Environmental external effects for wind power and coal

Energy Technology Data Exchange (ETDEWEB)

Schleisner, L.; Meyer, H.J.; Morthorst, P.E. [Risoe National Lab., Roskilde (Denmark). Systems Analysis Dept.

1995-12-31

This article summarises some of the results achieved in a project carried out in Denmark with the purpose to assess the environmental damages and the external costs in the production of energy. The project has especially handled renewable energy versus energy based on fossil fuels. The project has been a collaboration between the Technical University of Denmark and Riso National Laboratory. The research institutions have considered different energy production technologies in the project. The energy production technologies that have been considered by Risoe National Laboratory and will be reported and compared in this article are the following: (1) Wind power, (2) A coal-fired condensing plant. In the project the environmental damages are thus compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized. The following result applies in general to the applied technologies. Only the environmental externalities have been assessed in the project. Social and economical externalities, e.g. related to changes in employment or depletion of resources, are not included in the project. The cost concept is based on marginal damage cost, in principle taking as starting point the level of pollution that exists today. The methodology, which has been used in order to find and monetize the environmental externalities, consists of the different processes like Identification, quantification, Dose-response and Valuation

Environmental external effects for wind power and coal

International Nuclear Information System (INIS)

Schleisner, L.; Meyer, H.J.; Morthorst, P.E.

1995-01-01

This article summarises some of the results achieved in a project carried out in Denmark with the purpose to assess the environmental damages and the external costs in the production of energy. The project has especially handled renewable energy versus energy based on fossil fuels. The project has been a collaboration between the Technical University of Denmark and Riso National Laboratory. The research institutions have considered different energy production technologies in the project. The energy production technologies that have been considered by Risoe National Laboratory and will be reported and compared in this article are the following: (1) Wind power, (2) A coal-fired condensing plant. In the project the environmental damages are thus compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized. The following result applies in general to the applied technologies. Only the environmental externalities have been assessed in the project. Social and economical externalities, e.g. related to changes in employment or depletion of resources, are not included in the project. The cost concept is based on marginal damage cost, in principle taking as starting point the level of pollution that exists today. The methodology, which has been used in order to find and monetize the environmental externalities, consists of the different processes like Identification, quantification, Dose-response and Valuation

Prestress Force Identification for Externally Prestressed Concrete Beam Based on Frequency Equation and Measured Frequencies

Directory of Open Access Journals (Sweden)

Luning Shi

2014-01-01

Full Text Available A prestress force identification method for externally prestressed concrete uniform beam based on the frequency equation and the measured frequencies is developed. For the purpose of the prestress force identification accuracy, we first look for the appropriate method to solve the free vibration equation of externally prestressed concrete beam and then combine the measured frequencies with frequency equation to identify the prestress force. To obtain the exact solution of the free vibration equation of multispan externally prestressed concrete beam, an analytical model of externally prestressed concrete beam is set up based on the Bernoulli-Euler beam theory and the function relation between prestress variation and vibration displacement is built. The multispan externally prestressed concrete beam is taken as the multiple single-span beams which must meet the bending moment and rotation angle boundary conditions, the free vibration equation is solved using sublevel simultaneous method and the semi-analytical solution of the free vibration equation which considered the influence of prestress on section rigidity and beam length is obtained. Taking simply supported concrete beam and two-span concrete beam with external tendons as examples, frequency function curves are obtained with the measured frequencies into it and the prestress force can be identified using the abscissa of the crosspoint of frequency functions. Identification value of the prestress force is in good agreement with the test results. The method can accurately identify prestress force of externally prestressed concrete beam and trace the trend of effective prestress force.

Parental knowledge is an environmental influence on adolescent externalizing.

Science.gov (United States)

Marceau, Kristine; Narusyte, Jurgita; Lichtenstein, Paul; Ganiban, Jody M; Spotts, Erica L; Reiss, David; Neiderhiser, Jenae M

2015-02-01

There is evidence both that parental monitoring is an environmental influence serving to diminish adolescent externalizing problems and that this association may be driven by adolescents' characteristics via genetic and/or environmental mechanisms, such that adolescents with fewer problems tell their parents more, and therefore appear to be better monitored. Without information on how parents' and children's genes and environments influence correlated parent and child behaviors, it is impossible to clarify the mechanisms underlying this association. The present study used the Extended Children of Twins model to distinguish types of gene-environment correlation and direct environmental effects underlying associations between parental knowledge and adolescent (age 11-22 years) externalizing behavior with a Swedish sample of 909 twin parents and their adolescent offspring and a US-based sample of 405 White adolescent siblings and their parents. Results suggest that more parental knowledge is associated with less adolescent externalizing via a direct environmental influence independent of any genetic influences. There was no evidence of a child-driven explanation of the association between parental knowledge and adolescent externalizing problems. In this sample of adolescents, parental knowledge exerted an environmental influence on adolescent externalizing after accounting for genetic influences of parents and adolescents. Because the association between parenting and child development originates in the parent, treatment for adolescent externalizing must not only include parents but should also focus on altering their parental style. Thus, findings suggest that teaching parents better knowledge-related monitoring strategies is likely to help reduce externalizing problems in adolescents. © 2014 The Authors. Journal of Child Psychology and Psychiatry. © 2014 Association for Child and Adolescent Mental Health.

French regulations for countering external violent forces affecting nuclear power stations

International Nuclear Information System (INIS)

Dupraz, B.

1986-01-01

This article describes the general principles underlying nuclear safety regulations to counter external violent forces to which plants can be exposed. It then examines the statutory directives concerning external violences connected with human activities or originating from natural phenomena. 3 refs [fr

Anharmonic 1D actuator model including electrostatic and Casimir forces with fractional damping perturbed by an external force

Science.gov (United States)

Mansoori Kermani, Maryam; Dehestani, Maryam

2018-06-01

We modeled a one-dimensional actuator including the Casimir and electrostatic forces perturbed by an external force with fractional damping. The movable electrode was assumed to oscillate by an anharmonic elastic force originated from Murrell-Mottram or Lippincott potential. The nonlinear equations have been solved via the Adomian decomposition method. The behavior of the displacement of the electrode from equilibrium position, its velocity and acceleration were described versus time. Also, the changes of the displacement have been investigated according to the frequency of the external force and the voltage of the electrostatic force. The convergence of the Adomian method and the effect of the orders of expansion on the displacement versus time, frequency, and voltage were discussed. The pull-in parameter was obtained and compared with the other models in the literature. This parameter was described versus the equilibrium position and anharmonicity constant.

Anharmonic 1D actuator model including electrostatic and Casimir forces with fractional damping perturbed by an external force

Science.gov (United States)

Mansoori Kermani, Maryam; Dehestani, Maryam

2018-03-01

We modeled a one-dimensional actuator including the Casimir and electrostatic forces perturbed by an external force with fractional damping. The movable electrode was assumed to oscillate by an anharmonic elastic force originated from Murrell-Mottram or Lippincott potential. The nonlinear equations have been solved via the Adomian decomposition method. The behavior of the displacement of the electrode from equilibrium position, its velocity and acceleration were described versus time. Also, the changes of the displacement have been investigated according to the frequency of the external force and the voltage of the electrostatic force. The convergence of the Adomian method and the effect of the orders of expansion on the displacement versus time, frequency, and voltage were discussed. The pull-in parameter was obtained and compared with the other models in the literature. This parameter was described versus the equilibrium position and anharmonicity constant.

External force/velocity control for an autonomous rehabilitation robot

Science.gov (United States)

Saekow, Peerayuth; Neranon, Paramin; Smithmaitrie, Pruittikorn

2018-01-01

Stroke is a primary cause of death and the leading cause of permanent disability in adults. There are many stroke survivors, who live with a variety of levels of disability and always need rehabilitation activities on daily basis. Several studies have reported that usage of rehabilitation robotic devices shows the better improvement outcomes in upper-limb stroke patients than the conventional therapy-nurses or therapists actively help patients with exercise-based rehabilitation. This research focuses on the development of an autonomous robotic trainer designed to guide a stroke patient through an upper-limb rehabilitation task. The robotic device was designed and developed to automate the reaching exercise as mentioned. The designed robotic system is made up of a four-wheel omni-directional mobile robot, an ATI Gamma multi-axis force/torque sensor used to measure contact force and a microcontroller real-time operating system. Proportional plus Integral control was adapted to control the overall performance and stability of the autonomous assistive robot. External force control was successfully implemented to establish the behavioral control strategy for the robot force and velocity control scheme. In summary, the experimental results indicated satisfactorily stable performance of the robot force and velocity control can be considered acceptable. The gain tuning for proportional integral (PI) velocity control algorithms was suitably estimated using the Ziegler-Nichols method in which the optimized proportional and integral gains are 0.45 and 0.11, respectively. Additionally, the PI external force control gains were experimentally tuned using the trial and error method based on a set of experiments which allow a human participant moves the robot along the constrained circular path whilst attempting to minimize the radial force. The performance was analyzed based on the root mean square error (E_RMS) of the radial forces, in which the lower the variation in radial

Effect of static deformation and external forces on the oscillations of levitated droplets

Science.gov (United States)

Suryanarayana, P. V. R.; Bayazitoglu, Y.

1991-01-01

The oscillations of an aspherical droplet subjected to different external forces are considered. For an arbitrary shape deformation, it is shown that the frequency spectrum splits into (2l - 1) peaks for a mode l oscillation, and the splitting of the frequency spectrum is calculated for mode 2, 3, and 4 oscillations. The deformation is then treated as a consequence of a general external force, and the frequency split is obtained in terms of the external force parameters. Droplets levitated by acoustic, electromagnetic, and combined acoustic-electromagnetic forces are considered in particular, and it is shown that the effects of asphericity adequately explain the splitting of the frequency spectrum observed commonly in experiments. The interpretation of spectra with regard to accurate surface tension measurement using the oscillations of levitated droplets is discussed, and the results applied to some previous experimental results. It is shown that the accuracy of surface tension measurements can improve if the asphericity caused by the levitating force, and the resulting frequency split, are taken into account.

External Force Estimation for Teleoperation Based on Proprioceptive Sensors

Directory of Open Access Journals (Sweden)

Enrique del Sol

2014-03-01

Full Text Available This paper establishes an approach to external force estimation for telerobotic control in radioactive environments by the use of an identified manipulator model and pressure sensors, without employing a force/torque sensor. The advantages of - and need for - force feedback have been well-established in the field of telerobotics, where electrical and back-drivable manipulators have traditionally been used. This research proposes a methodology employing hydraulic robots for telerobotics tasks based on a model identification scheme. Comparative results of a force sensor and the proposed approach using a hydraulic telemanipulator are presented under different conditions. This approach not only presents a cost effective solution but also a methodology for force estimation in radioactive environments, where the dose rates limit the use of electronic devices such as sensing equipment.

Environmental management strategy: four forces analysis.

Science.gov (United States)

Doyle, Martin W; Von Windheim, Jesko

2015-01-01

We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

Environmental Management Strategy: Four Forces Analysis

Science.gov (United States)

Doyle, Martin W.; Von Windheim, Jesko

2015-01-01

We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

Noise-sustained and controlled synchronization of stirred excitable media by external forcing

International Nuclear Information System (INIS)

Zhou Changsong; Kurths, Juergen

2005-01-01

Most of the previous studies on constructive effects of noise in spatially extended systems have focused on static media, e.g., of the reaction-diffusion type. Because many active chemical or biological processes occur in a fluid environment with mixing, we investigate here the interplay among noise, excitability, mixing and external forcing in excitable media advected by a chaotic flow, in a two-dimensional FitzHugh-Nagumo model described by a set of reaction-advection-diffusion equations. In the absence of external forcing, noise may generate sustained coherent oscillations of the media in a range of noise intensities and stirring rates. We find that these noise-sustained oscillations can be synchronized by external periodic signals much smaller than the threshold. Analysis of the locking regions in the parameter space of the signal period, stirring rate and noise intensity reveals that the mechanism underlying the synchronization behaviour is a matching between the time scales of the forcing signal and the noise-sustained oscillations. The results demonstrate that, in the presence of a suitable level of noise, the stirred excitable media act as self-sustained oscillatory systems and become much easier to be entrained by weak external forcing. Our results may be verified in experiments and are useful to understand the synchronization of population dynamics of oceanic ecological systems by annual cycles

Noise-sustained and controlled synchronization of stirred excitable media by external forcing

Energy Technology Data Exchange (ETDEWEB)

Zhou Changsong; Kurths, Juergen [Institute of Physics, University of Potsdam, PF 601553, 14415 Potsdam (Germany)

2005-01-01

Most of the previous studies on constructive effects of noise in spatially extended systems have focused on static media, e.g., of the reaction-diffusion type. Because many active chemical or biological processes occur in a fluid environment with mixing, we investigate here the interplay among noise, excitability, mixing and external forcing in excitable media advected by a chaotic flow, in a two-dimensional FitzHugh-Nagumo model described by a set of reaction-advection-diffusion equations. In the absence of external forcing, noise may generate sustained coherent oscillations of the media in a range of noise intensities and stirring rates. We find that these noise-sustained oscillations can be synchronized by external periodic signals much smaller than the threshold. Analysis of the locking regions in the parameter space of the signal period, stirring rate and noise intensity reveals that the mechanism underlying the synchronization behaviour is a matching between the time scales of the forcing signal and the noise-sustained oscillations. The results demonstrate that, in the presence of a suitable level of noise, the stirred excitable media act as self-sustained oscillatory systems and become much easier to be entrained by weak external forcing. Our results may be verified in experiments and are useful to understand the synchronization of population dynamics of oceanic ecological systems by annual cycles.

Effect of externally applied periodic force on ion acoustic waves in superthermal plasmas

Science.gov (United States)

Chowdhury, Snigdha; Mandi, Laxmikanta; Chatterjee, Prasanta

2018-04-01

Ion acoustic solitary waves in superthermal plasmas are investigated in the presence of trapped electrons. The reductive perturbation technique is employed to obtain a forced Korteweg-de Vries-like Schamel equation. An analytical solution is obtained in the presence of externally applied force. The effect of the external applied periodic force is also observed. The effect of the spectral index (κ), the strength ( f 0 ) , and the frequency ( ω ) on the amplitude and width of the solitary wave is obtained. The result may be useful in laboratory plasma as well as space environments.

Environmental externality and inequality in China: Current Status and future choices

International Nuclear Information System (INIS)

Zhao, Xiaoli; Zhang, Sufang; Fan, Chunyang

2014-01-01

Along with China's rapid economic growth, the environmental externality in the country is getting more and more serious. China's environmental externality is accompanied by environmental inequality, which presents two characteristics: First, the health loss caused by environmental externality is concentrated in the elderly and children. We take Beijing as an empirical analysis to conclude that children (0–4 years old) are the largest group suffered from respiratory disease; while the seniors are the largest group suffered from cardiovascular disease. Second, China's environmental inequality is mainly caused by the transfer of industries from urban to rural areas/suburbs. The villagers in poor rural areas are the biggest victims. China's environmental inequality is reflected particularly by the phenomenon of “cancer villages” which has existed ever since the end of 1970s. Finally, policy recommendations are provided for reducing China's environmental externality and inequality. - The seniors and children are the biggest victims of air pollution, and the transfer of industries from urban to rural areas led to occurrence of “cancer villages” in China

Political Measures for Strategic Environmental Policy with External Effects

Energy Technology Data Exchange (ETDEWEB)

Ohyama, A. [Graduate School of Economics, Kyoto University, Kyoto (Japan); Tsujimura, M. [Faculty of Economics, Ryukoku University, Otsu (Japan)

2006-10-15

This paper investigates an environmental policy designed to reduce the emission of pollutants under uncertainty, with the agent problem as an optimal stopping problem. We first analyze the two cases in which there are one agent and two competing agents by following Ohyama and Tsujimura (2005). When we consider a model of strategic agents, we need to analyze the external economic effect that is peculiar to an agent's environmental policy implementation. Then, to improve and resolve these external effects, we examine three alternative political measures, comprising an environmental subsidy, an environmental tax and an emission trading system. The results of the analysis indicate that the environmental subsidy and environmental tax promote environmental policy. However, they do not create an incentive to be the leader. On the other hand, an emissions trading system not only promotes environmental policy but also creates an incentive for leadership.

Political Measures for Strategic Environmental Policy with External Effects

International Nuclear Information System (INIS)

Ohyama, A.; Tsujimura, M.

2006-01-01

This paper investigates an environmental policy designed to reduce the emission of pollutants under uncertainty, with the agent problem as an optimal stopping problem. We first analyze the two cases in which there are one agent and two competing agents by following Ohyama and Tsujimura (2005). When we consider a model of strategic agents, we need to analyze the external economic effect that is peculiar to an agent's environmental policy implementation. Then, to improve and resolve these external effects, we examine three alternative political measures, comprising an environmental subsidy, an environmental tax and an emission trading system. The results of the analysis indicate that the environmental subsidy and environmental tax promote environmental policy. However, they do not create an incentive to be the leader. On the other hand, an emissions trading system not only promotes environmental policy but also creates an incentive for leadership

A piecewise-integration method for simulating the influence of external forcing on climate

Institute of Scientific and Technical Information of China (English)

Zhifu Zhang; Chongjian Qiu; Chenghai Wang

2008-01-01

Climate drift occurs in most general circulation models (GCMs) as a result of incomplete physical and numerical representation of the complex climate system,which may cause large uncertainty in sensitivity experiments evaluating climate response to changes in external forcing.To solve this problem,we propose a piecewise-integration method to reduce the systematic error in climate sensitivity studies.The observations are firstly assimilated into a numerical model by using the dynamic relaxation technique to relax to the current state of atmosphere,and then the assimilated fields are continuously used to reinitialize the simulation to reduce the error of climate simulation.When the numerical model is integrated with changed external forcing,the results can be split into two parts,background and perturbation fields,and the background is the state before the external forcing is changed.The piecewise-integration method is used to continuously reinitialize the model with the assimilated field,instead of the background.Therefore,the simulation error of the model with the external forcing can be reduced.In this way,the accuracy of climate sensitivity experiments is greatly improved.Tests with a simple low-order spectral model show that this approach can significantly reduce the uncertainty of climate sensitivity experiments.

Relative contributions of external forcing factors to circulation and hydrographic properties in a micro-tidal bay

Science.gov (United States)

Yoon, Seokjin; Kasai, Akihide

2017-11-01

The dominant external forcing factors influencing estuarine circulation differ among coastal environments. A three-dimensional regional circulation model was developed to estimate external influence indices and relative contributions of external forcing factors such as external oceanic forcing, surface heat flux, wind stress, and river discharge to circulation and hydrographic properties in Tango Bay, Japan. Model results show that in Tango Bay, where the Tsushima Warm Current passes offshore of the bay, under conditions of strong seasonal winds and river discharge, the water temperature and salinity are strongly influenced by surface heat flux and river discharge in the surface layer, respectively, while in the middle and bottom layers both are mainly controlled by open boundary conditions. The estuarine circulation is comparably influenced by all external forcing factors, the strong current, surface heat flux, wind stress, and river discharge. However, the influence degree of each forcing factor varies with temporal variations in external forcing factors as: the influence of open boundary conditions is higher in spring and early summer when the stronger current passes offshore of the bay, that of surface heat flux reflects the absolute value of surface heat flux, that of wind stress is higher in late fall and winter due to strong seasonal winds, and that of river discharge is higher in early spring due to snow-melting and summer and early fall due to flood events.

Stability of aerosol droplets in Bessel beam optical traps under constant and pulsed external forces

International Nuclear Information System (INIS)

David, Grégory; Esat, Kıvanç; Hartweg, Sebastian; Cremer, Johannes; Chasovskikh, Egor; Signorell, Ruth

2015-01-01

We report on the dynamics of aerosol droplets in optical traps under the influence of additional constant and pulsed external forces. Experimental results are compared with simulations of the three-dimensional droplet dynamics for two types of optical traps, the counter-propagating Bessel beam (CPBB) trap and the quadruple Bessel beam (QBB) trap. Under the influence of a constant gas flow (constant external force), the QBB trap is found to be more stable compared with the CPBB trap. By contrast, under pulsed laser excitation with laser pulse durations of nanoseconds (pulsed external force), the type of trap is of minor importance for the droplet stability. It typically needs pulsed laser forces that are several orders of magnitude higher than the optical forces to induce escape of the droplet from the trap. If the droplet strongly absorbs the pulsed laser light, these escape forces can be strongly reduced. The lower stability of absorbing droplets is a result of secondary thermal processes that cause droplet escape

Stability of aerosol droplets in Bessel beam optical traps under constant and pulsed external forces

Energy Technology Data Exchange (ETDEWEB)

David, Grégory; Esat, Kıvanç; Hartweg, Sebastian; Cremer, Johannes; Chasovskikh, Egor; Signorell, Ruth, E-mail: rsignorell@ethz.ch [Laboratory of Physical Chemistry, ETH Zürich, Vladimir-Prelog-Weg 2, CH-8093 Zürich (Switzerland)

2015-04-21

We report on the dynamics of aerosol droplets in optical traps under the influence of additional constant and pulsed external forces. Experimental results are compared with simulations of the three-dimensional droplet dynamics for two types of optical traps, the counter-propagating Bessel beam (CPBB) trap and the quadruple Bessel beam (QBB) trap. Under the influence of a constant gas flow (constant external force), the QBB trap is found to be more stable compared with the CPBB trap. By contrast, under pulsed laser excitation with laser pulse durations of nanoseconds (pulsed external force), the type of trap is of minor importance for the droplet stability. It typically needs pulsed laser forces that are several orders of magnitude higher than the optical forces to induce escape of the droplet from the trap. If the droplet strongly absorbs the pulsed laser light, these escape forces can be strongly reduced. The lower stability of absorbing droplets is a result of secondary thermal processes that cause droplet escape.

Stability of aerosol droplets in Bessel beam optical traps under constant and pulsed external forces.

Science.gov (United States)

David, Grégory; Esat, Kıvanç; Hartweg, Sebastian; Cremer, Johannes; Chasovskikh, Egor; Signorell, Ruth

2015-04-21

We report on the dynamics of aerosol droplets in optical traps under the influence of additional constant and pulsed external forces. Experimental results are compared with simulations of the three-dimensional droplet dynamics for two types of optical traps, the counter-propagating Bessel beam (CPBB) trap and the quadruple Bessel beam (QBB) trap. Under the influence of a constant gas flow (constant external force), the QBB trap is found to be more stable compared with the CPBB trap. By contrast, under pulsed laser excitation with laser pulse durations of nanoseconds (pulsed external force), the type of trap is of minor importance for the droplet stability. It typically needs pulsed laser forces that are several orders of magnitude higher than the optical forces to induce escape of the droplet from the trap. If the droplet strongly absorbs the pulsed laser light, these escape forces can be strongly reduced. The lower stability of absorbing droplets is a result of secondary thermal processes that cause droplet escape.

Stability of aerosol droplets in Bessel beam optical traps under constant and pulsed external forces

Science.gov (United States)

David, Grégory; Esat, Kıvanç; Hartweg, Sebastian; Cremer, Johannes; Chasovskikh, Egor; Signorell, Ruth

2015-04-01

We report on the dynamics of aerosol droplets in optical traps under the influence of additional constant and pulsed external forces. Experimental results are compared with simulations of the three-dimensional droplet dynamics for two types of optical traps, the counter-propagating Bessel beam (CPBB) trap and the quadruple Bessel beam (QBB) trap. Under the influence of a constant gas flow (constant external force), the QBB trap is found to be more stable compared with the CPBB trap. By contrast, under pulsed laser excitation with laser pulse durations of nanoseconds (pulsed external force), the type of trap is of minor importance for the droplet stability. It typically needs pulsed laser forces that are several orders of magnitude higher than the optical forces to induce escape of the droplet from the trap. If the droplet strongly absorbs the pulsed laser light, these escape forces can be strongly reduced. The lower stability of absorbing droplets is a result of secondary thermal processes that cause droplet escape.

Electricity generation and environmental externalities: Case studies, September 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-28

Electricity constitutes a critical input in sustaining the Nation`s economic growth and development and the well-being of its inhabitants. However, there are byproducts of electricity production that have an undesirable effect on the environment. Most of these are emissions introduced by the combustion of fossil fuels, which accounts for nearly 70 percent of the total electricity generated in the United States. The environmental impacts (or damages) caused by these emissions are labeled environmental ``externalities.`` Included in the generic term ``externality`` are benefits or costs resulting as an unintended byproduct of an economic activity that accrue to someone other than the parties involved in the activity. This report provides an overview of the economic foundation of externalities, the Federal and State regulatory approaches, and case studies of the impacts of the externality policies adopted by three States.

Assessment of environmental external effects in the production of energy

DEFF Research Database (Denmark)

Schleisner, L.; Meyer, H.J.; Morthorst, P.E.

1995-01-01

A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project the environm......A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project...... the environmental damages for the energy production technologies are compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized....

The valuation of environmental externalities in energy conservation planning

International Nuclear Information System (INIS)

Chernick, P.L.; Caverhill, E.J.

1990-01-01

The determination of the full societal costs of energy usage must incorporate estimates of the environmental effects, or externalities, of energy production and delivery. An externality is any cost or benefit that is not reflected in the price paid by a utility or its customers for energy produced or consumed. The potential variety and scope of externality analyses are discussed. Four methods of externality valuation are briefly discussed to highlight the uses, strengths and pitfalls of each method. The use of pollutants' relative potency, polling of experts, direct estimation of costs, and implied valuation, are compared. The authors preferred method of valuation for near-term energy supply decisions, implied valuation, is discussed in detail. The distinguishing feature of the implied valuation technique is its use of the cost of control, rather than the direct cost of emissions. Only the most expensive required control measure is relevant to valuation of the external effects. The difficulties in applying implied valuation, such as the definition of the margin, the multiple effects of pollutants and the imperfect nature of the regulatory system, are also considered. The effect of environmental externalities on the benefits of conservation are summarized

Evidence for external forcing of the Atlantic Multidecadal Oscillation since termination of the Little Ice Age.

Science.gov (United States)

Knudsen, Mads Faurschou; Jacobsen, Bo Holm; Seidenkrantz, Marit-Solveig; Olsen, Jesper

2014-02-25

The Atlantic Multidecadal Oscillation (AMO) represents a significant driver of Northern Hemisphere climate, but the forcing mechanisms pacing the AMO remain poorly understood. Here we use the available proxy records to investigate the influence of solar and volcanic forcing on the AMO over the last ~450 years. The evidence suggests that external forcing played a dominant role in pacing the AMO after termination of the Little Ice Age (LIA; ca. 1400-1800), with an instantaneous impact on mid-latitude sea-surface temperatures that spread across the North Atlantic over the ensuing ~5 years. In contrast, the role of external forcing was more ambiguous during the LIA. Our study further suggests that the Atlantic Meridional Overturning Circulation is important for linking external forcing with North Atlantic sea-surface temperatures, a conjecture that reconciles two opposing theories concerning the origin of the AMO.

Propagation of the state change induced by external forces in local interactions

Science.gov (United States)

Lu, Jianjun; Tokinaga, Shozo

2016-10-01

This paper analyses the propagation of the state changes of agents that are induced by external forces applied to a plane. In addition, we propose two models for the behavior of the agents placed on a lattice plane, both of which are affected by local interactions. We first assume that agents are allowed to move to another site to maximise their satisfaction. Second, we utilise a model in which the agents choose activities on each site. The results show that the migration (activity) patterns of agents in both models achieve stability without any external forces. However, when we apply an impulsive external force to the state of the agents, we then observe the propagation of the changes in the agents' states. Using simulation studies, we show the conditions for the propagation of the state changes of the agents. We also show the propagation of the state changes of the agents allocated in scale-free networks and discuss the estimation of the agents' decisions in real state changes. Finally, we discuss the estimation of the agents' decisions in real state temporal changes using economic and social data from Japan and the United States.

Study of deformation of droplet in external force field by using liquid-gas model of lattice-gas

International Nuclear Information System (INIS)

Ebihara, Ken-ichi; Watanabe, Tadashi

2000-10-01

The deformation of the droplet by the external force which is assumed to be gravity is studied by using the liquid-gas model of lattice-gas. Two types of liquid-gas models, one is the minimal model and the other is the maximal model, which are distinguished from each other by the added long-range interactions are used for the simulation of the droplet deformation. The difference of the droplet deformation between the maximal model and the minimal model was observed. While the droplet of the minimal model elongates in the direction of the external force, the droplet of the maximal model elongates in the perpendicular direction to the external force. Therefore the droplet deformation in the external force field of the maximal model is more similar to the droplet deformation which is observed in experiments than that of the minimal model. (author)

Power generation choice in the presence of environmental externalities

Energy Technology Data Exchange (ETDEWEB)

Sundqvist, Thomas

2002-08-01

This dissertation consists of an introductory part and six self-contained papers, all related to the issue of power generation choice in the presence of environmental externalities. Paper 1 provides a critical survey of a large number of electricity externality studies carried out during the last decades, and discusses a number of conceptual, policy-related and, in some cases, unresolved questions in the economic valuation of electricity externalities. These include: (a) the definition of externalities; (b) the choices of scope, relevant parameter input assumptions, and methodology; (c) the role of 'green' consumer demand in replacing external cost assessments; and (d) the behavioral assumptions and ethical principles underlying external cost valuation. Paper 2 focuses on explaining the variability of results among the external cost studies carried out so far by providing an econometric analysis of a large sample of externality studies. Most importantly, the paper concludes that an important explanation for the reported disparities can be attributed to the overall methodological choice employed. Paper 3 explores some of the ethical limits of environmental valuation, and analyzes what the implications are of these limits for the social choice between different power sources. The main thesis of the paper is that the scope of electricity externalities where non-market valuation can be applied from an ethical point of view is likely to be narrower than commonly assumed. Papers 4 and 5 use the choice experiment method to estimate how the environmental impacts arising from hydroelectric production are perceived and valued by Swedish houseowning households and non-residential consumers. The basis of the choice exercise is taken in the criteria set up by the Swedish Society for Nature Conservation under which existing hydropower in Sweden can be labeled as 'green' electricity. Data are gathered using mail-out surveys to 1000 households and 845 private

Final Environmental Assessment for the First Air Force Air Operations Center, First Air Force Headquarters/Air Force Forces Center, and Highway 98 Overpass at Tyndall Air Force Base, Florida

Science.gov (United States)

2004-01-01

no comments regarding the Draft Environmental Assessment for the First Air Force Operations Center, First Air Force Headquarters/Air Force Forces...COUNCIL ] No Comment BAY - BAY COUNTY No Final Comments Received ENVIRONMENTAL POLICY UNIT - OFFICE OF POLICY AND BUDGET, ENVIRONMENTAL POLICY UNIT NO ...CONSERVATION COMMISSION [ NO COMMENT BY BRIAN BARNETT ON 4/12/04. [STATE - FLORIDA DEPARTMENT OF STATE [ No Comment [TRANSPORTATION - FLORIDA DEPARTMENT

External Periodic Force Control of a Single-Degree-of-Freedom Vibroimpact System

Directory of Open Access Journals (Sweden)

Jingyue Wang

2013-01-01

Full Text Available A single-degree-of-freedom mechanical model of vibro-impact system is established. Bifurcation and chaos in the system are revealed with the time history diagram, phase trajectory map, and Poincaré map. According to the bifurcation and chaos of the actual vibro-impact system, the paper puts forward external periodic force control strategy. The method of controlling chaos by external periodic force feedback controller is developed to guide chaotic motions towards regular motions. The stability of the control system is also analyzed especially by theory. By selecting appropriate feedback coefficients, the unstable periodic orbits of the original chaotic orbit can be stabilized to the stable periodic orbits. The effectiveness of this control method is verified by numerical simulation.

Environmental externalities: Applying the concept to Asian coal-based power generation. [Includes external environmental and societal costs and methods of evaluating them

Energy Technology Data Exchange (ETDEWEB)

Szpunar, C.B.; Gillette, J.L.

1993-03-01

This report examines the concept of environmental externality. It discusses various factors -- the atmospheric transformations, relationship of point-source emissions to ambient air quality, dose-response relationships, applicable cause-and-effect principles, and risk and valuation research -- that are considered by a number of state utilities when they apply the environmental externality concept to energy resource planning. It describes a methodology developed by Argonne National Laboratory for general use in resource planning, in combination with traditional methods that consider the cost of electricity production. Finally, it shows how the methodology can be applied in Indonesia, Thailand, and Taiwan to potential coal-fired power plant projects that will make use of clean coal technologies.

Euler-Poincaré Reduction of Externally Forced Rigid Body Motion

DEFF Research Database (Denmark)

Wisniewski, Rafal; Kulczycki, P.

2004-01-01

If a mechanical system experiences symmetry, the Lagrangian becomes invariant under a certain group action. This property leads to substantial simplification of the description of movement. The standpoint in this article is a mechanical system affected by an external force of a control action....... Assuming that the system possesses symmetry and the configuration manifold corresponds to a Lie group, the Euler-Poincaré reduction breaks up the motion into separate equations of dynamics and kinematics. This becomes of particular interest for modelling, estimation and control of mechanical systems......-known Euler-Poincaré reduction to a rigid body motion with forcing....

Pipeline integrity management: integration of geotechnical and mechanical assessment to control potential risks due to external forces

Energy Technology Data Exchange (ETDEWEB)

Malpartida Moya, John E.; Sota, Giancarlo Massucco de la; Seri, Walter [Compania Operadora de Gas del Amazonas, Lima (Peru)

2009-07-01

Every pipeline integrity management system evaluates and controls various threats. On pipelines which have particular characteristics as it is the case of the Andean pipelines and pipelines crossing jungles, one of the main threats are the external forces. Even, this threat causes a greater number of failures than other threats like corrosion or the third part damage. Facing this situation, the pipeline integrity management system of TgP has achieved an important development in the use and suitable handling of the information provided by diverse techniques of pipeline mechanical inspection and geotechnical inspection of the right-of-way (ROW). This document presents our methodology, which interrelate information of the in-line inspection, information of geotechnical inspections of the ROW, instrumentation (Strain Gages), topographic monitoring, among others. All this information is supported in a Geographic Information System (GIS) which allows us to integrate the information. By means of the pipeline integrity management system we control potential risks due to external forces, we have been able to act before events become critical, with no occurrence of failures. This system allows us simultaneously to optimize efforts and preserve the mechanical integrity of our pipelines, not producing neither personal nor environmental nor economical affectation. (author)

Internal phase transition induced by external forces in Finsler geometric model for membranes

Science.gov (United States)

Koibuchi, Hiroshi; Shobukhov, Andrey

2016-10-01

In this paper, we numerically study an anisotropic shape transformation of membranes under external forces for two-dimensional triangulated surfaces on the basis of Finsler geometry. The Finsler metric is defined by using a vector field, which is the tangential component of a three-dimensional unit vector σ corresponding to the tilt or some external macromolecules on the surface of disk topology. The sigma model Hamiltonian is assumed for the tangential component of σ with the interaction coefficient λ. For large (small) λ, the surface becomes oblong (collapsed) at relatively small bending rigidity. For the intermediate λ, the surface becomes planar. Conversely, fixing the surface with the boundary of area A or with the two-point boundaries of distance L, we find that the variable σ changes from random to aligned state with increasing of A or L for the intermediate region of λ. This implies that an internal phase transition for σ is triggered not only by the thermal fluctuations, but also by external mechanical forces. We also find that the frame (string) tension shows the expected scaling behavior with respect to A/N (L/N) at the intermediate region of A (L) where the σ configuration changes between the disordered and ordered phases. Moreover, we find that the string tension γ at sufficiently large λ is considerably smaller than that at small λ. This phenomenon resembles the so-called soft-elasticity in the liquid crystal elastomer, which is deformed by small external tensile forces.

Assessing the Environmental Conditions of Higher Education: In a Theoretical Approach Using Porter’s Five Forces Model

Directory of Open Access Journals (Sweden)

Oya TAMTEKİN AYDIN

2017-08-01

Full Text Available Increased demand for higher education and the change and competition it has brought have been a subject for many studies. In Porter’s five forces model, forces termed as the threat of new entrants, threat of substitute products, bargaining power of suppliers, bargaining power of customers, and established rivals between the companies are used to understand the threats and opportunities posed by the industry’s environmental circumstances. The five forces model has been extensively used as an analytical tool to determine the intensity of rivalry and levels of profitability. Thus, managers can develop strategies and discover ways to defend their companies against competitive forces. Although there have been numerous studies conducted with this model for various sectors, the studies implementing this theory to higher education are very scarce due to uncertainty about whether higher education could be regarded as an industry together with its profitability and rivalry components. Specifically, in Turkey, with the idea of considering higher education to be an industry being disputable compared with western countries and even regarded as unmannerly and disloyal to academia explains the lack of studies on this subject. In this study, within the scope of the related literature, the five forces model will be discussed in conjunction with higher education. Subsequently, the factors and evaluations that are shown within this scope will be associated with the external environmental conditions of Turkish higher education. Since there is a lack of well-written sources and sufficient data, the association with Turkish higher education will not be deeply detailed. To perceive the threats and opportunities to higher education from external environmental conditions, an overall approach will be achieved. The theoretical substructure introduced by this study will bring a different viewpoint to politicians, university directors and academicians, along with being

Trunk muscle activation and associated lumbar spine joint shear forces under different levels of external forward force applied to the trunk

NARCIS (Netherlands)

Kingma, I.; Staudenmann, D.; van Dieen, J.H.

2007-01-01

High anterior intervertebral shear loads could cause low back injuries and therefore the neuromuscular system may actively counteract these forces. This study investigated whether, under constant moment loading relative to L3L4, an increased externally applied forward force on the trunk results in a

The Relationship Between the Genetic and Environmental Influences on Common Externalizing Psychopathology and Mental Wellbeing

Science.gov (United States)

Kendler, Kenneth S.; Myers, John M.; Keyes, Corey L. M.

2012-01-01

To determine the relationship between the genetic and environmental risk factors for externalizing psychopathology and mental wellbeing, we examined detailed measures of emotional, social and psychological wellbeing, and a history of alcohol-related problems and smoking behavior in the last year in 1,386 individual twins from same-sex pairs from the MIDUS national US sample assessed in 1995. Cholesky decomposition analyses were performed with the Mx program. The best fit model contained one highly heritable common externalizing psychopathology factor for both substance use/abuse measures, and one strongly heritable common factor for the three wellbeing measures. Genetic and environmental risk factors for externalizing psychopathology were both negatively associated with levels of mental wellbeing and accounted for, respectively, 7% and 21% of its genetic and environmental influences. Adding internalizing psychopathology assessed in the last year to the model, genetic risk factors unique for externalizing psychopathology were now positively related to levels of mental wellbeing, although accounting for only 5% of the genetic variance. Environmental risk factors unique to externalizing psychopathology continued to be negatively associated with mental wellbeing, accounting for 26% of the environmental variance. When both internalizing psychopathology and externalizing psychopathology are associated with mental wellbeing, the strongest risk factors for low mental wellbeing are genetic factors that impact on both internalizing psychopathology and externalizing psychopathology, and environmental factors unique to externalizing psychopathology. In this model, genetic risk factors for externalizing psychopathology predict, albeit weakly, higher levels of mental wellbeing. PMID:22506307

Environmental Externalities of Geological Carbon Sequestration Effects on Energy Scenarios

International Nuclear Information System (INIS)

Smekens, K.; Van der Zwaan, B.

2004-03-01

Geological carbon sequestration seems one of the promising options to address, in the near term, the global problem of climate change, since carbon sequestration technologies are in principle available today and their costs are expected to be affordable. Whereas extensive technological and economic feasibility studies rightly point out the large potential of this 'clean fossil fuel' option, relatively little attention has been paid so far to the detrimental environmental externalities that the sequestering of CO2 underground could entail. This paper assesses what the relevance might be of including these external effects in long-term energy planning and scenario analyses. Our main conclusion is that, while these effects are generally likely to be relatively small, carbon sequestration externalities do matter and influence the nature of future world energy supply and consumption. More importantly, since geological carbon storage (depending on the method employed) may in some cases have substantial external impacts, in terms of both environmental damage and health risks, it is recommended that extensive studies are performed to quantify these effects. This article addresses three main questions: (1) What may energy supply look like if one accounts for large-scale CO2 sequestration in the construction of long-term energy and climate change scenarios; (2) Suppose one hypothesizes a quantification of the external environmental costs of CO2 sequestration, how do then these supposed costs affect the evolution of the energy system during the 21st century; (3) Does it matter for these scenarios whether carbon sequestration damage costs are charged directly to consumers or, instead, to electricity producers?

Streamwise-body-force-model for rapid simulation combining internal and external flow fields

Directory of Open Access Journals (Sweden)

Cui Rong

2016-10-01

Full Text Available A streamwise-body-force-model (SBFM is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could be simplified as body forces along the streamline. These body forces which are functions of local parameters could be added as source terms in Navier-Stokes equations to replace solid boundary conditions of blades and hubs. The validation of SBFM with uniform inlet and distortion inlet of compressors shows that pressure performance characteristics agree well with experimental data. A three-dimensional simulation of the integration configuration, via a blended wing body aircraft with a distributed propulsion system using the SBFM, has been completed. Lift coefficient and drag coefficient agree well with wind tunnel test results. Results show that to reach the goal of rapid integrated simulation combining internal and external flow fields, the computational fluid dynamics method based on SBFM is reasonable.

External force back-projective composition and globally deformable optimization for 3-D coronary artery reconstruction

International Nuclear Information System (INIS)

Yang, Jian; Cong, Weijian; Fan, Jingfan; Liu, Yue; Wang, Yongtian; Chen, Yang

2014-01-01

The clinical value of the 3D reconstruction of a coronary artery is important for the diagnosis and intervention of cardiovascular diseases. This work proposes a method based on a deformable model for reconstructing coronary arteries from two monoplane angiographic images acquired from different angles. First, an external force back-projective composition model is developed to determine the external force, for which the force distributions in different views are back-projected to the 3D space and composited in the same coordinate system based on the perspective projection principle of x-ray imaging. The elasticity and bending forces are composited as an internal force to maintain the smoothness of the deformable curve. Second, the deformable curve evolves rapidly toward the true vascular centerlines in 3D space and angiographic images under the combination of internal and external forces. Third, densely matched correspondence among vessel centerlines is constructed using a curve alignment method. The bundle adjustment method is then utilized for the global optimization of the projection parameters and the 3D structures. The proposed method is validated on phantom data and routine angiographic images with consideration for space and re-projection image errors. Experimental results demonstrate the effectiveness and robustness of the proposed method for the reconstruction of coronary arteries from two monoplane angiographic images. The proposed method can achieve a mean space error of 0.564 mm and a mean re-projection error of 0.349 mm. (paper)

Externality costs by resource. E. Renewable generation resources

International Nuclear Information System (INIS)

Anon.

1991-01-01

This chapter describes the environmental impacts associated with operation of renewable energy technologies. Renewable energy technologies currently supply 8% of US total energy usage and that figure is certain to grow. The rate of growth will depend heavily on the availability of research and development funds, and could reach 28% of US energy demands by 2030. Renewable generation resources include hydroelectric development, solar energy technologies, wind conversion facilities, and biomass fueled generation. A task force of personnel from five national laboratories recently concluded that renewable energy technologies generally have lower environmental impacts than do fossil fuel energy systems. The task force also stated that a comprehensive and comparative analysis of environmental impacts is needed and would strengthen the National Energy Strategy. This chapter summarizes some of the available literature on costing the environmental externalities associated with hydro, solar, wind, and biomass facilities. The less prevalent renewable energy technologies, including geothermal and ocean energy technologies, were not researched. The cost ranges identified are summarized in Table 1. The Table does not include a value for hydroelectric energy. The one study which attempted to value hydroelectric externalities was highly site-specific and has been criticized for having vastly overstated the value of the externalities

Monsoonal Responses to External Forcings over the Past Millennium: A Model Study (Invited)

Science.gov (United States)

Liu, J.; Wang, B.

2009-12-01

The climate variations related to Global Monsoon (GM) and East Asian summer monsoon (EASM) rainfall over the past 1000 years were investigated by analysis of a pair of millennium simulations with the coupled climate model named ECHO-G. The free run was generated using fixed external (annual cycle) forcing, while the forced run was obtained using time-varying solar irradiance variability, greenhouse gases (CO2 and CH4) concentration and estimated radiative effect of volcanic aerosols. The model results indicate that the centennial-millennial variation of the GM and EASM is essentially a forced response to the external radiative forcings (insolation, volcanic aerosols, and greenhouse gases). The GM strength responds more directly to the effective solar forcing (insolation plus radiative effect of the volcanoes) when compared to responses of the global mean surface temperature on centennial timescale. The simulated GM precipitation in the forced run exhibits a significant quasi-bi-centennial oscillation. Weak GM precipitation was simulated during the Little Ice Age (1450-1850) with three weakest periods concurring with the Spörer, Maunder, and Dalton Minimum of solar activity. Conversely, strong GM was simulated during the model Medieval Warm Period (ca. 1030-1240). Before the industrial period, the natural variation in effective solar forcing reinforces the thermal contrasts both between the ocean and continent and between the northern and southern hemispheres, resulting in millennium-scale variation and the quasi-bi-centennial oscillation of the GM. The prominent upward trend in the GM precipitation occurring in the last century and the remarkably strengthening of the global monsoon in the period of 1961-1990 appear unprecedented and owed possibly in part to the increase of atmospheric carbon dioxide concentration. The EASM has the largest meridional extent (5oN-55oN) among all the regional monsoons on globe. Thus, the EASM provides an unique opportunity for

Complex dynamics in Josephson system with two external forcing terms

International Nuclear Information System (INIS)

Yang Jianping; Feng Wei; Jing Zhujun

2006-01-01

Josephson system with two external forcing terms is investigated. By applying Melnikov method, we prove that criterion of existence of chaos under periodic perturbation. By second-order averaging method and Melnikov method, we obtain the criterion of existence of chaos in averaged system under quasi-periodic perturbation for ω 2 =ω 1 +εν, and cannot prove the criterion of existence of chaos in averaged system under quasi-periodic perturbation for ω 2 =nω 1 +εν (n>=2 and n-bar N), where ν is not rational to ω 1 . We also study the effects of the parameters of system on dynamical behaviors by using numerical simulation. The numerical simulations, including bifurcation diagram of fixed points, bifurcation diagram of system in three- and two-dimensional space, homoclinic and heteroclinic bifurcation surface, Maximum Lyapunov exponent, phase portraits, Poincare map, are also plotted to illustrate theoretical analysis, and to expose the complex dynamical behaviors, including the period-n (n=1,2,5,7) orbits in different chaotic regions, cascades of period-doubling bifurcation from period-1, 2 and 5 orbits, reverse period-doubling bifurcation, onset of chaos which occurs more than once for two given external frequencies and chaos suddenly converting to periodic orbits, transient chaos with complex periodic windows and crisis, reverse period-5 bubble, non-attracting chaotic set and nice attracting chaotic set. In particular, we observe that the system can leave chaotic region to periodic motion by adjusting damping α, amplitude f 1 and frequency ω 2 of external forcing which can be considered as a control strategy

Transport and diffusion on crystalline surfaces under external forces

International Nuclear Information System (INIS)

Lindenberg, Katja; Lacasta, A M; Sancho, J M; Romero, A H

2005-01-01

We present a numerical study of classical particles obeying a Langevin equation and moving on a solid crystalline surface under an external force that may either be constant or modulated by periodic oscillations. We focus on the particle drift velocity and diffusion. The roles of friction and equilibrium thermal fluctuations are studied for two nonlinear dynamical regimes corresponding to low and to high but finite friction. We identify a number of resonances and antiresonances, and provide phenomenological interpretations of the observed behaviour

A survey report for the biped locomotion model under external force

International Nuclear Information System (INIS)

Kato, Ichiro; Takanishi, Atsuo; Kume, Etsuo.

1993-10-01

A mechanical design study of biped locomotion robots is being performed at JAERI within the scope of the Human Acts Simulation Program (HASP). The design study at JAERI is of an arbitrarily mobile robot for inspection of nuclear facilities. We have developed the simulation software which has capability of obtaining several types of stable motions for straight walking in terms of design tools. In addition, we are studying more complex walking patterns such as turning. However, in order to realize the robustness of walking, it is also necessary for the robot to have a capability of walking under external force as a disturbance which is caused by touching an object and so on. A survey has been performed for collecting useful information from already existing biped locomotion robots. This is a survey report for the biped locomotion model under external force: the WL-12RIII/IV designed and developed at Waseda University. This report includes the machine model, control system, control method and results of walking experiments. (author)

Assessment of environmental external effects in power generation

International Nuclear Information System (INIS)

Meyer, H.; Morthorst, P.E.; Schleisner, L.; Meyer, N.I.; Nielsen, P.S.; Nielsen, V.

1996-12-01

This report summarises some of the results achieved in a project carried out in Denmark in 1994 concerning externalities. The main objective was to identify, quantify and - if possible - monetize the external effects in the production of energy, especially in relation to renewable technologies. The report compares environmental externalities in the production of energy using renewable and non-renewable energy sources, respectively. The comparison is demonstrated on two specific case studies. The first case is the production of electricity based on wind power plants compared to the production of electricity based on a coal-fired conventional plant. In the second case heat/power generation by means of a combined heat and power plant based on biomass-generated gas is compared to that of a combined heat and power plant fuelled by natural gas. In the report the individual externalities from the different ways of producing energy are identified, the stress caused by the effect is assessed, and finally the monetary value of the damage is estimated. The method is applied to the local as well as the regional and global externalities. (au) 8 tabs., 7 ills., 4 refs

Assessment of environmental external effects in power generation

Energy Technology Data Exchange (ETDEWEB)

Meyer, H.; Morthorst, P.E.; Schleisner, L. [Risoe National Lab. (Denmark); Meyer, N.I.; Nielsen, P.S.; Nielsen, V. [The Technical Univ. of Denmark (Denmark)

1996-12-01

This report summarises some of the results achieved in a project carried out in Denmark in 1994 concerning externalities. The main objective was to identify, quantify and - if possible - monetize the external effects in the production of energy, especially in relation to renewable technologies. The report compares environmental externalities in the production of energy using renewable and non-renewable energy sources, respectively. The comparison is demonstrated on two specific case studies. The first case is the production of electricity based on wind power plants compared to the production of electricity based on a coal-fired conventional plant. In the second case heat/power generation by means of a combined heat and power plant based on biomass-generated gas is compared to that of a combined heat and power plant fuelled by natural gas. In the report the individual externalities from the different ways of producing energy are identified, the stress caused by the effect is assessed, and finally the monetary value of the damage is estimated. The method is applied to the local as well as the regional and global externalities. (au) 8 tabs., 7 ills., 4 refs.

Symmetries, conservation laws, and time reversibility for Hamiltonian systems with external forces

NARCIS (Netherlands)

Schaft, A.J. van der

1983-01-01

A system theoretic framework is given for the description of Hamiltonian systems with external forces and partial observations of the state. It is shown how symmetries and conservation laws can be defined within this framework. A generalization of Noether's theorem is obtained. Finally a precise

Influence of AC external magnetic field on guidance force relaxation between HTS bulk and NdFeB guideway

Energy Technology Data Exchange (ETDEWEB)

Zhang Longcai [Applied Superconductivity Laboratory, P.O. Box 152, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China)], E-mail: zhlcai2000@163.com; Wang Suyu; Wang Jiasu; Zheng Jun [Applied Superconductivity Laboratory, P.O. Box 152, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China)

2007-12-01

Superconducting maglev vehicle is one of the most promising applications of HTS bulks. In such a system, the HTS bulks are always exposed to time-varying external magnetic field, which is generated by the inhomogeneous surface magnetic field of the NdFeB guideway. So it is required to study whether the guidance force of the bulks is influenced by the inhomogeneity. In this paper, we studied the characteristics of the guidance force relaxation between the HTS bulk and the NdFeB guideway by an experiment in which AC external magnetic field generated by an electromagnet was used to simulate the time-varying external magnetic field caused by the inhomogeneity of the guideway. From the experiment results, it was found that the guidance force was decreased with the application of the AC external magnetic field, and the decay increased with the amplitude and was almost independent of the frequency.

