WorldWideScience

Sample records for extraction sockets treated

  1. Evaluation of osteoblastic activity in extraction sockets treated with platelet-rich fibrin.

    Science.gov (United States)

    Baslarli, Ozgur; Tumer, Celal; Ugur, Omer; Vatankulu, Betul

    2015-01-01

    The aim of this study was to determine whether the use of platelet rich fibrin (PRF) improved the healing of extraction sockets. A total of 20 patients with bilateral soft tissue impacted mandibular third molars were included in this study. The left and right third molars were extracted during the same session. Subsequently, the PRF membrane was randomly administered to one of the extraction sockets, whereas the contralateral sockets were left without treatment. On postoperative 30. and 90. days, panoramic images and bone scintigrams were taken to evaluate the bone healing between PRF-treated and non-PRF-treated sockets. Also, periodontal evaluation was performed in the same control sessions. Dependent group t test for paired samples was used for statistical analysis. The average increase in technetium-99m methylene diphosphonate uptake as an indication of enhanced bone healing did not differ significantly between PRF-treated and non-PRF-treated sockets 30 and 90 days postoperatively. Radio-opacity that can show the bone healing on panoramic images were measured by Image J programme and they did not differ significantly. Also periodontal values did not differ significantly. PRF might not lead to enhanced bone healing in impacted mandibular third molar extraction sockets 30 and 90 days after surgery. It is thought that PRF has the potential characteristics of an autologous fibrin matrix and can accelerate the healing. To better understand the effects of PRF on healing, further research is warranted with larger sample sizes.

  2. Scintigraphic evaluation of osteoblastic activity in extraction sockets treated with platelet-rich fibrin.

    Science.gov (United States)

    Gürbüzer, Bahadir; Pikdöken, Levent; Tunali, Mustafa; Urhan, Muammer; Küçükodaci, Zafer; Ercan, Feriha

    2010-05-01

    To evaluate the effect of platelet-rich fibrin (PRF) on the early bone healing process with bone scintigraphy based on technetium-99m methylene diphosphonate uptake in third molar extraction sockets. Fourteen patients with bilaterally soft tissue impacted third mandibular molars were included in the study. The right and left impacted third molars were surgically extracted in the same session. PRF was randomly administered into one of the extraction sockets, whereas the contralateral sockets were left without treatment. Four weeks after surgery, scintigrams were obtained to evaluate scintigraphic differences between PRF-treated and non-PRF-treated sockets. After completion of the clinical study, PRF samples were evaluated by light and scanning electron microscopy. The average increase in technetium-99m methylene diphosphonate uptake as an indication of enhanced bone healing did not differ significantly between PRF-treated and non-PRF-treated sockets 4 weeks postoperatively (P > .05). Abundant fibrin and inflammatory cells were observed by light microscopic examination of PRF samples. Scanning electron microscopic analysis of PRF revealed the existence of platelet aggregates in a fibrin network and crystalline particles on the outer surface of PRF. PRF might not lead to enhanced bone healing in soft tissue impacted mandibular third molar extraction sockets 4 weeks after surgery. PRF exhibits the potential characteristics of an autologous fibrin matrix. However, whether the presence of crystal-like particles on the outer surface of PRF alters bone healing should be investigated further. Copyright 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  3. Histometric study of socket healing after tooth extraction in rats treated with diclofenac

    Directory of Open Access Journals (Sweden)

    Yugoshi Luciana Ibara

    2002-01-01

    Full Text Available The purpose of the present study was to investigate if diclofenac administration interferes with the time course of alveolar wound healing in rats. Forty-two Wistar rats were used, 21 rats received 10 mg/kg/day of diclofenac one day before and 4 days after extraction of the right maxillary incisors and 21 rats received saline. The animals were sacrificed 7, 14 and 21 days after tooth extraction. Progressive new bone formation and a decrease in the volume fraction of blood clot and connective tissue from 1 to 3 weeks after tooth extraction was quantified using the histometric point-counting method. Diclofenac treatment caused a significant delay in new bone formation in association with an impairment of blood clot remission/organization.

  4. Histologic and Radiographic Analysis of Nonhealing Extraction Sockets Treated with Bio-Oss Collagen After a 4-Month Healing Period: A Prospective Descriptive Study in Humans.

    Science.gov (United States)

    Tirone, Federico; Salzano, Stefano; Pagano, Marco

    2018-03-07

    Healing of extraction sockets may sometimes result in formation of fibrous tissue instead of bone, even after 4 months, an occurrence that may hinder implant placement. The aim of this preliminary observational study was to histologically evaluate quality and amount of bone regeneration after treating nonhealing sockets with a bovine-derived xenograft enriched with porcine collagen (Bio-Oss Collagen, Geistlich) without barrier membranes. Biopsy specimens were collected during implant placement, 4 months after grafting. A total of 10 cases were treated and evaluated. In all cases, correct implant placement was possible and no implant failure occurred up to 6 months after loading. The histologic analysis demonstrated new bone formation in all specimens. The percentage of newly formed bone was 29.1% (SD 20.71%; range 5% to 48%). Xenograft particles in direct contact with newly formed bone were visible, and mature lamellar bone was observed in 8 cases.

  5. Effect of Nd:YAG laser light on post-extractive socket healing in rats treated with zoledronic acid and dexamethasone

    Science.gov (United States)

    Mergoni, Giovanni; Merigo, Elisabetta; Passerini, Pietro; Corradi, Domenico; Maestri, Roberta; Bussolati, Ovidio; Bianchi, Massimiliano; Sala, Roberto; Govoni, Paolo; Namour, Samir; Vescovi, Paolo

    2016-03-01

    Introduction The effect of low level laser therapy (LLLT) on the healing process could be useful for the prevention of post-extractive Bisphosphonate-related Osteonecrosis of the Jaws (BRONJ). The aim of the study was to investigate the effect of LLLT on the post-extractive socket healing in rats treated with zoledronic acid and dexamethasone. Material and Methods Thirty male Sprague-Dawley rats were divided in 4 groups: control group (C, n = 5), laser group (L, n = 5), treatment group (T, n = 10) and treatment plus laser group (T+L, n = 10). Rats of group T and T+L received zoledronate 0,1 mg/Kg and dexamethasone 1 mg/Kg every 2 days for 10 weeks. Rats of group C and L were infused with vehicle. After 9 weeks the first maxillary molars were extracted in all rats. Rats of groups L and T+L received laser therapy (Nd:YAG, 1064 nm, 1.25W, 15Hz, 5 min, 14.37 J/cm2) in the socket area at days 0, 2, 4 and 6 after surgery. At 8 days from extraction, the sockets were clinically assessed with a grading score and the wound area was measured with a dedicate software. Histomorphometric evaluation and western blot analysis of osteopontin and osteocalcin expression were performed. Results Group T+L showed a trend toward a better clinical grading score compared to group T (grade I 22% Vs 28 % - grade II 56% Vs 28% - grade III 22% Vs 44%, respectively). The average wound area was similar among the groups. Inhibition of osteoclastic alveolar bone resorption was found in groups T and T+L (Phealing in conditions at risk for MRONJ development.

  6. Single-Rooted Extraction Sockets: Classification and Treatment Protocol.

    Science.gov (United States)

    El Chaar, Edgar; Oshman, Sarah; Fallah Abed, Pooria

    2016-09-01

    Clinicians have many treatment techniques from which to choose when extracting a failing tooth and replacing it with an implant-supported restoration and when successful management of an extraction socket during the course of tooth replacement is necessary to achieve predictable and esthetic outcomes. This article presents a straightforward, yet thorough, classification for extraction sockets of single-rooted teeth and provides guidance to clinicians in the selection of appropriate and predictable treatment. The presented classification of extraction sockets for single-rooted teeth focuses on the topography of the extraction socket, while the protocol for treatment of each socket type factors in the shape of the remaining bone, the biotype, and the location of the socket whether it be in the mandible or maxilla. This system is based on the biologic foundations of wound healing and can help guide clinicians to successful treatment outcomes.

  7. Effects of lithium on extraction socket healing in rats assessed with micro-computed tomography.

    Science.gov (United States)

    Zeng, Yun Ting; Fu, Bin; Tang, Guo Hua; Zhang, Lei; Qian, Yu Fen

    2013-09-01

    Lithium is an activator of β-catenin signaling and β-catenin plays an important role in regulating bone formation and remodeling. The purpose of this study was to investigate the effects of lithium on bone repair in tooth extraction sockets in rats. Twenty male Wistar rats were subjected to maxillary left second molar extraction. The animals received a daily injection of lithium chloride (LiCl) or the same dose of sodium chloride (NaCl) starting 7 days before tooth extraction until sacrifice 14 days after extraction. Rats were randomly divided into: (1) a pre-treated group that received LiCl injection from 7 days before to 3 days after tooth extraction; (2) a post-treated group that received LiCl injection starting 4 days after tooth extraction; (3) a continuously treated group that received LiCl injection for the entire 21 days; and (4) a control group that received NaCl injection only. The volume of new bone and the bone density in the extraction socket were quantified by micro-computed tomography. The percentage of new bone formation in the extraction socket was as follows: 63.2 ± 13.4% (pre-treated group), 53.9 ± 9.8% (post-treated), 23.8 ± 8.0% (continuously treated) and 37.5 ± 4.2% (control). The difference in percentage was statistically significant between each pair of groups. Pre- and post-treated groups also showed a significant increase in the density of new bone. Lithium enhances bone repair in extraction sockets when delivered before or after tooth extraction. Tooth extraction during lithium treatment may impair bone healing.

  8. [Use of "gelatamp" colloidal silver gelatin sponge to prevent dry socket after extracting mandibular impacted teeth].

    Science.gov (United States)

    Wang, Yao-zhong; Guan, Qun-li; Li, Ya-xin; Guo, Ji-lai; Jiang, Ling; Jia, Mu-yun; Deng, Yue

    2013-02-01

    To study the clinical effect of "gelatamp" colloidal silver gelatin sponge on preventing dry socket after extracting the mandibular impacted teeth. 1350 teeth extracted from 976 patients who needed to extract the mandibular impacted teeth were divided into group A, group B and group C randomly. "Gelatamp" colloidal silver gelatin sponge was implanted into alveolar socket after teeth extraction in group A, with absorbable gelatin sponge was implanted into alveolar socket in group B and nothing was implanted into alveolar socket in group C. The incidence of dry socket was observed, the data was analyzed using SPSS10.0 software package. The incidence of dry socket was 0.44% in group A, 2% in group B and 4.44% in group C. There was significant difference in the incidence of dry socket between group A and group C(Pcolloidal silver gelatin sponge can prevent the occurrence of dry socket after teeth extraction, which is of wide clinical use.

  9. Autotransplantation of third molars with completely formed roots into surgically created sockets and fresh extraction sockets: a 10-year comparative study.

    Science.gov (United States)

    Yu, H J; Jia, P; Lv, Z; Qiu, L X

    2017-04-01

    The aim of this study was to analyze and compare the long-term clinical outcomes of mature third molar autotransplantation in surgically created sockets and fresh extraction sockets with regard to survival and functional success rates. A total of 65 third molars with completely formed roots were autotransplanted in 60 patients (average age 33.1 years). Thirty-six of the teeth were autotransplanted into surgically created sockets with or without guided bone regeneration (GBR; delayed autotransplantation), while 29 were autotransplanted into fresh extraction sockets (immediate autotransplantation; control group). All patients underwent annual clinical and radiographic examinations (average follow-up 9.9 years, range 7-13 years). The survival rates for the control, GBR, and no GBR groups were 93.1%, 95.2%, and 80.0%, respectively, with no significant differences among the groups. There were no statistically significant differences among the groups with regard to the frequency of inflammatory root resorption or root ankylosis. Age did not influence the clinical outcomes. These results suggest that the autotransplantation of third molars with completely formed roots is effective in both surgically created and fresh extraction sockets and provides a high long-term success rate if cases are selected and treated appropriately. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  10. Impact of different synthetic bone fillers on healing of extraction sockets: an experimental study in dogs.

    Science.gov (United States)

    Hong, Ji-Youn; Lee, Jung-Seok; Pang, Eun-Kyoung; Jung, Ui-Won; Choi, Seong-Ho; Kim, Chong-Kwan

    2014-02-01

    The objective of this study was to elucidate the socket healing process and biodegradation of incorporating synthetic bone fillers followed by grafting of the fresh extraction socket. Third premolars in four quadrants of eight beagle dogs were extracted and randomly treated with either one of hydroxyapatite (HA), biphasic calcium phosphate (BCP), β-tricalcium phosphate (β-TCP), or no graft (C). Histologic observations and histomorphometric analysis at three zones (apical, middle, and coronal) of the socket were performed. Socket area (S) and the proportions of newly formed bone (%NB), residual biomaterials (%RB), and fibrovascular connective tissue (%FCT) at 2, 4, and 8 weeks were measured. The numbers of osteoclast-like multinucleated cells (No.OC) were also determined at the three zones. %NB was significantly higher in control group compared with the grafted groups at all healing periods. %NB of HA and BCP increased with time, whereas %RB showed different patterns that decreased in BCP, unlike the minimal change observed in HA. %NB of β-TCP showed smallest portion compared with other grafted groups at 2 and 4 weeks, however, significantly increased at 8 weeks. %RB of β-TCP was less than HA and BCP at all healing periods. Numbers of multinucleated cells were greater in BCP and β-TCP, followed by HA and smallest in control group. Within the limit of this study, bone formation of the extraction socket was delayed in the sockets grafted with synthetic bone fillers and showed different healing process according to the biodegradation patterns. © 2012 John Wiley & Sons A/S.

  11. Treatment of an Erratic Extraction Socket for Implant Therapy in a Patient with Chronic Periodontitis

    Science.gov (United States)

    Prabhu, Srividya

    2016-01-01

    As implant therapy becomes more commonplace in daily practice, preservation and preparation of edentulous sites are key. Many times, however, implant therapy may not be considered at the time of tooth extraction and additional measures are not taken to conserve the edentulous site. While the healing process in extraction sockets has been well investigated and bone fill can be expected, there are cases where even when clinicians perform thorough debridement of the sockets, connective tissue infiltration into the socket can occur. This phenomenon, known as “erratic healing,” may be associated with factors that lead to peri-implant disease and should be appropriately managed and treated prior to surgical implant placement. This case report describes the successful management of an erratic healing extraction socket in a 62-year-old Caucasian male patient with chronic periodontitis and the outcomes of an evidence-based treatment protocol performed prior to implant therapy. Careful preoperative analysis and cone beam computed tomography imaging can help detect signs of impaired healing in future implant sites and prevent surgical complications. PMID:27807485

  12. Treatment of an Erratic Extraction Socket for Implant Therapy in a Patient with Chronic Periodontitis

    Directory of Open Access Journals (Sweden)

    Yusuke Hamada

    2016-01-01

    Full Text Available As implant therapy becomes more commonplace in daily practice, preservation and preparation of edentulous sites are key. Many times, however, implant therapy may not be considered at the time of tooth extraction and additional measures are not taken to conserve the edentulous site. While the healing process in extraction sockets has been well investigated and bone fill can be expected, there are cases where even when clinicians perform thorough debridement of the sockets, connective tissue infiltration into the socket can occur. This phenomenon, known as “erratic healing,” may be associated with factors that lead to peri-implant disease and should be appropriately managed and treated prior to surgical implant placement. This case report describes the successful management of an erratic healing extraction socket in a 62-year-old Caucasian male patient with chronic periodontitis and the outcomes of an evidence-based treatment protocol performed prior to implant therapy. Careful preoperative analysis and cone beam computed tomography imaging can help detect signs of impaired healing in future implant sites and prevent surgical complications.

  13. Treatment of an Erratic Extraction Socket for Implant Therapy in a Patient with Chronic Periodontitis.

    Science.gov (United States)

    Hamada, Yusuke; Prabhu, Srividya; John, Vanchit

    2016-01-01

    As implant therapy becomes more commonplace in daily practice, preservation and preparation of edentulous sites are key. Many times, however, implant therapy may not be considered at the time of tooth extraction and additional measures are not taken to conserve the edentulous site. While the healing process in extraction sockets has been well investigated and bone fill can be expected, there are cases where even when clinicians perform thorough debridement of the sockets, connective tissue infiltration into the socket can occur. This phenomenon, known as "erratic healing," may be associated with factors that lead to peri-implant disease and should be appropriately managed and treated prior to surgical implant placement. This case report describes the successful management of an erratic healing extraction socket in a 62-year-old Caucasian male patient with chronic periodontitis and the outcomes of an evidence-based treatment protocol performed prior to implant therapy. Careful preoperative analysis and cone beam computed tomography imaging can help detect signs of impaired healing in future implant sites and prevent surgical complications.

  14. Healing of ungrafted and grafted extraction sockets after 12 weeks: a prospective clinical study.

    Science.gov (United States)

    Heberer, Susanne; Al-Chawaf, Bassem; Jablonski, Carlo; Nelson, John J; Lage, Hermann; Nelson, Katje

    2011-01-01

    In this prospective study, bone formation in human extraction sockets augmented with Bio-Oss Collagen after a 12-week healing period was quantified and compared to bone formation in unaugmented extraction sockets. Selected patients with four-walled extraction sockets were included in this prospective study. After extraction, the sockets were randomly augmented using Bio-Oss Collagen or left to heal unfilled without raising a mucoperiosteal flap. At the time of implant placement, histologic specimens were obtained from the socket and analyzed. Statistical analysis was performed using the Wilcoxon signed-rank test. Twenty-five patients with a total of 39 sockets (20 augmented, 19 unaugmented) were included in the study and the histologic specimens analyzed. All specimens were free of inflammatory cells. The mean overall new bone formation in the augmented sites was 25% (range, 8%-41%) and in the unaugmented sockets it was 44% (range, 3%-79%). There was a significant difference in the rate of new bone formation between the grafted and ungrafted sockets and a significant difference in the bone formation rate in the apical compared to the coronal regions of all sockets, independent of the healing mode. This descriptive study demonstrated that bone formation in Bio-Oss Collagen-grafted human extraction sockets was lower than bone formation in ungrafted sockets. Bone formation occurred in all specimens with varying degrees of maturation independent of the grafting material and was initiated from the apical region.

  15. Immediate Implant Placement into Extraction Sockets with Labial Plate Dehiscence Defects: A Clinical Case Series.

    Science.gov (United States)

    Sarnachiaro, Guido O; Chu, Stephen J; Sarnachiaro, Evangelina; Gotta, Sergio Luis; Tarnow, Dennis P

    2016-08-01

    To measure the buccal plate reconstruction of extraction sockets with labial plate dehiscence defects using a bone allograft in combination with an absorbable collagen membrane and a custom-healing abutment at the time of tooth removal. Ten patients underwent immediate implant placement and reconstruction of the buccal plate. Cone beam computed tomography (CBCT) was performed preextraction, immediately after bone grafting and implant placement (day 0), and between 6 and 9 months following implant surgery. Measurements were taken at three levels: coronal (L1), middle (L2), and apical (L3) level. Implants placed into sockets with labial plate dehiscence defects demonstrated radiographic reformation of the labial plate dehiscence defect at 6 to 9 months posttreatment. The net gain in labial plate on cone beam computerized tomography (CBCT) in L1 and L2 was 3.0 mm, where 0 mm existed at pretreatment. The minimum amount of labial plate thickness of 2.0 mm was achieved in all treated sites, evaluated radiographically at 6 to 9 months postoperatively, in a single procedure, without flap elevation and maintaining the gingival architecture and satisfactory esthetics. Placing an absorbable membrane, bone graft, and custom-healing abutment at the time of flapless anterior tooth extraction and immediate implant placement into a socket with a labial osseous dehiscence is a viable clinical technique to reconstitute the absence of the labial bone plate. © 2015 Wiley Periodicals, Inc.

  16. Impacted third molar transplantation on the malpracticed extraction socket.

    Science.gov (United States)

    Kim, Soung Min; Amponsah, Emmanuel K

    2017-12-01

    Autotransplantation with or without endodontic therapy is regarded as an alternative treatment option for the replacement of missing teeth. A primary responsibility of a maxillofacial surgeon is to reverse any malpractice to promote successful outcomes and improve the patient's quality of life. This paper presents a malpractice case of incorrect extraction of the lower second molar instead of the impacted third molar. A simple technique of transplanting the impacted third molar to the site of the extracted second molar is introduced by a maxillofacial specialist in Ghana. By making an intentional root socket and fixation without using additional appliances, a novel second molar was achieved with complete recovery. This patient was followed after transplant for a four-year period with the best satisfaction. A grant of the Korean Health Technology R&D Project, Ministry of Health & Welfare, Republic of Korea. (HI15C0689).

  17. Immediate placement of endosseous implants into the extraction sockets

    Directory of Open Access Journals (Sweden)

    Vijay Ebenezer

    2015-01-01

    Full Text Available Implant by definition "means any object or material, such as an alloplastic substance or other tissue, which is partial or completely inserted into the body for therapeutic, diagnostic, prosthetic, or experimental purpose." The placement of a dental implant in an extraction socket at the time of extraction or explantation is known as immediate implant placement whereas delayed placement of implant signifies the implant placement in edentulous areas where healing has completed with new bone formation after the loss of tooth/teeth. Recent idea goes by "why late when it can be done immediately." There are several advantages of immediate placement of implants, and lots of studies have been done. In this article, the advantages and disadvantages of immediate versus delayed placement of implants have been reviewed.

  18. Immediate placement of endosseous implants into the extraction sockets.

    Science.gov (United States)

    Ebenezer, Vijay; Balakrishnan, K; Asir, R Vigil Dev; Sragunar, Banu

    2015-04-01

    Implant by definition "means any object or material, such as an alloplastic substance or other tissue, which is partial or completely inserted into the body for therapeutic, diagnostic, prosthetic, or experimental purpose." The placement of a dental implant in an extraction socket at the time of extraction or explantation is known as immediate implant placement whereas delayed placement of implant signifies the implant placement in edentulous areas where healing has completed with new bone formation after the loss of tooth/teeth. Recent idea goes by "why late when it can be done immediately." There are several advantages of immediate placement of implants, and lots of studies have been done. In this article, the advantages and disadvantages of immediate versus delayed placement of implants have been reviewed.

  19. Immediate provisionalization of dental implants placed in healed alveolar ridges and extraction sockets: a 5-year prospective evaluation.

    Science.gov (United States)

    Cooper, Lyndon F; Reside, Glenn J; Raes, Filiep; Garriga, Joan Soliva; Tarrida, Luis Giner; Wiltfang, Jörg; Kern, Matthias; De Bruyn, Hugo

    2014-01-01

    This 5-year prospective multicenter study compared implant survival and success, peri-implant health and soft tissue responses, crestal bone level stability, and complication rates following immediate loading of single OsseoSpeed implants placed in anterior maxillary healed ridges or extraction sockets. Individuals requiring anterior tooth replacement with single implants were treated and immediately provisionalized. Definitive all-ceramic crowns were placed at 12 weeks. Implant survival, bone levels, soft tissue levels, and peri-implant health were monitored for 5 years. One hundred thirteen patients received implants in fresh sockets (55) and healed ridges (58). After 5 years, 45 and 49 patients remained for evaluation, respectively. During the first year, three implants failed in the extraction socket group (94.6% survival) and one implant failed in the healed ridge group (98.3% survival); this difference was not significant. No further implant failures were recorded. After 5 years, the interproximal crestal bone levels were located a mean of 0.43 ± 0.63 mm and 0.38 ± 0.62 mm from the reference points of implants in sockets and healed ridges (not a significant difference). In both groups, papillae increased over time and peri-implant mucosal zenith positions were stable from the time of definitive crown placement in sockets and healed ridges. Compared to flap surgery for implants in healed ridges, flapless surgery resulted in increased peri-implant mucosal tissue dimension (average, 0.78 ± 1.34 mm vs 0.19 ± 0.79 mm). After 5 years, the bone and soft tissue parameters that characterize implant success and contribute to dental implant esthetics were similar following the immediate provisionalization of implants in sockets and healed ridges. The overall tissue responses and reported implant survival support the immediate provisionalization of dental implants in situations involving healed ridges and, under ideal circumstances, extraction sockets.

  20. Survival Rate of Delayed Implants Placed in Healed Extraction Sockets is Significantly Higher Than That of Immediate Implants Placed in Fresh Extraction Sockets.

    Science.gov (United States)

    Antetomaso, Jordan; Kumar, Satish

    2018-03-01

    Immediate implant placement into fresh extraction sockets versus delayed implants into healed sockets: a systematic review and meta-analysis. Mello CC, Lemos CAA, Verri FR, Dos Santos DM, Goiato MC, Pellizzer EP. Int J Oral Maxillofac Surg 2017; 46(9):1162-77. None TYPE OF STUDY/DESIGN: Systematic review with meta-analysis of data. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Buccal bone deficiency in fresh extraction sockets: a prospective single cohort study.

    Science.gov (United States)

    Barone, Antonio; Ricci, Massimiliano; Romanos, Georgios E; Tonelli, Paolo; Alfonsi, Fortunato; Covani, Ugo

    2015-07-01

    The purpose of this prospective single cohort study was to evaluate the use of xenograft and collagen membranes in treating full or partial buccal bone defects of fresh extraction sockets in the esthetic zone. Thirty-three patients requiring tooth extraction in the anterior maxillary area and showing a complete or partial buccal bone plate deficiency (more than 2 mm) were consecutively enrolled and treated. Corticocancellous porcine bone and platelet-rich fibrin (PRF) with a collagen membrane were used to graft the extraction sockets, and the membranes were left exposed to the oral cavity with a secondary soft tissue healing. The outcome variables were as follows: width of keratinized mucosa, facial soft tissue levels, clinical bone changes (measured with a clinical splint), implant and prosthesis failures, and peri-implant marginal bone changes. All treated sites allowed the placement of implants; the width of keratinized mucosa at the mid-facial aspect showed an increase of 2.3 mm 5 months after the grafting procedure, and its value was 3.2 ± 0.6 mm at 1-year follow-up. The mean values of the facial soft tissue level indicated an increase over time. The bone level showed an improvement of 0.8 ± 0.1 mm and 0.7 ± 0.1 mm at mesial and distal sites, respectively, when compared to the baseline measurements. Finally, in the palatal area, no bone changes were observed. No implant failed during the entire observation period. Findings from this study showed that xenograft and PRF, used for ridge preservation of the extraction sockets with buccal bone plate dehiscence in the esthetic zone, can be considered effective in repairing bone defects before implant placement. The secondary soft tissue healing over the grafted sockets did not compromise bone formation; moreover, the soft tissue level and the width of keratinized gingiva showed a significant improvement over time. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. Immediate implant placement into fresh extraction sockets versus delayed implants into healed sockets: A systematic review and meta-analysis.

    Science.gov (United States)

    Mello, C C; Lemos, C A A; Verri, F R; Dos Santos, D M; Goiato, M C; Pellizzer, E P

    2017-09-01

    The aim of this systematic review and meta-analysis was to compare the survival rate of the implants and the peri-implant tissue changes associated with implants inserted in fresh extraction sockets and those inserted in healed sockets. This review has been registered at PROSPERO under the number CRD42016043309. A systematic search was conducted by two reviewers independently in the databases PubMed/MEDLINE, Embase, and the Cochrane Library using different search terms; articles published until November 2016 were searched for. The searches identified 30 eligible studies. A total of 3,049 implants were installed in a total of 1,435 patients with a mean age of 46.68 years and a minimum of 6 months of follow-up. The survival rate of delayed implants (98.38%) was significantly greater than immediate implants (95.21%) (p=.001). For the marginal bone loss (p=.32), implant stability quotients values (p=.44), and pocket probing depth (p=.94) there was no significant difference between the analysed groups. The immediate implants placed in fresh sockets should be performed with caution because of the significantly lower survival rates than delayed implants inserted in healed sockets. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  3. Parathyroid hormone related to bone regeneration in grafted and nongrafted tooth extraction sockets in rats.

    Science.gov (United States)

    Kuroshima, Shinichiro; Al-Salihi, Zeina; Yamashita, Junro

    2013-02-01

    The quality and quantity of bone formed in tooth extraction sockets impact implant therapy. Therefore, the establishment of a new approach to enhance bone formation and to minimize bone resorption is important for the success of implant therapy. In this study, we investigated whether intermittent parathyroid hormone (PTH) therapy enhanced bone formation in grafted sockets. Tooth extractions of the maxillary first molars were performed in rats, and the sockets were grafted with xenograft. Intermittent PTH was administered either for 7 days before extractions, for 14 days after extractions, or both. The effect of PTH therapy on bone formation in the grafted sockets was assessed using microcomputed tomography at 14 days after extractions. PTH therapy for 7 days before extractions was not effective to augment bone fill, whereas PTH therapy for 14 days after operation significantly augmented bone formation in the grafted sockets. Intermittent PTH therapy starting right after tooth extractions significantly enhanced bone fill in the grafted sockets, suggesting that PTH therapy can be a strong asset for the success of the ridge preservation procedure.

  4. Effect of Hypoxia-Inducible Factor 1α on Early Healing in Extraction Sockets

    Directory of Open Access Journals (Sweden)

    Hyun-Chang Lim

    2018-01-01

    Full Text Available The aim of the present study was to investigate the effect of hypoxia-inducible factor 1α (HIF1A on the early healing (4 weeks of extraction sockets exhibiting partial loss of the labial bone. Two extraction sockets of the maxillary incisors from each of six dogs were assigned to two treatment modalities: deproteinized bovine bone mineral (i with 10% collagen (DBBM-C soaked with HIF1A and covered by a collagen membrane (CM (HIF group or (ii treated with DBBM-C only and covered by a CM (control group. Microcomputed tomography revealed some degree of collapse of the labial contour. The totally augmented volume and new bone volume did not differ significantly between two groups (P>0.05. The histological analysis revealed that the apical area of the socket was mostly filled with newly formed bone, while there was less newly formed bone in the coronal area and incomplete cortex formation. The histomorphometric analysis revealed that the area of newly formed bone was significantly larger in the HIF group than the control group (12.16±3.04 versus 9.48±2.01 mm2, P<0.05, while there was no significant intergroup difference in the total augmented area. In conclusion, even though DBBM-C soaked with HIF1A enhanced histomorphometric bone formation, this intervention did not demonstrate superiority in preventing ridge shrinkage compared to DBBM-C alone. Clinical relevance of these findings should be further studied.

  5. The influence of alendronate on the healing of extraction sockets of ovariectomized rats assessed by in vivo micro-computed tomography.

    Science.gov (United States)

    Jee, Jeong-Hyun; Lee, Wan; Lee, Byung Do

    2010-08-01

    Many dental patients take bisphosphonates to reduce the risk of hip and vertebral fractures. In vivo micro-computed tomography (micro-CT) was used to examine the longitudinal inhibitory effect of alendronate on the healing of extraction sockets in ovariectomized rats. Twenty 5-week-old Sprague-Dawley rats were assigned randomly to 1 of 3 groups: sham-operated (n = 5), and 2 ovariectomized (OVX) groups: saline treated (0.1 mL/100 g/d, n = 7) and alendronate treated (1 mg/kg/d, n = 8). Before micro-CT scanning, the left maxillary first molars of the rats were extracted. In vivo micro-CT (spatial resolution 50 x 50 mum) of the jaw was performed at baseline and at 2-week intervals for 6 weeks. Alveolar-bone radiographic densities and dimensions were analyzed with repeated measures analysis of variance. The bony healing patterns of the extraction sockets were also evaluated in each group. The radiographic socket densities of the sham-treated and OVX-alendronate groups significantly increased during the first 4 weeks after extraction (P sockets in the OVX-saline group increased, but the increase was significantly lower than for the other groups at 4 weeks (P sockets in all groups 2 to 6 weeks after extraction. There was a significant loss of alveolar ridge height at the second week postextraction compared with baseline, and at the fourth week compared with the second week (P sockets in estrogen-deficient rats and helps resist the loss of alveolar bone adjacent to extraction sockets. Copyright 2010 Mosby, Inc. All rights reserved.

  6. Immediate Implant Placement in Single-Tooth Molar Extraction Sockets: A 1- to 6-Year Retrospective Clinical Study.

    Science.gov (United States)

    Amato, Francesco; Polara, Giorgio

    The aim of this study was to investigate the survival rate of implants immediately placed in fresh extraction sockets of molars in the maxilla and mandible with a single-stage procedure. A total of 102 patients were treated, and 107 implants (53 in the maxilla and 54 in the mandible) were placed in a fresh molar extraction socket and connected to a healing abutment. After a mean follow-up of 3 years (range: 1 to 6 years) 1 implant failed, for a cumulative success rate of 99.06% (98.11% for the mandible and 100% for the maxilla). The results of this study support placement of an implant immediately after the extraction of a molar, applying a single-stage procedure.

  7. Hyaluronic Acid Improves Bone Formation in Extraction Sockets With Chronic Pathology: A Pilot Study in Dogs.

    Science.gov (United States)

    Kim, Jung-Ju; Song, Hyun Young; Ben Amara, Heithem; Kyung-Rim, Kang; Koo, Ki-Tae

    2016-07-01

    Previous studies on ridge preservation focusing on fresh extraction sockets using graft materials for ridge preservation procedures have reported a delay in the tissue modeling and remodeling phases. The objective of this study is to evaluate the effect of hyaluronic acid (HA) on healing of infected sockets. Six beagle dogs were used in this study. Both mandibular third premolars were hemisected, and the distal roots were extracted. Subsequently, periodontal and endodontic lesions were induced at the remaining mesial root. After communication of the periodontal lesion, an endodontic periapical lesion was observed at 4 months, and the mesial roots of both the right and left sides were extracted. HA was applied into the socket of the test group, and no treatment was administered to the other group (control group). Three months after extraction of the mesial roots, the dogs were sacrificed, and histologic evaluations were performed. The sockets were filled by mineralized bone (47.80% ± 6.60%) and bone marrow (50.47% ± 6.38%) in the control group, whereas corresponding values were 63.29% ± 9.78% and 34.73% ± 8.97% for the test group, respectively. There was a statistically significant difference between the groups. Reversal lines and a copious lineup of osteoblasts were observed in the middle and apical parts of the sockets in the test group. An infected socket shows delayed healing of the socket wound, and HA, because of its osteoinductive, bacteriostatic, and anti-inflammatory properties, may improve bone formation and accelerate wound healing in infected sockets.

  8. Effect of irradiation on the healing of extraction sockets in diabetic rats

    International Nuclear Information System (INIS)

    Kim, Il Joong; Hwang, Eui Hwan; Lee, Sang Rae

    2003-01-01

    To observe the histologic pattern of healing in molar tooth extraction sockets of streptozotocin-induced diabetic rats following irradiation. Mature Sprague-Dawley rats were divided into three groups: control, diabetic, and diabetic-irradiated groups. Diabetes mellitus was induced by injecting streptozotocin. Control rats were injected with a citrate buffer only. After 5 days, the right maxillary first molar was extracted under general anesthesia from each of the rats. After the extraction, rats in the diabetic-irradiated group were irradiated with a single absorbed dose of 10 Gy to the head and neck region. The rats were killed at 1, 3, 7, 14, 21, and 28 days after treatment. Tissue sections were stained with hematoxylin-eosin and Masson's trichrome. In the diabetic and diabetic-irradiated groups, the early healing process of the socket extraction was similar to the control group, but bone formation was delayed at 7 days after the treatment. In the diabetic-irradiated group, alveolar bone surrounding the extraction socket showed sighs of necrosis at 3 days after treatment, and hemorrhage was observed in connective tissue within the extraction socket at 14 days after treatment. The experiment revealed that the healing process of the extraction socket was severely delayed and retarded by irradiation in the diabetic state.

  9. Effect of irradiation on the healing of extraction sockets in diabetic rats

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Il Joong; Hwang, Eui Hwan; Lee, Sang Rae [Kyunghee University College of Medicine, Seoul (Korea, Republic of)

    2003-03-15

    To observe the histologic pattern of healing in molar tooth extraction sockets of streptozotocin-induced diabetic rats following irradiation. Mature Sprague-Dawley rats were divided into three groups: control, diabetic, and diabetic-irradiated groups. Diabetes mellitus was induced by injecting streptozotocin. Control rats were injected with a citrate buffer only. After 5 days, the right maxillary first molar was extracted under general anesthesia from each of the rats. After the extraction, rats in the diabetic-irradiated group were irradiated with a single absorbed dose of 10 Gy to the head and neck region. The rats were killed at 1, 3, 7, 14, 21, and 28 days after treatment. Tissue sections were stained with hematoxylin-eosin and Masson's trichrome. In the diabetic and diabetic-irradiated groups, the early healing process of the socket extraction was similar to the control group, but bone formation was delayed at 7 days after the treatment. In the diabetic-irradiated group, alveolar bone surrounding the extraction socket showed sighs of necrosis at 3 days after treatment, and hemorrhage was observed in connective tissue within the extraction socket at 14 days after treatment. The experiment revealed that the healing process of the extraction socket was severely delayed and retarded by irradiation in the diabetic state.

  10. Extraction Socket Preservation Using Porcine-Derived Collagen Membrane Alone or Associated with Porcine-Derived Bone. Clinical Results of Randomized Controlled Study

    Directory of Open Access Journals (Sweden)

    Renzo Guarnieri

    2017-03-01

    Full Text Available Objectives: The aim of present randomized controlled clinical trial was to clinically evaluate hard tissue changes after extraction socket preservation procedures compared to natural spontaneous healing. Material and Methods: Thirty patients were enrolled in the present study and underwent single-tooth extraction in the premolar/molar areas. Ten sites were grafted with porcine-derived bone covered by collagen membrane, 10 covered by porcine-derived collagen membrane alone, and 10 underwent natural spontaneous healing. Vertical and horizontal bone changes after 3-month were evaluated at implant placement. Results: The vertical and horizontal bone changes at the extraction sockets treated with collagen membrane alone (vertical: -0.55 [SD 0.11] mm, and horizontal: -1.21 [SD 0.69] mm and collagen membrane plus porcine-derived bone (vertical: -0.37 [SD 0.7] mm, and horizontal: -0.91 [SD 0.53] mm were found significantly lower (P < 0.001, when compared to non-grafted sockets (vertical: -2.09 [SD 0.19] mm, and horizontal: -3.96 [SD 0.87] mm. In type 1 extraction sockets, in premolar sites, and in presence of vestibular bone thicknesses ≥ 1.5 mm, the use of collagen membrane alone revealed similar outcomes to those with additional graft material. Conclusions: At the re-entry surgery, extraction sockets grafted with porcine-derived bone and covered by collagen membrane, and extraction sockets covered by porcine-derived collagen membrane alone, showed significantly lower vertical and horizontal bone changes, compared to extraction sockets sites underwent natural spontaneous healing. However, a complete prevention of remodelling is not achievable, irrespective of the technique used.

  11. Computer-Guided Implant Surgery in Fresh Extraction Sockets and Immediate Loading of a Full Arch Restoration: A 2-Year Follow-Up Study of 14 Consecutively Treated Patients

    Science.gov (United States)

    Daas, M.; Assaf, A.; Dada, K.; Makzoumé, J.

    2015-01-01

    Statement of Problem. Low scientific evidence is identified in the literature for combining implant placement in fresh extraction sockets with immediate function. Moreover, the few studies available on immediate implants in postextraction sites supporting immediate full-arch rehabilitation clearly lack comprehensive protocols. Purpose. The purpose of this study is to report outcomes of a comprehensive protocol using CAD-CAM technology for surgical planning and fabrication of a surgical template and to demonstrate that immediate function can be easily performed with immediate implants in postextraction sites supporting full-arch rehabilitation. Material and Methods. 14 subjects were consecutively rehabilitated (13 maxillae and 1 mandible) with 99 implants supporting full-arch fixed prostheses followed between 6 and 24 months (mean of 16 months). Outcome measures were prosthesis and implant success, biologic and prosthetic complications, pain, oedema evaluation, and radiographic marginal bone levels at surgery and then at 6, 12, 18, and 24 months. Data were analyzed with descriptive statistics. Results. The overall cumulative implant survival rate at mean follow-up time of 16 months was 97.97%. The average marginal bone loss was 0,9 mm. Conclusions. Within the limitations of this study, the results validate this treatment modality for full-arch rehabilitations with predictable outcomes and high survival rate after 2 years. PMID:26064119

  12. Histomorphometric evaluation of a calcium-phosphosilicate putty bone substitute in extraction sockets.

    Science.gov (United States)

    Kotsakis, Georgios A; Joachim, Frederic P C; Saroff, Stephen A; Mahesh, Lanka; Prasad, Hari; Rohrer, Michael D

    2014-01-01

    The objective of this study was to evaluate bone regeneration in 24 sockets grafted with a calcium phosphosilicate putty alloplastic bone substitute. A core was obtained from 17 sockets prior to implant placement for histomorphometry at 5 to 6 months postextraction. Radiographic analysis during the same postextraction healing period showed radiopaque tissue in all sockets. Histomorphometric analysis revealed a mean vital bone content of 31.76% (± 14.20%) and residual graft content of 11.47% (± 8.99%) after a mean healing period of 5.7 months. The high percentage of vital bone in the healed sites in combination with its timely absorption rate suggest that calcium phosphosilicate putty can be a reliable choice for osseous regeneration in extraction sockets.

  13. Subclassification and Clinical Management of Extraction Sockets with Labial Dentoalveolar Dehiscence Defects.

    Science.gov (United States)

    Chu, Stephen J; Sarnachiaro, Guido O; Hochman, Mark N; Tarnow, Dennis P

    2015-01-01

    Immediate implant therapy involving implants placed into intact Type 1 extraction sockets has become a consistent clinical technique. The classification of Type 2 extraction sockets, where the mucosal tissues are present but there is a midfacial osseous dehiscence defect, has been described according to the extent of the buccal bone plate absence. The literature has offered different techniques in the treatment of Type 2 sockets; however, the extent of the defect has never been defined or delineated. In this article, the authors describe a subclassification of Type 2 sockets: Type 2A presents with a dehiscence defect roughly 5 mm to 6 mm from the free gingival margin (FGM) involving the coronal one-third of the labial bone plate; Type 2B presents with a dehiscence defect involving the middle one-third of the labial plate, approximately 7 mm to 9 mm from the FGM; and in Type 2C the dehiscence defect involves the apical one-third of the labial osseous plate roughly 10 mm or greater from the FGM. The authors also offer a protocol and technique employing immediate implant placement, guided bone regeneration, and bone graft containment with a custom two-piece healing abutment that can lead to consistent and satisfactory clinical outcomes in low-smile-line patients. The treatment protocol and sequence is outlined in a clinical case presentation involving a Type 2B socket.

  14. Integrated versus non-integrated orbital implants for treating anophthalmic sockets.

    Science.gov (United States)

    Schellini, Silvana; El Dib, Regina; Silva, Leandro Re; Farat, Joyce G; Zhang, Yuqing; Jorge, Eliane C

    2016-11-07

    Anophthalmia is the absence of one or both eyes, and it can be congenital (i.e. a birth defect) or acquired later in life. There are two main types of orbital implant: integrated, whereby the implant receives a blood supply from the body that allows for the integration of the prosthesis within the tissue; and non-integrated, where the implant remains separate. Despite the remarkable progress in anophthalmic socket reconstruction and in the development of various types of implants, there are still uncertainties about the real roles of integrated (hydroxyapatite (HA), porous polyethylene (PP), composites) and non-integrated (polymethylmethacrylate (PMMA)/acrylic and silicone) orbital implants in anophthalmic socket treatment. To assess the effects of integrated versus non-integrated orbital implants for treating anophthalmic sockets. We searched CENTRAL (which contains the Cochrane Eyes and Vision Trials Register) (2016, Issue 7), Ovid MEDLINE, Ovid MEDLINE In-Process and Other Non-Indexed Citations, Ovid MEDLINE Daily, Ovid OLDMEDLINE (January 1946 to August 2016), Embase (January 1980 to August 2016), Latin American and Caribbean Health Sciences Literature Database (LILACS) (1982 to August 2016), the ISRCTN registry (www.isrctn.com/editAdvancedSearch), ClinicalTrials.gov (www.clinicaltrials.gov), and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) (www.who.int/ictrp/search/en). We did not use any date or language restrictions in the electronic searches for trials. We last searched the electronic databases on 8 August 2016. Randomised controlled trials (RCTs) and quasi-RCTs of integrated and non-integrated orbital implants for treating anophthalmic sockets. Two authors independently selected relevant trials, assessed methodological quality and extracted data. We included three studies with a total of 284 participants (250 included in analysis). The studies were conducted in India, Iran and the Netherlands. The three

  15. Sequential healing of open extraction sockets. An experimental study in monkeys.

    Science.gov (United States)

    Scala, Alessandro; Lang, Niklaus P; Schweikert, Michael T; de Oliveira, José Américo; Rangel-Garcia, Idelmo; Botticelli, Daniele

    2014-03-01

    To describe the sequential healing of open extraction sockets at which no attempts to obtain a primary closure of the coronal access to the alveolus have been made. The third mandibular premolar was extracted bilaterally in 12 monkeys, and no sutures were applied to close the wound. The healing after 4, 10, 20, 30, 90 and 180 days was morphometrically studied. After 4 days of healing, a blood clot mainly occupied the extraction sockets, with the presence of an inflammatory cells' infiltrate. A void was confined in the central zones of the coronal and middle regions, in continuity with the entrance of the alveoli. At 10 days, the alveolus was occupied by a provisional matrix, with new bone formation lining the socket bony walls. At 20 days, the amount of woven bone was sensibly increasing. At 30 days, the alveolar socket was mainly occupied by mineralized immature bone at different stages of healing. At 90 and 180 days, the amount of mineralized bone decreased and substituted by trabecular bone and bone marrow. Bundle bone decreased from 95.5% at 4 days to 7.6% at 180 days, of the whole length of the inner alveolar surface. Modeling processes start from the lateral and apical walls of the alveolus, leading to the closure of the socket with newly formed bone within a month from extraction. Remodeling processes will follow the previous stages, resulting in trabecular and bone marrow formation and in a corticalization of the socket access. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

  16. Magnesium-enriched hydroxyapatite compared to calcium sulfate in the healing of human extraction sockets: radiographic and histomorphometric evaluation at 3 months.

    Science.gov (United States)

    Crespi, Roberto; Capparè, Paolo; Gherlone, Enrico

    2009-02-01

    Reduction of alveolar height and width after tooth extraction may present problems for implant placement, especially in the anterior maxilla where bone volume is important for biologic and esthetic reasons. Different graft materials have been proposed to minimize the reduction in ridge volume. The aim of this study was to compare radiographic and histomorphometric results of magnesium-enriched hydroxyapatite (MHA) and calcium sulfate (CS) grafts in fresh sockets after tooth extractions. Forty-five fresh extraction sockets with three bone walls were selected in 15 patients. A split-mouth design was used: 15 sockets on the right side of the jaw received MHA, 15 sockets on the left side received CS, and 15 random unfilled sockets were considered the control (C) group. Intraoral digital radiographs were taken at baseline and at 3 months after graft material placement. At 3 months, cylinder bone samples were obtained for histology and histomorphometry analysis. The difference in mean radiographic vertical bone level from baseline to 3 months was -2.48 +/- 0.65 mm in the CS group, -0.48 +/- 0.21 mm in the MHA group, and -3.75 +/- 0.63 mm in the unfilled C group. Statistically significant differences (P sockets showed 13.9% +/- 3.4% residual implant material, whereas the MHA-treated sockets showed 20.2% +/- 3.2% residual material. The difference between the groups was statistically significant (P <0.05). Radiographs revealed a greater reduction of alveolar ridge in the CS group than in the MHA group. Histologic examination showed more bone formation and faster resorption in the CS group and more residual implant material in the MHA group.

  17. Sequential healing at implants installed immediately into extraction sockets. An experimental study in dogs.

    Science.gov (United States)

    Mainetti, Tomaso; Lang, Niklaus P; Bengazi, Franco; Favero, Vittorio; Soto Cantero, Luis; Botticelli, Daniele

    2016-01-01

    To compare the sequential healing at implants installed in a healed alveolar bony ridge or immediately after tooth extraction without functional load. In the mandible of 12 dogs, the mesial roots of the first molars were endodontically treated, the tooth hemisected, and the distal roots extracted. After 3 months, the mesial roots of the fourth premolars were endodontically treated, the tooth hemisected, and the distal roots extracted in one side of the mandible. Implants were placed immediately into extraction sockets (IPIES) of the fourth premolar and in the healed sites in the molar regions. Healing abutments were placed, and the flaps were sutured to allow a non-submerged healing. The time of surgery and of sacrifices were planned in such a way to obtain biopsies representing the healing after 1 and 2 weeks and 1 and 3 months, respectively. Ground sections were prepared for histological evaluation of tissues components on the implant surface and the coronal termination level of osseointegration (M-B). New bone apposition on the implant surface was slightly higher at the healed compared to the IPIES sites, being 7.4% and 4.1% after 1 week, and 67.3% and 65.3% after 3 months, respectively. Old bone was progressively resorbed, from 27.0% and 21.9% after 1 week, to 2.5% and 2.0% after 3 months, at healed and IPIES sites, respectively. M-B was 1.4 mm and 2.6 mm after 1 week, 1.2 mm and 1.2 mm after 3 months, at healed and IPIES sites, respectively. Similar patterns of sequential osseointegration were found at implants installed in healed alveolar bone or in alveolar sockets immediately after tooth extraction. The coronal termination level of osseointegration, that was different after 1 week, was found similar at the 3-month observation. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  18. Post-extraction application of beta-tricalcium phosphate in alveolar socket

    Directory of Open Access Journals (Sweden)

    M. Muñoz-Corcuera

    2015-03-01

    Full Text Available Aim The objective of this study was to assess the capacity of beta-tricalcium phosphate to facilitate bone formation in the socket and prevent post-extraction alveolar resorption. Materials and methods After premolar extraction in 16 patients, the sockets were filled with beta-tricalcium phosphate. Six months later, during the implant placement surgery, a trephine was used to harvest the bone samples which were processed for histological and histomorphometrical analyses. Data were gathered on patient, clinical, histological and histomorphometric variables at the extraction and implant placement sessions, using data collection forms and pathological reports. Results Clinical outcomes were satisfactory, the biomaterial was radio-opaque on X-ray. Histological study showed: partial filling with alveolar bone of appropriate maturation and mineralization for the healing time, osteoblastic activity and bone lacunae containing osteocytes. The biomaterial was not completely resorbed at six months. Conclusion Beta-tricalcium phosphate is a material capable of achieving preservation of the alveolar bone when it is positioned in the immediate post-extraction socket followed by suture; it also helps the formation of new bone in the socket. Further studies are needed comparing this technique with other available biomaterials, with growth factors and with sites where no alveolar preservation techniques are performed.

  19. Survival of Implants in Immediate Extraction Sockets of Anterior Teeth: Early Clinical Results.

    Science.gov (United States)

    Sabir, Mohammad; Alam, Mohammad Nazish

    2015-06-01

    The aims and objectives of this study were placement of implants in freshly extracted sockets of anterior teeth and to evaluate the implant stability, peri-implant radiolucency and gingival inflammation around implant over a short period of 30 months. A total of 12 patients (8 male and 4 female), ranging in the age from 20 to 50 years, from March 2007 to June 2007, were evaluated for immediate implant placement into 22 fresh extraction sockets. Only maxillary and mandibular anterior teeth/roots (central incisors, lateral incisors and canines) were considered for replacement with implants. One piece implant with integrated abutment and integrated surface, non-submerged, threaded and tapered at apical 5 mm, sand-blasted and acid etched surfaced implants (HI-TEC TRX-OP Implants of Life Care Company) were used. The mobility was not present in any of the implants at all the follow up visits. There were 2 implants at 6 month, 1 implant at 12 month, 1 implant at 18 month visits, showing peri-implant radiolucency at some sites at bone to implant contact site. Severe gingival inflammation was not observed in any of the implant site. At every follow-up visit, every implant met the criteria of success and none was found to be failed over a 30 months duration i.e. 100% success rate was achieved by implants in immediate extraction socket. The success rate of implant survival in this study was found 100%. These implants have fulfilled all the criteria of implant success and based on the defined criteria, the success rate of implants placed in immediate extraction sockets of anterior teeth compared favorably with the conventional implants. The early results of the present study showed that high survival rates with the implants in immediate extraction sockets can be achieved.

  20. Deepening Fornix Technique Using Central Split-Medium Thickness Skin Graft to Treat Contracted Anophthalmic Sockets.

    Science.gov (United States)

    AlHassan, Sultan; Galindo-Ferreiro, Alicia; Khandekar, Rajiv; AlShaikh, Osama; Schellini, Silvana Artioli

    2018-05-08

    The aim of thhis study was to present the outcomes of postauricular split-medium thickness skin graft (SMTSG) to treat anophthalmic sockets with contracted fornices. This case series enrolled patients with grade 2 or 3 anophthalmic sockets between 2015 and 2016. Data were collected on patient demographics, objective and subjective parameters preoperatively and 180 days postoperatively. Success of the surgery was graded on the height of the graft, the depth of the superior and inferior fornices, and presence/abscence of lagophthalmos, entropion, and ability to retain an external prosthesis. Eighteen patients were enrolled with a mean age of 35.9 ± 18 years. The median height of the graft was 22 mm (25% quartile = 18.75) when removed and 20 mm (25% quartile = 16) postoperatively. The median depth of the superior fornix was 6.5 mm (25% quartile = 4.5 mm) preoperatively and 10 mm (25% quartile = 8 mm) postoperatively (P = 0.5). The median inferior fornix depth was 7 mm (25% quartile = 3.5 mm) preoperatively and 8 mm (25% quartile = 5 mm) (P = 0.27) postoperatively. Preoperatively, there were 13 (72.2%) patients with lagophthalmos, 10 (44.4%) with entropion, 3 (37.5%) with poor prosthesis retention, and 5 (62.5%) who were unable to retain the prosthesis. Postoperatively, 7 (38.9%) patients had lagophthamos, 1 (5.6%) had entropion, and all the patients could retain the prosthesis. None of the sockets had a foul odor postoperatively. Postauricular SMTSG achieves successful outcomes for the treatment of contracted anophthalmic sockets, reshaping the anterior socket surface and deepening the fornices.

  1. The influence of platelet-rich plasma on the healing of extraction sockets: an explorative randomised clinical trial.

    Science.gov (United States)

    Alissa, Rami; Esposito, Marco; Horner, Keith; Oliver, Richard

    2010-01-01

    =0.03), and food stagnation in the operation area (P=0.03). The difference between groups was not statistically significant for patient satisfaction with the treatment (P=0.31). Regarding complications, two dry sockets and one acutely inflamed alveolus occurred in patients of the control group, which determined a borderline statistically significant difference in favour of the PRP group (P=0.06). Soft tissue healing was significantly better in patients treated with PRP (P=0.03). Radiographic evaluation carried out by the two blinded examiners revealed a statistically significant difference (P=0.01) for sockets with dense homogeneous trabecular pattern, a borderline statistically significant difference in the trabecular pattern for bone volume (P=0.06) favouring PRP use, and no significant differences for trabecular separation (P=0.66), trabecular length (P=0.16), trabecular width (P=0.16) and trabecular number (P=0.38). PRP may have some benefits in reducing complications such as alveolar osteitis and improving healing of soft tissue of extraction sockets. There were insufficient data to support the use of PRP to promote bone healing or to enhance the quality of life of patients following tooth extraction, although the sample size was too small to detect statistically significant differences.

  2. Evaluation of Amoxicillin & Cephalexin concentrations in dental alveolar sockets after tooth extraction

    OpenAIRE

    Fakhraei AH.; Jabal Ameli F.; Ghobadi G

    2005-01-01

    Statement of Problem: One of the most important complications after tooth extraction and oral and maxillofacial surgery is transient bacteraemia and prescription of prophylactic antibiotic is necessary to prevent postoperative infections in immunocompromised patients. Purpose: The aim of this study was the evaluation of cephalexin and amoxicillin concentrations in dental alveolar sockets following tooth extraction. Materials and Methods: In this interventional study, 80 healthy patients subje...

  3. Effect of piezoelectric instruments on healing propensity of alveolar sockets following mandibular third molar extraction

    OpenAIRE

    Shang-Jye Tsai; Yen-Liang Chen; Hao-Hueng Chang; Yow-Chyun Shyu; Chun-Pin Lin

    2012-01-01

    Background/purpose: The purpose of this study was to investigate whether the use of piezoelectric instruments affected the healing propensity of alveolar sockets after mandibular third molar extraction, compared with conventional rotary instruments. Materials and methods: Thirty patients with impacted bilateral symmetrical mandibular third molars participated in this investigation. We conducted a randomized, crossover study using conventional rotary instruments for extraction on one side a...

  4. Orthodontic space closure in combination with membrane supported healing of extraction sockets (MHE) a pilot study.

    Science.gov (United States)

    Tiefengraber, Julia; Diedrich, Peter; Fritz, Ulrike; Lantos, Peter

    2002-09-01

    In periodontology and implantology the guided bone regeneration (GBR) technique represents a well established and successful method for augmentation of alveolar bone. The aim of the present study was to evaluate what advantages, if any, are offered for orthodontic space closure by membrane supported healing of extraction sockets (MHE) (criteria: rate of movement, incidence of gingival clefts, atrophy of the alveolar bone). Within the scope of orthodontic therapy with a complete fixed appliance, three girls aged 11-14 years with indication for extraction of the first premolars were unilaterally augmented with an e-PTFE membrane (Gore-Tex((R)), W. L. Gore & Associates, Flagstaff, AZ, USA) immediately after premolar extraction. The study was performed in the split-mouth technique. An atraumatic extraction without digital compression was performed on the control side. The membranes were fixed with a Frios((R)) fixation set (Friadent, GmbH, Mannheim, Germany) and removed after 6 to 8 weeks. 1 week after membrane removal, space closure was started simultaneously with passive rectangular segmented archwires using Sentalloy((R)) closed coil springs (GAC International, Inc., Gräfelfing, Germany) at a constant force of 200 cN. The transversal and vertical dimensions of the alveolar bone the rate of space closure were determined clinically and radiographically. Complications were not observed in any patient. The MHE-treated alveolar region showed pronounced stability of the transversal dimension. Space closure was performed in all cases without gingival clefts being induced. The control side showed distinct atrophy as well as gingival clefts. No differences were recorded in the rate of space closure. The MHE technique seems to be a suitable means of creating favorable periodontal conditions for tooth movement, especially in cases of alveolar bone loss after extraction or trauma.

  5. Evaluation of guided bone generation around implants placed into fresh extraction sockets: an experimental study in dogs

    DEFF Research Database (Denmark)

    Gotfredsen, K; Nimb, L; Buser, D

    1993-01-01

    Immediate placement of implants into fresh extraction sockets would have the principal advantage of decreasing the recommended period of healing. It also would result in a guided placement of the implant, and it could reduce the resorption of the alveolar bone in the extraction area. However, when...... an implant is placed immediately into an extraction socket, it may not engage the walls of the socket near the crest of the alveolar ridge. With the presence of a bone defect around an implant, ingrowth of soft tissue could compromise the achievement of osseointegration in the crestal bone area....... The objective of this study was to evaluate the crestal bone healing response adjacent to implants placed immediately into fresh extraction sockets with and without covering membranes. Eight adult mongrel dogs had the third and fourth mandibular premolars extracted bilaterally. Thirty-two submerged titanium...

  6. [The effect of osteogenic inducer on healing of tooth extraction sockets].

    Science.gov (United States)

    Chen, Junliang; Shan, Chuncheng; He, Yun; Xia, Delin

    2012-06-01

    To study the effect of osteogenic inducer (dexamethasone, beta-sodium glycerophosphate and Vitamin C) carried by gelatin sponge on healing and remodeling of tooth extraction sockets. Fifty rabbits were selected. After extracting the first premolars of bilateral maxillary, the right side tooth extraction sockets were filled with gelatin sponge containing osteogenic inducer as experimental side, tooth extraction sockets on left side were filled with gelatin sponge as control. Every ten rabbits were executed at the end of 1, 2, 4, 8, 12 weeks after tooth extraction. Bone density was measured through digital X-ray images. The specimens were examined by histology. The absorption height of alveolar bone at 12 weeks was measured. X-ray measurement showed that the bone density of experimental side was higher than that of control side at 2, 4, 8, 12 weeks, the difference had statistical significance (Psockets of experimental side was earlier than that in control side. The absorptional height of alveolar bone had significant difference between experimental side and control side (Psockets can promote the healing and new bone formation and prevent from alveolar bone absorption.

  7. Healing of extraction sockets and augmented alveolar defects following 1-year treatment with bisphosphonate.

    Science.gov (United States)

    Khojasteh, Arash; Behnia, Hossein; Morad, Golnaz; Dashti, Seyedeh Ghazaleh; Dehghan, Mohammad Mehdi; Shahab, Shahriyar; Abbas, Fatemeh Mashhadi

    2013-01-01

    To assess the effect of bisphosphonates on healing of extraction sockets and augmented alveolar defects, 12 adult female mongrel dogs were assigned to 2 experimental groups and a control group. The experimental groups received oral alendronate (ALN, 3.5 mg/kg/wk) or IV pamidronate (PAM, 1 mg/kg/wk) for 12 months. Animals were randomly tested for serum C-terminal telopeptide of collagen I (CTx). The right first and second premolars were extracted. After 8 weeks, extraction sites were evaluated for healing. Subsequently, 3-wall defects were created in ridges and filled with human mineralized cortical particulate bone. Two months post-augmentation, animals were sacrificed and mandibles were collected for cone-beam computed tomography (CBCT) and histomorphometric appraisal. The obtained data were compared using 1-way ANOVA test. CTx test results in both experimental groups were comparable (alveolar bone in the PAM group and the upper rim of the alveoli in the ALN group. Histologically, bone sequestra from the PAM group demonstrated empty osteocyte lacunae, while in the ALN group areas of necrotic bone along with evidence of active bone remodeling was distinguished. Eight weeks post-augmentation, the experimental groups showed no evidence of bone formation in the augmented area, while bone formation ratio was measured to be 18.32% in the control group. The mean amount of pixel intensity calculated from the CBCT images of the ALN, PAM, and control group was 113.69 ± 11.04, 124.94 ± 4.72, and 113.69 ± 6.63, respectively. Pixel intensity in PAM-treated group was significantly higher than both other groups. This study demonstrated that 1-year treatment with ALN/PAM was associated with impairment of post-extraction and post-augmentation bone healing in dogs.

  8. Soft Tissue Closure of Grafted Extraction Sockets in the Anterior Maxilla: A Modified Palatal Pedicle Connective Tissue Flap Technique.

    Science.gov (United States)

    El Chaar, Edgard; Oshman, Sarah; Cicero, Giuseppe; Castano, Alejandro; Dinoi, Cinzia; Soltani, Leila; Lee, Yoonjung Nicole

    Localized ridge resorption, the consequence of socket collapse, following tooth extraction in the anterior maxilla can adversely affect esthetics, function, and future implant placement. Immediate grafting of extraction sockets may help preserve natural ridge contours, but a lack of available soft tissue can compromise the final esthetic outcome. The presented modified rotated palatal pedicle connective tissue flap is a useful technique for simultaneous soft tissue coverage and augmentation of grafted sockets to improve esthetic outcome. This article delineates its advantages through the presentation of a four-case series using this new technique.

  9. Osseointegration of dental implants in extraction sockets preserved with porous titanium granules - an experimental study.

    Science.gov (United States)

    Verket, Anders; Lyngstadaas, Ståle P; Rønold, Hans J; Wohlfahrt, Johan C

    2014-02-01

    This study investigated osseointegration of dental implants inserted in healed extraction sockets preserved with porous titanium granules (PTG). Three adult female minipigs (Gøttingen minipig; Ellegaard A/S, Dalmose, Denmark) had the mandibular teeth P2, P3 and P4 extracted. The extraction sockets were preserved with metallic PTG (Tigran PTG; Tigran Technologies AB, Malmö, Sweden) n = 12, heat oxidized white porous titanium granules (WPTG) (Tigran PTG White) n = 12 or left empty (sham) n = 6. All sites were covered with collagen membranes (Bio-Gide; Geistlich Pharma, Wolhausen, Switzerland) and allowed 11 weeks of healing before implants (Straumann Bone Level; Straumann, Basel, Switzerland) were inserted. The temperature was measured during preparation of the osteotomies. Resonance frequency analysis (RFA, Osstell; Osstell AB, Gothenburg, Sweden) was performed at implant insertion and at termination. After 6 weeks of submerged implant healing, the pigs were euthanized and jaw segments were excised for microCT and histological analyses. In the temperature and RFA analyses no significant differences were recorded between the test groups. The microCT analysis demonstrated an average bone volume of 61.7% for the PTG group compared to 50.3% for the WPTG group (P = 0.03) and 57.1% for the sham group. Histomorphometry demonstrated an average bone-to-implant contact of 68.2% for the PTG group compared to 36.6% for the WPTG group and 60.9% for the sham group (n.s). Eight out of ten implants demonstrated apical osseous defects in the WPTG group, but similar defects were observed in all groups. PTG preserved extraction sockets demonstrate a similar outcome as the sham control group for all analyses suggesting that this material potentially can be used for extraction socket preservation prior to implant installment. Apical osseous defects were however observed in all groups including the sham group, and a single cause could not be determined. © 2012 John Wiley & Sons A/S.

  10. Is ridge preservation/augmentation at periodontally compromised extraction sockets safe? A retrospective study.

    Science.gov (United States)

    Kim, Jung-Ju; Ben Amara, Heithem; Schwarz, Frank; Kim, Hae-Young; Lee, Jung-Won; Wikesjö, Ulf M E; Koo, Ki-Tae

    2017-10-01

    This study aimed to evaluate the safety of ridge preservation/augmentation procedures when performed at compromised extraction sockets. Patients subject to ridge preservation/augmentation at periodontally compromised sockets at Seoul National University Dental Hospital (SNUDH) were evaluated in a chart review. Tooth extractions due to acute infection were not included in our study as chronically formed lesions are the only lesions that can be detected from radiographic images. If inflammatory symptoms persisted following ridge preservation/augmentation and antimicrobial and anti-inflammatory therapy, the patient was categorized as a re-infection case and implanted biomaterial removed. Of 10,060 patients subject to tooth extractions at SNUDH, 2011 through 2015, 297 cases meeting inclusion criteria were reviewed. The severity and type of lesions were not specific because extracting data was only done by radiographic images and chart records. The review identified eight patients exhibiting inflammatory symptoms that required additional antimicrobial and anti-inflammatory therapy. Within this group, re-infection occurred in two patients requiring biomaterials removal. The final safety rate for the ridge preservation/augmentation was 99.3%. None of the demographic factors, systemic conditions or choice of biomaterial affected the safety of ridge preservation/augmentation. Alveolar ridge preservation/augmentation at periodontally compromised sockets appears safe following thorough removal of infectious source. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  11. Effects of increased low-level diode laser irradiation time on extraction socket healing in rats.

    Science.gov (United States)

    Park, Joon Bong; Ahn, Su-Jin; Kang, Yoon-Goo; Kim, Eun-Cheol; Heo, Jung Sun; Kang, Kyung Lhi

    2015-02-01

    In our previous studies, we confirmed that low-level laser therapy (LLLT) with a 980-nm gallium-aluminum-arsenide diode laser was beneficial for the healing of the alveolar bone in rats with systemic disease. However, many factors can affect the biostimulatory effects of LLLT. Thus, we attempted to investigate the effects of irradiation time on the healing of extraction sockets by evaluating the expressions of genes and proteins related to bone healing. The left and right first maxillary molars of 24 rats were extracted. Rats were randomly divided into four groups in which extraction sockets were irradiated for 0, 1, 2, or 5 min each day for 3 or 7 days. Specimens containing the sockets were examined using quantitative real-time reverse transcription polymerase chain reaction and western blotting. LLLT increased the expressions of all tested genes, Runx2, collagen type 1, osteocalcin, platelet-derived growth factor-B, and vascular endothelial growth factor, in a time-dependent manner. The highest levels of gene expressions were in the 5-min group after 7 days. Five minutes of irradiation caused prominent increases of the expression of all tested proteins after both 3 and 7 days. The expression level of each protein in group 4 was higher by almost twofold compared with group 1 after 7 days. Laser irradiation for 5 min caused the highest expressions of genes and proteins related to bone healing. In conclusion, LLLT had positive effects on the early stages of bone healing of extraction sockets in rats, which were irradiation time-dependent.

  12. Comparison of the effectiveness of two different bone substitute materials for socket preservation after tooth extraction: a controlled clinical study.

    Science.gov (United States)

    Shakibaie-M, Behnam

    2013-01-01

    The aim of this study was to compare the effectiveness of two bone substitute materials for socket preservation after tooth extraction. Extraction sockets in 10 patients were filled with either inorganic bovine bone material (Bio-Oss) or with synthetic material consisting of hydroxyapatite and silicon dioxide (NanoBone). Extraction sockets without filling served as the control. The results demonstrate the effectiveness of the presented protocol for socket preservation and that the choice of a suitable bone substitute material is crucial. The dimensions of the alveolar ridge were significantly better preserved with Bio-Oss than with NanoBone or without treatment. Bio-Oss treatment resulted in better bone quality and quantity for successful implant placement.

  13. Bone physiology in human grafted and non-grafted extraction sockets--an immunohistochemical study.

    Science.gov (United States)

    Nahles, Susanne; Nack, Claudia; Gratecap, Kerrin; Lage, Hermann; Nelson, John J; Nelson, Katja

    2013-07-01

    The aim of the present immunohistological investigation was to define and compare the osteogenic potential with the vascularization of the provisional matrix in grafted and ungrafted extraction sockets after 4 and 12 weeks of healing. A total of 33 Patients (15 women, 18 men) with 65 extraction sites with a mean age of 54.4 years (30-73 years) participated in this study. After tooth extraction, the sockets were augmented with Bio-Oss collagen or non-augmented. At implant placement after 4 or 12 weeks bone biopsies were obtained. Within the specimens the osteogenic and endothelial potential of mesenchymal cells was analyzed in the provisional matrix using immunohistochemical analysis with three monoclonal antibodies Cbfa1/Runx2, Osteocalcin (OC), and CD31. Statistical analysis was performed using Mann-Whitney U-test, Spearman's rank-order correlation coefficient, and the two-factorial analysis for repeated measurements. Of the 65 extraction sockets, 25 (13 non-augmented, 12 augmented) sites after 4 weeks healing time and 40 (19 non-augmented, 21 augmented) sites after 12 weeks healing time were involved in the study. No signs of acute or chronic inflammation were noted in any specimens. After 4 weeks, a median amount of 56% (10-85%) of Cbfa1 positive cells and a median amount of cells expressing OC of 21% (5-42%) were measured. A median CD31 score of 5 was observed. After 12 weeks, a median amount of 61% (19-90%) positive cells expressed by Cbfa1/Runx2 staining a median amount of OC positive cells of 9% (2-17%) was measured. The results at 12 weeks revealed a median score of CD31 positive cells of 3. Osteoblastic activity in the provisional matrix was highest after 4 weeks of healing period. The active zone of bone formation is found in the apical region of the extraction socket during the early healing phase, shifting to the coronal region after 12 weeks. A peak of osteoblast activity within the first weeks is followed by a reduction in mature

  14. Early inhibitory effects of zoledronic acid in tooth extraction sockets in dogs are negated by recombinant human bone morphogenetic protein.

    Science.gov (United States)

    Gerard, David A; Carlson, Eric R; Gotcher, Jack E; Pickett, David O

    2014-01-01

    This study was conducted with 2 purposes. The first was to determine the effect of a single dose of zoledronic acid (ZA) on the healing of a tooth extraction socket in dogs. The second was to determine if placement of recombinant human bone morphogenetic protein-2 (rhBMP-2)/absorbable collagen sponge (ACS) - INFUSE, (Medtronic, Memphis, TN) into these extraction sockets would inhibit the inhibition on bone healing and remodeling by ZA. Nine adult female beagle dogs (2 to 3 yr old) were placed into 3 groups of 3 dogs each. Group I received 15 mL of sterile saline intravenously; group II received 2.5 mg of ZA intravenously; and group III received 5 mg of ZA intravenously. Forty-five days after treatment, all dogs underwent extraction of noncontiguous right and left mandibular first molars and second premolars. In group I, the right mandibular extraction sockets had nothing placed in them, whereas the left mandibular sockets had only ACS placed in them. In groups II and III, the right mandibular sockets had rhBMP-2/ACS placed in them, whereas the left mandibular sockets had only ACS placed. All extraction sockets were surgically closed. Tetracycline was given intravenously 5 and 12 days later, and all animals were euthanized 15 days after tooth extraction. The extraction sockets and rib and femur samples were harvested immediately after euthanasia, processed, and studied microscopically. A single dose of ZA significantly inhibited healing and bone remodeling in the area of the tooth extractions. The combination of rhBMP-2/ACS appeared to over-ride some of the bone remodeling inhibition of the ZA and increased bone fill in the extraction sites, and remodeling activity in the area was noted. The effects of rhBMP-2/ACS were confined to the area of the extraction sockets because bone activity at distant sites was not influenced. A single dose of ZA administered intravenously inhibits early healing of tooth extraction sockets and bone remodeling in this animal model. The

  15. Guided tissue regeneration ensures osseointegration of dental implants placed into extraction sockets. An experimental study in monkeys

    DEFF Research Database (Denmark)

    Warrer, L; Gotfredsen, K; Hjørting-Hansen, E

    1991-01-01

    on the buccal and palatal aspects of the maxillary molars in both sides of the jaw. The second molars were then extracted and self tapping titanium implants of the screw type (Astra Dental Implants) were inserted into the sockets of the largest roots. In the coronal portion of the sockets, a void was always...... present between the implant and the socket walls. In one side of the jaw, a membrane (Gore-Tex Augmentation Material) was adjusted to cover the implant. The implant in the other side of the jaw served as control and was only covered by the tissue flaps. Microscopic analysis after 3 months of healing...... technique can secure complete osseointegration of implants inserted immediately into extraction sockets....

  16. Clinical assessment of bone quality of human extraction sockets after conversion with growth factors.

    Science.gov (United States)

    Ntounis, Athanasios; Geurs, Nico; Vassilopoulos, Philip; Reddy, Michael

    2015-01-01

    The study was conducted to evaluate the effect of mineralized freeze-dried bone allograft (FDBA), alone or in combination with growth factors in extraction sockets, on subjective assessment of bone quality during implant placement. Forty-one patients whose treatment plan involved extraction of anterior or premolar teeth were randomized into four groups: Group 1, collagen plug (control); Group 2, FDBA/β-tricalcium phosphate (β-TCP)/collagen plug; Group 3, FDBA/β-TCP/platelet-rich plasma (PRP)/collagen plug; Group 4, FDBA/β-TCP/recombinant human platelet-derived growth factor BB (rhPDGF-BB)/collagen plug. After 8 weeks of healing, implants were placed. The clinicians assessed bone quality according to the Misch classification. A benchtop calibration exercise test was conducted to evaluate agreement and accuracy of operators in recognizing different bone qualities. Differences were analyzed using one-way analysis of variance (ANOVA) or chi-square tests for continuous and categorical data. Pairwise comparisons were tested using least squares means (LS means). Spearman correlation coefficients were used to evaluate the relationship of bone growth with potential confounders. P .05). Inclusion of bone grafting is associated with a shift from D4 quality to D3 quality bone. Inclusion of PRP in bone grafting eliminates the incidence of D4 bone, establishing D3 and D2 quality bone as prevalent (56% vs. 42%, respectively). Inclusion of rhPDGF-BB and β-TCP in combination with the bone grafting has the same effect, although D2 quality is less prevalent. When compared to sockets grafted with FDBA/β-TCP/collagen plug alone, the sockets with growth factors demonstrated fewer residual bone graft particles. (1) Inclusion of bone grafting enhanced bone quality as assessed during implant placement. (2) Overall inclusion of PRP and rhPDGF-BB enhanced subjective bone quality, eliminating incidence of D4 quality in human extraction sockets. (3) The use of PRP or rhPDGF-BB may

  17. Bone modelling at fresh extraction sockets: immediate implant placement versus spontaneous healing: an experimental study in the beagle dog.

