2× {10}7 {{s}} in the quasar rest frame, 10% of the quasars (4/40) show evidence of EUV variability. Similarly, for time intervals \\gt 2× {10}7 {{s}} in the quasar rest frame, 55% of the quasars (21/38) show evidence of EUV variability. The propensity for variability does not show any statistically significant change between 2.5× {10}7 {{s}} and 3.16× {10}7 {{s}} (1 year). The temporal behavior is one of a threshold time interval for significant variability as opposed to a gradual increase on these timescales. A threshold timescale can indicate a characteristic spatial dimension of the EUV region. We explore this concept in the context of the slim disk models of accretion. We find that for rapidly spinning black holes, the radial infall time to the plunge region of the optically thin surface layer of the slim disk that is responsible for the preponderance of the EUV flux emission (primarily within 0–7 black hole radii from the inner edge of the disk) is consistent with the empirically determined variability timescale.

  15. Tomographic extreme-ultraviolet spectrographs: TESS.

    Science.gov (United States)

    Cotton, D M; Stephan, A; Cook, T; Vickers, J; Taylor, V; Chakrabarti, S

    2000-08-01

    We describe the system of Tomographic Extreme Ultraviolet (EUV) SpectrographS (TESS) that are the primary instruments for the Tomographic Experiment using Radiative Recombinative Ionospheric EUV and Radio Sources (TERRIERS) satellite. The spectrographs were designed to make high-sensitivity {80 counts/s)/Rayleigh [one Rayleigh is equivalent to 10(6) photons/(4pi str cm(2)s)}, line-of-sight measurements of the oi 135.6- and 91.1-nm emissions suitable for tomographic inversion. The system consists of five spectrographs, four identical nightglow instruments (for redundancy and added sensitivity), and one instrument with a smaller aperture to reduce sensitivity and increase spectral resolution for daytime operation. Each instrument has a bandpass of 80-140 nm with approximately 2- and 1-nm resolution for the night and day instruments, respectively. They utilize microchannel-plate-based two-dimensional imaging detectors with wedge-and-strip anode readouts. The instruments were designed, fabricated, and calibrated at Boston University, and the TERRIERS satellite was launched on 18 May 1999 from Vandenberg Air Force Base, California.

  16. Plans for the extreme ultraviolet explorer data base

    Science.gov (United States)

    Marshall, Herman L.; Dobson, Carl A.; Malina, Roger F.; Bowyer, Stuart

    1988-01-01

    The paper presents an approach for storage and fast access to data that will be obtained by the Extreme Ultraviolet Explorer (EUVE), a satellite payload scheduled for launch in 1991. The EUVE telescopes will be operated remotely from the EUVE Science Operation Center (SOC) located at the University of California, Berkeley. The EUVE science payload consists of three scanning telescope carrying out an all-sky survey in the 80-800 A spectral region and a Deep Survey/Spectrometer telescope performing a deep survey in the 80-250 A spectral region. Guest Observers will remotely access the EUVE spectrometer database at the SOC. The EUVE database will consist of about 2 X 10 to the 10th bytes of information in a very compact form, very similar to the raw telemetry data. A history file will be built concurrently giving telescope parameters, command history, attitude summaries, engineering summaries, anomalous events, and ephemeris summaries.

  17. Optical design of moon-based earth's plasmaspheric extreme ultraviolet imager%月基地球等离子体层极紫外成像仪的光学设计

    Institute of Scientific and Technical Information of China (English)

    陈波; 何飞

    2011-01-01

    According to the 30. 4 nm radiation properties of the earth' s plasmasphere, an earth' s plasmaspheric extreme ultraviolet imaging method based on the moon was researched for the first time. The technical parameters of the extreme ultraviolet imager used in the lunar surface were determined, and its field of view is 15°, angular resolution is 0. 1° and the entrance pupil area is larger than 70 cm2. By combining a single spherical multilayer mirror and a spherical microchannel plate photon counting imaging detector, the extrame ultraviolet imager was designed. The ray tracing of designed extreme ultraviolet imager with multilayer optics was also performed. Results show that the radii of the blur spots are 0. 210, 0. 204, 0. 204, and 0. 207 mm respectively at 0,3,5, and 7. 5°, which are basically identical at different field of views. In woking on the lunar surface, the imager has a visionscope of 15. 0 Re to cover the main body of the earth's plasmasphere and a spatial resolution of 0. 10 RE that can reveal the main details of the earth' s plasmasphere. It provides a high quality imaging method for the observation of earths plasmasphere.%依据地球等离子体层在30.4 nm的辐射特性,首次以月球为观测点进行地球等离子体层极紫外波段成像观测方法研究.确定了在月球表面使用的极紫外成像仪的技术参数,给出了视场角为15°、角分辨率为0.1°、入瞳面积>70 cm2的极紫外成像仪的结构形式,采用单球面多层膜反射镜与球面微通道板光子计数成像探测器相结合的方式设计了极紫外成像仪.对设计的极紫外多层膜光学系统成像仪进行光线追迹,弥散斑半径分别为0.210 mm(0°视场)、0.204 mm(3°视场)、0.204 mm(5°视场)、0.207 mm(7.5°视场),对应的角分辨率为0.08°,弥散斑在不同视场角度基本均匀,其结果满足设计要求.该仪器可在月球表面工作,获得视场范围为15.0 RE,覆盖地球等离子体层主

  18. The Stellar Extreme-Ultraviolet Radiation Field

    Science.gov (United States)

    Vallerga, John

    1998-04-01

    The local extreme ultraviolet (EUV) radiation field from stellar sources has been determined by combining the EUV spectra of 54 stars, taken with the spectrometers aboard the Extreme Ultraviolet Explorer satellite. The resultant spectrum over the range 70-730 Å is estimated to be 95% complete above 400 Å and 90% complete above 200 Å. The flux contributed by two B stars and three hot white dwarfs dominate the spectrum except at the shortest wavelengths, where an assortment of EUV source types contribute. The high electron densities measured toward nearby stars can be accounted for by photoionization from this radiation field, but the spectrum is too soft to explain the overionization of helium with respect to hydrogen recently measure in the Local Cloud.

  19. Characteristics of extreme ultraviolet emission from high-Z plasmas

    Science.gov (United States)

    Ohashi, H.; Higashiguchi, T.; Suzuki, Y.; Kawasaki, M.; Suzuki, C.; Tomita, K.; Nishikino, M.; Fujioka, S.; Endo, A.; Li, B.; Otsuka, T.; Dunne, P.; O'Sullivan, G.

    2016-03-01

    We demonstrate the extreme ultraviolet (EUV) and soft x-ray sources in the 2 to 7 nm spectral region related to the beyond EUV (BEUV) question at 6.x nm and the water window source based on laser-produced high-Z plasmas. Resonance emission from multiply charged ions merges to produce intense unresolved transition arrays (UTAs), extending below the carbon K edge (4.37 nm). An outline of a microscope design for single-shot live cell imaging is proposed based on high-Z plasma UTA source, coupled to multilayer mirror optics.

  20. Gated pinhole camera imaging of the high-energy ions emitted by a discharge produced Sn plasma for extreme ultraviolet generation

    NARCIS (Netherlands)

    Gielissen, K.; Sidelnikov, Y.; Glushkov, D.; Soer, W.A.; Banine V.Y.; Van der Mullen, J.J.A.M.

    2010-01-01

    The origin and nature of the high-energy ions emitted by a dischargeproduced plasma source are studied using gated pinhole camera imaging. Time-of-flight analysis in combination with Faraday cup measurements enables characterization of the high-velocity component of theionic debris. The use of an

  1. Femtosecond transparency in the extreme ultraviolet

    CERN Document Server

    Tarana, Michal

    2011-01-01

    Electromagnetically induced transparency-like behavior in the extreme ultraviolet (XUV) is studied theoretically, including the effect of intense 800 nm laser dressing of He 2s2p (1Po) and 2p^2 (1Se) autoionizing states. We present an ab initio solution of the time-dependent Schrodinger equation (TDSE) in an LS-coupling configuration interaction basis set. The method enables a rigorous treatment of optical field ionization of these coupled autoionizing states into the N = 2 continuum in addition to N = 1. Our calculated transient absorption spectra show encouraging agreement with experiment.

  2. The Extreme Ultraviolet Spectra of Low Redshift Radio Loud Quasars

    CERN Document Server

    Punsly, Brian; Marziani, Paola; O'Dea, Christopher P

    2016-01-01

    This paper reports on the extreme ultraviolet (EUV) spectrum of three low redshift ($z \\sim 0.6$) radio loud quasars, 3C 95, 3C 57 and PKS 0405-123. The spectra were obtained with the Cosmic Origins Spectrograph (COS) of the Hubble Space Telescope. The bolometric thermal emission, $L_{bol}$, associated with the accretion flow is a large fraction of the Eddington limit for all of these sources. We estimate the long term time averaged jet power, $\\overline{Q}$, for the three sources. $\\overline{Q}/L_{bol}$, is shown to lie along the correlation of $\\overline{Q}/L_{bol}$ and $\\alpha_{EUV}$ found in previous studies of the EUV continuum of intermediate and high redshift quasars, where the EUV continuum flux density between 1100 \\AA\\, and 700 \\AA\\, is defined by $F_{\

  3. Seismic Imager Space Telescope

    Science.gov (United States)

    Sidick, Erkin; Coste, Keith; Cunningham, J.; Sievers,Michael W.; Agnes, Gregory S.; Polanco, Otto R.; Green, Joseph J.; Cameron, Bruce A.; Redding, David C.; Avouac, Jean Philippe; Ampuero, Jean Paul; Leprince, Sebastien; Michel, Remi

    2012-01-01

    A concept has been developed for a geostationary seismic imager (GSI), a space telescope in geostationary orbit above the Pacific coast of the Americas that would provide movies of many large earthquakes occurring in the area from Southern Chile to Southern Alaska. The GSI movies would cover a field of view as long as 300 km, at a spatial resolution of 3 to 15 m and a temporal resolution of 1 to 2 Hz, which is sufficient for accurate measurement of surface displacements and photometric changes induced by seismic waves. Computer processing of the movie images would exploit these dynamic changes to accurately measure the rapidly evolving surface waves and surface ruptures as they happen. These measurements would provide key information to advance the understanding of the mechanisms governing earthquake ruptures, and the propagation and arrest of damaging seismic waves. GSI operational strategy is to react to earthquakes detected by ground seismometers, slewing the satellite to point at the epicenters of earthquakes above a certain magnitude. Some of these earthquakes will be foreshocks of larger earthquakes; these will be observed, as the spacecraft would have been pointed in the right direction. This strategy was tested against the historical record for the Pacific coast of the Americas, from 1973 until the present. Based on the seismicity recorded during this time period, a GSI mission with a lifetime of 10 years could have been in position to observe at least 13 (22 on average) earthquakes of magnitude larger than 6, and at least one (2 on average) earthquake of magnitude larger than 7. A GSI would provide data unprecedented in its extent and temporal and spatial resolution. It would provide this data for some of the world's most seismically active regions, and do so better and at a lower cost than could be done with ground-based instrumentation. A GSI would revolutionize the understanding of earthquake dynamics, perhaps leading ultimately to effective warning

  4. Feasibility of Extreme Ultraviolet Active Optical Clock

    Institute of Scientific and Technical Information of China (English)

    ZHUANG Wei; CHEN Jing-Biao

    2011-01-01

    @@ We propose an experimental scheme of vacuum ultraviolet(VUV)and extreme ultraviolet(XUV)optical fre-quency standards with noble gas atoms.Considering metastable state 3P2 noble atoms pumped by a conventional discharging method,the atomic beam is collimated with transverse laser cooling at the metastable state and en-ters into the laser cavity in the proposed setup.Due to stimulated emission from the metasable state to the ground state inside the laser cavity consisting of VUV reflection coating mirrors,our calculations show that with enough population inversion to compensate for the cavity loss,an active optical frequency standard at VUV and XUV is feasible.

  5. Absolute sensitivity calibration of extreme ultraviolet photoresists

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Juanita; Naulleau, Patrick P.; Gullikson, Eric M.; Aquila, Andrew; George, Simi; Niakoula, Dimitra

    2008-05-16

    One of the major challenges facing the commercialization of extreme ultraviolet (EUV) lithography remains simultaneously achieving resist sensitivity, line-edge roughness, and resolution requirement. Sensitivity is of particular concern owing to its direct impact on source power requirements. Most current EUV exposure tools have been calibrated against a resist standard with the actual calibration of the standard resist dating back to EUV exposures at Sandia National Laboratories in the mid 1990s. Here they report on an independent sensitivity calibration of two baseline resists from the SEMATECH Berkeley MET tool performed at the Advanced Light Source Calibrations and Standards beamline. The results show the baseline resists to be approximately 1.9 times faster than previously thought based on calibration against the long standing resist standard.

  6. Photoresists in extreme ultraviolet lithography (EUVL)

    Science.gov (United States)

    De Simone, Danilo; Vesters, Yannick; Vandenberghe, Geert

    2017-06-01

    The evolutionary advances in photosensitive material technology, together with the shortening of the exposure wavelength in the photolithography process, have enabled and driven the transistor scaling dictated by Moore's law for the last 50 years. Today, the shortening wavelength trend continues to improve the chips' performance over time by feature size miniaturization. The next-generation lithography technology for high-volume manufacturing (HVM) is extreme ultraviolet lithography (EUVL), using a light source with a wavelength of 13.5 nm. Here, we provide a brief introduction to EUVL and patterning requirements for sub-0-nm feature sizes from a photomaterial standpoint, discussing traditional and novel photoresists. Emphasis will be put on the novel class of metal-containing resists (MCRs) as well as their challenges from a manufacturing prospective.

  7. Ptychographic hyperspectral spectromicroscopy with an extreme ultraviolet high harmonic comb

    CERN Document Server

    Zhang, Bosheng; Seaberg, Matthew H; Shanblatt, Elisabeth R; Porter, Christina L; Karl,, Robert; Mancuso, Christopher A; Kapteyn, Henry C; Murnane, Margaret M; Adams, Daniel E

    2016-01-01

    We demonstrate a new scheme of spectromicroscopy in the extreme ultraviolet (EUV) spectral range, where the spectral response of the sample at different wavelengths is imaged simultaneously. It is enabled by applying ptychographical information multiplexing (PIM) to a tabletop EUV source based on high harmonic generation, where four spectrally narrow harmonics near 30 nm form a spectral comb structure. Extending PIM from previously demonstrated visible wavelengths to the EUV/X-ray wavelengths promises much higher spatial resolution and more powerful spectral contrast mechanism, making PIM an attractive spectromicroscopy method in both the microscopy and the spectroscopy aspects. Besides the sample, the multicolor EUV beam is also imaged in situ, making our method a powerful beam characterization technique. No hardware is used to separate or narrow down the wavelengths, leading to efficient use of the EUV radiation.

  8. Spatially Resolved Fourier Transform Spectroscopy in the Extreme Ultraviolet

    CERN Document Server

    Jansen, G S M; Freisem, L; Eikema, K S E; Witte, S

    2016-01-01

    Coherent extreme ultraviolet (XUV) radiation produced by table-top high-harmonic generation (HHG) sources provides a wealth of possibilities in research areas ranging from attosecond physics to high resolution coherent imaging. However, it remains challenging to fully exploit the coherence of such sources for interferometry and Fourier transform spectroscopy (FTS). This is due to the need for a measurement system that is stable at the level of a wavelength fraction, yet allowing a controlled scanning of time delays. Here we demonstrate XUV interferometry and FTS in the 17-55 nm wavelength range using an ultrastable common-path interferometer suitable for high-intensity laser pulses that drive the HHG process. This approach enables the generation of fully coherent XUV pulse pairs with sub-attosecond timing variation, tunable time delay and a clean Gaussian spatial mode profile. We demonstrate the capabilities of our XUV interferometer by performing spatially resolved FTS on a thin film composed of titanium and...

  9. Nanolithography using Bessel Beams of Extreme Ultraviolet Wavelength.

    Science.gov (United States)

    Fan, Daniel; Wang, Li; Ekinci, Yasin

    2016-08-09

    Bessel beams are nondiffracting light beams with large depth-of-focus and self-healing properties, making them suitable as a serial beam writing tool over surfaces with arbitrary topography. This property breaks the inherent resolution vs. depth-of-focus tradeoff of photolithography. One approach for their formation is to use circularly symmetric diffraction gratings. Such a ring grating was designed and fabricated for the extreme ultraviolet (EUV) wavelength of 13.5 nm, a candidate wavelength for future industrial lithography. Exposure of the aerial images showed that a Bessel beam with an approximately 1 mm long z-invariant central core of 223 nm diameter had been achieved, in good agreement with theory. Arbitrary patterns were written using the Bessel spot, demonstrating possible future application of Bessel beams for serial beam writing. Lithographic marks of ~30 nm size were also observed using a high resolution Bessel beam.

  10. Nanolithography using Bessel Beams of Extreme Ultraviolet Wavelength

    Science.gov (United States)

    Fan, Daniel; Wang, Li; Ekinci, Yasin

    2016-08-01

    Bessel beams are nondiffracting light beams with large depth-of-focus and self-healing properties, making them suitable as a serial beam writing tool over surfaces with arbitrary topography. This property breaks the inherent resolution vs. depth-of-focus tradeoff of photolithography. One approach for their formation is to use circularly symmetric diffraction gratings. Such a ring grating was designed and fabricated for the extreme ultraviolet (EUV) wavelength of 13.5 nm, a candidate wavelength for future industrial lithography. Exposure of the aerial images showed that a Bessel beam with an approximately 1 mm long z-invariant central core of 223 nm diameter had been achieved, in good agreement with theory. Arbitrary patterns were written using the Bessel spot, demonstrating possible future application of Bessel beams for serial beam writing. Lithographic marks of ~30 nm size were also observed using a high resolution Bessel beam.

  11. Extreme ultraviolet spectral irradiance measurements since 1946

    Science.gov (United States)

    Schmidtke, G.

    2015-03-01

    In the physics of the upper atmosphere the solar extreme ultraviolet (EUV) radiation plays a dominant role controlling most of the thermospheric/ionospheric (T/I) processes. Since this part of the solar spectrum is absorbed in the thermosphere, platforms to measure the EUV fluxes became only available with the development of rockets reaching altitude levels exceeding 80 km. With the availability of V2 rockets used in space research, recording of EUV spectra started in 1946 using photographic films. The development of pointing devices to accurately orient the spectrographs toward the sun initiated intense activities in solar-terrestrial research. The application of photoelectric recording technology enabled the scientists placing EUV spectrometers aboard satellites observing qualitatively strong variability of the solar EUV irradiance on short-, medium-, and long-term scales. However, as more measurements were performed more radiometric EUV data diverged due to the inherent degradation of the EUV instruments with time. Also, continuous recording of the EUV energy input to the T/I system was not achieved. It is only at the end of the last century that there was progress made in solving the serious problem of degradation enabling to monitore solar EUV fluxes with sufficient radiometric accuracy. The data sets available allow composing the data available to the first set of EUV data covering a period of 11 years for the first time. Based on the sophisticated instrumentation verified in space, future EUV measurements of the solar spectral irradiance (SSI) are promising accuracy levels of about 5% and less. With added low-cost equipment, real-time measurements will allow providing data needed in ionospheric modeling, e.g., for correcting propagation delays of navigation signals from space to earth. Adding EUV airglow and auroral emission monitoring by airglow cameras, the impact of space weather on the terrestrial T/I system can be studied with a spectral terrestrial

  12. The Extreme Ultraviolet Variability of Quasars

    CERN Document Server

    Punsly, Brian; Zhang, Shaohua; Muzahid, Sowgat; O'Dea, Christopher P

    2016-01-01

    We study the extreme ultraviolet (EUV) variability (rest frame wavelengths 500 - 920 $\\AA$) of high luminosity quasars using HST (low to intermediate redshift sample) and SDSS (high redshift sample) archives. The combined HST and SDSS data indicates a much more pronounced variability when the sampling time between observations in the quasar rest frame is $> 2\\times 10^{7}$ sec compared to $2\\times 10^{7}$ sec in the quasar rest frame, $55\\%$ of the quasars (21/38) show evidence of EUV variability. The propensity for variability does not show any statistically significant change between $2.5\\times 10^{7}$ sec and $3.16\\times 10^{7}$ sec (1 yr). The temporal behavior is one of a threshold time interval for significant variability as opposed to a gradual increase on these time scales. A threshold time scale can indicate a characteristic spatial dimension of the EUV region. We explore this concept in the context of the slim disk models of accretion. We find that for rapidly spinning black holes, the radial infall...

  13. Terbium-based extreme ultraviolet multilayers.

    Science.gov (United States)

    Windt, David L; Seely, John F; Kjornrattanawanich, Benjawan; Uspenskii, Yu A

    2005-12-01

    We have fabricated periodic multilayers that comprise either Si/Tb or SiC/Tb bilayers, designed to operate as narrowband reflective coatings near 60 nm wavelength in the extreme ultraviolet (EUV). We find peak reflectance values in excess of 20% near normal incidence. The spectral bandpass of the best Si/Tb multilayer was measured to be 6.5 nm full width at half-maximum (FWHM), while SiC/Tb multilayers have a more broad response, of order 9.4 nm FWHM. Transmission electron microscopy analysis of Si/Tb multilayers reveals polycrystalline Tb layers, amorphous Si layers, and relatively large asymmetric amorphous interlayers. Thermal annealing experiments indicate excellent stability to 100 degrees C (1 h) for Si/Tb. These new multilayer coatings have the potential for use in normal incidence instrumentation in a region of the EUV where efficient narrowband multilayers have not been available until now. In particular, reflective Si/Tb multilayers can be used for solar physics applications where the coatings can be tuned to important emission lines such as O V near 63.0 nm and Mg X near 61.0 nm.

  14. Four-wave mixing experiments with extreme ultraviolet transient gratings.

    Science.gov (United States)

    Bencivenga, F; Cucini, R; Capotondi, F; Battistoni, A; Mincigrucci, R; Giangrisostomi, E; Gessini, A; Manfredda, M; Nikolov, I P; Pedersoli, E; Principi, E; Svetina, C; Parisse, P; Casolari, F; Danailov, M B; Kiskinova, M; Masciovecchio, C

    2015-04-09

    Four-wave mixing (FWM) processes, based on third-order nonlinear light-matter interactions, can combine ultrafast time resolution with energy and wavevector selectivity, and enable the exploration of dynamics inaccessible by linear methods. The coherent and multi-wave nature of the FWM approach has been crucial in the development of advanced technologies, such as silicon photonics, subwavelength imaging and quantum communications. All these technologies operate at optical wavelengths, which limits the spatial resolution and does not allow the probing of excitations with energy in the electronvolt range. Extension to shorter wavelengths--that is, the extreme ultraviolet and soft-X-ray ranges--would allow the spatial resolution to be improved and the excitation energy range to be expanded, as well as enabling elemental selectivity to be achieved by exploiting core resonances. So far, FWM applications at such wavelengths have been prevented by the absence of coherent sources of sufficient brightness and of suitable experimental set-ups. Here we show how transient gratings, generated by the interference of coherent extreme-ultraviolet pulses delivered by the FERMI free-electron laser, can be used to stimulate FWM processes at suboptical wavelengths. Furthermore, we have demonstrated the possibility of observing the time evolution of the FWM signal, which shows the dynamics of coherent excitations as molecular vibrations. This result opens the way to FWM with nanometre spatial resolution and elemental selectivity, which, for example, would enable the investigation of charge-transfer dynamics. The theoretical possibility of realizing these applications has already stimulated ongoing developments of free-electron lasers: our results show that FWM at suboptical wavelengths is feasible, and we hope that they will enable advances in present and future photon sources.

  15. The Solar Extreme Ultraviolet Monitor for MAVEN

    Science.gov (United States)

    Eparvier, F. G.; Chamberlin, P. C.; Woods, T. N.; Thiemann, E. M. B.

    2015-12-01

    The Extreme Ultraviolet (EUV) monitor is an instrument on the NASA Mars Atmosphere and Volatile EvolutioN (MAVEN) mission, designed to measure the variability of the solar soft x-rays and EUV irradiance at Mars. The solar output in this wavelength range is a primary energy input to the Mars atmosphere and a driver for the processes leading to atmospheric escape. The MAVEN EUV monitor consists of three broadband radiometers. The radiometers consist of silicon photodiodes with different bandpass-limiting filters for each channel. The filters for the radiometers are: Channel A: thin foil C/Al/Nb/C for 0.1-3 nm and 17-22 nm, Channel B: thin foil C/Al/Ti/C for 0.1-7 nm, and Channel C: interference filter for 121-122 nm. A fourth, covered photodiode is used to monitor variations in dark signal due to temperature and radiation background changes. The three science channels will monitor emissions from the highly variable corona and transition region of the solar atmosphere. The EUV monitor is mounted on the top deck of the MAVEN spacecraft and is pointed at the Sun for most of its orbit around Mars. The measurement cadence is 1-second. The broadband irradiances can be used to monitor the most rapid changes in solar irradiance due to flares. In combination with time-interpolated observations at Earth of slower varying solar spectral emissions, the broadband MAVEN EUV monitor measurements will also be used in a spectral irradiance model to generate the full EUV spectrum at Mars from 0 to 190 nm in 1-nm bins on a time cadence of 1-minute and daily averages.

  16. High photon flux table-top coherent extreme ultraviolet source

    CERN Document Server

    Hädrich, Steffen; Rothhardt, Jan; Krebs, Manuel; Hoffmann, Armin; Pronin, Oleg; Pervak, Vladimir; Limpert, Jens; Tünnermann, Andreas

    2014-01-01

    High harmonic generation (HHG) enables extreme ultraviolet radiation with table-top setups. Its exceptional properties, such as coherence and (sub)-femtosecond pulse durations, have led to a diversity of applications. Some of these require a high photon flux and megahertz repetition rates, e.g. to avoid space charge effects in photoelectron spectroscopy. To date this has only been achieved with enhancement cavities. Here, we establish a novel route towards powerful HHG sources. By achieving phase-matched HHG of a megahertz fibre laser we generate a broad plateau (25 eV - 40 eV) of strong harmonics, each containing more than $10^{12}$ photons/s, which constitutes an increase by more than one order of magnitude in that wavelength range. The strongest harmonic (H25, 30 eV) has an average power of 143 $\\mu$W ($3\\cdot10^{13}$ photons/s). This concept will greatly advance and facilitate applications in photoelectron or coincidence spectroscopy, coherent diffractive imaging or (multidimensional) surface science.

  17. Absolute, Extreme-Ultraviolet, Solar Spectral Irradiance Monitor (AESSIM)

    Science.gov (United States)

    Huber, Martin C. E.; Smith, Peter L.; Parkinson, W. H.; Kuehne, M.; Kock, M.

    1988-01-01

    AESSIM, the Absolute, Extreme-Ultraviolet, Solar Spectral Irradiance Monitor, is designed to measure the absolute solar spectral irradiance at extreme-ultraviolet (EUV) wavelengths. The data are required for studies of the processes that occur in the earth's upper atmosphere and for predictions of atmospheric drag on space vehicles. AESSIM is comprised of sun-pointed spectrometers and newly-developed, secondary standards of spectral irradiance for the EUV. Use of the in-orbit standard sources will eliminate the uncertainties caused by changes in spectrometer efficiency that have plagued all previous measurements of the solar spectral EUV flux.

  18. Extreme ultraviolet induced defects on few-layer graphene

    NARCIS (Netherlands)

    Gao, A.; Rizo, P. J.; Zoethout, E.; Scaccabarozzi, L.; Lee, C. J.; Banine, V.; F. Bijkerk,

    2013-01-01

    We use Raman spectroscopy to show that exposing few-layer graphene to extreme ultraviolet (EUV, 13.5 nm) radiation, i.e., relatively low photon energy, results in an increasing density of defects. Furthermore, exposure to EUV radiation in a H2 background increases the graphene dosage sensitivity, du

  19. Defect formation in single layer graphene under extreme ultraviolet irradiation

    NARCIS (Netherlands)

    Gao, An; Zoethout, E.; Zoethout, E.; Sturm, Jacobus Marinus; Lee, Christopher James; Bijkerk, Frederik

    2014-01-01

    We study extreme ultraviolet (EUV) radiation induced defects in single-layer graphene. Two mechanisms for inducing defects in graphene were separately investigated: photon induced chemical reactions between graphene and background residual gases, and breaking sp2 bonds, due to photon and/or photoele

  20. Graphene defect formation by extreme ultraviolet generated photoelectrons

    NARCIS (Netherlands)

    Gao, An; Lee, Christopher James; Bijkerk, Frederik

    2014-01-01

    We have studied the effect of photoelectrons on defect formation in graphene during extreme ultraviolet (EUV) irradiation. Assuming the major role of these low energy electrons, we have mimicked the process by using low energy primary electrons. Graphene is irradiated by an electron beam with energy

  1. Graphene defect formation by extreme ultraviolet generated photoelectrons

    NARCIS (Netherlands)

    Gao, A.; Lee, C. J.; F. Bijkerk,

    2014-01-01

    We have studied the effect of photoelectrons on defect formation in graphene during extreme ultraviolet (EUV) irradiation. Assuming the major role of these low energy electrons, we have mimicked the process by using low energy primary electrons. Graphene is irradiated by an electron beam with energy

  2. Four wave mixing experiments with extreme ultraviolet transient gratings

    Science.gov (United States)

    Bencivenga, F.; Cucini, R.; Capotondi, F.; Battistoni, A.; Mincigrucci, R.; Giangrisostomi, E.; Gessini, A.; Manfredda, M.; Nikolov, I. P.; Pedersoli, E.; Principi, E.; Svetina, C.; Parisse, P.; Casolari, F.; Danailov, M. B.; Kiskinova, M.; Masciovecchio, C.

    2015-01-01

    Four wave mixing (FWM) processes, based on third-order non-linear light-matter interactions, can combine ultrafast time resolution with energy and wavevector selectivity, and enables to explore dynamics inaccessible by linear methods.1-7 The coherent and multi-wave nature of FWM approach has been crucial in the development of cutting edge technologies, such as silicon photonics,8 sub-wavelength imaging9 and quantum communications.10 All these technologies operate with optical wavelengths, which limit the spatial resolution and do not allow probing excitations with energy in the eV range. The extension to shorter wavelengths, that is the extreme ultraviolet (EUV) and soft-x-ray (SXR) range, will allow to improve the spatial resolution and to expand the excitation energy range, as well as to achieve elemental selectivity by exploiting core resonances.5-7,11-14 So far FWM applications at these wavelengths have been prevented by the absence of coherent sources of sufficient brightness and suitable experimental setups. Our results show how transient gratings, generated by the interference of coherent EUV pulses delivered by the FERMI free electron laser (FEL),15 can be used to stimulate FWM processes at sub-optical wavelengths. Furthermore, we have demonstrated the possibility to read the time evolution of the FWM signal, which embodies the dynamics of coherent excitations as molecular vibrations. This result opens the perspective for FWM with nanometer spatial resolution and elemental selectivity, which, for example, would enable the investigation of charge-transfer dynamics.5-7 The theoretical possibility to realize these applications have already stimulated dedicated and ongoing FEL developments;16-20 today our results show that FWM at sub-optical wavelengths is feasible and would be the spark to the further advancements of the present and new sources. PMID:25855456

  3. Kinematics and amplitude evolution of global coronal extreme ultraviolet waves

    Institute of Scientific and Technical Information of China (English)

    Ting Li; Jun Zhang; Shu-Hong Yang; Wei Liu

    2012-01-01

    With the observations of the Solar-Terrestrial Relations Observatory (STEREO) and the Solar Dynamics Observatory (SDO),we analyze in detail the kinematics of global coronal waves together with their intensity amplitudes (so-called "perturbation profiles").We use a semi-automatic method to investigate the perturbation profiles of coronal waves.The location and amplitude of the coronal waves are calculated over a 30° sector on the sphere,where the wave signal is strongest.The position with the strongest perturbation at each time is considered as the location of the wave front.In all four events,the wave velocities vary with time for most of their lifetime,up to 15 min,while in the event observed by the Atmospheric Imaging Assembly there is an additional early phase with a much higher velocity.The velocity varies greatly between different waves from 216 to 440 km s-1.The velocity of the two waves initially increases,subsequently decreases,and then increases again.Two other waves show a deceleration followed by an acceleration.Three categories of amplitude evolution of global coronal waves are found for the four events.The first is that the amplitude only shows a decrease.The second is that the amplitude initially increases and then decreases,and the third is that the amplitude shows an orderly increase,a decrease,an increase again and then a decrease.All the extreme ultraviolet waves show a decrease in amplitude while propagating farther away,probably because the driver of the global coronal wave (coronal mass ejection) is moving farther away from the solar surface.

  4. Bright high-repetition-rate source of narrowband extreme-ultraviolet harmonics beyond 22 eV

    Energy Technology Data Exchange (ETDEWEB)

    Wang, He [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Xu, Yiming [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Ulonska, Stefan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Robinson, Joseph S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Ranitovic, Predrag [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Kaindl, Robert A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division

    2015-06-11

    Novel table-top sources of extreme-ultraviolet light based on high-harmonic generation yield unique insight into the fundamental properties of molecules, nanomaterials or correlated solids, and enable advanced applications in imaging or metrology. Extending high-harmonic generation to high repetition rates portends great experimental benefits, yet efficient extreme-ultraviolet conversion of correspondingly weak driving pulses is challenging. In this article, we demonstrate a highly-efficient source of femtosecond extreme-ultraviolet pulses at 50-kHz repetition rate, utilizing the ultraviolet second-harmonic focused tightly into Kr gas. In this cascaded scheme, a photon flux beyond ≈3 × 1013 s-1 is generated at 22.3 eV, with 5 × 10-5 conversion efficiency that surpasses similar harmonics directly driven by the fundamental by two orders-of-magnitude. The enhancement arises from both wavelength scaling of the atomic dipole and improved spatio-temporal phase matching, confirmed by simulations. Finally, spectral isolation of a single 72-meV-wide harmonic renders this bright, 50-kHz extreme-ultraviolet source a powerful tool for ultrafast photoemission, nanoscale imaging and other applications.

  5. Extreme ultraviolet lithography: A few more pieces of the puzzle

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Christopher N. [Univ. of California, Berkeley, CA (United States)

    2009-05-20

    The work described in this dissertation has improved three essential components of extreme ultraviolet (EUV) lithography: exposure tools, photoresist, and metrology. Exposure tools. A field-averaging illumination stage is presented that enables nonuniform, high-coherence sources to be used in applications where highly uniform illumination is required. In an EUV implementation, it is shown that the illuminator achieves a 6.5% peak-to-valley intensity variation across the entire design field of view. In addition, a design for a stand-alone EUV printing tool capable of delivering 15 nm half-pitch sinusoidal fringes with available sources, gratings and nano-positioning stages is presented. It is shown that the proposed design delivers a near zero line-edge-rougness (LER) aerial image, something extremely attractive for the application of resist testing. Photoresist. Two new methods of quantifying the deprotection blur of EUV photoresists are described and experimentally demonstrated. The deprotection blur, LER, and sensitivity parameters of several EUV photoresists are quantified simultaneously as base weight percent, photoacid generator (PAG) weight percent, and post-exposure bake (PEB) temperature are varied. Two surprising results are found: (1) changing base weight percent does not significantly affect the deprotection blur of EUV photoresist, and (2) increasing PAG weight percent can simultaneously reduce LER and E-size in EUV photoresist. The latter result motivates the development of an EUV exposure statistics model that includes the effects of photon shot noise, the PAG spatial distribution, and the changing of the PAG distribution during the exposure. In addition, a shot noise + deprotection blur model is used to show that as deprotection blur becomes large relative to the size of the printed feature, LER reduction from improved counting statistics becomes dominated by an increase in LER due to reduced deprotection contrast. Metrology. Finally, this

  6. Telescience - Concepts and contributions to the Extreme Ultraviolet Explorer mission

    Science.gov (United States)

    Marchant, Will; Dobson, Carl; Chakrabarti, Supriya; Malina, Roger F.

    1987-01-01

    It is shown how the contradictory goals of low-cost and fast data turnaround characterizing the Extreme Ultraviolet Explorer (EUVE) mission can be achieved via the early use of telescience style transparent tools and simulations. The use of transparent tools reduces the parallel development of capability while ensuring that valuable prelaunch experience is not lost in the operations phase. Efforts made to upgrade the 'EUVE electronics' simulator are described.

  7. Extreme-Ultraviolet Vortices from a Free-Electron Laser

    Directory of Open Access Journals (Sweden)

    Primož Rebernik Ribič

    2017-08-01

    Full Text Available Extreme-ultraviolet vortices may be exploited to steer the magnetic properties of nanoparticles, increase the resolution in microscopy, and gain insight into local symmetry and chirality of a material; they might even be used to increase the bandwidth in long-distance space communications. However, in contrast to the generation of vortex beams in the infrared and visible spectral regions, production of intense, extreme-ultraviolet and x-ray optical vortices still remains a challenge. Here, we present an in-situ and an ex-situ technique for generating intense, femtosecond, coherent optical vortices at a free-electron laser in the extreme ultraviolet. The first method takes advantage of nonlinear harmonic generation in a helical undulator, producing vortex beams at the second harmonic without the need for additional optical elements, while the latter one relies on the use of a spiral zone plate to generate a focused, micron-size optical vortex with a peak intensity approaching 10^{14}  W/cm^{2}, paving the way to nonlinear optical experiments with vortex beams at short wavelengths.

  8. Final Report: Spectral Analysis of L-shell Data in the Extreme Ultraviolet from Tokamak Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Lepson, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Jernigan, J. Garrett [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Beiersdorfer, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-02-05

    We performed detailed analyses of extreme ultraviolet spectra taken by Lawrence Livermore National Laboratory on the National Spherical Torus Experiment at Princeton Plasma Physics Laboratory and on the Alcator CKmod tokamak at the M.I.T. Plasma Science and Fusion Center. We focused on the emission of iron, carbon, and other elements in several spectral band pass regions covered by the Atmospheric Imaging Assembly on the Solar Dynamics Observatory. We documented emission lines of carbon not found in currently used solar databases and demonstrated that this emission was due to charge exchange.

  9. Nano-antennae assisted emission of extreme ultraviolet radiation

    Energy Technology Data Exchange (ETDEWEB)

    Pfullmann, Nils; Noack, Monika; Cardoso de Andrade, Jose; Rausch, Stefan; Nagy, Tamas; Kovacev, Milutin [Leibniz Universitaet Hannover, Quantum Optics Institute (Germany); QUEST Centre for Quantum Engineering and Space-Time Research, Hannover (Germany); Reinhardt, Carsten [Laser Zentrum Hannover (Germany); Knittel, Vanessa; Bratschitsch, Rudolf; Leitenstorfer, Alfred [University of Konstanz, Department of Physics and Center for Applied Photonics (Germany); Akemeier, Dieter; Huetten, Andreas [Universitaet Bielefeld, AG Duenne Schichten Physik der Nanostrukturen (Germany); Morgner, Uwe [Leibniz Universitaet Hannover, Quantum Optics Institute (Germany); QUEST Centre for Quantum Engineering and Space-Time Research, Hannover (Germany); Laser Zentrum Hannover (Germany)

    2014-04-15

    High-order harmonic generation in xenon with oscillator repetition rates is studied. The necessary intensity is reached via plasmonic field enhancement at nanostructured arrays of bow-tie gold antennae. The theoretical analysis focuses on the thermal properties and the damage threshold of the bow-tie antennae. On the experimental side the number of contributing atoms is determined and optimized. Extreme ultraviolet radiation is successfully observed with photon fluxes almost an order of magnitude larger than previously reported. (copyright 2014 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  10. A desktop extreme ultraviolet microscope based on a compact laser-plasma light source

    Science.gov (United States)

    Wachulak, P. W.; Torrisi, A.; Bartnik, A.; Węgrzyński, Ł.; Fok, T.; Fiedorowicz, H.

    2017-01-01

    A compact, desktop size microscope, based on laser-plasma source and equipped with reflective condenser and diffractive Fresnel zone plate objective, operating in the extreme ultraviolet (EUV) region at the wavelength of 13.8 nm, was developed. The microscope is capable of capturing magnified images of objects with 95-nm full-pitch spatial resolution (48 nm 25-75% KE) and exposure time as low as a few seconds, combining reasonable acquisition conditions with stand-alone desktop footprint. Such EUV microscope can be regarded as a complementary imaging tool to already existing, well-established ones. Details about the microscope, characterization, resolution estimation and real sample images are presented and discussed.

  11. Aspherical surfaces design for extreme ultraviolet lithographic objective with correction of thermal aberration

    Science.gov (United States)

    Liu, Yan; Li, Yanqiu

    2016-09-01

    At present, few projection objectives for extreme ultraviolet (EUV) lithography pay attention to correct thermal aberration in optical design phase, which would lead to poor image quality in a practical working environment. We present an aspherical modification method for helping the EUV lithographic objective additionally correct the thermal aberration. Based on the thermal aberration and deformation predicted by integrated optomechanical analysis, the aspherical surfaces in an objective are modified by an iterative algorithm. The modified aspherical surfaces could correct the thermal aberration and maintain the initial high image quality in a practical working environment. A six-mirror EUV lithographic objective with 0.33-numerical aperture is taken as an example to illustrate the presented method. The results show that the thermal aberration can be corrected effectively, and the image quality of the thermally deformed system is improved to the initial design level, which proves the availability of the method.

  12. Extreme Ultraviolet Radiation With Coherence Time Beyond 1 s

    CERN Document Server

    Benko, Craig; Cingöz, Arman; Hua, Linqiang; Labaye, François; Yost, Dylan C; Ye, Jun

    2014-01-01

    Many atomic and molecular systems of fundamental interest possess resonance frequencies in the extreme ultraviolet$^{1-3}$ (XUV), where laser technology is limited and radiation sources have traditionally lacked long-term phase coherence. Recent breakthroughs in XUV frequency comb technology have demonstrated spectroscopy with resolution at the MHz-level$^{4-6}$ but even higher resolutions are desired for future applications in precision measurement. By characterizing heterodyne beats between two XUV comb sources, we demonstrate the capability for sub-Hz spectral resolution. This corresponds to coherence times $> 1$ s, at photon energies up to 20 eV, more than 6 orders of magnitude longer than previously reported. We also identify various noise contributions to the obtainable comb linewidth in the XUV. This work establishes the ability of creating highly phase stable radiation in the XUV with performance rivaling that of visible light. Further, by direct sampling of the phase of the XUV light originating from...

  13. Method for the protection of extreme ultraviolet lithography optics

    Science.gov (United States)

    Grunow, Philip A.; Clift, Wayne M.; Klebanoff, Leonard E.

    2010-06-22

    A coating for the protection of optical surfaces exposed to a high energy erosive plasma. A gas that can be decomposed by the high energy plasma, such as the xenon plasma used for extreme ultraviolet lithography (EUVL), is injected into the EUVL machine. The decomposition products coat the optical surfaces with a protective coating maintained at less than about 100 .ANG. thick by periodic injections of the gas. Gases that can be used include hydrocarbon gases, particularly methane, PH.sub.3 and H.sub.2S. The use of PH.sub.3 and H.sub.2S is particularly advantageous since films of the plasma-induced decomposition products S and P cannot grow to greater than 10 .ANG. thick in a vacuum atmosphere such as found in an EUVL machine.

  14. Controlled free-induction decay in the extreme ultraviolet

    CERN Document Server

    Bengtsson, Samuel; Kroon, David; Camp, Seth; Miranda, Miguel; Arnold, Cord L; L'Huillier, Anne; Schafer, Kenneth J; Gaarde, Mette B; Rippe, Lars; Mauritsson, Johan

    2016-01-01

    Coherent sources of attosecond extreme ultraviolet (XUV) radiation present many challenges if their full potential is to be realized. While many applications benefit from the broadband nature of these sources, it is also desirable to produce narrow band XUV pulses, or to study autoionizing resonances in a manner that is free of the broad ionization background that accompanies above-threshold XUV excitation. Here we demonstrate a method for controlling the coherent XUV free induction decay that results from using attosecond pulses to excite a gas, yielding a fully functional modulator for XUV wavelengths. We use an infrared (IR) control pulse to manipulate both the spatial and spectral phase of the XUV emission, sending the light in a direction of our choosing at a time of our choosing. This allows us to tailor the light using opto-optical modulation, similar to devices available in the IR and visible wavelength regions.

  15. Extreme Ultraviolet Transient Grating Spectroscopy of Vanadium Dioxide

    CERN Document Server

    Sistrunk, Emily; Jeong, Jaewoo; Samant, Mahesh G; Gray, Alexander X; Dürr, Hermann A; Parkin, Stuart S P; Gühr, Markus

    2014-01-01

    Nonlinear spectroscopy in the extreme ultraviolet (EUV) and soft x-ray spectral range offers the opportunity for element selective probing of ultrafast dynamics using core-valence transitions (Mukamel et al., Acc. Chem. Res. 42, 553 (2009)). We demonstrate a step on this path showing core-valence sensitivity in transient grating spectroscopy with EUV probing. We study the optically induced insulator-to-metal transition (IMT) of a VO2 film with EUV diffraction from the optically excited sample. The VO2 exhibits a change in the 3p-3d resonance of V accompanied by an acoustic response. Due to the broadband probing we are able to separate the two features.

  16. Experimental Comparison of Extreme-Ultraviolet Multilayers for Solar Physics

    Science.gov (United States)

    Windt, David L.; Donguy, Soizik; Seely, John; Kjornrattanawanich, Benjawan

    2004-03-01

    We compare the reflectance and stability of multilayers comprising either Si/Mo, Si/Mo2C, Si/B4C, Si/C, or Si/SiC bilayers, designed for use as extreme-ultraviolet (EUV) reflective coatings. The films were deposited by using magnetron sputtering and characterized by both x-ray and EUV reflectometry. We find that the new Si/SiC multilayer offers the greatest spectral selectivity at the longer wavelengths, as well as the greatest thermal stability. We also describe the optimization of multilayers designed for the Solar-B EIS instrument. Finally, we compare experimental reflectance data with calculations and conclude that currently available optical constants cannot be used to adequately model the performance of many of these multilayers.

  17. Imaging capabilities of the SODART telescopes

    DEFF Research Database (Denmark)

    Christensen, Finn Erland; Hornstrup, Allan; Pedersen, Kristian

    1998-01-01

    The on- and off-axis imaging properties and effective area of the two SODART flight telescopes have been measured using the expanded beam X-ray facility at the Daresbury synchrotron. Following measurements have been done for both Flight Model 1 & 2, at three energies: 6.627 keV, 8.837 keV and 11...

  18. Habitable Exoplanet Imager Optical Telescope Concept Design

    Science.gov (United States)

    Stahl, H Philip

    2017-01-01

    The Habitable Exoplanet Imaging Mission (HabEx) is one of four missions under study for the 2020 Astrophysics Decadal Survey. Its goal is to directly image and spectroscopically characterize planetary systems in the habitable zone of Sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by 100 to 2500 nm spectral range and 3 x 3 arc-minute FOV. Critical to achieving the HabEx science goals is a large, ultra-stable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is a 4-meter off-axis unobscured three-mirror-anastigmatic, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. This paper summarizes the opto-mechanical design of the HabEx baseline optical telescope assembly, including a discussion of how science requirements drive the telescope's specifications, and presents analysis that the baseline telescope structure meets its specified tolerances.

  19. High Speed Telescopic Imaging of Sprites

    Science.gov (United States)

    McHarg, M. G.; Stenbaek-Nielsen, H. C.; Kanmae, T.; Haaland, R. K.

    2010-12-01

    A total of 21 sprite events were recorded at Langmuir Laboratory, New Mexico, during the nights of 14 and 15 July 2010 with a 500 mm focal length Takahashi Sky 90 telescope. The camera used was a Phantom 7.3 with a VideoScope image intensifier. The images were 512x256 pixels for a field of view of 1.3x0.6 degrees. The data were recorded at 16,000 frames per second (62 μs between images) and an integration time of 20 μs per image. Co-aligned with the telescope was a second similar high-speed camera, but with an 85 mm Nikon lens; this camera recorded at 10,000 frames per second with 100 μs exposure. The image format was also 512x256 pixels for a field of view of 7.3x3.7 degrees. The 21 events recorded include all basic sprite elements: Elve, sprite halos, C-sprites, carrot sprites, and large jellyfish sprites. We compare and contrast the spatial details seen in the different types of sprites, including streamer head size and the number of streamers subsequent to streamer head splitting. Telescopic high speed image of streamer tip splitting in sprites recorded at 07:06:09 UT on 15 July 2010.

  20. Adaptive Real Time Imaging Synthesis Telescopes

    CERN Document Server

    Wright, Melvyn

    2012-01-01

    The digital revolution is transforming astronomy from a data-starved to a data-submerged science. Instruments such as the Atacama Large Millimeter Array (ALMA), the Large Synoptic Survey Telescope (LSST), and the Square Kilometer Array (SKA) will measure their accumulated data in petabytes. The capacity to produce enormous volumes of data must be matched with the computing power to process that data and produce meaningful results. In addition to handling huge data rates, we need adaptive calibration and beamforming to handle atmospheric fluctuations and radio frequency interference, and to provide a user environment which makes the full power of large telescope arrays accessible to both expert and non-expert users. Delayed calibration and analysis limit the science which can be done. To make the best use of both telescope and human resources we must reduce the burden of data reduction. Our instrumentation comprises of a flexible correlator, beam former and imager with digital signal processing closely coupled...

  1. High-resolution extreme ultraviolet spectroscopy of G191-B2B: structure of the stellar photosphere and the surrounding interstellar medium

    Science.gov (United States)

    Barstow, M. A.; Cruddace, R. G.; Kowalski, M. P.; Bannister, N. P.; Yentis, D.; Lapington, J. S.; Tandy, J. A.; Hubeny, I.; Schuh, S.; Dreizler, S.; Barbee, T. W.

    2005-10-01

    We have continued our detailed analysis of the high-resolution (R= 4000) spectroscopic observation of the DA white dwarf G191-B2B, obtained by the Joint Astrophysical Plasmadynamic Experiment (J-PEX) normal incidence sounding rocket-borne telescope, comparing the observed data with theoretical predictions for both homogeneous and stratified atmosphere structures. We find that the former models give the best agreement over the narrow waveband covered by J-PEX, in conflict with what is expected from previous studies of the lower resolution but broader wavelength coverage Extreme Ultraviolet Explorer spectra. We discuss the possible limitations of the atomic data and our understanding of the stellar atmospheres that might give rise to this inconsistency. In our earlier study, we obtained an unusually high ionization fraction for the ionized HeII present along the line of sight to the star. In the present paper, we obtain a better fit when we assume, as suggested by Space Telescope Imaging Spectrograph results, that this HeII resides in two separate components. When one of these is assigned to the local interstellar cloud, the implied He ionization fraction is consistent with measurements along other lines of sight. However, the resolving power and signal-to-noise available from the instrument configuration used in this first successful J-PEX flight are not sufficient to clearly identify and prove the existence of the two components.

  2. Extreme ultraviolet lithography mask etch study and overview

    Science.gov (United States)

    Wu, Banqiu; Kumar, Ajay; Chandrachood, Madhavi; Sabharwal, Amitabh

    2013-04-01

    An overview of extreme ultraviolet lithography (EUVL) mask etch is presented and a EUVL mask etch study was carried out. Today, EUVL implementation has three critical challenges that hinder its adoption: extreme ultraviolet (EUV) source power, resist resolution-line width roughness-sensitivity, and a qualified EUVL mask. The EUVL mask defect challenges result from defects generated during blank preparation, absorber and multilayer deposition processes, as well as patterning, etching and wet clean processes. Stringent control on several performance criteria including critical dimension (CD) uniformity, etch bias, micro-loading, profile control, defect control, and high etch selectivity requirement to capping layer is required during the resist pattern duplication on the underlying absorber layer. EUVL mask absorbers comprise of mainly tantalum-based materials rather than chrome- or MoSi-based materials used in standard optical masks. Compared to the conventional chrome-based absorbers and phase shift materials, tantalum-based absorbers need high ion energy to obtain moderate etch rates. However, high ion energy may lower resist selectivity, and could introduce defects. Current EUVL mask consists of an anti-reflective layer on top of the bulk absorber. Recent studies indicate that a native oxide layer would suffice as an anti-reflective coating layer during the electron beam inspection. The absorber thickness and the material properties are optimized based on optical density targets for the mask as well as electromagnetic field effects and optics requirements of the patterning tools. EUVL mask etch processes are modified according to the structure of the absorber, its material, and thickness. However, etch product volatility is the fundamental requirement. Overlapping lithographic exposure near chip border may require etching through the multilayer, resulting in challenges in profile control and etch selectivity. Optical proximity correction is applied to further

  3. Multilayer coatings for optics in the extreme ultraviolet

    Science.gov (United States)

    Larruquert, Juan I.; Vidal-Dasilva, Manuela; García-Cortés, Sergio; Rodríguez-de Marcos, Luis; Fernández-Perea, Mónica; Aznárez, José A.; Méndez, José A.

    2011-02-01

    The strong absorption of materials in the extreme ultraviolet (EUV) above ~50 nm has precluded the development of efficient coatings. The development of novel coatings with improved EUV performance is presented. An extensive research was performed on the search and characterization of new materials with low absorption or high reflectance. Lanthanide series was found to be a source of materials with relatively low absorption in this range, where most materials in nature present a strong absorption. Other materials, such as SiO and B, have been found to have interesting properties for applications on EUV coatings. As a result, novel multilayers based on Yb, Al, and SiO have been developed with narrowband performance in the 50-92 nm range. In some cases, the difficulty of developing narrowband coatings in the EUV can be overcome by designing multilayers that address specific purposes, such as maximizing and/or minimizing the reflectance at two or more wavelengths or bands. In this direction, we are working towards the development of coatings that combine a relatively high reflectance in a desired EUV band with a low reflectance in another band, for applications in which the presence of the latter radiation may mask a weak EUV radiation source.

  4. Kr photoionized plasma induced by intense extreme ultraviolet pulses

    Science.gov (United States)

    Bartnik, A.; Wachulak, P.; Fiedorowicz, H.; Skrzeczanowski, W.

    2016-04-01

    Irradiation of any gas with an intense EUV (extreme ultraviolet) radiation beam can result in creation of photoionized plasmas. The parameters of such plasmas can be significantly different when compared with those of the laser produced plasmas (LPP) or discharge plasmas. In this work, the photoionized plasmas were created in a krypton gas irradiated using an LPP EUV source operating at a 10 Hz repetition rate. The Kr gas was injected into the vacuum chamber synchronously with the EUV radiation pulses. The EUV beam was focused onto a Kr gas stream using an axisymmetrical ellipsoidal collector. The resulting low temperature Kr plasmas emitted electromagnetic radiation in the wide spectral range. The emission spectra were measured either in the EUV or an optical range. The EUV spectrum was dominated by emission lines originating from Kr III and Kr IV ions, and the UV/VIS spectra were composed from Kr II and Kr I lines. The spectral lines recorded in EUV, UV, and VIS ranges were used for the construction of Boltzmann plots to be used for the estimation of the electron temperature. It was shown that for the lowest Kr III and Kr IV levels, the local thermodynamic equilibrium (LTE) conditions were not fulfilled. The electron temperature was thus estimated based on Kr II and Kr I species where the partial LTE conditions could be expected.

  5. Extreme ultraviolet spectroscopy of low pressure helium microwave driven discharges

    Science.gov (United States)

    Espinho, Susana; Felizardo, Edgar; Tatarova, Elena; Alves, Luis Lemos

    2016-09-01

    Surface wave driven discharges are reliable plasma sources that can produce high levels of vacuum and extreme ultraviolet radiation (VUV and EUV). The richness of the emission spectrum makes this type of discharge a possible alternative source in EUV/VUV radiation assisted applications. However, due to challenging experimental requirements, publications concerning EUV radiation emitted by microwave plasmas are scarce and a deeper understanding of the main mechanisms governing the emission of radiation in this spectral range is required. To this end, the EUV radiation emitted by helium microwave driven plasmas operating at 2.45 GHz has been studied for low pressure conditions. Spectral lines from excited helium atoms and ions were detected via emission spectroscopy in the EUV/VUV regions. Novel data concerning the spectral lines observed in the 23 - 33 nm wavelength range and their intensity behaviour with variation of the discharge operational conditions are presented. The intensity of all the spectral emissions strongly increases with the microwave power delivered to the plasma up to 400 W. Furthermore, the intensity of all the ion spectral emissions in the EUV range decreases by nearly one order of magnitude as the pressure was raised from 0.2 to 0.5 mbar. Work funded by FCT - Fundacao para a Ciencia e a Tecnologia, under Project UID/FIS/50010/2013 and grant SFRH/BD/52412/2013 (PD-F APPLAuSE).

  6. Four-mirror extreme ultraviolet (EUV) lithography projection system

    Science.gov (United States)

    Cohen, Simon J; Jeong, Hwan J; Shafer, David R

    2000-01-01

    The invention is directed to a four-mirror catoptric projection system for extreme ultraviolet (EUV) lithography to transfer a pattern from a reflective reticle to a wafer substrate. In order along the light path followed by light from the reticle to the wafer substrate, the system includes a dominantly hyperbolic convex mirror, a dominantly elliptical concave mirror, spherical convex mirror, and spherical concave mirror. The reticle and wafer substrate are positioned along the system's optical axis on opposite sides of the mirrors. The hyperbolic and elliptical mirrors are positioned on the same side of the system's optical axis as the reticle, and are relatively large in diameter as they are positioned on the high magnification side of the system. The hyperbolic and elliptical mirrors are relatively far off the optical axis and hence they have significant aspherical components in their curvatures. The convex spherical mirror is positioned on the optical axis, and has a substantially or perfectly spherical shape. The spherical concave mirror is positioned substantially on the opposite side of the optical axis from the hyperbolic and elliptical mirrors. Because it is positioned off-axis to a degree, the spherical concave mirror has some asphericity to counter aberrations. The spherical concave mirror forms a relatively large, uniform field on the wafer substrate. The mirrors can be tilted or decentered slightly to achieve further increase in the field size.

  7. Low extreme-ultraviolet luminosities impinging on protoplanetary disks

    Energy Technology Data Exchange (ETDEWEB)

    Pascucci, I.; Hendler, N. P. [Lunar and Planetary Laboratory, The University of Arizona, Tucson, AZ 85721 (United States); Ricci, L. [Department of Astronomy, California Institute of Technology, MC 249-17, Pasadena, CA 91125 (United States); Gorti, U.; Hollenbach, D. [SETI Institute, 189 Bernardo Ave., Mountain View, CA 94043 (United States); Brooks, K. J.; Contreras, Y., E-mail: pascucci@lpl.arizona.edu [Australia Telescope National Facility, P.O. Box 76, Epping, NSW 1710 (Australia)

    2014-11-01

    The amount of high-energy stellar radiation reaching the surface of protoplanetary disks is essential to determine their chemistry and physical evolution. Here, we use millimetric and centimetric radio data to constrain the extreme-ultraviolet (EUV) luminosity impinging on 14 disks around young (∼2-10 Myr) sun-like stars. For each object we identify the long-wavelength emission in excess to the dust thermal emission, attribute that to free-free disk emission, and thereby compute an upper limit to the EUV reaching the disk. We find upper limits lower than 10{sup 42} photons s{sup –1} for all sources without jets and lower than 5 × 10{sup 40} photons s{sup –1} for the three older sources in our sample. These latter values are low for EUV-driven photoevaporation alone to clear out protoplanetary material in the timescale inferred by observations. In addition, our EUV upper limits are too low to reproduce the [Ne II] 12.81 μm luminosities from three disks with slow [Ne II]-detected winds. This indicates that the [Ne II] line in these sources primarily traces a mostly neutral wind where Ne is ionized by 1 keV X-ray photons, implying higher photoevaporative mass loss rates than those predicted by EUV-driven models alone. In summary, our results suggest that high-energy stellar photons other than EUV may dominate the dispersal of protoplanetary disks around sun-like stars.

  8. Frequency combs and precision spectroscopy in the extreme ultraviolet

    Science.gov (United States)

    Cingöz, Arman

    2012-06-01

    Development of the optical frequency comb has revolutionized optical metrology and precision spectroscopy due to its ability to provide a precise link between microwave and optical frequencies. A novel application that aims to extend the precision and accuracy obtained to the extreme ultraviolet (XUV) is the generation of XUV frequency combs via intracavity high harmonic generation (HHG). Recently, we have been able to generate > 200 μW average power per harmonic and demonstrate the comb structure of the high harmonics by resolving atomic argon and neon lines at 82 and 63 nm, respectively [1]. The argon transition linewidth of 10 MHz, limited by residual Doppler broadening, is unprecedented in this spectral region and places a stringent upper limit on the linewidth of individual comb teeth. To overcome this limitation, we have constructed two independent intracavity HHG sources to study the phase coherence directly via the heterodyne beats between them. With these developments, ultrahigh precision spectroscopy in the XUV is within grasp and has a wide range of applications that include tests of bound state quantum electrodynamics, development of nuclear clocks, and searches for variation of fundamental constants using the enhanced sensitivity of highly charged ions.[4pt] [1] Arman Cing"oz et al., Nature 482, 68 (2012).

  9. All-reflection interferometer for extreme-ultraviolet airglow studies

    Science.gov (United States)

    Cotton, Daniel M.; Chakrabarti, Supriya

    1993-12-01

    We describe a possible sounding rocket payload consisting of an interferometer that would observe O I 1304 equals angstroms solar and airglow emissions simultaneously and a low-resolution (15-angstroms) extreme ultraviolet (EUV) spectrometer with a band pass between 250 and 1050 angstroms to measure the solar EUV flux, a primary source for the O I 1304-angstroms dayglow emission. The solar measurements, the first of their kind, could provide detailed information on the column of O along the line of sight of the instrument as well as information on the full disk solar line profile, which is important to planetary as well as cometary physics. The information gained through line profile studies of the dayglow includes the relative contribution of the two main excitation mechanisms, photoelectron impact and solar resonance scattering, and a means to verify cross sections and branching ratios. All such information will substantiate sophisticated models, electron and radiative transport, that can be utilized in the remote sensing of the thermosphere.

  10. Reconstruction of Solar Extreme Ultraviolet Flux 1740-2015

    CERN Document Server

    Svalgaard, Leif

    2015-01-01

    Solar Extreme Ultraviolet (EUV) radiation creates the conducting E-layer of the ionosphere, mainly by photo ionization of molecular Oxygen. Solar heating of the ionosphere creates thermal winds which by dynamo action induce an electric field driving an electric current having a magnetic effect observable on the ground, as was discovered by G. Graham in 1722. The current rises and sets with the Sun and thus causes a readily observable diurnal variation of the geomagnetic field, allowing us the deduce the conductivity and thus the EUV flux as far back as reliable magnetic data reach. High-quality data go back to the 'Magnetic Crusade' of the 1830s and less reliable, but still usable, data are available for portions of the hundred years before that. J.R. Wolf and, independently, J.-A. Gautier discovered the dependence of the diurnal variation on solar activity, and today we understand and can invert that relationship to construct a reliable record of the EUV flux from the geomagnetic record. We compare that to t...

  11. Ablation of Submicrometer Holes Using an Extreme-Ultraviolet Laser

    Science.gov (United States)

    Rossall, Andrew K.; Aslanyan, Valentin; Tallents, Greg J.; Kuznetsov, Ilya; Rocca, Jorge J.; Menoni, Carmen S.

    2015-06-01

    Simulations and experiments are used to study extreme-ultraviolet (EUV) laser drilling of submicrometer holes. The ablation process is studied with a 2D Eulerian hydrodynamic code that includes bound-free absorption processes relevant to the interaction of EUV lasers with a solid material. Good agreement is observed between the simulated and measured ablated depths for on-target irradiances of up to 1×10 10 W cm-2 . An increase in the irradiance to 1×10 12 W cm-2 is predicted to ablate material to a depth of 3.8 μ m from a single pulse with a hole diameter 3 to 4 times larger than the focal spot size. The model allows for the simulation of the interaction of a laser pulse with the crater created by a previous shot. Multiple-pulse lower-fluence irradiation configurations under optimized focusing conditions, i.e., approaching the diffraction limit, are shown to be advantageous for applications requiring mesoscale [(100 nm )- (1 μ m ) ] features and a high level of control over the ablation profile.

  12. The Extreme Ultraviolet Spectrograph Sounding Rocket Payload: Recent Modifications for Planetary Observations in the EUV/FUV

    Science.gov (United States)

    Slater, David C.; Stern, S. Alan; Scherrer, John; Cash, Webster; Green, James C.; Wilkinson, Erik

    1995-01-01

    We report on the status of modifications to an existing extreme ultraviolet (EUV) telescope/spectrograph sounding rocket payload for planetary observations in the 800 - 1200 A wavelength band. The instrument is composed of an existing Wolter Type 2 grazing incidence telescope, a newly built 0.4-m normal incidence Rowland Circle spectrograph, and an open-structure resistive-anode microchannel plate detector. The modified payload has successfully completed three NASA sounding rocket flights within 1994-1995. Future flights are anticipated for additional studies of planetary and cometary atmospheres and interstellar absorption. A detailed description of the payload, along with the performance characteristics of the integrated instrument are presented. In addition, some preliminary flight results from the above three missions are also presented.

  13. Radiation length imaging with high resolution telescopes

    CERN Document Server

    Stolzenberg, U; Schwenker, B; Wieduwilt, P; Marinas, C; Lütticke, F

    2016-01-01

    The construction of low mass vertex detectors with a high level of system integration is of great interest for next generation collider experiments. Radiation length images with a sufficient spatial resolution can be used to measure and disentangle complex radiation length $X$/$X_0$ profiles and contribute to the understanding of vertex detector systems. Test beam experiments with multi GeV particle beams and high-resolution tracking telescopes provide an opportunity to obtain precise 2D images of the radiation length of thin planar objects. At the heart of the $X$/$X_0$ imaging is a spatially resolved measurement of the scattering angles of particles traversing the object under study. The main challenges are the alignment of the reference telescope and the calibration of its angular resolution. In order to demonstrate the capabilities of $X$/$X_0$ imaging, a test beam experiment has been conducted. The devices under test were two mechanical prototype modules of the Belle II vertex detector. A data sample of ...

  14. Multilayer coatings for the far and extreme ultraviolet

    Science.gov (United States)

    Larruquert, Juan I.; Vidal-Dasilva, Manuela; García-Cortés, Sergio; Rodríguez-de Marcos, Luis; Fernández-Perea, Mónica; Aznárez, José A.; Méndez, José A.

    2011-05-01

    We present the development of novel coatings for the far and extreme ultraviolet (FUV-EUV). In the EUV above ~50 nm, the strong absorption of materials has precluded the development of narrowband coatings. An extensive research has been performed on the search and characterization of new materials with low absorption; the lanthanide series has been found to be a source of materials with relatively low absorption in the range of interest. The discovery of a wealth of materials with relatively low EUV absorption is basic to develop efficient multilayers, particularly with narrowband properties. In this way, we have developed multilayers based on Yb, Al, and SiO with narrowband performance in the 50-92 nm range; these are first narrowband coatings peaked above 70 nm. Our recent research on multilayers based on Eu, Al, and SiO provide promising results, with an increase in the peak reflectance versus Yb/Al/SiO multilayers, along with a peak wavelength that can be extended up to ~100 nm. For applications where FUV-EUV narrowband coatings have not been able to be prepared, we can design multilayers that address specific purposes, such as maximizing the reflectance ratio at two wavelengths or bands. Our first goal in this direction is the development of coatings with high 102.6 nm/ 121.6 nm reflectance ratio. Calculations predict that a high reflectance at Lyman β with a good rejection at Lyman α can be obtained through multilayer coatings. We are at the beginning of experimental research for this goal.

  15. Advanced materials for multilayer mirrors for extreme ultraviolet solar astronomy.

    Science.gov (United States)

    Bogachev, S A; Chkhalo, N I; Kuzin, S V; Pariev, D E; Polkovnikov, V N; Salashchenko, N N; Shestov, S V; Zuev, S Y

    2016-03-20

    We provide an analysis of contemporary multilayer optics for extreme ultraviolet (EUV) solar astronomy in the wavelength ranges: λ=12.9-13.3  nm, λ=17-21  nm, λ=28-33  nm, and λ=58.4  nm. We found new material pairs, which will make new spaceborne experiments possible due to the high reflection efficiencies, spectral resolution, and long-term stabilities of the proposed multilayer coatings. In the spectral range λ=13  nm, Mo/Be multilayer mirrors were shown to demonstrate a better ratio of reflection efficiency and spectral resolution compared with the commonly used Mo/Si. In the spectral range λ=17-21  nm, a new multilayer structure Al/Si was proposed, which had higher spectral resolution along with comparable reflection efficiency compared with the commonly used Al/Zr multilayer structures. In the spectral range λ=30  nm, the Si/B4C/Mg/Cr multilayer structure turned out to best obey reflection efficiency and long-term stability. The B4C and Cr layers prevented mutual diffusion of the Si and Mg layers. For the spectral range λ=58  nm, a new multilayer Mo/Mg-based structure was developed; its reflection efficiency and long-term stability have been analyzed. We also investigated intrinsic stresses inherent for most of the multilayer structures and proposed possibilities for stress elimination.

  16. Solar extreme ultraviolet sensor and advanced langmuir probe

    Science.gov (United States)

    Voronka, N. R.; Block, B. P.; Carignan, G. R.

    1992-01-01

    For more than two decades, the staff of the Space Physics Research Laboratory (SPRL) has collaborated with the Goddard Space Flight Center (GSFC) in the design and implementation of Langmuir probes (LP). This program of probe development under the direction of Larry Brace of GSFC has evolved methodically with innovations to: improve measurement precision, increase the speed of measurement, and reduce the weight, size, power consumption and data rate of the instrument. Under contract NAG5-419 these improvements were implemented and are what characterize the Advanced Langmuir Probe (ALP). Using data from the Langmuir Probe on the Pioneer Venus Orbiter, Brace and Walter Hoegy of GSFC demonstrated a novel method of monitoring the solar extreme ultraviolet (EUV) flux. This led to the idea of developing a sensor similar to a Langmuir probe specifically designed to measure solar EUV (SEUV) that uses a similar electronics package. Under this contract, a combined instrument package of the ALP and SEUV sensor was to be designed, constructed, and laboratory tested. Finally the instrument was to be flight tested as part of sounding rocket experiment to acquire the necessary data to validate this method for possible use in future earth and planetary aeronomy missions. The primary purpose of this contract was to develop the electronics hardware and software for this instrument, since the actual sensors were suppied by GSFC. Due to budget constraints, only a flight model was constructed. These electronics were tested and calibrated in the laboratory, and then the instrument was integrated into the rocket payload at Wallops Flight Facility where it underwent environmental testing. After instrument recalibration at SPRL, the payload was reintegrated and launched from the Poker Flat Research Range near Fairbanks Alaska. The payload was successfully recovered and after refurbishment underwent further testing and developing to improve its performance for future use.

  17. Reconstruction of Solar Extreme Ultraviolet Flux 1740 - 2015

    Science.gov (United States)

    Svalgaard, Leif

    2016-11-01

    Solar extreme ultraviolet (EUV) radiation creates the conducting E-layer of the ionosphere, mainly by photo-ionization of molecular oxygen. Solar heating of the ionosphere creates thermal winds, which by dynamo action induce an electric field driving an electric current having a magnetic effect observable on the ground, as was discovered by G. Graham in 1722. The current rises and falls with the Sun, and thus causes a readily observable diurnal variation of the geomagnetic field, allowing us to deduce the conductivity and thus the EUV flux as far back as reliable magnetic data reach. High-quality data go back to the "Magnetic Crusade" of the 1830s and less reliable, but still usable, data are available for portions of the 100 years before that. J.R. Wolf and, independently, J.-A. Gautier discovered the dependence of the diurnal variation on solar activity, and today we understand and can invert that relationship to construct a reliable record of the EUV flux from the geomagnetic record. We compare that to the F_{10.7} flux and the sunspot number, and we find that the reconstructed EUV flux reproduces the F_{10.7} flux with great accuracy. On the other hand, it appears that the Relative Sunspot Number as currently defined is beginning to no longer be a faithful representation of solar magnetic activity, at least as measured by the EUV and related indices. The reconstruction suggests that the EUV flux reaches the same low (but non-zero) value at every sunspot minimum (possibly including Grand Minima), representing an invariant "solar magnetic ground state".

  18. The Extreme Ultraviolet Deficit and Magnetically Arrested Accretion in Radio Loud Quasars

    CERN Document Server

    Punsly, Brian

    2014-01-01

    The Hubble Space Telescope composite quasar spectra presented in Telfer et al. show a significant deficit of emission in the extreme ultraviolet (EUV) for the radio loud component of the quasar population (RLQs), compared to the radio quiet component of the quasar population (RQQs). The composite quasar continuum emission between 1100 \\AA\\, and $\\sim$580 \\AA\\, is generally considered to be associated with the innermost regions of the accretion flow onto the central black hole. The deficit between 1100 \\AA\\, and 580 \\AA\\, in RLQs has a straightforward interpretation as a missing or a suppressed innermost region of local energy dissipation in the accretion flow. It is proposed that this can be the result of islands of large scale magnetic flux in RLQs that are located close to the central black hole that remove energy from the accretion flow as Poynting flux (sometimes called magnetically arrested accretion). These magnetic islands are natural sites for launching relativistic jets. Based on the Telfer et al. da...