Genetic and Environmental Associations Between Procrastination and Internalizing/Externalizing Psychopathology.

Science.gov (United States)

Gustavson, Daniel E; du Pont, Alta; Hatoum, Alexander S; Hyun Rhee, Soo; Kremen, William S; Hewitt, John K; Friedman, Naomi P

2017-09-01

Recent work on procrastination has begun to unravel the genetic and environmental correlates of this problematic behavior. However, little is known about how strongly procrastination is associated with internalizing and externalizing psychopathology, and the extent to which shared genetic/environmental factors or relevant personality constructs (e.g., fear of failure, impulsivity, and neuroticism) can inform the structure of these associations. The current study examined data from 764 young adult twins who completed questionnaires assessing procrastination and personality and structured interviews regarding psychopathology symptoms. Results indicated that procrastination was positively correlated with both internalizing and externalizing latent variables, and that these correlations were driven by shared genetic influences. Moreover, the association between procrastination and internalizing was accounted for by fear of failure and neuroticism, whereas the association between procrastination and externalizing was primarily explained by impulsivity. The role of procrastination in psychopathology is discussed using a framework that highlights common and broadband-specific variance.

Evaluation of structural reliability for vacuum vessel under external pressure and electromagnetic force

International Nuclear Information System (INIS)

Minato, Akio

1983-08-01

Static and dynamic structural analyses of the vacuum vessel for a Swimming Pool Type Tokamak Reactor (SPTR) have been conducted under the external pressure (hydraulic and atmospheric pressure) during normal operation or the electromagnetic force due to plasma disruption. The reactor structural design is based on the concept that the adjacent modules of the vacuum vessel are not connected mechanically with bolts in the torus inboard region each other, so as to save the required space for inserting the remote handling machine for tightenning and untightenning bolts in the region and to simplify the repair and maintenance of the reactor. The structural analyses of the vacuum vessel have been carried out under the external pressure and the electromagnetic force and the structural reliability against the static and dynamic loads is estimated. The several configurations of the lip seal between the modules, which is required to make a plasma vacuum boundary, have been proposed and the structural strength under the forced displacements due to the deformation of the vacuum vessel is also estimated. (author)

Environmental Assessment for Proposed Security Forces Operations Facility, Buckley Air Force Base, Colorado

National Research Council Canada - National Science Library

Meyer, Elizabeth; Myklebust, Jessica; Denier, James; Christner, Jennifer; Fontaine, Kathyrn

2006-01-01

The United States Air Force (USAF) has prepared this EA in accordance with the National Environmental Policy Act to evaluate the potential environmental and social impacts from the construction and operation of the proposed SFOF...

Pesticide Environmental Accounting: A method for assessing the external costs of individual pesticide applications

International Nuclear Information System (INIS)

Leach, A.W.; Mumford, J.D.

2008-01-01

The Pesticide Environmental Accounting (PEA) tool provides a monetary estimate of environmental and health impacts per hectare-application for any pesticide. The model combines the Environmental Impact Quotient method and a methodology for absolute estimates of external pesticide costs in UK, USA and Germany. For many countries resources are not available for intensive assessments of external pesticide costs. The model converts external costs of a pesticide in the UK, USA and Germany to Mediterranean countries. Economic and policy applications include estimating impacts of pesticide reduction policies or benefits from technologies replacing pesticides, such as sterile insect technique. The system integrates disparate data and approaches into a single logical method. The assumptions in the system provide transparency and consistency but at the cost of some specificity and precision, a reasonable trade-off for a method that provides both comparative estimates of pesticide impacts and area-based assessments of absolute impacts. - A method to estimate the external costs of a pesticide application based on the ecotoxicology, environmental behaviour and application rate of an active ingredient

Life Cycle Assessment, ExternE and Comprehensive Analysis for an integrated evaluation of the environmental impact of anthropogenic activities

Energy Technology Data Exchange (ETDEWEB)

Pietrapertosa, F.; Cosmi, C. [National Research Council, Institute of Methodologies for Environmental Analysis C.N.R.-I.M.A.A. C.da S.Loja, I-85050 Tito Scalo (PZ) (Italy); National Research Council, National Institute for the Physics of Matter, C.N.R.-I.N.F.M. Via Cinthia, I-80126 Naples (Italy); Macchiato, M. [Federico II University, Department of Physical Sciences, Via Cinthia, I-80126 Naples (Italy); National Research Council, National Institute for the Physics of Matter, C.N.R.-I.N.F.M. Via Cinthia, I-80126 Naples (Italy); Salvia, M.; Cuomo, V. [National Research Council, Institute of Methodologies for Environmental Analysis C.N.R.-I.M.A.A. C.da S.Loja, I-85050 Tito Scalo (PZ) (Italy)

2009-06-15

The implementation of resource management strategies aimed at reducing the impacts of the anthropogenic activities system requires a comprehensive approach to evaluate on the whole the environmental burdens of productive processes and to identify the best recovery strategies from both an environmental and an economic point of view. In this framework, an analytical methodology based on the integration of Life Cycle Assessment (LCA), ExternE and Comprehensive Analysis was developed to perform an in-depth investigation of energy systems. The LCA methodology, largely utilised by the international scientific community for the assessment of the environmental performances of technologies, combined with Comprehensive Analysis allows modelling the overall system of anthropogenic activities, as well as sub-systems, the economic consequences of the whole set of environmental damages. Moreover, internalising external costs into partial equilibrium models, as those utilised by Comprehensive Analysis, can be useful to identify the best paths for implementing technology innovation and strategies aimed to a more sustainable energy supply and use. This paper presents an integrated application of these three methodologies to a local scale case study (the Val D'Agri area in Basilicata, Southern Italy), aimed to better characterise the environmental impacts of the energy system, with particular reference to extraction activities. The innovative methodological approach utilised takes advantage from the strength points of each methodology with an added value coming from their integration as emphasised by the main results obtained by the scenario analysis. (author)

Perspective on energy security and other non environmental externalities in electricity generation

International Nuclear Information System (INIS)

Bohi, D.R.

1994-01-01

Applications of the term externality to non environmental matters are often controversial and ambiguous. This paper argues that these externalities are also rarer or less important than sometimes alleged. The paper examines various potential energy security externalities and concludes that none of them are relevant to decisions regarding electric generation. Externalities may exist with regard to effects on local employment and the local infrastructure, although their importance is location specific and their measurement is highly subjective. In short, the consideration of this subset of externalities may confuse policy makers more than it helps them. (author). 15 refs

External Knowledge Sourcing and Green Innovation Growth with Environmental and Energy Regulations: Evidence from Manufacturing in China

Directory of Open Access Journals (Sweden)

Jian Hou

2017-02-01

Full Text Available This paper adopts the slacks-based measure-directional distance function (SBM-DDF, 2009 method for deriving the “Green Innovation Growth” rates of 28 manufacturing industries in China. The results indicate that the overall level of green innovation growth in China’s manufacturing is relatively low, with a declining trend. The tradeoffs among energy, environment and economy are rather sharp, and the “Porter Effect (1995” (environmental regulation will promote green technology innovation is not currently realized quickly in manufacturing. These evaluations imply an unsustainable development model in China, with significant differences among industries. By using a dynamic panel threshold model and employing an industry-level panel dataset for 2008–2014, we show that external knowledge sourcing has a significant negative impact on green innovation growth but with different constraints on R&D levels among industries. With the strengthening of R&D levels, gradually surpassing “critical mass”, the negative role of external knowledge sourcing in driving this mechanism becomes smaller and smaller; it has a non-linear relationship with the “threshold effect”. Consequently, we provide insights into the relationship among energy consumption, environmental pollution and technology innovation, and show how the heterogeneity of the R&D threshold affects differences in external knowledge sourcing and green innovation growth. These insights lead to a better understanding of the driving force, realizing path and policy design for green innovation growth.

EXTERNAL FORCES DRIVING CHANGE IN THE ROMANIAN SMALL AND MEDIUM SIZED ENTERPRISES

Directory of Open Access Journals (Sweden)

Roiban Roxana Nadina

2012-07-01

Full Text Available Change is a constant in everyday life confronting organizations to continuously adapt their strategy, structure, processes, and culture in order to survive and stay competitive on the market. Implementing organizational change is one of the most important skills required for managers and in the meantime the most difficult one. The forces driving change within an organization, that can be either external or internal, are those that propel a company forward towards change and in order to identify the need for change and make the proper changes, managers have to develop a tool that allows them to analyze how does the environment influence their business activities. A vision for change will clarify the directions in which the organization needs to move, starting from its current state and taking in consideration the existing opportunities and threats from the environment that allow to move to a future desired state. The purpose of this paper is to identify the concern for change in the Romanian small and medium sized enterprises by presenting and explaining the past and present influences of the main external forces that have determined the need for change in the last 3-5 years and to make recommendations about future possible changes that have to be performed by managers for a better harmonization with the environment. The research method used for this study is the interview on a sample that contains some of the most relevant SME’s from the western side of Romania, from different industries. We analyzed the main external forces that had an impact on the small and medium sized enterprises and how were they generating the need for organizational change, in order to see which present and future changes are required.

Pricing environmental externalities in the power sector. Ethical limits and implications for social choice

International Nuclear Information System (INIS)

Soderholm, Patrik; Sundqvist, Thomas

2003-01-01

During the last decade, a series of valuation studies have made attempts at estimating the external environmental costs of various power generation sources. The purposes of this paper are: (a) to explore some of the ethical limits of the economic valuation of environmental impacts; and (b) to analyze what the implications are of these limits for the social choice between different electric power sources. Environmental valuation based on welfare economic theory builds on restrictive behavioral foundations and can only partly model moral values, although such values are an essential part of people's preference towards the environment. In addition, public preferences are seldom exogenously given as is commonly assumed in economic theory, but are instead formed in public discourse. For this reason, the range of electricity externalities where economic valuation (and thus cost-benefit analysis) should be applied is likely to be narrower than often assumed. After analyzing the scope, methodology and the results of the so-called ExternE project, the paper concludes that many power generation externalities are either inherently 'new' or inherently 'complex'. In these cases, the initial challenge lies not in 'discovering' private preferences, but in specifying the conditions for public discourse over common ways of understanding what the pertinent issues are about. This implies that research on the environmental externalities of power generation must, in addition to refining the theory and the applications of existing non-market valuation techniques, also address the instruments and content of political and moral debate

External factors influencing the environmental performance of South African firms

CSIR Research Space (South Africa)

Peart, R

2001-01-01

Full Text Available This article reviews the external factors that influence environmental performance of companies in South Africa, drawing on international and local literature. After considering factors within the natural, social, economic and institutional...

Genetic and environmental influences on the familial transmission of externalizing disorders in adoptive and twin offspring.

Science.gov (United States)

Hicks, Brian M; Foster, Katherine T; Iacono, William G; McGue, Matt

2013-10-01

Twin-family studies have shown that parent-child resemblance on substance use disorders and antisocial behavior can be accounted for by the transmission of a general liability to a spectrum of externalizing disorders. Most studies, however, include only biological parents and offspring, which confound genetic and environmental transmission effects. To examine the familial transmission of externalizing disorders among both adoptive (genetically unrelated) and biological relatives to better distinguish genetic and environmental mechanisms of transmission. Family study design wherein each family included the mother, father, and 2 offspring, including monozygotic twin, dizygotic twin, nontwin biological, and adoptive offspring. Structural equation modeling was used to estimate familial transmission effects and their genetic and environmental influences. Participants were recruited from the community and assessed at a university laboratory. A total of 1590 families with biological offspring and 409 families with adoptive offspring. Offspring participants were young adults (mean age, 26.2 years). Symptom counts of conduct disorder, adult antisocial behavior, and alcohol, nicotine, and drug dependence. RESULTS There was a medium effect for the transmission of the general externalizing liability for biological parents (r = 0.27-0.30) but not for adoptive parents (r = 0.03-0.07). In contrast, adoptive siblings exhibited significant similarity on the general externalizing liability (r = 0.21). Biometric analyses revealed that the general externalizing liability was highly heritable (a2 = 0.61) but also exhibited significant shared environmental influences (c2 = 0.20). Parent-child resemblance for substance use disorders and antisocial behavior is primarily due to the genetic transmission of a general liability to a spectrum of externalizing disorders. Including adoptive siblings revealed a greater role of shared environmental influences on the general externalizing liability

Environmental externalities: Applying the concept to Asian coal-based power generation

International Nuclear Information System (INIS)

Szpunar, C.B.; Gillette, J.L.

1993-03-01

This report examines the concept of environmental externality. It discusses various factors -- the atmospheric transformations, relationship of point-source emissions to ambient air quality, dose-response relationships, applicable cause-and-effect principles, and risk and valuation research -- that are considered by a number of state utilities when they apply the environmental externality concept to energy resource planning. It describes a methodology developed by Argonne National Laboratory for general use in resource planning, in combination with traditional methods that consider the cost of electricity production. Finally, it shows how the methodology can be applied in Indonesia, Thailand, and Taiwan to potential coal-fired power plant projects that will make use of clean coal technologies

Environmental externalities: Applying the concept to Asian coal-based power generation

Energy Technology Data Exchange (ETDEWEB)

Szpunar, C.B.; Gillette, J.L.

1993-03-01

This report examines the concept of environmental externality. It discusses various factors -- the atmospheric transformations, relationship of point-source emissions to ambient air quality, dose-response relationships, applicable cause-and-effect principles, and risk and valuation research -- that are considered by a number of state utilities when they apply the environmental externality concept to energy resource planning. It describes a methodology developed by Argonne National Laboratory for general use in resource planning, in combination with traditional methods that consider the cost of electricity production. Finally, it shows how the methodology can be applied in Indonesia, Thailand, and Taiwan to potential coal-fired power plant projects that will make use of clean coal technologies.

Consideration of environmental externality costs in electric utility resource selections and regulation

International Nuclear Information System (INIS)

Ottinger, R.L.

1990-01-01

A surprising number of state electric utility regulatory commissions (half) have started to require consideration of environmental externality costs in utility planning and resource selection. The principal rationale for doing so is that electric utility operations impose very real and large damages to human health and the environment which are not taken into account by traditional utility least cost planning, resource selection procedures, or by government pollution regulation. These failures effectively value the residual environmental costs to society of utility operations at zero. The likely future prospect for more stringent governmental pollution regulation renders imprudent the selection of resources without taking environmental externality costs into consideration. Most regulatory commissions requiring environmental externality consideration have left it to the utilities to compute the societal costs, although a few have either set those costs themselves or used a proxy adder to polluting resource costs (or bonus for non-polluting resources). These commissions have used control or pollution mitigation costs, rather than societal damage costs, in their regulatory computations. This paper recommends that damage costs be used where adequate studies exist to permit quantification, discusses the methodologies for their measurement, and describes the means that have been and might be used for their incorporation

Valuing environmental externalities from rice-wheat farming in the lower reaches of the Yangtze River

Energy Technology Data Exchange (ETDEWEB)

Lv, Yao; Gu, Shu-zhong [Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing 100101 (China); Guo, Dong-mei [Policy Research Center for Environment and Economy, State Environmental Protection Administration, Beijing 100029 (China)

2010-05-15

Environmental externalities generated by agriculture are attracting considerable attention. However, most research has focused either on environmental services that agriculture provides as a distinct ecosystem or the negative environmental impacts that agriculture imposes. Therefore, there is a great need to re-evaluate the all-round environmental roles of agriculture, to optimize environmental performance of agriculture and non-trade concerns in World Trade Organization (WTO) negotiations. By valuing the environmental externalities of agriculture, this article aims to heighten awareness of the environmental roles of agriculture to stimulate its implication in agricultural policy-making. The study presents estimates of economic values of environmental externalities from rice-wheat farming system in Zhenjiang, in aspects of greenhouse gas emissions, non-point source pollution, carbon sequestration and water containing capacity. We provide a step-by-step analytic procedure, with each step including measurement of physical dimensions and monetary evaluation. The former is based on a large-scale literature review, which provided a vital foundation for the monetary valuation. The results reveal that the values of greenhouse gas emissions from agricultural land, agricultural non-point source pollution, carbon sequestration by crop and soil, and the flood control function provided by agricultural land are estimated as: - US$3.61 x 10{sup 7} a{sup -1}, - US$4.59 x 10{sup 6} a{sup -1}, + US$2.30 x 10{sup 9} a{sup -1} and + US$2.21 x 10{sup 7} a{sup -1}, respectively. The net value of environmental externalities is as high as + US$2.28 x 10{sup 9} a{sup -1}, representing 17.87% of local GDP and 4.12 times the total agricultural output value in 2006. The results suggest that crops and soil in Zhenjiang are the most important carbon sinks, and that agriculture in Zhenjiang has huge positive environmental externalities, although both greenhouse gas emissions from agricultural

Environmental Externalities Related to Power Production Technologies in Denmark

DEFF Research Database (Denmark)

Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

1997-01-01

of the Danish part of the project is to implement the framework for externality evaluation, for three different power plants located in Denmark. The paper will focus on the assessment of the impacts of the whole fuel cycles for wind, natural gas and biogas. Priority areas for environmental impact assessment...

Do Internal and external environmental management contribute to the triple bottom line?

NARCIS (Netherlands)

De Giovanni, P.

2012-01-01

Purpose: The purpose of this paper is to investigate the effect of both internal and external environmental management (EM) on the triple bottom line (TBL), which embraces environmental, economic, and social performance. Both direct and indirect effects are estimated in order to capture the overall

Environmental Assessment for the General Plan and Maintenance of Patrick Air Force Base, Florida

Science.gov (United States)

2005-05-01

considered viable. P A F B G e n e r a l P l a n E A 2 Environmental Effects The General Plan EA evaluated the environmental impacts of...year cycle. The potential environmental effects were assessed for the following environmental resource areas: air quality, water quality, geology...ADP Area Development Plan AF Air Force AFB Air Force Base AFETR Air Force Eastern Test Range AFI Air Force Instruction AFMAN Air Force Manual

Driving forces and barriers for environmental technology development

International Nuclear Information System (INIS)

2005-01-01

Driving forces and barriers behind development and usage of environmental technology is discussed, and also whether there are certain characteristics related to environmental innovations compared to other innovations in general. The development of environmental technology is in principle dominated by the same drivers and barriers as any other technology, but the order and strength of the various factors may be different. This examination as well as other empirical studies shows that regulations play a greater part for environmental technology than 'pure market forces'. To many participants it is important to be one step ahead of the regulations, i.e. the expected regulations are equally important as the factual ones in driving the technology development. Players in the business community express that it is important that the authorities cooperate with them when introducing new regulations. This will increase acceptance for the regulations and facilitate the necessary adjustments. The most important barrier in the development and use of the technologies studied is probably the lack of demand

Externalities of energy. Swedish implementation of the ExternE methodology

International Nuclear Information System (INIS)

Nilsson, Maans; Gullberg, M.

1998-01-01

The growing interest for developing economic instruments for efficient environmental policies has opened up a large area of multi-disciplinary research. ExternE is an example of this research, combining disciplines such as engineering, ecology, immunology and economics expertise to create new knowledge about how environmental pressures from energy production affect our nature and society. The ExternE Project aims to identify and, as far as possible quantify the externalities of energy production in Europe. The Stockholm Environment Institute has carried out a preliminary aggregation: -Coal Fuel Cycle: centred around Vaesteraas Kraftvaermeverk, Vaesteraas. This is the largest co-generation plant in Sweden, with four blocks and a maximum co-generation output of 520 MW electricity and 950 MW heat. The analysis is carried out on boiler B4. -Biomass Fuel Cycle: centred around Haendeloeverket, Norrkoeping. This plant predominately burns forestry residues, but a variety of fuels are combusted. Haendeloeverket has an installed capacity of 100 MW electricity and 375 MW heat, in a total of three boilers and two back-pressure turbines. The analysis is carried out on boiler P13. -Hydro Fuel Cycle: Klippens Kraftstation, Storuman. Built in 1990-1994, it is the youngest hydro power station in Sweden. It has been designed and built with significant efforts to account for and protect environmental values. Installed capacity is 28 MW. The environmental impact assessment from the construction of this plant is carried out, but the evaluation is still not finalized. The preliminary aggregation aimed to test whether ExternE results could be used to make estimates for the entire Swedish electricity production system. Hence, national results as well as results from other partner countries in ExternE has been applied

Amplitude and phase fluctuations of Van der Pol oscillator under external random forcing

Science.gov (United States)

Singh, Aman K.; Yadava, R. D. S.

2018-05-01

The paper presents an analytical study of noise in Van der Pol oscillator output subjected to an external force noise assumed to be characterized by delta function (white noise). The external fluctuations are assumed to be small in comparison to the average response of the noise free system. The autocorrelation function and power spectrum are calculated under the condition of weak nonlinearity. The latter ensures limit cycle oscillations. The total spectral power density is dominated by the contributions from the phase fluctuations. The amplitude fluctuations are at least two orders of magnitude smaller. The analysis is shown to be useful to interpretation microcantilever based biosensing data.

Monetization of Environmental Externalities (Emissions from Bioenergy

Directory of Open Access Journals (Sweden)

Isabelle BROSE

2008-01-01

Full Text Available Bioenergy from agriculture is today in the heart of sustainabledevelopment, integrating its key components: environment and climate change,energy economics and energy supply, agriculture, rural and social development.Each bioenergy production route presents externalities that must be assessed inorder to compare one bioenergy route to another (bioenergy route. The lack ofprimary and reliable data on externalities is, nevertheless, an important nontechnologicalbarrier to the implementation of the best (bioenergy routes. In thisarticle, we want to monetize one environmental externality from bioenergy:emissions (GHG: CO2, CH4, N2O, O3; CO, NOx, SO2, metal, and PM. We have tomonetize emissions on the basis of their effects on health, global warming, and soiland water quality. Emissions will be quantified through Life Cycle Analysis (LCAand ECOINVENT database. Impacts on health will be monetized on the basis ofmortality (number of life expectancy years lost multiplied by Value Of Life Year(VOLY and morbidity (number of ill persons multiplied by Cost Of Illness(COI. Impacts on global warming will be monetized by Benefits Transfers fromthe Stern Review and its critics. Finally, impacts on soil and water quality will bemonetized by Averting Behaviour or Defensive Expenses methods. Monetizationresults will be gathered, weighted, and incorporated in states and firms’ decisionmakingtools. They would enhance capacity of policy makers and managers tochose the best (bioenergy routes.

Estimation of environmental external costs between coal fired power plant and nuclear power plant

International Nuclear Information System (INIS)

Moon, G. H.; Kim, S. S.

2000-01-01

First of all, this study evaluated the impacts on the health and the environment of air pollutants emitted from coal power plant and nuclear power pant, two major electric power generating options in Korea. Then, the environmental external costs of those two options were estimated by transforming the health and environment impact into monetary values. To do this, AIRPACTS and Impacts of Atmospheric Release model developed by IAEA were used. The environmental external cost of Samcheonpo coal power plant was estimated about 25 times as much as that of Younggwang nuclear power plant. This result implies that nuclear power plant is a clean technology compared with coal power plant. This study suggests that the external cost should be reflected in the electric system expansion plan in order to allocate energy resources efficiently and to reduce economic impact stemming from the environmental regulation emerged recently on a global level

Pesticide Environmental Accounting: a method for assessing the external costs of individual pesticide applications.

Science.gov (United States)

Leach, A W; Mumford, J D

2008-01-01

The Pesticide Environmental Accounting (PEA) tool provides a monetary estimate of environmental and health impacts per hectare-application for any pesticide. The model combines the Environmental Impact Quotient method and a methodology for absolute estimates of external pesticide costs in UK, USA and Germany. For many countries resources are not available for intensive assessments of external pesticide costs. The model converts external costs of a pesticide in the UK, USA and Germany to Mediterranean countries. Economic and policy applications include estimating impacts of pesticide reduction policies or benefits from technologies replacing pesticides, such as sterile insect technique. The system integrates disparate data and approaches into a single logical method. The assumptions in the system provide transparency and consistency but at the cost of some specificity and precision, a reasonable trade-off for a method that provides both comparative estimates of pesticide impacts and area-based assessments of absolute impacts.

Testing the role of external debt in environmental degradation: empirical evidence from Turkey.

Science.gov (United States)

Katircioglu, Salih; Celebi, Aysem

2018-03-01

This study investigates the role of external debt stock in Turkey, which has suffered from heavy (external and domestic) debt stock for many years. Annual data from 1960 to 2013 was analyzed using time series analysis in order to study this. The results confirm the validity of the conventional environmental Kuznets curve (EKC) in the case of Turkey. However, this study also found that Turkey's external debt stock did not influence the Turkish economy's long-term EKC behavior. Fortunately, the results suggest that there are important interactions among external debt stock, CO 2 emissions, energy consumption, and real income; that is, changes in external debt volume precede changes in these aggregates' volumes.

Inducing and destruction of chimeras and chimera-like states by an external harmonic force

Science.gov (United States)

Shepelev, I. A.; Vadivasova, T. E.

2018-03-01

We study the phenomena of chimera destruction and inducing of chimera-like states in an ensemble of nonlocally coupled chaotic Rössler oscillators under an external harmonic force. The localized harmonic influence can lead to both destruction and changing of the spatial topology of chimeras. At the same time this influence can cause the emergence of stable chimera-like states (induced chimeras) for the regime of partial coherent chaos. Induced chimeras are also observed for the global influence. We show the possibility of controlling the chimera-like state topology by varying the parameters of localized external harmonic influence.

Complex dynamics in three-well duffing system with two external forcings

International Nuclear Information System (INIS)

Jing Zhujun; Huang Jicai; Deng Jin

2007-01-01

Three-well duffing system with two external forcing terms is investigated. The criterion of existence of chaos under the periodic perturbation is given by using Melnikov's method. By using second-order averaging method and Melnikov's method we proved the criterion of existence of chaos in averaged systems under quasi-periodic perturbation for ω 2 = nω 1 + εν, n = 1, 3, 5, and cannot prove the criterion of existence of chaos in second-order averaged system under quasi-periodic perturbation for ω 2 = nω 1 + εν, n = 2, 4, 6, 7, 8, 9, 10, 11, 12, where ν is not rational to ω 1 , but can show the occurrence of chaos in original system by numerical simulation. Numerical simulations including heteroclinic and homoclinic bifurcation surfaces, bifurcation diagrams, maximum Lyapunov exponents and Poincare map are given to illustrate the theoretical analysis, and to expose the more new complex dynamical behaviors. We show that cascades of period-doubling bifurcations from period-one to four orbits, cascades of interlocking period-doubling bifurcations from period-two orbits of two sets, from quasi-periodicity leading to chaos, onset of chaos which occurs more than one, interleaving occurrences of chaotic behavior and invariant torus, transient chaos with complex period windows and interior crisis, chaos converting to torus, different kind of chaotic attractors. Our results shows that the dynamical behaviors are different from the dynamics of duffing equation with two-well and two external forcings

Entropic stochastic resonance without external force in oscillatory confined space

Energy Technology Data Exchange (ETDEWEB)

Ding, Huai; Jiang, Huijun; Hou, Zhonghuai, E-mail: hzhlj@ustc.edu.cn [Department of Chemical Physics and Hefei National Laboratory for Physical Sciences at Microscales, iChEM, University of Science and Technology of China, Hefei, Anhui 230026 (China)

2015-05-21

We have studied the dynamics of Brownian particles in a confined geometry of dumbbell-shape with periodically oscillating walls. Entropic stochastic resonance (ESR) behavior, characterizing by a maximum value of the coherent factor Q at some optimal level of noise, is observed even without external periodic force in the horizontal direction, which is necessary for conventional ESR where the wall is static and the particle is subjected to the force. Interestingly, the ESR can be remarkably enhanced by the particle gravity G, in contrast to the conventional case. In addition, Q decreases (increases) with G in the small (large) noise limit, respectively, while it non-monotonically changes with G for moderate noise levels. We have applied an effective 1D coarsening description to illustrate such a nontrivial dependence on G, by investigating the property of the 1D effective potential of entropic nature and paying special attention to the excess part resulting from the boundary oscillation. Dependences of the ESR strength with other related parameters are also discussed.

Foreign direct investment, institutional development, and environmental externalities: evidence from China.

Science.gov (United States)

Wang, Danny T; Chen, Wendy Y

2014-03-15

The question of how foreign direct investment (FDI) affects a host country's natural environment has generated much debate but little consensus. Building on an institution-based theory, this article examines how the institutional development of a host setting affects the degree of FDI-related environmental externalities in China (specifically, industrial sulfur dioxide emissions). With a panel data set of 287 Chinese cities, over the period 2002-2009, this study reveals that FDI in general induces negative environmental externalities. Investments from OECD countries increase sulfur dioxide emissions, whereas FDI from Hong Kong, Macau, and Taiwan shows no significant effect. Institutional development reduces the impacts of FDI across the board. By focusing on the moderating role of institutions, this study sheds new light on the long-debated relationships among FDI, institutions, and the environments of the host countries. Copyright © 2014 Elsevier Ltd. All rights reserved.

Measuring the environmental benefits of hydrogen transportation fuel cycles under uncertainty about external costs

International Nuclear Information System (INIS)

Chernyavs'ka, Liliya; Gulli, Francesco

2010-01-01

In this paper, we attempt to measure the environmental benefits of hydrogen deployment in the transportation sector. We compare the hydrogen pathways to the conventional transportation fuel cycles in terms of external costs, estimated using the results of the most accurate methodologies available in this field. The central values of performed analysis bring us ambiguous results. The external cost of the best conventional solution ('oil to diesel hybrid internal-combustion engine') in some cases is just higher and in others just lower than that of the best fossil fuel to hydrogen solution ('natural gas to hydrogen fuel cell'). Nevertheless, by accounting for the uncertainty about external costs, we are able to remove this ambiguity highlighting that the hydrogen pathway provides significant environmental benefits ,especially in densely populated areas, assuming 100% city driving.

Influence of AC external magnetic field perturbation on the guidance force of HTS bulk over a NdFeB guideway

International Nuclear Information System (INIS)

Zhang Longcai; Wang Jiasu; Wang Suyu; He Qingyong

2007-01-01

Superconducting maglev vehicle system requires that the surface magnetic field of the guideway is uniform along the forward direction. But in practice the surface magnetic field of the NdFeB permanent magnet guideway is not always immutable. So the HTS bulks in this case are exposed to AC external magnetic field, which may induce the energy loss in the bulk and influence the guidance force between the HTS bulks and the NdFeB guideway. In this paper, we experimentally studied the influence of the AC external magnetic field perturbation on the guidance force of a HTS bulk over the NdFeB guideway. The experimental results showed that the guidance force was influenced by the application of the AC external magnetic. The guidance fore hysteresis became more evident with the amplitude of the AC field and was independent of the frequency in the range 90-400 Hz. We attributed the reason to magnetic hysteresis loss in the superconductor

Influence of AC external magnetic field perturbation on the guidance force of HTS bulk over a NdFeB guideway

Energy Technology Data Exchange (ETDEWEB)

Zhang Longcai [Applied Superconductivity Laboratory, Southwest Jiaotong University, P.O. Box 152, Chengdu, Sichuan 610031 (China)]. E-mail: zhlcai2000@163.com; Wang Jiasu [Applied Superconductivity Laboratory, Southwest Jiaotong University, P.O. Box 152, Chengdu, Sichuan 610031 (China); Wang Suyu [Applied Superconductivity Laboratory, Southwest Jiaotong University, P.O. Box 152, Chengdu, Sichuan 610031 (China); He Qingyong [Applied Superconductivity Laboratory, Southwest Jiaotong University, P.O. Box 152, Chengdu, Sichuan 610031 (China)

2007-08-01

Superconducting maglev vehicle system requires that the surface magnetic field of the guideway is uniform along the forward direction. But in practice the surface magnetic field of the NdFeB permanent magnet guideway is not always immutable. So the HTS bulks in this case are exposed to AC external magnetic field, which may induce the energy loss in the bulk and influence the guidance force between the HTS bulks and the NdFeB guideway. In this paper, we experimentally studied the influence of the AC external magnetic field perturbation on the guidance force of a HTS bulk over the NdFeB guideway. The experimental results showed that the guidance force was influenced by the application of the AC external magnetic. The guidance fore hysteresis became more evident with the amplitude of the AC field and was independent of the frequency in the range 90-400 Hz. We attributed the reason to magnetic hysteresis loss in the superconductor.

Internal and external influences on pro-environmental behavior: participation in a green electricity program

International Nuclear Information System (INIS)

Clark, C.F.; Moore, M.R.; Kotchen, M.J.; Michigan Univ., Ann Arbor, MI

2003-01-01

This paper integrates themes from psychology and economics to analyze pro-environmental behavior. Increasingly, both disciplines share an interest in understanding internal and external influences on behavior. In this study, we analyze data from a mail survey of participants and non-participants in a premium-priced, green electricity program. Internal variables consist of a newly developed scale for altruistic attitudes based on the Schwartz norm-activation model, and a modified version of the New Ecological Paradigm scale to measure environmental attitudes. External variables consist of household income and standard socio-demographic characteristics. The two internal variables and two external variables are significant in a logit model of the decision to participate in the program. We then focus on participants in the program and analyze their specific motives for participating. These include motives relating to several concerns: ecosystem health, personal health, environmental quality for residents in southeastern Michigan, global warming, and warm-glow (or intrinsic) satisfaction. In a statistical ranking of the importance of each motive, a biocentric motive ranks first, an altruistic motive ranks second, and an egoistic motive ranks third. (author)

Internalizing external environmental costs of agriculture into product prices, Case study for milk and potatoes

NARCIS (Netherlands)

Masselink, Dirk Jan

2007-01-01

Society has to pay large amounts of money to compensate for the environmental damages caused by farm emissions. These external costs are not fully accounted for in product prices and internalization of these external costs into the cost price of agricultu

Final Environmental Assessment Travis Air Force Base Burke Property Housing

National Research Council Canada - National Science Library

1999-01-01

... (40 CFR Parts 1500-1508) and Air Force Instruction 32-7061, the U.S. Air Force conducted an assessment of the potential environmental consequences of the construction of up to 281 military family housing units at Travis AFB...

Assessment of private economic benefits and positive environmental externalities of tea plantation in China.

Science.gov (United States)

Xue, Hui; Ren, Xiaoyi; Li, Shiyu; Wu, Xu; Cheng, Hao; Xu, Bin; Gu, Baojing; Yang, Guofu; Peng, Changhui; Ge, Ying; Chang, Jie

2013-10-01

Tea plantations are rapidly expanding in China and other countries in the tropical and subtropical zones, driven by relatively high private economic benefit. However, the impact of tea plantations on the regional environment, including ecosystem services and disservices are unclear. In this study, we developed an assessment framework for determining the private economic benefits and environmental externalities (the algebraic sum of the regulating services and disservices) of tea plantations in China. Our results showed that tea plantations provided private economic benefits of 5,652 yuan ha(-1) year(-1) (7.6 yuan = 1 USD in 2007) for tea farmers, plus positive environmental externalities of 6,054 yuan ha(-1) year(-1) for the society. The environmental externalities were calculated as the sum of the value of four regulating services, including carbon sequestration (392 yuan ha(-1) year(-1)); soil retention (72 yuan ha(-1) year(-1)); soil fertility protection (3,189 yuan ha(-1) year(-1)) and water conservation (2,685 yuan ha(-1) year(-1)), and three disservices, including CO2 emission (-39 yuan ha(-1) year(-1)), N2O emission (-137 yuan ha(-1) year(-1)) and nonpoint source pollution (-108 yuan ha(-1) year(-1)). Before the private optimal level, the positive environmental externalities can be maintained by private economic benefits; if a social optimal level is required, subsidies from government are necessary.

Down the slippery slop: Utility incorporation of environmental externalities

International Nuclear Information System (INIS)

Vandenberg, A.J.; Tempchin, R.S.; Mitnick, S.A.; Harron, A.L.

1993-01-01

Advocates of incorporating environmental externalities in electric utility decision-making have concentrated on new electric generating resources, with some success. Such public utility commission actions compel utilities to consider, explicitly, the cost of sulfur dioxide, carbon dioxide, nitrogen oxides and other emission of power-plants when comparing the economics of new generating resources with those of other resource options (e.g., demand-side management and gas-fired non-utility generator projects). This paper summarizes a study which estimated costs of incorporating externalities in utility system operations. We also present an analysis of the Tellus work in this area, and contrast Tellus' methodology, assumptions and results with our own. Estimates of the cost of incorporating externalities in system operations is rather large, in terms of the increased fuel and purchased power cost that ratepayers would have to bear. For the eight cases we examined, the incorporation of externalities caused fuel and purchased power cost to be 9.3 to 69.5 percent higher, relative to what it would have been under traditional generating unit commitment and dispatch. Furthermore, we believe that these estimates of fuel and purchased power cost increases are conservative. In particular, because our analyses focused on utility system operations in 1995, the key assumption about the fuel cost differential (i.e., coal versus natural gas) probably underestimates the differential in later years, significantly, when virtually all forecasters foresee faster cost escalation rates for gas. In general, the higher the fuel cost differential, the faster cost escalation rates for gas. In general, the higher the fuel cost differential, the greater the cost of an externality policy. Unless the record is set straight soon, the idea that incorporating externalities is virtually costless will further spread in the regulatory community and among government policy-makers

Economic evaluation of environmental externalities in China’s coal-fired power generation

International Nuclear Information System (INIS)

Zhao, Xiaoli; Cai, Qiong; Ma, Chunbo; Hu, Yanan; Luo, Kaiyan; Li, William

2017-01-01

Serious environmental externalities exist in China’s power industry. Environmental economics theory suggests that the evaluation of environmental externality is the basis of designing an efficient regulation. The purposes of this study are: (1) to identify Chinese respondents’ preferences for green development of electric power industry and the socio-economic characteristics behind them; (2) to investigate the different attitudes of the respondents towards pollution and CO_2 reduction; (3) to quantitatively evaluate the environmental cost of China’s coal-fired power generation. Based on the method of choice experiments (CE) and the 411 questionnaires with 2466 data points, we found that Chinese respondents prefer PM2.5, SO_2 and NO_x reduction to CO_2 reduction and that the environment cost of coal-fired power plants in China is 0.30 yuan per kWh. In addition, we found that the socio-economic characteristics of income, education, gender, and environmental awareness have significant impacts on respondents’ choices. These findings indicate that the environmental cost of coal-fired power generation is a significant factor that requires great consideration in the formulation of electric power development policies. In addition, importance should also be attached to the implementation of green power price policy and enhancement of environmental protection awareness. - Highlights: • Chinese respondents have willingness to pay premium for green development. • The environment cost of coal-fired power plants in China is 0.30 yuan/kwh. • Chinese respondents prefer PM2.5, SO_2 and NO_x reduction to CO_2 reduction. • Environmental awareness has significant impacts on respondents’ preferences. • Income, education and gender affect the evaluation results.

ExternE: Externalities of energy Vol. 1. Summary

International Nuclear Information System (INIS)

Holland, M.; Berry, J.

1995-01-01

There is a growing requirement for policy analysts to take account of the environment in their decision making and to undertake the specified cost-benefit analysis. Within the European Union this is reflected in the 5th Environmental Action Programme, and the Commission's White Paper entitled 'Growth, competitiveness, employment and the ways forward to the 21st century'. This has led to a need for evaluation of environmental externalities. The ExternE Project commenced in 1991 as the European part of a collaborative study between the European Commission and the US Department of Energy. It aims to be the first systematic approach to the evaluation of external costs of a wide range of different fuel cycles. The project will result in an operational accounting framework for the quantification and monetarisation of priority environmental and other externalities. This framework will allow the calculation of the marginal external costs and benefits for specific power plants, at specific sites using specified technologies. There are three major phases in the project. Phase 1 was undertaken in collaboration with the US Department of Energy. In this phase the teams jointly developed the conceptual approach and methodology and shared scientific information for application to a number of fuel cycles. On the European side work concentrated on the nuclear and coal fuel cycles which together were expected to raise many of the fundamental issues in fuel cycle analysis. The project is currently nearing completion of Phase 2. During this phase the methodology has been applied to a wide range of different fossil, nuclear and renewable fuel cycles for power generation and energy conservation options. Also a series of National Implementation Programmes is underway in which the methodology and accounting framework are being applied to reference sites throughout Europe. In addition the general methodology is being extended to address the evaluation of externalities associated with

Dispersion of pollutants, environmental externalities due to a pulverized coal power plant and their effect on the cost of electricity

International Nuclear Information System (INIS)

Czarnowska, Lucyna; Frangopoulos, Christos A.

2012-01-01

Energy conversion systems generate pollution that causes damages to the environment and the society. The objective of this work is to study the dispersion of pollutants and assess the environmental and social cost due to pollution from such a system. For this purpose, a pulverized coal power plant is selected. Using thermodynamic principles combined with empirical techniques, the quantities of pollutants emitted by the plant are estimated. Then, using the EcoSenseWeb software, which is based on the results of the ExternE project, the external environmental cost (externalities) of pollution is assessed. The plant is considered as located in four different cities in Poland and the externalities are calculated for each city separately. It is shown that the external environmental cost has a strong influence on the unit cost of electricity. In addition, the dispersion of pollutants is presented for the plant located in Olsztyn city. Furthermore, the plant is considered as located near the capitals of European countries and the environmental externalities are calculated for each city. The neighboring countries that are strongly affected by the plant in each particular city are identified. The sensitivity of the unit cost of electricity to certain important parameters is investigated. -- Highlights: ► The external cost of pollution has a significant impact on the cost of electricity. ► The results depend on the particular plant, location and level (local-global). ► Externalities make the installation of abatement equipment economical. ► The source location of emissions has a significant effect on the external cost. ► The transboundary pollution has a strong effect on the environmental cost.

Accounting for external costs in a study of a Swedish district-heating system - An assessment of environmental policies

International Nuclear Information System (INIS)

Fahlen, E.; Ahlgren, E.O.

2010-01-01

Sweden has historically had strict emission control by implementation of economic policy instruments with the aim of internalising the external costs of air pollution. This study aims to evaluate how well current Swedish policy instruments reflect the environmental costs associated with heat generation in several district-heating (DH) plants in the DH system of Goeteborg. Furthermore, it aims to simulate and evaluate the operation of the DH system based on its social cost-effectiveness which takes into account the DH system's private and external costs (non-internalised environmental costs). The study shows that the economic policy instruments do not fully internalise all external costs whereas for certain technologies, the costs in terms of taxes, emission permits, environmental fees, etc. are higher than the environmental costs caused by the pollutants, given the environmental cost estimates used in the study. The simulation results show that the deviating internalisation of external costs affects the economic ranking of the different plants within the studied DH system. The estimated loss in social-cost effectiveness of the operation of the DH system of Goeteborg is noticable but relatively small if compared to the variable heat generation costs for most of the studied DH plants.

Internal and external environmental factors affecting the performance of hospital-based home nursing care.

Science.gov (United States)

Noh, J-W; Kwon, Y-D; Yoon, S-J; Hwang, J-I

2011-06-01

Numerous studies on HNC services have been carried out by signifying their needs, efficiency and effectiveness. However, no study has ever been performed to determine the critical factors associated with HNC's positive results despite the deluge of positive studies on the service. This study included all of the 89 training hospitals that were practising HNC service in Korea as of November 2006. The input factors affecting the performance were classified as either internal or external environmental factors. This analysis was conducted to understand the impact that the corresponding factors had on performance. Data were analysed by using multiple linear regressions. The internal and external environment variables affected the performance of HNC based on univariate analysis. The meaningful variables were internal environmental factors. Specifically, managerial resource (the number of operating beds and the outpatient/inpatient ratio) were meaningful when the multiple linear regression analysis was performed. Indeed, the importance of organizational culture (the passion of HNC nurses) was significant. This study, considering the limited market size of Korea, illustrates that the critical factor for the development of hospital-led HNC lies with internal environmental factors rather than external ones. Among the internal environmental factors, the hospitals' managerial resource-related factors (specifically, the passion of nurses) were the most important contributing element. © 2011 The Authors. International Nursing Review © 2011 International Council of Nurses.

Modes of interannual variability in northern hemisphere winter atmospheric circulation in CMIP5 models: evaluation, projection and role of external forcing

Science.gov (United States)

Frederiksen, Carsten S.; Ying, Kairan; Grainger, Simon; Zheng, Xiaogu

2018-04-01

Models from the coupled model intercomparison project phase 5 (CMIP5) dataset are evaluated for their ability to simulate the dominant slow modes of interannual variability in the Northern Hemisphere atmospheric circulation 500 hPa geopotential height in the twentieth century. A multi-model ensemble of the best 13 models has then been used to identify the leading modes of interannual variability in components related to (1) intraseasonal processes; (2) slowly-varying internal dynamics; and (3) the slowly-varying response to external changes in radiative forcing. Modes in the intraseasonal component are related to intraseasonal variability in the North Atlantic, North Pacific and North American, and Eurasian regions and are little affected by the larger radiative forcing of the Representative Concentration Pathways 8.5 (RCP8.5) scenario. The leading modes in the slow-internal component are related to the El Niño-Southern Oscillation, Pacific North American or Tropical Northern Hemisphere teleconnection, the North Atlantic Oscillation, and the Western Pacific teleconnection pattern. While the structure of these slow-internal modes is little affected by the larger radiative forcing of the RCP8.5 scenario, their explained variance increases in the warmer climate. The leading mode in the slow-external component has a significant trend and is shown to be related predominantly to the climate change trend in the well mixed greenhouse gas concentration during the historical period. This mode is associated with increasing height in the 500 hPa pressure level. A secondary influence on this mode is the radiative forcing due to stratospheric aerosols associated with volcanic eruptions. The second slow-external mode is shown to be also related to radiative forcing due to stratospheric aerosols. Under RCP8.5 there is only one slow-external mode related to greenhouse gas forcing with a trend over four times the historical trend.

Quality assurance of external exposure measurement for national survey of environmental natural radioactive level

International Nuclear Information System (INIS)

Yue Qingyu

1995-01-01

This paper summarizes the quality assurance work of external exposure measurement for national survey of environmental natural radioactive level. It mainly introduces instrumentation used in external exposure measurement and its properties, the measurement results of three times of national in-site intercomparison, and in-site sample check results of measurement results from 29 provinces, cities and autonomous regions and Wuhan, Baotou cities

Environmental benefits of DSM externalities and resource planning

International Nuclear Information System (INIS)

Tempchin, R.S.; Goldsmith, M.W.

1991-01-01

Recently, political and regulatory initiatives have prompted the expansion of demand-side management (DSM) programs as a means of realizing environmental and economic benefits for both consumers and electric utilities. The Edison Electric Institute sponsored two recent studies to examine the effectiveness of this effort. A national survey of DSM program activity was conducted to determine the resultant air emissions reductions. Due to pervasive inconsistencies in data measurement and reporting, coupled with the number and degree of assumptions necessary to quantify state-by-state energy savings, scientifically verifiable estimates of these emissions reductions could not be developed. The second study, a review of the development and application of monetized environmental externalities, found that the current state regulatory practice of assigned monetary values to the environmental impacts of resource options is based on imcomplete data and applied in an imbalanced manner. Due to the complexity of assessing the direct impact costs of power generation, shadow prices derived from cost conditions have been developed to assign a dollar value per pound of pollutant. These alternative measures of cost, which vary by as much as 300,000 percent from direct impact costs, are applied only to electricity. This singluar focus placed a potential financial disincentive on electricity use, precludes a balanced assessment of all potential fuel choices and excludes any valuation of the considerable environmental and economic benefits of electric technologies

A geographically resolved method to estimate levelized power plant costs with environmental externalities

International Nuclear Information System (INIS)

Rhodes, Joshua D.; King, Carey; Gulen, Gürcan; Olmstead, Sheila M.; Dyer, James S.; Hebner, Robert E.; Beach, Fred C.; Edgar, Thomas F.; Webber, Michael E.

2017-01-01

In this analysis we developed and applied a geographically-resolved method to calculate the Levelized Cost of Electricity (LCOE) of new power plants on a county-by-county basis while including estimates of some environmental externalities. We calculated the LCOE for each county of the contiguous United States for 12 power plant technologies. The minimum LCOE option for each county varies based on local conditions, capital and fuel costs, environmental externalities, and resource availability. We considered ten scenarios that vary input assumptions. We present the results in a map format to facilitate comparisons by fuel, technology, and location. For our reference analysis, which includes a cost of $62/tCO_2 for CO_2 emissions natural gas combined cycle, wind, and nuclear are most often the lowest-LCOE option. While the average cost increases when internalizing the environmental externalities (carbon and air pollutants) is small for some technologies, the local cost differences are as high as $0.62/kWh for coal (under our reference analysis). These results display format, and online tools could serve as an educational tool for stakeholders when considering which technologies might or might not be a good fit for a given locality subject to system integration considerations. - Highlights: • We propose a method to add externalities to LCOE. • We present the least cost technology for every county in the US. • The cheapest technology depends on many characteristics of that locale. • We present online tools for users to change our assumptions. • Our tools are useful in discussing the impact of policy on the cost of electricity.

Externalities of fuel cycles 'ExternE' project. Summary report

International Nuclear Information System (INIS)

Holland, M.; Berry, J.

1994-01-01

There is a growing requirement for policy analysts to take account of the environment in their decision making and to undertake the specified cost-benefit analysis. Within the European Union this is reflected in the 5th Environmental Action Programme, and the Commission's White Paper entitled 'Growth, competitiveness, employment and the ways forward to the 21st century'. This has led to a need for evaluation of environmental externalities. The ExternE Project commenced in 1991 as the European part of a collaborative study between the European Commission and the US Department of Energy. It aims to be the first systematic approach to the evaluation of external costs of a wide range of different fuel cycles. The project will result in an operational accounting framework for the quantification and monetarisation of priority environmental and other externalities. This framework will allow the calculation of the marginal external costs and benefits for specific power plants, at specific sites using specified technologies. There are three major phases in the project. Phase I was undertaken in collaboration with the US Department of Energy. In this phase the teams jointly developed the conceptual approach and methodology and shared scientific information for application to a number of fuel cycles. On the European side work concentrated on the nuclear and coal fuel cycles which together were expected to raise many of the fundamental issues in fuel cycle analysis. The project is currently nearing completion of Phase 2. During this phase the methodology has been applied to a wide range of different fossil, nuclear and renewable fuel cycles for power generation and energy conservation options. Also a series of National Implementation Programmes are underway in which the methodology and accounting framework are being applied to reference sites throughout Europe. In addition the general methodology is being extended to address the evaluation of externalities associated with

Environmental external radiation at some Bulgarian localities

International Nuclear Information System (INIS)

Spurny, F.; Turek, K.; Gelev, M.

