WorldWideScience

Sample records for external granule layer

  1. Asymmetric cell division of granule neuron progenitors in the external granule layer of the mouse cerebellum

    OpenAIRE

    Parthiv Haldipur; Iswariya Sivaprakasam; Vinod Periasamy; Subashika Govindan; Shyamala Mani

    2015-01-01

    ABSTRACT The plane of division of granule neuron progenitors (GNPs) was analysed with respect to the pial surface in P0 to P14 cerebellum and the results showed that there was a significant bias towards the plane of cell division being parallel to pial surface across this developmental window. In addition, the distribution of β-Catenin in anaphase cells was analysed, which showed that there was a significant asymmetry in the distribution of β-Catenin in dividing GNPs. Further, inhibition of S...

  2. Asymmetric cell division of granule neuron progenitors in the external granule layer of the mouse cerebellum.

    Science.gov (United States)

    Haldipur, Parthiv; Sivaprakasam, Iswariya; Periasamy, Vinod; Govindan, Subashika; Mani, Shyamala

    2015-05-15

    The plane of division of granule neuron progenitors (GNPs) was analysed with respect to the pial surface in P0 to P14 cerebellum and the results showed that there was a significant bias towards the plane of cell division being parallel to pial surface across this developmental window. In addition, the distribution of β-Catenin in anaphase cells was analysed, which showed that there was a significant asymmetry in the distribution of β-Catenin in dividing GNPs. Further, inhibition of Sonic Hedgehog (Shh) signalling had an effect on plane of cell division. Asymmetric distribution of β-Catenin was shown to occur towards the source of a localized extracellular cue.

  3. Asymmetric cell division of granule neuron progenitors in the external granule layer of the mouse cerebellum

    Directory of Open Access Journals (Sweden)

    Parthiv Haldipur

    2015-07-01

    Full Text Available The plane of division of granule neuron progenitors (GNPs was analysed with respect to the pial surface in P0 to P14 cerebellum and the results showed that there was a significant bias towards the plane of cell division being parallel to pial surface across this developmental window. In addition, the distribution of β-Catenin in anaphase cells was analysed, which showed that there was a significant asymmetry in the distribution of β-Catenin in dividing GNPs. Further, inhibition of Sonic Hedgehog (Shh signalling had an effect on plane of cell division. Asymmetric distribution of β-Catenin was shown to occur towards the source of a localized extracellular cue.

  4. RBP-J is not required for granule neuron progenitor development and medulloblastoma initiated by Hedgehog pathway activation in the external germinal layer

    Directory of Open Access Journals (Sweden)

    Hallahan Andrew R

    2010-10-01

    Full Text Available Abstract Background The Notch signalling pathway plays crucial roles in neural development, functioning by preventing premature differentiation and promotion of glial cell fates. In the developing cerebellum Notch pathway components are expressed in granule neuron progenitors of the external germinal layer (EGL but the precise function of Notch in these cells is unclear. The Hedgehog pathway is also crucial in cerebellar development, mainly via control of the cell cycle, and persistent activation of the pathways leads to the cerebellar tumour medulloblastoma. Interactions between Hedgehog and Notch have been reported in normal brain development as well as in Hedgehog pathway induced medulloblastoma but the molecular details of this interaction are not known and we investigate here the role of Notch signalling in the development of the EGL and the intersection between the two pathways in cerebellar granule neuron progenitors and in medulloblastoma. Results RBP-J is the major downstream effector of all four mammalian Notch receptors and the RBP-J conditional mouse facilitates inactivation of canonical Notch signals. Patched1 is a negative regulator of Hedgehog signalling and the Patched1 conditional mouse is widely used to activate Hedgehog signalling via Patched1 deletion in specific cell types. The conditional mouse lines were crossed with a Math1-Cre line to delete the two genes in granule neuron progenitors from embryonic day 10.5. While deletion of only Patched1 as well as Patched1 together with RBP-J leads to formation of medulloblastoma concomitant with disorganisation of cell layers, loss of RBP-J from granule neuron progenitors has no obvious effect on overall cerebellar morphology or differentiation and maturation of the different cerebellar cell types. Conclusions Our results suggest that even though Notch signalling has been shown to play important roles in cerebellar development, signalling via RBP-J is surprisingly not required in

  5. Enhanced aerobic sludge granulation with layered double hydroxide

    Directory of Open Access Journals (Sweden)

    Jizhi Zhou

    2014-06-01

    Full Text Available Aerobic granular sludge technology has been developed for the biochemical treatment of wastewater in the present study. A fast cultivation of aerobic granular sludge was realized in Sequencing Batch Reactor (SBR, where Mg-Al layered double hydroxide (LDH was used as a carrier for granules growth. In comparison, the sludge particle size with LDH addition was bigger than those without LDH, with more than 50% of compact granular sludge >1.4 mm in size. This indicatestheLDH improved the growth ofthegranular sludge. The frequency of LDH addition had little effect on the granule growth. Moreover, the formation of granules led to the low sludge volume index (SVI and high mixed liquid suspended solids (MLSS in SBR reactor. With the formation of granular sludge, more than 80% of COD was removed in SBR reactor. The high COD removal efficiency of wastewater was observed regardless of various COD loading strength. The results suggest that the growth of granular sludge with LDH as a carrier enhanced the treatment efficiency. Therefore, our results have provided a promising way to prepare the granular sludge for wastewater treatment.

  6. Generalized multi-layered granulations and approximations based on neighborhood systems under incomplete information systems

    Institute of Scientific and Technical Information of China (English)

    HE Ming; FENG Bo-qin

    2005-01-01

    A generalized multi-layered granulation structure used by neighborhood systems is proposed. With granulated views, the concepts of approximations under incomplete information systems are studied, which are represented by covering of the universe. With respect to different levels of granulations, a pair of lower and upper approximations is defined and an approximation structure is investigated, which lead to a more general approximation structure. The generalized multi-layered granulation structure provides a basis of the proposed framework of granular computing. Using this framework, the interesting and useful results about information granulation and approximation reasoning can be obtained. This paper presents some useful explorations about the incomplete information systems from information views.

  7. Dendrodendritic Synapses in the Mouse Olfactory Bulb External Plexiform Layer

    Science.gov (United States)

    Bartel, Dianna L.; Rela, Lorena; Hsieh, Lawrence; Greer, Charles A.

    2014-01-01

    Odor information relayed by olfactory bulb projection neurons, mitral and tufted cells (M/T), is modulated by pairs of reciprocal dendrodendritic synaptic circuits in the external plexiform layer (EPL). Interneurons, which are accounted for largely by granule cells, receive depolarizing input from M/T dendrites and in turn inhibit current spread in M/T dendrites via hyperpolarizing reciprocal dendrodendritic synapses. Because the location of dendrodendritic synapses may significantly affect the cascade of odor information, we assessed synaptic properties and density within sublaminae of the EPL and along the length of M/T secondary dendrites. In electron micrographs the M/T to granule cell synapse appeared to predominate and were equivalent in both the outer and inner EPL. However, the dendrodendritic synapses from granule cell spines onto M/T dendrites, were more prevalent in the outer EPL. In contrast, individual gephyrin-IR puncta, a postsynaptic scaffolding protein at inhibitory synapses used here as a proxy for the granule to M/T dendritic synapse was equally distributed throughout the EPL. Of significance to the organization of intrabulbar circuits, gephyrin-IR synapses are not uniformly distributed along M/T secondary dendrites. Synaptic density, expressed as a function of surface area, increases distal to the cell body. Furthermore, the distributions of gephyrin-IR puncta are heterogeneous and appear as clusters along the length of the M/T dendrites. Consistent with computational models, our data suggest that temporal coding in M/T cells is achieved by precisely located inhibitory input and that distance from the soma is compensated with an increase in synaptic density. PMID:25420934

  8. Characterization of macrophage-like cells in the external layers of human small and large intestine

    DEFF Research Database (Denmark)

    Mikkelsen, H B; Rumessen, J J

    1992-01-01

    -DR-positive (expressing the MHC class-II antigen), in contrast to macrophage-like cells in the subserosa and submucosa. Macrophage-like cells in the external muscle layer were mostly acid phosphatase-negative, and at the electron-microscopic level they were found to have features of macrophages: primary lysosomes, coated...... vesicles and pits. However, very few secondary lysosomes were present. Birbeck granules were not observed. It is concluded that in the external muscle layer of human small and large intestine numerous macrophages of a special type are present. It is discussed whether this cell type plays a role...

  9. Layered growth with bottom-spray granulation for spray deposition of drug.

    Science.gov (United States)

    Er, Dawn Z L; Liew, Celine V; Heng, Paul W S

    2009-07-30

    The gap in scientific knowledge on bottom-spray fluidized bed granulation has emphasized the need for more studies in this area. This paper comparatively studied the applicability of a modified bottom-spray process and the conventional top-spray process for the spray deposition of a micronized drug during granulation. The differences in circulation pattern, mode of growth and resultant granule properties between the two processes were highlighted. The more ordered and consistent circulation pattern of particles in a bottom-spray fluidized bed was observed to give rise to layered granule growth. This resulted in better drug content uniformity among the granule batches and within a granule batch. The processes' sensitivities to wetting and feed material characteristics were also compared and found to differ markedly. Less robustness to differing process conditions was observed for the top-spray process. The resultant bottom-spray granules formed were observed to be less porous, more spherical and had good flow properties. The bottom-spray technique can thus be potentially applied for the spray deposition of drug during granulation and was observed to be a good alternative to the conventional technique for preparing granules.

  10. Thermal delay provided by floors containing layers that incorporate expanded cork granule waste

    OpenAIRE

    Tadeu, A.; Moreira, A.; António, J.; N. Simões; Simões, I.

    2014-01-01

    This paper reports the computation of the thermal delay provided by concrete floors built with layers of cork and lightweight screed that incorporate expanded cork granule waste. The heat transfer by conduction across these multilayer systems is simulated analytically under unsteady boundary conditions. The thermal delay is computed for multilayer concrete floors with varying numbers of layers and layer thicknesses. The mass density and thermal conductivity of the various materials were d...

  11. Status epilepticus increases mature granule cells in the molecular layer of the dentate gyrus in rats

    Institute of Scientific and Technical Information of China (English)

    Zhaoliang Liang; Fei Gao; Fajun Wang; Xiaochen Wang; Xinyu Song; Kejing Liu; Ren-Zhi Zhan

    2013-01-01

    Enhanced neurogenesis in the dentate gyrus of the hippocampus following seizure activity, especially status epilepticus, is associated with ectopic residence and aberrant integration of newborn granule cells. Hilar ectopic granule cells may be detrimental to the stability of dentate circuitry by means of their electrophysiological properties and synaptic connectivity. We hypothesized that status epilepticus also increases ectopic granule cells in the molecular layer. Status epilepticus was induced in male Sprague-Dawley rats by intraperitoneal injection of pilocarpine. Immunostaining showed that many doublecortin-positive cells were present in the molecular layer and the hilus 7 days after the induction of status epilepticus. At least 10 weeks after status epilepticus, the estimated number of cells positive for both prospero homeobox protein 1 and neuron-specific nuclear protein in the hilus was significantly increased. A similar trend was also found in the molecular layer. These findings indicate that status epilepticus can increase the numbers of mature and ectopic newborn granule cells in the molecular layer.

  12. Effect of externally generated turbulence on wave boundary layer

    DEFF Research Database (Denmark)

    Fredsøe, Jørgen; Sumer, B. Mutlu; Kozakiewicz, A.

    2003-01-01

    This experimental study deals with the effect of externally generated turbulence on the oscillatory boundary layer to simulate the turbulence in the wave boundary layer under broken waves in the swash zone. The subject has been investigated experimentally in a U-shaped, oscillating water tunnel...... with a smooth bottom. Turbulence was generated ´externally´ as the flow in the oscillator was passed through a series of grids, that extended from the cover of the water tunnel to about mid-depth. Two different types of grid porosities were used. Direct measurements of the bed shear stress and velocity...... results. The mean and turbulence quantities in the outer flow region are increased substantially with the introduction of the grids. It is shown that the externally generated turbulence is able to penetrate the bed boundary layer, resulting in an increase in the bed shear stress, and therefore...

  13. External foam layers to football helmets reduce head impact severity.

    Science.gov (United States)

    Nakatsuka, Austin S; Yamamoto, Loren G

    2014-08-01

    Current American football helmet design has a rigid exterior with a padded interior. Softening the hard external layer of the helmet may reduce the impact potential of the helmet, providing extra head protection and reducing its use as an offensive device. The objective of this study is to measure the impact reduction potential provided by external foam. We obtained a football helmet with built-in accelerometer-based sensors, placed it on a boxing mannequin and struck it with a weighted swinging pendulum helmet to mimic the forces sustained during a helmet-to-helmet strike. We then applied layers of 1.3 cm thick polyolefin foam to the exterior surface of the helmets and repeated the process. All impact severity measures were significantly reduced with the application of the external foam. These results support the hypothesis that adding a soft exterior layer reduces the force of impact which may be applicable to the football field. Redesigning football helmets could reduce the injury potential of the sport.

  14. External quality assessment of platelet disorder investigations: results of international surveys on diagnostic tests for dense granule deficiency and platelet aggregometry interpretation.

    Science.gov (United States)

    Hayward, Catherine P M; Moffat, Karen A; Plumhoff, Elizabeth; Timleck, Marnie; Hoffman, Suzanne; Spitzer, Ernie; Van Cott, Elizabeth M; Meijer, Piet

    2012-09-01

    The quality of platelet aggregation and dense granule deficiency testing is important for diagnosing platelet function disorders. After a successful pilot exercise on diagnosing platelet dense granule deficiency by electron microscopy (EM), the North American Specialized Coagulation Laboratory Association (NASCOLA) has launched regular external quality assurance (EQA) for dense granule EM, as well as for the interpretation of platelet aggregation findings. EQA records were analyzed to assess performance. For EM EQA, between 2009 and 2011, there was excellent performance in distinguishing normal from dense granule-deficient samples and good (>70%) agreement on classifying most electron dense structures in platelets. For aggregation EQA, some normal variants were misclassified and overall case interpretations were more acceptable for rare disorders than for common findings. NASCOLA experiences with these EQAs indicate that there is a need to improve the quality of platelet disorder evaluations. For aggregometry interpretations, deficits in performance could be addressed by translating guideline recommendations into practice.

  15. In situ analyses of gallstone inner layers by external PIXE

    Science.gov (United States)

    Rautray, Tapash R.; Dutta, Koushik; Das, Saubhagya L.; Rautray, Alekh C.

    2010-09-01

    External proton induced X-ray emission analyses were carried out to study the elemental profile at different points of two mixed gallstones inner layers. It was observed that ten minor/trace elements namely P, S, Ca, Mn, Fe, Cu, Zn, Br, Rb and Sr were present in the mixed gallstone layers. Among the elements detected, Ca shows the highest concentration whereas Br, Rb and Sr were found only at some points in trace level. Concentrations of Ca and P were observed to be the highest in the core of the gallstones. The presence of high amount of Cu and Zn on the surface of the gallstones, as compared to other layers, may be due to contamination with bile.

  16. In situ analyses of gallstone inner layers by external PIXE

    Energy Technology Data Exchange (ETDEWEB)

    Rautray, Tapash R., E-mail: tapash77@hotmail.co [Department of Dental Biomaterials, School of Dentistry, Kyungpook National University, 2-188-1 Samduk-dong, Jung-gu, Daegu (Korea, Republic of); Institute of Physics, Sachivalaya Marg, Bhubaneswar 751005 (India); ARASMIN, G. Udayagiri, Kandhamal, Orissa 762100 (India); Dutta, Koushik; Das, Saubhagya L. [Institute of Physics, Sachivalaya Marg, Bhubaneswar 751005 (India); Rautray, Alekh C. [ARASMIN, G. Udayagiri, Kandhamal, Orissa 762100 (India)

    2010-09-15

    External proton induced X-ray emission analyses were carried out to study the elemental profile at different points of two mixed gallstones inner layers. It was observed that ten minor/trace elements namely P, S, Ca, Mn, Fe, Cu, Zn, Br, Rb and Sr were present in the mixed gallstone layers. Among the elements detected, Ca shows the highest concentration whereas Br, Rb and Sr were found only at some points in trace level. Concentrations of Ca and P were observed to be the highest in the core of the gallstones. The presence of high amount of Cu and Zn on the surface of the gallstones, as compared to other layers, may be due to contamination with bile.

  17. The effects of external conditions in turbulent boundary layers

    Science.gov (United States)

    Brzek, Brian G.

    The effects of multiple external conditions on turbulent boundary layers were studied in detail. These external conditions include: surface roughness, upstream turbulence intensity, and pressure gradient. Furthermore, the combined effects of these conditions show the complicated nature of many realistic flow conditions. It was found that the effects of surface roughness are difficult to generalize, given the importance of so many parameters. These parameters include: roughness geometry, roughness regime, roughness height to boundary layer thickness, (k/delta), roughness parameter, ( k+), Reynolds number, and roughness function (Delta B+). A further complication, is the difficulty in computing the wall shear stress, tauw/rho. For the sand grain type roughness, the mean velocity and Reynolds stresses were studied in inner and outer variables, as well as, boundary layer parameters, anisotropy tensor, production term, and viscous stress and form drag contributions. To explore the effects of roughness and Reynolds number dependence in the boundary layer, a new experiment was carefully designed to properly capture the x-dependence of the single-point statistics. It was found that roughness destroys the viscous layer near the wall, thus, reducing the contribution of the viscous stress in the wall region. As a result, the contribution in the skin friction due to form drag increases, while the viscous stress decreases. This yields Reynolds number invariance in the skin friction, near-wall roughness parameters, and inner velocity profiles as k + increases into the fully rough regime. However, in the transitionally rough regime, (i.e., 5 component shows the largest influence of roughness, where the high peak near the wall was decreased and became nearly flat for the fully rough regime profiles. In addition, the Reynolds stresses in outer variables show self-similarity for fixed experimental conditions. However, as the roughness parameter, k +, increases, all Reynolds stress

  18. Investigation of the Temperature Field of Coolant in the Installations for Obtaining 3D Nanostructured Porous Surface Layer on the Granules of Ammonium Nitrate

    Directory of Open Access Journals (Sweden)

    A.E. Artyukhov

    2017-02-01

    Full Text Available The paper is devoted to the study of thermodynamic indicators of the granulator’s work and intensity of directed vortex motion of heat transfer agent influence on structure and quality of porous surface layer of ammonium nitrate granules. Field heat transfer agent temperature in time in vortex granulator was obtained. The results of heat transfer agent temperatures fields at different its circumferential speed (spin degree study are presented. The surface structure granules obtained in the vortex gas flow with different spins intensities was studied. The obtained findings are base for vortex granulators engineering calculation technique development in the composition of devices for producing of 3-D nanostructured porous surface layer on ammonium nitrate granule.

  19. Bending of Layer-by-Layer Films Driven by an External Magnetic Field

    Directory of Open Access Journals (Sweden)

    Osvaldo N. Oliveira Jr.

    2013-06-01

    Full Text Available We report on optimized architectures containing layer-by-layer (LbL films of natural rubber latex (NRL, carboxymethyl-chitosan (CMC and magnetite (Fe3O4 nanoparticles (MNPs deposited on flexible substrates, which could be easily bent by an external magnetic field. The mechanical response depended on the number of deposited layers and was explained semi-quantitatively with a fully atomistic model, where the LbL film was represented as superposing layers of hexagonal graphene-like atomic arrangements deposited on a stiffer substrate. The bending with no direct current or voltage being applied to a supramolecular structure containing biocompatible and antimicrobial materials represents a proof-of-principle experiment that is promising for tissue engineering applications in biomedicine.

  20. Improved Light Conversion Efficiency Of Dye-Sensitized Solar Cell By Dispersing Submicron-Sized Granules Into The Nano-Sized TiO2 Layer

    Directory of Open Access Journals (Sweden)

    Song S.A.

    2015-06-01

    Full Text Available In this work, TiO2 nanoparticles and submicron-sized granules were synthesized by a hydrothermal method and spray pyrolysis, respectively. Submicron-sized granules were dispersed into the nano-sized TiO2 layer to improve the light conversion efficiency. Granules showed better light scattering, but lower in terms of the dye-loading quantity and recombination resistance compared with nanoparticles. Consequently, the nano-sized TiO2 layer had higher cell efficiency than the granulized TiO2 layer. When dispersed granules into the nanoparticle layer, the light scattering was enhanced without the loss of dye-loading quantities. The dispersion of granulized TiO2 led to increase the cell efficiency up to 6.51%, which was about 5.2 % higher than that of the electrode consisting of only TiO2 nanoparticles. Finally, the optimal hydrothermal temperature and dispersing quantity of granules were found to be 200°C and 20 wt%, respectively.

  1. External serial connection without layer patterning for organic solar cells

    Science.gov (United States)

    Wong, Ying Qian; Wong, Hin Yong; Tan, Ching Seong; Meng, Hsin-Fei

    2016-12-01

    This paper proposes a novel alternative to conventional internal serial connection, where precise patterning and scribing of organic layers can be eliminated. Adjacent cells can be made nearer for better space-utilization and higher voltages per unit area. Also, blade coating is proposed as the fabrication method as it has low material wastage (less than 5%), easily scalable to large area, has high film uniformity and has high throughput due to its roll-to-roll potential. This paper demonstrates 3-cells large area (12.98 cm2) external serial connection organic solar cells (OSCs) using the material poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) and 2,6-Bis(trimethyltin)-4, 8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo [1,2-b:4,5-b']dithiophene:6,6-phenyl C71-butyric acid methyl ester (PBDTTT-CT:PC71BM) respectively. The power conversion efficiencies (PCEs) of the resulting 3-cells modules are 2.0% and 4.1% respectively.

  2. Developmental analysis of the external granular layer in the meander tail mutant mouse: do cerebellar microneurons have independent progenitors?

    Science.gov (United States)

    Napieralski, J A; Eisenman, L M

    1993-08-01

    The cerebellum of the meander tail mutant mouse (mea/mea) is characterized by an apparently normal cytoarchitecture posteriorly with an abrupt transition to an abnormal anterior region. Anteriorly, there is abnormal foliation, a drastic reduction in the granule cells (GC) population, disorganization of the Purkinje cells (PC), and a virtual absence of Bergmann glial processes. In this paper we analyze the prenatal and postnatal development of the cerebellum in the mea/mea and attempt to determine the phenotypic onset of the mutation in the anterior region. Hematoxylin and eosin stained sections reveal a morphological difference in the cerebellum of the mea/mea as early as embryonic day 16 characterized by a reduction in the external granule cell layer (EGL). The reduction in the EGL becomes increasingly apparent as development proceeds. This deficit in the EGL most probably results in the absence of GC, but it is unclear at this point whether reduced migration, proliferation, and/or increased cell death is the major factor. Interestingly, immunohistochemical staining with a monoclonal antibody against parvalbumin reveals that the basket and stellate cells, which are also thought to arise from the EGL, are present in the anterior region of the mea/mea cerebellum. These results suggest that the lack of GC in the meander tail is due to an early expressed abnormality of the EGL. However, the presence of the basket and/or stellate cells raises some interesting questions concerning the lineage of the cerebellar microneurons.

  3. Performance of double-layer biofilter packed with coal fly ash ceramic granules in treating highly polluted river water.

    Science.gov (United States)

    Jing, Zhaoqian; Li, Yu-You; Cao, Shiwei; Liu, Yuyu

    2012-09-01

    To improve trickling filters' denitrification efficiency, a biofilter with a trickling upper layer and a submerged lower layer was developed and applied in treating highly polluted river water. It was packed with porous coal fly ash ceramic granules. Its start-up characteristics, influence of hydraulic loading rates (HLR), carbon/nitrogen (C/N) ratio and filter depth on pollutants removal were investigated. The results indicated this biofilter was started quickly in 16 days with river sediment as inoculum. Alternating nitrification and denitrification were achieved when water flowed downwards. COD and nitrogen were mainly removed in the upper layer and the lower layer, respectively. With HLR of 4.0-5.0m(3)/(m(2)d), chemical oxygen demand (COD), ammonium (NH(4)(+)-N) and total nitrogen (TN) in the effluent were below 50, 5 and 15 mg/L, respectively. This biofilter removed more than 80% of COD, 85% of NH(4)(+)-N and 60% of TN with C/N ratios ranging from 6 to 10.

  4. Analysis of Air Flow in the Ventilated Insulating Air Layer of the External Wall

    Science.gov (United States)

    Katunská, Jana; Bullová, Iveta; Špaková, Miroslava

    2016-12-01

    The paper deals with problems of impact of air flow in ventilated insulating air layer of the external wall on behaviour of thermal-technical parameters of the proposed external structure (according principles of STN 73 0549, which is not valid now), by comparing them in the calculation according to the valid STN standards, where air flow in the ventilated air layer is not taken into account, as well as by comparing them with behavior of thermal-technical parameters in the proposal of sandwich external wall with the contact heat insulation system without air cavity.

  5. Effect of externality in multiplex networks on one-layer synchronization

    Science.gov (United States)

    Jiang, Xin; Li, Meng; Zheng, Zhiming; Ma, Yifang; Ma, Lili

    2015-06-01

    Synchronization phenomenon plays an important role in the dynamic process on complex networks. In this letter, we consider synchronization under multiplex structures and explore the effect of external parts on the multilayered Kuramoto model with positive correlation between frequencies and degree. We show that large and strong mixing parts of the external layer may put off synchronization while the coupling strength of external layers has an accelerating, but limited, influence on synchronization. In particular, an explosive synchronization can be obtained by weakening the co-evolution coupling strength. The transition tends to be smooth when the co-evolution coupling strength increases. Our findings indicate that externality from multiplex networks, especially the mixing parts, and the co-evolution coupling strength should be of importance for synchronization on one certain layer.

  6. RNA granules

    OpenAIRE

    Anderson, Paul; Kedersha, Nancy

    2006-01-01

    Cytoplasmic RNA granules in germ cells (polar and germinal granules), somatic cells (stress granules and processing bodies), and neurons (neuronal granules) have emerged as important players in the posttranscriptional regulation of gene expression. RNA granules contain various ribosomal subunits, translation factors, decay enzymes, helicases, scaffold proteins, and RNA-binding proteins, and they control the localization, stability, and translation of their RNA cargo. We review the relationshi...

  7. External Quantum Efficiency Improvement with Luminescent Downshifting Layers: Experimental and Modelling

    OpenAIRE

    Ahmed, H.; S. J. McCormack; Doran, J.

    2016-01-01

    Core-shell quantum dots CdSe/ZnS and lumogen yellow organic dye are characterized by their inclusion in luminescent downshifting (LDS) layers. Layers were deposited on top of crystalline silicon cell (c-Si), dye synthesized solar cell (DSSC), and cadmium telluride (CdTe) minimodules. External quantum efficiency measurements for the solar cell/LDS devices are discussed. Experimental results were compared with an optical model developed by Rothemund, 2014.

  8. External Quantum Efficiency Improvement with Luminescent Downshifting Layers: Experimental and Modelling

    Directory of Open Access Journals (Sweden)

    H. Ahmed

    2016-01-01

    Full Text Available Core-shell quantum dots CdSe/ZnS and lumogen yellow organic dye are characterized by their inclusion in luminescent downshifting (LDS layers. Layers were deposited on top of crystalline silicon cell (c-Si, dye synthesized solar cell (DSSC, and cadmium telluride (CdTe minimodules. External quantum efficiency measurements for the solar cell/LDS devices are discussed. Experimental results were compared with an optical model developed by Rothemund, 2014.

  9. Amylase activity in substrate deficiency aerobic granules.

    Science.gov (United States)

    Lee, Chuen-Chi; Lee, Duu-Jong; Lai, Juin-Yih

    2009-01-01

    Immunohistochemical staining was applied together with the multicolor fluorescent scheme to demonstrate the amylase activity for polysaccharide hydrolysis in stored or starved aerobic granules that are in substrate deficiency. If sufficient nutrients were present, alpha-amylase and beta-amylase were found close to the surface layer of the original granules. Following storage or starvation during which most external nutrients were depleted, the alpha-amylase and beta-amylase were distributed over the entire granule interior, suggesting endogenous respiration at the core of the granule. In particular, the fluorescent intensities of alpha-amylase and beta-amylase were enriched 5-20 microm from the edge of the internal cavity, suggesting the strong correlation between polysaccharide hydrolysis and the formation of interior cavities. The secreted amylase was located near the living cells, suggesting that the polysaccharide hydrolysis is restricted to local environment that occurs near the functional strains. Internal hydrolysis within the core, for the case of both proteins and polysaccharides should correspond in principle to the loss of granule stability.

  10. Effect of buffer layer and external stress on magnetic properties of flexible FeGa films

    Science.gov (United States)

    Zhang, Xiaoshan; Zhan, Qingfeng; Dai, Guohong; Liu, Yiwei; Zuo, Zhenghu; Yang, Huali; Chen, Bin; Li, Run-Wei

    2013-05-01

    We systematically investigated the effect of a Ta buffer layer and external stress on the magnetic properties of magnetostrictive Fe81Ga19 films deposited on flexible polyethylene terephthalate (PET) substrates. The Ta buffer layers could effectively smoothen the rough surface of PET. As a result, the FeGa films grown on Ta buffer layers exhibit a weaker uniaxial magnetic anisotropy and lower coercivity, as compared to those films directly grown on PET substrates. By inward and outward bending the FeGa/Ta/PET samples, external in-plane compressive and tensile stresses were applied to the magnetic films. Due to the inverse magnetostrictive effect of FeGa, both the coercivity and squareness of hysteresis loops for FeGa/Ta films could be well tuned under various strains.

  11. Prenatal exposure to bisphenol A interferes with the development of cerebellar granule neurons in mice and chicken.

    Science.gov (United States)

    Mathisen, Gro H; Yazdani, Mazyar; Rakkestad, Kirsten E; Aden, Petra K; Bodin, Johanna; Samuelsen, Mari; Nygaard, Unni C; Goverud, Ingeborg L; Gaarder, Mona; Løberg, Else Marit; Bølling, Anette K; Becher, Rune; Paulsen, Ragnhild E

    2013-12-01

    In mice, prenatal exposure to low doses of bisphenol A has been shown to affect neurogenesis and neuronal migration in cortex, resulting in disturbance of both neuronal positioning and the network formation between thalamus and cortex in the offspring brain. In the present study we investigated whether prenatal exposure to bisphenol A disturbs the neurodevelopment of the cerebellum. Two different model systems were used; offspring from two strains of mice from mothers receiving bisphenol A in the drinking water before mating, during gestation and lactation, and chicken embryos exposed to bisphenol A (in the egg) on embryonic day 16 for 24h before preparation of cerebellar granule cell cultures. In the cerebellum, tight regulation of the level of transcription factor Pax6 is critical for correct development of granule neurons. During the development, the Pax6 level in granule neurons is high when these cells are located in the external granule layer and during their migration to the internal granule layer, and it is then reduced. We report that bisphenol A induced an increase in the thickness of the external granule layer and also an increase in the total cerebellar Pax6 level in 11 days old mice offspring. In cultured chicken cerebellar granule neurons from bisphenol A injected eggs the Pax6 level was increased day 6 in vitro. Together, these findings indicate that bisphenol A may affect the granule neurons in the developing cerebellum and thereby may disturb the correct development of the cerebellum.

  12. Numerical evaluation of external magnetic effect on electromagnetic wave transmission through reentry plasma layer

    Science.gov (United States)

    Zhao, Qing; Bo, Yong; Lei, Mingda; Liu, Shuzhang; Liu, Ying; Liu, Jianwei; Zhao, Yizhe

    2016-11-01

    Numerical study of electromagnetic (EM) wave transmission through the magnetized plasma layer is presented in this paper. The plasma parameters are derived from computational fluid dynamics simulation of the flow field around a blunt body flying at supersonic speed and serve as the background plasma condition in the numerical modeling for EM wave transmission. The EM wave is generated by our newly designed coaxial feed GPS patch antenna. The external magnetic field is applied and assumed to vary linearly as a function of wall distance. The effects of the external applied magnetic field and the plasma parameters on wave transmission are studied, and the results show that EM wave propagation in the non-uniformly magnetized plasma is a matter of impedance matching, and the EM wave transmission can be adjusted only when the proper strength of the magnetic field is applied.

  13. Similarity Solutions of Marangoni Convection Boundary Layer Flow with Gravity and External Pressure

    Institute of Scientific and Technical Information of China (English)

    张艳; 郑连存

    2014-01-01

    This study is focused on a steady dissipative layer, which is generated by Marangoni convection flow over the surface resulted from an imposed temperature gradient, coupled with buoyancy effects due to gravity and external pressure. A model is proposed with Marangoni condition in the boundary conditions at the interface. The similarity equations are determined and approximate analytical solutions are obtained by an efficient transformation, asymptotic expansion and Padé approximant technique. For the cases that buoyancy force is favorable or unfavor-able to Marangoni flow, the features of flow and temperature fields are investigated in terms of Marangoni mixed convection parameter and Prantl number.

  14. Effect of the External Lubrication Method for a Rotary Tablet Press on the Adhesion of the Film Coating Layer.

    Science.gov (United States)

    Kondo, Hisami; Toyota, Hiroyasu; Kamiya, Takayuki; Yamashita, Kazunari; Hakomori, Tadashi; Imoto, Junko; Kimura, Shin-Ichiro; Iwao, Yasunori; Itai, Shigeru

    2017-01-01

    External lubrication is a useful method which reduces the adhesion of powder to punches and dies by spraying lubricants during the tableting process. However, no information is available on whether the tablets prepared using an external lubrication system can be applicable for a film coating process. In this study, we evaluated the adhesion force of the film coating layer to the surface of tablets prepared using an external lubrication method, compared with those prepared using internal lubrication method. We also evaluated wettability, roughness and lubricant distribution state on the tablet surface before film coating, and investigated the relationship between peeling of the film coating layer and these tablet surface properties. Increasing lubrication through the external lubrication method decreased wettability of the tablet surface. However, no change was observed in the adhesion force of the film coating layer. On the other hand, increasing lubrication through the internal lubrication method, decreased both wettability of the tablet surface and the adhesion force of the film coating layer. The magnesium stearate distribution state on the tablet surface was assessed using an X-ray fluorescent analyzer and lubricant agglomerates were observed in the case of the internal lubrication method. However, the lubricant was uniformly dispersed in the external lubrication samples. These results indicate that the distribution state of the lubricant affects the adhesion force of the film coating layer, and external lubrication maintained sufficient lubricity and adhesion force of the film coating layer with a small amount of lubricant.

  15. Granulated wood ash to forest soils. Effects on microorganisms, phosphorus availability, and spatial relationships in the humus layer; Granulerad vedaska till skog paa fastmark. Paaverkan paa fosfortillgaang, mikroorganismer och rumsliga variationsmoenster

    Energy Technology Data Exchange (ETDEWEB)

    Clarholm, Marianne [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Forest Mycology and Pathology

    1999-07-01

    microbial biomass, where fungi were responsible for the increases. Fungal hyphae formed 'cups' around the lower parts of the ash granules, when the moisture situation was favourable, but when the possibility of weathering was investigated by measuring pH under the granules after three years in the field, no decreases was found except in an ammonium sulphate treatment (NS) were no hyphal 'cups' had developed. The. hyphae making up the 'cups' will gather cations leached from the granules. In a study in Torup where 51 soil cores were taken 0.5 m apart in three transects, addition of 3 and 6 t of ash caused significantly increased standard respiration in samples from the upper half of the humus layer four years after addition, without changes in pH. Geostatistical analyses of spatial variation indicated that for respiration, acid phosphatase activity and conductivity, the ash addition in Torup had changed the pattern from one typical for a situation where there is a high external influence and characteristic for Swedish high deposition areas, to another pattern typical for Swedish humus layers of forests less exposed to deposition. The change in pattern was most obvious in the 3 t ash treatment, in the pattern for the 6 t treatment there was again a tendency for an external influence, possibly from the ash. Three tonnes of granulated wood ash were judged as a more suitable dose for soil remediation than six tonnes. Addition of wood ash to a forest floor can be seen as soil remediation and such a treatment can make up for losses of cations from lower soil layers in areas with high deposition. However, Sweden's forests mostly stand on young unweathered bedrock and have large amounts of nutrients stored in the organic forest floor, which can be mobilised when needed. To return P and cations in amounts equivalent to those exported in harvest and to match N added as deposition is not necessary at present to secure sustained tree growth in the next

  16. Granulated wood ash to forest soils. Effects on microorganisms, phosphorus availability, and spatial relationships in the humus layer; Granulerad vedaska till skog paa fastmark. Paaverkan paa fosfortillgaang, mikroorganismer och rumsliga variationsmoenster

    Energy Technology Data Exchange (ETDEWEB)

    Clarholm, Marianne [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Forest Mycology and Pathology

    1999-07-01

    microbial biomass, where fungi were responsible for the increases. Fungal hyphae formed 'cups' around the lower parts of the ash granules, when the moisture situation was favourable, but when the possibility of weathering was investigated by measuring pH under the granules after three years in the field, no decreases was found except in an ammonium sulphate treatment (NS) were no hyphal 'cups' had developed. The. hyphae making up the 'cups' will gather cations leached from the granules. In a study in Torup where 51 soil cores were taken 0.5 m apart in three transects, addition of 3 and 6 t of ash caused significantly increased standard respiration in samples from the upper half of the humus layer four years after addition, without changes in pH. Geostatistical analyses of spatial variation indicated that for respiration, acid phosphatase activity and conductivity, the ash addition in Torup had changed the pattern from one typical for a situation where there is a high external influence and characteristic for Swedish high deposition areas, to another pattern typical for Swedish humus layers of forests less exposed to deposition. The change in pattern was most obvious in the 3 t ash treatment, in the pattern for the 6 t treatment there was again a tendency for an external influence, possibly from the ash. Three tonnes of granulated wood ash were judged as a more suitable dose for soil remediation than six tonnes. Addition of wood ash to a forest floor can be seen as soil remediation and such a treatment can make up for losses of cations from lower soil layers in areas with high deposition. However, Sweden's forests mostly stand on young unweathered bedrock and have large amounts of nutrients stored in the organic forest floor, which can be mobilised when needed. To return P and cations in amounts equivalent to those exported in harvest and to match N added as deposition is not necessary at present to secure sustained tree growth in the next

  17. Effective observation on treating impetigo in neonates by external washing withTCM granule%中药颗粒剂外洗治疗新生儿脓疱疹疗效观察

    Institute of Scientific and Technical Information of China (English)

    林晓燕; 徐佳君

    2016-01-01

    Objective: To observe the effcacy of external washing with TCM granule on impetigo in neonates. Methods: 120 cases of impetigo in neonates were randomly divided into two groups (each group for 60 cases). The control group were treated with mupirocin ointment after bathing with warm water; the treatment group were treated with mupirocin ointment after bathing with TCM granule. The curative effcacy in two groups were recorded. Results: The difference of total effciency was statistically signiifcant between two groups. Conclusion: External washing with TCM granule plus mupirocin ointment on impetigo in neonates has a good effect, and were better than bathing with warm water plus mupirocin ointment.%目的:观察中药颗粒剂外洗治疗新生儿脓疱疹的临床效果。方法:将120例新生儿脓疱疹患儿随机分为对照组和治疗组。对照组60例常规温水洗澡后予外涂莫匹罗星软膏治疗。治疗组60例用中药颗粒剂外洗后联合莫匹罗星软膏外涂治疗。观察两组的疗效。结果:治疗组总有效率与对照组比较,差异有统计学意义(P<0.05)。结论:中药颗粒剂外洗联合莫匹罗星软膏外涂治疗新生儿脓疱疮效果好,优于常规温水洗澡后外涂莫匹罗星软膏治疗。

  18. Ectopic overexpression of engrailed-2 in cerebellar Purkinje cells causes restricted cell loss and retarded external germinal layer development at lobule junctions.

    Science.gov (United States)

    Baader, S L; Sanlioglu, S; Berrebi, A S; Parker-Thornburg, J; Oberdick, J

    1998-03-01

    Members of the En and Wnt gene families seem to play a key role in the early specification of the brain territory that gives rise to the cerebellum, the midhindbrain junction. To analyze the possible continuous role of the En and Wnt signaling pathway in later cerebellar patterning and function, we expressed En-2 ectopically in Purkinje cells during late embryonic and postnatal cerebellar development. As a result of this expression, the cerebellum is greatly reduced in size, and Purkinje cell numbers throughout the cerebellum are reduced by more than one-third relative to normal animals. Detailed analysis of both adult and developing cerebella reveals a pattern of selectivity to the loss of Purkinje cells and other cerebellar neurons. This is observed as a general loss of prominence of cerebellar fissures that is highlighted by a total loss of sublobular fissures. In contrast, mediolateral patterning is generally only subtly affected. That En-2 overexpression selectively affects Purkinje cells in the transition zone between lobules is evidenced by direct observation of selective Purkinje cell loss in certain fissures and by the observation that growth and migration of the external germinal layer (EGL) is selectively retarded in the deep fissures during early postnatal development. Thus, in addition to demonstrating the critical role of Purkinje cells in the generation and migration of granule cells, the heterogeneous distribution of cellular effects induced by ectopic En expression suggests a relatively late morphogenetic role for this and other segment polarity proteins, mainly oriented at lobule junctions.

  19. Morphological alterations in newly born dentate gyrus granule cells that emerge after status epilepticus contribute to make them less excitable.

    Directory of Open Access Journals (Sweden)

    Julián Tejada

    Full Text Available Computer simulations of external current stimulations of dentate gyrus granule cells of rats with Status Epilepticus induced by pilocarpine and control rats were used to evaluate whether morphological differences alone between these cells have an impact on their electrophysiological behavior. The cell models were constructed using morphological information from tridimensional reconstructions with Neurolucida software. To evaluate the effect of morphology differences alone, ion channel conductances, densities and distributions over the dendritic trees of dentate gyrus granule cells were the same for all models. External simulated currents were injected in randomly chosen dendrites belonging to one of three different areas of dentate gyrus granule cell molecular layer: inner molecular layer, medial molecular layer and outer molecular layer. Somatic membrane potentials were recorded to determine firing frequencies and inter-spike intervals. The results show that morphologically altered granule cells from pilocarpine-induced epileptic rats are less excitable than control cells, especially when they are stimulated in the inner molecular layer, which is the target area for mossy fibers that sprout after pilocarpine-induced cell degeneration. This suggests that morphological alterations may act as a protective mechanism to allow dentate gyrus granule cells to cope with the increase of stimulation caused by mossy fiber sprouting.

  20. Drag reduction for external and internal boundary layers using riblets and polymers

    Science.gov (United States)

    Reidy, Laurel W.; Anderson, Greg W.

    1988-01-01

    The efficiency of riblets and a drag-reducing polymer solution (a polyacrylamide slurry) in high-speed water tunnels for reducing drag in turbulent boundary layers was investigated in two experiments. One was an external flow experiment, in which riblets were applied to a flat plate in a high-speed water tunnel and the skin friction drag was calculated from velocity profile data. The second was an internal flow experiment, in which riblets were applied to the inside of a 6-in diameter pipe and the friction factor was calculated from mass flow rate and pressure drop measurements. Both experiments used adhesive-backed vinyl riblet film with 0.003-in height and spacing of the symmetric V-grooves. For the flat plate test, free stream velocity and Re data indicated a maximum drag reduction of about 8.1 percent. With riblets in the pipe, however, there was about three times as much friction reduction. When the polymer slurry was used in conjunction with riblets in the pipe flow, the total drag reduction was approximately equal to the sum of the drag reductions of the two techniques used separately, with some dependence on Reynolds number.

  1. The research and preparation of a bi-layer biodegradable external sheath with directional drug release profiles for vein graft

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Zhenjie, E-mail: lawson3001@gmail.com [Department of Surgery, Sir Run Run Shaw Hospital, Zhejiang University, Hangzhou (China); Institute of Vascular Surgery, Fudan University, Shanghai (China); Department of Surgery, University of Wisconsin-Madison, WI (United States); Guo, Zhenying [Department of Pathology, Zhejiang Cancer Hospital, Hangzhou (China); Si, Yi [Department of Surgery, University of Wisconsin-Madison, WI (United States); Zhang, Xiangman; Shi, Zhenyu [Institute of Vascular Surgery, Fudan University, Shanghai (China); Chen, Feng [College of Chemical Engineering and Material Science, Zhejiang University of Technology, Hangzhou (China); Fu, Weiguo [Institute of Vascular Surgery, Fudan University, Shanghai (China)

    2013-11-01

    External sheath has been suggested for autologous vein grafts to inhibit neointimal hyperplasia and prevent anastomosis stricture. In this study, we prepared a bi-layer biodegradable paclitaxel-loaded sheaths with a synthetic copolymer poly(ethylene carbonate-ε-caprolactone) at room temperature. The bi-layer drug release profiles of the Paclitaxel-loaded (PTX-loaded) sheath significantly slow down the paclitaxel (PTX) release rates and result in a directional drug release way. Moreover, the nanofibrous layer of PTX-loaded poly(EC-CL) sheaths reduced the cytotoxicity and provided a better support for fibroblast adhesion and proliferation than the PTX-loaded layer of the sheaths. Thus, this study demonstrates that the bi-layer PTX-loaded poly(EC-CL) sheath with directional drug release profiles have a promising application for vein graft to against neointimal hyperplasia and anastomotic stricture.

  2. Propofol enhances facial stimulation-evoked responses in the cerebellar granule cell layer via NMDA receptor activation in mice in vivo.

    Science.gov (United States)

    Jin, Wen-Zhe; Liu, Heng; Wan, Peng; Chu, Chun-Ping; Qiu, De-Lai

    2016-10-05

    We recently reported that propofol depressed facial stimulation-evoked gamma-aminobutyric acid (GABA) transmission at cerebellar molecular layer interneuron-Purkinje cell (PC) synapses in mice in vivo, but facilitated excitatory parallel fiber inputs onto PCs. Here, we examine the effects of propofol on cerebellar granule cell layer (GCL) responses to facial stimulation in urethane-anesthetized mice, using electrophysiological and pharmacological methods. Cerebellar surface perfusion of propofol (50-1000μM) facilitated field potentials evoked in the cerebellar GCL by air-puff stimulation of the ipsilateral whisker pad, shown by increases in the half-width and area under the curve (AUC) of the stimulus onset response (Ron). Propofol also significantly increased the amplitude of the stimulus offset response (Roff) and Roff/Ron ratio. The propofol-induced increase in Ron AUC was dose-dependent, with a 50% effective concentration (EC50) of 242.4µM. Application of the GABAA receptor antagonist gabazine (20μM) significantly increased the amplitude, half-width, rise tau and AUC of Ron, but these parameters were further increased by additional application of propofol (300µM). Notably, application of the N-methyl-d-aspartate (NMDA) receptor blocker D-APV (250µM) significantly attenuated the half-width and AUC of Ron and the amplitude of Roff, without significantly changing the amplitude of Ron. These results indicate that propofol enhanced facial stimulation-evoked responses in the cerebellar GCL via NMDA receptor activation, which resulted in the facilitation of excitatory parallel fiber inputs onto cerebellar PCs in mice in vivo. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Twin screw granulation: steps in granule growth.

    Science.gov (United States)

    Dhenge, Ranjit M; Cartwright, James J; Hounslow, Michael J; Salman, Agba D

    2012-11-15

    The present work focuses on the study of the progression of granules in different compartments along the length of screws in a twin screw granulator (TSG). The effects of varying powder feed rate; liquid to solid ratio and viscosity of granulation liquid on properties of granules was studied. The bigger granules produced at the start of the process were found to change in terms of size, shape and strength along the screw length at all the conditions investigated. The granules became more spherical and their strength increased along the screw length. Tracer granules were also introduced in order to understand the role of kneading and conveying elements in the TSG. The kneading elements promoted consolidation and breakage while the conveying elements led to coalescence, breakage and some consolidation. The results presented here help to provide a qualitative and quantitative understanding of the twin screw granulation process.

  4. The use of the external layer of the calvaria's frontal bone to repair craniofacial skeleton injuries in Macaca mulatta (Rhesus

    Directory of Open Access Journals (Sweden)

    Camelo-Nunes José Mário

    2003-01-01

    Full Text Available PURPOSE: To study the integration of the external layer of the calvaria's frontal bone to repair craniofacial skeleton injuries in primates. METHODS: Ten Rhesus monkeys underwent surgery in two stages. In the first stage, four bone fragments were harvested from the external layer of the calvaria's frontal bone and were transplanted two on the calvaria's frontal bone and the other two onto the maxillary bone, by onlay and inlay. Seven weeks thereafter, four fragments were extracted from the transplantated area. The animals were not sacrificed. RESULTS: Macroscopic examination reveals bone regeneration, the areas onto which the bone fragments were transplantated having consequently increased in volume. The results of optical and electron microscopy is being carried out.

  5. Segmental identity and cerebellar granule cell induction in rhombomere 1

    Directory of Open Access Journals (Sweden)

    Bell Esther

    2004-06-01

    Full Text Available Abstract Background Cerebellar granule cell precursors are specifically generated within the hindbrain segment, rhombomere 1, which is bounded rostrally by the midbrain/hindbrain isthmus and caudally by the boundary of the Hoxa2 expression domain. While graded signals from the isthmus have a demonstrable patterning role within this region, the significance of segmental identity for neuronal specification within rhombomere 1 is unexplored. We examined the response of granule cell precursors to the overexpression of Hoxa2, which normally determines patterns of development specific to the hindbrain. How much does the development of the cerebellum, a midbrain/hindbrain structure, reflect its neuromeric origin as a hindbrain segment? Results We show that a Gbx2-positive, Otx2-/Hoxa2-negative territory corresponding to rhombomere 1 forms prior to an identifiable isthmic organiser. Early global overexpression of Hoxa2 at embryonic day 0 has no effect on the expression of isthmic signalling molecules or the allocation of rhombomere 1 territory, but selectively results in the loss of granule cell markers at embryonic day 6 and the depletion of cell bodies from the external granule cell layer. By comparison the trochlear nucleus and locus coeruleus form normally in ventral rhombomere 1 under these conditions. Microsurgery, coupled with electroporation, to target Hoxa2 overexpression to rhombic lip precursors, reveals a profound, autonomous respecification of migration. Rhombic lip derivatives, normally destined to occupy the external granule cell layer, violate the cerebellar boundary to form a ventrolateral nucleus in a position comparable to that occupied by rhombic lip derived neurons in rhombomere 2. Conclusions Different overexpression strategies reveal that the recognition of migration cues by granule cell precursors is dependent on their identity as rhombomere 1 derivatives. Segmental patterning cues operate autonomously within the rhombic lip

  6. Total heat loss coefficient of flat roof constructions with external insulation in tapered layers including the effects of thermal bridges

    DEFF Research Database (Denmark)

    Rose, Jørgen; Svendsen, Svend

    2005-01-01

    and insulation has to be fulfilled. Based on a given design of the tapered insulation the total heat loss coefficient of the roof can be calculated using formulae in EN ISO 6946 for typical segments of the tapered insulation. Performing design and calculations for large roofs with numerous different segments can...... for design of flat roofs and a pc-program that can be used for calculating the total heat loss coefficient of externally insulated roofs with insulation in tapered layers, taking into account thermal bridges in the roof construction.......In order to achieve durability of flat roofs with external insulation, it is necessary to secure proper drainage of the roof, i.e. to avoid water leaking into the insulation. The design of the tapered insulation of the roof is quite difficult as requirements with respect to both drainage...

  7. Total heat loss coefficient of flat roof constructions with external insulation in tapered layers including the effects of thermal bridges

    DEFF Research Database (Denmark)

    Rose, Jørgen; Svendsen, Svend

    2005-01-01

    be quite tedious, and therefore a method to generate and optimize solutions has been developed and implemented in a program that also takes into account the effects of different types of thermal bridges, i.e. roof windows, insulation fasteners, roof/wall joints etc. This paper describes a new method...... for design of flat roofs and a pc-program that can be used for calculating the total heat loss coefficient of externally insulated roofs with insulation in tapered layers, taking into account thermal bridges in the roof construction....

  8. Quasi-two-layer finite-volume scheme for modeling shallow water flows with the presence of external forces

    CERN Document Server

    Karelsky, K V; Slavin, A G

    2011-01-01

    The numerical method for study of hydrodynamic flows over an arbitrary bed profile in the presence of external force is proposed in this paper. This method takes into account the external force effect, it uses the quasi-two-layer model of hydrodynamic flows over a stepwise boundary with consideration of features of the flow near the step. A distinctive feature of the proposed method is the consideration of the properties of the process of the waterfall, namely the fluid flow on the step in which the fluid does not wet part of the vertical wall of the step. The presence of dry zones in the vertical part of the step indicates violation of the conditions of hydrostatic flow. The quasi-two-layer approach allows to determine the size of the dry zone of the vertical component of the step. Consequently it gives an opportunity to figure out the amount of kinetic energy dissipation. There are performed the numerical simulations based on the proposed algorithm of various physical phenomena, such as a breakdown of the r...

  9. Perturbation of hydration layer in solvated proteins by external electric and electromagnetic fields: Insights from non-equilibrium molecular dynamics

    Science.gov (United States)

    Nandi, Prithwish K.; Futera, Zdenek; English, Niall J.

    2016-11-01

    Given the fundamental role of water in governing the biochemistry of enzymes, and in regulating their wider biological activity (e.g., by local water concentration surrounding biomolecules), the influence of extraneous electric and electromagnetic (e/m) fields thereon is of central relevance to biophysics and, more widely, biology. With the increase in levels of local and atmospheric microwave-frequency radiation present in modern life, as well as other electric-field exposure, the impact upon hydration-water layers surrounding proteins, and biomolecules generally, becomes a particularly pertinent issue. Here, we present a (non-equilibrium) molecular-dynamics-simulation study on a model protein (hen egg-white lysozyme) hydrated in water, in which we determine, inter alia, translational self-diffusivities for both hen egg-white lysozyme and its hydration layer together with relaxation dynamics of the hydrogen-bond network between the protein and its hydration-layer water molecules on a residue-per-residue basis. Crucially, we perform this analysis both above and below the dynamical-transition temperature (at ˜220 K), at 300 and 200 K, respectively, and we compare the effects of external static-electric and e/m fields with linear-response-régime (r.m.s.) intensities of 0.02 V/Å. It was found that the translational self-diffusivity of hen egg-white lysozyme and its hydration-water layer are increased substantially in static fields, primarily due to the induced electrophoretic motion, whilst the water-protein hydrogen-bond-network-rearrangement kinetics can also undergo rather striking accelerations, primarily due to the enhancement of a larger-amplitude local translational and rotational motion by charged and dipolar residues, which serves to promote hydrogen-bond breakage and re-formation kinetics. These external-field effects are particularly evident at 200 K, where they serve to induce the protein- and solvation-layer-response effects redolent of dynamical

  10. Granulation of fine powder

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ching-Fong

    2016-08-09

    A mixture of fine powder including thorium oxide was converted to granulated powder by forming a first-green-body and heat treating the first-green-body at a high temperature to strengthen the first-green-body followed by granulation by crushing or milling the heat-treated first-green-body. The granulated powder was achieved by screening through a combination of sieves to achieve the desired granule size distribution. The granulated powder relies on the thermal bonding to maintain its shape and structure. The granulated powder contains no organic binder and can be stored in a radioactive or other extreme environment. The granulated powder was pressed and sintered to form a dense compact with a higher density and more uniform pore size distribution.

  11. Mixed convection boundary layer flow over a moving vertical flat plate in an external fluid flow with viscous dissipation effect.

    Directory of Open Access Journals (Sweden)

    Norfifah Bachok

    Full Text Available The steady boundary layer flow of a viscous and incompressible fluid over a moving vertical flat plate in an external moving fluid with viscous dissipation is theoretically investigated. Using appropriate similarity variables, the governing system of partial differential equations is transformed into a system of ordinary (similarity differential equations, which is then solved numerically using a Maple software. Results for the skin friction or shear stress coefficient, local Nusselt number, velocity and temperature profiles are presented for different values of the governing parameters. It is found that the set of the similarity equations has unique solutions, dual solutions or no solutions, depending on the values of the mixed convection parameter, the velocity ratio parameter and the Eckert number. The Eckert number significantly affects the surface shear stress as well as the heat transfer rate at the surface.

  12. Novel subdomains of the mouse olfactory bulb defined by molecular heterogeneity in the nascent external plexiform and glomerular layers

    Directory of Open Access Journals (Sweden)

    Yona Golan

    2007-05-01

    Full Text Available Abstract Background In the mouse olfactory system, the role of the olfactory bulb in guiding olfactory sensory neuron (OSN axons to their targets is poorly understood. What cell types within the bulb are necessary for targeting is unknown. What genes are important for this process is also unknown. Although projection neurons are not required, other cell-types within the external plexiform and glomerular layers also form synapses with OSNs. We hypothesized that these cells are important for targeting, and express spatially differentially expressed guidance cues that act to guide OSN axons within the bulb. Results We used laser microdissection and microarray analysis to find genes that are differentially expressed along the dorsal-ventral, medial-lateral, and anterior-posterior axes of the bulb. The expression patterns of these genes divide the bulb into previously unrecognized subdomains. Interestingly, some genes are expressed in both the medial and lateral bulb, showing for the first time the existence of symmetric expression along this axis. We use a regeneration paradigm to show that several of these genes are altered in expression in response to deafferentation, consistent with the interpretation that they are expressed in cells that interact with OSNs. Conclusion We demonstrate that the nascent external plexiform and glomerular layers of the bulb can be divided into multiple domains based on the expression of these genes, several of which are known to function in axon guidance, synaptogenesis, and angiogenesis. These genes represent candidate guidance cues that may act to guide OSN axons within the bulb during targeting.

  13. Effect of multilayer structure, stacking order and external electric field on the electrical properties of few-layer boron-phosphide.

    Science.gov (United States)

    Chen, Xianping; Tan, Chunjian; Yang, Qun; Meng, Ruishen; Liang, Qiuhua; Jiang, Junke; Sun, Xiang; Yang, D Q; Ren, Tianling

    2016-06-28

    Development of nanoelectronics requires two-dimensional (2D) systems with both direct-bandgap and tunable electronic properties as they act in response to the external electric field (E-field). Here, we present a detailed theoretical investigation to predict the effect of atomic structure, stacking order and external electric field on the electrical properties of few-layer boron-phosphide (BP). We demonstrate that the splitting of bands and bandgap of BP depends on the number of layers and the stacking order. The values for the bandgap show a monotonically decreasing relationship with increasing layer number. We also show that AB-stacking BP has a direct-bandgap, while ABA-stacking BP has an indirect-bandgap when the number of layers n > 2. In addition, for a bilayer and a trilayer, the bandgap increases (decreases) as the electric field increases along the positive direction of the external electric field (E-field) (negative direction). In the case of four-layer BP, the bandgap exhibits a nonlinearly decreasing behavior as the increase in the electric field is independent of the electric field direction. The tunable mechanism of the bandgap can be attributed to a giant Stark effect. Interestingly, the investigation also shows that a semiconductor-to-metal transition may occur for the four-layer case or more layers beyond the critical electric field. Our findings may inspire more efforts in fabricating new nanoelectronics devices based on few-layer BP.

  14. DEVELOPMENT OF A FABRICATION PROCESS FOR SOL-GEL/METAL HYDRIDE COMPOSITE GRANULES

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, E; Eric Frickey, E; Leung Heung, L

    2004-02-23

    An external gelation process was developed to produce spherical granules that contain metal hydride particles in a sol-gel matrix. Dimensionally stable granules containing metal hydrides are needed for applications such as hydrogen separation and hydrogen purification that require columns containing metal hydrides. Gases must readily flow through the metal hydride beds in the columns. Metal hydrides reversibly absorb and desorb hydrogen and hydrogen isotopes. This is accompanied by significant volume changes that cause the metal hydride to break apart or decrepitate. Repeated cycling results in very fine metal hydride particles that are difficult to handle and contain. Fine particles tend to settle and pack making it more difficult to flow gases through a metal hydride bed. Furthermore, the metal hydrides can exert a significant force on the containment vessel as they expand. These problems associated with metal hydrides can be eliminated with the granulation process described in this report. Small agglomerates of metal hydride particles and abietic acid (a pore former) were produced and dispersed in a colloidal silica/water suspension to form the feed slurry. Fumed silica was added to increase the viscosity of the feed slurry which helped to keep the agglomerates in suspension. Drops of the feed slurry were injected into a 27-foot tall column of hot ({approx}70 C), medium viscosity ({approx}3000 centistokes) silicone oil. Water was slowly evaporated from the drops as they settled. The drops gelled and eventually solidified to form spherical granules. This process is referred to as external gelation. Testing was completed to optimize the design of the column, the feed system, the feed slurry composition, and the operating parameters of the column. The critical process parameters can be controlled resulting in a reproducible fabrication technique. The residual silicone oil on the surface of the granules was removed by washing in mineral spirits. The granules were

  15. Heterogeneous structure and spatial distribution in endosperm of high-amylose rice starch granules with different morphologies.

    Science.gov (United States)

    Cai, Canhui; Huang, Jun; Zhao, Lingxiao; Liu, Qiaoquan; Zhang, Changquan; Wei, Cunxu

    2014-10-15

    Starch granules from high-amylose cereal mutants or transgenic lines usually have different morphologies. It is not clear whether the structure and spatial distribution of starch granules with different morphologies in endosperm is homogeneous or heterogeneous. In the present study, the structure and spatial distribution in endosperm of morphologically different starch granules from high-amylose transgenic rice line (TRS) were investigated. The TRS endosperm had individual, aggregate, elongated, and interior hollow starch granules. The individual and interior hollow granules had the lowest and the highest amylose content and gelatinization resistance, respectively, among the four types of granules. The individual granules were mainly distributed in the middle of the endosperm; the aggregate granules in the starchy endosperm cells between the subaleurone layer and the middle of the endosperm; the elongated granules in the peripheral starchy endosperm cells adjacent to the subaleurone layer; and the interior hollow granules in the subaleurone layer cells.

  16. Simulation studies on the effect of a buffer layer on the external parameters of hydrogenated amorphous silicon –– solar cells

    Indian Academy of Sciences (India)

    K Rajeev Kumar; M Zeman

    2008-10-01

    Device modeling of –– junction amorphous silicon solar cells has been carried out using the amorphous semiconductor analysis (ASA) simulation programme. The aim of the study was to explain the role of a buffer layer in between the - and -layers of the –– solar cell on the external parameters such as dark current density and open circuit voltage. Investigations based on the simulation of dark – characteristics revealed that as the buffer layer thickness increases the dark current for a given voltage decreases.

  17. Mining the granule proteome

    DEFF Research Database (Denmark)

    Albrethsen, Jakob; Goetze, Jens P; Johnsen, Anders H

    2015-01-01

    Proteomics of secretory granules is an emerging strategy for identifying secreted proteins, including potentially novel candidate biomarkers and peptide hormones. In addition, proteomics can provide information about the abundance, localization and structure (post-translational modification) of g...

  18. The relation between granule size, granule stickiness, and torque in the high-shear granulation process

    NARCIS (Netherlands)

    Bouwman, A.M.; Henstra, M.J.; Hegge, J.J.M.E.; Zhang, Z.; Ingram, A.; Seville, J.P.K.; Frijlink, H.W.

    2005-01-01

    Purpose. To investigate the background of the observed relationship between measured torque and granule size in high-shear granulation processes. Methods. Torque was measured during the granulation process; the behavior of individual wet granules during compaction was investigated using micromanipul

  19. Phosphorescent OLEDs: Sky-Blue Phosphorescent OLEDs with 34.1% External Quantum Efficiency Using a Low Refractive Index Electron Transporting Layer (Adv. Mater. 24/2016).

    Science.gov (United States)

    Shin, Hyun; Lee, Jeong-Hwan; Moon, Chang-Ki; Huh, Jin-Suk; Sim, Bomi; Kim, Jang-Joo

    2016-06-01

    J.-J. Kim and co-workers achieve highly efficient blue organic light-emitting diodes (OLEDs) using a low-refractive-index layer. As described on page 4920, an external quantum efficiency over 34% is achieved, owing to the low refractive index of the materials. A milepost and a shining entrance of the castle are the metaphor indicating the way to highly efficient blue OLEDs. On the way to the castle, the depicted chemical structures serve as the light-emitting layer. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Hydrogenic impurity, external electric and magnetic fields effects on the nonlinear optical properties of a multi-layer spherical quantum dot

    Science.gov (United States)

    Tanhaei, M. H.; Rezaei, G.

    2016-10-01

    In this work, effects of an on-center hydrogenic impurity, external electric and magnetic fields on the optical rectification coefficient (ORC), second and third harmonic generations (SHG and THG) of a multi-layer spherical quantum dot (MLSQD) are studied. Energy eigenvalues and eigenvectors are calculated using the direct matrix diagonalization method and optical properties are obtained using the compact density matrix approach. Our results reveal that the hydrogenic impurity and external fields have a great influence on these optical quantities. Hydrogenic impurity reduces the magnitude of the resonant peaks and shifts them to the higher energies. An increase in the magnetic (electric) field, leads to increase (decrease) the interval energies and the dipole moment matrix elements. Therefore, resonant peaks of these optical quantities find an obvious blue (red) shift and their magnitudes enhance (diminish) with increasing the external magnetic (electric) field.

  1. Antimicrobial-Coated Granules for Disinfecting Water

    Science.gov (United States)

    Akse, James R.; Holtsnider, John T.; Kliestik, Helen

    2011-01-01

    Methods of preparing antimicrobialcoated granules for disinfecting flowing potable water have been developed. Like the methods reported in the immediately preceding article, these methods involve chemical preparation of substrate surfaces (in this case, the surfaces of granules) to enable attachment of antimicrobial molecules to the surfaces via covalent bonds. A variety of granular materials have been coated with a variety of antimicrobial agents that include antibiotics, bacteriocins, enzymes, bactericides, and fungicides. When employed in packed beds in flowing water, these antimicrobial-coated granules have been proven effective against gram-positive bacteria, gram-negative bacteria, fungi, and viruses. Composite beds, consisting of multiple layers containing different granular antimicrobial media, have proven particularly effective against a broad spectrum of microorganisms. These media have also proven effective in enhancing or potentiating the biocidal effects of in-line iodinated resins and of very low levels of dissolved elemental iodine.