    Science.gov (United States)

    Vignoletti, Fabio; Discepoli, Nicola; Müller, Anna; de Sanctis, Massimo; Muñoz, Fernando; Sanz, Mariano

    2012-01-01

    The purpose of this investigation is to describe histologically the undisturbed healing of fresh extraction sockets when compared to immediate implant placement. In eight beagle dogs, after extraction of the 3P3 and 4P4, implants were inserted into the distal sockets of the premolars, while the mesial sockets were left to heal spontaneously. Each animal provided four socket sites (control) and four implant sites (test). After 6 weeks, animals were sacrificed and tissue blocks were dissected, prepared for ground sectioning. The relative vertical buccal bone resorption in relation to the lingual bone was similar in both test and control groups. At immediate implant sites, however, the absolute buccal bone loss observed was 2.32 (SD 0.36) mm, what may indicate that while an apical shift of both the buccal and lingual bone crest occurred at the implant sites, this may not happen in naturally healing sockets. The results from this investigation showed that after tooth extraction the buccal socket wall underwent bone resorption at both test and control sites. This resorption appeared to be more pronounced at the implant sites, although the limitations of the histological evaluation method utilized preclude a definite conclusion. © 2011 John Wiley & Sons A/S.

  18. Holistic Healing Through Herbs: Effectiveness of Aloe Vera on Post Extraction Socket Healing.

    Science.gov (United States)

    Nimma, Vijaya Lakshmi; Talla, Harsha Vardhan; Bairi, Jaya Krishna; Gopaldas, Madhulatha; Bathula, Haritha; Vangdoth, Sandeep

    2017-03-01

    Advances in the field of alternative medicine has encouraged the use of various natural products for multiple uses in the field of dentistry for treatment of various oral diseases. A natural herbal product is Aloe vera, which has number of benefits with no reported side effects and gaining considerable importance in clinical research. The aim of this cross-sectional randomized interventional study was to evaluate the effectiveness of Aloe vera in the healing of post extraction sockets. A sample size of 40 patients undergoing atraumatic extraction was divided into two groups. Group A-patients were prescribed only analgesics and followed for seven consecutive days and socket healing assessment was done. Group B-Patients were given Aloe vera soaked gel foams, followed up to the third and seventh day by two observers and the socket healing was assessed using the standardized index by Landry, Turnbull and Howley. In addition to healing the common complaint associated with extraction wound, the pain was assessed using numerical rating scale. Data obtained was statistically analysed using Mann-whitney U test, Wilcoxon Signed ranks test and Spearman's rank correlation method. Control group on the third and the seventh day showed healing of 60% and 70% respectively and the Aloe vera group showed a better result having a healing potential of 70% on the third day and 90% on the seventh day which was statistically significant with a (p-valueAloe vera group showed a significant decrease in pain after two hours on the day of extraction followed by second, third and seventh day which was statistically significant (p-valueAloe vera has been proved to have a unique property that is implicated in better healing than other group without any side effects. Aloe vera is economical, effective, powerful nutritional supplement and antioxidant that protects and promotes wound healing.

  19. Holistic Healing Through Herbs: Effectiveness of Aloe Vera on Post Extraction Socket Healing

    Science.gov (United States)

    Talla, Harsha Vardhan; Bairi, Jaya Krishna; Gopaldas, Madhulatha; Bathula, Haritha; Vangdoth, Sandeep

    2017-01-01

    Introduction Advances in the field of alternative medicine has encouraged the use of various natural products for multiple uses in the field of dentistry for treatment of various oral diseases. A natural herbal product is Aloe vera, which has number of benefits with no reported side effects and gaining considerable importance in clinical research. Aim The aim of this cross-sectional randomized interventional study was to evaluate the effectiveness of Aloe vera in the healing of post extraction sockets. Materials and Methods A sample size of 40 patients undergoing atraumatic extraction was divided into two groups. Group A-patients were prescribed only analgesics and followed for seven consecutive days and socket healing assessment was done. Group B-Patients were given Aloe vera soaked gel foams, followed up to the third and seventh day by two observers and the socket healing was assessed using the standardized index by Landry, Turnbull and Howley. In addition to healing the common complaint associated with extraction wound, the pain was assessed using numerical rating scale. Data obtained was statistically analysed using Mann-whitney U test, Wilcoxon Signed ranks test and Spearman’s rank correlation method. Results Control group on the third and the seventh day showed healing of 60% and 70% respectively and the Aloe vera group showed a better result having a healing potential of 70% on the third day and 90% on the seventh day which was statistically significant with a (p-valueAloe vera group showed a significant decrease in pain after two hours on the day of extraction followed by second, third and seventh day which was statistically significant (p-valueAloe vera has been proved to have a unique property that is implicated in better healing than other group without any side effects. Aloe vera is economical, effective, powerful nutritional supplement and antioxidant that protects and promotes wound healing. PMID:28511517

  20. Radiologic study of the healing process of the extracted socket of beagle dogs using cone beam CT

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Bong Won; Lee, Won; Lee, Byung Do [Department of Oral and Maxillofacial Radiology, School of Dentistry, Wonkwang University, Iksan (Korea, Republic of); Kim, De Sok [Department of Electrical Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2009-03-15

    To longitudinally observe the healing process of extracted socket and the alterations of the residual ridge in healthy adult dogs using cone beam CT (CBCT). The mandibular premolars of two beagle dogs were removed and the extraction sites were covered with the gingival tissue. CBCTs (3D X-ray CT scanner, Alphard vega, Asahi Co.) were taken at baseline and at 1 week interval for 12 weeks. Radiographic density of extracted wounds was measured on normalized images with a custom-made image analysis program. The amount of alveolar crestal resorption after the teeth extraction was measured with a reformatted three-dimensional image using CBCT. Bony healing pattern of extracted wound of each group was also longitudinally observed and analyzed. Dimensional changes occurred during the first 6 weeks following the extraction of dogs' mandibular premolars. The reduction of the height of residual ridge was more pronounced at the buccal than at the lingual aspect of the extraction socket. Radiographic density of extracted wounds increased by week 4, but the change in density stabilized after week 6. New bone formation was observed at the floor and the peripheral side of extracted socket from week 1. The entrance of extracted socket was sealed by a hard-tissue bridge at week 5. The healing process of extracted wound involved a series of events including new bone formation and residual ridge resorption.

  1. Radiologic study of the healing process of the extracted socket of beagle dogs using cone beam CT

    International Nuclear Information System (INIS)

    Cho, Bong Won; Lee, Won; Lee, Byung Do; Kim, De Sok

    2009-01-01

    To longitudinally observe the healing process of extracted socket and the alterations of the residual ridge in healthy adult dogs using cone beam CT (CBCT). The mandibular premolars of two beagle dogs were removed and the extraction sites were covered with the gingival tissue. CBCTs (3D X-ray CT scanner, Alphard vega, Asahi Co.) were taken at baseline and at 1 week interval for 12 weeks. Radiographic density of extracted wounds was measured on normalized images with a custom-made image analysis program. The amount of alveolar crestal resorption after the teeth extraction was measured with a reformatted three-dimensional image using CBCT. Bony healing pattern of extracted wound of each group was also longitudinally observed and analyzed. Dimensional changes occurred during the first 6 weeks following the extraction of dogs' mandibular premolars. The reduction of the height of residual ridge was more pronounced at the buccal than at the lingual aspect of the extraction socket. Radiographic density of extracted wounds increased by week 4, but the change in density stabilized after week 6. New bone formation was observed at the floor and the peripheral side of extracted socket from week 1. The entrance of extracted socket was sealed by a hard-tissue bridge at week 5. The healing process of extracted wound involved a series of events including new bone formation and residual ridge resorption.

  2. Estimation of date of death through wound healing of an extraction socket: A case report.

    Science.gov (United States)

    Viciano, Joan; D'Anastasio, Ruggero; D'Ovidio, Cristian; Costantini, Sara; Carnevale, Aldo; Capasso, Luigi

    2017-06-01

    Surgical extraction of teeth due to dental pathologies is a relatively common procedure in modern man. The healing of the wound that results occurs in gradual and sequential stages, such that the analysis of this repair process can be very useful in forensic investigations on human remains. The following study reports on a particular case where the remodeling of a tooth socket allowed an estimation of the time that had elapsed from the day of the surgical extraction of the tooth to the time of death. The corpse was that of a woman of 34 years. It was in an advanced state of decomposition, as it was largely skeletonized. Macroscopic, radiographic, and histological examinations of the oral cavity showed the initial stages of alveolar bone remodeling of the first left mandibular molar, which was characterized by: (i) a small reduction in the vertical height of the vestibular surface with respect to the theoretical original position of the tooth; (ii) resorption of the intra-alveolar septum and lamina dura; and (iii) formation of new immature bone, which covered the entire inner surface of the socket. This study established that the subject died 13-42days after the tooth extraction. Knowing the date of the dental extraction provided by the police investigation, it was possible to provide an estimate of the date of death. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. 2-Dimensional changes of the soft tissue profile of augmented and non-augmented human extraction sockets: a randomized pilot study.

    Science.gov (United States)

    Flügge, Tabea; Nelson, Katja; Nack, Claudia; Stricker, Andres; Nahles, Susanne

    2015-04-01

    This study identified the soft tissue changes of the alveolar ridge at different time points within 12 weeks after tooth extraction with and without socket augmentation. In 38 patients with single tooth extractions, 40 sockets were augmented and 39 extraction sockets were not augmented. At 2, 4, 6, 8 and 12 weeks impressions were taken and casts digitized with a laser scanner. The horizontal and vertical changes were compared between augmented and non-augmented sites. A p-value sockets were between 0.4 mm (2 weeks) and 0.8 mm (12 weeks). In non-augmented sockets changes of 0.7 mm (2 weeks) and of 1.0 mm (12 weeks) were demonstrated. The mean values differed significantly between the buccal and oral region (p sockets showed less resorption within 4 weeks after extraction compared to non-augmented sockets. Non-augmented sockets showed a continuous dimensional loss with a great variation over 12 weeks whereas augmented sockets had the highest degree of resorption between 4 and 6 weeks. At 12 weeks a comparable resorption in augmented and non-augmented sockets was observed. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Comparison of immediate implant placement in infected and non-infected extraction sockets: a systematic review and meta-analysis.

    Science.gov (United States)

    Lee, Jungwon; Park, Dueun; Koo, Ki-Tae; Seol, Yang-Jo; Lee, Yong-Moo

    2018-04-03

    This review aimed to investigate the feasibility of immediate implant placement in infected extraction sockets. We performed electronic and manual searches up to March 2017 to obtain data from randomized controlled trials (RCTs) and nonrandomized controlled clinical trials (CCTs). Using a fixed-effects model to assess the difference in survival rate (primary outcome), we evaluated the risk difference for immediate implant placement in infected and non-infected sites. We estimated the weighted mean differences (WMDs) of the change in marginal bone loss (MBL), probing depth (PD), modified bleeding index (mBI), marginal gingival level (MGL) and width of keratinized gingiva (WKG) at baseline and latest follow-up. In total, five studies (0 RCT, five CCTs) were included in the systematic review and three studies were included in the meta-analysis. The risk difference for immediate implant placement in an infected extraction socket compared with that in a non-infected socket was -0.02. WMDs for MBL, PD, mBI, MGL and WKG between the two groups were 0.32, 0.12, 0.07, -0.06, 0.20 and 0.51, respectively. No statistical differences were observed between the two groups, except for the change in WKG. Implants can be placed in infected extraction sockets after thorough socket debridement. For aesthetics, WKG should be considered when performing immediate implant placement in infected sites.

  5. Effect of mangosteen peel extract combined with demineralized freezed-dried bovine bone xenograft on osteoblast and osteoclast formation in post tooth extraction socket

    Directory of Open Access Journals (Sweden)

    Utari Kresnoadi

    2016-12-01

    Full Text Available Background: Tooth extraction, a common procedure in dentistry, can cause bone resorption during socket healing. Therefore, it is important to perform socket preservation procedure to maintain alveolar bone. Providing a combination of mangosteen peel extract with demineralized freezed-dried bovine bone xenograft (DFDBBX in tooth extraction socket was expected to accelerate alveol bone formation. Purpose: This study aims to determine the effect of mangosteen peel extract combined with DFDBBX introduced into the socket of post tooth extraction on the formation of osteoblasts and osteoclasts. Method: Twenty-eight (28 Cavia cobayas were divided into four groups. Extraction to the lower left incisor of Cavia cobaya was performed. The extraction socket was filled with 25 gram of PEG (group I as a control, active materials consisted of mangosteen peel extract and DFDBBX 0.5% (group II, active materials consisted of mangosteen peel extract and DFDBBX 1% (group III, and active materials consisted of mangosteen peel extract and DFDBBX 2% (group IV. After thirty days, those Cavia cobayas were sacrificed. By using HE on Histopatological examination, the number of osteoblasts and osteoclasts were measured by light microscope with 400 times of magnification. The statistical analysis was then performed using oneway Anova & TukeyHSD test. Result: The component active materials consisted of mangosteen peel extract and DFDBBX 2% had the most significant results related to the formation of osteoblasts and osteoclasts. Conclusion: Mangosteen peel extract combined with DFDBBX can increase osteoblasts and decrease osteoclasts in the socket of tooth extraction in Cavia cobaya. The combination of mangosteen peel extract and DFDBBX 2% is the most effective material in increasing osteoblast and decreasing osteoclast.

  6. Periodontal and endodontic pathology delays extraction socket healing in a canine model

    Science.gov (United States)

    2017-01-01

    Purpose The aim of the present exploratory study was to evaluate extraction socket healing at sites with a history of periodontal and endodontic pathology. Methods The mandibular 4th premolar teeth in 5 adult beagle dogs served as experimental units. Periodontal and endodontic lesions were induced in 1 premolar site in each animal using wire ligatures and pulpal exposure over 3 months (diseased sites). The contralateral premolar sites served as healthy controls. The mandibular 4th premolar teeth were then extracted with minimal trauma, followed by careful wound debridement. The animals were sacrificed at days 1, 7, 30, 60, and 90 post-extraction for analysis, and the healing patterns at the healthy and diseased extraction sites were compared using radiography, scanning electron microscopy, histology, and histometry. Results During the first 7 days of healing, a significant presence of inflammatory granulation tissue was noted at the diseased sites (day 1), along with a slightly accelerated rate of fibrin clot resolution on day 7. On day 30, the diseased extraction sites showed a greater percentage of persistent fibrous connective tissue, and an absence of bone marrow formation. In contrast, healthy sites showed initial signs of bone marrow formation on day 30, and subsequently a significantly greater proportion of mature bone marrow formation on both days 60 and 90. Radiographs exhibited sclerotic changes adjoining apical endodontic lesions, with scanning electron microscopy showing collapsed Volkmann canals protruding from these regions in the diseased sites. Furthermore, periodontal ligament fibers exhibited a parallel orientation to the alveolar walls of the diseased sites, in contrast to a perpendicular arrangement in the healthy sites. Conclusions Within the limitations of this study, it appears that a history of periodontal and endodontic pathology may critically affect bone formation and maturation, leading to delayed and compromised extraction socket

  7. Effects of caffeic acid phenethyl ester on palatal mucosal defects and tooth extraction sockets

    Science.gov (United States)

    Günay, Ahmet; Arpağ, Osman Fatih; Atilgan, Serhat; Yaman, Ferhan; Atalay, Yusuf; Acikan, İzzet

    2014-01-01

    Aim The purpose of this study was to evaluate the effects of caffeic acid phenethyl ester (CAPE) on palatal mucosal defects and tooth extraction sockets in an experimental model. Materials and methods Forty-two male Sprague-Dawley rats with a mean age of 7 weeks and weighing 280–490 g were used in this study. The rats were randomly divided into two groups: group A (the control group, n=21) and group B (the experimental group, n=21). Under anesthesia with ketamine (8 mg/100 g, intraperitoneally), palatal mucosal defects were created and tooth extraction was performed in the rats in groups A and B. Group A received no treatment, whereas group B received CAPE. CAPE was injected daily (10 μmol/kg, intraperitoneally). The rats were killed on days 7, 14, and 30 after the procedures. Palatal mucosa healing and changes in bone tissue and fibrous tissue were evaluated histopathologically. Result Pairwise comparisons showed no statistically significant difference between days 7 and 14 in either group (P>0.05). At day 30, bone healing was significantly better in group B (CAPE) than in group A (control) (P0.05). Conclusion In conclusion, the findings of this study suggest that CAPE can significantly improve tooth socket healing. PMID:25364232

  8. Effects of caffeic acid phenethyl ester on palatal mucosal defects and tooth extraction sockets

    Directory of Open Access Journals (Sweden)

    Günay A

    2014-10-01

    Full Text Available Ahmet Günay,1 Osman Fatih Arpağ,2 Serhat Atilgan,3 Ferhan Yaman,3 Yusuf Atalay,4 İzzet Acikan3 1Department of Periodontology, Faculty of Dentistry, Dicle University, Diyarbakir, Turkey; 2Department of Periodontology, Faculty of Dentistry, Mustafa Kemal University, Hatay, Turkey; 3Department of Maxillofacial Surgery, Faculty of Dentistry, Dicle University, Diyarbakir, Turkey; 4Department of Maxillofacial Surgery, Faculty of Dentistry, Kocatepe University, Afyon, Turkey Aim: The purpose of this study was to evaluate the effects of caffeic acid phenethyl ester (CAPE on palatal mucosal defects and tooth extraction sockets in an experimental model.Materials and methods: Forty-two male Sprague-Dawley rats with a mean age of 7 weeks and weighing 280–490 g were used in this study. The rats were randomly divided into two groups: group A (the control group, n=21 and group B (the experimental group, n=21. Under anesthesia with ketamine (8 mg/100 g, intraperitoneally, palatal mucosal defects were created and tooth extraction was performed in the rats in groups A and B. Group A received no treatment, whereas group B received CAPE. CAPE was injected daily (10 µmol/kg, intraperitoneally. The rats were killed on days 7, 14, and 30 after the procedures. Palatal mucosa healing and changes in bone tissue and fibrous tissue were evaluated histopathologically.Result: Pairwise comparisons showed no statistically significant difference between days 7 and 14 in either group (P>0.05. At day 30, bone healing was significantly better in group B (CAPE than in group A (control (P<0.05. Fibrinogen levels at day 30 were significantly higher in group A (control than in group B (CAPE (P<0.05. Pairwise comparisons showed no statistically significant difference in palatal mucosa healing levels between days 7 and 14 in both groups (P>0.05.Conclusion: In conclusion, the findings of this study suggest that CAPE can significantly improve tooth socket healing. Keywords: caffeic

  9. Mate tea (Ilex paraguariensis) improves bone formation in the alveolar socket healing after tooth extraction in rats.

    Science.gov (United States)

    Brasilino, Matheus da Silva; Stringhetta-Garcia, Camila Tami; Pereira, Camila Scacco; Pereira, Ariana Aparecida Ferreira; Stringhetta, Karina; Leopoldino, Andréia Machado; Crivelini, Marcelo Macedo; Ervolino, Edilson; Dornelles, Rita Cássia Menegati; de Melo Stevanato Nakamune, Ana Cláudia; Chaves-Neto, Antonio Hernandes

    2018-04-01

    The objective of this study was to investigate the effects of mate tea (MT) [Ilex paraguariensis] on alveolar socket healing after tooth extraction. Sixteen male rats were divided into MT and control groups. MT was administered by intragastric gavage at a dose of 20 mg/kg/day for 28 days before and 28 days after right maxillary incisor extraction. The control group received an equal volume of water. Histopathological and histometric analysis of the neoformed bone area and osteocyte density were performed, as well as immunohistochemical analysis of osteocalcin (OCN), receptor activator of nuclear factor kappa-B ligand (RANKL), osteoprotegerin (OPG), tartrate-resistant acid phosphatase (TRAP), and manganese superoxide dismutase (MnSOD) in the alveolar socket. Calcium, phosphorus, alkaline phosphatase (ALP) activity, total antioxidant capacity (TAC), and malondialdehyde (MDA) were measured in plasma, whereas TRAP activity was determined in serum. Histometry evidenced an increase in bone area (P alveolar socket healing on day 28 after tooth extraction. Regular MT ingestion improves the antioxidant defenses and bone formation, which is beneficial for alveolar socket bone healing after tooth extraction.

  10. Evaluation of Amoxicillin & Cephalexin concentrations in dental alveolar sockets after tooth extraction

    Directory of Open Access Journals (Sweden)

    Fakhraei AH.

    2005-06-01

    Full Text Available Statement of Problem: One of the most important complications after tooth extraction and oral and maxillofacial surgery is transient bacteraemia and prescription of prophylactic antibiotic is necessary to prevent postoperative infections in immunocompromised patients. Purpose: The aim of this study was the evaluation of cephalexin and amoxicillin concentrations in dental alveolar sockets following tooth extraction. Materials and Methods: In this interventional study, 80 healthy patients subjected to tooth extraction were divided into two groups. Each group received 1 gr amoxicillin or cephalexin and teeth were extracted 30-60-90-120-180 minutes after antibiotic intake. Blood sampling was performed immediately after extraction and concentrations of two antibiotics were measured in microbiology laboratory. ANOVA test and Post-hoc (Duncan test were used for statistical analysis with P<0.05 as the limit of significance. Results: The maximum serum concentration was 10.1006 μg/ml for amoxicillin at 120 minutes and 41.5467 μg/ml for cephalexin at 90 minutes after drug intake. The minimum inhibitory concentration (MIC of cephalexin and amoxicillin for Streptococcus sanguis was 2 μg/ml and 1 μg/ml respectively. Conclusion: The mean concentration for amoxicillin was 10 times and for cephalexin was 20 times higher than MIC.

  11. Dry socket

    Science.gov (United States)

    Alveolar osteitis; Alveolitis; Septic socket ... You may be more at risk for dry socket if you: Have poor oral health Have a ... after having a tooth pulled Have had dry socket in the past Drink from a straw after ...

  12. Graphene oxide scaffold accelerates cellular proliferative response and alveolar bone healing of tooth extraction socket.

    Science.gov (United States)

    Nishida, Erika; Miyaji, Hirofumi; Kato, Akihito; Takita, Hiroko; Iwanaga, Toshihiko; Momose, Takehito; Ogawa, Kosuke; Murakami, Shusuke; Sugaya, Tsutomu; Kawanami, Masamitsu

    2016-01-01

    Graphene oxide (GO) consisting of a carbon monolayer has been widely investigated for tissue engineering platforms because of its unique properties. For this study, we fabricated a GO-applied scaffold and assessed the cellular and tissue behaviors in the scaffold. A preclinical test was conducted to ascertain whether the GO scaffold promoted bone induction in dog tooth extraction sockets. For this study, GO scaffolds were prepared by coating the surface of a collagen sponge scaffold with 0.1 and 1 µg/mL GO dispersion. Scaffolds were characterized using scanning electron microscopy (SEM), physical testing, cell seeding, and rat subcutaneous implant testing. Then a GO scaffold was implanted into a dog tooth extraction socket. Histological observations were made at 2 weeks postsurgery. SEM observations show that GO attached to the surface of collagen scaffold struts. The GO scaffold exhibited an interconnected structure resembling that of control subjects. GO application improved the physical strength, enzyme resistance, and adsorption of calcium and proteins. Cytocompatibility tests showed that GO application significantly increased osteoblastic MC3T3-E1 cell proliferation. In addition, an assessment of rat subcutaneous tissue response revealed that implantation of 1 µg/mL GO scaffold stimulated cellular ingrowth behavior, suggesting that the GO scaffold exhibited good biocompatibility. The tissue ingrowth area and DNA contents of 1 µg/mL GO scaffold were, respectively, approximately 2.5-fold and 1.4-fold greater than those of the control. Particularly, the infiltration of ED2-positive (M2) macrophages and blood vessels were prominent in the GO scaffold. Dog bone-formation tests showed that 1 µg/mL GO scaffold implantation enhanced bone formation. New bone formation following GO scaffold implantation was enhanced fivefold compared to that in control subjects. These results suggest that GO was biocompatible and had high bone-formation capability for the scaffold

  13. Healing of extraction sockets filled with BoneCeramic® prior to implant placement: preliminary histological findings.

    Science.gov (United States)

    De Coster, Peter; Browaeys, Hilde; De Bruyn, Hugo

    2011-03-01

    Various grafting materials have been designed to minimize edentulous ridge volume loss following tooth extraction by encouraging new bone formation in healing sockets. BoneCeramic® is a composite of hydroxyapatite and bèta-tricalcium phosphate with pores of 100-500 microns. The aim of this study was to evaluate bone regeneration in healing sockets substituted with BoneCeramic® prior to implant procedures. Fifteen extraction sockets were substituted with BoneCeramic® and 14 sockets were left to heal naturally in 10 patients (mean age 59.6 years). Biopsies were collected only from the implant recipient sites during surgery after healing periods ranging from 6-74 weeks (mean 22). In total, 24 biopsies were available; 10 from substituted and 14 from naturally healed sites. In one site, the implant was not placed intentionally and, in four substituted sites, implant placement had to be postponed due to inappropriate healing, hence from five sites biopsies were not available. Histological sections were examined by transmitted light microscope. At the time of implant surgery, bone at substituted sites was softer than in controls, compromising initial implant stability. New bone formation at substituted sites was consistently poorer than in controls, presenting predominantly loose connective tissue and less woven bone. The use of BoneCeramic® as a grafting material in fresh extraction sockets appears to interfere with normal healing processes of the alveolar bone. On the basis of the present preliminary findings, its indication as a material for bone augmentation, when implant placement is considered within 6-38 weeks after extraction, should be revised. © 2009, Copyright the Authors. Journal Compilation © 2011, Wiley Periodicals, Inc.

  14. Regenerative Needs Following Alveolar Ridge Preservation Procedures in Compromised and Noncompromised Extraction Sockets: A Cone Beam Computed Tomography Study.

    Science.gov (United States)

    Koutouzis, Theofilos; Lipton, David

    2016-01-01

    The aim of this study was to evaluate the necessity for additional regenerative procedures following healing of compromised and noncompromised extraction sockets with alveolar ridge preservation procedures through the use of virtual implant imaging software. The cohort was comprised of 87 consecutive patients subjected to a single maxillary tooth extraction with an alveolar ridge preservation procedure for subsequent implant placement. Patients were divided into two main groups based on the integrity of the buccal bone plate following teeth extraction. Patients in the compromised socket (CS) group (n = 52) had partial or complete buccal bone plate loss, and patients in the noncompromised socket (NCS) group (n = 35) exhibited no bone loss of their socket walls following tooth extraction. Following 4 to 6 months of healing, all patients had a cone beam computed tomography (CBCT) study. Root-formed implants were placed virtually in an ideal prosthetic position. The number of implants per group and location (anterior, premolar, molar) exhibiting exposed buccal implant surface was calculated. In the CS group, 5 out of 19 anterior implants (26.3%), 4 out of 14 premolar implants (28.5%), and 7 out of 19 molar implants (36.8%) had exposed buccal surfaces. In the NCS group, 4 out of 9 anterior implants (44.4%), 2 out of 9 premolar implants (22.2%), and 4 out of 17 molar implants (23.5%) had exposed buccal surfaces. There were no statistically significant differences for intragroup and intergroup comparisons (χ² test, P > .05). This study failed to find statistically significant differences in the frequency of implants with exposed buccal surfaces placed virtually, following treatment of compromised and noncompromised sockets. A high proportion (22% to 44%) of sites had implants that potentially needed additional regenerative procedures.

  15. Anti-resorptive effect of pamidronate on extraction socket wall in dogs.

    Science.gov (United States)

    Cha, Jae-Kook; Sun, Yoo-Kyung; Kim, Myong Ji; Sanz, Mariano; Jung, Ui-Won

    2018-05-12

    The aim of this experimental in vivo investigation was to assess the anti-resorptive effect of low concentration pamidronate on the buccal plate in fresh extraction sockets. The distal roots of the third premolars were extracted bilaterally in six dogs. A collagen matrix loaded with either pamidronate (test group) or saline (control group) was positioned on the outer surface of buccal bone immediately after tooth extraction and subsequently covered with a coronally advanced flap. Histological and histomorphometric outcomes were evaluated 12 weeks later. The mean vertical distance between the buccal and lingual bone crest differed significantly between the test and control groups (0.52 ± 0.43 and 2.21 ± 1.15 mm, respectively; p = .037). The width of the buccal bone 1 mm below the crest was significantly wider in the test group than the control group (4.68 ± 0.68 vs. 3.44 ± 0.60 mm, p < .001). Local application of pamidronate onto a collagen matrix may reduce the dimensional changes of the buccal bone plate both vertically and horizontally. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. Effects of local and whole body irradiation on the appearance of osteoblasts during wound healing in tooth extraction sockets in rats

    International Nuclear Information System (INIS)

    Hosokawa, Yoichiro; Kudo, Kohsei; Kashiwakura, Ikuo; Sakakura, Yasunori; Irie, Kazuharu

    2010-01-01

    Irradiation before tooth extraction delays wound healing in the alveolar socket. This study examined the influences of local and whole body irradiation before tooth extraction on appearance of osteoblasts in the alveolar bone of rat maxillary first molars because bone formation is observed at the initial phase of wound healing. Several osteoblasts were generated 3 days after tooth extraction, and the number of cells increased day by day. Morphological studies showed there were little differences between local irradiation and non-irradiated controls. In contrast, the extraction wound in the whole body irradiation group showed delayed healing, and there was poor granulation tissue and very few osteoblasts at the bottom of the socket. An ultrastructural study showed that the osteoblasts in the extraction socket of whole body irradiation rats were smaller, and had poorly developed organelles. Injection of bone marrow cells to whole body-irradiated animals immediately after tooth extraction partially restored the number of osteoblasts. New periosteal bone formations outside of sockets showed little delay in the whole body irradiation group. These findings suggest that bone formation in the wound healing of extraction socket requires bone marrow cells from hematopoietic organs such as the bone marrow as well as local sources around the alveolar socket, during the initial phase of wound healing. (author)

  17. Effects of local and whole body irradiation on the appearance of osteoblasts during wound healing in tooth extraction sockets in rats.

    Science.gov (United States)

    Hosokawa, Yoichiro; Sakakura, Yasunori; Irie, Kazuharu; Kudo, Kohsei; Kashiwakura, Ikuo

    2010-01-01

    Irradiation before tooth extraction delays wound healing in the alveolar socket. This study examined the influences of local and whole body irradiation before tooth extraction on appearance of osteoblasts in the alveolar bone of rat maxillary first molars because bone formation is observed at the initial phase of wound healing. Several osteoblasts were generated 3 days after tooth extraction, and the number of cells increased day by day. Morphological studies showed there were little differences between local irradiation and non-irradiated controls. In contrast, the extraction wound in the whole body irradiation group showed delayed healing, and there was poor granulation tissue and very few osteoblasts at the bottom of the socket. An ultrastructural study showed that the osteoblasts in the extraction socket of whole body irradiation rats were smaller, and had poorly developed organelles. Injection of bone marrow cells to whole body-irradiated animals immediately after tooth extraction partially restored the number of osteoblasts. New periosteal bone formations outside of sockets showed little delay in the whole body irradiation group. These findings suggest that bone formation in the wound healing of extraction socket requires bone marrow cells from hematopoietic organs such as the bone marrow as well as local sources around the alveolar socket, during the initial phase of wound healing.

  18. Graphene oxide scaffold accelerates cellular proliferative response and alveolar bone healing of tooth extraction socket

    Directory of Open Access Journals (Sweden)

    Nishida E

    2016-05-01

    Full Text Available Erika Nishida,1 Hirofumi Miyaji,1 Akihito Kato,1 Hiroko Takita,2 Toshihiko Iwanaga,3 Takehito Momose,1 Kosuke Ogawa,1 Shusuke Murakami,1 Tsutomu Sugaya,1 Masamitsu Kawanami11Department of Periodontology and Endodontology, Hokkaido University Graduate School of Dental Medicine, Sapporo, Japan; 2Support Section for Education and Research, Hokkaido University Graduate School of Dental Medicine, Sapporo, Japan; 3Laboratory of Histology and Cytology, Hokkaido University Graduate School of Medicine, Sapporo, JapanAbstract: Graphene oxide (GO consisting of a carbon monolayer has been widely investigated for tissue engineering platforms because of its unique properties. For this study, we fabricated a GO-applied scaffold and assessed the cellular and tissue behaviors in the scaffold. A preclinical test was conducted to ascertain whether the GO scaffold promoted bone induction in dog tooth extraction sockets. For this study, GO scaffolds were prepared by coating the surface of a collagen sponge scaffold with 0.1 and 1 µg/mL GO dispersion. Scaffolds were characterized using scanning electron microscopy (SEM, physical testing, cell seeding, and rat subcutaneous implant testing. Then a GO scaffold was implanted into a dog tooth extraction socket. Histological observations were made at 2 weeks postsurgery. SEM observations show that GO attached to the surface of collagen scaffold struts. The GO scaffold exhibited an interconnected structure resembling that of control subjects. GO application improved the physical strength, enzyme resistance, and adsorption of calcium and proteins. Cytocompatibility tests showed that GO application significantly increased osteoblastic MC3T3-E1 cell proliferation. In addition, an assessment of rat subcutaneous tissue response revealed that implantation of 1 µg/mL GO scaffold stimulated cellular ingrowth behavior, suggesting that the GO scaffold exhibited good biocompatibility. The tissue ingrowth area and DNA contents of 1

  19. Experimental study of the microvascular architecture and bone formation when using a carboxymethyl-chitin for bone repair in extracted sockets

    International Nuclear Information System (INIS)

    Kinoshita, Tamotsu; Toda, Isumi; Ehara, Yuji; Nakanishi, Ko; Suwa, Fumihiko

    2011-01-01

    Chitin is an absorbable agent used to promote wound healing and hemostasis, and is also used in medical treatment. We investigated the effects of carboxymethyl-chitin (CM-chitin), a water-soluble derivative of chitin, on bone augmentation. Four maxillary incisors were extracted from 5 adult Crab-eating Macaques, then the extraction sockets on the subjects' right sides were immediately filled with CM-chitin (experimental sites), while the left sides were left unfilled (control). One, two, four, eight, and twelve weeks after the procedure, the animals were euthanized and acrylic resin was injected via the common carotid arteries. Bone-microvascular corrosion casts were made and observed using scanning electron microscopy to determine the volume ratio of newly-formed bone in each socket. After 1 week, newly-formed capillary networks were observed in the sockets of the experimental sites. After 2 weeks, the sockets in both the experimental and control sites were filled with newly-formed capillary networks. After 4 weeks, newly-formed bone was observed in the sockets of both sites and the sockets were also filled with newly-formed bone after 8 weeks. After 12 weeks, trabecular bone was thicker and more compressed than after 8 weeks. Image analysis showed that the volume ratio of newly-formed bone was not significantly different between the experimental and control sites. We concluded that CM-chitin does not obstruct bone augmentation in extracted tooth sockets and is useful to promote angiogenesis in the early stages. (author)

  20. Implant-buccal plate distance as diagnostic parameter: a prospective cohort study on implant placement in fresh extraction sockets.

    Science.gov (United States)

    Capelli, Matteo; Testori, Tiziano; Galli, Fabio; Zuffetti, Francesco; Motroni, Alessandro; Weinstein, Roberto; Del Fabbro, Massimo

    2013-12-01

    The aim of this study is to investigate contour changes around immediate implants in fresh extraction sockets when different grafting procedures are performed, based on the distance between the external implant collar and the bony surface on the buccal plate (I-BP). A secondary aim is to assess the esthetic outcome via the implant esthetic score (IAS). This prospective cohort study was performed in three centers. Suitable patients to undergo implant placement in fresh extraction sockets were selected. Periodontal biotype, horizontal and vertical peri-implant bone defects, and dehiscences were assessed. Depending on I-BP, two types of grafting procedures were performed. In group A (I-BP sockets. No implant failed during the observation period. The mean follow-up was 25 months (range: 12 to 37 months). After 1 year of loading, group A showed a slight decrease in mean buccal volume, whereas group B had an increase in volume (P = 0.02). IAS was higher for group B than group A. When implants are placed immediately after tooth extraction, I-BP may represent a useful diagnostic parameter in choosing the most appropriate grafting procedure (IG versus IEG). In clinical cases in which the distance between implant surface and the buccal plate is <4 mm, the combination of internal and external grafting (IEG) is recommended to maintain the volume and the contour of the ridge and achieve a successful esthetic outcome.

  1. The Use of Light/Chemically Hardened Polymethylmethacrylate, Polyhydroxylethylmethacrylate, and Calcium Hydroxide Graft Material in Combination With Polyanhydride Around Implants and Extraction Sockets in Minipigs: Part II: Histologic and Micro-CT Evaluations

    Science.gov (United States)

    Hasturk, Hatice; Kantarci, Alpdogan; Ghattas, Mazen; Dangaria, Smit J.; Abdallah, Rima; Morgan, Elise F.; Diekwisch, Thomas G.H.; Ashman, Arthur; Van Dyke, Thomas

    2015-01-01

    Background This report is the second part of the previously published study on the impact of light/chemical hardening technology and a newly formulated composite graft material for crestal augmentation during immediate implant placement. Methods A total of 48 implants were placed into the sockets of the mesial roots of freshly extracted mandibular premolar teeth in three minipigs. Crestal areas and intrabony spaces were randomly augmented with light-hardened graft materials including a composite graft consisting of polymethylmethacrylate, polyhydroxylethylmethacrylate, and calcium hydroxide (PPCH) plus polyanhydride (PA); PPCH graft; and PA graft, or left untreated. Distal sockets not receiving implants and the sockets of first molars (n = 60) were randomly treated with one of the graft materials or left empty. In addition, two molar sockets were treated with the original PPCH graft material. Quantitative microcomputed tomography (micro-CT) was used to assess alveolar bone structure and tissue compositions. Histologic evaluations included descriptive histology to assess the peri-implant wound healing, as well as histomorphometric measurements to determine bone-to-implant contact (BIC). Results Both trabecular and cortical bone measurements by micro-CT did not reveal any significant differences among the groups. Sites augmented with PPCH+PA resulted in significantly greater BIC surface than PPCH alone and no-graft-treated implants (P implant surface in the PPCH+PA group, whereas sites without augmentation showed large gaps between bone and implant surfaces, indicating a slower bone apposition and less BIC surface compared to all other groups. Similar to implant sections, all materials showed positive outcome on trabecular and cortical bone formation in extraction sockets with an intact crestal cortical bone. Conclusion Histologic evaluations supported the previous findings on implant stability and function and confirmed that PPCH+PA provides a greater BIC with a

  2. Dental implants inserted in fresh extraction sockets versus healed sites: a systematic review and meta-analysis.

    Science.gov (United States)

    Chrcanovic, Bruno Ramos; Albrektsson, Tomas; Wennerberg, Ann

    2015-01-01

    To test the null hypothesis of no difference in the implant failure rates, postoperative infection and marginal bone loss for the insertion of dental implants in fresh extraction sockets compared to the insertion in healed sites, against the alternative hypothesis of a difference. Main search terms used in combination: dental implant, oral implant, resh extraction socket, immediate placement, immediate insertion, immediate implant. An electronic search was undertaken in July/2014, in PubMed, Web of Science, Cochrane Oral Health Group Trials Register plus hand-searching. Eligibility criteria included clinical human studies, either randomized or not. The search strategy resulted in 73 publications, with 8,241 implants inserted in sockets (330 failures, 4.00%), and 19,410 in healed sites (599 failures, 3.09%). It is suggested that the insertion of implants in fresh extraction sockets affects the failure rates (RR 1.58, 95% CI 1.27-1.95, P<0.0001). The difference was not statistically significant when studies evaluating implants inserted in maxillae or in mandibles were pooled, or when the studies using implants to rehabilitate patients with full-arch prostheses were pooled; however, it was significant for the studies that rehabilitated patients with implant-supported single crowns and for the controlled studies. There was no apparent significant effect on the occurrence of postoperative infection or on the magnitude of marginal bone loss. The results should be interpreted with caution due to the potential for biases and to the presence of uncontrolled confounding factors in the included studies, most of them not randomized. The question whether immediate implants are more at risk for failure than implants placed in mature bone has received increasing attention in the last years. As the philosophies of treatment alter over time, a periodic review of the different concepts is necessary to refine techniques and eliminate unnecessary procedures. This would form a basis

  3. Spirulina chitosan gel induction on healing process of Cavia cobaya post extraction socket

    Directory of Open Access Journals (Sweden)

    Rostiny Rostiny

    2014-03-01

    Full Text Available Background: Prominent residual ridge is necessary to gain retention and stabilility for succesful prosthodontic treatment such as removable, fixed or implant. Spirulina is a natural substance that can help tissue healing and chitosan also a natural substance that reported to have the ability to help bone remodelling. The combination gel of spirulina and chitosan could be considered as an alternative material to maintain residual ridge height after tooth extraction. Purpose: The aim of study was to examine the effect of combination gel of Spirulina and chitosan on healing process of Cavia cobaya post tooth extraction socket by counting the amount of osteoclast, osteoblast and colagen as an indicator. Methods: Twenty eight cavia cobaya were divided into 4 groups. Insisive mandible extraction was done and the sockets were filled with 3% CMCNa for control groups, 3% spirulina chitosan 200 mg for group 1, 6% spirulina chitosan 200 mg for group 2, 12% spirulina chitosan 200 mg for group 3. After 30 days, histopathology examination was done by using microscope to count the amount of osteoclast, osteoblast and collagen. Results: Data was analyzed by using Anova and Tukey HSD. For osteoclast, there was no significant different between every groups, while for osteoblast and collagen there was significant different between groups. The results showed that induction of combination gel spirulina chitosan was able to accumulate collagen fiber and resulting faster wound healing. Conclusion: Combination 12% gel spirulina chitosan 200 mg could be used as an alternative material for better bone remodeling after tooth extraction.Latar belakang: Residual ridge yang prominen sangat dibutuhkan untuk mendapatkan retensi dan stabilitas untuk menunjang keberhasilan perawatan di bidang prostodonsia seperti pada kasus removable, fixed atau implant. Tindakan pencabutan gigi dapat merusak jaringan periodontal, sementum dan tulang alveolar yang mengakibatkan resorbsi ridge

  4. Calcium dynamics in the healing of tooth extraction sockets in mice evaluated using 45Ca-autoradiography and Electron Probe Micro Analysis

    International Nuclear Information System (INIS)

    Tanaka, Takeo

    2006-01-01

    The calcium distribution in tooth extraction sockets of mice was examined using 45-Calcium autoradiography (ARG) and Electron Probe Micro Analysis (EPMA). Mice were divided into 8 groups (n=8) according to the number of days (1, 2, 3, 4, 5, 7, 10, 20 respectively) after extraction. Frozen sections were taken from mice on each experimental day after injection of 45-Calcium (RI). The process of formation of new bone was observed using ARG. An ultimate analysis was performed by EPMA. Histological analysis was performed with toluidine blue- and alizarin red S-staining. In toluidine blue-staining, an osteoblast was found along the socket wall at 4 days and non-calcified periodontal ligament was recognized until 5 days after extraction. In alizarin red S-staining, new bone was recognized separated from the socket wall at 4 days after extraction. 45 Ca-labeling was detected strongly in the periosteum of the mandible, the surface of cement and periodontal ligament in control animals. 45 Ca-labeling was moved from the bottom to the top of the tooth extraction socket during the period from 1 to 5 days after extraction, but in the periodontal ligament lower than in the granulation tissue. 45 Ca-labeling was detected in the socket at 7, 10 and 20 days. At 4 days, calcium phosphate was observed in the central portion of the socket using EPMA. 45 Ca-labeling showed deposition of calcium phosphate for alveolar bone and new bone. These results suggest that the granulation tissue may be involved in the initial calcification in the tooth extraction socket and lead to the formation of new bone in it. (author)

  5. The use of light/chemically hardened polymethylmethacrylate, polyhydroxylethylmethacrylate, and calcium hydroxide graft material in combination with polyanhydride around implants and extraction sockets in minipigs: Part II: histologic and micro-CT evaluations.

    Science.gov (United States)

    Hasturk, Hatice; Kantarci, Alpdogan; Ghattas, Mazen; Dangaria, Smit J; Abdallah, Rima; Morgan, Elise F; Diekwisch, Thomas G H; Ashman, Arthur; Van Dyke, Thomas

    2014-09-01

    This report is the second part of the previously published study on the impact of light/chemical hardening technology and a newly formulated composite graft material for crestal augmentation during immediate implant placement. A total of 48 implants were placed into the sockets of the mesial roots of freshly extracted mandibular premolar teeth in three minipigs. Crestal areas and intrabony spaces were randomly augmented with light-hardened graft materials including a composite graft consisting of polymethylmethacrylate, polyhydroxylethylmethacrylate, and calcium hydroxide (PPCH) plus polyanhydride (PA); PPCH graft; and PA graft, or left untreated. Distal sockets not receiving implants and the sockets of first molars (n = 60) were randomly treated with one of the graft materials or left empty. In addition, two molar sockets were treated with the original PPCH graft material. Quantitative microcomputed tomography (micro-CT) was used to assess alveolar bone structure and tissue compositions. Histologic evaluations included descriptive histology to assess the peri-implant wound healing, as well as histomorphometric measurements to determine bone-to-implant contact (BIC). Both trabecular and cortical bone measurements by micro-CT did not reveal any significant differences among the groups. Sites augmented with PPCH+PA resulted in significantly greater BIC surface than PPCH alone and no-graft-treated implants (P sockets with an intact crestal cortical bone. Histologic evaluations supported the previous findings on implant stability and function and confirmed that PPCH+PA provides a greater BIC with a well-organized implant-bone interface and is useful in crestal augmentation during immediate implant placement.

  6. Bone Healing in Extraction Sockets Covered With Collagen Membrane Alone or Associated With Porcine-Derived Bone Graft: a Comparative Histological and Histomorphometric Analysis.

    Science.gov (United States)

    Guarnieri, Renzo; Testarelli, Luca; Stefanelli, Luigi; De Angelis, Francesca; Mencio, Francesca; Pompa, Giorgio; Di Carlo, Stefano

    2017-01-01

    The present paper reports data of a randomized study aimed to analyse and compare the histologic and histomorphometric aspects of bone healing in extraction sites covered with collagen membrane alone or associated with porcine-derived bone graft. Thirty patients, with single extraction sockets without severe bone wall defects in the premolar/molar region, were included. Ten extraction sockets were grafted with porcine-derived bone and covered with collagen membrane (group 1), 10 sites were covered with collagen membrane alone (group 2), and 10 sites healed spontaneously (group 3). After 4 months of healing, 26 (8 in group 1, 9 in group 2, and 9 in group 3) bone core specimens were harvested for histologic evaluation, then dental implants were placed. Sites in the group 1 and in the group 2 showed similar histologic and histomorphometric results without significantly differences in the percentage of vital bone (57.43% [SD 4.8] vs. 60.01% [SD 3.2]), and non-mineralized connective tissue 22.99% (SD 5.3) vs. 18.53% (SD 6.2). In group 1 a 16.57% (SD 3.8) of residual material was found. Results showed that the use of collagen membrane alone or associated to porcine-derived bone improves the healing bone process compared to that of extraction sites spontaneously healed. Moreover, histomorphometric data related to bone quality, indicated that extraction sites without severe walls defects and with a vestibular bone thickness > 1.5 mm, treated with a low resorbtion rate collagen membrane alone, do not need more than 4 months for dental implant insertion.

  7. The Use of Tooth Particles as a Biomaterial in Post-Extraction Sockets. Experimental Study in Dogs.

    Science.gov (United States)

    Calvo-Guirado, José Luis; Maté-Sánchez de Val, José Eduardo; Ramos-Oltra, María Luisa; Pérez-Albacete Martínez, Carlos; Ramírez-Fernández, María Piedad; Maiquez-Gosálvez, Manuel; Gehrke, Sergio A; Fernández-Domínguez, Manuel; Romanos, Georgios E; Delgado-Ruiz, Rafael Arcesio

    2018-05-06

    Objectives : The objective of this study was to evaluate new bone formation derived from freshly crushed extracted teeth, grafted immediately in post-extraction sites in an animal model, compared with sites without graft filling, evaluated at 30 and 90 days. Material and Methods : The bilateral premolars P2, P3, P4 and the first mandibular molar were extracted atraumatically from six Beagle dogs. The clean, dry teeth were ground immediately using the Smart Dentin Grinder. The tooth particles obtained were subsequently sieved through a special sorting filter into two compartments; the upper container isolating particles over 1200 μm, the lower container isolated particles over 300 μm. The crushed teeth were grafted into the post-extraction sockets at P3, P4 and M1 (test group) (larger and smaller post-extraction alveoli), while P2 sites were left unfilled and acted as a control group. Tissue healing and bone formation were evaluated by histological and histomorphometric analysis after 30 and 90 days. Results : At 30 days, test site bone formation was greater in the test group than the control group ( p socket preservation.

  8. Effects of local and whole body irradiation on appearance of osteoclasts during wound healing of tooth extraction sockets in rats

    International Nuclear Information System (INIS)

    Hosokawa, Yoichiro; Sakakura, Yasunori; Tanaka, Likinobu; Okumura, Kazuhiko; Yajima, Toshihiko; Kaneko, Masayuki

    2007-01-01

    We examined effects of local and whole body irradiation before tooth extraction on appearance and differentiation of osteoclasts in the alveolar bone of rat maxillary first molars. Wistar rats weighting 100 g were divided into three groups: non-irradiation group, local irradiation group, and whole body irradiation group. In the local irradiation group, a field made with lead blocks was placed over the maxillary left first molar tooth. In the whole body irradiation group, the animals were irradiated in cages. Both groups were irradiated at 8 Gy. The number of osteoclasts around the interradicular alveolar bone showed chronological changes common to non-irradiated and irradiated animals. Several osteoclasts appeared one day after tooth extraction, and the maximal peak was observed 3 days after extraction. Local irradiation had no difference from non-irradiated controls. In animals receiving whole body irradiation, tooth extraction one day after irradiation caused smaller number of osteoclasts than that 7 day after irradiation during the experimental period. Whole body-irradiated rats had small osteoclasts with only a few nuclei and narrow resorption lacunae, indicating deficiency of radioresistant osteoclast precursor cells. Injection of intact bone marrow cells to whole body-irradiated animals immediately after tooth extraction recovered to some content the number of osteoclasts. These findings suggest that bone resorption in the wound healing of alveolar socket requires radioresistant, postmitotic osteoclast precursor cells from hematopoietic organs, but not from local sources around the alveolar socket, at the initial phase of wound healing. (author)

  9. Effects of local and whole body irradiation on appearance of osteoclasts during wound healing of tooth extraction sockets in rats.

    Science.gov (United States)

    Hosokawa, Yoichiro; Sakakura, Yasunori; Tanaka, Likinobu; Okumura, Kazuhiko; Yajima, Toshihiko; Kaneko, Masayuki

    2007-07-01

    We examined effects of local and whole body irradiation before tooth extraction on appearance and differentiation of osteoclasts in the alveolar bone of rat maxillary first molars. Wistar rats weighting 100 g were divided into three groups: non-irradiation group, local irradiation group, and whole body irradiation group. In the local irradiation group, a field made with lead blocks was placed over the maxillary left first molar tooth. In the whole body irradiation group, the animals were irradiated in cages. Both groups were irradiated at 8 Gy. The number of osteoclasts around the interradicular alveolar bone showed chronological changes common to non-irradiated and irradiated animals. Several osteoclasts appeared one day after tooth extraction, and the maximal peak was observed 3 days after extraction. Local irradiation had no difference from non-irradiated controls. In animals receiving whole body irradiation, tooth extraction one day after irradiation caused smaller number of osteoclasts than that 7 day after irradiation during the experimental period. Whole body-irradiated rats had small osteoclasts with only a few nuclei and narrow resorption lacunae, indicating deficiency of radioresistant osteoclast precursor cells. Injection of intact bone marrow cells to whole body-irradiated animals immediately after tooth extraction recovered to some content the number of osteoclasts. These findings suggest that bone resorption in the wound healing of alveolar socket requires radioresistant, postmitotic osteoclast precursor cells from hematopoietic organs, but not from local sources around the alveolar socket, at the initial phase of wound healing.

  10. A new procedure for processing extracted teeth for immediate grafting in post-extraction sockets. An experimental study in American Fox Hound dogs.

    Science.gov (United States)

    Calvo-Guirado, José Luis; Cegarra Del Pino, Pilar; Sapoznikov, Lari; Delgado Ruiz, Rafael Arcesio; Fernández-Domínguez, Manuel; Gehrke, Sérgio Alexandre

    2018-05-01

    To investigate freshly extracted dental particulate used to graft post-extraction sockets in dogs, comparing new bone formation at experimental and control sites. Bilateral premolars P2, P3, P4 and first mandibular molars were extracted atraumatically from six American Fox Hound dogs. The teeth were ground immediately using a 'Smart Dentin Grinder'. The dentin particulate was sieved to ensure a grain size of 300-1200μm and immersed in an alcohol cleanser to dissolve organic debris and bacteria, followed by washing in sterile saline buffer solution. The animals were divided into two groups randomly: group 'A' (control) samples were left to heal without any extraction socket grafting procedure; group 'B' (experimental) sockets were filled with the autogenous dentin particulate graft. The rate of tissue healing and the quantity of bone formation were evaluated using histological and histomorphometric analyses at 60 and 90 days post-grafting. The type of bone generated was categorized as woven (immature bone) or lamellar bone (mature bone). Substantially more bone formation was found in Group B (experimental) than Group A (control) at 60 and 90 days (psocket preservation, protecting both buccal and lingual plates, generating large amounts of new woven bone formation after 60 days, and small amounts of lamellar bone after 90 days healing. Copyright © 2018 Elsevier GmbH. All rights reserved.

  11. Early Loading of Fluoridated Implants Placed in Fresh Extraction Sockets and Healed Bone: A 3- to 5-Year Clinical and Radiographic Follow-Up Study of 39 Consecutive Patients.

    Science.gov (United States)

    Oxby, Gert; Oxby, Fredrik; Oxby, Johan; Saltvik, Tomas; Nilsson, Peter

    2015-10-01

    Immediate placement of implants in extraction sockets for early loading is an attractive treatment modality due to reduced treatment time. However, the outcome of fluoridated implants in this situation with regard to bone levels and health of soft tissues is not well documented. To evaluate the outcome of early loading of OsseoSpeed(™) dental implants placed into fresh extraction sockets and healed bone in consecutive patients treated in a private clinic. A total of 182 OsseoSpeed(™) implants (Astra Tech Implant System, DENTSPLY Implants, Mölndal, Sweden), 72 in immediate extraction sockets and 110 in healed sites, were placed in 39 consecutive patients. The implants were loaded with permanent restorations within 60 days (average 31 days). Clinical and radiographic follow-up examinations were performed annually for at least 3 years (mean 55 months). An aesthetic index was used to evaluate the soft tissues adjacent to the prosthetic restorations. No implant was lost during the observation period, giving a survival rate of 100%. Bone level changes during the observation period were minimal, with a mean marginal bone loss of 0.3 ± 0.9 mm around the delayed implants and a mean marginal bone gain of 0.3 ± 1.4 mm around the immediate implants (p = .0036). The frequency distribution of bone level revealed that 85% of implants placed in fresh extraction sockets and 84% of implants in healed bone did not show any loss of bone level during follow-up (p = NS). Soft tissue complications were observed at two immediate implant sites in one patient. The remaining 180 implants received the highest aesthetic score. Moreover, no signs of peri-implant purulent infection or aggressive bone loss were found during the follow-up period. Early loading of fluoridated implants with permanent constructions appears to be a viable therapy for implants placed immediately in extraction sites and in healed bone. © 2014 Wiley Periodicals, Inc.

  12. High-Frequency, Low-Intensity Pulsed Ultrasound Enhances Alveolar Bone Healing of Extraction Sockets in Rats: A Pilot Study.

    Science.gov (United States)

    Kang, Kyung Lhi; Kim, Eun-Cheol; Park, Joon Bong; Heo, Jung Sun; Choi, Yumi

    2016-02-01

    Most studies of the beneficial effects of low-intensity pulsed ultrasound (LIPUS) on bone healing have used frequencies between 1.0 and 1.5 MHz. However, after consideration of ultrasound wave characteristics and depth of target tissue, higher-frequency LIPUS may have been more effective on superficially positioned alveolar bone. We investigated this hypothesis by applying LIPUS (frequency, 3.0 MHz; intensity, 30 mW/cm(2)) on shaved right cheeks over alveolar bones of tooth extraction sockets in rats for 10 min/d for 2 wk after tooth extraction; the control group (left cheek of the same rats) did not receive LIPUS treatment. Compared with the control group, the LIPUS group manifested more new bone growth inside the sockets on histomorphometric analysis (maximal difference = 2.5-fold on the seventh day after extraction) and higher expressions of osteogenesis-related mRNAs and proteins than the control group did. These findings indicate that 3.0-MHz LIPUS could enhance alveolar bone formation and calcification in rats. Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

  13. Sodium hyaluronate accelerates the healing process in tooth sockets of rats.

    Science.gov (United States)

    Mendes, Renato M; Silva, Gerluza A B; Lima, Miguel F; Calliari, Marcelo V; Almeida, Alvair P; Alves, José B; Ferreira, Anderson J

    2008-12-01

    In this study we evaluated the effects of sodium hyaluronate (HY) in the healing process of tooth sockets of rats. Immediately after the extraction of the upper first molars of male Holtzman rats, right sockets were treated with 1% HY gel (approximately 0.1 ml), while left sockets were used as control (blood clot). The animals were sacrificed at 2, 7, and 21 days after tooth extraction and upper maxillaries processed for histological and morphometric analysis of the apical and medium thirds of the sockets. Carbopol, an inert gel, was used to evaluate the mechanical effect of gel injection into sockets. Expression of bone morphogenetic protein-2 (BMP-2) and osteopontin (OPN) was determined by immunohistochemistry at 1, 2, 3, 4, 5, and 7 days after tooth extraction. Histological analysis showed that HY treatment induced earlier trabecular bone deposition resulting in a bone matrix more organized at 7 and 21 days after tooth extraction. Also, HY elicited significant increase in the amount of bone trabeculaes at 7 and 21 days after tooth extraction (percentage of trabecular bone area at 7 days: 13.21+/-4.66% vs. 2.58+/-1.36% in the apical third of control sockets) and in the vessels counting at 7 days. Conversely, the number of cell nuclei was decreased in HY-treated sockets. Additionally, expression of BMP-2 and OPN was enhanced in HY-treated sockets compared with control sockets. These findings suggest that HY accelerates the healing process in tooth sockets of rats stimulating the expression of osteogenic proteins.

  14. Evaluation of peri-implant crevicular fluid prostaglandin E2 levels in augmented extraction sockets by different biomaterials.

    Science.gov (United States)

    Alkan, Eylem Ayhan; Tüter, Gülay; Parlar, Ateş; Yücel, Ayşegül; Kurtiş, Bülent

    2016-10-01

    This study compares peri-implant crevicular fluid (PICF) prostaglandin E 2 (PGE 2 ) levels, clinical parameters and implant stability quotient (ISQ) values around implants placed in augmented extraction sockets. The sockets (24 in total) were randomly augmented using either EMD or Bio-Oss Collagen. Implant placements were performed after three months of healing. ISQ readings were evaluated at three points: at the time of surgery, at the first month and at the third month. PICF was collected for PGE 2 evaluation after the first and the third months of implant surgery. After the first month, a higher level of PICF PGE 2 was observed in the EMD group than in the Bio-Oss Collagen group, and this increase was of statistical significance; however, at the third month there was no statistically significant difference in PICF PGE 2 levels between the two groups. For implants placed in EMD sites, ISQ values were statistically higher at the third month than at the first month, while no significant differences in ISQ value were detected between the first and third months in Bio-Oss Collagen sites. The results of this research suggest that both EMD and Bio-Oss Collagen are effective treatment modalities for stimulating the formation of new bone at extraction sites prior to implant surgery.

  15. Immediate implants in extraction sockets with periapical lesions: an illustrated review

    Directory of Open Access Journals (Sweden)

    Arthur B. Novaes Jr.

    2013-10-01

    Full Text Available Aim Immediate implantation has gained great attention since first proposed. Immediate implants in replacement of teeth with periapical lesion is, to date, an issue of discussion. The aim of this study is to perform an illustrated literature review of immediate implants in sockets exhibiting previous periapical lesions.Materials and methods A search on medline/EMBASE database was done for the literature review which is presented together with two case reports illustrating the state of the art of immediate implants on sockets with periapical lesions. Both cases are presented in areas with great aesthetic demands and a periapical lesion of considerable size. The two cases were conducted following strict granulation tissue removal and careful rinsing and pre-operative antibiotics, followed by good primary stability of the dental implant.Results and conclusion Both cases represented successes in aesthetics and function, describing a successful protocol for immediate implant installation in areas exhibiting periapical lesions.

  16. Immediate provisional restoration of an implant placed in a fresh primary maxillary canine extraction socket: a case report.

    Science.gov (United States)

    Turkyilmaz, Ilser; Shapiro, Vladimir

    2011-01-01

    This study describes a clinical case in which a primary maxillary canine with both mobility and root resorption was replaced with an immediately restored dental implant placed into the fresh extraction socket. The implant achieved high primary stability, as determined by resonance frequency analysis, and it was immediately restored with a provisional acrylic resin crown with no centric occlusion. An all-ceramic permanent crown replaced the provisonal crown four months after implant surgery. The implant was stable and no periapical radiolucencies, bleeding on probing, or pathologic probing depth were recorded after one year. The peri-implant soft tissue level appeared stable, and the interdental papillae were preserved, contributing to an optimum final esthetic result. This case supports the use of single implants for the replacement of extracted primary teeth, especially in areas where esthetics is a high priority. The immediate provisional crown maintained soft tissue contours and papillary height.

  17. Clinical use of the resorbable bioscaffold poly lactic co-glycolic acid (PLGA) in post-extraction socket for maintaining the alveolar height: A prospective study.

    Science.gov (United States)

    Hoda, Nadeemul; Saifi, Aamir Malick; Giraddi, Girish B

    2016-01-01

    A common sequel of tooth extraction is alveolar bone resorption. It makes the placement of dental implants difficult and creates an esthetic problem for the fabrication of conventional prostheses. Therefore, alveolar bone following tooth extraction should be preserved. The present prospective study was conducted to evaluate the efficacy of the resorbable bioscaffold poly lactic co-glycolic acid (PLGA) in maintaining the alveolar height in post-extraction socket. 20 patients were selected based on inclusion and exclusion criteria and were randomly divided into two groups: cases and control comprising of 10 patients each. Atraumatic tooth extraction was done in all patients. PLGA bioscaffold was placed in cases and socket was closed with 3-0 vicryl. In control group, socket was directly closed with 3-0 vicryl. The patients were kept on follow-up and complications such as dry socket, pain, and swelling were recorded. IOPA were taken at 1st, 4th, 12th, and 24th week to record changes in the height of alveolar bone. The radiographic measurements were compared and the differences were statistically analyzed. Reduction in alveolar bone height after placement of PLGA bioscaffold was significantly less in cases as compared to controls at 4th, 12th, and 24th week following extraction. No complications were observed throughout the follow-up period. PLGA scaffold significantly reduces bone resorption. Application is very simple and can be easily performed in a dental setup. However, PLGA scaffold adds significantly to the cost of treatment.

  18. Transforming growth factor beta 1 expression and inflammatory cells in tooth extraction socket after X-ray irradiation

    Directory of Open Access Journals (Sweden)

    Ramadhan Hardani Putra

    2016-06-01

    Full Text Available Background: Radiographic examination is often used in dentistry to evaluate tooth extraction complications. X-ray used in radiographic examination, however, has negative effects, including damage to DNA and inflammatory response during wound healing process. Purpose: This study aimed to analyze the effects of X-ray irradiation on transforming growth factor beta 1 (TGF-ß1 expression and number of inflammatory cells in tooth extraction sockets. Method: Thirty rats were divided into three groups, which consist of control group (with a radiation of 0 mSv, treatment group 1 (with a radiation of 0.08 mSv, and treatment group 2 (with a radiation of 0.16 mSv. These rats in each group were sacrificed on days 3 and 5 after treatment. Inflammatory cells which were observed in this research were PMN, macrophages, and lymphocytes. Histopathological and immunohistochemical examinations were used to calculate the number of inflammatory cells and TGF-ß1 expression. Obtained data were analyzed using SPSS 16.0 software with one way ANOVA and Tukey’s HSD tests. Result: There was no significant decrease in the number of PMN. On the other hand, there were significant decreases in the number of macrophages and lymphocytes in the sacrificed group on day-5 with the radiation of 0.16 mSv. Similarly, the most significant decreased expression of TGF-ß1 was found in the group sacrificed on day 5 with the radiation of 0.16 mSv. Conclusion: X-ray irradiation with 0.08 mSv and 0.16 mSv doses can decrease TGF-ß1 expression and number of inflammatory cells in tooth extraction sockets on day 3 and 5 post extraction.

  19. Retrospective Analysis of the Outcome of Ridge Preservation with Anorganic Bovine Bone Minerals: Microcomputed Tomographic Assessment of Wound Healing in Grafted Extraction Sockets.

    Science.gov (United States)

    Bakhshalian, Neema; Freire, Marcelo; Min, Seiko; Wu, Ivy; Zadeh, Homayoun H

    A total of 68 extraction sockets were grafted with anorganic bovine bone mineral and covered by dense polytetrafluoroethylene membrane. Quantitative analysis of three-dimensional microcomputed tomography imaging of core samples retrieved after a mean of 21.0 ± 14.2 weeks revealed 40.1% bone volume fraction (bone volume [BV]/total volume [TV]) and 12% residual graft. Evidence of de novo bone formation was observed in the form of discrete islands of newly formed bone in direct apposition to graft particles, separated from parent bone. Anterior sockets exhibited a significantly higher percentage of residual graft compared to premolar sockets (P = .05). The BV/TV and percentage of residual graft correlated well with histomorphometric analysis of the same sites, but not with implant outcomes.

  20. Ridge preservation of extraction sockets with chronic pathology using Bio-Oss® Collagen with or without collagen membrane: an experimental study in dogs.

    Science.gov (United States)

    Kim, Jung-Ju; Schwarz, Frank; Song, Hyun Young; Choi, YoonMi; Kang, Kyung-Rim; Koo, Ki-Tae

    2017-06-01

    This study aimed to evaluate the dynamics of newly bone formation and dimensional change in diseased extraction sockets using Bio-Oss ® Collagen with or without a collagen membrane. In six beagle dogs, right and left 3rd and 4th mandibular premolars were hemisected and the distal roots were removed. Combined endodontic-periodontic lesions were induced in all sites using black silk, collagen sponge, endodontic files, and application of Porphyromonas gingivalis. After 4 months, among 4 premolars, three teeth were randomly selected per dog and allocated to the following experimental groups: Control group (no treatment but debridement), Test 1 group (only Bio-Oss ® Collagen graft), and Test 2 group (Bio-Oss ® Collagen graft with a collagen membrane). After 7 months from the baseline, the beagle dogs were sacrificed for histomorphometric and Micro-CT analysis. The vertical distance between buccal and lingual crests in the Control group (2.22 ± 0.26 mm) and Test 2 group (1.80 ± 0.16 mm) was significantly different. The socket of the Test 2 group (27.04 ± 5.25%) was occupied by a greater quantity of bone graft compared to the Test 1 group (18.49 ± 2.11%). Ridge preservation in diseased extraction sockets could compensate for buccal bone resorption by contact osteogenesis surrounding the bone graft particles at the bucco-coronal area during socket healing, and the application of a collagen membrane at the entrance of the socket is useful for preserving graft material at the coronal part of the socket. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  1. Influence of surgical and prosthetic techniques on marginal bone loss around titanium implants. Part I: immediate loading in fresh extraction sockets.

    Science.gov (United States)

    Berberi, Antoine N; Tehini, Georges E; Noujeim, Ziad F; Khairallah, Alexandre A; Abousehlib, Moustafa N; Salameh, Ziad A

    2014-10-01

    Delayed placement of implant abutments has been associated with peri-implant marginal bone loss; however, long-term results obtained by modifying surgical and prosthetic techniques after implant placement are still lacking. This study aimed to evaluate the marginal bone loss around titanium implants placed in fresh extraction sockets using two loading protocols after a 5-year follow-up period. A total of 36 patients received 40 titanium implants (Astra Tech) intended for single-tooth replacement. Implants were immediately placed into fresh extraction sockets using either a one-stage (immediate loading by placing an interim prosthesis into functional occlusion) or a two-stage prosthetic loading protocol (insertion of abutments after 8 weeks of healing time). Marginal bone levels relative to the implant reference point were evaluated at four time intervals using intraoral radiographs: at time of implant placement, and 1, 3, and 5 years after implant placement. Measurements were obtained from mesial and distal surfaces of each implant (α = 0.05). One-stage immediate implant placement into fresh extraction sockets resulted in a significant reduction in marginal bone loss (p sockets reduced marginal bone loss and did not compromise the success rate of the restorations. © 2014 by the American College of Prosthodontists.

  2. The influence of bone graft procedures on primary stability and bone change of implants placed in fresh extraction sockets.

    Science.gov (United States)

    Jun, Sang Ho; Park, Chang-Joo; Hwang, Suk-Hyun; Lee, Youn Ki; Zhou, Cong; Jang, Hyon-Seok; Ryu, Jae-Jun

    2018-12-01

    This study was to evaluate the effect of bone graft procedure on the primary stability of implants installed in fresh sockets and assess the vertical alteration of peri-implant bone radiographically. Twenty-three implants were inserted in 18 patients immediately after tooth extraction. The horizontal gap between the implant and bony walls of the extraction socket was grafted with xenografts. The implant stability before and after graft procedure was measured by Osstell Mentor as implant stability quotient before bone graft (ISQ bbg) and implant stability quotient after bone graft (ISQ abg). Peri-apical radiographs were taken to measure peri-implant bone change immediately after implant surgery and 12 months after implant placement. Data were analyzed by independent t test; the relationships between stability parameters (insertion torque value (ITV), ISQ abg, and ISQ bbg) and peri-implant bone changes were analyzed according to Pearson correlation coefficients. The increase of ISQ in low primary stability group (LPSG) was 6.87 ± 3.62, which was significantly higher than the increase in high primary stability group (HPSG). A significant correlation between ITV and ISQ bbg ( R  = 0.606, P  = 0.002) was found; however, age and peri-implant bone change were not found significantly related to implant stability parameters. It was presented that there were no significant peri-implant bone changes at 1 year after bone graft surgery. Bone graft procedure is beneficial for increasing the primary stability of immediately placed implants, especially when the ISQ of implants is below 65 and that bone grafts have some effects on peri-implant bone maintenance.

  3. Clinical Outcome After 8 to 10 Years of Immediately Restored Single Implants Placed in Extraction Sockets and Healed Ridges.

    Science.gov (United States)

    Raes, Stefanie; Cosyn, Jan; Noyelle, Anabel; Raes, Filiep; De Bruyn, Hugo

    Recent systematic reviews point to the scarcity of single implants followed up longer than 5 years, and the incidence of biologic/technical complications is underreported. This prospective follow-up study documents 8- to 10-year clinical outcomes of immediately restored single implants in extraction sockets (immediate implant treatment [IIT]) and healed bone (conventional implant treatment [CIT]). Patients received a single, chemically modified, moderately rough titanium implant and a provisional crown on the day of surgery in the anterior maxilla (second premolar to second premolar). Provisional crowns were replaced by permanent crowns after 10 weeks. Implant survival, complications, crestal bone changes, plaque score, probing depth, and bleeding on probing were regularly recorded up to 10 years of follow-up. Of 16 patients who underwent IIT, 11 could be evaluated after 8 years. Of the 23 patients who received an implant in healed bone, 18 were finally evaluated. One implant failed in the IIT group at 12 weeks; all implants survived in the CIT group; 38% of the patients experienced at least one complication; 10% had one or more biologic complications, whereas 31% experienced one or more technical complications. There were no significant changes in crestal bone level from 1 to ≥ 8 years of follow-up for either group or between IIT and CIT at any time point (P ≥ .129). Only 6.9% (2 of 29) implants demonstrated progressive bone loss > 2 mm combined with pockets ≥ 6 mm. Immediately restored single implants in extraction sockets and healed ridges demonstrate good long-term outcomes in terms of implant survival, crestal bone loss, and peri-implant health. However, biologic and especially technical complications are common.

  4. Bone Ceramic® at Implants Installed Immediately into Extraction Sockets in the Molar Region: An Experimental Study in Dogs.

    Science.gov (United States)

    Pereira, Flávia Priscila; Hochuli-Vieira, Eduardo; Maté Sánchez de Val, José E; De Santis, Enzo; Salata, Luiz Antonio; Botticelli, Daniele

    2016-04-01

    The aim of this paper was to study the healing of 1-1.4 mm wide buccal defects at implants placed immediately into extraction sockets (IPIES) filled with a mixture of synthetic hydroxyapatite (HA) 60% and beta-tricalciumphosphate (TCP) 40% or left with the clot alone and both covered with collagen membranes. Eight Labrador dogs were used and implants were placed immediately into the extraction sockets of the first molar bilaterally. A mixture of synthetic HA 60% and beta-TCP 40% at the test or the clot alone at the control sites were used to fill the defects. All surgical sites were subsequently covered by a resorbable collagen membrane and a non-submerged healing was allowed. After 4 months, the animals were euthanized, biopsies harvested and processed for histomorphometric analysis. At the time of installation, residual buccal defects occurred that were 1.1 mm and 1.4 mm wide and 3 mm and 4 mm deep at the control and test sites, respectively. After 4 months of healing, the top of the bony crest and the coronal level of osseointegration were located respectively at 0.1 ± 1.8 mm and 1.5 ± 1.8 mm at the test, and 0.6 ± 1.6 mm and 1.2 ± 0.7 mm at the control sites apically to the implant shoulder. Bone-to-implant contact at the buccal aspect was 34.9 ± 25.9% and 36.4 ± 17.3% at the test and control sites, respectively. No statistically significant differences were found between test and control sites for any of the variables analyzed at the buccal aspects. The use of a mixture of synthetic HA 60% and beta-TCP 40% to fill residual buccal defects 1-1.4 mm wide at IPIES did not improve significantly the results of healing. © 2015 Wiley Periodicals, Inc.

  5. A 5-year comparison of marginal bone level following immediate loading of single-tooth implants placed in healed alveolar ridges and extraction sockets in the maxilla.

