WorldWideScience

Sample records for externally distributed technical

  1. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2005-02-25

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database.

  2. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2009-08-28

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  3. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2010-04-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  4. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2011-04-04

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  5. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2007-03-12

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Minor

  6. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2010-01-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the

  7. Technical basis for external dosimetry at the Waste Isolation Pilot Plant (WIPP)

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, E.W. [Science Applications International Corp., Oak Ridge, TN (United States); Wu, C.F.; Goff, T.E. [Westinghouse Electric Corp., Carlsbad, NM (United States). Waste Isolation Div.

    1993-12-31

    The WIPP External Dosimetry Program, administered by Westinghouse Electric Corporation, Waste Isolation Division, for the US Department of Energy (DOE), provides external dosimetry support services for operations at the Waste Isolation Pilot Plant (WIPP) Site. These operations include the receipt, experimentation with, storage, and disposal of transuranic (TRU) wastes. This document describes the technical basis for the WIPP External Radiation Dosimetry Program. The purposes of this document are to: (1) provide assurance that the WIPP External Radiation Dosimetry Program is in compliance with all regulatory requirements, (2) provide assurance that the WIPP External Radiation Dosimetry Program is derived from a sound technical base, (3) serve as a technical reference for radiation protection personnel, and (4) aid in identifying and planning for future needs. The external radiation exposure fields are those that are documented in the WIPP Final Safety Analysis Report.

  8. External Representations for Data Distributions: In Search of Cognitive Fit

    Science.gov (United States)

    Lem, Stephanie; Onghana, Patrick; Verschaffel, Lieven; Van Dooren, Wim

    2013-01-01

    Data distributions can be represented using different external representations, such as histograms and boxplots. Although the role of external representations has been extensively studied in mathematics, this is less the case in statistics. This study helps to fill this gap by systematically varying the representation that accompanies a task…

  9. DISTRIBUTED EXTERNAL SURFACE HARDENING OF CAR DESIGN BY WINDING

    Directory of Open Access Journals (Sweden)

    O. V. Fomin

    2017-04-01

    Full Text Available Purpose. The paper involves coverage of features and results of the research conducted by the authors to determine the feasibility and establishment of pre-stressed-strained state of freight cars by winding in order to improve their strength characteristics. It is also necessary to present the theoretical justification for the effectiveness of the application of this method for car designs and an appropriate example for the tank-car. Methodology. The conducted study is based on an analysis of known works on the subject, mathematical justification and computer modeling. At the calculations of rolling stock components contemporary conventional techniques were used. Findings. Authors found that the winding method for pre-stressed-strained state is effective and appropriate for use in the construction of railway rolling stock and, in particular freight cars. Freight car designs with the pre-stressed-strained state are characterized by a number of strength advantages, among which there is an improvement of the work on the perception of operational loads and resource conservation. Originality. For the first time it is proposed the improvement of bearing capacity of freight car constructions through the creation of its component in the directed stress-strained state. It is also for the first time proposed the use of distributed external surface hardening by the method of winding to create a pre-stress-strained state of structural components of freight cars. The methods for winding designs of freight cars and their implementation were considered. Practical value. The studies developed a number of technical solutions for improving the design of freight cars and tank-container, which has been patented. Corresponding solutions for the tank-car are partially presented. Practical implementation of such solutions will significantly improve the technical, economic and operational performances of car designs.

  10. Automated external defibrillators: technical considerations and clinical promise.

    Science.gov (United States)

    Takata, T S; Page, R L; Joglar, J A

    2001-12-04

    Early defibrillation is the most important determinant of survival for victims of cardiac arrest due to ventricular fibrillation. The automated external defibrillator (AED) was developed as the result of the American Heart Association's Public Access Defibrillation initiative. The goal of this initiative is to place AEDs in strategic locations so that laypersons with minimal training could promptly defibrillate victims of cardiac arrest. Because of changes in design and the use of alternative waveforms for defibrillation, the modern AED is compact and portable, simple to use, and highly efficacious; in addition, it requires little maintenance. Automated external defibrillators have been used successfully by traditional and nontraditional responders as well as laypersons. In special environments, such as casinos and commercial aircraft, AEDs have performed particularly well. State and federal legislation has eased concerns about AED use by extending legal protection to AED users under Good Samaritan laws. Since the experience continues to be positive, AEDs are being used in increasingly diverse community locations, and public awareness is growing. The American Heart Association's initiative is progressing rapidly.

  11. EO Model for Tacit Knowledge Externalization in Socio-Technical Enterprises

    Directory of Open Access Journals (Sweden)

    Shreyas Suresh Rao

    2017-03-01

    Full Text Available Aim/Purpose: A vital business activity within socio-technical enterprises is tacit knowledge externalization, which elicits and explicates tacit knowledge of enterprise employees as external knowledge. The aim of this paper is to integrate diverse aspects of externalization through the Enterprise Ontology model. Background: Across two decades, researchers have explored various aspects of tacit knowledge externalization. However, from the existing works, it is revealed that there is no uniform representation of the externalization process, which has resulted in divergent and contradictory interpretations across the literature. Methodology\t: The Enterprise Ontology model is constructed step-wise through the conceptual and measurement views. While the conceptual view encompasses three patterns that model the externalization process, the measurement view employs certainty-factor model to empirically measure the outcome of the externalization process. Contribution: The paper contributes towards knowledge management literature in two ways. The first contribution is the Enterprise Ontology model that integrates diverse aspects of externalization. The second contribution is a Web application that validates the model through a case study in banking. Findings: The findings show that the Enterprise Ontology model and the patterns are pragmatic in externalizing the tacit knowledge of experts in a problem-solving scenario within a banking enterprise. Recommendations for Practitioners\t: Consider the diverse aspects (what, where, when, why, and how during the tacit knowledge externalization process. Future Research:\tTo extend the Enterprise Ontology model to include externalization from partially automated enterprise systems.

  12. Spatial distribution of external and internal intercostal activity in dogs

    Science.gov (United States)

    Legrand, Alexandre; De Troyer, André

    1999-01-01

    The observation that the external and internal interosseous intercostal muscles in the dog show marked regional differences in mechanical advantage has prompted us to re-examine the topographic distribution of electrical activity among these muscles during spontaneous breathing. Inspiratory activity was recorded only from the areas of the external intercostals with an inspiratory mechanical advantage, and expiratory activity was recorded only from the areas of the internal intercostals with an expiratory mechanical advantage. The expiratory discharges previously recorded from the caudal external intercostals and the inspiratory discharges recorded from the rostral internal intercostals were probably due to cross-contamination. Activity in each muscle area was also quantified relative to the activity measured during tetanic, supramaximal nerve stimulation (maximal activity). External intercostal inspiratory activity was consistently greater in the areas with a greater inspiratory advantage (i.e. the dorsal aspect of the rostral segments) than in the areas with a smaller inspiratory advantage, and internal intercostal expiratory activity was invariably greatest in the areas with the greatest expiratory advantage (i.e. the dorsal aspect of the caudal segments). This topographic distribution of neural drive confers to the external intercostal muscles an inspiratory action on the lung during breathing and to the internal interosseous intercostals an expiratory action. PMID:10373710

  13. External Technical Support for School Improvement: Critical Issues from the Chilean Experience

    Science.gov (United States)

    Osses, Alejandra; Bellei, Cristián; Valenzuela, Juan Pablo

    2015-01-01

    To what extent school improvement processes can be initiated and sustained from the outside has been a relevant question for policy-makers seeking to increase quality in education. Since 2008, the Chilean Government is strongly promoting the use of external technical support (ETS) services to support school improvement processes, as part of the…

  14. Mode-locking external-cavity laser-diode sensor for displacement measurements of technical surfaces

    Science.gov (United States)

    Czarske, Jürgen; Möbius, Jasper; Moldenhauer, Karsten

    2005-09-01

    A novel laser sensor for position measurements of technical solid-state surfaces is proposed. An external Fabry-Perot laser cavity is assembled by use of an antireflection-coated laser diode together with the technical surface. Mode locking results from pumping the laser diode synchronously to the mode spacing of the cavity. The laser cavity length, i.e., the distance to the measurement object, is determined by evaluation of the modulation transfer function of the cavity by means of a phase-locked loop. The mode-locking external-cavity laser sensor incorporates a resonance effect that results in highly resolving position and displacement measurements. More than a factor-of-10 higher resolution than with conventional nonresonant sensing principles is achieved. Results of the displacement measurements of various technical surfaces are reported. Experimental and theoretical investigations are in good agreement.

  15. Estimation of current density distribution under electrodes for external defibrillation

    Directory of Open Access Journals (Sweden)

    Papazov Sava P

    2002-12-01

    Full Text Available Abstract Background Transthoracic defibrillation is the most common life-saving technique for the restoration of the heart rhythm of cardiac arrest victims. The procedure requires adequate application of large electrodes on the patient chest, to ensure low-resistance electrical contact. The current density distribution under the electrodes is non-uniform, leading to muscle contraction and pain, or risks of burning. The recent introduction of automatic external defibrillators and even wearable defibrillators, presents new demanding requirements for the structure of electrodes. Method and Results Using the pseudo-elliptic differential equation of Laplace type with appropriate boundary conditions and applying finite element method modeling, electrodes of various shapes and structure were studied. The non-uniformity of the current density distribution was shown to be moderately improved by adding a low resistivity layer between the metal and tissue and by a ring around the electrode perimeter. The inclusion of openings in long-term wearable electrodes additionally disturbs the current density profile. However, a number of small-size perforations may result in acceptable current density distribution. Conclusion The current density distribution non-uniformity of circular electrodes is about 30% less than that of square-shaped electrodes. The use of an interface layer of intermediate resistivity, comparable to that of the underlying tissues, and a high-resistivity perimeter ring, can further improve the distribution. The inclusion of skin aeration openings disturbs the current paths, but an appropriate selection of number and size provides a reasonable compromise.

  16. Technical description of the Swedish natural gas distribution system

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Ronny [KM Miljoeteknik AB (Sweden)

    1997-06-01

    This description of the Swedish distribution network has been produced to provide information for distribution companies, trade organisations, etc., who have an interest in getting a clear understanding of the technical design and standards, technical directives, etc., which have served as guidance in the development. The technical description covers the piping system from a measuring and regulating station (MR station) up to the consumer`s substation, however, only sections with a maximum operating pressure of 4 bar. By way of introduction, the description contains introductory information on supply channels, consumption patterns and the principal design of the high pressure network in Sweden 10 refs, 10 figs, 1 tab

  17. Distribution of ferromagnetic moments in crystals under external twisting

    Energy Technology Data Exchange (ETDEWEB)

    Zavorotnev, Yu.D., E-mail: zavorotnev.yurii@gmail.com [Donetsk Institute for Physics and Engineering, NAS of Ukraine, 72 R.Luxemburg Street, 83114 Donetsk (Ukraine); Pashinskaya, E.H.; Varyukhin, V.N. [Donetsk Institute for Physics and Engineering, NAS of Ukraine, 72 R.Luxemburg Street, 83114 Donetsk (Ukraine); Popova, O.Yu. [Donetsk National Technical University, 58 Artema Street, 83001 Donetsk (Ukraine)

    2014-01-15

    In an easy-axis ferromagnet, the effect of superposition of severe plastic deformation by twisting (SPDT) perpendicular to the “easy axis” on the ferromagnetic order parameter (OP) distribution is studied. The consideration is carried out within the frameworks of phenomenological theory of Landau. It is shown that SPDT effects the results in occurrence of the normal component of the magnetic OP and periodical change of OP modulus. The law of distribution of the magnetic moment is determined by proximity of the temperature of the crystal and any phase transition. - Highlights: • The effect of application of external twisting deformation to a ferromagnetic crystal of easy-axis type is studied theoretically. • The deformation axis is directed normally to the easy axis of the crystal. • The consideration is carried out within the frameworks of a phenomenological model. • It is shown that in this case, a spiral long-period structure is formed. • Besides, spatial distribution of the modulus of ferromagnetic vector changes depending on the temperature and the twisting moment.

  18. 76 FR 38550 - Technical Standard DOE-STD-1095-2011, Department of Energy Laboratory Accreditation for External...

    Science.gov (United States)

    2011-07-01

    ...The Department of Energy (DOE or the Department) is issuing Technical Standard DOE-STD-1095-2011, Department of Energy Laboratory Accreditation for External Dosimetry, January 2011. This standard provides updated technical criteria for performance testing for, and provides a requirement for onsite quality assurance assessments of, whole body and extremity dosimetry programs in use at DOE......

  19. Key issues and technical route of cyber physical distribution system

    Science.gov (United States)

    Zheng, P. X.; Chen, B.; Zheng, L. J.; Zhang, G. L.; Fan, Y. L.; Pei, T.

    2017-01-01

    Relying on the National High Technology Research and Development Program, this paper introduced the key issues in Cyber Physical Distribution System (CPDS), mainly includes: composite modelling method and interaction mechanism, system planning method, security defence technology, distributed control theory. Then on this basis, the corresponding technical route is proposed, and a more detailed research framework along with main schemes to be adopted is also presented.

  20. Procedural Influence on Internal and External Assessment Scores of Undergraduate Vocational and Technical Education Research Projects in Nigerian Universities

    Science.gov (United States)

    A. C., John; Manabete, S. S.

    2015-01-01

    This study sought to determine the procedural influence on internal and external assessment scores of undergraduate research projects in vocational and technical education programmes in the university under study. A survey research design was used for the conduct of this study. The population consisted of 130 lecturers and 1,847 students in the…

  1. Distributing Working Memory Resources and the Use of External Representations on Problem Solving

    OpenAIRE

    大塚, 一徳; 宮谷, 真人

    2007-01-01

    This study examines how problem solvers use distributing working memory resources over internal and external epresentations. Participants played three-dimensional versions of number guessing games. The playing of number guessing games is directly related to consumption of working memory resources. They could use arbitrarily the game record windows which are the external representations of these games and, thus, they could distribute working memory demands over internal working memory resource...

  2. Technical considerations in planning a distributed teleradiology system.

    Science.gov (United States)

    Ho, B K; Taira, R K; Steckel, R J; Kangarloo, H

    1995-01-01

    A large-scale teleradiology project is under way to link a Florida imaging center to the UCLA Department of Radiology. The initial goal is to provide Florida patients in a routine clinical practice environment with subspecialty consultation by academic radiologists. The plan then calls for the addition of other domestic and international sites. Technical issues in planning to establish the necessary teleradiology infrastructure include wide area network design, image compression, distributed archiving, and special viewing station features. Special emphasis is placed on archive design that makes intelligent use of information, such as triggering events from the radiological information system (RIS) for image prefetching and visual cues from photo-icons for full-size image retrieval. Concepts such as teleconsultation and remote procedure monitoring are aimed at providing the same level of services at distant sites that would be available in-house. This article highlights the system design parameters that must be considered to engineer a scalable distributed teleradiology system.

  3. Estimating the distribution of external causes in hospital data from injury diagnosis.

    Science.gov (United States)

    Bhalla, Kavi; Shahraz, Saeid; Naghavi, Mohsen; Lozano, Rafael; Murray, Christopher

    2008-11-01

    Hospital discharge datasets are a key source for estimating the incidence of non-fatal injuries. While hospital records usually document injury diagnosis (e.g. traumatic brain injury, femur fracture, etc.) accurately, they often contain poor quality information on external causes (e.g. road traffic crashes, falls, fires, etc.), if such data is recorded at all. However, estimating incidence by external causes is essential for designing effective prevention strategies. Thus, we developed a method for estimating the number of hospital admissions due to each external cause based on injury diagnosis. We start with a prior probability distribution of external causes for each case (based on victim age and sex) and use Bayesian inference to update the probabilities based on the victim's injury diagnoses. We validate the method on a trial dataset in which both external causes and injury diagnoses are known and demonstrate application to two problems: redistribution of cases classified to ill-defined external causes in one hospital data system; and, estimation of external causes in another hospital data system that only records nature of injuries. In comparison with age-sex proportional distribution (the method usually employed), we found the Bayesian method to be a significant improvement for generating estimates of incidence for many external causes (e.g. fires, drownings, poisonings). But the method, performed poorly in distinguishing between falls and road traffic injuries, both of which are characterized by similar injury codes in our datasets. While such stop gap methods can help derive additional information, hospitals need to incorporate accurate external cause coding in routine record keeping.

  4. Aerophytic Cyanobacteria as a Factor in the Biodegradation of Technical Materials on External Building Walls

    OpenAIRE

    Piontek Marlena; Lechów Hanna

    2014-01-01

    A study conducted at the Institute of Environmental Engineering, University of Zielona Góra showed the presence of 4 species of aerophytic cyanobacteria in the biological material sampled from the external building wall with visible biocorrosion: Gloeocapsa montana Kützing, Phormidium calcareum Kützing, Aphanothece saxicola Nägeli, Gloeothece caldariorum (P. Richter) Hollerbach. High levels of moisture were detected in the places of biofilm occurrence.

  5. Aerophytic Cyanobacteria as a Factor in the Biodegradation of Technical Materials on External Building Walls

    Science.gov (United States)

    Piontek, Marlena; Lechów, Hanna

    2014-12-01

    A study conducted at the Institute of Environmental Engineering, University of Zielona Góra showed the presence of 4 species of aerophytic cyanobacteria in the biological material sampled from the external building wall with visible biocorrosion: Gloeocapsa montana Kützing, Phormidium calcareum Kützing, Aphanothece saxicola Nägeli, Gloeothece caldariorum (P. Richter) Hollerbach. High levels of moisture were detected in the places of biofilm occurrence.

  6. Aerophytic Cyanobacteria as a Factor in the Biodegradation of Technical Materials on External Building Walls

    Directory of Open Access Journals (Sweden)

    Piontek Marlena

    2014-12-01

    Full Text Available A study conducted at the Institute of Environmental Engineering, University of Zielona Góra showed the presence of 4 species of aerophytic cyanobacteria in the biological material sampled from the external building wall with visible biocorrosion: Gloeocapsa montana Kützing, Phormidium calcareum Kützing, Aphanothece saxicola Nägeli, Gloeothece caldariorum (P. Richter Hollerbach. High levels of moisture were detected in the places of biofilm occurrence.

  7. External Tank Liquid Hydrogen (LH2) Prepress Regression Analysis Independent Review Technical Consultation Report

    Science.gov (United States)

    Parsons, Vickie s.

    2009-01-01

    The request to conduct an independent review of regression models, developed for determining the expected Launch Commit Criteria (LCC) External Tank (ET)-04 cycle count for the Space Shuttle ET tanking process, was submitted to the NASA Engineering and Safety Center NESC on September 20, 2005. The NESC team performed an independent review of regression models documented in Prepress Regression Analysis, Tom Clark and Angela Krenn, 10/27/05. This consultation consisted of a peer review by statistical experts of the proposed regression models provided in the Prepress Regression Analysis. This document is the consultation's final report.

  8. SUPPORTED CATALYST WITHOUT EXTERNAL ELECTRON DONOR FOR PROPYLENE POLYMERIZATION Ⅱ. TACTICITY DISTRIBUTION AND MICROSTRUCTURE OF POLYPROPYLENE

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Propylene was polymerized with a novel supported Ziegler-Natta catalyst containing 2,2-di-iso-butyl-1,3-dimethoxy-propane (DIBDMP) as internal donor and in the absence of external donor. The tacticity distribution of polypropylene was obtained by using temperature rising elution fractionation (TREF) technique and microstructure of fractions was studied with 13C-NMR. Compared with the catalyst without electron donor, this catalyst gives a considerably narrower tacticity distribution. Fractionation data demonstrate that DIBDMP shows better performance than aromatic diester DNBP (di-n-butyl phthalate). Chemically inverted propylene units and less stereoblockiness are found in the first fraction. Possible reasons for these were presented.

  9. Externalities associated with distributed generation of electric energy from biomass in the sugar cane industry; Externalidades associadas a geracao distribuida de energia eletrica a partir de biomassa na industria sucroalcooleira

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Jose Roberto; Coelho, Suani Teixeira; Almeida, Marcelo Costa; Pecora, Vanessa; Prado, Thiago Guilherme Ferreira [Centro Nacional de Referencia em Biomassa (CENBIO), Sao Paulo, SP (Brazil)

    2004-07-01

    The externalities related with projects of power generation, the cogeneration in the sugarcane industry including, traditionally are not present in the economic and technical evaluations that support decision making. Such fact implies in a distortion in the evaluation between traditional technologies and the ones based on renewable sources. The Brazilian sugarcane industry presents increasing potential for the participation in the segment of power generation. This study presents partial results from a work group project concerned on research of the externalities associated to the cogeneration using bagasse from sugar cane processing. Externalities are identified from the distributed generation consequences. The possibility of minimizing negative externalities from the sugarcane industry, caused by the production of sugar and alcohol, with positive externalities from the social benefits of distributed generation is the most important conclusion reached as so far. (author)

  10. Externalities associated with distributed generation of electric energy from biomass in the sugar cane industry; Externalidades associadas a geracao distribuida de energia eletrica a partir de biomassa na industria sucroalcooleira

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Jose Roberto; Coelho, Suani Teixeira; Almeida, Marcelo Costa; Pecora, Vanessa; Prado, Thiago Guilherme Ferreira [Centro Nacional de Referencia em Biomassa (CENBIO), Sao Paulo, SP (Brazil)

    2004-07-01

    The externalities related with projects of power generation, the cogeneration in the sugarcane industry including, traditionally are not present in the economic and technical evaluations that support decision making. Such fact implies in a distortion in the evaluation between traditional technologies and the ones based on renewable sources. The Brazilian sugarcane industry presents increasing potential for the participation in the segment of power generation. This study presents partial results from a work group project concerned on research of the externalities associated to the cogeneration using bagasse from sugar cane processing. Externalities are identified from the distributed generation consequences. The possibility of minimizing negative externalities from the sugarcane industry, caused by the production of sugar and alcohol, with positive externalities from the social benefits of distributed generation is the most important conclusion reached as so far. (author)

  11. Optimal External Wrench Distribution During a Multi-Contact Sit-to-Stand Task.

    Science.gov (United States)

    Bonnet, Vincent; Azevedo Coste, Christine; Robert, Thomas; Fraisse, Philippe; Venture, Gentiane

    2017-03-01

    This study aims at developing and evaluating a new practical method for the real-time estimate of joint torques and external wrenches during multi-contact sit-to-stand task using kinematics data only. The proposed method allows also identifying subject specific body inertial segment parameters that are required to perform inverse dynamics. The identification phase is performed using simple and repeatable motions. Thanks to an accurately identified model the estimate of the total external wrench can be used as an input to solve an under-determined multi-con-tact problem. It is solved using a constrained quadratic optimization process minimising a hybrid human-like energetic criterion. The weights of this hybrid cost function are adjusted and a sensitivity analysis is performed in order to reproduce robustly human external wrench distribution. The results showed that the pro-posed method could successfully estimate the external wrenches under buttocks, feet and hands during sit-to stand tasks (RMS error lower than 20 N and 6 N.m). The simplicity and generalisation abilities of the proposed method allow paving the way of future diagnosis solutions and rehabilitation applications, including in-home use.

  12. Simulation of external contamination into water distribution systems through defects in pipes

    Science.gov (United States)

    López, P. A.; Mora, J. J.; García, F. J.; López, G.

    2009-04-01

    Water quality can be defined as a set of properties (physical, biological and chemical) that determine its suitability for human use or for its role in the biosphere. In this contribution we focus on the possible impact on water distribution systems quality of external contaminant fluids entering through defects in pipes. The physical integrity of the distribution system is a primary barrier against the entry of external contaminants and the loss in quality of the treated drinking water, but this integrity can be broken. Deficiencies in physical and hydraulic integrity can lead into water losses, but also into the influx of contaminants through pipes walls, either through breaks coming from external subsoil waters, or via cross connections coming from sewerage or other facilities. These external contamination events (the so called pathogen intrusion phenomenon) can act as a source of income by introducing nutrients and sediments as well as decreasing disinfectant concentrations within the distribution system, thus resulting in a degradation of the distribution water quality. The objective of this contribution is to represent this pathogen intrusion phenomenon. The combination of presence of defects in the infrastructures (equipment failure), suppression and back-siphonage and lack of disinfection is the cause of propagation of contamination in the clean current of water. Intrusion of pathogenic microorganisms has been studied and registered even in well maintained services. Therefore, this situation can happen when negative pressure conditions are achieved in the systems combined with the presence of defects in pipes nearby the suppression. A simulation of the process by which the external fluids can come inside pipes across their defects in a steady-state situation will be considered, by using different techniques to get such a successful modeling, combining numerical and experimental simulations. The proposed modeling process is based on experimental and

  13. The surprising external upturn of the Blue Straggler radial distribution in M55

    CERN Document Server

    Lanzoni, B; Perina, S; Ferraro, F R; Rood, R T; Sollima, A

    2007-01-01

    By combining high-resolution HST and wide-field ground based observations, in ultraviolet and optical bands, we study the Blue Straggler Star (BSS) population of the low density galactic globular cluster M55 (NGC 6809) over its entire radial extent. The BSS projected radial distribution is found to be bimodal, with a central peak, a broad minimum at intermediate radii, and an upturn at large radii. Similar bimodal distributions have been found in other globular clusters (M3, 47 Tucanae, NGC 6752, M5), but the external upturn in M55 is the largest found to date. This might indicate a large fraction of primordial binaries in the outer regions of M55, which seems somehow in contrast with the relatively low (\\sim 10%) binary fraction recently measured in the core of this cluster.

  14. Distribution of inspiratory drive to the external intercostal muscles in humans

    Science.gov (United States)

    De Troyer, André; Gorman, Robert B; Gandevia, Simon C

    2003-01-01

    The external intercostal muscles in humans show marked regional differences in respiratory effect, and this implies that their action on the lung during breathing is primarily determined by the spatial distribution of neural drive among them. To assess this distribution, monopolar electrodes were implanted under ultrasound guidance in different muscle areas in six healthy individuals and electromyographic recordings were made during resting breathing. The muscles in the dorsal portion of the third and fifth interspace showed phasic inspiratory activity with each breath in every subject. However, the muscle in the ventral portion of the third interspace showed inspiratory activity in only three subjects, and the muscle in the dorsal portion of the seventh interspace was almost invariably silent. Also, activity in the ventral portion of the third interspace, when present, and activity in the dorsal portion of the fifth interspace were delayed relative to the onset of activity in the dorsal portion of the third interspace. In addition, the discharge frequency of the motor units identified in the dorsal portion of the third interspace averaged (mean ± s.e.m.) 11.9 ± 0.3 Hz and was significantly greater than the discharge frequency of the motor units in both the ventral portion of the third interspace (6.0 ± 0.5 Hz) and the dorsal portion of the fifth interspace (6.7 ± 0.4 Hz). The muscle in the dorsal portion of the third interspace started firing simultaneously with the parasternal intercostal in the same interspace, and the discharge frequency of its motor units was even significantly greater (11.4 ± 0.3 vs. 8.9 ± 0.2 Hz). These observations indicate that the distribution of neural inspiratory drive to the external intercostals in humans takes place along dorsoventral and rostrocaudal gradients and mirrors the spatial distribution of inspiratory mechanical advantage. PMID:12563017

  15. A Technical Approach on Large Data Distributed Over a Network

    Directory of Open Access Journals (Sweden)

    Suhasini G

    2011-12-01

    Full Text Available Data mining is nontrivial extraction of implicit, previously unknown and potential useful information from the data. For a database with number of records and for a set of classes such that each record belongs to one of the given classes, the problem of classification is to decide the class to which the given record belongs. The classification problem is also to generate a model for each class from given data set. We are going to make use of supervised classification in which we have training dataset of record, and for each record the class to which it belongs is known. There are many approaches to supervised classification. Decision tree is attractive in data mining environment as they represent rules. Rules can readily expressed in natural languages and they can be even mapped o database access languages. Now a days classification based on decision trees is one of the important problems in data mining   which has applications in many areas.  Now a days database system have become highly distributed, and we are using many paradigms. we consider the problem of inducing decision trees in a large distributed network of highly distributed databases. The classification based on decision tree can be done on the existence of distributed databases in healthcare and in bioinformatics, human computer interaction and by the view that these databases are soon to contain large amounts of data, characterized by its high dimensionality. Current decision tree algorithms would require high communication bandwidth, memory, and they are less efficient and scalability reduces when executed on such large volume of data. So there are some approaches being developed to improve the scalability and even approaches to analyse the data distributed over a network.[keywords: Data mining, Decision tree, decision tree induction, distributed data, classification

  16. Electronic document distribution: Design of the anonymous FTP Langley Technical Report Server

    Science.gov (United States)

    Nelson, Michael L.; Gottlich, Gretchen L.

    1994-01-01

    An experimental electronic dissemination project, the Langley Technical Report Server (LTRS), has been undertaken to determine the feasibility of delivering Langley technical reports directly to the desktops of researchers worldwide. During the first six months, over 4700 accesses occurred and over 2400 technical reports were distributed. This usage indicates the high level of interest that researchers have in performing literature searches and retrieving technical reports at their desktops. The initial system was developed with existing resources and technology. The reports are stored as files on an inexpensive UNIX workstation and are accessible over the Internet. This project will serve as a foundation for ongoing projects at other NASA centers that will allow for greater access to NASA technical reports.

  17. Distributed Item Review: Administrator User Guide. Technical Report #1603

    Science.gov (United States)

    Irvin, P. Shawn

    2016-01-01

    The Distributed Item Review (DIR) is a secure and flexible, web-based system designed to present test items to expert reviewers across a broad geographic area for evaluation of important dimensions of quality (e.g., alignment with standards, bias, sensitivity, and student accessibility). The DIR is comprised of essential features that allow system…

  18. Partially-Distributed Coordination with Reo (Technical Report)

    NARCIS (Netherlands)

    S.-S.T.Q. Jongmans (Sung-Shik); F. Santini (Francesco); F. Arbab (Farhad)

    2013-01-01

    htmlabstractCoordination languages, as Reo, have emerged for the specification and implementation of interaction protocols among concurrent entities. In this paper, we propose a framework for generating partially-distributed, partially-centralized implementations of Reo connectors to improve 1) buil

  19. Technical and Economic Assessment of the Implementation of Measures for Reducing Energy Losses in Distribution Systems

    Science.gov (United States)

    Aguila, Alexander; Wilson, Jorge

    2017-07-01

    This paper develops a methodology to assess a group of measures of electrical improvements in distribution systems, starting from the complementation of technical and economic criteria. In order to solve the problem of energy losses in distribution systems, technical and economic analysis was performed based on a mathematical model to establish a direct relationship between the energy saved by way of minimized losses and the costs of implementing the proposed measures. This paper aims at analysing the feasibility of reducing energy losses in distribution systems, by changing existing network conductors by larger crosssection conductors and distribution voltage change at higher levels. The impact of this methodology provides a highly efficient mathematical tool for analysing the feasibility of implementing improvement projects based on their costs which is a very useful tool for the distribution companies that will serve as a starting point to the analysis for this type of projects in distribution systems.

  20. Two regional regulatory meetings on distributed resources. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-02-01

    An overview and discussion of Eastern Regional and Western Regional State Utility Regulators Workshops on Distributed Resources (DR) is given. The purpose of the workshops was for state regulators to learn about DR and the regulatory issues surrounding their greater use. The following issues were addressed: introduction to DR technologies and their potential benefits, interconnection and market barriers, regulatory incentives, rate design issues, and environmental issues.

  1. Random walk with nonuniform angular distribution biased by an external periodic pulse

    Science.gov (United States)

    Acharyya, Aranyak

    2016-11-01

    We studied the motion of a random walker in two dimensions with nonuniform angular distribution biased by an external periodic pulse. Here, we analytically calculated the mean square displacement (end-to-end distance of a walk after n time steps), without bias and with bias. We determined the average x-component of the final displacement of the walker. Interestingly, we noted that for a particular periodicity of the bias, this average x-component of the final displacement becomes approximately zero. The average y-component of the final displacement is found to be zero for any perodicity of the bias, and its reason can be attributed to the nature of the probability density function of the angle (subtended by the displacement vector with the x-axis). These analytical results are also supported by computer simulations. The present study may be thought of as a model for arresting the bacterial motion (along a preferred direction) by an external periodic bias. This article will be useful for undergraduate students of physics, statistics and biology as an example of an interdisciplinary approach to understand a way to control bacterial motion.

  2. Working characteristics of external distributed feedback polymer lasers with varying waveguiding structures

    Science.gov (United States)

    Huang, Wenbin; Shen, Su; Pu, Donglin; Wei, Guojun; Ye, Yan; Peng, Changsi; Chen, Linsen

    2015-12-01

    We report the fabrication and characterization of second-order external distributed feedback (DFB) lasers based on blue-emitting polymer poly (9, 9-dioctyl-fluorene) (PFO). The relief grating prepared in the photo-resist layer on top of the gain medium was directly employed as the resonator. The effect of various structural parameters including the thickness of the active film, the thickness of the residue layer, and the depth of the relief grating on performance of these polymer lasers was investigated. An analytical approach based on the slab waveguiding theory and the Bragg condition was developed to accurately determine the lasing wavelength. We found that laser threshold increases monotonously as the thickness of the residue layer increases. The presence of the residue layer between the relief grating and the organic semiconductor layer weakens the strength of light coupling between the two layers, leading to a decreased gain for the specific lasing mode. The lowest laser threshold level of 80 μJ cm-2 was obtained when the thickness of the gain medium was around 250 nm, indicating an optimum balance between light feedback provided by the grating and optical amplification in the organic semiconductor. Our results not only provide insights into working mechanisms of external DFB polymer lasers, but also design rules for fabricating them.

  3. Robust Distributed Noise Reduction in Hearing Aids with External Acoustic Sensor Nodes

    Directory of Open Access Journals (Sweden)

    Marc Moonen

    2009-01-01

    Full Text Available The benefit of using external acoustic sensor nodes for noise reduction in hearing aids is demonstrated in a simulated acoustic scenario with multiple sound sources. A distributed adaptive node-specific signal estimation (DANSE algorithm, that has a reduced communication bandwidth and computational load, is evaluated. Batch-mode simulations compare the noise reduction performance of a centralized multi-channel Wiener filter (MWF with DANSE. In the simulated scenario, DANSE is observed not to be able to achieve the same performance as its centralized MWF equivalent, although in theory both should generate the same set of filters. A modification to DANSE is proposed to increase its robustness, yielding smaller discrepancy between the performance of DANSE and the centralized MWF. Furthermore, the influence of several parameters such as the DFT size used for frequency domain processing and possible delays in the communication link between nodes is investigated.

  4. Technical Data Exchange Software Tools Adapted to Distributed Microsatellite Design

    Science.gov (United States)

    Pache, Charly

    2002-01-01

    One critical issue concerning distributed design of satellites, is the collaborative work it requires. In particular, the exchange of data between each group responsible for each subsystem can be complex and very time-consuming. The goal of this paper is to present a design collaborative tool, the SSETI Design Model (SDM), specifically developed for enabling satellite distributed design. SDM is actually used in the ongoing Student Space Exploration &Technology (SSETI) initiative (www.sseti.net). SSETI is lead by European Space Agency (ESA) outreach office (http://www.estec.esa.nl/outreach), involving student groups from all over Europe for design, construction and launch of a microsatellite. The first part of this paper presents the current version of the SDM tool, a collection of Microsoft Excel linked worksheets, one for each subsystem. An overview of the project framework/structure is given, explaining the different actors, the flows between them, as well as the different types of data and the links - formulas - between data sets. Unified Modeling Language (UML) diagrams give an overview of the different parts . Then the SDM's functionalities, developed in VBA scripts (Visual Basic for Application), are introduced, as well as the interactive features, user interfaces and administration tools. The second part discusses the capabilities and limitations of SDM current version. Taking into account these capabilities and limitations, the third part outlines the next version of SDM, a web-oriented, database-driven evolution of the current version. This new approach will enable real-time data exchange and processing between the different actors of the mission. Comprehensive UML diagrams will guide the audience through the entire modeling process of such a system. Tradeoffs simulation capabilities, security, reliability, hardware and software issues will also be thoroughly discussed.

  5. Parallel distributed processing: Implications for cognition and development. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    McClelland, J.L.

    1988-07-11

    This paper provides a brief overview of the connectionist or parallel distributed processing framework for modeling cognitive processes, and considers the application of the connectionist framework to problems of cognitive development. Several aspects of cognitive development might result from the process of learning as it occurs in multi-layer networks. This learning process has the characteristic that it reduces the discrepancy between expected and observed events. As it does this, representations develop on hidden units which dramatically change both the way in which the network represents the environment from which it learns and the expectations that the network generates about environmental events. The learning process exhibits relatively abrupt transitions corresponding to stage shifts in cognitive development. These points are illustrated using a network that learns to anticipate which side of a balance beam will go down, based on the number of weights on each side of the fulcrum and their distance from the fulcrum on each side of the beam. The network is trained in an environment in which weight more frequently governs which side will go down. It recapitulates the states of development seen in children, as well as the stage transitions, as it learns to represent weight and distance information.

  6. Final Technical Report: Distributed Controls for High Penetrations of Renewables

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, Raymond H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neely, Jason C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rashkin, Lee J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Trudnowski, Daniel J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wilson, David G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The goal of this effort was to apply four potential control analysis/design approaches to the design of distributed grid control systems to address the impact of latency and communications uncertainty with high penetrations of photovoltaic (PV) generation. The four techniques considered were: optimal fixed structure control; Nyquist stability criterion; vector Lyapunov analysis; and Hamiltonian design methods. A reduced order model of the Western Electricity Coordinating Council (WECC) developed for the Matlab Power Systems Toolbox (PST) was employed for the study, as well as representative smaller systems (e.g., a two-area, three-area, and four-area power system). Excellent results were obtained with the optimal fixed structure approach, and the methodology we developed was published in a journal article. This approach is promising because it offers a method for designing optimal control systems with the feedback signals available from Phasor Measurement Unit (PMU) data as opposed to full state feedback or the design of an observer. The Nyquist approach inherently handles time delay and incorporates performance guarantees (e.g., gain and phase margin). We developed a technique that works for moderate sized systems, but the approach does not scale well to extremely large system because of computational complexity. The vector Lyapunov approach was applied to a two area model to demonstrate the utility for modeling communications uncertainty. Application to large power systems requires a method to automatically expand/contract the state space and partition the system so that communications uncertainty can be considered. The Hamiltonian Surface Shaping and Power Flow Control (HSSPFC) design methodology was selected to investigate grid systems for energy storage requirements to support high penetration of variable or stochastic generation (such as wind and PV) and loads. This method was applied to several small system models.

  7. Solid waste sampling and distribution project. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-29

    The United States Department of Energy (DOE) established a Waste Management Program within the Office of Fossil Energy. A key goal of this program is to ensure that waste management issues do not become obstacles to the commercialization of advanced coal utilization technologies. In achieving this goal, the Waste Management Program identifies various emerging coal utilization technologies and performs comprehensive characterizations of the waste streams and products. The characterizations include engineering assessments to define waste streams of interest/potential concern, field studies to collect samples of the waste, and complete chemical analysis of the collected samples. Energy and Environmental Research Corporation (EER) was selected to perform the site selection and the sampling aspects of five (5) of these facilities. The current EER contract consists of two interrelated efforts: site selection and waste sampling. Detailed sample analysis is being conducted under another DOE contract. The primary objectives of the site selection and sampling effort are listed: (1) Survey sites at which advanced fossil energy combustion technologies are being operated, and identify five sites for sampling. Priority should be given to DOE Clean Coal Technology (CCT) Program Sites. (2) Identify candidate solid waste streams in advanced coal utilization processes likely to present disposal problems and prioritized them for sampling at selected sites. (3) Contact site personnel for site access, sample the streams representatively and document them according to established methodology and known process conditions; and (4) Distribute the samples to DOE`s Morgantown Energy Technology Center or their representatives for analysis and report on the site visit.

  8. Program distribution for unclassified scientific and technical reports: Instructions and category scope notes: Revision 75

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, W.F. Jr.; Amburn, D. (eds.)

    1989-08-01

    The DOE Office of Scientific and Technical Information (OSTI) in conjunction with DOE Program Offices establishes distribution categories for research, development, and technological reports emanating from DOE programs. The revised category numbers and scope notes contained in this publication were coordinated between OSTI and DOE Program Offices with input from DOE Field Offices. Decisions regarding whether reports will be distributed are made by Program Offices in conjunction with DOE Field Offices and OSTI. This revision of DOE/OSTI-4500 contains the revised distribution category numbers and scope notes along with the printed copy requirement, which shows the number of copies required to make program distribution.

  9. Survey on Log-Normally Distributed Market-Technical Trend Data

    Directory of Open Access Journals (Sweden)

    René Brenner

    2016-07-01

    Full Text Available In this survey, a short introduction of the recent discovery of log-normally-distributed market-technical trend data will be given. The results of the statistical evaluation of typical market-technical trend variables will be presented. It will be shown that the log-normal assumption fits better to empirical trend data than to daily returns of stock prices. This enables one to mathematically evaluate trading systems depending on such variables. In this manner, a basic approach to an anti-cyclic trading system will be given as an example.

  10. Characteristics and Distribution of Mandibular Fractures Due to External Causes: A Retrospective Study

    Directory of Open Access Journals (Sweden)

    Dmitry José de Santana SARMENTO

    2007-05-01

    Full Text Available Purpose: To investigate the characteristics and distribution of the cases of mandibular fractures due to external causes treated at the Hospital Regional de Campina Grande, PB, Brazil, between January 2002 and December 2006. Method: For such purpose, an indirect review of 691 medical-hospital patient files of the Service of Oral and Maxillofacial Surgery were reviewed. A total of 59 (8.5% files referred to mandibular fracture victims. The following variables were analyzed: gender, age range, time of occurrence (date and hour, etiology, presence of associated fractures, type of treatment and time of hospitalization. Results: The results showed that males were more frequently affected than females (83.1%, with predominance in the 21-30 age range (40.7%. Most cases were treated on Saturdays and Sundays (40.6% and at night (30.5%. Falls, (28.8%, interpersonal violence (23.7% and motorcycle accidents (23.7% were the main etiologies. Five patients (8.5% presented fractures in other facial bones and the most frequent treatment was the intermaxillary retention with stainless steel wire (50.8%. The mean hospitalization time was 5.28 days.Conclusions: The prevalence of mandibular fractures is higher in the male gender, during the third decade of life; falls were the main etiologic factor and most cases occurred during the weekend.