  2. Correlative microscopy of detergent granules.

    Science.gov (United States)

    van Dalen, G; Nootenboom, P; Heussen, P C M

    2011-03-01

    The microstructure of detergent products for textile cleaning determines to a large extent the physical properties of these products. Correlative microscopy was used to reveal the microstructure by reconciling images obtained by scanning electron microscopy with energy dispersive X-ray analysis, X-ray microtomography and Fourier transform infrared microscopy. These techniques were applied on the same location of a subsample of a spray-dried detergent base powder embedded in polyacrylate. In this way, the three-dimensional internal and external structure of detergent granules could be investigated from milli to nano scale with detailed spatial information about the components present. This will generate knowledge how to design optimal microstructures for laundry products to obtain product properties demanded by the market. This method is also very useful for other powder systems used in a large variety of industries (e.g. for pharmaceutical, food, ceramic and metal industries).

  3. Investigation of internal structure of fine granules by microtomography using synchrotron X-ray radiation.

    Science.gov (United States)

    Noguchi, Shuji; Kajihara, Ryusuke; Iwao, Yasunori; Fujinami, Yukari; Suzuki, Yoshio; Terada, Yasuko; Uesugi, Kentaro; Miura, Keiko; Itai, Shigeru

    2013-03-10

    Computed tomography (CT) using synchrotron X-ray radiation was evaluated as a non-destructive structural analysis method for fine granules. Two kinds of granules have been investigated: a bromhexine hydrochloride (BHX)-layered Celphere CP-102 granule coated with pH-sensitive polymer Kollicoat Smartseal 30-D, and a wax-matrix granule constructed from acetaminophen (APAP), dibasic calcium phosphate dehydrate, and aminoalkyl methacrylate copolymer E (AMCE) manufactured by melt granulation. The diameters of both granules were 200-300 μm. CT analysis of CP-102 granule could visualize the laminar structures of BHX and Kollicoat layers, and also visualize the high talc-content regions in the Kollicoat layer that could not be detected by scanning electron microscopy. Moreover, CT analysis using X-ray energies above the absorption edge of Br specifically enhanced the contrast in the BHX layer. As for granules manufactured by melt granulation, CT analysis revealed that they had a small inner void space due to a uniform distribution of APAP and other excipients. The distribution of AMCE revealed by CT analysis was also found to involve in the differences of drug dissolution from the granules as described previously. These observations demonstrate that CT analysis using synchrotron X-ray radiation is a powerful method for the detailed internal structure analysis of fine granules. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. Effects of stacking order, layer number and external electric field on electronic structures of few-layer C2N-h2D.

    Science.gov (United States)

    Zhang, Ruiqi; Li, Bin; Yang, Jinlong

    2015-09-07

    Recently, a new type of two-dimensional layered material, i.e. a nitrogenated holey two-dimensional structure C2N-h2D, has been synthesized using a simple wet-chemical reaction and used to fabricate a field-effect transistor device (Nat. Commun., 2015, 6, 6486). Here we have performed a first-principles study of the electronic properties of few-layer C2N-h2D with different stacking orders and layer numbers. Because of the interlayer coupling mainly in terms of the orbital interaction, band structure of this system, especially splitting of the bands and band gap, depends on its stacking order between the layers, and the band gap exhibits monotonically decreasing behavior as the layer number increases. All the few-layer C2N-h2D materials have characteristics of direct band gap, irrespective of the stacking order and layer number examined in our calculations. And bulk C2N-h2D has an indirect or direct band gap, depending on the stacking order. Besides, when we apply an out-of-plane electric field on few-layer C2N-h2D, its band gap will decrease as the electric field increases due to a giant Stark effect except for the monolayer case, and even a semiconductor-to-metal transition may occur for few-layer C2N-h2D with more layers under an appropriate electric field. Owing to their tunable band gaps in a wide range, the layered C2N-h2D materials will have tremendous opportunities to be applied in nanoscale electronic and optoelectronic devices.

  5. Thickness optimization of the ZnO based TCO layer in a CZTSSe solar cell. Evolution of its performance with thickness when external temperature changes.

    Science.gov (United States)

    Chadel, Meriem; Moustafa Bouzaki, Mohammed; Chadel, Asma; Aillerie, Michel; Benyoucef, Boumediene

    2017-07-01

    The influence of the thickness of a Zinc Oxide (ZnO) transparent conductive oxide (TCO) layer on the performance of the CZTSSe solar cell is shown in detail. In a photovoltaic cell, the thickness of each layer largely influence the performance of the solar cell and optimization of each layer constitutes a complete work. Here, using the Solar Cell Capacitance Simulation (SCAPS) software, we present simulation results obtained in the analyze of the influence of the TCO layer thickness on the performance of a CZTSSe solar cell, starting from performance of a CZTSSe solar cell commercialized in 2014 with an initial efficiency equal to 12.6%. In simulation, the temperature was considered as a functioning parameter and the evolution of tthe performance of the cell for various thickness of the TCO layer when the external temperature changes is simulated and discussed. The best efficiency of the solar cell based in CZTSSe is obtained with a ZnO thickness equal to 50 nm and low temperature. Based on the considered marketed cell, we show a technological possible increase of the global efficiency achieving 13% by optimization of ZnO based TCO layer.

  6. The stability of two layer dielectric-electrolyte micro-flow subjected to an external electric field

    Science.gov (United States)

    Demekhin, E. A.; Ganchenko, G. S.; Navarkar, A.; Amiroudine, S.

    2016-09-01

    The two-phase microflow of conductive (electrolyte) and non-conductive (dielectric) viscous liquids bounded by two solid walls in an external electric field is scrutinized. The lower solid wall, which is adjoined to the electrolyte, is a charged dielectric surface; the upper wall which bounds the dielectric is insulated. The problem has a steady one-dimensional (1D) solution. The theoretical results for a plug-like velocity profile are successfully compared with available theoretical and experimental data from the literature. The linear stability of the steady-state flow is investigated numerically with spectral Galerkin's method for solving linearized eigenvalue problem. This method was successfully applied for related problem of electroosmosis of ultrathin film. The numerical analysis provides insights on the coexistence of long and short-wave instabilities. The influence of control parameters such as the ratio of the viscosities of both liquids and the ratio of the channel heights on the stability of one-dimensional flow was investigated for different values of external electric field. The influence of an external pressure gradient on the flow stability is also investigated. The experimental facts established by other authors, according to which the system destabilizes if the electroosmotic flow is oppositely directed to the external pressure gradient, is confirmed in this work. Otherwise stabilization takes place.

  7. Proneurotrophin-3 promotes cell cycle withdrawal of developing cerebellar granule cell progenitors via the p75 neurotrophin receptor.

    Science.gov (United States)

    Zanin, Juan Pablo; Abercrombie, Elizabeth; Friedman, Wilma J

    2016-07-19

    Cerebellar granule cell progenitors (GCP) proliferate extensively in the external granule layer (EGL) of the developing cerebellum prior to differentiating and migrating. Mechanisms that regulate the appropriate timing of cell cycle withdrawal of these neuronal progenitors during brain development are not well defined. The p75 neurotrophin receptor (p75(NTR)) is highly expressed in the proliferating GCPs, but is downregulated once the cells leave the cell cycle. This receptor has primarily been characterized as a death receptor for its ability to induce neuronal apoptosis following injury. Here we demonstrate a novel function for p75(NTR) in regulating proper cell cycle exit of neuronal progenitors in the developing rat and mouse EGL, which is stimulated by proNT3. In the absence of p75(NTR), GCPs continue to proliferate beyond their normal period, resulting in a larger cerebellum that persists into adulthood, with consequent motor deficits.

  8. Control of boundary layer transition location and plate vibration in the presence of an external acoustic field

    Science.gov (United States)

    Maestrello, L.; Grosveld, F. W.

    1991-01-01

    The experiment is aimed at controlling the boundary layer transition location and the plate vibration when excited by a flow and an upstream sound source. Sound has been found to affect the flow at the leading edge and the response of a flexible plate in a boundary layer. Because the sound induces early transition, the panel vibration is acoustically coupled to the turbulent boundary layer by the upstream radiation. Localized surface heating at the leading edge delays the transition location downstream of the flexible plate. The response of the plate excited by a turbulent boundary layer (without sound) shows that the plate is forced to vibrate at different frequencies and with different amplitudes as the flow velocity changes indicating that the plate is driven by the convective waves of the boundary layer. The acoustic disturbances induced by the upstream sound dominate the response of the plate when the boundary layer is either turbulent or laminar. Active vibration control was used to reduce the sound induced displacement amplitude of the plate.

  9. Treatment of gouty arthritis in different phases by a series of Tongfeng granule: an efficacy observation

    Institute of Scientific and Technical Information of China (English)

    周蜜

    2014-01-01

    Objective To evaluate the clinical efficacy of a series of Tongfeng Granule(TG)in treating gouty arthritis patients in different stages.Methods Ninety primary gout patients were randomly assigned to two groups,the TCM treatment group(60 cases)and the Western medicine control group(30 cases).Huzhang Tongfeng Granule in combination with external application of Jinhuang Ointment was given to those in the TCM treatment group in the acute phase,and Yinlian Tongfeng Granule in the

  10. The multi-layered ring under parabolic distribution of radial stresses combined with uniform internal and external pressure

    Directory of Open Access Journals (Sweden)

    Christos F. Markides

    2017-04-01

    Full Text Available A recently introduced solution for the stress- and displacement-fields, developed in a multi-layered circular ring, composed of a finite number of linearly elastic concentric layers, subjected to a parabolic distribution of ra-dial stresses, is here extended to encompass a more general loading scheme, closer to actual conditions. The loading scheme includes, besides the para¬-bolic radial stresses, a combination of uniform pressures acting along the outer- and inner- most boundaries of the layered ring. The analytic solution of the problem is achieved by adopting Savin’s pioneering approach for an infinite plate with a hole strengthened by rings. Taking advantage of the results provided by the ana¬lytic solution, a numerical model, simulating the configuration of a three-layered ring (quite commonly encountered in practic¬al applications is validated. The numerical model is then used for a parametric analysis enlightening some crucial aspects of the overall response of the ring.

  11. The permeability of SPION over an artificial three-layer membrane is enhanced by external magnetic field

    Directory of Open Access Journals (Sweden)

    Ge Xianxi

    2006-04-01

    Full Text Available Abstract Background Sensorineural hearing loss, a subset of all clinical hearing loss, may be correctable through the use of gene therapy. We are testing a delivery system of therapeutics through a 3 cell-layer round window membrane model (RWM model that may provide an entry of drugs or genes to the inner ear. We designed an in vitro RWM model similar to the RWM (will be referred to throughout the paper as RWM model to determine the feasibility of using superparamagnetic iron oxide (Fe3O4 nanoparticles (SPION for targeted delivery of therapeutics to the inner ear. The RWM model is a 3 cell-layer model with epithelial cells cultured on both sides of a small intestinal submucosal (SIS matrix and fibroblasts seeded in between. Dextran encapsulated nanoparticle clusters 130 nm in diameter were pulled through the RWM model using permanent magnets with flux density 0.410 Tesla at the pole face. The SIS membranes were harvested at day 7 and then fixed in 4% paraformaldehyde. Transmission electron microscopy and fluorescence spectrophotometry were used to verify transepithelial transport of the SPION across the cell-culture model. Histological sections were examined for evidence of SPION toxicity, as well to generate a timeline of the position of the SPION at different times. SPION also were added to cells in culture to assess in vitro toxicity. Results Transepithelial electrical resistance measurements confirmed epithelial confluence, as SPION crossed a membrane consisting of three co-cultured layers of cells, under the influence of a magnetic field. Micrographs showed SPION distributed throughout the membrane model, in between cell layers, and sometimes on the surface of cells. TEM verified that the SPION were pulled through the membrane into the culture well below. Fluorescence spectrophotometry quantified the number of SPION that went through the SIS membrane. SPION showed no toxicity to cells in culture. Conclusion A three-cell layer model of the

  12. The Python user interface of the elsA cfd software: a coupling framework for external steering layers

    CERN Document Server

    Marc, Lazareff

    2016-01-01

    The Python--elsA user interface of the elsA CFD (Computational Fluid Dynamics) software has been developed to allow users to specify simulations with confidence, through a global context of description objects grouped inside scripts. The software main features are generated documentation, context checking and completion, and helpful error management. Further developments have used this foundation as a coupling framework, allowing (thanks to the descriptive approach) the coupling of external algorithms with the CFD solver in a rather simple and abstract way, leading to more success in complex simulations. Along with the description of the technical part of the interface, we try to gather the salient points pertaining to the psychological viewpoint of user experience (UX).

  13. Application of high OLR-fed aerobic granules for the treatment of low-strength wastewater: Performance, granule morphology and microbial community

    Institute of Scientific and Technical Information of China (English)

    Jingyun Ma; Xiangchun Quan; Huai Li

    2013-01-01

    Aerobic granules,pre-cultivated at the organic loading rate (OLR) of 3.0 kg COD/(m3·day),were used to treat low-strength wastewater in two sequencing batch reactors at low OLRs of 1.2 and 0.6 kg COD/(m3·day),respectively.Reactor performance,evolution of granule morphology,structure and microbial community at low OLRs under long-term operation (130 days) were investigated.Results showed that low OLRs did not cause significant damage to granule structure as a dominant granule morphology with size over 540 μm was maintained throughout the operation.Aerobic granules at sizes of about 750 μm were finally obtained at the low OLRs.The granule reactors operated at low OLRs demonstrated effective COD and ammonia removals (above 90%),smaller granule sizes and less biomass.The contents of extracellular polymeric substances in the granules were decreased while the ratios of exopolysaccharide/exoprotein were increased (above 1.0).The granules cultivated at the low OLRs showed a smoother surface and more compact structure than the seeded granules.A significant shift in microbial community was observed but the microbial diversity remained relatively stable.Confocal Laser Scanning Microscopy observation showed that the live cells were spread throughout the whole granule,while the dead cells were mainly concentrated in the outer layer of the granule,and the proteins,polysaccharides and lipids were mainly located in the central regime of the granule.In conclusion,granules cultivated at high OLRs show potential for treating low-strength organic wastewater steadily under long-term operation.

  14. Granulation of increasingly hydrophobic formulations using a twin screw granulator.

    Science.gov (United States)

    Yu, Shen; Reynolds, Gavin K; Huang, Zhenyu; de Matas, Marcel; Salman, Agba D

    2014-11-20

    The application of twin screw granulation in the pharmaceutical industry has generated increasing interest due to its suitability for continuous processing. However, an understanding of the impact of formulation properties such as hydrophobicity on intermediate and finished product quality has not yet been established. Hence, the current work investigated the granulation behaviour of three formulations containing increasing amounts of hydrophobic components using a Consigma™-1 twin screw granulator. Process conditions including powder feed rate, liquid to solid ratio, granulation liquid composition and screw configuration were also evaluated. The size of the wet granules was measured in order to enable exploration of granulation behaviour in isolation without confounding effects from downstream processes such as drying. The experimental observations indicated that the granulation process was not sensitive to the powder feed rate. The hydrophobicity led to heterogeneous liquid distribution and hence a relatively large proportion of un-wetted particles. Increasing numbers of kneading elements led to high shear and prolonged residence time, which acted to enhance the distribution of liquid and feeding materials. The bimodal size distributions considered to be characteristic of twin screw granulation were primarily ascribed to the breakage of relatively large granules by the kneading elements.

  15. Buckling delamination of the circular sandwich plate with piezoelectric face and elastic core layers under rotationally symmetric external pressure

    Science.gov (United States)

    Akbarov, Surkay D.; Cafarova, Fazile I.; Yahnioglu, Nazmiye

    2017-02-01

    The axisymmetric buckling delamination of the piezoelectric circular sandwich plate with piezoelectric face and elastic (metal) core layers around the interface penny-shaped cracks is investigated. The case is considered where short-circuit conditions with respect to the electrical potential on the upper and lower and also lateral surfaces of face layers are satisfied. It is assumed that the edge surfaces of the cracks have an infinitesimal rotationally symmetric initial imperfection and the development of this imperfection with rotationally symmetric compressive forces acting on the lateral surface of the plate is studied by employing the exact geometrically non-linear field equations and relations of electro-elasticity for piezoelectric materials. Solution to the considered nonlinear problem is reduced to solution of the series boundary value problems derived by applying the linearization procedure with respect to small imperfection of the sought values. Numerical results reveal the effect of piezoelectricity as well as geometrical and material parameters on the critical values are determined numerically by employing finite element method (FEM).

  16. Application of the model of the printed circuit board with regard to the topology of external conductive layers for calculation of the thermal conditions of the printed circuit board

    Science.gov (United States)

    Rybakov, I. M.; Goryachev, N. V.; Kochegarov, I. I.; Grishko, A. K.; Brostilov, S. A.; Yurkov, N. K.

    2017-01-01

    The paper proves the necessity of taking into account external conductive layers of the printed circuit board with the thermal physical designing radio-electronic means. For example, a single printed circuit board shows the level of influence of the external conductive layer on the thermal conditions of the printed circuit board. It proved the influence of Joule heat in the thermal conditions of a single conductor. Developed geometrical and thermal printed circuit board models take into account the topological layer and can improve the accuracy of determining the thermal conditions of the printed circuit board.

  17. The morphological details of globular keratohyalin granules.

    Science.gov (United States)

    Westerhof, W; Dingemans, K P

    1986-10-01

    In quickly dividing epithelia such as that of the tongue, keratohyalin formation takes place in globular keratohyalin granules (KHG). This is in contrast with the irregular KHG as seen in normal, slowly dividing epidermis. The morphogenesis of the globular KHG is explained in this study. In small KHG, dense aggregates of ribosomes can be seen at the site of blebs. It is suggested that these blebs framed with ribosomes are internalized giving rise to "dense homogeneous deposits" or "single granules". Lipid droplets occur in the upper spinous and horny layer. Globular KHG also contain variable amounts of lipids, and the lipid content seems to be inversely related to the protein content, dependent on the degree of cell differentiation or on the rate of cell turnover. It is suggested that in epithelia with a high cell turnover few rigid keratohyalin components are dispersed in lipids, which maintain a globular shape due to the surface tension.

  18. Isolation of RNP granules

    DEFF Research Database (Denmark)

    Jønson, Lars; Nielsen, Finn Cilius; Christiansen, Jan

    2011-01-01

    be regarded as a supramolecular assembly of RNA and protein, probably representing several overlapping post-transcriptional operons. The present protocol describes how RNP granules may be isolated by the transgenic expression of a 3X FLAG version of an RNA-binding protein under tetracycline control via...... the tetracycline receptor/operator complex. In this way, inclusion of an appropriate tetracycline concentration ensures expression of the tagged version at the endogenous level, and the 3X FLAG tag is a convenient "handle" for the subsequent immunoprecipitation by immobilized anti-FLAG antibody....

  19. Cellular and Axonal Diversity in Molecular Layer Heterotopia of the Rat Cerebellar Vermis

    Directory of Open Access Journals (Sweden)

    Sarah E. Van Dine

    2013-01-01

    Full Text Available Molecular layer heterotopia of the cerebellar primary fissure are a characteristic of many rat strains and are hypothesized to result from defect of granule cells exiting the external granule cell layer during cerebellar development. However, the cellular and axonal constituents of these malformations remain poorly understood. In the present report, we use histochemistry and immunocytochemistry to identify neuronal, glial, and axonal classes in molecular layer heterotopia. In particular, we identify parvalbumin-expressing molecular layer interneurons in heterotopia as well as three glial cell types including Bergmann glia, Olig2-expressing oligodendrocytes, and Iba1-expressing microglia. In addition, we document the presence of myelinated, serotonergic, catecholaminergic, and cholinergic axons in heterotopia indicating possible spinal and brainstem afferent projections to heterotopic cells. These findings are relevant toward understanding the mechanisms of normal and abnormal cerebellar development.

  20. Granulation techniques and technologies: recent progresses.

    Science.gov (United States)

    Shanmugam, Srinivasan

    2015-01-01

    Granulation, the process of particle enlargement by agglomeration technique, is one of the most significant unit operations in the production of pharmaceutical dosage forms, mostly tablets and capsules. Granulation process transforms fine powders into free-flowing, dust-free granules that are easy to compress. Nevertheless, granulation poses numerous challenges due to high quality requirement of the formed granules in terms of content uniformity and physicochemical properties such as granule size, bulk density, porosity, hardness, moisture, compressibility, etc. together with physical and chemical stability of the drug. Granulation process can be divided into two types: wet granulation that utilize a liquid in the process and dry granulation that requires no liquid. The type of process selection requires thorough knowledge of physicochemical properties of the drug, excipients, required flow and release properties, to name a few. Among currently available technologies, spray drying, roller compaction, high shear mixing, and fluid bed granulation are worth of note. Like any other scientific field, pharmaceutical granulation technology also continues to change, and arrival of novel and innovative technologies are inevitable. This review focuses on the recent progress in the granulation techniques and technologies such as pneumatic dry granulation, reverse wet granulation, steam granulation, moisture-activated dry granulation, thermal adhesion granulation, freeze granulation, and foamed binder or foam granulation. This review gives an overview of these with a short description about each development along with its significance and limitations.

  1. Granule Size Distribution and Porosity of Granule Packing

    Institute of Scientific and Technical Information of China (English)

    DAI Shu-hua; SHEN Feng-man; YU Ai-bing

    2008-01-01

    The granule size distribution and the porosity of the granule packing process were researched.For realizing the optimizing control of the whole sintering production process,researchers must know the factors influencing the granule size distribution and the porosity.Therefore,tests were carried out in the laboratory with regard to the influences of the size and size distribution of raw materials and the total moisture content on the size and size distribution of granule.Moreover,tests for finding out the influences of the moisture content and the granule volume fraction on the porosity were also carried out.The results show that (1) the raw material has little influence on granulation when its size is in the range of 0.51 mm to 1.0 mm;(2) the influence of the material size on granule size plays a dominant role,and in contrast,the moisture content creates a minor effect on granule size;(3) in binary packing system,with the increase in the constituent volume fraction,the porosity initially increases and then decreases,and there is a minimum value on the porosity curve of the binary mixture system;(4) the minimum value of the porosity in binary packing system occurs at different locations for different moisture contents,and this value shifts from right to left on the porosity curve with increasing the moisture content;(5) the addition of small granules to the same size component cannot create a significant influence on the porosity,whereas the addition of large granules to the same system can greatly change the porosity.

  2. Comparison of waxy and normal potato starch remaining granules after chemical surface gelatinization: pasting behavior and surface morphology.

    Science.gov (United States)

    Huang, Junrong; Chen, Zhenghong; Xu, Yalun; Li, Hongliang; Liu, Shuxing; Yang, Daqing; Schols, Henk A

    2014-02-15

    To understand the contribution of granule inner portion to the pasting property of starch, waxy potato starch and two normal potato starches and their acetylated starch samples were subjected to chemical surface gelatinization by 3.8 mol/L CaCl2 to obtain remaining granules. Native and acetylated, original and remaining granules of waxy potato starch had similar rapid visco analyzer (RVA) pasting profiles, while those of two normal potato starches behaved obviously different from each other. All remaining granules had lower peak viscosity than the corresponding original granules. Contribution of waxy potato starch granule's inner portion to the peak viscosity was significant more than those of normal potato starches. The shell structure appearing on the remaining granule surface for waxy potato starch was smoother and thinner than that for normal potato starches as observed by scanning electron microscopy, indicating a more regular structure of shell and a more ordered packing of shell for waxy potato starch granules. The blocklet size of waxy potato starch was smaller and more uniform than those of normal potato starches as shown by atomic force microscopy images of original and remaining granules. In general, our results provided the evidence for the spatial structure diversity between waxy and normal potato starch granules: outer layer and inner portion of waxy potato starch granule had similar structure, while outer layer had notably different structure from inner portion for normal potato starch granule.

  3. Multidimensional modelling of anaerobic granules

    DEFF Research Database (Denmark)

    Picioreanu, C.; Batstone, Damien J.; van Loosdrecht, M.C.M.

    2005-01-01

    . The model uses individual-based representation of biomass particles within the granule (biofilm), and describes spreading by an iterative pushing technique. The overall computational domain consists of one granule, and is divided into a grid with Cartesian coordinates. The number of grid elements does...

  4. Granulated zeolite plant "Alusil", Zvornik

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC's Engineering Department designed basic technological and machine projects for a granulated zeolite production plant, on the basis of which a pilot plant with an initial capacity of 5,000 t/y was constructed in 1984, within Birač - Zvornik production complex. The technology in these projects was developed in the laboratories of the IGPC.Several goals were realized by designing a granulated zeolite production plant. This technology is one of the newest state of the art high tech technologies. The product meets all quality demands, as well as environmental regulations, by which granulated zeolite production for various uses was developed. The granulated zeolite production process is fully automatized, and the product has uniform quality. There is no waste material in granulated zeolite production, because all products with unsatisfactory quality are returned to the process. The production process can be controlled manually, which is necessary during start - up, and repairs.

  5. Proteome profiling of human neutrophil granule subsets, secretory vesicles, and cell membrane

    DEFF Research Database (Denmark)

    Rørvig, Sara; Østergaard, Ole; Heegaard, Niels Henrik Helweg;

    2013-01-01

    granules, SVs, and plasma membrane has been performed before. Here, we performed subcellular fractionation on freshly isolated human neutrophils by nitrogen cavitation and density centrifugation on a four-layer Percoll gradient. Granule subsets were pooled and subjected to SDS-PAGE, and gel pieces were in...

  6. Moluo Yangping Granule (

    Institute of Scientific and Technical Information of China (English)

    LI; En-fu

    2001-01-01

    Peptic ulcer is a common and frequently encountered disease. H2 receptor blocker and several other drugs have been used in treating peptic ulcer (PU) since many years ago, but there still remain a rather large number of intractable ulcer and recurrent ulcer. Recently the discovery of Helicobacter pylori (HP), as well as the relationship between HP and PU relapse was confirmed, but there still lacks of perfect therapeutic program for anti-HP infection(1). From June 1993 to August 1996, we used a pure TCM preparation Moluo Yangping granule (摩罗疡平冲剂, MYG) in treating 64 PU patients, and satisfactory results have been obtained. The report is as follows.

  7. Restricted access molecularly imprinted polymers obtained by bovine serum albumin and/or hydrophilic monomers' external layers: a comparison related to physical and chemical properties.

    Science.gov (United States)

    Santos, Mariane Gonçalves; Moraes, Gabriel de Oliveira Isac; Nakamura, Maurício Gustavo; dos Santos-Neto, Álvaro José; Figueiredo, Eduardo Costa

    2015-11-21

    Molecularly imprinting polymers (MIPs) can be modified with external layers in order to obtain restricted access molecularly imprinted polymers (RAMIPs) able to exclude macromolecules and retain low weight compounds. These modifications have been frequently achieved using hydrophilic monomers, chemically bound on the MIP surface. Recently, our group proposed a new biocompatible RAMIP based on the formation of a bovine serum albumin coating on the surface of MIP particles. This material has been used to extract drugs directly from untreated human plasma samples, but its physicochemical evaluation has not been carried out yet, mainly in comparison with RAMIPs obtained by hydrophilic monomers. Thus, we proposed in this paper a comparative study involving the surface composition, microscopic aspect, selectivity, binding kinetics, adsorption and macromolecule elimination ability of these different materials. We concluded that the synthesis procedure influences the size and shape of particles and that hydrophilic co-monomer addition as well as coating with BSA do not alter the chemical recognition ability of the material. The difference between imprinted and non-imprinted polymers' adsorption was evident (suggesting that imprinted polymers have a better capacity to bind the template than the non-imprinted ones). The Langmuir model presents the best fit to describe the materials' adsorption profile. The polymer covered with hydrophilic monomers presented the best adsorption for the template in an aqueous medium, probably due to a hydrophilic layer on its surface. We also concluded that an association of the hydrophilic monomers with the bovine serum albumin coating is important to obtain materials with higher capacity of macromolecule exclusion.

  8. LXR agonist rescued the deficit in the proliferation of the cerebellar granule cells induced by dexamethasone

    Energy Technology Data Exchange (ETDEWEB)

    Bian, Xuting; Zhong, Hongyu; Li, Fen; Cai, Yulong; Li, Xin; Wang, Lian; Fan, Xiaotang, E-mail: fanxiaotang2005@163.com

    2016-09-02

    Dexamethasone (DEX) exposure during early postnatal life produces permanent neuromotor and intellectual deficits and stunts cerebellar growth. The liver X receptor (LXR) plays important roles in CNS development. However, the effects of LXR on the DEX-mediated impairment of cerebellar development remain undetermined. Thus, mice were pretreated with LXR agonist TO901317 (TO) and were later exposed to DEX to evaluate its protective effects on DEX-mediated deficit during cerebellar development. The results showed that an acute exposure of DEX on postnatal day 7 resulted in a significant impairment in cerebellar development and decreased the proliferation of granule neuron precursors in the external granule layer of cerebellum. This effect was attenuated by pretreatment with TO. We further found that the decrease in the proliferation caused by DEX occurred via up-regulation of glucocorticoid receptor and p27kip1, which could be partially prevented by LXR agonist pretreatment. Overall, our results suggest that LXR agonist pretreatment could protect against DEX-induced deficits in cerebellar development in postnatal mice and may thus be perspective recruited to counteract such GC side effects.

  9. Stimulus-dependent state transition between synchronized oscillation and randomly repetitive burst in a model cerebellar granular layer.

    Directory of Open Access Journals (Sweden)

    Takeru Honda

    2011-07-01

    Full Text Available Information processing of the cerebellar granular layer composed of granule and Golgi cells is regarded as an important first step toward the cerebellar computation. Our previous theoretical studies have shown that granule cells can exhibit random alternation between burst and silent modes, which provides a basis of population representation of the passage-of-time (POT from the onset of external input stimuli. On the other hand, another computational study has reported that granule cells can exhibit synchronized oscillation of activity, as consistent with observed oscillation in local field potential recorded from the granular layer while animals keep still. Here we have a question of whether an identical network model can explain these distinct dynamics. In the present study, we carried out computer simulations based on a spiking network model of the granular layer varying two parameters: the strength of a current injected to granule cells and the concentration of Mg²⁺ which controls the conductance of NMDA channels assumed on the Golgi cell dendrites. The simulations showed that cells in the granular layer can switch activity states between synchronized oscillation and random burst-silent alternation depending on the two parameters. For higher Mg²⁺ concentration and a weaker injected current, granule and Golgi cells elicited spikes synchronously (synchronized oscillation state. In contrast, for lower Mg²⁺ concentration and a stronger injected current, those cells showed the random burst-silent alternation (POT-representing state. It is suggested that NMDA channels on the Golgi cell dendrites play an important role for determining how the granular layer works in response to external input.

  10. Linking granulation performance with residence time and granulation liquid distributions in twin-screw granulation: An experimental investigation.

    Science.gov (United States)

    Kumar, Ashish; Alakarjula, Maija; Vanhoorne, Valérie; Toiviainen, Maunu; De Leersnyder, Fien; Vercruysse, Jurgen; Juuti, Mikko; Ketolainen, Jarkko; Vervaet, Chris; Remon, Jean Paul; Gernaey, Krist V; De Beer, Thomas; Nopens, Ingmar

    2016-07-30

    Twin-screw granulation is a promising wet granulation technique for the continuous manufacturing of pharmaceutical solid dosage forms. A twin screw granulator displays a short residence time. Thus, the solid-liquid mixing must be achieved quickly by appropriate arrangement of transport and kneading elements in the granulator screw allowing the production of granules with a size distribution appropriate for tableting. The distribution of residence time and granulation liquid is governed by the field conditions (such as location and length of mixing zones) in the twin-screw granulator, thus contain interesting information on granulation time, mixing and resulting sub-processes such as wetting, aggregation and breakage. In this study, the impact of process (feed rate, screw speed and liquid-to-solid ratio) and equipment parameters (number of kneading discs and stagger angle) on the residence time (distribution), the granulation liquid-powder mixing and the resulting granule size distributions during twin-screw granulation were investigated. Residence time and axial mixing data was extracted from tracer maps and the solid-liquid mixing was quantified from moisture maps, obtained by monitoring the granules at the granulator outlet using near infra-red chemical imaging (NIR-CI). The granule size distribution was measured using the sieving method. An increasing screw speed dominantly reduced the mean residence time. Interaction of material throughput with the screw speed and with the number of kneading discs led to most variation in the studied responses including residence time and mixing capacity. At a high screw speed, granulation yield improved due to high axial mixing. However, increasing material throughput quickly lowers the yield due to insufficient mixing of liquid and powder. Moreover, increasing liquid-to-solid ratio resulted in more oversized granules, and the fraction of oversized granules further increased at higher throughput. Although an increasing number

  11. 2,3,7,8-Tetracholorodibenzo-p-dioxin exposure disrupts granule neuron precursor maturation in the developing mouse cerebellum.

    Science.gov (United States)

    Collins, Loretta L; Williamson, Mary A; Thompson, Bryan D; Dever, Daniel P; Gasiewicz, Thomas A; Opanashuk, Lisa A

    2008-05-01

    The widespread environmental contaminant 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) has been linked to developmental neurotoxicity associated with abnormal cerebellar maturation in both humans and rodents. TCDD mediates toxicity via binding to the aryl hydrocarbon receptor (AhR), a transcription factor that regulates the expression of xenobiotic metabolizing enzymes and growth regulatory molecules. Our previous studies demonstrated that cerebellar granule neuron precursor cells (GNPs) express transcriptionally active AhR during critical developmental periods. TCDD exposure also impaired GNP proliferation and survival in vitro. Therefore, this study tested the hypothesis that TCDD exposure disrupts cerebellar development by interfering with GNP differentiation. In vivo experiments indicated that TCDD exposure on postnatal day (PND) 6 resulted in increased expression of a mitotic marker and increased thickness of the external granule layer (EGL) on PND10. Expression of the early differentiation marker TAG-1 was also more pronounced in postmitotic, premigratory granule neurons of the EGL, and increased apoptosis of GNPs was observed. On PND21, expression of the late GNP differentiation marker GABA(A alpha 6) receptor (GABAR(A alpha 6)) and total estimated cell numbers were both reduced following exposure on PND6. Studies in unexposed adult AhR(-/-) mice revealed lower GABAR(A alpha 6) levels and DNA content. In vitro studies showed elevated expression of the early differentiation marker p27/Kip1 and the GABAR(A alpha 6) in GNPs following TCDD exposure, and the expression patterns of proteins related to granule cell neurite outgrowth, beta III-tubulin and polysialic acid neural cell adhesion molecule, were consistent with enhanced neuroblast differentiation. Together, our data suggest that TCDD disrupts a normal physiological role of AhR, resulting in compromised GNP maturation and neuroblast survival, which impacts final cell number in the cerebellum.

  12. Granulation techniques and technologies: recent progresses

    OpenAIRE

    Srinivasan Shanmugam

    2015-01-01

    Granulation, the process of particle enlargement by agglomeration technique, is one of the most significant unit operations in the production of pharmaceutical dosage forms, mostly tablets and capsules. Granulation process transforms fine powders into free-flowing, dust-free granules that are easy to compress. Nevertheless, granulation poses numerous challenges due to high quality requirement of the formed granules in terms of content uniformity and physicochemical proper...

  13. Impact and attrition shear breakage of enzyme granules and placebo particles-application to particle design and formulation

    DEFF Research Database (Denmark)

    Jørgensen, Kåre; Bach, Poul; Jensen, Anker

    2005-01-01

    The strength and breakage mechanisms of detergent enzyme granules and typical core materials used for enzyme granules (all of size 500-600 mum) have been investigated under impact and shear stress conditions to simulate the stresses experienced in a detergent factory. In an Impact Tester, single...... breakage mechanism after repeated impacts at 10 m/s is chipping associated with local delamination. Damages to the coating layer may expose the underlying enzyme-containing layer or core and lead to the release of enzyme-active dust. Markedly lower enzyme dust release was obtained by incorporating...... the enzyme into the core of the granule as compared to a layer-structured enzyme distribution. Furthermore, the results indicated that stronger enzyme granule core materials provide a better impact resistance of the final enzyme granule towards the release of enzyme-active dust. Coating layers of inorganic...

  14. Granulopoiesis and granules of human neutrophils

    DEFF Research Database (Denmark)

    Cowland, Jack B; Borregaard, Niels

    2016-01-01

    Granules are essential for the ability of neutrophils to fulfill their role in innate immunity. Granule membranes contain proteins that react to environmental cues directing neutrophils to sites of infection and initiate generation of bactericidal oxygen species. Granules are densely packed...... with proteins that contribute to microbial killing when liberated to the phagosome or extracellularly. Granules are, however, highly heterogeneous and are traditionally subdivided into azurophil granules, specific granules, and gelatinase granules in addition to secretory vesicles. This review will address...... issues pertinent to formation of granules, which is a process intimately connected to maturation of neutrophils from their precursors in the bone marrow. We further discuss possible mechanisms by which decisions are made regarding sorting of proteins to constitutive secretion or storage in granules...

  15. 2 Cases of hereditary palmoplantar keratoderma. An abnormality of keratohyalin granules and keratin fibril formation.

    Science.gov (United States)

    Tezuka, T

    1984-01-01

    2 cases of hereditary palmoplantar keratoderma (Unna-Thost type and keratosis palmoplantaris striata s. linearis type) are reported. In the former, moderate hyperkeratosis and a partial decrease in the stratum granulosum were histologically seen. Keratohyalin granules in the uppermost cell layer of the stratum granulosum were positively stained with the Pauly reagent, though the stratum granulosum consisted of three of four cell layers in the hematoxylin-eosin-stained specimen. Electron microscopically, keratohyalin granules in the lower two or three cell layers of the stratum granulosum were less electron-dense than normal and were granular in appearance, but those in the uppermost cell layer were normal in electron density and in appearance. This case indicates that human keratohyalin granules could consist of a less electron-dense component and an electron-dense amorphous component, and the Pauly-positive substance could be electron-dense and amorphous, and the basophilic material in the hematoxylin-eosin specimen could be less electron-dense and granular under electron microscopy. In the latter, remarkable orthokeratotic hyperkeratosis and hypergranulosis were observed. Electron microscopically, three kinds of keratohyalin-like granules were observed: (1) less electron-dense granules, the electron density of which was equivalent to that of the peripheral region of the nucleus; (2) normally electron-dense amorphous granules attached to the first type of granule, and (3) extremely less electron-dense granules with a finely granular appearance. The diameter of this finely granular material was around 21 nm and a fibrous structure was also observed in or attached to this granule.

  16. Linking granulation performance with residence time and granulation liquid distributions in twin-screw granulation: An experimental investigation

    DEFF Research Database (Denmark)

    Kumar, Ashish; Alakarjula, Maija; Vanhoorne, Valérie

    2016-01-01

    Twin-screw granulation is a promising wet granulation technique for the continuous manufacturing of pharmaceutical solid dosage forms. A twin screw granulator displays a short residence time. Thus, the solid-liquid mixing must be achieved quickly by appropriate arrangement of transport and kneading...... elements in the granulator screw allowing the production of granules with a size distribution appropriate for tableting. The distribution of residence time and granulation liquid is governed by the field conditions (such as location and length of mixing zones) in the twin-screw granulator, thus contain...... interesting information on granulation time, mixing and resulting sub-processes such as wetting, aggregation and breakage. In this study, the impact of process (feed rate, screw speed and liquid-to-solid ratio) and equipment parameters (number of kneading discs and stagger angle) on the residence time...

  17. Morphological variations and population density of membrane-coating granules in human gingival sulcular epithelium.

    Science.gov (United States)

    Braun, T B; Ashrafi, S H; Waterhouse, J P

    1990-01-01

    Surgically excised specimens of sulcular wall with minimal inflammatory response as judged by clinical then histological criteria were processed for electron microscopy. The specimens were divided into crestal, middle and cervical areas of the sulcular epithelium. The highest concentration of membrane-coating granules was found in the upper spinous cell layers of sulcular epithelium. The profiles of these granules showed examples of both classical keratinized (lamellated) and non-keratinized (non-lamellated) forms but also other appearances that were not derived from them through differences in the plane of section. The population of granules decreased between the crestal and cervical zones, and the decrease in number was marked for the lamellated granules. This decrease in numbers of membrane-coating granules, together with the wider intercellular spaces, may be the reason why the sulcular epithelium is most permeable in the cervical region.

  18. Observation of polyphosphate granules in cable bacteria

    Science.gov (United States)

    Yang, T.; Nielsen, L. P.; Risgaard-Petersen, N.

    2015-12-01

    Cable bacteria are long filamentous bacteria that capable for long distance electron transport: transporting electrons derived from oxidizing sulfide in anoxic layers, to oxygen at the sediment surface, over a distance of centimeters. Cable bacteria are found in many types of freshwater and marine sediment all over the world, with density of approximately thousands of kilometers per square meter. These long filaments are composed by individual cells closely related to Desulfobulbaceae, connected with a shared outer membrane inside which the strings structure are presumed to be highly conductive. The observed doubling time of cells within the filament is about 20 min, which is among the shortest compare to other bacteria. In these cable cells, we constantly observed polyphosphate granules (poly-P), regardless of cell dimension and shape. This is very interesting since it has long been recognized that the microbial polyP content is low during rapid growth and increases under unfavorable conditions, for example, increasing sulfide concentration and anoxia resulted in a decomposition of poly-P in Beggiatoa. Here, we investigated marine cable bacteria from Netherland and Aarhus Bay, focusing on the poly-P dynamics under various redox conditions. In poly-P stained cells, typically there are two big poly-P granules locate at each polar. In dividing cells, however, the morphology of poly-P changed to six small granules precisely arranged to two row. Moreover, the cells seem be able to continuously divide more than one time without elongation step. These varied poly-P morphologies demonstrate that poly-P is closely related to the cell growth and cell division, by an unknown mechanism. Individual cable filaments were picked up and were exposed to different redox conditions; our primary data indicated the cable cells could suffer anoxic condition better than oxic condition. We also detected decomposition of poly-P under anoxia. These results call for an in-depth examination

  19. Stability and repeatability of a continuous twin screw granulation and drying system.

    Science.gov (United States)

    Vercruysse, J; Delaet, U; Van Assche, I; Cappuyns, P; Arata, F; Caporicci, G; De Beer, T; Remon, J P; Vervaet, C

    2013-11-01

    The aim of this study was to investigate the process transfer of a commercially available product from the current batch fluid bed granulation and drying production method to an innovative continuously operating "from powder to tablet" production line using twin screw granulation as an intermediate granulation step. By monitoring process outcomes (torque, water temperature at the granulator jacket inlet, differential pressure over the dryer filters, and temperature mill screen) and granule and tablet quality in function of process time, the stability and repeatability during long production runs were determined. Three consecutive 5h "from powder to tablet" production runs were performed using the ConsiGma™-25 system (GEA Pharma Systems, Collette™, Wommelgem, Belgium). A premix of two active ingredients, powdered cellulose, maize starch, pregelatinized starch, and sodium starch glycolate was granulated with distilled water. After drying and milling (1000 μm and 800 rpm), granules were in-line blended with magnesium stearate and directly compressed using a Modul™ P tablet press (tablet weight: 430 mg, main compression force: 12 kN). Granule (loss on drying, particle size distribution, friability, flow) and tablet (weight uniformity, hardness, thickness, friability, content uniformity, disintegration time, and dissolution) quality was evaluated in function of process time. For each of the logged process outcomes, a stabilization period was needed to reach steady-state conditions. Slightly deviating particle size distribution and friability results for milled granules were observed during start-up due to initial layering of the mill screen. However, no deviating tablet quality was detected in function of process time. For multiple hours, granule and tablet quality was constant in function of process time. Furthermore, process data trends were highly repeatable. Consequently, the ConsiGma™-25 system can be considered as a stable and repeatable system for the

  20. Influence of granule characteristics on microstructure quality of compacts made from spray-dried powders

    Science.gov (United States)

    Balasubramanian, Sreeram

    Powder compaction is a widely used technique for the manufacture of high volume of ceramic components that have simple shapes and sizes. However, this technique is inherently prone to strength-limiting defects like large intergranular pores and remnants of the initial granule structure. These defects are a major obstacle that hinder the use of powder compaction to fabricate parts for applications where strength is an important criterion. The objective of this work is to understand the important factors that control the elimination of strength-limiting defects in compacts made from spray dried powders. The influence of granule density, internal lubricants, particle shape and external application of a plasticizer to already spray dried powders on compaction behavior was investigated. Emphasis was placed on role of these factors in the elimination of large intergranular pores and persistent granule interfaces. The powders were spray dried under varying conditions to tailor the granule characteristics, including granule density, granule size distribution, binder content and lubricant content. These powders were compacted at different pressures, and the microstructures of green and sintered compacts were then evaluated, and strength-limiting features were quantified. Comparisons were made on the basis of compaction curves, green strength, green density and microstructure quality at different pressures. Lowering the granule density reduced the number of granule relics and large intergranular pores. The presence of an internal lubricant improved particle packing and yielded compacts with higher green density and fewer large intergranular pores at comparable pressures. Spray dried powders with the externally applied plasticizer deformed at lower compaction pressures. This allowed easier knitting of particles across granule interfaces and elimination of large intergranular pores and persistent granule interfaces. Spherical (equiaxed) particles rearranged better at granule

  1. Variation of granule mass fraction with coordination number in wet granulation process

    Institute of Scientific and Technical Information of China (English)

    Papiya Roy; Manish Vashishtha; Rajesh Khanna; Duwuri Subbarao

    2009-01-01

    In granulation, fine particles combine to form a coarse granule in the form of a particle matrix partially or fully saturated with a binder liquid. The final product of granulation possesses a wide variety of granule size distributions with surface mean diameters which differ with operating conditions. The final granule size depends on the operating conditions, e.g. operating gas velocity, inlet air temperature, initial feed particle size, and viscosity of the binder. The objective of this paper is to find out the uniformity in the relation between the granule mass fraction in the final granule size distribution and the number of feed particles present in the granules. The total number of granules obtained depends on the experimental conditions but the granule mass fraction and the number of feed particles forming a single granule are independent of operating variables, feed material and method of granulation. The paper purports further to compare the uniform nature of mass fraction of the granules in final granule size distribution and the primary particles required to form that particular granule size irrespective of experimental conditions of granulation.

  2. Statistical analysis and comparison of a continuous high shear granulator with a twin screw granulator: Effect of process parameters on critical granule attributes and granulation mechanisms.

    Science.gov (United States)

    Meng, Wei; Kotamarthy, Lalith; Panikar, Savitha; Sen, Maitraye; Pradhan, Shankali; Marc, Michaelis; Litster, James D; Muzzio, Fernando J; Ramachandran, Rohit

    2016-11-20

    This study is concerned with identifying the design space of two different continuous granulators and their respective granulation mechanisms. Performance of a continuous high shear granulator and a twin screw granulator with paracetamol formulations were examined by face-centered cubic design, which focused on investigating key performance metrics, namely, granule size, porosity, flowability and particle morphology of granules as a function of essential input process parameters (liquid content, throughput and rotation speed). Liquid and residence time distribution tests were also performed to gain insights into the liquid-powder mixing and flow behavior. The results indicated that continuous high shear granulation was more sensitive to process variation and produced spherical granules with monomodal size distribution and distinct internal structure and strength variation. Twin screw granulation with such a particular screw configuration showed narrower design space and granules were featured with multimodal size distribution, irregular shape, less detectible porosity difference and tighter range of strength. Granulation mechanisms explored on the basis of nucleation and growth regime maps revealed that for most cases liquid binder was uniformly distributed with fast droplet penetration into the powder bed and that granule consolidation and coalescence mainly took place in the nucleation, steady growth and rapid growth regimes.

  3. Regulation of secretory granule size by the precise generation and fusion of unit granules.

    Science.gov (United States)

    Hammel, Ilan; Lagunoff, David; Galli, Stephen J

    2010-07-01

    Morphometric evidence derived from studies of mast cells, pancreatic acinar cells and other cell types supports a model in which the post-Golgi processes that generate mature secretory granules can be resolved into three steps: (1) fusion of small, Golgi-derived progranules to produce immature secretory granules which have a highly constrained volume; (2) transformation of such immature granules into mature secretory granules, a process often associated with a reduction in the maturing granule's volume, as well as changes in the appearance of its content and (3) fusion of secretory granules of the smallest size, termed 'unit granules', forming granules whose volumes are multiples of the unit granule's volume. Mutations which perturb this process can cause significant pathology. For example, Chediak-Higashi syndrome / lysosomal trafficking regulator (CHS)/(Lyst) mutations result in giant secretory granules in a number of cell types in human beings with the Chediak-Higashi syndrome and in 'beige' (Lyst(bg)/Lyst(bg)) mice. Analysis of the secretory granules of mast cells and pancreatic acinar cells in Lyst-deficient beige mice suggests that beige mouse secretory granules retain the ability to fuse randomly with other secretory granules no matter what the size of the fusion partners. By contrast, in normal mice, the pattern of granule-granule fusion occurs exclusively by the addition of unit granules, either to each other or to larger granules. The normal pattern of fusion is termed unit addition and the fusion evident in cells with CHS/Lyst mutations is called random addition. The proposed model of secretory granule formation has several implications. For example, in neurosecretory cells, the secretion of small amounts of cargo in granules constrained to a very narrow size increases the precision of the information conveyed by secretion. By contrast, in pancreatic acinar cells and mast cells, large granules composed of multiple unit granules permit the cells to store

  4. Selective sorting of alpha-granule proteins.

    Science.gov (United States)

    Italiano, J E; Battinelli, E M

    2009-07-01

    One of the main functions of blood platelets is to secrete a variety of substances that can modify a developing thrombus, regulate the growth of the vasculature, promote wound repair, and contribute to cell-adhesive events. A majority of this vast array of secreted proteins are stored in alpha-granules. Until recently, it was assumed that platelets contained one homogeneous population of alpha-granules that undergo complete de-granulation during platelet activation. This review focuses on the mechanisms of alpha-granule biogenesis and secretion, with a particular emphasis on recent findings that clearly demonstrate that platelets contain distinct subpopulations of alpha-granules that undergo differential release during activation. We consider the implications of this new paradigm of platelet secretion, discuss mechanisms of alpha-granule biogenesis, and review the molecular basis of transport and delivery of alpha-granules to assembling platelets.

  5. Effect of insulating layer material on RF-induced heating for external fixation system in 1.5 T MRI system.

    Science.gov (United States)

    Liu, Yan; Kainz, Wolfgang; Qian, Songsong; Wu, Wen; Chen, Ji

    2014-09-01

    The radio frequency (RF)-induced heating is a major concern when patients with medical devices are placed inside a magnetic resonance imaging (MRI) system. In this article, numerical studies are applied to investigate the potentials of using insulated materials to reduce the RF heating for external fixation devices. It is found that by changing the dielectric constant of the insulation material, the RF-induced heating at the tips of devices can be altered. This study indicates a potential technique of developing external fixation device with low MRI RF heating.

  6. Surface Modification of Porous Titanium Granules for Improving Bioactivity.

    Science.gov (United States)

    Karaji, Zahra Gorgin; Houshmand, Behzad; Faghihi, Shahab

    The highly porous titanium granules are currently being used as bone substitute material and for bone tissue augmentation. However, they suffer from weak bone bonding ability. The aim of this study was to create a nanostructured surface oxide layer on irregularly shaped titanium granules to improve their bioactivity. This could be achieved using optimized electrochemical anodic oxidation (anodizing) and heat treatment processes. The anodizing process was done in an ethylene glycol-based electrolyte at an optimized condition of 60 V for 3 hours. The anodized granules were subsequently annealed at 450°C for 1 hour. Scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDS), and x-ray diffraction (XRD) were used to characterize the surface structure and morphology of the granules. The in vitro bioactivity of the samples was evaluated by immersion of specimens in simulated body fluid (SBF) for 1, 2, and 3 weeks. The human osteoblastic sarcoma cell line, MG63, was used to evaluate cell viability on the samples using dimethylthiazol-diphenyl tetrazolium bromide (MTT) assay. The results demonstrated the formation of amorphous nanostructured titanium oxide after anodizing, which transformed to crystalline anatase and rutile phases upon heat treatment. After immersion in SBF, spherical aggregates of amorphous calcium phosphate were formed on the surface of the anodized sample, which turned into crystalline hydroxyapatite on the surface of the anodized annealed sample. No cytotoxicity was detected among the samples. It is suggested that anodic oxidation followed by heat treatment could be used as an effective surface treatment procedure to improve bioactivity of titanium granules implemented for bone tissue repair and augmentation.

  7. Indentations on Air Plasma Sprayed Thermal Barrier Coatings Prepared by Different Starting Granules

    Directory of Open Access Journals (Sweden)

    Yong Suk Heo

    2015-01-01

    Full Text Available The effect of starting granules on the indentation properties of air plasma sprayed thermal barrier coatings (TBCs is investigated in this paper. Various kinds of spray-dried granules are prepared from different processing conditions, especially varying solvent and dispersant, showing a deformed hollow-typed and a filled spherical-typed granule. The similar coating thicknesses are prepared by adjusting process parameters during air plasma spray. All XRD peaks in phase analysis are tetragonal and cubic phases without any monoclinic phase after the starting granules were heat-treated. A relatively porous microstructure of the coating layer could be obtained from the monodisperse granules, while a relatively dense microstructure resulted from the hollow-typed granules. The morphology and distribution of the granules crucially affect the microstructure of thermal barrier coatings and thus have influences on indentation properties such as indentation stress-strain curves, contact damage, and hardness. The implication concerning microstructure design of TBCs for gas turbine applications is considered.

  8. Dendritic morphology, synaptic transmission, and activity of mature granule cells born following pilocarpine-induced status epilepticus in the rat

    Directory of Open Access Journals (Sweden)

    Fei eGao

    2015-10-01

    Full Text Available To understand the potential role of enhanced hippocampal neurogenesis after pilocarpine-induced status epilepticus (SE in the development of epilepsy, we quantitatively analyzed the geometry of apical dendrites, synaptic transmission, and activation levels of normotopically distributed mature newborn granule cells in the rat.SE in male Sprague-Dawley rats lasting for more than 2 hours was induced by an intraperitoneal injection of pilocarpine. The complexity, spine density, miniature post-synaptic currents, and activity-regulated cytoskeleton-associated protein (Arc expression of granule cells born five days after SE were studied at least 10 weeks after CAG-GFP retroviral vector-mediated labeling.Mature granule cells born after SE had dendritic complexity similar to that of granule cells born naturally, but with denser mushroom-like spines in dendritic segments located in the outer molecular layer. Miniature inhibitory post-synaptic currents (mIPSCs were similar between the controls and rats subjected to SE; however, smaller miniature excitatory post-synaptic current (mEPSC amplitude with a trend toward less frequent was found in mature granule cells born after SE. After maturation, granule cells born after SE did not show denser Arc expression in the resting condition or after being activated by transient seizure activity than vicinal GFP-unlabeled granule cells.Thus our results suggest that normotopic granule cells born after pilocarpine-induced SE are no more active when mature than age-matched, naturally born granule cells.

  9. The Role of Granule Size on the Kinetics of Electrochemical Reduction of SiO2 Granules in Molten CaCl2

    Science.gov (United States)

    Yang, Xiao; Yasuda, Kouji; Nohira, Toshiyuki; Hagiwara, Rika; Homma, Takayuki

    2016-02-01

    As a fundamental study to develop a new process for producing solar-grade silicon, the effect of granule size on the kinetics of the electrochemical reduction of SiO2 granules in molten CaCl2 was investigated. SiO2 granules with different size ranges were electrolyzed in molten CaCl2 at 1123 K (850 °C). The reduction kinetics was evaluated on the basis of the growth rate of the reduced Si layer and the behavior of the current during electrolysis. The results indicated that finer SiO2 granules are more favorable for a high reduction rate because the contact resistance between the bottom Si plate and the reduced Si particles is small and the diffusion of O2- ions in CaCl2 inside the porous Si shell is easy. Electrolysis using SiO2 granules less than 0.1 mm in size maintained a current density of no less than 0.4 A cm-2 within 20 minutes, indicating that the electrochemical reduction of fine SiO2 granules in molten CaCl2 has the potential of becoming a high-yield production process for solar-grade silicon.

  10. Twin screw granulation - review of current progress.

    Science.gov (United States)

    Thompson, M R

    2015-01-01

    Twin screw granulation (TSG) is a new process of interest to the pharmaceutical community that can continuously wet granulate powders, doing so at lower liquid concentrations and with better product consistency than found by a high shear batch mixer. A considerable body of research has evolved over the short time since this process was introduced but generally with little comparison of results. A certain degree of confidence has been developed through these studies related to how process variables and many attributes of machinery configuration will affect granulation but some major challenges still lay ahead related to scalability, variations in the processing regimes related to degree of channel fill and the impact of wetting and granulation of complex powder formulations. This review examines the current literature for wet granulation processes studied in twin screw extrusion machinery, summarizing the influences of operational and system parameters affecting granule properties as well as strives to provide some practical observations to newly interested users of the technique.

  11. Selective sorting of alpha-granule proteins

    OpenAIRE

    Italiano, J.E.; Battinelli, E. M.

    2009-01-01

    One of the main functions of blood platelets is to secrete a variety of substances that can modify a developing thrombus, regulate the growth of the vasculature, promote wound repair, and contribute to cell-adhesive events. The majority of this vast array of secreted proteins is stored in alpha-granules. Until recently, it was assumed that platelets contained one homogeneous population of alpha-granules that undergo complete de-granulation during platelet activation. This review focuses on th...

  12. The extrusion properties of potato granules

    OpenAIRE

    Kooi, Eng Teong

    1982-01-01

    Potato granules from different sources were found, on extrusion, to produce potato snacks of variable quality. In some instances strip formation was unsatisfactory, in other instances blistering of the snack occurred on frying. In total, about 20-25 batches of potato granules were examined and classified in relation to these two phenomena. The amylose/amylopectin ratios of these samples of potato granules were determined by the semi-micro potentiometric iodine titration technique, but it was ...

  13. Fluidization of wet granulates under shear.

    Science.gov (United States)

    Rahbari, S H Ebrahimnazhad; Vollmer, J; Herminghaus, S; Brinkmann, M

    2010-12-01

    Small amounts of a wetting liquid render sand a stiff and moldable material. The cohesive forces between the sand grains are caused by capillary bridges at the points of contact. Due to the finite strength of these bridges wet sand undergoes a transition from an arrested (i.e., solidified) to a fluidized state under an externally applied shear force. The transition between these two dynamic states is studied in a MD-type simulation of a two-dimensional assembly of bidisperse frictionless disks under the action of a cosine force profile. In addition to soft core repulsion the disks interact through a hysteretic and short ranged attractive force modeling the effect of the capillary bridges. In this model the transition between the fluidized and the arrested state is discontinuous and hysteretic. The parameter dependence of the critical force for solidification is modeled by combining theoretical arguments with a detailed numerical exploration of the transition. We address a range of densities from slightly below close packing until slightly above densities where the system approaches a shear-banded state. Differences and similarities of the transition in wet granulates to the jamming transition are also addressed.

  14. Medical image of the week: granulation tissue

    Directory of Open Access Journals (Sweden)

    Ganesh A

    2014-03-01

    Full Text Available A 57 year old woman presented with a tickling sensation in the back of throat and intermittent bleeding from the healing stoma one month after decannulation of her tracheostomy tube. On bronchoscopy a granuloma with surrounding granulation tissue was present in the subglottic space (Figure 1. Argon plasma coagulation (APC was performed to cauterize the granulation tissue (Figure 2. Formation of granulation tissue after tracheostomy is a common complication which can result in tracheal stenosis. APC and electrocautery using flexible bronchoscopy has been shown to safely and effectively remove the granulation tissue.

  15. Mechanism of film formation during granules capsulation in fluidized bed

    OpenAIRE

    Ostroha, Ruslan; Yukhymenko, Mykola

    2013-01-01

    It is proposed to perform granules capsulation process in the device of fluidized bed. Analysis of different approaches to mathematical description of granules growth kinetics was made. Equation of size determination of received granules in the device is proposed including granules growth rate and changes of density of granules distribution according to sizes in film forming process.

  16. Granulation of coal fly ash by using different types of granule agents

    Science.gov (United States)

    Agusta, H.; Nisya, F. N.; Iman, R. N.; Bilad, D. B. C.

    2017-05-01

    The use of coal produces about 5% solid pollutant in the form of ash (fly ash and bottom ash). Of the total ash produced, about 10-20% is bottom ash and 80-90% is fly ash. This study was aimed at obtaining a type of adhesive which could be used as a fly granulation material for soil conditioner. The study was conducted at the pilot plant of Surfactant and Bioenergy Research Center (SBRC) LPPM IPB from April to August 2016. The fly ash used in this study was obtained from Kalimantan. A pan granulator was used in fly ash granule making process. Granule agent materials were diluted in the concentration of 5, 10, and 15%. Different types of granule agents, namely SBRC-M, SBRC-T, and SBRC-SC were used. The formed fly ash granules were then analyzed for their physical properties including particle density, fly ash granule pH, fly ash granule durability, and fly ash granule water holding capacity. Results showed that fly ash granules made from 15% of SBRC-M had the highest particle density (0.75 g/cm3). Fly ash granules made with SBRC-M had higher pH (10) than those made by using SBRC-SC adhesive (9.3) and SBRC-T (9). SBRC-T was found as the granule agent material which produced fly ash granules with the highest durability levels on average. In this study, the use of SBRC-M granule agent resulted in higher water holding capacity (WHC) (40.62%) than did SBRC-SC (38.79%) and SBRC-T (36.85%). As a granule agent, compared to SBRC-SC and SBRC-T, SBRC-M could produce fly ash granules with highest particle density, highest pH, good durability, and best water holding capacity.

  17. Functional alpha7 nicotinic receptors are expressed on immature granule cells of the postnatal dentate gyrus.

    Science.gov (United States)

    John, Danielle; Shelukhina, Irina; Yanagawa, Yuchio; Deuchars, Jim; Henderson, Zaineb

    2015-03-19

    Neurogenesis occurs throughout life in the subgranular zone of the dentate gyrus, and postnatal-born granule cells migrate into the granule cell layer and extend axons to their target areas. The α7*nicotinic receptor has been implicated in neuronal maturation during development of the brain and is abundant in interneurons of the hippocampal formation of the adult brain. Signalling through these same receptors is believed also to promote maturation and integration of adult-born granule cells in the hippocampal formation. We therefore aimed to determine whether functional α7*nicotinic receptors are expressed in developing granule cells of the postnatal dentate gyrus. For these experiments we used 2-3 week-old Wistar rats, and 2-9 week old transgenic mice in which GABAergic interneurons were marked by expression of green fluorescent protein. Immunohistochemistry indicated the presence of α7*nicotinic receptor subunits around granule cells close around the subgranular zone which correlated with the distribution of developmental markers for immature granule cells. Whole-cell patch clamp recording showed that a proportion of granule cells responded to puffed ACh in the presence of atropine, and that these cells possessed electrophysiological properties found in immature granule cells. The nicotinic responses were potentiated by an allosteric α7*nicotinic receptor modulator, which were blocked by a specific α7*nicotinic receptor antagonist and were not affected by ionotropic glutamate or GABA receptor antagonists. These results suggest the presence of functional somato-dendritic α7*nicotinic receptors on immature granule cells of the postnatal dentate gyrus, consistent with studies implicating α7*nicotinic receptors in dendritic maturation of dentate gyrus neurons in adult brain. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

  18. Rate limiting factors in trichloroethylene co-metabolic degradation by phenol-grown aerobic granules.

    Science.gov (United States)

    Zhang, Yi; Tay, Joo Hwa

    2014-04-01

    The potential of aerobic granular sludge in co-metabolic removal of recalcitrant substances was evaluated using trichloroethylene (TCE) as the model compound. Aerobic granules cultivated in a sequencing batch reactor with phenol as the growth substrate exhibited TCE and phenol degradation activities lower than previously reported values. Depletion of reducing energy and diffusion limitation within the granules were investigated as the possible rate limiting factors. Sodium formate and citrate were supplied to the granules in batch studies as external electron sources. No significant enhancing effect was observed on the instant TCE transformation rates, but 10 mM formate could improve the ultimate transformation capacity by 26 %. Possible diffusion barrier was studied by sieving the biomass into five size fractions, and determining their specific TCE and phenol degradation rates and capacities. Biomass in the larger size fractions generally showed lower activities. Large granules of >700 μm diameter exhibited only 22 % of the flocs' TCE transformation capacity and 35 % of its phenol dependent SOUR, indicating the possible occurrence of diffusion limitation in larger biomass. However, the highest specific TCE transformation rate was observed with the fraction that mostly consisted of small granules (150-300 μm), suggesting an optimal size range while applying aerobic granules in TCE co-metabolic removal.

  19. Granule exocytosis is required for platelet spreading: differential sorting of α-granules expressing VAMP-7.

    Science.gov (United States)

    Peters, Christian G; Michelson, Alan D; Flaumenhaft, Robert

    2012-07-01

    There has been recent controversy as to whether platelet α-granules represent a single granule population or are composed of different subpopulations that serve discrete functions. To address this question, we evaluated the localization of vesicle-associated membrane proteins (VAMPs) in spread platelets to determine whether platelets actively sort a specific subpopulation of α-granules to the periphery during spreading. Immunofluorescence microscopy demonstrated that granules expressing VAMP-3 and VAMP-8 localized to the central granulomere of spread platelets along with the granule cargos von Willebrand factor and serotonin. In contrast, α-granules expressing VAMP-7 translocated to the periphery of spread platelets along with the granule cargos TIMP2 and VEFG. Time-lapse microscopy demonstrated that α-granules expressing VAMP-7 actively moved from the granulomere to the periphery during spreading. Platelets from a patient with gray platelet syndrome lacked α-granules and demonstrated only minimal spreading. Similarly, spreading was impaired in platelets obtained from Unc13d(Jinx) mice, which are deficient in Munc13-4 and have an exocytosis defect. These studies identify a new α-granule subtype expressing VAMP-7 that moves to the periphery during spreading, supporting the premise that α-granules are heterogeneous and demonstrating that granule exocytosis is required for platelet spreading.

  20. The paradox of high shear granulation : the formation of non-homogeneous granules

    NARCIS (Netherlands)

    Dries, Kaspar van den

    2004-01-01

    Wet granulation is a process used for the particle size enlargement of primary powders. The mixing of a liquid with the powder glues the primary particles together, which results in the formation of the granules. The mixing action can be performed in many ways, like tumbling (drum granulation), flui

  1. Granule fraction inhomogeneity of calcium carbonate/sorbitol in roller compacted granules

    DEFF Research Database (Denmark)

    Bacher, Charlotte; Olsen, P.M.; Bertelsen, P.;

    2008-01-01

    The granule fraction inhomogeneity of roller compacted granules was examined on mixtures of three different morphologic forms of calcium carbonate and three particle sizes of sorbitol. The granule fraction inhomogeneity was determined by the distribution of the calcium carbonate in each of the 10...

