WorldWideScience

Sample records for external energy source

  1. Energy generation externalities with conventional and renewable sources; Externalidades da geracao de energia com fontes convencionais e renovaveis

    Energy Technology Data Exchange (ETDEWEB)

    Shayani, Rafael Amaral; Oliveira, Marco Aurelio Goncalves de [Universidade de Brasilia (UnB), DF (Brazil). Dept. de Engenharia Eletrica. Lab. de Fontes Alternativas de Energia

    2008-07-01

    The energy generation externalities have both positive and negative sides. The conventional sources, including fossil and nuclear fuel, have environment, political, economical and social negative externalities. The environment one affects the world climate, the political one includes the wars caused by oil control, the governmental financial support is economical aspects, and black outs, that affect all citizen's job, are a social example. The photovoltaic solar energy has a negative externality when the lead-acid battery is used into stand-alone systems. This batteries need special attention because has harmful components that can pollute the water. The use of other way to storage the energy is a solution to this, like non pollute batteries, electrostatic accumulation, flywheels, compressed air, hydrogen fuel cell or thermo accumulation. The PV system can be grid-connected too; this solutions have positive externalities, because the solar collector can replace the electric shower, reducing the transmission system demand during the peak time, and saving some energy from the conventional power plant during drought season. A house's roof can support more than twice of PV system needed to supply the energy of the house, so the potential to use the solar energy without needing new places is huge. The consciousness that the Earth is but one country, and mankind its citizens, should be adopted for all mankind, because the environment pollution of a specific place affects everyone, and the negative externalities must be calculated. The PV prices is getting cheaper each year, forecasting 45% of price reduction into the next 10 years. The governmental support to use solar hot water at residences, research and nationalization of the PV production are necessary to amplify the positive externalities of the solar energy. (author)

  2. External Knowledge Sourcing and Green Innovation Growth with Environmental and Energy Regulations: Evidence from Manufacturing in China

    Directory of Open Access Journals (Sweden)

    Jian Hou

    2017-02-01

    Full Text Available This paper adopts the slacks-based measure-directional distance function (SBM-DDF, 2009 method for deriving the “Green Innovation Growth” rates of 28 manufacturing industries in China. The results indicate that the overall level of green innovation growth in China’s manufacturing is relatively low, with a declining trend. The tradeoffs among energy, environment and economy are rather sharp, and the “Porter Effect (1995” (environmental regulation will promote green technology innovation is not currently realized quickly in manufacturing. These evaluations imply an unsustainable development model in China, with significant differences among industries. By using a dynamic panel threshold model and employing an industry-level panel dataset for 2008–2014, we show that external knowledge sourcing has a significant negative impact on green innovation growth but with different constraints on R&D levels among industries. With the strengthening of R&D levels, gradually surpassing “critical mass”, the negative role of external knowledge sourcing in driving this mechanism becomes smaller and smaller; it has a non-linear relationship with the “threshold effect”. Consequently, we provide insights into the relationship among energy consumption, environmental pollution and technology innovation, and show how the heterogeneity of the R&D threshold affects differences in external knowledge sourcing and green innovation growth. These insights lead to a better understanding of the driving force, realizing path and policy design for green innovation growth.

  3. Numerical Modeling of Conjugate Thermogravitational Convection in a Closed System with a Radiant Energy Source in Conditions of Convective-Radiative Heat Exchange at the External Boundary

    OpenAIRE

    Nee Alexander

    2016-01-01

    Mathematical modeling of conjugate natural convection in a closed rectangular cavity with a radiant energy source in conditions of convective-radiative heat exchange at the external boundary was conducted. The radiant energy distribution was set by the Lambert’s law. Conduction and convection processes analysis showed that the air masses flow pattern is modified slightly over the time. The temperature increases in the gas cavity, despite the heat removal from the one of the external boundary....

  4. Leveraging External Sources of Innovation

    DEFF Research Database (Denmark)

    West, Joel; Bogers, Marcel

    2014-01-01

    This paper reviews research on open innovation that considers how and why firms commercialize external sources of innovations. It examines both the “outside-in” and “coupled” modes of open innovation. From an analysis of prior research on how firms leverage external sources of innovation...... cited work beyond those journals. A review of 291 open innovation-related publications from these sources shows that the majority of these articles indeed address elements of this inbound open innovation process model. Specifically, it finds that researchers have front-loaded their examination...... external innovations create value rather than how firms capture value from those innovations. Finally, the interaction phase considers both feedback for the linear process and reciprocal innovation processes such as cocreation, network collaboration, and community innovation. This review and synthesis...

  5. Organizing for External Knowledge Sourcing

    DEFF Research Database (Denmark)

    Rabbiosi, Larissa; Reichstein, Toke

    2011-01-01

    The aim of this article is to provide an introduction to the special issue. We briefly consider the external knowledge sourcing and organizing for innovation literatures, which offer a background for the special issue, and we highlight their mutual dialogue. We then illustrate the main findings...

  6. Unimodular gravity with external sources

    CERN Document Server

    Álvarez, Enrique

    2012-01-01

    The only allowed source of the gravitational field in the unimodular theory, invariant under area-preserving (transverse) diffeomorphisms as well as Weyl transformations, is just the traceless piece of the energy-momentum tensor. This fact notwithstanding, the free energy produced by arbitrary sources (not only static ones) is identical to the one predicted by general relativity. This encompasses all weak field tests of gravitation. There is an important difference with general relativity though. A pure trace source, such as the one produced by a pure vacuum energy with frozen scalar field does not weigh at all. This sheds new light on the direct cosmological constant problem.

  7. Leveraging External Sources of Innovation

    DEFF Research Database (Denmark)

    West, Joel; Bogers, Marcel

    2014-01-01

    own specific set of mechanisms and conditions. Integrating innovations has been mostly studied from an absorptive capacity perspective, with less attention given to the impact of competencies and culture (including “not invented here”). Commercializing innovations puts the most emphasis on how......” in a way inconsistent with earlier definitions in innovation management. The paper concludes with recommendations for future research that include examining the end-to-end innovation commercialization process, and studying the moderators and limits of leveraging external sources of innovation....

  8. Energy Deposition in the Body from External Sources to Chemically Trigger Cellular Responses in Desired Localized Regions

    Science.gov (United States)

    Ibsen, Stuart Duncan

    One of the major challenges of modern chemotherapy is to deliver a therapeutic dose of active drug to the tumor tissue without causing systemic exposure. The realization of this goal could considerably reduce the negative side effects experienced by patients. The work conducted in this thesis looks at two different approaches to trigger drug activation with the use of external energy sources. This avoids the challenges of relying solely on biochemical and environmental differences as triggers. The two triggers used were low intensity focused ultrasound and 365 nm light delivered with a custom designed needle UV LED fiber optic system. Both can be localized within the body to spatially highlight just the tumor tissue creating a stark differentiation between it and the healthy tissue. The 365nm light based delivery scheme developed here was the first demonstration of a photoactivatable doxorubicin (DOX) prodrug called DOX-PCB. DOX-PCB was shown to be 200 times less toxic than DOX and could be activated to a fully therapeutic form upon exposure to 365nm light. The pharmacokinetics showed a circulation half life comparable to that of DOX and stability against in vivo metabolic degradation. The 365 nm light was shown to adequately irradiate a centimeter of tumor tissue and cause localized activation. In vivo tumors exposed to the light had significantly higher doses of DOX than unexposed control tumors in the same individual. The second delivery scheme made use of focused ultrasound to activate echogenic drug delivery vehicles. These vehicles were the first demonstration of encapsulating microbubbles within liposomes. Specially designed optical equipment documented that the microbubble was ultrasound responsive. The microbubble was shown to violently cavitate and rupture the outer liposome membrane releasing the payload contents. The three dimensional localization of activation was demonstrated in tissue phantoms. The strengths of these two delivery schemes could

  9. Magnetospheric ULF waves driven by external sources

    CERN Document Server

    Agapitov, Oleksiy

    2015-01-01

    The multi-spacecraft missions (Cluster and THEMIS) observations allowed to collect large data base for Ultra Low Frequency (ULF) waves properties, their localization, and sources. Mainly here we focused on these recent results. Studying of the source and characteristics of ULF waves can help in the understanding of the interaction and energy transport from solar wind to the magnetosphere. Here we present peculiarities of ULF waves generated by different solar wind phenomenon: surface magnetopause instability, magnetosphere cavity modes and solar wind dynamic pressure sudden impulses (SI) penetration into the magnetosphere. Permanent observations of ULF waves involve existence of the permanent source and, as the previous studies showed, the contributions to Pc4-Pc5 ULF wave power from the external sources are larger than the contribution from internal magnetosphere sources. The Kelvin-Helmholtz instability (KHI) can generate on the magnetosphere flanks classical ULF resonant waves with spatially localized ampl...

  10. Numerical Modeling of Conjugate Thermogravitational Convection in a Closed System with a Radiant Energy Source in Conditions of Convective-Radiative Heat Exchange at the External Boundary

    Directory of Open Access Journals (Sweden)

    Nee Alexander

    2016-01-01

    Full Text Available Mathematical modeling of conjugate natural convection in a closed rectangular cavity with a radiant energy source in conditions of convective-radiative heat exchange at the external boundary was conducted. The radiant energy distribution was set by the Lambert’s law. Conduction and convection processes analysis showed that the air masses flow pattern is modified slightly over the time. The temperature increases in the gas cavity, despite the heat removal from the one of the external boundary. According to the results of the integral heat transfer analysis were established that the average Nusselt number (Nuav increasing occurs up to τ = 200 (dimensionless time. Further Nuav has changed insignificantly due to the temperature field equalization near the interfaces “gas – wall”.

  11. Concurrent sourcing and external supplier opportunism

    DEFF Research Database (Denmark)

    Mols, Niels Peter

    When a firm simultaneously makes and buys the same components then the firm uses concurrent sourcing. This paper presents an agency model for explaining how and when concurrent sourcing reduces the likelihood of external supplier opportunism. In the proposed model, the external supplier’s expected...

  12. Negative ion source with external RF antenna

    Science.gov (United States)

    Leung, Ka-Ngo; Hahto, Sami K.; Hahto, Sari T.

    2007-02-13

    A radio frequency (RF) driven plasma ion source has an external RF antenna, i.e. the RF antenna is positioned outside the plasma generating chamber rather than inside. The RF antenna is typically formed of a small diameter metal tube coated with an insulator. An external RF antenna assembly is used to mount the external RF antenna to the ion source. The RF antenna tubing is wound around the external RF antenna assembly to form a coil. The external RF antenna assembly is formed of a material, e.g. quartz, which is essentially transparent to the RF waves. The external RF antenna assembly is attached to and forms a part of the plasma source chamber so that the RF waves emitted by the RF antenna enter into the inside of the plasma chamber and ionize a gas contained therein. The plasma ion source is typically a multi-cusp ion source. A converter can be included in the ion source to produce negative ions.

  13. Concurrent sourcing and external supplier opportunism

    DEFF Research Database (Denmark)

    Mols, Niels Peter

    When a firm simultaneously makes and buys the same components then the firm uses concurrent sourcing. This paper presents an agency model for explaining how and when concurrent sourcing reduces the likelihood of external supplier opportunism. In the proposed model, the external supplier’s expected...... costs of opportunism are determined as a product of four factors. The four factors are: likelihood of discovering supplier opportunism, buyer’s internalized quantity as reaction to supplier opportunism, asset specificity of external supplier’s investments, and multiplicator effects. Each...

  14. Assessment of the externalities of biomass energy for electricity production

    Energy Technology Data Exchange (ETDEWEB)

    Linares, P.; Leal, J.; Saez, R.M.

    1996-10-01

    This study presents a methodology for the quantification of the socioeconomic and environmental externalities of the biomass fuel cycle. It is based on the one developed by the ExternE Project of the European Commission, based in turn in the damage function approach, and which has been extended and modified for a better adaptation to biomass energy systems. The methodology has been applied to a 20 MW biomass power plant, fueled by Cynara cardunculus, in southern Spain. The externalities addressed have been macroeconomic effects, employment, CO{sub 2}, fixation, erosion, and non-point source pollution. The results obtained should be considered only as subtotals, since there are still other externalities to be quantified. anyway, and in spite of the uncertainty existing, these results suggest that total cost (those including internal and external costs) of biomass energy are lower than those of conventional energy sources, what, if taken into account, would make biomass more competitive than it is now. (Author)

  15. Internal Versus External Knowledge Sourcing Of Subsidiaries

    DEFF Research Database (Denmark)

    Gammelgaard, Jens; Pedersen, Torben

    2003-01-01

    When building up competences, a subsidiary of a multinational corporation (MNC) may rely onexternal knowledge sources like customers, suppliers, competitors or local science centers. Internalsourcing is also available through knowledge offered by headquarters or other affiliates. Thequestion...... is whether the two kinds of sources are mutual exclusive. A dilemma or organizationaltrade-off is foreseeable, since the more the subsidiary adapts its knowledge creation processes tohost country institutions, the less it will be able to utilize internal knowledge sources due to theinstitutional distance...... between the external and internal networks. However, newer organizationalforms, like the concept of the `differentiated MNC', imply a relatively smooth flow of knowledgeinside the MNC, indicating that we should not expect an organizational trade-off between internaland external sources. The subsidiary...

  16. The avoided external costs of using wind energy

    Energy Technology Data Exchange (ETDEWEB)

    Markandya, A. [Harvard Inst. for International Development, Cambridge, MA (United States)

    1995-12-31

    This article discusses the external costs of electricity generated by conventional fossil fuel sources, such as coal and nuclear power. It compares the costs of electricity generated with coal with that generated with wind. A measure of the benefits of wind energy is the difference between these two external costs. The methodology used for the estimation of the external costs, as well as the estimates of these costs, are taken from the EC ExternE study, financed by DGXII of the European Commission. The present author was a lead economist for that study. (author)

  17. The SNS External Antenna H- Ion Source

    Energy Technology Data Exchange (ETDEWEB)

    Welton, Robert F [ORNL; Stockli, Martin P [ORNL; Murray Jr, S N [ORNL; Crisp, Danny W [ORNL; Carmichael, Justin R [ORNL; Goulding, Richard Howell [ORNL; Han, Baoxi [ORNL; Pennisi, Terry R [ORNL; Santana, Manuel [ORNL

    2010-01-01

    The U.S. Spallation Neutron Source (SNS) is an accelerator-based, pulsed neutron-scattering facility, currently in the process of ramping up neutron production. In order to insure that we will meet our operational commitments as well as provide for future facility upgrades with high reliability, we have developed an RF-driven, H- ion source based on a ceramic aluminum nitride (AlN) plasma chamber [1]. This source is expected to be utilized by the SNS for neutron production starting in 2009. This report details the design of the production source which features an AlN plasma chamber, 2-layer external antenna, cooled-multicusp magnet array, Cs2CrO4 cesium system and a Molybdenum plasma ignition gun. Performance of the production source both on the SNS accelerator and SNS test stand is reported. The source has also been designed to accommodate an elemental Cs system with an external reservoir which has demonstrated unanalyzed beam currents up to ~100mA (60Hz, 1ms) on the SNS ion source test stand.

  18. Influence of external source location in the reactivity calculation

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Adilson Costa da; Silva, Fernando Carvalho da; Martinez, Aquilino Senra, E-mail: asilva@con.ufrj.b, E-mail: fernando@con.ufrj.b, E-mail: Aquilino@lmp.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (PEN/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2011-07-01

    We used the neutron diffusion equation with external neutron sources, in cartesian geometry and the two groups of energy, to verify the influence of external neutron source locations in the reactivity calculation. For this, a coarse mesh finite difference method was developed for the adjoint flux calculation and simplifies reactivity calculation in PWR type reactor, which uses the output of the nodal expansion method. The results were obtained for different locations on the two-dimensional plane, as well as for different types of fuel elements in the reactor core. (author)

  19. Random matrix theory with an external source

    CERN Document Server

    Brézin, Edouard

    2016-01-01

    This is a first book to show that the theory of the Gaussian random matrix is essential to understand the universal correlations with random fluctuations and to demonstrate that it is useful to evaluate topological universal quantities. We consider Gaussian random matrix models in the presence of a deterministic matrix source. In such models the correlation functions are known exactly for an arbitrary source and for any size of the matrices. The freedom given by the external source allows for various tunings to different classes of universality. The main interest is to use this freedom to compute various topological invariants for surfaces such as the intersection numbers for curves drawn on a surface of given genus with marked points, Euler characteristics, and the Gromov–Witten invariants. A remarkable duality for the average of characteristic polynomials is essential for obtaining such topological invariants. The analysis is extended to nonorientable surfaces and to surfaces with boundaries.

  20. New renewable energy sources; Nye fornybare energikilder

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This booklet describes in simple terms the so-called new renewable energy sources: solar energy, biomass, wind power and wave power. In addition, there are brief discussions on hydrogen, ocean thermal energy conversion (OTEC), tidal power, geothermal energy, small hydropower plants and energy from salt gradients. The concept of new renewable energy sources is used to exclude large hydropower plants as these are considered conventional energy sources. The booklet also discusses the present energy use, the external frames for new renewable energy sources, and prospects for the future energy supply.

  1. Diversification of energy sources

    Science.gov (United States)

    1975-01-01

    The concept of energy source diversification was introduced as a substitution conservation action. The current status and philosophy behind a diversification program is presented in the context of a national energy policy. Advantages, disadvantages (constraints), and methods of implementation for diversification are discussed. The energy source systems for diversification are listed and an example impact assessment is outlined which deals with the water requirements of the specific energy systems.

  2. Diversification of energy sources

    Science.gov (United States)

    1975-01-01

    The concept of energy source diversification was introduced as a substitution conservation action. The current status and philosophy behind a diversification program is presented in the context of a national energy policy. Advantages, disadvantages (constraints), and methods of implementation for diversification are discussed. The energy source systems for diversification are listed and an example impact assessment is outlined which deals with the water requirements of the specific energy systems.

  3. Alternative Energy Sources

    CERN Document Server

    Michaelides, Efstathios E (Stathis)

    2012-01-01

    Alternative Energy Sources is designed to give the reader, a clear view of the role each form of alternative energy may play in supplying the energy needs of the human society in the near and intermediate future (20-50 years).   The two first chapters on energy demand and supply and environmental effects, set the tone as to why the widespread use of alternative energy is essential for the future of human society. The third chapter exposes the reader to the laws of energy conversion processes, as well as the limitations of converting one energy form to another. The sections on exergy give a succinct, quantitative background on the capability/potential of each energy source to produce power on a global scale. The fourth, fifth and sixth chapters are expositions of fission and fusion nuclear energy. The following five chapters (seventh to eleventh) include detailed descriptions of the most common renewable energy sources – wind, solar, geothermal, biomass, hydroelectric – and some of the less common sources...

  4. Improvements to the internal and external antenna H(-) ion sources at the Spallation Neutron Source.

    Science.gov (United States)

    Welton, R F; Dudnikov, V G; Han, B X; Murray, S N; Pennisi, T R; Pillar, C; Santana, M; Stockli, M P; Turvey, M W

    2014-02-01

    The Spallation Neutron Source (SNS), a large scale neutron production facility, routinely operates with 30-40 mA peak current in the linac. Recent measurements have shown that our RF-driven internal antenna, Cs-enhanced, multi-cusp ion sources injects ∼55 mA of H(-) beam current (∼1 ms, 60 Hz) at 65-kV into a Radio Frequency Quadrupole (RFQ) accelerator through a closely coupled electrostatic Low-Energy Beam Transport system. Over the last several years a decrease in RFQ transmission and issues with internal antennas has stimulated source development at the SNS both for the internal and external antenna ion sources. This report discusses progress in improving internal antenna reliability, H(-) yield improvements which resulted from modifications to the outlet aperture assembly (applicable to both internal and external antenna sources) and studies made of the long standing problem of beam persistence with the external antenna source. The current status of the external antenna ion source will also be presented.

  5. III. Biological effects of radiation from external and internal sources

    Energy Technology Data Exchange (ETDEWEB)

    Stone, R.S.

    1948-05-24

    This report focuses on the hemotological effects of total body irradiation from external and internal sources observed in patients treated for arthritis with radioactive phosphorus administered intravenously.

  6. Measuring External Sources of Background (R&D) at Homestake

    Science.gov (United States)

    Mei, Dongming; Chan, Yuen-Dat; Elliott, Steve; Gray, Frederick; Keller, Christina; Sun, Yongchen

    2008-04-01

    Measuring external sources of radioactivity at the DUSEL site is the key to success in low-energy neutrino and dark matter (WIMP searches) experiments. Natural radioactivity can be measured using germanium and NaI detectors. Muon-induced neutrons and (a,n) neutrons will be measured utilizing liquid scintillators and germanium detectors through the 72Ge(n,nxe) reaction. External sources of background, particularly fast neutrons and cosmogenic radioactivity from muon-induced processes, are background matter that must be eliminated for underground experiments in pursuit of double beta decay, WIMPs, and oscillations of low-energy neutrinos. However, muon-induced neutron production rates with heavy elements, such as lead and copper, are not well understood. The discrepancy between the measurements and FLUKA simulations is as large as about a factor of 3. This discrepancy needs be understood for the muon- induced fast neutron production rate in lead and copper, which are the most popular materials for shielding underground experiments. We propose an experiment at 300-ft level to measure the muon-induced fast neutron production rate in different targets.

  7. HOW DO FIRMS SOURCE EXTERNAL KNOWLEDGE FOR INNOVATION? ANALYSING EFFECTS OF DIFFERENT KNOWLEDGE SOURCING METHODS

    OpenAIRE

    KI H. KANG; JINA KANG

    2009-01-01

    In the era of "open innovation", external knowledge is a very important source for technology innovation. In this paper, we investigate the relationship between external knowledge and performance of technology innovation. The effect of external knowledge on the performance of technology innovation can vary with different external knowledge sourcing methods. We identify three ways of external knowledge sourcing: information transfer from informal network, R&D collaboration and technology acqui...

  8. A New Energy Source

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Foreign energy companies are flocking to China to participate in the development of a potentially meaningful new energy source, coalbed methane, which is found in coal deposits. China United Coalbed Methane Co. Ltd. signed a contract with U.S.-based Orion Energy International Inc. on April 5 to jointly exploit the resource in the Sanjiao region of coal-rich Shanxi Province. Covering an area of some 462 square km, Sanjiao is home to rich coalbed methane reserves with thick, multi-level coalbeds that have ...

  9. Classical Noncommutative Electrodynamics with External Source

    CERN Document Server

    Adorno, T C; Shabad, A E; Vassilevich, D V

    2011-01-01

    In a $U(1)_{\\star}$-noncommutative (NC) gauge field theory we extend the Seiberg-Witten (SW) map to include the (gauge-invariance-violating) external current and formulate - to the first order in the NC parameter - gauge-covariant classical field equations. We find solutions to these equations in the vacuum and in an external magnetic field, when the 4-current is a static electric charge of a finite size $a$, restricted from below by the elementary length. We impose extra boundary conditions, which we use to rule out all singularities, $1/r$ included, from the solutions. The selected solutions neither should nor do withstand the limiting transition $a \\rightarrow 0$. The static charge proves to be a magnetic dipole, with the magnetic moment depending on its size $a$. The external magnetic field modifies the long-range Coulomb field and some electromagnetic form-factors. We also analyze the ambiguity in the SW map and show that at least to the order studied here it is equivalent to the ambiguity of adding a ho...

  10. 10 CFR 34.21 - Limits on external radiation levels from storage containers and source changers.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Limits on external radiation levels from storage... INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.21 Limits on external radiation levels from storage containers and source changers. The...

  11. Optimal condition of memristance enhancement circuit using external voltage source

    Directory of Open Access Journals (Sweden)

    Hiroya Tanaka

    2014-05-01

    Full Text Available Memristor provides nonlinear response in the current-voltage characteristic and the memristance is modulated using an external voltage source. We point out by solving nonlinear equations that an optimal condition of the external voltage source exists for maximizing the memristance in such modulation scheme. We introduce a linear function to describe the nonlinear time response and derive an important design guideline; a constant ratio of the frequency to the amplitude of the external voltage source maximizes the memristance. The analysis completely accounts for the memristance behavior.

  12. 76 FR 57897 - Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies

    Science.gov (United States)

    2011-09-19

    ... RIN 1904-AB57 Energy Conservation Program: Energy Conservation Standards for Certain External Power... exclude external power supplies used in specific applications from certain energy conservation standards prescribed under the Energy Policy and Conservation Act (EPCA). Congress enacted this exclusion,...

  13. Assessment of environmental external effects in the production of energy

    DEFF Research Database (Denmark)

    Schleisner, L.; Meyer, H.J.; Morthorst, P.E.

    1995-01-01

    A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project...... the environmental damages for the energy production technologies are compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized....

  14. Energy system comprising an electrochemical energy source

    NARCIS (Netherlands)

    Roozeboom, F.; Notten, P.