  11. Distributed fiber optic sensors embedded in technical textiles for structural health monitoring

    Science.gov (United States)

    Krebber, Katerina; Lenke, Philipp; Liehr, Sascha; Noether, Nils; Wendt, Mario; Wosniok, Aleksander

    2010-09-01

    Technical textiles with embedded distributed fiber optic sensors have been developed for the purposes of structural health monitoring in geotechnical and civil engineering. The distributed fiber optic sensors are based on Brillouin scattering in silica optical fibers and OTDR in polymer optical fibers. Such "smart" technical textiles can be used for reinforcement of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, structural health monitoring of critical geotechnical and civil infrastructures can be realized. The paper highlights the results achieved in this innovative field in the framework of several German and European projects.

  12. Technical change and efficiency measures. The post-privatisation in the gas distribution sector in Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, M.A. [Centro de Estudios Economicos de la Regulacion, Instituto de Economia, UADE, Buenos Aires (Argentina)

    2001-05-01

    In this paper we use a stochastic frontier approach to analyse the technical change in the post-privatisation period in the gas distribution sector in Argentina. We found that there is both a catching up effect and a shift in the frontier, which shows that the sector as a whole improved its efficiency in the reviewed period. Moreover, this phenomenon holds not only for the average but also for every firm in the sample.

  13. Knowledge-based prediction of three-dimensional dose distributions for external beam radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Shiraishi, Satomi; Moore, Kevin L., E-mail: kevinmoore@ucsd.edu [Department of Radiation Medicine and Applied Sciences, University of California, San Diego, La Jolla, California 92093 (United States)

    2016-01-15

    Purpose: To demonstrate knowledge-based 3D dose prediction for external beam radiotherapy. Methods: Using previously treated plans as training data, an artificial neural network (ANN) was trained to predict a dose matrix based on patient-specific geometric and planning parameters, such as the closest distance (r) to planning target volume (PTV) and organ-at-risks (OARs). Twenty-three prostate and 43 stereotactic radiosurgery/radiotherapy (SRS/SRT) cases with at least one nearby OAR were studied. All were planned with volumetric-modulated arc therapy to prescription doses of 81 Gy for prostate and 12–30 Gy for SRS. Using these clinically approved plans, ANNs were trained to predict dose matrix and the predictive accuracy was evaluated using the dose difference between the clinical plan and prediction, δD = D{sub clin} − D{sub pred}. The mean (〈δD{sub r}〉), standard deviation (σ{sub δD{sub r}}), and their interquartile range (IQR) for the training plans were evaluated at a 2–3 mm interval from the PTV boundary (r{sub PTV}) to assess prediction bias and precision. Initially, unfiltered models which were trained using all plans in the cohorts were created for each treatment site. The models predict approximately the average quality of OAR sparing. Emphasizing a subset of plans that exhibited superior to the average OAR sparing during training, refined models were created to predict high-quality rectum sparing for prostate and brainstem sparing for SRS. Using the refined model, potentially suboptimal plans were identified where the model predicted further sparing of the OARs was achievable. Replans were performed to test if the OAR sparing could be improved as predicted by the model. Results: The refined models demonstrated highly accurate dose distribution prediction. For prostate cases, the average prediction bias for all voxels irrespective of organ delineation ranged from −1% to 0% with maximum IQR of 3% over r{sub PTV} ∈ [ − 6, 30] mm. The

  14. Integration of FDG-PET/CT into external beam radiation therapy planning Technical aspects and recommendations on methodological approaches

    NARCIS (Netherlands)

    Thorwarth, D.; Beyer, T.; Boellaard, R.; De Ruysscher, D.; Grgic, A.; Lee, J. A.; Pietrzyk, U.; Sattler, B.; Schaefer, A.; van Elmpt, W.; Vogel, W.; Oyen, W. J. G.; Nestle, U.

    2012-01-01

    This work addresses the clinical adoption of FDG-PET/CT for image-guided radiation therapy planning (RIP). As such, important technical and methodological aspects of PET/CT-based RIP are reviewed and practical recommendations are given for routine patient management and clinical studies. First, rece

  15. Integration of FDG-PET/CT into external beam radiation therapy planning. Technical aspects and recommendations on methodological approaches.

    NARCIS (Netherlands)

    Thorwarth, D.; Beyer, T.; Boellaard, R.; Ruysscher, D. de; Grgic, A.; Lee, J.A.; Pietrzyk, U.; Sattler, B.; Schaefer, A.; Elmpt, W. van; Vogel, W.; Oyen, W.J.G.; Nestle, U.

    2012-01-01

    This work addresses the clinical adoption of FDG-PET/CT for image-guided radiation therapy planning (RTP). As such, important technical and methodological aspects of PET/CT-based RTP are reviewed and practical recommendations are given for routine patient management and clinical studies. First, rece

  16. Distribution of DVB-C Channels over an Externally Modulated Optical Link

    Science.gov (United States)

    Andrade, Paulo; Lima, Mário; Teixeira, António

    2012-03-01

    In this paper, we will study, via simulation, the transmission of DVB-C channels over an external modulated optical link using a Mach-Zehnder modulator (MZM). We will also observe the consequences of biasing the MZM near its transmission minimum point, which allows higher carrier to noise ratio at the transmitter, but increases second-order distortion at the receiver.

  17. Active Control of Thermostatic Loads for Economic and Technical Support to Distribution Grids

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Mendaza, Iker Diaz de Cerio; Bak-Jensen, Birgitte

    2016-01-01

    Active control of electric water heaters (EWHs) is presented in this paper as a means of exploiting demand flexibility for supporting low-voltage (LV) distribution grids. A single-node model of an EWH is implemented in DIgSILENT PowerFactory using a thermal energy balancing equation and three...... of the energy band is done based on feeder loading to respect thermal grid constraints. Finally, a voltage-based control is implemented to provide real-time voltage support to the LV grids. Simulation results demonstrate the capability of the presented method to realize both economic and technical advantages...

  18. Data-driven planning of distributed energy resources amidst socio-technical complexities

    Science.gov (United States)

    Jain, Rishee K.; Qin, Junjie; Rajagopal, Ram

    2017-08-01

    New distributed energy resources (DER) are rapidly replacing centralized power generation due to their environmental, economic and resiliency benefits. Previous analyses of DER systems have been limited in their ability to account for socio-technical complexities, such as intermittent supply, heterogeneous demand and balance-of-system cost dynamics. Here we develop ReMatch, an interdisciplinary modelling framework, spanning engineering, consumer behaviour and data science, and apply it to 10,000 consumers in California, USA. Our results show that deploying DER would yield nearly a 50% reduction in the levelized cost of electricity (LCOE) over the status quo even after accounting for socio-technical complexities. We abstract a detailed matching of consumers to DER infrastructure from our results and discuss how this matching can facilitate the development of smart and targeted renewable energy policies, programmes and incentives. Our findings point to the large-scale economic and technical feasibility of DER and underscore the pertinent role DER can play in achieving sustainable energy goals.

  19. Effect of external surface of HZSM-5 zeolite on product distribution in the conversion of methanol to hydrocarbons

    Institute of Scientific and Technical Information of China (English)

    Junhui Li; Yanan Wang; Wenzhi Jia; Zhiwen Xi; Huanhui Chen; Zhirong Zhu∗; Zhonghua Hu

    2014-01-01

    The external surface of HZSM-5 zeolite was passivated by liquid siliceous deposition and by acidic sites poisoning with lepidine, respectively. Then methanol-to-hydrocarbons (MTH) reaction was investigated over the above as-prepared catalysts and the dissoluble coke on these used catalysts was analyzed by GC-MS, to study the role of the external surface of HZSM-5 in the catalytic reaction. Comparison with the experi-mental results based on parent ZSM-5 showed that the product distribution of MTH reaction was obviously influenced by the external surface. Evidences were listed as follows:(1) the final product on parent HZSM-5 showed higher aromatic selectivity, lower olefin selectivity, lower ra-tio of C2/C3+aliphatics and higher ratio of C3/C4+aliphatics than the reaction mixture produced by the sole catalysis of acidic sites in HZSM-5 channel;(2) a little of pentamethylbenzene and hexamethylbenzene in the product on parent HZSM-5, was produced via multi-methylation of methylbenzene on the external surface. The above conclusion may also be suitable for MTH reaction over other zeolites with 10-ring channel.

  20. Distributed, explicit modeling of technical snow production and ski area management with the hydroclimatological model AMUNDSEN

    Science.gov (United States)

    Hanzer, Florian; Marke, Thomas; Strasser, Ulrich

    2016-04-01

    In this presentation, a module for simulating technical snow production in ski areas coupled to the spatially distributed physically based hydroclimatological model AMUNDSEN is presented. The module explicitly considers individual snow guns and distributes the produced snow along the slopes. The amount of snow produced by each device is a function of its type, of wet-bulb temperature at the location, of ski area infrastructure (in terms of water supply and pumping capacity), and of snow demand. An empirical rule in the modeling for snow production, derived from common snowmaking practices, splits the winter season into a period of maximum snowmaking and a successive period of selective on-demand snowmaking. The model is exemplarily set up for a ski area in the Schladming region (Austrian Alps) using actual snowmaking infrastructure data. Integration of these data as model variables, as well as stakeholder-defined indicators and thresholds, have been implemented as defined interfaces in a coupled component model architecture. Comparison of the model results with recordings of snowmaking operation and satellite-derived snow cover maps indicate that the model is capable of accurately simulating the real-world snowmaking practice, and the combined natural and technical snow conditions on the slopes. The explicit consideration of individual snow guns and ski area infrastructure makes the model a valuable tool for scenario applications, e.g. to assess the effects of different ski area management strategies and changes in snowmaking infrastructure for climate change impact studies.

  1. Influence of external white noise on the formation of Tsallis' velocity distribution function: A molecular dynamics study

    Science.gov (United States)

    Nouri Kadijani, M.; Abbasi, H.

    2016-09-01

    Dynamics of a dust layer suspending in a plasma and interacting through a Yukawa-type potential is considered. In the small affinity limit, the influence of an external white noise on the formation of Tsallis' velocity distribution function is studied through molecular dynamics simulation. The characteristic length of the noise is much smaller than the system size that causes a number of subsystems (islands) to be formed with the size similar to the noise one. The external noise leads to the temperature fluctuation in each island. Therefore, a stochastic formalism based on a Langevin equation for the fluctuating temperature is presented. The approach provides a dynamical reason how a fluctuating temperature takes a system to a unique class of quasi-equilibrium states. In particular, the dependence of the model systems on the noise parameters is explained. The non-extensive parameter is obtained through which the small affinity limit can be defined.

  2. Distributed Coordination Control of First- and Second-Order Multiagent Systems with External Disturbances

    Directory of Open Access Journals (Sweden)

    Lipo Mo

    2015-01-01

    Full Text Available This paper is devoted to the coordination control problem of heterogeneous first- and second-order multiagent systems with external disturbances. First, by applying the theory of eigenvalue and the method of model transformation, the consensus state of heterogeneous multiagent systems is obtained. Then, based on the consensus state, the control output is defined, and sufficient conditions are derived to make all agents reach consensus with H∞ performance. Finally, simulation results are provided to demonstrate the effectiveness of the presented results.

  3. CLASSIFICATION OF TECHNICAL MEANS FOR PREPARATION AND DISTRIBUTION OF FEED MIXTURES AT SMALL CATTLE FARMS

    Directory of Open Access Journals (Sweden)

    Frolov V. Y.

    2015-12-01

    Full Text Available To increase the productivity of the cattle it is demanded simultaneous distribution of all types of animal feed in the form of balanced feed mixture with a given nutritional value. Balanced feeding of animals can improve their productivity, reduce feed wastage, and include alternative components of feed mixtures in their diets, which have nourishing properties and high digestibility; make and adjust feeding rations. Researches conducted by Russian and foreign scientists, proved the prospects of full feeding of complete feed mixtures, which allow to increase the productivity of animals to 9-30 % and reduce the feed consumption in the calculation of 1 с of milk by 7-8 %. The composition of complete feed mixtures includes sunflower cake, silage, root crops and forage. The process of preparation and distribution of feeds for large horned livestock is the issue of all the necessary components of the feed mixture with a given nutritional value. Saturation of the feed product with extra energy goes during its interaction with the working bodies of technical means for preparation and distribution (TMPD of different types of food. For preparation and distribution of components of the feed mixture it is necessary to have following facilities, provided with reducing energy intensity and improving the qualitative indicators of processes: for grinding beet fodder and sunflower cake we need disk shredders; for shredding silage and roughage – bearnie and rotor shredders, respectively; for dispensing of beet fodder and sunflower cake – belt conveyor, for dispensing silage and roughage we use disc and drum dispensers, respectively; for mixing sunflower cake - rotary mixers, and for silage, beet fodder and for-age we may use paddle mixers; for distribution of sunflower cake we use rotary feeders, for silage and beet fodder – bin distributors, and for coarse feed we should use conveyor dispensers

  4. Distribution of electrical activation to the external intercostal muscles during high frequency spinal cord stimulation in dogs

    Science.gov (United States)

    DiMarco, Anthony F; Kowalski, Krzysztof E

    2011-01-01

    Abstract In contrast to previous methods of electrical stimulation of the inspiratory muscles, high frequency spinal cord stimulation (HF-SCS) results in more physiological activation of these muscles. The spatial distribution of activation to the external intercostal muscles by this method is unknown. In anaesthetized dogs, multiunit and single motor unit (SMU) EMG activity was monitored in the dorsal portion of the 3rd, 5th and 7th interspaces and ventral portion of the 3rd interspace during spontaneous breathing and HF-SCS following C2 spinal section. Stimulus amplitude during HF-SCS was adjusted such that inspired volumes matched spontaneous breathing (Protocol 1). During HF-SCS, mean peak SMU firing frequency was highest in the 3rd interspace (dorsal) (18.8 ± 0.3 Hz) and significantly lower in the 3rd interspace (ventral) (12.2 ± 0.2 Hz) and 5th interspace (dorsal) (15.3 ± 0.3 Hz) (P intercostal muscles during HF-SCS is similar to that occurring during spontaneous breathing and (b) differential descending synaptic input from supraspinal centres is not a required component of the differential spatial distribution of external intercostal muscle activation. HF-SCS may provide a more physiological method of inspiratory muscle pacing. PMID:21242258

  5. Simple wealth distribution model causing inequality-induced crisis without external shocks

    Science.gov (United States)

    Benisty, Henri

    2017-05-01

    We address the issue of the dynamics of wealth accumulation and economic crisis triggered by extreme inequality, attempting to stick to most possibly intrinsic assumptions. Our general framework is that of pure or modified multiplicative processes, basically geometric Brownian motions. In contrast with the usual approach of injecting into such stochastic agent models either specific, idiosyncratic internal nonlinear interaction patterns or macroscopic disruptive features, we propose a dynamic inequality model where the attainment of a sizable fraction of the total wealth by very few agents induces a crisis regime with strong intermittency, the explicit coupling between the richest and the rest being a mere normalization mechanism, hence with minimal extrinsic assumptions. The model thus harnesses the recognized lack of ergodicity of geometric Brownian motions. It also provides a statistical intuition to the consequences of Thomas Piketty's recent "r >g " (return rate > growth rate) paradigmatic analysis of very-long-term wealth trends. We suggest that the "water-divide" of wealth flow may define effective classes, making an objective entry point to calibrate the model. Consistently, we check that a tax mechanism associated to a few percent relative bias on elementary daily transactions is able to slow or stop the build-up of large wealth. When extreme fluctuations are tamed down to a stationary regime with sizable but steadier inequalities, it should still offer opportunities to study the dynamics of crisis and the inner effective classes induced through external or internal factors.

  6. Final Technical Report Power through Policy: "Best Practices" for Cost-Effective Distributed Wind

    Energy Technology Data Exchange (ETDEWEB)

    Rhoads-Weaver, Heather; Gagne, Matthew; Sahl, Kurt; Orrell, Alice; Banks, Jennifer

    2012-02-28

    Power through Policy: 'Best Practices' for Cost-Effective Distributed Wind is a U.S. Department of Energy (DOE)-funded project to identify distributed wind technology policy best practices and to help policymakers, utilities, advocates, and consumers examine their effectiveness using a pro forma model. Incorporating a customized feed from the Database of State Incentives for Renewables and Efficiency (DSIRE), the Web-based Distributed Wind Policy Comparison Tool (Policy Tool) is designed to assist state, local, and utility officials in understanding the financial impacts of different policy options to help reduce the cost of distributed wind technologies. The project's final products include the Distributed Wind Policy Comparison Tool, found at www.windpolicytool.org, and its accompanying documentation: Distributed Wind Policy Comparison Tool Guidebook: User Instructions, Assumptions, and Case Studies. With only two initial user inputs required, the Policy Tool allows users to adjust and test a wide range of policy-related variables through a user-friendly dashboard interface with slider bars. The Policy Tool is populated with a variety of financial variables, including turbine costs, electricity rates, policies, and financial incentives; economic variables including discount and escalation rates; as well as technical variables that impact electricity production, such as turbine power curves and wind speed. The Policy Tool allows users to change many of the variables, including the policies, to gauge the expected impacts that various policy combinations could have on the cost of energy (COE), net present value (NPV), internal rate of return (IRR), and the simple payback of distributed wind projects ranging in size from 2.4 kilowatts (kW) to 100 kW. The project conducted case studies to demonstrate how the Policy Tool can provide insights into 'what if' scenarios and also allow the current status of incentives to be examined or defended when

  7. Unbalanced Michelson's interferometer as a fiber optic distributed sensor of external signals

    Science.gov (United States)

    Chojnacki, M.; Szustakowski, Mieczyslaw; Zyczkowski, Marek

    2001-08-01

    The subject of this work is a novel fiber optic distributed sensor system. The system uses a technique called multiplexed reflectometric interferometry to measure dynamic strain in a network of single mode optical fiber sensors. The sensor is constructed on unbalanced fiber optic Michelson's interferometer is activated by series of double pulse. The time interval between those pulses depends on the length of the section of sensor. Acousto-optical modulator acts as an optical frequency shifter. A change in a frequency of electrical pulses exciting the modulator result in a frequency shift in each generated wave packet.

  8. Distributed Time-Varying Formation Robust Tracking for General Linear Multiagent Systems With Parameter Uncertainties and External Disturbances.

    Science.gov (United States)

    Hua, Yongzhao; Dong, Xiwang; Li, Qingdong; Ren, Zhang

    2017-05-18

    This paper investigates the time-varying formation robust tracking problems for high-order linear multiagent systems with a leader of unknown control input in the presence of heterogeneous parameter uncertainties and external disturbances. The followers need to accomplish an expected time-varying formation in the state space and track the state trajectory produced by the leader simultaneously. First, a time-varying formation robust tracking protocol with a totally distributed form is proposed utilizing the neighborhood state information. With the adaptive updating mechanism, neither any global knowledge about the communication topology nor the upper bounds of the parameter uncertainties, external disturbances and leader's unknown input are required in the proposed protocol. Then, in order to determine the control parameters, an algorithm with four steps is presented, where feasible conditions for the followers to accomplish the expected time-varying formation tracking are provided. Furthermore, based on the Lyapunov-like analysis theory, it is proved that the formation tracking error can converge to zero asymptotically. Finally, the effectiveness of the theoretical results is verified by simulation examples.

  9. Simultaneous reconstruction of emission activity and attenuation coefficient distribution from TOF data, acquired with external transmission source.

    Science.gov (United States)

    Panin, V Y; Aykac, M; Casey, M E

    2013-06-07

    The simultaneous PET data reconstruction of emission activity and attenuation coefficient distribution is presented, where the attenuation image is constrained by exploiting an external transmission source. Data are acquired in time-of-flight (TOF) mode, allowing in principle for separation of emission and transmission data. Nevertheless, here all data are reconstructed at once, eliminating the need to trace the position of the transmission source in sinogram space. Contamination of emission data by the transmission source and vice versa is naturally modeled. Attenuated emission activity data also provide additional information about object attenuation coefficient values. The algorithm alternates between attenuation and emission activity image updates. We also proposed a method of estimation of spatial scatter distribution from the transmission source by incorporating knowledge about the expected range of attenuation map values. The reconstruction of experimental data from the Siemens mCT scanner suggests that simultaneous reconstruction improves attenuation map image quality, as compared to when data are separated. In the presented example, the attenuation map image noise was reduced and non-uniformity artifacts that occurred due to scatter estimation were suppressed. On the other hand, the use of transmission data stabilizes attenuation coefficient distribution reconstruction from TOF emission data alone. The example of improving emission images by refining a CT-based patient attenuation map is presented, revealing potential benefits of simultaneous CT and PET data reconstruction.

  10. A novel approach for generating flat optical frequency comb based on externally injected gain-switching distributed feedback semiconductor laser

    Science.gov (United States)

    Zhu, Huatao; Wang, Rong; Pu, Tao; Xiang, Peng; Zheng, Jilin; Fang, Tao

    2017-02-01

    In this paper, a novel approach for generating flat optical frequency comb (OFC) based on externally injected gain-switched distributed feedback (DFB) semiconductor laser is proposed and experimentally demonstrated. In the proposed system, the flatness, the number of OFC spectral lines, and the spectral line to background noise ratio can be tuned to their optimized values by adjusting the current of the modulation signal, the injection ratio and the detuning frequency. Since the frequency of the modulation signal decides the frequency spacing of the output spectral lines, OFC spectral lines of different spacing can be achieved. In the experiment, 10 spectral lines with 1.5 dB power variation are demonstrated to verify the proposed approach. In addition, the expansion of the spectral line is investigated.

  11. Scaling Techniques for Massive Scale-Free Graphs in Distributed (External) Memory

    KAUST Repository

    Pearce, Roger

    2013-05-01

    We present techniques to process large scale-free graphs in distributed memory. Our aim is to scale to trillions of edges, and our research is targeted at leadership class supercomputers and clusters with local non-volatile memory, e.g., NAND Flash. We apply an edge list partitioning technique, designed to accommodate high-degree vertices (hubs) that create scaling challenges when processing scale-free graphs. In addition to partitioning hubs, we use ghost vertices to represent the hubs to reduce communication hotspots. We present a scaling study with three important graph algorithms: Breadth-First Search (BFS), K-Core decomposition, and Triangle Counting. We also demonstrate scalability on BG/P Intrepid by comparing to best known Graph500 results. We show results on two clusters with local NVRAM storage that are capable of traversing trillion-edge scale-free graphs. By leveraging node-local NAND Flash, our approach can process thirty-two times larger datasets with only a 39% performance degradation in Traversed Edges Per Second (TEPS). © 2013 IEEE.

  12. A high-order external distributed feedback polymer laser with low working threshold

    Science.gov (United States)

    Huang, Wenbin; Pu, Donglin; Yang, Xiaofei; Wei, Guojun; Fang, Zongbao; Zhou, Xiaohong; Qiao, Wen; Chen, Linsen

    2016-05-01

    In this paper, we report a high-order distributed feedback (DFB) polymer laser with low working threshold. Using the high-order grating increases the lithographic tolerances, providing coherent light sources that are more amenable to mass-manufacturing techniques, such as laser direct writing lithography and roll-to-roll processing. To enable high-order DFB lasing, an unconventional working configuration is designed in which the grating is situated on top of the uniform conjugated polymer film. In addition, a novel Forster energy transfer blend of two conjugated polymers is used as the gain medium. Upon pumping, the device emits lasing around 603.6 nm with a bandwidth of 0.5 nm. The threshold is around 20.5 μJ cm-2 (~2.56 kW cm-2), about to enter the regime of inexpensive LED pumping. A further increase in pump energy results in simultaneous oscillations at the 29th and 30th Bragg orders. Operating principles of the high-order DFB polymer laser, including spectral performance and threshold dependence on pump length, are investigated. This approach represents a step towards low-cost, even ‘disposable’ polymer lasers.

  13. Methodology aggregated to technical losses evaluation in distribution systems; Metodologia agregada para avaliacao de perdas tecnicas em sistemas de distribuicao

    Energy Technology Data Exchange (ETDEWEB)

    Hashimoto, Kleber; Gouvea, Marcos Roberto [Comissao de Servicos Publicos de Energia (CSPE), Sao Paulo, SP (Brazil); Maliuk, Igor Rafaelievich Perez; Tahan, Carlos Marcio Vieira [Universidade de Sao Paulo (EPUSP), SP (Brazil). Escola Politecnica

    2000-07-01

    This work proposes an aggregated methodology for the evaluation of the technical losses in distribution networks, based on statistical methods and complemented by deterministic simplified methods, taking into account the compromise between precision in the results and quantity of necessary data.

  14. Conventional and conformal technique of external beam radiotherapy in locally advanced cervical cancer: Dose distribution, tumor response, and side effects

    Science.gov (United States)

    Mutrikah, N.; Winarno, H.; Amalia, T.; Djakaria, M.

    2017-08-01

    The objective of this study was to compare conventional and conformal techniques of external beam radiotherapy (EBRT) in terms of the dose distribution, tumor response, and side effects in the treatment of locally advanced cervical cancer patients. A retrospective cohort study was conducted on cervical cancer patients who underwent EBRT before brachytherapy in the Radiotherapy Department of Cipto Mangunkusumo Hospital. The prescribed dose distribution, tumor response, and acute side effects of EBRT using conventional and conformal techniques were investigated. In total, 51 patients who underwent EBRT using conventional techniques (25 cases using Cobalt-60 and 26 cases using a linear accelerator (LINAC)) and 29 patients who underwent EBRT using conformal techniques were included in the study. The distribution of the prescribed dose in the target had an impact on the patient’s final response to EBRT. The complete response rate of patients to conformal techniques was significantly greater (58%) than that of patients to conventional techniques (42%). No severe acute local side effects were seen in any of the patients (Radiation Therapy Oncology Group (RTOG) grades 3-4). The distribution of the dose and volume to the gastrointestinal tract affected the proportion of mild acute side effects (RTOG grades 1-2). The urinary bladder was significantly greater using conventional techniques (Cobalt-60/LINAC) than using conformal techniques at 72% and 78% compared to 28% and 22%, respectively. The use of conformal techniques in pelvic radiation therapy is suggested in radiotherapy centers with CT simulators and 3D Radiotherapy Treatment Planning Systems (RTPSs) to decrease some uncertainties in radiotherapy planning. The use of AP/PA pelvic radiation techniques with Cobalt-60 should be limited in body thicknesses equal to or less than 18 cm. When using conformal techniques, delineation should be applied in the small bowel, as it is considered a critical organ according to RTOG

  15. Generation and distribution of a wide-band continuously tunable millimeter-wave signal with an optical external modulation technique

    Science.gov (United States)

    Qi, Guohua; Yao, Jianping; Seregelyi, J.; Paquet, S.; Belisle, C.

    2005-10-01

    A new technique to generate and distribute a wide-band continuously tunable millimeter-wave signal using an optical external modulator and a wavelength-fixed optical notch filter is proposed. The optical intensity modulator is biased to suppress the odd-order optical sidebands. The wavelength-fixed optical notch filter is then used to filter out the optical carrier. Two second-order optical sidebands are obtained at the output of the notch filter. A millimeter-wave signal that has four times the frequency of the microwave drive signal is generated by beating the two second-order optical sidebands at a photodetector. Since no tunable optical filter is used, the system is easy to implement. A system using an LiNbO3 intensity modulator and a fiber Bragg grating filter is built. A stable and high spectral purity millimeter-wave signal tunable from 32 to 50 GHz is obtained by tuning the microwave drive signal from 8 to 12.5 GHz. The integrity of the generated millimeter-wave signal is maintained after transmission over a 25-km standard single-mode fiber. Theoretical analysis on the harmonic suppression with different modulation depths and filter attenuations is also discussed.

  16. Power Electronics for Distributed Energy Systems and Transmission and Distribution Applications: Assessing the Technical Needs for Utility Applications

    Energy Technology Data Exchange (ETDEWEB)

    Tolbert, L.M.

    2005-12-21

    Power electronics can provide utilities the ability to more effectively deliver power to their customers while providing increased reliability to the bulk power system. In general, power electronics is the process of using semiconductor switching devices to control and convert electrical power flow from one form to another to meet a specific need. These conversion techniques have revolutionized modern life by streamlining manufacturing processes, increasing product efficiencies, and increasing the quality of life by enhancing many modern conveniences such as computers, and they can help to improve the delivery of reliable power from utilities. This report summarizes the technical challenges associated with utilizing power electronics devices across the entire spectrum from applications to manufacturing and materials development, and it provides recommendations for research and development (R&D) needs for power electronics systems in which the U.S. Department of Energy (DOE) could make a substantial impact toward improving the reliability of the bulk power system.

  17. Final Technical Report: Integrated Distribution-Transmission Analysis for Very High Penetration Solar PV

    Energy Technology Data Exchange (ETDEWEB)

    Palmintier, Bryan [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Hale, Elaine [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Hansen, Timothy M. [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Jones, Wesley [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Biagioni, David [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Baker, Kyri [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Wu, Hongyu [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Giraldez, Julieta [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Sorensen, Harry [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Lunacek, Monte [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Merket, Noel [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Jorgenson, Jennie [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)); Hodge, Bri-Mathias [NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States))

    2016-01-29

    Transmission and distribution simulations have historically been conducted separately, echoing their division in grid operations and planning while avoiding inherent computational challenges. Today, however, rapid growth in distributed energy resources (DERs)--including distributed generation from solar photovoltaics (DGPV)--requires understanding the unprecedented interactions between distribution and transmission. To capture these interactions, especially for high-penetration DGPV scenarios, this research project developed a first-of-its-kind, high performance computer (HPC) based, integrated transmission-distribution tool, the Integrated Grid Modeling System (IGMS). The tool was then used in initial explorations of system-wide operational interactions of high-penetration DGPV.

  18. Economic and technical analysis of distributed utility benefits for hydrogen refueling stations

    Energy Technology Data Exchange (ETDEWEB)

    Iannucci, J.J.; Eyer, J.M.; Horgan, S.A. [Distributed Utility Associates, Livermore, CA (United States); Schoenung, S.M. [Longitude 122 West, Inc., Menlo Park, CA (United States)

    1998-08-01

    This paper discusses the potential economic benefits of operating hydrogen refueling stations to supplying pressurized hydrogen for vehicles, and supplying distributed utility generation, transmission and distribution peaking needs to the utility. The study determined under what circumstances using a hydrogen-fueled generator as a distributed utility generation source, co-located with the hydrogen refueling station components (electrolyzer and storage), would result in cost savings to the station owner, and hence lower hydrogen production costs.

  19. LNG Import Contract in the perspective of Associated Technical and Managerial Challenges for the Distribution Companies of Pakistan

    Directory of Open Access Journals (Sweden)

    Kawish Bakht

    2016-06-01

    Full Text Available Energy Managers and Government Office Holders in Pakistan are nowadays pondering over multiple options for the resolution of ongoing Energy crises in the country. LNG (Liquefied Natural Gas import has been finalized for being the quickest remedy among all the available options. LNG (Liquefied Natural Gas contract is at the verge to be implemented in Pakistan. However there are several factors that need to be addressed while implementing the project. In this paper, identification of the challenges affecting the optimized distribution of gas is presented. The sustainability of LNG (Liquefied Natural Gas Project depends upon the successful running of the project without facing any financial crises arising from the gas distribution losses. The motive of this paper is the identification of the factors that are risk for the sustainability and successful running of LNG Import in Pakistan on long term basis. In association it is required to identify technical and managerial challenges for the gas distribution companies in distribution of LNG. Moreover recommendations are proposed for modification in existing infrastructure and governing policies related to gas distribution companies for logical success and long term sustainability of LNG import in Pakistan.

  20. Effect of Gold Nanoparticles on Prostate Dose Distribution under Ir-192 Internal and 18 MV External Radiotherapy Procedures Using Gel Dosimetry and Monte Carlo Method

    Directory of Open Access Journals (Sweden)

    Khosravi H.

    2015-03-01

    Full Text Available Background: Gel polymers are considered as new dosimeters for determining radiotherapy dose distribution in three dimensions. Objective: The ability of a new formulation of MAGIC-f polymer gel was assessed by experimental measurement and Monte Carlo (MC method for studying the effect of gold nanoparticles (GNPs in prostate dose distributions under the internal Ir-192 and external 18MV radiotherapy practices. Method: A Plexiglas phantom was made representing human pelvis. The GNP shaving 15 nm in diameter and 0.1 mM concentration were synthesized using chemical reduction method. Then, a new formulation of MAGIC-f gel was synthesized. The fabricated gel was poured in the tubes located at the prostate (with and without the GNPs and bladder locations of the phantom. The phantom was irradiated to an Ir-192 source and 18 MV beam of a Varian linac separately based on common radiotherapy procedures used for prostate cancer. After 24 hours, the irradiated gels were read using a Siemens 1.5 Tesla MRI scanner. The absolute doses at the reference points and isodose curves resulted from the experimental measurement of the gels and MC simulations following the internal and external radiotherapy practices were compared. Results: The mean absorbed doses measured with the gel in the presence of the GNPs in prostate were 15% and 8 % higher than the corresponding values without the GNPs under the internal and external radiation therapies, respectively. MC simulations also indicated a dose increase of 14 % and 7 % due to presence of the GNPs, for the same experimental internal and external radiotherapy practices, respectively. Conclusion: There was a good agreement between the dose enhancement factors (DEFs estimated with MC simulations and experiment gel measurements due to the GNPs. The results indicated that the polymer gel dosimetry method as developed and used in this study, can be recommended as a reliable method for investigating the DEF of GNPs in internal

  1. Distributed Constrained Optimization over Constrained Communication Topologies. Technical Report IES-2014-07

    OpenAIRE

    Pfrommer, Julius

    2015-01-01

    The Max-Sum algorithm, an instance of the Generalized Distributive Law family, is known to solve Distributed Constraint Optimization Problems (DCOP) where the summed utility functions of interacting agents are maximized. However, Max-Sum relies on available communication channels between all agents that partake in a utility function. We present a generalization of Max-Sum that solves DCOP exactly in situations where the communication network layout does not match the agents' utility inter-dep...

  2. Technical Note: Intrafractional changes in time lag relationship between anterior–posterior external and superior–inferior internal motion signals in abdominal tumor sites

    Energy Technology Data Exchange (ETDEWEB)

    Regmi, Rajesh; Lovelock, D. Michael; Zhang, Pengpeng; Pham, Hai; Xiong, Jianping; Yorke, Ellen D.; Mageras, Gig S., E-mail: magerasg@mskcc.org [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York 10065 (United States); Goodman, Karyn A.; Wu, Abraham J. [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York 10065 (United States)

    2015-06-15

    Purpose: To investigate constancy, within a treatment session, of the time lag relationship between implanted markers in abdominal tumors and an external motion surrogate. Methods: Six gastroesophageal junction and three pancreatic cancer patients (IRB-approved protocol) received two cone-beam CTs (CBCT), one before and one after treatment. Time between scans was less than 30 min. Each patient had at least one implanted fiducial marker near the tumor. In all scans, abdominal displacement (Varian RPM) was recorded as the external motion signal. Purpose-built software tracked fiducials, representing internal signal, in CBCT projection images. Time lag between superior–inferior (SI) internal and anterior–posterior external signals was found by maximizing the correlation coefficient in each breathing cycle and averaging over all cycles. Time-lag-induced discrepancy between internal SI position and that predicted from the external signal (external prediction error) was also calculated. Results: Mean ± standard deviation time lag, over all scans and patients, was 0.10 ± 0.07 s (range 0.01–0.36 s). External signal lagged the internal in 17/18 scans. Change in time lag between pre- and post-treatment CBCT was 0.06 ± 0.07 s (range 0.01–0.22 s), corresponding to 3.1% ± 3.7% (range 0.6%–10.8%) of gate width (range 1.6–3.1 s). In only one patient, change in time lag exceeded 10% of the gate width. External prediction error over all scans of all patients varied from 0.1 ± 0.1 to 1.6 ± 0.4 mm. Conclusions: Time lag between internal motion along SI and external signals is small compared to the treatment gate width of abdominal patients examined in this study. Change in time lag within a treatment session, inferred from pre- to post-treatment measurements is also small, suggesting that a single measurement of time lag at the session start is adequate. These findings require confirmation in a larger number of patients.

  3. Training Needs Assessment of Technical Skills in Managers of Tehran Electricity Distribution Company

    Science.gov (United States)

    Koohi, Amir Hasan; Ghandali, Fatemeh; Dehghan, Hasan; Ghandali, Najme

    2016-01-01

    Current dissertation has been conducted in order to investigate and detect training needs of the mangers (top and middle) in Tehran Electricity Distribution Company. Research method is applied kind based on its purpose. Due to data collection method, this query is descriptive-survey type. Statistical population in this study is all of managers in…

  4. Distribution of marine birds on Georges Bank and adjacent waters. Technical progress report, 1 January--31 August 1978

    Energy Technology Data Exchange (ETDEWEB)

    Powers, K.D.

    1978-10-01

    The work accomplished during the period covered in this technical progress report demonstrates the importance, interest, and necessity of a distribution study of marine birds in the Georges Bank area on a national and international scale. Cooperation was extended by the U.S. National Marine Fisheries Service, U.S. Fish and Wildlife Service, U.S. Coast Guard, and by the Canadian Wildlife Service, Halifax, N.S., AltantNIRO, Kaliningrad, USSR, and Federal Republic of Germany. Two sampling methods, fixed-area and total bird counts, were effectively employed, which allow comparable data bases with marine bird distribution information being collected in the North Pacific, Bering and Chukchi Seas (Outer Continental Shelf Energy Assessment Program), and in the North Atlantic and Canadian Arctic (CWS and The Seabird Group). A marine bird data retrieval bank is being developed for MBO seabird data at the USFWS Migratory Bird and Habitat Research Laboratory. A food habits bibliography and prey item/bird species summary table for marine birds in the western North Atlantic has been prepared from existing literature. Unpublished NMFS data on zooplankton/ichthyoplankton, and ground fish is being made available for possible correlations in distribution of selected prey items with bird species.

  5. The external and internal measurement impact on shear modulus distribution within cyclic small strains in triaxal studies into cohesive soil

    Directory of Open Access Journals (Sweden)

    Jastrzebska M.

    2010-06-01

    Full Text Available The paper deals with comparison of tangent shear moduli Gs of kaolin from Tułowice obtained from cyclic triaxial tests on the basis of external and internal reading in the small strains range (10-5÷10-3. The tests were carried out on a modernised test bed, enabling full saturation of specimens using the back pressure method as well as a precise internal measurement of strains by means of contactless microdisplacements sensors. The value of linearity factor L is one of adopted quality criteria for two measuring methods. Maintaining a constant deformation rate the influence of various cyclic process parameters (deviator stress amplitude – constant or variable; high or low; initial level of stress and strain, at which the unloading and reloading cycles were started; overconsolidation ratio OCR as well as cycles’ number and arrangement on the "shear modulus – axial strain" characteristic was studied. The obtained values of Gint and Gext (or Lint and Lext clearly show an underestimation (even 5 times of Gs value within the range 10-5÷10-3 when using an external measurement. In addition, the differences between Gint and Gext, which develop differently depending on specified cyclic process parameters, gradually decrease with increasing axial strains.

  6. Fiberglass distribution poles: A technical-economic solution for electric energy transport lines

    Energy Technology Data Exchange (ETDEWEB)

    Souto Rodriguez, E.L. [Norpost S.A., Lugones (Spain). Poligono Industrial de Silvota; Balust, J.S. [Union Electrica Fenosa, Madrid (Spain)

    1995-11-01

    In Spain, building on the experiences from the more developed nations, a research project on an economic fiberglass distribution pole for electric energy transport lines was started. The paper describes the studies carried out in three phases: general survey, characteristics and properties, and economic aspects. The characteristics of the poles which are described are: light weight, electrical properties, easy installation, safety, low maintenance, longevity, vibration damping, environmental impacts, and mechanical properties. The economic analysis showed that although fiberglass reinforced composites cost more to procure, their life-cycle cost is less due to low maintenance.

  7. An Empirical Analysis on Internal and External Effects of Technical Progress in Equipment Manufacturing Industry%装备制造业技术进步内外部效应的实证分析

    Institute of Scientific and Technical Information of China (English)

    刘震; 张宏

    2016-01-01

    In the realistic context of“Made in China by 2025”and“Industrial 4.0”,this paper,based on the analysis of the do⁃mestic and international effect mechanism of technical progress in equipment manufacturing industry,empirically verifies the internal and external effects of technical progress in China’s equipment manufacturing industry with the aid of the panel and the VAR model. The study finds that:In the internal effect,the equipment manufacturing industry’s income and energy effi⁃ciency have a two-way positive impact on technical level,profit has a one-way positive impact on technical level,and employ⁃ment and technology level show a two-way negative impact;In the external effect,the equipment manufacturing industry’s FDI quality and technical level present a two-way positive impact,international division of labor and technical level present a one-way positive impact,and trade competitiveness and technical level present a two-way negative impact. Therefore,China should increase investment and improve productivity at home,and deepen the international division of labor and actively par⁃ticipate in the construction of value chain in order to improve the technical level of equipment manufacturing industry.%文章以“中国制造2025”“、工业4.0”时代来临为现实背景,在分析装备制造业技术进步的国内及国际效应作用机理的基础上,借助面板和VAR模型从实证角度验证我国装备制造业技术进步的内外部效应。研究发现,内部效应中,装备制造业收入及能耗效率指标与技术水平呈现双向正面影响,利润与技术水平为单向正面,就业与技术水平为双向负面;外部效应中,装备制造业引进外资质量与技术水平呈现双向正面影响,国际分工程度与技术水平为单向正面,贸易竞争力与技术水平为双向负面。因此为提升装备制造业技术水平,国内应加大投入,提高

  8. The effect of external magnetic field on the density distributions and electromagnetic fields in the interaction of high-intensity short laser pulse with collisionless underdense plasma

    Science.gov (United States)

    Mahmoodi-Darian, Masoomeh; Ettehadi-Abari, Mehdi; Sedaghat, Mahsa

    2016-03-01

    Laser absorption in the interaction between ultra-intense femtosecond laser and solid density plasma is studied theoretically here in the intensity range I{λ^2} ˜eq 10^{14}{-}10^{16}{{W}}{{{cm}}^{-2}} \\upmu{{{m}}2} . The collisionless effect is found to be significant when the incident laser intensity is less than 10^{16}{{W}}{{{cm}}^{-2}}\\upmu{{{m}}2} . In the current work, the propagation of a high-frequency electromagnetic wave, for underdense collisionless plasma in the presence of an external magnetic field is investigated. When a constant magnetic field parallel to the laser pulse propagation direction is applied, the electrons rotate along the magnetic field lines and generate the electromagnetic part in the wake with a nonzero group velocity. Here, by considering the ponderomotive force in attendance of the external magnetic field and assuming the isothermal collisionless plasma, the nonlinear permittivity of the plasma medium is obtained and the equation of electromagnetic wave propagation in plasma is solved. Here, by considering the effect of the ponderomotive force in isothermal collisionless magnetized plasma, it is shown that by increasing the laser pulse intensity, the electrons density profile leads to steepening and the electron bunches of plasma become narrower. Moreover, it is found that the wavelength of electric and magnetic field oscillations increases by increasing the external magnetic field and the density distribution of electrons also grows in comparison to the unmagnetized collisionless plasma.