2004-01-01

Studies of the environmental radiation background are important from several points of view. First, they permit to estimate the exposure of humans to natural radiation background as a function of different geographical and geophysical parameters. Second, such studies can give also relevant information concerning the consequences of human activities on the presence of ionizing radiation and its sources in the environment. Our both institutions have started since 2000 year common studies in the field of environmental radiation background and its variation with the locality considered. First we have decided to compare the measuring methods used. They were compared on the territory of the Institute of Nuclear Research and Nuclear Energy of the Bulgarian Academy of Sciences (INRNE BAS), particularly in the surroundings of IRT 2000 research reactor. Further, they were compared also at the monitoring station on the territory of INRNE BAS. Finally, the studies were enlarged to the Moussala Observatory of the Institute at Rila Mountains. Several measuring instruments were used to characterize external environmental radiation exposure: Environmental radiation dose rate meter NB 3201 developed in the Czech Republic with a plastic scintillator with small NaI-TL crystal used to compensate the energy dependence to low energy photons; MDU-Liulin semiconductor spectrometer with Si-diode as the sensitive element able to characterize the radiation with both low and high LET; Thermoluminescent detectors (TLD) CaSO 4 :Dy, powder of this TLD material was filled to an Al dose. Results obtained are presented, analysed and discussed. A good agreement of the results obtained was observed, also when compared to the results of other experimental groups. (authors)

Response to a small external force and fluctuations of a passive particle in a one-dimensional diffusive environment

Science.gov (United States)

Huveneers, François

2018-04-01

We investigate the long-time behavior of a passive particle evolving in a one-dimensional diffusive random environment, with diffusion constant D . We consider two cases: (a) The particle is pulled forward by a small external constant force and (b) there is no systematic bias. Theoretical arguments and numerical simulations provide evidence that the particle is eventually trapped by the environment. This is diagnosed in two ways: The asymptotic speed of the particle scales quadratically with the external force as it goes to zero, and the fluctuations scale diffusively in the unbiased environment, up to possible logarithmic corrections in both cases. Moreover, in the large D limit (homogenized regime), we find an important transient region giving rise to other, finite-size scalings, and we describe the crossover to the true asymptotic behavior.

The regulatory instruments for the correction of energy-related environmental externalities

International Nuclear Information System (INIS)

Labanderia Villot, X.; Lopez Otero, X.; Rodriguez Mendez, M.

2007-01-01

In this paper we deal with the different regulatory instruments for the correction of energy-related environmental externalities. This objective is justified by the size and general occurrence of this type of externalities in contemporary societies. In this sense, we distinguish between three main generations of instruments: conventional regulations, market mechanisms and voluntary approaches. In all cases, some practical examples of their application are presented, albeit emphasizing the experience with the so-called market instruments and the results of hypothetical simulations for the Spanish case. As a general conclusion we underline the role of economic analysis in the design, choice and evaluation of those mechanisms, which also explains the structure and contents of the article. (Author)

Complex dynamics in Duffing system with two external forcings

International Nuclear Information System (INIS)

Jing Zhujun; Wang Ruiqi

2005-01-01

Duffing's equation with two external forcing terms have been discussed. The threshold values of chaotic motion under the periodic and quasi-periodic perturbations are obtained by using second-order averaging method and Melnikov's method. Numerical simulations not only show the consistence with the theoretical analysis but also exhibit the interesting bifurcation diagrams and the more new complex dynamical behaviors, including period-n (n=2,3,6,8) orbits, cascades of period-doubling and reverse period doubling bifurcations, quasi-periodic orbit, period windows, bubble from period-one to period-two, onset of chaos, hopping behavior of chaos, transient chaos, chaotic attractors and strange non-chaotic attractor, crisis which depends on the frequencies, amplitudes and damping. In particular, the second frequency plays a very important role for dynamics of the system, and the system can leave chaotic region to periodic motions by adjusting some parameter which can be considered as an control strategy of chaos. The computation of Lyapunov exponents confirm the dynamical behaviors

Approaches in estimation of external cost for fuel cycles in the ExternE project

International Nuclear Information System (INIS)

Afanas'ev, A.A.; Maksimenko, B.N.

1998-01-01

The purposes, content and main results of studies realized within the frameworks of the International Project ExternE which is the first comprehensive attempt to develop general approach to estimation of external cost for different fuel cycles based on utilization of nuclear and fossil fuels, as well as on renewable power sources are discussed. The external cost of a fuel cycle is treated as social and environmental expenditures which are not taken into account by energy producers and consumers, i.e. these are expenditures not included into commercial cost nowadays. The conclusion on applicability of the approach suggested for estimation of population health hazards and environmental impacts connected with electric power generation growth (expressed in money or some other form) is made

A complex social-ecological disaster: Environmentally induced forced migration.

Science.gov (United States)

Rechkemmer, Andreas; O'Connor, Ashley; Rai, Abha; Decker Sparks, Jessica L; Mudliar, Pranietha; Shultz, James M

2016-01-01

In the 21 st century, global issues are increasingly characterized by inter-connectedness and complexity. Global environmental change, and climate change in particular, has become a powerful driver and catalyst of forced migration and internal displacement of people. Environmental migrants may far outnumber any other group of displaced people and refugees in the years to come. Deeper scientific integration, especially across the social sciences, is a prerequisite to tackle this issue.

Driving forces behind the Chinese public's demand for improved environmental safety.

Science.gov (United States)

Wen, Ting; Wang, Jigan; Ma, Zongwei; Bi, Jun

2017-12-15

Over the past decades, the public demand for improved environmental safety keeps increasing in China. This study aims to assess the driving forces behind the increasing public demand for improved environmental safety using a provincial and multi-year (1995, 2000, 2005, 2010, and 2014) panel data and the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT) model. The potential driving forces investigated included population size, income levels, degrees of urbanization, and educational levels. Results show that population size and educational level are positively (Pdemand for improved environmental safety. No significant impact on demand was found due to the degree of urbanization. For the impact due to income level, an inverted U-shaped curve effect with the turning point of ~140,000 CNY GDP per capita is indicated. Since per capita GDP of 2015 in China was approximately 50,000 CNY and far from the turning point, the public demand for improved environmental safety will continue rising in the near future. To meet the increasing public demand for improved environmental safety, proactive and risk prevention based environmental management systems coupled with effective environmental risk communication should be established. Copyright © 2017 Elsevier B.V. All rights reserved.

Applying environmental externalities to US Clean Coal Technologies for Asia

International Nuclear Information System (INIS)

Szpunar, C.B.; Gillette, J.L.

1993-01-01

The United States is well positioned to play an expanding role in meeting the energy technology demands of the Asian Pacific Basin, including Indonesia, Thailand, and the Republic of China (ROC-Taiwan). The US Department of Energy Clean Coal Technology (CCT) Demonstration Program provides a proving ground for innovative coal-related technologies that can be applied domestically and abroad. These innovative US CCTs are expected to satisfy increasingly stringent environmental requirements while substantially improving power generation efficiencies. They should also provide distinct advantages over conventional pulverized coal-fired combustors. Finally, they are expected to be competitive with other energy options currently being considered in the region. This paper presents potential technology scenarios for Indonesia, Thailand, and the ROC-Taiwan and considers an environmental cost-benefit approach employing a newly developed method of applying environmental externalities. Results suggest that the economic benefits from increased emission control can indeed be quantified and used in cost-benefit comparisons, and that US CCTs can be very cost effective in reducing emissions

Environmental care in the gas business

Energy Technology Data Exchange (ETDEWEB)

Beukema, K.; Shephard, F. [eds.

1997-10-01

This report outlines the activities of the Environment Task Force and current environmental issues. The report was built around the framework of the IGU Environmental Charter, developed by the Task Force and approved by the IGU Council. Good environmental management is an essential element of successful business. Gas companies are seeking ways to express this commitment. The Task Force considered a number of policy areas which have not yet been fully resolved. They include the application of total life cycle analysis, methodologies for calculating and integrating externalities, the concept of environmental risk and how it matches perception and the issue of environmental liability. Recent developments in formal systems to manage these issues are reported on. The report discusses approaches to assessing environmental performance and the relevance of natural gas emissions. Environmental studies undertaken by the Technical Committees are highlighted. Examples of voluntary commitments relating to the issue of climate change are given and progress in the scientific and political debate is reviewed. The report indicates some potential areas for future study. (au) 100 refs.

Environmental care in the gas business

International Nuclear Information System (INIS)

Beukema, K.; Shephard, F.

1997-01-01

This report outlines the activities of the Environment Task Force and current environmental issues. The report was built around the framework of the IGU Environmental Charter, developed by the Task Force and approved by the IGU Council. Good environmental management is an essential element of successful business. Gas companies are seeking ways to express this commitment. The Task Force considered a number of policy areas which have not yet been fully resolved. They include the application of total life cycle analysis, methodologies for calculating and integrating externalities, the concept of environmental risk and how it matches perception and the issue of environmental liability. Recent developments in formal systems to manage these issues are reported on. The report discusses approaches to assessing environmental performance and the relevance of natural gas emissions. Environmental studies undertaken by the Technical Committees are highlighted. Examples of voluntary commitments relating to the issue of climate change are given and progress in the scientific and political debate is reviewed. The report indicates some potential areas for future study. (au) 100 refs

Environmental Management Competitive Pressure Effect on SME Environmental Innovation Activities: A Green Supply Chain Perspective

Science.gov (United States)

Rashid, A. A.; Sidek, A. A.; Suffian, S. A.; Daud, M. R. C.

2018-01-01

The idea of assimilating green supply chain is to integrate and establish environmental management into the supply chain practices. The study aims to explore how environmental management competitive pressure influences a SME company in Malaysia to incorporate green supply chain integration, which is an efficient platform to develop environmental innovation. This study further advances green supply chain management research in Malaysia by using the method of quantitative analysis to analyze the model developed which data will be collected based on a sample of SMEs in Malaysia in manufacturing sector. The model developed in this study illustrates how environmental management competitive pressure from main competitors affects three fundamental dimensions of green supply chain integration. The research findings suggest that environmental management competitive pressure is a vital driving force for a SME company to incorporate internal and external collaboration in developing green product innovation. From the analysis conducted, the study strongly demonstrated that the best way for a company to counteract competitor’s environmental management success is to first implement strong internal green product development process then move to incorporate external environmental management innovation between their suppliers and customers. The findings also show that internal integration of green product innovation fully mediates the relationship of environmental management competitive pressure and the external integration of green product innovation.

Public Health and Mental Health Implications of Environmentally Induced Forced Migration.

Science.gov (United States)

Shultz, James M; Rechkemmer, Andreas; Rai, Abha; McManus, Katherine T

2018-03-28

ABSTRACTClimate change is increasingly forcing population displacement, better described by the phrase environmentally induced forced migration. Rising global temperatures, rising sea levels, increasing frequency and severity of natural disasters, and progressive depletion of life-sustaining resources are among the drivers that stimulate population mobility. Projections forecast that current trends will rapidly accelerate. This will lead to an estimated 200 million climate migrants by the year 2050 and create dangerous tipping points for public health and security.Among the public health consequences of climate change, environmentally induced forced migration is one of the harshest and most harmful outcomes, always involving a multiplicity of profound resource and social losses and frequently exposing migrants to trauma and violence. Therefore, one particular aspect of forced migration, the effects of population displacement on mental health and psychosocial functioning, deserves dedicated focus. Multiple case examples are provided to elucidate this theme. (Disaster Med Public Health Preparedness. 2018;page 1 of 7).

Conference-EC-US Task Force Joint US-EU Workshop on Metabolomics and Environmental Biotechnology

Energy Technology Data Exchange (ETDEWEB)

PI: Lily Y. Young

2009-06-04

Since 1990, the EC-US Task Force on Biotechnology Research has been coordinating transatlantic efforts to guide and exploit the ongoing revolution in biotechnology and the life sciences. The Task Force was established in June 1990 by the European Commission and the White House Office of Science and Technology Policy. The Task Force has acted as an effective forum for discussion, coordination, and development of new ideas for the last 18 years. Task Force members are European Commission and US Government science and technology administrators who meet annually to enhance communication across the Atlantic, and to encourage collaborative research. Through sponsoring workshops, and other activities, the Task Force also brings together scientific leaders and early career researchers from both sides of the Atlantic to forecast research challenges and opportunities and to promote better links between researchers. Over the years, by keeping a focus on the future of science, the Task Force has played a key role in establishing a diverse range of emerging scientific fields, including biodiversity research, neuroinformatics, genomics, nanobiotechnology, neonatal immunology, transkingdom molecular biology, biologically-based fuels, and environmental biotechnology. The EC-US Task Force has sponsored a number of Working Groups on topics of mutual transatlantic interest. The idea to create a Working Group on Environmental Biotechnology research was discussed in the Task Force meeting of October 1993. The EC-US Working Group on Environmental Biotechnology set as its mission 'To train the next generation of leaders in environmental biotechnology in the United States and the European Union to work collaboratively across the Atlantic.' Since 1995, the Working Group supported three kinds of activities, all of which focus one early career scientists: (1) Workshops on the use of molecular methods and genomics in environmental biotechnology; (2) Short courses with theoretical

ExternE: Externalities of energy Vol. 4. Oil and gas

International Nuclear Information System (INIS)

Friedrich, R.; Krewitt, W.; Mayerhofer, P.

1995-01-01

Awareness of the environmental damage resulting from human activity, particularly commencing energy use, has grown greatly in recent years. Effects such as global warming, ozone depletion and acid rain are now the subjects of much research and public debate. It is now known that these and other effects damage a wide range of receptors, including human health, forests, crops, freshwater ecosystems and buildings. Such damages are typically not accounted for by the producers and consumers of the good in question (in this case energy). They are thus referred to as 'external costs' or 'externalities', to distinguish them from the private costs which account for the construction of plant, cost of fuel, wages, etc. In recent years there has been a growing interest in the assessment of the environmental and health impacts of energy, and the related external costs. This concern is driven by a number of different factors: the need to integrate environmental concerns in decision making over the choice between different fuels and energy technologies; the need to evaluate the costs and benefits of stricter environmental standards; increased attention to the use of economic instruments for environmental policy, the need to develop overall indicators of environmental performance of different technologies; major changes in the energy sector, including privatisation, liberalisation of markets, reduction of subsidies, etc. An agreed methodology for calculation and integration of external costs has not been established. Earlier work is typically of a preliminary nature and tends to be deficient with respect to both the methods employed and the quality of models and data used. In consequence of this a collaborative project, the EC/US Fuel Cycles Study, was established between Directorate General XLI (Science, Research and Technology) of the European Commission and the United States Department of Energy. This ran for the period 1991 to 1993, and good agreement on a variety of

Externalities - an analysis using the EU ExternE-results

International Nuclear Information System (INIS)

2003-10-01

The EU project ExternE quantified the externalities for the different energy technologies. In this work, the ExternE results are used in a MARKAL-analysis for the Nordic countries. The analysis does not go into detail, but gives some interesting indications: The external costs are not fully covered in the Nordic energy systems, the present taxes and charges are not high enough. The emissions from the energy systems would be strongly reduced, if taxes/environmental charges were set at the level ExternE calculate. The emissions from power production would be reduced most. Renewable energy sources and natural gas dominate the energy systems in the ExternE case

External Load Affects Ground Reaction Force Parameters Non-uniformly during Running in Weightlessness

Science.gov (United States)

DeWitt, John; Schaffner, Grant; Laughlin, Mitzi; Loehr, James; Hagan, R. Donald

2004-01-01

Long-term exposure to microgravity induces detrimefits to the musculcskdetal system (Schneider et al., 1995; LeBlanc et al., 2000). Treadmill exercise is used onboard the International Space Station as an exercise countermeasure to musculoskeletal deconditioning due to spaceflight. During locomotive exercise in weightlessness (0G), crewmembers wear a harness attached to an external loading mechanism (EL). The EL pulls the crewmember toward the treadmill, and provides resistive load during the impact and propulsive phases of gait. The resulting forces may be important in stimulating bone maintenance (Turner, 1998). The EL can be applied via a bungee and carabineer clip configuration attached to the harness and can be manipulated to create varying amounts of load levels during exercise. Ground-based research performed using a vertically mounted treadmill found that peak ground reaction forces (GRF) during running at an EL of less than one body weight (BW) are less than those that occur during running in normal gravity (1G) (Davis et al., 1996). However, it is not known how the GRF are affected by the EL in a true OG environment. Locomotion while suspended may result in biomechanics that differ from free running. The purpose of this investigation was to determine how EL affects peak impact force, peak propulsive force, loading rate, and impulse of the GRF during running in 0G. It was hypothesized that increasing EL would result in increases in each GRF parameter.

Multipoles and Force on External Points for a Two-layered Spheroidal Liquid Mass Rotating Differentialy

Energy Technology Data Exchange (ETDEWEB)

Cisneros-Parra, Joel U. [Facultad de Ciencias, UASLP, Zona Universitaria, San Luis Potosi, S,L,P, 78290 (Mexico); Martinez-Herrera, Francisco J.; Montalvo-Castro, J. Daniel [Instituto de Fisica, UASLP, Zona Universitaria, San Luis Potosi, S,L,P, 78290 (Mexico)

2017-10-20

We recently reported on a series of equilibrium figures for a self-gravitating heterogeneous liquid body, consisting of two concentric distorted spheroids, “nucleus” and “atmosphere,” each endowed with its own internal motion of differential rotation. In our current work, we calculate the body’s force at external points and obtain a multipolar expansion of the potential. We also give an account of figures with prolate nuclei, which remained unnoticed by us in our former paper.

Multipoles and Force on External Points for a Two-layered Spheroidal Liquid Mass Rotating Differentialy

International Nuclear Information System (INIS)

Cisneros-Parra, Joel U.; Martinez-Herrera, Francisco J.; Montalvo-Castro, J. Daniel

2017-01-01

We recently reported on a series of equilibrium figures for a self-gravitating heterogeneous liquid body, consisting of two concentric distorted spheroids, “nucleus” and “atmosphere,” each endowed with its own internal motion of differential rotation. In our current work, we calculate the body’s force at external points and obtain a multipolar expansion of the potential. We also give an account of figures with prolate nuclei, which remained unnoticed by us in our former paper.

Moessbauer study of the fast magnetization reversal forced in permalloy and invar by an external rf magnetic field

International Nuclear Information System (INIS)

Kopcewicz, M.

1978-01-01

The effect of fast magnetization reversal leading to fast relaxation of the hyperfine field (collapse effect) forced by an external rf magnetic field is studied using the Moessbauer technique for permalloy and invar. The rf collapse and sideband effects are investigated as a function of external rf field, frequency, and intensity. The collapse of the hfs spectrum through unresolved hfs spectrum, triangular shape to a single line, as well as the formation of sidebands is observed. The rf collapse effect is attributed to the rf forced uniform rotation of internal magnetization which causes fast magnetization reversal leading to fast relaxation of the hyperfine field as a result of which the average field at the Moessbauer nuclei is reduced to zero. The difference of the magnetization reversal process in permalloy and invar are discussed. It is shown that the origin of collapse and sideband effects is totaly different: the collapse effect being of purely magnetic origin while the formation of sidebands is due to the rf induced mechanical vibrations of iron atoms within the sample. It is possible to damp sidebands without affecting the collapse effect. The results obtained show that the application of the rf field to ferromagnetic materials gives a unique possibility to force, simulate, and control the relaxation effects in ferromagnetic materials. (author)

Entropic transport without external force in confined channel with oscillatory boundary

Energy Technology Data Exchange (ETDEWEB)

Ding, Huai; Jiang, Huijun; Hou, Zhonghuai, E-mail: hzhlj@ustc.edu.cn [Department of Chemical Physics & Hefei National Laboratory for Physical Sciences at Microscales, University of Science and Technology of China, Hefei, Anhui 230026 (China)

2015-12-28

The dynamics of point-like Brownian particles in a periodic confined channel with oscillating boundaries has been studied. Directional transport (DT) behavior, characterized by net displacement along the horizontal direction, is observed even without external force which is necessary for the conventional DT where the boundaries are static. For typical parameter values, the average velocity V{sub t} of DT reaches a maximum with the variation of the noise intensity D, being alike to the phenomenon of stochastic resonance. Interestingly, we find that V{sub t} shows nontrivial dependences on the particle gravity G depending on the noise level. When the noise is large, V{sub t} increases monotonically with G indicating that heavier particle moves faster, while for small noise, V{sub t} shows a bell-shape dependence on G, suggesting that a particle with an intermediate weight may move the fastest. Such results were not observed for DT in a channel with static boundaries. To understand these findings, we have adopted an effective one-dimensional coarsening description, which facilitates us to introduce an effective entropic force along the horizontal direction. The average force is apparently nonzero due to the oscillatory boundary, hence leading to the net transport, and it shows similar dependences as V{sub t} on the noise intensity D and particle gravity G. The dependences of the DT behavior on other parameters describing the oscillatory channel have also been investigated, showing that DT is more pronounced for larger oscillation amplitude and frequency, and asymmetric geometry within a channel period and phase difference between neighboring periods are both necessary for the occurrence of DT.

Final Environmental Assessment for the Runway Extension and New Parking Apron at Tyndall Air Force Base, Florida

National Research Council Canada - National Science Library

2004-01-01

The Air Force prepared an Environmental Assessment (EA) of the potential environmental consequences of constructing a new heavy parking apron and runway extension at Tyndall Air Force Base (AFB), Florida...

Energy tax harmonization in the European Union: a proposal based on the internalization of environmental external costs

International Nuclear Information System (INIS)

Dorigoni, S.; Gulli, F.

2002-01-01

Energy tax harmonization is a crucial step towards the creation of a single market. In this article the possibility of achieving such an objective is discussed. The paper consists of two sections. In the first the European taxation on energy products is analysed. This analysis is useful in showing the differences that exist between the European countries that account for the difficulties met so far in the process of harmonization. In this respect we comment on the recent proposal of the Directive of the European Union, which lays down the obligation of minimum levels of taxation in all European member states. In the second section, after simulating the effects related to the adoption of a common environmental taxation (a first best solution based on the internalization of environmental external costs), we propose, as a second best solution, an excise tax harmonization model taking into consideration the specificity of each country and being, as far as possible, coherent with the environmental objective. This model proposes: the introduction of a minimum level of taxation on all products equal to the external cost due to the greenhouse effect (a common carbon tax); the possibility, given to the member states, of deviating from such minimum levels, in accordance with their specific requirements, internalizing in the price of the different products, by means of taxes additional to that CO 2 minimum, the external costs associated with other pollutant agents (the same in all countries); the opportunity, in case it should be necessary to exceed the entire external cost, for the member states to apply increases that are in accordance with the environmental objective. (author)

Environmental Assessment for the Warren Station externally fired combined cycle demonstration project

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

The proposed Penelec project is one of 5 projects for potential funding under the fifth solicitation under the Clean Coal Technology program. In Penelec, two existing boilers would be replaced at Warren Station, PA; the new unit would produce 73 MW(e) in a combined cycle mode (using both gas-fired and steam turbines). The project would fill the need for a full utility-size demonstration of externally fire combined cycle (EFCC) technology as the next step toward commercialization. This environmental assessment was prepared for compliance with NEPA; its purpose is to provide sufficient basis for determining whether to prepare an environmental impact statement or to issue a finding of no significant impact. It is divided into the sections: purpose and need for proposed action; alternatives; brief description of affected environment; environmental consequences, including discussion of commercial operation beyond the demonstration period.

Weighing environmental externalities: How to do it right

International Nuclear Information System (INIS)

Freeman, A.M. III; Burtraw, D.; Harrington, W.; Krupnick, A.J.

1992-01-01

In this paper, the authors focus on the procedure of incorporating monetary measures of external damages as address to private bids and ranking alternatives on the basis of their social costs. They assume that it will be possible to develop methods and models to calculate environmental damages for specific electricity supply options. They reject the use of marginal control cost as a proxy for marginal damages. The question they address here is whether the marginal damage from an increase in electricity supply is the correct adjustment or adder to private cost for least-cost utility planning. They show that arriving at the correct adder depends on both the form that the existing environmental regulations take - that is, whether pollution is controlled by taxation, tradable emissions permits, or direct regulation - and, in the case of an emissions tax, whether the degree of control of pollution is optimal, too strict, or not strict enough according to the criterion of economic efficiency. They make explicit the circumstances under which the correct adder will be equal to marginal damages, will be some other positive number, or zero, or even negative. If emissions reductions are achieved by direct regulation or command and control policies (CAC), then the correct adder is always just equal to marginal damages

External forcing as a metronome for Atlantic multidecadal variability

Science.gov (United States)

Otterå, Odd Helge; Bentsen, Mats; Drange, Helge; Suo, Lingling

2010-10-01

Instrumental records, proxy data and climate modelling show that multidecadal variability is a dominant feature of North Atlantic sea-surface temperature variations, with potential impacts on regional climate. To understand the observed variability and to gauge any potential for climate predictions it is essential to identify the physical mechanisms that lead to this variability, and to explore the spatial and temporal characteristics of multidecadal variability modes. Here we use a coupled ocean-atmosphere general circulation model to show that the phasing of the multidecadal fluctuations in the North Atlantic during the past 600 years is, to a large degree, governed by changes in the external solar and volcanic forcings. We find that volcanoes play a particularly important part in the phasing of the multidecadal variability through their direct influence on tropical sea-surface temperatures, on the leading mode of northern-hemisphere atmosphere circulation and on the Atlantic thermohaline circulation. We suggest that the implications of our findings for decadal climate prediction are twofold: because volcanic eruptions cannot be predicted a decade in advance, longer-term climate predictability may prove challenging, whereas the systematic post-eruption changes in ocean and atmosphere may hold promise for shorter-term climate prediction.

Environmental Forcing of Supertyphoon Paka's (1997) Latent Heat Structure.

Science.gov (United States)

Rodgers, Edward; Olson, William; Halverson, Jeff; Simpson, Joanne; Pierce, Harold

2000-12-01

Paka's convective burst. However, the horizontal moisture flux convergence values in the outer core were weaker than some of the previously examined tropical cyclones. Also, the upper-tropospheric outflow generation of eddy relative angular momentum flux convergence was much less than that found during moderate tropical cyclone-trough interaction. These results indicated how important the external necessary condition and the internal forcing (i.e., convective rainband cycle) were in generating Paka's convective bursts as compared with the external sufficient forcing mechanisms found in higher-latitude tropical cyclones. Later, as Paka began to interact with the westerlies, both the necessary (i.e., strong vertical wind shear and colder SSTs) and sufficient (i.e., dry air intrusion) external forcing mechanisms helped to decrease Paka's rain rate.

Perceived environmental uncertainty in Dutch dairy farming: The effect of external farm context on strategic choice

NARCIS (Netherlands)

Ondersteijn, C.J.M.; Giesen, G.W.J.; Huirne, R.B.M.

2006-01-01

This paper explores the way in which dairy farmers perceive their environment (PE), i.e., the external context of their farm, and the uncertainty (PEU) this poses to them. The environment is defined using the STEP concept (society, technology, economy and politics) and Porter¿s five forces model.

Managing search strategies for open innovation : the role of environmental munificence as well as internal and external R&D

OpenAIRE

Sofka, Wolfgang; Grimpe, Christoph

2008-01-01

Firms compete increasingly in an open innovation environment. Search strategies for external knowledge become therefore crucial for firm success. Existing research differentiates between the breadth (diversity) and depth (intensity) with which firms pursue external knowledge source. A consensus exists that resource constrains force firms to balance both dimensions. However, relatively little is known on how managers can selectively strengthen one of these dimensions. We argue conceptually tha...

Quantifying the Sensitivity of the Production of Environmental Externalities to Market-Based Interventions in the Power Sector

Science.gov (United States)

Peer, R.; Sanders, K.

2017-12-01

The optimization function that governs the dispatching of power generators to meet electricity demand minimizes the marginal cost of electricity generation without regard to the environmental or public health damages caused by power production. Although technologies exist for reducing the externalities resulting from electricity generation at power plants, current solutions typically raise the cost of power production or introduce operational challenges for the grid. This research quantifies the trade-offs and couplings between the cooling water, greenhouse gas emissions, and air quality impacts of different power generating technologies under business as usual market conditions, as well as a series of market-based interventions aimed to reduce the production of those externalities. Using publicly available data from the US Environmental Protection Agency (EPA) and the US Energy Information Administration (EIA) for power plant water use and emissions, a unit commitment and dispatch power market simulation model is modified to evaluate the production of environmental externalities from power production. Scenarios are developed to apply a set of fees for cooling water, carbon dioxide, nitrous oxide and sulfur oxide emissions, respectively. Trade-offs between environmental performance, overall generation costs, and shifts in the power plants dispatched to meet demand are quantified for each power market simulation. The results from this study will provide insight into the development of a novel market-based framework that modifies the optimization algorithms governing the dispatching of electricity onto the grid in efforts to achieve cost-effective improvements in its environmental performance without the need for new infrastructure investments.

Incorporating environmental externalities into the capacity expansion planning: An Israeli case study

International Nuclear Information System (INIS)

Becker, Nir; Soloveitchik, David; Olshansky, Moshe

2011-01-01

Highlights: → Long term energy-environmental planning problems for the electricity sector. → Environmental considerations in the capacity expansion plan. → Modified version of WASP-IV as a multiple objective programming model. → Multi-objective analysis of trade-offs between costs and pollutants reduction. -- Abstract: In this paper we use the WASP-IV model and develop methodology to estimate the impact of several environmental externality costs on the electricity sector development plan. For this purpose, 22 cases were generated which were later on reduced to only seven non-dominated cases by considering this problem as a dynamic multiple objective programming model. The major impact of internalizing the external cost is on fuel use. In the electricity generation system more natural gas and less coal has been used. A cost benefit analysis (CBA) of three scenarios has been performed focusing on taxing only one pollutant while looking at its overall implication. The benefit cost ratio was about 4.5 while the net benefit was about 200 million USD (depending on the scenario). Multi-objective analysis among the different scenarios was carried in a dynamic setting. Seven scenarios appear in the non-dominated set. Out of them five appears in every year and those should have a higher weight placed on them by policy makers. Out of those five, two are a single tax on one pollutant. Thus, policy makers might want to consider a mixture of taxes but for the sake of simplicity can also use a simple one tax on a given pollutant.

Externality or sustainability economics?

International Nuclear Information System (INIS)

Bergh, Jeroen C.J.M. van den

2010-01-01

In an effort to develop 'sustainability economics' Baumgaertner and Quaas (2010) neglect the central concept of environmental economics-'environmental externality'. This note proposes a possible connection between the concepts of environmental externality and sustainability. In addition, attention is asked for other aspects of 'sustainability economics', namely the distinction weak/strong sustainability, spatial sustainability and sustainable trade, distinctive sustainability policy, and the ideas of early 'sustainability economists'. I argue that both sustainability and externalities reflect a systems perspective and propose that effective sustainability solutions require that more attention is given to system feedbacks, notably other-regarding preferences and social interactions, and energy and environmental rebound. The case of climate change and policy is used to illustrate particular statements. As a conclusion, a list of 20 insights and suggestions for research is offered. (author)

Tropically driven and externally forced patterns of Antarctic sea ice change: reconciling observed and modeled trends

Science.gov (United States)

Schneider, David P.; Deser, Clara

2017-09-01

Recent work suggests that natural variability has played a significant role in the increase of Antarctic sea ice extent during 1979-2013. The ice extent has responded strongly to atmospheric circulation changes, including a deepened Amundsen Sea Low (ASL), which in part has been driven by tropical variability. Nonetheless, this increase has occurred in the context of externally forced climate change, and it has been difficult to reconcile observed and modeled Antarctic sea ice trends. To understand observed-model disparities, this work defines the internally driven and radiatively forced patterns of Antarctic sea ice change and exposes potential model biases using results from two sets of historical experiments of a coupled climate model compared with observations. One ensemble is constrained only by external factors such as greenhouse gases and stratospheric ozone, while the other explicitly accounts for the influence of tropical variability by specifying observed SST anomalies in the eastern tropical Pacific. The latter experiment reproduces the deepening of the ASL, which drives an increase in regional ice extent due to enhanced ice motion and sea surface cooling. However, the overall sea ice trend in every ensemble member of both experiments is characterized by ice loss and is dominated by the forced pattern, as given by the ensemble-mean of the first experiment. This pervasive ice loss is associated with a strong warming of the ocean mixed layer, suggesting that the ocean model does not locally store or export anomalous heat efficiently enough to maintain a surface environment conducive to sea ice expansion. The pervasive upper-ocean warming, not seen in observations, likely reflects ocean mean-state biases.

Tropically driven and externally forced patterns of Antarctic sea ice change: reconciling observed and modeled trends

Science.gov (United States)

Schneider, David P.; Deser, Clara

2018-06-01

Recent work suggests that natural variability has played a significant role in the increase of Antarctic sea ice extent during 1979-2013. The ice extent has responded strongly to atmospheric circulation changes, including a deepened Amundsen Sea Low (ASL), which in part has been driven by tropical variability. Nonetheless, this increase has occurred in the context of externally forced climate change, and it has been difficult to reconcile observed and modeled Antarctic sea ice trends. To understand observed-model disparities, this work defines the internally driven and radiatively forced patterns of Antarctic sea ice change and exposes potential model biases using results from two sets of historical experiments of a coupled climate model compared with observations. One ensemble is constrained only by external factors such as greenhouse gases and stratospheric ozone, while the other explicitly accounts for the influence of tropical variability by specifying observed SST anomalies in the eastern tropical Pacific. The latter experiment reproduces the deepening of the ASL, which drives an increase in regional ice extent due to enhanced ice motion and sea surface cooling. However, the overall sea ice trend in every ensemble member of both experiments is characterized by ice loss and is dominated by the forced pattern, as given by the ensemble-mean of the first experiment. This pervasive ice loss is associated with a strong warming of the ocean mixed layer, suggesting that the ocean model does not locally store or export anomalous heat efficiently enough to maintain a surface environment conducive to sea ice expansion. The pervasive upper-ocean warming, not seen in observations, likely reflects ocean mean-state biases.

Persistent fluctuations in synchronization rate in globally coupled oscillators with periodic external forcing

Science.gov (United States)

Atsumi, Yu; Nakao, Hiroya

2012-05-01

A system of phase oscillators with repulsive global coupling and periodic external forcing undergoing asynchronous rotation is considered. The synchronization rate of the system can exhibit persistent fluctuations depending on parameters and initial phase distributions, and the amplitude of the fluctuations scales with the system size for uniformly random initial phase distributions. Using the Watanabe-Strogatz transformation that reduces the original system to low-dimensional macroscopic equations, we show that the fluctuations are collective dynamics of the system corresponding to low-dimensional trajectories of the reduced equations. It is argued that the amplitude of the fluctuations is determined by the inhomogeneity of the initial phase distribution, resulting in system-size scaling for the random case.

Update of the external cost for environmental damage (for Flanders) with regard to air pollution and climatic change; Actualisering van de externe milieuschadekosten (algemeen voor Vlaanderen) met betrekking tot luchtverontreiniging en klimaatverandering

Energy Technology Data Exchange (ETDEWEB)

De Nocker, L.; Michiels, H.; Deutsch, F.; Lefebvre, W.; Buekers, J.; Torfs, R. [Unit Ruimtelijke Milieuaspecten, VITO, Mol (Belgium)

2010-12-15

This report contains a set of indicators for calculating external costs of air-polluting substances and greenhouse gases. The external costs of environmental damage relate to the damage to human health, eco systems, buildings and economy as a result of an activity. This leads to loss of welfare for inhabitants in Flanders and abroad for the current and future generations. The magnitude and evolution of the external or environmental damage cost resulting from air pollution is one of the indicators for the MIRA report that translates the state of the environment into consequences for man and economy. [Dutch] Dit rapport bevat een set van kengetallen voor de berekening van de externe kosten van luchtverontreinigende stoffen en broeikasgassen. De externe kosten of milieuschadekosten hebben betrekking op de schade aan menselijke gezondheid, ecosystemen, gebouwen en economie als gevolg van een activiteit. Dit leidt tot een verlies aan welvaart voor inwoners in Vlaanderen en het buitenland, voor deze en toekomstige generaties. De omvang en evolutie van de externe of milieuschadekosten ten gevolge van luchtverontreiniging ia 1 van de indicatoren voor het MIRA rapport die de toestand van het milieu vertaalt naar gevolgen voor mens en economie.

Morphological changes in textile fibres exposed to environmental stresses: atomic force microscopic examination.

Science.gov (United States)

Canetta, Elisabetta; Montiel, Kimberley; Adya, Ashok K

2009-10-30

The ability of the atomic force microscope (AFM) to investigate the nanoscopic morphological changes in the surfaces of fabrics was examined for the first time. This study focussed on two natural (cotton and wool), and a regenerated cellulose (viscose) textile fibres exposed to various environmental stresses for different lengths of times. Analyses of the AFM images allowed us to measure quantitatively the surface texture parameters of the environmentally stressed fabrics as a function of the exposure time. It was also possible to visualise at the nanoscale the finest details of the surfaces of three weathered fabrics and clearly distinguish between the detrimental effects of the imposed environmental conditions. This study confirmed that the AFM could become a very powerful tool in forensic examination of textile fibres to provide significant fibre evidence due to its capability of distinguishing between different environmental exposures or forced damages to fibres.

Force sharing and other collaborative strategies in a dyadic force perception task.

Science.gov (United States)

Tatti, Fabio; Baud-Bovy, Gabriel

2018-01-01

When several persons perform a physical task jointly, such as transporting an object together, the interaction force that each person experiences is the sum of the forces applied by all other persons on the same object. Therefore, there is a fundamental ambiguity about the origin of the force that each person experiences. This study investigated the ability of a dyad (two persons) to identify the direction of a small force produced by a haptic device and applied to a jointly held object. In this particular task, the dyad might split the force produced by the haptic device (the external force) in an infinite number of ways, depending on how the two partners interacted physically. A major objective of this study was to understand how the two partners coordinated their action to perceive the direction of the third force that was applied to the jointly held object. This study included a condition where each participant responded independently and another one where the two participants had to agree upon a single negotiated response. The results showed a broad range of behaviors. In general, the external force was not split in a way that would maximize the joint performance. In fact, the external force was often split very unequally, leaving one person without information about the external force. However, the performance was better than expected in this case, which led to the discovery of an unanticipated strategy whereby the person who took all the force transmitted this information to the partner by moving the jointly held object. When the dyad could negotiate the response, we found that the participant with less force information tended to switch his or her response more often.

State plans to force companies to eliminate environmental burdens

International Nuclear Information System (INIS)

Marcan, P.

2004-01-01

The Ministry of Environment is preparing legislation aimed at forcing the state and especially private enterprises to map and eliminate tips, refuse from company premises and farmyards, and manure heaps. It is expected that the main burden will fall on private enterprises. The department is still working on the wording of this new Act on environmental burdens and so it is not yet clear whether it will be of assistance in the elimination of environmental burdens. The Ministry is aware that economic aspects must also be taken into account when exercising pressure on the companies. Closing down a company that cannot meet environmental criteria would result in redundancies and so the time schedule for the elimination of environmental burdens will be adjusted to fit the financial situation of the company involved. The ministry plans to first find companies responsible for environmental debts and then set a deadline for the preparation of a project to eliminate the environmental burden. The project would have to contain a description of elimination methods, in addition to a time schedule and cost assessment. If a private company does not report an environmental burden, the competent public authority will have the power to request access to the premises to undertake an inspection. (author)

Force majeure: Will climate change affect our ability to attain Good Environmental Status for marine biodiversity?

Science.gov (United States)

Elliott, Michael; Borja, Ángel; McQuatters-Gollop, Abigail; Mazik, Krysia; Birchenough, Silvana; Andersen, Jesper H; Painting, Suzanne; Peck, Myron

2015-06-15

The EU Marine Strategy Framework Directive (MSFD) requires that Good Environmental Status (GEnS), is achieved for European seas by 2020. These may deviate from GEnS, its 11 Descriptors, targets and baselines, due to endogenic managed pressures (from activities within an area) and externally due to exogenic unmanaged pressures (e.g. climate change). Conceptual models detail the likely or perceived changes expected on marine biodiversity and GEnS Descriptors in the light of climate change. We emphasise that marine management has to accommodate 'shifting baselines' caused by climate change particularly during GEnS monitoring, assessment and management and 'unbounded boundaries' given the migration and dispersal of highly-mobile species. We suggest climate change may prevent GEnS being met, but Member States may rebut legal challenges by claiming that this is outside its control, force majeure or due to 'natural causes' (Article 14 of the MSFD). The analysis is relevant to management of other global seas. Copyright © 2015 Elsevier Ltd. All rights reserved.

Impact of a possible environmental externalities internalisation on energy prices: The case of the greenhouse gases from the Greek electricity sector

International Nuclear Information System (INIS)

Georgakellos, Dimitrios A.

2010-01-01

The present paper is concerned with the impact of the internalisation of environmental externalities on energy prices. In this context, its aim is to quantify the external cost of greenhouse gases (specifically carbon dioxide) generated during electricity production in the thermal power plants in Greece and to estimate the impact on the electricity production cost and on the electricity prices of a possible internalisation of this external cost by the producers. For this purpose, this paper applies the EcoSenseLE online tool to quantify the examined externalities. This research finds that the calculated external cost is significantly high (compared to the corresponding production cost) mainly in lignite-fired power plants. Specifically, a possible internalisation of this external cost would increase the production cost by more than 52% (on average), which, in turn, would affect similarly the electricity prices. This finding could be important for decision makers in the electricity sector to develop strategies for emission reduction and to develop environmental and energy policies. The general limitation of the external cost methodology applies to this work as it uses the standard method developed for the Externe project. Similarly, the data limitations as well as assumptions related to the costs and exclusions/ omissions of cost elements affect the results.

Awareness of external costs - helps to improve environmental protection. The methodological convention for estimates of environmental externalities: the energy and transport sectors as examples; Externe Kosten kennen - Umwelt besser schuetzen. Die Methodenkonvention zur Schaetzung externer Kosten am Beispiel Energie und Verkehr

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-04-15

Today, environmental policy has to face economic considerations more than in former times. By means of an economic valuation of environmental damage, it is possible to estimate the economic utility of environmental policy measures. This is important because today's environmental policy prevents tomorrow's environmental damage. At present, there is no other field where this fact has become as obvious as in climate policy. All recent publications have provided evidence that climate protection is worthwhile because the costs of climate protection measures are lower than those resulting from inactivity. Economic valuation means to weigh a number of choices and targets against each other. Valuation requires value judgements. How to define a damage event? How to weigh different goods which deserve protection against each other and damage occurring today against that occurring in the future? How to deal with uncertainty with regard to future returns and risks? These are only a few of the problems depending on value judgements that we have to face. This applies in general and not only in economic valuation. The Methodological Convention elaborated by the Federal Environment Agency addresses these problems. It has been the intention of the authors to explain and substantiate their value judgements and the criteria underlying the valuation of environmental damage (as well as that of environmental damage that has been avoided). Thus, the Federal Environment Agency wishes to make a contribution to transparency and consistency of decision-making in environmental policy. The principles of valuation suggested may be used for example to substantiate cost rates for external costs incurred by energy production and transport. The exemplary calculations have demonstrated that the internalization of environmental costs has been achieved in part only. Policy makers may choose different ways to gradually improve this situation. Internalization does not necessarily mean that

Developing a Magnetic Resonance Imaging measurement of the forces within 3D granular materials under external loads

Science.gov (United States)

Elrington, Stefan; Bertrand, Thibault; Frey, Merideth; Shattuck, Mark; O'Hern, Corey; Barrett, Sean

2014-03-01

Granular materials are comprised of an ensemble of discrete macroscopic grains that interact with each other via highly dissipative forces. These materials are ubiquitous in our everyday life ranging in scale from the granular media that forms the Earth's crust to that used in agricultural and pharmaceutical industries. Granular materials exhibit complex behaviors that are poorly understood and cannot be easily described by statistical mechanics. Under external loads individual grains are jammed into place by a network of force chains. These networks have been imaged in quasi two-dimensional and on the outer surface of three-dimensional granular materials. Our goal is to use magnetic resonance imaging (MRI) to detect contact forces deep within three-dimensional granular materials, using hydrogen-1 relaxation times as a reporter for changes in local stress and strain. To this end, we use a novel pulse sequence to narrow the line width of hydrogen-1 in rubber. Here we present our progress to date, and prospects for future improvements.

Force sharing and other collaborative strategies in a dyadic force perception task

Science.gov (United States)

Tatti, Fabio

2018-01-01

When several persons perform a physical task jointly, such as transporting an object together, the interaction force that each person experiences is the sum of the forces applied by all other persons on the same object. Therefore, there is a fundamental ambiguity about the origin of the force that each person experiences. This study investigated the ability of a dyad (two persons) to identify the direction of a small force produced by a haptic device and applied to a jointly held object. In this particular task, the dyad might split the force produced by the haptic device (the external force) in an infinite number of ways, depending on how the two partners interacted physically. A major objective of this study was to understand how the two partners coordinated their action to perceive the direction of the third force that was applied to the jointly held object. This study included a condition where each participant responded independently and another one where the two participants had to agree upon a single negotiated response. The results showed a broad range of behaviors. In general, the external force was not split in a way that would maximize the joint performance. In fact, the external force was often split very unequally, leaving one person without information about the external force. However, the performance was better than expected in this case, which led to the discovery of an unanticipated strategy whereby the person who took all the force transmitted this information to the partner by moving the jointly held object. When the dyad could negotiate the response, we found that the participant with less force information tended to switch his or her response more often. PMID:29474433

Particle separation by external fields on periodic surfaces

International Nuclear Information System (INIS)

Sancho, J M; Khoury, M; Lindenberg, K; Lacasta, A M

2005-01-01

Particles moving on perfect periodic surfaces under the influence of external forces may move along directions that deviate from that of the force. We briefly recall previous results for transport of particles on surfaces with periodic traps or periodic obstacles driven by a constant external force, and present new results for particles moving in a harmonic periodic potential. The sorting properties are explored as a function of a number of control parameters, specifically the friction, force amplitude and direction, temperature, and lattice constants

ExternE: Externalities of energy Vol. 3. Coal and lignite

International Nuclear Information System (INIS)

Berry, J.; Holland, M.; Lee, D.

1995-01-01

Awareness of the environmental damage resulting from human activity, particularly concerning energy use, has grown greatly in recent years. Effects such as global warming, ozone depletion and acid rain are now the subjects of much research and public debate. It is now known that these and other effects damage a wide range of receptors, including human health, forests, crops, freshwater ecosystems and buildings. Such damages are typically not accounted for by the producers and consumers of the good in question (in this case energy). They are thus referred to as 'external costs' or 'externalities', to distinguish them from the private costs which account for the construction of plant, cost of fuel, wages, etc. In recent years there has been a growing interest in the assessment of the environmental and health impacts of energy, and the related external costs. This concern is driven by a number of different factors: the need to integrate environmental concerns in decision making over the choice between different fuels and energy technologies; the need to evaluate the costs and benefits of stricter environmental standards; increased attention to the use of economic instruments for environmental policy; the need to develop overall indicators of environmental performance of different technologies; major changes in the energy sector, including privatisation, liberalisation of markets, reduction of subsidies, etc. An agreed methodology for calculation and integration of external costs has not been established. Earlier work is typically of a preliminary nature and tends to be deficient with respect to both the methods employed and the quality of models and data used. In consequence of this a collaborative project, the EC/US Fuel Cycles Study, was established between Directorate General XII (Science, Research and Technology) of the European Commission and the United States Department of Energy. This ran for the period 1991 to 1993, and good agreement on a variety of

Monetary value of the environmental and health externalities associated with production of ethanol from biomass feedstocks

International Nuclear Information System (INIS)

Kusiima, Jamil M.; Powers, Susan E.

2010-01-01

This research is aimed at monetizing the life cycle environmental and health externalities associated with production of ethanol from corn, corn stover, switchgrass, and forest residue. The results of this study reveal current average external costs for the production of 1 l of ethanol ranged from $0.07 for forest residue to $0.57 for ethanol production from corn. Among the various feedstocks, the external costs of PM 10 , NO X , and PM 2.5 are among the greatest contributors to these costs. The combustion of fossil fuels in upstream fertilizer and energy production processes is the primary source of these emissions and their costs, especially for corn ethanol. The combined costs of emissions associated with the production and use of nitrogen fertilizer also contribute substantially to the net external costs. For cellulosic ethanol production, the combustion of waste lignin to generate heat and power helps to keep the external costs lower than corn ethanol. Credits both for the biogenic carbon combustion and displacement of grid electricity by exporting excess electricity substantially negate many of the emissions and external costs. External costs associated with greenhouse gas emissions were not significant. However, adding estimates of indirect GHG emissions from land use changes would nearly double corn ethanol cost estimates.

Health-related external cost assessment in Europe: methodological developments from ExternE to the 2013 Clean Air Policy Package.

Science.gov (United States)

van der Kamp, Jonathan; Bachmann, Till M

2015-03-03

"Getting the prices right" through internalizing external costs is a guiding principle of environmental policy making, one recent example being the EU Clean Air Policy Package released at the end of 2013. It is supported by impact assessments, including monetary valuation of environmental and health damages. For over 20 years, related methodologies have been developed in Europe in the Externalities of Energy (ExternE) project series and follow-up activities. In this study, we aim at analyzing the main methodological developments over time from the 1990s until today with a focus on classical air pollution-induced human health damage costs. An up-to-date assessment including the latest European recommendations is also applied. Using a case from the energy sector, we identify major influencing parameters: differences in exposure modeling and related data lead to variations in damage costs of up to 21%; concerning risk assessment and monetary valuation, differences in assessing long-term exposure mortality risks together with assumptions on particle toxicity explain most of the observed changes in damage costs. These still debated influencing parameters deserve particular attention when damage costs are used to support environmental policy making.

External radiation surveillance

Energy Technology Data Exchange (ETDEWEB)

Antonio, E.J.

1995-06-01

This section of the 1994 Hanford Site Environmental Report describes how external radiation was measured, how surveys were performed, and the results of these measurements and surveys. External radiation exposure rates were measured at locations on and off the Hanford Site using thermoluminescent dosimeters (TLD). External radiation and contamination surveys were also performed with portable radiation survey instruments at locations on and around the Hanford Site.

External radiation surveillance

International Nuclear Information System (INIS)

Antonio, E.J.

1995-01-01

This section of the 1994 Hanford Site Environmental Report describes how external radiation was measured, how surveys were performed, and the results of these measurements and surveys. External radiation exposure rates were measured at locations on and off the Hanford Site using thermoluminescent dosimeters (TLD). External radiation and contamination surveys were also performed with portable radiation survey instruments at locations on and around the Hanford Site

Comparing internal and external drivers in the southern Benguela ...

African Journals Online (AJOL)

Comparing internal and external drivers in the southern Benguela and the southern and ... during the model fitting: internal forcing by means of the trophic flow controls ... and two kinds of external forcing, namely fishing and the environment.

Feasibility design of a floating airport and estimation of environmental forces on it; Futaishiki kuko no sekkei to kankyo gairyoku no suitei ni kansuru kento

Energy Technology Data Exchange (ETDEWEB)

Inoue, Y.; Tabeta, S.; Takei, Y. [Yokohama National University, Yokohama (Japan). Faculty of Engineering

1996-12-31

A rough design was performed on a floating airport. On this floating structure, environmental external force was estimated, mooring design was carried out, and discussions was given on the position retaining performance important for airport functions and behavior of the floating structure. The discussion was given on cases that the airport is surrounded and not surrounded by floating breakwaters. A floating structure which becomes super-large in size requires considerations on force due to sea level gradient as a result of a tide. Deriving flow condition changes and force acting on the floating structure simultaneously by using numerical calculations makes it possible to estimate current force given with considerations on influence of the flow conditions created by installing the floating airport. Estimation was carried out by using a zone dividing method on wave drifting force acting upon the floating airport. As a result, it was found that installing floating and permeating type breakwaters can reduce the wave drifting force acting on the floating airport. The wave drifting force working on the floating airport can be reduced by installing the floating and permeating type breakwaters to lower levels than when no such breakwaters are installed. The airport may be moored with less number of fenders when the fenders of the same type are used. 18 refs., 10 figs., 5 tabs.