    2010-01-01

    The invention relates to an energy system comprising an electrochemical energy source, wherein said electrochemical energy source comprises at least one assembly of a first electrode, a second electrode, and an intermediate solid-state electrolyte separating said first electrode and said second elec

  15. Geothermal Energy : An Alternative Source of Energy

    Directory of Open Access Journals (Sweden)

    R R Shah

    2014-04-01

    Full Text Available Nowadays renewable sources are preferred over the non renewable source to generate the energy. The rapid rates of exhausting non-renewable resources have completed us to look out for new avenues in energy generation. According to global energy scenario, developed countries are adopting renewable resources as major source of energy. Geothermal energy originates from the original formation of the planet, from radioactive decay of minerals, and from solar energy absorbed at the surface. Geothermal energy is derived from the hot interior of the earth. The earth is a reservoir of heat energy, most of which is buried and is observed during episodes of volcanic eruption at the surfaces. Geothermal is one of the most promising renewable source of energy which is plentiful, eco-friendly, reliable and clean source of energy available in earth crust. In our country there is wide scope for the utilization of geothermal energy with proper strategically approach to meet the energy requirement. The future prospects of this heat energy as a sustainable source of renewable energy are indeed promising. Today India is the fifth largest consumer of electricity and by 2030 it will become third largest overtaking Japan and Russia according to statistical data available by Energy Planning Commission, Government of India.

  16. 77 FR 22472 - Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies...

    Science.gov (United States)

    2012-04-16

    ... Part 430 RIN 1904-AB57 Energy Conservation Program: Energy Conservation Standards for Certain External... energy conservation standards for certain external power supplies to re-insert a table that had been... statutorily-prescribed energy conservation standards for all Class A external power supplies to meet....

  17. UCN Source at an External Beam of Thermal Neutrons

    Directory of Open Access Journals (Sweden)

    E. V. Lychagin

    2015-01-01

    Full Text Available We propose a new method for production of ultracold neutrons (UCNs in superfluid helium. The principal idea consists in installing a helium UCN source into an external beam of thermal or cold neutrons and in surrounding this source with a solid methane moderator/reflector cooled down to ~4 K. The moderator plays the role of an external source of cold neutrons needed to produce UCNs. The flux of accumulated neutrons could exceed the flux of incident neutrons due to their numerous reflections from methane; also the source size could be significantly larger than the incident beam diameter. We provide preliminary calculations of cooling of neutrons. These calculations show that such a source being installed at an intense source of thermal or cold neutrons like the ILL or PIK reactor or the ESS spallation source could provide the UCN density 105 cm−3, the production rate 107 UCN/s−1. Main advantages of such an UCN source include its low radiative and thermal load, relatively low cost, and convenient accessibility for any maintenance. We have carried out an experiment on cooling of thermal neutrons in a methane cavity. The data confirm the results of our calculations of the spectrum and flux of neutrons in the methane cavity.

  18. Energy Sources: An Historical Perspective.

    Science.gov (United States)

    Perry, Constance M.

    1983-01-01

    Putting the present energy situation into an historical perspective provides meaning to today's energy concerns and demonstrates how important energy has always been to our life style. Primary energy sources of the United States from 1850 to the present are examined. (RM)

  19. On the addition of heat to solar pond from external sources

    NARCIS (Netherlands)

    Ganguly, S.; Jain, Ravi; Date, Abhijit; Akbarzadeh, Aliakbar

    2017-01-01

    This brief note addresses the method of adding heat to a solar pond from an external source which is used to enhance the performance of a solar pond. Heat energy collected by Evacuated Tube Solar Collectors (ETSC) is transferred by circulating fluid from the Lower Convective Zone (LCZ) of a solar po

  20. On the addition of heat to solar pond from external sources

    NARCIS (Netherlands)

    Ganguly, S.; Jain, Ravi; Date, Abhijit; Akbarzadeh, Aliakbar

    2017-01-01

    This brief note addresses the method of adding heat to a solar pond from an external source which is used to enhance the performance of a solar pond. Heat energy collected by Evacuated Tube Solar Collectors (ETSC) is transferred by circulating fluid from the Lower Convective Zone (LCZ) of a solar

  1. Improvements to the internal and external antenna H{sup −} ion sources at the Spallation Neutron Source

    Energy Technology Data Exchange (ETDEWEB)

    Welton, R. F., E-mail: welton@ornl.gov; Han, B. X.; Murray, S. N.; Pennisi, T. R.; Pillar, C.; Santana, M.; Stockli, M. P. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, Tennessee 37830-6471 (United States); Dudnikov, V. G. [Muons, Inc., 552 N. Batavia Avenue, Batavia, Illinois 60510 (United States); Turvey, M. W. [Villanova University, 800E. Lancaster Ave, Villanova, Pennsylvania 19085 (United States)

    2014-02-15

    The Spallation Neutron Source (SNS), a large scale neutron production facility, routinely operates with 30–40 mA peak current in the linac. Recent measurements have shown that our RF-driven internal antenna, Cs-enhanced, multi-cusp ion sources injects ∼55 mA of H{sup −} beam current (∼1 ms, 60 Hz) at 65-kV into a Radio Frequency Quadrupole (RFQ) accelerator through a closely coupled electrostatic Low-Energy Beam Transport system. Over the last several years a decrease in RFQ transmission and issues with internal antennas has stimulated source development at the SNS both for the internal and external antenna ion sources. This report discusses progress in improving internal antenna reliability, H{sup −} yield improvements which resulted from modifications to the outlet aperture assembly (applicable to both internal and external antenna sources) and studies made of the long standing problem of beam persistence with the external antenna source. The current status of the external antenna ion source will also be presented.

  2. Desiccant Dewpoint Cooling System Independent of External Water Sources

    DEFF Research Database (Denmark)

    Bellemo, Lorenzo; Elmegaard, Brian; Markussen, Wiebke B.

    2015-01-01

    This paper presents a patent pending technical solution aiming to make desiccant cooling systems independent of external water sources, hence solving problems of water availability, cost and treatment that can decrease the system attractiveness. The solution consists in condensing water from the ...... to the desiccant dew-point system without water recovery, the required regeneration temperature increases and the system thermal efficiency decreases.......This paper presents a patent pending technical solution aiming to make desiccant cooling systems independent of external water sources, hence solving problems of water availability, cost and treatment that can decrease the system attractiveness. The solution consists in condensing water from...... the air that regenerates the desiccant dehumidifier, and using it for running the evaporative coolers in the system. A closed regeneration circuit is used for maximizing the amount of condensed water. This solution is applied to a system with a desiccant wheel dehumidifier and a dew point cooler, termed...

  3. ALTERNATIVE SOURCES OF ENERGY - ALTERNATIVE SOURCES OF POLLUTION?

    Directory of Open Access Journals (Sweden)

    Marius-Razvan SURUGIU

    2007-06-01

    Full Text Available In many countries of the world investments are made for obtaining energy efficiency, pursuing to increase the generation of non-polluting fuels due to the fact that energy is vital for any economy. The increase in non-polluting fuels and in renewable energy generation might lead to diminishing the dependence of countries less endowed with conventional energy resources on oil and natural gas from Russia or from Arab countries. Nevertheless, environmental issues represent serious questions facing the mankind, requiring the identification, prevention, and why not, their total solving.European Union countries depend on imports of energy, especially on oil imports. At the same time, the European Union countries record a high volume of greenhouse gas emissions, substances adding to global warming. The transport sector is the main consumer of fossil fuels and generator of greenhouse gas emissions. Therefore, diversifying the energy supply used in the transport sector with less polluting sources is an essential objective of the European Union policy in the transport, energy and environment sector. Road transports’ is the sector recording the highest consumption of energy and the highest volume of greenhouse gas emissions.The use of ecologic fuels in the transport sector is an important factor for achieving the objectives of European policies in the field. It is yet to be seen to what extent alternative energy sources are damaging to the environment, as it is a known fact that even for them is recorded a certain level of negative externalities.

  4. Renewable energy sources; Erneuerbare Energien

    Energy Technology Data Exchange (ETDEWEB)

    Lenz, Volker [Deutsches BiomasseForschungsZentrum gGmbH (DBFZ), Leipzig (Germany); Kaltschmitt, Martin [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Inst. fuer Umwelttechnik und Energiewirtschaft

    2012-07-01

    The development of the use of renewable energy sources in Germany in 2011 significantly was influenced by the disaster in Fukushima (Japan) and the change of course in the German energy policy. In addition, there is the amendment of the Renewable Energy Law (EEG) in an increasingly controversial area of tension between climate protection, energy utilization, cost minimization and considerations on sustainability. With this in mind, the authors of the contribution under consideration report on developments in Germany in the year 2011 in the field of energy supply and fuel supply from renewable energies. Beside the energy-economic framework conditions for the various possibilities for the use of renewable energies, the current status, developments and prospects are analysed. The contribution gives an outlook on the possible expansion of the supply of renewable energies in 2012.

  5. External Source Method for Kubo-Transformed Quantum Correlation Functions

    CERN Document Server

    Horikoshi, Atsushi

    2014-01-01

    We revisit the external source method for Kubo-transformed quantum correlation functions recently proposed by Krishna and Voth. We derive an exact formula and show that the Krishna-Voth formula can be derived as an approximation of our formula. Some properties of this approximation are clarified through a model calculation of the position autocorrelation function for a one-dimensional harmonic oscillator. A key observation is that the Krishna-Voth correlation function has a term which behaves as the secular term in perturbation theory.

  6. TEM Pump With External Heat Source And Sink

    Science.gov (United States)

    Nesmith, Bill J.

    1991-01-01

    Proposed thermoelectric/electromagnetic (TEM) pump driven by external source of heat and by two or more heat pipe radiator heat sink(s). Thermoelectrics generate electrical current to circulate liquid metal in secondary loop of two-fluid-loop system. Intended for use with space and terrestrial dual loop liquid metal nuclear reactors. Applications include spacecraft on long missions or terrestrial beacons or scientific instruments having to operate in remote areas for long times. Design modified to include multiple radiators, converters, and ducts, as dictated by particular application.

  7. New renewable energy sources; Nye fornybare energikilder. Revidert utgave 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    This publication presents a review of the technological, economical and market status in the field of new renewable energy sources. It also deals briefly with the present use of energy, external conditions for new renewable energy sources and prospects for these energy sources in a future energy system. The renewable energy sources treated here are ''new'' in the sense that hydroelectric energy technology is excluded, being fully developed commercially. This publication updates a previous version, which was published in 1996. The main sections are: (1) Introduction, (2) Solar energy, (3) Bio energy, (4) Wind power, (5) Energy from the sea, (6) Hydrogen, (7) Other new renewable energy technologies and (8) New renewables in the energy system of the future.

  8. Locally covariant quantum field theory with external sources

    CERN Document Server

    Fewster, Christopher J

    2014-01-01

    We provide a detailed analysis of the classical and quantized theory of a multiplet of inhomogeneous Klein-Gordon fields, which couple to the spacetime metric and also to an external source term; thus the solutions form an affine space. Following the formulation of affine field theories in terms of presymplectic vector spaces as proposed in [Annales Henri Poincare 15, 171 (2014)], we determine the relative Cauchy evolution induced by metric as well as source term perturbations and compute the automorphism group of natural isomorphisms of the presymplectic vector space functor. Two pathological features of this formulation are revealed: the automorphism group contains elements that cannot be interpreted as global gauge transformations of the theory; moreover, the presymplectic formulation does not respect a natural requirement on composition of subsystems. We therefore propose a systematic strategy to improve the original description of affine field theories at the classical and quantized level, first passing ...

  9. Constraining the effective action by a method of external sources

    CERN Document Server

    Garbrecht, Bjorn

    2015-01-01

    We propose a novel method of evaluating the effective action, wherein the physical one- and two-point functions are obtained in the limit of non-vanishing external sources. We illustrate the self-consistency of this method by recovering the usual 2PI effective action due to Cornwall, Jackiw and Tomboulis, differing only by the fact that the saddle-point evaluation of the path integral is performed along the extremal quantum, rather than classical, path. As such, this approach is of particular relevance to situations where the dominant quantum and classical paths are non-perturbatively far away from one-another. A pertinent example is the decay of false vacua in radiatively-generated potentials, as may occur for the electroweak vacuum of the Standard Model. In addition, we describe how the external sources may instead be chosen so as to yield the two-particle-point-irreducible (2PPI) effective action of Coppens and Verschelde. Finally, in the spirit of the symmetry-improved effective action of Pilaftsis and Te...

  10. EXTERNAL SOURCES OF URBAN COMPETITIVE ADVANTAGES IN CHINA

    Institute of Scientific and Technical Information of China (English)

    YU Tao-fang; GU Chao-lin; CHEN Xiu-ying

    2005-01-01

    Urban competition refers to capacities of cities for attracting, capturing, controlling, dominating and transforming certain resources during urban development, and capacities for wealth creating, life-standard improving and sustainable development maintenance. This paper first analyzes the external sources of urban competitive advantages: the global network-based advantages and the location-based ones. Then with the aid of method of principal component analysis in SPSS 10.0 for Windows, the Chinese urban global and local competitive advantages are explored. The finding is that the global network-and location-based advantages are remarkable for the cities in the eastern China. While for those in the western and the middle regions, affected by much lower regional competitive advantages and lower degrees of urban-regional integration, the urban competitive advantages are deeply influenced and weakened.

  11. The external energy policy of the European Union

    Energy Technology Data Exchange (ETDEWEB)

    Lesourne, J.; Keppler, Jan Horst; Goetz, Roland; Van der Linde, Coby

    2008-07-01

    This third monograph of the Ifri program on European Governance and Geopolitics of Energy is devoted to the program's first annual conference on the 'External Energy Policy of the European Union'. The conference took place from January 31 to February 1, 2008, at the Palais Egmont, in Brussels, Belgium. Representatives of the European Commission, national governments, academia, and industry examined the European perspectives on the highly topical issue of external energy policy and assessed their relative prospects. The purpose of the conference was to take stock of current policies and to develop perspectives for the future. This monograph comprises five chapters: - A background paper prepared by Jacques Lesourne. A version of this document was given to the speakers prior the conference. It provided a set of questions that were designed to orient their reflection. - Three background papers that introduced some of the questions to be addressed during the three sessions. These papers were written by Jan Horst Keppler, professor at Universite Paris-Dauphine and Senior Research Associate at the Ifri Energy Program; Roland Goetz, Senior Research Fellow at the Institute for International and Security Affairs (SWP), Berlin; and Coby van der Linde, Senior Research Fellow and Director of the Clingendael International Energy Programme (CIEP). - An assessment of the main points raised during the exchanges among the conference participants and an evaluation of the European Union's external energy policy written by J. Lesourne

  12. Networks and external sources of information, section 12

    Science.gov (United States)

    Eckert, P. F.; Wynne, H. G.; Martin, W. A.; Bodini, A.

    1981-01-01

    The basic functional aspects of telecommunications, text searching, and networking are reviewed. Some of the information services, both commercial and noncommercial, which are operational in the United States and Europe are described. The ARPANET, TELENET, TYMET, and EURONET packet networks are described. External online bibliographic data bases and factual data banks are reviewed. Details of services offered, specific topics available, and contact points are given for: (in the United States) the NASA/RECON, DOE/RECON, Defense RDT and E, Lockheed Information System (DIALOG), SDC ORBIT, and the bibliograhic Retrieval systems; and (in Europe), ESA/IRS, the International Atomic Energy Agency, TELESYSTEMS, SPIDEL, INKA DIMDI DATA-STAR, BLAISE, and PERGAMON-INFOLINE systems.

  13. Multicusp ion source with external rf antenna for production of protons

    Science.gov (United States)

    Hahto, S. K.; Hahto, S. T.; Ji, Q.; Leung, K. N.; Wilde, S.; Foley, E. L.; Grisham, L. R.; Levinton, F. M.

    2004-02-01

    Proton beams are needed in neutral-beam injection for diagnostic development of an internal magnetic field measurement. High proton fraction, low axial energy spread, current density in excess of 30 mA/cm2, and a parallel ion beam with cw operation are the requirements for the ion source/extraction system. A multicusp-type ion source with an external rf antenna was constructed at Lawrence Berkeley National Laboratory. A proton fraction of 85% and proton current density of 32 mA/cm2 were achieved at 1.8 kW of rf power. Plasma parameters were measured with a rf compensated Langmuir probe.

  14. Intermediate-energy light sources

    CERN Document Server

    Corbett, W

    2003-01-01

    Increasingly, atomic scale information underlies scientific and technological progress in disciplines ranging from pharmaceutical development to materials synthesis to environmental remediation. While a variety of research tools are used to provide atomic scale information, synchrotron radiation has proved invaluable in this quest. The rapid growth of soft- and hard X-ray synchrotron light sources stands as stark testimony to the importance and utility of synchrotron radiation. Starting from just a handful of synchrotron light sources in the early 1970s, this burgeoning field now includes over 70 proposed, in-construction, or operating facilities in 23 countries on five continents. Along the way, synchrotron light facilities have evolved from small laboratories extracting light parasitically from storage rings designed for high-energy physics research to large, dedicated sources using the latest technology to produce extraordinarily bright photon beams. The basic layout of a multi-GeV storage ring light sourc...

  15. Computer simulations for rf design of a Spallation Neutron Source external antenna H ion source

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sung-Woo [ORNL; Goulding, Richard Howell [ORNL; Kang, Yoon W [ORNL; Shin, Ki [ORNL; Welton, Robert F [ORNL

    2010-01-01

    Electromagnetic modeling of the multicusp external antenna H ion source for the Spallation Neutron Source SNS has been performed in order to optimize high-power performance. During development of the SNS external antenna ion source, antenna failures due to high voltage and multicusp magnet holder rf heating concerns under stressful operating conditions led to rf characteristics analysis. In rf simulations, the plasma was modeled as an equivalent lossy metal by defining conductivity as . Insulation designs along with material selections such as ferrite and Teflon could be included in the computer simulations to compare antenna gap potentials, surface power dissipations, and input impedance at the operating frequencies, 2 and 13.56 MHz. Further modeling and design improvements are outlined in the conclusion.

  16. Liquid metal ion source assembly for external ion injection into an electron string ion source (ESIS)

    Energy Technology Data Exchange (ETDEWEB)

    Segal, M. J., E-mail: mattiti@gmail.com [iThemba LABS, P.O. Box 722, Somerset West 7130 (South Africa); University of Cape Town, Rondebosch, Cape Town 7700 (South Africa); Bark, R. A.; Thomae, R. [iThemba LABS, P.O. Box 722, Somerset West 7130 (South Africa); Donets, E. E.; Donets, E. D.; Boytsov, A.; Ponkin, D.; Ramsdorf, A. [Joint Institute for Nuclear Research, Joloit-Curie 6, 141980 Dubna, Moscow Region (Russian Federation)

    2016-02-15

    An assembly for a commercial Ga{sup +} liquid metal ion source in combination with an ion transportation and focusing system, a pulse high-voltage quadrupole deflector, and a beam diagnostics system has been constructed in the framework of the iThemba LABS (Cape Town, South Africa)—JINR (Dubna, Russia) collaboration. First, results on Ga{sup +} ion beam commissioning will be presented. Outlook of further experiments for measurements of charge breeding efficiency in the electron string ion source with the use of external injection of Ga{sup +} and Au{sup +} ion beams will be reported as well.

  17. Calorimeter for pulsed energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Pearce, J.W.; Edmonds, P.H.

    1979-01-01

    A common problem in plasma physics experiments is the measurement of the energy deposited on a water-cooled plate by a pulsed energy source. Examples of this are neutral-beam-line defining plate and targets and tokamak water-cooled limiters. One method of measuring this energy is to integrate the product of the temperature rise (..delta..T) and the flow rate (F) of the coolant over the interval between the pulses. The two input parameters ..delta..T and F are derived from a differential thermopile and a turbine flow meter, respectively. A simple digital readout circuit displays the deposited energy in a light-emitting diode display. The circuit uses a commercially available, dual-slope analog-to-digital converter (ADC) in a novel configuration that multiplies ..delta..T and F directly. Calibration of the readout circuit is quick and simple, and short-term accuracies of 5% are easily obtained. Over longer periods the accuracy becomes degraded, primarily by thermal drifts in the thermopile amplifier and in the thermopile connections and the wiring. This offset must be compensated for by a simple adjustment before each experimental run. This readout circuit has been used successfully on the Impurity Study Experiment (ISX-B) neutral beam lines and is most convenient for deposited energy measurements in applications in which computerized data acquisition is not available.

  18. Under-Use of Body Energy and Over-Use of External Energy

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    2005-01-01

    by overeating and under-use of the body energy, due to increased use of mechanized and energy consuming assistance for transport and other daily tasks. This connects to the other problem, namely these countries’ excessive use of fossil fuels and other environmentally harmful forms of nature’s external energy......The world’s affluent countries, such as the EU, are facing two severe problems with long-term consequences. One problem is the epidemic-like increase in adverse health effects, which are related to the increasing wealth, primarily appearing as obesity and its associated diseases. This is caused....... This paper illuminates the options for integrated solutions to the two problems by making more use of body energy as a means to reduce the use of nature’s external energy. First is listed a human’s body energy used for various tasks and occupations, showing that a person’s use of external energy is and order...

  19. Investigation of noise sources and propagation in external gear pumps

    Science.gov (United States)

    Opperwall, Timothy J.

    Oil hydraulics is widely accepted as the best technology for transmitting power in many engineering applications due to its advantages in power density, control, layout flexibility, and efficiency. Due to these advantages, hydraulic systems are present in many different applications including construction, agriculture, aerospace, automotive, forestry, medical, and manufacturing, just to identify a few. Many of these applications involve the systems in close proximity to human operators and passengers where noise is one of the main constraints to the acceptance and spread of this technology. As a key component in power transfer, displacement machines can be major sources of noise in hydraulic systems. Thus, investigation into the sources of noise and discovering strategies to reduce noise is a key part of applying fluid power systems to a wider range of applications, as well as improving the performance of current hydraulic systems. The present research aims to leverage previous efforts and develop new models and experimental techniques in the topic of noise generation caused by hydrostatic units. This requires challenging and surpassing current accepted methods in the understanding of noise in fluid power systems. This research seeks to expand on the previous experimental and modeling efforts by directly considering the effect that system and component design changes apply on the total sound power and the sound frequency components emitted from displacement machines and the attached lines. The case of external gear pumps is taken as reference for a new model to understand the generation and transmission of noise from the sources out to the environment. The lumped parameter model HYGESim (HYdraulic GEar machine Simulator) was expanded to investigate the dynamic forces on the solid bodies caused by the pump operation and to predict interactions with the attached system. Vibration and sound radiation were then predicted using a combined finite element and boundary

  20. A comparative perspective on external technology sourcing modalities : The role of synergies

    NARCIS (Netherlands)

    Sabidussi, A.; Lokshin, B.; de Leeuw, T.; Duijsters, G.M.; Bremmers, H.; Omta, O.

    2014-01-01

    This paper assesses the impact on innovative performance of alternative external sourcing strategies. In particular, the study under discussion compared external sourcing strategies based on specialization to those based on integrating various sourcing modalities (e.g., alliances and M&As). Survey

  1. A comparative perspective on external technology sourcing modalities: The role of synergies

    NARCIS (Netherlands)

    Sabidussi, A.; Lokshin, B.; Leeuw, de T.; Duysters, G.M.; Bremmers, H.J.; Omta, S.W.F.

    2014-01-01

    This paper assesses the impact on innovative performance of alternative external sourcing strategies. In particular, the study under discussion compared external sourcing strategies based on specialization to those based on integrating various sourcing modalities (e.g., alliances and M&As).

  2. PASOTRON high-energy microwave source

    Science.gov (United States)

    Goebel, Dan M.; Schumacher, Robert W.; Butler, Jennifer M.; Hyman, Jay, Jr.; Santoru, Joseph; Watkins, Ron M.; Harvey, Robin J.; Dolezal, Franklin A.; Eisenhart, Robert L.; Schneider, Authur J.

    1992-04-01

    A unique, high-energy microwave source, called PASOTRON (Plasma-Assisted Slow-wave Oscillator), has been developed. The PASOTRON utilizes a long-pulse E-gun and plasma- filled slow-wave structure (SWS) to produce high-energy pulses from a simple, lightweight device that utilizes no externally produced magnetic fields. Long pulses are obtained from a novel E-gun that employs a low-pressure glow discharge to provide a stable, high current- density electron source. The electron accelerator consists of a high-perveance, multi-aperture array. The E-beam is operated in the ion-focused regime where the plasma filling the SWS space-charge neutralizes the beam, and the self-pinch force compresses the beamlets and increases the beam current density. A scale-model PASOTRON, operating as a backward- wave oscillator in C-band with a 100-kV E-beam, has produced output powers in the 3 to 5 MW range and pulse lengths of over 100 microsecond(s) ec, corresponding to an integrated energy per pulse of up to 500 J. The E-beam to microwave-radiation power conversion efficiency is about 20%.