  2. Mitotic Events in Cerebellar Granule Progenitor Cells that Expand Cerebellar Surface Area Are Critical for Normal Cerebellar Cortical Lamination in Mice

    Science.gov (United States)

    Chang, Joshua C.; Leung, Mark; Gokozan, Hamza Numan; Gygli, Patrick Edwin; Catacutan, Fay Patsy; Czeisler, Catherine; Otero, José Javier

    2015-01-01

    Late embryonic and postnatal cerebellar folial surface area expansion promotes cerebellar cortical cytoarchitectural lamination. We developed a streamlined sampling scheme to generate unbiased estimates of murine cerebellar surface area and volume using stereological principles. We demonstrate that during the proliferative phase of the external granule layer (EGL) and folial surface area expansion, EGL thickness does not change and thus is a topological proxy for progenitor self-renewal. The topological constraints indicate that during proliferative phases, migration out of the EGL is balanced by self-renewal. Progenitor self-renewal must, therefore, include mitotic events yielding either 2 cells in the same layer to increase surface area (β-events) and mitotic events yielding 2 cells, with 1 cell in a superficial layer and 1 cell in a deeper layer (α-events). As the cerebellum grows, therefore, β-events lie upstream of α-events. Using a mathematical model constrained by the measurements of volume and surface area, we could quantify inter-mitotic times for β-events on a per-cell basis in post-natal mouse cerebellum. Furthermore, we found that loss of CCNA2, which decreases EGL proliferation and secondarily induces cerebellar cortical dyslamination, shows preserved α-type events. Thus, CCNA2-null cerebellar granule progenitor cells are capable of self-renewal of the EGL stem cell niche; this is concordant with prior findings of extensive apoptosis in CCNA2-null mice. Similar methodologies may provide another layer of depth to the interpretation of results from stereological studies. PMID:25668568

  3. Regulated protein aggregation: stress granules and neurodegeneration

    Directory of Open Access Journals (Sweden)

    Wolozin Benjamin

    2012-11-01

    Full Text Available Abstract The protein aggregation that occurs in neurodegenerative diseases is classically thought to occur as an undesirable, nonfunctional byproduct of protein misfolding. This model contrasts with the biology of RNA binding proteins, many of which are linked to neurodegenerative diseases. RNA binding proteins use protein aggregation as part of a normal regulated, physiological mechanism controlling protein synthesis. The process of regulated protein aggregation is most evident in formation of stress granules. Stress granules assemble when RNA binding proteins aggregate through their glycine rich domains. Stress granules function to sequester, silence and/or degrade RNA transcripts as part of a mechanism that adapts patterns of local RNA translation to facilitate the stress response. Aggregation of RNA binding proteins is reversible and is tightly regulated through pathways, such as phosphorylation of elongation initiation factor 2α. Microtubule associated protein tau also appears to regulate stress granule formation. Conversely, stress granule formation stimulates pathological changes associated with tau. In this review, I propose that the aggregation of many pathological, intracellular proteins, including TDP-43, FUS or tau, proceeds through the stress granule pathway. Mutations in genes coding for stress granule associated proteins or prolonged physiological stress, lead to enhanced stress granule formation, which accelerates the pathophysiology of protein aggregation in neurodegenerative diseases. Over-active stress granule formation could act to sequester functional RNA binding proteins and/or interfere with mRNA transport and translation, each of which might potentiate neurodegeneration. The reversibility of the stress granule pathway also offers novel opportunities to stimulate endogenous biochemical pathways to disaggregate these pathological stress granules, and perhaps delay the progression of disease.

  4. The Stagger-grid: A grid of 3D stellar atmosphere models - VI. Surface appearance of stellar granulation

    CERN Document Server

    Magic, Zazralt

    2014-01-01

    In the surface layers of late-type stars, stellar convection is manifested with its typical granulation pattern due to the presence of convective motions. The resulting photospheric up- and downflows leave imprints in the observed spectral line profiles. We perform a careful statistical analysis of stellar granulation and its properties for different stellar parameters. We employ realistic 3D radiative hydrodynamic (RHD) simulations of surface convection from the Stagger-grid, a comprehensive grid of atmosphere models that covers a large parameter space in terms of Teff, logg, and [Fe/H]. Individual granules are detected from the (bolometric) intensity maps at disk center with an efficient granulation pattern recognition algorithm. From these we derive their respective properties: diameter, fractal dimension (area-perimeter relation), geometry, topology, variation of intensity, temperature, density and velocity with granule size. Also, the correlation of the physical properties at the optical surface are stud...

  5. Artificial neural network modelling of continuous wet granulation using a twin-screw extruder.

    Science.gov (United States)

    Shirazian, Saeed; Kuhs, Manuel; Darwish, Shaza; Croker, Denise; Walker, Gavin M

    2017-04-15

    Computational modelling of twin-screw granulation was conducted by using an artificial neural network (ANN) approach. Various ANN configurations were considered with changing hidden layers, nodes and activation functions to determine the optimum model for the prediction of the process. The neural networks were trained using experimental data obtained for granulation of pure microcrystalline cellulose using a 12mm twin-screw extruder. The experimental data were obtained for various liquid binder (water) to solid ratios, screw speeds, material throughputs, and screw configurations. The granulate particle size distribution, represented by d-values (d10, d50, d90) were considered the response in the experiments and the ANN model. Linear and non-linear activation functions were taken into account in the simulations and more accurate results were obtained for non-linear function in terms of prediction. Moreover, 2 hidden layers with 2 nodes per layer and 3-Fold cross-validation method gave the most accurate simulation. The results revealed that the developed ANN model is capable of predicting granule size distribution in high-shear twin-screw granulation with a high accuracy in different conditions, and can be used for implementation of model predictive control in continuous pharmaceutical manufacturing.

  6. Twin screw wet granulation: Binder delivery.

    Science.gov (United States)

    Saleh, Mohammed F; Dhenge, Ranjit M; Cartwright, James J; Hounslow, Michael J; Salman, Agba D

    2015-06-20

    The effects of three ways of binder delivery into the twin screw granulator (TSG) on the residence time, torque, properties of granules (size, shape, strength) and binder distribution were studied. The binder distribution was visualised through the transparent barrel using high speed imaging as well as quantified using offline technique. Furthermore, the effect of binder delivery and the change of screw configuration (conveying elements only and conveying elements with kneading elements) on the surface velocity of granules across the screw channel were investigated using particle image velocimetry (PIV). The binder was delivered in three ways; all solid binder incorporated with powder mixture, 50% of solid binder mixed with powder mixture and 50% mixed with water, all the solid binder dissolved in water. Incorporation of all solid binder with powder mixture resulted in the relatively longer residence time and higher torque, narrower granule size distribution, more spherical granules, weaker big-sized granules, stronger small-sized granules and better binder distribution compared to that in other two ways. The surface velocity of granules showed variation from one screw to another as a result of uneven liquid distribution as well as shown a reduction while introducing the kneading elements into the screw configuration.

  7. Autophagy meets FUS-positive Stress Granules

    Science.gov (United States)

    Matus, Soledad; Bosco, Daryl A.; Hetz, Claudio

    2015-01-01

    Mutations in fused in sarcoma/translocated in liposarcoma (FUS/TLS or FUS) are linked to familial cases of amyotrophic lateral sclerosis (ALS). Mutant FUS selectively accumulates into discrete cytosolic structures known as stress granules under various stress conditions. In addition, mutant FUS expression can alter the dynamics and morphology of stress granules. Although the link between mutant-FUS and stress granules is well established, the mechanisms modulating stress granule formation and disassembly in the context of ALS are poorly understood. In this issue of Neurobiology of Aging, Ryu and coworkers uncover the impact of autophagy on the potential toxicity of mutant-FUS positive stress granules. The authors provide evidence indicating that enhanced autophagy activity reduces the number of stress granules, which in the case of cells containing mutant-FUS positive stress granules, is neuroprotective. Overall, this study identifies an intersection between the proteostasis network and alterations in RNA metabolism in ALS through the dynamic assembly and disassembly of stress granules. PMID:25444610

  8. Fluidized bed spray granulation: analysis of heat and mass transfers and dynamic particle populations

    Directory of Open Access Journals (Sweden)

    S. Heinrich

    2005-06-01

    Full Text Available A model was developed taking into consideration the heat and mass transfer processes in liquid-sprayed fluidized beds. Such fluidized beds (FB are used for granulation, coating and agglomeration. Conclusions are drawn on the relevance of particle dispersion, spraying and drying to temperature and concentrations distributions. In extension, the model was coupled with a population balance model to describe the particle size distribution and the seeds formation for continuous external FBSG (fluidized bed spray granulation with non-classifying product discharge and a screening and milling unit in the seeds recycle. The effects of seeds formation on the stability of the process is discussed.

  9. Continuous twin screw granulation: influence of process variables on granule and tablet quality.

    Science.gov (United States)

    Vercruysse, J; Córdoba Díaz, D; Peeters, E; Fonteyne, M; Delaet, U; Van Assche, I; De Beer, T; Remon, J P; Vervaet, C

    2012-09-01

    The aim of the current study was to screen theophylline (125 mg) tablets manufactured via twin screw granulation in order to improve process understanding and knowledge of process variables that determine granule and tablet quality. A premix of theophylline anhydrate, α-lactose monohydrate and PVP (ratio: 30/67.5/2.5,w/w) was granulated with demineralized water. Experiments were done using the high-shear wet granulation module (based on twin screw granulation) of the ConsiGma™-25 unit (a continuous tablet manufacturing system) for particle size enlargement. After drying, granules were compressed using a MODUL™ P tablet press (compression force: 10 kN, tablet diameter: 12 mm). Using a D-optimal experimental design, the effect of several process variables (throughput (10-25 kg/h), screw speed (600-950 rpm), screw configuration (number (2, 4, 6 and 12) and angle (30°, 60° and 90°) of kneading elements), barrel temperature (25-40°C) and method of binder addition (dry versus wet)) on the granulation process (torque and temperature increase in barrel wall), granule (particle size distribution, friability and flowability) and tablet (tensile strength, porosity, friability, disintegration time and dissolution) quality was evaluated. The results showed that the quality of granules and tablets can be optimized by adjusting specific process variables (number of kneading elements, barrel temperature and binder addition method) during a granulation process using a continuous twin screw granulator.

  10. Development of granules from phyllanthus niruri spray-dried extract

    OpenAIRE

    Tatiane Pereira de Souza; José Luiz Gómez-Amoza; Ramón Martínez Pacheco; Pedro Ros Petrovick

    2009-01-01

    The aim of this study was to develop granules from Phyllanthus niruri spray-dried extract using dry and wet granulation and to assess techniques to enable the production of granules with improved technological characteristics and yields. Granules were characterized by granulometry, reological parameters, compression and hygroscopic behavior. Independent of the granulation technique, technologically developed granules presented particle diameter, bulk and tapped densities and compressibility i...

  11. Preparation and evaluation of granules with pH-dependent release by melt granulation.

    Science.gov (United States)

    Shiino, Kai; Iwao, Yasunori; Fujinami, Yukari; Itai, Shigeru

    2012-07-15

    This study had two objectives: (1) to prepare, by melt granulation in a high-shear mixer, granules containing acetaminophen (APAP) as a model drug and aminoalkyl methacrylate copolymer E (AMCE) as a pH-sensitive polymer that readily dissolves at pH values lower than 5, and (2) to investigate the effects of AMCE loading (5-15%) on granule properties and the in vitro release profile of drug from the granules. Compared with polymer-free granules, the granules containing 5% and 10% AMCE were found to have higher median diameters and wider particle size distributions. For the formulation containing 15% AMCE, on the other hand, the diameters and distribution were similar to those for polymer-free granules. From compression testing, load-displacement curves revealed that AMCE enhanced particle strength at ambient temperature and induced plastic strain, while suppressing fragmentation of the granules. In addition, from dissolution testing using media with pH 4.0 and pH 6.5, granules containing AMCE, except 15% AMCE loading, exhibited drug release with significant pH dependence. When the pH 4.0 and pH 6.5 dissolution profiles were further compared by calculating the difference factor (f(1)), the 5% AMCE granules showed the strongest pH dependence of drug release among all formulations in this study. Large cracks and breakage were observed on the surface of 10% AMCE granules after they were used in dissolution testing. The obtained results are attributed to the plastic strain properties of AMCE above its glass transition temperature, and to the irregular distribution of AMCE within granules. Hence, this study has demonstrated for the first time that the combination of melt granulation and AMCE incorporation enables the formulation of novel functional granules that exhibit pH-dependent release of the active ingredient. Copyright © 2012 Elsevier B.V. All rights reserved.

  12. Sonic hedgehog-induced histone deacetylase activation is required for cerebellar granule precursor hyperplasia in medulloblastoma.

    Directory of Open Access Journals (Sweden)

    Seung Joon Lee

    Full Text Available Medulloblastoma, the most common pediatric brain tumor, is thought to arise from deregulated proliferation of cerebellar granule precursor (CGP cells. Sonic hedgehog (Shh is the primary mitogen that regulates proliferation of CGP cells during the early stages of postnatal cerebellum development. Aberrant activation of Shh signaling during this time has been associated with hyperplasia of CGP cells and eventually may lead to the development of medulloblastoma. The molecular targets of Shh signaling involved in medulloblastoma formation are still not well-understood. Here, we show that Shh regulates sustained activation of histone deacetylases (HDACs and that this activity is required for continued proliferation of CGP cells. Suppression of HDAC activity not only blocked the Shh-induced CGP proliferation in primary cell cultures, but also ameliorated aberrant CGP proliferation at the external germinal layer (EGL in a medulloblastoma mouse model. Increased levels of mRNA and protein of several HDAC family members were found in medulloblastoma compared to wild type cerebellum suggesting that HDAC activity is required for the survival/progression of tumor cells. The identification of a role of HDACs in the early steps of medulloblastoma formation suggests there may be a therapeutic potential for HDAC inhibitors in this disease.

  13. Identification of MMP-2 as a novel enhancer of cerebellar granule cell proliferation.

    Science.gov (United States)

    Verslegers, Mieke; Van Hove, Inge; Buyens, Tom; Dekeyster, Eline; Knevels, Ellen; Moons, Lieve

    2013-11-01

    During the first postnatal days in the mouse, granule cells (GCs) undergo massive proliferation, which then gradually decreases. Matrix metalloproteinase-2 (MMP-2), a Zn(2+)-dependent proteolytic enzyme, is involved in a wide variety of pathological and physiological pathways. Evidence for a role of this proteinase in cell proliferation is emerging, reporting its involvement in pathological proliferation, as well as during neurogenesis and developmental proliferation of non-CNS tissues. In this study, MMP-2 protein expression was observed within the early postnatal cerebellar cortex, predominantly in Purkinje cells and within the GC proliferative zone, i.e. the superficial external granular layer (EGL). Consistently, the spatiotemporal MMP-2 mRNA and protein profiles highly correlated with the peak of GC precursor (GCP) proliferation and detailed morphometric analyses of MMP-2 deficient cerebella revealed a thinner EGL due to a decreased GCP proliferation. BrdU cumulative experiments, performed to measure the length of different cell cycle phases, further disclosed a transiently prolonged S-phase in MMP-2 deficient GCPs during early cerebellar development. In consequence, MMP-2 deficient animals displayed a transient delay in GC migration towards the IGL. In conclusion, our findings provide important evidence for a role for MMP-2 in neuronal proliferation and cell cycle kinetics in the developing CNS.

  14. THE STUDY OF THE KINETIC OF NATURAL ZEOLITE GRANULES GROWTH AT DIFFERENT WAYS OF GRANULATION

    Directory of Open Access Journals (Sweden)

    Rybachuk VD

    2016-12-01

    Full Text Available Introduction. Active substances and excipients used in the manufacture of medicines in tablet form, in most cases, have poor technological properties. This fact determines the need for prior granulation of mass before compression. Granulators of various sizes and designs, running on different modes, made the formation, growth and consolidation of the powder particles that lead to obtain pellets of different shapes and sizes. From the literature it is known that granulation leads to two forms of granules: isodiametric and nonisodiametric. The first group of particles forms has globular shape with a smooth surface and the proportion in which the length, thickness and height are about the same. They are usually made by fluidized bed granulation, spray drying, pelletizing and granulation in dragee pan. Granules of nonisodiametric form in which length is several times the width and height are made mostly by extrusion and compacting. The geometrical parameters of obtained granules are affected by the properties of raw materials, the granulation modes, type and amount of added humidifier and so on. The shape and size of granules, from a technological point of view, are the key factors that contribute, except organoleptic characteristics of the product, its technological properties such as particle size distribution, bulk volume, the ability of the material to shrinkage, porosity, fluidity, mechanical strength and so on. Properly selected for specific conditions granulation method is able to provide the finished product with the specified technological parameters depending on the needs. The aim of this work was to study the effect of granulation method and its conditions on the kinetics of growth of the natural zeolite granules and some quality characteristics of obtained granules. Material & methods. As objects of study served the natural zeolite pellets produced using 3%, 5%, 7% and 10% potato starch paste and solution of polyvinylpyrrolidone (PVP

  15. Application of acid-treated yeast cell wall (AYC) as a pharmaceutical additive. III. AYC aqueous coating onto granules and film formation mechanism of AYC.

    Science.gov (United States)

    Yuasa, Hiroshi; Kaneshige, Junichi; Ozeki, Tetsuya; Kasai, Takahide; Eguchi, Takahiro; Ishiwaki, Naomu

    2002-04-26

    From the viewpoint of effective utilization of natural resources and development of new pharmaceutical materials, acid-treated yeast cell wall (AYC) was prepared via a novel approach involving acidification of brewers' yeast cell wall. AYC aqueous dispersion containing 5% (w/v) AYC and 0.5% (w/v) glycerol was prepared. Subsequently, AYC was coated onto core granules containing acetaminophen (AAP). Spray mist size under various spray conditions and viscosity of the AYC aqueous dispersion at various AYC concentrations were measured. AYC spray mists were optically observed. The surface of AYC cast film and AYC-coated granules were observed with a confocal scanning laser microscope. We attempted to show the utility of AYC as a novel material for granule coating, following the tablet coating in our previous report. In addition, the film formation mechanism of AYC was investigated. A smooth surface of the AYC-coated granules was obtained at a coating ratio of only 5%, which generally requires approximately 15-30% coating against the core granule weight, with no aggregation. These results are attributable to the fact that the granules were coated with a large number of small mists of AYC and the coating progressed efficiently, and the thin film layer of AYC was formed on the granules by mutual tangling of the hydrogel layers of AYC polysaccharides. AAP release from AYC-coated granules was obviously rapid, suggesting the high utility of AYC as a coating material for the rapidly releasing granules.

  16. Clinic Effect of Layers Adjusting External Application Therapy on Knee Osteoarthritis%“易层”贴敷疗法治疗膝骨性关节炎的临床疗效观察

    Institute of Scientific and Technical Information of China (English)

    王培民; 黄国淳; 丁亮; 马勇

    2014-01-01

    This study was aimed to evaluate clinic effect of the layers adjusting external application therapy on knee osteoarthritis (OA). A total of 240 knee OA cases were randomly divided into the treatment group and the control group, with 120 cases in each group. The layers adjusting external application therapy was used in the treatment group. And analgesic plaster of compound of rhizoma arisaematis was used in the control group. The treatment was continued for 21 days. Then, 14-day follow-up was given after the treatment course. There were a total of 35 days. Observations were made on indexes of pain, swelling and joint dysfunction with quantitative scoring. The results showed that the total effective rate was 98.2%in the treatment group, and 83.9%in the control group. The indexes of pain, swelling and joint dysfunction were markedly improved in the treatment group as compared with the control group (P<0.01). It was concluded that the layers adjusting external application therapy was effective on the treat-ment of knee OA.%目的:观察评价“易层”贴敷疗法治疗膝骨性关节炎的临床疗效研究。方法:将240例患者随机分为治疗组和对照组,每组各120例。治疗组使用“易层”贴敷疗法治疗,对照组使用复方南星止痛膏治疗,治疗21天,治疗结束后再随访14天,共35天。观察两组疼痛、肿胀、关节功能障碍的改善情况,进行量化评分。结果:治疗组总有效率98.2%,对照组83.9%;治疗组在疼痛、肿胀及关节功能障碍的指标积分改善显著优于对照组(P<0.01)。结论:研究结果表明,“易层”贴敷疗法治疗膝骨性关节炎有良好的疗效。

  17. Impact of screw configuration on the particle size distribution of granules produced by twin screw granulation.

    Science.gov (United States)

    Vercruysse, J; Burggraeve, A; Fonteyne, M; Cappuyns, P; Delaet, U; Van Assche, I; De Beer, T; Remon, J P; Vervaet, C

    2015-02-01

    Twin screw granulation (TSG) has been reported by different research groups as an attractive technology for continuous wet granulation. However, in contrast to fluidized bed granulation, granules produced via this technique typically have a wide and multimodal particle size distribution (PSD), resulting in suboptimal flow properties. The aim of the current study was to evaluate the impact of granulator screw configuration on the PSD of granules produced by TSG. Experiments were performed using a 25 mm co-rotating twin screw granulator, being part of the ConsiGma™-25 system (a fully continuous from-powder-to-tablet manufacturing line from GEA Pharma Systems). Besides the screw elements conventionally used for TSG (conveying and kneading elements), alternative designs of screw elements (tooth-mixing-elements (TME), screw mixing elements (SME) and cutters) were investigated using an α-lactose monohydrate formulation granulated with distilled water. Granulation with only conveying elements resulted in wide and multimodal PSD. Using kneading elements, the width of the PSD could be partially narrowed and the liquid distribution was more homogeneous. However, still a significant fraction of oversized agglomerates was obtained. Implementing additional kneading elements or cutters in the final section of the screw configuration was not beneficial. Furthermore, granulation with only TME or SME had limited impact on the width of the PSD. Promising results were obtained by combining kneading elements with SME, as for these configurations the PSD was narrower and shifted to the size fractions suitable for tableting.

  18. Effect of Rashba spin-orbit coupling and external magnetic field on electronic minibands in highly strained one-layer quantum ring superlattice

    Science.gov (United States)

    Mughnetsyan, Vram; Manaselyan, Aram; Kirakosyan, Albert

    2017-04-01

    The Rashba spin-orbit coupling for electronic states in a strained one layer superlattice, composed of InAs/GaAs quantum rings has been investigated in the presence of uniform magnetic field directed perpendicular to the lattice plane. The dispersion surfaces and the energy dependencies on the magnetic field induction are obtained by the exact diagonalization procedure using the Fourier transformation to the momentum space. The characteristic splitting of the mini-bands as well as the crossings of the dispersion surfaces at the high symmetry points in the Brillouin zone have been observed. An upward shift of the minibands by about 60 meV due to strain in superlattice has been observed.

  19. Asymmetric distribution in twin screw granulation.

    Science.gov (United States)

    Chan Seem, Tim; Rowson, Neil A; Gabbott, Ian; de Matas, Marcel; Reynolds, Gavin K; Ingram, Andy

    2016-09-01

    Positron Emission Particle Tracking (PEPT) was successfully employed to validate measured transverse asymmetry in material distribution in the conveying zones of a Twin Screw Granulator (TSG). Flow asymmetry was established to be a property of the granulator geometry and dependent on fill level. The liquid distribution of granules as a function of fill level was determined. High flow asymmetry at low fill level negatively affects granule nucleation leading to high variance in final uniformity. Wetting of material during nucleation was identified as a critical parameter in determining final granule uniformity and fill level is highlighted as a crucial control factor in achieving this. Flow asymmetry of dry material in conveying zones upstream of binder fluid injection leads to poor non-uniform wetting at nucleation and results in heterogeneous final product. The granule formation mechanism of 60°F kneading blocks is suggested to be primarily breakage of agglomerates formed during nucleation. Optimisation of screw configuration would be required to provide secondary growth. This work shows how fill dependent flow regimes affect granulation mechanisms.

  20. Structural and physical effects of aroma compound binding to native starch granules

    DEFF Research Database (Denmark)

    Jørgensen, Anders Dysted; Jensen, Susanne L.; Ziegler, Gregory

    2012-01-01

    type. As deduced from DSC, powder XRD and SEM analyses, citral, butyric acid and octanol exerted specific effects on the starch granules manifested in local melting of crystalline layers and partial disruption of the granular meso structure. The most prominent effect was obtained with citral...

  1. Compressibility and compactibility of granules produced by wet and dry granulation.

    Science.gov (United States)

    Bacher, C; Olsen, P M; Bertelsen, P; Sonnergaard, J M

    2008-06-24

    The bulk properties, compactibility and compressibility of granules produced by wet and dry granulation were compared applying a rotary tablet press, three different morphological forms of calcium carbonate and two particle sizes of sorbitol. Granules from both granulation methods possessed acceptable flow properties; however, the ground (Mikhart) and cubic (Scoralite) calcium carbonate demonstrated better die-filling abilities in the tablet press than the scalenhedral calcium carbonate (Sturcal). The wet processed granules showed in general larger compression properties. This was explained as these granules were mechanical stronger and had a higher initial porosity. In some cases, a large particle surface area of calcium carbonate and sorbitol resulted in a small, insignificant improvement of the consolidation characteristics. A correlation between the compression and compaction characteristics was demonstrated.

  2. A TECHNICAL NOTE ON GRANULATION TECHNOLOGY: A WAY TO OPTIMISE GRANULES

    Directory of Open Access Journals (Sweden)

    Mahammed Athar A. Saikh

    2013-01-01

    Full Text Available To provide an updated technical note on granulation technology (GT, mostly on novel GT, that will help researcher working/engaged in designing an efficient GT for getting granules with desired features. Granules were most widely used in the production of pharmaceutical oral dosage forms. Advancement in GT had revolutionized the sphere and resulted in development of several processes. Each and every process had advantages and disadvantages, and limitations. Depth knowledge in GT was a prerequisite to process product for obtaining targeted granulation with desired product parameters. In this regards updated literatures were collected from data bases, studied and was presented for easy reference of scientists engaged in granule production, so that they can adopt appropriate and suitable GT. Presented handy note will help researchers in designing a robust GT for getting optimised granule.

  3. Distribution of binder in granules produced by means of twin screw granulation.

    Science.gov (United States)

    Fonteyne, Margot; Fussell, Andrew Luke; Vercruysse, Jurgen; Vervaet, Chris; Remon, Jean Paul; Strachan, Clare; Rades, Thomas; De Beer, Thomas

    2014-02-28

    According to the quality by design principle processes may not remain black-boxes and full process understanding is required. The granule size distribution of granules produced via twin screw granulation is often found to be bimodal. The aim of this study was to gain a better understanding of binder distribution within granules produced via twin screw granulation in order to investigate if an inhomogeneous spread of binder is causing this bimodal size distribution. Theophylline-lactose-polyvinylpyrrolidone K30 (PVP) (30-67.5-2.5%, w/w) was used as a model formulation. The intra-granular distribution of PVP was evaluated by means of hyperspectral coherent anti-Stokes Raman scattering (CARS) microscopy. For the evaluated formulation, no PVP rich zones were detected when applying a lateral spatial resolution of 0.5 μm, indicating that PVP is homogenously distributed within the granules.

  4. THE STUDY OF THE KINETIC OF NATURAL ZEOLITE GRANULES GROWTH AT DIFFERENT WAYS OF GRANULATION

    OpenAIRE

    Rybachuk VD

    2016-01-01

    Introduction. Active substances and excipients used in the manufacture of medicines in tablet form, in most cases, have poor technological properties. This fact determines the need for prior granulation of mass before compression. Granulators of various sizes and designs, running on different modes, made the formation, growth and consolidation of the powder particles that lead to obtain pellets of different shapes and sizes. From the literature it is known that granulation leads to two forms ...

  5. Supervised Learning of Two-Layer Perceptron under the Existence of External Noise — Learning Curve of Boolean Functions of Two Variables in Tree-Like Architecture —

    Science.gov (United States)

    Uezu, Tatsuya; Kiyokawa, Shuji

    2016-06-01

    We investigate the supervised batch learning of Boolean functions expressed by a two-layer perceptron with a tree-like structure. We adopt continuous weights (spherical model) and the Gibbs algorithm. We study the Parity and And machines and two types of noise, input and output noise, together with the noiseless case. We assume that only the teacher suffers from noise. By using the replica method, we derive the saddle point equations for order parameters under the replica symmetric (RS) ansatz. We study the critical value αC of the loading rate α above which the learning phase exists for cases with and without noise. We find that αC is nonzero for the Parity machine, while it is zero for the And machine. We derive the exponents barβ of order parameters expressed as (α - α C)bar{β} when α is near to αC. Furthermore, in the Parity machine, when noise exists, we find a spin glass solution, in which the overlap between the teacher and student vectors is zero but that between student vectors is nonzero. We perform Markov chain Monte Carlo simulations by simulated annealing and also by exchange Monte Carlo simulations in both machines. In the Parity machine, we study the de Almeida-Thouless stability, and by comparing theoretical and numerical results, we find that there exist parameter regions where the RS solution is unstable, and that the spin glass solution is metastable or unstable. We also study asymptotic learning behavior for large α and derive the exponents hat{β } of order parameters expressed as α - hat{β } when α is large in both machines. By simulated annealing simulations, we confirm these results and conclude that learning takes place for the input noise case with any noise amplitude and for the output noise case when the probability that the teacher's output is reversed is less than one-half.

  6. Dynamic compensation temperature in the kinetic spin-1 Ising model in an oscillating external magnetic field on alternate layers of a hexagonal lattice

    Science.gov (United States)

    Temizer, Ümüt; Keskin, Mustafa; Canko, Osman

    2009-10-01

    The dynamic behavior of a two-sublattice spin-1 Ising model with a crystal-field interaction ( D) in the presence of a time-varying magnetic field on a hexagonal lattice is studied by using the Glauber-type stochastic dynamics. The lattice is formed by alternate layers of spins σ=1 and S=1. For this spin arrangement, any spin at one lattice site has two nearest-neighbor spins on the same sublattice, and four on the other sublattice. The intersublattice interaction is antiferromagnetic. We employ the Glauber transition rates to construct the mean-field dynamical equations. Firstly, we study time variations of the average magnetizations in order to find the phases in the system, and the temperature dependence of the average magnetizations in a period, which is also called the dynamic magnetizations, to obtain the dynamic phase transition (DPT) points as well as to characterize the nature (continuous and discontinuous) of transitions. Then, the behavior of the total dynamic magnetization as a function of the temperature is investigated to find the types of the compensation behavior. Dynamic phase diagrams are calculated for both DPT points and dynamic compensation effect. Phase diagrams contain the paramagnetic (p) and antiferromagnetic (af) phases, the p+af and nm+p mixed phases, nm is the non-magnetic phase, and the compensation temperature or the L-type behavior that strongly depend on the interaction parameters. For D3.8275, H0 is the magnetic field amplitude, the compensation effect does not appear in the system.

  7. Cohesive strength of iron ore granules

    Directory of Open Access Journals (Sweden)

    Contreras Rafael Jaimes

    2017-01-01

    Full Text Available We present an experimental and numerical investigation of the mechanical strength of crude iron ore (Hematite granules in which capillary bonds between primary particles are the source of internal cohesion. The strength is measured by subjecting the granules to vertical compression between two plates. We show that the behavior of the granules is ductile with a well-defined plastic threshold which increases with the amount of water. It is found that the compressive strength scales with capillary cohesion with a pre-factor that is nearly independent of size polydispersity for the investigated range of parameters but increases with friction coefficient between primary particles. This weak dependence may be attributed to the class of fine particles which, due to their large number, behaves as a cohesive matrix that controls the strength of the granule.

  8. Cohesive strength of iron ore granules

    Science.gov (United States)

    Contreras, Rafael Jaimes; Berger, Nicolas; Izard, Edouard; Douce, Jean-François; Koltsov, Alexey; Delenne, Jean-Yves; Azema, Emilien; Nezamabadi, Saeid; van Loo, Frédéric; Pellenq, Roland; Radjai, Farhang

    2017-06-01

    We present an experimental and numerical investigation of the mechanical strength of crude iron ore (Hematite) granules in which capillary bonds between primary particles are the source of internal cohesion. The strength is measured by subjecting the granules to vertical compression between two plates. We show that the behavior of the granules is ductile with a well-defined plastic threshold which increases with the amount of water. It is found that the compressive strength scales with capillary cohesion with a pre-factor that is nearly independent of size polydispersity for the investigated range of parameters but increases with friction coefficient between primary particles. This weak dependence may be attributed to the class of fine particles which, due to their large number, behaves as a cohesive matrix that controls the strength of the granule.

  9. Atrial natriuretic peptide (ANP)-granules: ultrastructure ...

    African Journals Online (AJOL)

    AJB SERVER

    2006-12-29

    Dec 29, 2006 ... physiological conditions: temperature, dehydration and nutritional condition. The main ... Granule content is released into the extra-cellular space (extrusion). The ANP causes .... Studies carried out in humans (Tanaka et al.,.

  10. Measuring stellar granulation during planet transits

    CERN Document Server

    Chiavassa, A; Selsis, F; Leconte, J; Von Paris, P; Bordé, P; Magic, Z; Collet, R; Asplund, M

    2016-01-01

    Stellar activity and convection-related surface structures might cause bias in planet detection and characterization that use these transits. Surface convection simulations help to quantify the granulation signal. We used realistic three-dimensional radiative hydrodynamical simulations from the Stagger grid and synthetic images computed with the radiative transfer code Optim3D to model the transits of three prototype planets: a hot Jupiter, a hot Neptune, and a terrestrial planet. We computed intensity maps from RHD simulations of the Sun and a K-dwarf star at different wavelength bands from optical to far-infrared. We modeled the transit using synthetic stellar-disk images and emulated the temporal variation of the granulation intensity. We identified two types of granulation noise that act simultaneously during the planet transit: (i) the intrinsic change in the granulation pattern with timescales smaller than the usual planet transit, and (ii) the fact that the transiting planet occults isolated regions of...

  11. Acid resistance of starch granules

    Energy Technology Data Exchange (ETDEWEB)

    Nara, S.; Sakakura, M.; Komiya, T.

    1983-08-01

    When potato starch was hydrolyzed to form Naegeli amylodextrin by 16% sulfuric acid at 30/sup 0/C, only the amorphous portion of the starch granules was deteriorated. The crystallinity of Naegeli amylodextrin showing the hydrolysis ratio of 0.22 was 1.28 times as large as that of original starch. The hydrolysis process at above 45/sup 0/C was given by two exponential equations. The value of acid resistance portion (C/sub 0/) at 30 and 38/sup 0/C was 100%, while the values at 45, 50 and 55/sup 0/C were 67, 38 and 18%, respectively. The high value of C/sub 0/ generally showed the high acid resistance in the various starches. Sweet potato and waxy rice starches were more easily hydrolysed than other starches, although they gave the relatively high value of C/sub 0/. Thus, it was slightly more difficult for low acid resistance portion of potato starch to be hydrolyzed than for that of other starches. Moreover, that of waxy rice was easily hydrolyzed.

  12. Hippocampal granule cells opt for early retirement.

    Science.gov (United States)

    Alme, C B; Buzzetti, R A; Marrone, D F; Leutgeb, J K; Chawla, M K; Schaner, M J; Bohanick, J D; Khoboko, T; Leutgeb, S; Moser, E I; Moser, M-B; McNaughton, B L; Barnes, C A

    2010-10-01

    Increased excitability and plasticity of adult-generated hippocampal granule cells during a critical period suggests that they may "orthogonalize" memories according to time. One version of this "temporal tag" hypothesis suggests that young granule cells are particularly responsive during a specific time period after their genesis, allowing them to play a significant role in sculpting CA3 representations, after which they become much less responsive to any input. An alternative possibility is that the granule cells active during their window of increased plasticity, and excitability become selectively tuned to events that occurred during that time and participate in later reinstatement of those experiences, to the exclusion of other cells. To discriminate between these possibilities, rats were exposed to different environments at different times over many weeks, and cell activation was subsequently assessed during a single session in which all environments were revisited. Dispersing the initial experiences in time did not lead to the increase in total recruitment at reinstatement time predicted by the selective tuning hypothesis. The data indicate that, during a given time frame, only a very small number of granule cells participate in many experiences, with most not participating significantly in any. Based on these and previous data, the small excitable population of granule cells probably correspond to the most recently generated cells. It appears that, rather than contributing to the recollection of long past events, most granule cells, possibly 90-95%, are effectively "retired." If granule cells indeed sculpt CA3 representations (which remains to be shown), then a possible consequence of having a new set of granule cells participate when old memories are reinstated is that new representations of these experiences might be generated in CA3. Whatever the case, the present data may be interpreted to undermine the standard "orthogonalizer" theory of the role of

  13. Roles of EDTA washing and Ca{sup 2+} regulation on the restoration of anammox granules inhibited by copper(II)

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zheng-Zhe; Cheng, Ya-Fei; Zhou, Yu-Huang; Buayi, Xiemuguli [Department of Environmental Science and Engineering, Hangzhou Normal University, Hangzhou 310036 (China); Key Laboratory of Hangzhou City for Ecosystem Protection and Restoration, Hangzhou Normal University, Hangzhou 310036 (China); Jin, Ren-Cun, E-mail: jrczju@aliyun.com [Department of Environmental Science and Engineering, Hangzhou Normal University, Hangzhou 310036 (China); Key Laboratory of Hangzhou City for Ecosystem Protection and Restoration, Hangzhou Normal University, Hangzhou 310036 (China)

    2016-01-15

    Highlights: • 80.5% of the Cu in anammox granules was introduced via adsorption. • Cu(II) internalized on/into AnAOB cells plays a crucial role in toxicity. • EDTA washing contributes to the detoxification of anammox granules. • Ca{sup 2+} can stimulate the re-growth of damaged anammox consortium. - Abstract: We investigated the feasibility of using ethylene diamine tetraacetic acid (EDTA) washing followed by Ca{sup 2+} enhancement for the recovery of anammox reactors inhibited by Cu(II). Kinetic experiments and batch activity assays were employed to determine the optimal concentration of EDTA and washing time; and the performance and physiological dynamics were tracked by continuous-flow monitoring to evaluate the long-term effects. The two-step desorption process revealed that the Cu in anammox granules was primarily introduced via adsorption (approximately, 80.5%), and the portion of Cu in the dispersible layer was predominant (accounting for 71.1%). Afterwards, the Cu internalized in the cells (approximately, 14.7%) could diffuse out of the cells and be gradually washed out of the reactor over the next 20 days. The Ca{sup 2+} addition that followed led to an accelerated nitrogen removal rate recovery slope (0.1491 kgN m{sup −3} d{sup −2}) and a normal biomass growth rate (0.054 d{sup −1}). The nitrogen removal rate returned to normal levels within 90 days and gradual improvements in granular characteristics were also achieved. Therefore, this study provides a new insight that externally removing the adsorbed heavy metals followed by internally repairing the metabolic system may represent an optimal restoration strategy for anammox consortium damaged by heavy metals.

  14. Application of simple dynamic recurrent neural networks in solid granule flowrate modeling

    Science.gov (United States)

    Du, Yun; Sun, Huiqin; Tian, Qiang; Ren, Haiping; Zhang, Suying

    2008-10-01

    To build the solid granule flowrate model by the simple dynamic recurrent neural network (SRNN) is presented in this paper. Because of the dynamic recurrent neural network has the characteristic of intricate network structure and slow training algorithm rate, the simple recurrent neural network without the weight values on recursion layer is studied. The recurrent prediction error (RPE) learning algorithm for SRNN by adjustment the weight value and the threshold value is reduced. The modeling result of solid granule flowrate indicates that it has fast convergence rate and the high precision the model. It can be used on real time.

  15. Intracranial localization of arachnoid granulations in rats

    Institute of Scientific and Technical Information of China (English)

    Yanan Dong; Min Yu; Lei Meng; Yong Jiang; Jun Gao; Honghai Peng; Jianguo Shi

    2008-01-01

    BACKGROUND: This paper describes histomorphologic studies on arachnoid granulations in rats, which have not been investigated in China to our knowledge.OBJECTIVE: To observe the distribution of intracranial arachnoid granulations in rats. DESIGN, TIME AND SETTING: The observational experiment was performed in the Academy of Life Sciences of Shandong Taishan Medical College from May to August 2004.MATERIALS: Thirty healthy adult Wistar rats (3-4 months old) of SPF grade, equal numbers of each sex, were selected for this study. Methylene blue parenteral solution was provided by Jiangsu Jichuan Pharmaceutical Company (China), and an optical microscope (Type: CH20; Olympus Co. Ltd., Japan) was used for observation of the histomorphology of the arachnoid granulations.METHOD: Injection of methylene blue parenteral solution into the cerebellomedullary cistern of rats.MAIN OUTCOME MEASURE: The blue stained parts of the lateral sinus were sectioned, stained by hematoxylin and eosin, and then observed under the microscope.RESULTS: The cavitas subarachnoidealis had extensive blue staining after methylene blue injection, while the arachnoid and dura were without dye accumulation. The blue dye indicated the location of the arachnoid granulations. The location of these granulations was fixed, mainly in the lateral sinus at both sides of confluence within 4 mm of the internal jugular vein.CONCLUSION: The arachnoid granulations of the rat were located mainly in the lateral sinuses of the dura mater.

  16. Non-contact AFM investigation of influence of freezing process on the surface structure of potato starch granule

    Science.gov (United States)

    Krok, F.; Szymońska, J.; Tomasik, P.; Szymoński, M.

    2000-04-01

    To assess the influence of the freezing process on the surface structure of a potato starch granule, a non-contact Atomic Force Microscopy (NC-AFM) investigation at ambient conditions has been undertaken. The observations were carried out for dried (oven-dried) and native (air-dried) starch. The obtained AFM images of the native starch granule surface demonstrated it as not uniformly smooth and having rough undulating appearance with layers of adsorbed water which could be removed by oven drying in 130°C. After freezing, the dried starch granule surface still consisted of nodules of about 100 nm in diameter. Significant changes in the granule surface appearance can be seen for dried starch samples frozen with some excess of water as well as for native starch samples frozen with its original water. Then the aggregation and polishing of the granules was observed and their surface revealed a microstructure with distinct ring-like protrusions of about 300 nm in diameter. Our observations tally with the amylopectine "blocket" starch granule structure model proposed in the literature and allowed to conclude that freezing may be a useful tool, among other methods, for modifying starch granule properties.

  17. Mechanism of phenol adsorption onto electro-activated carbon granules.

    Science.gov (United States)

    Lounici, H; Aioueche, F; Belhocine, D; Drouiche, M; Pauss, A; Mameri, N

    2004-01-01

    The main purpose of this paper is to determine the mechanisms which govern the adsorption of the phenol onto electro-activated carbon granules. This new activation technique allowed an increase of the performance of the adsorbent. Two models were utilised to understand the improvement in the performance of electroactivated carbon granules. The first, a simple external resistance model based on film resistance, gave acceptable predictions, with an error of less than 15%, between the theoretical results and experimental data independent of the activation potential and phenol initial concentration. The second linear model, based on diffusion phenomena, was more representative in describing the experiment than the first model. It was observed that the electro-activation method did not change the mechanism which governs phenol adsorption onto granular carbon. Indeed, the same mathematical model based on diffusion phenomena made it possible to predict with a very low error (less than 5%) the experimental data obtained for the favourable activation potential, without activation potential and with an unfavourable activation potential. The electro-activation technique makes it possible to increase the number of active sites that improve the performance of the electro-activated granular carbon compared with conventional granular activated carbon.

  18. Study of light scattering by a granulated coated sphere - a model of granulated blood cells

    NARCIS (Netherlands)

    M.A. Yurkin; D. de Kanter; A.G. Hoekstra

    2008-01-01

    We performed extensive simulations of light scattering by granulated coated sphere model using the discrete dipole approximation and varying model parameters in the ranges of sizes and refractive indices of granulated blood cells. We compared these results with predictions of Maxwell-Garnett effecti

  19. Granule size control and targeting in pulsed spray fluid bed granulation.

    Science.gov (United States)

    Ehlers, Henrik; Liu, Anchang; Räikkönen, Heikki; Hatara, Juha; Antikainen, Osmo; Airaksinen, Sari; Heinämäki, Jyrki; Lou, Honxiang; Yliruusi, Jouko

    2009-07-30

    The primary aim of the study was to investigate the effects of pulsed liquid feed on granule size. The secondary aim was to increase knowledge of this technique in granule size targeting. Pulsed liquid feed refers to the pump changing between on- and off-positions in sequences, called duty cycles. One duty cycle consists of one on- and off-period. The study was performed with a laboratory-scale top-spray fluid bed granulator with duty cycle length and atomization pressure as studied variables. The liquid feed rate, amount and inlet air temperature were constant. The granules were small, indicating that the powder has only undergone ordered mixing, nucleation and early growth. The effect of atomizing pressure on granule size depends on inlet air relative humidity, with premature binder evaporation as a reason. The duty cycle length was of critical importance to the end product attributes, by defining the extent of intermittent drying and rewetting. By varying only the duty cycle length, it was possible to control granule nucleation and growth, with a wider granule size target range in increased relative humidity. The present study confirms that pulsed liquid feed in fluid bed granulation is a useful tool in end product particle size targeting.

  20. Investigation of Physicochemical Drug Properties to Prepare Fine Globular Granules Composed of Only Drug Substance in Fluidized Bed Rotor Granulation.

    Science.gov (United States)

    Mise, Ryohei; Iwao, Yasunori; Kimura, Shin-Ichiro; Osugi, Yukiko; Noguchi, Shuji; Itai, Shigeru

    2015-01-01

    The effect of some drug properties (wettability and particle size distribution) on granule properties (mean particle size, particle size distribution, sphericity, and granule strength) were investigated in a high (>97%) drug-loading formulation using fluidized bed rotor granulation. Three drugs: acetaminophen (APAP); ibuprofen (IBU); and ethenzamide (ETZ) were used as model drugs based on their differences in wettability and particle size distribution. Granules with mean particle sizes of 100-200 µm and a narrow particle size distribution (PSD) could be prepared regardless of the drug used. IBU and ETZ granules showed a higher sphericity than APAP granules, while APAP and ETZ granules exhibited higher granule strength than IBU. The relationship between drug and granule properties suggested that the wettability and the PSD of the drugs were critical parameters affecting sphericity and granule strength, respectively. Furthermore, the dissolution profiles of granules prepared with poorly water-soluble drugs (IBU and ETZ) showed a rapid release (80% release in 20 min) because of the improved wettability with granulation. The present study demonstrated for the first time that fluidized bed rotor granulation can prepare high drug-loaded (>97%) globular granules with a mean particle size of less than 200 µm and the relationship between physicochemical drug properties and the properties of the granules obtained could be readily determined, indicating the potential for further application of this methodology to various drugs.

  1. Eosinophil secretion of granule-derived cytokines

    Directory of Open Access Journals (Sweden)

    Lisa A Spencer

    2014-10-01

    Full Text Available Eosinophils are tissue-dwelling leukocytes, present in the thymus, and gastrointestinal and genitourinary tracts of healthy individuals at baseline, and recruited, often in large numbers, to allergic inflammatory foci and sites of active tissue repair. The biological significance of eosinophils is vast and varied. In health, eosinophils support uterine and mammary gland development, and maintain bone marrow plasma cells and adipose tissue alternatively activated macrophages, while in response to tissue insult eosinophils function as inflammatory effector cells, and, in the wake of an inflammatory response, promote tissue regeneration and wound healing. One common mechanism driving many of the diverse eosinophil functions is the regulated and differential secretion of a vast array of eosinophil-derived cytokines. Eosinophils are distinguished from most other leukocytes in that many, if not all, of the over three dozen eosinophil-derived cytokines are pre-synthesized and stored within intracellular granules, poised for very rapid, stimulus-induced secretion. Eosinophils engaged in cytokine secretion in situ utilize distinct pathways of cytokine release that include: classical exocytosis, whereby granules themselves fuse with the plasma membrane and release their entire contents extracellularly; piecemeal degranulation, whereby granule-derived cytokines are selectively mobilized into vesicles that emerge from granules, traverse the cytoplasm and fuse with the plasma membrane to release discrete packets of cytokines; and eosinophil cytolysis, whereby intact granules are extruded from eosinophils, and deposited within tissues. In this latter scenario, extracellular granules can themselves function as stimulus-responsive secretory-competent organelles within the tissue. Here we review the distinctive processes of differential secretion of eosinophil granule-derived cytokines.

  2. A comparison of solute migration in a test granulation dried by fluidization and other methods.

    Science.gov (United States)

    Travers, D N

    1975-07-01

    The intragranular migration of sodium chloride in granules made by the wet massing of heavy kaolin B.P. with salt solution has been studied in batches dried by fluidization and a vacuum tumbling method. The larger granules from the fluidized batch exhibited considerable intragranular variation with the outer crust containing over twice the average salt concentration. Solute loss from this layer by abrasion on prolonged fluidization was slight but the dust eluted from the dryer had a salt content above average. Analysis of sieved fractions of the dust showed that this enrichment was concentrated in the fine material passing a 53 mum mesh. The vacuum dried granules had less migration and were less resistant to crushing than those dried by fluidization. The dust produced had a salt content only slightly greater than the average composition and the overall solute content of the sized fractions were all close to this average. The same system was used to study intergranular migration in a fixed bed when the granules were dried by infrared radiation, by microwave radiation, by convection from air and in a vacuum. The greatest migration occurred in samples dried by infrared radiation and the maximum solute concentration was near the middle of the bed. The air dried granules had less migration and the maximum concentration was in the surface layer. The granules dried in a vacuum and by microwave radiation were fairly uniform in composition throughout the bed. The above results are explained on the basis of the capillary theory of drying together with the modifying influence of the drying method on the probable heat and mass transfer rates.

  3. Identification of miRNAs differentially expressed in human epilepsy with or without granule cell pathology.

    Directory of Open Access Journals (Sweden)

    Silvia Zucchini

    Full Text Available The microRNAs (miRNAs are small size non-coding RNAs that regulate expression of target mRNAs at post-transcriptional level. miRNAs differentially expressed under pathological conditions may help identifying mechanisms underlying the disease and may represent biomarkers with prognostic value. However, this kind of studies are difficult in the brain because of the cellular heterogeneity of the tissue and of the limited access to fresh tissue. Here, we focused on a pathology affecting specific cells in a subpopulation of epileptic brains (hippocampal granule cells, an approach that bypasses the above problems. All patients underwent surgery for intractable temporal lobe epilepsy and had hippocampal sclerosis associated with no granule cell pathology in half of the cases and with type-2 granule cell pathology (granule cell layer dispersion or bilamination in the other half. The expression of more than 1000 miRNAs was examined in the laser-microdissected dentate granule cell layer. Twelve miRNAs were differentially expressed in the two groups. One of these, miR487a, was confirmed to be expressed at highly differential levels in an extended cohort of patients, using RT-qPCR. Bioinformatics searches and RT-qPCR verification identified ANTXR1 as a possible target of miR487a. ANTXR1 may be directly implicated in granule cell dispersion because it is an adhesion molecule that favors cell spreading. Thus, miR487a could be the first identified element of a miRNA signature that may be useful for prognostic evaluation of post-surgical epilepsy and may drive mechanistic studies leading to the identification of therapeutic targets.

  4. Preparation and in vitro evaluation of guar gum based triple-layer matrix tablet of diclofenac sodium

    OpenAIRE

    Chavda, H. V.; M. S. Patel; Patel, C N

    2012-01-01

    The objective of the present study was to design an oral controlled drug delivery system for sparingly soluble diclofenac sodium (DCL) using guar gum as triple-layer matrix tablets. Matrix tablet granules containing 30% (D1), 40% (D2) or 50% (D3) of guar gum were prepared by the conventional wet granulation technique. Matrix tablets of diclofenac sodium were prepared by compressing three layers one by one. Centre layer of sandwich like structure was incorporated with matrix granules containin...

  5. Aerobic granulation of protein-rich granules from nitrogen-lean wastewaters.

    Science.gov (United States)

    Chen, Yu-You; Ju, Sheau-Pyng; Lee, Duu-Jong

    2016-10-01

    Proteins (PN)-rich granules are stable in structure in long-term reactor operations. This study proposed to cultivate PN-rich granules with PN/polysaccharides (PS) >20 from nitrogen lean wastewater, with ammonia-nitrogen as sole nitrogen source at chemical oxygen demand (COD)/N of 153.8. The yielded granules can sustain their structural stability in sequencing batch reactor mode for sufficient treatment of wastewaters up to 7000mg/L COD and with COD/Nnitrogen fed in the nitrogen-lean wastewater is converted to the PN in the granules. The replacement of ammonia by nitrate as sole nitrogen source led to granules enriched with γ-proteobacteria which are easily deteriorated at low OLR.

  6. Zinc iodide-osmium staining of membrane-coating granules in keratinized and non-keratinized mammalian oral epithelium.

    Science.gov (United States)

    Squier, C A

    1982-01-01

    Specimens of keratinized and non-keratinized oral epithelium were examined in the electron microscope after being stained with zinc iodide-osmium. In both types of tissue, reaction was seen in unmyelinated nerves, in the specific granules of epithelial Langerhans cells and within lysosome-like organelles and small vesicles associated with Golgi systems. In keratinized epithelia, the reaction was also present in the membrane-coating granules and between the deepest cells of the keratinized layer. In contrast, the membrane-coating granules of non-keratinized epithelia lacked Zn iodide-osmium staining despite the presence of reaction in adjacent Golgi systems. It is suggested that Zn iodide-osmium stains glycolipid or glycoprotein material in the cell. This material is elaborated in the Golgi systems from which lysosomes and the membrane-coating granules of keratinized tissues are probably derived.

  7. Formation of volutin granules in Corynebacterium glutamicum.

    Science.gov (United States)

    Pallerla, Srinivas Reddy; Knebel, Sandra; Polen, Tino; Klauth, Peter; Hollender, Juliane; Wendisch, Volker F; Schoberth, Siegfried M

    2005-02-01

    Volutin granules are intracellular storages of complexed inorganic polyphosphate (poly P). Histochemical staining procedures differentiate between pathogenic corynebacteria such as Corynebacterum diphtheriae (containing volutin) and non-pathogenic species, such as C. glutamicum. Here we report that strains ATCC13032 and MH20-22B of the non-pathogenic C. glutamicum also formed subcellular entities (18-37% of the total cell volume) that had the typical characteristics of volutin granules: (i) volutin staining, (ii) green UV fluorescence when stained with 4',6-diamidino-2-phenylindole, (iii) electron-dense and rich in phosphorus when determined with transmission electron microscopy and X-ray microanalysis, and (iv) 31P NMR poly P resonances of isolated granules dissolved in EDTA. MgCl2 addition to the growth medium stimulated granule formation but did not effect expression of genes involved in poly P metabolism. Granular volutin fractions from lysed cells contained polyphosphate glucokinase as detected by SDS-PAGE/MALDI-TOF, indicating that this poly P metabolizing enzyme is present also in intact poly P granules. The results suggest that formation of volutin is a more widespread phenomenon than generally accepted.

  8. Measuring stellar granulation during planet transits

    Science.gov (United States)

    Chiavassa, A.; Caldas, A.; Selsis, F.; Leconte, J.; Von Paris, P.; Bordé, P.; Magic, Z.; Collet, R.; Asplund, M.

    2017-01-01

    Context. Stellar activity and convection-related surface structures might cause bias in planet detection and characterization that use these transits. Surface convection simulations help to quantify the granulation signal. Aims: We used realistic three-dimensional (3D) radiative hydrodynamical (RHD) simulations from the Stagger grid and synthetic images computed with the radiative transfer code Optim3D to model the transits of three prototype planets: a hot Jupiter, a hot Neptune, and a terrestrial planet. Methods: We computed intensity maps from RHD simulations of the Sun and a K-dwarf star at different wavelength bands from optical to far-infrared that cover the range of several ground- and space-based telescopes which observe exoplanet transits. We modeled the transit using synthetic stellar-disk images obtained with a spherical-tile imaging method and emulated the temporal variation of the granulation intensity generating random images covering a granulation time-series of 13.3 h. We measured the contribution of the stellar granulation on the light curves during the planet transit. Results: We identified two types of granulation noise that act simultaneously during the planet transit: (i) the intrinsic change in the granulation pattern with timescale (e.g., 10 min for solar-type stars assumed in this work) is smaller than the usual planet transit ( hours as in our prototype cases); and (ii) the fact that the transiting planet occults isolated regions of the photosphere that differ in local surface brightness as a result of convective-related surface structures. First, we showed that our modeling approach returns granulation timescale fluctuations that are comparable with what has been observed for the Sun. Then, our statistical approach shows that the granulation pattern of solar and K-dwarf-type stars have a non-negligible effect of the light curve depth during the transit, and, consequentially on the determination of the planet transit parameters such as the

  9. MEMBRANE-COATING GRANULES OF KERATINIZING EPITHELIA.

    Science.gov (United States)

    MATOLTSY, A G; PARAKKAL, P F

    1965-02-01

    The purpose of this study has been to obtain information on the development of the envelop of horny cells that resists the action of keratinolytic agents. Toward this end the epidermis, oral mucosa, and tongue epithelium of various vertebrates, as well as the isolated envelopes of horny cells, were examined by electron microscopy. It was found that small cytoplasmic granules (1,000 to 5,000 A) that develop within differentiating epithelial cells move toward the cell periphery, and after fusion with the plasma membrane, empty their contents into the intercellular spaces. The content of the granules spreads over the cell surfaces, and subsequently a thickened and coated cell envelope is formed that resists the action of keratinolytic agent. The membrane-coating granule is regarded as a specific differentiation product of the keratinizing epithelium. It contains numerous inner membranes and is assumed to engage in synthetic activities such as, perhaps, the formation of polysaccharides.

  10. Morphological changes among hippocampal dentate granule cells exposed to early kindling-epileptogenesis.

    Science.gov (United States)

    Singh, Shatrunjai P; He, Xiaoping; McNamara, James O; Danzer, Steve C

    2013-12-01

    Temporal lobe epilepsy is associated with changes in the morphology of hippocampal dentate granule cells. These changes are evident in numerous models that are associated with substantial neuron loss and spontaneous recurrent seizures. By contrast, previous studies have shown that in the kindling model, it is possible to administer a limited number of stimulations sufficient to produce a lifelong enhanced sensitivity to stimulus evoked seizures without associated spontaneous seizures and minimal neuronal loss. Here we examined whether stimulation of the amygdala sufficient to evoke five convulsive seizures (class IV or greater on Racine's scale) produce morphological changes similar to those observed in models of epilepsy associated with substantial cell loss. The morphology of GFP-expressing granule cells from Thy-1 GFP mice was examined either 1 day or 1 month after the last evoked seizure. Interestingly, significant reductions in dendritic spine density were evident 1 day after the last seizure, the magnitude of which had diminished by 1 month. Further, there was an increase in the thickness of the granule cell layer 1 day after the last evoked seizure, which was absent a month later. We also observed an increase in the area of the proximal axon, which again returned to control levels a month later. No differences in the number of basal dendrites were detected at either time point. These findings demonstrate that the early stages of kindling epileptogenesis produce transient changes in the granule cell body layer thickness, molecular layer spine density, and axon proximal area, but do not produce striking rearrangements of granule cell structure.

  11. Enhancement of sludge granulation in hydrolytic acidogenesis by denitrification.

    Science.gov (United States)

    Li, Yang; Zhang, Yaobin; Zhao, Zisheng; Sun, Songlan; Quan, Xie; Zhao, Huimin

    2016-04-01

    Acidogenesis is an important pretreatment process for various industrial wastewater treatments. Granular sludge is an efficient form of a microbial community in anaerobic methanogenic reactors, such as upflow anaerobic sludge blanket (UASB), but it is hard to develop in the acidogenic process due to the short hydraulic retention times (HRTs) of acidogenesis. In this study, nitrate was added into an acidogenic reactor as an electron acceptor to enhance electron exchange between acidogenic and denitrifying bacteria to accelerate sludge growth in the acidogenesis process. The results showed that it developed solid and mature granular sludge with a mean size of 410 ± 35 μm over 84 days of operation. Comparatively, the sludge in a no-nitrate acidogenic reactor showed a flocculent appearance with a mean size of 110 ± 18 μm. Analysis of the microbial community indicated that denitrifying bacteria interwoven with propionate-oxidizing bacteria were distributed in the outer granule layer, which provided an ideal shield for susceptible microorganisms inside the granules. This microbial structure was favorable for the development of granular sludge and made the system possible to respond well to shocks in the operation.

  12. External Otitis (Swimmer's Ear)

    Science.gov (United States)

    ... to Pneumococcal Vaccine Additional Content Medical News External Otitis (Swimmer's Ear) By Bradley W. Kesser, MD, Associate ... the Outer Ear Ear Blockages Ear Tumors External Otitis (Swimmer's Ear) Malignant External Otitis Perichondritis External otitis ...

  13. Use of a continuous twin screw granulation and drying system during formulation development and process optimization.

    Science.gov (United States)

    Vercruysse, J; Peeters, E; Fonteyne, M; Cappuyns, P; Delaet, U; Van Assche, I; De Beer, T; Remon, J P; Vervaet, C

    2015-01-01

    Since small scale is key for successful introduction of continuous techniques in the pharmaceutical industry to allow its use during formulation development and process optimization, it is essential to determine whether the product quality is similar when small quantities of materials are processed compared to the continuous processing of larger quantities. Therefore, the aim of this study was to investigate whether material processed in a single cell of the six-segmented fluid bed dryer of the ConsiGma™-25 system (a continuous twin screw granulation and drying system introduced by GEA Pharma Systems, Collette™, Wommelgem, Belgium) is predictive of granule and tablet quality during full-scale manufacturing when all drying cells are filled. Furthermore, the performance of the ConsiGma™-1 system (a mobile laboratory unit) was evaluated and compared to the ConsiGma™-25 system. A premix of two active ingredients, powdered cellulose, maize starch, pregelatinized starch and sodium starch glycolate was granulated with distilled water. After drying and milling (1000 μm, 800 rpm), granules were blended with magnesium stearate and compressed using a Modul™ P tablet press (tablet weight: 430 mg, main compression force: 12 kN). Single cell experiments using the ConsiGma™-25 system and ConsiGma™-1 system were performed in triplicate. Additionally, a 1h continuous run using the ConsiGma™-25 system was executed. Process outcomes (torque, barrel wall temperature, product temperature during drying) and granule (residual moisture content, particle size distribution, bulk and tapped density, hausner ratio, friability) as well as tablet (hardness, friability, disintegration time and dissolution) quality attributes were evaluated. By performing a 1h continuous run, it was detected that a stabilization period was needed for torque and barrel wall temperature due to initial layering of the screws and the screw chamber walls with material. Consequently, slightly deviating

  14. On the New Technology of Using Perlite for Insulation Layer of External Wall%谈外墙保温层利用珍珠岩的新工艺

    Institute of Scientific and Technical Information of China (English)

    曾笳

    2013-01-01

      建筑行业中资源消耗减量化、污染排放量最小化、废物再生资源化和无害化是今后发展的必然趋势。文章介绍了外墙保温技术的优点,探讨利用珍珠岩作为外墙保温层的新工艺的施工流程和施工要点,为该行业提供参考。%Resource consumption reduction, pollution emissions minimization, material regeneration and harmless, all of them in the construction industry are a certain trend in the future. The paper introduces the advantages of thermal insulation tech-nology in exterior wall, explores construction process and construction points of the new technology that use the perlite as the thermal insulation layer of external wall, providing some references for the field.

  15. Arachnoid granulation affected by subarachnoid hemorrhage

    Directory of Open Access Journals (Sweden)

    R.P. Chopard

    1993-11-01

    Full Text Available The purpose of this study was to investigate using light microscopy the fibro-cellular components of arachnoid granulations affected by mild and severe subarachnoid hemorrage. The erythrocytes were in the channels delimitated by collagenous and elastic bundles and arachnoid cells, showing their tortuous and intercommunicating row from the pedicle to the fibrous capsule. The core portion of the pedicle and the center represented a principal route to the bulk outflow of cerebrospinal fluid and erythrocytes. In the severe hemorrhage, the fibrocellular components are desorganized, increasing the extracellular channels. We could see arachnoid granulations without erythrocytes, which cells showed big round nucleous suggesting their transformation into phagocytic cells.

  16. Molecular composition of IMP1 ribonucleoprotein granules

    DEFF Research Database (Denmark)

    Jønson, Lars; Vikesaa, Jonas; Krogh, Anders

    2007-01-01

    Localized mRNAs are transported to sites of local protein synthesis in large ribonucleoprotein (RNP) granules, but their molecular composition is incompletely understood. Insulin-like growth factor II mRNA-binding protein (IMP) zip code-binding proteins participate in mRNA localization, and in mo......Localized mRNAs are transported to sites of local protein synthesis in large ribonucleoprotein (RNP) granules, but their molecular composition is incompletely understood. Insulin-like growth factor II mRNA-binding protein (IMP) zip code-binding proteins participate in mRNA localization...

  17. Neutrophil granules in health and disease

    DEFF Research Database (Denmark)

    Häger, M; Cowland, J B; Borregaard, N

    2010-01-01

    Neutrophil granules store proteins that are critically important for the neutrophil to move from the vascular bed to tissues and to kill microorganisms. This is illustrated in nature when individual proteins are deleted due to inherited mutations of their cognate genes, and such deficiencies result...... in the conditions leucocyte adhesion deficiency and chronic granulomatous disease. The granules of the neutrophil have traditionally been divided into two or three major types but are instead a continuum where several subtypes can be identified with differences in protein content and propensity for mobilization...

  18. Continuous melt granulation: Influence of process and formulation parameters upon granule and tablet properties.

    Science.gov (United States)

    Monteyne, Tinne; Vancoillie, Jochem; Remon, Jean-Paul; Vervaet, Chris; De Beer, Thomas

    2016-10-01

    The pharmaceutical industry has a growing interest in alternative manufacturing models allowing automation and continuous production in order to improve process efficiency and reduce costs. Implementing a switch from batch to continuous processing requires fundamental process understanding and the implementation of quality-by-design (QbD) principles. The aim of this study was to examine the relationship between formulation-parameters (type binder, binder concentration, drug-binder miscibility), process-parameters (screw speed, powder feed rate and granulation temperature), granule properties (size, size distribution, shape, friability, true density, flowability) and tablet properties (tensile strength, friability, dissolution rate) of four different drug-binder formulations using Design of experiments (DOE). Two binders (polyethylene glycol (PEG) and Soluplus®) with a different solid state, semi-crystalline vs amorphous respectively, were combined with two model-drugs, metoprolol tartrate (MPT) and caffeine anhydrous (CAF), both having a contrasting miscibility with the binders. This research revealed that the granule properties of miscible drug-binder systems depended on the powder feed rate and barrel filling degree of the granulator whereas the granule properties of immiscible systems were mainly influenced by binder concentration. Using an amorphous binder, the tablet tensile strength depended on the granule size. In contrast, granule friability was more important for tablet quality using a brittle binder. However, this was not the case for caffeine-containing blends, since these phenomena were dominated by the enhanced compression properties of caffeine Form I, which was formed during granulation. Hence, it is important to gain knowledge about formulation behavior during processing since this influences the effect of process parameters onto the granule and tablet properties.