Supplemental Environmental Impact Statement for F-35 Beddown at Eglin Air Force Base, Florida

Science.gov (United States)

2014-06-26

IFR instrument flight rules IJTS Initial Joint Training Site ILLUM Illuminating ILS Instrument Landing System IMPLAN an economic impact modeling...Final Supplemental ENVIRONMENTAL IMPACT STATEMENT FOR F-35 BEDDOWN AT EGLIN AIR FORCE BASE, FLORIDA JANUARY 2014 Report Documentation Page Form...Supplemental Environmental Impact Statement 3. DATES COVERED 00-00-2011 to 00-00-2014 4. TITLE AND SUBTITLE Final Supplemental Environmental Impact

Environmental assessment of insulation methods. Environmental data for insulation products and eco-profiles for light external walls; Miljoevurdering af isoleringsmetoder. Miljoedata for isoleringsprodukter og miljoeprofiler for lette ydervaegge

Energy Technology Data Exchange (ETDEWEB)

Krogh, K.; Rasmussen, J.O.; Nielsen, P.A.

2001-07-01

The project included selected insulation products like products made of cellulose fibres, flax fibres and perlite, which could all be used in external walls, internal walls, cavity walls and lofts. Up till now only products of mineral fibres were used. The aim of the project was to collect environmental data for selected products for the whole lifetime and to assess environmental impacts caused by the products. The total environmental impacts of a building element, e.g. external walla, were calculated from environmental data of the products. The impacts could be shown in a diagram, eco-profiles, which also showed contributions of the materials to the total impacts. The calculations used the principles of life cycle assessment (LCA), but today LCA does not include health aspects in the indoor climate or environmental health aspects caused by disposal processes. Therefore, this project included qualitative assessments for these two life cycle phases. The project did not treat impacts in the working environment as these health aspects are covered by other projects (COWI, 2000 and Engelund et al., 1999). (au)

External costs of energy - do the answers match the questions? Looking back at 10 years of ExternE

International Nuclear Information System (INIS)

Krewitt, W.

2002-01-01

While the claim for 'getting prices right' is quite popular in conceptual policy papers, the implementation of appropriate internalisation strategies is still hampered by a lack of reliable external cost data. Great expectations were set into the ExternE project, a major research programme launched by the European Commission at the beginning of the 1990s to provide a scientific basis for the quantification of energy related externalities and to give guidance supporting the design of internalisation measures. After more than a decade of research, the ExternE label became a well recognised standard source for external cost data. Looking back into the ExternE history, the paper pursues how emerging new scientific insights and changing background assumptions affected external cost estimates and related recommendations to policy over time. Based on ExternE results, the usefulness and inherent limitations of external cost estimates for impact categories like climate change or nuclear waste disposal is discussed. The paper also gives examples on how external costs in spite of remaining uncertainties are successfully used to support environmental policy. (Author)

The Influence of the External Signal Modulation Waveform and Frequency on the Performance of a Photonic Forced Oscillator.

Science.gov (United States)

Sánchez-Castro, Noemi; Palomino-Ovando, Martha Alicia; Estrada-Wiese, Denise; Valladares, Nydia Xcaret; Del Río, Jesus Antonio; de la Mora, Maria Beatriz; Doti, Rafael; Faubert, Jocelyn; Lugo, Jesus Eduardo

2018-05-21

Photonic crystals have been an object of interest because of their properties to inhibit certain wavelengths and allow the transmission of others. Using these properties, we designed a photonic structure known as photodyne formed by two porous silicon one-dimensional photonic crystals with an air defect between them. When the photodyne is illuminated with appropriate light, it allows us to generate electromagnetic forces within the structure that can be maximized if the light becomes localized inside the defect region. These electromagnetic forces allow the microcavity to oscillate mechanically. In the experiment, a chopper was driven by a signal generator to modulate the laser light that was used. The driven frequency and the signal modulation waveform (rectangular, sinusoidal or triangular) were changed with the idea to find optimal conditions for the structure to oscillate. The microcavity displacement amplitude, velocity amplitude and Fourier spectrum of the latter and its frequency were measured by means of a vibrometer. The mechanical oscillations are modeled and compared with the experimental results and show good agreement. For external frequency values of 5 Hz and 10 Hz, the best option was a sinusoidal waveform, which gave higher photodyne displacements and velocity amplitudes. Nonetheless, for an external frequency of 15 Hz, the best option was the rectangular waveform.

The Influence of the External Signal Modulation Waveform and Frequency on the Performance of a Photonic Forced Oscillator

Directory of Open Access Journals (Sweden)

Noemi Sánchez-Castro

2018-05-01

Full Text Available Photonic crystals have been an object of interest because of their properties to inhibit certain wavelengths and allow the transmission of others. Using these properties, we designed a photonic structure known as photodyne formed by two porous silicon one-dimensional photonic crystals with an air defect between them. When the photodyne is illuminated with appropriate light, it allows us to generate electromagnetic forces within the structure that can be maximized if the light becomes localized inside the defect region. These electromagnetic forces allow the microcavity to oscillate mechanically. In the experiment, a chopper was driven by a signal generator to modulate the laser light that was used. The driven frequency and the signal modulation waveform (rectangular, sinusoidal or triangular were changed with the idea to find optimal conditions for the structure to oscillate. The microcavity displacement amplitude, velocity amplitude and Fourier spectrum of the latter and its frequency were measured by means of a vibrometer. The mechanical oscillations are modeled and compared with the experimental results and show good agreement. For external frequency values of 5 Hz and 10 Hz, the best option was a sinusoidal waveform, which gave higher photodyne displacements and velocity amplitudes. Nonetheless, for an external frequency of 15 Hz, the best option was the rectangular waveform.

Environmental management systems and organizational change

DEFF Research Database (Denmark)

Jørgensen, Tine Herreborg

2000-01-01

and environmental management systems. The structure of the organizations has changed, the relationships with external partners have strengthened and the implementation of quality and environmental management systems has trimmed the organizations to manage and develop these areas. The organization analysis is based......The establishment of an environmental management system and its continuous improvements is a process towards a reduction of the companies' and the products' environmental impact. The organizations' ability to change is crucial in order to establish a dynamic environmental management system...... and to achieve continuous environmental improvements. The study of changes gives an insight into how organizations function, as well as their forces and barriers. This article focuses on the organizational changes that two companies have undergone from 1992 up until today in connection with their quality...

Environmental Assessment for the Air Force Research Laboratory Security Fence Project, Edwards Air Force Base, California

Science.gov (United States)

2012-11-26

Pleistocene/Early-Holocene Prehistory (12,000 to 7,000 BP). The Lake Mojave Period in the southwestern Great Basin comprises a regional manifestation...adaptive patterns with focal exploitation of such habitats (Tetra Tech 2010). Middle-Holocene Prehistory (8,000 to 4,000 BP). Succeeding Lake Mojave in the...Security Fence at Edwards Air Force Base, California Late Holocene Prehistory (4,000 to Contact). With return to more “favorable” environmental

Surface electromyography activity of the rectus abdominis, internal oblique, and external oblique muscles during forced expiration in healthy adults.

Science.gov (United States)

Ito, Kenichi; Nonaka, Koji; Ogaya, Shinya; Ogi, Atsushi; Matsunaka, Chiaki; Horie, Jun

2016-06-01

We aimed to characterize rectus abdominis, internal oblique, and external oblique muscle activity in healthy adults under expiratory resistance using surface electromyography. We randomly assigned 42 healthy adult subjects to 3 groups: 30%, 20%, and 10% maximal expiratory intraoral pressure (PEmax). After measuring 100% PEmax and muscle activity during 100% PEmax, the activity and maximum voluntary contraction of each muscle during the assigned experimental condition were measured. At 100% PEmax, the external oblique (pinternal oblique (pexternal oblique (pinternal oblique (pexternal oblique: pinternal oblique: p<0.01). The abdominal oblique muscles are the most active during forced expiration. Moreover, 30% PEmax is the minimum intensity required to achieve significant, albeit very slight, muscle activity during expiratory resistance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Behind the wheel and on the map: Genetic and environmental associations between drunk driving and other externalizing behaviors.

Science.gov (United States)

Quinn, Patrick D; Harden, K Paige

2013-11-01

Drunk driving, a major contributor to alcohol-related mortality, has been linked to a variety of other alcohol-related (e.g., Alcohol Dependence, early age at first drink) and non-alcohol-related externalizing behaviors. In a sample of 517 same-sex twin pairs from the National Longitudinal Study of Adolescent Health, we examined 3 conceptualizations of the etiology of drunk driving in relation to other externalizing behaviors. A series of behavioral-genetic models found consistent evidence for drunk driving as a manifestation of genetic vulnerabilities toward a spectrum of alcohol-related and non-alcohol-related externalizing behaviors. Most notably, multidimensional scaling analyses produced a genetic "map" with drunk driving located near its center, supporting the strength of drunk driving's genetic relations with a broad range of externalizing behaviors. In contrast, nonshared environmental associations with drunk driving were weaker and more diffuse. Drunk driving may be a manifestation of genetic vulnerabilities toward a broad externalizing spectrum. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Externalities of energy and atomic power

International Nuclear Information System (INIS)

2006-09-01

Energy technology ensures not only energy supply but also has great impacts on society and environments. Economical value and effect evaluation alone doesn't mean appropriate so the evaluation of 'externalities' should be appreciated. In order to assess atomic power in this context, the Atomic Energy Society of Japan set up a research committee on 'externalities of energy and atomic power' from April 2002 to March 2006, whose activities were described in this report. In addition to environmental effects and environmental externalities, four areas were newly studied as follows: (1) biological effects of low dose rate exposure and externalities, (2) externalities as social/economical effects including stable supply and security, (3) energy technologies evaluation and (4) social choice and decision-making. (T. Tanaka)

External communication in environmental projects; La comunicacion externa en los proyectos ambientales

Energy Technology Data Exchange (ETDEWEB)

Ruiz Feltrer, C.

2004-07-01

The public's awareness of industrial projects is constantly growing. In addition, if such project imply any sort of environmental impact, their awareness increases and may result in a series of deterrents to the start-up of the said projects. The present article focuses on one of the most powerful of management tools through, at the same time, the one most often forgotten by companies: external communication. In the first part of the article, we shall analyse the reasons why many industrial projects never actually see the light of day. Starting from three working hypotheses, we came to the conclusion that we must be proactive in our communication if we wish our development to be durable and to last. In the second part, we put forward a method for planning communication aimed at first of all, foreseeing, and, ultimately, solving situations arising from the deterrents already mentioned. We have used a classical planning model from which to develop a specific application called Environmental Communication. (Author)

Magnus force in superfluids and superconductors

International Nuclear Information System (INIS)

Sonin, E.B.

1997-01-01

The forces on the vortex, transverse to its velocity, are considered. In addition to the superfluid Magnus force from the condensate (superfluid component), there are transverse forces from thermal quasiparticles and external fields violating the Galilean invariance. The forces between quasiparticles and the vortex originate from interference of quasiparticles with trajectories on the left and on the right from the vortex like similar forces for electrons interacting with the thin magnetic-flux tube (the Aharonov-Bohm effect). These forces are derived for phonons from the equations of superfluid hydrodynamics, and for BCS quasiparticles from the Bogolyubov endash de Gennes equations. The effect of external fields breaking Galilean invariance is analyzed for vortices in the two-dimensional Josephson junction array. The symmetry analysis of the classical equations for the array shows that the total transverse force on the vortex vanishes. Therefore the Hall effect which is linear in the transverse force is absent also. This means that the Magnus force from the superfluid component exactly cancels with the transverse force from the external fields. The results of other approaches are also brought together for discussion. copyright 1997 The American Physical Society

Environment and externalization; Environnement et externalisation

Energy Technology Data Exchange (ETDEWEB)

Kremlis, G.; Renaud, R. [Association francaise des ingenieurs et techniciens de l' environnement, AFITE, 75 - Paris (France); Touron, M. [Veritas, 75 - Paris (France)] [and others

2001-07-01

This document presents the discussions of the 16 may 2000, concerning the externalization and the environment and proposes to answer the following questions: is the externalization a new strategy to better perceive, hopeful engineering department, the technological risks problems, the environment or the land pollution? Does the externalization allow a better organization of the enterprise? To analyse the situation, the document presents the white book of the environmental liability, the administration point of view, some enterprises examples and the importance of the environmental management. (A.L.B.)

A Methodology Proposal to Calculate the Externalities of Liquid Biofuels

Energy Technology Data Exchange (ETDEWEB)

Galan, A.; Gonzalez, R.; Varela, M. [Ciemat. Madrid (Spain)

1999-05-01

The aim of the survey is to propose a methodology to calculate the externalities associated with the liquid bio fuels cycle. The report defines the externalities from a theoretical point of view and classifies them. The reasons to value the externalities are explained as well as the existing methods. Furthermore, an evaluation of specific environmental and non-environmental externalities is also presented. The report reviews the current situation of the transport sector, considering its environmental effects and impacts. The progress made by the ExternE and ExternE-transport projects related the externalities of transport sector is assessed. Finally, the report analyses the existence of different economic instruments to internalize the external effects of the transport sector as well as other aspects of this internalization. (Author) 58 refs.

Methodology of social and environmental external costs estimation in the Ukraine’s energy sector

Directory of Open Access Journals (Sweden)

Karaieva Nataliia Veniaminivna

2016-09-01

Full Text Available Paper objective is analysis of the external costs assessment model for the eco-social damage, and/or human capital losses caused by environmental pollution from the energy enterprises in Ukraine. Using the given method, necessary initial socio-economic parameters were defined and used for calculating the social costs of capital health losses in Ukraine due to deterioration of the environment, and due to the negative impact of energy sector on the air quality for the period 2002-2013. On the proposed technique determines the range value of social losses due to the negative impact of energy on air quality in Ukraine excluding future external costs for years 2002 – 2013 ranges from 1.6 – 4.5% of GDP, and the range of values of taking into account future costs is 2.0 – 6.2% of GDP.

Driving forces and barriers for environmental technology development; Drivkrefter og barrierer for utvikling av miljoeteknologi

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Driving forces and barriers behind development and usage of environmental technology is discussed, and also whether there are certain characteristics related to environmental innovations compared to other innovations in general. The development of environmental technology is in principle dominated by the same drivers and barriers as any other technology, but the order and strength of the various factors may be different. This examination as well as other empirical studies shows that regulations play a greater part for environmental technology than 'pure market forces'. To many participants it is important to be one step ahead of the regulations, i.e. the expected regulations are equally important as the factual ones in driving the technology development. Players in the business community express that it is important that the authorities cooperate with them when introducing new regulations. This will increase acceptance for the regulations and facilitate the necessary adjustments. The most important barrier in the development and use of the technologies studied is probably the lack of demand.

External-environmental and internal-health early life predictors of adolescent development.

Science.gov (United States)

Hartman, Sarah; Li, Zhi; Nettle, Daniel; Belsky, Jay

2017-12-01

A wealth of evidence documents associations between various aspects of the rearing environment and later development. Two evolutionary-inspired models advance explanations for why and how such early experiences shape later functioning: (a) the external-prediction model, which highlights the role of the early environment (e.g., parenting) in regulating children's development, and (b) the internal-prediction model, which emphasizes internal state (i.e., health) as the critical regulator. Thus, by using data from the NICHD Study of Early Child Care and Youth Development, the current project draws from both models by investigating whether the effect of the early environment on later adolescent functioning is subject to an indirect effect by internal-health variables. Results showed a significant indirect effect of internal health on the relation between the early environment and adolescent behavior. Specifically, early environmental adversity during the first 5 years of life predicted lower quality health during childhood, which then led to problematic adolescent functioning and earlier age of menarche for girls. In addition, for girls, early adversity predicted lower quality health that forecasted earlier age of menarche leading to increased adolescent risk taking. The discussion highlights the importance of integrating both internal and external models to further understand the developmental processes that effect adolescent behavior.

Final Environmental Assessment for the California Space Center at Vandenberg Air Force Base, California

Science.gov (United States)

2010-06-02

rooted , mesophylic plant species that Chapter 3. Affected Environment Final Environmental Assessment - California Space Center, Vandenberg Air...Chapter 3. Affected Environment 3-12 Final Environmental Assessment - California Space Center, Vandenberg Air Force Base the root and debris zone of the...protruding objects, slippery soils or mud, and biological hazards including vegetation (i.e. poison oak and stinging nettle ), animals (i.e. insects

Internal-external malalignment of the femoral component in kinematically aligned total knee arthroplasty increases tibial force imbalance but does not change laxities of the tibiofemoral joint.

Science.gov (United States)

Riley, Jeremy; Roth, Joshua D; Howell, Stephen M; Hull, Maury L

2018-06-01

The purposes of this study were to quantify the increase in tibial force imbalance (i.e. magnitude of difference between medial and lateral tibial forces) and changes in laxities caused by  2° and 4° of internal-external (I-E) malalignment of the femoral component in kinematically aligned total knee arthroplasty. Because I-E malalignment would introduce the greatest changes to the articular surfaces near 90° of flexion, the hypotheses were that the tibial force imbalance would be significantly increased near 90° flexion and that primarily varus-valgus laxity would be affected near 90° flexion. Kinematically aligned TKA was performed on ten human cadaveric knee specimens using disposable manual instruments without soft tissue release. One 3D-printed reference femoral component, with unmodified geometry, was aligned to restore the native distal and posterior femoral joint lines. Four 3D-printed femoral components, with modified geometry, introduced I-E malalignments of 2° and 4° from the reference component. Medial and lateral tibial forces were measured from 0° to 120° flexion using a custom tibial force sensor. Bidirectional laxities in four degrees of freedom were measured from 0° to 120° flexion using a custom load application system. Tibial force imbalance increased the greatest at 60° flexion where a regression analysis against the degree of I-E malalignment yielded sensitivities (i.e. slopes) of 30 N/° (medial tibial force > lateral tibial force) and 10 N/° (lateral tibial force > medial tibial force) for internal and external malalignments, respectively. Valgus laxity increased significantly with the 4° external component with the greatest increase of 1.5° occurring at 90° flexion (p < 0.0001). With the tibial component correctly aligned, I-E malalignment of the femoral component caused significant increases in tibial force imbalance. Minimizing I-E malalignment lowers the increase in the tibial force imbalance. By keeping

Lower ionosphere response to external forcing: A brief review

Czech Academy of Sciences Publication Activity Database

Laštovička, Jan

2009-01-01

Roč. 43, č. 1 (2009), s. 1-14 ISSN 0273-1177 R&D Projects: GA ČR GA205/07/1367; GA ČR GA205/08/1356 Institutional research plan: CEZ:AV0Z30420517 Keywords : lower ionosphere * space weather forcing * solar activity * solar forcing * atmospheric waves * atmospheric forcing Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 1.079, year: 2009

Forced harmonic oscillations of the Euler-Bernoulli beam with resistance forces

Directory of Open Access Journals (Sweden)

Yuriy S. Krutiy

2015-12-01

Full Text Available The important issue in the oscillation theory is the study of resistance impact on oscillatory processes. Unlike the calculations of free oscillations, that reside in determination of natural frequencies and waveshapes and unlike the calculations of forced oscillations far away from resonance, that are performing without reference to friction, the oscillations researches in vicinity of resonance need accounting of friction forces. Special attention is paid to forced transverse fluctuations in beams as an important technical problem for engineering and building. Aim: The aim of the work is constructing of analytical solution of the problem of forced transverse vibrations of a straight rod with constant cross-section, which is under the influence of the harmonic load taking into account external and internal resistances. Materials and Methods: The internal resistance is taken into account using the corrected hypothesis of Kelvin-Voigt which reflects the empirically proven fact about the frequency-independent internal friction in the material. The external friction is also considered as frequency-independent. Results: An analytical solution is built for the differential equation of forced transverse oscillations of a straight rod with constant cross-section which is under the influence of the harmonic load taking into account external and internal resistances. As a result, analytically derived formulae are presented which describe the forced dynamic oscillations and the dynamic internal forces due to the harmonic load applied to the rod thus reducing the problem with any possible fixed ends to the search of unknown integration constants represented in a form of initial parameters.

Energy policy and externalities: an overview

International Nuclear Information System (INIS)

Pearce, D.

2002-01-01

Substantial progress has been made in estimating the monetary value of the environmental impacts of different energy systems. Perhaps the best known study in Europe is that sponsored by the European Commission and known as the ExternE programme. In the USA a comparable project is that jointly sponsored by the US Department of Energy and the European Commission. There are many others. In each case what is sought is a monetary value of an environmental impact arising from a unit of energy, usually standardised as a kilowatt hour. These environmental impacts are usually termed 'externalities'. An externality exists if two conditions are met. First, some negative (or positive) impact is generated by an economic activity and imposed on third parties. Second, that impact must not be priced in the market place, i.e. if the effect is negative, no compensation is paid by the generator of the externality to the sufferer. If the effect is positive, the generator of the externality must not appropriate the gains to the third party, e.g. via some price that is charged. In the energy externality literature, the procedure of expressing the externalities in, say, cents or milli-euros (1000 th of an Euro = m-euro) per kWh results in an 'adder'. An adder is simply the unit externality cost added to the standard resource cost of energy. Thus, if an electricity source costs X m/euros to produce or deliver, the final social cost of it is (X+y) m-euros where y is the externality adder. While externality adders have been researched most in the context of energy, they are increasingly being estimated for other economic sectors, notably transport and agriculture. This paper presents the uses of such figures. (author)

External costs of electricity; Les couts externes de l'electricite

Energy Technology Data Exchange (ETDEWEB)

Rabl, A. [Ecole des Mines de Paris, 75 (France); Spadaro, J.V. [International Atomic Energy Agency (IAEA), Vienna (Austria)

2005-07-01

This article presents a synthesis of the ExternE project (External costs of Energy) of the European community about the external costs of power generation. Pollution impacts are calculated using an 'impact pathways' analysis, i.e. an analysis of the emission - dispersion - dose-response function - cost evaluation chain. Results are presented for different fuel cycles (with several technological variants) with their confidence intervals. The environmental impact costs are particularly high for coal: for instance, in France, for coal-fired power plants it is of the same order as the electricity retail price. For natural gas, this cost is about a third of the one for coal. On the contrary, the environmental impact costs for nuclear and renewable energies are low, typically of few per cent of the electricity price. The main part of these costs corresponds to the sanitary impacts, in particular the untimely mortality. In order to avoid any controversy about the cost evaluation of mortality, the reduction of the expectation of life due to the different fuel cycles is also indicated and the risks linked with nuclear energy are presented using several comparisons. (J.S.)

Manipulating nanoparticle transport within blood flow through external forces: an exemplar of mechanics in nanomedicine

Science.gov (United States)

Ye, Huilin; Shen, Zhiqiang; Yu, Le; Wei, Mei; Li, Ying

2018-03-01

A large number of nanoparticles (NPs) have been raised for diverse biomedical applications and some of them have shown great potential in treatment and imaging of diseases. Design of NPs is essential for delivery efficacy due to a number of biophysical barriers, which prevents the circulation of NPs in vascular flow and their accumulation at tumour sites. The physiochemical properties of NPs, so-called `4S' parameters, such as size, shape, stiffness and surface functionalization, play crucial roles in their life journey to be delivered to tumour sites. NPs can be modified in various ways to extend their blood circulation time and avoid their clearance by phagocytosis, and efficiently diffuse into tumour cells. However, it is difficult to overcome these barriers simultaneously by a simple combination of `4S' parameters for NPs. At this moment, external triggerings are necessary to guide the movement of NPs, which include light, ultrasound, magnetic field, electrical field and chemical interaction. The delivery system can be constructed to be sensitive to these external stimuli which can reduce the non-specific toxicity and improve the efficacy of the drug-delivery system. From a mechanics point of view, we discuss how different forces play their roles in the margination of NPs in blood flow and tumour microvasculature.

Externalities of fuel cycles 'ExternE' project. Coal fuel cycle. Estimation of physical impacts and monetary valuation for priority impact pathways

International Nuclear Information System (INIS)

Berry, J.E.; Holland, M.R.; Watkiss, P.R.

1994-01-01

Background to the ExternE Project Awareness of the environmental damage resulting from human activity, particularly concerning energy use, has grown greatly in recent years. Effects such as global warming, ozone depletion and acid rain are now the subjects of much research and public debate. It is now known that these and other effects damage a wide range of receptors, including human health, forests, crops, freshwater ecosystems and buildings. Such damages are typically not accounted for by the producers and consumers of the good in question (in this case energy). They are thus referred to as 'external costs' or 'externalities', to distinguish them from the private costs which account for the construction of plant, cost of fuel, wages, etc. In recent years there has been a growing interest in the assessment of the environmental and health impacts of energy, and the related external costs. This concern is driven by a number of different factors; The need to integrate environmental concerns in decision making over the choice between different fuels and energy technologies. The need to evaluate the costs and benefits of stricter environmental standards. Increased attention to the use of economic instruments for environmental policy. The need to develop overall indicators of environmental performance of different technologies. Major changes in the energy sector, including privatisation, liberalisation of markets, reduction of subsidies, etc. An agreed methodology for calculation and integration of external costs has not been established. Earlier work is typically of a preliminary nature and tends to be deficient with respect to both the methods employed and the quality of models and data used. In consequence of this a collaborative project, the EC/US Fuel Cycles Study, was established between Directorate General XII (Science, Research and Technology) of the European Commission and the United States Department of Energy. This ran for the period 1991 to 1993, and good

Internalizing environmental costs: A survey of progress in estimating the external environmental costs of electricity production and a review of market-based policies to incorporate them

International Nuclear Information System (INIS)

Eto, J.H.; Helcke, G.

1991-01-01

The production of electricity creates environmental insults whose costs are not fully reflected in the prices paid by consumers for electricity services. Failure to incorporate these external costs leads to economically inefficient production and consumption decisions. The present work reviews two related efforts to address this market distortion. The first concerns progress in estimating the uninternalized environmental costs of electricity production. The second concerns market-based approaches to internalizing these costs in electricity production and consumption decisions. 10 tabs.; 41 refs

Supplemental Environmental Assessment for the Mid-Bay Bridge Connector Phases 2 and 3, Eglin Air Force Base, Florida

Science.gov (United States)

2010-08-03

D. Rodriigue;c 96 CEGICEVS PEPARTMENT OF THE AWR FORCE HEADQUARTERS 96TH AIR &ASE WING (AFMC) EGUN AJR FORCE BASE, FLORIDA 501 Deleon Stteet...Supplemental Environmental Assessment Maria D. Rodriguez 96CEG/CEVS DEPARTMENT OF THE AiR FORCE HEADQUARTERS 96Tit AIR BASE WING (I’ fMC) EGUN AIR FORCE...BASE WING (AFMC) EGUN AIR fORCE BASE, FLORIDA Historic Preservation Specialist Old Post Office Building 1100 Pennsylvania Avenue, NW, Suite 803

Measurement of Distraction Force in Cleft Lip and Palate Patients During Le Fort I Maxillary Advancement With Rigid External Distraction.

Science.gov (United States)

Sawada, Hiromi; Ogawa, Takuya; Kataoka, Keiichi; Baba, Yoshiyuki; Moriyama, Keiji

2017-03-01

Maxillary distraction osteogenesis (DO) is a mainstream surgical technique for patients who have severe maxillary hypoplasia associated with craniofacial syndromes and cleft-related deformities. However, limited information about the biomechanical aspects of maxillary DO is available limiting broad utilization and improvements to the procedure. The objective of this study was to analyze force levels during the active distraction process and to investigate the relationship between distraction force and maxillary movement during Le Fort I maxillary DO using a rigid external distraction (RED) system. Microtension gauges were integrated into the distraction wires on each side of the RED system. Six patients with cleft lip and palate aged 12.8 to 23.5 years underwent strain gauge measurements during maxillary advancement with DO using an RED system. Lateral cephalograms were taken to measure maxillary horizontal, vertical, and linear movements after DO. The average linear maxillary movement was 11.2 mm (range 8.5-15.9 mm). The applied forces ranged from 13.4 to 26.8 N. The distance of maxillary movement was proportional to the distraction force. The measurement of distraction forces during DO provides important information with which to establish appropriate protocols. Patients requiring more advancement may require more distraction force. However, other factors such as scarring, patient anatomy, surgical freedom of the osteotomized maxilla, and the like, may affect the required force during DO with the RED system.

The sources of sharing externalities: Specialization vs Competition

OpenAIRE

Bucci, Alberto; Ushchev, Philip

2015-01-01

In this paper, we undertake an in-depth inquiry into the nature of sharing externalities, and study how they affect the market outcome. We show that the key thing for understanding sharing externalities is the interplay between two forces: the specialization/complexity effect, on the one hand, and the competition effect, on the other hand. How the interaction between these two forces generates endogenous increasing returns to scale is definitely understudied in the literature because of the w...

Compendium of selected references on air emissions; health, risk, and valuation research; and environmental externalities

International Nuclear Information System (INIS)

Szpunar, C.B.

1992-07-01

In preparing to develop a cost-benefit methodology that could be applied to potential projects abroad involving new coal-fired power plants that make use of US clean coal technologies, the author reviewed a wide variety of reference sources. These are listed in this publication. Before this review, the author had conducted a number of literature searches that identified source material in the newly rediscovered field of environmental externalities and related topics that might also be of value to other energy and environmental researchers. Those sources that appeared to be appropriate but that the author was unable to review are also listed in this document. Thus, this document serves as a comprehensive compendium of source material on these subjects, arranged alphabetically within categories

Vibrations of a molecule in an external force field.

Science.gov (United States)

Okabayashi, Norio; Peronio, Angelo; Paulsson, Magnus; Arai, Toyoko; Giessibl, Franz J

2018-05-01

The oscillation frequencies of a molecule on a surface are determined by the mass distribution in the molecule and the restoring forces that occur when the molecule bends. The restoring force originates from the atomic-scale interaction within the molecule and with the surface, which plays an essential role in the dynamics and reactivity of the molecule. In 1998, a combination of scanning tunneling microscopy with inelastic tunneling spectroscopy revealed the vibrational frequencies of single molecules adsorbed on a surface. However, the probe tip itself exerts forces on the molecule, changing its oscillation frequencies. Here, we combine atomic force microscopy with inelastic tunneling spectroscopy and measure the influence of the forces exerted by the tip on the lateral vibrational modes of a carbon monoxide molecule on a copper surface. Comparing the experimental data to a mechanical model of the vibrating molecule shows that the bonds within the molecule and with the surface are weakened by the proximity of the tip. This combination of techniques can be applied to analyze complex molecular vibrations and the mechanics of forming and loosening chemical bonds, as well as to study the mechanics of bond breaking in chemical reactions and atomic manipulation.

Ground-Based Midcourse Defense (GMD) Initial Defensive Operations Capability (IDOC) at Vandenberg Air Force Base Environmental Assessment

Science.gov (United States)

2003-08-28

Zielinski , EDAW, Inc., concerning utilities supply and demand for Vandenberg Air Force Base, 1 August. Rush, P., 2002. Personal communication between...Pernell W. Rush, Technical Sergeant, Water Utilities/Water Treatment NCO, USAF 30th CES/CEOIU, Vandenberg Air Force Base, and James E. Zielinski ... Dave Savinsky, Environmental Consultant, 30 CES/CEVC, Vandenberg Air Force Base, on the Preliminary Draft Ground-Based Midcourse Defense (GMD

External Hand Forces Exerted by Long-Term Care Staff to Push Floor-Based Lifts: Effects of Flooring System and Resident Weight.

Science.gov (United States)

Lachance, Chantelle C; Korall, Alexandra M B; Russell, Colin M; Feldman, Fabio; Robinovitch, Stephen N; Mackey, Dawn C

2016-09-01

The aim of this study was to investigate the effects of flooring type and resident weight on external hand forces required to push floor-based lifts in long-term care (LTC). Novel compliant flooring is designed to reduce fall-related injuries among LTC residents but may increase forces required for staff to perform pushing tasks. A motorized lift may offset the effect of flooring on push forces. Fourteen female LTC staff performed straight-line pushes with two floor-based lifts (conventional, motor driven) loaded with passengers of average and 90th-percentile resident weights over four flooring systems (concrete+vinyl, compliant+vinyl, concrete+carpet, compliant+carpet). Initial and sustained push forces were measured by a handlebar-mounted triaxial load cell and compared to participant-specific tolerance limits. Participants rated pushing difficulty. Novel compliant flooring increased initial and sustained push forces and subjective ratings compared to concrete flooring. Compared to the conventional lift, the motor-driven lift substantially reduced initial and sustained push forces and perceived difficulty of pushing for all four floors and both resident weights. Participants exerted forces above published tolerance limits only when using the conventional lift on the carpet conditions (concrete+carpet, compliant+carpet). With the motor-driven lift only, resident weight did not affect push forces. Novel compliant flooring increased linear push forces generated by LTC staff using floor-based lifts, but forces did not exceed tolerance limits when pushing over compliant+vinyl. The motor-driven lift substantially reduced push forces compared to the conventional lift. Results may help to address risk of work-related musculoskeletal injury, especially in locations with novel compliant flooring. © 2016, Human Factors and Ergonomics Society.

Quality assurance task force, an interagency cooperative approach to assess quality of environmental data

International Nuclear Information System (INIS)

Albin, L.M.; Mooney, R.R.; Erickson, J.L.; Conklin, A.W.

1990-01-01

In 1985, the Washington State Legislature charged the Department of Social and Health Services' Office of Radiation Protection with reviewing, evaluating and improving environmental monitoring programs within the state. Special emphasis was placed on the Hanford Site in Richland. Government and private organizations involved in monitoring radiation effects on the environment were asked to advise and support the State of Washington. Together, these organizations formed the Environmental Radiation Quality Assurance Task Force for the Pacific Northwest. Data on radiation levels are collected by the various organizations and compared. If findings are not consistent, the Task Force investigates and makes recommendations for long-term solutions. Thus, a system of checks and balances is created, enhancing the credibility of the various monitoring programs. Efficiency in use of resources is increased because overlap and duplication by different monitoring agencies are minimized

Health, environmental risks and externalities of nuclear and other energy systems of Russia

International Nuclear Information System (INIS)

Vasiliev, A.P.; Demin, V.F.

2000-01-01

Due to different reasons the structure of electricity production systems of Russia should be reconsidered and changed. In this reconsideration the results of comparative risk assessment (CRA) and external cost assessment (ECA) are needed. CRA and ECA study has been carried out in the frame of the research program of International Center of Environmental Safety of Ministry of Atomic Energy of Russia. Main directions of this study are: 1) developing CRA and ECA methodology and data base ; 2) performing CRA and ECA for nuclear and other energy systems. Some tendencies in development of electricity production systems in Russia and preliminary results of CRA and ECA are described. (author)

Preliminary comparative estimate of the environmental externalities of the electrical generation in Cuba

International Nuclear Information System (INIS)

Turtos Carbonell, L.

1998-01-01

Determination of the externalises associated with the electrical generation and fundamentally its atmospherically environmental impact, win greater importance nowadays, with the objective that to medium term these could be incorporated into the economy of electricity production as the surest way to reduce this impact. In the work is accomplished a comparative preliminary estimate of the externalises of the electrical generation in Cuba based in the results obtained in the External Project (Externalises of Energy) and the emissions of the domestic Power Plant. Different processes to reduce these emissions are proposed. The economic feasibility of installing Abatement Emissions Technologies based on the calculated externalises is analyzed

ExternE: Externalities of energy Vol. 5. Nuclear

International Nuclear Information System (INIS)

Dreicer, M.; Tort, V.; Manen, P.

1995-01-01

Since the early 1970s, there has been increased interest in the environmental impacts that are caused by the generation of electricity. The comparative risk assessment studies at that time used mainly deaths and injuries as impact indicators. By the end of the 1980s studies changed to the assessment of the costs imposed on society and the environment that were not included in the market price of the energy produced, the so-called external costs. The preliminary studies that were published set the conceptual basis, grounded in neo-classical economics, for the valuation of the health and environmental impacts that could be assessed. As a consequence of the many questions raised by the methodologies employed by these early studies, Directorate General XII (DG XII) of the Commission of the European Communities established a collaborative research programme with the United States Department of Energy to identify an appropriate methodology for this type of work. Following the completion of this collaboration, the DG XII programme has continued as the ExternE project. The main objective of the work carried out at CEPN was to develop an impact pathway methodology for the nuclear fuel cycle that would be consistent with the methodologies developed for other fuel cycles, without loosing the nuclear-specific techniques required for a proper evaluation. In this way, comparisons between the different fuel cycles would be possible. This report presents the methodology and demonstration of the results in the context of the French nuclear fuel cycle. The United States team at Oak Ridge National Laboratory has previously issued a draft report on the results of their assessment. The French fuel cycle was broken down into 8 separate stages. Reference sites and 1990s technology were chosen to represent the total nuclear fuel cycle, as it exists today. In addition, the transportation of material between the sites was considered. The facilities are assessed for routine operation, except

External costs of electricity

International Nuclear Information System (INIS)

Rabl, A.; Spadaro, J.V.

2005-01-01

This article presents a synthesis of the ExternE project (External costs of Energy) of the European community about the external costs of power generation. Pollution impacts are calculated using an 'impact pathways' analysis, i.e. an analysis of the emission - dispersion - dose-response function - cost evaluation chain. Results are presented for different fuel cycles (with several technological variants) with their confidence intervals. The environmental impact costs are particularly high for coal: for instance, in France, for coal-fired power plants it is of the same order as the electricity retail price. For natural gas, this cost is about a third of the one for coal. On the contrary, the environmental impact costs for nuclear and renewable energies are low, typically of few per cent of the electricity price. The main part of these costs corresponds to the sanitary impacts, in particular the untimely mortality. In order to avoid any controversy about the cost evaluation of mortality, the reduction of the expectation of life due to the different fuel cycles is also indicated and the risks linked with nuclear energy are presented using several comparisons. (J.S.)

Effect of various periodic forces on Duffing oscillator

Indian Academy of Sciences (India)

Bifurcations and chaos in the ubiquitous Duffing oscillator equation with different external periodic forces are studied numerically. The external periodic forces considered are sine wave, square wave, rectified sine wave, symmetric saw-tooth wave, asymmetric saw-tooth wave, rectangular wave with amplitude-dependent ...

The valuation of external costs: An overview of issues and state actions

International Nuclear Information System (INIS)

Caverhill, E.J.

1992-01-01

The valuation of externalities helps determine the cost effectiveness of environmentally superior resources that would not be cost effective on a direct cost comparison to utility avoided costs. Explicitly monetizing externalities appears to be the best way to meet the criteria of consistency across resource options and pollutants and allowing selection of societally least-cost resources among a variety of resource types. Environmental costs should be defined so as not to exclude any potential external effects, including all environmental, social, and economic effects. For practical purposes, the definition could probably include only environmental externalities without materially affecting resource decisions in the foreseeable future for most North American utilities. More specifically, a comprehensive list of external costs should at least include emissions of pollutants such as SO 2 , CO, NO x , volatile organics, and greenhouse gases; thermal effluents; solid wastes; risk of catastrophic accidents; and for hydro projects, destruction of habitat and recreational areas, and mercury accumulation in reservoirs. Environmental effects should then be counted and valued, most commonly by damage costing or regulatory cost of control. Some utilities and other parties have proposed a market-based approach to valuing externalities, determining the marginal cost of controlling emissions by the market price of emissions allowances. Quantification of environmental costs, ensuring consistency among externality sources, and estimation of avoided externality costs are also discussed. Examples are presented of externality values selected in a number of areas of the USA. 11 refs., 5 figs

The external costs of electricity generation: a comparison of generation technologies

Energy Technology Data Exchange (ETDEWEB)

Ozdemiroglu, E [Economics for the Environment Consultancy, London (United Kingdom)

1995-12-01

Electricity generation, like any economic activity, leads to costs that can be grouped in two categories: (a) private or internal and (b) external. Private costs are those paid by the buyers and sellers of energy within the market system. The external costs, however, are not included in the market price mechanism as they accrue to third parties other than the buyer and the seller. External costs include environmental external costs and non-environmental external costs. There are two conditions for the existence of external costs: (a) market failure, or the inability of markets to account for the cost of environmental impacts of energy generation and the market structure and (b) government or policy failure, or the policies that cause private generators to pay either higher or lower costs than they would if these interventions did not exist. A third reason can be added for the existence of non-environmental externalities: energy security, or certain costs faced by society as a result of over-reliance on imported energy. Section A introduces the concept of external costs and benefits. Section B looks at the environmental externalities of energy generation. The procedure is to develop the methodology to estimate what are known as externality adders, i.e. a monetary value for the environmental costs and benefits associated with selected generation technologies, expressed in pence per kilowatt-hour. The result is an `adder` because, in principle, the sum can be added to the private cost of generating electricity to obtain a measure of the `full` or `social` cost. The selected generation technologies are conventional coal, wind power, small-scale hydro, energy crops, incineration of municipal solid waste and energy recovery from landfill. The data reported are based on the application of the technologies in Scotland, but the methodology can be applied anywhere. Section C takes a brief look at the non-environmental externalities including the general theory and evidence

The external costs of electricity generation: a comparison of generation technologies

International Nuclear Information System (INIS)

Ozdemiroglu, E.

1995-01-01

Electricity generation, like any economic activity, leads to costs that can be grouped in two categories: (a) private or internal and (b) external. Private costs are those paid by the buyers and sellers of energy within the market system. The external costs, however, are not included in the market price mechanism as they accrue to third parties other than the buyer and the seller. External costs include environmental external costs and non-environmental external costs. There are two conditions for the existence of external costs: (a) market failure, or the inability of markets to account for the cost of environmental impacts of energy generation and the market structure and (b) government or policy failure, or the policies that cause private generators to pay either higher or lower costs than they would if these interventions did not exist. A third reason can be added for the existence of non-environmental externalities: energy security, or certain costs faced by society as a result of over-reliance on imported energy. Section A introduces the concept of external costs and benefits. Section B looks at the environmental externalities of energy generation. The procedure is to develop the methodology to estimate what are known as externality adders, i.e. a monetary value for the environmental costs and benefits associated with selected generation technologies, expressed in pence per kilowatt-hour. The result is an 'adder' because, in principle, the sum can be added to the private cost of generating electricity to obtain a measure of the 'full' or 'social' cost. The selected generation technologies are conventional coal, wind power, small-scale hydro, energy crops, incineration of municipal solid waste and energy recovery from landfill. The data reported are based on the application of the technologies in Scotland, but the methodology can be applied anywhere. Section C takes a brief look at the non-environmental externalities including the general theory and evidence

Attractive and repulsive quantum forces from dimensionality of space

DEFF Research Database (Denmark)

Bialynicki-Birula, I.; Cirone, M.A.; Dahl, Jens Peder

2002-01-01

Two particles of identical mass attract and repel each other even when there exist no classical external forces and their average relative momentum vanishes. This quantum force depends crucially on the number of dimensions of space.......Two particles of identical mass attract and repel each other even when there exist no classical external forces and their average relative momentum vanishes. This quantum force depends crucially on the number of dimensions of space....

Solar and atmospheric forcing on mountain lakes.

Science.gov (United States)

Luoto, Tomi P; Nevalainen, Liisa

2016-10-01

We investigated the influence of long-term external forcing on aquatic communities in Alpine lakes. Fossil microcrustacean (Cladocera) and macrobenthos (Chironomidae) community variability in four Austrian high-altitude lakes, determined as ultra-sensitive to climate change, were compared against records of air temperature, North Atlantic Oscillation (NAO) and solar forcing over the past ~400years. Summer temperature variability affected both aquatic invertebrate groups in all study sites. The influence of NAO and solar forcing on aquatic invertebrates was also significant in the lakes except in the less transparent lake known to have remained uniformly cold during the past centuries due to summertime snowmelt input. The results suggest that external forcing plays an important role in these pristine ecosystems through their impacts on limnology of the lakes. Not only does the air temperature variability influence the communities but also larger-scale external factors related to atmospheric circulation patterns and solar activity cause long-term changes in high-altitude aquatic ecosystems, through their connections to hydroclimatic conditions and light environment. These findings are important in the assessment of climate change impacts on aquatic ecosystems and in greater understanding of the consequences of external forcing on lake ontogeny. Copyright © 2016 Elsevier B.V. All rights reserved.

Proposed Expansion of German Air Force Operations at Holloman AFB, New Mexico. Final Environmental Impact Statement. Volume III: Comment Letters and Responses to Comments

National Research Council Canada - National Science Library

1998-01-01

The Final Environmental Impact Statement analyzed the potential environmental consequences from the proposal to beddown 30 additional German Air Force Tornado aircraft and 640 personnel at Holloman Air Force Base (AFB) New Mexico...

Impact of seasonal forcing on reactive ecological systems.

Science.gov (United States)

Vesipa, Riccardo; Ridolfi, Luca

2017-04-21

Our focus is on the short-term dynamics of reactive ecological systems which are stable in the long term. In these systems, perturbations can exhibit significant transient amplifications before asymptotically decaying. This peculiar behavior has attracted increasing attention. However, reactive systems have so far been investigated assuming that external environmental characteristics remain constant, although environmental conditions (e.g., temperature, moisture, water availability, etc.) can undergo substantial changes due to seasonal cycles. In order to fill this gap, we propose applying the adjoint non-modal analysis to study the impact of seasonal variations of environmental conditions on reactive systems. This tool allows the transient dynamics of a perturbation affecting non-autonomous ecological systems to be described. To show the potential of this approach, a seasonally forced prey-predator model with a Holling II type functional response is studied as an exemplifying case. We demonstrate that seasonalities can greatly affect the transient dynamics of the system. Copyright © 2017 Elsevier Ltd. All rights reserved.

Study on the measurements and evaluation of environmental external exposure after a nuclear accident

International Nuclear Information System (INIS)

Sakamoto, R.; Saito, K.; Tsutsumi, M.

2001-01-01

Several important issues which affect external exposure in contaminated Chernobyl areas have been investigated using field measurements and computational simulations since 1992. The objectives of the study were: 1) the development of a mobile survey method to collect radiation data over the contaminated wide areas in a shot time; 2) the verification of a method to infer external dose to the population; 3) the provision of basic data used for evaluation of external dose due to gamma ray using a Monte Carlo simulation method. To develop a method to rapidly measure radiation over wide areas and map the extend of fallout, a mobile survey system was constructed and tested; the conversion factors to convert the measured data to required quantities were examined; and finally a detailed contamination map was created. The field surveys were implemented by using a land rover and a helicopter. To infer external dose to inhabitants, radiation measurements were carried out in the living environments using accurate dose meters in addition to individual dose measurements using glass dosimeters. Individual doses were inferred from occupancy factors and dose rate data measured with portable dose rate meters in and around houses. The evaluated doses were compared to directly measured individual doses with glass dosimeters in the seven settlements. A good agreement was observed with an error margin of approximate 20%. Basic data used for the evaluation of environmental gamma-ray dose rate were calculated using a Monte Carlo method. The following two kinds of data have been provided from the calculation: a) conversion factors from the nuclide concentration in the ground to the air kerma rate at 1 m height; and b) shielding factors of a typical Chernobyl house for gamma radiation. (M. Suetake)

Leveraging educational, human resources, and organizational infrastructure to provide solutions to environmental remediation work force problems

International Nuclear Information System (INIS)

Hayward, G.B.; Kinsel, W.

1991-01-01

The field of environmental engineering and environmental science is so new that many colleges and universities have only begun the process of bringing academic program, into their areas. Many professional personnel don't need full degree programs but may need only certain courses to enhance their skills in the environmental area. This article discusses the partnership between the Hanford contractors, DOE-RL, and Washington State University in an innovative way in solving a portion of the remediation work force problems

STRONG POINTS AND INTERNAL AND EXTERNAL VULNERABILITIES OF THE MILITARY COMMUNICATIONS AND INFORMATICS SYSTEMS AND NETWORKS DEVELOPED IN THE ROMANIAN ARMED FORCES UNDER THE CIRCUMSTANCES OF THE CURRENT SECURITY CHALLENGES

Directory of Open Access Journals (Sweden)

Constantin MINCU

2015-12-01

Full Text Available The author briefly presents a series of recent aspects in the current geopolitical context regarding some strong points as well as internal and external vulnerabilities of the military communication and informatics systems and networks developed in the Romanian Armed Forces since 1997. In the second section we referred to the evolutions in austerity and hostility conditions of the main operational and technical sequels of Romanian Armed Forces Transmissions System - STAR (RTP/RMNC. Furthermore, we presented some strong points of the achieved systems and principles taken into account along the modernization and transformation effort (regarding the NATO criteria and requirements, as well as their internal and external vulnerabilities identified following a thorough analysis.

Tracking Dissipation Reduction, Externalities, Stability and Sustainability for Environmental Management of New Orleans

Science.gov (United States)

McNamara, D.; Werner, B. T.

2014-12-01

Sustainability requires stability, but in promoting economic development, modern economies and political systems reduce stabilizing dissipation by facilitating use and management of the environment through engineered mitigation of disturbances, which externalizes dissipation over the short to medium term. To quantitatively investigate the relationship between a range of environmental management approaches and sustainability, and the implications for Earth's future, we track the impact of management strategies on dissipation within the system and its externalities in a numerical model for the coupled economic, political/management and flooding dynamics of New Orleans. The model simulates river floods, hurricane storm-surge-induced floods, subsidence, and agent-based market interactions leading to development of port services, hotels, homes and labor relations. Flood protection decisions for levee construction based on the baseline case of cost-benefit analyses designed to prevent short-term economic loss from future floods qualitatively reproduce historical expansion of New Orleans and increases in levee height. Alternative management strategies explored include majority voting, consensus-based decision-making, and variations in discounting of costs and benefits. Enhanced dissipation is measured relative to optimal economic development without floods. The focus of modern economies on commodification is exploited to track dissipation as a scalar representing value or power, but this approach might not be applicable to more complicated traditional/indigenous cultures or cultures of resistance. For the baseline case, short-to-medium-term reductions in dissipation destabilize the coupled system, resulting in episodic bursts of externalized dissipation during flooding. Comparisons of results for a range of management options and generalizations of this approach for alternative cultural systems will be discussed.

Externalities of fuel cycles 'ExternE' project. Natural gas fuel cycle. Estimation of physical impacts and monetary valuation for priority impact pathways

International Nuclear Information System (INIS)

Holland, M.; Watkiss, P.; Berry, J.; Johnson, C.; Lee, D.

1994-01-01

This document assesses the progress made in quantifying environmental and health damages associated with the natural gas fuel cycle for electricity generation. The methodology developed in the ExternE Project is described in more detail elsewhere (European Commission, 1994a; 1995, in preparation). The reader is referred to these earlier reports for wider discussion of many of the issues underlying this type of work. The increased desire for economic assessment of environmental damage reflects growing awareness of problems such as global warming, ozone depletion and the acidification and nutrification of ecosystems. A wide range of receptors are affected, including human health, forests, crops, and buildings. Such damages are typically not accounted for by the producers and consumers of the good in question (in this case energy). They are thus referred to as 'external costs' or 'externalities', to distinguish them from the private costs which account for the construction of plant, cost of fuel, wages, etc. At the political level there are a variety of reasons for the growing interest in the quantification of the environmental impacts of energy use and the related external costs. These include the need to integrate environmental concerns when selecting between different fuels and energy technologies and the need to evaluate the costs and benefits of stricter environmental standards. These issues are reflected in European Union policy, through, for example, the Maastricht Treaty, the 5th Environmental Action Programme 'towards sustainability', the European Commission's White Paper 'Growth, competitiveness, employment and ways forward to the 21st century' and the establishment of the European Environmental Agency. The proposal for an Energy-Carbon tax is the first concrete proposal by the European Union for the direct use of economic instruments in environmental policy in the energy sector. An agreed methodology for calculation and integration of external costs has not

The Association between Positive Parenting and Externalizing Behavior.