  3. INTERMEDIATE-ENERGY LIGHT SOURCES

    Energy Technology Data Exchange (ETDEWEB)

    Corbett, William

    2002-11-25

    Increasingly, atomic scale information underlies scientific and technological progress in disciplines ranging from pharmaceutical development to materials synthesis to environmental remediation. While a variety of research tools are used to provide atomic scale information, synchrotron radiation has proved invaluable in this quest. The rapid growth of soft- and hard X-ray synchrotron light sources stands as stark testimony to the importance and utility of synchrotron radiation. Starting from just a handful of synchrotron light sources in the early 1970s, this burgeoning field now includes over 70 proposed, in-construction, or operating facilities in 23 countries on five continents. Along the way, synchrotron light facilities have evolved from small laboratories extracting light parasitically from storage rings designed for high-energy physics research to large, dedicated sources using the latest technology to produce extraordinarily bright photon beams. The basic layout of a multi-GeV storage ring light source employs periodic bending magnets to guide a charged particle beam around the storage ring. As the charged beam is accelerated in an arc, it produces a sweeping fan of synchrotron radiation that extends from the infrared part of the electromagnetic spectrum (<1 eV) to hard X rays (>20 keV). Quadrupole magnets keep the electrons tightly focused, and a radio-frequency acceleration system replenishes beam energy lost to radiation emission. To optimize the output radiation, a premium is placed on high current electron beams with small cross section and extreme position stability. Magnetic insertion devices are used to further enhance radiation output by a factor of 10 or more over bend magnet sources. The storage ring vacuum chamber includes exit ports to allow portions of the radiation fan to propagate down photon beam transport lines to optical systems and experimental stations. A typical storage ring features 10 or more such radiation ports. The photon beam

  4. Does External Knowledge Sourcing Enhance Market Performance? Evidence from the Korean Manufacturing Industry.

    Science.gov (United States)

    Lee, Kibaek; Yoo, Jaeheung; Choi, Munkee; Zo, Hangjung; Ciganek, Andrew P

    2016-01-01

    Firms continuously search for external knowledge that can contribute to product innovation, which may ultimately increase market performance. The relationship between external knowledge sourcing and market performance is not well-documented. The extant literature primarily examines the causal relationship between external knowledge sources and product innovation performance or to identify factors which moderates the relationship between external knowledge sourcing and product innovation. Non-technological innovations, such as organization and marketing innovations, intervene in the process of external knowledge sourcing to product innovation to market performance but has not been extensively examined. This study addresses two research questions: does external knowledge sourcing lead to market performance and how does external knowledge sourcing interact with a firm's different innovation activities to enhance market performance. This study proposes a comprehensive model to capture the causal mechanism from external knowledge sourcing to market performance. The research model was tested using survey data from manufacturing firms in South Korea and the results demonstrate a strong statistical relationship in the path of external knowledge sourcing (EKS) to product innovation performance (PIP) to market performance (MP). Organizational innovation is an antecedent to EKS while marketing innovation is a consequence of EKS, which significantly influences PIP and MP. The results imply that any potential EKS effort should also consider organizational innovations which may ultimately enhance market performance. Theoretical and practical implications are discussed as well as concluding remarks.

  5. Allothermal gasification of biomass using micron size biomass as external heat source.

    Science.gov (United States)

    Cheng, Gong; Li, Qian; Qi, Fangjie; Xiao, Bo; Liu, Shiming; Hu, Zhiquan; He, Piwen

    2012-03-01

    An allothermal biomass gasification system using biomass micron fuel (BMF) as external heat source was developed. In this system, heat supplied to gasifier was generated from combustion of BMF. Biomass feedstock was gasified with steam and then tar in the produced gas was decomposed in a catalytic bed with NiO/γ-Al(2)O(3) catalyst. Finally the production gas was employed as a substitute for civil fuel gas. An overall energy analysis of the system was also investigated. The results showed that the lower heating value of the product gas reached more than 12 MJ/Nm(3). The combusted BMF accounted for 26.8% of the total energy input. Allothermal gasification based on the substituted BMF for conventional energy was an efficient and economical technology to obtain bioenergy.

  6. Freezing of Energy of a Soliton in an External Potential

    Science.gov (United States)

    Bambusi, D.; Maspero, A.

    2016-05-01

    In this paper we study the dynamics of a soliton in the generalized NLS with a small external potential ɛV of Schwartz class. We prove that there exists an effective mechanical system describing the dynamics of the soliton and that, for any positive integer r, the energy of such a mechanical system is almost conserved up to times of order ɛ - r . In the rotational invariant case we deduce that the true orbit of the soliton remains close to the mechanical one up to times of order ɛ - r .

  7. Hybrid energy sources for embedded sensor nodes

    Science.gov (United States)

    Silva, Ramon; Farinholt, Kevin; Park, Gyuhae

    2011-04-01

    In this paper, we present a series of hybrid energy configurations that are designed to provide a robust power source for embedded sensing hardware. The proper management of energy resources is a critical component in the design of any deployed sensing network. For systems that are installed in remote or inaccessible locations, or those with an operational lifespan that exceeds traditional battery technologies, energy harvesting is an attractive alternative. Unfortunately, the dependence on a single energy source (i.e. solar) can cause potential problems when environmental conditions preclude the system from operating at peak performance. In this paper we consider the use of a hybrid energy source that extracts energy from multiple sources and uses this collective energy to power sensing hardware. The sources considered in this work include: solar, vibration, thermal gradients, and RF energy capture. Methods of increasing the efficiency, energy storage medium, target applications and the integrated use of energy harvesting sources with wireless energy transmission will be discussed.

  8. Expert opinion: Comparative analysis of the social costs of electricity generation in the context of the Renewable Energy Sources Act (EEG); Gutachten: Vergleich externer Kosten der Stromerzeugung in Bezug auf das Erneuerbare Energien Gesetz

    Energy Technology Data Exchange (ETDEWEB)

    Hohmeyer, O.

    2002-03-01

    The expert opinion for the German Federal Environmental Agency explains and discusses the results of six scenarios describing the outcome of substitution of conventional electricity generation technologies relying exclusively on fossil fuels, using as a reference case the generation of middle load power in Germany in 1998 with the then operating German power plants, as well as projections for the year 2001. One major objective of the expert opinion is to evaluate results in terms of social and other relevant costs, achieved through the use of renewable energy technologies for electricity generation since effectiveness of the German EEG, (act promoting power generation from renewable energy sources). The comparative evaluation distinctly refers to conventional and renewable generation technologies in assessing their economic and environmental impacts. The second aspect analysed is the support (and its efficiency) offered so far by the existing national policies and laws, as well as the European Directives and guidelines on promotion of renewable energy technologies. Proposals for improvement are presented. (orig./CB) [German] Im Gutachten werden sechs Szenarien fuer die substituierte konventionelle Stromerzeugung entwickelt, die als Basis sowohl die durchschnittliche Stromerzeugung unter Verwendung fossiler Brennstoffe als auch die Erzeugung von Mittellaststrom fuer die Jahre 1998 und 2010 betrachten und anhand entsprechender Referenzsysteme und Berechnungen die Ergebnisse liefern, die die Frage nach allen relevanten, seit Einfuehrung des EEG bis heute, durch den Einsatz erneuerbarer Energietraeger substituierten Kosten und umweltrelevanten Verbesserungen beantworten und detailliert schildern. In der Zusammenfassung werden vor allem die Ergebnisse von Vergleichen bezogen auf verschiedene erneuerbare und konventioneller Energietraeger fuer das Mittellastszenario auf der Basis des fuer 1998 dokumentierten deutschen Kraftwerksparks vorgestellt. Ferner werden die

  9. The dual role of external technology sourcing in technological exploration

    DEFF Research Database (Denmark)

    Vanhaverbeke, Wim; Li-Ying, Jason; van de Vrande, Vareska

    2013-01-01

    We refine the concept of boundary-spanning exploration, by making a distinction between explorative learning from partners and from non-partners (Partners are organizations with whom a focal firm has some kind of external venturing relations, i.e. technological alliances, corporate venturing capi...

  10. Potential of renewable and alternative energy sources

    Science.gov (United States)

    Konovalov, V.; Pogharnitskaya, O.; Rostovshchikova, A.; Matveenko, I.

    2015-11-01

    The article deals with application potential of clean alternative renewable energy sources. By means of system analysis the forecast for consumption of electrical energy in Tomsk Oblast as well as main energy sources of existing energy system have been studied up to 2018. Engineering potential of renewable and alternative energy sources is evaluated. Besides, ranking in the order of their efficiency descending is performed. It is concluded that Tomsk Oblast has high potential of alternative and renewable energy sources, among which the most promising development perspective is implementation of gasification stations to save fuel consumed by diesel power stations as well as building wind-power plants.

  11. GLOBAL ENERGY CRISIS AND RENEWABLE ENERGY SOURCES

    OpenAIRE

    Katarzyna Piechota

    2013-01-01

    The sudden development of the mankind at the turn of the 19th and 20th centuries brought along the growth in importance of exploiting the energy of different type. When uninterruptedly a demand for the energy is growing, and abilities of increasing the supply for her are limited, we can deal with the occurrence of an energy crisis. The article is moving the subject matter of an global energy crisis. A definition of an energy crisis, his genesis and effects were included in it for world econom...

  12. Perturbative neutrino pair creation by an external source

    CERN Document Server

    Koers, H

    2004-01-01

    We consider the rate of fermion-antifermion pair creation by an external field. We derive a rate formula that is valid for a coupling with arbitrary vector and axial vector components to first order in perturbation theory. This is then applied to study the creation of neutrinos by nuclear matter, a problem with astrophysical relevance. We present an estimate for the creation rate per unit volume, compare this to previous results and comment on the role of the neutrino mass.

  13. High Energy Sources Observed with OMC

    CERN Document Server

    Risquez, D; Mas-Hesse, J M; Kuulkers, E

    2008-01-01

    The INTEGRAL Optical Monitoring Camera, OMC, has detected many high energy sources. We have obtained V-band fluxes and light curves for their counterparts. In the cases of previously unknown counterparts, we have searched for characteristic variations in optical sources around the high-energy target position. Results about the Galactic Bulge Monitoring, INTEGRAL Gamma-Ray sources (IGR), and other high energy sources are presented.

  14. Relativistic Killingbeck energy states under external magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Eshghi, M. [Islamic Azad University, Researchers and Elite Club, Central Tehran Branch, Tehran (Iran, Islamic Republic of); Mehraban, H. [Semnan University, Faculty of Physics, Semnan (Iran, Islamic Republic of); Ikhdair, S.M. [An-Najah National University, Department of Physics, Faculty of Science, Nablus, West Bank, Palestine (Country Unknown); Near East University, Department of Electrical Engineering, Nicosia, Northern Cyprus (Turkey)

    2016-07-15

    We address the behavior of the Dirac equation with the Killingbeck radial potential including the external magnetic and Aharonov-Bohm (AB) flux fields. The spin and pseudo-spin symmetries are considered. The correct bound state spectra and their corresponding wave functions are obtained. We seek such a solution using the biconfluent Heun's differential equation method. Further, we give some of our results at the end of this study. Our final results can be reduced to their non-relativistic forms by simply using some appropriate transformations. The spectra, in the spin and pseudo-spin symmetries, are very similar with a slight difference in energy spacing between different states. (orig.)

  15. Corporate risk and external sourcing: A study of Scandinavian multinational firms

    DEFF Research Database (Denmark)

    Aabo, Tom; Pantzalis, Christos; Sørensen, Helle

    2016-01-01

    External sourcing from foreign suppliers is an important aspect of the firm’s internationalization. However, data on such sourcing is available from neither databases nor annual reports. Thus, the corporate risk implications of such sourcing have not been studied previously. We obtain the necessa...... to offsetting cash flows). Our results are statistically significant, are economically meaningful, and have important policy implications.......External sourcing from foreign suppliers is an important aspect of the firm’s internationalization. However, data on such sourcing is available from neither databases nor annual reports. Thus, the corporate risk implications of such sourcing have not been studied previously. We obtain the necessary...

  16. MD 400: LHC emittance growth in presence of an external source of noise during collision

    CERN Document Server

    Barranco Garcia, Javier; Pieloni, Tatiana; Tambasco, Claudia; Trad, Georges; Valuch, Daniel; Betz, Michael; Wendt, Manfred; Pojer, Mirko; Solfaroli Camillocci, Matteo; Salvachua Ferrando, Belen Maria; Fuchsberger, Kajetan; Albert, Markus; Qiang, Ji; CERN. Geneva. ATS Department

    2016-01-01

    The interplay between head-on beam-beam interaction and external sources of noise can be a significant source of emittance growth, especially when considering large beam-beam tune shifts as for the HL-LHC upgrade project. In this experiment the emittance growth of colliding bunches with different brightness and therefore different beam-beam parameters in the presence of an external white noise source with different amplitudes is measured for different gains of the transverse feedback.

  17. Under-use of body energy and over-use of external energy

    Energy Technology Data Exchange (ETDEWEB)

    Norgard, Jorgen Stig [Technical Univ. of Denmark, Lyngby (Denmark). Dept. of Civil Engineering

    2005-07-01

    The world's affluent countries, such as the EU, are facing two severe problems with long-term consequences. One problem is the epidemic-like increase in adverse health effects, which are related to the increasing wealth, primarily appearing as obesity and its associated diseases. This is caused by overeating and under-use of the body energy, due to increased use of mechanized and energy consuming assistance for transport and other daily tasks. This connects to the other problem, namely these countries' excessive use of fossil fuels and other environmentally harmful forms of nature's external energy. This paper illuminates the options for integrated solutions to the two problems by making more use of body energy as a means to reduce the use of nature's external energy. First is listed a human's body energy used for various tasks and occupations, showing that a person's use of external energy is an order of magnitude higher, which can be expressed by the scores of 'energy slaves' each citizen utilizes. An extra health driven physical effort by humans seems to have negligible direct impact on energy consumption. The paper will, however, indicate examples of significant indirect savings of external energy, achieved by healthy extra human efforts. Also, the paper will suggest ways to integrate energy saving policies with health policies for organizing and designing cities and houses to be 'healthy inconvenient', encouraging or pushing people to use their body in their daily doings. This is an enormous challenge to the conventional way of thinking among architects, engineers, planners, as well as individuals in general.

  18. The Role of External Knowledge Sources and Organizational Design in the Process of Opportunity Exploitation

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Lyngsie, Jacob; Zahra, Shaker A.

    2013-01-01

    Research highlights the role of external knowledge sources in the recognition of strategic opportunities but is less forthcoming with respect to the role of such sources during the process of exploiting or realizing opportunities. We build on the knowledge-based view to propose that realizing...... opportunities often involves significant interactions with external knowledge sources. Organizational design can facilitate a firm's interactions with these sources, while achieving coordination among organizational members engaged in opportunity exploitation. Our analysis of a double-respondent survey...... involving 536 Danish firms shows that the use of external knowledge sources is positively associated with opportunity exploitation, but the strength of this association is significantly influenced by organizational designs that enable the firm to access external knowledge during the process of exploiting...

  19. The Role of External Knowledge Sources and Organizational Design in the Process of Opportunity Exploitation

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Lyngsie, Jacob; A. Zahra, Shaker

    Research highlights the role of external knowledge sources in the recognition of strategic opportunities, but is less forthcoming with respect to the role of such sources during the process of exploiting or realizing opportunities. We build on the knowledge-based view to propose that realizing...... opportunities often involves significant interactions with external knowledge sources. Organizational design can facilitate a firm’s interactions with these sources, while achieving coordination among organizational members engaged in opportunity exploitation. Our analysis of a double-respondent survey...... involving 536 Danish firms shows that the use of external knowledge sources is positively associated with opportunity exploitation, but the strength of this association is significantly influenced by organizational designs that enable the firm to access external knowledge during the process of exploiting...

  20. External knowledge sourcing in the Spanish archaeological sector: Mapping the emergent stage of a business activity

    Directory of Open Access Journals (Sweden)

    Eva Parga-Dans

    2017-03-01

    Full Text Available Recent studies of innovation highlight the importance of external knowledge sourcing. Existing empirical works are based on national surveys and specific industries. The present study contributes to the analysis of strategies for sourcing external knowledge, based on a specific case study and moment in time: the Spanish archaeological sector and its emergence as a new business activity. Our results show that external knowledge sourcing involves diverse mechanisms, agents and two main strategies: cooperation and knowledge acquisition. In an expanding knowledge-based sector emerging in an uncertain context and whose sources of knowledge are scattered, innovation strategy should focus on the search for external knowledge –cooperation and acquisition strategies-, rather than on internal sources.

  1. Under-Use of Body Energy and Over-Use of External Energy

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    2005-01-01

    of magnitude higher, which can be expressed by the scores of “energy slaves” each citizen utilizes. An extra health driven physical effort by humans seems to have negligible direct impact on energy consumption. The paper will, however, indicate examples of significant indirect savings of external energy......, achieved by healthy extra human efforts. Also, the paper will suggest ways to integrate energy saving policies with health policies for organizing and designing cities and houses to be “healthy inconvenient”, encouraging or pushing people to use their body in their daily doings. This is an enormous...

  2. The Benefits of Internalizing Air Quality and Greenhouse Gas Externalities in the US Energy System

    Science.gov (United States)

    Brown, Kristen E.

    The emission of pollutants from energy use has effects on both local air quality and the global climate, but the price of energy does not reflect these externalities. This study aims to analyze the effect that internalizing these externalities in the cost of energy would have on the US energy system, emissions, and human health. In this study, we model different policy scenarios in which fees are added to emissions related to generation and use of energy. The fees are based on values of damages estimated in the literature and are applied to upstream and combustion emissions related to electricity generation, industrial energy use, transportation energy use, residential energy use, and commercial energy use. The energy sources and emissions are modeled through 2055 in five-year time steps. The emissions in 2045 are incorporated into a continental-scale atmospheric chemistry and transport model, CMAQ, to determine the change in air quality due to different emissions reduction scenarios. A benefit analysis tool, BenMAP, is used with the air quality results to determine the monetary benefit of emissions reductions related to the improved air quality. We apply fees to emissions associated with health impacts, climate change, and a combination of both. We find that the fees we consider lead to reductions in targeted emissions as well as co-reducing non-targeted emissions. For fees on the electric sector alone, health impacting pollutant (HIP) emissions reductions are achieved mainly through control devices while Greenhouse Gas (GHG) fees are addressed through changes in generation technologies. When sector specific fees are added, reductions come mainly from the industrial and electricity generation sectors, and are achieved through a mix of energy efficiency, increased use of renewables, and control devices. Air quality is improved in almost all areas of the country with fees, including when only GHG fees are applied. Air quality tends to improve more in regions with

  3. The Role of External Knowledge Sources and Organizational Design in the Process of Opportunity Exploitation

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Lyngsie, Jacob; A. Zahra, Shaker

    involving 536 Danish firms shows that the use of external knowledge sources is positively associated with opportunity exploitation, but the strength of this association is significantly influenced by organizational designs that enable the firm to access external knowledge during the process of exploiting...

  4. Life cycle assessment of renewable energy sources

    CERN Document Server

    Singh, Anoop; Olsen, Stig Irving

    2013-01-01

    Governments are setting challenging targets to increase the production of energy and transport fuel from sustainable sources. The emphasis is increasingly on renewable sources including wind, solar, geothermal, biomass based biofuel, photovoltaics or energy recovery from waste. What are the environmental consequences of adopting these other sources? How do these various sources compare to each other? Life Cycle Assessment of Renewable Energy Sources tries to answer these questions based on the universally adopted method of Life Cycle Assessment (LCA). This book introduces the concept and impor

  5. Corporate risk and external sourcing: A study of Scandinavian multinational firms

    DEFF Research Database (Denmark)

    Aabo, Tom; Pantzalis, Christos; Sørensen, Helle

    2016-01-01

    External sourcing from foreign suppliers is an important aspect of the firm’s internationalization. However, data on such sourcing is available from neither databases nor annual reports. Thus, the corporate risk implications of such sourcing have not been studied previously. We obtain the necessary...... to offsetting cash flows). Our results are statistically significant, are economically meaningful, and have important policy implications....

  6. Energy sources for the future

    Energy Technology Data Exchange (ETDEWEB)

    Duggan, J.L.; Cloutier, R.J. (eds.)

    1977-04-01

    The symposium program was designed for college faculty members who are teaching or plan to teach energy courses at their educational institutions. Lectures were presented on socio-economic aspects of energy development, fusion reactors, solar energy, coal-fired power plants, nuclear power, radioactive waste disposal, and radiation hazards. A separate abstract was prepared for each of 16 of the 18 papers presented; two papers were processed earlier: Residential Energy Use Alternatives to the Year 2000, by Eric Hurst (EAPA 2:257; ERA 1:25978) and The Long-Term Prospects for Solar Energy, by W. G. Pollard (EAPA 3:1008). Fourteen of the papers are included in Energy Abstracts for Policy Analysis. (EAPA).

  7. Cyanate as energy source for nitrifiers

    DEFF Research Database (Denmark)

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico

    2015-01-01

    recognized energy sources that promote the aerobic growth of ammonia-oxidizing bacteria and archaea. Here we report the aerobic growth of a pure culture of the ammonia-oxidizing thaumarchaeote Nitrososphaera gargensis1 using cyanate as the sole source of energy and reductant; to our knowledge, the first...

  8. Prices and costs of energy sources; Les prix et les couts des sources d'energie

    Energy Technology Data Exchange (ETDEWEB)

    Martin-Amouroux, J.M. [Institut d' Economie et de Politique de l' Energie (CNRS- UPMF), 38 - Grenoble (France)

    2005-07-01

    An evaluation of the complete social energy cost should result from the sum of the production marginal cost, of the external marginal cost and of the marginal cost of substitution of non-renewable energy sources. This last parameter is difficult to estimate because of theoretical and methodological obstacles. The two others are evaluated for different energy sources, in the present day situation, and in the perspective of a probable evolution. Today, fossil fuels have the lowest internal costs whatever their use. Thus, in 'business as usual' energy scenarios, fossil fuels represent more than 80% of the energy supply at the 2050 prospects. However, several uncertainties can affect the future evolution of these costs, some are of geopolitical origin (political fragility of some exporting countries), and some are of environmental origin (internalized costs of CO{sub 2} emissions). Finally, the depletion of some resources should be anticipated. (J.S.)

  9. Externalities of energy use, analyzed for shipping and electricity generation

    Science.gov (United States)

    Thomson, Heather

    Energy use is central to the modern lifestyle, but producing this energy often comes at an environmental cost. The three studies in this paper look at the tradeoffs involved in energy production. The first looks at transitioning marine vessels to natural gas from current distillate fuels. While natural gas will reduce local air pollutants, such as sulfur oxides and particulate matter, the implications for greenhouse gases depend on how the natural gas is extracted, processed, distributed, and used. Applying a "technology warming potential" (TWP) approach, natural gas as a marine fuel achieves climate parity within 30 years for diesel ignited engines, though it could take up to 190 years to reach climate parity with conventional fuels in a spark ignited engine. Movement towards natural gas as a marine fuel continues to progress, and conditions exist in some regions to make a near-term transition to natural gas feasible. The second study looks at externalities associated with electricity generation. The impact on the surrounding community is one concern when siting new electricity generating facilities. A survey was conducted of residents living near an industrial scale wind turbine and a coal-fired power plant to determine their visual and auditory effects on the residents. Results concluded that respondents living near the wind turbine were in favor of the facility. They were willing to pay an average of 2.56 a month to keep the turbine in its current location. Respondents living near the coal plant were opposed to the facility. They were willing to spend 1.82 a month to have the facility removed. The third study presents a cost effectiveness analysis of three of the main fuels used for electricity generation, namely coal, natural gas, and wind. This analysis adds social costs to the private costs traditionally utilized by investors making decisions. It utilizes previous research on visual and auditory amenity and disamenity values as well as recent published

  10. Alternatives sources of energy in the Czech energy mix

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Lisy; Marek, Balas; Zdenek, Skala

    2010-09-15

    The paper features a basic outline of the situation in the energy sector of the Czech Republic. It brings information about the current state of the country's energy mix and indicative targets of the State Energy Policy. Though coal and nuclear energy will remain the country's energy staples, great stress is also put on the growth of share of renewable and alternative energy sources. Out of these, the greatest potential in the Czech Republic is that of biomass and waste. To make the use of these sources cost-effective, it is necessary to put stress on heat and power cogeneration.

  11. Exploiting the energy source of the stars

    DEFF Research Database (Denmark)

    Rasmussen, Jesper; Jensen, Thomas; Jessen, Martin

    With increasing energy demands and a limited supply of fossil fuels, the need for efficient, clean, and sustainable energy sources grows ever more pressing. Nuclear fusion – the process from which stars like the Sun derive their energy – holds the potential to help address this challenge. To mimic...

