WorldWideScience

Sample records for external hard shell

  1. failure analysis and shock protection of external hard disk drive

    African Journals Online (AJOL)

    user

    Technology for processing and storage of data in portable external storage hard disks has ... system was used to simulate the impact of stress on the structure of the hard disk before and ... highlighted [1] that mechanical vibration and shock.

  2. Comparative study of the shell development of hard- and soft-shelled turtles.

    Science.gov (United States)

    Nagashima, Hiroshi; Shibata, Masahiro; Taniguchi, Mari; Ueno, Shintaro; Kamezaki, Naoki; Sato, Noboru

    2014-07-01

    The turtle shell provides a fascinating model for the investigation of the evolutionary modifications of developmental mechanisms. Different conclusions have been put forth for its development, and it is suggested that one of the causes of the disagreement could be the differences in the species of the turtles used - the differences between hard-shelled turtles and soft-shelled turtles. To elucidate the cause of the difference, we compared the turtle shell development in the two groups of turtle. In the dorsal shell development, these two turtle groups shared the gene expression profile that is required for formation, and shared similar spatial organization of the anatomical elements during development. Thus, both turtles formed the dorsal shell through a folding of the lateral body wall, and the Wnt signaling pathway appears to have been involved in the development. The ventral portion of the shell, on the other hand, contains massive dermal bones. Although expression of HNK-1 epitope has suggested that the trunk neural crest contributed to the dermal bones in the hard-shelled turtles, it was not expressed in the initial anlage of the skeletons in either of the types of turtle. Hence, no evidence was found that would support a neural crest origin. © 2014 Anatomical Society.

  3. Development of Mortar Simulator with Shell-In-Shell System – Problem of External Ballistics

    Directory of Open Access Journals (Sweden)

    A. Fedaravicius

    2007-01-01

    Full Text Available The shell-in-shell system used in the mortar simulator raises a number of non-standard technical and computational problems starting from the requirement to distribute the propelling blast energy between the warhead and the ballistic barrel, finishing with the requirement that the length of warhead's flight path must be scaled to combat shell firing tables. The design problem of the simulator is split into two parts – the problem of external ballistics where the initial velocities of the warhead must be determined, and the problem of internal ballistics – where the design of the cartridge and the ballistic barrel must be performed.

  4. Driven self-assembly of hard nanoplates on soft elastic shells

    Institute of Scientific and Technical Information of China (English)

    章尧旸; 华昀峰; 邓真渝

    2015-01-01

    The driven self-assembly behaviors of hard nanoplates on soft elastic shells are investigated by using molecular dynamics (MD) simulation method, and the driven self-assembly structures of adsorbed hard nanoplates depend on the shape of hard nanoplates and the bending energy of soft elastic shells. Three main structures for adsorbed hard nanoplates, including the ordered aggregation structures of hard nanoplates for elastic shells with a moderate bending energy, the collapsed structures for elastic shells with a low bending energy, and the disordered aggregation structures for hard shells, are observed. The self-assembly process of adsorbed hard nanoplates is driven by the surface tension of the elastic shell, and the shape of driven self-assembly structures is determined on the basis of the minimization of the second moment of mass distribution. Meanwhile, the deformations of elastic shells can be controlled by the number of adsorbed rods as well as the length of adsorbed rods. This investigation can help us understand the complexity of the driven self-assembly of hard nanoplates on elastic shells.

  5. Microstructural Characterization and Hardness Behavior of a Biological Saxidomus purpuratus Shell

    Institute of Scientific and Technical Information of China (English)

    Wen Yang; Guangping Zhang; Huasai Liu; Xiaowu Li

    2011-01-01

    The microstructures of the Saxidorus purpuratus shell were observed. It was found that the inner and middle layers of the shell are composed of crossed lamellae, while the outer layer exhibits porous structures. With the characteristic structure of each layer, the hardness of inner layer with narrow domains in crossed lamellar structure is the highest, and that of middle layer with wide domains is lower, while the outer layer has the lowest hardness. The damage morphologies of the indentations change a lot, depending not only upon the magnitude of the indentation load, but also upon the orientation between the indentation direction and the crossed lamellae in the microstructure of the shell, which illustrates the anisotropy in mechanical properties of such shells.

  6. Stability of cylindrical shells with initial imperfections under the action of external pressure

    Science.gov (United States)

    Lopanitsyn, E. A.; Matveev, E. A.

    2011-04-01

    We use the equations of nonlinear theory of shallow shells to solve the problem of stability of thin elastic isotropic cylindrical shells, with small initial shape imperfections, that are under the action of external uniform pressure. The problem solution is constructed by the Rayleigh-Ritz method with the approximation of the shell midsurface displacement by double functional sums in trigonometric and beam functions. The system of nonlinear algebraic equations is solved by using the methods of continuation with respect to a close-to-best parameter. For the initial imperfections of the shells, we use their normalized deflections from the limit points of overcritical branches of the loading trajectories. We consider various cases of the shell fixation and support under loading by lateral and hydrostatic uniform pressure. We also construct the range of values of the critical pressure, which, with the maximal deviation of the shell shape from the cylindrical shape up to 30%, covers practically all known experimental data.

  7. Yolk/Shell Colloidal Crystals Incorporating Movable Cores with Their Motion Controlled by an External Electric Field

    NARCIS (Netherlands)

    K., Watanabe,; H., Ishii,; Konno, M.; Imhof, A.; van Blaaderen, A.; Nagao, D.

    2016-01-01

    Yolk/shell particles composed of a submicrometer-sized movable core and a silica shell are promising building blocks for novel optical colloidal crystals, because the locations of cores in the shell compartment can be reversibly changed by using external stimuli. Two dimensional arrays of yolk/shell

  8. Analytical solution for cylindrical thin shells with normally intersecting nozzles due to external moments on the ends of shells

    Institute of Scientific and Technical Information of China (English)

    薛明德; 王和慧; 陈伟; 黄克智

    1999-01-01

    The stress analysis based on the theory of a thin shell is carried out for cylindrical shells with normally intersecting nozzles subjected to external moment loads on the ends of shells with a large diameter ratio (ρ0≤0.8). Instead of the Donnell shallow shell equation, the modified Morley equation, which is applicable to ρ0 (R/T)1/2(?)1, is used for the analysis of the shell with cutout. The solution in terms of displacement function for the nozzle with a nonplanar end is based on the Goldenveizer equation. The boundary forces and displacements at the intersection are all transformed from Gaussian coordinates (α, β) on the shell, or Gaussian coordinates (ζ, θ) on the nozzle into three-dimensional cylindrical coordinates (ρ, θ, z). Their expressions on the intersecting curve are periodic functions of θ and expanded in Fourier series. Every harmonic of Fourier coefficients of boundary forces and displacements are obtained by numerical quadrature. The results obtained are in agreement with

  9. The lifetime of a long cylindrical shell under external pressure at elevated temperature

    CERN Document Server

    Bargmann, H W

    1972-01-01

    This paper is concerned with creep collapse of a long, thin walled, circular, cylindrical shell subjected to external pressure. The problem has been studied by Hoff et al. (1959), where elasticity has been neglected in the material equations. In the present paper it is pointed out that elasticity must not be neglected in stability problems as it may reduce the lifetime considerably. The improved equation for the lifetime of the shell is presented. Moreover, a procedure is indicated to derive the necessary creep parameters easily from usually available creep data. Numerical values of the lifetime of thin-walled, circular, cylindrical shells under external atmospheric pressure are presented for a wide range of shells of different geometrical characteristics for a number of high-temperature alloys and the temperature range up to 1000 degrees C. Experimental results are reported which are in good agreement with the theoretical prediction. (11 refs).

  10. Control of Compact-Toroid Characteristics by External Copper Shell

    Science.gov (United States)

    Matsumoto, T.; Sekiguchi, J.; Asai, T.; Gota, H.; Roche, T.; Allfrey, I.; Cordero, M.; Garate, E.; Kinley, J.; Valentine, T.; Waggoner, W.; the TAE Team

    2015-11-01

    A collaborative research project by Tri Alpha Energy and Nihon University has been conducted for several years, which led to the development of a new compact toroid (CT) injector for efficient FRC particle refueling in the C-2U experiment. The CT is formed by a magnetized coaxial plasma gun (MCPG), consisting of coaxial cylindrical electrodes. In CT formation via MCPG, the magnetic helicity content of the generated CT is one of the critical parameters. A bias coil is inserted into the inner electrode to generate a poloidal flux. The resultant bias magnetic field is spread out of MCPG with time due to its low-frequency bias current. To obtain a more effectively distributed bias magnetic field as well as to improve the voltage breakdown between electrodes, the MCPG incorporates a novel ~ 1 mm thick copper shell mounted outside of the outer electrode. This allows for reliable and controlled operation and more robust CT generation. A detailed discussion of the copper shell and experimental test results will be presented.

  11. Transcriptome response to copper heavy metal stress in hard-shelled mussel (Mytilus coruscus).

    Science.gov (United States)

    Xu, Meiying; Jiang, Lihua; Shen, Kang-Ning; Wu, Changwen; He, Guangyuan; Hsiao, Chung-Der

    2016-03-01

    The hard-shelled mussel (Mytilus coruscus) has considerably one of the most economically important marine shellfish worldwide and considered as a good invertebrate model for ecotoxicity study for a long time. In the present study, we used Illumina sequencing technology (HiSeq2000) to sequence, assemble and annotate the transcriptome of the hard-shelled mussel which challenged with copper pollution. A total of 21,723,913 paired-end clean reads (NCBI SRA database SRX1411195) were generated from HiSeq2000 sequencer and 96,403 contigs (with N50 = 1118 bp) were obtained after de novo assembling with Trinity software. Digital gene expression analysis reveals 1156 unigenes are upregulated and 1681 unigenes are downregulated when challenged with copper. By KEGG pathway enrichment analysis, we found that unigenes in four KEGG pathways (aminoacyl-tRNA biosynthesis, apoptosis, DNA replication and mismatch repair) show significant differential expressed between control and copper treated groups. We hope that the gill transcriptome in copper treated hard-shelled mussel can give useful information to understand how mussel handles with heavy metal stress at molecular level.

  12. Transcriptome response to copper heavy metal stress in hard-shelled mussel (Mytilus coruscus

    Directory of Open Access Journals (Sweden)

    Meiying Xu

    2016-03-01

    Full Text Available The hard-shelled mussel (Mytilus coruscus has considerably one of the most economically important marine shellfish worldwide and considered as a good invertebrate model for ecotoxicity study for a long time. In the present study, we used Illumina sequencing technology (HiSeq2000 to sequence, assemble and annotate the transcriptome of the hard-shelled mussel which challenged with copper pollution. A total of 21,723,913 paired-end clean reads (NCBI SRA database SRX1411195 were generated from HiSeq2000 sequencer and 96,403 contigs (with N50 = 1118 bp were obtained after de novo assembling with Trinity software. Digital gene expression analysis reveals 1156 unigenes are upregulated and 1681 unigenes are downregulated when challenged with copper. By KEGG pathway enrichment analysis, we found that unigenes in four KEGG pathways (aminoacyl-tRNA biosynthesis, apoptosis, DNA replication and mismatch repair show significant differential expressed between control and copper treated groups. We hope that the gill transcriptome in copper treated hard-shelled mussel can give useful information to understand how mussel handles with heavy metal stress at molecular level.

  13. Building nanocomposite magnets by coating a hard magnetic core with a soft magnetic shell.

    Science.gov (United States)

    Liu, Fei; Zhu, Jinghan; Yang, Wenlong; Dong, Yunhe; Hou, Yanglong; Zhang, Chenzhen; Yin, Han; Sun, Shouheng

    2014-02-17

    Controlling exchange coupling between hard magnetic and soft magnetic phases is the key to the fabrication of advanced magnets with tunable magnetism and high energy density. Using FePt as an example, control over the magnetism in exchange-coupled nanocomposites of hard magnetic face-centered tetragonal (fct) FePt and soft magnetic Co (or Ni, Fe2C) is shown. The dispersible hard magnetic fct-FePt nanoparticles are first prepared with their coercivity (Hc) reaching 33 kOe. Then core/shell fct-FePt/Co (or Ni, Fe2C) nanoparticles are synthesized by reductive thermal decomposition of the proper metal precursors in the presence of fct-FePt nanoparticles. These core/shell nanoparticles are strongly coupled by exchange interactions and their magnetic properties can be rationally tuned by the shell thickness of the soft phase. This work provides an ideal model system for the study of exchange coupling at the nanoscale, which will be essential for building superstrong magnets for various permanent magnet applications in the future.

  14. Stability characteristics of ring-stiffened cylindrical shells under different longitudinal and transverse external pressures

    Institute of Scientific and Technical Information of China (English)

    WANG Xiao-Tian; YAO Wen; LIANG Chao; JI Nan

    2007-01-01

    Because ring-stiffened cylindrical shell structures have many merits, they are widely used in many areas. However, as the strength of steel increase continuously, ensuring of the structure stability is becoming more and more important. Therefore, it is necessary to carry on a more particular analysis. Based on the understanding and analysis of the characteristics of stability for a ring-stiffened cylindrical shell under uniform external pressure and under external single pressure, the characteristics under different cross uniform external pressures are analyzed, and the regularity of it is also gotten. The curve of stability given various geometrical parameters under different cross uniform external pressures is protracted by the analysis of the theory. The conclusion not only improves the theory structural mechanics, it also was important effects on engineering calculation and design.

  15. First Principles Study of Si/Ge Core-Shell nanowires under external uniaxial strain

    CERN Document Server

    Peng, Xihong; Logan, Paul

    2010-01-01

    Density-functional theory based first principles calculations are performed to study the effects of external uniaxial strain on the electronic states of Si/Ge core-shell nanowires along the [110] direction with the diameter of the wire up to 5 nm. As shown in the calculations, the [110] Si/Ge core-shell nanowires without external strain possess a direct band gap, in contrast to the nature of an indirect band gap in bulk Si and Ge. The band structure of the core-shell nanowires can be significantly modulated by an external strain. With a sufficient amount of tensile uniaxial strain, the band gap of the Si/Ge core-shell nanowires experiences a transition from direct to indirect. In addition, our studies showed that the effective masses of charge carriers can be also tuned by the external uniaxial strain. The effective mass of the hole increases dramatically with a tensile strain, while strain shows a minimal effect on tuning the effective mass of the electron. Finally, the relationship between the strain effect...

  16. A survey of buckling of conical shells subjected to axial compression and external pressure

    Directory of Open Access Journals (Sweden)

    O. Ifayefunmi

    2014-07-01

    Full Text Available The paper reviews literature on buckling of conical shells subjected to three loading conditions: (i axial compression only, (ii external pressure only and (iii combined loading. The review is from the theoretical as well as experimental points of view. This review covers known experiments on cones from (1958 – 2012. The literature review is split thematically into the following categories: theoretical prediction of axially compressed cones, theoretical prediction of externally pressurized cones, theoretical prediction of cones under combined loading, buckling experiments on axially compressed cones, buckling experiments on externally pressurized cones, buckling experiments on cones subjected to combined loading, buckling experiments on composite conical shells, equivalent cylinder approach, effect of initial geometric imperfection on the buckling behaviour of cones and effect of imperfect boundary conditions on the buckling behaviour of cones.

  17. Diffusion of external magnetic fields into the cone-in-shell target in the fast ignition

    Science.gov (United States)

    Sunahara, Atsushi; Johzaki, Tomoyui; Nagatomo, Hideo; Sakata, Shouhei; Matsuo, Kazuki; Lee, Seungho; Fujioka, Shinsuke; Shiraga, Hiroyuki; Azechi, Hiroshi; Firex-Project Team

    2016-10-01

    We simulated the diffusion of externally applied magnetic fields into cone-in-shell target in the fast ignition. In this ignition scheme, the externally magnetic fields up to kilo-Tesla is used to guide fast electrons to the high-dense imploded core, and understanding diffusion of the magnetic field is one of the key issues for increasing the coupling efficiency from the heating laser to the imploded core. In order to study the magnetic field, we have developed 2D cylindrical Maxwell equation solver with Ohm's law, and carried out simulations of diffusion of externally applied magnetic fields into a cone-in-shell target. Also, we estimated the conductivity of the cone and shell target based on the assumption of Saha-ionization equilibrium. We present our results of diffusion of magnetic fields. We also show that the target is heated by the eddy current. Because of the density and temperature dependence of the conductivity, the magnetic fields diffuse into the material with varying conductivity. Consequently, the magnetic fields into the cone-in-shell target depend on the temporal profile of the magnetic fields as well as the electrical and thermal properties of the material.

  18. Controlled structuring of binary hard-disk mixtures via a periodic, external potential.

    Science.gov (United States)

    Franzrahe, K; Nielaba, P

    2009-05-01

    Ordering phenomena on surfaces or in monolayers can be successfully studied by model systems as binary hard-disk mixtures, the influence of a substrate being modeled by an external potential. For the field-free case the thermodynamic stability of space-filling lattice structures for binary hard-disk mixtures is studied by Monte Carlo computer simulations. As these structures prove to be thermodynamically stable only in high pressure environments, the phase behavior of an equimolar binary mixture with a diameter ratio of sigma_{B}/sigma_{A}=0.414 exposed to an external, one-dimensional, periodic potential is analyzed in detail. The underlying ordering mechanisms and the resulting order differ considerably, depending on which components of the mixture interact with the external potential. The simulations show that slight deviations in the concentration of large particles x_{A} or the diameter ratio sigma_{B}/sigma_{A} have no impact on the occurrence of the various field-induced phenomena as long as the mixture stays in the relevant regime of the packing fraction eta . Furthermore the importance of the commensurability of the external potential to the S1(AB) square lattice for the occurrence of the induced ordering is discussed.

  19. Biosorption of thorium on the external shell surface of bivalve mollusks: the role of shell surface microtopography.

    Science.gov (United States)

    Zuykov, Michael; Pelletier, Emilien; Saint-Louis, Richard; Checa, Antonio; Demers, Serge

    2012-02-01

    External shell surface (ESS) of bivalve mollusks is known to adsorb various metals dissolved in ambient water in high concentration. It is hypothesized here that the surface microtopography of the thin organic coating layer, periostracum, or calcareous shell (if periostracum was destroyed) plays a major role in the adsorption of actinides on ESS. Thorium (natural alpha-emitter) was used in short-term biosorption experiment with shell fragments of five bivalve mollusks. After a 72 h exposure to Th (~6 kBq L(-1)), thorium concentration was measured on ESS using laser ablation inductively coupled plasma mass spectrometry; the distribution and density of alpha tracks were subsequently visualized by α-track autoradiography. A trend in reduced Th concentrations on the ESS was observed depending upon the species tested: (group 1 ~4000 μg g(-1)) Chlamys islandica (M.), Mercenaria mercenaria (L.), Dreissena polymorpha (P.)>(group 2 ~1200 μg g(-1)) Crassostrea virginica (G.)≫(group 3 ~150 μg g(-1)) Mytilus edulis L. The microtopography of ESS was characterized by scanning electron microscopy revealing the high porosity of the calcareous surface of C. islandica and M. mercenaria, lamellate surface of periostracum in D. polymorpha, uneven but a weakly porous surface of periostracum of C. virginica, and a nearly smooth surface of the periostracum of M. edulis. This work has demonstrated, for the first time, the presence of a strong correlation between concentration of adsorbed Th and ESS microtopography, and the role of the periostracum in this process is discussed.

  20. Environmental salinity modulates the effects of elevated CO2 levels on juvenile hard-shell clams, Mercenaria mercenaria.

    Science.gov (United States)

    Dickinson, Gary H; Matoo, Omera B; Tourek, Robert T; Sokolova, Inna M; Beniash, Elia

    2013-07-15

    Ocean acidification due to increasing atmospheric CO2 concentrations results in a decrease in seawater pH and shifts in the carbonate chemistry that can negatively affect marine organisms. Marine bivalves such as the hard-shell clam, Mercenaria mercenaria, serve as ecosystem engineers in estuaries and coastal zones of the western Atlantic and, as for many marine calcifiers, are sensitive to the impacts of ocean acidification. In estuaries, the effects of ocean acidification can be exacerbated by low buffering capacity of brackish waters, acidic inputs from freshwaters and land, and/or the negative effects of salinity on the physiology of organisms. We determined the interactive effects of 21 weeks of exposure to different levels of CO2 (~395, 800 and 1500 μatm corresponding to pH of 8.2, 8.1 and 7.7, respectively) and salinity (32 versus 16) on biomineralization, shell properties and energy metabolism of juvenile hard-shell clams. Low salinity had profound effects on survival, energy metabolism and biomineralization of hard-shell clams and modulated their responses to elevated PCO2. Negative effects of low salinity in juvenile clams were mostly due to the strongly elevated basal energy demand, indicating energy deficiency, that led to reduced growth, elevated mortality and impaired shell maintenance (evidenced by the extensive damage to the periostracum). The effects of elevated PCO2 on physiology and biomineralization of hard-shell clams were more complex. Elevated PCO2 (~800-1500 μatm) had no significant effects on standard metabolic rates (indicative of the basal energy demand), but affected growth and shell mechanical properties in juvenile clams. Moderate hypercapnia (~800 μatm PCO2) increased shell and tissue growth and reduced mortality of juvenile clams in high salinity exposures; however, these effects were abolished under the low salinity conditions or at high PCO2 (~1500 μatm). Mechanical properties of the shell (measured as microhardness and

  1. Shells of charge: a density functional theory for charged hard spheres.

    Science.gov (United States)

    Roth, Roland; Gillespie, Dirk

    2016-06-22

    A functional for the electrostatic excess free-energy for charged, hard sphere fluids is proposed. The functional is derived from two complementary, but equivalent, interpretations of the mean spherical approximation (MSA). The first combines fundamental measure theory (FMT) from hard-core interactions with the idea that MSA can be interpreted in terms of the interaction spherical shells of charge. This formulation gives the free-energy density as a function of weighted densities. When all the ions have the same size, the functional adopts an FMT-like form. The second in effect 'functionalizes' the derivation of MSA; that is, it generalizes the MSA as a functional-based version of MSA (fMSA). This formulation defines the free-energy density as a function of a position-dependent MSA screening parameter and the weighted densities of the FMT approach. This FMT/fMSA functional is shown to give accurate density profiles, as compared to Monte Carlo simulations, under a wide range of ion concentrations, size asymmetries, and valences.

  2. Shells of charge: a density functional theory for charged hard spheres

    Science.gov (United States)

    Roth, Roland; Gillespie, Dirk

    2016-06-01

    A functional for the electrostatic excess free-energy for charged, hard sphere fluids is proposed. The functional is derived from two complementary, but equivalent, interpretations of the mean spherical approximation (MSA). The first combines fundamental measure theory (FMT) from hard-core interactions with the idea that MSA can be interpreted in terms of the interaction spherical shells of charge. This formulation gives the free-energy density as a function of weighted densities. When all the ions have the same size, the functional adopts an FMT-like form. The second in effect ‘functionalizes’ the derivation of MSA; that is, it generalizes the MSA as a functional-based version of MSA (fMSA). This formulation defines the free-energy density as a function of a position-dependent MSA screening parameter and the weighted densities of the FMT approach. This FMT/fMSA functional is shown to give accurate density profiles, as compared to Monte Carlo simulations, under a wide range of ion concentrations, size asymmetries, and valences.

  3. Stability analysis of an open shallow cylindrical shell with imperfection under external pressure

    Directory of Open Access Journals (Sweden)

    Psotny Martin

    2017-01-01

    Full Text Available Elastic shallow generalized cylindrical shells of an open cross-section subjected to the various forms of external pressure are analysed in the paper numerically using the finite element method. Load - displacement paths are calculated for the perfect and imperfect geometry, respectively. Special attention is paid to the influence of initial geometric imperfection on the limit load level of fundamental equilibrium path of nonlinear analysis. ANSYS system was used for analysis, arc-length method was chosen for obtaining fundamental load - displacement path of solution.

  4. Vibration of a single microcapsule with a hard plastic shell in an acoustic standing wave field.

    Science.gov (United States)

    Koyama, Daisuke; Kotera, Hironori; Kitazawa, Natsuko; Yoshida, Kenji; Nakamura, Kentaro; Watanabe, Yoshiaki

    2011-04-01

    Observation techniques for measuring the small vibration of a single microcapsule of tens of nanometers in an acoustic standing wave field are discussed. First, simultaneous optical observation of a microbubble vibration by two methods is investigated, using a high-speed video camera, which permits two-dimensional observation of the bubble vibration, and a laser Doppler vibrometer (LDV), which can observe small bubble vibration amplitudes at high frequency. Bubbles of tens of micrometers size were trapped at the antinode of an acoustic standing wave generated in an observational cell. Bubble vibration at 27 kHz could be observed and the experimental results for the two methods showed good agreement. The radial vibration of microcapsules with a hard plastic shell was observed using the LDV and the measurement of the capsule vibration with radial oscillation amplitude of tens of nanometers was successful. The acoustic radiation force acting on microcapsules in the acoustic standing wave was measured from the trapped position of the standing wave and the radial oscillation amplitude of the capsules was estimated from the theoretical equation of the acoustic radiation force, giving results in good agreement with the LDV measurements. The radial oscillation amplitude of a capsule was found to be proportional to the amplitude of the driving sound pressure. A larger expansion ratio was observed for capsules closer to the resonance condition under the same driving sound pressure and frequency.

  5. Adsorption of gold ions from industrial wastewater using activated carbon derived from hard shell of apricot stones - an agricultural waste.

    Science.gov (United States)

    Soleimani, Mansooreh; Kaghazchi, Tahereh

    2008-09-01

    In this study, hard shell of apricot stones was selected from agricultural solid wastes to prepare effective and low cost adsorbent for the gold separation from gold-plating wastewater. Different adsorption parameters like adsorbent dose, particle size of activated carbon, pH and agitation speed of mixing on the gold adsorption were studied. The results showed that under the optimum operating conditions, more than 98% of gold was adsorbed onto activated carbon after only 3h. The equilibrium adsorption data were well described by the Freundlich and Langmuir isotherms. Isotherms have been used to obtain thermodynamic parameters. Gold desorption studies were performed with aqueous solution mixture of sodium hydroxide and organic solvents at ambient temperatures. Quantitative recovery of gold ions is possible by this method. As hard shell of apricot stones is a discarded as waste from agricultural and food industries, the prepared activated carbon is expected to be an economical product for gold ion recovery from wastewater.

  6. Influence of capsule shell composition on the performance indicators of hypromellose capsule in comparison to hard gelatin capsules.

    Science.gov (United States)

    Al-Tabakha, Moawia M; Arida, Adi Issam; Fahelelbom, Khairi M S; Sadek, Bassem; Saeed, Dima Ahmed; Abu Jarad, Rami A; Jawadi, Jeevani

    2015-01-01

    The purpose of this study was to assess the in vitro performances of "vegetable" capsules in comparison to hard gelatin capsules in terms of shell weight variation, reaction to different humidity conditions, resistance to stress in the absence of moisture, powder leakage, disintegration and dissolution. Two types of capsules made of HPMC produced with (Capsule 2) or without (Capsule 3) a gelling agent and hard gelatin capsules (Capsule 1) were assessed. Shell weight variability was relatively low for all tested capsules shells. Although Capsule 1 had the highest moisture content under different humidity conditions, all capsule types were unable to protect the encapsulated hygroscopic polyvinylpyrrolidone (PVP) powder from surrounding humidity. The initial disintegration for all Capsule 1 occurred within 3 min, but for other types of capsules within 6 min (n = 18). Dissolution of acetaminophen was better when the deionized water (DIW) temperature increased from 32 to 42 °C in case of Capsule 1, but the effect of temperature was not significant for the other types of capsules. Acetaminphen dissolution from Capsule 1 was the fastest (i.e. >90% in 10 min) and independent of the media pH or contents unlike Capsule 2 which was influenced by the pH and dissolution medium contents. It is feasible to use hypromellose capsules shells with or without gelling agent for new lines of pharmaceutical products, however, there is a window for capsule shells manufacturing companies to improve the dissolution of their hypromellose capsules to match the conventional gelatin capsule shells and eventually replace them.

  7. Synthesis and magnetic properties of cobalt-iron/cobalt-ferrite soft/hard magnetic core/shell nanowires.

    Science.gov (United States)

    Londoño-Calderón, César Leandro; Moscoso-Londoño, Oscar; Muraca, Diego; Arzuza, Luis; Carvalho, Peterson; Pirota, Kleber Roberto; Knobel, Marcelo; Pampillo, Laura Gabriela; Martínez-García, Ricardo

    2017-06-16

    A straightforward method for the synthesis of CoFe2.7/CoFe2O4 core/shell nanowires is described. The proposed method starts with a conventional pulsed electrodeposition procedure on alumina nanoporous template. The obtained CoFe2.7 nanowires are released from the template and allowed to oxidize at room conditions over several weeks. The effects of partial oxidation on the structural and magnetic properties were studied by x-ray spectrometry, magnetometry, and scanning and transmission electron microscopy. The results indicate that the final nanowires are composed of 5 nm iron-cobalt alloy nanoparticles. Releasing the nanowires at room conditions promoted surface oxidation of the nanoparticles and created a CoFe2O4 shell spinel-like structure. The shell avoids internal oxidation and promotes the formation of bi-magnetic soft/hard magnetic core/shell nanowires. The magnetic properties of both the initial single-phase CoFe2.7 nanowires and the final core/shell nanowires, reveal that the changes in the properties from the array are due to the oxidation more than effects associated with released processes (disorder and agglomeration).

  8. p -shell carrier assisted dynamic nuclear spin polarization in single quantum dots at zero external magnetic field

    Science.gov (United States)

    Fong, C. F.; Ota, Y.; Harbord, E.; Iwamoto, S.; Arakawa, Y.

    2016-03-01

    Repeated injection of spin-polarized carriers in a quantum dot (QD) leads to the polarization of nuclear spins, a process known as dynamic nuclear spin polarization (DNP). Here, we report the observation of p-shell carrier assisted DNP in single QDs at zero external magnetic field. The nuclear field—measured by using the Overhauser shift of the singly charged exciton state of the QDs—continues to increase, even after the carrier population in the s-shell saturates. This is also accompanied by an abrupt increase in nuclear spin buildup time as p-shell emission overtakes that of the s shell. We attribute the observation to p-shell electrons strongly altering the nuclear spin dynamics in the QD, supported by numerical simulation results based on a rate equation model of coupling between electron and nuclear spin system. Dynamic nuclear spin polarization with p-shell carriers could open up avenues for further control to increase the degree of nuclear spin polarization in QDs.

  9. Stability and Postcritical Behavior of Cylindrical Composite Shells with Local Imperfections Under External Pressure

    Science.gov (United States)

    Semenyuk, N. P.; Trach, V. M.

    2016-11-01

    An approach to solving the problem of the nonlinear deformation of orthotropic cylindrical shells is proposed. On the surface of the shell, there is a local deflection bounded by segments of the coordinate lines. The Timoshenko-Mindlin shell theory, the Byskov-Hatchinson asymptotic method, and the continuous continuation method for solving nonlinear algebraic equations are used. To determine the critical loads and deformation paths, it is necessary to estimate the number of interacting modes sufficient to achieve satisfactory accuracy. Examples of analyzing composite shells with an initial local deflection of positive or negative amplitude are given

  10. Shell

    OpenAIRE

    Harper, Catherine

    2006-01-01

    Susie MacMurray's Shell installation manifests in Pallant House Gallery, Chichester, like some pulsing exotica, a heavily-textured wall-paper, darkly decorative, heavily luxurious, broodingly present, with more than a hint of the uncanny or the gothic. A remarkable undertaking by an artist of significance, this work's life-span will be just one year, and then it will disappear, leaving no physical trace, but undoubtedly contributing in a much less tangible way to an already rich layering of n...

  11. Following the Evolution of Hard Sphere Glasses in Infinite Dimensions under External Perturbations: Compression and Shear Strain

    Science.gov (United States)

    Rainone, Corrado; Urbani, Pierfrancesco; Yoshino, Hajime; Zamponi, Francesco

    2015-01-01

    We consider the adiabatic evolution of glassy states under external perturbations. The formalism we use is very general. Here we use it for infinite-dimensional hard spheres where an exact analysis is possible. We consider perturbations of the boundary, i.e., compression or (volume preserving) shear strain, and we compute the response of glassy states to such perturbations: pressure and shear stress. We find that both quantities overshoot before the glass state becomes unstable at a spinodal point where it melts into a liquid (or yields). We also estimate the yield stress of the glass. Finally, we study the stability of the glass basins towards breaking into sub-basins, corresponding to a Gardner transition. We find that close to the dynamical transition, glasses undergo a Gardner transition after an infinitesimal perturbation.

  12. Buckling Capacity Curves for Steel Spherical Shells Loaded by the External Pressure

    Directory of Open Access Journals (Sweden)

    Błażejewski Paweł

    2015-03-01

    Full Text Available Assessment of buckling resistance of pressurised spherical cap is not an easy task. There exist two different approaches which allow to achieve this goal. The first approach involves performing advanced numerical analyses in which material and geometrical nonlinearities would be taken into account as well as considering the worst imperfections of the defined amplitude. This kind of analysis is customarily called GMNIA and is carried out by means of the computer software based on FEM. The other, comparatively easier approach, relies on the utilisation of earlier prepared procedures which enable determination of the critical resistance pRcr, the plastic resistance pRpl and buckling parameters a, b, h, l 0 needed to the definition of the standard buckling resistance curve. The determination of the buckling capacity curve for the particular class of spherical caps is the principal goal of this work. The method of determination of the critical pressure and the plastic resistance were described by the authors in [1] whereas the worst imperfection mode for the considered class of spherical shells was found in [2]. The determination of buckling parameters defining the buckling capacity curve for the whole class of shells is more complicated task. For this reason the authors focused their attention on spherical steel caps with the radius to thickness ratio of R/t = 500, the semi angle j = 30o and the boundary condition BC2 (the clamped supporting edge. Taking into account all imperfection forms considered in [2] and different amplitudes expressed by the multiple of the shell thickness, sets of buckling parameters defining the capacity curve were determined. These parameters were determined by the methods proposed by Rotter in [3] and [4] where the method of determination of the exponent h by means of additional parameter k was presented. As a result of the performed analyses the standard capacity curves for all considered imperfection modes and

  13. Propagation of combustion waves in the shell-core energetic materials with external heat losses.

    Science.gov (United States)

    Gubernov, V V; Kudryumov, V N; Kolobov, A V; Polezhaev, A A

    2017-03-01

    In this paper, the properties and stability of combustion waves propagating in the composite solid energetic material of the shell-core type are numerically investigated within the one-dimensional diffusive-thermal model with heat losses to the surroundings. The flame speed is calculated as a function of the parameters of the model. The boundaries of stability are determined in the space of parameters by solving the linear stability problem and direct integration of the governing non-stationary equations. The results are compared with the characteristics of the combustion waves in pure solid fuel. It is demonstrated that a stable travelling combustion wave solution can exist for the parameters of the model for which the flame front propagation is unstable in pure solid fuel and it can propagate several times faster even in the presence of significant heat losses.

  14. Active vibration control of a ring-stiffened cylindrical shell in contact with unbounded external fluid and subjected to harmonic disturbance by piezoelectric sensor and actuator

    Science.gov (United States)

    Kwak, Moon K.; Yang, Dong-Ho

    2013-09-01

    This paper is concerned with the suppression of vibrations and radiated sound of a ring-stiffened circular cylindrical shell in contact with unbounded external fluid by means of piezoelectric sensors and actuators. The dynamic model of a circular cylindrical shell based on the Sanders shell theory was considered together with a ring stiffener model. The mass and stiffness matrices for a ring stiffener were newly derived in this study and added to the mass and stiffness matrices of the cylindrical shell, respectively. The fluid-added mass matrix, which was derived by using the baffled shell theory, was also added to the mass matrix. Finally, the equations representing the piezoelectric sensor measurement and piezoelectric actuation complete the theoretical model for the addressed problem. The natural vibration characteristics of the ring-stiffened cylindrical shell both in air and in water were investigated both theoretically and experimentally. The theoretical predictions were in good agreement with the experimental results. An active vibration controller which can cope with a harmonic disturbance was designed by considering the modified higher harmonic control, which is, in fact, a band rejection filter. An active vibration control experiment on the submerged cylindrical shell was carried out in a water tank and the digital control system was used. The experimental results showed that both vibrations and radiation sound of the submerged cylindrical shell were suppressed by a pair of piezoelectric sensor and actuator.

  15. One-pot synthesis of biocompatible Te-phenol formaldehyde resin core-shell nanowires with uniform size and unique fluorescent properties by a synergized soft-hard template process

    Energy Technology Data Exchange (ETDEWEB)

    Qian Haisheng; Zhu Enbo; Zheng Shunji; Yang Xingyun; Li Liangchao; Tong Guoxiu [Department of Chemistry, College of Chemistry and Life Science, Zhejiang Normal University, Jinhua 321004 (China); Li Zhengquan; Hu Yong; Guo Changfa [Institute of Physical Chemistry, Zhejiang Normal University, Jinhua 321004 (China); Guo Huichen, E-mail: shqian@zjnu.cn, E-mail: ghch-2004@hotmail.com [State Key Laboratory of Veterinary Etiological Biology and Key Laboratory of Animal Virology of Ministry of Agriculture, Lanzhou Veterinary Research Institute, Chinese Academy of Agricultural Sciences, Xujiaping 11, Lanzhou, Gansu 730046 (China)

    2010-12-10

    One-pot hydrothermal process has been developed to synthesize uniform Te-phenol formaldehyde resin core-shell nanowires with unique fluorescent properties. A synergistic soft-hard template mechanism has been proposed to explain the formation of the core-shell nanowires. The Te-phenol formaldehyde resin core-shell nanowires display unique fluorescent properties, which give strong luminescent emission in the blue-violet and green regions with excitation wavelengths of 270 nm and 402 nm, respectively.

  16. Effect of external resonant fields and limiter biasing on hard X-ray intensity and mirnov oscillations in IR-T1 Tokamak

    Science.gov (United States)

    Ghanbari, K.; Ghoranneviss, M.; Elahi, A. Salar

    2015-01-01

    Runaway electrons in tokamaks can cause serious damage to the first wall of the reactor and decrease its life time. Also, hard x-ray emission generated from high energy runaway electrons lead to the plasma energy loss. Therefore, suggesting methods to minimize runaway electron in tokamaks are very important. Applying external resonant field is one of the methods for controlling the Magneto Hydrodynamic (MHD) activity. Relation between the MHD activity and runaway electrons has already been studied (Jaspers et al. 1994; Ghanbari et al. 2012) Jaspers, R., et al. 1994 Phys. Rev. Lett. 72, 4093; Ghanbari, M. R., et al. 2012a Phys. Scr. 83, 055501. Present study attempts to investigate the effects of limiter biasing and Resonant Helical magnetic Field (RHF) on the generation of runaway electrons. For this purpose, plasma parameters such as plasma current, MHD oscillation, loop voltage, emitted hard x-ray intensity, Halpha impurity, safety factor in the presence and absence of external fields, were measured. Frequency activity was investigated with FFT analysis. The results show that applying resonant fields can control the MHD activity, and then hard x-ray emitted from the runaway electrons.

  17. Effect of an external field on the structure and the phase transitions of a confined mixture of neutral and dipolar hard spheres

    Science.gov (United States)

    Chung, S.; Malherbe, J. G.; Amokrane, S.

    2015-11-01

    We study by Monte Carlo simulation the model of a binary mixture of neutral and dipolar hard spheres confined between two widely separated planar walls and subjected to a uniform external field. The goal is to investigate the structural response and the phase transitions of a fluid of hard-sphere-like colloids dispersed in a low-permittivity solvent under the combined effect of geometrical confinement and applied field. In a wide slab, the direction of the field, either normal or perpendicular to the walls, remains one of the most important factors that govern the response of the mixture: in normal field, a wide variety of structural effects are evidenced, including partial wetting or drying of the wall; in parallel field, phase separation is favoured with a specific population of the region close to the wall and a clear separation of the two species. These results suggest possible means to modulate the response of the confined fluid for specific needs.

  18. Harnessing the advantages of hard and soft colloids by the use of core-shell particles as interfacial stabilizers

    NARCIS (Netherlands)

    Buchcic, C.; Tromp, R.H.; Meinders, M.B.J.; Cohen Stuart, M.A.

    2017-01-01

    The ability of colloidal particles to penetrate fluid interfaces is a crucial factor in the preparation of particle stabilized disperse systems such as foams and emulsions. For hard micron-sized particles the insertion into fluid interfaces requires substantial energy input, but soft particles

  19. A High-Order Theory for the Analysis of Circular Cylindrical Composite Sandwich Shells with Transversely Compliant Core Subjected to External Loads

    DEFF Research Database (Denmark)

    Rahmani, Omid; Khalili, S.M.R.; Thomsen, Ole Thybo

    2012-01-01

    , in contrast to most of the available sandwich plate and shell theories, no prior assumptions are made with respect to the displacement field in the core. Herein the displacement and the stress fields of the core material are determined through a 3D elasticity solution. The performance of the present theory......A new model based on the high order sandwich panel theory is proposed to study the effect of external loads on the free vibration of circular cylindrical composite sandwich shells with transversely compliant core, including also the calculation of the buckling loads. In the present model...... is compared with that of other sandwich theories by the presentation of comparative results obtained for several examples encompassing different material properties and geometric parameters. It is shown that the present model produce results of very high accuracy, and it is suggested that the present model...

  20. Versatile post-functionalization of the external shell of cowpea chlorotic mottle virus by using click chemistry

    NARCIS (Netherlands)

    Hommersom, C.A.; Matt, B.D.; van der Ham, A.M.; Cornelissen, Jeroen Johannes Lambertus Maria; Katsonis, Nathalie Hélène

    2014-01-01

    We present the modification of the outer protein shell of cowpea chlorotic mottle virus (CCMV) with linear and strained alkyne groups. These functionalized protein capsids constitute valuable platforms for post-functionalization via click chemistry. After modification, the integrity of the capsid an

  1. Paleobiology of the Latest Tithonian (Late Jurassic Ammonite Salinites grossicostatum Inferred from Internal and External Shell Parameters.

    Directory of Open Access Journals (Sweden)

    Patrick Zell

    Full Text Available Based on material from the uppermost Tithonian La Caja Formation at Puerto Piñones, northeastern Mexico, the complete ontogenetic development (protoconch to adult of the ammonite Salinites grossicostatum is outlined by a detailed morphometrical shell analysis. The embryonic stage, consisting of a small ellipsoid protoconch and ammonitella, ends at about 0.6 mm. Four major morphological changes are differentiated throughout ontogeny based on internal features such as reduced septal spacing and siphuncle position. Sexual dimorphism is reflected by shell size, siphuncular diameter, differences in the morphology of the apophysis, and by two distinct general trends in septal spacing. In addition, macroconchs are characterized by septal crowding at different stages, followed by the return to normal septum distances. Our analysis indicates a change in the mode of life after the neanic stage. A change in habitat preference is inferred for adult individuals. While microconchs persisted at Puerto Piñones, large mature macroconchs temporarily migrated to other areas, possibly for egg deposition. Salinites grossicostatum is endemic to the ancient Gulf of Mexico and is there restricted to outer continental shelf environments.

  2. 杏核的活性壳:一种用于黄金回收的有价值的吸附剂%Activated Hard Shell of Apricot Stones: A Promising Adsorbent in Gold Recovery

    Institute of Scientific and Technical Information of China (English)

    Mansooreh Soleimani; Tahereh Kaghazchi

    2008-01-01

    Activated carbon has been proven to be an effective adsorbent for the recovery of a wide variety of metal ions from aqueous solutions. In this research, the activated hard shell of Iranian apricot stones was used for gold recovery from electro-plating wastewater. The effect of parameters such as dose and particle size of adsorbent,pH, agitation speed of mixing on the gold recovery was investigated. The results showed that under the optimum operating conditions more than 98% of gold ions were adsorbed onto activated carbon after just 3 h. In addition, the adsorbed gold could be eluted from this adsorbent by improved striping method. The process involves contact of gold-laden adsorbent with a strong base at ambient temperatures followed by elution with an aqueous solution con-taining an organic solvent. It was found that activated hard shell of apricot stones has the potential to replace im-ported commercial activated carbons in gold adsorption processes.

  3. The use of external micro-PIXE to investigate the factors determining the Sr:Ca ratio in the shells of fossil aragonitic molluscs

    Energy Technology Data Exchange (ETDEWEB)

    Purton-Hildebrand, Louise M.A.; Grime, Geoff W. E-mail: geoff.grime@materials.ox.ac.uk; Shields, Graham A.; Brasier, Martin D

    2001-07-01

    The ratio of strontium to calcium in the shells of fossil marine molluscs has been proposed as an indicator of seawater temperature in past epochs, since this is less affected by other environmental conditions (such as variation of salinity) than the more conventional seawater palaeotemperature proxy {delta}{sup 18}O. However, in this paper, we demonstrate that the Sr:Ca ratio is influenced by several factors including temperature and growth rate. Two fossil molluscs, a large spiral gastropod, Clavilithes macrospira, and a large bivalve, Venericarda planicosta, from the Eocene-aged deposits of Southern England were selected for study. The variation of the Sr:Ca ratio as a function of distance along the growth direction was measured using PIXE in the Oxford external microbeam facility and the {delta}{sup 18}O was measured using small samples removed by drilling at points along the same direction. The Sr:Ca profiles show a significant increase of Sr with age, as well as seasonal, possibly temperature-related variations. Comparison of the Sr:Ca profiles with those for {delta}{sup 18}O and the spacing of the dark annual growth bands suggests that Sr incorporation is controlled primarily by metabolic activity, which in turn is influenced by factors such as temperature, salinity, age and growth rate.

  4. A kinetic model for describing effect of the external surface concentration of TiO2 on the reactivity of egg-shell activated carbon supported TiO2 photocatalyst

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The porous support supported TiO2 is considered to be the promising photocatalyst due to the fact that it is easily recovered from water and has high capacity to mineralize pollutants. Obviously, the expected structure of this kind of photocatalyst is egg-shell, that is, TiO2 is mainly on the external surface of the porous support. The reactivity of the supported photocatalyst strongly depends on the concentration of TiO2 on the external surface of the porous support. In this study, a kinetic model was developed to describe the effect of the external surface concentration of TiO2 (CESC) on the reactivity of egg-shell activated carbon (AC) supported TiO2 photocatalysts. It was found that the obtained model precisely described the effect of CESC, on the reactivity of TiO2/AC photocatalysts. This study can be used to deeply understand the performance of TiO2/AC catalysts and to provide valuable information on designing efficient supported TiO2 photocatalysts.

  5. Dynamic responses and influential parameters of reticulated shell subjected to external blast loading%外部爆炸荷载作用下网壳结构的动力响应及其影响参数分析

    Institute of Scientific and Technical Information of China (English)

    翟希梅; 黄明

    2012-01-01

    Finite element software ANSYS/LS-DYNA is used to establish a refined kiewitt8 single-layer reticulated shell finite element model,which contains reticulated shell member, purlin hanger, purlin, rivet and roof boarding to simulate the dynamic responses of a structure subjected to external blast loading by using ALE (Arbitrary-La-grange-Euler) algorithm. The strain rate effect of materials and the inter-collision of the components are considered. The responses of the structure under external eccentric blast loading with varied TNT equivalent weights, explosion point position, section size of reticulated shell bar, rise-span ratio, supporting condition, thickness of roof board-ing, roof boarding load and the form of roof boarding are obtained by the comparison of the plastic strain, the plastic development degree and the displacement of the structure, which could provide a reference for reasonable defense design of reticulated shell structure to resisting blast. The results show that with the changes of each parameter, there are four damage modes of kiewitt8 single-layer reticulated shell under external blast loading, that is intact, local deformation, local damage and total collapse.%运用ANSYS/LS-DYNA动力有限元软件建立了包含网壳杆件、檩托、檩条、铆钉、屋面板在内的精细化K8型单层球面网壳有限元模型,通过选择考虑材料应变率效应的钢材本构关系,采用流固耦合算法并考虑构件相互碰撞影响,对结构在外部爆炸荷载作用下的动力响应进行了数值模拟,获得了TNT炸药当量、爆炸点距离、杆件截面、矢跨比、支承条件、屋面板厚度、屋面荷载及屋面板形式等参数对结构动力响应的影响规律,可为网壳抗爆防护设计提供参考.网壳结构在外部爆炸荷载作用下,随着各参数取值的变化,存在“完好无损、局部凹陷、局部破坏、整体倒塌”四种破坏类型.

  6. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

  7. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the fields of power conversion devices and broadcasting/communication amplifiers, high power, high frequency and low losses are desirable. Further, for electronic elements in aerospace/aeronautical/geothermal surveys, etc., heat resistance to 500degC is required. Devices which respond to such hard specifications are called hard electronic devices. However, with Si which is at the core of the present electronics, the specifications cannot fully be fulfilled because of the restrictions arising from physical values. Accordingly, taking up new device materials/structures necessary to construct hard electronics, technologies to develop these to a level of IC were examined and studied. They are a technology to make devices/IC of new semiconductors such as SiC, diamond, etc. which can handle higher temperature, higher power and higher frequency than Si and also is possible of reducing losses, a technology to make devices of hard semiconducter materials such as a vacuum microelectronics technology using ultra-micro/high-luminance electronic emitter using negative electron affinity which diamond, etc. have, a technology to make devices of oxides which have various electric properties, etc. 321 refs., 194 figs., 8 tabs.

  8. Bio-relevant dissolution testing of hard capsules prepared from different shell materials using the dynamic open flow through test apparatus.

    Science.gov (United States)

    Garbacz, Grzegorz; Cadé, Dominique; Benameur, Hassan; Weitschies, Werner

    2014-06-16

    Current compendial dissolution and disintegrating testing is unable to mimic physiological conditions affecting gastric drug release from immediate release dosage forms. In order to obtain more realistic data, a novel test setup was developed that we term a 'dynamic open flow through test apparatus'. It is based on the previously described dissolution stress test device and attempts to simulate the intra-gastric dissolution conditions pertinent to immediate release dosage forms administered under fasting conditions with respect to flow rates, intra-gastric temperature profiles and gastric motility. The concept of the dynamic open flow through test apparatus has been tested using five different types of hard capsules: conventional hard gelatin capsules (HGC), three hypromellose based capsules (Vcaps, Vcaps Plus and DRcaps) and pullulan based capsules (Plantcaps). These were of different sizes but all contained 100mg caffeine in each formulation, adjusted to avoid buoyancy by addition of excipient. When the capsules were stressed in the apparatus under the dynamic flow conditions applying mild pressure simulating gastric motility, release from release from Vcaps Plus, Vcaps and Plantcaps capsules was very well comparable to HGC. Capsules are usually swallowed with cold water and the temperature dependency of release from gelatin was noted as a significant factor, since heat exchange in the stomach is slow. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. Techniques Exploring on Machining External Thread of Hard Alloy by Electric Discharge Machine%硬质合金外螺纹的电火花成型机加工工艺探讨

    Institute of Scientific and Technical Information of China (English)

    何兴会; 杨国英

    2012-01-01

    结合硬质合金的材料特性,将电火花成型电极加工内外螺纹的工艺差异进行对比,分析硬质合金外螺纹电火花加工工艺难点,并提出合理的改进措施.再以电火花成型电极加工YG6硬质合金外螺纹为实例,运用改进方法成功加工出较高质量的外螺纹.结果表明:选取合适的峰值电流,改进加工电极结构是保证外螺纹加工质量的关键技术.最后对单电极电火花加工外螺纹的可行性工艺方案进行详细说明.%Considering the material attribute of hard alloy, the technique difference between external thread and inner thread machined by electric discharge machine is compared, and then the difficulties in machining external thread of hard alloy by electric discharge machine is analyzed and a better solution can be proposed. Take a machined work piece of YG6 for example to illustrate the high quality validity of the solutions. The results show that better quality is obtained by selecting suitable peak current and redesigning the electrode in machining external thread.

  10. Thermodynamic hardness and the maximum hardness principle

    Science.gov (United States)

    Franco-Pérez, Marco; Gázquez, José L.; Ayers, Paul W.; Vela, Alberto

    2017-08-01

    An alternative definition of hardness (called the thermodynamic hardness) within the grand canonical ensemble formalism is proposed in terms of the partial derivative of the electronic chemical potential with respect to the thermodynamic chemical potential of the reservoir, keeping the temperature and the external potential constant. This temperature dependent definition may be interpreted as a measure of the propensity of a system to go through a charge transfer process when it interacts with other species, and thus it keeps the philosophy of the original definition. When the derivative is expressed in terms of the three-state ensemble model, in the regime of low temperatures and up to temperatures of chemical interest, one finds that for zero fractional charge, the thermodynamic hardness is proportional to T-1(I -A ) , where I is the first ionization potential, A is the electron affinity, and T is the temperature. However, the thermodynamic hardness is nearly zero when the fractional charge is different from zero. Thus, through the present definition, one avoids the presence of the Dirac delta function. We show that the chemical hardness defined in this way provides meaningful and discernible information about the hardness properties of a chemical species exhibiting integer or a fractional average number of electrons, and this analysis allowed us to establish a link between the maximum possible value of the hardness here defined, with the minimum softness principle, showing that both principles are related to minimum fractional charge and maximum stability conditions.