  19. Granule size distributions after twin-screw granulation - Do not forget the feeding systems.

    Science.gov (United States)

    Meier, R; Thommes, M; Rasenack, N; Moll, K-P; Krumme, M; Kleinebudde, P

    2016-09-01

    The aim of this study was to investigate the influence of qualitatively different powder feeder performances on resulting granule size distributions after twin-screw granulation of a highly drug loaded, hydrophobic mixture and a mannitol powder. It was shown that powder feeder related problems usually cannot be identified by trusting in the values given by the feeder. Therefore, a newly developed model for the evaluation of the performance of powder feeders was introduced and it was tried to connect this model to residence time distributions in twin-screw granulation processes. The influence of feeder performances on resulting granule size distributions varied, depending on the applied screw configuration and the used powder. Regarding the hydrophobic and highly drug loaded formulation, which was granulated at an L/S-ratio of 0.5, a pure conveying screw and a medium kneading configuration, consisting of 60° kneading blocks were negatively influenced by poor feeder settings. For optimal settings more narrow distributions could be obtained. For an extensive kneading configuration good and poor settings resulted in mono-modal granule size distributions but were differing in the overall size. Mannitol, a model substance for a liquid sensitive formulation was granulated at an L/S-ratio of 0.075. It was even more important to maintain optimal feeding as mannitol was highly affected by poor feeder performances. Even an extensive kneading configuration could not level the errors in powder feeder performance, resulting in qualitatively different granule size distributions. The results of this study demonstrate the importance of detailed knowledge about applied feeding systems to gain optimal performance in twin-screw granulation.

  20. Statistical Evaluation of Non-Agglomerating Coating for Granulated Natural Asphalt

    Directory of Open Access Journals (Sweden)

    Tjokorde Walmiki Samadhi

    2011-04-01

    Full Text Available Agglomeration of granulated Buton natural asphalt during storage is of major concern in its large-scale commercial application. This work develops a simple test method to evaluate the performance of agglomeration-resistant coating for granulated Buton asphalt, consisting of water-based polymeric primary coating and mineral-based secondary coating. The method uses a static load cell to measure the agglomerated granule count fraction under simulated storage conditions. A 24-1 fractional factorial experiment with two replications is employed to evaluate the effect of coating drying temperature, drying time, asphalt to secondary coating mass ratio, and secondary coating type on the agglomerated count fraction at ambient temperature and 60 oC. The test is able to measure a statistically significant increase in agglomeration resistance when the coating is applied, with an agglomerated fraction of 17.5% at 60 oC. The test identifies asphalt to secondary coating weight ratio as a significant factor, with an ANOVA p-value much lower than other effects. A decrease in this mass ratio from 5:1 to 5:2 increases the agglomeration, which is hypothesized to be attributed to the hydrated cementitious phase between granular external surfaces. More work is needed to identify the acceptable fraction of agglomerated granules.

  1. Rock mechanics modeling based on soft granulation theory

    CERN Document Server

    Owladeghaffari, H

    2008-01-01

    This paper describes application of information granulation theory, on the design of rock engineering flowcharts. Firstly, an overall flowchart, based on information granulation theory has been highlighted. Information granulation theory, in crisp (non-fuzzy) or fuzzy format, can take into account engineering experiences (especially in fuzzy shape-incomplete information or superfluous), or engineering judgments, in each step of designing procedure, while the suitable instruments modeling are employed. In this manner and to extension of soft modeling instruments, using three combinations of Self Organizing Map (SOM), Neuro-Fuzzy Inference System (NFIS), and Rough Set Theory (RST) crisp and fuzzy granules, from monitored data sets are obtained. The main underlined core of our algorithms are balancing of crisp(rough or non-fuzzy) granules and sub fuzzy granules, within non fuzzy information (initial granulation) upon the open-close iterations. Using different criteria on balancing best granules (information pock...

  2. Seizure-Induced Motility of Differentiated Dentate Granule Cells Is Prevented by the Central Reelin Fragment

    Science.gov (United States)

    Orcinha, Catarina; Münzner, Gert; Gerlach, Johannes; Kilias, Antje; Follo, Marie; Egert, Ulrich; Haas, Carola A.

    2016-01-01

    Granule cell dispersion (GCD) represents a pathological widening of the granule cell layer in the dentate gyrus and it is frequently observed in patients with mesial temporal lobe epilepsy (MTLE). Recent studies in human MTLE specimens and in animal epilepsy models have shown that a decreased expression and functional inactivation of the extracellular matrix protein Reelin correlates with GCD formation, but causal evidence is still lacking. Here, we used unilateral kainate (KA) injection into the mouse hippocampus, an established MTLE animal model, to precisely map the loss of reelin mRNA-synthesizing neurons in relation to GCD along the septotemporal axis of the epileptic hippocampus. We show that reelin mRNA-producing neurons are mainly lost in the hilus and that this loss precisely correlates with the occurrence of GCD. To monitor GCD formation in real time, we used organotypic hippocampal slice cultures (OHSCs) prepared from mice which express enhanced green fluorescent protein (eGFP) primarily in differentiated dentate granule cells. Using life cell microscopy we observed that increasing doses of KA resulted in an enhanced motility of eGFP-positive granule cells. Moreover, KA treatment of OHSC resulted in a rapid loss of Reelin-producing interneurons mainly in the hilus, as observed in vivo. A detailed analysis of the migration behavior of individual eGFP-positive granule cells revealed that the majority of these neurons actively migrate toward the hilar region, where Reelin-producing neurons are lost. Treatment with KA and subsequent addition of the recombinant R3–6 Reelin fragment significantly prevented the movement of eGFP-positive granule cells. Together, these findings suggest that GCD formation is indeed triggered by a loss of Reelin in hilar interneurons. PMID:27516734

  3. Seizure-induced motility of differentiated dentate granule cells is prevented by the central Reelin fragment

    Directory of Open Access Journals (Sweden)

    Catarina Orcinha

    2016-07-01

    Full Text Available Granule cell dispersion (GCD represents a pathological widening of the granule cell layer (GCL in the dentate gyrus and it is frequently observed in patients with mesial temporal lobe epilepsy (MTLE. Recent studies in human MTLE specimens and in animal epilepsy models have shown that a decreased expression and functional inactivation of the extracellular matrix protein Reelin correlates with GCD formation, but causal evidence is still lacking. Here, we used unilateral kainate (KA injection into the mouse hippocampus, an established MTLE animal model, to precisely map the loss of reelin mRNA-synthesizing neurons in relation to GCD along the septotemporal axis of the epileptic hippocampus. We show that reelin mRNA-producing neurons are mainly lost in the hilus and that this loss precisely correlates with the occurrence of GCD. To monitor GCD formation in real time, we used organotypic hippocampal slice cultures (OHSC prepared from mice which express enhanced green fluorescent protein (eGFP primarily in differentiated dentate granule cells. Using life cell microscopy we observed that increasing doses of KA resulted in an enhanced motility of eGFP-positive granule cells. Moreover, KA treatment of OHSC resulted in a rapid loss of Reelin-producing interneurons mainly in the hilus as observed in vivo. A detailed analysis of the migration behavior of individual eGFP-positive granule cells revealed that the majority of these neurons actively migrate towards the hilar region where Reelin-producing neurons are lost. Treatment with KA and subsequent addition of the recombinant R3-6 Reelin fragment significantly prevented the movement of eGFP-positive granule cells. Together these findings suggest that GCD formation is indeed triggered by a loss of Reelin in hilar interneurons.

  4. Seizure-Induced Motility of Differentiated Dentate Granule Cells Is Prevented by the Central Reelin Fragment.

    Science.gov (United States)

    Orcinha, Catarina; Münzner, Gert; Gerlach, Johannes; Kilias, Antje; Follo, Marie; Egert, Ulrich; Haas, Carola A

    2016-01-01

    Granule cell dispersion (GCD) represents a pathological widening of the granule cell layer in the dentate gyrus and it is frequently observed in patients with mesial temporal lobe epilepsy (MTLE). Recent studies in human MTLE specimens and in animal epilepsy models have shown that a decreased expression and functional inactivation of the extracellular matrix protein Reelin correlates with GCD formation, but causal evidence is still lacking. Here, we used unilateral kainate (KA) injection into the mouse hippocampus, an established MTLE animal model, to precisely map the loss of reelin mRNA-synthesizing neurons in relation to GCD along the septotemporal axis of the epileptic hippocampus. We show that reelin mRNA-producing neurons are mainly lost in the hilus and that this loss precisely correlates with the occurrence of GCD. To monitor GCD formation in real time, we used organotypic hippocampal slice cultures (OHSCs) prepared from mice which express enhanced green fluorescent protein (eGFP) primarily in differentiated dentate granule cells. Using life cell microscopy we observed that increasing doses of KA resulted in an enhanced motility of eGFP-positive granule cells. Moreover, KA treatment of OHSC resulted in a rapid loss of Reelin-producing interneurons mainly in the hilus, as observed in vivo. A detailed analysis of the migration behavior of individual eGFP-positive granule cells revealed that the majority of these neurons actively migrate toward the hilar region, where Reelin-producing neurons are lost. Treatment with KA and subsequent addition of the recombinant R3-6 Reelin fragment significantly prevented the movement of eGFP-positive granule cells. Together, these findings suggest that GCD formation is indeed triggered by a loss of Reelin in hilar interneurons.

  5. Granulate of stainless steel as compensator material

    NARCIS (Netherlands)

    J.P.C. van Santvoort (J. P C)

    1995-01-01

    textabstractCompensators produced with computer controlled milling devices usually consist of a styrofoam mould, filled with an appropriate material. We investigated granulate of stainless steel as filling material. This cheap, easy to use, clean and re-usable material can be obtained with an averag

  6. Structural studies on methylated starch granules

    NARCIS (Netherlands)

    Vliegenthart, J.F.G.; Burgt, Y.E.M. van der; Bergsma, J.; Bleeker, I.P.; Mijland, P.J.H.C.; Kamerling, J.P.

    2000-01-01

    Granules of potato starch and amylopectin potato starch were methylated in aqueous alkaline suspension. Here, an overview is given of all structural aspects that have been studied with respect to the determination of the location of the substituents. Methods, which are generally applicable, were

  7. Starch Granule Variability in Wild Solanum Species

    Science.gov (United States)

    Because most of the dry matter of potato tubers is starch, an understanding of starch properties is important in potato improvement programs. Starch granule size is considered to influence tuber processing quality parameters such as gelatinization temperature, viscosity, and water holding capacity. ...

  8. Neutrophil granules in health and disease

    DEFF Research Database (Denmark)

    Häger, M; Cowland, J B; Borregaard, N

    2010-01-01

    Neutrophil granules store proteins that are critically important for the neutrophil to move from the vascular bed to tissues and to kill microorganisms. This is illustrated in nature when individual proteins are deleted due to inherited mutations of their cognate genes, and such deficiencies resu...

  9. Creep of granulated loose-fill insulation

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    with SP-Building Physics in Sweden and VTT Building Technology in Finland. For the round robin test a cellulosic fibre insulation material was used. The proposed standardised method for creep tests and theories are limited to cases when the granulated loose-fill material is exposed to a constant...

  10. Analysis of horizontal flows in the solar granulation

    CERN Document Server

    Noda, C Quintero; Suematsu, Y

    2016-01-01

    Solar limb observations sometimes reveal the presence of a satellite lobe in the blue wing of the Stokes I profile from pixels belonging to granules. The presence of this satellite lobe has been associated in the past to strong line of sight gradients and, as the line of sight component is almost parallel to the solar surface, to horizontal granular flows. We aim to increase the knowledge about these horizontal flows studying a spectropolarimetric observation of the north solar pole. We will make use of two state of the art techniques, the spatial deconvolution procedure that increases the quality of the data removing the stray light contamination, and spectropolarimetric inversions that will provide the vertical stratification of the atmospheric physical parameters where the observed spectral lines form. We inverted the Stokes profiles using a two component configuration, obtaining that one component is strongly blueshifted and displays a temperature enhancement at upper photospheric layers while the second ...

  11. High-shear granulation as a manufacturing method for cocrystal granules

    DEFF Research Database (Denmark)

    Rehder, Sönke; Christensen, Niels Peter Aae; Rantanen, Jukka

    2013-01-01

    influenced by the excipients, since in presence of calcium hydrogenphosphate, the poorly water-soluble salt calcium tartrate monohydrate was formed at high relative humidity. Interestingly, compactability was increased by cocrystal formation compared to that of the reference granules (piracetam...

  12. Apatite accumulation enhances the mechanical property of anammox granules

    NARCIS (Netherlands)

    Lin, Y. M.; Lotti, T.; Sharma, P. K.; van Loosdrecht, M. C. M.

    2013-01-01

    The strength of granular sludge is essential for the mechanical stability of the granules. Inorganic precipitants form a major factor influencing the strength of the granules. To check the possibility of apatite accumulation in anammox granules, and study its contribution to the mechanical strength

  13. Apoptotic cell death of cerebellar granule neurons in genetically ataxia (ax) mice.

    Science.gov (United States)

    Ohgoh, M; Yamazaki, K; Ogura, H; Nishizawa, Y; Tanaka, I

    2000-07-21

    An autosomal recessive neurological mutant, ataxia (ax) mouse, was investigated to determine whether neuronal cell death occurs in the brain. The brains of homozygotes (ax(J)/ax(J)) and phenotypically normal littermates (ax(J)/+ or +/+) aged at 23-38 days were examined by the terminal dUTP nick-end-labeling (TUNEL) method. A few TUNEL-positive cells were observed in the granule cell layer of the cerebellum, the dentate gyrus, and the olfactory bulb of normal mice. In the affected mice, the number of TUNEL-positive cells was significantly increased in the cerebellum, particularly in the granule cell layer, compared to normal littermates. The findings suggest that ax mice will be useful as a model for studies on the genetic basis of apoptotic neuronal cell death.

  14. Ingestion of colloid in a keratinized epithelium and its localization in membrane-coating granules.

    Science.gov (United States)

    Hayward, A F

    1976-04-01

    An electron-dense tracer (Thorotrast) was injected into the lamina propria of the keratinized epithelium of the buccal mucosa of rats. Electron microscopy showed that it crossed the basal lamina and penetrated the intercellular spaces of the epithelium up to the proximal layers of the stratum granulosum. Thorotrast was ingested by the epithelial cells in the stratum basale and stratum spinosum and localized in large vesicles and eventually in the membrane-coating granules. The latter, already known to contain lysosomal enzymes, are therefore to be regarded as secondary lysosomes formed in part as a sequel of endocytosis in deeper cell layers. The postulated origin of MCGs directly from the Golgi apparatus is rendered less likely by this observation. Thorotrast remaining in the cells when keratinization is completed is either dispersed into the cytoplasm or else incorporated into keratohyalin granules.

  15. Monitoring granulation rate processes using three PAT tools in a pilot-scale fluidized bed.

    Science.gov (United States)

    Tok, Ai Tee; Goh, Xueping; Ng, Wai Kiong; Tan, Reginald B H

    2008-01-01

    The purpose of this research was to analyze and compare the responses of three Process Analytical Technology (PAT) techniques applied simultaneously to monitor a pilot-scale fluidized bed granulation process. Real-time measurements using focused beam reflectance measurement (Lasentec FBRM) and near-infra red spectroscopy (Bruker NIR) were taken by inserting in-line probes into the fluidized bed. Non-intrusive acoustic emission measurements (Physical Acoustic AE) were performed by attaching piezoelectric sensors on the external wall of the fluidized bed. Powder samples were collected at regular intervals during the granulation process and characterized offline using laser diffraction, scanning electron microscopy, stereo-optical microscopy and loss on drying method. PAT data comprising chord length distribution and chord count (from FBRM), absorption spectra (from NIR) and average signal levels and counts (from AE) were compared with the particle properties measured using offline samples. All three PAT techniques were able to detect the three granulation regimes or rate processes (wetting and nucleation, consolidation and growth, breakage) to varying degrees of sensitivity. Being dependent on optical signals, the sensitivities of the FBRM and NIR techniques were susceptible to fouling on probe windows. The AE technique was sensitive to background fluidizing air flows and external interferences. The sensitivity, strengths and weaknesses of the PAT techniques examined may facilitate the selection of suitable PAT tools for process development and scale-up studies.

  16. Polyamines are present in mast cell secretory granules and are important for granule homeostasis.

    Directory of Open Access Journals (Sweden)

    Gianni García-Faroldi

    Full Text Available BACKGROUND: Mast cell secretory granules accommodate a large number of components, many of which interact with highly sulfated serglycin proteoglycan (PG present within the granules. Polyamines (putrescine, spermidine and spermine are absolutely required for the survival of the vast majority of living cells. Given the reported ability of polyamines to interact with PGs, we investigated the possibility that polyamines may be components of mast cell secretory granules. METHODOLOGY/PRINCIPAL FINDINGS: Spermidine was released by mouse bone marrow derived mast cells (BMMCs after degranulation induced by IgE/anti-IgE or calcium ionophore A23187. Additionally, both spermidine and spermine were detected in isolated mouse mast cell granules. Further, depletion of polyamines by culturing BMMCs with α-difluoromethylornithine (DFMO caused aberrant secretory granule ultrastructure, impaired histamine storage, reduced serotonin levels and increased β-hexosaminidase content. A proteomic approach revealed that DFMO-induced polyamine depletion caused an alteration in the levels of a number of proteins, many of which are connected either with the regulated exocytosis or with the endocytic system. CONCLUSIONS/SIGNIFICANCE: Taken together, our results show evidence that polyamines are present in mast cell secretory granules and, furthermore, indicate an essential role of these polycations during the biogenesis and homeostasis of these organelles.

  17. Experimental investigation of granule size and shape dynamics in twin-screw granulation.

    Science.gov (United States)

    Kumar, Ashish; Vercruysse, Jurgen; Bellandi, Giacomo; Gernaey, Krist V; Vervaet, Chris; Remon, Jean Paul; De Beer, Thomas; Nopens, Ingmar

    2014-11-20

    A twin-screw granulator (TSG), a promising equipment for continuous high shear wet granulation (HSWG), achieves the desired level of mixing by a combination of the appropriate screw configuration and a suitable set of process settings (e.g. feed rate, screw speed, etc.), thus producing a certain granule size and shape distribution (GSSD). However, the primary sizing and shaping mechanism behind the resulting distribution is not well understood due to the opacity of the multiphase system in the granulator. This study experimentally characterised the GSSD dynamics along the TSG barrel length in order to understand the function of individual screw modules and process settings, as well as their interaction. Particle size analysis of granules collected at the outlet of the TSG suggested significant interaction between the process and screw configuration parameters influencing the heterogeneity in the GSSD. By characterising the samples collected along the screw length, a variable influence of the screw modules at different process conditions was observed. At low liquid-to-solid ratio (L/S), the first kneading module seemed to play a significant role in mixing, whereas the second kneading module was found to be more involved in reshaping the granules. At high L/S and high throughput, aggregation mainly took place in the second kneading module changing the GSSD. The results obtained from this study will be further used for the calibration and validation of a mechanistic model and, hence, support future development of a more detailed understanding of the HSWG process in a TSG.

  18. Integrating Building Functions into Massive External Walls

    Directory of Open Access Journals (Sweden)

    Ahmed Hisham Hafez

    2016-05-01

    Full Text Available Well into the twentieth century, brick and stone were the materials used. Bricklaying and stonemasonry were the construction technologies employed for the exterior walls of virtually all major structures. However, with the rise in quality of life, the massive walls alone became incapable of fulfilling all the developed needs. Adjacent systems and layers had then to be attached to the massive layer. Nowadays, the external wall is usually composed of a layered construction. Each external wall function is usually represented by a separate layer or system. The massive layer of the wall is usually responsible for the load-bearing function.Traditional massive external walls vary in terms of their external appearance, their composition and attached layers. However, their design and construction process is usually a repeated process. It is a linear process where each discipline is concerned with a separate layer or system. These disciplines usually take their tasks away and bring them back to be re-integrated in a layered manner. New massive technologies with additional function have recently become available.Such technologies can provide the external wall with other functions in addition to its load-bearing function. The purpose of this research is to map the changes required to the traditional design and construction process when massive technologies with additional function are applied in external walls. Moreover, the research aims at assessing the performance of massive solutions with additional function when compared to traditional solutions in two different contexts, the Netherlands and Egypt.Through the analysis of different additional function technologies in external walls, a guidance scheme for different stakeholders is generated. It shows the expected process changes as related to the product level and customization level. Moreover, the research concludes that the performance of additional insulating technologies, and specifically Autoclaved

  19. Microbial starch binding domains are superior to granule bound starch synthase 1 for anchoring luciferase to potato starch granules

    NARCIS (Netherlands)

    Ji, Q.; Vincken, J.P.; Suurs, L.C.J.M.; Visser, R.G.F.

    2006-01-01

    Microbial starch-binding domains (SBD) and granule-bound starch synthase I (GBSSI) are proteins which are accumulated in potato starch granules. The efficiency of SBD and GBSSI for targeting active luciferase reporter proteins to granules during starch biosynthesis was compared. GBSSI or SBD sequenc

  20. Form, formation, and deformation : the influence of material properties and process conditions on the shape of granules produced by high shear granulation

    NARCIS (Netherlands)

    Bouwman, Anneke Margriet

    2005-01-01

    High shear granulation The introduction of this thesis describes the high shear granulation process. High shear granulation is a commonly used unit operation to produce larger granules of primary particles. The granulation process has been described to consist of different stages. The initial growth

  1. Functional properties of granule cells with hilar basal dendrites in the epileptic dentate gyrus.

    Science.gov (United States)

    Kelly, Tony; Beck, Heinz

    2017-01-01

    The maturation of adult-born granule cells and their functional integration into the network is thought to play a key role in the proper functioning of the dentate gyrus. In temporal lobe epilepsy, adult-born granule cells in the dentate gyrus develop abnormally and possess a hilar basal dendrite (HBD). Although morphological studies have shown that these HBDs have synapses, little is known about the functional properties of these HBDs or the intrinsic and network properties of the granule cells that possess these aberrant dendrites. We performed patch-clamp recordings of granule cells within the granule cell layer "normotopic" from sham-control and status epilepticus (SE) animals. Normotopic granule cells from SE animals possessed an HBD (SE(+) HBD(+) cells) or not (SE(+) HBD(-) cells). Apical and basal dendrites were stimulated using multiphoton uncaging of glutamate. Two-photon Ca(2+) imaging was used to measure Ca(2+) transients associated with back-propagating action potentials (bAPs). Near-synchronous synaptic input integrated linearly in apical dendrites from sham-control animals and was not significantly different in apical dendrites of SE(+) HBD(-) cells. The majority of HBDs integrated input linearly, similar to apical dendrites. However, 2 of 11 HBDs were capable of supralinear integration mediated by a dendritic spike. Furthermore, the bAP-evoked Ca(2+) transients were relatively well maintained along HBDs, compared with apical dendrites. This further suggests an enhanced electrogenesis in HBDs. In addition, the output of granule cells from epileptic tissue was enhanced, with both SE(+) HBD(-) and SE(+) HBD(+) cells displaying increased high-frequency (>100 Hz) burst-firing. Finally, both SE(+) HBD(-) and SE(+) HBD(+) cells received recurrent excitatory input that was capable of generating APs, especially in the absence of feedback inhibition. Taken together, these data suggest that the enhanced excitability of HBDs combined with the altered intrinsic

  2. Protein Methylation and Stress Granules: Posttranslational Remodeler or Innocent Bystander?

    Directory of Open Access Journals (Sweden)

    Wen Xie

    2011-01-01

    Full Text Available Stress granules contain a large number of post-translationally modified proteins, and studies have shown that these modifications serve as recruitment tags for specific proteins and even control the assembly and disassembly of the granules themselves. Work originating from our laboratory has focused on the role protein methylation plays in stress granule composition and function. We have demonstrated that both asymmetrically and symmetrically dimethylated proteins are core constituents of stress granules, and we have endeavored to understand when and how this occurs. Here we seek to integrate this data into a framework consisting of the currently known post-translational modifications affecting stress granules to produce a model of stress granule dynamics that, in turn, may serve as a benchmark for understanding and predicting how post-translational modifications regulate other granule types.

  3. Enhanced aerobic nitrifying granulation by static magnetic field.

    Science.gov (United States)

    Wang, Xin-Hua; Diao, Mu-He; Yang, Ying; Shi, Yi-Jing; Gao, Ming-Ming; Wang, Shu-Guang

    2012-04-01

    One of the main challenging issues for aerobic nitrifying granules in treating high strength ammonia wastewater is the long granulation time required for activated sludge to transform into aerobic granules. The present study provides a novel strategy for enhancing aerobic nitrifying granulation by applying an intensity of 48.0mT static magnetic field. The element analysis showed that the applied magnetic field could promote the accumulation of iron compounds in the sludge. And then the aggregation of iron decreased the full granulation time from 41 to 25days by enhancing the setting properties of granules and stimulating the secretion of extracellular polymeric substances (EPS). Long-term, cycle experiments and fluorescence in-situ hybridization (FISH) analysis proved that an intensity of 48.0mT magnetic field could enhance the activities and growth of nitrite-oxidizing bacteria (NOB). These findings suggest that magnetic field is helpful and reliable for accelerating the aerobic nitrifying granulation.

  4. Temporal and spacial relationships between PSA-NCAM-expressing, newly generated granule cells, and radial glia-like cells in the adult dentate gyrus.

    Science.gov (United States)

    Seki, T; Arai, Y

    1999-08-02

    The granule cell layer of the adult dentate gyrus possesses two characteristics of an immature nervous system. The first is that granule cells continue to be generated in the innermost region of the granule cell layer, and newly generated and developing granule cells in the adult express highly polysialylated neural cell adhesion molecule (PSA-NCAM). PSA-NCAM-expressing apical dendrites have dynamically unstable processes such as irregular shafts and many stick-like or fan-shaped fine processes. The second is that radial glia-like cells expressing glial fibrillary acidic protein (GFAP) remain in a similar region of the granular layer. The numbers of PSA-NCAM-expressing granule cells and GFAP-expressing radial glia-like cells show a parallel age-dependent decrease during aging. Moreover, by using confocal laser scanning microscopy and immunoelectron microscopy, we demonstrated that PSA-NCAM-expressing dendrites and GFAP-expressing radial processes are partly in contact with each other, and occasionally the radial glial processes envelop the PSA-NCAM-positive dendritic processes. The temporal and spatial relationship between the two immature elements suggests that the processes of the radial glia-like cells are closely associated with the dendritic growth of the newly generated granule cells in the adult dentate gyrus and that these two immature features of neurons and glia in the dentate gyrus diminish with age.

  5. Hemoglobin expression in rat experimental granulation tissue

    Institute of Scientific and Technical Information of China (English)

    Miretta Tommila; Christoffer Stark; Anne Jokilammi; Ville Peltonen; Risto Penttinen; Erika Ekholm

    2011-01-01

    The general opinion that hemoglobin is only a carrier protein for oxygen and carbon dioxide has been challenged by several recent studies showing hemoglobin expression in other cells than those of the erythroid series, for example, in macrophages. We discovered β-globin expression in rat experimental granulation tissue induced by subcutaneously implanted cellulose sponges. Closer investigation revealed also α-globin expression. The first peak of the biphasic globin expression noticed during granulation tissue formation correlated with the invasion of monocytes/macrophages, whereas the second one seemed to be connected to the appearance of hematopoietic progenitors. Data presented in this study indicate globin expression both in macrophages and in immature erythroid cells as validated by erythroid-specific markers.

  6. Zymophagy: Selective Autophagy of Secretory Granules

    Directory of Open Access Journals (Sweden)

    Maria I. Vaccaro

    2012-01-01

    Full Text Available Timing is everything. That's especially true when it comes to the activation of enzymes created by the pancreas to break down food. Pancreatic enzymes are packed in secretory granules as precursor molecules called zymogens. In physiological conditions, those zymogens are activated only when they reach the gut, where they get to work releasing and distributing nutrients that we need to survive. If this process fails and the enzymes are prematurely activated within the pancreatic cell, before they are released from the gland, they break down the pancreas itself causing acute pancreatitis. This is a painful disease that ranges from a mild and autolimited process to a severe and lethal condition. Recently, we demonstrated that the pancreatic acinar cell is able to switch on a refined mechanism that could explain the autolimited form of the disease. This is a novel selective form of autophagy named zymophagy, a cellular process to specifically detect and degrade secretory granules containing activated enzymes before they can digest the organ. In this work, we revise the molecules and mechanisms that mediate zymophagy, a selective autophagy of secretory granules.

  7. Influence of binder droplet dimension on granulation rate during fluidized bed granulation.

    Science.gov (United States)

    Fujiwara, Maya; Dohi, Masafumi; Otsuka, Tomoko; Yamashita, Kazunari; Sako, Kazuhiro

    2013-01-01

    Here, we statistically identified the critical factor of the granulation rate during the fluidized bed granulation process. Lactose was selected as the excipient and was granulated with several binders, including hydroxypropyl cellulose, hydroxypropyl methyl cellulose, and polyvinylpyrrolidone. The viscosity, density, and surface tension of the binder solution, contact angle, and the work done during adhesion and cohesion between the binder and lactose, mist diameter, Stokes number, and the dimension of the droplet were considered. The Stokes number was defined as the ratio of the inertial force to the viscous-damping force of a particle. We confirmed that droplet diameter after adhesion had the highest correlation coefficient with the granulation rate constant in our investigated parameters. Partial least squares regression revealed two critical principal components of the granulation rate: one relating to the droplet dimension, which is composed of mist diameter and diameter and thickness of the droplet after adhesion of the binder to the lactose surface; and the other relating to wettability, which involves the work done during adhesion and cohesion, surface tension, and the thickness of the droplet after adhesion of the binder to the lactose surface.

  8. K8型单层球面网壳基于AUTODYN的外爆响应分析%RESPONSES OF SINGLE-LAYER RETICULATED DOMES SUBJECTED TO EXTERNAL BLAST LOADING USING AUTODYN

    Institute of Scientific and Technical Information of China (English)

    杨帆; 支旭东; 范峰

    2015-01-01

    The dynamic responses of single-layer reticulated domes are analyzed through the explicit dynamic finite element software AUTODYN.The load is applied using the FSI method,and the material is adopted using a multi-segment linear model for steel.First,the accuracy is verified by analyzing near-field and far-field explosions.Then the responses of a 20m span reticulated dome are obtained under external blast loading,including the loading spread,change in maximum nodal displacement,and development of plastic members.The laws governing structural response are researched,accounting for the mass of TNT,explosion distance,and explosion height.The results of numerical simulations indicate that AUTODYN can be used to analyze near-field and far-field explosions;the reticulated dome experiences two main shock wave loadings under external blast loading and the maximum nodal displacement occurs at the first shock wave loading;the plasticity development of structural members ends at 0.05 seconds;the structural responses strengthen with the increase of TNT mass and the explosion height,but weaken with the increase of explosion distance.%该文采用显式动力有限元软件AUTODYN对K8型单层球面网壳在外爆荷载下的动态响应进行了研究.数值模拟中采用流固耦合方法施加荷载,钢材采用多段线性模型,首先验证了AUTODYN进行近场爆炸分析和远场爆炸分析的准确性;考察了跨度为20 m的网壳结构在外爆荷载下的荷载传播规律、最大节点位移变化规律以及塑性杆件发展规律,考察了跨度为40 m网壳结构在TNT质量、炸点距离以及炸点高度参数变化下的结构响应规律.数值分析的结果表明:AUTODYN具备准确进行近场爆炸和远场爆炸分析的能力;单层球面网壳在外爆荷载下主要经历两次冲击波荷载,最大节点位移出现在第一次冲击荷载作用时,结构杆件的塑性发展在0.05 s后基本结束;网壳结构的响应随TNT质量增加和

  9. Optimizing granules size distribution for aerobic granular sludge stability: Effect of a novel funnel-shaped internals on hydraulic shear stress.

    Science.gov (United States)

    Zhou, Jia-Heng; Zhang, Zhi-Ming; Zhao, Hang; Yu, Hai-Tian; Alvarez, Pedro J J; Xu, Xiang-Yang; Zhu, Liang

    2016-09-01

    A novel funnel-shaped internals was proposed to enhance the stability and pollutant removal performance of an aerobic granular process by optimizing granule size distribution. Results showed up to 68.3±1.4% of granules in novel reactor (R1) were situated in optimal size range (700-1900μm) compared to less than 29.7±1.1% in conventional reactor (R2), and overgrowth of large granules was effectively suppressed without requiring additional energy. Consequently, higher total nitrogen (TN) removal (81.6±2.1%) achieved in R1 than in R2 (48.1±2.7%). Hydraulic analysis revealed the existence of selectively assigning hydraulic pressure in R1. The total shear rate (τtotal) on large granules was 3.07±0.14 times higher than that of R2, while τtotal of small granules in R1 was 70.7±4.6% in R2. Furthermore, large granules in R1 with intact extracellular polymeric substances (EPS) outer layer structure entrapped hydroxyapatite at center, which formed a core structure and further enhanced the stability of aerobic granules.

  10. Capsules with external navigation and triggered release.

    Science.gov (United States)

    Shchukin, Dmitry G; Shchukina, Elena

    2014-10-01

    Encapsulation is an important technology for pharmaceutical industry, food production, et cetera. Its current level of development requires capsule functionalization. One of the interesting ideas to provide new functionality to the microcapsule and nanocapsule is layer-by-layer deposition of functional species. This technique provides step-by-step adsorption of various species (polyelectrolytes, nanoparticles, proteins) when the layer growth is controlled by electrostatic, hydrogen bonding, hydrophobic forces and forming multilayer shells with nanometer precision. This review article introduces recent achievements of layer-by-layer technique attaining external navigation ability and release properties the capsule shell.

  11. The External Degree.

    Science.gov (United States)

    Houle, Cyril O.

    This book examines the external degree in relation to the extremes of attitudes, myths, and data. Emphasis is placed on the emergence of the American external degree, foreign external-degree programs, the purpose of the external degree, the current scene, institutional issues, and problems of general policy. (MJM)

  12. GSK-3β Overexpression Alters the Dendritic Spines of Developmentally Generated Granule Neurons in the Mouse Hippocampal Dentate Gyrus

    Science.gov (United States)

    Pallas-Bazarra, Noemí; Kastanauskaite, Asta; Avila, Jesús; DeFelipe, Javier; Llorens-Martín, María

    2017-01-01

    The dentate gyrus (DG) plays a crucial role in hippocampal-related memory. The most abundant cellular type in the DG, namely granule neurons, are developmentally generated around postnatal day P6 in mice. Moreover, a unique feature of the DG is the occurrence of adult hippocampal neurogenesis, a process that gives rise to newborn granule neurons throughout life. Adult-born and developmentally generated granule neurons share some maturational aspects but differ in others, such as in their positioning within the granule cell layer. Adult hippocampal neurogenesis encompasses a series of plastic changes that modify the function of the hippocampal trisynaptic network. In this regard, it is known that glycogen synthase kinase 3β (GSK-3β) regulates both synaptic plasticity and memory. By using a transgenic mouse overexpressing GSK-3β in hippocampal neurons, we previously demonstrated that the overexpression of this kinase has deleterious effects on the maturation of newborn granule neurons. In the present study, we addressed the effects of GSK-3β overexpression on the morphology and number of dendritic spines of developmentally generated granule neurons. To this end, we performed intracellular injections of Lucifer Yellow in developmentally generated granule neurons of wild-type and GSK-3β-overexpressing mice and analyzed the number and morphologies of dendritic spines (namely, stubby, thin and mushroom). GSK-3β overexpression led to a general reduction in the number of dendritic spines. In addition, it caused a slight reduction in the percentage, head diameter and length of thin spines, whereas the head diameter of mushroom spines was increased. PMID:28344548

  13. WET-GRANULATION RESEARCH WITH APPLICATION TO SCALE-UP

    Institute of Scientific and Technical Information of China (English)

    Gabriel I.Tardos

    2005-01-01

    Granulation is a unit operation by which larger granules are produced from fine, powdery particles to improve appearance, flow properties and mixedness, reduce dustiness and, in general, produce engineered particles with superior attributes. Agglomeration in wet granulation is achieved by introducing a "binder" fluid onto a shearing mass of fine powders. This paper gives a general overview of the process with emphasis on a simplified granulation model based on a dimensionless parameter containing inertia and viscous dissipation energies between colliding particles: the so-called Stokes number. The model incorporates most common features of all granulation devices (mixers) used in the pharmaceutical industry.Also described in the paper is a computer simulation that captures the movement of flowing powder in an ideal mixer-granulator with constant shear rate. A fraction of the total number of particles is wet (covered by binder and therefore "sticky") while the rest of the particles are dry. The numerical simulation depicts two distinct regimes of agglomeration found in a typical granulator: granule growth and subsequent breakup. During granule growth-simulations, final granule size and shape distributions are obtained by analyzing the size and shape of formed granules using a pattern-recognition technique. A second kind of simulation, also using rapid granular flow modeling, follows the rotation and deformation of an "agglomerate" held together by a liquid binder. Results from these simulations yield critical values of the Stokes number. Below the critical value, the agglomerates are stable and only rotate in response to shear while above the critical value they break into two or more pieces. At the critical value, they attain a steady elongated shape. Using values of the critical Stokes number, the model predicts the size of formed granules.The existence of the critical state in which granules attain a characteristic elongated shape is used to measure shear forces

  14. Formation of artificial granules for proving gelation as the main mechanism of aerobic granulation in biological wastewater treatment.

    Science.gov (United States)

    Li, Yun; Yang, Shu-Fang; Zhang, Jian-Jun; Li, Xiao-Yan

    2014-01-01

    In this study, gelation-facilitated biofilm formation as a new mechanism is proposed for the phenomenon of aerobic granulation in biological wastewater treatment. To obtain an experimental proof for the gelation-based theory, the granulation process was simulated in a chemical system using latex particles for bacterial cells and organic polymers (alginate and peptone) for extracellular polymeric substances (EPS) in a solution with the addition of cations (Ca²⁺, Mg²⁺ and Fe³⁺). The results showed that at a low alginate content (70 mg g⁻¹ mixed liquid suspended solids (MLSS)) flocculation was observed in the suspension with loose flocs. At a higher alginate content (180 mg g⁻¹ MLSS), together with discharge of small flocs, formation of artificial gel granules was successfully achieved leading to granulation. The artificial granules show a morphological property similar to that of actual microbial granules. However, if the protein content increased, granulation became difficult with little gel formation. The experimental work demonstrates the importance of the bonding interactions between EPS functional groups and cations in gel formation and granulation. The laboratory results on the formation of artificial granules provide a sound proof for the theory of gelation-facilitated biofilm formation as the main mechanism for aerobic granulation in sludge suspensions.

  15. Visualization and understanding of the granulation liquid mixing and distribution during continuous twin screw granulation using NIR chemical imaging.

    Science.gov (United States)

    Vercruysse, Jurgen; Toiviainen, Maunu; Fonteyne, Margot; Helkimo, Niko; Ketolainen, Jarkko; Juuti, Mikko; Delaet, Urbain; Van Assche, Ivo; Remon, Jean Paul; Vervaet, Chris; De Beer, Thomas

    2014-04-01

    Over the last decade, there has been increased interest in the application of twin screw granulation as a continuous wet granulation technique for pharmaceutical drug formulations. However, the mixing of granulation liquid and powder material during the short residence time inside the screw chamber and the atypical particle size distribution (PSD) of granules produced by twin screw granulation is not yet fully understood. Therefore, this study aims at visualizing the granulation liquid mixing and distribution during continuous twin screw granulation using NIR chemical imaging. In first instance, the residence time of material inside the barrel was investigated as function of screw speed and moisture content followed by the visualization of the granulation liquid distribution as function of different formulation and process parameters (liquid feed rate, liquid addition method, screw configuration, moisture content and barrel filling degree). The link between moisture uniformity and granule size distributions was also studied. For residence time analysis, increased screw speed and lower moisture content resulted to a shorter mean residence time and narrower residence time distribution. Besides, the distribution of granulation liquid was more homogenous at higher moisture content and with more kneading zones on the granulator screws. After optimization of the screw configuration, a two-level full factorial experimental design was performed to evaluate the influence of moisture content, screw speed and powder feed rate on the mixing efficiency of the powder and liquid phase. From these results, it was concluded that only increasing the moisture content significantly improved the granulation liquid distribution. This study demonstrates that NIR chemical imaging is a fast and adequate measurement tool for allowing process visualization and hence for providing better process understanding of a continuous twin screw granulation system.

  16. Bone regeneration in rabbit calvaria with novel monetite granules.

    Science.gov (United States)

    Tamimi, Faleh; Torres, Jesús; Kathan, Carlos; Baca, Rafael; Clemente, Celia; Blanco, Luis; Lopez Cabarcos, Enrique

    2008-12-15

    The aim of this study was to evaluate whether local application of monetite granules would induce bone regeneration in critical size defects on rabbits calvaria. Novel monetite granules were synthesized by thermal conversion of preset brushite cement. Twelve female New Zealand rabbits were used for this study. Two identical 10-mm-diameter bicortical cranial defects were created in each animal. One of the defects was grafted with monetite granules while the contralateral was left unfilled as negative control. Animals were sacrificed at 4 and 8 weeks after surgery, and biopsies were taken for histological and histomorphometrical evaluation under light microscopy. Wilcoxon test was used for statistical analysis. The histological observations showed signs of graft resorption as newly formed bone tissue grew surrounding and penetrating the monetite granules. Histomorphometric evaluation showed that the augmented bone volume as well as the augmented mineral tissue was higher in the defects treated with monetite granules (p monetite granules in bone defects enhances bone healing significantly.

  17. Flow of formulation granules through a conical hopper

    Directory of Open Access Journals (Sweden)

    Mazumder B

    2008-01-01

    Full Text Available Gravity flow characteristics of various pharmaceutical granules through static conical hoppers of different cone angles were studied. Mass flow rate depends on properties of granules and cone angles when environmental conditions such as temperature and relative humidity are kept within a fixed range. The granules were made with active pharmaceutical ingredients as per Indian pharmacopoeia with other additives like binders and diluents. Lubricants were added with the granules to observe their effects on mass flow rate. Magnesium stearate and colloidal silicon dioxide of different proportions were used as lubricants after granulation. A new dimensionally analyzed equation was developed to predict flow rate of the granules. The developed equation agreed well with the experimental data with a percentage deviation of ±10%.

  18. Information granules and entropy theory in information systems

    Institute of Scientific and Technical Information of China (English)

    LIANG JiYe; QIAN YuHua

    2008-01-01

    Information granulation and entropy theory are two main approaches to research uncertainty of an information system,which have been widely applied in many practical issues.In this paper,the characterizations and representations of information granules under various binary relations are investigated in information systems,an axiom definition of information granulation is presented,and some existing definitions of information granulation become its special forms.Entropy theory in information systems is further developed and the granulation monotonicity of each of them is proved.Moreover,the complement relationship between information granulation and entropy is established.This investigation unifies the results of measures for uncertainties in complete information systems and incomplete information systems.

  19. Extent of mossy fiber sprouting in patients with mesiotemporal lobe epilepsy correlates with neuronal cell loss and granule cell dispersion.

    Science.gov (United States)

    Schmeiser, Barbara; Zentner, Josef; Prinz, Marco; Brandt, Armin; Freiman, Thomas M

    2017-01-01

    The most frequent finding in temporal lobe epilepsy is hippocampal sclerosis, characterized by selective cell loss of hippocampal subregions CA1 and CA4 as well as mossy fiber sprouting (MFS) towards the supragranular region and granule cell dispersion. Although selective cell loss is well described, its impact on mossy fiber sprouting and granule cell dispersion remains unclear. In a single center series, we examined 319 human hippocampal specimens, collected in a 15-years period. Hippocampal specimens were stained for neuronal loss, granule cell dispersion (Wyler scale I-IV, Neu-N, HE) and mossy fiber sprouting (synaptoporin-immunohistochemistry). For seizure outcome Engel score I-IV was applied. In Wyler I and II specimens, mossy fibers were found along their natural projection exclusively in CA4 and CA3. In Wyler III and IV, sprouting of mossy fibers into the molecular layer and a decrease of mossy fibers in CA4 and CA3 was detected. Mean granule cell dispersion was extended from 121μm to 185μm and correlated with Wyler III-IV as well as mossy fiber sprouting into the molecular layer. Wyler grade, mossy fiber sprouting and granule cell dispersion correlated with longer epilepsy duration, late surgery and higher preoperative seizure frequency. Parameters analyzed above did not correlate with postoperative seizure outcome. Mossy fiber sprouting might be a compensatory phenomenon of cell death of the target neurons in CA4 and CA3 in Wyler III-IV. Axonal reorganization of granule cells is accompanied by their migration and is correlated with the severity of cell loss and epilepsy duration. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Giant arachnoid granulation in a patient with benign intracranial hypertension

    Energy Technology Data Exchange (ETDEWEB)

    Kiroglu, Yilmaz; Yaqci, Baki; Cirak, Bayram; Karabulut, Nevzat [Pamukkale University, Department of Radiology, School of Medicine, Denizli (Turkey)

    2008-10-15

    We report magnetic resonance (MR), computed tomography (CT) and angiographic imaging of an unusual giant arachnoid granulation in the superior sagittal sinus in a man with headache and vertigo. Intrasinus pressure measurements revealed a significant pressure gradient across the lesion. MR imaging is useful to identify giant arachnoid granulation and dural sinus thrombosis, whereas dural sinus pressure measurement in certain cases of giant arachnoid granulations can be used to evaluate the lesion as the cause of the patient's symptoms. (orig.)

  1. Comparison of low shear, high shear, and fluid bed granulation during low dose tablet process development.

    Science.gov (United States)

    Hausman, Debra S

    2004-03-01

    Three processing methods were compared to develop a low dose (0.1%) immediate release tablet. Similar formulations were used to evaluate low shear, high shear, and fluid bed granulation methods. For each granulation process, the drug was dissolved or suspended in the granulating fluid and sprayed into the granulator. Both water and methanol were evaluated as granulating fluids. The low shear granulation was performed in a Patterson-Kelley V-Blender with I-bar. The high shear granulation was performed in a GRAL (top entry impeller) and a Diosna (bottom mounted impeller). Fluid bed granulation was also performed using top-spray. Acceptable content uniformity was obtained using each technology. The type of granulator and granulating solvent affected the granulation particle size distributions and bulk/tap densities. However, the addition of extragranular microcrystalline cellulose minimized the effect of variable granulation properties and allowed similar tablets to be produced from each granulation process.

  2. Freeze granulation for the processing of silicon nitride ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Lyckfeldt, O. [Swedish Ceramic Inst., Goeteborg (Sweden); Rundgren, K. [Permascand AB, Ljungaverk (Sweden); Sjoestedt, M. [PowderPro HB, Hisings Backa (Sweden)

    2004-07-01

    Freeze granulation (LS-2, PowderPro HB, Sweden) has been demonstrated as a favourable alternative to conventional granulation methods (spray drying, sieve granulation etc) in the production of granules for the pressing of high-performance ceramic powders. Freeze granulation/freeze drying prevents the migration of pressing aids or particle fines to the granule surface, as is the case in spray drying. This ensures granule homogeneity and an easy breakdown of granules during pressing. This, in turn, results in defect minimisation and optimal conditions for the sintering and the development of the desired material properties. In this study silicon nitride materials have been produced using freeze granulation, pressing and sintering to validate the performance. Materials with competitive properties were manufactured based on medium-cost, direct-nitrided powders (SicoNide P95, Permascand AB, Sweden), various pressing and sintering aid compositions as well as various pressing and sintering schedules. MgO vs Fe{sub 2}O{sub 3} as sintering aid, PEG vs PVA as binder and higher pressure at the initial uniaxial pressing were found to promote the sintering performance. (orig.)

  3. Application of the Molecular Combing Technique to Starch Granules

    Directory of Open Access Journals (Sweden)

    Zhong-Dong Liu

    2009-10-01

    Full Text Available The molecular combing technique was used to dissociate the nanostructural units of starch granules from the starch fragments after a gelatinization process. With the help of atomic force microscopy (AFM, we observed that some nanostructural chains were just flowing out of the granules. It proves that there are substantive nanostructural units in the starch granules, a phenomenon not previously observed, so these nanostructural units were defined as suspected intermediates. Furthermore, we conclude that blocklets of starch granules are formed through twisting or distortion of nanochains.

  4. CHARACTERIZATION AND ADSORPTION PROPERTIES OF POROUS CARBON NANOFIBER GRANULES

    Institute of Scientific and Technical Information of China (English)

    Jiuling Chen; Qinghai Chen; Yongdan Li

    2006-01-01

    The properties of the porous granules produced by agglomeration of catalytically grown carbon nanofibers were investigated in this work. The single pellet crushing strength of the granules is high, e.g., 1.6-2.5 MPa. They have adsorption at 298 K of benzene or phenol on the granules is much lower than that on activated carbon and depends not only on the specific surface area of the carbon material but also on the sewing structure of the granules and the morphology of the carbon nanofibers. Treatment in dilute nitric acid appreciably reduces such adsorption.

  5. Aerobic granulation of pure bacterial strain Bacillus thuringiensis

    Institute of Scientific and Technical Information of China (English)

    Sunil S ADAV; Duu-Jong LEE

    2008-01-01

    The objective of this study is to cultivate aer-obic granules by pure bacterial strain, Bacillus thuringien-sis, in a sequencing batch reactor. Stable granules sized 2.0-2.2 mm were formed in the reactor after a five-week cultivation. These granules exhibited excellent settling attributes, and degraded phenol at rates of 1.49 and concentration, respectively. Confocal laser scanning microscopic test results show that Bacillus thuringiensis was distributed over the initial small aggregates, and the outer edge of the granule was away from the core regime in the following stage.

  6. Osseointegration of alumina bioceramic granules: A comparative experimental study

    Science.gov (United States)

    Rerikh, V. V.; Avetisyan, A. R.; Zaydman, A. M.; Anikin, K. A.; Bataev, V. A.; Nikulina, A. A.; Sadovoy, M. A.; Aronov, A. M.; Semantsova, E. S.

    2016-08-01

    To perform a comparative analysis of osseointegration of bioceramic alumina-based granules, hydroxyapatite-based granules, and deproteinized bone granules. The experiment was conducted on 52 adult male Kyoto-Wistar rats weighing 350 to 520 g. The animals were divided into five matched groups that differed only in the type of an implanted material. The granules were implanted in the lumbar vertebral bodies and in the distal right femur of each laboratory animal. Two months after surgery, the animals were euthanized, followed by tissue sampling for morphological studies. An examination of specimens from the groups with implanted alumina granules revealed the newly formed trabecular bone with remodeling signs. The bone tissue filled the intragranular space, tightly adhering to the granule surface. There was no connective tissue capsule on the border between bone tissue and alumina granules. Cylindrical bioceramic alumina-based granules with an open internal channel have a higher strength surpassing than that of analogs and the osseointegration ability close to that of hydroxyapatite and deproteinized bone granules.

  7. Microbial granulation for lactic acid production.

    Science.gov (United States)

    Kim, Dong-Hoon; Lee, Mo-Kwon; Hwang, Yuhoon; Im, Wan-Taek; Yun, Yeo-Myeong; Park, Chul; Kim, Mi-Sun

    2016-01-01

    This work investigated the formation of microbial granules to boost the productivity of lactic acid (LA). The flocculated form of LA-producing microbial consortium, dominated by Lactobacillus sp. (91.5% of total sequence), was initially obtained in a continuous stirred-tank reactor (CSTR), which was fed with 2% glucose and operated at a hydraulic retention time (HRT) of 12 h and pH 5.0 ± 0.1 under a thermophilic condition (50°C). The mixed liquor in the CSTR was then transferred to an up-flow anaerobic sludge blanket reactor (UASB). The fermentation performance and granulation process were monitored with a gradual decrease of HRT from 8.0 to 0.17 h, corresponding to an increase in the substrate loading from 60 to 2,880 g glucose L(-1) d(-1) . As the operation continued, the accumulation of biomass in the UASB was clearly observed, which changed from flocculent to granular form with decrease in HRT. Up to the HRT decrease to 0.5 h, the LA concentration was maintained at 19-20 g L(-1) with over 90% of substrate removal efficiency. However, further decrease of HRT resulted in a decrease of LA concentration with increase in residual glucose. Nevertheless, the volumetric LA productivity continuously increased, reaching 67 g L-fermenter (-1) h(-1) at HRT 0.17 h. The size of LA-producing granules and hydrophobicity gradually increased with decrease in HRT, reaching 6.0 mm and 60%, respectively. These biogranules were also found to have high settling velocities and low porosities, ranging 2.69-4.73 cm s(-1) and 0.39-0.92, respectively. © 2015 Wiley Periodicals, Inc.

  8. Distribution of binder in granules produced by means of twin screw granulation

    DEFF Research Database (Denmark)

    Fonteyne, Margot; Fussell, Andrew Luke; Vercruysse, Jurgen

    2014-01-01

    -granular distribution of PVP was evaluated by means of hyperspectral coherent anti-Stokes Raman scattering (CARS) microscopy. For the evaluated formulation, no PVP rich zones were detected when applying a lateral spatial resolution of 0.5 μm, indicating that PVP is homogenously distributed within the granules....

  9. In planta modification of potato starch granule biogenesis by different granule-bound fusion proteins

    NARCIS (Netherlands)

    Nazarian, F.

    2007-01-01

    Starch is composed of amylose and amylopectin and it is deposited in amyloplasts/choloroplasts as semi-crystalline granules. Many biosynthetic enzymes are involved in starch degradation and biosynthesis. Some microbial starch degrading enzymes have a Starch Binding Domain (SBD) which has affinity fo

  10. Regulating multiple externalities

    DEFF Research Database (Denmark)

    Waldo, Staffan; Jensen, Frank; Nielsen, Max

    2016-01-01

    Open access is a well-known externality problem in fisheries causing excess capacity and overfishing. Due to global warming, externality problems from CO2 emissions have gained increased interest. With two externality problems, a first-best optimum can be achieved by using two regulatory instrume......Open access is a well-known externality problem in fisheries causing excess capacity and overfishing. Due to global warming, externality problems from CO2 emissions have gained increased interest. With two externality problems, a first-best optimum can be achieved by using two regulatory...

  11. Evaluation of granulated lactose as a carrier for DPI formulations 1: effect of granule size.

    Science.gov (United States)

    Du, Ping; Du, Ju; Smyth, Hugh D C

    2014-12-01

    The objective of this study was to investigate the effect of large granulated lactose carrier particle systems on aerosol performance of dry powder inhaler formulations. Granulated lactose carriers with average sizes ranging from 200 to 1,000 μm were prepared and subsequently fractionated into separate narrow size powders. The fractionated granulated lactose (GL) samples were characterized in terms of size, specific surface area, surface roughness, morphology, density, flowability, and solid-state. The in vitro aerosolization performance was performed on the different size fractions of GL samples from a commercial inhaler device (Aerolizer®) with a model formulation (2% w/w salbutamol sulfate). The cascade impaction parameters employed were 60 or 90 L/min with standard (aperture size, 0.6 mm) or modified piercing holes (aperture size, 1.2 mm) of the inhaler loaded capsules. It was shown that the largest size fraction formulation (850-1000 μm) had a slight improvement in the fine particle fraction (FPF) compared to immediately preceding size fractions, explained by a smaller adhesive force between drug and carrier. Compared to commercial piercing holes, enlarged piercing holes generated a slight decreasing trend of FPF as the lactose powder sizes increased from 200-250 μm to 600-850 μm, perhaps due to the reduced detachment force by flow forces. The size, surface roughness, density, and flowability of lactose carrier as well as device design all contributed to the aerosol dispersion performance of granulated lactose-based adhesive mixtures. It was concluded that poorer or enhanced redispersion performance is not an inherent property to the significantly large size of granulated lactose carriers as previously contended.

  12. Influence of process variable and physicochemical properties on the granulation mechanism of mannitol in a fluid bed top spray granulator.

    Science.gov (United States)

    Bouffard, Jonathan; Kaster, Meagan; Dumont, Hubert

    2005-10-01

    This study investigated the influence of specific process variables, including the hydroxypropyl cellulose (HPC) binder solution atomization, on the fluidized bed top spray granulation of mannitol. Special attention was given to the relationship between wetting and the granule growth profile. The atomization of the HPC binder solution using a binary nozzle arrangement produced droplets of decreasing size as the atomization pressure was increased, while changes in the spray rate had little effect on the mean droplet size. Increasing the HPC binder concentration from 2 to 8% w/w increased the binder droplet size and was most likely attributed to higher solution viscosity. The top spray granulation of mannitol showed induction type growth behavior. Process conditions like high spray rate, low fluidizing air velocity and binder solution concentration that promote the availability of HPC binder solution at the surface of the particles appeared to be key in enhancing nucleation and growth of the granules. Increasing the bed moisture level, up to a certain value, reduced the contribution of attrition to the overall growth profile of the granule and, more significantly, produced less granule breakage on drying. It was observed that the mean granule size could be reduced as much as 40% between the end of granulation and the end of drying for lower initial bed moisture level despite a shorter drying phase. High atomization pressure, especially when maintained during the drying phase, contributed substantially to granule breakage.

  13. Conditional knockout of tumor overexpressed gene in mouse neurons affects RNA granule assembly, granule translation, LTP and short term habituation.

    Directory of Open Access Journals (Sweden)

    Elisa Barbarese

    Full Text Available In neurons, specific RNAs are assembled into granules, which are translated in dendrites, however the functional consequences of granule assembly are not known. Tumor overexpressed gene (TOG is a granule-associated protein containing multiple binding sites for heterogeneous nuclear ribonucleoprotein (hnRNP A2, another granule component that recognizes cis-acting sequences called hnRNP A2 response elements (A2REs present in several granule RNAs. Translation in granules is sporadic, which is believed to reflect monosomal translation, with occasional bursts, which are believed to reflect polysomal translation. In this study, TOG expression was conditionally knocked out (TOG cKO in mouse hippocampal neurons using cre/lox technology. In TOG cKO cultured neurons granule assembly and bursty translation of activity-regulated cytoskeletal associated (ARC mRNA, an A2RE RNA, are disrupted. In TOG cKO brain slices synaptic sensitivity and long term potentiation (LTP are reduced. TOG cKO mice exhibit hyperactivity, perseveration and impaired short term habituation. These results suggest that in hippocampal neurons TOG is required for granule assembly, granule translation and synaptic plasticity, and affects behavior.

  14. ExternE National Implementation Finland

    Energy Technology Data Exchange (ETDEWEB)

    Pingoud, K.; Maelkki, H.; Wihersaari, M.; Pirilae, P. [VTT Energy, Espoo (Finland); Hongisto, M. [Imatran Voima Oy, Vantaa (Finland); Siitonen, S. [Ekono Energy Ltd, Espoo (Finland); Johansson, M. [Finnish Environment Institute, Helsinki (Finland)

    1999-07-01

    ExternE National Implementation is a continuation of the ExternE Project, funded in part by the European Commission's Joule III Programme. This study is the result of the ExternE National Implementation Project for Finland. Three fuel cycles were selected for the Finnish study: coal, peat and wood-derived biomass, which together are responsible for about 40% of total electricity generation in Finland and about 75% of the non-nuclear fuel based generation. The estimated external costs or damages were dominated by the global warming (GW) impacts in the coal and peat fuel cycles, but knowledge of the true GW impacts is still uncertain. From among other impacts that were valued in monetary terms the human health damages due to airborne emissions dominated in all the three fuel cycles. Monetary valuation for ecosystem impacts is not possible using the ExternE methodology at present. The Meri-Pori power station representing the coal fuel cycle is one of the world's cleanest and most efficient coal-fired power plants with a condensing turbine. The coal is imported mainly from Poland. The estimated health damages were about 4 mECU/kWh, crop damages an order of magnitude lower and damages caused to building materials two orders of magnitude lower. The power stations of the peat and biomass fuel cycles are of CHP type, generating electricity and heat for the district heating systems of two cities. Their fuels are of domestic origin. The estimated health damages allocated to electricity generation were about 5 and 6 mECU/kWh, respectively. The estimates were case-specific and thus an generalisation of the results to the whole electricity generation in Finland is unrealistic. Despite the uncertainties and limitations of the methodology, it is a promising tool in the comparison of similar kinds of fuel cycles, new power plants and pollution abatement technologies and different plant locations with each other. (orig.)

  15. Molecular, mesoscopic and microscopic structure evolution during amylase digestion of maize starch granules.

    Science.gov (United States)

    Shrestha, Ashok K; Blazek, Jaroslav; Flanagan, Bernadine M; Dhital, Sushil; Larroque, Oscar; Morell, Matthew K; Gilbert, Elliot P; Gidley, Michael J

    2012-09-01

    Cereal starch granules with high (>50%) amylose content are a promising source of nutritionally desirable resistant starch, i.e. starch that escapes digestion in the small intestine, but the structural features responsible are not fully understood. We report the effects of partial enzyme digestion of maize starch granules on amylopectin branch length profiles, double and single helix contents, gelatinisation properties, crystallinity and lamellar periodicity. Comparing results for three maize starches (27, 57, and 84% amylose) that differ in both structural features and amylase-sensitivity allows conclusions to be drawn concerning the rate-determining features operating under the digestion conditions used. All starches are found to be digested by a side-by-side mechanism in which there is no major preference during enzyme attack for amylopectin branch lengths, helix form, crystallinity or lamellar organisation. We conclude that the major factor controlling enzyme susceptibility is granule architecture, with shorter length scales not playing a major role as inferred from the largely invariant nature of numerous structural measures during the digestion process (XRD, NMR, SAXS, DSC, FACE). Results are consistent with digestion rates being controlled by restricted diffusion of enzymes within densely packed granular structures, with an effective surface area for enzyme attack determined by external dimensions (57 or 84% amylose - relatively slow) or internal channels and pores (27% amylose - relatively fast). Although the process of granule digestion is to a first approximation non-discriminatory with respect to structure at molecular and mesoscopic length scales, secondary effects noted include (i) partial crystallisation of V-type helices during digestion of 27% amylose starch, (ii) preferential hydrolysis of long amylopectin branches during the early stage hydrolysis of 27% and 57% but not 84% amylose starches, linked with disruption of lamellar repeating structure

  16. Drug distribution in wet granulation: foam versus spray.

    Science.gov (United States)

    Tan, Melvin X L; Nguyen, Thanh H; Hapgood, Karen P

    2013-09-01

    Foam granulation technology is a new wet granulation approach for pharmaceutical formulations. This study evaluates the performance of foam and spray granulation in achieving uniform drug distribution using a model formulation. To observe wetting and nuclei formation, single drop/foam penetration experiments were performed on a static powder bed comprised of varying compositions of hydrophilic/hydrophobic glass ballotini, and hydrophilic lactose/hydrophobic salicylic acid respectively. High shear granulation experiments were performed in a 5L mixer using varying compositions of hydrophilic lactose and hydrophobic salicylic acid. Four percent hydroxylpropyl methylcellulose (HPMC) solution was delivered at 90 g/min as either a foam (92% FQ) or an atomized spray whilst recording impeller power consumption. After drying, the granule size distribution was measured and the granule composition was estimated using gravimetric filtration in methanol. Foam penetration was less dependent on the powder hydrophobicity compared to drop penetration. For glass ballotini powder mixtures, foam induced nucleation created nuclei with relatively uniform structure and size regardless of the powder hydrophobicity. For salicylic acid and lactose mixtures, increasing the proportion of salicylic acid reduced the nuclei granule size for both foam and drop binder addition. The granule drug distribution was not significantly affected by the binder addition method. Processing conditions, including liquid binder amount, impeller speed, wet massing, and the wettability properties of the formulation were the dominant factors for delivering homogeneous granules. The study reveals that foam and spray granulation involve different nucleation mechanisms - spray tends to incur early liquid penetration whereas foam granulation operates well in mechanical dispersion.

  17. Wet Permeability Characteristics of Double-layer Knitted Fabrics

    Institute of Scientific and Technical Information of China (English)

    WANG Qi; XI Bai-jun

    2007-01-01

    In order to solve the problem that sweat flows back into the internal layer from the external layer in doublelayer knits, a fabric structure model is set up and the conditions that keep the sweat from flowing back into the internal layer from the external layer are presented. It can be used to improve the design of the double-layer knitstheoretically.

  18. Rheological and fractal hydrodynamics of aerobic granules.

    Science.gov (United States)

    Tijani, H I; Abdullah, N; Yuzir, A; Ujang, Zaini

    2015-06-01

    The structural and hydrodynamic features for granules were characterized using settling experiments, predefined mathematical simulations and ImageJ-particle analyses. This study describes the rheological characterization of these biologically immobilized aggregates under non-Newtonian flows. The second order dimensional analysis defined as D2=1.795 for native clusters and D2=1.099 for dewatered clusters and a characteristic three-dimensional fractal dimension of 2.46 depicts that these relatively porous and differentially permeable fractals had a structural configuration in close proximity with that described for a compact sphere formed via cluster-cluster aggregation. The three-dimensional fractal dimension calculated via settling-fractal correlation, U∝l(D) to characterize immobilized granules validates the quantitative measurements used for describing its structural integrity and aggregate complexity. These results suggest that scaling relationships based on fractal geometry are vital for quantifying the effects of different laminar conditions on the aggregates' morphology and characteristics such as density, porosity, and projected surface area.

  19. Microbial granulation for lactic acid production

    DEFF Research Database (Denmark)

    Kim, Dong-Hoon; Lee, Mo-Kwon; Hwang, Yuhoon

    2016-01-01

    was fed with 2% glucose and operated at a hydraulic retention time (HRT) of 12 h and pH 5.0 ± 0.1 under a thermophilic condition (50°C). The mixed liquor in the CSTR was then transferred to an up-flow anaerobic sludge blanket reactor (UASB). The fermentation performance and granulation process were......This work investigated the formation of microbial granules to boost the productivity of lactic acid (LA). The flocculated form of LA-producing microbial consortium, dominated by Lactobacillus sp. (91.5% of total sequence), was initially obtained in a continuous stirred-tank reactor (CSTR), which...... monitored with a gradual decrease of HRT from 8.0 to 0.17 h, corresponding to an increase in the substrate loading from 60 to 2,880 g glucose L−1d−1. As the operation continued, the accumulation of biomass in the UASB was clearly observed, which changed from flocculent to granular form with decrease in HRT...