  19. Angular distribution of ions and extreme ultraviolet emission in laser-produced tin droplet plasma

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Hong; Duan, Lian; Lan, Hui [School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan 430074 (China); Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Wang, Xinbing, E-mail: xbwang@hust.edu.cn; Chen, Ziqi; Zuo, Duluo [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Lu, Peixiang [School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2015-05-21

    Angular-resolved ion time-of-flight spectra as well as extreme ultraviolet radiation in laser-produced tin droplet plasma are investigated experimentally and theoretically. Tin droplets with a diameter of 150 μm are irradiated by a pulsed Nd:YAG laser. The ion time-of-flight spectra measured from the plasma formed by laser irradiation of the tin droplets are interpreted in terms of a theoretical elliptical Druyvesteyn distribution to deduce ion density distributions including kinetic temperatures of the plasma. The opacity of the plasma for extreme ultraviolet radiation is calculated based on the deduced ion densities and temperatures, and the angular distribution of extreme ultraviolet radiation is expressed as a function of the opacity using the Beer–Lambert law. Our results show that the calculated angular distribution of extreme ultraviolet radiation is in satisfactory agreement with the experimental data.

  20. Muon imaging of volcanoes with Cherenkov telescopes

    Science.gov (United States)

    Carbone, Daniele; Catalano, Osvaldo; Cusumano, Giancarlo; Del Santo, Melania; La Parola, Valentina; La Rosa, Giovanni; Maccarone, Maria Concetta; Mineo, Teresa; Pareschi, Giovanni; Sottile, Giuseppe; Zuccarello, Luciano

    2017-04-01

    The quantitative understanding of the inner structure of a volcano is a key feature to model the processes leading to paroxysmal activity and, hence, to mitigate volcanic hazards. To pursue this aim, different geophysical techniques are utilized, that are sensitive to different properties of the rocks (elastic, electrical, density). In most cases, these techniques do not allow to achieve the spatial resolution needed to characterize the shallowest part of the plumbing system and may require dense measurements in active zones, implying a high level of risk. Volcano imaging through cosmic-ray muons is a promising technique that allows to overcome the above shortcomings. Muons constantly bombard the Earth's surface and can travel through large thicknesses of rock, with an energy loss depending on the amount of crossed matter. By measuring the absorption of muons through a solid body, one can deduce the density distribution inside the target. To date, muon imaging of volcanic structures has been mainly achieved with scintillation detectors. They are sensitive to noise sourced from (i) the accidental coincidence of vertical EM shower particles, (ii) the fake tracks initiated from horizontal high-energy electrons and low-energy muons (not crossing the target) and (iii) the flux of upward going muons. A possible alternative to scintillation detectors is given by Cherenkov telescopes. They exploit the Cherenkov light emitted when charged particles (like muons) travel through a dielectric medium, with velocity higher than the speed of light. Cherenkov detectors are not significantly affected by the above noise sources. Furthermore, contrarily to scintillator-based detectors, Cherenkov telescopes permit a measurement of the energy spectrum of the incident muon flux at the installation site, an issue that is indeed relevant for deducing the density distribution inside the target. In 2014, a prototype Cherenkov telescope was installed at the Astrophysical Observatory of Serra

  1. Volcanoes muon imaging using Cherenkov telescopes

    CERN Document Server

    Catalano, Osvaldo; Mineo, Teresa; Cusumano, Giancarlo; Maccarone, Maria Concetta; Pareschi, Giovanni

    2015-01-01

    A detailed understanding of a volcano inner structure is one of the key-points for the volcanic hazards evaluation. To this aim, in the last decade, geophysical radiography techniques using cosmic muon particles have been proposed. By measuring the differential attenuation of the muon flux as a function of the amount of rock crossed along different directions, it is possible to determine the density distribution of the interior of a volcano. Up to now, a number of experiments have been based on the detection of the muon tracks crossing hodoscopes, made up of scintillators or nuclear emulsion planes. Using telescopes based on the atmospheric Cherenkov imaging technique, we propose a new approach to study the interior of volcanoes detecting the Cherenkov light produced by relativistic cosmic-ray muons that survive after crossing the volcano. The Cherenkov light produced along the muon path is imaged as a typical annular pattern containing all the essential information to reconstruct particle direction and energ...

  2. EDITORIAL: Extreme Ultraviolet Light Sources for Semiconductor Manufacturing

    Science.gov (United States)

    Attwood, David

    2004-12-01

    The International Technology Roadmap for Semiconductors (ITRS) [1] provides industry expectations for high volume computer chip fabrication a decade into the future. It provides expectations to anticipated performance and requisite specifications. While the roadmap provides a collective projection of what international industry expects to produce, it does not specify the technology that will be employed. Indeed, there are generally several competing technologies for each two or three year step forward—known as `nodes'. Recent successful technologies have been based on KrF (248 nm), and now ArF (193 nm) lasers, combined with ultraviolet transmissive refractive optics, in what are known as step and scan exposure tools. Less fortunate technologies in the recent past have included soft x-ray proximity printing and, it appears, 157 nm wavelength F2 lasers. In combination with higher numerical aperture liquid emersion optics, 193 nm is expected to be used for the manufacture of leading edge chip performance for the coming five years. Beyond that, starting in about 2009, the technology to be employed is less clear. The leading candidate for the 2009 node is extreme ultraviolet (EUV) lithography, however this requires that several remaining challenges, including sufficient EUV source power, be overcome in a timely manner. This technology is based on multilayer coated reflective optics [2] and an EUV emitting plasma. Following Moore's Law [3] it is expected, for example, that at the 2009 `32 nm node' (printable patterns of 32 nm half-pitch), isolated lines with 18 nm width will be formed in resist (using threshold effects), and that these will be further narrowed to 13 nm in transfer to metalized electronic gates. These narrow features are expected to provide computer chips of 19 GHz clock frequency, with of the order of 1.5 billion transistors per chip [1]. This issue of Journal of Physics D: Applied Physics contains a cluster of eight papers addressing the critical

  3. Classification of mini-dimmings associated with extreme ultraviolet eruptions by using graph theory

    Directory of Open Access Journals (Sweden)

    S Bazargan

    2016-09-01

    Full Text Available Coronal dimmings in both micro and macro scales, can be observed by extreme ultraviolet images, recorded from Solar Dynamics Observatory or Atmospheric Imaging Assembly (SDO/AIA. Mini-dimmings are sometimes associated with wave-like brightening, called coronal mass ejections. Here, the sun full disk images with 171 Å wavelenght, cadence of 2.5, and  0.6 arcsec cell size, were taken on 3 March 2012, then the obtained data were analyzed. Using Zernike Moment and Support Vector Machine (SVM, mini dimmings are detected. 538 active region events, 680 coronal hole events and 723 quiet sun events have been recognized using algorithm. The position, time duration and spatial expansion of these events were computed .The eruptive dimmings have a more spatial development than thermal dimmings after eruptions. This is evident in their graph characteristics length. Then, using graph theory, eruptive and thermal mini-dimmings were classified, with 13% error, for 200 dimmings. 68 dimmings were classified as thermal, and 132 as eruptive. To do this, evolution of graph characteristic length were used.

  4. Automatic guiding of the primary image of solar Gregory telescopes

    NARCIS (Netherlands)

    Küveler, G.; Wiehr, E.; Thomas, D.; Harzer, M.; Bianda, M.; Epple, A.; Sütterlin, P.; Weisshaar, E.

    1998-01-01

    The primary image reflected from the field-stop of solar Gregory telescopes is used for automatic guiding. This new system avoids temporal varying influences from the bending of the telescope tube by the main mirror's gravity and from offsets between the telescope and a separate guiding refractor.

  5. Volcanoes muon imaging using Cherenkov telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Catalano, O. [INAF, Istituto di Astrofisica Spaziale e Fisica cosmica di Palermo, via U. La Malfa 153, I-90146 Palermo (Italy); Del Santo, M., E-mail: melania@ifc.inaf.it [INAF, Istituto di Astrofisica Spaziale e Fisica cosmica di Palermo, via U. La Malfa 153, I-90146 Palermo (Italy); Mineo, T.; Cusumano, G.; Maccarone, M.C. [INAF, Istituto di Astrofisica Spaziale e Fisica cosmica di Palermo, via U. La Malfa 153, I-90146 Palermo (Italy); Pareschi, G. [INAF Osservatorio Astronomico di Brera, Via E. Bianchi 46, I-23807, Merate (Italy)

    2016-01-21

    A detailed understanding of a volcano inner structure is one of the key-points for the volcanic hazards evaluation. To this aim, in the last decade, geophysical radiography techniques using cosmic muon particles have been proposed. By measuring the differential attenuation of the muon flux as a function of the amount of rock crossed along different directions, it is possible to determine the density distribution of the interior of a volcano. Up to now, a number of experiments have been based on the detection of the muon tracks crossing hodoscopes, made up of scintillators or nuclear emulsion planes. Using telescopes based on the atmospheric Cherenkov imaging technique, we propose a new approach to study the interior of volcanoes detecting of the Cherenkov light produced by relativistic cosmic-ray muons that survive after crossing the volcano. The Cherenkov light produced along the muon path is imaged as a typical annular pattern containing all the essential information to reconstruct particle direction and energy. Our new approach offers the advantage of a negligible background and an improved spatial resolution. To test the feasibility of our new method, we have carried out simulations with a toy-model based on the geometrical parameters of ASTRI SST-2M, i.e. the imaging atmospheric Cherenkov telescope currently under installation onto the Etna volcano. Comparing the results of our simulations with previous experiments based on particle detectors, we gain at least a factor of 10 in sensitivity. The result of this study shows that we resolve an empty cylinder with a radius of about 100 m located inside a volcano in less than 4 days, which implies a limit on the magma velocity of 5 m/h.

  6. Volcanoes muon imaging using Cherenkov telescopes

    Science.gov (United States)

    Catalano, O.; Del Santo, M.; Mineo, T.; Cusumano, G.; Maccarone, M. C.; Pareschi, G.

    2016-01-01

    A detailed understanding of a volcano inner structure is one of the key-points for the volcanic hazards evaluation. To this aim, in the last decade, geophysical radiography techniques using cosmic muon particles have been proposed. By measuring the differential attenuation of the muon flux as a function of the amount of rock crossed along different directions, it is possible to determine the density distribution of the interior of a volcano. Up to now, a number of experiments have been based on the detection of the muon tracks crossing hodoscopes, made up of scintillators or nuclear emulsion planes. Using telescopes based on the atmospheric Cherenkov imaging technique, we propose a new approach to study the interior of volcanoes detecting of the Cherenkov light produced by relativistic cosmic-ray muons that survive after crossing the volcano. The Cherenkov light produced along the muon path is imaged as a typical annular pattern containing all the essential information to reconstruct particle direction and energy. Our new approach offers the advantage of a negligible background and an improved spatial resolution. To test the feasibility of our new method, we have carried out simulations with a toy-model based on the geometrical parameters of ASTRI SST-2M, i.e. the imaging atmospheric Cherenkov telescope currently under installation onto the Etna volcano. Comparing the results of our simulations with previous experiments based on particle detectors, we gain at least a factor of 10 in sensitivity. The result of this study shows that we resolve an empty cylinder with a radius of about 100 m located inside a volcano in less than 4 days, which implies a limit on the magma velocity of 5 m/h.

  7. Opto-mechanisms design of extreme-ultraviolet camera onboard Chang E lunar lander.

    Science.gov (United States)

    Li, Zhaohui; Chen, Bo; Song, Kefei; Wang, Xiaodong; Liu, Shijie; Yang, Liang; Hu, Qinglong; Qiao, Ke; Zhang, Liping; Wu, Guodong; Yu, Ping

    2014-06-30

    The extreme-ultraviolet camera mounted on the Lander of China Chang-E lunar exploration project launched in 2013 is the first instrument used to imaging from the lunar surface to the whole plasmasphere around the earth. Taking into account both the lunar environment conditions and the weight and volume constraints, a single spherical mirror and a spherical microchannel plate detector make up the compact optical system. An optimized opto-mechanical design was presented using Finite Element Analysis Model, and the detail design for the important assemblies of the 2-axis platform, the primary mirror, the aperture door mechanism and MCP detector were all specially addressed for their environmental adaptability and reliability. Tests of mechanical characteristics have demonstrated that the position and pointing accuracy and its stability meets the operation requirements of 2'. Vibration results have shown that the EUVC has adequate stiffness and strength safety margin to survive in launch and the moon environments. The imaging performance with the resolution of 0.08° is measured after vibration, in agreement with the predicted performance.

  8. Wafer and reticle positioning system for the Extreme Ultraviolet Lithography Engineering Test Stand

    Energy Technology Data Exchange (ETDEWEB)

    WRONOSKY,JOHN B.; SMITH,TONY G.; CRAIG,MARCUS J.; STURGIS,BEVERLY R.; DARNOLD,JOEL R.; WERLING,DAVID K.; KINCY,MARK A.; TICHENOR,DANIEL A.; WILLIAMS,MARK E.; BISCHOFF,PAUL

    2000-01-27

    This paper is an overview of the wafer and reticle positioning system of the Extreme Ultraviolet Lithography (EUVL) Engineering Test Stand (ETS). EUVL represents one of the most promising technologies for supporting the integrated circuit (IC) industry's lithography needs for critical features below 100nm. EUVL research and development includes development of capabilities for demonstrating key EUV technologies. The ETS is under development at the EUV Virtual National Laboratory, to demonstrate EUV full-field imaging and provide data that supports production-tool development. The stages and their associated metrology operated in a vacuum environment and must meet stringent outgassing specifications. A tight tolerance is placed on the stage tracking performance to minimize image distortion and provide high position repeatability. The wafer must track the reticle with less than {+-}3nm of position error and jitter must not exceed 10nm rms. To meet these performance requirements, magnetically levitated positioning stages utilizing a system of sophisticated control electronics will be used. System modeling and experimentation have contributed to the development of the positioning system and results indicate that desired ETS performance is achievable.

  9. Wavelet Analysis of Space Solar Telescope Images

    Institute of Scientific and Technical Information of China (English)

    Xi-An Zhu; Sheng-Zhen Jin; Jing-Yu Wang; Shu-Nian Ning

    2003-01-01

    The scientific satellite SST (Space Solar Telescope) is an important research project strongly supported by the Chinese Academy of Sciences. Every day,SST acquires 50 GB of data (after processing) but only 10GB can be transmitted to the ground because of limited time of satellite passage and limited channel volume.Therefore, the data must be compressed before transmission. Wavelets analysis is a new technique developed over the last 10 years, with great potential of application.We start with a brief introduction to the essential principles of wavelet analysis,and then describe the main idea of embedded zerotree wavelet coding, used for compressing the SST images. The results show that this coding is adequate for the job.

  10. Extreme ultraviolet detection using AlGaN-on-Si inverted Schottky photodiodes

    Science.gov (United States)

    Malinowski, Pawel E.; Duboz, Jean-Yves; De Moor, Piet; Minoglou, Kyriaki; John, Joachim; Horcajo, Sara Martin; Semond, Fabrice; Frayssinet, Eric; Verhoeve, Peter; Esposito, Marco; Giordanengo, Boris; BenMoussa, Ali; Mertens, Robert; Van Hoof, Chris

    2011-04-01

    We report on the fabrication of aluminum gallium nitride (AlGaN) Schottky diodes for extreme ultraviolet (EUV) detection. AlGaN layers were grown on silicon wafers by molecular beam epitaxy with the conventional and inverted Schottky structure, where the undoped, active layer was grown before or after the n-doped layer, respectively. Different current mechanisms were observed in the two structures. The inverted Schottky diode was designed for the optimized backside sensitivity in the hybrid imagers. A cut-off wavelength of 280 nm was observed with three orders of magnitude intrinsic rejection ratio of the visible radiation. Furthermore, the inverted structure was characterized using a EUV source based on helium discharge and an open electrode design was used to improve the sensitivity. The characteristic He I and He II emission lines were observed at the wavelengths of 58.4 nm and 30.4 nm, respectively, proving the feasibility of using the inverted layer stack for EUV detection.

  11. Visualizing the local optical response to extreme-ultraviolet radiation with a resolution of λ/380

    Science.gov (United States)

    Tamasaku, Kenji; Sawada, Kei; Nishibori, Eiji; Ishikawa, Tetsuya

    2011-09-01

    Scientists have continually tried to improve the spatial resolution of imaging ever since the invention of the optical microscope in around 1610 by Galileo. Recently, a spatial resolution near λ/10 was achieved in a near-field scheme by using surface plasmon polaritons. However, further improvement in this direction is hindered by the size of metallic nanostructures. Here we show that atom-scale resolution is achievable in the extreme-ultraviolet region by using X-ray parametric down-conversion, which detaches the achievable resolution from the wavelength of the probe light. We visualize three-dimensionally the local optical response of diamond at wavelengths between 103 and 206Å with a resolution as fine as 0.54Å. This corresponds to a resolution from λ/190 to λ/380, an order of magnitude better than ever achieved. Although the present study focuses on the relatively high-energy optical regions, our method could be extended into the visible region using advanced X-ray sources, and would open a new window into the optical properties of solids.

  12. Comparative study of line roughness metrics of chemically amplified and inorganic resists for extreme ultraviolet

    Science.gov (United States)

    Fallica, Roberto; Buitrago, Elizabeth; Ekinci, Yasin

    2016-07-01

    We present a comprehensive comparative study of the roughness metrics of different resists. Dense line/space of polymethyl methacrylate, hydrogen silsesquioxane, a metal oxide-based resist, and different chemically amplified resists (CARs) have been patterned by extreme ultraviolet interference lithography. All three line width roughness (LWR) metrics: the root-mean-square (r.m.s.) roughness value σLWR, the correlation length ξ, and the roughness exponent α, were extracted by metrological analysis of top-down SEM images. We found that all metrics are required to fully describe the overall roughness of each resist. Our measurements indicate that in fact, a few of the state-of-the-art resists tested here can meet the International Technology Roadmap for Semiconductors requirements for σLWR. The correlation length ξ was also found to be considerably higher in polymer-based materials in comparison to nonpolymers. Finally, the roughness exponent α, interpreted using the concept of fractal geometry, was found to be mainly affected by acid diffusion in CARs, where it produces line edges with a higher complexity than in non-CAR resists. These results indicate that the different resists platforms show very different LWR metrics and roughness is not manifested only in the σLWR but in all parameters. Therefore, all roughness metrics should be taken into account when comparing the performance among different resists since they ultimately have a substantial impact on device performance.

  13. On the Nature of the Extreme-Ultraviolet Late Phase of Solar Flares

    CERN Document Server

    Li, Y; Guo, Y; Dai, Y

    2014-01-01

    The extreme-ultraviolet (EUV) late phase of solar flares is a second peak of warm coronal emissions (e.g., Fe XVI) for many minutes to a few hours after the GOES soft X-ray peak. It was first observed by the EUV Variability Experiment (EVE) on board the Solar Dynamics Observatory (SDO). The late phase emission originates from a second set of longer loops (late phase loops) that are higher than the main flaring loops. It is suggested as being caused by either additional heating or long-lasting cooling. In this paper, we study the role of long-lasting cooling and additional heating in producing the EUV late phase using the "enthalpy-based thermal evolution of loops" (EBTEL) model. We find that a long cooling process in late phase loops can well explain the presence of the EUV late phase emission, but we cannot exclude the possibility of additional heating in the decay phase. Moreover, we provide two preliminary methods based on the UV and EUV emissions from the Atmospheric Imaging Assembly (AIA) on board SDO to...

  14. Extreme Ultraviolet Variability Experiment (EVE) Multiple EUV Grating Spectrographs (MEGS): Radiometric Calibrations and Results

    Science.gov (United States)

    Hock, R. A.; Woods, T. N.; Crotser, D.; Eparvier, F. G.; Woodraska, D. L.; Chamberlin, P. C.; Woods, E. C.

    2010-01-01

    The NASA Solar Dynamics Observatory (SDO), scheduled for launch in early 2010, incorporates a suite of instruments including the Extreme Ultraviolet Variability Experiment (EVE). EVE has multiple instruments including the Multiple Extreme ultraviolet Grating Spectrographs (MEGS) A, B, and P instruments, the Solar Aspect Monitor (SAM), and the Extreme ultraviolet SpectroPhotometer (ESP). The radiometric calibration of EVE, necessary to convert the instrument counts to physical units, was performed at the National Institute of Standards and Technology (NIST) Synchrotron Ultraviolet Radiation Facility (SURF III) located in Gaithersburg, Maryland. This paper presents the results and derived accuracy of this radiometric calibration for the MEGS A, B, P, and SAM instruments, while the calibration of the ESP instrument is addressed by Didkovsky et al. . In addition, solar measurements that were taken on 14 April 2008, during the NASA 36.240 sounding-rocket flight, are shown for the prototype EVE instruments.

  15. Earth-orbiting extreme ultraviolet spectroscopic mission: SPRINT-A/EXCEED

    Science.gov (United States)

    Yoshikawa, I.; Tsuchiya, F.; Yamazaki, A.; Yoshioka, K.; Uemizu, K.; Murakami, G.; Kimura, T.; Kagitani, M.; Terada, N.; Kasaba, Y.; Sakanoi, T.; Ishii, H.; Uji, K.

    2012-09-01

    The EXCEED (Extreme Ultraviolet Spectroscope for Exospheric Dynamics) mission is an Earth-orbiting extreme ultraviolet (EUV) spectroscopic mission and the first in the SPRINT series being developed by ISAS/JAXA. It will be launched in the summer of 2013. EUV spectroscopy is suitable for observing tenuous gases and plasmas around planets in the solar system (e.g., Mercury, Venus, Mars, Jupiter, and Saturn). Advantage of remote sensing observation is to take a direct picture of the plasma dynamics and distinguish between spatial and temporal variability explicitly. One of the primary observation targets is an inner magnetosphere of Jupiter, whose plasma dynamics is dominated by planetary rotation. Previous observations have shown a few percents of the hot electron population in the inner magnetosphere whose temperature is 100 times higher than the background thermal electrons. Though the hot electrons have a significant impact on the energy balance in the inner magnetosphere, their generation process has not yet been elucidated. In the EUV range, a number of emission lines originate from plasmas distributed in Jupiter's inner magnetosphere. The EXCEED spectrograph is designed to have a wavelength range of 55-145 nm with minimum spectral resolution of 0.4 nm, enabling the electron temperature and ion composition in the inner magnetosphere to be determined. Another primary objective is to investigate an unresolved problem concerning the escape of the atmosphere to space. Although there have been some in-situ observations by orbiters, our knowledge is still limited. The EXCEED mission plans to make imaging observations of plasmas around Venus and Mars to determine the amounts of escaping atmosphere. The instrument's field of view (FOV) is so wide that we can get an image from the interaction region between the solar wind and planetary plasmas down to the tail region at one time. This will provide us with information about outward-flowing plasmas, e.g., their composition

  16. Imaging Atmospheric Cerenkov Telescopes Techniques and Results

    CERN Document Server

    Bradbury, S M

    2001-01-01

    The hunt for cosmic TeV particle accelerators is prospering through Imaging Atmospheric Cerenkov Telescopes. We face challenges such as low light levels and MHz trigger rates, and the need to distinguish between particle air showers stemming from primary gamma rays and those due to the hadronic cosmic ray background. Our test beam is provided by the Crab Nebula, a steady accelerator of particles to energies beyond 20 TeV. Highly variable gamma-ray emission, coincident with flares at longer wavelengths, is revealing the particle acceleration mechanisms at work in the relativistic jets of Active Galaxies. These 200 GeV to 20 TeV photons propagating over cosmological distances allow us to place a limit on the infra-red background linked to galaxy formation and, some speculate, to the decay of massive relic neutrinos. Gamma rays produced in neutralino annihilation or the evaporation of primordial black holes may also be detectable. These phenomena and a zoo of astrophysical objects will be the targets of the next...

  17. A beamline for time-resolved extreme ultraviolet and soft x-ray spectroscopy

    CERN Document Server

    Grilj, Jakob; Koch, Markus; Gühr, Markus

    2013-01-01

    High harmonic generation is a convenient way to obtain extreme ultraviolet light from table-top laser systems and the experimental tools to exploit this simple and powerful light source for time-resolved spectroscopy are being developed by several groups. For these applications, brightness and stability of the high harmonic generation is a key feature. This article focuses on practical aspects in the generation of extreme ultraviolet pulses with ultrafast commercial lasers, namely generation parameters and online monitoring as well as analysis of generation yield and stability.

  18. Testing of Radiation Hardness in the Extreme-Ultraviolet Spectral Region

    Science.gov (United States)

    Arp, U.; Ermanoski, I.; Tarrio, C.; Grantham, S.; Hill, S.; Dhez, P.; Lucatorto, T. B.

    2007-01-01

    Currently we are commissioning a second multilayer-based beamline to study the radiation hardness of multilayers under extreme-ultraviolet (EUV) irradiation in an oxidizing atmosphere. Multilayer lifetime is one of the most important issues for the commercialization of extreme-ultraviolet lithography. The beamline employs a spherical multilayer mirror and a beryllium filter. The mirror demagnifies the source and reflects 13.4 nm radiation as well as visible light. The beryllium filter suppresses the visible light reflected by the mirror and provides also a barrier between the extremely clean storage ring vacuum and the water atmosphere of the test chamber.

  19. Sub-diffraction-limited multilayer coatings for the 0.3-NA Micro-Exposure Tool for extreme ultraviolet lithography

    Energy Technology Data Exchange (ETDEWEB)

    Soufli, R; Hudyma, R M; Spiller, E; Gullikson, E M; Schmidt, M A; Robinson, J C; Baker, S L; Walton, C C; Taylor, J S

    2007-01-03

    This manuscript discusses the multilayer coating results for the primary and secondary mirrors of the Micro Exposure Tool (MET): a 0.30-numerical aperture (NA) lithographic imaging system with 200 x 600 {micro}m{sup 2} field of view at the wafer plane, operating in the extreme ultraviolet (EUV) wavelength region. Mo/Si multilayers were deposited by DC-magnetron sputtering on large-area, curved MET camera substrates, and a velocity modulation technique was implemented to consistently achieve multilayer thickness profiles with added figure errors below 0.1 nm rms to achieve sub-diffraction-limited performance. This work represents the first experimental demonstration of sub-diffraction-limited multilayer coatings for high-NA EUV imaging systems.

  20. Novel optical scanning cryptography using Fresnel telescope imaging.

    Science.gov (United States)

    Yan, Aimin; Sun, Jianfeng; Hu, Zhijuan; Zhang, Jingtao; Liu, Liren

    2015-07-13

    We propose a new method called modified optical scanning cryptography using Fresnel telescope imaging technique for encryption and decryption of remote objects. An image or object can be optically encrypted on the fly by Fresnel telescope scanning system together with an encryption key. For image decryption, the encrypted signals are received and processed with an optical coherent heterodyne detection system. The proposed method has strong performance through use of secure Fresnel telescope scanning with orthogonal polarized beams and efficient all-optical information processing. The validity of the proposed method is demonstrated by numerical simulations and experimental results.

  1. VERITAS The Very Energetic Radiation Imaging Telescope Array System

    CERN Document Server

    Weekes, T C; Biller, S D; Breslin, A C; Buckley, J H; Carter-Lewis, D A; Catanese, M; Cawley, M F; Dingus, B L; Fazio, G G; Fegan, D J; Finley, J; Fishman, G; Gaidos, J A; Gillanders, G H; Gorham, P W; Grindlay, J E; Hillas, A M; Huchra, J P; Kaaret, P E; Kertzman, M P; Kieda, D B; Krennrich, F; Lamb, R C; Lang, M J; Marscher, A P; Matz, S; McKay, T; Müller, D; Ong, R; Purcell, W; Rose, J; Sembroski, G H; Seward, F D; Slane, P O; Swordy, S P; Tümer, T O; Ulmer, M P; Urban, M; Wilkes, B J

    1997-01-01

    A next generation atmospheric Cherenkov observatory is described based on the Whipple Observatory $\\gamma$-ray telescope. A total of nine such imaging telescopes will be deployed in an array that will permit the maximum versatility and give high sensitivity in the 50 GeV - 50 TeV band (with maximum sensitivity from 100 GeV to 10 TeV).

  2. Observation of molecular hyperfine structure in the extreme ultraviolet: The HF C-X spectrum

    NARCIS (Netherlands)

    Philippson, J.N.; Shiell, R.C.; Reinhold, E.M.; Ubachs, W.M.G.

    2008-01-01

    Clearly resolved hyperfine structure has been observed in the extreme ultraviolet (XUV) spectra of the C (1)Pi, v=0-X (1)Sigma(+), v=0 transition of (HF)-F-19 obtained through 1 XUV+1 UV resonance enhanced multiphoton ionization spectroscopy. The hyperfine splitting within the R-branch lines shows

  3. Network search method in the design of extreme ultraviolet lithographic objectives

    NARCIS (Netherlands)

    Marinescu, O.; Bociort, F.

    2007-01-01

    The merit function space of mirror system for extreme ultraviolet (EUV) lithography is studied. Local minima situated in the multidimensional optical merit function space are connected via links that contain saddle points and form a network. We present networks for EUV lithographic objective designs

  4. Extreme ultraviolet (EUV) source and ultra-high vacuum chamber for studying EUV-induced processes

    NARCIS (Netherlands)

    Dolgov, A.; Yakushev, O.; Abrikosov, A.; Snegirev, E.; Krivtsun, V.M.; Lee, C.J.; Bijkerk, F.

    2015-01-01

    An experimental setup that directly reproduces extreme ultraviolet (EUV) lithography relevant conditions for detailed component exposure tests is described. The EUV setup includes a pulsed plasma radiation source, operating at 13.5 nm; a debris mitigation system; collection and filtering optics; and

  5. Carbon-induced extreme ultraviolet reflectance loss characterized using visible-light ellipsometry

    NARCIS (Netherlands)

    Chen, J. Q.; E. Louis,; Wormeester, H.; Harmsen, R.; van de Kruijs, R.; Lee, C. J.; van Schaik, W.; F. Bijkerk,

    2011-01-01

    Carbon deposition on extreme ultraviolet (EUV) optics was observed due to photon-induced dissociation of hydrocarbons in a EUV lithography environment. The reflectance loss of the multilayer mirror is determined by the carbon layer thickness and density. To study the influence of various forms of ca

  6. Ion-beam-deposited boron carbide coatings for the extreme ultraviolet.

    Science.gov (United States)

    Blumenstock, G M; Keski-Kuha, R A

    1994-09-01

    The normal-incidence reflectance of ion-beam-deposited boron carbide thin films has been evaluated in the extreme ultraviolet (EUV) spectral region. High-reflectance coatings have been produced with reflectances greater than 30% between 67 and 121.6 nm. This high reflectance makes ion-beam-deposited boron carbide an attractive coating for EUV applications.

  7. Soft X-rays and extreme ultraviolet radiation principles and applications

    CERN Document Server

    Attwood, David

    1999-01-01

    This self-contained, comprehensive book describes the fundamental properties of soft X-rays and extreme ultraviolet (EUV) radiation and discusses their applications in a wide variety of fields, including EUV lithography for semiconductor chip manufacture and soft X-ray biomicroscopy. The book will be of great interest to graduate students, researchers and practising engineers.

  8. Narrowband and tunable anomalous transmission filters for special monitoring in the extreme ultraviolet wavelength region

    NARCIS (Netherlands)

    Barreaux, J.L.P.; Kozhevnikov, I.V.; Bayraktar, Muharrem; van de Kruijs, Robbert Wilhelmus Elisabeth; Bastiaens, Hubertus M.J.; Bijkerk, Frederik; Boller, Klaus J.

    2017-01-01

    We present the first experimental demonstration of a novel type of narrowband and wavelength-tunable multilayer transmission filter for the extreme ultraviolet (EUV) region. The operating principle of the filter is based on spatially overlapping the nodes of a standing wave field with the absorbing

  9. Focused helium and neon ion beam induced etching for advanced extreme ultraviolet lithography mask repair

    NARCIS (Netherlands)

    Gonzalez, Carlos M.; Timilsina, Rajendra; Li, Guoliang; Duscher, Gerd; Rack, Philip D.; Slingenbergh, Winand; van Dorp, Willem F.; De Hosson, Jeff T. M.; Klein, Kate L.; Wu, Huimeng M.; Stern, Lewis A.

    2014-01-01

    The gas field ion microscope was used to investigate helium and neon ion beam induced etching of nickel as a candidate technique for extreme ultraviolet (EUV) lithography mask editing. No discernable nickel etching was observed for room temperature helium exposures at 16 and 30 keV in the dose range

  10. Spectral and spatial structure of extreme ultraviolet radiation in laser plasma-wall interactions

    NARCIS (Netherlands)

    Kuznetsov, A. S.; Stuik, R.; F. Bijkerk,; Shevelko, A. P.

    2012-01-01

    Intense extreme ultraviolet (XUV) radiation was observed during the interaction of low-temperature laser plasmas and wall materials. Laser plasmas with electron temperature T-e similar to 40 eV were created on massive solid targets (CF2 and Al) by an excimer KrF laser (248 nm/0.5 J/13 ns/1 Hz). The

  11. Initiation and Early Evolution of the Coronal Mass Ejection on 2009 May 13 from Extreme-ultraviolet and White-light Observations

    Science.gov (United States)

    Reva, A. A.; Ulyanov, A. S.; Bogachev, S. A.; Kuzin, S. V.

    2014-10-01

    We present the results of the observations of a coronal mass ejection (CME) that occurred on 2009 May 13. The most important feature of these observations is that the CME was observed from the very early stage (the solar surface) up to a distance of 15 solar radii (R ⊙). Below 2 R ⊙, we used the data from the TESIS extreme-ultraviolet telescopes obtained in the Fe 171 Å and He 304 Å lines, and above 2 R ⊙, we used the observations of the LASCO C2 and C3 coronagraphs. The CME was formed at a distance of 0.2-0.5R ⊙ from the Sun's surface as a U-shaped structure, which was observed both in the 171 Å images and in the white light. Observations in the He 304 Å line showed that the CME was associated with an erupting prominence, which was not located above—as the standard model predicts—but rather in the lowest part of the U-shaped structure close to the magnetic X point. The prominence location can be explained with the CME breakout model. Estimates showed that CME mass increased with time. The CME trajectory was curved—its heliolatitude decreased with time. The CME started at a latitude of 50° and reached the ecliptic plane at distances of 2.5 R ⊙. The CME kinematics can be divided into three phases: initial acceleration, main acceleration, and propagation with constant velocity. After the CME, onset GOES registered a sub-A-class flare.

  12. Initiation and early evolution of the coronal mass ejection on 2009 May 13 from extreme-ultraviolet and white-light observations

    Energy Technology Data Exchange (ETDEWEB)

    Reva, A. A.; Ulyanov, A. S.; Bogachev, S. A.; Kuzin, S. V., E-mail: reva.antoine@gmail.com [Lebedev Physical Institute, Russian Academy of Sciences, 53 Leninskij Prospekt, 119991 Moscow (Russian Federation)

    2014-10-01

    We present the results of the observations of a coronal mass ejection (CME) that occurred on 2009 May 13. The most important feature of these observations is that the CME was observed from the very early stage (the solar surface) up to a distance of 15 solar radii (R {sub ☉}). Below 2 R {sub ☉}, we used the data from the TESIS extreme-ultraviolet telescopes obtained in the Fe 171 Å and He 304 Å lines, and above 2 R {sub ☉}, we used the observations of the LASCO C2 and C3 coronagraphs. The CME was formed at a distance of 0.2-0.5R {sub ☉} from the Sun's surface as a U-shaped structure, which was observed both in the 171 Å images and in the white light. Observations in the He 304 Å line showed that the CME was associated with an erupting prominence, which was not located above—as the standard model predicts—but rather in the lowest part of the U-shaped structure close to the magnetic X point. The prominence location can be explained with the CME breakout model. Estimates showed that CME mass increased with time. The CME trajectory was curved—its heliolatitude decreased with time. The CME started at a latitude of 50° and reached the ecliptic plane at distances of 2.5 R {sub ☉}. The CME kinematics can be divided into three phases: initial acceleration, main acceleration, and propagation with constant velocity. After the CME, onset GOES registered a sub-A-class flare.

  13. THE HIGH-RESOLUTION EXTREME-ULTRAVIOLET SPECTRUM OF N{sub 2} BY ELECTRON IMPACT

    Energy Technology Data Exchange (ETDEWEB)

    Heays, A. N. [Leiden Observatory, Leiden University, P.O. Box 9513, 2300 RA Leiden (Netherlands); Ajello, J. M.; Aguilar, A. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Lewis, B. R.; Gibson, S. T., E-mail: heays@strw.leidenuniv.nl [Research School of Physics and Engineering, The Australian National University, Canberra, ACT 0200 (Australia)

    2014-04-01

    We have analyzed high-resolution (FWHM = 0.2 Å) extreme-ultraviolet (EUV, 800-1350 Å) laboratory emission spectra of molecular nitrogen excited by an electron impact at 20 and 100 eV under (mostly) optically thin, single-scattering experimental conditions. A total of 491 emission features were observed from N{sub 2} electronic-vibrational transitions and atomic N I and N II multiplets and their emission cross sections were measured. Molecular emission was observed at vibrationally excited ground-state levels as high as v'' = 17, from the a {sup 1}Π {sub g} , b {sup 1}Π {sub u} , and b'{sup 1}Σ {sub u} {sup +} excited valence states and the Rydberg series c'{sub n} {sub +1} {sup 1}Σ {sub u} {sup +}, c{sub n} {sup 1}Π {sub u} , and o{sub n} {sup 1}Π {sub u} for n between 3 and 9. The frequently blended molecular emission bands were disentangled with the aid of a sophisticated and predictive quantum-mechanical model of excited states that includes the strong coupling between valence and Rydberg electronic states and the effects of predissociation. Improved model parameters describing electronic transition moments were obtained from the experiment and allowed for a reliable prediction of the vibrationally summed electronic emission cross section, including an extrapolation to unobserved emission bands and those that are optically thick in the experimental spectra. Vibrationally dependent electronic excitation functions were inferred from a comparison of emission features following 20 and 100 eV electron-impact collisional excitation. The electron-impact-induced fluorescence measurements are compared with Cassini Ultraviolet Imaging Spectrograph observations of emissions from Titan's upper atmosphere.

  14. A chain of winking (oscillating) filaments triggered by an invisible extreme-ultraviolet wave

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Yuandeng; Tian, Zhanjun; Zhao, Ruijuan [Yunnan Observatories, Chinese Academy of Sciences, Kunming 650011 (China); Ichimoto, Kiyoshi; Ishii, Takako T.; Shibata, Kazunari, E-mail: ydshen@ynao.ac.cn [Kwasan and Hida Observatories, Kyoto University, Yamashina-ku, Kyoto 607-8471 (Japan)

    2014-05-10

    Winking (oscillating) filaments have been observed for many years. However, observations of successive winking filaments in one event have not yet been reported. In this paper, we present the observations of a chain of winking filaments and a subsequent jet that are observed right after the X2.1 flare in AR11283. The event also produced an extreme-ultraviolet (EUV) wave that has two components: an upward dome-like wave (850 km s{sup –1}) and a lateral surface wave (554 km s{sup –1}) that was very weak (or invisible) in imaging observations. By analyzing the temporal and spatial relationships between the oscillating filaments and the EUV waves, we propose that all the winking filaments and the jet were triggered by the weak (or invisible) lateral surface EUV wave. The oscillation of the filaments last for two or three cycles, and their periods, Doppler velocity amplitudes, and damping times are 11-22 minutes, 6-14 km s{sup –1}, and 25-60 minutes, respectively. We further estimate the radial component magnetic field and the maximum kinetic energy of the filaments, and they are 5-10 G and ∼10{sup 19} J, respectively. The estimated maximum kinetic energy is comparable to the minimum energy of ordinary EUV waves, suggesting that EUV waves can efficiently launch filament oscillations on their path. Based on our analysis results, we conclude that the EUV wave is a good agent for triggering and connecting successive but separated solar activities in the solar atmosphere, and it is also important for producing solar sympathetic eruptions.

  15. Internal frequency conversion extreme ultraviolet interferometer using mutual coherence properties of two high-order-harmonic sources

    Energy Technology Data Exchange (ETDEWEB)

    Dobosz, S.; Stabile, H.; Tortora, A.; Monot, P.; Reau, F.; Bougeard, M.; Merdji, H.; Carre, B.; Martin, Ph. [CEA, IRAMIS, Service des Photons Atomes et Molecules, F-91191 Gif- sur-Yvette (France); Joyeux, D.; Phalippou, D.; Delmotte, F.; Gautier, J.; Mercier, R. [Laboratoire Charles Fabry de l' Institut d' Optique, CNRS et Universite Paris Sud, Campus Polytechnique, RD 128, F-91127 Palaiseau cedex (France)

    2009-11-15

    We report on an innovative two-dimensional imaging extreme ultraviolet (XUV) interferometer operating at 32 nm based on the mutual coherence of two laser high order harmonics (HOH) sources, separately generated in gas. We give the first evidence that the two mutually coherent HOH sources can be produced in two independent spatially separated gas jets, allowing for probing centimeter-sized objects. A magnification factor of 10 leads to a micron resolution associated with a subpicosecond temporal resolution. Single shot interferograms with a fringe visibility better than 30% are routinely produced. As a test of the XUV interferometer, we measure a maximum electronic density of 3x10{sup 20} cm{sup -3} 1.1 ns after the creation of a plasma on aluminum target.

  16. Polarimetry of extreme ultraviolet lines in solar astronomy

    Science.gov (United States)

    Fineschi, Silvano; Hoover, Richard B.; Fontenla, Juan M.; Walker, Arthur B. C., Jr.

    1991-01-01

    Ways are suggested in which recent advancements in the fabrication of ultrasmooth, low scatter flow-polished mirror substrates and high-quality multilayer and interference film coatings can be used to create novel optical instruments for observing linear-polarization effects in the outer solar atmosphere. Attention is given to the observational parameters of all-reflective FUV/EUV imaging polarimeters; such a coronagraph/polarimeter, operating at Ly-alpha, could yield the first measurements of coronal vector magnetic fields.

  17. Corner Rounding in Photoresists for Extreme Ultraviolet Lithography

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Christopher N.; Naulleau, Patrick; Deng, Yunfei; Wallow, Thomas

    2008-06-01

    Deprotection blur in EUV resists fundamentally limits the smallest sized dense features that can be patterned in a single exposure and development step. Several metrics have recently been developed to explore the ways that different resist and process parameters affect the deprotection blur in EUV resists. One of these metrics is based on the imaging fidelity of a sharp corner on a large feature. As this metric has involved the close inspection of printing fidelity of corner features, it has brought attention to an interesting phenomena: corners print differently whether or not the remaining resist edge contains 270 degrees of resist or 90 degrees of resist. Here we present experimental data across a wide sampling of leading resists to show this effect is real and reproducible. They provide aerial image modeling results assuming thin and realistic mask models that show no corner bias between the aerial images in the 90-degree and 270-degree configurations. They also compare modeled patterning results assuming several resist models including the single blur, dual blur, and Prolith models, none of which reproduce the corner biasing that is observed experimentally.

  18. X-rays and extreme ultraviolet radiation principles and applications

    CERN Document Server

    Attwood, David

    2016-01-01

    With this fully updated second edition, readers will gain a detailed understanding of the physics and applications of modern X-ray and EUV radiation sources. Taking into account the most recent improvements in capabilities, coverage is expanded to include new chapters on free electron lasers (FELs), laser high harmonic generation (HHG), X-ray and EUV optics, and nanoscale imaging; a completely revised chapter on spatial and temporal coherence; and extensive discussion of the generation and applications of femtosecond and attosecond techniques. Readers will be guided step by step through the mathematics of each topic, with over 300 figures, 50 reference tables and 600 equations enabling easy understanding of key concepts. Homework problems, a solutions manual for instructors, and links to YouTube lectures accompany the book online. This is the 'go-to' guide for graduate students, researchers and industry practitioners interested in X-ray and EUV interaction with matter.

  19. Evaluation of photomask flatness compensation for extreme ultraviolet lithography

    Science.gov (United States)

    Ballman, Katherine; Lee, Christopher; Zimmerman, John; Dunn, Thomas; Bean, Alexander

    2016-10-01

    As the semiconductor industry continues to strive towards high volume manufacturing for EUV, flatness specifications for photomasks have decreased to below 10nm for 2018 production, however the current champion masks being produced report P-V flatness values of roughly 50nm. Write compensation presents the promising opportunity to mitigate pattern placement errors through the use of geometrically adjusted target patterns which counteract the reticle's flatness induced distortions and address the differences in chucking mechanisms between e-beam write and electrostatic clamping during scan. Compensation relies on high accuracy flatness data which provides the critical topographical components of the reticle to the write tool. Any errors included in the flatness data file are translated to the pattern during the write process, which has now driven flatness measurement tools to target a 6σ reproducibility write compensation is validated against printed wafer results. Topographic features which lack compensation capability must then be held to stringent specifications in order to limit their contributions to the final image placement error (IPE) at wafer. By understanding the capabilities and limitations of write compensation, it is then possible to shift flatness requirements towards the "non-correctable" portion of the reticle's profile, potentially relieving polishers from having to adhere to the current single digit flatness specifications.

  20. Comparison of solar radio and extreme ultraviolet synoptic limb charts during the present solar maximum

    Science.gov (United States)

    Oliveira e Silva, A. J.; Selhorst, C. L.; Simões, P. J. A.; Giménez de Castro, C. G.

    2016-08-01

    Aims: The present solar cycle is particular in many aspects: it had a delayed rising phase, it is the weakest of the last 100 yrs, and it presents two peaks separated by more than one year. To understand the impact of these characteristics on the solar chromosphere and coronal dynamics, images from a wide wavelength range are needed. In this work we use the 17 GHz radio continuum, which is formed in the upper chromosphere and the extreme ultraviolet (EUV) lines 304 and 171 Å, that come from the transition region (He ii, T ~ 6-8 × 104 K) and the corona (Fe IX, X, T ~ 106 K), respectively.We extend upon a previous similar analysis, and compare the mean equatorial and polar brightening behavior at radio and EUV wavelengths during the maximum of the present solar cycle, covering the period between 2010 and 2015. Methods: We analyze daily images at 304 and 171 Å obtained by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). The 17 GHz maps were obtained by the Nobeyama Radioheliograph (NoRH). To construct synoptic limb charts, we calculated the mean emission of delimited limb areas with 100'' wide and angular separation of 5°. Results: At the equatorial region, the results show a hemispheric asymmetry of the solar activity. The northern hemisphere dominance is coincident with the first sunspot number peak, whereas the second peak occurs concurrently with the increase in the activity at the south. The polar emission reflects the presence of coronal holes at both EUV wavelengths, moreover, the 17 GHz polar brightenings can be associated with the coronal holes. Until 2013, both EUV coronal holes and radio polar brightenings were more predominant at the south pole.Since then they have not been apparent in the north, but thus appear in the beginning of 2015 in the south as observed in the synoptic charts. Conclusions: This work strengthens the association between coronal holes and the 17 GHz polar brightenings as it is evident in the

  1. A World-Wide Network of Robotic Imaging Telescopes

    Science.gov (United States)

    McGruder, C., III; Barnaby, D.; Carini, M.; Gelderman, R.; Hackney, K.; Hackney, R.; Marchenko, S.; Scott, R.; Yan, Li; Chen, Wen-Ping

    The long-term monitoring of AGNs and massive stars, the search for extrasolar planets via the transit method and the detection of unpredictable transient events such as gamma-ray bursts require continuous observations by a world-wide network of telescopes. Two telescopes of this network are located in the USA (Kitt Peak and Kentucky). Western Kentucky University (USA) along with National Central University (Taiwan) and Yunnan Observatory (China) plan to place a fully robotic imaging telescope at Gao Meigu in Li Jiang, China.

  2. Supersonic cluster jet source for debris-free extreme ultraviolet production

    Energy Technology Data Exchange (ETDEWEB)

    Kubiak, G.D.; Bernardez, L.J.

    1997-09-01

    The supersonic cluster jet has been developed and characterized for use as a target medium to produce a clean source of extreme ultraviolet radiation for extreme ultraviolet lithography and other applications. Spectroscopic characterization of the laser plasma emission produced from Xe, O{sub 2} and Kr cluster gas targets has been performed. Xe is the most efficient target gas, exhibiting a conversion efficiency at 13.5 nm of 0.8% into the relevant 2.5% spectral bandwidth. The other target gases are less efficient in the spectral region of interest and, in the case of oxygen, emit {approximately}5 times less off-band radiation. The angular distribution of the Xe plasma emission has also been characterized.

  3. Carbon coatings for extreme-ultraviolet high-order laser harmonics

    Energy Technology Data Exchange (ETDEWEB)

    Coraggia, S.; Frassetto, F. [CNR-Institute of Photonics and Nanotechnologies, Laboratory for UV and X-Ray Optical Research, via Trasea 7, 35131 Padova (Italy); Aznarez, J.A.; Larruquert, J.I.; Mendez, J.A. [GOLD-Instituto de Optica-Consejo Superior de Investigaciones Cientificas, Serrano 144, 28006 Madrid (Spain); Negro, M.; Stagira, S.; Vozzi, C. [Department of Physics-Politecnico of Milano and CNR-Institute of Photonics and Nanotechnologies, Piazza Leonardo Da Vinci 32, 20133 Milano (Italy); Poletto, L., E-mail: poletto@dei.unipd.i [CNR-Institute of Photonics and Nanotechnologies, Laboratory for UV and X-Ray Optical Research, via Trasea 7, 35131 Padova (Italy)

    2011-04-11

    The experimental study of the optical properties of thin carbon films to be used as grazing-incidence coatings for extreme-ultraviolet high-order harmonics is presented. The carbon samples were deposited on plane glass substrates by the electron beam evaporation technique. The optical constants (real and imaginary parts of the refraction index) have been calculated through reflectivity measurements. The results are in good agreement with what reported in the literature, and confirm that carbon-coated optics operated at grazing incidence have a remarkable gain over conventional metallic coatings in the extreme ultraviolet. Since the harmonics co-propagate with the intense infrared laser generating beam, the carbon damage threshold when exposed to ultrashort infrared laser pulses has been measured.

  4. Estimation of resist sensitivity for extreme ultraviolet lithography using an electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Oyama, Tomoko Gowa, E-mail: ohyama.tomoko@qst.go.jp [Quantum Beam Science Research Directorate, National Institutes for Quantum and Radiological Science and Technology, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Oshima, Akihiro; Tagawa, Seiichi, E-mail: tagawa@sanken.osaka-u.ac.jp [Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan); The Institute of Scientific and Industrial Research, Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan)

    2016-08-15

    It is a challenge to obtain sufficient extreme ultraviolet (EUV) exposure time for fundamental research on developing a new class of high sensitivity resists for extreme ultraviolet lithography (EUVL) because there are few EUV exposure tools that are very expensive. In this paper, we introduce an easy method for predicting EUV resist sensitivity by using conventional electron beam (EB) sources. If the chemical reactions induced by two ionizing sources (EB and EUV) are the same, the required absorbed energies corresponding to each required exposure dose (sensitivity) for the EB and EUV would be almost equivalent. Based on this theory, we calculated the resist sensitivities for the EUV/soft X-ray region. The estimated sensitivities were found to be comparable to the experimentally obtained sensitivities. It was concluded that EB is a very useful exposure tool that accelerates the development of new resists and sensitivity enhancement processes for 13.5 nm EUVL and 6.x nm beyond-EUVL (BEUVL).

  5. Galileo's Instruments of Credit Telescopes, Images, Secrecy

    CERN Document Server

    Biagioli, Mario

    2006-01-01

    In six short years, Galileo Galilei went from being a somewhat obscure mathematics professor running a student boarding house in Padua to a star in the court of Florence to the recipient of dangerous attention from the Inquisition for his support of Copernicanism. In that brief period, Galileo made a series of astronomical discoveries that reshaped the debate over the physical nature of the heavens: he deeply modified the practices and status of astronomy with the introduction of the telescope and pictorial evidence, proposed a radical reconfiguration of the relationship between theology and a

  6. The Extreme Ultraviolet Spectrum of the Kinetically Dominated Quasar 3C 270.1

    CERN Document Server

    Punsly, Brian

    2015-01-01

    Only a handful of quasars have been identified as kinetically dominated, their long term time averaged jet power, $\\overline{Q}$, exceeds the bolometric thermal emission, $L_{bol}$, associated with the accretion flow. This letter presents the first extreme ultraviolet (EUV) spectrum of a kinetically dominated quasar, 3C 270.1. The EUV continuum flux density of 3C 270.1 is very steep, $F_{\

  7. Damage of multilayer optics with varying capping layers induced by focused extreme ultraviolet beam

    Energy Technology Data Exchange (ETDEWEB)

    Jody Corso, Alain; Nicolosi, Piergiorgio; Nardello, Marco; Guglielmina Pelizzo, Maria [National Research Council of Italy, Institute for Photonics and Nanotechnology, via Trasea 7, 35131 Padova (Italy); Department of Information Engineering, University of Padova, via Gradenigo 6/B, 35131 Padova (Italy); Zuppella, Paola [National Research Council of Italy, Institute for Photonics and Nanotechnology, via Trasea 7, 35131 Padova (Italy); Barkusky, Frank [Laser-Laboratorium Goettingen e.V, Goettingen (Germany); KLA-Tencor, 5 Technology Dr., Milpitas, California 95035 (United States); Mann, Klaus; Mueller, Matthias [Laser-Laboratorium Goettingen e.V, Goettingen (Germany)

    2013-05-28

    Extreme ultraviolet Mo/Si multilayers protected by capping layers of different materials were exposed to 13.5 nm plasma source radiation generated with a table-top laser to study the irradiation damage mechanism. Morphology of single-shot damaged areas has been analyzed by means of atomic force microscopy. Threshold fluences were evaluated for each type of sample in order to determine the capability of the capping layer to protect the structure underneath.

  8. Comparing Vacuum and Extreme Ultraviolet Radiation for Postionization of Laser Desorbed Neutrals from Bacterial Biofilms and Organic Fullerene

    Energy Technology Data Exchange (ETDEWEB)

    Gaspera, Gerald L.; Takahashi, Lynelle K.; Zhou, Jia; Ahmed, Musahid; Moored, Jerry F.; Hanley, Luke

    2010-12-08

    Vacuum and extreme ultraviolet radiation from 8 - 24 eV generated at a synchrotron was used to postionize laser desorbed neutrals of antibiotic-treated biofilms and a modified fullerene using laser desorption postionization mass spectrometry (LDPI-MS). Results show detection of the parent ion, various fragments, and extracellular material from biofilms using LDPI-MS with both vacuum and extreme ultraviolet photons. Parent ions were observed for both cases, but extreme ultraviolet photons (16-24 eV) induced more fragmentation than vacuum ultraviolet (8-14 eV) photons.

  9. Extreme Ultraviolet Variability Experiment (EVE) Multiple EUV Grating Spectrographs (MEGS): Radiometric Calibrations and Results

    Science.gov (United States)

    Hock, R. A.; Chamberlin, P. C.; Woods, T. N.; Crotser, D.; Eparvier, F. G.; Woodraska, D. L.; Woods, E. C.

    2012-01-01

    The NASA Solar Dynamics Observatory (SDO), scheduled for launch in early 2010, incorporates a suite of instruments including the Extreme Ultraviolet Variability Experiment (EVE). EVE has multiple instruments including the Multiple Extreme ultraviolet Grating Spectrographs (MEGS) A, B, and P instruments, the Solar Aspect Monitor (SAM), and the Extreme ultraviolet SpectroPhotometer (ESP). The radiometric calibration of EVE, necessary to convert the instrument counts to physical units, was performed at the National Institute of Standards and Technology (NIST) Synchrotron Ultraviolet Radiation Facility (SURF III) located in Gaithersburg, Maryland. This paper presents the results and derived accuracy of this radiometric calibration for the MEGS A, B, P, and SAM instruments, while the calibration of the ESP instrument is addressed by Didkovsky et al. ( Solar Phys., 2010, doi:10.1007/s11207-009-9485-8). In addition, solar measurements that were taken on 14 April 2008, during the NASA 36.240 sounding-rocket flight, are shown for the prototype EVE instruments.

  10. EUV SpectroPhotometer (ESP) in Extreme Ultraviolet Variability Experiment (EVE): Algorithms and Calibrations

    CERN Document Server

    Didkovsky, Leonid; Wieman, Seth; Woods, Tom; Jones, Andrew

    2009-01-01

    The Extreme ultraviolet SpectroPhotometer (ESP) is one of five channels of the Extreme ultraviolet Variability Experiment (EVE) onboard the NASA Solar Dynamics Observatory (SDO). The ESP channel design is based on a highly stable diffraction transmission grating and is an advanced version of the Solar Extreme ultraviolet Monitor (SEM), which has been successfully observing solar irradiance onboard the Solar and Heliospheric Observatory (SOHO) since December 1995. ESP is designed to measure solar Extreme UltraViolet (EUV) irradiance in four first order bands of the diffraction grating centered around 19 nm, 25 nm, 30 nm, and 36 nm, and in a soft X-ray band from 0.1 to 7.0 nm in the zeroth order of the grating. Each band's detector system converts the photo-current into a count rate (frequency). The count rates are integrated over 0.25 sec increments and transmitted to the EVE Science and Operations Center for data processing. An algorithm for converting the measured count rates into solar irradiance and the ES...

  11. Spectroscopy of the extreme-ultraviolet source Feige 24 - The binary orbit and the mass of the white dwarf

    Science.gov (United States)

    Thorstensen, J. R.; Charles, P. A.; Bowyer, S.; Margon, B.

    1978-01-01

    Results are reported for coude spectroscopy of the extreme-ultraviolet white dwarf Feige 24. Radial velocities of the H-alpha, He I 5876-A, and He I 6678-A emission lines, and the underlying M-dwarf absorption features, were determined from spectrograms obtained with the Lick 3-m telescope. The velocities show a binary period of 4.239(+ or - 0.0015) days. The emission-line and absorption-line velocities agree in phase, which indicates that the emission lines originate in the atmosphere of the M-dwarf secondary as a result of reprocessing of the EUV radiation. This effect is modeled, and the observed amplitude of the emission-line variability is used to place a lower limit on the orbital inclination. From these and other data it is shown that the mass of the white dwarf lies between 0.46 and 1.24 solar masses. Some possible implications for the evolution of binary stars are briefly discussed.

  12. Fundamental Imaging Limits of Radio Telescope Arrays

    CERN Document Server

    Wijnholds, Stefan J; 10.1109/JSTSP.2008.2004216

    2010-01-01

    The fidelity of radio astronomical images is generally assessed by practical experience, i.e. using rules of thumb, although some aspects and cases have been treated rigorously. In this paper we present a mathematical framework capable of describing the fundamental limits of radio astronomical imaging problems. Although the data model assumes a single snapshot observation, i.e. variations in time and frequency are not considered, this framework is sufficiently general to allow extension to synthesis observations. Using tools from statistical signal processing and linear algebra, we discuss the tractability of the imaging and deconvolution problem, the redistribution of noise in the map by the imaging and deconvolution process, the covariance of the image values due to propagation of calibration errors and thermal noise and the upper limit on the number of sources tractable by self calibration. The combination of covariance of the image values and the number of tractable sources determines the effective noise ...

  13. Stress evolution in molybdenum/silicon multilayer mirrors for extreme ultraviolet lithography

    Science.gov (United States)

    Freitag, James Mac

    The continued shrinking of microelectronic device size necessitates advances in lithography, including possibly using extreme ultraviolet (EUV) light. The Mo/Si multilayer system is a promising candidate for reflective optics at a wavelength of roughly 135 A. However, these multilayers manifest high compressive stresses of approximately -350 MPa, which cause unacceptable distortion of the optical element. The goal of this project was to develop fundamental understanding of the origins of stress during growth of Mo/Si multilayers. A 40-bilayer structure deposited by DC-magnetron sputtering yielded a peak reflectivity of 65.7% at a wavelength of 136 A. We collected the stress data during deposition by in situ substrate curvature measurements using a multiple parallel laser beam technique. We measured large tensile and compressive curvature transients during initial growth of Mo on Si and Si on Mo. However, by sputtering with Kr rather than conventional Ar, it is possible to suppress the compressive transient upon Si deposition and thereby redress the compressive stress. Evidence implies that intermixing and alloying at the Mo-Si interfaces by asymmetric Si diffusion cause the transients. Indeed, Mo/Si multilayers sputtered with Kr exhibit less intermixing and high EUV reflectivity. However, the roughness of the multilayer may limit reflectivity and we therefore compare the roughness of Kr- and Ar-sputtered multilayers. Roughness, which leads to nonspecular scattering is problematic for EUV imaging systems because it decreases the useful throughput of a lithography system. We used x-ray diffraction to characterize the evolution of roughness with increasing number of bilayers in Mo/Si multilayers sputtered by Ar and Kr. By fitting a self-affine model of roughness to the diffuse spectra, we extracted the roughness and in-plane correlation lengths. We find that the lateral length scale of the roughness increases with the number of bilayers; however, the magnitude of the

  14. In-orbit Calibrations of the Ultraviolet Imaging Telescope

    Science.gov (United States)

    Tandon, S. N.; Subramaniam, Annapurni; Girish, V.; Postma, J.; Sankarasubramanian, K.; Sriram, S.; Stalin, C. S.; Mondal, C.; Sahu, S.; Joseph, P.; Hutchings, J.; Ghosh, S. K.; Barve, I. V.; George, K.; Kamath, P. U.; Kathiravan, S.; Kumar, A.; Lancelot, J. P.; Leahy, D.; Mahesh, P. K.; Mohan, R.; Nagabhushana, S.; Pati, A. K.; Kameswara Rao, N.; Sreedhar, Y. H.; Sreekumar, P.

    2017-09-01

    The Ultra-Violet Imaging Telescope (UVIT) is one of the payloads in ASTROSAT, the first Indian Space Observatory. The UVIT instrument has two 375 mm telescopes: one for the far-ultraviolet (FUV) channel (1300–1800 Å), and the other for the near-ultraviolet (NUV) channel (2000–3000 Å) and the visible (VIS) channel (3200–5500 Å). UVIT is primarily designed for simultaneous imaging in the two ultraviolet channels with spatial resolution better than 1.″8, along with provisions for slit-less spectroscopy in the NUV and FUV channels. The results of in-orbit calibrations of UVIT are presented in this paper.

  15. Parallel Image Reconstruction for New Vacuum Solar Telescope

    Science.gov (United States)

    Li, Xue-Bao; Wang, Feng; Xiang, Yong Yuan; Zheng, Yan Fang; Liu, Ying Bo; Deng, Hui; Ji, Kai Fan

    2014-04-01

    Many advanced ground-based solar telescopes improve the spatial resolution of observation images using an adaptive optics (AO) system. As any AO correction remains only partial, it is necessary to use post-processing image reconstruction techniques such as speckle masking or shift-and-add (SAA) to reconstruct a high-spatial-resolution image from atmospherically degraded solar images. In the New Vacuum Solar Telescope (NVST), the spatial resolution in solar images is improved by frame selection and SAA. In order to overcome the burden of massive speckle data processing, we investigate the possibility of using the speckle reconstruction program in a real-time application at the telescope site. The code has been written in the C programming language and optimized for parallel processing in a multi-processor environment. We analyze the scalability of the code to identify possible bottlenecks, and we conclude that the presented code is capable of being run in real-time reconstruction applications at NVST and future large aperture solar telescopes if care is taken that the multi-processor environment has low latencies between the computation nodes.

  16. Habitable Exoplanet Imager Optical Telescope Concept Design

    Science.gov (United States)

    Stahl, H. Philip

    2017-01-01

    Habitable Exoplanet Imaging Mission (HabEx) is a concept for a mission to directly image and characterize planetary systems around Sun-like stars. In addition to the search for life on Earth-like exoplanets, HabEx will enable a broad range of general astrophysics science enabled by 100 to 2500 nm spectral range and 3 x 3 arc-minute FOV. HabEx is one of four mission concepts currently being studied for the 2020 Astrophysics Decadal Survey.

  17. Imaging the gamma-ray sky with Compton telescopes

    Energy Technology Data Exchange (ETDEWEB)

    von Ballmoos, P.; Diehl, R.; Schoenfelder, V. (Max-Planck-Institut fuer Physik and Astrophysik, Garching (DE). Inst. fuer. Extraterrestrische Physik); von Ballmoos, P. (New Hampshire Univ., Durham (UK). Space Science Center); von Ballmoos, P. (Toulouse-3 Univ., 31 (FR). Centre d' Etude spatiale des Rayonnements)

    1989-09-01

    Compton telescopes can overcome the difficulties that so far delayed mapping of the low energy gamma ray sky. Since these instruments are ideally matched to the MeV energy range they have a unique potential to produce images of it. However, the multi-coincidence nature of photon detection results in complex data analysis. This paper describes the imaging characteristics of Compton telescopes, and it presents an algorithm for the generation of skymaps which has been successfully applied to data from different Compton telescopes. The algorithm generates maps of likelihood ratios by taking advantage of background symmetries of the instrument and its environment. The resulting skymaps have been found to indicate source positions reliably.

  18. Theoretical study of relationships among resolution, line width roughness, and sensitivity of chemically amplified extreme ultraviolet resists with photodecomposable quenchers

    Science.gov (United States)

    Kozawa, Takahiro; Santillan, Julius Joseph; Itani, Toshiro

    2016-11-01

    The resolution of chemically amplified extreme ultraviolet (EUV) resists has reached 13-15 nm. However, the line width roughness (LWR) and sensitivity are still inadequate for their application to the high-volume production of semiconductor devices. In this study, the performance of chemically amplified resists with photodecomposable quenchers were investigated by simulation based on the sensitization and reaction mechanisms of chemically amplified EUV resists. The relationships among resolution, LWR, and sensitivity were evaluated in the half-pitch ranges of 12-16 nm. The requirements for 20 mJ cm-2 and 10% critical dimension (CD) LWR are considered to be within the physical limits in the half-pitch range of 12-16 nm when an optical image with a contrast of 1 (normalized image log slope of π) is given. Depending on the given image quality and the required sensitivity, the optimization of sensitizer concentration and the increase in resist absorption coefficient and/or effective reaction radius for deprotection are required to achieve 10% CD LWR.

  19. EUV SpectroPhotometer (ESP) in Extreme Ultraviolet Variability Experiment (EVE): Algorithms and Calibrations

    Science.gov (United States)

    Didkovsky, L.; Judge, D.; Wieman, S.; Woods, T.; Jones, A.

    2012-01-01

    The Extreme ultraviolet SpectroPhotometer (ESP) is one of five channels of the Extreme ultraviolet Variability Experiment (EVE) onboard the NASA Solar Dynamics Observatory (SDO). The ESP channel design is based on a highly stable diffraction transmission grating and is an advanced version of the Solar Extreme ultraviolet Monitor (SEM), which has been successfully observing solar irradiance onboard the Solar and Heliospheric Observatory (SOHO) since December 1995. ESP is designed to measure solar Extreme UltraViolet (EUV) irradiance in four first-order bands of the diffraction grating centered around 19 nm, 25 nm, 30 nm, and 36 nm, and in a soft X-ray band from 0.1 to 7.0 nm in the zeroth-order of the grating. Each band’s detector system converts the photo-current into a count rate (frequency). The count rates are integrated over 0.25-second increments and transmitted to the EVE Science and Operations Center for data processing. An algorithm for converting the measured count rates into solar irradiance and the ESP calibration parameters are described. The ESP pre-flight calibration was performed at the Synchrotron Ultraviolet Radiation Facility of the National Institute of Standards and Technology. Calibration parameters were used to calculate absolute solar irradiance from the sounding-rocket flight measurements on 14 April 2008. These irradiances for the ESP bands closely match the irradiance determined for two other EUV channels flown simultaneously: EVE’s Multiple EUV Grating Spectrograph (MEGS) and SOHO’s Charge, Element and Isotope Analysis System/ Solar EUV Monitor (CELIAS/SEM).

  20. Note: Enhancement of the extreme ultraviolet emission from a potassium plasma by dual laser irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Higashiguchi, Takeshi, E-mail: higashi@cc.utsunomiya-u.ac.jp; Yamaguchi, Mami; Otsuka, Takamitsu; Nagata, Takeshi [Department of Advanced Interdisciplinary Sciences and Center for Optical Research (CORE), Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 Japan (Japan); Ohashi, Hayato [Graduate School of Science and Engineering for Research, University of Toyama, Toyama, Toyama 930-8555 (Japan); Li, Bowen [School of Nuclear Science and Technology, Lanzhou University, Lanzhou, 730000 (China); School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland); D’Arcy, Rebekah; Dunne, Padraig; O’Sullivan, Gerry [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland)

    2014-09-15

    Emission spectra from multiply charged potassium ions ranging from K{sup 3+} to K{sup 5+} have been obtained in the extreme ultraviolet (EUV) spectral region. A strong emission feature peaking around 38 nm, corresponding to a photon energy of 32.6 eV, is the dominant spectral feature at time-averaged electron temperatures in the range of 8−12 eV. The variation of this emission with laser intensity and the effects of pre-pulses on the relative conversion efficiency (CE) have been explored experimentally and indicate that an enhancement of about 30% in EUV CE is readily attainable.

  1. Dissociative multiple ionization of diatomic molecules by extreme-ultraviolet free-electron-laser pulses

    DEFF Research Database (Denmark)

    Madsen, Lars Bojer; Leth, Henriette Astrup

    2011-01-01

    Nuclear dynamics in dissociative multiple ionization processes of diatomic molecules exposed to extreme-ultraviolet free-electron-laser pulses is studied theoretically using the Monte Carlo wave packet approach. By simulated detection of the emitted electrons, the model reduces a full propagation...... of the system to propagations of the nuclear wave packet in one specific electronic charge state at a time. Suggested ionization channels can be examined, and kinetic energy release spectra for the nuclei can be calculated and compared with experiments. Double ionization of O2 is studied as an example, and good...

  2. Interferometric time delay correction for Fourier transform spectroscopy in the extreme ultraviolet

    Science.gov (United States)

    Meng, Yijian; Zhang, Chunmei; Marceau, Claude; Naumov, A. Yu.; Corkum, P. B.; Villeneuve, D. M.

    2016-09-01

    We demonstrate a Fourier transform spectrometer in the extreme ultraviolet (XUV) spectrum using a high-harmonic source, with wavelengths as short as 32 nm. The femtosecond infrared laser source is divided into two separate foci in the same gas jet to create two synchronized XUV sources. An interferometric method to determine the relative delay between the two sources is shown to improve the accuracy of the delay time, with corrections of up to 200 asec required. By correcting the time base before the Fourier transform, the frequency resolution is improved by up to an order of magnitude.

  3. Prospects of extreme ultraviolet radiation sources based on microwave discharge for high-resolution lithography

    Science.gov (United States)

    Abramov, I. S.; Gospodchikov, E. D.; Shalashov, A. G.

    2017-07-01

    In this paper, inspired by the success of recent experiments, we discuss a new possible type of sources of extreme ultraviolet radiation for the semiconductor industry, based on the radiating plasma with multiply charged ions supported in a mirror magnetic trap by high-power microwaves. We propose a simple theory that describes the main features of such source, perform modeling for a wide range of plasma parameters and magnetic configurations, compare the results to the existing experimental data, and study the prospects of the new scheme in present technological circumstances.

  4. Oxidation resistance and microstructure of Ru-capped extreme ultraviolet lithography multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Bajt, S; Dai, Z; Nelson, E J; Wall, M A; Alameda, J B; Nguyen, N; Baker, S L; Robinson, J C; Taylor, J S; Aquila, A; Edwards, N V

    2005-06-15

    The oxidation resistance of protective capping layers for extreme ultraviolet lithography (EUVL) multilayers depends on their microstructure. Differently prepared Ru-capping layers, deposited on Mo/Si EUVL multilayers, were investigated to establish their baseline structural, optical, and surface properties in as-deposited state. The same capping layer structures were then tested for their thermal stability and oxidation resistance. The best performing Ru-capping layer structure was analyzed in detail with transmission electron microscopy (TEM). As compared to other Ru capping layers preparations studied here it is the only one that shows grains with preferential orientation. This information is essential for modeling and performance optimization of EUVL multilayers.

  5. Properites of ultrathin films appropriate for optics capping layers in extreme ultraviolet lithography (EUVL)

    Energy Technology Data Exchange (ETDEWEB)

    Bajt, S; Edwards, N V; Madey, T E

    2007-06-25

    The contamination of optical surfaces by irradiation shortens optics lifetime and is one of the main concerns for optics used in conjunction with intense light sources, such as high power lasers, 3rd and 4th generation synchrotron sources or plasma sources used in extreme ultraviolet lithography (EUVL) tools. This paper focuses on properties and surface chemistry of different materials, which as thin layers, could be used as capping layers to protect and extend EUVL optics lifetime. The most promising candidates include single element materials such as ruthenium and rhodium, and oxides such as TiO{sub 2} and ZrO{sub 2}.

  6. Using All Sky Imaging to Improve Telescope Scheduling

    Science.gov (United States)

    Cole, Gary M.

    2017-06-01

    Automated scheduling makes it possible for a small telescope to observe a large number of targets in a single night. But when used in areas which have less-than-perfect sky conditions such automation can lead to large numbers of observations of clouds and haze. This paper describes the development of a "sky-aware" telescope automation system that integrates the data flow from an SBIG AllSky340c camera with an enhanced dispatch scheduler to make optimum use of the available observing conditions for two highly instrumented backyard telescopes. Using the minute by minute time series image stream and a self maintained reference database, the software maintains a file of sky brightness, transparency, stability, and forecasted visibility at several hundred grid positions. The scheduling software uses this information in real time to exclude targets obscured by clouds and select the best observing task, taking into account the requirements and limits of each instrument.