  12. Energy technology sources, systems and frontier conversion

    CERN Document Server

    Ohta, Tokio

    1994-01-01

    This book provides a concise and technical overview of energy technology: the sources of energy, energy systems and frontier conversion. As well as serving as a basic reference book for professional scientists and students of energy, it is intended for scientists and policy makers in other disciplines (including practising engineers, biologists, physicists, economists and managers in energy related industries) who need an up-to-date and authoritative guide to the field of energy technology.Energy systems and their elemental technologies are introduced and evaluated from the view point

  13. External and internal sources which inhibit the nitrification process in wastewater treatment plants

    DEFF Research Database (Denmark)

    Sinkjær, O.; Bøgebjerg, P.; Grüttner, Henrik

    1996-01-01

    monitoring the influent to the Lynetten WWTP and the Damhusaen WWTP and the catchment areas have revealed that discharges from industries are to be considered the most important external sources of inhibition. The load from the external sources has decreased during the investigation period, and since 1993...... the nitrification capacity monitored at the pilot plants has been in agreement with the design basis. The recycling of the scrubber water from the cleaning of sludge incineration flue gas was found to be an important internal source of inhibition at the Lynetten WWTP. Investigations show that it is possible...

  14. Renewable energy sources 1991, part 2

    Science.gov (United States)

    Michalicka, L.

    1991-12-01

    The International Conference on Renewable Energy Sources was held in Prague on 1-4 Jul. 1991. Part 2 of the proceedings is devoted to the use of the energy of wind, biogas, and small hydroelectric sources. The publication contains 14 contributions, of which 3 were inputted in INIS. Topics covered include: a wind power plant in Sweden and its environmental impacts, economic aspects of the introduction of alternative energy sources in Czechoslovakia, and the efficiency of application of a Fresnel lens-based solar collector.

  15. Impact of external sources of infection on the dynamics of bovine tuberculosis in modelled badger populations

    Directory of Open Access Journals (Sweden)

    Hardstaff Joanne L

    2012-06-01

    Full Text Available Abstract Background The persistence of bovine TB (bTB in various countries throughout the world is enhanced by the existence of wildlife hosts for the infection. In Britain and Ireland, the principal wildlife host for bTB is the badger (Meles meles. The objective of our study was to examine the dynamics of bTB in badgers in relation to both badger-derived infection from within the population and externally-derived, trickle-type, infection, such as could occur from other species or environmental sources, using a spatial stochastic simulation model. Results The presence of external sources of infection can increase mean prevalence and reduce the threshold group size for disease persistence. Above the threshold equilibrium group size of 6–8 individuals predicted by the model for bTB persistence in badgers based on internal infection alone, external sources of infection have relatively little impact on the persistence or level of disease. However, within a critical range of group sizes just below this threshold level, external infection becomes much more important in determining disease dynamics. Within this critical range, external infection increases the ratio of intra- to inter-group infections due to the greater probability of external infections entering fully-susceptible groups. The effect is to enable bTB persistence and increase bTB prevalence in badger populations which would not be able to maintain bTB based on internal infection alone. Conclusions External sources of bTB infection can contribute to the persistence of bTB in badger populations. In high-density badger populations, internal badger-derived infections occur at a sufficient rate that the additional effect of external sources in exacerbating disease is minimal. However, in lower-density populations, external sources of infection are much more important in enhancing bTB prevalence and persistence. In such circumstances, it is particularly important that control strategies to

  16. Fusion as a future energy source

    Science.gov (United States)

    Ward, D. J.

    2016-11-01

    Fusion remains the main source of energy generation in the Universe and is indirectly the origin of nearly all terrestrial energy (including fossil fuels) but it is the only fundamental energy source not used directly on Earth. Here we look at the characteristics of Earth-based fusion power, how it might contribute to future energy supply and what that tells us about the future direction of the R&D programme. The focus here is Magnetic Confinement Fusion although many of the points apply equally to inertial confinement fusion.

  17. CARDOON, RENEWABLE SOURCE OF ENERGY

    Directory of Open Access Journals (Sweden)

    Cecilia NEAGU

    2013-01-01

    Full Text Available Cardoon (Cynara cardunculus is a herbaceous perennial plant in the vegetable, artichoke, wild or garden, which belongs to the Compositae family (Asteraceae Compositae-and more precisely Cynara species and is grown specifically for the production of biomass (solid bio fuel as a pellet, or solid and liquid bio fuel, bio diesel. In this paper I have tried to highlight the profitability and economic efficiency of growing of this plant. Production capacity exceeding 2 tonnes dry matter/1000mp. The yield depends on climatic conditions, adequate soil moisture, soil nutrients, and range from 1 to 3 t/1000mp, dry. Cardoon seed contains on average 24% oil (category: 19-32%, with the same qualities as the sunflower. Quantity of seed production to 480 kgs/1000mp, while ordinary productivities range 70 to 330 kg/1000mp, always depending on the total biomass production. Growing cardooncan replace traditional crops, partly by ensuring a good profit for the farmer (double the wheat and rapeseed and bio fuel production with high energy content. Solid bio fuels (pellets, briquettes, artichokes, etc. can reach the enduser, at prices up to 30-40% lower than the price of oil. Because cardoon is a perennial plant which grows once every 10-12 years, and preparing the ground and sowing it will be carried out at intervals so large (this plant is harvested annually,it is remarkable cost reduction efficiency of growing this plant.In addition to the obvious environmental advantages by producing green energy, growing artichokes garden preserves the soil covered for the most part of the year, thereby minimizing the risk of soil erosion and limit the pollution of soil and groundwater with agrochemical products, especially in areas with intensive agriculture, because it does not require additional fertilization and/or with the use of chemical fertilizers or pesticides.

  18. Optical arc sensor using energy harvesting power source

    Science.gov (United States)

    Choi, Kyoo Nam; Rho, Hee Hyuk

    2016-06-01

    Wireless sensors without external power supply gained considerable attention due to convenience both in installation and operation. Optical arc detecting sensor equipping with self sustaining power supply using energy harvesting method was investigated. Continuous energy harvesting method was attempted using thermoelectric generator to supply standby power in micro ampere scale and operating power in mA scale. Peltier module with heat-sink was used for high efficiency electricity generator. Optical arc detecting sensor with hybrid filter showed insensitivity to fluorescent and incandescent lamps under simulated distribution panel condition. Signal processing using integrating function showed selective arc discharge detection capability to different arc energy levels, with a resolution below 17J energy difference, unaffected by bursting arc waveform. The sensor showed possibility for application to arc discharge detecting sensor in power distribution panel. Also experiment with proposed continuous energy harvesting method using thermoelectric power showed possibility as a self sustainable power source of remote sensor.

  19. Optical arc sensor using energy harvesting power source

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Kyoo Nam, E-mail: knchoi@inu.ac.kr; Rho, Hee Hyuk, E-mail: rdoubleh0902@inu.ac.kr [Dept. of Information and Telecommunication Engineering Incheon National University Incheon 22012 (Korea, Republic of)

    2016-06-03

    Wireless sensors without external power supply gained considerable attention due to convenience both in installation and operation. Optical arc detecting sensor equipping with self sustaining power supply using energy harvesting method was investigated. Continuous energy harvesting method was attempted using thermoelectric generator to supply standby power in micro ampere scale and operating power in mA scale. Peltier module with heat-sink was used for high efficiency electricity generator. Optical arc detecting sensor with hybrid filter showed insensitivity to fluorescent and incandescent lamps under simulated distribution panel condition. Signal processing using integrating function showed selective arc discharge detection capability to different arc energy levels, with a resolution below 17 J energy difference, unaffected by bursting arc waveform. The sensor showed possibility for application to arc discharge detecting sensor in power distribution panel. Also experiment with proposed continuous energy harvesting method using thermoelectric power showed possibility as a self sustainable power source of remote sensor.

  20. 75 FR 56021 - Energy Conservation Standards for Battery Chargers and External Power Supplies: Public Meeting...

    Science.gov (United States)

    2010-09-15

    ..., and preliminary results. II. History of Standards Rulemaking for Battery Chargers and External Power... Part 430 RIN 1904-AB57 Energy Conservation Standards for Battery Chargers and External Power Supplies... establishing energy conservation standards for battery chargers (BCs) and non-Class A EPSs; the...

  1. THE SEARCH FOR ALTERNATIVE ENERGY SOURCES:

    African Journals Online (AJOL)

    User

    Department of Crop Science and Technology. Federal University of ... source. Key words: Biodiesel, Alternative energy, Oil seeds, Jatropha, Moringa. ... Among the biofuel crops grown in Europe and the US, biodiesel is usually measured to be ...

  2. High-Energy Compton Scattering Light Sources

    CERN Document Server

    Hartemann, Fred V; Barty, C; Crane, John; Gibson, David J; Hartouni, E P; Tremaine, Aaron M

    2005-01-01

    No monochromatic, high-brightness, tunable light sources currently exist above 100 keV. Important applications that would benefit from such new hard x-ray sources include: nuclear resonance fluorescence spectroscopy, time-resolved positron annihilation spectroscopy, and MeV flash radiography. The peak brightness of Compton scattering light sources is derived for head-on collisions and found to scale with the electron beam brightness and the drive laser pulse energy. This gamma 2

  3. High Energy Sources Monitored with OMC

    CERN Document Server

    Risquez, D; Caballero-Garcia, M D; Alfonso-Garzon, J; Mas-Hesse, J M

    2008-01-01

    The Optical Monitoring Camera on-board INTEGRAL (OMC) provides Johnson V band photometry of any potentially variable source within its field of view. Taking advantage of the INTEGRAL capabilities allowing the simultaneous observation of different kind of objects in the optical, X and gamma rays bands, we have performed a study of the optical counterparts of different high-energy sources. Up to now, OMC has detected the optical counterpart for more than 100 sources from the High Energy Catalog (Ebisawa et al., 2003). The photometrically calibrated light curves produced by OMC can be accessed through our web portal at: http://sdc.laeff.inta.es/omc

  4. A geography of moral hazard: sources and sinks of motor-vehicle commuting externalities.

    Science.gov (United States)

    Yiannakoulias, Niko; Bland, Widmer; Scott, Darren M

    2014-09-01

    Motor-vehicles are responsible for harms to health that are not directly experienced by individual drivers - such as air pollution and risk of injury to pedestrians. In addition to their direct effects on health, these harms also represent a moral hazard since drivers are not required to consider their effects as part of their decision to drive. We describe an approach for estimating sources of motor-vehicle commuter externalities as a means of understanding the geography of moral hazard, and in particular, the spatial displacement of negative health externalities associated with motor-vehicle commuting. This approach models motor-vehicle commuter traffic flow by trip origin for small geographic areas within the City of Toronto, Ontario. We find that most health-related externalities associated with motor-vehicle commuters are not locally generated, with a large share coming from outside Toronto. Low income is associated with externalities originating outside the municipal boundary, but not with locally sourced externalities. We discuss the impact of geographical moral hazard on the agency of citizens as well as policy options aimed at addressing motor-vehicle externalities.

  5. Multicusp ion source with external RF antenna for production of H- ions

    Science.gov (United States)

    Kalvas, T.; Hahto, S. K.; Vainionpää, J. H.; Leung, K. N.; Wilde, S. B.; Mandrillon, P.

    2007-08-01

    A multicusp ion source with modular design was developed at LBNL for production of H- ions. The source consists of a front plate, two multicusp front chambers, a quartz flange with external 3-loop RF antenna and a rear multicusp chamber. The source has LaB6 sputtering target at the rear chamber to lower the work function of the surfaces by coating them with LaB6 and an external cesium oven on the front plate. The front plate also has an integrated collar and filter magnets to cool plasma near the extraction. The collar also enables the use of cesium and LaB6 surface effects. The rear chamber is equipped with three vacuum feed-throughs for operation with two gases and a pressure measurement. Current density of over 10 mA/cm2 of H- has been measured with e/I- ratio being ˜100 when the source was operated with only 1000 W of cw RF power. Negative ion production was enhanced using cesium, Xe gas mixing and LaB6 deposition to the source surfaces. When the front plate with filter magnets is removed, the source produces large amounts of H+. Current density of 110 mA/cm2 with 1800 W RF power at 2.3 Pa source pressure was measured with over 90 % atomic species. A long operation lifetime is excepted as the external RF antenna is not exposed to plasma.

  6. Fusion energy - an abundant energy source for the future

    DEFF Research Database (Denmark)

    this goal, mankind will have a sustainable base load energy source with abundant resources, having no CO2 release, and with no longlived radioactive waste. This presentation will describe the basics of fusion energy production and the status and future prospects of the research. Considerations...

  7. Modeling of renewable hybrid energy sources

    Directory of Open Access Journals (Sweden)

    Dumitru Cristian Dragos

    2009-12-01

    Full Text Available Recent developments and trends in the electric power consumption indicate an increasing use of renewable energy. Renewable energy technologies offer the promise of clean, abundant energy gathered from self-renewing resources such as the sun, wind, earth and plants. Virtually all regions of the world have renewable resources of one type or another. By this point of view studies on renewable energies focuses more and more attention. The present paper intends to present different mathematical models related to different types of renewable energy sources such as: solar energy and wind energy. It is also presented the validation and adaptation of such models to hybrid systems working in geographical and meteorological conditions specific to central part of Transylvania region. The conclusions based on validation of such models are also shown.

  8. The Role of External Sources of Information in Children's Evaluative Food Categories

    Science.gov (United States)

    Nguyen, Simone P.

    2012-01-01

    Evaluative food categories are value-laden assessments, which reflect the healthfulness and palatability of foods (e.g. healthy/unhealthy, yummy/yucky). In a series of three studies, this research examines how 3- to 4-year-old children (N?=?147) form evaluative food categories based on input from external sources of information. The results…

  9. The Role of External Sources of Information in Children's Evaluative Food Categories

    Science.gov (United States)

    Nguyen, Simone P.

    2012-01-01

    Evaluative food categories are value-laden assessments, which reflect the healthfulness and palatability of foods (e.g. healthy/unhealthy, yummy/yucky). In a series of three studies, this research examines how 3- to 4-year-old children (N?=?147) form evaluative food categories based on input from external sources of information. The results…

  10. Applicability of a desiccant dew-point cooling system independent of external water sources

    DEFF Research Database (Denmark)

    Bellemo, Lorenzo; Elmegaard, Brian; Kærn, Martin Ryhl

    2015-01-01

    The applicability of a technical solution for making desiccant cooling systems independent of external water sources is investigated. Water is produced by condensing the desorbed water vapour in a closed regeneration circuit. Desorbed water recovery is applied to a desiccant dew-point cooling...

  11. The design of high power, external antennas for radio frequency multicusp ion sources

    Science.gov (United States)

    Welton, R. F.; Stockli, M. P.; Roseberry, R. T.; Kang, Y.; Keller, R.

    2004-05-01

    The ion source for the Spallation Neutron Source (SNS) is a radio-frequency, multicusp source designed to deliver H- beam pulses of 45 mA to the SNS accelerator, with a pulse length of 1 ms and a repetition rate of 60 Hz. In order to achieve this performance the source must operate with both high peak rf power, ˜45 kW, and high average rf power, ˜3 kW, over an operational run period of 3 weeks. The most critical source component in this respect is the plasma-immersed, porcelain coated rf antenna which can be susceptible to damage during high power operation. The DESY group has developed an external antenna configuration utilizing an Al2O3 plasma chamber which has demonstrated a very long operational period exceeding 25 000 h. Their source operates with peak rf powers comparable to the SNS source but with greatly reduced average rf powers, ˜50 W. In order to explore the applicability of this external antenna concept to high average power ion sources like the SNS source, we have performed thermal, mechanical, and electromagnetic analyses of the Al2O3 plasma chamber. This article discusses the final design which has resulted from these studies as well as estimates of the power limitations of such devices.

  12. China Experimental Fast Reactor(CEFR)——Criterion of Criticality for Reactor With External Neutron Source

    Institute of Scientific and Technical Information of China (English)

    ZHAOYu-sen

    2003-01-01

    There is a neutron source with 109 s-1 neutrons in core of CEFR during start up test and operation of CEFR. For judging the criticality of reactor with external neutron source and near criticality, it is important that the neutron level changes in core with time must be understood after introducing positive reactivity to core with external neutron source.

  13. The influence of external source intensity in accelerator/target/blanket system on conversion ratio and fuel cycle

    Science.gov (United States)

    Kochurov, Boris P.

    1995-09-01

    The analysis of neutron balance relation for a subcritical system with external source shows that a high ratio of neutron utilization (conversion ratio, breeding ratio) much exceeding similar values for nuclear reactors (both thermal or fast spectrum) is reachable in accelerator/target/blanket system with high external neutron source intensity. An accelerator/target/blanket systems with thermal power in blanket about 1850 Mwt and operating during 30 years have been investigated. Continual feed up by plutonium (fissile material) and Tc-99 (transmuted material) was assumed. Accelerator beam intensity differed 6.3 times (16 mA-Case 1, and 100 mA-Case 2). Conversion ratio (CR) was defined as the ratio of Tc-99 nuclei transmuted to the number of Pu nuclei consumed. The results for two cases are as follows: Case 1Case 2CR 0.77 1.66N(LWR) 8.6 19.1Power MWt(el) 512 225 where N(LWR)-number of LWRs(3000 MWt(th)) from which yearly discharge of Tc-99 is transmuted during 30 years. High value of conversion ratio considerably exceeding 1 (CR=1.66) was obtained in the system with high source intensity as compared with low source system (CR=0.77). Net output of electric power of high source intensity system is about twice lower due to consumption of electric power for accelerator feed up. The loss of energy for Tc-99 transmutation is estimated as 40 Mev(el)/nuclei. Yet high conversion ratio (or breeding ratio) achievable in electronuclear installations with high intensity of external source can effectively be used to close fuel cycle (including incineration of wastes) or to develop growing nuclear power production system.

  14. Open Source Energy Simulation for Elementary School

    CERN Document Server

    Lye, Sze Yee

    2012-01-01

    With the interactivity and multiple representation features, computer simulations lend itself to the guided inquiry learning. However, these simulations are usually designed for post-elementary students. Thus, the aim of this study is to investigate how the use of guided inquiry approach with customized energy simulation can improve students' understanding of this topic. In this ongoing research, the case study is adopted. In the first phase of the study, we have modified open source energy simulation based on principles for reducing extraneous processing, existing energy simulation and guided inquiry approach. The modified simulation is sent to teachers for evaluation and the feedback is encouraging. In the next phase of the study, the guided inquiry lesson package involving the energy simulation would be designed and deployed in an elementary classroom. Multiple data sources would be collected to seek a deeper understanding on how this learning package can possibly impact students' understanding of the phys...

  15. Some Simple Arguments about Cost Externalization and its Relevance to the Price of Fusion Energy

    Energy Technology Data Exchange (ETDEWEB)

    Budny, R.; Winfree, R.

    1999-09-27

    The primary goal of fusion energy research is to develop a source of energy that is less harmful to the environment than are the present sources. A concern often expressed by critics of fusion research is that fusion energy will never be economically competitive with fossil fuels, which in 1997 provided 75% of the world's energy. And in fact, studies of projected fusion electricity generation generally project fusion costs to be higher than those of conventional methods. Yet it is widely agreed that the environmental costs of fossil fuel use are high. Because these costs aren't included in the market price, and furthermore because many governments subsidize fossil fuel production, fossil fuels seem less expensive than they really are. Here we review some simple arguments about cost externalization which provide a useful background for discussion of energy prices. The collectively self-destructive behavior that is the root of many environmental problems, including fossil fuel use, was termed ''the tragedy of the commons'' by the biologist G. Hardin. Hardin's metaphor is that of a grazing commons that is open to all. Each herdsman, in deciding whether to add a cow to his herd, compares the benefit of doing so, which accrues to him alone, to the cost, which is shared by all the herdsmen using the commons, and therefore adds his cow. In this way individually rational behavior leads to the collective destruction of the shared resource. As Hardin pointed out, pollution is one kind of tragedy of the commons. CO{sub 2} emissions and global warming are in this sense classic tragedies.

  16. Forest biomass as an energy source

    Science.gov (United States)

    P.E. Laks; R.W. Hemingway; A. Conner

    1979-01-01

    The Task Force on Forest Biomass as an Energy Source was chartered by the Society of American Foresters on September 26, 1977, and took its present form following an amendment to the charter on October 5, 1977. It built upon the findings of two previous task forces, the Task Force on Energy and Forest Resources and the Task Force for Evaluation of the CORRIM Report (...

  17. Renewable Energy Sources for Electricity Generation

    OpenAIRE

    Norrga, Staffan; Stridh, Bengt; Meier, Stephan; Nee, Hans-Peter

    2012-01-01

    The use of conventional energy sources for electricity generation, such as fossil fuel combustion and nuclear power, is questioned because of environmental and safety issues and concerns about possible anthropogenic climate change. This has led to rapid developments in the field of renewable energy exploitation. Entire new fast-growing industries are formed to supply equipment for renewable power plants. The contribution from Swedish industry to this development has so far largely been limite...

  18. Generalization of the analytical solution of neutron point kinetics equations with time-dependent external source

    Science.gov (United States)

    Seidi, M.; Behnia, S.; Khodabakhsh, R.

    2014-09-01

    Point reactor kinetics equations with one group of delayed neutrons in the presence of the time-dependent external neutron source are solved analytically during the start-up of a nuclear reactor. Our model incorporates the random nature of the source and linear reactivity variation. We establish a general relationship between the expectation values of source intensity and the expectation values of neutron density of the sub-critical reactor by ignoring the term of the second derivative for neutron density in neutron point kinetics equations. The results of the analytical solution are in good agreement with the results obtained with numerical solution.

  19. Health Externalities and Heat savings in Energy System Modelling

    DEFF Research Database (Denmark)

    Zvingilaite, Erika

    from the rest of the energy system. This PhD study contributes to the development in energy system modelling, by including heat saving options – insulation of walls, roofs and floors, replacing of windows and installing ventilation system with heat recovery – in the Danish heat and power sector...... and included in an energy system optimisation model. The performed analysis of the Danish heat and power sector concludes that accounting for spatial variation of health damage costs in heat and power system optimisation model has an effect on the optimal technology mix and distribution of energy plants among...... and are popular as secondary heating technologies in Denmark, can cause indoor and outdoor air pollution locally. Hence, consumers can be exposed to their own air pollution, which can cause damage to their health. Such damage costs should be internalised in consumer decision making. The PhD study demonstrates...

  20. The external energy consumption in automobiles manufacturing; La consommation d'energie externe dans la fabrication d'automobiles

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, F.; Lesne, Ch.

    2003-03-01

    This analysis on the external energy consumption in the automotive industry aims at: estimating the energy consumed in the French territory by the overall transports linked with the automotive industry ('external' energy) and comparing it to the energy consumed in car factories ('internal' energy); estimating the CO{sub 2} emission levels linked with the transportation activity and evaluating the impact of these emissions on the main parameters of the automotive industry production (number of vehicles produced). The methodology is based on a first study carried out with the French car maker Renault at the European scale, and extended to the whole automotive industry of France. The first two chapters are devoted to a descriptive analysis of the car making process in an internationalization context. The methodology of estimation of external energy consumptions and of CO{sub 2} emissions is presented in the third chapter. Finally, a modeling at the scale of France is proposed in the last chapter. A synthesis of the results and the lessons learnt are summarized in the conclusion. (J.S.)

  1. Secure optionally passive RFID tag or sensor with external power source and data logging

    Energy Technology Data Exchange (ETDEWEB)

    Nekoogar, Faranak; Reynolds, Matthew; Lefton, Scott; Dowla, Farid; Twogood, Richard

    2016-05-31

    A secure optionally passive RFID tag or sensor system comprises a passive RFID tag having means for receiving radio signals from at least one base station and for transmitting radio signals to at least one base station, where the tag is capable of being powered exclusively by received radio energy, and an external power and data logging device having at least one battery and electronic circuitry including a digital memory configured for storing and recalling data. The external power and data logging device has a means for powering the tag, and also has a means.

  2. EXISTENCE OF INFINITE ENERGY SOLUTION TO THE INELASTIC BOLTZMANN EQUATION WITH EXTERNAL FORCE

    Institute of Scientific and Technical Information of China (English)

    Wei Jinbo; Zhang Xianwen

    2012-01-01

    In this paper,the Cauchy problem for the inelastic Boltzmann equation with external force is considered in the case of initial data with infinite energy.More precisely,under the assumptions on the bicharacteristic generated by external force,we prove the global existence of solution for small initial data compared to the local Maxwellian exp{-p|x-v|2},which has infinite mass and energy.

  3. Reusable Energy and Power Sources: Rechargeable Batteries

    Science.gov (United States)

    Hsiung, Steve C.; Ritz, John M.