    Science.gov (United States)

    Berberi, Antoine N; Sabbagh, Joseph M; Aboushelib, Moustafa N; Noujeim, Ziad F; Salameh, Ziad A

    2014-01-01

    The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol. Thirty-six patients in need of a single-tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden). Implants were placed either in healed ridges (group I) or immediately into fresh extraction sockets (group II). Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36, and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implant. Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study. The mean change in marginal bone loss (MBL) after implant placement was 0.26 ± 0.161 mm for 1 year, and 0.26 ± 0.171 mm for 3 years, and 0.21 ± 0.185 mm for 5 years in extraction sockets and was 0.26 ± 0.176 mm for 1 year and 0.21 ± 0.175 mm for 3 years, and 0.19 ± 0.172 mm for 5 years in healed ridges group. Significant reduction of marginal bone was more pronounced in implants inserted in healed ridges (P sockets (P sockets or healed ridges were similar. Functional loading technique by using prefabricated abutment placed during the surgery time seems to maintain marginal bone around implant in both healed and fresh extraction sites.

  6. A Novel HA/β-TCP-Collagen Composite Enhanced New Bone Formation for Dental Extraction Socket Preservation in Beagle Dogs

    Directory of Open Access Journals (Sweden)

    Ko-Ning Ho

    2016-03-01

    Full Text Available Past studies in humans have demonstrated horizontal and vertical bone loss after six months following tooth extraction. Many biomaterials have been developed to preserve bone volume after tooth extraction. Type I collagen serves as an excellent delivery system for growth factors and promotes angiogenesis. Calcium phosphate ceramics have also been investigated because their mineral chemistry resembles human bone. The aim of this study was to compare the performance of a novel bioresorbable purified fibrillar collagen and hydroxyapatite/β-tricalcium phosphate (HA/β-TCP ceramic composite versus collagen alone and a bovine xenograft-collagen composite in beagles. Collagen plugs, bovine graft-collagen composite and HA/β-TCP-collagen composite were implanted into the left and right first, second and third mandibular premolars, and the fourth molar was left empty for natural healing. In total, 20 male beagle dogs were used, and quantitative and histological analyses of the extraction ridge was done. The smallest width reduction was 19.09% ± 8.81% with the HA/β-TCP-collagen composite at Week 8, accompanied by new bone formation at Weeks 4 and 8. The HA/β-TCP-collagen composite performed well, as a new osteoconductive and biomimetic composite biomaterial, for socket bone preservation after tooth extraction.

  7. Effects of platelet-poor plasma, platelet-rich plasma, and platelet-rich fibrin on healing of extraction sockets with buccal dehiscence in dogs.

    Science.gov (United States)

    Hatakeyama, Ichiro; Marukawa, Eriko; Takahashi, Yukinobu; Omura, Ken

    2014-02-01

    Alveolar bone resorption generally occurs during healing after tooth extraction. This study aimed to evaluate the effects of platelet-poor plasma (PPP), platelet-rich plasma (PRP), and platelet-rich fibrin (PRF) on healing in a ridge-augmentation model of the canine socket with dehiscence of the buccal wall. The third mandibular premolars of 12 beagle dogs were extracted and a 3 mm buccal dehiscence from the alveolar crest to the buccal wall of the extraction socket was created. These sockets were then divided into four groups on the basis of the material used to fill the sockets: PPP, PRP, PRF, and control (no graft material) groups. Results were evaluated at 4 and 8 weeks after surgery. The ultrastructural morphology and constructs of each blood product were studied by a scanning electron microscope (SEM) or calculating concentrations of platelets, fibrinogen, platelet-derived growth factor, and transforming growth factor-β. A total of five microcomputed tomography images of specimens were selected for measurement, and the area occupied by the newly formed bone as well as the horizontal bone width were measured. Moreover, decalcified tissue specimens from each defect were analyzed histologically. The median area of new bone at 4 and 8 weeks and median horizontal bone width at 8 weeks were the highest in the PPP group. However, bone maturation in the PRF and the PRP groups was more progressed than that in the PPP and control groups. By SEM findings, the PRF group showed a more highly condensed fibrin fiber network that was regularly arranged when compared with the PPP and PRP groups. The growth factors released from platelets in PRP indicated higher concentrations than that in PRF. Under more severe conditions for bone formation, as in this experiment, the growth factors released from platelets had a negative effect on bone formation. This study showed that PPP is an effective material for the preservation of sockets with buccal dehiscence.

  8. Survival rates and bone loss after immediate loading of implants in fresh extraction sockets (single gaps). A clinical prospective study with 4 year follow-up

    Science.gov (United States)

    Wojtovicz, Eduardo; España-Lopez, Antonio; Jimenez-Guerra, Alvaro; Monsalve-Guil, Loreto; Ortiz-Garcia, Ivan; Serrera-Figallo, Maria-Angeles

    2018-01-01

    Background The aim of this prospective study was to report the outcome of treatment with implants inserted after tooth extraction and immediately loaded. Material and Methods Fifty-six patients with single tooth loss were treated with 116 IPX Galimplant® implants with internal connections and a sandblasted, acid-etched surface. All implants were placed after tooth extraction using a flapless approach without bone regeneration, and they were then immediately loaded with cemented acrylic prostheses. After a period of three months, definitive cemented ceramic prostheses were placed. Patients were examined throughout a total of 4 years of follow-up. Marginal bone loss and survival rates were evaluated using digital periapical radiographs, taking into account clinical variables such as age, gender, smoking, history of periodontitis, etiology of extraction, placement site, diameter, and implant length. The Mann-Whitney U and Kruskal-Wallis non-parametric tests were used to compare differences between subgroups created based on the different clinical variables identified. Results Clinical results indicate an implant survival and success rate of 97.4%. Three implants were lost. Of the 116 immediate acrylic single crowns initially placed, 113 were replaced with definitive ceramic crowns after 3 months. A total of 77.8% of implants were inserted in the maxilla, while 22.2% were inserted in the mandible. No further complications were reported after the follow-up period (4 years). The mean marginal bone loss was 0.67 mm ± 0.40 mm. No differences were found among the subgroups of study patients. Conclusions This study indicates that dental implants that are inserted after tooth extraction and immediately loaded may constitute a successful and predictable alternative implant treatment. Key words:Dental implants, post-extraction implants, fresh sockets, immediate loading, immediate prostheses, implant dentistry. PMID:29476669

  9. Correlation between the Appearance of Neuropeptides in the Rat Trigeminal Ganglion and Reinnervation of the Healing Root Socket after Tooth Extraction

    International Nuclear Information System (INIS)

    Gunjigake, Kaori K.; Goto, Tetsuya; Nakao, Kayoko; Konoo, Tetsuro; Kobayashi, Shigeru; Yamaguchi, Kazunori

    2006-01-01

    The neuropeptide substance P (SP) modulates bone metabolism. This study examined the temporal appearance of the neuropeptides SP and brain-derived nerve growth factor (BDNF) and their receptors (neurokinin-1 receptor (NK 1 -R) and Trk B, respectively) in the rat trigeminal ganglion to investigate the role of neuropeptides in healing after tooth extraction. Rats were anesthetized and their upper right first molars were extracted; the rats were sacrificed 3 hours and 1–21 days after extraction. Their trigeminal ganglion and maxilla were removed, and cryosections were prepared and immunostained using specific antibodies against SP, BDNF, NK 1 -R, and Trk B. In the tooth sockets after extraction, new bone and a few SP-immunoreactive nerve fibers were first seen at day 7, and bone completely filled the sockets at day 21. In the trigeminal ganglion, the proportions of NK 1 -R-, BDNF-, and Trk B-immunoreactive neurons changed similarly, i.e., they initially decreased, increased rapidly to maximum levels by day 3, and then decreased gradually to control levels until 21 days. These findings suggest that the appearance of neuropeptides in the trigeminal ganglion, the reinnervation of SP-immunoreactive nerve fibers, and bone repair in the tooth socket during healing after extraction were correlated

  10. Effects of ionizing radiation on wound healing of alveolar bone socket after extraction of rat maxillary molars

    Energy Technology Data Exchange (ETDEWEB)

    Iwata, Hiroshi; Yosue, Takashi [Nippon Dental Univ., Tokyo (Japan). School of Dentistry; Nasu, Masanori

    2001-05-01

    The purpose of this study was to examine the effects of radiation on the healing process of tooth extraction wounds. X-ray doses of 10 Gy or 20 Gy were delivered, once, to the maxillofacial area of Wistar-strain rats. Then, 24 hours after irradiation, the maxillary first molars were extracted bilaterally. The animals were sacrificed 3, 7, 10, 14, 21, 42, and 84 days after tooth extraction, and the maxilla were sliced, to make thin sections. These specimens were then double stained with alkaline phosphatase (ALP) and tartrate resistant acid phosphatase (TRAP). The ratio of bone area to socket area (bone formation ratio), the ratio of bone length to ALP positive area length (ALP positive ratio), and the number of TRAP-positive cells, were evaluated. The results showed: The bone formation ratios at days 3 and 7 after tooth extraction were significantly low in both irradiation groups, compared with those for the non-irradiation group. The ALP positive reaction ratio peaked 7 days after in the non-irradiation group. In both irradiation groups, the ratios that were worked out at 3 days and 7 days after were significantly lower than those in the non-irradiation group. There was no significant difference in the number of TRAP-positive cells between the non-irradiation group and the 10 Gy irradiation group. In the 20 Gy irradiation group, the TRAP-positive cell count plummeted to a significantly low level at 3 days after tooth extraction, compared with that in the non-irradiation group. (author)

  11. Effects of ionizing radiation on wound healing of alveolar bone socket after extraction of rat maxillary molars

    International Nuclear Information System (INIS)

    Iwata, Hiroshi; Yosue, Takashi; Nasu, Masanori

    2001-01-01

    The purpose of this study was to examine the effects of radiation on the healing process of tooth extraction wounds. X-ray doses of 10 Gy or 20 Gy were delivered, once, to the maxillofacial area of Wistar-strain rats. Then, 24 hours after irradiation, the maxillary first molars were extracted bilaterally. The animals were sacrificed 3, 7, 10, 14, 21, 42, and 84 days after tooth extraction, and the maxilla were sliced, to make thin sections. These specimens were then double stained with alkaline phosphatase (ALP) and tartrate resistant acid phosphatase (TRAP). The ratio of bone area to socket area (bone formation ratio), the ratio of bone length to ALP positive area length (ALP positive ratio), and the number of TRAP-positive cells, were evaluated. The results showed: The bone formation ratios at days 3 and 7 after tooth extraction were significantly low in both irradiation groups, compared with those for the non-irradiation group. The ALP positive reaction ratio peaked 7 days after in the non-irradiation group. In both irradiation groups, the ratios that were worked out at 3 days and 7 days after were significantly lower than those in the non-irradiation group. There was no significant difference in the number of TRAP-positive cells between the non-irradiation group and the 10 Gy irradiation group. In the 20 Gy irradiation group, the TRAP-positive cell count plummeted to a significantly low level at 3 days after tooth extraction, compared with that in the non-irradiation group. (author)

  12. Investigation of a Novel PLGA/CaP Scaffold in the Healing of Tooth Extraction Sockets to Alveolar Bone Preservation in Humans.

    Science.gov (United States)

    Araujo-Pires, Ana Claudia; Mendes, Vanessa Cristina; Ferreira-Junior, Osny; Carvalho, Paulo Sérgio Perri; Guan, Limin; Davies, John Edward

    2016-06-01

    It is expected that 40% to 60% of initial alveolar bone volume will be lost up to 6 months after tooth extraction. OsteoScaf(TM) (TRT, Toronto, ON, Canada) (poly (DL-lactide-co-glycololide/calcium phosphate [PLGA/CaP] scaffold) is a novel bone substitute material and represents a promising alternative for maintaining alveolar bone integrity in this clinical scenario. Here it was hypothesized that OsteoScaf would reduce alveolar bone lost after tooth extraction in patient, acting as a clot-retention device. A total of 10 patients (32 sockets) were included in the study, of which 16 sockets were grafted with OsteoScaf and 16 were used as control (coagulum alone). Cone beam computed tomography (CBCT) was performed both immediately following extraction and also at 120 days postoperatively, at which time biopsy samples were also harvested for histological analyses. Quantitative analysis of CBCT showed less bone resorption in the OsteoScaf groups, being 10.5% to 14.4% less bone lost in the center of the socket, 15.4% in the buccal region, and 12.6% in the palatal. Qualitative histological analysis showed new bone tissue in direct apposition to the scaffold - demonstrating its osteoconductive nature. OsteoScaf diminished the expected bone lost during the postextraction remodeling of the alveolar bone ridge at 120 days postextraction. © 2015 Wiley Periodicals, Inc.

  13. Alveolar bone dimensional changes of post-extraction sockets in humans: a systematic review

    NARCIS (Netherlands)

    van der Weijden, F.; Dell'Acqua, F.; Slot, D.E.

    2009-01-01

    Objective: To review the literature to assess the amount of change in height and width of the residual ridge after tooth extraction. Material and Methods: MEDLINE-PubMed and the Cochrane Central register of controlled trials (CENTRAL) were searched through up to March 2009. Appropriate studies which

  14. Filling of extraction sockets with autogenous bone in cats Preenchimento de alvéolos dentais de gatos com osso autógeno

    Directory of Open Access Journals (Sweden)

    Adelina Maria da Silva

    2012-01-01

    Full Text Available PURPOSE: To evaluate bone healing in the extraction socket of the feline mandibular canine tooth after grafting. METHODS: Eighteen adult cats were submitted to unilateral extraction of mandibular canine tooth and divided into three groups. In group 1 (n=6, control, the extraction socket was left empty. In group 2 (n=6, the extraction socket was filled with autogenous cancelous bone from the iliac crest and in group 3 (n=6, with cortical bone chips from the iliac crest. Cats were euthanized at 6 weeks postoperative. RESULTS: Immediate postoperative radiographs in dorsoventral view showed a radiolucent area at the extraction wound. A decreased radiolucency was observed on the radiographs taken at 6 weeks postoperative. Histological examination showed formation of woven bone within the extraction socket. The percentage of newly formed bone within the extraction socket, measured by the histometry, showed no statistically significant difference among the values of the three groups (Kruskal-Wallis'test p>0.05 (group 1: 52.54 ± 15.46, group 2: 50.51 ± 5.01, group 3: 51.85 ± 9.52. CONCLUSION: The bone regeneration observed in the extraction sockets filled with autogenous cancellous bone or autogenous cortical bone chips was similar to that observed in the control sites, given an observation period of 6 weeks after extraction of the mandibular canine tooth.OBJETIVO: Avaliar a regeneração óssea de alvéolos dentais de gatos após enxertia. MÉTODOS: Dezoito gatos adultos, distribuídos em três grupos de 6 animais cada, foram submetidos a extração do canino mandibular direito ou esquerdo. No grupo 1, controle, o alvéolo foi deixado vazio. No grupo 2, o alvéolo foi preenchido com osso esponjoso autógeno do osso ilíaco e no grupo 3, com raspa de osso cortical do osso ilíaco. Os animais foram submetidos à eutanásia 6 semanas após a cirurgia. RESULTADOS: Nas radiografias realizadas no pós-operatório imediato na projeção ventrodorsal

  15. Osteogenic potential of mesenchymal cells embedded in the provisional matrix after a 6-week healing period in augmented and non-augmented extraction sockets: an immunohistochemical prospective pilot study in humans.

    Science.gov (United States)

    Heberer, Susanne; Wustlich, Alexander; Lage, Hermann; Nelson, John J; Nelson, Katja

    2012-01-01

    The aim of the present clinical study was the evaluation of the osteogenic potential of mesenchymal cells embedded in the provisional matrix of non-augmented and with Bio-Oss collagen-augmented human extraction sockets after 6 weeks of healing time. Twenty-five patients with 47 extraction sites participated in the present study. After tooth removal, the extraction sockets were augmented with Bio-Oss collagen or not augmented. At implant placement, bone biopsies of the extraction sockets were obtained. The immunohistochemical analysis of the osteogenic potential of the mesenchymal cells in the provisional matrix was performed using three monoclonal antibodies: core-binding factor α1 (Cbfa1)/runt-related protein (Runx)2, osteonectin (OSN/secreted protein acidic and rich in cyst [SPARC]) and osteocalcin (OC). The statistical analysis was performed using two-factorial analysis for repeated measures, Mann-Whitney U-test and Spearman's rank-order correlation coefficient. Of 47 extraction sockets examined, 17 sockets demonstrated an almost complete ossification. Hence, the provisional matrix of the 30 remaining extraction sockets (21 non-augmented, 9 augmented) was immunohistochemically investigated. No evidence of acute or chronic inflammation was noted in any of the specimens. In the provisional matrix of the non-grafted socket, the median amount of Cbfa1/Runx2-positive cells was 72.3%, of OSN (SPARC) 66.9% and of OC 23.4%, whereas in the grafted sockets the median rate of immunopositive cells staining with Cbfa1/Runx2 was 73.3%, of OSN (SPARC) 61.4% and of OC 20.1%. There was no significant difference in the proportion of positive cells expressed by Cbfa1/Runx2, OSN/SPARC and OC between the grafted and non-grafted socket. Furthermore, the cell density did not correlate to the quantity of stained cells independent of the used proteins. After a 6-week healing period, the provisional matrix was demonstrated to have a high proportion of cells displaying a maturation of

  16. The Osteogenesis Effect and Underlying Mechanisms of Local Delivery of gAPN in Extraction Sockets of Beagle Dogs

    Science.gov (United States)

    Hu, Hongcheng; Pu, Yinfei; Lu, Songhe; Zhang, Kuo; Guo, Yuan; Lu, Hui; Li, Deli; Li, Xuefen; Li, Zichen; Wu, Yuwei; Tang, Zhihui

    2015-01-01

    A plastic and biodegradable bone substitute consists of poly (l-lactic-co-glycolic) acid and 30 wt % β-tricalcium phosphate has been previously fabricated, but its osteogenic capability required further improvement. We investigated the use of globular adiponectin (gAPN) as an anabolic agent for tissue-engineered bone using this scaffold. A qualitative analysis of the bone regeneration process was carried out using μCT and histological analysis 12 weeks after implantation. CBCT (Cone Beam Computed Tomography) superimposition was used to characterise the effect of the different treatments on bone formation. In this study, we also explored adiponectin’s (APN) influence on primary cultured human jaw bone marrow mesenchymal stem cells gene expressions involved in the osteogenesis. We found that composite scaffolds loaded with gAPN or bone morphogenetic protein 2 (BMP2) exhibited significantly increased bone formation and mineralisation following 12 weeks in the extraction sockets of beagle dogs, as well as enhanced expression of osteogenic markers. In vitro investigation revealed that APN also promoted osteoblast differentiation of primary cultured human jaw bone marrow mesenchymal stem cells (h-JBMMSCs), accompanied by increased activity of alkaline phosphatase, greater mineralisation, and production of the osteoblast-differentiated genes osteocalcin, bone sialoprotein and collagen type I, which was reversed by APPL1 siRNA. Therefore, the composite scaffold loaded with APN exhibited superior activity for guided bone regeneration compared with blank control or Bio-Oss® (a commercially available product). The composite scaffold with APN has significant potential for clinical applications in bone tissue engineering. PMID:26492241

  17. The Osteogenesis Effect and Underlying Mechanisms of Local Delivery of gAPN in Extraction Sockets of Beagle Dogs

    Directory of Open Access Journals (Sweden)

    Hongcheng Hu

    2015-10-01

    Full Text Available A plastic and biodegradable bone substitute consists of poly (l-lactic-co-glycolic acid and 30 wt % β-tricalcium phosphate has been previously fabricated, but its osteogenic capability required further improvement. We investigated the use of globular adiponectin (gAPN as an anabolic agent for tissue-engineered bone using this scaffold. A qualitative analysis of the bone regeneration process was carried out using μCT and histological analysis 12 weeks after implantation. CBCT (Cone Beam Computed Tomography superimposition was used to characterise the effect of the different treatments on bone formation. In this study, we also explored adiponectin’s (APN influence on primary cultured human jaw bone marrow mesenchymal stem cells gene expressions involved in the osteogenesis. We found that composite scaffolds loaded with gAPN or bone morphogenetic protein 2 (BMP2 exhibited significantly increased bone formation and mineralisation following 12 weeks in the extraction sockets of beagle dogs, as well as enhanced expression of osteogenic markers. In vitro investigation revealed that APN also promoted osteoblast differentiation of primary cultured human jaw bone marrow mesenchymal stem cells (h-JBMMSCs, accompanied by increased activity of alkaline phosphatase, greater mineralisation, and production of the osteoblast-differentiated genes osteocalcin, bone sialoprotein and collagen type I, which was reversed by APPL1 siRNA. Therefore, the composite scaffold loaded with APN exhibited superior activity for guided bone regeneration compared with blank control or Bio-Oss® (a commercially available product. The composite scaffold with APN has significant potential for clinical applications in bone tissue engineering.

  18. A 5-year comparison of marginal bone level following immediate loading of single-tooth implants placed in healed alveolar ridges and extraction sockets in the maxilla

    Science.gov (United States)

    Berberi, Antoine N.; Sabbagh, Joseph M.; Aboushelib, Moustafa N.; Noujeim, Ziad F.; Salameh, Ziad A.

    2014-01-01

    Purpose: The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol. Materials and Methods: Thirty-six patients in need of a single-tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden). Implants were placed either in healed ridges (group I) or immediately into fresh extraction sockets (group II). Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36, and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implant. Results: Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study. The mean change in marginal bone loss (MBL) after implant placement was 0.26 ± 0.161 mm for 1 year, and 0.26 ± 0.171 mm for 3 years, and 0.21 ± 0.185 mm for 5 years in extraction sockets and was 0.26 ± 0.176 mm for 1 year and 0.21 ± 0.175 mm for 3 years, and 0.19 ± 0.172 mm for 5 years in healed ridges group. Significant reduction of marginal bone was more pronounced in implants inserted in healed ridges (P prefabricated abutment placed during the surgery time seems to maintain marginal bone around implant in both healed and fresh extraction sites. PMID:24550840

  19. Photothermal stress triggered by near-infrared-irradiated carbon nanotubes up-regulates osteogenesis and mineral deposition in tooth-extracted sockets.

    Science.gov (United States)

    Kajiya, Hiroshi; Katsumata, Yuri; Sasaki, Mina; Tsutsumi, Takashi; Kawaguchi, Minoru; Fukushima, Tadao

    2015-01-01

    The bone regenerative healing process is often prolonged, with a high risk of infection particularly in elderly and diseased patients. A reduction in healing process time usually requires mechanical stress devices, chemical cues, or laser/thermal therapies. Although these approaches have been used extensively for the reduction of bone healing time, the exact mechanisms involved in thermal stress-induced bone regeneration remain unclear. Photothermal stress (PTS) stimulation was carried out using a novel photothermal device, composed of an alginate gel (AG) including carbon nanotubes (CNT-AGs) and their irradiator with near-infrared (NIR) light. We investigated the effects of optimal hyperthermia on osteogenesis, its signalling pathway in vitro and mineral deposition in tooth-extracted sockets in vivo. The PTS (10 min at 42 °C, every day), triggered by NIR-induced CNT, increased the activity of alkaline phosphatase (ALP) in mouse osteoblast MC3T3-E1 cells in a time-dependent manner compared with the non-thermal stress control. PTS significantly induced the expression of osteogenic-related molecules such as ALP, RUNX2 and Osterix in a time-dependent manner with phosphorylated mitogen-activated protein kinases (MAPK). PTS increased the expression of heat shock factor (HSF) 2, but not HSF1, resulting in activation of heat shock protein 27. PTS significantly up-regulated mineral deposition in tooth-extracted sockets in normal and ovariectomised osteoporotic model mice in vivo. Our novel CNT-based PTS up-regulated osteogenesis via activation of heat shock-related molecules, resulting in promotion of mineral deposition in enhanced tooth-extracted sockets.

  20. A 5- Year Comparison of Marginal Bone Level Following Immediate Loading of Single-Tooth Implants Placed in Healed Alveolar Ridges and Extraction Sockets in the Maxilla.

    Directory of Open Access Journals (Sweden)

    Antoine Nicolas Berberi

    2014-01-01

    Full Text Available AbstractPurpose: The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol.Materials and Methods: Thirty-six patients in need of a single tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden. Implants were placed in healed ridges (group I or immediately into extraction sockets (group II. Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36 and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implantResults: Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study and all remaining implants osseointegrated successfully after 5 years of functional loading. The mean change in marginal bone loss after implant placement was 0.267±0.161 for one year, and 0.265±0.171 for three years and 0.213±0.185 for five years in extraction sockets and was 0.266±0.176 for one year and 0.219±0.175 for three years and 0.194±0.172 for five years in healed ridges group. Significant reduction of marginal bone loss was more pronounced in implants inserted in healed ridges (P

  1. Three-dimensional analysis of bone remodeling following ridge augmentation of compromised extraction sockets in periodontitis patients: A randomized controlled study.

    Science.gov (United States)

    Aimetti, Mario; Manavella, Valeria; Corano, Lisa; Ercoli, Elena; Bignardi, Cristina; Romano, Federica

    2018-02-01

    The aim of this study was to analyze linear and volumetric hard tissue changes in severely resorbed alveolar sockets after ridge augmentation procedure and to compare them with spontaneous healing using three-dimensional cone beam computed tomography (CBCT). Thirty patients (mean age 53.2 ± 6.3 years) requiring tooth extraction for advanced periodontitis were randomly allocated to test and control groups. The test sites were grafted using a collagenated bovine-derived bone (DBBM-C) covered with a collagen membrane, while control sites had spontaneous healing. Both groups healed by secondary intention. Linear and volumetric measurements were taken on superimposed CBCT images obtained after tooth extraction and 12 months later. Greater horizontal shrinkage, localized mainly in the crestal zone, was observed in the control group (4.92 ± 2.45 mm) compared to the test group (2.60 ± 1.24 mm). While both groups presented a rebuilding of the buccal wall, it was most pronounced in the grafted sockets (2.50 ± 2.12 mm vs. 0.51 ± 1.02 mm). A significant difference was also registered in the percentage of volume loss between grafted and non-grafted sites (9.14% vs. 35.16%, p-value sockets with extensive buccal bone deficiencies undergo significant three-dimensional volumetric alterations following natural healing. The immediate application of a slow-resorbing xenograft with a covering collagen membrane seems to be effective in improving alveolar ridge shape and dimensions, thus potentially reducing the need for adjunctive regenerative procedures at the time of implant placement. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. Demineralised human dentine matrix stimulates the expression of VEGF and accelerates the bone repair in tooth sockets of rats.

    Science.gov (United States)

    Reis-Filho, Cláudio R; Silva, Elisângela R; Martins, Adalberto B; Pessoa, Fernanda F; Gomes, Paula V N; de Araújo, Mariana S C; Miziara, Melissa N; Alves, José B

    2012-05-01

    In this study we investigated the possible use of human demineralised dentine matrix (DHDM), obtained from the extracted teeth, as bone graft material and evaluated the expression of vascular endothelial growth factor (VEGF) induced by this material in the healing process of tooth sockets of rats. To evaluate bone regeneration and expression of VEGF induced by DHDM, thirty-two male Wistar rats weighing approximately 200 g were used. After maxillary second molar extraction, the left sockets were filled with DHDM and the right sockets were naturally filled by blood clot (control). The animals were sacrificed at 3, 7, 14 and 21 days after surgery and upper maxillaries were processed for histological, morphometric and immunohistochemical analyses. DHDM was used to evaluate the mechanical effect of bone graft material into sockets. Expression of VEGF was determined by immunohistochemistry in all groups. Our results demonstrated a significant increase in the newly formed bone tissue in sockets of 7, 14 and 21 days and a significant increase in VEGF expression at days 7 and 14 on treated sockets. Our results showed that DHDM increases the expression of VEGF and accelerates the healing process in rats tooth sockets, by stimulating bone deposition and also vessels formation. These results suggest that DHDM has osteoinductive/osteoconductive potential and may represent an efficient grafting material on guided bone regeneration. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. A comparative evaluation of extraction socket preservation with demineralized freeze-dried bone allograft alone and along with platelet-rich fibrin: A clinical and radiographic study

    Directory of Open Access Journals (Sweden)

    Dhaval J Thakkar

    2016-01-01

    Full Text Available Aims: To investigate clinically and radiographically, the bone fill in extraction sockets using demineralized freeze-dried bone allograft alone and along with platelet-rich fibrin (PRF. Materials and Methods: A randomized controlled clinical trial was carried out on 36 nonrestorable single-rooted teeth sites. Sites were randomized into demineralized freeze-dried bone allograft (DFDBA combined with PRF - test and DFDBA - control groups using a coin toss method. After the placement of graft material, collagen membrane was used to cover it. The clinical parameters recorded were ridge width and ridge height. All the parameters were recorded at baseline and at 90 and 180 days. Statistical Analysis Used: Independent t-test and paired t-test. Results: In both groups, there is significant reduction in loss of ridge width and ridge height from baseline to 90 days (P < 0.001, baseline to 180 days (P < 0.001, and 90-180 days (P < 0.001. However, when both the groups were compared the test group favored in the reduction of ridge width while there was no statistical difference in reduction of ridge height among at different intervals. Conclusions: Although DFDBA is considered as an ideal graft material, PRF can be used as an adjunctive with DFDBA for socket preservation.

  4. Botulinum Toxin Type A as Preoperative Treatment for Immediately Loaded Dental Implants Placed in Fresh Extraction Sockets for Full-Arch Restoration of Patients With Bruxism.

    Science.gov (United States)

    Mijiritsky, Eitan; Mortellaro, Carmen; Rudberg, Omri; Fahn, Miri; Basegmez, Cansu; Levin, Liran

    2016-05-01

    The aim of the present report was to describe the use of Botulinum toxin type A as preoperative treatment for immediately loaded dental implants placed in fresh extraction sockets for full-arch restoration of patients with bruxism. Patients with bruxism who were scheduled to receive immediately loaded full-arch implant supported fixed restorations were included in this retrospective clinical report. To reduce the occlusal forces applied in patients with bruxism, Botulinum toxin type A was introduced prior to the implant placement procedure. Patients were followed and implant survival as well as peri-implant bone level was assessed in each periodic follow-up visit. Adverse effects were also recorded. A control group with no use of Botulinum toxin was evaluated as well. A total of 26 patients (13 test and 13 control), with bruxism, aged 59.15 ± 11.43 years on average were included in this retrospective report and received immediately loaded dental implants placed in fresh extraction sockets for full-arch restoration. The test group treatment preceded by Botulinum toxin type A injection. Maxillary arches were supported by 8 to 10 implants while the mandibular arch was supported by 6 implants. All surgeries went uneventfully and no adverse effects were observed. The average follow-up time was 32.5 ± 10.4 months (range, 18-51). In the test group, no implant failures were recorded. One patient presented with 1 to 2 mm bone loss around 4 of the implants; the other implants presented with stable bone level. In the control group 1 patient lost 2 implants and another demonstrated 2 mm bone loss around 3 of the implants. The preoperative use of Botulinum toxin in patients with bruxism undergoing full-arch rehabilitation using immediately loaded dental implants placed in fresh extraction sockets seems to be a technique that deserves attention. Further long-term, large-scale randomized clinical trials will help to determine the additional benefit of this suggested

  5. Marginal bone loss evaluation around immediate non-occlusal microthreaded implants placed in fresh extraction sockets in the maxilla: a 3-year study.

    Science.gov (United States)

    Calvo-Guirado, José L; Gómez-Moreno, Gerardo; Aguilar-Salvatierra, Antonio; Guardia, Javier; Delgado-Ruiz, Rafael A; Romanos, Georgios E

    2015-07-01

    To evaluate marginal bone loss over 3 years around immediate microthreaded implants placed in the maxillary anterior/esthetic zone and immediately restored with single crowns. Seventy-one implants (with microthreads up to the platform--rough surface body and neck, internal connection and platform switching) were placed in fresh extraction sockets in the maxillary arches of 30 men and 23 women (mean age 37.85 ± 7.09 years, range 27-60). All subjects had at least 3 mm of soft tissue to allow the establishment of adequate biologic width and to reduce bone resorption. Each patient received a provisional restoration immediately after implant placement with slight occlusal contact. Mesial and distal bone height was evaluated using digital radiography on the day following implant placement (baseline) and after 1, 2, and 3 years. Primary stability was measured with resonance frequency analysis. No implants failed, resulting in a cumulative survival rate of 100% after 3 years. Marginal bone loss from implant collar to bone crest measured at baseline (peri-implant bone defect at the fresh extraction socket) and after 3 years was 0.86 mm ± 0.29 mm. Mesial and distal site crestal bone loss ranged from 3.42 mm ± 1.2 mm at baseline to 3.51 mm ± 1.5 mm after 3 years (P = 0.063) and from 3.38 mm ± 0.9 mm at baseline to 3.49 mm ± 0.9 mm after 3 years, respectively (P = 0.086). This prospective study found minimal marginal bone loss and a 100% implant survival rate over the 3-year follow-up for microthreaded immediate implants subjected to immediate non-occlusal loading. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. Maintenance of class III trifurcated molars versus implant placement in regenerated extraction sockets: long-term results of 2 cases.

    Science.gov (United States)

    Zafiropoulos, Gregory-George K; di Prisco, Manuela Occipite; Deli, Giorgio; Hoffmann, Oliver

    2011-03-01

    Studies to date have reached differing conclusions regarding the long-term prognosis of teeth with class III furcation involvement. Replacement of such teeth with implants could be an alternative. This report compares the treatment outcomes of 2 cases with similar disease progression: 1 treated by implant therapy and 1 maintained with nonsurgical periodontal treatment. Two patients with advanced chronic periodontitis and class III furcation involvement of all molars were treated. Case 1 received a conservative periodontal and antibiotic treatment, followed by 15 years of maintenance. In case 2, the molars were extracted and replaced with implants, and the implants were observed for 7 years. Clinical attachment level (CAL), probing attachment level (PAL), bleeding on probing, plaque index, and periodontal pathogens were recorded. Despite good compliance of case 1, periodontal pathogens were not eliminated and tissue destruction was not halted. The PAL outcomes of case 2 improved over time; mean PAL loss reached 0.35 mm/y in the first 3 years and then decreased to 0.01 mm/y. While CAL outcomes did not change in case 2, case 1 showed increased CAL loss after 8 years. Based on the limited findings of this case report, extraction of molars with class III furcation involvement and subsequent implant placement may render a better predictability of treatment outcomes than nonsurgical periodontal therapy in the cases of infection with periodontal pathogens.

  7. The effect of combined Moringa oleifera and demineralized freeze-dried bovine bone xenograft on the amount of osteoblast and osteoclast in the healing of tooth extraction socket of Cavia cobaya

    Directory of Open Access Journals (Sweden)

    Rostiny Rostiny

    2016-12-01

    Full Text Available Background: Alveolar bone has an important role in providing support to teeth and dentures. Loss of support caused by alveolar resorption will cause functional and aesthetic problems. Preservation socket using bone graft is one way to maintain the dimensions of the alveolar bone. Moringa oleifera leaf can increase the activity of bone graft in the formation of new bone. Purpose: This study was aimed to evaluate the effect of combined Moringa oleivera leaf extract and demineralized freeze-dried bovine bone xenograft (DFDBBX towards the formation of osteoblasts and osteoclasts in the tooth extraction sockets of cavia cobaya. Method: This study used 28 cavia cobayas divided into four groups. The combination of Moringa oleifera leaf extract and DFDBBX was inducted into the sockets of lower incisor tooth with certain dose in each group, ointment 1 containing PEG (a mixture of PEG 400 and PEG 4000 for control group, ointment 2 containing Moringa oleifera leaf extract and DFDBBX and PEG (at active subtance consentration of 0.5% for group 1, ointment 3 containing Moringa oleifera leaf extract and DFDBBX and PEG (at active substance concentration of 1% for group 2, and Ointment 4 containing Moringa oleifera leaf extract and DFDBBX and PEG (at active substance consentration of 2% for group 3. paraffin block preparations were made for histopathology examination using hematoxylin eosin staining. Result: The results showed that there were significant differences of the number of osteoblasts and osteoclasts in each treatment group (p <0.05. Conclusion: It can be concluded that the combination of Moringa oleifera leaf extract and DFDBBX at 2% cocentration can increase the number of osteoblasts and decrease osteoclasts in the healing of tooth extraction sockets of cavia cobaya.

  8. Combination of Aloe vera and xenograft induction on decreasing of NF-kb of tooth extraction socket preservation in Cavia cobaya

    Directory of Open Access Journals (Sweden)

    Utari Kresnoadi

    2014-03-01

    Full Text Available Background: Tooth extraction can naturally cause inflammation triggering osteoclast proliferation and alveolar bone resorption. Preservation of the tooth extraction sockets is needed for patients in order to reduce alveolar bone resorption risks. Aloe vera is known to have anthraquinones components, namely Aloin, Aloe emedin, and barbaloin, considered as anti-inflammation. Therefore, to overcome the inflammation, the role of NF-kb is very significant to decrease nuclear factor kappa b (NF-kb. As a result, inflammation risks will be decreased. Purpose: The study was aimed to determine the induction effect of combination of Aloe vera and XCB into tooth extraction sockets to reduce inflammation by reducing NF-kb expression, osteoclasts and osteoblasts. Methods: Forty-eight Cavia cobaya were divided into eight groups, each group consisted of six animals. The mandibular incisors of those Cavia cobaya were extracted and induced with either PEG, XCB, Aloe vera, or the combination of Aloe vera + XCB. Those animals were sacrificed on day 7 and day 30 after the extraction. Then immunohistochemical and histopathology examinations were conducted to observe NF-kb expression, osteoblasts and osteoclasts. Results: It was known that in group induced with the combination of Aloe vera and xenograft concelous bovine, the growth of osteoblasts was high, while NF-kb expression and osteoclasts reduced. Conclusion: It can be concluded that the induction of the combination of Aloe vera and XCB into the tooth extraction sockets can reduce NF-kb expression and osteoclast, as a result, alveolar bone resorption risks decrease, and osteoblast increase.Latar belakang: Trauma mekanis akibat pencabutan gigi asli menyebabkan keradangan. Keradangan memicu proliferasi osteoklas sehingga menyebabkan resorpsi tulang alveolararis. Pada pembuatan gigi tiruan, resorpsi tulang alveolar yang terjadi, sangat tidak diinginkan, sebab resorpsi tulang alveolar mengurangi keberhasilan

  9. Tethering sockets and wrenches

    Science.gov (United States)

    Johnson, E. P.

    1990-01-01

    The tethering of sockets and wrenches was accomplished to improve the safety of working over motor segments. To accomplish the tethering of the sockets to the ratchets, a special design was implemented in which a groove was machined into each socket. Each socket was then fitted with a snap ring that can spin around the machined groove. The snap ring is tethered to the handle of the ratchet. All open end wrenches are also tethered to the ratchet or to the operator, depending upon the type. Tests were run to ensure that the modified tools meet torque requirements. The design was subsequently approved by Space Safety.

  10. Tethering sockets and wrenches

    Science.gov (United States)

    Johnson, E. P.

    1990-07-01

    The tethering of sockets and wrenches was accomplished to improve the safety of working over motor segments. To accomplish the tethering of the sockets to the ratchets, a special design was implemented in which a groove was machined into each socket. Each socket was then fitted with a snap ring that can spin around the machined groove. The snap ring is tethered to the handle of the ratchet. All open end wrenches are also tethered to the ratchet or to the operator, depending upon the type. Tests were run to ensure that the modified tools meet torque requirements. The design was subsequently approved by Space Safety.

  11. Deproteinized Bovine Bone Mineral or Autologous Bone at Dehiscence Type Defects at Implants Installed Immediately into Extraction Sockets: An Experimental Study in Dogs.

    Science.gov (United States)

    Pereira, Flavia Priscila; De Santis, Enzo; Hochuli-Vieira, Eduardo; de Souza Faco, Eduardo F; Pantani, Fabio; Salata, Luiz A; Botticelli, Daniele

    2016-06-01

    The aim of this study was to evaluate bone regeneration at surgically created dehiscence buccal defects at implants placed immediately into extraction sockets (IPIES) of small dimensions filled with autogenous bone or deproteinized bovine bone mineral (DBBM) associated with a collagen membrane. Eight Labrador dogs were used and implants were placed immediately into the extraction sockets of the second premolar. The buccal wall was subsequently removed to create a standardized defect, 4 mm wide coronally, 2 mm wide apically, and 6 mm high. Autogenous bone particles (AB) or DBBM granules were used to fill the defects. All surgical sites were subsequently covered by a resorbable collagen membrane and a non-submerged healing was allowed. After 4 months, the animals were euthanized and bone blocks harvested and processed for histomorphometric analysis. The bony crest at the buccal aspect (C) was located 2.3 ± 0.8 mm and 1.7 ± 0.7 mm apically to the implant shoulder (IS) at the AB and DBBM sites, respectively. The coronal levels of osseointegration at the buccal aspect (B) were located 2.7 ± 0.7 mm and 2.2 ± 1.0 mm apically to IS at the AB and DBBM sites, respectively. At the AB sites, the peri-implant mucosa was located 4.3 ± 0.9 mm, 4.7 ± 0.9 mm, and 2.0 ± 1.6 mm coronally to C, B, and IS, respectively. The corresponding values at the DBBM sites were 4.3 ± 0.6 mm, 4.8 ± 0.6 mm, and 2.5 ± 0.8 mm, respectively. No statistically significant differences were found. The treatment of surgically created buccal defects at IPIES sites using Bio-Oss® (Geistlich Biomaterials, Wolhusen, LU, Switzerland) or autogenous bone, concomitantly with a collagen membrane, engenders bone regeneration to a similar extent after 4 months of healing. © 2015 Wiley Periodicals, Inc.

  12. Purposeful exposure of a polylactic acid barrier to achieve socket preservation for placement of dental implants: case series report.

    Science.gov (United States)

    Rosen, Paul S; Rosen, Adam D

    2013-01-01

    This retrospective case series reports on the use of a polylactic acid barrier that was left exposed in the process of socket preparation for the placement of dental implants. A retrospective chart review found 43 patients with 48 extraction sockets that were treated in this manner. Teeth were removed and the sockets were thoroughly debrided, with 40 of them receiving a bone replacement graft covered by the polylactic acid barrier and the additional 8 receiving the membrane alone. Suturing left the barrier exposed, and the sites were re-entered on average at 23 weeks for the placement of a dental implant. All sites were able to receive a dental implant, demonstrating the ability to leave a polylactic acid barrier exposed and achieve successful guided bone regeneration (GBR) results. This ultimately helped avoid some of the negative sequelae of trying to achieve primary closure of the flaps at the time of tooth extraction.

  13. Network protocols and sockets

    OpenAIRE

    BALEJ, Marek

    2010-01-01

    My work will deal with network protocols and sockets and their use in programming language C#. It will therefore deal programming network applications on the platform .NET from Microsoft and instruments, which C# provides to us. There will describe the tools and methods for programming network applications, and shows a description and sample applications that work with sockets and application protocols.

  14. Socket sclerosis--an obstacle for orthodontic space closure?

    Science.gov (United States)

    Baumgaertel, Sebastian

    2009-07-01

    Socket sclerosis is a rare reaction to tooth extraction resulting in high-density bone in the center of the alveolar process, where, under normal circumstances, cancellous bone is to be expected. In an adult orthodontic patient, routine extractions of the mandibular first permanent bicuspids were performed, resulting in socket sclerosis and unsuccessful orthodontic space closure. Orthodontic mini-implants were inserted to augment anchorage and aid in space closure. In the presence of socket sclerosis, conventional orthodontic mechanics failed to close the extraction spaces. However, with absolute anchorage in place, space closure occurred at a nearly normal rate. After treatment, no signs of socket sclerosis were discernible on the periapical radiographs. Socket sclerosis can be an obstacle for orthodontic space closure if traditional mechanics are employed. However, mini-implant-reinforced anchorage can lead to successful space closure, resulting in complete resolution of the sclerotic sites.

  15. Dry Socket: Incidence, Clinical Features, and Predisposing Factors

    Directory of Open Access Journals (Sweden)

    Babatunde O. Akinbami

    2014-01-01

    Full Text Available Background. Dry socket is a global phenomenon. The purpose of the study was to investigate the incidence of dry socket in recent times in a Nigerian Tertiary Hospital. Methods. Patients who were referred for dental extractions were included in the study. The case files of patients were obtained and information retrieved included biodata, indication for extraction, number and type of teeth extracted, oral hygiene status, compliance to oral hygiene instructions, and development of dry socket. Results. One thousand, one hundred and eighty two patients with total of 1362 teeth extracted during the 4-year period of the study were analyzed, out of which 1.4% teeth developed dry socket. The mean age (SD was 35.2 (16.0 years. Most of the patients who presented with dry socket were in the fourth decade of life. Mandibular teeth were affected more than maxillary teeth. Molars were more affected. Retained roots and third molars were conspicuous in the cases with dry socket. Conclusion. The incidence of dry socket in our centre was lower than previous reports. Oral hygiene status, lower teeth, and female gender were significantly associated with development of dry socket. Treatment with normal saline irrigation and ZnO eugenol dressings allowed relief of the symptoms.

  16. 'Incidence Of Dry Socket\\' In Benin City: Analysis Of 21 Cases ...

    African Journals Online (AJOL)

    Zinc oxide/Eugenol dressing was the mainstay of treatment after irrigation of the socket with normal saline. The low incidence of dry socket in this review shows that it is not a common complication of tooth extraction in our hospital. Keywords: Dry socket, incidence. Annals of Biomedical Science Vol. 2 (2) 2003: pp. 82-87 ...

  17. A Randomized Case-Series Study Comparing the Stability of Implant with Two Different Surfaces Placed in Fresh Extraction Sockets and Immediately Loaded

    Science.gov (United States)

    Vanden Bogaerde, Leonardo; Sennerby, Lars

    2016-01-01

    Background. Hydrophilic and moderately rough implant surfaces have been proposed to enhance the osseointegration response. Aim. The aim of this study was to compare early changes of stability for two implants with identical macrodesign but with different surface topographies. Materials and Methods. In 11 patients, a total of 22 implants (11 bimodal (minimally rough, control) and 11 proactive (moderately rough and hydrophilic, test), Neoss Ltd., Harrogate, UK) were immediately placed into fresh extraction sockets and immediately loaded. The peak insertion torque (IT) was measured in Ncm at placement. Resonance Frequency Analysis (RFA) measurements were made at baseline and 2, 4, 6, and 12 weeks after surgery. Results. The two implant types showed similar IT and RFA values at placement (NS). A dip of RFA values after 2 weeks followed by an increase was observed, where the test implant showed a less pronounced decrease and a more rapid recovery than the control implant. The test implants were significantly more stable than the control ones after 12 weeks. Conclusions. The results from the present study indicated that the hydrophilic and rougher test implant was more resistant to immediate loading and showed a significantly higher stability than the smoother control implant after 12 weeks. PMID:27042180

  18. Alveolar socket healing: what can we learn?

    Science.gov (United States)

    Araújo, Mauricio G; Silva, Cléverson O; Misawa, Mônica; Sukekava, Flavia

    2015-06-01

    Tooth extraction induces a series of complex and integrated local changes within the investing hard and soft tissues. These local alterations arise in order to close the socket wound and to restore tissue homeostasis, and are referred to as '"socket healing". The aims of the present report were twofold: first, to describe the socket-healing process; and, second, to discuss what can be learned from the temporal sequence of healing events, in order to improve treatment outcomes. The socket-healing process may be divided into three sequential, and frequently overlapping, phases: inflammatory; proliferative; and modeling/remodeling. Several clinical and experimental studies have demonstrated that the socket-healing process promotes up to 50% reduction of the original ridge width, greater bone resorption at the buccal aspect than at the lingual/palatal counterpart and a larger amount of alveolar bone reduction in the molar region. In conclusion, tooth extraction, once a simple and straightforward surgical procedure, should be performed in the knowledge that ridge reduction will follow and that further clinical steps should be considered to compensate for this, when considering future options for tooth replacement. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. Using growth factors in human extraction sockets: a histologic and histomorphometric evaluation of short-term healing

    NARCIS (Netherlands)

    Geurs, N.; Ntounis, A.; Vassilopoulos, P.; van der Velden, U.; Loos, B.G.; Reddy, M.

    2014-01-01

    Purpose: Ridge preservation protocols reduce crestal remodeling after tooth extraction. There is insufficient evidence on bone grafting in combination with platelet-rich plasma (PRP) or recombinant human platelet-derived growth factor (rhPDGF-BB). The aim of this study is to evaluate healing of

  20. Periotest values of implants placed in sockets augmented with calcium phosphosilicate putty graft: a comparative analysis against implants placed in naturally healed sockets.

    Science.gov (United States)

    Mahesh, Lanka; Narayan, Tv; Kostakis, Georgios; Shukla, Sagrika

    2014-03-01

    To measure implant stability using periotest values of implants placed in sockets augmented with calcium phospho-silicate putty (CPS Putty) as compared with implant stability in naturally healed sockets. Twenty two sockets were implanted with CPS Putty immediately after extraction. The sockets were re-entered after a healing period at 5 to 6 months (average 5.3 months) for implant placement. Periotest values were recorded during implant insertion to assess primary stability. These were compared with the Periotest values of 26 implants placed in 22 patients, with naturally healed sockets. Periotest values were significantly lower in the grafted group, indicating better implant stability in sites grafted with CPS putty. Implant stability seems to be significantly higher in sockets augmented using CPS putty when compared to nongrafted sites. This suggests that socket grafting with CPS putty may enhance the quality of available bone for implantation.

  1. Clinical safety and efficacy of implantation of octacalcium phosphate collagen composites in tooth extraction sockets and cyst holes

    Directory of Open Access Journals (Sweden)

    Tadashi Kawai

    2016-09-01

    Full Text Available It was demonstrated that octacalcium phosphate collagen composite achieved notable bone regeneration in bone defects in preclinical studies. On the basis of the research results, an investigator-initiated exploratory clinical trial was conducted after approval from a local Institutional Review Board. This clinical study was performed as a single-arm non-randomized intervention study. Octacalcium phosphate collagen composite was implanted into a total of 10 cases of alveolar bone defects after tooth extractions and cystectomy. Safety assessment was performed in terms of the clinical course and several consecutive laboratory examinations, and sequential radiographs were used for efficacy assessment. All participants uneventfully completed the clinical trial without major problems in their general condition. Postoperative wound swelling was observed, as also commonly seen in tooth extraction or cystectomy. Although no serious liver dysfunction, renal dysfunction, electrolyte imbalance, or abnormal urinalysis results were recognized, the number of white blood cells and C-reactive protein level temporarily increased after the operation. An increase in radiopacity in the octacalcium phosphate collagen composite–implanted site was observed in all cases. Finally, the border between the original bone and the octacalcium phosphate collagen composite–implanted site became indistinguishable. These results suggest that octacalcium phosphate collagen composite could be utilized safely in clinical situations in the future.

  2. Morphometric Changes of the Socket after Site Preservation Using Nanobone and Collagen Membrane or Stypro Versus Extraction Alone

    Directory of Open Access Journals (Sweden)

    Salahi S

    2015-06-01

    Full Text Available Statement of Problem: The long-term success of a dental implant relies on implant osseointegration into native and viable bone, implant placement in an ideal position, and optimal hard and soft tissue contour. This requires the presence of sufficient alveolar bone volume, good alveolar ridge (Practically with no sign of atrophy and good surgical technique. Objectives: The aim of this randomized controlled clinical study was to evaluate morphometric changes after different alveolar ridge preservation procedures. Materials and Methods: In this study, 33 patients who had single-rooted premolar, which needed to be extracted, were recruited. Patients were randomly divided into 3 groups and after tooth extraction the following treatments were administered: in group A: NanoBone and a collagen membrane; in group B: NanoBone and Stypro; and in group C: natural healing. The following clinical parameters were evaluated at baseline and 6 months after the extraction: buccolingual width, midbuccal height (with the use of a custom made stent and width of keratinized gingiva. For data analysis, Paired t-test,one-way ANOVA and Tukey’s tests were used. Results: The average reduction in the buccolingual width, midbuccal height and keratinized gingiva was as follows: group A: 1.18±0.6, 0.64±0.92 and 3.45±1.75 mm; group B: 2.18±0.75, 0.73±0.78 and 4.73±0.9 mm; and group C: 1±0.89, 2.36±1.21 and 5±0.63 mm, respectively. Moreover, a significantly reduced resorption was found in both the buccolingual width and the width of keratinized gingiva in group A as compared to groups B and C (p<0.05. Conclusions: This study showed that the use of collagen membrane+Nano bone (group A can significantly reduce the horizontal resorption of the alveolar ridge and keratinized tissue more effectively than stypro+Nano bone (group B and blood clot alone and natural healing (group C.

  3. Tapered, Double-Lead Threads Single Implants Placed in Fresh Extraction Sockets and Healed Sites of the Posterior Jaws: A Multicenter Randomized Controlled Trial with 1 to 3 Years of Follow-Up.

    Science.gov (United States)

    Cucchi, Alessandro; Vignudelli, Elisabetta; Franco, Simonetta; Levrini, Luca; Castellani, Dario; Pagliani, Luca; Rea, Massimiliano; Modena, Claudio; Sandri, Giulio; Longhi, Carlo

    2017-01-01

    To evaluate the survival, success, and complication rates of tapered double-lead threads single implants, placed in fresh extraction sockets and healed sites of the posterior jaws. The enrolled patients were randomly divided into 2 groups: in the test group (TG), all implants were inserted at the time of tooth extraction; in the control group (CG), all implants were placed 3 months after extraction. The implants were followed for a period of 1 to 3 years after loading. The main outcomes were implant survival, complications, and implant-crown success. Ninety-two patients had 97 installed implants (49 in the TG, 48 in the CG). Only two implants failed, in the TG; the survival rates were therefore 95.9% (47/49) and 100% (48/48) for TG and CG, respectively. In the surviving implants, no complications were reported, for an implant-crown success of 100%. Although a significant difference was found in the levels of primary stability between TG and CG, single implants placed in fresh extraction sockets and healed sites of the posterior jaws had similar survival and complication rates. Crestal bone levels and peri-implant bone resorption showed similar values. A longer follow-up period is however required, to confirm these positive outcomes.

  4. Histologic evaluation of new bone in post-extraction sockets induced by melatonin and apigenin: an experimental study in American fox hound dogs.

    Science.gov (United States)

    Calvo-Guirado, José Luis; López-López, Patricia J; Domínguez, Manuel Fernández; Gosálvez, Manuel Maiquez; Prados-Frutos, Juan Carlos; Gehrke, Sergio Alexandre

    2016-05-18

    The aim of this study was to evaluate the effect of topical applications of melatonin and apigenin (4',5,7-trihydroxyflavone) on new bone formation in post-extraction sockets after 30, 60 and 90 days. Six American fox hounds were used in the study, extracting mandibular premolars (P2, P3 and P4) and first molar (M1). Melatonin or apigenin impregnated in collagen sponges were applied at P3, P4 and M1 sites in both hemimandibles; P2 sites were used as control sites. Bone biopsies were taken at 30, 60 and 90 days and stained with hematoxylin-eosin. At 30 days, a higher percentage of immature bone was observed in the control group (58.11 ± 1.76%) than in the apigenin (34.11 ± 1.02%) and melatonin groups (24.9 ± 0.14%) with significant differences between the three groups (P < 0.05). At 60 days, results were significantly better at melatonin sites (10.34 ± 1.09%) than apigenin (19.22 ± 0.35%) and control sites (36.7 ± 1.11%) (P < 0.05). At 90 days, immature bone percentages were similar for all groups. New bone formation was higher in melatonin group (79.56 ± 1.9%) than apigenin (68.89 ± 1.5%) and control group (58.87 ± 0.12%). Topical applications of either melatonin or apigenin have a potential to accelerate bone tissue in early healing stages; melatonin was seen to have stimulated bone maturation to a greater extent at the 60 days of follow-up. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. Efficacy of plasma-rich growth factor in the healing of postextraction sockets in patients affected by insulin-dependent diabetes mellitus.

    Science.gov (United States)

    Mozzati, Marco; Gallesio, Giorgia; di Romana, Sara; Bergamasco, Laura; Pol, Renato

    2014-03-01

    To evaluate the efficacy of plasma-rich growth factor (PRGF) in improving socket healing after tooth extraction in diabetic patients. This was a split-mouth study in which each patient also served as the control: the study socket was treated with PRGF, whereas the control socket underwent natural healing. The outcome variables were the Healing Index, residual socket volume, visual analog scale score, postsurgical complications, and outcome of a patient questionnaire. The investigation considered the impact of hyperglycemia, glycated hemoglobin, End Organ Disease Score, and smoking habits. Follow-up included 4 postextraction checkups over a 21-day period. Pairs of correlated continuous variables were analyzed with the Wilcoxon test, independent continuous variables with the Mann-Whitney test, and categorical variables with the χ(2) test or Fisher test. From January 2012 to December 2012, 34 patients affected by insulin-dependent diabetes mellitus underwent contemporary bilateral extractions of homologous teeth. The treatment-versus-control postoperative comparison showed that PRGF resulted in significantly smaller residual socket volumes and better Healing Indices from days 3 to 14. The patients' questionnaire outcomes were unanimously in favor of PRGF treatment. The small sample of patients with glycemia values of at least 240 mg/dL showed worse Healing Index and minor socket decreases. PRGF application after extraction improved the healing process in diabetic patients by accelerating socket closure (epithelialization) and tissue maturation, proving the association between PRGF use and improved wound healing in diabetic patients. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  6. Socket Preservation with d-PTFE Membrane: Histologic Analysis of the Newly Formed Matrix at Membrane Removal.

    Science.gov (United States)

    Laurito, Domenico; Cugnetto, Riccardo; Lollobrigida, Marco; Guerra, Fabrizio; Vestri, Annarita; Gianno, Francesca; Bosco, Sandro; Lamazza, Luca; De Biase, Alberto

    This study aimed to evaluate the efficacy of an exposed high-density polytetrafluoroethylene (d-PTFE) membrane in preventing epithelial migration in postextraction sockets. For this purpose, a histologic description of the newly formed soft tissue underlying the membrane is presented. The periodontal status of the adjacent teeth was also evaluated to assess the gingival response. Ten premolar extraction sockets were treated. After tooth extraction, the sockets were filled with nanocrystalline hydroxyapatite and covered with d-PTFE membranes. Subperiosteal pockets were created to ensure the stability of the membranes. Membranes were left intentionally exposed and were atraumatically removed after 28 days. At that time, a bioptic specimen of the newly formed soft tissue under the membranes was taken. All the histologic samples showed a dense connective tissue without epithelial cells and no signs of foreign body reaction. No significant variation of the periodontal indices was observed on the teeth adjacent to the extraction sites. The study results indicate that exposed d-PTFE membranes can prevent epithelial migration in healing sockets without consequences on the periodontal health.

  7. Factors affecting sodium hypochlorite extraction of CCA from treated wood.

    Science.gov (United States)

    Gezer, E D; Cooper, P A

    2009-12-01

    Significant amounts of chromated copper arsenate (CCA) treated wood products, such as utility poles and residential construction wood, remain in service. There is increasing public concern about environmental contamination from CCA-treated wood when it is removed from service for reuse or recycling, placed in landfills or burned in commercial incinerators. In this paper, we investigated the effects of time, temperature and sodium hypochlorite concentration on chromium oxidation and extraction of chromated copper arsenate from CCA-treated wood (Type C) removed from service. Of the conditions evaluated, reaction of milled wood with sodium hypochlorite for one hour at room temperature followed by heating at 75 degrees C for two hours gave the highest extraction efficiency. An average of 95% Cr, 99% Cu and 96% As could be removed from CCA-treated, milled wood by this process. Most of the extracted chromium was oxidized to the hexavalent state and could therefore be recycled in a CCA treating solution. Sodium hypochlorite extracting solutions could be reused several times to extract CCA components from additional treated wood samples.

  8. Hyperbaric oxygen therapy in management of severe dry socket pain

    International Nuclear Information System (INIS)

    Abdellateef, Abdelamajeed; Elrefai, Jamil; AlJadid, Omar; Alabbadi, Amjad

    2009-01-01

    To assess the role and efficacy of hyperbaric oxygen therapy (HBOT) in the treatment of pain resulting from dry socket. From January 2006 to May 2007, 25 patients who had been diagnosed by the oral surgeon in the Dental Department of Princess Haya Hospital, Aqaba, Jordan with dry socket with severe intolerable pain, untreated with the classical treatments, were treated with HBOT. Fifteen patients (60%) were treated in a single HBOT session after which an almost complete resolution of pain took place, 7 patients (28%) were treated in 2 sessions and 3 patients (12%) needed 3 HBOT sessions to cure the pain. This preliminary study to assess the role of HBOT in the treatment of dry socket pain showed a great reduction of pain intensity of dry socket following administration of HBOT. (author)

  9. Assessment of regeneration of bone in the extracted third molar sockets augmented using xenograft (CollaPlugTN Zimmer in comparison with the normal healing on the contralateral side

    Directory of Open Access Journals (Sweden)

    Murugan Ranganathan

    2017-01-01

    Full Text Available Introduction: Alveolar bone resorption is a significant clinical problem. Bone loss in third molar region following extraction or surgical removal not only leads to periodontal problems in second molar region but also it may lead to some serious problems like increased incidence of angle fractures. In order to reduce the risks following third molar surgery, the socket should be augmented with bone grafts. In recent days guided tissue regeneration is the most accepted and successful technique followed many authors and its efficacy has been proved. Materials and Methods: Based upon our clinical experience, the use of bio absorbable collagen wound dressing such as CollaPlugTN has achieved quick healing and more primary wound coverage. Amongst the graft materials collagen is preferable due to its high biocompatibility and hemostatic ability. This study was done to assess the regeneration of bone in the extracted third molar sockets using xenograft (CollaPlugTN-Zimmer which was compared with the normal healing on the contra lateral side. The assessment was done to analyze post-operative healing complications and to compare the bone density formed between control site and implant site radiologically. Conclusion: On this basis of this study, the use of collaplugTN appears to be beneficial to the patient in postoperative wound healing and also for better bone formation. The use of this material was advantageous because of its simplicity of application cost effectiveness and availability. There is enhanced wound healing and early bone formation.

  10. Assessment of Regeneration of Bone in the Extracted Third Molar Sockets Augmented Using Xenograft (CollaPlugTN Zimmer) in Comparison with the Normal Healing on the Contralateral Side.

    Science.gov (United States)

    Ranganathan, Murugan; Balaji, M; Krishnaraj, R; Narayanan, Vivek; Thangavelu, Annamalai

    2017-11-01

    Alveolar bone resorption is a significant clinical problem. Bone loss in third molar region following extraction or surgical removal not only leads to periodontal problems in second molar region but also it may lead to some serious problems like increased incidence of angle fractures. In order to reduce the risks following third molar surgery, the socket should be augmented with bone grafts. In recent days guided tissue regeneration is the most accepted and successful technique followed many authors and its efficacy has been proved. Based upon our clinical experience, the use of bio absorbable collagen wound dressing such as CollaPlug TN has achieved quick healing and more primary wound coverage. Amongst the graft materials collagen is preferable due to its high biocompatibility and hemostatic ability. This study was done to assess the regeneration of bone in the extracted third molar sockets using xenograft (CollaPlug TN -Zimmer) which was compared with the normal healing on the contra lateral side. The assessment was done to analyze post-operative healing complications and to compare the bone density formed between control site and implant site radiologically. On this basis of this study, the use of collaplugTN appears to be beneficial to the patient in postoperative wound healing and also for better bone formation. The use of this material was advantageous because of its simplicity of application cost effectiveness and availability. There is enhanced wound healing and early bone formation.

  11. Soft tissue healing in alveolar socket preservation technique: histologic evaluations.

    Science.gov (United States)

    Pellegrini, Gaia; Rasperini, Giulio; Obot, Gregory; Farronato, Davide; Dellavia, Claudia

    2014-01-01

    After tooth extraction, 14 alveolar sockets were grafted with porous bovine bone mineral particles and covered with non-cross-linked collagen membrane (test group), and 14 alveolar sockets were left uncovered. At 5 and 12 weeks, microvascular density (MVD), collagen content, and amount of lymphocytes (Lym) T and B were analyzed in soft tissue. At 5 weeks, MVD was significantly lower and Lym T was significantly higher in tests than in controls (P healing process of the soft tissue.

  12. Oral health-related quality of life changes after placement of immediately loaded single implants in healed alveolar ridges or extraction sockets: a 5-year prospective follow-up study.

    Science.gov (United States)

    Raes, Stefanie; Raes, Filiep; Cooper, Lyndon; Giner Tarrida, Luis; Vervaeke, Stijn; Cosyn, Jan; De Bruyn, Hugo

    2017-06-01

    The impact of single implants on oral health-related quality of life (OHRQoL) is scarcely investigated, especially when combined with immediate placement and loading in extraction sockets. The aim was to describe prospectively the changes of OHRQoL with single implants placed in the esthetic zone in healed ridges or in extraction sockets after 5 years. Ninety-six patients, enrolled at three clinical centers, received 102 single implants placed in a healed ridge (n = 54 implants/50 patients) or in extraction sockets (n = 48 implants/46 patients). Implants were immediately provisionalized, and permanent crowns were cemented after 12 weeks. Oral health impact profile questionnaires (OHIP-14) were completed before surgery, after 1 (provisional crown), 6 (permanent crown), 12 and 60 months, respectively. The overall OHIP-14 score pertains to seven domains with two items each and was assessed on a Likert scale of 0-4 (0 = never and 4 = very often). The evolution of the total OHIP-14 score and changes within all OHIP domains over time and between groups were assessed with a linear mixed-effect model analysis. After 5 years, overall implant survival was 98%. The total OHIP-14 score for both groups combined decreased from 0.50 at baseline to 0.17 at 6 months (P < 0.001), indicative of improvement. For both groups, this remained stable up to 5 years (P = 0.41). However, after 5 years, the total OHIP-14 score revealed a statistically significantly higher improvement in the healed group compared with the extraction group (P = 0.027). Missing a single tooth in the maxillary esthetic zone leads to limited OHRQoL problems as reflected by a low overall OHIP score. However, OHRQoL improves less in the extraction group, reflecting that replacing a missing tooth is perceived as more beneficial than replacing a present tooth. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  13. The effect of cancer therapies on pediatric anophthalmic sockets.

    Science.gov (United States)

    Shildkrot, Yevgeniy; Kirzhner, Maria; Haik, Barrett G; Qaddoumi, Ibrahim; Rodriguez-Galindo, Carlos; Wilson, Matthew W

    2011-12-01

    To determine the impact of chemotherapy or external beam radiotherapy (EBRT) on pediatric anophthalmic sockets. A retrospective, nonrandomized, interventional cohort study. A total of 135 sockets of 133 children undergoing enucleation from late 1999 to early 2009 at the St. Jude Children's Research Hospital were included. A retrospective chart review of outcomes after enucleation in patients treated with systemic chemotherapy or orbital EBRT either before or after removal of the eye compared with patients who received no other treatment. Incidence of implant exposure, migration, extrusion, socket contracture, and pyogenic granuloma formation. Retinoblastoma was the primary diagnosis in 128 eyes (95%). Median follow-up was 3.6 years (range, 0.1-9.3 years). Event-free course was observed in 94 sockets (69.6%). Complications included implant exposure (n = 28, 20.7%), socket contracture (n = 16, 11.9%), pyogenic granuloma (n = 9, 6.7%), implant extrusion (n = 3, 2.2%), and migration (n = 2, 1.5%). Exposure resolved in 21 sockets (77.8%) and improved in 2 sockets (11.1%); 1 patient with exposure died. Use of prior, adjuvant, or subsequent chemotherapy increased the long-term risk of exposure (odds ratio [OR] = 3.7; 95% confidence interval [CI], 1.4-9.4), and contracture (OR could not be calculated, Psocket contracture. The author(s) have no proprietary or commercial interest in any materials discussed in this article. Copyright © 2011 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

  14. Papaya Extract to Treat Dengue: A Novel Therapeutic Option?

    African Journals Online (AJOL)

    review of available literature regarding the use of the papaya leaf extract for the treatment of ... there are no effective antiviral agents available to treat dengue complications. .... A study in the journal of Medicinal and Aromatic Plants reported an ...

  15. Sockets and Pebbles

    Science.gov (United States)

    1997-01-01

    This close-up Sojourner rover image of a small rock shows that weathering has etched-out pebbles to produce sockets. In the image, sunlight is coming from the upper left. Sockets (with shadows on top) are visible at the lower left and pebbles (with bright tops and shadowed bases) are seen at the lower center and lower right. Two pebbles (about 0.5 cm across) are visible at the lower center.Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology (Caltech).

  16. Socket welds in nuclear facilities

    International Nuclear Information System (INIS)

    Anderson, P.A.; Torres, L.L.

    1995-01-01

    Socket welds are easier and faster to make than are butt welds. However, they are often not used in nuclear facilities because the crevices between the pipes and the socket sleeves may be subject to crevice corrosion. If socket welds can be qualified for wider use in facilities that process nuclear materials, the radiation exposures to welders can be significantly reduced. The current tests at the Idaho Chemical Processing Plant (ICPP) are designed to determine if socket welds can be qualified for use in the waste processing system at a nuclear fuel processing plant

  17. Three-Dimensional Volumetric Changes in Severely Resorbed Alveolar Sockets After Ridge Augmentation with Bovine-Derived Xenograft and Resorbable Barrier: A Preliminary Study on CBCT Imaging.

    Science.gov (United States)

    Manavella, Valeria; Romano, Federica; Corano, Lisa; Bignardi, Cristina; Aimetti, Mario

    The primary aim of the study was to describe a novel technique to evaluate volumetric hard tissue dimensional changes after ridge augmentation procedures. The secondary aim was to apply this newly developed measuring method to compromised alveolar sockets grafted with a slowly resorbing biomaterial covered with a collagen membrane. Eleven patients (6 men and 5 women, mean age 52.7 ± 8.3 years) requiring extraction of one hopeless tooth for severe periodontitis in the maxillary anterior area were consecutively treated with a ridge augmentation procedure. All experimental sockets showed advanced buccal bone plate deficiency and were grafted with deproteinized bovine bone mineral with 10% collagen covered with a collagen membrane. Sockets healed by secondary intention. Three-dimensional volumetric alveolar bone changes were calculated by superimposing cone beam computed tomography scans obtained before and 12 months after the augmentation procedure. After 12 months, the alveolar mineralized tissue filled 91.20% ± 7.96% of the maximum volume for regeneration. The augmentation procedure appeared not only to compensate for bone remodeling in most alveolar regions but also to repair a significant portion of the buccal wall. The most significant ridge width changes occurred 1 mm apical to the bone crest (2.33 ± 1.46 mm, P socket volume. A ridge preservation technique performed with collagenated bovine bone and a collagen membrane was able to improve ridge shape and dimensions in compromised alveolar sockets.

  18. Immediate Placement of Ultrawide-Diameter Implants in Molar Sockets: Description of a Recommended Technique.

    Science.gov (United States)

    Hattingh, André C; De Bruyn, Hugo; Ackermann, Andrew; Vandeweghe, Stefan

    Immediate implant placement is performed less frequently in molar extraction sockets than in single root sockets. This is mainly due to the tripodal anatomical configuration of molar roots, which is perceived as complex and therefore unsuitable. The mechanical burden of molar sites, combined with much larger socket dimensions, make it amenable to the use of ultrawide-diameter dental implants. This article describes a practical, sequenced technique that can be used predictably for immediate implant placement in maxillary and mandibular first molar sockets, using a dry skull model for clarification. This detailed description is based on the experience of more than 580 clinical cases over a 10-year period.

  19. Gas from the wall socket

    International Nuclear Information System (INIS)

    Vermeer, B.

    1997-01-01

    A Dutch public utility (Obragas) introduces a new way to supply gas for their household clients in Helmond, Netherlands: the gas wall socket. The use of gas wall sockets must prevent the decrease of the market share for natural gas compared to the market share of electricity for households

  20. Immediate Placement of Ultrawide-Diameter Implants in Molar Sockets: Description of a Recommended Technique

    NARCIS (Netherlands)

    Hattingh, A.C.; Bruyn, H. de; Ackermann, A.; Vandeweghe, S.

    2018-01-01

    Immediate implant placement is performed less frequently in molar extraction sockets than in single root sockets. This is mainly due to the tripodal anatomical configuration of molar roots, which is perceived as complex and therefore unsuitable. The mechanical burden of molar sites, combined with

  1. Effect of irradiation-timing on the initial socket healing in rats

    International Nuclear Information System (INIS)

    Horn, Y.; Sela, M.N.; Shlomi, B.; Ulmansky, M.; Sela, J.; Hebrew Univ., Jerusalem

    1979-01-01

    The effect of a single dose of 1500 R on early postextraction socket healing was studied in jaws of rats. A severe delay in healing was found in animals irradiated 2 weeks prior to extraction. Retardation of healing to a lesser degree was demonstrated in sockets irradiated immediately after exodontia. (author)

  2. Production of anticandidal cotton textiles treated with oak gall extract

    Directory of Open Access Journals (Sweden)

    Ahmed A. Tayel

    Full Text Available Candida albicans, one of the most dreadful fungal pathogens threatening humans, could not be easily prevented. The anticandidal activity of oak gall extract, Quercus infectoria (QIE, was investigated as a potential natural alternative to synthetic and chemical fungicides. QIE anticandidal potentiality was confirmed using both qualitative and quantitative assays. Cotton textiles were treated with QIE and then evaluated as anticandidal fabrics. QIE-treated textiles had a potent anticandidal activity, which could completely inhibit the inoculated C. albicans cells. The durability of anticandidal activity in QIE-treated textiles almost completely disappeared after the fourth laundering cycle. QIE could be recommended, however, as a potent anticandidal agent for preparing antiseptic solutions and emulsions and as a finishing agent for manufacturing anticandidal disposable diapers and hygienic clothes.

  3. Strength evaluation of prosthetic check sockets, copolymer sockets, and definitive laminated sockets.

    Science.gov (United States)

    Gerschutz, Maria J; Haynes, Michael L; Nixon, Derek; Colvin, James M

    2012-01-01

    A prosthesis encounters loading through forces and torques exerted by the person with amputation. International Organization for Standardization (ISO) standard 10328 was designed to test most lower-limb prosthetic components. However, this standard does not include prosthetic sockets. We measured static failure loads of prosthetic sockets using a modified ISO 10328 and then compared them with the criteria set by this standard for other components. Check socket (CS) strengths were influenced by thickness, material choice, and fabrication method. Copolymer socket (CP) strengths depended on thickness and fabrication methods. A majority of the CSs and all of the CPs failed to pass the ISO 10328 ductile loading criterion. In contrast, the strengths of definitive laminated sockets (DLs) were influenced more by construction material and technique. A majority of the DLs failed to pass the ISO 10328 brittle loading criterion. Analyzing prosthetic sockets from a variety of facilities demonstrated that socket performance varies considerably between and within facilities. The results from this article provide a foundation for understanding the quality of prosthetic sockets, some insight into possible routes for improving the current care delivered to patients, and a comparative basis for future technology.

  4. Tensile strength and impact resistance properties of materials used in prosthetic check sockets, copolymer sockets, and definitive laminated sockets

    OpenAIRE

    Maria J. Gerschutz, PhD; Michael L. Haynes, MS; Derek M. Nixon, BS; James M. Colvin, MS

    2011-01-01

    Prosthetic sockets serve as the interface between people with amputations and their prostheses. Although most materials used to make prosthetic sockets have been used for many years, knowledge of these materials' properties is limited, especially after they are subjected to fabrication processes. This study evaluated tensile and impact properties of the current state-of-the-art materials used to fabricate prosthetic check sockets, copolymer sockets, and definitive laminated sockets. Thermolyn...

  5. The effects of healing abutments of different size and anatomic shape placed immediately in extraction sockets on peri-implant hard and soft tissues. A pilot study in foxhound dogs.