  9. Final Technical Report: Hawaii Hydrogen Center for Development and Deployment of Distributed Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rocheleau, Richard E.

    2008-09-30

    -efficiency CIGS and a-Si:H with operating features compatible with high-efficiency photoelectrochemical (PEC) water-splitting. The objective of one activity under the hydrogen production from biomass task was to conduct parametric testing of the Pearson gasifier and to determine the effects of gasifier operating conditions on the gas yields and quality. The hydrogen yield from this gasifier was evaluated in a parametric test series over a range of residence times from 0.8 to 2.2 seconds. H2 concentrations as high as 55% (volume) were measured in the product gas at the longer residence times and this corresponds to a hydrogen yield of 90 kg per tonne of bagasse without gas upgrading. The objective of another activity was to develop hot gas clean-up capabilities for the HNEI gasifier test facility to support hydrogen-from-biomass research. The product gas stream at the outlet of the hot gas filter was characterized for concentrations of permanent gas species and contaminants. Biomass feedstock processing activity included a preliminary investigation into methods for processing sugar cane trash at the Puunene Sugar Factory on the island of Maui, Hawaii. The objective of the investigation was to explore treatment methods that would enable the successful use of cane trash as fuel for the production of hydrogen via gasification. Analyses were completed for the technical and economic feasibility of producing biofuel from photosynthetic marine microbes on a commercial scale. Results included estimates for total costs, energy efficiency, and return on investment. The biohydrogen team undertook a comprehensive review of the field and came to what is considered a realistic conclusion. To summarize, continued research is recommended in the fundamentals of the science related to genetic engineering and specific topics to cover knowledge gaps. In the meantime, the team also advocates continued development of related processes which can be linked to pollution control and other real world

  10. Final Technical Report: Hawaii Hydrogen Center for Development and Deployment of Distributed Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rocheleau, Richard E.

    2008-09-30

    -efficiency CIGS and a-Si:H with operating features compatible with high-efficiency photoelectrochemical (PEC) water-splitting. The objective of one activity under the hydrogen production from biomass task was to conduct parametric testing of the Pearson gasifier and to determine the effects of gasifier operating conditions on the gas yields and quality. The hydrogen yield from this gasifier was evaluated in a parametric test series over a range of residence times from 0.8 to 2.2 seconds. H2 concentrations as high as 55% (volume) were measured in the product gas at the longer residence times and this corresponds to a hydrogen yield of 90 kg per tonne of bagasse without gas upgrading. The objective of another activity was to develop hot gas clean-up capabilities for the HNEI gasifier test facility to support hydrogen-from-biomass research. The product gas stream at the outlet of the hot gas filter was characterized for concentrations of permanent gas species and contaminants. Biomass feedstock processing activity included a preliminary investigation into methods for processing sugar cane trash at the Puunene Sugar Factory on the island of Maui, Hawaii. The objective of the investigation was to explore treatment methods that would enable the successful use of cane trash as fuel for the production of hydrogen via gasification. Analyses were completed for the technical and economic feasibility of producing biofuel from photosynthetic marine microbes on a commercial scale. Results included estimates for total costs, energy efficiency, and return on investment. The biohydrogen team undertook a comprehensive review of the field and came to what is considered a realistic conclusion. To summarize, continued research is recommended in the fundamentals of the science related to genetic engineering and specific topics to cover knowledge gaps. In the meantime, the team also advocates continued development of related processes which can be linked to pollution control and other real world

  11. Migration with fiscal externalities.

    Science.gov (United States)

    Hercowitz, Z; Pines, D

    1991-11-01

    "This paper analyses the distribution of a country's population among regions when migration involves fiscal externalities. The main question addressed is whether a decentralized decision making [by] regional governments can produce an optimal population distribution...or a centralized intervention is indispensable, as argued before in the literature.... It turns out that, while with costless mobility the fiscal externality is fully internalized by voluntary interregional transfers, with costly mobility, centrally coordinated transfers still remain indispensable for achieving the socially optimal allocation."

  12. Technical Note: Modeling a complex micro-multileaf collimator using the standard BEAMnrc distribution

    Energy Technology Data Exchange (ETDEWEB)

    Kairn, T.; Kenny, J.; Crowe, S. B.; Fielding, A. L.; Franich, R. D.; Johnston, P. N.; Knight, R. T.; Langton, C. M.; Schlect, D.; Trapp, J. V. [School of Physical and Chemical Sciences, Queensland University of Technology, G.P.O. Box 2434, Brisbane, Queensland 4001 (Australia); Premion, Wesley Medical Centre, Suite 1, 40 Chasely St., Auchenflower, Queensland 4066 (Australia); School of Physical and Chemical Sciences, Queensland University of Technology, G.P.O. Box 2434, Brisbane, Queensland 4001 (Australia); School of Applied Sciences, RMIT University, G.P.O. Box 2476, Melbourne, Victoria 3001 (Australia); Australian Radiation Protection and Nuclear Safety Agency, 619 Lower Plenty Road, Yallambie, Victoria 3085 (Australia); Premion, Wesley Medical Centre, Suite 1, 40 Chasely St., Auchenflower, Queensland 4066 (Australia); School of Physical and Chemical Sciences, Queensland University of Technology, G.P.O. Box 2434, Brisbane, Queensland 4001 (Australia); Premion, Wesley Medical Centre, Suite 1, 40 Chasely St., Auchenflower, Queensland 4066 (Australia); School of Physical and Chemical Sciences, Queensland University of Technology, G.P.O. Box 2434, Brisbane, Queensland 4001 (Australia)

    2010-04-15

    Purpose: The component modules in the standard BEAMnrc distribution may appear to be insufficient to model micro-multileaf collimators that have trifaceted leaf ends and complex leaf profiles. This note indicates, however, that accurate Monte Carlo simulations of radiotherapy beams defined by a complex collimation device can be completed using BEAMnrc's standard VARMLC component module. Methods: That this simple collimator model can produce spatially and dosimetrically accurate microcollimated fields is illustrated using comparisons with ion chamber and film measurements of the dose deposited by square and irregular fields incident on planar, homogeneous water phantoms. Results: Monte Carlo dose calculations for on-axis and off-axis fields are shown to produce good agreement with experimental values, even on close examination of the penumbrae. Conclusions: The use of a VARMLC model of the micro-multileaf collimator, along with a commissioned model of the associated linear accelerator, is therefore recommended as an alternative to the development or use of in-house or third-party component modules for simulating stereotactic radiotherapy and radiosurgery treatments. Simulation parameters for the VARMLC model are provided which should allow other researchers to adapt and use this model to study clinical stereotactic radiotherapy treatments.

  13. Stress State of Elastic Thick-Walled Ring With Self-Balanced Pressures Distributed on Its Internal and External Borders

    Directory of Open Access Journals (Sweden)

    Kravchuk Aleksandr Stepanovich

    2015-10-01

    Full Text Available For the first time with the help of the theory of analytic functions and Kolosov-Muskhelishvili formulas the problem of the two-dimensional theory of elasticity for a thickwalled ring with the uneven pressures, acting on its borders, was solved. The pressure on the inner and outer boundaries is represented by Fourier series. The authors represent the two complex functions which solve boundary problem in the form of Laurent series. The logarithmic terms in these series are absent because the boundary problem has the self-balancing loads on each boundary of ring. The coefficients in the Laurent series are calculated by the boundary conditions. Firstly, the equations were obtained in the general form. But the hypothesis about even distributions of pressures at borders of ring was used for constructing an example. It leads to the fact that all coefficients of analytic functions represented in Laurent series have to be only real. As a solving example, the representation of pressures in equivalent hypotrochoids was used. The application of the computer algebra system Mathematica greatly simplifies the calculation of the distribution of stresses and displacements in ring. It does not require manual formal separation of real and imaginary parts in terms of Kolosov-Muskhelishvili to display the distribution of the physical parameters. It separates them only for calculated numbers with the help of built-in functions.

  14. Effect of external phosphate addition on solid-phase iron distribution and iron accumulation in Mangrove Kandelia obovata (S. L.).

    Science.gov (United States)

    Du, Jingna; Liu, Jingchun; Lu, Haoliang; Hansell, Dennis; Zhang, Qiong; Wang, Wenyun; Yan, Chongling

    2015-09-01

    In this study, a pot experiment was conducted to evaluate the effect of phosphate (PO4 (3-)) addition on iron (Fe) cycling in mangrove ecosystem. Kandelia obovata (S. L.), one of the dominant mangrove species in the southeast of China, was cultivated in rhizoboxes under three different levels of P concentrations. Results showed the solid-phase Fe distribution and Fe(II)/Fe(III) values in both the root zone (rhizosphere) and bulk soil (non-rhizosphere) were comparable among all P levels (p > 0.05); P addition significantly decreased the pore water Fe content both in the rhizosphere and non-rhizosphere zone (p iron plaque formation and iron accumulation in K. obovata (S. L.) tissues (p iron, higher abundance of root Fe-reducing bacteria (FeRB) and Fe-oxidizing bacteria (FeOB), and together with higher amount of K. obovata (S. L.) root organic acids exudation result in a rapid Fe cycling in rhizosphere, which contribute to comparable solid-phase iron distribution among different P levels.

  15. Intraoperative neuromonitoring of the external branch of the superior laryngeal nerve during thyroidectomy: the need for evidence-based data and perioperative technical/technological standardization.

    Science.gov (United States)

    Mangano, Alberto; Lianos, Georgios D; Boni, Luigi; Kim, Hoon Yub; Roukos, Dimitrios H; Dionigi, Gianlorenzo

    2014-01-01

    The external branch of the superior laryngeal nerve (EBSLN) is surgically relevant since its close anatomical proximity to the superior thyroid vessels. There is heterogeneity in the EBSLN anatomy and EBSLN damage produces changes in voice that are very heterogenous and difficult to diagnose. The reported prevalence of EBSLN injury widely ranges. EBSLN iatrogenic injury is considered the most commonly underestimated complication in endocrine surgery because vocal assessment underestimates such event and laryngoscopic postsurgical evaluation does not show standardized findings. In order to decrease the risk for EBSLN injury, multiple surgical approaches have been described so far. IONM provides multiple advantages in the EBSLN surgical approach. In this review, we discuss the current state of the art of the monitored approach to the EBSLN. In particular, we summarize, providing our additional remarks, the most relevant aspects of the standardized technique brilliantly described by the INMSG (International Neuromonitoring Study Group). In conclusion, in our opinion, there is currently the need for more prospective randomized trials investigating the electrophysiological and pathological aspects of the EBSLN for a better understanding of the role of IONM in the EBSLN surgery.

  16. C市信息港外网网络结构及技术浅析%C City Information Port External Network Structure and Technical Analysis

    Institute of Scientific and Technical Information of China (English)

    关嵘

    2012-01-01

    Informatization is current world economy and social development trend. Advance informatization construction, to improve the modernization level of management, improve work efficiency, is of great significance. C city information port infrastructure construction for the C city informatization development provides a safe, reliable, efficient network platform. This paper analyses and studies the C city information port external network structure, and the use of network technology to do brief analysis.%信息化是当今世界经济和社会发展的大趋势。推进信息化建设,对于提高新现代化管理水平,提高工作效率都具有重要的意义。C市信息港基础网络的建设为C市信息化的发展提供了一个安全、可靠、高效的网络平台。文章分析和研究了C市信息港外网网络结构,并对所使用的网络技术做简要分析。

  17. Intraoperative Neuromonitoring of the External Branch of the Superior Laryngeal Nerve during Thyroidectomy: The Need for Evidence-Based Data and Perioperative Technical/Technological Standardization

    Directory of Open Access Journals (Sweden)

    Alberto Mangano

    2014-01-01

    Full Text Available The external branch of the superior laryngeal nerve (EBSLN is surgically relevant since its close anatomical proximity to the superior thyroid vessels. There is heterogeneity in the EBSLN anatomy and EBSLN damage produces changes in voice that are very heterogenous and difficult to diagnose. The reported prevalence of EBSLN injury widely ranges. EBSLN iatrogenic injury is considered the most commonly underestimated complication in endocrine surgery because vocal assessment underestimates such event and laryngoscopic postsurgical evaluation does not show standardized findings. In order to decrease the risk for EBSLN injury, multiple surgical approaches have been described so far. IONM provides multiple advantages in the EBSLN surgical approach. In this review, we discuss the current state of the art of the monitored approach to the EBSLN. In particular, we summarize, providing our additional remarks, the most relevant aspects of the standardized technique brilliantly described by the INMSG (International Neuromonitoring Study Group. In conclusion, in our opinion, there is currently the need for more prospective randomized trials investigating the electrophysiological and pathological aspects of the EBSLN for a better understanding of the role of IONM in the EBSLN surgery.

  18. Literature Review of Internal and External Research Literature on the Urban Distribution%城市配送研究的新进展

    Institute of Scientific and Technical Information of China (English)

    课题组

    2014-01-01

    The phenomena caused by the urban distribution,such as,urban congestion,higher distribution costs and so on , restricts the development of electronic commerce in our country,and it is useful for us to carry out the theoretical study on e-commerce to analyze and summarize the existing research results of the urban distribution. Reviewing the internal and external research literature on urban distribution from 2006 to 2014,the study can be divided into nine aspects according to the content, such as the city distribution system problem,distribution model problem,distribution center problem,distribution route optimization,distribution vehicle scheduling,the information construction problem,sustainable urban distribution problem, evaluation of urban distribution and other issues and so on;according to research methods,it can be divided into quantitative study,qualitative study and the combining of the both. It is found that the current research focus of city distribution is the distribution center location problem,vehicle routing problem,sustainable urban distribution problem and evaluation of urban distribution problem,and the research of the sustainable urban distribution and data mining need a further study.%城市配送引发的城市拥堵、配送成本高等现象制约着我国电子商务的发展,对城市配送现有研究成果进行分析与总结有助于电子商务的理论研究。综述2006~2014年国内外有关城市配送的文献,可按研究内容分为九个方面,即城市配送体系问题、城市配送模式问题、城市配送中心问题、城市配送路径优化问题、城市配送车辆调度问题、城市配送信息化建设问题、城市配送可持续问题、城市配送评价问题以及城市配送的其他问题;按研究方法可分为定量、定性、定性定量结合三类。分析发现,当前城市配送的研究重点在于配送中心选址问题、车辆路径优化问题、城市配送可持续问题

  19. Comparative analysis of frequency and noise characteristics of Fabry – Perot and distributed feedback laser diodes with external optical injection locking

    Energy Technology Data Exchange (ETDEWEB)

    Afonenko, A A; Dorogush, E S [Belarusian State University, Minsk (Belarus); Malyshev, S A; Chizh, A L [B.I. Stepanov Institute of Physics, National Academy of Sciences of Belarus, Minsk (Belarus)

    2015-11-30

    Using a system of coupled travelling wave equations, in the small-signal regime we analyse frequency and noise characteristics of index- or absorption-coupled distributed feedback laser diodes, as well as of Fabry – Perot (FP) laser diodes. It is shown that the weakest dependence of the direct modulation efficiency on the locking frequency in the regime of strong external optical injection locking is exhibited by a FP laser diode formed by highly reflective and antireflective coatings on the end faces of a laser structure. A reduction in the dependence of output characteristics of the laser diode on the locking frequency can be attained by decreasing the reflection coefficient of the antireflective FP mirror. (control of laser radiation parameters)

  20. The accuracy of platelet counting in thrombocytopenic blood samples distributed by the UK National External Quality Assessment Scheme for General Haematology.

    Science.gov (United States)

    De la Salle, Barbara J; McTaggart, Paul N; Briggs, Carol; Harrison, Paul; Doré, Caroline J; Longair, Ian; Machin, Samuel J; Hyde, Keith

    2012-01-01

    A knowledge of the limitations of automated platelet counting is essential for the effective care of thrombocytopenic patients and management of platelet stocks for transfusion. For this study, 29 external quality assessment specimen pools with platelet counts between 5 and 64 × 10(9)/L were distributed to more than 1,100 users of 23 different hematology analyzer models. The same specimen pools were analyzed by the international reference method (IRM) for platelet counting at 3 reference centers. The IRM values were on average lower than the all-methods median values returned by the automated analyzers. The majority (~67%) of the automated analyzer results overestimated the platelet count compared with the IRM, with significant differences in 16.5% of cases. Performance differed between analyzer models. The observed differences may depend in part on the nature of the survey material and analyzer technology, but the findings have implications for the interpretation of platelet counts at levels of clinical decision making.

  1. The multi-layered ring under parabolic distribution of radial stresses combined with uniform internal and external pressure

    Directory of Open Access Journals (Sweden)

    Christos F. Markides

    2017-04-01

    Full Text Available A recently introduced solution for the stress- and displacement-fields, developed in a multi-layered circular ring, composed of a finite number of linearly elastic concentric layers, subjected to a parabolic distribution of ra-dial stresses, is here extended to encompass a more general loading scheme, closer to actual conditions. The loading scheme includes, besides the para¬-bolic radial stresses, a combination of uniform pressures acting along the outer- and inner- most boundaries of the layered ring. The analytic solution of the problem is achieved by adopting Savin’s pioneering approach for an infinite plate with a hole strengthened by rings. Taking advantage of the results provided by the ana¬lytic solution, a numerical model, simulating the configuration of a three-layered ring (quite commonly encountered in practic¬al applications is validated. The numerical model is then used for a parametric analysis enlightening some crucial aspects of the overall response of the ring.

  2. ASSESSMENTOF BETA PARTICLE FLUX FROM SURFACE CONTAMINATION AS A RELATIVE INDICATOR FOR RADIONUCLIDE DISTRIBUTION ON EXTERNAL SURFACES OF A MULTI-STORY BUILDING IN PRIPYAT

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.

    2009-11-17

    How would we recover if a Radiological Dispersion Device (e.g., dirty bomb) or Improvised Nuclear Device were to detonate in a large city? In order to assess the feasibility of remediation following such an event, several issues would have to be considered, including the levels and characteristics of the radioactive contamination, the availability of the required resources to accomplish decontamination, and the planned future use of the city's structures and buildings. Presently little is known about the distribution, redistribution, and migration of radionuclides in an urban environment. However, Pripyat, a city substantially contaminated by the Chernobyl Nuclear Power Plant accident, may provide some answers. The main objective of this study was to determine the radionuclide distribution on a Pripyat multi-story building, which had not been previously decontaminated and therefore could reflect the initial fallout and its further natural redistribution on external surfaces. The 7-story building selected was surveyed from the ground floor to the roof on horizontal and vertical surfaces along seven ground-to-roof transections. Some of the results from this study indicate that the upper floors of the building had higher contamination levels than the lower floors. The authors consequently recommend that existing decontamination procedures for tall structures be re-examined and modified accordingly.

  3. Transit time distributions and StorAge Selection functions in a sloping soil lysimeter with time-varying flow paths: Direct observation of internal and external transport variability

    Science.gov (United States)

    Kim, Minseok; Pangle, Luke A.; Cardoso, Charléne; Lora, Marco; Volkmann, Till H. M.; Wang, Yadi; Harman, Ciaran J.; Troch, Peter A.

    2016-09-01

    Transit times through hydrologic systems vary in time, but the nature of that variability is not well understood. Transit times variability was investigated in a 1 m3 sloping lysimeter, representing a simplified model of a hillslope receiving periodic rainfall events for 28 days. Tracer tests were conducted using an experimental protocol that allows time-variable transit time distributions (TTDs) to be calculated from data. Observed TTDs varied with the storage state of the system, and the history of inflows and outflows. We propose that the observed time variability of the TTDs can be decomposed into two parts: "internal" variability associated with changes in the arrangement of, and partitioning between, flow pathways; and "external" variability driven by fluctuations in the flow rate along all flow pathways. These concepts can be defined quantitatively in terms of rank StorAge Selection (rSAS) functions, which is a theory describing lumped transport dynamics. Internal variability is associated with temporal variability in the rSAS function, while external is not. The rSAS function variability was characterized by an "inverse storage effect," whereby younger water is released in greater proportion under wetter conditions than drier. We hypothesize that this effect is caused by the rapid mobilization of water in the unsaturated zone by the rising water table. Common approximations used to model transport dynamics that neglect internal variability were unable to reproduce the observed breakthrough curves accurately. This suggests that internal variability can play an important role in hydrologic transport dynamics, with implications for field data interpretation and modeling.

  4. Distribution and specific central projections of mechanoreceptors in the thorax and proximal leg joints of locusts. II. The external mechanoreceptors: hair plates and tactile hairs.

    Science.gov (United States)

    Pflüger, H J; Bräunig, P; Hustert, R

    1981-01-01

    Tactile hairs on the locust thorax can be divided into two classes by their external morphology and their central projection pattern: Short hairs, 10--100 micrometer in length, which are assembled in distinct plates and rows, and long hairs, 100--800 micrometer in length, which are distributed all over the body and are organized in large fields or aligned along the ridges of the appendages. The sensory fibers of the first class arborize in the lateral dorsal neuropile of thoracic ganglia and then extend further into the ipsilateral half of the corresponding ganglion in three main bundles from which fine rami of fibers end in the intermediate neuropile. In all three thoracic ganglia the projection pattern of homologous hair plates is similar. The sensory fibers of the second class exclusively terminate in special median ventral neuropiles, the ventral association center (VAC) and ventralmost ventral association center (VVAC). In addition fibers from meso- and metathoracic hairs, located close to the longitudinal midline of the animal, may terminate in the contralateral VAC and with one branch project to the next anterior ganglion through the ipsilateral connective. In contrast, fibers from prothoracic hairs were not found to leave their ganglion.

  5. Study of the temperature distribution on welded thin plates of duplex steel to be used for the external clad of a cask for transportation of radiopharmaceuticals products

    Energy Technology Data Exchange (ETDEWEB)

    Betini, Evandro G.; Ceoni, Francisco C.; Mucsi, Cristiano S.; Politano, Rodolfo; Rossi, Jesualdo L., E-mail: egbetini@ipen.br, E-mail: fceoni@hotmail.com, E-mail: csmucsi@ipen.br, E-mail: politano@ipen.br, E-mail: jelrossi@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Orlando, Marcos T.D., E-mail: mtdorlando@gmail.com [Universidade Federal do Espirito Santo (CCE/DFIS/UFES), Vitoria, ES (Brazil). Centro de Ciencias Exatas. Departamento de Fisica

    2015-07-01

    The clad material for a proprietary transport device for radiopharmaceutical products is the main focus of the present work. The production of {sup 99}Mo-{sup 99m}Tc transport cask requires a receptacle or cask where the UNS S32304 duplex steel sheet has shown that it meets high demands as the required mechanical strength and the spread of impact or shock waves mitigation. This work reports the experimental efforts in recording the thermal distribution on autogenous thin plates of UNS S32304 steel during welding. The UNS S32304 duplex steel is the most probable candidate for the external clad of the containment package for the transport of radioactive substances so it is highly relevant the understanding of all its physical parameters and its behavior under the thermal cycle imposed by a welding process. For the welding of the UNS S32304 autogenous plates the GTAW (gas tungsten arc welding) process was used with a pure argon arc protection atmosphere in order to simulate a butt joint weld on a thin duplex steel plate without filler metal. The thermal cycles were recorded by means of K-type thermocouples embedded by electrical spot welding near the weld region and connected to a multi-channel data acquisition system. The obtained results validate the reliability of the experimental apparatus for the future complete analysis of the welding experiment and further comparison to numerical analysis. (author)

  6. Technical Status of Foam Insulation Material of External Wall and its Preparation with Sandstone Coal Gangue%外墙泡沫保温材料的技术现状及用砂岩质煤矸石试制

    Institute of Scientific and Technical Information of China (English)

    邢军; 李小庆; 孙晓刚; 邱景平

    2015-01-01

    砂岩质煤矸石和抛光砖泥都是工业固体废弃物,在国家提倡外墙保温材料革新升级和煤矸石资源化利用的背景下,开发煤矸石基外墙泡沫保温材料,既可以实现建筑节能和外墙的安全防火,又可以改善矿区生态环境,减少对宝贵土地资源的占用。在介绍了我国外墙保温材料产业现状和国内关于煤矸石基外墙泡沫保温材料研究现状的基础上,重点分析了试验原料的增塑性和发泡性,并进行了煤矸石基外墙泡沫保温材料的试制。结果表明,以辽宁朝阳矸石山砂岩质煤矸石和辽宁法库某陶瓷厂的抛光砖泥为主要原料,碳化硅和氧化镁为复合造孔剂,硼砂为助熔剂,经陈化—成型—烧结工序,试制出了具有一定外观和性能的煤矸石基外墙泡沫保温材料,说明本试验技术路线是可行的。但要制备满足建筑业要求的、低成本的外墙泡沫保温材料,还需后续进行系统的原料配比和烧结制度优化试验。%Under the background of external wall thermal insulation materials innovation upgrading and coal gangue re-source utilization,as industrial solid wastes,sandstone coal gangue and polishing tile waste are used to develop the external wall insulation foam material,which can achieve construction energy-efficient and fire safety,improve the ecological environment of mining area,and reduce the waste of valuable land resources. Based on the introduction of China's status of external wall insu-lation materials industry and research on coal gangue external wall foam insulation material,the plasticity and foaming of the tested material were analyzed,and the coal gangue exterior wall foam insulation material was prepared. The results show that, coal gangue exterior wall foam insulation material with a certain appearance and property can be produced through the aging, molding,and sintering process, with sandstone coal gangue in Chaoyang City and

  7. Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach.

    Science.gov (United States)

    Zhai, Shiyan; Song, Genxin; Qin, Yaochen; Ye, Xinyue; Lee, Jay

    2017-01-01

    This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention.

  8. Planning the expansion of distribution: technical and regulatory considerations; Planejamento da expansao da distribuicao: consideracoes tecnicas e regulatorias

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Afonso Henriques Moreira; Haddad, Jamil; Cruz, Ricardo Alexandre Passos da [Universidade Federal de Itajuba (EXCEN/UNIFEI), MG (Brazil). Centro de Excelencia em Eficiencia Energetica, Recursos Naturais e Energia

    2008-07-01

    The article presents the basis for the new planning of power distribution highlighting the beginning of the public hearing process for the creation of PRODIST: Procedures for Distribution of Electric Power by the ANEEL - National Agency of Electrical Energy.

  9. Magnetized black holes in an external gravitational field

    Science.gov (United States)

    Kunz, Jutta; Nedkova, Petya; Yazadjiev, Stoytcho

    2017-07-01

    We obtain a family of exact solutions describing magnetized black holes in an external gravitational field. Locally the solutions can be interpreted as representing the near-horizon region of a black hole, which interacts with a surrounding matter distribution producing a strong magnetic field. Thus, the solutions reflect the influence of both a gravitational and an electromagnetic external potential in the strong field regime. The static members in the family are generalizations of the Schwarzschild solution in the described environment, while the rotating ones generalize the magnetized Reissner-Nordström solution when the influence of an external gravitational source is also taken into account. Technically, the solutions are obtained by means of a Harrison transformation, applied on the (electro-)vacuum distorted black holes constructed by Bretón et al. We examine the thermodynamical properties of the solutions, and compare them with the corresponding isolated black holes, and with the particular cases when the interaction with only one of the external potentials is taken into account. For the static black holes the influence of the external gravitational and magnetic fields is factorized in a sense, both affecting different properties, and leaving the rest intact. For the rotating solutions the external gravitational and magnetic fields are coupled through the conditions for avoiding conical singularities. The Meissner effect is observed for extremal rotating solutions only in the zero-charge limit, similar to the magnetized Reissner-Nordström black hole.

  10. Distributed generation - SHPP - Small hydroelectric power plants: technical and environmental issues; Geracao distribuida - PCH'S: aspectos tecnicos e ambientais

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Moacyr Trindade de Oliveira [Comissao de Servicos Publicos de Energia do Estado de Sao Paulo (CSPE), SP (Brazil)]. E-mail: mtandrade@sp.gov.br

    2004-07-01

    The Brazilian electrical system is presenting significant changes in its organizational structure in order to adapt to the new government's policies, market characteristics and the need for expansion of generation systems (supply), transmission and distribution (transport), and commercialization (demand) of energy. The previous structure propitiated the absolute control of the Union in the introduction of new plants, searching for a prioritization to their unit cost of energy, used as an 'Index of Merit' and expressed by U.S. $ / MWh, with planning costs increasing extent. This alternative did not address the environmental issues, referring only those technical aspects and costs of implementation. The socio-environmental issues were relegated to second plan. The significant interest of manufacturers prioritized the {sup b}ig construction{sup ,} as the simultaneous achievement of several big constructions enabling the consolidation of a constant flow of resources and sedimentary longevity of the situation. This paper aims to discuss and present the benefits of distributed generation electric power, with features to complement the offer, but with benefits for micro-regions in which they are deployed, based on technical, economic and socio environmental issues. (author)

  11. The External Mind

    DEFF Research Database (Denmark)

    The External Mind: an Introduction by Riccardo Fusaroli, Claudio Paolucci pp. 3-31 The sign of the Hand: Symbolic Practices and the Extended Mind by Massimiliano Cappuccio, Michael Wheeler pp. 33-55 The Overextended Mind by Shaun Gallagher pp. 57-68 The "External Mind": Semiotics, Pragmatism......, Extended Mind and Distributed Cognition by Claudio Paolucci pp. 69-96 The Social Horizon of Embodied Language and Material Symbols by Riccardo Fusaroli pp. 97-123 Semiotics and Theories of Situated/Distributed Action and Cognition: a Dialogue and Many Intersections by Tommaso Granelli pp. 125-167 Building...... Action in Public Environments with Diverse Semiotic Resources by Charles Goodwin pp. 169-182 How Marking in Dance Constitutes Thinking with the Body by David Kirsh pp. 183-214 Ambiguous Coordination: Collaboration in Informal Science Education Research by Ivan Rosero, Robert Lecusay, Michael Cole pp. 215-240...

  12. Technical Challenges of Plug-In Hybrid Electric Vehicles and Impacts to the US Power System: Distribution System Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gerkensmeyer, Clint; Kintner-Meyer, Michael CW; DeSteese, John G.

    2010-01-01

    This report documents work conducted by Pacific Northwest National Laboratory (PNNL) for the Department of Energy (DOE) to address three basic questions concerning how typical existing electrical distribution systems would be impacted by the addition of PHEVs to residential loads.

  13. Product kinetic and internal energy distributions via velocity-aligned Doppler spectroscopy: Technical report, May 1985-January 1987

    Energy Technology Data Exchange (ETDEWEB)

    Wittig, C.

    1987-01-01

    We developed a method of sub-Doppler resolution spectroscopy that is useful for determining kinetic energy distributions. With 'conventional' Doppler spectroscopy, it is almost impossible to obtain an accurate distribution from a line profile, even with the highest resolution, except when the distribution is quite simple (e.g., a delta function). This is due to the lineshape deriving from velocity components along the wave-vector of the probe radiation, k/sub probe/. However, by choosing only those species whose velocities are essentially parallel (or antiparallel) to k/sub probe/, this handicap is overcome. Here, one obtains the kinetic energy distribution along k/sub probe/, and the resolution is limited only by our ability to reject species with velocity components perpendicular to k/sub probe/. This rejection is done by spatial and temporal discrimination, using counterpropagating, overlapped, pulsed photolysis and probe sources. At long delays, molecules are detected which are aligned with k/sub probe/. We call the method velocity-aligned Doppler spectroscopy (VADS). We have perused several cases involving photodissociation of small molecules, in each case detecting H-atoms using sequential 2-photon ionization via Lyman-..cap alpha... We discern structure in the kinetic energy distribution which is attributed to internal excitation of the 'other' fragment, and resolution is limited by the dye laser bandwidth. In the case of HBr, we resolve the Br spin-orbit states, and with H/sub 2/S, we resolve the SH vibrational levels. 38 refs., 7 figs.

  14. Proposal for a technical-economic and environmental evaluation projects for distributed generation; Proposta de avaliacao tecnica-economica-ambiental para projetos de geracao distribuida

    Energy Technology Data Exchange (ETDEWEB)

    Fortes, Marcio Zamboti [Universidade Severino Sombra, Vassouras, RJ (Brazil); Gouvea, Marcos Roberto [Universidade de Sao Paulo (USP), SP (Brazil)

    2008-07-01

    The multi discipline effects in engineering projects, mainly in those of infrastructure, have extended the borders of research to not only evaluate them of the conventional point of view, economic and technical, but also environmental and social. On the other hand, the investor who traditionally searched alternatives only considering the economic and financial performance currently is taken to analyze also the social and environmental aspects. The model described in this paper is a solution proposal to evaluate the merit of an enterprise of distributed generation of thermal origin, considering the economic, social and environmental aspects, using merit indexes that quantify, directly, economic aspects as capital return tax and operating income eliminates, as well as social factors like the impact in the education, health, income and employment rates and still, it verifies the attendance of the environmental restrictions. The solution presented brings a simple and clear form to attribute a merit degree of aggregate to the alternatives to embed distributed generation, considering the intensity of the subjective social responsibility of the investor. The presented model is an important contribution to stimulate a form to evaluate and to prioritize the multi discipline implementation to a distributed generation enterprise, also being able, to be used as financial index or other incentives of the sort. (author)

  15. Technical development of cost-efficient installation of power distribution cables under pavements. Haiden chichuka ni okeru doboku kensetsu gorika gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kokusho, Koji; Kataoka, Tetsuyuki; Tanaka, Yasuyuki; Yoshida, Yasuo; Ikemi, Motoyoshi; Suzuki, Koichi; Kitano, Koichi; Kobayashi, Seiichi; Kanazu, Tsutomu; Komada, Hiroya.

    1987-12-01

    Various latest technical developments were surveyed for the cost-effective installation of power distribution cables under pavements, and their applicabilities were demonstrated with the evaluation of their cost-reduction effects. Cables in conventional vinyl protection tubes could be buried only 30cm under pavements, and in such case, the cost was reduced to 51% of those of conventional methods. As the results of soil tests, excavated soil over 80% was reusable through coarse screening. Underground radar technique to explore buried pipes from the surface was detectable several pipes buried 1.5-2.0m underground, although some problems in precision were found. The improvement of reinforced concrete man-hole structures to minimize the volume of excavated soil indicated the cost reduction of nearly 20%. The application of these techniques to the installation of cables was expected to ultimately halve the total civil engineering cost. 21 refs., 130 figs., 46 tabs.

  16. External Otitis (Swimmer's Ear)

    Science.gov (United States)

    ... to Pneumococcal Vaccine Additional Content Medical News External Otitis (Swimmer's Ear) By Bradley W. Kesser, MD, Associate ... the Outer Ear Ear Blockages Ear Tumors External Otitis (Swimmer's Ear) Malignant External Otitis Perichondritis External otitis ...

  17. European regional efficiency and geographical externalities: a spatial nonparametric frontier analysis

    Science.gov (United States)

    Ramajo, Julián; Cordero, José Manuel; Márquez, Miguel Ángel

    2017-10-01

    This paper analyses region-level technical efficiency in nine European countries over the 1995-2007 period. We propose the application of a nonparametric conditional frontier approach to account for the presence of heterogeneous conditions in the form of geographical externalities. Such environmental factors are beyond the control of regional authorities, but may affect the production function. Therefore, they need to be considered in the frontier estimation. Specifically, a spatial autoregressive term is included as an external conditioning factor in a robust order- m model. Thus we can test the hypothesis of non-separability (the external factor impacts both the input-output space and the distribution of efficiencies), demonstrating the existence of significant global interregional spillovers into the production process. Our findings show that geographical externalities affect both the frontier level and the probability of being more or less efficient. Specifically, the results support the fact that the spatial lag variable has an inverted U-shaped non-linear impact on the performance of regions. This finding can be interpreted as a differential effect of interregional spillovers depending on the size of the neighboring economies: positive externalities for small values, possibly related to agglomeration economies, and negative externalities for high values, indicating the possibility of production congestion. Additionally, evidence of the existence of a strong geographic pattern of European regional efficiency is reported and the levels of technical efficiency are acknowledged to have converged during the period under analysis.

  18. Design of technical scheme in smart distribution grid%智能配电网技术方案的应用设计

    Institute of Scientific and Technical Information of China (English)

    盛成玉; 孙振权

    2012-01-01

      分析了能量流、信息流及业务流在传统配电网、数字配电网及智能配电网中的不同特征,提出了智能配电网的技术方案,给出了完善电网基础设施(即能量传输系统-配电网网架)、通信传输系统平台以及相关的智能配电终端的设计方法;构建了智能配电网调度系统、配电自动化系统、用电管理系统及其构成的调配一体化系统、配用一体化系统、调配用一体化系统的基本功能、基础应用和高级应用架构,并对各个环节的关键技术组成进行了探讨。%  The smart distribution grid is a systems engineering. The characteristics of energy flow, information flow and business flow in traditional distribution grid, digital distribution grid and smart distribution grid (SDG) are analyzed in this paper. The technical scheme of SDG consists of three parts. The improvement of grid infrastructure (i.e. energy transmission system and distribution network), and the design method of the communication transmission system platform and relevant intelligent power distribuion terminal are presented in the paper. The scheduling system, the power distribution automation system and power management system are constructed. And then the basic functions, basic application and advanced application architecture of the scheduling and distribution integration system, the distribuion and management integration and the scheduling, distribution and management integration system are described. Key technologies of each link are discussed which provide a guidance for the future network construction.

  19. Evaluation of technical solutions for the enhancement of distribution networks with a high degree of distributed generation; Bewertung technischer Loesungen fuer den Ausbau von Verteilungsnetzen mit einem hohen Grad an EEG-Einspeisung

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Holger; Ramold, Mathias; Ettinger, Andreas [Siemens AG, Erlangen (Germany)

    2012-07-01

    The share of distributed renewable generation is dramatically growing since years in Germany due to the existing subsidies for renewable energy sources. As a consequence the existing distribution networks and primarily the low-voltage (LV) networks have to change to maintain the same degree of power quality and security of supply. This paper described resulting new challenges, which will have a major impact on the distribution networks. To solve the problems today utilities are mainly focussing on conventional measures, like network extension or adding new substation. Compared to this classical measures new solutions and technologies are described. These solutions shall enable the distribution network operators (DSO) to optimize the necessary investment costs. Finally the main described solutions will be evaluated and compared to the conventional measures using three typical and realistic LV networks. For each network the share of renewable energy is adjusted in different steps and the impact on the network is assessed taking into account the technical as well as the economic behaviour. (orig.)

  20. Technical assessment of forest road network using Backmund and surface distribution algorithm in a hardwood forest of Hyrcanian zone

    Energy Technology Data Exchange (ETDEWEB)

    Parsakhoo, P.

    2016-07-01

    Aim of study: Corrected Backmund and Surface Distribution Algorithms (SDA) for analysis of forest road network are introduced and presented in this study. Research was carried out to compare road network performance between two districts in a hardwood forest. Area of study: Shast Kalateh forests, Iran. Materials and methods: In uncorrected Backmund algorithm, skidding distance was determined by calculating road density and spacing and then it was designed as Potential Area for Skidding Operations (PASO) in ArcGIS software. To correct this procedure, the skidding constraint areas were taken using GPS and then removed from PASO. In SDA, shortest perpendicular distance from geometrical center of timber compartments to road was measured at both districts. Main results: In corrected Backmund, forest openness in district I and II were 70.3% and 69.5%, respectively. Therefore, there was little difference in forest openness in the districts based on the uncorrected Backmund. In SDA, the mean distance from geometrical center of timber compartments to the roads of districts I and II were 199.45 and 149.31 meters, respectively. Forest road network distribution in district II was better than that of district I relating to SDA. Research highlights: It was concluded that uncorrected Backmund was not precise enough to assess forest road network, while corrected Backmund could exhibit a real PASO by removing skidding constraints. According to presented algorithms, forest road network performance in district II was better than district I. (Author)

  1. Families of Fokker-Planck equations and the associated entropic form for a distinct steady-state probability distribution with a known external force field.

    Science.gov (United States)

    Asgarani, Somayeh

    2015-02-01

    A method of finding entropic form for a given stationary probability distribution and specified potential field is discussed, using the steady-state Fokker-Planck equation. As examples, starting with the Boltzmann and Tsallis distribution and knowing the force field, we obtain the Boltzmann-Gibbs and Tsallis entropies. Also, the associated entropy for the gamma probability distribution is found, which seems to be in the form of the gamma function. Moreover, the related Fokker-Planck equations are given for the Boltzmann, Tsallis, and gamma probability distributions.

  2. Thermal Power Systems, Point-Focusing Distributed Receiver Technology Project. Annual technical report, Fiscal Year 1978. Volume II. Detailed report

    Energy Technology Data Exchange (ETDEWEB)

    1979-03-15

    Thermal or electrical power from the sun's radiated energy through Point-Focusing Distributed Receiver technology is the goal of this Project. The energy thus produced must be economically competitive with other sources. This Project supports the industrial development of technology and hardware for extracting energy from solar power to achieve the stated goal. Present studies are working to concentrate the solar energy through mirrors or lenses, to a working fluid or gas, and through a power converter change it to an energy source useful to man. Rankine-cycle and Brayton-cycle engines are currently being developed as the most promising energy converters for our near future needs. Accomplishments on point-focusing technology in FY 1978 are detailed.

  3. Ultrafast and widely tuneable vertical-external-cavity surface-emitting laser, mode-locked by a graphene-integrated distributed Bragg reflector.

    Science.gov (United States)

    Zaugg, C A; Sun, Z; Wittwer, V J; Popa, D; Milana, S; Kulmala, T S; Sundaram, R S; Mangold, M; Sieber, O D; Golling, M; Lee, Y; Ahn, J H; Ferrari, A C; Keller, U

    2013-12-16

    We report a versatile way of controlling the unsaturated loss, modulation depth and saturation fluence of graphene-based saturable absorbers (GSAs), by changing the thickness of a spacer between a single layer graphene (SLG) and a high-reflection mirror. This allows us to modulate the electric field intensity enhancement at the GSA from 0 up to 400%, due to the interference of incident and reflected light at the mirror. The unsaturated loss of the SLG-mirror-assembly can be reduced to ∼0. We use this to mode-lock a vertical-external-cavity surface-emitting laser (VECSEL) from 935 to 981 nm. This approach can be applied to integrate SLG into various optical components, such as output coupler mirrors, dispersive mirrors or dielectric coatings on gain materials. Conversely, it can also be used to increase the absorption (up to 10%) in various graphene based photonics and optoelectronics devices, such as photodetectors.