  20. Surface field in an ensemble of superconducting spheres under external magnetic field

    CERN Document Server

    Peñaranda, A; Ramírez-Piscina, L

    1999-01-01

    We perform calculations of the magnetic field on the surface of an ensemble of superconducting spheres when placed into an external magnetic field, which is the configuration employed in superheated superconducting granule detectors. The Laplace equation is numerically solved with appropriate boundary conditions by means of an iterative procedure and a multipole expansion.

  1. ASH External Web Portal (External Portal) -

    Data.gov (United States)

    Department of Transportation — The ASH External Web Portal is a web-based portal that provides single sign-on functionality, making the web portal a single location from which to be authenticated...

  2. 21 CFR 520.970a - Flunixin meglumine granules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Flunixin meglumine granules. 520.970a Section 520...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.970a Flunixin meglumine granules. (a) Specifications. Each 10-gram packet contains flunixin meglumine equivalent to 250...

  3. Application of granulating of tires; Aplicaciones de granulado de NFUs

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez Justicia, A.

    2001-07-01

    At present, used tires are mainly used as fuel, retreading and granulating of tires. In this article. I will focus on the last option, talking about some of the multiple applications and going into detail of the making process of the granulation of used tires in a recycling plant. (Author)

  4. Cerebellar Granule Cells: Dense, Rich and Evolving Representations

    NARCIS (Netherlands)

    Badura, Aleksandra; De Zeeuw, Chris I

    2017-01-01

    For half a century it was assumed that granule cells use ultra-sparse encoding, but now in vivo calcium-imaging studies have shown that large ensembles of granule cells provide dense signals, which themselves evolve and adapt during training.

  5. Osseous drill holes to promote granulation tissue: Radiologic appearance

    Energy Technology Data Exchange (ETDEWEB)

    Resnik, C.S.; Reiner, B.I.; Diaconis, J.N. (Maryland Univ. Medical System/Hospital, Baltimore, MD (USA). Dept. of Radiology); Goldberg, N.H. (Maryland Univ. Medical System/Hospital, Baltimore, MD (USA). Div. of Plastic Surgery)

    1991-04-01

    Skin grafting following extensive soft-tissue loss is often delayed until adequate granulation tissue can be generated. Surgical drill holes into the marrow cavity promote development of granulation tissue. This article illustrates the radiology appearance of these drill holes in four patients. (orig.).

  6. Investigation of Compost Fertilizer Granulation Parameters Using Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    Y Ghasemi

    2015-03-01

    Full Text Available Nowadays compost fertilizers are suitable alternative to chemical fertilizers, due to the threats for human health and agriculture products. The most important problems for applying the compost fertilizer in the farm are: transportation (high volume, high moisture content, spreading problem, impurity such as dust and storage. To solve the problems mentioned, pressing process such as converting the compost to pellets and granules are suggested. In this research the effects of some granulation parameters on the percent of useful granules in a laboratory scale rotating drum was evaluated. The percentage of useful granules decreased by increasing the granulation time and increased by increasing the percentage of drum filling. The optimal conditions for granules production was achieved at drum rotational speed of 40.38 rpm, granulation time of 15 min, drum filling of 10% and molasse percentage of 40.97. According to these conditions, the response for useful granule was estimated as 81.6% with R2 of 0.924.

  7. Proteoglycans support proper granule formation in pancreatic acinar cells.

    Science.gov (United States)

    Aroso, Miguel; Agricola, Brigitte; Hacker, Christian; Schrader, Michael

    2015-10-01

    Zymogen granules (ZG) are specialized organelles in the exocrine pancreas which allow digestive enzyme storage and regulated secretion. The molecular mechanisms of their biogenesis and the sorting of zymogens are still incompletely understood. Here, we investigated the role of proteoglycans in granule formation and secretion of zymogens in pancreatic AR42J cells, an acinar model system. Cupromeronic Blue cytochemistry and biochemical studies revealed an association of proteoglycans primarily with the granule membrane. Removal of proteoglycans by carbonate treatment led to a loss of membrane curvature indicating a supportive role in the maintenance of membrane shape and stability. Chemical inhibition of proteoglycan synthesis impaired the formation of normal electron-dense granules in AR42J cells and resulted in the formation of unusually small granule structures. These structures still contained the zymogen carboxypeptidase, a cargo molecule of secretory granules, but migrated to lighter fractions after density gradient centrifugation. Furthermore, the basal secretion of amylase was increased in AR42J cells after inhibitor treatment. In addition, irregular-shaped granules appeared in pancreatic lobules. We conclude that the assembly of a proteoglycan scaffold at the ZG membrane is supporting efficient packaging of zymogens and the proper formation of stimulus-competent storage granules in acinar cells of the pancreas.

  8. Monetite granules versus particulate autologous bone in bone regeneration.

    Science.gov (United States)

    Torres, Jesús; Tamimi, Iskandar; Cabrejos-Azama, Jatsue; Tresguerres, Isabel; Alkhraisat, Mohammad; López-Cabarcos, Enrique; Hernández, Gonzalo; Tamimi, Faleh

    2015-07-01

    The aim of this study was to test bone tissue response to monetite granules in comparison with intramembranous autologous bone graft in a rabbit calvaria critical size defect model. Novel monetite granules were synthesized by thermal conversion of set brushite cement. Eight female New Zealand rabbits were used for this study. Two identical 10mm diameter bicortical cranial defects were created in each animal. One of the defects was grafted with monetite granules while the contralateral was grafted with granules of intramembranous autologous bone as control. Animals were sacrificed 8 weeks after surgery and biopsies were taken for histological and histomorphometrical evaluation under light microscopy. Wilcoxon test was used for statistical analysis. The bone defects treated with either autologous bone or monetite granules were able to heal within the study period. Upon histological observation the defects treated with autologous bone granules resembled the adjacent intact calvaria, whereas the defects treated with monetite showed a high infiltration of new bone and only 13.4±8.4% of remaining granules. The percentage of bone volume in the defects of the control group (71±9%) was 16% higher than in the study group (55±10%) (p0.05). The amount of augmented mineralized tissue in the bone defects obtained with monetite granules was not significantly different from that obtained with autologous bone. This study confirms the potential of monetite based biomaterials as an alternative to autologous bone graft. Copyright © 2015 Elsevier GmbH. All rights reserved.

  9. The Color of Lactotroph Secretory Granules Stained with FM1-43 Depends on Dye Concentration

    OpenAIRE

    Johnson, Joseph M.; Betz, William J.

    2007-01-01

    When pituitary lactotroph granules undergo exocytosis in the presence of FM1-43, their cores absorb dye and fluoresce brightly. We report that different granules fluoresce with different colors, despite being stained with a single fluorescent dye; emission spectra from individual granules show up to a 25 nm difference between the greenest and reddest granules. We found a correlation between granule color and average fluorescence intensity, suggesting that granule color depends upon dye concen...

  10. Understanding and predicting bed humidity in fluidized bed granulation.

    Science.gov (United States)

    Hu, Xinhui; Cunningham, John; Winstead, Denita

    2008-04-01

    Bed humidity is a critical parameter that needs to be controlled in a fluidized bed granulation to ensure reliability. To predict and control the bed humidity during the fluidized bed granulation process, a simple model based on the mass conservation of moisture was developed. The moisture mass balance model quantitatively simulates the effects of spray rate, binder solution concentration, airflow rate, inlet air temperature, and dew point on the bed humidity. The model was validated by a series of granulations performed in different scale granulators including Glatt GPCG-1, GPCG-15, and GPCG-60. Good agreement was observed between the theoretical prediction and the measured loss on drying (LOD). The model developed in the current work enables us to choose the appropriate parameters for the fluidized bed granulation and can be used as a valuable tool in process scaling-up.

  11. A Calculus on Granules from Rough Inclusions in Information Systems

    Institute of Scientific and Technical Information of China (English)

    Lech Polkowski

    2006-01-01

    Indiscernibility relations induced in information systems in the sense of Pawlak,define granules of knowledge as unions of their equivalence classes,leading to regular structures like Boolean algebras. Apart from Boolean operations on granules, under afixed set of attributes,that induce the partition topology on their collection, one may search for more flexible schemes that would induce in collections of granules some non-trivial topologies and in particular quasi-metrics on granules, allowing for richer structures. A way of realization of this program has been proposed as the paradigm of rough mereology; although abstract, stemming from an alternative set theory, yet it offers a calculus based on kind of quasi-metrics that allows for discussing granules from the point of view of their closeness. In thiswork, we would liketopresent theideas of this approach and basic results with short discussion of applications.

  12. A Granulation "Flicker"-based Measure of Stellar Surface Gravity

    CERN Document Server

    Bastien, Fabienne A; Basri, Gibor; Pepper, Joshua

    2015-01-01

    In Bastien et al. (2013) we found that high quality light curves, such as those obtained by Kepler, may be used to measure stellar surface gravity via granulation-driven light curve "flicker". Here, we update and extend the relation originally presented in Bastien et al. (2013) after calibrating flicker against a more robust set of asteroseismically derived surface gravities. We describe in detail how we extract the flicker signal from the light curves, including how we treat phenomena, such as exoplanet transits and shot noise, that adversely affect the measurement of flicker. We examine the limitations of the technique, and, as a result, we now provide an updated treatment of the flicker-based logg error. We briefly highlight further applications of the technique, such as astrodensity profiling or its use in other types of stars with convective outer layers. We discuss potential uses in current and upcoming space-based photometric missions. Finally, we supply flicker-based logg values, and their uncertainti...

  13. Ontogeny of calbindin immunoreactivity in the human hippocampal formation with a special emphasis on granule cells of the dentate gyrus.

    Science.gov (United States)

    Abrahám, Hajnalka; Veszprémi, Béla; Kravják, András; Kovács, Krisztina; Gömöri, Eva; Seress, László

    2009-04-01

    Calbindin (CB) is a calcium-binding protein that is present in principal cells as well as in interneurons of the hippocampal formation of various species including humans. Studies with transgenic mice revealed that CB is essential for long-term potentiation and synaptic plasticity which are the cellular basis of learning and memory. In a previous study we have shown that CB expression in granule cells of the dentate gyrus correlates with the functional maturation of the hippocampal formation in the rat. In the present study we examined the ontogeny of CB using immunohistochemistry in the human hippocampal formation paying special attention to the granule cells of the dentate gyrus. As early as the 14(th) week of gestation (GW), CB was being expressed by pyramidal cells of CA1-3 regions in the deepest cell rows of the pyramidal layer towards the ventricular zone. Later, CB sequentially appears in more superficial cell rows. After midgestation, CB disappears from CA3 pyramidal neurons. Expression of CB by granule cells starts at the 22(nd)-23(rd) GW, first by the most superficial neurons of the ectal end of the dorsal blade. At the 24(th) GW, CB is expressed by granule cells of the crest and medial portion of the ventral blade whereas later the entire ventral blade revealed CB immunoreactivity. At term, and in the first few postnatal months, CB-immunoreaction is detected in granule cells of both blades except for those neurons in the deepest cell rows at the hilar border. At around 2-3 years of age, all granule cells of the entire cell layer are CB-immunoreactive. Axons of granule cells, the mossy fibers, start to express CB around the 30(th) GW in stratum lucidum of CA3a. With further development, CB is expressed in CA3b and c, as well as in the hilus. An adult-like pattern of CB-immunoreactivity could be observed at 11 years of age. Our results indicate that (i) CB is expressed by hippocampal pyramidal cells a few weeks before midgestation; (ii) similarly to

  14. Solar granulation from photosphere to low chromosphere observed in BaII 4554 A line

    CERN Document Server

    Kostik, R; Shchukina, N

    2009-01-01

    The purpose of this paper is to characterize the statistical properties of solar granulation in the photosphere and low chromosphere up to 650 km. We use velocity and intensity variations obtained at different atmospheric heights from observations in BaII 4554 A. The observations were done during good seeing conditions at the VTT at the Observatorio del Teide on Tenerife. The line core forms rather high in the atmosphere and allows granulation properties to be studied at heights that have been not accessed before in similar studies. In addition, we analyze the synthetic profiles of the BaII 4554 A line by the same method computed taking NLTE effects into account in the 3D hydrodynamical model atmosphere. We suggest a 16-column model of solar granulation depending on the direction of motion and on the intensity contrast measured in the continuum and in the uppermost layer. We calculate the heights of intensity contrast sign reversal and velocity sign reversal. We show that both parameters depend strongly on th...

  15. Hilar mossy cell circuitry controlling dentate granule cell excitability

    Directory of Open Access Journals (Sweden)

    Seiichiro eJinde

    2013-02-01

    Full Text Available Glutamatergic hilar mossy cells of the dentate gyrus can either excite or inhibit distant granule cells, depending on whether their direct excitatory projections to granule cells or their projections to local inhibitory interneurons dominate. However, it remains controversial whether the net effect of mossy cell loss is granule cell excitation or inhibition. Clarifying this controversy has particular relevance to temporal lobe epilepsy, which is marked by dentate granule cell hyperexcitability and extensive loss of dentate hilar mossy cells. Two diametrically opposed hypotheses have been advanced to explain this granule cell hyperexcitability – the dormant basket cell and the irritable mossy cell hypotheses. The dormant basket cell hypothesis proposes that mossy cells normally exert a net inhibitory effect on granule cells and therefore their loss causes dentate granule cell hyperexcitability. The irritable mossy cell hypothesis takes the opposite view that mossy cells normally excite granule cells and that the surviving mossy cells in epilepsy increase their activity, causing granule cell excitation. The inability to eliminate mossy cells selectively has made it difficult to test these two opposing hypotheses. To this end, we developed a transgenic toxin-mediated, mossy cell-ablation mouse line. Using these mutants, we demonstrated that the extensive elimination of hilar mossy cells causes granule cell hyperexcitability, although the mossy cell loss observed appeared insufficient to cause clinical epilepsy. In this review, we focus on this topic and also suggest that different interneuron populations may mediate mossy cell-induced translamellar lateral inhibition and intralamellar recurrent inhibition. These unique local circuits in the dentate hilar region may be centrally involved in the functional organization of the dentate gyrus.

  16. A highly sustainable and versatile granulation method of nanodrugs via their electrostatic adsorption onto chitosan microparticles as the granulation substrates.

    Science.gov (United States)

    Yang, Yue; Hadinoto, Kunn

    2013-08-16

    Nanodrugs play important roles in enhancing the sustainability of pharmaceutical manufacturing via their ability to enhance the bioavailability of poorly soluble drugs, resulting in less drug wastage and less mass/energy consumed in their manufacturing. Despite their sustainability enhancement capability, solid dosage form manufacturing of nanodrugs remains lacking from the sustainability perspective. One example is the granulation of nanodrugs prior to tablet preparation, where existing methods (e.g. wet granulation, spray granulation, spray drying) require high energy and time expenses, or are highly intricate often leading to product inconsistencies. Herein we present an alternative nanodrug granulation method via electrostatic adsorption of the nanodrugs onto chitosan microparticles acting as granulation substrates. The method is sustainable involving only mixing of aqueous suspensions of the nanodrugs and substrates under ambient conditions, followed by washing and drying. We investigate the effects of substrate's physical characteristics and nanodrug to substrate ratio on the nanodrug loading in the granules, content uniformity, nanodrug recovery, and granule flowability. Ciprofloxacin and curcumin nanoplexes prepared by drug-polyelectrolyte complexation are used as the model nanodrugs with neutrally, positively, and negatively charged chitosan microparticles as the substrates. Granules having 25% (w/w) nanodrug loading at 50% (w/w) recovery with good flowability have been successfully prepared. Copyright © 2013 Elsevier B.V. All rights reserved.

  17. Fluidization of Wet Granulates under Hydrodynamic Shear

    CERN Document Server

    Battiato, I

    2012-01-01

    We investigate the fluidization threshold of three-dimensional cohesive granulates under hydrodynamic shear forces exerted by a creeping ow. A continuum model of flow through porous media provides an analytical expression for the average drag force on a single grain. The balance equation for the forces and a force propagation model are then used to investigate the effects of porosity and packing structure on the stability of the pile. We obtain a closed-form expression for the fluidization threshold of a regular packing of mono-disperse frictionless cohesive spherical grains in a planar fracture. The compound effect of structural (packing orientation and porosity) and dynamical properties of the system on its stability is quantified.

  18. Cerebellar granule cells are predominantly generated by terminal symmetric divisions of granule cell precursors.

    Science.gov (United States)

    Nakashima, Kie; Umeshima, Hiroki; Kengaku, Mineko

    2015-06-01

    Neurons in the central nervous system (CNS) are generated by symmetric and asymmetric cell division of neural stem cells and their derivative progenitor cells. Cerebellar granule cells are the most abundant neurons in the CNS, and are generated by intensive cell division of granule cell precursors (GCPs) during postnatal development. Dysregulation of GCP cell cycle is causal for some subtypes of medulloblastoma. However, the details and mechanisms underlying neurogenesis from GCPs are not well understood. Using long-term live-cell imaging of proliferating GCPs transfected with a fluorescent newborn-granule cell marker, we found that GCPs underwent predominantly symmetric divisions, generating two GCPs or two neurons, while asymmetric divisions generating a GCP and a neuron were only occasionally observed, in both dissociated culture and within tissues of isolated cerebellar lobules. We found no significant difference in cell cycle length between proliferative and neurogenic divisions, or any consistent changes in cell cycle length during repeated proliferative division. Unlike neural stem cells in the cerebral cortex and spinal cord, which generate many neurons by repeated asymmetric division, cerebellar GCPs produce neurons predominantly by terminal symmetric division. These results indicate diverse mechanisms of neurogenesis in the mammalian brain. © 2015 Wiley Periodicals, Inc.

  19. A Granule Model for Evaluating Adhesion of Pharmaceutical Binders

    Directory of Open Access Journals (Sweden)

    Hossein Orafai

    2003-10-01

    Full Text Available Granule capability is defined in terms of the strength of individual granule and friability of granulation batch to withstand breaking, abrasion and compactibility. Binder(s are added to perform the above properties .The common methods to asses their capability are to test crushing strength of the granules directly and to make statistical analysis and /or testing the friability of bulk granulation. In this work four substrate models including polymethylmetacrylate beads(PMMA,glass powder, acetaminophen, and para-aminobebzoic acid were chosen. The binder models were corn starch, gelatin, methylcellulose (MC and hydroxypropylmethylcellulose (HPMC. After massing the substrates with the binder solutions, discs were produced by the mean of the mold technique. The discs were dried and conditioned and then tested for tensile strength while the failed areas were scanned by SEM. Various granulations were made and the results of friability and crush strength were compared with the discs strength .The bond areas in the SEM showed the trend with the binder concentration .A comparison of the standard deviation shows that discs have much lower level of the strength than granules. The resulting discs showed a higher performance which is related to the stems for the discs shape .In conclusion, this method is a simple and is applicable to differentiate efficacy of binder under studies.

  20. Optimization for blast furnace slag dry cooling granulation device

    Science.gov (United States)

    Dazhan, Sheng; Yali, Wang; Ruiyun, Wang; Suping, Cui; Xiaoyu, Ma

    2017-03-01

    Since the large accumulation amount of blast furnace slag (BFS) with recycling value, it has become a hot topic for recovery utilization. Compared with the existing various BFS granulation process, the dry granulation process can promote the use of blast furnace granulated slag as cement substitute and concrete admixtures. Our research group developed a novel dry cooling granulation experiment device to treat BFS. However, there are still some problems to be solved. The purpose of this research is to improve the cooling and granulation efficiency of the existing dry type cooling equipment. This topic uses the FLUENT simulation software to study the impact of the number of air inlet on the cooling effect of the device. The simulation result is that the device possessing eight air inlets can increase the number of hot and cold gas exchanged, resulting in a better cooling effect. According to the power consumption, LCA analysis was carried out on the cooling granulation process. The results show that the device equipped eight air inlets not only improved the original equipment cooling granulation effect, but also increased resource utilization ratio, realized energy-saving and emission reduction.

  1. UNCERTAINTY HANDLING IN DISASTER MANAGEMENT USING HIERARCHICAL ROUGH SET GRANULATION

    Directory of Open Access Journals (Sweden)

    H. Sheikhian

    2015-08-01

    Full Text Available Uncertainty is one of the main concerns in geospatial data analysis. It affects different parts of decision making based on such data. In this paper, a new methodology to handle uncertainty for multi-criteria decision making problems is proposed. It integrates hierarchical rough granulation and rule extraction to build an accurate classifier. Rough granulation provides information granules with a detailed quality assessment. The granules are the basis for the rule extraction in granular computing, which applies quality measures on the rules to obtain the best set of classification rules. The proposed methodology is applied to assess seismic physical vulnerability in Tehran. Six effective criteria reflecting building age, height and material, topographic slope and earthquake intensity of the North Tehran fault have been tested. The criteria were discretized and the data set was granulated using a hierarchical rough method, where the best describing granules are determined according to the quality measures. The granules are fed into the granular computing algorithm resulting in classification rules that provide the highest prediction quality. This detailed uncertainty management resulted in 84% accuracy in prediction in a training data set. It was applied next to the whole study area to obtain the seismic vulnerability map of Tehran. A sensitivity analysis proved that earthquake intensity is the most effective criterion in the seismic vulnerability assessment of Tehran.

  2. The Leader Protein of Cardioviruses Inhibits Stress Granule Assembly ▿

    Science.gov (United States)

    Borghese, Fabian; Michiels, Thomas

    2011-01-01

    Stress granules (SG) are cytoplasmic aggregates of stalled translation preinitiation complexes that form in cells exposed to various environmental stresses. Here, we show that stress granules assemble in cells infected with Theiler's murine encephalomyelitis virus (TMEV) mutants carrying alterations in the leader (L) protein, but not in cells infected with wild-type TMEV. Stress granules also formed in STAT1-deficient cells, suggesting that SG formation was not a consequence of increased type I interferon (IFN) production when cells were infected with the mutant virus. Ectopic expression of the wild-type L protein was sufficient to inhibit stress granule formation induced by sodium arsenite or thapsigargin treatment. In conclusion, TMEV infection induces stress granule assembly, but this process is inhibited by the L protein. Unlike poliovirus-induced stress granules, TMEV-induced stress granules did not contain the nuclear protein Sam68 but contained polypyrimidine tract binding protein (PTB), an internal ribosome entry site (IRES)-interacting protein. Moreover, G3BP was not degraded and was found in SG after TMEV infection, suggesting that SG content could be virus specific. Despite the colocalization of PTB with SG and the known interaction of PTB with viral RNA, in situ hybridization and immunofluorescence assays failed to detect viral RNA trapped in infection-induced SG. Recombinant Theiler's viruses expressing the L protein of Saffold virus 2 (SAFV-2), a closely related human theilovirus, or the L protein of mengovirus, an encephalomyocarditis virus (EMCV) strain, also inhibited infection-induced stress granule assembly, suggesting that stress granule antagonism is a common feature of cardiovirus L proteins. PMID:21752908

  3. The leader protein of cardioviruses inhibits stress granule assembly.

    Science.gov (United States)

    Borghese, Fabian; Michiels, Thomas

    2011-09-01

    Stress granules (SG) are cytoplasmic aggregates of stalled translation preinitiation complexes that form in cells exposed to various environmental stresses. Here, we show that stress granules assemble in cells infected with Theiler's murine encephalomyelitis virus (TMEV) mutants carrying alterations in the leader (L) protein, but not in cells infected with wild-type TMEV. Stress granules also formed in STAT1-deficient cells, suggesting that SG formation was not a consequence of increased type I interferon (IFN) production when cells were infected with the mutant virus. Ectopic expression of the wild-type L protein was sufficient to inhibit stress granule formation induced by sodium arsenite or thapsigargin treatment. In conclusion, TMEV infection induces stress granule assembly, but this process is inhibited by the L protein. Unlike poliovirus-induced stress granules, TMEV-induced stress granules did not contain the nuclear protein Sam68 but contained polypyrimidine tract binding protein (PTB), an internal ribosome entry site (IRES)-interacting protein. Moreover, G3BP was not degraded and was found in SG after TMEV infection, suggesting that SG content could be virus specific. Despite the colocalization of PTB with SG and the known interaction of PTB with viral RNA, in situ hybridization and immunofluorescence assays failed to detect viral RNA trapped in infection-induced SG. Recombinant Theiler's viruses expressing the L protein of Saffold virus 2 (SAFV-2), a closely related human theilovirus, or the L protein of mengovirus, an encephalomyocarditis virus (EMCV) strain, also inhibited infection-induced stress granule assembly, suggesting that stress granule antagonism is a common feature of cardiovirus L proteins.

  4. External radiation surveillance

    Energy Technology Data Exchange (ETDEWEB)

    Antonio, E.J.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report describes how external radiation was measured, how surveys were performed, and the results of these measurements and surveys. External radiation exposure rates were measured at locations on and off the Hanford Site using thermoluminescent dosimeters (TLD). External radiation and contamination surveys were also performed with portable radiation survey instruments at locations on and around the Hanford Site.

  5. Zinc sulfide in intestinal cell granules of Ancylostoma caninum adults

    Energy Technology Data Exchange (ETDEWEB)

    Gianotti, A.J.; Clark, D.T.; Dash, J. (Portland State Univ., OR (USA))

    1991-04-01

    A source of confusion has existed since the turn of the century about the reddish brown, weakly birefringent 'sphaerocrystals' located in the intestines of strongyle nematodes, Strongylus and Ancylostoma. X-ray diffraction and energy dispersive spectrometric analyses were used for accurate determination of the crystalline order and elemental composition of the granules in the canine hookworm Ancylostoma caninum. The composition of the intestinal pigmented granules was identified unequivocally as zinc sulfide. It seems most probable that the granules serve to detoxify high levels of metallic ions (specifically zinc) present due to the large intake of host blood.

  6. New formulations on the finite element method for boundary value problems with internal/external boundary layers; Novas formulacoes de elementos finitos para problemas de valor de contorno com camadas limite interna/externa

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Luis Carlos Martins

    1998-06-15

    New Petrov-Galerkin formulations on the finite element methods for convection-diffusion problems with boundary layers are presented. Such formulations are based on a consistent new theory on discontinuous finite element methods. Existence and uniqueness of solutions for these problems in the new finite element spaces are demonstrated. Some numerical experiments shows how the new formulation operate and also their efficacy. (author)

  7. Influence of pore water velocity on the release of carbofuran and fenamiphos from commercial granulates embedded in a porous matrix

    Science.gov (United States)

    Paradelo, Marcos; Pérez-Rodríguez, Paula; Arias-Estévez, Manuel; López-Periago, J. Eugenio

    2012-11-01

    Pore water flow velocity can influence the processes involved in the contaminant transport between relative stagnant zones of porous media and their adjacent mobile zones. A particular case of special interest is the occurrence of high flow rates around the controlled release granules containing pesticides buried in soil. The release of the pesticides carbofuran and fenamiphos from commercial controlled release formulations (CRFs) was studied, comparing release tests in a finite volume of water with water flow release tests in saturated packed sand at different seepage velocities. For water release kinetics, the time taken for 50% of the pesticide to be released (T50) was 0.64 hours for carbofuran and 1.97 hours for fenamiphos. In general, the release rate was lower in the porous matrix than in the free water tests. The faster release rate for carbofuran was attributed to its higher water diffusivity. The seepage velocity has a strong influence on the pesticide release rate. The dominant release mechanism varies with the progress of release. The evolution of the mechanism is discussed on the basis of the successive steps that involve the moving boundary of the dissolution front of the pesticide inside the granule, the concentration gradient inside the granule and the flow boundary layer resistance to solute diffusion around the granule. The pore water velocity influences the overall release dynamics. Therefore, seepage velocity should be considered in pesticide release to evaluate the risk of pesticide leaching, especially in scenarios with fast infiltration.

  8. Correlation between microbial community and granule conductivity in anaerobic bioreactors for brewery wastewater treatment

    DEFF Research Database (Denmark)

    Shrestha, Pravin; Malvankar, Nikhil S.; Werner, Jeffrey

    2014-01-01

    granules from an aerobic bioreactor designed for phosphate removal were not. There was a moderate correlation (r = 0.67) between the abundance of Geobacter species in the UASB granules and granule conductivity, suggesting that Geobacter contributed to granule conductivity. These results, coupled...

  9. Phase transition time delays in irradiated superheated superconducting granules

    CERN Document Server

    Abplanalp, M; Czapek, G; Diggelmann, U; Furlan, M; Gabutti, A; Janos, S; Moser, U; Pozzi, R; Pretzl, Klaus P; Schmiemann, K; Perret-Gallix, D; Van den Brandt, B; Konter, J A; Mango, S

    1994-01-01

    The time difference between a particle interaction in a Superheated Superconducting Granule (SSG) and the resulting phase transition signal has been explored. Detectors containing Zn and Sn SSG were irradiated with neutrons and protons to study the heating mechanism taking place in nuclear recoil and ionizing events. Scattered neutrons have been detected by a scintillator hodoscope behind the SSG with a recoil energy measurement resolution of 10\\% and an interaction time resolution of 1ns. The fast transition of the metastable granules allowed to determine the elapsed time between an energy deposition and the phase transition signal. In the case of Sn granules, the results show that the time distributions are narrow and independent of the deposited energy in nuclear recoil and ionizing events. In Zn, however, the time distributions are much broader and depend on the energy deposition in the granule.

  10. Treatment of hyper-granulated limb wounds in horses

    Directory of Open Access Journals (Sweden)

    O. A. Bader

    2011-01-01

    Full Text Available This study was performed to investigate the different methods of treating hyper granulation tissue on experimentally induced wounds in equine limbs. Wounds were induced by removal of a skin patch and subcutaneous tissue for about 5-7 cm width and 6-8 cm in length from the dorsal and lateral aspect of the fore and hind limbs below the carpal and tarsal joints. The wounds were left open without treatment and the animals were trained 2-2.5 hours every day for about 3-5 weeks until hyper granulation tissue was developed. The schedule for the treatment of hyper granulation was divided into five groups each contained eight wounds of hyper granulation tissue; each main group was divided into two subgroups. The subgroups of first, second, third, fourth and fifth groups were treated by the following schedules: bandage alone; copper sulphate ointment 10%; silver nitrate ointment 2%; red mercury ointment 11%; and laser therapy (at a total dose of 9.72 Joule / cm2 respectively. While the second subgroups were treated by surgical resection of the hyper granulation tissue, followed by the same treatments applied on the first subgroup. The bandage for all experimental groups was changed every 48 hours until healing was occurred. The clinical and histological observation of the first group revealed that the healing take long period comparing with other groups. The mean of wound healing were 65 days in non surgical removal of hyper granulation tissue subgroup, while 57 days in surgical removed of hyper granulation tissue subgroup. The results of the second, third, fourth groups revealed that the caustic material especially red mercury has a role in healing processes through depressing the hyper granulation tissue. The mean of wound healing of the second group was 42.25 days in non surgical removal of hyper granulation tissue subgroup while 37.25 days in surgically removed hyper granulation tissue subgroup. In the third group the mean of wound healing was 45

  11. Heterogeneity of secretory granules of silent pituitary adenomas

    DEFF Research Database (Denmark)

    Holck, S; Wewer, U M; Albrechtsen, R

    1988-01-01

    Silent pituitary adenomas were compared with hormonally active tumors taking into account the size, number, and ultrastructural characteristics of secretory granules (SG). The study group (a total of 79 primary pituitary adenomas) comprised 27 silent, 21 growth hormone (GH)-producing-, 16 prolactin...... (PRL)-producing-, 5 GH-PRL-producing- and 10 adrenocorticotropic hormone (ACTH)-producing adenomas. The SG of silent adenomas were significantly smaller than SG in endocrine active adenomas. All hormonally inactive tumors also contained small (mean, 94 nm) specific cytoplasmic granules, designated...... approximately 10 to 50% of the granules in each cell. These granules were not seen in hormonally active tumors and considered therefore diagnostic of silent pituitary adenomas....

  12. In vitro binding of puroindolines to wheat starch granules

    DEFF Research Database (Denmark)

    Sørensen, Helle Aagaard; Darlington, H.F.; Shewry, P.R.

    2001-01-01

    Puroindoline (pin) preparations made from flours of hard and soft wheats contained a mixture of pin-a, 0.19/0.53 alpha -amylase inhibitor, and purothionins. Starch granule preparations from the same cultivars were treated with proteinase to remove surface proteins and incubated with solutions...... of the pin preparations. Binding of pin-a and purothionins but not the 0.19/0.53 inhibitor was observed with no apparent differences between the behavior of the pin preparations or starch granule preparations from hard or soft types. No binding was observed when several other proteins (bovine serum albumin......, total albumins, a commercial preparation of wheat alpha -amylase inhibitors, and barley beta -amylase) were incubated with the starch granules under the same conditions, indicating that in vitro binding can be used to study specific starch granule and protein interactions....

  13. Development of granules from Phyllanthus niruri spray-dried extract

    Directory of Open Access Journals (Sweden)

    Tatiane Pereira de Souza

    2009-12-01

    Full Text Available The aim of this study was to develop granules from Phyllanthus niruri spray-dried extract using dry and wet granulation and to assess techniques to enable the production of granules with improved technological characteristics and yields. Granules were characterized by granulometry, reological parameters, compression and hygroscopic behavior. Independent of the granulation technique, technologically developed granules presented particle diameter, bulk and tapped densities and compressibility indexes suitable for a solid dosage form. The compression behavior showed plastic and fragmentary deformation for granules produced by the dry granulation technique and predominantly plastic deformation for wet granulation. Concerning the humidity sorption, the study showed that granules absorb less humidity than the spray-dried extract. However, granules with Eudragit® E 100 were the least hygroscopic.O objetivo deste estudo foi desenvolver grânulos de extrato Phyllantus niruri seco por aspersão e por granulação úmida e avaliar técnicas que possibilitem a produção de grânulos com características tecnológicas e rendimentos aperfeiçoados. Os grânulos foram caracterizados por granulometria, parâmetros reológicos, compressão e comportamento higroscópico. Independentemente da técnica de granulação, os grânulos tecnologicamente desenvolvidos apresentaram diâmetro de partículas, densidades aparente e compactada e índices de compressibilidade adequados para a formulação sólida. O comportamento de compressão mostrou deformação plástica e elástica para os grânulos produzidos por técnicas de granulação seca e, predominantemente, deformação plástica para a granulação úmida. Com relação à absorção da umidade, o estudo mostrou que os grânulos absorvem menos umidade do que o extrato seco por aspersão. Entretanto, os grânulos com Eudragit E 100 foram os menos higroscópicos.

  14. STUDY ON SPANNING EXTERNAL FIXATORS FOR PERIARTICULAR OPEN FRACTURES

    Directory of Open Access Journals (Sweden)

    Prasanth Maddila

    2017-04-01

    Full Text Available BACKGROUND Open fractures which occur close to any fracture need immobilisation for the soft tissues to heal. Some open fractures are even fixed with provisional fixations to maintain the alignment of the fractures. The provisional fixation needs to be augmented with external support, which can be given by spanning external fixators across a joint. MATERIALS AND METHODS Our study consists of 38 open fractures of the lower limbs, which are of Gustilo-Anderson’s type IIIB, an MT4 of AO-ASIF soft tissue injury classification essentially requiring open wound management as well as fracture fixation. Wound lavage and debridements are carried out till the soft tissues show granulations. The position in which joint is immobilised is functional and with access to open wound for dressings and inspection without any displacement of the fracture as well as creeping granulation tissue. RESULTS All the cases in our study are maintained with functional position till soft tissue cover is achieved and provisional fixation is done with definitive fixation after soft tissue cover with skin grafting. CONCLUSION Spanning external fixators are useful in maintaining functional positions as well as augmenting the provisional fixation of the compound fractures.

  15. Giant arachnoid granulation mimicking dural sinus thrombosis.

    Science.gov (United States)

    Ayaz, Ercan; Atalay, Basak; Baysal, Begumhan; Senturk, Senem; Aslan, Ahmet

    2017-01-01

    Arachnoid granulations (AG) are composed of dense, collagenous connective tissue that includes clusters of arachnoid cells. They tend to invaginate into the dural sinuses, through which cerebrospinal fluid enters the venous system. AG are most commonly seen at the junction between the middle and lateral thirds of the transverse sinuses near the entry sites of the superficial veins. Presently described is the case of a 21-year-old female who presented at the clinic with recurrent headaches. Magnetic resonance (MR) imaging revealed a 3.5-cm lesion, which extended from confluens sinuum through the superior sagittal sinus. The lesion had created a scallop-shaped area of erosion in the neighboring occipital bone. To exclude sinus thrombosis, MR venography was performed, which displayed a maintained venous flow around the lesion. Headaches were treated symptomatically with medical therapy. Giant AG can be misdiagnosed as dural sinus thrombosis. MR imaging combined with MR venography is the most useful diagnostic tool to differentiate giant AG from dural sinus thrombosis.

  16. Brain Herniation into Giant Arachnoid Granulation: An Unusual Case

    Science.gov (United States)

    Santos, Gonçalo Roque

    2017-01-01

    Arachnoid granulations are structures filled with cerebrospinal fluid (CSF) that extend into the venous sinuses through openings in the dura mater and allow the drainage of CSF from subarachnoid space into venous system. Usually they are asymptomatic but can be symptomatic when large enough to cause sinus occlusion. We report a rare case of a brain herniation into a giant arachnoid granulation in an asymptomatic elderly male patient, which was discovered incidentally. PMID:28392955

  17. Preparation of Glass Ceramic Based on Granulated Slag and Cullet

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The glass-ceramic was prepared on the basis of materials of granulated slag containing high-calcium oxide and cullet.The content of granulated slag ranges from 50%-60%wt in the glass compositions. The samples were analyzed by DTA, SEM and XRD.The results show that the main crystal phase of the glass-ceramic is β-CaSiO3,Which is in scattering fiber or column form.The applying properties have also been measured.

  18. Preventive effect of Ganfujian granule on experimental hepatocarcinoma in rats

    Institute of Scientific and Technical Information of China (English)

    Yan Qian; Chang-Quan Ling

    2004-01-01

    AIM: To investigate the inhibitory effect of dietary and medicinal formula Ganfujian granule on diethylnitrosamine (DEN)-induced hepatocarcinoma in rats.METHODS: Male SD rats had free access to water containing 0.1 g/L DEN for 16 weeks, during which the rats fed with standard diet or administration of Ganfujian granule (30.4 g/Kg in diet). At weeks 4, 8, 12 and 16 of hepatocarcinogenesis 5 rats of each group were sacrificed, and at week 20 another 30 rats were sacrificed from each group. The end point for survival observation was at week 28.Immunochemistry methods were used to examine the effect of Ganfujian granule on the process of hepatocarcinogenesis including proliferation of hepatocytes and cell cycle modulation.RESULTS: Ganfujian granule could reduce and delay the incidence of hepatocarcinoma in rats and prolong the survival of animals. In addition, Ganfujian granule had a marked inhibitory effect on high expression of cyclin dependent kinase (CDK4) during the whole process of hepatocarcinogenesis and cyclin D1 at week 16 and the number of proliferating cell nuclear antigen (PCNA) positive cells in different stages of hepatocarcinogenesis.CONCLUSION: Ganfujian granule can reduce and delay the incidence of hepatocarcinoma in rats by exerting direct or indirect effects on cell cycle and inhibiting uncontrolled proliferation of hepatocytes.

  19. Pasireotide: successful treatment of a sparsely granulated tumour in a resistant case of acromegaly

    Directory of Open Access Journals (Sweden)

    W K M G Amarawardena

    2017-07-01

    Full Text Available The granulation pattern of somatotroph adenomas is well known to be associated with differing clinical and biochemical characteristics, and it has been shown that sparsely granulated tumours respond poorly to commonly used somatostatin receptor ligands (SRLs. We report a challenging case of acromegaly with a sparsely granulated tumour resistant to multiple modalities of treatment, ultimately achieving biochemical control with pasireotide. A 26-year-old lady presented with classical features of acromegaly, which was confirmed by an oral glucose tolerance test. Insulin-like growth factor 1 (IGF1 was 1710 μg/L (103–310 μg/L and mean growth hormone (GH was >600 U/L. MRI scan showed a 4 cm pituitary macroadenoma with suprasellar extension and right-sided cavernous sinus invasion. She underwent trans-sphenoidal pituitary surgery. Histology displayed moderate amounts of sparsely granular eosinophilic cytoplasm, staining only for GH. Postoperative investigations showed uncontrolled disease (IGF1:1474 μg/L, mean GH:228 U/L and residual tumour in the cavernous sinus. She received external beam fractionated radiation. Over the years, she received octreotide LAR (up to 30 mg, lanreotide (up to 120 mg two weekly, cabergoline, pegvisomant and stereotactic radiosurgery to no avail. Only pegvisomant resulted in an element of disease control; however, this had to be stopped due to abnormal liver function tests. Fifteen years after the diagnosis, she was started on pasireotide 40 mg monthly. Within a month, her IGF1 dropped and has remained within the normal range (103–310 μg/L. Pasireotide has been well tolerated, and there has been significant clinical improvement. Somatostatin receptor subtyping revealed a positivity score of two for both sst5 and sst2a subtypes.

  20. The origin of the reversed granulation in the solar photosphere

    Science.gov (United States)

    Cheung, M. C. M.; Schüssler, M.; Moreno-Insertis, F.

    2007-01-01

    Aims:We study the structure and reveal the physical nature of the reversed granulation pattern in the solar photosphere by means of 3-dimensional radiative hydrodynamics simulations. Methods: We used the MURaM code to obtain a realistic model of the near-surface layers of the convection zone and the photosphere. Results: The pattern of horizontal temperature fluctuations at the base of the photosphere consists of relatively hot granular cells bounded by the cooler intergranular downflow network. With increasing height in the photosphere, the amplitude of the temperature fluctuations diminishes. At a height of z=130-140 km in the photosphere, the pattern of horizontal temperature fluctuations reverses so that granular regions become relatively cool compared to the intergranular network. Detailed analysis of the trajectories of fluid elements through the photosphere reveal that the motion of the fluid is non-adiabatic, owing to strong radiative cooling when approaching the surface of optical depth unity followed by reheating by the radiation field from below. The temperature structure of the photosphere results from the competition between expansion of rising fluid elements and radiative heating. The former acts to lower the temperature of the fluid whereas the latter acts to increase it towards the radiative equilibrium temperature with a net entropy gain. After the fluid overturns and descends towards the convection zone, radiative energy loss again decreases the entropy of the fluid. Radiative heating and cooling of fluid elements that penetrate into the photosphere and overturn do not occur in equal amounts. The imbalance in the cumulative heating and cooling of these fluid elements is responsible for the reversal of temperature fluctuations with respect to height in the photosphere.

  1. Investigation of Physicochemical Drug Properties to Prepare Fine Globular Granules Composed of Only Drug Substance in Fluidized Bed Rotor Granulation

    National Research Council Canada - National Science Library

    Mise, Ryohei; Iwao, Yasunori; Kimura, Shin-ichiro; Osugi, Yukiko; Noguchi, Shuji; Itai, Shigeru

    2015-01-01

    ...%) drug-loading formulation using fluidized bed rotor granulation. Three drugs: acetaminophen (APAP); ibuprofen (IBU); and ethenzamide (ETZ) were used as model drugs based on their differences in wettability and particle size distribution...

  2. Twin screw wet granulation: the study of a continuous twin screw granulator using Positron Emission Particle Tracking (PEPT) technique.

    Science.gov (United States)

    Lee, Kai T; Ingram, Andy; Rowson, Neil A

    2012-08-01

    In this paper, Positron Emission Particle Tracking (PEPT) techniques are utilised to track the trajectory of single particles through the mixing and conveying zones of a Twin Screw Granulator (TSG). A TSG consisting of conveying zones and mixing zones is used in this study. The mixing zones are arranged with kneading discs at an angle of 30°, 60° or 90°. Experiments were carried out using different mixing configurations with various screw speed and total mass flow rate. The PEPT data obtained were then utilised to obtain the residence time distribution (RTD) and the Peclet number in an attempt to gain some insight into the mixing of the process. The fill level of the granulator was also estimated to study the mechanism of granulation. As might be expected, it was shown that the residence time of the granulation process increases with decreasing screw speed. It also increases with increasing angle of the arrangement of kneading blocks in the mixing zones, but will decreases when powder feed rate is increased. The fill level of the mixing zone in particular increases when the screw speed decreases or when powder feed rate increases. Furthermore, the fill level of the granulator will increase when the mixing zone configuration changes from 30° to 90°. It is shown that the granulator is never fully filled, even using 90° mixer elements implying limited compaction which may explain why the granules produced are porous compared with those from a high shear mixer. Interestingly, the RTD analysis reveals that the extent of axial mixing in the mixing zone of the granulator does not change significantly for different configurations and process conditions. There is evidence of a tail in the RTD which implies some material hold up and channelling.

  3. Design of a Typical Offshore Transportation System for External Corrosion

    Directory of Open Access Journals (Sweden)

    Shittu, A. A

    2016-07-01

    Full Text Available The external corrosion assessment of a typical offshore transportation system has been presented. Cathodic protection design was carried out for the pipeline and it was found that a bracelet square weld on anode of L = 195, G =101.6 , Thickness = 70, M = 149.75 , ∅ = 1.2235, N = 128 and s = 300was found to be satisfactory in providing secondary/ backup protection for the 48inchespipeline in the external environment provided. The external anticorrosion coating selected is the Three layer polyethylene (3LPE coating based on the dimensions of the pipeline and the design temperature of 80℃. The 3LPE external corrosioncoating will comprise of an inner layer fusion bond epoxy, a middle layer: adhesive and an outer layer: High density polyethylene (HDPE base with additives.

  4. Impact of screw elements on continuous granulation with a twin-screw extruder.

    Science.gov (United States)

    Djuric, Dejan; Kleinebudde, Peter

    2008-11-01

    The influence of different screw element types on wet granulation process with a twin-screw extruder was investigated. Lactose granules were prepared with different screw configurations such as conveying, combing mixer and kneading elements. The use of kneading blocks led to an almost complete agglomeration of lactose, whereas kneading and combing mixer elements resulted in smaller granules in comparison. Granule porosity varied between 17.4% and 50.6%. Granule friability values ranged from 1.2% to 38.5%. Conveying elements led to the most porous and friable granules, whereas kneading blocks produced the densest and least friable granules. Combing mixer elements produced granules with median properties. A linear correlation between granule porosity and the natural logarithm of granule friability was detected. Flowability of granules was also influenced by the element type. Compressed granules with higher granule porosities resulted in tablets with higher tensile strength values and vice versa. Twin-screw extruders proved to be a versatile tool for wet granulation. By the choice of a suitable screw element granule and tablet characteristics were influenced.

  5. Experimental study on detection of electrostatic discharges generated by polymer granules inside a metal silo

    Science.gov (United States)

    Choi, Kwangseok; Mogami, Tomofumi; Suzuki, Teruo

    2014-04-01

    To detect electrostatic discharges generated by polymer granules within a metal silo, we developed a novel and simple electrostatic discharge detector that utilizes a photosensor. The novel detector consists of a photosensor module in a metal cylinder, an optical band-pass filter, a quartz glass, a power supply, an amplifier for the photosensor module, and a digital oscilloscope. In this study, we conducted experiments at a real pneumatic powder transport facility that includes a metal silo to evaluate the novel detector using polypropylene granules. To determine the performance of the novel detector, we observed the electrostatic discharge within the metal silo using a conventional image intensifier system. The results obtained from the experiments show that the novel detector worked well in this study. The signals obtained with the novel detector were identical to the electrostatic discharges obtained with the conventional image intensifier system. The greatest advantage of this novel detector is that it is effective even when placed under external lights. In addition, the influence of various optical band-pass filters on the performance of the novel detector was discussed. Our study confirmed that an optical band-pass filter with a center wavelength of λ 330 nm (λ1/2: 315-345 nm) was the best performer among the optical band-pass filters used in this study.

  6. The Gs-linked receptor GPR3 inhibits the proliferation of cerebellar granule cells during postnatal development.

    Directory of Open Access Journals (Sweden)

    Shigeru Tanaka

    Full Text Available BACKGROUND: During postnatal murine and rodent cerebellar development, cerebellar granule precursors (CGP gradually stop proliferating as they differentiate after migration to the internal granule layer (IGL. Molecular events that govern this program remain to be fully elucidated. GPR3 belongs to a family of Gs-linked receptors that activate cyclic AMP and are abundantly expressed in the adult brain. METHODOLOGY/PRINCIPAL FINDINGS: To investigate the role of this orphan receptor in CGP differentiation, we determined that exogenous GPR3 expression in rat cerebellar granule neurons partially antagonized the proliferative effect of Sonic hedgehog (Shh, while endogenous GPR3 inhibition by siRNA stimulated Shh-induced CGP proliferation. In addition, exogenous GPR3 expression in CGPs correlated with increased p27/kip expression, while GPR3 knock-down led to a decrease in p27/kip expression. In wild-type mice, GPR3 expression increased postnatally and its expression was concentrated in the internal granular layer (IGL. In GPR3 -/- mice, the IGL was widened with increased proliferation of CGPs, as measured by bromodeoxyuridine incorporation. Cell cycle kinetics of GPR3-transfected medulloblastoma cells revealed a G0/G1 block, consistent with cell cycle exit. CONCLUSIONS/SIGNIFICANCE: These results thus indicate that GPR3 is a novel antiproliferative mediator of CGPs in the postnatal development of murine cerebellum.

  7. The number of granule cells in rat hippocampus is reduced after chronic mild stress and re-established after chronic escitalopram treatment

    DEFF Research Database (Denmark)

    Jayatissa, Magdalena N; Bisgaard, Christina; West, Mark J

    2008-01-01

    mild stress and chronic escitalopram treatment. Furthermore, we investigated which classes of immature granule cells are affected by stress and targeted by escitalopram. Rats were initially exposed to 2weeks of CMS and 4weeks of escitalopram treatment with concurrent exposure to stress. The behavioral...... changes, indicating a decrease in sensitivity to a reward, were assessed in terms of sucrose consumption. We found a significant 22.4% decrease in the total number of granule cells in the stressed rats. This decrease was reversed in the stressed escitalopram treated rats that responded to the treatment......, but not in the rats that did not respond to escitalopram treatment. These changes were not followed by alterations in the volume of the granule cell layer. We also showed a differential regulation of dentate neurons, in different stages of development, by chronic stress and chronic escitalopram treatment. Our study...

  8. Evolution of Externally Excited Convective Cells in Plasmas

    DEFF Research Database (Denmark)

    Sugai, H.; Juul Rasmussen, Jens; Thomsen, Kenneth

    1983-01-01

    Convective cells are excited externally in a fully ionized magnetized plasma, and their space-time evolution is investigated by two-dimensional potential measurements. A positive cell is excited externally in the `scrape-off' layer of a plasma column produced by surface ionization. Its interaction...

  9. Externally Verifiable Oblivious RAM

    Directory of Open Access Journals (Sweden)

    Gancher Joshua

    2017-04-01

    Full Text Available We present the idea of externally verifiable oblivious RAM (ORAM. Our goal is to allow a client and server carrying out an ORAM protocol to have disputes adjudicated by a third party, allowing for the enforcement of penalties against an unreliable or malicious server. We give a security definition that guarantees protection not only against a malicious server but also against a client making false accusations. We then give modifications of the Path ORAM [15] and Ring ORAM [9] protocols that meet this security definition. These protocols both have the same asymptotic runtimes as the semi-honest original versions and require the external verifier to be involved only when the client or server deviates from the protocol. Finally, we implement externally verified ORAM, along with an automated cryptocurrency contract to use as the external verifier.

  10. External Beam Therapy (EBT)

    Science.gov (United States)

    ... Esophageal Cancer Treatment Head and Neck Cancer Treatment Lung Cancer Treatment Prostate Cancer Treatment Brain Tumor Treatment Why is ... Radiation Oncology) Breast Cancer Treatment Esophageal Cancer Treatment Lung Cancer Treatment Images related to External Beam Therapy (EBT) Sponsored ...

  11. MALIGNANT EXTERNAL OTITIS

    OpenAIRE

    Massoud Moghaddam

    1993-01-01

    Two case reports of malignant external otitis in the elderly diabetics and their complications and management with regard to our experience at Amir Alam Hospital, Department of ENT will be discussed here.

  12. Checklists for external validity

    DEFF Research Database (Denmark)

    Dyrvig, Anne-Kirstine; Kidholm, Kristian; Gerke, Oke;

    2014-01-01

    RATIONALE, AIMS AND OBJECTIVES: The quality of the current literature on external validity varies considerably. An improved checklist with validated items on external validity would aid decision-makers in judging similarities among circumstances when transferring evidence from a study setting...... to an implementation setting. In this paper, currently available checklists on external validity are identified, assessed and used as a basis for proposing a new improved instrument. METHOD: A systematic literature review was carried out in Pubmed, Embase and Cinahl on English-language papers without time restrictions....... The retrieved checklist items were assessed for (i) the methodology used in primary literature, justifying inclusion of each item; and (ii) the number of times each item appeared in checklists. RESULTS: Fifteen papers were identified, presenting a total of 21 checklists for external validity, yielding a total...

  13. Migration with fiscal externalities.

    Science.gov (United States)

    Hercowitz, Z; Pines, D

    1991-11-01

    "This paper analyses the distribution of a country's population among regions when migration involves fiscal externalities. The main question addressed is whether a decentralized decision making [by] regional governments can produce an optimal population distribution...or a centralized intervention is indispensable, as argued before in the literature.... It turns out that, while with costless mobility the fiscal externality is fully internalized by voluntary interregional transfers, with costly mobility, centrally coordinated transfers still remain indispensable for achieving the socially optimal allocation."

  14. Sen cycles and externalities

    OpenAIRE

    Piggins, Ashley; Salerno, Gillian

    2016-01-01

    It has long been understood that externalities of some kind are responsible for Sen’s (1970) theorem on the impossibility of a Paretian liberal. However, Saari and Petron (2006) show that for any social preference cycle generated by combining the weak Pareto principle and individual decisiveness, every decisive individual must suffer at least one strong negative externality. We show that this fundamental result only holds when individual preferences are strict. Building on their contribution,...

  15. Formation of semi-compound C-type starch granule in high-amylose rice developed by antisense RNA inhibition of starch-branching enzyme.

    Science.gov (United States)

    Wei, Cunxu; Qin, Fengling; Zhou, Weidong; Chen, Yifang; Xu, Bin; Wang, Youping; Gu, Minghong; Liu, Qiaoquan

    2010-10-27

    Cereal starch granules with high-amylose and resistant starch (RS) always show irregular morphology and special crystalline structure, but their formation during grain development is not yet clear. In our previous studies, we had generated a transgenic rice line (TRS) enriched with amylose and RS, which contained semi-compound starch showing a C-type crystalline structure. In this study, the formation of semi-compound C-type starch granule during TRS endosperm development was carefully investigated with light, scanning electron, and transmission electron microscopes and X-ray powder diffraction. The results showed that the TRS starch subgranules, each with a central hilum, were individually initiated in amyloplast and showed an A-type crystal at the early stage of starch granule development, which was similar to that in its wild type. However, with the endosperm development, the amylose content in TRS endosperm starch increased and the B-type starch crystal was deposited in the periphery of subgranules; then, the adjacent subgranules fused together and finally formed a continuous outer layer band surrounding the entire circumference of the starch granule. Accordingly, a mechanistic model for the formation of semi-compound C-type starch granules is proposed.

  16. Identification of a major QTL controlling the content of B-type starch granules in Aegilops

    Science.gov (United States)

    Howard, Thomas; Rejab, Nur Ardiyana; Griffiths, Simon; Leigh, Fiona; Leverington-Waite, Michelle; Simmonds, James; Uauy, Cristobal; Trafford, Kay

    2011-01-01

    Starch within the endosperm of most species of the Triticeae has a unique bimodal granule morphology comprising large lenticular A-type granules and smaller near-spherical B-type granules. However, a few wild wheat species (Aegilops) are known to lack B-granules. Ae. peregrina and a synthetic tetraploid Aegilops with the same genome composition (SU) were found to differ in B-granule number. The synthetic tetraploid had normal A- and B-type starch granules whilst Ae. peregrina had only A-granules because the B-granules failed to initiate. A population segregating for B-granule number was generated by crossing these two accessions and was used to study the genetic basis of B-granule initiation. A combination of Bulked Segregant Analysis and QTL mapping identified a major QTL located on the short arm of chromosome 4S that accounted for 44.4% of the phenotypic variation. The lack of B-granules in polyploid Aegilops with diverse genomes suggests that the B-granule locus has been lost several times independently during the evolution of the Triticeae. It is proposed that the B-granule locus is susceptible to silencing during polyploidization and a model is presented to explain the observed data based on the assumption that the initiation of B-granules is controlled by a single major locus per haploid genome. PMID:21227932

  17. Microbial community variation in cryoconite granules on Qaanaaq Glacier, NW Greenland.

    Science.gov (United States)

    Uetake, Jun; Tanaka, Sota; Segawa, Takahiro; Takeuchi, Nozomu; Nagatsuka, Naoko; Motoyama, Hideaki; Aoki, Teruo

    2016-09-01

    Cryoconite granules are aggregations of microorganisms with mineral particles that form on glacier surfaces. To understand the processes by which the granules develop, this study focused on the altitudinal distribution of the granules and photosynthetic microorganisms on the glacier, bacterial community variation with granules size and environmental factors affecting the growth of the granules. Size-sorted cryoconite granules collected from five different sites on Qaanaaq Glacier were analyzed. C and N contents were significantly higher in large (diameter greater than 250 μm) granules than in smaller (diameter 30-249 μm) granules. Bacterial community structures, based on 16S rRNA gene amplicon sequencing, were different between the smaller and larger granules. The filamentous cyanobacterium Phormidesmis priestleyi was the dominant bacterial species in larger granules. Multivariate analysis suggests that the abundance of mineral particles on the glacier surface is the main factor controlling growth of these cyanobacteria. These results show that the supply of mineral particles on the glacier enhances granule development, that P. priestleyi is likely the key species for primary production and the formation of the granules and that the bacterial community in the granules changes over the course of the granule development.

  18. Aerobic Granulation in Sequencing Batch Reactor (SBR Treating Saline Wastewater

    Directory of Open Access Journals (Sweden)

    Ensieh Taheri

    2012-04-01

    Full Text Available Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 Background and Objectives: Aerobic sludge granulation is an advanced phenomenonin which its mechanisms have not been understood. Granulation can be a promising and novel biological wastewater treatment technology to eliminate organic and inorganic materials in future. High salinity is a parameter which leads to plasmolisatian and reduction of the cell activity. This could be a problem for biological treatment of the saline wastewater. Aerobic granule was formed and investigated during this study. Materials and Methods: This study is an intervention study on the treatment of wastewater with 500-10000 mg/L concentration of NaCl by sequencing batch reactor. Asynthesized wastewater including nutrient required for microorganism's growth was prepared. Input and output pH and EC were measured. Range of pH and DO varied between 7-8, and 2-5 mg/L, respectively. SEM technology was used to identify graduals properties.Results: In terms of color, granules divided into two groups of light brown and black. Granule ranged in 3-7mm with the sediment velocity of 0.9-1.35 m/s and density of 32-60 g/L.Properties of granules were varied. Filamentous bacteria and fungi were dominant in some granules. However non filamentous bacteria were dominant in others. EDX analysis indicated the presence of Ca and PO4.Conclusion: Granules with non filamentous bacterial were compact and settled faster. Presence of different concentrations of salinity leaded to plasmolysis of the bacterial cells and increased concentrations of EPS  in the system as a result  of which granulation accelerated. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso

  19. Impact of fill-level in twin-screw granulation on critical quality attributes of granules and tablets.

    Science.gov (United States)

    Meier, Robin; Moll, Klaus-Peter; Krumme, Markus; Kleinebudde, Peter

    2017-02-15

    In a previous study a change of the fill-level in the barrel exerted a huge influence on the twin-screw granulation (TSG) process of a high drug loaded, simplified formulation. The present work investigated this influence systematically. The specific feed load (SFL) indicating the mass per revolution as surrogate parameter for the fill-level was applied and the correlation to the real volumetric fill level of an extruder could be demonstrated by a newly developed method. A design of experiments was conducted to examine the combined influence of SFL and screw speed on the process and on critical quality attributes of granules and tablets. The same formulation was granulated at constant liquid level with the same screw configuration and led to distinctively different results by only changing the fill-level and the screw speed. The power consumption of the extruder increased at higher SFLs with hardly any influence of screw speed. At low SFL the median residence time was mainly fill-level dependent and at higher SFL mainly screw speed dependent. Optimal values for the product characteristics were found at medium values for the SFL. Granule size distributions shifted from mono-modal and narrow shape to broader and even bimodal distributions of larger median granule sizes, when exceeding or falling below a certain fill-level. Deviating from the optimum fill-level, tensile strength of tablets decreased by about 25 % and disintegration times of tablets increased for more than one third. At low fill-levels, material accumulation in front of the kneading zone was detected by pressure measurements and was assumed to be responsible for the unfavored product performance. At high fill-levels, granule consolidation due to higher propensity of contact with the result of higher material temperature was accounted for inferior product performance. The fill-level was found to be an important factor in assessment and development of twin-screw granulation processes as it impacted

  20. Preparation of porcelain tile granulates by more environmentally sustainable processes

    Energy Technology Data Exchange (ETDEWEB)

    Gil, C.; Silvestre, D.; Piquer, J.; Garcia-Ten, J.; Quereda, E.; Vicente, M. J.

    2012-07-01

    This study examines the feasibility of manufacturing glazed porcelain tiles with a more environmentally friendly manufacturing process, by reducing water and thermal energy consumption. The process studied in this paper is dry milling in a pendulum mill, with subsequent granulation (in order to obtain a press powder with similar flow ability to that of spray dried powders). The different morphology of the new granulate with respect to the standard spray-dried granulate modifies the microstructure of the green compacts and thus, their behaviour and fired tile properties. In order to obtain porcelain tiles with the required properties (water absorption, mechanical strength,) changes have been made in the raw materials mixture and in the processing variables. Finally, porcelain tiles measuring 50x50 cm have been manufactured at industrial scale with the new granulate using a conventional firing cycle, obtaining quality levels identical to those provided by the spray-dried granulate. These results open the possibility of preparing porcelain tile body compositions through a manufacturing process alternative to the standard one, more environmentally friendly and with lower costs. (Author)

  1. THE KINETICS OF CYTOPLASMIC GRANULE SECRETION IN NATURAL KILLER CYTOTOXICITY

    Institute of Scientific and Technical Information of China (English)

    龚伊红; R.R.Hcrberman; C.W.Reynolds

    1994-01-01

    Antisexum against purified cytoplasmic granules from rat LGL tumor cells, and protein A-gold inmmnoelec-tron microscopy were used to study the secretory events in lysis of YAC-1 tumor cells by rat LGL tumor cells or by isolated LGL from normal rats. After 30 min incubation of effector and target cells together, gold-labeled cyto-plasmic granules were often seen concentrated in the area of the LGL adjacent to the ~ YAC-1 Within 60min,the grantees were observed to move to the cell border near the conjugazed site. At this point, fine granules were fused with file cell membrane, and subsequently released file gold-labeled contents into the junction between the LGL and the target cell. Gold particles could be seen at the B-T interface, on the surface,or sometimes on the target cell surface.These data provide direct evidence for the hypothesis that under conditions of active cytotoxicity,natural killer cells secrete their cytoplasmic granule contents leading to the deposition of granule material on the target cell surface and the eventual lysis of the cell.

  2. Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules.

    Science.gov (United States)

    Christel, Theresa; Geffers, Martha; Klammert, Uwe; Nies, Berthold; Höß, Andreas; Groll, Jürgen; Kübler, Alexander C; Gbureck, Uwe

    2014-09-01

    Magnesium phosphate compounds, as for example struvite (MgNH4PO4·6H2O), have comparable characteristics to calcium phosphate bone substitutes, but degrade faster under physiological conditions. In the present work, we used a struvite forming calcium doped magnesium phosphate cement with the formulation Ca0.75Mg2.25(PO4)2 and an ammonium phosphate containing aqueous solution to produce round-shaped granules. For the fabrication of spherical granules, the cement paste was dispersed in a lipophilic liquid and stabilized by surfactants. The granules were characterized with respect to morphology, size distribution, phase composition, compressive strength, biocompatibility and solubility. In general, it was seen that small granules can hardly be produced by means of emulsification, when the raw material is a hydraulic paste, because long setting times promote coalescence of initially small unhardened cement droplets. Here, this problem was solved by using an aqueous solution containing both the secondary (NH4)2HPO4 and primary ammonium phosphates NH4H2PO4 to accelerate the setting reaction. This resulted in granules with 97 wt.% having a size in the range between 200 and 1,000 μm. The novel solution composition doubled the compressive strength of the cement to 37 ± 5 MPa without affecting either the conversion to struvite or the cytocompatibility using human fetal osteoblasts.

  3. Platelet granule exocytosis: A comparison with chromaffin cells

    Directory of Open Access Journals (Sweden)

    Jennifer eFitch-Tewfik

    2013-06-01

    Full Text Available The rapid secretion of bioactive amines from chromaffin cells constitutes an important component of the fight or flight response of mammals to stress. Platelets respond to stresses within the vasculature by rapidly secreting cargo at sites of injury, inflammation, or infection. Although chromaffin cells derive from the neural crest and platelets from bone marrow megakaryocytes, both have evolved a heterogeneous assemblage of granule types and a mechanism for efficient release. This article will provide an overview of granule formation and exocytosis in platelets with an emphasis on areas in which the study of chromaffin cells has influenced that of platelets and on similarities between the two secretory systems. Commonalities include the use of transporters to concentrate bioactive amines and other cargos into granules, the role of cytoskeletal remodeling in granule exocytosis, and the use of granules to provide membrane for cytoplasmic projections. The SNAREs and SNARE accessory proteins used by each cell type will also be considered. Finally, we will discuss the newly appreciated role of dynamin family proteins in regulated fusion pore formation. This evaluation of the comparative cell biology of regulated exocytosis in platelets and chromaffin cells demonstrates a convergence of mechanisms between two disparate cell types both tasked with responding rapidly to physiological stimuli.

  4. Massively augmented hippocampal dentate granule cell activation accompanies epilepsy development

    Science.gov (United States)

    Dengler, Christopher G.; Yue, Cuiyong; Takano, Hajime; Coulter, Douglas A.