    Science.gov (United States)

    López-López, Patricia J; Mareque-Bueno, Javier; Boquete-Castro, Ana; Aguilar-Salvatierra Raya, Antonio; Martínez-González, José M; Calvo-Guirado, José L

    2016-01-01

    The aim of this animal study was to compare the effects of narrow, concave-straight and wide anatomic healing abutments on changes to soft tissues and crestal bone levels around implants immediately placed into extraction sockets in foxhound dogs. Forty-eight titanium implants (Bredent Medical GMBH, Germany) of the same dimensions were placed in six foxhound dogs. They were divided into two groups (n = 24): test (implants with anatomic abutment) and control (implants with concave-straight abutment). The implants were inserted randomly in the post extraction sockets of P2 , P3 , P4, and M1 bilaterally in six dogs. After eight and twelve weeks, the animals were sacrificed and samples extracted containing the implants and the surrounding soft and hard tissues. Soft tissue and crestal bone loss (CBL) were evaluated by histology and histomorphometry. All implants were clinically and histologically osseointegrated. Healing patterns were examined microscopically at eight and twelve weeks. After eight and twelve weeks, for hard tissues, the distance from the implant shoulder to the first bone-to-implant contact (IS-C) was higher for control group in the lingual aspect with statistical significance (P < 0.05). For soft tissues (STL), the distance from the top of the peri-implant mucosa to the apical portion of the junction epithelium (PM-Je) was significantly less on the lingual aspect in the test group (with wider abutment) at eight and twelve weeks (P < 0.05). The distance from the top of the apical portion of the junction epithelium to the first bone-to-implant contact (Je-C) was significantly higher in the test group (wider abutment) in the lingual aspect at eight and twelve weeks (P < 0.05). There was no connective tissue contact with any abutment surface. Within the limitations of this animal study, anatomic healing abutments protect soft and hard tissues and reduce crestal bone resorption compared with concave-straight healing abutments. © 2014 John Wiley

  6. The influence of Aloe vera and xenograft XCB toward of bone morpho protein 2 BMP2 expression and amount of osteoblast of alveolar bone induced into tooth extraction sockets Cavia cobaya

    Directory of Open Access Journals (Sweden)

    Utari Kresnoadi

    2014-12-01

    Full Text Available Tooth extraction can cause inflammation leading to alveolar ridge resorption. In addition, prominent ridge has crucial role for making denture su-ccessfully. Thus, socket preservation is needed to prevent greater alveolar ridge resorption. An innovative material, a combination of Aloe vera and xe-nograft (XCB, is then considered as a biogenic stimulator that can reduce inflammation, as a result, the growth of alveolar bone is expected to be impro-ved. This research is aimed to prove whether the mixture of Aloe vera and xenograft can stimulate BMP2 and increase osteoblasts. Forty-eight Cavia co-baya animals were divided into eight groups each of which consisted of six animals. The mandibular incisors of those Cavia cobaya animals were then extracted and filled with PEG as Group Control, XCB as Group XCB, Aloe vera as Group Aloe vera, and a combination of Aloe vera +XCB as Group Aloe vera +XCB. Next, the first four groups were sacrificed seven days after extraction, and the second four groups were sacrificed 30 days after extrac-tion. And then, immunohistochemical and histopathology examinations were conducted to examine BMP2 expression and osteoblasts. Based on the re-sult known that the mixture of Aloe vera and xenograft can increase BMP2 expression and amount of osteoblasts. It can be concluded that the mixture of Aloe vera and xenograft can increase BMP2 expression and amount of osteoblast cel . It can be used as an alternative material to increase the growth of alveolar bone after extraction.

  7. [Betamethasone and aqueous extract of Arctium lappa for treating angiostrongyliasis].

    Science.gov (United States)

    Fante, Camila Argenta; Dieterish, Solange; Rodriguez, Rubens

    2008-01-01

    Angiostrongylus costaricensis is a parasite that causes abdominal angiostrongyliasis in humans. The treatment for it includes the use of anti-inflammatory drugs, despite the lack of studies to justify this approach. The objective of this paper was to evaluate the effect of betamethasone and Arctium lappa on the evolution of intestinal lesions induced by this parasite. Adult male Swiss mice were used, distributed into four groups: infected and treated with betamethasone; infected and treated with Arctium lappa; infected and not treated; and control group. The treatments were started on the 15th day after infection and continued for 15 days. The presence of eosinophilic infiltration and granuloma was evaluated (1-mild; 2-moderate; 3-severe). Betamethasone allowed the lesions to evolve into more severe forms, while the extract did not interfere with disease progression. The substances applied were ineffective for protection against the lesions induced by Angiostrongylus costaricensis in mice. These findings discourage the use of betamethasone and Arctium lappa for humans affected by abdominal angiostrongyliasis.

  8. Tensile strength and impact resistance properties of materials used in prosthetic check sockets, copolymer sockets, and definitive laminated sockets.

    Science.gov (United States)

    Gerschutz, Maria J; Haynes, Michael L; Nixon, Derek M; Colvin, James M

    2011-01-01

    Prosthetic sockets serve as the interface between people with amputations and their prostheses. Although most materials used to make prosthetic sockets have been used for many years, knowledge of these materials' properties is limited, especially after they are subjected to fabrication processes. This study evaluated tensile and impact properties of the current state-of-the-art materials used to fabricate prosthetic check sockets, copolymer sockets, and definitive laminated sockets. Thermolyn Rigid and Orfitrans Stiff check socket materials produced significantly lower tensile strength and impact resistance than polyethylene terephthalate glycol (PETG). Copolymer socket materials exhibited greater resistance to impact forces than the check socket materials but lower tensile strengths than PETG. The heated molding processes, for the check socket and copolymer materials, reduced both tensile strength and elongation at break. Definitive laminated sockets were sorted according to fabrication techniques. Nyglass material had significantly higher elongation, indicating a more ductile material than carbon-based laminations. Carbon sockets with pigmented resin had higher tensile strength and modulus at break than nonpigmented carbon sockets. Elongation at yield and elongation at break were similar for both types of carbon-based laminations. The material properties determined in this study provide a foundation for understanding and improving the quality of prosthetic sockets using current fabrication materials and a basis for evaluating future technologies.

  9. Clinical and histologic outcomes of calcium sulfate in the treatment of postextraction sockets.

    Science.gov (United States)

    Ruga, Emanuele; Gallesio, Cesare; Chiusa, Luigi; Boffano, Paolo

    2011-03-01

    The aim of this prospective study was to assess the clinical and histologic outcomes obtained with calcium sulfate (CS) used as a filler material in fresh premolar and molar postextraction sockets. Sixty premolar or molar postextraction sockets were filled with CS. Among the 60 grafted sockets, after 3 months, 50 underwent implant placement and clinical assessment. The removal of a sample core of newly generated intrasocket tissue was performed in 19 sockets. Collected samples were sent for histologic examination. The percentage of vital bone, nonvital bone, residual CS, amorphous material, and connective areas in every sample was calculated and recorded. Fifty postextraction regenerated sockets that underwent implant placement 3 months after tooth removal were included in this study.A partial postoperative exposition of the graft was observed in 12 of 50 sockets. At the surgical reentry, the augmented extraction sockets were completely filled by a hard material with an adequate alveolar crest in 41 cases. Histologic examination of the cores revealed that 63.16% of the intrasocket tissue was new vital bone, 2.1% was nonvital bone, 4.74% was fibrous tissue, and 30% was amorphous material. No residual CS was identified in bone cores. This study confirmed that CS is an ideal grafting material. The clinical adequacy aspect of filled sockets at surgical reentry seemed to be indicative of a qualitatively better bone regeneration. Postoperative exposition of graft material after a first intervention seemed to constitute an important risk factor for a worse bone regeneration.

  10. A novel image processing technique for 3D volumetric analysis of severely resorbed alveolar sockets with CBCT.

    Science.gov (United States)

    Manavella, Valeria; Romano, Federica; Garrone, Federica; Terzini, Mara; Bignardi, Cristina; Aimetti, Mario

    2017-06-01

    The aim of this study was to present and validate a novel procedure for the quantitative volumetric assessment of extraction sockets that combines cone-beam computed tomography (CBCT) and image processing techniques. The CBCT dataset of 9 severely resorbed extraction sockets was analyzed by means of two image processing software, Image J and Mimics, using manual and automated segmentation techniques. They were also applied on 5-mm spherical aluminum markers of known volume and on a polyvinyl chloride model of one alveolar socket scanned with Micro-CT to test the accuracy. Statistical differences in alveolar socket volume were found between the different methods of volumetric analysis (Psockets showed more accurate results, excellent inter-observer similarity and increased user friendliness. The clinical application of this method enables a three-dimensional evaluation of extraction socket healing after the reconstructive procedures and during the follow-up visits.

  11. Comparing the effects of chlorhexidine and persica on alveolar bone healing following tooth extraction in rats, a randomised controlled trial.

    Science.gov (United States)

    Dorri, Mojtaba; Shahrabi, Shokufeh; Navabazam, Alireza

    2012-02-01

    Chlorhexidine is broadly prescribed by clinicians for treating extraction socket wounds; however, studies have reported adverse effects for chlorhexidine. Persica, a herbal antibacterial agent, could be an alternative for chlorhexidine. The aim of this randomised controlled trial was to investigate the effects of persica and chlorhexidine on alveolar bone healing following tooth extraction in rats. Eighteen Wistar rats were randomly allocated to three study groups: 0.2% chlorhexidine, 10% persica and controls (tap water). The rats were mouth-rinsed for 14 days. On day 8, the mandibular right first molars of all the rats were extracted. On day 21, the rats were euthanized and histological slides of their extraction sockets were prepared. The amount of new bone formation and the number of inflammatory cells in the extraction socket for each rat were recorded. Data were analysed using linear regression and Mann-Whitney tests. There was no significant difference between the control group and the intervention groups in terms of new bone formation and inflammatory cell count. The mean new bone formation was significantly higher in the persica group than in the chlorhexidine group. There was a significant association between new bone formation and inflammatory cell count in the entire sample. In conclusion, there were no significant differences between rinsing with tap water and rinsing with 0.2% chlorhexidine and 10% persica in enhancing extraction socket wound healing in rats. Extraction socket wound healing in rats was better enhanced with 10% persica than 0.2% chlorhexidine.

  12. Histologic study of use of microfibrillar collagen hemostat in rat dental sockets

    Directory of Open Access Journals (Sweden)

    Magro-Érnica Natasha

    2003-01-01

    Full Text Available The aim of this paper was to evaluate if the placement of microfibrillar collagen hemostat (MCH into a dental socket interfered with healing. General anesthesia was administered to 30 adult male Albinus Wistar rats and the maxillary right central incisor was extracted. In the control group after each tooth was extracted, the socket was sutured. In the MCH group after each tooth was extracted, MCH was placed into the socket before suturing. Postoperatively, 5 animals were sacrificed from each group at 7, 21 and 28 days. The right maxilla was removed from each animal and histologic slides were stained with Masson's trichromic and hematoxylin and eosin. Quantitative and qualitative analyses were done. The percentage of bone area in the dental socket was quantified using the Image Lab 98 image analysis system. The bone area formation for the control and MCH groups was: 8.1% and 3.3% at 7 days, 34.4% and 33% at 21 days and 41% and 41.3% at 28 days, respectively. We concluded that MCH interferes with the beginning of dental socket healing but does not interfere with the final healing of the dental socket.

  13. Soft tissue behavior around dental implants placed in fresh extraction sockets and immediately restored in esthetic area: a preliminary short-term evaluation

    Directory of Open Access Journals (Sweden)

    Ronaldo Antonio BRESCOVITT

    2017-08-01

    Full Text Available Abstract Objective To assess the behavior of the peri-implant soft margin after immediate implant placement with immediate function, by (1 direct clinical measurements of peri-implant soft margin height and thickness, (2 measurements of peri-implant soft margin height on photographs and (3 the perception of dental professionals regarding the results considering esthetic parameters. Material and method The study included 8 patients with central or lateral incisors indicated to be extracted. Direct measurements of peri-implant soft margin height and thickness were done immediately before extraction (T0 and 1 (T1, 4 (T2, 8 (T3 and 12 (T4 months after the flapless insertion of the implant. Photographs were taken at the same time intervals. A questionnaire was filled in by implantology professionals regarding their visual perception of color and peri-implant soft margin architecture and harmony in the implant region using the photographs obtained at T4. Result The clinical results showed significant changes to the height of the peri-implant soft margin, but the photographic results did not show significant changes for this measurement. The thickness of the attached gingiva was maintained during all the observation period. Of the professionals interviewed, 35.2% noticed an altered peri-implant soft margin color of the implant region, 39.8% noticed a change in the peri-implant soft margin architecture and 12.5% noticed a change in the peri-implant soft margin harmony. Conclusion The soft tissues around immediate implants changed during this period, but did not affect the aesthetic outcome and in the opinion of professionals, the aesthetic results were satisfactory for these cases.

  14. Dimensional Changes of Fresh Sockets With Reactive Soft Tissue Preservation: A Cone Beam CT Study.

    Science.gov (United States)

    Crespi, Roberto; Capparé, Paolo; Crespi, Giovanni; Gastaldi, Giorgio; Gherlone, Enrico Felice

    2017-06-01

    The aim of this study was to assess dimensional changes of the fresh sockets grafted with collagen sheets and maintenance of reactive soft tissue, using cone beam computed tomography (CBCT). Tooth extractions were performed with maximum preservation of the alveolar housing, reactive soft tissue was left into the sockets and collagen sheets filled bone defects. Cone beam computed tomography were performed before and 3 months after extractions. One hundred forty-five teeth, 60 monoradiculars and 85 molars, were extracted. In total, 269 alveoli were evaluated. In Group A, not statistically significant differences were found between monoradiculars, whereas statistically significant differences (P 0.05) for all types of teeth. This study reported an atraumatic tooth extraction, reactive soft tissue left in situ, and grafted collagen sponge may be helpful to reduce fresh socket collapse after extraction procedures.

  15. Angle Class I malocclusion treated with lower incisor extraction.

    Science.gov (United States)

    Barbosa, Vanessa Leal Tavares

    2013-01-01

    In planning orthodontic cases that include extractions as an alternative to solve the problem of negative space discrepancy, the critical decision is to determine which teeth will be extracted. Several aspects must be considered, such as periodontal health, orthodontic mechanics, functional and esthetic alterations, and treatment stability. Despite controversies, extraction of teeth to solve dental crowding is a therapy that has been used for decades. Premolar extractions are the most common, but there are situations in which atypical extractions facilitate mechanics, preserve periodontal health and favor maintenance of the facial profile, which tends to unfavorably change due to facial changes with age. The extraction of a lower incisor, in selected cases, is an effective approach, and literature describes greater post-treatment stability when compared with premolar extractions. This article reports the clinical case of a patient with Angle Class I malocclusion and upper and lower anterior crowding, a balanced face and harmonious facial profile. The presence of gingival and bone recession limited large orthodontic movements. The molars and premolars were well occluded, and the discrepancy was mainly concentrated in the anterior region of the lower dental arch. The extraction of a lower incisor in the most ectopic position and with compromised periodontium, associated with interproximal stripping in the upper and lower arches, was the alternative of choice for this treatment, which restored function, providing improved periodontal health, maintained facial esthetics and allowed finishing with a stable and balanced occlusion. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO), as part of the requirements for obtaining the BBO Diplomate title.

  16. Ficus septica plant extracts for treating Dengue virus in vitro

    Directory of Open Access Journals (Sweden)

    Nan-Chieh Huang

    2017-06-01

    Full Text Available Dengue virus types 1-4 (DENV-1-4 are positive-strand RNA viruses with an envelope that belongs to the Flaviviridae. DENV infection threatens human health worldwide. However, other than supportive treatments, no specific therapy is available for the infection. In order to discover novel medicine against DENV, we tested 59 crude extracts, without cytotoxicity, from 23 plants in vitro; immunofluorescence assay revealed that the methanol extracts of fruit, heartwood, leaves and stem from Ficus septica Burm. f. had a promising anti-DENV-1 and DENV-2 effect. However, infection with the non-envelope picornavirus, Aichi virus, was not inhibited by treatment with F. septica extracts. F. septica may be a candidate antiviral drug against an enveloped virus such as DENV.

  17. Small Bore Piping Socket Weld Evaluation System

    International Nuclear Information System (INIS)

    Lee, Dong Min; Cho, Hong Seok; Choi, Sang Hoon; Cho, Ki Hyun; Lee, Jang Wook

    2009-01-01

    Kori unit 3 had stopped operation due to leakage at Steam Generator drain line socket weld on June 6, 2008. The Cause of socket weld damage was known as a fatigue crack. According to this case, all socket welds located in RCS pressure boundary are carrying out Radiographic Testing. But to inspect socket welds by RT has some problems. The result of EPRI study showed that RT has limitation to find flaws at socket welds.The orientation of flaws has big influence on RT inspection capability and there is not enough space at socket welds for RT, dose problems as well. Although the gap between coupling and pipe at socket welds must follow up code, surface inspection can't inspect the gap. If there is absence of the gap, socket welds are damaged during operation. The gap should be identified by RT but the distance of gap can't be measured. As this paper, the ultrasonic inspection system was introduced to figure out indication and gap in the socket welds

  18. Impact of Ellagic Acid in Bone Formation after Tooth Extraction: An Experimental Study on Diabetic Rats

    Directory of Open Access Journals (Sweden)

    Mazen M. Jamil Al-Obaidi

    2014-01-01

    Full Text Available Objectives. To estimate the impact of ellagic acid (EA towards healing tooth socket in diabetic animals, after tooth extraction. Methods. Twenty-four Sprague Dawley male rats weighing 250–300 g were selected for this study. All animals were intraperitoneally injected with 45 mg/kg (b.w. of freshly prepared streptozotocin (STZ, to induce diabetic mellitus. Then, the animals were anesthetized, and the upper left central incisor was extracted and the whole extracted sockets were filled with Rosuvastatin (RSV. The rats were separated into three groups, comprising 8 rats each. The first group was considered as normal control group and orally treated with normal saline. The second group was regarded as diabetic control group and orally treated with normal saline, whereas the third group comprised diabetic rats, administrated with EA (50 mg/kg orally. The maxilla tissue stained by eosin and hematoxylin (H&E was used for histological examinations and immunohistochemical technique. Fibroblast growth factor (FGF-2 and alkaline phosphatase (ALP were used to evaluate the healing process in the extracted tooth socket by immunohistochemistry test. Results. The reactions of immunohistochemistry for FGF-2 and ALP presented stronger expression, predominantly in EA treated diabetic rat, than the untreated diabetic rat. Conclusion. These findings suggest that the administration of EA combined with RSV may have accelerated the healing process of the tooth socket of diabetic rats, after tooth extraction.

  19. Angle Class II malocclusion treated with extraction of permanent teeth

    Directory of Open Access Journals (Sweden)

    Gustavo Mattos Barreto

    2013-08-01

    Full Text Available Angle Class II malocclusion associated with anterior open bite in adult patients demands a carefully elaborated orthodontic planning, aiming at restoring not only harmonious dental and facial esthetics, but also a balanced masticatory function. Orthognathic surgery or permanent teeth extraction are often the choice of treatment, therefore, treatment decision is related to all dental, skeletal and functional aspects. The present report discusses orthodontic compensation carried out by means of upper premolar extraction performed to correct the Class II canine relationship and, consequently, the anterior open bite, accepting that the upper incisors be retroclined. This clinical case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as part of the requirements for obtaining the BBO Certification.

  20. SSL - THE SIMPLE SOCKETS LIBRARY

    Science.gov (United States)

    Campbell, C. E.

    1994-01-01

    The Simple Sockets Library (SSL) allows C programmers to develop systems of cooperating programs using Berkeley streaming Sockets running under the TCP/IP protocol over Ethernet. The SSL provides a simple way to move information between programs running on the same or different machines and does so with little overhead. The SSL can create three types of Sockets: namely a server, a client, and an accept Socket. The SSL's Sockets are designed to be used in a fashion reminiscent of the use of FILE pointers so that a C programmer who is familiar with reading and writing files will immediately feel comfortable with reading and writing with Sockets. The SSL consists of three parts: the library, PortMaster, and utilities. The user of the SSL accesses it by linking programs to the SSL library. The PortMaster initializes connections between clients and servers. The PortMaster also supports a "firewall" facility to keep out socket requests from unapproved machines. The "firewall" is a file which contains Internet addresses for all approved machines. There are three utilities provided with the SSL. SKTDBG can be used to debug programs that make use of the SSL. SPMTABLE lists the servers and port numbers on requested machine(s). SRMSRVR tells the PortMaster to forcibly remove a server name from its list. The package also includes two example programs: multiskt.c, which makes multiple accepts on one server, and sktpoll.c, which repeatedly attempts to connect a client to some server at one second intervals. SSL is a machine independent library written in the C-language for computers connected via Ethernet using the TCP/IP protocol. It has been successfully compiled and implemented on a variety of platforms, including Sun series computers running SunOS, DEC VAX series computers running VMS, SGI computers running IRIX, DECstations running ULTRIX, DEC alpha AXPs running OSF/1, IBM RS/6000 computers running AIX, IBM PC and compatibles running BSD/386 UNIX and HP Apollo 3000

  1. Papaya extract to treat dengue: a novel therapeutic option? | Sarala ...

    African Journals Online (AJOL)

    Dengue is a viral disease that today affects a vast number of people in over 125 countries and is responsible for a sizable number of deaths. In the absence of an effective antiviral drug to treat the disease, various treatments are being investigated. Studies have indicated that the juice of the leaves of the Carica papaya plant ...

  2. Potential for Osseous Regeneration of Platelet-Rich Fibrin-A Comparative Study in Mandibular Third Molar Impaction Sockets.

    Science.gov (United States)

    Varghese, Mathew P; Manuel, Suvy; Kumar L K, Surej

    2017-07-01

    This study investigated the potential of platelet-rich fibrin (PRF) for osseous regeneration and soft tissue healing in mandibular third molar impaction sockets. A prospective in vivo study was performed. Randomization was performed after extraction. On one side, the socket was sutured primarily (control site); on the other side, autologous PRF gel was placed and then the socket was sutured (test site). Postoperatively, grid periapical radiographs were obtained at periodic intervals (weeks 1, 4, and 16) and digitalized. Gray-level values were measured at 3 different regions of the socket (for regions of newly formed bone) compared with the natural bone area using HL Image++ software, and the percentage bone fill was measured. Clinical evaluation of soft tissue healing was performed using the healing index of Landry et al (J Periodontol 60:212, 1994) at the specific intervals. Thirty healthy men and women (age range, 18 to 35 yr) with bilaterally impacted mandibular third molars were enrolled in this study. In general, there was markedly greater bone formation in sockets treated with PRF (P < .05). In the PRF group, the average gray-level values at the cervical, middle, and apical regions were 61.85 (standard deviation [SD], ±25.186), 64.54 (SD, ±24.831), and 67.80 (SD, ±23.946), respectively, with a mean value of 64.73 (SD, ±24.411). In the control group, these values were 51.58 (SD, ±15.286), 54.30 (SD, ±16.274), and 57.53 (SD, ±16.187), respectively, with a mean of 53.67 (SD, ±16.528). The average percentage of bone fill in the PRF group was 57.90 (SD, ±26.789) and that of the non-PRF group was 46.74 (SD, ±17.713; P < .05). Soft tissue healing as evaluated by the healing index of Landry et al also was found to be better at the PRF test site and it was statistically significant (P < .05). There was evidence for better osseous regeneration and soft tissue healing in response to PRF. Further investigations to evaluate the application of PRF in other

  3. Immediate implants placed in fresh sockets associated to periapical infectious processes. A systematic review

    Science.gov (United States)

    Álvarez-Camino, Juan C.; Valmaseda-Castellón, Eduard

    2013-01-01

    Objetives: The development of treated implant surfaces, added to the increase of the aesthetic requirements by the patients has led to a change in the treatment protocols as well as the development of techniques such as the one-fase implants and the immediate prosthetic loading. One of the usual contraindications of the implant treatment is the presence of periapical disease associated to the tooth to be replaced. The aim of this paper is to review the published literature on immediate implant placement in extraction sockets of teeth with periapical pathology, considering the level of scientific evidence, and following the principles of medicine and evidence-based Dentistry. Material and Methods: A search of articles published between 1982 and 2012 was conducted. The search terms immediate, dental implant, extraction, infected, periapical pathology were used. Search was limited to studies in animals and humans, published in english language. Results: 16 articles were selected from a total of 438, which were stratified according to their level of scientific evidence using the SORT criteria (Strength of Recommendation Taxonomy). Studies in both animals and humans presented high rates of implant survival, but human studies are limited to a small number of cases. Discussion and Conclusions: There is a limited evidence regarding implant placement immediately to the extraction of teeth affected by chronic periapical pathology. Following analysis of the articles, and in function of their scientific quality, a type B recommendation is given in favor of the immediate implant placement in fresh sockets associated to periapical infectious processes. Key words:Immediate implant, periapical pathology. PMID:23722139

  4. Fatigue tests of dowel-socket systems

    International Nuclear Information System (INIS)

    Chiang, D.D.

    1976-01-01

    A test program was conducted to determine the fatigue behavior of LHTGR fuel element dowel/socket systems. Two dowel/socket systems, namely, a four-dowel system and a five-dowel system, were tested to failure under shear loads applied through a fatigue test apparatus to simulate repetitive loading during a seismic event

  5. Extracting silica from rice husk treated with potassium permanganate

    International Nuclear Information System (INIS)

    Javed, S.H.; Naveed, S.

    2008-01-01

    As an agro-waste material the rice husk is abundantly available is rice growing areas. In many areas rice husk after burning involves disposal problems because of higher quantities of silica present in it. Rice husk contains about 20 per cent silica, which is present in hydrated amorphous form. On thermal treatment the silica converts into crystobalite, which is a crystalline form of silica. However amorphous silica can be produced under controlled conditions ensuring high reactivity and large surface area. Leaching the rice husk with organic acids and alkalies removes the metallic impurities from its surface. How a dilute solution of potassium permanganate affects the rice husk is the subject of this research paper. The rice husk was treated with the dilute solution of potassium permanganate at room temperature and then analyzed by SEM, TGA and the ash by analytical treatment after burning under controlled temperature. The SEM results revealed that the protuberances of the rice husk were eaten away by the solution of potassium permanganate. Pyrolysis of rice husks showed that the thermal degradation of the treated rice husk was faster than the untreated rice husk where as analytical results confirmed the presence of more amorphous silica than untreated rice husk. (author)

  6. Chronic Orbital Inflammation Associated to Hydroxyapatite Implants in Anophthalmic Sockets

    Directory of Open Access Journals (Sweden)

    Alicia Galindo-Ferreiro

    2017-12-01

    Full Text Available Purpose: We report 6 patients who received a hydroxyapatite (HA orbital implant in the socket and developed chronic orbital inflammation unresponsive to conventional medical therapy. Case Reports: We assisted 6 cases (4 males, 2 females who received an HA orbital implant in the socket between 2015 and 2016 at King Khaled Eye Specialist Hospital, Riyadh, Saudi Arabia, and developed chronic orbital inflammation with chronic discharge, redness, and pain (onset from weeks to over 2 decades after surgery. Computed tomography evaluation indicated inflammation in the orbital tissues, and histological examination showed a foreign body granulomatous reaction mainly localized around and blanching the HA implant. The condition was unresponsive to usual medical treatment and was resolved immediately after implant removal. Conclusions: Chronic inflammation can occur decades after placement of an HA implant in the orbit and can be successfully treated with implant removal.

  7. Carbon nanotubes functionalized with sodium hyaluronate restore bone repair in diabetic rat sockets.

    Science.gov (United States)

    Sá, M A; Andrade, V B; Mendes, R M; Caliari, M V; Ladeira, L O; Silva, E E; Silva, G A B; Corrêa-Júnior, J D; Ferreira, A J

    2013-07-01

    We evaluated the effects of sodium hyaluronate (HY) and carbon nanotubes functionalized with HY (HY-CNT) on bone repair in the tooth sockets of diabetic rats. Diabetes was induced by streptozotocin (50 mg kg(-1) i.v.), and the sockets were divided into normal control, diabetic control, diabetic treated with HY (1%), and diabetic treated with HY-CNT (100 μg ml(-1)) groups. The sockets were analyzed according to the percentage of bone formation and the number of cell nuclei. The percentage of bone trabeculae was lower in diabetic control animals (11.16 ± 5.10% vs 41.92 ± 6.34% in normal animals) after 14 days. Treating diabetic animals with HY or HY-CNT significantly increased the percentage of neoformed trabeculae (HY: 29.43 ± 3.29%; HY-CNT: 36.90 ± 3.07%). Moreover, the sockets of diabetic animals had an increased number of cell nuclei and HY or HY-CNT reduced this parameter. Our results indicate that HY and HY-CNT restore bone repair in the tooth sockets of diabetic rats, suggesting that these biomaterials are potential adjuvant therapies for the management of diabetes. © 2012 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  8. Fatigue strength of socket welded pipe joint

    International Nuclear Information System (INIS)

    Iida, K.; Matsuda, F.; Sato, M.; Higuchi, M.; Nakagawa, A.

    1994-01-01

    Fully reversed four point bending fatigue tests were carried out of small diameter socket welded joints made of carbon steels. Experimental parameters are pipe diameter, thickness of pipe and socket wall, throat depth and shape of fillet welds, slip-on and diametral gaps in the socket welding, lack of penetration at the root of fillet welds, and peening of fillet welds. In most cases a fatigue crack started from the root of the fillet, but in the case of higher stress amplitude, it tended to start from the toe of fillet. The standard socket welded joint of 50 mm diameter showed relatively low fatigue strength, 46 MPa in stress amplitude at the 10 7 cycles failure life. This value corresponds to about 1/5 of that of the smoothed base metal specimens in axial fatigue. The fatigue strength showed decrease with increasing pipe diameter, and increase with increasing the thickness of pipe and socket wall. The effects of throat depth and shape of fillet welds on fatigue strength were not significant. Contrary to the expectation, the fatigue strength of the socket welded joint without slip-on gap is higher than that of the joint with the normal gap. A lack of penetration at the root deleteriously reduced fatigue strength, showing 14 MPa in stress amplitude at the 10 7 cycles failure life for the 50 mm diameter socket joint. (orig.)

  9. Reproductive potential of male catfish treated with gel extract of Aloe ...

    African Journals Online (AJOL)

    The reproductive potential of male catfish treated with gel extract of Aloe vera plant was studied using twelve male fish weighing 500-560g.The fish were divided into 3 groups; A, B and C with four fish in each group. Group A was treated with 2% Aloe vera gel while group B was treated with 3% and Group C the control was ...

  10. Titanium Socket for 120 mm Mortar Base

    National Research Council Canada - National Science Library

    2004-01-01

    .... However, its unique properties also make it difficult to machine productively. ARDEC was spending excessive time turning a profile of a ball socket into the component that supports the mortar tube...

  11. [Implant placement in the aesthetic zone: the socket-shield-technique].

    Science.gov (United States)

    Lagas, L J; Pepplinkhuizen, J J F A A; Bergé, S J; Meijer, G J

    2015-01-01

    Following the extraction of an incisor in the maxilla, resorption of the -alveolar bone always occurs, especially on the buccal side. This often indicates that in the buccocervical area, insufficient bone is present to cover the dental implant. One treatment option is to carry out a bone transplant on the buccal side prior to or during the placement of the implant. An alternative way of supporting the buccocervical gingival is to leave the buccal part of the radixin situ, the so-called socket-shield technique. The results of this treatment for 16 consecutive patients were evaluated and revealed that the socket-shield technique produces good treatment results.

  12. Treatment stability in patients with Class II malocclusion treated with 2 maxillary premolar extractions or without extractions.

    Science.gov (United States)

    Janson, Guilherme; Camardella, Leonardo Tavares; Araki, Janine Della Valle; de Freitas, Marcos Roberto; Pinzan, Arnaldo

    2010-07-01

    The purpose of this study was to compare the occlusal stability of Class II malocclusion treatment with and without extraction of 2 maxillary premolars. A sample of 59 records from patients with complete Class II malocclusion was used. This sample was divided into 2 groups with the following characteristics: group 1, comprising 29 patients treated without extractions, and group 2, comprising 30 patients treated with extraction of 2 maxillary premolars. Dental cast measurements were obtained before and after treatment and at a minimum of 2.4 years after treatment. The pretreatment, posttreatment, and postretention occlusal statuses were evaluated with the peer assesment rating index. The occlusal indexes at the postretention stage and the posttreatment changes and percentages of posttreatment changes were compared with t tests. The nonextraction and the 2 maxillary premolar extraction treatment protocols of complete Class II malocclusions had no statistically significant differences in occlusal stability. Finishing Class II malocclusion treatment with the molars in a Class II relationship has similar occlusal stability as finishing with the molars in a Class I relationship. Copyright (c) 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  13. The definitive guide to HTML5 WebSocket

    CERN Document Server

    Wang, Vanessa; Moskovits, Peter

    2013-01-01

    The Definitive Guide to HTML5 WebSocket is the ultimate insider's WebSocket resource. This revolutionary new web technology enables you to harness the power of true real-time connectivity and build responsive, modern web applications.   This book contains everything web developers and architects need to know about WebSocket. It discusses how WebSocket-based architectures provide a dramatic reduction in unnecessary network overhead and latency compared to older HTTP (Ajax) architectures, how to layer widely used protocols such as XMPP and STOMP on top of WebSocket, and how to secure WebSocket c

  14. Feeding preference of Plutella xylostella for leaves treated with plant extracts

    Directory of Open Access Journals (Sweden)

    IRYS F.S. COUTO

    Full Text Available ABSTRACT Plutella xylostella L. is one of the main agents to cause damages to plants of Brassica genus, provoking negative impacts in cultures. The use of botanical extracts in plants protection has been related in literature, however, their use in the species analyzed in this study is not yet reported. We assessed the effect of aqueous and methanolic extracts of the species: Schinus terebinthifolius Raddi (Pink Pepper, Annona coriacea Mart. (Araticum, Duguetia furfuracea (A. St.-Hil. Benth. & Hook. (Pindaúva do campo and Trichilia silvatica C. DC. (Catiguá-branco, occuring in the state of Mato Grosso do Sul and whose feeding preference of P. xylostella larvae of 3rd instar. We intend to answer the following questions: (1 Are the plant species analyzed fagodeterrentes? (2 what type of extract produces the least food preferrence? To answer these questions, we treated cabbage disks with aqueous extracts stored in a refrigerator in periods of 0, 7, 14 and 21 days and the methanolic extracts were treated at concentrations of 0.5 mg/mL, 1.0 mg/mL, 2.0mg/mL. The aqueous and methanolic extracts of T. silvatica presented the lowest values of feeding preference, 0.113 and 0.06, respectively, compared to other extracts.

  15. Bone grafting of alveolar socket and ovate seat pontic preparation for natural emergence profile for anterior bridge - A case report

    Directory of Open Access Journals (Sweden)

    Vijay Deshmukh

    2009-01-01

    Full Text Available Alveolar atrophy following tooth extraction remains a challenge for future prosthetic restorations. Immediate implant placement and postextraction alveolar bone grafting are two methods that are used to prevent significant postextraction bone loss. Grafting is one of the most common methods of socket preservation widely used to prevent the collapse of oral tissues following extraction so that an excellent esthetic prosthesis can be provided particularly in the anterior maxillary region. The present report describes the management of a maxillary tooth extraction socket using a socket preservation technique involving placement of an osteoconductive slowly resorbable grafting material & resorbable collagen membrane in the extraction socket also called as Bio-Col socket preservation technique followed by a provisional restoration to preserve the tissues & interdental papilla for the placement of future final ovate pontic anterior bridge to give the illusion of the tooth emerging from the gums. This technique resulted in a successful prevention of alveolar bone loss following tooth extraction & maintainence of tissue contour & density which provided a good tissue base for the fabrication of Ovate pontic giving excellent esthetic results.

  16. Clinical study of Atopic Dermatitis patient treated with Poison Extraction Method

    Directory of Open Access Journals (Sweden)

    Park Chi-young

    2007-06-01

    Full Text Available Objectives : This study is desinged in order to evaluate the Poison extraction method for the Atopic dermatitis. Methods : The authors observed the two cases of Atopic dermatitis patients who previously used steroid-based ointment. for treating the Poison Extraction Method. Conclusions : 1. In case 1, the patient with mild case of Atopic dermatitis in face is treated with the Poison extraction method. Rash symptoms intensed for first few days. As sweating appeared in the local area from the seventh day, all the symptoms was disappeared rapidly. No recurrence was found. 2. In case 2, the patient with severe case of Atopic dermatitis in whole body is treated with the Poison extraction method. The symptoms intensed after two months and all the symptoms of itchiness, rash, scaly letter dissapeared in the third and fourth months. No recurrence was found. 3. In both cases of mild and severe cases of Atopic dermatitis. all the symptoms were disappeared and no recurrence was found with the Poison Extraction Method.

  17. MUTAGENICITY OF NITRITE-TREATED AQUEOUS EXTRACT OF 'PIPER BETLE'; L

    Science.gov (United States)

    Betel quid is chewed as a masticatory material by people in certain areas of Asia. The quid chewing has been related to oral cancer by epidemiological study. The mutagenic components in the aqueous extracts of betel quid ingredients were studied. Only nitrite-treated aqueous extr...

  18. The Lipid Lowering and Cardioprotective Effects of Vernonia calvoana Ethanol Extract in Acetaminophen-Treated Rats

    Directory of Open Access Journals (Sweden)

    Godwin Eneji Egbung

    2017-12-01

    Full Text Available Background: Paracetamol overdose/abuse as a result of self-medication is a common occurrence amongst people living in low/middle income countries. The present study was designed to investigate the hypolipidemic and cardioprotective potentials of Vernonia calvoana (VC ethanol extract in acetaminophen (paracetamol-treated rats. Methods: Thirty-five Wistar rats weighing 100–150 g were randomly assigned into five groups of seven rats each. Groups 2–5 received high doses of paracetamol to induce liver damage, while group 1 was used as normal control. Afterwards, they were allowed to receive varying doses of VC (group 3 and 4 or vitamin E (group 5, whilst groups 1 and 2 were left untreated. The treatment period lasted for twenty one days after which sera were harvested and assayed for serum lipid indices using standard methods. Results: Groups 3 to 5 treated animals indicated significant decrease (p < 0.001 in low density lipoprotein cholesterol (LDL-c, total cholesterol (TC and triacylglycerol (TG levels relative to the normal and acetaminophen-treated controls, the atherogenic index showed a significant decrease (p < 0.001 in all treated groups compared with normal and acetaminophen-treated controls. However, the VC- and vitamin E-treated groups showed significant (p < 0.001 increase in high density lipoprotein cholesterol (HDL-C relative to the controls. Conclusions: Data from our study suggest that ethanol leaf extract of VC possesses probable hypolipidemic and cardioprotective effects.

  19. 30 CFR 57.12035 - Weatherproof lamp sockets.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Weatherproof lamp sockets. 57.12035 Section 57.12035 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Surface and Underground § 57.12035 Weatherproof lamp sockets. Lamp sockets shall be of a weatherproof type...

  20. 30 CFR 56.12035 - Weatherproof lamp sockets.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Weatherproof lamp sockets. 56.12035 Section 56.12035 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL....12035 Weatherproof lamp sockets. Lamp sockets shall be of a weatherproof type where they are exposed to...

  1. Oxidative stress in bromus seedlings treated with Salvia sclarea L. aqueous extract

    Directory of Open Access Journals (Sweden)

    Šućur, J.

    2016-12-01

    Full Text Available Extensive use of synthetic pesticides has negative effects on the environment and on human and animal health. Knowledge on allelopathic interactions could provide effective tools for a better exploitation of natural resources in the management of weeds without using herbicides. One of highly resistant weed species is bromus. The effects of two concentrations (0.1% and 0.2% of Salvia sclarea L. aqueous extract on the activity of the antioxidant enzymes, superoxide dismutase (SOD and catalase (CAT in leaves and roots of bromus (Bromus mollis L. seedlings, were examined. Our results showed that both concentrations of the extract used (0.1% and 0.2% stimulated the significant increase of the superoxide dismutase activity in leaves and roots of bromus 72 hours and 120 hours after the treatment. The significant increase of the catalase activity was recorded in roots of bromus 72 h after the treatment. Two tested extract concentrations affected activity of the antioxidant enzymes in the same way, but the higher activity was observed in the roots treated with higher concentration (0.2%. The increase of the activities of antioxidant enzymes, in response to stress induced by S. sclarea aqueous extract, indicate that the plant extract possesses allelopathic activity on treated plant.

  2. Ball-and-socket ankle joint

    International Nuclear Information System (INIS)

    Pistoia, F.; Ozonoff, M.B.; Wintz, P.; Hartford Hospital, CT

    1987-01-01

    The ball-and-socket ankle joint is a malformation of the ankle in which the articular surface of the talus is hemispherical in both the anteroposterior and lateral projections and has a congruent, concave tibial articular surface. Fourteen patients with this condition were identified retrospectively. Thirteen patients were thought to have the congenital type of ball-and-socket ankle joint which in many was associated with tarsal coalition, short limb, and ray fusion and deletion anomalies. One case of the acquired type, demonstrating less geometric rounding of the talar margins, was seen in a patient with myelomeningocele, probably resulting from sensory and motor deficits. Although the exact etiology of the congenital type is unknown, its association with other malformations suggests that the ball-and-socket ankle joint results from an overall maldevelopment of the ankle and foot. (orig.)

  3. Immediate Implant Placement in Sockets with Asymptomatic Apical Periodontitis.

    Science.gov (United States)

    Crespi, Roberto; Capparé, Paolo; Crespi, Giovanni; Lo Giudice, Giuseppe; Gastaldi, Giorgio; Gherlone, Enrico

    2017-02-01

    The purpose of the present study was to evaluate if the presence of granulation tissue in asymptomatic apical periodontitis compromised immediate implant placement. Patients requiring extraction of one tooth (maxillary and mandibular incisive, canine or premolar) with asymptomatic apical periodontitis, were recruited for this prospective study. They were randomly scheduled into two groups: in first group (A) including 30 teeth, reactive soft tissue was debrided before implant placement, and in second group (B) including 30 teeth, reactive soft tissue was left in the apical lesion. Implants were positioned immediately after tooth extraction, and were loaded after 3 months in both groups. Cone beam computed tomography was performed before tooth extraction and at 1-year follow-up to evaluate the radiolucency around the root apex and the implant, bucco-lingual bone levels were also checked. Sixty patients were included in this study. Sixty implants were placed immediately after tooth extraction and, at 1-year follow-up, a survival rate of 100% was reported. After one year both groups showed absence of radiolucent zone at the apical region of implants. All fresh sockets presented a buccal-palatal bone reduction in both groups after one year, even if not statistically significant differences were found between baseline bone levels and within groups. Within the limitations of the present study, the immediate placement of implants into the extraction sockets with asymptomatic apical periodontitis, in presence of primary stability, did not lead to an increased rate of complications and rendered an equally favorable type of tissue integration. © 2016 Wiley Periodicals, Inc.

  4. Efficacy of Platelet-Rich Fibrin After Mandibular Third Molar Extraction: A Systematic Review and Meta-Analysis.

    Science.gov (United States)

    Al-Hamed, Faez Saleh; Tawfik, Mohamed Abdel-Monem; Abdelfadil, Ehab; Al-Saleh, Mohammed A Q

    2017-06-01

    To assess the effect of platelet-rich fibrin (PRF) on the healing process of the alveolar socket after surgical extraction of the mandibular third molars. PubMed, the Cochrane Central Register of Controlled Trials, Scopus, and relevant journals were searched using a combination of specific keywords ("platelet-rich fibrin," "oral surgery," and "third molar"). The final search was conducted on November 2, 2015. Randomized controlled clinical trials, as well as controlled clinical trials, aimed at comparing the effect of PRF versus natural healing after extraction of mandibular third molars were included. Five randomized controlled trials and one controlled clinical trial were included. There were 335 extractions (168 with PRF and 167 controls) in 183 participants. Considerable heterogeneity in study characteristics, outcome variables, and estimated scales was observed. Positive results were generally recorded for pain, trismus, swelling, periodontal pocket depth, soft tissue healing, and incidence of localized osteitis, but not in all studies. However, no meta-analysis could be conducted for such variables because of the different measurement scales used. The qualitative and meta-analysis results showed no significant improvement in bone healing with PRF-treated sockets compared with the naturally healing sockets. Within the limitations of the available evidence, PRF seems to have no beneficial role in bone healing after extraction of the mandibular third molars. Future standardized randomized controlled clinical trials are required to estimate the effect of PRF on socket regeneration. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  5. Comparison of DNA extraction protocols for microbial communities from soil treated with biochar

    Directory of Open Access Journals (Sweden)

    D.C.A. Leite

    2014-01-01

    Full Text Available Many studies have evaluated the effects of biochar application on soil structure and plant growth. However, there are very few studies describing the effect of biochar on native soil microbial communities. Microbial analysis of environmental samples requires accurate and reproducible methods for the extraction of DNA from samples. Because of the variety among microbial species and the strong adsorption of the phosphate backbone of the DNA molecule to biochar, extracting and purifying high quality microbial DNA from biochar-amended soil is not a trivial process and can be considerably more difficult than the extraction of DNA from other environmental samples. The aim of this study was to compare the relative efficacies of three commercial DNA extraction kits, the FastDNA® SPIN Kit for Soil (FD kit, the PowerSoil® DNA Isolation Kit (PS kit and the ZR Soil Microbe DNA Kit MiniprepTM (ZR kit, for extracting microbial genomic DNA from sand treated with different types of biochar. The methods were evaluated by comparing the DNA yields and purity and by analysing the bacterial and fungal community profiles generated by PCR-DGGE. Our results showed that the PCR-DGGE profiles for bacterial and fungal communities were highly affected by the purity and yield of the different DNA extracts. Among the tested kits, the PS kit was the most efficient with respect to the amount and purity of recovered DNA and considering the complexity of the generated DGGE microbial fingerprint from the sand-biochar samples.

  6. Comparison of DNA extraction protocols for microbial communities from soil treated with biochar

    Science.gov (United States)

    Leite, D.C.A.; Balieiro, F.C.; Pires, C.A.; Madari, B.E.; Rosado, A.S.; Coutinho, H.L.C.; Peixoto, R.S.

    2014-01-01

    Many studies have evaluated the effects of biochar application on soil structure and plant growth. However, there are very few studies describing the effect of biochar on native soil microbial communities. Microbial analysis of environmental samples requires accurate and reproducible methods for the extraction of DNA from samples. Because of the variety among microbial species and the strong adsorption of the phosphate backbone of the DNA molecule to biochar, extracting and purifying high quality microbial DNA from biochar-amended soil is not a trivial process and can be considerably more difficult than the extraction of DNA from other environmental samples. The aim of this study was to compare the relative efficacies of three commercial DNA extraction kits, the FastDNA® SPIN Kit for Soil (FD kit), the PowerSoil® DNA Isolation Kit (PS kit) and the ZR Soil Microbe DNA Kit Miniprep™ (ZR kit), for extracting microbial genomic DNA from sand treated with different types of biochar. The methods were evaluated by comparing the DNA yields and purity and by analysing the bacterial and fungal community profiles generated by PCR-DGGE. Our results showed that the PCR-DGGE profiles for bacterial and fungal communities were highly affected by the purity and yield of the different DNA extracts. Among the tested kits, the PS kit was the most efficient with respect to the amount and purity of recovered DNA and considering the complexity of the generated DGGE microbial fingerprint from the sand-biochar samples. PMID:24948928

  7. Pain and discomfort in the anophthalmic socket

    DEFF Research Database (Denmark)

    Bohman, Elin; Roed Rasmussen, Marie Louise; Kopp, Eva Dafgård

    2014-01-01

    eye pain, and psychological/psychiatric factors. Recent research has brought attention to the role of prosthesis deposits in mucous formation, meibomian gland dysfunction causing dry socket, and the anophthalmic patients' experience of phantom eye pain. SUMMARY: Anophthalmic patients may experience...

  8. The efficacy of hyaluronic acid in postextraction sockets of impacted third molars: A pilot study.

    Science.gov (United States)

    Yilmaz, N; Demirtas, N; Kazancioglu, H O; Bayer, S; Acar, A H; Mihmanli, A

    2017-12-01

    This study aims to evaluate the effectiveness of local hyaluronic acid (HA) administration to surgically remove impacted third molar sockets and measure pain, swelling, and trismus. The study included a total of 25 healthy patients aged 18-29 years with asymptomatic bilaterally impacted lower third molars. All cases have been performed under local anesthesia. In the study group, 0.8% HA (Gengigel®) was applied in the postextraction sockets of the right third molars and in the control group nothing was applied to the extraction sockets of the left third molars. Postoperative pain, trismus, and swelling were evaluated on the 1st, 3rd, and 7th postoperative days. No difference was determined between groups in facial swelling and maximum mouth opening. However, the amount of pain significantly reduced in HA groups according to visual analog scale (P = 0.001). The results of this study showed that HA can produce an analgesic action in postextraction sockets after surgical removal of impacted teeth and therefore it has a clinical benefit to reduce usage of nonsteroidal anti-inflammatory drugs after dentoalveolar surgery.

  9. Antimutagenic Effect of Hibiscus sabdariffa L. Aqueous Extract on Rats Treated with Monosodium Glutamate.

    Science.gov (United States)

    Gheller, Ana Carla Guidini Valentini; Kerkhoff, Jacqueline; Vieira Júnior, Gerardo Magela; de Campos, Kleber Eduardo; Sugui, Marina Mariko

    2017-01-01

    Hibiscus sabdariffa L. is a plant of the Malvaceae family, commonly known as roselle. H. sabdariffa is known to contain antioxidant, cholesterol-lowering, antiobesity, insulin resistance reduction, antihypertensive, and skin cancer chemopreventive properties. This study evaluated the effects of H. sabdariffa aqueous extract against cyclophosphamide (CPA, 25 mg/Kg) induced damage to DNA in male Wistar rats by micronucleus test. Samples of H. sabdariffa calyx were obtained in the municipality of Barra do Garças, Mato Grosso, Brazil. The aqueous extract was prepared by infusion and each animal received a daily dose of 400 mg/Kg by gavage for 15 consecutive days of treatment. The presence of anthocyanins was confirmed by ferric chloride test and phenolic compounds using high-performance liquid chromatography, with emphasis on the identification of rutin. The animals were sacrificed by deepening of anaesthesia to obtain bone marrow and determination of the frequency of micronucleated polychromatic erythrocytes. The group treated with the aqueous extract of H. sabdariffa revealed a 91% reduction in micronucleus frequency when compared with the positive control group. Under the conditions tested, H. sabdariffa L. presented a protective effect to CPA-induced damage to DNA of the treated animals, and it is a potential candidate as a chemopreventive agent against carcinogenesis.

  10. Antimutagenic Effect of Hibiscus sabdariffa L. Aqueous Extract on Rats Treated with Monosodium Glutamate

    Science.gov (United States)

    Kerkhoff, Jacqueline; Vieira Júnior, Gerardo Magela; de Campos, Kleber Eduardo; Sugui, Marina Mariko

    2017-01-01

    Hibiscus sabdariffa L. is a plant of the Malvaceae family, commonly known as roselle. H. sabdariffa is known to contain antioxidant, cholesterol-lowering, antiobesity, insulin resistance reduction, antihypertensive, and skin cancer chemopreventive properties. This study evaluated the effects of H. sabdariffa aqueous extract against cyclophosphamide (CPA, 25 mg/Kg) induced damage to DNA in male Wistar rats by micronucleus test. Samples of H. sabdariffa calyx were obtained in the municipality of Barra do Garças, Mato Grosso, Brazil. The aqueous extract was prepared by infusion and each animal received a daily dose of 400 mg/Kg by gavage for 15 consecutive days of treatment. The presence of anthocyanins was confirmed by ferric chloride test and phenolic compounds using high-performance liquid chromatography, with emphasis on the identification of rutin. The animals were sacrificed by deepening of anaesthesia to obtain bone marrow and determination of the frequency of micronucleated polychromatic erythrocytes. The group treated with the aqueous extract of H. sabdariffa revealed a 91% reduction in micronucleus frequency when compared with the positive control group. Under the conditions tested, H. sabdariffa L. presented a protective effect to CPA-induced damage to DNA of the treated animals, and it is a potential candidate as a chemopreventive agent against carcinogenesis. PMID:28197528

  11. Antimutagenic Effect of Hibiscus sabdariffa L. Aqueous Extract on Rats Treated with Monosodium Glutamate

    Directory of Open Access Journals (Sweden)

    Ana Carla Guidini Valentini Gheller

    2017-01-01

    Full Text Available Hibiscus sabdariffa L. is a plant of the Malvaceae family, commonly known as roselle. H. sabdariffa is known to contain antioxidant, cholesterol-lowering, antiobesity, insulin resistance reduction, antihypertensive, and skin cancer chemopreventive properties. This study evaluated the effects of H. sabdariffa aqueous extract against cyclophosphamide (CPA, 25 mg/Kg induced damage to DNA in male Wistar rats by micronucleus test. Samples of H. sabdariffa calyx were obtained in the municipality of Barra do Garças, Mato Grosso, Brazil. The aqueous extract was prepared by infusion and each animal received a daily dose of 400 mg/Kg by gavage for 15 consecutive days of treatment. The presence of anthocyanins was confirmed by ferric chloride test and phenolic compounds using high-performance liquid chromatography, with emphasis on the identification of rutin. The animals were sacrificed by deepening of anaesthesia to obtain bone marrow and determination of the frequency of micronucleated polychromatic erythrocytes. The group treated with the aqueous extract of H. sabdariffa revealed a 91% reduction in micronucleus frequency when compared with the positive control group. Under the conditions tested, H. sabdariffa L. presented a protective effect to CPA-induced damage to DNA of the treated animals, and it is a potential candidate as a chemopreventive agent against carcinogenesis.

  12. Effectiveness of platelet-rich fibrin in the management of pain and delayed wound healing associated with established alveolar osteitis (dry socket).

    Science.gov (United States)

    Sharma, Ashish; Aggarwal, Nimish; Rastogi, Sanjay; Choudhury, Rupshikha; Tripathi, Siddhi

    2017-01-01

    To assess the efficacy of platelet-rich fibrin (PRF) on the pain and healing of the extraction socket related with established alveolar osteitis (dry socket, AO) after the removal of maxillary and mandibular molars. One hundred consecutive adult patients with age group ranging from 18 to 40 years along with established dry socket after maxillary and mandibular molar extractions who have not received any treatment for the same were included in this single-arm clinical trial. PRF was placed in the maxillary and mandibular molar extraction sockets after adequate irrigation of the socket. All the patients evaluated for the various study variables which include pain, degree of inflammation, and healthy granulation tissue formation (wound healing) at the 1 st , 3 rd , 7 th , and 14 th post-PRF placement day in the alveolar socket. Data were analyzed using Shapiro-Wilk's test, Chi-square test and/or Student's t -test, Friedman's test, Wilcoxon signed-rank test, and Bonferroni test, with the significance level set at P healing by the end of the 2 nd week. The use of PRF in this clinical trial illustrates the promising results in terms of reduced pain and better healing in the patients with sustained AO.

  13. Descending Necrotizing Mediastinitis Treated with Tooth Extractions following Mediastinal and Cervical Drainage

    Directory of Open Access Journals (Sweden)

    Minoru Fukuchi

    2015-10-01

    Full Text Available Descending necrotizing mediastinitis (DNM is a rare condition in which oropharyngeal infection spreads to the mediastinum via the cervical fascia. Delayed diagnosis and surgery result in a high mortality rate among patients with DNM. We present a case of DNM resulting from odontogenic infection treated successfully with tooth extraction following mediastinal and cervical drainage. A 43-year-old, previously healthy Japanese man was admitted to our hospital for treatment of acute mediastinitis. Computed tomography revealed gas collection around the mid-thoracic esophagus and bilateral pleural effusion. We performed mediastinal drainage via right thoracotomy. Cervicotomy was performed on postoperative day 14 to drain a residual cervical abscess. The patient required the extraction of ten teeth over three procedures to address primary odontogenic infection before his fever resolved on postoperative day 40. Prompt diagnosis, aggressive drainage and removal of the source of infection can improve survival among patients with this life-threatening disease.

  14. Safety evaluation of socket weld integrity in nuclear piping

    International Nuclear Information System (INIS)

    Choi, Y.H.; Kim, H.J.; Choi, S.Y.; Kim, Y.J.; Kim, Y.J.

    2004-01-01

    The purposes of this paper are to evaluate the integrity of socket weld in nuclear piping and prepare the technical basis for a new guideline on radiographic testing (RT) for the socket weld. Recently, the integrity of the socket weld is regarded as a safety concern in nuclear power plants because lots of failures and leaks have been reported in the socket weld. The root causes of the socket weld failure are known as unanticipated loadings such as vibration or thermal fatigue and improper weld joint during construction. The ASME Code sec. III requires 1/16 inch gap between the pipe and fitting in the socket weld. Many failure cases, however, showed that the gap requirement was not satisfied. The Code also requires magnetic particle examination (MT) or liquid penetration examination (PT) on the socket weld, but not radiographic examination (RT). It means that it is not easy to examine the 1/16 inch gap in the socket weld by using the NDE methods currently required in the Code. In this paper, the effects of the requirements in the ASME Code sec. III on the socket weld integrity were evaluated by using finite element method. The crack behavior in the socket weld was also investigated under vibration event in nuclear power plants. The results showed that the socket weld was very susceptible to the vibration if the requirements in ASME Code were not satisfied. The constraint between the pipe and fitting due to the contact significantly affects the integrity of the socket weld. This paper also suggests a new guideline on the RT for the socket weld during construction stage in nuclear power plants. (orig.)

  15. Treating dental crowding with mandibular incisor extraction in an Angle Class I patient

    Directory of Open Access Journals (Sweden)

    Gislana Braga Machado

    2015-06-01

    Full Text Available Mandibular dental crowding often encourages patients to seek orthodontic treatment. The orthodontist should decide between protrusion of incisors or decrease in dental volume so as to achieve proper alignment and leveling. The present study reports the treatment of an Angle Class I malocclusion adolescent female brachyfacial patient with severe mandibular dental crowding, increased curve of Spee and deep overbite. The patient was treated with extraction of a mandibular incisor. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as a requirement for the title of certified by the BBO.

  16. High-performance polymeric photovoltaic cells with a gold chloride-treated polyacrylonitrile hole extraction interlayer

    Science.gov (United States)

    Jeong, Ji-Ho; Noh, Yong-Jin; Kim, Seok-Soon; Kwon, Sung-Nam; Na, Seok-In

    2018-03-01

    We introduce a high efficiency polymeric photovoltaic cell (PPV) to be obtained by polyacrylonitrile (PAN) hole extraction layer (HEL) modification with gold chloride (AuCl3). The role of PAN HELs with AuCl3 and their effects on solar cell performances were studied with ultraviolet photoemission spectroscopy, atomic force microscopy, internal resistances in PPVs, and current-voltage power curves. The resultant PPVs with AuCl3-treated PAN HELs showed improved cell efficiency compared to PSCs with no interlayer and PAN without AuCl3. Furthermore, with AuCl3-treated PAN, we finally achieved a high efficiency of 6.91%, and a desirable PPV-stability in poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b‧]dithiophe-ne-2,6-diyl][3-fluoro-2-[(2-thylhexyl)carbonyl]-thieno[3,4-b]thiophenediyl

  17. The effects of modeling simplifications on craniofacial finite element models: the alveoli (tooth sockets) and periodontal ligaments.

    Science.gov (United States)

    Wood, Sarah A; Strait, David S; Dumont, Elizabeth R; Ross, Callum F; Grosse, Ian R

    2011-07-07

    Several finite element models of a primate cranium were used to investigate the biomechanical effects of the tooth sockets and the material behavior of the periodontal ligament (PDL) on stress and strain patterns associated with feeding. For examining the effect of tooth sockets, the unloaded sockets were modeled as devoid of teeth and PDL, filled with teeth and PDLs, or simply filled with cortical bone. The third premolar on the left side of the cranium was loaded and the PDL was treated as an isotropic, linear elastic material using published values for Young's modulus and Poisson's ratio. The remaining models, along with one of the socket models, were used to determine the effect of the PDL's material behavior on stress and strain distributions under static premolar biting and dynamic tooth loading conditions. Two models (one static and the other dynamic) treated the PDL as cortical bone. The other two models treated it as a ligament with isotropic, linear elastic material properties. Two models treated the PDL as a ligament with hyperelastic properties, and the other two as a ligament with viscoelastic properties. Both behaviors were defined using published stress-strain data obtained from in vitro experiments on porcine ligament specimens. Von Mises stress and strain contour plots indicate that the effects of the sockets and PDL material behavior are local. Results from this study suggest that modeling the sockets and the PDL in finite element analyses of skulls is project dependent and can be ignored if values of stress and strain within the alveolar region are not required. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Socket preservation using freeze-dried bone allograft with and without plasma rich in growth factors in dogs

    Directory of Open Access Journals (Sweden)

    Mohammad Hasan Samandari

    2016-01-01

    Full Text Available Background: Plasma rich in growth factors (PRGF and freeze-dried bone allograft (FDBA are shown to promote bone healing. This study was aimed to histologically and histomorphometrically investigate the effect of combined use of PRGF and FDBA on bone formation, and compare it to FDBA alone and control group. Materials and Methods: The distal roots of the lower premolars were extracted bilaterally in four female dogs. Sockets were randomly divided into FDBA + PRGF, FDBA, and control groups. Two dogs were sacrificed after 2 weeks and two dogs were sacrificed after 4 weeks. Sockets were assessed histologically and histomorphometrically. Data were analyzed by Kruskal-Wallis test followed by Mann-Whitney U-tests utilizing the SPSS software version 20. P < 0.05 was considered statistically significant. Results: While the difference in density of fibrous tissue in three groups was not statistically significant (P = 0.343, the bone density in grafted groups was significantly higher than the control group (P = 0.021. The least decrease in all socket dimensions was observed in the FDBA group. However, these differences were only significant in coronal portion at week 4. Regarding socket dimensions and bone density, the difference between FDBA and FDBA+PRGF groups was not significant in middle and apical portions. Conclusion: The superiority of PRGF+FDBA overFDBA in socket preservation cannot be concluded from this experiment.

  19. Socket preservation using freeze-dried bone allograft with and without plasma rich in growth factors in dogs

    Science.gov (United States)

    Samandari, Mohammad Hasan; Haghighat, Abbas; Torabinia, Nakisa; Taghian, Mehdi; Sadri, Leyli; Naemy, Vahid

    2016-01-01

    Background: Plasma rich in growth factors (PRGF) and freeze-dried bone allograft (FDBA) are shown to promote bone healing. This study was aimed to histologically and histomorphometrically investigate the effect of combined use of PRGF and FDBA on bone formation, and compare it to FDBA alone and control group. Materials and Methods: The distal roots of the lower premolars were extracted bilaterally in four female dogs. Sockets were randomly divided into FDBA + PRGF, FDBA, and control groups. Two dogs were sacrificed after 2 weeks and two dogs were sacrificed after 4 weeks. Sockets were assessed histologically and histomorphometrically. Data were analyzed by Kruskal–Wallis test followed by Mann–Whitney U-tests utilizing the SPSS software version 20. P PRGF groups was not significant in middle and apical portions. Conclusion: The superiority of PRGF+FDBA overFDBA in socket preservation cannot be concluded from this experiment. PMID:27857769

  20. Dynamic elasticity measurement for prosthetic socket design.

    Science.gov (United States)

    Kim, Yujin; Kim, Junghoon; Son, Hyeryon; Choi, Youngjin

    2017-07-01

    The paper proposes a novel apparatus to measure the dynamic elasticity of human limb in order to help the design and fabrication of the personalized prosthetic socket. To take measurements of the dynamic elasticity, the desired force generated as an exponential chirp signal in which the frequency increases and amplitude is maintained according to time progress is applied to human limb and then the skin deformation is recorded, ultimately, to obtain the frequency response of its elasticity. It is referred to as a Dynamic Elasticity Measurement Apparatus (DEMA) in the paper. It has three core components such as linear motor to provide the desired force, loadcell to implement the force feedback control, and potentiometer to record the skin deformation. After measuring the force/deformation and calculating the dynamic elasticity of the limb, it is visualized as 3D color map model of the limb so that the entire dynamic elasticity can be shown at a glance according to the locations and frequencies. For the visualization, the dynamic elasticities measured at specific locations and frequencies are embodied using the color map into 3D limb model acquired by using 3D scanner. To demonstrate the effectiveness, the visualized dynamic elasticities are suggested as outcome of the proposed system, although we do not have any opportunity to apply the proposed system to the amputees. Ultimately, it is expected that the proposed system can be utilized to design and fabricate the personalized prosthetic socket in order for releasing the wearing pain caused by the conventional prosthetic socket.

  1. Web-based control application using WebSocket

    International Nuclear Information System (INIS)

    Furukawa, Y.

    2012-01-01

    The WebSocket allows asynchronous full-duplex communication between a Web-based (i.e. Java Script-based) application and a Web-server. WebSocket started as a part of HTML5 standardization but has now been separated from HTML5 and has been developed independently. Using WebSocket, it becomes easy to develop platform independent presentation layer applications for accelerator and beamline control software. In addition, a Web browser is the only application program that needs to be installed on client computer. The WebSocket-based applications communicate with the WebSocket server using simple text-based messages, so WebSocket is applicable message-based control system like MADOCA, which was developed for the SPring-8 control system. A simple WebSocket server for the MADOCA control system and a simple motor control application were successfully made as a first trial of the WebSocket control application. Using Google-Chrome (version 13.0) on Debian/Linux and Windows 7, Opera (version 11.0) on Debian/Linux and Safari (version 5.0.3) on Mac OS X as clients, the motors can be controlled using a WebSocket-based Web-application. Diffractometer control application use in synchrotron radiation diffraction experiment was also developed. (author)

  2. Improving the two-step remediation process for CCA-treated wood. Part I, Evaluating oxalic acid extraction

    Science.gov (United States)

    Carol Clausen

    2004-01-01

    In this study, three possible improvements to a remediation process for chromated-copper-arsenate (CCA) treated wood were evaluated. The process involves two steps: oxalic acid extraction of wood fiber followed by bacterial culture with Bacillus licheniformis CC01. The three potential improvements to the oxalic acid extraction step were (1) reusing oxalic acid for...

  3. Intercellular coupling mediated by potassium accumulation in peg-and-socket junctions

    DEFF Research Database (Denmark)

    Vigmond, Edward J.; Bardakjian, Berj L.; Thuneberg, Lars

    2000-01-01

    Physiology, peg-and-socket junctions, smooth muscle, boundary element method, coupling, morphology......Physiology, peg-and-socket junctions, smooth muscle, boundary element method, coupling, morphology...

  4. Rapid microwave-assisted acid extraction of metals from chromated copper arsenate (CCA)-treated southern pine wood

    Science.gov (United States)

    Bin Yu; Chung Y. Hse; Todd F. Shupe

    2009-01-01

    The effects of acid concentration, reaction time, and temperature in a microwave reactor on recovery of CCA-treated wood were evaluated. Extraction of copper, chromium, and arsenic metals from chromated copper arsenate (CCA)-treated southern pine wood samples with three different acids (i.e., acetic acid, oxalic acid, and phosphoric acid) was investigated using in...

  5. Proteomic profiling and post-translational modifications in human keratinocytes treated with Mucuna pruriens leaf extract.

    Science.gov (United States)

    Cortelazzo, Alessio; Lampariello, Raffaella L; Sticozzi, Claudia; Guerranti, Roberto; Mirasole, Cristiana; Zolla, Lello; Sacchetti, Gianni; Hajek, Joussef; Valacchi, Giuseppe

    2014-02-03

    Mucuna pruriens (Mp) is a plant belonging to the Fabaceae family, with several medicinal properties among which its potential to treat diseases where reactive oxygen species (ROS) play an important role in the pathogeneses. The aim was to investigate the effects of Mp leaf methanolic extract (MPME) on human keratinocytes protein expression and its role in preventing proteins oxidation after oxidative stress (OS) exposure. The effects of MPME on HaCaT cells protein expression were evaluated treating cells with different concentrations of MPME, with glucose oxidase (GO, source of OS) and with MPME subsequently treated with GO. The protein patterns of treated HaCaT cells are analyzed by two-dimensional gel electrophoresis (2-DE) and compared with that of untreated HaCaT. Immunoblotting was then used to evaluate the role of MPME in preventing the 4-hydroxynonenal protein adducts (4-HNE PAs) formation (marker of OS). Eighteen proteins, identified by mass spectrometry (LC-ESI-CID-MS/MS), were modulated distinctly by MPME in HaCaT. Overall, MPME counteract GO effect, reducing the GO-induced overexpression of several proteins involved in stress response (T-complex protein 1, Protein disulfide-isomerase A3, Protein DJ-1, and Stress-induced-phosphoprotein 1), in cell energy methabolism (Inorganic pyrophosphatase, Triosephosphate isomerase isoform 1, 2-phosphopyruvate-hydratase alpha-enolase, and Fructose-bisphosphate aldolase A isoform 1), in cytoskeletal organization (Cytokeratins 18, 9, 2, Cofilin-1, Annexin A2 and F-actin-capping protein subunit beta isoform 1) and in cell cycle progression (Eukaryotic translation initiation factor 5A-1 isoform B). In addition, MPME decreased the 4-HNE PAs levels, in particular on 2-phosphopyruvate-hydratase alpha-enolase and Cytokeratin 9. Our findings show that MPME might be helpful in the treatment of OS-related skin diseases by preventing protein post-translational modifications (4-HNE PAs). © 2013 Published by Elsevier Ireland Ltd.

  6. Carvacrol and Pomegranate Extract in Treating Methotrexate-Induced Lung Oxidative Injury in Rats

    Science.gov (United States)

    Şen, Hadice Selimoğlu; Şen, Velat; Bozkurt, Mehtap; Türkçü, Gül; Güzel, Abdulmenap; Sezgi, Cengizhan; Abakay, Özlem; Kaplan, Ibrahim

    2014-01-01

    Background This study was designed to evaluate the effects of carvacrol (CRV) and pomegranate extract (PE) on methotrexate (MTX)-induced lung injury in rats. Material/Methods A total of 32 male rats were subdivided into 4 groups: control (group I), MTX treated (group II), MTX+CRV treated (group III), and MTX+PE treated (group IV). A single dose of 73 mg/kg CRV was administered intraperitoneally to rats in group III on Day 1 of the investigation. To group IV, a dose of 225 mg/kg of PE was administered via orogastric gavage once daily over 7 days. A single dose of 20 mg/kg of MTX was given intraperitoneally to groups II, III, and IV on Day 2. The total duration of experiment was 8 days. Malondialdehyde (MDA), total oxidant status (TOS), total antioxidant capacity (TAC), and oxidative stress index (OSI) were measured from rat lung tissues and cardiac blood samples. Results Serum and lung specimen analyses demonstrated that MDA, TOS, and OSI levels were significantly greater in group II relative to controls. Conversely, the TAC level was significantly reduced in group II when compared to the control group. Pre-administering either CRV or PE was associated with decreased MDA, TOS, and OSI levels and increased TAC levels compared to rats treated with MTX alone. Histopathological examination revealed that lung injury was less severe in group III and IV relative to group II. Conclusions MTX treatment results in rat lung oxidative damage that is partially counteracted by pretreatment with either CRV or PE. PMID:25326861

  7. A Novel Procedure for the Immediate Reconstruction of Severely Resorbed Alveolar Sockets for Advanced Periodontal Disease

    Directory of Open Access Journals (Sweden)

    Mario Aimetti

    2017-01-01

    Full Text Available Background. Several clinical techniques and a variety of biomaterials have been introduced over the years in an effort to overcome bone remodeling and resorption after tooth extraction. However, the predictability of these procedures in sockets with severely resorbed buccal/lingual plate due to periodontal disease is still unknown. Case Description. A patient with advanced periodontitis underwent extraction of upper right lateral and central incisors. The central incisor exhibited complete buccal bone plate loss and a 9 mm vertical bone deficiency on its palatal side. The alveolar sockets were filled with collagen sponge and covered with a nonresorbable high-density PTFE membrane. Primary closure was not attained and any rigid scaffold material was not used. Histologic analysis provided evidence of new bone formation. At 12 months a cone-beam computed tomographic scan revealed enough bone volume to insert two conventional dental implants in conjunction with minor horizontal bone augmentation procedures. Clinical Implications. This case report would seem to support the potential of the proposed reconstructive approach in changing the morphology of severely resorbed alveolar sockets, minimizing the need for advanced bone regeneration procedures during implant placement.

  8. A Novel Procedure for the Immediate Reconstruction of Severely Resorbed Alveolar Sockets for Advanced Periodontal Disease.

    Science.gov (United States)

    Aimetti, Mario; Manavella, Valeria; Cricenti, Luca; Romano, Federica

    2017-01-01

    Background. Several clinical techniques and a variety of biomaterials have been introduced over the years in an effort to overcome bone remodeling and resorption after tooth extraction. However, the predictability of these procedures in sockets with severely resorbed buccal/lingual plate due to periodontal disease is still unknown. Case Description. A patient with advanced periodontitis underwent extraction of upper right lateral and central incisors. The central incisor exhibited complete buccal bone plate loss and a 9 mm vertical bone deficiency on its palatal side. The alveolar sockets were filled with collagen sponge and covered with a nonresorbable high-density PTFE membrane. Primary closure was not attained and any rigid scaffold material was not used. Histologic analysis provided evidence of new bone formation. At 12 months a cone-beam computed tomographic scan revealed enough bone volume to insert two conventional dental implants in conjunction with minor horizontal bone augmentation procedures. Clinical Implications. This case report would seem to support the potential of the proposed reconstructive approach in changing the morphology of severely resorbed alveolar sockets, minimizing the need for advanced bone regeneration procedures during implant placement.

  9. Hanford/Rocky Flats collaboration on development of supercritical carbon dioxide extraction to treat mixed waste

    International Nuclear Information System (INIS)

    Hendrickson, D.W.; Biyani, R.K.; Brown, C.M.; Teter, W.L.

    1995-11-01

    Proposals for demonstration work under the Department of Energy's Mixed Waste Focus Area, during the 1996 through 1997 fiscal years included two applications of supercritical carbon dioxide to mixed waste pretreatment. These proposals included task RF15MW58 of Rocky Flats and task RL46MW59 of Hanford. Analysis of compatibilities in wastes and work scopes yielded an expectation of substantial collaboration between sites whereby Hanford waste streams may undergo demonstration testing at Rocky Flats, thereby eliminating the need for test facilities at Hanford. This form of collaboration is premised the continued deployment at Rocky Flats and the capability for Hanford samples to be treated at Rocky Flats. The recent creation of a thermal treatment contract for a facility near Hanford may alleviate the need to conduct organic extraction upon Rocky Flats wastes by providing a cost effective thermal treatment alternative, however, some waste streams at Hanford will continue to require organic extraction. Final site waste stream treatment locations are not within the scope of this document

  10. Hanford/Rocky Flats collaboration on development of supercritical carbon dioxide extraction to treat mixed waste

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, D.W.; Biyani, R.K. [Westinghouse Hanford Co., Richland, WA (United States); Brown, C.M.; Teter, W.L. [Kaiser-Hill Co., Golden, CO (United States)

    1995-11-01

    Proposals for demonstration work under the Department of Energy`s Mixed Waste Focus Area, during the 1996 through 1997 fiscal years included two applications of supercritical carbon dioxide to mixed waste pretreatment. These proposals included task RF15MW58 of Rocky Flats and task RL46MW59 of Hanford. Analysis of compatibilities in wastes and work scopes yielded an expectation of substantial collaboration between sites whereby Hanford waste streams may undergo demonstration testing at Rocky Flats, thereby eliminating the need for test facilities at Hanford. This form of collaboration is premised the continued deployment at Rocky Flats and the capability for Hanford samples to be treated at Rocky Flats. The recent creation of a thermal treatment contract for a facility near Hanford may alleviate the need to conduct organic extraction upon Rocky Flats wastes by providing a cost effective thermal treatment alternative, however, some waste streams at Hanford will continue to require organic extraction. Final site waste stream treatment locations are not within the scope of this document.