    2007-01-01

    Rechargeable batteries are very popular within consumer electronics. If one uses a cell phone or portable electric tool, she/he understands the need to have a reliable product and the need to remember to use the recharging systems that follow a cycle of charge/discharge. Rechargeable batteries are being called "green" energy sources. They are a…

  4. Energy source possibilities in underwater technics

    Science.gov (United States)

    Farin, Juho

    1991-04-01

    Underwater energy source possibilities are treated. The power demand of underwater vehicles is restricted to approximately 0.5 MW. Besides well known primary and secondary batteries as well as conventional diesel engines and closed cycle diesels, fuel cells, radio nuclear isotopes and small nuclear reactors have already been installed or tested in conditions representative of underwater.

  5. Power conversion from environmentally scavenged energy sources.

    Energy Technology Data Exchange (ETDEWEB)

    Druxman, Lee Daniel

    2007-09-01

    As the power requirements for modern electronics continue to decrease, many devices which were once dependent on wired power are now being implemented as portable devices operating from self-contained power sources. The most prominent source of portable power is the electrochemical battery, which converts chemical energy into electricity. However, long lasting batteries require large amounts of space for chemical storage, and inevitably require replacement when the chemical reaction no longer takes place. There are many transducers and scavenging energy sources (SES) that are able to exploit their environment to generate low levels of electrical power over a long-term time period, including photovoltaic cells, thermoelectric generators, thermionic generators, and kinetic/piezoelectric power generators. This generated power is sustainable as long as specific environmental conditions exist and also does not require the large volume of a long lifetime battery. In addition to the required voltage generation, stable power conversion requires excess energy to be efficiently stored in an ultracapacitor or similar device and monitoring control algorithms to be implemented, while computer modeling and simulation can be used to complement experimental testing. However, building an efficient and stable power source scavenged from a varying input source is challenging.

  6. Kansas Energy Sources: A Geological Review

    Energy Technology Data Exchange (ETDEWEB)

    Merriam, Daniel F., E-mail: dmerriam@kgs.ku.edu [University of Kansas (United States); Brady, Lawrence L.; Newell, K. David [University of Kansas, Kansas Geological Survey (United States)

    2012-03-15

    Kansas produces both conventional energy (oil, gas, and coal) and nonconventional (coalbed gas, wind, hydropower, nuclear, geothermal, solar, and biofuels) and ranks the 22nd in state energy production in the U.S. Nonrenewable conventional petroleum is the most important energy source with nonrenewable, nonconventional coalbed methane gas becoming increasingly important. Many stratigraphic units produce oil and/or gas somewhere in the state with the exception of the Salina Basin in north-central Kansas. Coalbed methane is produced from shallow wells drilled into the thin coal units in southeastern Kansas. At present, only two surface coal mines are active in southeastern Kansas. Although Kansas has been a major exporter of energy in the past (it ranked first in oil production in 1916), now, it is an energy importer.

  7. Compact Neutron Sources for Energy and Security

    Science.gov (United States)

    Uesaka, Mitsuru; Kobayashi, Hitoshi

    We choose nuclear data and nuclear material inspection for energy application, and nondestructive testing of explosive and hidden nuclear materials for security application. Low energy (˜100keV) electrostatic accelerators of deuterium are commercially available for nondestructive testing. For nuclear data measurement, electrostatic ion accelerators and L-band (1.428GHz) and S-band (2.856GHz) electron linear accelerators (linacs) are used for the neutron source. Compact or mobile X-band (9.3, 11.424GHz) electron linac neutron sources are under development. A compact proton linac neutron source is used for nondestructive testing, especially water in solids. Several efforts for more neutron intensity using proton and deuteron accelerators are also introduced.

  8. Effect of external fields on the energies of hydrogenic donor with the anharmonic confinement potential

    Energy Technology Data Exchange (ETDEWEB)

    Aciksoz, E.; Bayrak, O. [Department of Physics, Akdeniz University, 07058 Antalya (Turkey); Soylu, A., E-mail: asimsoylu@gmail.com [Department of Physics, Nigde University, 51240 Nigde (Turkey)

    2015-01-01

    The impurity binding energy in the GaAs−Ga{sub 1−x}Al{sub x}As system is studied with an anharmonic type confinement potential by taking into account the influence of the external electric and magnetic fields within the framework of the effective mass approximation and asymptotic iteration method (AIM). The influence of the external electromagnetic fields and anharmonicity on a donor binding energy is examined systematically. It is shown that the donor binding energy is highly dependent on the external electric and magnetic fields and the confinement potential shapes. Both the electric and magnetic fields are increased, the binding energies increase for each of them. However, the behaviors of increase in the weak and strong fields’ regimes have different character a bit. Furthermore, when the more anharmonicity is considered, the binding energy of donor slightly increases as well.

  9. External Benefit Evaluation of Renewable Energy Power in China for Sustainability

    Directory of Open Access Journals (Sweden)

    Huiru Zhao

    2015-04-01

    Full Text Available China’s renewable energy power has developed rapidly in recent years. Evaluating the external benefits of renewable energy power can provide a reference for the Chinese government to set diverse development goals and to implement differentiated supporting policies for different renewable energy power types, which can promote their sustainable development. In this paper, a hybrid MCDM method was applied to evaluate the external benefits of China’s renewable energy power. Firstly, the impacts of renewable energy power accessing the power grid for multiple stakeholders in the electric power system were analyzed. Secondly, the external benefit evaluation index system for renewable energy power was built from the economic, social and environmental factors, based on the concept of sustainability. Then, the basic theory of the hybrid MCDM method employed in this paper was introduced in two parts: the superiority linguistic ratings and entropy weighting method for index weight determination and the fuzzy grey relation analysis for ranking alternatives. Finally, the external benefits of wind power, solar PV power and biomass power were evaluated. Taking a regional electric power system as an example, the results show that PV power has the greatest external benefit, followed by wind power and biomass power. Therefore, more policies supporting PV power should be put in place to promote the harmonious and sustainable development of the whole renewable energy power industry.

  10. Burning plasmas in ITER for energy source

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Nobuyuki [Atomic Energy Commission, Tokyo (Japan)

    2002-10-01

    Fusion research and development has two aspects. One is an academic research on science and technology, i.e., discovery and understanding of unexpected phenomena and, development of innovative technology, respectively. The other is energy source development to realize fusion as a viable energy future. Fusion research has been made remarkable progress in the past several decades, and ITER will soon realize burning plasma that is essential for both academic research and energy development. With ITER, scientific research on unknown phenomena such as self-organization of the plasma in burning state will become possible and it contributes to create a variety of academic outcome. Fusion researchers will have a responsibility to generate actual energy, and electricity generation immediately after the success of burning plasma control experiment in ITER is the next important step that has to be discussed seriously. (author)

  11. Cassava stillage and its anaerobic fermentation liquid as external carbon sources in biological nutrient removal*

    Science.gov (United States)

    Bu, Fan; Hu, Xiang; Xie, Li; Zhou, Qi

    2015-01-01

    The aim of this study was to investigate the effects of one kind of food industry effluent, cassava stillage and its anaerobic fermentation liquid, on biological nutrient removal (BNR) from municipal wastewater in anaerobic-anoxic-aerobic sequencing batch reactors (SBRs). Experiments were carried out with cassava stillage supernatant and its anaerobic fermentation liquid, and one pure compound (sodium acetate) served as an external carbon source. Cyclic studies indicated that the cassava by-products not only affected the transformation of nitrogen, phosphorus, poly-β-hydroxyalkanoates (PHAs), and glycogen in the BNR process, but also resulted in higher removal efficiencies for phosphorus and nitrogen compared with sodium acetate. Furthermore, assays for phosphorus accumulating organisms (PAOs) and denitrifying phosphorus accumulating organisms (DPAOs) demonstrated that the proportion of DPAOs to PAOs reached 62.6% (Day 86) and 61.8% (Day 65) when using cassava stillage and its anaerobic fermentation liquid, respectively, as the external carbon source. In addition, the nitrate utilization rates (NURs) of the cassava by-products were in the range of 5.49–5.99 g N/(kg MLVSS∙h) (MLVSS is mixed liquor volatile suspended solids) and 6.63–6.81 g N/(kg MLVSS∙h), respectively. The improvement in BNR performance and the reduction in the amount of cassava stillage to be treated in-situ make cassava stillage and its anaerobic fermentation liquid attractive alternatives to sodium acetate as external carbon sources for BNR processes. PMID:25845364

  12. Fusion - An energy source for synthetic fuels

    Science.gov (United States)

    Fillo, J. A.; Powell, J.; Steinberg, M.

    1980-05-01

    An important first step in the synthesis of liquid and gaseous fuels is the production of hydrogen. Thermonuclear fusion offers an inexhaustible source of energy for the production of hydrogen from water. Depending on design, electric generation efficiencies of 40 to 60% and hydrogen production efficiencies by high temperature electrolysis of 50 to 70% are projected for fusion reactors using high temperature blankets. Fusion/coal symbiotic systems appear economically promising for the first generation of commercial fusion synfuels plants. In the long term, there could be a gradual transition to an inexhaustible energy system based solely on fusion.

  13. Spectra of Random Hermitian Matrices with a Small-Rank External Source: The critical and near-critical regimes

    CERN Document Server

    Bertola, Marco; Lee, Seung-Yeop; Pierce, Virgil U

    2010-01-01

    Random Hermitian matrices are used to model complex systems without time-reversal invariance. Adding an external source to the model can have the effect of shifting some of the matrix eigenvalues, which corresponds to shifting some of the energy levels of the physical system. We consider the case when the $n\\times n$ external source matrix has two distinct real eigenvalues: $a$ with multiplicity $r$ and zero with multiplicity $n-r$. For a Gaussian potential, it was shown by P\\'ech\\'e \\cite{Peche:2006} that when $r$ is fixed or grows sufficiently slowly with $n$ (a small-rank source), $r$ eigenvalues are expected to exit the main bulk for $|a|$ large enough. Furthermore, at the critical value of $a$ when the outliers are at the edge of a band, the eigenvalues at the edge are described by the $r$-Airy kernel. We establish the universality of the $r$-Airy kernel for a general class of analytic potentials for $r=\\mathcal{O}(n^\\gamma)$ for $0\\leq\\gamma<1/12$.

  14. Cyanate as energy source for nitrifiers

    OpenAIRE

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico; Pogoda, Mario; Han, Ping; von Bergen, Martin; Lagkouvardos, Ilias; Søren M Karst; Galushko, Alexander; Koch, Hanna; Berry, David; Daims, Holger; Wagner, Michael

    2015-01-01

    Ammonia- and nitrite-oxidizers are collectively responsible for the aerobic oxidation of ammonia via nitrite to nitrate and play essential roles for the global biogeochemical nitrogen cycle. The physiology of these nitrifying microbes has been intensively studied since the first experiments of Sergei Winogradsky more than a century ago. Urea and ammonia are the only recognized energy sources that promote the aerobic growth of ammonia-oxidizing bacteria and archaea. Here we report the aerobic ...

  15. Electric Power From Ambient Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    DeSteese, John G.; Hammerstrom, Donald J.; Schienbein, Lawrence A.

    2000-10-03

    This report summarizes research on opportunities to produce electric power from ambient sources as an alternative to using portable battery packs or hydrocarbon-fueled systems in remote areas. The work was an activity in the Advanced Concepts Project conducted by Pacific Northwest National Laboratory (PNNL) for the Office of Research and Development in the U.S. Department of Energy Office of Nonproliferation and National Security.

  16. Renewable energy sources 1991, part 3

    Science.gov (United States)

    Michalicka, L.

    1991-12-01

    The Fourth International Conference on Renewable Energy Sources was held at Prague Technical University from 1-4 Jul. 1991. Part 3 of the proceedings contains a report on the conference and 10 contributions, of which 2 were inputted in INIS: one deals with the economic problems of wind-, solar- and oil-driven water pumps, the other deals with the decrease in sunshine brought about by the operation of Czechoslovak nuclear power plants.

  17. Nuclear energy such as an alternative energy source

    Energy Technology Data Exchange (ETDEWEB)

    Domingos, D.B.; Stecher, L.C.; Menzel, F.; Coelho, T.S.; Giariola, R.S, E-mail: douglasborgesdomingos@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Nuclear power is still an unknown subject to many and ends up being left out when it comes to alternative energy sources and environmental preservation. Unfamiliarity and the disclosures information that are not always correct end up not to show the public the true risks and benefits of this source. The strength of public opinion is the main barrier to the advancement of this technology. So, this paper aims to demystify the villain aspect of nuclear energy that could become a major source for power generation. For this, will be made a historical retrospective of the theories that enabled the field of nuclear fission, the authors and key points, such as will be described how nuclear fission reaction is produced, controlled and sustained and how energy is produced, will be also made an argument on key facts that lead public opinion to stand up against nuclear power, as the generation of radioactive waste and nuclear weapons. Are presented possible solutions beyond the learning and improvements resulting from the occurred accidents. After these analyzes was observed that, besides being a potentially clean source for power generation, it can be safe in order that the waste generated are already safely managed and intelligence groups also monitor terrorist groups, seeking to ensure global security in relation to nuclear weapons and, at the issue of accidents, each event has brought learning and became the nuclear industry today, one of the safest. (author)

  18. Building Energy Management Open Source Software

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, Saifur [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2017-08-25

    Funded by the U.S. Department of Energy in November 2013, a Building Energy Management Open Source Software (BEMOSS) platform was engineered to improve sensing and control of equipment in small- and medium-sized commercial buildings. According to the Energy Information Administration (EIA), small- (5,000 square feet or smaller) and medium-sized (between 5,001 to 50,000 square feet) commercial buildings constitute about 95% of all commercial buildings in the U.S. These buildings typically do not have Building Automation Systems (BAS) to monitor and control building operation. While commercial BAS solutions exist, including those from Siemens, Honeywell, Johnsons Controls and many more, they are not cost effective in the context of small- and medium-sized commercial buildings, and typically work with specific controller products from the same company. BEMOSS targets small and medium-sized commercial buildings to address this gap.

  19. Spectra of random Hermitian matrices with a small-rank external source: supercritical and subcritical regimes

    CERN Document Server

    Bertola, Marco; Lee, Seung-Yeop; Pierce, Virgil U

    2010-01-01

    Random Hermitian matrices with a source term arise, for instance, in the study of non-intersecting Brownian walkers \\cite{Adler:2009a, Daems:2007} and sample covariance matrices \\cite{Baik:2005}. We consider the case when the $n\\times n$ external source matrix has two distinct real eigenvalues: $a$ with multiplicity $r$ and zero with multiplicity $n-r$. The source is small in the sense that $r$ is finite or $r=\\mathcal O(n^\\gamma)$, for $0< \\gamma<1$. For a Gaussian potential, P\\'ech\\'e \\cite{Peche:2006} showed that for $|a|$ sufficiently small (the subcritical regime) the external source has no leading-order effect on the eigenvalues, while for $|a|$ sufficiently large (the supercritical regime) $r$ eigenvalues exit the bulk of the spectrum and behave as the eigenvalues of $r\\times r$ Gaussian unitary ensemble (GUE). We establish the universality of these results for a general class of analytic potentials in the supercritical and subcritical regimes.

  20. The status of the SNS external antenna ion source and spare RFQ test facility

    Energy Technology Data Exchange (ETDEWEB)

    Welton, R. F., E-mail: welton@ornl.gov; Aleksandrov, A. V.; Han, B. X.; Kang, Y.; Murray, S. N.; Pennisi, T. R.; Piller, C.; Santana, M.; Stockli, M. P. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, Tennessee 37830-6471 (United States); Dudnikov, V. G. [Muons, Inc., 552 N. Batavia Avenue, Batavia, Illinois 60510 (United States)

    2016-02-15

    The Oak Ridge National Laboratory operates the Spallation Neutron Source, consisting of a H{sup −} ion source, a 1 GeV linac and an accumulator ring. The accumulated <1 μs-long, ∼35 A beam pulses are extracted from the ring at 60 Hz and directed onto a liquid Hg target. Spalled neutrons are directed to ∼20 world class instruments. Currently, the facility operates routinely with ∼1.2 MW of average beam power, which soon will be raised to 1.4 MW. A future upgrade with a second target station calls for raising the power to 2.8 MW. This paper describes the status of two accelerator components expected to play important roles in achieving these goals: a recently acquired RFQ accelerator and the external antenna ion source. Currently, the RFQ is being conditioned in a newly constructed 2.5 MeV Integrated Test Facility (ITF) and the external antenna source is also being tested on a separate test stand. This paper presents the results of experiments and the testing of these systems.

  1. Measuring the security of external energy supply in the European Union

    DEFF Research Database (Denmark)

    Le Coq, Chloe; Paltseva, Elena

    2009-01-01

    studies of this kind provide aggregate indexes combining different types of energy. Our results suggest that an aggregate approach could be misleading, at least for discussions of the short-term response to risks. We discuss the implications of our findings for the common energy policy.......The security of energy supply is one of the main objectives of EU energy policy. In this paper, we introduce an index designed to evaluate the short-term risks associated with the external supply of energy to the EU Member States. It combines measures of energy import diversification, political...

  2. Energy Systems Integration Facility (ESIF) External Stakeholders Workshop: Workshop Proceedings, 9 October 2008, Golden, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Komomua, C.; Kroposki, B.; Mooney, D.; Stoffel, T.; Parsons, B.; Hammond, S.; Kutscher, C.; Remick, R.; Sverdrup, G.; Hawsey, R.; Pacheco, M.

    2009-01-01

    On October 9, 2008, NREL hosted a workshop to provide an opportunity for external stakeholders to offer insights and recommendations on the design and functionality of DOE's planned Energy Systems Infrastructure Facility (ESIF). The goal was to ensure that the planning for the ESIF effectively addresses the most critical barriers to large-scale energy efficiency (EE) and renewable energy (RE) deployment. This technical report documents the ESIF workshop proceedings.

  3. Cyanate as an energy source for nitrifiers.

    Science.gov (United States)

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico; Pogoda, Mario; Han, Ping; von Bergen, Martin; Lagkouvardos, Ilias; Karst, Søren M; Galushko, Alexander; Koch, Hanna; Berry, David; Daims, Holger; Wagner, Michael

    2015-08-06

    Ammonia- and nitrite-oxidizing microorganisms are collectively responsible for the aerobic oxidation of ammonia via nitrite to nitrate and have essential roles in the global biogeochemical nitrogen cycle. The physiology of nitrifiers has been intensively studied, and urea and ammonia are the only recognized energy sources that promote the aerobic growth of ammonia-oxidizing bacteria and archaea. Here we report the aerobic growth of a pure culture of the ammonia-oxidizing thaumarchaeote Nitrososphaera gargensis using cyanate as the sole source of energy and reductant; to our knowledge, the first organism known to do so. Cyanate, a potentially important source of reduced nitrogen in aquatic and terrestrial ecosystems, is converted to ammonium and carbon dioxide in Nitrososphaera gargensis by a cyanase enzyme that is induced upon addition of this compound. Within the cyanase gene family, this cyanase is a member of a distinct clade also containing cyanases of nitrite-oxidizing bacteria of the genus Nitrospira. We demonstrate by co-culture experiments that these nitrite oxidizers supply cyanase-lacking ammonia oxidizers with ammonium from cyanate, which is fully nitrified by this microbial consortium through reciprocal feeding. By screening a comprehensive set of more than 3,000 publically available metagenomes from environmental samples, we reveal that cyanase-encoding genes clustering with the cyanases of these nitrifiers are widespread in the environment. Our results demonstrate an unexpected metabolic versatility of nitrifying microorganisms, and suggest a previously unrecognized importance of cyanate in cycling of nitrogen compounds in the environment.

  4. Biochar As a Renewable Energy Source

    Science.gov (United States)

    Stein, Richard

    2011-11-01

    Biochar is a form of charcoal prepared by heating biomass in limited air. It is porous and has high surface area, maintaining much of the morphology of the biomass. The heat for its preparation arises primarily from burning volatiles emitted upon heating. About half the chemical energy in the biomass is contained in the biochar, about 40% is used for the conversion, and about 10% may be used as a local heat source. The biochar can serve as a soil additive where it acts as a template for the growth of bacteria and fungi which then lead to improved growth of biomass by as much as several hundred percent. It remains inert in the soil for many years. Thus, it sequesters the carbon, originally coming from the carbon dioxide absorbed during the photosynthesis occurring during the growth of the biomass. Its use reduces fertilizer and water needs and to pollution arising from the run-off of fertilizer and emission of noxious vapors. Its use is best done at a local level, close to sources of biomass from farm and forest waste. The Pioneer Valley Biochar Initiative along with the Center of Agriculture of the University of Massachusetts, Amherst is promoting the use of biochar on local farms which reduces their dependence on energy arising from fossil fuel and nuclear sources.

  5. Energy efficiency and renewable energy sources in Nordic homes

    Energy Technology Data Exchange (ETDEWEB)

    Hyysalo, S.; Rinkinen, J. [Aalto Univ. School of Economics, Helsinki (Finland). Dept. of Management and International Business; Heiskanen, E. [National Consumer Research Centre, Helsinki (Finland)

    2011-07-01

    The role of citizens as innovators, adaptors of existing technologies and diffusers of new climate-relevant innovations has been studied extensively in recent years. Since the late 1970s, sociological and demographic research on residential energy use has consistently found great variations in energy use among similar households. It has been suggested that these variations constitute a source of innovative low-carbon practices. Yet, while there are many generic technologies available for end-use efficiency and renewables, their slow rate of diffusion suggests that they are not as such applicable to local conditions. Citizens have a key role in their adoption and adaptation to local conditions, as well in their diffusion to other users. Against this backdrop, the track 4 of NCF called for poster presentations of innovative new products, modifications of existing products, news ways of make use of existing technologies as well as such living practices that reduce energy use or enable the utilization of renewable energy sources in domestic settings in the Nordic countries. (orig.)

  6. Biomass - alternative renewable energy source to the fossil fuels

    Directory of Open Access Journals (Sweden)

    Koruba Dorota

    2017-01-01

    Full Text Available The article presents the fossil fuels combustion effects in terms of the dangers of increasing CO2 concentration in the atmosphere. Based on the bibliography review the negative impact of increased carbon dioxide concentration on the human population is shown in the area of the external environment, particularly in terms of the air pollution and especially the impact on human health. The paper presents biomass as the renewable energy alternative source to fossil fuels which combustion gives a neutral CO2 emissions and therefore should be the main carrier of primary energy in Poland. The paper presents the combustion heat results and humidity of selected dry wood pellets (pellets straw, energy-crop willow pellets, sawdust pellets, dried sewage sludge from two sewage treatment plants of the Holly Cross province pointing their energy potential. In connection with the results analysis of these studies the standard requirements were discussed (EN 14918:2010 “Solid bio-fuels-determination of calorific value” regarding the basic parameters determining the biomass energy value (combustion heat, humidity.

  7. Denitrification potential enhancement by addition of external carbon sources in a pre-denitrification process

    Institute of Scientific and Technical Information of China (English)

    PENG Yong-zhen; MA Yong; WANG Shu-ying

    2007-01-01

    The aim of this study is to investigate the denitrification potential enhancement by addition of external carbon sources and to estimate the denitrification potential for the predenitrification system using nitrate utilization rate(NUR)batch tests.It is shown that the denitrification potential Can be substantially increased with the addition of three external carbon sources,i.e.methanol,ethanol,and acetate.and the denitrification rates of ethanol,acetate,and methanol reached up to 9.6,12,and 3.2 mgN/(gVSS·h),respectively,while mat of starch wastewater was only 0.74 mgN/(gVSS·h).By comparison,ethanol was found to be the best extemal carbon source.NUR batch tests with starch wastewater and waste ethanol were carried out.The denitrification potential increased from 5.6 to 16.5 mg NO.-N/L owing to waste ethanol addition.By means of NUR tests,the wastewater characteristics and kinetic parameters can be estimated.which are used to determine the denitrification potential of wastewater,to calculate the denitrification potential of the plant and to predict the nitrate effluent quality,as well as provide information for developing carbon dosage conlxol strategy.

  8. Residential magnetic field: Accounting for external sources and residential grounding circuits

    Energy Technology Data Exchange (ETDEWEB)

    Barrow, D.A.

    1989-06-14

    A project to characterize the sources of magnetic fields in residential locations was established as part of Ontario Hydro's program to assess the risks, if any, posed by fields due to the electric power system. In this report, a simple model for the strength of the magnetic field at 60 Hz found inside houses is developed to account for the house wiring, and for sources external to the house. In the model the house wiring is reduced to a single circuit carrying the net current on the service drop to the house and the service grounding current. All sources external to the house are combined and represented as a single ambient field assumed to be spatially uniform throughout the volume of the house. This model and a measurmement procedure were tested on 5 houses in locations inside the houses remote from appliances, which were not included in the model. In the main, good agreement was found between actual measured field strengths and those predicted by the model. 4 refs., 10 figs., 6 tabs.