    2017-01-01

    In a mouse model of temporal lobe epilepsy, multicellular calcium imaging revealed that disease emergence was accompanied by massive amplification in the normally sparse, afferent stimulation-induced activation of hippocampal dentate granule cells. Patch recordings demonstrated reductions in local inhibitory function within the dentate gyrus at time points where sparse activation was compromised. Mimicking changes in inhibitory synaptic function and transmembrane chloride regulation was sufficient to elicit the dentate gyrus circuit collapse evident during epilepsy development. Pharmacological blockade of outward chloride transport had no effect during epilepsy development, and significantly increased granule cell activation in both control and chronically epileptic animals. This apparent occlusion effect implicates reduction in chloride extrusion as a mechanism contributing to granule cell hyperactivation specifically during early epilepsy development. Glutamine plays a significant role in local synthesis of GABA in synapses. In epileptic mice, sparse granule cell activation could be restored by glutamine application, implicating compromised GABA synthesis. Glutamine had no effect on granule cell activation earlier, during epilepsy development. We conclude that compromised feedforward inhibition within the local circuit generates the massive dentate gyrus circuit hyperactivation evident in animals during and following epilepsy development. However, the mechanisms underlying this disinhibition diverge significantly as epilepsy progresses. PMID:28218241

  5. Studi Awal Desain Pabrik Pupuk Organik Granul Dari Organic Waste

    Directory of Open Access Journals (Sweden)

    Zulfatul Hanna

    2015-12-01

    Full Text Available 800x600 Banyak pertanian di Indonesia yang masih bergantung pada penggunaan pupuk kimia. Padahal penggunaan pupuk kimia yang berlebihan dapat menyebabkan penurunan bahan organik tanah. Untuk menyeimbangkannnya saat ini petani juga sedang menggalakkan penggunaan pupuk organik. Sehingga membuat kebutuhan pupuk organik meningkat setiap tahunnya. Pendirian pabrik pupuk organik granul ini dapat memenuhi kebutuhan pupuk organik untuk petani. Prosess pembuatan pupuk organik granul terdiri dari pencampuran bahan baku, yakni sampah organik, kotoran sapi, kotoran domba, dan dipotong dengan rotary knife cutter. Tahap berikutnya adalah proses fermentasi, dengan penambahan bioactivator agar meningkatkan kandungan C-organik, phosphor, dan kalium. Selanjutnya adalah proses granulasi, pembesaran dari partikel dengan proses aglomerasi. Ukuran yang diharapkan pada proses granulasi ini adalah 2-4 mm sehingga produk undersize maupun oversize akan dikembalikan ke dalam granulator setelah melewati screener. Selanjutnya pupuk organik granul dikeringkan. Selanjutnya produk dipisahkan berdasarkan ukurannya lalu didinginkan di Rotary cooler. Setelah keluar dari Rotary Cooler suhu keluaran sekitar 40 oC dan masih mengandung kadar air sebesar 13,7%. Produk dari rotary cooler siap untuk di packaging dan masuk ke dalam pupuk organik granul storage. Dari analisa ekonomi didapatkan BEP sebesar 45% dengan POT sesudah pajak sebesar 4,8 tahun. Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4

  6. Environmental external effects from wind power based on the EU ExternE methodology

    DEFF Research Database (Denmark)

    Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

    1998-01-01

    The European Commission has launched a major study project, ExternE, to develop a methodology to quantify externalities. A “National Implementation Phase”, was started under the Joule II programme with the purpose of implementing the ExternE methodology in all member states. The main objective...

  7. Non-granule PSA-NCAM immunoreactive neurons in the rat hippocampus.

    Science.gov (United States)

    Nacher, Juan; Blasco-Ibáñez, José M; McEwen, Bruce S

    2002-03-15

    The polysialylated form of the neural cell adhesion molecule (PSA-NCAM) continues to be expressed in the adult hippocampus, mainly in a subset of neurons located in the innermost portion of the granule cell layer. PSA-NCAM immunoreactive neurons have also been described outside this layer in humans, where they are severely reduced in schizophrenic brains. Given this important clinical implication, we were interested in finding whether similar neurons existed in the adult rat hippocampus and to characterize their distribution, morphology and phenotype. PSA-NCAM immunocytochemistry reveals labeled neurons in the subiculum, fimbria, alveus, hilus, and stratum oriens, lucidum and radiatum of CA3 and CA1. They are mainly distributed in the ventral hippocampus, and have polygonal or fusiform somata with multipolar or bipolar morphology. These neurons show long straight dendrites, which reach several strata and even enter the fimbria and the alveus. These dendrites are often varicose, appear devoid of excrescences and apparently do not show spines. Most of these neurons display GABA immunoreactivity and further analysis has shown that a subpopulation expresses calretinin, but not somatostatin, neuropeptide Y, parvalbumin, calbindin or NADPH diaphorase. Our study demonstrates that there is an important subpopulation of PSA-NCAM immunoreactive neurons, many of which can be considered interneurons, outside the rat granule cell layer, probably homologous to those described in the human hippocampus. The presence of the polysialylated form of NCAM in these neurons could indicate that they are undergoing continuous remodeling during adulthood and may have an important role in hippocampal structural plasticity.

  8. Externality or sustainability economics?

    Energy Technology Data Exchange (ETDEWEB)

    Bergh, Jeroen C.J.M. van den [ICREA, Barcelona (Spain); Department of Economics and Economic History and Institute for Environmental Science and Technology, Universitat Autonoma de Barcelona (Spain)

    2010-09-15

    In an effort to develop 'sustainability economics' Baumgaertner and Quaas (2010) neglect the central concept of environmental economics-'environmental externality'. This note proposes a possible connection between the concepts of environmental externality and sustainability. In addition, attention is asked for other aspects of 'sustainability economics', namely the distinction weak/strong sustainability, spatial sustainability and sustainable trade, distinctive sustainability policy, and the ideas of early 'sustainability economists'. I argue that both sustainability and externalities reflect a systems perspective and propose that effective sustainability solutions require that more attention is given to system feedbacks, notably other-regarding preferences and social interactions, and energy and environmental rebound. The case of climate change and policy is used to illustrate particular statements. As a conclusion, a list of 20 insights and suggestions for research is offered. (author)

  9. Metasurface external cavity laser

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Luyao, E-mail: luyaoxu.ee@ucla.edu; Curwen, Christopher A.; Williams, Benjamin S. [Department of Electrical Engineering, University of California, Los Angeles, California 90095 (United States); California NanoSystems Institute, University of California, Los Angeles, California 90095 (United States); Hon, Philip W. C.; Itoh, Tatsuo [Department of Electrical Engineering, University of California, Los Angeles, California 90095 (United States); Chen, Qi-Sheng [Northrop Grumman Aerospace Systems, Redondo Beach, California 90278 (United States)

    2015-11-30

    A vertical-external-cavity surface-emitting-laser is demonstrated in the terahertz range, which is based upon an amplifying metasurface reflector composed of a sub-wavelength array of antenna-coupled quantum-cascade sub-cavities. Lasing is possible when the metasurface reflector is placed into a low-loss external cavity such that the external cavity—not the sub-cavities—determines the beam properties. A near-Gaussian beam of 4.3° × 5.1° divergence is observed and an output power level >5 mW is achieved. The polarized response of the metasurface allows the use of a wire-grid polarizer as an output coupler that is continuously tunable.

  10. Summary of Granulation Matrix Testing for the Plutonium Immobilization Program

    Energy Technology Data Exchange (ETDEWEB)

    Herman, C.C.

    2001-10-19

    In FY00, a matrix for process development testing was created to identify those items related to the ceramic process that had not been fully developed or tested and to help identify variables that needed to be tested. This matrix, NMTP/IP-99-003, was jointly created between LLNL and SRTC and was issued to all affected individuals. The matrix was also used to gauge the progress of the development activities. As part of this matrix, several series of tests were identified for the granulation process. This summary provides the data and results from the granulation testing. The results of the granulation matrix testing were used to identify the baseline process for testing in the PuCTF with cold surrogates in B241 at LLNL.

  11. Arginine-rich cationic proteins of human eosinophil granules

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, I.; Venge, P.; Spitznagel, J.K.; Lehrer, R.I.

    1977-01-01

    Several arginine-rich cationic proteins previously isolated from granules of leukemic myeloid cells have been found to reside primarily in human eosinophil leukocytes. The major component has a molecular weight of 21,000 and it contains approximately 2.6 moles of zinc per mole of protein. Velocity centrifugation of cytoplasm from leukocytes of patients with marked eosinophilia showed that this group of proteins is packaged in the crystalloid-containing large eosinophil granules. Approximately 30% of the protein content of eosinophil granules belonged to this group of cationic proteins. Bactericidal or esterolytic activities of the cationic proteins were not detected, nor did they inhibit guinea pig anaphylatoxin or histamine-induced contraction. The basic protein previously demonstrated in guinea pig eosinophils may be analogous to the group of basic proteins of human eosinophils but great differences are found for molecular weight and amino acid composition.

  12. Studies on preparation of aceclofenac pellets by centrifugal granulator

    Directory of Open Access Journals (Sweden)

    Zibin GAO

    Full Text Available To prepare aceclofenac pellets by centrifugal granulation. Using 90~100 g of starch pellets as the core pellets,100 g of aceclofenac mixed with 50 g of microcrystalline cellulose(MCC and 4 g talc, methyl cellulose (HPMC as binder,the aceclofenac pellets were prepared by centrifugal granulation .And evaluate the quality of the pellets. The aceclofenac pellets had high yield and less losses,the pellets had a partical size of 0.70~0.88 mm(18~24 mesh)and had uniform particle size .the moisture ,drug content and dissolution meet the requirement . Aceclofenac pellets were prepared by the process of centrifugal granulation .The preparation prescription and process parameters were optimized by single factor method .and the pellets meet the standard requirements.

  13. Enterovirus Control of Translation and RNA Granule Stress Responses

    Directory of Open Access Journals (Sweden)

    Richard E. Lloyd

    2016-03-01

    Full Text Available Enteroviruses such as poliovirus (PV and coxsackievirus B3 (CVB3 have evolved several parallel strategies to regulate cellular gene expression and stress responses to ensure efficient expression of the viral genome. Enteroviruses utilize their encoded proteinases to take over the cellular translation apparatus and direct ribosomes to viral mRNAs. In addition, viral proteinases are used to control and repress the two main types of cytoplasmic RNA granules, stress granules (SGs and processing bodies (P-bodies, PBs, which are stress-responsive dynamic structures involved in repression of gene expression. This review discusses these processes and the current understanding of the underlying mechanisms with respect to enterovirus infections. In addition, the review discusses accumulating data suggesting linkage exists between RNA granule formation and innate immune sensing and activation.

  14. Enterovirus Control of Translation and RNA Granule Stress Responses

    Science.gov (United States)

    Lloyd, Richard E.

    2016-01-01

    Enteroviruses such as poliovirus (PV) and coxsackievirus B3 (CVB3) have evolved several parallel strategies to regulate cellular gene expression and stress responses to ensure efficient expression of the viral genome. Enteroviruses utilize their encoded proteinases to take over the cellular translation apparatus and direct ribosomes to viral mRNAs. In addition, viral proteinases are used to control and repress the two main types of cytoplasmic RNA granules, stress granules (SGs) and processing bodies (P-bodies, PBs), which are stress-responsive dynamic structures involved in repression of gene expression. This review discusses these processes and the current understanding of the underlying mechanisms with respect to enterovirus infections. In addition, the review discusses accumulating data suggesting linkage exists between RNA granule formation and innate immune sensing and activation. PMID:27043612

  15. Paronychia and granulation tissue formation during treatment with isotretinoin*

    Science.gov (United States)

    Figueiras, Daniela de Almeida; Ramos, Ticiana Batista; Marinho, Ayana Karla de Oliveira Ferreira; Bezerra, Milena Soneley Mendonça; Cauas, Renata Cavalcanti

    2016-01-01

    This paper describes the association of two unusual side effects of treatment with isotretinoin for severe acne: paronychia and excess granulation tissue in the nails furrows. We report a case of male patient aged 19 years, who in the course of the 36th week of treatment with isotretinoin for acne grade III showed erythema, edema, excess granulation tissue and onychocryptosis in various nail beds of hands and feet, with no history of trauma associated. A literature review revealed few reports of these adverse events, and two clinical patterns of exuberant granulation tissue has been described: one in periungual location and other in lesions of previous acne. The rarity and lack of knowledge on the best treatment for granuloma-like reactions make this theme a considerable challenge. PMID:27192525

  16. Cystatin F Ensures Eosinophil Survival by Regulating Granule Biogenesis.

    Science.gov (United States)

    Matthews, Stephen P; McMillan, Sarah J; Colbert, Jeff D; Lawrence, Rachel A; Watts, Colin

    2016-04-19

    Eosinophils are now recognized as multifunctional leukocytes that provide critical homeostatic signals to maintain other immune cells and aid tissue repair. Paradoxically, eosinophils also express an armory of granule-localized toxins and hydrolases believed to contribute to pathology in inflammatory disease. How eosinophils deliver their supporting functions while avoiding self-inflicted injury is poorly understood. We have demonstrated that cystatin F (CF) is a critical survival factor for eosinophils. Eosinophils from CF null mice had reduced lifespan, reduced granularity, and disturbed granule morphology. In vitro, cysteine protease inhibitors restored granularity, demonstrating that control of cysteine protease activity by CF is critical for normal eosinophil development. CF null mice showed reduced pulmonary pathology in a model of allergic lung inflammation but also reduced ability to combat infection by the nematode Brugia malayi. These data identify CF as a "cytoprotectant" that promotes eosinophil survival and function by ensuring granule integrity. VIDEO ABSTRACT.

  17. Influence of external circulation on sludge characteristics during start-up of internal circulation reactor

    Institute of Scientific and Technical Information of China (English)

    DING Jian-nan; WANG Dian-zuo

    2005-01-01

    The start-up of external circulation-added internal circulation(IC) reactor was finished in 26 d, 32 d fewer than that of IC reactor. To evaluate the influence of the added external circulation on the development of granular sludge, the characteristics of the granular sludge taken from the two tested laboratory-scale reactors during start-up were studied. The results show that the added external circulation can enhance biomass granulation, accelerate granule development and improve sludge characteristics. At the end of start-up, the granular size of sludge in external circulation-added IC reactor greatly increases with a size distribution much better than that of sludge in IC reactor. The granular sludge originated from external circulation-added IC reactor contains more extracellular polymers and has a greater settling velocity than that from IC reactor. Methanogenic activity of the granular sludge from the external circulation-added IC reactor started 26 d ago reaches 358.23 mL·g-1·d-1, 1.66 and 1.20 times as great as that of the sludge from the IC reactor started 26 d and 58 d ago respectively.

  18. UVC-induced stress granules in mammalian cells.

    Directory of Open Access Journals (Sweden)

    Mohamed Taha Moutaoufik

    Full Text Available Stress granules (SGs are well characterized cytoplasmic RNA bodies that form under various stress conditions. We have observed that exposure of mammalian cells in culture to low doses of UVC induces the formation of discrete cytoplasmic RNA granules that were detected by immunofluorescence staining using antibodies to RNA-binding proteins. UVC-induced cytoplasmic granules are not Processing Bodies (P-bodies and are bone fide SGs as they contain TIA-1, TIA-1/R, Caprin1, FMRP, G3BP1, PABP1, well known markers, and mRNA. Concomitant with the accumulation of the granules in the cytoplasm, cells enter a quiescent state, as they are arrested in G1 phase of the cell cycle in order to repair DNA damages induced by UVC irradiation. This blockage persists as long as the granules are present. A tight correlation between their decay and re-entry into S-phase was observed. However the kinetics of their formation, their low number per cell, their absence of fusion into larger granules, their persistence over 48 hours and their slow decay, all differ from classical SGs induced by arsenite or heat treatment. The induction of these SGs does not correlate with major translation inhibition nor with phosphorylation of the α subunit of eukaryotic translation initiation factor 2 (eIF2α. We propose that a restricted subset of mRNAs coding for proteins implicated in cell cycling are removed from the translational apparatus and are sequestered in a repressed form in SGs.

  19. Influence of filler selection on twin screw foam granulation.

    Science.gov (United States)

    Rocca, K E; Weatherley, S; Sheskey, P J; Thompson, M R

    2015-01-01

    The influence of filler selection in wet granulation was studied for the novel case where the binder is delivered as an unstable, semi-rigid aqueous foam to an extrusion process. The work primarily examined the impact of differing concentrations of microcrystalline cellulose (Avicel PH® 101) in a formulation with spray-dried α-lactose monohydrate (Flowlac® 100) in regards to wetting and granule nucleation for this relatively new technique known as continuous foam granulation. Foam stability was varied within the work to change its drainage and coarsening behavior atop these powder excipients, by use of different foamable binding agents (METHOCEL™ F4 PLV and METHOCEL™ Premium VLV) as well as by adjusting the foam quality. A static bed penetration test was first used to study the foam behavior in wetting these powders without the processing constraints of an extruder which limit possible liquid-to-solids ratios as well as introduce shear which may complicate interpretation of the mechanism. The test found that the penetration time to saturate these powders decreased as their water absorption capacity increased which in turn decreased the size of the formed nuclei. Differences in the stability of the foamed binder had minimal influence on these attributes of wetting despite its high spread-to-soak behavior. The size of granules produced by extrusion similarly demonstrated sensitivity to the increasing water absorption capacity of the filler and little dependency on foam properties. The different liquid-to-solids ratios required to granulate these different formulations inside the extruder highlighted an evolving concept of powder lubricity for continuous foam granulation.

  20. In-Situ Fabrication of a Self-Aligned Selective Emitter Silicon Solar Cell Using the Gold Top Contacts To Facilitate the Synthesis of a Nanostructured Black Silicon Antireflective Layer Instead of an External Metal Nanoparticle Catalyst.

    Science.gov (United States)

    Lu, Yen-Tien; Barron, Andrew R

    2015-06-10

    Silicon solar cells with nanopore-type black silicon (b-Si) antireflection (AR) layers and self-aligned selective emitter (SE) are reported in which the b-Si structure is prepared without the traditional addition of a nanoparticle (NP) catalyst. The contact-assisted chemical etching (CACE) method is reported here for the first time, in which the metal top contacts on silicon solar cell surfaces function as the catalysts for b-Si fabrication and the whole etching process can be done in minutes at room temperature. The CACE method is based on the metal-assisted chemical etching (MACE) solution but without or metal precursor in the Si etchant (HF:H2O2:H2O), and the Au top contacts, or catalysts, are not removed from the solar cell surface after the etching. The effects of etching time, HF and H2O2 concentration, and the HF:H2O2 ratio on the b-Si morphology, surface reflectivity, and solar cell efficiency have been investigated. Higher [HF] and [H2O2] with longer etching time cause collapse of the b-Si nanoporous structure and penetration of the p-n junctions, which are detrimental to the solar cell efficiency. The b-Si solar cell fabricated with the HF:H2O2:H2O volume ratio of 3:3:20 and a 3 min etch time shows the highest efficiency 8.99% along with a decrease of reflectivity from 36.1% to 12.6% compared to that of the nonetched Si solar cell.

  1. The effect of Jujuboside A on the evoked field potentials of granule cells in dentate gyrus

    Institute of Scientific and Technical Information of China (English)

    封洲燕; 郑筱祥

    2002-01-01

    Jujuboside A (JuA) is a main component of Jujubogenin extracted from the seeds of Ziziphus. The authors have not seen any report on JuA's direct effect on the neurons of the central nervous system. This study aimed to assess the effect of JuA on paired-pulse responses of dentate gyrus granule cells in urethane-anaesthetized rats, used intracerebroventricular (i.c.v.) JuA to mimic in vitro bath conditions in vivo. Paired-pulse stimuli with 80ms interpulse interval were used to stimulate the perforant pathway. Evoked responses were recorded in the dentate gyrus cell layer after i.c.v. administration of 0.9% normal saline or JuA. In the first responses, the slopes of excitatory postsynaptic potential (EPSP1) and the amplitudes of population spike (PS1) decreased significantly after administration of JuA while the PS1 latencies increased significantly. In the second responses, the EPSP2 slopes and PS2 latencies were changed similarly to those of the first ones, but PS2 amplitudes increased. The results showed that JuA may have some inhibitory effect on the granule cell excitability mediated by presynaptic mechanism but may have little effect on the excitability mediated by postsynaptic mechanism since the second evoked N-methyl-D-aspartic mediating paired-pulse facilitation is a postsynaptic mechanism.

  2. Widespread Occurrence of Trenching Patterns in the Granulation Field: Evidence for Roll Convection?

    Science.gov (United States)

    Getling, A. V.; Buchnev, A. A.

    2008-04-01

    Time-averaged series of granulation images are analysed using COLIBRI, a purpose-adapted version of a code originally developed to detect straight or curvilinear features in aerospace images. The image-processing algorithm utilises a nonparametric statistical criterion that identifies a straight-line segment as a linear feature (lineament) if the photospheric brightness at a certain distance from this line on both sides is stochastically lower or higher than at the line itself. Curvilinear features can be detected as chains of lineaments, using a modified criterion. Once the input parameters used by the algorithm are properly adjusted, the algorithm highlights “ridges” and “trenches” in the relief of the brightness field, drawing white and dark lanes. The most remarkable property of the trenching patterns is a nearly universally present parallelism of ridges and trenches. Since the material upflows are brighter than the downflows, the alternating, parallel light and dark lanes should reflect the presence of roll convection in the subphotospheric layers. If the numerous images processed by us are representative, the patterns revealed suggest a widespread occurrence of roll convection in the outer solar convection zone. In particular, the roll systems could form the fine structure of larger scale, supergranular and/or mesogranular convection flows. Granules appear to be overheated blobs of material that could develop into convection rolls owing to instabilities of roll motion.

  3. Stochastic Control - External Models

    DEFF Research Database (Denmark)

    Poulsen, Niels Kjølstad

    2005-01-01

    This note is devoted to control of stochastic systems described in discrete time. We are concerned with external descriptions or transfer function model, where we have a dynamic model for the input output relation only (i.e.. no direct internal information). The methods are based on LTI systems...

  4. Productivity Change and Externalities

    DEFF Research Database (Denmark)

    Kravtsova, Victoria

    2014-01-01

    firms and the economy as a whole. The approach used in the current research accounts for different internal as well as external factors that individual firms face and evaluates the effect on changes in productivity, technology as well as the efficiency of domestic firms. The empirical analysis focuses...... change in different types of firms and sectors of the economy...

  5. Multiple external root resorption.

    Science.gov (United States)

    Yusof, W Z; Ghazali, M N

    1989-04-01

    Presented is an unusual case of multiple external root resorption. Although the cause of this resorption was not determined, several possibilities are presented. Trauma from occlusion, periodontal and pulpal inflammation, and resorption of idiopathic origin are all discussed as possible causes.

  6. Physical, electrochemical, and thermal properties of granulated natural graphite as anodes for Li-ion batteries.

    Science.gov (United States)

    Jo, Yong Nam; Park, Min-Sik; Kim, Jae-Hun; Kim, Young-Jun

    2013-05-01

    Two different types of granulated graphites were synthesized by blending and kneading of natural graphite with pitch followed by sintering methods. The electrochemical performances of granulated graphites were investigated as anode materials for use in Li-ion batteries. The blending type granulated graphite possesses a large amount of cavities and voids, while the kneading type granulated graphite has a relatively compact microstructure, which is responsible for a high tap density. Both granulated graphites show improved the initial coulombic efficiencies as a result of decrease of surface area by the granulations. In particular, the kneading type granulated graphite exhibits an excellent rate-capability without significant capacity loss. In addition, the thermal stabilities of both granulated graphites were also improved, which could be attributed to the decrease of active surface area due to pitch coating.

  7. Modeling of lithium granule injection in NSTX using M3D-C1

    Science.gov (United States)

    Fil, A.; Kolemen, E.; Ferraro, N.; Jardin, S.; Parks, P. B.; Lunsford, R.; Maingi, R.

    2017-05-01

    In this paper, we present simulations of pedestal control by lithium granule injection (LGI) in NSTX. A model for small granule ablation has been implemented in the M3D-C1 code (Jardin et al 2012 Comput. Sci. Discovery 5 014002), allowing the simulation of realistic lithium granule injections. 2D and 3D simulations of Li injections in NSTX H-mode plasmas are performed and the effect of granule size, injection angle and velocity on the pedestal gradient increase is studied. The amplitude of the local pressure perturbation caused by the granules is found to be highly dependent on the solid granule size. Adjusting the granule injection velocity allows one to inject more particles at the pedestal top. 3D simulations show the destabilization of high order MHD modes whose amplitude is directly linked to the localized pressure perturbation, which is found to depend on the toroidal localization of the granule density source.

  8. Effect of Granule Sizes on Acoustic Properties of Protein-Based Silica Aerogel Composites via Novel Inferential Transmission Loss Method

    Directory of Open Access Journals (Sweden)

    Mahesh Sachithanadam

    2016-03-01

    Full Text Available The acoustic properties of the silica aerogel (SA granules of various sizes from 0.50 to 3.35 mm, distributed into six groups of nominal sizes and measured via a two-microphone impedance tube, are presented. The absorption coefficients of the SA granules were evaluated at ultra- to super-low frequency range from 50–1600 Hz. It was observed that nominal SA granules with sizes of 1.2 mm (AG2 and 1.7 mm (AG3 displayed the best absorption coefficients. When tested with granules filled at 5 cm depth, AG2 and AG3 absorption coefficients peaked at 980 Hz with values of 0.86 and 0.81, respectively. A novel approach to measure transmission loss (TL by using “inferential” principle is presented. This novel method, named “Inferential Transmission Loss Method” (InTLM, revealed that the average TL, TLavg for both AG2 and AG3 SA granules was 14.83 dB and 15.35 dB, respectively. Gelatin silica aerogels doped with sodium dodecyl sulfate (GSA–SDS composites comprising of 1.2 mm (GSA–AG2 and 1.7 mm (GSA–AG3 granules of various configurations were fabricated and evaluated for absorption coefficients and TL with known traditional acoustic panels. The results showed that GSA–AG3 had a better absorption coefficient over other configurations for the same corresponding thickness reaching the peak of 0.6 from 1300 to 1450 Hz with TLavg between 10.7 and 20.3 decibels. The four-layered GSA–AG2 and GSA–AG3 composites showed exceptionally high absorption from 500 to 800 Hz suitable for narrow band applications. Lastly, the “InTLM” was matched with the sound meter measurements, with high accuracy between 0.3 and 3.2 dB for low-frequency testing (50–1600 Hz.

  9. To prepare and characterize microcrystalline cellulose granules using water and isopropyl alcohol as granulating agents and determine its end-point by thermal and rheological tools.

    Science.gov (United States)

    Chaudhari, Smruti P; Dave, Rutesh H

    2015-05-01

    Microcrystalline cellulose (MCC-102) is one of the most commonly used excipient in the pharmaceutical industry. For this research purpose, authors have developed a different technique to determine the end point for MCC-102 using water and isopropyl alcohol 70% (IPA) as granulating agent. Wet and dry granules obtained were characterized for their flow properties using the powder rheometer and thermal analysis. Powder rheometer was used to measure basic flowability energy (BFE), specific energy (SE), percentage compressibility, permeability and aeration. Thermal analysis includes effusivity and differential scanning calorimetry (DSC) measurements. BFE and SE results showed water granules requires high energy as compared to IPA granules. Permeability and compressibility results suggest IPA forms more porous granules and have better compressibility as compared to water granules. Hardness data reveals interesting phenomena in which as the amount of water increases, hardness decreases and vice-versa for IPA. Optimal granules were obtained in the range of 45-55% w/w. DSC data supported the formation of optimal granules. Empirical measurements like angle of repose did not reveal any significant differences between powder flow among various granules. In this paper, with the help of thermal effusivity and powder rheology we were able to differentiate between various powder flows and determine the optimal range for granule formation.

  10. Comparison of novel granulated pellet-containing tablets and traditional pellet-containing tablets by artificial neural networks.

    Science.gov (United States)

    Huang, Ying; Yao, Qinghe; Zhu, Chune; Zhang, Xuan; Qin, Lingzhen; Wang, Qinruo; Pan, Xin; Wu, Chuanbin

    2015-01-01

    Novel granulated pellets technique was adopted to prepare granulated pellet-containing tablets (GPCT). GPCT and traditional pellet-containing tablets (PCT) were prepared according to 29 formulations devised by the Design Expert 7.0, with doxycycline hydrochloride as model drug, blends of Eudragit FS 30D and Eudragit L 30D-55 as coating materials, for the comparison study to confirm the superiority of GPCT during compaction. Eudragit FS 30D content, coating weight gain, tablet hardness and pellet size were chosen as influential factors to investigate the properties and drug release behavior of tablets. The correlation coefficients between the experimental values and the predicted values by artificial neural networks (ANNs) for PCT and GPCT were 0.9474 and 0.9843, respectively, indicating the excellent prediction of ANNs. The similarity factors (f2) for release profiles of GPCT and the corresponding original pellets were higher than those of PCT, suggesting that the excipient layer of granulated pellets absorbed the compressing force and protected the integrity of coating films during compaction.

  11. Urethral Reconstruction Using Mesothelial Cell-Seeded Autogenous Granulation Tissue Tube: An Experimental Study in Male Rabbits

    Science.gov (United States)

    Jiang, Shiwei; Xu, Zhonghua; Zhao, Yuanyuan; Yan, Lei; Zhou, Zunlin

    2017-01-01

    Objective. This study was to evaluate the utility of the compound graft for tubularized urethroplasty by seeding mesothelial cells onto autogenous granulation tissue. Methods. Silastic tubes were implanted subcutaneously in 18 male rabbits, of which nine underwent omentum biopsies simultaneously for in vitro expansion of mesothelial cells. The granulation tissue covering the tubes was harvested 2 weeks after operation. Mesothelial cells were seeded onto and cocultured with the tissue for 7 days. A pendulous urethral segment of 1.5 cm was totally excised. Urethroplasty was performed with mesothelial cell-seeded tissue tubes in an end-to-end fashion in nine rabbits and with unseeded grafts in others as controls. Serial urethrograms were performed at 1, 2, and 6 months postoperatively. Meanwhile, the neourethra was harvested and analyzed grossly and histologically. Results. Urethrograms showed cell-seeded grafts maintained wide at each time point, while strictures formation was found in unseeded grafts. Histologically, layers of urothelium surrounded by increasingly organized smooth muscles were observed in seeded grafts. In contrast, myofibroblasts accumulation and extensive scarring occurred in unseeded grafts. Conclusions. Mesothelial cell-seeded granulation tissue tube can be successfully used for tubularized urethroplasty in male rabbits.

  12. Deletion of the NMDA receptor GluN2A subunit significantly decreases dendritic growth in maturing dentate granule neurons.

    Directory of Open Access Journals (Sweden)

    Timal S Kannangara

    Full Text Available It is known that NMDA receptors can modulate adult hippocampal neurogenesis, but the contribution of specific regulatory GluN2 subunits has been difficult to determine. Here we demonstrate that mice lacking GluN2A (formerly NR2A do not show altered cell proliferation or neuronal differentiation, but present significant changes in neuronal morphology in dentate granule cells. Specifically, GluN2A deletion significantly decreased total dendritic length and dendritic complexity in DG neurons located in the inner granular zone. Furthermore, the absence of GluN2A also resulted in a localized increase in spine density in the middle molecular layer, a region innervated by the medial perforant path. Interestingly, alterations in dendritic morphology and spine density were never seen in dentate granule cells located in the outer granular zone, a region that has been hypothesized to contain older, more mature, neurons. These results indicate that although the GluN2A subunit is not critical for the cell proliferation and differentiation stages of the neurogenic process, it does appear to play a role in establishing synaptic and dendritic morphology in maturing dentate granule cells localized in the inner granular zone.

  13. Riluzole enhances expression of brain-derived neurotrophic factor with consequent proliferation of granule precursor cells in the rat hippocampus.

    Science.gov (United States)

    Katoh-Semba, Ritsuko; Asano, Tomiko; Ueda, Hiroshi; Morishita, Rika; Takeuchi, Ikuo K; Inaguma, Yutaka; Kato, Kanefusa

    2002-08-01

    The dentate gyrus of the hippocampus, generating new cells throughout life, is essential for normal recognition memory performance. Reduction of brain-derived neurotrophic factor (BDNF) in this structure impairs its functions. To elucidate the association between BDNF levels and hippocampal neurogenesis, we first conducted a search for compounds that stimulate endogenous BDNF production in hippocampal granule neurons. Among ion channel modulators tested, riluzole, a neuroprotective agent with anticonvulsant properties that is approved for treatment of amyotrophic lateral sclerosis, was highly effective as a single dose by an intraperitoneal injection, causing a rise in BDNF localized in dentate granule neurons, the hilus, and the stratum radiatum of the CA3 region. Repeated, but not single, injections resulted in prolonged elevation of hippocampal BDNF and were associated with increased numbers of newly generated cells in the granule cell layer. This appeared due to promoted proliferation rather than survival of precursor cells, many of which differentiated into neurons. Intraventricular administration of BDNF-specific antibodies blocked such riluzole effects, suggesting that BDNF increase is necessary for the promotion of precursor proliferation. Our results suggest the basis for a new strategy for treatment of memory dysfunction.

  14. Tracing CD34+ Stromal Fibroblasts in Palatal Mucosa and Periodontal Granulation Tissue as a Possible Cell Reservoir for Periodontal Regeneration.

    Science.gov (United States)

    Roman, Alexandra; Páll, Emőke; Mihu, Carmen M; Petruţiu, Adrian S; Barbu-Tudoran, Lucian; Câmpian, Radu S; Florea, Adrian; Georgiu, Carmen

    2015-08-01

    The aim of the present research was to trace CD34+ stromal fibroblastic cells (CD34+ SFCs) in the palatal connective tissue harvested for muco-gingival surgical procedures and in granulation tissues from periodontal pockets using immunohistochemical and transmission electron microscopy. Immunohistochemical analysis targeted the presence of three antigens: CD31, α-smooth muscle actin (α-SMA), and CD34. In the palate, CD31 staining revealed a colored inner ring of the vessels representing the endothelium, α-SMA+ was located in the medial layer of the vasculature, and CD34 was intensely expressed by endothelial cells and artery adventitial cells (considered to be CD34+ SFCs). Granulation tissue showed the same pattern for CD31+ and α-SMA, but a different staining pattern for CD34. Ultrastructural examination of the palatal tissue highlighted perivascular cells with fibroblast-like characteristics and pericytes in close spatial relationship to endothelial cells. The ultrastructural evaluation of granulation tissue sections confirmed the presence of neovasculature and the inflammatory nature of this tissue. The present study traced the presence of CD34+ SFCs and of pericytes in the palatal connective tissue thus highlighting once more its intrinsic regenerative capabilities. The clinical and systemic factors triggering mobilization and influencing the fate of local CD34+SCFs and other progenitors are issues to be further investigated.

  15. The development of a growth regime map for a novel reverse-phase wet granulation process.

    Science.gov (United States)

    Wade, Jonathan B; Martin, Gary P; Long, David F

    2016-10-15

    The feasibility of a novel reverse-phase wet granulation process has been established and potential advantages identified. Granule growth in the reverse-phase process proceeds via a steady state growth mechanism controlled by capillary forces, whereas granule growth in the conventional process proceeds via an induction growth regime controlled by viscous forces. The resultant reverse-phase granules generally have greater mass mean diameter and lower intragranular porosity when compared to conventional granules prepared under the same liquid saturation and impeller speed conditions indicating the two processes may be operating under different growth regimes. Given the observed differences in growth mechanism and consolidation behaviour of the reverse-phase and conventional granules the applicability of the current conventional granulation regime map is unclear. The aim of the present study was therefore to construct and evaluate a growth regime map, which depicts the regime as a function of liquid saturation and Stokes deformation number, for the reverse-phase granulation process. Stokes deformation number was shown to be a good predictor of both granule mass mean diameter and intragranular porosity over a wide range of process conditions. The data presented support the hypothesis that reverse-phase granules have a greater amount of surface liquid present which can dissipate collision energy and resist granule rebound resulting in the greater granule growth observed. As a result the reverse-phase granulation process results in a greater degree of granule consolidation than that produced using the conventional granulation process. Stokes deformation number was capable of differentiating these differences in the granulation process.

  16. External-field-free magnetic biosensor

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yuanpeng; Wang, Yi; Klein, Todd; Wang, Jian-Ping, E-mail: jpwang@umn.edu [Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

    2014-03-24

    In this paper, we report a magnetic nanoparticle (MNP) detection scheme without the presence of any external magnetic field. The proposed magnetic sensor uses a patterned groove structure within the sensor so that no external magnetic field is needed to magnetize the MNPs. An example is given based on a giant magnetoresistance (GMR) sensing device with a spin valve structure. For this structure, the detection of MNPs located inside the groove and near the free layer is demonstrated under no external magnetic field. Micromagnetic simulations are performed to calculate the signal to noise level of this detection scheme. A maximum signal to noise ratio (SNR) of 18.6 dB from one iron oxide magnetic nanoparticle with 8 nm radius is achieved. As proof of concept, this external-field-free GMR sensor with groove structure of 200 nm × 200 nm is fabricated using a photo and an electron beam integrated lithography process. Using this sensor, the feasibility demonstration of the detection SNR of 9.3 dB is achieved for 30 μl magnetic nanoparticles suspension (30 nm iron oxide particles, 1 mg/ml). This proposed external-field-free sensor structure is not limited to GMR devices and could be applicable to other magnetic biosensing devices.

  17. Discrete element modelling of fluidised bed spray granulation

    NARCIS (Netherlands)

    Goldschmidt, M.J.V.; Weijers, G.G.C.; Boerefijn, R.; Kuipers, J.A.M.

    2003-01-01

    A novel discrete element spray granulation model capturing the key features of fluidised bed hydrodynamics, liquid¿solid contacting and agglomeration is presented. The model computes the motion of every individual particle and droplet in the system, considering the gas phase as a continuum. Microsca

  18. Discrete element modelling of fluidised bed spray granulation

    NARCIS (Netherlands)

    Goldschmidt, M.J.V.; Weijers, G.G.C.; Boerefijn, R.; Kuipers, J.A.M.

    2002-01-01

    A novel discrete element spray granulation model capturing the key features of fluidised bed hydrodynamics, liquid-solid contacting and agglomeration is presented. The model computes the motion of every individual particle and droplet in the system, considering the gas phase as a continuum. Micro sc

  19. Arachnoid granules: Dandy was Dandy, Cushing and Weed were not.

    Science.gov (United States)

    Maurizi, Charles P

    2010-08-01

    Errors can be instructive. It seems that Harvey Cushing and Louis Weed provided the medical world with a faulty theory of cerebrospinal fluid absorption. Louis Weed, working in Harvey Cushing's laboratory, initially studied the movement of substances in the cerebrospinal fluid by using low-pressure studies. Results of the low-pressure studies were considered unsatisfactory and high pressure experiments were undertaken and these had results similar to earlier work done by others in human cadavers. High pressure results demonstrating movement of fluid through the arachnoid granules were deemed correct. Because of Cushing's position of authority, the theory became accepted as fact and in time proved to be entrenched dogma. Walter Dandy demonstrated in experiments on hydrocephalus and the surgical removal of the arachnoid granule system that the fluid was produced by the choroid plexuses and not absorbed by the arachnoid granules. His work was dismissed by Weed as unreliable. Examination of the pattern of deposition of corpora amylacea on the surface of the brain provides evidence that cerebrospinal fluid does not pass through arachnoid granules but passes through the choroid fissure and is recycled through choroid plexus portals. The choroid plexus portal theory can explain the findings in the low-pressure experiments of Weed. Bias and pride seem to be the source of the faulty theory. Entrenched dogma is resistant to challenge.

  20. F-Granulation Generalized Rough Entropy and Image Analysis

    Science.gov (United States)

    Pal, Sankar K.

    2012-12-01

    Role of f-granulation in handling uncertainty in machine intelligence and its significance as a facet of natural computation are discussed. Its modeling through judicious integration of rough and fuzzy sets is explained. Several tasks like case generation, clustering, classification and segmentation are described in rough-fuzzy framework demonstrating the role of f-granulation and the resulting merits. A definition of generalized rough sets is given considering both the set and granules as crisp and/or fuzzy. Based on that new entropy measures are defined using exponential and logarithmic gain functions. The superiority of rough-fuzzy integration, in terms of performance and computation time, is illustrated for the tasks of case mining in large data sets, segmenting brain MR images, and classifying remotely sensed images as examples. Neighbourhood rough sets are capable of better dimensionality reduction. The effect of fuzzy-granules and generalizations in rough sets is demonstrated for image segmentation. The article includes some of the results published elsewhere.

  1. Mechanisms underlying the beneficial effects of Kaiyu Granule for depression

    Institute of Scientific and Technical Information of China (English)

    Xi Jin; Yidan Zhang; Qiaoying Li; Jianjun Zhao

    2013-01-01

    The proprietary Chinese medicine preparation Kaiyu Granule is made of bupleurum, nutgrass ga-lingale rhizome, szechwan lovage rhizome, turmeric root tuber, white peony alba, cape jasmine fruit, fried semen ziziphi jujubae, and prepared liquorice root. It is a common recipe for the clinical treatment of depression in China. In this study, after 21 days of unpredictable stress exposure, Wistar rats exhibited similar behavioral changes to patients with depression. Moreover, G-protein-coupled inwardly rectifying K+channel 1 mRNA and protein expression were significantly reduced in rat hippocampal CA1 and CA3 regions. However, G-protein-coupled inwardly rectifying K+channel 1 mRNA, protein expression, and rat behavior were clearly better after administration of 12, 8, or 4 g/kg of Kaiyu Granule when depression model rats underwent stress. 12 g/kg of Kaiyu Granule had the most obvious effects on the increased expression of G-protein-coupled inwardly rectifying K+channel 1 mRNA and protein in rat hippocampal CA1 and CA3 regions. These results suggested that Kaiyu Granule improved depression by affecting G-protein-coupled inwardly fying K+channel 1 expression in the rat hippocampus.

  2. Spontaneous calcium waves in granule cells in cerebellar slice cultures

    DEFF Research Database (Denmark)

    Apuschkin, Mia; Ougaard, Maria; Rekling, Jens C

    2013-01-01

    and establishment of synaptic transmission. Here, we used calcium imaging in slice cultures of the postnatal cerebellum, and observe spontaneous propagating calcium waves in NeuN-positive granule-like cells. Wave formation was blocked by TTX and the AMPA antagonist NBQX, but persisted after NMDA receptor blockade...

  3. Block-based approach to modelling of granulated fertilizers' quality

    DEFF Research Database (Denmark)

    Kohonen, J.; Reinikainen, S. P.; Høskuldsson, Agnar

    2009-01-01

    Fertilizer manufacturing is a customer-driven industry, where the quality of a product is a key factor in order to survive the competition. However, measuring the most important feature with granulated fertilizers, flowability, is tedious, time-consuming and thus expensive. Flowability can...

  4. Formulation and evaluation of bilayer tablet by using melt granulation technique for treatment of diabetes mellitus.

    Science.gov (United States)

    Patel, Dhruvita; Patel, Ankita; Solanki, Trupti

    2012-03-01

    The objective of present study was to prepare and characterize Bilayer tablet formulation containing Metformin HCl in extended release matrix form and Pioglitazone HCl in immediate release form for the treatment of diabetes mellitus. Different formulations containing Metformin HCl were manufactured using 3(2) factorial designs. Influence of hydrophilic carrier, hydrophobic polymer on drug release was studied. Immediate release layer of Pioglitazone was optimized using different super disintegrants. All formulations were evaluated for percentage drug release. Optimization results indicated that release rate of Metformin is directly proportional to the levels of Eudragit S 100 and PEG 6000. Results confirmed that Bilayer tablet formulation containing extended release of Metformin HCl and immediate release of Pioglitazone HCl could be developed by using melt granulation technique.

  5. Comparison of torque measurements and near-infrared spectroscopy in characterization of a wet granulation process

    DEFF Research Database (Denmark)

    Jørgensen, Anna Cecilia; Luukkonen, Pirjo; Rantanen, Jukka

    2004-01-01

    The purpose of this study was to compare impeller torque measurements and near-infrared (NIR) spectroscopy in the characterization of the water addition phase of a wet granulation process. Additionally, the effect of hydrate formation during granulation on the impeller torque was investigated...... to process monitoring of wet granulation, also in cases where monitoring of impeller torque is difficult to apply....

  6. A model for the spray zone in early-stage fluidized bed granulation

    NARCIS (Netherlands)

    Schaafsma, S. H.; Vonk, P.; Kossen, N. W. F.; Hoffmann, A. C.

    2006-01-01

    The formation of granules in the spray zone of a top-spray fluid-bed granulation process using a known and uniform drop-size is studied experimentally and theoretically. Experimental results indicate a multi-modal size distribution of spherically-shaped granules. A model is presented to explain this

  7. Comparison of four enhancement strategies for aerobic granulation in sequencing batch reactors.

    Science.gov (United States)

    Gao, Dawen; Liu, Lin; Liang, Hong; Wu, Wei-Min

    2011-02-15

    Aerobic granules were developed in four identical sequencing batch reactors (SBRs) with synthetic wastewater to compare different strategies for the enhancement of granulation. The SBRs were operated by (a) increasing organic loading rate in R1; (b) reducing settling time in R2; (c) extending starvation period in R3; and (d) increasing shear force in R4. The results showed that four operational strategies were able to enhance aerobic granulation successfully in SBR, but that also showed different effect on the granulation process and characteristics of mature aerobic granules. The rapidest granulation was observed by using short settling time (R2) and the granules had higher extracellular polymeric substance (EPS) than other reactors. Extended starvation period (R3) and high shear force (R4) resulted in longer granulation period and the granules with higher integrity and smaller size. Higher organic loading rate (R1) resulted in the granules with larger size and higher K value. The maximum specific COD removal rates (q(max)) of the granules in all SBRs were at a similar level (0.13-0.16 g COD/h-g VSS) but the granules in R1 and R2 had higher apparent half rate constant (K) of 18 and 16 mg/L, than those in R3 and R4 (2.8 and 3.3 mg/L).

  8. Comparison of four enhancement strategies for aerobic granulation in sequencing batch reactors

    Energy Technology Data Exchange (ETDEWEB)

    Gao Dawen, E-mail: dawengao@gmail.com [School of Forestry, Northeast Forestry University, Harbin 150040 (China); State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090 (China); Liu Lin; Liang Hong [School of Forestry, Northeast Forestry University, Harbin 150040 (China); Wu Weimin [Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94305-4020 (United States)

    2011-02-15

    Aerobic granules were developed in four identical sequencing batch reactors (SBRs) with synthetic wastewater to compare different strategies for the enhancement of granulation. The SBRs were operated by (a) increasing organic loading rate in R1; (b) reducing settling time in R2; (c) extending starvation period in R3; and (d) increasing shear force in R4. The results showed that four operational strategies were able to enhance aerobic granulation successfully in SBR, but that also showed different effect on the granulation process and characteristics of mature aerobic granules. The rapidest granulation was observed by using short settling time (R2) and the granules had higher extracellular polymeric substance (EPS) than other reactors. Extended starvation period (R3) and high shear force (R4) resulted in longer granulation period and the granules with higher integrity and smaller size. Higher organic loading rate (R1) resulted in the granules with larger size and higher K value. The maximum specific COD removal rates (q{sub max}) of the granules in all SBRs were at a similar level (0.13-0.16 g COD/h-g VSS) but the granules in R1 and R2 had higher apparent half rate constant (K) of 18 and 16 mg/L, than those in R3 and R4 (2.8 and 3.3 mg/L).

  9. TABLETING PROPERTIES OF EXPERIMENTAL AND COMMERCIALLY AVAILABLE LACTOSE GRANULATIONS FOR DIRECT COMPRESSION

    NARCIS (Netherlands)

    BOLHUIS, GK; ZUURMAN, K

    1995-01-01

    Lactose granulations (125-250 mu m) were prepared from two different alpha-lactose monohydrate powders and one roller dried beta-lactose powder respectively, by wet granulation with only water as a binder. As an effect of the granulation process, the flow properties improved, but the compactibility

  10. Morphology, structure and gelatinization properties of heterogeneous starch granules from high-amylose maize.

    Science.gov (United States)

    Cai, Canhui; Zhao, Lingxiao; Huang, Jun; Chen, Yifang; Wei, Cunxu

    2014-02-15

    High-amylose cereal endosperm is rich in heterogeneous starch granules. In this paper, we investigated the morphology, structure and gelatinization properties of high-amylose maize endosperm starch. Starch had individual, aggregate and elongated heterogeneous granules. Most of individual granules were round with small size and had one central hilum. Aggregate and elongated granules consisted of many subgranules with central hila, and had irregular and rod/filamentous shapes, respectively. Iodine stained starch granules showed five types of polarization colors: blue, purple, fuchsia, dark red, and interior dark blue and exterior brown. Most of individual and aggregate granules had the color of dark red, that of elongated granules the color of interior dark blue and exterior brown. Amylose was mainly distributed in the hilum region and the circumference of starch granules. Aggregate and elongated granules had higher amylose content than individual granules. Elongated and individual granules had the highest and the lowest gelatinization resistance among high-amylose maize heterogeneous starch granules, respectively. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Spray freeze granulation of submicron alumina and its sintering behavior via spark plasma sintering

    Directory of Open Access Journals (Sweden)

    Liu Wei

    2015-01-01

    Full Text Available Spray freeze granulation is an improved method based on spray granulation, solving many limitations of spray granulation. In this work, spray freeze granulation of submicron alumina is performed to explore the possibility of industrial-scale production of dense alumina via spark plasma sintering. Powder pretreatment such as sedimentation and the selection of granules with the appropriate size are employed for the maximum use of the high qualified as-prepared granules and granule sliding, which would provide a guidance for the industrial-scale production. Debound granules were densified via SPS and the corresponding sintering behaviors such as the recorded shrinkage and shrinkage rate were discussed. The comparison of sintering behaviors between granulated and as-received powder are conducted to identify the role of spray freeze granulation in sinterability for dense alumina. The Vickers hardness (Hv and the fracture toughness (KIC of the freeze granulated body are higher than the corresponding properties of the as-received body due to the more homogenous microstructure with little agglomeration in the particle packing after freeze granulation.

  12. File list: ALL.Neu.20.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.Neu.20.AllAg.Cerebellar_granule_neurons mm9 All antigens Neural Cerebellar granule neuro...ns SRX685885,SRX685882,SRX685880 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.Neu.20.AllAg.Cerebellar_granule_neurons.bed ...

  13. File list: Oth.Neu.10.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.Neu.10.AllAg.Cerebellar_granule_neurons mm9 TFs and others Neural Cerebellar granule neuro...ns http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.Neu.10.AllAg.Cerebellar_granule_neurons.bed ...

  14. File list: Oth.Neu.50.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.Neu.50.AllAg.Cerebellar_granule_neurons mm9 TFs and others Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.Neu.50.AllAg.Cerebellar_granule_neurons.bed ...

  15. File list: Pol.Neu.10.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.Neu.10.AllAg.Cerebellar_granule_neurons mm9 RNA polymerase Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.Neu.10.AllAg.Cerebellar_granule_neurons.bed ...

  16. File list: Oth.Neu.20.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.Neu.20.AllAg.Cerebellar_granule_neurons mm9 TFs and others Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.Neu.20.AllAg.Cerebellar_granule_neurons.bed ...

  17. File list: DNS.Neu.10.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.Neu.10.AllAg.Cerebellar_granule_neurons mm9 DNase-seq Neural Cerebellar granule neurons... SRX685882,SRX685880,SRX685883,SRX685885,SRX685877,SRX685878 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.Neu.10.AllAg.Cerebellar_granule_neurons.bed ...

  18. File list: DNS.Neu.20.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.Neu.20.AllAg.Cerebellar_granule_neurons mm9 DNase-seq Neural Cerebellar granule neurons... SRX685885,SRX685882,SRX685880 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.Neu.20.AllAg.Cerebellar_granule_neurons.bed ...

  19. File list: Unc.Neu.05.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.Neu.05.AllAg.Cerebellar_granule_neurons mm9 Unclassified Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.Neu.05.AllAg.Cerebellar_granule_neurons.bed ...

  20. File list: His.Neu.05.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.Neu.05.AllAg.Cerebellar_granule_neurons mm9 Histone Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.Neu.05.AllAg.Cerebellar_granule_neurons.bed ...

  1. File list: ALL.Neu.50.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.Neu.50.AllAg.Cerebellar_granule_neurons mm9 All antigens Neural Cerebellar granule neurons... SRX685885,SRX685882,SRX685880 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.Neu.50.AllAg.Cerebellar_granule_neurons.bed ...

  2. File list: ALL.Neu.10.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.Neu.10.AllAg.Cerebellar_granule_neurons mm9 All antigens Neural Cerebellar granule neurons... SRX685882,SRX685880,SRX685883,SRX685885,SRX685877,SRX685878 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.Neu.10.AllAg.Cerebellar_granule_neurons.bed ...

  3. File list: His.Neu.10.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.Neu.10.AllAg.Cerebellar_granule_neurons mm9 Histone Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.Neu.10.AllAg.Cerebellar_granule_neurons.bed ...

  4. File list: Pol.Neu.50.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.Neu.50.AllAg.Cerebellar_granule_neurons mm9 RNA polymerase Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.Neu.50.AllAg.Cerebellar_granule_neurons.bed ...

  5. File list: DNS.Neu.05.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.Neu.05.AllAg.Cerebellar_granule_neurons mm9 DNase-seq Neural Cerebellar granule neurons... SRX685885,SRX685878,SRX685882,SRX685877,SRX685880,SRX685883 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.Neu.05.AllAg.Cerebellar_granule_neurons.bed ...

  6. File list: His.Neu.20.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.Neu.20.AllAg.Cerebellar_granule_neurons mm9 Histone Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.Neu.20.AllAg.Cerebellar_granule_neurons.bed ...

  7. File list: ALL.Neu.05.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.Neu.05.AllAg.Cerebellar_granule_neurons mm9 All antigens Neural Cerebellar granule neurons... SRX685885,SRX685878,SRX685882,SRX685877,SRX685880,SRX685883 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.Neu.05.AllAg.Cerebellar_granule_neurons.bed ...

  8. File list: DNS.Neu.50.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.Neu.50.AllAg.Cerebellar_granule_neurons mm9 DNase-seq Neural Cerebellar granule neurons... SRX685885,SRX685882,SRX685880 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.Neu.50.AllAg.Cerebellar_granule_neurons.bed ...

  9. File list: His.Neu.50.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.Neu.50.AllAg.Cerebellar_granule_neurons mm9 Histone Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.Neu.50.AllAg.Cerebellar_granule_neurons.bed ...

  10. File list: Pol.Neu.20.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.Neu.20.AllAg.Cerebellar_granule_neurons mm9 RNA polymerase Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.Neu.20.AllAg.Cerebellar_granule_neurons.bed ...

  11. File list: Unc.Neu.10.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.Neu.10.AllAg.Cerebellar_granule_neurons mm9 Unclassified Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.Neu.10.AllAg.Cerebellar_granule_neurons.bed ...

  12. File list: Unc.Neu.50.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.Neu.50.AllAg.Cerebellar_granule_neurons mm9 Unclassified Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.Neu.50.AllAg.Cerebellar_granule_neurons.bed ...

  13. File list: Unc.Neu.20.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.Neu.20.AllAg.Cerebellar_granule_neurons mm9 Unclassified Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.Neu.20.AllAg.Cerebellar_granule_neurons.bed ...

  14. File list: Oth.Neu.05.AllAg.Cerebellar_granule_neurons [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.Neu.05.AllAg.Cerebellar_granule_neurons mm9 TFs and others Neural Cerebellar granule neurons... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.Neu.05.AllAg.Cerebellar_granule_neurons.bed ...

  15. ExternE transport methodology for external cost evaluation of air pollution

    DEFF Research Database (Denmark)

    Jensen, S. S.; Berkowicz, R.; Brandt, J.

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summaris...

  16. The External Mind

    DEFF Research Database (Denmark)

    The External Mind: an Introduction by Riccardo Fusaroli, Claudio Paolucci pp. 3-31 The sign of the Hand: Symbolic Practices and the Extended Mind by Massimiliano Cappuccio, Michael Wheeler pp. 33-55 The Overextended Mind by Shaun Gallagher pp. 57-68 The "External Mind": Semiotics, Pragmatism......, Extended Mind and Distributed Cognition by Claudio Paolucci pp. 69-96 The Social Horizon of Embodied Language and Material Symbols by Riccardo Fusaroli pp. 97-123 Semiotics and Theories of Situated/Distributed Action and Cognition: a Dialogue and Many Intersections by Tommaso Granelli pp. 125-167 Building...... Action in Public Environments with Diverse Semiotic Resources by Charles Goodwin pp. 169-182 How Marking in Dance Constitutes Thinking with the Body by David Kirsh pp. 183-214 Ambiguous Coordination: Collaboration in Informal Science Education Research by Ivan Rosero, Robert Lecusay, Michael Cole pp. 215-240...

  17. External-Memory Multimaps

    CERN Document Server

    Angelino, Elaine; Mitzenmacher, Michael; Thaler, Justin

    2011-01-01

    Many data structures support dictionaries, also known as maps or associative arrays, which store and manage a set of key-value pairs. A \\emph{multimap} is generalization that allows multiple values to be associated with the same key. For example, the inverted file data structure that is used prevalently in the infrastructure supporting search engines is a type of multimap, where words are used as keys and document pointers are used as values. We study the multimap abstract data type and how it can be implemented efficiently online in external memory frameworks, with constant expected I/O performance. The key technique used to achieve our results is a combination of cuckoo hashing using buckets that hold multiple items with a multiqueue implementation to cope with varying numbers of values per key. Our external-memory results are for the standard two-level memory model.

  18. GRANULATION AND BRIQUETTING OF SOLID PRODUCTS FROM FLUE GAS DESULFURIZATION

    Directory of Open Access Journals (Sweden)

    Jan J. Hycnar

    2015-11-01

    Full Text Available Most flue gas desulfurization products can be characterized by significant solubility in water and dusting in dry state. These characteristics can cause a considerable pollution of air, water, and soil. Among many approaches to utilization of this waste, the process of agglomeration using granulation or briquetting has proved very effective. Using desulfurization products a new material of aggregate characteristics has been acquired, and this material is resistant to water and wind erosion as well as to the conditions of transportation and storage. The paper presents the results of industrial trials granulation and briquetting of calcium desulphurization products. The granulation of a mixture of phosphogypsum used with fly ash (in the share 1:5. The resulting granules characterized by a compressive strength of 41.6 MPa, the damping resistance of 70% and 14.2% abrasion. The granulate was used for the production of cement mix. The produced concrete mortar have a longer setting and hardening time, as compared to the traditional ash and gypsum mortar, and have a higher or comparable flexural and compressive strength during hardening. Briquetting trials made of a product called synthetic gypsum or rea-gypsum both in pure form and with the addition of 5% and 10% of the limestone dust. Briquettes have a high initial strength and resistance to abrasion. The values ​​of these parameters increased after 72 hours of seasoning. It was found that higher hardiness of briquettes with rea-gypsum was obtained with the impact of atmospheric conditions and higher resistance to elution of water-soluble components in comparison to ash briquettes.

  19. Clarithromycin highly-loaded gastro-floating fine granules prepared by high-shear melt granulation can enhance the efficacy of Helicobacter pylori eradication.

    Science.gov (United States)

    Aoki, Hajime; Iwao, Yasunori; Mizoguchi, Midori; Noguchi, Shuji; Itai, Shigeru

    2015-05-01

    In an effort to develop a new gastro-retentive drug delivery system (GRDDS) without a large amount of additives, 75% clarithromycin (CAM) loaded fine granules were prepared with three different hydrophobic binders by high-shear melt granulation and their properties were evaluated. Granules containing the higher hydrophobic binder showed sustained drug release and were able to float over 24h. The synchrotron X-ray CT measurement indicated that both the high hydrophobicity of the binder and the void space inside the granules might be involved in their buoyancy. In an in vivo experiment, the floating granules more effectively eradicated Helicobacter pylori than a CAM suspension by remaining in the stomach for a longer period. In short, CAM highly-loaded gastro-floating fine granules can enhance the eradication efficiency of H. pylori compared with CAM alone. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Degenerative and regenerative changes in epidermal organ culture: a morphological study with reference to membrane-coating granules.

    Science.gov (United States)

    Chapman, S J; Vickers, C F

    1988-11-01

    Membrane-coating granules (MCG) are poorly understood lamellate organelles unique to keratinized epithelia. This study provides data on a skin model for future in vitro investigations of MCG. Porcine ear epidermal organ cultures were used under standard cell culture conditions. This system was selected because it is easily established and, following a degenerative period in which MCG are lost, regenerates to form a highly differentiated epidermis. The epidermis appeared healthy during the first 2 d in vitro and contained MCG but lost keratohyalin granules (KHG). Overt degenerative changes were evident in the upper epidermis on Day 3, and MCG were now bloated. By Day 4 only one to three layers of viable undifferentiated cells remained. In the overlying necrotic epidermis MCG were rare, presumably due to the bursting of bloated MCG. Epidermal regeneration began around Day 5 and by Day 7 there were 8 to 13 layers, including a rudimentary parakeratotic stratum corneum (up to 4 layers). The stratum granulosum (two to three layers) now contained immature KHG and poorly lamellate MCG, but only amorphous material extracellularly. By Day 11 there were three to four layers of granular cells as in vivo, and an orthokeratotic stratum corneum (two to four layers). Improved cornification coincided with an increased number of mature KHG and cross-banded MCG, and lamellate MCG contents extracellularly. This model of epidermal regeneration will facilitate studies into the role played by MCG in keratinization because the epithelium initially lacked MCG but later expressed all the major morphologic features of epidermis. Furthermore the mechanisms by which MCG translocation and extrusion are effected may be probed by the inclusion of such agents as antimicrotubular drugs and calcium ionophores.

  1. THE FACTORS FORMING QUALITY OF GRANULATED SUGAR

    Directory of Open Access Journals (Sweden)

    N. G. Kulneva

    2015-01-01

    Full Text Available Sugar, with good taste and high caloric, is one of the most popular human food. Consumers sugar must be sure that the sugar under normal conditions of use is of high quality and is not harmful to the health of the product. One reason for the decline in the quality of sugar is bacterial contamination. This is because the sugar industry products are good targets for the development of different groups of microorganisms, e.g., Bacillus subtilis, Clostridium perfringes, Leuconostoc dextranicum, Torula alba, Pseudomonas fluorescens, Sarcina lutea and others. These organisms are affected with beets, and then with sugar beet chips and diffusion juice fall into the processing line of sugar production. Their number in the diffusion juice varies and depends on many facto rs such as the quality of raw materials, the quality of cleaning beet root colonization of transporter-washing and the supply of water to the diffusion process, the temperature of the diffusion and others. In the diffusion unit has the most favorable conditions for the development of micro-organisms. Some of them, especially resistant bacteria and thermophilic bacteria or their spores, forming a capsule which protects against external influences occur in the final product sugar. When injected into the fresh crop of product (juice, syrup, they begin to multiply rapidly, causing difficulties in the process. The higher seeding beet microorganisms, the more they decompose and emit sucrose metabolism byproducts. To reduce the negative impact of microbiological and reduce losses from decomposition of sucrose conducted research on the possibility of using chlorine-containing substances in the sugar industry. It was established experimentally that the investigated chlorinated drug has bacteriostatic action and can be recommended for use in sugar beet production.

  2. The brain-specific RasGEF very-KIND is required for normal dendritic growth in cerebellar granule cells and proper motor coordination

    Science.gov (United States)

    Hayashi, Kanehiro; Furuya, Asako; Sakamaki, Yuriko; Akagi, Takumi; Shinoda, Yo; Sadakata, Tetsushi; Hashikawa, Tsutomu; Shimizu, Kazuki; Minami, Haruka; Sano, Yoshitake; Nakayama, Manabu

    2017-01-01

    Very-KIND/Kndc1/KIAA1768 (v-KIND) is a brain-specific Ras guanine nucleotide exchange factor carrying two sets of the kinase non-catalytic C-lobe domain (KIND), and is predominantly expressed in cerebellar granule cells. Here, we report the impact of v-KIND deficiency on dendritic and synaptic growth in cerebellar granule cells in v-KIND knockout (KO) mice. Furthermore, we evaluate motor function in these animals. The gross anatomy of the cerebellum, including the cerebellar lobules, layered cerebellar cortex and densely-packed granule cell layer, in KO mice appeared normal, and was similar to wild-type (WT) mice. However, KO mice displayed an overgrowth of cerebellar granule cell dendrites, compared with WT mice, resulting in an increased number of dendrites, dendritic branches and terminals. Immunoreactivity for vGluT2 (a marker for excitatory presynapses of mossy fiber terminals) was increased in the cerebellar glomeruli of KO mice, compared with WT mice. The postsynaptic density around the terminals of mossy fibers was also increased in KO mice. Although there were no significant differences in locomotor ability between KO and WT animals in their home cages or in the open field, young adult KO mice had an increased grip strength and a tendency to exhibit better motor performance in balance-related tests compared with WT animals. Taken together, our results suggest that v-KIND is required for compact dendritic growth and proper excitatory synaptic connections in cerebellar granule cells, which are necessary for normal motor coordination and balance. PMID:28264072

  3. Preparation and in vitro evaluation of guar gum based triple-layer matrix tablet of diclofenac sodium.

    Science.gov (United States)

    Chavda, H V; Patel, M S; Patel, C N

    2012-01-01

    The objective of the present study was to design an oral controlled drug delivery system for sparingly soluble diclofenac sodium (DCL) using guar gum as triple-layer matrix tablets. Matrix tablet granules containing 30% (D1), 40% (D2) or 50% (D3) of guar gum were prepared by the conventional wet granulation technique. Matrix tablets of diclofenac sodium were prepared by compressing three layers one by one. Centre layer of sandwich like structure was incorporated with matrix granules containing DCL which was covered on either side by guar gum granule layers containing either 70, 80 or 87% of guar gum as release retardant layers. The tablets were evaluated for hardness, thickness, drug content, and drug release studies. To ascertain the kinetics of drug release, the dissolution profiles were fitted to various mathematical models. The in vitro drug release from proposed system was best explained by the Hopfenberg model indicating that the release of drug from tablets displayed heterogeneous erosion. D3G3, containing 87% of guar gum in guar gum layers and 50% of guar gum in DCL matrix granule layer was found to provide the release rate for prolonged period of time. The results clearly indicate that guar gum could be a potential hydrophilic carrier in the development of oral controlled drug delivery systems.

  4. Fine granules showing sustained drug release prepared by high-shear melt granulation using triglycerin full behenate and milled microcrystalline cellulose.