  11. Chemical coagulants and Moringa oleifera seed extract for treating concrete wastewater

    Directory of Open Access Journals (Sweden)

    Heber Martins de Paula

    2016-01-01

    Full Text Available Wastewater from concrete plants has a high pH and a high concentration of suspended solids, necessitating treatment before reuse or discharge into the environment. The objective of this study is to evaluate the efficiency of two chemical coagulants, aluminum sulfate (Al2(SO43 and iron chloride (FeCl3, and a natural coagulant, Moringa oleifera (MO, all in their soluble forms, in the treatment of wastewater from concrete plants. To this end, the efficiencies of the three coagulants, in combinations with different proportions, were tested. The quality parameters of the wastewater obtained after the treatments were compared to the limit values for non-potable water. The use of coagulants in their soluble form potentiates their effect, especially when preparing the MO extract, i.e., greater amounts of the protein responsible for the coagulation is extracted. A mixture with MO and Al2(SO43 in a 20:80 proportion showed the best results, with 97.5% of the turbidity removed at 60 min. of sedimentation, allowing the treated water to be used for washing vehicles and flushing toilets. The FeCl3 treatment produced a high concentration of chlorides, which could cause corrosion problems, and is therefore not recommended for concrete wastewater treatment.

  12. Does chlorhexidine prevent dry socket?

    Science.gov (United States)

    Richards, Derek

    2012-01-01

    The BBO (Bibliografia Brasileira de Odontologia), Biomed Central, Cochrane Library, Directory of Open Access Journals, LILACS, Open-J-Gate, OpenSIGLE, PubMed, Sabinet and Science-Direct databases were searched. Articles were selected for review from the search results on the basis of their compliance with the broad inclusion criteria: relevant to the review question; and prospective two-arm (or more) clinical study. The primary outcome measure was the incidence of AO reported at the patient level. Two reviewers (VY and SM) independently extracted data and assessed the quality of the accepted articles. Individual dichotomous datasets for the control and test group were extracted from each article. Where possible, missing data were calculated from information given in the text or tables. In addition, authors were contacted in order to obtain missing information. Datasets were assessed for their clinical and methodological heterogeneity following Cochrane guidelines. Meta-analysis was conducted with homogeneous datasets. Publication bias was assessed by use of a funnel plot and Egger's regression. Ten randomised trials were included; almost all involved the removal of third molars. Only two of six identified application protocols (single application of chlorhexidine 0.2% gel or multiple application of 0.12% rinse versus placebo) were found to significantly decrease the incidence of AO. Within the limitations of this review, only two of six identified application protocols were found to significantly decrease the incidence of AO. The evidence for both protocols is weak and may be challenged on the grounds of high risk of selection, detection/performance and attrition bias. This systematic review could not identify sufficient evidence supporting the use of chlorhexidine for the prevention of AO. Chlorhexidine seems not to cause any significantly higher adverse reactions than placebo. Future high-quality randomised control trials are needed to provide conclusive evidence

  13. Socket preservation using demineralized freezed dried bone allograft with and without plasma rich in growth factor: A canine study

    Science.gov (United States)

    Mogharehabed, Ahmad; Birang, Reza; Torabinia, Nakisa; Nasiri, Saman; Behfarnia, Parichehr

    2014-01-01

    Background: The accelerating effect of plasma rich in growth factors (PRGFs) in the healing of extraction sockets has been demonstrated by some studies. The aim of the present study was to histologically and histomorphometrically evaluate whether bone formation would increase by the combined use of PRGF and demineralized freeze-dried bone allograft (DFDBA). Materials and Methods: In four female dogs, the distal root of the second, third and fourth lower premolars were extracted bilaterally and the mesial roots were preserved. The extraction sockets were randomly divided into DFDBA + PRGF, DFDBA + saline or control groups. Two dogs were sacrificed after 2 weeks and two dogs were sacrificed after 6 weeks. The extraction sockets were evaluated from both histological and histomorphometrical aspects. The data were analyzed by Mann-Whitney followed by Kruskal-Wallis tests using the Statistical Package for the Social Sciences version 20 (SPSS Inc., Chicago, IL, USA). Significant levels were set at 0.05. Results: The least decrease in socket height was observed in the DFDBA + PRGF group (0.73 ± 0.42 mm). The least decrease in the coronal portion was observed in the DFDBA + PRGF group (1.38 ± 1.35 mm²). The least decrease in the middle surface was observed in the DFDBA group (0.61 ± 0.80 mm²). The least decrease in the apical portion was observed in the DFDBA group (0.34 ± 0.39 mm²). Conclusion: The present study showed better socket preservation subsequent to the application of DFDBA and PRGF combination in comparison with the two other groups. However, the difference was not statistically significant. PMID:25225559

  14. Socket preservation using demineralized freezed dried bone allograft with and without plasma rich in growth factor: A canine study

    Directory of Open Access Journals (Sweden)

    Ahmad Mogharehabed

    2014-01-01

    Full Text Available Background: The accelerating effect of plasma rich in growth factors (PRGFs in the healing of extraction sockets has been demonstrated by some studies. The aim of the present study was to histologically and histomorphometrically evaluate whether bone formation would increase by the combined use of PRGF and demineralized freeze-dried bone allograft (DFDBA. Materials and Methods: In four female dogs, the distal root of the second, third and fourth lower premolars were extracted bilaterally and the mesial roots were preserved. The extraction sockets were randomly divided into DFDBA + PRGF, DFDBA + saline or control groups. Two dogs were sacrificed after 2 weeks and two dogs were sacrificed after 6 weeks. The extraction sockets were evaluated from both histological and histomorphometrical aspects. The data were analyzed by Mann-Whitney followed by Kruskal-Wallis tests using the Statistical Package for the Social Sciences version 20 (SPSS Inc., Chicago, IL, USA. Significant levels were set at 0.05. Results: The least decrease in socket height was observed in the DFDBA + PRGF group (0.73 ± 0.42 mm. The least decrease in the coronal portion was observed in the DFDBA + PRGF group (1.38 ± 1.35 mm². The least decrease in the middle surface was observed in the DFDBA group (0.61 ± 0.80 mm². The least decrease in the apical portion was observed in the DFDBA group (0.34 ± 0.39 mm². Conclusion: The present study showed better socket preservation subsequent to the application of DFDBA and PRGF combination in comparison with the two other groups. However, the difference was not statistically significant.

  15. Antioxidant and lipoxygenase activities of polyphenol extracts from oat brans treated with polysaccharide degrading enzymes

    Directory of Open Access Journals (Sweden)

    Nisita Ratnasari

    2017-07-01

    Full Text Available This study used polysaccharide degrading enzymes and protein precipitation to extract polyphenols from oats and to determine their bioactivity. Duplicate oat brans were treated with viscozyme (Vis, cellulase (Cel or no enzyme (control, CTL then, proteins were removed in one set (Vis1, Cel1, CTL1 and not in the other (Vis2, Cel2, CTL2. HPLC analyses showed that for cellulase treated brans, precipitation of proteins increased phenolic acids and avenanthramides by 14%. Meanwhile, a decreased of 67% and 20% respectively was found for viscozyme and control brans. The effect of protein precipitation on soluble polyphenols is therefore dependent of the carbohydrase, as proteins with different compositions will interact differently with other molecules. Radical scavenging data showed that Cel1 and Vis1 had higher quenching effects on ROO• radicals with activities of 22.1 ± 0.8 and 23.5 ± 1.2 μM Trolox Equivalents/g defatted brans. Meanwhile, CTL2 had the highest HO• radicals inhibition (49.4 ± 2.8% compared to 10.8–32.3% for others. Samples that highly inhibited lipoxygenase (LOX, an enzyme involved in lipid oxidation were Cel1 (23.4 ± 2.3% and CTL1 (18 ± 0.4%.

  16. Antidepressant and anxiolytic activity of Lavandula officinalis aerial parts hydroalcoholic extract in scopolamine-treated rats.

    Science.gov (United States)

    Rahmati, Batool; Kiasalari, Zahra; Roghani, Mehrdad; Khalili, Mohsen; Ansari, Fariba

    2017-12-01

    Anxiety and depression are common in Alzheimer's disease (AD). Despite some evidence, it is difficult to confirm Lavandula officinalis Chaix ex Vill (Lamiaceae) as an anxiolytic and antidepressant drug. The effects of L. officinalis extract were studied in scopolamine-induced memory impairment, anxiety and depression-like behaviour. Male NMRI rats were divided into control, scopolamine alone-treated group received scopolamine (0.1 mg/kg) intraperitoneally (i.p.), daily and 30 min prior to performing behavioural testing on test day, for 12 continuous days and extract pretreated groups received aerial parts hydro alcoholic extract (i.p.) (100, 200 and 400 mg/kg), 30 min before each scopolamine injection. Memory impairment was assessed by Y-maze task, while, elevated plus maze and forced swimming test were used to measure anxiolytic and antidepressive-like activity. Spontaneous alternation percentage in Y maze is reduced by scopolamine (36.42 ± 2.60) (p ≤ 0.001), whereas lavender (200 and 400 mg/kg) enhanced it (83.12 ± 5.20 and 95 ± 11.08, respectively) (p ≤ 0.05). Also, lavender pretreatment in 200 and 400 mg/kg enhanced time spent on the open arms (15.4 ± 3.37 and 32.1 ± 3.46, respectively) (p ≤ 0.001). On the contrary, while immobility time was enhanced by scopolamine (296 ± 4.70), 100, 200 and 400 mg/kg lavender reduced it (193.88 ± 22.42, 73.3 ± 8.25 and 35.2 ± 4.22, respectively) in a dose-dependent manner (p ≤ 0.001). Lavender extracts improved scopolamine-induced memory impairment and also reduced anxiety and depression-like behaviour in a dose-dependent manner.

  17. Anti-inflammatory effects of enzyme-treated asparagus extract and its constituents in hepatocytes

    Directory of Open Access Journals (Sweden)

    Mikio Nishizawa

    2016-02-01

    Full Text Available Background:Asparagus (Asparagus officinalisL. is one of the most ancient vegetablesin the world, andis rich in asparagine. Enzyme-treated asparagus extract (ETAS™; Amino Up Chemical Co., Ltd., Sapporo, Japan is the final product of enzyme-treatment of asparagus stems and subsequent extraction. Two constituents were purified from ETAS and identified: 5-hydroxymethyl-2-furfural (HMF, an abundant constituent, and (S-asfural, a novel constituent, which is a derivative of HMF. ETAS has been reported to increase the expression of heat shock proteins (HSPs, which are essential for the repair or removal of defective proteins. The expression of Hspfamily genes is regulated by the transcription factor heat shock factor 1 (HSF1. It is unknown whether ETAS and its constituents elicit anti-inflammatory effects, such as the suppression of nitric oxide (NO, an inflammatory mediator synthesized by inducible nitric oxide synthase (iNOS in interleukin (IL-1β-treated hepatocytes. Objective:To examine the anti-inflammatory effects of ETAS, we treated rat hepatocytes with ETAS, or its constituents (S-asfural or HMF, and IL-1β, beforethen analyzingthe expression of the iNOSgene and other genes involved in inflammation.Methods:Primary cultured rat hepatocytes were prepared by collagenase perfusion. ETAS, (S-asfural, or HMF was added to the medium with IL-1β and incubated at 37 °C. When necessary, an inhibitor of HSF1 was added. NO in the medium was measured by the Griess method, and the half-maximal inhibitory concentration (IC50 values were determined. To analyze the mRNA expression, a reverse transcription-quantitative polymerase chain reaction was performed. Antibody arrays were used to determine the levels of cytokines and chemokines in the medium.Results:ETAS suppressed NO production in IL-1β-treated hepatocytes without causing cytotoxicity. ETAS decreased the levels of both iNOS mRNA and the antisense transcript, whereas it increased the levels of Hsf1 m

  18. Evaluation of pomegranate rind (Punica granatum hydroethanolic extract on blood parameters in male mice treated by Irinotecan Hcl

    Directory of Open Access Journals (Sweden)

    N Mirazi

    2015-05-01

    Full Text Available Background & aim: Irinotecan Hcl is the first order drug for some neoplasm treatment in patients. Irinotecan Hcl has side effects on blood such as anemia and leukopeny. The aim of this study was to evaluate erythropoetic effects of the pomegranate hydroethanolic extract were examined on mice which treated by irinotecan Hcl. Methods: In this experimental study, 49 male mice (25-30 g were divided in 7 groups (control, sham, treated by irinotecan Hcl (100 mg/kg, treated by pomegranate extract (100 and 400 mg/kg, i.p, daily for one week and treated by irinotecan Hcl plus pomegranate extract (100 and 400 mg/kg, i.p, daily for one week randomly. Anemia induced by administration of irinotecan in the experimental animal. At the end of experiment the blood samples were collected by cardiac puncture method and analized for RBC, WBC, Hb, Hct parameters. Data were analyzed using one-way ANOVA and Tukey’s test. Results: The results of this study showed that irinotecan has affected on blood factors and cause to significance decrese compared with control group (p<0.001. Also groups which treated with pomegranate extract (100 and 400 mg/kg significantly reduce the side effects of irinotecan and cause to increasing in blood factors (p<0.001. The number of WBC counts in the group which received Irinotecan (100 kg significantly decreased as compared with the control group (p<0.001. Irinotecan affected on blood Hb level and cause to significant decrease compared with control group. Groups which received pomegranate extract (100 and 400 kg had positive effect and significantly increased the blood Hb levels as compared to controls (p<0.001. Conclusion: These results showed that consumption of pomegranate rind extract in a dose-dependent manner has protective effect on blood parameters in mice which treated with Irinotecan Hcl.

  19. Enzyme-treated asparagus extract promotes expression of heat shock protein and exerts antistress effects.

    Science.gov (United States)

    Ito, Tomohiro; Maeda, Takahiro; Goto, Kazunori; Miura, Takehito; Wakame, Koji; Nishioka, Hiroshi; Sato, Atsuya

    2014-03-01

    A novel enzyme-treated asparagus extract (ETAS) has been developed as a functional material produced from asparagus stem. Studies were conducted to determine the effect of ETAS on heat shock protein 70 (HSP70) expression and alleviation of stress. HeLa cells were treated with ETAS, and HSP70 mRNA and protein levels were measured using a reverse transcription-polymerase chain reaction (RT-PCR) assay and an enzyme-linked immunosorbent assay (ELISA), respectively. ETAS showed significant increases in HSP70 mRNA at more than 0.125 mg/mL and the protein at more than 1.0 mg/mL. The antistress effect was evaluated in a murine sleep-deprivation model. A sleep-deprivation stress load resulted in elevation of blood corticosterone and lipid peroxide concentrations, while supplementation with ETAS at 200 and 1000 mg/kg body weight was associated with significantly reduced levels of both stress markers, which were in the normal range. The HSP70 protein expression level in mice subjected to sleep-deprivation stress and supplemented with ETAS was significantly enhanced in stomach, liver, and kidney, compared to ETAS-untreated mice. A preliminary and small-sized human study was conducted among healthy volunteers consuming up to 150 mg/d of ETAS daily for 7 d. The mRNA expression of HSP70 in peripheral leukocytes was significantly elevated at intakes of 100 or 150 mg/d, compared to their baseline levels. Since HSP70 is known to be a stress-related protein and its induction leads to cytoprotection, the present results suggest that ETAS might exert antistress effects under stressful conditions, resulting from enhancement of HSP70 expression. © 2014 Institute of Food Technologists®

  20. Role of Quzhou Fructus Aurantii Extract in Preventing and Treating Acute Lung Injury and Inflammation.

    Science.gov (United States)

    Li, Lili; Zhang, Sheng; Xin, Yanfei; Sun, Junying; Xie, Feng; Yang, Lin; Chen, Zhiqin; Chen, Hao; Liu, Fang; Xuan, Yaoxian; You, Zhenqiang

    2018-01-26

    Quzhou Fructus Aurantii (QFA) is an authentic herb of local varieties in Zhejiang, China, which is usually used to treat gastrointestinal illnesses, but its effects on respiratory inflammation have not been reported yet. In our study, the anti-inflammatory activity of QFA extract (QFAE) was evaluated on copper sulfate pentahydrate (CuSO 4 ·5H 2 O)-induced transgenic neutrophil fluorescent zebrafish model. QFAE showed a significant effect of anti-inflammation in CuSO 4 ·5H 2 O-induced zebrafish by reducing the neutrophil number in the inflammatory site. We investigated the anti-inflammatory activity of QFAE on lipopolysaccharide (LPS)-induced acute lung injury (ALI) mice models and RAW 264.7 cells. QFAE had an anti-inflammatory effect on reducing total cells, neutrophils, and macrophages in BALF and attenuated alveolus collapse, neutrophils infiltration, lung W/D ratio, myeloperoxidase (MPO) protein expression and other pulmonary histological changes in lung tissues, as well as hematological changes. Levels of pro-inflammatory cytokines, including TNF, IL-6, IFN-γ, MCP-1, and IL-12p70, were decreased, whereas anti-inflammatory cytokine IL-10 was increased after treatment with QFAE both in vivo and in vitro. In summary, our results suggested that QFAE had apparent anti-inflammatory effects on CuSO 4 ·5H 2 O-induced zebrafish, LPS-induced ALI mice, and RAW 264.7 cells. Furthermore, QFAE may be a therapeutic drug to treat ALI/ARDS and other respiratory inflammations.

  1. Application of Moringa Oleifera seed extract to treat coffee fermentation wastewater.

    Science.gov (United States)

    Garde, William K; Buchberger, Steven G; Wendell, David; Kupferle, Margaret J

    2017-05-05

    Wastewater generated from wet processing of coffee cherries degrades stream water quality downstream of processing mills and impacts human health. The widespread popularity of coffee as an export makes this a global problem, although the immediate impact is local. Approximately 40% of all coffee around the world is wet processed, producing wastewater rich in organic nutrients that can be hazardous to aquatic systems. Moringa Oleifera Seed Extract (MOSE) offers promise as a local and affordable "appropriate" coagulation technology for aiding in the treatment of coffee wastewater. Field research was conducted at the Kauai Coffee Company to investigate the application of MOSE to treat coffee fermentation wastewater (CFW). Coagulation tests were conducted at five pH CFW levels (3-7) and MOSE doses (0-4g/L). After settling, TSS, COD, nitrate, nitrite, total nitrogen, and pH of supernatant from each test were measured. MOSE reduced TSS, COD, nitrate, and nitrite in CFW to varying degrees dependent on pH and dose applied. TSS removal ranged from 8% to 54%. Insoluble COD removal ranged from 26% to 100% and total COD removal ranged from 1% to 25%. Nitrate and nitrite reduction ranged from 20% to 100%. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Tissue injuries of wistar rats treated with hydroalcoholic extract of Sonchus oleraceus L.

    Directory of Open Access Journals (Sweden)

    Franciele Carla Prichoa

    2011-09-01

    Full Text Available The use of plant species is emerging as an important alternative in the treatment of injuries. Therefore, the extract of Sonchus oleraceus 10% was employed in the repair of skin lesions. A total of 36 male Wistar rats were subjected to a punch injury and divided into three groups: a negative control, receiving no treatment, a positive control, treated with Dersani, and the experimental group treated with the extract. The injury was assessed macroscopically and microscopically. Morphometric data was collected at the 3rd, 5th and 7th postoperative day, and the experimental group showed greater changes in shrinkage of the lesion compared to control groups. On the 3rd postoperative day, the injury in the experimental group showed less necrotic tissue, lower slough and more granulation tissue in relation to the positive control group. On the 7th and 10th postoperative day, the injury in the experimental group showed lower slough compared to the positive control group. Microscopic analysis of lesions on the 5th postoperative day revealed increased fibroplasia in the experimental group compared to control groups, while on the 14th postoperative day less neovascularization was evident in the experimental group and increased formation of hair follicles in the negative control group. The extract of S. oleraceus provided tissue repair in accordance with normal physiological patterns thus confirming empirical evidence for its use.O emprego de espécies vegetais vem surgindo como alternativa no tratamento de lesões. Dessa forma, foi utilizado o extrato hidroalcoólico de Sonchus oleraceus a 10% na reparação de lesões cutâneas. Trinta e seis ratos machos Wistar, foram submetidos a uma lesão com "punch" e distribuídos em três grupos: controle negativo, não recebeu tratamento; controle positivo, tratado com Dersani; e o experimental, tratado com extrato. A lesão foi avaliada macroscopicamente e microscopicamente. Os dados morfométricos mostraram que

  3. Fatigue evaluation of socket welded piping in nuclear power plant

    International Nuclear Information System (INIS)

    Vecchio, R.S.

    1996-01-01

    Fatigue failures in piping systems occur, almost without exception, at the welded connections. In nuclear power plant systems, such failures occur predominantly at the socket welds of small diameter piping ad fillet attachment welds under high-cycle vibratory conditions. Nearly all socket weld fatigue failures are identified by leaks which, though not high in volume, generally are costly due to attendant radiological contamination. Such fatigue cracking was recently identified in the 3/4 in. diameter recirculation and relief piping socket welds from the reactor coolant system (RCS) charging pumps at a nuclear power plant. Consequently, a fatigue evaluation was performed to determine the cause of cracking and provide an acceptable repair. Socket weld fatigue life was evaluated using S-N type fatigue life curves for welded structures developed by AASHTO and the assessment of an effective cyclic stress range adjacent to each socket weld. Based on the calculated effective tress ranges and assignment of the socket weld details to the appropriate AASHTO S-N curves, the socket weld fatigue lives were calculated and found to be in excellent agreement with the accumulated cyclic life to-date

  4. A smartphone photogrammetry method for digitizing prosthetic socket interiors.

    Science.gov (United States)

    Hernandez, Amaia; Lemaire, Edward

    2017-04-01

    Prosthetic CAD/CAM systems require accurate 3D limb models; however, difficulties arise when working from the person's socket since current 3D scanners have difficulties scanning socket interiors. While dedicated scanners exist, they are expensive and the cost may be prohibitive for a limited number of scans per year. A low-cost and accessible photogrammetry method for socket interior digitization is proposed, using a smartphone camera and cloud-based photogrammetry services. 15 two-dimensional images of the socket's interior are captured using a smartphone camera. A 3D model is generated using cloud-based software. Linear measurements were comparing between sockets and the related 3D models. 3D reconstruction accuracy averaged 2.6 ± 2.0 mm and 0.086 ± 0.078 L, which was less accurate than models obtained by high quality 3D scanners. However, this method would provide a viable 3D digital socket reproduction that is accessible and low-cost, after processing in prosthetic CAD software. Clinical relevance The described method provides a low-cost and accessible means to digitize a socket interior for use in prosthetic CAD/CAM systems, employing a smartphone camera and cloud-based photogrammetry software.

  5. Development of Managing Program for Small Bore Piping Socket Weld on the Secondary System of NPP

    International Nuclear Information System (INIS)

    Lee, Dong Min; Ryu, Jong Myeong; Cho, Hong Seok; Cho, Ki Hyun; Choi, Sang Hoon; Kim, Man Hee

    2011-01-01

    Kori unit 3 had stopped operation due to leakage at steam generator drain line socket weld on June 6th, 2008. The cause of socket weld damage was known as welding defect and fatigue by vibration under normal operation. With above reason, the government has been required developing management program for small bore piping socket weld. Therefore, we have developed the socket weld management program to secure reliability and soundness of socket welds which are located at all domestic NPPs

  6. Study on crack generation at root of socket welds

    International Nuclear Information System (INIS)

    Iida, K.; Matsuda, F.; Sato, M.; Nayama, M.; Akitomo, N.

    1994-01-01

    A program to investigate the fatigue strength of the socket welded joint has been carried out by the Japan Power Engineering and Inspection Corporation (JAPEIC) under contract with the Ministry of International Trade and Industry (MITI). In this program, many types of socket welded joints were prepared with parameters varied, and the small cracks were observed at root sections of some welded joints. This study has been carried out to make clear the factors on crack generation at the root sections of the socket welded joints and to understand the cause and mechanism of crack generation. (orig.)

  7. Residual stress measurement in socket welded joints by neutron diffraction

    International Nuclear Information System (INIS)

    Hayashi, Makoto; Ishiwata, Masayuki; Minakawa, Noriaki; Funahashi, Satoru.

    1995-01-01

    Neutron diffraction measurements of lattice spacings provide the spatial map of residual stress near welds in ferritic steel socket joints. The high tensile stress greater than 200 MPa was found in the fusion and heat-affected zones in the hoop direction. However, the highest tensile stress in the axial direction at the weld root was about 110 MPa relatively lower than the expected value from the fatigue test results. The balancing compressive stress was found near the surface of the socket weld fusion zone. Heat treatment at 625degC for 2 hours was sufficient for the relief of residual stress in socket welds. (author)

  8. Anophthalmic socket: choice of orbital implants for reconstruction

    Directory of Open Access Journals (Sweden)

    Silvana Artioli Schellini

    2015-08-01

    Full Text Available ABSTRACTThis literature review considers the treatment of an anophthalmic socket and the controversial aspects of the implants used to restore the lost volume after enucleation or evisceration, including the different materials employed and the main problems encountered during anophthalmic socket reconstruction. Since the 1980s, when integrated implants were proposed, there has been much controversy about what is the best implant for restoring the lost volume in an anophthalmic socket: integrated or non-integrated implants. Thus, we present this literature review to provide guidance to doctors and consumers

  9. 8 Pin RIC Socket for Hearing Aid Applications

    DEFF Research Database (Denmark)

    Islam, Aminul; Hansen, Hans Nørgaard; Davids, Søren

    2012-01-01

    process and the other one is fully automated process. This paper presents the entire process chain for both the concepts and makes a comparative analysis based on the experimental investigation and validation. The work presented here can be a source of valuable information for industrial users...... of them. 8 Pin RIC Socket is a functionally versatile product which can combine many different functions and presents many advantages compared with the previous 3 Pin RIC Socket. For the demonstrator production of the new Socket, two different production concepts were chosen- one based on semi-automated...

  10. Influence of Leukocyte- and Platelet-Rich Fibrin (L-PRF) in the Healing of Simple Postextraction Sockets: A Split-Mouth Study

    Science.gov (United States)

    Riccitiello, Francesco; Tia, Mariano; di Lauro, Alessandro; Sammartino, Gilberto

    2015-01-01

    The aim of this study was to evaluate the effects of leukocyte- and platelet-rich fibrin (L-PRF) on the pain and soft tissue healing after tooth extractions. Twenty-six patients (9 males and 17 females) were treated with multiple extractions (2 to 8), with a total of 108 extractions. This was an exploratory single blinded randomized clinical trial with a split-mouth design. The pain after the surgery was assessed in each patient by the VAS scale (1 to 10) at intervals of 24-48-72-96 hours. The soft tissue healing was clinically evaluated at 3, 7, 14, and 21 days after surgery by the same examiner surgeon, using the modified Healing Index (4 to 12). The mean value of postextraction pain was 3.2 ± 0.3 in the experimental sides and 4.1 ± 0.1 in the control sides. After 7 days from the extractions, the values of modified Healing Index in the experimental and control groups were, respectively, 4.8 ± 0.6 and 5.1 ± 0.9. The use of L-PRF in postextraction sockets filling can be proposed as a useful procedure in order to manage the postoperative pain and to promote the soft tissue healing process, reducing the early adverse effects of the inflammation. PMID:26273612

  11. Influence of Leukocyte- and Platelet-Rich Fibrin (L-PRF) in the Healing of Simple Postextraction Sockets: A Split-Mouth Study.

    Science.gov (United States)

    Marenzi, Gaetano; Riccitiello, Francesco; Tia, Mariano; di Lauro, Alessandro; Sammartino, Gilberto

    2015-01-01

    The aim of this study was to evaluate the effects of leukocyte- and platelet-rich fibrin (L-PRF) on the pain and soft tissue healing after tooth extractions. Twenty-six patients (9 males and 17 females) were treated with multiple extractions (2 to 8), with a total of 108 extractions. This was an exploratory single blinded randomized clinical trial with a split-mouth design. The pain after the surgery was assessed in each patient by the VAS scale (1 to 10) at intervals of 24-48-72-96 hours. The soft tissue healing was clinically evaluated at 3, 7, 14, and 21 days after surgery by the same examiner surgeon, using the modified Healing Index (4 to 12). The mean value of postextraction pain was 3.2 ± 0.3 in the experimental sides and 4.1 ± 0.1 in the control sides. After 7 days from the extractions, the values of modified Healing Index in the experimental and control groups were, respectively, 4.8 ± 0.6 and 5.1 ± 0.9. The use of L-PRF in postextraction sockets filling can be proposed as a useful procedure in order to manage the postoperative pain and to promote the soft tissue healing process, reducing the early adverse effects of the inflammation.

  12. Effect of Enzyme-Treated Asparagus Extract (ETAS) on Psychological Stress in Healthy Individuals.

    Science.gov (United States)

    Takanari, Jun; Nakahigashi, Jun; Sato, Atsuya; Waki, Hideaki; Miyazaki, Shogo; Uebaba, Kazuo; Hisajima, Tatsuya

    2016-01-01

    The aim of this study was to examine the effectiveness of Enzyme-Treated Asparagus Extract (ETAS) on improving stress response. A randomized, double-blind, placebo-controlled cross-over trial was undertaken in healthy volunteers. ETAS (150 mg/d) or a placebo was consumed for 28 d, with a washout period. Psychological parameters were examined using a self-report scale questionnaire and psychological stress was applied using the Uchida-Kraepelin (U-K) test. During the stress load, autonomic nervous function was analyzed. After the stress load, a profile of mood states (POMS) psychological rating was performed, and serum cortisol, plasma catecholamine, salivary secretory immunoglobulin A (sIgA), and salivary cortisol were analyzed. ETAS intake improved the self-reported rating for the items "Feel tired," "Hard to get up," and "Feel heavy" in the psychological questionnaire; ameliorated the self-reported rating for the items "Depression-Dejection" and "Fatigue" in the POMS questionnaire; and increased salivary sIgA levels after the U-K test. In contrast, serum and salivary cortisol levels, and plasma catecholamine did not change. During the U-K test, ETAS significantly upregulated the sympathetic nerve activity. Furthermore, ETAS intake significantly increased the number of answers and the number of correct answers in the U-K test, suggesting that it might improve office work performance with swiftness and accuracy under stressful conditions. In conclusion, ETAS supplementation reduced feelings of dysphoria and fatigue, ameliorated quality of sleep, and enhanced stress-load performance as well as promoted stress response by increasing salivary sIgA levels. These data suggest ETAS intake may exert beneficial effects, resulting from well-controlled stress management, in healthy individuals.

  13. Skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances and lower premolar extractions.

    Science.gov (United States)

    Abu Alhaija, Elham S J; Al-Khateeb, Susan N

    2011-05-01

    Mild Class III malocciusions can be treated by upper incisor proclination and lower incisor retroclination following extraction of the lower first premolars. To compare the skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances, Class III traction and lower first premolar extractions with the changes in a group of untreated Class III patients. The Treatment group consisted of 30 Class III patients (Mean age 13.69 +/- 1.48 years) who were treated by upper and lower fixed appliances, Class III intermaxillary traction and lower first premolar extractions for 2.88 +/- 1.12 years. The Control group consisted of 20 untreated Class III patients (Mean age 13.51 +/- 0.95) matched for age and gender. The T1 to T2 changes in the treated and untreated groups were compared using a paired t-test while differences between the two groups were compared with an independent t-test. During treatment, the upper incisors were proclined about 1 degree and the lower incisors were retroclined 8 degrees. Small, but statistically significant changes in SNB, Wits and the overlying soft tissues accompanied the changes in incisor inclination. At the end of treatment a positive overbite and overjet were achieved. The increase in lower facial height in the Treatment group was comparable with the change in the Control group. A range of mild to moderate Class III malocclusions can be treated by dentoalveolar compensation.

  14. Some hematological parameters of Wistar rats treated with Chromolaena odorata leave extracts

    Directory of Open Access Journals (Sweden)

    Henshaw Uchechi Okoroiwu

    2017-10-01

    Full Text Available This study was designed to investigate the effects of the different extracts of Chromolaena odorata leave on the hematopoietic system of Wistar rats. Solvent extraction was used for the ethanol and aqueous extractions while decoction method was used for the crude extraction. Fifty Wistar rats of both sexes weighing 140-180 g were used for this study. They were divided into ten groups each containing five rats. The animals were fed the extracts by oral gavage once daily for 21 days. Blood sample was collected via cardiac artery. Hematological parameters were analyzed using automation method. The ethanol extract gave the highest extract yield. The aqueous, ethanol and crude extraction had median lethal toxicity (LD50 of 2738.6 mg/kg, 1581.1 mg/kg and 224.7 mg/kg, respectively. Significant difference (P<0.05 in the total white blood cell count was observed in the 75 mg/kg ethanol and 300 mg/kg crude extracts when compared with control group. Significant difference (P<0.05 in the hemoglobin concentration was observed in the 150 mg/kg ethanol extracts when compared with the control group. Significant difference (P<0.05 in the packed cell volume was seen in the 75 mg/kg aqueous, 150 mg/kg aqueous and 75 mg/kg ethanol extracts in respect to the control group. The mean cell volume, the mean platelet volume and platelet large cell ratio of the 75 mg/kg aqueous extract were significantly different (P<0.05 when compared with the control group. The present study showed possible treatment-induced hematopoietic function of C. odorata leave extracts.

  15. Experimental dry socket: microscopic and molecular evaluation of two treatment modalities Alveolite experimental: análise microscópica e molecular de duas modalidades de tratamento

    Directory of Open Access Journals (Sweden)

    Camila Lopes Cardoso

    2011-10-01

    Full Text Available PURPOSE: To evaluate two treatment modalities of dry socket in rats and to discuss the first findings of the molecular analysis in this experimental model. METHODS: 84 rats underwent a tooth extraction were divided in 4 groups: I-uninfected socket (control, II-infected socket without any treatment, III-infected socket treated with irrigation of 2% sodium iodide and 3% hydrogen peroxide solution, IV-infected socket submitted to curettage, irrigation with physiological saline solution and fulfilled with metronidazole paste as base. The groups were subdivided in postoperative sacrifice periods: 6/15/28 days. A quantitative and a qualitative microscopic analysis was performed. Also, a quantitative analysis was performed using a RealTimePCR to evaluate the genes expression in the wound healing: Collagen Type I/COL-I, vascular endothelial growth factor/VEGF, osteocalcin/OCN, alkaline phosphatase/ALP, runt-related transcription factor 2/RUNX2 and tumor necrosis factor alpha/TNF-α. RESULTS: The group I showed higher bone formation, followed by groups IV, III, II respectively. The group II presented higher inflammatory infiltrate and the wound healing was delayed compared with other groups. It was obtained a significant positive correlation between bone neoformation and the expression of OCN and RUNX2, inflammatory infiltrate with TNF-α and a negative correlation between bone neoformation and TNF-α. CONCLUSION: No significant difference was found between the treatments.OBJETIVO: Avaliar duas modalidades de tratamento da alveolite em ratos e discutir os primeiros achados de uma análise molecular neste modelo experimental. MÉTODOS: 84 ratos foram submetidos a uma extração dentária e foram divididos em quatro grupos: I- alvéolo não infectado (controle, II- alvéolo infectado sem tratamento, III- alvéolo infectado tratado com irrigação de iodeto de sódio a 2% e solução de peróxido de hidrogênio a 3%, IV- alvéolo infectado submetido

  16. Natural gas from the socket. A surprising novelty

    International Nuclear Information System (INIS)

    Bakker, P.

    1997-01-01

    A Dutch public utility (Obragas) introduced a new way to supply gas for their household clients in Helmond, Netherlands: the gas wall socket, which is in use in Japan for years. It appears that the Netherlands will follow. 6 ills

  17. Manufacture of sockets of volume compensators in nuclear power plants

    International Nuclear Information System (INIS)

    Andreev, V.P.; Tshekotilo, L.V.; Shevtshenko, N.T.; Sevruk, A.N.; Wolacek, W.J.; Irsicek, L.; Vrbensky, J.

    1982-01-01

    Experience is reported with regard to electroslag casting of sockets of volume compensators or steam separators used in nuclear power plants. According to the method the raw pieces are casted directly at the surface of the enclosures

  18. Zero insertion force socket for photoactivation patient treatment system

    International Nuclear Information System (INIS)

    Troutner, V.H.

    1988-01-01

    Automatic operating zero insertion force socket for use in a photoactivatable reagent treatment system wherein photoactivatable agents, in contact with patient blood cells, are irradiated extracorporeally and then returned to the patient

  19. The possible nature of socket stars in H II regions

    International Nuclear Information System (INIS)

    Castelaz, M.W.

    1990-01-01

    Close inspection of faint stars (V of about 14 mag) in H II regions show that they appear to be surrounded by circumstellar envelopes of about 10 arcsecs in diameter (as reported by Feibelman in 1989). The present premise is that the sockets are envelopes of obscuring dust which should emit a measurable amount of infrared radiation based on a simple thermal equilibrium model. A search of literature shows that, of 36 socket stars listed by Feibelman, 17 have been measured in the infrared. Of the 17, 14 show excess IR emission. This is very strong evidence that the socket stars are really stars with circumstellar envelopes. Socket stars may be a new type of astronomical object or well-known astronomical objects in environments or evolutionary states not previously seen. 22 refs

  20. Broadband from the socket and privatization of power distribution networks

    International Nuclear Information System (INIS)

    Aalbers, R.; Baarsma, B.; Poort, J.

    2005-01-01

    Attention is paid to the consequences for the Dutch market of the recommendation of the European Commission to introduce Power Line Communication (PLC) in the EU member states. PLC makes it possible to access the internet via sockets [nl

  1. Socket weld integrity in nuclear piping under fatigue loading condition

    International Nuclear Information System (INIS)

    Choi, Young Hwan; Choi, Sun Yeong

    2007-01-01

    The purpose of this paper is to evaluate the integrity of socket weld in nuclear piping under the fatigue loading. The integrity of socket weld is regarded as a safety concern in nuclear power plants because many failures have been world-widely reported in the socket weld. Recently, socket weld failures in the chemical and volume control system (CVCS) and the primary sampling system (PSS) were reported in Korean nuclear power plants. The root causes of the socket weld failures were known as the fatigue due to the pressure and/or temperature loading transients and the vibration during the plant operation. The ASME boiler and pressure vessel (B and PV) Code Sec. III requires 1/16 in. gap between the pipe and fitting in the socket weld with the weld leg size of 1.09 x t 1 , where t 1 is the pipe wall thickness. Many failure cases, however, showed that the gap requirement was not satisfied. In addition, industry has demanded the reduction of weld leg size from 1.09 x t 1 to 0.75 x t 1 . In this paper, the socket weld integrity under the fatigue loading was evaluated using three-dimensional finite element analysis considering the requirements in the ASME Code. Three types of loading conditions such as the deflection due to vibration, the pressure transient ranging from P = 0 to 15.51 MPa, and the thermal transient ranging from T = 25 to 288 deg. C were considered. The results are as follows; (1) the socket weld is susceptible to the vibration where the vibration levels exceed the requirement in the ASME operation and maintenance (OM) code. (2) The effect of pressure or temperature transient load on socket weld in CVCS and PSS is not significant owing to the low frequency of transient during plant operation. (3) 'No gap' is very risky to the socket weld integrity for the systems having the vibration condition to exceed the requirement specified in the ASME OM Code and/or the transient loading condition from P = 0 and T = 25 deg. C to P = 15.51 MPa and T = 288 deg. C. (4

  2. Fatigue evaluation for the socket weld in nuclear power plants

    International Nuclear Information System (INIS)

    Choi, Young Hwan; Choi, Sun Yeong; Huh, Nam Soo

    2004-01-01

    The operating experience showed that the fatigue is one of the major piping failure mechanisms in nuclear power plants (NPPs). The pressure and/or temperature loading transients, the vibration, and the mechanical cyclic loading during the plant operation may induce the fatigue failure in the nuclear piping. Recently, many fatigue piping failure occurred at the socket weld area have been widely reported. Many failure cases showed that the gap requirement between the pipe and fitting in the socket weld was not satisfied though the ASME Code Sec. Requires 1/16 inch gap in the socket weld. The ASME Code OM also limits the vibration level of the piping system, but some failure cases showed the limitation was not satisfied during the plant operation. In this paper, the fatigue behavior of the socket weld in the nuclear piping was estimated by using the three dimensional finite element method. The results are as follows. The socket weld is susceptible to the vibration if the vibration levels exceed the requirement in the ASME Code OM. The effect of the pressure or temperature transient load on the socket weld in NPPs is not significant because of the very low frequency of the transient during the plant lifetime operation. 'No gap' is very risky to the socket weld integrity for the specific systems having the vibration condition to exceed the requirement in the ASME OM Code and/or the transient loading condition. The reduction of the weld leg size from 1.09 * t 1 to 0.75 * t 1 can affect severely on the socket weld integrity

  3. Bone Regeneration of Hydroxyapatite with Granular Form or Porous Scaffold in Canine Alveolar Sockets

    Science.gov (United States)

    JANG, SEOK JIN; KIM, SE EUN; HAN, TAE SUNG; SON, JUN SIK; KANG, SEONG SOO; CHOI, SEOK HWA

    2017-01-01

    This study was undertaken to assess bone regeneration using hydroxyapatite (HA). The primary focus was comparison of bone regeneration between granular HA (gHA) forms and porous HA (pHA) scaffold. The extracted canine alveolar sockets were divided with three groups: control, gHA and pHA. Osteogenic effect in the gHA and pHA groups showed bone-specific surface and bone mineral density to be significantly higher than that of the control group (psocket healing. For new bone formation during 8 weeks' post-implantation, HA with porous scaffold was superior to the granular form of HA. PMID:28438860

  4. Is rooftop solar PV at socket parity without subsidies?

    International Nuclear Information System (INIS)

    Hagerman, Shelly; Jaramillo, Paulina; Morgan, M. Granger

    2016-01-01

    Installations of rooftop solar photovoltaic (PV) technology in the United States have increased dramatically in recent years, in large part because of state and federal subsidies. In the future, such subsidies may be reduced or eliminated. From the homeowner's perspective, solar PV is competitive when it can produce electricity at a cost equivalent to the retail electricity rate, a condition sometimes referred to as “socket parity”. In assessing the economic viability of residential solar PV, most existing literature considers only a few locations and fails to consider the differences in PV system cost and electricity prices that exist across the U.S. We combined insolation data from more than 1000 locations, installation costs by region, and county-level utility rates to provide a more complete economic assessment of rooftop solar PV across the U.S. We calculated the break-even electricity prices and evaluated the reductions in installed costs needed to reach socket parity. Among the scenarios considered, we estimate that only Hawaii has achieved socket parity without the use of subsidies. With subsidies, six states reach socket parity, yet widespread parity is still not achieved. We find that high installation costs and financing rates are two of the largest barriers to socket parity. - Highlights: • We evaluate the economic viability of residential rooftop solar PV across the U.S. • Widespread socket parity has not been achieved in the U.S. without subsidies. • Net metering may be critical for the economic viability of rooftop solar PV.

  5. Sperm quality of male rats treated with aqueous extract of Enantia ...

    African Journals Online (AJOL)

    The effects of aqueous extract of Enantia chlorantha were studied on sperm motility, viability and counts in adult albino rats. Oral administration of 50 and 100 mg/kg body weight of the extract daily for a week caused dose-dependent changes in the sperm motility and viability without a significant change in the sperm counts.

  6. The influence of topic and systemic administration of copaiba oil on the alveolar wound healing after tooth extraction in rats.

    Science.gov (United States)

    Dias-da-Silva, Marco A; Pereira, Andresa C; Marin, Miguel Cc; Salgado, Miguel Ac

    2013-10-01

    The Copaiba oil has been used as an auxiliary treatment of inflammations, skin disorders and stomach ulcers, however, in dentistry, this "alternative" medicine has not been investigated yet. The purpose of this study was to evaluate the influence of topic and systemic administration of copaiba oil on the alveolar wound healing after tooth extraction. Twenty-eight wistar male rats had their lower first molar teeth extracted. Subsequently, they were divided in four groups, according to the treatment performed: (a) alveolar socket irrigation with copaiba oil; (b) alveolar socket irrigation with physiological serum; (c) daily gavage with copaiba oil or (d) daily gavage with physiological serum. After the sacrifice, the mandibles were removed and processed in order to obtain decalcified histological sections. The results demonstrated high level of epithelial migration, small number of inflammatory cells and vascular enhancement in the animals which received systemic administration of copaiba oil. The rats treated with topic administration of copaiba oil presented ulcerations and large number of inflammatory cells. An increased bone neoformation was observed in both groups treated with copaiba oil when compared with placebo group. It could be concluded that topic or systemic administration of copaiba oil leads to a better alveolar bone healing, however the topic application on connective tissue should be carefully considered, regarding the whole socket wound healing. Key words:Alveolar wound healing, oil-resin, copaiba.

  7. Characteristic of New Solid-Phase Extraction Sorbent: Activated Carbon Prepared from Rice Husks under Base Treated Condition

    OpenAIRE

    Afrida Kurnia Putri; Wang-Hsien Ding; Han-Wen Kuo

    2012-01-01

    A characterization of activated carbon (ACs) prepared from rice husks (RHs) under base treated condition as a new sorbent for solid-phase extraction (SPE) to extract 4-nonylphenol isomers (4-NPs) in water samples has been done. The ACs prepared from RHs usually exhibits low specific surface area due to its high ash content, but in case of its application for SPE, there are other factors need to be considered, such as the existence of functional groups inside the sorbent, that can enhance inte...

  8. Cuticular surface damage of Ascaridia galli adult worms treated with Veitchia merrillii betel nuts extract in vitro.

    Science.gov (United States)

    Balqis, Ummu; Hambal, Muhammad; Rinidar; Athaillah, Farida; Ismail; Azhar; Vanda, Henni; Darmawi

    2017-07-01

    The objective of this research was to in vitro evaluate the cuticular surface damage of Ascaridia galli adult worms treated with ethanolic extract of betel nuts Veitchia merrillii . Phytochemical screening was done using FeCl 3 , Wagner and Dragendorff reagents, NaOH, MgHCl, and Liebermann-Burchard reaction test. Amount of 16 worms were segregated into four groups with three replicates. Four worms of each group submerged into phosphate buffered saline, 25 mg/ml, and 75 mg/ml crude ethanolic extract of V. merrillii , and 15 mg/ml albendazole. The effect of these extract was observed 40 h after incubation as soon as worms death. The worms were sectioned transversally and were explored for any cuticular histopathological changes in their body surface under microscope. We found that the ethanolic extract of V. merrillii betel nuts contains tannins, alkaloids, flavonoids, triterpenoids, and saponins. The ethanolic extract of betel nuts V. merrillii induces surface alterations caused cuticular damage of A. galli adult worms. We concluded that ethanolic extract of betel nuts V. merrillii possess anthelmintic activity caused cuticular damage of A. galli adult worms.

  9. Shallow Inferior Conjunctival Fornix in Contracted Socket and Anophthalmic Socket Syndrome: A Novel Technique to Deepen the Fornix Using Fascia Lata Strips

    Directory of Open Access Journals (Sweden)

    Mohamed F. K. Ibrahiem

    2016-01-01

    Full Text Available Purpose. To evaluate a new surgical technique using fascia lata to deepen the shallow inferior conjunctival fornix in contracted socket and anophthalmic socket syndrome. Methods. A prospective controlled study in which 24 sockets of 24 patients who were unable to wear and retain their ocular prosthesis due to shallow inferior fornix were enrolled and categorized into anophthalmic socket syndromes (9 patients and contracted sockets (15 patients. Another 24 patients who underwent evisceration or enucleation with healthy sockets and can wear and retain their prosthesis comfortably were chosen as a control group. Deepening of the fornix was performed using fascia lata strips under general anesthesia. Central depth of the inferior fornix was measured preoperatively and postoperatively. Results. A statistically significant improvement of the postoperative central inferior fornix depth was reported which was marked in anophthalmic subgroup. 100% of anophthalmic sockets and 93.3% of contracted sockets achieved satisfactory results during the follow-up period with no postoperative lower eyelid malposition or obvious skin scar. Conclusion. Fascia lata technique is a new alternative and effective procedure to deepen the shallow inferior fornix that can be used in moderate to severe contracted sockets or anophthalmic socket syndrome with minimal lower eyelid or socket complications.

  10. Using Chlorella vulgaris to treat toxic excess sludge extract, and identification of its response mechanism by proteomics approach.

    Science.gov (United States)

    Wang, Lu; Wang, Hualin; Chen, Xiurong; Xu, Yan; Zhou, Tianjun; Wang, Xiaoxiao; Lu, Qian; Ruan, Roger

    2018-04-01

    Chlorella vulgaris was cultivated in varying proportions of toxic sludge extracts obtained from a sequencing batch reactor for treating synthetic wastewater containing chlorophenols. C. vulgaris could reduce the ecotoxicity from sludge extracts, and a positive correlation was noted between ecotoxicity removal and total organic carbon removal. In terms of cell density, the optimal proportion of sludge extracts required for the cultivation of C. vulgaris was lower than 50%. The correlation between protein content in per 10 6 algae and inhibition extent of ecotoxicity of the 5 groups on the day of inoculation (0.9182, p vulgaris produced proteins that involved in the stress response/redox system and energy metabolism/biosynthesis to respond to the toxic environment and some other proteins related to mixotrophic metabolism. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Influence of barley grain treated with alkaline compounds or organic extracts on site and extent of digestion of starch

    Directory of Open Access Journals (Sweden)

    Reza Naseroleslami

    2018-02-01

    Full Text Available Objective Two ex vivo experiments were conducted to verify the effect of barley grain (Nusrat cultivar treated with alkaline compounds (AC including alum, ammonium, and sodium hydroxide or cation-exchanged organic extracts (OE prepared from alfalfa hay, sugar beet pulp and Ulva Fasciata, on extent and digestion of starch. Methods In the first study, the in vitro first order disappearance kinetic parameters of dry matter (DM, crude protein (CP and starch were estimated using a non-linear model (D(t = D(i · e(−kd · time + I, where: D(t = potentially digestible residues at any time, D(i = potentially digestible fraction at any time, kd = fractional rate constant of digestion (/h, I = indigestible fraction at any time. In the second experiment, the ruminal and post-ruminal disappearance of DM, CP, and starch were determined using in situ mobile nylon bag. Results Barley grains treated with alum and alfalfa extract had a higher constant rate of starch digestion (0.11 and 0.09/h than others. Barley grain treated with OE had a higher constant rate of CP digestion and that of treated with AC had a higher constant rate of starch digestion (0.08 and 0.11/h compared with those of the other treatments. The indigestible fraction of starch treated with alum and sugar beet pulp extract was higher than that of the control group (0.24 and 0.25 vs 0.21. Barley grain treated with AC and OE had significant CP disappearance in the rumen, post-rumen and total tract, and also starch disappearance for post-rumen and total tract compared with the untreated (p<0.001. Conclusion This study demonstrated that AC and OE might have positive effects on the starch degradation of the barley grain. In addition, treating barley grain with alum and sugar beet pulp extract could change the site and extend digestion of protein and starch.

  12. Computer-socket manufacturing error: How much before it is clinically apparent?

    Science.gov (United States)

    Sanders, Joan E.; Severance, Michael R.; Allyn, Kathryn J.

    2015-01-01

    The purpose of this research was to pursue quality standards for computer-manufacturing of prosthetic sockets for people with transtibial limb loss. Thirty-three duplicates of study participants’ normally used sockets were fabricated using central fabrication facilities. Socket-manufacturing errors were compared with clinical assessments of socket fit. Of the 33 sockets tested, 23 were deemed clinically to need modification. All 13 sockets with mean radial error (MRE) greater than 0.25 mm were clinically unacceptable, and 11 of those were deemed in need of sizing reduction. Of the remaining 20 sockets, 5 sockets with interquartile range (IQR) greater than 0.40 mm were deemed globally or regionally oversized and in need of modification. Of the remaining 15 sockets, 5 sockets with closed contours of elevated surface normal angle error (SNAE) were deemed clinically to need shape modification at those closed contour locations. The remaining 10 sockets were deemed clinically acceptable and not in need modification. MRE, IQR, and SNAE may serve as effective metrics to characterize quality of computer-manufactured prosthetic sockets, helping facilitate the development of quality standards for the socket manufacturing industry. PMID:22773260

  13. Discharge and infection in retinoblastoma post-enucleation sockets.

    Science.gov (United States)

    Mourits, Daphne L; Hartong, Dyonne T; Budding, Andries E; Bosscha, Machteld I; Tan, H Stevie; Moll, Annette C

    2017-01-01

    To investigate the causes and treatment options for socket discharge and infection in patients enucleated for retinoblastoma (Rb). A questionnaire was filled out by (parents of) ocular prosthesis-wearing patients with a history of enucleation as treatment for Rb. We collected data on patients' characteristics, cleaning habits of the prosthesis, frequency of socket irritation, discharge, and infection, and use of antibiotics. With ordinal logistic regression analysis, factors related to the outcome parameters (frequency of irritation, mucoid and purulent discharge) were identified. In a subset of young asymptomatic and symptomatic patients, a swab culture of the socket was performed to determine the presence of microorganisms. A total of 186 patients or their parents (mean age of the patients: 17.3 years, ranging from 0.8 to 88.3 years) filled out the questionnaire. Irritation, mucoid discharge, and purulent discharge were frequently (once a month or more often) experienced in 75 (39.5%), 127 (66.8%), and 15 (13.2%) sockets, respectively. Younger age was associated with a higher frequency of mucoid and purulent discharge. Radiation therapy, chemotherapy, gender, age at surgery, cleaning frequency, and nocturnal wear were not associated with the outcome parameters. In a subgroup of 26 patients, the sockets were swabbed and cultured. All symptomatic patients had a positive bacterial culture versus 15% (2/13) of the asymptomatic patients ( P socket infection. These complaints were found to decrease with increasing age, but did not seem to be influenced by cleaning or wearing habits. Symptomatic sockets, with and without discharge, were correlated with the presence of pathogenic bacteria for which local antibiotic treatment seemed effective in most cases.

  14. Hepatoprotective activity of methanolic extract of Barleria montana leaves in ethanol treated rats

    Directory of Open Access Journals (Sweden)

    Shanaz Banu

    2012-10-01

    Full Text Available Objective: The present study was undertaken to investigate the protective effect and possible mechanism of methanolic extract of Barleria montana (BM on ethanol-induced rat hepatic injury. Method: This respective activity was assessed through monitoring liver function tests through the measurement of triglycerides, cholesterol, total protein, total bilirubin, serum enzymes like SGOT and SGPT and in vivo antioxidant parameters like lipid peroxidase, Superoxide dismutase(SOD and catalase,. Further, hepatic tissues were also subjected to histopathological studies. Result: Pretreatment of BM methanolic extract (500mg/kg reduced the fatty liver symptoms and significantly (p<0.001 inhibited the increase of respective serum enzyme levels. Conclusions: The results of the present study indicated that BM methanolic extract possess hepatoprotective effects which could act as an effective treatment for acute hepatic diseases.

  15. Banana peel extract suppressed prostate gland enlargement in testosterone-treated mice.

    Science.gov (United States)

    Akamine, Kiichiro; Koyama, Tomoyuki; Yazawa, Kazunaga

    2009-09-01

    A methanol extract of banana peel (BPEx, 200 mg/kg, p.o.) significantly suppressed the regrowth of ventral prostates and seminal vesicles induced by testosterone in castrated mice. Further studies in the androgen-responsive LNCaP human prostate cancer cell line showed that BPEx inhibited dose-dependently testosterone-induced cell growth, while the inhibitory activities of BPEx did not appear against dehydrotestosterone-induced cell growth. These results indicate that methanol extract of banana peel can inhibit 5alpha-reductase and might be useful in the treatment of benign prostate hyperplasia.

  16. Sutherlandia frutescens (Fabaceae extracts used for treating tuberculosis do not have high activity against Mycobacterium smegmatis

    Directory of Open Access Journals (Sweden)

    Itumeleng H. Mabusa

    2017-12-01

    Full Text Available Sutherlandia frutescens (L R. Br. contains several essential, bioactive compounds with clinically proven pharmacological activities. Sutherlandia is prescribed for people with tuberculosis but it is still not known what compounds in this plant act against Mycobacterium tuberculosis and its mode of action. This study is aimed at determining if S. frutescens extracts contain antimycobacterial compounds. Aerial parts of S. frutescens were dried, ground and extracted with ethanol, dichloromethane: methanol 1:1 (v/v and water. The chemical profiling was done using high-performance liquid chromatography-mass spectroscopy (HPLC-MS and thin layer chromatography (TLC. TLC plates were developed in butanol:acetic acid:water (BAW to the ratio of 21:6:3; chloroform:methanol:water:formic acid (CMWF1 [60:15:2:1] and (CMWF2 [21:9:1:0.3]. Qualitative antioxidant activity was done, using 2.2-diphenylpacryl-1-hydrazyl (DPPH. Antimycobacterial activity of the plant extracts was evaluated, using micro-dilution and bioautographic methods against Mycobacterium smegmatis. Low antimycobacterial activity against M. smegmatis was observed on the bioautograms. The ethanol extracts contained more compounds compared to water extracts on HPLC-MS chromatographic profiles. The average Minimum Inhibitory Concentration (MIC values for all the extracts were 0.61 mg/mL units and the DCM:MeOH (1:1 extract had the lowest MIC value of 0.28 mg/mL. The results showed that the plant could be further explored for possible antimycobacterial agents. Low activity was observed, possibly due to low replication of bacilli and non-replicating organisms. The study provides preliminary scientific validation of the traditional medicinal use of this plant. Further studies are required to identify the bioactive compounds in the DCM:MeOH 1:1 extract which showed significant antimycobacterial activities.   Research correlation: This article is the original version, of which an Afrikaans

  17. Characteristic of New Solid-Phase Extraction Sorbent: Activated Carbon Prepared from Rice Husks under Base Treated Condition

    Directory of Open Access Journals (Sweden)

    Afrida Kurnia Putri

    2012-10-01

    Full Text Available A characterization of activated carbon (ACs prepared from rice husks (RHs under base treated condition as a new sorbent for solid-phase extraction (SPE to extract 4-nonylphenol isomers (4-NPs in water samples has been done. The ACs prepared from RHs usually exhibits low specific surface area due to its high ash content, but in case of its application for SPE, there are other factors need to be considered, such as the existence of functional groups inside the sorbent, that can enhance interaction of non-polar sorbent with analyte in the water matrices. In this case, silanol groups from ash content may affect the extraction efficiency for 4-NPs. The ACs made from RHs were chemically impregnated with ZnCl2 and carbonized at 800oC. To investigate the role of silica, three types of ACs were prepared, i.e., untreated ACs (AC–Si, contain silica, base treated ACs (AC–B–Si, remain some silica inside, and ACs made by base treated RHs (AC–B, no silica, the surface area obtained from these treatments were 1352 m2/g, 1666 m2/g, and 1712m2/g respectively.  ACs made by base treatment has the highest surface area (related to BET, which indicat that silica removal process promotes the formation of open pore system on ACs and enhances the surface area of ACs. However, extraction efficiency measured by GC-MS in SPE process showed the reversal trends (i.e., AC–Si= 32.08%, AC–B–Si= 82.63%, AC–B=51.78%, among them the AC–B–Si sorbent reveal the best performance in SPE process. It is indicated that although silica usually exhibits low specific surface area, but control presence of silica as a polar functional group has a positive influence in the interaction between non-polar sorbent and 4-NPs.

  18. Cytokine profile and natural killer cell activity in Listeria monocytogenes infected mice treated orally with Petiveria alliacea extract.

    Science.gov (United States)

    Queiroz, M L; Quadros, M R; Santos, L M

    2000-08-01

    In this work, we investigated the effects of Petiveria alliacea extract on the production of Th1-type and Th2-type cytokines and on NK cells activity in normal and Listeria monocytogenes infected mice. Our results demonstrated that in normal/non-infected mice P. alliacea administration led to increased levels of Interleukin-2 (IL-2). The infection alone enhanced INF-gamma levels and NK cell activity at 48 and 72 hours of infection. The treatment with five consecutive doses of 1000 mg/kg/day of P. alliacea extract, given previously to infection, led to further increases in IL-2 levels, in relation to normal/non-infected/P. alliacea treated controls, and in INF-gamma levels at 72 h of infection, compared to infected mice. On the other hand, the production of IL-4 and IL-10 were not altered either by the infection or by the treatment with P. alliacea extract. NK cells activity increased at 48 h and 72 h following the inoculation of the bacteria. When mice were treated with P. alliacea previously to infection, NK activity was higher than that observed at 48 h, 72 h and 120 h of infection in the infected animal. Based on these findings we suggest that P. alliacea up-regulates anti-bacterial immune response by enhancing both Th1 function and the activity of NK cells.

  19. Stability of implants placed in fresh sockets versus healed alveolar sites: Early findings.

    Science.gov (United States)

    Gehrke, Sergio Alexandre; da Silva Neto, Ulisses Tavares; Rossetti, Paulo Henrique Orlato; Watinaga, Sidney Eiji; Giro, Gabriela; Shibli, Jamil Awad

    2016-05-01

    The present study measured implant stability quotient (ISQ) values at three different time points after surgical procedures to compare whether the stability values differed between implants placed in fresh extraction sockets versus healed alveolar sites. To measure implant stability, resonance frequency analysis (RFA) was performed in 77 patients (53 women, 24 men) with a total of 120 dental implants. These implants were divided into two groups: Group 1 included 60 implants in healed alveolar sites (22 in the maxilla, 38 in the mandible), and Group 2 included 60 implants in fresh sockets (41 in the maxilla, 19 in the mandible). Implant stability was measured immediately at implant placement (baseline), 90, and 150 days later. Statistical analysis was made using a multivariate regression linear model at implant level (α = 0.05). Overall, the means and standard deviations of the ISQ values were 62.7 ± 7.14 (95% confidence interval [CI], 39-88) at baseline, 70.0 ± 6.22 (95% CI, 46-88) at 90 days, and 73.4 ± 5.84 (95% CI, 58-88) at 150 days. In Group 1, the ISQs ranged between 64.3 ± 6.20 and 75.0 ± 5.69, while in Group 2, presented lower values that ranged between 61.2 ± 8.09 and 71.9 ± 5.99 (P = 0.002). Anatomic location and times periods were the only identified variables with an influence on ISQ values at implant level (P sockets and in healed sites exhibited similar evolutions in ISQ values and thus osseointegration; however, the implants in the healed alveolar sites exhibited superior values at all time points. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. A Mangifera indica L. extract could be used to treat neuropathic pain and implication of mangiferin.

    Science.gov (United States)

    Garrido-Suárez, Bárbara B; Garrido, Gabino; Delgado, Rene; Bosch, Fe; del C Rabí, María

    2010-12-09

    It has been accepted that neuroinflammation, oxidative stress and glial activation are involved in the central sensitization underlying neuropathic pain. Vimang is an aqueous extract of Mangifera indica L. traditionally used in Cuba for its analgesic, anti-inflammatory, antioxidant and immunomodulatory properties. Several formulations are available, and also for mangiferin, its major component. Preclinical studies demonstrated that these products prevented tumor necrosis factor α -induced IκB degradation and the binding of nuclear factor κB to DNA, which induces the transcription of genes implicated in the expression of some mediators and enzymes involved in inflammation, pain, oxidative stress and synaptic plasticity. In this paper we propose its potential utility in the neuropathic pain treatment. This hypothesis is supported in the cumulus of preclinical and clinical evidence around the extract and mangiferin, its major component, and speculates about the possible mechanism of action according to recent advances in the physiopathology of neuropathic pain.

  1. A Mangifera indica L. Extract Could Be Used to Treat Neuropathic Pain and Implication of Mangiferin

    Directory of Open Access Journals (Sweden)

    María del C. Rabí

    2010-12-01

    Full Text Available It has been accepted that neuroinflammation, oxidative stress and glial activation are involved in the central sensitization underlying neuropathic pain. Vimang is an aqueous extract of Mangifera indica L. traditionally used in Cuba for its analgesic, anti-inflammatory, antioxidant and immunomodulatory properties. Several formulations are available, and also for mangiferin, its major component. Preclinical studies demonstrated that these products prevented tumor necrosis factor α -induced IκB degradation and the binding of nuclear factor κB to DNA, which induces the transcription of genes implicated in the expression of some mediators and enzymes involved in inflammation, pain, oxidative stress and synaptic plasticity. In this paper we propose its potential utility in the neuropathic pain treatment. This hypothesis is supported in the cumulus of preclinical and clinical evidence around the extract and mangiferin, its major component, and speculates about the possible mechanism of action according to recent advances in the physiopathology of neuropathic pain.

  2. Estrogen hormone level of prepubertal female rat treated with Calliandra calothyrsus ethanolic leaf extract

    Science.gov (United States)

    Setyawati, I.; Wiratmini, N. I.; Narayani, I.

    2018-03-01

    This research examined the phytoestrogen potential of Calliandra calothyrsus leaf extract in prepubertal female rat (Rattus norvegicus). Sixty weaned female rats (21 days old) were divided into five groups i.e. control (K), negative control which was given 0.5% Na CMC suspension (KN) and treatment groups which were given with C. calothyrsus ethanolic leaf extract doses 25 mg/kg bw (P1), 50 mg/kg bw (P2) and 75 mg/kg bw (P3). The treatment suspension was administered 0.5 mL/rat/day by gavage for 28 days, started at the age of 21st days old. The rats were sacrificed and the blood samples were collected from 4 rats / group at the age of 28th, 42nd and 56th days old, each. The concentration of estrogen hormone levels were measured from blood serum by ELISA kit and were read at 450 nm wavelength with an ELISA Spectrophotometer. Data was analyzed statistically by General Linear Model with 95% of confidence. The result showed that rat’s body weight decreased significantly with the higher doses and the longer the treatment of C. calothyrsus leaf extract due to the anti-nutritive activity of calliandra tannins. The estrogen hormone level was significantly increased at the highest dose. The highest estrogen levels were found in the group of female rats which were given the exctract of 75 mg/kg bw until the age of 42nd days. This results showed that there was a phytoestrogen potential in the C. calothyrsus leaf extract.

  3. Anti-Inflammatory Activity of Citric Acid-Treated Wheat Germ Extract in Lipopolysaccharide-Stimulated Macrophages.

    Science.gov (United States)

    Jeong, Hee-Yeong; Choi, Yong-Seok; Lee, Jae-Kang; Lee, Beom-Joon; Kim, Woo-Ki; Kang, Hee

    2017-07-10

    Until recently, fermentation was the only processing used to improve the functionality of wheat germ. The release of 2,6-dimethoxy-1,4-benzoquinone (DMBQ) from hydroquinone glycosides during the fermentation process is considered a marker of quality control. Here, we treated wheat germ extract with citric acid (CWG) to release DMBQ and examined the anti-inflammatory activity of this extract using a lipopolysaccharide-activated macrophage model. Treatment of wheat germ with citric acid resulted in detectable release of DMBQ but reduced total phenolic and total flavonoid contents compared with untreated wheat germ extract (UWG). CWG inhibited secretion of the pro-inflammatory cytokines tumor necrosis factor-α, interleukin (IL)-6, and IL-12 and the synthesis of cyclooxygenase-2, while UWG only decreased IL-12 production. CWG and UWG induced high levels of anti-inflammatory IL-10 and heme oxygenase-1. CWG specifically inhibited phosphorylation of NF-κB p65 and p38 kinase at 15 min after LPS stimulation. Our study showed that citric acid treatment enhanced the anti-inflammatory activity of wheat germ extract.

  4. Characterization of halogenated DBPs and identification of new DBPs trihalomethanols in chlorine dioxide treated drinking water with multiple extractions.

    Science.gov (United States)

    Han, Jiarui; Zhang, Xiangru; Liu, Jiaqi; Zhu, Xiaohu; Gong, Tingting

    2017-08-01

    Chlorine dioxide (ClO 2 ) is a widely used alternative disinfectant due to its high biocidal efficiency and low-level formation of trihalomethanes and haloacetic acids. A major portion of total organic halogen (TOX), a collective parameter for all halogenated DBPs, formed in ClO 2 -treated drinking water is still unknown. A commonly used pretreatment method for analyzing halogenated DBPs in drinking water is one-time liquid-liquid extraction (LLE), which may lead to a substantial loss of DBPs prior to analysis. In this study, characterization and identification of polar halogenated DBPs in a ClO 2 -treated drinking water sample were conducted by pretreating the sample with multiple extractions. Compared to one-time LLE, the combined four-time LLEs improved the recovery of TOX by 2.3 times. The developmental toxicity of the drinking water sample pretreated with the combined four-time LLEs was 1.67 times higher than that pretreated with one-time LLE. With the aid of ultra-performance liquid chromatography/electrospray ionization-triple quadrupole mass spectrometry, a new group of polar halogenated DBPs, trihalomethanols, were detected in the drinking water sample pretreated with multiple extractions; two of them, trichloromethanol and bromodichloromethanol, were identified with synthesized standard compounds. Moreover, these trihalomethanols were found to be the transformation products of trihalomethanes formed during ClO 2 disinfection. The results indicate that multiple LLEs can significantly improve extraction efficiencies of polar halogenated DBPs and is a better pretreatment method for characterizing and identifying new polar halogenated DBPs in drinking water. Copyright © 2017. Published by Elsevier B.V.

  5. Elemental analysis of ash residue from combustion of CCA treated wood waste before and after electrodialytic extraction

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Ottosen, Lisbeth M.

    2006-01-01

    Element distribution in a combined fly ash and bottom ash from combustion of copper chromate arsenate (CCA) treated wood waste was investigated by scanning electron microscopy (SEM/EDX) before and after electrodialytic extraction. The untreated ash contained various particles, including pieces...... of incompletely combusted wood rich in Cr and Ca, and irregular particles rich in Si, Al and K. Cr was also found incorporated in silica-based matrix particles. As was associated with Ca in porous (char) particles, indicating that Ca-arsenates had been formed during combustion. Cu was associated with Cr...... in the incompletely combusted wood pieces and was also found in almost pure form in a surface layer of some matrix particles – indicating surface condensation of volatile Cu species. In treated ash, Ca and As were no longer found together, indicating that Ca-arsenates had been dissolved due to the electrodialytic...

  6. Immediate Loading of Tapered Implants Placed in Postextraction Sockets and Healed Sites.

    Science.gov (United States)

    Han, Chang-Hun; Mangano, Francesco; Mortellaro, Carmen; Park, Kwang-Bum

    2016-07-01

    The aim of the present study was to compare the survival, stability, and complications of immediately loaded implants placed in postextraction sockets and healed sites. Over a 2-year period, all patients presenting with partial or complete edentulism of the maxilla and/or mandible (healed site group, at least 4 months of healing after tooth extraction) or in need of replacement of nonrecoverable failing teeth (postextraction group) were considered for inclusion in this study. Tapered implants featuring a nanostructured calcium-incorporated surface were placed and loaded immediately. The prosthetic restorations comprised single crowns, fixed partial dentures, and fixed full arches. Primary outcomes were implant survival, stability, and complications. Implant stability was assessed at placement and at each follow-up evaluation (1 week, 3 months, and 1 year after placement): implants with an insertion torque (IT) sockets of 17 patients, and 32 implants were placed in healed sites of 22 patients. There were no statistically significant differences in ISQ values between the 2 groups, at each assessment. In total, 60 implants (96.8%) had an IT ≥45 and an ISQ ≥70 at placement and at each follow-up control: all these implants were successfully loaded. Only 2 implants (1 in a postextraction socket and 1 in a healed site, 3.2%) could not achieve an IT ≥45 N·cm and/or an ISQ ≥70 at placement or over time: accordingly, these were considered failed for stability, as they could not be subjected to immediate loading. One of these 2 implants, in a healed site of a posterior maxilla, had to be removed, yielding an overall 1-year implant survival rate of 98.4%. No complications were reported. No significant differences were reported between the 2 groups with respect to implant failures and complications. Immediately loaded implants placed in postextraction sockets and healed sites had similar high survival and stability, with no reported complications. Further long

  7. Plug the socket of the main closing valve in a nuclear power plant

    International Nuclear Information System (INIS)

    Neupauer, J.; Bednar, B.

    1988-01-01

    The plug is designed for closing the main closing valve socket during a refuelling shutdown of a nuclear power plant. The plug is fixed in the using jaws forced against the socket ring part. The socket is sealed by expanding a ring between two cone trays. A valve provided in the plug allows draining the pipe. The plug is inserted in the socket using a jib suspended on a rail. Following sealing both sockets the inner surfaces of the closing valve can be decontaminated. Following decontamination, a water-proof cover is slid over the plug protecting the plug moving mechanism from damage. (J.B.). 1 fig

  8. Decrease in spermatic parameters of mice treated with hydroalcoholic extract Tropaeolum tuberosum “mashua”

    Directory of Open Access Journals (Sweden)

    Jonathan H. Vásquez

    2012-10-01

    Full Text Available In this work, we provided a Tropaeolum tuberosum hydroalcoholic extract to male mice (780 mg kg-1 for 7, 14 and 21 days treatment, there was no significant difference in body weight gain, testes, epididymides and prostate weight (p> 0.05, nevertheless progressive motility decreased and immobile sperm count increased significantly after 21 days treatment (p <0.05. The sperm count in the epididymis cauda decreased in the 3 three assessments, concentration on 21 days treatment was significantly lower than those of 7 and 14 days treatments (p <0.05. Our results suggest, that T. tuberosum has a direct action on the male reproductive system decreasing spermatic parameters without exerting toxic effects on mice.

  9. Class I malocclusion with severe double rotrusion treated with first premolars extraction

    Directory of Open Access Journals (Sweden)

    Ricardo Moresca

    2014-06-01

    Full Text Available Angle Class I malocclusion with bimaxillary protrusion is characterized by severe buccal tipping of incisors, which causes upper and lower lip protrusion. First premolars extraction is recommended to reduce facial convexity as a result of anterior teeth retraction, which keeps canines and first molars in key to occlusion. In order to yield orthodontic results that are compatible with ideal esthetic and cephalometric outcomes, the space closure phase needs to be carried out with overbite and incisors torque control. The majority of cases also requires maximum anchorage of posterior teeth. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as a requirement for the title of certified by the BBO.