  11. G359.97-0.038: A HARD X-RAY FILAMENT ASSOCIATED WITH A SUPERNOVA SHELL-MOLECULAR CLOUD INTERACTION

    Energy Technology Data Exchange (ETDEWEB)

    Nynka, Melania; Hailey, Charles J.; Zhang, Shuo; Gotthelf, Eric V.; Mori, Kaya; Perez, Kerstin M. [Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027 (United States); Morris, Mark M. [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Zhao, Jun-Hui [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, MS 78, Cambridge, MA 02138 (United States); Goss, Miller [NRAO, P.O. Box O, Socorro, NM 87801 (United States); Bauer, Franz E. [Instituto de Astrofísica, Facultad de Física, Pontificia Universidad Católica de Chile, 306, Santiago 22 (Chile); Boggs, Stephen E.; Craig, William W. [Space Sciences Laboratory, University of California, Berkeley, CA 94720 (United States); Christensen, Finn E. [DTU Space-National Space Institute, Technical University of Denmark, Elektrovej 327, DK-2800 Lyngby (Denmark); Harrison, Fiona A. [Cahill Center for Astronomy and Astrophysics, California Institute of Technology, Pasadena, CA 91125 (United States); Stern, Daniel [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Zhang, William W. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2015-02-20

    We present the first high-energy X-ray (>10 keV) observations of the non-thermal filament G359.97-0.038 using the Nuclear Spectroscopic Telescope Array (NuSTAR). This filament is one of approximately 20 X-ray filaments of unknown origin located in the central 20 pc region in the Galactic Center near Sgr A*. Its NuSTAR and Chandra broadband spectrum is characterized by a single power law with Γ = 1.3 ± 0.3 that extends from 2 to 50 keV, with an unabsorbed luminosity of 1.3 × 10{sup 33} erg s{sup –1} (d/8 kpc){sup 2} in the 2-8 keV band. Despite possessing a cometary X-ray morphology that is typical of a pulsar wind nebula (PWN) in high-resolution Chandra imaging, our spatially resolved Chandra spectral analysis found no significant spectral softening along the filament as would be expected from particle synchrotron cooling. Coincident radio emission is detected using the Very Large Array at 5.5 and 8.3 GHz. We examine and subsequently discard a PWN or magnetic flux tube as the origin of G359.97-0.038. We use broadband spectral characteristics and a morphological analysis to show that G359.97-0.038 is likely an interaction site between the shell of Sgr A East and an adjacent molecular cloud. This is supported by CS molecular line spectroscopy and the presence of an OH maser.

  12. 2TB hard disk drive

    CERN Multimedia

    This particular object was used up until 2012 in the Data Centre. It slots into one of the Disk Server trays. Hard disks were invented in the 1950s. They started as large disks up to 20 inches in diameter holding just a few megabytes (link is external). They were originally called "fixed disks" or "Winchesters" (a code name used for a popular IBM product). They later became known as "hard disks" to distinguish them from "floppy disks (link is external)." Hard disks have a hard platter that holds the magnetic medium, as opposed to the flexible plastic film found in tapes and floppies.

  13. Observations on the breeding habits, shell development, decollation, and reproductive anatomy of Pontophaedusa funiculum (Mousson 1856 (Gastropoda, Pulmonata, Clausiliidae, Phaedusinae

    Directory of Open Access Journals (Sweden)

    Barna Páll-Gergely

    2008-02-01

    Full Text Available The internal and external egg morphology, shell development, decollation process, mating behaviour and reproductive anatomy (genital structure, inner structure of the penis, fine structure of the retractor muscle and the spermatophore of the clausiliid Pontophaedusa funiculum (Mousson 1856 are described, and illustrated by photographs of the laid eggs, their inner structure, juvenile, young adult and old individuals, as well as a schematic drawing of the mating. P. funiculum is the only known clausiliid species with hard shelled eggs and the only known example of the family Clausiliidae which mates face to face. The taxonomic position within the Phaedusinae subfamily is mentioned.

  14. Euclidean Approach for Entropy of Black Shells

    CERN Document Server

    S., J Robel Arenas

    2016-01-01

    We introduce the concept of black shell, consisting on a massive thin spherical shell contracting toward its gravitational radius from the point of view of an external observer far from the shell, in order to effectively model the gravitational collapse. Considering complementary description of entanglement entropy of a black shell and according to Gibbons-Hawking Euclidean approach, we calculate the Bekenstein-Hawking entropy retrieving horizon integral and discarding boundary at infinity.

  15. Fabrication of diamond shells

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, Alex V.; Biener, Juergen; Wild, Christoph; Woerner, Eckhard

    2016-11-01

    A novel method for fabricating diamond shells is introduced. The fabrication of such shells is a multi-step process, which involves diamond chemical vapor deposition on predetermined mandrels followed by polishing, microfabrication of holes, and removal of the mandrel by an etch process. The resultant shells of the present invention can be configured with a surface roughness at the nanometer level (e.g., on the order of down to about 10 nm RMS) on a mm length scale, and exhibit excellent hardness/strength, and good transparency in the both the infra-red and visible. Specifically, a novel process is disclosed herein, which allows coating of spherical substrates with optical-quality diamond films or nanocrystalline diamond films.

  16. Hard sphere packings within cylinders.

    Science.gov (United States)

    Fu, Lin; Steinhardt, William; Zhao, Hao; Socolar, Joshua E S; Charbonneau, Patrick

    2016-03-07

    Arrangements of identical hard spheres confined to a cylinder with hard walls have been used to model experimental systems, such as fullerenes in nanotubes and colloidal wire assembly. Finding the densest configurations, called close packings, of hard spheres of diameter σ in a cylinder of diameter D is a purely geometric problem that grows increasingly complex as D/σ increases, and little is thus known about the regime for D > 2.873σ. In this work, we extend the identification of close packings up to D = 4.00σ by adapting Torquato-Jiao's adaptive-shrinking-cell formulation and sequential-linear-programming (SLP) technique. We identify 17 new structures, almost all of them chiral. Beyond D ≈ 2.85σ, most of the structures consist of an outer shell and an inner core that compete for being close packed. In some cases, the shell adopts its own maximum density configuration, and the stacking of core spheres within it is quasiperiodic. In other cases, an interplay between the two components is observed, which may result in simple periodic structures. In yet other cases, the very distinction between the core and shell vanishes, resulting in more exotic packing geometries, including some that are three-dimensional extensions of structures obtained from packing hard disks in a circle.

  17. Statistical mechanics of thin spherical shells

    CERN Document Server

    Kosmrlj, Andrej

    2016-01-01

    We explore how thermal fluctuations affect the mechanics of thin amorphous spherical shells. In flat membranes with a shear modulus, thermal fluctuations increase the bending rigidity and reduce the in-plane elastic moduli in a scale-dependent fashion. This is still true for spherical shells. However, the additional coupling between the shell curvature, the local in-plane stretching modes and the local out-of-plane undulations, leads to novel phenomena. In spherical shells thermal fluctuations produce a radius-dependent negative effective surface tension, equivalent to applying an inward external pressure. By adapting renormalization group calculations to allow for a spherical background curvature, we show that while small spherical shells are stable, sufficiently large shells are crushed by this thermally generated "pressure". Such shells can be stabilized by an outward osmotic pressure, but the effective shell size grows non-linearly with increasing outward pressure, with the same universal power law expone...

  18. Pro Bash Programming Scripting the Linux Shell

    CERN Document Server

    Johnson, Chris FA

    2010-01-01

    The bash shell is a complete programming language, not merely a glue to combine external Linux commands. By taking full advantage of shell internals, shell programs can perform as snappily as utilities written in C or other compiled languages. And you will see how, without assuming Unix lore, you can write professional bash 4.0 programs through standard programming techniques. *Complete bash coverage*Teaches bash as a programming language*Helps you master bash 4.0 features What you'll learn*Use the shell to write new utilities and accomplish most programming tasks.*Use shell parameter expansio

  19. Off-shell two loop QCD vertices

    CERN Document Server

    Gracey, J A

    2014-01-01

    We calculate the triple gluon, ghost-gluon and quark-gluon vertex functions at two loops in the MSbar scheme in the chiral limit for an arbitrary linear covariant gauge when the external legs are all off-shell.

  20. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

  1. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

  2. Shell supports

    DEFF Research Database (Denmark)

    Almegaard, Henrik

    2004-01-01

    A new statical and conceptual model for membrane shell structures - the stringer system - has been found. The principle was first published at the IASS conference in Copenhagen (OHL91), and later the theory has been further developed (ALMO3)(ALMO4). From the analysis of the stringer model it can...... be concluded that all membrane shells can be described by a limited number of basic configurations of which quite a few have free edges....

  3. Standard hardness conversion tables for metals relationship among brinell hardness, vickers hardness, rockwell hardness, superficial hardness, knoop hardness, and scleroscope hardness

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 Conversion Table 1 presents data in the Rockwell C hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of non-austenitic steels including carbon, alloy, and tool steels in the as-forged, annealed, normalized, and quenched and tempered conditions provided that they are homogeneous. 1.2 Conversion Table 2 presents data in the Rockwell B hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of non-austenitic steels including carbon, alloy, and tool steels in the as-forged, annealed, normalized, and quenched and tempered conditions provided that they are homogeneous. 1.3 Conversion Table 3 presents data on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, and Knoop hardness of nickel and high-nickel alloys (nickel content o...

  4. OPTIMAL THICKNESS OF A CYLINDRICAL SHELL

    Directory of Open Access Journals (Sweden)

    Paul Ziemann

    2015-01-01

    Full Text Available In this paper an optimization problem for a cylindrical shell is discussed. The aim is to look for an optimal thickness of a shell to minimize the deformation under an applied external force. As a side condition, the volume of the shell has to stay constant during the optimization process. The deflection is calculated using an approach from shell theory. The resulting control-to-state operator is investigated analytically and a corresponding optimal control problem is formulated. Moreover, necessary conditions for an optimal solution are stated and numerical solutions are presented for different examples.

  5. Double Shell Plans and First Results from Outer Shell Keyhole Experiments

    Science.gov (United States)

    Montgomery, D. S.; Merritt, E. C.; Daughton, W. S.; Loomis, E. N.; Wilson, D. C.; Dodd, E. S.; Kline, J. L.; Batha, S. H.; Robey, H. F.

    2016-10-01

    Double-shells are an alternative approach to achieving indirect drive ignition on NIF. These targets consist of a low-Z ablatively-driven outer shell that impacts a high-Z inner shell filled with DT fuel. In contrast to single-shell designs, double-shell targets burn the fuel via volume ignition, albeit with a lower gain. While double-shell capsules are complicated to fabricate, their design includes several beneficial metrics such as a low convergence pusher (C.R. NIF, and discuss challenges as well as uncertainties and trade-offs in the physics issues compared to single-shells, such as sensitivity to hard x-ray preheat of the inner shell. First experimental results measuring hard x-ray preheat, shock breakout and shock symmetry from outer-shell experiments using the NIF Keyhole platform will be presented. Work performed under the auspices of DOE by LANL under contract DE-AC52-06NA25396.

  6. SPSM and its application in cylindrical shells

    Institute of Scientific and Technical Information of China (English)

    NIE Wu; ZHOU Su-lian; PENG Hui

    2008-01-01

    In naval architectures, the structure of prismatic shell is used widely. But there is no suitable method to analyze this kind of structure. Stiffened prismatic shell method (SPSM) presented in this paper, is one of the harmonic semi-analytic methods. Theoretically, strong stiffened structure can be analyzed economically and accurately. SPSM is based on the analytical solution of the governing differential equations for orthotropic cylindrical shells. In these differential equations, the torsional stiffness, bending stiffness and the exact position of each stiffener are taken into account with the Heaviside singular function. An algorithm is introduced, in which the actions of stiffeners on shells are replaced by external loads at each stiffener position. Stiffened shells can be computed as non-stiffened shells. Eventually, the displacement solution of the equations is acquired by the introduction of Green function. The stresses in a corrugated transverse bulkhead without pier base of an oil tanker are computed by using SPSM.

  7. IMPROVEMENT EFFECT OF PLAYGROUND SURFACE BY WASTE CRUSHED SHELL MIXING

    Science.gov (United States)

    Shigematsu, Hiroaki; Oda, Kenichi; Higuchi, Emiko; Takano, Morihiro; Tasaki, Hiroshi

    If sandy soil with appropriate gradation is compacted, hard and dense ground will be generated. Even if the soil material is hard enough against shock load, the permeability of the soil decreases significantly. This paper examines the improvement effect of playground surface by waste crushed shell mixing technique. The following conclusions are obtained from the present study: 1. The maximum dry density of the sandy soil increases gradually by mixing the crushed shell. However, if the crushed shell is put into the soil too much, the density decreases conversely. 2. Although the density of the soil sample becomes high by mixing the crushed shell, the coefficient of permeability increases. 3. The soil particles once attached to the shell is not washed away easily. 4. The crushed shell doesn't change the quality of groundwater so much. 5. This repair method is applicable to improvement of playground surface.

  8. NIF Double Shell outer-shell experiments

    Science.gov (United States)

    Merritt, E. C.; Montgomery, D. S.; Kline, J. L.; Daughton, W. S.; Wilson, D. C.; Dodd, E. S.; Renner, D. B.; Cardenas, T.; Batha, S. H.

    2016-10-01

    At the core of the Double Shell concept is the kinetic energy transfer from the outer shell to the inner shell via collision. This collision sets both the implosion shape of the inner shell, from imprinting of the shape of the outer shell, as well as the maximum energy available to compress the DT fuel. Therefore, it is crucial to be able to control the time-dependent shape of the outer shell, such that the outer shell is nominally round at the collision time. We present the experiment results from our sub-scale ( 1 MJ) NIF outer-shell only shape tuning campaign, where we vary shape by changing a turn-on time delay between the same pulse shape on the inner and outer cone beams. This type of shape tuning is unique to this platform and only possible since the Double Shell design uses a single-shock drive (4.5 ns reverse ramp pulse). The outer-shell only targets used a 5.75 mm diameter standard near-vacuum NIF hohlraum with 0.032 mg/cc He gas fill, and a Be capsule with 0.4% uniform Cu dopant, with 242 um thick ablator. We also present results from a third outer-shell only shot used to measure shell trajectory, which is critical in determining the shell impact time. This work conducted under the auspices of the U.S. DOE by LANL under contract DE-AC52-06NA25396.

  9. Off-shell two-loop QCD vertices

    Science.gov (United States)

    Gracey, J. A.

    2014-07-01

    We calculate the triple gluon, ghost-gluon and quark-gluon vertex functions at two loops in the MS¯ scheme in the chiral limit for an arbitrary linear covariant gauge when the external legs are all off shell.

  10. Statistical Mechanics of Thin Spherical Shells

    Science.gov (United States)

    Košmrlj, Andrej; Nelson, David R.

    2017-01-01

    We explore how thermal fluctuations affect the mechanics of thin amorphous spherical shells. In flat membranes with a shear modulus, thermal fluctuations increase the bending rigidity and reduce the in-plane elastic moduli in a scale-dependent fashion. This is still true for spherical shells. However, the additional coupling between the shell curvature, the local in-plane stretching modes, and the local out-of-plane undulations leads to novel phenomena. In spherical shells, thermal fluctuations produce a radius-dependent negative effective surface tension, equivalent to applying an inward external pressure. By adapting renormalization group calculations to allow for a spherical background curvature, we show that while small spherical shells are stable, sufficiently large shells are crushed by this thermally generated "pressure." Such shells can be stabilized by an outward osmotic pressure, but the effective shell size grows nonlinearly with increasing outward pressure, with the same universal power-law exponent that characterizes the response of fluctuating flat membranes to a uniform tension.

  11. Multiscale Mechanics and Optimization of Gastropod Shells

    Institute of Scientific and Technical Information of China (English)

    Mostafa Yourdkhani; Damiano Pasini; Francois Barthelat

    2011-01-01

    A vast majority of mollusks grow a hard shell for protection.The structure of these shells comprises several levels of hierarchy that increase their strength and their resistance to natural threats.This article focuses on nacreous shells,which are composed of two distinct layers.The outer layer is made of calcite,which is a hard but brittle material,and the inner layer is made of nacre,a tough and ductile material.The inner and outer layers are therefore made of materials with distinct structures and properties.In this article,we demonstrate that this system is optimum to defeat attacks from predators.A two-scale modeling and optimization approach was used.At the macroscale,a two-layer finite element model of a seashell was developed to capture shell geometry.At the microscale,a representative volume element of the microstructure of nacre was used to model the elastic modulus of nacre as well as a multiaxial failure criterion,both expressed as function of microstructural parameters.Experiments were also performed on actual shells of red abalone to validate the results obtained from simulations and gain insight into the way the shell fails under sharp perforation.Both optimization and experimental results revealed that the shell displays optimum performance when two modes of failure coincide within the structure.Finally,guidelines for designing two-layer shells were proposed to improve the performance of engineered protective systems undergoing similar structural and loading conditions.

  12. Matching Games with Additive Externalities

    DEFF Research Database (Denmark)

    Branzei, Simina; Michalak, Tomasz; Rahwan, Talal

    2012-01-01

    Two-sided matchings are an important theoretical tool used to model markets and social interactions. In many real life problems the utility of an agent is influenced not only by their own choices, but also by the choices that other agents make. Such an influence is called an externality. Whereas......, optimistic, and pessimistic behaviour, and provide both computational hardness results and polynomial-time algorithms for computing stable outcomes....

  13. Shell Analysis Manual

    Science.gov (United States)

    1968-04-01

    loading (e. g. shallow shell theory , Geckeler’s approximation for symmetrically loaded shells, etc.) Although the Shear Deformation and Specialized...interest. Included are the Reissner-Meissner equations, Geckeler’s approximations, shallow - shell theory , Donnell’s theory, and others. A. General Shells of

  14. Ocean acidification alters the material properties of Mytilus edulis shells.

    Science.gov (United States)

    Fitzer, Susan C; Zhu, Wenzhong; Tanner, K Elizabeth; Phoenix, Vernon R; Kamenos, Nicholas A; Cusack, Maggie

    2015-02-01

    Ocean acidification (OA) and the resultant changing carbonate saturation states is threatening the formation of calcium carbonate shells and exoskeletons of marine organisms. The production of biominerals in such organisms relies on the availability of carbonate and the ability of the organism to biomineralize in changing environments. To understand how biomineralizers will respond to OA the common blue mussel, Mytilus edulis, was cultured at projected levels of pCO2 (380, 550, 750, 1000 µatm) and increased temperatures (ambient, ambient plus 2°C). Nanoindentation (a single mussel shell) and microhardness testing were used to assess the material properties of the shells. Young's modulus (E), hardness (H) and toughness (KIC) were measured in mussel shells grown in multiple stressor conditions. OA caused mussels to produce shell calcite that is stiffer (higher modulus of elasticity) and harder than shells grown in control conditions. The outer shell (calcite) is more brittle in OA conditions while the inner shell (aragonite) is softer and less stiff in shells grown under OA conditions. Combining increasing ocean pCO2 and temperatures as projected for future global ocean appears to reduce the impact of increasing pCO2 on the material properties of the mussel shell. OA may cause changes in shell material properties that could prove problematic under predation scenarios for the mussels; however, this may be partially mitigated by increasing temperature.

  15. Off-shell Color-Kinematics Duality

    CERN Document Server

    Mastrolia, Pierpaolo; Schubert, Ulrich; Bobadilla, William J Torres

    2015-01-01

    We elaborate on the color-kinematics duality for off-shell diagrams in gauge theories coupled to matter, by investigating the scattering process $gg\\to ss, q\\bar q, gg$, and show that the Jacobi relations for the kinematic numerators of off-shell diagrams, built with Feynman rules in axial gauge, reduces to a color-kinematics violating term due to the contributions of sub-graphs only. Such anomaly vanishes when the four particles connected by the Jacobi relation are on their mass shell with vanishing squared momenta, being either external or cut particles, where the validity of the color-kinematics duality is recovered. We discuss the role of this off-shell decomposition in the direct construction of higher-multiplicity numerators satisfying color-kinematics identity, providing an explicit example for the QCD process $gg\\to q\\bar{q}g$.

  16. Core-shell silicon nanowire solar cells.

    Science.gov (United States)

    Adachi, M M; Anantram, M P; Karim, K S

    2013-01-01

    Silicon nanowires can enhance broadband optical absorption and reduce radial carrier collection distances in solar cell devices. Arrays of disordered nanowires grown by vapor-liquid-solid method are attractive because they can be grown on low-cost substrates such as glass, and are large area compatible. Here, we experimentally demonstrate that an array of disordered silicon nanowires surrounded by a thin transparent conductive oxide has both low diffuse and specular reflection with total values as low as nanowire facilitates enhancement in external quantum efficiency using two different active shell materials: amorphous silicon and nanocrystalline silicon. As a result, the core-shell nanowire device exhibits a short-circuit current enhancement of 15% with an amorphous Si shell and 26% with a nanocrystalline Si shell compared to their corresponding planar devices.

  17. Wear of hard materials by hard particles

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Jeffrey A.

    2003-10-01

    Hard materials, such as WC-Co, boron carbide, titanium diboride and composite carbide made up of Mo2C and WC, have been tested in abrasion and erosion conditions. These hard materials showed negligible wear in abrasion against SiC particles and erosion using Al2O3 particles. The WC-Co materials have the highest wear rate of these hard materials and a very different material removal mechanism. Wear mechanisms for these materials were different for each material with the overall wear rate controlled by binder composition and content and material grain size.

  18. Multiple shells in IRC+10216: shell properties

    Science.gov (United States)

    Mauron, N.; Huggins, P. J.

    2000-07-01

    We report on the properties of the multiple shells in the circumstellar envelope of IRC+10216, using deep optical imaging, including data from the Hubble Space Telescope. The intensity profiles confirm the presence of thin ( ~ 0farcs5 -3'' ec), limb-brightened shells in the envelope, seen in stellar and ambient Galactic light scattered by dust. The shells are spaced at irregular intervals of ~ 5'' ec-20'' ec, corresponding to time scales of 200-800 yr, although intervals as short as ~ 1'' ec (40 yr) are seen close to the star. The location of the main shells shows a good correlation with high-resolution, molecular line maps of the inner envelope, indicating that the dust and gas are well coupled. The shell/intershell density contrast is typically ~ 3, and we find that the shells form the dominant mass component of the circumstellar envelope. The shells exhibit important evolutionary effects: the thickness increases with increasing radius, with an effective dispersion velocity of 0.7 km s-1 and there is evidence for shell interactions. Despite the presence of bipolar structure close to the star, the global shell pattern favors a roughly isotropic, episodic mass loss mechanism, with a range of time scales. Based on observations made with the Canada-France-Hawaii telescope, operated by CNRS, NRCC and UH, and on dearchived observations made with the NASA/ESA Hubble Space Telescope, operated by AURA Inc., under NASA contract NAS5-26555

  19. Growth of Three-Shell Onionlike Bimetallic Nanoparticles

    Science.gov (United States)

    Baletto, F.; Mottet, C.; Ferrando, R.

    2003-04-01

    We show by molecular dynamics simulations on three systems (B/A=Pd/Ag, Cu/Ag, and Ni/Ag) that three-shell metallic nanoparticles made by a core of a metal A, an intermediate shell of metal B and an external shell of metal A (A-B-A nanoparticles) can be grown by deposition of B atoms onto an A core. The growth of the intermediate B shell is triggered by the fact that the most favorable positions for isolated B impurities inside A clusters are located just one layer below the cluster surface.

  20. Stabilization of the resistive shell mode in tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Fitzpatrick, R.; Aydemir, A.

    1995-02-01

    The stability of current-driven external-kink modes is investigated in a tokamak plasma surrounded by an external shell of finite electrical conductivity. According to conventional theory, the ideal mode can be stabilized by placing the shell sufficiently close to the plasma, but the non-rotating ``resistive shell mode,`` which grows on the characteristic L/R time of the shell, always persists. It is demonstrated, using both analytic and numerical techniques, that a combination of strong edge plasma rotation and dissipation somewhere inside the plasma is capable of stabilizing the resistive shell mode. This stabilization mechanism does not necessarily depend on toroidicity or presence of resonant surfaces inside the plasma.

  1. Off-shell helicity amplitudes in high-energy factorization

    CERN Document Server

    van Hameren, Andreas; Kutak, Krzysztof

    2013-01-01

    In the Catani-Ciafaloni-Hautmann high-energy factorization approach a cross section is expressed as a convolution of unintegrated gluon densities and a gauge-invariant hard process, in which two incoming gluons are off-shell with momenta satisfying certain high-energy kinematics. We present two methods of evaluating the tree-level hard process with multiple final states. The first one assumes that only one of the gluons is off-shell and relies on the Slavnov-Taylor identities. Such asymmetric configuration of incoming gluons is phenomenologically important in small x probing by forward processes. The second method deals also with two off-shell gluons and is based on the analytic continuation of the off-shell gluons momenta to the complex space. The methods were implemented into Monte Carlo computer programs and used in phenomenological applications. The results of both methods are straightforwardly related to Lipatov's effective vertices in quasi-multi-regge kinematics.

  2. External Otitis (Swimmer's Ear)

    Science.gov (United States)

    ... to Pneumococcal Vaccine Additional Content Medical News External Otitis (Swimmer's Ear) By Bradley W. Kesser, MD, Associate ... the Outer Ear Ear Blockages Ear Tumors External Otitis (Swimmer's Ear) Malignant External Otitis Perichondritis External otitis ...

  3. Vibration of fluid-loaded hemi-prolate spheroidal shells

    Science.gov (United States)

    Boisvert, Jeffrey E.; Hayek, Sabih I.

    2003-04-01

    The equations of motion for nonaxisymmetric vibration of hemi-prolate spheroidal shells of constant thickness were derived using Hamilton's principle. The shell is clamped at the equator and is excited by mechanical surface force fields. The shell theory used in this derivation includes shear deformations and rotatory inertias. The displacements and rotations were expanded in an infinite series of comparison functions. The shell is fluid-filled and is submerged in an infinite fluid medium. The external and internal fluid loading impedances were computed using expansions of prolate spheroidal wavefunctions in each domain. The dynamic response of the fluid-loaded shell was determined using an axisymmetric normal surface force as the excitation input. Numerical results were obtained for the driving and transfer mobilities for several shell thickness-to-length ratios ranging from 0.005 to 0.1, and for various shape parameters, ``a,'' ranging from an elongated hemi-spheroidal shell (a=1.01) to a hemispherical shell (a=100). Results are presented for various combinations of external and internal fluid loading, and comparisons are made to the in-vacuo shell vibration. [Work supported by ONR and the Navy/ASEE Summer Faculty Program.

  4. Paraboloid Shell As Footing

    OpenAIRE

    Al Ansari, Mohammed S.

    1999-01-01

    A simplified method for the design of paraboloid shell footing base on the displacement of the shell's crown where the column axial load is transferred to the footing has been developed. A case study was presented to demonstrate the use of the proposed method and to illustrate its capabilities. The results of the proposed method confirm the ability of the shell model in determining accurate and practical results for the design of paraboloid shell footing. Base on the analytical results of thi...

  5. Capsules with external navigation and triggered release.

    Science.gov (United States)

    Shchukin, Dmitry G; Shchukina, Elena

    2014-10-01

    Encapsulation is an important technology for pharmaceutical industry, food production, et cetera. Its current level of development requires capsule functionalization. One of the interesting ideas to provide new functionality to the microcapsule and nanocapsule is layer-by-layer deposition of functional species. This technique provides step-by-step adsorption of various species (polyelectrolytes, nanoparticles, proteins) when the layer growth is controlled by electrostatic, hydrogen bonding, hydrophobic forces and forming multilayer shells with nanometer precision. This review article introduces recent achievements of layer-by-layer technique attaining external navigation ability and release properties the capsule shell.

  6. Core-shell particles as model compound for studying fouling

    DEFF Research Database (Denmark)

    Christensen, Morten Lykkegaard; Nielsen, Troels Bach; Andersen, Morten Boel Overgaard;

    2008-01-01

    Synthetic colloidal particles with hard cores and soft, water-swollen shells were used to study cake formation during ultrafiltration. The total cake resistance was lowest for particles with thick shells, which indicates that interparticular forces between particles (steric hindrance...... and electrostatic repulsion) influenced cake formation. At low pressure the specific cake resistance could be predicted from the Kozeny-Carman equation. At higher pressures, the resistance increased due to cake compression. Both cake formation and compression were reversible. For particles with thick shells...... the permeate flux could be enhanced by lowering the pressure. Hence, the amount of water-swollen material influences both cake thickness and resistance....

  7. Hardness Tester for Polyur

    Science.gov (United States)

    Hauser, D. L.; Buras, D. F.; Corbin, J. M.

    1987-01-01

    Rubber-hardness tester modified for use on rigid polyurethane foam. Provides objective basis for evaluation of improvements in foam manufacturing and inspection. Typical acceptance criterion requires minimum hardness reading of 80 on modified tester. With adequate correlation tests, modified tester used to measure indirectly tensile and compressive strengths of foam.

  8. Comprehensive hard materials

    CERN Document Server

    2014-01-01

    Comprehensive Hard Materials deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued res...

  9. Dipolar fluids under external perturbations

    Energy Technology Data Exchange (ETDEWEB)

    Klapp, Sabine H L [Stranski-Laboratorium fuer Physikalische und Theoretische Chemie Sekretariat TC7, Technische Universitaet Berlin, Strasse des 17. Juni 124, D-10623 Berlin (Germany)

    2005-04-20

    We discuss recent developments and present new findings on the structural and phase properties of dipolar model fluids influenced by various external perturbations. We concentrate on systems of spherical particles with permanent (point) dipole moments. Starting from what is known about the three-dimensional systems, particular emphasis is given to dipolar fluids in different confining situations involving both simple and complex (disordered) pore geometries. Further topics concern the effect of quenched positional disorder, the influence of external (electric or magnetic) fields, and the fluid-fluid phase behaviour of various dipolar mixtures. It is demonstrated that due to the translational-orientational coupling and due to the long range of dipolar interactions even simple perturbations such as hard walls can have a profound impact on the systems. (topical review)

  10. Off-shell scattering amplitudes in the double-logarithmic approximation

    CERN Document Server

    Ermolaev, B I; Olness, F; Troyan, S I

    2005-01-01

    When scattering amplitudes are calculated in the double-logarithmic approximation, it is possible to relate the double-logarithmic on-shell and off-shell amplitudes. Explicit relations are obtained for scattering amplitudes in QED, QCD, and the ElectroWeak Standard Model. The off-shell amplitudes are considered in the hard and the Regge kinematic limits. We compare our results in both the Feynman and Coulomb gauges.

  11. Dynamic hardness of metals

    Science.gov (United States)

    Liang, Xuecheng

    Dynamic hardness (Pd) of 22 different pure metals and alloys having a wide range of elastic modulus, static hardness, and crystal structure were measured in a gas pulse system. The indentation contact diameter with an indenting sphere and the radius (r2) of curvature of the indentation were determined by the curve fitting of the indentation profile data. r 2 measured by the profilometer was compared with that calculated from Hertz equation in both dynamic and static conditions. The results indicated that the curvature change due to elastic recovery after unloading is approximately proportional to the parameters predicted by Hertz equation. However, r 2 is less than the radius of indenting sphere in many cases which is contradictory to Hertz analysis. This discrepancy is believed due to the difference between Hertzian and actual stress distributions underneath the indentation. Factors which influence indentation elastic recovery were also discussed. It was found that Tabor dynamic hardness formula always gives a lower value than that directly from dynamic hardness definition DeltaE/V because of errors mainly from Tabor's rebound equation and the assumption that dynamic hardness at the beginning of rebound process (Pr) is equal to kinetic energy change of an impact sphere over the formed crater volume (Pd) in the derivation process for Tabor's dynamic hardness formula. Experimental results also suggested that dynamic to static hardness ratio of a material is primarily determined by its crystal structure and static hardness. The effects of strain rate and temperature rise on this ratio were discussed. A vacuum rotating arm apparatus was built to measure Pd at 70, 127, and 381 mum sphere sizes, these results exhibited that Pd is highly depended on the sphere size due to the strain rate effects. P d was also used to substitute for static hardness to correlate with abrasion and erosion resistance of metals and alloys. The particle size effects observed in erosion were

  12. Spiral Shell Collection

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    In 1988 Zheng Haigen, a seaman with the Towboat Company of the Shanghai Salvage Bureau, began collecting spiral shells. Today he has more than 600 in his collection. The most valuable are the rare parrot shell and a shell whose spirals wind counter-clockwise. In 1991 a miniature conch with a diameter of 0.31 millimeters that he found buried in tons of sand made the Guinness Book of World Records.

  13. Off-Shell Tachyons

    OpenAIRE

    Tang, Yi-Lei

    2015-01-01

    The idea that the new particles invented in some models beyond the standard model can appear only inside the loops is attractive. In this paper, we fill these loops with off-shell tachyons, leading to a solution of the zero results of the loop diagrams involving the off-shell non-tachyonic particles. We also calculate the Passarino-Veltman $A_0^o$ and $B_0^o$ of the off-shell tachyons.

  14. Hardness and excitation energy

    Indian Academy of Sciences (India)

    Á Nagy

    2005-09-01

    The concept of the ensemble Kohn-Sham hardness is introduced. It is shown that the first excitation energy can be given by the Kohn-Sham hardness (i.e. the energy difference of the ground-state lowest unoccupied and highest occupied levels) plus an extra term coming from the partial derivative of the ensemble exchange-correlation energy with respect to the weighting factor in the limit → 0. It is proposed that the first excitation energy can be used as a reactivity index instead of the hardness.

  15. Shell-like structures

    CERN Document Server

    Altenbach, Holm

    2011-01-01

    In this volume, scientists and researchers from industry discuss the new trends in simulation and computing shell-like structures. The focus is put on the following problems: new theories (based on two-dimensional field equations but describing non-classical effects), new constitutive equations (for materials like sandwiches, foams, etc. and which can be combined with the two-dimensional shell equations), complex structures (folded, branching and/or self intersecting shell structures, etc.) and shell-like structures on different scales (for example: nano-tubes) or very thin structures (similar

  16. EXPERIMENTAL STUDIES ON ASEISMIC PERFORMANCE OF T-SHAPE FABRICATED CONCRETE JOINTS WITH PRECAST EXTERNAL SHELL AND CAST-IN-PLACE CORE CONCRETE%外壳预制核心现浇装配式T型钢筋混凝土节点抗震性能试验研究

    Institute of Scientific and Technical Information of China (English)

    张大长; 郭雁; 李布辉

    2013-01-01

    In order to investigate the aseismic performance of fabricated concrete T-shape exterior RC joint with precast external shells and cast-in-place core, one new-type assembled exterior joint and one parallel joint were fabricated, and cyclic loading tests of the T-shape joints were carried out. The aseismic performances were investigated, including failure modes, hysteretic property, ductility, energy dissipation, stiffness degradation. The studies showed that the new-type assembled T-joint had excellent integrity and aseismic performance, similar to those of the cast-in-place RC T-joint, and could meet the aseismic-design requirement of RC frame structure.%该文以研究外壳核心现浇预制装配式钢筋混凝土T型边节点的抗震性能为目的,制作一个新型装配式边节点和一个现浇边节点,开展两个T型节点抗震性能的低周反复试验,考察并分析比较采用两种不同施工方法的T型边节点的破坏形态、滞回特性、位移延性、能量耗散、刚度退化等抗震性能,研究表明新型装配式T型节点与RC现浇T型节点相似,具有良好的整体性和抗震性能,可以满足RC框架结构的抗震设计要求.

  17. Hard probes 2006 Asilomar

    CERN Multimedia

    2006-01-01

    "The second international conference on hard and electromagnetic probes of high-energy nuclear collisions was held June 9 to 16, 2006 at the Asilomar Conference grounds in Pacific Grove, California" (photo and 1/2 page)

  18. OSEFT or how to go beyond hard thermal loops

    CERN Document Server

    Manuel, Cristina; Stetina, Stephan

    2016-01-01

    We show that effective field theory techniques can be applied in the high temperature $T$ regime of plasmas to improve the accuracy of the physics of the hard scales (or scales of order $T$), and as a by-product, also that of the soft scales (or scales of order $gT$). At leading order in the coupling constant the hard scales of the plasma can be viewed as on-shell classical particles. Based on this observation, and without any reference to the state of the system, we derive an effective field theory describing the quantum fluctuations around an on-shell fermion with energy $p$, described as a set of high dimension operators over the on-shell energy $p$. When applied to systems close to thermal equilibrium, where for most on-shell particles $p \\sim T$, we show that the on-shell effective field theory (OSEFT) properly describes the HTL photon polarization tensor of QED, and its 1/T corrections. For the soft scales the first non-vanishing power correction turns out to be a perturbative correction to the HTL resu...

  19. Hard and Soft

    OpenAIRE

    Claes H. de Vreese; Boomgaarden, Hajo G.; Semetko, Holli A.

    2008-01-01

    Abstract Support for European integration is a function no longer only of `hard' economic and utilitarian predictors but also of `soft' predictors such as feelings of identity and attitudes towards immigrants. Focusing on the issue of the potential membership of Turkey in the European Union (EU), this study demonstrates that the importance of `soft' predictors outweighs the role of `hard' predictors in understanding public opinion about Turkish membership. The study draws on survey...

  20. Hollow Pollen Shells to Enhance Drug Delivery

    Directory of Open Access Journals (Sweden)

    Alberto Diego-Taboada

    2014-03-01

    Full Text Available Pollen grain and spore shells are natural microcapsules designed to protect the genetic material of the plant from external damage. The shell is made up of two layers, the inner layer (intine, made largely of cellulose, and the outer layer (exine, composed mainly of sporopollenin. The relative proportion of each varies according to the plant species. The structure of sporopollenin has not been fully characterised but different studies suggest the presence of conjugated phenols, which provide antioxidant properties to the microcapsule and UV (ultraviolet protection to the material inside it. These microcapsule shells have many advantageous properties, such as homogeneity in size, resilience to both alkalis and acids, and the ability to withstand temperatures up to 250 °C. These hollow microcapsules have the ability to encapsulate and release actives in a controlled manner. Their mucoadhesion to intestinal tissues may contribute to the extended contact of the sporopollenin with the intestinal mucosa leading to an increased efficiency of delivery of nutraceuticals and drugs. The hollow microcapsules can be filled with a solution of the active or active in a liquid form by simply mixing both together, and in some cases operating a vacuum. The active payload can be released in the human body depending on pressure on the microcapsule, solubility and/or pH factors. Active release can be controlled by adding a coating on the shell, or co-encapsulation with the active inside the shell.

  1. Molecular dynamics in the isothermal-isobaric ensemble: the requirement of a "shell" molecule. III. Discontinuous potentials.

    Science.gov (United States)

    Uline, Mark J; Corti, David S

    2008-07-07

    Based on the approach of Gruhn and Monson [Phys. Rev. E 63, 061106 (2001)], we present a new method for deriving the collisions dynamics for particles that interact via discontinuous potentials. By invoking the conservation of the extended Hamiltonian, we generate molecular dynamics (MD) algorithms for simulating the hard-sphere and square-well fluids within the isothermal-isobaric (NpT) ensemble. Consistent with the recent rigorous reformulation of the NpT ensemble partition function, the equations of motion impose a constant external pressure via the introduction of a shell particle of known mass [M. J. Uline and D. S. Corti, J. Chem. Phys. 123, 164101 (2005); 123, 164102 (2005)], which serves to define uniquely the volume of the system. The particles are also connected to a temperature reservoir through the use of a chain of Nose-Hoover thermostats, the properties of which are not affected by a hard-sphere or square-well collision. By using the Liouville operator formalism and the Trotter expansion theorem to integrate the equations of motion, the update of the thermostat variables can be decoupled from the update of the positions of the particles and the momentum changes upon a collision. Hence, once the appropriate collision dynamics for the isobaric-isenthalpic (NpH) equations of motion is known, the adaptation of the algorithm to the NpT ensemble is straightforward. Results of MD simulations for the pure component square-well fluid are presented and serve to validate our algorithm. Finally, since the mass of the shell particle is known, the system itself, and not a piston of arbitrary mass, controls the time scales for internal pressure and volume fluctuations. We therefore consider the influence of the shell particle algorithm on the dynamics of the square-well fluid.

  2. Relativistic dynamics of cylindrical shells of counter-rotating particles

    CERN Document Server

    Hamity, V H; Barraco, D E

    2007-01-01

    Although infinite cylinders are not astrophysical entities, it is possible to learn a great deal about the basic qualitative features of generation of gravitational waves and the behavior of the matter conforming such shells in the limits of very small radius. We describe the analytical model using kinetic theory for the matter and the junction conditions through the shell to obtain its equation of motion. The nature of the static solutions are analyzed, both for a single shell as well as for two concentric shells. In this second case, for a time dependent external shell, we integrate numerically the equation of motion for several values of the constants of the system. Also, a brief description in terms of the Komar mass is given to account for the gravitational wave energy emitted by the system.

  3. Low-Q whispering gallery modes in anisotropic metamaterial shells

    CERN Document Server

    Díaz-Rubio, Ana; Torrent, Daniel; Sánchez-Dehesa, José

    2013-01-01

    Anisotropic and inhomogeneous metamaterial shells are studied in order to exploit all their resonant mode richness. These multilayer structures are based on a cylindrical distribution of radially dependent constitutive parameters including an inner void cavity. Shell, cavity and whispering gallery modes are characterized, and special attention is paid to the latter ones. The whispering gallery modes are created at the boundary layers of the shell with the background and energy localization is produced with highly radiative characteristics. These low-Q resonant states have frequencies that are independent of the shell thickness. However, their quality factors can be controlled by the number of layers forming the shell, which allows confining electromagnetic waves at the interface layers (internal or external), and make them suitable for the harvesting of electromagnetic energy.

  4. Hardness amplification in nondeterministic logspace

    OpenAIRE

    Gupta, Sushmita

    2007-01-01

    A hard problem is one which cannot be easily computed by efficient algorithms. Hardness amplification is a procedure which takes as input a problem of mild hardness and returns a problem of higher hardness. This is closely related to the task of decoding certain error-correcting codes. We show amplification from mild average case hardness to higher average case hardness for nondeterministic logspace and worst-to-average amplification for nondeterministic linspace. Finally we explore possible ...

  5. A novel approach to thin-shell wormholes and applications

    CERN Document Server

    Lobo, Francisco S N; Martín-Moruno, Prado; Montelongo-García, Nadiezhda; Visser, Matt

    2015-01-01

    A novel framework is presented that can be adapted to a wide class of generic spherically symmetric thin-shell wormholes. By using the Darmois--Israel formalism, we analyze the stability of arbitrary spherically symmetric thin-shell wormholes to linearized perturbations around static solutions. We demonstrate in full generality that the stability of the wormhole is equivalent to choosing suitable properties for the exotic material residing on the wormhole throat. As an application, we consider the thin-shell variant of the Ellis wormhole for the cases of a vanishing momentum flux and non-zero external fluxes.

  6. The External Degree.

    Science.gov (United States)

    Houle, Cyril O.

    This book examines the external degree in relation to the extremes of attitudes, myths, and data. Emphasis is placed on the emergence of the American external degree, foreign external-degree programs, the purpose of the external degree, the current scene, institutional issues, and problems of general policy. (MJM)

  7. An effective theory on the light shell

    Science.gov (United States)

    Sajjad, Aqil

    We describe work on the construction of an effective field theory on a spherical light shell. The motivation arises from classical electromagnetism: If a collision produces charged particles with zero net charge emerging simultaneously from a point and instantaneously accelerating to the speed of light, then the electromagnetic fields due to these charges lie entirely on a spherical shell expanding at the speed of light. We show that this also applies to classical color radiation from high-energy collisions that produce colored particles. Specifically, the color fields produced in such a process are associated with a non-linear sigma-model on the 2D light shell with specific symmetry-breaking terms. The quantum version of such a picture exhibits asymptotic freedom and should therefore be a useful starting point for a light-shell effective theory for QCD. We start in the simplified context of zero-flavor scalar quantum electrodynamics. Our effective theory has 3 major ingredients: breaking down the fields into soft and hard sectors with the large energy of the hard fields in the radial direction scaled out, a special gauge called light-shell gauge in which the picture simplifies, and a gauge-invariant source defined on a spherical light shell having infinitesimal radius. We match the fields between the effective theory and the full theory, meaning zero-flavor scalar QED. This allows us to compute the amplitude for the production of any number of scalars from the gauge-invariant source. We then find the tree-level amplitude for the emission of a photon using our effective theory and show that our result agrees with the full theory. To calculate loop effects in our effective theory, we need the photon propagator in light-shell gauge. We derive this propagator and use it to calculate the 1-loop correction to the amplitude for the production of a scalar and anti-scalar pair arising from virtual photon effects. This reduces to a pair of purely angular integrals in the

  8. Chemical Component and Proteomic Study of the Amphibalanus (= Balanus amphitrite Shell.

    Directory of Open Access Journals (Sweden)

    Gen Zhang

    Full Text Available As typical biofoulers, barnacles possess hard shells and cause serious biofouling problems. In this study, we analyzed the protein component of the barnacle Amphibalanus (= Balanus amphitrite shell using gel-based proteomics. The results revealed 52 proteins in the A. Amphitrite shell. Among them, 40 proteins were categorized into 11 functional groups based on KOG database, and the remaining 12 proteins were unknown. Besides the known proteins in barnacle shell (SIPC, carbonic anhydrase and acidic acid matrix protein, we also identified chorion peroxidase, C-type lectin-like domains, serine proteases and proteinase inhibitor proteins in the A. Amphitrite shell. The sequences of these proteins were characterized and their potential functions were discussed. Histology and DAPI staining revealed living cells in the shell, which might secrete the shell proteins identified in this study.

  9. Analysis on Forced Vibration of Thin-Wall Cylindrical Shell with Nonlinear Boundary Condition

    Directory of Open Access Journals (Sweden)

    Qiansheng Tang

    2016-01-01

    Full Text Available Forced vibration of thin-wall cylindrical shell under nonlinear boundary condition was discussed in this paper. The nonlinear boundary was modeled as supported clearance in one end of shell and the restraint was assumed as linearly elastic in the radial direction. Based on Sanders’ shell theory, Lagrange equation was utilized to derive the nonlinear governing equations of cylindrical shell. The displacements in three directions were represented by beam functions and trigonometric functions. In the study of nonlinear dynamic responses of thin-wall cylindrical shell with supported clearance under external loads, the Newmark method is used to obtain time history, frequency spectrum plot, phase portraits, Poincare section, bifurcation diagrams, and three-dimensional spectrum plot with different parameters. The effects of external loads, supported clearance, and support stiffness on nonlinear dynamics behaviors of cylindrical shell with nonlinear boundary condition were discussed.

  10. Free volume distribution of nearly jammed hard sphere packings

    Science.gov (United States)

    Maiti, Moumita; Sastry, Srikanth

    2014-07-01

    We calculate the free volume distributions of nearly jammed packings of monodisperse and bidisperse hard sphere configurations. These distributions differ qualitatively from those of the fluid, displaying a power law tail at large free volumes, which constitutes a distinct signature of nearly jammed configurations, persisting for moderate degrees of decompression. We reproduce and explain the observed distribution by considering the pair correlation function within the first coordination shell for jammed hard sphere configurations. We analyze features of the equation of state near jamming, and discuss the significance of observed asphericities of the free volumes to the equation of state.

  11. Hard and superhard nanocomposite coatings

    Energy Technology Data Exchange (ETDEWEB)

    Musil, J. [Univ. of West Bohemia, Plzen (Czech Republic). Dept. of Phys.

    2000-03-01

    This article reviews the development of hard coatings from a titanium nitride film through superlattice coatings to nanocomposite coatings. Significant attention is devoted to hard and superhard single layer nanocomposite coatings. A strong correlation between the hardness and structure of nanocomposite coatings is discussed in detail. Trends in development of hard nanocomposite coatings are also outlined. (orig.)

  12. Session: Hard Rock Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Tennyson, George P. Jr.; Dunn, James C.; Drumheller, Douglas S.; Glowka, David A.; Lysne, Peter

    1992-01-01

    This session at the Geothermal Energy Program Review X: Geothermal Energy and the Utility Market consisted of five presentations: ''Hard Rock Penetration - Summary'' by George P. Tennyson, Jr.; ''Overview - Hard Rock Penetration'' by James C. Dunn; ''An Overview of Acoustic Telemetry'' by Douglas S. Drumheller; ''Lost Circulation Technology Development Status'' by David A. Glowka; ''Downhole Memory-Logging Tools'' by Peter Lysne.

  13. Hard-hat day

    CERN Multimedia

    2003-01-01

    CERN will be organizing a special information day on Friday, 27th June, designed to promote the wearing of hard hats and ensure that they are worn correctly. A new prevention campaign will also be launched.The event will take place in the hall of the Main Building from 11.30 a.m. to 2.00 p.m., when you will be able to come and try on various models of hard hat, including some of the very latest innovative designs, ask questions and pass on any comments and suggestions.

  14. Hardness of metallic crystals

    Indian Academy of Sciences (India)

    Wuhui Li; Fengzhang Ren; Juanhua Su; Zhanhong Ma; Ke Cao; Baohong Tian

    2011-07-01

    This paper presents a new formula for calculating the hardness of metallic crystals, resulted from the research on the critical grain size with stable dislocations. The formula is = 6 /[(1 – )], where is the hardness, the coefficient, the shear modulus, the Poisson’s ratio, a function of the radius of an atom () and the electron density at the atom interface (). The formula will not only be used to testify the critical grain size with stable dislocations, but also play an important role in the understanding of mechanical properties of nanocrystalline metals.

  15. Hard exclusive QCD processes

    Energy Technology Data Exchange (ETDEWEB)

    Kugler, W.

    2007-01-15

    Hard exclusive processes in high energy electron proton scattering offer the opportunity to get access to a new generation of parton distributions, the so-called generalized parton distributions (GPDs). This functions provide more detailed informations about the structure of the nucleon than the usual PDFs obtained from DIS. In this work we present a detailed analysis of exclusive processes, especially of hard exclusive meson production. We investigated the influence of exclusive produced mesons on the semi-inclusive production of mesons at fixed target experiments like HERMES. Further we give a detailed analysis of higher order corrections (NLO) for the exclusive production of mesons in a very broad range of kinematics. (orig.)

  16. Regulating multiple externalities

    DEFF Research Database (Denmark)

    Waldo, Staffan; Jensen, Frank; Nielsen, Max

    2016-01-01

    Open access is a well-known externality problem in fisheries causing excess capacity and overfishing. Due to global warming, externality problems from CO2 emissions have gained increased interest. With two externality problems, a first-best optimum can be achieved by using two regulatory instrume......Open access is a well-known externality problem in fisheries causing excess capacity and overfishing. Due to global warming, externality problems from CO2 emissions have gained increased interest. With two externality problems, a first-best optimum can be achieved by using two regulatory...

  17. ExternE National Implementation Finland

    Energy Technology Data Exchange (ETDEWEB)

    Pingoud, K.; Maelkki, H.; Wihersaari, M.; Pirilae, P. [VTT Energy, Espoo (Finland); Hongisto, M. [Imatran Voima Oy, Vantaa (Finland); Siitonen, S. [Ekono Energy Ltd, Espoo (Finland); Johansson, M. [Finnish Environment Institute, Helsinki (Finland)

    1999-07-01

    ExternE National Implementation is a continuation of the ExternE Project, funded in part by the European Commission's Joule III Programme. This study is the result of the ExternE National Implementation Project for Finland. Three fuel cycles were selected for the Finnish study: coal, peat and wood-derived biomass, which together are responsible for about 40% of total electricity generation in Finland and about 75% of the non-nuclear fuel based generation. The estimated external costs or damages were dominated by the global warming (GW) impacts in the coal and peat fuel cycles, but knowledge of the true GW impacts is still uncertain. From among other impacts that were valued in monetary terms the human health damages due to airborne emissions dominated in all the three fuel cycles. Monetary valuation for ecosystem impacts is not possible using the ExternE methodology at present. The Meri-Pori power station representing the coal fuel cycle is one of the world's cleanest and most efficient coal-fired power plants with a condensing turbine. The coal is imported mainly from Poland. The estimated health damages were about 4 mECU/kWh, crop damages an order of magnitude lower and damages caused to building materials two orders of magnitude lower. The power stations of the peat and biomass fuel cycles are of CHP type, generating electricity and heat for the district heating systems of two cities. Their fuels are of domestic origin. The estimated health damages allocated to electricity generation were about 5 and 6 mECU/kWh, respectively. The estimates were case-specific and thus an generalisation of the results to the whole electricity generation in Finland is unrealistic. Despite the uncertainties and limitations of the methodology, it is a promising tool in the comparison of similar kinds of fuel cycles, new power plants and pollution abatement technologies and different plant locations with each other. (orig.)

  18. Emulsion preparation for novel micro-porous polymeric hemi-shells

    CSIR Research Space (South Africa)

    Naidoo, Kersch

    2008-01-01

    Full Text Available -dichloromethane (DCM) oil phase and emulsification in an acidic polyvinyl alcohol (PVA) aqueous phase, micro-porous hemi-shells formed as solvent evaporated. CO2 gas evolution from the porogen created particles with an externally micro-porous shell and a large internal...

  19. Validation of the seasonality in growth lines in the shell of

    NARCIS (Netherlands)

    Cardoso, J.F.M.F.; Santos, S.; Witte, J.IJ.; Witbaard, R.; van der Veer, H.W.; Machado, J.P.

    2013-01-01

    Individual age is a key parameter when studying population dynamics of a species. However, accurate age determination in bivalve shells is not always straightforward due to the difficulty of using external growth lines on the shell surface as a reliable method to identify annual growth patterns. In

  20. CSI: Hard Drive

    Science.gov (United States)

    Sturgeon, Julie

    2008-01-01

    Acting on information from students who reported seeing a classmate looking at inappropriate material on a school computer, school officials used forensics software to plunge the depths of the PC's hard drive, searching for evidence of improper activity. Images were found in a deleted Internet Explorer cache as well as deleted file space.…

  1. Hard Probes at ATLAS

    CERN Document Server

    Citron, Z; The ATLAS collaboration

    2014-01-01

    The ATLAS collaboration has measured several hard probe observables in Pb+Pb and p+Pb collisions at the LHC. These measurements include jets which show modification in the hot dense medium of heavy ion collisions as well as color neutral electro-weak bosons. Together, they elucidate the nature of heavy ion collisions.