  9. High energy neutrinos from astrophysical sources

    CERN Document Server

    Perrone, L

    2002-01-01

    Summary form only given. High energy muon neutrinos coming from astrophysical sources could be detected as upward-going muons produced in charged-current interactions of nu /sub mu /'s with the matter surrounding the detector. About 1300 events have been analyzed. We present the results of a search for either a diffuse astrophysical neutrino flux or a point-like source of neutrinos in the sample of upward-going muons gathered by MACRO. We find no evidence for either type of signal. The muon flux upper limit for the diffuse signal has been set at the level of 1.5*10/sup -14/cm/sup -2/ s/sup -1/ sr/sup -1/. (1 refs).

  10. MINIMIZATION OF IMPACTS PERTAINING TO EXTERNAL AND INTERNAL ENERGY SECURITY THREATS OF THERMAL POWER PLANTS

    Directory of Open Access Journals (Sweden)

    V. Nagornov

    2012-01-01

    Full Text Available The paper contains a classification of internal and external threats for thermal power plants and recommendations on minimization of these risks. A set of concrete measures aimed at ensuring TPP energy security has been presented in the paper. The system comprises preventive measures aimed at reducing the possibilities of emergence and implementation of internal and external threats. The system also presupposes to decrease susceptibility of fuel- and energy supply systems to the threats, and application of liquidation measures that ensure elimination of emergency situation consequences and restoration of the conditions concerning fuel- and power supply to consumers.

  11. Photovoltaics as a worldwide energy source

    Science.gov (United States)

    Jones, G. J.

    Photovoltaic energy systems have historically been treated as a bulk power generation source for the future. However, utilities and other agencies involved with electrification throughout the world are beginning to find photovoltaics a least-cost option to meet specific loads both for themselves and their customers, in both off-grid and grid-connected applications. These expanding markets offer the potential of hundreds of megawatts of sales in the coming decade, but a strategy addressing both industrial growth and user acceptance is necessary to capitalize on this opportunity.

  12. Radiant Energy Power Source for Jet Aircraft

    Energy Technology Data Exchange (ETDEWEB)

    Doellner, O.L.

    1992-02-01

    This report beings with a historical overview on the origin and early beginnings of Radiant Energy Power Source for Jet Aircraft. The report reviews the work done in Phase I (Grant DE-FG01-82CE-15144) and then gives a discussion of Phase II (Grant DE-FG01-86CE-15301). Included is a reasonably detailed discussion of photovoltaic cells and the research and development needed in this area. The report closes with a historical perspective and summary related to situations historically encountered on projects of this nature. 15 refs.

  13. Energy Recovery Linacs for Light Source Applications

    Energy Technology Data Exchange (ETDEWEB)

    George Neil

    2011-04-01

    Energy Recovery Linacs are being considered for applications in present and future light sources. ERLs take advantage of the continuous operation of superconducting rf cavities to accelerate high average current beams with low losses. The electrons can be directed through bends, undulators, and wigglers for high brightness x ray production. They are then decelerated to low energy, recovering power so as to minimize the required rf drive and electrical draw. When this approach is coupled with advanced continuous wave injectors, very high power, ultra-short electron pulse trains of very high brightness can be achieved. This paper will review the status of worldwide programs and discuss the technology challenges to provide such beams for photon production.

  14. Outlook for alternative energy sources. [aviation fuels

    Science.gov (United States)

    Card, M. E.

    1980-01-01

    Predictions are made concerning the development of alternative energy sources in the light of the present national energy situation. Particular emphasis is given to the impact of alternative fuels development on aviation fuels. The future outlook for aircraft fuels is that for the near term, there possibly will be no major fuel changes, but minor specification changes may be possible if supplies decrease. In the midterm, a broad cut fuel may be used if current development efforts are successful. As synfuel production levels increase beyond the 1990's there may be some mixtures of petroleum-based and synfuel products with the possibility of some shale distillate and indirect coal liquefaction products near the year 2000.

  15. FINANCING RENEWABLE ENERGY SOURCES INVESTMENT IN POLAND

    Directory of Open Access Journals (Sweden)

    Jerzy Piotr Gwizdała

    2017-09-01

    Full Text Available In Poland, as in other European Union countries, the project finance structure is used to finance investments in the field of energy. This method investment financing is often used in the world. The upward trend inhibition in recent periods has been due to the global financial crisis and financial instability in the euro zone. On account of the necessity to develop the energy infrastructure associated with renewable sources, the considerable strengthening in the use of project finance techniques can be expected. The particular progression may be observed in the case of public-private partnership (ppp, where public investments are carried out by private companies. Companies, in case of investment realization in the field of ppp, almost always use project finance, because it is a beneficial way to separate the risks associated with an investment from the balance sheet of the compa-ny.

  16. SO2 - An indirect source of energy

    DEFF Research Database (Denmark)

    Kriek, R.J.; Van Ravenswaay, J.P.; Potgieter, M.

    2013-01-01

    Global sulphur dioxide (SO2) emissions peaked around the mid- 1970s, after which they declined. However, with the growth of specifically China, emissions are on the rise again. In 2008, global anthropogenic SO2 emissions totalled 127 Mt, with energy production accounting for 63.2 Mt and metal......-related processes 12.8 Mt. As a well-known gaseous pollutant, SO2 is not per se known as a source of energy. However, in the presence of water SO2 can be electro-oxidized at the anode of an electrolyser to produce hydrogen ions, which in turn can be reduced at the cathode of the electrolyser to produce hydrogen gas...

  17. Utilizing alternative energy sources in France

    Energy Technology Data Exchange (ETDEWEB)

    Magnien, M.

    1977-01-01

    The relative merits of various alternative-energy sources are discussed with particular reference to their suitability in the French context. The case is presented for decentralized solar power as against centralized solar-power production and some test installations in France are described. The potential for geothermal power is examined, and it is shown that the resource is essentially nonrenewable. A history of wind generation in France is presented, and power extraction from the seas is discussed, with particular reference to the Rance tidal-power scheme. While the public romance with alternative-energy schemes is accepted, it is pointed out that this may only last for as long as their implementation is on a small scale.

  18. Spherical explosion with central energy source

    CERN Document Server

    Masuyama, Miyu; Tsuboki, Yoichiro

    2015-01-01

    We present a novel semi-analytic solution describing the propagation of a spherical blast wave driven by a central energy source. The initial density profile has a power-law function of the distance from the center and the energy is injected only into the central region at a rate given by a power-law function of time. This solution is composed of three regions separated by the contact surface and the shock front. The innermost region is assumed to be uniform and the outside of the contact surface includes the shocked matter described by self-similar solutions. We analytically derive the applicable range of parameters of this solution from requirements to satisfy boundary conditions. We perform numerical simulations for flows with various values of parameters, some of which reside out of the thus derived applicable range, and compare with the semi-analytic solutions.

  19. Sewage sludge as a biomass energy source

    Directory of Open Access Journals (Sweden)

    Pavel Kolat

    2013-01-01

    Full Text Available The major part of the dry matter content of sewage sludge consists of nontoxic organic compounds, in general a combination of primary sludge and secondary microbiological sludge. The sludge also contains a substantive amount of inorganic material and a small amount of toxic components. There are many sludge-management options in which production of energy is one of the key treatment steps. The most important options are anaerobic digestion, co-digestion, incineration in combination with energy recovery and co-incineration in coal-fired power plants. The goal of our applied research is to verify, if the sludge from waste water treatment plants may be used as a biomass energy source in respect of the EU legislation, which would comply with emission limits or the proposal of energy process optimizing the preparation of coal/sludge mixture for combustion in the existing fluid bed boilers in the Czech Republic. The paper discusses the questions of thermal usage of mechanically drained stabilized sewage sludge from the waste water treatment plants in the boiler with circulated fluid layer. The paper describes methods of thermal analysis of coal, sewage sludge and its mixtures, mud transport to the circulating fluidised bed boiler, effects on efficiency, operational reliability of the combustion equipment, emissions and solid combustion residues.

  20. Microalgae: An Alternative Source of Renewable Energy

    Directory of Open Access Journals (Sweden)

    A. Z. A. Saifullah

    2016-08-01

    Full Text Available This paper presents an overview on the potentiality of microalgae with particular emphasis as a sustainable renewable energy source for biodiesel. One of the most important dilemmas of the modern world is to supply maximal amount of energy with minimal environmental impact. The total energy demand of our planet is increasing with population growth whereas the fossil fuel reserves are dwindling swiftly. Biodiesel produced from biomass is widely considered to be one of the most sustainable alternatives to fossil fuels and a viable means for energy security and environmental and economic sustainability. But as a large area of arable land is required to cultivate biodiesel producing terrestrial plants, it may lead towards food scarcity and deforestation. Microalgae have a number of characteristics that allow the production concepts of biodiesel which are significantly more sustainable than their alternatives. Microalgae possess high biomass productivity, oils with high lipid content, fast growth rates, possibility of utilizing marginal and infertile land, capable of growing in salt water and waste streams, and capable of utilizing solar light and CO2 gas as nutrients.

  1. Energy cost of balance control during walking decreases with external stabilizer stiffness independent of walking speed.

    Science.gov (United States)

    Ijmker, Trienke; Houdijk, Han; Lamoth, Claudine J C; Beek, Peter J; van der Woude, Lucas H V

    2013-09-03

    Human walking requires active neuromuscular control to ensure stability in the lateral direction, which inflicts a certain metabolic load. The magnitude of this metabolic load has previously been investigated by means of passive external lateral stabilization via spring-like cords. In the present study, we applied this method to test two hypotheses: (1) the effect of external stabilization on energy cost depends on the stiffness of the stabilizing springs, and (2) the energy cost for balance control, and consequently the effect of external stabilization on energy cost, depends on walking speed. Fourteen healthy young adults walked on a motor driven treadmill without stabilization and with stabilization with four different spring stiffnesses (between 760 and 1820 Nm(-1)) at three walking speeds (70%, 100%, and 130% of preferred speed). Energy cost was calculated from breath-by-breath oxygen consumption. Gait parameters (mean and variability of step width and stride length, and variability of trunk accelerations) were calculated from kinematic data. On average external stabilization led to a decrease in energy cost of 6% (pwalking speed (p=0.111). These results show that active lateral stabilization during walking involves an energetic cost, which is independent of walking speed. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Effect of external energy on atomic, crystalline and powder characteristics of antimony and bismuth powders

    Indian Academy of Sciences (India)

    Vikram V Dabhade; Rama Mohan R Tallapragada; Mahendra Kumar Trivedi

    2009-10-01

    Next to atoms and molecules the powders are the smallest state of matter available in high purities and large quantities. The effect of any external energy on the shape, morphology and structure can thus be studied with relative ease. The present investigation deals with the effect of a non-contact external energy on the powders of antimony and bismuth. The characteristics of powders treated by external energy are compared with the as received powders (control). The average particle sizes, 50 and 99, the sizes below which 99% of the particles are present showed significant increase and decrease indicating that the energy had caused deformation and fracture as if the powders have been subjected to high energy milling. To be able to understand the reasons for these changes the powders are characterized by techniques such as X-ray diffraction (XRD), surface area determination (BET), thermal analytical techniques such as DTA–DTG, DSC–TGA and SDTA and scanning electron microscopy (SEM). The treated powder samples exhibited remarkable changes in the powder characteristics at all structural levels starting from polycrystalline particles, through single crystal to atoms. The external energy had changed the lattice parameters of the unit cell which in turn changed the crystallite size and density. The lattice parameters are then used to compute the weight and effective nuclear charge of the atom which showed significant variation. It is speculated that the external energy is acting on the nucleus through some reversible weak interaction of larger cross section causing changes in the proton to neutron ratios. Thus the effect is felt by all the atoms, and hence the unit cell, single crystal grain and grain boundaries. The stresses generated in turn may have caused deformation or fracture of the weak interfaces such as the crystallite and grain boundaries.

  3. Using Ground Source Heat Pumps for Renewable Energy

    OpenAIRE

    Xhevat BERISHA

    2017-01-01

    This paper provides background information on the current energy supply, energy demand, and energy sources in Kosovo. Moreover, it presents the country‟s current level of applying alternative energy sources. Additionally, this paper focuses on geothermal energy as a renewable energy resource with the potential to contribute to a sustainable use of resources to meet renewable energy and energy efficiency requirements of the European Union (EU), “EU 20 20 by 2020” policy. Hence, a careful analy...

  4. Background electromagnetic noise characterization: the role of external and internal Earth sources

    Directory of Open Access Journals (Sweden)

    Antonio Meloni

    2015-07-01

    Full Text Available The Earth is surrounded by the ionosphere and magnetosphere that can roughly be seen schematically as two concentric shells. These two composed and inhomogeneous structured shells around the Earth selectively affect electromagnetic (EM waves propagation. Both ionosphere and magnetosphere interact also with particles and waves coming from external sources, generating electromagnetic phenomena that in turn might become sources of EM waves. Conversely, EM waves generated inside the ionosphere remain confined at various altitudes in this region, up to a so-called critical frequency limit, depending on frequency, EM waves can escape out of the ionosphere and magnetosphere or get through. The EM waves generated inside the magnetospheric cavity mainly originate as a result of the electrical activity in the atmosphere. It is well known that also man-made sources, now widely spread on Earth, are a fundamental source of EM waves; however, excluding certain frequencies employed in power distribution and communication, man-made noise can be dominant only at local scale, near their source. According to recent studies, EM waves are also generated in the Earth’s lithosphere; these waves were sometimes associated with earthquake activity showing, on the Earth’s surface, intensities that are generally orders of magnitude below the background EM noise. In this review paper, we illustrate EM waves of natural origin and discuss their characterization in order to try discriminate those of lithospheric origin detectable at or near the Earth’s surface.

  5. Distillery wastes as external carbon sources for denitrification in municipal wastewater treatment plants.

    Science.gov (United States)

    Czerwionka, K; Makinia, J; Kaszubowska, M; Majtacz, J; Angowski, M

    2012-01-01

    In this study, by-products from alcohol production were examined in terms of their potential application as external carbon sources for enhancing denitrification in biological nutrient removal systems. Three types of batch tests were used to compare the effects of the distillery by-products, such as fusel oil, syrup and reject water, on the non-acclimated activated sludge. Much higher nitrate utilization rates (NURs) were observed for the latter two carbon sources. In the conventional NUR measurements (one-phase experiments), the observed NURs with syrup and reject water were 3.2-3.3 g N/(kg VSS h) compared with 1.0 g N/(kg VSS h) obtained for fusel oils from two different distilleries. When the carbon sources were added at the beginning of the anoxic phase preceded by an anaerobic phase (two-phase experiments), the NURs were 4.2 g N/(kg VSS h) (syrup and reject water) and 2.4-2.7 g N/(kg VSS h) (fusel oils). The heterotrophic yield coefficient, determined based on the conventional OUR measurements, varied in a relatively narrow range (0.72-0.79 g COD/g COD) for all the examined carbon sources. Due to advantageous composition (much higher COD concentrations and COD/N ratios), fusel is a preferred carbon source for practical handling in full-scale wastewater treatment plants.

  6. External and internal sources which inhibit the nitrification process in wastewater treatment plants

    DEFF Research Database (Denmark)

    Sinkjær, O.; Bøgebjerg, P.; Grüttner, Henrik

    1996-01-01

    In connection with the upgrading of the two largest wastewater treatment plants in the Copenhagen area to nutrient removal special attention has been paid to the nitrification process regarding inhibition effects. Inhibitory substances in the wastewater could be identified by simple batch tests......, and the long-term effects on the nitrification process were tested in pilot plants or at full-scale. A distinction could be made between effects produced by wastewater from external sources in the catchment area and internally circulated flows in the wastewater treatment plant. Results from programmes...... the nitrification capacity monitored at the pilot plants has been in agreement with the design basis. The recycling of the scrubber water from the cleaning of sludge incineration flue gas was found to be an important internal source of inhibition at the Lynetten WWTP. Investigations show that it is possible...

  7. Direct growth and patterning of multilayer graphene onto a targeted substrate without an external carbon source.

    Science.gov (United States)

    Kang, Dongseok; Kim, Won-Jun; Lim, Jung Ah; Song, Yong-Won

    2012-07-25

    Using only a simple tube furnace, we demonstrate the synthesis of patterned graphene directly on a designed substrate without the need for an external carbon source. Carbon atoms are absorbed onto Ni evaporator sources as impurities, and incorporated into catalyst layers during the deposition. Heat treatment conditions were optimized so that the atoms diffused out along the grain boundaries to form nanocrystals at the catalyst-substrate interfaces. Graphene patterns were obtained under patterned catalysts, which restricted graphene formation to within patterned areas. The resultant multilayer graphene was characterized by Raman spectroscopy and transmission electron microscopy to verify the high crystallinity and two-dimensional nanomorphology. Finally, a metal-semiconductor diode with a catalyst-graphene contact structure were fabricated and characterized to assess the semiconducting properties of the graphene sheets with respect to the display of asymmetric current-voltage behavior.

  8. Building Energy Management Open Source Software

    Energy Technology Data Exchange (ETDEWEB)

    2017-06-20

    This is the repository for Building Energy Management Open Source Software (BEMOSS), which is an open source operating system that is engineered to improve sensing and control of equipment in small- and medium-sized commercial buildings. BEMOSS offers the following key features: (1) Open source, open architecture – BEMOSS is an open source operating system that is built upon VOLTTRON – a distributed agent platform developed by Pacific Northwest National Laboratory (PNNL). BEMOSS was designed to make it easy for hardware manufacturers to seamlessly interface their devices with BEMOSS. Software developers can also contribute to adding additional BEMOSS functionalities and applications. (2) Plug & play – BEMOSS was designed to automatically discover supported load controllers (including smart thermostats, VAV/RTUs, lighting load controllers and plug load controllers) in commercial buildings. (3) Interoperability – BEMOSS was designed to work with load control devices form different manufacturers that operate on different communication technologies and data exchange protocols. (4) Cost effectiveness – Implementation of BEMOSS deemed to be cost-effective as it was built upon a robust open source platform that can operate on a low-cost single-board computer, such as Odroid. This feature could contribute to its rapid deployment in small- or medium-sized commercial buildings. (5) Scalability and ease of deployment – With its multi-node architecture, BEMOSS provides a distributed architecture where load controllers in a multi-floor and high occupancy building could be monitored and controlled by multiple single-board computers hosting BEMOSS. This makes it possible for a building engineer to deploy BEMOSS in one zone of a building, be comfortable with its operation, and later on expand the deployment to the entire building to make it more energy efficient. (6) Ability to provide local and remote monitoring – BEMOSS provides both local and remote monitoring

  9. Cyanate as energy source for nitrifiers

    Science.gov (United States)

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico; Pogoda, Mario; Han, Ping; von Bergen, Martin; Lagkouvardos, Ilias; Karst, Søren M.; Galushko, Alexander; Koch, Hanna; Berry, David; Daims, Holger; Wagner, Michael

    2015-01-01

    Ammonia- and nitrite-oxidizers are collectively responsible for the aerobic oxidation of ammonia via nitrite to nitrate and play essential roles for the global biogeochemical nitrogen cycle. The physiology of these nitrifying microbes has been intensively studied since the first experiments of Sergei Winogradsky more than a century ago. Urea and ammonia are the only recognized energy sources that promote the aerobic growth of ammonia-oxidizing bacteria and archaea. Here we report the aerobic growth of a pure culture of the ammonia-oxidizing thaumarchaeote Nitrososphaera gargensis1 on cyanate as the sole source of energy and reductant, the first organism known to do so. Cyanate, which is a potentially important source of reduced nitrogen in aquatic and terrestrial ecosystems2, is converted to ammonium and CO2 by this archaeon using a cyanase that is induced upon addition of this compound. Within the cyanase gene family, this cyanase is a member of a distinct clade that also contains cyanases of nitrite-oxidizing bacteria of the genus Nitrospira. We demonstrate by co-culture experiments that these nitrite-oxidizers supply ammonia-oxidizers lacking cyanase with ammonium from cyanate, which is fully nitrified by this consortium through reciprocal feeding. Screening of a comprehensive set of more than 3,000 publically available metagenomes from environmental samples revealed that cyanase-encoding genes clustering with the cyanases of these nitrifiers are widespread in the environment. Our results demonstrate an unexpected metabolic versatility of nitrifying microbes and suggest a previously unrecognized importance of cyanate for N-cycling in the environment. PMID:26222031

  10. Complete Form of Fermion Self-energy in NJL Model with External Magnetic Field

    CERN Document Server

    Shi, Song; Cui, Zhu-Fang; Xia, Yong-Hui; Zong, Hong-Shi

    2016-01-01

    In this paper, we aim to study the complete form of self-energy in fermion propagator within two-flavor NJL model in the case of finite temperature, chemical potential and external magnetic field. Through self-consistency analysis we prove that the self-energy is not simply proportional to dynamical mass in the presence of chemical potential, moreover, it could be more complicated after introducing external magnetic field. We find out the appropriate and complete form of self-energy and establish new gap equations. The numerical results show that the dynamical mass only has small quantitative modification rather than qualitative change by using these new gap equations, but the new self-energy does generate split in the dispersion relation with fixed momentum and Landau level.

  11. 77 FR 18477 - Energy Conservation Program: Energy Conservation Standards for Battery Chargers and External...

    Science.gov (United States)

    2012-03-27

    ... March 27, 2012 Part III Department of Energy 10 CFR Part 430 Energy Conservation Program: Energy... 430 RIN 1904-AB57 Energy Conservation Program: Energy Conservation Standards for Battery Chargers and... Conservation Act (EPCA) prescribes energy conservation standards for various consumer products and...

  12. Influences of external factors on the energy conversion and productivity of Scenedesmus sp. in mass culture

    NARCIS (Netherlands)

    Wesselius, J.C.

    1973-01-01

    Experiments about the influence of external factors on the energy conversion in mass cultures of Scenedesmus are described in this thesis. Several types of culture vessels were used in the laboratory as well as in the open. Demonstration models of Miele washing

  13. Influences of external factors on the energy conversion and productivity of Scenedesmus sp. in mass culture

    NARCIS (Netherlands)

    Wesselius, J.C.

    1973-01-01

    Experiments about the influence of external factors on the energy conversion in mass cultures of Scenedesmus are described in this thesis. Several types of culture vessels were used in the laboratory as well as in the open. Demonstration models of Miele washing machines with a volume of 50 l were us

  14. Influences of external factors on the energy conversion and productivity of Scenedesmus sp. in mass culture

    NARCIS (Netherlands)

    Wesselius, J.C.

    1973-01-01

    Experiments about the influence of external factors on the energy conversion in mass cultures of Scenedesmus are described in this thesis. Several types of culture vessels were used in the laboratory as well as in the open. Demonstration models of Miele washing machine

  15. Endogenous monitoring: a new challenge for the regulation of energy externalities

    Energy Technology Data Exchange (ETDEWEB)

    Millock, K

    1999-11-01

    The present article studies the problem of regulating externalities from energy use, with particular emphasis on the problem of information. A standard economics. The article shows how the optimal choice of instruments used to regulate the externalities from energy use will change with the more widespread adoption of modern monitoring technologies. We will illustrate how the application of incentive policies conditioned on monitoring can contribute to the implementation of flexible mechanisms for greenhouse gas abatement. Section 2 briefly summarises the economic framework for the regulation of externalities resulting from energy use. In Section 3, an illustrative model is presented in which the introduction of monitoring of emissions is endogenous and conditions the best type of instrument used by the regulator to internalize the externalities from energy use. Section 4 then examines the implications of this framework for the application of the flexible incentives introduced in the Kyoto Protocol. It shows how the success of project-based approaches, such as Joint Implementation and the Clean Development Mechanism, depends upon the implementation of appropriate incentives for monitoring. Section 5 concludes. (author)

  16. Changes in Energy Cost and Total External Work of Muscles in Elite Race Walkers Walking at Different Speeds

    Directory of Open Access Journals (Sweden)

    Chwała Wiesław

    2014-12-01

    Full Text Available The aim of the study was to assess energy cost and total external work (total energy depending on the speed of race walking. Another objective was to determine the contribution of external work to total energy cost of walking at technical, threshold and racing speed in elite competitive race walkers.

  17. Energy and external policies: a necessary connection; Politica energetica e politica externa: uma articulacao necessaria

    Energy Technology Data Exchange (ETDEWEB)

    Bicalho, Ronaldo

    2007-07-01

    From the present confrontation - sometimes veiled and sometimes opened - the National States must guarantee the energy supplying. So, it is absolutely necessary. The Brazilian society is discovering from the Bolivian gas question this interlacing among the energy and external politics. In this sense, the analysis of USA and European Community may contribute for the understanding the logic of this game that we just starting and probably we will more involved.