    Science.gov (United States)

    Aoki, Hajime; Iwao, Yasunori; Uchimoto, Takeaki; Noguchi, Shuji; Kajihara, Ryusuke; Takahashi, Kana; Ishida, Masayuki; Terada, Yasuko; Suzuki, Yoshio; Itai, Shigeru

    2015-01-30

    This study aimed to prepare fine granules with a diameter less than 200μm and sustained drug release properties by melt granulation. Triglycerin full behenate (TR-FB) was examined as a new meltable binder (MB) by comparison of its properties with those of glycerin monostearate (GM), widely used as MB. The effect of milling microcrystalline cellulose (MCC), an excipient for melt granulation, on the granule properties was also investigated. TR-FB was more stable during heating and storage than GM, and produced smaller granules with narrower particle size distribution, larger yield in the 106-200μm range, uniform roundness and better sustained drug release profile than those prepared with GM. Granules prepared with milled MCC had almost the same physicochemical properties as those produced with intact MCC. However, milled MCC produced granules with a more rigid structure and smaller void space than intact MCC. Consequently, the granules produced with milled MCC showed better sustained drug release behavior than those prepared with intact MCC. We successfully prepared fine granules with sustained drug release properties and diameter of less than 200μm using TR-FB and milled MCC. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Correlated changes in structure and viscosity during gelatinization and gelation of tapioca starch granules

    Directory of Open Access Journals (Sweden)

    Hsien-Kai Huang

    2014-11-01

    Full Text Available Melting of native tapioca starch granules in aqueous pastes upon heating is observed in situ using simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS and solution viscometry. Correlated structure and viscosity changes suggest closely associated amylose and amylopectin chains in the semicrystalline layers, and the release of amylose chains for enhanced solution viscosity occurs largely after melting of the semicrystalline structure. Before melting, WAXS results reveal mixed crystals of A- and B-types (∼4:1 by weight, whereas SAXS results indicate that the semicrystalline layers are composed of lamellar blocklets of ca 43 nm domain size, with polydisperse crystalline (≃7.5 nm and amorphous (≃1.1 nm layers alternatively assembled into a lamellar spacing of ≃8.6 nm with 20% polydispersity. Upon melting, the semicrystalline lamellae disintegrate into disperse and molten amylopectin nanoclusters with dissolved and partially untangled amylose chains in the aqueous matrix which leads to increased solution viscosity. During subsequent cooling, gelation starts at around 347 K; successively increased solution viscosity coincides with the development of nanocluster aggregation to a fractal dimension ≃2.3 at 303 K, signifying increasing intercluster association through collapsed amylose chains owing to decreased solvency of the aqueous medium with decreasing temperature.

  6. Correlated changes in structure and viscosity during gelatinization and gelation of tapioca starch granules.

    Science.gov (United States)

    Huang, Hsien-Kai; Sheu, Hwo-Shuenn; Chuang, Wei-Tsung; Jeng, U-Ser; Su, An-Chung; Wu, Wei-Ru; Liao, Kuei-Fen; Chen, Chun-Yu; Chang, Shing-Yun; Lai, Hsi-Mei

    2014-11-01

    Melting of native tapioca starch granules in aqueous pastes upon heating is observed in situ using simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS) and solution viscometry. Correlated structure and viscosity changes suggest closely associated amylose and amylopectin chains in the semicrystalline layers, and the release of amylose chains for enhanced solution viscosity occurs largely after melting of the semicrystalline structure. Before melting, WAXS results reveal mixed crystals of A- and B-types (∼4:1 by weight), whereas SAXS results indicate that the semicrystalline layers are composed of lamellar blocklets of ca 43 nm domain size, with polydisperse crystalline (≃7.5 nm) and amorphous (≃1.1 nm) layers alternatively assembled into a lamellar spacing of ≃8.6 nm with 20% polydispersity. Upon melting, the semicrystalline lamellae disintegrate into disperse and molten amylopectin nanoclusters with dissolved and partially untangled amylose chains in the aqueous matrix which leads to increased solution viscosity. During subsequent cooling, gelation starts at around 347 K; successively increased solution viscosity coincides with the development of nanocluster aggregation to a fractal dimension ≃2.3 at 303 K, signifying increasing intercluster association through collapsed amylose chains owing to decreased solvency of the aqueous medium with decreasing temperature.

  7. Nitrifying and denitrifying bacteria in aerobic granules formed in sequencing batch airlift reactors

    Institute of Scientific and Technical Information of China (English)

    WANG Fang; YANG Fenglin; QI Aijiu

    2007-01-01

    The purpose of this study was to investigate nitrifying bacteria and denitrifying bacteria isolated from aerobic granules.Aerobic granules were formed in an internal-circulate sequencing batch airlift reactor(SBAR)and biodegradation of NH3 -N was analyzed in the reactor.Bacteria were isolated and determined from aerobic granules using selected media.The growth properties and morphology of bacteria colonies were observed by controlling aerobic or anaerobic conditions in the culture medium.It was found that bacteria in aerobic granules were diverse and some of them were facultative aerobes.The diversity of bacteria in aerobic granules was a premise of simultaneous nitrification and denitrification.

  8. Granulation of sulfur-oxidizing bacteria for autotrophic denitrification.

    Science.gov (United States)

    Yang, Weiming; Lu, Hui; Khanal, Samir K; Zhao, Qing; Meng, Liao; Chen, Guang-Hao

    2016-11-01

    Sulfur-oxidizing bacteria (SOB) was successfully employed for effective autotrophic denitrification and sludge minimization in a full-scale application of saline sewage treatment in Hong Kong. In this study, a Granular Sludge Autotrophic Denitrification (GSAD) reactor was continuously operated over 600 days for SOB granulation, and to evaluate the long-term stability of SOB granules, microbial communities and denitrification efficacy. Sludge granulation initiated within the first 40 days of start-up with an average particle size of 186.4 μm and sludge volume index (SVI5) of 40 mL/g in 5 min. The sludge granules continued to grow reaching a nearly uniform size of mean diameter 1380 ± 20 μm with SVI5 of 30 mL/g during 600 days of GSAD reactor operation at hydraulic retention time of 5 h and nitrate loading rate of 0.33 kg-N/m(3)/d. The GSAD reactor with SOB granular sludge achieved 93.7 ± 2.1% nitrogen and complete sulfide removal with low sludge yield of 0.15 g-volatile suspended solids (VSS)/g-N, and much lower nitrous oxide (N2O) emission than the heterotrophic denitrifying process. Microbial community analysis using fluorescence in situ hybridization (FISH) technique revealed that granules were enriched with SOB contributing to autotrophic denitrification. Furthermore, 16S rRNA analysis showed diverse autotrophic denitrification related genera, namely Thiobacillus (32.6%), Sulfurimonas (31.3%), and Arcobacter (0.01%), accounting for 63.9% of total operational taxonomic units at the generic level. No heterotrophic denitrification related genera were detected. The results from this study could provide useful design and operating conditions with respect to SOB sludge granulation and its subsequent application in a full-scale autotrophic denitrification in the Sulfate reduction-Autotrophic denitrification-Nitrification Integrated (SANI) process. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Study growth kinetics in fluidized bed granulation with at-line FBRM.

    Science.gov (United States)

    Hu, Xinhui; Cunningham, John C; Winstead, Denita

    2008-01-22

    In this study, a novel at-line focused beam reflectance measurement (FBRM) technique was developed to investigate granule growth in a fluidized bed granulation (FBG). The chord length distribution (CLD) measured by the FBRM was used to represent granule particle size distribution (PSD). Through a systematic study, it was proved that the trends of the chord length measured by the at-line FBRM technique were identical to those measured by a laser diffraction instrument and sieve analysis in spite of different measurement mechanisms. The portable at-line FBRM technique was successfully applied to a granule growth kinetics study for a fluidized bed granulation performed in a Glatt GPCG-1 granulator. Granule size evolution was clearly exhibited by the at-line FBRM. Spray rate was found to be the most significant factor on the granule growth compared with the other two factors: binder solution concentration and intra- to extra-granular microcrystalline cellulose (MCC) ratio for the formulation studied in this work. The CLD evolution measured by the FBRM confirmed that the granule agglomeration was mainly dominated by the binder on the granule surface. The at-line FBRM enables us to select appropriate process parameters and effectively control the fluid bed granulation process.

  10. Investigation on side-spray fluidized bed granulation with swirling airflow.

    Science.gov (United States)

    Wong, Poh Mun; Chan, Lai Wah; Heng, Paul Wan Sia

    2013-03-01

    Top-spray fluidized bed granulation with axial fluidization airflow from the bottom of the granulator is well-established in the pharmaceutical industry. The application of swirling airflow for fluidized bed granulation was more recently introduced. This study examined the effects of various process parameters on the granules produced by side-spray fluidized bed with swirling airflow using the central composite and Box-Behnken design of experiment. Influence of the amount of binder solution, spray rate, and distance between spray nozzle and powder bed were initially studied to establish operationally viable values for these parameters. This was followed by an in-depth investigation on the effects of inlet airflow rate, atomizing air pressure and distance between spray nozzle and powder bed on granule properties. It was found that the amount of binder solution had a positive correlation with granule size and percentage of lumps but a negative correlation with size distribution and Hausner ratio of the granules. Binder solution spray rate was also found to affect the granules size. High drug content uniformity was observed in all the batches of granules produced. Both inlet airflow rate and atomizing air pressure were found to correlate negatively with granule size and percentage of lumps but correlate positively with the size distribution of the granule produced. Percentage of fines was found to be significantly affected by inlet airflow rate. Distance between spray nozzle and powder bed generally affected the percentage of lumps.

  11. Effects of extracellular polymer substances on aerobic granulation in sequencing batch reactors

    Institute of Scientific and Technical Information of China (English)

    WANG Zhi-ping; LIU Li-li; YAO Jie; SUN Li-xin; CAI Wei-min

    2009-01-01

    The effects of extracellular polymeric substances (EPS) on aerobic granulation in sequencing batch reactors (SBR) were investigated by evaluating the EPS content, and the relationship between EPS composition and surface properties of glucose-fed aerobic granules. The results show that aerobic granular sludge contains more EPS than seed sludge, and it is about 47 mg/gMLSS. Corresponding to the changes of EPS, the surface charge of microorganisms in granules increases from -0. 732 to -0. 845 meq/gMLSS, whereas the hydrophobicry changes significantly from 48.46% to 73. 16%. It is obviously that changes of EPS in sludge alter the negative surface charge and hydrophobieity of microorganisms in granules, enhance the polymeric interaction and promote the aerobic granulation. Moreover, EPS can serve as carbon and energy reserves in granulation, thus the growth between the interior and exterior bacteria is balanced, and the integrality of granules is maintained.SEM observation of the granules exhibits that EPS in granules are ropy ; by mixing with bacteria, compact matrix structure can be formed. The distribution of EPS in granules profiles the importance of EPS storage. It can be concluded that EPS play a crucial role in aerobic granulation.

  12. Study of the iron ores mixture granulation in the sintering process. Part 1. Granulation; Estudio de la granulacion de la mezcla de minerales de hierro en el proceso de sinterizacion. I parte. Granulacion

    Energy Technology Data Exchange (ETDEWEB)

    Formoso, A.; Jimenez, J.; Moro, A.; Cores, A. [Centro Nacional de Investigaciones Metalurgicas CENIM. Madrid (Spain); Moro, A. [Universidad de Oviedo (Spain); Fernandez-Pello, G.; Muniz, M. [ACERALIA. Gijon (Spain)

    2000-07-01

    The granulation process of the ore mixture is described and the fitness for granulation of several iron ores form part of the mixture is studied. With a good granulation and sintering maximum temperature control is possible to achieve the best sintered structure forming by a hematite nucleus bonded by acicular ferrites. The industrial experience of several types of granulation is described. (Author) 33 refs.

  13. Regularization by External Variables

    DEFF Research Database (Denmark)

    Bossolini, Elena; Edwards, R.; Glendinning, P. A.

    2016-01-01

    Regularization was a big topic at the 2016 CRM Intensive Research Program on Advances in Nonsmooth Dynamics. There are many open questions concerning well known kinds of regularization (e.g., by smoothing or hysteresis). Here, we propose a framework for an alternative and important kind of regula...... of regularization, by external variables that shadow either the state or the switch of the original system. The shadow systems are derived from and inspired by various applications in electronic control, predator-prey preference, time delay, and genetic regulation....

  14. MICROMORPHOLOGICAL STUDIES OF STARCH GRANULES IN SELECTED PROCESSED INDIGENOUS FLOUR OF SOUTH WESTERN NIGERIA

    Directory of Open Access Journals (Sweden)

    Adeniyi A. JAYEOLA

    2013-06-01

    Full Text Available Starch granules of yam stem tubers, plantain fruits and cassava root tubers were studied using the light microscope and then compared. Yam and plantain, both monocotyledons, had morphologically similar granules between locations, being mostly oval in shape while the granules of cassava, a dicot, were predominantly globular but varied between locations. Differences in processing methods between locations might be responsible for the observed variation in cassava granules. There is a suggestion that starch granule morphology might follow lineages in a broad sense. The unique micromorphology of cassava starch granule could make it easily detectable when adulterated, substituted or contaminated with yam or plantain granules and this could provide a cost effective clue in forensic determination.

  15. Granular computing classification algorithms based on distance measures between granules from the view of set.

    Science.gov (United States)

    Liu, Hongbing; Liu, Chunhua; Wu, Chang-an

    2014-01-01

    Granular computing classification algorithms are proposed based on distance measures between two granules from the view of set. Firstly, granules are represented as the forms of hyperdiamond, hypersphere, hypercube, and hyperbox. Secondly, the distance measure between two granules is defined from the view of set, and the union operator between two granules is formed to obtain the granule set including the granules with different granularity. Thirdly the threshold of granularity determines the union between two granules and is used to form the granular computing classification algorithms based on distance measures (DGrC). The benchmark datasets in UCI Machine Learning Repository are used to verify the performance of DGrC, and experimental results show that DGrC improved the testing accuracies.

  16. Artificial Intelligence Tools for Scaling Up of High Shear Wet Granulation Process.

    Science.gov (United States)

    Landin, Mariana

    2017-01-01

    The results presented in this article demonstrate the potential of artificial intelligence tools for predicting the endpoint of the granulation process in high-speed mixer granulators of different scales from 25L to 600L. The combination of neurofuzzy logic and gene expression programing technologies allowed the modeling of the impeller power as a function of operation conditions and wet granule properties, establishing the critical variables that affect the response and obtaining a unique experimental polynomial equation (transparent model) of high predictability (R(2) > 86.78%) for all size equipment. Gene expression programing allowed the modeling of the granulation process for granulators of similar and dissimilar geometries and can be improved by implementing additional characteristics of the process, as composition variables or operation parameters (e.g., batch size, chopper speed). The principles and the methodology proposed here can be applied to understand and control manufacturing process, using any other granulation equipment, including continuous granulation processes.

  17. GRANULATION TRIALS OF WASTE THE DUST SILICON CARBIDE FOR UTILIZATION IN METALLURGY

    Directory of Open Access Journals (Sweden)

    Gabriel Borowski

    2016-09-01

    Full Text Available The article presents the results of laboratory granulation tests of dust silicon carbide and the results of research on the selection of the binder and the properties of the granules obtained. The research material was a waste of the silicon carbide powder with a high fragmentation, mixed with a cement or an organic modified starch specimen. Six tests were performed in a disc granulator with 100 cm in diameter. In each series of trial specified: the type and share of the binder, the diameter of the granules, tenderness, type of structure and mechanical properties. Good granules of silicon carbide obtained with the addition of cement binder with 4% of the mass fraction and at least 24 hours of seasoning. The binder should be added twice by powdering, first in a stirred granulator, and again after manufacture. It was found that the resulting granules may be used as a replacement of ferrosilicon in the process of steelmaking.

  18. Study of Viability of Phosphate Solubilizing Bacteria in Phosphate granules

    Directory of Open Access Journals (Sweden)

    hajar rajabi

    2017-06-01

    Full Text Available Introduction: sustainable development and the environment are interconnected. Sustainable agriculture is continuous utilization of a farm with respect to various aspects of environmental conditions by using fewer inputs (other than Bio-fertilizers. Phosphorus is one of the essential elements for the plants. Management of soil is possible by using biological fertilizers pillar of sustainable agriculture and providing some of the phosphorus needed by plants via bio-fertilizers. Phosphorus deficiency is extremely effective on the plant growth and productivity. The application of phosphorus fertilizers is expensive and dangerous. In addition, phosphorus in the soilmay become insoluble and will be unavailable to the plants. Studies showed that phosphate solubilizing bacteria in the soil rhizosphere are active and by root exudates solve insoluble phosphates such as tricalcium phosphate, and form absorbable P for plant. Consequently, the use of microbial fertilizers could reduce excessive use of chemical fertilizers and lead to decrease their harmful effects and protect the environment and conservation of available resources. The biological phosphate fertilizer industry uses sugar beet molasses as a binder and drying granules at high temperatures. Therefore, it is important to evaluate the durability of the bacteria in molasses at high temperature. Materials and Methods: This study was designed as completely randomized design in a factorial arrangement.10 isolates were selected and the ratios of 50%, 25%, 15% and 10% of the apatite, organic matter, sulfur and soluble granule (ratio 1: 1 and 2: 1 bacteria and molasses, respectively, for each isolate was prepared. The final product was dried at 28 and 40 °C and remained for 4 months and population counted at first day and 10, 20, 30, 60, 90 and 120 days after the preparing. The population was counted by the serial dilution technique and cultured at Sperber media. Results and Discussion:Comparing the

  19. Multivariate modelling of the tablet manufacturing process with wet granulation for tablet optimization and in-process control

    NARCIS (Netherlands)

    Westerhuis, J.A; Coenegracht, P.M J; Lerk, C.F

    1997-01-01

    The process of tablet manufacturing with granulation is described as a two-step process. The first step comprises wet granulation of the powder mixture, and in the second step the granules are compressed into tablets. For the modelling of the pharmaceutical process of wet granulation and tableting,

  20. A Dynamic Adaptive Layered Multicast Congestion Control Mechanism

    Institute of Scientific and Technical Information of China (English)

    REN Liyong; LU Xianliang; WEI Qingsong; ZHOU Xu

    2003-01-01

    To solve the problem that most of existing layered multicast protocols cannot adapt to dynamic network conditions because their layers are coarsely granulated and static, a new congestion control mechanism for dynamic adaptive layered multicast(DALM) is presented. In this mechanism, a novel feedback aggregating algorithm is put forward, which can dynamically determine the number of layers and the rate of each layer, and can efficiently improve network bandwidth utilization ratio.Additionally, because all layers is transmitted in only one group, the intricate and time-consuming internet group management protocol(IGMP) operations, caused by receiver joining a new layer or leaving the topmost subscribed layer, are thoroughly eliminated. And this mechanism also avoids other problems resulted from multiple groups. Simulation results show that DALM is adaptive and TCP friendly.

  1. Stabilization of unstable pelvic fractures with a novel internal-external fixator

    Institute of Scientific and Technical Information of China (English)

    JIANG Zan-li; Gary Chen

    2011-01-01

    An internal-external fixator for stabilization in three cases with unstable pelvic fractures were reported.Compared with external fixation,the internal-external fixator,which is placed in the subcutaneous layer,decreased the risk of pin-track infection,pin site pain,and bowel obstruction; meanwhile,it had the advantage of external fixation:it was easy to apply,controlled damage,and resulted in minimal injury.

  2. A study on the production processes of granulated iron

    Science.gov (United States)

    Nokhrina, O. I.; Rozhikhina, I. D.; Khodosov, I. E.

    2016-09-01

    The results of theoretical and experimental studies on the production process of high-quality granulated iron using hematite-magnetite iron ore and coal of different brands as a raw material are presented. According to the research the optimal coal consumption, temperature and time parameters of the metallization process, necessary for obtaining metallized materials with the specified composition and metallization degree, are defined. The conditions for the formation of metal granules with high content (over 98%) of primary iron are found. The process includes two stages: initially the solid-phase reduction of iron from oxides with production of metallized sponge material is carried out, further as the temperature increases the separation of slag and metal phases takes place.

  3. A Novel Method Isolated Microorganisms in Soil Granule

    Institute of Scientific and Technical Information of China (English)

    Liu Bao-ping; Xiang Wen-sheng; Wang Hong-yan; Fu Shi-cong

    2012-01-01

    A novel method isolated microorganisms in soil granule was built. The key steps included: repeated elutriation of soil by sterilized water, inoculation on the plates with the elutriated sediments, incubation of the plates and isolation of the actinomycetes by using selected culture medium. We formulated that most microflora included the dominant actinomycetes in the soil were carried away with the sterilized water in the elutriation procedure, some rare actinomycetes and few other microflora included bacteria were remained in the elutriated sediments, the other microflora were excluded to grew into colonies on the plates by using selective culture medium for actinomycetes in the elutriated sediments. Results showed the supposition. Non-streptomycete actinomycetes were isolated both from black soil samples from Chinese northeast area and compost samples from Chinese central area. Soil fungi in granule were isolated by using the selective conditions to favor fungi. The results showed that the method was effective

  4. Self-organized criticality of liquefaction in saturated granules

    Institute of Scientific and Technical Information of China (English)

    吴爱祥; 孙业志; 李青松

    2003-01-01

    Utilizing the dissipative structure theory, the evolutionary process of vibrating liquefaction in saturatedgranules was analyzed. When the irreversible force increases to some degree, the system will be in a state far fromequilibrium, and the new structure probably occurs. According to synergetics, the equation of liquefaction evolutionwas deduced, and the evolutionary process was analyzed by dynamics. The evolutionary process of vibrating lique-faction is a process in which the period doubling accesses to chaos, and the fluctuation is the original driving force ofsystem evolution. The liquefaction process was also analyzed by fractal geometry. The steady process of vibratingliquefaction obeys the scaling form, and shows self-organized criticality in the course of vibration. With the incre-ment of the recurrence number, the stress of saturated granules will decrease rapidly or lose completely, and thestrain will increase rapidly, so that the granules can not sustain load and the "avalanche" phenomenon takes place.

  5. A PRELIMINARY PHARMACOGNOSTICAL AND PHYSICOCHEMICAL ASSAY OF VASAKHANDA KUSHMANDAKA GRANULES

    Directory of Open Access Journals (Sweden)

    Ghosh Kuntal

    2012-02-01

    Full Text Available Vasaka (Adhatoda vasica Nees of Acanthaceae family and Kushmanda (Benincasa hispida Thunb. of Cucurbitaceae family are the commonly used herbs in Ayurvedic system of medicine with its vivid action on various Systems. In Ayurveda, Vasaka is used in bronchial asthma, cough, diabetes mellitus and also in the pitta-kapha predominant diseases where as Kushmanda is used in Acid reflux syndrome, mental diseases, alcoholism, etc. Samsakara is a tool mentioned in Ayurveda which refers to modification or processing of drug to potentiate it, or to get desired action or to change its form. An attempt was made to change the form of Vasakhanda Kushmandaka avaleha into Vasakhanda Kushmandaka granules and assessed for its pharmacognostical and pharmaceutical characters. The present study provides the details of Vasakhanda Kushmandaka granules preparation, its pharmacognostical and physicochemical characters which may help in laying down a standard protocol for future research works.

  6. A constitutive model for sintering of granulated ceramic powders

    Science.gov (United States)

    Shinagawa, K.; Hirashima, Y.

    1998-05-01

    Sintering behavior of granulated powder is investigated to develop a constitutive model for deformation analysis of ceramic powder compacts during sintering. Spray-dried alumina is compacted by CIPing (cold isostatic pressing) and sintered at various temperatures. Shrinkage and the change in grain size of the compacts during sintering are revealed in relation to the inhomogeneous microstructure consisting of fractured and unfractured granules as a consequence of the compaction. A constitutive model for the ceramic powder compacts having the internal structure is presented; The difference in grain growth in dense and sparse regions of the compacts is taken into consideration to the model. The results calculated by the model show good agreement with that obtained by experiment.

  7. Relation between trees of fragmenting granules and supergranulation evolution

    CERN Document Server

    Roudier, Th; Rieutord, M; Frank, Z

    2016-01-01

    Context: The determination of the underlying mechanisms of the magnetic elements diffusion over the solar surface is still a challenge. Understanding the formation and evolution of the solar network (NE) is a challenge, because it provides a magnetic flux over the solar surface comparable to the flux of active regions at solar maximum. Aims: We investigate the structure and evolution of interior cells of solar supergranulation. From Hinode observations, we explore the motions on solar surface at high spatial and temporal resolution. We derive the main organization of the flows inside supergranules and their effect on the magnetic elements. Method: To probe the superganule interior cell, we used the Trees of Fragmenting Granules (TFG) evolution and their relations to horizontal Results: Evolution of TFG and their mutual interactions result in cumulative effects able to build horizontal coherent flows with longer lifetime than granulation (1 to 2 hours) over a scale up to 12\\arcsec. These flows clearly act on t...

  8. Isolating stromal stem cells from periodontal granulation tissues.

    Science.gov (United States)

    Hung, Tzu-Yuan; Lin, Hsiang-Chun; Chan, Ying-Jen; Yuan, Kuo

    2012-08-01

    Stem cell therapy is a promising area in regenerative medicine. Periodontal granulation tissues are often discarded during conventional surgery. If stromal stem cells can be isolated from these tissues, they can be used for subsequent surgery on the same patient. Fifteen human periodontal granulation tissue samples were obtained from intrabony defects during surgery. Immunohistochemistry (IHC) was carried out on five of the samples to identify STRO-1, a marker of mesenchymal stem cells. Five samples underwent flow cytometry analysis for the same marker. The remaining five samples were characterized by "colony formation unit-fibroblast" (CFU-f) assay and selected for proliferation assay, flow cytometry of stem cell markers, immunocytochemistry (ICC), multipotent differentiation assays, and repairing critical-size defects in mice. The ratio of STRO-1(+) cells detected by IHC was 5.91 ± 1.50%. The analysis of flow cytometry for STRO-1 was 6.70 ± 0.81%. Approximately two thirds of the CFU-f colonies had a strong reaction to STRO-1 in ICC staining. The cells were multipotent both in vitro and in vivo. Mice given bone grafts and stem cells showed significantly better bone healing than those without stem cells. Multipotent stromal stem cells can be isolated from human periodontal granulation tissues. These cells improve new bone formation when transplanted in mouse calvarial defects. Isolating stem cells from relatively accessible sites without extra procedures is clinically advantageous. This study demonstrated that human periodontal granulation tissues contain isolatable multipotent stem cells. The cells may be a good source for autotransplantation in subsequent treatment.

  9. Excess granulation tissue and hair loss following acitretin

    Directory of Open Access Journals (Sweden)

    Francesca Gaudiello

    2011-02-01

    Full Text Available Retinoids are routinely used in dermatology for various clinical entities including acne vulgaris, rosacea, hypertrophic scars, strie distensae, psoriasis, disorders of dyskeratinization, cancer prevention and other chronic hyperkeratotic disorders. Oral acitretin therapy is effective in the treatment of psoriasis normalizing cellular differentiation and maturation but clinical side-effects are reported. We describe the occurrence of excess granulation tissue in the nails sulcus and noncicatricial universal alopecia in a psoriatic patient receiving oral acitretin.

  10. Granule-Dependent Natural Killer Cell Cytotoxicity to Fungal Pathogens

    Science.gov (United States)

    Ogbomo, Henry; Mody, Christopher H.

    2017-01-01

    Natural killer (NK) cells kill or inhibit the growth of a number of fungi including Cryptococcus, Candida, Aspergillus, Rhizopus, and Paracoccidioides. Although many fungi are not dangerous, invasive fungal pathogens, such as Cryptococcus neoformans, cause life-threatening disease in individuals with impaired cell-mediated immunity. While there are similarities to cell-mediated killing of tumor cells, there are also important differences. Similar to tumor killing, NK cells directly kill fungi in a receptor-mediated and cytotoxic granule-dependent manner. Unlike tumor cell killing where multiple NK cell-activating receptors cooperate and signal events that mediate cytotoxicity, only the NKp30 receptor has been described to mediate signaling events that trigger the NK cell to mobilize its cytolytic payload to the site of interaction with C. neoformans and Candida albicans, subsequently leading to granule exocytosis and fungal killing. More recently, the NKp46 receptor was reported to bind Candida glabrata adhesins Epa1, 6, and 7 and directly mediate fungal clearance. A number of unanswered questions remain. For example, is only one NK cell-activating receptor sufficient for signaling leading to fungal killing? Are the signaling pathways activated by fungi similar to those activated by tumor cells during NK cell killing? How do the cytolytic granules traffic to the site of interaction with fungi, and how does this process compare with tumor killing? Recent insights into receptor use, intracellular signaling and cytolytic granule trafficking during NK cell-mediated fungal killing will be compared to tumor killing, and the implications for therapeutic approaches will be discussed. PMID:28123389

  11. Microstructure and ultrastructure of high-amylose rice resistant starch granules modified by antisense RNA inhibition of starch branching enzyme.

    Science.gov (United States)

    Wei, Cunxu; Qin, Fengling; Zhu, Lijia; Zhou, Weidong; Chen, Yifang; Wang, Youping; Gu, Minghong; Liu, Qiaoquan

    2010-01-27

    A high-amylose transgenic rice line (TRS) modified by antisense RNA inhibition of starch branching enzymes revealed a resistant starch-rich quality. Compound starch granules in whole grains of the regular rice cultivar Teqing (TQ) were readily split during fracturing, whereas the starch granules in TRS were structurally intact and showed large voluminous, non-angular rounded bodies and elongated, filamentous structures tolerant of fracturing. In isolated preparation, TQ starch granules broke up into separate polygonal granules, whereas TRS starch granules kept their intactness. TRS starch granules consisted of packed smaller subgranules, some of which located at the periphery of starch granules were fused to each other with adjacent ones forming a thick band or wall encircling the entire circumference of the granules. TQ starch granules had a high concentration of amylose in the concentric hilum, whereas TRS starch granules showed a relatively even distribution of amylose with intense amylose in both hilum and band.

  12. FIB/SEM cell sectioning for intracellular metal granules characterization

    Science.gov (United States)

    Milani, Marziale; Brundu, Claudia; Santisi, Grazia; Savoia, Claudio; Tatti, Francesco

    2009-05-01

    Focused Ion Beams (FIBs) provide a cross-sectioning tool for submicron dissection of cells and subcellular structures. In combination with Scanning Electron Microscope (SEM), FIB provides complementary morphological information, that can be further completed by EDX (Energy Dispersive X-ray Spectroscopy). This study focus onto intracellular microstructures, particularly onto metal granules (typically Zn, Cu and Fe) and on the possibility of sectioning digestive gland cells of the terrestrial isopod P. scaber making the granules available for a compositional analysis with EDX. Qualitative and quantitative analysis of metal granules size, amount and distribution are performed. Information is made available of the cellular storing pattern and, indirectly, metal metabolism. The extension to human level is of utmost interest since some pathologies of relevance are metal related. Apart from the common metal-overload-diseases (hereditary hemochromatosis, Wilson's and Menkes disease) it has been demonstrated that metal in excess can influence carcinogenesis in liver, kidney and breast. Therefore protocols will be established for the observation of mammal cells to improve our knowledge about the intracellular metal amount and distribution both in healthy cells and in those affected by primary or secondary metal overload or depletion.

  13. High pressure impact on changes in potato starch granules

    Directory of Open Access Journals (Sweden)

    Słomińska Lucyna

    2015-12-01

    Full Text Available Air dry potato starch (84.9% d.s. was subjected to pressurizing under the pressure of 50, 100, 250, 500, 750, 1000 and 2000 MPa for 1 h. The physical properties of pressurized starch, such as morphology, surface and crystalline structure, gelatinization parameters, were studied by means of scanning and atomic force microscopy (SEM/AFM, X-ray diffraction (X-ray, differential scanning calorimetry (DSC. The susceptibility to the amylolytic enzyme (α-amylase was also measured. Application of pressure in the range of 50–2000 MPa results in an increase in the compressed potato starch bulk density, change in the contours of the granules from oval to polyhedral, increase in the roughness of the granule surface, vanishing of the X-ray reflexes generated by the orthogonal structure and weakening of the reflexes generated by the hexagonal structure, lowering of the enthalpy of starch gelatinization, and the enhancement of hydrolytic susceptibility of starch granules to the amylolytic enzyme.

  14. Soil Stabilisation Using Ground Granulated Blast Furnace Slag

    Directory of Open Access Journals (Sweden)

    Ashish Kumar Pathak

    2014-05-01

    Full Text Available Stabilisation is a broad sense for the various methods employed and modifying the properties of a soil to improve its engineering performance and used for a variety of engineering works. In today‟s day soil stabilisation is the major problem for civil engineers, either for construction of road and also for increasing the strength or stability of soil and reduces the construction cost. In this thesis the soil are stabilised by ground granulated blast furnace slag (GGBS and this material is obtained from the blast furnace of cement plant, which is the byproduct of iron (from ACC plant, sindri. It is generally obtained in three shaped one is air cooled, foamed shaped and another is in granulated shaped. The use of by-product materials for stabilisation has environmental and economic benefits. Ground granulated blast furnace slag (GGBS material is used in the current work to stabilise soil (clay. The main objectives of this research were to investigate the effect of GGBS on the engineering property (optimum moisture content and maximum dry density, plastic limit, liquid limit, compaction, unconfined compressive strength, triaxial and California bearing ratio test of the soil and determine the engineering properties of the stabilised.

  15. Modelling and simulation of nutrient dispersion from coated fertilizer granules

    Science.gov (United States)

    Razali, Radzuan; Daud, Hanita; Nor, Shafiq Mohd.

    2014-10-01

    The usage of Controlled-Release Fertilizer (CRF) is essential in plants and crops to fulfill the need and requirement for the modern agriculture which now feeds 6 billion people. Therefore modeling and simulation of nutrient release from coated fertilizer has become the best method to study the behavior of some parameters toward water saturation in and nutrient release from the coated-fertilizer granule. This paper is the improvement development of modeling and computer simulation by Basu [1] which include some of the factors affecting the water saturation time and nutrient release time from a coated-fertilizer. The effect of granule radius, the diffusivity of water and nutrient, the temperature of surrounding, the contact areas and the characteristic of the coating are studied and the simulation was developed using MATLAB software. The studies and understanding of this project is very important and useful especially to determine the important parameters in the manufacturing process of the coated-fertilizer granule and also will be useful for the farmers/users in the selection of the best fertilizers for their crops.

  16. ATP storage and uptake by isolated pancreatic zymogen granules

    DEFF Research Database (Denmark)

    Haanes, Kristian Agmund; Novak, Ivana

    2010-01-01

    ATP is released from pancreatic acini in response to cholinergic and hormonal stimulation. The same stimuli cause exocytosis of ZG (zymogen granules) and release of digestive enzymes. The aim of the present study was to determine whether ZG stored ATP and to characterize the uptake mechanism...... for ATP transport into the ZG. ZG were isolated and the ATP content was measured using luciferin/luciferase assays and was related to protein in the sample. The estimate of ATP concentration in freshly isolated granules was 40-120 µM. The ATP uptake had an apparent Km value of 4.9±2.1 mM when granules...... were incubated without Mg2+ and a Km value of 0.47±0.05 mM in the presence of Mg2+, both in pH 6.0 buffers. The uptake of ATP was significantly higher at pH 7.2 compared with pH 6.0 solutions. The anion transport blockers DIDS (4,4'-di-isothiocyanostilbene-2,2'-disulfonate) and Evans Blue inhibited ATP...

  17. Spatial Circular Granulation Method Based on Multimodal Finger Feature

    Directory of Open Access Journals (Sweden)

    Jinfeng Yang

    2016-01-01

    Full Text Available Finger-based personal identification has become an active research topic in recent years because of its high user acceptance and convenience. How to reliably and effectively fuse the multimodal finger features together, however, has still been a challenging problem in practice. In this paper, viewing the finger trait as the combination of a fingerprint, finger vein, and finger-knuckle-print, a new multimodal finger feature recognition scheme is proposed based on granular computing. First, the ridge texture features of FP, FV, and FKP are extracted using Gabor Ordinal Measures (GOM. Second, combining the three-modal GOM feature maps in a color-based manner, we then constitute the original feature object set of a finger. To represent finger features effectively, they are granulated at three levels of feature granules (FGs in a bottom-up manner based on spatial circular granulation. In order to test the performance of the multilevel FGs, a top-down matching method is proposed. Experimental results show that the proposed method achieves higher accuracy recognition rate in finger feature recognition.

  18. Organellar proteomics: analysis of pancreatic zymogen granule membranes.

    Science.gov (United States)

    Chen, Xuequn; Walker, Angela K; Strahler, John R; Simon, Eric S; Tomanicek-Volk, Sarah L; Nelson, Bradley B; Hurley, Mary C; Ernst, Stephen A; Williams, John A; Andrews, Philip C

    2006-02-01

    The zymogen granule (ZG) is the specialized organelle in pancreatic acinar cells for digestive enzyme storage and regulated secretion and has been a model for studying secretory granule functions. In an initial effort to comprehensively understand the functions of this organelle, we conducted a proteomic study to identify proteins from highly purified ZG membranes. By combining two-dimensional gel electrophoresis and two-dimensional LC with tandem mass spectrometry, 101 proteins were identified from purified ZG membranes including 28 known ZG proteins and 73 previously unknown proteins, including SNAP29, Rab27B, Rab11A, Rab6, Rap1, and myosin Vc. Moreover several hypothetical proteins were identified that represent potential novel proteins. The ZG localization of nine of these proteins was further confirmed by immunocytochemistry. To distinguish intrinsic membrane proteins from soluble and peripheral membrane proteins, a quantitative proteomic strategy was used to measure the enrichment of intrinsic membrane proteins through the purification process. The iTRAQ ratios correlated well with known or Transmembrane Hidden Markov Model-predicted soluble or membrane proteins. By combining subcellular fractionation with high resolution separation and comprehensive identification of proteins, we have begun to elucidate zymogen granule functions through proteomic and subsequent functional analysis of its membrane components.

  19. Calcium dynamics in the secretory granules of neuroendocrine cells.

    Science.gov (United States)

    Alvarez, Javier

    2012-01-01

    Cellular Ca(2+)signaling results from a complex interplay among a variety of Ca(2+) fluxes going across the plasma membrane and across the membranes of several organelles, together with the buffering effect of large numbers of Ca(2+)-binding sites distributed along the cell architecture. Endoplasmic and sarcoplasmic reticulum, mitochondria and even nucleus have all been involved in cellular Ca(2+) signaling, and the mechanisms for Ca(2+) uptake and release from these organelles are well known. In neuroendocrine cells, the secretory granules also constitute a very important Ca(2+)-storing organelle, and the possible role of the stored Ca(2+) as a trigger for secretion has attracted considerable attention. However, this possibility is frequently overlooked, and the main reason for that is that there is still considerable uncertainty on the main questions related with granular Ca(2+) dynamics, e.g., the free granular [Ca(2+)], the physical state of the stored Ca(2+) or the mechanisms for Ca(2+) accumulation and release from the granules. This review will give a critical overview of the present state of knowledge and the main conflicting points on secretory granule Ca(2+) homeostasis in neuroendocrine cells.

  20. Study on Predrying by Spin Flash Dryer for Granulation

    Institute of Scientific and Technical Information of China (English)

    王晓静; 叶鸣; 钱树德

    2004-01-01

    Spin flash dryer has the advantages of both fluidized bed dryer and pneumatic dryer.It has predominance in dealing with thermal sensitive materials.In this paper,the distribution of the air velocity in the spin flash dryer is discussed,which indicates that the rotating air in the dryer chamber can be divided into two areas,potential flow area and plane swirl area.Experiments show that air tangent velocity effects the process of granulation most remarkably.The radial distribution and moisture content of the particles have their intrinsic rules along either the diameter or height of the drying chamber.Besides,the operating parameters of predrying on bleaching powder are optimized.To meet the strict standard of the wet-pressing granulator on the moisture content of the feeder,a narrow lap is made at proper height in the wall of the drying chamber,where a chute and a rotating valve are installed in order to predry the filter cake and remove a part of water.Then the material is fed into the wet-pressing granulator.

  1. 包衣微丸型碱性蛋白酶的制备%Preparation of coated granule alkaline protease

    Institute of Scientific and Technical Information of China (English)

    马俊孝; 张赞剑; 史衍鲁; 卢彦梅; 刘伟

    2012-01-01

    开发了一种包衣微丸型碱性蛋白酶的制备工艺,结果表明:30 L发酵中罐发酵50 h比酶活可达4.26×104 U/mL,发酵液经絮凝处理、板框压滤、膜浓缩后可制成酶活达300 000 U/mL的酶浓缩液.经流化后制得含酶颗粒,再包裹薄层后,得包衣微丸型碱性蛋白酶.对制备的包衣微丸型碱性蛋白酶的稳定性、去污效果等指标进行了评估.制备的包衣微丸型碱性蛋白酶产品在严苛条件下的稳定性与国外产品( Savinase 8.0T、PuraFast 2000HS)相当,产品暴露在37℃、75%湿度下8周后仍可保持74%的酶活力,产品的去污效果优于国外产品.制备的包衣微丸型碱性蛋白酶颗粒大小均匀,流动性和分散性好,对外界高温、高湿等不良环境具有很强的抵抗能力,适于工业化生产.%A process was developed for the preparing of coated granule alkaline protease. The method for preparing enzyme solution included fermentation, flocculation sedimentation, filtration, and ultrafiltration by membrane. The final products were prepared by producing a core containing enzymes and spraying the coating layer onto the core in a fluid-bed. The stability and detergency of the coated granule were investigated by accelerated experiments, and the characteristics of products were evaluated. The main results were as follows; the activity of protease was about 4. 26 x 10 U/mL after cultivating for 50 h in 30 L fer-mentor; The granule alkaline protease was characterized by a uniform particle size distribution, a high rate of finished products, and a free-flowing granulate (300 000 U/mL). When exposed at 37 ? and 75% relative humidity for 8 weeks, the coated granule retained 74% of the original activity. Furthermore , the detergency was better than that of a commercial product.

  2. External Measures of Cognition

    Directory of Open Access Journals (Sweden)

    Osvaldo eCairo

    2011-10-01

    Full Text Available The human brain is undoubtedly the most impressive, complex and intricate organ that has evolved over time. It is also probably the least understood, and for that reason, the one that is currently attracting the most attention. In fact, the number of comparative analyses that focus on the evolution of brain size in Homo sapiens and other species has increased dramatically in recent years. In neuroscience, no other issue has generated so much interest and been the topic of so many heated debates as the difference in brain size between socially defined population groups, both its connotations and implications. For over a century, external measures of cognition have been related to intelligence. However, it is still unclear whether these measures actually correspond to cognitive abilities. In summary, this paper must be reviewed with this premise in mind.

  3. Model-based analysis of a twin-screw wet granulation system for continuous solid dosage manufacturing

    DEFF Research Database (Denmark)

    Kumar, Ashish; Vercruysse, Jurgen; Mortier, Severine T. F. C.

    2016-01-01

    Implementation of twin-screw granulation in a continuous from-powder-to-tablet manufacturing line requires process knowledge development. This is often pursued by application of mechanistic models incorporating the underlying mechanisms. In this study, granulation mechanisms considered...... the granulator under certain process conditions. Such a physical separation between the granulation regimes is promising for future design and advanced control of the continuous granulation process. (C) 2016 Elsevier Ltd. All rights reserved....

  4. Layer-by-layer magnetometry of polarizing supermirrors

    CERN Document Server

    Ruecker, U; Toperverg, B; Brueckel, T; Ott, F

    2002-01-01

    We investigate the remagnetization behaviour of remanent polarizing supermirrors by polarized neutron reflectometry. Such a mirror can be remagnetized in a magnetic field of 30 mT. It is shown, that at lower fields, the mirror is not completely remagnetized, but the magnetization of the thinner layers can be flipped more easily than the magnetization of the thicker layers. With polarized neutron reflectometry, we are able to find out exactly how many layers are magnetized parallel and how many are magnetized antiparallel to the external field. Furthermore, information about structural and magnetic imperfections (roughness, domain formation) is available. (orig.)

  5. Fluidized Bed Hot Melt Granulation with Hydrophilic Materials Improves Enalapril Maleate Stability.

    Science.gov (United States)

    Guimarães, Thiago F; Comelli, Amanda C C; Tacón, Luciana A; Cunha, Talita A; Marreto, Ricardo N; Freitas, Luís A P

    2017-05-01

    This work aimed at developing enalapril maleate granules in order to improve its stability in solid dosage form. Granules were prepared by hot melt granulation using a fluidized bed apparatus. Gelucire 50/13®, polyethylene glycol 6000 e Poloxamer 407® were studied and compared as binders in 2 × 2 factorial designs where the proportions of enalapril maleate, binders and spray dried lactose were varied. The granulation process resulted in high yields and granule sizes that indicated the prevalence of particles coating. Furthermore, the granules obtained showed adequate flowability and a fast dissolution rate of enalapril maleate with almost 100% of the drug released in 10 min. The stability of enalapril maleate in hard gelatin capsules showed that the drug stability was greatly increased in granules, since for raw drug, the remaining content of enalapril maleate after 91 days was 68.4% and, for granules, the content was always above 93%. This result was confirmed by the quantification of the degradation products, enalaprilat and diketopiperazine, which were found in very low content in granules samples. The results demonstrate that fluidized bed hot melt granulation with hydrophilic binders is a suitable alternative for improving the chemical stability of enalapril maleate.

  6. Control over the morphology and segregation of Zebrafish germ cell granules during embryonic development

    Directory of Open Access Journals (Sweden)

    Nakkrasae La-Iad

    2008-05-01

    Full Text Available Abstract Background Zebrafish germ cells contain granular-like structures, organized around the cell nucleus. These structures share common features with polar granules in Drosophila, germinal granules in Xenopus and chromatoid bodies in mice germ cells, such as the localization of the zebrafish Vasa, Piwi and Nanos proteins, among others. Little is known about the structure of these granules as well as their segregation in mitosis during early germ-cell development. Results Using transgenic fish expressing a fluorescently labeled novel component of Zebrafish germ cell granules termed Granulito, we followed the morphology and distribution of the granules. We show that whereas these granules initially exhibit a wide size variation, by the end of the first day of development they become a homogeneous population of medium size granules. We investigated this resizing event and demonstrated the role of microtubules and the minus-end microtubule dependent motor protein Dynein in the process. Last, we show that the function of the germ cell granule resident protein the Tudor domain containing protein-7 (Tdrd7 is required for determination of granule morphology and number. Conclusion Our results suggest that Zebrafish germ cell granules undergo a transformation process, which involves germ cell specific proteins as well as the microtubular network.

  7. Rice starch granule amylolysis--differentiating effects of particle size, morphology, thermal properties and crystalline polymorph.

    Science.gov (United States)

    Dhital, Sushil; Butardo, Vito M; Jobling, Stephen A; Gidley, Michael J

    2015-01-22

    The underlying mechanism of amylolysis of rice starch granules was investigated using isolated starch granules from wild-type, as well as SBEIIb mutant and down-regulated lines. Fused granule agglomerates isolated from mutant and transgenic lines were hydrolysed at similar rates by amylases, and had similar crystalline patterns and thermal properties as individual granules. Surface pores, a feature previously only reported for A-polymorphic starch granules, were also observed in B- and C-polymorphic rice starch granules. Although the microscopic patterns of hydrolysis among granules with different crystalline polymorphs were qualitatively similar, the extent and the rate of amylolysis were different, suggesting that B-type crystalline polymorphs are intrinsically more resistant to enzymatic hydrolysis than A-type in rice starch granules. It is proposed that the slightly longer branch lengths of amylopectin which leads to the formation of more stable B-type double helical structures compared to their A-type counterparts is the major parameter, with other factors such as granule size, surface pores and interior channels having secondary roles, in determining the rate of enzymatic hydrolysis of rice starch granules.

  8. Validation of a continuous granulation process using a twin-screw extruder.

    Science.gov (United States)

    Van Melkebeke, B; Vervaet, C; Remon, J P

    2008-05-22

    Using twin-screw granulation as particle size enlargement technique, the effect of modifying the screw configuration (number of mixing zones, configuration of kneading block) on granule quality, tablet properties and mixing efficiency was investigated. The amount of oversized agglomerates and yield was significantly influenced by the presence of an extra conveying element at the screw end. Changing the staggering angle of the kneading block significantly affected yield and granule friability. The 90 degrees configuration resulted in a lower yield and granule friability. Disintegration time was the only tablet property significantly influenced by the screw configuration as disintegration was significantly faster when an extra conveying element was placed at the screw end. The influence of tracer addition method (wet vs. dry) on mixing efficiency inside the extruder barrel was investigated by means of different tracers: riboflavin (0.05%) suspended in the granulation liquid and hydrochlorothiazide (2.5%) added separately as powder. Mixing efficiency in function of time and granule size (above and below 1400 microm) was tested using riboflavine sodium phosphate (0.05%) dissolved in the granulation liquid. Since a good mixing efficiency was obtained independent of tracer addition method, tracer solubility, granulation time and granule size, continuous granulation using a twin-screw extruder was identified as a robust process.

  9. Inline real-time near-infrared granule moisture measurements of a continuous granulation-drying-milling process.

    Science.gov (United States)

    Chablani, Lipika; Taylor, Michael K; Mehrotra, Amit; Rameas, Patrick; Stagner, William C

    2011-12-01

    The purpose of this research was to use inline real-time near-infrared (NIR) to measure the moisture content of granules manufactured using a commercial production scale continuous twin-screw granulator fluid-bed dryer milling process. A central composite response surface statistical design was used to study the effect of inlet air temperature and dew point on granule moisture content. The NIR moisture content was compared to Karl Fischer (KF) and loss on drying (LOD) moisture determinations. Using multivariate analysis, the data showed a statistically significant correlation between the conventional methods and NIR. The R(2) values for predicted moisture content by NIR versus KF and predicted moisture values by NIR versus LOD were 0.94 (p < 0.00001) and 0.85 (p < 0.0002), respectively. The adjusted R(2) for KF versus LOD correlation was 0.85 (p < 0.0001). Analysis of the response surface design data showed that inlet air temperature over a range of 35-55°C had a significant linear impact on granule moisture content as measured by predicted NIR (adjusted R(2) = 0.84, p < 0.02), KF (adjusted R(2) = 0.91, p < 0.0001), and LOD (adjusted R(2) = 0.85, p < 0.0006). The inlet air dew point range of 10-20°C did not have a significant impact on any of the moisture measurements.

  10. High-rate hydrogenotrophic methanogenesis for biogas upgrading: the role of anaerobic granules.

    Science.gov (United States)

    Xu, Heng; Gong, Shufen; Sun, Yuanzi; Ma, Hailing; Zheng, Mingyue; Wang, Kaijun

    2015-01-01

    Hydrogenotrophic methanogenesis has been proved to be a feasible biological method for biogas upgrading. To improve its performance, the feasibility of typical anaerobic granules as the inoculum was investigated in both batch and continuous experiments. The results from batch experiments showed that glucose-acclimated granules seemed to perform better than granules acclimated to acidified products (AP, i.e. acetate, propionate and ethanol) in in situ biogas upgrading systems and a slightly higher H2 consumption rate (1.5 mmol H2 g VSS(-1) h(-1)) was obtained for glucose-acclimated granules. For AP-acclimated granules, the inhibition on anaerobic digestion and pH increase (up to 9.55±0.16) took place, and the upgrading performance was adversely affected. In contrast, better performance for AP-acclimated granules was observed in ex situ systems, possibly due to their higher hydrogenotrophic methanogenic activities (HMA). Moreover, when gas-liquid mass transfer limitations were alleviated, the upgrading performance was significantly improved (three-fold) for both glucose-acclimated and AP-acclimated granules. The HMA of anaerobic granules could be further enhanced to improve biogas upgrading performance via continuous cultivation with H2/CO2 as the sole substrate. During the three months' cultivation, secondary granulation and microbial population shift were observed, but anaerobic granules still remained intact and their HMA increased from 0.2 to 0.6 g COD g VSS(-1) d(-1). It indicated that the formation of hydrogenotrophic methanogenic granules, a new type of anaerobic granules specialized for high-rate hydrogenotrophic methanogenesis and biogas upgrading, might be possible. Conclusively, anaerobic granules showed great potential for biogas upgrading.

  11. β-TCP granules mixed with reticulated hyaluronic acid induce an increase in bone apposition.

    Science.gov (United States)

    Aguado, Eric; Pascaretti-Grizon, Florence; Gaudin-Audrain, Christine; Goyenvalle, Eric; Chappard, Daniel

    2014-02-01

    β beta-tricalcium phosphate (β-TCP) granules are suitable for repair of bone defects. They have an osteoconductive effect shortly after implantation. However, dry granules are difficult to handle in the surgical room because of low weight and lack of cohesion. Incorporation of granules in a hydrogel could be a satisfactory solution. We have investigated the use of hyaluronic acid (HyA) as an aqueous binder of the granules. β-TCP granules were prepared by the polyurethane foam technology. Commercially available linear (LHya) and reticulated hyaluronic acid (RHyA) in aqueous solution were used to prepare a pasty mixture that can be handled more easily than granules alone. Thirteen New Zealand White rabbits (3.5-3.75 kg) were used; a 4 mm hole was drilled in each femoral condyle. After flushing, holes were filled with either LHyA, RHyA, dry β-TCP granules alone, β-TCP granules + LHyA and β-TCP granules + RHyA. Rabbits were allowed to heal for one month, sacrificed and femurs were harvested and analysed by microCT and histomorphometry. The net amount of newly formed bone was derived from measurements done after thresholding the microCT images for the material and for the material+bone. LHyA and RHyA did not result in healing of the grafted area. LHyA was rapidly eluted from the grafted zone but allowed deposition of more granules, although the amount of formed bone was not significantly higher than with β-TCP granules alone. RHyA permitted the deposition of more granules which induced significantly more bone trabeculae without inducing an inflammatory reaction. RHyA appears to be a good vehicle to implant granules of β-TCP, since HyA does not interfere with bone remodeling.

  12. Quantitative Assessment of Mass Flow Boundaries in Continuous Twin-screw Granulation.

    Science.gov (United States)

    Schmidt, Adrian; de Waard, Hans; Moll, Klaus-Peter; Krumme, Markus; Kleinebudde, Peter

    2016-01-01

    In pharmaceutical manufacturing, there is an increasing interest in continuous manufacturing. As an example for fast continuous processes in general of considerable complexity, this study was focussed on improving the understanding of twin-screw wet granulation. The impact of the liquid-to-solid (L/S) mass flow ratio on product quality (granules) as well as on downstream process operations (tableting) was investigated in detail. Initially two methods were used to define L/S ratio boundaries for the granulation regime in twin-screw wet granulation. It was shown that the first method, which is based on measuring the wet granule mass flow variation, can be used to define the upper L/S ratio boundary of the granulation regime. The second method, based on measuring the granule size distribution, can be used to define the lower L/S ratio boundary of the regime. Using these methods, the granulation regime for different formulations could be established. This information was then used to show that the formulation could be optimised such that the process is more robust (i.e. wider L/S ratio boundaries for the granulation regime). Also it could be used to optimise the formulation considering further downstream processing such as drying (using as little water as possible to reduce drying efforts) or tableting (obtain granules with optimised tableting properties). Preferably, the process should be performed close to the lower L/S ratio boundary of the granulation regime. In summary, these tools enabled the quantitative establishment of granulation regime boundaries in a twin-screw wet granulation process and can be used to optimise formulation and to create a robust process. Analogies to other continuous processes in completely different applications can be conceived.

  13. Horizontal segregation of mono-layer granules coordinated by vertical motion.

    Science.gov (United States)

    Liaw, S-Y; Chung, F F; Liaw, S-S

    2011-06-01

    We experimentally investigate the segregation of a binary mixture of spherical beads confined between two horizontal vertically vibrating plates. The two kinds of beads are of equal diameter and mass but have different restitution coefficients. Segregation occurs in particular ranges of vibration amplitude and frequency. We find that the collisions between beads at an angle to the horizontal plane induce an effective horizontal repulsive force. When one or both bead types bounce up and down in synchronization, the effective repulsive force between the two types of beads is likely to be larger than that found within a single bead type, resulting in the mixture segregating. Non-horizontal collisions also play a role in stabilizing the segregation state by transferring the horizontal kinetic energy back into vertical motion.

  14. Microbial Aggregate and Functional Community Distribution in a Sequencing Batch Reactor with Anammox Granules

    KAUST Repository

    Sun, Shan

    2013-05-01

    Anammox (anaerobic ammonium oxidation) process is a one-step conversion of ammonia into nitrogen gas with nitrite as an electron acceptor. It has been developed as a sustainable technology for ammonia removal from wastewater in the last decade. For wastewater treatment, anammox biomass was widely developed as microbial aggregate where the conditions for enrichment of anammox community must be delicately controlled and growth of other bacteria especially NOB should be suppressed to enhance nitrogen removal efficiency. Little is known about the distribution of microbial aggregates in anammox process. Thus the objective of our study was to assess whether segregation of biomass occurs in granular anammox system. In this study, a laboratory-scale sequential batch reactor (SBR) was successfully operated for a period of 80 days with granular anammox biomass. Temporal and spatial distribution of microbial aggregates was studied by particle characterization system and the distribution of functional microbial communities was studied with qPCR and 16s rRNA amplicon pyrosequencing. Our study revealed the spatial and temporal distribution of biomass aggregates based on their sizes and density. Granules (>200 μm) preferentially accumulated in the bottom of the reactor while floccules (30-200 μm) were relatively rich at the top layer. The average density of aggregate was higher at the bottom than the density of those at the top layer. Degranulation caused by lack of hydrodynamic shear force in the top layer was considered responsible for this phenomenon. NOB was relatively rich in the top layer while percentage of anammox population was higher at the bottom, and anammox bacteria population gradually increased over a period of time. NOB growth was supposed to be associated with the increase of floccules based on the concurrent occurrence. Thus, segregation of biomass can be utilized to develop an effective strategy to enrich anammox and wash out NOB by shortening the settling

  15. Hydrogen sulfide induces hyperpolarization and decreases the exocytosis of secretory granules of rat GH3 pituitary tumor cells.

    Science.gov (United States)

    Mustafina, Alsu N; Yakovlev, Aleksey V; Gaifullina, Aisylu Sh; Weiger, Thomas M; Hermann, Anton; Sitdikova, Guzel F

    2015-10-02

    The aim of the present study was to evaluate the effects of hydrogen sulfide (H2S) on the membrane potential, action potential discharge and exocytosis of secretory granules in neurosecretory pituitary tumor cells (GH3). The H2S donor - sodium hydrosulfide (NaHS) induced membrane hyperpolarization, followed by truncation of spontaneous electrical activity and decrease of the membrane resistance. The NaHS effect was dose-dependent with an EC50 of 152 μM (equals effective H2S of 16-19 μM). NaHS effects were not altered after inhibition of maxi conductance calcium-activated potassium (BK) channels by tetraethylammonium or paxilline, but were significantly reduced after inhibition or activation of ATP-dependent potassium channels (KATP) by glibenclamide or by diazoxide, respectively. In whole-cell recordings NaHS increased the amplitude of KATP currents, induced by hyperpolarizing pulses and subsequent application of glibenclamide decreased currents to control levels. Using the fluorescent dye FM 1-43 exocytosis of secretory granules was analyzed in basal and stimulated conditions (high K(+) external solution). Prior application of NaHS decreased the fluorescence of the cell membrane in both conditions which links with activation of KATP currents (basal secretion) and activation of KATP currents and BK-currents (stimulated exocytosis). We suggest that H2S induces hyperpolarization of GH3 cells by activation of KATP channels which results in a truncation of spontaneous action potentials and a decrease of hormone release.

  16. Secondary emission electron gun using external primaries

    Science.gov (United States)

    Srinivasan-Rao, Triveni; Ben-Zvi, Ilan

    2009-10-13

    An electron gun for generating an electron beam is provided, which includes a secondary emitter. The secondary emitter includes a non-contaminating negative-electron-affinity (NEA) material and emitting surface. The gun includes an accelerating region which accelerates the secondaries from the emitting surface. The secondaries are emitted in response to a primary beam generated external to the accelerating region. The accelerating region may include a superconducting radio frequency (RF) cavity, and the gun may be operated in a continuous wave (CW) mode. The secondary emitter includes hydrogenated diamond. A uniform electrically conductive layer is superposed on the emitter to replenish the extracted current, preventing charging of the emitter. An encapsulated secondary emission enhanced cathode device, useful in a superconducting RF cavity, includes a housing for maintaining vacuum, a cathode, e.g., a photocathode, and the non-contaminating NEA secondary emitter with the uniform electrically conductive layer superposed thereon.

  17. Secondary emission electron gun using external primaries

    Science.gov (United States)

    Srinivasan-Rao, Triveni; Ben-Zvi, Ilan; Kewisch, Jorg; Chang, Xiangyun

    2007-06-05

    An electron gun for generating an electron beam is provided, which includes a secondary emitter. The secondary emitter includes a non-contaminating negative-electron-affinity (NEA) material and emitting surface. The gun includes an accelerating region which accelerates the secondaries from the emitting surface. The secondaries are emitted in response to a primary beam generated external to the accelerating region. The accelerating region may include a superconducting radio frequency (RF) cavity, and the gun may be operated in a continuous wave (CW) mode. The secondary emitter includes hydrogenated diamond. A uniform electrically conductive layer is superposed on the emitter to replenish the extracted current, preventing charging of the emitter. An encapsulated secondary emission enhanced cathode device, useful in a superconducting RF cavity, includes a housing for maintaining vacuum, a cathode, e.g., a photocathode, and the non-contaminating NEA secondary emitter with the uniform electrically conductive layer superposed thereon.

  18. Effects of hydraulic retention time on aerobic granulation and granule growth kinetics at steady state with a fast start-up strategy.

    Science.gov (United States)

    Liu, Yong-Qiang; Zhang, Xing; Zhang, Rui; Liu, Wen-Tso; Tay, Joo-Hwa

    2016-01-01

    A hydraulic retention time (HRT) of 4, 6, and 8 h was employed, respectively, in three reactors to study the effects of HRT on granulation with a newly developed fast granulation strategy, i.e., a strategy by combining strong hydraulic selection pressure with high organic loading rate (OLR). Granules with clear boundary appeared within 24 h after reactor start-up and all reactors reached a pseudo steady state after 6-day operation. A 4-h HRT resulted in a relatively higher increasing rate in terms of granule size during granule development period, i.e., 208 μm day(-1), and the bigger granule size and the higher sludge volume index at the pseudo steady state. For HRT of 6 or 8 h, no obvious difference was observed. However, it was found that HRT influenced sludge retention time (SRT) and kinetics significantly. A HRT changing from 4 to 8 h led to an increased SRT from 3 to 21 days, a decreased observed specific biomass growth rate (μ obs) and an decreased observed biomass yield (Y obs) of stable granules from 0.37 to 0.062 days(-1), and 0.177 to 0.055 g MLVSS g(-1) COD, respectively. Both μ obs and Y obs had a linear relationship with the reciprocal of HRT. In addition, the great difference of microbial community between seed sludge, sludge retained in the reactors, and sludge washed out indicated a strong microbial selection for fast granulation within 24 h. However, during the granule development period from day 1 to 6, no more microbial selection was observed except an adjustment of microbial community. Little influence of HRT on microbial population in granular sludge indicated a minor role of HRT played for granulation with the fast start-up strategy adopted in this study. The results demonstrated that hydraulic selection pressure for granulation was mainly from short settling time, which led to strong microbial selection during the granulation period. Meanwhile, although HRT did not affect granulation with the fast start-up strategy, it played an

  19. An observation on sludge granulation in an enhanced biological phosphorus removal process.

    Science.gov (United States)

    Ong, Ying Hui; Chua, Adeline Seak May; Lee, Boon Pin; Ngoh, Gek Cheng; Hashim, Mohd Ali

    2012-01-01

    A sequencing batch reactor (SBR) seeded with flocculated sludge and fed with synthetic wastewater was operated for an enhanced biological phosphorus removal (EBPR) process. Eight weeks after reactor startup, sludge granules were observed. The granules had a diameter of 0.5 to 3.0 mm and were brownish in color and spherical or ellipsoidal in shape. No significant change was observed in sludge granule size when operational pH was changed from 7 to 8. The 208-day continuous operation of the SBR showed that sludge granules were stably maintained with a sludge volume index (SVI) between 30 to 55 mL/g while securing a removal efficiency of 83% for carbon and 97% for phosphorus. Fluorescent in situ hybridization (FISH) confirmed the enrichment of polyphosphate accumulating organisms (PAOs) in the SBR. The observations of sludge granulation in this study encourage further studies in the development of granules-based EBPR process.

  20. Theoretical and Experimental Studies on a Cylinder Containing Granules Rolling Down an Inclined Plane

    CERN Document Server

    Wibowo, Edy; Rokhmat, Mamat; Yuliza, Elfi; Khairurrijal,; Abdullah, Mikrajuddin

    2014-01-01

    The dynamics of a hollow cylinder containing granules and rolling down an inclined plane was investigated. A theoretical approach for investigating the behaviour of such a cylinder was proposed. The critical angle of the plane that allows the system to roll downward is presented. A simple experiment using six types of granules consistently confirmed the theoretical predictions. We showed that the critical angle is independent of the size distribution of the granules. We observed that the sliding angle of granules inside the cylinder is constant and, surprisingly, similar to the avalanche angle of the granules. Our theoretical prediction can be used to determine the critical angle without considering the shape, surface roughness and size distribution of the granules. Additionally, we derived the oscillation frequency of the system when it is slightly deviated from equilibrium, showing the frequency initially increases and then decreases with increasing granular volume. The oscillation is absent when the cylind...

  1. Single granule cells reliably discharge targets in the hippocampal CA3 network in vivo.

    Science.gov (United States)

    Henze, Darrell A; Wittner, Lucia; Buzsáki, György

    2002-08-01

    Processing of neuronal information depends on interactions between the anatomical connectivity and cellular properties of single cells. We examined how these computational building blocks work together in the intact rat hippocampus. Single spikes in dentate granule cells, controlled intracellularly, generally failed to discharge either interneurons or CA3 pyramidal cells. In contrast, trains of spikes effectively discharged both CA3 cell types. Increasing the discharge rate of the granule cell increased the discharge probability of its target neuron and decreased the delay between the onset of a granule cell train and evoked firing in postsynaptic targets. Thus, we conclude that the granule cell to CA3 synapses are 'conditional detonators,' dependent on granule cell firing pattern. In addition, we suggest that information in single granule cells is converted into a temporal delay code in target CA3 pyramidal cells and interneurons. These data demonstrate how a neural circuit of the CNS may process information.