Science.gov (United States)

Boeldt, Debra L; Rhee, Soo Hyun; Dilalla, Lisabeth F; Mullineaux, Paula Y; Schulz-Heik, R Jay; Corley, Robin P; Young, Susan E; Hewitt, John K

2012-01-01

The present study examined the role of positive parenting on externalizing behaviors in a longitudinal, genetically informative sample. It often is assumed that positive parenting prevents behavior problems in children via an environmentally mediated process. Alternatively, the association may be due to either an evocative gene-environment correlation, in which parents react to children's genetically-influenced behavior in a positive way, or a passive gene-environment correlation, where parents passively transmit a risk environment and the genetic risk factor for the behavioral outcome to their children. The present study estimated the contribution of these processes in the association between positive parenting and children's externalizing behavior. Positive parenting was assessed via observations at ages 7, 9, 14, 24, and 36 months and externalizing behaviors were assessed through parent report at ages 4, 5, 7, 9, 10, 11, and 12 years. The significant association between positive parenting and externalizing behavior was negative, with children of mothers who showed significantly more positive parenting during toddlerhood having lower levels of externalizing behavior in childhood; however, there was not adequate power to distinguish whether this covariation was due to genetic, shared environmental, or nonshared environmental influences.

Attentional Focusing Instructions and Force Production

Directory of Open Access Journals (Sweden)

David C Marchant

2011-01-01

Full Text Available Research progress assessing the role of attentional focusing instructions on skill acquisition and performance has lead researchers to apply this approach to force production tasks. Initial converging evidence indicates that force production tasks are sensitive to verbal instruction; externally focused instructions (onto movement outcomes, or onto the object force is being exerted against are shown to be more beneficial than internally focused instructions (focusing attention onto the movements being executed. These benefits are observed for maximal and accurate force production, as well as the maintenance of force production in prolonged tasks. A range of mechanisms are identified supporting the proposal that an external focus promotes movement efficiency in line with energy and effort conservation. Future research is required to assess how this developing body of work interacts with the broader understanding of psychological and physiological factors implicated in the effective production, maintenance and limitation of maximal or sub-maximal forces.

ExternE - valuation of hydro power in Klippen. Final report

International Nuclear Information System (INIS)

Nilsson, Maans

1998-08-01

ExternE is a pan E uropean project aimed at identifying and quantifying external effects from different energy production technologies around Europe. The Swedish implementation carried out case studies on a biomass plant, a coal plant and a hydro power plant. The conventional approach within the ExternE project is to estimate impacts for each priority pathway associated with the fuel cycle, and then economic methods to obtain estimates for the economic damage of each particular impact pathway. However, in the case of hydro power, it is generally not possible to estimate the most important impacts quantitatively. Therefore, a contingent valuation (CV) study was initiated. In a typical CV-study, a selection of individuals are asked to state their willingness to pay for a certain environmental improvement or to avoid an environmental damage. Welfare economic theory suggests that the well-being effects on people from a change from one situation to another can be measured as their willingness to pay or to accept an economic transaction for this change. Environmental services, such as those provided by a river system, are public services and have generally no market price, but the analyst can use people's stated preferences to determine the correct prices of environmental goods and services. The CV study was initiated to obtain an externality value for Klippens Kraftstation. The performed study was of Ex Ante type, which means estimating the values before the exploitation. For this purpose, a site similar to Klippen but without exploitation, was selected: Vojmaan. Three groups of respondents; the local population, the tourists, and the average Swede, were asked to state their perspective on hydro power development their WTP for preserving Vojmaan in its current condition. The results indicate that Locals and Tourists differ significantly from Swedes. The average willingness to pay is calculated from the respondents who absolutely will pay, and those who maybe pay. The

Internal and external force-based impedance control for cooperative manipulation

NARCIS (Netherlands)

Heck, D.J.F.; Kostic, D.; Denasi, A.; Nijmeijer, H.

2013-01-01

An asymptotically stable cascaded control algorithm is proposed for cooperative manipulation of a common object. This algorithm controls motion and internal forces of the object, as well as the contact forces between the object and environment. The motion of each manipulator is controlled using an

Externalities of fuel cycles 'ExternE' project. Economic valuation. Economical valuation: An impact pathway approach

International Nuclear Information System (INIS)

Markandya, A.

1994-01-01

The EC/US study of the external costs of fuel cycles is designed to trace through all the environmental impacts arising from the use of a particular fuel, from the 'cradle' to the 'grave'; to quantify these impacts as far as possible (giving priority to those that are the considered the most important) and to value the damages arising from them in money terms as far as possible (again keeping to the priority listing established by the physical quantification). The fuel cycle has been identified as consisting of the following elements: activities -> emissions/burdens; emissions/burdens -> physical environmental impacts; physical impacts -> external environmental impacts; external impacts -> costs of these impacts. The activities consist of all the operations that are carried out in connection with the extraction transportation, use in electricity generation and finally disposal of the fuel. The emissions or burdens arising from the cycle result in physical impacts, which in turn imply certain environmental impacts. An illustration of a typical fuel cycle (coal) audits environmental impacts is given in Figures. The work of the fuels cycle study teams is to complete the valuation of the shaded areas but giving priority to those impacts that are likely to be quantitatively important. .Each fuel cycle is evaluated in a location-specific context, so that it refers to the impacts arising from the use of coal, or gas or whatever fuel is being considered at an actual plant that is operating. The purpose of this report on economic valuation is to: (a) examine the literature or economic valuation of environmental externalities in Europe; (b) assess its relevance to the fuel cycle study and (c) make recommendations on how the detailed analysis of the individual fuel cycles should use the economic valuation. It is important to recognize that the report is not a complete survey of all the research ever done on environmental valuation. Although as complete a survey of all the

Final Environmental Assessment for Shared Use Paths (SUP), Eglin Air Force Base, Florida

Science.gov (United States)

2011-07-01

social effects...Use Path (SUP)Environmental AssesmentEglin Air Force Base, Florida "/ "/ "/ "/ "/ "/ "/ "/ "/ "/ "/ Eighth StEglin Blvd Memoria l Dr Griffin Way...StEglin Blvd Memoria l Dr Griffin Way Nomad Way Eglin B lvd FL HW Y 8 5 Chinquapin Dr Perimeter Rd VALPARISO Park Tunn el Taxiw ay PT A rea Com miss

Comparison of environmental forcings affecting suspended sediments variability in two macrotidal, highly-turbid estuaries

Science.gov (United States)

Jalón-Rojas, Isabel; Schmidt, Sabine; Sottolichio, Aldo

2017-11-01

The relative contribution of environmental forcing frequencies on turbidity variability is, for the first time, quantified at seasonal and multiannual time scales in tidal estuarine systems. With a decade of high-frequency, multi-site turbidity monitoring, the two nearby, macrotidal and highly-turbid Gironde and Loire estuaries (west France) are excellent natural laboratories for this purpose. Singular Spectrum Analyses, combined with Lomb-Scargle periodograms and Wavelet Transforms, were applied to the continuous multiannual turbidity time series. Frequencies of the main environmental factors affecting turbidity were identified: hydrological regime (high versus low river discharges), river flow variability, tidal range, tidal cycles, and turbulence. Their relative influences show similar patterns in both estuaries and depend on the estuarine region (lower or upper estuary) and the time scale (multiannual or seasonal). On the multiannual time scale, the relative contribution of tidal frequencies (tidal cycles and range) to turbidity variability decreases up-estuary from 68% to 47%, while the influence of river flow frequencies increases from 3% to 42%. On the seasonal time scale, the relative influence of forcings frequencies remains almost constant in the lower estuary, dominated by tidal frequencies (60% and 30% for tidal cycles and tidal range, respectively); in the upper reaches, it is variable depending on hydrological regime, even if tidal frequencies are responsible for up 50% of turbidity variance. These quantifications show the potential of combined spectral analyses to compare the behavior of suspended sediment in tidal estuaries throughout the world and to evaluate long-term changes in environmental forcings, especially in a context of global change. The relevance of this approach to compare nearby and overseas systems and to support management strategies is discussed (e.g., selection of effective operation frequencies/regions, prediction of the most

External apical root resorption concurrent with orthodontic forces: the genetic influence.

Science.gov (United States)

Nieto-Nieto, Nuria; Solano, Jose Enrique; Yañez-Vico, Rosa

2017-05-01

Root resorption is a pathological process of multifactorial origin related to the permanent loss of dental root structure in response to a mechanical, inflammatory, autoimmune or infectious stimulus. External apical root resorption (EARR) is a frequent clinical complication secondary to orthodontic tooth movement; apart from variables related to treatment, environmental factors and/or interindividual genetic variations can confer susceptibility or resistance to its occurrence. In this context, genetic predisposition has been described as an etiological factor, together with mechanical factors derived from orthodontic treatment. In recent years, international research groups have determined the degree of influence of some genetic biomarkers in defining increased/reduced susceptibility to postorthodontic EARR. The influences of the IL1 gene cluster (IL1B, IL1A, IL1RN, IL6), P2RX7, CASP1, OPG (TNFRSF11B), RANK (TNFRSF11A), Osteopontin (OPN), TNFα, the vitamin D receptor (TaqI), TNSALP and IRAK1 have been analyzed. The objective of the present review study was to compile and analyze the latest information about the genetic background predisposing to EARR during orthodontic treatment. Genetics-based studies along with other basic science research in the field might help to clarify the exact nature of EARR, the influence of genetic inheritance and possibly lead to the prevention or even eradication of this phenomenon during orthodontic treatment.

Force control for mechanoinduction of impedance variation in cellular organisms

International Nuclear Information System (INIS)

Nam, Joo Hoo; Chen, Peter C Y; Lu, Zhe; Luo, Hong; Lin, Wei; Ge, Ruowen

2010-01-01

Constantly exposed to various forms of mechanical forces inherent in their physical environment (such as gravity, stress induced by fluid flow or cell–cell interactions, etc), cellular organisms sense such forces and convert them into biochemical signals through the processes of mechanosensing and mechanotransduction that eventually lead to biological changes. The effect of external forces on the internal structures and activities in a cellular organism may manifest in changes its physical properties, such as impedance. Studying variation in the impedance of a cellular organism induced by the application of an external mechanical force represents a meaningful endeavor (from a biosystems perspective) in exploring the complex mechanosensing and mechanotransduction mechanisms that govern the behavior of a cellular organism under the influence of external mechanical stimuli. In this paper we describe the development of an explicit force-feedback control system for exerting an indentation force on a cellular organism while simultaneously measuring its impedance. To demonstrate the effectiveness of this force-control system, we have conducted experiments using zebrafish embryos as a test model of a cellular organism. We report experimental results demonstrating that the application of a properly controlled external force leads to a significant change in the impedance of a zebrafish embryo. These results offer support for a plausible explanation that activities of pore canals in the chorion are responsible for the observed change in impedance.

Internal and external North Atlantic Sector variability in the Kiel climate model

Energy Technology Data Exchange (ETDEWEB)

Latif, Mojib; Park, Wonsun; Ding, Hui; Keenlyside, Noel S. [Leibniz-Inst. fuer Meereswissenschaften, Kiel (Germany)

2009-08-15

The internal and external North Atlantic Sector variability is investigated by means of a multimillennial control run and forced experiments with the Kiel Climate Model (KCM). The internal variability is studied by analyzing the control run. The externally forced variability is investigated in a run with periodic millennial solar forcing and in greenhouse warming experiments with enhanced carbon dioxide concentrations. The surface air temperature (SAT) averaged over the Northern Hemisphere simulated in the control run displays enhanced variability relative to the red background at decadal, centennial, and millennial timescales. Special emphasis is given to the variability of the Meridional Overturning Circulation (MOC). The MOC plays an important role in the generation of internal climate modes. Furthermore, the MOC provides a strong negative feedback on the Northern Hemisphere SAT in both the solar and greenhouse warming experiments, thereby moderating the direct effects of the external forcing in the North Atlantic. The implications of the results for decadal predictability are discussed. (orig.)

ExternE: Externalities of energy Vol. 2. Methodology

International Nuclear Information System (INIS)

Berry, J.; Holland, M.; Watkiss, P.

1995-01-01

This report describes the methodology used by the ExternE Project of the European Commission (DGXII) JOULE Programme for assessment of the external costs of energy. It is one of a series of reports describing analysis of nuclear, fossil and renewable fuel cycles for assessment of the externalities associated with electricity generation. Part I of the report deals with analysis of impacts, and Part II with the economic valuation of those impacts. Analysis is conducted on a marginal basis, to allow the effect of an incremental investment in a given technology to be quantified. Attention has been paid to the specificity of results with respect to the location of fuel cycle activities, the precise technologies used, and the type and source of fuel. The main advantages of this detailed approach are as follows: It takes full and proper account of the variability of impacts that might result from different power projects; It is more transparent than analysis based on hypothetically 'representative' cases for each of the different fuel cycles; It provides a framework for consistent comparison between fuel cycles. A wide variety of impacts have been considered. These include the effects of air pollution on the natural and human environment, consequences of accidents in the workplace, impacts of noise and visual intrusion on amenity, and the effects of climate change arising from the release of greenhouse gases. Wherever possible we have used the 'impact pathway' or 'damage function' approach to follow the analysis from identification of burdens (e.g. emissions) through to impact assessment and then valuation in monetary terms. This has required a detailed knowledge of the technologies involved, pollutant dispersion, analysis of effects on human and environmental health, and economics. In view of this the project brought together a multi-disciplinary team with experts from many European countries and the USA. The spatial and temporal ranges considered in the analysis are

The Association between Positive Parenting and Externalizing Behavior1

Science.gov (United States)

Boeldt, Debra L.; Rhee, Soo Hyun; DiLalla, Lisabeth F.; Mullineaux, Paula Y.; Schulz-Heik, R. Jay; Corley, Robin P.; Young, Susan E.; Hewitt, John. K.

2011-01-01

The present study examined the role of positive parenting on externalizing behaviors in a longitudinal, genetically informative sample. It often is assumed that positive parenting prevents behavior problems in children via an environmentally mediated process. Alternatively, the association may be due to either an evocative gene-environment correlation, in which parents react to children’s genetically-influenced behavior in a positive way, or a passive gene-environment correlation, where parents passively transmit a risk environment and the genetic risk factor for the behavioral outcome to their children. The present study estimated the contribution of these processes in the association between positive parenting and children’s externalizing behavior. Positive parenting was assessed via observations at ages 7, 9, 14, 24, and 36 months and externalizing behaviors were assessed through parent report at ages 4, 5, 7, 9, 10, 11, and 12 years. The significant association between positive parenting and externalizing behavior was negative, with children of mothers who showed significantly more positive parenting during toddlerhood having lower levels of externalizing behavior in childhood; however, there was not adequate power to distinguish whether this covariation was due to genetic, shared environmental, or nonshared environmental influences. PMID:22577341

Effect of a food waste disposer policy on solid waste and wastewater management with economic implications of environmental externalities.

Science.gov (United States)

Maalouf, Amani; El-Fadel, Mutasem

2017-11-01

In this study, the carbon footprint of introducing a food waste disposer (FWD) policy was examined in the context of its implications on solid waste and wastewater management with economic assessment of environmental externalities emphasizing potential carbon credit and increased sludge generation. For this purpose, a model adopting a life cycle inventory approach was developed to integrate solid waste and wastewater management processes under a single framework and test scenarios for a waste with high organic food content typical of developing economies. For such a waste composition, the results show that a FWD policy can reduce emissions by nearly ∼42% depending on market penetration, fraction of food waste ground, as well as solid waste and wastewater management schemes, including potential energy recovery. In comparison to baseline, equivalent economic gains can reach ∼28% when environmental externalities including sludge management and emissions variations are considered. The sensitivity analyses on processes with a wide range in costs showed an equivalent economic impact thus emphasizing the viability of a FWD policy although the variation in the cost of sludge management exhibited a significant impact on savings. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmental policy (Republic of Macedonia)

International Nuclear Information System (INIS)

1997-01-01

With a defined set of policy goals, policy makers face an important decision on how and at what cost to the economy environmental compliance can be achieved. The costs of environmental compliance for Macedonia are still to be determined. However, environmental cost estimates, even those done with the highest degree of precision will not provide the actual burden that the society will face. The level of actual costs and their distribution in the economy will depend on the type of instruments that will be used by policy makers. In general, there are two policy options to be considered, namely command and control which relies on administrative instruments and market based which uses economic instrument. The command and control based environmental policy requires that ambient standards, emission standards and new source performance standards are in place, together with a permitting system and compliance monitoring to ensure enforcement. A market based environmental policy aims at achieving higher levels of environmental quality by correcting the imperfections of the market. This is done by what is called internalizing negative environmental externalities. In simple words, polluters are forced to pay a pollution charge or a tax and include the costs of pollution in the costs of production and finally in the prices of goods. (author)

Stability diagram for the forced Kuramoto model.

Science.gov (United States)

Childs, Lauren M; Strogatz, Steven H

2008-12-01

We analyze the periodically forced Kuramoto model. This system consists of an infinite population of phase oscillators with random intrinsic frequencies, global sinusoidal coupling, and external sinusoidal forcing. It represents an idealization of many phenomena in physics, chemistry, and biology in which mutual synchronization competes with forced synchronization. In other words, the oscillators in the population try to synchronize with one another while also trying to lock onto an external drive. Previous work on the forced Kuramoto model uncovered two main types of attractors, called forced entrainment and mutual entrainment, but the details of the bifurcations between them were unclear. Here we present a complete bifurcation analysis of the model for a special case in which the infinite-dimensional dynamics collapse to a two-dimensional system. Exact results are obtained for the locations of Hopf, saddle-node, and Takens-Bogdanov bifurcations. The resulting stability diagram bears a striking resemblance to that for the weakly nonlinear forced van der Pol oscillator.

New directions in Mexican environmental policy

Science.gov (United States)

Mumme, Stephen P.; Sanchez, Roberto A.

1992-07-01

Since taking office 1 December 1988, Mexico's incumbent president, Carlos Salinas de Gortari, has introduced important innovations in environmental policy that distinguish his administration from those of his predecessors. Greater administrative continuity, improved regulatory capacity achieved through statutory change, focused priorities centering on pollution abatement in Mexico City, and an aggressive search for external financing for pollution control are hallmarks of Salinas' approach. The success of these environmental reforms depends heavily on economic recovery, however, and environmental policy still suffers from underfunding, bureaucratic fragmentation, and heavy reliance on voluntarist enforcement mechanisms. Recently, U.S. congressional debate on a proposed free trade agreement with Mexico has been a factor in spurring the Salinas government to take new antipollution and conservation measures. Mexico's growing environmental movement is also an important force behind the government's new responsiveness in environmental matters. The Salinas administration recognizes the issue's political salience and has sought to defuse environmental criticism using a large arsenal of resources at its disposal. Salinas' environmental policy strategy may thus be characterized as both proactive and reactive in nature. While the reforms are evidence that Mexico is beginning to take environmental matters more seriously, economic recovery and sustained environmental activism remain vital to further progress.

Biomechanical aspects of external root resorption in orthodontic therapy

OpenAIRE

Abuabara, Allan

2007-01-01

External apical root resorption is a common phenomenon associated with orthodontic treatment. The factors relevant to root resorption can be divided into biological and mechanical factors. Some mechanical and biological factors might be associated with an increased or decreased risk of root resorption during orthodontic treatment. For mechanical factors, the extensive tooth movement, root torque and intrusive forces, movement type, orthodontic force magnitude, duration and type of force a...

Current Reversal Due to Coupling Between Asymmetrical Driving Force and Ratchet Potential

International Nuclear Information System (INIS)

Ai Baoquan; Xie Huizhang; Liu Lianggang

2006-01-01

Transport of a Brownian particle moving in a periodic potential is investigated in the presence of an asymmetric unbiased external force. The asymmetry of the external force and the asymmetry of the potential are the two ways of inducing a net current. It is found that the competition of the spatial asymmetry of potential with the temporal asymmetry of the external force leads to the phenomena like current reversal. The competition between the two opposite driving factors is a necessary but not a sufficient condition for current reversals.

Settlement behavior of municipal solid waste due to internal and external environmental factors in a lysimeter.

Science.gov (United States)

Melo, Márcio C; Caribé, Rômulo M; Ribeiro, Libânia S; Sousa, Raul B A; Monteiro, Veruschka E D; de Paiva, William

2016-12-05

Long-term settlement magnitude is influenced by changes in external and internal factors that control the microbiological activity in the landfill waste body. To improve the understanding of settlement phenomena, it is instructive to study lysimeters filled with MSW. This paper aims to understand the settlement behavior of MSW by correlating internal and external factors that influence waste biodegradation in a lysimeter. Thus, a lysimeter was built, instrumented and filled with MSW from the city of Campina Grande, the state of Paraíba, Brazil. Physicochemical analysis of the waste (from three levels of depth of the lysimeter) was carried out along with MSW settlement measurements. Statistical tools such as descriptive analysis and principal component analysis (PCA) were also performed. The settlement/compression, coefficient of variation and PCA results indicated the most intense rate of biodegradation in the top layer. The PCA results of intermediate and bottom levels presented fewer physicochemical and meteorological variables correlated with compression data in contrast with the top layer. It is possible to conclude that environmental conditions may influence internal indicators of MSW biodegradation, such as the settlement.

Evaluating external costs of human health and environmental impacts using IAEA model SIMPACTS

International Nuclear Information System (INIS)

Bobric, Elena; Jelev, Adrian

2005-01-01

SIMPACTS (Simplified Approach for Estimating Impacts and External Costs of Electricity Generation) model developed at the International Atomic Energy Agency is a powerful and convenient tool for evaluating external costs induced by different energy sources. The model was developed for industrial countries and for developing countries as well where studies of alternatives of sustainable energy policies are conducted. The SIMPACTS allow the decision making factors involved in energy policy to have reasonable estimates of environment impacts and relating costs appealing to a rather low number of input parameters. The paper aims at analyzing by means of SIMPACTS the environmental impact produced by Cernavoda NPP operation in two cases: a) the impact of the Cernavoda NPP itself; b) the impact of an hypothetical coal based power plant of the same power level and located on the Cernavoda NPP site. The SIMPACTS modules AIRPACTS and NUCPACTS were applied to assess the impacts on human health, agricultural crops and building materials from exposure to routine atmospheric emissions and as well to quantify and value the adverse effects on human health due to routine atmospheric release of radionuclides from the NPP, via radioactive waste ground disposal or resulting from accidents in nuclear facility, respectively. The conclusion of this study based on SIMPACTS model application to assess the health effects and damage cost per year is that the Cernavoda NPP presents the lower health effects and damage cost comparing with power plants of other types

Inferring Interaction Force from Visual Information without Using Physical Force Sensors.

Science.gov (United States)

Hwang, Wonjun; Lim, Soo-Chul

2017-10-26

In this paper, we present an interaction force estimation method that uses visual information rather than that of a force sensor. Specifically, we propose a novel deep learning-based method utilizing only sequential images for estimating the interaction force against a target object, where the shape of the object is changed by an external force. The force applied to the target can be estimated by means of the visual shape changes. However, the shape differences in the images are not very clear. To address this problem, we formulate a recurrent neural network-based deep model with fully-connected layers, which models complex temporal dynamics from the visual representations. Extensive evaluations show that the proposed learning models successfully estimate the interaction forces using only the corresponding sequential images, in particular in the case of three objects made of different materials, a sponge, a PET bottle, a human arm, and a tube. The forces predicted by the proposed method are very similar to those measured by force sensors.

The application of external vibration monitoring to reactors with concrete pressure vessels

International Nuclear Information System (INIS)

Hammill, W.J.

1979-01-01

The application of external vibration monitoring techniques to advanced gas cooled reactors (AGR) which have concrete pressure vessels is considered. A monitoring system for a particular AGR coolant circuit structure is developed, whose primary objective is to detect impacting of two components, although the detection of forced vibration response is also considered. Experimental results from instrumented components in the reactor and data from rig tests on full size units have been used together with a mathematical model of some elements of the transmission path in order to establish its dynamic characteristics and relate internal component vibration to externally measured signals. The application of external vibration monitoring to the external detection of the forced vibration response of an internal reactor assembly and the remote monitoring of circulator sound output is discussed. (author)

Recent drying of the Fertile Crescent: natural or externally forced?

Science.gov (United States)

Kelley, Colin

2014-05-01

There has been a reduction in observed precipitation over the greater Mediterranean region since the middle of the 20th Century. Recent studies suggest that while anthropogenic forcing has already begun to assert itself in recent decades, the preponderance of the winter drying trend is attributable to the large natural multidecadal variability of the North Atlantic Oscillation (NAO), while over the eastern Mediterranean, the anthropogenic, or forced drying signal is more clearly evident. This forced drying is projected to increase during the 21st Century according to the newest global climate models and this aridification would present significant challenges for a region that is already water-stressed. Although the Fertile Crescent is historically known for its agricultural prosperity, the severity and persistence of the recent multiyear drought in Syria, directly prior to the 2011 uprising there, leads us to ask whether this is evidence of emerging global warming influence. This drought exacerbated existing water insecurity, resulting in an agricultural collapse and a mass migration of rural drought refugees to the urban areas in Syria's west. This migration followed the previous influx of Iragi refugees and combined with strong natural population growth to place a severe strain on resources. Here we examine observations of precipitation and temperature, both gridded and stations, along with simulations and projections from the newest global climate models, to estimate the forced contribution to the recent Syrian drought, and assess the uncertainty in future drying according to the models. We find that this region has experienced a long-term downward trend in precipitation, and a concomitant increase in temperature, serving to further dry the soil, and in surface pressure. We find that the shift in the distributions of three-year running means of surface pressure and precipitation due to the forcing make severe events such as the recent Syrian drought several

Environmental protection

International Nuclear Information System (INIS)

Hull, A.P.

1979-01-01

Environmental Studies and Internal Dosimetry projects include: Environmental Protection; 1977 Environmental Monitoring Report; Sewage Sludge Disposal on the Sanitary Landfill; Radiological Analyses of Marshall Islands Environmental Samples, 1974 to 1976; External Radiation Survey and Dose Predictions for Rongelap, Utirik, Rongerik, Ailuk, and Wotje Atolls; Marshall Islands - Diet and Life Style Study; Dose Reassessment for Populations on Rongelap and Utirik Following Exposure to Fallout from BRAVO Incident (March 1, 1954); Whole Body Counting Results from 1974 to 1979 for Bikini Island Residents; Dietary Radioactivity Intake from Bioassay Data, a Model Applied to 137 Cs Intake by Bikini Island Residents; and External Exposure Measurements at Bikini Atoll

External costs of material recycling strategies for fusion power plants

International Nuclear Information System (INIS)

Hallberg, B.; Aquilonius, K.; Lechon, Y.; Cabal, H.; Saez, R.M.; Schneider, T.; Lepicard, S.; Ward, D.; Hamacher, T.; Korhonen, R.

2003-01-01

This paper is based on studies performed within the framework of the project Socio-Economic Research on Fusion (SERF3). Several fusion power plant designs (SEAFP Models 1-6) were compared focusing on part of the plant's life cycle: environmental impact of recycling the materials. Recycling was considered for materials replaced during normal operation, as well as materials from decommissioning of the plant. Environmental impact was assessed and expressed as external cost normalised with the total electrical energy output during plant operation. The methodology used for this study has been developed by the Commission of the European Union within the frame of the ExternE project. External costs for recycling, normalised with the energy production during plant operation, are very low compared with those for other energy sources. Results indicate that a high degree of recycling is preferable, at least when considering external costs, because external costs of manufacturing of new materials and disposal costs are higher

Report on Adaptive Force, a specific neuromuscular function

Directory of Open Access Journals (Sweden)

Marko Hoff

2015-08-01

Full Text Available In real life motions, as well as in sports, the adaptation of the neuromuscular systems to externally applied forces plays an important role. The term Adaptive Force (AF shall characterize the ability of the nerve-muscle-system to adapt to impacting external forces during isometric and eccentric muscle action. The focus in this paper is on the concept of this neuromuscular action, which is not yet described in this way. A measuring system was constructed and evaluated for this specific neuromuscular function, but only the main information of the evaluation of the measuring system and the preliminary reference values are mentioned here, while an article with detailed description will be published separately. This paper concentrates on the three following points: 1 What is the peculiarity of this neuromuscular function, introduced as AF? 2 Is the measuring system able to capture its specific characteristics and which phases of measurement occur? 3 It seems reasonable to discuss if AF can be distinguished and classified among the known force concepts. The article describes the measuring system and how it is able to capture special features of real life motions like submaximal intensities and the subjects’ option to react adequately on external varying forces. Furthermore, within one measurement the system records three different force qualities: the isometric submaximal Adaptive Force (AFiso, the maximal isometric Adaptive Force (AFisomax and the maximal eccentric Adaptive Force (AFeccmax. Each of these phases provide different and unique information on the nerve-muscle-system that are discussed in detail. Important, in terms of the Adaptive Force, seems to be the combination of conditional and coordinative abilities.

Shear behavior of concrete beams externally prestressed with Parafil ropes

Directory of Open Access Journals (Sweden)

A.H. Ghallab

2013-03-01

Full Text Available Although extensive work has been carried out investigating the use of external prestressing system for flexural strengthening, a few studies regarding the shear behavior of externally prestressed beams can be found. Five beams, four of them were externally strengthened using Parafil rope, were loaded up to failure to investigate the effect of shear span/depth ratio, external prestressing force and concrete strength on their shear behavior. Test results showed that the shear span to depth ratio has a significant effect on both the shear strength and failure mode of the strengthened beams and the presence of external prestressing force increased the ultimate load of the tested beams by about 75%. Equations proposed by different codes for both the conventional reinforced concrete beams and for ordinary prestressed beams were used to evaluate the obtained experimental results. In general, codes equations showed a high level of conservatism in predicting the shear strength of the beams. Also, using the full strength rather than half of the concrete shear strength in the Egyptian code PC-method improves the accuracy of the calculated ultimate shear strength.

Issues and major steps in a conceptual framework for environmental costing

International Nuclear Information System (INIS)

DePape, D.; Kristjanson, E.R.; Onyebuchi, E.I.; Wojczynski, E.

1992-01-01

The concept of applying monetary values to environmental consequences as a means of integrating environmental considerations into utility resource planning is explored. The need for estimation and integration of environmental costs and benefits is becoming more important due to public concern over environmental degradation, rapidly increasing costs of mitigating environmental damage, increased liability for compensation for such damage, pressures to consider environmental externalities, and a corporate desire to operate responsibly. Manitoba Hydro established a task force to develop general approaches and specific techniques for evaluation and integration of environmental costs and benefits into utility planning. The utility's conceptual framework for monetizing and integrating environmental costs and benefits is described, including identification of potential environmental impacts, evaluation of environmental impacts, estimation of monetary and non-monetary costs and benefits, and integration of these costs and benefits into the resource planning process. Key issues that must be addressed to implement this conceptual framework include the need for earlier environmental impact assessments and the need for mitigation and compensation prediction methodologies. 1 fig., 1 tab

Observing human movements helps decoding environmental forces.

Science.gov (United States)

Zago, Myrka; La Scaleia, Barbara; Miller, William L; Lacquaniti, Francesco

2011-11-01

Vision of human actions can affect several features of visual motion processing, as well as the motor responses of the observer. Here, we tested the hypothesis that action observation helps decoding environmental forces during the interception of a decelerating target within a brief time window, a task intrinsically very difficult. We employed a factorial design to evaluate the effects of scene orientation (normal or inverted) and target gravity (normal or inverted). Button-press triggered the motion of a bullet, a piston, or a human arm. We found that the timing errors were smaller for upright scenes irrespective of gravity direction in the Bullet group, while the errors were smaller for the standard condition of normal scene and gravity in the Piston group. In the Arm group, instead, performance was better when the directions of scene and target gravity were concordant, irrespective of whether both were upright or inverted. These results suggest that the default viewer-centered reference frame is used with inanimate scenes, such as those of the Bullet and Piston protocols. Instead, the presence of biological movements in animate scenes (as in the Arm protocol) may help processing target kinematics under the ecological conditions of coherence between scene and target gravity directions.

External costs from electricity generation of China up to 2030 in energy and abatement scenarios

International Nuclear Information System (INIS)

Zhang, Qingyu; Weili, Tian; Yumei, Wei; Yingxu, Chen

2007-01-01

This paper presents estimated external costs of electricity generation in China under different scenarios of long-term energy and environmental policies. Long-range Energy Alternatives Planning (LEAP) software is used to develop a simple model of electricity demand and to estimate gross electricity generation in China up to 2030 under these scenarios. Because external costs for unit of electricity from fossil fuel will vary in different government regulation periods, airborne pollutant external costs of SO 2 , NO x , PM 10 , and CO 2 from fired power plants are then estimated based on emission inventories and environmental cost for unit of pollutants, while external costs of non-fossil power generation are evaluated with external cost for unit of electricity. The developed model is run to study the impact of different energy efficiency and environmental abatement policy initiatives that would reduce total energy requirement and also reduce external costs of electricity generation. It is shown that external costs of electricity generation may reduce 24-55% with three energy policies scenarios and may further reduce by 20.9-26.7% with two environmental policies scenarios. The total reduction of external costs may reach 58.2%. (author)

Quantifying Third-Party Impacts and Environmental Externalities from a Cap-And-Trade System for Groundwater Management

Science.gov (United States)

Khan, H. F.; Yang, Y. C. E.; Brown, C.

2016-12-01

Economic decision models, such as the cap-and-trade system, have been shown to be useful in the context of groundwater management. A uniformly applied cap-and-trade system can however result in significant spatially and temporally varying hydrogeologic impacts that reduce public welfare. Hydrological challenges associated with the cap-and-trade system for groundwater management include establishing appropriate system boundaries, setting system-wide sustainable yield and limiting third party impacts from extractions. Given these challenges, these economic models need to be supplemented with physically based hydrogeologic models that are able to represent the spatial and temporal heterogeneity in conditions across a region. This investigation assesses third-party impacts and environmental externalities resulting from a cap-and-trade system in a sub-basin of the Republican River Basin, overlying the Ogallala aquifer in the High Plains of the United States. The economic model is coupled with a calibrated physically based groundwater model. The cap-and-trade system is developed using a multi-agent system model where individual benefits of each self-interested agent are maximized subject to bounds on irrigation requirements and water use permits. We then compare the performance of the cap-and-trade system with a smart groundwater market which, in addition to a cap on total groundwater extraction, also incorporates streamflow constraints. The results quantify third-party impacts and environmental externalities resulting from uncontrolled trading. This analysis demonstrates the value added by a well-designed cap-and-trade system able to account for basin-wide heterogeneity in hydrogeologic and ecological conditions by establishing trading limits, managing inter-area transfers and setting exchange rates for permit trading.

Externalities of fuel cycles 'ExternE' project. Wind fuel cycle. Estimation of physical impacts and monetary valuation for priority impact pathways

International Nuclear Information System (INIS)

Eyre, N.

1994-01-01

Fuel cycle externalities are the costs imposed on society and the environment that are not accounted for by the producers and consumers of energy. They include physical damage to natural and built environment as well as impacts on recreation, amenity, aesthetics and other contributors to individual utility. Traditional economic assessment of fuel cycles has ignored these effects and the energy sector is consequently distorted in favour of technologies with significant environmental impacts. Concern over widespread degradation of the environment resulting from the major electricity generating fuel cycle emissions has mounted since the early 1970s. The impacts of acidifying pollutants and ozone precursors have been studied extensively. More recently, the accumulation of greenhouse gases in the atmosphere and the consequential changes to the Earth's climate have caused even more concern. At the same time, the environmental problems of nuclear power - ionising radiation, catastrophic consequences of accidents and unresolved problems of storing highly active waste - have increasingly been recognised. Electricity generation based on renewable energy sources is generally considered to be more environmentally benign, because the major pollution effects of the fossil fuel and nuclear fuel cycles are avoided. However, even the renewables are not impact free, although the impacts tend to be more local in character. This report evaluates in detail the environmental impacts, and their costs, of one of those sources - wind energy. It is the first attempt at a comprehensive assessment of the monetary values of the environmental impacts of wind energy. Although the theoretical basis for including external costs in decision making processes is well understood, an acceptable methodology for their calculation and integration has not been established. The studies of Hohmeyer (1988) and Ottinger et al (1990) are examples of attempts to calculate the environmental externalities of

External costs of nuclear-generated electricity

International Nuclear Information System (INIS)

Rotaru, I.; Glodeanu, F.; Popescu, D.; Andrei, V.

2004-01-01

External costs of nuclear power include: future financial liabilities arising from decommissioning and dismantling of nuclear facilities, health and environmental impacts of radioactivity releases in routine operation, radioactive waste disposal and effects of severe accidents. The nuclear energy industry operates under regulations that impose stringent limits to atmospheric emissions and liquid effluents from nuclear facilities as well as requiring the containment and confinement of solid radioactive waste to ensure its isolation from the biosphere as long as it may be harmful for human health and the environment. The capital and operating costs of nuclear power plants and fuel cycle facilities already internalize a major portion of the above-mentioned potential external costs, and these are reflected in the prices paid by consumers of nuclear-generated electricity. The externality related to potential health and environmental impacts of radioactive releases during routine operations have been assessed in a large number of comprehensive studies, in particular the ExternE project that was created in the framework of the European Commission. With regard to effects of severe nuclear accidents, a special legal regime, the third-party liability system, has been implemented to provide limited third party liability coverage in the event of a nuclear accident. The nuclear plant owners are held liable for some specified first substantial part of damages to third parties, and must secure insurance coverage adequate to cover this part. The Government provides coverage for some specified substantial second part of the damages, with any remaining damages to be considered by the national legislation. Thus, the costs of an incident or accident are fully internalized in the costs borne by the nuclear plant owners. Externalities of energy are not limited to environmental and health related impacts, but may result also from macro-economic, policy or strategic factors not reflected

Assessment of Environmental External Effects in Power Generation

DEFF Research Database (Denmark)

Meyer, Henrik Jacob; Morthorst, Poul Erik; Ibsen, Liselotte Schleisner

1996-01-01

to the production of electricity based on a coal fired conventional plant. In the second case heat/power generation by means of a combined heat and power plant based on biomass-generated gas is compared to that of a combined heat and power plant fuelled by natural gas.In the report the individual externalities from...

Renewable energy: Externality costs as market barriers

International Nuclear Information System (INIS)

Owen, Anthony D.

2006-01-01

This paper addresses the impact of environmentally based market failure constraints on the adoption of renewable energy technologies through the quantification in financial terms of the externalities of electric power generation, for a range of alternative commercial and almost-commercial technologies. It is shown that estimates of damage costs resulting from combustion of fossil fuels, if internalised into the price of the resulting output of electricity, could lead to a number of renewable technologies being financially competitive with generation from coal plants. However, combined cycle natural gas technology would have a significant financial advantage over both coal and renewables under current technology options and market conditions. On the basis of cost projections made under the assumption of mature technologies and the existence of economies of scale, renewable technologies would possess a significant social cost advantage if the externalities of power production were to be 'internalised'. Incorporating environmental externalities explicitly into the electricity tariff today would serve to hasten this transition process. (author)

Lactate and force production in skeletal muscle

DEFF Research Database (Denmark)

Kristensen, Michael; Albertsen, Janni; Rentsch, Maria

2005-01-01

Lactic acid accumulation is generally believed to be involved in muscle fatigue. However, one study reported that in rat soleus muscle (in vitro), with force depressed by high external K+ concentrations a subsequent incubation with lactic acid restores force and thereby protects against fatigue...

Main problems of external monitoring in the accidental zone

International Nuclear Information System (INIS)

Gavrikov, O.K.; Gul'din, A.N.; Komarov, V.I.; Malkov, V.L.; Smirnov, N.V.; Sukhoruchkin, A.K.; Proskuryakov, A.G.

1989-01-01

Operational experience of the external monitoring service during emergency response is analysed as applied to the problems of optimization of environmental monitoring under accidental conditions. Problems of rapid and strategical environmental radiation monitoring are considered

Are there SO2 externality costs beyond the Clean Air Act Amendments of 1990?

International Nuclear Information System (INIS)

Sanghi, A.; Joseph, A.L.

1992-01-01

Inclusion of environmental externality costs in the selection of utility resources has become a reality in New York, Massachusetts, Nevada and California. Soon several other jurisdictions are likely to join these states in using environmental externality costs in decision-making. The consideration of environmental externalities are bound to profoundly affect utility decision-making in the future. So far attention has focused largely on air emission externalities of SO 2 , NO x and CO 2 . However, the recent Clean Air Act Amendments (CAAA) will reduce SO 2 emissions from utilities by about 50 percent. With such a large reduction in SO 2 loading, the question has been raised as to the need to further consider SO 2 externality costs in decision-making. This paper comments on this issue. By using generation and emission data from New York utilities, the paper shows that SO 2 emission externalities exist even after complying with requirements of the CAAA

Estimate on external effective doses received by the Iranian population from environmental gamma radiation sources

Energy Technology Data Exchange (ETDEWEB)

Roozitalab, J.; Reza deevband, M.; Rastkhah, N. [National Radiation Protection Dept. Atomic Energy Organization (Iran, Islamic Republic of); Sohrabi, M. [Intenatinal atomic Energy Agency, Vienna (Austria)

2006-07-01

Concentration of natural radioactive materials, especially available U 238, Ra 226, Th 232, and K 40 in construction materials and soil, as well as absorb dose from cosmic rays, is the most important source of the people for effective doses from the environment radiation. In order to evaluate external effective dose, it has been carried out more than 1000 measurements in 36 cities by sensitive dosimeters to environmental gamma radiation for indoor and outdoor conditions in residential areas; which its results show that range of gamma exposure for inside of buildings in Iran is 8.7-20.5 {mu}R/h, and outdoor environments of different cities is 7.9-20.6 {mu}R/h, which their mean value are 14.33 and 12.62 {mu}R/h respectively. Meanwhile, it has been estimated that beam-absorbing ratio between indoor and outdoor in measured environments is 1.55, except contribution of cosmic rays. This studies show that average effective dose for each Iranian person from environmental gamma is 96.9 n Sv/h, and annually effective dose for every person is 0.848 mSv. (authors)

Estimate on external effective doses received by the Iranian population from environmental gamma radiation sources

International Nuclear Information System (INIS)

Roozitalab, J.; Reza deevband, M.; Rastkhah, N.; Sohrabi, M.

2006-01-01

Concentration of natural radioactive materials, especially available U 238, Ra 226, Th 232, and K 40 in construction materials and soil, as well as absorb dose from cosmic rays, is the most important source of the people for effective doses from the environment radiation. In order to evaluate external effective dose, it has been carried out more than 1000 measurements in 36 cities by sensitive dosimeters to environmental gamma radiation for indoor and outdoor conditions in residential areas; which its results show that range of gamma exposure for inside of buildings in Iran is 8.7-20.5 μR/h, and outdoor environments of different cities is 7.9-20.6 μR/h, which their mean value are 14.33 and 12.62 μR/h respectively. Meanwhile, it has been estimated that beam-absorbing ratio between indoor and outdoor in measured environments is 1.55, except contribution of cosmic rays. This studies show that average effective dose for each Iranian person from environmental gamma is 96.9 n Sv/h, and annually effective dose for every person is 0.848 mSv. (authors)

Source evaluation report phase 2 investigation: Limited field investigation. Final report: United States Air Force Environmental Restoration Program, Eielson Air Force Base, Alaska

Energy Technology Data Exchange (ETDEWEB)

1994-10-01

This report describes the limited field investigation work done to address issues and answer unresolved questions regarding a collection of potential contaminant sources at Eielson Air Force Base (AFB), near Fairbanks, Alaska. These sources were listed in the Eielson AFB Federal Facility Agreement supporting the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) cleanup of the base. The limited field investigation began in 1993 to resolve all remaining technical issues and provide the data and analysis required to evaluate the environmental hazard associated with these sites. The objective of the limited field investigation was to allow the remedial project managers to sort each site into one of three categories: requiring remedial investigation/feasibility study, requiring interim removal action, or requiring no further remedial action.

The influence of environmental forcing on biodiversity and extinction in a resource competition model.

Science.gov (United States)

Vakulenko, Sergey A; Sudakov, Ivan; Mander, Luke

2018-03-01

In this paper, we study a model of many species that compete, directly or indirectly, for a pool of common resources under the influence of periodic, stochastic, and/or chaotic environmental forcing. Using numerical simulations, we find the number and sequence of species going extinct when the community is initially packed with a large number of species of random initial densities. Thereby, any species with a density below a given threshold is regarded to be extinct.

The influence of environmental forcing on biodiversity and extinction in a resource competition model

Science.gov (United States)

Vakulenko, Sergey A.; Sudakov, Ivan; Mander, Luke

2018-03-01

In this paper, we study a model of many species that compete, directly or indirectly, for a pool of common resources under the influence of periodic, stochastic, and/or chaotic environmental forcing. Using numerical simulations, we find the number and sequence of species going extinct when the community is initially packed with a large number of species of random initial densities. Thereby, any species with a density below a given threshold is regarded to be extinct.

(Environmental investigation of ground water contamination at Wright- Patterson Air Force Base, Ohio)

Energy Technology Data Exchange (ETDEWEB)

1991-10-01

This Health and Safety Plan (HSP) was developed for the Environmental Investigation of Ground-water Contamination Investigation at Wright-Patterson Air Force Base near Dayton, Ohio, based on the projected scope of work for the Phase 1, Task 4 Field Investigation. The HSP describes hazards that may be encountered during the investigation, assesses the hazards, and indicates what type of personal protective equipment is to be used for each task performed. The HSP also addresses the medical monitoring program, decontamination procedures, air monitoring, training, site control, accident prevention, and emergency response.

Diffusion of Brownian particles in a tilted periodic potential under the influence of an external Ornstein-Uhlenbeck noise

Science.gov (United States)

Bai, Zhan-Wu; Zhang, Wei

2018-01-01

The diffusion behaviors of Brownian particles in a tilted periodic potential under the influence of an internal white noise and an external Ornstein-Uhlenbeck noise are investigated through numerical simulation. In contrast to the case when the bias force is smaller or absent, the diffusion coefficient exhibits a nonmonotonic dependence on the correlation time of the external noise when bias force is large. A mechanism different from locked-to-running transition theory is presented for the diffusion enhancement by a bias force in intermediate to large damping. In the underdamped regime and the presence of external noise, the diffusion coefficient is a monotonically decreasing function of low temperature rather than a nonmonotonic function when external noise is absent. The diffusive process undergoes four regimes when bias force approaches but is less than its critical value and noises intensities are small. These behaviors can be attributed to the locked-to-running transition of particles.

Results of application of external fixation with different types of fixators

Directory of Open Access Journals (Sweden)

Grubor Predrag

2012-01-01

Full Text Available Introduction. Extra-focal or external fixation is the method of fracture fixation through the healthy part of the bone using pins or wires. Objective. The aim was to determine which external splints (Ortofix, Mitković, Charnley and Ilizarov had the best biomechanical properties in primary stabilization of spiral, transverse and commutative bone fractures. Methods. To determine the investigation methodology of biomechanical characteristics of the external fixator we used mathematical and computer simulator (software, juvidur physical model and clinical examination. Results. Values of advancing fragments in millimetres obtained by the study of mathematical and computer simulator (software: Charnley - 0.080 mm, Mitković M 20 - 0.785 mm, Ilizarov - 2.245 mm and Ortofix - 1.400 mm. In testing the juvidur model the following values were obtained: the external fixator Mitković M20 - 1.380 mm, Ortofix - 1.470 mm, Ilizarov - 2.410 mm, and Charnley - 2.510 mm. Clinical research of biomechanical characteristics of the effect of vertical force yielded the following results: Mitković M20 - 0.89 mm, Ortofix - 0.14 mm, Charnley - 0.80 mm and Ilizarov - 1.23 mm. Conclusion. When determining the total number of the stability test splints under the effect of vertical force (compression and force effect in antero-posterior, later-lateral plane of cross, spiral and comminuted long bone fractures, the best unified biomechanical stability was shown by the following external fixators: firstly, Mitković M20 (0.93mm, secondly, Charnley fixator (1.14 mm, thirdly, Ortofix (1.22 mm, and fourthly, Ilizarov (1.60 mm.

Self-consistent treatment of electrostatics in molecular DNA braiding through external forces.

Science.gov (United States)

Lee, Dominic J

2014-06-01

In this paper we consider a physical system in which two DNA molecules braid about each other. The distance between the two molecular ends, on either side of the braid, is held at a distance much larger than supercoiling radius of the braid. The system is subjected to an external pulling force, and a moment that induces the braiding. In a model, developed for understanding such a system, we assume that each molecule can be divided into a braided and unbraided section. We also suppose that the DNA is nicked so that there is no constraint of the individual linking numbers of the molecules. Included in the model are steric and electrostatic interactions, thermal fluctuations of the braided and unbraided sections of the molecule, as well as the constraint on the braid linking (catenation) number. We compare two approximations used in estimating the free energy of the braided section. One is where the amplitude of undulations of one molecule with respect to the other is determined only by steric interactions. The other is a self-consistent determination of the mean-squared amplitude of these undulations. In this second approximation electrostatics should play an important role in determining this quantity, as suggested by physical arguments. We see that if the electrostatic interaction is sufficiently large there are indeed notable differences between the two approximations. We go on to test the self-consistent approximation-included in the full model-against experimental data for such a system, and we find good agreement. However, there seems to be a slight left-right-handed braid asymmetry in some of the experimental results. We discuss what might be the origin of this small asymmetry.

Identifying the driving forces of urban expansion and its environmental impact in Jakarta-Bandung mega urban region

Science.gov (United States)

Pravitasari, A. E.; Rustiadi, E.; Mulya, S. P.; Setiawan, Y.; Fuadina, L. N.; Murtadho, A.

2018-05-01

The socio-economic development in Jakarta-Bandung Mega Urban Region (JBMUR) caused the increasing of urban expansion and led to a variety of environmental damage such as uncontrolled land use conversion and raising anthropogenic disaster. The objectives of this study are: (1) to identify the driving forces of urban expansion that occurs on JBMUR and (2) to analyze the environmental quality decline on JBMUR by producing time series spatial distribution map and spatial autocorrelation of floods and landslide as the proxy of anthropogenic disaster. The driving forces of urban expansion in this study were identified by employing Geographically Weighted Regression (GWR) model using 6 (six) independent variables, namely: population density, percentage of agricultural land, distance to the center of capital city/municipality, percentage of household who works in agricultural sector, distance to the provincial road, and distance to the local road. The GWR results showed that local demographic, social and economic factors including distance to the road spatially affect urban expansion in JBMUR. The time series spatial distribution map of floods and landslide event showed the spatial cluster of anthropogenic disaster in some areas. Through Local Moran Index, we found that environmental damage in one location has a significant impact on the condition of its surrounding area.

Force-Induced Unravelling of DNA Origami.