  7. Imaging telescope-spectrometer for infrared sky surveys

    Science.gov (United States)

    Maslov, Igor A.; Sholomitskii, Gennadii B.; Kuznetsov, Arkadii E.; Patrashin, Michail A.; Olejnikov, Leonid S.

    1995-06-01

    A new type of imaging telescope-spectrometer for surviving the sky aboard a satellite is described. A static Michelson interferometer in front of an objective with 2D-arrays in its focal plane is capable of providing interferograms both for point and extended sources. As an example, the telescope-spectrometer based on the 15-cm telescope of the IKON project and a plane-parallel Ge plate as a beamsplitter may have approximately equals 30 cm(superscript -1 spectral resolution in the range 3 - 20 micrometers . For higher resolution, such an objective interferometer has advantage over a dispersion spectrometer in the signal-to-noise ratio and is free from the disadvantage of an objective prism not providing spectra of extended sources.

  8. The Very Energetic Radiation Imaging Telescope Array System (VERITAS)

    CERN Document Server

    Bradbury, S M; Breslin, A C; Buckley, J H; Carter-Lewis, D A; Catanese, M; Criswell, S; Dingus, B L; Fegan, D J; Finley, J P; Gaidos, J A; Grindlay, J; Hillas, A M; Harris, K; Hermann, G; Kaaret, P E; Kieda, D B; Knapp, J; Krennrich, F; Le Bohec, S; Lessard, R W; Lloyd-Evans, J; McKernan, B; Müller, D; Ong, R; Quenby, J J; Quinn, J; Rochester, G D; Rose, H J; Salamon, M B; Sembroski, G H; Sumner, T J; Swordy, S P; Vasilev, V; Weekes, T C

    1999-01-01

    We give an overview of the current status and scientific goals of VERITAS, a proposed hexagonal array of seven 10 m aperture imaging Cherenkov telescopes. The selected site is Montosa Canyon (1390 m a.s.l.) at the Whipple Observatory, Arizona. Each telescope, of 12 m focal length, will initially be equipped with a 499 element photomultiplier camera covering a 3.5 degree field of view. A central station will initiate the readout of 500 MHz FADCs upon receipt of multiple telescope triggers. The minimum detectable flux sensitivity will be 0.5% of the Crab Nebula flux at 200 GeV. Detailed simulations of the array's performance are presented elsewhere at this meeting. VERITAS will operate primarily as a gamma-ray observatory in the 50 GeV to 50 TeV range for the study of active galaxies, supernova remnants, pulsars and gamma-ray bursts.

  9. The major atmospheric gamma-ray imaging Cherenkov telescope

    Science.gov (United States)

    Garczarczyk, Markus; MAGIC Collaboration

    2011-05-01

    MAGIC is a system of two 17 m diameter Imaging Atmospheric Cherenkov Telescopes (IACTs) for ground-based γ-ray astronomy. During many years, starting with the design phase of the first telescope in 2003, the upgrade of the second telescope in 2008 up to now, novel technologies have been developed, commissioned and continuously improved. Most components and subsystems represent nowadays state of the art techniques and are under consideration to be used in future detectors. The large reflector area, together with small diameter, high quantum efficiency (QE) photomultipliers (PMTs) in combination with an improved trigger and readout system permits an analysis threshold of 25 GeV, the lowest among current IACTs. MAGIC overlaps in energy with the upper end of current satellite experiments and gives the unique opportunity, for the first time, to cross-calibrate ground based versus satellite born detectors. Some selected techniques used in MAGIC, which are in context with this conference, are presented.

  10. Pupil geometry and pupil re-imaging in telescope arrays

    Science.gov (United States)

    Traub, Wesley A.

    1990-01-01

    This paper considers the issues of lateral and longitudinal pupil geometry in ground-based telescope arrays, such as IOTA. In particular, it is considered whether or not pupil re-imaging is required before beam combination. By considering the paths of rays through the system, an expression is derived for the optical path errors in the combined wavefront as a function of array dimensions, telescope magnification factor, viewing angle, and field-of-view. By examining this expression for the two cases of pupil-plane and image-plane combination, operational limits can be found for any array. As a particular example, it is shown that for IOTA no pupil re-imaging optics will be needed.

  11. Tests & Calibration on Ultra Violet Imaging Telescope (UVIT)

    CERN Document Server

    Kumar, Amit; Kamath, P U; Postma, Joe; Kathiravan, S; Mahesh, P K; S, Nagbhushana; Navalgund, K H; Rajkumar, N; Rao, M N; Sarma, K S; Sriram, S; Stalin, C S; Tandon, S N

    2012-01-01

    Ultra Violet Imaging Telescope on ASTROSAT Satellite mission is a suite of Far Ultra Violet (FUV; 130 to 180 nm), Near Ultra Violet (NUV; 200 to 300 nm) and Visible band (VIS; 320 to 550nm) imagers. ASTROSAT is a first multi wavelength mission of INDIA. UVIT will image the selected regions of the sky simultaneously in three channels & observe young stars, galaxies, bright UV Sources. FOV in each of the 3 channels is about 28 arc-minute. Targeted angular resolution in the resulting UV images is better than 1.8 arc-second (better than 2.0 arc-second for the visible channel). Two identical co-aligned telescopes (T1, T2) of Ritchey-Chretien configuration (Primary mirror of 375 mm diameter) collect the celestial radiation and feed to the detector system via a selectable filter on a filter wheel mechanism; gratings are available in the filter wheels of FUV and NUV channels for slit-less low resolution spectroscopy. The detector system for each of the 3 channels is generically identical. One telescope images in ...

  12. Space Telescope Sensitivity and Controls for Exoplanet Imaging

    Science.gov (United States)

    Lyon, Richard G.; Clampin, Mark

    2012-01-01

    Herein we address design considerations and outline requirements for space telescopes with capabilities for high contrast imaging of exoplanets. The approach taken is to identify the span of potentially detectable Earth-sized terrestrial planets in the habitable zone of the nearest stars within 30 parsecs and estimate their inner working angles, flux ratios, SNR, sensitivities, wavefront error requirements and sensing and control times parametrically versus aperture size. We consider 1, 2, 4, 8 and 16-meter diameter telescope apertures. The achievable science, range of telescope architectures, and the coronagraphic approach are all active areas of research and are all subject to change in a rapidly evolving field. Thus, presented is a snapshot of our current understanding with the goal of limiting the choices to those that appear currently technically feasible. We describe the top-level metrics of inner working angle, contrast and photometric throughput and explore how they are related to the range of target stars. A critical point is that for each telescope architecture and coronagraphic choice the telescope stability requirements have differing impacts on the design for open versus closed-loop sensing and control.

  13. The image slicer for the Subaru Telescope High Dispersion Spectrograph

    CERN Document Server

    Tajitsu, Akito; Yamamuro, Tomoyasu

    2012-01-01

    We report on the design, manufacturing, and performance of the image slicer for the High Dispersion Spectrograph (HDS) on the Subaru Telescope. This instrument is a Bowen-Walraven type image slicer providing five 0.3 arcsec x 1.5 arcsec images with a resolving power of R= 110,000. The resulting resolving power and line profiles are investigated in detail, including estimates of the defocusing effect on the resolving power. The throughput in the wavelength range from 400 to 700 nm is higher than 80%, thereby improving the efficiency of the spectrograph by a factor of 1.8 for 0.7 arcsec seeing.

  14. Lifetime Calculations on Collector Optics from Laser Plasma Extreme Ultraviolet Sources with Minimum Mass

    Institute of Scientific and Technical Information of China (English)

    WU Tao; WANG Xin-Bing

    2011-01-01

    An ion flux and its kinetic energy spectrum are obtained using a self similar spherically symmetric fluid model of expansion of a collisionless plasma into vacuum. According to the ion flux and energy distribution, the collector optical lifetime is estimated by knowledge of the sputtering yield of conventional Mo/Si multilayer coatings for the CO2 and Nd:YAG pulsed-laser produced plasmas based on the minimum mass tin droplet target without debris mitigation. The results show that the longer wavelength of the CO2 laser produced plasma light source is more suitable for extreme ultraviolet lithography than Nd:YAG laser in respect of fast ion debris induced sputtering damage to the collector mirror.%@@ An ion flux and its kinetic energy spectrum are obtained using a self similar spherically symmetric fluid model of expansion of a collisionless plasma into vacuum.According to the ion flux and energy distribution,the collector optical lifetime is estimated by knowledge of the sputtering yield of conventional Mo/Si multilayer coatings for the CO2 and Nd:YAG pulsed-laser produced plasmas based on the minimum mass tin droplet target without debris mitigation.The results show that the longer wavelength of the CO2 laser produced plasma light source is more suitable for extreme ultraviolet lithography than Nd:YAG laser in respect of fast ion debris induced sputtering damage to the collector mirror.

  15. Development of compact extreme ultraviolet interferometry for on-line test of lithography cameras

    Energy Technology Data Exchange (ETDEWEB)

    Ray-Chaudhuri, A.K.; Nissen, R.P.; Krenz, K.D.; Stulen, R.H. [Sandia National Labs., Livermore, CA (United States); Sweatt, W.C.; Warren, M.E.; Wendt, J.R.; Kravitz, S.H. [Sandia National Labs., Albuquerque, NM (United States); Bjorkholm, J.E. [AT and T Bell Labs., Holmdel, NJ (United States)

    1998-12-31

    Extreme ultraviolet lithography (EUVL) is a candidate technology for the microelectronics industry with design rules for 0.1 {micro}m features and beyond. When characterizing an extreme ultraviolet (EUV) lithographic optical system, visible light interferometry is limited to measuring wavefront aberration caused by surface figure error while failing to measure wavefront errors induced by the multilayer coatings. This fact has generated interest in developing interferometry at an EUV camera`s operational wavelength (at-wavelength testing), which is typically around 13 nm. While a laser plasma source (LPS) is being developed as a lithography production source, it has generally been considered that only an undulator located at a synchrotron facility can provide the necessary laser-like point source for EUV interferometry. Although an undulator-based approach has been successfully demonstrated, it would be advantageous to test a camera in its operational configuration. The authors are developing the latter approach by utilizing extended source size schemes to provide usable flux throughput. A slit or a grating mounted in front of the source can provide the necessary spatial coherence for Ronchi interferometry. The usable source size is limited only by the well-corrected field of view of the camera under test. The development of this interferometer will be presented.

  16. The intrinsic extreme ultraviolet fluxes of F5 V to M5 V stars

    Energy Technology Data Exchange (ETDEWEB)

    Linsky, Jeffrey L. [JILA, University of Colorado and NIST, 440UCB Boulder, CO 80309-0440 (United States); Fontenla, Juan [NorthWest Research Associates Inc., 3380 Mitchell Ln, Boulder, CO 80301 (United States); France, Kevin, E-mail: jlinsky@jilau1.colorado.edu, E-mail: jfontenla@nwra.com, E-mail: Kevin.France@colorado.edu [CASA, University of Colorado, 593UCB Boulder, CO 80309-0593 (United States)

    2014-01-01

    Extreme ultraviolet (EUV) radiations (10-117 nm) from host stars play important roles in the ionization, heating, and mass loss from exoplanet atmospheres. Together with the host star's Lyα and far-UV (117-170 nm) radiation, EUV radiation photodissociates important molecules, thereby changing the chemistry in exoplanet atmospheres. Since stellar EUV fluxes cannot now be measured and interstellar neutral hydrogen completely obscures stellar radiation between 40 and 91.2 nm, even for the nearest stars, we must estimate the unobservable EUV flux by indirect methods. New non-LTE semiempirical models of the solar chromosphere and corona and solar irradiance measurements show that the ratio of EUV flux in a variety of wavelength bands to the Lyα flux varies slowly with the Lyα flux and thus with the magnetic heating rate. This suggests and we confirm that solar EUV/Lyα flux ratios based on the models and observations are similar to the available 10-40 nm flux ratios observed with the Extreme Ultraviolet Explorer (EUVE) satellite and the 91.2-117 nm flux observed with the Far Ultraviolet Spectroscopic Explorer (FUSE) satellite for F5 V-M5 V stars. We provide formulae for predicting EUV flux ratios based on the EUVE and FUSE stellar data and on the solar models, which are essential input for modeling the atmospheres of exoplanets.

  17. Estimation of resist sensitivity for extreme ultraviolet lithography using an electron beam

    Directory of Open Access Journals (Sweden)

    Tomoko Gowa Oyama

    2016-08-01

    Full Text Available It is a challenge to obtain sufficient extreme ultraviolet (EUV exposure time for fundamental research on developing a new class of high sensitivity resists for extreme ultraviolet lithography (EUVL because there are few EUV exposure tools that are very expensive. In this paper, we introduce an easy method for predicting EUV resist sensitivity by using conventional electron beam (EB sources. If the chemical reactions induced by two ionizing sources (EB and EUV are the same, the required absorbed energies corresponding to each required exposure dose (sensitivity for the EB and EUV would be almost equivalent. Based on this theory, we calculated the resist sensitivities for the EUV/soft X-ray region. The estimated sensitivities were found to be comparable to the experimentally obtained sensitivities. It was concluded that EB is a very useful exposure tool that accelerates the development of new resists and sensitivity enhancement processes for 13.5 nm EUVL and 6.x nm beyond-EUVL (BEUVL.

  18. Emission Lines of Fe XI - XIII in the Extreme Ultraviolet Region

    Science.gov (United States)

    Lepson, Jaan; Beiersdorfer, Peter; Liedahl, Duane; Desai, Priya; Brickhouse, Nancy; Dupree, Andrea; Kahn, Steven

    2009-05-01

    Iron is one of the most abundant heavy elements in extreme ultraviolet spectra of astrophysical and laboratory plasmas, and its various ions radiate profusely in the extreme ultraviolet (EUV) wavelength band. Iron emission in the EUV provides important d iagnostic tools for such properties as plasma temperature and density, and perhaps even magnetic field strength. Despite its importance to astrophysics and magnetic fusion, knowledge of the EUV spectrum of iron is incomplete. Identification of iron emis sion lines is hampered by the paucity of accurate laboratory measurements and the uncertainty of even the best atomic models. As part of a project to measure and compile emission line data in the EUV, we present here spectra and lines of Fe XI - XIII recorded on the Livermore EBIT-II electron beam ion trap in the 50 - 120 åregion. We measured line positions to 0.02 åand relative intensities with an accuracy of one part in twenty. Many new lines are identified and added to the available databa ses. Part of this work was performed under the auspices of the U S Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344 and was supported by NASA's Astronomy and Physics Research and Analysis Program under Con t ract NNH07AF811.

  19. GAW (Gamma Air Watch) a novel imaging Cherenkov telescope

    CERN Document Server

    Cusumano, G; Biondo, B; Catalano, O; Giarrusso, S; Gugliotta, G; La Fata, L; Maccarone, M C; Mangano, A; Mineo, T; Russo, F; Sacco, B

    2001-01-01

    GAW (Gamma Air Watch) is a new imaging Cherenkov telescope designed for observation of very high-energy gamma-ray sources. GAW will be equipped with a 3 meter diameter Fresnel lens as light collector and with an array of 300 multi-anode photomultipliers at the focal plane. The pixel size will be 4 arcmin wide for a total field of view of 10.5 degrees. Whith respect to the planned imaging Cherenkov telescopes (CANGAROO III, HESS, MAGIC, VERITAS) GAW follows a different approach for what concerns both the optical system and the detection working mode: the Cherenkov light collector is a single acrylic flat Fresnel lens (instead of mirrors) that allows to achieve wide field of view; the photomultipliers operate in single photoelectron counting mode (instead of charge integration). The single photoelectron counting mode allows to reach a low energy threshold of ~200 GeV, in spite of the relatively small dimension of the GAW optic system.

  20. Pattern recognition trigger electronics for an imaging atmospheric Cherenkov telescope

    CERN Document Server

    Bradbury, S M

    2002-01-01

    For imaging atmospheric Cherenkov telescopes, which aim to detect electromagnetic air showers with cameras consisting of several hundred photomultiplier pixels, the single pixel trigger rate is dominated by fluctuations in night sky brightness and by ion feedback in the photomultipliers. Pattern recognition trigger electronics may be used to reject night sky background images, thus reducing the data rate to a manageable level. The trigger system described here detects patterns of 2, 3 or 4 adjacent pixel signals within a 331 pixel camera and gives a positive trigger decision in 65 ns. The candidate pixel pattern is compared with the contents of a pre-programmed memory. With the trigger decision timing controlled by a fixed delay the time-jitter inherent in the use of programmable gate arrays is avoided. This system is now in routine operation at the Whipple 10 m Telescope.

  1. Enhanced defect detection capability using learning system for extreme ultraviolet lithography mask inspection tool with projection electron microscope optics

    Science.gov (United States)

    Hirano, Ryoichi; Hatakeyama, Masahiro; Terao, Kenji; Watanabe, Hidehiro

    2016-04-01

    Extreme ultraviolet lithography (EUVL) patterned mask defect detection is a major issue that must be addressed to realize EUVL-based device fabrication. We have designed projection electron microscope (PEM) optics for integration into a mask inspection system, and the resulting PEM system performs well in half-pitch (hp) 16-nm-node EUVL patterned mask inspection applications. A learning system has been used in this PEM patterned mask inspection tool. The PEM identifies defects using the "defectivity" parameter that is derived from the acquired image characteristics. The learning system has been developed to reduce the labor and the costs associated with adjustment of the PEM's detection capabilities to cope with newly defined mask defects. The concepts behind this learning system and the parameter optimization flow are presented here. The learning system for the PEM is based on a library of registered defects. The learning system then optimizes the detection capability by reconciling previously registered defects with newly registered defects. Functional verification of the learning system is also described, and the system's detection capability is demonstrated by applying it to the inspection of hp 11-nm EUV masks. We can thus provide a user-friendly mask inspection system with reduced cost of ownership.

  2. Critical dimension uniformity and contact edge roughness in extreme ultraviolet lithography: effect of photoacid generator, sensitizer and quencher

    Science.gov (United States)

    Kuppuswamy, Vijaya-Kumar Murugesan; Constantoudis, Vassilios; Gogolides, Evangelos; Pret, Alessandro Vaglio; Gronheid, Roel

    2013-04-01

    One of the main challenges for developing extreme ultraviolet resists is to satisfy critical dimension uniformity (CDU) and sidewall roughness of contacts to the allowable limit. To this end, further understanding of the effects of resist ingredients on CDU and contact edge roughness (CER) is required. We investigate the effects of a photoacid generator (PAG), sensitizer and quencher concentrations on the CDU and CER. We find that the dependencies of CDU on sensitizer and quencher are dominated by photon shot noise (PSN) effects whereas a more complicated interplay between PSN and PAG distribution statistics should be considered in the dependence of CDU on PAG concentration. The estimated CER parameters [root mean square (RMS) value and correlation length ξ] exhibit a merging trend when plotted against the final critical dimension (CD). In addition, RMS value increases with exposure dose and PAG loading contrary to shot noise expectations. Power spectrum analysis reveals the dominant contribution of low-frequency undulations to CER, which is attributed to the enhanced interaction along specific directions between the aerial image and/or acid kinetics of nearby contacts. This inter-contact effect is further intensified with CD for fixed pitch and may explain the observed CER behavior.

  3. Hundred metre virtual telescope captures unique detailed colour image

    Science.gov (United States)

    2009-02-01

    A team of French astronomers has captured one of the sharpest colour images ever made. They observed the star T Leporis, which appears, on the sky, as small as a two-storey house on the Moon [1]. The image was taken with ESO's Very Large Telescope Interferometer (VLTI), emulating a virtual telescope about 100 metres across and reveals a spherical molecular shell around an aged star. ESO PR Photo 06a/09 The star T Leporis as seen with VLTI ESO PR Photo 06b/09 The star T Leporis to scale ESO PR Photo 06c/09 A virtual 100-metre telescope ESO PR Photo 06d/09 The orbit of Theta1 Orionis C ESO PR Video 06a/09 Zoom-in onto T Leporis "This is one of the first images made using near-infrared interferometry," says lead author Jean-Baptiste Le Bouquin. Interferometry is a technique that combines the light from several telescopes, resulting in a vision as sharp as that of a giant telescope with a diameter equal to the largest separation between the telescopes used. Achieving this requires the VLTI system components to be positioned to an accuracy of a fraction of a micrometre over about 100 metres and maintained so throughout the observations -- a formidable technical challenge. When doing interferometry, astronomers must often content themselves with fringes, the characteristic pattern of dark and bright lines produced when two beams of light combine, from which they can model the physical properties of the object studied. But, if an object is observed on several runs with different combinations and configurations of telescopes, it is possible to put these results together to reconstruct an image of the object. This is what has now been done with ESO's VLTI, using the 1.8-metre Auxiliary Telescopes. "We were able to construct an amazing image, and reveal the onion-like structure of the atmosphere of a giant star at a late stage of its life for the first time," says Antoine Mérand, member of the team. "Numerical models and indirect data have allowed us to imagine the

  4. Removing the Fringes from Space Telescope Imaging Spectrograph Slitless Spectra

    Science.gov (United States)

    Malumuth, Eliot M.; Hill, Robert S.; Gull, Ted; Woodgate, Bruce E.; Bowers, Charles W.; Kimble, Randy A.; Lindler, Don; Plait, Phil; Blouke, Morley

    2003-02-01

    Using what is known about the physical and chemical structure of the CCD detector on the Space Telescope Imaging Spectrograph (STIS) and over 50 calibration images taken with different wavelength mappings onto the detector, we have devised a model function that allows us to predict the fringing of any spectral image taken with the STIS CCD. This function is especially useful for spectra taken without a slit with the G750L grating. The STIS parallel observing program uses this ``slitless spectroscopy'' mode extensively. The arbitrary mapping of wavelength versus position that results from each source's chance position in the field renders direct calibration of the fringe amplitudes in this mode impossible. However, we find that correcting observed data using our semiempirical fringing model produces a substantial reduction in the fringe amplitudes. Tests using the flux calibration white dwarf standard G191-B2B show that we can reduce the fringe amplitude in the 9000-10000 Å region from about 20% peak to peak (10% rms) to about 4% peak to peak (2% rms) using the model, while a standard calibration using a ``fringe flat'' reduces the fringe amplitudes to 3.3% peak to peak (1.7% rms). The same technique is applicable to other astronomical CCDs. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. Funding of this activity was through the Space Telescope Imaging Spectrograph Guaranteed Time Observations.

  5. Analysis of line-and-space resist patterns with sub-20 nm half-pitch fabricated using high-numerical-aperture exposure tool of extreme ultraviolet lithography

    Science.gov (United States)

    Kozawa, Takahiro; Santillan, Julius Joseph; Itani, Toshiro

    2016-09-01

    The resolution of resist processes for extreme ultraviolet (EUV) lithography has been steadily improved and has reached the sub-20 nm half-pitch region. Currently, the resist materials capable of resolving 11 nm half-pitch line-and-space patterns are being developed in industrial fields. In this study, the line-and-space resist patterns with sub-20 nm half-pitches were fabricated using a high-numerical-aperture (NA) EUV exposure tool and analyzed by the Monte Carlo simulation. The scanning electron microscopy (SEM) images of resist patterns after their development were compared with the latent images calculated on the basis of the sensitization and reaction mechanisms of chemically amplified EUV resists. The approximate relationship between resist patterns and latent images was clarified for the sub-20 nm half-pitch region. For the realization of 11 nm half-pitch fabrication, the suppression of the stochastic effects in the development process is an important consideration.

  6. Astronomers Make First Images With Space Radio Telescope

    Science.gov (United States)

    1997-07-01

    Marking an important new milestone in radio astronomy history, scientists at the National Radio Astronomy Observatory (NRAO) in Socorro, New Mexico, have made the first images using a radio telescope antenna in space. The images, more than a million times more detailed than those produced by the human eye, used the new Japanese HALCA satellite, working in conjunction with the National Science Foundation's (NSF) Very Long Baseline Array (VLBA) and Very Large Array (VLA) ground-based radio telescopes. The landmark images are the result of a long-term NRAO effort supported by the National Aeronautics and Space Administration (NASA). "This success means that our ability to make detailed radio images of objects in the universe is no longer limited by the size of the Earth," said NRAO Director Paul Vanden Bout. "Astronomy's vision has just become much sharper." HALCA, launched on Feb. 11 by Japan's Institute of Space and Astronautical Science (ISAS), is the first satellite designed for radio astronomy imaging. It is part of an international collaboration led by ISAS and backed by NRAO; Japan's National Astronomical Observatory; NASA's Jet Propulsion Laboratory (JPL); the Canadian Space Agency; the Australia Telescope National Facility; the European VLBI Network and the Joint Institute for Very Long Baseline Interferometry in Europe. On May 22, HALCA observed a distant active galaxy called PKS 1519-273, while the VLBA and VLA also observed it. Data from the satellite was received by a tracking station at the NRAO facility in Green Bank, West Virginia. Tape-recorded data from the satellite and from the radio telescopes on the ground were sent to NRAO's Array Operations Center (AOC) in Socorro, NM. In Socorro, astronomers and computer scientists used a special-purpose computer to digitally combine the signals from the satellite and the ground telescopes to make them all work together as a single, giant radio telescope. This dedicated machine, the VLBA Correlator, built as

  7. Development of extreme ultraviolet and soft x-ray multilayer optics for scientific studies with femtosecond/attosecond sources

    Energy Technology Data Exchange (ETDEWEB)

    Aquila, Andrew Lee [Univ. of California, Berkeley, CA (United States)

    2009-05-21

    The development of multilayer optics for extreme ultraviolet (EUV) radiation has led to advancements in many areas of science and technology, including materials studies, EUV lithography, water window microscopy, plasma imaging, and orbiting solar physics imaging. Recent developments in femtosecond and attosecond EUV pulse generation from sources such as high harmonic generation lasers, combined with the elemental and chemical specificity provided by EUV radiation, are opening new opportunities to study fundamental dynamic processes in materials. Critical to these efforts is the design and fabrication of multilayer optics to transport, focus, shape and image these ultra-fast pulses This thesis describes the design, fabrication, characterization, and application of multilayer optics for EUV femtosecond and attosecond scientific studies. Multilayer mirrors for bandwidth control, pulse shaping and compression, tri-material multilayers, and multilayers for polarization control are described. Characterization of multilayer optics, including measurement of material optical constants, reflectivity of multilayer mirrors, and metrology of reflected phases of the multilayer, which is critical to maintaining pulse size and shape, were performed. Two applications of these multilayer mirrors are detailed in the thesis. In the first application, broad bandwidth multilayers were used to characterize and measure sub-100 attosecond pulses from a high harmonic generation source and was performed in collaboration with the Max-Planck institute for Quantum Optics and Ludwig- Maximilians University in Garching, Germany, with Professors Krausz and Kleineberg. In the second application, multilayer mirrors with polarization control are useful to study femtosecond spin dynamics in an ongoing collaboration with the T-REX group of Professor Parmigiani at Elettra in Trieste, Italy. As new ultrafast x-ray sources become available, for example free electron lasers, the multilayer designs

  8. Thin film and multilayer coating development for the extreme ultraviolet spectral region

    Energy Technology Data Exchange (ETDEWEB)

    Garoli, D. [INFM-LUXOR DEI University of Padova, via Gradenigo 6/B, 35131 Padova (Italy)]. E-mail: garoli@dei.unipd.it; Monaco, G. [INFM-LUXOR DEI University of Padova, via Gradenigo 6/B, 35131 Padova (Italy); Frassetto, F. [INFM-LUXOR DEI University of Padova, via Gradenigo 6/B, 35131 Padova (Italy); Pelizzo, M.G. [INFM-LUXOR DEI University of Padova, via Gradenigo 6/B, 35131 Padova (Italy); Nicolosi, P. [INFM-LUXOR DEI University of Padova, via Gradenigo 6/B, 35131 Padova (Italy); Armelao, L. [Dipartimento di Scienze Chimiche, University of Padova, Via Marzolo 1, 35131 Padova (Italy); Mattarello, V. [INFN-LNL, strada Romea 35020 Legnaro PD (Italy); Rigato, V. [INFN-LNL, strada Romea 35020 Legnaro PD (Italy)

    2006-11-15

    B{sub 4}C optical coating represents, together with Ir, Pt, SiC, one of best choice for high reflectance in the extreme ultraviolet region. This material is also used combined with others materials in multilayer such as Si/B{sub 4}C or as interlayer in Mo/Si multilayer to avoid interdiffusion. In this study we have performed optical, compositional and structural analyses for thin film of B{sub 4}C deposited by means of magnetron sputtering and on preliminary samples deposited by e-beam evaporation. Here we report reflectivity measurements and the derived optical constants of B{sub 4}C in the 400-1500 A region.

  9. Measurements and identifications of extreme ultraviolet spectra of highly-charged Sm and Er

    CERN Document Server

    Podpaly, Y A; Reader, J; Ralchenko, Yu

    2014-01-01

    We report spectroscopic measurements of highly charged samarium and erbium performed at the National Institute of Standards and Technology (NIST) Electron Beam Ion Trap (EBIT). These measurements are in the extreme ultraviolet (EUV) range, and span electron beam energies from 0.98 keV to 3.00 keV. We observed 71 lines from Kr-like Sm$^{26+}$ to Ni-like Sm$^{34+}$, connecting 83 energy levels, and 64 lines from Rb-like Er$^{32+}$ to Ni-like Er$^{40+}$, connecting 78 energy levels. Of these lines, 64 in Sm and 60 in Er are new. Line identifications are performed using collisional-radiative modeling of the EBIT plasma. All spectral lines are assigned individual uncertainties, most in the $\\sim$0.001 nm range. Energy levels are derived from the wavelength measurements.

  10. High-Resolution Spectroscopy of G191-B2B in the Extreme Ultraviolet

    CERN Document Server

    Cruddace, R G; Yentis, D J; Brown, C M; Gursky, H; Barstow, M A; Bannister, N P; Fraser, G W; Spragg, J E; Lapington, J S; Tandy, J A; Sanderson, B; Culhane, J L; Barbee, T W; Kordas, J F; Goldstein, W H; Fritz, G G

    2001-01-01

    We report a high-resolution (R=3000-4000) spectroscopic observation of the DA white dwarf G191-B2B in the extreme ultraviolet band 220-245 A. A low- density ionised He component is clearly present along the line-of-sight, which if completely interstellar implies a He ionisation fraction considerably higher than is typical of the local interstellar medium. However, some of this material may be associated with circumstellar gas, which has been detected by analysis of the C IV absorption line doublet in an HST STIS spectrum. A stellar atmosphere model assuming a uniform element distribution yields a best fit to the data which includes a significant abundance of photospheric He. The 99-percent confidence contour for the fit parameters excludes solutions in which photospheric He is absent, but this result needs to be tested using models allowing abundance gradients.

  11. Design of an extreme ultraviolet spectrometer suite to characterize rapidly heated solid matter

    Science.gov (United States)

    Ivancic, S. T.; Stillman, C. R.; Nelson, D.; Begishev, I. A.; Mileham, C.; Nilson, P. M.; Froula, D. H.

    2016-11-01

    An ultrafast streaked extreme-ultraviolet (XUV) spectrometer (5-20 nm) was developed to measure the temperature dynamics in rapidly heated samples. Rapid heating makes it possible to create exotic states of matter that can be probed during their inertial confinement time—tens of picoseconds in the case of micron-sized targets. In contrast to other forms of pyrometry, where the temperature is inferred from bulk x-ray emission, XUV emission is restricted to the sample surface, allowing for a temperature measurement at the material-vacuum interface. The surface-temperature measurement constrains models for the release of high-energy-density material. Coupling the XUV spectrometer to an ultrafast (<2-ps) streak camera provided picosecond-time scale evolution of the surface-layer emission. Two high-throughput XUV spectrometers were designed to simultaneously measure the time-resolved and absolute XUV emission.

  12. Fluorescence Efficiency and Visible Re-emission Spectrum of Tetraphenyl Butadiene Films at Extreme Ultraviolet Wavelengths

    CERN Document Server

    Gehman, V M; Rielage, K; Hime, A; Sun, Y; Mei, D -M; Maassen, J; Moore, D

    2011-01-01

    A large number of current and future experiments in neutrino and dark matter detection use the scintillation light from noble elements as a mechanism for measuring energy deposition. The scintillation light from these elements is produced in the extreme ultraviolet (EUV) range, from 60 - 200 nm. Currently, the most practical technique for observing light at these wavelengths is to surround the scintillation volume with a thin film of Tetraphenyl Butadiene (TPB) to act as a fluor. The TPB film absorbs EUV photons and reemits visible photons, detectable with a variety of commercial photosensors. Here we present a measurement of the re-emission spectrum of TPB films when illuminated with 128, 160, 175, and 250 nm light. We also measure the fluorescence efficiency as a function of incident wavelength from 120 to 250 nm.

  13. Deposition and sputtering yields on EUV collector mirror from Laser Plasma Extreme Ultraviolet Sources

    Energy Technology Data Exchange (ETDEWEB)

    Wu Tao [Wuhan National Laboratory for Optoelectronics, School of Optoelectronic Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Rao Zhiming [Depart of Computer Science, Jiangxi University of Traditional Chinese Medicine, Nanchang 330004, Jiangxi (China); Wang Shifang, E-mail: flatime@163.com [School of Physics and Electric Information, Hubei University of Education 1 Nanhuan Road, Wuhan East High-Tech. Zone, Wuhan 430205, Hubei (China)

    2011-02-01

    Based on the self-similar solution of gas dynamic equations, spherical expansion of the highly ionized plasma with limited mass into a vacuum is investigated for the droplet target laser-produced plasma extreme ultraviolet (LPP-EUV) sources. Using partially numerical and partially analytical technology, the velocity, the temperature and the density profiles in the plume versus ionization degree, adiabatic index and initial conditions are presented. Furthermore, the spatial thickness variations of the deposited substrate witness and ion sputtering yields for Ru, Mo, and Si under Sn ion bombardment are theoretically calculated, which can be useful to enable LPP-EUV sources suppliers to estimate collector lifetime and improve debris mitigation systems.

  14. Extreme ultraviolet (EUV) surface modification of polytetrafluoroethylene (PTFE) for control of biocompatibility

    Energy Technology Data Exchange (ETDEWEB)

    Ahad, Inam Ul, E-mail: inam-ul.ahad@wat.edu.pl [Institute of Optoelectronics, Military University of Technology, 00-908 Warsaw (Poland); Advanced Processing Technology Research Centre, School of Mechanical and Manufacturing Engineering, Faculty of Engineering & Computing, Dublin City University, Dublin 9 (Ireland); Butruk, Beata [Department of Biotechnology and Bioprocess Engineering, Warsaw University of Technology, Ul. Waryńskiego 1, 00-645 Warsaw (Poland); Ayele, Mesfin; Budner, Bogusław; Bartnik, Andrzej; Fiedorowicz, Henryk [Institute of Optoelectronics, Military University of Technology, 00-908 Warsaw (Poland); Ciach, Tomasz [Department of Biotechnology and Bioprocess Engineering, Warsaw University of Technology, Ul. Waryńskiego 1, 00-645 Warsaw (Poland); Brabazon, Dermot [Advanced Processing Technology Research Centre, School of Mechanical and Manufacturing Engineering, Faculty of Engineering & Computing, Dublin City University, Dublin 9 (Ireland)

    2015-12-01

    Extreme ultraviolet (EUV) surface modification of polytetrafluoroethylene (PTFE) was performed in order to enhance the degree of biocompatibility. Polymer samples were irradiated by different number of EUV shots using a laser–plasma based EUV source in the presence of nitrogen gas. The physical and chemical properties of EUV modified PTFE samples were studied using Atomic Force Microscopy, X-ray photoelectron spectroscopy and water contact angle (WCA) methods. Pronounced wall type micro and nano-structures appeared on the EUV treated polymer surfaces resulting in increased surface roughness and hydrophobicity. Stronger cell adhesion and good cell morphology were observed on EUV modified surfaces by in-vitro cell culture studies performed using L929 fibroblasts.

  15. Extreme ultraviolet spectroscopy and atomic models of highly charged heavy ions in the Large Helical Device

    Science.gov (United States)

    Suzuki, C.; Murakami, I.; Koike, F.; Tamura, N.; Sakaue, H. A.; Morita, S.; Goto, M.; Kato, D.; Ohashi, H.; Higashiguchi, T.; Sudo, S.; O'Sullivan, G.

    2017-01-01

    We report recent results of extreme ultraviolet (EUV) spectroscopy of highly charged heavy ions in plasmas produced in the Large Helical Device (LHD). The LHD is an ideal source of experimental databases of EUV spectra because of high brightness and low opacity, combined with the availability of pellet injection systems and reliable diagnostic tools. The measured heavy elements include tungsten, tin, lanthanides and bismuth, which are motivated by ITER as well as a variety of plasma applications such as EUV lithography and biological microscopy. The observed spectral features drastically change between quasicontinuum and discrete depending on the plasma temperature, which leads to some new experimental identifications of spectral lines. We have developed collisional-radiative models for some of these ions based on the measurements. The atomic number dependence of the spectral feature is also discussed.

  16. Ionization avalanching in clusters ignited by extreme-ultraviolet driven seed electrons

    CERN Document Server

    Schütte, Bernd; Mermillod-Blondin, Alexandre; Vrakking, Marc J J; Rouzée, Arnaud; Fennel, Thomas

    2016-01-01

    We study the ionization dynamics of Ar clusters exposed to ultrashort near-infrared (NIR) laser pulses for intensities well below the threshold at which tunnel ionization could ignite the nanoplasma formation. We find that the emission of highly charged ions up to Ar$^{8+}$ can be switched on with unit contrast by generating only a few seed electrons with an ultrashort extreme ultraviolet (XUV) pulse prior to the NIR field. Molecular dynamics simulations can explain the experimental observations and predict a generic scenario where efficient heating via inverse bremsstrahlung and NIR avalanching are followed by resonant collective nanoplasma heating. The temporally and spatially well-controlled injection of the XUV seed electrons opens new routes for controlling avalanching and heating phenomena in nanostructures and solids, with implications for both fundamental and applied laser-matter science.

  17. Method for plasma formation for extreme ultraviolet lithography-theta pinch

    Science.gov (United States)

    Hassanein, Ahmed; Konkashbaev, Isak; Rice, Bryan

    2007-02-20

    A device and method for generating extremely short-wave ultraviolet electromagnetic wave, utilizing a theta pinch plasma generator to produce electromagnetic radiation in the range of 10 to 20 nm. The device comprises an axially aligned open-ended pinch chamber defining a plasma zone adapted to contain a plasma generating gas within the plasma zone; a means for generating a magnetic field radially outward of the open-ended pinch chamber to produce a discharge plasma from the plasma generating gas, thereby producing a electromagnetic wave in the extreme ultraviolet range; a collecting means in optical communication with the pinch chamber to collect the electromagnetic radiation; and focusing means in optical communication with the collecting means to concentrate the electromagnetic radiation.

  18. Methods and apparatus for use with extreme ultraviolet light having contamination protection

    Energy Technology Data Exchange (ETDEWEB)

    Chilese, Francis C.; Torczynski, John R.; Garcia, Rudy; Klebanoff, Leonard E.; Delgado, Gildardo R.; Rader, Daniel J.; Geller, Anthony S.; Gallis, Michail A.

    2016-07-12

    An apparatus for use with extreme ultraviolet (EUV) light comprising A) a duct having a first end opening, a second end opening and an intermediate opening intermediate the first end opening the second end opening, B) an optical component disposed to receive EUV light from the second end opening or to send light through the second end opening, and C) a source of low pressure gas at a first pressure to flow through the duct, the gas having a high transmission of EUV light, fluidly coupled to the intermediate opening. In addition to or rather than gas flow the apparatus may have A) a low pressure gas with a heat control unit thermally coupled to at least one of the duct and the optical component and/or B) a voltage device to generate voltage between a first portion and a second portion of the duet with a grounded insulative portion therebetween.

  19. Extreme ultraviolet proximity lithography for fast, flexible and parallel fabrication of infrared antennas.

    Science.gov (United States)

    Kunkemöller, Georg; Mass, Tobias W W; Michel, Ann-Katrin U; Kim, Hyun-Su; Brose, Sascha; Danylyuk, Serhiy; Taubner, Thomas; Juschkin, Larissa

    2015-10-05

    We present a method for fabrication of large arrays of nano-antennas using extreme-ultraviolet (EUV) illumination. A discharge-produced plasma source generating EUV radiation around 10.88 nm wavelength is used for the illumination of a photoresist via a mask in a proximity printing setup. The method of metallic nanoantennas fabrication utilizes a bilayer photoresist and employs a lift-off process. The impact of Fresnel-diffraction of EUV light in the mask on a shape of the nanostructures has been investigated. It is shown how by the use of the same rectangular apertures in the transmission mask, antennas of various shapes can be fabricated. Using Fourier transform infrared spectroscopy, spectra of antennas reflectivity were measured and compared to FDTD simulations demonstrating good agreement.

  20. Table-Top Milliwatt-Class Extreme Ultraviolet High Harmonic Light Source

    CERN Document Server

    Klas, Robert; Tschernajew, Maxim; Hädrich, Steffen; Shamir, Yariv; Tünnermann, Andreas; Rothhardt, Jan; Limpert, Jens

    2016-01-01

    Extreme ultraviolet (XUV) lasers are essential for the investigation of fundamental physics. Especially high repetition rate, high photon flux sources are of major interest for reducing acquisition times and improving signal to noise ratios in a plethora of applications. Here, an XUV source based on cascaded frequency conversion is presented, which delivers due to the drastic better single atom response for short wavelength drivers, an average output power of (832 +- 204) {\\mu}W at 21.7 eV. This is the highest average power produced by any HHG source in this spectral range surpassing precious demonstrations by more than a factor of four. Furthermore, a narrow-band harmonic at 26.6 eV with a relative energy bandwidth of only {\\Delta}E/E= 1.8 x 10E-3 has been generated, which is of high interest for high precision spectroscopy experiments.

  1. Generation of isolated attosecond extreme ultraviolet pulses employing nanoplasmonic field enhancement: optimization of coupled ellipsoids

    Energy Technology Data Exchange (ETDEWEB)

    Stebbings, S L; Suessmann, F; Yang, Y-Y; Kling, M F [Max-Planck-Institut fuer Quantenoptik, Hans-Kopfermann-Strass e 1, 85748 Garching (Germany); Scrinzi, A [Ludwig-Maximilians-Universitaet Muenchen, Theresienstrasse 37, 80333 Muenchen (Germany); Durach, M; Rusina, A; Stockman, M I, E-mail: sarah.stebbings@mpq.mpg.de, E-mail: mstockman@gsu.edu, E-mail: matthias.kling@mpq.mpg.de [Department of Physics and Astronomy, Georgia State University, 29 Peachtree Center Avenue, Atlanta, GA 30303 (United States)

    2011-07-15

    The production of extreme ultraviolet (XUV) radiation via nanoplasmonic field-enhanced high-harmonic generation (HHG) in gold nanostructures at MHz repetition rates is investigated theoretically in this paper. Analytical and numerical calculations are employed and compared in order to determine the plasmonic fields in gold ellipsoidal nanoparticles. The comparison indicates that numerical calculations can accurately predict the field enhancement and plasmonic decay, but may encounter difficulties when attempting to predict the oscillatory behavior of the plasmonic field. Numerical calculations for coupled symmetric and asymmetric ellipsoids for different carrier-envelope phases (CEPs) of the driving laser field are combined with time-dependent Schroedinger equation simulations to predict the resulting HHG spectra. The studies reveal that the plasmonic field oscillations, which are controlled by the CEP of the driving laser field, play a more important role than the nanostructure configuration in finding the optimal conditions for the generation of isolated attosecond XUV pulses via nanoplasmonic field enhancement.

  2. Generation of isolated attosecond extreme ultraviolet pulses employing nanoplasmonic field enhancement: optimization of coupled ellipsoids

    Science.gov (United States)

    Stebbings, S. L.; Süßmann, F.; Yang, Y.-Y.; Scrinzi, A.; Durach, M.; Rusina, A.; Stockman, M. I.; Kling, M. F.

    2011-07-01

    The production of extreme ultraviolet (XUV) radiation via nanoplasmonic field-enhanced high-harmonic generation (HHG) in gold nanostructures at MHz repetition rates is investigated theoretically in this paper. Analytical and numerical calculations are employed and compared in order to determine the plasmonic fields in gold ellipsoidal nanoparticles. The comparison indicates that numerical calculations can accurately predict the field enhancement and plasmonic decay, but may encounter difficulties when attempting to predict the oscillatory behavior of the plasmonic field. Numerical calculations for coupled symmetric and asymmetric ellipsoids for different carrier-envelope phases (CEPs) of the driving laser field are combined with time-dependent Schrödinger equation simulations to predict the resulting HHG spectra. The studies reveal that the plasmonic field oscillations, which are controlled by the CEP of the driving laser field, play a more important role than the nanostructure configuration in finding the optimal conditions for the generation of isolated attosecond XUV pulses via nanoplasmonic field enhancement.

  3. Modeling and measuring the transport and scattering of energetic debris in an extreme ultraviolet plasma source

    Science.gov (United States)

    Sporre, John R.; Elg, Daniel T.; Kalathiparambil, Kishor K.; Ruzic, David N.

    2016-01-01

    A theoretical model for describing the propagation and scattering of energetic species in an extreme ultraviolet (EUV) light lithography source is presented. An EUV light emitting XTREME XTS 13-35 Z-pinch plasma source is modeled with a focus on the effect of chamber pressure and buffer gas mass on energetic ion and neutral debris transport. The interactions of the energetic debris species, which is generated by the EUV light emitting plasma, with the buffer gas and chamber walls are considered as scattering events in the model, and the trajectories of the individual atomic species involved are traced using a Monte Carlo algorithm. This study aims to establish the means by which debris is transported to the intermediate focus with the intent to verify the various mitigation techniques currently employed to increase EUV lithography efficiency. The modeling is compared with an experimental investigation.

  4. Correlated proton-electron hole dynamics in protonated water clusters upon extreme ultraviolet photoionization

    Directory of Open Access Journals (Sweden)

    Zheng Li

    2016-07-01

    Full Text Available The ultrafast nuclear and electronic dynamics of protonated water clusters H+(H2On after extreme ultraviolet photoionization is investigated. In particular, we focus on cluster cations with n = 3, 6, and 21. Upon ionization, two positive charges are present in the cluster related to the excess proton and the missing electron, respectively. A correlation is found between the cluster's geometrical conformation and initial electronic energy with the size of the final fragments produced. For situations in which the electron hole and proton are initially spatially close, the two entities become correlated and separate in a time-scale of 20 to 40 fs driven by strong non-adiabatic effects.

  5. Extreme ultraviolet emission from dense plasmas generated with sub-10-fs laser pulses

    CERN Document Server

    Osterholz, J; Cerchez, M; Fischer, T; Hemmers, D; Hidding, B; Pipahl, A; Pretzler, G; Rose, S J; Willi, O

    2008-01-01

    The extreme ultraviolet (XUV) emission from dense plasmas generated with sub-10-fs laser pulses with varying peak intensities up to 3*10^16 W/cm^2 is investigated for different target materials. K shell spectra are obtained from low Z targets (carbon and boron nitride). In the spectra a series limit for the hydrogen and helium like resonance lines is observed indicating that the plasma is at high density and pressure ionization has removed the higher levels. In addition, L shell spectra from titanium targets were obtained. Basic features of the K and L shell spectra are reproduced with computer simulations. The calculations include hydrodynamic simulation of the plasma expansion and collisional radiative calculations of the XUV emission.

  6. Invisible marking system by extreme ultraviolet radiation: the new frontier for anti-counterfeiting tags

    Science.gov (United States)

    Di Lazzaro, P.; Bollanti, S.; Flora, F.; Mezi, L.; Murra, D.; Torre, A.; Bonfigli, F.; Montereali, R. M.; Vincenti, M. A.

    2016-07-01

    We present a marking technology which uses extreme ultraviolet radiation to write invisible patterns on tags based on alkali fluoride thin films. The shape of the pattern is pre-determined by a mask (in the case of contact lithography) or by a suitable mirror (projection lithography). Tags marked using this method offer a much better protection against fakes than currently available anti-counterfeiting techniques. The complexity and cost of this technology can be tailored to the value of the good to be protected, leaving, on the other hand, the specific reading technique straightforward. So far, we have exploited our invisible marking to tag artworks, identity cards, electrical components, and containers of radioactive wastes. Advantages and limits of this technology are discussed in comparison with the anti-counterfeiting systems available in the market.

  7. Radiation length imaging with high-resolution telescopes

    Science.gov (United States)

    Stolzenberg, U.; Frey, A.; Schwenker, B.; Wieduwilt, P.; Marinas, C.; Lütticke, F.

    2017-02-01

    The construction of low mass vertex detectors with a high level of system integration is of great interest for next generation collider experiments. Radiation length images with a sufficient spatial resolution can be used to measure and disentangle complex radiation length X/X0 profiles and contribute to the understanding of vertex detector systems. Test beam experiments with multi GeV particle beams and high-resolution tracking telescopes provide an opportunity to obtain precise 2D images of the radiation length of thin planar objects. At the heart of the X/X0 imaging is a spatially resolved measurement of the scattering angles of particles traversing the object under study. The main challenges are the alignment of the reference telescope and the calibration of its angular resolution. In order to demonstrate the capabilities of X/X0 imaging, a test beam experiment has been conducted. The devices under test were two mechanical prototype modules of the Belle II vertex detector. A data sample of 100 million tracks at 4 GeV has been collected, which is sufficient to resolve complex material profiles on the 30 μm scale.

  8. Telescope polarization and image quality: Lyot coronagraph performance

    Science.gov (United States)

    Breckinridge, J. B.; Chipman, R. A.

    2016-07-01

    In this paper we apply a vector representation of physical optics, sometimes called polarization aberration theory to study image formation in astronomical telescopes and instruments. We describe image formation in-terms of interferometry and use the Fresnel polarization equations to show how light, upon propagation through an optical system become partially polarized. We make the observation that orthogonally polarized light does not interfere to form an intensity image. We show how the two polarization aberrations (diattenuation and and retardance) distort the system PSF, decrease transmittance, and increase unwanted background above that predicted using the nonphysical scalar models. We apply the polarization aberration theory (PolAbT) described earlier (Breckinridge, Lam and Chipman, 2015, PASP 127, 445-468) to the fore-optics of the system designed for AFTA-WFIRST- CGI to obtain a performance estimate. Analysis of the open-literature design using PolAbT leads us to estimate that the WFIRST-CGI contrast will be in the 10-5 regime at the occulting mask. Much above the levels predicted by others (Krist, Nemati and Mennesson, 2016, JATIS 2, 011003). Remind the reader: 1. Polarizers are operators, not filters in the same sense as colored filters, 2. Adaptive optics does not correct polarization aberrations, 3. Calculations of both diattenuation and retardance are needed to model real-world telescope/coronagraph systems.

  9. Fast Imaging Solar Spectrograph System in New Solar Telescope

    Science.gov (United States)

    Park, Y.-D.; Kim, Y. H.; Chae, J.; Goode, P. R.; Cho, K. S.; Park, H. M.; Nah, J. K.; Jang, B. H.

    2010-12-01

    In 2004, Big Bear Solar Observatory in California, USA launched a project for construction of the world's largest aperture solar telescope (D = 1.6m) called New Solar Telescope(NST). University of Hawaii (UH) and Korea Astronomy and Space Science Institute(KASI) partly collaborate on the project. NST is a designed off-axis parabolic Gregorian reflector with very high spatial resolution(0.07 arcsec at 5000A) and is equipped with several scientific instruments such as Visible Imaging Magnetograph (VIM), InfraRed Imaging Magnetograph IRIM), and so on. Since these scientific instruments are focused on studies of the solar photosphere, we need a post-focus instrument for the NST to study the fine structures and dynamic patterns of the solar chromosphere and low Transition Region (TR) layer, including filaments/prominences, spicules, jets, micro flares, etc. For this reason, we developed and installed a fast imaging solar spectrograph(FISS) system on the NST withadvantages of achieving compact design with high spectral resolution and small aberration as well as recording many solar spectral lines in a single and/or dual band mode. FISS was installed in May, 2010 and now we carry out a test observation. In this talk, we introduce the FISS system and the results of the test observation after FISS installation.

  10. The Brazilian Tunable Filter Imager for the SOAR telescope

    CERN Document Server

    de Oliveira, Cláudia Mendes; Quint, Bruno; Andrade, Denis; Ferrari, Fabricio; Laporte, Rene; Ramos, Giseli de A; Guzman, Christian Dani; Cavalcanti, Luiz; de Calasans, Alvaro; Fernandez, Javier Ramirez; Castañeda, Edna Carolina Gutierrez; Jones, Damien; Fontes, Fernando Luis; Molina, Ana Maria; Fialho, Fábio; Plana, Henri; Jablonski, Francisco J; Reitano, Luiz; Daigle, Olivier; Scarano, Sergio; Amram, Philippe; Balard, Philippe; Gach, Jean-Luc; Carignan, Claude

    2013-01-01

    This paper presents a new Tunable Filter Instrument for the SOAR telescope. The Brazilian Tunable Filter Imager (BTFI) is a versatile, new technology, tunable optical imager to be used in seeing-limited mode and at higher spatial fidelity using the SAM Ground-Layer Adaptive Optics facility at the SOAR telescope. The instrument opens important new science capabilities for the SOAR community, from studies of the centers of nearby galaxies and the insterstellar medium to statistical cosmological investigations. The BTFI takes advantage of three new technologies. The imaging Bragg Tunable Filter concept utilizes Volume Phase Holographic Gratings in a double-pass configuration, as a tunable filter, while a new Fabry-Perot (FP) concept involves technologies which allow a single FP etalon to act over a large range of interference orders and spectral resolutions. Both technologies will be in the same instrument. Spectral resolutions spanning the range between 25 and 30,000 can be achieved through the use of iBTF at l...

  11. A new analysis method for very high definition Imaging Atmospheric Cherenkov Telescopes as applied to the CAT telescope

    CERN Document Server

    Le Bohec, S; Punch, M; Barrau, A; Bazer-Bachi, R; Cabot, H; Chounet, L M; Debiais, G; Dezalay, J P; Djannati-Ataï, A; Dumora, D; Espigat, P; Fabre, B; Fleury, P; Fontaine, G; George, R; Ghesquière, C; Goret, P; Gouiffes, C; Grenier, I A; Iacoucci, L; Malet, I; Meynadier, C; Munz, F; Palfrey, T A; Paré, E; Pons, Y; Québert, J; Ragan, K; Renault, C; Rivoal, M; Rob, L; Schovanek, P; Smith, D; Tavernet, J P; Vrana, J

    1998-01-01

    A new method of shower-image analysis is presented which appears very powerful as applied to those Cherenkov Imaging Telescopes with very high definition imaging capability. It provides hadron rejection on the basis of a single cut on the image shape, and simultaneously determines the energy of the electromagnetic shower and the position of the shower axis with respect to the detector. The source location is also reconstructed for each individual gamma-ray shower, even with one single telescope, so for a point source the hadron rejection can be further improved. As an example, this new method is applied to data from the CAT (Cherenkov Array at Themis) imaging telescope, which has been operational since Autumn, 1996.

  12. Characterization of carbon contamination under ion and hot atom bombardment in a tin-plasma extreme ultraviolet light source

    NARCIS (Netherlands)

    Dolgov, A.; Lopaev, D.; Lee, C. J.; Zoethout, E.; Medvedev, V.; Yakushev, O.; F. Bijkerk,

    2015-01-01

    Molecular contamination of a grazing incidence collector for extreme ultraviolet (EUV) lithography was experimentally studied. A carbon film was found to have grown under irradiation from a pulsed tin plasma discharge. Our studies show that the film is chemically inert and has characteristics that a

  13. Soft X-ray and extreme ultraviolet photon-counting imaging detector with curved surface micro-channel plate and induced charge position-sensitive anode%使用曲面微通道板和感应电荷位置灵敏阳极的软 X 射线-极紫外光子计数成像探测器研究

    Institute of Scientific and Technical Information of China (English)

    尼启良

    2015-01-01

    本项目对我国空间探测的极紫外( EUV)波段大视场相机所需求的球面光子计数成像探测器的关键技术进行了研究。首先,建立了光阴极材料次级电子产出模型,利用该模型计算了软X射线-EUV波段常用的光电阴极材料—碱卤化物的次级电子产出,分析了微通道板( MCP)的次级电子产出。建立了测量MCP量子探测效率的装置,并推导出MCP量子探测效率的计算公式,测量了MCP在软X射线-EUV波段的量子效率以及MCP量子效率随掠入射角的变化。其次,建立了球面实芯微通道板的制备装置,利用高温热成型方法制备出曲率半径为150 mm球面MCP,利用光刻技术制备出有效直径为48 mm的楔条形感应电荷位置灵敏阳极,在此基础上集成了一套使用球面MCP和感应电荷位置灵敏阳极的两维光子计数成像探测器。再次,研制出包括快速前端模拟电路与后续数字电路的成像读出电路,编制了能矫正图像畸变的图像实时采集和处理软件。最后,建立了MCP探测器空间分辨率、图像线性的检测装置,对研制出的探测器性能进行了检测,检测结果表明:探测器的各项技术指标完全满足要求。%The research on key techniques of wide field extreme ultraviolet ( EUV ) spherical micro-channel plate( MCP) photon-counting imaging detector which will be used in space probe in China have been done. Firstly, the secondary electron yield model of photocathode material was built, and the secondary yield of alka-li halide and MCP in soft X-ray and EUV band were calculated using the model.The measurement equipment of MCP′s quantum detection efficiency also was set up.The calculated fomula of MCP′s quantum efficiency was introduced, and MCP′s quantum efficiency vs.wavelength and incidence angle in soft X-ray and EUV re-gion were measured.secondly, the instrument of solid core spherical MCP fabrication was

  14. Measurement of Cosmic Shear with the Space Telescope Imaging Spectrograph

    Science.gov (United States)

    Rhodes, Jason; Refregier, Alexandre; Collins, Nicholas R.; Gardner, Jonathan P.; Groth, Edward J.; Hill, Robert S.

    2004-04-01

    Weak lensing by large-scale structure allows a direct measure of the dark matter distribution. We have used parallel images taken with the Space Telescope Imaging Spectrograph (STIS) on the Hubble Space Telescope to measure weak lensing, or cosmic shear. We measure the shapes of 26,036 galaxies in 1292 STIS fields and measure the shear variance at a scale of 0.51m. The charge transfer efficiency (CTE) of STIS has degraded over time and introduces a spurious ellipticity into galaxy shapes during the readout process. We correct for this effect as a function of signal-to-noise ratio and CCD position. We further show that the detected cosmic shear signal is nearly constant in time over the approximately 4 yr of observation. We detect cosmic shear at the 5.1 σ level, and our measurement of the shear variance is consistent with theoretical predictions in a ΛCDM universe. This provides a measure of the normalization of the mass power spectrum σ8=(1.02+/-0.16)(0.3/Ωm)0.46(0.21/Γ)0.18. The 1 σ error includes noise, cosmic variance, systematics, and the redshift uncertainty of the source galaxies. This is consistent with previous cosmic shear measurements, but tends to favor those with a high value of σ8. It is also consistent with the recent determination of σ8 from the Wilkinson Microwave Anisotropy Probe (WMAP) experiment.

  15. Deposition and characterization of B4C/CeO2 multilayers at 6.x nm extreme ultraviolet wavelengths

    Science.gov (United States)

    Sertsu, M. G.; Giglia, A.; Brose, S.; Park, D.; Wang, Z. S.; Mayer, J.; Juschkin, L.; Nicolosi, P.

    2016-03-01

    New multilayers of boron carbide/cerium dioxide (B4C/CeO2) combination on silicon (Si) substrate are manufactured to represent reflective-optics candidates for future lithography at 6.x nm wavelength. This is one of only a few attempts to make multilayers of this kind. Combination of several innovative experiments enables detailed study of optical properties, structural properties, and interface profiles of the multilayers in order to open up a room for further optimization of the manufacturing process. The interface profile is visualized by high-angle annular dark-field imaging which provides highly sensitive contrast to atomic number. Synchrotron based at-wavelength extreme ultraviolet (EUV) reflectance measurements near the boron (B) absorption edge allow derivation of optical parameters with high sensitivity to local atom interactions. X-ray reflectivity measurements at Cu-Kalpha (8 keV ) determine the period of multilayers with high in-depth resolution. By combining these measurements and choosing robust nonlinear curve fitting algorithms, accuracy of the results has been significantly improved. It also enables a comprehensive characterization of multilayers. Interface diffusion is determined to be a major cause for the low reflectivity performance. Optical constants of B4C and CeO2 layers are derived in EUV wavelengths. Besides, optical properties and asymmetric thicknesses of inter-diffusion layers (interlayers) in EUV wavelengths near the boron edge are determined. Finally, ideal reflectivity of the B4C/CeO2 combination is calculated by using optical constants derived from the proposed measurements in order to evaluate the potentiality of the design.

  16. Soft X-ray and extreme ultraviolet optics in CIOMP%长春光机所软X射线-极紫外波段光学研究

    Institute of Scientific and Technical Information of China (English)

    陈波; 尼启良; 王君林

    2007-01-01

    综述了我所软X射线-极紫外波段关键技术的研究进展.描述了软X射线-极紫外波段光源技术,研制了工作波段为6~22 nm的微流靶激光等离子体光源;介绍了光子计数成像探测器技术,研制出了有效直径为25 mm,等效像元分辨率为0.3 mm的极紫外波段探测器;开展了超光滑表面加工、检测技术的研究,研制了超光滑表面抛光机,加工出高面形精度的超光滑表面,面形精度为6 nm(RMS值),表面粗糙度达0.6 nm(RMS值);进行了软X射线-极紫外波段多层膜技术的研究,研制出13 nm处反射率为60%的多层膜反射镜,150 mm 口径反射镜的反射率均匀性优于±2.5%;最后,讨论了软X射线-极紫外波段测量技术研究,研制出该波段反射率计,其测量范围为5~50 nm,光谱分辨率好于0.2 nm,测量重复性好于士1%.在上述关键技术研究基础上,研制出了极紫外波段成像仪和空间极紫外波段太阳望远镜,这些仪器在我国空间科学研究项目中发挥了作用.%Some key technologies on soft X-ray and Extreme Ultraviolet(EUV)optics developed at CIOMP are reviewed in this paper.The technology for laser-produced plasma sources is described and a laser-produced plasma source with a liquid target worked at wavelength range of 6~22 nm has been developed.Soft X-ray and EUV photon-counting imaging is introduced and a two-dimensional photoncounting detector with position sensitive anode is fabricated.The active area of the detector is 25 mm in diameter and the resolution is 0.3 mm.The technology of super-smooth mirror fabrication is studied and a polishing machine has been developed to fabricate the super-smooth surface mirrors with the roughness and the figure of 0.6 nm(RMS)and 6 nm(RMS),respectively.Soft X-ray and EUV multilayer film technologies are coverd also in the paper and a number of mutilayer coating mirrors have been deposited for some space science projects.These multilayer mirrors show their

  17. First spectral observations of the diffuse background with the Extreme Ultraviolet Explorer

    Science.gov (United States)

    Jelinksy, P.; Vallerga, J. V.; Edelstein, J.

    1995-01-01

    We present the first results from the analysis of the spectroscopic observations of diffuse extreme ultraviolet (EUV) emission taken with the Extreme Ultraviolet Explorer (EUVE) spectrometers in the wavelength range 160-740 A. Although not designed or optimized for diffuse observation, the EUVE spectrometers are the most sensitive diffuse EUV spectrometer in orbit. The spectral resolution for diffuse emission of the medium and long-wavelength spectrometers are 17 and 34 A FWHM, respectively. During the period from 1992 July 25 to 1992 August 19, the spectrometers surveyed a 2 x 20 deg field scanned from (l, b) = (24 deg, -28 deg) to (44 deg, -74 deg) with a total effective exposure time of 575,232 s. The only emission lines detected were those of He I and He II (584, 537, 304 A) with intensities consistent with local geocoronal and/or interplanetary scattering of solar radiation (584 A = 1.30 rayleighs; 537 A = 0.040 R; and 304 A = 0.029 R). Models of the soft X-ray background, which results from a 10(exp 6) K plasma (Local Bubble) surrounding the neutral gas near the Sun (Local Cloud), predict that most of the flux from the hot plasma appears as emission lines in the EUV. We have compared these spectral predictions with our observations to place limits on the emission measure versus temperature of the proposed hot plasma. Using the same plasma model, we derived emissions measures for our data and the C and B soft X-ray bands of the Wisconsin rocket survey. We find that our limits for the plasma emission measure are a factor of 5-10 below the C- and B-band emission measures over the temperature range from 10(exp 5.7) to 10(exp 6.4) K. We explore possible scenarios that could reconcile our results with the X-ray surveys and conclude that depletion or a nonequilibrium plasma state rather than absorption are the more likely explanations of the discrepancy. We also show that our spectrum is inconsistent with the spectrum from the approximately 10(exp 5) K gas at the

  18. Satellite Imaging with Adaptive Optics on a 1 M Telescope

    Science.gov (United States)

    Bennet, F.; Price, I.; Rigaut, F.; Copeland, M.

    2016-09-01

    The Research School of Astronomy and Astrophysics at the Mount Stromlo Observatory in Canberra, Australia, have been developing adaptive optic (AO) systems for space situational awareness applications. We report on the development and demonstration of an AO system for satellite imaging using a 1 m telescope. The system uses the orbiting object as a natural guide star to measure atmospheric turbulence, and a deformable mirror to provide an optical correction. The AO system utilised modern, high speed and low noise EMCCD technology on both the wavefront sensor and imaging camera to achieve high performance, achieving a Strehl ratio in excess of 30% at 870 nm. Images are post processed with lucky imaging algorithms to further improve the final image quality. We demonstrate the AO system on stellar targets and Iridium satellites, achieving a near diffraction limited full width at half maximum. A specialised realtime controller allows our system to achieve a bandwidth above 100 Hz, with the wavefront sensor and control loop running at 2 kHz. The AO systems we are developing show how ground-based optical sensors can be used to manage the space environment. AO imaging systems can be used for satellite surveillance, while laser ranging can be used to determine precise orbital data used in the critical conjunction analysis required to maintain a safe space environment. We have focused on making this system compact, expandable, and versatile. We are continuing to develop this platform for other space situational awareness applications such as geosynchronous satellite astrometry, space debris characterisation, satellite imaging, and ground-to-space laser communication.

  19. A Topological Trigger System for Imaging Atmospheric-Cherenkov Telescopes

    CERN Document Server

    Schroedter, M; Byrum, K; Drake, G; Duke, C; Holder, J; Imran, A; Madhavan, A; Krennrich, F; Kreps, A; Smith, A

    2009-01-01

    A fast trigger system is being designed as a potential upgrade to VERITAS, or as the basis for a future array of imaging atmospheric-Cherenkov telescopes such as AGIS. The scientific goal is a reduction of the energy threshold by a factor of 2 over the current threshold of VERITAS of around 130 GeV. The trigger is being designed to suppress both accidentals from the night-sky background and cosmic rays. The trigger uses field-programmable gate arrays (FPGAs) so that it is adaptable to different observing modes and special physics triggers, e.g. pulsars. The trigger consists of three levels: The level 1 (L1.5) trigger operating on each telescope camera samples the discriminated pixels at a rate of 400 MHz and searches for nearest-neighbor coincidences. In L1.5, the received discriminated signals are delay-compensated with an accuracy of 0.078 ns, facilitating a short coincidence time-window between any nearest neighbor of 5 ns. The hit pixels are then sent to a second trigger level (L2) that parameterizes the ...

  20. Imaging Simulations for DESTINY, the Dark Energy Space Telescope

    Science.gov (United States)

    Lauer, T. R.; DESTINY Science Team

    2004-12-01

    We describe a mission concept for a 1.8-meter near-infrared (NIR) grism-mode space telescope optimized to return richly sampled Hubble diagrams of Type Ia and Type II supernovae (SNe) over the redshift range 0.5 the Universe as a function of time, and characterizing the nature of dark energy. The central concept for our proposed Dark Energy Space Telescope (DESTINY) is an all-grism NIR survey camera. SNe will be discovered by repeated imaging of an area located at the north ecliptic pole. Grism spectra with resolving power l/Dl = R * 100 will provide broad-band spectrophotometry, redshifts, SNe classification, as well as valuable time-resolved diagnostic data for understanding the SN explosion physics. Our approach features only a single mode of operation, a single detector technology, and a single instrument. Although grism spectroscopy is slow compared to SN detection in any single broad-band filter for photometry, or to conventional slit spectra for spectral diagnostics, the multiplex advantage of observing a large field-of-view over a full octave in wavelength simultaneously makes this approach highly competitive. In this poster we present exposure simulations to demonstrate the efficiency of the DESTINY approach.

  1. Upgraded cameras for the HESS imaging atmospheric Cherenkov telescopes

    Science.gov (United States)

    Giavitto, Gianluca; Ashton, Terry; Balzer, Arnim; Berge, David; Brun, Francois; Chaminade, Thomas; Delagnes, Eric; Fontaine, Gérard; Füßling, Matthias; Giebels, Berrie; Glicenstein, Jean-François; Gräber, Tobias; Hinton, James; Jahnke, Albert; Klepser, Stefan; Kossatz, Marko; Kretzschmann, Axel; Lefranc, Valentin; Leich, Holger; Lüdecke, Hartmut; Lypova, Iryna; Manigot, Pascal; Marandon, Vincent; Moulin, Emmanuel; de Naurois, Mathieu; Nayman, Patrick; Penno, Marek; Ross, Duncan; Salek, David; Schade, Markus; Schwab, Thomas; Simoni, Rachel; Stegmann, Christian; Steppa, Constantin; Thornhill, Julian; Toussnel, François

    2016-08-01

    The High Energy Stereoscopic System (H.E.S.S.) is an array of five imaging atmospheric Cherenkov telescopes, sensitive to cosmic gamma rays of energies between 30 GeV and several tens of TeV. Four of them started operations in 2003 and their photomultiplier tube (PMT) cameras are currently undergoing a major upgrade, with the goals of improving the overall performance of the array and reducing the failure rate of the ageing systems. With the exception of the 960 PMTs, all components inside the camera have been replaced: these include the readout and trigger electronics, the power, ventilation and pneumatic systems and the control and data acquisition software. New designs and technical solutions have been introduced: the readout makes use of the NECTAr analog memory chip, which samples and stores the PMT signals and was developed for the Cherenkov Telescope Array (CTA). The control of all hardware subsystems is carried out by an FPGA coupled to an embedded ARM computer, a modular design which has proven to be very fast and reliable. The new camera software is based on modern C++ libraries such as Apache Thrift, ØMQ and Protocol buffers, offering very good performance, robustness, flexibility and ease of development. The first camera was upgraded in 2015, the other three cameras are foreseen to follow in fall 2016. We describe the design, the performance, the results of the tests and the lessons learned from the first upgraded H.E.S.S. camera.

  2. Extreme-ultraviolet collector mirror measurement using large reflectometer at NewSUBARU synchrotron facility

    Science.gov (United States)

    Iguchi, Haruki; Hashimoto, Hiraku; Kuki, Masaki; Harada, Tetsuo; Kinoshita, Hiroo; Watanabe, Takeo; Platonov, Yuriy Y.; Kriese, Michael D.; Rodriguez, Jim R.

    2016-06-01

    In extreme-ultraviolet (EUV) lithography, the development of high-power EUV sources is one of the critical issues. The EUV output power directly depends on the collector mirror performance. Furthermore, mirrors with large diameters are necessary to achieve high collecting performance and take sufficient distance to prevent heat and debris from a radiation point of the source. Thus collector mirror development with accurate reflectometer is important. We have developed a large reflectometer at BL-10 beamline of the NewSUBARU synchrotron facility that can be used for mirrors with diameters, thicknesses, and weights of up to 800 mm, 250 mm, and 50 kg, respectively. This reflectometer can measure reflectivity with fully s-polarized EUV light. In this study, we measured the reflectance of a 412-mm-diameter EUV collector mirror using a maximum incident angle of 36°. We obtained the peak reflectance, center wavelength and reflection bandwidth results and compared our results with Physikalisch-Technische Bundesanstalt results.

  3. Generation of an extreme ultraviolet supercontinuum with a multicycle chirped laser and a static electric field

    Institute of Scientific and Technical Information of China (English)

    Zhang Gang-Tai; Bai Ting-Ting; Zhang Mei-Guang

    2012-01-01

    We theoretically present a method for generating an ultrabroad extreme ultraviolet (XUV) supercontinuum by using the combination of a multicycle chirped laser and a static electric field.At a low laser intensity,the spectral cutoff is extended to the 495th order harmonic,and the bandwidth of the supercontinuum spectrum is broadened to 535 eV.At a high laser intensity,the harmonic cutoff is enlarged to the 667th order,and a supercontinuum covering a bandwidth of 1035 eV is generated.In these two cases,the long quantum path is removed,and the short quantum path is selected.Especially for the relatively high laser intensity,an isolated 23-attosecond pulse with a bandwidth of about 170.6 eV is directly obtained.Finally,we also analyze the influences of the chirp parameter and the duration of the chirped pulse as well as the static field strength on the supercontinuum.