  4. Technical Evaluation of Superconducting Fault Current Limiters Used in a Micro-Grid by Considering the Fault Characteristics of Distributed Generation, Energy Storage and Power Loads

    Directory of Open Access Journals (Sweden)

    Lei Chen

    2016-09-01

    Full Text Available Concerning the development of a micro-grid integrated with multiple intermittent renewable energy resources, one of the main issues is related to the improvement of its robustness against short-circuit faults. In a sense, the superconducting fault current limiter (SFCL can be regarded as a feasible approach to enhance the transient performance of a micro-grid under fault conditions. In this paper, the fault transient analysis of a micro-grid, including distributed generation, energy storage and power loads, is conducted, and regarding the application of one or more flux-coupling-type SFCLs in the micro-grid, an integrated technical evaluation method considering current-limiting performance, bus voltage stability and device cost is proposed. In order to assess the performance of the SFCLs and verify the effectiveness of the evaluation method, different fault cases of a 10-kV micro-grid with photovoltaic (PV, wind generator and energy storage are simulated in the MATLAB software. The results show that, the efficient use of the SFCLs for the micro-grid can contribute to reducing the fault current, improving the voltage sags and suppressing the frequency fluctuations. Moreover, there will be a compromise design to fully take advantage of the SFCL parameters, and thus, the transient performance of the micro-grid can be guaranteed.

  5. Spatio-Temporal Distribution of Total Nitrogen and Phosphorus in Dianshan Lake, China: The External Loading and Self-Purification Capability

    Directory of Open Access Journals (Sweden)

    Guohua Xiong

    2017-03-01

    Full Text Available In this article, long-term data, statistical analysis, and spatial interpolation method were applied to the analyses of the spatial and temporal changes of total nitrogen (TN and total phosphorus (TP in Dianshan Lake. We also estimated the self-purification capability of TN and TP in Dianshan Lake. The results showed that interannual variability of the average concentration of TN in Dianshan Lake changed significantly, showing a characteristic increase before a decline, and the average concentration of TN showed an obvious downward trend, especially after 2007. Interannual variability of the average concentration of TP in Dianshan Lake fluctuated, and the average concentration of TP showed a downward trend after 2007. The seasonal variations of TN and TP in Dianshan Lake were similar. Higher TN concentration occurred in winter and spring, while higher TP concentration appeared in summer, autumn, and winter. The spatial distribution of TN and TP in Dianshan Lake were similar, showing a characteristic which decreased from north to south and west to east. The highest TN and TP values were mainly distributed in the inlet monitoring sites, while the lowest TP values were distributed in the outlet monitoring sites. The self-purification capability of TN and TP were about 2289.97 t/yr and 112.16 t/yr, which suggested a deterioration of natural water quality. Our research showed that Dianshan Lake was highly eutrophic and that water quality showed a substantial improvement from 1996 to 2015.

  6. Electric power distribution technical losses

    OpenAIRE

    Deksnys, Rimantas Pranas; Staniulis, Robertas

    2006-01-01

    Elektros energijos sąnaudos yra neišvengiamos gaminant, perduodant ir skirstant elektros energiją. Šios sąnaudos gali būti apibrėžiamos kaip patiektos į elektros tinklus ir vartotojų apskaitytos bei apmokėtos energijos skirtumas. Elektros energijos sąnaudos yra skirstomos į technologines, susijusias su sąnaudomis tinklo elementuose, ir komercines, susijusias su neapskaityta ir vartotojų neapmokėta elektros energija. Ataskaitinių ir technologinių sąnaudų apskaičiavimas leidžia skirstomojo tink...

  7. Theoretical and experimental investigations on the cooling capacity distributions at the stages in the thermally-coupled two-stage Stirling-type pulse tube cryocooler without external precooling

    Science.gov (United States)

    Tan, Jun; Dang, Haizheng

    2017-03-01

    The two-stage Stirling-type pulse tube cryocooler (SPTC) has advantages in simultaneously providing the cooling powers at two different temperatures, and the capacity in distributing these cooling capacities between the stages is significant to its practical applications. In this paper, a theoretical model of the thermally-coupled two-stage SPTC without external precooling is established based on the electric circuit analogy with considering real gas effects, and the simulations of both the cooling performances and PV power distribution between stages are conducted. The results indicate that the PV power is inversely proportional to the acoustic impedance of each stage, and the cooling capacity distribution is determined by the cold finger cooling efficiency and the PV power into each stage together. The design methods of the cold fingers to achieve both the desired PV power and the cooling capacity distribution between the stages are summarized. The two-stage SPTC is developed and tested based on the above theoretical investigations, and the experimental results show that it can simultaneously achieve 0.69 W at 30 K and 3.1 W at 85 K with an electric input power of 330 W and a reject temperature of 300 K. The consistency between the simulated and the experimental results is observed and the theoretical investigations are experimentally verified.

  8. The External Degree.

    Science.gov (United States)

    Houle, Cyril O.

    This book examines the external degree in relation to the extremes of attitudes, myths, and data. Emphasis is placed on the emergence of the American external degree, foreign external-degree programs, the purpose of the external degree, the current scene, institutional issues, and problems of general policy. (MJM)

  9. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scienti c distributed applications [1]. The survey established, arguably for the rst time, the relationship between infrastructure and scienti c distributed applications. It examined well known contributors to the complexity associated with infrastructure, such as inconsistent internal and external interfaces, and demonstrated the correlation with application brittleness. It discussed how infrastructure complexity reinforces the challenges inherent in developing distributed applications.

  10. Regulating multiple externalities

    DEFF Research Database (Denmark)

    Waldo, Staffan; Jensen, Frank; Nielsen, Max

    2016-01-01

    Open access is a well-known externality problem in fisheries causing excess capacity and overfishing. Due to global warming, externality problems from CO2 emissions have gained increased interest. With two externality problems, a first-best optimum can be achieved by using two regulatory instrume......Open access is a well-known externality problem in fisheries causing excess capacity and overfishing. Due to global warming, externality problems from CO2 emissions have gained increased interest. With two externality problems, a first-best optimum can be achieved by using two regulatory...

  11. ExternE National Implementation Finland

    Energy Technology Data Exchange (ETDEWEB)

    Pingoud, K.; Maelkki, H.; Wihersaari, M.; Pirilae, P. [VTT Energy, Espoo (Finland); Hongisto, M. [Imatran Voima Oy, Vantaa (Finland); Siitonen, S. [Ekono Energy Ltd, Espoo (Finland); Johansson, M. [Finnish Environment Institute, Helsinki (Finland)

    1999-07-01

    ExternE National Implementation is a continuation of the ExternE Project, funded in part by the European Commission's Joule III Programme. This study is the result of the ExternE National Implementation Project for Finland. Three fuel cycles were selected for the Finnish study: coal, peat and wood-derived biomass, which together are responsible for about 40% of total electricity generation in Finland and about 75% of the non-nuclear fuel based generation. The estimated external costs or damages were dominated by the global warming (GW) impacts in the coal and peat fuel cycles, but knowledge of the true GW impacts is still uncertain. From among other impacts that were valued in monetary terms the human health damages due to airborne emissions dominated in all the three fuel cycles. Monetary valuation for ecosystem impacts is not possible using the ExternE methodology at present. The Meri-Pori power station representing the coal fuel cycle is one of the world's cleanest and most efficient coal-fired power plants with a condensing turbine. The coal is imported mainly from Poland. The estimated health damages were about 4 mECU/kWh, crop damages an order of magnitude lower and damages caused to building materials two orders of magnitude lower. The power stations of the peat and biomass fuel cycles are of CHP type, generating electricity and heat for the district heating systems of two cities. Their fuels are of domestic origin. The estimated health damages allocated to electricity generation were about 5 and 6 mECU/kWh, respectively. The estimates were case-specific and thus an generalisation of the results to the whole electricity generation in Finland is unrealistic. Despite the uncertainties and limitations of the methodology, it is a promising tool in the comparison of similar kinds of fuel cycles, new power plants and pollution abatement technologies and different plant locations with each other. (orig.)

  12. ASH External Web Portal (External Portal) -

    Data.gov (United States)

    Department of Transportation — The ASH External Web Portal is a web-based portal that provides single sign-on functionality, making the web portal a single location from which to be authenticated...

  13. The Digital technical documentation handbook

    CERN Document Server

    Schultz, Susan I; Kavanagh, Frank X; Morse, Marjorie J

    1993-01-01

    The Digital Technical Documentation Handbook describes the process of developing and producing technical user information at Digital Equipment Corporation. * Discusses techniques for making user information _more effective * Covers the draft and reviewprocess, the production and distribution of printed and electronic media, archiving, indexing, testing for usability, and many other topics * Provides quality assurance checklists, contains a glossary and a bibliography of resources for technicalcommunicators

  14. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  15. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  16. Development of Mortar Simulator with Shell-In-Shell System – Problem of External Ballistics

    Directory of Open Access Journals (Sweden)

    A. Fedaravicius

    2007-01-01

    Full Text Available The shell-in-shell system used in the mortar simulator raises a number of non-standard technical and computational problems starting from the requirement to distribute the propelling blast energy between the warhead and the ballistic barrel, finishing with the requirement that the length of warhead's flight path must be scaled to combat shell firing tables. The design problem of the simulator is split into two parts – the problem of external ballistics where the initial velocities of the warhead must be determined, and the problem of internal ballistics – where the design of the cartridge and the ballistic barrel must be performed.

  17. ON ASSESSMNENT OF PHYSICAL WEAR IN ELEMENTS OF TECHNICAL DEVICES

    Directory of Open Access Journals (Sweden)

    S. N. Osipov

    2015-01-01

    Full Text Available Real assessment of wear in technical devices, construction structures, minings, their elements and connections is of great importance for provision of operational security and efficiency. Natural properties of the overwhelming majority of materials follow to probabilistic (stochastic laws due to various reasons (external influence, processing technologies and others. An assessment of physical wear rate of buildings and structures and their elements is carried out in the former republics of the USSR mainly in accordance with external physical signs (deflections, cracks, layer separations, etc. but wear percentage is often calculated on the basis of replacement cost in comparison with the initial one even without taking into account inflation which did not officially exist in the USSR. In this case destruction or failure of structure or their elements are considered as 100 % wear.The paper proposes a new methodology for assessment of physical wear rate in accordance with probability ratio of nofailure operation (reliability, minimum ratio is assigned to admissible limit value in conformity with technical requirements for the technical devices, construction structures, minings in question, their elements and connections. In this context minimum permissible wear probability (reliability is taken as 100 % wear rate and its initial index is considered as 0 % wear rate. That is why wear intensity in time depends on type of value probability distribution while determining the rate of physical property. The proposed methodology is intended for probabilistic wear assessment in case of relatively simple changes in strength properties of materials (for example, within the elastic limit.

  18. Final technical report for project titled Quantitative Characterization of Cell Aggregation/Adhesion as Predictor for Distribution and Transport of Microorganisms in Subsurface Environment

    Energy Technology Data Exchange (ETDEWEB)

    Gu, April Z. [Northeastern Univ., Boston, MA (United States); Wan, Kai-tak [Northeastern Univ., Boston, MA (United States)

    2014-09-02

    This project aims to explore and develop enabling methodology and techniques for nano-scale characterization of microbe cell surface contact mechanics, interactions and adhesion quantities that allow for identification and quantification of indicative properties related to microorganism migration and transport behavior in porous media and in subsurface environments. Microbe transport has wide impact and therefore is of great interest in various environmental applications such as in situ or enhanced subsurface bioremediation,filtration processes for water and wastewater treatments and protection of drinking water supplies. Although great progress has been made towards understanding the identities and activities of these microorganisms in the subsurface, to date, little is known of the mechanisms that govern the mobility and transport of microorganisms in DOE’s contaminated sites, making the outcomes of in situ natural attenuation or contaminant stability enhancement unpredictable. Conventionally, movement of microorganisms was believed to follows the rules governing solute (particle) transport. However, recent studies revealed that cell surface properties, especially those pertaining to cell attachment/adhesion and aggregation behavior, can cause the microbe behavior to deviate from non-viable particles and hence greatly influence the mobility and distribution of microorganisms in porous media.This complexity highlights the need to obtain detailed information of cell-cell and cell-surface interactions in order to improve and refine the conceptual and quantitative model development for fate and transport of microorganisms and contaminant in subsurface. Traditional cell surface characterization methods are not sufficient to fully predict the deposition rates and transport behaviors of microorganism observed. A breakthrough of methodology that would allow for quantitative and molecular-level description of intrinsic cell surface properties indicative for cell

  19. Tracing Graduates through Reunion Parties: Secondary Technical Education in Mozambique.

    Science.gov (United States)

    Ziderman, Adrian

    1997-01-01

    A review of enrollments, graduates, and costs for Mozambique secondary technical schools and the results of a follow-up employment survey conducted at graduate reunion parties indicate low internal and external efficiency and high unit costs in the technical education system, particularly "basic" technical schools. Three possible types…

  20. External radiation surveillance

    Energy Technology Data Exchange (ETDEWEB)

    Antonio, E.J.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report describes how external radiation was measured, how surveys were performed, and the results of these measurements and surveys. External radiation exposure rates were measured at locations on and off the Hanford Site using thermoluminescent dosimeters (TLD). External radiation and contamination surveys were also performed with portable radiation survey instruments at locations on and around the Hanford Site.

  1. Influences of Fog-Haze on External Insulation of Transmission and Distribution Equipments%雾霾天气对输变电设备外绝缘的影响

    Institute of Scientific and Technical Information of China (English)

    宿志一

    2013-01-01

      从输变电设备防污闪角度讲,雾霾与传统的湿沉降、污(脏)雾是同一概念。雾霾对输变电设备外绝缘影响的研究,主要包括雾霾的理化特征、雾霾对绝缘子表面污秽度的影响、雾霾的模拟及其对绝缘子污闪电压的影响等内容。文章重点介绍了20世纪90年代以来北京、上海两地开展的试验研究工作:大气污染易演变成霾与雾霾天气,导致输变电设备外绝缘表面湿沉降的增加。雾霾脏污程度可用雾水电导率表征,雾霾的持续作用可使绝缘子表面污秽度有限增大,绝缘子污闪电压有所降低。近年来,国网公司系统坚持“绝缘到位,留有裕度”的防污闪方针,成功地抵御了雾霾天气对输变电设备的侵袭,遏制了大面积污闪事故的发生,线路污闪跳闸率降至历史最低水平。%In the viewpoint of preventing pollution flashover occurred on transmission and distribution equipments, the fog-haze is of the same concept as the traditional concept for wet deposition and dust fog. The research on the influences of fog-haze on external insulation of transmission and distribution equipments mainly includes the physical and chemical features of the fog-haze, the influence of the fog-haze on contamination level of insulator surface, the simulation of the fog-haze and its influence on pollution flashover voltage of insulators. The achievements of experimental research on the fog-haze performed in Shanghai and Beijing since 1990s are emphatically presented: atmospheric pollution easily evolves into the haze or the fog-haze weather, and it makes the increase of wet deposition on external insulation surfaces of transmission and distribution equipments; the smudgy degree caused by fog-haze can be characterized by fog conductivity;the sustained action of fog-haze makes the degree of contamination on insulator surfaces limitedly increased, so the pollution flashover voltage of

  2. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    The actors of the building industry have access to a range of Information and Communication Technologies (ICTs), and are constantly presented with new software and new communications platforms. Through case studies, and inspired by sociotechnical approaches to the study of emerging technologies......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role...

  3. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    , this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references......The actors of the building industry have access to a range of Information and Communication Technologies (ICTs), and are constantly presented with new software and new communications platforms. Through case studies, and inspired by sociotechnical approaches to the study of emerging technologies...... to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role...

  4. Temperature distribution of external thermal insulation systems under the attack of window spill plume%窗口火作用下外保温系统温度分布特性

    Institute of Scientific and Technical Information of China (English)

    邓小兵; 赵成刚; 卢国建; 刘松林; 曾续斌

    2013-01-01

    采用真实尺度的3层建筑进行窗口火实体火灾实验,研究模塑聚苯乙烯(EPS)、挤塑聚苯乙烯(XPS)、聚氨酯(PUR)和酚醛(PF)等4种典型保温泡沫层的外墙外保温系统温度及室内温度的分布特性.研究结果表明:XPS和PF系统表面在横向立面上维持较高温度,EPS和PUR系统远离角落的区域表面温度较低且随着横向距离增大明显降低;热塑性外保温系统的内部温度明显高于热固性外保温系统;第2层和第3层距楼板高度0.9m以下的室内区域烟气温度暴露风险较小,但2层0.9m高度以上、3层1.8m高度以上的区域以及窗户区域均存在较高温度暴露风险.%Results of real scale window spill plume tests in a 3-story building are reported on four external insulation systems with insulation materials of expanded polystyrene foam (EPS),extruded polystyrene foam (XPS),polyurethane foam (PUR) and phenolic foam (PF).The research was focused on the examination of the temperature distribution of external thermal insulation system itself and its connected internal rooms.The tests showed that the lateral system surface temperatures of XPS and PF system were higher than EPS and PF system,and the latter showed a trend to decrease along with the lateral surface; Thermoplastic systems showed higher internal temperature than thermosetting systems; Internal area of the 2nd and 3rd story had relatively lower temperature exposure risk below 0.9 m height,however,areas above 0.9 m height of 2nd story and 1.8 m height of 3rd story and the window areas of 2nd and 3rd story all had high temperature exposure risk.

  5. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  6. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  7. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  8. 4th. technical meeting of distribution electric power and installations for the users; 4as jornadas tecnicas de redes electricas de distribucion e instalaciones de usuarios

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The present report announces the 4th meeting on distribution of electric power and the facilities for the users. The meeting. Will be celebrate on October and it main objective is to exchange. The information of distribution of electric power. (Author)

  9. [Inhalation therapy: inhaled corticosteroids in ENT, development and technical challenges of powder inhalers, nebulisers synchronized with breathing and aerosol size distribution. GAT aerosolstorming, Paris 2012].

    Science.gov (United States)

    Le Guen, P; Peron, N; Durand, M; Pourchez, J; Cavaillon, P; Reychler, G; Vecellio, L; Dubus, J-C

    2013-10-01

    The working group on aerosol therapy (GAT) of the Société de Pneumologie de Langue Française (SPLF) has organized its third Aerosolstorming in 2012. During one single day, different aspects of inhaled therapies have been treated and are detailed in two articles, this one being the second. This text deals with the indications of inhaled corticosteroids in ENT, the development and technical challenges of powder inhalers, the advantages and disadvantages of each type of technologies to measure the particle sizes of inhaled treatments.

  10. Phase 1 of the First Solar Small Power System Experiment (experimental System No. 1). Volume 1: Technical Studies for Solar Point-focusing, Distributed Collector System, with Energy Conversion at the Collector, Category C

    Science.gov (United States)

    Clark, T. B. (Editor)

    1979-01-01

    The technical and economic feasibility of a solar electric power plant for a small community is evaluated and specific system designs for development and demonstration are selected. All systems investigated are defined as point focusing, distributed receiver concepts, with energy conversion at the collector. The preferred system is comprised of multiple parabolic dish concentrators employing Stirling cycle engines for power conversion. The engine, AC generator, cavity receiver, and integral sodium pool boiler/heat transport system are combined in a single package and mounted at the focus of each concentrator. The output of each concentrator is collected by a conventional electrical distribution system which permits grid-connected or stand-alone operation, depending on the storage system selected.

  11. USACE AIS Transmit Technical Support Summary Report

    Science.gov (United States)

    2014-09-01

    USACE AIS Transmit Technical Support Summary Report Distribution Statement A: Approved for public release; distribution is unlimited...September 2014 Report No. CD-D-09-15 USACE AIS Transmit Technical Support Summary Report ii UNCLAS//Public | CG-926 RDC | I. Gonin et al. Public...States Coast Guard Research & Development Center 1 Chelsea Street New London, CT 06320 USACE AIS Transmit Technical Support Summary Report

  12. Technical realization platform for a cross-linked market participation of prosumers in the power distribution system; Technische Realisierungsplattform zur vernetzten Marktteilnahme von Prosumern im Verteilernetz

    Energy Technology Data Exchange (ETDEWEB)

    Gantert, Wolf-Christian; Neun, Guido; Boers, Dave J. [QNE GmbH und Co. KG, Oldenburg (Germany)

    2011-07-01

    The authors of the contribution under consideration present a platform for the active participation of consumers and producers at the decentralized energy market with dynamic pricing of the electricity. A profitable operation of these prosumers is a prerequisite for their widespread market participation. The authors describe in detail the technical barriers for the market participation of the prosumer and develop a possible approach for the technical realization of the integrated market access. Markets with decentralized structures require a dedicated infrastructure of communication. In this case the proven key technology of the Internet Protocol is used. This requires an IP enabled network component in decentralized systems. The Internet-based connection of consumers and producers enables an automated participation in energy markets. In order to ensure a security of supply, such a scheme has to meet real-time criteria and high security requirements. When communicating via the Internet the accessibility of each plant from everywhere can be realized. This enables a cross-regional clustering of prosumers who otherwise would be excluded by market entry barriers to an active participation in the energy market. For the creation of a market any prosumer must have the free choice of the trading platform. The authors discuss the resulting additional demands on the system architecture.

  13. Fuel distribution logistics in Brazil: technical and economic aspects; Aspectos tecnico-economicos da logistica da distribuicao de combustiveis no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Esteves, Heloisa Borges B.; Bicalho, Lucia N. [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    In Brazil, there are around 250 companies operating in the automotive fuel distribution segment, responsible for the automotive fuels wholesale commercialization activity. Those companies supply not only gas stations, but also final consumers and TRR's. Their clients are distributed regionally, which requires flexibility and the ability to supply clients efficiently at the smaller possible cost, transforming variables such as the transportation alternatives adopted, the location of the storage facilities and its correct dimension on key decisions. This paper analyses the general scenario of the fuels distribution logistics in Brazil from a economic perspective, and its impacts on the companies competitive strategies. (author)

  14. Externally Verifiable Oblivious RAM

    Directory of Open Access Journals (Sweden)

    Gancher Joshua

    2017-04-01

    Full Text Available We present the idea of externally verifiable oblivious RAM (ORAM. Our goal is to allow a client and server carrying out an ORAM protocol to have disputes adjudicated by a third party, allowing for the enforcement of penalties against an unreliable or malicious server. We give a security definition that guarantees protection not only against a malicious server but also against a client making false accusations. We then give modifications of the Path ORAM [15] and Ring ORAM [9] protocols that meet this security definition. These protocols both have the same asymptotic runtimes as the semi-honest original versions and require the external verifier to be involved only when the client or server deviates from the protocol. Finally, we implement externally verified ORAM, along with an automated cryptocurrency contract to use as the external verifier.

  15. External Beam Therapy (EBT)

    Science.gov (United States)

    ... Esophageal Cancer Treatment Head and Neck Cancer Treatment Lung Cancer Treatment Prostate Cancer Treatment Brain Tumor Treatment Why is ... Radiation Oncology) Breast Cancer Treatment Esophageal Cancer Treatment Lung Cancer Treatment Images related to External Beam Therapy (EBT) Sponsored ...

  16. MALIGNANT EXTERNAL OTITIS

    OpenAIRE

    Massoud Moghaddam

    1993-01-01

    Two case reports of malignant external otitis in the elderly diabetics and their complications and management with regard to our experience at Amir Alam Hospital, Department of ENT will be discussed here.

  17. Checklists for external validity

    DEFF Research Database (Denmark)

    Dyrvig, Anne-Kirstine; Kidholm, Kristian; Gerke, Oke;

    2014-01-01

    RATIONALE, AIMS AND OBJECTIVES: The quality of the current literature on external validity varies considerably. An improved checklist with validated items on external validity would aid decision-makers in judging similarities among circumstances when transferring evidence from a study setting...... to an implementation setting. In this paper, currently available checklists on external validity are identified, assessed and used as a basis for proposing a new improved instrument. METHOD: A systematic literature review was carried out in Pubmed, Embase and Cinahl on English-language papers without time restrictions....... The retrieved checklist items were assessed for (i) the methodology used in primary literature, justifying inclusion of each item; and (ii) the number of times each item appeared in checklists. RESULTS: Fifteen papers were identified, presenting a total of 21 checklists for external validity, yielding a total...

  18. Sen cycles and externalities

    OpenAIRE

    Piggins, Ashley; Salerno, Gillian

    2016-01-01

    It has long been understood that externalities of some kind are responsible for Sen’s (1970) theorem on the impossibility of a Paretian liberal. However, Saari and Petron (2006) show that for any social preference cycle generated by combining the weak Pareto principle and individual decisiveness, every decisive individual must suffer at least one strong negative externality. We show that this fundamental result only holds when individual preferences are strict. Building on their contribution,...

  19. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  20. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  1. Life cycle assessment of waste management systems: Assessing technical externalities

    DEFF Research Database (Denmark)

    Brogaard, Line Kai-Sørensen

    from the LCAs of full waste management systems revealed that capital goods should be included in future LCAs. The impact share of capital goods was highest for resource depletion and the impacts of toxicity on humans and ecosystems. To evaluate the quality and consistency of available data...... for the primary and secondary production of materials, 366 datasets were gathered. The materials in focus were: paper, newsprint, cardboard, corrugated board, glass, aluminium, steel and plastics (HDPE, LDPE, LLDPE, PET, PS, PVC). Only one quarter of these data concerned secondary production, thus underlining...... a severe lack of data for these production processes. The results showed large variations in CO2 emissions from the production of each of the evaluated materials. An evaluation of the data revealed that energy systems are central to impacts and are thereby important to specify as background information...

  2. Technical considerations in the use of external condom catheter systems.

    Science.gov (United States)

    deHoll, J D; Williams, L A; Steers, W D; Rodeheaver, G T; Clark, M M; Edlich, R F

    1992-01-01

    Since the advent of rehabilitation engineering new advances have been made that have revolutionized condom catheter drainage systems (CCDS). An innovative CCDS has been designed that ensures unobstructed urine flow. Its condom catheter has several unique design features. It has a double row of convolutions near the catheter tip that prevent kinking and twisting so that the pathway remains open. The condom catheter features a unique inner flap that fits snugly on the glans to prevent backflow of urine on the shaft. This condom catheter is connected to a vented leg bag that eliminates the development of a partial vacuum in the connecting tube. This vacuum can create siphoning, which in turn interferes with urine flow into the leg bag. In addition, a new rechargeable battery-operated clipper has been developed that makes nick-free hair removal from the genitals exceptionally easy. This atraumatic hair removal eliminates the pubic hair that becomes trapped under the condom catheter. The clinical impact of these new advances in CCDS requires further investigation.

  3. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) size="2">(1journée) Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Shor...

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

  5. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  6. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  7. 岩棉钢网架板外墙外保温技术性能及应用分析%Analysis on technical properties and application of outer-wall external thermal insulation based on rock wool board with steel network

    Institute of Scientific and Technical Information of China (English)

    杜书廷

    2012-01-01

    对岩棉钢网架板外墙外保温技术的原理、特点、构造及性能要求做了系统的介绍,并对该技术的施工过程和未来应用进行了分析.岩棉钢网架板外墙外保温具有较好的防火性能、墙体的平均传热系数在0.35~0.50 W/(m2·K),绝热效果良好,采用把岩棉板固定于钢网架内,解决了岩棉板下坠的问题,系统的抗拉强度高、整体性和耐久性良好,使用年限可达25年以上.该技术在以后的工程实践中应需注意岩棉板的市场供应、面砖缝隙开裂、岩棉板吸水问题及岩棉板加工和施工中对人的影响等问题.%Technology principle, characteristics, technical structure, performance requirements of outer-wall external thermal insulation based on rock wool board with steel network are introduced, the construction process and application in the future of this technology was analyzed. Outer-wall external thermal insulation based on rock wool board has good fire performance, the average heat transfer coefficient of the wall is 0.35 to 0.50 W/(m2 *K) ,and the insulation effect is good. Fixing the rock wool board in the steel network can address the fall of the rock wool board. The tensile strength, integrity and durability of the system are good, and the service life can be up to 25 years. During the engineering practice in future, special attention should be paid to the market supply of rock wool board, tile gap cracking, rock wool board water absorption problems and the impact of rock wool processing and construction on the people.

  8. Environmental external effects from wind power based on the EU ExternE methodology

    DEFF Research Database (Denmark)

    Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

    1998-01-01

    The European Commission has launched a major study project, ExternE, to develop a methodology to quantify externalities. A “National Implementation Phase”, was started under the Joule II programme with the purpose of implementing the ExternE methodology in all member states. The main objective...

  9. Combination of external loads

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, S.; Tarp Johansen, N.J.; Joergensen, H. [Forskningscenter Risoe, Roskilde (Denmark); Gravesen, H.; Soerensen, S.L. [Carl Bro, Glostrup (Denmark); Pedersen, J. [Elsam Engineering, Fredericia (Denmark); Zorn, R.; Hvidberg Knudsen, M. [DHI Water and Environment, Hoersholm (Denmark); Voelund, P. [Energi E2, Koebenhavn (Denmark)

    2003-09-01

    The project onbectives have been: To improve and consequently opimise the basis for design of offshore wind turbines. This is done through 1) mapping the wind, wave ice and current as well as correlations of these, and 2) by clarifyring how these external conditions transform into loads. A comprehensive effort has been made to get a thorough understanding of the uncertainties that govern the reliability of wind turbines with respect to wind and wave loading. One of the conclusions is that the reliability of wind turbines is generally lower, than the average reliability of building structures that are subject not only to environmental loads, which are very uncertain, but also imposed loads and self weight, which are less uncertain than the environmental loads. The implication is that, at the moment lower load partial safety factors for onshore wind turbines cannot be recommended. For the combination of wind and wave design loads the problem is twofold: 1). A very conservative design will be generated by simply adding the individual wind and wave design loads disregarding the independence of the short-term fluctuations of wind and wave loads. 2). Characteristic values and partial safety factors for wind and wave loads are not defined similarly. This implies that the reliability levels of turbine support structures subject to purely aerodynamic loads and subject to purely hydrodynamic loads are not identical. For the problem of combining aerodynamic design loads and hydrodynamic design loads two results have been obtained in the project: 1). By simple means a site specific wave load safety factor rendering the same safety level for hydrodynamic loads as for aerodynamic loads is derived, and next, by direct square summation of extreme fluctuations, the wind and wave load safety factors are weighted. 2). Under the assumptions that a deep water site is considered and that the wave loading is a fifty-fifty mix of drag and inertia the same wind and wave load safety factor

  10. How to Overcome Information Anxiety: Assignment and Use of DoD Distribution Statements for Technical Documents. Volume 2. Participant Manual

    Science.gov (United States)

    1998-05-01

    Washington, DC 20350 October 1991 The Reduction of Reverberation and Ambient Noise by Ocean Surface Films Distribution authorized to U.S. Government... soundtracks , musical compositions, Page 24 of 25 and adaptations; histories of departments, agencies, services or units thereof; surveys of

  11. Final Technical Report for Contract No. DE-EE0006332, "Integrated Simulation Development and Decision Support Tool-Set for Utility Market and Distributed Solar Power Generation"

    Energy Technology Data Exchange (ETDEWEB)

    Cormier, Dallas [San Diego Gas & Electric, CA (United States); Edra, Sherwin [San Diego Gas & Electric, CA (United States); Espinoza, Michael [San Diego Gas & Electric, CA (United States); Daye, Tony [Green Power Labs, San Diego, CA (United States); Kostylev, Vladimir [Green Power Labs, San Diego, CA (United States); Pavlovski, Alexandre [Green Power Labs, San Diego, CA (United States); Jelen, Deborah [Electricore, Inc., Valencia, CA (United States)

    2014-12-29

    This project will enable utilities to develop long-term strategic plans that integrate high levels of renewable energy generation, and to better plan power system operations under high renewable penetration. The program developed forecast data streams for decision support and effective integration of centralized and distributed solar power generation in utility operations. This toolset focused on real time simulation of distributed power generation within utility grids with the emphasis on potential applications in day ahead (market) and real time (reliability) utility operations. The project team developed and demonstrated methodologies for quantifying the impact of distributed solar generation on core utility operations, identified protocols for internal data communication requirements, and worked with utility personnel to adapt the new distributed generation (DG) forecasts seamlessly within existing Load and Generation procedures through a sophisticated DMS. This project supported the objectives of the SunShot Initiative and SUNRISE by enabling core utility operations to enhance their simulation capability to analyze and prepare for the impacts of high penetrations of solar on the power grid. The impact of high penetration solar PV on utility operations is not only limited to control centers, but across many core operations. Benefits of an enhanced DMS using state-of-the-art solar forecast data were demonstrated within this project and have had an immediate direct operational cost savings for Energy Marketing for Day Ahead generation commitments, Real Time Operations, Load Forecasting (at an aggregate system level for Day Ahead), Demand Response, Long term Planning (asset management), Distribution Operations, and core ancillary services as required for balancing and reliability. This provided power system operators with the necessary tools and processes to operate the grid in a reliable manner under high renewable penetration.

  12. Externality or sustainability economics?

    Energy Technology Data Exchange (ETDEWEB)

    Bergh, Jeroen C.J.M. van den [ICREA, Barcelona (Spain); Department of Economics and Economic History and Institute for Environmental Science and Technology, Universitat Autonoma de Barcelona (Spain)

    2010-09-15

    In an effort to develop 'sustainability economics' Baumgaertner and Quaas (2010) neglect the central concept of environmental economics-'environmental externality'. This note proposes a possible connection between the concepts of environmental externality and sustainability. In addition, attention is asked for other aspects of 'sustainability economics', namely the distinction weak/strong sustainability, spatial sustainability and sustainable trade, distinctive sustainability policy, and the ideas of early 'sustainability economists'. I argue that both sustainability and externalities reflect a systems perspective and propose that effective sustainability solutions require that more attention is given to system feedbacks, notably other-regarding preferences and social interactions, and energy and environmental rebound. The case of climate change and policy is used to illustrate particular statements. As a conclusion, a list of 20 insights and suggestions for research is offered. (author)

  13. Metasurface external cavity laser

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Luyao, E-mail: luyaoxu.ee@ucla.edu; Curwen, Christopher A.; Williams, Benjamin S. [Department of Electrical Engineering, University of California, Los Angeles, California 90095 (United States); California NanoSystems Institute, University of California, Los Angeles, California 90095 (United States); Hon, Philip W. C.; Itoh, Tatsuo [Department of Electrical Engineering, University of California, Los Angeles, California 90095 (United States); Chen, Qi-Sheng [Northrop Grumman Aerospace Systems, Redondo Beach, California 90278 (United States)

    2015-11-30

    A vertical-external-cavity surface-emitting-laser is demonstrated in the terahertz range, which is based upon an amplifying metasurface reflector composed of a sub-wavelength array of antenna-coupled quantum-cascade sub-cavities. Lasing is possible when the metasurface reflector is placed into a low-loss external cavity such that the external cavity—not the sub-cavities—determines the beam properties. A near-Gaussian beam of 4.3° × 5.1° divergence is observed and an output power level >5 mW is achieved. The polarized response of the metasurface allows the use of a wire-grid polarizer as an output coupler that is continuously tunable.

  14. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  15. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  16. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  17. Investigation of the particle size distribution and particle density characteristics of Douglas fir hogged fuel fly ash collected under known combustion conditions. Technical Progress Report No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Lang, A.J.; Junge, D.C.

    1978-12-01

    The increased interest in wood as a fuel source, coupled with the increasing demand to control the emission generated by wood combustion, has created a need for information characterizing the emissions that occur for given combustion conditions. This investigation characterizes the carbon char and inorganic fly ash size and density distribution for each of thirty-eight Douglas fir bark samples collected under known conditions of combustion.

  18. Distribution of marine birds on the mid- and North-Atlantic US outer continental shelf. Technical progress report, January 1978-July 1980

    Energy Technology Data Exchange (ETDEWEB)

    Powers, K.D.; Pittman, G.L.; Fitch, S.J.

    1980-09-01

    The species composition, distribution, and abundance of marine birds on continental shelf waters from Cape Hatteras to the Bay of Fundy were examined using ships-of-opportunity. Northern Fulmar, Cory's Shearwater, Greater Shearwater, Sooty Shearwater, Wilson's Storm-Petrel, Gannet, Red Phalarope, Great Black-backed Gull, Herring Gull, and Black-legged Kittiwake were the most abundant and common species. These species were ecologically dominant within the bird community in numbers and biomass. Georges Bank and Gulf of Marine regions generally had greatest estimates of standing stock and biomass; whereas, in the Middle Atlantic region these estimates were consistently lowest. Species diversity throughout the study area was greatest in spring and least in fall. Oceanic fronts at the continental shelf break and at Nantucket Shoals influenced the distribution of Wilson's Storm-Petrels and Red Phalaropes. Fishing activities were particularly important to Larus gull distribution. Fishes, squids, and crustaceans were the most important groups of prey items in diets of nine bird species. An oiled bird or pollution index was developed. According to the index, frequency of oiled birds was greatest in winter and spring, and gulls made up the majority of species with oiled plumages.

  19. Distribution and abundance of cetaceans in the north-central and western Gulf of Mexico. Final report. Volume 2. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Davis, R.W.; Fargion, G.S.

    1996-05-24

    The purpose of the study was to determine the distribution and abundance of cetaceans in areas potentially affected by future oil and gas activities along the continental slope of the north-central and western Gulf of Mexico. This 3.75 year project commenced 1 October 1991 and finished 15 July 1995. The study area was bounded by the Florida-Alabama border, the Texas-Mexico border, and the 100 m and 2,000 m isobaths. Cetacean distribution and abundance were determined from seasonal aerial and shipboard visual surveys and shipboard acoustic surveys. In addition, hydrographic data were collected in situ and by satellite remote sensing to characterize cetacean habitat. Finally, tagging and tracking of sperm whales using satellite telemetry was attempted. This volume summarizes the results of the study. Cetaceans were observed throughout the study area during all four seasons. Nineteen species were identified, including two species (melon-headed whales and Fraser`s dolphins) previously thought to be rare in the Gulf. Pantropical spotted dolphins, bottlenose dolphins, clymene dolphins, striped dolphins, Atlantic spotted dolphins, and melon-headed whales were the most common small cetaceans and the sperm whale was the most common large cetacean. The mean annual abundance for all cetaceans was estimated to be 19,198. Although the study area had complex and dynamic oceanography, bottom depth was the only environmental variable which correlated to cetacean distribution.

  20. Stochastic Control - External Models

    DEFF Research Database (Denmark)

    Poulsen, Niels Kjølstad

    2005-01-01

    This note is devoted to control of stochastic systems described in discrete time. We are concerned with external descriptions or transfer function model, where we have a dynamic model for the input output relation only (i.e.. no direct internal information). The methods are based on LTI systems...

  1. Productivity Change and Externalities

    DEFF Research Database (Denmark)

    Kravtsova, Victoria

    2014-01-01

    firms and the economy as a whole. The approach used in the current research accounts for different internal as well as external factors that individual firms face and evaluates the effect on changes in productivity, technology as well as the efficiency of domestic firms. The empirical analysis focuses...... change in different types of firms and sectors of the economy...

  2. Multiple external root resorption.

    Science.gov (United States)

    Yusof, W Z; Ghazali, M N

    1989-04-01

    Presented is an unusual case of multiple external root resorption. Although the cause of this resorption was not determined, several possibilities are presented. Trauma from occlusion, periodontal and pulpal inflammation, and resorption of idiopathic origin are all discussed as possible causes.

  3. Technical presentation

    CERN Multimedia

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  4. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  5. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  6. Technical presentation

    CERN Multimedia

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  7. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  8. Technical infrastructure monitoring at CERN

    CERN Document Server

    Stowisek, Jan; Suwalska, Anna

    2006-01-01

    The Technical Infrastructure Monitoring system (TIM) is used to monitor and control CERN's technical services from the CERN Control Centre (CCC). The system's primary function is to provide CCC operators with reliable real-time information about the state of the laboratory's extensive and widely distributed technical infrastructure. TIM is also used to monitor all general services required for the operation of CERN's accelerator complex and the experiments. A flexible data acquisition mechanism allows TIM to interface with a wide range of technically diverse installations, using industry standard protocols wherever possible and custom designed solutions where needed. The complexity of the data processing logic, including persistence, logging, alarm handling, command execution and the evaluation of datadriven business rules is encapsulated in the system's business layer. Users benefit from a suite of advanced graphical applications adapted to operations (synoptic views, alarm consoles, data analysis tools etc....

  9. External doses from radioactive fallout. Dosimetry and levels

    Energy Technology Data Exchange (ETDEWEB)

    Woehni, T.

    1995-12-31

    The design, manufacture and calibration of a TL-based dosemeter for measurement of low level external photon radiation are presented. The dosemeter is based on CaF{sub 2} with 2 mm brass filter for energy compensation. It is able to resolve a 8% dose increase relative to natural background radiation. With this dosemeter external dose measurements were made in 6 villages in a heavily contaminated region in Russia (Chernobyl fallout), in order to assess external doses to the population. The results were analyzed in the light of additional existing information on radioactive deposition, social habits, decontamination measures and other influencing technical and physical factors. The observed dose values were lower than theoretical estimates of external doses based on published values for external dose levels relative to the level of contamination. 84 refs., 7 figs., 5 tabs.

  10. External insulation with cellular plastic materials

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt; Nielsen, Anker

    2014-01-01

    External thermal insulation composite systems (ETICS) can be used as extra insulation of existing buildings. The system can be made of cellular plastic materials or mineral wool. There is a European Technical guideline, ETAG 004, that describe the tests that shall be conducted on such systems....... This paper gives a comparison of systems with mineral wool and cellular plastic, based on experience from practice and literature. It is important to look at the details in the system and at long time stability of the properties such as thermal insulation, moisture and fire. Investigation of fire properties...... insulation....

  11. Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

    Science.gov (United States)

    Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

    2017-08-26

    Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, pskills of the team leader. This may have important implications for training of CPR teams. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  12. Directed Technical Change and Climate Policy

    NARCIS (Netherlands)

    Otto, V.M.; Löschel, A.; Reilly, J.