Science.gov (United States)

Engel, Megan C; Smith, David M; Jobst, Markus A; Sajfutdinow, Martin; Liedl, Tim; Romano, Flavio; Rovigatti, Lorenzo; Louis, Ard A; Doye, Jonathan P K

2018-05-31

The mechanical properties of DNA nanostructures are of widespread interest as applications that exploit their stability under constant or intermittent external forces become increasingly common. We explore the force response of DNA origami in comprehensive detail by combining AFM single molecule force spectroscopy experiments with simulations using oxDNA, a coarse-grained model of DNA at the nucleotide level, to study the unravelling of an iconic origami system: the Rothemund tile. We contrast the force-induced melting of the tile with simulations of an origami 10-helix bundle. Finally, we simulate a recently-proposed origami biosensor, whose function takes advantage of origami behaviour under tension. We observe characteristic stick-slip unfolding dynamics in our force-extension curves for both the Rothemund tile and the helix bundle and reasonable agreement with experimentally observed rupture forces for these systems. Our results highlight the effect of design on force response: we observe regular, modular unfolding for the Rothemund tile that contrasts with strain-softening of the 10-helix bundle which leads to catastropic failure under monotonically increasing force. Further, unravelling occurs straightforwardly from the scaffold ends inwards for the Rothemund tile, while the helix bundle unfolds more nonlinearly. The detailed visualization of the yielding events provided by simulation allows preferred pathways through the complex unfolding free-energy landscape to be mapped, as a key factor in determining relative barrier heights is the extensional release per base pair broken. We shed light on two important questions: how stable DNA nanostructures are under external forces; and what design principles can be applied to enhance stability.

Hydropower externalities: A meta-analysis

International Nuclear Information System (INIS)

Mattmann, Matteo; Logar, Ivana; Brouwer, Roy

2016-01-01

This paper presents a meta-analysis of existing research related to the economic valuation of the external effects of hydropower. A database consisting of 81 observations derived from 29 studies valuing the non-market impacts of hydropower electricity generation is constructed with the main aim to quantify and explain the economic values for positive and negative hydropower externalities. Different meta-regression model specifications are used to test the robustness of significant determinants of non-market values, including different types of hydropower impacts. The explanatory and predictive power of the estimated models is relatively high. Whilst controlling for sample and study characteristics, we find significant evidence for public aversion towards deteriorations of landscape, vegetation and wildlife caused by hydropower projects. There is however only weak evidence of willingness to pay for mitigating these effects. The main positive externality of hydropower generation, the avoidance of greenhouse gas emission, positively influences welfare estimates when combined with the share of hydropower in national energy production. Sensitivity to scope is detected, but not linked to specific externalities or non-market valuation methods. - Highlights: • A global meta-analysis of valuation studies of hydropower externalities is presented. • Positive and negative externalities are distinguished. • Welfare losses due to environmental deteriorations outweigh gains of GHG reductions. • There is only weak evidence of public WTP for mitigating negative externalities. • The non-market values of hydropower externalities are sensitive to scope.

Externalizing problems in childhood and adolescence predict subsequent educational achievement but for different genetic and environmental reasons.

Science.gov (United States)

Lewis, Gary J; Asbury, Kathryn; Plomin, Robert

2017-03-01

Childhood behavior problems predict subsequent educational achievement; however, little research has examined the etiology of these links using a longitudinal twin design. Moreover, it is unknown whether genetic and environmental innovations provide incremental prediction for educational achievement from childhood to adolescence. We examined genetic and environmental influences on parental ratings of behavior problems across childhood (age 4) and adolescence (ages 12 and 16) as predictors of educational achievement at age 16 using a longitudinal classical twin design. Shared-environmental influences on anxiety, conduct problems, and peer problems at age 4 predicted educational achievement at age 16. Genetic influences on the externalizing behaviors of conduct problems and hyperactivity at age 4 predicted educational achievement at age 16. Moreover, novel genetic and (to a lesser extent) nonshared-environmental influences acting on conduct problems and hyperactivity emerged at ages 12 and 16, adding to the genetic prediction from age 4. These findings demonstrate that genetic and shared-environmental factors underpinning behavior problems in early childhood predict educational achievement in midadolescence. These findings are consistent with the notion that early-childhood behavior problems reflect the initiation of a life-course persistent trajectory with concomitant implications for social attainment. However, we also find evidence that genetic and nonshared-environment innovations acting on behavior problems have implications for subsequent educational achievement, consistent with recent work arguing that adolescence represents a sensitive period for socioaffective development. © 2016 The Authors. Journal of Child Psychology and Psychiatry published by John Wiley & Sons Ltd on behalf of Association for Child and Adolescent Mental Health.

External costs of electricity production: case study Croatia

International Nuclear Information System (INIS)

Bozicevic Vrhovcak, Maja; Tomsic, Zeljko; Debrecin, Nenad

2005-01-01

Because electricity production is one of the major sources of pollution, and at the same time is the most centralised one, environmental issues in power system operation and planning are gaining ever-increasing attention. It is very difficult to compare environmental impacts of various electricity generation technologies and fuel types because they are extremely divergent. The most widely accepted common denominator today is the so-called external cost by which a monetary value is associated with environmental damage. In this paper, damages to human health resulting from Croatian thermal power plants annual operation are presented. Stack emissions have been translated into ambient concentrations by atmospheric dispersion modelling. Existing data on relations between human health degradation and ground concentrations of the analysed pollutants have been used. Geographic information software has been used in order to account for spatially dependent data. Monetary values have been assigned to the estimated human health damage. External costs resulting from impact of Croatian thermal power plants airborne emissions on human health have been calculated. The total Croatian thermal power system external costs, resulting from impacts on human health, are presented and discussed

Corporate environmental strategy and responsiveness to external stakeholders

NARCIS (Netherlands)

Schrama, Geerten

1997-01-01

Paper to be presented at the 13th EGOS Colloquium "Organisational Responses to Radical Environmental Changes", Budapest University of Economic Sciences, Budapest, July 3-5, 1997. Sub-theme 6: Responses to the Environmental Challenge in Organisation Studies.

Hydropower - internalized costs and externalized benefits

International Nuclear Information System (INIS)

Koch, F.H.

2002-01-01

The benefits of hydropower consist of the minimal level of noxious and greenhouse gas emissions, it's energy security from political instability, and its renewable, non-depletable nature. The costs of hydropower consist of negative effects on the river ecosystem and of social changes in communities in the vicinity of large projects. Public awareness of these costs has increased dramatically during the past two decades, and new hydro projects will not get approval unless adequate mitigation measures are taken to avoid, offset, or compensate for adverse environmental and social effects. To a very large extent, the hydropower industry has internalized what were previously social and environmental externalities. However, hydropower operators do not receive any compensation for the benefits, and to date their competitors (coal, natural gas, oil) have not been required to internalize their adverse environmental externalities. (emissions, depletion of supplies, and sometimes dependence on imported primary energy sources). This creates an uneven playing field, and the hydropower industry enthusiastically welcomes a discussion of this issue, and eventually measures to rectify the situation. The IEA Hydropower Agreement has completed a major international study on the environmental and social impacts of hydropower, and one major component of this study was a Life Cycle Assessment and comparison of all the most important electricity generation technologies. (author)

Investigating genetic and environmental contributions to adolescent externalizing behavior in a collectivistic culture: a multi-informant twin study.

Science.gov (United States)

Chen, J; Yu, J; Zhang, J; Li, X; McGue, M

2015-07-01

Little is known about the etiology of adolescents' externalizing behavior (Ext) in collectivistic cultures. We aimed to fill this gap by investigating the genetic and environmental influences on Ext in Chinese adolescents. The etiological heterogeneity of aggression (AGG) and rule breaking (RB) was also examined. The study sample included 908 pairs of same-sex twins aged from 10 to 18 years (mean = 13.53 years, s.d. = 2.26). Adolescents' Ext were assessed with the Achenbach System of Empirically Based Assessment including Child Behavior Checklist, Teacher Report Form, and Youth Self-Report. Univariate genetic analyses showed that genetic influences on all measures were moderate ranging from 34% to 50%, non-shared environmental effects ranged from 23% to 52%, and shared environmental effects were significant in parent- and teacher-reported measures ranging from 29% to 43%. Bivariate genetic analyses indicated that AGG and RB shared large genetic influences (r g = 0.64-0.79) but moderate non-shared environmental factors (r e = 0.34-0.52). Chinese adolescents' Ext was moderately influenced by genetic factors. AGG and RB had moderate independent genetic and non-shared environmental influences, and thus constitute etiologically distinct dimensions within Ext in Chinese adolescents. The heritability of AGG, in particular, was smaller in Chinese adolescents than suggested by previous data obtained on Western peers. This study suggests that the collectivistic cultural values and Confucianism philosophy may attenuate genetic potential in Ext, especially AGG.

Bolt Shear Force Sensor

Science.gov (United States)

2015-03-12

0030] FIG. 7 is an isometric view of a deformable ring of the bolt shear force sensor of the present invention with an optical Attorney Docket No...102587 9 of 19 fiber having Bragg gratings wound around the ring; [0031] FIG. 8 is an isometric view of the deformable ring with wire strain... strength . [0047] Once the joint is subjected to an external load (see force arrows “F” and “F/2”); any frictional resistance to slip is overcome and

Externalizing problems, attention regulation, and household chaos: a longitudinal behavioral genetic study.

Science.gov (United States)

Wang, Zhe; Deater-Deckard, Kirby; Petrill, Stephen A; Thompson, Lee A

2012-08-01

Previous research documented a robust link between difficulties in self-regulation and development of externalizing problems (i.e., aggression and delinquency). In this study, we examined the longitudinal additive and interactive genetic and environmental covariation underlying this well-established link using a twin design. The sample included 131 pairs of monozygotic twins and 173 pairs of same-sex dizygotic twins who participated in three waves of annual assessment. Mothers and fathers provided reports of externalizing problems. Teacher report and observer rating were used to assess twin's attention regulation. The etiology underlying the link between externalizing problems and attention regulation shifted from a common genetic mechanism to a common environmental mechanism in the transition across middle childhood. Household chaos moderated the genetic variance of and covariance between externalizing problems and attention regulation. The genetic influence on individual differences in both externalizing problems and attention regulation was stronger in more chaotic households. However, higher levels of household chaos attenuated the genetic link between externalizing problems and attention regulation.

Effect of the External Lubrication Method for a Rotary Tablet Press on the Adhesion of the Film Coating Layer.

Science.gov (United States)

Kondo, Hisami; Toyota, Hiroyasu; Kamiya, Takayuki; Yamashita, Kazunari; Hakomori, Tadashi; Imoto, Junko; Kimura, Shin-Ichiro; Iwao, Yasunori; Itai, Shigeru

2017-01-01

External lubrication is a useful method which reduces the adhesion of powder to punches and dies by spraying lubricants during the tableting process. However, no information is available on whether the tablets prepared using an external lubrication system can be applicable for a film coating process. In this study, we evaluated the adhesion force of the film coating layer to the surface of tablets prepared using an external lubrication method, compared with those prepared using internal lubrication method. We also evaluated wettability, roughness and lubricant distribution state on the tablet surface before film coating, and investigated the relationship between peeling of the film coating layer and these tablet surface properties. Increasing lubrication through the external lubrication method decreased wettability of the tablet surface. However, no change was observed in the adhesion force of the film coating layer. On the other hand, increasing lubrication through the internal lubrication method, decreased both wettability of the tablet surface and the adhesion force of the film coating layer. The magnesium stearate distribution state on the tablet surface was assessed using an X-ray fluorescent analyzer and lubricant agglomerates were observed in the case of the internal lubrication method. However, the lubricant was uniformly dispersed in the external lubrication samples. These results indicate that the distribution state of the lubricant affects the adhesion force of the film coating layer, and external lubrication maintained sufficient lubricity and adhesion force of the film coating layer with a small amount of lubricant.

The force applied to successfully turn a foetus during reattempts of external cephalic version is substantially reduced when performed under spinal analgesia.

Science.gov (United States)

Suen, Stephen Sik Hung; Khaw, Kim S; Law, Lai Wa; Sahota, Daljit Singh; Lee, Shara Wee Yee; Lau, Tze Kin; Leung, Tak Yeung

2012-06-01

To compare the forces exerted during external cephalic version (ECV) on the maternal abdomen between ( 1 ) the primary attempts performed without spinal analgesia (SA), which failed and ( 2 ) the subsequent reattempts performed under SA. Patients with an uncomplicated singleton breech-presenting pregnancy suitable for ECV were recruited. During ECV, the operator wore a pair of gloves, which had thin piezo-resistive pressure sensors measuring the contact pressure between the operator's hands and maternal abdomen. For patients who had failed ECV, reattempts by the same operator was made with patients under SA, and the applied force was measured in the same manner. The profile of the exerted forces over time during each attempt was analyzed and denoted by pressure-time integral (PTI: mmHg sec). Pain score was also graded by patients using visual analogue scale. Both PTI and pain score before and after the use of SA were then compared. Overall, eight patients who had a failed ECV without SA underwent a reattempt with SA. All of them had successful version and the median PTI of the successful attempts under SA were lower than that of the previous failed attempts performed without SA (127 386 mmHg sec vs. 298,424 mmHg sec; p = 0.017). All of them also reported a 0 pain score, which was significantly lower than that of before (median 7.5; p = 0.016). SA improves the success rate of ECV as well as reduces the force required for successful version.

EXTERNAL BUSINESS ENVIRONEMENT PROBLEMS AND OPPORTUNITIES IN REZEKNE CITY

OpenAIRE

Litavniece, Lienīe; Znotiņa, Daina

2015-01-01

Entrepreneurship is an essential driving force for the social and economic development of any city. Well-arranged external environment is a fundamental prerequisite in order to motivate local entrepreneurs and to attract investors for establishing new businesses and development of the existing ones. An important role in the development of the external business environment is played by the political position of the local government and the process regulations at the city. The paper aims to car...

ANALYSIS OF THE PROCESSES IN AN INDUCTOR SYSTEM WITH AN ATTRACTING SCREEN EXCITED BY THE EXTERNAL CIRCULAR SOLENOID

Directory of Open Access Journals (Sweden)

E.A. Chaplygin

2015-12-01

Full Text Available Introduction. Developments in the field of magnetic-pulse treatment of metals (MPTM are increasingly used in the modern technologies of production and repair of the aviation, automotive and other machinery, as they are environmentally friendly and energy-efficient in comparison with classical approaches. One of the main components of the device MPTM is a tool – inductor or the inductor system with an attractive screen (ISAS. The calculated dependences to calculate the inductor system with an attractive screen were taken from previous works. The ratios were obtained for the low-frequency mode of the excited fields, when is place their significant penetration through a thin-walled metal screen and a deformed workpiece. As it was shown earlier this mode is the most efficient from point of view of a force action on the object of a processing. Purpose. The theoretical analysis of the spatial-temporal distributions of the induced currents and forces of an attraction in the inductor system with an attractive screen excited by a flat circular solenoid located on the outside of the auxiliary screen. Methodology. The calculations are shown that the induced currents both in the screen and the workpiece are unidirectional and their interaction, in accordance with the law of Ampere determines the amplitudes of excited forces of attraction. Let’s note the effective validity of the considered inductor system excited by an external circular solenoid. With sufficient simplicity of the design take place rather high values of the developed forces of attraction and their averages. Results. Physically, a higher power efficiency of the system with an «external» coil in comparison with a system where coil is located in the internal cavity, can be accounted for lade of «failure» in the radial distribution of the excited forces. This «failure» in the design with a coil between the sheet metal is caused by its screening action against the forces of attraction

Environmental external gamma radiation isodose map of Kinta and Batang Padang Districts, Perak

International Nuclear Information System (INIS)

Ismail, B.; Monawarah, N.M.Y.; Hng, P.W.; Sharifah Mastura, S.A

2005-01-01

The background radiation levels of any area, including those related to having deposit of NORM is important to be mapped out before being developed in order to assess their for potential radiological risk. A study was carried out map the environmental external gammas radiation dose rates in Kinta and Batang Padang Districts, Perak. The interpolation method in GIS was used to produce an isodose map based on prediction made from 13 different geological structure soil type combinations. Actual field measurements were carried using Sodium Iodine detectors. A predicted isodose map was plotted based on 5 dose rate classes, ranging from 0.16-0.57 Sv hr -1 . The area dose rates was increased to 5.00 Sv hr -1 once the dose rates contributed artificially by among plants to the study area was considered. Results also showed that the geosoil combination of steep land and acid intrusive rock areas radiates the highest dose rate levels (90.31 %) and most of these areas are in areas covered by hilly mountain. (Author)

Femoral Component External Rotation Affects Knee Biomechanics: A Computational Model of Posterior-stabilized TKA.

Science.gov (United States)

Kia, Mohammad; Wright, Timothy M; Cross, Michael B; Mayman, David J; Pearle, Andrew D; Sculco, Peter K; Westrich, Geoffrey H; Imhauser, Carl W

2018-01-01

The correct amount of external rotation of the femoral component during TKA is controversial because the resulting changes in biomechanical knee function associated with varying degrees of femoral component rotation are not well understood. We addressed this question using a computational model, which allowed us to isolate the biomechanical impact of geometric factors including bony shapes, location of ligament insertions, and implant size across three different knees after posterior-stabilized (PS) TKA. Using a computational model of the tibiofemoral joint, we asked: (1) Does external rotation unload the medial collateral ligament (MCL) and what is the effect on lateral collateral ligament tension? (2) How does external rotation alter tibiofemoral contact loads and kinematics? (3) Does 3° external rotation relative to the posterior condylar axis align the component to the surgical transepicondylar axis (sTEA) and what anatomic factors of the femoral condyle explain variations in maximum MCL tension among knees? We incorporated a PS TKA into a previously developed computational knee model applied to three neutrally aligned, nonarthritic, male cadaveric knees. The computational knee model was previously shown to corroborate coupled motions and ligament loading patterns of the native knee through a range of flexion. Implant geometries were virtually installed using hip-to-ankle CT scans through measured resection and anterior referencing surgical techniques. Collateral ligament properties were standardized across each knee model by defining stiffness and slack lengths based on the healthy population. The femoral component was externally rotated from 0° to 9° relative to the posterior condylar axis in 3° increments. At each increment, the knee was flexed under 500 N compression from 0° to 90° simulating an intraoperative examination. The computational model predicted collateral ligament forces, compartmental contact forces, and tibiofemoral internal/external and

External Environment and Upper Echelons Theory

DEFF Research Database (Denmark)

Escribá-Esteve, Alejandro; Nielsen, Sabina; Yamak, Sibel

This work reviews empirical research on TMTs with a specific emphasis on the role of the external environment. We extend the existing research on upper echelons theory, which has largely focused on the team and firm level of analyses of top management teams (TMT). Considering institutional...... and industrial organization theories, we elaborate a cross-level conceptual model outlining the direct, mediating and moderating effects of the external environment on TMTs and their impact. Our review distinguishes between industry and institutional level of analyses and three types of environmental...

DNA under Force: Mechanics, Electrostatics, and Hydration

Directory of Open Access Journals (Sweden)

Jingqiang Li

2015-02-01

Full Text Available Quantifying the basic intra- and inter-molecular forces of DNA has helped us to better understand and further predict the behavior of DNA. Single molecule technique elucidates the mechanics of DNA under applied external forces, sometimes under extreme forces. On the other hand, ensemble studies of DNA molecular force allow us to extend our understanding of DNA molecules under other forces such as electrostatic and hydration forces. Using a variety of techniques, we can have a comprehensive understanding of DNA molecular forces, which is crucial in unraveling the complex DNA functions in living cells as well as in designing a system that utilizes the unique properties of DNA in nanotechnology.

New force replica exchange method and protein folding pathways probed by force-clamp technique.

Science.gov (United States)

Kouza, Maksim; Hu, Chin-Kun; Li, Mai Suan

2008-01-28

We have developed a new extended replica exchange method to study thermodynamics of a system in the presence of external force. Our idea is based on the exchange between different force replicas to accelerate the equilibrium process. This new approach was applied to obtain the force-temperature phase diagram and other thermodynamical quantities of the three-domain ubiquitin. Using the C(alpha)-Go model and the Langevin dynamics, we have shown that the refolding pathways of single ubiquitin depend on which terminus is fixed. If the N end is fixed then the folding pathways are different compared to the case when both termini are free, but fixing the C terminal does not change them. Surprisingly, we have found that the anchoring terminal does not affect the pathways of individual secondary structures of three-domain ubiquitin, indicating the important role of the multidomain construction. Therefore, force-clamp experiments, in which one end of a protein is kept fixed, can probe the refolding pathways of a single free-end ubiquitin if one uses either the polyubiquitin or a single domain with the C terminus anchored. However, it is shown that anchoring one end does not affect refolding pathways of the titin domain I27, and the force-clamp spectroscopy is always capable to predict folding sequencing of this protein. We have obtained the reasonable estimate for unfolding barrier of ubiquitin, using the microscopic theory for the dependence of unfolding time on the external force. The linkage between residue Lys48 and the C terminal of ubiquitin is found to have the dramatic effect on the location of the transition state along the end-to-end distance reaction coordinate, but the multidomain construction leaves the transition state almost unchanged. We have found that the maximum force in the force-extension profile from constant velocity force pulling simulations depends on temperature nonlinearly. However, for some narrow temperature interval this dependence becomes

External technology sourcing : The effect of uncertainty on governance mode choice

NARCIS (Netherlands)

van de Vrande, V.; Vanhaverbeke, W.P.M.; Duijsters, G.M.

2009-01-01

External knowledge sourcing is increasingly important for corporate entrepreneurship. In this study, we examine the effect of external and relational uncertainty on the governance choice for inter-organizational technology sourcing. We develop a number of hypotheses about the impact of environmental

Annular Internal-External-Expansion Rocket Nozzles for Large Booster Applications

Science.gov (United States)

Connors, James F.; Cubbison, Robert W.; Mitchell, Glenn A.

1961-01-01

For large-thrust booster applications, annular rocket nozzles employing both internal and external expansion are investigated. In these nozzles, free-stream air flows through the center as well as around the outside of the exiting jet. Flaps for deflecting the rocket exhaust are incorporated on the external-expansion surface for thrust-vector control. In order to define nozzle off-design performance, thrust vectoring effectiveness, and external stream effects, an experimental investigation was conducted on two annular nozzles with area ratios of 15 and 25 at Mach 0, 2, and 3 in the Lewis 10- by 10-foot wind tunnel. Air, pressurized to 600 pounds per square inch absolute, was used to simulate the exhaust flow. For a nozzle-pressure-ratio range of 40 to 1000, the ratio of actual to ideal thrust was essentially constant at 0.98 for both nozzles. Compared with conventional convergent-divergent configurations on hypothetical boost missions, the performance gains of the annular nozzle could yield significant orbital payload increases (possibly 8 to 17 percent). A single flap on the external-expansion surface of the area-ratio-25 annular nozzle produced a side force equal to 4 percent of the axial force with no measurable loss in axial thrust.

Biomechanical Comparison of External Fixation and Compression Screws for Transverse Tarsal Joint Arthrodesis.

Science.gov (United States)

Latt, L Daniel; Glisson, Richard R; Adams, Samuel B; Schuh, Reinhard; Narron, John A; Easley, Mark E

2015-10-01

Transverse tarsal joint arthrodesis is commonly performed in the operative treatment of hindfoot arthritis and acquired flatfoot deformity. While fixation is typically achieved using screws, failure to obtain and maintain joint compression sometimes occurs, potentially leading to nonunion. External fixation is an alternate method of achieving arthrodesis site compression and has the advantage of allowing postoperative compression adjustment when necessary. However, its performance relative to standard screw fixation has not been quantified in this application. We hypothesized that external fixation could provide transverse tarsal joint compression exceeding that possible with screw fixation. Transverse tarsal joint fixation was performed sequentially, first with a circular external fixator and then with compression screws, on 9 fresh-frozen cadaveric legs. The external fixator was attached in abutting rings fixed to the tibia and the hindfoot and a third anterior ring parallel to the hindfoot ring using transverse wires and half-pins in the tibial diaphysis, calcaneus, and metatarsals. Screw fixation comprised two 4.3 mm headless compression screws traversing the talonavicular joint and 1 across the calcaneocuboid joint. Compressive forces generated during incremental fixator foot ring displacement to 20 mm and incremental screw tightening were measured using a custom-fabricated instrumented miniature external fixator spanning the transverse tarsal joint. The maximum compressive force generated by the external fixator averaged 186% of that produced by the screws (range, 104%-391%). Fixator compression surpassed that obtainable with screws at 12 mm of ring displacement and decreased when the tibial ring was detached. No correlation was found between bone density and the compressive force achievable by either fusion method. The compression across the transverse tarsal joint that can be obtained with a circular external fixator including a tibial ring exceeds that

Analyzing the Long Term Cohesive Effect of Sector Specific Driving Forces.

Directory of Open Access Journals (Sweden)

Yonatan Berman

Full Text Available Financial markets are partially composed of sectors dominated by external driving forces, such as commodity prices, infrastructure and other indices. We characterize the statistical properties of such sectors and present a novel model for the coupling of the stock prices and their dominating driving forces, inspired by mean reverting stochastic processes. Using the model we were able to explain the market sectors' long term behavior and estimate the coupling strength between stocks in financial markets and the sector specific driving forces. Notably, the analysis was successfully applied to the shipping market, in which the Baltic dry index (BDI, an assessment of the price of transporting the major raw materials by sea, influences the shipping financial market. We also present the analysis of other sectors-the gold mining market and the food production market, for which the model was also successfully applied. The model can serve as a general tool for characterizing the coupling between external forces and affected financial variables and therefore for estimating the risk in sectors and their vulnerability to external stress.

The constrained control of force and position in multi-joint movements.

Science.gov (United States)

van Ingen Schenau, G J; Boots, P J; de Groot, G; Snackers, R J; van Woensel, W W

1992-01-01

In many arm or leg movements the hand or foot has to exert an external force on the environment. Based on an inverse dynamical analysis of cycling, it is shown that the distribution of net moments in the joints needed to control the direction of the external force is often opposite to the direction of joint displacements associated with this task. Kinetic and kinematic data were obtained from five experienced cyclists during ergometer cycling by means of film analysis and pedal force measurement. An inverse dynamic analysis, based on a linked segments model, yielded net joint moments, joint powers and muscle shortening velocities of eight leg muscles. Activation patterns of the muscles were obtained by means of surface electromyography. The results show that the transfer of rotations in hip, knee and ankle joints into the translation of the pedal is constrained by conflicting requirements. This occurs between the joint moments necessary to contribute to joint power and the moments necessary to establish a direction of the force on the pedal which allows this force to do work on the pedal. Co-activation of mono-articular agonists and their bi-articular antagonists appear to provide a unique solution for these conflicting requirements: bi-articular muscles appear to be able to control the desired direction of the external force on the pedal by adjusting the relative distribution of net moments over the joints while mono-articular muscles appear to be primarily activated when they are in the position to shorten and thus to contribute to positive work. Examples are given to illustrate the universal nature of this constrained control of force (external) and position (joint). Based on this study and published data it is suggested that different processes may underlie the organization of the control of mono- and bi-articular muscles.

Force adaptation transfers to untrained workspace regions in children: evidence for developing inverse dynamic motor models.

Science.gov (United States)

Jansen-Osmann, Petra; Richter, Stefanie; Konczak, Jürgen; Kalveram, Karl-Theodor

2002-03-01

When humans perform goal-directed arm movements under the influence of an external damping force, they learn to adapt to these external dynamics. After removal of the external force field, they reveal kinematic aftereffects that are indicative of a neural controller that still compensates the no longer existing force. Such behavior suggests that the adult human nervous system uses a neural representation of inverse arm dynamics to control upper-extremity motion. Central to the notion of an inverse dynamic model (IDM) is that learning generalizes. Consequently, aftereffects should be observable even in untrained workspace regions. Adults have shown such behavior, but the ontogenetic development of this process remains unclear. This study examines the adaptive behavior of children and investigates whether learning a force field in one hemifield of the right arm workspace has an effect on force adaptation in the other hemifield. Thirty children (aged 6-10 years) and ten adults performed 30 degrees elbow flexion movements under two conditions of external damping (negative and null). We found that learning to compensate an external damping force transferred to the opposite hemifield, which indicates that a model of the limb dynamics rather than an association of visited space and experienced force was acquired. Aftereffects were more pronounced in the younger children and readaptation to a null-force condition was prolonged. This finding is consistent with the view that IDMs in children are imprecise neural representations of the actual arm dynamics. It indicates that the acquisition of IDMs is a developmental achievement and that the human motor system is inherently flexible enough to adapt to any novel force within the limits of the organism's biomechanics.

Externalizing problems, attention regulation, and household chaos: A longitudinal behavioral genetic study

Science.gov (United States)

Wang, Zhe; Deater-Deckard, Kirby; Petrill, Stephen A.; Thompson, Lee A.

2015-01-01

Previous research has documented a robust link between difficulties in self-regulation and development of externalizing problems (i.e., aggression and delinquency). In the current study, we examined the longitudinal additive and interactive genetic and environmental covariation underlying this well-established link using a twin design. The sample included 131 pairs of monozygotic twins and 173 pairs of same-sex dizygotic twins who participated in three waves of annual assessment. Mothers and fathers provided reports of externalizing problems. Teacher report and observer rating were used to assess twin’s attention regulation. The etiology underlying the link between externalizing problems and attention regulation shifted from a common genetic mechanism to a common environmental mechanism in the transition across middle childhood. Household chaos moderated the genetic variance of and covariance between externalizing problems and attention regulation. The genetic influence on individual differences in both externalizing problems and attention regulation was stronger in more chaotic household. However, higher levels of household chaos attenuated the genetic link between externalizing problems and attention regulation. PMID:22781853

Effect of external energy on atomic, crystalline and powder ...

Indian Academy of Sciences (India)

Administrator

rated by low-angle boundaries, leading to a decrease of atomic level strain ..... Fracture can only occur at defects or due to work ... slip planes and intersecting slip planes built in stress .... to an external compressive force the rather flexible elec-.

EVALUATION OF WASTE PACKAGE EXTERNAL ENVIRONMENTAL CONDITION STUDY

International Nuclear Information System (INIS)

E. N. Lindner and E. F. Dembowski

1998-01-01

The U. S. Department of Energy (DOE) is studying Yucca Mountain as the possible site for a permanent underground repository for disposal of spent nuclear fuel (SNF) and other high-level waste (HLW). The emplacement of high-level radioactive waste in Yucca Mountain will release a large amount of heat into the rock above and below the repository. Due to this heat, the rock temperature will rise, and then decrease when the production of decay heat falls below the rate at which heat escapes from the hot zone. In addition to raising the rock temperature, the heat will vaporize water, which will condense in cooler regions. The condensate water may drain back toward the emplacement drifts or it may ''shed'' through the pillars between emplacement drifts. Other effects, such as coupled chemical and mechanical processes, may influence the movement of water above, within, and below the emplacement drifts. This study examined near field environmental parameters that could have an effect on the waste package, including temperature, humidity, seepage rate, pH of seepage, chemistry (dissolved salts/minerals) of seepage, composition of drift atmosphere, colloids, and biota. This report is a Type I analysis performed in support of the development of System Description Documents (SDDs). A Type I analysis is a quantitative or qualitative analysis that may fulfill any of a variety of purposes associated with the Monitored Geologic Repository (MGR), other than providing direct analytical support for design output documents. A Type I analysis may establish design input, as defined in the ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998). This study establishes a technical basis for emplacement drift (i.e. at the waste package surface) environment criteria to be considered in the development of the waste package design. The information will support development of several SDDs and resolve emplacement drift external environment questions in the criteria of those

Long-dated evaluation of the external costs of the nuclear

International Nuclear Information System (INIS)

Le Dars, A.; Schneider, T.

2002-09-01

Since the middle of the years 1990, the European Commission developed an ''ExternE'' methodology to propose an homogenous evaluation of the sanitary and environmental external costs of the various energy sectors in Europe. This document discusses the taking into account of the long-dated and analyzes the interests and the limits of the monetary evaluation, in terms of external costs, of the nuclear choice. It is organized in three chapters: 1. a presentation and a discussion on the various evaluation of the ''ExternE'' methodology; 2. a description of the available methods for the monetary evaluation of the long-dated impacts and more particularly the analysis of the monetary values actualization principle; 3. highlighted of the impacts for which the monetary evaluations exist. (A.L.B.)

Hybrid Force and Position Control Strategy of Robonaut Performing Object Transfer Task

Directory of Open Access Journals (Sweden)

Chen Gang

2018-01-01

Full Text Available This paper proposes a coordinated hybrid force/position control strategy of robonaut performing object transfer operation. Firstly, the constraint relationships between robonaut and object are presented. Base on them, the unified dynamic model of the robonaut and object is established to design the hybrid force/position control method. The movement, the internal force and the external constraint force of the object are considered as the control targets of the control system. Finally, a MATLAB simulation of the robonaut performing object transfer task verifies the correctness and effectiveness of the proposed method. The results show that all the targets can be control accurately by using the method proposed in this paper. The presented control method can control both internal and external forces while maintaining control accuracy, which is a common control strategy.

Environmentally damaging electricity trade

International Nuclear Information System (INIS)

Billette de Villemeur, Etienne; Pineau, Pierre-Olivier

2010-01-01

Electricity trade across regions is often considered welfare enhancing. We show in this paper that this should be reconsidered if environmental externalities are taken into account. We consider two cases where trade is beneficial, before accounting for environmental damages: first, when two regions with the same technology display some demand heterogeneity; second when one region endowed with hydropower arbitrages with its 'thermal' neighbor. Our results show that under reasonable demand and supply elasticities, trade comes with an additional environmental cost. This calls for integrating environmental externalities into market reforms when redesigning the electricity sector. Two North American applications illustrate our results: trade between Pennsylvania and New York, and trade between hydro-rich Quebec and New York.

Siting of a low-level radioactive waste management facility - environmental assessment experiences of the Canadian siting task force

International Nuclear Information System (INIS)

Gorber, D.M.; Story, V.A.

1995-01-01

After public opposition to the plans for a low-level radioactive waste facility at one of two candidate areas at Port Hope, Canada the Environmental Assessment process was postponed, and an independent Siting Process Task Force was set-up to assess the most suitable technologies for LLRW disposal, the areas with the best potential in the province to use these technologies, and the most promising approaches to site selection. The Task Force recommended a five-phased siting process known as the 'Co-operative Siting Process', which was based on the voluntary participation of local communities and a collaborative, joint-planning style of decision making. An independent Siting Task Force was to be established to ensure that the principles of the recommended process was upheld. This siting process is still underway, and problems and successes that have been encountered are summarized in this contribution

Picophytoplankton as Tracers of Environmental Forcing in a Tropical Monsoonal Bay.

Science.gov (United States)

Mitbavkar, Smita; Patil, Jagadish S; Rajaneesh, K M

2015-10-01

In order to better understand the picophytoplankton (PP) dynamics in tropical monsoon influenced coastal regions, samples were collected daily (June-September 2008: monsoon, December 2008: post-monsoon and April 2009: pre-monsoon) from a fixed station in Dona Paula Bay, India. Eight PP abundance peaks comprising Prochlorococcus-like cells, picoeukaryotes, and three groups of Synechococcus occurred. The chlorophyll biomass and PP abundance were negatively influenced by reduced solar radiation, salinity and water transparency due to precipitation and positively influenced by the stabilized waters during precipitation break/non-monsoon periods. Responses to environmental conditions differed with PP groups, wherein the presence of Synechococcus-PEI (phycoerythrin) throughout the year suggested its ability to tolerate salinity and temperature variations and low light conditions. Synechococcus-PEII appearance toward monsoon end and non-monsoon during high water transparency suggests its tidal advection from offshore waters. Dominance of Synechococcus-PC (phycocyanin) at intermediate salinities under low water transparency during MON and high salinities in PrM coinciding with high nitrate concentrations implies a greater influence of light quality or nutrients. Cyanobacteria and not picoeukaryotes were the dominant picophytoplankton in terms of numbers as well as biomass. This study suggests that PP could be used as tracers of environmental forcing driven by tides and freshwater influx and also highlights the importance of high-frequency samplings in dynamic coastal regions through which transient responses can be captured.

Measuring Air Force Contracting Customer Satisfaction

Science.gov (United States)

2015-12-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT MEASURING AIR FORCE CONTRACTING CUSTOMER SATISFACTION ...... satisfaction elements should be included in a standardized tool that measures the level of customer satisfaction for AF Contracting’s external and

Externalities in utility resource selection: A means to formally recognize the envionmental benefits of wind farms

International Nuclear Information System (INIS)

Birner, S.

1992-01-01

Wind can only make its full contribution to the minimization of the total cost of energy services if it is valued for all the costs that it avoids, including avoided environmental costs. Means of incorporating environmental costs, or externalities, into utility planning decisions are described. Externalities are defined as uncompensated costs or benefits of an action borne by a party other than the one causing the costs. A simple example of the use of externalities in utility resource selection is presented, comparing costs of a coal-fired power plant and a wind farm. Externalities of wind farms are analyzed and found to be very low. An examination of some aspects of legislation in the USA and Canada shows a trend for utility commissions and other regulatory bodies to determine that including externalitites lies within their mandate. By formally recognizing and accounting for the environmental benefits of wind farms, it is seen that externalities can have a significant effect on utility demand for wind energy. A review of USA state actions regarding externalities is appended. 10 refs

Spherical tokamak without external toroidal fields

International Nuclear Information System (INIS)

Kaw, P.K.; Avinash, K.; Srinivasan, R.

2001-01-01

A spherical tokamak design without external toroidal field coils is proposed. The tokamak is surrounded by a spheromak shell carrying requisite force free currents to produce the toroidal field in the core. Such equilibria are constructed and it is indicated that these equilibria are likely to have robust ideal and resistive stability. The advantage of this scheme in terms of a reduced ohmic dissipation is pointed out. (author)

Genetic and environmental influences on externalizing behavior and alcohol problems in adolescence: A female twin study

Science.gov (United States)

Knopik, Valerie S.; Heath, Andrew C.; Bucholz, Kathleen K.; Madden, Pamela A.F.; Waldron, Mary

2009-01-01

Genetic and environmental contributions to the observed correlations among DSM-IV ADHD problems [inattentive (INATT) and hyperactive/impulsive (HYP/IMP) behaviors], conduct problems (CDP) and alcohol problems (AlcProb) were examined by fitting multivariate structural equation models to data from the Missouri Adolescent Female Twin Study [N=2892 twins (831 monozygotic pairs, 615 dizygotic pairs)]. Based on results of preliminary regression models, we modified the structural model to jointly estimate (i) the regression of each phenotype on significant familial/prenatal predictors, and (ii) genetic and environmental contributions to the residual variance and covariance. Results suggested that (i) parental risk factors, such as parental alcohol dependence and regular smoking, increase risk for externalizing behavior; (ii) prenatal exposures predicted increased symptomatology for HYP/IMP (smoking during pregnancy), INATT and CDP (prenatal alcohol exposure); (iii) after adjusting for measured familial/prenatal risk factors, genetic influences were significant for HYP/IMP, INATT, and CDP; however, similar to earlier reports, genetic effects on alcohol dependence symptoms were negligible; and (iv) in adolescence, correlated liabilities for conduct and alcohol problems are found in environmental factors common to both phenotypes, while covariation among impulsivity, inattention, and conduct problems is primarily due to genetic influences common to these three behaviors. Thus, while a variety of adolescent problem behaviors are significantly correlated, the structure of that association may differ as a function of phenotype (e.g., comorbid HYP/IMP and CDP vs. comorbid CDP and AlcProb), a finding that could inform different approaches to treatment and prevention. PMID:19341765

The external respiration and gas exchange in space missions

Science.gov (United States)

Baranov, V. M.; Tikhonov, M. A.; Kotov, A. N.

Literature data and results of our own studies into an effect of micro- and macro-gravity on an external respiration function of man are presented. It is found that in cosmonauts following the 7-366 day space missions there is an enhanced tendency associated with an increased flight duration toward a decrease in the lung volume and breathing mechanics parameters: forced vital capacity of the lungs (FVC) by 5-25 percent, peak inspiratory and expiratory (air) flows (PIF, PEF) by 5-40 percent. A decrease in FVC appears to be explained by a new balance of elastic forces of the lungs, chest and abdomen occuring in microgravity as well as by an increased blood filling and pulmonary hydration. A decline of PIF and PEF is probalbly resulted from antigravitational deconditioning of the respiratory muscles with which a postflight decreased physical performance can in part be associated. The ventilation/perfusion ratios during orthostasis and +G Z and +G X accelerations are estimated. The biophysical nature of developing the absorption atelectases on a combined exposure to accelerations and 100% oxygen breathing is confirmed. A hypothesis that hypervolemia and pulmonary congestion can increase the tendency toward the development of atelectases in space in particular during pure oxygen breathing is suggested. Respiratory physiology problem area which is of interest for space medicine is defined. It is well known that due to present-day technologic progress and accomplishments in applied physiology including applied respiration physiology there currently exist sophisticated technical facilities in operation maintaining the life and professional working capacity of a man in various natural environments: on Earth, under water and in space. By the way, the biomedical involvement in developing and constructing such facilities has enabled an accumulation of a great body of information from experimental studies and full-scale trails to examine the effects of the changed environments

Effects of load on ground reaction force and lower limb kinematics during concentric squats.

Science.gov (United States)

Kellis, Eleftherios; Arambatzi, Fotini; Papadopoulos, Christos

2005-10-01

The purpose of this study was to examine the effects of external load on vertical ground reaction force, and linear and angular kinematics, during squats. Eight males aged 22.1 +/- 0.8 years performed maximal concentric squats using loads ranging from 7 to 70% of one-repetition maximum on a force plate while linear barbell velocity and the angular kinematics of the hip, knee and ankle were recorded. Maximum, average and angle-specific values were recorded. The ground reaction force ranged from 1.67 +/- 0.20 to 3.21 +/- 0.29 times body weight and increased significantly as external load increased (P squat exercises is not achieved at the same position of the lower body as external load is increased. In contrast, joint velocity coordination does not change as load is increased. The force-velocity relationship was linear and independent from the set of data used for its determination.

Low frequency temperature forcing of chemical oscillations.

Science.gov (United States)

Novak, Jan; Thompson, Barnaby W; Wilson, Mark C T; Taylor, Annette F; Britton, Melanie M

2011-07-14

The low frequency forcing of chemical oscillations by temperature is investigated experimentally in the Belousov-Zhabotinsky (BZ) reaction and in simulations of the Oregonator model with Arrhenius temperature dependence of the rate constants. Forcing with temperature leads to modulation of the chemical frequency. The number of response cycles per forcing cycle is given by the ratio of the natural frequency to the forcing frequency and phase locking is only observed in simulations when this ratio is a whole number and the forcing amplitude is small. The global temperature forcing of flow-distributed oscillations in a tubular reactor is also investigated and synchronisation is observed in the variation of band position with the external signal, reflecting the periodic modulation of chemical oscillations by temperature.

Exploring Environmental Disclosure in SelectedAustralian Multinationals under the GRI Guidelines

Directory of Open Access Journals (Sweden)

Omar Al Farooque

2014-09-01

Full Text Available This paper explores changes in environmental reporting among Australian MNEs between 2004 and 2007, using the GRI guidelines, and explains how GRI transformation (from G2 to G3 leads to changes in environmental disclosure aspects along with their association with company size, profitability, industry sector. Applying Wilcoxon matched pair signed ranked and Spearman rank correlation tests, twenty companies from the Australian SAM Sustainability Index (AuSSI are examined to identify the extent of changes on specific aspects of environmental disclosure. The findings of the paper document a significant increase in environmental reporting in Australian companies. In particular, reporting has increased for energy, emissions and environmental management followed by water, overall, materials, transport and product/services aspects. However, a shift in emphasis from compliance and biodiversity aspects associated with climate changes and resource preservation is also evident. Again, the majority of changes occurred in companies operating in environmentally sensitive industries with industry sector having significant relationship with a few environmental disclosure aspects, the study shows no significant effect of company size and profitability on different environmental disclosure aspects. These evidences indicate that external forces (such as, legislation, industry sensitiveness to environment, and stakeholder awareness and pressure rather than internal factors are more effective to influence and determine environmental disclosure in Australian companies.

Optical Forces Near Microfabricated Devices

Science.gov (United States)

2013-08-01

gravitational, buoyant, brownian , electrostatic and those forces that develop from the interaction 4 15 between an external electromagnetic field and a...average Brownian force can be shown to be ∼ 1× 10−4 pN. For this system the Reynolds number is ∼ 1 × 10−7. At a low Reynolds number, the inertia plays no...modulator or any movement of the beam or sample, it can be easily adapted for a variety of integrated, lab-on-a-chip applications. Finally, by tuning

Monetary valorization of the sanitary and environmental impacts of a nuclear accident: synthesis of ''ExternE'' studies, interests and limits of complementary developments

International Nuclear Information System (INIS)

Schieber, C.; Schneider, Th.

2002-09-01

This document constitutes a synthesis of the various available methods for the monetary evaluation of the nuclear accidents impacts in order to reveal the already evaluated impacts, those which need complementary developments and those for which the monetary approach currently seems to come up against limits. It is based primarily on the approach realized by the ''ExternE'' project of the European Commission, consisting in the evaluation of the external costs of the nuclear energy industry. (A.L.B.)

Environmentally damaging electricity trade

Energy Technology Data Exchange (ETDEWEB)

Billette de Villemeur, Etienne [Toulouse School of Economics (IDEI and GREMAQ) (France); Pineau, Pierre-Olivier [HEC Montreal (Canada)

2010-03-15

Electricity trade across regions is often considered welfare enhancing. We show in this paper that this should be reconsidered if environmental externalities are taken into account. We consider two cases where trade is beneficial, before accounting for environmental damages: first, when two regions with the same technology display some demand heterogeneity; second when one region endowed with hydropower arbitrages with its ''thermal'' neighbor. Our results show that under reasonable demand and supply elasticities, trade comes with an additional environmental cost. This calls for integrating environmental externalities into market reforms when redesigning the electricity sector. Two North American applications illustrate our results: trade between Pennsylvania and New York, and trade between hydro-rich Quebec and New York. (author)

Controlling Force and Depth in Friction Stir Welding

Science.gov (United States)

Adams, Glynn; Loftus, Zachary; McCormac, Nathan; Venable, Richard

2005-01-01

Feedback control of the penetration force applied to a pin tool in friction stir welding has been found to be a robust and reliable means for controlling the depth of penetration of the tool. This discovery has made it possible to simplify depth control and to weld with greater repeatability, even on workpieces with long weld joints. Prior to this discovery, depths of penetration in friction stir welding were controlled by hard-tooled roller assemblies or by depth actuators controlled by feedback from such external sensors as linear variable-differential transformers or laser-based devices. These means of control are limited: A hard-tooled roller assembly confines a pin tool to a preset depth that cannot be changed easily during the welding process. A measurement by an external sensor is only an indirect indicative of the depth of penetration, and computations to correlate such a measurement with a depth of penetration are vulnerable to error. The present force-feedback approach exploits the proportionality between the depth and the force of penetration Unlike a depth measurement taken by an external sensor, a force measurement can be direct because it can be taken by a sensor coupled directly to the pin tool. The reading can be processed through a modern electronic servo control system to control an actuator to keep the applied penetration force at the desired level. In comparison with the older depth-control methods described above, this method offers greater sensitivity to plasticizing of the workpiece metal and is less sensitive to process noise, resulting in a more consistent process. In an experiment, a tapered panel was friction stir welded while controlling the force of penetration according to this method. The figure is a plot of measurements taken during the experiment, showing that force was controlled with a variation of 200 lb (890 N), resulting in control of the depth of penetration with a variation of 0.004 in. (0.1 mm).

Externalizing behaviors in preadolescents: familial risk to externalizing behaviors and perceived parenting styles.

Science.gov (United States)

Buschgens, Cathelijne J M; van Aken, Marcel A G; Swinkels, Sophie H N; Ormel, Johan; Verhulst, Frank C; Buitelaar, Jan K

2010-07-01

The aim was to investigate the contribution of familial risk to externalizing behaviors (FR-EXT), perceived parenting styles, and their interactions to the prediction of externalizing behaviors in preadolescents. Participants were preadolescents aged 10-12 years who participated in TRAILS, a large prospective population-based cohort study in the Netherlands (N = 2,230). Regression analyses were used to determine the relative contribution of FR-EXT and perceived parenting styles to parent and teacher ratings of externalizing behaviors. FR-EXT was based on lifetime parental externalizing psychopathology and the different parenting styles (emotional warmth, rejection, and overprotection) were based on the child's perspective. We also investigated whether different dimensions of perceived parenting styles had different effects on subdomains of externalizing behavior. We found main effects for FR-EXT (vs. no FR-EXT), emotional warmth, rejection, and overprotection that were fairly consistent across rater and outcome measures. More specific, emotional warmth was the most consistent predictor of all outcome measures, and rejection was a stronger predictor of aggression and delinquency than of inattention. Interaction effects were found for FR-EXT and perceived parental rejection and overprotection; other interactions between FR-EXT and parenting styles were not significant. Correlations between FR-EXT and perceived parenting styles were absent or very low and were without clinical significance. Predominantly main effects of FR-EXT and perceived parenting styles independently contribute to externalizing behaviors in preadolescents, suggesting FR-EXT and parenting styles to be two separate areas of causality. The relative lack of gene-environment interactions may be due to the epidemiological nature of the study, the preadolescent age of the subjects, the measurement level of parenting and the measurement level of FR-EXT, which might be a consequence of both genetic and

Warm Parenting and Effortful Control in Toddlerhood: Independent and Interactive Predictors of School-Age Externalizing Behavior.

Science.gov (United States)

Reuben, Julia D; Shaw, Daniel S; Neiderhiser, Jenae M; Natsuaki, Misaki N; Reiss, David; Leve, Leslie D

2016-08-01

Externalizing symptoms, such as aggression, impulsivity, and inattention, represent the most common forms of childhood maladjustment (Campbell et al. Development and Psychopathology, 12, 467-488, 2000). Several dimensions of parenting behavior, including overreactive and warm parenting, have been linked to children's conduct problems. However, the majority of these studies involve biologically-related family members, thereby limiting understanding of the role of genetic and/or environmental underpinnings of parenting on child psychopathology. This study extends previous research by exploring associations between overreactive and warm parenting during toddlerhood and school-age externalizing problems, as well as the potential moderating effects of child effortful control (EC) on such associations using a longitudinal adoption design. The sample consisted of 225 adoption-linked families (adoptive parents, adopted child [124 male and 101 female] and birth parent[s]), thereby allowing for a more precise estimate of environmental influences on the association between parenting and child externalizing problems. Adoptive mothers' warm parenting at 27 months predicted lower levels of child externalizing problems at ages 6 and 7. Child EC moderated this association in relation to teacher reports of school-age externalizing problems. Findings corroborate prior research with biological families that was not designed to unpack genetic and environmental influences on associations between parenting and child externalizing problems during childhood, highlighting the important role of parental warmth as an environmental influence.

Selecting Environmental Performance Indicators : The Case of Numico

NARCIS (Netherlands)

Scherpereel, C.; Koppen, van C.S.A.; Heering, G.B.F.

2001-01-01

In order to achieve both efficient and reliable external communication adapted to the company's specific conditions, it is desirable to establish a clear relation between the environmental performance indicators (EPIs) used internally for environmental management and the EPIs used externally for

External audit and the relation between internal auditors,supervisory body and external auditors of the banking sextor in the Republic of Macedonia

OpenAIRE

Josheski, Dushko; Jovanova, Blagica

2012-01-01

There are different types of audit, such as financial audit, regulatory audit, operational audit of performances, audit of information systems, environmental audit and others. But basically, we distinguish two types of audit which will be the main focus of attention in this work. External audit, an Internal audit. In most countries, the external auditor from the public sector reports to parliament and, where relevant, the private sector auditor reports to government (e.g. minis...