  4. Chirped pulse amplification in an extreme-ultraviolet free-electron laser

    Science.gov (United States)

    Gauthier, David; Allaria, Enrico; Coreno, Marcello; Cudin, Ivan; Dacasa, Hugo; Danailov, Miltcho Boyanov; Demidovich, Alexander; di Mitri, Simone; Diviacco, Bruno; Ferrari, Eugenio; Finetti, Paola; Frassetto, Fabio; Garzella, David; Künzel, Swen; Leroux, Vincent; Mahieu, Benoît; Mahne, Nicola; Meyer, Michael; Mazza, Tommaso; Miotti, Paolo; Penco, Giuseppe; Raimondi, Lorenzo; Ribič, Primož Rebernik; Richter, Robert; Roussel, Eléonore; Schulz, Sebastian; Sturari, Luca; Svetina, Cristian; Trovò, Mauro; Walker, Paul Andreas; Zangrando, Marco; Callegari, Carlo; Fajardo, Marta; Poletto, Luca; Zeitoun, Philippe; Giannessi, Luca; de Ninno, Giovanni

    2016-12-01

    Chirped pulse amplification in optical lasers is a revolutionary technique, which allows the generation of extremely powerful femtosecond pulses in the infrared and visible spectral ranges. Such pulses are nowadays an indispensable tool for a myriad of applications, both in fundamental and applied research. In recent years, a strong need emerged for light sources producing ultra-short and intense laser-like X-ray pulses, to be used for experiments in a variety of disciplines, ranging from physics and chemistry to biology and material sciences. This demand was satisfied by the advent of short-wavelength free-electron lasers. However, for any given free-electron laser setup, a limit presently exists in the generation of ultra-short pulses carrying substantial energy. Here we present the experimental implementation of chirped pulse amplification on a seeded free-electron laser in the extreme-ultraviolet, paving the way to the generation of fully coherent sub-femtosecond gigawatt pulses in the water window (2.3-4.4 nm).

  5. Design of broad angular phase retarders for the complete polarization analysis of extreme ultraviolet radiation

    Science.gov (United States)

    Lin, Cheng-You; Chen, Shu-Jing; Chen, Zhao-Yang; Ding, Ying-Chun

    2015-11-01

    A method of designing broad angular phase retarders in the extreme ultraviolet (EUV) region is presented. The design is based on a standard Levenberg-Marquardt algorithm combined with a common merit function. Using this method, a series of broad angular EUV phase retarders were designed using aperiodic Mo/Si multilayers. At photon energy of 90 eV, broad angular phase retarders with 30°, 60°, and 90° phase retardations have been realized in the angular range of 39°-51°. By analyzing and comparing the performances of the designed broad angular phase retarders, we found that the Mo/Si multilayer with more layers could obtain higher phase retardation in broader angular range when used to design the broad angular phase retarder. Broad angular phase retarders possess lower sensitivity toward changing incident angle compared with the traditional phase retarders designed with transmission periodic multilayers, and can be used for the polarization control of broad angular EUV sources. Project supported by the Fundamental Research Funds for the Central Universities, China (Grant Nos. JD1517, ZY1349, and 2652014012).

  6. Extreme ultraviolet interferometry of laser plasma material between the critical and ablation surfaces

    Science.gov (United States)

    Gartside, L. M. R.; Tallents, G. J.; Rossall, A. K.; Wagenaars, E.; Whittaker, D. S.; Kozlová, M.; Nejdl, J.; Sawicka, M.; Polan, J.; Kalal, M.; Rus, B.

    2011-06-01

    Interferometric probing using an extreme ultraviolet (EUV) laser has measured both transmission and phase information through laser-irradiated plastic (parylene-N C 8H 8) targets (thickness 350 nm). Unusually, the probe beam is incident longitudinally in approximately the same direction as the incident optical laser. Agreement of the experimental interferometry results has been obtained with two-dimensional radiation hydrodynamic code (h2d) simulations of EUV (21.2 nm) probe transmissions and phase shifts. We show that the transmission of the EUV probe beam provides a measure of the rate of target ablation, as ablated plasma becomes close to transparent when the photon energy is less than the ionization energy of the predominate ion species. Here C 3+ ions with ionization energy 64.5 eV are transparent, while lower carbon ionization stages, present in the unablated target and close to the ablation surface, absorb the 58.5 eV photons. Similarly, we show that refractive indices η below the solid parylene-N ( ηsolid = 0.946) and expected plasma values are produced in the warm dense plasma created by laser irradiation due to bound-free absorption in C +.

  7. Deprotection blue in extreme ultraviolet photoresists: influence of base loading and post-exposure bake temperture

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Christopher N.; Naulleau, Patrick P.

    2008-06-02

    The deprotection blur of Rohm and Haas XP 5435, XP 5271, and XP5496 extreme ultraviolet photoresists has been determined as their base weight percent is varied. They have also determined the deprotection blur of TOK EUVR P1123 photoresist as the post-exposure bake temperature is varied from 80 C to 120 C. In Rohm and Haas XP 5435 and XP5271 resists 7x and 3x (respective) increases in base weight percent reduce the size of successfully patterned 1:1 line-space features by 16 nm and 8 nm with corresponding reductions in deprotection blur of 7 nm and 4 nm. In XP 5496 a 7x increase in base weight percent reduces the size of successfully patterned 1:1 line-space features from 48 nm to 38 nm without changing deprotection blur. In TOK EUVR P1123 resist, a reduction in post-exposure bake temperature from 100 C to 80 C reduces deprotection blur from 21 nm to 10 nm and reduces patterned LER from 4.8 nm to 4.1 nm.

  8. Characterization of material ablation driven by laser generated intense extreme ultraviolet light

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Nozomi, E-mail: tanaka-n@ile.osaka-u.ac.jp; Masuda, Masaya; Deguchi, Ryo; Murakami, Masakatsu; Fujioka, Shinsuke; Yogo, Akifumi; Nishimura, Hiroaki [Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871 (Japan); Sunahara, Atsushi [Institute for Laser Technology, 2-6 Yamadaoka, Suita, Osaka 565-0871 (Japan)

    2015-09-14

    We present a comparative study on the hydrodynamic behaviour of plasmas generated by material ablation by the irradiation of nanosecond extreme ultraviolet (EUV or XUV) or infrared laser pulses on solid samples. It was clarified that the difference in the photon energy deposition and following material heating mechanism between these two lights result in the difference in the plasma parameters and plasma expansion characteristics. Silicon plate was ablated by either focused intense EUV pulse (λ = 9–25 nm, 10 ns) or laser pulse (λ = 1064 nm, 10 ns), both with an intensity of ∼10{sup 9 }W/cm{sup 2}. Both the angular distributions and energy spectra of the expanding ions revealed that the photoionized plasma generated by the EUV light differs significantly from that produced by the laser. The laser-generated plasma undergoes spherical expansion, whereas the EUV-generated plasma undergoes planar expansion in a comparatively narrow angular range. It is presumed that the EUV radiation is transmitted through the expanding plasma and directly photoionizes the samples in the solid phase, consequently forming a high-density and high-pressure plasma. Due to a steep pressure gradient along the direction of the target normal, the EUV plasma expands straightforward resulting in the narrower angular distribution observed.

  9. Fabrication of diffractive optical components for an extreme ultraviolet shearing interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Spector, S.J. (Department of Physics, State University of New York at Stony Brook, Stony Brook, New York 11794 (United States)); Tennant, D.M. (AT T Bell Laboratories, Holmdel, New Jersey 07733 (United States)); Tan, Z. (AT T Bell Laboratories, 510E Brookhaven National Laboratory, Upton, New York 11973 (United States)); Bjorkholm, J.E. (AT T Bell Laboratories, Holmdel, New Jersey 07733 (United States))

    1994-11-01

    We have constructed four optical components for use in an extreme ultraviolet shearing interferometer which will operate at a wavelength of 13.4 nm. The components that have been constructed include transmission diffractive optical components such as a Fresnel zone plate, angled gratings, and two-frequency gratings, as well as pinhole apertures. All the components are fabricated in 110 nm of Ge, which is supported by a 0.5--0.7-[mu]m-thick membrane of Si. The patterns were fabricated by first evaporating Ge and then spinning 100 nm polymethylmethacrylate (PMMA) onto the Si membranes. The desired patterns were exposed in the PMMA resist using electron beam lithography. Custom interative computer programs generated the patterns used to control the exposure. After developing the PMMA resist the Ge layer was etched using a reactive ion etching technique. Electron microscopy of the finished components show that the smallest features in our components are cleanly constructed, and the linewidths and placement of the features meet the desired accuracy.

  10. Structural Characterization and Lifetime Stability of Mo/Y Extreme Ultraviolet Multilayer Mirrors

    Energy Technology Data Exchange (ETDEWEB)

    Kjornrattanawanich, B; Bajt, S

    2004-05-20

    We observe a dramatic dependence of the extreme ultraviolet (EUV) reflectivity of Mo/Y multilayers on the oxygen content of yttrium. This is explained by a change in microstructure, increase in roughness of the Y layers and not by an increase in absorption due to oxygen in Y layers. We find best reflectivity of 38.4% is achieved with an oxygen content of 25%, which reduces to 32.6% and 29.6% for multilayers manufactured from oxygen free yttrium and 39%-oxygen yttrium, respectively. These results highlight the importance of experimentally determined optical constants as well as interface roughness in multilayer calculations. In addition, lifetime stability of Mo/Y multilayers with different capping layers was monitored for one year. The molybdenum- and palladium-capped samples exhibited low surface roughness and about 4% relative reflectivity loss in one year. The relative reflectivity loss on yttrium-capped sample (yttrium with 39% oxygen) was about 8%. However, the reflectivity loss in all three capping layers occurred within the first 100 days after the deposition and the reflectivity remained stable afterwards.

  11. Chirped pulse amplification in an extreme-ultraviolet free-electron laser.

    Science.gov (United States)

    Gauthier, David; Allaria, Enrico; Coreno, Marcello; Cudin, Ivan; Dacasa, Hugo; Danailov, Miltcho Boyanov; Demidovich, Alexander; Di Mitri, Simone; Diviacco, Bruno; Ferrari, Eugenio; Finetti, Paola; Frassetto, Fabio; Garzella, David; Künzel, Swen; Leroux, Vincent; Mahieu, Benoît; Mahne, Nicola; Meyer, Michael; Mazza, Tommaso; Miotti, Paolo; Penco, Giuseppe; Raimondi, Lorenzo; Ribič, Primož Rebernik; Richter, Robert; Roussel, Eléonore; Schulz, Sebastian; Sturari, Luca; Svetina, Cristian; Trovò, Mauro; Walker, Paul Andreas; Zangrando, Marco; Callegari, Carlo; Fajardo, Marta; Poletto, Luca; Zeitoun, Philippe; Giannessi, Luca; De Ninno, Giovanni

    2016-12-01

    Chirped pulse amplification in optical lasers is a revolutionary technique, which allows the generation of extremely powerful femtosecond pulses in the infrared and visible spectral ranges. Such pulses are nowadays an indispensable tool for a myriad of applications, both in fundamental and applied research. In recent years, a strong need emerged for light sources producing ultra-short and intense laser-like X-ray pulses, to be used for experiments in a variety of disciplines, ranging from physics and chemistry to biology and material sciences. This demand was satisfied by the advent of short-wavelength free-electron lasers. However, for any given free-electron laser setup, a limit presently exists in the generation of ultra-short pulses carrying substantial energy. Here we present the experimental implementation of chirped pulse amplification on a seeded free-electron laser in the extreme-ultraviolet, paving the way to the generation of fully coherent sub-femtosecond gigawatt pulses in the water window (2.3-4.4 nm).

  12. Surface modification of polymers for biocompatibility via exposure to extreme ultraviolet radiation.

    Science.gov (United States)

    Inam Ul Ahad; Bartnik, Andrzej; Fiedorowicz, Henryk; Kostecki, Jerzy; Korczyc, Barbara; Ciach, Tomasz; Brabazon, Dermot

    2014-09-01

    Polymeric biomaterials are being widely used for the treatment of various traumata, diseases and defects in human beings due to ease in their synthesis. As biomaterials have direct interaction with the extracellular environment in the biological world, biocompatibility is a topic of great significance. The introduction or enhancement of biocompatibility in certain polymers is still a challenge to overcome. Polymer biocompatibility can be controlled by surface modification. Various physical and chemical methods (e.g., chemical and plasma treatment, ion implantation, and ultraviolet irradiation etc.) are in use or being developed for the modification of polymer surfaces. However an important limitation in their employment is the alteration of bulk material. Different surface and bulk properties of biomaterials are often desirable for biomedical applications. Because extreme ultraviolet (EUV) radiation penetration is quite limited even in low density mediums, it could be possible to use it for surface modification without influencing the bulk material. This article reviews the degree of biocompatibility of different polymeric biomaterials being currently employed in various biomedical applications, the surface properties required to be modified for biocompatibility control, plasma and laser ablation based surface modification techniques, and research studies indicating possible use of EUV for enhancing biocompatibility.

  13. Droplet-based, high-brightness extreme ultraviolet laser plasma source for metrology

    Science.gov (United States)

    Vinokhodov, A. Yu.; Krivokorytov, M. S.; Sidelnikov, Yu. V.; Krivtsun, V. M.; Medvedev, V. V.; Koshelev, K. N.

    2016-10-01

    We report on the development of a high brightness source of extreme ultraviolet radiation (EUV) with a working wavelength of 13.5 nm. The source is based on a laser-produced plasma driven by pulsed radiation of a Nd:YAG laser system. Liquid droplets of Sn-In eutectic alloy were used as the source fuel. The droplets were created by a droplet generator operating in the jet break-up regime. The EUV emission properties of the plasma, including the emission spectrum, time profile, and conversion efficiency of laser radiation into useful 13.5 nm photons, have been characterized. Using the shadowgraphy technique, we demonstrated the production of corpuscular debris by the plasma source and the influence of the plasma on the neighboring droplet targets. The high-frequency laser operation was simulated by usage of the dual pulse regime. Based on the experimental results, we discuss the physical phenomena that could affect the source operation at high repetition rates. Finally, we estimate that an average source brightness of 1.2 kW/mm2 sr is feasible at a high repetition rate.

  14. Surface phenomena related to mirror degradation in extreme ultraviolet (EUV) lithography

    Energy Technology Data Exchange (ETDEWEB)

    Madey, Theodore E. [Department of Physics and Astronomy, Laboratory for Surface Modification, Rutgers, State University of New Jersey, Piscataway, NJ 08854-8019 (United States)]. E-mail: madey@physics.rutgers.edu; Faradzhev, Nadir S. [Department of Physics and Astronomy, Laboratory for Surface Modification, Rutgers, State University of New Jersey, Piscataway, NJ 08854-8019 (United States); Yakshinskiy, Boris V. [Department of Physics and Astronomy, Laboratory for Surface Modification, Rutgers, State University of New Jersey, Piscataway, NJ 08854-8019 (United States); Edwards, N.V. [EUV Lithography Strategy Group, SEMATECH, 2706 Montopolis Dr., Austin, TX 78741-6499 (United States)

    2006-12-15

    One of the most promising methods for next generation device manufacturing is extreme ultraviolet (EUV) lithography, which uses 13.5 nm wavelength radiation generated from freestanding plasma-based sources. The short wavelength of the incident illumination allows for a considerable decrease in printed feature size, but also creates a range of technological challenges not present for traditional optical lithography. Contamination and oxidation form on multilayer reflecting optics surfaces that not only reduce system throughput because of the associated reduction in EUV reflectivity, but also introduce wavefront aberrations that compromise the ability to print uniform features. Capping layers of ruthenium, films {approx}2 nm thick, are found to extend the lifetime of Mo/Si multilayer mirrors used in EUV lithography applications. However, reflectivities of even the Ru-coated mirrors degrade in time during exposure to EUV radiation. Ruthenium surfaces are chemically reactive and are very effective as heterogeneous catalysts. In the present paper we summarize the thermal and radiation-induced surface chemistry of bare Ru exposed to gases; the emphasis is on H{sub 2}O vapor, a dominant background gas in vacuum processing chambers. Our goal is to provide insights into the fundamental physical processes that affect the reflectivity of Ru-coated Mo/Si multilayer mirrors exposed to EUV radiation. Our ultimate goal is to identify and recommend practices or antidotes that may extend mirror lifetimes.

  15. Viability of pattern shift for defect-free extreme ultraviolet lithography photomasks

    Science.gov (United States)

    Qi, Zhengqing John; Rankin, Jed; Narita, Eisuke; Kagawa, Masayuki

    2016-04-01

    Several challenges hinder extreme ultraviolet lithography (EUVL) photomask fabrication and its readiness for high-volume manufacturing (HVM). The lack in availability of pristine defect-free blanks as well as the absence of a robust mask repair technique mandates defect mitigation through pattern shift for the production of defect-free photomasks. By using known defect locations on a blank, the mask design can be intentionally shifted to avoid patterning directly over a defect. The work presented here provides a comprehensive look at pattern shift implementation to intersect EUV HVM for the 7-nm technology node (N7). An empirical error budget to compensate for various measurement errors, based on the latest HVM inspection and write tool capabilities, is first established and then verified postpatterning. The validated error budget is applied to 20 representative EUV blanks and pattern shift is performed using fully functional N7 chip designs that were recently used to fabricate working silicon-germanium devices. Probability of defect-free masks are explored for various N7 photomask levels, including metal, contact, and gate cut layers. From these results, an assessment is made on the current viability of defect-free EUV masks and what is required to construct a complete defect-free EUV mask set.

  16. Design considerations of 10 kW-scale, extreme ultraviolet SASE FEL for lithography

    CERN Document Server

    Pagani, C; Schneidmiller, E A; Yurkov, M V

    2001-01-01

    The semiconductor industry growth is driven to a large extent by steady advancements in microlithography. According to the newly updated industry road map, the 70 nm generation is anticipated to be available in the year 2008. However, the path to get there is not clear. The problem of construction of extreme ultraviolet (EUV) quantum lasers for lithography is still unsolved: progress in this field is rather moderate and we cannot expect a significant breakthrough in the near future. Nevertheless, there is clear path for optical lithography to take us to sub-100 nm dimensions. Theoretical and experimental work in Self-Amplified Spontaneous Emission (SASE) Free Electron Lasers (FEL) physics and the physics of superconducting linear accelerators over the last 10 years has pointed to the possibility of the generation of high-power optical beams with laser-like characteristics in the EUV spectral range. Recently, there have been important advances in demonstrating a high-gain SASE FEL at 100 nm wavelength (J. Andr...

  17. Stable droplet generator for a high brightness laser produced plasma extreme ultraviolet source

    Science.gov (United States)

    Vinokhodov, A.; Krivokorytov, M.; Sidelnikov, Yu.; Krivtsun, V.; Medvedev, V.; Bushuev, V.; Koshelev, K.; Glushkov, D.; Ellwi, S.

    2016-10-01

    We present the results of the low-melting liquid metal droplets generation based on excited Rayleigh jet breakup. We discuss on the operation of the industrial and in-house designed and manufactured dispensing devices for the droplets generation. Droplet diameter can be varied in the range of 30-90 μm. The working frequency of the droplets, velocity, and the operating temperature were in the ranges of 20-150 kHz, 4-15 m/s, and up to 250 °C, respectively. The standard deviations for the droplet center of mass position both their diameter σ < 1 μm at the distance of 45 mm from the nozzle. Stable operation in the long-term (over 1.5 h) was demonstrated for a wide range of the droplet parameters: diameters, frequencies, and velocities. Physical factors affecting the stability of the generator operation have been identified. The technique for droplet synchronization, allowing using the droplet as a target for laser produced plasma, has been created; in particular, the generator has been successfully used in a high brightness extreme ultraviolet (EUV) light source. The operation with frequency up to 8 kHz was demonstrated as a result of the experimental simulation, which can provide an average brightness of the EUV source up to ˜1.2 kW/mm2 sr.

  18. Compact 13.5-nm free-electron laser for extreme ultraviolet lithography

    Directory of Open Access Journals (Sweden)

    Y. Socol

    2011-04-01

    Full Text Available Optical lithography has been actively used over the past decades to produce more and more dense integrated circuits. To keep with the pace of the miniaturization, light of shorter and shorter wavelength was used with time. The capabilities of the present 193-nm UV photolithography were expanded time after time, but it is now believed that further progress will require deployment of extreme ultraviolet (EUV lithography based on the use of 13.5-nm radiation. However, presently no light source exists with sufficient average power to enable high-volume manufacturing. We report here the results of a study that shows the feasibility of a free-electron laser EUV source driven by a multiturn superconducting energy-recovery linac (ERL. The proposed 40×20  m^{2} facility, using MW-scale consumption from the power grid, is estimated to provide about 5 kW of average EUV power. We elaborate the self-amplified spontaneous emission (SASE option, which is presently technically feasible. A regenerative-amplifier option is also discussed. The proposed design is based on a short-period (2–3 cm undulator. The corresponding electron beam energy is about 0.5–1.0 GeV. The proposed accelerator consists of a photoinjector, a booster, and a multiturn ERL.

  19. Identification and Plasma Diagnostics Study of Extreme Ultraviolet Transitions in Highly Charged Yttrium

    Directory of Open Access Journals (Sweden)

    Roshani Silwal

    2017-09-01

    Full Text Available Extreme ultraviolet spectra of the L-shell ions of highly charged yttrium (Y 26 + –Y 36 + were observed in the electron beam ion trap of the National Institute of Standards and Technology using a flat-field grazing-incidence spectrometer in the wavelength range of 4 nm-20 nm. The electron beam energy was systematically varied from 2.3 keV–6.0 keV to selectively produce different ionization stages. Fifty-nine spectral lines corresponding to Δ n = 0 transitions within the n = 2 and n = 3 shells have been identified using detailed collisional-radiative (CR modeling of the non-Maxwellian plasma. The uncertainties of the wavelength determinations ranged between 0.0004 nm and 0.0020 nm. Li-like resonance lines, 2s– 2 p 1 / 2 and 2s–2 p 3 / 2 , and the Na-like D lines, 3s– 3 p 1 / 2 and 3s– 3 p 3 / 2 , have been measured and compared with previous measurements and calculations. Forbidden magnetic dipole (M1 transitions were identified and analyzed for their potential applicability in plasma diagnostics using large-scale CR calculations including approximately 1.5 million transitions. Several line ratios were found to show strong dependence on electron density and, hence, may be implemented in the diagnostics of hot plasmas, in particular in fusion devices.

  20. Extreme ultraviolet emission and confinement of tin plasmas in the presence of a magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Roy, Amitava, E-mail: roy@fzu.cz, E-mail: aroy@barc.gov.in [School of Nuclear Engineering and Center for Materials Under Extreme Environment(CMUXE), Purdue University, West Lafayette, Indiana 47907 (United States); HiLASE Project, Department of Diode-pumped Lasers, Institute of Physics of the ASCR, Na Slovance 2, 18221 Prague (Czech Republic); Murtaza Hassan, Syed; Harilal, Sivanandan S.; Hassanein, Ahmed [School of Nuclear Engineering and Center for Materials Under Extreme Environment(CMUXE), Purdue University, West Lafayette, Indiana 47907 (United States); Endo, Akira; Mocek, Tomas [HiLASE Project, Department of Diode-pumped Lasers, Institute of Physics of the ASCR, Na Slovance 2, 18221 Prague (Czech Republic)

    2014-05-15

    We investigated the role of a guiding magnetic field on extreme ultraviolet (EUV) and ion emission from a laser produced Sn plasma for various laser pulse duration and intensity. For producing plasmas, planar slabs of pure Sn were irradiated with 1064 nm, Nd:YAG laser pulses with varying pulse duration (5–15 ns) and intensity. A magnetic trap was fabricated with the use of two neodymium permanent magnets which provided a magnetic field strength ∼0.5 T along the plume expansion direction. Our results indicate that the EUV conversion efficiency do not depend significantly on applied axial magnetic field. Faraday Cup ion analysis of Sn plasma show that the ion flux reduces by a factor of ∼5 with the application of an axial magnetic field. It was found that the plasma plume expand in the lateral direction with peak velocity measured to be ∼1.2 cm/μs and reduced to ∼0.75 cm/μs with the application of an axial magnetic field. The plume expansion features recorded using fast photography in the presence and absence of 0.5 T axial magnetic field are simulated using particle-in-cell code. Our simulation results qualitatively predict the plasma behavior.

  1. Control of coherent excitation of neon in the extreme ultraviolet regime.

    Science.gov (United States)

    Plenge, Jürgen; Wirsing, Andreas; Raschpichler, Christopher; Wassermann, Bernhard; Rühl, Eckart

    2011-01-01

    Coherent excitation of a superposition of Rydberg states in neon by the 13th harmonic of an intense 804 nm pulse and the formation of a wave packet is reported. Pump-probe experiments are performed, where the 3d-manifold of the 2p6-->2p5 (2P3/2) 3d [1/2]1- and 2p6-->2p5 (2P3/2) 3d [3/2]1-transitions are excited by an extreme ultraviolet (XUV) radiation pulse, which is centered at 20.05 eV photon energy. The temporal evolution of the excited state population is probed by ionization with a time-delayed 804 nm pulse. Control of coherent transient excitation and wave packet dynamics in the XUV-regime is demonstrated, where the spectral phase of the 13th harmonic is used as a control parameter. Modulation of the phase is achieved by propagation of the XUV-pulse through neon of variable gas density. The experimental results indicate that phase-shaped high-order harmonics can be used to control fundamental coherent excitation processes in the XUV-regime.

  2. The Extreme Ultraviolet Contributions to the Solar Irradiance Reference Spectrum (SIRS)

    Science.gov (United States)

    Chamberlin, P. C.; Woods, T. N.; Harder, J. W.; Hock, R. A.; Snow, M.

    2008-12-01

    The Whole Heliosphere Interval (WHI) was a coordinated effort with inputs from over 50 models and observatories, both satellite and ground based, to characterize the Sun and heliosphere during solar minimum conditions. The time period selected for this quiet Sun WHI campaign was April 10-16, 2008. One of the goals of the solar minimum WHI was to produce a definitive Solar Irradiance Reference Spectrum (SIRS) for quiet Sun conditions ranging in wavelength from 0.1 nm up to 2400 nm. During this WHI campaign on April 14, 2008, a sounding rocket was launched from White Sands Missile Range that observed the solar spectral irradiance in these solar minimum conditions in the extreme ultraviolet (EUV) wavelength range from 0.1-106 nm as well as the bright hydrogen Lyman alpha emission at 121.6 nm. The rocket observations from 6.0-106.0 nm and at 0.1 nm spectral resolution are the EUV input for the SIRS. These rocket EUV measurements are discussed following a brief introduction to the entire SIRS spectrum developed for the WHI campaign.

  3. Imaging properties of Wolter I type x-ray telescopes.

    Science.gov (United States)

    Werner, W

    1977-03-01

    By ray-tracing methods we have investigated various configurations of Wolter I type x-ray telescopes. For the criterion of image quality the shape of the line spread function has been chosen. The angular resolution we find herewith in a large region of the basic parameters appears to be more than three times higher than results from the rms blur circle criterion. We have concluded that in most cases of practical interest the paraboloid-hyperboloid combination has to be preferred to the Schwarzschild system. In all cases it is possible to find a solution giving an extra improvement of the angular resolution with a factor between,2 and 4 when we describe the mirror shapes with polynomials.

  4. Recent results from extreme ultraviolet lithography patterned mask inspection for 11 nm half-pitch generation using projection electron microscope system

    Science.gov (United States)

    Hirano, Ryoichi; Iida, Susumu; Amano, Tsuyoshi; Watanabe, Hidehiro; Hatakeyama, Masahiro; Murakami, Takeshi; Suematsu, Kenichi; Terao, Kenji

    2016-05-01

    Extreme ultraviolet lithography (EUVL) is a promising technique for 1X nm half-pitch (hp) generation lithography. The inspection of patterned EUVL masks is one of the main issues that must be addressed during mask fabrication for manufacture of devices with 11 nm hp feature sizes. We have already designed projection electron microscope (PEM) optics that have been integrated into a new inspection system called Model EBEYE-V30 (where "Model EBEYE" is an EBARA's model code) and this system seems quite promising for 16 nm hp generation EUVL patterned mask inspection. The defect inspection sensitivity of this system was evaluated via capture of an electron image that was generated at the mask by focusing the image through the projection optics onto a time-delay integration (TDI) image sensor. For increased throughput and higher defect detection sensitivity, a new electron-sensitive area image sensor with a high-speed data processing unit, a bright and stable electron source, and a simultaneous deflector for the image capture area that follows the mask scanning motion have been developed. Using a combination of synchronous deflection and mask scanning, the image can be integrated into both the fixed area image sensor and the TDI image sensor. We describe our experimental results for EUV patterned mask inspection using the above system. Elements have been developed for inspection tool integration and the designed specification has been verified. The system performance demonstrates the defect detectability required for 11 nm hp generation EUVL masks.

  5. Flux rope, hyperbolic flux tube, and late extreme ultraviolet phases in a non-eruptive circular-ribbon flare

    Science.gov (United States)

    Masson, Sophie; Pariat, Étienne; Valori, Gherardo; Deng, Na; Liu, Chang; Wang, Haimin; Reid, Hamish

    2017-08-01

    Context. The dynamics of ultraviolet (UV) emissions during solar flares provides constraints on the physical mechanisms involved in the trigger and the evolution of flares. In particular it provides some information on the location of the reconnection sites and the associated magnetic fluxes. In this respect, confined flares are far less understood than eruptive flares generating coronal mass ejections. Aims: We present a detailed study of a confined circular flare dynamics associated with three UV late phases in order to understand more precisely which topological elements are present and how they constrain the dynamics of the flare. Methods: We perform a non-linear force-free field extrapolation of the confined flare observed with the Helioseismic and Magnetic Imager (HMI) and Atmospheric Imaging Assembly (AIA) instruments on board Solar Dynamics Observatory (SDO). From the 3D magnetic field we compute the squashing factor and we analyse its distribution. Conjointly, we analyse the AIA extreme ultraviolet (EUV) light curves and images in order to identify the post-flare loops, and their temporal and thermal evolution. By combining the two analyses we are able to propose a detailed scenario that explains the dynamics of the flare. Results: Our topological analysis shows that in addition to a null-point topology with the fan separatrix, the spine lines and its surrounding quasi-separatix layer (QSL) halo (typical for a circular flare), a flux rope and its hyperbolic flux tube (HFT) are enclosed below the null. By comparing the magnetic field topology and the EUV post-flare loops we obtain an almost perfect match between the footpoints of the separatrices and the EUV 1600 Å ribbons and between the HFT field line footpoints and bright spots observed inside the circular ribbons. We show, for the first time in a confined flare, that magnetic reconnection occurred initially at the HFT below the flux rope. Reconnection at the null point between the flux rope and the

  6. Moon-based Epoch of Reionization Imaging Telescope (MERIT)

    Science.gov (United States)

    Jones, D. L.; MacDowall, R. J.; Bale, S. D.; Demaio, L.; Kasper, J. C.; Weiler, K. W.

    2005-05-01

    Radio observations of emission and absorption from neutral Hydrogen during the Epoch of Reionization (EoR) can reveal how structure leading to the first stars, galaxies, and black holes formed in the intergalactic medium between redshifts of about 6 and at least 20. Ground-based low frequency radio arrays are under construction (LOFAR, PAST) or development (LWA, MWA) to detect and eventually image the EoR signal. The Moon-based Epoch of Reionization Imaging Telescope (MERIT) is a mission concept that is intended to extend ground-based observations of the EoR to the highest possible dynamic range and image fidelity. This can be accomplished by locating the MERIT array on the far side of the moon. The array is composed of 10-12 radial arms, each 1-2 km in length. Each arm has several hundred dipole antennas and feedlines printed on a very thin sheet of kapton with a total mass of about 300 kg. This provides a convenient way to deploy thousands of individual antennas, and a centrally condensed distribution of array baselines. The lunar farside provides shielding from terrestrial natural and technological radio interference, shielding (half the time) from strong solar radio emissions, and freedom from the corrupting influence of Earth's ionosphere. Various options for array deployment and data transmission to Earth will be described is this paper. Part of this work was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration.

  7. FNIT: the fast neutron imaging telescope for SNM detection

    Science.gov (United States)

    Bravar, Ulisse; Bruillard, Paul J.; Flückiger, Erwin O.; Macri, John R.; McConnell, Mark L.; Moser, Michael R.; Ryan, James M.

    2006-05-01

    We report on recent progress in the development of the Fast Neutron Imaging Telescope (FNIT), a detector with both imaging and energy measurement capabilities, sensitive to neutrons in the 2-20 MeV range. FNIT was initially conceived to study solar neutrons as a candidate design for the Solar Sentinels program under formulation at NASA. This instrument is now being configured to locate fission neutron sources for homeland security purposes. By accurately identifying the position of the neutron source with imaging techniques and reconstructing the energy spectrum of fission neutrons, FNIT can locate problematic amounts of Special Nuclear Material (SNM), including heavily shielded and masked samples. The detection principle is based on multiple elastic neutron-proton (n-p) scatterings in organic scintillators. By reconstructing the n-p event locations and sequence and measuring the recoil proton energies, the direction and energy spectrum of the primary neutron flux can be determined and neutron point sources identified. The performance of FNIT is being evaluated through a series of Monte Carlo simulations and lab tests of detector prototypes. The Science Model One (SM1) of this instrument was recently assembled and is presently undergoing performance testing.

  8. A fast-time-response extreme ultraviolet spectrometer for measurement of impurity line emissions in the Experimental Advanced Superconducting Tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Ling; Xu, Zong; Wu, Zhenwei; Zhang, Pengfei; Wu, Chengrui; Gao, Wei; Shen, Junsong; Chen, Yingjie; Liu, Xiang; Wang, Yumin; Gong, Xianzu; Hu, Liqun; Chen, Junlin; Zhang, Xiaodong; Wan, Baonian; Li, Jiangang [Institute of Plasma Physics Chinese Academy of Sciences, Hefei 230026, Anhui (China); Morita, Shigeru; Ohishi, Tetsutarou; Goto, Motoshi [National Institute for Fusion Science, Toki 509-5292, Gifu (Japan); Department of Fusion Science, Graduate University for Advanced Studies, Toki 509-5292, Gifu (Japan); Dong, Chunfeng [Southwestern Institute of Physics, Chengdu 610041, Sichuan (China); and others

    2015-12-15

    A flat-field extreme ultraviolet (EUV) spectrometer working in the 20-500 Å wavelength range with fast time response has been newly developed to measure line emissions from highly ionized tungsten in the Experimental Advanced Superconducting Tokamak (EAST) with a tungsten divertor, while the monitoring of light and medium impurities is also an aim in the present development. A flat-field focal plane for spectral image detection is made by a laminar-type varied-line-spacing concave holographic grating with an angle of incidence of 87°. A back-illuminated charge-coupled device (CCD) with a total size of 26.6 × 6.6 mm{sup 2} and pixel numbers of 1024 × 255 (26 × 26 μm{sup 2}/pixel) is used for recording the focal image of spectral lines. An excellent spectral resolution of Δλ{sub 0} = 3-4 pixels, where Δλ{sub 0} is defined as full width at the foot position of a spectral line, is obtained at the 80-400 Å wavelength range after careful adjustment of the grating and CCD positions. The high signal readout rate of the CCD can improve the temporal resolution of time-resolved spectra when the CCD is operated in the full vertical binning mode. It is usually operated at 5 ms per frame. If the vertical size of the CCD is reduced with a narrow slit, the time response becomes faster. The high-time response in the spectral measurement therefore makes possible a variety of spectroscopic studies, e.g., impurity behavior in long pulse discharges with edge-localized mode bursts. An absolute intensity calibration of the EUV spectrometer is also carried out with a technique using the EUV bremsstrahlung continuum at 20-150 Å for quantitative data analysis. Thus, the high-time resolution tungsten spectra have been successfully observed with good spectral resolution using the present EUV spectrometer system. Typical tungsten spectra in the EUV wavelength range observed from EAST discharges are presented with absolute intensity and spectral identification.

  9. Polyarylenesulfonium Salt as a Novel and Versatile Nonchemically Amplified Negative Tone Photoresist for High-Resolution Extreme Ultraviolet Lithography Applications.

    Science.gov (United States)

    Reddy, Pulikanti Guruprasad; Pal, Satyendra Prakash; Kumar, Pawan; Pradeep, Chullikkattil P; Ghosh, Subrata; Sharma, Satinder K; Gonsalves, Kenneth E

    2017-01-11

    The present report demonstrates the potential of a polyarylenesulfonium polymer, poly[methyl(4-(phenylthio)-phenyl)sulfoniumtrifluoromethanesulfonate] (PAS), as a versatile nonchemically amplified negative tone photoresist for next-generation lithography (NGL) applications starting from i-line (λ ∼ 365 nm) to extreme ultraviolet (EUV, λ ∼ 13.5 nm) lithography. PAS exhibited considerable contrast (γ), 0.08, toward EUV and patterned 20 nm features successfully.

  10. Generation, temporal characterization and applications of femtosecond-/ attosecond extreme ultraviolet pulses

    Science.gov (United States)

    Thomann, Isabell

    The work of this thesis is arranged into three parts: (A) Generation and temporal characterization of extreme ultraviolet (EUV) attosecond pulses. In this work I present the generation and first temporal characterization of sub-optical cycle EUV radiation generated in a noble-gas filled hollow-core waveguide. Two regimes of EUV radiation were characterized, ranging from 200 attoseconds to ˜ 1 femtosecond in duration. The first regime that was characterized distinguishes itself from EUV radiation generated by other methods by its narrow (˜ 1 eV) spectral width, its simple energy tunability and its temporal confinement to ˜ 1 femtosecond. In the second regime, single isolated pulses of 200 attoseconds duration (and accordingly larger bandwidth) were generated. In both regimes dynamic phase-matching effects create an extremely short time window within which efficient nonlinear conversion is possible, while it is suppressed outside this window. Temporal characterization of the generated EUV pulses was approached by two-color pump-probe photoelectron spectroscopy. Therefore an efficient photoelectron spectrometer was set up, detecting electrons in a 2pi collection angle. For the interpretation of the experimental data, an analytical model as well as an iterative algorithm were developed, to allow extraction of complex EUV waveforms. The demonstrated radiation will allow for time-resolved studies of the fastest processes in molecules and condensed matter, while at the same time ensuring adequate energy resolution for addressing individual electronic states. (B) Application of a COLTRIMS reaction microscope in combination with femtosecond EUV pulses to questions in molecular physics. The combination of the sensitive detection capabilities of a COLTRIMS reaction microscope with the high time resolution of pump-probe experiments using femtosecond extreme-ultraviolet pulses makes it possible to answer very fundamental open questions in molecular physics such as the

  11. AlGaN-on-Si backside illuminated photodetectors for the extreme ultraviolet (EUV) range

    Science.gov (United States)

    Malinowski, P. E.; Duboz, J.-Y.; John, J.; Sturdevant, C.; Das, J.; Derluyn, J.; Germain, M.; de Moor, P.; Minoglou, K.; Semond, F.; Frayssinet, E.; Hochedez, J.-F.; Giordanengo, B.; van Hoof, C.; Mertens, R.

    2010-04-01

    We report on the fabrication and characterization of solar blind Metal-Semiconductor-Metal (MSM) based photodetectors for use in the extreme ultraviolet (EUV) wavelength range. The devices were fabricated in the AlGaN-on- Si material system, with Aluminum Gallium Nitride (AlGaN) epitaxial layers grown on Si(111) by means of Molecular Beam Epitaxy. The detectors' IV characteristics and photoresponse were measured between 200 and 400 nm. Spectral responsivity was calculated for comparison with the state-of-the-art ultraviolet photodetectors. It reaches the order of 0.1 A/W at the cut-off wavelength of 360 nm, for devices with Au fingers of 3 μm width and spacing of 3 μm. The rejection ratio of visible radiation (400 nm) was more than 3 orders of magnitude. In the additional post-processing step, the Si substrate was removed locally under the active area of the MSM photodetectors using SF6-based Reactive Ion Etching (RIE). In such scheme, the backside illumination is allowed and there is no shadowing of the active layer by the metal electrodes, which is advantageous for the EUV sensitivity. Completed devices were assembled and wire-bonded in customized TO-8 packages with an opening. The sensitivity at EUV was verified at the wavelengths of 30.4 and 58.4 nm using a He-based beamline. AlGaN photodetectors are a promising alternative for highly demanding applications such as space science or modern EUV lithography. The backside illumination approach is suited in particular for large, 2D focal plane arrays.

  12. Structure and extreme ultraviolet performance of Si/C multilayers deposited under different working pressures.

    Science.gov (United States)

    Yi, Qiang; Huang, Qiushi; Wang, Xiangmei; Yang, Yang; Yang, Xiaowei; Zhang, Zhong; Wang, Zhanshan; Xu, Rongkun; Peng, Taiping; Zhou, Hongjun; Huo, Tonglin

    2017-02-01

    Narrow bandwidth Si/C multilayer mirrors are fabricated and characterized for the Z-pinch plasma diagnostic at a wavelength of 16.5 nm. To reduce the large stress of the multilayer and maintain a practical reflectivity, different working pressures, from 0.13 Pa to 0.52 Pa, are optimized during the deposition. The grazing incidence x-ray reflectometry (GIXR) measurement and the fitting results indicate that an interlayer was formed at the interfaces, while both the interlayer thickness and interface widths increase with larger working pressure. The surface roughness of the multilayers also increases from 0.13 nm at 0.13 Pa to 0.29 nm at 0.52 Pa, as revealed by the atomic force microscope (AFM) measurements. The multilayer stress decreases from -682 MPa to -384  MPa as the working pressure increases from 0.13 Pa to 0.52 Pa, respectively. The experimental extreme ultraviolet (EUV) reflectivity of the samples with 20 bilayers gradually decreased from 26.3% to 18.9% with increased working pressure. The bandwidth of the reflection peak remains similar for the different samples with a full width half-maximum (FWHM) value of around 0.87 nm. A maximum EUV reflectivity of 33.2% and a bandwidth of 0.64 nm were achieved by the sample with 50 bilayers fabricated under a working pressure of 0.13 Pa.

  13. Near infrared and extreme ultraviolet light pulses induced modifications of ultrathin Co films

    Directory of Open Access Journals (Sweden)

    Jan Kisielewski

    2017-05-01

    Full Text Available We report on comparative study of magnetic properties of Pt/Co/Pt trilayers after irradiation with different light sources. Ultrathin Pt/Co/Pt films were deposited by molecular beam epitaxy technique on sapphire (0001 substrates. Pt buffers were grown at room temperature (RT and at 750°C (high temperature, HT. The samples were irradiated with a broad range of light energy densities (up to film ablation using two different single pulse irradiation sources: (i 40 fs laser with 800 nm wavelength and (ii 3 ns laser-plasma source of extreme ultraviolet (EUV with the most intense emission centered at 11 nm. The light pulse-driven irreversible structural and as a consequence, magnetic modifications were investigated using polar magneto-optical Kerr effect-based microscopy and atomic and magnetic force microscopies. The light pulse-induced transitions from the out-of-plane to in-plane magnetization state, and from in-plane to out-of-plane, were observed for both types of samples and irradiation methods. Diagrams of the magnetic states as a function of the Co layer thickness and energy density of the absorbed femtosecond pulses were constructed for the samples with both the RT and HT buffers. The energy density range responsible for the creation of the out-of-plane magnetization was wider for the HT than for RT buffer. This is correlated with the higher (for HT crystalline quality and much smoother Pt/Co surface deduced from the X-ray diffraction studies. Submicrometer magnetic domains were observed in the irradiated region while approaching the out-of-plane magnetization state. Changes of Pt/Co/Pt structures are discussed for both types of light pulses.

  14. Extreme ultraviolet fluorescence spectroscopy of pure and core-shell rare gas clusters at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Schroedter, Lasse

    2013-08-15

    The interaction of rare gas clusters with short-wavelength radiation of free-electron lasers (FELs) has been studied extensively over the last decade by means of electron and ion time-of-flight spectroscopy. This thesis describes the design and construction of a fluorescence spectrometer for the extreme ultraviolet (XUV) spectral range and discusses the cluster experiments performed at FLASH, the Free-electron LAser in Hamburg. Fluorescence of xenon and of argon clusters was studied, both in dependence on the FEL pulse intensity and on the cluster size. The FEL wavelength was set to the giant 4d-resonance of xenon at 13.5 nm and the FEL pulse intensity reached peak values of 2.7.10{sup 15} W/cm{sup 2}. For xenon clusters, charge states of at least 11+ were identified. For argon, charge states up to 7+ were detected. The cluster-size dependent study revealed a decrease of the fluorescence yield per atom with increasing cluster size. This decrease is explained with the help of a geometric model. It assumes that virtually the entire fluorescence yield stems from shells of ions on the cluster surface, whereas ions in the cluster core predominantly recombine non-radiatively with electrons. However, the detailed analysis of fluorescence spectra from clusters consisting of a core of Xe atoms and a surrounding shell of argon atoms shows that, in fact, a small fraction of the fluorescence signal comes from Xe ions in the cluster core. Interestingly, these ions are as highly charged as the ions in the shells of a pure Xe cluster. This result goes beyond the current understanding of charge and energy transfer processes in these systems and points toward the observation of ultrafast charging dynamics in a time window where mass spectrometry is inherently blind. (orig.)

  15. Extending the path for efficient extreme ultraviolet sources for advanced nanolithography

    Science.gov (United States)

    Sizyuk, Tatyana; Hassanein, Ahmed

    2015-09-01

    Developing efficient light sources for extreme ultraviolet (EUV) lithography is one of the most important problems of high volume manufacturing (HVM) of the next generation computer chips. Critical components of this technology are continued to face challenges in the demanding performance for HVM. Current investigations of EUV and beyond EUV (BEUV) community are focused on the dual-pulse laser produced plasma (LPP) using droplets of mass-limited targets. Two main objectives as well as challenges in the optimization of these light sources are related to enhancement of the conversion efficiency (CE) of the source and increase components lifetime of the collector optical system. These require significant experimental and computer simulation efforts. These requirements call for fine detail analysis of various plasma physics processes involved in laser target interactions and their effects on source optimization. We continued to enhance our comprehensive HEIGHTS simulation package and upgrade our CMUXE laboratories to study and optimize the efficiency of LPP sources. Integrated modeling and experimental research were done to both benchmark simulation results and to make projections and realistic predictions of the development path for powerful EUVL devices for HVM requirements. We continued the detail analysis of dual-pulse laser systems using various laser wavelengths and delay times between the two pulses. We showed that the efficiency of EUV sources can be improved utilizing the higher harmonics of Nd:YAG laser for the prepulse and the first harmonics for the main pulse, while still having lower efficiency than the combination involving CO2 laser in the range of parameters studied in this case. The differences in optimization process as well as in the source characteristics for two combinations of laser wavelengths were analyzed based on details of atomic and hydrodynamics processes during the evolving plasma plumes.

  16. Determining the polarization state of an extreme ultraviolet free-electron laser beam using atomic circular dichroism.

    Science.gov (United States)

    Mazza, T; Ilchen, M; Rafipoor, A J; Callegari, C; Finetti, P; Plekan, O; Prince, K C; Richter, R; Danailov, M B; Demidovich, A; De Ninno, G; Grazioli, C; Ivanov, R; Mahne, N; Raimondi, L; Svetina, C; Avaldi, L; Bolognesi, P; Coreno, M; O'Keeffe, P; Di Fraia, M; Devetta, M; Ovcharenko, Y; Möller, Th; Lyamayev, V; Stienkemeier, F; Düsterer, S; Ueda, K; Costello, J T; Kazansky, A K; Kabachnik, N M; Meyer, M

    2014-04-16

    Ultrafast extreme ultraviolet and X-ray free-electron lasers are set to revolutionize many domains such as bio-photonics and materials science, in a manner similar to optical lasers over the past two decades. Although their number will grow steadily over the coming decade, their complete characterization remains an elusive goal. This represents a significant barrier to their wider adoption and hence to the full realization of their potential in modern photon sciences. Although a great deal of progress has been made on temporal characterization and wavefront measurements at ultrahigh extreme ultraviolet and X-ray intensities, only few, if any progress on accurately measuring other key parameters such as the state of polarization has emerged. Here we show that by combining ultra-short extreme ultraviolet free electron laser pulses from FERMI with near-infrared laser pulses, we can accurately measure the polarization state of a free electron laser beam in an elegant, non-invasive and straightforward manner using circular dichroism.

  17. Spin-resolved photoelectron spectroscopy using femtosecond extreme ultraviolet light pulses from high-order harmonic generation

    Science.gov (United States)

    Plötzing, M.; Adam, R.; Weier, C.; Plucinski, L.; Eich, S.; Emmerich, S.; Rollinger, M.; Aeschlimann, M.; Mathias, S.; Schneider, C. M.

    2016-04-01

    The fundamental mechanism responsible for optically induced magnetization dynamics in ferromagnetic thin films has been under intense debate since almost two decades. Currently, numerous competing theoretical models are in strong need for a decisive experimental confirmation such as monitoring the triggered changes in the spin-dependent band structure on ultrashort time scales. Our approach explores the possibility of observing femtosecond band structure dynamics by giving access to extended parts of the Brillouin zone in a simultaneously time-, energy- and spin-resolved photoemission experiment. For this purpose, our setup uses a state-of-the-art, highly efficient spin detector and ultrashort, extreme ultraviolet light pulses created by laser-based high-order harmonic generation. In this paper, we present the setup and first spin-resolved spectra obtained with our experiment within an acquisition time short enough to allow pump-probe studies. Further, we characterize the influence of the excitation with femtosecond extreme ultraviolet pulses by comparing the results with data acquired using a continuous wave light source with similar photon energy. In addition, changes in the spectra induced by vacuum space-charge effects due to both the extreme ultraviolet probe- and near-infrared pump-pulses are studied by analyzing the resulting spectral distortions. The combination of energy resolution and electron count rate achieved in our setup confirms its suitability for spin-resolved studies of the band structure on ultrashort time scales.

  18. Inverse diffraction for the Atmospheric Imaging Assembly in the Solar Dynamics Observatory

    CERN Document Server

    Torre, Gabriele; Benvenuto, Federico; Massone, Anna Maria; Piana, Michele

    2015-01-01

    The Atmospheric Imaging Assembly in the Solar Dynamics Observatory provides full Sun images every 1 seconds in each of 7 Extreme Ultraviolet passbands. However, for a significant amount of these images, saturation affects their most intense core, preventing scientists from a full exploitation of their physical meaning. In this paper we describe a mathematical and automatic procedure for the recovery of information in the primary saturation region based on a correlation/inversion analysis of the diffraction pattern associated to the telescope observations. Further, we suggest an interpolation-based method for determining the image background that allows the recovery of information also in the region of secondary saturation (blooming).

  19. Measurement of zone plate efficiencies in the extreme ultraviolet and applications to radiation monitors for absolute spectral emission

    Science.gov (United States)

    Seely, John; Holland, Glenn; Bremer, James C.; Zukowski, Tim; Feser, Michael; Feng, Yan; Kjornrattanawanich, Benjawan; Goray, Leonid

    2006-08-01

    The diffraction efficiencies of a Fresnel zone plate (ZP), fabricated by Xradia Inc. using the electron-beam writing technique, were measured using polarized, monochromatic synchrotron radiation in the extreme ultraviolet wavelength range 3.4-22 nm. The ZP had 2 mm diameter, 3330 zones, 150 nm outer zone width, and a 1 mm central occulter. The ZP was supported by a 100 nm thick Si 3N 4 membrane. The diffraction patterns were recorded by CMOS imagers with phosphor coatings and with 5.2 μm or 48 μm pixels. The focused +n orders (n=1-4), the diverging -1 order, and the undiffracted 0 order were observed as functions of wavelength and off-axis tilt angle. Sub-pixel focusing of the +n orders was achieved. The measured efficiency in the +1 order was in the 5% to 30% range with the phase-shift enhanced efficiency occurring at 8.3 nm where the gold bars are partially transmitting. The +2 and higher order efficiencies were much lower than the +1 order efficiency. The efficiencies were constant when the zone plate was tilted by angles up to +/-1° from the incident radiation beam. This work indicates the feasibility and benefits of using zone plates to measure the absolute EUV spectral emissions from solar and laboratory sources: relatively high EUV efficiency in the focused +1 order, good out-of-band rejection resulting from the low higher-order efficiencies and the ZP focusing properties, insensitivity to (unfocused) visible light scattered by the ZP, flat response with off-axis angle, and insensitivity to the polarization of the radiation based on the ZP circular symmetry. EUV sensors with Fresnel zone plates potentially have many advantages over existing sensors intended to accurately measure absolute EUV emission levels, such as those implemented on the GOES N-P satellites that use transmission gratings which have off-axis sensitivity variations and poor out-of-band EUV and visible light rejection, and other solar and laboratory sensors using reflection gratings which

  20. SHIELD: Distance Estimates from Hubble Space Telescope Imaging

    Science.gov (United States)

    Cave, Ian; Cannon, J. M.; Larson, E.; Marshall, M.; Moody, S.; Adams, E. A.; Dolphin, A. E.; Elson, E. C.; Giovanelli, R.; Haynes, M. P.; McQuinn, K. B.; Ott, J.; Saintonge, A.; Salzer, J. J.; Skillman, E. D.

    2013-01-01

    The Survey of HI in Extremely Low-mass Dwarfs (SHIELD) is an ongoing study of twelve galaxies with HI masses between 106 and 107 Solar masses, detected by the Arecibo Legacy Fast ALFA (ALFALFA) survey. Here we present new Hubble Space Telescope (HST) imaging of the SHIELD galaxies. The primary goal is to determine the distance of each galaxy. We apply two techniques to measure the apparent magnitude of the tip of the red giant branch (TRGB) feature in the HST color magnitude diagrams. First, a custom designed edge detection filter was written to determine the TRGB magnitude based on a user-selected region of the color magnitude diagram. Second, we apply the maximum likelihood technique implemented in the "TRGBtool" software package (Makarov et al. 2006). In addition to the distances based on the TRGB feature, we also use the MATCH software (Dolphin 2002) to determine the best-fit distance based on the overall CMD morphology. We compare these distance estimates for all members of the SHIELD galaxies, and present a final table of distances that is used in each of the companion SHIELD presentations.

  1. Representations and image classification methods for Cherenkov telescopes

    CERN Document Server

    Malagón, C; Parcerisa, D S; Nieto, D

    2008-01-01

    The problem of identifying gamma ray events out of charged cosmic ray background (so called hadrons) in Cherenkov telescopes is one of the key problems in VHE gamma ray astronomy. In this contribution, we present a novel approach to this problem by implementing different classifiers relying on the information of each pixel of the camera of a Cherenkov telescope.

  2. Mask characterization for critical dimension uniformity budget breakdown in advanced extreme ultraviolet lithography

    Science.gov (United States)

    Nikolsky, Peter; Strolenberg, Chris; Nielsen, Rasmus; Nooitgedacht, Tjitte; Davydova, Natalia; Yang, Greg; Lee, Shawn; Park, Chang-Min; Kim, Insung; Yeo, Jeong-Ho

    2013-04-01

    As the International Technology Roadmap for Semiconductors critical dimension uniformity (CDU) specification shrinks, semiconductor companies need to maintain a high yield of good wafers per day and high performance (and hence market value) of finished products. This cannot be achieved without continuous analysis and improvement of on-product CDU as one of the main drivers for process control and optimization with better understanding of main contributors from the litho cluster: mask, process, metrology and scanner. We will demonstrate a study of mask CDU characterization and its impact on CDU Budget Breakdown (CDU BB) performed for advanced extreme ultraviolet (EUV) lithography with 1D (dense lines) and 2D (dense contacts) feature cases. We will show that this CDU contributor is one of the main differentiators between well-known ArFi and new EUV CDU budgeting principles. We found that reticle contribution to intrafield CDU should be characterized in a specific way: mask absorber thickness fingerprints play a role comparable with reticle CDU in the total reticle part of the CDU budget. Wafer CD fingerprints, introduced by this contributor, may or may not compensate variations of mask CDs and hence influence on total mask impact on intrafield CDU at the wafer level. This will be shown on 1D and 2D feature examples. Mask stack reflectivity variations should also be taken into account: these fingerprints have visible impact on intrafield CDs at the wafer level and should be considered as another contributor to the reticle part of EUV CDU budget. We also observed mask error enhancement factor (MEEF) through field fingerprints in the studied EUV cases. Variations of MEEF may play a role towards the total intrafield CDU and may need to be taken into account for EUV lithography. We characterized MEEF-through-field for the reviewed features, with results herein, but further analysis of this phenomenon is required. This comprehensive approach to quantifying the mask part of

  3. Sensitivity enhancement of chemically amplified resists and performance study using extreme ultraviolet interference lithography

    Science.gov (United States)

    Buitrago, Elizabeth; Nagahara, Seiji; Yildirim, Oktay; Nakagawa, Hisashi; Tagawa, Seiichi; Meeuwissen, Marieke; Nagai, Tomoki; Naruoka, Takehiko; Verspaget, Coen; Hoefnagels, Rik; Rispens, Gijsbert; Shiraishi, Gosuke; Terashita, Yuichi; Minekawa, Yukie; Yoshihara, Kosuke; Oshima, Akihiro; Vockenhuber, Michaela; Ekinci, Yasin

    2016-07-01

    Extreme ultraviolet lithography (EUVL, λ=13.5 nm) is the most promising candidate to manufacture electronic devices for future technology nodes in the semiconductor industry. Nonetheless, EUVL still faces many technological challenges as it moves toward high-volume manufacturing (HVM). A key bottleneck from the tool design and performance point of view has been the development of an efficient, high-power EUV light source for high throughput production. Consequently, there has been extensive research on different methodologies to enhance EUV resist sensitivity. Resist performance is measured in terms of its ultimate printing resolution, line width roughness (LWR), sensitivity [S or best energy (BE)], and exposure latitude (EL). However, there are well-known fundamental trade-off relationships (line width roughness, resolution and sensitivity trade-off) among these parameters for chemically amplified resists (CARs). We present early proof-of-principle results for a multiexposure lithography process that has the potential for high sensitivity enhancement without compromising other important performance characteristics by the use of a "Photosensitized Chemically Amplified Resist™" (PSCAR™). With this method, we seek to increase the sensitivity by combining a first EUV pattern exposure with a second UV-flood exposure (λ=365 nm) and the use of a PSCAR. In addition, we have evaluated over 50 different state-of-the-art EUV CARs. Among these, we have identified several promising candidates that simultaneously meet sensitivity, LWR, and EL high-performance requirements with the aim of resolving line space (L/S) features for the 7- and 5-nm logic node [16- and 13-nm half-pitch (HP), respectively] for HVM. Several CARs were additionally found to be well resolved down to 12- and 11-nm HP with minimal pattern collapse and bridging, a remarkable feat for CARs. Finally, the performance of two negative tone state-of-the-art alternative resist platforms previously investigated

  4. Studies of extreme ultraviolet emission from laser produced plasmas, as sources for next generation lithography

    Science.gov (United States)

    Cummins, Thomas

    The work presented in this thesis is primarily concerned with the optimisation of extreme ultraviolet (EUV) photoemission around 13.5 nm, from laser produced tin (Sn) plasmas. EUV lithography has been identified as the leading next generation technology to take over from the current optical lithography systems, due to its potential of printing smaller feature sizes on integrated circuits. Many of the problems hindering the implementation of EUV lithography for high volume manufacturing have been overcome during the past 20 years of development. However, the lack of source power is a major concern for realising EUV lithography and remains a major roadblock that must be overcome. Therefore in order to optimise and improve the EUV emission from Sn laser plasma sources, many parameters contributing to the make-up of an EUV source are investigated. Chapter 3 presents the results of varying several different experimental parameters on the EUV emission from Sn laser plasmas. Several of the laser parameters including the energy, gas mixture, focusing lens position and angle of incidence are changed, while their effect on the EUV emission is studied. Double laser pulse experiments are also carried out by creating plasma targets for the main laser pulse to interact with. The resulting emission is compared to that of a single laser pulse on solid Sn. Chapter 4 investigates tailoring the CO2 laser pulse duration to improve the efficiency of an EUV source set-up. In doing so a new technique for shortening the time duration of the pulse is described. The direct effects of shortening the CO2 laser pulse duration on the EUV emission from Sn are then studied and shown to improve the efficiency of the source. In Chapter 5 a new plasma target type is studied and compared to the previous dual laser experiments. Laser produced colliding plasma jet targets form a new plasma layer, with densities that can be optimised for re-heating with the main CO2 laser pulse. Chapter 6 will present

  5. Newton's Telescope in Print: the Role of Images in the Reception of Newton's Instrument

    NARCIS (Netherlands)

    Dupré, Sven

    2008-01-01

    While Newton tried to make his telescope into a proof of the supremacy of his theory of colours over older theories, his instrument was welcomed as a way to shorten telescopes, not as a way to solve the problem of chromatic aberration. This paper argues that the image published together with the rep

  6. Distance determinations to shield galaxies from Hubble space telescope imaging

    Energy Technology Data Exchange (ETDEWEB)

    McQuinn, Kristen B. W.; Skillman, Evan D. [Minnesota Institute for Astrophysics, School of Physics and Astronomy, University of Minnesota, 116 Church Street, S.E., Minneapolis, MN 55455 (United States); Cannon, John M.; Cave, Ian [Department of Physics and Astronomy, Macalester College, 1600 Grand Avenue, Saint Paul, MN 55105 (United States); Dolphin, Andrew E. [Raytheon Company, 1151 E. Hermans Road, Tucson, AZ 85756 (United States); Salzer, John J. [Department of Astronomy, Indiana University, 727 East 3rd Street, Bloomington, IN 47405 (United States); Haynes, Martha P.; Adams, Elizabeth; Giovanelli, Riccardo [Center for Radiophysics and Space Research, Space Sciences Building, Cornell University, Ithaca, NY 14853 (United States); Elson, Ed C. [Astrophysics, Cosmology and Gravity Centre (ACGC), Department of Astronomy, University of Cape Town, Private Bag X3, Rondebosch 7701 (South Africa); Ott, Juërgen [National Radio Astronomy Observatory, P.O. Box O, 1003 Lopezville Road, Socorro, NM 87801 (United States); Saintonge, Amélie, E-mail: kmcquinn@astro.umn.edu [Max-Planck-Institute for Astrophysics, D-85741 Garching (Germany)

    2014-04-10

    The Survey of H I in Extremely Low-mass Dwarf (SHIELD) galaxies is an ongoing multi-wavelength program to characterize the gas, star formation, and evolution in gas-rich, very low-mass galaxies. The galaxies were selected from the first ∼10% of the H I Arecibo Legacy Fast ALFA (ALFALFA) survey based on their inferred low H I mass and low baryonic mass, and all systems have recent star formation. Thus, the SHIELD sample probes the faint end of the galaxy luminosity function for star-forming galaxies. Here, we measure the distances to the 12 SHIELD galaxies to be between 5 and 12 Mpc by applying the tip of the red giant method to the resolved stellar populations imaged by the Hubble Space Telescope. Based on these distances, the H I masses in the sample range from 4 × 10{sup 6} to 6 × 10{sup 7} M {sub ☉}, with a median H I mass of 1 × 10{sup 7} M {sub ☉}. The tip of the red giant branch distances are up to 73% farther than flow-model estimates in the ALFALFA catalog. Because of the relatively large uncertainties of flow-model distances, we are biased toward selecting galaxies from the ALFALFA catalog where the flow model underestimates the true distances. The measured distances allow for an assessment of the native environments around the sample members. Five of the galaxies are part of the NGC 672 and NGC 784 groups, which together constitute a single structure. One galaxy is part of a larger linear ensemble of nine systems that stretches 1.6 Mpc from end to end. Three galaxies reside in regions with 1-9 neighbors, and four galaxies are truly isolated with no known system identified within a radius of 1 Mpc.

  7. Spartan Infrared Camera, a High-Resolution Imager for the SOAR Telescope: Design, Tests, and On-Telescope Performance

    Science.gov (United States)

    Loh, Edwin D.; Biel, Jason D.; Davis, Michael W.; Laporte, René; Loh, Owen Y.; Verhanovitz, Nathan J.

    2012-04-01

    The Spartan Infrared Camera provides tip-tilt corrected imaging for the SOAR Telescope in the 900-2500 nm spectral range with four 2048 × 2048 HAWAII-2 detectors. The camera has two plate scales: high-resolution () for future diffraction-limited sampling in the H and K bands and wide-field () to cover a 5‧ × 5‧ field, over which tip-tilt correction is substantial. The design is described in detail. Except for CaF2 field-flattening lenses, the optics are aluminum mirrors to thermally match the aluminum cryogenic-optical box in which the optics mount. The design minimizes the tilt of the optics as the instrument rotates on the Nasmyth port of the telescope. Two components of the gravitational torque on an optic are eliminated by symmetry, and the third component is minimized by balancing the optic. The optics (including the off-axis aspherical mirrors) were aligned with precise metrology. For the detector assembly, Henein pivots are used to provide frictionless, thermally compliant, lubricant-free, and thermally conducting rotation of the detectors. The heat load is 14 W for an ambient temperature of 10°C. Cooling down takes 40 hr. An activated-charcoal getter controls permeation through the large Viton O-ring for at least nine months. We present maps of the image distortion, which amount to tens of pixels at the greatest. The wavelength of the narrowband filters shift with position in the sky. The measured Strehl ratio of the camera itself is 0.81-0.84 at λ1650 nm. The width of the best K-band image was 260 mas in unexceptional seeing measured after tuning the telescope and before moving the telescope. Since images are normally taken after pointing the telescope to a different field, this supports the idea that the image quality could be improved by better control of the focus and the shape of the primary mirror. The instrument has proved to be capable of producing images that can be stitched together to measure faint, extended features and to produce

  8. Gemini Planet Imager integration to the Gemini South telescope software environment

    CERN Document Server

    Rantakyrö, Fredrik T; Chilcote, Jeffrey; Dunn, Jennifer; Goodsell, Stephen; Hibon, Pascale; Macintosh, Bruce; Quiroz, Carlos; Perrin, Marshall D; Sadakuni, Naru; Saddlemyer, Leslie; Savransky, Dmitry; Serio, Andrew; Winge, Claudia; Galvez, Ramon; Gausachs, Gaston; Hardie, Kayla; Hartung, Markus; Luhrs, Javier; Poyneer, Lisa; Thomas, Sandrine

    2014-01-01

    The Gemini Planet Imager is an extreme AO instrument with an integral field spectrograph (IFS) operating in Y, J, H, and K bands. Both the Gemini telescope and the GPI instrument are very complex systems. Our goal is that the combined telescope and instrument system may be run by one observer operating the instrument, and one operator controlling the telescope and the acquisition of light to the instrument. This requires a smooth integration between the two systems and easily operated control interfaces. We discuss the definition of the software and hardware interfaces, their implementation and testing, and the integration of the instrument with the telescope environment.

  9. The Laser-assisted photoelectric effect of He, Ne, Ar and Xe in intense extreme ultraviolet and infrared laser fields

    Science.gov (United States)

    Hayden, P.; Dardis, J.; Hough, P.; Richardson, V.; Kennedy, E. T.; Costello, J. T.; Düsterer, S.; Redlin, H.; Feldhaus, J.; Li, W. B.; Cubaynes, D.; Meyer, M.

    2016-02-01

    In this paper, we report results on two-colour above-threshold ionisation, where extreme ultraviolet pulses of femtosecond duration were synchronised to intense infrared laser pulses of picosecond duration, in order to study the laser-assisted photoelectric effect of atomic helium, neon, krypton and xenon which leads to the appearance of characteristic sidebands in the photoelectron spectra. The observed trends are found to be well described by a simple model based on the soft-photon approximation, at least for the relatively low optical intensities of up to ? employed in these early experiments.

  10. Spatio-temporal coherence of free-electron laser radiation in the extreme ultraviolet determined by a Michelson interferometer

    Science.gov (United States)

    Hilbert, V.; Rödel, C.; Brenner, G.; Döppner, T.; Düsterer, S.; Dziarzhytski, S.; Fletcher, L.; Förster, E.; Glenzer, S. H.; Harmand, M.; Hartley, N. J.; Kazak, L.; Komar, D.; Laarmann, T.; Lee, H. J.; Ma, T.; Nakatsutsumi, M.; Przystawik, A.; Redlin, H.; Skruszewicz, S.; Sperling, P.; Tiggesbäumker, J.; Toleikis, S.; Zastrau, U.

    2014-09-01

    A key feature of extreme ultraviolet (XUV) radiation from free-electron lasers (FELs) is its spatial and temporal coherence. We measured the spatio-temporal coherence properties of monochromatized FEL pulses at 13.5 nm using a Michelson interferometer. A temporal coherence time of (59±8) fs has been determined, which is in good agreement with the spectral bandwidth given by the monochromator. Moreover, the spatial coherence in vertical direction amounts to about 15% of the beam diameter and about 12% in horizontal direction. The feasibility of measuring spatio-temporal coherence properties of XUV FEL radiation using interferometric techniques advances machine operation and experimental studies significantly.

  11. Spatio-temporal coherence of free-electron laser radiation in the extreme ultraviolet determined by a Michelson interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Hilbert, V.; Rödel, C.; Zastrau, U., E-mail: ulf.zastrau@uni-jena.de [Institut für Optik und Quantenelektronik, Friedrich-Schiller-Universität, Max-Wien-Platz 1, 07743 Jena (Germany); Brenner, G.; Düsterer, S.; Dziarzhytski, S.; Harmand, M.; Przystawik, A.; Redlin, H.; Toleikis, S. [Deutsches Elektronen-Synchrotron DESY, Notkestrasse 85, 22607 Hamburg (Germany); Döppner, T.; Ma, T. [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94550 (United States); Fletcher, L. [Department of Physics, University of California, Berkeley, California 94720 (United States); Förster, E. [Institut für Optik und Quantenelektronik, Friedrich-Schiller-Universität, Max-Wien-Platz 1, 07743 Jena (Germany); Helmholtz-Institut Jena, Fröbelstieg 3, 07743 Jena (Germany); Glenzer, S. H.; Lee, H. J. [SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California 94025 (United States); Hartley, N. J. [Department of Physics, Clarendon Laboratory, University of Oxford, Parks Road, Oxford OX1 3PU (United Kingdom); Kazak, L.; Komar, D.; Skruszewicz, S. [Institut für Physik, Universität Rostock, 18051 Rostock (Germany); and others

    2014-09-08

    A key feature of extreme ultraviolet (XUV) radiation from free-electron lasers (FELs) is its spatial and temporal coherence. We measured the spatio-temporal coherence properties of monochromatized FEL pulses at 13.5 nm using a Michelson interferometer. A temporal coherence time of (59±8) fs has been determined, which is in good agreement with the spectral bandwidth given by the monochromator. Moreover, the spatial coherence in vertical direction amounts to about 15% of the beam diameter and about 12% in horizontal direction. The feasibility of measuring spatio-temporal coherence properties of XUV FEL radiation using interferometric techniques advances machine operation and experimental studies significantly.

  12. Spectral-phase interferometry for direct electric-field reconstruction applied to seeded extreme-ultraviolet free-electron lasers

    CERN Document Server

    Mahieu, Benoît; De Ninno, Giovanni; Dacasa, Hugo; Lozano, Magali; Rousseau, Jean-Philippe; Zeitoun, Philippe; Garzella, David; Merdji, Hamed

    2015-01-01

    We present a setup for complete characterization of femtosecond pulses generated by seeded free-electron lasers (FEL's) in the extreme-ultraviolet spectral region. Two delayed and spectrally shifted replicas are produced and used for spectral phase interferometry for direct electric field reconstruction (SPIDER). We show that it can be achieved by a simple arrangement of the seed laser. Temporal shape and phase obtained in FEL simulations are well retrieved by the SPIDER reconstruction, allowing to foresee the implementation of this diagnostic on existing and future sources. This will be a significant step towards an experimental investigation and control of FEL spectral phase.

  13. US Participation in the Solar Orbiter Multi Element Telescope for Imaging and Spectroscopy (METIS) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Multi Element Telescope for Imaging and Spectroscopy, METIS, investigation has been conceived to perform off-limb and near-Sun coronagraphy and is motivated by...

  14. Single-Grid-Pair Fourier Telescope for Imaging in Hard-X Rays and gamma Rays

    Science.gov (United States)

    Campbell, Jonathan

    2008-01-01

    This instrument, a proposed Fourier telescope for imaging in hard-x rays and gamma rays, would contain only one pair of grids made of an appropriate radiation-absorpting/ scattering material, in contradistinction to multiple pairs of such as grids in prior Fourier x- and gamma-ray telescopes. This instrument would also include a relatively coarse gridlike image detector appropriate to the radiant flux to be imaged. Notwithstanding the smaller number of grids and the relative coarseness of the imaging detector, the images produced by the proposed instrument would be of higher quality.

  15. Imaging extrasolar planets with the European Extremely Large Telescope

    Directory of Open Access Journals (Sweden)

    Jolissaint L.

    2011-07-01

    Full Text Available The European Extremely Large Telescope (E-ELT is the most ambitious of the ELTs being planned. With a diameter of 42 m and being fully adaptive from the start, the E-ELT will be more than one hundred times more sensitive than the present-day largest optical telescopes. Discovering and characterising planets around other stars will be one of the most important aspects of the E-ELT science programme. We model an extreme adaptive optics instrument on the E-ELT. The resulting contrast curves translate to the detectability of exoplanets.