    2006-01-01

    This paper studies the cost effectiveness of climate policy if there are technology externalities. For this purpose, we develop a forward-looking CGE model that captures empirical links between CO2 emissions associated with energy use, directed technical change and the economy. We find the cost-effe

  13. ExternE transport methodology for external cost evaluation of air pollution

    DEFF Research Database (Denmark)

    Jensen, S. S.; Berkowicz, R.; Brandt, J.

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summaris...

  14. External-Memory Multimaps

    CERN Document Server

    Angelino, Elaine; Mitzenmacher, Michael; Thaler, Justin

    2011-01-01

    Many data structures support dictionaries, also known as maps or associative arrays, which store and manage a set of key-value pairs. A \\emph{multimap} is generalization that allows multiple values to be associated with the same key. For example, the inverted file data structure that is used prevalently in the infrastructure supporting search engines is a type of multimap, where words are used as keys and document pointers are used as values. We study the multimap abstract data type and how it can be implemented efficiently online in external memory frameworks, with constant expected I/O performance. The key technique used to achieve our results is a combination of cuckoo hashing using buckets that hold multiple items with a multiqueue implementation to cope with varying numbers of values per key. Our external-memory results are for the standard two-level memory model.

  15. the impact of distribut impact of distribut impact of distributed ...

    African Journals Online (AJOL)

    eobe

    Keywords: distributed generation; wind energy; integration of renewable sources and technical losses. 1. .... Against this background, the objectives of this paper .... this is the subject of further research. Also the .... biomass, geothermal etc.

  16. AIR QUALITY CRITERIA FOR PARTICULATE MATTER, VOLUMES I-III, (EXTERNAL REVIEW DRAFT, 1995)

    Science.gov (United States)

    There is no abstract available for these documents. If further information is requested, please refer to the bibliographic citation and contact the Technical Information Staff at the number listed above.Air Quality Criteria for Particulate Matter, Volume I, Extern...

  17. Bibliography of Technical Reports 1992

    Science.gov (United States)

    1993-08-01

    This report should be cited as: Woods Hole Oceanoraphic Institution Technical Report WHOI-93-37. Approved for distribution Dr. / obert B. Gagosian XA...UNITED KINGDOM Library IFREMER Serials Department Centre de Brest Oregon State University Service Documentation - Publications Corvallis, OR 97331 BP 70

  18. DOE FINAL TECHNICAL REPORT RP

    Energy Technology Data Exchange (ETDEWEB)

    RUSS PETERMAN

    2012-01-01

    The City of Georgetown Utility Systems (GUS) patnered with the private sector, the American Public Power Association (APPA) and Southwestern University to design, construct, test and monitor a solar co-generation system directly connected to the GUS electric distribution system. This report consists of the Primary Technical Report and 3 attachments.

  19. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  20. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  1. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

  2. Bacterial and fungal genome detection PCR/NAT: discussion of the Mai 2015 distribution for external quality assessment of nucleic acid-based protocols in diagnostic medical microbiology by INSTAND e.V.

    OpenAIRE

    Reischl, U.; W. Schneider; Ehrenschwender, M; Hiergeist, A; Maaß, M.; Baier, M; Straube, E; Frangoulidis, D.; Grass, G.; von Buttlar, H; Fingerle, V.; A Sing; Jacobs, E; Reiter-Owona, I; Anders, A.

    2015-01-01

    This contribution provides an analysis report of the recent proficiency testing scheme "Bacterial and Fungal Genome Detection (PCR/NAT)". It summarizes some benchmarks and the overall assessment of results reported by all of the participating laboratories. A highly desired scheme for external quality assessment (EQAS) of molecular diagnostic methods in the field of medical microbiology was activated in 2002 by the German Society of Hygiene and Microbiology (DGHM) and is now organized by INST...

  3. Consultoria externa em reforma do Estado tem função técnica ou estratégica? Um estudo de caso Does external consultancy in State reform have a technical or a strategic role? A case study

    Directory of Open Access Journals (Sweden)

    Maria Eliza Gonçalves de Siqueira

    2008-02-01

    Full Text Available Este artigo analisa o papel da consultoria organizacional externa (GVconsult/FGV em dois projetos de desestatização previstos no Programa de Reforma do Estado de Pernambuco, no período 1999-2000: o da Centrais de Abastecimento de Pernambuco (Ceasa-PE e o do Centro de Convenções (Cecon. O caminho metodológico foi a aproximação gradativa ao objeto de estudo, partindo de suposições iniciais e pontos críticos que serviram de orientação para a investigação. O trabalho de campo foi constituído por 31 entrevistas semi-estruturadas, em três rodadas, e os textos submetidos a uma análise semântico-pragmática da conversação (Mattos, 2005. A história do caso mostrou que a consultoria organizacional exerceu função técnica auxiliar ao governo de Pernambuco no Programa de Reforma do Estado, de acordo com diretrizes bem definidas e limitações impostas pela equipe do governo. Constatou-se também que, apesar de os conceitos da Reforma do Estado de Pernambuco terem origem nas concepções de Estado dos mentores acadêmicos da FGV e esposadas pelo governo federal (1995-98, não foram os consultores da GVconsult que as trouxeram, mas, sim, os formuladores das políticas públicas do governo de Pernambuco que as colheram diretamente do governo federal e da FGV.This article analyzes the role of Getulio Vargas Foundation external organizational consultancy services (GVconsult, São Paulo, Brazil to two destatization projects in the Pernambuco State Reform Project during 1999-2000: at Pernambuco Produce Whole-sale Market (Ceasa-PE and at the Convention Center (Cecon. The methodological strategy was to gradually approach the object of study, so that initial assumptions and critical points guided the study. The fieldwork involved 31 semi-structured interviews, in three rounds, and the texts were submitted to a semantic and pragmatic conversation analysis (Mattos, 2005. The case history showed that the organizational consultancy had a

  4. Regularization by External Variables

    DEFF Research Database (Denmark)

    Bossolini, Elena; Edwards, R.; Glendinning, P. A.

    2016-01-01

    Regularization was a big topic at the 2016 CRM Intensive Research Program on Advances in Nonsmooth Dynamics. There are many open questions concerning well known kinds of regularization (e.g., by smoothing or hysteresis). Here, we propose a framework for an alternative and important kind of regula...... of regularization, by external variables that shadow either the state or the switch of the original system. The shadow systems are derived from and inspired by various applications in electronic control, predator-prey preference, time delay, and genetic regulation....

  5. Description of Fracture Systems for External Criticality Reports

    Energy Technology Data Exchange (ETDEWEB)

    Jean-Philippe Nicot

    2001-09-21

    The purpose of this Analysis/Model Report (AMR) is to describe probabilistically the main features of the geometry of the fracture system in the vicinity of the repository. They will be used to determine the quantity of fissile material that could accumulate in the fractured rock underneath a waste package as it degrades. This AMR is to feed the geochemical calculations for external criticality reports. This AMR is done in accordance with the technical work plan (BSC (Bechtel SAIC Company) 2001 b). The scope of this AMR is restricted to the relevant parameters of the fracture system. The main parameters of interest are fracture aperture and fracture spacing distribution parameters. The relative orientation of the different fracture sets is also important because of its impact on criticality, but they will be set deterministically. The maximum accumulation of material depends primarily on the fracture porosity, combination of the fracture aperture, and fracture intensity. However, the fracture porosity itself is not sufficient to characterize the potential for accumulation of a fracture system. The fracture aperture is also important because it controls both the flow through the fracture and the potential plugging of the system. Other features contributing to the void space such as lithophysae are also investigated. On the other hand, no analysis of the matrix porosity is done. The parameters will be used in sensitivity analyses of geochemical calculations providing actinide accumulations and in the subsequent Monte Carlo criticality analyses.

  6. Equilibrium research of Chengdu-Yangshan port area container collection and distribution system under external cost%外部成本下成都—洋山港区集装箱集疏运体系的均衡研究

    Institute of Scientific and Technical Information of China (English)

    董岗

    2011-01-01

    In order to realize optimization of collection and distribution system based on the existing infrastructure reserve of railway, highway, the Yangtze River waterway and inland waterway, etc, a Logit game model is constructed between sea-railway multimodal transport, road transport and water-water transfer combining with the container transport situation of Chengdu-Yangshan port area collection and distribution system. Nash equilibrium results are obtained through the analysis of parameter values. When external costs are not considered, the equilibrium transport charges, container amounts and proportions are close to the actual operational data of collection and distribution mode. When the external costs of traffic accident, noise and harmful gas emission are considered, the equilibrium transport charges all in-creas with the increase of the external costs, and the container amounts and proportions all change with the increase of the external costs, especially the container amounts and proportions of sea-railway multi-modal transport increase rapidly. Therefore, the external costs should be reasonablely internalized to ad-just the mode and optimize the system through market mechanism.%为在现有铁路、高速公路、长江水道及内河航道等基础设施存量的基础上实现集疏运体系的优化,针对成都—洋山港区的集装箱运输现状,构建集疏运体系内铁海联运、公路运输和水水中转的Logit博弈模型,通过对相应参数值进行纳什均衡分析后得出:不考虑外部成本时,各种集疏运方式的均衡运输费用、集装箱箱量及所占比率与实际运营数据基本吻合;而在依次考虑交通事故、噪声污染、有害气体排放等外部成本时,均衡运输费用皆随之增加,而集装箱箱量和比率则随之变化,其中铁海联运的箱量和比率迅速增加.因此,外部成本应合理内部化,以通过市场机制实现集疏运的方式调整和体系优化.

  7. External Measures of Cognition

    Directory of Open Access Journals (Sweden)

    Osvaldo eCairo

    2011-10-01

    Full Text Available The human brain is undoubtedly the most impressive, complex and intricate organ that has evolved over time. It is also probably the least understood, and for that reason, the one that is currently attracting the most attention. In fact, the number of comparative analyses that focus on the evolution of brain size in Homo sapiens and other species has increased dramatically in recent years. In neuroscience, no other issue has generated so much interest and been the topic of so many heated debates as the difference in brain size between socially defined population groups, both its connotations and implications. For over a century, external measures of cognition have been related to intelligence. However, it is still unclear whether these measures actually correspond to cognitive abilities. In summary, this paper must be reviewed with this premise in mind.

  8. Analysis of Air Flow in the Ventilated Insulating Air Layer of the External Wall

    Science.gov (United States)

    Katunská, Jana; Bullová, Iveta; Špaková, Miroslava

    2016-12-01

    The paper deals with problems of impact of air flow in ventilated insulating air layer of the external wall on behaviour of thermal-technical parameters of the proposed external structure (according principles of STN 73 0549, which is not valid now), by comparing them in the calculation according to the valid STN standards, where air flow in the ventilated air layer is not taken into account, as well as by comparing them with behavior of thermal-technical parameters in the proposal of sandwich external wall with the contact heat insulation system without air cavity.

  9. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Wednesday 19 November From 9:30 to 17:30 - IT Amphitheatre bldg.31 3-004 2003 Data Transmission Design Seminar - TEXAS INSTRUMENTS The one-day 2003 Data Transmission Design Seminar is part of a series of technical seminars produced by Texas Instruments. This series of seminars will introduce system solutions based on different standards according to their respective requirements. It will include topics containing a blend of basic principles and hands-on application examples, along with layout-guidelines. • Basics and Practical Examples of Data-Transmission • Low Voltage Differential Signaling (LVDS) • Connectivity and PC-based Links • Industrial Interfaces • Parallel Bus Systems and Clock-Distribution-Circuits (CDC) This Seminar will be of interest to hardware designers and system engineers dealing with the realization of system- or board-level interfaces based on various transmission standards. Language: English Free seminar, no registration Organiser: John ...

  10. External meeting: Geneva University

    CERN Multimedia

    2006-01-01

    ECOLE DE PHYSIQUE Département de physique nucléaire et corspusculaire 24, Quai Ernest-Ansermet1211 GENEVE 4 - Tél : 022 379 62 73 - Fax: 022 379 69 92 Wednesday 24 May 2006 PARTICLE PHYSICS SEMINAR at 17:00 - Stückelberg Auditorium Physics Performances of CMS by Dr Albert De Roeck / CERN An overview will be given of the physics capabilities of the CMS detector at the LHC. CMS is now completing its Physics Technical Design reports, summarizing the expected detector performance in a first volume and the physics reach with up to 30 fb-1 in the second volume. Results on the performance of the CMS detector as obtained from detailed simulations are presented for realistic operating conditions, and validated where possible against test beam and cosmic ray data. Procedures to measure the performance from early LHC data will be described. Finally, a selected number of results from new physics studies will be presented. Information: http://dpnc.unige.ch/seminaire/annonce.html Organizer : J.-S. Graulich

  11. External fixators in haemophilia.

    Science.gov (United States)

    Lee, V; Srivastava, A; PalaniKumar, C; Daniel, A J; Mathews, V; Babu, N; Chandy, M; Sundararaj, G D

    2004-01-01

    External fixators (EF) are not commonly used for patients with haemophilia. We describe the use of EF (Ilizarov, AO- uni- and bi-planar fixators and Charnley clamp) in nine patients (mean age: 19.2 years; range: 9-37) with haemophilia for the following indications - arthrodesis of infected joints, treatment of open fractures and osteoclasis. EF required an average of nine skin punctures [range: 4-17 were maintained for a period of 15 weeks (range: 8-29.5), without regular factor replacement, till bone healing was adequate and were removed with a single dose of factor infusion]. The mean preoperative factor level achieved was 85% (range: 64-102%). Much lower levels were subsequently maintained till wound healing. The average total factor consumption was 430 IU kg(-1) (range: 240-870), administered over a period of 17 days (range: 9-44). There were no major complications related to EF except in a patient who developed inhibitors. In conclusion, EF can be used safely in haemophilic patients who do not have inhibitors and does not require prolonged factor replacement.

  12. Skepticism, contextualism, externalism and modality

    National Research Council Canada - National Science Library

    Ron Wilburn

    2006-01-01

    .... However, because efforts to contextualize externalism via subjunctive conditional analysis court circularity, it is only on an internalistic interpretation that contextualist strategies can even be motivated...

  13. Desiccant Dewpoint Cooling System Independent of External Water Sources

    DEFF Research Database (Denmark)

    Bellemo, Lorenzo; Elmegaard, Brian; Markussen, Wiebke B.

    2015-01-01

    This paper presents a patent pending technical solution aiming to make desiccant cooling systems independent of external water sources, hence solving problems of water availability, cost and treatment that can decrease the system attractiveness. The solution consists in condensing water from the ...... to the desiccant dew-point system without water recovery, the required regeneration temperature increases and the system thermal efficiency decreases.......This paper presents a patent pending technical solution aiming to make desiccant cooling systems independent of external water sources, hence solving problems of water availability, cost and treatment that can decrease the system attractiveness. The solution consists in condensing water from...... the air that regenerates the desiccant dehumidifier, and using it for running the evaporative coolers in the system. A closed regeneration circuit is used for maximizing the amount of condensed water. This solution is applied to a system with a desiccant wheel dehumidifier and a dew point cooler, termed...

  14. OAI and NASA's Scientific and Technical Information

    Science.gov (United States)

    Nelson, Michael L.; Rocker, JoAnne; Harrison, Terry L.

    2002-01-01

    The Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) is an evolving protocol and philosophy regarding interoperability for digital libraries (DLs). Previously, "distributed searching" models were popular for DL interoperability. However, experience has shown distributed searching systems across large numbers of DLs to be difficult to maintain in an Internet environment. The OAI-PMH is a move away from distributed searching, focusing on the arguably simpler model of "metadata harvesting". We detail NASA s involvement in defining and testing the OAI-PMH and experience to date with adapting existing NASA distributed searching DLs (such as the NASA Technical Report Server) to use the OAI-PMH and metadata harvesting. We discuss some of the entirely new DL projects that the OAI-PMH has made possible, such as the Technical Report Interchange project. We explain the strategic importance of the OAI-PMH to the mission of NASA s Scientific and Technical Information Program.

  15. 2013 Technical Roundtable

    Science.gov (United States)

    On December 9, 2013, EPA reconvened the study’s Technical Roundtable. Subject-matter experts discussed the outcomes of the 2013 Technical Workshops, stakeholder engagement, and plans for draft assessment report.

  16. Technical Assistance Plan (TAP)

    Science.gov (United States)

    A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

  17. Technical training - places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  18. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  19. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  20. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  1. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  2. ExternE transport methodology for external cost evaluation of air pollution

    DEFF Research Database (Denmark)

    Jensen, S. S.; Berkowicz, R.; Brandt, J.

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summaris...... how the methodology has been applied so far in a previous Danish study. Finally, results of a case study are reported. Exposure factors have been calculated for various urban categories in the Greater Copenhagen Area...

  3. ExternE transport methodology for external cost evaluation of air pollution (DK)

    Energy Technology Data Exchange (ETDEWEB)

    Solvang Jensen, S.; Berkowicz, R.; Brandt, J. [National Environmental Research Inst., Dept. of Atmospheric Environment (Denmark); Willumsen, E.; Kristensen, N.B. [COWI (Denmark)

    2004-07-01

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AiGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Inititally, a brief description of the ExternE Transport methodology is given and it is summarised how the methodology has been applied so far in a previous Danish study. Finally, results of a case study are reported. Exposure factors have been calculated for various urban categories in the Greater Copenhagen Area. (au)

  4. External coating of colonic anastomoses

    DEFF Research Database (Denmark)

    Pommergaard, Hans-Christian; Achiam, Michael Patrick; Rosenberg, Jacob

    2012-01-01

    Colon anastomotic leakage remains both a frequent and serious complication in gastrointestinal surgery. External coating of colonic anastomoses has been proposed as a means to lower the rate of this complication. The aim of this review was to evaluate existing studies on external coating of colonic...

  5. Retrofitting Systems for External Walls

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    In this report, 9 different external and internal retrofitting systems are analyzed using numerical calculations. The analysis focuses on the thermal bridge effects in the different systems, and on this basis it is discussed whether internal or external retrofitting has the most advantages...

  6. Performance Targets and External Benchmarking

    DEFF Research Database (Denmark)

    Friis, Ivar; Hansen, Allan; Vámosi, Tamás S.

    Research on relative performance measures, transfer pricing, beyond budgeting initiatives, target costing, piece rates systems and value based management has for decades underlined the importance of external benchmarking in performance management. Research conceptualises external benchmarking...... the conditions upon which the market mechanism is performing within organizations. This paper aims to contribute to research by providing more insight to the conditions for the use of external benchmarking as an element in performance management in organizations. Our study explores a particular type of external...... towards the conditions for the use of the external benchmarks we provide more insights to some of the issues and challenges that are related to using this mechanism for performance management and advance competitiveness in organizations....

  7. Teaching Technical Writing - Towards Technical Writing

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2000-01-01

    In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...... of technical writing....

  8. 76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2011-10-17

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29... addressing risks to reliability that were identified in earlier Commission technical conferences....

  9. Research on Relationship of Corporate External Governance and Technical Innovation Based on Transaction Cost Economics%基于交易成本经济学的外部治理与企业技术创新关系研究

    Institute of Scientific and Technical Information of China (English)

    史耀波; 邓朝晖; 杨水利

    2012-01-01

    外部治理机制缺失已成为我国公司治理机制构建中的瓶颈.以交易成本经济学为视角,从技术创新的资产专用性出发,探讨技术创新与公司外部治理的匹配问题,研究外部治理与企业技术创新的关系,对如何使技术创新与公司外部治理机制更好地匹配提出一些政策和建议,具有一定的借鉴意义.%The lack of external governance has become the bottleneck in the building of corporate governance mechanisms in domestic enterprise. The paper analysis the matching of technological innovation and external corporate governance from perspective of asset specificity based on transaction cost economics , thus investigate the relationship between external governance and technological innovation. Finally, some policy recommendations are put forward on how to make technological innovation and external governance mechanisms match better.

  10. External costs related to power production technologies. ExternE national implementation for Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Schleisner, L.; Sieverts Nielsen, P.

    1997-12-01

    The objective of the ExternE National Implementation project has been to establish a comprehensive and comparable set of data on externalities of power generation for all EU member states and Norway. The tasks include the application of the ExternE methodology to the most important fuel cycles for each country as well as to update the already existing results; to aggregate these site- and technology-specific results to more general figures. The current report covers the results of the national implementation for Denmark. Three different fuel cycles have been chosen as case studies. These are fuel cycles for an offshore wind farm and a wind farm on land, a decentralised CHP plant based on natural gas and a decentralised CHP plant based on biogas. The report covers all the details of the application of the methodology to these fuel cycles aggregation to a national level. (au) EU-JOULE 3. 59 tabs., 25 ills., 61 refs.

  11. External fuel thermionic reactor system.

    Science.gov (United States)

    Mondt, J. F.; Peelgren, M. L.

    1971-01-01

    Thermionic reactors are prime candidates for nuclear electric propulsion. The national thermionic reactor effort is concentrated on the flashlight concept with the external-fuel concept as the backup. The external-fuel concept is very adaptable to a completely modular power subsystem which is attractive for highly reliable long-life applications. The 20- to 25-cm long, externally-fueled converters have been designed, fabricated, and successfully tested with many thermal cycles by electrical heating. However, difficulties have been encountered during encapsulation for nuclear heated tests and none have been started to date. These nuclear tests are required to demonstrate the concept feasibility.

  12. Entrepreneurship and the Discipline of External Finance

    DEFF Research Database (Denmark)

    Nanda, Ramana

    I confirm the finding that the propensity to start a new firm rises sharply among those in the top five per­centiles of personal wealth. This pattern is more pronounced for entrants in less capital intensive sectors. Prior to entry, founders in this group earn about 6% less compared to those who ......, these findings suggest that the spike in entry at the top end of the wealth distribution is driven by low-ability individuals who can afford to start (and sometimes continue running) weaker firms because they do not face the discipline of external finance....

  13. EXTERNAL AND INTERNAL CONTROL IN PLANT DEVELOPMENT

    Institute of Scientific and Technical Information of China (English)

    Beáta Oborny

    2003-01-01

    Bodies of plants are modularly organized. Development proceeds by adding new modules to open endings with a potential for branching. Each module is autonomous to some extent. Development relies on the self-organized patterns that emerge from the interactions of individual modules. Interactions include both competition and cooperation, and several types of positive and negative feedback loops are involved. Development can be open to external influences, thus enabling the plant to adjust its form to the environment, for example, to the spatial distribution of ecological resources. This paper provides a review on adaptive plasticity in plants.

  14. External costs related to power production technologies. ExternE national implementation for Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Schleisner, L.; Sieverts Nielsen, P. [eds.

    1997-12-01

    The objective of the ExternE National Implementation project has been to establish a comprehensive and comparable set of data on externalities of power generation for all EU member states and Norway. The tasks include the application of the ExternE methodology to the most important fuel cycles for each country as well as to update the already existing results, to aggregate these site- and technology-specific results to more general figures. The current report covers the detailed information concerning the ExternE methodology. Importance is attached to the computer system used in the project and the assessment of air pollution effects on health, materials and ecological effects. Also the assessment of global warming damages are described. Finally the report covers the detailed information concerning the national implementation for Denmark for an offshore wind farm and a wind farm on land, a decentralised CHP plant based on natural gas and a decentralised CHP plant base on biogas. (au) EU-JOULE 3. 79 tabs., 11 ills., 201 refs.

  15. External Force Damage Simulation of Submarine High-voltage Cable Based on Distributed Fiber Optic Sensor Technology%基于分布式光纤传感技术的高压海底电缆外力损坏仿真

    Institute of Scientific and Technical Information of China (English)

    陆莹; 黄辉

    2012-01-01

    高压海底电缆的安全稳定运行对于海上能源的开发具有重要的作用,海缆电缆的损坏主要由外力引起,针对分布式光纤传感器在线监测高压海底电缆运行状况的方法,利用有限元软件ANSYS建立XLPE高压海底电缆模型,仿真分析海底电缆受到外力损坏时,内部物理量的变化,为分布式光纤传感器在线监测高压海底电缆运行状态提供参考。%Safety and stable operation of submarine high-voltage cable has played an important role in the development of Marine energy. However, submarine high-voltage cable was mainly damaged by external forces. According to the method for operation state of submarine high-voltage cable using on-line monitoring technology based on distributed fiber optic sensor, the model of the XLPE submarine high-voltage cable was gained by using finite element software ANSYS. Then, based on the model, the change of internal physical quantities were researched ,when submarine high-voltage cable was damaged by external force, with the function to provide the practical reference for running state of submarine high-voltage cable monitoring on-line based on distributed fiber optic sensor.

  16. Externality and burnout among dentists.

    Science.gov (United States)

    St-Yves, A; Freeston, M H; Godbout, F; Poulin, L; St-Amand, C; Verret, M

    1989-12-01

    This study investigates the relationship between burnout as measured by the Maslach Burnout Inventory and locus of control as measured by the Adult Nowicki-Strickland Internal-External Locus of Control (ANS-IE) for 82 dentists. Significant Pearson correlations between two Maslach subscales and locus of control show Personal Accomplishment to be negatively associated -.31 and Emotional Exhaustion to be positively correlated .21 to externality.

  17. Relatie interne en externe audit

    OpenAIRE

    Ghys, Emelie

    2011-01-01

    In het eerste hoofdstuk wordt de probleemstelling van deze eindverhandeling besproken. Interne en externe audit worden de laatste jaren internationaal en nationaal meer en meer erkend in het bedrijfsleven. Aanleiding voor de toenemende belangstelling van de interne en externe auditfunctie zijn de verschillende boekhoudschandalen rond corporate governance of deugdelijk bestuur. Deze financiële mislukkingen leidden wereldwijd tot diverse wetten, nieuwe regels en verbeterde standaarden om zo een...

  18. Performance Targets and External Benchmarking

    DEFF Research Database (Denmark)

    Friis, Ivar; Hansen, Allan; Vámosi, Tamás S.

    as a market mechanism that can be brought inside the firm to provide incentives for continuous improvement and the development of competitive advances. However, whereas extant research primarily has focused on the importance and effects of using external benchmarks, less attention has been directed towards...... towards the conditions for the use of the external benchmarks we provide more insights to some of the issues and challenges that are related to using this mechanism for performance management and advance competitiveness in organizations....

  19. Parallel External Memory Graph Algorithms

    DEFF Research Database (Denmark)

    Arge, Lars Allan; Goodrich, Michael T.; Sitchinava, Nodari

    2010-01-01

    In this paper, we study parallel I/O efficient graph algorithms in the Parallel External Memory (PEM) model, one o f the private-cache chip multiprocessor (CMP) models. We study the fundamental problem of list ranking which leads to efficient solutions to problems on trees, such as computing lowest...... an optimal speedup of ¿(P) in parallel I/O complexity and parallel computation time, compared to the single-processor external memory counterparts....

  20. What is the place of technical and scientific service companies (TSS ...

    African Journals Online (AJOL)

    What is the place of technical and scientific service companies (TSS) in the process of ... The new product development (NPD) process is composed by several ... can find external supporting services as design, prototyping, engineering, etc.

  1. CERN Technical Training: Signal Processor

    CERN Multimedia

    HR Department

    2009-01-01

    A new training is going to be held at CERN on the ADSP SHARC Family. The "System Development and Programming with the Analog Devices’ SHARC Family" course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your que...

  2. Changes in Energy Cost and Total External Work of Muscles in Elite Race Walkers Walking at Different Speeds

    Directory of Open Access Journals (Sweden)

    Chwała Wiesław

    2014-12-01

    Full Text Available The aim of the study was to assess energy cost and total external work (total energy depending on the speed of race walking. Another objective was to determine the contribution of external work to total energy cost of walking at technical, threshold and racing speed in elite competitive race walkers.

  3. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriy Y. Anistratov; Marvin L. Adams; Todd S. Palmer; Kord S. Smith; Kevin Clarno; Hikaru Hiruta; Razvan Nes

    2003-08-04

    OAK B202 Final Technical Report. The present generation of reactor analysis methods uses few-group nodal diffusion approximations to calculate full-core eigenvalues and power distributions. The cross sections, diffusion coefficients, and discontinuity factors (collectively called ''group constants'') in the nodal diffusion equations are parameterized as functions of many variables, ranging from the obvious (temperature, boron concentration, etc.) to the more obscure (spectral index, moderator temperature history, etc.). These group constants, and their variations as functions of the many variables, are calculated by assembly-level transport codes. The current methodology has two main weaknesses that this project addressed. The first weakness is the diffusion approximation in the full-core calculation; this can be significantly inaccurate at interfaces between different assemblies. This project used the nodal diffusion framework to implement nodal quasidiffusion equations, which can capture transport effects to an arbitrary degree of accuracy. The second weakness is in the parameterization of the group constants; current models do not always perform well, especially at interfaces between unlike assemblies. The project developed a theoretical foundation for parameterization and homogenization models and used that theory to devise improved models. The new models were extended to tabulate information that the nodal quasidiffusion equations can use to capture transport effects in full-core calculations.

  4. External Costs Related to Power Production Technologies

    DEFF Research Database (Denmark)

    Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

    1997-01-01

    The European Commission has launched a major study project, ExternE, to develop a methodology to quantify externalities. A “National Implementation Phase”, was started under the Joule II programme with the purpose of implementing the ExternE methodology in all member states. The main objective...

  5. External Costs Related to Power Production Technologies

    DEFF Research Database (Denmark)

    Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

    1997-01-01

    The European Commission has launched a major study project, ExternE, to develop a methodology to quantify externalities. A “National Implementation Phase”, was started under the Joule II programme with the purpose of implementing the ExternE methodology in all member states. The main objective of...

  6. Electrical Distribution Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide contains the standard electrical distribution curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the electrical distribution field, and in job skills such as construction, maintenance, and repair of overhead and underground electrical…

  7. Groundwater and Distribution Workbook.

    Science.gov (United States)

    Ekman, John E.

    Presented is a student manual designed for the Wisconsin Vocational, Technical and Adult Education Groundwater and Distribution Training Course. This program introduces waterworks operators-in-training to basic skills and knowledge required for the operation of a groundwater distribution waterworks facility. Arranged according to the general order…

  8. Environmental external effects for wind power and coal

    Energy Technology Data Exchange (ETDEWEB)

    Schleisner, L.; Meyer, H.J.; Morthorst, P.E. [Risoe National Lab., Roskilde (Denmark). Systems Analysis Dept.

    1995-12-31

    This article summarises some of the results achieved in a project carried out in Denmark with the purpose to assess the environmental damages and the external costs in the production of energy. The project has especially handled renewable energy versus energy based on fossil fuels. The project has been a collaboration between the Technical University of Denmark and Riso National Laboratory. The research institutions have considered different energy production technologies in the project. The energy production technologies that have been considered by Risoe National Laboratory and will be reported and compared in this article are the following: (1) Wind power, (2) A coal-fired condensing plant. In the project the environmental damages are thus compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized. The following result applies in general to the applied technologies. Only the environmental externalities have been assessed in the project. Social and economical externalities, e.g. related to changes in employment or depletion of resources, are not included in the project. The cost concept is based on marginal damage cost, in principle taking as starting point the level of pollution that exists today. The methodology, which has been used in order to find and monetize the environmental externalities, consists of the different processes like Identification, quantification, Dose-response and Valuation

  9. Determination of aims military-technical policy of Ukraine

    Directory of Open Access Journals (Sweden)

    O. F. Salnikova

    2014-06-01

    Full Text Available In the article the aims of military-technical policy are considered. Determination of aims (tasks of military-technical policy, its maintenance, requirements to it and directions of its further development it must come true by the analysis of different factors of external and internal environment. Among such factors: geopolitical and military-political position of Ukraine and its military doctrine; realized and operating programs of development (reformation of the soldiery forming and them technical rigging; terms of future military operations and progress of their maintenance, forms, methods and characteristic signs of battle actions trend; substantive provisions of art of war; conceptions, theories and doctrines of battle application of the soldiery forming of the different states; resources dedicated by the state on development of military-technical sphere and others like that. The fundamental chart of sequence of forming of public military-technical policy is presented in the article.

  10. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    1998-01-01

    article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply.......article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply....

  11. Technical Communication in Japan

    Institute of Scientific and Technical Information of China (English)

    Hiraku Amemiya

    2010-01-01

    @@ 1.Characteristics of Japanese Technical Communication(TC) The visual orientation of information characterizes Japanese technical communication.Manuals that have won Japan Manual Awards in the past have employed various designs with graphical presentations that evoke the style of popular magazines.

  12. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  13. Summer Technical Students 2004

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    About 100 technical and doctoral students arrive each year, undergraduates and post-graduates who are preparing diploma or doctoral theses in applied science and technology. They spend up to two years at the Laboratory, as technical students as part of their formal training for a recognised degree or its equivalent.

  14. Technical Program, 1974,

    Science.gov (United States)

    proposed AGARD Technical Program and Budget for 1974. The report reflects the program that was unanimously approved by the AGARD National Delegates Board...required to support the proposed 1974 AGARD technical program is presented in Section 3. The separate publications summary shown in Section 4 identifies by

  15. Thermodynamic cost of external control

    Science.gov (United States)

    Barato, Andre C.; Seifert, Udo

    2017-07-01

    Artificial molecular machines are often driven by the periodic variation of an external parameter. This external control exerts work on the system of which a part can be extracted as output if the system runs against an applied load. Usually, the thermodynamic cost of the process that generates the external control is ignored. Here, we derive a refined second law for such small machines that include this cost, which is, for example, generated by free energy consumption of a chemical reaction that modifies the energy landscape for such a machine. In the limit of irreversible control, this refined second law becomes the standard one. Beyond this ideal limiting case, our analysis shows that due to a new entropic term unexpected regimes can occur: the control work can be smaller than the extracted work and the work required to generate the control can be smaller than this control work. Our general inequalities are illustrated by a paradigmatic three-state system.

  16. Leveraging External Sources of Innovation

    DEFF Research Database (Denmark)

    West, Joel; Bogers, Marcel

    2014-01-01

    This paper reviews research on open innovation that considers how and why firms commercialize external sources of innovations. It examines both the “outside-in” and “coupled” modes of open innovation. From an analysis of prior research on how firms leverage external sources of innovation...... cited work beyond those journals. A review of 291 open innovation-related publications from these sources shows that the majority of these articles indeed address elements of this inbound open innovation process model. Specifically, it finds that researchers have front-loaded their examination...... external innovations create value rather than how firms capture value from those innovations. Finally, the interaction phase considers both feedback for the linear process and reciprocal innovation processes such as cocreation, network collaboration, and community innovation. This review and synthesis...

  17. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic......) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  18. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  19. Technical Writing in the Netherlands.

    Science.gov (United States)

    de Vet, Dominique M. W.

    1996-01-01

    Discusses the technical writing profession in the Netherlands. Bases the discussion on two studies--one directed at technical freelancers and another directed at technical writers working within organizations. Gives a profile of technical writers in the Netherlands; an impression of the problems technical writers in organizations deal with;…

  20. Special Education Finance in California. Technical Appendices

    Science.gov (United States)

    Hill, Laura; Warren, Paul; Murphy, Patrick; Ugo, Iwunze; Pathak, Aditi

    2016-01-01

    This document presents the technical appendices that accompany the full report, "Special Education Finance in California." The appendices include: (1) Problems with AB 602 and Other State Funding Programs for Special Education; (2) Additional Figures for Analysis of Distribution of Students with Disabilities; (3) Using Supplemental and…

  1. Officer Overexecution: Analysis and Solutions (Technical Background)

    Science.gov (United States)

    2015-08-01

    Distribution unlimited Officer Overexecution: Analysis and Solutions (Technical Background ) Jared M. Huff and Ann D. Parcell...Deviation SME Subject Matter Expert SWO Surface Warfare Officer SWO(N) Surface Warfare Officer with the Nuclear Subspecialty TFMMS Total Force...affect retention behavior. Some subject matter experts ( SMEs ) have suggested that an excess of junior officers (JOs) on board surface ships may not

  2. Dynamic optimization for multi-agent systems with external disturbances

    Institute of Scientific and Technical Information of China (English)

    Xinghu WANG; Peng YI; Yiguang HONG

    2014-01-01

    This paper studies the dynamic optimization problem for multi-agent systems in the presence of external disturbances. Different from the existing distributed optimization results, we formulate an optimization problem of continuous-time multi-agent systems with time-varying disturbance generated by an exosystem. Based on internal model and Lyapunov-based method, a distributed design is proposed to achieve the optimization. Finally, an example is given to illustrate the proposed optimization design.

  3. Mercury in waters, soils, and sediments of the New Jersey Coastal Plain: A comparison of regional distribution and mobility with the mercury contamination at the William J. Hughes Technical Center, Atlantic County, New Jersey

    Science.gov (United States)

    Barringer, Julia L.; Szabo, Zoltan; Reilly, Pamela A.

    2012-01-01

    Mercury in soils, surface water, and groundwater at the William J. Hughes Technical Center , Atlantic County, New Jersey, has been found at levels that exceed established background concentrations in Coastal Plain waters, and, in some cases, New Jersey State standards for mercury in various media. As of 2012, it is not known whether this mercury is part of regional mercury contamination or whether it is related to former military activities. Regionally, groundwater supplying about 700 domestic wells in the New Jersey Coastal Plain is contaminated with mercury that appears to be derived from anthropogenic inputs, such as agricultural pesticide use and atmospheric deposition. High levels of mercury occasionally are found in Coastal Plain soils, but disturbance during residential development on former agricultural land is thought to have mobilized any mercury applied during farming, a hypothesis borne out by experiments leaching mercury from soils. In the unsewered residential areas with mercury-contaminated groundwater, septic-system effluent is believed to create reducing conditions in which mercury sorbed to subsoils is mobilized to groundwater. In comparing the levels of mercury found in soils, sediments, streamwater, and groundwater at the William J. Hughes Technical Center site with those found regionally, mercury concentrations in groundwater in the region are, in some cases, substantially higher than those found in groundwater at the William J. Hughes Technical Center site. Nevertheless, concentrations of mercury in streamwater at the site are, in some instances, higher than most found regionally. The mercury contents in soils and sediment at the William J. Hughes Technical Center site are substantially higher than those found to date (2012) in the region, indicating that a source other than regional sources may be present at the site.

  4. Do socio-technical systems cognise?

    DEFF Research Database (Denmark)

    Blomberg, Olle

    2009-01-01

    The view that an agent’s cognitive processes sometimes include proper parts found outside the skin and skull of the agent is gaining increasing acceptance in philosophy of mind. One main empirical touchstone for this so-called active externalism is Edwin Hutchins’ theory of distributed cognition ...

  5. Do socio-technical systems cognise?

    DEFF Research Database (Denmark)

    Blomberg, Olle

    2009-01-01

    The view that an agent’s cognitive processes sometimes include proper parts found outside the skin and skull of the agent is gaining increasing acceptance in philosophy of mind. One main empirical touchstone for this so-called active externalism is Edwin Hutchins’ theory of distributed cognition ...

  6. Dynamic State Space Partitioning for External Memory Model Checking

    DEFF Research Database (Denmark)

    Evangelista, Sami; Kristensen, Lars Michael

    2009-01-01

    We describe a dynamic partitioning scheme usable by model checking techniques that divide the state space into partitions, such as most external memory and distributed model checking algorithms. The goal of the scheme is to reduce the number of transitions that link states belonging to different...

  7. Influence of furnishing on indoor airflow near external walls

    DEFF Research Database (Denmark)

    Mortensen, Lone Hedegaard; Rode, Carsten; Peuhkuri, Ruut

    2008-01-01

    Simulations of indoor environments in buildings are usually performed assuming uniform distribution of temperature and humidity of the indoor air, such as it would be in an idealised unfurnished room. The flow patterns near external walls may however be very different from the undisturbed airflow...

  8. The theory of sternheimer shielding in molecules in external fields

    Science.gov (United States)

    Fowler, P. W.; Lazzeretti, P.; Steiner, E.; Zanasi, R.

    1989-05-01

    A series of tensors is defined to describe the response to external electric and magnetic fields of the electric field gradient at a nucleus in a molecule. Perturbation expressions, symmetry relations and exact results for the hydrogen atom are given. The new tensors are related to derivatives of electric field shieldings with respect to motion of a test point through an electron distribution.

  9. Optimal Auctions with Financial Externalities

    NARCIS (Netherlands)

    Maasland, E.; Onderstal, A.M.

    2002-01-01

    We construct optimal auctions when bidders face financial externalities.In a Coasean World, in which the seller cannot prevent a perfect resale market, nor withhold the object, the lowest-price all-pay auction is optimal.In a Myersonean World, in which the seller can both prevent resale after the au

  10. Organizing for External Knowledge Sourcing

    DEFF Research Database (Denmark)

    Rabbiosi, Larissa; Reichstein, Toke

    2011-01-01

    The aim of this article is to provide an introduction to the special issue. We briefly consider the external knowledge sourcing and organizing for innovation literatures, which offer a background for the special issue, and we highlight their mutual dialogue. We then illustrate the main findings...

  11. Measuring Externalities in Program Evaluation

    NARCIS (Netherlands)

    Janssens, Wendy

    2005-01-01

    Impact evaluations of development programmes usually focus on a comparison of participants with a control group. However, if the programme generates externalities for non-participants such an approach will capture only part of the programme's impact. Based on a unique large-scale quantitative survey

  12. Lupus vulgaris of external nose.

    Science.gov (United States)

    Bhandary, Satheesh Kumar; Ranganna, B Usha

    2008-12-01

    Lupus vulgaris is the commonest form of cutaneous tuberculosis which commonly involve trunk and buttocks. Lupus vulgaris affecting nose and face, are rarely reported in India. This study reports an unusual case of lupus vulgaris involving the external nose that showed dramatic outcome after six months of anti- tubercular treatment.

  13. [Treatment by external insulin pump].

    Science.gov (United States)

    Clavel, Sylvaine

    2010-12-01

    Since the recent recommendations by the French speaking association for research on diabetes and metabolic illnesses (Alfediam), treatment by insulin pump has found itself in competition with basal-bolus, a procedure using similar injections of insulin which has become a benchmark treatment. The latest Alfediam guidelines focus on defining ways of treating diabetics with an external insulin pump.

  14. Matchings with Externalities and Attitudes

    DEFF Research Database (Denmark)

    Branzei, Simina; Michalak, Tomasz; Rahwan, Talal;

    2013-01-01

    Two-sided matchings are an important theoretical tool used to model markets and social interactions. In many real-life problems the utility of an agent is influenced not only by their own choices, but also by the choices that other agents make. Such an influence is called an externality. Whereas ...