  18. Potential evaluation of biomass-based energy sources for Turkey

    OpenAIRE

    Mustafa Ozcan; Semra Öztürk; Yuksel Oguz

    2015-01-01

    Turkey has great potential with respect to renewable energy sources (RES) and, among such sources, “biomass energy” is of particular importance. The purpose of this study is to determine the primary electrical energy potential obtainable from the biomass potential, according to different biomass source types. In this study, the biomass sources of municipal solid wastes, energy crops, animal manure and urban wastewater treatment sludge are evaluated. For each source, individual biogas and biom...

  19. 46 CFR 111.10-5 - Multiple energy sources.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Multiple energy sources. 111.10-5 Section 111.10-5...-GENERAL REQUIREMENTS Power Supply § 111.10-5 Multiple energy sources. Failure of any single generating set energy source such as a boiler, diesel, gas turbine, or steam turbine must not cause all generating...

  20. Human health-related externalities in energy system modelling the case of the Danish heat and power sector

    DEFF Research Database (Denmark)

    Zvingilaite, Erika

    2011-01-01

    This paper discusses methodology of energy system modelling when reduction of local externalities, such as damage to the human health from energy production-related air pollution, is in focus. Ideally, the local energy externalities should be analysed by adopting the impact pathway approach...... of ExternE study, and following the pollutants from their release to the personal uptake and resulting health effects. This would require inclusion of air pollution modelling and monetary valuation of the impacts into an energy system optimisation process. However, this approach involves a complex study...... and power sector verifies that it is cheaper for the society to include externalities in the planning of an energy system than to pay for the resulting damages later. Total health costs decrease by around 18% and total system costs decrease by nearly 4% when health externalities are included...

  1. Electric discharge excitation and energy source integration

    Science.gov (United States)

    Grosjean, D. F.

    1985-01-01

    Methods of transferring energy from electrical storage to an electro-negative gas discharge at high repetition rates of approx. modeling of the pertinent kinetics of a He/Xe/HCl gas mixture which was performed in conjunction with various configurations of pulse-forming networks is described; gas thyratrons and magnetic switches were used as switching elements. Due to the relatively constant E/N characterisitics of this system, a stripline arrangement is shown to provide the most efficient method of energy transfer for pulse lengths approx < 50 nsec. Capacitor discharge methods are applicable to shorter pulse lengths. Construction of a closed-cycled, high-rep-rate XeCl gas-discharge laser is described. Operation of an X-ray preionized system at 1.5 kHz is also detailed; no contamination was observed in this configuration. The application of the XeCl laser as a pump source for a high-rep-rate, high-average-power dye laser is also described. A flowing-dye jet was utilized in order to avoid liquid-cell boundary-layer problems of a fast-flow stream. The optical quality of the jet stream was the limiting factor in achieving the power goals. A method of achieving high efficiency in a rare-gas-halide system is proposed via a magnetic switch and prepulse arrangement in conjunctions with a stripline PFN.

  2. Impact of external industrial sources on the regional and local air quality of Mexico Megacity

    Directory of Open Access Journals (Sweden)

    V. H. Almanza

    2013-10-01

    Full Text Available The air quality of megacities can be influenced by external emissions sources on both global and regional scale, and at the same time their outflow emissions can exert an important impact to the surrounding environment. The present study evaluates an SO2 peak observed on 24 March 2006 at the suburban supersite T1 and ambient air quality monitoring stations located in the north region of the Mexico City Metropolitan Area (MCMA during MILAGRO campaign. We found that this peak could be related to an important episodic emission event from Tizayuca region, northeast of the MCMA. Back trajectories analyses suggest that the emission event started in the early morning at 04:00 LST and lasted for about 9 h. The estimated emission rate is noticeably high, about 2 kg s−1. This finding suggests the possibility of "overlooked" emission sources in this region that could influence the air quality of the MCMA. This further motivated us to study the cement plants, including those in the State of Hidalgo and in the State of Mexico, and we found that they can contribute in the NE region of the basin (about 41.7%, at the suburban supersite T1 (41.23% and at some monitoring stations their contribution can be even higher than from the Tula Industrial Complex. The contribution of Tula Industrial Complex to regional ozone levels is estimated. The model suggests low contribution to the MCMA (1 ppb to 4 ppb and slightly higher at the suburban T1 (6 ppb and rural T2 (5 ppb supersites. However, the contribution could be as high as 10 ppb in the upper northwest region of the basin and in the southwest and south-southeast regions of State of Hidalgo. In addition, a first estimate of the potential contribution from flaring activities to regional ozone levels is presented. Emission rates are estimated with a CFD combustion model. Results suggest that up to 30% of the total regional ozone from TIC could be related to flaring activities. Finally, the influence in SO2 levels

  3. Effects of aqueous humor hydrodynamics on human eye heat transfer under external heat sources.

    Science.gov (United States)

    Tiang, Kor L; Ooi, Ean H

    2016-08-01

    The majority of the eye models developed in the late 90s and early 00s considers only heat conduction inside the eye. This assumption is not entirely correct, since the anterior and posterior chambers are filled aqueous humor (AH) that is constantly in motion due to thermally-induced buoyancy. In this paper, a three-dimensional model of the human eye is developed to investigate the effects AH hydrodynamics have on the human eye temperature under exposure to external heat sources. If the effects of AH flow are negligible, then future models can be developed without taking them into account, thus simplifying the modeling process. Two types of external thermal loads are considered; volumetric and surface irradiation. Results showed that heat convection due to AH flow contributes to nearly 95% of the total heat flow inside the anterior chamber. Moreover, the circulation inside the anterior chamber can cause an upward shift of the location of hotspot. This can have significant consequences to our understanding of heat-induced cataractogenesis. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

  4. Utilization of Wastes as an Alternative Energy Source for ...

    African Journals Online (AJOL)

    Utilization of Wastes as an Alternative Energy Source for Sustainable Development: A REVIEW. ... for energy and to address environmental concerns, a conversion from conventional energy systems to renewable resources is essential. For the ...

  5. Analysis of Nonlinear Dispersion of a Pollutant Ejected by an External Source into a Channel Flow

    Directory of Open Access Journals (Sweden)

    T. Chinyoka

    2010-01-01

    Full Text Available This paper focuses on the transient analysis of nonlinear dispersion of a pollutant ejected by an external source into a laminar flow of an incompressible fluid in a channel. The influence of density variation with pollutant concentration is approximated according to the Boussinesq approximation, and the nonlinear governing equations of momentum and pollutant concentration are obtained. The problem is solved numerically using a semi-implicit finite difference method. Solutions are presented in graphical form and given in terms of fluid velocity, pollutant concentration, skin friction, and wall mass transfer rate for various parametric values. The model can be a useful tool for understanding the polluting situations of an improper discharge incident and evaluating the effects of decontaminating measures for the water body.

  6. The energy savings potential of using dynamic external louvers in an office building

    Energy Technology Data Exchange (ETDEWEB)

    Hammad, Fawwaz [W.S. Atkins, Abu Dhabi (United Arab Emirates); Abu-Hijleh, Bassam [Atkins Chair, Faculty of Engineering, The British University in Dubai, PO Box 345015, Dubai (United Arab Emirates)

    2010-10-15

    This research is aimed at exploring the influence of external dynamic louvers on the energy consumption of an office building located in Abu Dhabi-UAE. The IES-VR software was used to predict the energy consumption of a representative office module in order to evaluate the overall energy performance of employing external louvers on the south, east and west oriented facades. The use of dynamic facades was compared to another simpler method of using light-sensor controlled light dimmers. The results show that the potential energy savings using light dimming strategy only was 24.4%, 24.45% and 25.19% for the south, east and west oriented facades, respectively. The proposed dynamic louvers system with light dimming strategy achieved energy savings of 34.02%, 28.57% and 30.31% for the south, east and west orientations, respectively. Detailed analysis of the results showed that the facade's optimal static angle was -20 for the south oriented facade and 20 for the east and west oriented facades. Using these fixed optimal angles resulted in slightly lower energy savings than that of the dynamic facades. This would seem to be a good tradeoff between savings in energy running cost and the investment required to install, operate and maintain a dynamic facades system. (author)

  7. Potential evaluation of biomass-based energy sources for Turkey

    Directory of Open Access Journals (Sweden)

    Mustafa Ozcan

    2015-06-01

    Full Text Available Turkey has great potential with respect to renewable energy sources (RES and, among such sources, “biomass energy” is of particular importance. The purpose of this study is to determine the primary electrical energy potential obtainable from the biomass potential, according to different biomass source types. In this study, the biomass sources of municipal solid wastes, energy crops, animal manure and urban wastewater treatment sludge are evaluated. For each source, individual biogas and biomass energy potential calculations are made. Methods for energy conversion from wastes applicable to the conditions of Turkey, and technical and economic parameters are used. As a result of the calculations made, the total primary energy value of biogas obtainable from the examined sources is 188.21 TWh/year. The total primary energy value related to the potential of the evaluated biomass sources is 278.40 TWh/year.

  8. The effect of competition from open source software on the quality of proprietary software in the presence of network externalities

    Directory of Open Access Journals (Sweden)

    Mingqing Xing

    2015-05-01

    Full Text Available Purpose: A growing number of open source software emerges in many segments of the software market. In addition, software products usually exhibit network externalities. The purpose of this paper is to study the impact of open source software on the quality choices of proprietary software vendors when the market presents positive network externalities. Design/methodology: To analyze how open source software affects the optimal quality of proprietary software, this paper constructs two vertical differentiation models: the basic model considers proprietary software monopolizing the market, and its extended one considers proprietary software competing with open source substitute. Findings: This paper mainly finds that the presence of open source software does not necessarily lead to the quality of proprietary software decreases (or increases. The network externalities and compatibility between open source and proprietary software may change the impact of open source software on the quality of proprietary software and may affect the quality choices of proprietary software vendors. Originality/value: The main contribution of this paper is to examine the effect of open source software on the quality choices for proprietary software vendors in software markets exhibiting positive network externalities.

  9. Wind, hydro or mixed renewable energy source

    DEFF Research Database (Denmark)

    Yang, Yingkui; Solgaard, Hans Stubbe; Haider, Wolfgang

    2016-01-01

    While the share of renewable energy, especially wind power, increases in the energy mix, the risk of temporary energy shortage increases as well. Thus, it is important to understand consumers' preference for the renewable energy towards the continuous growing renewable energy society. We use...

  10. Effective Land Use for Renewable Energy Sources

    NARCIS (Netherlands)

    Dijkman, Teunis

    2009-01-01

    The aim of this research is to determine the energy densities for different methods to produce renew-able energy. Energy density is defined here as the energy that is annually produced on a certain area. Using low, average, and high energy density scenari

  11. BIOMASS AS AN ALTERNATIVE SOURCE OF ENERGY IN INDIA

    OpenAIRE

    2010-01-01

    The fossil fuel is a main source of energy for generation of electricity in India. Overall, about 80% of greenhouse gas (GHS) emissions are related to the production and use of energy, and particularly, burning of fossils fuels. The environmental problems are associated with the generation of conventional sources of energy.The Kyoto protocol has established flexible mechanisms for developing countries to meet there GHG reduction commitment. Therefore, renewable source of energy is an alternat...

  12. Alternative biomass sources for thermal energy generation

    Science.gov (United States)

    Steensen, Torge; Müller, Sönke; Dresen, Boris; Büscher, Olaf

    2015-04-01

    Traditionally, renewable biomass energy sources comprise forests, agriculture and other large vegetation units. With the increasing demand on those landscape elements, including conflicts of interest to nature conservation and food production, the research focus should also incorporate smaller vegetation entities. In this study, we highlight the availability of small-scale features like roadside vegetation or hedges, which are rarely featured in maps. Roadside vegetation, however, is well known and regularly trimmed to allow the passing of traffic but the cut material is rarely harvested. Here, we combine a remote-sensing-based approach to quantify the seasonal biomass harvests with a GIS-based method to outline optimal transportation routes to, and the location of, storage units and power plants. Our main data source will be ESA's upcoming Sentinel-2 optical satellite. Spatial resolution of 10 meters in the visible and near infrared requires the use of spectral unmixing to derive end member spectra of the targeted biomass objects. Additional stereo-matching and LIDAR measurements allow the accompanying height estimate to derive the biomass volume and its changes over time. GIS data bases from the target areas allow the discrimination between traditional, large features (e.g. forests and agriculture) as well as previously unaccounted for, smaller vegetation units. With the mapped biomass occurrence and additional, GIS-based infrastructure information, we can outline transport routes that take into account local restrictions like nature reserve areas, height or weight limitations as well as transport costs in relation to potential gains. This information can then be processed to outline optimal places for power plants. To simulate the upcoming Sentinel-2 data sets, we use airborne data from the AISA Eagle, spatially and spectrally down-sampled to match Sentinel 2's resolution. Our test scenario is an area in western Germany, the Kirchheller Heide, close to the city

  13. External loading does not change energy cost and mechanics of rollerski skating.

    Science.gov (United States)

    Millet, G; Perrey, S; Candau, R; Belli, A; Borrani, F; Rouillon, J D

    1998-08-01

    The purpose of this study was to examine the effects of external loading on the energy cost and mechanics of roller ski skating. A group of 13 highly skilled male cross-country skiers roller skied at 19.0 ( SD 0.1) km x h(-1) without additional load and with loads of 6% and 12% body mass (mb). Oxygen uptake (VO2), knee and ankle joint kinematics, roller-ski electromyogram (EMG) of the vastus lateralis and gastrocnemius lateralis muscles, and roller ski velocity were recorded during the last 40 s of each 4-min period of roller skiing. One-way repeated measures ANOVA revealed that the VO2 expressed relative to total mass (mtot), joint kinetics, eccentric-to-concentric ratio of the integrated EMG, velocity changes within a cycle, and cycle rate did not change significantly with load. The subsequent analysis of the effect of load on each resistance opposing motion suggested that the power to sustain changes in translational kinetic energy, potential energy, and overcoming rolling resistance increased proportionately with the load. The lack of a significant change in VO2/mtot with external loading was associated with a lack of marked change in external mechanical power relative to mtot. The existence of an EMG signal during the eccentric phase prior to the thrust (concentric phase), as well as the lack of significant delay between the two phases, showed that a stretch-shortening cycle (SSC) occurs in roller ski skating. Taken together, the present results would suggest that external loading up to 12% mb does not increase storage and release of elastic energy of lower limb muscles during SSC in roller ski skating.

  14. The Development of Renewable Energy Sources in Turkey

    Directory of Open Access Journals (Sweden)

    Atalay ÇETİN

    2014-10-01

    Full Text Available Especially in last two decades, most of the developed and developing countries around theworld have been supporting the researches that investigate more clean and sustainable energy sources. Renewable energy sources play more important role in today’s increasingly globalized energy market because of the environmental issues and the sources of fossil fuelare becoming scarce. According to that, as a virtue of the rapidly increase in energy demand, the supply of renewable energy sources are increasingly continue around theworld. As a matter of fact, when it is compared to the 2011 rates, the consumption rate of hydro-electricity and other renewable energy sources has increased to 4.3% and % 15.2 respectively in 2012 in the world, is verifying that view.The aim of this study is to investigate the present potential and sufficiency of the main sources of renewable energy such as solar, wind, hydropower, geothermal andbiomass at Turkey. In this regard, even Turkey has a remarkable potential especially in hydro, wind, solar and geothermal energies among Europe, renewable energy sources ratio in Turkey’s total energy consumption is not rising at desired level. Furthermore becauseTurkey hasn’t got a rich fossil fuel reserves, it needs to import fossil energy sources to meet its rapidly growing energy needs. In related to this, Turkey’s current deficit has beengrowing due to the increase in fossil fuel sources prices at international energy markets. On the other side Turkey’s Green House Gases (GHGs emission has grown more thantwo times as a result of its rapidly using of fossil fuel sources due to its growing economy, industrialization and urbanization process since 1990. Within this context, as a foreigndependent country on fossil fuel energy sources (especially on crude oil and natural gas, Turkey should rapidly change its energy policy from fossil fuels to renewable energysources which are domestic, clean and much more cheaper

  15. External energy policy: Old fears and new dilemmas in a larger Union. Chapter 9

    Energy Technology Data Exchange (ETDEWEB)

    Van der Linde, C.

    2007-07-01

    This chapter attempts both to analyse the development of energy policy making in the EU and to discuss the energy security dilemmas that confront the member states in the short and medium term. The central issue here is how security of supply and a sustainable energy system can be achieved in a market environment, which is the main thrust of the Commissions proposals, while at the same time government intervention in international energy markets is on the rise. It is suggested that the mismatch between the level of government involvement and the market model in the international energy sector has become more pronounced lately and impacts upon the security of supply and demand policy toolset of consumer and producer countries. Arguably, the switch from an international oil and gas buyers' market to a sellers market has not only rekindled resource nationalism in producer countries but also stimulated a certain preference for bilateral energy relations over multilateral ones in some consumer countries in an attempt to secure supplies. Chinese energy diplomacy in Africa and elsewhere is a good example of bilateralism, while some member states also deem the Nordstream pipeline project to be an example of energy bilateralism on the part of Germany. The latter project was clearly a trigger for the current EU proposal on external energy relations, encouraging member states to 'speak with one voice'. However, it will be argued in this chapter that the asymmetry in import dependency among the member states, the preference of member states for a certain energy mix, the member state' competitive position in world markets and different foreign and security approaches, will make 'speaking with one voice' a lot harder to achieve than in climate change matters. This chapter first gives some facts and figures about European energy. It then discusses both past and current energy policy in the EU. The issue is raised whether the strategic energy

  16. Can renewable energy sources satiate Slovakia's future energy needs?

    Energy Technology Data Exchange (ETDEWEB)

    Tomis, Igor; Koval, Peter; Janicek, Frantisek; Darula, Ivan

    2010-09-15

    The paper examines the options for replacing the current energy mix of non-renewable, conventional energy sources solely with renewable sources in the long term within the context of the Slovak environment, possibly combined with nuclear energy in the 50-year horizon. Vital needs are outlined in household energy consumption and energy consumption for industrial and transportation purposes to fulfil in order for Slovakia to become independent of foreign sources in energy supplies.

  17. Compacton-like solutions for modified KdV and nonlinear Schrödinger equation with external sources

    Indian Academy of Sciences (India)

    Thokala Soloman Raju; C Nagaraja Kumar; Prasanta K Panigrahi

    2014-08-01

    We present new types of compacton-like solutions for modified KdV and nonlinear Schrödinger equation with external sources, using a recently developed fractional transformation. In particular, we explicate these novel compactons for the trigonometric case, and compare their properties with those of the compactons and solitons in the case of modified KdV equation. Keeping in mind the significance of nonlinear Schrödinger equation with external source, for pulse propagation through asymmetric twin-core fibres, we hope that the newly found compacton may be launched in a long-haul telecommunication network utilizing asymmetric twin-core fibres.

  18. High fidelity nuclear energy system optimization towards an environmentally benign, sustainable, and secure energy source.

    Energy Technology Data Exchange (ETDEWEB)

    Tsvetkov, Pavel Valeryevich (Texas A& M University, College Station, TX); Rodriguez, Salvador B.; Ames, David E., II (Texas A& M University, College Station, TX); Rochau, Gary Eugene

    2009-09-01

    The impact associated with energy generation and utilization is immeasurable due to the immense, widespread, and myriad effects it has on the world and its inhabitants. The polar extremes are demonstrated on the one hand, by the high quality of life enjoyed by individuals with access to abundant reliable energy sources, and on the other hand by the global-scale environmental degradation attributed to the affects of energy production and use. Thus, nations strive to increase their energy generation, but are faced with the challenge of doing so with a minimal impact on the environment and in a manner that is self-reliant. Consequently, a revival of interest in nuclear energy has followed, with much focus placed on technologies for transmuting nuclear spent fuel. The performed research investigates nuclear energy systems that optimize the destruction of nuclear waste. In the context of this effort, nuclear energy system is defined as a configuration of nuclear reactors and corresponding fuel cycle components. The proposed system has unique characteristics that set it apart from other systems. Most notably the dedicated High-Energy External Source Transmuter (HEST), which is envisioned as an advanced incinerator used in combination with thermal reactors. The system is configured for examining environmentally benign fuel cycle options by focusing on minimization or elimination of high level waste inventories. Detailed high-fidelity exact-geometry models were developed for representative reactor configurations. They were used in preliminary calculations with Monte Carlo N-Particle eXtented (MCNPX) and Standardized Computer Analysis for Licensing Evaluation (SCALE) code systems. The reactor models have been benchmarked against existing experimental data and design data. Simulink{reg_sign}, an extension of MATLAB{reg_sign}, is envisioned as the interface environment for constructing the nuclear energy system model by linking the individual reactor and fuel component sub

  19. 10 CFR Appendix Z to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of External Power Supplies

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption... Appendix Z to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of External Power Supplies 1. Scope: This appendix covers the test requirements used to measure energy consumption...

  20. Investigation of Solar and Solar-Gas Thermal Energy Sources

    Directory of Open Access Journals (Sweden)

    Jan Zupa

    2003-01-01

    Full Text Available The article deals with the investigation of solar thermal sources of electrical and heat energy as well as the investigation of hybrid solar-gas thermal sources of electrical and heat energy (so called photothermal sources. Photothermal sources presented here utilize computer-controlled injection of the conversion fluid into special capillary porous substance that is adjusted to direct temperature treatment by the concentrated thermal radiation absorption.

  1. Impact of external industrial sources on the regional and local air quality of Mexico Megacity

    Science.gov (United States)

    Almanza, Victor; Molina, Luisa T.; Li, Guohui; Fast, Jerome; Sosa, Gustavo

    2014-05-01

    The air quality of megacities can be influenced by external emissions sources on both regional and global scales. At the same time their outflow emissions can exert an important impact to the surrounding environment. The present study evaluates an SO2 peak observed on 24 March 2006 at the suburban supersite and ambient air quality monitoring stations located in the northern region of the Mexico City Metropolitan Area (MCMA) during MILAGRO campaign. We found that this peak could be related to an important episodic emission event coming from Tizayuca region, northeast of the MCMA. Back trajectories analyses suggest that the emission event started in the early morning at 04:00 LST and lasted for about 9 hours. The estimated emission rate is high, about 2 kg s-1. This finding suggests the possibility of 'overlooked' emission sources in Tizayuca region that could influence the air quality of the MCMA. This further motivated us to study the cement plants, including those in the State of Hidalgo and the State of Mexico. We found that they can also contribute SO2 in the NE region of the basin, at the suburban supersite and that at some monitoring stations; their contribution can be even higher than from the Tula Industrial Complex (TIC). The contribution of TIC to regional ozone levels is also estimated. The model suggests low contribution to the MCMA and slightly higher contribution at the suburban and rural supersites. However, the contribution could be high in the upper northwest region of the basin and in the southwest and south-southeast regions of the State of Hidalgo. In addition, a first estimate of the potential contribution from flaring activities to regional ozone levels is presented. Results suggest that part of the total regional ozone from TIC-generated precursors could be related to flaring activities.

  2. BIOMASS AS AN ALTERNATIVE SOURCE OF ENERGY IN INDIA

    Directory of Open Access Journals (Sweden)

    DEEPAK PALIWAL,

    2010-10-01

    Full Text Available The fossil fuel is a main source of energy for generation of electricity in India. Overall, about 80% of greenhouse gas (GHS emissions are related to the production and use of energy, and particularly, burning of fossils fuels. The environmental problems are associated with the generation of conventional sources of energy.The Kyoto protocol has established flexible mechanisms for developing countries to meet there GHG reduction commitment. Therefore, renewable source of energy is an alternative to conserve the natural resources and reduce the pollution burden. At present renewable sources of energy such as solar, wind, geothermal and hydropower provide small fraction of energy need. The most prevalent source is biomass, which accounts around 12% of total energy requirement. This source of energy includes wood, logging waste, sawdust, animal dung and vegetables consisting of grass, leaves, grass residues and agricultural waste. The biomass is abundant in nature which can be trapped as source of energy for generation of electricity for the rural as well as urban population. The technology needs to be developed for use of biomass as a source of energy. This paperdiscusses about its prospects in Asia and particularly in India. The recent developments and projects in India are discussed. A note on pollution control strategies has also been added.

  3. Gamma-Ray Burst Afterglows with Energy Injection: Homogeneous VersusWind External Media

    Institute of Scientific and Technical Information of China (English)

    王伟; 戴子高

    2001-01-01

    Assuming an adiabatic evolution of a gamma-ray burst (GRB) fireball interacting with an external medium,we calculate the hydrodynamics of the fireball with an energy injection from a strongly magnetic millisecond pulsar through magnetic dipole radiation, and obtain the light curve of the optical afterglow from the fireball by synchrotron radiation. The results are given both for an homogeneous external medium and for a wind ejected by GRB progenitor. Our calculations are also available in both ultra-relativistic and non-relativistic phases.Furthermore, the observed R-band light curve of GRB000301C can be well fitted in our model, which might provide a probe of the properties of GRB progenitors.