  16. Cameras a Million Miles Apart: Stereoscopic Imaging Potential with the Hubble and James Webb Space Telescopes

    CERN Document Server

    Green, Joel D; Stansberry, John A; Meinke, Bonnie

    2016-01-01

    The two most powerful optical/IR telescopes in history -- NASA's Hubble and James Webb Space Telescopes -- will be in space at the same time. We have a unique opportunity to leverage the 1.5 million kilometer separation between the two telescopic nodal points to obtain simultaneously captured stereoscopic images of asteroids, comets, moons and planets in our Solar System. Given the recent resurgence in stereo-3D movies and the recent emergence of VR-enabled mobile devices, these stereoscopic images provide a unique opportunity to engage the public with unprecedented views of various Solar System objects. Here, we present the technical requirements for acquiring stereoscopic images of Solar System objects, given the constraints of the telescopic equipment and the orbits of the target objects, and we present a handful of examples.

  17. Wavefront measurement of single-mode quantum cascade laser beam for seed application in laser-produced plasma extreme ultraviolet system.

    Science.gov (United States)

    Nowak, Krzysztof M; Ohta, Takeshi; Suganuma, Takashi; Yokotsuka, Toshio; Fujimoto, Junichi; Mizoguchi, Hakaru

    2012-12-01

    Quantum cascade laser (QCL) is a very attractive seed source for a multikilowatt pulsed CO2 lasers applied for driving extreme ultraviolet emitting plasmas. In this Letter, we investigate output beam properties of a QCL designed to address P18 and P20 lines of 10.6 micron band of CO2 molecule. In particular, output beam quality and stability are investigated for the first time. A well-defined linear polarization and a single-mode operation enabled a use of phase retrieval method for full description of QCL output beam. A direct, multi-image numerical phase retrieval technique was developed and successfully applied to the measured intensity patterns of a QCL beam. Very good agreement between the measured and reconstructed beam profiles was observed at distances ranging from QCL aperture to infinity, proving a good understanding of the beam propagation. The results also confirm a high spatial coherence and high stability of the beam parameters, the features expected from an excellent seed source.

  18. FAST EXTREME-ULTRAVIOLET DIMMING ASSOCIATED WITH A CORONAL JET SEEN IN MULTI-WAVELENGTH AND STEREOSCOPIC OBSERVATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K.-S.; Moon, Y.-J.; Lee, Jin-Yi [Department of Astronomy and Space Science, Kyung Hee University, Yongin 446-701 (Korea, Republic of); Innes, D. E. [Max Plank Institute for Solar System Research, D-37191 Katlenburg-Lindau (Germany); Shibata, K. [Kwasan and Hida Observatories, Kyoto University, Yamashina, Kyoto 607-8471 (Japan); Park, Y.-D., E-mail: lksun@khu.ac.kr [Solar and Space Weather Research Group, Korea Astronomy and Space Science Institute, Daejeon 305-348 (Korea, Republic of)

    2013-03-20

    We have investigated a coronal jet observed near the limb on 2010 June 27 by the Hinode/X-Ray Telescope (XRT), EUV Imaging Spectrograph (EIS), and Solar Optical Telescope (SOT), and by the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA), and on the disk by STEREO-A/EUVI. From EUV (AIA and EIS) and soft X-ray (XRT) images we have identified both cool and hot jets. There was a small loop eruption seen in Ca II images of the SOT before the jet eruption. We found that the hot jet preceded its associated cool jet by about 2 minutes. The cool jet showed helical-like structures during the rising period which was supported by the spectroscopic analysis of the jet's emission. The STEREO observation, which enabled us to observe the jet projected against the disk, showed dimming at 195 A along a large loop connected to the jet. We measured a propagation speed of {approx}800 km s{sup -1} for the dimming front. This is comparable to the Alfven speed in the loop computed from a magnetic field extrapolation of the photospheric field measured five days earlier by the SDO/Helioseismic and Magnetic Imager, and the loop densities obtained from EIS Fe XIV {lambda}264.79/274.20 line ratios. We interpret the dimming as indicating the presence of Alfvenic waves initiated by reconnection in the upper chromosphere.

  19. Novel optical designs for consumer astronomical telescopes and their application to professional imaging

    Science.gov (United States)

    Wise, Peter; Hodgson, Alan

    2006-06-01

    Since the launch of the Hubble Space Telescope there has been widespread popular interest in astronomy. A further series of events, most notably the recent Deep Impact mission and Mars oppositions have served to fuel further interest. As a result more and more amateurs are coming into astronomy as a practical hobby. At the same time more sophisticated optical equipment is becoming available as the price to performance ratio become more favourable. As a result larger and better optical telescopes are now in use by amateurs. We also have the explosive growth in digital imaging technologies. In addition to displacing photographic film as the preferred image capture modality it has made the capture of high quality astronomical imagery more accessible to a wider segment of the astronomy community. However, this customer requirement has also had an impact on telescope design. There has become a greater imperative for wide flat image fields in these telescopes to take advantage of the ongoing advances in CCD imaging technology. As a result of these market drivers designers of consumer astronomical telescopes are now producing state of the art designs that result in wide, flat fields with optimal spatial and chromatic aberrations. Whilst some of these designs are not scalable to the larger apertures required for professional ground and airborne telescope use there are some that are eminently suited to make this transition.

  20. FACT: Towards Robotic Operation of an Imaging Air Cherenkov Telescope

    CERN Document Server

    Biland, A; Backes, M; Boccone, V; Braun, I; Bretz, T; Buss, J; Cadoux, F; Commichau, V; Djambazov, L; Dorner, D; Einecke, S; Eisenacher, D; Gendotti, A; Grimm, O; von Gunten, H; Haller, C; Hildebrand, D; Horisberger, U; Huber, B; Kim, K -S; Knoetig, M L; Koehne, J -H; Kraehenbuehl, T; Krumm, B; Lee, M; Lorenz, E; Lustermann, W; Lyard, E; Mannheim, K; Meharga, M; Meier, K; Montaruli, T; Neise, D; Nessi-Tedaldi, F; Overkemping, A -K; Paravac, A; Pauss, F; Renker, D; Rhode, W; Ribordy, M; Roeser, U; Stucki, J -P; Schneider, J; Steinbring, T; Temme, F; Thaele, J; Tobler, S; Viertel, G; Vogler, P; Walter, R; Warda, K; Weitzel, Q; Zaenglein, M

    2013-01-01

    The First G-APD Cherenkov Telescope (FACT) became operational at La Palma in October 2011. Since summer 2012, due to very smooth and stable operation, it is the first telescope of its kind that is routinely operated from remote, without the need for a data-taking crew on site. In addition, many standard tasks of operation are executed automatically without the need for manual interaction. Based on the experience gained so far, some alterations to improve the safety of the system are under development to allow robotic operation in the future. We present the setup and precautions used to implement remote operations and the experience gained so far, as well as the work towards robotic operation.

  1. Simulation of the imaging quality of ground-based telescopes affected by atmospheric disturbances

    Science.gov (United States)

    Ren, Yubin; Kou, Songfeng; Gu, Bozhong

    2014-08-01

    Ground-based telescope imaging model is developed in this paper, the relationship between the atmospheric disturbances and the ground-based telescope image quality is studied. Simulation of the wave-front distortions caused by atmospheric turbulences has long been an important method in the study of the propagation of light through the atmosphere. The phase of the starlight wave-front is changed over time, but in an appropriate short exposure time, the atmospheric disturbances can be considered as "frozen". In accordance with Kolmogorov turbulence theory, simulating atmospheric disturbances of image model based on the phase screen distorted by atmospheric turbulences is achieved by the fast Fourier transform (FFT). Geiger mode avalanche photodiode array (APD arrays) model is used for atmospheric wave-front detection, the image is achieved by inversion method of photon counting after the target starlight goes through phase screens and ground-based telescopes. Ground-based telescope imaging model is established in this paper can accurately achieve the relationship between the quality of telescope imaging and monolayer or multilayer atmosphere disturbances, and it is great significance for the wave-front detection and optical correction in a Multi-conjugate Adaptive Optics system (MCAO).

  2. Stokes imaging polarimetry using image restoration at the Swedish 1-m Solar Telescope

    CERN Document Server

    van Noort, M J

    2008-01-01

    Aims: We aim to achieve high spatial resolution as well as high polarimetric sensitivity, using an earth-based 1m-class solar telescope, for the study of magnetic fine structure on the Sun. Methods: We use a setup with 3 high-speed, low-noise cameras to construct datasets with interleaved polarimetric states, particularly suitable for Multi-Object Multi-Frame Blind Deconvolution image restorations. We discuss the polarimetric calibration routine as well as various potential sources of error in the results. Results: We obtained near diffraction limited images, with a noise level of approximately 10^(-3) I(cont). We confirm that dark-cores have a weaker magnetic field and at a lower inclination angle with respect to the solar surface than the edges of the penumbral filament. We show that the magnetic field strength in faculae-striations is significantly lower than in other nearby parts of the faculae.

  3. The image camera of the 17 m diameter air Cherenkov telescope MAGIC

    CERN Document Server

    Ostankov, A P

    2001-01-01

    The image camera of the 17 m diameter MAGIC telescope, an air Cherenkov telescope currently under construction to be installed at the Canary island La Palma, is described. The main goal of the experiment is to cover the unexplored energy window from approx 10 to approx 300 GeV in gamma-ray astrophysics. In its first phase with a classical PMT camera the MAGIC telescope is expected to reach an energy threshold of approx 30 GeV. The operational conditions, the special characteristics of the developed PMTs and their use with light concentrators, the fast signal transfer scheme using analog optical links, the trigger and DAQ organization as well as image reconstruction strategy are described. The different paths being explored towards future camera improvements, in particular the constraints in using silicon avalanche photodiodes and GaAsP hybrid photodetectors in air Cherenkov telescopes are discussed.

  4. Simulation of Astronomical Images from Optical Survey Telescopes using a Comprehensive Photon Monte Carlo Approach

    CERN Document Server

    Peterson, J R; Kahn, S M; Rasmussen, A P; Peng, E; Ahmad, Z; Bankert, J; Chang, C; Claver, C; Gilmore, D K; Grace, E; Hannel, M; Hodge, M; Lorenz, S; Lupu, A; Meert, A; Nagarajan, S; Todd, N; Winans, A; Young, M

    2015-01-01

    We present a comprehensive methodology for the simulation of astronomical images from optical survey telescopes. We use a photon Monte Carlo approach to construct images by sampling photons from models of astronomical source populations, and then simulating those photons through the system as they interact with the atmosphere, telescope, and camera. We demonstrate that all physical effects for optical light that determine the shapes, locations, and brightnesses of individual stars and galaxies can be accurately represented in this formalism. By using large scale grid computing, modern processors, and an efficient implementation that can produce 400,000 photons/second, we demonstrate that even very large optical surveys can be now be simulated. We demonstrate that we are able to: 1) construct kilometer scale phase screens necessary for wide-field telescopes, 2) reproduce atmospheric point-spread-function moments using a fast novel hybrid geometric/Fourier technique for non-diffraction limited telescopes, 3) ac...

  5. The optical reflector system for the CANGAROO-II imaging atmospheric Cherenkov telescope

    CERN Document Server

    Kawachi, A; Jimbo, J; Kamei, S; Kifune, T; Kubo, H; Kushida, J; Le Bohec, S; Miyawaki, K; Mori, M; Nishijima, K; Patterson, J R; Suzuki, R; Tanimori, T; Yanagita, S; Yoshikoshi, T; Yuki, A

    2001-01-01

    A new imaging atmospheric Cherenkov telescope (CANGAROO-II) with a light-weight reflector has been constructed. Light, robust, and durable mirror facets of containing CFRP (Carbon Fiber Reinforced Plastic) laminates were developed for the telescope. The attitude of each facet can be adjusted by stepping motors. In this paper, we describe the design, manufacturing, alignment procedure, and the performance of the CANGAROO-II optical reflector system.

  6. The Development of the Detector and Imaging Systems of the Masco Telescope

    Science.gov (United States)

    Damico, Flavio

    1997-08-01

    In this thesis the detector and imaging systems of the MASCO telescope are described. MASCO is a gamma-ray imaging telescope with both high angular resolution and sensitivity. Conceived to be able to individually study sources in crowded fields, MASCO is an ideal mission to map sky regions like the Galactic Center. A revision of recent observational results obtained with imaging telescopes of this particular region is presented. Also presented is the sensitivity of the telescope for pulsed gamma-ray sources, taking GX 1+4 as an example. MASCO employs the coded-aperture imaging technique, and will be the first telescope to use a new type of mask patterns, the modified uniformly redundant arrays (MURAs). The coded-aperture imaging technique is reviewed and interesting properties of the MURAs discussed. This work gives two original contributions for MURA based coded mask telescopes: an empirical rule that says which MURA pattern is convenient to build a mask when we want to make observations with the mask-antimask method and the definition of the rotation center of a MURA pattern. MASCO uses a large number of scintillation detectors. The main detector of the experiment is a 41 cm diameter and 5 cm thick inorganic NaI(Tl) scintillation detector in an Anger Camera configuration, with approximately 10% energy resolution in 662 keV. Organic scintillation detectors are used to minimize the telescope background. and large volume scintillation detectors were built for the first time in Brazil. MASCO uses 12 of these scintillation detectors and the fabrication process are discussed together with tests for 2 different types of these detectors. MASCO shall have an angular resolution of 14 min in a 14 deg field-of-view and 20 micro-s of temporal resolution. A simulated image of the Galactic Center region in the 50-150 keV energy band is presented in order to show the imaging capabilities of the telescope. Preliminary tests results obtained with the detector and imaging systems

  7. Extended-range grazing-incidence spectrometer for high-resolution extreme ultraviolet measurements on an electron beam ion trap

    Energy Technology Data Exchange (ETDEWEB)

    Beiersdorfer, P.; Magee, E. W.; Brown, G. V.; Träbert, E.; Widmann, K. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Hell, N. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Dr. Remeis-Sternwarte and ECAP, Universität Erlangen-Nürnberg, 96049 Bamberg (Germany)

    2014-11-15

    A high-resolution grazing-incidence grating spectrometer has been implemented on the Livermore electron beam ion traps for performing very high-resolution measurements in the soft x-ray and extreme ultraviolet region spanning from below 10 Å to above 300 Å. The instrument operates without an entrance slit and focuses the light emitted by highly charged ions located in the roughly 50 μm wide electron beam onto a cryogenically cooled back-illuminated charge-coupled device detector. The measured line widths are below 0.025 Å above 100 Å, and the resolving power appears to be limited by the source size and Doppler broadening of the trapped ions. Comparisons with spectra obtained with existing grating spectrometers show an order of magnitude improvement in spectral resolution.

  8. Improving attosecond pulse reflection by large angle incidence for a periodic multilayer mirror in the extreme ultraviolet region

    Institute of Scientific and Technical Information of China (English)

    Lin Cheng-You; Chen Shu-Jing; Liu Da-He

    2013-01-01

    The improvement of attosecond pulse reflection by large angle incidence for a periodic multilayer mirror in the extreme ultraviolet region has been discussed.Numerical simulations of both spectral and temporal reflection characteristics of periodic multilayer mirrors under various incident angles have been analyzed and compared.It was found that the periodic multilayer mirror under a larger incidence angle can provide not only higher integrated reflectivity but also a broader reflection band with negligible dispersion,making it possible to obtain better a reflected pulse that has a higher pulse reflection efficiency and shorter pulse duration for attosecond pulse reflection.In addition,by increasing the incident angle,the promotion of attosecond pulse reflection capability has been proven for periodic multilayer mirrors with arbitrary layers.

  9. Extreme ultraviolet solar irradiance during the rising phase of solar cycle 24 observed by PROBA2/LYRA

    Directory of Open Access Journals (Sweden)

    Zender Joe

    2012-08-01

    Full Text Available The Large-Yield Radiometer (LYRA is a radiometer that has monitored the solar irradiance at high cadence and in four pass bands since January 2010. Both the instrument and its spacecraft, PROBA2 (Project for OnBoard Autonomy, have several innovative features for space instrumentation, which makes the data reduction necessary to retrieve the long-term variations of solar irradiance more complex than for a fully optimized solar physics mission. In this paper, we describe how we compute the long-term time series of the two extreme ultraviolet irradiance channels of LYRA and compare the results with those of SDO/EVE. We find that the solar EUV irradiance has increased by a factor of 2 since the last solar minimum (between solar cycles 23 and 24, which agrees reasonably well with the EVE observations.

  10. Tracing molecular dynamics at the femto-/atto-second boundary through extreme-ultraviolet pump-probe spectroscopy

    CERN Document Server

    Carpeggiani, P A; Palacios, A; Gray, D; Martín, F; Charalambidis, D

    2013-01-01

    Coherent light pulses of few to hundreds of femtoseconds (fs) duration have prolifically served the field of ultrafast phenomena. While fs pulses address mainly dynamics of nuclear motion in molecules or lattices in the gas, liquid or condensed matter phase, the advent of attosecond pulses has in recent years provided direct experimental access to ultrafast electron dynamics. However, there are processes involving nuclear motion in molecules and in particular coupled electronic and nuclear motion that possess few fs or even sub-fs dynamics. In the present work we have succeeded in addressing simultaneously vibrational and electronic dynamics in molecular Hydrogen. Utilizing a broadband extreme-ultraviolet (XUV) continuum the entire, Frank-Condon allowed spectrum of H2 is coherently excited. Vibrational, electronic and ionization 1fs scale dynamics are subsequently tracked by means of XUV-pump-XUV-probe measurements. These reflect the intrinsic molecular behavior as the XUV probe pulse hardly distorts the mole...

  11. Direct generation of intense extreme ultraviolet supercontinuum with chirped 11-mJ pulses from a femtosecond laser amplifier

    CERN Document Server

    Zeng, Bin; Li, Guihua; Yao, Jinping; Ni, Jielei; Zhang, Haisu; Cheng, Ya; Xu, Zhizhan

    2011-01-01

    We report on the generation of intense extreme ultraviolet (EUV) supercontinuum with photon energies spanning from 35 eV to 50 eV (i. e., supporting an isolated attosecond pulse with a duration of ~271 as) by loosely focusing 11-mJ chirped pulses from a femtosecond laser amplifier into a 10-mm long gas cell filled with krypton gas. We observe that when high-order harmonics are generated with transformed-limited ~35 fs pulses, only discrete harmonics can be produced; whereas for negatively chirped 188 fs pulses, EUV supercontinuum can be observed in single-shot harmonic spectrum. The dramatic change of spectral and temporal properties of the driver pulses after passing through the gas cell indicates that propagation effects play a significant role in promoting the generation of the EUV supercontinuum.

  12. X-Ray and Extreme Ultraviolet Emission from Small-Sized Kr Clusters Irradiated by 150-fs Laser Pulses

    Institute of Scientific and Technical Information of China (English)

    王骐; 程元丽; 赵永蓬; 夏元钦; 陈建新; 肖亦凡

    2003-01-01

    x-ray and extreme ultraviolet (EUV) emission from Kr clusters irradiated by 150-fs laser pulses at the peak laser intensity of 5×1015W/cm2 was experimentally investigated. Strong transitions (10nm-13nm) from Kr X and Kr 1X were observed and some spectral lines from Kr ⅩⅢ and Kr ⅩⅣ, which have been predicted to be not produced by optical-field-ionization at the laser intensity used, also appeared. The laser energy absorption and the intensity of x-ray emission started to grow remarkably above the backing pressure of 0.5 MPa and to decrease at the backing pressure of 3 MPa. It is suggested that an optimum backing pressure may exist for Kr clusters heated by 150 fs laser pulses at a certain laser intensity to produce x-ray emission.

  13. Evaluation of resist sensitivity in extreme ultraviolet/soft x-ray region for next-generation lithography

    Directory of Open Access Journals (Sweden)

    Tomoko Gowa Oyama

    2011-12-01

    Full Text Available At and below the 11 nm node, shortening the exposure wavelength to >10 nm (extreme ultraviolet (EUV/soft x-ray region, especially at 6.6-6.8 nm, has been discussed as next-generation EUV lithography. In this study, dose/sensitivities of typical resists were obtained at several wavelengths down to 3.1 nm and were found to depend on the wavelength. However, it was confirmed that the absorbed dose, calculated from the dose/sensitivity and the respective linear absorption coefficient, was almost independent of the wavelength and constant for each resist. Thus, the resist sensitivity for next-generation lithography was predicted at wavelengths <10 nm.

  14. Highly sensitive visible-blind extreme ultraviolet Ni/4H-SiC Schottky photodiodes with large detection area.

    Science.gov (United States)

    Hu, Jun; Xin, Xiaobin; Zhao, Jian H; Yan, Feng; Guan, Bing; Seely, John; Kjornrattanawanich, Benjawan

    2006-06-01

    Ni/4H-SiC Schottky photodiodes of 5 mm x 5 mm area have been fabricated and characterized. The photodiodes show less than 0.1 pA dark current at -4 V and an ideality factor of 1.06. A quantum efficiency (QE) between 3 and 400 nm has been calibrated and compared with Si photodiodes optimized for extreme ultraviolet (EUV) detection. In the EUV region, the QE of SiC detectors increases from 0.14 electrons/photon at 120 nm to 30 electrons/photon at 3 nm. The mean energy of electron-hole pair generation of 4H-SiC estimated from the spectral QE is found to be 7.9 eV.

  15. High Resolution Imaging of Satellites with Ground-Based 10-m Astronomical Telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Marois, C

    2007-01-04

    High resolution imaging of artificial satellites can play an important role in current and future space endeavors. One such use is acquiring detailed images that can be used to identify or confirm damage and aid repair plans. It is shown that a 10-m astronomical telescope equipped with an adaptive optics system (AO) to correct for atmospheric turbulence using a natural guide star can acquire high resolution images of satellites in low-orbits using a fast shutter and a near-infrared camera even if the telescope is not capable of tracking satellites. With the telescope pointing towards the satellite projected orbit and less than 30 arcsec away from a guide star, multiple images of the satellite are acquired on the detector using the fast shutter. Images can then be shifted and coadded by post processing to increase the satellite signal to noise ratio. Using the Keck telescope typical Strehl ratio and anisoplanatism angle as well as a simple diffusion/reflection model for a satellite 400 km away observed near Zenith at sunset or sunrise, it is expected that such system will produced > 10{sigma} K-band images at a resolution of 10 cm inside a 60 arcsec diameter field of view. If implemented, such camera could deliver the highest resolution satellite images ever acquired from the ground.

  16. High Resolution Imaging of Satellites with Ground-Based 10-m Astronomical Telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Marois, C

    2007-01-04

    High resolution imaging of artificial satellites can play an important role in current and future space endeavors. One such use is acquiring detailed images that can be used to identify or confirm damage and aid repair plans. It is shown that a 10-m astronomical telescope equipped with an adaptive optics system (AO) to correct for atmospheric turbulence using a natural guide star can acquire high resolution images of satellites in low-orbits using a fast shutter and a near-infrared camera even if the telescope is not capable of tracking satellites. With the telescope pointing towards the satellite projected orbit and less than 30 arcsec away from a guide star, multiple images of the satellite are acquired on the detector using the fast shutter. Images can then be shifted and coadded by post processing to increase the satellite signal to noise ratio. Using the Keck telescope typical Strehl ratio and anisoplanatism angle as well as a simple diffusion/reflection model for a satellite 400 km away observed near Zenith at sunset or sunrise, it is expected that such system will produced > 10{sigma} K-band images at a resolution of 10 cm inside a 60 arcsec diameter field of view. If implemented, such camera could deliver the highest resolution satellite images ever acquired from the ground.

  17. High Resolution Linear Polarimetric Imaging for the Event Horizon Telescope

    CERN Document Server

    Chael, Andrew A; Narayan, Ramesh; Doeleman, Sheperd S; Wardle, John F C; Bouman, Katherine L

    2016-01-01

    Images of the linear polarization of synchrotron radiation around Active Galactic Nuclei (AGN) identify their projected magnetic field lines and provide key data for understanding the physics of accretion and outflow from supermassive black holes. The highest resolution polarimetric images of AGN are produced with Very Long Baseline Interferometry (VLBI). Because VLBI incompletely samples the Fourier transform of the source image, any image reconstruction that fills in unmeasured spatial frequencies will not be unique and reconstruction algorithms are required. In this paper, we explore extensions of the Maximum Entropy Method (MEM) to linear polarimetric VLBI imaging. In contrast to previous work, our polarimetric MEM algorithm combines a Stokes I imager that uses only bispectrum measurements that are immune to atmospheric phase corruption with a joint Stokes Q and U imager that operates on robust polarimetric ratios. We demonstrate the effectiveness of our technique on 7- and 3-mm wavelength quasar observat...

  18. In-orbit focal adjustment of the AKARI telescope with IRC images

    CERN Document Server

    Kaneda, H; Onaka, T; Wada, T; Ita, Y; Sakon, I; Takagi, T

    2007-01-01

    AKARI currently in space carries onboard a cryogenically-cooled lightweight telescope with silicon carbide mirrors. The wavefront error of the AKARI telescope obtained in laboratory measurements at 9 K showed that expected in-orbit imaging performance was diffraction-limited at a wavelength of 6.2 um. The AKARI telescope has a function of focus adjustment by shifting the secondary mirror in parallel to the optical axis. On the 4th day after the jettison of the cryostat aperture lid in the orbit, we observed a star with the InfraRed Camera (IRC) onboard AKARI. Since the initial star images observed in the near-infrared (IR) bands were significantly blurred, we twice moved the secondary mirror for the focal adjustment based on the results of model analyses as well as data analyses of the near-IR images. In consequence, we have successfully adjusted the focus of the telescope. The in-orbit imaging performance thus obtained for the AKARI telescope is diffraction-limited at a wavelength of 7.3 um, slightly degrade...

  19. High-contrast imager for Complex Aperture Telescopes (HiCAT): 1. Testbed design

    CERN Document Server

    N'Diaye, Mamadou; Pueyo, Laurent; Elliot, Erin; Perrin, Marshall D; Wallace, J Kent; Groff, Tyler; Carlotti, Alexis; Mawet, Dimitri; Sheckells, Matt; Shaklan, Stuart; Macintosh, Bruce; Kasdin, N Jeremy; Soummer, Rémi

    2014-01-01

    Searching for nearby habitable worlds with direct imaging and spectroscopy will require a telescope large enough to provide angular resolution and sensitivity to planets around a significant sample of stars. Segmented telescopes are a compelling option to obtain such large apertures. However, these telescope designs have a complex geometry (central obstruction, support structures, segmentation) that makes high-contrast imaging more challenging. We are developing a new high-contrast imaging testbed at STScI to provide an integrated solution for wavefront control and starlight suppression on complex aperture geometries. We present our approach for the testbed optical design, which defines the surface requirements for each mirror to minimize the amplitude-induced errors from the propagation of out-of-pupil surfaces. Our approach guarantees that the testbed will not be limited by these Fresnel propagation effects, but only by the aperture geometry. This approach involves iterations between classical ray-tracing o...

  20. The optical reflector system for the CANGAROO-II imaging atmospheric Cherenkov telescope

    Science.gov (United States)

    Kawachi, A.; Hayami, Y.; Jimbo, J.; Kamei, S.; Kifune, T.; Kubo, H.; Kushida, J.; LeBohec, S.; Miyawaki, K.; Mori, M.; Nishijima, K.; Patterson, J. R.; Suzuki, R.; Tanimori, T.; Yanagita, S.; Yoshikoshi, T.; Yuki, A.

    2001-01-01

    A new imaging atmospheric Cherenkov telescope with a light-weight reflector has been constructed. Light, robust, and durable mirror facets of containing carbon fiber reinforced plastic laminates were developed for the telescope. The reflector has a parabolic shape ( f/1.1) with a 30 m 2 surface area, which consists of 60 spherical mirror facets. The image size of each mirror facet is 0°.08 (FWHM) on average. The attitude of each facet can be adjusted by stepping motors. After the first in situ adjustment, a point image of about 0°.14 (FWHM) over 3° field of view was obtained. The effect of gravitational load on the optical system was confirmed to be negligible at the focal plane. The telescope has been in operation with an energy threshold for γ-rays of ≲300 GeV since May 1999.

  1. AOLI: Near-diffraction limited imaging in the visible on large ground-based telescopes

    CERN Document Server

    Mackay, Craig; King, David; Labadie, Lucas; Antolin, Marta Puga; Garrido, Antonio; Colodro-Conde, Carlos; Lopez, Roberto; Muthusubramanian, Balaji; Oscoz, Alejandro; Rodriguez-Ramos, Jose; Rodriquez-Ramos, Luis; Fernandez-Valdivia, Jose; Velasco, Sergio

    2016-01-01

    The combination of Lucky Imaging with a low order adaptive optics system was demonstrated very successfully on the Palomar 5m telescope nearly 10 years ago. It is still the only system to give such high-resolution images in the visible or near infrared on ground-based telescope of faint astronomical targets. The development of AOLI for deployment initially on the WHT 4.2 m telescope in La Palma, Canary Islands, will be described in this paper. In particular, we will look at the design and status of our low order curvature wavefront sensor which has been somewhat simplified to make it more efficient, ensuring coverage over much of the sky with natural guide stars as reference object. AOLI uses optically butted electron multiplying CCDs to give an imaging array of 2000 x 2000 pixels.

  2. Imaging performance and tests of soft x-ray telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Spiller, E.; McCorkle, R.; Wilczynski, J. (International Business Machines Corp., Yorktown Heights, NY (USA). Thomas J. Watson Research Center); Golub, L.; Nystrom, G. (Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (USA)); Takacz, P.Z. (Brookhaven National Lab., Upton, NY (USA)); Welch, C. (Lockheed Missile and Space Co., Las Cruces, NM (USA))

    1990-08-01

    Photos obtained during 5 min. of observation time from the flight of our 10 in. normal incidence soft x-ray ({lambda} = 63.5{Angstrom}) telescope on September 11, 1989 are analyzed and the data are compared to the results expected from tests of the mirror surfaces. These tests cover a range of spatial periods from 25 cm to 1{Angstrom}. The photos demonstrate a reduction in the scattering of the multilayer mirror compared to a single surface for scattering angles above 1 arcmin, corresponding to surface irregularities with spatial periods below 10 {mu}m. Our results are used to predict the possible performance of future flights. Sounding rocket observations might be able to reach a resolution around 0.1 arcsec. Higher resolutions will require flights of longer durations and improvements in mirror testing for the largest spatial periods. 21 refs., 7 figs., 1 tab.

  3. Integrated opto-dynamic modeling of the 4m DAG telescope image quality performance

    Science.gov (United States)

    Zago, Lorenzo; Guex, Benjamin; Yesilyaprak, Cahit; Yerli, Sinan K.; Keskin, Onur

    2016-08-01

    The Turkish DAG 4-m telescope is currently through the final design stage. It is to be located on a 3170 m mountain top in Eastern Anatolia. The telescope will be a state-of-the art device, alt-az mount with active primary and adjustable secondary and tertiary mirrors. Its optics design is specially aimed at being compatible with advance adaptive optics instrumentation. The ultimate performance of such a telescope results of multiple concurrent effects from many different components and active functions of the complex system. The paper presents a comprehensive integrated (end-to-end) model of the telescope, comprising in one computational sequence all structural, electrodynamics and oactive optics performance that produce the image quality at the focal plane. The model is entirely programmed in Matlab/Simulink and comprises a finite element model of structure and mirrors, dynamics modal reduction, deformation analyses of structural and optical elements, active optics feedback control in the Zernike modal space.

  4. Nonlinear research of an image motion stabilization system embedded in a space land-survey telescope

    Science.gov (United States)

    Somov, Yevgeny; Butyrin, Sergey; Siguerdidjane, Houria

    2017-01-01

    We consider an image motion stabilization system embedded into a space telescope for a scanning optoelectronic observation of terrestrial targets. Developed model of this system is presented taking into account physical hysteresis of piezo-ceramic driver and a time delay at a forming of digital control. We have presented elaborated algorithms for discrete filtering and digital control, obtained results on analysis of the image motion velocity oscillations in the telescope focal plane, and also methods for terrestrial and in-flight verification of the system.

  5. An efficient feedback calibration algorithm for direct imaging radio telescopes

    Science.gov (United States)

    Beardsley, Adam P.; Thyagarajan, Nithyanandan; Bowman, Judd D.; Morales, Miguel F.

    2017-10-01

    We present the E-field Parallel Imaging Calibration (EPICal) algorithm, which addresses the need for a fast calibration method for direct imaging radio astronomy correlators. Direct imaging involves a spatial fast Fourier transform of antenna signals, alleviating an O(Na ^2) computational bottleneck typical in radio correlators, and yielding a more gentle O(Ng log _2 Ng) scaling, where Na is the number of antennas in the array and Ng is the number of gridpoints in the imaging analysis. This can save orders of magnitude in computation cost for next generation arrays consisting of hundreds or thousands of antennas. However, because antenna signals are mixed in the imaging correlator without creating visibilities, gain correction must be applied prior to imaging, rather than on visibilities post-correlation. We develop the EPICal algorithm to form gain solutions quickly and without ever forming visibilities. This method scales as the number of antennas, and produces results comparable to those from visibilities. We use simulations to demonstrate the EPICal technique and study the noise properties of our gain solutions, showing they are similar to visibility-based solutions in realistic situations. By applying EPICal to 2 s of Long Wavelength Array data, we achieve a 65 per cent dynamic range improvement compared to uncalibrated images, showing this algorithm is a promising solution for next generation instruments.

  6. A particle-in-cell plus Monte Carlo study of plasma-induced damage of normal incidence collector optics used in extreme ultraviolet lithography

    NARCIS (Netherlands)

    Wieggers, R. C.; W. J. Goedheer,; M.R. Akdim,; F. Bijkerk,; Zegeling, P. A.

    2008-01-01

    We present a kinetic simulation of the plasma formed by photoionization in the intense flux of an extreme ultraviolet lithography (EUVL) light source. The model is based on the particle-in-cell plus Monte Carlo approach. The photoelectric effect and ionization by electron collisions are included. Th

  7. Aromatic structure degradation of single layer graphene on an amorphous silicon substrate in the presence of water, hydrogen and Extreme Ultraviolet light

    NARCIS (Netherlands)

    Mund, Baibhav Kumar; Sturm, J.M.; Lee, Christopher James; Bijkerk, Frederik

    2018-01-01

    In this paper we study the reaction of water and graphene under Extreme Ultraviolet (EUV) irradiation and in the presence of hydrogen. In this work, single layer graphene (SLG) on amorphous Si as an underlying substrate was dosed with water (0.75 ML) and exposed to EUV (λ = 13.5 nm, 92 eV) with

  8. Reaching the Diffraction Limit - Differential Speckle and Wide-Field Imaging for the WIYN Telescope

    Science.gov (United States)

    Scott, Nic J.; Howell, Steve; Horch, Elliott

    2016-01-01

    Speckle imaging allows telescopes to achieve diffraction limited imaging performance. The technique requires cameras capable of reading out frames at a very fast rate, effectively 'freezing out' atmospheric seeing. The resulting speckles can be correlated and images reconstructed that are at the diffraction limit of the telescope. These new instruments are based on the successful performance and design of the Differential Speckle Survey Instrument (DSSI).The instruments are being built for the Gemini-N and WIYN telescopes and will be made available to the community via the peer review proposal process. We envision their primary use to be validation and characterization of exoplanet targets from the NASA, K2 and TESS missions and RV discovered exoplanets. Such targets will provide excellent follow-up candidates for both the WIYN and Gemini telescopes. We expect similar data quality in speckle imaging mode with the new instruments. Additionally, both cameras will have a wide-field mode and standard SDSS filters. They will be highly versatile instruments and it is that likely many other science programs will request time on the cameras. The limiting magnitude for speckle observations will remain around 13-14th at WIYN and 16-17th at Gemini, while wide-field, normal CCD imaging operation should be able to go to much fainter, providing usual CCD imaging and photometric capabilities. The instruments will also have high utility as scoring cameras for telescope engineering purposes, or other applications where high time resolution is needed. Instrument support will be provided, including a software pipeline that takes raw speckle data to fully reconstructed images.

  9. Nuclei of nearby disk galaxies .1. A Hubble Space Telescope imaging survey

    NARCIS (Netherlands)

    Phillips, AC; Illingworth, GD; MacKenty, JW; Franx, M

    We present deconvolved images of the central regions of 20 nearby disk galaxies, obtained with the original Planetary Camera of the Hubble Space Telescope. The galaxies span a range in Hubble type from SO to Sm. We have measured surface brightness profiles, and inverted these to estimate

  10. An Atlas of Hubble Space Telescope Spectra and Images of Nearby Spiral Galaxies

    Science.gov (United States)

    Hughes, M. A.; Alonso-Herrero, A.; Axon, D.; Scarlata, C.; Atkinson, J.; Batcheldor, D.; Binney, J.; Capetti, A.; Carollo, C. M.; Dressel, L.; Gerssen, J.; Macchetto, D.; Maciejewski, W.; Marconi, A.; Merrifield, M.; Ruiz, M.; Sparks, W.; Stiavelli, M.; Tsvetanov, Z.; van der Marel, R.

    2003-08-01

    We have observed 54 nearby spiral galaxies with the Space Telescope Imaging Spectrograph (STIS) on the Hubble Space Telescope to obtain optical long-slit spectra of nuclear gas disks and STIS optical (~R band) images of the central 5''×5'' of the galaxies. These spectra are being used to determine the velocity field of nuclear disks and hence to detect the presence of central massive black holes. Here we present the spectra for the successful observations. Dust obscuration can be significant at optical wavelengths, and so we also combine the STIS images with archival Near-Infrared Camera and Multi-Object Spectrometer H-band images to produce color maps to investigate the morphology of gas and dust in the central regions. We find a great variety in the different morphologies, from smooth distributions to well-defined nuclear spirals and dust lanes. Based on observations with the NASA/ESA Hubble Space Telescope obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS5-26555.

  11. Space telescope design to directly image the habitable zone of Alpha Centauri

    CERN Document Server

    Bendek, Eduardo; Lozi, Julien; Thomas, Sandrine; Males, Jared; Weston, Sasha; McElwain, Michael

    2015-01-01

    The scientific interest in directly image and identifying Earth-like planets within the Habitable Zone (HZ) around nearby stars is driving the design of specialized direct imaging mission such as ACESAT, EXO-C, EXO-S and AFTA-C. The inner edge of Alpha Cen A and B Habitable Zone is found at exceptionally large angular separations of 0.7 and 0.4 arcseconds respectively. This enables direct imaging of the system with a 0.3m class telescope. Contrast ratios in the order of 1e-10 are needed to image Earth-brightness planets. Low-resolution (5-band) spectra of all planets, will allow establishing the presence and amount of an atmosphere. This star system configuration is optimal for a specialized small, and stable space telescope, that can achieve high-contrast but has limited resolution. This paper describes an innovative instrument design and a mission concept based on a full Silicon Carbide off-axis telescope, which has a Phase Induce Amplitude Apodization coronagraph embedded in the telescope. This architectur...

  12. Data Mining for Double Stars on VLT Survey Telescope Image Archive

    Science.gov (United States)

    Curelaru, Lucian

    2017-04-01

    The article presents a set of methods and tools used to identify and measure double stars on already existing images produced by the ESO VLT Survey Telescope in Paranal Chile. A precision analysis and a first set of measurements are included.

  13. DEEP HUBBLE SPACE TELESCOPE IMAGING IN NGC 6397: STELLAR DYNAMICS

    Energy Technology Data Exchange (ETDEWEB)

    Heyl, J. S.; Richer, H.; Woodley, K. A. [Department of Physics and Astronomy, University of British Columbia, Vancouver, BC V6T 1Z1 (Canada); Anderson, J.; Dotter, A.; Kalirai, J. [Space Telescope Science Institute, Baltimore, MD 21218 (United States); Fahlman, G.; Stetson, P. [Herzberg Institute for Astrophysics, National Research Council, Victoria, BC (Canada); Hurley, J. [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, Hawthorn, VIC 3122 (Australia); Rich, R. M. [Division of Astronomy, University of California, Los Angeles, CA 90095-1562 (United States); Shara, M.; Zurek, D. [American Museum of Natural History, New York, NY 10024-5192 (United States)

    2012-12-10

    Multi-epoch observations with the Advanced Camera for Surveys on the Hubble Space Telescope provide a unique and comprehensive probe of stellar dynamics within NGC 6397. We are able to confront analytic models of the globular cluster with the observed stellar proper motions. The measured proper motions probe well along the main sequence from 0.8 to below 0.1 M{sub Sun} as well as white dwarfs younger than 1 Gyr. The observed field lies just beyond the half-light radius where standard models of globular cluster dynamics (e.g., based on a lowered Maxwellian phase-space distribution) make very robust predictions for the stellar proper motions as a function of mass. The observed proper motions show no evidence for anisotropy in the velocity distribution; furthermore, the observations agree in detail with a straightforward model of the stellar distribution function. We do not find any evidence that the young white dwarfs have received a natal kick in contradiction with earlier results. Using the observed proper motions of the main-sequence stars, we obtain a kinematic estimate of the distance to NGC 6397 of 2.2{sup +0.5}{sub -0.7} kpc and a mass of the cluster of 1.1 {+-} 0.1 Multiplication-Sign 10{sup 5} M{sub Sun} at the photometric distance of 2.53 kpc. One of the main-sequence stars appears to travel on a trajectory that will escape the cluster, yielding an estimate of the evaporation timescale, over which the number of stars in the cluster decreases by a factor of e, of about 3 Gyr. The proper motions of the youngest white dwarfs appear to resemble those of the most massive main-sequence stars, providing the first direct constraint on the relaxation time of the stars in a globular cluster of greater than or about 0.7 Gyr.

  14. The SWAP EUV Imaging Telescope Part I: Instrument Overview and Pre-Flight Testing

    CERN Document Server

    Seaton, D B; Nicula, B; Halain, J -P; De Groof, A; Thibert, T; Bloomfield, D S; Raftery, C L; Gallagher, P T; Auchère, F; Defise, J -M; D'Huys, E; Lecat, J -H; Mazy, E; Rochus, P; Rossi, L; Schühle, U; Slemzin, V; Yalim, M S; Zender, J

    2012-01-01

    The Sun Watcher with Active Pixels and Image Processing (SWAP) is an EUV solar telescope on board ESA's Project for Onboard Autonomy 2 (PROBA2) mission launched on 2 November 2009. SWAP has a spectral bandpass centered on 17.4 nm and provides images of the low solar corona over a 54x54 arcmin field-of-view with 3.2 arcsec pixels and an imaging cadence of about two minutes. SWAP is designed to monitor all space-weather-relevant events and features in the low solar corona. Given the limited resources of the PROBA2 microsatellite, the SWAP telescope is designed with various innovative technologies, including an off-axis optical design and a CMOS-APS detector. This article provides reference documentation for users of the SWAP image data.

  15. First Images of a Three-layer Compton Telescope Prototype for Treatment Monitoring in Hadron Therapy

    Directory of Open Access Journals (Sweden)

    Gabriela eLlosa

    2016-02-01

    Full Text Available A Compton telescope for dose monitoring in hadron therapy is under development at IFIC. The system consists of three layers of LaBr3 crystals coupled to silicon photomultiplier arrays. Na-22 sources have been successfully imaged reconstructing the data with an ML-EM code. Calibration and temperature stabilization are necessary for the prototype operation at low coincidence rates. A spatial resolution of 7.8 mm FWHM has been obtained in the first imaging tests.

  16. First Images of a Three-Layer Compton Telescope Prototype for Treatment Monitoring in Hadron Therapy.

    Science.gov (United States)

    Llosá, Gabriela; Trovato, Marco; Barrio, John; Etxebeste, Ane; Muñoz, Enrique; Lacasta, Carlos; Oliver, Josep F; Rafecas, Magdalena; Solaz, Carles; Solevi, Paola

    2016-01-01

    A Compton telescope for dose monitoring in hadron therapy is under development at IFIC. The system consists of three layers of LaBr3 crystals coupled to silicon photomultiplier arrays. (22)Na sources have been successfully imaged reconstructing the data with an ML-EM code. Calibration and temperature stabilization are necessary for the prototype operation at low coincidence rates. A spatial resolution of 7.8 mm FWHM has been obtained in the first imaging tests.

  17. First Images of a Three-Layer Compton Telescope Prototype for Treatment Monitoring in Hadron Therapy

    OpenAIRE

    Gabriela eLlosa; Marco eTrovato; John eBarrio; Ane eEtxebeste; Enrique eMunoz; Carlos eLacasta; Oliver, Josep F.; Magdalena eRafecas; Carles eSolaz; Paola eSolevi

    2016-01-01

    A Compton telescope for dose monitoring in hadron therapy is under development at IFIC. The system consists of three layers of LaBr3 crystals coupled to silicon photomultiplier arrays. Na-22 sources have been successfully imaged reconstructing the data with an ML-EM code. Calibration and temperature stabilization are necessary for the prototype operation at low coincidence rates. A spatial resolution of 7.8 mm FWHM has been obtained in the first imaging tests.

  18. Calculation of the extreme ultraviolet radiation of the earth’s plasmasphere

    Institute of Scientific and Technical Information of China (English)

    FOK; Mei-Ching

    2010-01-01

    The dynamic global core plasma model(DGCPM) is used in this paper to calculate the He+ density distribution of the Earth’s plasmasphere and to investigate the configurations and 30.4 nm radiation properties of the plasmasphere.Validation comparisons between the simulation results and IMAGE mission observations show:That the equatorial structure of the plasmapause is mainly located near 5.5 RE and the typical scale of plasmasphere shrinking or expansion within 10 min is approximately 0.1 RE;that the plasmaspheric shoulders are formed and rotate noon-ward from the dawn sector under the conditions of strong southward turning of the interplanetary magnetic field(IMF);that the plasmaspheric plumes will rotate dawn-ward from the night sector and become narrow for the southward turning of the IMF.The simulated images from the lunar orbit show that the plasmasphere locating within the geocentric distance of 5.5 RE corresponds to field of view(FOV) of 10.7°×10.7° for the moon-based EUV imager,and that the 30.4 nm radiation intensity of the plasmasphere is 0.1-11.4 R.The plasmaspheric shoulders and plumes locating toward the moon-side are for the first time simulated with typical scale level of 0.1 RE from the side view of the moon.These simulated results provide an important theoretical basis for the lunar-based EUV camera design.

  19. Generation of bright circularly-polarized extreme ultraviolet high harmonics for magnetic circular dichroism spectroscopy

    CERN Document Server

    Kfir, Ofer; Turgut, Emrah; Knut, Ronny; Zusin, Dmitriy; Popmintchev, Dimitar; Popmintchev, Tenio; Nembach, Hans; Shaw, Justin M; Fleicher, Avner; Kapteyn, Henry; Murnane, Margaret; Cohen, Oren

    2014-01-01

    Circularly-polarized extreme UV and X-ray radiation provides valuable access to the structural, electronic and magnetic properties of materials. To date, such experiments have been possible only using large-scale free-electron lasers or synchrotrons. Here we demonstrate the first bright extreme UV circularly-polarized high harmonics and use this new light source for magnetic circular dichroism measurements at the M-shell absorption edges of cobalt. This work paves the way towards element-specific imaging and spectroscopy of multiple elements simultaneously in magnetic and other chiral media with very high spatio-temporal resolution, all on a tabletop.

  20. High-resolution imaging of the Pluto-Charon system with the Faint Object Camera of the Hubble Space Telescope

    Science.gov (United States)

    Albrecht, R.; Barbieri, C.; Adorf, H.-M.; Corrain, G.; Gemmo, A.; Greenfield, P.; Hainaut, O.; Hook, R. N.; Tholen, D. J.; Blades, J. C.

    1994-01-01

    Images of the Pluto-Charon system were obtained with the Faint Object Camera (FOC) of the Hubble Space Telescope (HST) after the refurbishment of the telescope. The images are of superb quality, allowing the determination of radii, fluxes, and albedos. Attempts were made to improve the resolution of the already diffraction limited images by image restoration. These yielded indications of surface albedo distributions qualitatively consistent with models derived from observations of Pluto-Charon mutual eclipses.

  1. A G-APD based Camera for Imaging Atmospheric Cherenkov Telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Anderhub, H. [Eidgenoessische Technische Hochschule Zuerich, 8093 Zuerich (Switzerland); Backes, M. [Technische Universitaet Dortmund, 44221 Dortmund (Germany); Biland, A.; Boller, A.; Braun, I. [Eidgenoessische Technische Hochschule Zuerich, 8093 Zuerich (Switzerland); Bretz, T. [Ecole Polytechnique Federale de Lausanne, 1015 Lausanne (Switzerland); Commichau, S.; Commichau, V.; Dorner, D.; Gendotti, A. [Eidgenoessische Technische Hochschule Zuerich, 8093 Zuerich (Switzerland); Grimm, O., E-mail: oliver.grimm@phys.ethz.c [Eidgenoessische Technische Hochschule Zuerich, 8093 Zuerich (Switzerland); Gunten, H. von; Hildebrand, D.; Horisberger, U. [Eidgenoessische Technische Hochschule Zuerich, 8093 Zuerich (Switzerland); Koehne, J.-H. [Technische Universitaet Dortmund, 44221 Dortmund (Germany); Kraehenbuehl, T.; Kranich, D.; Lorenz, E.; Lustermann, W. [Eidgenoessische Technische Hochschule Zuerich, 8093 Zuerich (Switzerland); Mannheim, K. [Universitaet Wuerzburg, 97074 Wuerzburg (Germany)

    2011-02-01

    Imaging Atmospheric Cherenkov Telescopes (IACT) for Gamma-ray astronomy are presently using photomultiplier tubes as photo sensors. Geiger-mode avalanche photodiodes (G-APD) promise an improvement in sensitivity and, important for this application, ease of construction, operation and ruggedness. G-APDs have proven many of their features in the laboratory, but a qualified assessment of their performance in an IACT camera is best undertaken with a prototype. This paper describes the design and construction of a full-scale camera based on G-APDs realized within the FACT project (First G-APD Cherenkov Telescope).

  2. SWAP OBSERVATIONS OF THE LONG-TERM, LARGE-SCALE EVOLUTION OF THE EXTREME-ULTRAVIOLET SOLAR CORONA

    Energy Technology Data Exchange (ETDEWEB)

    Seaton, Daniel B.; De Groof, Anik; Berghmans, David; Nicula, Bogdan [Royal Observatory of Belgium-SIDC, Avenue Circulaire 3, B-1180 Brussels (Belgium); Shearer, Paul [Department of Mathematics, 2074 East Hall, University of Michigan, 530 Church Street, Ann Arbor, MI 48109-1043 (United States)

    2013-11-01

    The Sun Watcher with Active Pixels and Image Processing (SWAP) EUV solar telescope on board the Project for On-Board Autonomy 2 spacecraft has been regularly observing the solar corona in a bandpass near 17.4 nm since 2010 February. With a field of view of 54 × 54 arcmin, SWAP provides the widest-field images of the EUV corona available from the perspective of the Earth. By carefully processing and combining multiple SWAP images, it is possible to produce low-noise composites that reveal the structure of the EUV corona to relatively large heights. A particularly important step in this processing was to remove instrumental stray light from the images by determining and deconvolving SWAP's point-spread function from the observations. In this paper, we use the resulting images to conduct the first-ever study of the evolution of the large-scale structure of the corona observed in the EUV over a three year period that includes the complete rise phase of solar cycle 24. Of particular note is the persistence over many solar rotations of bright, diffuse features composed of open magnetic fields that overlie polar crown filaments and extend to large heights above the solar surface. These features appear to be related to coronal fans, which have previously been observed in white-light coronagraph images and, at low heights, in the EUV. We also discuss the evolution of the corona at different heights above the solar surface and the evolution of the corona over the course of the solar cycle by hemisphere.

  3. Extreme Ultraviolet Light Emission from Z-Pinch Discharge Plasma Source

    Science.gov (United States)

    Watanabe, Masato; Song, Inho; Sakamoto, Toshiro; Kobayashi, Yasunori; Okino, Akitoshi; Mohanty, Smruti R.; Horioka, Kazuhiko; Hotta, Eiki

    2006-01-01

    A capillary Z-pinch discharge light source for EUV lithography has been developed. Our device is equipped with a water-cooled ceramic capillary and electrodes, and a solid state pulsed power generator. A stacked static induction thyristors are used as switching elements, which enable high repetition rate operation of pulsed power supply. A magnetic switch is connected in series, which not only assists the semiconductor switch but also provides a preionization current. In the present study, EUV radiation emitted from pinching plasma in a xenon-filled capillary was quantitatively measured using an in-band calorimeter. Time-integrated in-band source image was also observed using a pinhole camera system. Furthermore, new electrode system using plasma jet has been developed.

  4. NON-POTENTIAL FIELDS IN THE QUIET SUN NETWORK: EXTREME-ULTRAVIOLET AND MAGNETIC FOOTPOINT OBSERVATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Chesny, D. L.; Oluseyi, H. M.; Orange, N. B. [Department of Physics and Space Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States)

    2013-11-20

    The quiet Sun (QS) magnetic network is known to contain dynamics which are indicative of non-potential fields. Non-potential magnetic fields forming ''S-shaped'' loop arcades can lead to the breakdown of static activity and have only been observed in high temperature X-ray coronal structures—some of which show eruptive behavior. Thus, analysis of this type of atmospheric structuring has been restricted to large-scale coronal fields. Here we provide the first identification of non-potential loop arcades exclusive to the QS supergranulation network. High-resolution Atmospheric Imaging Assembly data from the Solar Dynamics Observatory have allowed for the first observations of fine-scale ''S-shaped'' loop arcades spanning the network. We have investigated the magnetic footpoint flux evolution of these arcades from Heliospheric and Magnetic Imager data and find evidence of evolving footpoint flux imbalances accompanying the formation of these non-potential fields. The existence of such non-potentiality confirms that magnetic field dynamics leading to the build up of helicity exist at small scales. QS non-potentiality also suggests a self-similar formation process between the QS network and high temperature corona and the existence of self-organized criticality (SOC) in the form of loop-pair reconnection and helicity dissipation. We argue that this type of behavior could lead to eruptive forms of SOC as seen in active region (AR) and X-ray sigmoids if sufficient free magnetic energy is available. QS magnetic network dynamics may be considered as a coronal proxy at supergranular scales, and events confined to the network can even mimic those in coronal ARs.

  5. Soft X-ray irradiance measured by the Solar Aspect Monitor on the Solar Dynamic Observatory Extreme ultraviolet Variability Experiment

    CERN Document Server

    Lin, C Y; Jones, A; Woodraska, D; Caspi, A; Woods, T N; Eparvier, F G; Wieman, S R; Didkovsky, L V

    2016-01-01

    The Solar Aspect Monitor (SAM) is a pinhole camera on the Extreme-ultraviolet Variability Experiment (EVE) aboard the Solar Dynamics Observatory (SDO). SAM projects the solar disk onto the CCD through a metallic filter designed to allow only solar photons shortward of 7 nm to pass. Contamination from energetic particles and out-of-band irradiance is, however, significant in the SAM observations. We present a technique for isolating the 0.01--7 nm integrated irradiance from the SAM signal to produce the first results of broadband irradiance for the time period from May 2010 to May 2014. The results of this analysis agree with a similar data product from EVE's EUV SpectroPhotometer (ESP) to within 25%. We compare our results with measurements from the Student Nitric Oxide Explorer (SNOE) Solar X-ray Photometer (SXP) and the Thermosphere Ionosphere Mesosphere Energetics and Dynamics (TIMED) Solar EUV Experiment (SEE) at similar levels of solar activity. We show that the full-disk SAM broadband results compare we...

  6. HELIOS—A laboratory based on high-order harmonic generation of extreme ultraviolet photons for time-resolved spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Plogmaker, S., E-mail: Stefan.Plogmaker@physics.uu.se, E-mail: Joachim.Terschluesen@physics.uu.se, E-mail: Johan.Soderstrom@physics.uu.se; Terschlüsen, J. A., E-mail: Stefan.Plogmaker@physics.uu.se, E-mail: Joachim.Terschluesen@physics.uu.se, E-mail: Johan.Soderstrom@physics.uu.se; Krebs, N.; Svanqvist, M.; Forsberg, J.; Cappel, U. B.; Rubensson, J.-E.; Siegbahn, H.; Söderström, J., E-mail: Stefan.Plogmaker@physics.uu.se, E-mail: Joachim.Terschluesen@physics.uu.se, E-mail: Johan.Soderstrom@physics.uu.se [Department of Physics and Astronomy, Molecular and Condensed Matter Physics, Uppsala University, P.O. Box 516, 75120 Uppsala (Sweden)

    2015-12-15

    In this paper, we present the HELIOS (High Energy Laser Induced Overtone Source) laboratory, an in-house high-order harmonic generation facility which generates extreme ultraviolet (XUV) photon pulses in the range of 15-70 eV with monochromatized XUV pulse lengths below 35 fs. HELIOS is a source for time-resolved pump-probe/two-color spectroscopy in the sub-50 fs range, which can be operated at 5 kHz or 10 kHz. An optical parametric amplifier is available for pump-probe experiments with wavelengths ranging from 240 nm to 20 000 nm. The produced XUV radiation is monochromatized by a grating in the so-called off-plane mount. Together with overall design parameters, first monochromatized spectra are shown with an intensity of 2 ⋅ 10{sup 10} photons/s (at 5 kHz) in the 29th harmonic, after the monochromator. The XUV pulse duration is measured to be <25 fs after monochromatization.

  7. Two-colour pump–probe experiments with a twin-pulse-seed extreme ultraviolet free-electron laser

    Science.gov (United States)

    Allaria, E.; Bencivenga, F.; Borghes, R.; Capotondi, F.; Castronovo, D.; Charalambous, P.; Cinquegrana, P.; Danailov, M. B.; De Ninno, G.; Demidovich, A.; Di Mitri, S.; Diviacco, B.; Fausti, D.; Fawley, W. M.; Ferrari, E.; Froehlich, L.; Gauthier, D.; Gessini, A.; Giannessi, L.; Ivanov, R.; Kiskinova, M.; Kurdi, G.; Mahieu, B.; Mahne, N.; Nikolov, I.; Masciovecchio, C.; Pedersoli, E.; Penco, G.; Raimondi, L.; Serpico, C.; Sigalotti, P.; Spampinati, S.; Spezzani, C.; Svetina, C.; Trovò, M.; Zangrando, M.

    2013-01-01

    Exploring the dynamics of matter driven to extreme non-equilibrium states by an intense ultrashort X-ray pulse is becoming reality, thanks to the advent of free-electron laser technology that allows development of different schemes for probing the response at variable time delay with a second pulse. Here we report the generation of two-colour extreme ultraviolet pulses of controlled wavelengths, intensity and timing by seeding of high-gain harmonic generation free-electron laser with multiple independent laser pulses. The potential of this new scheme is demonstrated by the time evolution of a titanium-grating diffraction pattern, tuning the two coherent pulses to the titanium M-resonance and varying their intensities. This reveals that an intense pulse induces abrupt pattern changes on a time scale shorter than hydrodynamic expansion and ablation. This result exemplifies the essential capabilities of the jitter-free multiple-colour free-electron laser pulse sequences to study evolving states of matter with element sensitivity. PMID:24048228

  8. Two-colour pump-probe experiments with a twin-pulse-seed extreme ultraviolet free-electron laser.

    Science.gov (United States)

    Allaria, E; Bencivenga, F; Borghes, R; Capotondi, F; Castronovo, D; Charalambous, P; Cinquegrana, P; Danailov, M B; De Ninno, G; Demidovich, A; Di Mitri, S; Diviacco, B; Fausti, D; Fawley, W M; Ferrari, E; Froehlich, L; Gauthier, D; Gessini, A; Giannessi, L; Ivanov, R; Kiskinova, M; Kurdi, G; Mahieu, B; Mahne, N; Nikolov, I; Masciovecchio, C; Pedersoli, E; Penco, G; Raimondi, L; Serpico, C; Sigalotti, P; Spampinati, S; Spezzani, C; Svetina, C; Trovò, M; Zangrando, M

    2013-01-01

    Exploring the dynamics of matter driven to extreme non-equilibrium states by an intense ultrashort X-ray pulse is becoming reality, thanks to the advent of free-electron laser technology that allows development of different schemes for probing the response at variable time delay with a second pulse. Here we report the generation of two-colour extreme ultraviolet pulses of controlled wavelengths, intensity and timing by seeding of high-gain harmonic generation free-electron laser with multiple independent laser pulses. The potential of this new scheme is demonstrated by the time evolution of a titanium-grating diffraction pattern, tuning the two coherent pulses to the titanium M-resonance and varying their intensities. This reveals that an intense pulse induces abrupt pattern changes on a time scale shorter than hydrodynamic expansion and ablation. This result exemplifies the essential capabilities of the jitter-free multiple-colour free-electron laser pulse sequences to study evolving states of matter with element sensitivity.

  9. Efficient method for the determination of extreme-ultraviolet optical constants in reactive materials: application to scandium and titanium.

    Science.gov (United States)

    Uspenskii, Yu A; Seely, John E; Popov, N L; Vinogradov, A V; Pershin, Yu P; Kondratenko, V V

    2004-02-01

    The chemical reaction of a sample with atmospheric gases causes a significant error in the determinantion of the complex refractive index n = 1 - delta + ibeta in the extreme-ultraviolet region. The protection of samples removes this effect but hampers the interpretation of measurements. To overcome this difficulty, we derive the exact dependences on film thickness of the reflectivity and transmissivity of a protected film. These dependences greatly simplify the determination of delta and beta when the spectra of several films with different thickness and identical protection are measured. They also allow the verification of the delta(omega) obtained from the Kramers-Kronig relation and even make the Kramers-Kronig method unnecessary in many cases. As a practical application, the optical constants of Sc and Ti are determined at h omega = 18-70 eV and 18-99 eV, respectively. The essential feature of our experimental technique is deposition of a film sample directly on a silicon photodiode that allows easy operation with both thin (approximately 10-nm) and thick (approximately 100-nm) films. The comparison of calculated reflectivities of Si-Sc multilayers with the measured values shows the high accuracy of the determined delta(omega) and beta(omega).

  10. Performance optimisation of a neon DBD excimer light source operating in the extreme-ultraviolet (84nm)

    Science.gov (United States)

    Carman, Robert; Ward, B. K.; Kane, D. M.

    2009-10-01

    We have investigated the electrical and optical characteristics of a windowless dielectric barrier discharge (DBD) excimer lamp using Neon to generate output at ˜84nm in the extreme-ultraviolet (EUV) spectral range. A detailed comparison of Ne DBD lamp performance for both pulsed and sinusoidal voltage excitation waveforms has been undertaken using otherwise identical operating conditions. Compared to sinusoidal excitation, pulsed operation yields a ˜50% increase in the overall electrical to EUV conversion efficiency, and also allows greater control of parameters associated with the temporal evolution of the EUV pulse shapes (risetime, peak power, pulse width) due to a synchronised breakdown of the discharge gap along the electrode length. The ability to tailor EUV pulse shapes is important for applications in materials processing and surface cleaning. The source is also found to be highly monochromatic with respect to its spectral output at ˜84nm which dominates the spectral emission over the wavelength range 30-550nm. The overall lamp performance, as measured by the EUV output power, electrical to EUV conversion efficiency, and spectral purity at ˜84nm, improves with increasing gas pressure up to 900mb with none of these parameters showing saturation characteristics.

  11. The influence of the Extreme Ultraviolet spectral energy distribution on the structure and composition of the upper atmosphere of exoplanets

    CERN Document Server

    Guo, J H

    2015-01-01

    By varying the profiles of stellar extreme ultraviolet (EUV) spectral energy distribution (SED), we tested the influences of stellar EUV SEDs on the physical and chemical properties of the escaping atmosphere. We apply our model to study four exoplanets, HD\\,189733b, HD\\,209458b, GJ \\,436b, and Kepler-11b. We found that the total mass loss rates of an exoplanet, which are determined mainly by the integrated fluxes, are moderately affected by the profiles of the EUV SED, but the composition and species distributions in the atmosphere can be dramatically modified by the different profiles of the EUV SED. For exoplanets with a high hydrodynamic escape parameter ($\\lambda$), the amount of atomic hydrogen produced by photoionization at different altitudes can vary by one to two orders of magnitude with the variation of stellar EUV SEDs. The effect of photoionization of H is prominent when the EUV SED is dominated by the low-energy spectral region (400-900${\\AA}$), which pushes the transition of H/H$^{+}$ to low al...

  12. Influence of the electrode wear on the EUV generation of a discharge based extreme ultraviolet light source

    Science.gov (United States)

    Vieker, Jochen; Bergmann, Klaus

    2017-08-01

    Reliability and a long maintenance interval are major requirements for the industrial use of an extreme ultraviolet (EUV) source. In this paper we present results on the influence of the electrode erosion on the EUV generation and its lifetime limiting characteristics. The geometry of the electrodes and their influence on the gas pressure distribution within the electrode system have been found to be the key variables to characterize the regime of operation. This better understanding allows for an optimization of device parameters (e.g. gas flow or pulse energy) to counteract the erosion process, in order to increase the maintenance interval and EUV output. The EUV source under investigation is based on a hollow cathode triggered pinch plasma. A new trigger concept is introduced that enables free adjustment of the gas pressure during operation, thus enabling the operation with a high conversion efficiency of up to  >0.7 %/2πsr at 13.5 nm and 2% bandwidth. The efficiency for the peak brilliance is up to ~2.6 W kW-1 mm-2sr-1 while the maximum electrical input power of the system is 15 kW.

  13. All About EVE: Education and Public Outreach for the Extreme Ultraviolet Variability Experiment (EVE) of the NASA Solar Dynamic Observatory

    Science.gov (United States)

    Eparvier, F. G.; McCaffrey, M. S.; Buhr, S. M.

    2008-12-01

    With the aim of meeting NASA goals for education and public outreach as well as support education reform efforts including the National Science Education Standards, a suite of education materials and strategies have been developed by the Cooperative Institute for Environmental Sciences (CIRES) with the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado for the Extreme Ultraviolet Variability Experiment (EVE), which is an instrument aboard the Solar Dynamic Observatory. This paper will examine the education materials that have been developed for teachers in the classroom and scientists who are conducting outreach, including handouts, a website on space weather for teachers, a slideshow presentation about the overall Solar Dynamic Observatory mission, and a DVD with videos explaining the construction and goals of the EVE instrument, a tour of LASP, and an overview of space science careers. The results and potential transferability of a pilot project developed through this effort that engaged English Second Language learners in a semester-long course on space weather that incorporated the used of a Sudden Ionospheric Disturbance (SID) Monitor will be highlighted.

  14. Characterization of carbon contamination under ion and hot atom bombardment in a tin-plasma extreme ultraviolet light source

    Energy Technology Data Exchange (ETDEWEB)

    Dolgov, A., E-mail: a.dolgov@utwente.nl [MESA+ Institute for Nanotechnology, University of Twente, Enschede (Netherlands); Lopaev, D. [Skobeltsyn Institute of Nuclear Physics, Moscow State University, Moscow (Russian Federation); Lee, C.J. [MESA+ Institute for Nanotechnology, University of Twente, Enschede (Netherlands); Zoethout, E. [Dutch Institute for Fundamental Energy Research (DIFFER), Nieuwegein (Netherlands); Medvedev, V. [MESA+ Institute for Nanotechnology, University of Twente, Enschede (Netherlands); Yakushev, O. [Institute for Spectroscopy Russian Academy of Sciences, Moscow (Russian Federation); Bijkerk, F. [MESA+ Institute for Nanotechnology, University of Twente, Enschede (Netherlands)

    2015-10-30

    Highlights: • Carbon film grown during exposure to EUV radiation and high energy ions was studied. • The carbon film is highly resistant to chemical and physical sputtering. • Surface contamination of plasma-facing components is similar to hydrogenated DLC. - Abstract: Molecular contamination of a grazing incidence collector for extreme ultraviolet (EUV) lithography was experimentally studied. A carbon film was found to have grown under irradiation from a pulsed tin plasma discharge. Our studies show that the film is chemically inert and has characteristics that are typical for a hydrogenated amorphous carbon film. It was experimentally observed that the film consists of carbon (∼70 at.%), oxygen (∼20 at.%) and hydrogen (bound to oxygen and carbon), along with a few at.% of tin. Most of the oxygen and hydrogen are most likely present as OH groups, chemically bound to carbon, indicating an important role for adsorbed water during the film formation process. It was observed that the film is predominantly sp{sup 3} hybridized carbon, as is typical for diamond-like carbon. The Raman spectra of the film, under 514 and 264 nm excitation, are typical for hydrogenated diamond-like carbon. Additionally, the lower etch rate and higher energy threshold in chemical ion sputtering in H{sub 2} plasma, compared to magnetron-sputtered carbon films, suggests that the film exhibits diamond-like carbon properties.

  15. Comparison of H2 and He carbon cleaning mechanisms in extreme ultraviolet induced and surface wave discharge plasmas

    CERN Document Server

    Dolgov, A; Rachimova, T; Kovalev, A; Vasilyeva, A; Lee, C J; Krivtsun, V M; Yakushev, O; Bijkerk, F

    2013-01-01

    Cleaning of contamination of optical surfaces by amorphous carbon (a-C) is highly relevant for extreme ultraviolet (EUV) lithography. We have studied the mechanisms for a-C removal from a Si surface. By comparing a-C removal in a surface wave discharge (SWD) plasma and an EUV-induced plasma, the cleaning mechanisms for hydrogen and helium gas environments were determined. The C-atom removal per incident ion was estimated for different sample bias voltages and ion fluxes. It was found that H2 plasmas generally had higher cleaning rates than He plasmas: up to seven times higher for more negatively biased samples in EUV induced plasma. Moreover, for H2, EUV induced plasma was found to be 2-3 times more efficient at removing carbon than the SWD plasma. It was observed carbon removal during exposure to He is due to physical sputtering by He+ ions. In H2, on the other hand, the increase in carbon removal rates is due to chemical sputtering. This is a new C cleaning mechanism for EUV-induced plasma, which we call "E...

  16. Spectral investigations of photoionized plasmas induced in atomic and molecular gases using nanosecond extreme ultraviolet (EUV) pulses

    Energy Technology Data Exchange (ETDEWEB)

    Bartnik, A.; Fiedorowicz, H.; Wachulak, P. [Institute of Optoelectronics, Military University of Technology, Kaliskiego 2, 00-908 Warsaw (Poland)

    2014-07-15

    In this paper, results of spectral investigations of low temperature photoionized plasmas, created by irradiation of gases with intense pulses of extreme ultraviolet (EUV) radiation from a laser-produced plasma (LPP) source, are presented. The LPP source was based on a double-stream KrXe/He gas-puff target irradiated with 4 ns/0.8 J/10 Hz Nd:YAG laser pulses. The most intense emission from the source spanned a relatively narrow spectral region λ ≈ 10–12 nm; however, spectrally integrated intensity at longer wavelengths was also significant. The EUV beam was focused on a gas stream, injected into a vacuum chamber synchronously with the EUV pulses. Irradiation of gases resulted in formation of photoionized plasmas emitting radiation in the EUV range. Radiation spectra, measured for plasmas produced in various gases, are dominated by emission lines, originating from single charged ions. Significant differences in spectral intensities and distributions between plasmas created in neon and molecular gases were observed.

  17. Optical to extreme ultraviolet reddening curves for normal AGN dust and for dust associated with high-velocity outflows

    Science.gov (United States)

    Singh, Japneet; Gaskell, Martin; Gill, Jake

    2017-01-01

    We use mid-IR (WIRE), optical (SDSS), and ultraviolet (GALEX) photometry of over 80,000 AGNs to derive mean attenuation curves from the optical to the rest frame extreme ultraviolet (EUV) for (i) “normal” AGN dust dominating the optical reddening of AGNs and (ii) “BAL dust” - the dust causing the additional extinction in AGNs observed to have broad absorption lines (BALs). Our method confirms that the attenuation curve of “normal” AGN dust is flat in the ultraviolet, as found by Gaskell et al. (2004). In striking contrast to this, the attenuation curve for BAL dust is well fit by a steeply-rising, SMC-like curve. We confirm the shape of the theoretical Weingartner & Draine (2001) SMC curve out to 700 Angstroms but the drop in attenuation to still shorter wavelengths (400 Angstroms) seems to be less than predicted. We find identical attenuation curves for high-ionization and low-ionization BALQSOs. We suggest that attenuation curves appearing to be steeper than the SMC are due to differences in underlying spectra and partial covering by BAL dust. This work was This work was performed under the auspices of the Science Internship Program (SIP) of the University of California at Santa Cruz performed under the auspices of the Science Internship Program (SIP) of the University of California at Santa Cruz.