  2. Rock-hard coatings

    NARCIS (Netherlands)

    Muller, M.

    2007-01-01

    Aircraft jet engines have to be able to withstand infernal conditions. Extreme heat and bitter cold tax coatings to the limit. Materials expert Dr Ir. Wim Sloof fits atoms together to develop rock-hard coatings. The latest invention in this field is known as ceramic matrix composites. Sloof has sign

  3. Budgeting in Hard Times.

    Science.gov (United States)

    Parrino, Frank M.

    2003-01-01

    Interviews with school board members and administrators produced a list of suggestions for balancing a budget in hard times. Among these are changing calendars and schedules to reduce heating and cooling costs; sharing personnel; rescheduling some extracurricular activities; and forming cooperative agreements with other districts. (MLF)

  4. Hard and Soft Governance

    DEFF Research Database (Denmark)

    Moos, Lejf

    2009-01-01

    The governance and leadership at transnational, national and school level seem to be converging into a number of isomorphic forms as we see a tendency towards substituting 'hard' forms of governance, that are legally binding, with 'soft' forms based on persuasion and advice. This article analyses...

  5. Running in Hard Times

    Science.gov (United States)

    Berry, John N., III

    2009-01-01

    Roberta Stevens and Kent Oliver are campaigning hard for the presidency of the American Library Association (ALA). Stevens is outreach projects and partnerships officer at the Library of Congress. Oliver is executive director of the Stark County District Library in Canton, Ohio. They have debated, discussed, and posted web sites, Facebook pages,…

  6. Hard times; Schwere Zeiten

    Energy Technology Data Exchange (ETDEWEB)

    Grunwald, Markus

    2012-10-02

    The prices of silicon and solar wafers keep dropping. According to market research specialist IMS research, this is the result of weak traditional solar markets and global overcapacities. While many manufacturers are facing hard times, big producers of silicon are continuing to expand.

  7. Elastic platonic shells.

    Science.gov (United States)

    Yong, Ee Hou; Nelson, David R; Mahadevan, L

    2013-10-25

    On microscopic scales, the crystallinity of flexible tethered or cross-linked membranes determines their mechanical response. We show that by controlling the type, number, and distribution of defects on a spherical elastic shell, it is possible to direct the morphology of these structures. Our numerical simulations show that by deflating a crystalline shell with defects, we can create elastic shell analogs of the classical platonic solids. These morphologies arise via a sharp buckling transition from the sphere which is strongly hysteretic in loading or unloading. We construct a minimal Landau theory for the transition using quadratic and cubic invariants of the spherical harmonic modes. Our approach suggests methods to engineer shape into soft spherical shells using a frozen defect topology.

  8. Containment atmosphere response to external sprays

    Energy Technology Data Exchange (ETDEWEB)

    Green, J.; Almenas, K. [Univ. of Maryland, College Park, MD (United States)

    1995-09-01

    The application of external sprays to a containment steel shell can be an effective energy removal method and has been proposed in the passive AP-600 design. Reduction of the steel shell temperature in contact with the containment atmosphere enhances both heat and mass transfer driving forces. Large scale experimental data in this area is scarce, therefore the measurements obtained from the E series tests conducted at the German HDR facility deserve special attention. These long term tests simulated various severe accident conditions, including external spraying of the hemispherical steel shell. This investigation focuses upon the integral response of the HDR containment atmosphere during spray periods and upon methods by which lumped parameter system codes, like CONTAIN, model the underlying condensation phenomena. Increases in spray water flowrates above a minimum value were ineffective at improving containment pressure reduction since the limiting resistance for energy transfer lies in the noncondensable-vapor boundary layer at the inner condensing surface. The spray created an unstable condition by cooling the upper layers of a heated atmosphere and thus inducing global natural circulation flows in the facility and subsequently, abrupt changes in lighter-than-air noncondensable (J{sub 2}/He) concentrations. Modeling results using the CONTAIN code are outlined and code limitations are delineated.

  9. ASH External Web Portal (External Portal) -

    Data.gov (United States)

    Department of Transportation — The ASH External Web Portal is a web-based portal that provides single sign-on functionality, making the web portal a single location from which to be authenticated...

  10. Dynamic Analysis of Shells

    Directory of Open Access Journals (Sweden)

    Charles R. Steele

    1995-01-01

    Full Text Available Shell structures are indispensable in virtually every industry. However, in the design, analysis, fabrication, and maintenance of such structures, there are many pitfalls leading to various forms of disaster. The experience gained by engineers over some 200 years of disasters and brushes with disaster is expressed in the extensive archival literature, national codes, and procedural documentation found in larger companies. However, the advantage of the richness in the behavior of shells is that the way is always open for innovation. In this survey, we present a broad overview of the dynamic response of shell structures. The intention is to provide an understanding of the basic themes behind the detailed codes and stimulate, not restrict, positive innovation. Such understanding is also crucial for the correct computation of shell structures by any computer code. The physics dictates that the thin shell structure offers a challenge for analysis and computation. Shell response can be generally categorized by states of extension, inextensional bending, edge bending, and edge transverse shear. Simple estimates for the magnitudes of stress, deformation, and resonance in the extensional and inextensional states are provided by ring response. Several shell examples demonstrate the different states and combinations. For excitation frequency above the extensional resonance, such as in impact and acoustic excitation, a fine mesh is needed over the entire shell surface. For this range, modal and implicit methods are of limited value. The example of a sphere impacting a rigid surface shows that plastic unloading occurs continuously. Thus, there are no short cuts; the complete material behavior must be included.

  11. LC and ferromagnetic resonance in soft/hard magnetic microwires

    Science.gov (United States)

    Tian, Bin; Vazquez, Manuel

    2015-12-01

    The magnetic behavior of soft/hard biphase microwires is introduced here. The microwires consist of a Co59.1Fe14.8Si10.2B15.9 soft magnetic nucleus and a Co90Ni10 hard outer shell separated by an intermediate insulating Pyrex glass microtube. By comparing the resistance spectrums of welding the ends of metallic core (CC) or welding the metallic core and outer shell (CS) to the connector, it is found that one of the two peaks in the resistance spectrum is because the LC resonance depends on the inductor and capacitors in which one is the capacitor between the metallic core and outer shell, and the other is between the outer shell and connector. Correspondingly, another peak is for the ferromagnetic resonance of metallic core. After changing the capacitance of the capacitors, the frequency of LC resonance moves to high frequency band, and furthermore, the peak of LC resonance in the resistance spectrum disappeared. These magnetostatically coupled biphase systems are thought to be of large potential interest as sensing elements in sensor devices.

  12. Simulations of driven overdamped frictionless hard spheres

    Science.gov (United States)

    Lerner, Edan; Düring, Gustavo; Wyart, Matthieu

    2013-03-01

    We introduce an event-driven simulation scheme for overdamped dynamics of frictionless hard spheres subjected to external forces, neglecting hydrodynamic interactions. Our event-driven approach is based on an exact equation of motion which relates the driving force to the resulting velocities through the geometric information characterizing the underlying network of contacts between the hard spheres. Our method allows for a robust extraction of the instantaneous coordination of the particles as well as contact force statistics and dynamics, under any chosen driving force, in addition to shear flow and compression. It can also be used for generating high-precision jammed packings under shear, compression, or both. We present a number of additional applications of our method.

  13. Effects of alga polysaccharide capsule shells on in-vivo bioavailability and disintegration

    Institute of Scientific and Technical Information of China (English)

    LI Ting; GUO Shuju; MA Lin; YUAN Yi; HAN Lijun

    2012-01-01

    Gelatin has been used in hard capsule shells for more than a century,and some shortcomings have appeared,such as high moisture content and risk of transmitting diseases of animal origin to people.Based on available studies regarding gelatin and vegetable shells,we developed a new type of algal polysaccharide capsule (APPC) shells.To test whether our products can replace commercial gelatin shells,we measured in-vivo plasma concentration of 12 selected volunteers with a model drug,ibuprofen,using high performance liquid chromatography (HPLC),by calculating the relative bioavailability of APPC and Qualicaps(R) referenced to gelatin capsules and assessing bioequivalence of the three types of shells,and calculated pharmacokinetic parameters with the software DAS 2.0 (China).The results show that APPC shells possess bioequivalence with Qualicaps(R) and gelatin shells.Moreover,the disintegration behavior of four types of shells (APPC,Vegcaps(R),Qualicaps(R) and gelatin shells) with the content of lactose and radioactive element (99mTc) was observed via gamma-scintigraphic images.The bioavailability and gamma-scintigraphic studies showed that APPC was not statistically different from other vegetable and gelatin capsule shells with respect to in-vivo behavior.Hence,it can be concluded that APPCs are exchangeable with other vegetable and gelatin shells.

  14. Effects of alga polysaccharide capsule shells on in-vivo bioavailability and disintegration

    Science.gov (United States)

    Li, Ting; Guo, Shuju; Ma, Lin; Yuan, Yi; Han, Lijun

    2012-01-01

    Gelatin has been used in hard capsule shells for more than a century, and some shortcomings have appeared, such as high moisture content and risk of transmitting diseases of animal origin to people. Based on available studies regarding gelatin and vegetable shells, we developed a new type of algal polysaccharide capsule (APPC) shells. To test whether our products can replace commercial gelatin shells, we measured in-vivo plasma concentration of 12 selected volunteers with a model drug, ibuprofen, using high performance liquid chromatography (HPLC), by calculating the relative bioavailability of APPC and Qualicaps® referenced to gelatin capsules and assessing bioequivalence of the three types of shells, and calculated pharmacokinetic parameters with the software DAS 2.0 (China). The results show that APPC shells possess bioequivalence with Qualicaps® and gelatin shells. Moreover, the disintegration behavior of four types of shells (APPC, Vegcaps®, Qualicaps® and gelatin shells) with the content of lactose and radioactive element (99mTc) was observed via gamma-scintigraphic images. The bioavailability and gamma-scintigraphic studies showed that APPC was not statistically different from other vegetable and gelatin capsule shells with respect to in-vivo behavior. Hence, it can be concluded that APPCs are exchangeable with other vegetable and gelatin shells.

  15. On stability cylindrical shell with a viscoelastic core

    OpenAIRE

    2013-01-01

    Stability of cylindrical shell with a viscoelastic core is investigated under action both of external uniform pressure and constant temperature field. Core effect is modelled by means of Winkler formula. Besides of instant and prolonged critical parameters, the instability critical time are defined.

  16. Superconducting Sphere in an External Magnetic Field Revisited

    Science.gov (United States)

    Sazonov, Sergey N.

    2013-01-01

    The purpose of this article is to give the intelligible procedure for undergraduate students to grasp proof of the fact that the magnetic field outside the hollow superconducting sphere (superconducting shell) coincides with the field of a point magnetic dipole both when an uniform external magnetic field is applied as when a ferromagnetic sphere…

  17. Multi-Shell Hollow Nanogels with Responsive Shell Permeability.

    Science.gov (United States)

    Schmid, Andreas J; Dubbert, Janine; Rudov, Andrey A; Pedersen, Jan Skov; Lindner, Peter; Karg, Matthias; Potemkin, Igor I; Richtering, Walter

    2016-03-17

    We report on hollow shell-shell nanogels with two polymer shells that have different volume phase transition temperatures. By means of small angle neutron scattering (SANS) employing contrast variation and molecular dynamics (MD) simulations we show that hollow shell-shell nanocontainers are ideal systems for controlled drug delivery: The temperature responsive swelling of the inner shell controls the uptake and release, while the thermoresponsive swelling of the outer shell controls the size of the void and the colloidal stability. At temperatures between 32 °C shell. Computer simulations showed, that temperature induced switching of the permeability of the inner shell allows for the encapsulation in and release of molecules from the cavity.

  18. Theory of hard photoproduction

    OpenAIRE

    Klasen, Michael

    2002-01-01

    The present theoretical knowledge about photons and hard photoproduction processes, i.e. the production of jets, light and heavy hadrons, quarkonia, and prompt photons in photon-photon and photon-hadron collisions, is reviewed. Virtual and polarized photons and prompt photon production in hadron collisions are also discussed. The most important leading and next-to-leading order QCD results are compiled in analytic form. A large variety of numerical predictions is compared to data from TRISTAN...

  19. SUPER HARD SURFACED POLYMERS

    Energy Technology Data Exchange (ETDEWEB)

    Mansur, Louis K [ORNL; Bhattacharya, R [UES, Incorporated, Dayton, OH; Blau, Peter Julian [ORNL; Clemons, Art [ORNL; Eberle, Cliff [ORNL; Evans, H B [UES, Incorporated, Dayton, OH; Janke, Christopher James [ORNL; Jolly, Brian C [ORNL; Lee, E H [Consultant, Milpitas, CA; Leonard, Keith J [ORNL; Trejo, Rosa M [ORNL; Rivard, John D [ORNL

    2010-01-01

    High energy ion beam surface treatments were applied to a selected group of polymers. Of the six materials in the present study, four were thermoplastics (polycarbonate, polyethylene, polyethylene terephthalate, and polystyrene) and two were thermosets (epoxy and polyimide). The particular epoxy evaluated in this work is one of the resins used in formulating fiber reinforced composites for military helicopter blades. Measures of mechanical properties of the near surface regions were obtained by nanoindentation hardness and pin on disk wear. Attempts were also made to measure erosion resistance by particle impact. All materials were hardness tested. Pristine materials were very soft, having values in the range of approximately 0.1 to 0.5 GPa. Ion beam treatment increased hardness by up to 50 times compared to untreated materials. For reference, all materials were hardened to values higher than those typical of stainless steels. Wear tests were carried out on three of the materials, PET, PI and epoxy. On the ion beam treated epoxy no wear could be detected, whereas the untreated material showed significant wear.

  20. Structural and Acoustic Responses of a Submerged Stiffened Conical Shell

    Directory of Open Access Journals (Sweden)

    Meixia Chen

    2014-01-01

    Full Text Available This paper studies the vibrational behavior and far-field sound radiation of a submerged stiffened conical shell at low frequencies. The solution for the dynamic response of the conical shell is presented in the form of a power series. A smeared approach is used to model the ring stiffeners. Fluid loading is taken into account by dividing the conical shell into narrow strips which are considered to be local cylindrical shells. The far-field sound pressure is solved by the Element Radiation Superposition Method. Excitations in two directions are considered to simulate the loading on the surface of the conical shell. These excitations are applied along the generator and normal to the surface of the conical shell. The contributions from the individual circumferential modes on the structural responses of the conical shell are studied. The effects of the external fluid loading and stiffeners are discussed. The results from the analytical models are validated by numerical results from a fully coupled finite element/boundary element model.

  1. Axisymmetric acoustic scattering from submerged prolate spheroidal shells

    Science.gov (United States)

    Boisvert, Jeffrey E.; Hayek, Sabih I.

    2005-09-01

    The equations of motion for nonaxisymmetric vibration of prolate spheroidal shells of constant thickness were derived using Hamilton's principle [S. I. Hayek and J. E. Boisvert, J. Acoust. Soc. Am. 114, 2799-2811 (2003)]. The shell theory used in this derivation includes shear deformations and rotatory inertias. The shell displacements and rotations were expanded in infinite series of comparison functions. These include associated Legendre functions in terms of the prolate spheroidal angular coordinate and circular functions in the azimuthal angle coordinate. The shell is insonified by a plane wave incident along the major axis. The external (heavy) fluid loading impedance was computed using an eigenfunction expansion of prolate spheroidal wavefunctions. Far-field scattered acoustic pressure spectra are presented for several shell thickness-to-half-length ratios ranging from 0.005 to 0.1, and for various shape parameters, a, ranging from an elongated spheroidal shell (a=1.01) to a spherical shell (a~100). The far-field directivity of acoustic scattering is presented at selected frequencies. [Work supported by the ONR/ASEE Summer Faculty Research Program.

  2. From shell logs to shell scripts

    OpenAIRE

    Jacobs, Nico; Blockeel, Hendrik

    2001-01-01

    Analysing the use of a Unix command shell is one of the classic applications in the domain of adaptive user interfaces and user modelling. Instead of trying to predict the next command from a history of commands, we automatically produce scripts that automate frequent tasks. For this we use an ILP association rule learner. We show how to speedup the learning task by dividing it into smaller tasks, and the need for a preprocessing phase to detect frequent subsequences in the data. We illustrat...

  3. Method to calculate interior sound field of arbitrary-shaped closed thin shell

    Institute of Scientific and Technical Information of China (English)

    WU Jiuhui; CHEN Hualing; HU Xuanli

    2001-01-01

    The concept of covering-domain means that an arbitrary-shaped closed shell can be approached by a series of closed spherical shells. Based on it, the interior scattering sound field of the arbitrary-shaped closed shell is given. According to the reciprocity theory, the radiating sound field of the elastic surface due to the action of external force is presented. The method presented can also be used to calculate the interior sound fields of arbitraryshaped closed thin shells of which the thickness are either equal or unequal. It is verified to be correct by corresponding test.

  4. Sensational spherical shells

    Science.gov (United States)

    Lee, M. C.; Kendall, J. M., Jr.; Bahrami, P. A.; Wang, T. G.

    1986-01-01

    Fluid-dynamic and capillary forces can be used to form nearly perfect, very small spherical shells when a liquid that can solidify is passed through an annular die to form an annular jet. Gravity and certain properties of even the most ideal materials, however, can cause slight asymmetries. The primary objective of the present work is the control of this shell formation process in earth laboratories rather than space microgravity, through the development of facilities and methods that minimize the deleterious effects of gravity, aerodynamic drag, and uncontrolled cooling. The spherical shells thus produced can be used in insulation, recyclable filter materials, fire retardants, explosives, heat transport slurries, shock-absorbing armor, and solid rocket motors.

  5. LOW-FREQUENCY MAGNETIC FIELD SHIELDING BY A CIRCULAR PASSIVE LOOP AND CLOSED SHELLS

    Directory of Open Access Journals (Sweden)

    V.S. Grinchenko

    2016-05-01

    Full Text Available Purpose. To analyze the shielding factors for a circular passive loop and conductive closed shells placed in a homogeneous low-frequency magnetic field. Methodology. We have obtained simplified expressions for the shielding factors for a circular passive loop and a thin spherical shell. In addition, we have developed the numerical model of a thin cubical shell in a magnetic field, which allows exploring its shielding characteristics. Results. We have obtained dependences of the shielding factors for passive loops and shells on the frequency of the external field. Analytically determined frequency of the external magnetic field, below which field shielding of a passive loop is expedient to use, above which it is advisable to use a shielding shell.

  6. External radiation surveillance

    Energy Technology Data Exchange (ETDEWEB)

    Antonio, E.J.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report describes how external radiation was measured, how surveys were performed, and the results of these measurements and surveys. External radiation exposure rates were measured at locations on and off the Hanford Site using thermoluminescent dosimeters (TLD). External radiation and contamination surveys were also performed with portable radiation survey instruments at locations on and around the Hanford Site.

  7. Theory of hard photoproduction

    Energy Technology Data Exchange (ETDEWEB)

    Klasen, M. [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

    2002-06-01

    The present theoretical knowledge about photons and hard photoproduction processes, i.e. the production of jets, light and heavy hadrons, quarkonia, and prompt photons in photon-photon and photon-hadron collisions, is reviewed. Virtual and polarized photons and prompt photon production in hadron collisions are also discussed. The most important leading and next-to-leading order QCD results are compiled in analytic form. A large variety of numerical predictions is compared to data from TRISTAN, LEP, and HERA and extended to future electron and muon colliders. The sources of all relevant results are collected in a rich bibliography. (orig.)

  8. Entropic repulsion of an interface in an external field

    OpenAIRE

    Velenik, Yvan Alain

    2004-01-01

    We consider an interface above an attractive hard wall in the complete wetting regime, and submitted to the action of an external increasing, convex potential, and study its delocalization as the intensity of this potential vanishes. Our main motivation is the analysis of critical prewetting, which corresponds to the choice of a linear external potential. We also present partial results on critical prewetting in the two dimensional Ising model, as well as a few (weak) results on pathwise esti...

  9. Confirmation Tests of Hot and Cold Artillery Shell Drawing Operations

    Science.gov (United States)

    1979-05-01

    is often necessary be- tween the initial and the final draw. Prior to cold drawing, the shell body is pickle -cleaned, phosphated and lubricated with...other hard-tool materials, such as titanium carbide. Although die wear normally is not a serious problem, punch breakage commonly occurs due to poor...operarion, both inside and outside of the preform 13 is pickle -cleaied, phosphatad aud lubricated with a commercial soap. In the present investigation

  10. Axisymmetric bifurcations of thick spherical shells under inflation and compression

    KAUST Repository

    deBotton, G.

    2013-01-01

    Incremental equilibrium equations and corresponding boundary conditions for an isotropic, hyperelastic and incompressible material are summarized and then specialized to a form suitable for the analysis of a spherical shell subject to an internal or an external pressure. A thick-walled spherical shell during inflation is analyzed using four different material models. Specifically, one and two terms in the Ogden energy formulation, the Gent model and an I1 formulation recently proposed by Lopez-Pamies. We investigate the existence of local pressure maxima and minima and the dependence of the corresponding stretches on the material model and on shell thickness. These results are then used to investigate axisymmetric bifurcations of the inflated shell. The analysis is extended to determine the behavior of a thick-walled spherical shell subject to an external pressure. We find that the results of the two terms Ogden formulation, the Gent and the Lopez-Pamies models are very similar, for the one term Ogden material we identify additional critical stretches, which have not been reported in the literature before.© 2012 Published by Elsevier Ltd.

  11. Fault-Tolerant, Radiation-Hard DSP

    Science.gov (United States)

    Czajkowski, David

    2011-01-01

    Commercial digital signal processors (DSPs) for use in high-speed satellite computers are challenged by the damaging effects of space radiation, mainly single event upsets (SEUs) and single event functional interrupts (SEFIs). Innovations have been developed for mitigating the effects of SEUs and SEFIs, enabling the use of very-highspeed commercial DSPs with improved SEU tolerances. Time-triple modular redundancy (TTMR) is a method of applying traditional triple modular redundancy on a single processor, exploiting the VLIW (very long instruction word) class of parallel processors. TTMR improves SEU rates substantially. SEFIs are solved by a SEFI-hardened core circuit, external to the microprocessor. It monitors the health of the processor, and if a SEFI occurs, forces the processor to return to performance through a series of escalating events. TTMR and hardened-core solutions were developed for both DSPs and reconfigurable field-programmable gate arrays (FPGAs). This includes advancement of TTMR algorithms for DSPs and reconfigurable FPGAs, plus a rad-hard, hardened-core integrated circuit that services both the DSP and FPGA. Additionally, a combined DSP and FPGA board architecture was fully developed into a rad-hard engineering product. This technology enables use of commercial off-the-shelf (COTS) DSPs in computers for satellite and other space applications, allowing rapid deployment at a much lower cost. Traditional rad-hard space computers are very expensive and typically have long lead times. These computers are either based on traditional rad-hard processors, which have extremely low computational performance, or triple modular redundant (TMR) FPGA arrays, which suffer from power and complexity issues. Even more frustrating is that the TMR arrays of FPGAs require a fixed, external rad-hard voting element, thereby causing them to lose much of their reconfiguration capability and in some cases significant speed reduction. The benefits of COTS high

  12. Modeling the carbon isotope composition of bivalve shells (Invited)

    Science.gov (United States)

    Romanek, C.

    2010-12-01

    The stable carbon isotope composition of bivalve shells is a valuable archive of paleobiological and paleoenvironmental information. Previous work has shown that the carbon isotope composition of the shell is related to the carbon isotope composition of dissolved inorganic carbon (DIC) in the ambient water in which a bivalve lives, as well as metabolic carbon derived from bivalve respiration. The contribution of metabolic carbon varies among organisms, but it is generally thought to be relatively low (e.g., organism and high (>90%) in the shells from terrestrial organisms. Because metabolic carbon contains significantly more C-12 than DIC, negative excursions from the expected environmental (DIC) signal are interpreted to reflect an increased contribution of metabolic carbon in the shell. This observation contrasts sharply with modeled carbon isotope compositions for shell layers deposited from the inner extrapallial fluid (EPF). Previous studies have shown that growth lines within the inner shell layer of bivalves are produced during periods of anaerobiosis when acidic metabolic byproducts (e.g., succinic acid) are neutralized (or buffered) by shell dissolution. This requires the pH of EPF to decrease below ambient levels (~7.5) until a state of undersaturation is achieved that promotes shell dissolution. This condition may occur when aquatic bivalves are subjected to external stressors originating from ecological (predation) or environmental (exposure to atm; low dissolved oxygen; contaminant release) pressures; normal physiological processes will restore the pH of EPF when the pressure is removed. As a consequence of this process, a temporal window should also exist in EPF at relatively low pH where shell carbonate is deposited at a reduced saturation state and precipitation rate. For example, EPF chemistry should remain slightly supersaturated with respect to aragonite given a drop of one pH unit (6.5), but under closed conditions, equilibrium carbon isotope

  13. Simulation for double shell pinch

    Institute of Scientific and Technical Information of China (English)

    Wang Gang-Hua; Hu Xi-Jing; Sun Cheng-Wei

    2004-01-01

    Basic shock phenomena are presented in a composite pinch, a hybrid of the Z-pinch. The successive transfer of current within the plasma structure is demonstrated by our calculations. Properties of the shock wave are described.The current distribution between the two shells after the outer shell hitting the inner shell is also discussed.

  14. Temporal structures in shell models

    DEFF Research Database (Denmark)

    Okkels, F.

    2001-01-01

    The intermittent dynamics of the turbulent Gledzer, Ohkitani, and Yamada shell-model is completely characterized by a single type of burstlike structure, which moves through the shells like a front. This temporal structure is described by the dynamics of the instantaneous configuration of the shell...

  15. Recent Advances in Shell Evolution with Shell-Model Calculations

    CERN Document Server

    Utsuno, Yutaka; Tsunoda, Yusuke; Shimizu, Noritaka; Honma, Michio; Togashi, Tomoaki; Mizusaki, Takahiro

    2014-01-01

    Shell evolution in exotic nuclei is investigated with large-scale shell-model calculations. After presenting that the central and tensor forces produce distinctive ways of shell evolution, we show several recent results: (i) evolution of single-particle-like levels in antimony and cupper isotopes, (ii) shape coexistence in nickel isotopes understood in terms of configuration-dependent shell structure, and (iii) prediction of the evolution of the recently established $N=34$ magic number towards smaller proton numbers. In any case, large-scale shell-model calculations play indispensable roles in describing the interplay between single-particle character and correlation.

  16. Non-linear Vibrations of Deep Cylindrical Shells by the p-Version Finite Element Method

    Directory of Open Access Journals (Sweden)

    Pedro Ribeiro

    2010-01-01

    Full Text Available A p-version shell finite element based on the so-called shallow shell theory is for the first time employed to study vibrations of deep cylindrical shells. The finite element formulation for deep shells is presented and the linear natural frequencies of different shells, with various boundary conditions, are computed. These linear natural frequencies are compared with published results and with results obtained using a commercial software finite element package; good agreement is found. External forces are applied and the displacements in the geometrically non-linear regime computed with the p-model are found to be close to the ones computed using a commercial FE package. In all numerical tests the p-FE model requires far fewer degrees of freedom than the regular FE models. A numerical study on the dynamic behaviour of deep shells is finally carried out.

  17. Stabilization of the resistive wall mode using a fake rotating shell

    Energy Technology Data Exchange (ETDEWEB)

    Fitzpatrick, R. [Texas Univ., Austin, TX (United States). Inst. for Fusion Studies; Jensen, T.H. [General Atomics, La Jolla, CA (United States)

    1995-11-01

    Tokamak plasma performance can, in theory, be greatly improved if the so called resistive wall mode is stabilized. This can be achieved by spinning the plasma rapidly, but such a scheme is not reactor relevant. A more promising approach is to apply external feedback in order to make a resistive shell placed around the plasma act like a perfect conductor. A scheme is outlined by which a network of feedback controlled conductors surrounding the plasma can be made to act like a rotating shell. This fake rotating shell combined with a stationary conventional shell (e.g. the vacuum vessel) can completely stabilize the resistive wall mode. The gain, bandwidth, current, and power requirements of the feedback amplifiers are extremely modest. A previously proposed stabilization scheme (the intelligent shell) is also investigated, and is compared with the fake rotating shell concept. The main disadvantage of the former scheme is that it requires a high gain.

  18. Kondo effect in organometallic complexes with vibrating ligand shells

    Energy Technology Data Exchange (ETDEWEB)

    Kiselev, M.N. [Institut fuer Theoretische Physik und Astrophysik, Universitaet Wuerzburg, 97074 (Germany)]. E-mail: kiselev@physik.uni-wuerzburg.de; Kikoin, K. [Physics Department, Ben-Gurion University, Beer-Sheva 84105 (Israel); Wegewijs, M.R. [Institut fuer Theoretische Physik-Lehrstuhl A, RWTH Aachen, 52056 Aachen (Germany)

    2007-03-15

    We investigate transport through a mononuclear rare-earth metal-organic shell complex with strong tunnel coupling between the shell and two electrodes. The ground state of this molecule is a singlet while the first excited state is a triplet. We show that modulation of the tunnel barrier due to a molecular distortion which couples to the tunneling induces the Kondo effect, provided the discrete vibrational energy compensates the singlet/triplet gap. We discuss also the possibility of tuning the phonon-induced Kondo tunneling by external magnetic field and the finite bias Kondo anomaly.

  19. 7 CFR 51.2002 - Split shell.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Split shell. 51.2002 Section 51.2002 Agriculture... Standards for Grades of Filberts in the Shell 1 Definitions § 51.2002 Split shell. Split shell means a shell... of the shell, measured in the direction of the crack....

  20. First Images from HERO: A Hard-X-Ray Focusing Telescope

    Science.gov (United States)

    Ramsey, Brian D.; Alexander, Cheryl D.; Apple, Jeff A.; Benson, Carl M.; Dietz, Kurtis L.; Elsner, Ronald F.; Engelhaupt, Darell E.; Ghosh, Kajal K.; Kolodziejczak, Jeffery J.; ODell, Stephen L.; Whitaker, Ann F. (Technical Monitor)

    2001-01-01

    We are developing a balloon-borne hard-x-ray telescope that utilizes grazing incidence optics. Termed HERO, for High-Energy Replicated Optics, the instrument will provide unprecented sensitivity in the hard-x-ray region and will achieve milliCrab-level sensitivity in a typical 3-hour balloon-flight observation and 50 microCrab sensitivity on ultra-long-duration flights. A recent proof-of-concept flight, featuring a small number of mirror shells captured the first focused hard-x-ray images of galactic x-ray sources. Full details of the payload, its expected future performance and its recent measurements are provided.

  1. Hard and Soft Governance

    DEFF Research Database (Denmark)

    Moos, Lejf

    2009-01-01

    and discusses governance forms at several levels. The first layer is the global: the methods of 'soft governance' that are being utilised by transnational agencies. The second layer is the national and local: the shift in national and local governance seen in many countries, but here demonstrated in the case......The governance and leadership at transnational, national and school level seem to be converging into a number of isomorphic forms as we see a tendency towards substituting 'hard' forms of governance, that are legally binding, with 'soft' forms based on persuasion and advice. This article analyses...... of Denmark, and finally the third layer: the leadership used in Danish schools. The use of 'soft governance' is shifting the focus of governance and leadership from decisions towards influence and power and thus shifting the focus of the processes from the decision-making itself towards more focus...

  2. Hard photoproduction at HERA

    Energy Technology Data Exchange (ETDEWEB)

    Klasen, M. [Laboratoire de Physique Subatomique et de Cosmologie, Universite Joseph Fourier / CNRS-IN2P3, 53 Avenue des Martyrs, F-38026 Grenoble (France)

    2007-07-01

    In view of possible photoproduction studies in ultra-peripheral heavy-ion collisions at the LHC, we briefly review the present theoretical understanding of photons and hard photoproduction processes at HERA, discussing the production of jets, light and heavy hadrons, quarkonia, and prompt photons. We address in particular the extraction of the strong coupling constant from photon structure function and inclusive jet measurements, the infrared safety and computing time of jet definitions, the sensitivity of di-jet cross sections on the parton densities in the photon, factorization breaking in diffractive di-jet production, the treatment of the heavy-quark mass in charm production, the relevance of the color-octet mechanism for quarkonium production, and isolation criteria for prompt photons. (author)

  3. Continual Measuring of Local Stress Values on Shell of the Blast Furnace Hearth and of Total Shell Expansion

    Directory of Open Access Journals (Sweden)

    P. Bigoš

    2012-01-01

    Full Text Available This paper deals with installation of strain gauges on the external surface of the blast furnace shell in two rows, whereas there will be defi ned 8 measuring points in every row. The fi nal result is evaluation of data obtained during up to 45 days of the operation. In this papers are commentary and discussions to measured time behaviours. The main purpose of this measuring was investigation of impact of salamander on blast furnace shell expansion after its lay off , cooling and next starting of operation.

  4. Ultrastructural immunolocalization of alpha-keratins and associated beta-proteins (beta-keratins) suggests a new interpretation on the process of hard and soft cornification in turtle epidermis.

    Science.gov (United States)

    Alibardi, L

    2013-01-01

    The epidermis of soft-shelled and hard-shelled turtles has been compared to determine the origin of the different cornification. Immunolocalization of acidic alpha-keratin (AK2) of 45-50 kDa in tonofilaments of the epidermis in Apalone spinifera and absence in the corneous layer where desquamating corneocytes are present supports the biochemical data. Corneocytes shows a weak to absent immunolabeling for beta-proteins (formerly beta-keratins) of 14-16 kDa while sparse immunolabeled corneous granules are seen in the pre-corneous layer. In the hard-shelled turtle Pseudemys nelsonii differentiating corneocytes contain small level of acidic alpha-keratin while beta-proteins of 10-17 kDa form dense aggregates of corneous material among tonofilaments. Corneocytes do not desquamate but remain tightly connected determining an increase in thickness of the corneous layer that becomes mechanically stiff and resistant. Since both species possess beta-proteins in shelled and non-shelled areas of the epidermis the difference in hardness of the corneous layer is not due to the alternation between beta-keratin versus alpha-keratin. Mechanical resilience of the corneous layer derives from the accumulation of alpha-keratins, beta- and likely of other proteins in corneocytes of the shell in hard-shelled turtles. In the softer epidermis of hard-shelled turtles and in the soft-shelled turtle a more rapid and continuous turnover of corneocytes is present and no accumulation of beta-proteins and corneocytes takes place. It is hypothesized that the dermis derived from the carapacial ridge during development remains localized underneath the shell epidermis in hard-shelled turtles and influences the formation of the hard corneous epidermis.

  5. Fabrication of polyacrylate core-shell nanoparticles via spray drying method

    Science.gov (United States)

    Chen, Pengpeng; Cheng, Zenghui; Chu, Fuxiang; Xu, Yuzhi; Wang, Chunpeng

    2016-05-01

    Fine polyacrylate particles are thought to be environmental plastisols for car industry. However, these particles are mainly dried through demulsification of the latexes, which is not reproducible and hard to be scaled up. In this work, a spray drying method had been applied to the plastisols-used acrylate latex. By adjusting the core/shell ratio, spray drying process of the latex was fully studied. Scanning electronic microscopy observation of the nanoparticles before and after spray drying indicated that the core-shell structures could be well preserved and particles were well separated by spray drying if the shell was thick enough. Otherwise, the particles fused into each other and core-shell structures were destroyed. Polyacrylate plastisols were developed using diisononylphthalate as a plasticizer, and plastigels were obtained after heat treatment of the sols. Results showed that the shell thickness also had a great influence on the storage stability of the plastisols and mechanical properties of the plastigels.

  6. Effect of Magnetic Field and Shell Thickness on Binding Energies of a ZnSe/ZnS Core Shell Quantum Dot

    Science.gov (United States)

    Bhat, Bashir Mohi ud din; Parvaiz, Muhammad Shunaid; Sen, Pratima

    2017-02-01

    We investigated the effect of external magnetic field and shell thickness on the binding energies of a ZnSe/ZnS core shell quantum dot. The binding energies were calculated using the variational method within the effective mass approximation and confinement potential. The binding energy of the 2 s and 2 p + states was found to increase with magnetic field. However, the 2 p 0 state was found to be independent of the magnetic field at a shell thickness of 0.5 nm. Degeneracy of the lifted 2 p states was found to occur. The results also showed that the electron binding energy increases at the outset with the increasing shell thickness, and at larger shell thicknesses, the binding energy saturates. The binding energy was found to be decreasing with increasing core diameter and becomes appreciably smaller at core radius of 0.42 nm. The observed results were compared with the previously reported results.

  7. Externally Verifiable Oblivious RAM

    Directory of Open Access Journals (Sweden)

    Gancher Joshua

    2017-04-01

    Full Text Available We present the idea of externally verifiable oblivious RAM (ORAM. Our goal is to allow a client and server carrying out an ORAM protocol to have disputes adjudicated by a third party, allowing for the enforcement of penalties against an unreliable or malicious server. We give a security definition that guarantees protection not only against a malicious server but also against a client making false accusations. We then give modifications of the Path ORAM [15] and Ring ORAM [9] protocols that meet this security definition. These protocols both have the same asymptotic runtimes as the semi-honest original versions and require the external verifier to be involved only when the client or server deviates from the protocol. Finally, we implement externally verified ORAM, along with an automated cryptocurrency contract to use as the external verifier.

  8. External Beam Therapy (EBT)

    Science.gov (United States)

    ... Esophageal Cancer Treatment Head and Neck Cancer Treatment Lung Cancer Treatment Prostate Cancer Treatment Brain Tumor Treatment Why is ... Radiation Oncology) Breast Cancer Treatment Esophageal Cancer Treatment Lung Cancer Treatment Images related to External Beam Therapy (EBT) Sponsored ...

  9. MALIGNANT EXTERNAL OTITIS

    OpenAIRE

    Massoud Moghaddam

    1993-01-01

    Two case reports of malignant external otitis in the elderly diabetics and their complications and management with regard to our experience at Amir Alam Hospital, Department of ENT will be discussed here.

  10. Checklists for external validity

    DEFF Research Database (Denmark)

    Dyrvig, Anne-Kirstine; Kidholm, Kristian; Gerke, Oke;

    2014-01-01

    RATIONALE, AIMS AND OBJECTIVES: The quality of the current literature on external validity varies considerably. An improved checklist with validated items on external validity would aid decision-makers in judging similarities among circumstances when transferring evidence from a study setting...... to an implementation setting. In this paper, currently available checklists on external validity are identified, assessed and used as a basis for proposing a new improved instrument. METHOD: A systematic literature review was carried out in Pubmed, Embase and Cinahl on English-language papers without time restrictions....... The retrieved checklist items were assessed for (i) the methodology used in primary literature, justifying inclusion of each item; and (ii) the number of times each item appeared in checklists. RESULTS: Fifteen papers were identified, presenting a total of 21 checklists for external validity, yielding a total...

  11. Blended Isogeometric Shells

    Science.gov (United States)

    2012-08-01

    possibilities that heretofore have not been investigated, namely, “rigid bodies” [7]. Another need for the use of these techniques is in multi-patch NURBS meshes... techniques is completely satisfactory in all cases. Even if they can be used successfully in certain situations they can give rise to reduced critical...condition which is violated at the patch boundaries. The C0 boundaries between patches behave like piano hinges for thin shell formulations, and

  12. Off-Shell Supersymmetry

    OpenAIRE

    Ho, Chiu Man; Okada, Nobuchika

    2014-01-01

    Supersymmetry does not dictate the way we should quantize the fields in the supermultiplets, and so we have the freedom to quantize the Standard Model (SM) particles and their superpartners differently. We propose a generalized quantization scheme under which a particle can only appear off-shell, while its contributions to quantum corrections are exactly the same as those in the usual quantum field theory. We apply this quantization scheme solely to the sparticles in the $R$-parity preserving...

  13. Tuning the bridging attraction between large hard particles by the softness of small microgels.

    Science.gov (United States)

    Luo, Junhua; Yuan, Guangcui; Han, Charles C

    2016-09-20

    In this study, the attraction between large hard polystyrene (PS) spheres is studied by using three types of small microgels as bridging agents. One is a purely soft poly(N-isopropylacrylamide) (PNIPAM) microgel, the other two have a non-deformable PS hard core surrounded by a soft PNIPAM shell but are different in the core-shell ratio. The affinity for bridging the large PS spheres is provided and thus affected by the PNIPAM constituent in the microgels. The bridging effects caused by the microgels can be indirectly incorporated into their influence on the effective attraction interaction between the large hard spheres, since the size of the microgels is very small in comparison to the size of the PS hard spheres. At a given volume fraction of large PS spheres, they behave essentially as hard spheres in the absence of small microgels. By gradually adding the microgels, the large spheres are connected to each other through the bridging of small particles until the attraction strength reaches a maximum value, after which adding more small particles slowly decreases the effective attraction strength and eventually the large particles disperse individually when saturated adsorption is achieved. The aggregation and gelation behaviors triggered by these three types of small microgels are compared and discussed. A way to tune the strength and range of the short-range attractive potential via changing the softness of bridging microgels (which can be achieved either by using core-shell microgels or by changing the temperature) is proposed.

  14. Migration with fiscal externalities.

    Science.gov (United States)

    Hercowitz, Z; Pines, D

    1991-11-01

    "This paper analyses the distribution of a country's population among regions when migration involves fiscal externalities. The main question addressed is whether a decentralized decision making [by] regional governments can produce an optimal population distribution...or a centralized intervention is indispensable, as argued before in the literature.... It turns out that, while with costless mobility the fiscal externality is fully internalized by voluntary interregional transfers, with costly mobility, centrally coordinated transfers still remain indispensable for achieving the socially optimal allocation."

  15. Sen cycles and externalities

    OpenAIRE

    Piggins, Ashley; Salerno, Gillian

    2016-01-01

    It has long been understood that externalities of some kind are responsible for Sen’s (1970) theorem on the impossibility of a Paretian liberal. However, Saari and Petron (2006) show that for any social preference cycle generated by combining the weak Pareto principle and individual decisiveness, every decisive individual must suffer at least one strong negative externality. We show that this fundamental result only holds when individual preferences are strict. Building on their contribution,...

  16. Bioerosion of gastropod shells: with emphasis on effects of coralline algal cover and shell microstructure

    Science.gov (United States)

    Smyth, Miriam J.

    1989-12-01

    Organisms boring into fifty nine species of gastropod shells on reefs around Guam were the bryozoan Penetrantia clionoides; the acrothoracian barnacles Cryptophialus coronorphorus, Cryptophialus zulloi and Lithoglyptis mitis; the foraminifer Cymbaloporella tabellaeformis, the polydorid Polydora sp. and seven species of clionid sponge. Evidence that crustose coralline algae interfere with settlement of larvae of acrothoracian barnacles, clionid sponges, and boring polychaetes came from two sources: (1) low intensity of boring in limpet shells, a potentially penetrable substrate that remains largely free of borings by virtue of becoming fully covered with coralline algae at a young age and (2) the extremely low levels of boring in the algal ridge, a massive area of carbonate almost entirely covered by a layer of living crustose corallines. There was a strong negative correlation between microstructural hardness and infestation by acrothoracian barnacles and no correlation in the case of the other borers. It is suggested that this points to a mechanical rather than a chemical method of boring by the barnacles. The periostracum, a layer of organic material reputedly a natural inhibitor of boring organisms, was bored by acrothoracican barnacles and by the bryozoan. The intensity of acrothoracican borings is shown to have no correlation with the length of the gastropod shell.

  17. Hard coal; Steinkohle

    Energy Technology Data Exchange (ETDEWEB)

    Loo, Kai van de; Sitte, Andreas-Peter [Gesamtverband Steinkohle e.V. (GVSt), Herne (Germany)

    2015-07-01

    International the coal market in 2014 was the first time in a long time in a period of stagnation. In Germany, the coal consumption decreased even significantly, mainly due to the decrease in power generation. Here the national energy transition has now been noticable affected negative for coal use. The political guidances can expect a further significant downward movement for the future. In the present phase-out process of the German hard coal industry with still three active mines there was in 2014 no decommissioning. But the next is at the end of 2015, and the plans for the time after mining have been continued. [German] International war der Markt fuer Steinkohle 2014 erstmals seit langem wieder von einer Stagnation gekennzeichnet. In Deutschland ging der Steinkohlenverbrauch sogar deutlich zurueck, vor allem wegen des Rueckgangs in der Stromerzeugung. Hier hat sich die nationale Energiewende nun spuerbar und fuer die Steinkohlennutzung negativ ausgewirkt. Die politischen Weichenstellungen lassen fuer die Zukunft eine weitere erhebliche Abwaertsbewegung erwarten. Bei dem im Auslaufprozess befindlichen deutschen Steinkohlenbergbau mit noch drei aktiven Bergwerken gab es 2014 keine Stilllegung. Doch die naechste steht zum Jahresende 2015 an, und die Planungen fuer die Zeit nach dem Bergbau sind fortgefuehrt worden.

  18. Optimization of a Shell and Tube Condenser using Numerical Method

    Directory of Open Access Journals (Sweden)

    Pradeep Wagh

    2015-07-01

    Full Text Available The purpose of this study was to investigate the effect of installation of the tube external surfaces, their parameter and variable in a shell-and-tube condenser. Variation of heat transfer coefficient with each variable of shell and tube condenser was measured each test. The optimization tube outside diameter size was analyzed and use extended surface area attached tube with tube material and tube layout and arrangement (Number of tube a triangular or hexagonal arrangement on shell-and tube condenser. The computer programming was used to get faster output in less time. Results suggest that mean heat transfer coefficient in variable condition were mainly at velocity is fixed. And also average additional surfaces and tube layout and the arrangement comparison with the quantity of the heat transfer.

  19. Biocompatible magnetic core-shell nanocomposites for engineered magnetic tissues

    Science.gov (United States)

    Rodriguez-Arco, Laura; Rodriguez, Ismael A.; Carriel, Victor; Bonhome-Espinosa, Ana B.; Campos, Fernando; Kuzhir, Pavel; Duran, Juan D. G.; Lopez-Lopez, Modesto T.

    2016-04-01

    The inclusion of magnetic nanoparticles into biopolymer matrixes enables the preparation of magnetic field-responsive engineered tissues. Here we describe a synthetic route to prepare biocompatible core-shell nanostructures consisting of a polymeric core and a magnetic shell, which are used for this purpose. We show that using a core-shell architecture is doubly advantageous. First, gravitational settling for core-shell nanocomposites is slower because of the reduction of the composite average density connected to the light polymer core. Second, the magnetic response of core-shell nanocomposites can be tuned by changing the thickness of the magnetic layer. The incorporation of the composites into biopolymer hydrogels containing cells results in magnetic field-responsive engineered tissues whose mechanical properties can be controlled by external magnetic forces. Indeed, we obtain a significant increase of the viscoelastic moduli of the engineered tissues when exposed to an external magnetic field. Because the composites are functionalized with polyethylene glycol, the prepared bio-artificial tissue-like constructs also display excellent ex vivo cell viability and proliferation. When implanted in vivo, the engineered tissues show good biocompatibility and outstanding interaction with the host tissue. Actually, they only cause a localized transitory inflammatory reaction at the implantation site, without any effect on other organs. Altogether, our results suggest that the inclusion of magnetic core-shell nanocomposites into biomaterials would enable tissue engineering of artificial substitutes whose mechanical properties could be tuned to match those of the potential target tissue. In a wider perspective, the good biocompatibility and magnetic behavior of the composites could be beneficial for many other applications.The inclusion of magnetic nanoparticles into biopolymer matrixes enables the preparation of magnetic field-responsive engineered tissues. Here we

  20. Shell model calculations of 109Sb in the sdgh shell

    Science.gov (United States)

    Dikmen, E.; Novoselsky, A.; Vallieres, M.

    2001-12-01

    The energy spectra of the antimony isotope 109Sb in the sdgh shell are calculated in the nuclear shell model approach by using the CD-Bonn nucleon-nucleon interaction. The modified Drexel University parallel shell model code (DUPSM) was used for the calculations with maximum Hamiltonian dimension of 762 253 of 5.14% sparsity. The energy levels are compared to the recent experimental results. The calculations were done on the Cyborg Parallel Cluster System at Drexel University.

  1. Measuring the Hardness of Minerals

    Science.gov (United States)

    Bushby, Jessica

    2005-01-01

    The author discusses Moh's hardness scale, a comparative scale for minerals, whereby the softest mineral (talc) is placed at 1 and the hardest mineral (diamond) is placed at 10, with all other minerals ordered in between, according to their hardness. Development history of the scale is outlined, as well as a description of how the scale is used…

  2. Why All the Hard Work?

    Institute of Scientific and Technical Information of China (English)

    VALERIE; SARTOR

    2011-01-01

    The stereotype of the hard working Chinese has been around for a long time in the West. As early a 1894, Arthur Smith, a missionary who spent 54 years in China, wrote book introducing the hard-working Chinese people to Americans. In his book Chinese Characteristics, Smith wrote about the dili

  3. Phase behavior of hard particles

    NARCIS (Netherlands)

    Duijneveldt, J.S. van; Lekkerkerker, H.N.W.

    1995-01-01

    The phase behavior of hard particles and mixtures thereof is reviewed. Special attention is given to a lattice model consisting of hard hexagons and points on a triangular lattice. This model appears to have two disordered phases and an ordered phase.

  4. Melting of polydisperse hard disks

    NARCIS (Netherlands)

    Pronk, S.; Frenkel, D.

    2004-01-01

    The melting of a polydisperse hard-disk system is investigated by Monte Carlo simulations in the semigrand canonical ensemble. This is done in the context of possible continuous melting by a dislocation-unbinding mechanism, as an extension of the two-dimensional hard-disk melting problem. We find

  5. Melting of polydisperse hard disks

    NARCIS (Netherlands)

    Pronk, S.; Frenkel, D.

    2004-01-01

    The melting of a polydisperse hard-disk system is investigated by Monte Carlo simulations in the semigrand canonical ensemble. This is done in the context of possible continuous melting by a dislocation-unbinding mechanism, as an extension of the two-dimensional hard-disk melting problem. We find th

  6. Mussel shell evaluation as bioindicator for heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Andrello, Avacir Casanova; Lopes, Fabio; Galvao, Tiago D. [Universidade Estadual de Londrina (UEL), PR (Brazil). Dept. de Fisica. Lab. de Fisica Nuclear Aplicada

    2009-07-01

    Full text: Recently, in Brazil, it has been appearing a new and unusual 'plague' in leisure and commercial fishing, caused by the parasitic larval phase of certain native bivalve mollusks of fresh water known as 'Naiades'. Such situation involves the presence of big bivalve of fresh water, mainly Anodontites trapesialis, in the tanks and dams of the fish creation, such bivalve mollusks belonging to the Ordem Unionoida and the Familia Mycetopodidae. The present work objectified to analyze the shells of such mollusks to verify the possibility of such mollusks as bioindicators of heavy metals in fresh water. The mollusks shells were collected in a commercial fishing at Londrina-PR, and analyzed qualitatively to determine the chemical composition and possible correlation with existent heavy metals in the aquatic environment. Studies of the literature have been showing that those mollusks are susceptible the existent chemical alterations in the aquatic environment due to anthropogenic action. Three different shells were analyzed, with the measures done on the external and internal side, using a portable Energy Dispersive X-Ray Fluorescence system (PXRF-LFNA-02). The measures were realized in the applied nuclear physics laboratory of State University of Londrina, and the PXRF-LFNA-02 is composed by a X-Ray tube (with Ag target and filter) with potency of 4W, and a detector Si-PIN model XR-100CR of Ampetc Inc. with resolution of 221eV for the line of 5.9 keV of the {sup 55}Fe (with a 25{mu}m Be window thickness and Ag collimator), Current 10 mA and High Voltage 28 kV. In the internal part of shells were identified the elements Ca, P, Fe, Mn and Sr and in the external part were identified Ca, P, Fe, Mn, Sr and Cu. The Ca ratio among the external and internal sides of the analyzed shells is around of 1, and it was expected because Ca is the main composed of mollusks shells. The ratio of P, Fe, Mn, and Sr for Ca stayed constant in all analyzed shells

  7. Density functional approximation for van der Waals fluids: based on hard sphere density functional approximation

    Institute of Scientific and Technical Information of China (English)

    Zhou Shi-Qi

    2007-01-01

    A universal theoretical approach is proposed which enables all hard sphere density functional approximations(DFAs) applicable to van der Waals fluids. The resultant DFA obtained by combining the universal theoretical approach with any hard sphere DFAs only needs as input a second-order direct correlation function (DCF) of a coexistence bulk fluid, and is applicable in both supercritical and subcritical temperature regions. The associated effective hard sphere density can be specified by a hard wall sum rule. It is indicated that the value of the effective hard sphere density so determined can be universal, i.e. can be applied to any external potentials different from the single hard wall. As an illustrating example, the universal theoretical approach is combined with a hard sphere bridge DFA to predict the density profile of a hard core attractive Yukawa model fluid influenced by diverse external fields; agreement between the present formalism's predictions and the corresponding simulation data is good or at least comparable to several previous DFT approaches. The primary advantage of the present theoretical approach combined with other hard sphere DFAs is discussed.