External cues challenging the internal appetite control system—Overview and practical implications

NARCIS (Netherlands)

Bilman, Els; Kleef, van Ellen; Trijp, van Hans

2017-01-01

Inadequate regulation of food intake plays an important role in the development of overweight and obesity, and is under the influence of both the internal appetite control system and external environmental cues. Especially in environments where food is overly available, external cues seem to

Internalizing the external costs of biogas supply chains in the Italian energy sector

International Nuclear Information System (INIS)

Patrizio, P.; Leduc, S.; Chinese, D.; Kraxner, F.

2017-01-01

In Italy biogas support schemes are being revised to include subsidies for the production of biomethane. Energy policies should foster environmentally optimal solutions, especially because social acceptance issues often arise in the case of biogas. In this paper we use the external cost methodology to quantify the environmental impact of airborne emissions associated with biogas-based energy vectors and their corresponding fossil substitutes These are evaluated at supply chain level and incorporated in a spatially explicit optimization model. The method is applied to northern Italy to compare the potential impact of alternative policy options. It is found that, while the external costs of biogas-based pathways are always lower than corresponding fossil fuel based pathways, the differences are generally so small that policies based on internalization of external costs alone would not lead to further development of biogas-based technologies. For all utilization pathways, consideration of local externalities leads to a less favourable evaluation of biogas-based technologies, which results in external costs even higher than the substituted fossil fuel if biogas is allocated to local heating. - Highlights: • A MILP model has been developed to optimize the economic and environmental performance of the biogas supply chain. • The external costs methodology has been included in the optimization process. • The emissions of the most relevant pollutants generated along the supply chain have been included in the assessment. • Different biogas utilization pathways have been considered.

Force characteristics in continuous path controlled crankpin grinding

Science.gov (United States)

Zhang, Manchao; Yao, Zhenqiang

2015-03-01

Recent research on the grinding force involved in cylindrical plunge grinding has focused mainly on steady-state conditions. Unlike in conventional external cylindrical plunge grinding, the conditions between the grinding wheel and the crankpin change periodically in path controlled grinding because of the eccentricity of the crankpin and the constant rotational speed of the crankshaft. The objective of this study is to investigate the effects of various grinding conditions on the characteristics of the grinding force during continuous path controlled grinding. Path controlled plunge grinding is conducted at a constant rotational speed using a cubic boron nitride (CBN) wheel. The grinding force is determined by measuring the torque. The experimental results show that the force and torque vary sinusoidally during dry grinding and load grinding. The variations in the results reveal that the resultant grinding force and torque decrease with higher grinding speeds and increase with higher peripheral speeds of the pin and higher grinding depths. In path controlled grinding, unlike in conventional external cylindrical plunge grinding, the axial grinding force cannot be disregarded. The speeds and speed ratios of the workpiece and wheel are also analyzed, and the analysis results show that up-grinding and down-grinding occur during the grinding process. This paper proposes a method for describing the force behavior under varied process conditions during continuous path controlled grinding, which provides a beneficial reference for describing the material removal mechanism and for optimizing continuous controlled crankpin grinding.

Environmental forcing, invasion and control of ecological and epidemiological systems.

Science.gov (United States)

Greenman, J V; Norman, R A

2007-08-07

Destabilising a biological system through periodic or stochastic forcing can lead to significant changes in system behaviour. Forcing can bring about coexistence when previously there was exclusion; it can excite massive system response through resonance, it can offset the negative effect of apparent competition and it can change the conditions under which the system can be invaded. Our main focus is on the invasion properties of continuous time models under periodic forcing. We show that invasion is highly sensitive to the strength, period, phase, shape and configuration of the forcing components. This complexity can be of great advantage if some of the forcing components are anthropogenic in origin. They can be turned into instruments of control to achieve specific objectives in ecology and disease management, for example. Culling, vaccination and resource regulation are considered. A general analysis is presented, based on the leading Lyapunov exponent criterion for invasion. For unstructured invaders, a formula for this exponent can typically be written down from the model equations. Whether forcing hinders or encourages invasion depends on two factors: the covariances between invader parameters and resident populations and the shifts in average resident population levels brought about by the forcing. The invasion dynamics of a structured invader are much more complicated but an analytic solution can be obtained in quadratic approximation for moderate forcing strength. The general theory is illustrated by a range of models drawn from ecology and epidemiology. The relationship between periodic and stochastic forcing is also considered.

Axial force measurement for esophageal function testing

DEFF Research Database (Denmark)

Gravesen, Flemming Holbæk; Funch-Jensen, Peter; Gregersen, Hans

2009-01-01

force (force in radial direction) whereas the bolus moves along the length of esophagus in a distal direction. Force measurements in the longitudinal (axial) direction provide a more direct measure of esophageal transport function. The technique used to record axial force has developed from external...... force transducers over in-vivo strain gauges of various sizes to electrical impedance based measurements. The amplitude and duration of the axial force has been shown to be as reliable as manometry. Normal, as well as abnormal, manometric recordings occur with normal bolus transit, which have been...... documented using imaging modalities such as radiography and scintigraphy. This inconsistency using manometry has also been documented by axial force recordings. This underlines the lack of information when diagnostics are based on manometry alone. Increasing the volume of a bag mounted on a probe...

Effect of ambient humidity on the strength of the adhesion force of single yeast cell inside environmental-SEM

International Nuclear Information System (INIS)

Shen, Yajing; Nakajima, Masahiro; Ridzuan Ahmad, Mohd; Kojima, Seiji; Homma, Michio; Fukuda, Toshio

2011-01-01

A novel method for measuring an adhesion force of single yeast cell is proposed based on a nanorobotic manipulation system inside an environmental scanning electron microscope (ESEM). The effect of ambient humidity on a single yeast cell adhesion force was studied. Ambient humidity was controlled by adjusting the chamber pressure and temperature inside the ESEM. It has been demonstrated that a thicker water film was formed at a higher humidity condition. The adhesion force between an atomic force microscopy (AFM) cantilever and a tungsten probe which later on known as a substrate was evaluated at various humidity conditions. A micro-puller was fabricated from an AFM cantilever by use of focused ion beam (FIB) etching. The adhesion force of a single yeast cell (W303) to the substrate was measured using the micro-puller at the three humidity conditions: 100%, 70%, and 40%. The results showed that the adhesion force between the single yeast cell and the substrate is much smaller at higher humidity condition. The yeast cells were still alive after being observed and manipulated inside ESEM based on the result obtained from the re-culturing of the single yeast cell. The results from this work would help us to understand the ESEM system better and its potential benefit to the single cell analysis research. -- Research highlights: → A nanorobotic manipulation system was developed inside an ESEM. → A micro-puller was designed for single yeast cell adhesion force measurement. → Yeast cells were still alive after being observed and manipulated inside ESEM. → Yeast cell adhesion force to substrate is smaller at high humidity condition than at low humidity condition.

Effect of ambient humidity on the strength of the adhesion force of single yeast cell inside environmental-SEM

Energy Technology Data Exchange (ETDEWEB)

Shen, Yajing, E-mail: shen@robo.mein.nagoya-u.ac.jp [Department of Micro-Nano Systems Engineering, Nagoya University, Nagoya 464-8603 (Japan); Nakajima, Masahiro [Department of Micro-Nano Systems Engineering, Nagoya University, Nagoya 464-8603 (Japan); Ridzuan Ahmad, Mohd [Department of Mechatronics and Robotics, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, Skudai 81310 (Malaysia); Kojima, Seiji; Homma, Michio [Department of Biological Science, Graduate School of Science, Nagoya University, Nagoya 464-8602 (Japan); Fukuda, Toshio [Department of Micro-Nano Systems Engineering, Nagoya University, Nagoya 464-8603 (Japan)

2011-07-15

A novel method for measuring an adhesion force of single yeast cell is proposed based on a nanorobotic manipulation system inside an environmental scanning electron microscope (ESEM). The effect of ambient humidity on a single yeast cell adhesion force was studied. Ambient humidity was controlled by adjusting the chamber pressure and temperature inside the ESEM. It has been demonstrated that a thicker water film was formed at a higher humidity condition. The adhesion force between an atomic force microscopy (AFM) cantilever and a tungsten probe which later on known as a substrate was evaluated at various humidity conditions. A micro-puller was fabricated from an AFM cantilever by use of focused ion beam (FIB) etching. The adhesion force of a single yeast cell (W303) to the substrate was measured using the micro-puller at the three humidity conditions: 100%, 70%, and 40%. The results showed that the adhesion force between the single yeast cell and the substrate is much smaller at higher humidity condition. The yeast cells were still alive after being observed and manipulated inside ESEM based on the result obtained from the re-culturing of the single yeast cell. The results from this work would help us to understand the ESEM system better and its potential benefit to the single cell analysis research. -- Research highlights: {yields} A nanorobotic manipulation system was developed inside an ESEM. {yields} A micro-puller was designed for single yeast cell adhesion force measurement. {yields} Yeast cells were still alive after being observed and manipulated inside ESEM. {yields} Yeast cell adhesion force to substrate is smaller at high humidity condition than at low humidity condition.

Estimation of Externalities for Juragua Nuclear Project

International Nuclear Information System (INIS)

Mora, H. R.; Carbonell, L. T.

2002-01-01

Estimation of externalities allows taking into account environmental impacts due to any activity in total costs calculation. In the present work, the external costs of electricity generation from nuclear energy were calculated considering three scenarios: normal operation (routine releases), accident situation and solid waste disposal. A comparison between these results and those obtained for electricity generation from fossil fuels was made. IAEA proposals of Simplified methodologies were used for externality calculations. The Juragua project was selected as a study case; it is based in two energetic blocks both PWR, VVER 440/318 type with a plant capacity of 417 MWe each. Four impact ways were considered for all scenarios: (1) Inhalation of radionuclides in the air, (2) External irradiation from radionuclides immersed in clouds, (3) External irradiation from deposited radionuclides and (4) Ingestion of radionuclides in agricultural products. Besides, two impact categories (local and regional) for all scenarios were considered. The total cost of externalities was 0.01425 c/kWh, value smaller than the one obtained for electricity generation from fossil fuel (0.256 c/kWh). For the normal operation scenario, the external cost calculated was 0.00112 c/kWh, for accident situation 0.01103 c/kWh, and for the solid wastes management scenario 0.0021 c/kWh. The high value obtained for solid waste disposal scenario is due to repository placement features. (author)

The statistical analysis of the mobility and the labor force use

Directory of Open Access Journals (Sweden)

Daniela-Emanuela Dãnãcicã

2006-05-01

Full Text Available The paper approaches some of the classical methods used in statistics for theanalysis of labor force and proposes new ways of current analysis required foradopting optimal economic patterns and strategies. The proposed methods, thelinear mean deviation used in the analysis of the external mobility of the laborforce, the coefficient of variation used in the analysis of the external mobility of thelabor force and two-dimensional table used the coefficient of internal mobilitycalculation, are illustrated by the premises, the calculus methodology, practicalapplications and guidance for their use in adopting and applying optimal economicpolicy.

Advancing environmental toxicology through chemical dosimetry: External exposures versus tissue residues

Science.gov (United States)

McCarty, L.S.; Landrum, P.F.; Luoma, S.N.; Meador, J.P.; Merten, A.A.; Shephard, B.K.; van Wezelzz, A.P.

2011-01-01

The tissue residue dose concept has been used, although in a limited manner, in environmental toxicology for more than 100 y. This review outlines the history of this approach and the technical background for organic chemicals and metals. Although the toxicity of both can be explained in tissue residue terms, the relationship between external exposure concentration, body and/or tissues dose surrogates, and the effective internal dose at the sites of toxic action tends to be more complex for metals. Various issues and current limitations related to research and regulatory applications are also examined. It is clear that the tissue residue approach (TRA) should be an integral component in future efforts to enhance the generation, understanding, and utility of toxicity testing data, both in the laboratory and in the field. To accomplish these goals, several key areas need to be addressed: 1) development of a risk-based interpretive framework linking toxicology and ecology at multiple levels of biological organization and incorporating organism-based dose metrics; 2) a broadly applicable, generally accepted classification scheme for modes/mechanisms of toxic action with explicit consideration of residue information to improve both single chemical and mixture toxicity data interpretation and regulatory risk assessment; 3) toxicity testing protocols updated to ensure collection of adequate residue information, along with toxicokinetics and toxicodynamics information, based on explicitly defined toxicological models accompanied by toxicological model validation; 4) continued development of residueeffect databases is needed ensure their ongoing utility; and 5) regulatory guidance incorporating residue-based testing and interpretation approaches, essential in various jurisdictions. ??:2010 SETAC.

ExternE transport methodology for external cost evaluation of air pollution

DEFF Research Database (Denmark)

Jensen, S. S.; Berkowicz, R.; Brandt, J.

The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summarised...

Externality costing for hydroelectric projects: Is it desirable? Is it possible?

International Nuclear Information System (INIS)

Bernier, L.

1992-01-01

The assignment of monetary values to environmental and social impacts of hydroelectric projects is discussed. The strengths and weaknesses of the economic approach to externality costing are noted. The problem to be faced is that environmental externalities associated with a hydro project very often involve resources that have little or no relation with the market, such as disturbances of land not used for commercial activities. The valuation of externalities related to thermal power plants is examined to provide lessons for quantifying the externalities of hydro projects. One observation is that there is very little information on the real impacts of such phenomena as the release of greenhouse gases, making quantification of their effect difficult; another is that impacts from atmospheric emissions are well in excess of simple deterioration of material goods or recreational activities that have some relationship to the market. Applied to hydro projects, the lessons from these observations indicate that there are no exact and homogeneous measurement units for impacts of actions such as diking or alteration of wildlife habitats. One approach that has been tried is the contingent valuation method, which relies on asking respondents how much they would pay to avoid an impact or risk. This approach is criticized and it is suggested to experiment with a review of the tradeoffs between several possible environmental impacts defined in a precise manner

Force and time-dependent self-assembly, disruption and recovery of supramolecular peptide amphiphile nanofibers.

Science.gov (United States)

Dikecoglu, F Begum; Topal, Ahmet E; Ozkan, Alper D; Tekin, E Deniz; Tekinay, Ayse B; Guler, Mustafa O; Dana, Aykutlu

2018-07-13

Biological feedback mechanisms exert precise control over the initiation and termination of molecular self-assembly in response to environmental stimuli, while minimizing the formation and propagation of defects through self-repair processes. Peptide amphiphile (PA) molecules can self-assemble at physiological conditions to form supramolecular nanostructures that structurally and functionally resemble the nanofibrous proteins of the extracellular matrix, and their ability to reconfigure themselves in response to external stimuli is crucial for the design of intelligent biomaterials systems. Here, we investigated real-time self-assembly, deformation, and recovery of PA nanofibers in aqueous solution by using a force-stabilizing double-pass scanning atomic force microscopy imaging method to disrupt the self-assembled peptide nanofibers in a force-dependent manner. We demonstrate that nanofiber damage occurs at tip-sample interaction forces exceeding 1 nN, and the damaged fibers subsequently recover when the tip pressure is reduced. Nanofiber ends occasionally fail to reconnect following breakage and continue to grow as two individual nanofibers. Energy minimization calculations of nanofibers with increasing cross-sectional ellipticity (corresponding to varying levels of tip-induced fiber deformation) support our observations, with high-ellipticity nanofibers exhibiting lower stability compared to their non-deformed counterparts. Consequently, tip-mediated mechanical forces can provide an effective means of altering nanofiber integrity and visualizing the self-recovery of PA assemblies.

Externalities: Their role and value in near-term solar power implementation

International Nuclear Information System (INIS)

Swindler, G.

1992-01-01

The total cost of electricity includes social and environmental costs, or externalities, that have traditionally been discluded from the cost of energy. Under current regulatory and public pressure to account for these costs as they vary between generating resources, externalities are being reviewed and are gradually being added to the construction and operation costs of all generating resources. Accounting for externalities is described as being obligatory for the electric utility industry. This paper analyzes a variety of quantifiable externalities in comparing solar and wind power to coal, nuclear, natural gas and oil. The inclusion of externalities in full-cost resource accounting is shown to make renewable resources such as solar and wind more competitive in a levelized market

A method for external measurement of toroidal equilibrium parameters

International Nuclear Information System (INIS)

Brunsell, P.; Hellblom, G.; Brynolf, J.

1992-01-01

A method has been developed for determining from external magnetic field measurements the horizontal shift, the vertical shift and the poloidal field asymmetry parameter (Λ) of a toroidal plasma in force equilibrium. The magnetic measurements consist of two toroidal differential flux loops, giving the average vertical magnetic field and the average radial magnetic field respectively, together with cosine-coils for obtaining the m=1 cosine harmonic of the external poloidal magnetic field component. The method is used to analyse the evolution of the toroidal equilibrium during reversed-field pinch discharges in the Extrap T1-U device. We find that good equilibrium control is needed for long plasma pulses. For non-optimized externally applied vertical fields, the diagnostic clearly shows a horizontal drift motion of the pinch resulting in earlier discharge termination. (au)

External fixation using locking plate in distal tibial fracture: a finite element analysis.

Science.gov (United States)

Zhang, Jingwei; Ebraheim, Nabil; Li, Ming; He, Xianfeng; Schwind, Joshua; Liu, Jiayong; Zhu, Limei

2015-08-01

External fixation of tibial fractures using a locking plate has been reported with favorable results in some selected patients. However, the stability of external plate fixation in this fracture pattern has not been previously demonstrated. We investigated the stability of external plate fixation with different plate-bone distances. In this study, the computational processing model of external fixation of a distal tibial metaphyseal fracture utilizing the contralateral femoral less invasive stabilization system plate was analyzed. The plate was placed on the anteromedial aspect of tibia with different plate-bone distances: 1, 10, 20, and 30 mm. Under axial load, the stiffness of construct in all groups was higher than intact tibia. Under axial load with an internal rotational force, the stiffness of construct with 1 and 10 mm plate-bone distances was similar to that of an intact tibia and the stiffness of the construct with 20 and 30 mm distances was lower than that of an intact tibia. Under axial load with an external rotational force, the stiffness of the construct in all groups was lower than that of an intact tibia. The maximum plate stresses were concentrated at the two most distal screws and were highest in the construct with the 10 mm plate-bone distance, and least in the construct with a 1 mm plate-bone distance. To guarantee a stable external plate fixation in distal tibial fracture, the plate-bone distance should be less than 30 mm.

Fluxon interaction with external rf radiation in Josephson junctions

DEFF Research Database (Denmark)

Kivshar, Yuri S.; Olsen, Ole H.; Samuelsen, Mogens Rugholm

1993-01-01

. It is shown that due to excitation of a standing linear wave by the driving force, the fluxon motion is strongly influenced by a periodic (averaged) potential similar to the Peierls-Nabarro potential in a discrete chain. This effective potential decreases in the direction of the boundary where the external rf...

Energy distributions of an ion in a radio-frequency trap immersed in a buffer gas under the influence of additional external forces

Science.gov (United States)

Rouse, I.; Willitsch, S.

2018-04-01

An ion held in a radio-frequency trap interacting with a uniform buffer gas of neutral atoms develops a steady-state energy distribution characterized by a power-law tail at high energies instead of the exponential decay characteristic of thermal equilibrium. We have previously shown that the Tsallis statistics frequently used as an empirical model for this distribution is a good approximation when the ion is heated due to a combination of micromotion interruption and exchange of kinetic energy with the buffer gas [Rouse and Willitsch, Phys. Rev. Lett. 118, 143401 (2017), 10.1103/PhysRevLett.118.143401]. Here, we extend our treatment to include the heating due to additional motion of the ion caused by external forces, including the "excess micromotion" induced by uniform electric fields and rf phase offsets. We show that this also leads to a Tsallis distribution with a potentially different power-law exponent from that observed in the absence of this additional forced motion, with the difference increasing as the ratio of the mass of the neutral atoms to that of the ion decreases. Our results indicate that unless the excess micromotion is minimized to a very high degree, then even a system with very light neutrals and a heavy ion does not exhibit a thermal distribution.

Scanning the business external environment for information: evidence from Greece

Directory of Open Access Journals (Sweden)

L. Kourteli

2005-01-01

Full Text Available Introduction. This paper examines the business external environment scanning theory for information in the context of Greece. Method. A questionnaire was developed to explore the relationships between general and task business environment, perceived uncertainty, scanning strategy, and sources of information with respect to type of environment, size and industry.The research was based on a sample of 144 private organizations operating in North Greece. Analysis. Data collected were analysed using SPSS. The statistical procedures of chi-squared homogeneity test, ANOVA, Duncan's test of homogeneity of means, and related samples t-test were followed for testing the hypotheses developed. Results. The results show that perceived uncertainty of the general and task business external environment factors depend on the type of the environment, size of organization, and industry where the organizations operate; organizations adapt their scanning strategy to the complexity of the environment; personal sources of information seem to be more important than impersonal sources; external sources of information are equally important with internal sources; and higher levels of environmental uncertainty are associated with higher levels of scanning the various sources. Conclusion. Business external environment scanning of information is influenced by the characteristics of the organizations themselves and by the characteristics of the external environment within which the organizations operate. The study contributes to both environmental scanning theory and has important messages for practitioners.

Can shoulder joint reaction forces be estimated by neural networks?

NARCIS (Netherlands)

de Vries, W.H.K.; Veeger, H.E.J.; Baten, C.T.M.; van der Helm, F.C.T.

2016-01-01

To facilitate the development of future shoulder endoprostheses, a long term load profile of the shoulder joint is desired. A musculoskeletal model using 3D kinematics and external forces as input can estimate the mechanical load on the glenohumeral joint, in terms of joint reaction forces. For long

Nonlinear oscillations of the FitzHugh-Nagumo equations under combined external and two-frequency parametric excitations

International Nuclear Information System (INIS)

Tatchim Bemmo, D.; Siewe Siewe, M.; Tchawoua, C.

2011-01-01

The continuous FitzHugh-Nagumo (FHN for short) model is transformed into modified van der Pol oscillator with asymmetry under external and two-frequency parametric excitations. At the first, the dependence of the solutions on a combined external and two-frequency parametric stimulus forcing is investigated. By using the multiple scale method, ranges of applied current and/or parametric forcing in which nonlinear oscillations are observed are described. Second, when the multiple scale method cannot be used, we numerically prove that in the modified van der Pol oscillator with asymmetry under external and two-frequency parametric excitations, chaos and periodic solution depending on the combination between different frequencies of the model should appear. We also show that the amplitude of the oscillations can be reduced or increased. To do this, we perform the study of the FHN model by choosing a range of parameters exhibiting Hopf bifurcation and two qualitative different regimes in phase portrait. - Highlights: → We model both external and two-frequency parametric excitations in FHN equations. → We examine effects of harmonic forcing on coupled nonlinear oscillator. → Jump and hysteresis phenomena are observed in the dynamical response. → By increasing the constant stimulus we obtain limit cycle. → Some combinations of frequencies produce limit cycle and chaos for other.

International labor migration and external debt.

Science.gov (United States)

Bustamante, J A

1987-01-01

The prevailing Mexican and US definitions of undocumented migration are poles apart. The US views it as a criminal problem. Mexicans view the undocumented migrants as actors in an economic game in which the rules are extremely disadvantageous to these migrants. Migrants themselves and their communities view the undocumented as a positive element. It is necessary to move toward a bilateral focus and bilateral negotiation on the issue of migratory workers. This proposal derives from several assumptions: 1) the external debt is a bilateral or multilateral issue, 2) it is important to avoid forcing debtor countries to choose between stimulating economic growth or making payment on their foreign debt, 3) prevailing public opinion in the US favors halting undocumented migration, 4) the US views the migration of undocumented Mexicans as the result of forces endogenous to Mexico and exogenous to the US, 5) the US views both Mexico's ability to make payment on its external debt and to halt emigration as tied to the Mexican government's ability or inability to reconcile political stability with scarce monetary resources, and 6) political instability in Mexico could augment emigration to the US and undermine Mexico's ability to address its foreign debt. The following proposal suggests means to link negotiation on the external debt to that of undocumented migration: 1) The Mexican government could reach an accord with the US to channel a portion of the actual interest on the external debt as a fund to be invested in Mexico to construct a system of labor intensive agroindustrial productive units designed to attract former or potential migratory workers; 2) the total amount of these funds would be deducted from interest payments on the principal of the actual external debt and redefined as an ad hoc loan to Mexico to finance these production units; 3) part of the production from these units would be incorporated into ongoing US food relief and food assistance programs; 4) the

The Effect of Foot Progression Angle on Knee Joint Compression Force during Walking

DEFF Research Database (Denmark)

Baldvinsson, Henrik Koblauch; Heilskov-Hansen, Thomas; Alkjær, Tine

2013-01-01

males walked at a fixed speed of 4.5 km/h under three conditions: Normal walking, internally rotated and externally rotated. All gait-trials were recorded by six infrared cameras. Net joint moments were calculated by 3D inverse dynamics. The results revealed that the medial knee joint compartment......It is unclear how rotations of the lower limb affect the knee joint compression forces during walking. Increases in the frontal plane knee moment have been reported when walking with internally rotated feet and a decrease when walking with externally rotated feet. The aim of this study...... was to investigate the knee joint compressive forces during walking with internal, external and normal foot rotation and to determine if the frontal plane knee joint moment is an adequate surrogate for the compression forces in the medial and lateral knee joint compartments under such gait modifications. Ten healthy...

Modelling Inter-Particle Forces and Resulting Agglomerate Sizes in Cement-Based Materials

DEFF Research Database (Denmark)

Kjeldsen, Ane Mette; Geiker, Mette Rica

2005-01-01

The theory of inter-particle forces versus external shear in cement-based materials is reviewed. On this basis, calculations on maximum agglomerate size present after the combined action of superplasticizers and shear are carried out. Qualitative experimental results indicate that external shear ...

Negatively correlated local and global stock externalities: tax or subsidy?

International Nuclear Information System (INIS)

Zili Yang

2006-01-01

Fossil fuel combustion generates both CO 2 and SO 2 . CO 2 is the most important greenhouse gas; SO 2 can cause serious local pollution. But it can alleviate the potential global warming because of negative radiative forcing. Such a phenomenon can be characterized as negatively correlated local and global stock externalities. In this paper, we set up an optimal control problem of negatively correlated local and global stock externality provision. The efficiency conditions for this problem are derived. These conditions modify the Samuelson rules for optimal provision of externalities. In addition, we examine several policy related scenarios of negatively correlated local and global stock externality provisions. Finally, we discuss policy implications and limitation of the theoretical results derived in this paper. We also indicate applications of the theoretical results here to empirical research, particularly to economic analysis of multiple-gas issues in climate change. (Author)

Environmental Assessment: General Plan-Based Environmental Impact Analysis Process, Laughlin Air Force Base

Science.gov (United States)

2007-05-01

BASED ENVIROMENTAL IMPACT ANALYSIS PROCESS LAUGHLIN AIR FORCE BASE, TEXAS AGENCY: 47th Flying Training Wing (FTW), Laughlin Air Force Base (AFB), Texas...m3 micrograms per cubic meter US United States USACE United States Army Corp of Engineers USC United States Code USCB United States Census Bureau...effects and annoyance in that very few flight operations and ground engine runs occur between 2200 hours and 0700 hours. BMPs include restricting the

Reconstruction of driving forces through recurrence plots

International Nuclear Information System (INIS)

Tanio, Masaaki; Hirata, Yoshito; Suzuki, Hideyuki

2009-01-01

We consider the problem of reconstructing one-dimensional driving forces only from the observations of driven systems. We extend the approach presented in a seminal paper [M.C. Casdagli, Physica D 108 (1997) 12] and propose a method that is robust and has wider applicability. By reinterpreting the work of Thiel et al. [M. Thiel, M.C. Romano, J. Kurths, Phys. Lett. A 330 (2004) 343], we formulate the reconstruction problem as a combinatorial optimization problem and relax conditions by assuming that a driving force is continuous. The method is demonstrated by using a tent map driven by an external force.

Oblique abdominal muscle activity in response to external perturbations when pushing a cart.

Science.gov (United States)

Lee, Yun-Ju; Hoozemans, Marco J M; van Dieën, Jaap H

2010-05-07

Cyclic activation of the external and internal oblique muscles contributes to twisting moments during normal gait. During pushing while walking, it is not well understood how these muscles respond to presence of predictable (cyclic push-off forces) and unpredictable (external) perturbations that occur in pushing tasks. We hypothesized that the predictable perturbations due to the cyclic push-off forces would be associated with cyclic muscle activity, while external perturbations would be counteracted by cocontraction of the oblique abdominal muscles. Eight healthy male subjects pushed at two target forces and two handle heights in a static condition and while walking without and with external perturbations. For all pushing tasks, the median, the static (10th percentile) and the peak levels (90th percentile) of the electromyographic amplitudes were determined. Linear models with oblique abdominal EMGs and trunk angles as input were fit to the twisting moments, to estimate trunk stiffness. There was no significant difference between the static EMG levels in pushing while walking compared to the peak levels in pushing while standing. When pushing while walking, the additional dynamic activity was associated with the twisting moments, which were actively modulated by the pairs of oblique muscles as in normal gait. The median and static levels of trunk muscle activity and estimated trunk stiffness were significantly higher when perturbations occurred than without perturbations. The increase baseline of muscle activity indicated cocontraction of the antagonistic muscle pairs. Furthermore, this cocontraction resulted in an increased trunk stiffness around the longitudinal axis. Copyright 2010 Elsevier Ltd. All rights reserved.

External Costs Related to Power Production Technologies

DEFF Research Database (Denmark)

Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

1997-01-01

of the Danish part of the project is to implement the framework for externality evaluation, for three different power plants located in Denmark. The paper will focus on the assessment of the impacts of the whole fuel cycles for wind, natural gas and biogas. Priority areas for environmental impact assessment...

Ponderomotive forces in electrodynamics of moving media: The Minkowski and Abraham approaches

Science.gov (United States)

Nesterenko, V. V.; Nesterenko, A. V.

2016-09-01

In the general setting of the problem, the explicit compact formulae are derived for the ponderomotive forces in the macroscopic electrodynamics of moving media in the Minkowski and Abraham approaches. Taking account of the Minkowski constitutive relations and making use of a special representation for the Abraham energy-momentum tensor enable one to obtain a compact expression for the Abraham force in the case of arbitrary dependence of the medium velocity on spatial coordinates and the time and for nonstationary external electromagnetic field. We term the difference between the ponderomotive forces in the Abraham and Minkowski approaches as the Abraham force not only under consideration of media at rest but also in the case of moving media. The Lorentz force is found which is exerted by external electromagnetic field on the conduction current in a medium, the covariant Ohm law, and the constitutive Minkowski relations being taken into account. The physical argumentation is traced for the definition of the 4-vector of the ponderomotive force as the 4-divergence of the energy-momentum tensor of electromagnetic field in a medium.

Lie-admissible structure of Hamilton's original equations with external terms

International Nuclear Information System (INIS)

Santilli, R.M.

1991-09-01

As a necessary additional step in preparation of our operator studies of closed nonhamiltonian systems, in this note we consider the algebraic structure of the original equations proposed by Lagrange and Hamilton, those with external terms representing precisely the contact nonpotential forces of the interior dynamical problem. We show that the brackets of the theory violate the conditions to characterize any algebra. Nevertheless, when properly written, they characterize a covering of the Lie-isotopic algebras called Lie-admissible algebras. It is indicated that a similar occurrence exists for conventional operator treatments, e.g. for nonconservative nuclear cases characterized by nonhermitean Hamiltonians. This occurrence then prevents a rigorous treatment of basic notions, such as that of angular momentum and spin spin, which are centrally dependent on the existence of a consistent algebraic structure. The emergence of the Lie-admissible algebras is therefore expected to be unavoidable for any rigorous operator treatment of open systems with nonlinear, nonlocal and nonhamiltonian external forces. (author). 14 refs, 1 fig

A compact atomic force-scanning tunneling microscope for studying microelectronics and environmental aerosols

International Nuclear Information System (INIS)

Chen, G.

1996-06-01

This dissertation describes the characteristics and the construction of a compact atomic force/scanning tunneling microscope (AFM/STM). The basics and the method of preparing a tunneling junction between a chemically etched tunneling tip and a micro-manufactured cantilever is outlined by analyzing the forces between tunneling tip and cantilever as well as between force-sensing tip and sample surfaces. To our best knowledge this instrument is the first one using a commercial cantilever with only one piezoelectric tube carrying the whole tunneling sensor. The feedback control system has been optimized after a careful analysis of the electronic loop characteristics. The mode of operation has been determined by analyzing the dynamic characteristics of the scan heads and by investigating the time characteristics of the data acquisition system. The vibration isolation system has been calibrated by analyzing the characteristics of the damping setup and the stiffness of the scan head. The calculated results agree well with the measured ones. Also, a software package for data acquisition and real time display as well as for image processing and three-dimensional visualization has been developed. With this home-made software package, the images can be processed by means of a convolution filter, a Wiener filter and other 2-D FFT filters, and can be displayed in different ways. Atomic resolution images of highly oriented pyrolytic graphite (HOPG) and graphite surfaces have been obtained in AFM and STM mode. New theoretical explanations have been given for the observed anomalous STM and AFM images of graphite by calculating the asymmetric distribution of quantum conductance and tip-surface forces on a graphite surface. This not only resolved the theoretical puzzles of STM and AFM of graphite, but also revealed the relation between atomic force microscopy and scanning tunneling microscopy of graphite. Applications of STM and AFM to micro-electronic devices have been investigated

Simulated Aging of Spacecraft External Materials on Orbit

Science.gov (United States)

Khatipov, S.

Moscow State Engineering Physics Institute (MIFI), in cooperation with Air Force Research Laboratory's Satellite Assessment Center (SatAC), the European Office of Aerospace Research and Development (EOARD), and the International Science and Technology Center (ISTC), has developed a database describing the changes in optical properties of materials used on the external surfaces of spacecraft due to space environmental factors. The database includes data acquired from tests completed under contract with the ISTC and EOARD, as well as from previous Russian materials studies conducted within the last 30 years. The space environmental factors studied are for those found in Low Earth Orbits (LEO) and Geosynchronous orbits (GEO), including electron irradiation at 50, 100, and 200 keV, proton irradiation at 50, 150, 300, and 500 keV, and ultraviolet irradiation equivalent to 1 sun-year. The material characteristics investigated were solar absorption (aS), spectral reflectance (rl), solar reflectance (rS), emissivity (e), spectral transmission coefficient (Tl), solar transmittance (TS), optical density (D), relative optical density (D/x), Bi-directional Reflectance Distribution Function (BRDF), and change of appearance and color in the visible wavelengths. The materials tested in the project were thermal control coatings (paints), multilayer insulation (films), and solar cells. The ability to predict changes in optical properties of spacecraft materials is important to increase the fidelity of space observation tools, better understand observation of space objects, and increase the longevity of spacecraft. The end goal of our project is to build semi-empirical mathematical models to predict the long-term effects of space aging as a function of time and orbit.

Externalizing disorders: cluster 5 of the proposed meta-structure for DSM-V and ICD-11.

Science.gov (United States)

Krueger, R F; South, S C

2009-12-01

The extant major psychiatric classifications DSM-IV and ICD-10 are purportedly atheoretical and largely descriptive. Although this achieves good reliability, the validity of a medical diagnosis is greatly enhanced by an understanding of the etiology. In an attempt to group mental disorders on the basis of etiology, five clusters have been proposed. We consider the validity of the fifth cluster, externalizing disorders, within this proposal. We reviewed the literature in relation to 11 validating criteria proposed by the Study Group of the DSM-V Task Force, in terms of the extent to which these criteria support the idea of a coherent externalizing spectrum of disorders. This cluster distinguishes itself by the central role of disinhibitory personality in mental disorders spread throughout sections of the current classifications, including substance dependence, antisocial personality disorder and conduct disorder. Shared biomarkers, co-morbidity and course offer additional evidence for a valid cluster of externalizing disorders. Externalizing disorders meet many of the salient criteria proposed by the Study Group of the DSM-V Task Force to suggest a classification cluster.

Directed motion generated by heat bath nonlinearly driven by external noise

International Nuclear Information System (INIS)

Chaudhuri, J Ray; Barik, D; Banik, S K

2007-01-01

Based on the heat bath system approach where the bath is nonlinearly modulated by an external Gaussian random force, we propose a new microscopic model to study directed motion in the overdamped limit for a nonequilibrium open system. Making use of the coupling between the heat bath and the external modulation as a small perturbation, we construct a Langevin equation with multiplicative noise- and space-dependent dissipation and the corresponding Fokker-Planck-Smoluchowski equation in the overdamped limit. We examine the thermodynamic consistency condition and explore the possibility of observing a phase-induced current as a consequence of state-dependent diffusion and, necessarily, nonlinear driving of the heat bath by the external noise

Directed motion generated by heat bath nonlinearly driven by external noise

Energy Technology Data Exchange (ETDEWEB)

Chaudhuri, J Ray [Department of Physics, Katwa College, Katwa, Burdwan 713 130, West Bengal (India); Barik, D [Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700 032 (India); Banik, S K [Department of Physics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061-0435 (United States)

2007-12-07

Based on the heat bath system approach where the bath is nonlinearly modulated by an external Gaussian random force, we propose a new microscopic model to study directed motion in the overdamped limit for a nonequilibrium open system. Making use of the coupling between the heat bath and the external modulation as a small perturbation, we construct a Langevin equation with multiplicative noise- and space-dependent dissipation and the corresponding Fokker-Planck-Smoluchowski equation in the overdamped limit. We examine the thermodynamic consistency condition and explore the possibility of observing a phase-induced current as a consequence of state-dependent diffusion and, necessarily, nonlinear driving of the heat bath by the external noise.

Effect of external magnetic effect of external magnetic field annealing on magnetic texture of Mo containing NANOPERM-type alloys

International Nuclear Information System (INIS)

Kanuch, T.; Miglierini, M.; Greneche, J.-M.; Skorvanek, I.; Schaaf, P.

2006-01-01

External magnetic fields are known to modify microstructure of materials during their solidification and/or crystallisation. In an external magnetic field strong particle to particle interactions lead to a highly anisotropic microstructure. If the alloy is in ferromagnetic state, stronger particle magnetization - external field interactions and also particle-to-particle couplings are expected. To reveal the magnetic texture, originally amorphous precursors of Fe 76 Mo 8 Cu 1 B 15 were annealed at 510 grad C and 550 grad C in an external longitudinal and transverse magnetic field of 0.025 T and 0.8 T, respectively. Magnetic measurements were applied to follow the changes of saturation magnetization and coercive force. Moessbauer experiments were performed at room and liquid nitrogen temperature to provide an information about orientation of with respect to an external magnetic field. The obtained results were compared with those achieved on zero field annealed samples. We can conclude that such a low external magnetic fields applied during crystallisation cause no significant changes in the magnetic microstructural anisotropy. Afterwards, magneto-optical Kerr effect (MOKE) was applied to investigate possible changes at the surface of the ribbon as a function of annealing temperature and applied magnetic field. We observed combination of uniaxial anisotropy, which originates from the shape anisotropy, and four-fold anisotropy, which is a contribution from crystallites of nanometre size embedded in the residual amorphous matrix. We expect more pronounced effects on cobalt substituted (Fe1 -x Co x ) 76 Mo 8 Cu 1 B 15 alloy. (authors)

Can intraseasonal to decadal forecasts benefit from from consideration of lunar forcing?

CSIR Research Space (South Africa)

Malherbe, J

2014-10-01

Full Text Available A possible forcing mechanism for intra-seasonal rainfall distribution to bi-decadal climate variability is explored. The atmospheric response to external forcing is demonstrated at a daily and annual time scale by noting variation in the Southern...

Assessment of the externalities of biomass energy for electricity production

Energy Technology Data Exchange (ETDEWEB)

Linares, P; Leal, J; Saez, R M

1996-10-01

This study presents a methodology for the quantification of the socioeconomic and environmental externalities of the biomass fuel cycle. It is based on the one developed by the ExternE Project of the European Commission, based in turn in the damage function approach, and which has been extended and modified for a better adaptation to biomass energy systems. The methodology has been applied to a 20 MW biomass power plant, fueled by Cynara cardunculus, in southern Spain. The externalities addressed have been macroeconomic effects, employment, CO{sub 2}, fixation, erosion, and non-point source pollution. The results obtained should be considered only as subtotals, since there are still other externalities to be quantified. anyway, and in spite of the uncertainty existing, these results suggest that total cost (those including internal and external costs) of biomass energy are lower than those of conventional energy sources, what, if taken into account, would make biomass more competitive than it is now. (Author)

Designing an experiment to measure cellular interaction forces

Science.gov (United States)

McAlinden, Niall; Glass, David G.; Millington, Owain R.; Wright, Amanda J.

2013-09-01

Optical trapping is a powerful tool in Life Science research and is becoming common place in many microscopy laboratories and facilities. The force applied by the laser beam on the trapped object can be accurately determined allowing any external forces acting on the trapped object to be deduced. We aim to design a series of experiments that use an optical trap to measure and quantify the interaction force between immune cells. In order to cause minimum perturbation to the sample we plan to directly trap T cells and remove the need to introduce exogenous beads to the sample. This poses a series of challenges and raises questions that need to be answered in order to design a set of effect end-point experiments. A typical cell is large compared to the beads normally trapped and highly non-uniform - can we reliably trap such objects and prevent them from rolling and re-orientating? In this paper we show how a spatial light modulator can produce a triple-spot trap, as opposed to a single-spot trap, giving complete control over the object's orientation and preventing it from rolling due, for example, to Brownian motion. To use an optical trap as a force transducer to measure an external force you must first have a reliably calibrated system. The optical trapping force is typically measured using either the theory of equipartition and observing the Brownian motion of the trapped object or using an escape force method, e.g. the viscous drag force method. In this paper we examine the relationship between force and displacement, as well as measuring the maximum displacement from equilibrium position before an object falls out of the trap, hence determining the conditions under which the different calibration methods should be applied.

Biofuel production system with operation flexibility: Evaluation of economic and environmental performance under external disturbance

Science.gov (United States)

Kou, Nannan

Biomass derived liquid hydrocarbon fuel (biofuel) has been accepted as an effective way to mitigate the reliance on petroleum and reduce the greenhouse gas emissions. An increasing demand for second generation biofuels, produced from ligno-cellulosic feedstock and compatible with current infrastructure and vehicle technologies, addresses two major challenges faced by the current US transportation sector: energy security and global warming. However, biofuel production is subject to internal disturbances (feedstock supply and commodity market) and external factors (energy market). The biofuel industry has also heavily relied on government subsidy during the early development stages. In this dissertation, I investigate how to improve the economic and environmental performance of biorefineries (and biofuel plant), as well as enhance its survivability under the external disturbances. Three types of disturbance are considered: (1) energy market fluctuation, (2) subsidy policy uncertainty, and (3) extreme weather conditions. All three factors are basically volatile, dynamic, and even unpredictable, which makes them difficult to model and have been largely ignored to date. Instead, biofuel industry and biofuel research are intensively focused on improving feedstock conversion efficiency and capital cost efficiency while assuming these advancements alone will successfully generate higher profit and thus foster the biofuel industry. The collapse of the largest corn ethanol biofuel company, Verasun Energy, in 2008 calls into question this efficiency-driven approach. A detailed analysis has revealed that although the corn ethanol plants operated by Verasun adopted the more efficient (i.e. higher ethanol yield per bushel of corn and lower capital cost) dry-mill technology, they could not maintain a fair profit margin under fluctuating market condition which made ethanol production unprofitable. This is because dry-mill plant converts a single type of biomass feedstock (corn

The effect of different environmental factors on force degradation of three common systems of orthodontic space closure.

Science.gov (United States)

Oshagh, Morteza; Khajeh, Farzaneh; Heidari, Somayeh; Torkan, Sepideh; Fattahi, Hamid Reza

2015-01-01

Different environmental conditions, such as high temperature or exposure to some chemical agents, may affect the force decay of different methods of space closure during orthodontic treatment. The aim of this in vitro study was to evaluate the force decay pattern in the presence of tea as a popular drink in some parts of the world and two mouthwashes that are usually prescribed by the orthodontist once the treatment is in progress. Elastic chain (EC), nickel-titanium (Ni-Ti) closed coil spring and tie-back (TB) method were used as the means of space closure. The specimens were placed in five different media: Hot tea, hot water (65°), chlorhexidine mouthwash, fluoride mouthwash and the control group (water at 37°). The specimens were stretched 25 mm and the elastic force of three systems was measured at the beginning of the study, after 24 h, after 1 week and after 3 weeks. One-way ANOVA was used to compare the results between the groups and Duncan test was carried out to compare the sets of means in different groups (P ≤ 0.05). Tea increases the force decay in the EC and TB groups. Oral mouthwashes also resulted in more rapid force decay than the control group. EC and Ni-Ti groups were not much affected in the presence of oral mouthwashes. Regarding the immersion media, TB method showed the biggest variation in different media and Ni-Ti coil spring was least affected by the type of media.

40 CFR 65.45 - External floating roof converted into an internal floating roof.

Science.gov (United States)

2010-07-01

... External floating roof converted into an internal floating roof. The owner or operator who elects to... 40 Protection of Environment 15 2010-07-01 2010-07-01 false External floating roof converted into an internal floating roof. 65.45 Section 65.45 Protection of Environment ENVIRONMENTAL PROTECTION...

External costs of electricity production: recent developments

International Nuclear Information System (INIS)

Beutier, D.

1995-01-01

The external costs of energy use, or the environmental effects not included in the market pricing system, must at some point be borne by society. This paper argues that the true cost of energy, including the remedying or prevention of its environmetnal consequences, should be included in the price paid by the consumer as this is the only effective method of minimizing the burden of environmental damage. The difficulties of quantifying the value of such damage and internalising it within power prices is described with reference to work in a number of countries. (UK)

Choosing in Freedom or Forced to Choose? Introspective Blindness to Psychological Forcing in Stage-Magic

Science.gov (United States)

Shalom, Diego E.; de Sousa Serro, Maximiliano G.; Giaconia, Maximiliano; Martinez, Luis M.; Rieznik, Andres; Sigman, Mariano

2013-01-01

We investigated an individual ability to identify whether choices were made freely or forced by external parameters. We capitalized on magical setups where the notion of psychological forcing constitutes a well trodden path. In live stage magic, a magician guessed cards from spectators while inquiring how freely they thought they had made the choice. Our data showed a marked blindness in the introspection of free choice. Spectators assigned comparable ratings when choosing the card that the magician deliberately forced them compared to any other card, even in classical forcing, where the magician literally handles a card to the participant This observation was paralleled by a laboratory experiment where we observed modest changes in subjective reports by factors with drastic effect in choice. Pupil dilatation, which is known to tag slow cognitive events related to memory and attention, constitutes an efficient fingerprint to index subjective and objective aspects of choice. PMID:23516455

failure analysis and shock protection of external hard disk drive

African Journals Online (AJOL)

user

model its structural responses to free fall drop-impact shock and vibration. Secondly, the hard ... Keywords: Free fall, impact force, Shock, Vibration, Stress, Reliability, Modeling, Simulation External Hard disk drive. 1. ..... on the disk, it could initiate process which could .... [19] Katta, P.: MATLAB Guide to Finite Elements - An.

The Estimation of Externalities Resulting from the Electricity Generation

Energy Technology Data Exchange (ETDEWEB)

Jeong, Jong Tae; Ha, Jae Joo

2003-03-15

The methodology, program, and the representative results for the estimation of externalities was reviewed. The review of them are based on the ExternE Project which is a representative research project for the estimation of externalities resulting from the various energy generating systems. The results for the study will be used as basic data for the comparative study on the integrated risk estimation for various energy generating systems including nuclear power plants. Also, these results will be used as comparative data in the establishment of a integrated comparative risk assessment tool and in the comparative study of the impacts resulting from the various electricity generating systems. These studies make it possible to compare the environmental impacts of nuclear power generation and other electricity generation systems. Therefore, this will of use in the enhancement of public acceptance of nuclear power generation.

The Estimation of Externalities Resulting from the Electricity Generation

International Nuclear Information System (INIS)

Jeong, Jong Tae; Ha, Jae Joo

2003-03-01

The methodology, program, and the representative results for the estimation of externalities was reviewed. The review of them are based on the ExternE Project which is a representative research project for the estimation of externalities resulting from the various energy generating systems. The results for the study will be used as basic data for the comparative study on the integrated risk estimation for various energy generating systems including nuclear power plants. Also, these results will be used as comparative data in the establishment of a integrated comparative risk assessment tool and in the comparative study of the impacts resulting from the various electricity generating systems. These studies make it possible to compare the environmental impacts of nuclear power generation and other electricity generation systems. Therefore, this will of use in the enhancement of public acceptance of nuclear power generation

External Costs Associated with Electricity Generation in Lithuania: Impact of Ignalina NPP Closure

International Nuclear Information System (INIS)

Streimikiene, D.

2000-01-01

Sustainability and development have been founded on continuing growth in energy demand and distribution, and management of natural resources through proper allocation and efficiency. It is clear that the use of energy in all its forms and applications provides an enormous benefit to society. However, it is also associated with numerous environmental and social challenges, such as, e.g., the health effects of air pollution. These burdens are referred to as external costs, as they have not been included in the market price of energy. The purpose of externalities research is to quantify damages in order to allow rational decisions to be made that weigh the benefits of actions to reduce externalities against the costs of doing so. Ultimately, market failure could be reduced by internalization of the external costs during energy planning. The paper deals with the problems of external costs associated with electricity generation in Lithuania and evaluates the environmental impact related to increased atmospheric pollution when the first unit at Ignalina NPP will be closed in 2005. Simplified methodology for the evaluation of external costs based on Impact Pathway Approach developed by International Atomic Energy Agency was applied. Achieved results indicate that due to the increased atmospheric pollution the external costs associated with electricity generation in the case of the first unit closure at Ignalina NPP would amount to 130 million USD. (author)

Externalities of the energy. The nuclear case

International Nuclear Information System (INIS)

Notari, Carla; Perl, Hugo

2005-01-01

When referring to private energy cost, which reflects the market value of energy, important elements are left aside in the evaluation process. These elements or externalities have an impact on third parties. The impact can be positive or negative and nowadays it is increasingly relevant to take them into account and include them in the project evaluation, specially when we are looking for sustainable development. The environmental impact and health effects are the most visible items but not the unique which generate externalities. The supply security, prices stability, employment impact and trade balance, are also important factors, although not much improvement has been achieved in their quantitative evaluation. (author) [es

Environmental conditions using thermal-hydraulics computer code GOTHIC for beyond design basis external events

International Nuclear Information System (INIS)

Pleskunas, R.J.