  10. Class I malocclusion with severe double rotrusion treated with first premolars extraction*

    Science.gov (United States)

    Moresca, Ricardo

    2014-01-01

    Angle Class I malocclusion with bimaxillary protrusion is characterized by severe buccal tipping of incisors, which causes upper and lower lip protrusion. First premolars extraction is recommended to reduce facial convexity as a result of anterior teeth retraction, which keeps canines and first molars in key to occlusion. In order to yield orthodontic results that are compatible with ideal esthetic and cephalometric outcomes, the space closure phase needs to be carried out with overbite and incisors torque control. The majority of cases also requires maximum anchorage of posterior teeth. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO) as a requirement for the title of certified by the BBO. PMID:25162577

  11. Development programme update for a socket solution offering a highly efficient termination of polyester mooring tethers

    International Nuclear Information System (INIS)

    Firth, Kevin M.; Calverley, Steve; Quintas, Manuel Pedro

    2000-01-01

    Bridon have previously developed a patented 'Socket and Spike' design for polyester tethers comprising a parallel array of seven sub-ropes. This phase of the development was successfully completed, subsequently Bridon have embarked on a new phase which aims to increase the efficiency of the socket and address the assembly problems that have been identified. The development has continued with the 'Socket and Spike' principle but a unique termination method has been devised such that each sub-rope is terminated in it is own mini-socket and pre-loaded prior to fitting into the main socket ensuring zero slippage and equal transfer of the mooring load. The sub-ropes are nested into the main socket body resulting in a socket termination that lighter, more efficient and easier to handle than the current method of spliced eye incorporating a steel spool and shackle. (author)

  12. Discharge and infection in retinoblastoma post-enucleation sockets

    NARCIS (Netherlands)

    Mourits, Daphne L.; Hartong, Dyonne T.; Budding, Andries E.; Bosscha, Machteld I.; Tan, H. Stevie; Moll, Annette C.

    2017-01-01

    To investigate the causes and treatment options for socket discharge and infection in patients enucleated for retinoblastoma (Rb). A questionnaire was filled out by (parents of) ocular prosthesis-wearing patients with a history of enucleation as treatment for Rb. We collected data on patients'

  13. Recycling Waste Electrical Socket as a Carbon Resource in ...

    African Journals Online (AJOL)

    Michael

    GMJ Vol. 16, No. 1, June, 2016. Recycling Waste Electrical Socket as a Carbon ... Carbon Resource in Ironmaking”, Ghana Mining Journal, Vol. 16, No. ... 2013; Dankwah and Koshy, 2014; Dankwah et al., ..... Chemical Science and Engineering, UNSW, ... of Scientific and Technology Research (IJSTR),. Vol. 4, Issue 2, pp.

  14. Effect of Modifying Prosthetic Socket Base Materials by Adding Nanodiamonds

    Directory of Open Access Journals (Sweden)

    Lifang Ma

    2015-01-01

    Full Text Available The curing process of prosthetic socket base materials requires attention owing to a series of associated problems that are yet to be addressed and solved. However, to date, few relevant studies have been reported. In this paper, nanodiamonds modified with a silane coupling agent were dispersed into a prosthetic socket base material, and the performance of the modified base materials was investigated. Adding a predetermined amount of nanodiamonds to the prosthetic socket base material increased the glass transition temperature, improved the mechanical properties of the cured base material, and reduced the influence of the volatile gas formed during the curing process on the environment. With increasing nanodiamond contents, the glass transition temperature increased and the mechanical properties improved slightly. Owing to the high thermal conductivity of the nanodiamonds, the localized heat, as a result of the curing process, could be dissipated and released. Thus, adding nanodiamonds led to a more uniform temperature field forming in the curing system. This improved the curing process and reduced the formation of volatile monomers, thereby decreasing the adverse impact of the generated volatile gases on the environment. All of these provide a potential strategy for modifying prosthetic socket base materials.

  15. Prosthetics socket that incorporates an air splint system focusing on dynamic interface pressure.

    Science.gov (United States)

    Razak, Nasrul Anuar Abd; Osman, Noor Azuan Abu; Gholizadeh, Hossein; Ali, Sadeeq

    2014-08-01

    The interface pressure between the residual limb and prosthetic socket has a significant effect on an amputee's satisfaction and comfort. This paper presents the design and performance of a new prosthetic socket that uses an air splint system. The air splint prosthetic socket system was implemented by combining the air splint with a pressure sensor that the transhumeral user controls through the use of a microcontroller. The modular construction of the system developed allows the FSR pressure sensors that are placed inside the air splint socket to determine the required size and fitting for the socket used. Fifteen transhumeral amputees participated in the study. The subject's dynamic pressure on the socket that's applied while wearing the air splint systems was recorded using F-socket transducers and microcontroller analysis. The values collected by the F-socket sensor for the air splint prosthetic socket system were determined accordingly by comparing the dynamic pressure applied using statically socket. The pressure volume of the air splint fluctuated and was recorded at an average of 38 kPa (2.5) to 41 kPa (1.3) over three hours. The air splint socket might reduce the pressure within the interface of residual limb. This is particularly important during the daily life activities and may reduce the pain and discomfort at the residual limb in comparison to the static socket. The potential development of an auto-adjusted socket that uses an air splint system as the prosthetic socket will be of interest to researchers involved in rehabilitation engineering, prosthetics and orthotics.

  16. Discharge and infection in retinoblastoma post-enucleation sockets

    Directory of Open Access Journals (Sweden)

    Mourits DL

    2017-03-01

    Full Text Available Daphne L Mourits,1 Dyonne T Hartong,1 Andries E Budding,2 Machteld I Bosscha,1 H Stevie Tan,1 Annette C Moll1 1Department of Ophthalmology, VU University Medical Center, 2Department of Microbiology, Academic Medical Center, Amsterdam, the Netherlands Purpose: To investigate the causes and treatment options for socket discharge and infection in patients enucleated for retinoblastoma (Rb. Methods: A questionnaire was filled out by (parents of ocular prosthesis-wearing patients with a history of enucleation as treatment for Rb. We collected data on patients’ characteristics, cleaning habits of the prosthesis, frequency of socket irritation, discharge, and infection, and use of antibiotics. With ordinal logistic regression analysis, factors related to the outcome parameters (frequency of irritation, mucoid and purulent discharge were identified. In a subset of young asymptomatic and symptomatic patients, a swab culture of the socket was performed to determine the presence of microorganisms. Results: A total of 186 patients or their parents (mean age of the patients: 17.3 years, ranging from 0.8 to 88.3 years filled out the questionnaire. Irritation, mucoid discharge, and purulent discharge were frequently (once a month or more often experienced in 75 (39.5%, 127 (66.8%, and 15 (13.2% sockets, respectively. Younger age was associated with a higher frequency of mucoid and purulent discharge. Radiation therapy, chemotherapy, gender, age at surgery, cleaning frequency, and nocturnal wear were not associated with the outcome parameters. In a subgroup of 26 patients, the sockets were swabbed and cultured. All symptomatic patients had a positive bacterial culture versus 15% (2/13 of the asymptomatic patients (P<0.001. Common cold was correlated with both symptoms and presence of bacteria. Haemophilus influenzae and Staphylococcus aureus were the species most frequently cultured. Conclusion: Ocular prosthesis-wearing patients often experienced mucoid

  17. Aqueous extracts from asparagus stems prevent memory impairments in scopolamine-treated mice.

    Science.gov (United States)

    Sui, Zifang; Qi, Ce; Huang, Yunxiang; Ma, Shufeng; Wang, Xinguo; Le, Guowei; Sun, Jin

    2017-04-19

    Aqueous extracts from Asparagus officinalis L. stems (AEAS) are rich in polysaccharides, gamma-amino butyric acid (GABA), and steroidal saponin. This study was designed to investigate the effects of AEAS on learning, memory, and acetylcholinesterase-related activity in a scopolamine-induced model of amnesia. Sixty ICR mice were randomly divided into 6 groups (n = 10) including the control group (CT), scopolamine group (SC), donepezil group (DON), low, medium, and high dose groups of AEAS (LS, MS, HS; 1.6 mL kg -1 , 8 mL kg -1 , 16 mL kg -1 ). The results showed that 8 mL kg -1 of AEAS used in this study significantly reversed scopolamine-induced cognitive impairments in mice in the novel object recognition test (P < 0.05) and the Y-maze test (P < 0.05), and also improved the latency to escape in the Morris water maze test (P < 0.05). Moreover, it significantly increased acetylcholine and inhibited acetylcholinesterase activity in the hippocampus, which was directly related to the reduction in learning and memory impairments. It also reversed scopolamine-induced reduction in the hippocampal brain-derived neurotrophic factor (BDNF) and the cAMP response element-binding protein (CREB) mRNA expression. AEAS protected against scopolamine-induced memory deficits. In conclusion, AEAS protected learning and memory function in mice by enhancing the activity of the cholinergic nervous system, and increasing BDNF and CREB expression. This suggests that AEAS has the potential to prevent cognitive impairments in age-related diseases, such as Alzheimer's disease.

  18. Cerebral metabonomics study on Parkinson's disease mice treated with extract of Acanthopanax senticosus harms.

    Science.gov (United States)

    Li, Xu-zhao; Zhang, Shuai-nan; Lu, Fang; Liu, Chang-feng; Wang, Yu; Bai, Yu; Wang, Na; Liu, Shu-min

    2013-10-15

    Extract of Acanthopanax senticosus harms (EAS) has neuroprotective effect on Parkinson's disease (PD) mice against dopaminergic neuronal damage. However, studies of its anti-PD mechanism are challenging, owing to the complex pathophysiology of PD, and complexity of EAS with multiple constituents acting on different metabolic pathways. Here, we have investigated the metabolic profiles and potential biomarkers in a mice model of MPTP-induced PD after treatment of EAS. Metabonomics based on ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS) was used to profile the metabolic fingerprints of mesencephalon obtained from 1-Methyl-4-phenyl-1, 2, 3, 6-tetrahydropyridine Hydrochloride (MPTP-HCl)-induced PD mice model with and without EAS treatment. Through partial least squares-discriminate analysis (PLS-DA), it was observed that metabolic perturbations induced by MPTP were restored after treatment with EAS. Metabolites with significant changes induced by MPTP, including L-dopa, 5'-methylthioadenosine, tetradecanoylcarnitine, phytosphingosine-1-P, Cer(d18:0/18:0), LysoPC(20:4(5Z,8Z,11Z,14Z)), L-palmitoyl -carnitine, tetracosanoylglycine, morphiceptin and stearoylcarnitine, were characterized as potential biomarkers involved in the pathogenesis of PD. The derivations of all those biomarkers can be regulated by EAS treatment except Cer(d18:0/18:0), LysoPC(20:4(5Z,8Z,11Z,14Z)), morphiceptin. The therapeutic effect of EAS on PD may involve in regulating the tyrosine metabolism, mitochondrial beta-oxidation of long chain saturated fatty acids, fatty acid metabolism, methionine metabolism, and sphingolipid metabolism. This study indicated that changed metabolites can be certainly recovered by EAS, and the treatment of EAS can be connected with the regulation of related metabolic pathways. Copyright © 2013 Elsevier GmbH. All rights reserved.

  19. Healing of Postextraction Sockets Preserved With Autologous Platelet Concentrates. A Systematic Review and Meta-Analysis.

    Science.gov (United States)

    Del Fabbro, Massimo; Bucchi, Cristina; Lolato, Alessandra; Corbella, Stefano; Testori, Tiziano; Taschieri, Silvio

    2017-08-01

    The true benefit of autologous platelet concentrates (APCs) for enhancing the healing of postextraction sites is still a matter of debate, and in recent years several clinical trials have addressed this issue. The purpose of this study was to determine the effectiveness of an APC adjunct in the preservation of fresh extraction sockets. An electronic search was performed on Medline, Embase, Scopus, and the Cochrane Central Register of Controlled Trials. Only controlled clinical trials or randomized clinical trials were included. Selected articles underwent risk-of-bias assessment. The outcomes were complications and adverse events, discomfort and quality of life, bone healing and remodeling assessed by histologic and radiographic techniques, and soft tissue healing. Thirty-three comparative studies were included. Nine articles had a parallel design and 24 had a split-mouth design. Twenty studies were considered to have a low risk of bias and 13 were considered to have a high risk. Overall, 1,193 teeth were extracted from 911 patients. Meta-analysis showed that soft tissue healing, probing depth at 3 months, and bone density at 1, 3, and 6 months were statistically better for the APC group. Qualitative analysis suggested that APCs might be associated with a decrease in swelling and trismus. However, no relevant difference among groups was found for probing depth at 1 month, incidence of alveolar osteitis, acute inflammation or infection, percentage of new bone, and indirect measurement of bone metabolism. APCs should be used in postextraction sites to improve clinical and radiographic outcomes such as bone density and soft tissue healing and postoperative symptoms. The actual benefit of APCs on decreasing pain in extraction sockets is still not quantifiable. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  20. NMR-based plasma metabolomic discrimination for male fertility assessment of rats treated with Eurycoma longifolia extracts.

    Science.gov (United States)

    Ebrahimi, Forough; Ibrahim, Baharudin; Teh, Chin-Hoe; Murugaiyah, Vikneswaran; Chan, Kit-Lam

    2017-06-01

    Male infertility is one of the leading causes of infertility which affects many couples worldwide. Semen analysis is a routine examination of male fertility status which is usually performed on semen samples obtained through masturbation that may be inconvenient to patients. Eurycoma longifolia (Tongkat Ali, TA), native to Malaysia, has been traditionally used as a remedy to boost male fertility. In our recent studies in rats, upon the administration of high-quassinoid content extracts of TA including TA water (TAW), quassinoid-rich TA (TAQR) extracts, and a low-quassinoid content extract including quassinoid-poor TA (TAQP) extract, sperm count (SC) increased in TAW- and TAQR-treated rats when compared to the TAQP-treated and control groups. Consequently, the rats were divided into normal- (control and TAQP-treated) and high- (TAW- and TAQR-treated) SC groups [Ebrahimi et al. 2016]. Post-treatment rat plasma was collected. An optimized plasma sample preparation method was developed with respect to the internal standards sodium 3- (trimethylsilyl) propionate- 2,2,3,3- d4 (TSP) and deuterated 4-dimethyl-4-silapentane-1-ammonium trifluoroacetate (DSA). Carr-Purcell-Meibum-Gill (CPMG) experiments combined with orthogonal partial least squares discriminant analysis (OPLS-DA) was employed to evaluate plasma metabolomic changes in normal- and high-SC rats. The potential biomarkers associated with SC increase were investigated to assess fertility by capturing the metabolomic profile of plasma. DSA was selected as the optimized internal standard for plasma analysis due to its significantly smaller half-height line width (W h/2 ) compared to that of TSP. The validated OPLS-DA model clearly discriminated the CPMG profiles in regard to the SC level. Plasma profiles of the high-SC group contained higher levels of alanine, lactate, and histidine, while ethanol concentration was significantly higher in the normal-SC group. This approach might be a new alternative applicable to

  1. Increased blastocyst formation of cloned porcine embryos produced with donor cells pre-treated with Xenopus egg extract and/or digitonin

    DEFF Research Database (Denmark)

    Liu, Ying; Østrup, Olga; Li, Juan

    2012-01-01

    from Xenopus laevis eggs. In Experiment 1, fetal fibroblasts were permeabilized by digitonin, incubated in egg extract and, after re-sealing of cell membranes, cultured for 3 or 5 days before use as donor cells in handmade cloning (HMC). Controls were produced by HMC with non-treated donor cells....... The blastocyst rate for reconstructed embryos increased significantly when digitonin-permeabilized, extract-treated cells were used after 5 days of culture after re-sealing. In Experiment 2, fetal and adult fibroblasts were treated with digitonin alone before re-sealing the cell membranes, then cultured for 3...... cells after pre-treatment with permeabilization/re-sealing and Xenopus egg extract. Interestingly, we observe a similar increase in cloning efficiency by permeabilization/re-sealing of donor cells without extract treatment that seems to depend on choice of donor cell type. Thus, pre-treatment of donor...

  2. Histophatologic changes of lung in asthmatic male rats treated with hydro-alcoholic extract of plantago major and theophylline

    Directory of Open Access Journals (Sweden)

    Farah Farokhi

    2013-04-01

    Full Text Available Objective: Plantago major (P. major is one of the medicinal crops in the world which has therapeutic properties for treatment of respiratory and gastrointestinal diseases. Theophylline is commonly used for the treatment of respiratory diseases. In this study, we investigated the protective effects of hydro-alcoholic extract of P. majoron lung in asthmatic male rats. Materials and Methods: 32 male adult rats were randomly divided into 4 groups: The control group (C received normal saline; Asthma (A group received a normal diet; Asthma group treated with Theophylline (200 mg/kg b.w. (T; Asthma group which received p.major (100 mg/kg b.w. (P. Asthma was induced by citric acid, 0.1 mg in form of spraying. The injection of P.major extract and theophylline was administered intraperitoneally for four weeks. At the end of the treatment, all of the rats were sacrificed and lungs were taken out, fixed, and stained with H&E, toluidine blue, and PAS, then histological studies were followed with light microscope. Results: Results showed that, in asthmatic group, the mean number of mast cells was significantly increased (p

  3. Effects of the hydroethanolic extract of Mucuna pruriens (L.) DC (Fabaceae) on haematological profile in normal and haloperidol treated rats.

    Science.gov (United States)

    Akindele, Abidemi J; Busayo, Fadeyibi I

    2011-01-01

    Mucuna pruriens (L.) DC (Fabaceae) is a climbing plant claimed in traditional medicine to possess anti-anaemic effect. The study is to investigate the effects of the hydroethanolic extract of M. pruriens (MP) on haematological profile in normal and haloperidol treated rats. MP was administered p.o. at doses of 50, 100, 200, and 400 mg/kg to groups of rats daily for 28 days. Control animals received distilled water. Rats were sacrificed on the 28th day and blood samples collected for evaluation of haematological parameters and serum iron. Another set of animals received MP p.o. at same doses but along with haloperidol (0.2 mg/kg, i.p.) daily for 4 days. Three other groups of rats received distilled water, haloperidol, and MP at 400 mg/kg alone. Haematological parameters and serum iron were determined. Extract iron content, phytochemical analysis and acute toxicity studies were also carried out. MP administered to normal rats for 28 days significantly (p Mucuna pruriens possibly possess beneficial effects in anaemic conditions especially associated with iron deficiency.

  4. Enzyme-treated Asparagus officinalis extract shows neuroprotective effects and attenuates cognitive impairment in senescence-accelerated mice.

    Science.gov (United States)

    Sakurai, Takuya; Ito, Tomohiro; Wakame, Koji; Kitadate, Kentaro; Arai, Takashi; Ogasawara, Junetsu; Kizaki, Takako; Sato, Shogo; Ishibashi, Yoshinaga; Fujiwara, Tomonori; Akagawa, Kimio; Ishida, Hitoshi; Ohno, Hideki

    2014-01-01

    Increases in the number of patients with dementia involving Alzheimer's disease (AD) are seen as a grave public health problem. In neurodegenerative disorders involving AD, biological stresses, such as oxidative and inflammatory stress, induce neural cell damage. Asparagus (Asparagus officinalis) is a popular vegetable, and an extract prepared from this reportedly possesses various beneficial biological activities. In the present study, we investigated the effects of enzyme-treated asparagus extract (ETAS) on neuronal cells and early cognitive impairment of senescence-accelerated mouse prone 8 (SAMP8) mice. The expression of mRNAs for factors that exert cytoprotective and anti-apoptotic functions, such as heat-shock protein 70 and heme oxygenase-1, was upregulated in NG108-15 neuronal cells by treatment with ETAS. Moreover, when release of lactate dehydrogenase from damaged NG108-15 cells was increased for cells cultured in medium containing either the nitric oxide donor sodium nitroprusside or the hypoxia mimic reagent cobalt chloride, ETAS significantly attenuated this cell damage. Also, when contextual fear memory, which is considered to be a hippocampus-dependent memory, was significantly impaired in SAMP8 mice, ETAS attenuated the cognitive impairment. These results suggest that ETAS produces cytoprotective effects in neuronal cells and attenuates the effects on the cognitive impairment of SAMP8 mice.

  5. Histophatologic changes of lung in asthmatic male rats treated with hydro-alcoholic extract of Plantago major and theophylline

    Directory of Open Access Journals (Sweden)

    Farah Farokhi

    2013-03-01

    Full Text Available Objective: Plantago major (P. major is one of the medicinal crops in the world which has therapeutic properties for treatment of respiratory and gastrointestinal diseases. Theophylline is commonly used for the treatment of respiratory diseases. In this study, we investigated the protective effects of hydro-alcoholic extract of P. major on lung in asthmatic male rats. Materials and Methods: 32 male adult rats were randomly divided into 4 groups: The control group (C received normal saline; Asthma (A group received a normal diet; Asthma group treated with Theophylline (200 mg/kg b.w. (T; Asthma group which received p.major (100 mg/kg b.w. (P. Asthma was induced by citric acid, 0.1 mg in form of spraying. The injection of P.major extract and theophylline was administered intraperitoneally for four weeks. At the end of the treatment, all of the rats were sacrificed and lungs were taken out, fixed, and stained with H&E, toluidine blue, and PAS, then histological studies were followed with light microscope. Results: Results showed that, in asthmatic group, the mean number of mast cells was significantly increased (p<0.05. Thickness of alveolar epithelium and accumulation of glycoprotein in airways was increased. Moreover, in some of alveolar sac hemorrhaging was observed. Administration of p.major extract in asthmatic rats restored these changes towards normal group.Conclusion: The present study revealed that P. major compared with theophylline, has a protective effect on lung in asthmatic rats.

  6. Immediate implant placement and provisional crown fabrication after a minimally invasive extraction of a peg-shaped maxillary lateral incisor: a clinical report.

    Science.gov (United States)

    Turkyilmaz, Ilser; Suarez, Jose Carlos; Company, Andrea M

    2009-09-01

    The aim of this case report is to describe the replacement of a maxillary peg-shaped lateral incisor with the placement of an immediate implant and a provisional restoration following a minimally invasive extraction to preserve anterior esthetics. Extraction sites in the anterior maxilla can present restorative challenges with regard to esthetics. Resistance to wearing a temporary removable partial denture during healing makes immediate implant therapy an appealing alternative to patients. Implant placement into fresh extraction sockets using no flap elevation has recently become more popular due to some advantages including less bleeding, swelling, and the preservation of existing soft tissue contours. A 20-year-old woman with a peg-shaped maxillary left lateral incisor was treated using an implant placed into the fresh extraction socket using a flapless approach and immediate provisional crown fabrication. Flapless implant placement helps to preserve site morphology by protecting and supporting existing hard and soft tissues while minimizing surgical trauma to the adjacent tissues. Using a previously fabricated acrylic index, a provisional acrylic crown was fabricated on the adjusted temporary abutment and delivered to the patient the same day during the extraction visit. This report describes the diagnosis and treatment of an over-prepared peg-shaped maxillary left lateral incisor associated with multiple crown decementations. The tooth was extracted without flap elevation and an implant was inserted immediately using flapless surgery and placement of an immediate provisional single crown. Flapless implant insertion into fresh extraction sockets and placement of immediate provisional crowns in cases involving the maxillary anterior region represent a viable treatment option in appropriate clinical situations where esthetics are a high priority. The strategy preserves optimum gingival contours and papillary height may be a viable option compared to fixed partial

  7. Mastering aesthetics in post-extraction sites

    NARCIS (Netherlands)

    Goené, R.J.; van Daelen, A.C.L.

    2013-01-01

    Patients increasingly seek implant-supported restorations that can be delivered as quickly and non-invasively as possible. Many also prefer to avoid wearing a removable prothesis after tooth extraction. Implants that are placed immediately in fresh extraction sockets and provisionalized immediately

  8. Placement of endosseous implant in infected alveolar socket with large fenestration defect: A comparative case report

    Directory of Open Access Journals (Sweden)

    Balaji Anitha

    2010-01-01

    Full Text Available Placement of endosseous implants into infected bone is often deferred or avoided due to fear of failure. However, with the development of guided bone regeneration [GBR], some implantologists have reported successful implant placement in infected sockets, even those with fenestration defects. We had the opportunity to compare the osseointegration of an immediate implant placed in an infected site associated with a large buccal fenestration created by the removal of a root stump with that of a delayed implant placed 5 years after extraction. Both implants were placed in the same patient, in the same dental quadrant by the same implantologist. GBR was used with the fenestration defect being filled with demineralized bone graftFNx01 and covered with collagen membraneFNx08. Both implants were osseointegrated and functional when followed up after 12 months.

  9. The tuber extract and flour of Dioscorea alatanormalize the blood lipid profile of rabbits treated with high cholesterol diets

    Directory of Open Access Journals (Sweden)

    Nelis Imanningsih

    2014-08-01

    rabbits treated with high cholesterol diets.Methods:DA tuber extract and flour were administrated to the rabbits for 60 days using completely randomised design. The ration treatment are as follows: 1 Basal ration as negative control (K0, 2 Basal ration + 0.5% cholesterol, as positive control (K1, 3 Basal ration + 0.5% cholesterol + DA extract 1.8 g/100 g (KE1, 4 Basal ration + cholesterol 0.5% + DA extract 3.6 g/100 g (KE2, 5 Basal ration with 15% DA flour + 0.5% cholesterol (KT1 and 6 Basal ration with 30% DA flour + 0.5% cholesterol (KT2. The Total cholesterol, HDL, LDL cholesterol in serum were analysed at baseline, days 28, days 56 and at the end of study.Results:The administration of high cholesterol (1% ration increased blood lipid levels by 16 fold compared to that of control. The administration of 15% and 30% of DA flour could maintain blood lipid profile to normal condition, in particular at 30% substitution DA flour. However the water extract of DA can not maintain a normal blood lipids of high cholesterol treated rabbitsConclusion: Dioscorea alata flour has suggested to have anti-hyperlipidemia effect. (Health Science Indones 2014;1:23-9Key words: Dioscorea alata, hyperlipidemia, atherosclerosis

  10. Protective effect of pumpkin seed extract on sperm characteristics, biochemical parameters and epididymal histology in adult male rats treated with cyclophosphamide.

    Science.gov (United States)

    Aghaei, S; Nikzad, H; Taghizadeh, M; Tameh, A A; Taherian, A; Moravveji, A

    2014-10-01

    Cancer treatment with cyclophosphamide (CP) may result in reproductive toxicity as one of its side effects. The pumpkin seed is a rich natural source of antioxidant. We have assessed the possible protective efficacy of pumpkin seed extract on sperm characteristics, biochemical parameters and epididymal histology of CP-treated rats. Male adult Wistar rats were categorised into four groups. Group 1 served as control and received intraperitoneal (IP) injection of isotonic saline solution. Group 2 rats were treated with CP by IP injection in a single dose of 100 mg/kg body weight, only once. Group 3 and 4 received CP plus 300 and 600 mg/kg pumpkin seed extract respectively. Six weeks after treatment, sperm characteristics, biochemical parameters and histopathological changes were examined. Results showed that, sperm characteristics in CP-treated rats were significantly decreased. Biochemical analysis results showed that the co-administration of 300 mg pumpkin seed extract could increase the total antioxidant capacity (TAC) level significantly. In CP-treated rats, histopathological changes such as vacuolisation, disorganisation and separation of epididymal epithelium were observed as well. Interestingly, pumpkin seed extract could improve the above-mentioned parameters remarkably in CP-treated rats. Our findings indicated that pumpkin seed extract might be used as protective agent against CP-induced reproductive toxicity. © 2013 Blackwell Verlag GmbH.

  11. Reconstruction of highly contracted socket after irradiation with antral mucosa

    International Nuclear Information System (INIS)

    Tanabe, Yosihiko; Masaki, Michiyosi; Kato, Hisakazu

    1999-01-01

    We have repaired 3 cases of the highly contracted socket after irradiation by lining it using antral mucosa and obtained excellent results. Although this procedure requires rhinological skill to obtain the mucosa, it has an advantage leaving no visible scar at the donor site. Usually it is not difficult to obtain a sufficient quantity of the mucous membrane to line a whole socket from one antrum. Besides, it is also easy to line its surface since the shape of antral mucosa is originally in a sac form. All we have to do is making 20 mm long incision to the mucosa, putting a silicone conformer into it, and inlaying it into the graft bed. Thus, having once obtained the mucous membrane, the surgical procedure itself is a quite simple one. (author)

  12. Development of swellable local implants of a polyethyleneimine-poly(vinyl pyrrolidone) (PEI-PVP) hydrogel as a socket filler.

    Science.gov (United States)

    Chang, Ching-Wen; Ho, Hsiu-O; Lo, Yi-June; Lee, Sheng-Yang; Yang, You-Ren; Sheu, Ming-Thau

    2012-01-01

    In this study, hydrogels composed of polyethyleneimine (PEI) and poly(vinyl pyrrolidone) K90 (PVP) cross-linked with various concentrations (0, 0.125, 0.25 and 0.5%) of glutaraldehyde were evaluated as a hydrogel filler for the local delivery of lidocaine after tooth extraction. The drug-release kinetics, swellability, cytotoxicity and wound healing after tooth extraction of these non-cross-linked and cross-linked PEI-PVP hydrogels were examined in male beagles and compared to values using Spongostan(®). Results demonstrated that the extent of cross-linking influenced the swelling of the resulting hydrogel, but the drug-release rates were similar. No significant changes were observed in gingival fibroblasts in contact with the PEI- PVP hydrogels or Spongostan(®). In the in vivo study, PEI-PVP hydrogels showed good retention in the socket for 2 days and showed comparable wound-healing rates within 2 weeks with those of Spongostan(®). In conclusion, PEI-PVP hydrogels are suitable for use as socket-dressing materials, and the release of local anaesthesia from PEI-PVP hydrogels can be sustained for a desirable period of time to prevent pain after a tooth extraction.

  13. Expansion connection of socket in flow distributed cabin of heavy water research reactor inner shell

    International Nuclear Information System (INIS)

    Jiang Zhiliang; Li Yanshui

    1995-01-01

    Expansion connection of aluminium alloy LT21 socket in flow distributed cabin of Heavy Water Research Reactor (HWRR) inner shell is described systematically. The expansion connection technology parameters of products are determined through tests. They are as following: bounce value of inner diameter after expansion, expansion degree, space between socket and plate hole, device for expanding pipes, selection of tools for enlarging or reaming holes, manufacture for socket inner hole and cleaning after expansion

  14. Specification for high voltage cable plug and socket connections for medical X-ray equipment

    International Nuclear Information System (INIS)

    1980-01-01

    Under the direction of the Light Engineering Standards Committee, a British Standard Specification has been prepared for three-conductor and four-conductor high-voltage cable plug and socket connections for medical X-ray equipment. The standard deals with the essential dimensions to ensure mechanical interchangeability, the recommended dimensions, the wiring connections to contacts of plug and socket and the marking of contacts of plug and socket. (U.K.)

  15. The Quantum Socket: Wiring for Superconducting Qubits - Part 2

    Science.gov (United States)

    Bejanin, J. H.; McConkey, T. G.; Rinehart, J. R.; Bateman, J. D.; Earnest, C. T.; McRae, C. H.; Rohanizadegan, Y.; Shiri, D.; Mariantoni, M.; Penava, B.; Breul, P.; Royak, S.; Zapatka, M.; Fowler, A. G.

    Quantum computing research has reached a level of maturity where quantum error correction (QEC) codes can be executed on linear arrays of superconducting quantum bits (qubits). A truly scalable quantum computing architecture, however, based on practical QEC algorithms, requires nearest neighbor interaction between qubits on a two-dimensional array. Such an arrangement is not possible with techniques that rely on wire bonding. To address this issue, we have developed the quantum socket, a device based on three-dimensional wires that enables the control of superconducting qubits on a two-dimensional grid. In this talk, we present experimental results characterizing this type of wiring. We will show that the quantum socket performs exceptionally well for the transmission and reflection of microwave signals up to 10 GHz, while minimizing crosstalk between adjacent wires. Under realistic conditions, we measured an S21 of -5 dB at 6 GHz and an average crosstalk of -60 dB. We also describe time domain reflectometry results and arbitrary pulse transmission tests, showing that the quantum socket can be used to control superconducting qubits.

  16. Technical note: Computer-manufactured inserts for prosthetic sockets.

    Science.gov (United States)

    Sanders, Joan E; McLean, Jake B; Cagle, John C; Gardner, David W; Allyn, Katheryn J

    2016-08-01

    The objective of this research was to use computer-aided design software and a tabletop 3-D additive manufacturing system to design and fabricate custom plastic inserts for trans-tibial prosthesis users. Shape quality of inserts was tested right after they were inserted into participant's test sockets and again after four weeks of wear. Inserts remained properly positioned and intact throughout testing. Right after insertion the inserts caused the socket to be slightly under-sized, by a mean of 0.11mm, approximately 55% of the thickness of a nylon sheath. After four weeks of wear the under-sizing was less, averaging 0.03mm, approximately 15% of the thickness of a nylon sheath. Thus the inserts settled into the sockets over time. If existing prosthetic design software packages were enhanced to conduct insert design and to automatically generate fabrication files for manufacturing, then computer manufactured inserts may offer advantages over traditional methods in terms of speed of fabrication, ease of design, modification, and record keeping. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

  17. The Quantum Socket: Wiring for Superconducting Qubits - Part 3

    Science.gov (United States)

    Mariantoni, M.; Bejianin, J. H.; McConkey, T. G.; Rinehart, J. R.; Bateman, J. D.; Earnest, C. T.; McRae, C. H.; Rohanizadegan, Y.; Shiri, D.; Penava, B.; Breul, P.; Royak, S.; Zapatka, M.; Fowler, A. G.

    The implementation of a quantum computer requires quantum error correction codes, which allow to correct errors occurring on physical quantum bits (qubits). Ensemble of physical qubits will be grouped to form a logical qubit with a lower error rate. Reaching low error rates will necessitate a large number of physical qubits. Thus, a scalable qubit architecture must be developed. Superconducting qubits have been used to realize error correction. However, a truly scalable qubit architecture has yet to be demonstrated. A critical step towards scalability is the realization of a wiring method that allows to address qubits densely and accurately. A quantum socket that serves this purpose has been designed and tested at microwave frequencies. In this talk, we show results where the socket is used at millikelvin temperatures to measure an on-chip superconducting resonator. The control electronics is another fundamental element for scalability. We will present a proposal based on the quantum socket to interconnect a classical control hardware to a superconducting qubit hardware, where both are operated at millikelvin temperatures.

  18. Study on crack generation at root of socket welds

    International Nuclear Information System (INIS)

    Iida, K.; Matsuda, F.; Sato, M.; Nayama, M.; Akitomo, N.

    1996-01-01

    Because a power generation facility is made up of structures that contain a large number of welds, the reliability of weld joints is important to ensure the safety of power plants. Surveys and research are conducted on special weld joints to verify the reliability of power plants. The results of the investigation to verify the relation between the welding conditions and quality of small-diameter socket joints are described. Some defects are observed in the roots of socket-pipe joints of carbon steel in this project. The authors investigate experimentally the effect of the welding parameters on the generation of defects. The defects of the root are found experimentally to be solidification cracking (hot cracking). It is also revealed that a higher heat input and lower wire feed rate generate more hot cracking at the root of a weld. The authors also give a hypothesis that explains the generation mechanism of hot cracks at the root of a socket-pipe joint, based on finite element modelling analysis and other information. (orig.)

  19. EXTRACT

    DEFF Research Database (Denmark)

    Pafilis, Evangelos; Buttigieg, Pier Luigi; Ferrell, Barbra

    2016-01-01

    The microbial and molecular ecology research communities have made substantial progress on developing standards for annotating samples with environment metadata. However, sample manual annotation is a highly labor intensive process and requires familiarity with the terminologies used. We have the...... and text-mining-assisted curation revealed that EXTRACT speeds up annotation by 15-25% and helps curators to detect terms that would otherwise have been missed.Database URL: https://extract.hcmr.gr/......., organism, tissue and disease terms. The evaluators in the BioCreative V Interactive Annotation Task found the system to be intuitive, useful, well documented and sufficiently accurate to be helpful in spotting relevant text passages and extracting organism and environment terms. Comparison of fully manual...

  20. Greenhouse studies on the phyto-extraction capacity of Cynodon nlemfuensis for lead and cadmium under irrigation with treated wastewater

    Science.gov (United States)

    Madyiwa, S.; Chimbari, M. J.; Schutte, C. F.; Nyamangara, J.

    For over 30 years, discharge of sewage effluent and sludge on pasturelands has been used in Zimbabwe as a cheap method for secondary treatment of wastewater without any monitoring of accumulation of heavy metals in soils and grasses, let alone in animals grazing on the pastures. Cynodon nlemfuensis (star grass) has been the main grass planted on the wastewater irrigated pasturelands. This study was conducted to assess the capacity of star grass to accumulate lead (Pb) and cadmium (Cd) and develop models incorporating grass yield, metal uptake and soil bio-available (EDTA extractable) metal content, that could be used to determine critical grass and soil concentrations at which grass productivity declines. Star grass was planted in 30 fertilized pots containing sandy soil within a greenhouse. The pots consisted of nine treatments of varying levels of added inorganic Pb and Cd subjected to treated wastewater application and one control that had no added metals and received water application only. The elements were applied to the soils once just after planting the grass. Chemical analyses showed that star grass had a relatively high phyto-extraction capacity of Pb and Cd, comparable to that of hyper-accumulating grasses such as Lolium perenne (rye grass). It accumulated Pb and Cd to levels far beyond the recommended maximum limits for pasture grass. Analysis of variance on log-normal transformed data showed that bio-available soil metal concentrations correlated strongly with grass metal content and grass metal content correlated strongly with the yield. There was however a weak correlation between the yield and bio-available soil levels. The yield versus grass metal content models that were developed for the first crop and re-growth predicted similar critical metal concentrations and yields. Using the critical grass metal concentrations in the soil bio-available metal concentration versus grass metal concentration models allowed for the prediction of the

  1. Sensory and chemical assessment of silver pomfret (Pampus argenteus treated with Ginkgo biloba leaf extract treatment during storage in ice

    Directory of Open Access Journals (Sweden)

    Weiqing Lan

    2018-01-01

    Full Text Available This study investigated the physical (L*, a*, b*, texture profile analyses, pH, chemical (TVB-N, K value and TBA, microbiological, amino acid content, and flavor effects that Gingko biloba leaf extract (GBLE had on silver pomfret (Pampus argenteus stored at 4 ± 1 °C in ice for 18 days. Fresh pomfret samples were obtained directly from the local fish market and transported to the laboratory with ice immediately. After being gutted, washed, filleted and trimmed in a water-ice mixture, samples were treated with different concentrations of GBLE (0.0 mg/mL, 2.5 mg/mL, 5.0 mg/mL, 10.0 mg/mL and packaged in Polyethylene bag, then stored in a refrigerator at 4 ± 1 °C with ice. The results show that the shelf-life of untreated (0.0 mg/mL pomfret samples was 8–9 days compared to 14–15 days for the GBLE1 (2.5 mg/mL treated group. The assessment results showed that different concentrations of GBLE had variable effects on preserving the texture parameters of acceptability limit, inhibit lipid oxidation, protein degradation, and microorganism growth. 2.5 mg/mL of GBLE was the best for the preservation of pomfret during storage in ice. Therefore, there is potential use for GBLE as a preservative to extend the shelf-life of pomfret during chilled storage in ice.

  2. Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Dimensions of sockets - Metric series

    CERN Document Server

    International Organization for Standardization. Geneva

    1985-01-01

    Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Dimensions of sockets - Metric series

  3. Toxicological assessment of enzyme-treated asparagus extract in rat acute and subchronic oral toxicity studies and genotoxicity tests.

    Science.gov (United States)

    Ito, Tomohiro; Ono, Tomoko; Sato, Atsuya; Goto, Kazunori; Miura, Takehito; Wakame, Koji; Nishioka, Hiroshi; Maeda, Takahiro

    2014-03-01

    The safety of enzyme-treated asparagus extract (ETAS) developed as a novel anti-stress functional material was assessed in acute and subchronic studies and genotoxicity assays. In the acute oral dose toxicity study, all rats survived during the test period and ETAS did not influence clinical appearance, body weight gain and necropsy findings at a dosage of 2000mg/kg body weight. Thus, the 50% lethal dose (LD50) of ETAS was determined to be greater than 2000mg/kg. The 90-day subchronic study (500, 1000 and 2000mg/kg body weight, delivered by gavage) in rats reported no significant adverse effects in food consumption, body weight, mortality, urinalysis, hematology, biochemistry, necropsy, organ weight and histopathology. In the micronucleus test of mice, the incidence of micronuclei in ETAS-administered groups (500, 1000 and 2000mg/kg/day, injected twice) was equivalent to that of the negative control group, while the positive control group receiving mitomycin C showed a high incidence. The potential of ETAS to induce gene mutation was tested using four Salmonella typhimurium strains and Escherichia coli WP2uvrA. The test sample was not mutagenic to the test strains. These results support the safety of ETAS as food and dietary supplement. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. Pain Control Following Impacted Third Molar Surgery with Bupivacaine Irrigation of Tooth Socket: A Prospective Study

    Directory of Open Access Journals (Sweden)

    Reza Khorshidi Khiavi

    2010-12-01

    Full Text Available Background and aims. The surgical removal of the lower third molars is a procedure generally followed by side effects such as postoperative pain. The aim of this study was to evaluate the efficacy of socket irrigation with an anesthetic solution in relieving pain following impacted third molar surgery. Materials and methods. Thirty-four patients (17 males and 17 females, aged 18-24 years, with bilateral impacted lower third molars were selected. Both third molars were extracted in one surgical session. Tooth sockets in each patient were rinsed randomly either with 4 mL of 0.5% bupivacaine hydrochloride plain (without vasoconstrictor anesthetic solution or 4 mL of normal saline, used as control. The patients were instructed not to use analgesics as long as possible, and if not, they were instructed to use an analgesic, and record the time. Pain severity was assessed using a visual analogue pain scale (VAPS at 1-, 6-, 12-, and 24-hour intervals post-operatively. Data were analyzed using Pearson’s chi-square test and P <0.05 was considered statistically significant. Results. Post-operative pain difference between the two groups was statistically significant at 1-, 6-, 12- and 24-hour postoperative intervals (P <0.05. Post-operative pain increased in both groups to a maximum 12 hours after surgery with significant improvements after that. Conclusion. Based on the results, the irrigation of surgery site with bupivacaine after third molar surgery significantly reduces post-operative pain.

  5. A histomorphometric study of the effect of doxycycline and erythromycin on bone formation in dental alveolar socket of rat

    Directory of Open Access Journals (Sweden)

    Mohammad Shahabooei

    2015-01-01

    Full Text Available Background: The aim of the present study was to evaluate whether subantimicrobial doses of doxycycline (DOX and erythromycin (EM used for the treatment of peri-implant osteolysis due to their anti-osteoclastogenesis can interfere with the osseous wound healing process in rat alveolar socket. Materials and Methods: Forty-five male Wistar rats had their first maxillary right molar extracted and were divided into three groups. DOX and EM at the doses of 5 mg/kg/day orally (p.o. and 2 mg/kg/day intraperitoneally (i.p. were administered respectively to two separate groups for 7 days after operation. In the control group the animals received normal saline (5 ml/kg. Five rats were sacrificed at 7, 14 and 21 days post-extraction in each study group. A histomorphometric analysis was used to evaluate new bone formation inside the alveolar socket. Significant level was set at 0.05. Results: The findings showed that the percentage of new bone formation (NBF enhanced significantly on days 7 and 14. There was no significant difference in the NBF between DOX and EM groups. Conclusion: Short-term treatment with both DOX and EM enhanced new bone formation without any advances in favor of each drug.

  6. Effects of low-level laser therapy on orthodontic tooth movement and root resorption after artificial socket preservation

    Directory of Open Access Journals (Sweden)

    Massoud Seifi

    2014-01-01

    Full Text Available Background: Low- level laser therapy has been used to stimulate the orthodontic tooth movements (OTM previously. Furthermore, in the orthodontic treatments accompanying tooth extractions, the adjacent teeth move towards the extraction sites and close the space in some cases. Then, the adjacent tooth movements must be prevented in the treatments requiring space. Laser stimulates and at some doses decelerates tooth movement; it also improves healing process and enhances osteogenesis. Hence, it can prevent movement by osteogenesis adjacent to the tooth. The present study investigated the effects of low-level laser therapy on the OTM and root resorption following artificial socket preservation. Materials and Methods: In this experimental animal trial, 16 male albino rabbits were selected with similar characteristics and randomly divided in two groups. Under general anesthesia, an artificial socket, 8 mm in height, was created in the mesial aspect of the first premolars of the rabbits and filled with demineralized freeze dried bone allograft (DFDBA. The first premolars were connected to the incisors using nickel titanium coil springs. In experimental group, gallium-aluminum-arsenide (GaAlAs laser was irritated mesial to first premolar where artificial socket was created continuously (808 nm. The cycle was 10 days irritation, 14 days rest, 10 days irritation, 14 days rest (Biostimulation mode. Control group was not laser irradiated. All animals were sacrificed after 48 days and the distance between the distal aspect of the first premolars, and the mesial surface of the second premolars was measured with leaf gauge. The specimens underwent histological assessments. Integrity of root and its resorption was observed under microscope calibration. The size of resorption lacunae was calculated in mm 2 . Normality of data was proved according to Kolmogorov-Smirnov analysis, and Student′s t-test was done. P value less than 0.05 was considered as significant

  7. Protective effect of combined pumpkin seed and ginger extracts on sperm characteristics, biochemical parameters and epididymal histology in adult male rats treated with cyclophosphamide.

    Science.gov (United States)

    Aghaie, Somaieh; Nikzad, Hossein; Mahabadi, Javad Amini; Taghizadeh, Mohsen; Azami-Tameh, Abolfazl; Taherian, Aliakbar; Sajjadian, Seyyed Mohammad Sajjad; Kamani, Mehran

    2016-09-01

    Reproductive toxicity is one of the side effects of cyclophosphamide (CP) in cancer treatment. Pumpkin seeds and Zingiber officinale are natural sources of antioxidants. We investigated the possible protective effect of combined pumpkin seed and Zingiber officinale extracts on sperm characteristics, epididymal histology and biochemical parameters of CP-treated rats. Male adult Wistar rats were divided randomly into six groups. Group 1, as a control, received an isotonic saline solution injection intraperitoneally (IP). Group 2 were injected IP with a single dose of CP (100 mg/kg) once. Groups 3 and 4 received CP plus 300 and 600 mg/kg combined pumpkin seed and Zingiber officinale extract (50:50). Groups 5 and 6 received only 300 and 600 mg/kg combined pumpkin seed and Zingiber officinale extract. Six weeks after treatment, sperm characteristics, histopathological changes and biochemical parameters were assessed. In CP-treated rats, motile spermatozoa were decreased, and abnormal or dead spermatozoa increased significantly (P < 0.001) but administration of the mixed extract improved sperm parameters. Epididymal epithelium and fibromascular thickness were also improved in extract-treated rats compared to control or CP groups. Biochemical analysis showed that the administration of combined extracts could increase the total antioxidant capacity (TAC) level significantly in groups 3, 4, 5 and 6. Interestingly, the mixed extract could decrease most of the side effects of CP such as vacuolization and separation of epididymal tissue. Our findings indicated that the combined extracts might be used as a protective agent against CP-induced reproductive toxicity.

  8. Mechanisms involved in control of ¤Blumeria graminis¤ f.sp. ¤hordei¤ in barley treated with mycelial extracts from cultured fungi

    DEFF Research Database (Denmark)

    Haugaard, H.; Collinge, D.B.; Lyngkjær, Michael Foged

    2002-01-01

    associated with papilla formation was detected. However, a post-penetration effect was observed, as B. graminis colonies on mycelial extract-treated leaves produced 50% fewer hyphae than on controls. Northern blot analyses showed earlier accumulation of defence-related gene transcripts following treatment...

  9. Measurement of the 232Th-series activity in gas sockets

    International Nuclear Information System (INIS)

    Sutarman, I.

    1995-01-01

    The activity of 232 Th and its daughters in Th-based gas sockets is required for health risk assessment. By absolute measurement of the 228 Ac-and 212 Pb/ 208 Tl-activities, the total activity of the sockets can be assessed. It is governed by 228 Ra and 228 Th and the product age. (author) 1 fig.; 2 tabs

  10. Development of socketed foundations for S3X5.7 posts.

    Science.gov (United States)

    2015-04-01

    The objective of this study was to develop a socketed foundation for use with the S3x5.7 (S76x8.5) weak : post. The design focused on cylindrical, reinforced concrete foundations with a steel tube placed in the center for : use as the socket. The fou...

  11. Development of new apple beverages rich in isothiocyanates by using extracts obtained from ultrasound-treated cauliflower by-products

    DEFF Research Database (Denmark)

    Amofa-Diatuo, Tracy; Anang, Daniel M.; Barba Orellana, Francisco Jose

    2017-01-01

    The objective of this study was to develop a new apple juice beverage enriched with isothiocyanates (ITC) - rich extracts obtained from cauliflower by-products. Ultrasound-assisted extraction (UAE) at different amplitudes (20-100%) and extraction times (0-10. min) at a frequency of 24. kHz was em......The objective of this study was to develop a new apple juice beverage enriched with isothiocyanates (ITC) - rich extracts obtained from cauliflower by-products. Ultrasound-assisted extraction (UAE) at different amplitudes (20-100%) and extraction times (0-10. min) at a frequency of 24. k......) and UAE (20%, 3. min), respectively. Moreover, the highest recovery of total phenolic compounds (TPC) (≈105. mg gallic acid equivalent (GAE)/L) μM) was found after UAE (100% amplitude, 3. min) of TPC from stems. ITC-rich extracts obtained from caulifower by-products at the optimum UAE conditions were...

  12. CAD/CAM transtibial prosthetic sockets from central fabrication facilities: How accurate are they?

    Science.gov (United States)

    Sanders, Joan E.; Rogers, Ellen L.; Sorenson, Elizabeth A.; Lee, Gregory S.; Abrahamson, Daniel C.

    2014-01-01

    This research compares transtibial prosthetic sockets made by central fabrication facilities with their corresponding American Academy of Orthotists and Prosthetists (AAOP) electronic shape files and assesses the central fabrication process. We ordered three different socket shapes from each of 10 manufacturers. Then we digitized the sockets using a very accurate custom mechanical digitizer. Results showed that quality varied considerably among the different manufacturers. Four of the companies consistently made sockets within +/−1.1% volume (approximately 1 sock ply) of the AAOP electronic shape file, while six other companies did not. Six of the companies showed consistent undersizing or oversizing in their sockets, which suggests a consistent calibration or manufacturing error. Other companies showed inconsistent sizing or shape distortion, a difficult problem that represents a most challenging limitation for central fabrication facilities. PMID:18247236

  13. Unix Domain Sockets Applied in Android Malware Should Not Be Ignored

    Directory of Open Access Journals (Sweden)

    Xu Jiang

    2018-03-01

    Full Text Available Increasingly, malicious Android apps use various methods to steal private user data without their knowledge. Detecting the leakage of private data is the focus of mobile information security. An initial investigation found that none of the existing security analysis systems can track the flow of information through Unix domain sockets to detect the leakage of private data through such sockets, which can result in zero-day exploits in the information security field. In this paper, we conduct the first systematic study on Unix domain sockets as applied in Android apps. Then, we identify scenarios in which such apps can leak private data through Unix domain sockets, which the existing dynamic taint analysis systems do not catch. Based on these insights, we propose and implement JDroid, a taint analysis system that can track information flows through Unix domain sockets effectively to detect such privacy leaks.

  14. Numerical analysis of two pile caps with sockets embedded, subject the eccentric compression load

    Directory of Open Access Journals (Sweden)

    R. G. Delalibera

    Full Text Available The structural behavior of pile caps with sockets embedded is influenced by interface of column-socket, which can be smooth or rough. With intent to analyze the behavior of two pile caps with embedded socket, considering the friction between the column and the socket, with eccentric normal load, the numerical simulations were carried out, using a program based on the Finite Element Methods (FEM. In the numerical analysis the non-linear behavior of materials was considered, also the friction between the column and the socket. It was considered perfect bond between the reinforcement and the concrete around. It was observed that the embedded length is preponderant factor in the structural behavior of the analyzed element.

  15. Finite element analysis of the contact interface between trans-femoral stump and prosthetic socket.

    Science.gov (United States)

    Zhang, Linlin; Zhu, Ming; Shen, Ling; Zheng, Feng

    2013-01-01

    Transfemoral amputees need prosthetic devices after amputation surgery, and the interface pressure between the residual limb and prosthetic socket has a significant effect on an amputee's satisfaction and comfort. The purpose of this study was to build a nonlinear finite element model to investigate the interface pressure between the above-knee residual limb and its prosthetic socket. The model was three-dimensional (3D) with consideration of nonlinear boundary conditions. Contact analysis was used to simulate the friction conditions between skin and the socket. The normal stresses up to 80.57 kPa at the distal end of the soft tissue. The longitudinal and circumferential shear stress distributions at the limb-socket interface were also simulated. This study explores the influences of load transfer between trans-femoral residual limb and its prosthetic socket.

  16. Persistent socket pain postenucleation and post evisceration: a systematic review.

    Science.gov (United States)

    Hogeboom, Charlotte S E; Mourits, Daphne L; Ket, Johannes C F; Tan, H Stevie; Hartong, Dyonne T; Moll, Annette C

    2018-04-06

    To investigate causes, diagnostics and treatment modalities for persistent socket pain (PSP) after enucleation and evisceration. A systematic search was undertaken in accordance with the PRISMA Statement, in PubMed, Embase.com and Thomson Reuters/Web of Science. We searched for relevant papers until the 28th of July 2016. Inclusion criteria were (1) patients with a history of enucleation or evisceration, (2) PSP, (3) report of the cause and/or used diagnostics and/or treatment modality, (4) full text in English, Dutch or Spanish language. Excluded were (1) review articles, (2) comments, and publications concerning, (3) nonhumans, (4) exenterated patients, (5) acute postoperative pain, or (6) periorbital pain without pain in the socket. Given the lack of high quality evidence from randomized controlled trials, we examined all available evidence from primary observational studies and assessed quality within this lower level of evidence. A total of 32 studies were included. Causes of PSP found were prosthesis-related (n = 5), dry socket (n = 2), trochleitis (n = 3), compression of the trigeminal nerve (n = 2), implant-related (n = unknown), inflammation (n = 5), surgery-related (n = 4), neuromas (n = 8), malignant tumours (n = 3), psychiatric/psychosocial (n = 2), phantom pain (n = 149), rarer entities (n = 3) or unknown (n = 14). Nonsurgical treatments suffice for conditions as trochleitis, prosthesis-related pain, dry socket and for phantom pain. Other causes of pain may require more invasive treatments such as implant removal. Careful history and examination can give some direction in the diagnostic procedure; however, PSP is probably multifactorial and the specific origin(s) may remain uncertain. Implant replacement can be an effective treatment. Studies to identifiy less invasive procedures are required. © 2018 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

  17. [Intra-prosthetic dislocation of the Bousquet dual mobility socket].

    Science.gov (United States)

    Lecuire, F; Benareau, I; Rubini, J; Basso, M

    2004-05-01

    The Bousquet system is a dual mobility head-polyethylene polyethylene-metal cup socket. The polyethylene insert retaining the femoral head moves in the noncemented metal cup, increasing both mobility and stability. Between 1989 and 1997, seven cases of intra-prosthetic dislocation (six patients) were observed. The femoral head escaped from the polyethylene insert due to wear. On the average, this complication occurred ten Years after implantation. Risk of dislocation was high in six of the seven hips. All patients had a large sized stem screwed into the femoral neck. There was a characteristic radiological aspect with loss of the concentric head metal cup configuration. The head was applied against the upper wall of the metal cup. Surgical replacement was undertaken early in six patients by simply changing the insert without modifying the other stable components. Outcome remained good at three to eight Years. One patient underwent late surgery. The insert and the cup were replaced with a classical implant. Functional outcome was good but recurrent dislocation occurred. At mid-term, intra-prosthetic dislocation of dual mobility sockets appears to be exceptional. Dislocation results from polyethylene wear leading to failure of the insert to retain the prosthetic head. Wear is favored by direct phenomena (direct contact between neck and insert which can occur early if there is a small difference in the head and neck diameters) or indirect phenomena (factors limiting polyethylene metal-cup mobility). Surgical treatment is necessary. If undertaken early, replacement with a modular head and insert can be sufficient if the prosthesis has not loosened but the metal cup may have to be replaced in the event of metal-metal contact between the head and the cup. Prosthesis loosening, wear of the metal cup, or an identified cause of dislocation imply replacing the failing implants. Implantation of the dual mobility system is particularly interesting for patients with a high risk

  18. Surface crack behavior in socket weld of nuclear piping under fatigue loading condition

    International Nuclear Information System (INIS)

    Choi, Y.H.; Kim, J.S.; Choi, S.Y.

    2005-01-01

    The ASME B and PV Code Sec. III allows the socket weld for the nuclear piping in spite of the weakness on the weld integrity. Recently, the integrity of the socket weld is regarded as a safety concern in nuclear power plants because many failures and leaks have been reported in the socket weld. OPDE (OECD Piping Failure Data Exchange) database lists 108 socket weld failures among 2,399 nuclear piping failure cases during 1970 to 2001. Eleven failures in the socket weld were also reported in Korean NPPs. Many failure cases showed that the root cause of the failure is the fatigue and the gap requirement for the socket weld given in ASME Code was not satisfied. The purpose of this paper is to evaluate the fatigue crack behavior of a surface crack in the socket weld under fatigue loading condition considering the gap effect. Three-dimensional finite element analysis was performed to estimate the fatigue crack behavior of the surface crack. Three types of loading conditions such as the deflection due to vibration, the pressure transient ranging from P=0 to 15.51 MPa, and the thermal transient ranging from T=25 C to 288 C were considered. The results are as follows; 1) The socket weld is susceptible to the vibration where the vibration levels exceed the requirement in the ASME operation and maintenance (OM) Code. 2) The effect of pressure or temperature transient load on the socket weld integrity is not significant. 3) No-gap condition gives very high possibility of the crack initiation at the socket weld under vibration loading condition. 4) For the specific systems having the vibration condition to exceed the requirement in the ASME Code OM and/or the transient loading condition from P=0 and T=25 C to P=15.51 MPa and T=288 C, radiographic examination to examine the gap during the construction stage is recommended. (orig.)

  19. Increase of survival of x-irradiated mice by postirradiation injections of a splenic extract prepared from vaccine or endotoxin-treated syngeneic animals

    Energy Technology Data Exchange (ETDEWEB)

    Tsuneoka, K; Takagi, Y; Shikita, M [National Inst. of Radiological Sciences, Chiba (Japan)

    1977-05-01

    Spleens of mice which had been treated with E. coli endotoxin or typhoid-paratyphoid vaccine were extracted with isotonic saline. The extract was filtered through an asbestos filter and chromatographed on a Sephadex G-200 column. The fraction which was excluded at around 2.5-void volume (molecular weight, about 20,000) was significantly effective in increasing survival of animals when it was repeatedly injected in mice after x irradiation (600 R). The injection caused an increase of the weight of spleen of the animals with an increased number of endogenous spleen colonies. The result suggests that the life-saving effect of the spleen extract is based on its effect of stimulating repopulation of autochthonous hematopoietic cells in the x-irradiated animals. A similar splenic extract prepared from normal mice had an ambiguous effect on the survival of x-irradiated animals.

  20. Utilization of d-PTFE Barriers for Post-Extraction Bone Regeneration in Preparation for Dental Implants.

    Science.gov (United States)

    Greenstein, Gary; Carpentieri, Joseph R

    2015-01-01

    Guided bone regeneration (GBR) can be used to restore a defective alveolar ridge after extractions before or in combination with implant placement. It may also be employed after extractions to reduce crestal bone resorption and maximize bone fill of sockets. Resorbable or nonresorbable barriers (eg, expanded polytetrafluoroethylene [e-PTFE]) can be used when performing GBR procedures, but they need to be completely submerged to attain optimal results. Dense polytetrafluoroethylene (d-PTFE) is a type of nonresorbable barrier that circumvents the necessity to attain primary closure after placement of bone grafts, thereby reducing patient morbidity. This article addresses topics pertaining to d-PTFE utilization, including characteristics and advantages of d-PTFE barriers, time needed for osteoid tissue to become impervious to penetration by flap connective tissue, relevant clinical studies, and limitations of available data. Clinical photographs and radiographs of successfully treated cases are presented to illustrate the efficacy of d-PTFE barriers in regenerating defective bony plates after extractions.

  1. Ridge Preservation with Modified “Socket-Shield” Technique: A Methodological Case Series

    Directory of Open Access Journals (Sweden)

    Markus Glocker

    2014-01-01

    Full Text Available After tooth extraction, the alveolar bone undergoes a remodeling process, which leads to horizontal and vertical bone loss. These resorption processes complicate dental rehabilitation, particularly in connection with implants. Various methods of guided bone regeneration (GBR have been described to retain the original dimension of the bone after extraction. Most procedures use filler materials and membranes to support the buccal plate and soft tissue, to stabilize the coagulum and to prevent epithelial ingrowth. It has also been suggested that resorption of the buccal bundle bone can be avoided by leaving a buccal root segment (socket shield technique in place, because the biological integrity of the buccal periodontium (bundle bone remains untouched. This method has also been described in connection with immediate implant placement. The present case report describes three consecutive cases in which a modified method was applied as part of a delayed implantation. The latter was carried out after six months, and during re-entry the new bone formation in the alveolar bone and the residual ridge was clinically evaluated as proof of principle. It was demonstrated that the bone was clinically preserved with this method. Possibilities and limitations are discussed and directions for future research are disclosed.

  2. Factors affecting incidence of dry socket: a prospective community-based study.

    Science.gov (United States)

    Parthasarathi, Krishnan; Smith, Andrew; Chandu, Arun

    2011-07-01

    Dry socket, or alveolar osteitis, can occur because of the removal of teeth. No clear etiology has been acknowledged; however, numerous risk factors have been proposed and tested. We report on the results of a prospective, multicenter study of the incidence and factors affecting the occurrence of alveolar osteitis at the Royal Dental Hospital of Melbourne and Community Dental Clinics in Melbourne, Australia. Ethics approval was gained from the University of Melbourne and Dental Health Services Victoria. The data were analyzed in a descriptive fashion, and the factors affecting alveolar osteitis were assessed using logistic regression analysis. The incidence of alveolar osteitis was 2.3% of all teeth extracted, with 4.2% of all patients experiencing alveolar osteitis in a public dental setting. Multivariate analysis revealed operator experience, perioperative crown and root fractures, periodontal disease, posterior teeth, and, interestingly, the use of mental health medications to be significant independent risk factors for the development of alveolar osteitis. No alveolar osteitis was reported in patients taking antibiotics, the oral contraceptive pill, bisphosphonates, or oral steroid drugs. Smoking and extraction technique (either operative or nonoperative) were also not found to significantly affect the development of alveolar osteitis. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  3. The Quantum Socket: Wiring for Superconducting Qubits - Part 1

    Science.gov (United States)

    McConkey, T. G.; Bejanin, J. H.; Rinehart, J. R.; Bateman, J. D.; Earnest, C. T.; McRae, C. H.; Rohanizadegan, Y.; Shiri, D.; Mariantoni, M.; Penava, B.; Breul, P.; Royak, S.; Zapatka, M.; Fowler, A. G.

    Quantum systems with ten superconducting quantum bits (qubits) have been realized, making it possible to show basic quantum error correction (QEC) algorithms. However, a truly scalable architecture has not been developed yet. QEC requires a two-dimensional array of qubits, restricting any interconnection to external classical systems to the third axis. In this talk, we introduce an interconnect solution for solid-state qubits: The quantum socket. The quantum socket employs three-dimensional wires and makes it possible to connect classical electronics with quantum circuits more densely and accurately than methods based on wire bonding. The three-dimensional wires are based on spring-loaded pins engineered to insure compatibility with quantum computing applications. Extensive design work and machining was required, with focus on material quality to prevent magnetic impurities. Microwave simulations were undertaken to optimize the design, focusing on the interface between the micro-connector and an on-chip coplanar waveguide pad. Simulations revealed good performance from DC to 10 GHz and were later confirmed against experimental measurements.

  4. Control and Measurement of an Xmon with the Quantum Socket

    Science.gov (United States)

    McConkey, T. G.; Bejanin, J. H.; Earnest, C. T.; McRae, C. R. H.; Rinehart, J. R.; Weides, M.; Mariantoni, M.

    The implementation of superconducting quantum processors is rapidly reaching scalability limitations. Extensible electronics and wiring solutions for superconducting quantum bits (qubits) are among the most imminent issues to be tackled. The necessity to substitute planar electrical interconnects (e.g., wire bonds) with three-dimensional wires is emerging as a fundamental pillar towards scalability. In a previous work, we have shown that three-dimensional wires housed in a suitable package, named the quantum socket, can be utilized to measure high-quality superconducting resonators. In this work, we set out to test the quantum socket with actual superconducting qubits to verify its suitability as a wiring solution in the development of an extensible quantum computing architecture. To this end, we have designed and fabricated a series of Xmon qubits. The qubits range in frequency from about 6 to 7 GHz with anharmonicity of 200 MHz and can be tuned by means of Z pulses. Controlling tunable Xmons will allow us to verify whether the three-dimensional wires contact resistance is low enough for qubit operation. Qubit T1 and T2 times and single qubit gate fidelities are compared against current standards in the field.

  5. Protective effect of ellagic acid on healing alveolar bone after tooth extraction in rat--a histological and immunohistochemical study.

    Science.gov (United States)

    Al-Obaidi, Mazen M Jamil; Al-Bayaty, Fouad Hussain; Al Batran, Rami; Hassandarvish, Pouya; Rouhollahi, Elham

    2014-09-01

    This study has attempted to evaluate the effects of ellagic acid (EA) on alveolar bone healing after tooth extraction in rats. Twenty-four Sprague Dawley (SD) male rats (200-250g) were selected and were anaesthetised for the extraction of upper left incisor. Then, the rats were divided into two groups, comprising 12 rats each; the first group has been considered as a control group and was given only normal saline, whereas, the second group (treated group) was intragastrically administrated with EA daily once, for 28 days. Then three rats from each group had been selected on 7th, 14th, 21st, and 28th days to dissect their maxilla tissue either for histological observation and homogenisation purposes. The tissues fixed, decalcified and embedded in paraffin. Serial sections of 5μm thickness were prepared and stained with haematoxylin and eosin (H&E) for the histological study. Similar sections were taken for immunohistochemical analysis to assess osteocalcin (OSC) and osteopontin (OPN). Furthermore, Malondialdehyde (MDA) and superoxide dismutase (SOD) were measured in homogenated gingival maxilla tissue of rat by commercial kit. Based on the histological analysis we have identified that, EA treatment has induced earlier trabecular bone deposition in the treated group, resulting in more organised bone matrix on the 14th, 21st, and 28th days after tooth extraction, as against the control group. In comparison to control group, the positive labelling of OSC and OPN of the treated group have been highly expressed in the alveolar socket on 14th, and 21st days, which has indicated a the possibility of formation of new bone trabeculae at the beginning of the mineralisation process, after tooth extraction. In the EA treatment group, lipid per-oxidation (MDA) was significantly decreased (Phealing process in teeth socket of rats. Furthermore, the EA treated group showed a stronger positive immunolabelling for OSC and OPN, when compared with the control group. Copyright © 2014

  6. Effect of 0.2% Chlorhexidine Gel on Frequency of Dry Socket Following Mandibular Third Molar Surgery: A Double-Blind Clinical Trial Clinical Trial

    Directory of Open Access Journals (Sweden)

    Baratollah Shaban

    2014-09-01

    Full Text Available Introduction: Alveolar osteitis (AO is one of the most common postoperative complications after third molar surgery. Various techniques have been used to reduce the risk of AO. The aim of the current study was to evaluate the effect of Chlorhexidine (CHX bioadhesive gel in preventing the development of AO. Methods: Patients with bilateral impacted mandibular third molars underwent surgical extraction of both teeth. One socket was randomly received CHX gel and the contralateral socket served as the control. The outcome variable was development of AO and the CHX gel application was the predictor variable. Data were analyzed using chi-square test with the confidence interval of 95%. Results: 41 patients (27 females and 14 males with mean age of 24.15 ± 5.02 years underwent 82 surgeries. Total of 11 sockets (13.41% developed AO. The frequency of AO in CHX gel (2 cases, 4.87% side was significantly lower than control (9 cases, 21.95% side (P-value < 0.05. No side effects observed following CHX gel application. Conclusion: Application of CHX gel could be an effective approach to reduce the risk of developing AO following mandibular third molar surgery.

  7. Case study: survey of patient satisfaction with prosthesis quality and design among below-knee prosthetic leg socket users.

    Science.gov (United States)

    Mohd Hawari, Nurhanisah; Jawaid, Mohammad; Md Tahir, Paridah; Azmeer, Raja Ahmad

    2017-11-01

    The aim of this case study was to explore patient satisfaction with the quality of prosthetic leg sockets intended for persons with lower limb amputations. A qualitative study based on in-depth interviews, preceded by a questionnaire session, was carried out with patients from the Rehabilitation Center and Hospital in Malaysia. Twelve out-patient and in-patient amputees with lower limb amputations, specifically below-knee amputations, were chosen randomly. The analysis of patients' narratives aimed to identify the functional and esthetic characteristics of currently used prosthetic leg sockets and any problems related to them. The obtained results indicated that out of the 12 participants, 41.7% and 25% were satisfied and somewhat satisfied with their current prosthetic sockets. Durability and comfort were rated by the participants as the most important characteristics of prosthetic sockets, with 83.3%. As regards the esthetic appearance of the socket, 66.7% of the respondents considered that the most important feature was the material from which the socket was fabricated. Thus, we conclude that current satisfaction levels with the quality of prosthetic sockets among amputees in Malaysia are suitable, prosthesis being preferred by many amputees. The results can be used to direct future research on cosmesis and functionality of prosthetic socket design. Implications for Rehabilitation Case study will help participants to get cost effective prosthetic leg socket. Develop prosthetic leg socket comfortable as comparative to existing one. Help Malaysian government to make policy to develop local prosthetic leg socket at affordable price.

  8. Serum hepatic biochemistry and electrophoretic protein profile of healthy and Ehrlich tumor-bearing mice treated with extracts of Agaricus blazei Murill

    Directory of Open Access Journals (Sweden)

    Durval Verçosa Junior

    2016-04-01

    Full Text Available Compounds isolated from Agaricus blazei Murill represent a group of promising natural immunomodulators for use in the treatment of neoplasms. We have evaluated the serum biochemical profile of healthy and Ehrlich tumor-bearing mice treated with different extracts of A. blazei. Total, supernatant, and polysaccharide extracts of A. blazei were obtained from suspensions (at acidic or neutral pH kept in a water bath at 60 °C or in an ultrasonic bath at 37 °C. After oral administering the extracts to mice for 21 days, blood samples were collected for determination of aspartate aminotransferase (AST, alanine aminotransferase (ALT, creatine kinase (CK, urea, total protein, albumin, globulins, and alpha-, beta- and gamma-globulin fractions. The presence of the tumor led to a significant increase in serum CK and AST activities and in the concentrations of total globulin and the gamma-globulin fraction, and to a decrease in the albumin and alpha2-globulin levels. The polysaccharide extracts of A. blazei reduced the serum AST and ALT activities, probably due to a hepatoprotective effect. In addition, polysaccharide and supernatant extracts inhibited the tumor-induced increase in gamma-globulin levels. Thus, the supernatant and polysaccharide fractions of the extract of A. blazei have potential for use in complementary antineoplastic treatments.

  9. Fatty acids characterization, oxidative perspectives and consumer acceptability of oil extracted from pre-treated chia (Salvia hispanica L.) seeds.

    Science.gov (United States)

    Imran, Muhammad; Nadeem, Muhammad; Manzoor, Muhammad Faisal; Javed, Amna; Ali, Zafar; Akhtar, Muhammad Nadeem; Ali, Muhammad; Hussain, Yasir

    2016-09-20

    Chia (Salvia hispanica L.) seeds have been described as a good source of lipids, protein, dietary fiber, polyphenolic compounds and omega-3 polyunsaturated fatty acids. The consumption of chia seed oil helps to improve biological markers related to metabolic syndrome diseases. The oil yield and fatty acids composition of chia oil is affected by several factors such as pre-treatment method and size reduction practices. Therefore, the main mandate of present investigate was to study the effect of different seed pre-treatments on yield, fatty acids composition and sensory acceptability of chia oil at different storage intervals and conditions. Raw chia seeds were characterized for proximate composition. Raw chia seeds after milling were passed through sieves to obtain different particle size fractions (coarse, seed particle size ≥ 10 mm; medium, seed particle size ≥ 5 mm; fine, seed particle size ≤ 5 mm). Heat pre-treatment of chia seeds included the water boiling (100 C°, 5 min), microwave roasting (900 W, 2450 MHz, 2.5 min), oven drying (105 ± 5 °C, 1 h) and autoclaving (121 °C, 15 lbs, 15 min) process. Extracted oil from pre-treated chia seeds were stored in Tin cans at 25 ± 2 °C and 4 ± 1 °C for 60-days and examined for physical (color, melting point, refractive index), oxidative (iodine value, peroxide value, free fatty acids), fatty acids (palmitic, stearic, oleic, linoleic, α-linolenic) composition and sensory (appearance, flavor, overall acceptability) parameters, respectively. The proximal composition of chia seeds consisted of 6.16 ± 0.24 % moisture, 34.84 ± 0.62 % oil, 18.21 ± 0.45 % protein, 4.16 ± 0.37 % ash, 23.12 ± 0.29 % fiber, and 14.18 ± 0.23 % nitrogen contents. The oil yield as a result of seed pre-treatments was found in the range of 3.43 ± 0.22 % (water boiled samples) to 32.18 ± 0.34 % (autoclaved samples). The oil samples at day 0 indicated the

  10. Characterization of interfacial socket pressure in transhumeral prostheses: A case series.

    Science.gov (United States)

    Schofield, Jonathon S; Schoepp, Katherine R; Williams, Heather E; Carey, Jason P; Marasco, Paul D; Hebert, Jacqueline S

    2017-01-01

    One of the most important factors in successful upper limb prostheses is the socket design. Sockets must be individually fabricated to arrive at a geometry that suits the user's morphology and appropriately distributes the pressures associated with prosthetic use across the residual limb. In higher levels of amputation, such as transhumeral, this challenge is amplified as prosthetic weight and the physical demands placed on the residual limb are heightened. Yet, in the upper limb, socket fabrication is largely driven by heuristic practices. An analytical understanding of the interactions between the socket and residual limb is absent in literature. This work describes techniques, adapted from lower limb prosthetic research, to empirically characterize the pressure distribution occurring between the residual limb and well-fit transhumeral prosthetic sockets. A case series analyzing the result of four participants with transhumeral amputation is presented. A Tekscan VersaTek pressure measurement system and FaroArm Edge coordinate measurement machine were employed to capture socket-residual limb interface pressures and geometrically register these values to the anatomy of participants. Participants performed two static poses with their prosthesis under two separate loading conditions. Surface pressure maps were constructed from the data, highlighting pressure distribution patterns, anatomical locations bearing maximum pressure, and the relative pressure magnitudes. Pressure distribution patterns demonstrated unique characteristics across the four participants that could be traced to individual socket design considerations. This work presents a technique that implements commercially available tools to quantitatively characterize upper limb socket-residual limb interactions. This is a fundamental first step toward improved socket designs developed through informed, analytically-based design tools.