  8. Multi-Shell Shell Model for Heavy Nuclei

    OpenAIRE

    Sun, Yang; Wu, Cheng-Li

    2003-01-01

    Performing a shell model calculation for heavy nuclei has been a long-standing problem in nuclear physics. Here we propose one possible solution. The central idea of this proposal is to take the advantages of two existing models, the Projected Shell Model (PSM) and the Fermion Dynamical Symmetry Model (FDSM), to construct a multi-shell shell model. The PSM is an efficient method of coupling quasi-particle excitations to the high-spin rotational motion, whereas the FDSM contains a successful t...

  9. Hard-X-Ray-Induced Multistep Ultrafast Dissociation

    Science.gov (United States)

    Travnikova, Oksana; Marchenko, Tatiana; Goldsztejn, Gildas; Jänkälä, Kari; Sisourat, Nicolas; Carniato, Stéphane; Guillemin, Renaud; Journel, Loïc; Céolin, Denis; Püttner, Ralph; Iwayama, Hiroshi; Shigemasa, Eiji; Piancastelli, Maria Novella; Simon, Marc

    2016-05-01

    Creation of deep core holes with very short (τ ≤1 fs ) lifetimes triggers a chain of relaxation events leading to extensive nuclear dynamics on a few-femtosecond time scale. Here we demonstrate a general multistep ultrafast dissociation on an example of HCl following Cl 1 s →σ* excitation. Intermediate states with one or multiple holes in the shallower core electron shells are generated in the course of the decay cascades. The repulsive character and large gradients of the potential energy surfaces of these intermediates enable ultrafast fragmentation after the absorption of a hard x-ray photon.

  10. Environmental external effects from wind power based on the EU ExternE methodology

    DEFF Research Database (Denmark)

    Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

    1998-01-01

    The European Commission has launched a major study project, ExternE, to develop a methodology to quantify externalities. A “National Implementation Phase”, was started under the Joule II programme with the purpose of implementing the ExternE methodology in all member states. The main objective...

  11. Multi-shell effective interactions

    CERN Document Server

    Tsunoda, Naofumi; Hjorth-Jensen, Morten; Otsuka, Takaharu

    2013-01-01

    Background: Effective interactions, either derived from microscopic theories or based on fitting selected properties of nuclei in specific mass regions, are widely used inputs to shell-model studies of nuclei. Until recently, most shell-model calculations have been confined to a single oscillator shell. Recent interest in nuclei away from the stability line, requires however larger shell-model spaces. Since the derivation of microscopic effective interactions has been limited to degenerate model spaces, there are both conceptual and practical limits to present shell-model calculations that utilize such interactions. Purpose: The aim of this work is to present a novel microscopic method to calculate effective interactions for the nuclear shell model. Its main difference from existing theories is that it can be applied not only to degenerate model spaces but also to non-degenerate model spaces. Methods: The formalism is presented in the form of many-body perturbation theory based on the recently developed Exten...

  12. Shell Biorefinery: Dream or Reality?

    Science.gov (United States)

    Chen, Xi; Yang, Huiying; Yan, Ning

    2016-09-12

    Shell biorefinery, referring to the fractionation of crustacean shells into their major components and the transformation of each component into value-added chemicals and materials, has attracted growing attention in recent years. Since the large quantities of waste shells remain underexploited, their valorization can potentially bring both ecological and economic benefits. This Review provides an overview of the current status of shell biorefinery. It first describes the structural features of crustacean shells, including their composition and their interactions. Then, various fractionation methods for the shells are introduced. The last section is dedicated to the valorization of chitin and its derivatives for chemicals, porous carbon materials and functional polymers. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Wrinkling of Pressurized Elastic Shells

    KAUST Repository

    Vella, Dominic

    2011-10-01

    We study the formation of localized structures formed by the point loading of an internally pressurized elastic shell. While unpressurized shells (such as a ping-pong ball) buckle into polygonal structures, we show that pressurized shells are subject to a wrinkling instability. We study wrinkling in depth, presenting scaling laws for the critical indentation at which wrinkling occurs and the number of wrinkles formed in terms of the internal pressurization and material properties of the shell. These results are validated by numerical simulations. We show that the evolution of the wrinkle length with increasing indentation can be understood for highly pressurized shells from membrane theory. These results suggest that the position and number of wrinkles may be used in combination to give simple methods for the estimation of the mechanical properties of highly pressurized shells. © 2011 American Physical Society.

  14. Processes in suspensions of nanocomposite microcapsules exposed to external electric fields

    Science.gov (United States)

    Ermakov, A. V.; Lomova, M. V.; Kim, V. P.; Chumakov, A. S.; Gorbachev, I. A.; Gorin, D. A.; Glukhovskoy, E. G.

    2016-04-01

    Microcapsules with and without magnetite nanoparticles incorporated in the polyelectrolyte shell were prepared. The effect of external electric field on the nanocomposite polyelectrolyte microcapsules containing magnetite nanoparticles in the shell was studied in this work as a function of the electric field strength. Effect of electric fields on polyelectrolyte microcapsules and the control over integrity of polyelectrolyte microcapsules with and without inorganic nanoparticles by constant electric field has been investigated. Beads effect, aggregation and deformations of nanocomposite microcapsule shell in response to electric field were observed by confocal laser scanning microscopy (CLSM). Thus, a new approach for effect on the nanocomposite microcapsule, including opening microcapsule shell by an electric field, was demonstrated. These results can be used for creation of new systems for drug delivery systems with controllable release by external electric field.

  15. Influences of organic matter and calcification rate on trace elements in aragonitic estuarine bivalve shells

    Science.gov (United States)

    Takesue, R.K.; Bacon, C.R.; Thompson, J.K.

    2008-01-01

    A suite of elements (B, Na, Mg, S, K, Ca, V, Mn, Cr, Sr, and Ba) was measured in aragonitic shells of the estuarine bivalve Corbula amurensis, the Asian clam, using the Sensitive High-Resolution Ion MicroProbe with Reverse Geometry (SHRIMP RG). Our initial intent was to explore potential geochemical proxy relationships between shell chemistry and salinity (freshwater inflow) in northern San Francisco Bay (SFB). In the course of this study we observed variations in shell trace element to calcium ([M]/Ca) ratios that could only be attributed to internal biological processes. This paper discusses the nature and sources of internal trace element variability in C. amurensis shells related to the shell organic fraction and shell calcification rates. The average organic content of whole C. amurensis shells is 19%. After treating whole powdered shells with an oxidative cleaning procedure to remove organic matter, shells contained on average 33% less total Mg and 78% less total Mn. Within our analytical uncertainty, Sr and Ba contents were unchanged by the removal of organic matter. These results show that aragonitic C. amurensis shells have a large component of non-lattice-bound Mg and Mn that probably contribute to the dissimilarity of [M]/Ca profiles among five same-sized shells. Non-lattice-bound trace elements could complicate the development and application of geochemical proxy relationships in bivalve shells. Because B, Ba and Sr occur exclusively in shell aragonite, they are good candidates for external proxy relationships. [M]/Ca ratios were significantly different in prismatic and nacreous aragonite and in two valves of the same shell that had different crystal growth rates. Some part of these differences can be attributed to non-lattice-bound trace elements associated with the organic fraction. The differences in [M]/Ca ratios were also consistent with the calcification rate-dependent ion transport model developed by Carr?? et al. [Carr?? M., Bentaleb I

  16. Surface Hardness of Friction Stir Welded AA6063 Pipe

    OpenAIRE

    Ismail Azman; Awang Mokhtar

    2014-01-01

    The external surface hardness of friction stir welded aluminum alloy 6063 pipe joint was investigated in this paper. The 89mm of outside diameter pipe with 5mm of wall thickness was used as test pipe piece for this experiment on closed butt joint configuration by utilising Bridgeport 2216 CNC milling machine and orbital clamping unit specially designed to cater for this task and function. Several welded samples were produced on varying process parameters which were successfully joined by usin...

  17. The notes on thin shells

    CERN Document Server

    Iofa, Mikhail Z

    2016-01-01

    Geometry of the spacetime with a spherical shell embedded in it is studied in two coordinate systems - in Kodama-Schwarzschild coordinates and in Gaussian normal coordinates. We consider transformations between the coordinate systems as in the 4D spacetime so as at the surface $\\S$ swept in the spacetime by the spherical shell. Extrinsic curvatures of the surface swept by the shell are calculated in both coordinate systems. Applications to the Israel junction conditions are discussed.

  18. Shell effects in nuclear magnetization

    Energy Technology Data Exchange (ETDEWEB)

    Kondratyev, V.N.; Maruyama, Toshiki; Chiba, Satoshi [Advanced Science Research Center, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan)

    2000-08-01

    The magnetization of nuclei in strong magnetic fields associated with magnetars' is considered within the shell model. It is demonstrated that the magnetic field gives rise to a phase-shift of the shell-oscillations in nuclear masses shifting significantly the nuclear magic numbers of the iron region towards smaller mass numbers. Shell-effects are found to result in anomalies of the nuclear magnetization. Such anomalies resemble the behavior associated with a phase transition. (author)

  19. Externality or sustainability economics?

    Energy Technology Data Exchange (ETDEWEB)

    Bergh, Jeroen C.J.M. van den [ICREA, Barcelona (Spain); Department of Economics and Economic History and Institute for Environmental Science and Technology, Universitat Autonoma de Barcelona (Spain)

    2010-09-15

    In an effort to develop 'sustainability economics' Baumgaertner and Quaas (2010) neglect the central concept of environmental economics-'environmental externality'. This note proposes a possible connection between the concepts of environmental externality and sustainability. In addition, attention is asked for other aspects of 'sustainability economics', namely the distinction weak/strong sustainability, spatial sustainability and sustainable trade, distinctive sustainability policy, and the ideas of early 'sustainability economists'. I argue that both sustainability and externalities reflect a systems perspective and propose that effective sustainability solutions require that more attention is given to system feedbacks, notably other-regarding preferences and social interactions, and energy and environmental rebound. The case of climate change and policy is used to illustrate particular statements. As a conclusion, a list of 20 insights and suggestions for research is offered. (author)

  20. Metasurface external cavity laser

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Luyao, E-mail: luyaoxu.ee@ucla.edu; Curwen, Christopher A.; Williams, Benjamin S. [Department of Electrical Engineering, University of California, Los Angeles, California 90095 (United States); California NanoSystems Institute, University of California, Los Angeles, California 90095 (United States); Hon, Philip W. C.; Itoh, Tatsuo [Department of Electrical Engineering, University of California, Los Angeles, California 90095 (United States); Chen, Qi-Sheng [Northrop Grumman Aerospace Systems, Redondo Beach, California 90278 (United States)

    2015-11-30

    A vertical-external-cavity surface-emitting-laser is demonstrated in the terahertz range, which is based upon an amplifying metasurface reflector composed of a sub-wavelength array of antenna-coupled quantum-cascade sub-cavities. Lasing is possible when the metasurface reflector is placed into a low-loss external cavity such that the external cavity—not the sub-cavities—determines the beam properties. A near-Gaussian beam of 4.3° × 5.1° divergence is observed and an output power level >5 mW is achieved. The polarized response of the metasurface allows the use of a wire-grid polarizer as an output coupler that is continuously tunable.

  1. Plate shell structures of glass

    DEFF Research Database (Denmark)

    Bagger, Anne

    to their curved shape. A plate shell structure maintains a high stiffness-to-weight ratio, while facilitating the use of plane structural elements. The study focuses on using laminated glass panes for the load bearing facets. Various methods of generating a plate shell geometry are suggested. Together with Ghent......, such as facet size, imperfections, and connection characteristics. The critical load is compared to that of a similar, but smoothly curved, shell structure. Based on the investigations throughout the study, a set of guidelines for the structural design of plate shells of glass is proposed....

  2. 7 CFR 51.2289 - Shell.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Shell. 51.2289 Section 51.2289 Agriculture Regulations... Standards for Shelled English Walnuts (Juglans Regia) Definitions § 51.2289 Shell. Shell means the outer shell and/or the woody partition from between the halves of the kernel, and any fragments of either....

  3. Impact of high pCO2 on shell structure of the bivalve Cerastoderma edule.

    Science.gov (United States)

    Milano, Stefania; Schöne, Bernd R; Wang, Schunfeng; Müller, Werner E

    2016-08-01

    Raised atmospheric emissions of carbon dioxide (CO2) result in an increased ocean pCO2 level and decreased carbonate saturation state. Ocean acidification potentially represents a major threat to calcifying organisms, specifically mollusks. The present study focuses on the impact of elevated pCO2 on shell microstructural and mechanical properties of the bivalve Cerastoderma edule. The mollusks were collected from the Baltic Sea and kept in flow-through systems at six different pCO2 levels from 900 μatm (control) to 24,400 μatm. Extreme pCO2 levels were used to determine the effects of potential leaks from the carbon capture and sequestration sites where CO2 is stored in sub-seabed geological formations. Two approaches were combined to determine the effects of the acidified conditions: (1) Shell microstructures and dissolution damage were analyzed using scanning electron microscopy (SEM) and (2) shell hardness was tested using nanoindentation. Microstructures of specimens reared at different pCO2 levels do not show significant changes in their size and shape. Likewise, the increase of pCO2 does not affect shell hardness. However, dissolution of ontogenetically younger portions of the shell becomes more severe with the increase of pCO2. Irrespective of pCO2, strong negative correlations exist between microstructure size and shell mechanics. An additional sample from the North Sea revealed the same microstructural-mechanical interdependency as the shells from the Baltic Sea. Our findings suggest that the skeletal structure of C. edule is not intensely influenced by pCO2 variations. Furthermore, our study indicates that naturally occurring shell mechanical property depends on the shell architecture at μm-scale.

  4. Thin elastic shells with variable thickness for lithospheric flexure of one-plate planets

    CERN Document Server

    Beuthe, Mikael

    2007-01-01

    Planetary topography can either be modeled as a load supported by the lithosphere, or as a dynamical effect due to lithospheric flexure caused by mantle convection. In both cases the response of the lithosphere to external forces can be calculated with the theory of thin elastic plates or shells. On one-plate planets the spherical geometry of the lithospheric shell plays an important role in the flexure mechanism. So far the equations governing the deformations and stresses of a spherical shell have only been derived under the assumption of a shell of constant thickness. However local studies of gravity and topography data suggest large variations in the thickness of the lithosphere. In this article we obtain the scalar flexure equations governing the deformations of a thin spherical shell with variable thickness or variable Young's modulus. The resulting equations can be solved in succession, except for a system of two simultaneous equations, the solutions of which are the transverse deflection and an associ...

  5. On Perturbation Solutions for Axisymmetric Bending Boundary Values of a Deep Thin Spherical Shell

    Directory of Open Access Journals (Sweden)

    Rong Xiao

    2014-01-01

    Full Text Available On the basis of the general theory of elastic thin shells and the Kirchhoff-Love hypothesis, a fundamental equation for a thin shell under the moment theory is established. In this study, the author derives Reissner’s equation with a transverse shear force Q1 and the displacement component w. These basic unknown quantities are derived considering the axisymmetry of the deep, thin spherical shell and manage to constitute a boundary value question of axisymmetric bending of the deep thin spherical shell under boundary conditions. The asymptotic solution is obtained by the composite expansion method. At the end of this paper, to prove the correctness and accuracy of the derivation, an example is given to compare the numerical solution by ANSYS and the perturbation solution. Meanwhile, the effects of material and geometric parameters on the nonlinear response of axisymmetric deep thin spherical shell under uniform external pressure are also analyzed in this paper.

  6. Morphology and properties of periwinkle shell asbestos-free brake pad

    Directory of Open Access Journals (Sweden)

    D.S. Yawas

    2016-01-01

    Full Text Available The development of asbestos-free automotive brake pad using periwinkle shell particles as frictional filler material is presented. This was with a view to exploiting the characteristics of the periwinkle shell, which is largely deposited as a waste, in replacing asbestos which has been found to be carcinogenic. Five sets of brake pads with different sieve size (710–125 μm of periwinkle shell particles with 35% resin were produced using compressive moulding. The physical, mechanical and tribological properties of the periwinkle shell particle-based brake pads were evaluated and compared with the values for the asbestos-based brake pads. The results obtained showed that compressive strength, hardness and density of the developed brake pad samples increased with decreasing the particle size of periwinkle shell from 710 to 125 μm, while the oil soak, water soak and wear rate decreased with decreasing the particle size of periwinkle shell. The results obtained at 125 μm of periwinkle shell particles compared favourably with that of commercial brake pad. The results of this research indicate that periwinkle shell particles can be effectively used as a replacement for asbestos in brake pad manufacture.

  7. Hard-hard coupling assisted anomalous magnetoresistance effect in amine-ended single-molecule magnetic junction

    Science.gov (United States)

    Tang, Y.-H.; Lin, C.-J.; Chiang, K.-R.

    2017-06-01

    We proposed a single-molecule magnetic junction (SMMJ), composed of a dissociated amine-ended benzene sandwiched between two Co tip-like nanowires. To better simulate the break junction technique for real SMMJs, the first-principles calculation associated with the hard-hard coupling between a amine-linker and Co tip-atom is carried out for SMMJs with mechanical strain and under an external bias. We predict an anomalous magnetoresistance (MR) effect, including strain-induced sign reversal and bias-induced enhancement of the MR value, which is in sharp contrast to the normal MR effect in conventional magnetic tunnel junctions. The underlying mechanism is the interplay between four spin-polarized currents in parallel and anti-parallel magnetic configurations, originated from the pronounced spin-up transmission feature in the parallel case and spiky transmission peaks in other three spin-polarized channels. These intriguing findings may open a new arena in which magnetotransport and hard-hard coupling are closely coupled in SMMJs and can be dually controlled either via mechanical strain or by an external bias.

  8. Ultrathin Interface Regime of Core-Shell Magnetic Nanoparticles for Effective Magnetism Tailoring.

    Science.gov (United States)

    Moon, Seung Ho; Noh, Seung-Hyun; Lee, Jae-Hyun; Shin, Tae-Hyun; Lim, Yongjun; Cheon, Jinwoo

    2017-02-08

    The magnetic exchange coupling interaction between hard and soft magnetic phases has been important for tailoring nanoscale magnetism, but spin interactions at the core-shell interface have not been well studied. Here, we systematically investigated a new interface phenomenon termed enhanced spin canting (ESC), which is operative when the shell thickness becomes ultrathin, a few atomic layers, and exhibits a large enhancement of magnetic coercivity (HC). We found that ESC arises not from the typical hard-soft exchange coupling but rather from the large magnetic surface anisotropy (KS) of the ultrathin interface. Due to this large increase in magnetism, ultrathin core-shell nanoparticles overreach the theoretical limit of magnetic energy product ((BH)max) and exhibit one of the largest values of specific loss power (SLP), which testifies to their potential capability as an effective mediator of magnetic energy conversion.

  9. Analysis of Thermodynamics of Liquid d- and f-Shell Metals with the Variational Approach

    Institute of Scientific and Technical Information of China (English)

    J. K. Baria

    2003-01-01

    We use recently proposed potential to calculate internal energy (enthalpy), entropy and Helmholtz free energy of liquid d- and f-shell metals with the variational approach. The parameter of the potential is determined with the standard zero pressure condition along with well established Taylor screening function for exchange and correlation effects to the liquid d- and f-shell metals. Here we clearly mention that the parameter of the potential is independent of any fitting procedure either with any experimental data or any theoretical values of any physical properties. The structure factor derived by Percus-Yevick solution for hard sphere fluids, which is characterized by hard sphere diameter, is used. A good agreement between theoretical investigations and experimental findings has confirmed the ability of the model potential to the liquid d- and f-shell metals.

  10. Multi-Shell Shell Model for Heavy Nuclei

    CERN Document Server

    Sun, Y; Sun, Yang; Wu, Cheng-Li

    2003-01-01

    Performing a shell model calculation for heavy nuclei has been a long-standing problem in nuclear physics. Here we propose one possible solution. The central idea of this proposal is to take the advantages of two existing models, the Projected Shell Model (PSM) and the Fermion Dynamical Symmetry Model (FDSM), to construct a multi-shell shell model. The PSM is an efficient method of coupling quasi-particle excitations to the high-spin rotational motion, whereas the FDSM contains a successful truncation scheme for the low-spin collective modes from the spherical to the well-deformed region. The new shell model is expected to describe simultaneously the single-particle and the low-lying collective excitations of all known types, yet keeping the model space tractable even for the heaviest nuclear systems.

  11. Stochastic Control - External Models

    DEFF Research Database (Denmark)

    Poulsen, Niels Kjølstad

    2005-01-01

    This note is devoted to control of stochastic systems described in discrete time. We are concerned with external descriptions or transfer function model, where we have a dynamic model for the input output relation only (i.e.. no direct internal information). The methods are based on LTI systems...

  12. Productivity Change and Externalities

    DEFF Research Database (Denmark)

    Kravtsova, Victoria

    2014-01-01

    firms and the economy as a whole. The approach used in the current research accounts for different internal as well as external factors that individual firms face and evaluates the effect on changes in productivity, technology as well as the efficiency of domestic firms. The empirical analysis focuses...... change in different types of firms and sectors of the economy...

  13. Multiple external root resorption.

    Science.gov (United States)

    Yusof, W Z; Ghazali, M N

    1989-04-01

    Presented is an unusual case of multiple external root resorption. Although the cause of this resorption was not determined, several possibilities are presented. Trauma from occlusion, periodontal and pulpal inflammation, and resorption of idiopathic origin are all discussed as possible causes.

  14. Characteristics of ultrafast K line hard x-ray source from femtosecond terawatt laser-produced plasma

    Institute of Scientific and Technical Information of China (English)

    陈敏; 陈建文; 高鸿奕; 陆培祥; 徐至展

    2003-01-01

    Theoretical studies and analytical scalings were carried out to find the optimized laser parameters and target conditions so that ultrashort hard x-ray pulses and high x-ray power could be achieved. The dependence of laser intensity and wavelength on the yield of K-shell x-ray emission was studied. We propose an optimal design for a foil target for producing high-yield hard x-ray pulses of customizing duration.

  15. Biomechanics of turtle shells: how whole shells fail in compression.

    Science.gov (United States)

    Magwene, Paul M; Socha, John J

    2013-02-01

    Turtle shells are a form of armor that provides varying degrees of protection against predation. Although this function of the shell as armor is widely appreciated, the mechanical limits of protection and the modes of failure when subjected to breaking stresses have not been well explored. We studied the mechanical properties of whole shells and of isolated bony tissues and sutures in four species of turtles (Trachemys scripta, Malaclemys terrapin, Chrysemys picta, and Terrapene carolina) using a combination of structural and mechanical tests. Structural properties were evaluated by subjecting whole shells to compressive and point loads in order to quantify maximum load, work to failure, and relative shell deformations. The mechanical properties of bone and sutures from the plastral region of the shell were evaluated using three-point bending experiments. Analysis of whole shell structural properties suggests that small shells undergo relatively greater deformations before failure than do large shells and similar amounts of energy are required to induce failure under both point and compressive loads. Location of failures occurred far more often at sulci than at sutures (representing the margins of the epidermal scutes and the underlying bones, respectively), suggesting that the small grooves in the bone created by the sulci introduce zones of weakness in the shell. Values for bending strength, ultimate bending strain, Young's modulus, and energy absorption, calculated from the three-point bending data, indicate that sutures are relatively weaker than the surrounding bone, but are able to absorb similar amounts of energy due to higher ultimate strain values. Copyright © 2012 Wiley Periodicals, Inc.

  16. Integrated shell approach to vertical position control on PBX-M

    Energy Technology Data Exchange (ETDEWEB)

    Hatcher, R.E.; Okabayashi, M.

    1995-03-01

    The PBX-M device produces highly shaped discharges that, because of the negative external magnetic field decay index required, are vertically unstable. Vertical positional stability in PBX-M has been achieved by directly controlling the n = 0 component of the eddy current in the passive shell instead of the commonly used function of magnetic flux signals. Because the active coil is controlled via currents in the passive shell we call this an ``integrated shell`` approach to vertical position control. We present results of these experiments and make comparisons between the two methods of control.

  17. Comparative study on thermal performance of natural draft cooling towers with finned shells

    Energy Technology Data Exchange (ETDEWEB)

    Goodarzi, Mohsen [Bu-Ali Sina Univ., Hamedan (Iran, Islamic Republic of). Dept. of Mechanical Engineering

    2016-10-15

    The cooling efficiency of natural draft cooling towers under crosswind condition should be improved. In the present research work three different externally finned shells were considered for a typical natural draft cooling tower to investigate the cooling improvement. They were numerically simulated under normal and crosswind conditions. Numerical results show that twisting four fin plates over the tower shell along the 45 peripheral angle, could improve the cooling efficiency up to 6.5 %. Because of the periodic shape of the fin plates, the cooling efficiency of the cooling tower with finned shell is less sensitive to the change of wind.

  18. Effect of a cylindrical thin-shell of matter on the electrostatic self-force on a charge

    Energy Technology Data Exchange (ETDEWEB)

    Rubin de Celis, Emilio [Universidad de Buenos Aires y IFIBA, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Buenos Aires (Argentina)

    2016-02-15

    The electrostatic self-force on a point charge in cylindrical thin-shell space-times is interpreted as the sum of a bulk field and a shell field. The bulk part corresponds to a field sourced by the test charge placed in a space-time without the shell. The shell field accounts for the discontinuity of the extrinsic curvature κ{sup p}{sub q}. An equivalent electric problem is stated, in which the effect of the shell of matter on the field is reconstructed with the electric potential produced by a non-gravitating charge distribution of total image charge Q, to interpret the shell field in both the interior and exterior regions of the space-time. The self-force on a point charge q in a locally flat geometry with a cylindrical thin-shell of matter is calculated. The charge is repelled from the shell if κ{sup p}{sub q} = κ < 0 (ordinarymatter) and attracted toward the shell if κ > 0 (exotic matter). The total image charge is zero for exterior problems, while for interior problems Q/q = κr{sub e}, with re the external radius of the shell. The procedure is general and can be applied to interpret self-forces in other space-times with shells, e.g., for locally flat wormholes we found Q{sub -+}{sup wh}/q = -1/(κ{sub wh}r{sub ±}). (orig.)

  19. Unified approach to hard diffraction

    CERN Document Server

    Peschanski, R

    2001-01-01

    Using a combination of S-Matrix and perturbative QCD properties in the small x_{Bj} regime, we propose a formulation of hard diffraction unifying the partonic (Ingelman-Schlein) Pomeron, Soft Colour Interaction and QCD dipole descriptions.

  20. Lineage tracing of the bivalve shell field with special interest in the descendants of the 2d blastomere.

    Science.gov (United States)

    Mohri, Masakuni; Hashimoto, Naoki; Wada, Hiroshi

    2016-03-01

    By evolving bilaterally separated shell plates, bivalves acquired a unique body plan in which their soft tissues are completely protected by hard shell plates. In this unique body plan, mobility between the separated shell plates is provided by novel structures such as a ligament and adductor muscles. As a first step towards understanding how the bivalve body plan was established, we investigated the development of the separated shell plates and ligament. Over 100 years ago, it was hypothesized that the development of separated shell plates is tightly linked with the unique cell cleavage (division) pattern of bivalves during development, wherein each bilateral daughter cell of the 2d descendant 2d(1121) develops into one of the bilateral shell fields. In this study, we tested this hypothesis by tracing the cell lineages of the Japanese purple mussel Septifer virgatus. Although the shell fields were found to be exclusively derived from the bilateral descendant cells of 2d: 2d(11211) and 2d(11212), the descendants of these cells were not restricted to shell fields alone, nor were they confined to the left or right side of the shell field based on their lineage. Our study demonstrated that ligament cells are also derived from 2d(11211) and 2d(11212), indicating that the ligament cells emerged as a subpopulation of shell field cells. This also suggests that the establishment of the novel developmental system for the ligament cells was critical for the evolution of the unique body plan of bivalves.

  1. Shell Trumpets from Western Mexico

    Directory of Open Access Journals (Sweden)

    Robert Novella

    1991-11-01

    Full Text Available Marine shells have been used as musical instruments in almost all parts of the world (Izikowitz 1935, including Mesoamerica, where large univalves, also called conch shells in the literature, had a utilitarian function as trumpets. Their use is well documented in most cultural areas of Mesoamerica, as in Western Mexico, through their various occurrences in archaeological contexts and museums collections.

  2. Shell model and spectroscopic factors

    Energy Technology Data Exchange (ETDEWEB)

    Poves, P. [Madrid Univ. Autonoma and IFT, UAM/CSIC, E-28049 (Spain)

    2007-07-01

    In these lectures, I introduce the notion of spectroscopic factor in the shell model context. A brief review is given of the present status of the large scale applications of the Interacting Shell Model. The spectroscopic factors and the spectroscopic strength are discussed for nuclei in the vicinity of magic closures and for deformed nuclei. (author)

  3. Biomineralisation in Mollusc shells

    Science.gov (United States)

    Dauphin, Y.; Cuif, J. P.; Salomé, M.; Williams, C. T.

    2009-04-01

    The main components of Mollusc shells are carbonate minerals: calcite and aragonite. ACC is present in larval stages. Calcite and aragonite can be secreted simultaneously by the mantle. Despite the small number of varieties, the arrangement of the mineral components is diverse, and dependant upon the taxonomy. They are also associated with organic components much more diverse, the diversity of which reflects the large taxonomic diversity. From TGA analyses, the organic content (water included) is high (>5% in some layers). The biomineralisation process is not a passive precipitation process, but is strongly controlled by the organism. The biological-genetic control is shown by the constancy of the arrangement of the layers, the mineralogy and the microstructure in a given species. Microstructural units (i.e. tablets, prisms etc.) have shapes that do not occur in non-biogenic counterparts. Nacreous tablets, for example, are flattened on their crystallographic c axis, which is normally the axis of maximum growth rate for non-biogenic aragonite. Morever, their inner structure is species-specific: the arrangements of nacreous tablets in Gastropoda - Cephalopoda, and in Bivalvia differ, and the inner arrangement of the nacreous tablets is different in ectocochlear and endocochlear Cephalopoda. The organic-mineral ratios also differ in the various layers of a shell. Differences in chemical composition also demonstrates the biological-genetic control: for example, aragonite has a low Sr content unknown in non-biogenic samples; two aragonitic layers in a shell have different Sr and Mg contents, S is higher in calcitic layers. Decalcification releases soluble (SOM) and insoluble (IOM) organic components. Insoluble components form the main part of the intercrystalline membranes, and contain proteins, polysaccharides and lipids. Soluble phases are present within the crystals and the intercrystalline membranes. These phases are composed of more or less glycosylated proteins

  4. Mapping the Two-Component Atomic Fermi Gas to the Nuclear Shell-Model

    DEFF Research Database (Denmark)

    Özen, C.; Zinner, Nikolaj Thomas

    2014-01-01

    of the external potential becomes important. A system of two-species fermionic cold atoms with an attractive zero-range interaction is analogous to a simple model of nucleus in which neutrons and protons interact only through a residual pairing interaction. In this article, we discuss how the problem of a two......-component atomic fermi gas in a tight external trap can be mapped to the nuclear shell model so that readily available many-body techniques in nuclear physics, such as the Shell Model Monte Carlo (SMMC) method, can be directly applied to the study of these systems. We demonstrate an application of the SMMC method...

  5. Magnetic properties of Ni/Au core/shell studied by Monte Carlo simulations

    Energy Technology Data Exchange (ETDEWEB)

    Masrour, R., E-mail: rachidmasrour@hotmail.com [Laboratory of Materials, Processes, Environment and Quality, Cady Ayyed University, National School of Applied Sciences, Sidi Bouzid, Safi, 63 4600 (Morocco); LMPHE (URAC 12), Faculté des Sciences, Université Mohammed V-Agdal, Av. Ibn Batouta, B.P. 1014, Rabat (Morocco); Bahmad, L. [LMPHE (URAC 12), Faculté des Sciences, Université Mohammed V-Agdal, Av. Ibn Batouta, B.P. 1014, Rabat (Morocco); Hamedoun, M. [Institute of Nanomaterials and Nanotechnologies, MAScIR, Rabat (Morocco); Benyoussef, A. [LMPHE (URAC 12), Faculté des Sciences, Université Mohammed V-Agdal, Av. Ibn Batouta, B.P. 1014, Rabat (Morocco); Institute of Nanomaterials and Nanotechnologies, MAScIR, Rabat (Morocco); Hassan II Academy of Science and Technology, Rabat (Morocco); Hlil, E.K. [Institut Néel, CNRS et Université Joseph Fourier, BP 166, F-38042 Grenoble cedex 9 (France)

    2014-01-10

    The magnetic properties of ferromagnetic Ni/Au core/shell have been studied using Monte Carlo simulations within the Ising model framework. The considered Hamiltonian includes the exchange interactions between Ni–Ni, Au–Au and Ni–Au and the external magnetic field. The thermal total magnetizations and total magnetic susceptibilities of core/shell Ni/Au are computed. The critical temperature is deduced. The exchange interaction between Ni and Au atoms is obtained. In addition, the total magnetizations versus the external magnetic field and crystal filed for different temperature are also established.

  6. Plate shell structures - statics and stability

    DEFF Research Database (Denmark)

    Almegaard, Henrik

    2008-01-01

    This paper describes the basic structural system, statics and spatial stability of plate shells. The structural system can be considered as a single layer of planar elements, where each element only transfers in-plane (membrane) forces to its neighbouring elements. External out-of-plane loads...... are carried into the structure as in-plane forces by plate action in each element. These in-plane forces are then carried through the plate structure to the supports as in-plane forces by membrane action. The consequence is that the spatial stability of the structure can be simply analysed by considering...... the plate system as only subject to in-plane loads. The stability of such systems is based on the fact that each plane element is held fixed in space by three fixed support lines and that these support lines can be provided by three plane neighbour elements. This means that the spatial stability of a plate...

  7. Topological magnetic solitons on a paraboloidal shell

    Energy Technology Data Exchange (ETDEWEB)

    Vilas-Boas, Priscila S.C. [Universidade do Estado da Bahia, Campus VII, BR 402, 48970-000, Senhor do Bonfim, BA (Brazil); Elias, Ricardo G.; Altbir, Dora [Departamento de Física, Universidad de Santiago de Chile and CEDENNA, Avda. Ecuador 3493, Santiago (Chile); Fonseca, Jakson M. [Universidade Federal de Viçosa, Departamento de Física, Avenida Peter Henry Rolfs s/n, 36570-000, Viçosa, MG (Brazil); Carvalho-Santos, Vagson L., E-mail: vagson.carvalho@usach.cl [Departamento de Física, Universidad de Santiago de Chile and CEDENNA, Avda. Ecuador 3493, Santiago (Chile); Instituto Federal de Educação, Ciência e Tecnologia Baiano, Campus Senhor do Bonfim, Km 04 Estrada da Igara, 48970-000 Senhor do Bonfim, Bahia (Brazil)

    2015-01-02

    We study the influence of curvature on the exchange energy of skyrmions and vortices on a paraboloidal surface. It is shown that such structures appear as excitations of the Heisenberg model, presenting topological stability, unlike what happens on other simply-connected geometries such as pseudospheres. We also show that the skyrmion width depends on the geometrical parameters of the paraboloid. The presence of a magnetic field leads to the appearance of 2π-skyrmions, introducing a new characteristic length into the system. Regarding vortices, the geometrical parameters of the paraboloid play an important role in the exchange energy of this excitation. - Highlights: • Curvature-induced change in the width of a skyrmion on a paraboloid. • Presence of 2π-skyrmions due to the interaction with external fields. • Changes in the width of a skyrmion induced by magnetic fields. • Coupling between magnetic field and curvature. • Prediction of vortex repulsion due to a paraboloidal shell.

  8. Plate shell structures of glass

    DEFF Research Database (Denmark)

    Bagger, Anne

    . This modelling technique is used to model a plate shell structure with a span of 11.5 meters in the FE software \\textsc{Abaqus}. The structure is analyzed with six different connection details with varying stiffness characteristics, to investigate the influence of these characteristics on the structural effects...... University, a script has been developed for an automated generation of a given plate shell geometry and a corresponding finite element (FE) model. A suitable FE modelling technique is proposed, suggesting a relatively simple method of modelling the connection detail's stiffness characteristics....... Based on these investigations, and FE analysis of other plate shell models, the structural behaviour is described. Possible methods of estimating the stresses in a given plate shell structure are proposed. The non-linear behaviour of a plate shell structure is investigated for varying parameters...

  9. Composite shell spacecraft seat

    Science.gov (United States)

    Barackman, Victor J. (Inventor); Pulley, John K. (Inventor); Simon, Xavier D. (Inventor); McKee, Sandra D. (Inventor)

    2008-01-01

    A two-part seat (10) providing full body support that is specific for each crew member (30) on an individual basis. The two-part construction for the seat (10) can accommodate many sizes and shapes for crewmembers (30) because it is reconfigurable and therefore reusable for subsequent flights. The first component of the two-part seat construction is a composite shell (12) that surrounds the crewmember's entire body and is generically fitted to their general size in height and weight. The second component of the two-part seat (10) is a cushion (20) that conforms exactly to the specific crewmember's entire body and gives total body support in more complex environment.

  10. ExternE transport methodology for external cost evaluation of air pollution

    DEFF Research Database (Denmark)

    Jensen, S. S.; Berkowicz, R.; Brandt, J.

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summaris...

  11. The External Mind

    DEFF Research Database (Denmark)

    The External Mind: an Introduction by Riccardo Fusaroli, Claudio Paolucci pp. 3-31 The sign of the Hand: Symbolic Practices and the Extended Mind by Massimiliano Cappuccio, Michael Wheeler pp. 33-55 The Overextended Mind by Shaun Gallagher pp. 57-68 The "External Mind": Semiotics, Pragmatism......, Extended Mind and Distributed Cognition by Claudio Paolucci pp. 69-96 The Social Horizon of Embodied Language and Material Symbols by Riccardo Fusaroli pp. 97-123 Semiotics and Theories of Situated/Distributed Action and Cognition: a Dialogue and Many Intersections by Tommaso Granelli pp. 125-167 Building...... Action in Public Environments with Diverse Semiotic Resources by Charles Goodwin pp. 169-182 How Marking in Dance Constitutes Thinking with the Body by David Kirsh pp. 183-214 Ambiguous Coordination: Collaboration in Informal Science Education Research by Ivan Rosero, Robert Lecusay, Michael Cole pp. 215-240...

  12. External-Memory Multimaps

    CERN Document Server

    Angelino, Elaine; Mitzenmacher, Michael; Thaler, Justin

    2011-01-01

    Many data structures support dictionaries, also known as maps or associative arrays, which store and manage a set of key-value pairs. A \\emph{multimap} is generalization that allows multiple values to be associated with the same key. For example, the inverted file data structure that is used prevalently in the infrastructure supporting search engines is a type of multimap, where words are used as keys and document pointers are used as values. We study the multimap abstract data type and how it can be implemented efficiently online in external memory frameworks, with constant expected I/O performance. The key technique used to achieve our results is a combination of cuckoo hashing using buckets that hold multiple items with a multiqueue implementation to cope with varying numbers of values per key. Our external-memory results are for the standard two-level memory model.

  13. LC and ferromagnetic resonance in soft/hard magnetic microwires

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Bin, E-mail: milesbintian@gmail.com [Wuhan Institute of Technology, 430073 Wuhan (China); Institute of Materials Science of Madrid, CSIC, 28049 Madrid (Spain); Vazquez, Manuel [Institute of Materials Science of Madrid, CSIC, 28049 Madrid (Spain)

    2015-12-01

    The magnetic behavior of soft/hard biphase microwires is introduced here. The microwires consist of a Co{sub 59.1}Fe{sub 14.8}Si{sub 10.2}B{sub 15.9} soft magnetic nucleus and a Co{sub 90}Ni{sub 10} hard outer shell separated by an intermediate insulating Pyrex glass microtube. By comparing the resistance spectrums of welding the ends of metallic core (CC) or welding the metallic core and outer shell (CS) to the connector, it is found that one of the two peaks in the resistance spectrum is because the LC resonance depends on the inductor and capacitors in which one is the capacitor between the metallic core and outer shell, and the other is between the outer shell and connector. Correspondingly, another peak is for the ferromagnetic resonance of metallic core. After changing the capacitance of the capacitors, the frequency of LC resonance moves to high frequency band, and furthermore, the peak of LC resonance in the resistance spectrum disappeared. These magnetostatically coupled biphase systems are thought to be of large potential interest as sensing elements in sensor devices. - Graphical abstract: By comparing the resistance spectrums of welding the ends of metallic core (CC) or welding the metallic core and outer shell (CS) to the connector, it is found that one of the two peaks in the resistance spectrum is because of the LC resonance depending on the inductor and capacitors. Correspondingly, another peak is for the ferromagnetic resonance of metallic core. After changing the capacitance of the capacitors, the frequency of LC resonance moves to high frequency band, and furthermore, the peak of LC resonance in the resistance spectrum disappeared. - Highlights: • The two peaks spectra of multilayer microwires, CoFeSiB/CoNi, with magnetic biphase behavior have been reported. • One of the two absorption peaks is because of the ferromagnetic resonance of metallic core. • The other absorption peak is because of the LC resonance which depends on the capacitors

  14. Improved hard-thermal-loop effective action for hot QED and QCD

    CERN Document Server

    Flechsig, F; Flechsig, Fritjof; Rebhan, Anton K

    1995-01-01

    The conventional results for hard thermal loops, which are the building blocks of resummed perturbation theory in thermal field theories, have collinear singularities when external momenta are light-like. It is shown that by taking into account asymptotic thermal masses these singularities are removed. The thus improved hard thermal loops can be summarized by compact gauge-invariant effective actions, generalizing the ones found by Taylor and Wong, and by Braaten and Pisarski.

  15. Hexagonal Boron Nitride-Graphene Core-Shell Arrays Formed by Self-Symmetrical Etching Growth.

    Science.gov (United States)

    Wang, Chenxiao; Zuo, Junlai; Tan, Lifang; Zeng, Mengqi; Zhang, Qiqi; Xia, Huinan; Zhang, Wenhao; Fu, Yingshuang; Fu, Lei

    2017-09-20

    The synthesis and integration of core-shell materials have been extensively explored in three-dimensional nanostructures, while they are hardly ever extended into the emerging two-dimensional (2D) research field. Herein, demonstrated by graphene (G) and hexagonal boron nitride (h-BN) and via a sequential chemical vapor deposition method, we succeed for the first time in synthesizing 2D h-BN-G core-shell arrays (CSA), which possess extremely high uniformity in shapes, sizes and distributions. Each of the core-shell unit is composed of G ring-shaped shell internally filled with h-BN circular core. In addition, we perform simulations to further explain the self-symmetrical etching growth mechanism of the h-BN-G CSA, demonstrating its potential to be used as an efficient synthetic method suitable for other 2D CSA systems.

  16. Magnetically self-assembled SrFe12O19/Fe-Co core/shell particles

    Energy Technology Data Exchange (ETDEWEB)

    Xu, X; Park, J; Hong, YK; Lane, AM

    2015-02-15

    Epitaxial growth to synthesize core/shell-structured materials is limited because large lattice mismatches are common between materials. Magnetically hard/soft, core/shell-structured materials can be potentially used for rare-earth free permanent magnets, but their synthesis presents a challenge. We report a wet chemistry method to synthesize core/shell structured particles consisting of a magnetically hard SrFe12O19 core and a soft Fe-Co shell, with a lattice mismatch of similar to 100%, which cannot be achieved by conventional epitaxial growth or other alternative methods. When decreasing the size of the magnetically soft Fe-Co nanoclusters to below 5 nm, we show that they can be magnetically attracted by the hard SrFe12O19 to form core/shell structured particles. An AC demagnetization experiment demonstrates the formation mechanism of the core/shell particles, and their magnetic hysteresis loop shows potential for use as rare-earth free permanent magnets. Published by Elsevier B.V.

  17. Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063 alloy composites

    Directory of Open Access Journals (Sweden)

    Oluyemi O. DARAMOLA

    2015-12-01

    Full Text Available Aluminium 6063/Coconut shell ash (CSAp composites having 3-12 weight percent (wt% coconut shell ash were fabricated by double stir-casting method. The microstructure, ultimate tensile strength, hardness values, density and corrosion behaviour in 0.3M H2SO4 and 3.5wt% NaCl solution of the composites were evaluated. The density of the composites exhibit a linear and proportional decreased as the percentage of coconut shell ash increases in the aluminium alloy. It implies that composites with lower weight component can be produced by adding CSAp. The microstructural analysis showed uniform distribution of coconut shell ash particles in the aluminium alloy matrix. Significant improvement in hardness and ultimate tensile strength values was noticeable as the wt% of the coconut shell ash increased in the alloy, although this occur at the expense of ductility of the composites as the modulus of elasticity of the composites decreases as the percentage of CSAp increases. Hence, this work has established that incorporation of coconut shell particles in aluminum matrix can lead to the production of low cost aluminum composites with improved hardness and tensile strength values.

  18. NANOCOMPOSITE COATINGS WITH ENHANCED HARDNESS

    Institute of Scientific and Technical Information of China (English)

    J. Musil

    2005-01-01

    The article reviews the present state of the art in the magnetron sputtering of hart and superhard nanocomposite coatings. It is shown that there are (1) two groups of hard and superhard nanocomposites: (i) nc-MN/hard phase and (ii) nc-MN/soft phase, (2) three possible origins of the enhanced hardness: (i) dislocation-dominated plastic deformation, (ii) cohesive forces between atoms and (iii) nanostructure of materials, and (3) huge differences in the microstructure of single- and two-phase films. A main attention is devoted to the formation of nanocrystalline and/or X-ray amorphous films. Such films are created in a vicinity of transitions between (i)crystalline and amorphous phases, (ii) two crystalline phases of different chemical composition or (iii) two different preferred orientations of grains of the sane material from which the coating is composed. The existence of the last transition makes it possible to explain the enhanced hardness in single-phase films. The thermal stability and oxidation resistance of hard nanocomposite films is also shortly discussed.

  19. Tuning plasmonic cloaks with an external magnetic field

    CERN Document Server

    Kort-Kamp, W J M; Pinheiro, F A; Farina, C

    2013-01-01

    We propose a mechanism to actively tune the operation of plasmonic cloaks with an external magnetic field by investigating electromagnetic scattering by a dielectric cylinder coated with a magneto-optical shell. In the long wavelength limit we show that the presence of an external magnetic field may drastically reduce the scattering cross-section at all observation angles. We demonstrate that the application of external magnetic fields can modify the operation wavelength without the need of changing material and/or geometrical parameters. We also show that applied magnetic fields can reversibly switch on and off the cloak operation. These results, which could be achieved for existing magneto-optical materials, are shown to be robust to material losses, so that they may pave the way for developing actively tunable, versatile plasmonic cloaks.

  20. MicroShell Minimalist Shell for Xilinx Microprocessors

    Science.gov (United States)

    Werne, Thomas A.

    2011-01-01

    MicroShell is a lightweight shell environment for engineers and software developers working with embedded microprocessors in Xilinx FPGAs. (MicroShell has also been successfully ported to run on ARM Cortex-M1 microprocessors in Actel ProASIC3 FPGAs, but without project-integration support.) Micro Shell decreases the time spent performing initial tests of field-programmable gate array (FPGA) designs, simplifies running customizable one-time-only experiments, and provides a familiar-feeling command-line interface. The program comes with a collection of useful functions and enables the designer to add an unlimited number of custom commands, which are callable from the command-line. The commands are parameterizable (using the C-based command-line parameter idiom), so the designer can use one function to exercise hardware with different values. Also, since many hardware peripherals instantiated in FPGAs have reasonably simple register-mapped I/O interfaces, the engineer can edit and view hardware parameter settings at any time without stopping the processor. MicroShell comes with a set of support scripts that interface seamlessly with Xilinx's EDK tool. Adding an instance of MicroShell to a project is as simple as marking a check box in a library configuration dialog box and specifying a software project directory. The support scripts then examine the hardware design, build design-specific functions, conditionally include processor-specific functions, and complete the compilation process. For code-size constrained designs, most of the stock functionality can be excluded from the compiled library. When all of the configurable options are removed from the binary, MicroShell has an unoptimized memory footprint of about 4.8 kB and a size-optimized footprint of about 2.3 kB. Since MicroShell allows unfettered access to all processor-accessible memory locations, it is possible to perform live patching on a running system. This can be useful, for instance, if a bug is

  1. Hard Diffraction at D{phi}

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Gilvan A. [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil). Lab. de Cosmologia e Fisica Experimental de Altas Energias

    2000-07-01

    Full text follows: We review recent Hard Diffraction results from the D{phi} experiment at Fermilab, for the following processes: hard color singlet exchange, hard single diffraction, and hard double pomeron exchange. Measurements of rates, {eta}, E{sub T} and {radical}S dependencies are presented and comparisons made with predictions of several models. (author)

  2. Hypersonic vibrations of Ag@SiO2 (cubic core)-shell nanospheres.

    Science.gov (United States)

    Sun, Jing Ya; Wang, Zhi Kui; Lim, Hock Siah; Ng, Ser Choon; Kuok, Meng Hau; Tran, Toan Trong; Lu, Xianmao

    2010-12-28

    The intriguing optical and catalytic properties of metal-silica core-shell nanoparticles, inherited from their plasmonic metallic cores together with the rich surface chemistry and increased stability offered by their silica shells, have enabled a wide variety of applications. In this work, we investigate the confined vibrational modes of a series of monodisperse Ag@SiO(2) (cubic core)-shell nanospheres synthesized using a modified Stöber sol-gel method. The particle-size dependence of their mode frequencies has been mapped by Brillouin light scattering, a powerful tool for probing hypersonic vibrations. Unlike the larger particles, the observed spheroidal-like mode frequencies of the smaller ones do not scale with inverse diameter. Interestingly, the onset of the deviation from this linearity occurs at a smaller particle size for higher-energy modes than for lower-energy ones. Finite element simulations show that the mode displacement profiles of the Ag@SiO(2) core-shells closely resemble those of a homogeneous SiO(2) sphere. Simulations have also been performed to ascertain the effects that the core shape and the relative hardness of the core and shell materials have on the vibrations of the core-shell as a whole. As the vibrational modes of a particle have a bearing on its thermal and mechanical properties, the findings would be of value in designing core-shell nanostructures with customized thermal and mechanical characteristics.

  3. Regularization by External Variables

    DEFF Research Database (Denmark)

    Bossolini, Elena; Edwards, R.; Glendinning, P. A.

    2016-01-01

    Regularization was a big topic at the 2016 CRM Intensive Research Program on Advances in Nonsmooth Dynamics. There are many open questions concerning well known kinds of regularization (e.g., by smoothing or hysteresis). Here, we propose a framework for an alternative and important kind of regula...... of regularization, by external variables that shadow either the state or the switch of the original system. The shadow systems are derived from and inspired by various applications in electronic control, predator-prey preference, time delay, and genetic regulation....

  4. Hard Diffraction in Pythia 8

    CERN Document Server

    Rasmussen, Christine O

    2015-01-01

    We present an overview of the options for diffraction implemented in the general--purpose event generator Pythia 8. We review the existing model for low-- and high--mass soft diffraction and present a new model for hard diffraction in pp and ppbar collisions. Both models uses the Pomeron approach pioneered by Ingelman and Schlein, factorising the single diffractive cross section into a Pomeron flux and a Pomeron PDF. The model for hard diffraction is implemented as a part of the multiparton interactions framework, thereby introducing a dynamical rapidity gap survival probability that explicitly breaks factorisation.

  5. Hard Diffraction in Pythia 8

    CERN Document Server

    Rasmussen, Christine O

    2015-01-01

    We present an overview of the options for diffraction implemented in the general-purpose event generator Pythia 8. We review the existing model for soft diffraction and present a new model for hard diffraction. Both models use the Pomeron approach pioneered by Ingelman and Schlein, factorising the diffractive cross section into a Pomeron flux and a Pomeron PDF, with several choices for both implemented in Pythia 8. The model of hard diffraction is implemented as a part of the multiparton interactions (MPI) framework, thus introducing a dynamical gap survival probability that explicitly breaks factorisation.

  6. Hard diffraction in Pythia 8

    Science.gov (United States)

    Overgaard Rasmussen, Christine

    2016-07-01

    We present an overview of the options for diffraction implemented in the general-purpose event generator Pythia 8 [1]. We review the existing model for soft diffraction and present a new model for hard diffraction. Both models use the Pomeron approach pioneered by Ingelman and Schlein, factorising the diffractive cross section into a Pomeron flux and a Pomeron PDF, with several choices for both implemented in Pythia 8. The model of hard diffraction is implemented as a part of the multiparton interactions (MPI) framework, thus introducing a dynamical gap survival probability that explicitly breaks factorisation.

  7. Junction conditions in quadratic gravity: thin shells and double layers

    CERN Document Server

    Reina, Borja; Vera, Raül

    2015-01-01

    The junction conditions for the most general gravitational theory with a Lagrangian containing terms quadratic in the curvature are derived. We include the cases with a possible concentration of matter on the joining hypersurface -termed as thin shells, domain walls or braneworlds in the literature- as well as the proper matching conditions where only finite jumps of the energy-momentum tensor are allowed. In the latter case we prove that the matching conditions are more demanding than in General Relativity. In the former case, we show that generically the shells/domain walls are of a new kind because they possess, in addition to the standard energy-momentum tensor, a double layer energy-momentum contribution which actually induces an external energy flux vector and an external scalar pressure/tension on the shell. We prove that all these contributions are necessary to make the entire energy-momentum tensor divergence-free, and we present the field equations satisfied by these energy-momentum quantities. The ...