  15. Post-external dacryocystorhinostomy lagophthalmos.

    Science.gov (United States)

    Odat, Thabit A; Odat, Haitham A; Khraisat, Heba; Odat, Mohannad A; Alzoubi, Firas Q

    2015-06-01

    To describe lagophthalmos and eyelid closure abnormality after external dacryocystorhinostomy (DCR). A retrospective review of medical records and postoperative photographs of 79 patients who underwent external DCR for nasolacrimal duct obstruction and developed eyelid closure abnormality and lagophthalmos with or without exposure keratopathy was conducted. Collected data included age, sex, indication for surgery, laterality, length and type of incision, length of follow-up duration, presence of punctate epithelial keratopathy, and time for resolution of eyelid closure abnormalities. Twenty-seven patients with 28 external dacryocystorhinostomy had postoperative eyelid closure abnormalities. Male to female ratio was 1:6. The mean age was 40.1 years (range 9-80 years). All surgeries were performed through diagonal skin incision. Lagophthalmos involving the medial third of the palpebral fissure was noticed in 28.6 % of cases. All patients had hypometric blink mainly of the upper eyelid. One patient had punctate epithelial keratopathy. Resolution of lagophthalmos was noticed over a period of 1-5 weeks with an average of 3 weeks. None of the patients continued to have residual hypometric blink or punctate keratopathy at the last follow-up time. The mean follow-up period was 4.2 months (range 3-6 months). Eyelid closure abnormality and lagophthalmos after external DCR are underestimated problems. Spontaneous resolution is seen in all cases weeks to months after surgery.

  16. Femoral Reconstruction Using External Fixation

    Directory of Open Access Journals (Sweden)

    Yevgeniy Palatnik

    2011-01-01

    Full Text Available Background. The use of an external fixator for the purpose of distraction osteogenesis has been applied to a wide range of orthopedic problems caused by such diverse etiologies as congenital disease, metabolic conditions, infections, traumatic injuries, and congenital short stature. The purpose of this study was to analyze our experience of utilizing this method in patients undergoing a variety of orthopedic procedures of the femur. Methods. We retrospectively reviewed our experience of using external fixation for femoral reconstruction. Three subgroups were defined based on the primary reconstruction goal lengthening, deformity correction, and repair of nonunion/bone defect. Factors such as leg length discrepancy (LLD, limb alignment, and external fixation time and complications were evaluated for the entire group and the 3 subgroups. Results. There was substantial improvement in the overall LLD, femoral length discrepancy, and limb alignment as measured by mechanical axis deviation (MAD and lateral distal femoral angle (LDFA for the entire group as well as the subgroups. Conclusions. The Ilizarov external fixator allows for decreased surgical exposure and preservation of blood supply to bone, avoidance of bone grafting and internal fixation, and simultaneous lengthening and deformity correction, making it a very useful technique for femoral reconstruction.

  17. The NASA Technical Report Server

    Science.gov (United States)

    Nelson, Michael L.; Gottlich, Gretchen L.; Bianco, David J.; Paulson, Sharon S.; Binkley, Robert L.; Kellogg, Yvonne D.; Beaumont, Chris J.; Schmunk, Robert B.; Kurtz, Michael J.; Accomazzi, Alberto

    1995-01-01

    The National Aeronautics and Space Act of 1958 established NASA and charged it to "provide for the widest practicable and appropriate dissemination of information concerning its activities and the results thereof." The search for innovative methods to distribute NASA's information lead a grass-roots team to create the NASA Technical Report Server (NTRS), which uses the World Wide Web and other popular Internet-based information systems as search engines. The NTRS is an inter-center effort which provides uniform access to various distributed publication servers residing on the Internet. Users have immediate desktop access to technical publications from NASA centers and institutes. The NTRS is comprised of several units, some constructed especially for inclusion in NTRS, and others that are existing NASA publication services that NTRS reuses. This paper presents the NTRS architecture, usage metrics, and the lessons learned while implementing and maintaining the service. The NTRS is largely constructed with freely available software running on existing hardware. NTRS builds upon existing hardware and software, and the resulting additional exposure for the body of literature contained ensures that NASA's institutional knowledge base will continue to receive the widest practicable and appropriate dissemination.

  18. Wide distribution of external local sign in the normal population

    NARCIS (Netherlands)

    Koenderink, J.J.; van Doorn, A.J.; Todd, J.T.

    2009-01-01

    The extent of the apparent visual Weld was determined for a group of 78 naïve visual observers. We Wnd that there exists a minority (less than 10%) that is essentially veridical, but that the majority of the population experiences an apparent visual Weld of only about 90°, thus much narrower than th

  19. Milestones for National Technical

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The first session of National Technical Committee of Auto Standardization was established onApri128,1988. The first session of National Technical Committee of Auto Standardization (SAC/TC 114)was established in Beijing on April 28,1988,under the approval of the National Bureau of Standards at that time,with the official from China Association of Automobile Manufacturers as its director.It played a very impoorant role,not only in the unified management of auto standards but also in the technical work of the management of auto products.

  20. Defensive externality and blame projection following failure.

    Science.gov (United States)

    Hochreich, D J

    1975-09-01

    This study focuses upon the relationship between internal-external control and defensive blame projection. Trust was used as a moderator variable for making differential predictions concerning the behavior of two subgroups of externals: defensive externals, whose externality is presumed to reflect primarily a verbal technique of defense, and congruent externals, whose externality reflects a more genuine belief that most outcomes are determined by forces beyond their personal control. As predicted, defensive externals showed a stronger tendency than did congruent externals and internals to resort to blame projection following failure at an achievement task. There were no group differences in attribution following task success. Defensive externals were found to be more responsive to negative feedback than were congruent externals.

  1. NCDC Technical Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCDC Technical Reports is a set of retrospective analyses produced by the Research Customer Service Group and the National Climatic Data Center from 1995 to 2008....

  2. Technical report writing today

    CERN Document Server

    Riordan, Daniel G

    2014-01-01

    "Technical Report Writing Today" provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples - more than 100 in all - illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resum...

  3. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...... in which the human participants orient towards the artefact in different ways; thereby, the construction of technical agency can shift from moment to moment....

  4. Superfund Technical Assistance Grants

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes data related to the Superfund Technical Assistance Grant program, including grant number, award amounts, award dates, period of performance,...

  5. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  6. TURBULENCE,VORTEX AND EXTERNAL EXPLOSION INDUCED BY VENTING

    Institute of Scientific and Technical Information of China (English)

    姜孝海; 范宝春; 叶经方

    2004-01-01

    The process of explosion venting to air in a cylindrical vent vessel connected to a duct, filling with a stoichiometric methane-oxygen gas mixture, was simulated numerically by using a colocated grid SIMPLE scheme based on k-epsilon turbulent model and Eddydissipation combustion model. The characteristics of the combustible cloud, flame and pressure distribution in the external flow field during venting were analyzed in terms of the predicted results. The results show that the external explosion is generated due to violent turbulent combustion in the high pressure region within the external combustible cloud ignited by a jet flame. And the turbulence and vortex in the external flow field were also discussed in detail. After the jet flame penetrating into the external combustible cloud, the turbulent intensity is greater in the regions with greater average kinetic energy gradient, rather than in the flame front; and the vortex in the external flow field is generated primarily due to the baroclinic effect, which is greater in the regions where the pressure and density gradients are nearly perpendicular.

  7. Applicability of a desiccant dew-point cooling system independent of external water sources

    DEFF Research Database (Denmark)

    Bellemo, Lorenzo; Elmegaard, Brian; Kærn, Martin Ryhl

    2015-01-01

    The applicability of a technical solution for making desiccant cooling systems independent of external water sources is investigated. Water is produced by condensing the desorbed water vapour in a closed regeneration circuit. Desorbed water recovery is applied to a desiccant dew-point cooling...

  8. Technical Report Writing Today

    DEFF Research Database (Denmark)

    Riordan, Daniel G.

    2014-01-01

    Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...... websites/using social media, formal reports, recommendation and feasibility reports, proposals, user manuals). Section 3: Professional Communication (2 chapters and 2 appendices on presentations, job application materials, brief handbook for tech writers, documenting sources)....

  9. Technical Report Writing Today

    DEFF Research Database (Denmark)

    Riordan, Daniel G.

    2014-01-01

    Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...... websites/using social media, formal reports, recommendation and feasibility reports, proposals, user manuals). Section 3: Professional Communication (2 chapters and 2 appendices on presentations, job application materials, brief handbook for tech writers, documenting sources)....

  10. Identifying external influences on global precipitation

    Energy Technology Data Exchange (ETDEWEB)

    Marvel, K.; Bonfils, C.

    2013-11-11

    Changes in global (ocean and land) precipitation are among the most important and least well-understood consequences of climate change. Increasing greenhouse gas concentrations are thought to affect the zonal-mean distribution of precipitation through two basic mechanisms. First, increasing temperatures will lead to an intensification of the hydrological cycle (“thermodynamic” changes). Second, changes in atmospheric circulation patterns will lead to poleward displacement of the storm tracks and subtropical dry zones and to a widening of the tropical belt (“dynamic” changes). We demonstrate that both these changes are occurring simultaneously in global precipitation, that this behavior cannot be explained by internal variability alone, and that external influences are responsible for the observed precipitation changes. Whereas existing model experiments are not of sufficient length to differentiate between natural and anthropogenic forcing terms at the 95% confidence level, we present evidence that the observed trends result from human activities.

  11. Dipolar fluids under external perturbations

    Energy Technology Data Exchange (ETDEWEB)

    Klapp, Sabine H L [Stranski-Laboratorium fuer Physikalische und Theoretische Chemie Sekretariat TC7, Technische Universitaet Berlin, Strasse des 17. Juni 124, D-10623 Berlin (Germany)

    2005-04-20

    We discuss recent developments and present new findings on the structural and phase properties of dipolar model fluids influenced by various external perturbations. We concentrate on systems of spherical particles with permanent (point) dipole moments. Starting from what is known about the three-dimensional systems, particular emphasis is given to dipolar fluids in different confining situations involving both simple and complex (disordered) pore geometries. Further topics concern the effect of quenched positional disorder, the influence of external (electric or magnetic) fields, and the fluid-fluid phase behaviour of various dipolar mixtures. It is demonstrated that due to the translational-orientational coupling and due to the long range of dipolar interactions even simple perturbations such as hard walls can have a profound impact on the systems. (topical review)

  12. External observer reflections on QBism

    CERN Document Server

    Khrennikov, Andrei

    2015-01-01

    In this short review I present my personal reflections on QBism. I have no intrinsic sympathy neither to QBism nor to subjective interpretation of probability in general. However, I have been following development of QBism from its very beginning, observing its evolution and success, sometimes with big surprise. Therefore my reflections on QBism can be treated as "external observer" reflections. I hope that my representation of this interpretation of quantum mechanics (QM) has some degree of objectivity. It may be useful for researchers who are interested in quantum foundations, but do not belong to the QBism-community, because I tried to analyze essentials of QBism critically (i.e., not just emphasizing its advantages, as in a typical publication of QBists). QBists may be interested as well - in comments of an external observer who monitored development of this approach to QM during last 16 years. The second part of the paper is devoted to interpretations of probability, objective versus subjective, and view...

  13. Firm Search for External Knowledge

    DEFF Research Database (Denmark)

    Sofka, Wolfgang; Grimpe, Christoph

    2012-01-01

    The innovation performance of modern firms is increasingly determined by their ability to search and absorb external knowledge. However, after a certain threshold firms "oversearch" their environment and innovation performance declines. In this paper, we argue that prior literature has largely...... ignored the institutional context that provides or denies access to external knowledge at the country level. Combining institutional and knowledge search theory, we suggest that the market orientation of the institutional environment and the magnitude of institutional change influence when firms begin...... to experience the negative performance effects of oversearch. Based on a comprehensive sample of almost 8,000 firms from ten European countries, we find that institutions matter considerably for firms' search activity. Higher market orientation of institutions increases the effectiveness of firms' search...

  14. MGR External Events Hazards Analysis

    Energy Technology Data Exchange (ETDEWEB)

    L. Booth

    1999-11-06

    The purpose and objective of this analysis is to apply an external events Hazards Analysis (HA) to the License Application Design Selection Enhanced Design Alternative 11 [(LADS EDA II design (Reference 8.32))]. The output of the HA is called a Hazards List (HL). This analysis supersedes the external hazards portion of Rev. 00 of the PHA (Reference 8.1). The PHA for internal events will also be updated to the LADS EDA II design but under a separate analysis. Like the PHA methodology, the HA methodology provides a systematic method to identify potential hazards during the 100-year Monitored Geologic Repository (MGR) operating period updated to reflect the EDA II design. The resulting events on the HL are candidates that may have potential radiological consequences as determined during Design Basis Events (DBEs) analyses. Therefore, the HL that results from this analysis will undergo further screening and analysis based on the criteria that apply during the performance of DBE analyses.

  15. 78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2013-05-13

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013... to the webcast. The Capitol Connection provides technical support for webcasts and offers the...

  16. Network externalities across financial institutions

    OpenAIRE

    Castro Iragorri, Carlos Alberto; Preciado Pua, Sergio Andrés; Ordóñez Herrera, Juan Sebastián

    2016-01-01

    We propose and estimate a financial distress model that explicitly accounts for the interactions or spill-over effects between financial institutions, through the use of a spatial continuity matrix that is build from financial network data of inter bank transactions. Such setup of the financial distress model allows for the empirical validation of the importance of network externalities in determining financial distress, in addition to institution specific and macroeconomic covariates. The re...

  17. Externe Kosten in der Energiewirtschaft

    OpenAIRE

    Voß, Alfred; Friedrich, Rainer

    1994-01-01

    Als externe Effekte werden unbeteiligte Dritte betreffende Zusatzkosten oder Zusatznutzen verstanden, die sich in den jeweiligen Güterpreisen nicht wiederfinden und denen die Betroffenen nicht indifferent gegenüberstehen. Die gegenwärtige Energiebereitstellung und -nutzung ist in vielen Bereichen eine wesentliche Quelle der Belastung von Umwelt und Natur. Begriffe und Schlagworte wie Waldsterben, Tankerunglücke, Tschernobyl und Treibhauseffekt seien in diesem Zusammenhang erwähnt.

  18. Matching Games with Additive Externalities

    DEFF Research Database (Denmark)

    Branzei, Simina; Michalak, Tomasz; Rahwan, Talal

    2012-01-01

    Two-sided matchings are an important theoretical tool used to model markets and social interactions. In many real life problems the utility of an agent is influenced not only by their own choices, but also by the choices that other agents make. Such an influence is called an externality. Whereas......, optimistic, and pessimistic behaviour, and provide both computational hardness results and polynomial-time algorithms for computing stable outcomes....

  19. CT findings of the osteoma of the external auditory canal

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ha Young; Song, Chang Joon; Yoon, Chung Dae; Park, Mi Hyun; Shin, Byung Seok [Chungnam National University, School of Medicine, Daejeon (Korea, Republic of)

    2006-07-15

    We wanted to report the CT image findings of the osteoma of the external auditory canal. Temporal bone CT scanning was performed on eight patients (4 males and 4 females aged between 8 and 41 years) with pathologically proven osteoma of the external auditory canal after operation, and the findings of the CT scanning were retrospectively reviewed. Not only did we analyze the size, shape, distribution and location of the osteomas, we also analyzed the relationship between the lesion and the tympanosqumaous or tympanomastoid suture line, and the changes seen on the CT scan images for the patients who were able to undergo follow-up. All the lesions of the osteoma of the external auditory canal were unilateral, solitary, pedunculated bony masses. In five patients, the osteomas occurred on the left side and for the other three patients, the osteomas occurred on the right side. The average size of the osteoma was 0.6 cm with the smallest being 0.5 cm and the largest being 1.2 cm. Each of the lesions was located at the osteochondral junction in the terminal part of the osseous external ear canal. The stalk of the osteoma of the external auditory canal was found to have occurred in the anteroinferior wall in five cases (63%), in the anterosuperior wall (the tympanosqumaous suture line) in two cases (25%), and in the anterior wall in one case. The osteoma of the external auditory canal was a compact form in five cases and it was a cancellous form in three cases. One case of the cancellous form was changed into a compact form 35 months later due to the advanced ossification. Osteoma of the external auditory canal developed in a unilateral and solitary fashion. The characteristic image findings show that it is attached to the external auditory canal by its stalk. Unlike our common knowledge about its occurrence, osteoma mostly occurred in the tympanic wall, and this is regardless of the tympanosquamous or tympanomastoid suture line.

  20. Variable velocity in solar external receivers

    Science.gov (United States)

    Rodríguez-Sánchez, M. R.; Sánchez-González, A.; Acosta-Iborra, A.; Santana, D.

    2017-06-01

    One of the major problems in solar external receivers is tube overheating, which accelerates the risk of receiver failure. It can be solved implementing receivers with high number of panels. However, it exponentially increases the pressure drop in the receiver and the parasitic power consumption of the Solar Power Tower (SPT), reducing the global efficiency of the SPT. A new concept of solar external receiver, named variable velocity receiver, is able to adapt their configuration to the different flux density distributions. A set of valves allows splitting in several independent panels those panels in which the wall temperature is over the limit. It increases the velocity of the heat transfer fluid (HTF) and its cooling capacity. This receiver does not only reduce the wall temperature of the tubes, but also simplifies the control of the heliostat field and allows to employ more efficient aiming strategies. In this study, it has been shown that variable velocity receiver presents high advantages with respect to traditional receiver. Nevertheless, more than two divisions per panels are not recommendable, due to the increment of the pressure drop over 70 bars. In the design point (12 h of the Spring Equinox), the use of a variable number of panels between 18 and 36 (two divisions per panel), in a SPT similar to Gemasolar, improves the power capacity of the SPT in 5.7%, with a pressure drop increment of 10 bars. Off-design, when the flux distribution is high and not symmetric (e.g. 10-11 h), the power generated by the variable velocity receiver is 18% higher than the generated by the traditional receiver, at these hours the pressure drop increases almost 20 bars.

  1. ENDOSCOPIC DCR VERSUS EXTERNAL DCR

    Directory of Open Access Journals (Sweden)

    Rukma

    2015-04-01

    Full Text Available PURPOSE: To compare success rates of endoscopic dacryocystorhinostomy (DCR and external DCR for acquired nasolacrimal duct obstruction (NLDO. MATERIALS AND METHODS: A prospective comparative non randomized study of 64 patients who presented with acquired NLD obstruction to a tertiary hospital. They were fully evaluated to ascertain the site of obstruction and patients with distal obstruction were included in the study. 34 patients underwent endoscopic DCR and 30 patients underwent external DCR RESULTS: 64 patients were included in the study and 72 procedures carried out. Success was achieved in 65 cases and failure in 7. Of the 7 failed cases, anatomical obstruction at the fistula site was found in 3, whereas functional failure was found in 4. In our patients, endoscopic DCR had a significantly higher success rate than external DCR, 95.23% versus 83.33% (P = 0.03. CONCLUSIONS: The success rate of Endoscopic DCR for acquired NLDO in our group of patients was 95.23%, with endoscopic surgery showing better results.

  2. Conceptual challenges for internalising externalities

    DEFF Research Database (Denmark)

    Miguel, Brandão; Weidema, Bo Pedersen

    2013-01-01

    We analyse a number of different externalities to identify conceptual challenges for the practical implementation of their internalisation. Three issues were identified: i) The balance between compensation and technology change and the respective effects on the nominal and real GDP; ii) The relev......We analyse a number of different externalities to identify conceptual challenges for the practical implementation of their internalisation. Three issues were identified: i) The balance between compensation and technology change and the respective effects on the nominal and real GDP; ii......) The relevance and efficiency of different instruments for internalisation and compensation; and iii) Implementing internalisation over large geographical and temporal distances. We find taxation to be a more relevant and efficient tool for internalisation than insurance and litigation. With increasing...... geographical and especially temporal distance between the benefitting actor and the victim of the external cost, the involvement of a non-governmental intermediate actor becomes increasingly necessary to provide the short-term capital required to ensure a successful implementation....

  3. Individuals' insight into intrapersonal externalities

    Directory of Open Access Journals (Sweden)

    David J. Stillwell

    2012-07-01

    Full Text Available An intrapersonal externality exists when an individual's decisions affect the outcomes of her future decisions. It can result in decreasing or increasing average returns to the rate of consumption, as occurs in addiction or exercise. Experimentation using the Harvard Game, which models intrapersonal externalities, has found differences in decision making between drug users and control subjects, leading to the argument that these externalities influence the course of illicit drug use. Nevertheless, it is unclear how participants who behave optimally conceptualise the problem. We report two experiments using a simplified Harvard Game, which tested the differences in contingency knowledge between participants who chose optimally and participants who did not. Those who demonstrated optimal performance exhibited both a pattern of correct responses and systematic errors to questions about the payoff schedules. The pattern suggested that they learned explicit knowledge of the change in reinforcement on a trail-by-trial basis. They did not have, or need, a full knowledge of the historical interaction leading to each payoff. We also found no evidence of choice differences between participants who were given a guaranteed payment and participants who were paid contingent on their performance, but those given a guaranteed payment were able to report more contingency knowledge as the experiment progressed, suggesting that they explored more rather than settling into a routine. Experiment 2 showed that using a fixed inter-trial interval did not change the results.

  4. Internal and external influence in the US stock market

    Science.gov (United States)

    Borysov, Stanislav; Roudi, Yasser; Balatsky, Alexander

    2014-03-01

    We analyze the multivariate distribution of the US stock returns using pairwise interaction models, inspired by Ising models in glasses and neural networks. Using the inference methods from neural networks analysis we find unique descriptors of the dynamics of stock returns in periods of crisis. Our findings suggest that the near crash dynamics is primarily governed by external factors (external fields), while internal network structure (J couplings) are not significantly affected. This work is supported by Nordita and VR VCB 621-2012-2983.

  5. Distributed Energy Generation for Climate Resilience

    Energy Technology Data Exchange (ETDEWEB)

    Stout, Sherry; Hotchkiss, Eliza

    2017-05-24

    Distributed generation can play a critical role in supporting climate adaptation goals. This infographic style poster will showcase the role of distributed generation in achieving a wide range of technical and policy goals and social services associated with climate adaptation.

  6. 武汉市外环境中禽流行性感冒病毒分布及禽类职业暴露人群H5N1抗体水平调查%Investigation on the distribution of avian influenza virus in external environment and the level of H5N1 antibody in poultry-exposed population in Wuhan

    Institute of Scientific and Technical Information of China (English)

    王英; 孔雯骅; 朱洪浩; 罗同勇; 林新明; 余滨; 陈邦华; 胡权; 彭劲松

    2011-01-01

    found.The difference had statistical significance ( x2 =41.433,P < 0.05 ).Among the 249 serum samples collected from poultry-exposed population,5 samples were H5N1 antibody positive against A/Hubei/1/10 antigen ( inhibition titer ≥ 160),which came from 4 different live poultry markets,however,no positive serum sample against A/Anhui/1/05 antigen was found.Conclusion Multiple subtypes of avian influenza virus simultaneously prevailed in Wuhan urban poultry markets.Moreover,results from the distribution of avian influenza virus in external environment were consistent with the level of H5N1 antibody in poultry-exposed population.

  7. 47 CFR 15.204 - External radio frequency power amplifiers and antenna modifications.

    Science.gov (United States)

    2010-10-01

    ... person shall use, manufacture, sell or lease, offer for sale or lease (including advertising for sale or lease), or import, ship, or distribute for the purpose of selling or leasing, any external radio... separate product. (1) An external radio frequency power amplifier may be marketed for individual...

  8. TCR as supervisor of technical systems

    CERN Document Server

    Laeger, H

    1998-01-01

    Our Technical Control Room (TCR) provides continuous supervision of CERN's technical infrastructure. It also serves the inhabitants of CERN's premises as a contact point in case of problems. Every year we initiate eleven thousand recorded corrective interventions; about half subsequent to user phone calls, the other half to automatic alarms. TCR tasks are essentially fourfold: collect and distribute information on abnormal operation states; supervise those technical systems for which we have a mandate; initiate corrective interventions; and perform corrective on-site interventions outside normal working hours. A TCR operator normally has an education corresponding to a French BTS and initially little professional experience. He holds short-term contracts, up to a maximum of six years. This paper outlines TCR tasks and presents some statistical data. It also indicates relations between users, equipment groups, contract firms and the TCR as go-between. Finally, it gives an account of our seven years experience ...

  9. Technical progress in pipeline design and construction

    Energy Technology Data Exchange (ETDEWEB)

    Hausken, K.B.

    1995-12-31

    This paper considers the technical progress in offshore pipeline construction with limitation to some general subjects covering pipeline design, installation and start-up. In future the use of limit state pipeline design philosophy, may be implemented as an alternative to the stress based design commonly used to day giving a potential for further optimisation of the pipeline design and consequently reduction of the initial investment. Comprehensive research and development efforts in Norway in the second half of the 1970`s, made it technically feasible to cross the deep water Norwegian Trench in the 1980`s. In addition, the development of several offshore pipeline systems until to day including gas distribution systems to the European continent, have brought Norway to the forefront of technical expertise

  10. Unintegrated double parton distributions

    CERN Document Server

    Golec-Biernat, K

    2016-01-01

    We present the construction of unintegrated double parton distribution functions which include dependence on transverse momenta of partons. We extend the formulation which was used to obtain the single unintegrated parton distributions from the standard, integrated parton distribution functions. Starting from the homogeneous part of the evolution equations for the integrated double parton distributions, we construct the unintegrated double parton distributions as the convolutions of the integrated double distributions and the splitting functions, multiplied by the Sudakov form factors. We show that there exist three domains of external hard scales which require three distinct forms of the unintegrated double distributions. The additional transverse momentum dependence which arises through the Sudakov form factors leads to non-trivial correlations in the parton momenta. We also discuss the non-homogeneous contribution to the unintegrated double parton distributions, which arises due to the splitting of a singl...

  11. Technical Assistance to Developers

    Energy Technology Data Exchange (ETDEWEB)

    Rockward, Tommy [Los Alamos National Laboratory; Borup, Rodney L. [Los Alamos National Laboratory; Garzon, Fernando H. [Los Alamos National Laboratory; Mukundan, Rangachary [Los Alamos National Laboratory; Spernjak, Dusan [Los Alamos National Laboratory

    2012-07-17

    This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

  12. The Interstellar Medium in External Galaxies: Summaries of contributed papers

    Science.gov (United States)

    Hollenbach, David J. (Editor); Thronson, Harley A., Jr. (Editor)

    1990-01-01

    The Second Wyoming Conference entitled, The Interstellar Medium in External Galaxies, was held on July 3 to 7, 1989, to discuss the current understanding of the interstellar medium in external galaxies and to analyze the basic physical processes underlying interstellar phenomena. The papers covered a broad range of research on the gas and dust in external galaxies and focused on such topics as the distribution and morphology of the atomic, molecular, and dust components; the dynamics of the gas and the role of the magnetic field in the dynamics; elemental abundances and gas depletions in the atomic and ionized components; cooling flows; star formation; the correlation of the nonthermal radio continuum with the cool component of the interstellar medium; the origin and effect of hot galactic halos; the absorption line systems seen in distant quasars; and the effect of galactic collisions.

  13. Productivity Measurement Of Technical Institute

    Directory of Open Access Journals (Sweden)

    Miss.Pooja Yadav

    2015-05-01

    Full Text Available Abstract The increasing concern over globalization between other things has made the achievement of lifetime skills vital for all classes of people. Achievement of such skills can be developed from technical education programs in the advance of any nation. Skill gaining provides knowledge and inculcates the approaches that are essential for arrival and progress into an occupation. When skills are developed in any occupation it will provide and improve the standard of living with the cover beside poverty thereby behind national development. This paper observes sampling distribution and moving average concept that how technical education can generate the required skills the significance of skill acquisition its roles benefits and sustainability in national development. It also mentions among others that government should look into and improve productivity that can encourage skill achievement for the youths. The solutions are divided the sampling box into few group before stacking up workstation and use table and some other wood product. Cost reduction for each solution was intended and the solution with highest cost decrease is chosen to increase the productivity of the college.

  14. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  15. Technical training - places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department »Electronics design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 3 places available Foundations of Electromagnetism and Magnet Design (EMAG) 14-Nov-12 to 27-Nov-12 6 days English 20 places available Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 15 places available Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 7 places available LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places available »Mechanical design Next Se...

  16. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Introduction to VHDL 21-Feb-13 to 22-Feb-13 2 days English Mechanical design Next Session Duration Language ANSYS - Introduction à ANSYS Mechanical APDL 04-Feb-13 to 07-Feb-13 4 days English Applications de la cotation fonctionnelle et du langage ISO 06-Feb-13 to 08-Feb-13 2 days 4 hours French CATIA V5 – Surfacique 14-Jan-13 to 15-Jan-13 2 days French Office software Next Session Duration Language ACCESS 2010 - niveau 2 : ECDL 06-Feb-13 to 07-Feb-13 2 days French Dreamweaver CS3 - Niveau 1 14-Jan-13 to 15-Jan-13 2 d...

  17. Windows 10 Technical Preview

    OpenAIRE

    Jyväsjärvi, Teppo

    2015-01-01

    Tässä opinnäytetyössä tutustaan uuden kesällä 2015 virallisesti julkaistavan Windows 10 -käyttöjärjestelmän Technical Preview -kehitysversioon. Ensimmäinen Technical Preview -versio julkaistiin syksyllä 2014. Opinnäytetyössä tutustaan Windows 10:n uusin ominaisuuksiin ja tehdään vertailua aiemman Windows 8.1 -version kanssa. Työssä Windows 10 Technical Preview asennetaan virtuaalikoneelle, käydään läpi asennuksen eri vaiheet sekä suurimmat muutokset käyttöliittymässä ja sovelluksissa. Op...

  18. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

  19. Skepticism, Contextualism, Externalism and Modality

    Directory of Open Access Journals (Sweden)

    Ron Wilburn

    2006-12-01

    Full Text Available In this paper, I argue for the following claims. Contextualist strategies to tame or localize epistemic skepticism are hopeless if contextualist factors are construed internalistically. However, because efforts to contextualize externalism via subjunctive conditional analysis court circularity, it is only on an internalistic interpretation that contextualist strategies can even be motivated. While these claims do not give us an argument for skepticism, they do give us an argument that contextualism, as such, is not likely to provide us with an argument against skepticism.

  20. Leveraging External Sources of Innovation

    DEFF Research Database (Denmark)

    West, Joel; Bogers, Marcel

    2014-01-01

    own specific set of mechanisms and conditions. Integrating innovations has been mostly studied from an absorptive capacity perspective, with less attention given to the impact of competencies and culture (including “not invented here”). Commercializing innovations puts the most emphasis on how......” in a way inconsistent with earlier definitions in innovation management. The paper concludes with recommendations for future research that include examining the end-to-end innovation commercialization process, and studying the moderators and limits of leveraging external sources of innovation....

  1. Use of a panel method in the prediction of external store separation

    CSIR Research Space (South Africa)

    Van Den Broek, GJ

    1984-05-01

    Full Text Available A computer program, developed to predict the separation characteristics of external stores after release from the carrier aircraft, is discussed The aircraft is represented by panel singularity distributions along the line of Woodward's USSAERO code...

  2. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    The scope of the project is to investigate the possibillities of - and the barriers for a transformation of technical infrastructure conserning energy, water and waste. It focus on urban ecology as a transformation strategy. The theoretical background of the project is theories about infrastructure......, the evolution of large technological systems and theories about organisational and technological transformationprocesses. The empirical work consist of three analysis at three different levels: socio-technical descriptions of each sector, an envestigation of one municipality and envestigations of one workshop...

  3. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  4. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  5. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  6. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2009-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual session of this course will take place on 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  7. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced using Windows XP. The next bilingual sessions of this course will take place on December 12, 2008 and January 30, 2009. Register using our catalogue : http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  8. Islanded operation of distributed networks

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This report summarises the findings of a study to investigate the regulatory, commercial and technical risks and benefits associated with the operation of distributed generation to power an islanded section of distributed network. A review of published literature was carried out, and UK generators were identified who could operate as part of an island network under the existing technical, regulatory, and safety framework. Agreement on case studies for consideration with distributed network operators (DNOs) is discussed as well as the quantification of the risks, benefits and costs of islanding, and the production of a case implementation plan for each case study. Technical issues associated with operating sections of network in islanded mode are described, and impacts of islanding on trading and settlement, and technical and commercial modelling are explored.

  9. Empirical Evaluation On External Debt Of Malaysia

    OpenAIRE

    Nor’Aznin Abu Bakar; Sallahuddin Hassan

    2011-01-01

    This study analyzes the effects of external debts on economic growth in Malaysia. The analysis is conducted both at aggregate and disaggregate levels. The empirical results are based on VAR estimates using GDP, external debts, capital accumulation, labor force and human capital. Estimation results at the aggregate level indicate that total external debts affect economic growth positively. In particular, one percentage point increase in total external debts generates 1.29 percentage point of e...

  10. Dental hygiene student experiences in external placements in Australia.

    Science.gov (United States)

    Taylor, Jane A; Hayes, Melanie J; Wallace, Linda

    2012-05-01

    While placements in external locations are being increasingly used in dental education globally, few studies have explored the student learning experience at such placements. The purpose of this study was to investigate student experiences while on external placement in a baccalaureate dental hygiene program. A self-reporting questionnaire was distributed to final-year dental hygiene students (n=77) at the University of Newcastle, Australia, in 2010. The questionnaire included questions regarding the type of placement, experiences offered, supervision, resources available, and lasting impressions. Responding students were generally positive about their external placement experience and indicated that the majority of facilities provided them with the opportunity to provide direct patient care and perform clinical tasks typical of a practicing hygienist. However, there was a statistically significant difference in their opinions about discipline-focused and community placements. Students indicated that their external placement experience provided opportunities to learn more about time and patient management, including hands-on experience with specific clinical tasks. Ongoing evaluations are necessary to ensure that external placements meet both student needs and intended learning outcomes within dental hygiene programs.

  11. 1997 DOE technical standards program workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. The workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.

  12. Quantum Electrodynamics on background external fields

    CERN Document Server

    Marecki, P

    2003-01-01

    The quantum electrodynamics in presence of background external fields is developed. Modern methods of local quantum physics allow to formulate the theory on arbitrarily strong possibly time-dependent external fields. Non-linear observables which depend only locally on the external field are constructed. The tools necessary for this formulation, the parametrices of the Dirac operator, are investigated.

  13. 46 CFR 154.452 - External pressure.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false External pressure. 154.452 Section 154.452 Shipping... Independent Tank Type C and Process Pressure Vessels § 154.452 External pressure. The design external pressure...) for tanks without a vacuum relief valve. P2=0, or the pressure relief valve setting for an enclosed...

  14. 46 CFR 64.19 - External pressure.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false External pressure. 64.19 Section 64.19 Shipping COAST... HANDLING SYSTEMS Standards for an MPT § 64.19 External pressure. (a) A tank without a vacuum breaker must be designed to withstand an external pressure of 71/2 psig or more. (b) A tank with a vacuum breaker...

  15. 49 CFR 195.108 - External pressure.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false External pressure. 195.108 Section 195.108 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.108 External pressure. Any external pressure that will be exerted on the...

  16. Quantum electrodynamics on background external fields

    OpenAIRE

    2003-01-01

    The quantum electrodynamics in presence of background external fields is developed. Modern methods of local quantum physics allow to formulate the theory on arbitrarily strong possibly time-dependent external fields. Non-linear observables which depend only locally on the external field are constructed. The tools necessary for this formulation, the parametrices of the Dirac operator, are investigated.

  17. External rhinoplasty for the Arabian nose: a columellar scar analysis.

    Science.gov (United States)

    Foda, Hossam M T

    2004-01-01

    This study aimed to evaluate columellar scar problems after external rhinoplasty in the Arabian population, and to analyze the technical factors that help prevent such problems and maximize the scar cosmesis. The investigation was conducted in university and private practice settings of the author in Alexandria, Egypt. A total of 600 Arab patients who underwent external rhinoplasty were included in the study. All the patients underwent surgery using the external rhinoplasty approach, in which bilateral alar marginal incisions were connected by an inverted V-shaped transcolumellar incision. At completion of the procedure, a two-layer closure of the columellar incision was performed. At a minimum of 1 year postoperatively, the columellar scar was evaluated subjectively by means of a patient questionnaire, and objectively by clinical examination and comparison of the close-up pre- and postoperative basal view photographs. Objectively, anything less than a barely visible, leveled, thin, linear scar was considered unsatisfactory. Subjectively, 95.5% of the patients rated the scar as unnoticeable, 3% as noticeable but acceptable, and 1.5% as unacceptable. Objectively, the scar was unsatisfactory in 7% of the cases. This was because of scar widening with or without depression (5%), hyperpigmentation (1.5%), and columellar rim notching (0.5%). The use of a deep 6/0 polydioxanon (PDS) suture significantly decreased the incidence of scar widening (p < 0.005).The columellar incision can be used safely in the Arab population regardless of their thick, dark, and oily skin. Technical factors that contributed to the favorable outcome of the columellar scar included proper planning of location and design of the incision used, precise execution, meticulous multilayered closure, and good postoperative care.

  18. PISA 2012 Technical Report

    Science.gov (United States)

    OECD Publishing, 2014

    2014-01-01

    The "PISA 2012 Technical Report" describes the methodology underlying the PISA 2012 survey, which tested 15-year-olds' competencies in mathematics, reading and science and, in some countries, problem solving and financial literacy. It examines the design and implementation of the project at a level of detail that allows researchers to…

  19. Routledge French technical dictionary

    CERN Document Server

    1994-01-01

    The French-English volume of this highly acclaimed set consists of some 100,000 keywords in both French and English, drawn from the whole range of modern applied science and technical terminology. Covers over 70 subject areas, from engineering and chemistry to packaging, transportation, data processing and much more.

  20. Technical Due Diligence

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Varano, Mattia

    2011-01-01

    Technical Due Diligence (TDD) as an evaluation of the performance of constructed facilities has become an important new field of practice for consultants. Before the financial crisis started in autumn 2008 it represented the fastest growing activity in some consulting companies. TDD is mostly car...

  1. CATV Technical Papers.

    Science.gov (United States)

    National Cable Television Association, Inc., Washington, DC.

    Complete technical papers of the 1977 National Cable Television Association Convention are included in this report. Twenty-two of 32 papers and two abstracts cover the topics of advanced cable television techniques, human reactions to television picture impairment, special displays and services, protection from theft of service, everyday…

  2. Improved technical specifications

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, D.R.

    1994-12-31

    Improved technical specifications for nuclear power plants are outlined. The objectives of this work are to improve safety, provide a clearer understanding of safety significance, and ease NRC and industry administrative burdens. Line item improvements, bases, and implementation of the specifications are discussed.

  3. Materials Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-08-01

    Roadmap identifying the efforts of the Materials Technical Team (MTT) to focus primarily on reducing the mass of structural systems such as the body and chassis in light-duty vehicles (including passenger cars and light trucks) which enables improved vehicle efficiency regardless of the vehicle size or propulsion system employed.

  4. Application of the zoning decree in the medical sector: external radiotherapy and curietherapy; Application de l'arrete zonage dans le domaine medical: Radiotherapie externe et curietherapie

    Energy Technology Data Exchange (ETDEWEB)

    Pierrat, N. [Service de physique medicale, Institut Curie, 26 rue d' Ulm, 75005 Paris (France)

    2008-07-01

    The author presents some requirements about access to external radiotherapy rooms and curietherapy rooms according the application of a decree requiring zoning for radiotherapy practices. She also indicates some technical characteristics (radioactive sources, authorized radioactivity level). As far as curietherapy is concerned, she makes a distinction between treatments with or without a source projector, and also (in the case with a source projector) between low dose rate with caesium 137, pulsed radiation with indium 192 and high dose rate with indium 192

  5. Equilibrium Shape of Ferrofluid in the Uniform External Field

    Science.gov (United States)

    2017-07-14

    Approved for public release; distribution is unlimited. 8 1 DEFENSE TECHNICAL ( PDF ) INFORMATION CTR DTIC OCA 2 DIRECTOR ( PDF ) US ARMY...RESEARCH LAB RDRL CIO L IMAL HRA MAIL & RECORDS MGMT 1 GOVT PRINTG OFC ( PDF ) A MALHOTRA 9 JOHNS HOPKINS UNIV ( PDF ) K HEMKER N...DAPHALAPURKAR K RAMESH J EL-AWADY M FALK L GRAHAM-BRADY T HUFNAGEL V NGUYEN M ROBBINS 4 SANDIA NATL LAB ( PDF ) J NIEDERHAUS

  6. External meeting: UNIVERSITE DE GENEVE

    CERN Multimedia

    2007-01-01

    Ecole de physiqueDépartement de physique nucléaire et corspusculaire 24, Quai Ernest-Ansermet1211 GENEVE 4Tél: (022) 379 62 73Fax: (022) 379 69 92 Monday 9 July 2007 COLLOQUIUM at 17.00 hrs - Stückelberg Auditorium Control and Analysis of Dynamics in the Microworld:From Quantum Systems to Biosystems by Prof. Herschel Rabitz / Princeton University The study of quantum system dynamics and biosystem dynamics have generally developed as distinct subjects with their own scientific issues, technical aspects and applications. However, when these subjects are considered in the context of controlling their respective dynamical behavior many common conceptual threads and even algorithms for operation become apparent by their linkage to systems analysis. These common operational features exist despite the fact that quantum systems and biosystems operate on vastly different temporal and spatial scales. In the case of quantum systems, manipulation of their dynamics may be affected...

  7. Externally Wetted Ionic Liquid Thruster

    Science.gov (United States)

    Lozano, P.; Martinez-Sanchez, M.; Lopez-Urdiales, J. M.

    2004-10-01

    This paper presents initial developments of an electric propulsion system based on ionic liquid ion sources (ILIS). Propellants are ionic liquids, which are organic salts with two important characteristics; they remain in the liquid state at room temperature and have negligible vapor pressure, thus allowing their use in vacuum. The working principles of ILIS are similar to those of liquid metal ion sources (LMIS), in which a Taylor cone is electrostatically formed at the tip of an externally wetted needle while ions are emitted directly from its apex. ILIS have the advantage of being able to produce negative ions that have similar masses than their positive counterparts with similar current levels. This opens up the possibility of achieving plume electrical neutrality without electron emitters. The possible multiplexing of these emitters is discussed in terms of achievable thrust density for applications other than micro-propulsion.