  18. DIFFRACTION, REFRACTION, AND REFLECTION OF AN EXTREME-ULTRAVIOLET WAVE OBSERVED DURING ITS INTERACTIONS WITH REMOTE ACTIVE REGIONS

    Energy Technology Data Exchange (ETDEWEB)

    Shen Yuandeng; Liu Yu; Zhao Ruijuan; Tian Zhanjun [Yunnan Astronomical Observatory, Chinese Academy of Sciences, Kunming 650011 (China); Su Jiangtao [Key Laboratory of Solar Activity, Chinese Academy of Sciences, Beijing 100012 (China); Li Hui [Key Laboratory of Dark Matter and Space Astronomy, Chinese Academy of Sciences, Nanjing 210008 (China); Ichimoto, Kiyoshi; Shibata, Kazunari, E-mail: ydshen@ynao.ac.cn [Kwasan and Hida Observatories, Kyoto University, Kyoto 6078471 (Japan)

    2013-08-20

    We present observations of the diffraction, refraction, and reflection of a global extreme-ultraviolet (EUV) wave propagating in the solar corona. These intriguing phenomena are observed when the wave interacts with two remote active regions, and together they exhibit properties of an EUV wave. When the wave approached AR11465, it became weaker and finally disappeared in the active region, but a few minutes later a new wavefront appeared behind the active region, and it was not concentric with the incoming wave. In addition, a reflected wave was also simultaneously observed on the wave incoming side. When the wave approached AR11459, it transmitted through the active region directly and without reflection. The formation of the new wavefront and the transmission could be explained with diffraction and refraction effects, respectively. We propose that the different behaviors observed during the interactions may be caused by different speed gradients at the boundaries of the two active regions. We find that the EUV wave formed ahead of a group of expanding loops a few minutes after the start of the loops' expansion, which represents the initiation of the associated coronal mass ejection (CME). Based on these results, we conclude that the EUV wave should be a nonlinear magnetosonic wave or shock driven by the associated CME, which propagated faster than the ambient fast mode speed and gradually slowed down to an ordinary linear wave. Our observations support the hybrid model that includes both fast wave and slow non-wave components.

  19. Excluded volume effects caused by high concentration addition of acid generators in chemically amplified resists used for extreme ultraviolet lithography

    Science.gov (United States)

    Kozawa, Takahiro; Watanabe, Kyoko; Matsuoka, Kyoko; Yamamoto, Hiroki; Komuro, Yoshitaka; Kawana, Daisuke; Yamazaki, Akiyoshi

    2017-08-01

    The resolution of lithography used for the high-volume production of semiconductor devices has been improved to meet the market demands for highly integrated circuits. With the reduction in feature size, the molecular size becomes non-negligible in the resist material design. In this study, the excluded volume effects caused by adding high-concentration acid generators were investigated for triphenylsulfonium nonaflate. The resist film density was measured by X-ray diffractometry. The dependences of absorption coefficient and protected unit concentration on acid generator weight ratio were calculated from the measured film density. Using these values, the effects on the decomposition yield of acid generators, the protected unit fluctuation, and the line edge roughness (LER) were evaluated by simulation on the basis of sensitization and reaction mechanisms of chemically amplified extreme ultraviolet resists. The positive effects of the increase in acid generator weight ratio on LER were predominant below the acid generator weight ratio of 0.3, while the negative effects became equivalent to the positive effects above the acid generator weight ratio of 0.3 owing to the excluded volume effects.

  20. An Upper Limit on the Ratio Between the Extreme Ultraviolet and the Bolometric Luminosities of Stars Hosting Habitable Planets

    Indian Academy of Sciences (India)

    Sujan Sengupta

    2016-06-01

    A large number of terrestrial planets in the classical habitable zone of stars of different spectral types have already been discovered and many are expected to be discovered in the near future. However, owing to the lack of knowledge on the atmospheric properties, the ambient environment of such planets are unknown. It is known that sufficient amount of Extreme Ultraviolet (EUV) radiation from the star can drive hydrodynamic outflow of hydrogen that may drag heavier species from the atmosphere of the planet. If the rate of mass loss is sufficiently high, then substantial amount of volatiles would escape causing the planet to become uninhabitable. Considering energy-limited hydrodynamical mass loss with an escape rate that causes oxygen to escape alongwith hydrogen, an upper limit for the ratio between the EUV and the bolometric luminosities of stars which constrains the habitability of planets around them is presented here. Application of the limit to planet-hosting stars with known EUV luminosities implies that many M-type of stars should not have habitable planets around them.

  1. HELIOS—A laboratory based on high-order harmonic generation of extreme ultraviolet photons for time-resolved spectroscopy

    Science.gov (United States)

    Plogmaker, S.; Terschlüsen, J. A.; Krebs, N.; Svanqvist, M.; Forsberg, J.; Cappel, U. B.; Rubensson, J.-E.; Siegbahn, H.; Söderström, J.

    2015-12-01

    In this paper, we present the HELIOS (High Energy Laser Induced Overtone Source) laboratory, an in-house high-order harmonic generation facility which generates extreme ultraviolet (XUV) photon pulses in the range of 15-70 eV with monochromatized XUV pulse lengths below 35 fs. HELIOS is a source for time-resolved pump-probe/two-color spectroscopy in the sub-50 fs range, which can be operated at 5 kHz or 10 kHz. An optical parametric amplifier is available for pump-probe experiments with wavelengths ranging from 240 nm to 20 000 nm. The produced XUV radiation is monochromatized by a grating in the so-called off-plane mount. Together with overall design parameters, first monochromatized spectra are shown with an intensity of 2 ṡ 1010 photons/s (at 5 kHz) in the 29th harmonic, after the monochromator. The XUV pulse duration is measured to be <25 fs after monochromatization.

  2. HELIOS--A laboratory based on high-order harmonic generation of extreme ultraviolet photons for time-resolved spectroscopy.

    Science.gov (United States)

    Plogmaker, S; Terschlüsen, J A; Krebs, N; Svanqvist, M; Forsberg, J; Cappel, U B; Rubensson, J-E; Siegbahn, H; Söderström, J

    2015-12-01

    In this paper, we present the HELIOS (High Energy Laser Induced Overtone Source) laboratory, an in-house high-order harmonic generation facility which generates extreme ultraviolet (XUV) photon pulses in the range of 15-70 eV with monochromatized XUV pulse lengths below 35 fs. HELIOS is a source for time-resolved pump-probe/two-color spectroscopy in the sub-50 fs range, which can be operated at 5 kHz or 10 kHz. An optical parametric amplifier is available for pump-probe experiments with wavelengths ranging from 240 nm to 20,000 nm. The produced XUV radiation is monochromatized by a grating in the so-called off-plane mount. Together with overall design parameters, first monochromatized spectra are shown with an intensity of 2 ⋅ 10(10) photons/s (at 5 kHz) in the 29th harmonic, after the monochromator. The XUV pulse duration is measured to be <25 fs after monochromatization.

  3. Hubble Space Telescope WFPC-2 Imaging of Cassiopeia A

    CERN Document Server

    Fesen, R A; Chevalier, R A; Borkowski, K J; Gerardy, C L; Lawrence, S S; Van den Bergh, S; Fesen, Robert A.; Morse, Jon A.; Chevalier, Roger A.; Borkowski, Kazimierz J.; Gerardy, Christopher L.; Lawrence, Stephen S.; Bergh, Sidney van den

    2001-01-01

    The young SNR Cassiopeia A was imaged with WFPC-2 through four filters selected to capture the complete velocity range of the remnant's main shell in several important emission lines. Primary lines detected were [O III] 4959,5007, [N II] 6583, [S II] 6716,6731 + [O II] 7319,7330 + [O I] 6300,6364, and [S III] 9069,9532. About 3/4th of the remnant's main shell was imaged in all four filters. Considerable detail is observed in the reverse-shocked ejecta with typical knot scale lengths of 0.2"-0.4" (1 - 2 x 10^16 cm). Both bright and faint emission features appear highly clumped. Large differences in [S III] and [O III] line intensities indicating chemical abundance differences are also seen, particularly in knots located along the bright northern limb and near the base of the northeast jet. A line of curved overlapping filament in the remnant's northwestern rim appears to mark the location of the remnant's reverse shock front in this region. Finger-like ejecta structures elsewhere suggest cases where the revers...

  4. SIMULATION OF ASTRONOMICAL IMAGES FROM OPTICAL SURVEY TELESCOPES USING A COMPREHENSIVE PHOTON MONTE CARLO APPROACH

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, J. R.; Peng, E.; Ahmad, Z.; Bankert, J.; Grace, E.; Hannel, M.; Hodge, M.; Lorenz, S.; Lupu, A.; Meert, A.; Nagarajan, S.; Todd, N.; Winans, A.; Young, M. [Department of Physics and Astronomy, Purdue University, West Lafayette, IN 47907 (United States); Jernigan, J. G. [Space Sciences Laboratory, University of California, Berkeley, CA 94720 (United States); Kahn, S. M.; Rasmussen, A. P.; Chang, C.; Gilmore, D. K. [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, Stanford, CA 94305 (United States); Claver, C., E-mail: peters11@purdue.edu [National Optical Astronomy Observatory, Tucson, AZ 85719 (United States)

    2015-05-15

    We present a comprehensive methodology for the simulation of astronomical images from optical survey telescopes. We use a photon Monte Carlo approach to construct images by sampling photons from models of astronomical source populations, and then simulating those photons through the system as they interact with the atmosphere, telescope, and camera. We demonstrate that all physical effects for optical light that determine the shapes, locations, and brightnesses of individual stars and galaxies can be accurately represented in this formalism. By using large scale grid computing, modern processors, and an efficient implementation that can produce 400,000 photons s{sup −1}, we demonstrate that even very large optical surveys can be now be simulated. We demonstrate that we are able to (1) construct kilometer scale phase screens necessary for wide-field telescopes, (2) reproduce atmospheric point-spread function moments using a fast novel hybrid geometric/Fourier technique for non-diffraction limited telescopes, (3) accurately reproduce the expected spot diagrams for complex aspheric optical designs, and (4) recover system effective area predicted from analytic photometry integrals. This new code, the Photon Simulator (PhoSim), is publicly available. We have implemented the Large Synoptic Survey Telescope design, and it can be extended to other telescopes. We expect that because of the comprehensive physics implemented in PhoSim, it will be used by the community to plan future observations, interpret detailed existing observations, and quantify systematics related to various astronomical measurements. Future development and validation by comparisons with real data will continue to improve the fidelity and usability of the code.

  5. Sparkling extreme-ultraviolet bright dots observed with Hi-C

    Energy Technology Data Exchange (ETDEWEB)

    Régnier, S.; Alexander, C. E.; Walsh, R. W. [Jeremiah Horrocks Institute, University of Central Lancashire, Preston, Lancashire, PR1 2HE (United Kingdom); Winebarger, A. R.; Cirtain, J. [NASA Marshall Space Flight Center, VP 62, Huntsville, AL 35812 (United States); Golub, L.; Korreck, K. E.; Weber, M. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Mitchell, N.; Platt, S. [School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, Lancashire, PR1 2HE (United Kingdom); De Pontieu, B.; Title, A. [Lockheed Martin Solar and Astrophysics Laboratory, 3251 Hanover Street, Palo Alto, CA 94304 (United States); Kobayashi, K. [Center for Space Plasma and Aeronomic Research, 320 Sparkman Dr, Huntsville, AL 35805 (United States); Kuzin, S. [Lebedev Physical Institute, Russian Academy of Sciences, Leninskii pr. 53, Moscow, 119991 (Russian Federation); DeForest, C. E. [Southwest Research Institute, 1050 Walnut Street Suite 300, Boulder, CO 80302 (United States)

    2014-04-01

    Observing the Sun at high time and spatial scales is a step toward understanding the finest and fundamental scales of heating events in the solar corona. The high-resolution coronal (Hi-C) instrument has provided the highest spatial and temporal resolution images of the solar corona in the EUV wavelength range to date. Hi-C observed an active region on 2012 July 11 that exhibits several interesting features in the EUV line at 193 Å. One of them is the existence of short, small brightenings 'sparkling' at the edge of the active region; we call these EUV bright dots (EBDs). Individual EBDs have a characteristic duration of 25 s with a characteristic length of 680 km. These brightenings are not fully resolved by the SDO/AIA instrument at the same wavelength; however, they can be identified with respect to the Hi-C location of the EBDs. In addition, EBDs are seen in other chromospheric/coronal channels of SDO/AIA, which suggests a temperature between 0.5 and 1.5 MK. Based on their frequency in the Hi-C time series, we define four different categories of EBDs: single peak, double peak, long duration, and bursty. Based on a potential field extrapolation from an SDO/HMI magnetogram, the EBDs appear at the footpoints of large-scale, trans-equatorial coronal loops. The Hi-C observations provide the first evidence of small-scale EUV heating events at the base of these coronal loops, which have a free magnetic energy of the order of 10{sup 26} erg.

  6. Silver nanoparticles on nanopatterned LiF(110) surface studied by extreme ultraviolet light scattering

    Energy Technology Data Exchange (ETDEWEB)

    Giglia, Angelo, E-mail: giglia@iom.cnr.it; Nannarone, Stefano [Istituto Officina dei Materiali - Consiglio Nazionale delle Ricerche, Laboratorio Tecnologie Avanzate e NanoSCienza, Area Science Park Basovizza, S.S. 14 Km 163.5, 34149 Trieste (Italy); Miotti, Paolo [Istituto di Fotonica e Nanotecnologie - Consiglio Nazionale delle Ricerche, Via Trasea 7, 35131 Padova (Italy); Parisse, Pietro [Sincrotrone Trieste S.C.p.A., S.S. 14 km 163.5, 34149 Basovizza, Trieste (Italy)

    2015-12-21

    A LiF(110) surface featuring a ridge-and-valley nanopatterned structure periodic along the [−1,1,0] direction (period and height of the order of 30 nm and 10 nm, respectively) formed by [001] macrosteps exposing (100) and (010) facets was functionalized by rows of Ag nanoparticles and studied by elastic light scattering in the energy range 50–100 eV. Families of diffraction efficiencies curves were taken at grazing incidence angle and fixed photon energy as a function of scattering angle, and elastic scattering curves were taken at fixed scattering angle as a function of energy. The scattering curves presented well-defined features ascribable to the periodicities of the surface, or equivalently to the reciprocal q{sub X} vectors correlated with the power spectral density features of topological images of atomic force microscopy. Other characteristics of the functionalized surface, including the height of ridge-valley profile, the Ag nanoparticle dimensions, and the material distribution in the scattering plane, were obtained by fitting the experimental zero and first order efficiency curves to simulation results of a parameterized model. The simulations were carried out adapting an in-house code based on the electromagnetic differential method, and the different material properties were taken into account by a space dependent complex dielectric constant. Information along the direction perpendicular to the scattering plane was not accessible but morphological insights were obtained combining light diffraction with atomic force microscopy. The results indicate nanoparticles with a quasi-ellipsoidal shape prolate along the ridge direction with minor and major axes of ∼12 nm and ∼21 nm, respectively.

  7. Space Telescope Design to Directly Image the Habitable Zone of Alpha Centauri

    Science.gov (United States)

    Bendek, Eduardo A.; Belikov, Ruslan; Lozi, Julien; Thomas, Sandrine; Males, Jared; Weston, Sasha; McElwain, Michael

    2015-01-01

    The scientific interest in directly imaging and identifying Earth-like planets within the Habitable Zone (HZ) around nearby stars is driving the design of specialized direct imaging missions such as ACESAT, EXO-C, EXO-S and AFTA-C. The inner edge of Alpha Cen A&B Habitable Zone is found at exceptionally large angular separations of 0.7" and 0.4" respectively. This enables direct imaging of the system with a 0.3m class telescope. Contrast ratios on the order of 10(exp 10) are needed to image Earth-brightness planets. Low-resolution (5-band) spectra of all planets may allow establishing the presence and amount of an atmosphere. This star system configuration is optimal for a specialized small, and stable space telescope that can achieve high-contrast but has limited resolution. This paper describes an innovative instrument design and a mission concept based on a full Silicon Carbide off-axis telescope, which has a Phase Induced Amplitude Apodization coronagraph embedded in the telescope. This architecture maximizes stability and throughput. A Multi-Star Wave Front algorithm is implemented to drive a deformable mirror controlling simultaneously diffracted light from the on-axis and binary companion star. The instrument has a Focal Plane Occulter to reject starlight into a high precision pointing control camera. Finally we utilize a Orbital Differential Imaging (ODI) post-processing method that takes advantage of a highly stable environment (Earth-trailing orbit) and a continuous sequence of images spanning 2 years, to reduce the final noise floor in post processing to approximately 2e-11 levels, enabling high confidence and at least 90% completeness detections of Earth-like planets.

  8. Space Telescope Design to Directly Image the Habitable Zone of Alpha Centauri

    Science.gov (United States)

    Bendek, Eduardo A.; Belikov, Ruslan; Lozi, Julien; Thomas, Sandrine; Males, Jared; Weston, Sasha; McElwain, Michael

    2015-01-01

    The scientific interest in directly imaging and identifying Earth-like planets within the Habitable Zone (HZ) around nearby stars is driving the design of specialized direct imaging missions such as ACESAT, EXO-C, EXO-S and AFTA-C. The inner edge of Alpha Cen A&B Habitable Zone is found at exceptionally large angular separations of 0.7" and 0.4" respectively. This enables direct imaging of the system with a 0.3m class telescope. Contrast ratios on the order of 10(exp 10) are needed to image Earth-brightness planets. Low-resolution (5-band) spectra of all planets may allow establishing the presence and amount of an atmosphere. This star system configuration is optimal for a specialized small, and stable space telescope that can achieve high-contrast but has limited resolution. This paper describes an innovative instrument design and a mission concept based on a full Silicon Carbide off-axis telescope, which has a Phase Induced Amplitude Apodization coronagraph embedded in the telescope. This architecture maximizes stability and throughput. A Multi-Star Wave Front algorithm is implemented to drive a deformable mirror controlling simultaneously diffracted light from the on-axis and binary companion star. The instrument has a Focal Plane Occulter to reject starlight into a high precision pointing control camera. Finally we utilize a Orbital Differential Imaging (ODI) post-processing method that takes advantage of a highly stable environment (Earth-trailing orbit) and a continuous sequence of images spanning 2 years, to reduce the final noise floor in post processing to approximately 2e-11 levels, enabling high confidence and at least 90% completeness detections of Earth-like planets.

  9. Hubble space telescope planetary camera images of NGC 1316

    CERN Document Server

    Shaya, E J; Currie, D G; Faber, S M; Ajhar, E A; Lauer, T R; Groth, E J; Grillmair, C J; Lynds, C R; O'Neil, E J; Shaya, Edward J; Dowling, Daniel M; Currie, Douglas G; Ajhar, Edward A; Lauer, Tod R; Groth, Edward J; Grillmair, Carl J; Lynds, C Roger; O'Neil, Earl J

    1996-01-01

    We present HST Planetary Camera V and I~band images of the central region of the peculiar giant elliptical galaxy NGC~1316. The inner profile is well fit by a nonisothermal core model with a core radius of 0.41" +/- 0.02" (34 pc). At an assumed distance of 16.9 Mpc, the deprojected luminosity density reaches \\sim 2.0 \\times 10^3 L_{\\sun} pc^{-3}. Outside the inner two or three arcseconds, a constant mass-to-light ratio of \\sim 2.2 \\pm 0.2 is found to fit the observed line width measurements. The line width measurements of the center indicate the existence of either a central dark object of mass 2 \\times 10^9 M_{\\sun}, an increase in the stellar mass-to-light ratio by at least a factor of two for the inner few arcseconds, or perhaps increasing radial orbit anisotropy towards the center. The mass-to-light ratio run in the center of NGC~1316 resembles that of many other giant ellipticals, some of which are known from other evidence to harbor central massive dark objects (MDO's). We also examine twenty globular c...

  10. Observing---and Imaging---Active Galactic Nuclei with the Event Horizon Telescope

    CERN Document Server

    Fish, Vincent L; Bouman, Katherine L; Chael, Andrew A; Johnson, Michael D; Doeleman, Sheperd S; Blackburn, Lindy; Wardle, John F C; Freeman, William T

    2016-01-01

    Originally developed to image the shadow region of the central black hole in Sagittarius A* and in the nearby galaxy M87, the Event Horizon Telescope (EHT) provides deep, very high angular resolution data on other AGN sources too. The challenges of working with EHT data have spurred the development of new image reconstruction algorithms. This work briefly reviews the status of the EHT and its utility for observing AGN sources, with emphasis on novel imaging techniques that offer the promise of better reconstructions at 1.3 mm and other wavelengths.

  11. The Topo-trigger: a new concept of stereo trigger system for imaging atmospheric Cherenkov telescopes

    CERN Document Server

    López-Coto, Rubén; Paoletti, Riccardo; Bigas, Oscar Blanch; Cortina, Juan

    2016-01-01

    Imaging atmospheric Cherenkov telescopes (IACTs) such as the Major Atmospheric Gamma-ray Imaging Cherenkov (MAGIC) telescopes endeavor to reach the lowest possible energy threshold. In doing so the trigger system is a key element. Reducing the trigger threshold is hampered by the rapid increase of accidental triggers generated by ambient light, the so-called Night Sky Background (NSB). In this paper we present a topological trigger, dubbed Topo-trigger, which rejects events on the basis of their relative orientation in the telescope cameras. We have simulated and tested the trigger selection algorithm in the MAGIC telescopes. The algorithm was tested using MonteCarlo simulations and shows a rejection of 85% of the accidental stereo triggers while preserving 99 % of the gamma rays. A full implementation of this trigger system would achieve an increase in collection area between 10 and 20% at the energy threshold. The analysis energy threshold of the instrument is expected to decrease by ?8 %. The selection alg...

  12. A Generic and Efficient E-field Parallel Imaging Correlator for Next-Generation Radio Telescopes

    CERN Document Server

    Thyagarajan, Nithyanandan; Bowman, Judd D; Morales, Miguel F

    2015-01-01

    Modern radio telescopes are favoring densely packed array layouts consisting of large numbers of antennas ($N_\\textrm{a}\\gtrsim 1000$). Since the complexity of traditional correlators scales as $\\mathcal{O}(N_\\textrm{a}^2)$, there will be a steep cost for realizing the full imaging potential of these powerful instruments. Through our generic and efficient E-field Parallel Imaging Correlator (EPIC), we present the first software demonstration of a generalized direct imaging algorithm known as the Modular Optimal Frequency Fourier (MOFF) imager. It takes advantage of the multiplication-convolution theorem of Fourier transforms. Not only does it bring down the cost for dense layouts to $\\mathcal{O}(N_\\textrm{a}\\log_2 N_\\textrm{a})$ but can also image from irregularly arranged heterogeneous antenna arrays. EPIC is highly modular and parallelizable, implemented in object oriented Python, and publicly available. We have verified the images produced to be equivalent to those produced using traditional techniques. We...

  13. Non-interferometer Phase-differential Imaging Method with a Single Telescope Installation

    Science.gov (United States)

    Choi, Jaeho

    2016-01-01

    Non-interferometer phase-differential imaging method for direct imaging of the astronomical objects will be presented. The feasibility of non-interferometry method to retrieve the phase differential images of the astronomical objects is demonstrated in the laboratory experiments exploiting the two-dimensional Foucault knife-edge filtering method which is installed on a single telescope. The experiment setup is essentially analogous to the Schlieren imaging apparatus that can be taken images using an incoherent light source. The fractional derivation filtering by the two-dimensional knife-edge filter is developed in order to acquire the phase information of the object. The intensities of filtering images by the 2D knife-edge at several points along the optical axis of the telescope are substituted in the transport-intensity equation to obtain phase-differential images of the astronomical objects. Then the phase-differential images are obtained by two image intensities taken along the optical axis. In our experiment, a mono-directional scanning scheme of the 2DFK was exploited to reduce number of scan as well as increase the spatial resolution of images. An illuminated light out of a bundle of optical fibers as an artificial astronomical object is used our laboratory based experiment. The light from the each optical fibers in the fiber bundle that intensities have exiguously different or barely visible are represented the brightness of the astronomical objects. The experiment result, the phase contrast images, shows that barely identified object from an intensity based image has rendered almost equivalent contrast as the bright object. It represents that our proposed method can be recovered from phase difference of the object light that could not be identified from the intensity of objects brightness. The proposed method has a feature of render phase-differential images as well as compensates atmospheric turbulence with the setup mounting on a single-telescope. The

  14. Differential speckle and wide-field imaging for the Gemini-North and WIYN telescopes

    Science.gov (United States)

    Scott, Nicholas J.; Howell, Steve B.; Horch, Elliott P.

    2016-07-01

    Two new instruments are currently being built for the Gemini-North and WIYN telescopes. They are based on the existing DSSI (Differential Speckle Survey Instrument), but the new dual-channel instruments will have both speckle and "wide-field" imaging capabilities. Nearly identical copies of the instrument will be installed as a public access permanent loan at the Gemini-N and WIYN telescopes. Many exoplanet targets will come from the NASA K2 and TESS missions. The faint limiting magnitude, for speckle observations, will remain around 16 to 17th magnitude depending on observing conditions, while wide-field, high speed imaging should be able to go to 21+. For Gemini, the instrument will be remotely operable from either the mid-level facility at Hale Pohaku or the remote operations base in Hilo.

  15. Compact low resolution spectrograph, an imaging and long slit spectrograph for robotic telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Rabaza, O., E-mail: ovidio@ugr.es [Department of Civil Engineering, University of Granada, Severo Ochoa Str. s/n, 18071 Granada (Spain); Institute of Astrophysics of Andalucía (CSIC), Glorieta de la Astronomía s/n, 18008 Granada (Spain); Jelinek, M.; Cunniffe, R.; Ruedas-Sánchez, J. [Institute of Astrophysics of Andalucía (CSIC), Glorieta de la Astronomía s/n, 18008 Granada (Spain); Castro-Tirado, A. J. [Institute of Astrophysics of Andalucía (CSIC), Glorieta de la Astronomía s/n, 18008 Granada (Spain); Department of Systems and Automatic Engineering, University of Málaga, 29071 Málaga (Spain); Zeman, J. [Astronomical Institute of the Academic of Sciences, Fricova 298, 25165 Ondrejov (Czech Republic); Hudec, R. [Astronomical Institute of the Academic of Sciences, Fricova 298, 25165 Ondrejov (Czech Republic); Faculty of Electrical Engineering, Czech Technical University, Technicka 2, Praha 6 (Czech Republic); Sabau-Graziati, L. [National Institute of Aerospace Technology, Carretera de Ajalvir, 28850 Madrid (Spain)

    2013-11-15

    The COmpact LOw REsolution Spectrograph (COLORES) is a compact and lightweight (13 kg) f/8 imaging spectrograph designed for robotic telescopes, now installed and operating on the TELMA, a rapid-slewing 60 cm telescope of the BOOTES-2 observatory in Málaga (Spain). COLORES is a multi-mode instrument that enables the observer to seamlessly switch between low-dispersion spectroscopy and direct imaging modes during an observation. In this paper, we describe the instrument and its development, from the initial scientific requirements through the optical design process to final configuration with theoretical performance calculations. The mechanical and electronic design is described, methods of calibration are discussed and early laboratory and scientific results are shown.

  16. Mechanism and model of atomic hydrogen cleaning for different types of carbon contamination on extreme ultraviolet multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Song, Yuan [State Key Laboratory of Applied Optics, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun, Jilin 130033 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Lu, Qipeng, E-mail: Luqipeng51@126.com [State Key Laboratory of Applied Optics, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun, Jilin 130033 (China); Gong, Xuepeng [State Key Laboratory of Applied Optics, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun, Jilin 130033 (China)

    2016-08-01

    The use of atomic hydrogen to clean carbon contaminants on multilayers in extreme ultraviolet lithography systems has been extensively investigated. Additional knowledge of the cleaning rate would not only provide a better understanding of the reaction mechanism but would also inform the industry's cleaning process. In this paper, which focuses on the atomic-hydrogen-based carbon contamination cleaning process, a possible mechanism for the associated reactions is studied and a cleaning model is established. The calculated results are in good agreement with the existing experimental data in the literature. The influences of the main factors – such as activation energy and types of contamination – on the cleaning rate are addressed by the model. The model shows that the cleaning rate depends on the type of carbon contamination. The rate for a polymer-like carbon layer is higher than the rate for graphitic and diamond-like carbon layers. At 340 K, the rate for a polymer-like carbon layer is 10 times higher than for graphitic carbon layers. This model could be used effectively to predict and evaluate the cleaning rates for various carbon contamination types. - Highlights: • Mechanism of H{sup 0} cleaning with C contamination on EUV multilayers is given. • Reflectivity of multilayers rely on various types of C contamination is analyzed. • A model of H{sup 0} cleaning various types of C contamination layers is built. • Accurate predicting and evaluating the rate of H{sup 0} cleaning by the mode is proved. • It would be beneficial for improving H{sup 0} cleaning process of carbon layers.

  17. THE INFLUENCE OF THE EXTREME ULTRAVIOLET SPECTRAL ENERGY DISTRIBUTION ON THE STRUCTURE AND COMPOSITION OF THE UPPER ATMOSPHERE OF EXOPLANETS

    Energy Technology Data Exchange (ETDEWEB)

    Guo, J. H. [Yunnan Observatories, Chinese Academy of Sciences, P.O. Box 110, Kunming 650011 (China); Ben-Jaffel, Lotfi, E-mail: guojh@ynao.ac.cn, E-mail: bjaffel@iap.fr [Sorbonne Universités, UPMC Univ. Paris 6 et CNRS, UMR 7095, Institut Astrophysique de Paris, F-75014 Paris (France)

    2016-02-20

    By varying the profiles of stellar extreme ultraviolet (EUV) spectral energy distributions (SEDs), we tested the influences of stellar EUV SEDs on the physical and chemical properties of an escaping atmosphere. We apply our model to study four exoplanets: HD 189733b, HD 209458b, GJ 436b, and Kepler-11b. We find that the total mass loss rates of an exoplanet, which are determined mainly by the integrated fluxes, are moderately affected by the profiles of the EUV SED, but the composition and species distributions in the atmosphere can be dramatically modified by the different profiles of the EUV SED. For exoplanets with a high hydrodynamic escape parameter (λ), the amount of atomic hydrogen produced by photoionization at different altitudes can vary by one to two orders of magnitude with the variation of stellar EUV SEDs. The effect of photoionization of H is prominent when the EUV SED is dominated by the low-energy spectral region (400–900 Å), which pushes the transition of H/H{sup +} to low altitudes. In contrast, the transition of H/H{sup +} moves to higher altitudes when most photons are concentrated in the high-energy spectral region (50–400 Å). For exoplanets with a low λ, the lower temperatures of the atmosphere make many chemical reactions so important that photoionization alone can no longer determine the composition of the escaping atmosphere. For HD 189733b, it is possible to explain the time variability of Lyα between 2010 and 2011 by a change in the EUV SED of the host K-type star, yet invoking only thermal H i in the atmosphere.

  18. Fabrication of Thiol-Ene "Clickable" Copolymer-Brush Nanostructures on Polymeric Substrates via Extreme Ultraviolet Interference Lithography.

    Science.gov (United States)

    Dübner, Matthias; Gevrek, Tugce N; Sanyal, Amitav; Spencer, Nicholas D; Padeste, Celestino

    2015-06-03

    We demonstrate a new approach to grafting thiol-reactive nanopatterned copolymer-brush structures on polymeric substrates by means of extreme ultraviolet (EUV) interference lithography. The copolymer brushes were designed to contain maleimide functional groups as thiol-reactive centers. Fluoropolymer films were exposed to EUV radiation at the X-ray interference lithography beamline (XIL-II) at the Swiss Light Source, in order to create radical patterns on their surfaces. The radicals served as initiators for the copolymerization of thiol-ene "clickable" brushes, composed of a furan-protected maleimide monomer (FuMaMA) and different methacrylates, namely, methyl methacrylate (MMA), ethylene glycol methyl ether methacrylate (EGMA), or poly(ethylene glycol) methyl ether methacrylate (PEGMA). Copolymerization with ethylene-glycol-containing monomers provides antibiofouling properties to these surfaces. The number of reactive centers on the grafted brush structures can be tailored by varying the monomer ratios in the feed. Grafted copolymers were characterized by using attenuated total reflection infrared (ATR-IR) spectroscopy. The reactive maleimide methacrylate (MaMA) units were utilized to conjugate thiol-containing moieties using the nucleophilic Michael-addition reaction, which proceeds at room temperature without the need for any metal-based catalyst. Using this approach, a variety of functionalities was introduced to yield polyelectrolytes, as well as fluorescent and light-responsive polymer-brush structures. Functionalization of the brush structures was demonstrated via ATR-IR and UV-vis spectroscopy and fluorescence microscopy, and was also indicated by a color switch. Furthermore, grafted surfaces were generated via plasma activation, showing a strongly increased wettability for polyelectrolytes and a reversible switch in static water contact angle (CA) of up to 18° for P(EGMA-co-MaMA-SP) brushes, upon exposure to alternating visible and UV-light irradiation.

  19. Hubble Space Telescope Imaging of the Expanding Nebular Remnant of the 2006 Outburst of RS Ophiuchi

    CERN Document Server

    Harman, D J; Darnley, M J; O'Brien, T J; Bond, H E; Starrfield, S; Evans, A; Eyres, S P S; Ribeiro, V A R M; Echevarria, J M

    2008-01-01

    We report {\\it Hubble Space Telescope} imaging obtained 155 days and 449 days after the 2006 outburst of RS Ophiuchi. Both epochs show evidence of extended emission, consistent with that seen in earlier radio observations, and a maximum expansion rate of $3200\\pm300$ km s$^{-1}$ (in the plane of the sky). The extended structure is consistent with the remnant having a bipolar morphology with an inclination similar to that determined for the binary.

  20. Deep Hubble Space Telescope imaging of IC 1613. II. The star formation history

    NARCIS (Netherlands)

    Skillman, ED; Tolstoy, E; Cole, AA; Dolphin, AE; Saha, A; Gallagher, JS; Dohm-Palmer, RC; Mateo, M

    2003-01-01

    We have taken deep images of an outlying field in the Local Group dwarf irregular galaxy IC 1613 with the WFPC2 aboard the Hubble Space Telescope in the standard broadband F555W (V, 8 orbits) and F814W (I,16 orbits) filters. The photometry reaches to V=27.7 (M-V=+3.4) and I=27.1 (M-I=+2.8) at the 50

  1. High-contrast imager for complex aperture telescopes (HiCAT): 1. testbed design

    Science.gov (United States)

    N'Diaye, Mamadou; Choquet, Elodie; Pueyo, Laurent; Elliot, Erin; Perrin, Marshall D.; Wallace, J. Kent; Groff, Tyler; Carlotti, Alexis; Mawet, Dimitri; Sheckells, Matt; Shaklan, Stuart; Macintosh, Bruce; Kasdin, N. Jeremy; Soummer, Rémi

    2013-09-01

    Searching for nearby habitable worlds with direct imaging and spectroscopy will require a telescope large enough to provide angular resolution and sensitivity to planets around a significant sample of stars. Segmented telescopes are a compelling option to obtain such large apertures. However, these telescope designs have a complex geometry (central obstruction, support structures, segmentation) that makes high-contrast imaging more challenging. We are developing a new high-contrast imaging testbed at STScI to provide an integrated solution for wavefront control and starlight suppression on complex aperture geometries. We present our approach for the testbed optical design, which defines the surface requirements for each mirror to minimize the amplitude-induced errors from the propagation of out-of-pupil surfaces. Our approach guarantees that the testbed will not be limited by these Fresnel propagation effects, but only by the aperture geometry. This approach involves iterations between classical ray-tracing optical design optimization, and end-to-end Fresnel propagation with wavefront control (e.g. Electric Field Conjugation / Stroke Minimization). The construction of the testbed is planned to start in late Fall 2013.

  2. MuSICa image slicer prototype at 1.5-m GREGOR solar telescope

    Science.gov (United States)

    Calcines, A.; López, R. L.; Collados, M.; Vega Reyes, N.

    2014-07-01

    Integral Field Spectroscopy is an innovative technique that is being implemented in the state-of-the-art instruments of the largest night-time telescopes, however, it is still a novelty for solar instrumentation. A new concept of image slicer, called MuSICa (Multi-Slit Image slicer based on collimator-Camera), has been designed for the integral field spectrograph of the 4-m European Solar Telescope. This communication presents an image slicer prototype of MuSICa for GRIS, the spectrograph of the 1.5-m GREGOR solar telescope located at the Observatory of El Teide. MuSICa at GRIS reorganizes a 2-D field of view of 24.5 arcsec into a slit of 0.367 arcsec width by 66.76 arcsec length distributed horizontally. It will operate together with the TIP-II polarimeter to offer high resolution integral field spectropolarimetry. It will also have a bidimensional field of view scanning system to cover a field of view up to 1 by 1 arcmin.

  3. SIMULTANEOUS EXOPLANET CHARACTERIZATION AND DEEP WIDE-FIELD IMAGING WITH A DIFFRACTIVE PUPIL TELESCOPE

    Energy Technology Data Exchange (ETDEWEB)

    Guyon, Olivier; Eisner, Josh A.; Angel, Roger; Woolf, Neville J. [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States); Bendek, Eduardo A.; Milster, Thomas D. [College of Optical Sciences, University of Arizona, Tucson, AZ 85721 (United States); Ammons, S. Mark [Lawrence Livermore National Laboratory, Physics Division L-210, 7000 East Avenue, Livermore, CA 94550 (United States); Shao, Michael; Shaklan, Stuart; Levine, Marie; Nemati, Bijan [Jet Propulsion Laboratory, 4800 Oak Grove Drive, Pasadena, CA 91109 (United States); Martinache, Frantz [National Astronomical Observatory of Japan, Subaru Telescope, Hilo, HI 96720 (United States); Pitman, Joe [Exploration Sciences, P.O. Box 24, Pine, CO 80470 (United States); Woodruff, Robert A. [Lockheed Martin, 2081 Evergreen Avenue, Boulder, CO 80304 (United States); Belikov, Ruslan, E-mail: guyon@naoj.org [NASA Ames Research Center, Moffett Field, CA 94035 (United States)

    2013-04-10

    High-precision astrometry can identify exoplanets and measure their orbits and masses while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-{mu}as accuracy astrometric measurements from wide-field images by creating faint but sharp diffraction spikes around the bright target star. The DPT allows simultaneous astrometric measurement and coronagraphic imaging, and we discuss and quantify in this paper the scientific benefits of this combination for exoplanet science investigations: identification of exoplanets with increased sensitivity and robustness, and ability to measure planetary masses to high accuracy. We show how using both measurements to identify planets and measure their masses offers greater sensitivity and provides more reliable measurements than possible with separate missions, and therefore results in a large gain in mission efficiency. The combined measurements reliably identify potentially habitable planets in multiple systems with a few observations, while astrometry or imaging alone would require many measurements over a long time baseline. In addition, the combined measurement allows direct determination of stellar masses to percent-level accuracy, using planets as test particles. We also show that the DPT maintains the full sensitivity of the telescope for deep wide-field imaging, and is therefore compatible with simultaneous scientific observations unrelated to exoplanets. We conclude that astrometry, coronagraphy, and deep wide-field imaging can be performed simultaneously on a single telescope without significant negative impact on the performance of any of the three techniques.

  4. The drive system of the Major Atmospheric Gamma-ray Imaging Cherenkov Telescope

    CERN Document Server

    Bretz, T; Wagner, R M; Sawallisch, P

    2008-01-01

    The MAGIC telescope is an imaging atmospheric Cherenkov telescope, designed to observe very high energy gamma-rays while achieving a low energy threshold. One of the key science goals is fast follow-up of the enigmatic and short lived gamma-ray bursts. The drive system for the telescope has to meet two basic demands: (1) During normal observations, the 72-ton telescope has to be positioned accurately, and has to track a given sky position with high precision at a typical rotational speed in the order of one revolution per day. (2) For successfully observing GRB prompt emission and afterglows, it has to be powerful enough to position to an arbitrary point on the sky within a few ten seconds and commence normal tracking immediately thereafter. To meet these requirements, the implementation and realization of the drive system relies strongly on standard industry components to ensure robustness and reliability. In this paper, we describe the mechanical setup, the drive control and the calibration of the pointing,...

  5. Image processing improvement for optical observations of space debris with the TAROT telescopes

    Science.gov (United States)

    Thiebaut, C.; Theron, S.; Richard, P.; Blanchet, G.; Klotz, A.; Boër, M.

    2016-07-01

    CNES is involved in the Inter-Agency Space Debris Coordination Committee (IADC) and is observing space debris with two robotic ground based fully automated telescopes called TAROT and operated by the CNRS. An image processing algorithm devoted to debris detection in geostationary orbit is implemented in the standard pipeline. Nevertheless, this algorithm is unable to deal with debris tracking mode images, this mode being the preferred one for debris detectability. We present an algorithm improvement for this mode and give results in terms of false detection rate.

  6. Artificial neural network for the determination of Hubble Space Telescope aberration from stellar images

    Science.gov (United States)

    Barrett, Todd K.; Sandler, David G.

    1993-01-01

    An artificial-neural-network method, first developed for the measurement and control of atmospheric phase distortion, using stellar images, was used to estimate the optical aberration of the Hubble Space Telescope. A total of 26 estimates of distortion was obtained from 23 stellar images acquired at several secondary-mirror axial positions. The results were expressed as coefficients of eight orthogonal Zernike polynomials: focus through third-order spherical. For all modes other than spherical the measured aberration was small. The average spherical aberration of the estimates was -0.299 micron rms, which is in good agreement with predictions obtained when iterative phase-retrieval algorithms were used.

  7. Imaging Analysis of the Hard X-Ray Telescope ProtoEXIST2 and New Techniques for High-resolution Coded-aperture Telescopes

    Science.gov (United States)

    Hong, Jaesub; Allen, Branden; Grindlay, Jonathan; Barthelmy, Scott

    2017-01-01

    Wide-field (≳100 deg{}2) hard X-ray coded-aperture telescopes with high angular resolution (≲2‧) will enable a wide range of time domain astrophysics. For instance, transient sources such as gamma-ray bursts can be precisely localized without the assistance of secondary focusing X-ray telescopes to enable rapid followup studies. On the other hand, high angular resolution in coded-aperture imaging introduces a new challenge in handling the systematic uncertainty: the average photon count per pixel is often too small to establish a proper background pattern or model the systematic uncertainty in a timescale where the model remains invariant. We introduce two new techniques to improve detection sensitivity, which are designed for, but not limited to, a high-resolution coded-aperture system: a self-background modeling scheme which utilizes continuous scan or dithering operations, and a Poisson-statistics based probabilistic approach to evaluate the significance of source detection without subtraction in handling the background. We illustrate these new imaging analysis techniques in high resolution coded-aperture telescope using the data acquired by the wide-field hard X-ray telescope ProtoEXIST2 during a high-altitude balloon flight in fall 2012. We review the imaging sensitivity of ProtoEXIST2 during the flight, and demonstrate the performance of the new techniques using our balloon flight data in comparison with a simulated ideal Poisson background.

  8. High-contrast imager for Complex Aperture Telescopes (HiCAT). 4. Status and wavefront control development

    Science.gov (United States)

    Leboulleux, Lucie; N'Diaye, Mamadou; Riggs, A. J. E.; Egron, Sylvain; Mazoyer, Johan; Pueyo, Laurent; Choquet, Elodie; Perrin, Marshall D.; Kasdin, Jeremy; Sauvage, Jean-François; Fusco, Thierry; Soummer, Rémi

    2016-07-01

    Segmented telescopes are a possible approach to enable large-aperture space telescopes for the direct imaging and spectroscopy of habitable worlds. However, the increased complexity of their aperture geometry, due to their central obstruction, support structures and segment gaps, makes high-contrast imaging very challenging. The High-contrast imager for Complex Aperture Telescopes (HiCAT) was designed to study and develop solutions for such telescope pupils using wavefront control and starlight suppression. The testbed design has the flexibility to enable studies with increasing complexity for telescope aperture geometries starting with off-axis telescopes, then on-axis telescopes with central obstruction and support structures (e.g. the Wide Field Infrared Survey Telescope [WFIRST]), up to on-axis segmented telescopes e.g. including various concepts for a Large UV, Optical, IR telescope (LUVOIR), such as the High Definition Space Telescope (HDST). We completed optical alignment in the summer of 2014 and a first deformable mirror was successfully integrated in the testbed, with a total wavefront error of 13nm RMS over a 18mm diameter circular pupil in open loop. HiCAT will also be provided with a segmented mirror conjugated with a shaped pupil representing the HDST configuration, to directly study wavefront control in the presence of segment gaps, central obstruction and spider. We recently applied a focal plane wavefront control method combined with a classical Lyot coronagraph on HiCAT, and we found limitations on contrast performance due to vibration effect. In this communication, we analyze this instability and study its impact on the performance of wavefront control algorithms. We present our Speckle Nulling code to control and correct for wavefront errors both in simulation mode and on testbed mode. This routine is first tested in simulation mode without instability to validate our code. We then add simulated vibrations to study the degradation of contrast

  9. High-contrast imager for Complex Aperture Telescopes (HiCAT): testbed design and coronagraph developments

    Science.gov (United States)

    N'Diaye, Mamadou; Choquet, E.; Pueyo, L.; Elliot, E.; Perrin, M. D.; Wallace, J.; Anderson, R. E.; Carlotti, A.; Groff, T. D.; Hartig, G. F.; Kasdin, J.; Lajoie, C.; Levecq, O.; Long, C.; Macintosh, B.; Mawet, D.; Norman, C. A.; Shaklan, S.; Sheckells, M.; Sivaramakrishnan, A.; Soummer, R.

    2014-01-01

    We present a new high-contrast imaging testbed designed to provide complete solutions for wavefront sensing and control and starlight suppression with complex aperture telescopes (NASA APRA; Soummer PI). This includes geometries with central obstruction, support structures, and/or primary mirror segmentation. Complex aperture telescopes are often associated with large telescope designs, which are considered for future space missions. However, these designs makes high-contrast imaging challenging because of additional diffraction features in the point spread function. We present a novel optimization approach for the testbed optical and opto-mechanical design that minimizes the impact of both phase and amplitude errors from the wave propagation of testbed optics surface errors. This design approach allows us to define the specification for the bench optics, which we then compare to the manufactured parts. We discuss the testbed alignment and first results. We also present our coronagraph design for different testbed pupil shapes (AFTA or ATLAST), which involves a new method for the optimization of Apodized Pupil Lyot Coronagraphs (APLC).

  10. High-performance parallel image reconstruction for the New Vacuum Solar Telescope

    Science.gov (United States)

    Li, Xue-Bao; Liu, Zhong; Wang, Feng; Jin, Zhen-Yu; Xiang, Yong-Yuan; Zheng, Yan-Fang

    2015-06-01

    Many technologies have been developed to help improve spatial resolution of observational images for ground-based solar telescopes, such as adaptive optics (AO) systems and post-processing reconstruction. As any AO system correction is only partial, it is indispensable to use post-processing reconstruction techniques. In the New Vacuum Solar Telescope (NVST), a speckle-masking method is used to achieve the diffraction-limited resolution of the telescope. Although the method is very promising, the computation is quite intensive, and the amount of data is tremendous, requiring several months to reconstruct observational data of one day on a high-end computer. To accelerate image reconstruction, we parallelize the program package on a high-performance cluster. We describe parallel implementation details for several reconstruction procedures. The code is written in the C language using the Message Passing Interface (MPI) and is optimized for parallel processing in a multiprocessor environment. We show the excellent performance of parallel implementation, and the whole data processing speed is about 71 times faster than before. Finally, we analyze the scalability of the code to find possible bottlenecks, and propose several ways to further improve the parallel performance. We conclude that the presented program is capable of executing reconstruction applications in real-time at NVST.

  11. GAW - A very large field-of-view Imaging Atmospheric Cherenkov Telescope

    CERN Document Server

    Arruda, Luisa

    2010-01-01

    GAW (Gamma Air Watch) is a pathfinder experiment in the TeV range to test the feasibility of a new generation of Imaging Atmospheric Cherenkov Telescopes (IACT). It combines high flux sensitivity with large field-of-view (FoV=24deg x 24deg) using Fresnel lenses, stereoscopic observational approach and single-photon counting mode. This particular counting mode, in comparison with the usual charge integration one, allows the triggering of events with a smaller number of collected Cherenkov photons keeping a good signal/background separation. GAW is conceived as an array of three identical imaging telescopes with 2.13 m diameter placed at the vertices of an equilateral triangle of 80 m side. The telescope will be built at the Calar Alto Observatory site (Sierra de Los Filabres - Almeria Spain, 2168 m a.s.l.) and is a joint effort of research institutes in Italy, Portugal and Spain. The main characteristics of the experiment will be reported.

  12. Optimal strategies for observation of active galactic nuclei variability with Imaging Atmospheric Cherenkov Telescopes

    CERN Document Server

    Giomi, Matteo; Maier, Gernot

    2016-01-01

    Variable emission is one of the defining characteristic of active galactic nuclei (AGN). While providing precious information on the nature and physics of the sources, variability is often challenging to observe with time- and field-of-view-limited astronomical observatories such as Imaging Atmospheric Cherenkov Telescopes (IACTs). In this work, we address two questions relevant for the observation of sources characterized by AGN-like variability: what is the most time-efficient way to detect such sources, and what is the observational bias that can be introduced by the choice of the observing strategy when conducting blind surveys of the sky. Different observing strategies are evaluated using simulated light curves and realistic instrument response functions of the Cherenkov Telescope Array (CTA), a future gamma-ray observatory. We show that strategies that makes use of very small observing windows, spread over large periods of time, allows for a faster detection of the source, and are less influenced by the...

  13. The Katzman Automatic Imaging Telescope Gamma-Ray Burst Alert System, and Observations of GRB 020813

    CERN Document Server

    Li, W; Chornock, R; Jha, S; Li, Weidong; Filippenko, Alexei V.; Chornock, Ryan; Jha, Saurabh

    2003-01-01

    We present the technical details of the gamma-ray burst (GRB) alert system of the Katzman Automatic Imaging Telescope (KAIT) at Lick Observatory, and the successful observations of the GRB 020813 optical afterglow with this system. KAIT responds to GRB alerts robotically, interrupts its pre-arranged program, and takes a sequence of images for each GRB alert. A grid-imaging procedure is used to increase the efficiency of the early-time observations. Different sequences of images have been developed for different types of GRB alerts. With relatively fast telescope slew and CCD readout speed, KAIT can typically complete the first observation within 60 s after receiving a GRB alert, reaching a limiting magnitude of $\\sim 19$. Our reduction of the GRB 020813 data taken with KAIT shows that unfiltered magnitudes can be reliably transformed to a standard passband with a precision of $\\sim$5%, given that the color of the object is known. The GRB 020813 optical afterglow has an exceptionally slow early-time power-law ...

  14. Direct Imaging of Exoplanets, from very large to extremely large telescopes

    Science.gov (United States)

    Kasper, M.

    2015-10-01

    Presently, dedicated instruments at 8-m class telescopes (SPHERE for the VLT, GPI for Gemini) are about to discover and explore self-luminous giant planets by direct imaging and spectroscopy. In a decade, the next generation of 30m-40m ground-based Extremely Large Telescopes (ELTs) have the potential to dramatically enlarge the discovery space towards older giant planets seen in the reflected light and ultimately even a small number of rocky planets. In order to fulfill the demanding contrast requirements of a part in a million to a part in a billion at separations of one tenth of an arcsecond, the seeing limited PSF contrast must gradually be improved by eXtreme Adaptive optics (XAO), non-common path aberration compensation, coronagraphy, and science image post-processing. None of these steps alone is sufficient to leap the enormous contrast. High-contrast imaging (HCI) from the ground encompasses all those disciplines which are to be considered in a system approach. The presentation will introduce the principle of HCI and present the current implementation in the SPHERE, ESO's imager for giant exoplanets at the VLT. It will then discuss requirements and necessary R&D to reach the ultimate goal, observing terrestrial Exoplanets with the next generation of instruments for the ELTs.

  15. The 64 Mpixel wide field imager for the Wendelstein 2m Telescope: Design and Calibration

    CERN Document Server

    Kosyra, Ralf; Hopp, Ulrich; Lang-Bardl, Florian; Riffeser, Arno; Bender, Ralf; Seitz, Stella

    2014-01-01

    The Wendelstein Observatory of Ludwig Maximilians University of Munich has recently been upgraded with a modern 2m robotic telescope. One Nasmyth port of the telescope has been equipped with a wide-field corrector which preserves the excellent image quality (< 0.8" median seeing) of the site (Hopp et al. 2008) over a field of view of 0.7 degrees diameter. The available field is imaged by an optical imager (WWFI, the Wendelstein Wide Field Imager) built around a customized 2 $\\times$ 2 mosaic of 4k $\\times$ 4k 15 \\mu m e2v CCDs from Spectral Instruments. This paper provides an overview of the design and the WWFI's performance. We summarize the system mechanics (including a structural analysis), the electronics (and its electromagnetic interference (EMI) protection) and the control software. We discuss in detail detector system parameters, i.e. gain and readout noise, quantum efficiency as well as charge transfer efficiency (CTE) and persistent charges. First on sky tests yield overall good predictability of...

  16. Image degradation due to scattering effects in two-mirror telescopes

    Science.gov (United States)

    Harvey, James E.; Krywonos, Andrey; Peterson, Gary; Bruner, Marilyn

    2010-06-01

    Image degradation due to scattered radiation is a serious problem in many short-wavelength (x-ray and EUV) imaging systems. Most currently available image analysis codes require the scattering behavior [data on the bidirectional scattering distribution function (BSDF)] as input in order to calculate the image quality from such systems. Predicting image degradation due to scattering effects is typically quite computation-intensive. If using a conventional optical design and analysis code, each geometrically traced ray spawns hundreds of scattered rays randomly distributed and weighted according to the input BSDF. These scattered rays must then be traced through the system to the focal plane using nonsequential ray-tracing techniques. For multielement imaging systems even the scattered rays spawn more scattered rays at each additional surface encountered in the system. In this paper we describe a generalization of Peterson's analytical treatment of in-field stray light in multielement imaging systems. In particular, we remove the smooth-surface limitation that ignores the scattered-scattered radiation, which can be quite large for EUV wavelengths even for state-of-the-art optical surfaces. Predictions of image degradation for a two-mirror EUV telescope with the generalized Peterson model are then numerically validated with the much more computation-intensive ZEMAX® and ASAP® codes.

  17. Diffractive imaging analysis of large-aperture segmented telescope based on partial Fourier transform

    Science.gov (United States)

    Dong, Bing; Qin, Shun; Hu, Xinqi

    2013-09-01

    Large-aperture segmented primary mirror will be widely used in next-generation space-based and ground-based telescopes. The effects of intersegment gaps, obstructions, position and figure errors of segments, which are all involved in the pupil plane, on the image quality metric should be analyzed using diffractive imaging theory. Traditional Fast Fourier Transform (FFT) method is very time-consuming and costs a lot of memory especially in dealing with large pupil-sampling matrix. A Partial Fourier Transform (PFT) method is first proposed to substantially speed up the computation and reduce memory usage for diffractive imaging analysis. Diffraction effects of a 6-meter segmented mirror including 18 hexagonal segments are simulated and analyzed using PFT method. The influence of intersegment gaps and position errors of segments on Strehl ratio is quantitatively analyzed by computing the Point Spread Function (PSF). By comparing simulation results with theoretical results, the correctness and feasibility of PFT method is confirmed.

  18. High-Resolution Imaging in the Visible on Large Ground-Based Telescopes

    CERN Document Server

    Mackay, Craig; Crass, Jonathan; King, David L; Labadie, Lucas; González-Escélera, Víctor; Puga, Marta; Pérez-Garrido, Antonio; López, Roberto; Oscoz, Alejandro; Pérez-Prieto, Jorge A; Rodríguez-Ramos, Luis F; Velasco, Sergio; Villó, Isidro

    2014-01-01

    Lucky Imaging combined with a low order adaptive optics system has given the highest resolution images ever taken in the visible or near infrared of faint astronomical objects. This paper describes a new instrument that has already been deployed on the WHT 4.2m telescope on La Palma, with particular emphasis on the optical design and the predicted system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow virtually full sky coverage with faint natural guide stars. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.

  19. Hubble Space Telescope Optical Imaging of the Eroding Debris Disk HD 61005

    CERN Document Server

    Maness, H L; Peek, K M G; Chiang, E I; Scherer, K; Fitzgerald, M P; Graham, James R; Hines, D C; Schneider, G; Metchev, S A

    2009-01-01

    We present Hubble Space Telescope optical coronagraphic polarization imaging observations of the dusty debris disk HD 61005. The scattered light intensity image and polarization structure reveal a highly inclined disk with a clear asymmetric, swept back component, suggestive of significant interaction with the ambient interstellar medium. The combination of our new data with the published 1.1 micron discovery image shows that the grains are blue scattering with no strong color gradient as a function of radius, implying predominantly sub-micron sized grains. We investigate possible explanations that could account for the observed swept back, asymmetric morphology. Previous work has suggested that HD 61005 may be interacting with a cold, unusually dense interstellar cloud. However, limits on the intervening interstellar gas column density from an optical spectrum of HD 61005 in the Na I D lines render this possibility unlikely. Instead, HD 61005 may be embedded in a more typical warm, low-density cloud that int...

  20. The Mid-Infrared Instrument for the James Webb Space Telescope, III: MIRIM, The MIRI Imager

    CERN Document Server

    Bouchet, P; Lagage, P -O; Amiaux, J; Augueres, J -L; Bauwens, E; Blommaert, J A D L; Chen, C H; Detre, O H; Dicken, D; Dubreuil, D; Galdemard, Ph; Gastaud, R; Glasse, A; Gordon, K D; Gougnaud, F; Guillard, P; Justtanont, K; Krause, O; Leboeuf, D; Longval, Y; Martin, L; Mazy, E; Moreau, V; Olofsson, G; Ray, T P; Reess, J -M; Renotte, E; Ressler, M E; Ronayette, S; Salasca, S; Scheithauer, S; Sykes, J; Thelen, M P; Wells, M; Wright, D; Wright, G S

    2015-01-01

    In this article, we describe the MIRI Imager module (MIRIM), which provides broad-band imaging in the 5 - 27 microns wavelength range for the James Webb Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed view of 74"x113". The remainder of its nominal 113"x113" field is occupied by the coronagraphs and the low resolution spectrometer. We present the instrument optical and mechanical design. We show that the test data, as measured during the test campaigns undertaken at CEA-Saclay, at the Rutherford Appleton Laboratory, and at the NASA Goddard Space Flight Center, indicate that the instrument complies with its design requirements and goals. We also discuss the operational requirements (multiple dithers and exposures) needed for optimal scientific utilization of the MIRIM.

  1. High-contrast imaging testbed for Complex Aperture Telescopes (HiCAT) for future space missions

    Science.gov (United States)

    Choquet, E.; N'Diaye, M.; Pueyo, L.; Elliot, E.; Perrin, M. D.; Wallace, J. K.; Anderson, R.; Carlotti, A.; Groff, T.; Hartig, G.; Kasdin, N. J.; Lajoie, C.; Levecq, O.; Long, C.; Mawet, D.; Macintosh, B.; Norman, C.; Shaklan, S.; Sheckells, M.; Sivaramakrishnan, An; Soummer, R.

    2014-03-01

    Searching for nearby habitable worlds with direct imaging and spectroscopy will require a telescope large enough to provide angular resolution and sensitivity to planets around a significant sample of stars. Segmented telescopes are a compelling option to obtain such large apertures. However, these designs have a complex geometry (central obstruction, support structures, segmentation) that makes high contrast imaging challenging. We are developing a new high-contrast imaging testbed at STScI to provide an integrated solution for wavefront control and starlight suppression on complex aperture geometries. We present a novel optimization approach for the testbed optical and opto-mechanical design that minimizes the impact of both phase and amplitude errors from the wave propagation of testbed optics surface errors. This design approach allows us to define the specification for the bench optics, which we then compare to the manufactured parts. We discuss the testbed alignment and first results. We also present our coronagraph design for different testbed pupil shapes (AFTA or ATLAST), which involves a new method for the optimization of Apodized Pupil Lyot Coronagraphs (APLC).

  2. The SWAP EUV Imaging Telescope. Part II: In-flight Performance and Calibration

    CERN Document Server

    Halain, Jean-Philippe; Seaton, Dan; Nicula, Bogdan; De Groof, Anik; Mierla, Marilena; Mazzoli, Alexandra; Defise, Jean-Marc; Rochus, Pierre

    2012-01-01

    The Sun Watcher with Active Pixel System detector and Image Processing (SWAP) telescope was launched on 2 November 2009 onboard the ESA PROBA2 technological mission and has acquired images of the solar corona every one - two minutes for more than two years. The most important technological developments included in SWAP are a radiation-resistant CMOS-APS detector and a novel onboard data-prioritization scheme. Although such detectors have been used previously in space, they have never been used for long-term scientific observations on orbit. Thus SWAP requires a careful calibration to guarantee the science return of the instrument. Since launch we have regularly monitored the evolution of SWAP detector response in-flight to characterize both its performance and degradation over the course of the mission. These measurements are also used to reduce detector noise in calibrated images (by subtracting dark-current). Since accurate measurements of detector dark-current require large telescope off-points, we have al...

  3. Monte-Carlo simulations of the expected imaging performance of the EXIST high-energy telescope

    CERN Document Server

    Vadawale, S V; Grindlay, J E; Skinner, G K

    2005-01-01

    EXIST is being studied as the Black Hole Finder Probe, one of the 3 Einstein Probe missions under NASA's Beyond Einstein program. The major science goals for EXIST include highly sensitive full-sky hard X-ray survey in a very wide energy band of 5-600 keV. The scientific requirements of wide energy band (10-600 keV for the High Energy Telescope considered for EXIST) and large field of view (approximately 130 deg x 60 deg in the current design, incorporating an array of 18 contiguous very large area coded aperture telescopes) presents significant imaging challenges. The requirement of achieving high imaging sensitivity puts stringent limits on the uniformity and knowledge of systematics for the detector plane. In order to accomplish the ambitious scientific requirements of EXIST, it is necessary to implement many novel techniques. Here we present the initial results of our extensive Monte-Carlo simulations of coded mask imaging for EXIST to estimate the performance degradation due to various factors affecting ...

  4. Coronagraphic Imager with Adaptive Optics (CIAO) for the Subaru 8.2m Telescope

    Science.gov (United States)

    Tamura, M.; Suto, H.; Murakawa, K.; Hayashi, S.; Kaifu, N.; Itoh, Y.; Fukagawa, M.; Oasa, Y.; Naoi, T.

    2001-05-01

    We describe a near-infrared coronagraphic camera built for use with the Subaru 8.2m telescope and its adaptive optics system. This instrument, CIAO, aims to obtain high-resolution (0.06 arcsec at 2 micron) images of faint objects in close vicinity of bright objects at near-infrared wavelengths. The coronagraphic optics are all cooled. Occulting masks whose diameter ranges from 0.1 to 3 arcsec and several types of Lyot stops are selectable. Standard broad-band imaging and a number of narow-band imaging are possible with or without coronagraph, with two pixel scales of 22 mas/pixel and 11 mas/pixel. Low resolution coronagraphic grism spectroscopy is also available. CIAO utilize one ALLADIN II (1024x1024 InSb) scince-grade array detector manufactured by Raytheon, covering the wavelengths from 1 to 5 micron. CIAO will be very useful for studies of companion brown dwarfs and extra-solar planets, circumstelar disks around both young stelar obejcts and main-sequence stars, jets and outflows from both young stars and evolved stars, circumnuclear regions around AGNs, and host galaxies of QSOs. We also present preliminary results from the first commissioning run with adaptive optics at the Subaru telescope.

  5. Hubble Space Telescope Images of the Ultraluminous Supernova Remnant Complex in NGC 6946

    Science.gov (United States)

    Blair, William P.; Fesen, Robert A.; Schlegel, Eric M.

    2001-03-01

    We present Hubble Space Telescope (HST) narrow-passband Hα and [S II] images and broadband continuum images of the region around an extremely luminous optical and X-ray supernova remnant complex in the spiral galaxy NGC 6946. These images, obtained with the PC1 CCD of the Wide Field Planetary Camera 2, show a circular, limb-brightened shell of diameter 0.35" [9 d/(5.1 Mpc) pc] superposed on the edge of a larger, lower surface brightness elliptical shell (1.4"×0.8", or ~=34 pc×20 pc). The HST images allow us to see that the [S II]:Hα ratio remains high across both shells, indicating that both are collisionally heated. A brightening of the Hα and [S II] line emission arises on the eastern side of the smaller shell, where it is apparently interacting with the western edge of the larger shell. Our HST V image includes the nebula's strong [O III] λ5007 emission in the blue wing of the filter, providing a glimpse at the [O III] nebular morphology. The smaller shell looks similar, but the extended structure looks sharper than in Hα and [S II] images, reminiscent of a cavity wall. The HST and ground-based continuum images show the brightest members of the underlying and adjacent stellar population, indicating the presence of massive OB stars in and near the region. A new optical ground-based spectrum confirms that the [N II]:Hα ratio is enhanced in the region, consistent with mass loss from massive stars. These data show an average ([S II] λλ6716, 6731):Hα ratio across both shells of ~1 and a mean electron density of ~400 cm-3, indicating preshock densities of order 10 cm-3. We interpret this nebular morphology and supporting information as an indication of multiple supernova explosions in relatively close temporal and spatial proximity. We discuss possible scenarios for this complex region and the reasons for its extreme luminosity. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is

  6. Wide Field Camera 3: A Powerful New Imager for the Hubble Space Telescope

    Science.gov (United States)

    Kimble, Randy

    2008-01-01

    Wide Field Camera 3 (WFC3) is a powerful UV/visible/near-infrared camera in development for installation into the Hubble Space Telescope during upcoming Servicing Mission 4. WFC3 provides two imaging channels. The UVIS channel incorporates a 4096 x 4096 pixel CCD focal plane with sensitivity from 200 to 1000 nm. The IR channel features a 1024 x 1024 pixel HgCdTe focal plane covering 850 to 1700 nm. We report here on the design of the instrument, the performance of its flight detectors, results of the ground test and calibration program, and the plans for the Servicing Mission installation and checkout.

  7. First Images from HERO: A Hard-X-Ray Focusing Telescope

    Science.gov (United States)

    Ramsey, Brian D.; Alexander, Cheryl D.; Apple, Jeff A.; Benson, Carl M.; Dietz, Kurtis L.; Elsner, Ronald F.; Engelhaupt, Darell E.; Ghosh, Kajal K.; Kolodziejczak, Jeffery J.; ODell, Stephen L.; Whitaker, Ann F. (Technical Monitor)

    2001-01-01

    We are developing a balloon-borne hard-x-ray telescope that utilizes grazing incidence optics. Termed HERO, for High-Energy Replicated Optics, the instrument will provide unprecented sensitivity in the hard-x-ray region and will achieve milliCrab-level sensitivity in a typical 3-hour balloon-flight observation and 50 microCrab sensitivity on ultra-long-duration flights. A recent proof-of-concept flight, featuring a small number of mirror shells captured the first focused hard-x-ray images of galactic x-ray sources. Full details of the payload, its expected future performance and its recent measurements are provided.

  8. Spitzer Space Telescope Infrared Imaging and Spectroscopy of the Crab Nebula

    CERN Document Server

    Temim, T; Woodward, C E; Roellig, T L; Smith, N; Rudnick, L R; Polomski, E F; Davidson, K; Yuen, L; Onaka, T; Temim, Tea; Gehrz, Robert D.; Woodward, Charles E.; Roellig, Thomas L.; Smith, Nathan; Rudnick, Lawrence R.; Polomski, Elisha F.; Davidson, Kris; Yuen, Lunming; Onaka, Takashi

    2006-01-01

    We present 3.6, 4.5, 5.8, 8.0, 24, and 70 micron images of the Crab Nebula obtained with the Spitzer Space Telescope IRAC and MIPS cameras, Low- and High-resolution Spitzer IRS spectra of selected positions within the nebula, and a near-infrared ground-based image made in the light of [Fe II]1.644 micron. The 8.0 micron image, made with a bandpass that includes [Ar II]7.0 micron, resembles the general morphology of visible H-alpha and near-IR [Fe II] line emission, while the 3.6 and 4.5 micron images are dominated by continuum synchrotron emission. The 24 micron and 70 micron images show enhanced emission that may be due to line emission or the presence of a small amount of warm dust in the nebula on the order of less than 1% of a solar mass. The ratio of the 3.6 and 4.5 micron images reveals a spatial variation in the synchrotron power law index ranging from approximately 0.3 to 0.8 across the nebula. Combining this information with optical and X-ray synchrotron images, we derive a broadband spectrum that re...

  9. Combined microscopies study of the C-contamination induced by extreme-ultraviolet radiation: A surface-dependent secondary-electron-based model

    Science.gov (United States)

    Prezioso, S.; Donarelli, M.; Bisti, F.; Palladino, L.; Santucci, S.; Spadoni, S.; Avaro, L.; Liscio, A.; Palermo, V.; Ottaviano, L.

    2012-05-01

    SiO2 and Al2O3 surfaces exposed to periodically modulated extreme ultraviolet (EUV) light (λ = 46.9 nm) have been investigated at the μm scale by optical microscopy, scanning electron microscopy, scanning Auger microscopy, atomic force microscopy, and Kelvin probe force microscopy. The formation of a carbon contamination layer preserving the same periodical modulation of the EUV dose has been observed. The mechanisms of hydrocarbon molecules deposition have been studied with the help of correlation plots between the modulated Auger signal and the corresponding EUV dose. A surface-dependent secondary-electron-based model has been proposed.

  10. Combined microscopies study of the C-contamination induced by extreme-ultraviolet radiation: A surface-dependent secondary-electron-based model

    Energy Technology Data Exchange (ETDEWEB)

    Prezioso, S.; Donarelli, M.; Bisti, F.; Palladino, L.; Santucci, S.; Ottaviano, L. [Dip. di Fisica, Universita dell' Aquila, Via Vetoio, 67100 L' Aquila (Italy); Spadoni, S.; Avaro, L. [Micron, Process R and D, Via C. Olivetti 2, 20864 Agrate Brianza (Italy); Liscio, A.; Palermo, V. [CNR-ISOF, Via Gobetti 101, 40129 Bologna (Italy)

    2012-05-14

    SiO{sub 2} and Al{sub 2}O{sub 3} surfaces exposed to periodically modulated extreme ultraviolet (EUV) light ({lambda} = 46.9 nm) have been investigated at the {mu}m scale by optical microscopy, scanning electron microscopy, scanning Auger microscopy, atomic force microscopy, and Kelvin probe force microscopy. The formation of a carbon contamination layer preserving the same periodical modulation of the EUV dose has been observed. The mechanisms of hydrocarbon molecules deposition have been studied with the help of correlation plots between the modulated Auger signal and the corresponding EUV dose. A surface-dependent secondary-electron-based model has been proposed.

  11. Record high extreme-ultraviolet efficiency at near-normal incidence from a multilayer-coated polymer-overcoated blazed ion-etched holographic grating

    Science.gov (United States)

    Kowalski, M. P.; Cruddace, R. G.; Heidemann, K. F.; Lenke, R.; Kierey, H.; Barbee, T. W., Jr.; Hunter, W. R.

    2004-12-01

    We have measured the extreme-ultraviolet (EUV) efficiency of a polymer-overcoated blazed ion-etched holographic test grating. The grating had a magnetron-sputtered Mo2C /Si multilayer coating matched to the grating blaze angle of 2.78°. At an angle of incidence of 5.6° and a wavelength of 15.79 nm, the measured efficiency peaks in the second outside order at 29.9%. The derived groove efficiency is 53.0%. To the best of our knowledge these are the highest values obtained yet at EUV wavelengths from a holographic ion-etched blazed grating.

  12. Harmonium: A pulse preserving source of monochromatic extreme ultraviolet (30–110 eV) radiation for ultrafast photoelectron spectroscopy of liquids

    OpenAIRE

    2016-01-01

    A tuneable repetition rate extreme ultraviolet source (Harmonium) for time resolved photoelectron spectroscopy of liquids is presented. High harmonic generation produces 30-110 eV photons, with fluxes ranging from similar to 2 x 10(11) photons/s at 36 eV to similar to 2 x 10(8) photons/s at 100 eV. Four different gratings in a time-preserving grating monochromator provide either high energy resolution (0.2 eV) or high temporal resolution (40 fs) between 30 and 110 eV. Laser assisted photoemis...

  13. Super-resolution Polarimetric Imaging of Black Holes using the Event Horizon Telescope

    Science.gov (United States)

    Pleau, Mollie; Akiyama, Kazunori; Fish, Vincent L.

    2017-01-01

    Black holes are thought to reside in the centers of many galaxies; however, due to their diminutive size, we have yet to directly detect and image a black hole. The Event Horizon Telescope (EHT), a global array for 1.3mm very long baseline interferometry (VLBI), has been designed to observe and image the supermassive black hole in the center of the Milky Way (Sagittarius A*), as well as the one in the center of the nearby giant elliptical galaxy M87. The nominal resolution of the EHT is around 30 μas, comparable to the size of the black hole’s event horizon. For this reason, we require super-resolution to accurately reconstruct images in total intensity and linear polarization. High fidelity polarimetric imaging can be used to test general relativity and to characterize the magnetic field structure surrounding black holes, which is important for understanding its role in mediating the innermost accretion and outflow region. We employ new sparse imaging techniques based on compressed sensing for linear polarimetry. Using synthetic data of M87 observations with the EHT, we find that our new techniques improve upon the standard CLEAN by a factor of ten regardless of resolution, as measured by the differences in mean squared error (MSE). We conclude that compressed sensing proves to be an effective method for linear polarimetric imaging.