  8. Junction conditions in quadratic gravity: thin shells and double layers

    Science.gov (United States)

    Reina, Borja; Senovilla, José M. M.; Vera, Raül

    2016-05-01

    The junction conditions for the most general gravitational theory with a Lagrangian containing terms quadratic in the curvature are derived. We include the cases with a possible concentration of matter on the joining hypersurface—termed as thin shells, domain walls or braneworlds in the literature—as well as the proper matching conditions where only finite jumps of the energy-momentum tensor are allowed. In the latter case we prove that the matching conditions are more demanding than in general relativity. In the former case, we show that generically the shells/domain walls are of a new kind because they possess, in addition to the standard energy-momentum tensor, a double layer energy-momentum contribution which actually induces an external energy flux vector and an external scalar pressure/tension on the shell. We prove that all these contributions are necessary to make the entire energy-momentum tensor divergence-free, and we present the field equations satisfied by these energy-momentum quantities. The consequences of all these results are briefly analyzed.

  9. Pro Windows PowerShell

    CERN Document Server

    Deshev, Hristo

    2008-01-01

    Targeted at professionals who handle a lot of repetitive tasks, this title serves as not only a tutorial, but also a reference. It shows how PowerShell can help professionals script most system administration tasks and reduce their burden.

  10. Instant Windows PowerShell

    CERN Document Server

    Menon, Vinith

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A practical, hands-on tutorial approach that explores the concepts of PowerShell in a friendly manner, taking an adhoc approach to each topic.If you are an administrator who is new to PowerShell or are looking to get a good grounding in these new features, this book is ideal for you. It's assumed that you will have some experience in PowerShell and Windows Server, as well being familiar with the PowerShell command-line.

  11. Patterning of the turtle shell.

    Science.gov (United States)

    Moustakas-Verho, Jacqueline E; Cebra-Thomas, Judith; Gilbert, Scott F

    2017-08-01

    Interest in the origin and evolution of the turtle shell has resulted in a most unlikely clade becoming an important research group for investigating morphological diversity in developmental biology. Many turtles generate a two-component shell that nearly surrounds the body in a bony exoskeleton. The ectoderm covering the shell produces epidermal scutes that form a phylogenetically stable pattern. In some lineages, the bones of the shell and their ectodermal covering become reduced or lost, and this is generally associated with different ecological habits. The similarity and diversity of turtles allows research into how changes in development create evolutionary novelty, interacting modules, and adaptive physiology and anatomy. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Coendangered hard-ticks: threatened or threatening?

    Directory of Open Access Journals (Sweden)

    Cozma Vasile

    2011-05-01

    Full Text Available Abstract The overwhelming majority of animal conservation projects are focused on vertebrates, despite most of the species on Earth being invertebrates. Estimates state that about half of all named species of invertebrates are parasitic in at least one stage of their development. The dilemma of viewing parasites as biodiversity or pest has been discussed by several authors. However, ticks were omitted. The latest taxonomic synopses of non-fossil Ixodidae consider valid 700 species. Though, how many of them are still extant is almost impossible to tell, as many of them are known only from type specimens in museums and were never collected since their original description. Moreover, many hosts are endangered and as part of conservation efforts of threatened vertebrates, a common practice is the removal of, and treatment for external parasites, with devastating impact on tick populations. There are several known cases when the host became extinct with subsequent coextinction of their ectoparasites. For our synoptic approach we have used the IUCN status of the host in order to evaluate the status of specifically associated hard-ticks. As a result, we propose a number of 63 coendangered and one extinct hard-tick species. On the other side of the coin, the most important issue regarding tick-host associations is vectorial transmission of microbial pathogens (i.e. viruses, bacteria, protozoans. Tick-borne diseases of threatened vertebrates are sometimes fatal to their hosts. Mortality associated with pathogens acquired from ticks has been documented in several cases, mostly after translocations. Are ticks a real threat to their coendangered host and should they be eliminated? Up to date, there are no reliable proofs that ticks listed by us as coendangered are competent vectors for pathogens of endangered animals.

  13. Rotating thin-shell wormhole

    Science.gov (United States)

    Ovgun, A.

    2016-11-01

    We construct a rotating thin-shell wormhole using a Myers-Perry black hole in five dimensions, using the Darmois-Israel junction conditions. The stability of the wormhole is analyzed under perturbations. We find that exotic matter is required at the throat of the wormhole to keep it stable. Our analysis shows that stability of the rotating thin-shell wormhole is possible if suitable parameter values are chosen.

  14. 40 Years of Shell Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Shell has been using scenario planning for four decades. During that time these scenarios have helped the company and governments across the world to make better strategic choices. Scenarios provide lenses that help see future prospects more clearly, make richer judgments and be more sensitive to uncertainties. Discover how the Shell Scenarios team has helped guide decision makers at major moments in history and get a peek at the team future focus, including the intricate relationship between energy, water and food.

  15. Rotating Thin-Shell Wormhole

    CERN Document Server

    Ovgun, A

    2016-01-01

    In this article, we construct rotating thin shell wormhole using a Myers-Perry black hole in five dimensions. The stability of the wormhole is analyzed under perturbations follows from the Darmois-Israel junction conditions. We find that it required exotic matter at the throat to keep throat of wormhole stable. Our analysis shows that the stability of the rotating thin-shell wormhole is available with choosing suitable values of parameters.

  16. Electrostatics-driven shape transitions in soft shells.

    Science.gov (United States)

    Jadhao, Vikram; Thomas, Creighton K; Olvera de la Cruz, Monica

    2014-09-02

    Manipulating the shape of nanoscale objects in a controllable fashion is at the heart of designing materials that act as building blocks for self-assembly or serve as targeted drug delivery carriers. Inducing shape deformations by controlling external parameters is also an important way of designing biomimetic membranes. In this paper, we demonstrate that electrostatics can be used as a tool to manipulate the shape of soft, closed membranes by tuning environmental conditions such as the electrolyte concentration in the medium. Using a molecular dynamics-based simulated annealing procedure, we investigate charged elastic shells that do not exchange material with their environment, such as elastic membranes formed in emulsions or synthetic nanocontainers. We find that by decreasing the salt concentration or increasing the total charge on the shell's surface, the spherical symmetry is broken, leading to the formation of ellipsoids, discs, and bowls. Shape changes are accompanied by a significant lowering of the electrostatic energy and a rise in the surface area of the shell. To substantiate our simulation findings, we show analytically that a uniformly charged disc has a lower Coulomb energy than a sphere of the same volume. Further, we test the robustness of our results by including the effects of charge renormalization in the analysis of the shape transitions and find the latter to be feasible for a wide range of shell volume fractions.

  17. Off-shell currents and color–kinematics duality

    Directory of Open Access Journals (Sweden)

    Pierpaolo Mastrolia

    2016-02-01

    Full Text Available We elaborate on the color–kinematics duality for off-shell diagrams in gauge theories coupled to matter, by investigating the scattering process gg→ss,qq¯,gg, and show that the Jacobi relations for the kinematic numerators of off-shell diagrams, built with Feynman rules in axial gauge, reduce to a color–kinematics violating term due to the contributions of sub-graphs only. Such anomaly vanishes when the four particles connected by the Jacobi relation are on their mass shell with vanishing squared momenta, being either external or cut particles, where the validity of the color–kinematics duality is recovered. We discuss the role of the off-shell decomposition in the direct construction of higher-multiplicity numerators satisfying color–kinematics identity in four as well as in d dimensions, for the latter employing the Four Dimensional Formalism variant of the Four Dimensional Helicity scheme. We provide explicit examples for the QCD process gg→qq¯g.

  18. Stellar Populations of Shell Galaxies

    CERN Document Server

    Carlsten, S; Zenteno, A

    2016-01-01

    We present a study of the inner (out to $\\sim$1 R$_{\\mathrm{eff}}$) stellar populations of 9 shell galaxies. We derive stellar population parameters from long slit spectra by both analyzing the Lick indices of the galaxies and by fitting Single Stellar Population model spectra to the full galaxy spectra. The results from the two methods agree reasonably well. Many of the shell galaxies in our sample appear to have lower central $\\mathrm{Mg}_{2}$ index values than non-shell galaxies of the same central velocity dispersion, which is likely due to a past interaction event. Our shell galaxy sample shows a relation between central metallicity and velocity dispersion that is consistent with previous samples of non-shell galaxies. Analyzing the metallicity gradients in our sample, we find an average metallicity gradient of -0.16$\\pm$0.10 dex per decade in radius. We compare this with formation models to constrain the merging history of shell galaxies. We argue that our galaxies likely have undergone major mergers in...

  19. Anisotropic mechanical behavior of keratin tissue from quill shells of North American porcupine (Erethizon dorsatum)

    Energy Technology Data Exchange (ETDEWEB)

    Chou, S.F., E-mail: Shih-Feng.Chou@Dartmouth.edu [Thayer School of Engineering, Dartmouth College, Hanover NH. (United States); Overfelt, R.A. [Materials Engineering Program, 275 Wilmore Building, Auburn University, Auburn AL. (United States); Miller, M.E. [Department of Biological Sciences, 32 Life Sciences Building, Auburn University, Auburn AL. (United States)

    2012-11-15

    Porcupine quills are composed of keratin proteins fabricated during quill growth into a cylindrical outer shell with an interior foam core. In the present research, the tensile and nanomechanical properties of quill shells from North American porcupine (Erethizon dorsatum) were tested in the axial and circumferential directions at relative humidities of 65% and 100%. At 65% relative humidity, the mean axial elastic modulus and strength of the shell were found to be significantly greater than the corresponding circumferential elastic modulus and strength. Increasing the relative humidity to 100% decreased the measured moduli and strengths and increased the fracture strains due to the plasticizing effects of the absorbed water molecules. Fracture morphologies after tensile testing revealed a three layer structure for the quill shells. The elastic modulus and hardness of the inner quill shell layer were found to be larger than the middle and outer layers by nanoindentation testing. An extensive amount of fibrous cortical cell structure was found aligned parallel to the growth direction of the quill and accounted for the higher moduli, strength and hardness measurements in the axial direction compared to the circumferential direction. Transmission electron microscopy revealed a fine structure of 3-4 {mu}m diameter cortical spindle cells composed of 7 nm diameter intermediate filaments. The unfolding process of {alpha}-helices within the intermediate filaments was quantitatively measured by in-situ infrared spectroscopy technique.

  20. Isogeometric shell formulation based on a classical shell model

    KAUST Repository

    Niemi, Antti

    2012-09-04

    This paper constitutes the first steps in our work concerning isogeometric shell analysis. An isogeometric shell model of the Reissner-Mindlin type is introduced and a study of its accuracy in the classical pinched cylinder benchmark problem presented. In contrast to earlier works [1,2,3,4], the formulation is based on a shell model where the displacement, strain and stress fields are defined in terms of a curvilinear coordinate system arising from the NURBS description of the shell middle surface. The isogeometric shell formulation is implemented using the PetIGA and igakit software packages developed by the authors. The igakit package is a Python package used to generate NURBS representations of geometries that can be utilised by the PetIGA finite element framework. The latter utilises data structures and routines of the portable, extensible toolkit for scientific computation (PETSc), [5,6]. The current shell implementation is valid for static, linear problems only, but the software package is well suited for future extensions to geometrically and materially nonlinear regime as well as to dynamic problems. The accuracy of the approach in the pinched cylinder benchmark problem and present comparisons against the h-version of the finite element method with bilinear elements. Quadratic, cubic and quartic NURBS discretizations are compared against the isoparametric bilinear discretization introduced in [7]. The results show that the quadratic and cubic NURBS approximations exhibit notably slower convergence under uniform mesh refinement as the thickness decreases but the quartic approximation converges relatively quickly within the standard variational framework. The authors future work is concerned with building an isogeometric finite element method for modelling nonlinear structural response of thin-walled shells undergoing large rigid-body motions. The aim is to use the model in a aeroelastic framework for the simulation of flapping wings.

  1. Hard Trying and These Recipes

    Science.gov (United States)

    Atwell, Nancie

    2003-01-01

    Writers thrive when they are motivated to work hard, have regular opportunities to practice and reflect, and benefit from a knowledgeable teacher who knows writing. Student feedback to lessons during writing workshop helped guide Nancie Atwell in her quest to provide the richest and most efficient path to better writing.

  2. Kinetic theory of hard spheres

    NARCIS (Netherlands)

    Beijeren, H. van; Ernst, M.H.

    1979-01-01

    Kinetic equations for the hard-sphere system are derived by diagrammatic techniques. A linear equation is obtained for the one-particle-one particle equilibrium time correlation function and a nonlinear equation for the one-particle distribution function in nonequilibrium. Both equations are nonloca

  3. Metrics for Hard Goods Merchandising.

    Science.gov (United States)

    Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

    Designed to meet the job-related metric measurement needs of students interested in hard goods merchandising, this instructional package is one of five for the marketing and distribution cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational…

  4. Inclusive Hard Diffraction at HERA

    CERN Document Server

    Proskuryakov, Alexander

    2010-01-01

    Recent data from the H1 and ZEUS experiments on hard inclusive diffraction are discussed. Results of QCD analyses of the diffractive deep-inelastic scattering processes are reported. Predictions based on the extracted parton densities are compared to diffractive dijet measurements.

  5. Hard sphere model of atom

    CERN Document Server

    Tsekov, R

    2014-01-01

    The finite size effect of electron and nucleus is accounted for in the model of atom. Due to their hard sphere repulsion the energy of the 1s orbital decreases and the corrections amount up to 8 % in Uranium. Several models for boundary conditions on the atomic nucleus surface are discussed as well.

  6. Stress in hard metal films

    NARCIS (Netherlands)

    Janssen, G.C.A.M.; Kamminga, J.D.

    2004-01-01

    In the absence of thermal stress, tensile stress in hard metal films is caused by grain boundary shrinkage and compressive stress is caused by ion peening. It is shown that the two contributions are additive. Moreover tensile stress generated at the grain boundaries does not relax by ion bombardment

  7. Unifying approach to hard diffraction

    CERN Document Server

    Navelet, H

    2001-01-01

    We find a formulation of hard diffraction unifying the partonic (Ingelman-Schlein) Pomeron, Soft Colour Interaction and QCD dipole descriptions. A theoretical interpretation in terms of S-Matrix and perturbative QCD properties in the small x_{Bj} regime is proposed.

  8. Verrucous Carcinoma of Hard Plate

    OpenAIRE

    Parmod Kalstra,Monica Manhas,Rajdeep Sood

    2000-01-01

    VerrucouS squamous cell carcinoma occurs mainly in oral cavity and larynx, buccal mucosa being most commonly involved. One case of verrucous carcinoma involvmg left hard palate (T4 No Mo)in an adult male is being reported who underwent left total maxillectomy. The tumor behaviour andlts management has been dlscussed.

  9. AM03-AM121-115 Hard X-Ray Optics Development at MSFC

    Science.gov (United States)

    Ramsey, Brian; Elsner, Ron; Engelhaupt, Darell; Gubarev, Mikhail; Kolodziejczak, Jeffery; Martin, Greg; ODell, Steve; Speegle, Chet; Weiskopf, Martin

    2003-01-01

    We have developed the electroformed-nickel replication process to enable us to fabricate light-weight hard-x-ray region. Two projects currently utilizing this technology are the production of over 250 r from 5 to 10 cm, for our HERO balloon payload, and 15- and 23-cm-diameter shells for a prototype module. The challenge for the former is to fabricate, mount, align and fly a large number of high-r constraints of a modest budget. For the latter, the challenge is to maintain high angular resolution shell thicknesses (100 micron) which make the shells extremely sensitive to electroforming stresses process does not degrade the ultra-smooth surface finish (approx. 3 A required for eventual multilayer c on these two programs.

  10. Measurement of K Shell Photoelectric Cross Sections at a K Edge--A Laboratory Experiment

    Science.gov (United States)

    Nayak, S. V.; Badiger, N. M.

    2007-01-01

    We describe in this paper a new method for measuring the K shell photoelectric cross sections of high-Z elemental targets at a K absorption edge. In this method the external bremsstrahlung (EB) photons produced in the Ni target foil by beta particles from a weak[superscript 90]Sr-[superscript 90]Y beta source are passed through an elemental target…

  11. A New Method for Fixing Biomphalaria glabrata for Histologic Studies, Using Shell Perforation

    Directory of Open Access Journals (Sweden)

    Barbosa Luciene

    2002-01-01

    Full Text Available A new technique for fixation of Biomphalaria glabrata for histologic studies is described. It consists in performing several external holes in the shell, before placing the entire snail into the fixative. It is a very practical and quick procedure that showed excellent results when compared to the usual techniques.

  12. Hard processes in hadronic interactions

    Energy Technology Data Exchange (ETDEWEB)

    Satz, H. [CERN, Geneva (Switzerland)]|[Universitat Bielefeld (Germany); Wang, X.N. [Lawrence Berkeley Lab., CA (United States)

    1995-07-01

    Quantum chromodynamics is today accepted as the fundamental theory of strong interactions, even though most hadronic collisions lead to final states for which quantitative QCD predictions are still lacking. It therefore seems worthwhile to take stock of where we stand today and to what extent the presently available data on hard processes in hadronic collisions can be accounted for in terms of QCD. This is one reason for this work. The second reason - and in fact its original trigger - is the search for the quark-gluon plasma in high energy nuclear collisions. The hard processes to be considered here are the production of prompt photons, Drell-Yan dileptons, open charm, quarkonium states, and hard jets. For each of these, we discuss the present theoretical understanding, compare the resulting predictions to available data, and then show what behaviour it leads to at RHIC and LHC energies. All of these processes have the structure mentioned above: they contain a hard partonic interaction, calculable perturbatively, but also the non-perturbative parton distribution within a hadron. These parton distributions, however, can be studied theoretically in terms of counting rule arguments, and they can be checked independently by measurements of the parton structure functions in deep inelastic lepton-hadron scattering. The present volume is the work of Hard Probe Collaboration, a group of theorists who are interested in the problem and were willing to dedicate a considerable amount of their time and work on it. The necessary preparation, planning and coordination of the project were carried out in two workshops of two weeks` duration each, in February 1994 at CERn in Geneva andin July 1994 at LBL in Berkeley.

  13. External Measures of Cognition

    Directory of Open Access Journals (Sweden)

    Osvaldo eCairo

    2011-10-01

    Full Text Available The human brain is undoubtedly the most impressive, complex and intricate organ that has evolved over time. It is also probably the least understood, and for that reason, the one that is currently attracting the most attention. In fact, the number of comparative analyses that focus on the evolution of brain size in Homo sapiens and other species has increased dramatically in recent years. In neuroscience, no other issue has generated so much interest and been the topic of so many heated debates as the difference in brain size between socially defined population groups, both its connotations and implications. For over a century, external measures of cognition have been related to intelligence. However, it is still unclear whether these measures actually correspond to cognitive abilities. In summary, this paper must be reviewed with this premise in mind.

  14. WALNUT: NOT A HARD NUT TO CRACK

    Directory of Open Access Journals (Sweden)

    Khanna Deepa

    2011-05-01

    Full Text Available Walnuts grow on large trees, known for their beauty, timber and tasty edible nuts. There are many varieties of walnuts that vary in hardiness, nut size and thickness of the nut shell. When it comes to their health benefits, Walnuts definitely are not hard nuts to crack. They contain free radical scavenging compounds like ellagic acid, juglone and certain phytosterols that support the immune system and appear to have anti-cancer properties. Walnuts have higher contents of polyunsaturated fatty acids including α-Linolenic acid, than do other nuts which may give walnuts additional anti-atherogenic and cosmetic value. It was found in clinical trials that walnut consumption in the amount of two to three servings per day consistently decreased total cholesterol and LDL cholesterol. Linolenic acid and Linoleic acids present abundantly in walnuts are crucial for maintaining skin functions such as regulation of transepidermal water loss and anti- inflammatory action. The beneficial action of walnut oil on skin is known for centuries and is widely used in cosmetic industry. The walnut oil is a component of dry skin creams, anti-wrinkle and anti-ageing products as it possesses moisturizing property as well as free radical scavenging capacity. Besides, they also exhibit anti-microbial, anti-diabetic, anti-stress, anti-ageing and Hepatoprotective activities. “Walnuts are better than cookies, french fries or potato chips, when you need a snack” as they provide rich nutrients. In the light of above, we thought it worthwhile to compile an up-to-date review article on Walnuts covering its synonyms, phytoconstituents, phytopharmacology and medicinal uses.

  15. Transverse shear effect in a circumferentially cracked cylindrical shell

    Science.gov (United States)

    Delale, F.; Erdogan, F.

    1979-01-01

    The objectives of the paper are to solve the problem of a circumferentially-cracked cylindrical shell by taking into account the effect of transverse shear, and to obtain the stress intensity factors for the bending moment as well as the membrane force as the external load. The formulation of the problem is given for a specially orthotropic material within the framework of a linearized shallow shell theory. The particular theory used permits the consideration of all five boundary conditions as to moment and stress resultants on the crack surface. The effect of Poisson's ratio on the stress intensity factors and the nature of the out-of-plane displacement along the edges of the crack, i.e., bulging, are also studied.

  16. Synthesis of core-shell composites using an inverse surfmer.

    Science.gov (United States)

    Armando Zaragoza-Contreras, E; Stockton-Leal, Margarita; Hernández-Escobar, Claudia A; Hoshina, Yusuke; Guzmán-Lozano, Josué F; Kobayashi, Takaomi

    2012-07-01

    Anilinium dodecylsulfate was prepared from aniline and sodium dodecylsulfate. The critical micellar concentration of the salt was determined using electrical conductimetry, which revealed that the change of countercation, sodium by anilinium, reduced the critical micellar concentration with respect to the conventional counterpart, sodium dodecylsulfate. The anilinium dodecylsulfate was used as the surfmer in the synthesis of polystyrene/polyaniline core-shell composites, first performing as the surfactant to stabilize the emulsion polymerization of styrene, and later as the monomer to synthesize polyaniline via oxidative polymerization. Here, the surfmer function was directed toward the external phase instead of to the internal phase, as with conventional surfmers with carbon-carbon double bonds. Consequently, the term inverse surfmer is proposed. Analyses of its composite microstructure using electron microscopy and thermogravimetric analysis confirmed the core-shell arrangement.

  17. A wind-shell interaction model for multipolar planetary nebulae

    CERN Document Server

    Steffen, W; Esquivel, A; Garcia-Segura, G; Garcia-Diaz, Ma T; Lopez, J A; Magnor, M

    2013-01-01

    We explore the formation of multipolar structures in planetary and pre-planetary nebulae from the interaction of a fast post-AGB wind with a highly inhomogeneous and filamentary shell structure assumed to form during the final phase of the high density wind. The simulations were performed with a new hydrodynamics code integrated in the interactive framework of the astrophysical modeling package SHAPE. In contrast to conventional astrophysical hydrodynamics software, the new code does not require any programming intervention by the user for setting up or controlling the code. Visualization and analysis of the simulation data has been done in SHAPE without external software. The key conclusion from the simulations is that secondary lobes in planetary nebulae, such as Hubble 5 and K3-17, can be formed through the interaction of a fast low-density wind with a complex high density environment, such as a filamentary circumstellar shell. The more complicated alternative explanation of intermittent collimated outflow...

  18. Electronic shell and supershell structure in graphene flakes

    CERN Document Server

    Manninen, M; Akola, J

    2008-01-01

    We use a simple tight-binding (TB) model to study electronic properties of free graphene flakes. Valence electrons of triangular graphene flakes show a shell and supershell structure which follows an analytical expression derived from the solution of the wave equation for triangular cavity. However, the solution has different selection rules for triangles with armchair and zigzag edges, and roughly 40000 atoms are needed to see clearly the first supershell oscillation. In the case of spherical flakes, the edge states of the zigzag regions dominate the shell structure which is thus sensitive to the flake diameter and center. A potential well that is made with external gates cannot have true bound states in graphene due to the zero energy band gap. However, it can cause strong resonances in the conduction band.

  19. Sea shell diversity and rapidly evolving secretomes: insights into the evolution of biomineralization.

    Science.gov (United States)

    Kocot, Kevin M; Aguilera, Felipe; McDougall, Carmel; Jackson, Daniel J; Degnan, Bernard M

    2016-01-01

    An external skeleton is an essential part of the body plan of many animals and is thought to be one of the key factors that enabled the great expansion in animal diversity and disparity during the Cambrian explosion. Molluscs are considered ideal to study the evolution of biomineralization because of their diversity of highly complex, robust and patterned shells. The molluscan shell forms externally at the interface of animal and environment, and involves controlled deposition of calcium carbonate within a framework of macromolecules that are secreted from the dorsal mantle epithelium. Despite its deep conservation within Mollusca, the mantle is capable of producing an incredible diversity of shell patterns, and macro- and micro-architectures. Here we review recent developments within the field of molluscan biomineralization, focusing on the genes expressed in the mantle that encode secreted proteins. The so-called mantle secretome appears to regulate shell deposition and patterning and in some cases becomes part of the shell matrix. Recent transcriptomic and proteomic studies have revealed marked differences in the mantle secretomes of even closely-related molluscs; these typically exceed expected differences based on characteristics of the external shell. All mantle secretomes surveyed to date include novel genes encoding lineage-restricted proteins and unique combinations of co-opted ancient genes. A surprisingly large proportion of both ancient and novel secreted proteins containing simple repetitive motifs or domains that are often modular in construction. These repetitive low complexity domains (RLCDs) appear to further promote the evolvability of the mantle secretome, resulting in domain shuffling, expansion and loss. RLCD families further evolve via slippage and other mechanisms associated with repetitive sequences. As analogous types of secreted proteins are expressed in biomineralizing tissues in other animals, insights into the evolution of the genes

  20. ASYMPTOTIC ANALYSIS OF DYNAMIC PROBLEMS FOR LINEARLY ELASTIC SHELLS JUSTIFICATION OF EQUATIONS FOR DYNAMIC KOITER SHELLS

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Under certain conditions, the dynamic equatioins of membrane shells and the dynamic equations of flexural shells are obtained from dynamic equations of Koiter shells by the method of asymptotic analysis.

  1. External conference: Geneva University

    CERN Multimedia

    2006-01-01

    Ecole de physique Département de physique nucléaire et corspusculaire 24, Quai Ernest-Ansermet 1211 GENEVE 4 Tél: (022) 379 62 73 Fax: (022) 379 69 92 Wednesday 13 December 2006 PARTICLE PHYSICS SEMINAR at 17.00 hrs - Stückelberg Auditorium Radiation Tolerant Sensors for Solid State Tracking Detectors by Dr Michael MOLL / CERN The envisaged upgrade of the Large Hadron Collider (LHC) at CERN towards the Super-LHC (SLHC) with a 10 times increased luminosity of 1035 cm2 s-1 will present severe challenges for the tracking detectors of the SLHC experiments. Unprecedented high radiation levels and track densities and a reduced bunch crossing time in the order of 10 ns as well as the need for cost effective detectors have called for an intensive R&D program. The CERN RD50 collaboration 'Development of Radiation Hard Semiconductor Devices for Very High Luminosity Colliders' is working on the development of semiconductor sensors matching the requirements of the SLHC. Sensors based on defect engineered silic...

  2. Electronic Properties of Strained Si/Ge Core-Shell Nanowires

    CERN Document Server

    Peng, Xihong

    2010-01-01

    We investigated the electronic properties of strained Si/Ge core-shell nanowires along the [110] direction using first principles calculations based on density-functional theory. The diameter of the studied core-shell wire is up to 5 nm. We found the band gap of the core-shell wire is smaller than that of both pure Si and Ge wires with the same diameter. This reduced band gap is ascribed to the intrinsic strain between Ge and Si layers, which partially counters the quantum confinement effect. The external strain is further applied to the nanowires for tuning the band structure and band gap. By applying sufficient tensile strain, we found the band gap of Si-core/Ge-shell nanowire with diameter larger than ~3 nm experiences a transition from direct to indirect gap.

  3. Ecomorphological Analyses of Marine Mollusks' Shell Thickness of Rapana venosa (VALENCIENNES, 1846 (Gastropoda: Muricidae

    Directory of Open Access Journals (Sweden)

    Igor P. Bondarev

    2013-10-01

    Full Text Available Shell thickness of Rapana venosa was investigated from ecologically different places of the Azov – Black Sea basin. In the formation of the shell thickness there are two major trends: thickening with age, and inversely proportional to the size of the thickening of even-aged individuals of the same population. Shell thickness formation was analyzed in connection with biotic and abiotic environmental factors of influence. R. venosa ontogeny is not conducive to the rapid succession newly acquired characters in local populations. The formation of a thick shell is mainly the individual response of bions to the environment. Individuals’ of the same type reaction is the cause of formation of specific conchological characters of separate populations or parts thereof. Mechanical impacts (e.g. damage by breaking predators and storm waves hitting on rocks have no significant effect on the increasing of thickness of shells. Comparative analysis of the thickness of the shell of R. venosa from areas with different salinity shows that the direct relationship between these parameters is absent. R. venosa is capable of forming its own salinity medium in the mantle cavity, which is different from the external environment. The main factor influencing the formation of a thick-walled shell is the amplitude of the temperature fluctuations in the locality. Shell thickness of R. venosa was considered as ecomorphological character in comparison with the same feature of shell-bearing mollusks from the World Ocean at different latitude zones. It is shown that high temperature gradient is one of the most important factors of forming a thick shell. The greatest show this intertidal species and ecomorphs of temperate and high latitudes, where the temperature gradients are most expressed.

  4. Black hole entropy off-shell vs on-shell

    CERN Document Server

    Frolov, V P; Zelnikov, A I

    1996-01-01

    Different methods of calculation of quantum corrections to the thermodynamical characteristics of a black hole are discussed and compared. The relation between on-shell and off-shell approaches is established. The off-shell methods are used to explicitly demonstrate that the thermodynamical entropy S^{TD} of a black hole, defined by the first thermodynamical law, differs from the statistical-mechanical entropy S^{SM}, determined as S^{SM}=-\\mbox{Tr}(\\hat{\\rho}^H\\ln\\hat{\\rho}^H) for the density matrix \\hat{\\rho}^H of a black hole. It is shown that the observable thermodynamical black hole entropy can be presented in the form S^{TD}=\\pi {\\bar r}_+^2+S^{SM}-S^{SM}_{Rindler}. Here {\\bar r}_+ is the radius of the horizon shifted because of the quantum backreaction effect, and S^{SM}_{Rindler} is the statistical-mechanical entropy calculated in the Rindler space.

  5. Studies on Thin-shells and Thin-shell Wormholes

    CERN Document Server

    Övgün, Ali

    2016-01-01

    The study of traversable wormholes is very hot topic for the past 30 years. One of the best possible way to make traversable wormhole is using the thin-shells to cut and paste two spacetime which has tunnel from one region of space-time to another, through which a traveler might freely pass in wormhole throat. These geometries need an exotic matter which involves a stress-energy tensor that violates the null energy condition. However, this method can be used to minimize the amount of the exotic matter. The goal of this thesis study is to study on thin-shell and thin-shell wormholes in general relativity in 2+1 and 3+1 dimensions. We also investigate the stability of such objects.

  6. Dynamic behaviour of a coaxial cylindrical shells, with a gap partially filled with fluid

    Directory of Open Access Journals (Sweden)

    Baghdasaryan G.Ye.

    2011-09-01

    Full Text Available There are numerous studies on the vibrations and dynamic stability of a cylindrical shell filled with fluid. Information about these studies can be found in monographs [1-4] and in a review article [5]. The problem of vibrations of coaxial cylindrical shells, filled with fluid of variable-depth, is considered in [6]. The problem of stability of cylindrical shells partially filled with fluid, with an external dynamic pressure is discussed in [7]. The problems of vibration of coaxial cylindrical shells are considered in [8-11], and besides [8, 11], in the remaining papers which deal with the same case, the vibrations of shells completely filled with fluid are researched in [9, 10]. The question of possible loss of stability is considered in [11]. In this paper, the problem of vibrations and stability of isotropic coaxial circular cylindrical shells of finite length in linear statement is considered, when the region between the shells (the gap is partially filled with an incompressible fluid . The dependence of the vibration frequency on the depth of the filling and the thickness of the gap of the considered hydro-elastic system is studied. The possibility of loss of static stability of hydro-elastic system under the influence of hydrostatic pressure is shown.

  7. Nonlinear stability of cylindrical shells subjected to axial flow: Theory and experiments

    Science.gov (United States)

    Karagiozis, K. N.; Païdoussis, M. P.; Amabili, M.; Misra, A. K.

    2008-01-01

    This paper, is concerned with the nonlinear dynamics and stability of thin circular cylindrical shells clamped at both ends and subjected to axial fluid flow. In particular, it describes the development of a nonlinear theoretical model and presents theoretical results displaying the nonlinear behaviour of the clamped shell subjected to flowing fluid. The theoretical model employs the Donnell nonlinear shallow shell equations to describe the geometrically nonlinear structure. The clamped beam eigenfunctions are used to describe the axial variations of the shell deformation, automatically satisfying the boundary conditions and the circumferential continuity condition exactly. The fluid is assumed to be incompressible and inviscid, and the fluid-structure interaction is described by linear potential flow theory. The partial differential equation of motion is discretized using the Galerkin method and the final set of ordinary differential equations are integrated numerically using a pseudo-arclength continuation and collocation techniques and the Gear backward differentiation formula. A theoretical model for shells with simply supported ends is presented as well. Experiments are also described for (i) elastomer shells subjected to annular (external) air-flow and (ii) aluminium and plastic shells with internal water flow. The experimental results along with the theoretical ones indicate loss of stability by divergence with a subcritical nonlinear behaviour. Finally, theory and experiments are compared, showing good qualitative and reasonable quantitative agreement.

  8. The interplay of sedimentation and crystallization in hard-sphere suspensions

    NARCIS (Netherlands)

    Russo, J.; Maggs, A.C.; Bonn, D.; Tanaka, H.

    2013-01-01

    We study crystal nucleation under the influence of sedimentation in a model of colloidal hard spheres via Brownian dynamics simulations. We introduce two external fields acting on the colloidal fluid: a uniform gravitational field (body force), and a surface field imposed by pinning a layer of equil

  9. Onsager theory of length-bidisperse hard rods: Evidence for a nematic-nematic critical point

    OpenAIRE

    2002-01-01

    This manuscript has been withdrawn because of significant overlap with an existing paper (Szabolcs Varga and Istvan Szalai, "Phase diagrams of binary mixtures of hard rods in an external orientational field", Phys. Chem. Chem. Phys., 2:1955-1959, 2000) of which we were, unfortunately, unaware when submitting our manuscript.

  10. Shell-model calculations for p-shell hypernuclei

    OpenAIRE

    Millener, D. J.

    2012-01-01

    The interpretation of hypernuclear gamma-ray data for p-shell hypernuclei in terms of shell-model calculations that include the coupling of Lambda- and Sigma-hypernuclear states is briefly reviewed. Next, Lambda 8Li, Lambda 8Be, and Lambda 9Li are considered, both to exhibit features of Lambda-Sigma coupling and as possible source of observed, but unassigned, hypernuclear gamma rays. Then, the feasibility of measuring the ground-state doublet spacing of Lambda 10Be, which, like Lambda 9Li, co...

  11. Molecular hardness and softness, local hardness and softness, hardness and softness kernels, and relations among these quantities

    Science.gov (United States)

    Berkowitz, Max; Parr, Robert G.

    1988-02-01

    Hardness and softness kernels η(r,r') and s(r,r') are defined for the ground state of an atomic or molecular electronic system, and the previously defined local hardness and softness η(r) and s(r) and global hardness and softness η and S are obtained from them. The physical meaning of s(r), as a charge capacitance, is discussed (following Huheey and Politzer), and two alternative ``hardness'' indices are identified and briefly discussed.

  12. Ultrasonic material hardness depth measurement

    Science.gov (United States)

    Good, Morris S.; Schuster, George J.; Skorpik, James R.

    1997-01-01

    The invention is an ultrasonic surface hardness depth measurement apparatus and method permitting rapid determination of hardness depth of shafts, rods, tubes and other cylindrical parts. The apparatus of the invention has a part handler, sensor, ultrasonic electronics component, computer, computer instruction sets, and may include a display screen. The part handler has a vessel filled with a couplant, and a part rotator for rotating a cylindrical metal part with respect to the sensor. The part handler further has a surface follower upon which the sensor is mounted, thereby maintaining a constant distance between the sensor and the exterior surface of the cylindrical metal part. The sensor is mounted so that a front surface of the sensor is within the vessel with couplant between the front surface of the sensor and the part.

  13. Development of Radiation Hard Scintillators

    CERN Document Server

    Tiras, Emrah; Bilki, Burak; Winn, David; Onel, Yasar

    2016-01-01

    Modern high-energy physics experiments are in ever increasing need for radiation hard scintillators and detectors. In this regard, we have studied various radiation-hard scintillating materials such as Polyethylene Naphthalate (PEN), Polyethylene Terephthalate (PET), our prototype material Scintillator X (SX) and Eljen (EJ). Scintillation and transmission properties of these scintillators are studied using stimulated emission from a 334 nm wavelength UV laser with PMT before and after certain amount of radiation exposure. Recovery from radiation damage is studied over time. While the primary goal of this study is geared for LHC detector upgrades, these new technologies could easily be used for future experiments such as the FCC and ILC. Here we discuss the physics motivation, recent developments and laboratory measurements of these materials.

  14. Synthesis and characterization of model silica-gold core-shell nanohybrid systems to demonstrate plasmonic enhancement of fluorescence

    Science.gov (United States)

    Roy, Shibsekhar; Dixit, Chandra K.; Woolley, Robert; O'Kennedy, Richard; McDonagh, Colette

    2012-08-01

    In this work, gold-silica plasmonic nanohybrids have been synthesized as model systems which enable tuning of dye fluorescence enhancement/quenching interactions. For each system, a dye-doped silica core is surrounded by a 15 nm spacer region, which in turn is surrounded by gold nanoparticles (GNPs). The GNPs are either covalently conjugated via mercapto silanization to the spacer or encapsulated in a separate external silica shell. The intermediate spacer region can be either dye doped or left undoped to enable quenching and plasmonic enhancement effects respectively. The study indicates that there is a larger enhancement effect when GNPs are encapsulated in the outer shell compared to the system of external conjugation. This is due to the environmental shielding provided by shell encapsulation compared to the exposure of the GNPs to the solvent environment for the externally conjugated system. The fluorescence signal enhancement of the nanohybrid systems was evaluated using a standard HRP-anti-HRP fluorescence based assay platform.

  15. Effect of external electric field on Cyclodextrin-Alcohol adducts: A DFT study

    Indian Academy of Sciences (India)

    Kundan Baruah; Pradip Kr Bhattacharyya

    2015-06-01

    Effect of external electric fields on the interaction energy between cyclodextrin and alcohol was analyzed in the light of density functional theory (DFT) and density functional reactivity theory (DFRT). Stability of the cyclodextrin-alcohol adducts was measured in terms of DFT based reactivity descriptor, global hardness, electrophilicity, and energy of the HOMO. Stability of adducts was observed to be sensitive towards the strength as well as direction of the applied external electric field. In addition, reactivity pattern follows the maximum hardness and minimum electrophilicity principles.

  16. Schwannoma of the hard palate

    OpenAIRE

    2009-01-01

    Schwannomas are benign encapsulated perineural tumors. The head and neck region is the most common site. Intraoral origin is seen in only 1% of cases, tongue being the most common site; its location in the palate is rare. We report a case of hard-palate schwannoma with bony erosion which was immunohistochemically confirmed. The tumor was excised completely intraorally. After two months of follow-up, the defect was found to be completely covered with palatal mucosa.

  17. Playing Moderately Hard to Get

    Directory of Open Access Journals (Sweden)

    Stephen Reysen

    2013-12-01

    Full Text Available In two studies, we examined the effect of different degrees of attraction reciprocation on ratings of attraction toward a potential romantic partner. Undergraduate college student participants imagined a potential romantic partner who reciprocated a low (reciprocating attraction one day a week, moderate (reciprocating attraction three days a week, high (reciprocating attraction five days a week, or unspecified degree of attraction (no mention of reciprocation. Participants then rated their degree of attraction toward the potential partner. The results of Study 1 provided only partial support for Brehm’s emotion intensity theory. However, after revising the high reciprocation condition vignette in Study 2, supporting Brehm’s emotion intensity theory, results show that a potential partners’ display of reciprocation of attraction acted as a deterrent to participants’ intensity of experienced attraction to the potential partner. The results support the notion that playing moderately hard to get elicits more intense feelings of attraction from potential suitors than playing too easy or too hard to get. Discussion of previous research examining playing hard to get is also re-examined through an emotion intensity theory theoretical lens.

  18. Windows PowerShell 20 Bible

    CERN Document Server

    Lee, Thomas; Schill, Mark E; Tanasovski, Tome

    2011-01-01

    Here's the complete guide to Windows PowerShell 2.0 for administrators and developers Windows PowerShell is Microsoft's next-generation scripting and automation language. This comprehensive volume provides the background that IT administrators and developers need in order to start using PowerShell automation in exciting new ways. It explains what PowerShell is, how to use the language, and specific ways to apply PowerShell in various technologies. Windows PowerShell is Microsoft's standard automation tool and something that every Windows administrator will eventually have to understand; this b

  19. External fixators in haemophilia.

    Science.gov (United States)

    Lee, V; Srivastava, A; PalaniKumar, C; Daniel, A J; Mathews, V; Babu, N; Chandy, M; Sundararaj, G D

    2004-01-01

    External fixators (EF) are not commonly used for patients with haemophilia. We describe the use of EF (Ilizarov, AO- uni- and bi-planar fixators and Charnley clamp) in nine patients (mean age: 19.2 years; range: 9-37) with haemophilia for the following indications - arthrodesis of infected joints, treatment of open fractures and osteoclasis. EF required an average of nine skin punctures [range: 4-17 were maintained for a period of 15 weeks (range: 8-29.5), without regular factor replacement, till bone healing was adequate and were removed with a single dose of factor infusion]. The mean preoperative factor level achieved was 85% (range: 64-102%). Much lower levels were subsequently maintained till wound healing. The average total factor consumption was 430 IU kg(-1) (range: 240-870), administered over a period of 17 days (range: 9-44). There were no major complications related to EF except in a patient who developed inhibitors. In conclusion, EF can be used safely in haemophilic patients who do not have inhibitors and does not require prolonged factor replacement.

  20. The effect of angle and moment of the hip and knee joint on iliotibial band hardness.

    Science.gov (United States)

    Tateuchi, Hiroshige; Shiratori, Sakiko; Ichihashi, Noriaki

    2015-02-01

    Although several studies have described kinematic deviations such as excessive hip adduction in patients with iliotibial band (ITB) syndrome, the factors contributing to increased ITB hardness remains undetermined, owing to lack of direct in vivo measurement. The purpose of this study was to clarify the factors contributing to an increase in ITB hardness by comparing the ITB hardness between the conditions in which the angle, moment, and muscle activity of the hip and knee joint are changed. Sixteen healthy individuals performed the one-leg standing under five conditions in which the pelvic and trunk inclination were changed in the frontal plane. The shear elastic modulus in the ITB was measured as an indicator of the ITB hardness using shear wave elastography. The three-dimensional joint angle and external joint moment in the hip and knee joints, and muscle activities of the gluteus maximus, gluteus medius, tensor fasciae latae, and vastus lateralis, which anatomically connect to the ITB, were also measured. ITB hardness was significantly increased in the posture with pelvic and trunk inclination toward the contralateral side of the standing leg compared with that in all other conditions (increase of approximately 32% compared with that during normal one-leg standing). This posture increased both the hip adduction angle and external adduction moment at the hip and knee joint, although muscle activities were not increased. Our findings suggest that coexistence of an increased adduction moment at the hip and knee joints with an excessive hip adduction angle lead to an increase in ITB hardness.

  1. Shell Models of Magnetohydrodynamic Turbulence

    CERN Document Server

    Plunian, Franck; Frick, Peter

    2012-01-01

    Shell models of hydrodynamic turbulence originated in the seventies. Their main aim was to describe the statistics of homogeneous and isotropic turbulence in spectral space, using a simple set of ordinary differential equations. In the eighties, shell models of magnetohydrodynamic (MHD) turbulence emerged based on the same principles as their hydrodynamic counter-part but also incorporating interactions between magnetic and velocity fields. In recent years, significant improvements have been made such as the inclusion of non-local interactions and appropriate definitions for helicities. Though shell models cannot account for the spatial complexity of MHD turbulence, their dynamics are not over simplified and do reflect those of real MHD turbulence including intermittency or chaotic reversals of large-scale modes. Furthermore, these models use realistic values for dimensionless parameters (high kinetic and magnetic Reynolds numbers, low or high magnetic Prandtl number) allowing extended inertial range and accu...

  2. AI-Based Diagnostic Shell

    Directory of Open Access Journals (Sweden)

    R. L. Verma

    1989-01-01

    Full Text Available This paper datails the design and implementation of an AI-based diagnostic shell. The shell has a user-interface which takes in the complaint and aids the user throughout the consultation. The 'expert knowledge' is acquired and encoded in the form of 'IF-THEN' rules, The control mechanism routes through the rules chaining first backwards to identify a fault and then forwards to confirm it.Explanation facilities have been provided to enable the user query the reason for any question asked, a facility to go back and re-answer any previous question, and a trace and explanation of the path of reasoning.This shell was developed and first used for the diagnosis of a digital exchange. It was then applied for the fault-finding of the moving target indicator used in the radar.

  3. Asymptotic safety goes on shell

    Science.gov (United States)

    Benedetti, Dario

    2012-01-01

    It is well known in quantum field theory that the off-shell effective action depends on the gauge choice and field parametrization used in calculating it. Nevertheless, the typical scheme in which the scenario of asymptotically safe gravity is investigated is an off-shell version of the functional renormalization group equation. Working with the Einstein-Hilbert truncation as a test bed, we develop a new scheme for the analysis of asymptotically safe gravity in which the on-shell part of the effective action is singled out and we show that the beta function for the essential coupling has no explicit gauge dependence. In order to reach our goal, we introduce several technical novelties, including a different decomposition of the metric fluctuations, a new implementation of the ghost sector and a new cut-off scheme. We find a nontrivial fixed point, with a value of the cosmological constant that is independent of the gauge-fixing parameters.

  4. Why Are Drugs So Hard to Quit?

    Medline Plus

    Full Text Available ... Quitting drugs is hard because addiction is a brain disease. Your brain is like a control tower that sends out ... and choices. Addiction changes the signals in your brain and makes it hard to feel OK without ...

  5. Why Are Drugs So Hard to Quit?

    Medline Plus

    Full Text Available ... Quitting drugs is hard because addiction is a brain disease. Your brain is like a control tower that sends out ... and choices. Addiction changes the signals in your brain and makes it hard to feel OK without ...

  6. Prevalence of anisotropic shell growth in rare earth core-shell upconversion nanocrystals.

    Science.gov (United States)

    Zhang, Chao; Lee, Jim Yang

    2013-05-28

    Through a series of carefully executed experiments, we discovered the prevalence of anisotropic shell growth in many upconversion NaREF4 systems caused by a combination of factors: selective adsorption of ligands on the core surface due to the core crystal structure, ligand etching, and the lattice mismatch between core and shell components. This could lead to incomplete shell formation in core-shell nanocrystals under certain conditions. Shell growth is always faster in the a and b crystallographic directions than in the c direction. In the case of a larger lattice mismatch between the core and shell, shell growth only occurs in the a and b directions resulting in an oblong core-shell structure. These findings are useful for rationalizing shell-dependent emission properties, understanding the emission mechanisms in complex core-shell nanostructures, and for creating accurate models of core-shell designs for multifunctionality and optimal performance in applications.

  7. Skepticism, contextualism, externalism and modality

    National Research Council Canada - National Science Library

    Ron Wilburn

    2006-01-01

    .... However, because efforts to contextualize externalism via subjunctive conditional analysis court circularity, it is only on an internalistic interpretation that contextualist strategies can even be motivated...

  8. Stability of facetted translation shells

    DEFF Research Database (Denmark)

    Almegaard, Henrik; Vanggaard, Ole

    2004-01-01

    This article is discussing the spatial stability i.e. rigidity of double curved shell surfaces under different support conditions. It is based upon a method developed by Henrik Almegaard, as part of the theory concerning the stringer system (ALM04a).......This article is discussing the spatial stability i.e. rigidity of double curved shell surfaces under different support conditions. It is based upon a method developed by Henrik Almegaard, as part of the theory concerning the stringer system (ALM04a)....

  9. Learning Shell scripting with Zsh

    CERN Document Server

    Festari, Gaston

    2014-01-01

    A step-by-step tutorial that will teach you, through real-world examples, how to configure and use Zsh and its various features. If you are a system administrator, developer, or computer professional involved with UNIX who are looking to improve on their daily tasks involving the UNIX shell, ""Learning Shell Scripting with Zsh"" will be great for you. It's assumed that you have some familiarity with an UNIX command-line interface and feel comfortable with editors such as Emacs or vi.

  10. Alternative mechanisms of increased eggshell hardness of avian brood parasites relative to host species

    Science.gov (United States)

    Igic, Branislav; Braganza, Kim; Hyland, Margaret M.; Silyn-Roberts, Heather; Cassey, Phillip; Grim, Tomas; Rutila, Jarkko; Moskát, Csaba; Hauber, Mark E.

    2011-01-01

    Obligate brood parasitic birds lay their eggs in nests of other species and parasite eggs typically have evolved greater structural strength relative to host eggs. Increased mechanical strength of the parasite eggshell is an adaptation that can interfere with puncture ejection behaviours of discriminating hosts. We investigated whether hardness of eggshells is related to differences between physical and chemical traits from three different races of the parasitic common cuckoo Cuculus canorus, and their respective hosts. Using tools developed for materials science, we discovered a novel correlate of increased strength of parasite eggs: the common cuckoo's egg exhibits a greater microhardness, especially in the inner region of the shell matrix, relative to its host and sympatric non-host species. We then tested predictions of four potential mechanisms of shell strength: (i) increased relative thickness overall, (ii) greater proportion of the structurally harder shell layers, (iii) higher concentration of inorganic components in the shell matrix, and (iv) elevated deposition of a high density compound, MgCO3, in the shell matrix. We confirmed support only for hypothesis (i). Eggshell characteristics did not differ between parasite eggs sampled from different host nests in distant geographical sites, suggesting an evolutionarily shared microstructural mechanism of stronger parasite eggshells across diverse host-races of brood parasitic cuckoos. PMID:21561966

  11. Raman Model Predicting Hardness of Covalent Crystals

    OpenAIRE

    Zhou, Xiang-Feng; Qian, Quang-Rui; Sun, Jian; Tian, Yongjun; Wang, Hui-Tian

    2009-01-01

    Based on the fact that both hardness and vibrational Raman spectrum depend on the intrinsic property of chemical bonds, we propose a new theoretical model for predicting hardness of a covalent crystal. The quantitative relationship between hardness and vibrational Raman frequencies deduced from the typical zincblende covalent crystals is validated to be also applicable for the complex multicomponent crystals. This model enables us to nondestructively and indirectly characterize the hardness o...

  12. Tribological characterization of selected hard coatings

    OpenAIRE

    Karlsson, Patrik

    2009-01-01

    Hard coatings are often used for protection of tool surfaces due to coating properties like low friction and high wear resistance. Even though many of the hard coatings have been tested for wear, it is important to try new wear test setups to fully understand tribological mechanisms and the potential of hard coatings. Few experiments have been performed with dual-coated systems where the sliding contact surfaces are coated with the same, or different, hard coating. The dual-coated system coul...

  13. Design of a stabilizing shell for KTX

    Energy Technology Data Exchange (ETDEWEB)

    You, Wei [CAS Key Laboratory of Geospace Environment, Department of Modern Physics, University of Science and Technology of China, Hefei 230026 (China); Li, Hong, E-mail: honglee@ustc.edu.cn [CAS Key Laboratory of Geospace Environment, Department of Modern Physics, University of Science and Technology of China, Hefei 230026 (China); Tan, Mingsheng; Lu, Mingjian; Wu, Yanqi; Mao, Wenzhe; Bai, Wei; Tu, Cui; Luo, Bing; Li, Zichao; Adil, Yolbarsop; Hu, Jintong [CAS Key Laboratory of Geospace Environment, Department of Modern Physics, University of Science and Technology of China, Hefei 230026 (China); Song, Yuntao; Yang, Qingxi; Zhang, Ping [Institute of Plasma Physics Chinese Academy of Sciences, Hefei 230026 (China); Xie, Jinlin; Lan, Tao; Liu, Adi [CAS Key Laboratory of Geospace Environment, Department of Modern Physics, University of Science and Technology of China, Hefei 230026 (China); Ding, Weixing [CAS Key Laboratory of Geospace Environment, Department of Modern Physics, University of Science and Technology of China, Hefei 230026 (China); Department of Physics and Astronomy, University of California at Los Angeles, Los Angeles, CA 90095 (United States); Xiao, Chijin [CAS Key Laboratory of Geospace Environment, Department of Modern Physics, University of Science and Technology of China, Hefei 230026 (China); Department of Physics and Engineering Physics, University of Saskatchewan, SK S7 N 5N2 (Canada); and others

    2016-10-15

    The conductive shell in reversed field pinch devices plays an important role in controlling plasma and in suppressing MHD instabilities. The shell in the Keda torus experiment reversed field pinch (KTX-RFP) device includes a 6-mm stainless steel vacuum chamber and a 1.5-mm stabilizing copper shell. This stabilizing shell has both poloidal and toroidal gaps to allow a coupling of electromagnetic energy to the plasma. Nevertheless, any gaps in this shell generate error fields. A 3D electromagnetic field model has been used to study effects of the gap on the shell. Using off-center current filaments instead of the distributed plasma current density, numerical analyses render the induced current distribution on the stabilizing shell and the resultant error field distribution at a specific frequency. From the analyses and comparisons of different configurations for the stabilizing shell, a suitable shell design is chosen consisting of three sections: one primary shell, two poloidal shield shells, and two toroidal shield shells. Moreover, the time evolution of the magnetic field inside and outside the stabilizing shell was obtained for this design and the dependence of the magnetic field penetration time on mode number and location has been investigated.