  8. External symmetry in general relativity

    CERN Document Server

    Cotaescu, I I

    2000-01-01

    We propose a generalization of the isometry transformations to the geometric context of the field theories with spin where the local frames are explicitly involved. We define the external symmetry transformations as isometries combined with suitable tetrad gauge transformations and we show that these form a group which is locally isomorphic with the isometry one. We point out that the symmetry transformations that leave invariant the equations of the fields with spin have generators with specific spin terms which represent new physical observables. The examples we present are the generators of the central symmetry and those of the maximal symmetries of the de Sitter and anti-de Sitter spacetimes derived in different tetrad gauge fixings. Pacs: 04.20.Cv, 04.62.+v, 11.30.-j

  9. Monte Carlo radiation transport in external beam radiotherapy

    OpenAIRE

    Çeçen, Yiğit

    2013-01-01

    The use of Monte Carlo in radiation transport is an effective way to predict absorbed dose distributions. Monte Carlo modeling has contributed to a better understanding of photon and electron transport by radiotherapy physicists. The aim of this review is to introduce Monte Carlo as a powerful radiation transport tool. In this review, photon and electron transport algorithms for Monte Carlo techniques are investigated and a clinical linear accelerator model is studied for external beam radiot...

  10. Effects of external stress on defect complexes in semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Tessema, Genene [Department of Physics, Addis Ababa University, PO Box 1176, Addis Ababa (Ethiopia); Helmholtz-Institut fuer Strahlen und Kernphysik, Nussalle 14-16, 53115 Bonn (Germany)

    2007-07-04

    Crystal field gradients that exist at lattice sites in solids depend on the symmetry of charge distribution around atomic sites. The charge symmetry could be broken either by the presence of impurity complexes in the host matrix or by external stress on the samples, which leads to an observable magnitude of electric field gradients (EFGs). The perturbed {gamma}-{gamma} angular correlation (PAC) method is employed here to investigate the effect of uniaxial stress on {sup 111}Cd sites in crystalline doped semiconductors.

  11. Impulsive Flocking of Dynamical Multiagent Systems with External Disturbances

    Directory of Open Access Journals (Sweden)

    Fujun Han

    2017-01-01

    Full Text Available Flocking motion of multiagent systems is influenced by various external disturbances in complex environment. By applying disturbance observer, flocking of multiagent systems with exogenous disturbances is studied. Based on the robust features of impulsive control, a distributed impulsive control protocol is presented with disturbance observer, and flocking motion of multiagent systems is analyzed. Moreover, a sufficient condition is obtained to ensure the flocking motion of multiagent systems following a leader. Finally, simulation results show the validity of the theoretical conclusion.

  12. The Technical Research for Massive Messages Distribution and llustration in PGIS%多源海量消息分发与展示技术及其在警用地理信息系统中的应用

    Institute of Scientific and Technical Information of China (English)

    张业宏; 张黎明; 邓跃进; 尚东方

    2011-01-01

    A PGIS requiups the ability to distribute and display massive multi-source and realtime position messages.With analyzing the Imperfect of the current location based system in the methods of accessing,distributing and displaying the position messages used in police,this paper provided an improved methods with system architecture,organization of multi-source,introduction of the technology to distribute and display the massive message.And the method of displaying is based on independent caching and batch updating technology.%警用地理信息系统要求能够实时分发和显示以定位信息为主的多源海量消息.本文针对公安行业目前GPS定位系统在多源消息接入、海量信息实时分发和显示技术的不足情况,提出多源海量消息多级实时分发技术以及基于独立缓存与批量更新技术的展示技术,介绍了该方法采用的系统构架、多源消息的接入、海量消息多级分布技术以及实时数据的高效展示技术.

  13. Technical Basis Document for PFP Area Monitoring Dosimetry Program

    CERN Document Server

    Cooper, J R

    2000-01-01

    This document describes the phantom dosimetry used for the PFP Area Monitoring program and establishes the basis for the Plutonium Finishing Plant's (PFP) area monitoring dosimetry program in accordance with the following requirements: Title 10, Code of Federal Regulations (CFR), part 835, ''Occupational Radiation Protection'' Part 835.403; Hanford Site Radiological Control Manual (HSRCM-1), Part 514; HNF-PRO-382, Area Dosimetry Program; and PNL-MA-842, Hanford External Dosimetry Technical Basis Manual.

  14. Technical Assistance Needs Assessments (TANAs)

    Science.gov (United States)

    The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

  15. El Salvador - Formal Technical Education

    Data.gov (United States)

    Millennium Challenge Corporation — With a budget of nearly $20 million, the Formal Technical Education Sub-Activity was designed to strengthen technical and vocational educational institutions in the...

  16. Electric power distribution handbook

    CERN Document Server

    Short, Thomas Allen

    2014-01-01

    Of the ""big three"" components of electrical infrastructure, distribution typically gets the least attention. In fact, a thorough, up-to-date treatment of the subject hasn't been published in years, yet deregulation and technical changes have increased the need for better information. Filling this void, the Electric Power Distribution Handbook delivers comprehensive, cutting-edge coverage of the electrical aspects of power distribution systems. The first few chapters of this pragmatic guidebook focus on equipment-oriented information and applications such as choosing transformer connections,

  17. ION-1 technical manual

    Energy Technology Data Exchange (ETDEWEB)

    Halbig, J.K.; Caine, J.C.

    1985-07-01

    The portable gamma-ray and neutron detector electronics (ION-1) gives a digital readout of the current-mode response produced by gamma rays in an ion chamber and of amplification and scaling of pulses received from a neutron detector. The primary application is the measurement of gamma-ray and neutron activity of irradiated reactor fuels stored at a reactor or at a storage pond away from a reactor. ION-1 is the first such instrument to use a design that allows communication of procedures, response, and results between instrument and inspector. It prompts the inspector through procedures, carries out programmed measurement steps, calculates results and error estimates, and performs internal diagnostic checks. This Technical Manual describes adjustment procedures and limited technical information that enable the inspector to troubleshoot at the board level. 5 figs., 10 tabs.

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: PowerPoint 2003 (F) : 25.4.2005 (1 jour) WORD 2003 - niveau 1 : 2 & 3.5.2005 (2 jours) FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11 & 12.5.2005 (2 days) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) Introduction to ANSYS: 21 - 24.6.2005 (4 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  19. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) Technical Training Monique Duval - Tel.74924 technical.training@cern.ch

  20. Independent technical review, handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  1. Bioethics for Technical Experts

    Science.gov (United States)

    Asano, Shigetaka

    Along with rapidly expanding applications of life science and technology, technical experts have been implicated more and more often with ethical, social, and legal problems than before. It should be noted that in this background there are scientific and social uncertainty elements which are inevitable during the progress of life science in addition to the historically-established social unreliability to scientists and engineers. In order to solve these problems, therefore, we should establish the social governance with ‘relief’ and ‘reliance’ which enables for both citizens and engineers to share the awareness of the issues, to design social orders and criterions based on hypothetical sense of values for bioethics, to carry out practical use management of each subject carefully, and to improve the sense of values from hypothetical to universal. Concerning these measures, the technical experts can learn many things from the present performance in the medical field.

  2. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Mike, J., P.E.

    2012-08-30

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  3. Understanding Socio Technical Modularity

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Kudsk, Anders; Hvam, Lars

    2011-01-01

    Modularity has gained an increasing popularity as a central concept for exploring product structure, process structure, organization structure and supply chain structure. With the offset in system theory the predominant understanding of modularity however faces difficulties in explaining the social...... dimension of modularity like irrational behaviors, cultural differences, learning processes, social organization and institutional influences on modularity. The paper addresses this gab offering a reinterpretation of the modularity concept from a socio-technical perspective in general and Actor Network...... Theory in particular. By formulating modularity from an ANT perspective covering social, material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity. The theoretical framework is illustrated...

  4. Manageability of Technical Innovation through Technical Property Rights

    Directory of Open Access Journals (Sweden)

    Michael Horeth

    2016-06-01

    Full Text Available The term innovation is used in many respects and has been evolving over the last decades. This paper mainly focusses on managing technical innovation and differentiates this kind of innovation from others. For managing technical innovation, this work applies technical property rights, patents and utility models. The opportunity to protect the companies’ technical knowledge legally is, apart from strategic measurements like trade secrecy, a very valuable tool to manage and commercialize innovation considering the shift from closed to rather open innovation. This paper discusses the applicability of legal protection measurements for the management of technical innovation containing a critical appraisal.

  5. Percutaneous vertebroplasty: technical considerations

    Institute of Scientific and Technical Information of China (English)

    Gao-jun TENG; Shi-cheng HE

    2005-01-01

    Percutaneous vertebroplasty (PVP) is a relative new interventional technique, which is widely used in treatment of vertebral collapse caused by vertebral neoplasms and osteoporotic compression fractures. The general technical considerations of PVP techniques are discussed based on authors' experience obtained over 400 patients in the past years in this article, including preparation of PMMA, instrument of PVP, guidance and puncture approaches, and technique of the procedure, etc. The conclusion is that PVP is a safe procedure if the physicians handle it properly.

  6. Understanding Socio Technical Modularity

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Kudsk, Anders; Hvam, Lars

    2011-01-01

    Modularity has gained an increasing popularity as a central concept for exploring product structure, process structure, organization structure and supply chain structure. With the offset in system theory the predominant understanding of modularity however faces difficulties in explaining the social...... Theory in particular. By formulating modularity from an ANT perspective covering social, material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity. The theoretical framework is illustrated...

  7. Technical approach document

    Energy Technology Data Exchange (ETDEWEB)

    1989-12-01

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs.

  8. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department Electronic Design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 4 places Electrostatique / Protection ESD 28-Sep-12 to 28-Sep-12 3 hours French 25 places Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 14 places Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 9 places LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places LabVIEW for Experts 24-Sep-12 to 28-Sep-12 5 days English 6 places LabVIEW for beginners 15-Oct-12 to 17-...

  9. [Analysis of the results of the SEIMC External Quality Control Program. Year 2008].

    Science.gov (United States)

    Serrano, María del Remedio Guna; Mira, Nieves Orta; de Gopegui, Enrique Ruiz; Ovies, María Rosario; Cardona, Concepción Gimeno; Pérez, José L

    2010-01-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria and virology. This article present the most relevant conclusions and lessons from the 2008 controls. As a whole, the results obtained in 2008 confirm the excellent skill and good technical standards of the microbiology laboratories in Spain found in previous editions. However, a few deviations can be obtained in any laboratory, even in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal an external controls in order to assure the maximal quality of the microbiological tests.

  10. [Analysis of the results of the SEIMC External Quality Control Program. Year 2012].

    Science.gov (United States)

    de Gopegui Bordes, Enrique Ruiz; Guna Serrano, M del Remedio; Orta Mira, Nieves; Ovies, María Rosario; Poveda, Marta; Gimeno Cardona, Concepción

    2014-02-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2012 controls. As a whole, the results obtained in 2012 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests.

  11. [Analysis of the results of the SEIMC External Quality Control Program. Year 2014].

    Science.gov (United States)

    Gopegui Bordes, Enrique Ruiz de; Guna Serrano, M Del Remedio; Orta Mira, Nieves; Medina González, Rafael; Rosario Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción

    2016-07-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2014 controls. As a whole, the results obtained in 2014 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of the SEIMC program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests.

  12. Total Quality Management Implementation at the Defense Technical Information Center

    Science.gov (United States)

    1989-09-01

    improvement programs. -- 7- 14. SUBJECT TERMS 15. NUMBER OF PAGES TOM ( Total Quality Management ), Continuous Process Improvement, ________ Collection and...TECHNICAL INFORMATION CENTER September 1989 Approved for Public Release; Distribution is Unlimited. I8 . 22 ~89 9 29 0 22 TOTAL QUALITY MANAGEMENT IMPLEMENTATION...technical information support, services, and products to the DoD research and development community. The DTIC Total Quality Management (TQM

  13. Study on external beam radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Mi Sook; Yoo, Seoung Yul; Yoo, Hyung Jun; Ji, Young Hoon; Lee, Dong Han; Lee, Dong Hoon; Choi, Mun Sik; Yoo, Dae Heon; Lee, Hyo Nam; Kim, Kyeoung Jung

    1999-04-01

    To develop the therapy technique which promote accuracy and convenience in external radiation therapy, to obtain the development of clinical treatment methods for the global competition. The contents of the R and D were 1. structure, process and outcome analysis in radiation therapy department. 2. Development of multimodality treatment in radiation therapy 3. Development of computation using networking techniques 4. Development of quality assurance (QA) system in radiation therapy 5. Development of radiotherapy tools 6. Development of intraoperative radiation therapy (IORT) tools. The results of the R and D were 1. completion of survey and analysis about Korea radiation therapy status 2. Performing QA analysis about ICR on cervix cancer 3. Trial of multicenter randomized study on lung cancers 4. Setting up inter-departmental LAN using MS NT server and Notes program 5. Development of ionization chamber and dose-rate meter for QA in linear accelerator 6. Development on optimized radiation distribution algorithm for multiple slice 7. Implementation on 3 dimensional volume surface algorithm and 8. Implementation on adaptor and cone for IORT.

  14. Experimental Investigation and Analysis on Temperature Distribution in Water Pool of External Reactor Vessel Cooling System%压力容器外部冷却系统冷却水池温度场的实验研究及分析

    Institute of Scientific and Technical Information of China (English)

    李永春; 李飞; 程旭; 杨燕华

    2013-01-01

    压力容器外部非能动冷却系统采用换料水池作为冷却水源。在浮升力驱动的自然循环流动作用下,冷却水池内会逐渐出现热分层现象。本实验基于先进压水堆压力容器外部冷却系统模拟装置REPEC实验回路,通过测量实验系统内冷却水箱的温度场空间分布,对冷却水池的热分层与混合现象、发展规律和主要影响因素进行了实验分析。结果表明:实验水箱内温度场分布差异主要表现在高度方向;循环流量是影响热分层的重要参数,而水箱工质初始温度的影响非常微弱;针对本实验的无量纲一维瞬态温度场方程分析表明,水箱内温度场的发展规律主要受对流传热控制。%In the external reactor vessel passive cooling system ,the refueling water pool is used as the heat trap .Driven by buoyancy force ,thermal stratification phenomena occur spontaneously in the pool . T he thermal stratification and mixing phenomena , development process and main influencing factors in the refueling water pool with the REPEC test facility were studied .The experimental results show that the temperature distribution in the experimental water tank varies with height ,the circulation flow is one of the most important factors w hich influence the thermal stratification process in the water tank ,and the effect of initial water temperature is negligible .The analysis result of the 1-D non-dimensional transient temperature field equation show s that the development of the temperature field in the water tank is mainly controlled by convective heat transfer .

  15. Final Technical Report for Interagency Agreement No. DE-SC0005453 “Characterizing Aerosol Distributions, Types, and Optical and Microphysical Properties using the NASA Airborne High Spectral Resolution Lidar (HSRL) and the Research Scanning Polarimeter (RSP)”

    Energy Technology Data Exchange (ETDEWEB)

    Hostetler, Chris [NASA Langley Research Center, Hampton, VA (United States); Ferrare, Richard [NASA Langley Research Center, Hampton, VA (United States)

    2015-01-13

    Measurements of the vertical profile of atmospheric aerosols and aerosol optical and microphysical characteristics are required to: 1) determine aerosol direct and indirect radiative forcing, 2) compute radiative flux and heating rate profiles, 3) assess model simulations of aerosol distributions and types, and 4) establish the ability of surface and space-based remote sensors to measure the indirect effect. Consequently the ASR program calls for a combination of remote sensing and in situ measurements to determine aerosol properties and aerosol influences on clouds and radiation. As part of our previous DOE ASP project, we deployed the NASA Langley airborne High Spectral Resolution Lidar (HSRL) on the NASA B200 King Air aircraft during major field experiments in 2006 (MILAGRO and MaxTEX), 2007 (CHAPS), 2009 (RACORO), and 2010 (CalNex and CARES). The HSRL provided measurements of aerosol extinction (532 nm), backscatter (532 and 1064 nm), and depolarization (532 and 1064 nm). These measurements were typically made in close temporal and spatial coincidence with measurements made from DOE-funded and other participating aircraft and ground sites. On the RACORO, CARES, and CalNEX missions, we also deployed the NASA Goddard Institute for Space Studies (GISS) Research Scanning Polarimeter (RSP). RSP provided intensity and degree of linear polarization over a broad spectral and angular range enabling column-average retrievals of aerosol optical and microphysical properties. Under this project, we analyzed observations and model results from RACORO, CARES, and CalNex and accomplished the following objectives. 1. Identified aerosol types, characterize the vertical distribution of the aerosol types, and partition aerosol optical depth by type, for CARES and CalNex using HSRL data as we have done for previous missions. 2. Investigated aerosol microphysical and macrophysical properties using the RSP. 3. Used the aerosol backscatter and extinction profiles measured by the HSRL

  16. Islanded operation of distribution networks

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This report summarises the results of a study assessing the benefits and risks to distribution network of generator islanding and examining the technical, commercial and regulatory changes required to facilitate the operation of islanding. The background to the study is traced, and details are given of a literature review, the technical criteria for operating sections of the network in islanding mode, and the impact of islanding on trading. Case studies and a detailed implementation plan, data acquisition, and commercial incentives are discussed.

  17. ANALYSIS OF EXTERNAL FACTORS AFFECTING THE PRICING

    Directory of Open Access Journals (Sweden)

    Irina A. Kiseleva

    2013-01-01

    Full Text Available The external factors influencing the process of formation of tariffs of commercial services are considered in the article. External environment is known to be very diverse and changeable. Currently, pricing has become one of the key processes of strategic development of a company. Pricing in the service sector, in turn, is highly susceptible to changes in the external environment. Its components directly or indirectly affect the market of services, changing it adopted economic processes. As a rule, firms providing services can’t influence the changes in external factors. However, the service market is very flexible, which enables businesses to reshape pricing strategy, to adapt it to the new environment.

  18. Evaluating the effect of organization and context on technical efficiency: a second-stage DEA analysis of Italian hospitals

    Directory of Open Access Journals (Sweden)

    Domenica Matranga

    2013-10-01

    Full Text Available Objective: the purpose of this study was to compare the technical efficiency of Italian hospitals at a regional level and to examine if differences could be explained by organisational and contextual factors. Technical efficiency was defined as the ability of the operating units evaluated to use optimal resource levels for their level of output.Methods: the effect of external factors was explored through a second stage Data Envelopment Analysis (DEA. Efficiency scores were calculated for each hospital using the DEA method (Stage I. Through Tobit regression analysis, the estimated efficiency scores were regressed against a set of organisational and contextual characteristics beyond managerial control, which reflected differences in the population demographics and regional health expenditure (Stage II. Stage I and Stage II efficiency scores were compared in order to indirectly assess managerial contribution in relation to hospital efficiency.Results: the highest efficiency (M±SD was observed in hospitals in the North-West (75.7±15.1, followed by those in the North-East (75.5±15.1, Central Italy (73.9±16.4 and then Southern Italy (70.6±17.9. Hospital Trusts (HTs were shown to be more technically efficient than Local Public Hospitals (LPHs. Organisational and contextual indicators were statistically significantly different at Tobit regression analysis for HTs and LPHs. Emilia Romagna and Lombardia were the regions whose management contributed to increased efficiency.Conclusions: in our study, the distribution of regions according to technical efficiency only partly reflected the North-South gradient shown by other studies regarding the gap of expenditure. The important role of organisation and environment in establishing efficiency differences among hospitals was demonstrated. 

  19. Consolidation on civil engineering and technical infrastructure

    CERN Document Server

    Alves, P; Pepinster, P; van Baaren, W; CERN. Geneva. ST Division

    2003-01-01

    The use and age of the civil engineering structure (office buildings, halls, tunnels) and of tertiary technical equipment (mainly HVAC and electricity) at CERN is such that their renovation must be considered in the near future. Due to the large number of buildings and equipment in these conditions, and the restricted budget available it is extremely important to define priorities. The aim of this paper is to give an overview of the current conditions and the related problems, based on data analysis of CERN database and confronting it with the inventory made at CERN by an external company. After having identified the most frequent problems and repairs to carry out, a planning for intervention is therefore presented optimizing the safety aspects, maintenance costs and comfort for the users. The timescale of this intervention is related to the money that will be available in the coming years.

  20. Implementation of ionoluminescence in the AGLAE scanning external microprobe

    Science.gov (United States)

    Pichon, L.; Calligaro, T.; Gonzalez, V.; Lemasson, Q.; Moignard, B.; Pacheco, C.

    2015-04-01

    The scope of this work is to present the implementation of an IBIL imaging system in the scanning external microprobe of the AGLAE facility so as to correlate luminescence and composition maps provided by PIXE, RBS and PIGE. The challenging integration of the optical spectrometer, due to incompatibility of acquisition timings and data formats with the other IBA channels has motivated the development of a specific acquisition system. This article details the IBIL setup and explains the technical solutions retained for the coupling of IBIL with IBA techniques in order to produce fast and large IBIL-IBA maps. The IBIL maps stored in the same format as the PIXE, RBS and PIGE ones can be visualised and compared using the dedicated AGLAEmap program or the PyMCA processing package. An example of such a coupled mapping on Mesoamerican jade is presented to emphasise the interest of performing simultaneously IBA and IBIL large mappings.

  1. Control of External Kink Instability

    Science.gov (United States)

    Navratil, Gerald

    2004-11-01

    A fundamental pressure and current limiting phenomenon in magnetically confined plasmas for fusion energy is the long wavelength ideal-MHD kink mode. These modes have been extensively studied in tokamak and reversed field pinch (RFP) devices. They are characterized by significant amplitude on the boundary of the confined plasma and can therefore be controlled by manipulation of the external boundary conditions. In the past ten years, the theoretically predicted stabilizing effect of a nearby conducting wall has been documented in experiments, which opens the possibility of a significant increase in maximum stable plasma pressure. While these modes are predicted to remain unstable when the stabilizing wall is resistive, their growth rates are greatly reduced from the hydrodynamic time scale to the time scale of magnetic diffusion through the resistive wall. These resistive wall slowed kink modes have been identified as limiting phenomena in tokamak (DIII-D, PBX-M, HBT-EP, JT-60U, JET, NSTX) and RFP (HBTX, Extrap, T2R) devices. The theoretical prediction of stabilization to nearly the ideal wall pressure limit by toroidal plasma rotation and/or active feedback control using coils has recently been realized experimentally. Sustained, stable operation at double the no-wall pressure limit has been achieved. Discovery of the phenomenon of resonant field amplification by marginally stable kink modes and its role in the momentum balance of rotationally stabilized plasmas has emerged as a key feature. A theoretical framework, based on an extension of the very successful treatment of the n=0 axisymmetric mode developed in the early 1990's, to understand the stabilization mechanisms and model the performance of active feedback control systems is now established. This allows design of kink control systems for burning plasma experiments like ITER.

  2. World wide web implementation of the Langley technical report server

    Science.gov (United States)

    Nelson, Michael L.; Gottlich, Gretchen L.; Bianco, David J.

    1994-01-01

    On January 14, 1993, NASA Langley Research Center (LaRC) made approximately 130 formal, 'unclassified, unlimited' technical reports available via the anonymous FTP Langley Technical Report Server (LTRS). LaRC was the first organization to provide a significant number of aerospace technical reports for open electronic dissemination. LTRS has been successful in its first 18 months of operation, with over 11,000 reports distributed and has helped lay the foundation for electronic document distribution for NASA. The availability of World Wide Web (WWW) technology has revolutionized the Internet-based information community. This paper describes the transition of LTRS from a centralized FTP site to a distributed data model using the WWW, and suggests how the general model for LTRS can be applied to other similar systems.

  3. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  4. Technical barrier challenges

    Institute of Scientific and Technical Information of China (English)

    李思佳

    2014-01-01

    according to a famouse report,the foreign Technical Barriers to Trade(TBT)have some effects on the exports of the People’s Republic of China.Major findings are as follows:(1)TBT makes it more difficult for China to export;(2)TBT increases the costs of Chinese export commodities;(3)TBT causes friction and confilicts in the international trade;(4)SOME developed countries have moved their phase-outs to China and other developing countries,which have become victims of TBT.

  5. RADTRAN 6 technical manual.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O' Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  6. RADTRAN 6 Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neuhauser, Karen Sieglinde [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heames, Terence John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); O' Donnell, Brandon M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dennis, Matthew L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  7. Distributed plot-making

    DEFF Research Database (Denmark)

    Jensen, Lotte Groth; Bossen, Claus

    2016-01-01

    different socio-technical systems (paper-based and electronic patient records). Drawing on the theory of distributed cognition and narrative theory, primarily inspired by the work done within health care by Cheryl Mattingly, we propose that the creation of overview may be conceptualised as ‘distributed plot......-making’. Distributed cognition focuses on the role of artefacts, humans and their interaction in information processing, while narrative theory focuses on how humans create narratives through the plot construction. Hence, the concept of distributed plot-making highlights the distribution of information processing...... between different social actors and artefacts, as well as the filtering, sorting and ordering of such information into a narrative that is made coherent by a plot. The analysis shows that the characteristics of paper-based and electronic patient records support or obstruct the creation of overview in both...

  8. Energy Systems Integration Facility (ESIF) External Stakeholders Workshop: Workshop Proceedings, 9 October 2008, Golden, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Komomua, C.; Kroposki, B.; Mooney, D.; Stoffel, T.; Parsons, B.; Hammond, S.; Kutscher, C.; Remick, R.; Sverdrup, G.; Hawsey, R.; Pacheco, M.

    2009-01-01

    On October 9, 2008, NREL hosted a workshop to provide an opportunity for external stakeholders to offer insights and recommendations on the design and functionality of DOE's planned Energy Systems Infrastructure Facility (ESIF). The goal was to ensure that the planning for the ESIF effectively addresses the most critical barriers to large-scale energy efficiency (EE) and renewable energy (RE) deployment. This technical report documents the ESIF workshop proceedings.

  9. TECHNICAL SUPPORT AS A BASIS OF HIGH AVAILABILITY LEVEL AND IT SYSTEM SERVICE QUALITY

    Directory of Open Access Journals (Sweden)

    Dejan Vidojevic

    2007-06-01

    Full Text Available This work presents the development and implementation methodology of technical support in IT1system operation. Methodology is developed and applied in realistic system (Information system of the Tax administration - DIS 2003, which is technically very complex and highly distributed. The results of IT system availability assessment and identification of the critical components are input parameters in the process of establishing of the technical support. The importance of technical support for achieving optimal IT system availability and IT service quality is assessed according to its operation during one year. The history of technical support system operation is a basis for further continuous improvement.

  10. Scientific and Technical Information Output of the Langley Research Center, for calendar year 1976

    Science.gov (United States)

    1976-01-01

    Documents listed include NASA Technical Reports, Technical Notes, Technical Memorandums, Special Publications, Contractor Reports, journal articles, and technical presentations made at Society meetings. NASA formal reports listed are those that were mailed and distributed to the ultimate user. The material presented here is listed first by Division and then under the following headings: (a) Formal Reports, (b) Contractor Reports, (c) Articles and Meeting Presentations, and (d) High Number Technical Memorandums (High TMX's). Under each heading, the material cited authors in alphabetical order. If a report has more than one author and these authors are from different Divisions, the report is listed only once, under the senior author's name.

  11. Agricultural Production and Externalities Simulator (APES) prototype to be used in Prototype 1 of SEAMLESS-IF

    NARCIS (Netherlands)

    Donatelli, M.; Evert, van F.K.; Rutgers, B.; Trevisan, M.; Ewert, F.; Sorce, A.; Balderacchi, M.; Guardo, Di A.; Leffelaar, P.A.; Meuter, E.C.; Adam, M.Y.O.; Smith, J.; Gottschalk, P.; Acutis, M.; Trevisiol, P.; Gentile, A.; Bellocchi, G.; Carlini, L.; Duru, M.; Cruz, P.; Gary, C.; Kansou, K.; Wery, J.; Dupraz, C.; Braudeau, E.; Martin, P.

    2007-01-01

    The Agricultural Production and Externalities Simulator is a modular simulation system targeted at estimating the biophysical behaviour of agricultural production systems in response to the interaction of soil-weather and different options of agro-technical management. APES is currently meant to be

  12. The Impact of Identifying a Specific Purpose and External Audience for Writing on Second Graders' Writing Quality

    Science.gov (United States)

    Block, Meghan K.

    2013-01-01

    The Common Core State Standards for English Language Arts and Literacy in History/Social Studies, Science, and Technical Subjects (CCSS) emphasize the importance of writing and specify that students should write for external, and, at times, unfamiliar audiences. Given the relationship between audience specification and quality writing in older…

  13. Technical Problems of the Principle of Distribution According to Work and Thinking on the Meaning of the System%按劳分配原则的技术难题及其制度意义思考

    Institute of Scientific and Technical Information of China (English)

    于喜繁

    2014-01-01

    According to Karl Marx, the standards of distribution according to work are mainly about work hours, rate of work and labour output. While, rate of work cannot be directly calculated, work hours cannot match labour output. Moreover, only the homogenous labour can measure output without consideration of quali⁃ty. Thus, all three measurements (work hours, rate of work and labour output) share the systemetical problem of inaccuracy.%马克思所理解的按劳分配标准,主要是指劳动时间、劳动强度和劳动产品的数量标准三种形式。但是,劳动强度无法直接计量,劳动时间又与劳动量无法吻合,并且,只有同质性劳动才能忽略质的考虑只计量劳动数量。因此,无论是劳动时间、劳动强度还是劳动产品的数量标准,都存有衡量不准的技术难题。

  14. Externalities and Compensation : Primeval Games and Solutions

    NARCIS (Netherlands)

    Ju, Y.; Borm, P.E.M.

    2005-01-01

    The classical literature (Pigou (1920), Coase (1960), Arrow (1970)) and the relatively recent studies (cf.Varian (1994)) associate the externality problem with efficiency.This paper focuses explicitly on the compensation problem in the context of externalities.To capture the features of inter-indivi

  15. Concurrent sourcing and external supplier opportunism

    DEFF Research Database (Denmark)

    Mols, Niels Peter

    When a firm simultaneously makes and buys the same components then the firm uses concurrent sourcing. This paper presents an agency model for explaining how and when concurrent sourcing reduces the likelihood of external supplier opportunism. In the proposed model, the external supplier’s expected...

  16. Crossing boundaries : Involving external parties in innovation

    NARCIS (Netherlands)

    Slot, J.H.

    2013-01-01

    To improve the return on investments in innovation, firms increasingly open up their new product development (NPD) processes by inviting external parties to participate. This dissertation focuses on the involvement of three different types of external parties in the NPD process: suppliers, customers

  17. Computing betweenness centrality in external memory

    DEFF Research Database (Denmark)

    Arge, Lars; Goodrich, Michael T.; Walderveen, Freek van

    2013-01-01

    Betweenness centrality is one of the most well-known measures of the importance of nodes in a social-network graph. In this paper we describe the first known external-memory and cache-oblivious algorithms for computing betweenness centrality. We present four different external-memory algorithms...

  18. Lattice Planar QED in external magnetic field

    CERN Document Server

    Cea, Paolo; Giudice, Pietro; Papa, Alessandro

    2011-01-01

    We investigate planar Quantum ElectroDynamics (QED) with two degenerate staggered fermions in an external magnetic field on the lattice. Our preliminary results indicate that in external magnetic fields there is dynamical generation of mass for two-dimensional massless Dirac fermions in the weak coupling region. We comment on possible implications to the quantum Hall effect in graphene.

  19. Internal and External Forces in Language Change.

    Science.gov (United States)

    Yang, Charles D.

    2000-01-01

    Develops a model of language change characterizing the dynamic interaction between internal universal grammar and external linguistic evidence, as mediated by language acquisition. Borrows insights from the study of biological evolution, where internal and external forces interact in similar fashion. Applies the model to explore the loss of the…

  20. Forms of Spanking and Children's Externalizing Behaviors

    Science.gov (United States)

    Lansford, Jennifer E.; Wager, Laura B.; Bates, John E.; Pettit, Gregory S.; Dodge, Kenneth A.

    2012-01-01

    Research suggests that corporal punishment is related to higher levels of child externalizing behavior, but there has been controversy regarding whether infrequent, mild spanking predicts child externalizing or whether more severe and frequent forms of corporal punishment account for the link. Mothers rated the frequency with which they spanked…

  1. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

  2. Technical training: places available

    CERN Multimedia

    HR Department

    2007-01-01

    CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

  3. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work ...

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 28.6 - 1.7.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCES...

  5. Technical Training: Places available**

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

  6. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

  7. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

  8. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

  9. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 day...

  10. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 - 30.4.2004 (5 days) Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Pla...

  11. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

  12. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study for Microsoft applications :12.2.2004 (morning) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) CLEAN-2002 ...

  13. Technical Training: Places Available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

  15. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

  17. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

  18. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

  19. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW...

  20. PESTICIDE APPLICATION TECHNICS IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    Đuro Banaj

    2011-06-01

    Full Text Available The academic textbook Pesticide application tehnics improvement is the result of several-year recording theoretical models, numerous practical tests, and data collection relating to technical systems in plant protection and its environment in the narrowest sense. In this first edition, the authors cover the area they have dealt with for many years. The authors aimed to present complete and clear methods how to solve specific problems in the agricultural practice management, plant protection, and direct practice application – ‘‘Know- How'', with as many as possible useful data. References used, along with local ones, are mostly American and from Western Europe. This textbook is intended for those who already use the agricultural technique in plant protection and those who are just acquiring the basics of technical systems proper application in daily practice, regardless the size of the agricultural farm. The authors covered in details and explained some bases of physics logic, analysis, and synthesis of specific laws while using pesticides due to extremely importance in understanding the problem area.

  1. Technical Support Essentials Advice to Succeed in Technical Support

    CERN Document Server

    Sanchez, Andrew

    2010-01-01

    Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

  2. Wind Power in Electrical Distribution Systems

    DEFF Research Database (Denmark)

    Chen, Zhe

    2013-01-01

    as distributed generators in distribution systems. This paper discusses the issues of wind turbines in distribution systems. Wind power conversion systems briefly introduced, the basic features and technical characteristics of distributed wind power system are described, and the main technical demands......Recent years, wind power is experiencing a rapid growth, large number of wind turbines/wind farms have been installed and connected to power systems. In addition to the large centralised wind farms connected to transmission grids, many distributed wind turbines and wind farms are operated...

  3. Magnetic response to applied electrostatic field in external magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Adorno, T.C. [Universidade de Sao Paulo, Instituto de Fisica, Caixa Postal 66318, Sao Paulo, SP (Brazil); University of Florida, Department of Physics, Gainesville, FL (United States); Gitman, D.M. [Universidade de Sao Paulo, Instituto de Fisica, Caixa Postal 66318, Sao Paulo, SP (Brazil); Tomsk State University, Department of Physics, Tomsk (Russian Federation); Shabad, A.E. [P. N. Lebedev Physics Institute, Moscow (Russian Federation)

    2014-04-15

    We show, within QED and other possible nonlinear theories, that a static charge localized in a finite domain of space becomes a magnetic dipole, if it is placed in an external (constant and homogeneous) magnetic field in the vacuum. The magnetic moment is quadratic in the charge, depends on its size and is parallel to the external field, provided the charge distribution is at least cylindrically symmetric. This magneto-electric effect is a nonlinear response of the magnetized vacuum to an applied electrostatic field. Referring to the simple example of a spherically symmetric applied field, the nonlinearly induced current and its magnetic field are found explicitly throughout the space; the pattern of the lines of force is depicted, both inside and outside the charge, which resembles that of a standard solenoid of classical magnetostatics. (orig.)

  4. Magnetic response to applied electrostatic field in external magnetic field

    CERN Document Server

    Adorno, T C; Shabad, A E

    2014-01-01

    We show, within QED and other possible nonlinear theories, that a static charge localized in a finite domain of space becomes a magnetic dipole, if it is placed in an external (constant and homogeneous) magnetic field in the vacuum. The magnetic moment is quadratic in the charge, depends on its size and is parallel to the external field, provided the charge distribution is at least cylindrically symmetric. This magneto-electric effect is a nonlinear response of the magnetized vacuum to an applied electrostatic field. Referring to a simple example of a spherically-symmetric applied field, the nonlinearly induced current and its magnetic field are found explicitly throughout the space, the pattern of lines of force is depicted, both inside and outside the charge, which resembles that of a standard solenoid of classical magnetostatics.

  5. Technical guidance for siting criteria development

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, D.C.; Sprung, J.L.; Alpert, D.J.; Diegert, K.; Ostmeyer, R.M.; Ritchie, L.T.; Strip, D.R.; Johnson, J.D.; Hansen, K.; Robinson, J.

    1982-12-01

    Technical guidance to support the formulation and comparison of possible siting criteria for nuclear power plants has been developed in four areas: (1) consequences of hypothetical severe nuclear-power-plant accidents, (2) characteristics of population distributions about current reactor sites, (3) site availability within the continental United States, and (4) socioeconomic impacts of reactor siting. The impact on consequences of source-term magnitude, meteorology, population distribution, and emergency response have been analyzed. Population distributions about current sites were analyzed to identify statistical characteristics, time trends, and regional differences. A site-availability data bank was constructed for the continential United States. The data bank contains information about population densities, seismicity, topography, water availability, and land-use restrictions. Finally, the socioeconomic impacts of rural-industrialization projects, energy boomtowns, and nuclear power plants were examined to determine their nature, magnitude, and dependence on site demography and remoteness.

  6. CERN Technical Training: Digital Signal Processors

    CERN Multimedia

    HR Department

    2009-01-01

    A new training is going to be held at CERN on the ADSP SHARC Family. The “System Development and Programming with the Analog Devices' SHARC Family” course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or conta...

  7. Spatiotemporal neurodynamics underlying internally and externally driven temporal prediction: a high spatial resolution ERP study.

    Science.gov (United States)

    Mento, Giovanni; Tarantino, Vincenza; Vallesi, Antonino; Bisiacchi, Patrizia Silvia

    2015-03-01

    Temporal prediction (TP) is a flexible and dynamic cognitive ability. Depending on the internal or external nature of information exploited to generate TP, distinct cognitive and brain mechanisms are engaged with the same final goal of reducing uncertainty about the future. In this study, we investigated the specific brain mechanisms involved in internally and externally driven TP. To this end, we employed an experimental paradigm purposely designed to elicit and compare externally and internally driven TP and a combined approach based on the application of a distributed source reconstruction modeling on a high spatial resolution electrophysiological data array. Specific spatiotemporal ERP signatures were identified, with significant modulation of contingent negative variation and frontal late sustained positivity in external and internal TP contexts, respectively. These different electrophysiological patterns were supported by the engagement of distinct neural networks, including a left sensorimotor and a prefrontal circuit for externally and internally driven TP, respectively.

  8. Investigation of Multiscale Non-equilibrium Flow Dynamics Under External Force Field

    CERN Document Server

    Xiao, Tianbai

    2016-01-01

    The multiple scale non-equilibrium gaseous flow behavior under external force field is investigated. Both theoretical analysis based on the kinetic model equation and numerical study are presented to demonstrate the dynamic effect of external force on the flow evolution, especially on the non-equilibrium heat flux. The current numerical experiment is based on the well-balanced unified gas-kinetic scheme (UGKS), which presents accurate solutions in the whole flow regime from the continuum Navier-Stokes solution to the transition and free molecular ones. The heat conduction in the non-equilibrium regime due to the external forcing term is quantitatively investigated. In the lid-driven cavity flow study, due to the external force field the density distribution inside cavity gets stratified and a multiscale non-equilibrium flow transport appears in a single gas dynamic system. With the increment of external forcing term, the flow topological structure changes dramatically, and the temperature gradient, shearing s...

  9. WIAMan Technology Demonstrator Sensor Codes Conforming to International Organization for Standardization/Technical Standard (ISO/TS) 13499

    Science.gov (United States)

    2016-03-01

    Standardization/Technical Standard ( ISO /TS) 13499 by Michael Tegtmeyer Approved for public release; distribution is unlimited. NOTICES Disclaimers The findings...International Organization for Standardization/Technical Standard ( ISO /TS) 13499 by Michael TegtmeyerWIAMan Engineering Office, ARL Approved for public...WIAMan Technology Demonstrator Sensor Codes Conforming to International Organization for Standardization/Technical Standard ( ISO /TS) 13499 Michael

  10. Environmental externalities related to power production on biogas and natural gas based on the EU ExternE methodology

    DEFF Research Database (Denmark)

    Nielsen, Per Sieverts; Ibsen, Liselotte Schleisner

    1998-01-01

    This paper assesses the environmental impacts and external costs from selected electricity generation systems in Denmark. The assessment is carried out as part of the ExternE National Implementation, which is the second phase of the ExternE project and involves case studies from all Western Europ...... show that estimated damages due to the greenhouse effect are predominant, however, the uncertainty is high. The predominant damage at the local and regional level is related to emission of NOx, which results in effects on public health....... European countries. The project use a “bottom-up” methodology to evaluate the external costs associated with a wide range of different fuel cycles. The project has identified priority impacts, where most are impacts from air emissions. Externalities due to atmospheric emissions are calculated through...... the use of a software package, EcoSence, having an environmental database at both a local and regional level including population, crops, building materials and forest. The system also incorporates two air transport models, allowing local and regional scale modelling. The results of the Danish case study...

  11. Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Yale [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Thomas, Michael E. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Siegrist, Karen M. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Lennon, Andrew M. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Hunter, Lawrence W. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Oguz, Hasan O. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory

    2014-06-30

    JHU/APL conducted solid propellant fire characterization tests in warm, humid, ambient conditions near sea level. Yttria and ceria surrogate materials were placed in the fires. The substrates simulating ground surfaces were concrete from a Kennedy Space Center launch pad, and steel covered with a protective ablative material representing a launch platform. In-situ instrumentation consisted of witness materials, thermocouples, air handlers, filters, and cascade impactors; remote instrumentation consisted of optical cameras and spectrometers. Test and analysis team members included the Naval Air Warfare Center Aircraft Division, Sandia National Laboratories (SNL), Alliant Techsystems, and the Johns Hopkins University. Test data were analyzed, reported, and delivered, including plume rise and transport captured on video. Derivation of the alumina particle size distributions formed the basis for condensing vapor and agglomeration estimates. Assessment of alumina mass in the plume, along with the surrogate fraction from filter forensics, provided an estimate of airborne surrogate mass. Technical interchange meetings were held with SNL and the Jet Propulsion Laboratory. Specifications for the fire environment were developed and delivered. A thermochemistry model that simultaneously provides the maximum temperature and heat flux was developed and delivered. An SPIE paper on 3D pyrometry of the fire was written and presented.