2015-01-01

In response to the Fukushima Dai-ichi beyond design basis accident in March 2011, the Nuclear Regulatory Commission (NRC) issued Order EA-12-049, 'Issuance of Order to Modify Licenses with Regard to Requirements for Mitigation Strategies Beyond-Design-Basis-External-Events'. To outline the process to be used by individual licensees to define and implement site-specific diverse and flexible mitigation strategies (FLEX) that reduce the risks associated with beyond design basis conditions, Nuclear Energy Institute document NEI 12-06, 'Diverse and Flexible Coping Strategies (FLEX) Implementation Guide', was issued. A beyond design basis external event (BDBEE) is postulated to cause an Extended Loss of AC Power (ELAP), which will result in a loss of ventilation which has the potential to impact room habitability and equipment operability. During the ELAP, portable FLEX equipment will be used to achieve and maintain safe shutdown, and only a minimal set of instruments and controls will be available. Given these circumstances, analysis is required to determine the environmental conditions in several vital areas of the Nuclear Power Plant. The BDBEE mitigating strategies require certain room environments to be maintained such that they can support the occupancy of personnel and the functionality of equipment located therein, which is required to support the strategies associated with compliance to NRC Order EA-12-049. Three thermal-hydraulic analyses of vital areas during an extended loss of AC power using the GOTHIC computer code will be presented: 1) Safety-related pump and instrument room transient analysis; 2) Control Room transient analysis; and 3) Auxiliary/Control Building transient analysis. GOTHIC (Generation of Thermal-Hydraulic Information for Containment) is a general purpose thermal-hydraulics software package for the analysis of nuclear power plant containments, confinement buildings, and system components. It is a volume/path/heat sink

The EIS (Environmental Impact Statement) Process in Relation to the Proposed Naval Task Force at Everett, Washington,

Science.gov (United States)

1983-01-01

decision before filing the EA. Also, the transfer of fuel and arms and the change in economic and social enviromental effects warranted an EIS. Facts: The...must deal with many of the same environmental, social , and economic problems that are evident. The basing of a Naval Task Force in Puget Sound stems from...which involves unresolved conflicts e. V.V..4 President OMB Cirua * NEPA of 1969 (42 U.S.C. 4321) CEQ/EIS Guidelines 40 CFR 1500-1508 . 7 Excuiv Ordc

Energy, Externalities and Environmental Quality: Will Development Cure the Ills It Creates?

Energy Technology Data Exchange (ETDEWEB)

Pearson, P.J.G. [Imperial College of Science, Technology, and Medicine, London (United Kingdom)

1994-12-31

Environmental quality in the context of economic development was discussed. Factors that influence environmental quality were emphasized. Main empirical studies performed in this area, including studies that have produced the inverted U-shaped environmental ``Kuznet Curve``were reviewed. The `Kuznet curve` represents the hypothesized relationship between inequality of income distribution and economic development. This author attempted to incorporate environmental quality into this relationship, and to look for the policy implications of these estimates. Determinants of environmental quality such as the supply of environmental quality, waste receptors and energy resources, the demand for environmental quality, environmental quality outcomes, environmental and quality/development models were discussed, and an attempt was made to answer the question of whether or not these Kuznet curves really imply that development will automatically cure environmental ills. One of the main conclusions was that as income rises, the demand for environmental quality rises proportionately faster, while the supply of environmentally destructive activities decreases. Other conclusions called for the improvement of the data base on environmental quality, especially by developing countries. There was also a call for more studies to be done to understand the factors that affect environmental quality and policy in different developmental situations.

Energy, Externalities and Environmental Quality: Will Development Cure the Ills It Creates?

International Nuclear Information System (INIS)

Pearson, P.J.G.

1994-01-01

Environmental quality in the context of economic development was discussed. Factors that influence environmental quality were emphasized. Main empirical studies performed in this area, including studies that have produced the inverted U-shaped environmental ''Kuznet Curve''were reviewed. The 'Kuznet curve' represents the hypothesized relationship between inequality of income distribution and economic development. This author attempted to incorporate environmental quality into this relationship, and to look for the policy implications of these estimates. Determinants of environmental quality such as the supply of environmental quality, waste receptors and energy resources, the demand for environmental quality, environmental quality outcomes, environmental and quality/development models were discussed, and an attempt was made to answer the question of whether or not these Kuznet curves really imply that development will automatically cure environmental ills. One of the main conclusions was that as income rises, the demand for environmental quality rises proportionately faster, while the supply of environmentally destructive activities decreases. Other conclusions called for the improvement of the data base on environmental quality, especially by developing countries. There was also a call for more studies to be done to understand the factors that affect environmental quality and policy in different developmental situations

External Versus Two Different Internal Foci of Attention in Long-Distance Throwing.

Science.gov (United States)

Oki, Yuta; Kokubu, Masahiro; Nakagomi, Shiro

2018-02-01

The present study examined the influence of attentional focus on performance during a long-distance throwing task. Twelve participants executed three maximum-effort, long-distance baseball throwing attempts in three focus conditions: internal focus on wrist flexion (wrist internal focus), internal focus on the separation between pelvis and upper torso orientations (torso internal focus), and external focus on the ball path (external focus). Compared with the external focus and torso internal focus conditions, performance was poorer in the wrist internal focus condition. Performances were not different in the torso internal and external focus conditions. In addition, attentional focus affected the release angle of the ball but not its initial velocity. Our results reveal that the body part targeted for internal focus of attention and the forcefulness of the motor activity can be as important to motor performance as whether the attention is internal or external.

Theoretical Aspects of Analysis of International Environmental Security

Directory of Open Access Journals (Sweden)

Juliya A. Rusakova

2015-01-01

Full Text Available Abstract: International environmental security is a very hot contemporary issue of world politics, which in a large part defines the future of our environment. Dealing with this issue is of outmost importance since its failure will render all other issues and challenges as negligible. The article examines the theoretical aspects of solving the problem of environmental security. In particular, it analyzes the problem of negative social externalities, and the related concept of "tragedy of the commons." These problems create a fundamental obstacle to the implementation of environmental security at the global level. Traditionally, the problem of externalities in the environmental field have been approached economically, states and their manufacturers were to pay for the externalities in the form of additional taxes. However, experience shows that the economic tools of dealing with environmental security are not effective. The author suggests alternative non-economic approaches: strengthening and developing the system of permanent institutions of international negotiations on environmental security and promotion of environmental awareness. Solving the acute environmental problems is impossible without a change of the political philosophy of the ruling elites in most states.

Influence of radius of cylinder HTS bulk on guidance force in a maglev vehicle system

International Nuclear Information System (INIS)

Longcai, Zhang

2014-01-01

Highlights: • The guidance force was decayed by the application of the AC external magnetic field. • The guidance force was higher for the bulk with bigger radius. • The guidance force decay rates of the bulks were approximately equal despite of the different radius in the maglev vehicle system. - Abstract: Bulk superconductors had great potential for various engineering applications, especially in a high-temperature superconducting (HTS) maglev vehicle system. In such a system, the HTS bulks were always exposed to AC external magnetic field, which was generated by the inhomogeneous surface magnetic field of the NdFeB guideway. In our previous work, it was observed that the guidance force of the YBCO bulk over the NdFeB guideway used in the HTS maglev vehicle system was decayed by the application of the AC external magnetic field. In this paper, we investigated the influence of the radius of the cylinder HTS bulk exposed to an AC magnetic field perturbation on the guidance force in the maglev vehicle system. From the results, it was found that the guidance force was stronger for the bulk with bigger radius and the guidance force decay rates of the bulks were approximately equal despite of the different radius in the maglev vehicle system. Therefore, in order to obtain higher guidance force in the maglev vehicle system, we could use the cylinder HTS bulks with the bigger radius

Influence of radius of cylinder HTS bulk on guidance force in a maglev vehicle system

Energy Technology Data Exchange (ETDEWEB)

Longcai, Zhang, E-mail: zhlcai2000@163.com

2014-07-15

Highlights: • The guidance force was decayed by the application of the AC external magnetic field. • The guidance force was higher for the bulk with bigger radius. • The guidance force decay rates of the bulks were approximately equal despite of the different radius in the maglev vehicle system. - Abstract: Bulk superconductors had great potential for various engineering applications, especially in a high-temperature superconducting (HTS) maglev vehicle system. In such a system, the HTS bulks were always exposed to AC external magnetic field, which was generated by the inhomogeneous surface magnetic field of the NdFeB guideway. In our previous work, it was observed that the guidance force of the YBCO bulk over the NdFeB guideway used in the HTS maglev vehicle system was decayed by the application of the AC external magnetic field. In this paper, we investigated the influence of the radius of the cylinder HTS bulk exposed to an AC magnetic field perturbation on the guidance force in the maglev vehicle system. From the results, it was found that the guidance force was stronger for the bulk with bigger radius and the guidance force decay rates of the bulks were approximately equal despite of the different radius in the maglev vehicle system. Therefore, in order to obtain higher guidance force in the maglev vehicle system, we could use the cylinder HTS bulks with the bigger radius.

ExternE National Implementation Finland

Energy Technology Data Exchange (ETDEWEB)

Pingoud, K; Maelkki, H; Wihersaari, M; Pirilae, P [VTT Energy, Espoo (Finland); Hongisto, M [Imatran Voima Oy, Vantaa (Finland); Siitonen, S [Ekono Energy Ltd, Espoo (Finland); Johansson, M [Finnish Environment Institute, Helsinki (Finland)

1999-07-01

ExternE National Implementation is a continuation of the ExternE Project, funded in part by the European Commission's Joule III Programme. This study is the result of the ExternE National Implementation Project for Finland. Three fuel cycles were selected for the Finnish study: coal, peat and wood-derived biomass, which together are responsible for about 40% of total electricity generation in Finland and about 75% of the non-nuclear fuel based generation. The estimated external costs or damages were dominated by the global warming (GW) impacts in the coal and peat fuel cycles, but knowledge of the true GW impacts is still uncertain. From among other impacts that were valued in monetary terms the human health damages due to airborne emissions dominated in all the three fuel cycles. Monetary valuation for ecosystem impacts is not possible using the ExternE methodology at present. The Meri-Pori power station representing the coal fuel cycle is one of the world's cleanest and most efficient coal-fired power plants with a condensing turbine. The coal is imported mainly from Poland. The estimated health damages were about 4 mECU/kWh, crop damages an order of magnitude lower and damages caused to building materials two orders of magnitude lower. The power stations of the peat and biomass fuel cycles are of CHP type, generating electricity and heat for the district heating systems of two cities. Their fuels are of domestic origin. The estimated health damages allocated to electricity generation were about 5 and 6 mECU/kWh, respectively. The estimates were case-specific and thus an generalisation of the results to the whole electricity generation in Finland is unrealistic. Despite the uncertainties and limitations of the methodology, it is a promising tool in the comparison of similar kinds of fuel cycles, new power plants and pollution abatement technologies and different plant locations with each other. (orig.)

ExternE National Implementation Finland

Energy Technology Data Exchange (ETDEWEB)

Pingoud, K.; Maelkki, H.; Wihersaari, M.; Pirilae, P. [VTT Energy, Espoo (Finland); Hongisto, M. [Imatran Voima Oy, Vantaa (Finland); Siitonen, S. [Ekono Energy Ltd, Espoo (Finland); Johansson, M. [Finnish Environment Institute, Helsinki (Finland)

1999-07-01

ExternE National Implementation is a continuation of the ExternE Project, funded in part by the European Commission's Joule III Programme. This study is the result of the ExternE National Implementation Project for Finland. Three fuel cycles were selected for the Finnish study: coal, peat and wood-derived biomass, which together are responsible for about 40% of total electricity generation in Finland and about 75% of the non-nuclear fuel based generation. The estimated external costs or damages were dominated by the global warming (GW) impacts in the coal and peat fuel cycles, but knowledge of the true GW impacts is still uncertain. From among other impacts that were valued in monetary terms the human health damages due to airborne emissions dominated in all the three fuel cycles. Monetary valuation for ecosystem impacts is not possible using the ExternE methodology at present. The Meri-Pori power station representing the coal fuel cycle is one of the world's cleanest and most efficient coal-fired power plants with a condensing turbine. The coal is imported mainly from Poland. The estimated health damages were about 4 mECU/kWh, crop damages an order of magnitude lower and damages caused to building materials two orders of magnitude lower. The power stations of the peat and biomass fuel cycles are of CHP type, generating electricity and heat for the district heating systems of two cities. Their fuels are of domestic origin. The estimated health damages allocated to electricity generation were about 5 and 6 mECU/kWh, respectively. The estimates were case-specific and thus an generalisation of the results to the whole electricity generation in Finland is unrealistic. Despite the uncertainties and limitations of the methodology, it is a promising tool in the comparison of similar kinds of fuel cycles, new power plants and pollution abatement technologies and different plant locations with each other. (orig.)

ExternE National Implementation Finland

International Nuclear Information System (INIS)

Pingoud, K.; Maelkki, H.; Wihersaari, M.; Pirilae, P.; Hongisto, M.; Siitonen, S.; Johansson, M.

1999-01-01

ExternE National Implementation is a continuation of the ExternE Project, funded in part by the European Commission's Joule III Programme. This study is the result of the ExternE National Implementation Project for Finland. Three fuel cycles were selected for the Finnish study: coal, peat and wood-derived biomass, which together are responsible for about 40% of total electricity generation in Finland and about 75% of the non-nuclear fuel based generation. The estimated external costs or damages were dominated by the global warming (GW) impacts in the coal and peat fuel cycles, but knowledge of the true GW impacts is still uncertain. From among other impacts that were valued in monetary terms the human health damages due to airborne emissions dominated in all the three fuel cycles. Monetary valuation for ecosystem impacts is not possible using the ExternE methodology at present. The Meri-Pori power station representing the coal fuel cycle is one of the world's cleanest and most efficient coal-fired power plants with a condensing turbine. The coal is imported mainly from Poland. The estimated health damages were about 4 mECU/kWh, crop damages an order of magnitude lower and damages caused to building materials two orders of magnitude lower. The power stations of the peat and biomass fuel cycles are of CHP type, generating electricity and heat for the district heating systems of two cities. Their fuels are of domestic origin. The estimated health damages allocated to electricity generation were about 5 and 6 mECU/kWh, respectively. The estimates were case-specific and thus an generalisation of the results to the whole electricity generation in Finland is unrealistic. Despite the uncertainties and limitations of the methodology, it is a promising tool in the comparison of similar kinds of fuel cycles, new power plants and pollution abatement technologies and different plant locations with each other. (orig.)

Acoustic interaction forces between small particles in an ideal fluid

DEFF Research Database (Denmark)

Silva, Glauber T.; Bruus, Henrik

2014-01-01

We present a theoretical expression for the acoustic interaction force between small spherical particles suspended in an ideal fluid exposed to an external acoustic wave. The acoustic interaction force is the part of the acoustic radiation force on one given particle involving the scattered waves...... from the other particles. The particles, either compressible liquid droplets or elastic microspheres, are considered to be much smaller than the acoustic wavelength. In this so-called Rayleigh limit, the acoustic interaction forces between the particles are well approximated by gradients of pair...

Internalization of external costs for nuclear power in Romania

International Nuclear Information System (INIS)

Andrei, Veronica; Ghita, Sorin; Ionita, Gheorghe; Gheorghe-Sorescu, Antonius; Glodeanu, Florin

2006-01-01

A technology that competes against alternatives on a full cost basis is not sustainable - no matter how environmentally friendly is. Competitive performance, however, means more than lower costs. Additional factors as the following have to be considered as criteria ensuring a sustainable energy development: - environmentally compatibility - intergenerational compatibility - power demand compatibility - socio-political compatibility - geopolitical compatibility. Some factors are less difficult to express in al.) Recent Cold Fterms (e.g. the economic value of degraded public health) than others (e.g. the economic value of reliable supplies or lack of public acceptance) but their quantifications are fraught with uncertainty, vary greatly from location to location and cannot be generalized. Still, these factors often tilt the balance in favor or disfavor of a particular technology. From a public perspective, a set of costs called 'external costs' are important. By definition these costs are external to standard private sector cost accounting schemes. They are necessarily paid for, not as a cost of doing business, but by society. The concept of externalities has been referred to in the economic literature since early in the 20th century. In 1974, the Council of OECD recommended the application by governments of the 'Polluter Pays Principle', defined in the early 1970s as a means to allocate costs of pollution prevention and control measures to pollutants, and thereby to consumers of their products, rather than to society as a whole. The externality may be defined as 'a cost or benefit that is not included in the market price of a commodity because it is not included in the supply price or demand price. An externality is produced when the economic activity of one actor (or group of actors) has a positive or negative impact on the welfare function of another actor (or group of actors) and when the former fails to be fully compensated, or to fully compensate the latter

Public comments and Task Force responses regarding the environmental survey of the reprocessing and waste management portions of the LWR fuel cycle

International Nuclear Information System (INIS)

1977-03-01

This document contains responses by the NRC Task Force to comments received on the report ''Environmental Survey of the Reprocessing and Waste Management Portions of the LWR Fuel Cycle'' (NUREG-0116). These responses are directed at all comments, inclding those received after the close of the comment period. Additional information on the environmental impacts of reprocessing and waste management which has either become available since the publication of NUREG-0116 or which adds requested clarification to the information in that document

The Role of External Environment in Upper Echelons Theory

DEFF Research Database (Denmark)

Yamak, Sibel; Nielsen, Sabina; Escribá-Esteve, Alejandro

2014-01-01

and industrial organization theories, a cross-level conceptual model outlining the direct, mediating, and moderating effects of the external environment on upper echelons is developed. This review distinguishes between industry and institutional levels of analysis and three types of environmental characteristics......Upper echelons research has largely focused on the antecedents and consequences of top management teams (TMTs) from the team and firm levels of analysis. This paper reviews empirical research on TMTs with a specific emphasis on the role of the external environment. Applying institutional...

Regional Externalities

NARCIS (Netherlands)

Heijman, W.J.M.

2007-01-01

The book offers practical and theoretical insights in regional externalities. Regional externalities are a specific subset of externalities that can be defined as externalities where space plays a dominant role. This class of externalities can be divided into three categories: (1) externalities

Empirical model of TEC response to geomagnetic and solar forcing over Balkan Peninsula

Science.gov (United States)

Mukhtarov, P.; Andonov, B.; Pancheva, D.

2018-01-01

An empirical total electron content (TEC) model response to external forcing over Balkan Peninsula (35°N-50°N; 15°E-30°E) is built by using the Center for Orbit Determination of Europe (CODE) TEC data for full 17 years, January 1999 - December 2015. The external forcing includes geomagnetic activity described by the Kp-index and solar activity described by the solar radio flux F10.7. The model describes the most probable spatial distribution and temporal variability of the externally forced TEC anomalies assuming that they depend mainly on latitude, Kp-index, F10.7 and LT. The anomalies are expressed by the relative deviation of the TEC from its 15-day mean, rTEC, as the mean value is calculated from the 15 preceding days. The approach for building this regional model is similar to that of the global TEC model reported by Mukhtarov et al. (2013a) however it includes two important improvements related to short-term variability of the solar activity and amended geomagnetic forcing by using a "modified" Kp index. The quality assessment of the new constructing model procedure in terms of modeling error calculated for the period of 1999-2015 indicates significant improvement in accordance with the global TEC model (Mukhtarov et al., 2013a). The short-term prediction capabilities of the model based on the error calculations for 2016 are improved as well. In order to demonstrate how the model is able to reproduce the rTEC response to external forcing three geomagnetic storms, accompanied also with short-term solar activity variations, which occur at different seasons and solar activity conditions are presented.

Choosing in freedom or forced to choose? Introspective blindness to psychological forcing in stage-magic.

Directory of Open Access Journals (Sweden)

Diego E Shalom

Full Text Available We investigated an individual ability to identify whether choices were made freely or forced by external parameters. We capitalized on magical setups where the notion of psychological forcing constitutes a well trodden path. In live stage magic, a magician guessed cards from spectators while inquiring how freely they thought they had made the choice. Our data showed a marked blindness in the introspection of free choice. Spectators assigned comparable ratings when choosing the card that the magician deliberately forced them compared to any other card, even in classical forcing, where the magician literally handles a card to the participant This observation was paralleled by a laboratory experiment where we observed modest changes in subjective reports by factors with drastic effect in choice. Pupil dilatation, which is known to tag slow cognitive events related to memory and attention, constitutes an efficient fingerprint to index subjective and objective aspects of choice.

Optical forces, torques, and force densities calculated at a microscopic level using a self-consistent hydrodynamics method

Science.gov (United States)

Ding, Kun; Chan, C. T.

2018-04-01

The calculation of optical force density distribution inside a material is challenging at the nanoscale, where quantum and nonlocal effects emerge and macroscopic parameters such as permittivity become ill-defined. We demonstrate that the microscopic optical force density of nanoplasmonic systems can be defined and calculated using the microscopic fields generated using a self-consistent hydrodynamics model that includes quantum, nonlocal, and retardation effects. We demonstrate this technique by calculating the microscopic optical force density distributions and the optical binding force induced by external light on nanoplasmonic dimers. This approach works even in the limit when the nanoparticles are close enough to each other so that electron tunneling occurs, a regime in which classical electromagnetic approach fails completely. We discover that an uneven distribution of optical force density can lead to a light-induced spinning torque acting on individual particles. The hydrodynamics method offers us an accurate and efficient approach to study optomechanical behavior for plasmonic systems at the nanoscale.

Geodatabase of environmental information for Air Force Plant 4 and Naval Air Station-Joint Reserve Base Carswell Field, Fort Worth, Texas, 1990-2004

Science.gov (United States)

Shah, Sachin D.; Quigley, Sean M.

2005-01-01

Air Force Plant 4 (AFP4) and adjacent Naval Air Station-Joint Reserve Base (NAS-JRB) at Fort Worth, Tex., constitute a government-owned, contractor-operated (GOCO) facility that has been in operation since 1942. Contaminants from the facility, primarily volatile organic compounds (VOCs) and metals, have entered the groundwater-flow system through leakage from waste-disposal sites (landfills and pits) and from manufacturing processes (U.S. Air Force, Aeronautical Systems Center, 1995). The U.S. Geological Survey (USGS), in cooperation with the U.S. Air Force (USAF), Aeronautical Systems Center, Environmental Management Directorate (ASC/ENVR), developed a comprehensive database (or geodatabase) of temporal and spatial environmental information associated with the geology, hydrology, and water quality at AFP4 and NAS-JRB. The database of this report provides information about the AFP4 and NAS-JRB study area including sample location names, identification numbers, locations, historical dates, and various measured hydrologic data. This database does not include every sample location at the site, but is limited to an aggregation of selected digital and hardcopy data of the USAF, USGS, and various consultants who have previously or are currently working at the site.

Comparison of environmental impacts of electricity from different sources

International Nuclear Information System (INIS)

Eyre, N.

1993-01-01

For fossil fuel electricity generation the major environmental externalities result from acid deposition, tropospheric ozone and global warming. For nuclear power the main issues are major reactor accidents and long-term waste disposal. Some broad estimates of environmental externalities (in p/kWh) are given from each, based on available scientific evidence and valuation studies. The uncertainties and methodological problems associated with valuation prevent any reliable statement about the relative magnitudes of externalities resulting from fossil and nuclear generating options. In both cases, some of the impacts are incompatible with stricter interpretations of sustainability. The important environmental impacts of most renewable electricity generating options concern human amenity. (author)

Investigation of index finger triggering force using a cadaver experiment: Effects of trigger grip span, contact location, and internal tendon force.

Science.gov (United States)

Chang, Joonho; Freivalds, Andris; Sharkey, Neil A; Kong, Yong-Ku; Mike Kim, H; Sung, Kiseok; Kim, Dae-Min; Jung, Kihyo

2017-11-01

A cadaver study was conducted to investigate the effects of triggering conditions (trigger grip span, contact location, and internal tendon force) on index finger triggering force and the force efficiency of involved tendons. Eight right human cadaveric hands were employed, and a motion simulator was built to secure and control the specimens. Index finger triggering forces were investigated as a function of different internal tendon forces (flexor digitorum profundus + flexor digitorum superficialis = 40, 70, and 100 N), trigger grip spans (40, 50, and 60 mm), and contact locations between the index finger and a trigger. Triggering forces significantly increased when internal tendon forces increased from 40 to 100 N. Also, trigger grip spans and contact locations had significant effects on triggering forces; maximum triggering forces were found at a 50 mm span and the most proximal contact location. The results revealed that only 10-30% of internal tendon forces were converted to their external triggering forces. Copyright © 2017 Elsevier Ltd. All rights reserved.

Disability correlates in Canadian Armed Forces Regular Force Veterans.

Science.gov (United States)

Thompson, James M; Pranger, Tina; Sweet, Jill; VanTil, Linda; McColl, Mary Ann; Besemann, Markus; Shubaly, Colleen; Pedlar, David

2015-01-01

This study was undertaken to inform disability mitigation for military veterans by identifying personal, environmental, and health factors associated with activity limitations. A sample of 3154 Canadian Armed Forces Regular Force Veterans who were released during 1998-2007 participated in the 2010 Survey on Transition to Civilian Life. Associations between personal and environmental factors, health conditions and activity limitations were explored using ordinal logistic regression. The prevalence of activity reduction in life domains was higher than the Canadian general population (49% versus 21%), as was needing assistance with at least one activity of daily living (17% versus 5%). Prior to adjusting for health conditions, disability odds were elevated for increased age, females, non-degree post-secondary graduation, low income, junior non-commissioned members, deployment, low social support, low mastery, high life stress, and weak sense of community belonging. Reduced odds were found for private/recruit ranks. Disability odds were highest for chronic pain (10.9), any mental health condition (2.7), and musculoskeletal conditions (2.6), and there was a synergistic additive effect of physical and mental health co-occurrence. Disability, measured as activity limitation, was associated with a range of personal and environmental factors and health conditions, indicating multifactorial and multidisciplinary approaches to disability mitigation.

Theory and computation of general force balance in non-axisymmetric tokamak equilibria

Science.gov (United States)

Park, Jong-Kyu; Logan, Nikolas; Wang, Zhirui; Kim, Kimin; Boozer, Allen; Liu, Yueqiang; Menard, Jonathan

2014-10-01

Non-axisymmetric equilibria in tokamaks can be effectively described by linearized force balance. In addition to the conventional isotropic pressure force, there are three important components that can strongly contribute to the force balance; rotational, anisotropic tensor pressure, and externally given forces, i.e. ∇ --> p + ρv-> . ∇ --> v-> + ∇ --> . Π + f-> = j-> × B-> , especially in, but not limited to, high β and rotating plasmas. Within the assumption of nested flux surfaces, Maxwell equations and energy minimization lead to the modified-generalized Newcomb equation for radial displacements with simple algebraic relations for perpendicular and parallel displacements, including an inhomogeneous term if any of the forces are not explicitly dependent on displacements. The general perturbed equilibrium code (GPEC) solves this force balance consistent with energy and torque given by external perturbations. Local and global behaviors of solutions will be discussed when ∇ --> . Π is solved by the semi-analytic code PENT and will be compared with MARS-K. Any first-principle transport code calculating ∇ --> . Π or f-> , e.g. POCA, can also be incorporated without demanding iterations. This work was supported by DOE Contract DE-AC02-09CH11466.

Internal and external variability in regional simulations of the Iberian Peninsula climate over the last millennium

Directory of Open Access Journals (Sweden)

J. J. Gómez-Navarro

2012-01-01

Full Text Available In this study we analyse the role of internal variability in regional climate simulations through a comparison of two regional paleoclimate simulations for the last millennium. They share the same external forcings and model configuration, differing only in the initial condition used to run the driving global model simulation. A comparison of these simulations allows us to study the role of internal variability in climate models at regional scales, and how it affects the long-term evolution of climate variables such as temperature and precipitation. The results indicate that, although temperature is homogeneously sensitive to the effect of external forcings, the evolution of precipitation is more strongly governed by random unpredictable internal dynamics. There are, however, some areas where the role of internal variability is lower than expected, allowing precipitation to respond to the external forcings. In this respect, we explore the underlying physical mechanisms responsible for it. This study identifies areas, depending on the season, in which a direct comparison between model simulations of precipitation and climate reconstructions would be meaningful, but also other areas where good agreement between them should not be expected even if both are perfect.

External Debt and Public Investment in Education in Sub-Saharan Africa.

Science.gov (United States)

Tilak, Jandhyala B. G.

1990-01-01

Worsening economic conditions, reflected in mounting external debt, debt service, and structural adjustment processes have forced governments to reveal their expenditure priorities, which are largely against human capital investment activities like education. This paper examines this phenomenon, using cross-country data for Sub-Saharan Africa.…

Force Exertion and Transmission in Cross-Linked Actin Networks

Science.gov (United States)

Stam, Samantha

Cells are responsive to external cues in their environment telling them to proliferate or migrate within their surrounding tissue. Sensing of cues that are mechanical in nature, such stiffness of a tissue or forces transmitted from other cells, is believed to involve the cytoskeleton of a cell. The cytoskeleton is a complex network of proteins consisting of polymers that provide structural support, motor proteins that remodel these structures, and many others. We do not yet have a complete understanding of how cytoskeletal components respond to either internal or external mechanical force and stiffness. Such an understanding should involve mechanisms by which constituent molecules, such as motor proteins, are responsive to mechanics. Additionally, physical models of how forces are transmitted through biopolymer networks are necessary. My research has focused on networks formed by the cytoskeletal filament actin and the molecular motor protein myosin II. Actin filaments form networks and bundles that form a structural framework of the cell, and myosin II slides actin filaments. In this thesis, we show that stiffness of an elastic load that opposes myosin-generated actin sliding has a very sharp effect on the myosin force output in simulations. Secondly, we show that the stiffness and connectivity of cytoskeletal filaments regulates the contractility and anisotropy of network deformations that transmit force on material length scales. Together, these results have implications for predicting and interpreting the deformations and forces in biopolymeric active materials.

Environmental Equity and the Role of Public Policy: Experiences in the Rijnmond Region

Science.gov (United States)

Kruize, Hanneke; Driessen, Peter P. J.; Glasbergen, Pieter; van Egmond, Klaas (N. D.)

2007-10-01

This Φ Ψ study of environmental equity uses secondary quantitative data to analyze socioeconomic disparities in environmental conditions in the Rijnmond region of the Netherlands. The disparities of selected environmental indicators—exposure to traffic noise (road, rail, and air), NO2, external safety risks, and the availability of public green space—are analyzed both separately and in combination. Not only exposures to environmental burdens (“bads”) were investigated, but also access to environmental benefits (“goods”). Additionally, we held interviews and reviewed documents to grasp the mechanisms underlying the environmental equity situation, with an emphasis on the role of public policy. Environmental equity is not a priority in public policy for the greater Rotterdam region known as the Rijnmond region, yet environmental standards have been established to provide a minimum environmental quality to all local residents. In general, environmental quality has improved in this region, and the accumulation of negative environmental outcomes (“bads”) has been limited. However, environmental standards for road traffic noise and NO2 are being exceeded, probably because of the pressure on space and the traffic intensity. We found an association of environmental “bads” with income for rail traffic noise and availability of public green space. In the absence of regulation, positive environmental outcomes (“goods”) are mainly left up to market forces. Consequently, higher-income groups generally have more access to environmental “goods” than lower-income groups.

Internalization of external cost for the production and distribution of electricity in Flanders, Belgium

International Nuclear Information System (INIS)

Torfs, R.; De Nocker, L.; Schrooten, L.; Aernouts, K.; Liekens, I.

2005-04-01

This report elaborates the external costs of electricity production and distribution in Flanders, Belgium, and tests them against prices and taxes for electricity use. The authors examined whether these external costs decrease in time and whether such a decrease leads to internalization in the price for the users through taxes, levies or other economic instruments. The external costs mainly include external environmental costs caused by air pollution and greenhouse gases, but also damage caused by accidents, hindrance and radioactive substances that may be released. [nl

Environmental surveillance at Los Alamos during 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

This report describes environmental monitoring activities at Los Alamos National Laboratory for 1994. Data were collected to assess external penetrating radiation, airborne emissions, liquid effluents, radioactivity of environmental materials and food stuffs, and environmental compliance.

Environmental surveillance at Los Alamos during 1994

International Nuclear Information System (INIS)

1996-07-01

This report describes environmental monitoring activities at Los Alamos National Laboratory for 1994. Data were collected to assess external penetrating radiation, airborne emissions, liquid effluents, radioactivity of environmental materials and food stuffs, and environmental compliance

Public comments and Task Force responses regarding the environmental survey of the reprocessing and waste management portions of the LWR fuel cycle

Energy Technology Data Exchange (ETDEWEB)

1977-03-01

This document contains responses by the NRC Task Force to comments received on the report ''Environmental Survey of the Reprocessing and Waste Management Portions of the LWR Fuel Cycle'' (NUREG-0116). These responses are directed at all comments, inclding those received after the close of the comment period. Additional information on the environmental impacts of reprocessing and waste management which has either become available since the publication of NUREG-0116 or which adds requested clarification to the information in that document.

STUDY OF STATIC AND DYNAMIC STABILITY OF THIN-WALLED BARS EXCITED BY PERIODICAL AXIAL EXTERNAL FORCES.

Directory of Open Access Journals (Sweden)

Minodora Maria PASĂRE

2010-10-01

Full Text Available In these paper, starting from the relations for the displacements and spinning the transversal section of a bar with thin walls of sections opened expressed by the corresponding influence functions and introducing the components of the exterior forces distributed and the moments of the exterior forces distributed due to the inertia forces, the exciting axial forces together with the following effect of these and of the reaction forces of the elastic environment for leaning it may reach to the system of the equations of parametric vibrations under the form of three integral equation These equations may serve for the study of vibrations of the bars, to study the static stability and to study the dynamic stability

Final Environmental Assessment for Implementation of Proposed Actions in the Moody Air Force Base Integrated Natural Resources Management Plan (INRMP)

Science.gov (United States)

2015-09-01

systems, wind turbines , green roofs, and habitat-oriented storm water management) would be incorporated where practicable. A-12 THIS PAGE INTENTIONALLY...requirements. There are numerous projects that would have a beneficial impact on Bird /Wildlife Aircraft Strike Hazard including prescribed burning...Force Instruction BASH Bird /Wildlife Aircraft Strike Hazard BMP best management practice CEQ Council on Environmental Quality CFR Code of

Molecular force sensors to measure stress in cells

International Nuclear Information System (INIS)

Prabhune, Meenakshi; Rehfeldt, Florian; Schmidt, Christoph F

2017-01-01

Molecularly generated forces are essential for most activities of biological cells, but also for the maintenance of steady state or homeostasis. To quantitatively understand cellular dynamics in migration, division, or mechanically guided differentiation, it will be important to exactly measure stress fields within the cell and the extracellular matrix. Traction force microscopy and related techniques have been established to determine the stress transmitted from adherent cells to their substrates. However, different approaches are needed to directly assess the stress generated inside the cell. This has recently led to the development of novel molecular force sensors. In this topical review, we briefly mention methods used to measure cell-external forces, and then summarize and explain different designs for the measurement of cell-internal forces with their respective advantages and disadvantages. (topical review)

Analisis Lingkungan Industri Kakkk, Ayam Geprek Surabaya Menggunakan Porter's Five Forces Model

OpenAIRE

Jeffrey, Charles Raymond

2016-01-01

Penelitian ini bertujuan untuk menganalisis lingkungan industri Kakkk, Ayam Geprek, yaitu industri restoran berdasarkan Porter's Five Forces Model. Tinggi rendahnya masing-masing kekuatan Porter's Five Forces Model dinilai berdasarkan Porter's Five Forces Scorecard. Kemudian, hasil dari Porter's Five Scorecard akan dijadikan patokan bobot dalam External Factor Evaluation (EFE) Matrix untuk mengevaluasi kemampuan Kakkk, Ayam Geprek dalam menghadapi peluang dan ancaman di dalam industri. Jenis ...

Information driving force and its application in agent-based modeling

Science.gov (United States)

Chen, Ting-Ting; Zheng, Bo; Li, Yan; Jiang, Xiong-Fei

2018-04-01

Exploring the scientific impact of online big-data has attracted much attention of researchers from different fields in recent years. Complex financial systems are typical open systems profoundly influenced by the external information. Based on the large-scale data in the public media and stock markets, we first define an information driving force, and analyze how it affects the complex financial system. The information driving force is observed to be asymmetric in the bull and bear market states. As an application, we then propose an agent-based model driven by the information driving force. Especially, all the key parameters are determined from the empirical analysis rather than from statistical fitting of the simulation results. With our model, both the stationary properties and non-stationary dynamic behaviors are simulated. Considering the mean-field effect of the external information, we also propose a few-body model to simulate the financial market in the laboratory.

The effect of normative social forces on managed care organizations: implications for strategic management.

Science.gov (United States)

Kirby, E G; Sebastian, J G

1998-01-01

Drawing on institutional theory, this study examines how adherence to a number of "institutional" and "technical" environmental forces can influence the business success of managed care organizations (MCOs). The standards studied include: (1) institutional forces: socially accepted procedures for delivering care (access to quality care, availability of information, and delivery of care in a personal manner); and (2) technical forces: industry standards for cost control and efficient use of financial and medical resources. The most significant finding is that successful MCOs must conform to both institutional and technical forces to be successful. MCOs that conform to either one or the other type of standard were no more successful than those that conformed to neither. These findings have several important implications for MCO strategy. First, to be successful, MCO executives must understand the external environment in which they operate. They must anticipate and respond to shifts in that environment. Second, this understanding of the external environment must place equal emphasis on societal demands (e.g., for accessible care and information) and on technical demands (e.g., for cost-efficient care). These findings may well reflect that once managed care penetration reaches relatively high levels, marketshare can no longer be gained through cost-efficiency alone; rather, enrollee satisfaction based on societal demands becomes a key factor in maintaining and gaining marketshare. Institutional theory provides' some strategies for accomplishing these goals. Cost-containment strategies include implementing policies for cutting costs in areas that do not affect the quality of care, such as using generic drugs and reducing administrative excesses and redundancies. At the same time, MCOs must implement strategies aimed at improving conformity to prevailing societal perceptions of appropriate care, including providing patients more freedom to choose their physicians and

The Internal and External Constraints on Foreign Policy in India

DEFF Research Database (Denmark)

Schmidt, Johannes Dragsbæk

2017-01-01

The main argument of this contribution is that the distinction between internal and external is at best blurred and in reality does not make much sense in the case of India’s foreign policy. It may start and end at the border and be determined by negotiations, diplomacy or brute force but there i...

External Influences on an Internal Process: Supporting Preservice Teacher Research

Science.gov (United States)

Schulte, Ann; Klipfel, Lyndsay Halpin

2016-01-01

In an effort to better understand how participating in teacher research as a student teacher compares to conducting it as a practicing teacher, a teacher educator and her former teacher education student engaged in a collaborative dialogue. They focus their reflections in this article on the impact of external forces on the process of teacher…

Welding deformation analysis based on improved equivalent strain method to cover external constraint during cooling stage

Directory of Open Access Journals (Sweden)

Tae-Jun Kim

2015-09-01

Full Text Available In the present study, external restraints imposed normal to the plate during the cooling stage were determined to be effective for reduction of the angular distortion of butt-welded or fillet-welded plate. A welding analysis model under external force during the cooling stage was idealized as a prismatic member subjected to pure bending. The external restraint was represented by vertical force on both sides of the work piece and bending stress forms in the transverse direction. The additional bending stress distribution across the plate thickness was reflected in the improved inherent strain model, and a set of inherent strain charts with different levels of bending stress were newly calculated. From an elastic linear FE analysis using the inherent strain values taken from the chart and comparing them with those from a 3D thermal elasto-plastic FE analysis, welding deformation can be calculated.

External costs related to power production technologies. ExternE national implementation for Denmark

Energy Technology Data Exchange (ETDEWEB)

Schleisner, L; Sieverts Nielsen, P [eds.

1997-12-01

The objective of the ExternE National Implementation project has been to establish a comprehensive and comparable set of data on externalities of power generation for all EU member states and Norway. The tasks include the application of the ExternE methodology to the most important fuel cycles for each country as well as to update the already existing results, to aggregate these site- and technology-specific results to more general figures. The current report covers the detailed information concerning the ExternE methodology. Importance is attached to the computer system used in the project and the assessment of air pollution effects on health, materials and ecological effects. Also the assessment of global warming damages are described. Finally the report covers the detailed information concerning the national implementation for Denmark for an offshore wind farm and a wind farm on land, a decentralised CHP plant based on natural gas and a decentralised CHP plant base on biogas. (au) EU-JOULE 3. 79 tabs., 11 ills., 201 refs.

External costs related to power production technologies. ExternE national implementation for Denmark

International Nuclear Information System (INIS)

Schleisner, L.; Sieverts Nielsen, P.

1997-12-01

The objective of the ExternE National Implementation project has been to establish a comprehensive and comparable set of data on externalities of power generation for all EU member states and Norway. The tasks include the application of the ExternE methodology to the most important fuel cycles for each country as well as to update the already existing results, to aggregate these site- and technology-specific results to more general figures. The current report covers the detailed information concerning the ExternE methodology. Importance is attached to the computer system used in the project and the assessment of air pollution effects on health, materials and ecological effects. Also the assessment of global warming damages are described. Finally the report covers the detailed information concerning the national implementation for Denmark for an offshore wind farm and a wind farm on land, a decentralised CHP plant based on natural gas and a decentralised CHP plant base on biogas. (au) EU-JOULE 3. 79 tabs., 11 ills., 201 refs

Hydrodynamic interactions induce movement against an external load in a ratchet dimer Brownian motor.

Science.gov (United States)

Fornés, José A

2010-01-15

We use the Brownian dynamics with hydrodynamic interactions simulation in order to describe the movement of a elastically coupled dimer Brownian motor in a ratchet potential. The only external forces considered in our system were the load, the random thermal noise and an unbiased thermal fluctuation. For a given set of parameters we observe direct movement against the load force if hydrodynamic interactions were considered.

76 FR 67439 - External Peer Review Meeting for Draft Microbial Risk Assessment Guideline: Pathogenic...

Science.gov (United States)

2011-11-01

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-ORD-2011-053; FRL-9485-1] External Peer Review Meeting for... review draft does not represent EPA policy. The public may register to attend this peer review meeting as... to consider the comments from the external peer review meeting, along with public comments received...

Data requirements for valuing externalities: The role of existing permitting processes

Energy Technology Data Exchange (ETDEWEB)

Lee, A.D.; Baechler, M.C.; Callaway, J.M.

1990-08-01

While the assessment of externalities, or residual impacts, will place new demands on regulators, utilities, and developers, existing processes already require certain data and information that may fulfill some of the data needs for externality valuation. This paper examines existing siting, permitting, and other processes and highlights similarities and differences between their data requirements and the data required to value environmental externalities. It specifically considers existing requirements for siting new electricity resources in Oregon and compares them with the information and data needed to value externalities for such resources. This paper also presents several observations about how states can take advantage of data acquired through processes already in place as they move into an era when externalities are considered in utility decision-making. It presents other observations on the similarities and differences between the data requirements under existing processes and those for valuing externalities. This paper also briefly discusses the special case of cumulative impacts. And it presents recommendations on what steps to take in future efforts to value externalities. 35 refs., 2 tabs.

Note: Fabrication of a fast-response and user-friendly environmental chamber for atomic force microscopes

Energy Technology Data Exchange (ETDEWEB)

Ji, Yanfeng; Hui, Fei; Shi, Yuanyuan; Han, Tingting; Song, Xiaoxue; Pan, Chengbin; Lanza, Mario, E-mail: mlanza@suda.edu.cn [Institute of Functional Nano & Soft Materials, Soochow University, Collaborative Innovation Center of Suzhou Nano Science & Technology, 199 Ren-Ai Road, Suzhou 215123 (China)

2015-10-15

The atomic force microscope is one of the most widespread tools in science, but many suppliers do not provide a competitive solution to make experiments in controlled atmospheres. Here, we provide a solution to this problem by fabricating a fast-response and user-friendly environmental chamber. We corroborate the correct functioning of the chamber by studying the formation of local anodic oxidation on a silicon sample (biased under opposite polarities), an effect that can be suppressed by measuring in a dry nitrogen atmosphere. The usefulness of this chamber goes beyond the example here presented, and it could be used in many other fields of science, including physics, mechanics, microelectronics, nanotechnology, medicine, and biology.

Black Carbon Radiative Forcing over the Tibetan Plateau

Energy Technology Data Exchange (ETDEWEB)

He, Cenlin; Li, Qinbin; Liou, K. N.; Takano, Y.; Gu, Yu; Qi, L.; Mao, Yuhao; Leung, Lai-Yung R.

2014-11-28

We estimate the snow albedo forcing and direct radiative forcing (DRF) of black carbon (BC) in the Tibetan Plateau using a global chemical transport model in conjunction with a stochastic snow model and a radiative transfer model. Our best estimate of the annual BC snow albedo forcing in the Plateau is 2.9 W m-2 (uncertainty: 1.5–5.0 W m-226 ). We find that BC-snow internal mixing increases the albedo forcing by 40-60% compared with external mixing and coated BC increases the forcing by 30-50% compared with uncoated BC, whereas Koch snowflakes reduce the forcing by 20-40% relative to spherical snow grains. Our best estimate of the annual BC DRF at the top of the atmosphere is 2.3 W m-2 (uncertainty: 0.7–4.3 W m-230 ) in the Plateau after scaling the modeled BC absorption optical depth to Aerosol Robotic Network (AERONET) observations. The BC forcings are attributed to emissions from different regions.

Measuring Agglomeration Forces in a Financial Center

OpenAIRE

Bourgain, Arnaud; Pieretti, Patrice

2006-01-01

Basing on Scitovsky's (1954) definition of external economies and applying the method of Caballero and Lyons (1990) to macro data of Luxembourg services industry, we find significant agglomeration forces between financial intermediaries (downstream industry) on the one hand and business services and computer industry (upstream industries) on the other.

The calculation of external gamma-ray doses from airborne and deposited radionuclides in the environmental code NECTAR

International Nuclear Information System (INIS)

Corbett, J.O.

1982-02-01

A computer program has been developed for the rapid evaluation of external gamma-ray doses from airborne and deposited radionuclide mixtures. Based on a gaussian dispersion model, the program calculates the dose at any position, including points high above ground level or upwind of the source. Meteorological frequency data for wind speed, direction, atmospheric stability and rainfall are fully taken into account. The calculational model assumes that the ground surface is perfectly flat and that gamma-ray paths are entirely in air; the possible errors caused by these and other assumptions are discussed, with suggested correction factors. The program applies various criteria to determine the best approximation or numerical integration method for each target point; execution times (on an IBM 370 machine) thus vary from less than 0.01s to about 0.3s per target point for a single weather category. The program has been incorporated in the environmental release program NECTAR. (author)

Pricing landfill externalities: Emissions and disamenity costs in Cape Town, South Africa

International Nuclear Information System (INIS)

Nahman, Anton

2011-01-01

Highlights: → The paper estimates landfill externalities associated with emissions, disamenities and transport. → Transport externalities vary from 24.22 to 31.42 Rands per tonne. → Costs of emissions (estimated using benefits transfer) vary from 0.07 to 28.91 Rands per tonne. → Disamenities (estimated using hedonic pricing) vary from 0.00 to 57.46 Rands per tonne. → Overall, external costs for urban landfills exceed those of a regional landfill. - Abstract: The external (environmental and social) costs of landfilling (e.g. emissions to air, soil and water; and 'disamenities' such as odours and pests) are difficult to quantify in monetary terms, and are therefore not generally reflected in waste disposal charges or taken into account in decision making regarding waste management options. This results in a bias against alternatives such as recycling, which may be more expensive than landfilling from a purely financial perspective, but preferable from an environmental and social perspective. There is therefore a need to quantify external costs in monetary terms, so that different disposal options can be compared on the basis of their overall costs to society (financial plus external costs). This study attempts to estimate the external costs of landfilling in the City of Cape Town for different scenarios, using the benefits transfer method (for emissions) and the hedonic pricing method (for disamenities). Both methods (in particular the process of transferring and adjusting estimates from one study site to another) are described in detail, allowing the procedures to be replicated elsewhere. The results show that external costs are currently R111 (in South African Rands, or approximately US$16) per tonne of waste, although these could decline under a scenario in which energy is recovered, or in which the existing urban landfills are replaced with a new regional landfill.

Zonal structure of unbounded external-flow and aerodynamics

Energy Technology Data Exchange (ETDEWEB)

Liu, L Q; Kang, L L; Wu, J Z, E-mail: lqliu@pku.edu.cn [State Key Laboratory of Turbulence and Complex System, Center for Applied Physics and Technology, College of Engineering, Peking University, Beijing 100871 (China)

2017-08-15

This paper starts from the far-field behaviors of velocity field in externally unbounded flow. We find that the well-known algebraic decay of disturbance velocity as derived kinematically is too conservative. Once the kinetics are taken into account by working on the fundamental solutions of far-field linearized Navier–Stokes equations, it is proven that the furthest far-field zone adjacent to the uniform fluid at infinity must be unsteady, viscous and compressible, where all disturbances degenerate to sound waves that decay exponentially. But this optimal rate does not exist in some commonly used simplified flow models, such as steady flow, incompressible flow and inviscid flow, because they actually work in true subspaces of the unbounded free space, which are surrounded by further far fields of different nature. This finding naturally leads to a zonal structure of externally unbounded flow field. The significance of the zonal structure is demonstrated by its close relevance to existing theories of aerodynamic force and moment in external flows, including the removal of the difficulties or paradoxes inherent in the simplified models. (paper)

EU environmental state aid policy: wide implications, narrow participation?

Energy Technology Data Exchange (ETDEWEB)

Flaam, Karoline

2008-11-15

This article investigates the 2008 reform of the EU's environmental state aid guidelines, with an eye to determining the degree of external pressure and lobbyism towards environmental state aid policies. What is found is a strikingly low level of external pressure on the policy-field, not least on the part of the private sector. In fact, EU environmental state aid policy is largely the making of a few Commission officials, without much external 'interference'. The article discusses possible reasons for this, and asks whether state aid policy-making might be marked less by clear and established interests and utility maximising, and more by actors constrained by complexity and bounded rationality. (author). refs.,tab

Long-dated evaluation of the external costs of the nuclear; L'evaluation des couts externes a long terme de la filiere nucleaire: interets et limites

Energy Technology Data Exchange (ETDEWEB)

Le Dars, A.; Schneider, T

2002-09-01

Since the middle of the years 1990, the European Commission developed an ''ExternE'' methodology to propose an homogenous evaluation of the sanitary and environmental external costs of the various energy sectors in Europe. This document discusses the taking into account of the long-dated and analyzes the interests and the limits of the monetary evaluation, in terms of external costs, of the nuclear choice. It is organized in three chapters: 1. a presentation and a discussion on the various evaluation of the ''ExternE'' methodology; 2. a description of the available methods for the monetary evaluation of the long-dated impacts and more particularly the analysis of the monetary values actualization principle; 3. highlighted of the impacts for which the monetary evaluations exist. (A.L.B.)

Pricing landfill externalities: emissions and disamenity costs in Cape Town, South Africa.

Science.gov (United States)

Nahman, Anton

2011-01-01

The external (environmental and social) costs of landfilling (e.g. emissions to air, soil and water; and 'disamenities' such as odours and pests) are difficult to quantify in monetary terms, and are therefore not generally reflected in waste disposal charges or taken into account in decision making regarding waste management options. This results in a bias against alternatives such as recycling, which may be more expensive than landfilling from a purely financial perspective, but preferable from an environmental and social perspective. There is therefore a need to quantify external costs in monetary terms, so that different disposal options can be compared on the basis of their overall costs to society (financial plus external costs). This study attempts to estimate the external costs of landfilling in the City of Cape Town for different scenarios, using the benefits transfer method (for emissions) and the hedonic pricing method (for disamenities). Both methods (in particular the process of transferring and adjusting estimates from one study site to another) are described in detail, allowing the procedures to be replicated elsewhere. The results show that external costs are currently R111 (in South African Rands, or approximately US$16) per tonne of waste, although these could decline under a scenario in which energy is recovered, or in which the existing urban landfills are replaced with a new regional landfill. Copyright © 2011 Elsevier Ltd. All rights reserved.