  14. Coulomb explosion imaging of bromobenzene and bromophenol molecules following Br K-shell ionization

    Energy Technology Data Exchange (ETDEWEB)

    Iwayama, H; Nagaya, K; Murakami, H; Ohmasa, Y; Yao, M, E-mail: yao@scphys.kyoto-u.ac.j [Department of Physics, Kyoto University, Kyoto 606-8502 (Japan)

    2010-09-28

    We have performed multiple-ion coincidence momentum imaging measurements for bromobenzene and bromophenol molecules irradiated by hard x-ray photons at Br K-shell edge. Dominant fragment ions were singly charged monatomic ions H{sup +}, C{sup +}, O{sup +} and Br{sup +}. This indicates that parent molecules became highly charged through Auger cascade of Br core shell ionization. From an analysis of momentum vectors of ions, we found that the ejection directions of fragment ions strongly reflected the molecular structure of the neutral state. We can reproduce experimental results well by the trajectory analysis of fragment ions based on a Coulomb explosion model. This result shows that hard x-ray radiation enables us to apply Coulomb explosion imaging even for complex molecules such as benzene molecules.

  15. Monte Carlo simulation of dynamic phase transitions and frequency dispersions of hysteresis curves in core/shell ferrimagnetic cubic nanoparticle

    Energy Technology Data Exchange (ETDEWEB)

    Vatansever, Erol, E-mail: erol.vatansever@deu.edu.tr

    2017-05-10

    By means of Monte Carlo simulation method with Metropolis algorithm, we elucidate the thermal and magnetic phase transition behaviors of a ferrimagnetic core/shell nanocubic system driven by a time dependent magnetic field. The particle core is composed of ferromagnetic spins, and it is surrounded by an antiferromagnetic shell. At the interface of the core/shell particle, we use antiferromagnetic spin–spin coupling. We simulate the nanoparticle using classical Heisenberg spins. After a detailed analysis, our Monte Carlo simulation results suggest that present system exhibits unusual and interesting magnetic behaviors. For example, at the relatively lower temperature regions, an increment in the amplitude of the external field destroys the antiferromagnetism in the shell part of the nanoparticle, leading to a ground state with ferromagnetic character. Moreover, particular attention has been dedicated to the hysteresis behaviors of the system. For the first time, we show that frequency dispersions can be categorized into three groups for a fixed temperature for finite core/shell systems, as in the case of the conventional bulk systems under the influence of an oscillating magnetic field. - Highlights: • Cubic core/shell nanoparticle is considered. • Monte-Carlo simulation with Metropolis algorithm is used. • The particle is subjected to time dependent oscillating magnetic field. • External field destroys the antiferromagnetism in the shell part of particle. • Frequency dispersions of hysteresis loop areas can be categorized into three groups.

  16. 7 CFR 201.21 - Hard seed.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Hard seed. 201.21 Section 201.21 Agriculture..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Agricultural Seeds § 201.21 Hard seed. The label shall show the percentage of hard...

  17. 7 CFR 201.30 - Hard seed.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Hard seed. 201.30 Section 201.30 Agriculture..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.30 Hard seed. The label shall show the percentage of hard seed,...

  18. Ab-initio molecular dynamics simulation on nano-system under external pressure

    Institute of Scientific and Technical Information of China (English)

    JI; Min; SUN; Deyan; GONG; Xingao

    2004-01-01

    A new constant-pressure molecular dynamics (MD) method is developed to simulate the dynamic behavior and structure transition of finite system under external pressure. In this method, no artificial parameter is introduced and the computation overheads are very small. As an application, a hard-soft transition of single wall carbon nanotube (SWCNT) under external pressure is found, which is in agreement with the experiments.

  19. Method and apparatus for an inflatable shell

    Science.gov (United States)

    Johnson, Christopher J. (Inventor)

    2012-01-01

    A method of assembling an inflatable shell of a structure comprises folding a plurality of shell sections about a set of fold lines and integrating the plurality of shell sections together with one another to form the shell. In another embodiment, an inflatable shell comprises a plurality of shell sections, each shell section having two pairs of fold lines for folding into stowage comprising a first gore section having a plurality of first gore panels layered and collectively folded about at a first set of fold lines. Each layer of the first gore panels and second gore panels are configured such that, once the first gore panel and second gore panel are attached to one another at the respective side edges of each panel, the lines of attachment forming a second set of fold lines for the shell section. A system and method for fabricating gore panels is also disclosed.

  20. Stability of GOY Model Under Modulation of Periodic External Force

    Institute of Scientific and Technical Information of China (English)

    ZHAO Ying-Kui; CHEN Shi-Gang; WANG Guang-Rui

    2008-01-01

    There is a phase transition between quasi-periodic state and intermittent chaos in GOY model with a critical value δ0. When we add a modulated periodic external force to the system, the phase transition can also be found with a critical value δe. Due to coupling between the force and the intrinsic fluctuation of the velocity on shells in GOY model, the stability of the system has been changed, which results in the variation of the critical value. For proper intensity and period of the force, δe is unequal to δ0. The critical value is a nonlinear function of amplitude of the force, and the fluctuation of the velocity can resonate with the external force for certain period Te.

  1. ExternE transport methodology for external cost evaluation of air pollution

    DEFF Research Database (Denmark)

    Jensen, S. S.; Berkowicz, R.; Brandt, J.

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summaris...... how the methodology has been applied so far in a previous Danish study. Finally, results of a case study are reported. Exposure factors have been calculated for various urban categories in the Greater Copenhagen Area...

  2. ExternE transport methodology for external cost evaluation of air pollution (DK)

    Energy Technology Data Exchange (ETDEWEB)

    Solvang Jensen, S.; Berkowicz, R.; Brandt, J. [National Environmental Research Inst., Dept. of Atmospheric Environment (Denmark); Willumsen, E.; Kristensen, N.B. [COWI (Denmark)

    2004-07-01

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AiGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Inititally, a brief description of the ExternE Transport methodology is given and it is summarised how the methodology has been applied so far in a previous Danish study. Finally, results of a case study are reported. Exposure factors have been calculated for various urban categories in the Greater Copenhagen Area. (au)

  3. Architecture engineering toward highly active palladium integrated titanium dioxide yolk-double-shell nanoreactor for catalytic applications

    Science.gov (United States)

    Liu, Baocang; Wang, Qin; Yu, Shengli; Jing, Peng; Liu, Lixia; Xu, Guangran; Zhang, Jun

    2014-09-01

    Rational design of the hierarchical architecture of a material with well controlled functionality is crucially important for improving its properties. In this paper, we present the general strategies for rationally designing and constructing three types of hierarchical Pd integrated TiO2 double-shell architectures, i.e. yolk-double-shell TiO2 architecture (Pd@TiO2/Pd@TiO2) with yolk-type Pd nanoparticles residing inside the central cavity of the hollow TiO2 structure; ultrafine Pd nanoparticles homogenously dispersed on both the external and internal surfaces of the inner TiO2 shell; and double-shell TiO2 architecture (@TiO2/Pd@TiO2) with Pd nanoparticles solely loaded on the external surface of the inner TiO2 shell, and double-shell TiO2 architecture (@TiO2@Pd@TiO2) with Pd nanoparticles dispersed in the interlayer space of double TiO2 shells, via newly developed Pd2+ ion-diffusion and Pd sol impregnation methodologies. These architectures are well controlled in structure, size, morphology, and configuration with Pd nanoparticles existing in various locations. Owing to the variable synergistic effects arising from the location discrepancies of Pd nanoparticle in the architectures, they exhibit remarkable variations in catalytic activity. In particular, different from previously reported yolk-shell structures, the obtained yolk-double-shell Pd@TiO2/Pd@TiO2 architecture, which is revealed for the first time, possesses a uniform hierarchical structure, narrow size distribution, and good monodispersibility, and it creates two Pd-TiO2 interfaces on the external and internal surfaces of the inner TiO2 shell, leading to the strongest synergistic effect of Pd nanoparticles with TiO2 shell. Furthermore, the interlayer chamber between the double TiO2 shells connecting with the central cavity of the hollow TiO2 structure through the mesoporous TiO2 wall forms a nanoreactor for enriching the reactants and preventing the deletion of Pd nanoparticles during the reaction, thus

  4. Electrocaloric effect in core-shell ferroelectric ceramics: Theoretical approach and practical conclusions

    Science.gov (United States)

    Anoufa, M.; Kiat, J. M.; Bogicevic, C.

    2015-10-01

    Most of the theoretical and experimental studies on the electrocaloric effect (ECE) are devoted to thin films, but they can be hardly envisaged for cooling macroscopic systems; moreover, the results obtained cannot be easily transposed for larger systems like multilayered ceramics. Therefore, efforts should also be focused on predicting, synthesizing, and characterizing interesting bulk single crystal or ceramics. In ferroelectric nanoparticles and ceramics, the core-shell structure of grains is of uttermost importance to explain the experimental results at small sizes. Moreover, it can be used to tailor physical properties, such as energy storage, by experimenting with the composition, thickness, and permittivity of the shell. Here, we report the effect of such structures on the electrocaloric effects in a variety of ferroelectric materials. The magnitude of ECE as well as its field and temperature-dependence are obtained for different types of core-shells. The optimal configuration for a maximal ECE is deduced.

  5. Shell Global Solutions Ready to Benefit China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Thanks to rising oil prices, Global oil giant Royal Dutch Shell has made huge profits - $9 billion - last quarter. Yet the oil giant's main profits come from the exploration of crude oil. Shell Global Solution (SGS),a unit of Shell, is also focusing on providing advanced technology to help Shell's petroleum-related industry segments and its third-party customers to deal with the high price of fossil fuel.

  6. STUDY OF SHELL FOR ENERGY EFFICIENT OF SUSTAINABLE LOW-RISE BUILDING

    Directory of Open Access Journals (Sweden)

    DANISHEVSKYI V. V.

    2016-03-01

    Full Text Available The article presents the results of study the shell for energy-efficient environmental low-rise residential building, corresponding to the criteria of sustainable development in construction. Purpose. The purpose of the presented research is providing a study of parameters for shell of energy-efficient environmental low-rise buildings. Methodology. Research is carried out on the basis of an improved method for calculating the thermal characteristics of the external walling, as well as physical heat transfer simulation. Conclusion.The ratio between the thickness of external walling and the proportion of heat loss through them was determined, and also the heat loss through thermal "bridges" was studied. Originality. The limits for the optimum thickness of the external walling of ecological materials was analyzed, and it was offered solution for minimization of heat loss through the nodes of shell. Practical value.Recommendations are worked out on constructing of thermal shell at planning of energy-efficient low-rise residential buildings.

  7. External coating of colonic anastomoses

    DEFF Research Database (Denmark)

    Pommergaard, Hans-Christian; Achiam, Michael Patrick; Rosenberg, Jacob

    2012-01-01

    Colon anastomotic leakage remains both a frequent and serious complication in gastrointestinal surgery. External coating of colonic anastomoses has been proposed as a means to lower the rate of this complication. The aim of this review was to evaluate existing studies on external coating of colonic...

  8. Retrofitting Systems for External Walls

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    In this report, 9 different external and internal retrofitting systems are analyzed using numerical calculations. The analysis focuses on the thermal bridge effects in the different systems, and on this basis it is discussed whether internal or external retrofitting has the most advantages...

  9. Shell theorem for spontaneous emission

    DEFF Research Database (Denmark)

    Kristensen, Philip Trøst; Mortensen, Jakob Egeberg; Lodahl, Peter;

    2013-01-01

    and therefore is given exactly by the dipole approximation theory. This surprising result is a spontaneous emission counterpart to the shell theorems of classical mechanics and electrostatics and provides insights into the physics of mesoscopic emitters as well as great simplifications in practical calculations....

  10. Observability inequalities for thin shells

    Institute of Scientific and Technical Information of China (English)

    柴树根; 姚鹏飞

    2003-01-01

    We consider the exact controllability problem from boundary for thin shells. Under some check-able geometric assumptions on the middle surface, we establish the observability inequalities via the Bochnertechnique for the Dirichlet control and the Neumann control problems. We also give several examples to verifythe geometric assumptions.

  11. The hard problem of cooperation.

    Directory of Open Access Journals (Sweden)

    Kimmo Eriksson

    Full Text Available Based on individual variation in cooperative inclinations, we define the "hard problem of cooperation" as that of achieving high levels of cooperation in a group of non-cooperative types. Can the hard problem be solved by institutions with monitoring and sanctions? In a laboratory experiment we find that the answer is affirmative if the institution is imposed on the group but negative if development of the institution is left to the group to vote on. In the experiment, participants were divided into groups of either cooperative types or non-cooperative types depending on their behavior in a public goods game. In these homogeneous groups they repeatedly played a public goods game regulated by an institution that incorporated several of the key properties identified by Ostrom: operational rules, monitoring, rewards, punishments, and (in one condition change of rules. When change of rules was not possible and punishments were set to be high, groups of both types generally abided by operational rules demanding high contributions to the common good, and thereby achieved high levels of payoffs. Under less severe rules, both types of groups did worse but non-cooperative types did worst. Thus, non-cooperative groups profited the most from being governed by an institution demanding high contributions and employing high punishments. Nevertheless, in a condition where change of rules through voting was made possible, development of the institution in this direction was more often voted down in groups of non-cooperative types. We discuss the relevance of the hard problem and fit our results into a bigger picture of institutional and individual determinants of cooperative behavior.

  12. Shell morphology of core-shell latexes based on conductive polymers

    NARCIS (Netherlands)

    Huijs, F.M; Vercauteren, F.F.; de Ruiter, B.; Kalicharan, D; Hadziioannou, G

    Core-shell latexes with a conductive shell can be used to prepare transparent conducting layers. We have focussed on the relation between the conducting polymer content and the shell morphology and on its influence on conductivity. At low polypyrrole (PPy) concentrations the shell has a smooth

  13. Systematic hardness studies on lithium niobate crystals

    Indian Academy of Sciences (India)

    K G Subhadra; K Kishan Rao; D B Sirdeshmukh

    2000-04-01

    In view of discrepancies in the available information on the hardness of lithium niobate, a systematic study of the hardness has been carried out. Measurements have been made on two pure lithium niobate crystals with different growth origins, and a Fe-doped sample. The problem of load variation of hardness is examined in detail. The true hardness of LiNbO3 is found to be 630 ± 30 kg/mm2. The Fe-doped crystal has a larger hardness of 750 ± 50 kg/mm2.

  14. Hard Identity and Soft Identity

    Directory of Open Access Journals (Sweden)

    Hassan Rachik

    2006-04-01

    Full Text Available Often collective identities are classified depending on their contents and rarely depending on their forms. Differentiation between soft identity and hard identity is applied to diverse collective identities: religious, political, national, tribal ones, etc. This classification is made following the principal dimensions of collective identities: type of classification (univocal and exclusive or relative and contextual, the absence or presence of conflictsof loyalty, selective or totalitarian, objective or subjective conception, among others. The different characteristics analysed contribute to outlining an increasingly frequent type of identity: the authoritarian identity.

  15. Sampling hard to reach populations.

    Science.gov (United States)

    Faugier, J; Sargeant, M

    1997-10-01

    Studies on 'hidden populations', such as homeless people, prostitutes and drug addicts, raise a number of specific methodological questions usually absent from research involving known populations and less sensitive subjects. This paper examines the advantages and limitations of nonrandom methods of data collection such as snowball sampling. It reviews the currently available literature on sampling hard to reach populations and highlights the dearth of material currently available on this subject. The paper also assesses the potential for using these methods in nursing research. The sampling methodology used by Faugier (1996) in her study of prostitutes, HIV and drugs is used as a current example within this context.

  16. Radiation Hardness Assurance (RHA) Guideline

    Science.gov (United States)

    Campola, Michael J.

    2016-01-01

    Radiation Hardness Assurance (RHA) consists of all activities undertaken to ensure that the electronics and materials of a space system perform to their design specifications after exposure to the mission space environment. The subset of interests for NEPP and the REAG, are EEE parts. It is important to register that all of these undertakings are in a feedback loop and require constant iteration and updating throughout the mission life. More detail can be found in the reference materials on applicable test data for usage on parts.

  17. Thermopile detector radiation hard readout

    Science.gov (United States)

    Gaalema, Stephen; Van Duyne, Stephen; Gates, James L.; Foote, Marc C.

    2010-08-01

    The NASA Jupiter Europa Orbiter (JEO) conceptual payload contains a thermal instrument with six different spectral bands ranging from 8μm to 100μm. The thermal instrument is based on multiple linear arrays of thermopile detectors that are intrinsically radiation hard; however, the thermopile CMOS readout needs to be hardened to tolerate the radiation sources of the JEO mission. Black Forest Engineering is developing a thermopile readout to tolerate the JEO mission radiation sources. The thermal instrument and ROIC process/design techniques are described to meet the JEO mission requirements.

  18. Performance Targets and External Benchmarking

    DEFF Research Database (Denmark)

    Friis, Ivar; Hansen, Allan; Vámosi, Tamás S.

    Research on relative performance measures, transfer pricing, beyond budgeting initiatives, target costing, piece rates systems and value based management has for decades underlined the importance of external benchmarking in performance management. Research conceptualises external benchmarking...... the conditions upon which the market mechanism is performing within organizations. This paper aims to contribute to research by providing more insight to the conditions for the use of external benchmarking as an element in performance management in organizations. Our study explores a particular type of external...... towards the conditions for the use of the external benchmarks we provide more insights to some of the issues and challenges that are related to using this mechanism for performance management and advance competitiveness in organizations....

  19. Non-Hodgkin′s lymphoma of the hard palate

    Directory of Open Access Journals (Sweden)

    Jayakrishnan R

    2008-01-01

    Full Text Available Background: Non-Hodgkin′s lymphoma usually involves lymph nodes but can also involve extranodal sites. Oral lymphomas are relatively rare and often difficult to diagnose in a clinical setting. We present a case of a patient of non-Hodgkin′s lymphoma of the hard palate who had undergone external beam radiation therapy and was found to be well 1 year following treatment. Case presentation: A 43-year-old male attended the Community Oncology Division of Regional Cancer Centre with complaints of painless swelling on the right side of face of three months′ duration. A computed tomography (CT scan confirmed irregular destruction of the hard palate towards the right side of the midline with adjacent soft tissue component. Histopathology report confirmed the diagnosis of follicular lymphoma. He was given radical external beam radiation therapy (40 Gy in 20 fractions over 4 weeks. Clinical examination at the end of radiation revealed complete disappearance of the palatal swelling. Conclusion: Oral lymphomas are relatively rare and often difficult to diagnose as the clinical features mimic other pathological entities such as periodontal disease, osteomyelitis, and other malignancies. A careful clinical evaluation supported by radiologic and histopathologic investigations will help in identifying the disease at an early stage, which will result in better prognosis.

  20. 21 CFR 886.3800 - Scleral shell.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Scleral shell. 886.3800 Section 886.3800 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Prosthetic Devices § 886.3800 Scleral shell. (a) Identification. A scleral shell is...

  1. Shell China Promotes Localization of Employees

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Shell China Limited's Executive Chairman Lim Haw Kuang is unquestionably an effective reformer for the Beijing-based company. He localized Shell China Limited's leadership team with Chinese employees going from zero to a majority in three years, and engineered the turnaround of Shell's business in China.

  2. 7 CFR 983.29 - Shelled pistachios.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Shelled pistachios. 983.29 Section 983.29 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA, ARIZONA, AND NEW MEXICO Definitions § 983.29 Shelled pistachios. Shelled pistachios means...

  3. Shell Expands Polystyrene Joint Venture in China

    Institute of Scientific and Technical Information of China (English)

    1997-01-01

    @@ Shell China Ltd. and Shell China Holdings BV, both wholly owned subsidiaries and part of the Royal Dutch/Shell Group of Companies, have signed a joint-venture agreement with Jinling Petrochemical Corporation (JPC) on October 17, 1997, in Nanjing, the East China's Jiangsu Province.

  4. Protein profiles of hatchery egg shell membrane

    Science.gov (United States)

    Background: Eggshells, which consist largely of calcareous outer shell and shell membranes, constitute a significant part of poultry hatchery waste. The shell membranes (ESM) not only contain proteins that originate from egg whites but also from the developing embryos and different contaminants of m...

  5. Effective Finite Elements for Shell Analysis.

    Science.gov (United States)

    1984-02-20

    conjunction with a shallow shell theory . It 2 should be noteJ that contrary to the results of earlier investigators [12,19], use of a shallow shell theory in...the inadequacy of the shallow shell theory for the relatively deep element emerging from such a coarse mesh. A considerable improvement is obtained

  6. Vibrations of cantilevered circular cylindrical shells Shallow versus deep shell theory

    Science.gov (United States)

    Lee, J. K.; Leissa, A. W.; Wang, A. J.

    1983-01-01

    Free vibrations of cantilevered circular cylindrical shells having rectangular planforms are studied in this paper by means of the Ritz method. The deep shell theory of Novozhilov and Goldenveizer is used and compared with the usual shallow shell theory for a wide range of shell parameters. A thorough convergence study is presented along with comparisons to previously published finite element solutions and experimental results. Accurately computed frequency parameters and mode shapes for various shell configurations are presented. The present paper appears to be the first comprehensive study presenting rigorous comparisons between the two shell theories in dealing with free vibrations of cantilevered cylindrical shells.

  7. Multi-scale hierarchy of Chelydra serpentina: microstructure and mechanical properties of turtle shell.

    Science.gov (United States)

    Balani, Kantesh; Patel, Riken R; Keshri, Anup K; Lahiri, Debrupa; Agarwal, Arvind

    2011-10-01

    Carapace, the protective shell of a freshwater snapping turtle, Chelydra serpentina, shields them from ferocious attacks of their predators while maintaining light-weight and agility for a swim. The microstructure and mechanical properties of the turtle shell are very appealing to materials scientists and engineers for bio-mimicking, to obtain a multi-functional surface. In this study, we have elucidated the complex microstructure of a dry Chelydra serpentina's shell which is very similar to a multi-layered composite structure. The microstructure of a turtle shell's carapace elicits a sandwich structure of waxy top surface with a harder sub-surface layer serving as a shielding structure, followed by a lamellar carbonaceous layer serving as shock absorber, and the inner porous matrix serves as a load-bearing scaffold while acting as reservoir of retaining water and nutrients. The mechanical properties (elastic modulus and hardness) of various layers obtained via nanoindentation corroborate well with the functionality of each layer. Elastic modulus ranged between 0.47 and 22.15 GPa whereas hardness varied between 53.7 and 522.2 MPa depending on the microstructure of the carapace layer. Consequently, the modulus of each layer was represented into object oriented finite element (OOF2) modeling towards extracting the overall effective modulus of elasticity (~4.75 GPa) of a turtle's carapace. Stress distribution of complex layered structure was elicited with an applied strain of 1% in order to understand the load sharing of various composite layers in the turtle's carapace.

  8. Parametric vibrations and stability of viscoelastic shells

    Science.gov (United States)

    Ilyasov, M. H.

    2010-05-01

    The problem of dynamic stability of viscoelastic extremely shallow and circular cylindrical shells with any hereditary properties, including time-dependence of Poisson’s ratio, are reduced to the investigation of stability of the zero solution of an ordinary integro-differential equation with variable coefficients. Using the Laplace integral transform, an integro-differential equation is reduced to the new integro-differential one of which the main part coincides with the damped Hill equation and the integral part is proportional to the product of two small parameters. Changing this equation for the system of two linear equations of the first order and using the averaging method, the monodromy matrix of the obtained system is constructed. Considering the absolute value of the eigen-values of monodromy matrix is greater than unit, the condition for instability of zero solution is obtained in the three-dimensional space of parameters corresponding to the frequency, viscosity and amplitude of external action. Analysis of form and size of instability domains is carried out.

  9. Revisiting on-shell renormalization conditions in theories with flavour mixing

    CERN Document Server

    Grimus, W

    2016-01-01

    In this review, we present a derivation of the on-shell renormalization conditions for scalar and fermionic fields in theories with and without parity conservation. We also discuss the specifics of Majorana fermions. Our approach only assumes a canonical form for the renormalized propagators and exploits the fact that the inverse propagators are non-singular in $\\varepsilon = p^2 - m_n^2$, where $p$ is the external four-momentum and $m_n$ is a pole mass. In this way, we obtain full agreement with commonly used on-shell conditions. We also discuss how they are implemented in renormalization.

  10. Revisiting on-shell renormalization conditions in theories with flavor mixing

    Science.gov (United States)

    Grimus, W.; Löschner, M.

    2016-08-01

    In this review, we present a derivation of the on-shell renormalization conditions for scalar and fermionic fields in theories with and without parity conservation. We also discuss the specifics of Majorana fermions. Our approach only assumes a canonical form for the renormalized propagators and exploits the fact that the inverse propagators are nonsingular in 𝜀 = p2 - m n2, where p is the external four-momentum and mn is a pole mass. In this way, we obtain full agreement with commonly used on-shell conditions. We also discuss how they are implemented in renormalization.

  11. Ultrastructural studies on the nematode Xiphinema diversicaudatum: Egg shell formation.

    Science.gov (United States)

    Bleve-Zacheo, T; Melillo, M T; Zacheo, G

    1993-06-01

    The ultrastructure of the formation of the egg shell in the longidorid nematode Xiphinema diversicaudatum is described. Upon fertilization a vitelline membrane, which constitutes the vitelline layer of the egg shell, is formed. The chitinous layer is secreted in the perivitelline space, between the vitelline layer and the egg cell membrane. On completion of the chitinous layer, the material of the lipid layer is extruded from the egg cytoplasm to the outer surface, through finger-like projections. Both chitinous and lipid layers are secreted by granules in the egg cytoplasm that disappear as the layers are completed. Chitinous and lipid layers are formed during the passage of the egg through the oviduct. The vitelline layer is enriched with secretions produced by the oviduct cells and then by phospholipids secreted by the cells of the pars dilatata oviductus. The inner uterine layer is also formed by deposition of secretory products apposed on the egg shell in the distal uterine region and Z-differentiation. In the proximal part of the uterus, the egg has a discontinuous electron-dense layer, the external uterine layer. Tangential sections between chitinous and uterine layers revealed the presence of holes, possibly egg pores, delimited by the two uterine layers.

  12. Shell bone histology indicates terrestrial palaeoecology of basal turtles.

    Science.gov (United States)

    Scheyer, Torsten M; Sander, P Martin

    2007-08-07

    The palaeoecology of basal turtles from the Late Triassic was classically viewed as being semi-aquatic, similar to the lifestyle of modern snapping turtles. Lately, this view was questioned based on limb bone proportions, and a terrestrial palaeoecology was suggested for the turtle stem. Here, we present independent shell bone microstructural evidence for a terrestrial habitat of the oldest and basal most well-known turtles, i.e. the Upper Triassic Proterochersis robusta and Proganochelys quenstedti. Comparison of their shell bone histology with that of extant turtles preferring either aquatic habitats or terrestrial habitats clearly reveals congruence with terrestrial turtle taxa. Similarities in the shell bones of these turtles are a diploe structure with well-developed external and internal cortices, weak vascularization of the compact bone layers and a dense nature of the interior cancellous bone with overall short trabeculae. On the other hand, 'aquatic' turtles tend to reduce cortical bone layers, while increasing overall vascularization of the bone tissue. In contrast to the study of limb bone proportions, the present study is independent from the uncommon preservation of appendicular skeletal elements in fossil turtles, enabling the palaeoecological study of a much broader range of incompletely known turtle taxa in the fossil record.

  13. Spawning Coordination of Mates in a Shell Brooding Cichlid

    Directory of Open Access Journals (Sweden)

    Dolores Schütz

    2012-01-01

    Full Text Available Aim. External fertilisation requires synchronisation of gamete release between the two sexes. Adequate synchronisation is essential in aquatic media because sperm is very short-lived in water. In the cichlid Lamprologus callipterus, fertilisation of the eggs takes place inside an empty snail shell, where females stay inside the shell and males have to ejaculate into the shell opening. This spawning pattern makes the coordination of gamete release difficult. Methods. This study examined the synchronisation of males and females during egg laying. Results. The results showed that the male initiates each spawning sequence and that sperm release and egg laying are very well synchronised. 68% of all sperm releases occurred at exactly the same time when the female laid an egg, and 99% of ejaculations occurred within ±5 seconds from egg deposition. On average 95 eggs are laid one by one with intervals of several minutes between subsequent eggs, leading to a total spawning duration in excess of six hours. Conclusions. We discuss this exceptional spawning pattern and how it might reflect a conflict between the sexes, with males attempting to induce egg laying and females extending the egg laying period to raise the chance for parasitic males to participate in spawning.

  14. Hard Fault Analysis of Trivium

    CERN Document Server

    Yupu, Hu; Yiwei, Zhang

    2009-01-01

    Fault analysis is a powerful attack to stream ciphers. Up to now, the major idea of fault analysis is to simplify the cipher system by injecting some soft faults. We call it soft fault analysis. As a hardware-oriented stream cipher, Trivium is weak under soft fault analysis. In this paper we consider another type of fault analysis of stream cipher, which is to simplify the cipher system by injecting some hard faults. We call it hard fault analysis. We present the following results about such attack to Trivium. In Case 1 with the probability not smaller than 0.2396, the attacker can obtain 69 bits of 80-bits-key. In Case 2 with the probability not smaller than 0.2291, the attacker can obtain all of 80-bits-key. In Case 3 with the probability not smaller than 0.2291, the attacker can partially solve the key. In Case 4 with non-neglectable probability, the attacker can obtain a simplified cipher, with smaller number of state bits and slower non-linearization procedure. In Case 5 with non-neglectable probability,...

  15. Hard X-ray mirrors for Nuclear Security

    Energy Technology Data Exchange (ETDEWEB)

    Descalle, M. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Brejnholt, N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hill, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Decker, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Alameda, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Soufli, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pivovaroff, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pardini, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-01-07

    Research performed under this LDRD aimed to demonstrate the ability to detect and measure hard X-ray emissions using multilayer X-ray reflective optics above 400 keV, to enable the development of inexpensive and high-accuracy mirror substrates, and to investigate applications of hard X-ray mirrors of interest to the nuclear security community. Experiments conducted at the European Synchrotron Radiation Facility demonstrated hard X-ray mirror reflectivity up to 650 keV for the first time. Hard X-ray optics substrates must have surface roughness under 3 to 4 Angstrom rms, and three materials were evaluated as potential substrates: polycarbonates, thin Schott glass and a new type of flexible glass called Willow Glass®. Chemical smoothing and thermal heating of the surface of polycarbonate samples, which are inexpensive but have poor intrinsic surface characteristics, did not yield acceptable surface roughness. D263 Schott glass was used for the focusing optics of the NASA NuSTAR telescope. The required specialized hardware and process were costly and motivated experiments with a modified non-contact slumping technique. The surface roughness of the glass was preserved and the process yielded cylindrical shells with good net shape pointing to the potential advantage of this technique. Finally, measured surface roughness of 200 and 130 μm thick Willow Glass sheets was between 2 and 2.5 A rms. Additional results of flexibility tests and multilayer deposition campaigns indicated it is a promising substrate for hard X-ray optics. The detection of U and Pu characteristics X-ray lines and gamma emission lines in a high background environment was identified as an area for which X-ray mirrors could have an impact and where focusing optics could help reduce signal to noise ratio by focusing signal onto a smaller detector. Hence the first one twelvetant of a Wolter I focusing optics for the 90 to 140 keV energy range based on aperiodic multilayer coating was designed. Finally

  16. External costs related to power production technologies. ExternE national implementation for Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Schleisner, L.; Sieverts Nielsen, P.

    1997-12-01

    The objective of the ExternE National Implementation project has been to establish a comprehensive and comparable set of data on externalities of power generation for all EU member states and Norway. The tasks include the application of the ExternE methodology to the most important fuel cycles for each country as well as to update the already existing results; to aggregate these site- and technology-specific results to more general figures. The current report covers the results of the national implementation for Denmark. Three different fuel cycles have been chosen as case studies. These are fuel cycles for an offshore wind farm and a wind farm on land, a decentralised CHP plant based on natural gas and a decentralised CHP plant based on biogas. The report covers all the details of the application of the methodology to these fuel cycles aggregation to a national level. (au) EU-JOULE 3. 59 tabs., 25 ills., 61 refs.

  17. Isostructural solid-solid phase transition in monolayers of soft core-shell particles at fluid interfaces: structure and mechanics.

    Science.gov (United States)

    Rey, Marcel; Fernández-Rodríguez, Miguel Ángel; Steinacher, Mathias; Scheidegger, Laura; Geisel, Karen; Richtering, Walter; Squires, Todd M; Isa, Lucio

    2016-04-21

    We have studied the complete two-dimensional phase diagram of a core-shell microgel-laden fluid interface by synchronizing its compression with the deposition of the interfacial monolayer. Applying a new protocol, different positions on the substrate correspond to different values of the monolayer surface pressure and specific area. Analyzing the microstructure of the deposited monolayers, we discovered an isostructural solid-solid phase transition between two crystalline phases with the same hexagonal symmetry, but with two different lattice constants. The two phases corresponded to shell-shell and core-core inter-particle contacts, respectively; with increasing surface pressure the former mechanically failed enabling the particle cores to come into contact. In the phase-transition region, clusters of particles in core-core contacts nucleate, melting the surrounding shell-shell crystal, until the whole monolayer moves into the second phase. We furthermore measured the interfacial rheology of the monolayers as a function of the surface pressure using an interfacial microdisk rheometer. The interfaces always showed a strong elastic response, with a dip in the shear elastic modulus in correspondence with the melting of the shell-shell phase, followed by a steep increase upon the formation of a percolating network of the core-core contacts. These results demonstrate that the core-shell nature of the particles leads to a rich mechanical and structural behavior that can be externally tuned by compressing the interface, indicating new routes for applications, e.g. in surface patterning or emulsion stabilization.

  18. Design aids for stiffened composite shells with cutouts

    CERN Document Server

    Sahoo, Sarmila

    2017-01-01

    This book focuses on the free vibrations of graphite-epoxy laminated composite stiffened shells with cutout both in terms of the natural frequencies and mode shapes. The dynamic analysis of shell structures, which may have complex geometry and arbitrary loading and boundary conditions, is solved efficiently by the finite element method, even including cutouts in shells. The results may be readily used by practicing engineers dealing with stiffened composite shells with cutouts. Several shell forms viz. cylindrical shell, hypar shell, conoidal shell, spherical shell, saddle shell, hyperbolic paraboloidal shell and elliptic paraboloidal shell are considered in the book. The dynamic characteristics of stiffened composite shells with cutout are described in terms of the natural frequency and mode shapes. The size of the cutouts and their positions with respect to the shell centre are varied for different edge constraints of cross-ply and angle-ply laminated composite shells. The effects of these parametric variat...

  19. Magnetite/poly(alkylcyanoacrylate) (core/shell) nanoparticles as 5-Fluorouracil delivery systems for active targeting.

    Science.gov (United States)

    Arias, José L; Gallardo, Visitación; Ruiz, M A Adolfina; Delgado, Angel V

    2008-05-01

    In this article, a reproducible emulsion polymerization process is described to prepare core/shell colloidal nanospheres, loaded with 5-Fluorouracil, and consisting of a magnetic core (magnetite) and a biodegradable polymeric shell [poly(ethyl-2-cyanoacrylate), poly(butylcyanoacrylate), poly(hexylcyanoacrylate), or poly(octylcyanoacrylate)]. The heterogeneous structure of these carriers can confer them both the possibility of being used as drug delivery systems and the responsiveness to external magnetic fields, allowing an active drug targeting without a concurrent systemic distribution. Zeta potential determinations as a function of ionic strength showed that the surface behaviour of the core/shell particles is similar to that of pure cyanoacrylate particles. The first magnetization curve of both magnetite and magnetite/polymer particles demonstrated that the polymer shell reduces the magnetic responsiveness of the particles, but keeps unchanged their ferrimagnetic character. Two drug loading mechanisms were studied: absorption or entrapment in the polymeric network, and surface adsorption. We found that the acidity of the medium had significant effects on the drug absorption per unit mass of polymer, and needs to be controlled to avoid formation of macroaggregates and to reach significant 5-Fluorouracil absorption. The type of polymer and the drug concentration are also main factors determining the drug incorporation to the core/shell particles. 5-Fluorouracil release evaluations showed a biphasic profile affected by the type of polymeric shell, the type of drug incorporation and the amount of drug loaded.

  20. The Shell of the Invasive Bivalve Species Dreissena polymorpha: Biochemical, Elemental and Textural Investigations.

    Directory of Open Access Journals (Sweden)

    Françoise Immel

    Full Text Available The zebra mussel Dreissena polymorpha is a well-established invasive model organism. Although extensively used in environmental sciences, virtually nothing is known of the molecular process of its shell calcification. By describing the microstructure, geochemistry and biochemistry/proteomics of the shell, the present study aims at promoting this species as a model organism in biomineralization studies, in order to establish a bridge with ecotoxicology, while sketching evolutionary conclusions. The shell of D. polymorpha exhibits the classical crossed-lamellar/complex crossed lamellar combination found in several heterodont bivalves, in addition to an external thin layer, the characteristics of which differ from what was described in earlier publication. We show that the shell selectively concentrates some heavy metals, in particular uranium, which predisposes D. polymorpha to local bioremediation of this pollutant. We establish the biochemical signature of the shell matrix, demonstrating that it interacts with the in vitro precipitation of calcium carbonate and inhibits calcium carbonate crystal formation, but these two properties are not strongly expressed. This matrix, although overall weakly glycosylated, contains a set of putatively calcium-binding proteins and a set of acidic sulphated proteins. 2D-gels reveal more than fifty proteins, twenty of which we identify by MS-MS analysis. We tentatively link the shell protein profile of D. polymorpha and the peculiar recent evolution of this invasive species of Ponto-Caspian origin, which has spread all across Europe in the last three centuries.

  1. Nonlinear dynamics of initially imperfect functionally graded circular cylindrical shell under complex loads

    Science.gov (United States)

    Liu, Y. Z.; Hao, Y. X.; Zhang, W.; Chen, J.; Li, S. B.

    2015-07-01

    The nonlinear vibration of a simply supported FGM cylindrical shell with small initial geometric imperfection under complex loads is studied. The effects of radial harmonic excitation, compressive in-plane force combined with supersonic aerodynamic and thermal loads are considered. The small initial geometric imperfection of the cylindrical shell is characterized in the form of the sine-type trigonometric functions. The effective material properties of this FGM cylindrical shell are graded in the radial direction according to a simple power law in terms of the volume fractions. Based on Reddy's third-order shear deformation theory, von Karman-type nonlinear kinematics and Hamilton's principle, the nonlinear partial differential equation that controls the shell dynamics is derived. Both axial symmetric and driven modes of the cylindrical shell deflection pattern are included. Furthermore, the equations of motion can be reduced into a set of coupled nonlinear ordinary differential equations by applying Galerkin's method. In the study of the nonlinear dynamics responses of small initial geometric imperfect FGM cylindrical shell under complex loads, the 4th order Runge-Kutta method is used to obtain time history, phase portraits, bifurcation diagrams and Poincare maps with different parameters. The effects of external loads, geometric imperfections and volume fractions on the nonlinear dynamics of the system are discussed.

  2. The Shell of the Invasive Bivalve Species Dreissena polymorpha: Biochemical, Elemental and Textural Investigations

    Science.gov (United States)

    Broussard, Cédric; Catherinet, Bastien; Plasseraud, Laurent; Alcaraz, Gérard; Bundeleva, Irina; Marin, Frédéric

    2016-01-01

    The zebra mussel Dreissena polymorpha is a well-established invasive model organism. Although extensively used in environmental sciences, virtually nothing is known of the molecular process of its shell calcification. By describing the microstructure, geochemistry and biochemistry/proteomics of the shell, the present study aims at promoting this species as a model organism in biomineralization studies, in order to establish a bridge with ecotoxicology, while sketching evolutionary conclusions. The shell of D. polymorpha exhibits the classical crossed-lamellar/complex crossed lamellar combination found in several heterodont bivalves, in addition to an external thin layer, the characteristics of which differ from what was described in earlier publication. We show that the shell selectively concentrates some heavy metals, in particular uranium, which predisposes D. polymorpha to local bioremediation of this pollutant. We establish the biochemical signature of the shell matrix, demonstrating that it interacts with the in vitro precipitation of calcium carbonate and inhibits calcium carbonate crystal formation, but these two properties are not strongly expressed. This matrix, although overall weakly glycosylated, contains a set of putatively calcium-binding proteins and a set of acidic sulphated proteins. 2D-gels reveal more than fifty proteins, twenty of which we identify by MS-MS analysis. We tentatively link the shell protein profile of D. polymorpha and the peculiar recent evolution of this invasive species of Ponto-Caspian origin, which has spread all across Europe in the last three centuries. PMID:27213644

  3. Structural and magnetic properties of core-shell Au/Fe3O4 nanoparticles

    Science.gov (United States)

    León Félix, L.; Coaquira, J. A. H.; Martínez, M. A. R.; Goya, G. F.; Mantilla, J.; Sousa, M. H.; Valladares, L. De Los Santos; Barnes, C. H. W.; Morais, P. C.

    2017-02-01

    We present a systematic study of core-shell Au/Fe3O4 nanoparticles produced by thermal decomposition under mild conditions. The morphology and crystal structure of the nanoparticles revealed the presence of Au core of d = (6.9 ± 1.0) nm surrounded by Fe3O4 shell with a thickness of ~3.5 nm, epitaxially grown onto the Au core surface. The Au/Fe3O4 core-shell structure was demonstrated by high angle annular dark field scanning transmission electron microscopy analysis. The magnetite shell grown on top of the Au nanoparticle displayed a thermal blocking state at temperatures below TB = 59 K and a relaxed state well above TB. Remarkably, an exchange bias effect was observed when cooling down the samples below room temperature under an external magnetic field. Moreover, the exchange bias field (HEX) started to appear at T~40 K and its value increased by decreasing the temperature. This effect has been assigned to the interaction of spins located in the magnetically disordered regions (in the inner and outer surface of the Fe3O4 shell) and spins located in the ordered region of the Fe3O4 shell.

  4. Sound scattering by free surface piercing and fluid-loaded cylindrical shells.

    Science.gov (United States)

    Avital, Eldad J; Miloh, Touvia

    2011-07-28

    A vertical flexible, thin, cylindrical shell is considered to be clamped to a rigid base in shallow water and piercing its surface. The shell is composed of an isotropic and homogeneous material and may be empty inside or filled with compressible fluid. Linear acoustics and structural dynamics are used to model sound scattering caused by an external incident sound wave. A solution is derived using a Fourier transform in the tangential and vertical directions. A collocation technique coupled with an orthogonalization procedure is used to account for the edge conditions of the shell. It is shown that zero sound scattering, indicating acoustic invisibility, is theoretically attainable and can be achieved when a continuous distribution of an oscillating pressure load is applied on the shell's wall. Similarly, zero sound transmission into the shell's inner fluid can also be considered. The possibility of using a pre-determined discrete distribution of the applied pressure load is also discussed. The derived equations are numerically solved to examine sound scattering by a thin aluminium shell in shallow water.

  5. Shell Model Depiction of Isospin Mixing in sd Shell

    Energy Technology Data Exchange (ETDEWEB)

    Lam, Yi Hua; Smirnova, Nadya A. [CENBG (CNRS/IN2P3 - Universite Bordeaux 1) Chemin du Solarium, 33175 Gradignan (France); Caurier, Etienne [IPHC, IN2P3-CNRS et Universite Louis Pasteur, 67037 Strasbourg (France)

    2011-11-30

    We constructed a new empirical isospin-symmetry breaking (ISB) Hamiltonian in the sd(1s{sub 1/2}, 0d{sub 5/2} and 0d{sub 3/2}) shell-model space. In this contribution, we present its application to two important case studies: (i){beta}-delayed proton emission from {sup 22}Al and (ii) isospin-mixing correction to superallowed 0{sup +}{yields}0{sup +}{beta}-decay ft-values.

  6. Leatherback sea turtle shell: A tough and flexible biological design.

    Science.gov (United States)

    Chen, Irene H; Yang, Wen; Meyers, Marc A

    2015-12-01

    The leatherback sea turtle is unique among chelonians for having a soft skin which covers its osteoderms. The osteoderm is composed of bony plates that are interconnected with collagen fibers in a structure called suture. The soft dermis and suture geometry enable a significant amount of flexing of the junction between adjacent osteoderms. This design allows the body to contract better than a hard-shelled sea turtle as it dives to depths of over 1,000 m. The leatherback turtle has ridges along the carapace to enhance the hydrodynamic flow and provide a tailored stiffness. The osteoderms are of two types: flat and ridged. The structure of the two types of osteoderms is characterized and their mechanical properties are investigated with particular attention to the failure mechanisms. They both are bony structures with a porous core sandwiched between compact layers that form the outside and inside surfaces. The compressive strength is highly anisotropic by virtue of the interaction between loading orientation and arrangement of porous and compact components of osteoderms. The angle of interpenetration at the suture of osteoderms is analyzed and compared with analytical predictions. The sutures have a triangular shape with an angle of ∼30° which provides a balance between the tensile strength of the osteoderms and shear strength of the collagen fiber layer and is verified by Li-Ortiz-Boyce in a previous study. This is confirmed by an FEM analysis. A calculation is developed to quantify the flexibility of the carapace and plastron as a function of the angular displacement at the sutures, predicting the interdependence between geometrical parameters and flexibility. The leatherback turtle is a magnificent chelonian whose decreasing numbers have brought it to the brink of extinction in the Pacific Ocean. This first study of the structure of its shell provides important new insights that explain its amazing capacity for diving: depths of over 1,000 m have been recorded

  7. Characterisation and expression of the biomineralising gene Lustrin A during shell formation of the European abalone Haliotis tuberculata.

    Science.gov (United States)

    Gaume, B; Denis, F; Van Wormhoudt, A; Huchette, S; Jackson, D J; Avignon, S; Auzoux-Bordenave, S

    2014-03-01

    The molluscan shell is a remarkable product of a highly coordinated biomineralisation process, and is composed of calcium carbonate most commonly in the form of calcite or aragonite. The exceptional mechanical properties of this biomaterial are imparted by the embedded organic matrix which is secreted by the underlying mantle tissue. While many shell-matrix proteins have already been identified within adult molluscan shell, their presence and role in the early developmental stages of larval shell formation are not well understood. In the European abalone Haliotis tuberculata, the shell first forms in the early trochophore larva and develops into a mineralised protoconch in the veliger. Following metamorphosis, the juvenile shell rapidly changes as it becomes flattened and develops a more complex crystallographic profile including an external granular layer and an internal nacreous layer. Amongst the matrix proteins involved in abalone shell formation, Lustrin A is thought to participate in the formation of the nacreous layer. Here we have identified a partial cDNA coding for the Lustrin A gene in H. tuberculata and have analysed its spatial and temporal expression during abalone development. RT-PCR experiments indicate that Lustrin A is first expressed in juvenile (post-metamorphosis) stages, suggesting that Lustrin A is a component of the juvenile shell, but not of the larval shell. We also detect Lustrin A mRNAs in non-nacre forming cells at the distal-most edge of the juvenile mantle as well as in the nacre-forming region of the mantle. Lustrin A was also expressed in 7-day-old post-larvae, prior to the formation of nacre. These results suggest that Lustrin A plays multiple roles in the shell-forming process and further highlight the dynamic ontogenic nature of molluscan shell formation.

  8. External fuel thermionic reactor system.

    Science.gov (United States)

    Mondt, J. F.; Peelgren, M. L.

    1971-01-01

    Thermionic reactors are prime candidates for nuclear electric propulsion. The national thermionic reactor effort is concentrated on the flashlight concept with the external-fuel concept as the backup. The external-fuel concept is very adaptable to a completely modular power subsystem which is attractive for highly reliable long-life applications. The 20- to 25-cm long, externally-fueled converters have been designed, fabricated, and successfully tested with many thermal cycles by electrical heating. However, difficulties have been encountered during encapsulation for nuclear heated tests and none have been started to date. These nuclear tests are required to demonstrate the concept feasibility.

  9. Pressure Shell Approach to Integrated Environmental Protection

    Science.gov (United States)

    Kennedy, Kriss J.

    2011-01-01

    The next generation of exploration mission human systems will require environmental protection such as radiation protection that is effective and efficient. In order to continue human exploration, habitat systems will require special shells to protect astronauts from hostile environments. The Pressure Shell Approach to integrated environmental (radiation) protection is a multi-layer shell that can be used for multifunctional environmental protection. Self-healing, self-repairing nano technologies and sensors are incorporated into the shell. This shell consists of multiple layers that can be tailored for specific environmental protection needs. Mainly, this innovation focuses on protecting crew from exposure to micrometeorites, thermal, solar flares, and galactic cosmic ray (GCR) radiation. The Pressure Shell Approach consists of a micrometeoroid and secondary ejecta protection layer; a thin, composite shell placed in between two layers that is non-structural; an open cavity layer that can be filled with water, regolith, or polyethylene foam; a thicker composite shell that is a structural load bearing that is placed between two layers; and a bladder coating on the interior composite shell. This multi-layer shell creates an effective radiation protection system. Most of its layers can be designed with the materials necessary for specific environments. In situ materials such as water or regolith can be added to the shell design for supplemental radiation protection.

  10. Combination of external loads

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, S.; Tarp Johansen, N.J.; Joergensen, H. [Forskningscenter Risoe, Roskilde (Denmark); Gravesen, H.; Soerensen, S.L. [Carl Bro, Glostrup (Denmark); Pedersen, J. [Elsam Engineering, Fredericia (Denmark); Zorn, R.; Hvidberg Knudsen, M. [DHI Water and Environment, Hoersholm (Denmark); Voelund, P. [Energi E2, Koebenhavn (Denmark)

    2003-09-01

    The project onbectives have been: To improve and consequently opimise the basis for design of offshore wind turbines. This is done through 1) mapping the wind, wave ice and current as well as correlations of these, and 2) by clarifyring how these external conditions transform into loads. A comprehensive effort has been made to get a thorough understanding of the uncertainties that govern the reliability of wind turbines with respect to wind and wave loading. One of the conclusions is that the reliability of wind turbines is generally lower, than the average reliability of building structures that are subject not only to environmental loads, which are very uncertain, but also imposed loads and self weight, which are less uncertain than the environmental loads. The implication is that, at the moment lower load partial safety factors for onshore wind turbines cannot be recommended. For the combination of wind and wave design loads the problem is twofold: 1). A very conservative design will be generated by simply adding the individual wind and wave design loads disregarding the independence of the short-term fluctuations of wind and wave loads. 2). Characteristic values and partial safety factors for wind and wave loads are not defined similarly. This implies that the reliability levels of turbine support structures subject to purely aerodynamic loads and subject to purely hydrodynamic loads are not identical. For the problem of combining aerodynamic design loads and hydrodynamic design loads two results have been obtained in the project: 1). By simple means a site specific wave load safety factor rendering the same safety level for hydrodynamic loads as for aerodynamic loads is derived, and next, by direct square summation of extreme fluctuations, the wind and wave load safety factors are weighted. 2). Under the assumptions that a deep water site is considered and that the wave loading is a fifty-fifty mix of drag and inertia the same wind and wave load safety factor

  11. Multi-methodological investigation of the variability of the microstructure of HPMC hard capsules.

    Science.gov (United States)

    Faulhammer, E; Kovalcik, A; Wahl, V; Markl, D; Stelzer, F; Lawrence, S; Khinast, J G; Paudel, A

    2016-09-25

    The objective of this study was to analyze differences in the subtle microstructure of three different grades of HMPC hard capsule shells using mechanical, spectroscopic, microscopic and tomographic approaches. Dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), vibrational spectroscopic, X-Ray scattering techniques as well as environmental scanning electron microscopy (ESEM) and optical coherence tomography (OCT) were used. Two HPMC capsules manufactured via chemical gelling, one capsule shell manufactured via thermal gelling and one thermally gelled transparent capsule were included. Characteristic micro-structural alterations (associated manufacturing processes) such as mechanical and physical properties relevant to capsule performance and processability were thoroughly elucidated with the integration of data obtained from multi-methodological investigations. The physico-chemical and physico-mechanical data obtained from a gamut of techniques implied that thermally gelled HPMC hard capsule shells could offer an advantage in terms of machinability during capsule filling, owing to their superior micro- and macroscopic structure as well as specifically the mechanical stability under dry or humid conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Recent developments in anisotropic heterogeneous shell theory

    CERN Document Server

    Grigorenko, Alexander Ya; Grigorenko, Yaroslav M; Vlaikov, Georgii G

    2016-01-01

    This volume focuses on the relevant general theory and presents some first applications, namely those based on classical shell theory. After a brief introduction, during which the history and state-of-the-art are discussed, the first chapter presents the mechanics of anisotropic heterogeneous shells, covering all relevant assumptions and the basic relations of 3D elasticity, classical and refined shell models. The second chapter examines the numerical techniques that are used, namely discrete orthogonalization, spline-collocation and Fourier series, while the third highlights applications based on classical theory, in particular, the stress-strain state of shallow shells, non-circular shells, shells of revolution, and free vibrations of conical shells. The book concludes with a summary and an outlook bridging the gap to the second volume.