  11. Characterization of interfacial socket pressure in transhumeral prostheses: A case series.

    Directory of Open Access Journals (Sweden)

    Jonathon S Schofield

    Full Text Available One of the most important factors in successful upper limb prostheses is the socket design. Sockets must be individually fabricated to arrive at a geometry that suits the user's morphology and appropriately distributes the pressures associated with prosthetic use across the residual limb. In higher levels of amputation, such as transhumeral, this challenge is amplified as prosthetic weight and the physical demands placed on the residual limb are heightened. Yet, in the upper limb, socket fabrication is largely driven by heuristic practices. An analytical understanding of the interactions between the socket and residual limb is absent in literature. This work describes techniques, adapted from lower limb prosthetic research, to empirically characterize the pressure distribution occurring between the residual limb and well-fit transhumeral prosthetic sockets. A case series analyzing the result of four participants with transhumeral amputation is presented. A Tekscan VersaTek pressure measurement system and FaroArm Edge coordinate measurement machine were employed to capture socket-residual limb interface pressures and geometrically register these values to the anatomy of participants. Participants performed two static poses with their prosthesis under two separate loading conditions. Surface pressure maps were constructed from the data, highlighting pressure distribution patterns, anatomical locations bearing maximum pressure, and the relative pressure magnitudes. Pressure distribution patterns demonstrated unique characteristics across the four participants that could be traced to individual socket design considerations. This work presents a technique that implements commercially available tools to quantitatively characterize upper limb socket-residual limb interactions. This is a fundamental first step toward improved socket designs developed through informed, analytically-based design tools.

  12. [A clinical study of gelatamp colloidal silver gelatin sponge on preventing the complication of teeth extraction].

    Science.gov (United States)

    Cai, Yong-hai; Lu, Chang-shou

    2008-10-01

    To study the clinical effect of Gelatamp colloidal silver gelatin sponge on preventing the complication of teeth extraction. 672 teeth were divided into experimental group and control group semi-randomly. All teeth were extracted after local anesthesia and sockets were cleaned. Gelatamp colloidal silver gelatin sponge was implanted into socket in experimental group and nothing was implanted into alveolar socket in control group. The complication of teeth extraction was observed on 0.5 h, 2 d and 7 d after extraction. The incidence rate of complication was calculated. The incidence rate of complication of teeth extraction in experimental group was 7.72%, which was lower than that of control group (24.43%). There was significant difference in the incidence rates of complication between experimental group and control group (P colloidal silver gelatin sponge can prevent the occurrence of complication of teeth extraction, this can be used in clinic.

  13. Characterization of residues from thermal treatment of treated wood and extraction of Cu, Cr, As and Zn

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Pedersen, Anne Juul; Christensen, Iben Vernegren

    2005-01-01

    , that the charcoal contained a high concentration of Zn, probably from paint. Chemical extraction experiments in HNO were conducted with the charcoal and it was found that the order of extraction (in percentage) was Zn > Cu > As > Cr. A SEM/EDX investigation of the mixed ash from combustion showed the presence...... a matter to cope with when methods to avoid As emission are implemented: the residues with increased concentrations of Cu, Cr and As. In the present paper two different residues after thermal treatment are characterized: a mixed bottom and fly ash from combustion of CCA impregnated wood, and a charcoal...... form in a small layer on the surface of some matrix particles indicating condensation of volatile Cu species. Chemical extraction with inorganic acids showed the order of percentages mobilized as: As > Cu > Cr....

  14. Histomorphological changes in induced benign prostatic hyperplasia with exogenous testosterone and estradiol in adult male rats treated with aqueous ethanol extract of Secamone afzelii

    Directory of Open Access Journals (Sweden)

    Godwin Mbaka

    2017-03-01

    Full Text Available Secamone afzelii (S. afzelii used locally to manage benign prostatic hyperplasia (BPH was used to treat exogenously induced BPH in adult male Wister rats. Male rats weighing 200 ± 10 g kg−1 had exogenous administration of testosterone and estradiol in staggered doses (three times weekly for three weeks. The induced animals were in five groups (6 rats per group. Groups 1 and 2 received extract at 200 and 400 mg kg−1 body weight (bwt by gavages for thirty days; group 3, finasteride (0.1 mg kg−1; group 4, untreated for thirty days; group 5, negative control, which was sacrificed twenty-one days after induction. Group 6 received extract (400 mg kg−1 and steroid hormones simultaneously; group 7, normal control. The extract caused marked decrease in prostate weight of BPH induced rats with the photomicrograph of the prostate showing extensive shrinkage of glandular tissue whereas glandular hyperplasia occurred in the negative control. Prostate specific antigen (PSA level significantly (p < 0.05 decreased in the treated groups compared to negative control. Treatment with the extract/finasteride caused significant decrease in testosterone to a level comparable to normal. The BPH induced rats treated with S. afzelii/finasteride recorded marked increase in the levels of antioxidant enzymes compared to the negative control. S. afzelii effectively ameliorated prostatic hyperplasia exogenously induced by causing extensive shrinkage of glands and stroma. It also exhibited antioxidant properties and showed to be a good prophylaxis.

  15. An Individualized 3-Dimensional Designed and Printed Conformer After Dermis Fat Grafting for Complex Sockets.

    Science.gov (United States)

    Mourits, Daphne L; Remmers, Jelmer S; Tan, Stevie H; Moll, Annette C; Hartong, Dyonne T

    2018-04-03

    To introduce a novel technique to design individually customized conformers for postenucleation sockets with dermis fat implants. We use a 3-dimensional scan of the frontal face/orbit and eyelid contour to design an individualized conformer. This polymethylmetacrylate printed conformer is adapted to patients' socket, palpebral fissures, horizontal eyelid aperture, curvature of the eyelids, and mean diameter of patients' contralateral eye. Sutures through holes in the inferior part of the conformer and in the extension can be placed to fixate the conformer and anchor fornix deepening sutures. A correct fitting conformer can be printed and attached to the socket and eyelids. The shape of this conformer can be used subsequently postsurgically to design the ocular prosthesis. Presurgical planning is important to anticipate for a functional socket to adequately fit an artificial eye. The presented technique using 3-dimensional imaging, designing, and printing promises to prevent conformer extrusion and forniceal shortening.

  16. Management of an irradiated anophthalmic socket following dermis-fat graft rejection: A case report

    Directory of Open Access Journals (Sweden)

    Raizada Kuldeep

    2008-01-01

    Full Text Available Dermis-fat graft (DFG is often the only promising option in cases of severely contracted sockets. However, there is an increased risk of graft failure in irradiated sockets with decreased vascularity. In such difficult cases, repeat DFG implantation also has higher risks of graft failure. We describe an ingenious method of successful management of an irradiated anophthalmic socket following DFG infection and necrosis, with acceptable cosmetic results. At surgery, an orbital impression was taken with ophthalmic grade alginate. Based on this measurement, a custom-made stem pressure socket-expander made up of high density polymethyl methacrylate (PMMA was fitted, a week post surgery and kept in situ for six weeks. On review, the fornices had considerably deepened. The expander device was removed and the patient was now fitted with a custom-made thicker prosthesis made up of high-density PMMA. The patient has followed up for a year subsequently and the prosthesis has remained stable.

  17. Continuation of down-hole geophysical testing for rock sockets : [technical summary].

    Science.gov (United States)

    2013-11-01

    The rock socket is critical to a drilled shaft : foundation because it lies within a rock stratum : and accounts for much of the capacity of the : foundational unit. Consistency of the rocks : structure and composition must be identifed : because ...

  18. Development of a socketed foundation for the Midwest Weak Post (MWP) v1.

    Science.gov (United States)

    2014-07-01

    A socketed foundation was designed and evaluated for use with the Midwest Weak Post (MWP), Version 1. : Dynamic component testing was conducted on five different design configurations with varying embedment : depths, steel reinforcement, and soil con...

  19. Denaturation and in Vitro Gastric Digestion of Heat-Treated Quinoa Protein Isolates Obtained at Various Extraction pH

    NARCIS (Netherlands)

    Ruiz, Geraldine Avila; Opazo-Navarrete, Mauricio; Meurs, Marlon; Minor, Marcel; Sala, Guido; Boekel, van Tiny; Stieger, Markus; Janssen, Anja E.M.

    2016-01-01

    The aim of this study was to determine the influence of heat processing on denaturation and digestibility properties of protein isolates obtained from sweet quinoa (Chenopodium quinoa Willd) at various extraction pH values (8, 9, 10 and 11). Pretreatment of suspensions of protein isolates at 60,

  20. Report of a Class I bimaxillary dental protrusion case with extraction of first premolars treated with Clarity™ SL MBT appliances

    Directory of Open Access Journals (Sweden)

    Hugo Trevisi

    2013-01-01

    Full Text Available Bimaxillary protrusion cases are common in orthodontic practice. For the best facial outcome, the biomechanics can often be challenging. A class I bimaxillary protrusion case is presented below illustrating the careful application of extractions and bracket prescription. The case highlights how self-ligating brackets and high precision bracket positioning can reduce the need for additional anchorage.

  1. Placement of single tooth implant in healed socket with immediate temporization: Clinical study

    Directory of Open Access Journals (Sweden)

    Jeevan Lata

    2012-01-01

    Full Text Available Introduction: Edentulous condition inadequately compensated for, by dentures, impair oral function and is accompanied by reduced self–confidence. In a continued effort to achieve these goals, implant dentistry was introduced. Immediate temporization is somehow a recent concept, which allows the maintenance of soft tissue contours, along with interdental alveolar contours. Aims and Obectives: Aims of the present study were to study the placement of implant in the post-extracted healed tooth socket of anterior maxilla and to evaluate the feasibility of early function on implants placed. Materials and Methods: In the present study, HI-TECH IMPLANTS TRX-OP one-piece immediate loading implant system with the built on abutment has been used.Immediate temporisation has been done and results have been evaluated in terms of stability, gingival health, esthetics, marginal bone loss, patient′s psychological attitude, and satisfaction.
Results: Out of eight implants, 6 successfully healed whereas 2 implants suffered failure
Conclusion: Overall conclusion drawn from the study is, immediate temporization is a successful method providing psychological, financial and emotional benefits to the patient.

  2. Application of coenzyme Q10 for accelerating soft tissue wound healing after tooth extraction in rats.

    Science.gov (United States)

    Yoneda, Toshiki; Tomofuji, Takaaki; Kawabata, Yuya; Ekuni, Daisuke; Azuma, Tetsuji; Kataoka, Kota; Kunitomo, Muneyoshi; Morita, Manabu

    2014-12-10

    Accelerating wound healing after tooth extraction is beneficial in dental treatment. Application of antioxidants, such as reduced coenzyme Q10 (rCoQ10), may promote wound healing after tooth extraction. In this study, we examined the effects of topical application of rCoQ10 on wound healing after tooth extraction in rats. After maxillary first molars were extracted, male Fischer 344 rats (8 weeks old) (n = 27) received topical application of ointment containing 5% rCoQ10 (experimental group) or control ointment (control group) to the sockets for 3 or 8 days (n = 6-7/group). At 3 days after extraction, the experimental group showed higher collagen density and lower numbers of polymorphonuclear leukocytes in the upper part of socket, as compared to the control group (p healing in the soft tissue of the alveolar socket, but that rCoQ10 has a limited effect on bone remodeling in rats.

  3. Effects of low-level laser therapy on orthodontic tooth movement and root resorption after artificial socket preservation.

    Science.gov (United States)

    Seifi, Massoud; Atri, Faezeh; Yazdani, Mohammad Masoud

    2014-01-01

    Low- level laser therapy has been used to stimulate the orthodontic tooth movements (OTM) previously. Furthermore, in the orthodontic treatments accompanying tooth extractions, the adjacent teeth move towards the extraction sites and close the space in some cases. Then, the adjacent tooth movements must be prevented in the treatments requiring space. Laser stimulates and at some doses decelerates tooth movement; it also improves healing process and enhances osteogenesis. Hence, it can prevent movement by osteogenesis adjacent to the tooth. The present study investigated the effects of low-level laser therapy on the OTM and root resorption following artificial socket preservation. In this experimental animal trial, 16 male albino rabbits were selected with similar characteristics and randomly divided in two groups. Under general anesthesia, an artificial socket, 8 mm in height, was created in the mesial aspect of the first premolars of the rabbits and filled with demineralized freeze dried bone allograft (DFDBA). The first premolars were connected to the incisors using nickel titanium coil springs. In experimental group, gallium-aluminum-arsenide (GaAlAs) laser was irritated mesial to first premolar where artificial socket was created continuously (808 nm). The cycle was 10 days irritation, 14 days rest, 10 days irritation, 14 days rest (Biostimulation mode). Control group was not laser irradiated. All animals were sacrificed after 48 days and the distance between the distal aspect of the first premolars, and the mesial surface of the second premolars was measured with leaf gauge. The specimens underwent histological assessments. Integrity of root and its resorption was observed under microscope calibration. The size of resorption lacunae was calculated in mm(2). Normality of data was proved according to Kolmogorov-Smirnov analysis, and Student's t-test was done. P value less than 0.05 was considered as significant. The mean OTM were 5.68 ± 1.21 mm in the control

  4. Prosthetic Smart Socket Technology to Improve Patient Interaction, Usability, Comfort, Fit and Function

    Science.gov (United States)

    2017-10-01

    impact on society beyond science and technology ? Nothing to report at this time. 5. CHANGES/PROBLEMS: Changes in approach and reasons for...AWARD NUMBER: W81XWH-16-1-0785 TITLE: Prosthetic Smart Socket Technology to Improve Patient Interaction, Usability, Comfort, Fit and Function...2016 - 29 Sep 2017 4. TITLE AND SUBTITLE Prosthetic Smart Socket Technology to Improve Patient Interaction, Usability, Comfort, Fit and Function 5a

  5. Inhibition of lipid oxidation in foods and feeds and hydroxyl radical-treated fish erythrocytes: A comparative study of Ginkgo biloba leaves extracts and synthetic antioxidants

    Directory of Open Access Journals (Sweden)

    Huatao Li

    2016-09-01

    Full Text Available This study explored the effects of butylated hydroxytoluene (BHT and ethoxyquin (EQ and ethyl ether extracts, ethyl acetate extracts (EAE, acetone extracts, ethanol extracts and aqueous extracts of Ginkgo biloba leaves (EGbs on lipid oxidation in a linoleic acid emulsion, fish flesh and fish feed and in hydroxyl radical (·OH-treated carp erythrocytes. The linoleic acid, fish flesh and fish feed were incubated with BHT, EQ and EGbs at 45°C for 8 d, respectively, except for the control group. The lipid oxidation in the linoleic acid emulsion, fish flesh and fish feed was then measured by the ferric thiocyanate method or thiobarbituric acid method. The carp erythrocytes were treated with BHT, EQ or EGbs in the presence of 40 μmol/L FeSO4 and 20 μmol/L H2O2 at 37°C for 6 h, except for the control group. Oxidative stress and apoptosis parameters in carp erythrocytes were then evaluated by the commercial kit. The results showed that BHT, EQ and EGbs inhibited lipid oxidation in the linoleic acid emulsion, fish flesh and fish feed and ·OH-induced phosphatidylserine exposure and DNA fragmentation (the biomarkers of apoptosis in carp erythrocytes. Furthermore, BHT, EQ and EGbs decreased the generation of reactive oxygen species (ROS, inhibited the oxidation of cellular components and restored the activities of enzymatic antioxidants in ·OH-treated carp erythrocytes. Of all examined EGbs, EAE showed the strongest effects. The effects of EAE on lipid oxidation in the linoleic acid emulsion and on superoxide anion and malonaldehyde levels, catalase activity and apoptosis in ·OH-treated carp erythrocytes were equivalent to or stronger than those of BHT. Moreover, these results indicated that the inhibition order of EGbs on the generation of ROS and oxidation of cellular components in fish erythrocytes approximately agreed with that for the food and feed materials tested above. And, the antioxidative and anti-apoptotic effects of EGbs were

  6. Anion Gap Toxicity in Alloxan Induced Type 2 Diabetic Rats Treated with Antidiabetic Noncytotoxic Bioactive Compounds of Ethanolic Extract of Moringa oleifera

    Directory of Open Access Journals (Sweden)

    Maxwell Omabe

    2014-01-01

    Full Text Available Moringa oleifera (MO is used for a number of therapeutic purposes. This raises the question of safety and possible toxicity. The objective of the study was to ascertain the safety and possible metabolic toxicity in comparison with metformin, a known drug associated with acidosis. Animals confirmed with diabetes were grouped into 2 groups. The control group only received oral dose of PBS while the test group was treated with ethanolic extract of MO orally twice daily for 5-6 days. Data showed that the extract significantly lowered glucose level to normal values and did not cause any significant cytotoxicity compared to the control group (P=0.0698; there was no gain in weight between the MO treated and the control groups (P>0.8115. However, data showed that treatment with an ethanolic extract of MO caused a decrease in bicarbonate (P<0.0001, and more than twofold increase in anion gap (P<0.0001; metformin treatment also decreased bicarbonate (P<0.0001 and resulted in a threefold increase in anion gap (P<0.0001. Conclusively, these data show that while MO appears to have antidiabetic and noncytotoxic properties, it is associated with statistically significant anion gap acidosis in alloxan induced type 2 diabetic rats.

  7. Production of citric acid using its extraction wastewater treated by anaerobic digestion and ion exchange in an integrated citric acid-methane fermentation process.

    Science.gov (United States)

    Xu, Jian; Chen, Yang-Qiu; Zhang, Hong-Jian; Tang, Lei; Wang, Ke; Zhang, Jian-Hua; Chen, Xu-Sheng; Mao, Zhong-Gui

    2014-08-01

    In order to solve the problem of extraction wastewater pollution in citric acid industry, an integrated citric acid-methane fermentation process is proposed in this study. Extraction wastewater was treated by mesophilic anaerobic digestion and then used to make mash for the next batch of citric acid fermentation. The recycling process was done for seven batches. Citric acid production (82.4 g/L on average) decreased by 34.1 % in the recycling batches (2nd-7th) compared with the first batch. And the residual reducing sugar exceeded 40 g/L on average in the recycling batches. Pigment substances, acetic acid, ammonium, and metal ions in anaerobic digestion effluent (ADE) were considered to be the inhibitors, and their effects on the fermentation were studied. Results indicated that ammonium, Na(+) and K(+) in the ADE significantly inhibited citric acid fermentation. Therefore, the ADE was treated by acidic cation exchange resin prior to reuse to make mash for citric acid fermentation. The recycling process was performed for ten batches, and citric acid productions in the recycling batches were 126.6 g/L on average, increasing by 1.7 % compared with the first batch. This process could eliminate extraction wastewater discharge and reduce water resource consumption.

  8. Effect of Saccharomyces Boulardii Cell Wall Extracts on Colon Cancer Prevention in Male F344 Rats Treated with 1,2-Dimethylhydrazine.

    Science.gov (United States)

    Fortin, Olivier; Aguilar-Uscanga, Blanca R; Vu, Khanh D; Salmieri, Stephane; Lacroix, Monique

    2018-01-01

    The effect of Saccharomyces boulardii cell wall extracts on colon cancer prevention in rats treated with 1,2-dimethylhydrazine was investigated. A crude insoluble glucan (0.5 and 1.0 mg/kg/day) and a crude mannoprotein extract (0.3 and 3.0 mg/kg/day) were administered in rats by gavage for 12 weeks along with a high fat low fiber diet whereupon rats were sacrificed and aberrant crypt foci (ACF) were counted in the colon. Moreover, NAD(P)H: quinone reductase (QR) and harmful fecal enzymes (β-glucosidase and β-glucuronidase) were quantified in the liver and in the caecum, respectively. Results showed a reduction in ACF counts, a decreased β-glucuronidase activity and an increased QR activity when rats were treated only with insoluble glucan. While these enzymatic modulations may be constituted one of the mechanisms that is responsible for the reduction of ACF counts observed, the reduction of ACF counts caused by insoluble glucan should be addressed, at least, as a biomarker of their cancer-prevention properties. To our knowledge, this is the first study demonstrated that crude cell wall extract obtained from S. boulardii could have a potential role in colon cancer prevention in vivo by revealing the potential implication of QR and β-glucuronidase modulation.

  9. Histomorphological and morphometric studies of the pancreatic islet cells of diabetic rats treated with aqueous extracts of Momordica charantia (karela fruits

    Directory of Open Access Journals (Sweden)

    Mohammad Aftab Hossain

    2014-09-01

    Full Text Available Objective: To investigate the effect of aqueous extract of Momordica charantia (karela (M. charantia fruits on blood glucose level, pancreatic weight changes and histopathology of pancreatic changes in the streptozotocin (STZ induced diabetic rats. Methods: Thirty-six albino rats were used in the experiment; diabetes mellitus was induced in 30 adult albino rats, using intraperitoneal injection of 55 mg/kg STZ. Six non diabetic rats remained as control (T1 . The diabetic rats were randomly assigned into five equal groups: diabetic control (T2 without any treatment, groups T3, T4, T5 and T6 were treated with aqueous extract of karela fruits daily at a doses of 250, 500 and 750 mg/kg and glibenclamide (5 mg/kg up to 90 d, respectively. At Day 90, all rats were sacrificed, the pancreases of the rats were excised and processed. Results: The results of this study indicate that aqueous extract of M. charantia fruits was able to reduce blood glucose level significantly compared with the diabetic control group (P<0.01. Histopathologically, STZ resulted severe necrotic changes in pancreatic islets. Tissues sections of pancreas in the treated groups showed regeneration of β cells and increased size of pancreatic islets. Conclusions: The present study suggests that oral feeding of M. charantia fruit juice has a significant anti-hyperglycemic effect and may have a role in the regeneration of the β cells in STZ diabetic rats.

  10. Features of the postirradiation regeneration of liver mitochondria of gamma-irradiated mice treated with the Testudo horsfieldi spleen extract

    Energy Technology Data Exchange (ETDEWEB)

    Turdyev, A.A.; Ivanov, V.I.; Trifonov, Yu.A.; Abbasova, I.A.; Usmanov, R.B.

    A study was made of the effect of a drug prepared from a spleen extract of Testudo horsfieldi on energy metabolism and lipid composition of liver mitochondria of irradiated mice (2.06 x 10/sup -1/ C/kg). It was shown that the decompensated low-energy state of liver mitochondria of the exposed mice was changed into the state of the compensated low-energy shift: the physicochemical properties of lipid microenvironment of mitochondria proteins were partially restored.

  11. Oxidative Stress and Modulatory effects of the root extract of Phlogacanthus tubiflorus on the activity of Glutathione-S-Transferase in Hydrogen Peroxide treated Lymphocyte

    Directory of Open Access Journals (Sweden)

    Ramteke A

    2012-04-01

    Full Text Available Glutathione-S-transferase is one of the important enzyme systems that plays vital role in decomposition of lipid hydro-peroxides formed due to oxidative stress. In the present study GST activity increased in the lymphocytes treated with increasing concentration of H2O2, and decrease in the levels of GSH was observed. For similar treatment conditions LDH activity and MDA levels increased significantly leading to decrease in the cell viability. Treatment of lymphocytes with the root extract of Phlogacanthus tubiflorus (PTE resulted in dose dependent decline in the GST activity and rise in GSH levels. LDH activity and MDA levels also declined that led to the increase of cell viability. Lymphocytes pre-treated with the PTE followed by H2O2 (0.1 and 1% treatment, decline in the activity of GST and increase in GSH levels was observed. Also we have observed decline in the activity of LDH and MDA levels in the lymphocytes for both 0.1 and 1% of H2O2 though the magnitude of change was higher in the lymphocytes pre-treated with the PTE followed with 1% of H2O2 treatment. Significant increase in the cell viability for similar conditions was also observed. These findings suggest protective function of the root extracts might be through modulation of GST activity and levels of GSH and might find application in Chemomodulation in future.

  12. Trace metals content (contaminants) as initial indicator in the quality of heat treated palm oil whole extract

    Energy Technology Data Exchange (ETDEWEB)

    Mohd Fauzi, Noor Akhmazillah bt [Chemical and Bioprocess Department, Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor (Malaysia); Sarmidi, Mohd Roji [Chemical Engineering Pilot Plant, Faculty of Chemical and Natural Resources Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor (Malaysia)

    2011-07-01

    An investigation was carried out on the effect of different sterilization time on the trace metals concentration of palm oil whole extract. Palm fruits were collected, cleaned and sterilized for 0, 20, 40 and 60 minutes. The kernels were then stripped from the sterilized fruits to get the pulp and later the pulp was pressed using small scale expeller. The resulting puree was centrifuge at 4000 rpm for 20 minutes. The palm oil whole extract were then collected and trace metals analysis was conducted using Inductively Couple Plasma-Mass Spectrometry (ICP-MS). The result showed that the highest yield was obtained at 40 minutes of sterilization with 19.9 {+-} 0.21 % (w/w). There was no significant different (p < 0.5) in total trace metals content between the degrees of the heat treatment. Na+ was found as the highest trace metals content in the extract with mean concentration ranging from 1.05 {+-} 0.03 ppm to 2.36 {+-} 0.01 ppm. 40 minutes of heating time was predicted to have good oil quality due to higher content in trace metals that inhibit the lipase enzyme activity.

  13. Arsenic extractability and uptake by velvetgrass Holcus lanatus and ryegrass Lolium perenne in variously treated soils polluted by tailing spills.

    Science.gov (United States)

    Karczewska, Anna; Lewińska, Karolina; Gałka, Bernard

    2013-11-15

    Phytostabilization should be considered as an appropriate phytoremediation technique to restore the area affected by tailing spills in Zloty Stok, where arsenic ores were mined and processed for several centuries. The study aimed to compare the suitability of velvetgrass (Holcus lanatus L.) and ryegrass (Lolium perenne L.) for development of plant cover in that area. Various treatments commonly applied to support phytostabilization were examined. A pot experiment was carried out to assess the effects of soil amendment with phosphate (P), sewage sludge (SS) and iron salts (Fe) on arsenic extractability and its uptake by grass. Four kinds of soil material, containing 356-5350 mg kg(-1) As, were examined. Velvetgrass proved to be more resistant than ryegrass to the toxicity of soil arsenic. Ammonium sulphate extractability of As in soils correlated well with As concentrations in the biomass of both grass species. In three of four tested soils, application of Fe failed to decrease As extractability and to reduce its concentrations in the aboveground parts of grasses. Application of P and SS resulted in increased As solubility in soils, but their effects on plant biomass and As uptake were ambiguous. SS had a strong beneficial influence on the growth of velvetgrass, while such an effect was not observed for ryegrass. Copyright © 2012 Elsevier B.V. All rights reserved.

  14. Experimental study of reinforced concrete pile caps with external, embedded and partially embedded socket with smooth interface

    Directory of Open Access Journals (Sweden)

    R. Barros

    Full Text Available On Precast concrete structures the column foundation connections can occur through the socket foundation, which can be embedded, partially embedded or external, with socket walls over the pile caps. This paper presents an experimental study about two pile caps reinforced concrete with external, partially embedded and embedded socket submitted to central load, using 1:2 scaled models. In the analyzed models, the smooth interface between the socket walls and column was considered. The results are compared to a reference model that presents monolithic connections between the column and pile cap. It is observed that the ultimate load of pile cap with external sockets has the same magnitude as the reference pile cap, but the ultimate load of models with partially embedded and embedded socket present less magnitude than the reference model.

  15. Clinical Efficacy and Safety of Benjakul Remedy Extract for Treating Primary Osteoarthritis of Knee Compared with Diclofenac: Double Blind, Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    Patamaporn Rachawat

    2017-01-01

    Full Text Available Background. The purpose of this study was to investigate the clinical efficacy and safety of Benjakul (BJK extract for treating primary osteoarthritis (OA of the knee compared with diclofenac. Methods. A phase 2, double blind, randomized, and controlled study was conducted. The BJK group received 300 mg of BJK extract per day, while another group received 75 mg of diclofenac per day. All patients were followed up at 14 and 28 days. The changing of visual analogue scale (VAS for pain, 100-meter walking times, the modified Thai WOMAC index scores, and the global assessment were evaluated for efficacy. For safety issue, clinical signs and symptoms, complete physical examination, and renal and liver function were evaluated. Results. 39 and 38 patients for BJK extract group and diclofenac group were evaluated. For efficacy, all patients from both groups reported a decrease in the VAS pain score and 100-meter walking times but only the diclofenac group showed significant reduction of both measurements when compared with day 0. The modified Thai WOMAC scores of both groups were significantly reduced from baseline. However, all efficacy outcomes were not significantly different for both groups. For safety outcomes, the patients from both groups had no severe adverse events reported and only BJK had no toxicity in renal and liver functions. Conclusions. The BJK remedy extract showed equal clinical efficacy in relieving symptoms of OA knee when compared with diclofenac.

  16. Cleaner production of citric acid by recycling its extraction wastewater treated with anaerobic digestion and electrodialysis in an integrated citric acid-methane production process.

    Science.gov (United States)

    Xu, Jian; Su, Xian-Feng; Bao, Jia-Wei; Chen, Yang-Qiu; Zhang, Hong-Jian; Tang, Lei; Wang, Ke; Zhang, Jian-Hua; Chen, Xu-Sheng; Mao, Zhong-Gui

    2015-01-01

    To solve the pollution problem of extraction wastewater in citric acid production, an integrated citric acid-methane production process was proposed. Extraction wastewater was treated through anaerobic digestion and the anaerobic digestion effluent (ADE) was recycled for the next batch of citric acid fermentation, thus eliminating wastewater discharge and reducing water consumption. Excessive Na(+) contained in ADE could significantly inhibit citric acid fermentation in recycling and was removed by electrodialysis in this paper. Electrodialysis performance was improved after pretreatment of ADE with air stripping and activated carbon adsorption to remove precipitable metal ions and pigments. Moreover, the concentrate water was recycled and mixed with feed to improve the water recovery rate above 95% in electrodialysis treatment, while the dilute water was collected for citric acid fermentation. The removal rate of Na(+) in ADE was above 95% and the citric acid production was even higher than that with tap water. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Perioperative antibiotic regimen in rats treated with pamidronate plus dexamethasone and subjected to dental extraction: a study of the changes in the jaws.

    Science.gov (United States)

    López-Jornet, Pía; Camacho-Alonso, Fabio; Martínez-Canovas, Ascensión; Molina-Miñano, Francisco; Gómez-García, Francisco; Vicente-Ortega, Vicente

    2011-10-01

    Osteonecrosis of the jaws is a well-known condition associated with long-term bisphosphonate use. This study analyzed the prophylactic effect of antibiotic treatment in Sprague-Dawley rats treated with pamidronate plus dexamethasone and subjected to oral surgery in the form of dental extraction. One hundred twenty animals were included in a randomized prospective study. Animals in group I (n = 60) were treated with dexamethasone 1 mg/kg and pamidronate 3 mg/kg 3 times per week for 7, 14, and 21 days. All were subjected to right mandibular or maxillary molar extraction 8, 15, and 22 days after the start of dosing. Animals in group II (n = 60) received the same treatment except for the addition of penicillin 0.1 mL/kg per day for 3 days before and 4 days after extraction. Rats in the 2 groups were sacrificed 14 and 28 days after extraction. A clinical and histologic evaluation was performed. In group I, osteonecrosis was documented in 18 cases (34.6%; affecting the upper and lower jaws in 10 and 8 cases, respectively). In group II, osteonecrosis was documented in 5 cases (9.61%; affecting the upper and lower jaws in 3 and 2 cases, respectively). The difference between the 2 groups was statistically significant (P = .002). The adoption of preventive measures (antibiotic prophylaxis) in invasive dental procedures results in a significant decrease in osteonecrosis of the jaws associated with bisphosphonate use. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  18. Techniques for Interface Stress Measurements within Prosthetic Sockets of Transtibial Amputees: A Review of the Past 50 Years of Research.

    Science.gov (United States)

    Al-Fakih, Ebrahim A; Abu Osman, Noor Azuan; Mahmad Adikan, Faisal Rafiq

    2016-07-20

    The distribution of interface stresses between the residual limb and prosthetic socket of a transtibial amputee has been considered as a direct indicator of the socket quality fit and comfort. Therefore, researchers have been very interested in quantifying these interface stresses in order to evaluate the extent of any potential damage caused by the socket to the residual limb tissues. During the past 50 years a variety of measurement techniques have been employed in an effort to identify sites of excessive stresses which may lead to skin breakdown, compare stress distributions in various socket designs, and evaluate interface cushioning and suspension systems, among others. The outcomes of such measurement techniques have contributed to improving the design and fitting of transtibial sockets. This article aims to review the operating principles, advantages, and disadvantages of conventional and emerging techniques used for interface stress measurements inside transtibial sockets. It also reviews and discusses the evolution of different socket concepts and interface stress investigations conducted in the past five decades, providing valuable insights into the latest trends in socket designs and the crucial considerations for effective stress measurement tools that lead to a functional prosthetic socket.

  19. Attenuation of hyperglycemia and hyperlipidemia in high calorie fed/streptozotocin-treated rats by hydromethanolic extract of Padina tetrastromatica

    Directory of Open Access Journals (Sweden)

    Divya S. Mohan

    2014-03-01

    Full Text Available In the present study, the effect of defatted hydromethanolic extract of Padina tetrastromatica on carbohydrate metabolism and serum lipid profile were evaluated. Diabetes mellitus was induced in male Wistar rats by feeding high calorie/energy diet for two months followed by a single intraperitoneal injecttion of streptozotocin. Diabetic rats were administered with the extract intragastrically at doses of 150, 300, 450, and 600 mg/kg body weight daily for 45 days. Treatment with graded doses showed a dose dependent reduction in blood glucose and glycated hemoglobin levels. Treatment significantly increased the activity of hexokinase, glucose-6-phosphate dehydrogenase and glycogen content while there was significant reduction in the activity of glucose-6-phosphatase and fructose-1,6-bisphosphatase. Serum lipid profile was also brought back to near normal levels in a dose dependent manner. The present study clearly indicates the antihyperglycemic and hypolipidemic effects of P. tetrastromatica at an optimum dose of 450 mg/kg body weight.

  20. Evaluation of wound healing treated with latex derived from rubber trees and Aloe Vera extract in rats.

    Science.gov (United States)

    Brandão, Marcelo Luiz; Reis, Paulo Roberto Melo; Araújo, Lilhian Alves de; Araújo, Ana Carolina Vicente; Santos, Maisa Helena de Abreu Silva; Miguel, Marina Pacheco

    2016-09-01

    To compare the use of latex derivative and Aloe vera extract to wound healing. Twenty one rats were randomly divided into three groups and each one had a wound made by incision. The treatment consisted in: derivative of latex (GL), Aloe vera extract (GA) and saline solution (GC). The wound area was measured on the 7th, 14th and 21st days and macroscopic and microscopic evaluation were done. The comparison between the measurements of the wounds presented statistical difference in GC and GA from the 7th day of evaluation and GL from the 14th day. The extent of the wound was significantly smaller by the 7th day in GL. Histologically, in GL, the neovascularization was significant on the 7th, 14th and 21st days. On the 21st day the scar was large and little mature. In GA and GC, the findings were similar on the 7th, 14th and 21st days with a slight better organization of skin and collagen on the 21st in GA. Statistical analysis did not allow for the definition of the best topical agent. The latex had the highest angiogenesis, but a possible foreign body granuloma. Aloe vera has revealed a healing process adequated temporally in histology.

  1. Surface EMG and intra-socket force measurement to control a prosthetic device

    Science.gov (United States)

    Sanford, Joe; Patterson, Rita; Popa, Dan

    2015-06-01

    Surface electromyography (SEMG) has been shown to be a robust and reliable interaction method allowing for basic control of powered prosthetic devices. Research has shown a marked decrease in EMG-classification efficiency throughout activities of daily life due to socket shift and movement and fatigue as well as changes in degree of fit of the socket throughout the subject's lifetime. Users with the most severe levels of amputation require the most complex devices with the greatest number of degrees of freedom. Controlling complex dexterous devices with limited available inputs requires the addition of sensing and interaction modalities. However, the larger the amputation severity, the fewer viable SEMG sites are available as control inputs. Previous work reported the use of intra-socket pressure, as measured during wrist flexion and extension, and has shown that it is possible to control a powered prosthetic device with pressure sensors. In this paper, we present data correlations of SEMG data with intra-socket pressure data. Surface EMG sensors and force sensors were housed within a simulated prosthetic cuff fit to a healthy-limbed subject. EMG and intra-socket force data was collected from inside the cuff as a subject performed pre-defined grip motions with their dominant hand. Data fusion algorithms were explored and allowed a subject to use both intra-socket pressure and SEMG data as control inputs for a powered prosthetic device. This additional input modality allows for an improvement in input classification as well as information regarding socket fit through out activities of daily life.

  2. Three dimensional Burn-up program parallelization using socket programming

    International Nuclear Information System (INIS)

    Haliyati R, Evi; Su'ud, Zaki

    2002-01-01

    A computer parallelization process was built with a purpose to decrease execution time of a physics program. In this case, a multi computer system was built to be used to analyze burn-up process of a nuclear reactor. This multi computer system was design need using a protocol communication among sockets, i.e. TCP/IP. This system consists of computer as a server and the rest as clients. The server has a main control to all its clients. The server also divides the reactor core geometrically to in parts in accordance with the number of clients, each computer including the server has a task to conduct burn-up analysis of 1/n part of the total reactor core measure. This burn-up analysis was conducted simultaneously and in a parallel way by all computers, so a faster program execution time was achieved close to 1/n times that of one computer. Then an analysis was carried out and states that in order to calculate the density of atoms in a reactor of 91 cm x 91 cm x 116 cm, the usage of a parallel system of 2 computers has the highest efficiency

  3. Ultrasonic defect detection method for socket welding joint

    International Nuclear Information System (INIS)

    Tominaga, Masaaki; Matsuo, Toshiyuki; Ueno, Akihiro; Watanabe, Kunimichi; Kawamata, Kunio.

    1995-01-01

    The present invention provides a method of detecting defects over a wide range of a socket weld portion of various kinds of pipelines used, for example, in a nuclear power plant. Namely, an inclined probe is disposed to a jig for detecting defects by ultrasonic waves. This is rotated at least by one turn along the peripheral surface of the material to be detected such as weld tube joints. Defects of weld portion of the material can be detected automatically by using ultrasonic waves during the rotation. The inclined probe for detecting defects by ultrasonic waves comprises a transmission portion having a planar transmittance oscillator disposed to a wedge on the transmission side and a receiving portion comprising a planar receiving oscillator disposed to a wedge on the receiving side. With such a constitution, ultrasonic waves are emitted from the transmission portion to the defect detection portion in the welded portion. If a defect is present, defective echo is reflected to the receiving portion disposed ahead of the probe. Since the defective echo changes depending on the height of the detective portion, the estimation of the height of the defect can be facilitated. (I.S.)

  4. Biochemical studies of Piper betle L leaf extract on obese treated animal using 1H-NMR-based metabolomic approach of blood serum samples.

    Science.gov (United States)

    Abdul Ghani, Zuleen Delina Fasya; Husin, Juani Mazmin; Rashid, Ahmad Hazri Ab; Shaari, Khozirah; Chik, Zamri

    2016-12-24

    Piper betle L. (PB) belongs to the Piperaceae family. The presence of a fairly large quantity of diastase in the betel leaf is deemed to play an important role in starch digestion and calls for the study of weight loss activities and metabolite profile from PB leaf extracts using metabolomics approach to be performed. PB dried leaves were extracted with 70% ethanol and the extracts were subjected to five groups of rats fed with high fat (HF) and standard diet (SD). They were then fed with the extracts in two doses and compared with a negative control group given water only according to the study protocol. The body weights and food intakes were monitored every week. At the end of the study, blood serum of the experimental animal was analysed to determine the biochemical and metabolite changes. PB treated group demonstrated inhibition of body weight gain without showing an effect on the food intake. In serum bioassay, the PB treated group (HF/PB (100mg/kg and 500mg/kg) showed an increased in glucose and cholesterol levels compared to the Standard Diet (SD/WTR) group, a decrease in LDL level and increase in HDL level when compared with High Fat Diet (HF/WTR) group. For metabolite analysis, two separation models were made to determine the metabolite changes via group activities. The best separation of PCA serum in Model 1 and 2 was achieved in principle component 1 and principle component 2. SUS-Plot model showed that HF group was characterized by high-level of glucose, glycine and alanine. Increase in the β-hydroxybutyrate level similar with SD group animals was evident in the HF/PB(500mg/kg) group. This finding suggested that the administration of 500mg/kg PB extracts leads to increase in oxidation process in the body thus maintaining the body weight and without giving an effect on the appetite even though HF was continuously consumed by the animals until the end of the studies and also a reduction in food intake, thus maintaining their body weight although they

  5. Histometric study of alveolar bone healing in rats treated with the nonsteroidal anti-inflammatory drug nimesulide.

    Science.gov (United States)

    Teófilo, Juliana Mazzonetto; Giovanini, Gabriela Salgueiro; Fracon, Ricardo Nogueira; Lamano, Teresa

    2011-04-01

    There is extensive experimental and clinical evidence in the orthopedic area that prolonged use of nonselective (inhibitor of both cyclooxygenases 1 and 2) nonsteroidal anti-inflammatory drugs can hinder long bone fracture healing, spinal fusion rate, and new bone formation around implants. The purpose of the present study was to investigate whether nimesulide (Nimesulida, Medley S.A., Campinas, SP, Brazil), a preferential cyclooxygenase-2 inhibitor, can hinder alveolar bone healing, in rats. Treated rats received oral doses (5 mg/kg/rat/day) of nimesulide from the day of tooth extraction until euthanasia 2 weeks later and control rats received tap water (n = 5 per group). The volume of neoformed bone inside the alveolar socket was estimated in semiserial longitudinal histological sections by a differential point-counting method, and the significance of the difference between groups was analyzed by Student t test (P alveolar bone healing in rats.

  6. Antibiotics to prevent complications following tooth extractions.

    Science.gov (United States)

    Lodi, Giovanni; Figini, Lara; Sardella, Andrea; Carrassi, Antonio; Del Fabbro, Massimo; Furness, Susan

    2012-11-14

    the risk of dry socket by 38% (RR 0.62 (95% CI 0.41 to 0.95) P = 0.03, 1429 participants, moderate quality evidence) which means that 38 people (range 24-250) need to take antibiotics to prevent one case of dry socket following extraction of impacted wisdom teeth. There is also some evidence that patients who have prophylactic antibiotics may have less pain (MD -8.17 (95% CI -11.90 to -4.45) P antibiotics and placebo in the outcomes of fever (RR 0.34, 95% CI 0.06 to 1.99), swelling (RR 0.92, 95% CI 0.65 to 1.30) or trismus (RR 0.84, 95% CI 0.42 to 1.71) 7 days after tooth extraction.Antibiotics are associated with an increase in generally mild and transient adverse effects compared to placebo (RR 1.98 (95% CI 1.10 to 3.59) P = 0.02) which means that for every 21 people (range 8-200) who receive antibiotics, an adverse effect is likely. Although general dentists perform dental extractions because of severe dental caries or periodontal infection, there were no trials identified which evaluated the role of antibiotic prophylaxis in this group of patients in this setting. All of the trials included in this review included healthy patients undergoing extraction of impacted third molars, often performed by oral surgeons. There is evidence that prophylactic antibiotics reduce the risk of infection, dry socket and pain following third molar extraction and result in an increase in mild and transient adverse effects. It is unclear whether the evidence in this review is generalisable to those with concomitant illnesses or immunodeficiency, or those undergoing the extraction of teeth due to severe caries or periodontitis. However, patients at a higher risk of infection are more likely to benefit from prophylactic antibiotics, because infections in this group are likely to be more frequent, associated with complications and be more difficult to treat. Due to the increasing prevalence of bacteria which are resistant to treatment by currently available antibiotics, clinicians should

  7. Effect of treating alfalfa silage with pistachio by-products extract on Saanen dairy goats performance and microbial nitrogen synthesis.

    Science.gov (United States)

    Mokhtarpour, A; Naserian, A A; Pourmollae, F; Ghaffari, M H

    2016-08-01

    A lactation experiment was conducted to determine the influence of addition of pistachio by-products extract (PBE) to alfalfa silage (AS) on performance, rumen fermentation, milk yield and composition, and microbial nitrogen synthesis. Eight multiparous dairy goats (1.8 ± 0.25 kg of milk yield) were used in a replicated 4 × 4 Latin square design with a 2 × 2 factorial arrangement of treatments to compare two types of AS (supplemented with or without PBE) with two levels of dietary crude protein (14% vs. 16% CP). Dietary treatments were (i) AS with 14% CP of DM diet without PBE (14%CP-PBE), (ii) AS with 14% CP of DM diet with PBE (14%CP + PBE), (iii) AS with 16% CP of DM diet without PBE (16%CP-PBE) and (iv) AS with 16% CP of DM diet with PBE (16%CP + PBE). PBE was sprayed on fresh alfalfa at a ratio of 500 ml/kg alfalfa DM to get the final concentration of 1% tannin as tannic acid equivalent on DM basis. Intake of CP was greater (p pistachio by-products tannins. Journal of Animal Physiology and Animal Nutrition © 2015 Blackwell Verlag GmbH.

  8. Wood Colorization through Pressure Treating: The Potential of Extracted Colorants from Spalting Fungi as a Replacement for Woodworkers’ Aniline Dyes

    Directory of Open Access Journals (Sweden)

    Sara C. Robinson

    2014-07-01

    Full Text Available The extracellular colorants produced by Chlorociboria aeruginosa, Scytalidium cuboideum, and Scytalidium ganodermophthorum, three commonly utilized spalting fungi, were tested against a standard woodworker’s aniline dye to determine if the fungal colorants could be utilized in an effort to find a naturally occurring replacement for the synthetic dye. Fungal colorants were delivered in two methods within a pressure treater—the first through solubilization of extracted colorants in dichloromethane, and the second via liquid culture consisting of water, malt, and the actively growing fungus. Visual external evaluation of the wood test blocks showed complete surface coloration of all wood species with all colorants, with the exception of the green colorant (xylindein from C. aeruginosa in liquid culture, which did not produce a visible surface color change. The highest changes in external color came from noble fir, lodgepole pine, port orford cedar and sugar maple with aniline dye, cottonwood with the yellow colorant in liquid culture, lodgepole pine with the red colorant in liquid culture, red alder and Oregon maple with the green colorant in dichloromethane, and sugar maple and port orford cedar with the yellow colorant in dichloromethane. The aniline dye was superior to the fungal colorants in terms of internal coloration, although none of the tested compounds were able to completely visually color the inside of the test blocks.

  9. Radiographic evaluation of bone regeneration after the application of plasma rich in growth factors in a lower third molar socket: a case report

    Science.gov (United States)

    2009-01-01

    A 42-year-old Mediterranean male presented complaining of inability to sustain good oral care at the posterior aspect of the lower right jaw. The main problems were food impaction in the area and the subsequent malodor. The patient reported remarkable medical history. Clinical examination revealed local erytherma with noticeable bone defect distal to the second molar with obvious defect in the mesial wall of the third molar; the penetration depth was found to be up to 6 mm. Radiological evaluation confirmed the defect and it was attributed to the mesioangularly partially impacted lower third molar. It was decided that third molar should be extracted and concentrate of the patient's growth factors (PRGF) to be applied into the bony defect to stimulate bone regeneration and promote healing. The third molar tooth was, then, removed surgically and the PRGF, which was prepared preoperatively, was implanted in the socket. At the first postoperative day, moderate pain was the main complaint and was controlled by NSAIDs. One week postoperatively, the sutures were removed and there was good tissue healing on examination. On the fiftieth postoperative day, radiographic evaluation took place and showed noticeable enhancement of density and radio-opacity in the third molar socket area, in comparison with the baseline image. Further, clinical examination showed significant reduction of periodontal pocketing and evidence of new bone formation. In conclusion, PRGF was very successful in stimulating bone regeneration and promote healing following dental extraction. PMID:20062651

  10. Optimizing anterior esthetics of a single-tooth implant through socket augmentation and immediate provisionalization: A case report with 7-year follow-up

    Directory of Open Access Journals (Sweden)

    Po-Sung Fu

    2012-10-01

    Full Text Available Tooth extraction inevitably accompanies alveolar ridge resorption with loss of pre-existing tissue morphology. Replacing missing teeth with dental implants has become popular, but restoring anterior teeth with implant-supported restorations is a technique-sensitive task and poses challenges for dentists. With the progress of implant dentistry, the demand for optimal esthetics has become linked with the desire for faster, easier techniques that shorten treatment time and also satisfy patients. Immediate provisionalization of a single-tooth implant provides significant benefits compared with traditional delayed protocols, such as aiding the contouring of peri-implant soft tissue and enhancing patient comfort and satisfaction. This article describes a meticulous approach to a hopeless maxillary central incisor with root fracture. The defect in the extraction socket was reconstructed using autogenous bone harvested from the chin. Four months later, an implant was installed and immediately restored. After another healing period of 6 months, the peri-implant soft tissue had been shaped and matured according to the contours of the provisional restoration. The emergence profile was used to duplicate the definitive restoration. Peri-implant esthetics was achieved through socket augmentation and immediate provisionalization of the implant. This treatment modality attained predictable and maintainable outcomes, both functionally and esthetically.

  11. Bone implant sockets made using three different procedures: a stability study in dogs

    Science.gov (United States)

    Campo, Julián

    2012-01-01

    Objective: This study compared the effects of three different methods of preparing bone implant sockets (drilling, osteotomes, and piezoelectric device) on osseointegration using resonance frequency analysis (RFA). Study Design: An experimental prospective study was designed. Material and Methods: Ten adult beagle dogs were studied. After 5 weeks, 23 out of 28 initially placed implants in the iliac crest were evaluated, comparing these three different procedures of bone implant socket. Student’s t-test (paired, two-tailed) was used to reveal differences among the three groups at each time point (SPSS 16.0, IL, USA). Results: After a 5-week healing period, the implants placed in sockets that were made using an osteotome or piezoelectric device were slightly more stable than those made by drilling. Reduced mechanical and heat injury to the bone is beneficial for maintaining and improving stability during the critical early healing period. Conclusion: Using RFA, there was evidence of a slight increase in implant stability in the iliac crest after 5 weeks of healing when the implant socket was made using a piezoelectric device or expansion procedure as compare with the drilling method. Key words:Bone implant sockets, drilling, osteotomes, piezoelectric, resonance frequency analysis, stability. PMID:24558558

  12. Optimal conditions for cordycepin production in surface liquid-cultured Cordyceps militaris treated with porcine liver extracts for suppression of oral cancer.

    Science.gov (United States)

    Lin, Liang-Tzung; Lai, Ying-Jang; Wu, She-Ching; Hsu, Wei-Hsuan; Tai, Chen-Jei

    2018-01-01

    Cordycepin is one of the most crucial bioactive compounds produced by Cordyceps militaris and has exhibited antitumor activity in various cancers. However, industrial production of large amounts of cordycepin is difficult. The porcine liver is abundant in proteins, vitamins, and adenosine, and these ingredients may increase cordycepin production and bioconversion during C. militaris fermentation. We observed that porcine liver extracts increased cordycepin production. In addition, air supply (2 h/d) significantly increased the cordycepin level in surface liquid-cultured C. militaris after 14 days. Moreover, blue light light-emitting diode irradiation (16 h/d) increased cordycepin production. These findings indicated that these conditions are suitable for increasing cordycepin production. We used these conditions to obtain water extract from the mycelia of surface liquid-cultured C. militaris (WECM) and evaluated the anti-oral cancer activity of this extract in vitro and in vivo. The results revealed that WECM inhibited the cell viability of SCC-4 oral cancer cells and arrested the cell cycle in the G2/M phase. Oxidative stress and mitochondrial dysfunction (mitochondrial fission) were observed in SCC-4 cells treated with WECM for 12 hours. Furthermore, WECM reduced tumor formation in 7,12-dimethylbenz[a]anthracene-induced hamster buccal pouch carcinogenesis through the downregulation of proliferating cell nuclear antigen, vascular endothelial growth factor, and c-fos expression. The results indicated that porcine liver extracts irradiated with blue light light-emitting diode and supplied with air can be used as a suitable medium for the growth of mycelia and production of cordycepin, which can be used in the treatment of oral cancer. Copyright © 2017. Published by Elsevier B.V.

  13. Electrochemical Preparation of Polyaniline Nanowires with the Used Electrolyte Solution Treated with the Extraction Process and Their Electrochemical Performance

    Directory of Open Access Journals (Sweden)

    Ying Wu

    2018-02-01

    Full Text Available Electrochemical polymerization of aniline is one of the most promising methods to prepare polyaniline (PANI materials. However, during this process, the electrolyte solution must be replaced after electropolymerization of a certain time because of the generation and the accumulation of the by-products, which have significant effects on the morphology, purity and properties of PANI products. Treatment and recycling of the used electrolyte solution are worthwhile to study to reduce the high treatment cost of the used electrolyte solution containing aniline and its polymerization by-products. Here, the composition of the used electrolyte solution was separated and determined by high performance liquid chromatography coupled with diode array detection (HPLC-DAD in the range of ultraviolet and visible (UV-Vis light. The analysis results revealed that the used electrolyte solution consisted of aniline, p-hydroquinone (HQ, p-benzoquinone (BQ, co-oligomers of aniline and p-benzoquinone (CAB and acid. Then, n-octanol and 2-octanone were selected as extracts to remove HQ, BQ and CAB from the used electrolyte solution. Following that, the recycled electrolyte solution was prepared by adjusting the concentration of aniline and acid of the aqueous phase, and the electrochemical polymerization process was conducted. Finally, the obtained PANI was characterized by scanning electron microscope (SEM and electrochemical methods. The experimental results clearly demonstrate that the morphology and specific capacitance of PANI produced from the recycled electrolyte solution can be recovered completely. This research paves the way for reusing the used electrolyte solution for aniline electrochemical polymerization.

  14. Electrochemical Preparation of Polyaniline Nanowires with the Used Electrolyte Solution Treated with the Extraction Process and Their Electrochemical Performance.

    Science.gov (United States)

    Wu, Ying; Wang, Jixiao; Ou, Bin; Zhao, Song; Wang, Zhi; Wang, Shichang

    2018-02-12

    Electrochemical polymerization of aniline is one of the most promising methods to prepare polyaniline (PANI) materials. However, during this process, the electrolyte solution must be replaced after electropolymerization of a certain time because of the generation and the accumulation of the by-products, which have significant effects on the morphology, purity and properties of PANI products. Treatment and recycling of the used electrolyte solution are worthwhile to study to reduce the high treatment cost of the used electrolyte solution containing aniline and its polymerization by-products. Here, the composition of the used electrolyte solution was separated and determined by high performance liquid chromatography coupled with diode array detection (HPLC-DAD) in the range of ultraviolet and visible (UV-Vis) light. The analysis results revealed that the used electrolyte solution consisted of aniline, p-hydroquinone (HQ), p-benzoquinone (BQ), co-oligomers of aniline and p-benzoquinone (CAB) and acid. Then, n-octanol and 2-octanone were selected as extracts to remove HQ, BQ and CAB from the used electrolyte solution. Following that, the recycled electrolyte solution was prepared by adjusting the concentration of aniline and acid of the aqueous phase, and the electrochemical polymerization process was conducted. Finally, the obtained PANI was characterized by scanning electron microscope (SEM) and electrochemical methods. The experimental results clearly demonstrate that the morphology and specific capacitance of PANI produced from the recycled electrolyte solution can be recovered completely. This research paves the way for reusing the used electrolyte solution for aniline electrochemical polymerization.

  15. Increased glucose metabolism and alpha-glucosidase inhibition in Cordyceps militaris water extract-treated HepG2 cells

    Science.gov (United States)

    Kim, Dae Jung; Kang, Yun Hwan; Kim, Kyoung Kon; Kim, Tae Woo; Park, Jae Bong

    2017-01-01

    BACKGROUND/OBJECTIVES Recent living condition improvements, changes in dietary habits, and reductions in physical activity are contributing to an increase in metabolic syndrome symptoms including diabetes and obesity. Through such societal developments, humankind is continuously exposed to metabolic diseases such as diabetes, and the number of the victims is increasing. This study investigated Cordyceps militaris water extract (CMW)-induced glucose uptake in HepG2 cells and the effect of CMW treatment on glucose metabolism. MATERIALS/METHODS Colorimetric assay kits were used to determine the glucokinase (GK) and pyruvate dehydrogenase (PDH) activities, glucose uptake, and glycogen content. Either RT-PCR or western blot analysis was performed for quantitation of glucose transporter 2 (GLUT2), hepatocyte nuclear factor 1 alpha (HNF-1α), phosphatidylinositol 3-kinase (PI3k), protein kinase B (Akt), phosphorylated AMP-activated protein kinase (pAMPK), phosphoenolpyruvate carboxykinase, GK, PDH, and glycogen synthase kinase 3 beta (GSK-3β) expression levels. The α-glucosidase inhibitory activities of acarbose and CMW were evaluated by absorbance measurement. RESULTS CMW induced glucose uptake in HepG2 cells by increasing GLUT2 through HNF-1α expression stimulation. Glucose in the cells increased the CMW-induced phosphorylation of AMPK. In turn, glycolysis was stimulated, and glyconeogenesis was inhibited. Furthermore, by studying the mechanism of action of PI3k, Akt, and GSK-3β, and measuring glycogen content, the study confirmed that the glucose was stored in the liver as glycogen. Finally, CMW resulted in a higher level of α-glucosidase inhibitory activity than that from acarbose. CONCLUSION CMW induced the uptake of glucose into HepG2 cells, as well, it induced metabolism of the absorbed glucose. It is concluded that CMW is a candidate or potential use in diabetes prevention and treatment. PMID:28584574

  16. Cytotoxicity and analysis of apoptosis gene expression in colon cancer cell line treated with cell extract of Lactobacillus casei as indigenous probiotic bacterium

    Directory of Open Access Journals (Sweden)

    Amir Mirzaie

    2017-03-01

    Full Text Available Background and aim: Nowadays, the probiotic bacteria such as lactobacilli are known as prevention factor for various disease especially cancer. The aim of this study was to investigate the cytotoxic effect of Lactobacillus casei PTCC 1608 cell extract as probiotic bacteria on colon cancer cell line (HT29 and analysis of Bax and Bcl2 apoptosis gene expression. Methods: In this experimental study, the cell extract of heat killed L. casei was prepared in 0.01, 0.1, 1, 10, 100 and 1000 µg/ml concentration and subsequently, the cytotoxicity of various cell extracts on HT29 and HEC293 cell lines were evaluated in 24 hours using MTT assay. Moreover, the Bax and Bcl2 apoptosis gene expression level in HT29 cell line was analyzed using Real Time PCR. The apoptotic effects of cell extract was determined using Flow-cytometry technique. Finally, the collected data were statistically analyzed using one-way anal­ysis of variance with the SPSS/18 software. Results: The results of MTT test show that cell extracts of L. casei is able to reduce the survival rate of HT29 cell line to 0.95±0.44, 73.45±0.21, 51.49±0.87, 39.5±0.45 and 19.7±0.55. In addition to, the Real Time PCR results indicated the expression level of Bax and Bcl2 was increased and decreased respectively, in HT29 cell line (2.76 ± 0.54 (P<0.05, 0.21 ± 0.43 (P< 0.05 in 24 h. Moreover, the flow cytometry results indicated the 35.62 % apoptosis in HT29 cell line treated with IC50 value. Conclusion: The results show that the cell extract of L. casei PTCC 1608 could induced the apoptosis in HT29 cell line and it had low toxicity on HEC293 cell line. Therefore, it seems that L. casei has potential uses as probiotic for pharmaceutical applications including prevention and treatment of colon cancer.

  17. Disadvantages and advantages of transtibial technique for creating the anterior cruciate ligament femoral socket.

    Science.gov (United States)

    Robin, Brett N; Lubowitz, James H

    2014-10-01

    Anterior cruciate ligament (ACL) femoral socket techniques have distinct advantages and disadvantages when considering the following techniques: transtibial, anteromedial portal, outside-in, and outside-in retroconstruction. There is no one perfect technique and we have an incomplete understanding of anatomical, biomechanical, isometry, stability, and clinical outcomes. Our primary focus is transtibial technique for creating the ACL femoral socket. Advantages include less invasive, isometric graft placement, stable Lachman exam, and minimal graft impingement with the tunnel and notch. Disadvantages include nonanatomic vertical graft placement that can cause rotational instability and positive pivot shift, interference screw divergence, graft-tunnel length mismatch, femoral socket constraint, posterior cruciate ligament impingement, and a short, oblique tibial tunnel that may undermine the medial plateau in an attempt to achieve anatomic ACL reconstruction. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  18. Effect of different extracting solutions on the electrodialytic remediation of CCA-treated wood waste Part I. - Behaviour of Cu and Cr

    DEFF Research Database (Denmark)

    Velizarova, E.; Ribeiro, A. B.; Mateus, E.

    2004-01-01

    Removal of Cu and Cr from chromated copper arsenate (CCA)-treated wood waste under batch electrodialytic conditions was studied. The effect of different types of extracting solutions, such as deionised water or aqueous solutions of NaCl, formic acid, oxalic acid, and EDTA, on the magnitude...... and direction of the fluxes of Cu- and Cr-containing species in the electrodialytic cell was investigated. Oxalic acid was found to have the best performance if simultaneous removal of the two elements is required (removal efficiencies of 80.5% for Cu and 87.4% for Cr, respectively). A mixture of oxalic acid...... and formic acid also led to similar removal efficiencies. In these experiments, the target elements were accumulated in both the anode and cathode compartments of the electrodialytic cell due to the formation of negatively charged complexes with the organic acids used besides the free cationic forms...

  19. Clinical, histologic and histomorphometric evaluation of socket preservation using a synthetic nanocrystalline hydroxyapatite in comparison with a bovine xenograft: a randomized clinical trial.

    Science.gov (United States)

    Gholami, Gholam Ali; Najafi, Babak; Mashhadiabbas, Fatemeh; Goetz, Werner; Najafi, Siamak

    2012-10-01

    The aim of this study was to compare a nanocrystalline hydroxyapatite (NCHA), NanoBone(®) and a deproteinized bovine bone mineral (DBBM), Bio-Oss(®) with a collagen membrane on the horizontal ridge width alterations following tooth extraction, in addition to histologic aspects of the grafted extraction sockets. In this randomized clinical trial, 28 symmetrical, non-molar, extraction sockets using a split-mouth design in 12 patients (eight women and four men; aged 21-60; mean 44.6 ± 11.4 years), were randomly selected in the first group to be grafted with DBBM granules covered with a collagen membrane and in the other group grafted with NCHA covered with a collagen membrane. Following extraction horizontal ridge width was measured using caliper and was blindly compared to the dimensions measured prior to implant placement, at the 6- to 8-month follow-up. Subsequently, a 2 × 6 mm trephine core was obtained with aid of acrylic stent and routine histologic preparation was performed on the specimens. The width of the DBBM group decreased from 7.75 ± 1.55 to 6.68 ± 1.85 mm (P < 0.05), whereas the width of the NCHA group decreased from 7.36 ± 1.94 to 6.43 ± 2.08 mm (P < 0.05). The mean between-group difference did not reach statistical significance (P = 0.62). Furthermore, histologic and histomorphometric analyses revealed 28.63 ± 12.53% vital bone in NCHA group vs. 27.35 ± 12.39% in DBBM group, and no statistically significant difference between the groups (P = 0.68). Socket preservation using either NCHA or DBBM in combination with collagen membrane, results in similar, limited horizontal ridge width alterations following tooth extraction. © 2011 John Wiley & Sons A/S.

  20. Development of Inspection Technique for Socket Weld of Small Bore Piping in Nuclear Power Plant

    International Nuclear Information System (INIS)

    Yoon, Byungsik; Kim, Yongsik; Lee, Jeongseok

    2013-01-01

    The losses incurred by unplanned shutdowns are significant; consequently, early crack initiation and crack detection, including the detection of fillet weld manufacturing defects, is of the utmost importance. Current inspection techniques are not capable of reliably inspecting socket welds; therefore, new approaches are needed. The new technique must be sensitive to socket weld cracking, which usually initiates from the root, in order to detect the cracking during the early failure phase. In 2008, Kori unit 3 experienced leakage from the drain line socket weld of a steam generator. From this experience, KHNP enforced a management program to focus on enhancing the reliability of small bore socket weld piping inspections. Currently, conventional manual ultrasonic inspection techniques are used to detect service induced fatigue cracks. But there was uncertainty on manual ultrasonic inspection because of limited access to the welds and difficulties with contact between the ultrasonic probe and the OD surface of small bore piping. In this study, phased array ultrasonic inspection techniques are applied to increase inspection speed and reliability. Additionally a manually encoded scanner has been developed to enhance contact conditions and maintain constant signal quality. A phased array UT technique and system was developed to inspect small bore socket welds. The experimental results show all artificial flaws in the specimen were detected and measured. These experimental results show, that the newly developed inspection system, has improved the reliability and speed of small bore socket weld inspection. Based on these results, future works shall focus on additional experiments, with more realistic flaw responses. By applying this technique to the field, we expect that it can improve the integrity of small bore piping in nuclear power plants

  1. Effects of Gum acacia aqueous extract on the histology of the intestine and enzymes of both the intestine and the pancreas of albino rats treated with Meloxicam

    Science.gov (United States)

    Abd El-Mawla, Ahmed M. A.; Osman, Husam Eldien H.

    2011-01-01

    Background: Non-steroidal anti-inflammatory drugs (NSAIDs) cause gastrointestinal damage both in the upper and lower gastrointestinal tract, in addition to their undesirable side effects on the pancreas. Meloxicam like all NSAIDs has damaging effects on the gastrointestinal tract including perforations, ulcers and bleeding. Objective: The present work describes the effects of Gum acacia aqueous extract on the histology of intestine and enzymes of both intestine and Pancreas of albino rats treated with Meloxicam. Materials and Methods: This study was performed on four groups of equally weighed male rats, each group included ten animals; the first group was received a diet containing 0.2 mg/kg bw meloxicam per day; the second was given 1gm Gum acacia per day in its diet; the third was given meloxicam followed by gum in the same doses per day; while the fourth group (control rats) was placed on a normal diet and water. All rats were received their diet for a period of 21 days. Results: A considerable protective effect of Gum acacia aqueous extract on the histology of intestine of albino rats treated with meloxicam was recorded. In addition, the study displayed a significant increase (P < 0.001) in the intestinal enzymes; lipase, amylase, alkaline phosphatase (ALP) and lactate dehydrogenase (LDH) in the 1st and 3rd groups animals while these enzymes were significantly decreased (P < 0.001) in the 2nd group when compared with the 4th control group. Conclusion: This study concluded that Gum acacia provides a protection and defense against the harmful effects of meloxicam therapy used as one of the novel anti-Cox-1 and Cox-2 NSAIDs. PMID:21772755

  2. Effects of Gum acacia aqueous extract on the histology of the intestine and enzymes of both the intestine and the pancreas of albino rats treated with Meloxicam.

    Science.gov (United States)

    Abd El-Mawla, Ahmed M A; Osman, Husam Eldien H

    2011-04-01

    Non-steroidal anti-inflammatory drugs (NSAIDs) cause gastrointestinal damage both in the upper and lower gastrointestinal tract, in addition to their undesirable side effects on the pancreas. Meloxicam like all NSAIDs has damaging effects on the gastrointestinal tract including perforations, ulcers and bleeding. The present work describes the effects of Gum acacia aqueous extract on the histology of intestine and enzymes of both intestine and Pancreas of albino rats treated with Meloxicam. This study was performed on four groups of equally weighed male rats, each group included ten animals; the first group was received a diet containing 0.2 mg/kg bw meloxicam per day; the second was given 1gm Gum acacia per day in its diet; the third was given meloxicam followed by gum in the same doses per day; while the fourth group (control rats) was placed on a normal diet and water. All rats were received their diet for a period of 21 days. A considerable protective effect of Gum acacia aqueous extract on the histology of intestine of albino rats treated with meloxicam was recorded. In addition, the study displayed a significant increase (P < 0.001) in the intestinal enzymes; lipase, amylase, alkaline phosphatase (ALP) and lactate dehydrogenase (LDH) in the 1(st) and 3(rd) groups animals while these enzymes were significantly decreased (P < 0.001) in the 2(nd) group when compared with the 4(th) control group. This study concluded that Gum acacia provides a protection and defense against the harmful effects of meloxicam therapy used as one of the novel anti-Cox-1 and Cox-2 NSAIDs.

  3. Implementing the WebSocket Protocol Based on Formal Modelling and Automated Code Generation

    DEFF Research Database (Denmark)

    Simonsen, Kent Inge; Kristensen, Lars Michael

    2014-01-01

    with pragmatic annotations for automated code generation of protocol software. The contribution of this paper is an application of the approach as implemented in the PetriCode tool to obtain protocol software implementing the IETF WebSocket protocol. This demonstrates the scalability of our approach to real...... protocols. Furthermore, we perform formal verification of the CPN model prior to code generation, and test the implementation for interoperability against the Autobahn WebSocket test-suite resulting in 97% and 99% success rate for the client and server implementation, respectively. The tests show...

  4. Developing RESTful services with JAX-RS 2.0, WebSockets, and JSON

    CERN Document Server

    Kalali, Masoud

    2013-01-01

    Written as an easy and practical guide, this book is a crash course on using JAX-RS 2.0, JSON, and WebSockets to develop RESTful services.Getting Started with Developing RESTful Web Services using JAX-RS 2.0, JSON, and WebSockets is a perfect reading source for application developers who are familiar with Java EE and are keen to understand the new HTML5-related functionality introduced in Java EE 7 to improve productivity. To take full advantage of this book, you need to be familiar with Java EE and have some basic understanding of using the GlassFish application server.

  5. Fate of As(V)-treated nano zero-valent iron: determination of arsenic desorption potential under varying environmental conditions by phosphate extraction.

    Science.gov (United States)

    Dong, Haoran; Guan, Xiaohong; Lo, Irene M C

    2012-09-01

    Nano zero-valent iron (NZVI) offers a promising approach for arsenic remediation, but the spent NZVI with elevated arsenic content could arouse safety concerns. This study investigated the fate of As(V)-treated NZVI (As-NZVI), by examining the desorption potential of As under varying conditions. The desorption kinetics of As from As-NZVI as induced by phosphate was well described by a biphasic rate model. The effects of As(V)/NZVI mass ratio, pH, and aging time on arsenic desorption from As-NZVI by phosphate were investigated. Less arsenic desorption was observed at lower pH or higher As(V)/NZVI mass ratio, where stronger complexes (bidentate) formed between As(V) and NZVI corrosion products as indicated by FTIR analysis. Compared with the fresh As-NZVI, the amount of phosphate-extractable As significantly decreased in As-NZVI aged for 30 or 60 days. The results of the sequential extraction experiments demonstrated that a larger fraction of As was sorbed in the crystalline phases after aging, making it less susceptible to phosphate displacement. However, at pH 9, a slightly higher proportion of phosphate-extractable As was observed in the 60-day sample than in the 30-day sample. XPS results revealed the transformation of As(V) to more easily desorbed As(III) during aging and a higher As(III)/As(V) ratio in the 60-day sample at pH 9, which might have resulted in the higher desorption. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. Expression of vascular endothelial growth factor and matrix metalloproteinase-9 in Apis mellifera Lawang propolis extract gel-treated traumatic ulcers in diabetic rats

    Directory of Open Access Journals (Sweden)

    Diah Savitri Ernawati

    2018-03-01

    Full Text Available Aim: The aim of this study was to determine the effect of Apis mellifera propolis extract gel on vascular endothelial growth factor (VEGF and matrix metalloproteinase-9 (MMP-9 expression in the traumatic ulcers of rats afflicted with diabetes mellitus (DM. Materials and Methods: The study was conducted on 24 male Wistar rats (Rattus norvegicus induced with DM by injecting 50 mg/kg of Streptozotocin, intraperitoneally, and a traumatic ulcer on their lower lip mucosa. These were divided into eight groups: Four each for control and treatment groups. Each control and treatment group consisted of three rats. The control groups treated with hydroxypropyl methylcellulose 5% gel and treatment groups were administered with propolis extract gel. The expression of VEGF and MMP-9 was observed on days 3, 5, 7, and 9. Furthermore, mice sacrificed and the lower lip labial mucosa tissue of mice has been taken to make the histopathology anatomy preparation by means of immunohistochemical examination with monoclonal antibodies anti-VEGF and anti-MMP-9. Results: This experiment revealed higher VEGF expression and lower MMP-9 expression in the treatment group as compared to that of the control group. Analysis of Variance showed significant differences (p<0.01 of both VEGF expression and MMP-9 expression between the two groups. A Tukey's analysis did not find strong contrasts in VEGF and MMP-9 expressions between various treatment groups. However, those between treatment and control groups were found to be considerable. Conclusion: Propolis extract gel increased the expression of VEGF and decreased that of MMP-9 during the healing process of traumatic ulcers on the oral mucosa of diabetes afflicted Wistar rats (R. norvegicus.

  7. Polyploidy Analysis and Attenuation of Oxidative Stress in Hepatic Tissue of STZ-Induced Diabetic Rats Treated with an Aqueous Extract of Vochysia rufa

    Directory of Open Access Journals (Sweden)

    Izabela Barbosa Moraes

    2015-01-01

    Full Text Available Diabetes mellitus (DM is characterized by hyperglycemia and alterations in the metabolism of lipids, carbohydrates, and proteins. Due to its hypoglycemic effect Vochysia rufa is frequently used in Uberlandia, Brazil, to treat DM. Despite its popularity, there is little information about its effect on hepatic tissue. Therefore, we evaluated the histoarchitecture, oxidative stress parameters, and polyploidy of liver tissue from streptozotocin- (STZ- induced diabetic rats treated with aqueous extract of Vochysia rufa (AEV. Histology was determined by fixing the livers, processing, and staining with HE. Oxidative stress was determined by evaluating CAT, GPx, and SOD activity in liver homogenates and hepatic mitochondria fraction and by measuring GST, GSH levels and lipid peroxidation (MDA. Polyploidy was determined by subjecting isolated hepatocyte nuclei to flow cytometry. In the diabetic group, GST activity and GSH rates decreased whereas liver homogenate analysis showed that GPx, SOD activity and MDA increased. AEV treatment restored all parameters to normal levels. The oxidative stress analysis of hepatic mitochondria fraction showed similar results. Lower polyploid cell populations were found in the diabetic rat livers, even after glibenclamide treatment. Thus, AEV treatment efficiently reduced hepatic oxidative stress caused by STZ-induced diabetes and produced no morphological changes in the histological analysis.

  8. [Evaluation of the results of high-speed handpiece and minimally invasive extraction in impacted mandibular third molar extraction].

    Science.gov (United States)

    Yang, Ying-yang; DU, Sheng-nan; Lv, Zong-kai

    2015-08-01

    To compare the results of high-speed handpiece and minimally invasive extraction in impacted mandibular third molar extraction. From May 2011 to May 2014, 83 patients undergoing impacted mandibular third molar extraction were enrolled into the study and randomly divided into 2 groups: 42 patients in group A (experimental group) and 41 patients in group B (control group). Group B underwent extraction with traditional method and group A underwent high-speed handpiece and minimally invasive extraction of the impacted mandibular third molar. The occurrences of the root fracture, gingival laceration, tooth mobility, lingual bone plate fracture, jaw fracture and dislocation of temporomandibular joint during operation and lower lip numbness, dry socket, facial swelling and limitation of mouth opening after operation were observed and compared between 2 groups. The operation time, integrity of extraction sockets, VAS pain score and satisfaction from patients were collected and compared. SPSS 19.0 software package was used for statistical analysis. The occurrences of root fracture, gingival laceration, tooth mobility, lingual bone plate fracture, jaw fracture, and dislocation of temporomandibular joint during operation in group A significantly decreased compared with group B (Pextraction sockets, VAS pain scores and satisfaction scores in group A improved significantly compared with group B (Phandpiece and minimally invasive extraction should be widely used in impacted mandibular third molar extraction, due to the advantages of simple operation, high efficiency, minimal trauma, and few perioperative complications.