  12. Technical aspects of microwave thermotherapy.

    Science.gov (United States)

    Vrba, J; Lapes, M; Oppl, L

    1999-05-01

    We describe our new technical results dealing with microwave thermotherapy (hyperthermia) in cancer treatment, see Refs. [S.B. Field, C. Franconi (Eds.), Physics and technology of hyperthermia, NATO Seminar Proceedings, Urbino, Italy, 1986; J. Hand, J.R. James (Eds.), Physical Techniques in Clinical Hyperthermia, Wiley, New York, 1986; J. Vrba, M. Lapes, Microwave Applicators for Medical Purposes, CTU Press, 1996, in Czech; J. Vrba, C. Franconi, M. Lapes, Theoretical limits for the penetration depth of the intracavitary applicators, International Journal of Hyperthermia, 12:6 (1996) 737-742; C. Franconi, J. Vrba, F. Montecchia, 27 MHz hybrid evanescent-mode applicators with flexible heating field for deep and safe subcutaneous hyperthermia, International Journal of Hyperthermia, 9:5 (1993) 655-674.]. Our research interest is to develop applicators for deep local heating and for intracavitary cancer and/or prostate treatment as well. Further, a system for 3D SAR distribution measurements in water phantom is explained. Basic evaluation of clinical results is given.

  13. Conformism and Wealth Distribution

    OpenAIRE

    Mino, Kazuo; Nakamoto, Yasuhiro

    2014-01-01

    This paper explores the role of consumption externalities in a neoclassical growth model in which households have heterogeneous preferences. We fi?nd that the degree of conformism in consumption held by each household signifi?cantly affects the speed of convergence of the aggregate economy as well as the patterns of wealth distribution in the steady state equilibrium. In particular, a higher degree of consumption conformism accelerates the convergence speed of the economy towards the steady s...

  14. Chronology of Awareness About US National Park External Threats

    Science.gov (United States)

    Shafer, Craig L.

    2012-12-01

    The objective of this paper is to raise understanding of the history of protected area external threat awareness in the United States and at World Protected Area Congresses. The earliest concerns about external threats to US national parks began in the late nineteenth century: a potential railroad transgression of Yellowstone National Park in the 1880s. During the early and mid 1930s, George Wright and colleagues focused on outside boundary concerns like of hunting and trapping of furbearers, grazing, logging, disease and hybridization between species. In the 1960s, a worldwide recognition began about the role of outside habitat fragmentation/isolation on nature reserves and human generated stressors crossing their boundaries. The State of the Park Report 1980 added a plethora of threats: oil/gas and geothermal exploration and development, hydropower and reclamation projects, urban encroachment, roads, resorts, and recreational facilities. The early 1980s ushered in political interference with NPS threats abatement efforts as well as Congressional legislative initiatives to support the abatement challenges of the agency. By 1987, the Government Accounting Office issued its first report on National Park Service (NPS) progress in dealing with external threats. Climate change impacts on parks, especially in terms of animals adjusting their temperature and moisture requirements by latitude and altitude, surfaced in the technical literature by the mid-1980s. By 1992, the world parks community stressed the need to integrate protected areas into the surrounding landscape and human community. The importance of the matrix has gradually gained appreciation in the scientific community. This chronology represents one example of national park and protected areas' institutional history contributing to the breath of modern conservation science.

  15. Mechanical engineering department technical review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B. Denney, R.M. (eds.)

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  16. Cambridge technicals level 3 IT

    CERN Document Server

    Ellis, Victoria; Middleton, Saundra

    2016-01-01

    Support your teaching of the new Cambridge Technicals 2016 suite with Cambridge Technical Level 3 IT, developed in partnership between OCR and Hodder Education; this textbook covers each specialist pathway and ensures your ability to deliver a flexible course that is both vocationally focused and academically thorough. Cambridge Technical Level 3 IT is matched exactly to the new specification and follows specialist pathways in IT Infrastructure Technician, Emerging Digital Technology Practitioner, Application Developer, and Data Analyst. - Ensures effective teaching of each specialis

  17. Mechanical Engineering Department Technical Review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Denney, R.M. (eds.)

    1981-07-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  18. Mechanical Engineering Department. Technical review

    Energy Technology Data Exchange (ETDEWEB)

    Simecka, W.B.; Condouris, R.A.; Talaber, C. (eds.)

    1980-01-01

    The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work.

  19. Mechanical Engineering Department technical abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Denney, R.M. (ed.)

    1982-07-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  20. [Analysis of the results of the SEIMC External Quality Control Program. Year 2013].

    Science.gov (United States)

    de Gopegui Bordes, Enrique Ruiz; Orta Mira, Nieves; Del Remedio Guna Serrano, M; Medina González, Rafael; Rosario Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción

    2015-07-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology, molecular microbiology and HIV-1, HCV and HBV viral loads. This manuscript presents the analysis of results obtained of the participants from the 2013 SEIMC External Quality Control Programme, except viral loads controls, that they are summarized in a manuscript abroad. As a whole, the results obtained in 2013 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests.

  1. Beyond the Horizon Distance: LIGO-Virgo can Boost Gravitational Wave Detection Rates by Exploiting the Mass Distribution of Neutron Stars

    CERN Document Server

    Bartos, Imre

    2015-01-01

    The masses of neutron stars in neutron star binaries are observed to fall in a narrow mass range around $\\sim 1.33$ M$_{\\odot}$. We explore the advantage of focusing on this region of the parameter space in gravitational wave searches. We find that an all-sky (externally triggered) search with optimally reduced template bank is expected to detect $14\\%$ ($61\\%$) more binary mergers than without the reduction. A reduced template bank can also represent significant improvement in technical cost. We also develop a more detailed search method using binary mass distribution, and find similar sensitivity increase to that due to the reduced template bank.

  2. Use of Automated External Defibrillators

    Energy Technology Data Exchange (ETDEWEB)

    Gregory K Christensen

    2009-02-01

    In an effort to improve survival from cardiac arrest, the American Heart Association (AHA) has promoted the Chain of Survival concept, describing a sequence of prehospital steps that result in improved survival after sudden cardiac arrest. These interventions include immediate deployment of emergency medical services, prompt cardiopulmonary resuscitation, early defibrillation when indicated, and early initiation of advanced medical care. Early defibrillation has emerged as the most important intervention with survival decreasing by 10% with each minute of delay in defibrillation. Ventricular Fibrillation (VF) is a condition in which there is uncoordinated contraction of the heart cardiac muscle of the ventricles in the heart, making them tremble rather than contract properly. VF is a medical emergency and if the arrhythmia continues for more than a few seconds, blood circulation will cease, and death can occur in a matter of minutes. During VF, contractions of the heart are not synchronized, blood flow ceases, organs begin to fail from oxygen deprivation and within 10 minutes, death will occur. When VF occurs, the victim must be defibrillated in order to establish the heart’s normal rhythm. On average, the wait for an ambulance in populated areas of the United States is about 11 minutes. In view of these facts, the EFCOG Electrical Safety Task Group initiated this review to evaluate the potential value of deployment and use of automated external defibrillators (AEDs) for treatment of SCA victims. This evaluation indicates the long term survival benefit to victims of SCA is high if treated with CPR plus defibrillation within the first 3-5 minutes after collapse. According to the American Heart Association (AHA), survival rates as high as 74% are possible if treatment and defibrillation is performed in the first 3 minutes. In contrast survival rates are only 5% where no AED programs have been established to provide prompt CPR and defibrillation. ["CPR statistics

  3. ERLN Technical Support for Labs

    Science.gov (United States)

    The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

  4. Technical Assistance to Brownfields Communities

    Science.gov (United States)

    This notice announces the availability of funds and solicits proposals from eligible entities (including eligible non-profit organizations) to provide technical assistance to communities on brownfields issues.

  5. Theoretical analysis of natural frequency of externally prestressed concrete beam based on rigidity correction

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    A dynamic test on externally prestressed simply supported concrete beams separately with three typical types of tendon distributions was conducted. The results show that the natural frequencies of the beams increase with the increase in the prestressing force at the tensioning stage, and the natural frequencies decrease after the cracks occur in the beams. Following the calculation formula of natural frequency of externally prestressed beam, which was reported in a literature, the natural frequencies of the...

  6. Intracavity frequency-doubled green vertical external cavity surface emitting laser

    Institute of Scientific and Technical Information of China (English)

    Yanrong Song; Peng Zhang; Xinping Zhang; Boxia Yan; Yi Zhou; Yong Bi; Zhigang Zhang

    2008-01-01

    @@ An intracavity frequency-doubled vertical external cavity surface emitting laser (VECSEL) with green light is demonstrated. The fundamental frequency laser cavity consists of a distributed Bragg reflector (DBR) of the gain chip and an external mirror. A 12-mW frequency-doubled output has been reached at 540 nm with a nonlinear crystal LBO when the fundamental frequency output is 44 mW at 1080 nm. The frequency doubling efficiency is about 30%.

  7. Ground state properties of a Bose-Einstein condensate confined in an anharmonic external potential

    Institute of Scientific and Technical Information of China (English)

    Wang Deng-Long; Yan Xiao-Hong; Tang Yi

    2004-01-01

    In light of the interference experiment of Bose-Einstein condensates, we present an anharmonic external potential model to study ground state properties of Bose-Einstein condensates. The ground state energy and the chemical potential have been analytically obtained, which are lower than those in harmonic trap. Additionally, it is found that the anharmonic strength of the external potential has an important effect on density and velocity distributions of the ground state for the Thomas-Fermi model.

  8. Technical Insights for Saltstone PA Maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G.; Sarkar, S.; Mahadevan, S.; Kosson, D.

    2011-07-20

    The Cementitious Barriers Partnership (CBP) is a collaborative program sponsored by the US DOE Office of Waste Processing. The objective of the CBP is to develop a set of computational tools to improve understanding and prediction of the long-term structural, hydraulic, and chemical performance of cementitious barriers and waste forms used in nuclear applications. CBP tools are expected to better characterize and reduce the uncertainties of current methodologies for assessing cementitious barrier performance and increase the consistency and transparency of the assessment process, as the five-year program progresses. In September 2009, entering its second year of funded effort, the CBP sought opportunities to provide near-term tangible support to DOE Performance Assessments (PAs). The Savannah River Saltstone Disposal Facility (SDF) was selected for the initial PA support effort because (1) cementitious waste forms and barriers play a prominent role in the performance of the facility, (2) certain important long-term behaviors of cementitious materials composing the facility are uncertain, (3) review of the SDF PA by external stakeholders is ongoing, and (4) the DOE contractor responsible for the SDF PA is open to receiving technical assistance from the CBP. A review of the current (SRR Closure & Waste Disposal Authority 2009) and prior Saltstone PAs (e.g., Cook et al. 2005) suggested five potential opportunities for improving predictions. The candidate topics considered were (1) concrete degradation from external sulfate attack, (2) impact of atmospheric exposure to concrete and grout before closure, such as accelerated slag and Tc-99 oxidation, (3) mechanistic prediction of geochemical conditions, (4) concrete degradation from rebar corrosion due to carbonation, and (5) early age cracking from drying and/or thermal shrinkage. The candidate topics were down-selected considering the feasibility of addressing each issue within approximately six months, and

  9. A Distributed Tier-1

    DEFF Research Database (Denmark)

    Fischer, Lars; Grønager, Michael; Kleist, Josva

    2008-01-01

    The Tier-1 facility operated by the Nordic DataGrid Facility (NDGF) differs significantly from other Tier-1s in several aspects: firstly, it is not located at one or a few premises, but instead is distributed throughout the Nordic countries; secondly, it is not under the governance of a single...... organization but instead is a meta-center built of resources under the control of a number of different national organizations. We present some technical implications of these aspects as well as the high-level design of this distributed Tier-1. The focus will be on computing services, storage and monitoring....

  10. Updating Technical Screens for PV Interconnection: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Coddington, M.; Ellis, A.; Lynn, K.; Razon, A.; Key, T.; Kroposki, B.; Mather, B.; Hill, R.; Nicole, K.; Smith, J.

    2012-08-01

    Solar photovoltaics (PV) is the dominant type of distributed generation (DG) technology interconnected to electric distribution systems in the United States, and deployment of PV systems continues to increase rapidly. Considering the rapid growth and widespread deployment of PV systems in United States electric distribution grids, it is important that interconnection procedures be as streamlined as possible to avoid unnecessary interconnection studies, costs, and delays. Because many PV interconnection applications involve high penetration scenarios, the process needs to allow for a sufficiently rigorous technical evaluation to identify and address possible system impacts. Existing interconnection procedures are designed to balance the need for efficiency and technical rigor for all DG. However, there is an implicit expectation that those procedures will be updated over time in order to remain relevant with respect to evolving standards, technology, and practical experience. Modifications to interconnection screens and procedures must focus on maintaining or improving safety and reliability, as well as accurately allocating costs and improving expediency of the interconnection process. This paper evaluates the origins and usefulness of the capacity penetration screen, offers potential short-term solutions which could effectively allow fast-track interconnection to many PV system applications, and considers longer-term solutions for increasing PV deployment levels in a safe and reliable manner while reducing or eliminating the emphasis on the penetration screen.

  11. TECHNICAL TRAINING PROGRAMME

    CERN Multimedia

    Davide Vitè

    2002-01-01

    CLEAN-2002: Working in a Cleanroom A new, free of charge, half-day seminar is offered in the context of Technical Training for the LHC, for personnel working or managing activities in a cleanroom (for example physicists, engineers and technicians working at or visiting the laboratory). CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed, if possible. More information and registration is available HERE The next session, in English, will be on 24.4 (afternoon). Other sessions, in French and English, will be offered following demand. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  12. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    John Tanis

    2005-11-25

    This document comprises the final technical report for atomic collisions research supported by DOE grant No. DE-FG02-87ER13778 from September 1, 2001 through August 31, 2004. The research involved the experimental investigation of excitation and charge-changing processes occurring in ion-atom and ion-molecule collisions. Major emphases of the study were: (1) interference effects resulting from coherent electron emission in H2, (2) production of doubly vacant K-shell (hollow ion) states due to electron correlation, and (3) formation of long-lived metastable states in electron transfer processes. During the period of the grant, this research resulted in 23 publications, 12 invited presentations, and 39 contributed presentations at national and international meetings and other institutions. Brief summaries of the completed research are presented below.

  13. Technical applications of aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  14. LLNL 1981: technical horizons

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  15. Technical Training: ELEC-2005

    CERN Multimedia

    Davide Vitè

    2005-01-01

    ELEC-2005 - Electronics in High Energy Physics: Autumn Term (November-December 2005) ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the ELEC-2002 course series. This new, comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms. The Winter (Introduction to electronics in HEP), Spring (Integrated circuits and VLSI technology for physics), and Summer (System electronics for physics: Issues) Terms already took place. The Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) is now open for online registration, and will start on November 8th with the...

  16. Final technical report

    DEFF Research Database (Denmark)

    Juhl, Thomas Winther; Nielsen, Jakob Skov

    This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial....... Phase 2: Development of mirror based test cutting heads. Phase 3: Test and evaluation of the cutting heads on high power CO2 laser sources in the 6-12 kW power range. The test phase concentrates on cutting steels, applied in the heavy industry. In the first part of the project fundamental studies have...... gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...

  17. Technical Math For Dummies

    CERN Document Server

    Schoenborn, Barry

    2010-01-01

    Technical Math For Dummies is your one-stop, hands-on guide to acing the math courses you’ll encounter as you work toward getting your degree, certifacation, or�license in the skilled trades. You’ll get easy-to-follow, plain-English guidance on mathematical formulas and methods that professionals use every day in the automotive, health, construction, licensed trades, maintenance, and other trades. You’ll learn how to apply concepts of algebra, geometry, and trigonometry and their formulas related to occupational areas of study. Plus, you’ll find out how to perform basic arithmetic

  18. Technical Report - FINAL

    Energy Technology Data Exchange (ETDEWEB)

    Barbara Luke, Director, UNLV Engineering Geophysics Laboratory

    2007-04-25

    Improve understanding of the earthquake hazard in the Las Vegas Valley and to assess the state of preparedness of the area's population and structures for the next big earthquake. 1. Enhance the seismic monitoring network in the Las Vegas Valley 2. Improve understanding of deep basin structure through active-source seismic refraction and reflection testing 3. Improve understanding of dynamic response of shallow sediments through seismic testing and correlations with lithology 4. Develop credible earthquake scenarios by laboratory and field studies, literature review and analyses 5. Refine ground motion expectations around the Las Vegas Valley through simulations 6. Assess current building standards in light of improved understanding of hazards 7. Perform risk assessment for structures and infrastructures, with emphasis on lifelines and critical structures 8. Encourage and facilitate broad and open technical interchange regarding earthquake safety in southern Nevada and efforts to inform citizens of earthquake hazards and mitigation opportunities

  19. Final technical report

    DEFF Research Database (Denmark)

    Juhl, Thomas Winther; Nielsen, Jakob Skov

    . Phase 2: Development of mirror based test cutting heads. Phase 3: Test and evaluation of the cutting heads on high power CO2 laser sources in the 6-12 kW power range. The test phase concentrates on cutting steels, applied in the heavy industry. In the first part of the project fundamental studies have......This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial...... gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...

  20. FINAL/ SCIENTIFIC TECHNICAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, Henry; Singh, Suminderpal

    2006-08-28

    The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

  1. INOPS Technical Report

    DEFF Research Database (Denmark)

    Lindholst, Andrej Christian

    This research report contains background analyses and findings from the INOPS research project. The purpose of the INOPS project was, from an international perspective, to describe, analyse and recommend different forms of contracting out and public–private co-operations within the technical area...... in municipalities, including a focus on innovation and how to involve contractors ‘optimally’. The INOPS project should investigate the background for and implementation of various forms of contracting out and public–private co-operation based on experiences with contracting out in the roads and parks area...... in Denmark, Sweden, Norway and England. The research report addresses three key research questions in a comparative perspective: 1. Why are park and road maintenance services contracted out? 2. How are park and road maintenance services contracted out? 3. What are the outcomes from contracting out park...

  2. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Eggeman, Tim [ZeaChem Inc., Lakewood, CO (United States); O' Neill, Brian [ZeaChem Inc., Lakewood, CO (United States)

    2016-08-17

    ZeaChem Inc. and US DOE successfully demonstrated the ZeaChem process for producing sugars and ethanol from high-impact biomass feedstocks. The project was executed over a 5-year period under a $31.25 million cooperative agreement (80:20 Federal:ZeaChem cost share). The project was managed by dividing it into three budget periods. Activities during Budget Period 1 were limited to planning, permitting, and other pre-construction planning. Budget Period 2 activities included engineering, procurement, construction, commissioning, start-up and initial operations through the Independent Engineer Test Runs. The scope of construction was limited to the Chem Frac and Hydrogenolysis units, as the Core Facility was already in place. Construction was complete in December 2012, and the first cellulosic ethanol was produced in February 2013. Additional operational test runs were conducted during Budget Period 3 (completed June 2015) using hybrid poplar, corn stover, and wheat straw feedstocks, resulting in the production of cellulosic ethanol and various other biorefinery intermediates. The research adds to the understanding of the Chem Frac and Hydrogenolysis technologies in that the technical performance of each unit was measured, and the resulting data and operational experience can be used as the basis for engineering designs, thus mitigating risks for deployment in future commercial facilities. The Chem Frac unit was initially designed to be operated as two-stage dilute acid hydrolysis, with first stage conditions selected to remove the hemicellulose fraction of the feedstock, and the second stage conditions selected to remove the cellulose fraction. While the Chem Frac unit met or exceeded the design capacity of 10 ton(dry)/day, the technical effectiveness of the Chem Frac unit was below expectations in its initial two-stage dilute acid configuration. The sugars yields were low, the sugars were dilute, and the sugars had poor fermentability caused by excessive inhibitors

  3. Yucca Mountain Site Characterization Project technical data catalog: Quarterly supplement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where the data may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed-in accordance with the requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and distributed in the month following the end of each quarter. A complete revision to the catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to previously published reference information. The Technical Data Catalog, dated September 30, 1994, should be retained as the baseline document for the supplements until the end-of-year revision is published and distributed in October 1995.

  4. Yucca Mountain Site Characterization Project technical data catalog quarterly supplement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-31

    The Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where the data may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed in accordance with t requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and distributed in the month following the end of each quarter. A complete revision to the catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to@ previously published reference information. The Technical Data Catalog, dated September 30, 1994, should be retained as the baseline document for the supplements until the end-of-year revision is published and distributed in October 1995.

  5. Concurrent sourcing and external supplier opportunism

    DEFF Research Database (Denmark)

    Mols, Niels Peter

    When a firm simultaneously makes and buys the same components then the firm uses concurrent sourcing. This paper presents an agency model for explaining how and when concurrent sourcing reduces the likelihood of external supplier opportunism. In the proposed model, the external supplier’s expected...... costs of opportunism are determined as a product of four factors. The four factors are: likelihood of discovering supplier opportunism, buyer’s internalized quantity as reaction to supplier opportunism, asset specificity of external supplier’s investments, and multiplicator effects. Each...

  6. Environment and externalization; Environnement et externalisation

    Energy Technology Data Exchange (ETDEWEB)

    Kremlis, G.; Renaud, R. [Association francaise des ingenieurs et techniciens de l' environnement, AFITE, 75 - Paris (France); Touron, M. [Veritas, 75 - Paris (France)] [and others

    2001-07-01

    This document presents the discussions of the 16 may 2000, concerning the externalization and the environment and proposes to answer the following questions: is the externalization a new strategy to better perceive, hopeful engineering department, the technological risks problems, the environment or the land pollution? Does the externalization allow a better organization of the enterprise? To analyse the situation, the document presents the white book of the environmental liability, the administration point of view, some enterprises examples and the importance of the environmental management. (A.L.B.)

  7. Leiomyosarcoma of the external iliac vein.

    Science.gov (United States)

    Fukuda, Wakako; Taniguchi, Satoshi; Fukuda, Ikuo

    2012-06-01

    Leiomyosarcoma of the iliac vein is an uncommon tumor. We report a case of a 63-year-old Japanese woman with leiomyosarcoma of the right external iliac vein. The patient complained of right inguinal pain and swelling. Computed tomography demonstrated a mass surrounding the right external iliac artery and vein. Metastases in the lungs and liver were found. Complete resection of the tumor along with the involved vessels was performed. Polytetrafluoroethylene grafts were used to reconstruct the vessels. Pathological examination revealed leiomyosarcoma of the external iliac vein. Although the prognosis of leiomyosarcoma is poor, en bloc tumor resection is the treatment of choice.

  8. The sustainability of Serbia's external position: The impact of fiscal adjustment and external shocks

    Directory of Open Access Journals (Sweden)

    Zildžović Emir

    2015-01-01

    Full Text Available This paper studies the impact of fiscal policy and external shocks on the sustainability of Serbia’s external position. The key determinants of Serbia's current account balance are identified using model averaging techniques and are compared with estimates obtained for other small open economies (Poland, Georgia, Morocco, Ukraine, and Estonia. The paper uses estimated influences of macrovariables on the current account balance to generate a rich set of possible outcomes for the external position of the country. The results suggest the importance of fiscal policy for the reduction of external imbalances in all countries in our sample. In particular, credible and sustained fiscal adjustment can reduce current account deficit and stabilize Serbia’s external position close to its current level over the medium term. The analysis also warns that lack of success in fiscal consolidation coupled with external shocks may easily push the external position onto an unsustainable path.

  9. THE SUPPORTING OF EXPLOITATION AND MAINTENANCE MANAGEMENT WITHIN NETWORKED TECHNICAL SYSTEMS

    Directory of Open Access Journals (Sweden)

    Marcin DĄBROWSKI

    2015-04-01

    Full Text Available Network technical systems are complex systems, which include distribution networks with devices and engineering objects supporting their work. These kind of systems are used for media distribution, such as: drinking water, fuel, gas, heat, etc. One of specific features of this system is large territorial dispersion of technical objects within the system. The exploitation specificity of networked technical systems requires a special approach for implementing maintenance and repair work, taking into account the large territorial dispersion of their components and limited access to technical infra-structure. The features pointed above show the difference between networked technical system and the typical industri-al technical objects (e.g. available in manufacturing plants. This difference also requires the use of specific IT tools for maintenance management. This article discusses examples of selected tools in this class.

  10. Pulse properties of external cavity mode locked semiconductor lasers

    DEFF Research Database (Denmark)

    Mulet, Josep; Kroh, Marcel; Mørk, Jesper

    2006-01-01

    The performance of an external-cavity mode-locked semiconductor laser is investigated both theoretically and experimentally. The optimization analysis focuses on the regimes of stable mode locking and the generation of sub-picosecond optical pulses. We demonstrate stable output pulses down to one...... picosecond duration with more than 30 dB trailing pulse suppression. The limiting factors to the device performance are investigated on the basis of a fully-distributed time-domain model.We find that ultrafast gain dynamics effectively reduce the pulse-shaping strength and inhibit the generation...

  11. Logic and Abduction: Cognitive Externalizations in Demonstrative Environments

    Directory of Open Access Journals (Sweden)

    Lorenzo Magnani

    2009-12-01

    Full Text Available In her book Abductive Reasoning Atocha Aliseda (2006 stresses the attention to the logical models of abduction, centering on the semantic tableaux as a method for extending and improving both the whole cognitive/philosophical view on it and on other more restricted logical approaches. I will describe the importance of increasing logical knowledge on abduction also taking advantage of some ideas coming from the so-called distributed cognition where logical models are seen as forms of cognitive externalizations of preexistent in-formal human reasoning performances

  12. Hanford Site technical baseline database

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E.

    1996-09-30

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of September 30, 1996. The cassette tape also includes the delta files that dellinate the differences between this revision and revision 4 (May 10, 1996) of the Hanford Site Technical Baseline Database.

  13. Hanford Site technical baseline database

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E., Westinghouse Hanford

    1996-05-10

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of May 10, 1996. The cassette tape also includes the delta files that delineate the differences between this revision and revision 3 (April 10, 1996) of the Hanford Site Technical Baseline Database.

  14. Grid Interaction Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The mission of the Grid Interaction Technical Team (GITT) is to support a transition scenario to large scale grid-connected vehicle charging with transformational technology, proof of concept and information dissemination. The GITT facilitates technical coordination and collaboration between vehicle-grid connectivity and communication activities among U.S. DRIVE government and industry partners.

  15. Technical Documentation and Legal Liability.

    Science.gov (United States)

    Caher, John M.

    1995-01-01

    States that litigation over the interpretation and sufficiency of technical documentation is increasingly common as a number of suits have been filed in state and federal courts. Describes the case of "Martin versus Hacker," a recent case in which New York's highest court analyzed a technical writer's prose in the context of a lawsuit…

  16. EDI and the Technical Communicator.

    Science.gov (United States)

    Eiler, Mary Ann

    1994-01-01

    Assesses the role of technical communicators in electronic data interchange (EDI). Argues that, as experts in information design, human factors, instructional theory, and professional writing, technical communicators should be advocates of standard documentation protocols and should rethink the traditional concepts of "document" to…

  17. Machinic Deconstruction : literature/ politics/ technics

    NARCIS (Netherlands)

    Ieven, Bram Koen

    2007-01-01

    Taking its cue from Jacques Derrida’s concept of différance, Machinic Deconstruction: Literature / Politics / Technics addresses the question whether it is possible to conceive of a work of technics that is operative at the same quasi-ontological level as différance itself. To do so, this study deve

  18. COMPASS Accelerator Design Technical Overview

    Energy Technology Data Exchange (ETDEWEB)

    Nanni, Emilio; Dolgashev, Valery; Tantawi, Sami; Neilson, Jeff; /SLAC

    2016-03-14

    This report is a survey of technical options for generating a MeV-class accelerator for space based science applications. The survey was performed focusing on the primary technical requirements of the accelerator in the context of a satellite environment with its unique challenges of limited electrical power (PE), thermal isolation, dimensions, payload requirement and electrical isolation.

  19. Sophistic Ethics in the Technical Writing Classroom: Teaching "Nomos," Deliberation, and Action.

    Science.gov (United States)

    Scott, J. Blake

    1995-01-01

    Claims that teaching ethics is particularly important to technical writing. Outlines a classical, sophistic approach to ethics based on the theories and pedagogies of Protagoras, Gorgias, and Isocrates, which emphasizes the Greek concept of "nomos," internal and external deliberation, and responsible action. Discusses problems and…

  20. Externality, environment, and obesity in children.

    Science.gov (United States)

    Stager, S F

    1981-07-01

    On the assumption that external responsiveness and environmental characteristics jointly determine whether a child will achieve an excessive weight gain, perpetuating and maintaining obesity, probability hierarchy was hypothesized and tested. Ss of the study were 24 obese and 24 average-weight, white boys, mean age 9 years, 5 months. An auditory distraction task and Kagan's Matching Familiar Figures Test were used to measure auditory and visual responsivity to external cues, respectively. Socioeconomic status was used as an indicator of the childhood environment. As predicted, the greatest percentages of obese children were observed in the lower-socioeconomic, external group, followed by the lower-socioeconomic, internal group and middle-socioeconomic, external group. The smallest percentage of obese children was observed in the middle-socioeconomic, internal group.

  1. Sleep disturbances in chronic progressive external ophthalmoplegia.

    NARCIS (Netherlands)

    Smits, B.W.; Westeneng, H.J.; Hal, M.A. van; Engelen, B.G.M. van; Overeem, S.

    2012-01-01

    BACKGROUND: Chronic progressive external ophthalmoplegia (CPEO) is a relatively common mitochondrial disorder. In addition to extraocular muscle weakness, various other organs can typically be affected, including laryngeal and limb muscles, cerebrum, cerebellum, and peripheral nerves. Given this mul

  2. Proceedings: National conference on environmental externalities

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    This report is the proceedings of the National Conference on Environmental Externalities. A environmental externality is the environmental impact of a process or a plant that society must endure. It is a social cost and is paid, but not by the company who produced it or the company`s customers who endure it. The main purpose of this report is to gather the many designs and ideas of how and why to internalize the externalities into the pricing systems of the public utility commissions, especially that of the electric utilities. Economic and sociological aspects of the internalization of these externalities are given in these proceedings. Individual papers are processed separately for databases. (MB)

  3. Owl Mountain Partnership : An external assessment

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — External review of the Owl Mountain Partnership (OMP) to identify benefits and successes associatedwith collaborative work through the perceptions of participating...

  4. Infrared limit in external field scattering

    CERN Document Server

    Herdegen, Andrzej

    2012-01-01

    Scattering of electrons/positrons by external classical electromagnetic wave packet is considered in infrared limit. In this limit the scattering operator exists and produces physical effects, although the scattering cross-section is trivial.

  5. reoperation rates following intramedullary nailing versus external ...

    African Journals Online (AJOL)

    Reasons for reoperation among EF patients were infection. (2 patients) ... fixation. Keywords: Orthopaedic surgery, Tanzania, Intramedullary nail, External fixation, Open tibia fracture. INTRODUCTION ..... of surgical site infection. Infect Control ...

  6. Modern Methods of Multidimensional Data Visualization: Analysis, Classification, Implementation, and Applications in Technical Systems

    Directory of Open Access Journals (Sweden)

    I. K. Romanova

    2016-01-01

    Full Text Available The article deals with theoretical and practical aspects of solving the problem of visualization of multidimensional data as an effective means of multivariate analysis of systems. Several classifications are proposed for visualization techniques, according to data types, visualization objects, the method of transformation of coordinates and data. To represent classification are used charts with links to the relevant work. The article also proposes two classifications of modern trends in display technology, including integration of visualization techniques as one of the modern trends of development, along with the introduction of interactive technologies and the dynamics of development processes. It describes some approaches to the visualization problem, which are concerned with fulfilling the needs. The needs are generated by the relevant tasks such as information retrieval in global networks, development of bioinformatics, study and control of business processes, development of regions, etc. The article highlights modern visualization tools, which are capable of improving the efficiency of the multivariate analysis and searching for solutions in multi-objective optimization of technical systems, but are not very actively used for such studies. These are horizontal graphs, graphics "quantile-quantile", etc. The paper proposes to use Choropleth cards traditionally used in cartography for simultaneous presentation of the distribution parameters of several criteria in the space. It notes that visualizations of graphs in network applications can be more actively used to describe the control system. The article suggests using the heat maps to provide graphical representation of the sensitivity of the system quality criteria under variations of options (multivariate analysis of technical systems. It also mentions that it is useful to extend the supervising heat maps to the task of estimating quality of identify in constructing system models. A

  7. Technical planning activity: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  8. Protection of Distribution Systems with Distributed Energy Resources

    DEFF Research Database (Denmark)

    Bak-Jensen, Birgitte; Browne, Matthew; Calone, Roberto

    of 17 months of work of the Joint Working Group B5/C6.26/CIRED “Protection of Distribution Systems with Distributed Energy Resources”. The working group used the CIGRE report TB421 “The impact of Renewable Energy Sources and Distributed Generation on Substation Protection and Automation”, published...... concepts and future trends accordingly. The report is structured as follows: After this preface (chapter 1), the scope of the technical brochure according to the Terms of Reference (TOR) is stated (chapter 2). Then, in the glossary, symbols and abbreviations used throughout the technical brochure...... are listed (chapter 3). The first main part of the report starts with a summary of the backgrounds on DER and current practices in protection at the distribution level (chapter 4). This chapter contains an analysis of CIGRE TB421, protection relevant characteristics of DER, a review of current practices...

  9. Consumption Externalities, Rental Markets and Purchase Clubs.

    OpenAIRE

    Suzanne Scotchmer

    2002-01-01

    A premise of general equilibrium theory is that private goods are rival. Nevertheless, many private goods are shared, e.g., through barter, through co-ownership, or simply because one person’s consumption affects another person’s wellbeing. We analyze consumption externalities from the perspective of club theory, and argue that, provided consumption externalities are limited in scope, they can be internalized through membership fees to groups. Our main applications are to rental markets and “...

  10. Operating protocols of external root cervical resorption

    OpenAIRE

    Luca Venuti

    2015-01-01

    Aim: Theme of this report is the external cervical root resorption and the sequence of clinical procedures to be implemented during the phases of treatment. The external cervical root resorption (ICR) presents particular pathological conditions such as to classify between resorption of inflammatory origin.1–3 It is generally presented as a complex clinical situation both in the diagnosis in a predictable prognosis.3–6 It's often associated with loss of calcified tissue: dentin, cementum, a...

  11. Inferential knowledge, externalism and self-knowledge.

    OpenAIRE

    R G Ford

    2004-01-01

    Privileged self-knowledge says, roughly, that we have non-empirical knowledge of our own thoughts. Externalism about mental content says, roughly, that our mental states are determined at least in part by our environment. It has been alleged that jointly assuming externalism about mental content and privileged self-knowledge are true has the consequence that any subject can have non-empirical knowledge of her own environment and this is intuitively absurd. The thesis investigates in various w...

  12. Operating protocols of external root cervical resorption

    OpenAIRE

    Venuti, Luca

    2015-01-01

    Aim: Theme of this report is the external cervical root resorption and the sequence of clinical procedures to be implemented during the phases of treatment. The external cervical root resorption (ICR) presents particular pathological conditions such as to classify between resorption of inflammatory origin.1–3 It is generally presented as a complex clinical situation both in the diagnosis in a predictable prognosis.3–6 It's often associated with loss of calcified tissue: dentin, cementum, a...

  13. Integrating Building Functions into Massive External Walls

    Directory of Open Access Journals (Sweden)

    Ahmed Hisham Hafez

    2016-05-01

    Full Text Available Well into the twentieth century, brick and stone were the materials used. Bricklaying and stonemasonry were the construction technologies employed for the exterior walls of virtually all major structures. However, with the rise in quality of life, the massive walls alone became incapable of fulfilling all the developed needs. Adjacent systems and layers had then to be attached to the massive layer. Nowadays, the external wall is usually composed of a layered construction. Each external wall function is usually represented by a separate layer or system. The massive layer of the wall is usually responsible for the load-bearing function.Traditional massive external walls vary in terms of their external appearance, their composition and attached layers. However, their design and construction process is usually a repeated process. It is a linear process where each discipline is concerned with a separate layer or system. These disciplines usually take their tasks away and bring them back to be re-integrated in a layered manner. New massive technologies with additional function have recently become available.Such technologies can provide the external wall with other functions in addition to its load-bearing function. The purpose of this research is to map the changes required to the traditional design and construction process when massive technologies with additional function are applied in external walls. Moreover, the research aims at assessing the performance of massive solutions with additional function when compared to traditional solutions in two different contexts, the Netherlands and Egypt.Through the analysis of different additional function technologies in external walls, a guidance scheme for different stakeholders is generated. It shows the expected process changes as related to the product level and customization level. Moreover, the research concludes that the performance of additional insulating technologies, and specifically Autoclaved

  14. External Prestressing Bridge Reinforcement Technology Review

    Directory of Open Access Journals (Sweden)

    Zhu Hanbing

    2015-01-01

    Full Text Available Externally prestressed bridge can not only limit and reduce the cracks and deformation of the structure, improve the rigidity and bearing capacity of structure, improve the stress state of structure, but also have less interference for bridge operation when it is operating and have the good economic efficiency. This paper introduces the advantages and disadvantages of external prestressed strengthening technique, its calculation theory and construction technology described in detail, and finally the paper discusses the deficiency of existing research.

  15. Nuclear waste storage and environmental intergenerational externalities

    OpenAIRE

    Fodha, Mouez

    2015-01-01

    International audience; This article analyzes the long-term consequences of nuclear waste storage within a general equilibrium framework. The objective is to determine the conditions for which the storage of waste, and thus the transfer of externalities towards the future, can be optimal. These conditions could explain the implementation of intergenerational externalities, justifying an intertemporal Not In My Back Yard behaviour. We first show that the choice of the policy instruments determ...

  16. Characterization of the distributed generation of electricity by grid-connected photovoltaic systems in Brazil, with respect to technical, economic and regulatory aspects; Caracterizacao da geracao distribuida de eletricidade por meio de sistemas fotovoltaicos conectados a rede, no Brasil, sob os aspectos tecnico, economico e regulatorio

    Energy Technology Data Exchange (ETDEWEB)

    Benedito, Ricardo da Silva

    2009-07-01

    This work characterizes the distributed generation of electricity from Grid-Connected Photovoltaic Systems (GCPS) in Brazil, according to technical, economic and regulatory aspects. The country currently has 35 GCPS in operation, totaling an installed power of 161.32 kW{sub p}. Most of this power is in the South and Southeast and has been implemented by universities, research centers and electric power utilities, with a small participation of private initiative. The solar energy generation cost from GCPS was calculated for sixteen strategically selected localities. This value varies according to the greater or minor availability of the solar resource and the adopted discounting rate. The average value found was 0.56 US$ /kWh, about 2,1 times bigger than the average residential tariff in the same cities. Arguing that the conventional tariff tends to grow in coming years, pressed by the imbalance between supply and demand, and that the cost of photovoltaic generation tends to decrease over the same period due to productivity gains in the manufacturing process of photovoltaic components, a mathematical model was developed to predict the time that these two indicators will be equal. It was found that the average time of equalization will be 7.0 years and may be less than 5.0 years in locations where the conventional energy is more expensive than the national average and average annual irradiation is higher than that in the rest of the country. Finally, this work presents how the Brazilian legislation deals with the photovoltaic generators connected to the public distribution network, showing the points for and legal obstacles to the dissemination of GCPS. (author)

  17. Laser ablation of titanium in liquid in external electric field

    Energy Technology Data Exchange (ETDEWEB)

    Serkov, A.A. [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); The Federal State Educational Institution of Higher Professional Education, “Moscow Institute of Physics and Technology (State University)”, 9 Institutskiy per., 141700, Dolgoprudny, Moscow Region (Russian Federation); Barmina, E.V., E-mail: barminaev@gmail.com [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); Shafeev, G.A. [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), 31, Kashirskoye Highway, 115409 Moscow (Russian Federation); Voronov, V.V. [A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation)

    2015-09-01

    Highlights: • Ablation of a bulk Ti target by 10 ps laser pulses in liquid is experimentally studied in external DC electric field. • Applied cathodic bias leads to increase in average size of self-organized nanostructures formed upon ablation of titanium target. • Laser ablation of Ti target in external electric field results in generation of elongated titanium oxide nanoparticles. - Abstract: Ablation of a bulk Ti target by 10 ps laser pulses in water is experimentally studied in external DC electric field. It is demonstrated that both lateral size of nanostructures (NS) on Ti surface and their density depend on the electric field applied to the target. Scanning Electron Microscopy of NS reveals the shift of their size distribution function toward larger sizes with applied field (cathodic bias, 25 V DC). Density of mushroom-like NS with applied electric field amounts to 10{sup 10} cm{sup −2}. X-ray diffraction of generated nanoparticles (NPs) shows difference in the crystallographic structure of NPs of non-stoichiometric Ti oxides generated with and without electric field. This conclusion is corroborated with the optical absorption spectroscopy of obtained colloids. Transmission Electron Microscopy of NPs also shows difference in morphology of particles produced with and without cathodic bias. The results are interpreted on the basis of instability of the melt on Ti surface in the electric field.

  18. Technical Support Working Group

    Science.gov (United States)

    2009-01-02

    Office of Emergency Preparedness Department of Veterans Affairs Department of Interior US Bureau of Reclamation Other Intelligence Comunity ...Technician Course < WMD Virtual University Deliver accredited WMD response training via satellite and terrestrial distance learning networks to DOD, other...Distributed Learning Network (ADLNET) Sharable Content Object Reference Model (SCORM) standards. WMD-PIE Version 1.0 in final production. Initial

  19. Trial for Enhancing Technical Writing Skills to Improve Training Efficiency in Writing Technical Papers

    Science.gov (United States)

    Uneda, Michio; Ishikawa, Ken-Ichi

    One of the important undertakings of student in laboratory education practiced in higher educational institutions, such as universities, is the development of technical communication skills based on training in technical writing for preparing not only bachelor‧s and master‧s theses but also papers to be submitted to society journals. However, technical writing is difficult for students who are not trained in writing papers, and it might become a burden for the teaching staff. Considering this situation, we have examined methods that may enhance the technical writing skills of students and also improve the training efficiency of the teaching staff. Specifically, the methods include distributing checklists to students, providing as few corrections as possible using underlines and adding comments when correcting students‧ writings, and instructing students to exchange their writings to check each other‧s work. In this paper, we summarize and analyze the effects of practicing the above methods on the basis of the answers to a questionnaire provided by students.

  20. 7 CFR 1469.9 - Technical assistance.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Technical assistance. 1469.9 Section 1469.9... Provisions § 1469.9 Technical assistance. (a) NRCS may use the services of NRCS-approved or certified Technical Service Providers in performing its responsibilities for technical assistance. (b) Technical...