  13. Turbine blade with spar and shell

    Science.gov (United States)

    Davies, Daniel O [Palm City, FL; Peterson, Ross H [Loxahatchee, FL

    2012-04-24

    A turbine blade with a spar and shell construction in which the spar and the shell are both secured within two platform halves. The spar and the shell each include outward extending ledges on the bottom ends that fit within grooves formed on the inner sides of the platform halves to secure the spar and the shell against radial movement when the two platform halves are joined. The shell is also secured to the spar by hooks extending from the shell that slide into grooves formed on the outer surface of the spar. The hooks form a serpentine flow cooling passage between the shell and the spar. The spar includes cooling holes on the lower end in the leading edge region to discharge cooling air supplied through the platform root and into the leading edge cooling channel.

  14. Indentation of Ellipsoidal and Cylindrical Elastic Shells

    KAUST Repository

    Vella, Dominic

    2012-10-01

    Thin shells are found in nature at scales ranging from viruses to hens\\' eggs; the stiffness of such shells is essential for their function. We present the results of numerical simulations and theoretical analyses for the indentation of ellipsoidal and cylindrical elastic shells, considering both pressurized and unpressurized shells. We provide a theoretical foundation for the experimental findings of Lazarus etal. [following paper, Phys. Rev. Lett. 109, 144301 (2012)PRLTAO0031-9007] and for previous work inferring the turgor pressure of bacteria from measurements of their indentation stiffness; we also identify a new regime at large indentation. We show that the indentation stiffness of convex shells is dominated by either the mean or Gaussian curvature of the shell depending on the pressurization and indentation depth. Our results reveal how geometry rules the rigidity of shells. © 2012 American Physical Society.

  15. Estimation of calcified tissues hardness via calcium and magnesium ionic to atomic line intensity ratio in laser induced breakdown spectra

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Salam, Z.A.; Galmed, A.H. [National Institute of Laser Enhanced Science (NILES), Cairo University, Giza (Egypt); Tognoni, E. [Applied Laser Spectroscopy Laboratory, IPCF/CNR, Pisa (Italy); Harith, M.A. [National Institute of Laser Enhanced Science (NILES), Cairo University, Giza (Egypt)], E-mail: mharithm@niles.edu.eg

    2007-12-15

    Calcified tissues representing three different matrices, namely enamel of human teeth, shells and eggshell, have been studied via Laser Induced Breakdown Spectroscopy (LIBS) technique. The experimental CaII/CaI and MgII/MgI ratios have been measured, in view of the expected correlation between the extent of ionization caused by the laser induced shock wave (SW) and the hardness of the target. The ratio CaII/CaI between the ionic calcium line at 373.69 nm and the neutral line at 428.9 nm is obtained for enamel, shells and eggshell spectra, as well as the ratio MgII/MgI between the ionic magnesium line at 280.26 nm and the neutral line at 285.22 nm. The results show that such spectral lines intensities ratio differs for different matrices and is indeed related to the target materials hardness. It is also found that the MgII/MgI ratio is preferable as an indicator of hardness since these lines are less affected by self absorption. The SW front speed has been measured in the three cases and the obtained values confirm the proportionality to the target hardness. The results here obtained suggest the feasibility of the quantitative estimation of hardness for any other calcified tissues.

  16. Synthesis of TiO{sub 2} core/RuO{sub 2} shell particles using multistep ultrasonic spray pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Stopic, Srecko, E-mail: sstopic@ime-aachen.de [IME – Process Metallurgy and Metal Recycling, RWTH Aachen University, Intzestr. 3, D-52056 Aachen (Germany); Friedrich, Bernd [IME – Process Metallurgy and Metal Recycling, RWTH Aachen University, Intzestr. 3, D-52056 Aachen (Germany); Schroeder, Michael [IPC – Institute of Physical Chemistry, RWTH Aachen University, Landoltweg 2, D-52074 Aachen (Germany); Weirich, Thomas E. [GFE – Central Facility for Electron Microscopy, RWTH Aachen University, Ahornstr. 55, D-52074 Aachen (Germany); AIXTAL – Institute of Crystallography, RWTH Aachen University, Jägerstraße 17–19, D-52066 Aachen (Germany)

    2013-09-01

    Graphical abstract: - Highlights: • TiO{sub 2} core/RuO{sub 2} shell submicron-particles were prepared via a sequential spray pyrolysis. • Spherical particles have the mean particle diameters between 200 and 400 nm. • This method is promising for synthesis of core–shell and core–multishell materials. - Abstract: Spherical submicron-particles with TiO{sub 2} core–RuO{sub 2} shell structure have been synthesized by employing sequential ultrasonic spray pyrolysis. The particles have been investigated by X-ray powder diffraction, scanning electron microscopy and different transmission electron microscopy techniques. The quality of the core–shell structure of the particles has been confirmed by comparison of the experimental data with those generated on the basis of a hard sphere core–shell model. It has been found that the mixing of the Ru-containing aerosol with the TiO{sub 2} particle stream has a significant impact on the core–shell formation. The method introduced in this study can probably be applied for preparation of core–shell and core–multishell materials that are difficult to synthesize in a single step spray pyrolysis process.

  17. Self propagating high temperature synthesis of metal oxides. Reactions in external magnetic fields

    CERN Document Server

    Aguas, M D

    2001-01-01

    The preparation of metal oxides by Self-Propagating High-Temperature Synthesis is reported. The reactions are started with a point source of ignition; typically a hot wire. A synthesis wave is observed moving out from the point source and reactions terminate in seconds. Products obtained can be classified into ferrites (magnetic applications) and stannates (gas sensing applications). Ferrites were synthesised under variable external magnetic fields. The synthesis wave is hotter in the presence of an external magnetic field for hard ferrite synthesis. For spinel ferrites the opposite was observed. Materials synthesised in the field show differences in their bulk magnetic properties (coercivity and saturation magnetisation), structures and microstructures. Combustion reactions in large fields revealed changes in unit cell volume (shrinkage was observed for hard ferrites while expansion was observed for spinel ferrites). SHS synthesised hard ferrites show two distinct components; one has large grain structure co...

  18. Hard rock, heavy metal, metal

    OpenAIRE

    Hein, Fabien

    2011-01-01

    Le terme générique metal désigne une multitude de genres et de sous-genres musicaux issus de l’appariement du hard rock et du heavy metal. Il résulte d’une agrégation sémantique consécutive de l’érosion et de l’interpénétration de ces termes au cours des années 1980. Leurs modèles canoniques, respectivement représentés par les groupes Led Zeppelin et Black Sabbath, se sont progressivement dilués sous l’effet d’une filiation particulièrement effervescente et féconde : black, thrash, doom, prog...

  19. Probing Strangeness in Hard Processes

    CERN Document Server

    Avakian, H; Cisbani, E; Contalbrigo, M; D'Alesio, U; De Leo, R; Devita, R; Di Nezza, P; Hasch, D; Mirazita, M; Osipenko, M; Pappalardo, L; Rossi, P

    2012-01-01

    Since the discovery of strangeness almost five decades ago, interest in this degree of freedom has grown up and now its investigation spans the scales from quarks to nuclei. Measurements with identified strange hadrons can provide important information on several hot topics in hadronic physics: the strange distribution and fragmentation functions, the nucleon tomography and quark orbital momentum, accessible through the study of the {\\it generalized} parton distribution and the {\\it transverse momentum dependent} parton distribution functions, the quark hadronization in the nuclear medium, the hadron spectroscopy and the search for exotic mesons. The CLAS12 large acceptance spectrometer in Hall B at the Jefferson Laboratory upgraded with a RICH detector together with the 12 GeV CEBAF high intensity, high polarized electron beam can open new possibilities to study strangeness in hard processes allowing breakthroughs in all those areas. This paper summarizes the physics case for a RICH detector for CLAS12. Many...

  20. A hard case for modeling

    Directory of Open Access Journals (Sweden)

    George Marsh

    2002-10-01

    Some fighter pilots alive today owe their survival to tough, low-weight helmets whose qualities have been refined as a result of biomechanical modeling. Porter and his colleagues have modeled the human head as a mechanical arrangement of a heavy ball on a rod support, as a system of soft matter contained in a hard case, as an arrangement of meso-scale sub-systems, and as a combination of material systems built up from the nano-molecular and atomic scales. An extensive modeling hierarchy (Fig. 1 is held on nothing more esoteric than a networked workstation and server architecture. Nevertheless, thanks to a process of focused simplification at each hierarchical level, it is able to predict the mechanical behavior of the human head and its constituents in reacting to impacts with considerable accuracy.

  1. Schwannoma of the hard palate.

    Science.gov (United States)

    Isildak, Huseyin; Yilmaz, Mehmet; Ibrahimov, Metin; Aslan, Mehmet; Karaman, Emin; Enver, Ozgun

    2010-01-01

    About half of all neurogenic tumors are seen in the head and neck region. The types of neurogenic tumors must be distinguished. Schwannomas originate from Schwann cells of the neural sheath and are solitary, well-encapsulated, slow-growing adjacent to the parental nerve but extrinsic to the nerve fascicles.Approximately 25% to 45% of all schwannomas are seen in the head and neck region and are found rarely in the oral cavity. Most of the intraoral schwannomas are located in the tongue. Other less common locations are the buccal mucosa, palate, base of the mouth, gingiva, and lips.In this study, we report a rare case of schwannoma of the hard palate, which was excised intraorally.

  2. Shell Evolutions and Nuclear Forces

    CERN Document Server

    Sorlin, O

    2014-01-01

    During the last 30 years, and more specifically during the last 10 years, many experiments have been carried out worldwide using different techniques to study the shell evolution of nuclei far from stability. What seemed not conceivable some decades ago became rather common: all known magic numbers that are present in the valley of stability disappear far from stability and are replaced by new ones at the drip line. By gathering selected experimental results, beautifully consistent pictures emerge, that very likely take root in the properties of the nuclear forces.The present manuscript describes some of these discoveries and proposes an intuitive understanding of these shell evolutions derived from observations. Extrapolations to yet unstudied regions, as where the explosive r-process nucleosynthesis occurs, are proposed. Some remaining challenges and puzzling questions are also addressed.

  3. Glass shell manufacturing in space

    Science.gov (United States)

    Nolen, R. L.; Downs, R. L.; Ebner, M. A.

    1982-01-01

    Highly-uniform, hollow glass spheres, which are used for inertial-confinement fusion targets, are formed from metal-organic gel powder feedstock in a drop-tower furnace. The modelling of this gel-to-sphere transformation has consisted of three phases: gel thermochemistry, furnance-to-gel heat transfer, and gravity-driven degradation of the concentricity of the molten shell. The heat transfer from the furnace to the free-falling gel particle was modelled with forced convection. The gel mass, dimensions, and specific heat as well as furnace temperature profile and furnace gas conductivity, were controlled variables. This model has been experimentally verified. In the third phase, a mathematical model was developed to describe the gravity-driven degradation of concentricity in molten glass shells.

  4. Deformed two center shell model

    CERN Document Server

    Gherghescu, R A

    2003-01-01

    A highly specialized two-center shell model has been developed accounting for the splitting of a deformed parent nucleus into two ellipsoidaly deformed fragments. The potential is based on deformed oscillator wells in direct correspondance with the shape change of the nuclear system. For the first time a potential responsible for the necking part between the fragments is introduced on potential theory basis. As a direct consequence, spin-orbit {\\bf ls} and {\\bf l$^2$} operators are calculated as shape dependent. Level scheme evolution along the fission path for pairs of ellipsoidaly deformed fragments is calculated. The Strutinsky method yields the shell corrections for different mass asymmetries from the superheavy nucleus $^{306}$122 and $^{252}$Cf all along the splitting process.

  5. The shell coal gasification process

    Energy Technology Data Exchange (ETDEWEB)

    Koenders, L.O.M.; Zuideveld, P.O. [Shell Internationale Petroleum Maatschappij B.V., The Hague (Netherlands)

    1995-12-01

    Future Integrated Coal Gasification Combined Cycle (ICGCC) power plants will have superior environmental performance and efficiency. The Shell Coal Gasification Process (SCGP) is a clean coal technology, which can convert a wide range of coals into clean syngas for high efficiency electricity generation in an ICGCC plant. SCGP flexibility has been demonstrated for high-rank bituminous coals to low rank lignites and petroleum coke, and the process is well suited for combined cycle power generation, resulting in efficiencies of 42 to 46% (LHV), depending on choice of coal and gas turbine efficiency. In the Netherlands, a 250 MWe coal gasification combined cycle plant based on Shell technology has been built by Demkolec, a development partnership of the Dutch Electricity Generating Board (N.V. Sep). The construction of the unit was completed end 1993 and is now followed by start-up and a 3 year demonstration period, after that the plant will be part of the Dutch electricity generating system.

  6. External costs related to power production technologies. ExternE national implementation for Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Schleisner, L.; Sieverts Nielsen, P. [eds.

    1997-12-01

    The objective of the ExternE National Implementation project has been to establish a comprehensive and comparable set of data on externalities of power generation for all EU member states and Norway. The tasks include the application of the ExternE methodology to the most important fuel cycles for each country as well as to update the already existing results, to aggregate these site- and technology-specific results to more general figures. The current report covers the detailed information concerning the ExternE methodology. Importance is attached to the computer system used in the project and the assessment of air pollution effects on health, materials and ecological effects. Also the assessment of global warming damages are described. Finally the report covers the detailed information concerning the national implementation for Denmark for an offshore wind farm and a wind farm on land, a decentralised CHP plant based on natural gas and a decentralised CHP plant base on biogas. (au) EU-JOULE 3. 79 tabs., 11 ills., 201 refs.

  7. Externality and burnout among dentists.

    Science.gov (United States)

    St-Yves, A; Freeston, M H; Godbout, F; Poulin, L; St-Amand, C; Verret, M

    1989-12-01

    This study investigates the relationship between burnout as measured by the Maslach Burnout Inventory and locus of control as measured by the Adult Nowicki-Strickland Internal-External Locus of Control (ANS-IE) for 82 dentists. Significant Pearson correlations between two Maslach subscales and locus of control show Personal Accomplishment to be negatively associated -.31 and Emotional Exhaustion to be positively correlated .21 to externality.

  8. Relatie interne en externe audit

    OpenAIRE

    Ghys, Emelie

    2011-01-01

    In het eerste hoofdstuk wordt de probleemstelling van deze eindverhandeling besproken. Interne en externe audit worden de laatste jaren internationaal en nationaal meer en meer erkend in het bedrijfsleven. Aanleiding voor de toenemende belangstelling van de interne en externe auditfunctie zijn de verschillende boekhoudschandalen rond corporate governance of deugdelijk bestuur. Deze financiële mislukkingen leidden wereldwijd tot diverse wetten, nieuwe regels en verbeterde standaarden om zo een...

  9. Performance Targets and External Benchmarking

    DEFF Research Database (Denmark)

    Friis, Ivar; Hansen, Allan; Vámosi, Tamás S.

    as a market mechanism that can be brought inside the firm to provide incentives for continuous improvement and the development of competitive advances. However, whereas extant research primarily has focused on the importance and effects of using external benchmarks, less attention has been directed towards...... towards the conditions for the use of the external benchmarks we provide more insights to some of the issues and challenges that are related to using this mechanism for performance management and advance competitiveness in organizations....

  10. Parallel External Memory Graph Algorithms

    DEFF Research Database (Denmark)

    Arge, Lars Allan; Goodrich, Michael T.; Sitchinava, Nodari

    2010-01-01

    In this paper, we study parallel I/O efficient graph algorithms in the Parallel External Memory (PEM) model, one o f the private-cache chip multiprocessor (CMP) models. We study the fundamental problem of list ranking which leads to efficient solutions to problems on trees, such as computing lowest...... an optimal speedup of ¿(P) in parallel I/O complexity and parallel computation time, compared to the single-processor external memory counterparts....

  11. Stochastic Analysis of Cylindrical Shell

    Directory of Open Access Journals (Sweden)

    Grzywiński Maksym

    2014-06-01

    Full Text Available The paper deals with some chosen aspects of stochastic structural analysis and its application in the engineering practice. The main aim of the study is to apply the generalized stochastic perturbation techniques based on classical Taylor expansion with a single random variable for solution of stochastic problems in structural mechanics. The study is illustrated by numerical results concerning an industrial thin shell structure modeled as a 3-D structure.

  12. Rovibrationally Inelastic Atom-Molecule Collision Cross Sections from a Hard Sphere Model

    Science.gov (United States)

    Lashner, Jacob; Stewart, Brian

    2016-05-01

    Hard-shell models have long been used to elucidate the principal features of molecular energy transfer and exchange reaction in the A + BC system. Nevertheless, no three-dimensional hard-shell calculation of inelastic collision cross sections has been reported. This work aims to fill that void. A particular motivation comes from our experimental results, which show the importance of equatorial impacts in the vibrational excitation process. Working with the simple hard-sphere model, we incorporated secondary impacts, defined as those in which A strikes C after striking B. Such collisions are important in systems such as Li2 - X, in which vibrational energy transfer occurs principally through side impacts. We discuss the complexity this adds to the model and present fully three-dimensional cross sections for rovibrational excitation of an initially stationary molecule in the homonuclear A + B2 system, examining the cross section as a function of the masses and radii of the atoms. We show how the features in the cross section evolve as these parameters are varied and calculate the contribution of secondary (near-equatorial) impacts to the dynamics. We compare with recent measurements in our laboratory and with the results of quasiclassical trajectories.

  13. Asymptotic safety goes on shell

    CERN Document Server

    Benedetti, Dario

    2011-01-01

    It is well known in quantum field theory that the off-shell effective action depends on the gauge choice and field parametrization used in calculating it. Nevertheless, the typical scheme in which the scenario of asymptotically safe gravity is investigated is an off-shell version of the functional renormalization group equation. Working with the Einstein-Hilbert truncation as a test bed, we develop a new scheme for the analysis of asymptotically safe gravity in which the on-shell part of the effective action is singled out and we show that the beta function for the essential coupling has no explicit gauge-dependence. In order to reach our goal, we introduce several technical novelties, including a different decomposition of the metric fluctuations, a new implementation of the ghost sector, and a new cut-off scheme. We find a non-trivial fixed point, with a value of the cosmological constant which is independent of the gauge-fixing parameters.

  14. Antipyretic, wound healing and antimicrobial activity of processed shell of the marine mollusc Cypraea moneta

    Institute of Scientific and Technical Information of China (English)

    Grasian Immanuel; Berkmans Jude Thaddaeus; Muthusamy Usha; Ramasamy Ramasubburayan; Santhiyagu Prakash; Arunachalam Palavesam

    2012-01-01

    Objective: Some of the products derived from marine organisms have been recommended in alternative system of medicine especially Siddha medicine for several treatments. Among the marine molluscs, Cypraea moneta shell has been used as siddha medicine from ancient days. But no systematic study has been done on its efficacy as antipyretic, wound healing and as antimicrobial agent. In the present study, the protective action of processed shell powder of C. moneta was evaluated by us in an animal model for the above treatments. Methods: C. moneta shell powder was prepared by standard method described in Siddha medicine. Then the antipyretic, wound healing as well as antimicrobial effect of the processed powder was tested in Wister albino rats. Results: By the intravenous injection of yeast cell suspension into albino rats, the antipyretic effect of the shell powder given orally was studied by various concentrations of 0, 10, 20 and 30 mg/ml. The body temperature of the albino rat became normal within a short duration (3h). The wound healing effect of the shell powder was very effective. In the thigh region 2 cm wound was made and the different dosages of shell powder (C -Control, SD - Single dose, DD -Double dosage and TD -Triple dose/day) were applied externally as ointment. The scar was produced in eighth day onwards in DD and TD. Antimicrobial activity was studied in three different oppurtunistic human pathogens such as Micrococcus sp., Proteus vulgaris andSalmonella abory in different concentrations (2, 3, 4 and 5% w/v) of C. moneta shell powder extract. Among these, Proteus vulgaris showed the maximum zone of inhibition (15mm size) against 5% w/v concentration, followed by Micrococcus sp. (12mm) and S. abory (10mm) against the same concentration. Conclusions: The present observation suggested that, processed C. moneta shell powder can be used as an alternative medicine, and it has antipyretic, wound healing as well as antimicrobial properties.

  15. Theoretical and experimental implementation of vibrational resonance in an array of hard limiters

    Science.gov (United States)

    Ren, Yuhao; Duan, Fabing

    2016-08-01

    We report that the output signal-to-noise ratio (SNR) of a parallel array of hard limiters can be maximized at an optimal high-frequency vibration amplitude, i.e. the vibrational resonance (VR) effect. As the external noise shape parameter varies, the bifurcation mode of maximal SNR gain is found, and the upper limit of SNR gain is discussed. We theoretically demonstrate a tractable realization of an infinite array approached by a finite array of two hard limiters, and design an electronic circuit experiment to verify the feasibility of this effective method. These results indicate the potential applications of vibrational devices to array signal processing.

  16. Character of shell beds flanking Herod Point shoal, southeastern Long Island Sound, New York

    Science.gov (United States)

    Poppe, L.J.; Williams, S.J.; Babb, Ivar G.

    2011-01-01

    High biogenic productivity, strong tidal currents, shoal topography, and short transport distances combine to favor shell-bed formation along the lower flanks of a cape-associated shoal off Herod Point on Long Island, New York. This shell bed has a densely packed, clast-supported fabric composed largely of undegraded surf clam (Spisula solidissima) valves. It is widest along the central part of the western flank of the shoal where topographic gradients are steep and a stronger flood tide results in residual flow. The bed is narrower and thinner toward the landward margins where currents are too weak to transport larger valves and topographic gradients are gentle, limiting bed-load transport mechanisms by which the shells are concentrated. Reconnaissance mapping off Roanoke Point suggests that shell beds are also present at the other cape-associated shoals off northeastern Long Island, where relatively similar geomorphic and oceanographic conditions exist. These shell beds are important to the Long Island Sound ecosystem because they provide complex benthic habitats of rough and hard substrates at the boundary between the muddy basin floor and mobile sand of the shoals. ?? 2011, the Coastal Education & Research Foundation (CERF).

  17. Moderately large vibrations of doubly curved shallow open shells composed of thick layers

    Science.gov (United States)

    Adam, Christoph

    2007-02-01

    This paper addresses nonlinear flexural vibrations of shallow shells composed of three thick layers with different shear flexibility, which are symmetrically arranged with respect to the middle surface. The considered shell structures of polygonal planform are hard hinged simply supported (i.e. all in-plane rotations and the bending moment vanish) with the edges fully restraint against displacements in any direction. The kinematic field equations are formulated by layerwise application of a first-order shear deformation theory. A modification of Berger's theory is employed to model the nonlinear characteristics of the structural response. The continuity of the transverse shear stress across the interfaces is specified according to Hooke's law, and subsequently the equations of motion of this higher order problem can be derived in analogy to a homogeneous single-layer shear deformable shallow shell. Numerical results of rectangular shallow shells in nonlinear steady-state vibration are presented for various ratios of shell rise to thickness, and non-dimensional load amplitude.

  18. Hardware Assisted ROP Detection Mode (HARD Mode)

    Science.gov (United States)

    2013-08-01

    Distribution A. Cleared for public release; unlimited distribution. USAFA-CN-2013-457 Hardware Assisted ROP Detection Mode (HARD Mode) NATHANIEL HART...457 This report, "Hardware Assisted ROP Detection Mode (HARD Mode)" is presented as a competent treatment of the subj ect, worthy of publication. The...Technical 20120810-20121215 Hardware Assisted ROP Detection Mode (HARD Mode) NATHANIEL HART MICHAEL WINSTEAD MARTIN CARLISLE RODNEY LYKINS MICHAEL

  19. Hardness measures and resolution lower bounds

    OpenAIRE

    Beyersdorff, Olaf; Kullmann, Oliver

    2013-01-01

    Various "hardness" measures have been studied for resolution, providing theoretical insight into the proof complexity of resolution and its fragments, as well as explanations for the hardness of instances in SAT solving. In this report we aim at a unified view of a number of hardness measures, including different measures of width, space and size of resolution proofs. We also extend these measures to all clause-sets (possibly satisfiable).

  20. Unified characterisations of resolution hardness measures

    OpenAIRE

    Beyersdorff, O; Kullmann, O.

    2014-01-01

    Various "hardness" measures have been studied for resolution, providing theoretical insight into the proof complexity of resolution and its fragments, as well as explanations for the hardness of instances in SAT solving. In this paper we aim at a unified view of a number of hardness measures, including different measures of width, space and size of resolution proofs. Our main contribution is a unified game-theoretic characterisation of these measures. As consequences we obtain new relations b...

  1. Shock Waves in Dense Hard Disk Fluids

    OpenAIRE

    Sirmas, Nick; Tudorache, Marion; Barahona, Javier; Radulescu, Matei I.

    2011-01-01

    Media composed of colliding hard disks (2D) or hard spheres (3D) serve as good approximations for the collective hydrodynamic description of gases, liquids and granular media. In the present study, the compressible hydrodynamics and shock dynamics are studied for a two-dimensional hard-disk medium at both the continuum and discrete particle level descriptions. For the continuum description, closed form analytical expressions for the inviscid hydrodynamic description, shock Hugoniot, isentropi...

  2. A Forging Hardness Dispersion Effect on the Energy Consumption of Machining

    Directory of Open Access Journals (Sweden)

    L. D. Mal'kova

    2015-01-01

    Full Text Available The aim of the work is to evaluate a hardness dispersion of forgings to be further machined, and analyse the impact of this dispersion on the resulting power consumption when cutting.The paper studies the hardness values of three kinds of parts for automotive manufacturing. Sample of each part was n = 100 pieces. Analysis of measurements showed that 46% - 93% of parts meet requirements for a range defined by the work-piece working drawing. It was found that hardness of one batch of forgings is under dispersion, which distribution is governed by the normal law.The work provides calculations for machining the external cylindrical surfaces of the considered parts. In the context of calculating are adopted parameters of the enterprise-processing rate. It is found that power consumption of machining because of the dispersion values of the work-piece hardness is a function of the random BH variable and it itself is a random variable. Two types of samples are considered, namely: the full sample and that of the values that meet requirements for hardness. The coefficient of variation for samples that meet the technical requirements for hardness is lower than for the full samples, so their average value is more reliable characteristic of a set. It was also found that to ensure a reliable prediction of power consumption in designing the manufacturing processes it is necessary to reduce a tolerance range of workpiece hardness to the limit.The work gives a comparative evaluation of electric power consumption per unit cylindrical surface of the parts under consideration. A relative change in the electric power consumed at the minimum and maximum levels of the hardness value was introduced as an evaluation criterion. It is found that with changing hardness of machined work-pieces within the tolerance, the change in power consumption in machining the unit surface reaches 16% while in the case its being out of the specified range it does 47%.

  3. External Costs Related to Power Production Technologies

    DEFF Research Database (Denmark)

    Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

    1997-01-01

    The European Commission has launched a major study project, ExternE, to develop a methodology to quantify externalities. A “National Implementation Phase”, was started under the Joule II programme with the purpose of implementing the ExternE methodology in all member states. The main objective...

  4. External Costs Related to Power Production Technologies

    DEFF Research Database (Denmark)

    Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

    1997-01-01

    The European Commission has launched a major study project, ExternE, to develop a methodology to quantify externalities. A “National Implementation Phase”, was started under the Joule II programme with the purpose of implementing the ExternE methodology in all member states. The main objective of...

  5. Core-shell structured titanium-nitrogen alloys with high strength, high thermal stability and good plasticity.

    Science.gov (United States)

    Zhang, Y S; Zhao, Y H; Zhang, W; Lu, J W; Hu, J J; Huo, W T; Zhang, P X

    2017-01-06

    Multifunctional materials with more than two good properties are widely required in modern industries. However, some properties are often trade-off with each other by single microstructural designation. For example, nanostructured materials have high strength, but low ductility and thermal stability. Here by means of spark plasma sintering (SPS) of nitrided Ti particles, we synthesized bulk core-shell structured Ti alloys with isolated soft coarse-grained Ti cores and hard Ti-N solid solution shells. The core-shell Ti alloys exhibit a high yield strength (~1.4 GPa) comparable to that of nanostructured states and high thermal stability (over 1100 °C, 0.71 of melting temperature), contributed by the hard Ti-N shells, as well as a good plasticity (fracture plasticity of 12%) due to the soft Ti cores. Our results demonstrate that this core-shell structure offers a design pathway towards an advanced material with enhancing strength-plasticity-thermal stability synergy.

  6. Core-shell structured titanium-nitrogen alloys with high strength, high thermal stability and good plasticity

    Science.gov (United States)

    Zhang, Y. S.; Zhao, Y. H.; Zhang, W.; Lu, J. W.; Hu, J. J.; Huo, W. T.; Zhang, P. X.

    2017-01-01

    Multifunctional materials with more than two good properties are widely required in modern industries. However, some properties are often trade-off with each other by single microstructural designation. For example, nanostructured materials have high strength, but low ductility and thermal stability. Here by means of spark plasma sintering (SPS) of nitrided Ti particles, we synthesized bulk core-shell structured Ti alloys with isolated soft coarse-grained Ti cores and hard Ti-N solid solution shells. The core-shell Ti alloys exhibit a high yield strength (~1.4 GPa) comparable to that of nanostructured states and high thermal stability (over 1100 °C, 0.71 of melting temperature), contributed by the hard Ti-N shells, as well as a good plasticity (fracture plasticity of 12%) due to the soft Ti cores. Our results demonstrate that this core-shell structure offers a design pathway towards an advanced material with enhancing strength-plasticity-thermal stability synergy.

  7. Potential health impacts of hard water

    National Research Council Canada - National Science Library

    Sengupta, Pallav

    2013-01-01

    ... the hardness of the drinking water. In addition, several epidemiological investigations have demonstrated the relation between risk for cardiovascular disease, growth retardation, reproductive failure, and other health problems...

  8. Shape-tunable core-shell microparticles.

    Science.gov (United States)

    Klein, Matthias K; Saenger, Nicolai R; Schuetter, Stefan; Pfleiderer, Patrick; Zumbusch, Andreas

    2014-10-28

    Colloidal polymer particles are an important class of materials finding use in both everyday and basic research applications. Tailoring their composition, shape, and functionality is of key importance. In this article, we describe a new class of shape-tunable core-shell microparticles. They are composed of a cross-linked polystyrene (PS) core and a poly(methyl methacrylate) (PMMA) shell of varying thickness. In the first step, we prepared highly cross-linked PS cores, which are subsequently transferred into a nonpolar dispersant. They serve as the seed dispersion for a nonaqueous dispersion polymerization to generate the PMMA shell. The shape of the particles can subsequently be manipulated. After the shell growth stage, the spherical PS/PMMA core-shell colloids exhibit an uneven and wrinkled surface. An additional tempering procedure allows for smoothing the surface of the core-shell colloids. This results in polymer core-shell particles with a perfectly spherical shape. In addition to this thermal smoothing of the PMMA shell, we generated a selection of shape-anisotropic core-shell particles using a thermomechanical stretching procedure. Because of the unique constitution, we can selectively interrogate molecular vibrations in the PS core or the PMMA shell of the colloids using nonlinear optical microscopy techniques. This is of great interest because no photobleaching occurs, such that the particles can be tracked in real space over long times.

  9. Cell-in-Shell Hybrids: Chemical Nanoencapsulation of Individual Cells.

    Science.gov (United States)

    Park, Ji Hun; Hong, Daewha; Lee, Juno; Choi, Insung S

    2016-05-17

    , bacterial endospores. Bioinspired silicification and phenolics-based coatings are, so far, the main approaches to the formation of cytoprotective cell-in-shell hybrids, because they ensure cell viability during encapsulations and also generate durable nanoshells on cell surfaces. The resulting cell-in-shell hybrids extrinsically possess enhanced resistance to external aggressors, and more intriguingly, the encapsulation alters their metabolic activity, exemplified by retarded or suppressed cell cycle progression. In addition, recent developments in the field have further advanced the synthetic tools available to the stage of chemical sporulation and germination of mammalian cells, where cytoprotective shells are formed on labile mammalian cells and broken apart on demand. For example, individual HeLa cells are coated with a metal-organic complex of ferric ion and tannic acid, and cellular adherence and proliferation are controlled by the programmed shell formation and degradation. Based on these demonstrations, the (degradable) cell-in-shell hybrids are anticipated to find their applications in various biomedical and bionanotechnological areas, such as cytotherapeutics, high-throughput screening, sensors, and biocatalysis, as well as providing a versatile research platform for single-cell biology.

  10. The evaluation of a small capacity shell and tube ammonia evaporator

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Valladares, O.; Hernandez, J.I.; Best y Brown, R. [Centro de Investigacion en Energia de la UNAM, Morelos (Mexico); Gonzalez, J.C. [Universidad Autonoma de Campeche (Mexico). Programa CADETRAA

    2003-12-01

    The use of ammonia as refrigerant is widespread in vapour compression and ammonia/water absorption systems. Ammonia is not actually used in low capacity applications mainly because of the lack of economical available equipment. For this reason, the objective of this study is the numerical and experimental evaluation of a small capacity ammonia shell and tube evaporator with enhanced heat transfer surfaces. An experimental system to evaluate small capacity heat exchangers was developed. A shell and tube evaporator with external low fin tubes was successfully tested. The experimental uncertainty for the evaporator capacity has been estimated within {+-}5.5%. The experimental results were used to validate a heat exchanger numerical tool that predicts reasonably well the cooling capacity and load outlet temperatures. The methodology presented in this work can be applied to evaluate other refrigerants in similar shell and tube evaporators and to optimize the design of an evaporator for a specific application. (author)

  11. Topologically stable magnetization states on a spherical shell: Curvature-stabilized skyrmions

    Science.gov (United States)

    Kravchuk, Volodymyr P.; Rößler, Ulrich K.; Volkov, Oleksii M.; Sheka, Denis D.; van den Brink, Jeroen; Makarov, Denys; Fuchs, Hagen; Fangohr, Hans; Gaididei, Yuri

    2016-10-01

    Topologically stable structures include vortices in a wide variety of matter, skyrmions in ferro- and antiferromagnets, and hedgehog point defects in liquid crystals and ferromagnets. These are characterized by integer-valued topological quantum numbers. In this context, closed surfaces are a prominent subject of study as they form a link between fundamental mathematical theorems and real physical systems. Here we perform an analysis on the topology and stability of equilibrium magnetization states for a thin spherical shell with easy-axis anisotropy in normal directions. Skyrmion solutions are found for a range of parameters. These magnetic skyrmions on a spherical shell have two distinct differences compared to their planar counterpart: (i) they are topologically trivial and (ii) can be stabilized by curvature effects, even when Dzyaloshinskii-Moriya interactions are absent. Due to its specific topological nature a skyrmion on a spherical shell can be simply induced by a uniform external magnetic field.

  12. The detection of Salmonella typhimurium on shell eggs using a phage-based biosensor

    Science.gov (United States)

    Chai, Yating; Li, Suiqiong; Horikawa, Shin; Shen, Wen; Park, Mi-Kyung; Vodyanoy, Vitaly J.; Chin, Bryan A.

    2011-06-01

    This paper presents the direct detection of Salmonella typhimurium on shell eggs using a phage-based magnetoelastic (ME) biosensor. The ME biosensor consists of a ME resonator as the sensor platform and E2 phage as the biorecognition element that is genetically engineered to specifically bind with Salmonella typhimurium. The ME biosensor, which is a wireless sensor, vibrates with a characteristic resonant frequency under an externally applied magnetic field. Multiple sensors can easily be remotely monitored. Multiple measurement and control sensors were placed on the shell eggs contaminated by Salmonella typhimurium solutions with different known concentrations. The resonant frequency of sensors before and after the exposure to the spiked shell eggs was measured. The frequency shift of the measurement sensors was significantly different than the control sensors indicating Salmonella contamination. Scanning electron microscopy was used to confirm binding of Salmonella to the sensor surface and the resulting frequency shift results.

  13. Tunable multiple Fano resonances in magnetic single-layered core-shell particles

    CERN Document Server

    Arruda, Tiago Jose; Pinheiro, Felipe Arruda

    2015-01-01

    We investigate multiple Fano, comblike scattering resonances in single-layered, concentric core-shell nanoparticles composed of magnetic materials. Using the Lorenz-Mie theory, we derive, in the long-wavelength limit, an analytical condition for the occurrence of comblike resonances in the single scattering by coated spheres. This condition establishes that comblike scattering response uniquely depends on material parameters and thickness of the shell, provided that it is magnetic and thin compared to the scatterer radius. We also demonstrate that comblike scattering response shows up beyond the long-wavelength limit and it is robust against absorption. Since multiple Fano resonances are shown to depend explicitly on the magnetic permeability of the shell, we argue that both the position and profile of the comblike, morphology-dependent resonances could be externally tuned by exploiting the properties of engineered magnetic materials.

  14. Three Semi-empirical Analytic Expressions for the Radial Distribution Function of Hard Spheres

    Institute of Scientific and Technical Information of China (English)

    SUN Jiu-Xun; CAI Ling-Cang; WU Qiang; JING Fu-Qian

    2004-01-01

    Three simple analytic expressions satisfying the limitation condition at low densities for the radial distribution function of hard spheres are developed in terms of a polynomial expansion of nonlinear base functions and the Carnahan-Starling equation of state. The simplicity and precision for these expressions are superior to the well-known Percus-Yevick expression. The coefficients contained in these expressions have been determined by fitting the Monte Carlo data for the first coordination shell, and by fitting both the Monte Carlo data and the numerical results of PercusYevick expression for the second coordination shell. One of the expressions has been applied to develop an analytic equation of state for the square-well fluid, and the numerical results are in good agreement with the computer simulation data.

  15. Multi-shell model of ion-induced nucleic acid condensation

    Science.gov (United States)

    Tolokh, Igor S.; Drozdetski, Aleksander V.; Pollack, Lois; Baker, Nathan A.; Onufriev, Alexey V.

    2016-04-01

    We present a semi-quantitative model of condensation of short nucleic acid (NA) duplexes induced by trivalent cobalt(iii) hexammine (CoHex) ions. The model is based on partitioning of bound counterion distribution around single NA duplex into "external" and "internal" ion binding shells distinguished by the proximity to duplex helical axis. In the aggregated phase the shells overlap, which leads to significantly increased attraction of CoHex ions in these overlaps with the neighboring duplexes. The duplex aggregation free energy is decomposed into attractive and repulsive components in such a way that they can be represented by simple analytical expressions with parameters derived from molecular dynamic simulations and numerical solutions of Poisson equation. The attractive term depends on the fractions of bound ions in the overlapping shells and affinity of CoHex to the "external" shell of nearly neutralized duplex. The repulsive components of the free energy are duplex configurational entropy loss upon the aggregation and the electrostatic repulsion of the duplexes that remains after neutralization by bound CoHex ions. The estimates of the aggregation free energy are consistent with the experimental range of NA duplex condensation propensities, including the unusually poor condensation of RNA structures and subtle sequence effects upon DNA condensation. The model predicts that, in contrast to DNA, RNA duplexes may condense into tighter packed aggregates with a higher degree of duplex neutralization. An appreciable CoHex mediated RNA-RNA attraction requires closer inter-duplex separation to engage CoHex ions (bound mostly in the "internal" shell of RNA) into short-range attractive interactions. The model also predicts that longer NA fragments will condense more readily than shorter ones. The ability of this model to explain experimentally observed trends in NA condensation lends support to proposed NA condensation picture based on the multivalent "ion binding

  16. Evaluation of the Biological Effects of Externally Tunable, Hydrogel Encapsulated Quantum Dot Nanospheres in Escherichia coli

    Directory of Open Access Journals (Sweden)

    Somesree GhoshMitra

    2011-08-01

    Full Text Available Quantum Dots (QDs have become an interesting subject of study for labeling and drug delivery in biomedical research due to their unique responses to external stimuli. In this paper, the biological effects of a novel hydrogel based QD nano-structure on E. coli bacteria are presented. The experimental evidence reveals that cadmium telluride (CdTe QDs that are encapsulated inside biocompatible polymeric shells have reduced or negligible toxicity to this model cell system, even when exposed at higher dosages. Furthermore, a preliminary gene expression study indicates that QD-hydrogel nanospheres do not inhibit the Green Fluorescent Protein (GFP gene expression. As the biocompatible and externally tunable polymer shells possess the capability to control the QD packing density at nanometer scales, the resulting luminescence efficiency of the nanostructures, besides reducing the cytotoxic potential, may be suitable for various biomedical applications.

  17. Adsorption Studies of Coconut Shell Carbons Prepared by KOH Activation for Removal of Lead(II From Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Chengwen Song

    2013-12-01

    Full Text Available Removal of Pb2+ from aqueous solutions using coconut shell carbons produced by KOH activation is performed in this paper. Morphology and pore structure characteristic of coconut shell carbons are analyzed by SEM and nitrogen adsorption techniques. Effects of adsorbent concentration, agitation time and initial ion concentration on the adsorption behavior are investigated, and adsorption isotherm and kinetics on coconut shell carbons are also studied. The results show that high weight ratio of KOH/sample is favorable to produce rich porous structure. The resultant coconut shell carbons with a high specific surface area of 1135 m2/g is obtained and demonstrates good adsorption potential on removal of Pb2+ from aqueous solutions. Adsorption data fit well with Freundlich and Halsey isotherms. The kinetic studies indicate that adsorption behavior can be described by pseudo-second-order kinetic model, which also follows external diffusion and intra-particle diffusion in the adsorption process.

  18. Mussel Shell Impaction in the Esophagus

    Directory of Open Access Journals (Sweden)

    Sunmin Kim

    2013-03-01

    Full Text Available Mussels are commonly used in cooking around the world. The mussel shell breaks more easily than other shells, and the edge of the broken mussel shell is sharp. Impaction can ultimately cause erosion, perforation and fistula. Aside from these complications, the pain can be very intense. Therefore, it is essential to verify and remove the shell as soon as possible. In this report we describe the process of diagnosing and treating mussel shell impaction in the esophagus. Physicians can overlook this unusual foreign body impaction due to lack of experience. When physicians encounter a patient with severe chest pain after a meal with mussels, mussel shell impaction should be considered when diagnosing and treating the patient.

  19. Flow past a porous approximate spherical shell

    Science.gov (United States)

    Srinivasacharya, D.

    2007-07-01

    In this paper, the creeping flow of an incompressible viscous liquid past a porous approximate spherical shell is considered. The flow in the free fluid region outside the shell and in the cavity region of the shell is governed by the Navier Stokes equation. The flow within the porous annulus region of the shell is governed by Darcy’s Law. The boundary conditions used at the interface are continuity of the normal velocity, continuity of the pressure and Beavers and Joseph slip condition. An exact solution for the problem is obtained. An expression for the drag on the porous approximate spherical shell is obtained. The drag experienced by the shell is evaluated numerically for several values of the parameters governing the flow.

  20. Hard disks with SCSI interface

    CERN Document Server

    Denisov, O Yu

    1999-01-01

    The testing of 20 models of hard SCSI-disks is carried out: the Fujitsu MAE3091LP; the IBM DDRS-39130, DGHS-318220, DNES-318350, DRHS-36V and DRVS-18V; the Quantum Atlas VI 18.2; the Viking 11 9.1; the Seagate ST118202LW, ST118273LW, ST118273W, ST318203LW, ST318275LW, ST34520W, ST39140LW and ST39173W; and the Western Digital WDE9100-0007, WDE9100-AV0016, WDE9100-AV0030 and WDE9180-0048. All tests ran under the Windows NT 4.0 workstation operating system with Service Pack 4, under video mode with 1024*768 pixel resolution, 32- bit colour depth and V-frequency equal to 85 Hz. The detailed description and characteristics of SCSI stores are presented. Test results (ZD Winstone 99 and ZD WinBench 99 tests) are given in both table and diagram (disk transfer rate) forms. (0 refs).

  1. Ancient shell industry at Bet Dwarka island

    Digital Repository Service at National Institute of Oceanography (India)

    Gaur, A.S.; Sundaresh; Patankar, V.

    for the manufacture of beads, bangles, etc. 12 . Shell species found at the sites include T. pyrum (cha nk), Chicoreus ramosus , Fasciolaria trapezium , Cypraea (cowries), Arabica arabica (cowries), Babylonia spirata , dentalium, mussel and Arca... muscles are attached. Average length of a shell can be up to 15 to 20 cm and width 10 ? 15 cm 8 . It provides a unique structure for the manufacture of several bangles from a single shell. The organ ism living inside is also edible...

  2. On growth and form of irregular coiled-shell of a terrestrial snail: Plectostoma concinnum (Fulton, 1901 (Mollusca: Caenogastropoda: Diplommatinidae

    Directory of Open Access Journals (Sweden)

    Thor-Seng Liew

    2014-05-01

    Full Text Available The molluscan shell can be viewed as a petrified representation of the organism’s ontogeny and thus can be used as a record of changes in form during growth. However, little empirical data is available on the actual growth and form of shells, as these are hard to quantify and examine simultaneously. To address these issues, we studied the growth and form of a land snail that has an irregularly coiled and heavily ornamented shell–Plectostoma concinnum. The growth data were collected in a natural growth experiment and the actual form changes of the aperture during shell ontogeny were quantified. We used an ontogeny axis that allows data of growth and form to be analysed simultaneously. Then, we examined the association between the growth and the form during three different whorl growing phases, namely, the regular coiled spire phase, the transitional constriction phase, and the distortedly-coiled tuba phase. In addition, we also explored the association between growth rate and the switching between whorl growing mode and rib growing mode. As a result, we show how the changes in the aperture ontogeny profiles in terms of aperture shape, size and growth trajectory, and the changes in growth rates, are associated with the different shell forms at different parts of the shell ontogeny. These associations suggest plausible constraints that underlie the three different shell ontogeny phases and the two different growth modes. We found that the mechanism behind the irregularly coiled-shell is the rotational changes of the animal’s body and mantle edge with respect to the previously secreted shell. Overall, we propose that future study should focus on the role of the mantle and the columellar muscular system in the determination of shell form.

  3. ERRATUM: Work smart, wear your hard hat

    CERN Multimedia

    2003-01-01

    An error appeared in the article «Work smart, wear your hard hat» published in Weekly Bulletin 27/2003, page 5. The impact which pierced a hole in the hard hat worn by Gerd Fetchenhauer was the equivalent of a box weighing 5 kg and not 50 kg.

  4. Retraction of Hard, Lozano, and Tversky (2006)

    Science.gov (United States)

    Hard, B. M.; Lozano, S. C.; Tversky, B.

    2008-01-01

    Reports a retraction of "Hierarchical encoding of behavior: Translating perception into action" by Bridgette Martin Hard, Sandra C. Lozano and Barbara Tversky (Journal of Experimental Psychology: General, 2006[Nov], Vol 135[4], 588-608). All authors retract this article. Co-author Tversky and co-author Hard believe that the research results cannot…

  5. Hard Spring Wheat Technical Committee 2016 Crop

    Science.gov (United States)

    Seven experimental lines of hard spring wheat were grown at up to five locations in 2016 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Spri...

  6. Numerical Solution of Hard-Core Mixtures

    OpenAIRE

    Buhot, Arnaud; Krauth, Werner

    1997-01-01

    We study the equilibrium phase diagram of binary mixtures of hard spheres as well as of parallel hard cubes. A superior cluster algorithm allows us to establish and to access the demixed phase for both systems and to investigate the subtle interplay between short-range depletion and long-range demixing.

  7. Nonlinear equations of ribbed shells motion taking into account the different properties of the material. II

    OpenAIRE

    2010-01-01

    It is known that in the process of deformation of shells depending on the level and duration of external influences may appear different properties of the material of construction: elasticity, plasticity, creep, etc. The manifestation of plasticity or creep leads to irreversible consequences. To design is an obviously strong and stable construction, it is necessary to exclude the possibility of manifestation of these properties.That is why urgent and important tasks are the development of bet...

  8. Thermodynamic cost of external control

    Science.gov (United States)

    Barato, Andre C.; Seifert, Udo

    2017-07-01

    Artificial molecular machines are often driven by the periodic variation of an external parameter. This external control exerts work on the system of which a part can be extracted as output if the system runs against an applied load. Usually, the thermodynamic cost of the process that generates the external control is ignored. Here, we derive a refined second law for such small machines that include this cost, which is, for example, generated by free energy consumption of a chemical reaction that modifies the energy landscape for such a machine. In the limit of irreversible control, this refined second law becomes the standard one. Beyond this ideal limiting case, our analysis shows that due to a new entropic term unexpected regimes can occur: the control work can be smaller than the extracted work and the work required to generate the control can be smaller than this control work. Our general inequalities are illustrated by a paradigmatic three-state system.

  9. Leveraging External Sources of Innovation

    DEFF Research Database (Denmark)

    West, Joel; Bogers, Marcel

    2014-01-01

    This paper reviews research on open innovation that considers how and why firms commercialize external sources of innovations. It examines both the “outside-in” and “coupled” modes of open innovation. From an analysis of prior research on how firms leverage external sources of innovation...... cited work beyond those journals. A review of 291 open innovation-related publications from these sources shows that the majority of these articles indeed address elements of this inbound open innovation process model. Specifically, it finds that researchers have front-loaded their examination...... external innovations create value rather than how firms capture value from those innovations. Finally, the interaction phase considers both feedback for the linear process and reciprocal innovation processes such as cocreation, network collaboration, and community innovation. This review and synthesis...

  10. External Quantum Efficiency Improvement with Luminescent Downshifting Layers: Experimental and Modelling

    OpenAIRE

    Ahmed, H.; S. J. McCormack; Doran, J.

    2016-01-01

    Core-shell quantum dots CdSe/ZnS and lumogen yellow organic dye are characterized by their inclusion in luminescent downshifting (LDS) layers. Layers were deposited on top of crystalline silicon cell (c-Si), dye synthesized solar cell (DSSC), and cadmium telluride (CdTe) minimodules. External quantum efficiency measurements for the solar cell/LDS devices are discussed. Experimental results were compared with an optical model developed by Rothemund, 2014.

  11. External Quantum Efficiency Improvement with Luminescent Downshifting Layers: Experimental and Modelling

    Directory of Open Access Journals (Sweden)

    H. Ahmed

    2016-01-01

    Full Text Available Core-shell quantum dots CdSe/ZnS and lumogen yellow organic dye are characterized by their inclusion in luminescent downshifting (LDS layers. Layers were deposited on top of crystalline silicon cell (c-Si, dye synthesized solar cell (DSSC, and cadmium telluride (CdTe minimodules. External quantum efficiency measurements for the solar cell/LDS devices are discussed. Experimental results were compared with an optical model developed by Rothemund, 2014.

  12. Hardness methods for testing maize kernels.

    Science.gov (United States)

    Fox, Glen; Manley, Marena

    2009-07-08

    Maize is a highly important crop to many countries around the world, through the sale of the maize crop to domestic processors and subsequent production of maize products and also provides a staple food to subsistance farms in undeveloped countries. In many countries, there have been long-term research efforts to develop a suitable hardness method that could assist the maize industry in improving efficiency in processing as well as possibly providing a quality specification for maize growers, which could attract a premium. This paper focuses specifically on hardness and reviews a number of methodologies as well as important biochemical aspects of maize that contribute to maize hardness used internationally. Numerous foods are produced from maize, and hardness has been described as having an impact on food quality. However, the basis of hardness and measurement of hardness are very general and would apply to any use of maize from any country. From the published literature, it would appear that one of the simpler methods used to measure hardness is a grinding step followed by a sieving step, using multiple sieve sizes. This would allow the range in hardness within a sample as well as average particle size and/or coarse/fine ratio to be calculated. Any of these parameters could easily be used as reference values for the development of near-infrared (NIR) spectroscopy calibrations. The development of precise NIR calibrations will provide an excellent tool for breeders, handlers, and processors to deliver specific cultivars in the case of growers and bulk loads in the case of handlers, thereby ensuring the most efficient use of maize by domestic and international processors. This paper also considers previous research describing the biochemical aspects of maize that have been related to maize hardness. Both starch and protein affect hardness, with most research focusing on the storage proteins (zeins). Both the content and composition of the zein fractions affect

  13. Theoretical Hardness of Wurtzite-Structured Semiconductors

    Institute of Scientific and Technical Information of China (English)

    GUO Xiao-Ju; XU Bo; LIU Zhong-Yuan; YU Dong-Li; HE Ju-Long; GUO Li-Cong

    2008-01-01

    Vickers hardness calculations of eleven wurtzite-structured semiconductors are performed based on the microscopic hardness model All the parameters are obtained from first-principles calculations. There axe two types of chemical bonds in wurtzite-structured crystals. The overlap populations of the two types of chemical bonds in lonsdaleite are chosen as Pc for wurtzite structure. The calculated bond ionicity values of the wurtzite-structured semiconductors are in good agreement with the ionicities from the dielectric definition. When the hardness of wurtzite-structured crystal is higher than 20GPa, our calculated Vickers hardness is within 10% accuracy. Therefore, the hardness of novel wurtzite-structured crystal could be estimated from first-principles calculations.

  14. Design optimization of a torpedo shell structure

    Institute of Scientific and Technical Information of China (English)

    YU De-hai; SONG Bao-wei; LI Jia-wang; YANG Shi-xing

    2008-01-01

    An optimized methodology to design a more robust torpedo shell is proposed. The method has taken into account reliability requirements and controllable and uncontrollable factors such as geometry, load, material properties, manufacturing processes, installation, etc. as well as human and environmental factors. The result is a more realistic shell design. Our reliability optimization design model was developed based on sensitivity analysis. Details of the design model are given in this paper. An example of a torpedo shell design based on this model is given and demonstrates that the method produces designs that are more effective and reliable than traditional torpedo shell designs. This method can be used for other torpedo system designs.