  9. Condutas para reparação da cavidade anoftálmica no Brasil Trends on anophthalmic socket repair in Brazil

    Directory of Open Access Journals (Sweden)

    Roberta Lilian Fernandes de Sousa

    2012-12-01

    Full Text Available OBJETIVOS: Avaliar as condutas mais utilizadas no tratamento da cavidade anoftálmica no Brasil, comparando-as com a realidade mundial. MÉTODOS: Estudo exploratório, usando questionário eletrônico enviado pela Internet para oftalmologistas membros da Sociedade Brasileira de Cirurgia Plástica Ocular, Vias Lacrimais e Órbita - SBCPO. As respostas obtidas foram avaliadas por meio de análise de aderência, utilizando o teste do Qui-quadrado. RESULTADOS: Foram recebidos 75 questionários respondidos. Cinquenta e três por cento dos entrevistados tratam cavidade anoftálmica frequentemente e o implante de esfera de polimetilmatacrilato, de 18 mm de diâmetro, é o usado pelos entrevistados na maioria das cirurgias, sendo revestido principalmente com esclera (92%. Apenas sete entrevistados já utilizaram implante acoplado com prótese externa. Oitenta e dois por cento dos entrevistados usam a técnica do enxerto dermoadiposo. O acompanhamento destes pacientes é feito semestralmente pela maior parte dos entrevistados. CONCLUSÃO: O tratamento da cavidade anoftálmica no Brasil geralmente é feito usando a esfera de polimetilmetacrilato, de diâmetro 18 milímetros. Implantes acoplados dificilmente são usados.PURPOSE: To determine the most common approach to repair the anophthalmic socket in Brazil, and to compare the data with the trends in other countries. METHODS: Exploratory study using electronic questionnaire sent by Internet to ophthalmologists members of the Brazilian Orbit and Oculoplastic Society (SBCPO. The received answers were analyzed by adhesion analysis, using Chi-square test. RESULTS: We received 75 answered questionnaires. Fifty-three per cent of the respondents frequently treat anophthalmic socket and use the 18 mm diameter polymethylmethacrylate sphere in the majority of the surgeries, mainly covered by sclera (92%. Only seven interviewees had used integrated implants with pegging procedure. Eighty-two per cent of the

  10. The Effect of a combination of 12% spirulina and 20% chitosan on macrophage, PMN, and lymphocyte cell expressions in post extraction wound

    Directory of Open Access Journals (Sweden)

    Nike Hendrijantini

    2017-06-01

    Full Text Available Background: Tooth extraction is the ultimate treatment option for defective teeth followed by the need for dentures. Inflammation is one phase of the healing process that should be minimized in order to preserve alveolar bone for denture support. Macrophage, PMN and lymphocyte cells are indicators of acute inflammation. Spirulina and chitosan are natural compounds with the potential to be anti-inflammatory agents. Purpose: This research aimed to determine macrophage, PMN and lymphocyte cells of animal models treated with a combination of 12% spirulina and 20% chitosan on the 1st, 2nd and 3rd post-extraction day. Methods: Animal models were randomly divided into control (K and treatment (P groups. Each group was further divided into three subgroups (KI, KII, KIII and PI, PII, PIII. The post-extraction sockets of the control group animals were then filled with CMC Na 3%. Meanwhile, the post-extraction sockets of the treatment group members were filled with a combination of 12% spirulina and 20% chitosan. Subsequently, the number of PMN, macrophage and lymphocyte cells was analyzed by means of HE analysis on the 1st., 2nd. and 3rd. days. Statistical analysis was then performed using a T-test. Results: There was a decrease in PMN cells and an increase in macrophage and lymphocyte cells on Days 1, 2, and 3. Conclusion: It can be concluded that a combination of 12% spirulina and 20% chitosan can not only decrease PMN cells, but can also increase macrophage and lymphocyte cells on Days 1, 2 and 3 after tooth extraction.

  11. Compact Fluorescent Plug-In Ballast-in-a-Socket

    Energy Technology Data Exchange (ETDEWEB)

    Rebecca Voelker

    2001-12-21

    The primary goal of this program was to develop a ballast system for plug-in CFLs (compact fluorescent lamps) that will directly replace standard metal shell, medium base incandescent lampholders (such as Levition No. 6098) for use with portable lamp fixtures, such as floor, table and desk lamps. A secondary goal was to identify a plug-in CFL that is optimized for use with this ballast. This Plug-in CFL Ballastin-a-Socket system will allow fixture manufacturers to easily manufacture CFL-based high-efficacy portable fixtures that provide residential and commercial consumers with attractive, cost-effective, and energy-efficient fixtures for use wherever portable incandescent fixtures are used today. The advantages of this proposed system over existing CFL solutions are that the fixtures can only be used with high-efficacy CFLs, and they will be more attractive and will have lower life-cycle costs than screw-in or adapter-based CFL retrofit solutions. These features should greatly increase the penetration of CFL's into the North American market. Our work has shown that using integrated circuits it is quite feasible to produce a lamp-fixture ballast of a size comparable to the current Edison-screw 3-way incandescent fixtures. As for price points for BIAS-based fixtures, end-users polled by the Lighting Research Institute at RPI indicated that they would pay as much as an additional $10 for a lamp containing such a ballast. The ballast has been optimized to run with a 26 W amalgam triple biax lamp in the base-down position, yet can accept non-amalgam versions of the lamp. With a few part alterations, the ballast can be produced to support 32 W lamps as well. The ballast uses GE's existing L-Comp[1] power topology in the circuit so that the integrated circuit design would be a design that could possibly be used by other CFL and EFL products with minor modifications. This gives added value by reducing cost and size of not only the BIAS, but also possibly other

  12. An anthropomorphic transhumeral prosthesis socket developed based on an oscillometric pump and controlled by force-sensitive resistor pressure signals.

    Science.gov (United States)

    Razak, N A Abd; Gholizadeh, H; Hasnan, N; Osman, N A Abu; Fadzil, S S Mohd; Hashim, N A

    2017-02-01

    While considering the importance of the interface between amputees and prosthesis sockets, we study an anthropomorphic prosthesis socket whose size can be dynamically changed according to the requirements of the residual limb. First, we introduce the structure and function of the anthropomorphic prosthesis socket. Second, we study the dynamic model of the prosthesis system and analyze the dynamic characteristics of the prosthesis socket system, the inputs of an oscillometric pump, and the control mechanism of force-sensitive resistor (FSR) pressure signals. Experiments on 10 healthy subjects using the designed system yield an average detection result between 102 and 112 kPa for the FSR pressure sensor and 39 and 41 kPa for the oscillometric pump. Results show the function of the FSR pressure signal in maintaining the contact pressure between the sockets and the residual limb. The potential development of an auto-adjusted socket that uses an oscillometric pump system will provide prosthetic sockets with controllable contact pressure at the residual limb. Moreover, this development is an attractive research area for researchers involved in rehabilitation engineering, prosthetics, and orthotics.

  13. Favorable effects of lacrimal plugs in patients with an anophthalmic socket

    NARCIS (Netherlands)

    Vardizer, Y.; Lang, Y.; Mourits, M. P.; Briscoe, M. D.

    2007-01-01

    BACKGROUND: The use of punctal plugs in the treatment of dry eyes is well established. Anophthalmic patients have less tears in the anophthalmic socket in comparison to their normal side, due to an absent corneal reflex (Lee & Elsie, 1981a,b). Many of those patients complain of dry eye symptoms,

  14. Development of a socketed foundation for cable barrier posts : phase I.

    Science.gov (United States)

    2012-02-01

    Four socketed foundation designs were evaluated for use as a new reusable base for high-tension, cable barrier : systems. Each foundation was a reinforced concrete cylindrical shape. The top of the foundation had an open steel tube to : accept the po...

  15. Editorial Commentary: The All-Epiphyseal Anterior Cruciate Ligament Distal Femoral Approach: Sockets or Tunnels?

    Science.gov (United States)

    Cordasco, Frank A

    2018-05-01

    I believe that the distal femoral approach for anterior cruciate ligament reconstruction in the skeletally immature athlete with 3 to 6 years of remaining growth is best performed with an all-inside, all-epiphyseal technique using sockets rather than an outside-in approach creating tunnels. A shorter socket rather than a longer tunnel exposes a smaller surface area of the lateral distal femoral physis to potential compromise and resultant valgus malalignment. In addition, exiting the lateral femoral aspect of the epiphysis with a full-diameter tunnel as compared with a smaller diameter drill hole used to prepare a socket places the posterior articular cartilage, the lateral collateral ligament and anterolateral ligament footprints, and the popliteus tendon insertion at risk. My preference for sockets is also related to my belief that they provide a superior biologic milieu for graft incorporation compared with a full-length tunnel with the attendant violation of the lateral femoral cortex of the epiphysis. Copyright © 2018 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  16. Circuit reliability boosted by soldering pins of disconnect plugs to sockets

    Science.gov (United States)

    Pierce, W. B.

    1964-01-01

    Where disconnect pins must be used for wiring and testing a circuit, improved system reliability is obtained by making a permanent joint between pins and sockets of the disconnect plug. After the circuit has been tested, contact points may be fused through soldering, brazing, or welding.

  17. Lateral capacity of rock sockets in limestone under cyclic and repeated loading.

    Science.gov (United States)

    2010-08-01

    This report contains the results from full scale lateral load testing of two short rock socketed shafts in : limestone, and the development of recommendations for p-y analysis using those results. Two short shafts 42 : inches in diameter were constru...

  18. A new method to solve anophthalmic contracted socket in embedding orbital implant in 114 cases

    Directory of Open Access Journals (Sweden)

    Ming Cheng

    2017-10-01

    Full Text Available AIM: To perform a new method for orbital implant and contracted socket through one time and its results.METHODS: Totally 114 patients 114 eyes, from January 2008 to June 2014, with contracted socket participated in this study. We incised the bulbar conjunctiva horizontally and excised scar tissue, then implanted the hydroxyapatite in the four extraocular muscles and tightly sutured the Tenon' capsule. After that, we put the superior and inferior conjunctival petals backwards and sutured them to the Tenon's capsule. All the patients were divided into four groups according to the vertical diameter length of the conjunctival defect area: Group Ⅰ: ≤5mm; Group Ⅱ: 6-10mm; Group Ⅲ: 11-15mm; and Group Ⅳ: ≥16mm. These patients were followed up for 6mo to 3y to observe the conjunctival sac shaping and growth of conjunctiva.RESULTS: There were 64 cases in Group Ⅰ, 31 cases in Group Ⅱ, 16 cases in Group Ⅲ and 3 cases in Group Ⅳ. All patients' conjunctival defect was covered by new conjunctiva and scar tissue 4 to 6wk after surgeries. Ten cases had contracted socket; 2 cases had orbital implant exposure, requiring reoperation. Of the 114 cases, 8 had contracted socket and could use a smaller conformer, 106 could use a normal size conformer.CONCLUSION: When the conjunctival defect was ≤15mm, this new method can address the orbital implant and contracted socket at the same time. While it was ≥16mm, flap transplantation is necessary.

  19. Gynostemma pentaphyllum Ethanolic Extract Protects Against Memory Deficits in an MPTP-Lesioned Mouse Model of Parkinson's Disease Treated with L-DOPA.

    Science.gov (United States)

    Kim, Kyung Sook; Zhao, Ting Ting; Shin, Keon Sung; Park, Hyun Jin; Cho, Yoon Jeong; Lee, Kyung Eun; Kim, Seung Hwan; Lee, Myung Koo

    2017-01-01

    This study investigated the effects of ethanol extract from Gynostemma pentaphyllum (GP-EX) on memory deficits in the 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-lesioned mouse model of Parkinson's disease (PD) (MPTP-lesioned mice). MPTP (30 mg/kg/day, 5 days)-lesioned mice showed deficits of habit learning memory and spatial memory, which were further aggravated by treatment with L-3,4-dihydroxyphenylalanine (L-DOPA) (25 mg/kg, 21 days). However, treatment with GP-EX (50 mg/kg, 21 days) ameliorated memory deficits in MPTP-lesioned mice treated with L-DOPA (25 mg/kg): GP-EX prevented the decreases in retention latency time in the passive avoidance test and tyrosine hydroxylase-immunopositive cells and dopamine levels in the nigrostriatum. GP-EX also reduced increases in retention transfer latency time of the elevated plus-maze test and expression of N-methyl-D-aspartate (NMDA) receptor and improved decreases in phosphorylation of extracellular signal-regulated kinase (ERK1/2) and cyclic AMP-response element binding protein (CREB) in the hippocampus in the same models. By contrast, L-DOPA treatment (10 mg/kg, 21 days) ameliorated memory deficits in MPTP-lesioned mice, which were further improved by GP-EX treatment. These results suggest that GP-EX ameliorates habit learning memory deficits by activating dopaminergic neurons and spatial memory deficits by modulating NMDA receptor-ERK1/2-CREB system in MPTP-lesioned mice treated with L-DOPA. GP-EX may serve as an adjuvant phytonutrient for memory deficits in PD.

  20. Betametasona e extrato aquoso de Arctium lappa no tratamento da angiostrongilíase Betamethasone and aqueous extract of Arctium lappa for treating angiostrongyliasis

    Directory of Open Access Journals (Sweden)

    Camila Argenta Fante

    2008-12-01

    Full Text Available Angiostrongylus costaricensis é um parasita que causa angiostrongilíase abdominal em humanos, seu tratamento inclui o uso de antiinflamatórios apesar da falta de estudos que justifiquem esta conduta. O objetivo deste artigo é avaliar o efeito da betametasona e da Arctium lappa na evolução de lesões intestinais induzidas pelo parasita. Utilizou-se camundongos Swiss, machos, adultos, distribuídos em 4 grupos: infectados tratados com betametasona; com Arctium lappa; não tratados e grupo controle. Os tratamentos iniciaram no 15º dia de infecção e permaneceram por 15 dias. Infiltrado eosinofílico e granuloma foram avaliados (1-leve; 2-moderado; 3-severo. A betametasona permitiu a evolução das lesões para formas mais graves, enquanto o extrato não interferiu na progressão da patologia. As substâncias empregadas não mostraram eficácia na proteção das lesões induzidas pelo Angiostrongylus costaricensis em camundongos. Estes achados desmotivam o uso de betametasona e Arctium lappa em humanos acometidos por angiostrongilíase abdominal.Angiostrongylus costaricensis is a parasite that causes abdominal angiostrongyliasis in humans. The treatment for it includes the use of anti-inflammatory drugs, despite the lack of studies to justify this approach. The objective of this paper was to evaluate the effect of betamethasone and Arctium lappa on the evolution of intestinal lesions induced by this parasite. Adult male Swiss mice were used, distributed into four groups: infected and treated with betamethasone; infected and treated with Arctium lappa; infected and not treated; and control group. The treatments were started on the 15th day after infection and continued for 15 days. The presence of eosinophilic infiltration and granuloma was evaluated (1-mild; 2-moderate; 3-severe. Betamethasone allowed the lesions to evolve into more severe forms, while the extract did not interfere with disease progression. The substances applied were

  1. Technique to assess the alveolar bone width for immediate implant placement in fresh extraction sockets

    Directory of Open Access Journals (Sweden)

    Neeraj Kumar Chandraker

    2013-01-01

    Conclusion: This technique will help the surgeon understand the thickness of labial plate especially the apical region without reflecting the flap, also aid in selection of proper dimension of dental implant, and if bone graft is needed.

  2. The Efficacy of Hyaluronic Acid in Postextraction Sockets of ...

    African Journals Online (AJOL)

    2018-01-30

    Jan 30, 2018 ... Materials and Methods: The study included a total of 25 healthy patients ... the treatment of periodontal disease such as gingivitis. Clinically ... The surgical extraction of wisdom teeth is one of the ... after impacted tooth surgery.

  3. Fractionation of heavy metals in liquefied chromated copper arsenate (CCA)-treated wood sludge using a modified BCR-sequential extraction procedure

    Science.gov (United States)

    Hui Pan; Chung-Yun Hse; Robert Gambrell; Todd F. Shupe

    2009-01-01

    Chromated copper arsenate (CCA)-treated wood was liquefied with polyethylene glycol/glycerin and sulfuric acid. After liquefaction, most CCA metals (98% As, 92% Cr, and 83% Cu) were removed from liquefied CCA-treated wood by precipitation with calcium hydroxide. The original CCA-treated wood and liquefied CCA-treated wood sludge were fractionated by a modified...

  4. Application of self-balanced loading test to socketed pile in weak rock

    Science.gov (United States)

    Cheng, Ye; Gong, Weiming; Dai, Guoliang; Wu, JingKun

    2008-11-01

    Method of self-balanced loading test differs from the traditional methods of pile test. The key equipment of the test is a cell. The cell specially designed is used to exert load which is placed in pile body. During the test, displacement values of the top plate and the bottom plate of the cell are recorded according to every level of load. So Q-S curves can be obtained. In terms of test results, the bearing capacity of pile can be judged. Equipments of the test are simply and cost of it is low. Under some special conditions, the method will take a great advantage. In Guangxi Province, tertiary mudstone distributes widely which is typical weak rock. It is usually chosen as the bearing stratum of pile foundation. In order to make full use of its high bearing capacity, pile is generally designed as belled pile. Foundations of two high-rise buildings which are close to each other are made up of belled socketed piles in weak rock. To obtain the bearing capacity of the belled socketed pile in weak rock, loading test in situ should be taken since it is not reasonable that experimental compression strength of the mudstone is used for design. The self-balanced loading test was applied to eight piles of two buildings. To get the best test effect, the assembly of cell should be taken different modes in terms of the depth that pile socketed in rock and the dimension of the enlarged toe. The assembly of cells had been taken three modes, and tests were carried on successfully. By the self-balanced loading test, the large bearing capacities of belled socketed piles were obtained. Several key parameters required in design were achieved from the tests. For the data of tests had been analyzed, the bearing performance of pile tip, pile side and whole pile was revealed. It is further realized that the bearing capacity of belled socketed pile in the mudstone will decrease after the mudstone it socketed in has been immerged. Among kinds of mineral ingredient in the mudstone

  5. Clinical and impression cytology findings of amniotic membrane and oral mucosal membrane transplantation for the management of socket contracture.

    Science.gov (United States)

    Kurtul, Bengi Ece; Erdener, Ugur; Mocan, Mehmet Cem; Irkec, Murat; Orhan, Mehmet

    2014-01-01

    To investigate and compare the cytopathological and clinical effects of amniotic membrane transplantation (AMT) and oral mucosal membrane transplantation (OMMT) in socket contraction. Twelve patients who could not be fitted with ocular prosthesis due to socket contracture were included in this study. Seven patients underwent AMT and 5 patients underwent OMMT. Thirteen patients who had healthy sockets were included as control group. Depth of inferior fornix, degree of inflammation, extent of the socket contracture and socket volume were measured in the preoperative period and at sixth and twelfth weeks postoperatively. Impression cytology of conjunctival fornices and tear transforming growth factor beta-1 (TGFβ1) levels were determined. In the AMT group, socket volume and lower fornix depth values were significantly higher (P=0.030 and P=0.004 respectively) and inflammation levels and impression cytology stages (P=0.037 and P=0.022 respectively) were significantly lower in postoperative period compared to preoperative period. In the OMMT group, no statistical differences were found in terms of clinical parameters, inflammation levels and impression cytology stages of preoperative versus postoperative values. Preoperative tear TGFβ1 levels were higher in AMT and OMMT groups compared to the control group (25.5 ng/mL, 26.3 ng/mL and 21.7 ng/mL respectively). Decreased tear TGFβ1 levels were observed in both the AMT and OMMT groups postoperatively (median decrease value=2.1 ng/mL and 2.7 ng/mL respectively). AMT is associated with postoperative improvement in inferior fornix depth, socket volume, inflammation and impression cytology levels and may be a more proper alternative method than OMMT in the management of socket contracture.

  6. A welding device for a socket in a hard-to-get-to circular pipe connection piece

    International Nuclear Information System (INIS)

    Deschamps, J.P.

    1995-01-01

    The welding device allows for the assembly of a socket inside the collection piece of an auxiliary pipe at the bottom of a dissolver tube; the device comprises a support around which is mounted a rotating welding head with a gear motor. Clamping of the socket around the head is achieved by the means of pneumatically driven clamping sections. A pulley and gutter tension device is aimed at securing the electric and metal supply cables. 9 refs., 3 figs

  7. Sockets Manufactured by CAD/CAM Method Have Positive Effects on the Quality of Life of Patients With Transtibial Amputation.

    Science.gov (United States)

    Karakoç, Mehmet; Batmaz, İbrahim; Sariyildiz, Mustafa Akif; Yazmalar, Levent; Aydin, Abdülkadir; Em, Serda

    2017-08-01

    Patients with amputation need prosthesis to comfortably move around. One of the most important parts of a good prosthesis is the socket. Currently, the most commonly used method is the traditional socket manufacturing method, which involves manual work; however, computer-aided design/computer-aided manufacturing (CAD/CAM) is also being used in the recent years. The present study aimed to investigate the effects of sockets manufactured by traditional and CAD/CAM method on clinical characteristics and quality of life of patients with transtibial amputation. The study included 72 patients with transtibial amputation using prosthesis, 36 of whom had CAD/CAM prosthetic sockets (group 1) and 36 had traditional prosthetic sockets (group 2). Amputation reason, prosthesis lifetime, walking time and distance with prosthesis, pain-free walking time with prosthesis, production time of the prosthesis, and adaptation time to the prosthesis were questioned. Quality of life was assessed using the 36-item Short Form Health Survey questionnaire and the Trinity Amputation and Prosthesis Experience Scales. Walking time and distance and pain-free walking time with prosthesis were significantly better in group 1 than those in group 2. Furthermore, the prosthesis was applied in a significantly shorter time, and socket adaptation time was significantly shorter in group 1. Except emotional role limitation, all 36-item Short Form Healthy Survey questionnaire parameters were significantly better in group 1 than in group 2. Trinity Amputation and Prosthesis Experience Scales activity limitation scores of group 1 were lower, and Trinity Amputation and Prosthesis Experience Scales satisfaction with the prosthesis scores were higher than those in group 2. Our study demonstrated that the sockets manufactured by CAD/CAM methods yield better outcomes in quality of life of patients with transtibial amputation than the sockets manufactured by the traditional method.

  8. Roles of p53 and caspases in induction of apoptosis in MCF- 7 breast cancer cells treated with a methanolic extract of Nigella sativa seeds.

    Science.gov (United States)

    Alhazmi, Mohammed I; Hasan, Tarique N; Shafi, Gowhar; Al-Assaf, Abdullah H; Alfawaz, Mohammed A; Alshatwi, Ali A

    2014-01-01

    Nigella Sativa (NS) is an herb from the Ranunculaceae family that exhibits numerous medicinal properties and has been used as important constituent of many complementary and alternative medicines (CAMs). The ability of NS to kill cancer cells such as PC3, HeLa and hepatoma cells is well established. However, our understanding of the mode of death caused by NS remains nebulous. The objective of this study was to gain further insight into the mode and mechanism of death caused by NS in breast cancer MCF-7 cells. Human breast cancer cells (MCF-7) were treated with a methanolic extract of NS, and a dose- and time-dependent study was performed. The IC50 was calculated using a Cell Titer Blue® viability assay assay, and evidence for DNA fragmentation was obtained by fluorescence microscopy TUNEL assay. Gene expression was also profiled for a number of apoptosis-related genes (Caspase-3, -8, -9 and p53 genes) through qPCR. The IC50 of MCF-7 cells was 62.8 μL/mL. When MCF-7 cells were exposed to 50 μL/mL and 100 μL/mL NS for 24 h, 48 h and 72 h, microscopic examination (TUNEL assay) revealed a dose- and time-dependent increase in apoptosis. Similarly, the expression of the Caspase-3, -8, -9 and p53 genes increased significantly according to the dose and time. NS induced apoptosis in MCF-7 cells through both the p53 and caspase pathways. NS could potentially represent an alternative source of medicine for breast cancer therapy.

  9. High-throughput sockets over RDMA for the Intel Xeon Phi coprocessor

    CERN Document Server

    Santogidis, Aram

    2017-01-01

    In this paper we describe the design, implementation and performance of Trans4SCIF, a user-level socket-like transport library for the Intel Xeon Phi coprocessor. Trans4SCIF library is primarily intended for high-throughput applications. It uses RDMA transfers over the native SCIF support, in a way that is transparent for the application, which has the illusion of using conventional stream sockets. We also discuss the integration of Trans4SCIF with the ZeroMQ messaging library, used extensively by several applications running at CERN. We show that this can lead to a substantial, up to 3x, increase of application throughput compared to the default TCP/IP transport option.

  10. Design method of large-diameter rock-socketed pile with steel casing

    Science.gov (United States)

    Liu, Ming-wei; Fang, Fang; Liang, Yue

    2018-02-01

    There is a lack of the design and calculation method of large-diameter rock-socketed pile with steel casing. Combined with the “twelfth five-year plan” of the National Science & Technology Pillar Program of China about “Key technologies on the ports and wharfs constructions of the mountain canalization channels”, this paper put forward the structured design requirements of concrete, steel bar distribution and steel casing, and a checking calculation method of the bearing capacity of the normal section of the pile and the maximum crack width at the bottom of the steel casing. The design method will have some degree of guiding significance for the design of large-diameter rock-socketed pile with steel casing.

  11. Vibrational fatigue failures in short cantilevered piping with socket-welding fittings

    International Nuclear Information System (INIS)

    Smith, J.K.

    1996-01-01

    Approximately 80% of the vibrational fatigue failures in nuclear power plants have been caused by high cycle vibrational fatigue. Many of these failures have occurred in short, small bore (2 in. nominal diameter and smaller), unbraced, cantilevered piping with socket-welding fittings. The fatigue failures initiated in the socket welds. These failures have been unexpected, and have caused costly, unscheduled outages in some cases. In order to reduce the number of vibrational fatigue failures in these short cantilevered pipes, an acceleration based vibrational fatigue screening criteria was developed under Electric Power Research Institute (EPRI) sponsorship. In this paper, the acceleration based criteria will be compared to the results obtained from detailed dynamic modeling of a short, cantilevered pipe

  12. A Multidisciplinary Approach for Rehabilitation of Enucleated Sockets: Ocular Implants with Custom Ocular Prosthesis.

    Science.gov (United States)

    Choudhury, Minati; Banu, Fathima; Natarajan, Shanmuganathan; Kumar, Anand; Tv, Padmanabhan

    2018-02-16

    Interdisciplinary prosthodontics goes beyond our imagination into fields that have a direct effect on our total body health and quality of life. Removal of an eye has a detrimental effect on the psychology of the patient. Enucleation involves removal of the eyeball proper and leads to an enophthalmic socket with a shrunken eye, which has a crippling effect on patient's emotional and social life. Custom-made eye prosthesis simulates the characteristics of the companion eye and helps in restoring the normal facial appearance. Restoration of saccadic eye movements occurring during speech is desirable because this greatly contributes to a normal facial expression. This can be achieved by an orbital implant, which helps in orbital volume replacement and restoration of prosthesis movement and comfort. This article describes prosthodontic rehabilitation of enucleated eye sockets with orbital implants for two patients.

  13. Development of fatigue resistance evaluation method for socket-weld-jointed pipes

    International Nuclear Information System (INIS)

    Noguchi, Shinji; Shibayama, Motoaki; Iwata, Masazumi; Matsuura, Masayuki

    2003-01-01

    Vent line, drain line and sampling line in nuclear power station have many socket welded-joints made of austenitic stainless steel. Their slenderness and stagnation yield some potential of vibration-induced cracking and stress corrosion cracking. For the joints under vibration, the authors firstly elucidated their welding-defect-related fatigue strength by using fracture mechanics. It could define the allowable sets of stress amplitude and defect size. Secondly, authors developed an ultra-sonic detecting apparatus by using a focus-type probe and its programmed crawl on socket part. The authors finally measured the stress amplitude and frequency by sticking strain gage on suspected joints, then evaluated the fatigue resistance of the joints. For more efficient procedure, the method of stress amplitude analysis through vibration measurement is being developed. (author)

  14. Application Study of Self-balanced Testing Method on Big Diameter Rock-socketed Piles

    Directory of Open Access Journals (Sweden)

    Qing-biao WANG

    2013-07-01

    Full Text Available Through the technological test of self-balanced testing method on big diameter rock-socketed piles of broadcasting centre building of Tai’an, this paper studies and analyzes the links of the balance position selection, the load cell production and installation, displacement sensor selection and installation, loading steps, stability conditions and determination of the bearing capacity in the process of self-balanced testing. And this paper summarizes key technology and engineering experience of self-balanced testing method of big diameter rock-socketed piles and, meanwhile, it also analyzes the difficult technical problems needed to be resolved urgently at present. Conclusion of the study has important significance to the popularization and application of self-balanced testing method and the similar projects.

  15. Fuzzy linguistic hedges for the selection of manufacturing process for prosthetic sockets

    Directory of Open Access Journals (Sweden)

    Richa Pandey

    2014-08-01

    Full Text Available In this paper, a comparison is presented between two prime methods of producing prosthetic sockets by using the fuzzy linguistic hedges approach on the qualitative feedback of Indian prosthetic users. Recent trends indicate that the Indian manufacturers have tried to adopt the newer technologies like reverse engineering (RE approach to achieve the desired goals. However, the satisfaction of the user is of utmost importance for the unique and customized products for rehabilitation. In order to analyze the effectiveness of the manufacturing approaches, user case studies are taken, based on the linguistic feedbacks, and a comparative study is conducted. Thirteen users from four different manufacturing units are taken for study and sockets made by conventional as well as RE are experimented. Fuzzy membership functions are constructed using the linguistic hedges based on the user feedbacks. An analytical hierarchy process (AHP is applied to arrive at a decision to select the manufacturing process for user satisfaction and manufacturing excellence.

  16. Lipophilic stinging nettle extracts possess potent anti-inflammatory activity, are not cytotoxic and may be superior to traditional tinctures for treating inflammatory disorders.

    Science.gov (United States)

    Johnson, Tyler A; Sohn, Johann; Inman, Wayne D; Bjeldanes, Leonard F; Rayburn, Keith

    2013-01-15

    Extracts of four plant portions (roots, stems, leaves and flowers) of Urtica dioica (the stinging nettle) were prepared using accelerated solvent extraction (ASE) involving water, hexanes, methanol and dichloromethane. The extracts were evaluated for their anti-inflammatory and cytotoxic activities in an NF-κB luciferase and MTT assay using macrophage immune (RAW264.7) cells. A standardized commercial ethanol extract of nettle leaves was also evaluated. The methanolic extract of the flowering portions displayed significant anti-inflammatory activity on par with a standard compound celastrol (1) but were moderately cytotoxic. Alternatively, the polar extracts (water, methanol, ethanol) of the roots, stems and leaves displayed moderate to weak anti-inflammatory activity, while the methanol and especially the water soluble extracts exhibited noticeable cytotoxicity. In contrast, the lipophilic dichloromethane extracts of the roots, stems and leaves exhibited potent anti-inflammatory effects greater than or equal to 1 with minimal cytotoxicity to RAW264.7 cells. Collectively these results suggest that using lipophilic extracts of stinging nettle may be more effective than traditional tinctures (water, methanol, ethanol) in clinical evaluations for the treatment of inflammatory disorders especially arthritis. A chemical investigation into the lipophilic extracts of stinging nettle to identify the bioactive compound(s) responsible for their observed anti-inflammatory activity is further warranted. Published by Elsevier GmbH.

  17. Lipophilic stinging nettle extracts possess potent anti-inflammatory activity, are not cytotoxic and may be superior to traditional tinctures for treating inflammatory disorders

    Science.gov (United States)

    Johnson, Tyler A.; Sohn, Johann; Inman, Wayne D.; Bjeldanes, Leonard F.; Rayburn, Keith

    2012-01-01

    Extracts of four plant portions (roots, stems, leaves and flowers) of Urtica dioica, (the stinging nettle) were prepared using accelerated solvent extraction (ASE) involving water, hexanes, methanol and dichloromethane. The extracts were evaluated for their anti-inflammatory and cytotoxic activity in an NF-κB luciferase and MTT assay using macrophage immune (RAW264.7) cells. A standardized commercial ethanol extract of nettle leaves were also evaluated. The methanolic extract of the flowering portions displayed significant anti-inflammatory activity on par with the standard anti-inflammatory agent celastrol (1) but was moderately cytotoxic. Alternatively, the polar extracts (water, methanol, ethanol) of the roots, stems and leaves plant portions displayed moderate to weak anti-inflammatory activity, while the methanol and especially the water soluble extracts exhibited noticeable cytotoxicity. In contrast, the lipophilic dichloromethane extracts of the roots, stems and leaves exhibited potent anti-inflammatory effects ≥ 1 with minimal cytotoxicity to RAW264.7 cells. Collectively these results suggest that using lipophilic extracts of the roots, stems or leaves of stinging nettle may be more effective then traditional tinctures (water, methanol, ethanol) to undergo clinical evaluations for the treatment of inflammatory disorders including arthritis. A chemical investigation into the lipophillic extracts of stinging nettle to identify the bioactive compound(s) responsible for their observed anti-inflammatory activity is further warranted. PMID:23092723

  18. Development of the Automated Ultrasonic Testing System for Inspection of the flaw in the Socket Weldment

    International Nuclear Information System (INIS)

    Lee, Jeong Ki; Park, Moon Ho; Park, Ki Sung; Lee, Jae Ho; Lim, Sung Jin

    2004-01-01

    Socket weldment used to change the flow direction of fluid nay have flaws such as lack of fusion and cracks. Liquid penetrant testing or Radiography testing have been applied as NDT methods for flaw detection of the socket weldment. But it is difficult to detect the flaw inside of the socket weldment with these methods. In order to inspect the flaws inside the socket weldment, a ultrasonic testing method is established and a ultrasonic transducer and automated ultrasonic testing system are developed for the inspection. The automated ultrasonic testing system is based on the portable personal computer and operated by the program based Windows 98 or 2000. The system has a pulser/receiver, 100MHz high speed A/D board, and basic functions of ultrasonic flaw detector using the program. For the automated testing, motion controller board of ISA interface type is developed to control the 4-axis scanner and a real time iC-scan image of the automated testing is displayed on the monitor. A flaws with the size of less than 1mm in depth are evaluated smaller than its actual site in the testing, but the flaws larger than 1mm appear larger than its actual size on the contrary. This tendency is shown to be increasing as the flaw size increases. h reliable and objective testing results are obtained with the developed system, so that it is expected that it can contribute to safety management and detection of repair position of pipe lines of nuclear power plants and chemical plants

  19. Skin grafting in severely contracted socket with the use of ′Compo′

    Directory of Open Access Journals (Sweden)

    Betharia S

    1990-01-01

    Full Text Available The results of split thickness autologous skin grafting along with the use of a dental impression material (Compo, a thermoplastic substance are presented in a series of 11 patients of acquired, severely contracted, anophthalmic sockets. Only the fornix fixation sutures and the central tarsorrhaphy were employed for the proper placement of graft without the use of retention devices. Artificial eyes were successfully fitted and retained subsequently after 6 weeks of grafting.

  20. Using PRP and human amniotic fluid combination for osteogenesis in rabbit socket preservation

    Directory of Open Access Journals (Sweden)

    Amir Hossein Moradi

    2015-01-01

    Full Text Available Introduction: Platelet-rich plasma (PRP is used as an adjunct treatment during periodontal grafting surgery because of its capability of enhancing healing process. Amniotic fluid is a rich source of growth factors and hyaluronic acid (HA and a good point to study its properties of wound healing and bone formation. The aim of this study was to evaluate the osteogenic properties of a combination of amniotic fluid and PRP in rabbit′s dental socket preservation. Materials and Methods: The study population consisted of 24 healthy male laboratory rabbits (average weight 3,125 ± 185 gr that were randomly allocated into four groups. PRP for the first group, human amniotic fluid (HAF for the second group, a combination of PRP and HAF (PRHA for the third group was used. In the fourth (control group, no biomaterial was used. In each group, half of the rabbits were sacrificed at 4 weeks following surgery and the rest were sacrificed after 8 weeks. Histological analysis of biopsies of the sockets was performed using hematoxylin and eosin (H&E staining. Data were analyzed using Statistical Package for the Social Sciences (SPSS software (version 16 and P-value <0.05 was considered significance. Results: All three experimental groups showed positive effect on bone formation in terms of area of trabecular bone and number of osteocytes and also vessel formation. Socket preservation using HAF and PRHA showed the highest impact on bone formation. Socket preservation using HAF also had the highest impact on vessel formation. Conclusion: PRHA and HAF appear to be useful for enhancing bone formation. Since there was no difference between HAF and PRHA, it seems beneficial to use HAF due to its simplicity of application.

  1. Smart Adaptive Socket to Improve Fit and Relieve Pain in Wounded Warriors

    Science.gov (United States)

    2017-10-01

    thermal dependence 1.2.b Maximum patient comfort 1.2.c improve response times for changes in volume 1.2.d Maximize range of compression region 2 the...and the prosthesis. The functionality and comfort of the prosthesis is to a great degree determined by the intimacy of this connection. Fluctuations...for a socket that accommodates a changing residual limb volume while maintaining comfort and fit. We will develop and complete preliminary real world

  2. Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis

    Directory of Open Access Journals (Sweden)

    Tresna Soemardi

    2010-10-01

    Full Text Available This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite EPR 174 as matrix and Epoxy Hardener V-140 as hardener. The sample composite test made by hand lay up method. Multiaxial characteristic from ramie fiber reinforced epoxy composite will be compared with ISO standard for plastic/polymer for health application and refers strength of material application at Prosthetics and Orthotics. The analysis was completed with the mode of the failure and the failure criterion observation by using Scanning Electron Microscope (SEM. Based on results of the research could be concluded that ramie fiber reinforced epoxy composite could be developed further as the alternative material for socket prosthesis on Vf 40-50%. Results of the research will be discussed in more detail in this paper.

  3. Successful conjunctival socket expansion in anophthalmic patients until the age of 2 years: an outpatient procedure

    Directory of Open Access Journals (Sweden)

    El Essawy RA

    2016-09-01

    Full Text Available Rania Assem El Essawy, Sameh Hassan Abdelbaky Department of Ophthalmology, Faculty of Medicine, Cairo University, Cairo, Egypt Purpose: To report the results of a simple outpatient method for soft tissue socket expansion in young children with congenital anophthalmos.Methods: Seventeen congenital anophthalmic sockets of 15 infants of a mean age of 4.2±4.4 months were fitted with specially designed serial solid acrylic shapes or hydrogel expanders using cyanoacrylate for eyelids closure when using the latter.Results: At the age of 2 years, the mean horizontal eyelid length increased from a mean of 11.6±4.5 to 19.4±4.6 mm and the volume of the last expander from a mean of 0.6±0.2 to 2.0±0.3 cm3. The specially designed acrylic shapes could be a substitute to the custom-made molds, which require general anesthesia.Conclusion: Successful increase in the horizontal eyelid length as well as the conjunctival socket volume could be achieved by a simple outpatient procedure without the need for repeated hospitalization and general anesthesia in these infants. Keywords: congenital anophthalmia, custom-made conformers, hydrogel expanders, cyanoacrylate glue

  4. High-cycle fatigue properties of small-bore socket-welded pipe joint

    International Nuclear Information System (INIS)

    Maekawa, Akira; Noda, Michiyasu; Suzuki, Michiaki

    2009-01-01

    Piping and equipment in nuclear power plants are structures including many welded joints. Reliability of welded joints is one of high-priority issues to improve the safety of nuclear power plants. However, occurrence of fatigue failures in small-bore socket-welded pipe joints by high-cycle vibrations is still reported. In this study, fatigue experiments on a socket-welded joint of austenitic stainless steel pipe was conducted under excitation conditions similar to those in actual plants to investigate vibration characteristics and fatigue strength. It was found that the natural frequency of pipe with socket-welded joint gradually decreased as fatigue damage developed, according to the Miner rule for fatigue life evaluation. The results indicate that the fatigue life of the welded pipe joint could be estimated by monitoring the decreasing ratio of the natural frequency of the pipe. The evaluation of decreasing ratio of the natural frequency in addition to fatigue damage evaluation by the Miner rule could enhance the accuracy of fatigue life evaluation. (author)

  5. The adult ball-and-socket ankle joint: surgical management of late ankle and subtalar arthritis.

    Science.gov (United States)

    Lewis, John S; DeOrio, James K

    2015-04-01

    We review the surgical management of 4 adult patients with ball-and-socket ankle deformity who developed end-stage subtalar and/or ankle joint arthritis. We retrospectively reviewed a series of 4 adult patients with ball-and-socket ankle configurations who underwent surgical treatment for either end-stage tibiotalar or subtalar arthritis, with either subtalar arthrodesis or total ankle replacement (TAR). Clinical outcome, including subjective pain assessment, limitation of activities, and difficulty with shoe wear, were assessed at follow-up. A total of 5 ankles in 4 patients were identified that met the inclusion criteria. There were 3 subtalar arthrodeses in 2 patients and 2 primary TARs in 2 patients. At an average follow-up of 30.5 (range = 17 to 59) months, there were no failures, although 1 patient who underwent TAR was considered an impending failure with aseptic component loosening. Of the 4 patients, 3 resumed normal activity with minimal pain and were very pleased with their overall outcome. Standard surgical interventions for ankle and subtalar arthritis, such as total ankle arthroplasty and subtalar arthrodesis, can be successfully performed in patients with ball-and-socket ankles; clinical outcome and survivorship, however, may be inferior to that in patients with normal ankle configurations. Therapeutic, Level IV: Case Series. © 2014 The Author(s).

  6. Hygrothermal Effect on Mechanical and Fatigue Properties of laminated Lower Limb Socket and Bacteria Growth

    Directory of Open Access Journals (Sweden)

    Fadhel Abbas Abdullah

    2016-12-01

    Full Text Available In this work, hygrothermal effect on the mechanical and fatigue properties of prosthetic socket lamination and its effect on the bacteria growth were studied. Two laminations composite materials were used in manufacturing prosthetic socket by using vacuum device. The reinforced materials of these laminations were perlon and carbon nanopowder (CNP while the matrix material was polyurethane resin. Tests performed in this work were the moisture absorption properties test to calculate percent moisture content according to ASTM 5229, tensile and fatigue tests with and without the hygrothermal effect to find the mechanical and fatigue properties, and the bacteria growth test under the hygrothermal effect to calculate the number of bacteria on the laminations. The results showed that the lamination (10 perlon+1 wt % CNP has mechanical properties than lamination (10 perlon with and without hygrothermal effect. The mechanical and fatigue properties for the two laminations were decreasing with increasing temperature and moisture.. Adding carbon nanopowder to the lamination (10 perlon increased ultimate stress, modulus of elastic, and endurance limit by (1.36, 2.35, and2.72 time respectively. Finally, the results showed that the Staphylococcus aureus growth increases with increasing temperature and moisture on the two laminations used in manufacturing prosthetic socket, and adding carbon nanopowder also increased the Staphylococcus aureus growth on the lamination.

  7. Study on torsional fretting wear behavior of a ball-on-socket contact configuration simulating an artificial cervical disk

    International Nuclear Information System (INIS)

    Wang, Song; Wang, Fei; Liao, Zhenhua; Wang, Qingliang; Liu, Yuhong; Liu, Weiqiang

    2015-01-01

    A ball-on-socket contact configuration was designed to simulate an artificial cervical disk in structure. UHMWPE (ultra high molecular weight polyethylene) hot pressed by powders and Ti6Al4V alloy were selected as the material combination of ball and socket. The socket surface was coated by a ~ 500 nm C-DLC (carbon ion implantation-diamond like carbon) mixed layer to improve its surface nano hardness and wear resistance. The torsional fretting wear behavior of the ball-on-socket model was tested at different angular displacements under 25% bovine serum lubrication with an axial force of 100 N to obtain more realistic results with that in vivo. The fretting running regimes and wear damage characteristics as well as wear mechanisms for both ball and socket were studied based on 2D (two dimension) optical microscope, SEM (scanning electron microscope) and 3D (three dimension) profiles. With the increase of angular displacement amplitude from 1° to 7°, three types of T-θ (Torsional torque-angular displacement amplitude) curves (i.e., linear, elliptical and parallelogram loops) corresponding to running regimes of PSR (partial slip regime), MR (mixed regime) and SR (slip regime) were observed and analyzed. Both the central region and the edge zone of the ball and socket were damaged. The worn surfaces were characterized by wear scratches and wear debris. In addition, more severe wear damage and more wear debris appeared on the central region of the socket at higher angular displacement amplitude. The dominant damage mechanism was a mix of surface scratch, adhesive wear and abrasive wear for the UHMWPE ball while that for the coated socket was abrasive wear by PE particles and some polishing and rolling process on the raised overgrown DLC grains. The frictional kinetic behavior, wear type, damage region and damage mechanism for the ball-on-socket model revealed significant differences with those of a ball-on-flat contact while showing better consistency with that of in

  8. Study on torsional fretting wear behavior of a ball-on-socket contact configuration simulating an artificial cervical disk

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Song [State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China); Wang, Fei [School of Material Science and Engineering, China University of Mining and Technology, Xuzhou 221116 (China); Liao, Zhenhua [Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China); Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); Wang, Qingliang [School of Material Science and Engineering, China University of Mining and Technology, Xuzhou 221116 (China); Liu, Yuhong [State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China); Liu, Weiqiang, E-mail: weiqliu@hotmail.com [Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China)

    2015-10-01

    A ball-on-socket contact configuration was designed to simulate an artificial cervical disk in structure. UHMWPE (ultra high molecular weight polyethylene) hot pressed by powders and Ti6Al4V alloy were selected as the material combination of ball and socket. The socket surface was coated by a ~ 500 nm C-DLC (carbon ion implantation-diamond like carbon) mixed layer to improve its surface nano hardness and wear resistance. The torsional fretting wear behavior of the ball-on-socket model was tested at different angular displacements under 25% bovine serum lubrication with an axial force of 100 N to obtain more realistic results with that in vivo. The fretting running regimes and wear damage characteristics as well as wear mechanisms for both ball and socket were studied based on 2D (two dimension) optical microscope, SEM (scanning electron microscope) and 3D (three dimension) profiles. With the increase of angular displacement amplitude from 1° to 7°, three types of T-θ (Torsional torque-angular displacement amplitude) curves (i.e., linear, elliptical and parallelogram loops) corresponding to running regimes of PSR (partial slip regime), MR (mixed regime) and SR (slip regime) were observed and analyzed. Both the central region and the edge zone of the ball and socket were damaged. The worn surfaces were characterized by wear scratches and wear debris. In addition, more severe wear damage and more wear debris appeared on the central region of the socket at higher angular displacement amplitude. The dominant damage mechanism was a mix of surface scratch, adhesive wear and abrasive wear for the UHMWPE ball while that for the coated socket was abrasive wear by PE particles and some polishing and rolling process on the raised overgrown DLC grains. The frictional kinetic behavior, wear type, damage region and damage mechanism for the ball-on-socket model revealed significant differences with those of a ball-on-flat contact while showing better consistency with that of in

  9. Development of a socket-type rib coaptation device made of poly-L-lactide fibers: feasibility study in a canine model

    Science.gov (United States)

    Komatsu, Teruya; Sakaguchi, Yasuto; Muranishi, Yusuke; Yutaka, Yojiro; Date, Hiroshi; Nakamura, Tatsuo

    2018-01-01

    Background Costal coaptation pins made of poly-L-lactide (PLA) are clinically available for fixing surgically divided ribs. However, the clinical results of such rib fixation have not been completely satisfactory. We aimed to develop a new rib coaptation socket system and explore its clinical applicability. Methods We surgically divided three consecutive ribs of each beagle dog, and rib coaptation sockets were implanted to stabilize each rib. Fifteen 3-dimensional (3D)-printed and 30 PLA fiber knitted sockets were implanted in five and ten dogs, respectively, to stabilize the artificially divided ribs. Mechanical analysis of the sockets and radiographical examination of costal fixation were performed to evaluate the effectiveness of the newly developed socket system for rib stabilization. Results All 15 ribs with 3D-printed sockets had displaced 1 month after the operation. Three ribs in one dog with implanted PLA fiber knitted sockets were displaced radiographically after 1 month, and the grade of displacement remained unchanged after 6 months. The remaining 27 ribs fixed with PLA fiber knitted sockets did not show any displacement. Conclusions The PLA fiber knitted rib coaptation socket system was sufficiently durable for the stabilization of divided ribs with biocompatibility. This promising finding can be applied for clinical stabilization of divided ribs. PMID:29850125

  10. The combination use of platelet-rich fibrin and treated dentin matrix for tooth root regeneration by cell homing.

    Science.gov (United States)

    Ji, Baohui; Sheng, Lei; Chen, Gang; Guo, Shujuan; Xie, Li; Yang, Bo; Guo, Weihua; Tian, Weidong

    2015-01-01

    Endogenous regeneration through cell homing provides an alternative approach for tissue regeneration, except cell transplantation, especially considering clinical translation. However, tooth root regeneration through cell homing remains a provocative approach in need of intensive study. Both platelet-rich fibrin (PRF) and treated dentin matrix (TDM) are warehouses of various growth factors, which can promote cell homing. We hypothesized that endogenous stem cells are able to sense biological cues from PRF membrane and TDM, and contribute to the regeneration of tooth root, including soft and hard periodontal tissues. Therefore, the biological effects of canine PRF and TDM on periodontal ligament stem cells (PDLSCs) and bone marrow mesenchymal stem cells (BMSCs) were evaluated respectively in vitro. Beagle dogs were used as orthotopic transplantation model. It was found that PRF significantly recruited and stimulated the proliferation of PDLSCs and BMSCs in vitro. Together, PRF and TDM induced cell differentiation by upregulating the mineralization-related gene expression of bone sialoprotein (BSP) and osteopotin (OPN) after 7 days coculture. In vivo, transplantation of autologous PRF and allogeneic TDM into fresh tooth extraction socket achieved successful root regeneration 3 months postsurgery, characterized by the regeneration of cementum and periodontal ligament (PDL)-like tissues with orientated fibers, indicative of functional restoration. The results suggest that tooth root connected to the alveolar bone by cementum-PDL complex can be regenerated through the implantation of PRF and TDM in a tooth socket microenvironment, probably by homing of BMSCs and PDLSCs. Furthermore, bioactive cues and inductive microenvironment are key factors for endogenous regeneration. This approach provides a tangible pathway toward clinical translation.

  11. Gap junctions are selectively associated with interlocking ball-and-sockets but not protrusions in the lens.

    Science.gov (United States)

    Biswas, Sondip K; Lee, Jai Eun; Brako, Lawrence; Jiang, Jean X; Lo, Woo-Kuen

    2010-11-09

    Ball-and-sockets and protrusions are specialized interlocking membrane domains between lens fibers of all species studied. Ball-and-sockets and protrusions are similar in their shape, size, and surface morphology, and are traditionally believed to play a key role in maintaining fiber-to-fiber stability. Here, we evaluate the hypothesis that ball-and-sockets and protrusions possess important structural and functional differences during fiber cell differentiation and maturation. Intact lenses of leghorn chickens (E7 days to P62 weeks old) and rhesus monkeys (1.5-20 years old) were studied with SEM, freeze-fracture TEM, freeze-fracture immunogold labeling (FRIL), and filipin cytochemistry for membrane cholesterol detection. SEM showed that ball-and-sockets were distributed along the long and short sides of hexagonal fiber cells, whereas protrusions were located along the cell corners, from superficial to deep cortical regions in both chicken and monkey lenses. Importantly, by freeze-fracture TEM, we discovered the selective association of gap junctions with all ball-and-sockets examined, but not with protrusions, in both species. In the embryonic chicken lens (E18), the abundant distribution of ball-and-socket gap junctions was regularly found in an approximate zone extending at least 300 μm deep from the equatorial surface of the superficial cortical fibers. Many ball-and-socket gap junctions often protruded deeply into neighboring cells. However, in the mature fibers of monkey lenses, several ball-and-sockets exhibited only partial occupancy of gap junctions with disorganized connexons, possibly due to degradation of gap junctions during fiber maturation and aging. FRIL analysis confirmed that both connexin46 (Cx46) and connexin50 (Cx50) antibodies specifically labeled ball-and-socket gap junctions, but not protrusions. Furthermore, filipin cytochemistry revealed that the ball-and-socket gap junctions contained different amounts of cholesterol (i.e., cholesterol

  12. Addition of urea and thiourea to electrophoresis sample buffer improves efficiency of protein extraction from TCA/acetone-treated smooth muscle tissues for phos-tag SDS-PAGE.

    Science.gov (United States)

    Takeya, Kosuke; Kaneko, Toshiyuki; Miyazu, Motoi; Takai, Akira

    2018-01-01

    Phosphorylation analysis by using phos-tag technique has been reported to be suitable for highly sensitive quantification of smooth muscle myosin regulatory light chain (LC 20 ) phosphorylation. However, there is another factor that will affect the sensitivity of phosphorylation analysis, that is, protein extraction. Here, we optimized the conditions for total protein extraction out of trichloroacetic acid (TCA)-fixed tissues. Standard SDS sample buffer extracted less LC 20 , actin and myosin phosphatase targeting subunit 1 (MYPT1) from TCA/acetone treated ciliary muscle strips. On the other hand, sample buffer containing urea and thiourea in addition to lithium dodecyl sulfate (LDS) or SDS extracted those proteins more efficiently, and thus increased the detection sensitivity up to 4-5 fold. Phos-tag SDS-PAGE separated dephosphorylated and phosphorylated LC 20 s extracted in LDS/urea/thiourea sample buffer to the same extent as those in standard SDS buffer. We have concluded that LDS (or SDS) /urea/thiourea sample buffer is suitable for highly sensitive phosphorylation analysis in smooth muscle, especially when it is treated with TCA/acetone. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Interrelationship between lignin-rich dichloromethane extracts of hot water-treated wood fibers and high-density polyethylene (HDPE) in wood plastic composite (WPC) production

    Science.gov (United States)

    Manuel R. Pelaez-Samaniego; Vikram Yadama; Manuel Garcia-Perez; Eini Lowell; Rui Zhu; Karl Englund

    2016-01-01

    Hot water extraction (HWE) partially removes hemicelluloses from wood while leaving the majority of the lignin and cellulose; however, the lignin partially migrates to the inner surfaces of the cell wall where it can be deposited as a layer that is sometimes visible as droplets. This lignin-rich material was isolated via Soxhlet extraction with dichloromethane to...

  14. Maintenance of marginal bone support and soft tissue esthetics at immediately provisionalized OsseoSpeed implants placed into extraction sites: 2-year results.

    Science.gov (United States)

    Noelken, Robert; Neffe, Bettina Anna; Kunkel, Martin; Wagner, Wilfried

    2014-02-01

    Placement of implants into extraction sockets targets the maintenance of peri-implant hard and soft tissue structures and the support of a natural and esthetic contour. The main advantages of immediate implant insertion in comparison with delayed implant placement protocols are as follows: a reduced treatment time, less number of sessions, and, thus, the less invasive procedure. This study examines the clinical performance (survival rate, marginal bone levels and Pink Esthetic Score [PES]) of OsseoSpeed implants placed into extraction sockets with immediate provisionalization in the anterior maxilla after a follow-up of at least 12 months. Twenty patients received a total number of 37 OsseoSpeed implants which were immediately inserted into extraction sockets with or without facial bone deficiencies of various dimensions. A flapless procedure was applied, and the implants were immediately provisionalized with temporary crowns without occlusal contacts. Facial gaps between implant surface and facial bone or the previous contour of the alveolar process were grafted with autogenous bone chips. Implants in diameters 3.5, 4.0, 4.5, and 5.0 with lengths of 11-17 mm were used in the study. During the course of the study, interproximal marginal bone levels, the thickness of the facial bony wall, implant success rate according to the criteria established by Buser, and the PES were assessed per implant. One patient with three implants did not continue the study after prosthesis delivery, the remaining 34 implants were still in function at the final follow-up (survival rate: 100%). The mean follow-up period was 27 months (range, 12-40 months). Marginal bone height at the level of the implant shoulder averaged -0.1 ± 0.55 mm (range, -1.25 to 1.47 mm) at the final follow-up. The mean PES ratings were 11.3 ± 1.8 (range, 6-14) at the final follow-up. In 78% of the patients, the PES was preserved or even improved. Success rates, marginal bone levels, and esthetic results suggest

  15. Evora® chromium-cobalt dual mobility socket: results at a minimum 10 years' follow-up.

    Science.gov (United States)

    Leclercq, S; Benoit, J Y; de Rosa, J P; Tallier, E; Leteurtre, C; Girardin, P H

    2013-12-01

    The Evora chromium-cobalt alloy dual mobility socket claims to display a large articulation tribology different from that of stainless steel models, limiting the risk of intraprosthetic dislocation and wear. The present study reports a minimum of 10years' follow-up in a multicenter prospective series of 200 sockets previously reported on at 5years. The use of chromium-cobalt in dual mobility sockets provides a low rate of failure at 10years, especially as regards to osteolysis and intraprosthetic dislocation. Two hundred hydroxyapatite-coated molded chromium-cobalt sockets without titanium interface were implanted without cement in 194 patients with a mean age of 70 years (range, 32-91 years). Clinical results were assessed on Postel Merle d'Aubigné and Harris scores, plain radiographs and survival analysis. At a mean 11 years' follow-up (10-13 years), 56 patients had died and 31 were lost to follow-up. Four underwent surgical revision (3 femoral components, and 1 socket for migration at 9 years with complete disappearance of the hydroxyapatite). A total of 109 implants were analyzable in 107 patients with a mean age of 81 years (55-93 years). At follow-up, the mean Harris score was 90 (75-96) and the PMA score 16.3 (14-18). There were no cases of loosening (except for the case reoperated on at 9 years) and no acetabular radiolucency or cysts. There were 2 cases of non-evolutive femoral radiolucency and 10 of femoral granuloma, involving head size > 22 mm (P<0.0001) and a cemented titanium stem (P=0.004) as risk factors. There were no dislocations in the large or small articulation. Ten-year survival was 99% (95% CI: 97.3%-100%) with socket revision as censorship criterion. The absence of dislocation in both small and large articulations confirmed the efficacy of the dual mobility concept and suggested an advantage for chromium-cobalt sockets in reducing the rate of intraprosthetic dislocation and preventing blockage of the large articulation by a better

  16. Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions

    NARCIS (Netherlands)

    Livas, Christos; Halazonetis, Demetrios J.; Booij, Johan Willem; Pandis, Nikolaos; Tu, Yu-Kang; Katsaros, Christos

    Introduction: Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions.

  17. Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions

    NARCIS (Netherlands)

    Livas, C.; Halazonetis, D.J.; Booij, J.W.; Pandis, N.; Tu, Y.K.; Katsaros, C.

    2013-01-01

    INTRODUCTION: Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions.

  18. Immediate loading of tapered implants placed in postextraction sockets: retrospective analysis of the 5-year clinical outcome.

    Science.gov (United States)

    Mura, Priamo

    2012-08-01

    The use of immediate implant loading protocols delivers obvious benefits to the patient. When applied in healed sites, this has not only been well documented in the totally edentolous mandible but has also been documented and reported to be predictable in the upper jaw, and in cases of partial edentoulism, as well. A further application of immediate loading protocol, although still controversial, especially when replacing single maxillary teeth in the anterior zone, is the immediate implant placement and provisionalization in postextractive sockets. In consideration of the oxidized surface promoting bone healing and the tapered shape of the implant body, the Replace Select Tapered TiUnite implants have been used for many years in our clinic when facing these clinical situations. This article will report about our long-term clinical experience with such implants and the relevant role of a correct surgical and prosthetic treatment planning. The aim of this retrospective study was to report on the 5-year clinical and radiologic outcome of patients treated with Replace Select Tapered TiUnite implants when used according to an immediate loading protocol in postextraction sites. In routine practice, 56 consecutive patients were treated with 79 implants. The patients, 23 males and 33 females, had a mean age of 50.9 years, range 21-76 years, at implant placement. Forty-seven implants were placed in the maxilla and 32 implants were placed in the mandible. All implants were placed in postextraction sites and were immediately loaded. Provisional restorations were delivered within 2 hours from surgery and all were in occlusion. Forty-three patients received a single implant while in the remaining 13 patients the implants were splinted. Definitive prosthetic restoration was delivered within 1 to 4 months following implant placement. Evaluations of soft tissue health and marginal bone remodeling were conducted. An independent radiologist performed the radiographic evaluation

  19. The Capability of Fiber Bragg Grating Sensors to Measure Amputees’ Trans-Tibial Stump/Socket Interface Pressures

    Directory of Open Access Journals (Sweden)

    Faisal Rafiq Mahamd Adikan

    2013-08-01

    Full Text Available This study presents the first investigation into the capability of fiber Bragg grating (FBG sensors to measure interface pressure between the stump and the prosthetic sockets of a trans-tibial amputee. FBG element(s were recoated with and embedded in a thin layer of epoxy material to form a sensing pad, which was in turn embedded in a silicone polymer material to form a pressure sensor. The sensor was tested in real time by inserting a heavy-duty balloon into the socket and inflating it by using an air compressor. This test was conducted to examine the sensitivity and repeatability of the sensor when subjected to pressure from the stump of the trans-tibial amputee and to mimic the actual environment of the amputee’s Patellar Tendon (PT bar. The sensor exhibited a sensitivity of 127 pm/N and a maximum FSO hysteresis of around ~0.09 in real-time operation. Very good reliability was achieved when the sensor was utilized for in situ measurements. This study may lead to smart FBG-based amputee stump/socket structures for pressure monitoring in amputee socket systems, which will result in better-designed prosthetic sockets that ensure improved patient satisfaction.

  20. The capability of fiber Bragg grating sensors to measure amputees' trans-tibial stump/socket interface pressures.

    Science.gov (United States)

    Al-Fakih, Ebrahim A; Osman, Noor Azuan Abu; Eshraghi, Arezoo; Adikan, Faisal Rafiq Mahamd

    2013-08-12

    This study presents the first investigation into the capability of fiber Bragg grating (FBG) sensors to measure interface pressure between the stump and the prosthetic sockets of a trans-tibial amputee. FBG element(s) were recoated with and embedded in a thin layer of epoxy material to form a sensing pad, which was in turn embedded in a silicone polymer material to form a pressure sensor. The sensor was tested in real time by inserting a heavy-duty balloon into the socket and inflating it by using an air compressor. This test was conducted to examine the sensitivity and repeatability of the sensor when subjected to pressure from the stump of the trans-tibial amputee and to mimic the actual environment of the amputee's Patellar Tendon (PT) bar. The sensor exhibited a sensitivity of 127 pm/N and a maximum FSO hysteresis of around ~0.09 in real-time operation. Very good reliability was achieved when the sensor was utilized for in situ measurements. This study may lead to smart FBG-based amputee stump/socket structures for pressure monitoring in amputee socket systems, which will result in better-designed prosthetic sockets that ensure improved patient satisfaction.

  1. Evaluation of the antiplasmodial and cytotoxicity potentials of husk fiber extracts from Cocos nucifera, a medicinal plant used in Nigeria to treat human malaria.

    Science.gov (United States)

    Adebayo, J O; Santana, A E G; Krettli, A U

    2012-03-01

    Nigeria is an African country where transmission of malaria occurs all year round and where most inhabitants use plants as remedies against parasitic diseases, including malaria. Some of such medicinal plants have their antimalarial efficacies already demonstrated experimentally, active compounds isolated and the mechanism of drug action suggested. Decoction of Cocos nucifera husk is used in the middle belt region of Nigeria as an antimalarial remedy. In our current studies, we tested extracts from husks of four varieties of C. nucifera, all collected in Brazil, where the plant fruit is popularly named 'coco'. The husks of coco mestiço, amarelo, anão and gigante collected in the Northeast of Brazil were used to prepare extracts at the Chemistry Department, Federal University of Alagoas (UFAL), which were then tested for their antiplasmodial activities, cytotoxicities and hemolytic activities in vitro. Only the hexane extract of coco mestiço was active against the blood forms of Plasmodium falciparum human malaria parasite maintained in continuous culture. Most extracts presented selectivity indices of coco mestiço had a selectivity index of 35, meaning that the extract is not toxic. The isolation of the active compounds from coco mestiço husks has not yet been done.

  2. Effect of parsley (Petroselinum crispum (Mill.) Nym. ex A.W. Hill, Apiaceae) extracts on some biochemical parameters of oxidative stress in mice treated with CCl(4).

    Science.gov (United States)

    Popović, Mira; Kaurinović, Biljana; Jakovljević, Vida; Mimica-Dukic, Neda; Bursać, Marija

    2007-08-01

    The in vitro and in vivo antioxidant activity of different extracts of leaves and root of parsley (Petroselinum crispum (Mill.) Nym. ex A.W. Hill, Apiaceae) were studied. Free radical scavenging capacity (RSC) was evaluated measuring the scavenging activity on the 2,2-diphenyl-1-picrylhydrazil (DPPH) and OH radicals. Also, the effects on lipid peroxidation (LP) were evaluated. The results obtained showed that all examined extracts act as good scavengers of DPPH and OH radicals and reduce the intensity of LP. The in vivo effects were evaluated on some antioxidant systems (activities of LPx, GSH-Px, Px, CAT and XOD, and GSH content) in the mice liver and blood after treatment with the examined parsley extracts, or in combination with carbon tetrachloride (CCl(4)). On the basis of the results obtained it can be concluded that the examined extracts exhibited a certain protective effect. However, combined treatments with CCl(4) and the examined extracts showed both positive and negative synergism, inducing or suppressing the influence of CCl(4) alone. (c) 2007 John Wiley & Sons, Ltd.

  3. Upregulation of adhesion complex proteins and fibronectin by human keratinocytes treated with an aqueous extract from the leaves of Chromolaena odorata (Eupolin).

    Science.gov (United States)

    Phan, T T; Allen, J; Hughes, M A; Cherry, G; Wojnarowska, F

    2000-01-01

    The fresh leaves and extract of the plant Chromolaena odorata are a traditional herbal treatment in developing countries for burns, soft tissue wounds and skin infections. We have previously shown that the extract had an effect on the growth and proliferation of keratinocytes and fibroblasts in culture. This study has demonstrated that Eupolin extract increased expression of several components of the adhesion complex and fibronectin by human keratinocytes. Using indirect immunofluorescence we found increased expression (dose-dependent) of laminin 5, laminin 1, collagen IV, and fibronectin. The expression of the b1 and b4 integrins was upregulated by the extract at low concentrations (0.1 and 1 microg/ml), but the expression was decreased at higher doses of Eupolin (10 microg-150 microg/ml). A number of clinical studies carried out by Vietnamese and international medical investigators have demonstrated the efficacy of this extract on the wound healing process. In this study we have shown that Eupolin stimulated the expression of many proteins of the adhesion complex and fibronectin by human keratinocytes. The adhesion complex proteins are essential to stabilise epithelium and this effect could contribute to the clinical efficacy of Eupolin in healing.

  4. Differences in Femoral Head Penetration Between Highly Cross-Linked Polyethylene Cemented Sockets and Uncemented Liners.

    Science.gov (United States)

    Morita, Daigo; Seki, Taisuke; Higuchi, Yoshitoshi; Takegami, Yasuhiko; Ishiguro, Naoki

    2017-12-01

    This study aimed at investigating differences in femoral head penetration between highly cross-linked polyethylene (HXLPE) cemented sockets and uncemented liners during 5 years postoperatively. Ninety-six patients (106 hips) with a mean age of 64.4 (range, 35-83) years underwent total hip arthroplasty using a HXLPE cemented socket or liner and were respectively divided into cemented (35 patients [37 hips]) and uncemented (61 patients [69 hips]) groups. Femoral head penetrations were evaluated on both anteroposterior (AP)-view and Lauenstein-view radiographs, and mean polyethylene (PE) wear rates were calculated based on femoral head penetration from 2 to 5 years. Multivariate analyses were performed to assess risk factors for PE wear. At 5 years postoperatively, the cemented and uncemented groups exhibited proximal direction femoral head penetrations of 0.103 mm and 0.124 mm (P = .226) and anterior direction penetrations of 0.090 mm and 0.151 mm (P = .002), respectively. The corresponding mean PE wear rates were 0.004 mm/y and 0.009 mm/y in the AP-view (P = .286) and 0.005 mm/y and 0.012 mm/y in the Lauenstein-view (P = .168), respectively. Left-side operation and high activity were independent risk factors for PE wear on AP-view. When HXLPE was used, all mean PE wear rates were very low and those of cemented sockets and uncemented liners were very similar. PE particle theory suggests that the occurrence of osteolysis and related aseptic loosening might consequently decrease. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. The Effect of Platelet-Rich Fibrin, Calcium Sulfate Hemihydrate, Platelet-Rich Plasma and Resorbable Collagen on Soft Tissue Closure of Extraction Sites

    Directory of Open Access Journals (Sweden)

    Lisa M. Yerke

    2017-05-01

    Full Text Available Rapid and complete soft tissue healing after tooth extraction minimizes surgical complications and facilitates subsequent implant placement. We used four treatment methods and assessed changes in soft tissue socket closure following tooth extraction in humans. The effects of platelet-rich fibrin-calcium sulfate hemihydrate (PRF-CSH, platelet-rich plasma-calcium sulfate hemihydrate (PRP-CSH, a resorbable collagen dressing (RCD, and no grafting material were compared in a randomized, controlled pilot study with a blinded parallel design (N = 23. Patients with a hopeless tooth scheduled for extraction were randomly assigned to one of the four treatment groups. Socket measurements were obtained immediately after extraction and treatment, as well as after 21 days. There was a significant decrease in the total epithelialized external surface area of the extraction sockets in each group at all time points. However, there were no significant differences in soft tissue closure (p > 0.05 at any time point and PRF-CSH or PRP-CSH did not provide any additional benefit to enhance the soft tissue closure of extraction sockets compared with either RCD or sites without graft.

  6. Development and Evaluation of Secure Socket Layer Visualization Tool with Packet Capturing Function

    Directory of Open Access Journals (Sweden)

    Arai Masayuki

    2015-01-01

    Full Text Available Secure Socket Layer (SSL has become a fundamental technology that secures browser-processed personal details sent to the server. As a result, communication and computer engineers are advised to learn the protocol. However, understanding SSL is very difficult because of its intricate communication procedure. To solve this problem, we developed a visualization tool for understanding SSL. This paper describes the design, implementation methods, and evaluation of the tool. The evaluation results show that the visualization tool is effective for learning SSL.

  7. Secondary reconstruction of a mobile eye socket 30 years after enucleation of the eyeball for retinoblastoma: a case report.

    Science.gov (United States)

    Okumoto, T; Koike, G; Yoshimura, Y

    2014-03-01

    A mobile eye socket is generally reconstructed by inserting an implant into the scleral pocket immediately after bulbar exenteration, or by attaching the extra-ocular muscles to the implanted artificial eyeball immediately after enucleation. However, exposure of the implanted material and other problems can occur. We achieved satisfactory reconstruction of a mobile eye socket by using an autogenous cartilage graft and a pericranial flap in a patient with long-standing anophthalmia due to enucleation. This case is presented with a review of the relevant literature. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  8. 3D reconstruction of the structure of a residual limb for customising the design of a prosthetic socket.

    Science.gov (United States)

    Shuxian, Zheng; Wanhua, Zhao; Bingheng, Lu

    2005-01-01

    Aiming at overcoming the limitations of the plaster-casting method in traditional prosthetic socket fabrication, the idea of reconstructing the 3D models for bones and skin of the residual limb is proposed. Given the two-dimensional obtained image through CT scanning, using image processing and reverse engineering techniques, the 3D solid model of the residual limb can be successfully reconstructed. The new approach can reproduce both the internal and the external structure of the residual limb. It can moreover avoid making a positive mould by the way of manual modifications. In addition to this, it can provide a scientific basis for the individualization of prosthetic socket design.

  9. Sensitive determination of estrogens in environmental waters treated with polymeric ionic liquid-based stir cake sorptive extraction and liquid chromatographic analysis.

    Science.gov (United States)

    Chen, Lei; Mei, Meng; Huang, Xiaojia; Yuan, Dongxing

    2016-05-15

    A simple, sensitive and environmentally friendly method using polymeric ionic liquid-based stir cake sorptive extraction followed by high performance liquid chromatography with diode array detection (HPLC/DAD) has been developed for efficient quantification of six selected estrogens in environmental waters. To extract trace estrogens effectively, a poly (1-ally-3-vinylimidazolium chloride-co-ethylene dimethacrylate) monolithic cake was prepared and used as the sorbent of stir cake sorptive extraction (SCSE). The effects of preparation conditions of sorbent and extraction parameters of SCSE for estrogens were investigated and optimized. Under optimal conditions, the developed method showed satisfactory analytical performance for targeted analytes. Low limits of detection (S/N=3) and quantification limits (S/N=10) were achieved within the range of 0.024-0.057 µg/L and 0.08-0.19 µg/L, respectively. Good linearity of method was obtained for analytes with the correlation coefficients (R(2)) above 0.99. At the same time, satisfactory method repeatability and reproducibility was achieved in terms of intra- and inter-day precisions, respectively. Finally, the established SCSE-HPLC/DAD method was successfully applied for the determination of estrogens in different environmental water samples. Recoveries obtained for the determination of estrogens in spiked samples ranged from 71.2% to 108%, with RSDs below 10% in all cases. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Application of Coenzyme Q10 for Accelerating Soft Tissue Wound Healing after Tooth Extraction in Rats

    Directory of Open Access Journals (Sweden)

    Toshiki Yoneda

    2014-12-01

    Full Text Available Accelerating wound healing after tooth extraction is beneficial in dental treatment. Application of antioxidants, such as reduced coenzyme Q10 (rCoQ10, may promote wound healing after tooth extraction. In this study, we examined the effects of topical application of rCoQ10 on wound healing after tooth extraction in rats. After maxillary first molars were extracted, male Fischer 344 rats (8 weeks old (n = 27 received topical application of ointment containing 5% rCoQ10 (experimental group or control ointment (control group to the sockets for 3 or 8 days (n = 6–7/group. At 3 days after extraction, the experimental group showed higher collagen density and lower numbers of polymorphonuclear leukocytes in the upper part of socket, as compared to the control group (p < 0.05. Gene expression of interleukin-1β, tumor necrosis factor-α and nuclear factor-κB were also lower in the experimental group than in the control group (p < 0.05. At 8 days after tooth extraction, there were no significant differences in collagen density, number of polymorphonuclear leukocytes and bone fill between the groups. Our results suggest that topical application of rCoQ10 promotes wound healing in the soft tissue of the alveolar socket, but that rCoQ10 has a limited effect on bone remodeling in rats.

  11. Novel bone substitute material in alveolar bone healing following tooth extraction: an experimental study in sheep.

    Science.gov (United States)

    Liu, Jinyi; Schmidlin, Patrick R; Philipp, Alexander; Hild, Nora; Tawse-Smith, Andrew; Duncan, Warwick

    2016-07-01

    Electrospun cotton wool-like nanocomposite (ECWN) is a novel synthetic bone substitute that incorporates amorphous calcium phosphate nanoparticles into a biodegradable synthetic copolymer poly(lactide-co-glycolide). The objectives of this study were to develop a tooth extraction socket model in sheep for bone graft research and to compare ECWN and bovine-derived xenograft (BX) in this