  14. The Technical Performance of the HEGRA System of Imaging Air Cherenkov Telescopes

    CERN Document Server

    Pühlhofer, G; Götting, N; Heusler, A; Horns, D; Kohnle, A; Lampeitl, H; Panter, M; Tluczykont, M; Aharonian, F A; Akhperjanian, A G; Beilicke, M; Bernlöhr, K; Borst, H G; Bojahr, H; Coarasa, T; Contreras, J L; Cortina, J; Denninghoff, S; Fonseca, M V; Girma, M; Heinzelmann, G; Hermann, G; Hofmann, W; Jung, I; Kankanyan, R; Kestel, M; Konopelko, A; Kornmeyer, H; Kranich, D; López, M; Lorenz, E; Lucarelli, F; Mang, O; Meyer, H; Mirzoyan, R; Moralejo, A; Oña-Wilhelmi, E; Plyasheshnikov, A V; De los Reyes, R; Rhode, W; Ripken, J; Rowell, G; Sahakian, V V; Samorski, M; Schilling, M; Siems, M; Sobzynska, D; Stamm, W; Vitale, V; Völk, H J; Wiedner, C A

    2003-01-01

    Between early 1997 and late 2002, the HEGRA collaboration operated a stereoscopic system of 4 (later 5) imaging atmospheric Cherenkov telescopes. In this paper we present the calibration schemes which were developed for the system, and report on the performance of the detector over the years. In general, the telescope system was very well understood, regarding both the absolute calibration and the slight changes in performance over the years. The system had an energy threshold of 500 GeV for observations at zenith and under optimum detector conditions. With the corresponding calibration schemes, a systematic accuracy of 15 percent on the absolute energy scale has been achieved. The continuous sensitivity monitoring provided a relative accuracy of a few percent, and showed that the threshold did not exceed 600 GeV throughout the entire operation time. The readout electronics and the imaging quality of the dishes were well monitored and stable. The absolute pointing had an accuracy of at least 25 arcsec; this n...

  15. Jupiter's Upper Atmospheric Winds Revealed in Ultraviolet Images by Hubble Telescope

    Science.gov (United States)

    1994-01-01

    These four NASA Hubble Space Telescope images of Jupiter, as seen in visible (violet) and far-ultraviolet (UV) wavelengths, show the remarkable spreading of the clouds of smoke and dust thrown into the atmosphere after the impacts of the fragments of comet P/Shoemaker-Levy 9. These dark regions provide the only information ever obtained on the wind direction and speed in Jupiter's upper atmosphere.TOP Three impact sites appear as dark smudges lined up along Jupiter's southern hemisphere (from left to right, sites C, A, and E). This pair of images was obtained on 17 July, several hours after the E impact. These 3 impact sites appear strikingly darker in the far-ultraviolet images to the right. This is because the smoke and dust rising from the fireballs absorbs UV light more strongly than violet light, so that the clouds appear both darker and larger in the UV images. Apparently, the fireball and plume threw large amounts of material completely above the atmosphere. This material diffused back down through the atmosphere with the smaller and lighter particles suspended at high altitudes.BOTTOM Hubble's view of the same hemisphere of Jupiter 12-13 days later shows that the smoke and dust have now been spread mainly in the east/west direction by the prevailing winds at the altitude where the dark material is suspended or 'floating' in the atmosphere.HST shows that winds in Jupiter's upper atmosphere carry the high altitude smoke and dust in different directions than in the lower atmosphere. For example, the UV image shows a fainter cloud near 45 deg. south latitude, which does not appear in the violet image. The fainter cloud may be due to high altitude material which is drifting with the upper atmospheric winds to the north away from the polar regions. However, in the left-hand impact regions the clouds being observed are lower in the atmosphere where there is apparently no such northerly wind.The violet images show the Great Red Spot, on the eastern (right) limb

  16. Low Frequency Flats for Imaging Cameras on the Hubble Space Telescope

    Science.gov (United States)

    Kossakowski, Diana; Avila, Roberto J.; Borncamp, David; Grogin, Norman A.

    2017-01-01

    We created a revamped Low Frequency Flat (L-Flat) algorithm for the Hubble Space Telescope (HST) and all of its imaging cameras. The current program that makes these calibration files does not compile on modern computer systems and it requires translation to Python. We took the opportunity to explore various methods that reduce the scatter of photometric observations using chi-squared optimizers along with Markov Chain Monte Carlo (MCMC). We created simulations to validate the algorithms and then worked with the UV photometry of the globular cluster NGC6681 to update the calibration files for the Advanced Camera for Surveys (ACS) and Solar Blind Channel (SBC). The new software was made for general usage and therefore can be applied to any of the current imaging cameras on HST.

  17. New Hubble Space Telescope imaging of the counterparts to six ultraluminous X-ray sources

    CERN Document Server

    Roberts, T P; Goad, M R

    2008-01-01

    We report the results of new Hubble Space Telescope imaging of the positions of six ultraluminous X-ray sources (ULXs). Using images in three ACS filters we detect good candidate counterparts to four out of six ULXs, with one more possible detection, and observed magnitudes in the range m ~ 22 - 26 in the F606W filter. The extinction-corrected colours and absolute magnitudes vary from source to source, even after correcting for additional extinction in the host galaxy, and only one counterpart is readily explained as an OB star. Nevertheless, these counterparts are decent candidates for future follow-up in pursuit of dynamical mass constraints on the likely black holes powering these sources.

  18. Hubble Space Telescope STIS observations of GRB 000301C: CCD imaging and near-ultraviolet MAMA spectroscopy

    DEFF Research Database (Denmark)

    Smette, A.; Fruchter, A.S.; Gull, T.R.

    2001-01-01

    We present Space Telescope Imaging Spectrograph observations of the optical transient (OT) counterpart of the c-ray burster GRB 000301C obtained 5 days after the burst, on 2000 March 6. CCD clear-aperture imaging reveals a R similar or equal to 21.50 +/- 0.15 source with no apparent host galaxy. ...

  19. Hubble Space Telescope STIS Observations of GRB 000301C: CCD Imaging and Near-Ultraviolet MAMA Spectroscopy

    NARCIS (Netherlands)

    Smette, A.; Fruchter, A.S.; Gull, Th.R.; Sahu, K.C.; Petro, L.; Ferguson, H.; Rhoads, J.; Lindler, D.J.; Wijers, R.A.M.J.

    2001-01-01

    We present Space Telescope Imaging Spectrograph observations of the optical transient (OT) counterpart of the gamma-ray burster GRB 000301C obtained 5 days after the burst, on 2000 March 6. CCD clear-aperture imaging reveals a R~=21.50+/-0.15 source with no apparent host galaxy. An 8000 s, 1150

  20. Hubble Space Telescope STIS Observations of GRB 000301C: CCD Imaging and Near-Ultraviolet MAMA Spectroscopy

    NARCIS (Netherlands)

    Smette, A.; Fruchter, A.S.; Gull, Th.R.; Sahu, K.C.; Petro, L.; Ferguson, H.; Rhoads, J.; Lindler, D.J.; Wijers, R.A.M.J.

    2001-01-01

    We present Space Telescope Imaging Spectrograph observations of the optical transient (OT) counterpart of the gamma-ray burster GRB 000301C obtained 5 days after the burst, on 2000 March 6. CCD clear-aperture imaging reveals a R~=21.50+/-0.15 source with no apparent host galaxy. An 8000 s, 1150 Å

  1. Imaging Analysis of the Hard X-ray Telescope ProtoEXIST2 and New Techniques for High Resolution Coded Aperture Telescopes

    CERN Document Server

    Hong, Jaesub; Grindlay, Jonathan; Barthelmy, Scott

    2016-01-01

    Wide-field (> 100 deg$^2$) hard X-ray coded-aperture telescopes with high angular resolution (< 2') will enable a wide range of time domain astrophysics. For instance, transient sources such as gamma-ray bursts can be precisely localized without assistance of secondary focusing X-ray telescopes to enable rapid followup studies. On the other hand, high angular resolution in coded-aperture imaging introduces a new challenge in handling the systematic uncertainty: average photon count per pixel is often too small to establish a proper background pattern or model the systematic uncertainty in a time scale where the model remains invariant. We introduce two new techniques to improve detection sensitivity, which are designed for, but not limited to high resolution coded-aperture system: a self-background modeling scheme which utilizes continuous scan or dithering operations, and a Poisson-statistics based probabilistic approach to evaluate the significance of source detection without subtraction in handling the ...

  2. The Deep Blue Color of HD189733b: Albedo Measurements with Hubble Space Telescope/Space Telescope Imaging Spectrograph at Visible Wavelengths

    CERN Document Server

    Evans, Thomas M; Sing, David K; Aigrain, Suzanne; Barstow, Joanna K; Désert, Jean-Michel; Gibson, Neale; Heng, Kevin; Knutson, Heather A; Etangs, Alain Lecavelier des

    2013-01-01

    We present a secondary eclipse observation for the hot Jupiter HD189733b across the wavelength range 290-570nm made using the Space Telescope Imaging Spectrograph on the Hubble Space Telescope. We measure geometric albedos of Ag = 0.40 \\pm 0.12 across 290-450nm and Ag < 0.12 across 450-570nm at 1-sigma confidence. The albedo decrease toward longer wavelengths is also apparent when using six wavelength bins over the same wavelength range. This can be interpreted as evidence for optically thick reflective clouds on the dayside hemisphere with sodium absorption suppressing the scattered light signal beyond ~450nm. Our best-fit albedo values imply that HD189733b would appear a deep blue color at visible wavelengths.

  3. A Generic and Efficient E-field Parallel Imaging Correlator for Next-Generation Radio Telescopes

    Science.gov (United States)

    Thyagarajan, Nithyanandan; Beardsley, Adam P.; Bowman, Judd D.; Morales, Miguel F.

    2017-05-01

    Modern radio telescopes are favouring densely packed array layouts with large numbers of antennas (NA ≳ 1000). Since the complexity of traditional correlators scales as O(N_A^2), there will be a steep cost for realizing the full imaging potential of these powerful instruments. Through our generic and efficient E-field Parallel Imaging Correlator (epic), we present the first software demonstration of a generalized direct imaging algorithm, namely the Modular Optimal Frequency Fourier imager. Not only does it bring down the cost for dense layouts to O(N_A log _2N_A) but can also image from irregular layouts and heterogeneous arrays of antennas. epic is highly modular, parallelizable, implemented in object-oriented python, and publicly available. We have verified the images produced to be equivalent to those from traditional techniques to within a precision set by gridding coarseness. We have also validated our implementation on data observed with the Long Wavelength Array (LWA1). We provide a detailed framework for imaging with heterogeneous arrays and show that epic robustly estimates the input sky model for such arrays. Antenna layouts with dense filling factors consisting of a large number of antennas such as LWA, the Square Kilometre Array, Hydrogen Epoch of Reionization Array, and Canadian Hydrogen Intensity Mapping Experiment will gain significant computational advantage by deploying an optimized version of epic. The algorithm is a strong candidate for instruments targeting transient searches of fast radio bursts as well as planetary and exoplanetary phenomena due to the availability of high-speed calibrated time-domain images and low output bandwidth relative to visibility-based systems.

  4. A Generic and Efficient E-field Parallel Imaging Correlator for Next-Generation Radio Telescopes

    Science.gov (United States)

    Thyagarajan, Nithyanandan; Beardsley, Adam P.; Bowman, Judd D.; Morales, Miguel F.

    2017-01-01

    Modern radio telescopes are favouring densely packed array layouts with large numbers of antennas (NA ≳ 1000). Since the complexity of traditional correlators scales as O(N_{A}^2), there will be a steep cost for realizing the full imaging potential of these powerful instruments. Through our generic and efficient E-field Parallel Imaging Correlator (EPIC), we present the first software demonstration of a generalized direct imaging algorithm, namely, the Modular Optimal Frequency Fourier (MOFF) imager. Not only does it bring down the cost for dense layouts to O(N_{A} log _2N_{A}) but can also image from irregular layouts and heterogeneous arrays of antennas. EPIC is highly modular, parallelizable, implemented in object-oriented Python, and publicly available. We have verified the images produced to be equivalent to those from traditional techniques to within a precision set by gridding coarseness. We have also validated our implementation on data observed with the Long Wavelength Array (LWA1). We provide a detailed framework for imaging with heterogeneous arrays and show that EPIC robustly estimates the input sky model for such arrays. Antenna layouts with dense filling factors consisting of a large number of antennas such as LWA, the Square Kilometre Array, Hydrogen Epoch of Reionization Array, and Canadian Hydrogen Intensity Mapping Experiment will gain significant computational advantage by deploying an optimized version of EPIC. The algorithm is a strong candidate for instruments targeting transient searches of Fast Radio Bursts (FRB) as well as planetary and exoplanetary phenomena due to the availability of high-speed calibrated time-domain images and low output bandwidth relative to visibility-based systems.

  5. SNAP telescope

    Energy Technology Data Exchange (ETDEWEB)

    Lampton, Michael L.; Akerlof, C.W.; Aldering, G.; Amanullah, R.; Astier, P.; Barrelet, E.; Bebek, C.; Bergstrom, L.; Bercovitz, J.; Bernstein, G.; Bester, M.; Bonissent, A.; Bower, C.; Carithers Jr., W.C.; Commins, E.D.; Day, C.; Deustua, S.E.; DiGennaro, R.; Ealet, A.; Ellis,R.S.; Eriksson, M.; Fruchter, A.; Genat, J.-F.; Goldhaber, G.; Goobar,A.; Groom, D.; Harris, S.E.; Harvey, P.R.; Heetderks, H.D.; Holland,S.E.; Huterer, D.; Karcher, A.; Kim, A.G.; Kolbe, W.; Krieger, B.; Lafever, R.; Lamoureux, J.; Levi, M.E.; Levin, D.S.; Linder, E.V.; Loken,S.C.; Malina, R.; Massey, R.; McKay, T.; McKee, S.P.; Miquel, R.; Mortsell, E.; Mostek, N.; Mufson, S.; Musser, J.; Nugent, P.; Oluseyi,H.; Pain, R.; Palaio, N.; Pankow, D.; Perlmutter, S.; Pratt, R.; Prieto,E.; Refregier, A.; Rhodes, J.; Robinson, K.; Roe, N.; Sholl, M.; Schubnell, M.; Smadja, G.; Smoot, G.; Spadafora, A.; Tarle, G.; Tomasch,A.; von der Lippe, H.; Vincent, R.; Walder, J.-P.; Wang, G.; Wang, G.

    2002-07-29

    The SuperNova/Acceleration Probe (SNAP) mission will require a two-meter class telescope delivering diffraction limited images spanning a one degree field in the visible and near infrared wavelength regime. This requirement, equivalent to nearly one billion pixel resolution, places stringent demands on its optical system in terms of field flatness, image quality, and freedom from chromatic aberration. We discuss the advantages of annular-field three-mirror anastigmat (TMA) telescopes for applications such as SNAP, and describe the features of the specific optical configuration that we have baselined for the SNAP mission. We discuss the mechanical design and choice of materials for the telescope. Then we present detailed ray traces and diffraction calculations for our baseline optical design. We briefly discuss stray light and tolerance issues, and present a preliminary wavefront error budget for the SNAP Telescope. We conclude by describing some of tasks to be carried out during the upcoming SNAP research and development phase.

  6. Development and performance of the Fast Neutron Imaging Telescope for SNM detection

    Science.gov (United States)

    Ryan, James M.; Bravar, Ulisse; Flückiger, Erwin O.; Macri, John R.; McConnell, Mark L.; Pirard, Benoit; Woolf, Richard S.

    2008-04-01

    FNIT (the Fast Neutron Imaging Telescope), a detector with both imaging and energy measurement capabilities, sensitive to neutrons in the range 0.8-20 MeV, was initially conceived to study solar neutrons as a candidate design for the Inner Heliosphere Sentinel (IHS) spacecraft of NASA's Solar Sentinels program and successively reconfigured to locate fission neutron sources. By accurately identifying the position of the source with imaging techniques and reconstructing the Watt spectrum of fission neutrons, FNIT can detect samples of special nuclear material (SNM), including heavily shielded and masked ones. The detection principle is based on multiple elastic neutron-proton scatterings in organic scintillators. By reconstructing n-p event locations and sequence and measuring the recoil proton energies, the direction and energy spectrum of the primary neutron flux can be determined and neutron sources identified. We describe the design of the FNIT prototype and present its energy reconstruction and imaging performance, assessed by exposing FNIT to a neutron beam and to a Pu fission neutron source.

  7. The (new) Mid-Infrared Spectrometer and Imager (MIRSI) for the NASA Infrared Telescope Facility

    Science.gov (United States)

    Hora, Joseph L.; Trilling, David; Mommert, Michael; Smith, Howard A.; Moskovitz, Nicholas; Marscher, Alan P.; Tokunaga, Alan; Bergknut, Lars; Bonnet, Morgan; Bus, Schelte J.; Connelly, Michael; Rayner, John; Watanabe, Darryl

    2015-11-01

    The Mid-Infrared Spectrometer and Imager (MIRSI) was developed at Boston University and has been in use since 2002 on the Infrared Telescope Facility (IRTF), making observations of asteroids, planets, and comets in the 2 - 25 μm wavelength range. Recently the instrument has been unavailable due to electronics issues and the high cost of supplying liquid helium on Maunakea. We have begun a project to upgrade MIRSI to a cryocooler-based system with new array readout electronics and a dichroic and optical camera to simultaneously image the science field for image acquisition and optical photometry. The mechanical cryocooler will enable MIRSI to be continuously mounted on the IRTF multiple instrument mount (MIM) along with the other facility instruments, making it available to the entire community for multi-wavelength imaging and spectral observations. We will propose to use the refurbished MIRSI to measure the 10 μm flux from Near Earth Objects (NEOs) and determine their diameters and albedos through the use of a thermal model. We plan to observe up to 750 NEOs over the course of a three year survey, most of whose diameters will be under 300 meters. Here we present an overview of the MIRSI upgrade and give the current status of the project.This work is funded by the NASA Solar System Observations/NEOO program.

  8. ULTRASPEC: a high-speed imaging photometer on the 2.4-m Thai National Telescope

    CERN Document Server

    Dhillon, V S; Atkinson, D C; Bezawada, N; Bours, M C P; Copperwheat, C M; Gamble, T; Hardy, L K; Hickman, R D H; Irawati, P; Ives, D J; Kerry, P; Leckngam, A; Littlefair, S P; McLay, S A; O'Brien, K; Peacocke, P T; Poshyachinda, S; Richichi, A; Soonthornthum, B; Vick, A

    2014-01-01

    ULTRASPEC is a high-speed imaging photometer mounted permanently at one of the Nasmyth focii of the 2.4-m Thai National Telescope (TNT) on Doi Inthanon, Thailand's highest mountain. ULTRASPEC employs a 1024x1024 pixel frame-transfer, electron-multiplying CCD (EMCCD) in conjunction with re-imaging optics to image a field of 7.7'x7.7' at (windowed) frame rates of up to ~200 Hz. The EMCCD has two outputs - a normal output that provides a readout noise of 2.3 e- and an avalanche output that can provide essentially zero readout noise. A six-position filter wheel enables narrow-band and broad-band imaging over the wavelength range 330-1000 nm. The instrument saw first light on the TNT in November 2013 and will be used to study rapid variability in the Universe. In this paper we describe the scientific motivation behind ULTRASPEC, present an outline of its design and report on its measured performance on the TNT.

  9. Optimal strategies for observation of active galactic nuclei variability with Imaging Atmospheric Cherenkov Telescopes

    Science.gov (United States)

    Giomi, Matteo; Gerard, Lucie; Maier, Gernot

    2016-07-01

    Variable emission is one of the defining characteristic of active galactic nuclei (AGN). While providing precious information on the nature and physics of the sources, variability is often challenging to observe with time- and field-of-view-limited astronomical observatories such as Imaging Atmospheric Cherenkov Telescopes (IACTs). In this work, we address two questions relevant for the observation of sources characterized by AGN-like variability: what is the most time-efficient way to detect such sources, and what is the observational bias that can be introduced by the choice of the observing strategy when conducting blind surveys of the sky. Different observing strategies are evaluated using simulated light curves and realistic instrument response functions of the Cherenkov Telescope Array (CTA), a future gamma-ray observatory. We show that strategies that makes use of very small observing windows, spread over large periods of time, allows for a faster detection of the source, and are less influenced by the variability properties of the sources, as compared to strategies that concentrate the observing time in a small number of large observing windows. Although derived using CTA as an example, our conclusions are conceptually valid for any IACTs facility, and in general, to all observatories with small field of view and limited duty cycle.

  10. Proper Motion of the Leo II Dwarf Galaxy Based On Hubble Space Telescope Imaging

    CERN Document Server

    Piatek, Slawomir; Olszewski, Edward W

    2016-01-01

    This article reports a measurement of the proper motion of Leo II, a dwarf galaxy that is a likely satellite of the Milky Way, based on imaging with the Hubble Space Telescope and Wide Field Camera 3. The measurement uses compact background galaxies as standards of rest in both channels of the camera for two distinct pointings of the telescope and a QSO in one channel for each pointing, resulting in the weighted average of six measurements. The measured proper motion in the the equatorial coordinate system is (mu_alpha, mu_delta) = (-6.9 +- 3.7, -8.7 +- 3.9) mas/century and in the Galactic coordinate system is (mu_l, mu_b) = (6.2 +- 3.9, -9.2 +- 3.7) mas/century. The implied space velocity with respect to the Galactic center is (Pi, Theta, Z) = (-37 +- 38, 117 +- 43, 40 +- 16) km/s or, expressed in Galactocentric radial and tangential components, (V_r, V_tan) = (21.9 +- 1.5, 127 +- 42) km/s. The space velocity implies that the instantaneous orbital inclination is 68 degrees, with a 95% confidence interval of ...

  11. CHARIS Science: Performance Simulations for the Subaru Telescope's Third-Generation of Exoplanet Imaging Instrumentation

    CERN Document Server

    Brandt, Timothy D; Janson, Markus; Knapp, Gillian R; Mede, Kyle; Limbach, Mary Anne; Groff, Tyler; Burrows, Adam; Gunn, James E; Guyon, Olivier; Hashimoto, Jun; Hayashi, Masahiko; Jovanovic, Nemanja; Kasdin, N Jeremy; Kuzuhara, Masayuki; Lupton, Robert H; Martinache, Frantz; Sorahana, Satoko; Spiegel, David S; Takato, Naruhisa; Tamura, Motohide; Turner, Edwin L; Vanderbei, Robert; Wisniewski, John

    2014-01-01

    We describe the expected scientific capabilities of CHARIS, a high-contrast integral-field spectrograph (IFS) currently under construction for the Subaru telescope. CHARIS is part of a new generation of instruments, enabled by extreme adaptive optics (AO) systems (including SCExAO at Subaru), that promise greatly improved contrasts at small angular separation thanks to their ability to use spectral information to distinguish planets from quasistatic speckles in the stellar point-spread function (PSF). CHARIS is similar in concept to GPI and SPHERE, on Gemini South and the Very Large Telescope, respectively, but will be unique in its ability to simultaneously cover the entire near-infrared $J$, $H$, and $K$ bands with a low-resolution mode. This extraordinarily broad wavelength coverage will enable spectral differential imaging down to angular separations of a few $\\lambda/D$, corresponding to $\\sim$$0.\\!\\!''1$. SCExAO will also offer contrast approaching $10^{-5}$ at similar separations, $\\sim$$0.\\!\\!''1$--$0...

  12. New Frontiers for Massive Star Winds: Imaging and Spectroscopy with the James Webb Space Telescope

    Science.gov (United States)

    Sonneborn, George

    2007-01-01

    The James Webb Space Telescope (JWST) is a large, infrared-optimized space telescope scheduled for launch in 2013. JWST will find the first stars and galaxies that formed in the early universe, connecting the Big Bang to our own Milky Way galaxy. JWST will peer through dusty clouds to see stars forming planetary systems, connecting the Milky Way to our own Solar System. JWST's instruments are designed to work primarily in the infrared range of 1 - 28 microns, with some capability in the visible range. JWST will have a large mirror, 6.5 meters in diameter, and will be diffraction-limited at 2 microns (0.1 arcsec resolution). JWST will be placed in an L2 orbit about 1.5 million km from the Earth. The instruments will provide imaging, coronography, and multi-object and integral-field spectroscopy across the full 1 - 28 micron wavelength range. The breakthrough capabilities of JWST will enable new studies of massive star winds from the Milky Way to the early universe.

  13. GAW - An Imaging Atmospheric Cherenkov Telescope with Large Field of View

    CERN Document Server

    Cusumano, G; Alberdi, A; Alvarez, M; Assis, P; Biondo, B; Bocchino, F; Brogueira, P; Caballero, J A; Carvajal, M; Castro-Tirado, A J; Catalano, O; Celi, F; Delgado, C; Di Cocco, G; Dominguez, A; Navas, J M Espino; Santo, M C Espirito; Gallardo, M I; García, J E; Giarrusso, S; Gómez, M; Gómez, J L; Gonçalves, P; Guerriero, M; La Barbera, A; La Rosa, G; Lozano, M; Maccarone, M C; Mangano, A; Martel, I; Massaro, E; Mineo, T; Moles, M; Pérez-Bernal, F; Peres-Torres, M A; Pimenta, M; Pina, A; Prada, F; Quesada, J M; Quintana, J M; Quintero, J R; Rodríguez, J; Russo, F; Sacco, B; Sanchez-Conde, M A; Segreto, A; Tome', B; Postigo, A de Ugarte; Vallania, P

    2007-01-01

    GAW, acronym for Gamma Air Watch, is a Research and Development experiment in the TeV range, whose main goal is to explore the feasibility of large field of view Imaging Atmospheric Cherenkov Telescopes. GAW is an array of three relatively small telescopes (2.13 m diameter) which differs from the existing and presently planned projects in two main features: the adoption of a refractive optics system as light collector and the use of single photoelectron counting as detector working mode. The optics system allows to achieve a large field of view (24x24 squared degrees) suitable for surveys of large sky regions. The single photoelectron counting mode in comparison with the charge integration mode improves the sensitivity by permitting also the reconstruction of events with a small number of collected Cherenkov photons. GAW, which is a collaboration effort of Research Institutes in Italy, Portugal and Spain, will be erected in the Calar Alto Observatory (Sierra de Los Filabres - Andalucia, Spain), at 2150 m a.s....

  14. Discovery and imaging of a Galactic cirrus cloud with the far ultraviolet space telescope

    Science.gov (United States)

    Haikala, Lauri K.; Mattila, Kalevi; Bowyer, Stuart; Sasseen, Timothy P.; Lampton, Michael; Knude, Jens

    1995-01-01

    We present new far-ultraviolet (1400-1800 A) data concerning a Galactic cirrus cloud G251.2+73.3 near the north Galactic pole obtained with the space-borne imaging telescope FAUST (Far Ultraviolet Space Telescope). We obtain a good correlation between the far-ultraviolet (FUV) and IRAS 100 micrometers surface brightnesses, their relation being I(sub FUV) = (128 +/- 3) I(sub 100 micrometers) - (264 +/- 9), where the I(sub FUV) flux is given in units of photon/s/sq cm/A/sr and I(sub 100 micrometers) in MJy/sr. Using uvbyH-beta photometry, we get a distance of 120 pc and a visual extinction in the center of the cloud of 0.39 mag corresponding to an extinction of 1.0 mag at 1565 A. We have performed a multiple scattering calculation for the scattered light using the Monte Carlo method. These calculations provide restrictions on the FUV scattering properties of the interstellar dust.

  15. Front-end electronics and data acquisition system for imaging atmospheric Cherenkov telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Y.T., E-mail: chenytao@ynu.edu.cn [Institut de Physique Nucléaire, IN2P3-CNRS, Université Paris-Sud, 91406 Orsay Cedex (France); Yunnan University, 650091 Kunming (China); La Taille, C. de [OMEGA (UMS 3605) - IN2P3/CNRS, Ecole Polytechnique, 91128 Palaiseau Cedex (France); Suomijärvi, T. [Institut de Physique Nucléaire, IN2P3-CNRS, Université Paris-Sud, 91406 Orsay Cedex (France); Cao, Z. [Institute of High Energy Physics, 100049 Beijing (China); Deligny, O. [Institut de Physique Nucléaire, IN2P3-CNRS, Université Paris-Sud, 91406 Orsay Cedex (France); Dulucq, F. [OMEGA (UMS 3605) - IN2P3/CNRS, Ecole Polytechnique, 91128 Palaiseau Cedex (France); Ge, M.M. [Yunnan University, 650091 Kunming (China); Lhenry-Yvon, I. [Institut de Physique Nucléaire, IN2P3-CNRS, Université Paris-Sud, 91406 Orsay Cedex (France); Martin-Chassard, G. [OMEGA (UMS 3605) - IN2P3/CNRS, Ecole Polytechnique, 91128 Palaiseau Cedex (France); Nguyen Trung, T.; Wanlin, E. [Institut de Physique Nucléaire, IN2P3-CNRS, Université Paris-Sud, 91406 Orsay Cedex (France); Xiao, G.; Yin, L.Q. [Institute of High Energy Physics, 100049 Beijing (China); Yun Ky, B. [Institut de Physique Nucléaire, IN2P3-CNRS, Université Paris-Sud, 91406 Orsay Cedex (France); Zhang, L. [Yunnan University, 650091 Kunming (China); Zhang, H.Y. [Tsinghua University, 100084 Beijing (China); Zhang, S.S.; Zhu, Z. [Institute of High Energy Physics, 100049 Beijing (China)

    2015-09-21

    In this paper, a front-end electronics based on an application-specific integrated circuit (ASIC) is presented for the future imaging atmospheric Cherenkov telescopes (IACTs). To achieve this purpose, a 16-channel ASIC chip, PARISROC 2 (Photomultiplier ARray Integrated in SiGe ReadOut Chip) is used in the analog signal processing and digitization. The digitized results are sent to the server by a user-defined User Datagram Protocol/Internet Protocol (UDP/IP) hardcore engine through Ethernet that is managed by a FPGA. A prototype electronics fulfilling the requirements of the Wide Field of View Cherenkov Telescope Array (WFCTA) of the Large High Altitude Air Shower Observatory (LHAASO) project has been designed, fabricated and tested to prove the concept of the design. A detailed description of the development with the results of the test measurements are presented. By using a new input structure and a new configuration of the ASIC, the dynamic range of the circuit is extended. A highly precise-time calibrating algorithm is also proposed, verified and optimized for the mass production. The test results suggest that the proposed electronics design fulfills the general specification of the future IACTs.

  16. The structure of an Imaging Atmospheric Cherenkov Telescope with novel photon detectors for ground-based gamma-ray astronomy

    Energy Technology Data Exchange (ETDEWEB)

    Koehne, Jan-Hendrik [TU, Dortmund (Germany); Collaboration: FACT-Collaboration

    2011-07-01

    Very high energy gamma-ray astronomy is a rapidly expanding field of research. Observations are nearly all carried out with so-called Imaging Atmospheric Cherenkov Telescopes all using Photomultipliers as light sensors up to now. A test telescope using Geiger-mode avalanche photodiodes (G-APD) for the first time is under construction. The former HEGRA CT3 telescope mount on the Canary island La Palma is being refurbished for the First G-APD Cherenkov Telescope (FACT). Here, we describe the mirror system, its detailed construction, focal length distribution, spectral reflectivity and point spread function for all hexagonal aluminum facets. In October 2010, the mirrors were pre-aligned on site using a laser alignment setup, and first tracking tests of the new drive system were conducted.

  17. A Monte Carlo template-based analysis for very high definition imaging atmospheric Cherenkov telescopes as applied to the VERITAS telescope array

    CERN Document Server

    ,

    2015-01-01

    We present a sophisticated likelihood reconstruction algorithm for shower-image analysis of imaging Cherenkov telescopes. The reconstruction algorithm is based on the comparison of the camera pixel amplitudes with the predictions from a Monte Carlo based model. Shower parameters are determined by a maximisation of a likelihood function. Maximisation of the likelihood as a function of shower fit parameters is performed using a numerical non-linear optimisation technique. A related reconstruction technique has already been developed by the CAT and the H.E.S.S. experiments, and provides a more precise direction and energy reconstruction of the photon induced shower compared to the second moment of the camera image analysis. Examples are shown of the performance of the analysis on simulated gamma-ray data from the VERITAS array.

  18. Young Planetary Nebulae: Hubble Space Telescope Imaging and a New Morphological Classification System

    CERN Document Server

    Sahai, Raghvendra; Villar, Gregory G

    2011-01-01

    Using Hubble Space Telescope images of 119 young planetary nebulae, most of which have not previously been published, we have devised a comprehensive morphological classification system for these objects. This system generalizes a recently devised system for pre-planetary nebulae, which are the immediate progenitors of planetary nebulae (PNs). Unlike previous classification studies, we have focussed primarily on young PNs rather than all PNs, because the former best show the influences or symmetries imposed on them by the dominant physical processes operating at the first and primary stage of the shaping process. Older PNs develop instabilities, interact with the ambient interstellar medium, and are subject to the passage of photoionization fronts, all of which obscure the underlying symmetries and geometries imposed early on. Our classification system is designed to suffer minimal prejudice regarding the underlying physical causes of the different shapes and structures seen in our PN sample, however, in many...

  19. AOLI-- Adaptive Optics Lucky Imager: Diffraction Limited Imaging in the Visible on Large Ground-Based Telescopes

    CERN Document Server

    Mackay, Craig; Castellá, Bruno Femenia; Crass, Jonathan; King, David L; Labadie, Lucas; Aisher, Peter; Garrido, Antonio Pérez; Balcells, Marc; Díaz-Sánchez, Anastasio; Fuensalida, Jesús Jimenez; Lopez, Roberto L; Oscoz, Alejandro; Prieto, Jorge A Pérez; Rodríguez-Ramos, Luis F; Villó, Isidro

    2012-01-01

    The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow dramatically fainter reference stars to be used, allowing virtually full sky coverage with a natural guide star. This paper also describes a significant improvements in the efficiency of Lucky Imaging, important advances in wavefront reconstruction with curvature sensors and the results of simulations and sensitivity limits. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is likely to be the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been p...

  20. GRMHD simulations of visibility amplitude variability for Event Horizon Telescope images of Sgr A*

    CERN Document Server

    Medeiros, Lia; Ozel, Feryal; Psaltis, Dimitrios; Kim, Junhan; Marrone, Daniel P; Sadowski, Aleksander

    2016-01-01

    Synthesis imaging of the black hole in the center of the Milky Way, Sgr A*, with the Event Horizon Telescope (EHT) rests on the assumption of a stationary image. We explore the limitations of this assumption using high-cadence GRMHD simulations of Sgr A*. We employ analytic models that capture the basic characteristics of the images to understand the origin of the variability in the simulated visibility amplitudes. We find that, in all simulations, the visibility amplitudes for baselines oriented perpendicular to the spin axis of the black hole typically decrease smoothly over baseline lengths that are comparable to those of the EHT. On the other hand, the visibility amplitudes for baselines oriented parallel to the spin axis show significant structure with one or more minima. This suggests that fitting EHT observations with geometric models will lead to reasonably accurate determination of the orientation of the black-hole on the plane of the sky. However, in the disk-dominated models, the locations and dept...

  1. Reaching the Diffraction Limit - Differential Speckle and Wide-Field Imaging for the Gemini-N Telescope

    Science.gov (United States)

    Scott, Nic J.; Howell, Steve; Horch, Elliott

    2016-01-01

    Speckle imaging allows telescopes to achieve di raction limited imaging performance. The technique requires cameras capable of reading out frames at a very fast rate, e ectively `freezing out' atmospheric seeing. The resulting speckles can be correlated and images reconstructed that are at the di raction limit of the telescope. These new instruments are based on the successful performance and design of the Di erential Speckle Survey Instrument (DSSI) [2, 1]. The instruments are being built for the Gemini-N and WIYN telescopes and will be made available to the community via the peer review proposal process. We envision their primary use to be validation and characterization of exoplanet targets from the NASA K2 and TESS missions and RV discovered exoplanets. Such targets will provide excellent follow-up candidates for both the WIYN and Gemini telescopes [3]. Examples of DSSI data are shown in the gures below. We expect similar data quality in speckle imaging mode with the new instruments. Additionally, both cameras will have a wide- eld mode and standard SDSS lters. They will be highly versatile instruments and it is that likely many other science programs will request time on the cameras. The limiting magnitude for speckle observations, will remain around 13-14th at WIYN and 16-17th at Gemini, while wide- eld, normal CCD imaging operation should be able to go to much fainter, providing usual CCD imaging and photometric capabilities. The instruments will also have high utility as scoring cameras for telescope engineering purposes, or other applications where high time resolution is needed. Instrument support will be provided, including a software pipeline that takes raw speckle data to fully reconstructed images.

  2. Tri-material multilayer coatings with high reflectivity and wide bandwidth for 25 to 50 nm extreme ultraviolet light

    Energy Technology Data Exchange (ETDEWEB)

    Aquila, Andrew; Salmassi, Farhad; Liu, Yanwei; Gullikson, Eric M.

    2009-09-09

    Magnesium/silicon carbide (Mg/SiC) multilayers have been fabricated with normal incidence reflectivity in the vicinity of 40% to 50% for wavelengths in the 25 to 50 nm wavelength range. However many applications, for example solar telescopes and ultrafast studies using high harmonic generation sources, desire larger bandwidths than provided by high reflectivity Mg/SiC multilayers. We investigate introducing a third material, Scandium, to create a tri-material Mg/Sc/SiC multilayer allowing an increase the bandwidth while maintaining high reflectivity.

  3. High-contrast imager for Complex Aperture Telescopes (HiCAT): 2. Design overview and first light results

    CERN Document Server

    N'Diaye, Mamadou; Egron, Sylvain; Pueyo, Laurent; Leboulleux, Lucie; Levecq, Olivier; Perrin, Marshall D; Elliot, Erin; Wallace, J Kent; Hugot, Emmanuel; Marcos, Michel; Ferrari, Marc; Long, Chris A; Anderson, Rachel; DiFelice, Audrey; Soummer, Rémi

    2014-01-01

    We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spread function make high-contrast imaging more challenging. In particular the testbed will be compatible with both AFTA-like and ATLAST-like aperture shapes, respectively on-axis monolithic, and on-axis segmented telescopes. The testbed optical design was developed using a novel approach to define the layout and surface error requirements to minimize amplitude-induced errors at the target contrast level performance. In this communication we compare the as-built surface errors for each optic to their specifications based on end-to-end Fresnel modeling of the testbed. We also report on the testbed optical and optomechani...

  4. Relationship between sensitizer concentration and resist performance of chemically amplified extreme ultraviolet resists in sub-10 nm half-pitch resolution region

    Science.gov (United States)

    Kozawa, Takahiro; Santillan, Julius Joseph; Itani, Toshiro

    2017-01-01

    The development of lithography processes with sub-10 nm resolution is challenging. Stochastic phenomena such as line width roughness (LWR) are significant problems. In this study, the feasibility of sub-10 nm fabrication using chemically amplified extreme ultraviolet resists with photodecomposable quenchers was investigated from the viewpoint of the suppression of LWR. The relationship between sensitizer concentration (the sum of acid generator and photodecomposable quencher concentrations) and resist performance was clarified, using the simulation based on the sensitization and reaction mechanisms of chemically amplified resists. For the total sensitizer concentration of 0.5 nm-3 and the effective reaction radius for the deprotection of 0.1 nm, the reachable half-pitch while maintaining 10% critical dimension (CD) LWR was 11 nm. The reachable half-pitch was 7 nm for 20% CD LWR. The increase in the effective reaction radius is required to realize the sub-10 nm fabrication with 10% CD LWR.

  5. Elongation of extreme ultraviolet (at 13.5 nm) emission with time-of-flight controlled discharges and lateral fuel injection

    Science.gov (United States)

    Hosokai, Tomonao; Yokoyama, Takuma; Zhidkov, Alexei; Sato, Hiroto; Hotta, Eiki; Horioka, Kazuhiko

    2008-09-01

    A way toward a quasicontinuous extreme ultraviolet (EUV) radiation source is proposed and explored. Tin and lithium vapor discharges with the lateral laser-ablation injection are experimentally studied as possible efficient sources of quasicontinuous emission of EUV radiation at a wavelength of 13.5 nm. It is shown that the time-of-flight control of optimal plasma parameters by means of varying ablating laser pulse parameters provides a considerable elongation of maximal-power EUV emission with an overall efficiency of 0.1% and with an energy output exceeding 1% of the energy deposited in the discharge plasma. Along with a high average power and a stable position, such an emitter may have its size small enough to be used in the projection lithography.

  6. Harmonium: A pulse preserving source of monochromatic extreme ultraviolet (30–110 eV radiation for ultrafast photoelectron spectroscopy of liquids

    Directory of Open Access Journals (Sweden)

    J. Ojeda

    2016-03-01

    Full Text Available A tuneable repetition rate extreme ultraviolet source (Harmonium for time resolved photoelectron spectroscopy of liquids is presented. High harmonic generation produces 30–110 eV photons, with fluxes ranging from ∼2 × 1011 photons/s at 36 eV to ∼2 × 108 photons/s at 100 eV. Four different gratings in a time-preserving grating monochromator provide either high energy resolution (0.2 eV or high temporal resolution (40 fs between 30 and 110 eV. Laser assisted photoemission was used to measure the temporal response of the system. Vibrational progressions in gas phase water were measured demonstrating the ∼0.2 eV energy resolution.

  7. First observation of natural circular dichroism spectra in the extreme ultraviolet region using a polarizing undulator-based optical system and its polarization characteristics.

    Science.gov (United States)

    Tanaka, Masahito; Yagi-Watanabe, Kazutoshi; Kaneko, Fusae; Nakagawa, Kazumichi

    2009-07-01

    Natural circular dichroism (CD) spectra in the extreme ultraviolet (EUV) region down to a wavelength of 80 nm have been observed for the first time, using an alanine thin film deposited on sodium salicylate coated glass as a sample. Calibrated EUV-CD spectra of L-alanine exhibited a large negative peak at around 120 nm and a positive CD signal below 90 nm, which were roughly predicted by theoretical calculations. A CD measurement system with an Onuki-type polarizing undulator was used to obtain the EUV-CD spectra. This CD system, the development of which took five years, can be used to observe even weak natural CD spectra. The polarization characteristics of this system were also evaluated in order to calibrate the recorded CD spectra.

  8. Far-infrared-light shadowgraphy for high extraction efficiency of extreme ultraviolet light from a CO2-laser-generated tin plasma

    Science.gov (United States)

    Matsukuma, Hiraku; Hosoda, Tatsuya; Suzuki, Yosuke; Yogo, Akifumi; Yanagida, Tatsuya; Kodama, Takeshi; Nishimura, Hiroaki

    2016-08-01

    The two-color, double-pulse method is an efficient scheme to generate extreme ultraviolet light for fabricating the next generation semiconductor microchips. In this method, a Nd:YAG laser pulse is used to expand a several-tens-of-micrometers-scale tin droplet, and a CO2 laser pulse is subsequently directed at the expanded tin vapor after an appropriate delay time. We propose the use of shadowgraphy with a CO2 laser probe-pulse scheme to optimize the CO2 main-drive laser. The distribution of absorption coefficients is derived from the experiment, and the results are converted to a practical absorption rate for the CO2 main-drive laser.

  9. The Black Hole Mass-Bulge Luminosity Relationship for Active Galactic Nuclei From Reverberation Mapping and Hubble Space Telescope Imaging

    DEFF Research Database (Denmark)

    Bentz, Misty C.; Peterson, Bradley M.; Pogge, Richard W.

    2009-01-01

    We investigate the relationship between black hole mass and bulge luminosity for active galactic nuclei (AGNs) with reverberation-based black hole mass measurements and bulge luminosities from two-dimensional decompositions of Hubble Space Telescope host galaxy images. We find that the slope...

  10. The MUSCLES Treasury Survey. II. Intrinsic LYα and Extreme Ultraviolet Spectra of K and M Dwarfs with Exoplanets*

    Science.gov (United States)

    Youngblood, Allison; France, Kevin; Parke Loyd, R. O.; Linsky, Jeffrey L.; Redfield, Seth; Schneider, P. Christian; Wood, Brian E.; Brown, Alexander; Froning, Cynthia; Miguel, Yamila; Rugheimer, Sarah; Walkowicz, Lucianne

    2016-06-01

    The ultraviolet (UV) spectral energy distributions (SEDs) of low-mass (K- and M-type) stars play a critical role in the heating and chemistry of exoplanet atmospheres, but are not observationally well-constrained. Direct observations of the intrinsic flux of the Lyα line (the dominant source of UV photons from low-mass stars) are challenging, as interstellar H i absorbs the entire line core for even the closest stars. To address the existing gap in empirical constraints on the UV flux of K and M dwarfs, the MUSCLES Hubble Space Telescope Treasury Survey has obtained UV observations of 11 nearby M and K dwarfs hosting exoplanets. This paper presents the Lyα and extreme-UV spectral reconstructions for the MUSCLES targets. Most targets are optically inactive, but all exhibit significant UV activity. We use a Markov Chain Monte Carlo technique to correct the observed Lyα profiles for interstellar absorption, and we employ empirical relations to compute the extreme-UV SED from the intrinsic Lyα flux in ˜100 Å bins from 100-1170 Å. The reconstructed Lyα profiles have 300 km s-1 broad cores, while >1% of the total intrinsic Lyα flux is measured in extended wings between 300 and 1200 km s-1. The Lyα surface flux positively correlates with the Mg ii surface flux and negatively correlates with the stellar rotation period. Stars with larger Lyα surface flux also tend to have larger surface flux in ions formed at higher temperatures, but these correlations remain statistically insignificant in our sample of 11 stars. We also present H i column density measurements for 10 new sightlines through the local interstellar medium. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the data archive at the Space Telescope Science Institute. STScI is operated by the Association of Universities for Research in Astronomy, Inc. under NASA contract NAS 5-26555.

  11. A New Method for Wide-field Near-IR Imaging with the Hubble Space Telescope

    Science.gov (United States)

    Momcheva, Ivelina G.; van Dokkum, Pieter G.; van der Wel, Arjen; Brammer, Gabriel B.; MacKenty, John; Nelson, Erica J.; Leja, Joel; Muzzin, Adam; Franx, Marijn

    2017-01-01

    We present a new technique for wide and shallow observations using the near-infrared channel of Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST). Wide-field near-IR surveys with HST are generally inefficient, as guide star acquisitions make it impractical to observe more than one pointing per orbit. This limitation can be circumvented by guiding with gyros alone, which is possible as long as the telescope has three functional gyros. The method presented here allows us to observe mosaics of eight independent WFC3-IR pointings in a single orbit by utilizing the fact that HST drifts by only a very small amount in the 25 s between non-destructive reads of unguided exposures. By shifting the reads and treating them as independent exposures the full resolution of WFC3 can be restored. We use this “drift and shift” (DASH) method in the Cycle 23 COSMOS-DASH program, which will obtain 456 WFC3 H 160 pointings in 57 orbits, covering an area of 0.6 degree in the COSMOS field down to H 160 = 25. When completed, the program will more than triple the area of extra-galactic survey fields covered by near-IR imaging at HST resolution. We demonstrate the viability of the method with the first four orbits (32 pointings) of this program. We show that the resolution of the WFC3 camera is preserved, and that structural parameters of galaxies are consistent with those measured in guided observations.

  12. High Contrast Imaging in the Visible: First Experimental Results at the Large Binocular Telescope

    CERN Document Server

    Pedichini, F; Ambrosino, A; Puglisi, A; Pinna, E; Bailey, V; Carbonaro, L; Centrone, M; Christou, J; Esposito, S; Farinato, J; Fiore, F; Giallongo, E; Hill, J M; Hinz, P M; Sabatini, L

    2016-01-01

    In February 2014, the SHARK-VIS (System for High contrast And coronography from R to K at VISual bands) Forerunner, a high contrast experimental imager operating at visible wavelengths, was installed at LBT (Large Binocular Telescope). Here we report on the first results obtained by recent on-sky tests. These results show the extremely good performance of the LBT ExAO (Extreme Adaptive Optics) system at visible wavelengths, both in terms of spatial resolution and contrast achieved. Similarly to what was done by (Amara et al. 2012), we used the SHARK-VIS Forerunner data to quantitatively assess the contrast enhancement. This is done by injecting several different synthetic faint objects in the acquired data and applying the ADI (angular differential imaging) technique. A contrast of the order of $5 \\times 10^{-5}$ is obtained at 630 nm for angular separations from the star larger than 100 mas. These results are discussed in light of the future development of SHARK-VIS and compared to those obtained by other hi...

  13. Hubble Space Telescope Imaging of the Expanding Nebular Remnant of the Recurrent Nova RS Ophiuchi (2006)

    CERN Document Server

    Bode, M F; O'Brien, T J; Bond, H E; Starrfield, S; Darnley, M J; Evans, A; Eyres, S P S

    2007-01-01

    We report Hubble Space Telescope imaging obtained 155 days after the 2006 outburst of RS Ophiuchi. We detect extended emission in both [O III] and [Ne V] lines. In both lines, the remnant has a double ring structure. The E-W orientation and total extent of these structures (580+-50 AU at d=1.6kpc) is consistent with that expected due to expansion of emitting regions imaged earlier in the outburst at radio wavelengths. Expansion at high velocity appears to have been roughly constant in the E-W direction (v_{exp} = 3200+-300 km/s in the plane of the sky), with tentative evidence of deceleration N-S. We present a bipolar model of the remnant whose inclination is consistent with that of the central binary. The true expansion velocities of the polar components are then v = 5600+-1100 km/s. We suggest that the bipolar morphology of the remnant results from interaction of the outburst ejecta with a circumstellar medium that is significantly denser in the equatorial regions of the binary than at the poles. This is al...

  14. Dynamics in Sunspot Umbra as Seen in New Solar Telescope and Interface Region Imaging Spectrograph Data

    CERN Document Server

    Yurchyshyn, Vasyl; Kilcik, Ali

    2014-01-01

    We analyse sunspot oscillations using Interface Region Imaging Spectrograph (IRIS) slit-jaw and spectral data and narrow-band chromospheric images from the New Solar Telescope (NST) for the main sunspot in NOAA AR 11836. We report that the difference between the shock arrival times as measured the Mg II k 2796.35\\AA\\ and Si IV 1393.76\\AA\\ line formation levels changes during the observed period and peak-to-peak delays may range from 40~s to zero. The intensity of chromospheric shocks also displays a long term (about 20~min) variations. NST's high spatial resolution \\ha\\ data allowed us to conclude that in this sunspot umbral flashes (UFs) appeared in the form of narrow bright lanes stretched along the light bridges and around clusters of umbral bright points. Time series also suggested that UFs preferred to appear on the sunspot-center side of light bridges, which may indicate the existence of a compact sub-photospheric driver of sunspot oscillations. The sunspot's umbra as seen in the IRIS chromospheric and ...

  15. Hubble Space Telescope Imaging of Lyman Alpha Emission at z=4.4

    CERN Document Server

    Finkelstein, Steven L; Windhorst, Rogier A; Ryan, Russell E; Hathi, Nimish P; Finkelstein, Keely D; Anderson, Jay; Grogin, Norman A; Koekemoer, Anton M; Malhotra, Sangeeta; Mutchler, Max; Rhoads, James E; McCarthy, Patrick J; O'Connell, Robert W; Balick, Bruce; Bond, Howard E; Calzetti, Daniela; Disney, Michael J; Dopita, Michael A; Frogel, Jay A; Hall, Donald N B; Holtzman, Jon A; Kimble, Randy A; Luppino, Gerard; Paresce, Francesco; Saha, Abhijit; Silk, Joseph I; Trauger, John T; Walker, Alistair R; Whitmore, Bradley C; Young, Erick T

    2010-01-01

    We present the highest redshift detections of resolved Lyman alpha emission, using Hubble Space Telescope/ACS F658N narrowband-imaging data taken in parallel with the Wide Field Camera 3 Early Release Science program in the GOODS CDF-S. We detect Lyman alpha emission from three spectroscopically confirmed z = 4.4 Lyman alpha emitting galaxies (LAEs), more than doubling the sample of LAEs with resolved Lyman alpha emission. Comparing the light distribution between the rest-frame ultraviolet continuum and narrowband images, we investigate the escape of Lyman alpha photons at high redshift. While our data do not support a positional offset between the Lyman alpha and rest-frame ultraviolet (UV) continuum emission, the half-light radii in two out of the three galaxies are significantly larger in Lyman alpha than in the rest-frame UV continuum. This result is confirmed when comparing object sizes in a stack of all objects in both bands. Additionally, the narrowband flux detected with HST is significantly less than...

  16. Confirmation of Hostless Type Ia Supernovae Using Hubble Space Telescope Imaging

    CERN Document Server

    Graham, Melissa L; Zaritsky, Dennis; Pritchet, Chris J

    2015-01-01

    We present deep Hubble Space Telescope imaging at the locations of four, potentially hostless, long-faded Type Ia supernovae (SNe Ia) in low-redshift, rich galaxy clusters that were identified in the Multi-Epoch Nearby Cluster Survey. Assuming a steep faint-end slope for the galaxy cluster luminosity function ($\\alpha_d=-1.5$), our data includes all but $\\lesssim0.2\\%$ percent of the stellar mass in cluster galaxies ($\\lesssim0.005\\%$ with $\\alpha_d=-1.0$), a factor of 10 better than our ground-based imaging. Two of the four SNe Ia still have no possible host galaxy associated with them ($M_R>-9.2$), confirming that their progenitors belong to the intracluster stellar population. The third SNe Ia appears near a faint disk galaxy ($M_V=-12.2$) which has a relatively high probability of being a chance alignment. A faint, red, point source coincident with the fourth SN Ia's explosion position ($M_V=-8.4$) may be either a globular cluster (GC) or faint dwarf galaxy. We estimate the local surface densities of GCs ...

  17. Hubble space telescope high-resolution imaging of Kepler small and cool exoplanet host stars

    Energy Technology Data Exchange (ETDEWEB)

    Gilliland, Ronald L.; Cartier, Kimberly M. S.; Wright, Jason T. [Department of Astronomy and Astrophysics, and Center for Exoplanets and Habitable Worlds, The Pennsylvania State University, 525 Davey Lab, University Park, PA 16802 (United States); Adams, Elisabeth R. [Planetary Science Institute, 1700 East Fort Lowell, Suite 106, Tucson, AZ 85719 (United States); Ciardi, David R. [NASA Exoplanet Science Institute/Caltech, Pasadena, CA 91125 (United States); Kalas, Paul, E-mail: gillil@stsci.edu [Astronomy Department, University of California, Berkeley, CA 94720 (United States)

    2015-01-01

    High-resolution imaging is an important tool for follow-up study of exoplanet candidates found via transit detection with the Kepler mission. We discuss here Hubble Space Telescope imaging with the WFC3 of 23 stars that host particularly interesting Kepler planet candidates based on their small size and cool equilibrium temperature estimates. Results include detections, exclusion of background stars that could be a source of false positives for the transits, and detection of physically associated companions in a number of cases providing dilution measures necessary for planet parameter refinement. For six Kepler objects of interest, we find that there is ambiguity regarding which star hosts the transiting planet(s), with potentially strong implications for planetary characteristics. Our sample is evenly distributed in G, K, and M spectral types. Albeit with a small sample size, we find that physically associated binaries are more common than expected at each spectral type, reaching a factor of 10 frequency excess in M. We document the program detection sensitivities, detections, and deliverables to the Kepler follow-up program archive.

  18. Fresnel zone plate telescope for condenser alignment in water-window microscope

    Science.gov (United States)

    Wachulak, Przemyslaw W.; Torrisi, Alfio; Bartnik, Andrzej; Węgrzyński, Łukasz; Fok, Tomasz; Jarocki, Roman; Kostecki, Jerzy; Szczurek, Miroslaw; Fiedorowicz, Henryk

    2015-05-01

    Microscopes operating at short wavelengths, in the extreme ultraviolet and soft x-ray spectral region, require careful condenser positioning to avoid possible artifacts related to enhancing or diminishing certain spatial frequencies in the image plane. Various methods are often used to visualize the condenser illumination pattern, including direct visualization on a CCD camera; however, these are not always straightforward to use. We present and discuss a novel and convenient method to image a condenser illumination pattern upstream the sample plane, using two zone plates with matched numerical apertures. This imaging system, operating herein in the water-window spectral range in telescope configuration, allows us to change the distance between the conjugated planes, thus overcoming limitations related to the geometry of the vacuum system. This geometry, which is optimized for the highest possible spatial resolution allowed by the zone-plate objective, is not necessarily particularly good for visualization of the condenser illumination pattern. The presented method was demonstrated with a compact, gas puff target source based soft x-ray microscope, which is capable of resolving 60 nm features (half-pitch resolution), requires a few seconds exposure time, and is debris-free due to the gaseous nature of the target for soft x-ray generation. The method, presented herein, may solve mentioned vacuum system geometry limitations. Also, it can easily be extended to other systems and other wavelengths, provided a proper optic is used. Modes of operation and the results are presented and discussed.

  19. Deployable Integral Field Units, Multislits, and Image Slicer for the Goodman Imaging Spectrograph on the SOAR Telescope

    Science.gov (United States)

    Cecil, Gerald N.; Moffett, A. J.; Cui, Y.; Eckert, K. D.; McBride, J.; Kannappan, S.; Keller, K.; Barlow, B. N.; Dunlap, B.; Bland-Hawthorn, J.

    2010-01-01

    The Goodman Imager-Spectrograph on the 4.1m SOAR telescope has operated on Cerro Pachon, Chile with volume-phase holographic gratings in long-slit mode since its commissioning in 2008. Recently, UNC graduate students played key roles to implement robust upgrades for multi-object spectroscopy that will soon be available to US astronomers through the NOAO time share on SOAR: • Multislits over 3x5 arcmin, generated on PCB solder stencils with exceptional sharpness compared to conventional laser cuts, initially to survey globular clusters for pulsating hot sub-dwarfs • An image slicer to obtain 3 simultaneous parallel spectra 70-arcsec long, 1- or 2-arcsec wide, spanning 320-750 nm to map stellar and gaseous emission and mass over the 1500 galaxies in the RESOLVE survey underway on SOAR • Four integral field units, each composed of 5-arcsec diameter, fused bundles of 0.5-arcsec diameter thin-clad optical fiber, independently deployed over a 10x5 arcmin field targeted by an EMCCD also used for Lucky Imaging. Initially will study aperture effects in single fiber surveys, extragalactic globular clusters, and demonstrate technology prior to deployment on larger telescopes • New wheels supporting a large set of existing narrow-band and Sloan filters • A trombone-style atmospheric dispersion compensator that corrects the full 12-arcmin diameter science field down to 30 deg elevation. Working in UNC's Goodman Laboratory for Astronomical Instrumentation, students employed SolidWorks and ZEMAX to design parts for in-house CAM on CNC machines and a 3D printer. All motors are controlled by LabVIEW as is the SOAR TCS. The deployable IFU axes are controlled by Quicksilver Controls Inc. intelligent servos and $80 model robot (Firgelli Corp.) actuators driven by a PIC-microcontroller and a student designed custom PCB. Upgrades and students were supported by $200K from SOAR Corporation, Research Corporation, NSF, and UNC competitive funds, and NC NASA Space Grant, Sigma Xi

  20. Calibration results using highly aberrated images for aligning the JWST instruments to the telescope

    Science.gov (United States)

    Smith, Koby Z.; Acton, D. Scott; Gallagher, Ben B.; Knight, J. Scott; Dean, Bruce H.; Jurling, Alden S.; Zielinski, Thomas P.

    2016-07-01

    The James Webb Space Telescope (JWST) project is an international collaboration led by NASA's Goddard Space Flight Center (GSFC) in Greenbelt, MD. JWST is NASA's flagship observatory that will operate nearly a million miles away from Earth at the L2 Lagrange point. JWST's optical design is a three-mirror anastigmat with four main optical components; 1) the eighteen Primary Mirror Segment Assemblies (PMSA), 2) a single Secondary Mirror Assembly (SMA), 3) an Aft-Optics Subsystem (AOS) consisting of a Tertiary Mirror and Fine Steering Mirror, and 4) an Integrated Science Instrument Module consisting of the various instruments for JWST. JWST's optical system has been designed to accommodate a significant amount of alignment capability and risk with the PMSAs and SMA having rigid body motion available on-orbit just for alignment purposes. However, the Aft-Optics Subsystem (AOS) and Integrated Science Instrument Module (ISIM) are essentially fixed optical subsystems within JWST, and therefore the cryogenic alignment of the AOS to the ISIM is critical to the optical performance and mission success of JWST. In support of this cryogenic alignment of the AOS to ISIM, an array of fiber optic sources, known as the AOS Source Plate Assembly (ASPA), are placed near the intermediate image location of JWST (between the secondary and tertiary mirrors) during thermal vacuum ground-test operations. The AOS produces images of the ASPA fiber optic sources at the JWST focal surface location, where they are captured by the various science instruments. In this manner, the AOS provides an optical yardstick by which the instruments within ISIM can evaluate their relative positions to and the alignment of the AOS to ISIM can be quantified. However, since the ASPA is located at the intermediate image location of the JWST three-mirror anastigmat design, the images of these fiber optic sources produced by the AOS are highly aberrated with approximately 2-3μm RMS wavefront error consisting

  1. Limitations Placed on the Time Coverage, Isoplanatic Patch Size and Exposure Time for Solar Observations Using Image Selection Procedures in the Presence of Telescope Aberrations

    Science.gov (United States)

    Beckers, J. M.; Rimmele, T. R.

    1996-12-01

    Image selection, adaptive optics and post-facto image restoration methods are all techniques being used for diffraction limited imaging with ground-based solar and stellar telescopes. Often these techniques are used in a hybrid form like e.g. the application of adaptive optics and/or post-facto image restoration in combination with already good images obtained by image selection in periods of good seeing. Fried (JOSA 56, 1372, 1966), Hecquet and Coupinot (J. Optics/Paris 16, 21, 1985) and Beckers ("Solar and Stellar Granulation", Kluwer, Rutten & Severino Eds, 55, 1988) already discussed the usefulness of image selection, or the "Lucky Observer" mode, for high resolution imaging. All assumed perfect telescope optics. In case of moderate telescope aberrations image selection can still lead to diffraction limited imaging but only when the atmospheric wavefront aberration happens to compensate that of the telescope. In this "Very Lucky Observer" mode the probability of obtaining a good image is reduced over the un-aberrated case, as are the size of the isoplanatic patch and the exposure time. We describe an analysis of these effects for varying telescope aberrations. These result in a strong case for the removal of telescope aberrations either by initial implementation or by the use of slow active optics.

  2. Rotation of Jets from Young Stars: New Clues from the Hubble Space Telescope Imaging Spectrograph

    CERN Document Server

    Coffey, D; Woitas, J; Ray, T P; Eislöffel, J; Coffey, Deirdre; Bacciotti, Francesca; Woitas, Jens; Ray, Thomas P.; Eisl\\"offel, Jochen

    2004-01-01

    We report findings from the first set of data in a current survey to establish conclusively whether jets from young stars rotate. We observed the bi-polar jets from the T Tauri stars TH28 and RW Aur, and the blue-shifted jet from T Tauri star LkH$\\alpha$321, using the Hubble Space Telescope Imaging Spectrograph (HST/STIS). Forbidden emission lines (FELs) show distinct and systematic velocity asymmetries of 10 -- 25 (+/- 5) km/s at a distance of 0".3 from the source, representing a (projected) distance of ~ 40 AU along the jet in the case of RW Aur, ~ 50 AU for TH28, and 165 AU in the case of LkH$\\alpha$321. These velocity asymmetries are interpreted as rotation in the initial portion of the jet where it is accelerated and collimated. For the bi-polar jets, both lobes appear to rotate in the same direction. Values obtained were in agreement with the predictions of MHD disk-wind models (Bacciotti et al 2002, Anderson et al 2003, Dougados et al 2003, Pesenti et al 2003). Finally, we determine, from derived toroi...

  3. The Hubble Space Telescope Survey of BL Lacertae Objects. IV. Infrared Imaging of Host Galaxies

    Science.gov (United States)

    Scarpa, Riccardo; Urry, C. Megan; Padovani, Paolo; Calzetti, Daniela; O'Dowd, Matthew

    2000-11-01

    The Hubble Space Telescope NICMOS Camera 2 was used for H-band imaging of 12 BL Lacertae objects taken from the larger sample observed with the WFPC2 in the R band by Urry and coworkers and Scarpa and coworkers. Ten of the 12 BL Lacs are clearly resolved, and the detected host galaxies are large, bright ellipticals with average absolute magnitude =-26.2+/-0.45 mag and effective radius =10+/-5 kpc. The rest-frame integrated color of the host galaxies is on average =2.3+/-0.3, consistent with the value for both radio galaxies and normal, nonactive elliptical galaxies and indicating that the dominant stellar population is old. The host galaxies tend to be bluer in their outer regions than in their cores, with average color gradient Δ(R-H)/Δlogr=-0.2 mag, again consistent with results for normal nonactive elliptical galaxies. The infrared Kormendy relation, derived for the first time for BL Lac host galaxies, is μe=3.8logre+14.8, fully in agreement with the relation for normal ellipticals. The close similarity between BL Lac host galaxies and normal ellipticals suggests that the active nucleus has surprisingly little effect on the host galaxy. This supports a picture in which all elliptical galaxies harbor black holes that can be actively accreting for some fraction of their lifetime.

  4. The Star Formation History of Leo T from Hubble Space Telescope Imaging

    CERN Document Server

    Weisz, Daniel R; Dolphin, Andrew E; Martin, Nicolas F; de Jong, Jelte T A; Holtzman, Jon A; Dalcanton, Julianne J; Gilbert, Karoline M; Williams, Benjamin F; Bell, Eric F; Belokurov, Vasily; Evans, N Wyn

    2012-01-01

    We present the star formation history (SFH) of the faintest known star-forming galaxy, Leo T, based on imaging taken with the Hubble Space Telescope (HST) Wide Field Planetary Camera 2 (WFPC2). The HST/WFPC2 color-magnitude diagram (CMD) of Leo T is exquisitely deep, extending ~ 2 magnitudes below the oldest main sequence turnoff, permitting excellent constraints on star formation at all ages. We use a maximum likelihood CMD fitting technique to measure the SFH of Leo T assuming three different sets of stellar evolution models: Padova (solar-scaled metallicity) and BaSTI (both solar-scaled and alpha-enhanced metallicities). The resulting SFHs are remarkably consistent at all ages, indicating that our derived SFH is robust to the choice of stellar evolution model. From the lifetime SFH of Leo T, we find that 50% of the total stellar mass formed prior to z ~ 1 (7.6 Gyr ago). Subsequent to this epoch, the SFH of Leo T is roughly constant until the most recent ~ 25 Myr, where the SFH shows an abrupt drop. This de...

  5. A THz Superconducting Imaging Array Developed for the DATE5 Telescope

    Science.gov (United States)

    Shi, Sheng-Cai; Zhang, Wen; Li, Jing; Miao, Wei; Lin, Zhen-Hui; Lou, Zheng; Yao, Qi-Jun

    2016-08-01

    Dome A in Antarctica, located at an altitude of 4093 m and with very low temperature in winter down to -83^{circ }C, is an exceptionally dry site. Measurements of the atmospheric transmission in the range of 0.75-15 THz by a Far-infrared/THz Fourier transform spectrometer (FTS) strongly suggest that Dome A is a unique site for ground-based THz observations, especially for the 200- and 350-micron windows. A 5-m THz telescope (DATE5) is therefore proposed for Chinese Antarctic Kunlun Observatory. We are currently developing a THz superconducting imaging array (TeSIA) for the DATE5. The TeSIA will be working at the 350-\\upmu m window, with a pixel number of 32 × 32 and a sensitivity (NEP) of ˜ 10^{-16} W/Hz^{0.5}. Ti transition-edge sensors with time-domain multiplexing and TiN microwave kinetic inductance detectors with frequency-domain multiplexing are both developed for the TeSIA. In this paper, detailed system designs and some measurement results will be presented.

  6. V838 Monocerotis: A Geometric Distance from Hubble Space Telescope Polarimetric Imaging of its Light Echo

    CERN Document Server

    Sparks, William B; Cracraft, Misty; Levay, Zolt; Crause, Lisa A; Dopita, Michael A; Henden, Arne A; Munari, Ulisse; Panagia, Nino; Starrfield, Sumner G; Sugerman, Ben E; Wagner, R Mark; White, Richard L

    2007-01-01

    Following the outburst of the unusual variable star V838 Monocerotis in 2002, a spectacular light echo appeared. A light echo provides the possibility of direct geometric distance determination, because it should contain a ring of highly linearly polarized light at a linear radius of ct, where t is the time since the outburst. We present imaging polarimetry of the V838 Mon light echo, obtained in 2002 and 2005 with the Advanced Camera for Surveys onboard the Hubble Space Telescope, which confirms the presence of the highly polarized ring. Based on detailed modeling that takes into account the outburst light curve, the paraboloidal echo geometry, and the physics of dust scattering and polarization, we find a distance of 6.1+-0.6 kpc. The error is dominated by the systematic uncertainty in the scattering angle of maximum linear polarization, taken to be theta_{max}=90^o +- 5^o. The polarimetric distance agrees remarkably well with a distance of 6.2+-1.5 kpc obtained from the entirely independent method of main-...

  7. The Lyman alpha reference sample. II. Hubble space telescope imaging results, integrated properties, and trends

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, Matthew; Östlin, Göran; Duval, Florent; Sandberg, Andreas; Guaita, Lucia; Melinder, Jens; Rivera-Thorsen, Thøger [Department of Astronomy, Oskar Klein Centre, Stockholm University, AlbaNova University Centre, SE-106 91 Stockholm (Sweden); Adamo, Angela [Max Planck Institute for Astronomy, Königstuhl 17, D-69117 Heidelberg (Germany); Schaerer, Daniel [Université de Toulouse, UPS-OMP, IRAP, F-31000 Toulouse (France); Verhamme, Anne; Orlitová, Ivana [Geneva Observatory, University of Geneva, 51 Chemin des Maillettes, CH-1290 Versoix (Switzerland); Mas-Hesse, J. Miguel; Otí-Floranes, Héctor [Centro de Astrobiología (CSIC-INTA), Departamento de Astrofísica, P.O. Box 78, E-28691 Villanueva de la Cañada (Spain); Cannon, John M.; Pardy, Stephen [Department of Physics and Astronomy, Macalester College, 1600 Grand Avenue, Saint Paul, MN 55105 (United States); Atek, Hakim [Laboratoire dAstrophysique, École Polytechnique Fédérale de Lausanne (EPFL), Observatoire, CH-1290 Sauverny (Switzerland); Kunth, Daniel [Institut d' Astrophysique de Paris, UMR 7095, CNRS and UPMC, 98 bis Bd Arago, F-75014 Paris (France); Laursen, Peter [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, Juliane Maries Vej 30, DK-2100 Copenhagen (Denmark); Herenz, E. Christian, E-mail: matthew@astro.su.se [Leibniz-Institut für Astrophysik (AIP), An der Sternwarte 16, D-14482 Potsdam (Germany)

    2014-02-10

    We report new results regarding the Lyα output of galaxies, derived from the Lyman Alpha Reference Sample, and focused on Hubble Space Telescope imaging. For 14 galaxies we present intensity images in Lyα, Hα, and UV, and maps of Hα/Hβ, Lyα equivalent width (EW), and Lyα/Hα. We present Lyα and UV radial light profiles and show they are well-fitted by Sérsic profiles, but Lyα profiles show indices systematically lower than those of the UV (n ≈ 1-2 instead of ≳ 4). This reveals a general lack of the central concentration in Lyα that is ubiquitous in the UV. Photometric growth curves increase more slowly for Lyα than the far ultraviolet, showing that small apertures may underestimate the EW. For most galaxies, however, flux and EW curves flatten by radii ≈10 kpc, suggesting that if placed at high-z only a few of our galaxies would suffer from large flux losses. We compute global properties of the sample in large apertures, and show total Lyα luminosities to be independent of all other quantities. Normalized Lyα throughput, however, shows significant correlations: escape is found to be higher in galaxies of lower star formation rate, dust content, mass, and nebular quantities that suggest harder ionizing continuum and lower metallicity. Six galaxies would be selected as high-z Lyα emitters, based upon their luminosity and EW. We discuss the results in the context of high-z Lyα and UV samples. A few galaxies have EWs above 50 Å, and one shows f{sub esc}{sup Lyα} of 80%; such objects have not previously been reported at low-z.

  8. How to Directly Image a Habitable Planet Around Alpha Centauri with a ~30-45cm Space Telescope

    CERN Document Server

    Belikov, Ruslan; Thomas, Sandrine; Males, Jared; Lozi, Julien

    2015-01-01

    Several mission concepts are being studied to directly image planets around nearby stars. It is commonly thought that directly imaging a potentially habitable exoplanet around a Sun-like star requires space telescopes with apertures of at least 1m. A notable exception to this is Alpha Centauri (A and B), which is an extreme outlier among FGKM stars in terms of apparent habitable zone size: the habitable zones are ~3x wider in apparent size than around any other FGKM star. This enables a ~30-45cm visible light space telescope equipped with a modern high performance coronagraph or starshade to resolve the habitable zone at high contrast and directly image any potentially habitable planet that may exist in the system. We presents a brief analysis of the astrophysical and technical challenges involved with direct imaging of Alpha Centauri with a small telescope and describe two new technologies that address some of the key technical challenges. In particular, the raw contrast requirements for such an instrument c...