  2. Evaluation of an in-line particle imaging tool for monitoring twin-screw granulation performance

    DEFF Research Database (Denmark)

    Kumar, Ashish; Dhondt, Jens; De Leersnyder, Fien;

    2015-01-01

    ). The volumetric size distribution obtained from the in-line measurements of the granules leaving the twin-screw granulator using the Eyecon™ camera was compared with the off-line measurements obtainedby sieving of the granule samples collected before and after the drying unit operation. For the intermediate size...... range (diameter 250–1000 μm), the Eyecon™ measurements showed to be promising as they were in agreement with off-line measurement results obtained before the drying unit. However, the image analysis algorithm and data post-processing of the Eyecon™ images for the fines and oversized ranges require......Twin-screw granulation is an emerging continuous wet granulation technique in the pharmaceutical industry due to several advantages over batch granulation. However, for the implementation of a fully continuous linein an industrial environment, in-process measurement tools are required to monitor...

  3. External fixators in haemophilia.

    Science.gov (United States)

    Lee, V; Srivastava, A; PalaniKumar, C; Daniel, A J; Mathews, V; Babu, N; Chandy, M; Sundararaj, G D

    2004-01-01

    External fixators (EF) are not commonly used for patients with haemophilia. We describe the use of EF (Ilizarov, AO- uni- and bi-planar fixators and Charnley clamp) in nine patients (mean age: 19.2 years; range: 9-37) with haemophilia for the following indications - arthrodesis of infected joints, treatment of open fractures and osteoclasis. EF required an average of nine skin punctures [range: 4-17 were maintained for a period of 15 weeks (range: 8-29.5), without regular factor replacement, till bone healing was adequate and were removed with a single dose of factor infusion]. The mean preoperative factor level achieved was 85% (range: 64-102%). Much lower levels were subsequently maintained till wound healing. The average total factor consumption was 430 IU kg(-1) (range: 240-870), administered over a period of 17 days (range: 9-44). There were no major complications related to EF except in a patient who developed inhibitors. In conclusion, EF can be used safely in haemophilic patients who do not have inhibitors and does not require prolonged factor replacement.

  4. Effect of bioglass granules on the physico-chemical properties of brushite cements

    Energy Technology Data Exchange (ETDEWEB)

    Bohner, M. [Robert Mathys Foundation, Bettlach (Switzerland); Matter, S. [Stratec Medical, Oberdorf (Switzerland)

    2001-07-01

    Bioglass granules were added to a brushite cement in an attempt to neutralize the cement paste after setting. Results show that the pH of the cement paste was drastically increased by the addition of these granules. However, the setting time and the mechanical properties of the cement were strongly reduced. Therefore, the addition of bioglass granules is not a good way to modify the acidity of the cement paste after setting. (orig.)

  5. Characteristics of aerobic granules grown on glucose a sequential batch shaking reactor

    Institute of Scientific and Technical Information of China (English)

    CAI Chun-guang; ZHU Nan-wen; LIU Jun-shen; WANG Zhen-peng; CAI Wei-min

    2004-01-01

    Aerobic heterotrophic granular sludge was cultivated in a sequencing batch shaking reactor(SBSR) in which a synthetic wastewater containing glucose as carbon source was fed. The characteristics of the aerobic granules were investigated. Compared with the conventional activated sludge flocs, the aerobic granules exhibit excellent physical characteristics in terms of settleability, size, shape, biomass density, and physical strength.Scanning electron micrographs revealed that in mature granules little filamentous bacteria could be found, rodshaped and coccoid bacteria were the dominant microorganisms.

  6. Developing wax-based granule formulations for mating disruption of oriental beetles (Coleoptera: Scarabaeidae) in turfgrass.

    Science.gov (United States)

    Behle, R W; Cossé, A A; Dunlap, C; Fisher, J; Koppenhöfer, A M

    2008-12-01

    Oriental beetle, Anomala orientalis Waterhouse (Coleoptera: Scarabaeidae), is a pest of turfgrass that may be controlled by applications of synthetic pheromone (Z)-/ (E)-7-tetradecen-2-one to disrupt mating. Laboratory experiments were conducted to determine release profiles of pheromone from experimental wax-based granules, a proprietary wax granule, and rubber septa commonly used in pheromone traps. Rubber septa loaded with 10, 100, and 300 microg per septum provided steady rates of pheromone release (zero-order) over 4 wk of laboratory evaluation (total = 1.1, 9.0, and 26.9 microg/4 wk, respectively). Septa with 1,000 microg per septum had a significant decline in the rate of pheromone release for this 4-wk exposure time (total = 119 microg/4 wk). A large proprietary wax granule (44 mg per granule, 25% wt:wt pheromone) provided a steady rate of pheromone release (total = 2,347 microg/4 wk per granule). Experimental granules (16 mg per granule) made of soywax with higher pheromone loads (10% wt:wt) approached zero-order release (steady state) (total = 69 microg/4 wk per granule), whereas smaller granules (4 mg per granule) with less pheromone (0.1% wt:wt) provided first-order release profiles (decreasing rate with longer exposure time) (total = 0.35 microg/4 wk per granule). A field trial in turfgrass demonstrated the potential of selected granular formulations to provide effective mating disruption for up to 4 wk, as measured by pheromone trap shutdown. Documenting pheromone release profiles for these experimental granules and rubber septa provides valuable information that will support future field evaluations of mating disruption as a control strategy.

  7. Comparison of A and B Starch Granules from Three Wheat Varieties

    Directory of Open Access Journals (Sweden)

    Haiyan Gao

    2011-12-01

    Full Text Available Three starches from the wheat varieties AK58, ZM18 and YZ4110 were separated into large (A and small (B granules, which were characterized structurally and evaluated for their functional properties. SEM results showed that the size of A-granules from ZM18 and YZ4110 were about the same, but the sizes of A-granules and B-granules from AK58 were larger than those of ZM18 and YZ4110. FTIR spectra showed that all the samples exhibited a similar pattern, with seven main modes with maximum absorbance peaks near 3,500, 3,000, 1,600, 1,400, 1,000, 800, 500 cm−1. The B-granules of ZM18 and YZ4110 had less amylose content, although the difference among the total amylose contents of the three unfractionated starches was not significant. X-ray diffraction (XRD patterns showed predominantly A-type crystallinity for all the starches. The A-granules showed sharper XRD patterns than the other starches. DSC analysis showed that the A-granules had broader ranges of gelatinization temperatures than the B-granules from the same wheat variety. The gelatinization enthalpy (ΔH of A-granules was higher than that of B-granules. AK58 exhibited the smallest enthalpy, while ZM18 showed the largest enthalpy. In pasting tests, the A-granule starch of AK58 had higher peak, final and setback viscosity, lower breakdown and pasting temperature, and the B-granule starch and unfractionated starch of AK58 had lower peak, breakdown, final and setback viscosity and higher pasting temperature than ZM18 and YZ4110.

  8. Continuous twin screw granulation of controlled release formulations with various HPMC grades.

    Science.gov (United States)

    Vanhoorne, V; Janssens, L; Vercruysse, J; De Beer, T; Remon, J P; Vervaet, C

    2016-09-25

    HPMC is a popular matrix former to formulate tablets with extended drug release. Tablets with HPMC are preferentially produced by direct compression. However, granulation is often required prior to tableting to overcome poor flowability of the formulation. While continuous twin screw granulation has been extensively evaluated for granulation of immediate release formulations, twin screw granulation of controlled release formulations including the dissolution behavior of the formulations received little attention. Therefore, the influence of the HPMC grade (viscosity and substitution degree) and the particle size of theophylline on critical quality attributes of granules (continuously produced via twin screw granulation) and tablets was investigated in the current study. Formulations with 20 or 40% HPMC, 20% theophylline and lactose were granulated with water at fixed process parameters via twin screw granulation. The torque was influenced by the viscosity and substitution degree of HPMC, but was not a limiting factor for the granulation process. An optimal L/S ratio was selected for each formulation based on the granule size distribution. The granule size distributions were influenced by the substitution degree and concentration of HPMC and the particle size of theophylline. Raman and UV spectroscopic analysis on 8 sieve fractions of granules indicated an inhomogeneous distribution of theophylline over the size fractions. However, this phenomenon was not correlated with the hydration rate or viscosity of HPMC. Controlled release of theophylline could be obtained over 24h with release profiles close to zero-order. The release of theophylline could be tailored via selection of the substitution degree and viscosity of HPMC.

  9. Dynamic changes of [Ca2+]i in cerebellar granule cells exposed to pulsed electric fields

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Intracellular free Ca2+ concentration ([Ca2+]i) in embryonic chick cerebellar granule cells loaded with fluo-3/AM and exposed to a single pulsed electric field was investigated using a confocal laser scanning microscope and fluorescent microscope equipped with CCD video imaging system.The results showed that [Ca2+]i increased immediately and rose to the peak rapidly as the cells exposed to a single pulsed electric field.The amplitude and rate of the increases of [Ca2+]i depend on the intensity of external electric field.In the presence of Ca2+ chelant EGTA or Ca2+ channels blocker La3+ in the pulsation solutions,the increase of [Ca2+]i was still observable.It was also observed that [Ca2+]i of different intracellular areas in the cell elevated simultaneously while the peak of the increase of [Ca2+]i in the poles of the cell preceded to the peak in its somata and recovered to a plateau within a short time.

  10. Dynamic changes of [Ca2+]i in cerebellar granule cells exposed to pulsed electric fields

    Institute of Scientific and Technical Information of China (English)

    陈雅; 王彦; 孙彤; 张锦珠; 景向红; 李瑞午

    2000-01-01

    Intracellular free Ca2+ concentration ([Ca2+]i) in embryonic chick cerebellar granule cells loaded with fluo-3/AM and exposed to a single pulsed electric field was investigated using a confocal laser scanning microscope and fluorescent microscope equipped with CCD video imaging system. The results showed that [Ca2+]i increased immediately and rose to the peak rapidly as the cells exposed to a single pulsed electric field. The amplitude and rate of the increases of [Ca2+]i depend on the intensity of external electric field. In the presence of Ca2+ chelant EGTA or Ca2+ channels blocker La3+ in the pulsation solutions, the increase of [Ca2+]i was still observable. It was also observed that [Ca2+]i of different intracellular areas in the cell elevated simultaneously while the peak of the increase of [Ca2+]i in the poles of the cell preceded to the peak in its somata and recovered to a plateau within a short time.

  11. Skepticism, contextualism, externalism and modality

    National Research Council Canada - National Science Library

    Ron Wilburn

    2006-01-01

    .... However, because efforts to contextualize externalism via subjunctive conditional analysis court circularity, it is only on an internalistic interpretation that contextualist strategies can even be motivated...

  12. Expression of an engineered granule-bound Escherichia coli glycogen branching enzyme in potato results in severe morphological changes in starch granules.

    Science.gov (United States)

    Huang, Xing-Feng; Nazarian-Firouzabadi, Farhad; Vincken, Jean-Paul; Ji, Qin; Suurs, Luc C J M; Visser, Richard G F; Trindade, Luisa M

    2013-05-01

    The Escherichia coli glycogen branching enzyme (GLGB) was fused to either the C- or N-terminus of a starch-binding domain (SBD) and expressed in two potato genetic backgrounds: the amylose-free mutant (amf) and an amylose-containing line (Kardal). Regardless of background or construct used, a large amount of GLGB/SBD fusion protein was accumulated inside the starch granules, however, without an increase in branching. The presence of GLGB/SBD fusion proteins resulted in altered morphology of the starch granules in both genetic backgrounds. In the amf genetic background, the starch granules showed both amalgamated granules and porous starch granules, whereas in Kardal background, the starch granules showed an irregular rough surface. The altered starch granules in both amf and Kardal backgrounds were visible from the initial stage of potato tuber development. High-throughput transcriptomic analysis showed that expression of GLGB/SBD fusion protein in potato tubers did not affect the expression level of most genes directly involved in the starch biosynthesis except for the up-regulation of a beta-amylase gene in Kardal background. The beta-amylase protein could be responsible for the degradation of the extra branches potentially introduced by GLGB.

  13. Understanding the impact of influent nitrogen concentration on granule size and microbial community in a granule-based enhanced biological phosphorus removal system.

    Science.gov (United States)

    Zou, Jinte; Li, Yongmei; Zhang, Lili; Wang, Ruyi; Sun, Jing

    2015-02-01

    To better understand the effect of influent nitrogen concentration on granule size and microbial community in a granule-based enhanced biological phosphorus removal system, three influent nitrogen concentrations were tested while carbon concentration was an unlimited factor. The results show that although ammonium and phosphate were well removed in the tested nitrogen concentration range (20-50 mg L(-1)), granule size, the amount of phosphate accumulating organisms (PAOs) and microbial activity were affected significantly. A possible mechanism for the effect of influent nitrogen concentration on granule size is proposed based on the experimental results. The increase in proteins/polysaccharides ratio caused by high influent nitrogen concentration plays a crucial role in granule breakage. The small granule size then weakens simultaneous nitrification-denitrification, which further causes higher nitrate concentration in the effluent and lower amount of PAOs in sludge. Consequently, phosphate concentration in the anaerobic phase decreases, which plays the secondary role in granule breakage. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. 植酸酶颗粒剂生产工艺的研究%Study on Production Technology of Phytase Granules

    Institute of Scientific and Technical Information of China (English)

    张渊舒; 罗琴; 攸德伟

    2011-01-01

    Through optimizing the external conditions influential to role of phytase, selecting low- cost coating materials and simple coating technology, the author developed the coated and temperature - tolerant type phytase granule Ruifeng P 5000 ( Reyphon P 5000 -CT).The main technical innovations of Reyphon P 5000 -CT are: using the coating technology to indirectly improve the heat resistance of phytase; optimizing the formula of the assisted materials.This product has obviously better temperature resistance, stability of granule - preparing, storage stability and granule uniformity than the similar domestic products.%笔者采用优化影响植酸酶发挥作用的外部条件的方法,通过选择成本低廉的包衣材料和简单的包衣工艺,研制开发了包衣耐温型植酸酶颗粒剂瑞丰磷5000(Reyphon P 5000-CT),其主要技术创新点为:采用包衣技术间接提高植酸酶的耐热性、优化辅料配方.该产品在耐温性、制粒稳定性、储藏稳定性以及颗粒均匀度等方面都远远优于国内同类产品.

  15. DEM Modelling of Granule Rearrangement and Fracture Behaviours During a Closed-Die Compaction.

    Science.gov (United States)

    Furukawa, Ryoichi; Kadota, Kazunori; Noguchi, Tetsuro; Shimosaka, Atsuko; Shirakawa, Yoshiyuki

    2017-01-26

    The closed-die compaction behaviour of D-mannitol granules has been simulated by the discrete element method (DEM) to investigate the granule rearrangement and fracture behaviour during compaction which affects the compactibility of the tablet. The D-mannitol granules produced in a fluidized bed were modelled as agglomerates of primary particles connected by linear spring bonds. The validity of the model granule used in the DEM simulation was demonstrated by comparing to the experimental results of a uniaxial compression test. During uniaxial compression, the numerical results of the force-displacement curve corresponded reasonably well to the experimental data. The closed-die compaction of the modelled granules was carried out to investigate the rearrangement and fracture behaviours of the granule at different upper platen velocities. The forces during closed-die compaction calculated by DEM fluctuated in the low-pressure region due to the rearrangement of granules. A Heckel analysis showed that the force fluctuation occurred at the initial bending region of the Heckel plot, which represents the granule rearrangement and fracture. Furthermore, the upper platen velocity affected the trend of compaction forces, which can lead to compaction failure due to capping. These results could contribute to designing the appropriate granules during closed-die compaction.

  16. Digital image analysis of starch granules for recognizing hard red and soft red winter wheats

    Science.gov (United States)

    Zayas, Inna Y.; Bechtel, D. B.; Wilson, J. D.; Dempster, Richard E.

    1993-05-01

    The relationship between isolated starch granule morphometry and wheat hardness was studied. Starch granule size and shape may relate to grain millability, rheological properties of dough, and baking quality. Twenty four Kansas wheats were studied: 14 hard red winter (HRW) and 10 soft red winter (SRW). Isolated starch granules were viewed with light microscopy to obtain black and white images which were recorded on video tape. A program was designed to keep track of the taped images and measure starch granules without operator intervention. The data base of starch granule size and shape features of the 24 samples contained 152,237 granule observations. The number of observations per sample varied from 3,238 to 14,671. Distinguishing HRW from SRW wheat samples was accomplished by evaluation of starch granule morphometry. Several data manipulations and transformations were performed in analysis of the data. Information carried in two shape descriptors, which reflect aspect ratio and equivalent diameter distribution, was used to distinguish starch granules of HRW and SRW wheats. The percentage of starch granules in the aspect ratio range of 1.65 - 1.95 was 25.8 - 31.5% for HRW and 19.9 - 25.4% for SRW.

  17. CSR-1 and P granules suppress sperm-specific transcription in the C. elegans germline.

    Science.gov (United States)

    Campbell, Anne C; Updike, Dustin L

    2015-05-15

    Germ granules (P granules) in C. elegans are required for fertility and function to maintain germ cell identity and pluripotency. Sterility in the absence of P granules is often accompanied by the misexpression of soma-specific proteins and the initiation of somatic differentiation in germ cells. To investigate whether this is caused by the accumulation of somatic transcripts, we performed mRNA-seq on dissected germlines with and without P granules. Strikingly, we found that somatic transcripts do not increase in the young adult germline when P granules are impaired. Instead, we found that impairing P granules causes sperm-specific mRNAs to become highly overexpressed. This includes the accumulation of major sperm protein (MSP) transcripts in germ cells, a phenotype that is suppressed by feminization of the germline. A core component of P granules, the endo-siRNA-binding Argonaute protein CSR-1, has recently been ascribed with the ability to license transcripts for germline expression. However, impairing CSR-1 has very little effect on the accumulation of its mRNA targets. Instead, we found that CSR-1 functions with P granules to prevent MSP and sperm-specific mRNAs from being transcribed in the hermaphrodite germline. These findings suggest that P granules protect germline integrity through two different mechanisms, by (1) preventing the inappropriate expression of somatic proteins at the level of translational regulation, and by (2) functioning with CSR-1 to limit the domain of sperm-specific expression at the level of transcription.

  18. [Solution kinetics of magnesium oxide containing granules produced by laboratory scale fluidization].

    Science.gov (United States)

    Rácz, I; Zelkó, R; Bihari, E

    1994-09-01

    In practice of manufacturing industrial pharmaceutical products, the technique of fluidization has been used extensively in the past decades. The authors studied the magnesium oxide-containing granulates made by fluidization granulation in laboratory, to optimize the process, to determine the neutralization kinetic parameters of granulates, to establish the connections between the method of granulation and the release of active substances. According to our findings, the pharmaceutical product's characteristics in the aspects of physics, chemistry, stability and bioavailability may remarkably change without fixing the border conditions of parameters within limits.

  19. Who Regulates Whom? An Overview of RNA Granules and Viral Infections

    Directory of Open Access Journals (Sweden)

    Natalia Poblete-Durán

    2016-06-01

    Full Text Available After viral infection, host cells respond by mounting an anti-viral stress response in order to create a hostile atmosphere for viral replication, leading to the shut-off of mRNA translation (protein synthesis and the assembly of RNA granules. Two of these RNA granules have been well characterized in yeast and mammalian cells, stress granules (SGs, which are translationally silent sites of RNA triage and processing bodies (PBs, which are involved in mRNA degradation. This review discusses the role of these RNA granules in the evasion of anti-viral stress responses through virus-induced remodeling of cellular ribonucleoproteins (RNPs.

  20. Biodegradation of p-cresol by aerobic granules in sequencing batch reactor

    Institute of Scientific and Technical Information of China (English)

    Farrukh Basheer; I.H.Farooqi

    2012-01-01

    The cultivation of aerobic granules in sequencing batch reactor for the biodegradation of p-cresol was studied.The reactor was started with 100 mg/L of p-cresol.Aerobic granules first appeared within one month of start up.The granules were large and strong and had a compact structure.The diameter of stable granules was in the range of 1-5 mm.The integrity coefficient and granules density was found to be 96% and 1046 kg/m3,respectively.The settling velocity of granules was found to be in the range of 2×10-2-6×10-2 m/sec.The aerobic granules were able to degrade p-cresol upto 800 mg/L at a removal efficiency of 88%.Specific p-cresol degradation rate in aerobic granules followed Haldane model for substrate inhibition.High specific p-cresol degradation rate up to 0.96 g pcresol/(g VSS.day) were sustained upto p-cresol concentration of 400 mg/L.Higher removal efficiency,good settling characteristics of aerobic granules,makes sequencing batch reactor suitable for enhancing the microorganism potential for biodegradation of inhibitory compounds.

  1. Role of the Caenorhabditis elegans multidrug resistance gene, mrp-4, in gut granule differentiation.

    Science.gov (United States)

    Currie, Erin; King, Brian; Lawrenson, Andrea L; Schroeder, Lena K; Kershner, Aaron M; Hermann, Greg J

    2007-11-01

    Caenorhabditis elegans gut granules are lysosome-related organelles with birefringent contents. mrp-4, which encodes an ATP-binding cassette (ABC) transporter homologous to mammalian multidrug resistance proteins, functions in the formation of gut granule birefringence. mrp-4(-) embryos show a delayed appearance of birefringent material in the gut granule but otherwise appear to form gut granules properly. mrp-4(+) activity is required for the extracellular mislocalization of birefringent material, body-length retraction, and NaCl sensitivity, phenotypes associated with defective gut granule biogenesis exhibited by embryos lacking the activity of GLO-1/Rab38, a putative GLO-1 guanine nucleotide exchange factor GLO-4, and the AP-3 complex. Multidrug resistance protein (MRP)-4 localizes to the gut granule membrane, consistent with it playing a direct role in the transport of molecules that compose and/or facilitate the formation of birefringent crystals within the gut granule. However, MRP-4 is also present in oocytes and early embryos, and our genetic analyses indicate that its site of action in the formation of birefringent material may not be limited to just the gut granule in embryos. In a search for genes that function similarly to mrp-4(+), we identified WHT-2, another ABC transporter that acts in parallel to MRP-4 for the formation of birefringent material in the gut granule.

  2. Comparison of Ca{sup 2+} and Mg{sup 2+} enhancing aerobic granulation in SBR

    Energy Technology Data Exchange (ETDEWEB)

    Liu Lin [School of Forestry, Northeast Forestry University, Harbin 150040 (China); Gao Dawen, E-mail: dawengao@gmail.com [School of Forestry, Northeast Forestry University, Harbin 150040 (China); State Key Laboratory of Urban Water Resource and Environment, 73 Huanghe Rd., Harbin 150090 (China); Zhang Min [School of Forestry, Northeast Forestry University, Harbin 150040 (China); Fu Yuan [State Key Laboratory of Urban Water Resource and Environment, 73 Huanghe Rd., Harbin 150090 (China)

    2010-09-15

    Two sequencing batch reactors (SBRs) were operated to investigate the effect of Ca{sup 2+} and Mg{sup 2+} augmentation on aerobic granulation. Reactor R1 was augmented with Ca{sup 2+} at 40 mg/L, while Mg{sup 2+} was added to the reactor R2 with 40 mg/L. Results showed that the reactor R1 had a faster granulation process compared with R2, and the mature granules in R1 showed better physical characteristics. However, the mature granules in R2 had the higher production yield of polysaccharides and proteins, and aerobic granules in R2 experienced a faster substrate biodegradation. Microbial and genetic characteristics in mature granules were analyzed using polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE) techniques. The results revealed that Mg{sup 2+} addition led to higher microbial diversity in mature granules. In addition, an uncultured bacterium (AB447697) was major specie in R1, and {beta}-proteobacterium was dominant in R2. It can be concluded that Ca{sup 2+} had an important effect on physical properties of aerobic granules, while Mg{sup 2+} played a key role on biological properties during the sludge granulation.

  3. Foam granulation: new developments in pharmaceutical solid oral dosage forms using twin screw extrusion machinery.

    Science.gov (United States)

    Thompson, M R; Weatherley, S; Pukadyil, R N; Sheskey, P J

    2012-07-01

    This paper investigates foam granulation in a twin screw extruder as a new continuous wet granulation technique for pharmaceutical powder drug formulations. Foamed aqueous binder has a reportedly lower soak-to-spread ratio than drop or spray liquid addition in batch granulation. This work demonstrates a twin screw extruder configuration for foam granulation and subsequently compares the new approach against liquid injection in the granulation of α-lactose monohydrate with a methylcellulose binder. Trials were conducted at high powder output rates (20-40 kg/h) and high screw speeds (220-320 RPM) with two screw configurations. Process stability improved with the new technique allowing granulation with less binder. The extruded mass maintained a low exit temperature, being insensitive to operating conditions unlike the liquid injection approach, where temperatures rose significantly as flow rate increased. The particle size distribution by foam granulation reflected a more uniformly wetted mass with larger granule growth noted even for conditions where dry powder exited by liquid injection. Other factors were found similar between the two binder delivery methods such as consumed mechanical energy, as well as fracture strength and compressibility of produced granules.

  4. The stealthy nano-machine behind mast cell granule size distribution.

    Science.gov (United States)

    Hammel, Ilan; Meilijson, Isaac

    2015-01-01

    The classical model of mast cell secretory granule formation suggests that newly synthesized secretory mediators, transported from the rough endoplasmic reticulum to the Golgi complex, undergo post-transitional modification and are packaged for secretion by condensation within membrane-bound granules of unit size. These unit granules may fuse with other granules to form larger granules that reside in the cytoplasm until secreted. A novel stochastic model for mast cell granule growth and elimination (G&E) as well as inventory management is presented. Resorting to a statistical mechanics approach in which SNAP (Soluble NSF Attachment Protein) REceptor (SNARE) components are viewed as interacting particles, the G&E model provides a simple 'nano-machine' of SNARE self-aggregation that can perform granule growth and secretion. Granule stock is maintained as a buffer to meet uncertainty in demand by the extracellular environment and to serve as source of supply during the lead time to produce granules of adaptive content. Experimental work, mathematical calculations, statistical modeling and a rationale for the emergence of nearly last-in, first out inventory management, are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. The diverse functions of germline P-granules in Caenorhabditis elegans.

    Science.gov (United States)

    Voronina, Ekaterina

    2013-08-01

    P-granules are conserved cytoplasmic organelles, similar to nuage, that are present in Caenorhabditis elegans germ cells. Based on the prevailing sterility phenotype of the component mutants, P-granules have been seen as regulators of germ cell development and function. Yet, specific germline defects resulting from P-granule failure vary, depending on which component(s) are inactivated, at which stage of development, as well as on the presence of stress factors during animal culture. This review discusses the unifying themes in many P-granule functions, with the main focus on their role as organizing centers nucleating RNA regulation in the germ cell cytoplasm.

  6. P granules phase transition induced by cytoplasmic streaming in Caenorhabditis elegans embryo

    Science.gov (United States)

    Wang, Hang; Hu, GuoHui

    2017-01-01

    P granules are germ granules contained in Caenorhabditis elegans germ cells. The first germ cell is specified by the one-cell embryo in which P granules localize to the posterior. Previous studies suggested that the mechanism of the localization phenomena is induced by liquid-liquid phase transition (LLPT), in which the polarity proteins control the saturation point of P granules. In the present study, we propose that the P granules phase transition can be triggered by the cytoplasmic streaming. A two-phase flow model is employed to simulate the localization of P granules, i.e., the cytoplasm is considered as a liquid phase, and the droplet-like P granules are another liquid phase. With the presence of the cytoplasmic streaming, P granules, initially distributing uniformly in the entire one-cell embryo, eventually condense/dissolve in the cytoplasm phase, regulated by difference between the saturation pressure and the hydrodynamic pressure. The numerical results reveal that the cytoplasmic streaming has significant effects on the localization of P granules, as well as the embryo division.

  7. Who Regulates Whom? An Overview of RNA Granules and Viral Infections

    Science.gov (United States)

    Poblete-Durán, Natalia; Prades-Pérez, Yara; Vera-Otarola, Jorge; Soto-Rifo, Ricardo; Valiente-Echeverría, Fernando

    2016-01-01

    After viral infection, host cells respond by mounting an anti-viral stress response in order to create a hostile atmosphere for viral replication, leading to the shut-off of mRNA translation (protein synthesis) and the assembly of RNA granules. Two of these RNA granules have been well characterized in yeast and mammalian cells, stress granules (SGs), which are translationally silent sites of RNA triage and processing bodies (PBs), which are involved in mRNA degradation. This review discusses the role of these RNA granules in the evasion of anti-viral stress responses through virus-induced remodeling of cellular ribonucleoproteins (RNPs). PMID:27367717

  8. Role of adaptor proteins in secretory granule biogenesis and maturation

    Directory of Open Access Journals (Sweden)

    Mathilde L Bonnemaison

    2013-08-01

    Full Text Available In the regulated secretory pathway, secretory granules (SGs store peptide hormones that are released on demand. SGs are formed at the trans-Golgi network (TGN and must undergo a maturation process to become responsive to secretagogues. The production of mature SGs requires concentrating newly synthesized soluble content proteins in granules whose membranes contain the appropriate integral membrane proteins. The mechanisms underlying the sorting of soluble and integral membrane proteins destined for SGs from other proteins are not yet well understood. For soluble proteins, luminal pH and divalent metals can affect aggregation and interaction with surrounding membranes. The trafficking of granule membrane proteins can be controlled by both luminal and cytosolic factors. Cytosolic adaptor proteins, which recognize the cytosolic domains of proteins that span the SG membrane, have been shown to play essential roles in the assembly of functional SGs. Adaptor protein 1A (AP-1A is known to interact with specific motifs in its cargo proteins and with the clathrin heavy chain, contributing to the formation of a clathrin coat. AP-1A is present in patches on immature SG membranes, where it removes cargo and facilitates SG maturation. AP-1A recruitment to membranes can be modulated by PACS-1 (Phosphofurin Acidic Cluster Sorting protein 1, a cytosolic protein which interacts with both AP-1A and cargo that has been phosphorylated by casein kinase II. A cargo/PACS-1/AP-1A complex is necessary to drive the appropriate transport of several cargo proteins within the regulated secretory pathway. The GGA (Golgi-localized, -ear containing, ADP-ribosylation factor binding family of adaptor proteins serve a similar role. We review the functions of AP-1A, PACS-1 and GGAs in facilitating the retrieval of proteins from immature SGs and review examples of cargo proteins whose trafficking within the regulated secretory pathway is governed by adaptor proteins.

  9. Lipofuscin Granules in the Epileptic Human Temporal Neocortex with Age.

    Science.gov (United States)

    Merlo, Suélen; Nakayama, Ana Beatriz S; Brusco, Janaina; Rossi, Marcos A; Carlotti, Carlos G; Moreira, Jorge E

    2015-01-01

    Lipofuscin granules (LGs), the "age pigments", are autofluorescent cell products from lysosomes that diverge in number and size among brain regions. Human temporal cortex from 20- to 55-year-old epileptic subjects were studied with the fat soluble dye Sudan Black, under confocal and electron microscopy. Ultrastructural analysis showed that with age LGs increase in area, but not in number. Proportionally to the LGs area, the electron lucid portion increases and the electron dense reduces over time. The robust increase in lipid components is possibly due to modifications in the neuronal metabolism with age in physiological and pathological conditions.

  10. Stochastic differential equation model for cerebellar granule cell excitability.

    Science.gov (United States)

    Saarinen, Antti; Linne, Marja-Leena; Yli-Harja, Olli

    2008-02-29

    Neurons in the brain express intrinsic dynamic behavior which is known to be stochastic in nature. A crucial question in building models of neuronal excitability is how to be able to mimic the dynamic behavior of the biological counterpart accurately and how to perform simulations in the fastest possible way. The well-established Hodgkin-Huxley formalism has formed to a large extent the basis for building biophysically and anatomically detailed models of neurons. However, the deterministic Hodgkin-Huxley formalism does not take into account the stochastic behavior of voltage-dependent ion channels. Ion channel stochasticity is shown to be important in adjusting the transmembrane voltage dynamics at or close to the threshold of action potential firing, at the very least in small neurons. In order to achieve a better understanding of the dynamic behavior of a neuron, a new modeling and simulation approach based on stochastic differential equations and Brownian motion is developed. The basis of the work is a deterministic one-compartmental multi-conductance model of the cerebellar granule cell. This model includes six different types of voltage-dependent conductances described by Hodgkin-Huxley formalism and simple calcium dynamics. A new model for the granule cell is developed by incorporating stochasticity inherently present in the ion channel function into the gating variables of conductances. With the new stochastic model, the irregular electrophysiological activity of an in vitro granule cell is reproduced accurately, with the same parameter values for which the membrane potential of the original deterministic model exhibits regular behavior. The irregular electrophysiological activity includes experimentally observed random subthreshold oscillations, occasional spontaneous spikes, and clusters of action potentials. As a conclusion, the new stochastic differential equation model of the cerebellar granule cell excitability is found to expand the range of dynamics

  11. Study on quality control method for compound Shanzha Granules

    Institute of Scientific and Technical Information of China (English)

    付延伟; 程艳芹

    2015-01-01

    Objective:To establish the quality standard of Compound Shanzha Granules. Methods:Crataegi Fructus and Cassiae Semen were identified by TLC. The contents of Autrantio- obtusin and Chrysophanol in Cassiae Semen were determined by HPLC. Results:The relevant spots on TLC plates were clear by the blank reference. The contents showed good linearitis in the range of 0.0357~0.3570μg for Autrantio- obtusin and 0.0520~0.5200μg for Chrysophanol.Conclusions:The method are simple, accurate and reproducible.

  12. Simulator for a packing and weighing system of granulated powders.

    Science.gov (United States)

    Couto Rodrigues de Oliveira, Rafael; Garcia, Claudio

    2013-09-01

    The development of a simulator for a packing and weighing system (PWS) of granulated powder is described. It employed system identification to obtain the deterministic part of the model and stochastic processes to reproduce disturbances. It reproduces the fluctuations in carton weight observed in real packing systems. Its final use is to evaluate proposed improvements in the PWS, aiming at reducing overweight and underweight. Its performance is satisfactory, as the oscillations observed in the carton weights, due to powder density variability, are close to reality as well as the monetary losses due to overweight and underweight and the power spectral density graphs of the real and simulated weights.

  13. Proximate analysis for determination of micropores in granulated activated carbon

    Energy Technology Data Exchange (ETDEWEB)

    Berman, Ya. G.; Nikolaev, V.B.; Shepelev, A.N.

    1987-02-01

    A method is discussed for determining the specific micropore volume of granulated activated carbon used for water treatment in Soviet coking plants. Toluene molecules with a diameter of 0.67 nm are sorbed by activated carbon with micropore diameter ranging from 0.7 to 1.4 nm. Therefore, sorptive properties of activated carbon in relation to toluene supply information on micropore volume in carbon. A formula which describes this relation is derived. The method for determining micropore volume on the basis of toluene adsorption was tested using 8 types of activated carbon produced from coal and petroleum. Types of activated carbon characterized by the highest adsorption were selected. 1 ref.

  14. Additives for granulating and removing ash from finely dispersed coal

    Energy Technology Data Exchange (ETDEWEB)

    Ivabutin, K.; Fukuda, T.; Goto, M.; Miva, K.; Murata, T.; Taguti, D.

    1982-07-31

    One to thirty percent of a 0.01 to 10 percent solution of synthetic polymers (SPL) of ethylene and vinylacetate or methacrylate, polybutadiene rubbers, resins based on vinylchloride, low molecular PA and so on in an organic solvent mixed with high boiling point bottoms of coal distillation or that of crude oil and or an inorganic electrolyte (a sulfate or phosphate of an alkaline metal) is added to an aqueous suspension of coal powder in order to utilize the dust particles of the coal and to make low ash granules from them.

  15. Containment atmosphere response to external sprays

    Energy Technology Data Exchange (ETDEWEB)

    Green, J.; Almenas, K. [Univ. of Maryland, College Park, MD (United States)

    1995-09-01

    The application of external sprays to a containment steel shell can be an effective energy removal method and has been proposed in the passive AP-600 design. Reduction of the steel shell temperature in contact with the containment atmosphere enhances both heat and mass transfer driving forces. Large scale experimental data in this area is scarce, therefore the measurements obtained from the E series tests conducted at the German HDR facility deserve special attention. These long term tests simulated various severe accident conditions, including external spraying of the hemispherical steel shell. This investigation focuses upon the integral response of the HDR containment atmosphere during spray periods and upon methods by which lumped parameter system codes, like CONTAIN, model the underlying condensation phenomena. Increases in spray water flowrates above a minimum value were ineffective at improving containment pressure reduction since the limiting resistance for energy transfer lies in the noncondensable-vapor boundary layer at the inner condensing surface. The spray created an unstable condition by cooling the upper layers of a heated atmosphere and thus inducing global natural circulation flows in the facility and subsequently, abrupt changes in lighter-than-air noncondensable (J{sub 2}/He) concentrations. Modeling results using the CONTAIN code are outlined and code limitations are delineated.

  16. Novel microRNA revealed by systematic analysis of the microRNA transcriptome in dentate gyrus granule cells.

    Science.gov (United States)

    Ryan, Brigid; Williams, Joanna M

    2016-09-06

    Post-transcriptional control of gene expression by microRNAs provides an important regulatory system within neurons, allowing co-ordinate and fine-tuned expression of plasticity-related proteins. Indeed, specific microRNAs have been shown to be regulated by synaptic activity in the dentate gyrus, and contribute to the regulated gene expression that underlies the persistence of long-term potentiation (LTP), a model of memory. To fully explore the contribution of microRNAs in synaptic plasticity, it is important to characterize the complete microRNA transcriptome in regions such as the dentate gyrus. Accordingly we used deep sequencing and miRDeep* analysis to search for novel microRNAs expressed in the dentate gyrus granule cell layer. Drawing on combined sequencing and bioinformatics analyses, including hairpin stability and patterns of precursor microRNA processing, we identified nine putative novel microRNAs. We did not find evidence of differential expression of any of these putative microRNAs following LTP at perforant path-granule cell synapses in awake rats (5h post-tetanus; p>0.05). Focusing on novel_miR-1, the most abundant novel miRNA, we showed that this sequence could be amplified from RNA extracted from dentate gyrus granule cells by reverse transcription-quantitative polymerase chain reaction. Further, by computationally predicting mRNA targets of this microRNA, we found that this novel microRNA likely contributes to the regulation of proteins that function at synapses. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  17. Cathodic Potential Dependence of Electrochemical Reduction of SiO2 Granules in Molten CaCl2

    Science.gov (United States)

    Yang, Xiao; Yasuda, Kouji; Nohira, Toshiyuki; Hagiwara, Rika; Homma, Takayuki

    2016-09-01

    As part of an ongoing fundamental study to develop a new process for producing solar-grade silicon, this paper examines the effects of cathodic potential on reduction kinetics, current efficiency, morphology, and purity of Si product during electrolysis of SiO2 granules in molten CaCl2 at 1123 K (850 °C). SiO2 granules were electrolyzed potentiostatically at different cathodic potentials (0.6, 0.8, 1.0, and 1.2 V vs Ca2+/Ca). The reduction kinetics was evaluated based on the growth of the reduced Si layer and the current behavior during electrolysis. The results suggest that a more negative cathodic potential is favorable for faster reduction. Current efficiencies in 60 minutes are greater than 65 pct at all the potentials examined. Si wires with sub-micron diameters are formed, and their morphologies show little dependence on the cathodic potential. The impurities in the Si product can be controlled at low level. The rate-determining step for the electrochemical reduction of SiO2 granules in molten CaCl2 changes with time. At the initial stage of electrolysis, the electron transfer is the rate-determining step. At the later stage, the diffusion of O2- ions is the rate-determining step. The major cause of the decrease in reduction rate with increasing electrolysis time is the potential drop from the current collector to the reaction front due to the increased contact resistance among the reduced Si particles.

  18. [Quantitative structure characteristics and fractal dimension of Chinese medicine granules measured by synchrotron radiation X-ray computed micro tomography].

    Science.gov (United States)

    Lu, Xiao-long; Zheng, Qin; Yin, Xian-zhen; Xiao, Guang-qing; Liao, Zu-hua; Yang, Ming; Zhang, Ji-wen

    2015-06-01

    The shape and structure of granules are controlled by the granulation process, which is one of the main factors to determine the nature of the solid dosage forms. In this article, three kinds of granules of a traditional Chinese medicine for improving appetite and promoting digestion, namely, Jianwei Granules, were prepared using granulation technologies as pendular granulation, high speed stirring granulation, and fluidized bed granulation and the powder properties of them were investigated. Meanwhile, synchrotron radiation X-ray computed micro tomography (SR-µCT) was applied to quantitatively determine the irregular internal structures of the granules. The three-dimensional (3D) structure models were obtained by 3D reconstruction, which were more accurately to characterize the three-dimensional structures of the particles through the quantitative data. The models were also used to quantitatively compare the structural differences of granules prepared by different granulation processes with the same formula, so as to characterize how the production process plays a role in the pharmaceutical behaviors of the granules. To focus on the irregularity of the particle structure, the box counting method was used to calculate the fractal dimensions of the granules. The results showed that the fractal dimension is more sensitive to reflect the minor differences in the structure features than the conventional parameters, and capable to specifically distinct granules in structure. It is proved that the fractal dimension could quantitatively characterize the structural information of irregular granules. It is the first time suggested by our research that the fractal dimension difference (Df,c) between two fractal dimension parameters, namely, the volume matrix fractal dimension and the surface matrix fractal dimension, is a new index to characterize granules with irregular structures and evaluate the effects of production processes on the structures of granules as a new

  19. ExternE transport methodology for external cost evaluation of air pollution

    DEFF Research Database (Denmark)

    Jensen, S. S.; Berkowicz, R.; Brandt, J.

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summaris...... how the methodology has been applied so far in a previous Danish study. Finally, results of a case study are reported. Exposure factors have been calculated for various urban categories in the Greater Copenhagen Area...

  20. ExternE transport methodology for external cost evaluation of air pollution (DK)

    Energy Technology Data Exchange (ETDEWEB)

    Solvang Jensen, S.; Berkowicz, R.; Brandt, J. [National Environmental Research Inst., Dept. of Atmospheric Environment (Denmark); Willumsen, E.; Kristensen, N.B. [COWI (Denmark)

    2004-07-01

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AiGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Inititally, a brief description of the ExternE Transport methodology is given and it is summarised how the methodology has been applied so far in a previous Danish study. Finally, results of a case study are reported. Exposure factors have been calculated for various urban categories in the Greater Copenhagen Area. (au)

  1. External coating of colonic anastomoses

    DEFF Research Database (Denmark)

    Pommergaard, Hans-Christian; Achiam, Michael Patrick; Rosenberg, Jacob

    2012-01-01

    Colon anastomotic leakage remains both a frequent and serious complication in gastrointestinal surgery. External coating of colonic anastomoses has been proposed as a means to lower the rate of this complication. The aim of this review was to evaluate existing studies on external coating of colonic...

  2. Retrofitting Systems for External Walls

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    In this report, 9 different external and internal retrofitting systems are analyzed using numerical calculations. The analysis focuses on the thermal bridge effects in the different systems, and on this basis it is discussed whether internal or external retrofitting has the most advantages...

  3. Nonmixing layers

    Science.gov (United States)

    Gaillard, Pierre; Giovangigli, Vincent; Matuszewski, Lionel

    2016-12-01

    We investigate the impact of nonideal diffusion on the structure of supercritical cryogenic binary mixing layers. This situation is typical of liquid fuel injection in high-pressure rocket engines. Nonideal diffusion has a dramatic impact in the neighborhood of chemical thermodynamic stability limits where the components become quasi-immiscible and ultimately form a nonmixing layer. Numerical simulations are performed for mixing layers of H2 and N2 at a pressure of 100 atm and temperature around 120-150 K near chemical thermodynamic stability limits.

  4. Performance Targets and External Benchmarking

    DEFF Research Database (Denmark)

    Friis, Ivar; Hansen, Allan; Vámosi, Tamás S.

    Research on relative performance measures, transfer pricing, beyond budgeting initiatives, target costing, piece rates systems and value based management has for decades underlined the importance of external benchmarking in performance management. Research conceptualises external benchmarking...... the conditions upon which the market mechanism is performing within organizations. This paper aims to contribute to research by providing more insight to the conditions for the use of external benchmarking as an element in performance management in organizations. Our study explores a particular type of external...... towards the conditions for the use of the external benchmarks we provide more insights to some of the issues and challenges that are related to using this mechanism for performance management and advance competitiveness in organizations....

  5. Improved tabletability after a polymorphic transition of delta-mannitol during twin screw granulation.

    Science.gov (United States)

    Vanhoorne, V; Bekaert, B; Peeters, E; De Beer, T; Remon, J-P; Vervaet, C

    2016-06-15

    In most formulations processed via continuous twin screw granulation microcrystalline cellulose (MCC) and/or lactose are used as excipients, but mannitol is also a preferred excipient for wet granulation and tableting due to its non-hygroscopicity and inertness. Therefore, the aim of the current study was to investigate the influence of process parameters on critical quality attributes of granules (moisture content, solid state, morphology, size distribution, specific surface area, friability, flowability and hygroscopicity) and tablets (tensile strength and friability) after twin screw granulation of δ-mannitol. The δ-polymorph was selected since a moisture-induced transformation to β-mannitol was observed during batch wet granulation, which exhibited a unique morphology with a large surface area and improved tabletability. A full factorial experimental design was performed, varying screw speed (400-900rpm), granulation temperature (25-40°C), number of kneading elements (6 or 12) and liquid-to-solid (L/S) ratio, on the granulation unit of a ConsiGma™-25 line (a continuous powder-to-tablet manufacturing system). After tray drying the granules were milled and tableted. The results showed that the polymorphic transition from δ- to β-mannitol also occurred during twin screw granulation, although the residence time and L/S ratios were much lower in continuous twin screw granulation compared to batch processing. However, the polymorphic transition was not complete in all experiments and depended on the L/S ratio, screw speed and number of kneading elements. Nevertheless all granules exhibited the unique morphology linked to the polymorphic transition and had a superior tabletability compared to granules produced with β-mannitol as starting material. This was attributed to enhanced plastic deformation of the granules manufactured using δ-mannitol as starting material. In addition, it was concluded that mannitol was granulated via a different mechanism than

  6. Respiratory Syncytial Virus Induces Host RNA Stress Granules To Facilitate Viral Replication▿

    Science.gov (United States)

    Lindquist, Michael E.; Lifland, Aaron W.; Utley, Thomas J.; Santangelo, Philip J.; Crowe, James E.

    2010-01-01

    Mammalian cell cytoplasmic RNA stress granules are induced during various conditions of stress and are strongly associated with regulation of host mRNA translation. Several viruses induce stress granules during the course of infection, but the exact function of these structures during virus replication is not well understood. In this study, we showed that respiratory syncytial virus (RSV) induced host stress granules in epithelial cells during the course of infection. We also showed that stress granules are distinct from cytoplasmic viral inclusion bodies and that the RNA binding protein HuR, normally found in stress granules, also localized to viral inclusion bodies during infection. Interestingly, we demonstrated that infected cells containing stress granules also contained more RSV protein than infected cells that did not form inclusion bodies. To address the role of stress granule formation in RSV infection, we generated a stable epithelial cell line with reduced expression of the Ras-GAP SH3 domain-binding protein (G3BP) that displayed an inhibited stress granule response. Surprisingly, RSV replication was impaired in these cells compared to its replication in cells with intact G3BP expression. In contrast, knockdown of HuR by RNA interference did not affect stress granule formation or RSV replication. Finally, using RNA probes specific for RSV genomic RNA, we found that viral RNA predominantly localized to viral inclusion bodies but a small percentage also interacted with stress granules during infection. These results suggest that RSV induces a host stress granule response and preferentially replicates in host cells that have committed to a stress response. PMID:20844027

  7. A preliminary pharmacognostical and pharmaceutical assay of Yastimadhu granules

    Directory of Open Access Journals (Sweden)

    Srihari Sheshagiri

    2012-01-01

    Full Text Available Aim: Yastimadhu (Glycyrrhizha glabra Linn. of Fabaceae family is one of the most commonly used herb in various Ayurvedic preparations with its vivid actions on various systems. It is also used as a flavouring agent and taste corrigent in pharmaceutical as well as confectionery industries. In a study conducted to evaluate the role of Yastimadhu in enhancing intellect and memory of school going children, the drug was used in the form of granules so ask to mask the issue of palatability. Pharmacognostical and physico-chemical properties were explored to assess the genuine nature of the raw drug in this new formulation after it underwent the pharmaceutical procedure. Materials and Methods: The present study provides the details of preparation of granules and methods employed in pharmacognostical and physic-chemical qualities. Results: The results obtained revealed that the genuine properties of raw drug did not change even after it underwent the pharmaceutical procedure into a new form which was easily palatable. Conclusion: As the drug possesses multiple actions and qualities, the new form would be of potential benefit to all age group of patients with issue of palatability. This study can also be used as a reference for further quality-control researches.

  8. Enteric coating of granules containing the probiotic Lactobacillus acidophilus

    Directory of Open Access Journals (Sweden)

    Pyar Hassan

    2014-06-01

    Full Text Available In the present study, a capsule formulation composed of enteric coated granules of Lactobacillus acidophilus ATCC 4962 was developed using Eudragit L30D-55 as enteric polymer. Optimization of the capsule formulation was achieved with a maximum viable cell count after 2 h of incubation in acid medium and disintegration time of 1 h in buffer pH 6.8. The amount of Eudragit L30D-55 in the capsules correlated with gastric juice resistance. The best protective qualities against artificial gastric juice were observed when capsules were prepared from granules composed of L. acidophilus, corn starch, lactose monohydrate, polyvinylpyrrolidone and coated with 12.5 % (m/V of Eudragit L30D-55. Capsule formulation of L. acidophilus in edible broth medium suspension serves as a cheap alternative to the expensive freeze-drying procedure for preparing L. acidophilus. In addition, the enteric coating using Eudragit L30D-55 could protect probiotics from the acidic gastric environment and enhance the bioactivity of probiotics along with replacement of pathogenic microbes in human intestine

  9. Mechanisms of ethanol-induced death of cerebellar granule cells.

    Science.gov (United States)

    Luo, Jia

    2012-03-01

    Maternal ethanol exposure during pregnancy may cause fetal alcohol spectrum disorders (FASD). FASD is the leading cause of mental retardation. The most deleterious effect of fetal alcohol exposure is inducing neuroapoptosis in the developing brain. Ethanol-induced loss of neurons in the central nervous system underlies many of the behavioral deficits observed in FASD. The cerebellum is one of the brain areas that are most susceptible to ethanol during development. Ethanol exposure causes a loss of both cerebellar Purkinje cells and granule cells. This review focuses on the toxic effect of ethanol on cerebellar granule cells (CGC) and the underlying mechanisms. Both in vitro and in vivo studies indicate that ethanol induces apoptotic death of CGC. The vulnerability of CGC to ethanol-induced death diminishes over time as neurons mature. Several mechanisms for ethanol-induced apoptosis of CGC have been suggested. These include inhibition of N-methyl-D-aspartate receptors, interference with signaling by neurotrophic factors, induction of oxidative stress, modulation of retinoid acid signaling, disturbance of potassium channel currents, thiamine deficiency, and disruption of translational regulation. Cultures of CGC provide an excellent system to investigate cellular/molecular mechanisms of ethanol-induced neurodegeneration and to evaluate interventional strategies. This review will also discuss the approaches leading to neuroprotection against ethanol-induced neuroapoptosis.

  10. A high temperature granulation process for ecological ash recirculation

    Energy Technology Data Exchange (ETDEWEB)

    Sundqvist, Thomas

    1999-07-01

    This thesis is a summary of three papers dealing with new technologies for facilitating ecological biomass ash recirculation back to forest and farm lands. The present outtake of biomass for paper and energy production may be incompatible with a sustainable forestry. The cycle of nutrients contained in the biomass extracted must be closed by ash recirculation in an environmental compatible way. This implies stabilization of the loose ashes/rest-products to a product with low heavy metal contents, controlled leaching properties and a high spreadability. In the present work, two different techniques were evaluated for the possibilities to separate heavy metals from the nutrient elements by utilizing high process temperatures to vaporize the unwanted metals from the condensed bulk materials. The results indicated that direct in-situ separation in fluidized bed combustion systems is possible, but requires too high process temperatures to be practically attractive. On the other hand, the new proposed high temperature treatment method for granulated raw materials was found to significantly separate As, Cd and Pb, with separation efficiencies exceeding 90 % at optimal operating conditions. In addition, the results indicated that the treatment method could be used to significantly delay and control the leaching characteristics, as well as the content of products of incomplete combustion of the produced granules.

  11. Modifying the properties of finely ground limestone by tumbling granulation

    Science.gov (United States)

    Macho, Oliver; Eckert, Maroš; Tomášová, Barbora; Peciar, Peter; Ščasný, Martin; Fekete, Roman; Peciar, Marián

    2016-06-01

    Calcium carbonate in the form of finely ground limestone is a material that has found its application in a wide range of industries, in the chemical, rubber, agricultural, and paper industries, is used for desulfurization of boilers and other. In civil engineering, ground limestone is used for the production of building materials, plaster and mortar mixtures, as a filler in concrete mixtures, in road construction, and as an essential component of mastic asphalt. This paper deals with examining the modification of the properties of finely ground limestone by the tumbling agglomeration method. It has been shown that the components of concrete with a round grain have a positive effect on the pumping of concrete in comparison with an elongated grain or the rough surface of crushed stone. The experiments will be carried out on a granulation plate using a variety of granulation liquid. The agglomerates and their properties were compared with untreated finely ground limestone, with a focus on detecting changes in compressibility, density and particle size. The output of this paper is a description and graphical representation of the changes in the properties of ground limestone before and after the agglomeration process.

  12. Tribology of swollen starch granule suspensions from maize and potato.

    Science.gov (United States)

    Zhang, Bin; Selway, Nichola; Shelat, Kinnari J; Dhital, Sushil; Stokes, Jason R; Gidley, Michael J

    2017-01-02

    The tribological properties of suspensions of cooked swollen starch granules are characterised for systems based on maize starch and potato starch. These systems are known as granule 'ghosts' due to the release (and removal) of polymer from their structure during cooking. Maize starch ghosts are less swollen than potato starch ghosts, resulting in a higher packing concentration and greater mechanical stability. In a soft-tribological contact, maize ghost suspensions reduce friction compared to the solvent (water), generate bell-shaped tribological profiles characteristic of particle entrainment and show a marked concentration dependence, whereas potato ghost suspensions exhibit lubrication behaviour similar to water. Microscopy analysis of the samples following tribological testing suggests that this is due to the rapid break-up of potato ghosts under the shear and rolling conditions within the tribological contact. A reduction in the small deformation moduli (associated with a weak gel structure) is also observed when the potato ghost suspensions are subjected to steady shear using parallel plate rheometry; both microscopy and particle size analysis show that this is accompanied by the partial shear-induced breakage of ghost particles. This interplay between particle microstructure and the resultant rheological and lubrication dynamics of starch ghost suspensions contributes to an enhanced mechanistic understanding of textural and other functional properties of cooked starches in food and other applications.

  13. Modifying the properties of finely ground limestone by tumbling granulation

    Directory of Open Access Journals (Sweden)

    Macho Oliver

    2016-06-01

    Full Text Available Calcium carbonate in the form of finely ground limestone is a material that has found its application in a wide range of industries, in the chemical, rubber, agricultural, and paper industries, is used for desulfurization of boilers and other. In civil engineering, ground limestone is used for the production of building materials, plaster and mortar mixtures, as a filler in concrete mixtures, in road construction, and as an essential component of mastic asphalt. This paper deals with examining the modification of the properties of finely ground limestone by the tumbling agglomeration method. It has been shown that the components of concrete with a round grain have a positive effect on the pumping of concrete in comparison with an elongated grain or the rough surface of crushed stone. The experiments will be carried out on a granulation plate using a variety of granulation liquid. The agglomerates and their properties were compared with untreated finely ground limestone, with a focus on detecting changes in compressibility, density and particle size. The output of this paper is a description and graphical representation of the changes in the properties of ground limestone before and after the agglomeration process.

  14. Preparation of porcelain tile granulates by more environmentally sustainable processes

    Directory of Open Access Journals (Sweden)

    García-Ten, J.

    2012-04-01

    Full Text Available This study examines the feasibility of manufacturing glazed porcelain tiles with a more environmentally friendly manufacturing process, by reducing water and thermal energy consumption. The process studied in this paper is dry milling in a pendulum mill, with subsequent granulation (in order to obtain a press powder with similar flowability to that of spraydried powders. The different morphology of the new granulate with respect to the standard spray-dried granulate modifies the microstructure of the green compacts and thus, their behaviour and fired tile properties. In order to obtain porcelain tiles with the required properties (water absorption, mechanical strength,… changes have been made in the raw materials mixture and in the processing variables. Finally, porcelain tiles measuring 50x50 cm have been manufactured at industrial scale with the new granulate using a conventional firing cycle, obtaining quality levels identical to those provided by the spray-dried granulate. These results open the possibility of preparing porcelain tile body compositions through a manufacturing process alternative to the standard one, more environmentally friendly and with lower costs.

    En el presente trabajo se ha estudiado la viabilidad de fabricar gres porcelánico esmaltado utilizando un sistema de preparación de la composición del soporte más respetuoso con el medio ambiente, lo que implica una reducción importante de los consumos de agua y de energía térmica. El proceso que se estudia en el presente trabajo es el consistente en la molienda vía seca en molino pendular y en la posterior granulación (para obtener un polvo de prensas con fluidez similar a la de los polvos atomizados. La distinta morfología de los nuevos gránulos obtenidos respecto al polvo atomizado actual, modifica la microestuctura en crudo de las piezas y, con ello, el comportamiento y propiedades finales de las baldosas obtenidas. Por ello, ha sido necesario

  15. Physical model of granule adhesion to the belt-electrodes of a tribo-aero-electrostatic separator

    Science.gov (United States)

    Li, Jia; Dascalescu, Lucian; Miloudi, Mohamed; Bilici, Mihai; Xu, Zhenming

    2013-03-01

    Recent studies have demonstrated the effectiveness of tribo-aero-electrostatic separation technologies, which consist in the selective sorting of mixed granular insulating materials in a fluidized bed affected by an electric field orthogonally oriented to the direction of the fluidization air. The aim of the present paper is to put the theoretical bases for the optimization of this process, i. e. maximize the total mass of the granules collected at the two electrodes that generate the electric field. The various forces that drive a granule of given mass and electric charge through the electric field and make it stick to an electrode are expressed as functions of the several input variables and parameters of the process, such as the applied high-voltage or the surface roughness, the size and the position of the electrodes. The concepts of "critical electrostatic field" and "virtual climbing distance" are introduced. The prediction of the theoretical model are confirmed by the results of three sets of experiments, carried out on samples of a granular mixture consisting of 50% Acrylonitrile Butadiene Styrene (ABS) and 50% High Impact Polystyrene (HIPS), originating from the recycling of waste electric and electronic equipment. Higher separation efficiency was obtained when the electric field in the active zone was intensified by the use of an additional electrode connected to the ground and when the collecting electrodes were covered by a thin insulating layer.

  16. 复方参曲颗粒剂的制备和质量标准研究%Study On Preparation and Quality Standard of Compound Shenqu Granules

    Institute of Scientific and Technical Information of China (English)

    熊平; 王岩; 蒋灵芝

    2011-01-01

    [目的]研究复方参曲颗粒剂的制备和质量标准.[方法]以丹酚酸B的含量、流动性和引湿性等为指标,考察复方参曲颗粒刑的提取、纯化、浓缩、干燥、成型等工艺.以处方半数药材为研究对象,依据中国药典进行薄层鉴别:以丹酚酸B的含量为指标,通过对成品的提取方法、提取时间、溶剂用量3个方面进行选择,建立成品最佳提取方法;方法学考察包括线性、精密度、专属性、稳定性、准确度等内容.采用高效液相色谱(HPLC)法测定丹酚酸B的含量,以十八烷基硅烷键合硅胶为填充剂,甲醇-乙腈-体积分数2%甲酸水(体积比为28:10:62)为流动相,检测波长为286 nm,按外标法定量.[结果]将小试最佳成型工艺进行3批放大中试生产,结果证明产品工艺稳定,符合质量标准规定;成品提取用体积分数75%甲醇50 mL,加热回流30 min所得的丹酚酸B含量最高,各项实验结果均符合相应参数的要求,说明采用的方法满足相应的检测要求.样品含量测定方法准确度、回收率均符合中国药典Ⅰ部(2005版).该方法灵敏度高、专属性强.[结论]本实验筛选出了复方参曲颗粒剂最佳成型工艺.建立了以人参皂苷Rg1、橙皮苷、哈巴俄苷为对照品的薄层鉴别方法,为复方参曲颗粒剂的定性研究提供了依据;建立了以丹酚酸B为含量测定指标的HPLC法;建立了成品总皂苷含量测定方法.%Objective To study the preparation and quality standard of Compound Shenqu Granules (SG).Methods With the content, fluidity and hygroscopicity of salvianolic acid B as evaluation indexes, the extraction,purification , concentration, drying and forming process of SG was studied. According to Chinese Pharmacopoeia,half medicinal materials of SG were identified by thin-layer chromatography (TLC). With salvianolic acid B content as observation index, the optimal extraction process of SG was screened through investigating

  17. 复方参曲颗粒剂的质量标准研究%Study On Quality Standards of Compound ShenQu Granules

    Institute of Scientific and Technical Information of China (English)

    熊平; 王岩; 蒋灵芝

    2011-01-01

    [Objective]To study quality standards of compound ShenQu Granules. [Methods]According to Chinese Pharmacopoeia,the half medicinal material of prescription was discerned by thin-layer chromatography(TLC). By the content of Salvianolic Acid B as index, The optimum pre-processing methods was built through inspecting different extraction method,extraction time and solvent amount. The HPLC method was used to determine the content of Salvianolic Acid B. The contents were measured in Phenomenex Luna C18 column,methanol-acetonitrile-2% water-formic acid(28: 10: 62)as the mobile phase,and using 286 nm detection wave length and area-external standard method. The methodology was inspected that included linear relationship, precision,fidelity,stability and accuracy of the test. [Results]It indicates that the content of Salvianolic Acid B is highest by the method of 50mL 75 % ethanol hot refluxing for 30 minutes. The accuracy and recovery percent of the determination of sample content conform to Chinese Pharmacopoeia(2005). The identification method of TLC has a good sensitivity and specificity. [Conclusion]TLC analysis was set up by contrast of ginsenoside rg 1 ,hesperidin and Harpagoside, HPLC analysis was also established by Salvianolic Acid B as contents determination index. That provided a basis for the qualitative study of Compound ShenQu Granules.%[目的]建立复方参曲颗粒剂质量标准.[方法]以处方半数药材为研究对象,依据中国药典,进行薄层鉴别;以丹酚酸B的含量为指标,通过对成品的提取方法、提取时间、溶剂用量3个因素进行考察,建立成品最佳前处理方法;采用高效液相色谱法HPLC法测定丹酚酸B的含量.以十八烷基硅烷键合硅胶为填充剂;以甲醇-乙腈-2%甲酸水(28:10:62)为流动相,检测波长286nm;按外标法定量.并进行方法学考察.[结果]用75%甲醇50mL,加热回流30min所得的丹酚酸B含量最高,薄层鉴别方法灵敏度高、专属性强.[结论]建

  18. External costs related to power production technologies. ExternE national implementation for Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Schleisner, L.; Sieverts Nielsen, P.

    1997-12-01

    The objective of the ExternE National Implementation project has been to establish a comprehensive and comparable set of data on externalities of power generation for all EU member states and Norway. The tasks include the application of the ExternE methodology to the most important fuel cycles for each country as well as to update the already existing results; to aggregate these site- and technology-specific results to more general figures. The current report covers the results of the national implementation for Denmark. Three different fuel cycles have been chosen as case studies. These are fuel cycles for an offshore wind farm and a wind farm on land, a decentralised CHP plant based on natural gas and a decentralised CHP plant based on biogas. The report covers all the details of the application of the methodology to these fuel cycles aggregation to a national level. (au) EU-JOULE 3. 59 tabs., 25 ills., 61 refs.

  19. The use of rheology to elucidate the granulation mechanisms of a miscible and immiscible system during continuous twin-screw melt granulation.

    Science.gov (United States)

    Monteyne, Tinne; Heeze, Liza; Mortier, Séverine Thérèse F C; Oldörp, Klaus; Nopens, Ingmar; Remon, Jean-Paul; Vervaet, Chris; De Beer, Thomas

    2016-08-20

    Twin-screw hot melt granulation (TS HMG) is a valuable, but still unexplored alternative to granulate temperature and moisture sensitive drugs in a continuous way. Recently, the material behavior of an immiscible drug-binder blend during TS HMG was unraveled by using a rheometer and differential scanning calorimetry (DSC). Additionally, vibrational spectroscopic techniques proved the link between TS HMG and rheology since equal interactions at molecular level did occur in both processes. This allowed to use a rheometer to gain knowledge of the material behavior during hot melt processing of an immiscible drug-binder blend. However, miscibility of a drug-binder formulation and drug-binder interactions appear to influence the rheological properties and, hence conceivably also the granulation mechanism. The aim of this research was to examine if the TS HMG process of a miscible formulation system is comparable with the mechanism of an immiscible system and to evaluate whether rheology still serves as a useful tool to understand and optimize the hot melt granulation (HMG) process. The executed research (thermal analysis, rheological parameters and spectroscopic data) demonstrated the occurrence of a high and broad tan(δ) curve without a loss peak during the rheological temperature ramp which implies a higher material deformability without movement of the softened single polymer chains. Spectroscopic analysis revealed drug-polymer interactions which constrain the polymer to flow independently. As a result, the binder distribution step, which generally follows the immersion step, was hindered. This insight assisted the understanding of the granule properties. Inhomogeneous granules were produced due to large initial nuclei or adhesion of multiple smaller nuclei. Consequently, a higher granulation temperature was required in order to get the binder more homogeneously distributed within the granules. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Starch granule size strongly determines starch noodle processing and nnodle quality.

    NARCIS (Netherlands)

    Chen Zenghong,; Schols, H.A.; Voragen, A.G.J.

    2003-01-01

    Chemical compositions, physical properties, and suitability for starch noodle making of different granule size fractions from potato and sweet potato starches were studied. The ash content, amylose content, phosphorus content, gel firmness, and freeze-thaw stability of small-size granule fractions