  15. RESONANCE RADIATION OF SUBMERGED INFINITE CYLINDRICAL SHELL

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The resonance sound radiation from submerged infinite elastic cylindrical shell, excited by internal harmonic line force, is investigated. The shell radiation power is presented in terms of resonant modal radiation derived from resonance radiation theory (RRT). The resonance radiation formulae are derived from classical Rayleigh normal mode solution, which are useful for understanding the mechanism of sound radiation from submerged shells. As an example, numerical calculation of a thin steel cylindrical shell is done by using these two methods. It seems that the results of RRT solutions are in good agreement with that of Rayleigh normal mode solutions.

  16. Material with core-shell structure

    Science.gov (United States)

    Luhrs, Claudia; Richard, Monique N.; Dehne, Aaron; Phillips, Jonathan; Stamm, Kimber L.; Fanson, Paul T.

    2011-11-15

    Disclosed is a material having a composite particle, the composite particle including an outer shell and a core. The core is made from a lithium alloying material and the outer shell has an inner volume that is greater in size than the core of the lithium alloying material. In some instances, the outer mean diameter of the outer shell is less than 500 nanometers and the core occupies between 5 and 99% of the inner volume. In addition, the outer shell can have an average wall thickness of less than 100 nanometers.

  17. Use of beamforming for detecting an acoustic source inside a cylindrical shell filled with a heavy fluid

    Science.gov (United States)

    Moriot, J.; Maxit, L.; Guyader, J. L.; Gastaldi, O.; Périsse, J.

    2015-02-01

    The acoustic detection of defects or leaks inside a cylindrical shell containing a fluid is of prime importance in the industry, particularly in the nuclear field. This paper examines the beamforming technique which is used to detect and locate the presence of an acoustic monopole inside a cylindrical elastic shell by measuring the external shell vibrations. In order to study the effect of fluid-structure interactions and the distance of the source from the array of sensors, a vibro-acoustic model of the fluid-loaded shell is first considered for numerical experiments. The beamforming technique is then applied to radial velocities of the shell calculated with the model. Different parameters such as the distance between sensors, the radial position of the source, the damping loss factor of the shell, or of the fluid, and modifications of fluid properties can be considered without difficulty. Analysis of these different results highlight how the behaviour of the fluid-loaded shell influences the detection. Finally, a test in a water-filled steel pipe is achieved for confirming experimentally the interest of the presented approach.

  18. Supramolecular adhesives to hard surfaces: adhesion between host hydrogels and guest glass substrates through molecular recognition.

    Science.gov (United States)

    Takashima, Yoshinori; Sahara, Taiga; Sekine, Tomoko; Kakuta, Takahiro; Nakahata, Masaki; Otsubo, Miyuki; Kobayashi, Yuichiro; Harada, Akira

    2014-10-01

    Supramolecular materials based on host-guest interactions should exhibit high selectivity and external stimuli-responsiveness. Among various stimuli, redox and photo stimuli are useful for its wide application. An external stimuli-responsive adhesive system between CD host-gels (CD gels) and guest molecules modified glass substrates (guest Sub) is focused. Here, the selective adhesion between host gels and guest substrates where adhesion depends on molecular complementarity is reported. Initially, it is thought that adhesion of a gel material onto a hard material might be difficult unless many guest molecules modified linear polymers immobilize on the surface of hard materials. However, reversible adhesion of the CD gels is observed by dissociating and re-forming inclusion complex in response to redox and photo stimuli.

  19. Magnetic properties of hybrid elastomers with magnetically hard fillers: rotation of particles

    Science.gov (United States)

    Stepanov, G. V.; Borin, D. Yu; Bakhtiiarov, A. V.; Storozhenko, P. A.

    2017-03-01

    Hybrid magnetic elastomers belonging to the family of magnetorheological elastomers contain magnetically hard components and are of the utmost interest for the development of semiactive and active damping devices as well as actuators and sensors. The processes of magnetizing of such elastomers are accompanied by structural rearrangements inside the material. When magnetized, the elastomer gains its own magnetic moment resulting in changes of its magneto-mechanical properties, which remain permanent, even in the absence of external magnetic fields. Influenced by the magnetic field, magnetized particles move inside the matrix forming chain-like structures. In addition, the magnetically hard particles can rotate to align their magnetic moments with the new direction of the external field. Such an elastomer cannot be demagnetized by the application of a reverse field.

  20. Experimental study on the buckling and post-buckling behavior of thin-walled cylindrical shells with varying thickness under hydrostatic pressure

    OpenAIRE

    FAKHIM, Y. G.; SHOWKATI, H.; K Abedi

    2009-01-01

    p. 2511-2522 The application of thin-walled cylindrical shells, as the essential structural members, has been known for engineers and functional duty of them is basic necessaries of modern industries. These structures are prone to fail by buckling under external pressure which could be happened during discharging or wind load. Although the buckling capacity of the shells depends principally on two geometric ratios of "length to radius" (L/R) and "radius to thickness" (R/t), but...

  1. Design and Analysis of Orthotrophic Ring-Stiffened Cylindrical Shells Subjected to External Hydrostatic Pressure

    Science.gov (United States)

    2008-03-28

    pressure for interbay buckling, PIB . The sixth, eighth, and 10th columns give the ratio of the test collapse pressure to the respective DAPS4 computed...and Reynolds Tests Model Ptest Mode PA Ptest/PA PGI Ptest/PGI PIB Ptest/ PIB Padjusted BOSOR5 Padjusted/ BOSOR5 1 25-88 9450 A 8750 1.080 10580...C al cu la te d Co rr el at io n Ptest/PA Ptest/PGI Ptest/ PIB Padjusted/BOSOR5 No Fillets With Fillets Te st /C al cu la te d Co rr el at io n

  2. Depletion potential in hard-sphere mixtures: theory and applications

    Science.gov (United States)

    Roth; Evans; Dietrich

    2000-10-01

    We present a versatile density functional approach (DFT) for calculating the depletion potential in general fluid mixtures. For the standard situation of a single big particle immersed in a sea of small particles near a fixed object, the system is regarded as an inhomogeneous binary mixture of big and small particles in the external field of the fixed object, and the limit of vanishing density of the big species, rho(b)-->0, is taken explicitly. In this limit our approach requires only the equilibrium density profile of a one-component fluid of small particles in the field of the fixed object, and a knowledge of the density independent weight functions which characterize the mixture functional. Thus, for a big particle near a planar wall or a cylinder or another fixed big particle, the relevant density profiles are functions of a single variable, which avoids the numerical complications inherent in brute force DFT. We implement our approach for additive hard-sphere mixtures, comparing our results with computer simulations for the depletion potential of a big sphere of radius R(b) in a sea of small spheres of radius R(s) near (i) a planar hard wall, and (ii) another big sphere. In both cases our results are accurate for size ratios s=R(s)/R(b) as small as 0.1, and for packing fractions of the small spheres eta(s) as large as 0.3; these are the most extreme situations for which reliable simulation data are currently available. Our approach satisfies several consistency requirements, and the resulting depletion potentials incorporate the correct damped oscillatory decay at large separations of the big particles or of the big particle and the wall. By investigating the depletion potential for high size asymmetries we assess the regime of validity of the well-known Derjaguin approximation for hard-sphere mixtures and argue that this fails, even for very small size ratios s, for all but the smallest values of eta(s) where the depletion potential reduces to the Asakura

  3. Morphologic characterisation and elemental distribution of Octopus vulgaris Cuvier, 1797 vestigial shell

    Energy Technology Data Exchange (ETDEWEB)

    Napoleao, P. [Departamento de Biologia Animal, Faculdade de Ciencias de Lisboa, C2, Campo Grande 1749-016, Lisbon (Portugal); Reis, C. Sousa [Departamento de Biologia Animal, Faculdade de Ciencias de Lisboa, C2, Campo Grande 1749-016, Lisbon (Portugal); Alves, L.C. [Laboratotio de Feixes de Ioes, Instituto Tecnologico e Nuclear, Estrada Nacional no. 10, 2685-953 Sacavem, Lisbon (Portugal); Centro de Fisica Nuclear, Universidade de Lisboa, Av. Prof. Egas Moniz 1700, Lisbon (Portugal); Pinheiro, T. [Laboratotio de Feixes de Ioes, Instituto Tecnologico e Nuclear, Estrada Nacional no. 10, 2685-953 Sacavem, Lisbon (Portugal) and Centro de Fisica Nuclear, Universidade de Lisboa, Av. Prof. Egas Moniz 1700, Lisbon (Portugal)]. E-mail: murmur@itn.mces.pt

    2005-04-01

    The elemental composition of mineral structures in marine organisms can provide useful information to reconstruct environmental histories of individuals and distinguish populations or stocks. In cephalopods, as Octopus vulgaris, morpho-physiological description of vestigial shells may contribute to a better understanding of the physiology, of the process involved in the increment growth and may eventually provide important and useful tools for the validation of age determination methods. Nuclear microprobe analysis was used to map chemical elements in O. vulgaris vestigial shell. The maps contain elemental and morphological information, and enabled especially through Cl and Ca distributions to classify bands of concentric rings. The levels of P, Ca and Sr decrease from central region to external rings, while those of S and Cl showed an inverse tendency. Enhanced concentrations of Fe, Cu and Zn were found in external rings, and no significant variations were detected in the K and Br contents. The results indicate that three regions can be established on the basis of the elemental contents distributions. Specially, the P and Ca variability can distinguish rings from central and external regions. The differential incorporation of elements in the vestigial shell observed may reflect environmental and physiological factors that are affecting the life cycle of this species.

  4. Composted oyster shell as lime fertilizer is more effective than fresh oyster shell.

    Science.gov (United States)

    Lee, Young Han; Islam, Shah Md Asraful; Hong, Sun Joo; Cho, Kye Man; Math, Renukaradhya K; Heo, Jae Young; Kim, Hoon; Yun, Han Dae

    2010-01-01

    Physio-chemical changes in oyster shell were examined, and fresh and composted oyster shell meals were compared as lime fertilizers in soybean cultivation. Structural changes in oyster shell were observed by AFM and FE-SEM. We found that grains of the oyster shell surface became smoother and smaller over time. FT-IR analysis indicated the degradation of a chitin-like compound of oyster shell. In chemical analysis, pH (12.3+/-0.24), electrical conductivity (4.1+/-0.24 dS m(-1)), and alkaline powder (53.3+/-1.12%) were highest in commercial lime. Besides, pH was higher in composted oyster shell meal (9.9+/-0.53) than in fresh oyster shell meal (8.4+/-0.32). The highest organic matter (1.1+/-0.08%), NaCl (0.54+/-0.03%), and moisture (15.1+/-1.95%) contents were found in fresh oyster shell meal. A significant higher yield of soybean (1.33 t ha(-1)) was obtained by applying composted oyster shell meal (a 21% higher yield than with fresh oyster shell meal). Thus composting of oyster shell increases the utility of oyster shell as a liming material for crop cultivation.

  5. Simulations of shell galaxies with GADGET-2: Multi-generation shell systems

    CERN Document Server

    Bartošková, Kateřina; Ebrová, Ivana; Jílková, Lucie; Křížek, Miroslav

    2011-01-01

    As the missing complement to existing studies of shell galaxies, we carried out a set of self-consistent N-body simulations of a minor merger forming a stellar shell system within a giant elliptical galaxy. We discuss the effect of a phenomenon possibly associated with the galaxy merger simulations --- a presence of multiple generations of shells.

  6. Search for Nonthermal X-Rays from Supernova Remnant Shells

    Science.gov (United States)

    Petre, R.; Keohane, J.; Hwang, U.; Allen, G.; Gotthelf, E.

    The demonstration by ASCA that the nonthermal X-ray emission from the rim of SN1006 is synchrotron emission from TeV electrons, produced in the same environment responsible for cosmic ray protons and nuclei (Koyama et al. 1995, Nature 378, 255), has stimulated a search for nonthermal X-rays from other remnants. Nonthermal emission has subsequently been found to arise in the shells of at least two other remnants, Cas A and IC 443. In Cas A, a hard tail is detected using ASCA, XTE, and OSSE to energies exceeding 100 keV; the shape of the spectrum rules out all mechanisms except synchrotron radiation. In IC 443, the previously known hard emission has been shown using ASCA to be isolated to a small region along the rim of the remnant, where the shock is interacting most strongly with a molecular cloud. Nonthermal X-ray emission is thought to arise here by enhanced cosmic ray production associated with the shock/cloud interaction (Keohane et al. 1997, ApJ in press). We describe the properties of the nonthermal emission in SN1006, Cas A, and IC 443, and discuss the status of our search for nonthermal emission associated with the shocks of other Galactic and LMC SNR's.

  7. Analytical solution of precessional switching in nanomagnets driven by hard-axis field pulses

    Energy Technology Data Exchange (ETDEWEB)

    D' Aquino, M., E-mail: daquino@uniparthenope.it [Engineering Department, University of Naples “Parthenope”, 80143 Naples (Italy); Perna, S.; Serpico, C. [DIETI, University of Naples Federico II, 80125 Naples (Italy); Bertotti, G. [Istituto Nazionale di Ricerca Metrologica, 10135 Torino (Italy); Mayergoyz, I.D. [ECE Department and UMIACS, University of Maryland, College Park, MD, 20742 (United States); Quercia, A. [DIETI, University of Naples Federico II, 80125 Naples (Italy)

    2016-04-01

    The precessional switching process of a magnetic nanoparticle subject to external field pulses applied along the hard-axis is considered. The critical field pulse amplitude necessary to realize the switching is determined. Then, the analytical solution of magnetization switching dynamics is derived in the lossless limit by using elliptic functions. Moreover, expressions for the field pulse duration tolerances which guarantee successful switching are also obtained. The theoretical predictions are verified by macrospin numerical simulations of ultra-fast magnetization switching.

  8. Self-standing quasi-mosaic crystals for focusing hard X-rays

    Energy Technology Data Exchange (ETDEWEB)

    Camattari, Riccardo; Guidi, Vincenzo; Bellucci, Valerio; Neri, Ilaria; Frontera, Filippo [Department of Physics and Earth Science, University of Ferrara, Via Saragat 1/c, 44122 Ferrara (Italy); CNR-IDASC SENSOR Lab. (Italy); Jentschel, Michael [Institut Laue Langevin, F-38042 Grenoble Cedex (France)

    2013-05-15

    A quasi mosaic bent crystal for high-resolution diffraction of X and {gamma} rays has been realized. A net curvature was imprinted to the crystal thanks to a series of superficial grooves to keep the curvature without external devices. The crystal highlights very high diffraction efficiency due to quasi mosaic curvature. Quasi mosaic crystals of this kind are proposed for the realization of a high-resolution focusing Laue lens for hard X-rays.

  9. The identification of genus, species and distribution of hard and soft ticks collected from Khorramabad district, Lorestan province, Iran

    Directory of Open Access Journals (Sweden)

    mahmod reza Taherian

    2014-09-01

    Conclusion: In this study four genus and six species of hard ticks (Ixodidae family were collected from livestocks and only one species was collected from fowls. Due to importance of ticks as vectors of diseases to humans, control of these external parasites and campaign against them are important tools in prevention of vector – borne diseases.

  10. Differential shrinkage induced formation of yolk-shell carbon microspheres toward enhanced microwave absorption

    Science.gov (United States)

    Tian, Chunhua; Du, Yunchen; Xu, Haiyan; Xue, Jianlei; Chu, Wenlei; Qiang, Rong; Han, Xijiang; Xu, Ping

    2017-09-01

    Rational design of the microstructure paves new ways for microwave absorbing materials because it can create more facilities for the attenuation of incident electromagnetic waves. In this study, a simple method is proposed to prepare yolk-shell carbon microspheres through differential shrinkage in the internal cores and external shells of polypyrrole microspheres with the assistance of outermost SiO2 coating. This method simplifies the preparation procedures and avoids strictly controlled conditions. The electromagnetic parameters, such as relative complex permittivity and permeability, of the as-prepared yolk-shell carbon microspheres, are investigated in the frequency range of 2.0-18.0 GHz. Compared with solid carbon microspheres, yolk-shell carbon microspheres exhibit significantly enhanced microwave absorption properties in terms of both the reflection loss intensity and absorption bandwidth. The minimum reflection loss value can reach up to -27.5 dB at 8.32 GHz with an absorber thickness of 2.96 mm. The absorption bandwidth over -10.0 dB is in the range of 11.3-16.2 GHz at the typical thickness of 2.0 mm. The enhanced microwave absorption properties may be attributed to the good attenuation ability and well matched characteristic impedance. This work not only provides a promising candidate for microwave absorption, but also provides an attractive strategy to prepare various yolk-shell composites.

  11. Core-shell magnetite nanoparticles surface encapsulated with smart stimuli-responsive polymer: synthesis, characterization, and LCST of viable drug-targeting delivery system.

    Science.gov (United States)

    Zhang, J L; Srivastava, R S; Misra, R D K

    2007-05-22

    We describe here the synthesis of a novel magnetic drug-targeting carrier characterized by a core-shell structure. The core-shell carrier combines the advantages of a magnetic core and the stimuli-responsive property of the thermosensitive biodegradable polymer shell (e.g., an on-off mechanism responsive to external temperature change). The composite nanoparticles are approximately 8 nm in diameter with approximately 3 nm shell. The lower critical solution temperature (LCST) is approximately 38 degrees C as determined by UV-vis absorption spectroscopy. The carrier is composed of cross-linked dextran grafted with a poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) [dextran-g-poly(NIPAAm-co-DMAAm)] shell and superparamagnetic Fe3O4 core. Fourier transform infrared spectroscopy (FTIR) confirmed the composition of the carrier. The synthesized magnetic carrier system has potential applications in magnetic drug-targeting delivery and magnetic resonance imaging.

  12. Magnetic dipole moment of a spherical shell with TRM acquired in a field of internal origin. [Thermoremanent Magnetization implications for lunar magnetic field

    Science.gov (United States)

    Srnka, L. J.

    1976-01-01

    The acquisition of thermoremanent magnetization (TRM) by a cooling spherical shell is studied for internal magnetizing dipole fields, using Runcorn's (1975) theorems on magnetostatics. If the shell cools progressively inward, inner regions acquire TRM in a net field composed of the dipole source term plus a uniform field due to the outer magnetized layers. In this case, the global dipole moment and external remanent field are nonzero when the whole shell has cooled below the Curie point and the source dipole has disappeared. The remanent field outside the shell is found to depend on the thickness, radii, and cooling rate of the shell, as well as the coefficient of TRM and the intensity of the magnetizing field. Some implications for the moon's remanent dipole moment are discussed.

  13. Lead behavior in abalone shell

    Science.gov (United States)

    Hirao, Yoshimitsu; Matsumoto, Akikazu; Yamakawa, Hiroshi; Maeda, Masaru; Kimura, Kan

    1994-08-01

    In order to gain information about the behavior of heavy metals in biological assimilation processes in a marine food chain and to investigate the possibility that lead pollution in a marine environment can be estimated by measurement of a small number of key materials from such a food chain, muscle and shell were analyzed from abalone ( Haliotis) from a shallow water locality in a Japanese coastal region. Lead concentrations in muscle were about 26 ppb for abalone of approximately 3 years old and decreased systematically with increasing age of animals sampled, to about 3.3 ppb for a specimen approximately 8 years old. Lead concentrations in shell material gradually decreased also, from 150 ppb to 82 ppb in the oldest specimen. The decrease of concentration in tissues with increasing age indicates that a mechanism for exclusion of lead during tissue growth becomes more efficient with age. Along the food chain in which abalone is the final stage, lead was enriched at the first stage, from seawater to algae, by a factor of 100. Lead was diminished at all subsequent stages of the chain. Tissue of artificially cultured abalone had four times higher lead values compared to abalone grown in natural conditions, and this appears to reflect the fact that lead concentration was three times higher in seawater in the cultured environment.

  14. Strain Rate and Anisotropic Microstructure Dependent Mechanical Behaviors of Silkworm Cocoon Shells.

    Directory of Open Access Journals (Sweden)

    Jun Xu

    Full Text Available Silkworm cocoons are multi-layered composite structures comprised of high strength silk fiber and sericin, and their mechanical properties have been naturally selected to protect pupas during metamorphosis from various types of external attacks. The present study attempts to gain a comprehensive understanding of the mechanical properties of cocoon shell materials from wild silkworm species Antheraea pernyi under dynamic loading rates. Five dynamic strain rates from 0.00625 s-1 to 12.5 s-1 are tested to show the strain rate sensitivity of the cocoon shell material. In the meantime, the anisotropy of the cocoon shell is considered and the cocoon shell specimens are cut along 0°, 45° and 90° orientation to the short axis of cocoons. Typical mechanical properties including Young's modulus, yield strength, ultimate strength and ultimate strain are extracted and analyzed from the stress-strain curves. Furthermore, the fracture morphologies of the cocoon shell specimens are observed under scanning electron microscopy to help understand the relationship between the mechanical properties and the microstructures of the cocoon material. A discussion on the dynamic strain rate effect on the mechanical properties of cocoon shell material is followed by fitting our experimental results to two previous models, and the effect could be well explained. We also compare natural and dried cocoon materials for the dynamic strain rate effect and interestingly the dried cocoon shells show better overall mechanical properties. This study provides a different perspective on the mechanical properties of cocoon material as a composite material, and provides some insight for bio-inspired engineering materials.

  15. In vitro hyperthermia with improved colloidal stability and enhanced SAR of magnetic core/shell nanostructures.

    Science.gov (United States)

    Patil, R M; Thorat, N D; Shete, P B; Otari, S V; Tiwale, B M; Pawar, S H

    2016-02-01

    Magnetic core/shell nanostructures of Fe3O4 nanoparticles coated with oleic acid and betaine-HCl were studied for their possible use in magnetic fluid hyperthermia (MFH). Their colloidal stability and heat induction ability were studied in different media viz. phosphate buffer solution (PBS), saline solution and glucose solution with different physiological conditions and in human serum. The results showed enhanced colloidal stability in these media owing to their high zeta potential values. Heat induction studies showed that specific absorption rates (SAR) of core/shells were 82-94W/g at different pH of PBS and concentrations of NaCl and glucose. Interestingly, core/shells showed 78.45±3.90W/g SAR in human serum. The cytotoxicity of core/shells done on L929 and HeLa cell lines using 3-(4,5-dimethylthiazol-2-yl)2,5-diphenyl tetrazolium bromide and trypan blue dye exclusion assays showed >89% and >80% cell viability for 24 and 48h respectively. Core/shell structures were also found to be very efficient for in vitro MFH on cancer cell line. About 95% cell death was occurred in 90min after hyperthermia treatment. The mechanism of cell death was found to be elevated ROS generation in cells after exposure to core/shells in external magnetic field. This study showed that these core/shells have a great potential to be used in in vivo MFH. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. Optimal Auctions with Financial Externalities

    NARCIS (Netherlands)

    Maasland, E.; Onderstal, A.M.

    2002-01-01

    We construct optimal auctions when bidders face financial externalities.In a Coasean World, in which the seller cannot prevent a perfect resale market, nor withhold the object, the lowest-price all-pay auction is optimal.In a Myersonean World, in which the seller can both prevent resale after the au

  17. Organizing for External Knowledge Sourcing

    DEFF Research Database (Denmark)

    Rabbiosi, Larissa; Reichstein, Toke

    2011-01-01

    The aim of this article is to provide an introduction to the special issue. We briefly consider the external knowledge sourcing and organizing for innovation literatures, which offer a background for the special issue, and we highlight their mutual dialogue. We then illustrate the main findings...

  18. Measuring Externalities in Program Evaluation

    NARCIS (Netherlands)

    Janssens, Wendy

    2005-01-01

    Impact evaluations of development programmes usually focus on a comparison of participants with a control group. However, if the programme generates externalities for non-participants such an approach will capture only part of the programme's impact. Based on a unique large-scale quantitative survey

  19. Lupus vulgaris of external nose.

    Science.gov (United States)

    Bhandary, Satheesh Kumar; Ranganna, B Usha

    2008-12-01

    Lupus vulgaris is the commonest form of cutaneous tuberculosis which commonly involve trunk and buttocks. Lupus vulgaris affecting nose and face, are rarely reported in India. This study reports an unusual case of lupus vulgaris involving the external nose that showed dramatic outcome after six months of anti- tubercular treatment.

  20. [Treatment by external insulin pump].

    Science.gov (United States)

    Clavel, Sylvaine

    2010-12-01

    Since the recent recommendations by the French speaking association for research on diabetes and metabolic illnesses (Alfediam), treatment by insulin pump has found itself in competition with basal-bolus, a procedure using similar injections of insulin which has become a benchmark treatment. The latest Alfediam guidelines focus on defining ways of treating diabetics with an external insulin pump.

  1. Matchings with Externalities and Attitudes

    DEFF Research Database (Denmark)

    Branzei, Simina; Michalak, Tomasz; Rahwan, Talal;

    2013-01-01

    Two-sided matchings are an important theoretical tool used to model markets and social interactions. In many real-life problems the utility of an agent is influenced not only by their own choices, but also by the choices that other agents make. Such an influence is called an externality. Whereas ...

  2. Post-external dacryocystorhinostomy lagophthalmos.

    Science.gov (United States)

    Odat, Thabit A; Odat, Haitham A; Khraisat, Heba; Odat, Mohannad A; Alzoubi, Firas Q

    2015-06-01

    To describe lagophthalmos and eyelid closure abnormality after external dacryocystorhinostomy (DCR). A retrospective review of medical records and postoperative photographs of 79 patients who underwent external DCR for nasolacrimal duct obstruction and developed eyelid closure abnormality and lagophthalmos with or without exposure keratopathy was conducted. Collected data included age, sex, indication for surgery, laterality, length and type of incision, length of follow-up duration, presence of punctate epithelial keratopathy, and time for resolution of eyelid closure abnormalities. Twenty-seven patients with 28 external dacryocystorhinostomy had postoperative eyelid closure abnormalities. Male to female ratio was 1:6. The mean age was 40.1 years (range 9-80 years). All surgeries were performed through diagonal skin incision. Lagophthalmos involving the medial third of the palpebral fissure was noticed in 28.6 % of cases. All patients had hypometric blink mainly of the upper eyelid. One patient had punctate epithelial keratopathy. Resolution of lagophthalmos was noticed over a period of 1-5 weeks with an average of 3 weeks. None of the patients continued to have residual hypometric blink or punctate keratopathy at the last follow-up time. The mean follow-up period was 4.2 months (range 3-6 months). Eyelid closure abnormality and lagophthalmos after external DCR are underestimated problems. Spontaneous resolution is seen in all cases weeks to months after surgery.

  3. Femoral Reconstruction Using External Fixation

    Directory of Open Access Journals (Sweden)

    Yevgeniy Palatnik

    2011-01-01

    Full Text Available Background. The use of an external fixator for the purpose of distraction osteogenesis has been applied to a wide range of orthopedic problems caused by such diverse etiologies as congenital disease, metabolic conditions, infections, traumatic injuries, and congenital short stature. The purpose of this study was to analyze our experience of utilizing this method in patients undergoing a variety of orthopedic procedures of the femur. Methods. We retrospectively reviewed our experience of using external fixation for femoral reconstruction. Three subgroups were defined based on the primary reconstruction goal lengthening, deformity correction, and repair of nonunion/bone defect. Factors such as leg length discrepancy (LLD, limb alignment, and external fixation time and complications were evaluated for the entire group and the 3 subgroups. Results. There was substantial improvement in the overall LLD, femoral length discrepancy, and limb alignment as measured by mechanical axis deviation (MAD and lateral distal femoral angle (LDFA for the entire group as well as the subgroups. Conclusions. The Ilizarov external fixator allows for decreased surgical exposure and preservation of blood supply to bone, avoidance of bone grafting and internal fixation, and simultaneous lengthening and deformity correction, making it a very useful technique for femoral reconstruction.

  4. Three-Dimensional Self-Assembly of Core/Shell-Like Nanostructures for High-Performance Nanocomposite Permanent Magnets.

    Science.gov (United States)

    Li, Hailing; Li, Xiaohong; Guo, Defeng; Lou, Li; Li, Wei; Zhang, Xiangyi

    2016-09-14

    Core/shell nanostructures are fascinating for many advanced applications including strong permanent magnets, magnetic recording, and biotechnology. They are generally achieved via chemical approaches, but these techniques limit them to nanoparticles. Here, we describe a three-dimensional (3D) self-assembly of core/shell-like nanocomposite magnets, with hard-magnetic Nd2Fe14B core of ∼45 nm and soft-magnetic α-Fe shell of ∼13 nm, through a physical route. The resulting Nd2Fe14B/α-Fe core/shell-like nanostructure allows both large remanent magnetization and high coercivity, leading to a record-high energy product of 25 MGOe which reaches the theoretical limit for isotropic Nd2Fe14B/α-Fe nanocomposite magnets. Our approach is based on a sequential growth of the core and shell nanocrystals in an alloy melt. These results make an important step toward fabricating core/shell-like nanostructure in 3D materials.

  5. Angular resolution measurements at SPring-8 of a hard x-ray optic for the New Hard X-ray Mission

    Science.gov (United States)

    Spiga, D.; Raimondi, L.; Furuzawa, A.; Basso, S.; Binda, R.; Borghi, G.; Cotroneo, V.; Grisoni, G.; Kunieda, H.; Marioni, F.; Matsumoto, H.; Mori, H.; Miyazawa, T.; Negri, B.; Orlandi, A.; Pareschi, G.; Salmaso, B.; Tagliaferri, G.; Uesugi, K.; Valsecchi, G.; Vernani, D.

    2011-09-01

    The realization of X-ray telescopes with imaging capabilities in the hard (> 10 keV) X-ray band requires the adoption of optics with shallow (=10 m shall be produced and tested. Full-illumination tests of such mirrors are usually performed with onground X-ray facilities, aimed at measuring their effective area and the angular resolution; however, they in general suffer from effects of the finite distance of the X-ray source, e.g. a loss of effective area for double reflection. These effects increase with the focal length of the mirror under test; hence a "partial" full-illumination measurement might not be fully representative of the in-flight performances. Indeed, a pencil beam test can be adopted to overcome this shortcoming, because a sector at a time is exposed to the X-ray flux, and the compensation of the beam divergence is achieved by tilting the optic. In this work we present the result of a hard X-ray test campaign performed at the BL20B2 beamline of the SPring-8 synchrotron radiation facility, aimed at characterizing the Point Spread Function (PSF) of a multilayer-coated Wolter-I mirror shell manufactured by Nickel electroforming. The mirror shell is a demonstrator for the NHXM hard X-ray imaging telescope (0.3 - 80 keV), with a predicted HEW (Half Energy Width) close to 20 arcsec. We show some reconstructed PSFs at monochromatic X-ray energies of 15 to 63 keV, and compare them with the PSFs computed from post-campaign metrology data, self-consistently treating profile and roughness data by means of a method based on the Fresnel diffraction theory. The modeling matches the measured PSFs accurately.

  6. Hard X-ray identification of Eta Carinae and steadiness close to periastron

    CERN Document Server

    Leyder, Jean-Christophe; Rauw, Gregor; 10.1051/0004-6361/201014316

    2010-01-01

    Context: The colliding-wind binary Eta Car exhibits soft X-ray thermal emission that varies strongly around periastron, and non-thermal emission seen in hard X-rays and gamma-rays. Aims: To definitively identify Eta Car as the source of the hard X-ray emission, to examine how changes in the 2-10 keV band influence changes in the hard X-ray band, and to understand more clearly the mechanisms producing the non-thermal emission using new INTEGRAL observations obtained close to periastron. Methods: A Chandra observation encompassing the ISGRI error circle was analysed, and all other soft X-ray sources (including the outer shell of Eta Car itself) were discarded as likely counter-parts. New hard X-ray images of Eta Car were studied close to periastron, and compared to previous observations far from periastron. Results: The INTEGRAL component, when represented by a power law (with a photon index of 1.8), would produce more emission in the Chandra band than observed from any point source in the ISGRI error circle ap...

  7. The First Focused Hard X-ray Images of the Sun with NuSTAR

    CERN Document Server

    Grefenstette, Brian W; Krucker, Säm; Hudson, Hugh; Hannah, Iain G; Smith, David M; Vogel, Julia K; White, Stephen M; Madsen, Kristin K; Marsh, Andrew J; Caspi, Amir; Chen, Bin; Shih, Albert; Kuhar, Matej; Boggs, Steven E; Christensen, Finn E; Craig, William W; Forster, Karl; Hailey, Charles J; Harrison, Fiona A; Miyasaka, Hiromasa; Stern, Daniel; Zhang, William W

    2016-01-01

    We present results from the the first campaign of dedicated solar observations undertaken by the \\textit{Nuclear Spectroscopic Telescope ARray} ({\\em NuSTAR}) hard X-ray telescope. Designed as an astrophysics mission, {\\em NuSTAR} nonetheless has the capability of directly imaging the Sun at hard X-ray energies ($>$3~keV) with an increase in sensitivity of at least two magnitude compared to current non-focusing telescopes. In this paper we describe the scientific areas where \\textit{NuSTAR} will make major improvements on existing solar measurements. We report on the techniques used to observe the Sun with \\textit{NuSTAR}, their limitations and complications, and the procedures developed to optimize solar data quality derived from our experience with the initial solar observations. These first observations are briefly described, including the measurement of the Fe K-shell lines in a decaying X-class flare, hard X-ray emission from high in the solar corona, and full-disk hard X-ray images of the Sun.

  8. Fundamentals and hard-switching converters

    CERN Document Server

    Ioinovici, Adrian

    2013-01-01

    Volume 1 Fundamentals and Hard-switching Converters introduces the key challenges in power electronics from basic components to operation principles and presents classical hard- and soft-switching DC to DC converters, rectifiers and inverters. At a more advanced level, it provides comprehensive analysis of DC and AC models comparing the available approaches for their derivation and results. A full treatment of DC to DC hard-switching converters is given, from fundamentals to modern industrial solutions and practical engineering insight. The author elucidates various contradictions and misunderstandings in the literature, for example, in the treatment of the discontinuous conduction operation or in deriving AC small-signal models of converters.

  9. The structural acoustic properties of stiffened shells

    DEFF Research Database (Denmark)

    Luan, Yu

    2008-01-01

    . This is important when a number of stiffened plates are combined in a complicated structure composed of many plates. However, whereas the equivalent plate theory is well established there is no similar established theory for stiffened shells. This paper investigates the mechanical and structural acoustic properties...... of curved shells with stiffening ribs. Finite element simulations and experimental data will be compared and discussed....

  10. Isothermal Circumstellar Dust Shell Model for Teaching

    Science.gov (United States)

    Robinson, G.; Towers, I. N.; Jovanoski, Z.

    2009-01-01

    We introduce a model of radiative transfer in circumstellar dust shells. By assuming that the shell is both isothermal and its thickness is small compared to its radius, the model is simple enough for students to grasp and yet still provides a quantitative description of the relevant physical features. The isothermal model can be used in a…

  11. PALM KERNEL SHELL AS AGGREGATE FOR LIGHT

    African Journals Online (AJOL)

    of cement, sand, gravel andpalm kernel shells respectively gave the highest compressive strength of ... Keywords: Aggregate, Cement, Concrete, Sand, Palm Kernel Shell. ... delivered to the jOb Slte in a plastic ... structures, breakwaters, piers and docks .... related to cement content at a .... sheet and the summary is shown.

  12. Deformation of cylindrical shells under thermal shock

    Energy Technology Data Exchange (ETDEWEB)

    Aptukov, V.N. (Institut Mekhaniki Sploshnykh Sred, Perm (USSR))

    1990-06-01

    The deformation and fracture behavior of cylindrical shells under conditions of a nonsymmetric thermal shock is investigated numerically using a two-dimensional formulation. In particular, attention is given to the effect of the shell thickness on the deformation and fracture characteristics. Some computational difficulties associated with the solution of problems of this type are examined. 16 refs.

  13. Microsoft Exchange Server PowerShell cookbook

    CERN Document Server

    Andersson, Jonas

    2015-01-01

    This book is for messaging professionals who want to build real-world scripts with Windows PowerShell 5 and the Exchange Management Shell. If you are a network or systems administrator responsible for managing and maintaining Exchange Server 2013, you will find this highly useful.

  14. Exact internal controllability for shallow shells

    Institute of Scientific and Technical Information of China (English)

    FENG Shaoji; FENG Dexing

    2006-01-01

    The internal control problem is considered, based on the linear displacement equations of shallow shell. It is shown, with some checkable geometric conditions on control region, that the undergoing shallow shell is exactly controllable by using Hilbert uniqueness method (HUM), piecewise multiplier method and Riemannian geometry method. Then some examples are given to show the assumed geometric conditions.

  15. Thick-shell nanocrystal quantum dots

    Science.gov (United States)

    Hollingsworth, Jennifer A.; Chen, Yongfen; Klimov, Victor I.; Htoon, Han; Vela, Javier

    2011-05-03

    Colloidal nanocrystal quantum dots comprising an inner core having an average diameter of at least 1.5 nm and an outer shell, where said outer shell comprises multiple monolayers, wherein at least 30% of the quantum dots have an on-time fraction of 0.80 or greater under continuous excitation conditions for a period of time of at least 10 minutes.

  16. Hydration shells exchange charge with their protein

    DEFF Research Database (Denmark)

    Abitan, Haim; Lindgård, Per-Anker; Nielsen, Bjørn Gilbert;

    2010-01-01

    Investigation of the interaction between a protein and its hydration shells is an experimental and theoretical challenge. Here, we used ultrasonic pressure waves in aqueous solutions of a protein to explore the conformational states of the protein and its interaction with its hydration shells. In...

  17. Intershell correlations in photoionization of outer shells

    Energy Technology Data Exchange (ETDEWEB)

    Amusia, M.Ya. [The Racah Institute of Physics, The Hebrew University of Jerusalem, Jerusalem 91904 (Israel); A.F. Ioffe Physical-Technical Institute, St. Petersburg 194021 (Russian Federation); Chernysheva, L.V. [A.F. Ioffe Physical-Technical Institute, St. Petersburg 194021 (Russian Federation); Drukarev, E.G. [National Research Center “Kurchatov Institute”, Konstantinov Petersburg Nuclear Physics Institute, St. Petersburg 188300 (Russian Federation)

    2016-02-15

    We demonstrate that the cross sections for photoionization of the outer shells are noticeably modified at the photon energies close to the thresholds of ionization of the inner shells due to correlations with the latter. The correlations may lead to increase or to decrease of the cross sections just above the ionization thresholds.

  18. Automated Shell Theory for Rotating Structures (ASTROS)

    Science.gov (United States)

    Foster, B. J.; Thomas, J. M.

    1973-01-01

    Computer program can be used to analyze any disk or shell of revolution of arbitrary cross section under inertial loads caused by rotation about shell axis and under various static loads, including thermal gradients. Geometric shapes incorporated in program are ellipsoidal, spherical, ogival, toroidal, conical, circular plate, cylindrical, and parabolic.

  19. Microcapsules with Protein Fibril-Reinforced Shells

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2015-01-01

    Layer-by-layer adsorption of oppositely charged polymers on template particles is a well-established and extensively studied process for the formation of core-shell microcapsules. In this chapter we discuss how this process can be used to create microcapsules with a nanocomposite shell, consisting

  20. Microcapsules with Protein Fibril-Reinforced Shells

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2015-01-01

    Layer-by-layer adsorption of oppositely charged polymers on template particles is a well-established and extensively studied process for the formation of core-shell microcapsules. In this chapter we discuss how this process can be used to create microcapsules with a nanocomposite shell, consisting o

  1. Collapsing spherical null shells in general relativity

    Directory of Open Access Journals (Sweden)

    S Khakshournia

    2011-03-01

    Full Text Available In this work, the gravitational collapse of a spherically symmetric null shell with the flat interior and a charged Vaidya exterior spacetimes is studied. There is no gravitational impulsive wave present on the null hypersurface which is shear-free and contracting. It follows that there is a critical radius at which the shell bounces and starts expanding.

  2. Treatment of maxillary central incisor with external root resorption using mineral trioxide aggregate: 18 months follow-up

    OpenAIRE

    2013-01-01

    External cervical resorption is the loss of dental hard tissue as a result of odontoclastic action; it usually begins on the cervical region of the root surface of the teeth. This case report demonstrates an external cervical resorption in a maxillary central incisor of a 24-year-old male patient. After surgical intervention and root canal treatment, the resorption was subsequently sealed with mineral trioxide aggregate. The 18 months follow-up demonstrates no pathological changes on clinical...

  3. Defensive externality and blame projection following failure.

    Science.gov (United States)

    Hochreich, D J

    1975-09-01

    This study focuses upon the relationship between internal-external control and defensive blame projection. Trust was used as a moderator variable for making differential predictions concerning the behavior of two subgroups of externals: defensive externals, whose externality is presumed to reflect primarily a verbal technique of defense, and congruent externals, whose externality reflects a more genuine belief that most outcomes are determined by forces beyond their personal control. As predicted, defensive externals showed a stronger tendency than did congruent externals and internals to resort to blame projection following failure at an achievement task. There were no group differences in attribution following task success. Defensive externals were found to be more responsive to negative feedback than were congruent externals.

  4. Heat conduction in a confined solid strip: response to external strain.

    Science.gov (United States)

    Chaudhuri, Debasish; Dhar, Abhishek

    2006-07-01

    We study heat conduction in a system of hard disks confined to a narrow two-dimensional channel. The system is initially in a high-density solidlike phase. We study, through nonequilibrium molecular dynamics simulations, the dependence of the heat current on an externally applied elongational strain. The strain leads to deformation and failure of the solid and we find that the changes in internal structure can lead to very sharp changes in the heat current. A simple free-volume-type calculation of the heat current in a finite hard-disk system is proposed. This reproduces some qualitative features of the current-strain graph for small strains.

  5. PyORBIT: A Python Shell For ORBIT

    Energy Technology Data Exchange (ETDEWEB)

    Jean-Francois Ostiguy; Jeffrey Holmes

    2003-07-01

    ORBIT is code developed at SNS to simulate beam dynamics in accumulation rings and synchrotrons. The code is structured as a collection of external C++ modules for SuperCode, a high level interpreter shell developed at LLNL in the early 1990s. SuperCode is no longer actively supported and there has for some time been interest in replacing it by a modern scripting language, while preserving the feel of the original ORBIT program. In this paper, we describe a new version of ORBIT where the role of SuperCode is assumed by Python, a free, well-documented and widely supported object-oriented scripting language. We also compare PyORBIT to ORBIT from the standpoint of features, performance and future expandability.

  6. Faraday Wave Turbulence on a Spherical Liquid Shell

    Science.gov (United States)

    Holt, R. Glynn; Trinh, Eugene H.

    1996-01-01

    Millimeter-radius liquid shells are acoustically levitated in an ultrasonic field. Capillary waves are observed on the shells. At low energies (minimal acoustic amplitude, thick shell) a resonance is observed between the symmetric and antisymmetric thin film oscillation modes. At high energies (high acoustic pressure, thin shell) the shell becomes fully covered with high-amplitude waves. Temporal spectra of scattered light from the shell in this regime exhibit a power-law decay indicative of turbulence.

  7. The main factors causing "imperfect shell development" (ISD) in thin-shelled walnut

    Institute of Scientific and Technical Information of China (English)

    Baoguo LI; Suping GUO; Guohui QI

    2009-01-01

    Effects of solar radiation, rainfall and cultivars on "imperfect shell development" (ISD) of the thin-shelled walnut were studied by means of field investigation and weather data comparison. The results showed that cultivars were the main factor causing the ISD of the thin-shelled walnut. Among the cultivars, Shangsong 6 was the most sensitive one, whose percentage of imperfect shell attained 67.3%, followed by Xiangling (52.7%). However, the rate of imperfect shells in Zhonglin 5 was only 20.9%. It was sug-gested that the main environmental factors contributing to the ISD of the thin-shelled walnut were sunlight intensity and rainfall during the shell-hardening stage.

  8. Local shell-to-shell energy transfer via nonlocal interactions in fluid turbulence

    Indian Academy of Sciences (India)

    Mahendra K Verma; Arvind Ayyer; Olivier Debliquy; Shishir Kumar; Amar V Chandra

    2005-08-01

    In this paper we analytically compute the strength of nonlinear interactions in a triad, and the energy exchanges between wave-number shells in incompressible fluid turbulence. The computation has been done using first-order perturbative field theory. In three dimensions, magnitude of triad interactions is large for nonlocal triads, and small for local triads. However, the shell-to-shell energy transfer rate is found to be local and forward. This result is due to the fact that the nonlocal triads occupy much less Fourier space volume than the local ones. The analytical results on three-dimensional shell-to-shell energy transfer match with their numerical counterparts. In two-dimensional turbulence, the energy transfer rates to the nearby shells are forward, but to the distant shells are backward; the cumulative effect is an inverse cascade of energy.

  9. A static spherically symmetric thin shell wormhole colliding with a spherical thin shell

    CERN Document Server

    Gao, Sijie

    2015-01-01

    We consider a static spherically symmetric thin shell wormhole collides with another thin shell consisting of ordinary matter. By employing the geometrical constraint, which leads to the conservation of energy and momentum, we show that the state after the collision can be solved from the initial data. In the low speed approximation, the solutions are rather simple. The shell may either bounce back or pass through the wormhole. In either case, the wormhole shrinks right after the collision. In the ``bouncing'' case, a surprising result is that the radial speeds before and after the collision satisfy an addition law, which is independent of the masses of the wormhole and the shell. Once the shell passes through the wormhole, we find that the shell always expands. However, the expansion rate is the same as its collapsing rate right before the collision. Finally, we find out the solution for the shell moving together with the wormhole.

  10. A peridynamic theory for linear elastic shells

    CERN Document Server

    Chowdhury, Shubhankar Roy; Roy, Debasish; Reddy, J N

    2015-01-01

    A state-based peridynamic formulation for linear elastic shells is presented. The emphasis is on introducing, possibly for the first time, a general surface based peridynamic model to represent the deformation characteristics of structures that have one physical dimension much smaller than the other two. A new notion of curved bonds is exploited to cater for force transfer between the peridynamic particles describing the shell. Starting with the three dimensional force and deformation states, appropriate surface based force, moment and several deformation states are arrived at. Upon application on the curved bonds, such states beget the necessary force and deformation vectors governing the motion of the shell. Correctness of our proposal on the peridynamic shell theory is numerically assessed against static deformation of spherical and cylindrical shells and flat plates.

  11. Engineered Magnetic Core-Shell Structures.

    Science.gov (United States)

    Alavi Nikje, Mir Mohammad; Vakili, Maryam

    2015-01-01

    In recent years, engineered magnetic core-shell structures are playing an important role in the wide range of various applications. These magnetic core-shell structures have attracted considerable attention because of their unique properties and various applications. Also, the synthesis of engineered magnetic core-shell structures has attracted practical interest because of potential applications in areas such as ferrofluids, medical imaging, drug targeting and delivery, cancer therapy, separations, and catalysis. So far a large number of engineered magnetic core-shell structures have been successfully synthesized. This review article focuses on the recent progress in synthesis and characterization of engineered magnetic core-shell structures. Also, this review gives a brief description of the various application of these structures. It is hoped that this review will play some small part in helping future developments in important field.

  12. Structural shell analysis understanding and application

    CERN Document Server

    Blaauwendraad, Johan

    2014-01-01

    The mathematical description of the properties of a shell is much more elaborate than those of beam and plate structures. Therefore many engineers and architects are unacquainted with aspects of shell behaviour and design, and are not familiar with sufficiently reliable shell theories for the different shell types as derived in the middle of the 20th century. Rather than contributing to theory development, this university textbook focuses on architectural and civil engineering schools. Of course, practising professionals will profit from it as well. The book deals with thin elastic shells, in particular with cylindrical, conical and spherical types, and with elliptic and hyperbolic paraboloids. The focus is on roofs, chimneys, pressure vessels and storage tanks. Special attention is paid to edge bending disturbance zones, which is indispensable knowledge in FE meshing. A substantial part of the book results from research efforts in the mid 20th century at Delft University of Technology. As such, it is a valua...

  13. Mechanical and Corrosion Behaviour of Zn-27Al Based Composites Reinforced with Groundnut Shell Ash and Silicon Carbide

    OpenAIRE

    K.K. Alaneme; B.O. Fatile; J.O. Borode

    2014-01-01

    The mechanical and corrosion behaviour of Zn-27Al alloy based composites reinforced with groundnut shell ash and silicon carbide was investigated. Experimental test composite samples were prepared by melting Zn-27Al alloy with pre-determined proportions of groundnut ash and silicon carbide as reinforcements using double stir casting. Microstructural examination, mechanical properties and corrosion behaviour were used to characterize the composites produced. The results show that hardness and ...

  14. Rapid crystallization of externally produced ions in a Penning trap

    CERN Document Server

    Murboeck, T; Birkl, G; Noertershaeuser, W; Thompson, R C; Vogel, M

    2016-01-01

    We have studied the cooling dynamics, formation process and geometric structure of mesoscopic crystals of externally produced magnesium ions in a Penning trap. We present a cooling model and measurements for a combination of buffer gas cooling and laser cooling which has been found to reduce the ion kinetic energy by eight orders of magnitude from several hundreds of eV to micro-eV and below within seconds. With ion numbers of the order of 1000 to 100000, such cooling leads to the formation of ion Coulomb crystals which display a characteristic shell structure in agreement with theory of non-neutral plasmas. We show the production and characterization of two-species ion crystals as a means of sympathetic cooling of ions lacking a suitable laser-cooling transition.

  15. Reconstruction of seasonal temperature variability in the tropical Pacific Ocean from the shell of the scallop, Comptopallium radula

    Science.gov (United States)

    Thébault, Julien; Chauvaud, Laurent; Clavier, Jacques; Guarini, Jennifer; Dunbar, Robert B.; Fichez, Renaud; Mucciarone, David A.; Morize, Eric

    2007-02-01

    We investigated the oxygen isotope composition (δ 18O) of shell striae from juvenile Comptopallium radula (Mollusca; Pectinidae) specimens collected live in New Caledonia. Bottom-water temperature and salinity were monitored in-situ throughout the study period. External shell striae form with a 2-day periodicity in this scallop, making it possible to estimate the date of precipitation for each calcite sample collected along a growth transect. The oxygen isotope composition of shell calcite (δ 18O shell calcite) measured at almost weekly resolution on calcite accreted between August 2002 and July 2003 accurately tracks bottom-water temperatures. A new empirical paleotemperature equation for this scallop species relates temperature and δ 18O shell calcite: t(°C)=20.00(±0.61)-3.66(±0.39)×(δ18O-δ18O) The mean absolute accuracy of temperature estimated using this equation is 1.0 °C at temperatures between 20 and 30 °C. Uncertainties regarding the precise timing of CaCO 3 deposition and the actual variations in δ 18O water at our study sites probably contribute to this error. Comparison with a previously published empirical paleotemperature equation indicates that C. radula calcite is enriched in 18O by ˜0.7‰ relative to equilibrium. Given the direction of this offset and the lack of correlation between shell growth rate and δ 18O shell calcite, this disequilibrium is unlikely to be related to kinetic isotope effects. We suggest that this enrichment reflects (1) a relatively low pH in the scallop's marginal extrapallial fluid (EPF), (2) an isotopic signature of the EPF different from that of seawater, or (3) Rayleigh fractionation during the biocalcification process. Relative changes in δ 18O shell calcite reflect seawater temperature variability at this location and we suggest that the shell of C. radula may be useful as an archive of past seawater temperatures.

  16. Bifunctional luminescent and magnetic core/shell type nanostructures Fe3O4@CeF3 :Tb3+/Si

    Institute of Scientific and Technical Information of China (English)

    M. Runowski; T. Grzyb, S. Lis

    2011-01-01

    A facile co-precipitation and microemulsion methods were applied to obtain core/shell type nanoparticles.Cerium fluoride doped with terbium(Ⅲ) ions supplied intensive green luminescence of the system.Due to the presence of magnetite nanoparticles as cores,the product was highly sensitive to external magnetic field.Both sorts of nanostructures were encapsulated by silica shell.Such external layer of inert oxide can potentially increase the resistance of prepared nanostructures to thermal oxidation,aggressive agents,changing of pH or destructive radiation.Morphology of the product was examined using transmission electron microscopy (TEM).Formations of the core/shell type nanostructures were clearly seen in the TEM pictures.Powder X-ray diffraction (XRD) confirmed the structure of the products,their nanocrystallinity and amorphous nature of silica shell.Optical properties were investigated by measuring excitation and emission spectra.Such multifunctional luminescent and magnetic nanoparticles coated with easily functionalized silica shell could be applied in many field of science.

  17. Analytic studies of the hard dumbell fluid

    Science.gov (United States)

    Morriss, G. P.; Cummings, P. T.

    A closed form analytic theory for the structure of the hard dumbell fluid is introduced and evaluated. It is found to be comparable in accuracy to the reference interaction site approximation (RISA) of Chandler and Andersen.

  18. Why Are Drugs So Hard to Quit?

    Medline Plus

    Full Text Available ... it free Find out why Close Why Are Drugs So Hard to Quit? National Institute on Drug Abuse (NIDA/NIH) Loading... Unsubscribe from National Institute on Drug Abuse (NIDA/NIH)? Cancel Unsubscribe Working... Subscribe Subscribed ...

  19. Why Are Drugs So Hard to Quit?

    Medline Plus

    Full Text Available ... navigation Sign in Search Loading... Close Yeah, keep it Undo Close This video is unavailable. Watch Queue ... changes the signals in your brain and makes it hard to feel OK without the drug. This ...

  20. Radiation Hard High Performance Optoelectronic Devices Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High-performance, radiation-hard, widely-tunable integrated laser/modulator chip and large-area avalanche photodetectors (APDs) are key components of optical...