  9. Extreme Ultraviolet Variability Experiment (EVE) on the Solar Dynamics Observatory (SDO): Overview of Science Objectives, Instrument Design, Data Products, and Model Developments

    Science.gov (United States)

    Woods, T. N.; Eparvier, F. G.; Hock, R.; Jones, A. R.; Woodraska, D.; Judge, D.; Didkovsky, L.; Lean, J.; Mariska, J.; Warren, H.; McMullin, D.; Chamberlin, P.; Berthiaume, G.; Bailey, S.; Fuller-Rowell, T.; Sojka, J.; Tobiska, W. K.; Viereck, R.

    2010-01-01

    The highly variable solar extreme ultraviolet (EUV) radiation is the major energy input to the Earth's upper atmosphere, strongly impacting the geospace environment, affecting satellite operations, communications, and navigation. The Extreme ultraviolet Variability Experiment (EVE) onboard the NASA Solar Dynamics Observatory (SDO) will measure the solar EUV irradiance from 0.1 to 105 nm with unprecedented spectral resolution (0.1 nm), temporal cadence (ten seconds), and accuracy (20%). EVE includes several irradiance instruments: The Multiple EUV Grating Spectrographs (MEGS)-A is a grazingincidence spectrograph that measures the solar EUV irradiance in the 5 to 37 nm range with 0.1-nm resolution, and the MEGS-B is a normal-incidence, dual-pass spectrograph that measures the solar EUV irradiance in the 35 to 105 nm range with 0.1-nm resolution. To provide MEGS in-flight calibration, the EUV SpectroPhotometer (ESP) measures the solar EUV irradiance in broadbands between 0.1 and 39 nm, and a MEGS-Photometer measures the Sun s bright hydrogen emission at 121.6 nm. The EVE data products include a near real-time space-weather product (Level 0C), which provides the solar EUV irradiance in specific bands and also spectra in 0.1-nm intervals with a cadence of one minute and with a time delay of less than 15 minutes. The EVE higher-level products are Level 2 with the solar EUV irradiance at higher time cadence (0.25 seconds for photometers and ten seconds for spectrographs) and Level 3 with averages of the solar irradiance over a day and over each one-hour period. The EVE team also plans to advance existing models of solar EUV irradiance and to operationally use the EVE measurements in models of Earth s ionosphere and thermosphere. Improved understanding of the evolution of solar flares and extending the various models to incorporate solar flare events are high priorities for the EVE team.

  10. Ionospheric and Thermospheric Imaging from Geosynchronous Orbit

    Science.gov (United States)

    McCoy, R. P.; Wood, K.; Dymond, K. F.; Thonnard, S. E.; Cannon, K.; Makela, J.

    2001-12-01

    The Office of Naval Research is sponsoring the development of an ultraviolet imaging system to test the concept of real-time synoptic observations of the ionosphere and thermosphere from geosynchronous orbit. The observational hardware consists of two ultraviolet telescopes mounted to a two-axis gimbal to measure airglow radiances on the disk and limb of the Earth. A far-ultraviolet telescope will use a filter wheel with filters to image atomic oxygen emission at 130.4 nm, 135.6 nm, and molecular nitrogen emission at 143.0 nm. An extreme-ultraviolet telescope will image the oxygen ion airglow at 83.4 nm. The oxygen emission measurements will be used to infer nightside ionospheric total electron content (TEC) on the disk and electron density profiles on the limb. On the dayside the oxygen ion measurements will be used to determine electron density profiles, and the oxygen and nitrogen measurements will be used to infer thermospheric neutral density profiles on the limb and O/N2 ratios on the disk. The telescope fields of view cover a 1000 km x 1000 km region with 10 km x 10 km resolution. A goal for nightside TEC measurements is to obtain images with 100 second integrations and to be able to track ionospheric irregularities in real time as "weather systems". Ratios of oxygen nightglow measurements will be used to explore the possibility of providing three dimensional measurements of the ionosphere. These telescopes will be mounted aboard an Air Force Space Test Program satellite which will be launched into geosynchronous orbit over the continental U. S. for about year and then moved over the Indian Ocean for an additional seven years.

  11. Imaging with LINC-NIRVANA, the Fizeau interferometer of the Large Binocular Telescope: state of the art and open problems

    Science.gov (United States)

    Bertero, M.; Boccacci, P.; La Camera, A.; Olivieri, C.; Carbillet, M.

    2011-11-01

    LINC-NIRVANA (LN) is the Fizeau interferometer of the Large Binocular Telescope which consists of two 8.4 m mirrors with a center-to-center distance of 14.4 m, hence providing a maximum path of 22.8 m in the direction of the baseline joining the two centers. LN is a true imager since interference occurs in the focal plane and not in the aperture plane as with essentially all the existing interferometers. However, an LN image is characterized by an anisotropic resolution: that of a 22.8 m mirror in the direction of the baseline and that of a 8.4 m mirror in the orthogonal direction. In order to obtain a unique image with a high and isotropic resolution, several images must be detected with different orientations of the baseline and suitably processed. Therefore, the instrument will routinely require the use of image reconstruction methods for providing astronomical images with unprecedented resolution, in principle ten times the resolution of the Hubble Space Telescope. This review concerns the image reconstruction problem for LN and is based essentially on our work. After a description of the main features of the telescope and of the interferometer, it contains a discussion of the problem and of the approximations introduced in its formulation. In short, it is reduced to multiple-image deconvolution with Poisson data. Similarity with the image reconstruction problem in emission tomography is stressed and utilized for introducing suitable iterative reconstruction methods. These methods are extended to regularized versions of the problem. Efficiency is another important issue because the size of LN images is of the order of 4.2 megapixels; therefore, acceleration methods are also discussed. All methods are tested on synthetic images because, even if the instrument is in an advanced stage of realization, it will be presumably operative in 2014. The algorithms of the proposed image reconstruction methods are implemented in the Software Package AIRY (astronomical image

  12. THE RELATIONSHIP BETWEEN EXTREME ULTRAVIOLET NON-THERMAL LINE BROADENING AND HIGH-ENERGY PARTICLES DURING SOLAR FLARES

    Energy Technology Data Exchange (ETDEWEB)

    Kawate, T. [Kwasan and Hida Observatory, Kyoto University, Kurabashira, Kamitakaracho, Takayama, Gifu 506-1314 (Japan); Imada, S. [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka, Tokyo 181-8588 (Japan)

    2013-10-01

    We have studied the relationship between the location of EUV non-thermal broadening and high-energy particles during large flares using the EUV Imaging Spectrometer on board Hinode, the Nobeyama Radio Polarimeter, the Nobeyama Radioheliograph, and the Atmospheric Imaging Assembly on board the Solar Dynamic Observatory. We have analyzed five large flare events that contain thermal-rich, intermediate, and thermal-poor flares classified by the definition discussed in the paper. We found that, in the case of thermal-rich flares, the non-thermal broadening of Fe XXIV occurred at the top of the flaring loop at the beginning of the flares. The source of 17 GHz microwaves is located at the footpoint of the flare loop. On the other hand, in the case of intermediate/thermal-poor flares, the non-thermal broadening of Fe XXIV occurred at the footpoint of the flare loop at the beginning of the flares. The source of 17 GHz microwaves is located at the top of the flaring loop. We discussed the difference between thermal-rich and intermediate/thermal-poor flares based on the spatial information of non-thermal broadening, which may provide clues that the presence of turbulence plays an important role in the pitch angle scattering of high-energy electrons.

  13. JET ROTATION INVESTIGATED IN THE NEAR-ULTRAVIOLET WITH THE HUBBLE SPACE TELESCOPE IMAGING SPECTROGRAPH

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, Deirdre; Ray, Thomas P. [Dublin Institute for Advanced Studies, 31 Fitzwilliam Place, Dublin 2, Republic of Ireland (Ireland); Rigliaco, Elisabetta; Bacciotti, Francesca [INAF-Osservatorio Astrofisico di Arcetri, Largo E. Fermi 5, 50125 Firenze (Italy); Eisloeffel, Jochen, E-mail: dac@cp.dias.ie [Thueringer Landessternwarte Tautenburg, Sternwarte 5, 07778 Tautenburg (Germany)

    2012-04-20

    We present results of the second phase of our near-ultraviolet investigation into protostellar jet rotation using the Hubble Space Telescope Imaging Spectrograph. We obtain long-slit spectra at the base of five T Tauri jets to determine if there is a difference in radial velocity between the jet borders which may be interpreted as a rotation signature. These observations are extremely challenging and push the limits of current instrumentation, but have the potential to provide long-awaited observational support for the magnetocentrifugal mechanism of jet launching in which jets remove angular momentum from protostellar systems. We successfully detect all five jet targets (from RW Aur, HN Tau, DP Tau, and CW Tau) in several near-ultraviolet emission lines, including the strong Mg II doublet. However, only RW Aur's bipolar jet presents a sufficiently high signal-to-noise ratio to allow for analysis. The approaching jet lobe shows a difference of 10 km s{sup -1} in a direction which agrees with the disk rotation sense, but is opposite to previously published optical measurements for the receding jet. The near-ultraviolet difference is not found six months later, nor is it found in the fainter receding jet. Overall, in the case of RW Aur, differences are not consistent with a simple jet rotation interpretation. Indeed, given the renowned complexity and variability of this system, it now seems likely that any rotation signature is confused by other influences, with the inevitable conclusion that RW Aur is not suited to a jet rotation study.

  14. THE STAR FORMATION HISTORY OF LEO T FROM HUBBLE SPACE TELESCOPE IMAGING

    Energy Technology Data Exchange (ETDEWEB)

    Weisz, Daniel R.; Dalcanton, Julianne J.; Gilbert, Karoline M.; Williams, Benjamin F. [Department of Astronomy, Box 351580, University of Washington, Seattle, WA 98195 (United States); Zucker, Daniel B. [Department of Physics and Astronomy, Macquarie University, Sydney 2109 (Australia); Dolphin, Andrew E. [Raytheon, 1151 E. Hermans Road, Tucson, AZ 85756 (United States); Martin, Nicolas F. [Max-Planck-Institut fuer Astronomie, Koenigstuhl 17, D-69117 Heidelberg (Germany); De Jong, Jelte T. A. [Leiden Observatory, Leiden University, Niels Bohrweg 2, 2333 Leiden (Netherlands); Holtzman, Jon A. [Department of Astronomy, New Mexico State University, Box 30001, 1320 Frenger St., Las Cruces, NM 88003 (United States); Bell, Eric F. [Department of Astronomy, University of Michigan, 500 Church St., Ann Arbor, MI 48109 (United States); Belokurov, Vasily; Evans, N. Wyn, E-mail: dweisz@astro.washington.edu [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom)

    2012-04-01

    We present the star formation history (SFH) of the faintest known star-forming galaxy, Leo T, based on deep imaging taken with the Hubble Space Telescope (HST) Wide Field Planetary Camera 2 (WFPC2). The HST/WFPC2 color-magnitude diagram (CMD) of Leo T is exquisitely deep, extending {approx}2 mag below the oldest main-sequence turnoff, permitting excellent constraints on star formation at all ages. We use a maximum likelihood CMD fitting technique to measure the SFH of Leo T assuming three different sets of stellar evolution models: Padova (solar-scaled metallicity) and BaSTI (both solar-scaled and {alpha}-enhanced metallicities). The resulting SFHs are remarkably consistent at all ages, indicating that our derived SFH is robust to the choice of stellar evolution model. From the lifetime SFH of Leo T, we find that 50% of the total stellar mass formed prior to z {approx} 1 (7.6 Gyr ago). Subsequent to this epoch, the SFH of Leo T is roughly constant until the most recent {approx}25 Myr, where the SFH shows an abrupt drop. This decrease could be due to a cessation of star formation or stellar initial mass function sampling effects, but we are unable to distinguish between the two scenarios. Overall, our measured SFH is consistent with previously derived SFHs of Leo T. However, the HST-based solution provides improved age resolution and reduced uncertainties at all epochs. The SFH, baryonic gas fraction, and location of Leo T are unlike any of the other recently discovered faint dwarf galaxies in the Local Group, and instead bear strong resemblance to gas-rich dwarf galaxies (irregular or transition), suggesting that gas-rich dwarf galaxies may share common modes of star formation over a large range of stellar mass ({approx}10{sup 5}-10{sup 9} M{sub Sun }).

  15. Wide field imager instrument for the Advanced Telescope for High Energy Astrophysics

    Science.gov (United States)

    Meidinger, Norbert; Nandra, Kirpal; Plattner, Markus; Porro, Matteo; Rau, Arne; Santangelo, Andrea; Tenzer, Chris; Wilms, Jörn

    2015-01-01

    The Advanced Telescope for High Energy Astrophysics (Athena) has been selected for ESA's L2 mission, scheduled for launch in 2028. It will provide the necessary capabilities to achieve the ambitious goals of the science theme "The Hot and Energetic Universe." Athena's x-ray mirrors will be based on silicon pore optics technology with a 12-m focal length. Two complementary focal plane camera systems are foreseen, which can be moved interchangeably to the focus of the mirror system: the actively shielded micro-calorimeter spectrometer X-IFU and the wide field imager (WFI). The WFI camera will provide an unprecedented survey power through its large field of view of 40 arc min with a high count-rate capability (˜1 Crab). It permits a state-of-the-art energy resolution in the energy band of 0.1 to 15 keV during the entire mission lifetime (e.g., full width at half maximum ≤150 eV at 6 keV). This performance is accomplished by a set of depleted P-channel field effect transistor (DEPFET) active pixel sensor matrices with a pixel size well suited to the angular resolution of 5 arc sec (on-axis) of the mirror system. Each DEPFET pixel is a combined detector-amplifier structure with a MOSFET integrated onto a fully depleted 450-μm-thick silicon bulk. This manuscript will summarize the current instrument concept and design, the status of the technology development, and the envisaged baseline performance.

  16. Unique Spectroscopy and Imaging of Mars with the James Webb Space Telescope

    Science.gov (United States)

    Villanueva, Geronimo L.; Altieri, Francesca; Clancy, R. Todd; Encrenaz, Therese; Fouchet, Thierry; Hartogh, Paul; Lellouch, Emmanuel; Lopez-Valverde, Miguel A.; Mumma, Michael J.; Novak, Robert E.; hide

    2016-01-01

    In this paper, we summarize the main capabilities of the James Webb Space Telescope (JWST) for performing observations of Mars. The distinctive vantage point of JWST at the Sun-Earth Lagrange point (L2) will allow sampling the full observable disk, permitting the study of short-term phenomena, diurnal processes (across the east-west axis), and latitudinal processes between the hemispheres (including seasonal effects) with excellent spatial resolutions (0.''07 at 2 micron). Spectroscopic observations will be achievable in the 0.7-5 micron spectral region with NIRSpec at a maximum resolving power of 2700 and with 8000 in the 1-1.25 micron range. Imaging will be attainable with the Near-Infrared Camera at 4.3 micrometers and with two narrow filters near 2 micron, while the nightside will be accessible with several filters in 0.5 to 2 micron. Such a powerful suite of instruments will be a major asset for the exploration and characterization of Mars. Some science cases include the mapping of the water D/H ratio, investigations of the Martian mesosphere via the characterization of the non-local thermodynamic equilibrium CO2 emission at 4.3 micron, studies of chemical transport via observations of the O2 nightglow at 1.27 micron, high-cadence mapping of the variability dust and water-ice clouds, and sensitive searches for trace species and hydrated features on the Martian surface. In-flight characterization of the instruments may allow for additional science opportunities.

  17. Design, performance prediction, and measurements of the interface region imaging spectrograph (IRIS) telescope

    Science.gov (United States)

    Podgorski, William A.; Cheimets, Peter N.; Golub, Leon; Lemen, James R.; Title, Alan M.

    2012-09-01

    This paper discusses the design of the IRIS Small Explorer (SMEX) Cassegrain telescope, as well as its intended and measured performance. Lockheed Martin, along with SAO, Montana State University, and Stanford University are developing the IRIS instrument for a mission to examine the solar spectra in two bands, one centered on 1369 Å, and the other centered on 2810 Å. SAO led the design and construction of the telescope feed, with assistance from Lockheed and Montana State University. The telescope posed a number of implementation challenges, which are discussed here, including the fact that no effective filters exist to isolate the science spectra to the exclusion of the rest of the solar flux, making it necessary to allow full sunlight into the telescope.

  18. MACHETE: A transit Imaging Atmospheric Cherenkov Telescope to survey half of the Very High Energy $\\gamma$-ray sky

    CERN Document Server

    Cortina, J; Moralejo, A

    2015-01-01

    Current Imaging Atmospheric Cherenkov Telescopes for Very High Energy $\\gamma$-ray astrophysics are pointing instruments with a Field of View up to a few tens of sq deg. We propose to build an array of two non-steerable (drift) telescopes. Each of the telescopes would have a camera with a FOV of 5$\\times$60 sq deg oriented along the meridian. About half of the sky drifts through this FOV in a year. We have performed a Montecarlo simulation to estimate the performance of this instrument. We expect it to survey this half of the sky with an integral flux sensitivity of $\\sim$0.77\\% of the steady flux of the Crab Nebula in 5 years, an analysis energy threshold of $\\sim$150 GeV and an angular resolution of $\\sim$0.1$^{\\circ}$. For astronomical objects that transit over the telescope for a specific night, we can achieve an integral sensitivity of 12\\% of the Crab Nebula flux in a night, making it a very powerful tool to trigger further observations of variable sources using steerable IACTs or instruments at other w...

  19. MACHETE: A transit imaging atmospheric Cherenkov telescope to survey half of the very high energy γ-ray sky

    Science.gov (United States)

    Cortina, J.; López-Coto, R.; Moralejo, A.

    2016-01-01

    Current imaging atmospheric Cherenkov telescopes for very high energy γ-ray astrophysics are pointing instruments with a field of view up to a few tens of sq deg. We propose to build an array of two non-steerable (drift) telescopes. Each of the telescopes would have a camera with a FOV of 5 × 60 sq deg oriented along the meridian. About half of the sky drifts through this FOV in a year. We have performed a Monte Carlo simulation to estimate the performance of this instrument. We expect it to survey this half of the sky with an integral flux sensitivity of ˜0.77% of the steady flux of the Crab Nebula in 5 years, an analysis energy threshold of ˜150 GeV and an angular resolution of ˜0.1°. For astronomical objects that transit over the telescope for a specific night, we can achieve an integral sensitivity of 12% of the Crab Nebula flux in a night, making it a very powerful tool to trigger further observations of variable sources using steerable IACTs or instruments at other wavelengths.

  20. On the maximum conversion efficiency into the 13.5-nm extreme ultraviolet emission under a steady-state laser ablation of tin microspheres

    Science.gov (United States)

    Basko, M. M.

    2016-08-01

    Theoretical investigation has been performed on the conversion efficiency (CE) into the 13.5-nm extreme ultraviolet (EUV) radiation in a scheme where spherical microspheres of tin (Sn) are simultaneously irradiated by two laser pulses with substantially different wavelengths. The low-intensity short-wavelength pulse is used to control the rate of mass ablation and the size of the EUV source, while the high-intensity long-wavelength pulse provides efficient generation of the EUV light at λ=13.5 nm. The problem of full optimization for maximizing the CE is formulated and solved numerically by performing two-dimensional radiation-hydrodynamics simulations with the RALEF-2D code under the conditions of steady-state laser illumination. It is shown that, within the implemented theoretical model, steady-state CE values approaching 9% are feasible; in a transient peak, the maximum instantaneous CE of 11.5% was calculated for the optimized laser-target configuration. The physical factors, bringing down the fully optimized steady-state CE to about one half of the absolute theoretical maximum of CE≈20 % for the uniform static Sn plasma, are analyzed in detail.

  1. A Partnership between English Language Learners and a Team of Rocket Scientists: EPO for the NASA SDO Extreme Ultraviolet Variability Experiment (EVE)

    Science.gov (United States)

    Buhr, S. M.; McCaffrey, M. S.; Eparvier, F.; Murillo, M.

    2008-05-01

    Recent immigrant high school students were successfully engaged in learning about Sun-Earth connections through a partnership with the NASA Solar Dynamics Observatory Extreme Ultraviolet Variability Experiment (EVE) project. The students were enrolled in a pilot course as part of the Math, Engineering and Science Achievement (MESA) program. The English Language Learner (ELL) students doubled their achievement on a pre- and post- assessment on the content of the course. Students learned scientific content and vocabulary in English with support in Spanish, attended field trips, hosted scientist speakers, built antenna and deployed space weather monitors as part of the Stanford SOLAR project, and gave final presentations in English, showcasing their new computer skills. Teachers who taught the students in other courses noted gains in the students' willingness to use English in class and noted gains in math skills. The course has been broken into modules for use in shorter after-school environments, or for use by EVE scientists who are outside of the Boulder area. Video footage of "The Making of a Satellite", and "All About EVE" is completed for use in the kits. Other EVE EPO includes upcoming professional development for teachers and content workshops for journalists.

  2. A Partnership between English Language Learners and a Team of Rocket Scientists: EPO for the NASA SDO Extreme-Ultraviolet Variability Experiment (EVE)

    Science.gov (United States)

    Buhr, S. M.; Eparvier, F.; McCaffrey, M.; Murillo, M.

    2007-12-01

    Recent immigrant high school students were successfully engaged in learning about Sun-Earth connections through a partnership with the NASA SDO Extreme-Ultraviolet Variability Experiment (EVE) project. The students were enrolled in a pilot course as part of the Math, Engineering and Science Achievement MESA) program. For many of the students, this was the only science option available to them due to language limitations. The English Language Learner (ELL) students doubled their achievement on a pre- and post-assessment on the content of the course. Students learned scientific content and vocabulary in English with support in Spanish, attended field trips, hosted scientist speakers, built and deployed space weather monitors as part of the Stanford SOLAR project, and gave final presentations in English, showcasing their new computer skills. Teachers who taught the students in other courses noted gains in the students' willingness to use English in class and noted gains in math skills. The MESA-EVE course won recognition as a Colorado MESA Program of Excellence and is being offered again in 2007-08. The course has been broken into modules for use in shorter after-school environments, or for use by EVE scientists who are outside of the Boulder area. Other EVE EPO includes professional development for teachers and content workshops for journalists.

  3. Attenuation from the optical to the extreme ultraviolet by dust associated with broad absorption line quasars: the driving force for outflows

    CERN Document Server

    Gaskell, C Martin; Singh, Japneet

    2016-01-01

    We use mid-IR to UV observations to derive a mean attenuation curve out to the rest-frame extreme ultraviolet (EUV) for "BAL dust" -- the dust causing the additional extinction of active galactic nuclei (AGNs) with broad absorption lines (BALQSOs). In contrast to the normal, relatively flat, mean AGN attenuation curve, BAL dust is well fit by a steeply rising, SMC-like curve. We confirm the shape of the theoretical Weingartner & Draine SMC curve out to 700 \\AA, but the drop in attenuation at still shorter wavelengths is less than predicted. The identical attenuation curve for low-ionization BALQSOs (LoBALs) does not support them being a "break out" phase in the life of AGNs. Although attenuation in the optical due to BAL dust is low ($E(B-V) \\sim 0.03 - 0.05$), the attenuation rises to one magnitude in the EUV because of the steep extinction curve. Here the dust optical depth is at the optimum value for radiative acceleration of dusty gas. Because the spectral energy distribution of AGNs peaks in the EUV ...

  4. Photoionized plasmas induced in neon with extreme ultraviolet and soft X-ray pulses produced using low and high energy laser systems

    Energy Technology Data Exchange (ETDEWEB)

    Bartnik, A.; Wachulak, P.; Fok, T.; Węgrzyński, Ł.; Fiedorowicz, H. [Institute of Optoelectronics, Military University of Technology, Kaliskiego 2, 00-908 Warsaw (Poland); Pisarczyk, T.; Chodukowski, T.; Kalinowska, Z. [Institute of Plasma Physics and Laser Microfusion, 23 Hery St., 00-908 Warsaw (Poland); Dudzak, R.; Dostal, J.; Krousky, E.; Skala, J.; Ullschmied, J.; Hrebicek, J.; Medrik, T. [Institute of Plasma Physics ASCR, Prague, Czech Republic and Institute of Physics ASCR, Prague (Czech Republic)

    2015-04-15

    A comparative study of photoionized plasmas created by two soft X-ray and extreme ultraviolet (SXR/EUV) laser plasma sources with different parameters is presented. The two sources are based on double-stream Xe/He gas-puff targets irradiated with high (500 J/0.3 ns) and low energy (10 J/1 ns) laser pulses. In both cases, the SXR/EUV beam irradiated the gas stream, injected into a vacuum chamber synchronously with the radiation pulse. Irradiation of gases resulted in formation of photoionized plasmas emitting radiation in the SXR/EUV range. The measured Ne plasma radiation spectra are dominated by emission lines corresponding to radiative transitions in singly charged ions. A significant difference concerns origin of the lines: K-shell or L-shell emissions occur in case of the high and low energy irradiating system, respectively. In high energy system, the electron density measurements were also performed by laser interferometry, employing a femtosecond laser system. A maximum electron density for Ne plasma reached the value of 2·10{sup 18 }cm{sup −3}. For the low energy system, a detection limit was too high for the interferometric measurements, thus only an upper estimation for electron density could be made.

  5. High-order nonlinear optical processes in ablated carbon-containing materials: Recent approaches in development of the nonlinear spectroscopy using harmonic generation in the extreme ultraviolet range

    Science.gov (United States)

    Ganeev, R. A.

    2017-08-01

    The nonlinear spectroscopy using harmonic generation in the extreme ultraviolet range became a versatile tool for the analysis of the optical, structural and morphological properties of matter. The carbon-contained materials have shown the advanced properties among other studied species, which allowed both the definition of the role of structural properties on the nonlinear optical response and the analysis of the fundamental features of carbon as the attractive material for generation of coherent short-wavelength radiation. We review the studies of the high-order harmonic generation by focusing ultrashort pulses into the plasmas produced during laser ablation of various organic compounds. We discuss the role of ionic transitions of ablated carbon-containing molecules on the harmonic yield. We also show the similarities and distinctions of the harmonic and plasma spectra of organic compounds and graphite. We discuss the studies of the generation of harmonics up to the 27th order (λ = 29.9 nm) of 806 nm radiation in the boron carbide plasma and analyze the advantages and disadvantages of this target compared with the ingredients comprising B4C (solid boron and graphite) by comparing plasma emission and harmonic spectra from three species. We also show that the coincidence of harmonic and plasma emission wavelengths in most cases does not cause the enhancement or decrease of the conversion efficiency of this harmonic.

  6. Nonlinear Dichroism in Back-to-Back Double Ionization of He by an Intense Elliptically Polarized Few-Cycle Extreme Ultraviolet Pulse.

    Science.gov (United States)

    Ngoko Djiokap, J M; Manakov, N L; Meremianin, A V; Hu, S X; Madsen, L B; Starace, Anthony F

    2014-11-28

    Control of double ionization of He by means of the polarization and carrier-envelope phase (CEP) of an intense, few-cycle extreme ultraviolet (XUV) pulse is demonstrated numerically by solving the six-dimensional two-electron, time-dependent Schrödinger equation for He interacting with an elliptically polarized XUV pulse. Guided by perturbation theory (PT), we predict the existence of a nonlinear dichroic effect (∝I^{3/2}) that is sensitive to the CEP, ellipticity, peak intensity I, and temporal duration of the pulse. This dichroic effect (i.e., the difference of the two-electron angular distributions for opposite helicities of the ionizing XUV pulse) originates from interference of first- and second-order PT amplitudes, allowing one to probe and control S- and D-wave channels of the two-electron continuum. We show that the back-to-back in-plane geometry with unequal energy sharing is an ideal one for observing this dichroic effect that occurs only for an elliptically polarized, few-cycle attosecond pulse.

  7. High brightness extreme ultraviolet (at 13.5 nm) emission from time-of-flight controlled discharges with coaxial fuel injection

    Science.gov (United States)

    Hosokai, Tomonao; Yokoyama, Takuma; Zhidkov, Alexei; Sato, Hiroto; Horioka, Kazuhiko; Hotta, Eiki

    2008-09-01

    Extreme ultraviolet (EUV) emission from discharge produced plasma with the coaxial injection of fuel vapor (tin and lithium) produced by laser ablation is experimentally studied. Multiple plasma pinches preceding a strong and long recombination radiation of EUV are observed in the first half cycle of a sinusoidal discharge current. Due to the time-of-flight control type of the discharge, the shape of pinch radiation pulses is almost identical. With the coaxial injection of time-of-flight controlled discharges, the highest brightness of EUV emission (maximum extracted energy of 244.3 mJ/2π sr per pulse with the emitter size of ˜1×0.3 mm2 in full width at half maximum) is provided with efficiency exceeding 2% of deposited energy into the plasma (or 1% of dissipated energy in the discharge) due to a much better matching with the optimal plasma parameters in the recombination regime and a decrease in the off-duty factor. Stability of emitting plasma of the repetitive pinches is essentially improved with use of a second laser pulse.

  8. Reply to “Comment on ‘Ultrafast Demagnetization Measurements Using Extreme Ultraviolet Light: Comparison of Electronic and Magnetic Contributions’ ”

    Directory of Open Access Journals (Sweden)

    Emrah Turgut

    2013-09-01

    Full Text Available In the following, we show that the conclusions of our article titled “Ultrafast Demagnetization Measurements Using Extreme Ultraviolet Light: Comparison of Electronic and Magnetic Contributions” are correct. The Comment of Vodungbo et al. argues that a unique determination of the refractive index variation over time is not possible using the data set presented in our paper. Furthermore, it was suggested that the lack of uniqueness allows for the possibility of a very specific time-dependent trajectory of the refractive index in the complex plane that could give rise to a large nonmagnetic modulation of the measured asymmetry, in spite of a negligible change in the s-polarized reflectivity. In this Reply, we conclusively show that any nonmagnetic contribution to the measured asymmetry is indeed negligible (<2%, below the noise level of the magnetic-asymmetry measurements. First, we use a few additional measurements to unambiguously rule out the presence of any nonmagnetic contributions to the signal. Second, we show that the scenario proposed by Vodungbo et al. would require both exotic time and energy dependences of the refractive index near the M edge that are extremely unlikely (virtually impossible in real materials. Thus, the conclusions of our original article are preserved.

  9. First measurements of highly ionized impurity emission distribution by grazing-incidence flat-field extreme ultraviolet spectrometer in HL-2A.

    Science.gov (United States)

    Cui, Zhengying; Dong, Chunfeng; Zhou, Hangyu; Morita, Shigeru; Sun, Ping; Fu, Bingzhong; Lu, Ping; Ding, Xuantong; Yang, Qingwei; Duan, Xuru

    2014-11-01

    A space-resolved grazing-incidence flat-field extreme ultraviolet (EUV) spectrometer has been developed in the HL-2A tokamak to measure vertical impurity emission profiles with simultaneous spectral, temporal, and spatial resolution. The spectrometer working in the wavelength range of 30-500 Å has been equipped with a gold-coated varied-line-spacing holographic grating with curvature of 5606 mm and a back illuminated charge-coupled device with size of 6.6 × 26.6 mm(2) (255 × 1024 pixels). A lower half of the HL-2A plasma with averaged minor radius of 40 cm is observed when the spectrometer with horizontal dispersion is placed at a distance of 7.5 m away from the plasma center. An excellent spatial resolution of 12 mm is achieved when a space-resolved slit with vertical width of 0.5 mm is adopted. The radial profiles of intrinsic impurities in several ionization stages have been measured with high throughput and extremely low stray light.

  10. The process of data formation for the Spectrometer/Telescope for Imaging X-rays (STIX) in Solar Orbiter

    CERN Document Server

    Giordano, Sara; Piana, Michele; Massone, Anna Maria

    2014-01-01

    The Spectrometer/Telescope for Imaging X-rays (STIX) is a hard X-ray imaging spectroscopy device to be mounted in the Solar Orbiter cluster with the aim of providing images and spectra of solar flaring regions at different photon energies in the range from a few keV to around 150 keV. The imaging modality of this telescope is based on the Moire pattern concept and utilizes 30 sub-collimators, each one containing a pair of co-axial grids. This paper applies Fourier analysis to provide the first rigorous description of the data formation process in STIX. Specifically, we show that, under first harmonic approximation, the integrated counts measured by STIX sub-collimators can be interpreted as specific spatial Fourier components of the incoming photon flux, named visibilities. Fourier analysis also allows the quantitative assessment of the reliability of such interpretation. The description of STIX data in terms of visibilities has a notable impact on the image reconstruction process, since it fosters the applic...

  11. Two-channel imaging system for the White light Active Region Monitor (WARM) telescope at Kodaikanal Observatory: design, development, and first images

    Science.gov (United States)

    Pruthvi, Hemanth; Ramesh, K. B.

    2015-06-01

    One of the three planned back-end systems for the proposed National Large Solar Telescope (NLST) is the Solar Dynamics Imaging System (SDIS) which is intended to obtain near simultaneous images in multiple wavelengths. As a first step, a prototype system with two channel imaging has been developed and installed at the back-end of the White light Active Region Monitor (WARM) telescope at Kodaikanal Observatory. A two-mirror Coelostat serves as a light feeding system to a refracting objective while an optical breadboard serves as a platform for the back-end instruments. A re-imaging system is used before the prime focus to get two light channels for the observations in two wavelengths. The re-imaging system is designed using ZEMAX and the alignment of the system is done using a laser. Full disk images are obtained using a red filter (674.2nm/10nm) and a G-band filter (430.5nm/0.84nm). Design aspects of the re-imaging system, preliminary observations and image reduction methods are described in this paper.

  12. Feasibility of VHE gamma ray detection by an array of imaging atmospheric Cherenkov telescopes using the fluorescence technique

    CERN Document Server

    Contreras, J L; Arqueros, F; López, M; Barrio, J A; Nievas, M

    2015-01-01

    The last 20 years have seen the development of new techniques in Astroparticle Physics providing access to the highest end of the electromagnetic spectrum. It has been shown that some sources emit photons up to energies close to 100 TeV. Yet the fluxes of these photons are incredibly low and new detection techniques are needed to go higher in energy. A new technique that would use the new generation of Cherenkov Telescopes, i.e., the Cherenkov Telescope Array (CTA), is proposed to push further the energy frontier. It is based on the detection of the fluorescence radiation emitted in extensive air showers, a successful method used in ultra-high-energy cosmic ray experiments, like the Pierre Auger Observatory. It would complement the standard imaging atmospheric Cherenkov technique with only minor modifications of the hardware currently being developed for the CTA and would not imply significant extra costs during its planned operation.

  13. Comparison of coronagraphs for high contrast imaging in the context of Extremely Large Telescopes

    CERN Document Server

    Martínez, P; Kasper, M; Cavarroc, C; Yaitskova, N; Fusco, T; Verinaud, C

    2008-01-01

    We compare coronagraph concepts and investigate their behavior and suitability for planet finder projects with Extremely Large Telescopes (ELTs, 30-42 meters class telescopes). For this task, we analyze the impact of major error sources that occur in a coronagraphic telescope (central obscuration, secondary support, low-order segment aberrations, segment reflectivity variations, pointing errors) for phase, amplitude and interferometric type coronagraphs. This analysis is performed at two different levels of the detection process: under residual phase left uncorrected by an eXtreme Adaptive Optics system (XAO) for a large range of Strehl ratio and after a general and simple model of speckle calibration, assuming common phase aberrations between the XAO and the coronagraph (static phase aberrations of the instrument) and non-common phase aberrations downstream of the coronagraph (differential aberrations provided by the calibration unit). We derive critical parameters that each concept will have to cope with by...

  14. Background and Scattered-Light Subtraction in the High-Resolution Echelle Modes of the Space Telescope Imaging Spectrograph

    Science.gov (United States)

    Howk, J. Christopher; Sembach, Kenneth R.

    2000-05-01

    We present a simple, effective approach for estimating the on-order backgrounds of spectra taken with the highest resolution modes of the Space Telescope Imaging Spectrograph (STIS) on board the Hubble Space Telescope. Our scheme for determining the on-order background spectrum for STIS E140H and E230H observations uses moderate-order polynomial fits to the interorder scattered light visible in the two-dimensional STIS MAMA images. We present a suite of high-resolution STIS spectra to demonstrate that our background-subtraction routine produces the correct overall zero point as judged by the small residual flux levels in the centers of strongly saturated interstellar absorption lines. Although there are multiple sources of background light in STIS echelle mode data, this simple approach works very well for wavelengths longward of Lyα (λ>~1215 Å). At shorter wavelengths, the smaller order separation and generally lower signal-to-noise ratios of the data can reduce the effectiveness of our background estimation procedure. Slight artifacts in the background-subtracted spectrum can be seen in some cases, particularly at wavelengths of B2B and the GHRS first-order G160M observations of the early-type star HD 218915. We find no significant differences between the GHRS data and the STIS data reduced with our method in either case. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the data archive at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.

  15. Proper motion of the Draco dwarf galaxy based on Hubble space telescope imaging

    Energy Technology Data Exchange (ETDEWEB)

    Pryor, Carlton [Dept. of Physics and Astronomy, Rutgers, the State University of New Jersey, 136 Frelinghuysen Rd., Piscataway, NJ 08854-8019 (United States); Piatek, Slawomir [Dept. of Physics, New Jersey Institute of Technology, Newark, NJ 07102 (United States); Olszewski, Edward W., E-mail: pryor@physics.rutgers.edu, E-mail: piatek@physics.rutgers.edu, E-mail: eolszewski@as.arizona.edu [Steward Observatory, The University of Arizona, Tucson, AZ 85721 (United States)

    2015-02-01

    We have measured the proper motion of the Draco dwarf galaxy using images at two epochs with a time baseline of about two years taken with the Hubble Space Telescope Advanced Camera for Surveys. Wide Field Channels 1 and 2 provide two adjacent fields, each containing a known QSO. The zero point for the proper motion is determined using both background galaxies and the QSOs and the two methods produce consistent measurements within each field. Averaging the results from the two fields gives a proper motion in the equatorial coordinate system of (μ{sub α},μ{sub δ})=(17.7±6.3,−22.1±6.3) mas century{sup −1} and in the Galactic coordinate system of (μ{sub ℓ},μ{sub b})=(−23.1±6.3,−16.3±6.3) mas century{sup −1}. Removing the contributions of the motion of the Sun and of the LSR to the measured proper motion yields a Galactic rest-frame proper motion of (μ{sub α}{sup Grf},μ{sub δ}{sup Grf})=(51.4±6.3,−18.7±6.3) mas century{sup −1} and (μ{sub ℓ}{sup Grf},μ{sub b}{sup Grf})=(−21.8±6.3,−50.1±6.3) mas century{sup −1}. The implied space velocity with respect to the Galactic center is (Π,Θ,Z)=(27±14,89±25,−212±20) km s{sup −1}. This velocity implies that the orbital inclination is 70{sup ∘}, with a 95% confidence interval of (59{sup ∘},80{sup ∘}), and that the plane of the orbit is consistent with that of the vast polar structure (VPOS) of Galactic satellite galaxies.

  16. Long term performance evaluation of the TACTIC imaging telescope using ∼400 h Crab Nebula observation during 2003–2010

    Indian Academy of Sciences (India)

    A K Tickoo; R Koul; R C Rannot; K K Yadav; P Chandra; V K Dhar; M K Koul; M Kothari; N K Agarwal; A Goyal; H C Goyal; S Kotwal; N Kumar; P Marandi; K Venugopal; K Chanchalani; N Bhatt; S Bhattacharyya; C Borwankar; N Chouhan; S R Kaul; A K Mitra; S Sahaynathan; M Sharma; K K Singh; C K Bhat

    2014-03-01

    The TeV atmospheric Cherenkov telescope with imaging camera (TACTIC) -ray telescope has been in operation at Mt. Abu, India since 2001 to study TeV -ray emission from celestial sources. During the last 10 years, apart from consistently detecting a steady signal from the Crab Nebula above ∼1.2 TeV energy, at a sensitivity level of ∼5.0 in ∼25 h, the telescope has also detected flaring activity from Mrk 421 and Mrk 501 on several occasions. Although we used Crab Nebula data partially, in some of the reported results, primarily for testing the validity of the full data analysis chain, the main aim of this work is to study the long term performance of the TACTIC telescope by using consolidated data collected between 2003 and 2010. The total on-source data, comprising ∼402 h, yields an excess of ∼(3742±192) -ray events with a statistical significance of ∼19.9 . The off-source data, comprising ∼107 h of observation, is found to be consistent with a no-emission hypothesis, as expected. The resulting -ray rate for the onsource data is determined to be ∼(9.31±0.48) h-1. A power law fit (d/d = $f_0E^{−}$) with $f_0 \\tilde (2.66 ± 0.29) × 10^{−11}$ cm-2 s-1 TeV-1 and $ \\tilde$ 2.56 ± 0.10 is found to provide reasonable fit to the inferred differential spectrum within statistical uncertainties. The spectrum matches reasonably well with that obtained by other groups. A brief summary of the improvements in the various subsystems of the telescope carried out recently, which has resulted in a substantial improvement in its detection sensitivity (viz., ∼5 in an observation period of ∼13 h as compared to ∼25 h earlier) are also presented in this paper. Encouraged by the detection of strong -ray signals from Mrk 501 and Mrk 421 on several occasions, there is considerable scope for the TACTIC telescope to monitor similar TeV -ray emission activity from other active galactic nuclei on a long-term basis.

  17. The Black Hole Mass-Bulge Luminosity Relationship for Active Galactic Nuclei From Reverberation Mapping and Hubble Space Telescope Imaging

    DEFF Research Database (Denmark)

    Bentz, Misty C.; Peterson, Bradley M.; Pogge, Richard W.

    2009-01-01

    We investigate the relationship between black hole mass and bulge luminosity for active galactic nuclei (AGNs) with reverberation-based black hole mass measurements and bulge luminosities from two-dimensional decompositions of Hubble Space Telescope host galaxy images. We find that the slope...... of the relationship for AGNs is 0.76-0.85 with an uncertainty of ~0.1, somewhat shallower than the M BH vprop L 1.0±0.1 relationship that has been fit to nearby quiescent galaxies with dynamical black hole mass measurements. This difference is somewhat perplexing, as the AGN black hole masses include an overall...

  18. An accelerated direct demodulation method for image reconstruction using spherical data from the hard X-ray modulation telescope

    Institute of Scientific and Technical Information of China (English)

    Zhuo-Xi Huo; Jian-Feng Zhou

    2013-01-01

    The hard X-ray modulation telescope (HXMT) mission is mainly devoted to performing an all-sky survey at 1-250 keV with both high sensitivity and high spatial resolution.The observed data reduction as well as the image reconstruction for HXMT can be achieved by using the direct demodulation method (DDM).However the original DDM is too computationally expensive for multi-dimensional data with high resolution to be employed for HXMT data.We propose an accelerated direct demodulation method especially adapted for data from HXMT.Simulations are also presented to demonstrate this method.

  19. Space Telescope Imaging Spectrograph Observations of High-Velocity Interstellar Absorption-Line Profiles in the Carina Nebula

    Science.gov (United States)

    Walborn, Nolan R.; Danks, Anthony C.; Vieira, Gladys; Landsman, Wayne B.

    2002-06-01

    An atlas of ultraviolet interstellar absorption-line profiles toward four stars in the Carina Nebula is presented. The observations have been made with the Space Telescope Imaging Spectrograph on the Hubble Space Telescope, with a resolving power of 114,000. Low-ionization, high-ionization, and excited-state lines from a wide array of chemical species are included. Extensive measurements of radial velocities, velocity dispersions, and column densities of individual components in these profiles are also given. The unprecedented capabilities of STIS reveal many more velocity components than previously known; most of the high-velocity components in previous observations with the International Ultraviolet Explorer are now resolved into multiple subcomponents, and even higher velocities are seen. The great range of line strengths available permits the detection of the low-velocity components in the weakest lines, and progressively higher velocities in stronger lines (in which the low-velocity components become completely blended). The weak and high-ionization lines trace global structure in the H II region, while the strong low-ionization lines show intricate high-velocity structure that likely originates relatively near to the O stars observed. The extreme velocities found in the low-ionization lines toward these four stars are -388 and +127 km s-1, with 23-26 resolved components in each. Some components in different stars may be related, but many are different in each line of sight. A remarkably well-defined Routly-Spitzer effect is found in this region. Temporal variations toward one star observed twice have already been reported. These measurements will be used in subsequent astrophysical analyses to further constrain the origins of the phenomena. Based on observations with the NASA/ESA Hubble Space Telescope obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract

  20. IBIS: An Interferometer-Based Imaging System for Detecting Extrasolar Planets with a Next Generation Space Telescope

    Science.gov (United States)

    Diner, David J.

    1989-01-01

    The direct detection of extrasolar planetary systems is a challenging observational objective. The observing system must be able to detect faint planetary signals against the background of diffracted and scattered starlight, zodiacal light, and in the IR, mirror thermal radiation. As part of a JPL study, we concluded that the best long-term approach is a 10-20 m filled-aperture telescope operating in the thermal IR (10-15 microns). At these wavelengths, the star/planet flux ratio is on the order of 10(exp 6)-10(exp 8). Our study supports the work of Angel et al., who proposed a cooled 16-m IR telescope and a special apodization mask to suppress the stellar light within a limited angular region around the star. Our scheme differs in that it is capable of stellar suppression over a much broader field-of- view, enabling more efficient planet searches. To do this, certain key optical signal-processing components are needed, including a coronagraph to apodize the stellar diffraction pattern, an infrared interferometer to provide further starlight suppression, a complementary visible-wavelength interferometer to sense figure errors in the telescope optics, and a deformable mirror to adaptively compensate for these errors. Because of the central role of interferometry we have designated this concept the Interferometer-Based Imaging System (IBIS). IBIS incorporates techniques originally suggested by Ken Knight for extrasolar planet detection at visible wavelengths. The type of telescope discussed at this workshop is well suited to implementation of the IBIS concept.

  1. The Africa Millimetre Telescope

    Science.gov (United States)

    Backes, M.; Müller, C.; Conway, J. E.; Deane, R.; Evans, R.; Falcke, H.; Fraga-Encinas, R.; Goddi, C.; Klein Wolt, M.; Krichbaum, T. P.; MacLeod, G.; Ribeiro, V. A. R. M.; Roelofs, F.; Shen, Z. Q.; van Langevelde, H. J.

    It is believed that supermassive black holes are found in the centres of galaxies, including the Milky Way. Still, only indirect evidence has been gathered for the existence of these enigmatic objects that are predicted by the general theory of relativity. With the Event Horizon Telescope, a Very Long Baseline Interferometry network of millimetre-wave (radio) telescopes, it will be possible to directly image the 'shadow' of the event horizon of the black hole at the centre of the Milky Way, Sgr A*. Although the Event Horizon Telescope utilises an extensive network of telescopes, there is a huge gap in the coverage of the u-v-plane for these observations across Africa. We discuss the benefits of adding the Africa Millimetre Telescope to the Event Horizon Telescope and present Mt. Gamsberg in Namibia as the best site for this new and first mm-wave telescope in Africa.

  2. High-contrast imager for Complex Aperture Telescopes (HiCAT): APLC/shaped-pupil hybrid coronagraph designs

    Science.gov (United States)

    N'Diaye, Mamadou; Choquet, Elodie; Carlotti, Alexis; Pueyo, Laurent; Egron, Sylvain; Leboulleux, Lucie; Levecq, Olivier; Perrin, Marshall D.; Wallace, J. Kent; Long, Chris; Lajoie, Rachel; Lajoie, Charles-Philippe; Eldorado Riggs, A. J.; Zimmerman, Neil T.; Groff, Tyler Dean; Kasdin, N. Jeremy; Vanderbei, Robert J.; Mawet, Dimitri; Macintosh, Bruce; Shaklan, Stuart; Soummer, Remi

    2015-01-01

    HiCAT is a high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. Primary mirror segmentation, central obstruction and spiders in the pupil of an on-axis telescope introduces additional diffraction features in the point spread function, which make high-contrast imaging very challenging. The testbed alignment was completed in the summer of 2014, exceeding specifications with a total wavefront error of 12nm rms with a 18mm pupil. Two deformable mirrors are to be installed for wavefront control in the fall of 2014. In this communication, we report on the first testbed results using a classical Lyot coronagraph. We have developed novel coronagraph designs combining an Apodized Pupil Lyot Coronagraph (APLC) with shaped-pupil type optimizations. We present the results of these new APLC-type solutions with two-dimensional shaped-pupil apodizers for the HiCAT geometry. These solutions render the system quasi-insensitive to jitter and low-order aberrations, while improving the performance in terms of inner working angle, bandpass and contrast over a classical APLC.

  3. An optical design of the wide-field imaging and multi-object spectrograph for an Antarctic infrared telescope

    Science.gov (United States)

    Ichikawa, Takashi; Obata, Tomokazu

    2016-08-01

    A design of the wide-field infrared camera (AIRC) for Antarctic 2.5m infrared telescope (AIRT) is presented. The off-axis design provides a 7'.5 ×7'. 5 field of view with 0".22 pixel-1 in the wavelength range of 1 to 5 μm for the simultaneous three-color bands using cooled optics and three 2048×2048 InSb focal plane arrays. Good image quality is obtained over the entire field of view with practically no chromatic aberration. The image size corresponds to the refraction limited for 2.5 m telescope at 2 μm and longer. To enjoy the stable atmosphere with extremely low perceptible water vapor (PWV), superb seeing quality, and the cadence of the polar winter at Dome Fuji on the Antarctic plateau, the camera will be dedicated to the transit observations of exoplanets. The function of a multi-object spectroscopic mode with low spectra resolution (R 50-100) will be added for the spectroscopic transit observation at 1-5 μm. The spectroscopic capability in the environment of extremely low PWV of Antarctica will be very effective for the study of the existence of water vapor in the atmosphere of super earths.

  4. Imaging Spectropolarimeter for the Multi-Application Solar Telescope at Udaipur Solar Observatory: Characterization of Polarimeter and Preliminary Observations

    Science.gov (United States)

    Tiwary, Alok Ranjan; Mathew, Shibu K.; Bayanna, A. Raja; Venkatakrishnan, P.; Yadav, Rahul

    2017-04-01

    The Multi-Application Solar Telescope (MAST) is a 50 cm off-axis Gregorian telescope that has recently become operational at the Udaipur Solar Observatory (USO). An imaging spectropolarimeter is being developed as one of the back-end instruments of MAST to gain a better understanding of the evolution and dynamics of solar magnetic and velocity fields. This system consists of a narrow-band filter and a polarimeter. The polarimeter includes a linear polarizer and two sets of liquid crystal variable retarders (LCVRs). The instrument is intended for simultaneous observations in the spectral lines 6173 Å and 8542 Å, which are formed in the photosphere and chromosphere, respectively. In this article, we present results from the characterization of the LCVRs for the spectral lines of interest and the response matrix of the polarimeter. We also present preliminary observations of an active region obtained using the spectropolarimeter. For verification purposes, we compare the Stokes observations of the active region obtained from the Helioseismic Magnetic Imager (HMI) onboard the Solar Dynamics Observatory (SDO) with that of MAST observations in the spectral line 6173 Å. We find good agreement between the two observations, considering the fact that MAST observations are limited by seeing.

  5. The Space Infrared Interferometric Telescope (SPIRIT): High-resolution imaging and spectroscopy in the far-infrared

    CERN Document Server

    Leisawitz, David; Barger, Amy; Benford, Dominic; Blain, Andrew; Boyle, Rob; Broderick, Richard; Budinoff, Jason; Carpenter, John; Caverly, Richard; Chen, Phil; Cooley, Steve; Cottingham, Christine; Crooke, Julie; DiPietro, Dave; DiPirro, Mike; Femiano, Michael; Ferrer, Art; Fischer, Jacqueline; Gardner, Jonathan P; Hallock, Lou; Harris, Kenny; Hartman, Kate; Harwit, Martin; Hillenbrand, Lynne; Hyde, Tupper; Jones, Drew; Kellogg, Jim; Kogut, Alan; Kuchner, Marc; Lawson, Bill; Lecha, Javier; Lecha, Maria; Mainzer, Amy; Mannion, Jim; Martino, Anthony; Mason, Paul; Mather, John; McDonald, Gibran; Mills, Rick; Mundy, Lee; Ollendorf, Stan; Pellicciotti, Joe; Quinn, Dave; Rhee, Kirk; Rinehart, Stephen; Sauerwine, Tim; Silverberg, Robert; Smith, Terry; Stacey, Gordon; Stahl, H Philip; Staguhn, Johannes; Tompkins, Steve; Tveekrem, June; Wall, Sheila; Wilson, Mark C

    2007-01-01

    We report results of a recently-completed pre-Formulation Phase study of SPIRIT, a candidate NASA Origins Probe mission. SPIRIT is a spatial and spectral interferometer with an operating wavelength range 25 - 400 microns. SPIRIT will provide sub-arcsecond resolution images and spectra with resolution R = 3000 in a 1 arcmin field of view to accomplish three primary scientific objectives: (1) Learn how planetary systems form from protostellar disks, and how they acquire their inhomogeneous composition; (2) characterize the family of extrasolar planetary systems by imaging the structure in debris disks to understand how and where planets of different types form; and (3) learn how high-redshift galaxies formed and merged to form the present-day population of galaxies. Observations with SPIRIT will be complementary to those of the James Webb Space Telescope and the ground-based Atacama Large Millimeter Array. All three observatories could be operational contemporaneously.

  6. Time-resolved study of the extreme-ultraviolet emission and plasma dynamics of a sub-Joule, fast capillary discharge

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, J. C., E-mail: jcval@ucsd.edu [Instituto de Físca, Pontificia Universidad Católica de Chile, Santiago (Chile); Instituto de Física, Pontificia Universidad Católica de Chile, Av. Vicuña Mackenna 4860, Macul, Santiago (Chile); Wyndham, E. S.; Favre, M. [Instituto de Física, Pontificia Universidad Católica de Chile, Av. Vicuña Mackenna 4860, Macul, Santiago (Chile)

    2015-08-15

    In this work, we discuss experimental observations on the dynamics of a fast, low energy capillary discharge when operated in argon and its properties as an intense source of extreme-ultraviolet (EUV) radiation. The discharge pre-ionization and self-triggering were accomplished by the use of the hollow cathode effect. This allowed a compact size and low inductance discharge with multi-kA current level and a quarter-period of ∼10 ns at sub-Joule energy level. We used the novel moiré and schlieren diagnostics with a 12 ps laser to obtain the time evolution of the line electron density and to study the plasma dynamics. EUV spectroscopy and filtered diodes were also implemented to estimate the plasma temperature and density throughout the evolution of the discharge. EUV source size was measured by using a filtered slit-wire camera. We observed that EUV emission starts from a compressed plasma on axis during the second quarter-period of the current and continues until the fifth quarter-period. Ionization levels from Ar VII to X were observed. By comparing the EUV emission spectra with synthetic spectra, we found that at the onset of emission (∼7 ns), the plasma is well fitted by a single Maxwellian electron distribution function with T{sub e} ∼ 12 eV and n{sub e} ∼ 10{sup 17 }cm{sup −3}. Close to peak emission (∼13 ns), plasma temperature and density increase to ∼20 eV and n{sub e} ∼ 10{sup 18 }cm{sup −3}, respectively. However, in order to successfully match the experimental data, a two component electron distribution function was necessary. Later in time, a smaller fraction in the high energy component and higher temperature suggests homogenization of the plasma. The moiré and schlieren diagnostics showed multiple radial compression-waves merging on axis throughout the discharge; they are an important heating mechanism that leads to a period of severe turbulence at peak EUV emission. It was also observed that emission

  7. Time-resolved study of the extreme-ultraviolet emission and plasma dynamics of a sub-Joule, fast capillary discharge

    Science.gov (United States)

    Valenzuela, J. C.; Wyndham, E. S.; Favre, M.

    2015-08-01

    In this work, we discuss experimental observations on the dynamics of a fast, low energy capillary discharge when operated in argon and its properties as an intense source of extreme-ultraviolet (EUV) radiation. The discharge pre-ionization and self-triggering were accomplished by the use of the hollow cathode effect. This allowed a compact size and low inductance discharge with multi-kA current level and a quarter-period of ˜10 ns at sub-Joule energy level. We used the novel moiré and schlieren diagnostics with a 12 ps laser to obtain the time evolution of the line electron density and to study the plasma dynamics. EUV spectroscopy and filtered diodes were also implemented to estimate the plasma temperature and density throughout the evolution of the discharge. EUV source size was measured by using a filtered slit-wire camera. We observed that EUV emission starts from a compressed plasma on axis during the second quarter-period of the current and continues until the fifth quarter-period. Ionization levels from Ar VII to X were observed. By comparing the EUV emission spectra with synthetic spectra, we found that at the onset of emission (˜7 ns), the plasma is well fitted by a single Maxwellian electron distribution function with Te ˜ 12 eV and ne ˜ 1017 cm-3. Close to peak emission (˜13 ns), plasma temperature and density increase to ˜20 eV and ne ˜ 1018 cm-3, respectively. However, in order to successfully match the experimental data, a two component electron distribution function was necessary. Later in time, a smaller fraction in the high energy component and higher temperature suggests homogenization of the plasma. The moiré and schlieren diagnostics showed multiple radial compression-waves merging on axis throughout the discharge; they are an important heating mechanism that leads to a period of severe turbulence at peak EUV emission. It was also observed that emission ceases when the axial maximum of the electron density collapses.

  8. Proper Motions of Dwarf Spheroidal Galaxies from Hubble Space Telescope Imaging: III. Measurement for URSA Minor

    Science.gov (United States)

    2005-07-01

    The orbit is retrograde and inclined by 124 (94 , 136 ) to the Galactic plane . Ursa Minor is not a likely member of a proposed stream of galaxies...on similar orbits around the Milky Way, nor is the plane of its orbit coincident with a recently proposed planar alignment of galaxies around the...Hubble Space Telescope (HST ). However, Carrera et al. (2002) determine (mM )0 ¼ 19:4 0:1, which gives a distance of 76 4 kpc (note an erroneous

  9. Images of Neptune's ring arcs obtained by a ground-based telescope

    Science.gov (United States)

    Sicardy, B.; Roddier, F.; Roddier, C.; Perozzi, E.; Graves, J. E.; Guyon, O.; Northcott, M. J.

    1999-08-01

    Neptune has a collection of incomplete narrow rings, known as ring arcs, which should in isolation be destroyed by differential motion in a matter of months. Yet since first discovered by stellar occultations in 1984, they appear to have persisted, perhaps through a gravitational resonance effect involving the satellite Galatea. Here we report ground-based observations of the ring arcs, obtained using an adaptive optics system. Our data, and those obtained using the Hubble Space Telescope (reported in a companion paper), indicate that the ring arcs are near, but not within the resonance with Galatea, in contrast to what is predicted by some models.

  10. RESOLVING THE FAN-SPINE RECONNECTION GEOMETRY OF A SMALL-SCALE CHROMOSPHERIC JET EVENT WITH THE NEW SOLAR TELESCOPE

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Zhicheng; Chen, Bin; Goode, Philip R.; Cao, Wenda [Center for Solar-Terrestrial Research, New Jersey Institute of Technology, 323 Martin Luther King Boulevard, Newark, NJ 07102 (United States); Ji, Haisheng [Big Bear Solar Observatory, 40386 North Shore Lane, Big Bear City, CA 92314 (United States)

    2016-03-01

    Jets are ubiquitously present in both quiet and active regions on the Sun. They are widely believed to be driven by magnetic reconnection. A fan-spine structure has been frequently reported in some coronal jets and flares, and has been regarded as a signature of ongoing magnetic reconnection in a topology consisting of a magnetic null connected by a fan-like separatrix surface and a spine. However, for small-scale chromospheric jets, clear evidence of such structures is rather rare, although it has been implied in earlier works that showed an inverted-Y-shaped feature. Here we report high-resolution (0.″16) observations of a small-scale chromospheric jet obtained by the New Solar Telescope (NST) using 10830 Å filtergrams. Bi-directional flows were observed across the separatrix regions in the 10830 Å images, suggesting that the jet was produced due to magnetic reconnection. At the base of the jet, a fan-spine structure was clearly resolved by the NST, including the spine and the fan-like surface, as well as the loops before and after the reconnection. A major part of this fan-spine structure, with the exception of its bright footpoints and part of the base arc, was invisible in the extreme ultraviolet and soft X-ray images (observed by the Atmosphere Imaging Assembly and the X-Ray Telescope, respectively), indicating that the reconnection occurred in the upper chromosphere. Our observations suggest that the evolution of this chromospheric jet is consistent with a two-step reconnection scenario proposed by Török et al.

  11. From Single Pixels to Many Megapixels: Progress in Astronomical Infrared Imaging from Space-borne Telescopes

    Science.gov (United States)

    Pipher, Judith

    2017-01-01

    In the 1960s, rocket infrared astronomy was in its infancy. The Cornell group planned a succession of rocket launches of a small cryogenically cooled telescope above much of the atmosphere. Cornell graduate students were tasked with hand-making single pixel detectors for the focal plane at wavelengths ranging from ~5 microns to just short of 1 mm. “Images” could only be constructed from scans of objects such as HII regions/giant molecular clouds, the galactic center, and of diffuse radiation from the various IR backgrounds. IRAS and COBE, followed by the KAO utilized ever more sensitive single IR detectors, and revolutionized our understanding of the Universe. The first IR arrays came onto the scene in the early 1970s - and in 1983 several experiments for the space mission SIRTF (later named Spitzer Space Telescope following launch 20 years later) were selected, all boasting (relatively small) arrays. Europe’s ISO and Herschel also employed arrays to good advantage, as has SOFIA, and now, many-megapixel IR arrays are sufficiently well-developed for upcoming space missions.

  12. A New Method for Wide-Field Near-IR Imaging with the Hubble Space Telescope

    CERN Document Server

    Momcheva, Ivelina G; van der Wel, Arjen; Brammer, Gabriel B; Mackenty, John; Nelson, Erica J; Leja, Joel; Muzzin, Adam; Franx, Marijn

    2016-01-01

    We present a new technique for wide and shallow observations using the near-infrared channel of Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST). Wide-field near-IR surveys with HST are generally inefficient, as guide star acquisitions make it impractical to observe more than one pointing per orbit. This limitation can be circumvented by guiding with gyros alone, which is possible as long as the telescope has three functional gyros. The method presented here allows us to observe mosaics of eight independent WFC3-IR pointings in a single orbit by utilizing the fact that HST drifts by only a very small amount in the 25 seconds between non-destructive reads of unguided exposures. By shifting the reads and treating them as independent exposures the full resolution of WFC3 can be restored. We use this "drift and shift" (DASH) method in the Cycle 23 COSMOS-DASH program, which will obtain 456 WFC3 $H_{160}$ pointings in 57 orbits, covering an area of 0.6 degree$^2$ in the COSMOS field down to $H_{160} ...

  13. Imaging the supermassive black hole shadow and jet base of M87 with the event horizon telescope

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Ru-Sen; Fish, Vincent L.; Doeleman, Sheperd S.; Pankratius, Victor [Massachusetts Institute of Technology, Haystack Observatory, Route 40, Westford, MA 01886 (United States); Broderick, Avery E. [Perimeter Institute for Theoretical Physics, 31 Caroline Street North, Waterloo, ON N2L 2Y5 (Canada); Baron, Fabien [Department of Physics and Astronomy, Georgia State University, 25 Park Place NE, Atlanta, GA 30303 (United States); Monnier, John D., E-mail: rslu@haystack.mit.edu [Department of Astronomy, University of Michigan, 918 Dennison Building, Ann Arbor, MI 48109-1090 (United States)

    2014-06-20

    The Event Horizon Telescope (EHT) is a project to assemble a Very Long Baseline Interferometry (VLBI) network of millimeter wavelength dishes that can resolve strong field general relativistic signatures near a supermassive black hole. As planned, the EHT will include enough dishes to enable imaging of the predicted black hole 'shadow', a feature caused by severe light bending at the black hole boundary. The center of M87, a giant elliptical galaxy, presents one of the most interesting EHT targets as it exhibits a relativistic jet, offering the additional possibility of studying jet genesis on Schwarzschild radius scales. Fully relativistic models of the M87 jet that fit all existing observational constraints now allow horizon-scale images to be generated. We perform realistic VLBI simulations of M87 model images to examine the detectability of the black shadow with the EHT, focusing on a sequence of model images with a changing jet mass load radius. When the jet is launched close to the black hole, the shadow is clearly visible both at 230 and 345 GHz. The EHT array with a resolution of 20-30 μas resolution (∼2-4 Schwarzschild radii) is able to image this feature independent of any theoretical models and we show that imaging methods used to process data from optical interferometers are applicable and effective for EHT data sets. We demonstrate that the EHT is also capable of tracing real-time structural changes on a few Schwarzschild radii scales, such as those implicated by very high-energy flaring activity of M87. While inclusion of ALMA in the EHT is critical for shadow imaging, the array is generally robust against loss of a station.

  14. Imaging the Supermassive Black Hole Shadow and Jet Base of M87 with the Event Horizon Telescope

    CERN Document Server

    Lu, Ru-Sen; Monnier, John D; Fish, Vincent L; Doeleman, Sheperd S; Pankratius, Victor

    2014-01-01

    The Event Horizon Telescope (EHT) is a project to assemble a Very Long Baseline Interferometry (VLBI) network of mm wavelength dishes that can resolve strong field General Relativistic signatures near a supermassive black hole. As planned, the EHT will include enough dishes to enable imaging of the predicted black hole "shadow", a feature caused by severe light bending at the black hole boundary. The center of M87, a giant elliptical galaxy, presents one of the most interesting EHT targets as it exhibits a relativistic jet, offering the additional possibility of studying jet genesis on Schwarzschild radius scales. Fully relativistic models of the M87 jet that fit all existing observational constraints now allow horizon-scale images to be generated. We perform realistic VLBI simulations of M87 model images to examine detectability of the black shadow with the EHT, focusing on a sequence of model images with a changing jet mass load radius. When the jet is launched close to the black hole, the shadow is clearly...

  15. Space Telescope.

    Science.gov (United States)

    National Aeronautics and Space Administration, Huntsville, AL. George C. Marshall Space Flight Center.

    This pamphlet describes the Space Telescope, an unmanned multi-purpose telescope observatory planned for launch into orbit by the Space Shuttle in the 1980s. The unique capabilities of this telescope are detailed, the major elements of the telescope are described, and its proposed mission operations are outlined. (CS)

  16. First data from IceAct, an imaging air Cherenkov telescope with SiPMs at the South Pole

    Energy Technology Data Exchange (ETDEWEB)

    Auffenberg, Jan; Bretz, Thomas; Hansmann, Bengt; Hansmann, Tim; Hebbeker, Thomas; Kemp, Julian; Middendorf, Lukas; Niggemann, Tim; Raedel, Leif; Schaufel, Merlin; Schumacher, Johannes; Stahlberg, Martin; Werhan, Ansgar; Wiebusch, Christopher [RWTH Aachen University (Germany)

    2016-07-01

    IceCube-Gen2 is planned to extend the IceCube Neutrino Observatory at the geographic South Pole. For neutrino astronomy, a large background-free sample of well-reconstructed astrophysical neutrinos is essential. The main background for this signal are muons and neutrinos which are produced in cosmic-ray air showers in the Earth's atmosphere. The coincident detection of these air showers by the surface detector IceTop has been proven to be a powerful veto for atmospheric neutrinos and muons in the field of view of the Southern Hemisphere. This motivates a large extension of IceTop to more efficiently detect cosmic rays, IceVeto. Part of these extension plans is an array of imaging air Cherenkov telescopes, IceAct. A first IceAct prototype is consisting of an SiPM camera and lens optics optimized for harsh environments. Compared to IceTop stations, these telescopes potentially lower the detection threshold for air showers at the cost of a lower duty cycle. We present first data, taken during the commissioning of an IceAct prototype in December 2015 at the South Pole.

  17. The FACT camera project, a novel camera type for very high energy (VHE) gamma astronomy with imaging air Cherenkov telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Neise, Dominik [TU, Dortmund (Germany)

    2010-07-01

    Recent progress in the field of photon detectors allows the development of novel camera types for VHE gamma astronomy with Imaging Air Cherenkov Telescopes. We are currently constructing a first full size camera, dubbed FACT (first avalanche-photodiode camera test) based on the novel Geiger-mode avalanche photodiodes (G-APD). These semiconductor photon detectors show several advanced features compared to conventional photomultiplier tubes, such as a significantly higher photon detection efficiency (PDE), high compactness, insensitivity against magnetic fields etc. In addition an entirely embedded new type of data acquisition as well as trigger system based on the novel domino ring sampling chip (DRS4) is being developed. The camera will be integral part of the new DWARF telescope located on the Canary island La Palma using the renovated HEGRA CT3 mount. DWARF is dedicated for long-term monitoring and observations of bright active galactic nuclei. A report about the successful prototype runs as well as about the concept and current status of the camera development is given.

  18. A Real-Time, GPU-Based, Non-Imaging Back-End for Radio Telescopes

    CERN Document Server

    Magro, Alessio

    2014-01-01

    Since the discovery of RRATs, interest in single pulse radio searches has increased dramatically. Due to the large data volumes generated by these searches, especially in planned surveys for future radio telescopes, such searches have to be conducted in real-time. This has led to the development of a multitude of search techniques and real-time pipeline prototypes. In this work we investigated the applicability of GPUs. We have designed and implemented a scalable, flexibile, GPU-based, transient search pipeline composed of several processing stages, including RFI mitigation, dedispersion, event detection and classification, as well as data quantisation and persistence. These stages are encapsulated as a standalone framework. The optimised GPU implementation of direct dedispersion achieves a speedup of more than an order of magnitude when compared to an optimised CPU implementation. We use a density-based clustering algorithm, coupled with a candidate selection mechanism to group detections caused by the same ...

  19. The First VERITAS Telescope

    CERN Document Server

    Holder, J; Badran, H M; Blaylock, G; Bradbury, S M; Buckley, J H; Byrum, K L; Carter-Lewis, D A; Celik, O; Chow, Y C K; Cogan, P; Cui, W; Daniel, M K; De la Calle-Perez, I; Dowdall, C; Dowkontt, P; Duke, C; Falcone, A D; Fegan, S J; Finley, J P; Fortin, P; Fortson, L F; Gibbs, K; Gillanders, G; Glidewell, O J; Grube, J; Gutíerrez, K J; Gyuk, G; Hall, J; Hanna, D; Hays, E; Horan, D; Hughes, S B; Humensky, T B; Imran, A; Jung, I; Kaaret, Philip; Kenny, G E; Kieda, D; Kildea, J; Knapp, J; Krawczynski, H; Krennrich, F; Lang, M J; Le Bohec, S; Linton, E; Little, E K; Maier, G; Manseri, H; Milovanovic, A; Moriarty, P; Mukherjee, R; Ogden, P A; Ong, R A; Perkins, J S; Pizlo, F; Pohl, M; Quinn, J; Ragan, K; Reynolds, P T; Roache, E T; Rose, H J; Schroedter, M; Sembroski, G H; Sleege, G A; Steele, D; Swordy, S P; Syson, A; Toner, J A; Valcarcel, L; Vasilev, V V; Wagner, R; Wakely, S P; Weekes, T C; White, R J; Williams, D A

    2006-01-01

    The first atmospheric Cherenkov telescope of VERITAS (the Very Energetic Radiation Imaging Telescope Array System) has been in operation since February 2005. We present here a technical description of the instrument and a summary of its performance. The calibration methods are described, along with the results of Monte Carlo simulations of the telescope and comparisons between real and simulated data. The analysis of TeV $\\gamma$-ray observations of the Crab Nebula, including the reconstructed energy spectrum, is shown to give results consistent with earlier measurements. The telescope is operating as expected and has met or exceeded all design specifications.

  20. The Greenwich Photo-heliographic Results (1874 - 1885): Observing Telescopes, Photographic Processes, and Solar Images

    Science.gov (United States)

    Willis, D. M.; Wild, M. N.; Appleby, G. M.; Macdonald, L. T.

    2016-11-01

    Potential sources of inhomogeneity in the sunspot measurements published by the Royal Observatory, Greenwich, during the early interval 1874 - 1885 are examined critically. Particular attention is paid to inhomogeneities that might arise because the sunspot measurements were derived from solar photographs taken at various contributing solar observatories, which used different telescopes, experienced different seeing conditions, and employed different photographic processes. The procedures employed in the Solar Department at the Royal Greenwich Observatory (RGO), Herstmonceux, during the final phase of sunspot observations provide a modern benchmark for interpreting the early sunspot measurements. The different observing telescopes used at the contributing solar observatories during the interval 1874 - 1885 are discussed in detail, using information gleaned from the official RGO publications and other relevant historical documents. Likewise, the different photographic processes employed at the different solar observatories are reviewed carefully. The procedures used by RGO staff to measure the positions and areas of sunspot groups on photographs of the Sun having a nominal radius of either four or eight inches are described. It is argued that the learning curve for the use of the Kew photoheliograph at the Royal Observatory, Greenwich, actually commenced in 1858, not 1874. The RGO daily number of sunspot groups is plotted graphically and analysed statistically. Similarly, the changes of metadata at each solar observatory are shown on the graphical plots and analysed statistically. It is concluded that neither the interleaving of data from the different solar observatories nor the changes in metadata invalidates the RGO count of the number of sunspot groups, which behaves as a quasi-homogeneous time series. Furthermore, it is emphasised that the correct treatment of days without photographs is quite crucial to the correct calculation of Group Sunspot Numbers.