  4. Energy harvesting through charged nanochannels using external flows of different salt concentrations

    Science.gov (United States)

    Chanda, Sourayon; Tsai, Peichun Amy

    2016-11-01

    Renewable electricity may be generated by mixing of two solutions of different salt concentrations through charged nanochannels or pores, by leveraging ion-selective effect of the nano-confinements. We numerically investigate such a continuous power generation system using reverse electrodialysis (RED) with external flows. In the simulation model, two reservoirs are connected using a nanochannel of constant surface charge density. Solutions of high and low concentrations flow through the two reservoirs at a constant velocity. We examine the effects of (salt) concentration gradients and nanochannel dimensions on the power generation. Moreover, the effect of external flow velocity on the process is analyzed. Our results show that the maximum surface charge density, open circuit voltage, channel resistance, and energy conversion efficiency of the process are significantly affected by the difference of the high and low concentrations and the nanochannel dimension ratio.

  5. On the global and regional potential of renewable energy sources

    NARCIS (Netherlands)

    Hoogwijk, Monique Maria

    2004-01-01

    In this thesis, the central research question is: what can be the contribution of renewable energy sources to the present and future world and regional energy supply system. The focus is on wind, solar PV and biomass energy (energy crops) for electricity generation. For the assessment of the economi

  6. On the global and regional potential of renewable energy sources

    NARCIS (Netherlands)

    Hoogwijk, Monique Maria

    2004-01-01

    In this thesis, the central research question is: what can be the contribution of renewable energy sources to the present and future world and regional energy supply system. The focus is on wind, solar PV and biomass energy (energy crops) for electricity generation. For the assessment of the economi

  7. Conservation – a new and efficient source of energy

    CSIR Research Space (South Africa)

    National Building Research Institute

    1981-09-01

    Full Text Available Energy is becoming increasingly expensive. Conservation can offset the increase in energy cost and can therefore be considered a new and can fairly inexpensive source of energy. The following article looks at the ways in which energy savings in both...

  8. Characteristics of the internal and external sources of the Mediterranean synoptic cyclones for the period 1956-2013

    Science.gov (United States)

    Almazroui, Mansour; Awad, Adel M.; Nazrul Islam, M.

    2017-07-01

    This paper investigates the main sources and features of the Mediterranean synoptic cyclones affecting the basin, using the cyclone tracks. The cyclones' tracks are identified using sea level pressure (SLP) from the NCEP/NCAR reanalysis data for the period 1956-2013. The identified cyclones are classified into two categories: basin affected and basin non-affected. Most of the basin-affected (non-affected) cyclones are internal (external), i.e., generated inside (outside) the Mediterranean basin. This study reveals four (five) main sources of internal (external) cyclones. These four (five) main sources generated about 63.76% (57.25%) of the internal (external) cyclones. Seasonal analysis shows that most of the basin-affected internal (external) cyclones were generated in the winter (spring) season. The lowest number of cyclones were found in the summer. Moreover, the synoptic study of the atmospheric systems accompanied the highest- and lowest-generated years demonstrates that the deepening of the north Europe cyclones and the relative positions of Azores- and Siberian-high systems represent the important factors that influence the number of internal cyclones. Essential factors influencing the external cyclones are the strength of the maximum upper wind, Azores high, Siberian high, and orientations of their ridges.

  9. Nuclear fission sustainability with subcritical reactors driven by external neutron sources

    Energy Technology Data Exchange (ETDEWEB)

    Lafuente, A., E-mail: anlafuente@etsii.upm.es [ETSII-UPM, c/Jose Gutierrez Abascal, 2, 28006 Madrid (Spain); Piera, M. [ETSII:UNED, c/Juan del Rosal, 12, 28040 Madrid (Spain)

    2011-04-15

    Although nuclear breeder reactors are a promising way to enhance the potential energy currently retrievable from the Uranium reserves, they still have disadvantages because of their safety features (i.e. poor stabilizing mechanisms) and the security of their fuel cycle (diversion of Pu for non-civilian purposes). Loading natural nuclear fuels to a reactor and completely burning them without reprocessing would be ideal, however, this is not possible in critical reactors due to the limitations imposed by the maximum achievable burn-up. An alternative option to attain very high percentages of nuclear natural materials exploitation, while meeting other objectives of Nuclear Sustainability, could consist of using externally-driven subcritical reactors to reach the desired high burn-ups (of the order of 30% and more) without reprocessing. Such scheme would lead to an efficient exploitation of the available raw material, without any risk of proliferation. Exploring this type of reactor concept, this paper analyzes the different ways to accomplish this goal while identifying potential setbacks.

  10. Key Generation Using External Source Excitation: Capacity, Reliability, and Secrecy Exponent

    CERN Document Server

    Chou, Tzu-Han; Sayeed, Akbar M

    2011-01-01

    We study the fundamental limits to secret key generation from an excited distributed source (EDS). In an EDS a pair of terminals observe dependent sources of randomness excited by a pre-arranged signal. We first determine the secret key capacity for such systems with one-way public messaging. We then characterize a tradeoff between the secret key rate and exponential bounds on the probability of key agreement failure and on the secrecy of the key generated. We find that there is a fundamental tradeoff between reliability and secrecy. We then explore this framework within the context of reciprocal wireless channels. In this setting, the users transmit pre-arranged excitation signals to each other. When the fading is Rayleigh, the observations of the users are jointly Gaussian sources. We show that an on-off excitation signal with an SNR-dependent duty cycle achieves the secret key capacity of this system. Furthermore, we characterize a fundamental metric -- minimum energy per key bit for reliable key generatio...

  11. Energy Efficiency and Importance of Renewable Energy Sources in Latvia

    Science.gov (United States)

    Skapare, I.; Kreslins, A.

    2007-10-01

    The main goal of Latvian energy policy is to ensure safe and environmentally friendly long-term energy supply at cost-effective prices, contributing to enhance competitiveness, and to ensure safe energy transit. The Latvian Parliament approved an Energy Efficiency Strategy in 2000. Its objective is to decrease energy consumption per unit of GDP by 25% by 2010. Awareness raising, implementation of standards and economic incentives for self financing are the main instruments to increase energy efficiency, mentioned in the strategy. Latvia, as many other European Union member states, is dependent on the import of primary energy resources. The Latvian Renewable Energy strategy is still under development. The only recent study on RES was developed in the framework of a PHARE program in year 2000: "Renewable energy resource program", where three main objectives for a future RES strategy were proposed: 1. To increase the use of wood waste and low value wood and forest residues. 2. To improve efficiency of combustion technologies and to replace outdated plants. 3. To increase the use of renewables in Combined Heat and Power plants (CHP). Through the Renewable Energy and Energy Efficiency Partnership, partners will develop a set of new shared activities, and coordinate and strengthen existing efforts in this area.

  12. California energy approach: from conventional to alternative energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Varanini, E.E. III

    1981-08-01

    The paper outlines the work of a State Government Agency, the California Energy Commission, which is now completing its major analytical task - forecasting California's future energy demand five, ten, and twenty years hence and formulating an optimal state strategy for energy production and conservation. The approach of the Commission was to study, in depth, the evolution of the demand of each category of end users. Supplemented by a realistic assessment of the impact of various conservation measures and by extensive discussions with different groups of concerned citizens, the Commission's approach produced much lower and quite manageable estimates of future energy demand. In devising an energy-supply strategy, the Commission postulated a mix of conventional and alternative energy technologies of proven practicability and diverse lead times. Providing such latitude in the choice of energy options increases the flexibility of the state's strategy to cope with possible unforeseen developments.

  13. Policy Enabling Environment for Corporate Renewable Energy Sourcing

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-09

    Interest in renewable energy (RE) procurement in new markets is on the rise. Corporations are increasing their commitments to procuring RE, motivated by an interest in using clean energy sources and reducing their energy expenses. Many large companies have facilities and supply chains in multiple countries, and are interested in procuring renewable energy in the grids where they use energy. The policy environment around the world plays a key role in shaping where and how corporations will invest in renewables. This fact sheet details findings from a recent 21st Century Power Partnership report, Policies to Enable Corporate Renewable Energy Sourcing Internationally.

  14. Noninvasive deep brain stimulation using focused energy sources

    NARCIS (Netherlands)

    Sierra, C. V. Rizzo

    2010-01-01

    A non-invasive methodological possibility for brain stimulation through the simultaneous use of an external energy beam and an existing brain imaging system such as functional magnetic resonance imaging (fMRI) is herein proposed; the main advantage is to confine the stimulation into a single brain a

  15. OVERVIEW OF THE ACTIVITIES OF THE NUCLEAR ENERGY AGENCY WORKING GROUP ON EXTERNAL EVENTS

    Energy Technology Data Exchange (ETDEWEB)

    Nakoski, John A.; Smith, Curtis L.; Kim, Min Kyu

    2016-10-01

    The Orgranisation for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) has established a Working Group on External Events (WGEV) that provides a forum for subject matter experts from the nuclear industry and regulators to improve the understanding and treatment of external hazards that would support the continued safety performance of nuclear installations, and improve the effectiveness of regulatory practices, in NEA member countries. This report provides a description of the ongoing work of the WGEV. The work of the WGEV includes the collection of information and conducting a workshop on severe weather and storm surge that brought together a diverse group of subject matter experts to identify commendable practices related to the treatment of severe weather and storm surge consideration in regulatory and operational decision-making. Other work of the WGEV includes looking at science-based screening of external events that are factored into decisions on the safe operation of nuclear facilities; and identification of commendable practices and knowledge gaps on riverine flooding.

  16. Savings Potential of ENERGY STAR(R) External Power Adapters andBattery Chargers

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Carrie; Korn, David; Sanchez, Marla

    2007-02-28

    External power adapters may lose 10 to 70 percent of theenergy they consume, dissipated as heat rather than converted into usefulenergy. Battery charging systems have more avenues for losses: inaddition to power conversion losses, power is consumed by the chargingcircuitry, and additional power may be needed after the battery is fullcharged to balance self-discharge. In 2005, the Environmental ProtectionAgency launched a new ENERGY STAR(R) label for external power supplies(EPSs) that convert line-voltage AC electricity into low-voltage DCelectricity for certain electronic devices. The specification includedpower supplies for products with battery charging functions (e.g. laptopsand cell phones), but excluded others. In January 2006, a separatespecification was issued for battery charging systems contained primarilyin small household appliances and power tools. In addition to the ENERGYSTAR(R) label, the state of California will implement minimum energyperformance standards for EPSs in 2007, and similar standards for EPSsand battery chargers are in development at the national level.Many of theproducts covered by these policies use relatively little power and havemodest per-unit savings potential compared to conventional energyefficiency targets. But with an estimated 1.5 billion adapters and 230million battery charging systems in use in the United States, theaggregate savings potential is quite high. This paper presents estimatesof the savings potential for external power adapters and battery chargingsystems through 2025.

  17. RENEWABLE ENERGY SOURCES IN POLAND - CONDITIONS AND POSSIBILITES OF DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    Gawlik, L.; Mokrzycki, E.; Ney, R.

    2007-07-01

    The paper describes the state of the art in renewable energy sources development. The obligation resulting from the membership of Poland in the European Union as well as from other international agreements in the scope of renewable energy sources development are described. The production of electricity, heat and biofuels in Poland is given and the perspectives of development of particular renewable energy sources in Poland are discussed in the view of potential reserves and other constrains. The economic aspects of renewable energy technologies are shown. The environmental pros and cons of biomass energy development are described. Arguments for development of renewable energy sources use are stated: the decrease of dependence from primary energy sources, the decrease the emission of green house gases and the recovery of agricultural regions of the country. In conclusion it is stated that the significance of renewable energy sources in Polish conditions is constrained to local societies. Their development should be adjusted to conditions predominating in a given region and that wider consumption of renewable energy sources should develop in conformity with sustainable development, so it is necessary to reach agreement between local societies, institutions dealing with environment protection and representatives of power sector. (auth)

  18. Analysis of Different Methods for Computing Source Energy in the Context of Zero Energy Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Torcellini, Paul A.; Bonnema, Eric; Goldwasser, David; Pless, Shanti

    2016-08-26

    Building energy consumption can only be measured at the site or at the point of utility interconnection with a building. Often, to evaluate the total energy impact, this site-based energy consumption is translated into source energy, that is, the energy at the point of fuel extraction. Consistent with this approach, the U.S. Department of Energy's (DOE) definition of zero energy buildings uses source energy as the metric to account for energy losses from the extraction, transformation, and delivery of energy. Other organizations, as well, use source energy to characterize the energy impacts. Four methods of making the conversion from site energy to source energy were investigated in the context of the DOE definition of zero energy buildings. These methods were evaluated based on three guiding principles--improve energy efficiency, reduce and stabilize power demand, and use power from nonrenewable energy sources as efficiently as possible. This study examines relative trends between strategies as they are implemented on very low-energy buildings to achieve zero energy. A typical office building was modeled and variations to this model performed. The photovoltaic output that was required to create a zero energy building was calculated. Trends were examined with these variations to study the impacts of the calculation method on the building's ability to achieve zero energy status. The paper will highlight the different methods and give conclusions on the advantages and disadvantages of the methods studied.

  19. The pattern of Campylobacter contamination on broiler farms; external and internal sources.

    Science.gov (United States)

    Battersby, T; Whyte, P; Bolton, D J

    2016-04-01

    The aim of this study was to apply the most sensitive molecular techniques in combination with culture-based methods to characterize broiler farms in terms of the timeline ('appearance' and 'pattern') of Campylobacter contamination prior to and post detection in the birds. Faecal and environmental samples were collected from three broiler farms (two flocks per farm). Real-time PCR was used to test for the presence of Campylobacter. Culture-based methods (enrichment and direct plating) were also applied and isolates were subject to a range of confirmatory tests before speciation (multiplex PCR). All flocks were colonized by Campylobacter before first thin and a similar pattern of Campylobacter contamination was observed; (day -1) a range of external and internal samples real-time PCR positive but culture negative; (day 0) chicks negative; (6-9 days pre-detection in the birds) internal samples (feeders, drinkers, barrier and/or bird weigh) culture positive and (post broiler infection) increasing concentrations of Campylobacter in internal samples but also on the tarmac apron and anteroom. It was concluded that; (i) vertical transmission did not occur; (ii) the environment was a potential source of Campylobacter; (iii) testing areas frequented by all birds (e.g. feeders and drinkers), may offer an opportunity for early Campylobacter detection and (iv) once the broilers are infected with Campylobacter, these bacteria are spread from the birds, through the anteroom to the areas surrounding the broiler house, highlighting the need for improved biosecurity. This study has established the pattern of Campylobacter contamination on broiler farms, identified an early detection opportunity, highlighted the need to better understand the role of viable but nonculturable Campylobacter in the ecology of Campylobacter on broiler farms and demonstrated the need for improved biosecurity to prevent the spread of Campylobacter from within the house to the surrounding environment.

  20. Intermediate energy light sources and the SSRF project

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Advances in insertion device technology, top-up operation and superconducting RF cavities make it possible to generate high brightness X-ray with intermediate energy light sources, which leads a new trend in designing and constructing third generation light sources around the world. The development status and the remarkable technical features of intermediate energy light sources are reviewed, and the main SSRF properties are described in this paper.

  1. United States and world energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Berg, L.L.; Baird, L.M.; Varanini, E.E. III (eds.)

    1982-01-01

    This volume examines the economic, political, and social implications of the oil-dependence dilemma facing the United States. Most of the contributors are energy consultants in the public or private sector. Their analyses of the changing oil situation and its impact on other energy policies reflect either an international, national, or regional perspective with a unique combination of pragmatic insights and academic analyses of these complex issues. While examining the various aspects of the energy dependence dilemma presented here, one critical theme will probably recur to the reader. That is, given the inadequate nature of the US response to the 1973 and 1979 shortfalls in foreign oil supplies, how will we manage the projected future shortages in foreign oil supplies. The 18 papers of this volume were presented at a conference at Los Angeles in July 1980 and cosponsored by the University of Southern California and the California Energy Commission; a separate abstract was prepared for each paper. See also EAPA 7:3231 and Energy Research Abstracts (ERA) 6:18036.

  2. Using Ground Source Heat Pumps for Renewable Energy

    Directory of Open Access Journals (Sweden)

    Xhevat BERISHA

    2017-04-01

    Full Text Available This paper provides background information on the current energy supply, energy demand, and energy sources in Kosovo. Moreover, it presents the country‟s current level of applying alternative energy sources. Additionally, this paper focuses on geothermal energy as a renewable energy resource with the potential to contribute to a sustainable use of resources to meet renewable energy and energy efficiency requirements of the European Union (EU, “EU 20 20 by 2020” policy. Hence, a careful analysis is included on how to approach the aforementioned targets through investments in geothermal energy through providing an energy consumption forecast and analysing geothermal energy projects in Europe and specifically in Kosovo. This paper carefully represents the potential usage of geothermal energy in Kosovo, renewable energy source targets, and it addresses the importance of laws, regulations, and reports regarding the utilization of this type of energy. Economic and environmental implications of investing in geothermal energy - geothermal heat pumps for the case of International Village are additionally analysed. Lastly, recommendations and conclusions, for future actions, are derived and addressed to relevant stakeholders, primarily policy-makers, and government representatives.

  3. Potential Energy Sources Pose Mining Problem

    Science.gov (United States)

    Chemical and Engineering News, 1974

    1974-01-01

    Summarizes the discussions of a Division of Industrial and Engineering Chemistry symposium on solids handling for synthetic fuels production. Included is a description of technical difficulties with the use of coal seams and deposits of oil shale and oil sand as potential sources of fuel. (CC)

  4. Carbon and Energy Sources of Mycorrhizal Fungi

    NARCIS (Netherlands)

    Kuijper, Thomas

    2017-01-01

    It has been debated whether ectomycorrhizal fungi have retained saprotrophic capabilities and whether that allows them to obtain carbon, as implied by the alternate carbon source hypothesis, or to obtain nitrogen and phosphorus, as implied by the nutrient mining through priming hypothesis. This

  5. AGNs and microquasars as high energy gamma-ray sources

    CERN Document Server

    Paredes, J M

    2004-01-01

    The extragalactic analogs of the microquasars, the quasars, are strong gamma-ray emitters at GeV energies. It is expected that microquasars are also gamma-ray sources, because of the analogy with quasars and because theoretical models predict the high-energy emission. There are two microquasars that appear as the possible counterparts for two unidentified high-energy gamma-ray sources.

  6. Fuels for transportation derived from renewable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Schindler, J.; Weindorf, W.

    2001-07-01

    There are two main reasons for introducing renewable energy sources into the transportation sector: global warming on the one hand and the imminent end of cheap oil on the other. The future use of renewable energy sources for tranportation is the only sustainable solution that protects the climate and ensures energy supply - especially it is the only conceivable way to satisfy the demand for mobility of the people in the developing countries.

  7. Decarbonizing electricity generation with intermittent sources of energy

    OpenAIRE

    2015-01-01

    We examine the impact of public policies that aim to decarbonate electricity production by replacing fossil fuel energy by intermittent renewable sources, namely wind and solar power. We consider a model of energy investment and production with two sources of energy: one is clean but intermittent (e.g. wind), whereas the other one is reliable but polluting (e.g. coal). A carbon tax decreases electricity production while simultaneously increasing investment in wind power. This tax may however ...

  8. External electric field effect on exciton binding energy in InGaAsP/InP cylindrical quantum wires

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Hailong, E-mail: hlwang@mail.qfnu.edu.cn [College of Physics and Engineering, Qufu Normal University, Qufu 273165 (China); Wang, Wenjuan [College of Physics and Engineering, Qufu Normal University, Qufu 273165 (China); Gong, Qian; Wang, Shumin [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China)

    2016-12-15

    Exciton binding energies in InGaAsP/InP cylindrical quantum wires are calculated through variational method under the framework of effective-mass envelope-function approximation. It is shown that the variation of exciton binding energy is highly dependent on radius of the wire, material composition and external electric field. Exciton binding energy is a non-monotonic function of wire radius. It increases until it reaches a maximum, and then decreases as the wire radius decreases. With the increase of In composition, the wire radius need increase to reach the maximum value of exciton binding energy. It is also found that the external electric field has little effect on exciton binding energy. However, the excitonic effect will be destroyed when external electric field is large enough. In addition, the Stark shift of exciton binding energy is also calculated.

  9. What makes Chinese firms to choose international external technology sources? An inquiry on internationalization, innovation and institutions

    DEFF Research Database (Denmark)

    Li-Ying, Jason; Wang, Yuandi

    2013-01-01

    our understanding of EMF competitiveness by adding a crucial link of EMFs strategic choice regarding the origin of technology sourcing from different origins and exploring the determinants for such a choice through the lens of internationalization, innovation and institutions (3 I’s) within a coherent......External technology sourcing from developed countries has been one of the most important vehicles by which emerging market firms (EMFs) sustain competiveness. Foreign advanced technologies offer EMFs opportunities to gain access to state-of-the-art technologies and upgrade their competitiveness....... However, we have also witnessed an emerging trend of external acquisition of technology by EMFs firms in both international and domestic markets. Why some EMFs are active in sourcing both domestic and international technologies instead of being significantly in favour of foreign technologies from...

  10. Performance Analysis of a Coal-Fired External Combustion Compressed Air Energy Storage System

    Directory of Open Access Journals (Sweden)

    Wenyi Liu

    2014-11-01

    Full Text Available Compressed air energy storage (CAES is one of the large-scale energy storage technologies utilized to provide effective power peak load shaving. In this paper, a coal-fired external combustion CAES, which only uses coal as fuel, is proposed. Unlike the traditional CAES, the combustion chamber is substituted with an external combustion heater in which high-pressure air is heated before entering turbines to expand in the proposed system. A thermodynamic analysis of the proposed CAES is conducted on the basis of the process simulation. The overall efficiency and the efficiency of electricity storage are 48.37% and 81.50%, respectively. Furthermore, the exergy analysis is then derived and forecasted, and the exergy efficiency of the proposed system is 47.22%. The results show that the proposed CAES has more performance advantages than Huntorf CAES (the first CAES plant in the world. Techno-economic analysis of the coal-fired CAES shows that the cost of electricity (COE is $106.33/MWh, which is relatively high in the rapidly developing power market. However, CAES will be more likely to be competitive if the power grid is improved and suitable geographical conditions for storage caverns are satisfied. This research provides a new approach for developing CAES in China.

  11. A new energy source originating from extra dimensions

    Institute of Scientific and Technical Information of China (English)

    Tao Bi-Xiu; Ji Shi-Yin; Li Fang-Qiong

    2004-01-01

    In this work the Einstein gravitational field equations and the Lichnerowicz boundary formalism in the extra dimensions are used to build up our black hole model from 6-dimensional space-time. From the internal stress-energy tensor the solutions with energy levels and semiclassical space-quantization are obtained, which combines with only one metric condition outside the defect. We show a new type of energy source, which originates from extra dimensions. A part of the energy source of quasi-stellar object (QSO) maybe come from extra dimensions in that way. The theoretical arithmetic upper limit is identical to that of the output energy of QSO.

  12. Prospective energy sources and their comparison with current supplies

    Science.gov (United States)

    Voitsekhovskii, B. V.

    1980-10-01

    The comparative physical-technical and economic characteristics of renewable energy sources are analyzed. The significant advantages of wind energy for future use over oil, gas, and coal are demonstrated. Costs of wind electrical energy are compared in the U.S., Denmark, and the U.S.S.R.

  13. Comparison of prospective energy sources with those in use

    Science.gov (United States)

    Voitsekhovskii, B. V.

    1981-03-01

    The comparative physical-technical and economic characteristics of renewable energy sources are analyzed. The significant advantages of wind energy for future use over oil, gas, and coal are demonstrated. Costs of wind electrical energy are compared in the U.S., Denmark, and the U.S.S.R.

  14. An exposition of the role of external base absorbent of solar energy with intelligent constructional structures with a view to reduction in energy use

    Directory of Open Access Journals (Sweden)

    Samira Sadeghi Kelishadi

    2014-07-01

    Full Text Available There is no doubt that one of the most important challenges facing engineers and designers ofarchitectural design and engineering is indeed the problem of energy. It is inline with this trend of thought that energy can be seen as a critical elementwith a view to the enhancement of mans economical and social welfare and it isin the sphere of construction engineering that the need arises for the use ofthe appropriate construction material which can best serve this vital aim ofenergy conservation by using renewable energy sources such as solar energy. Itis therefore a foregone conclusion that the more we are capable of using solarenergy we are helping to conserve our other energy sources and thus help toreduce our overall energy consumption. It is with this view in mind thatconstruction engineers and those working in building design have aimed at usingsystems that can manage energy consumption within their constructionalstructures, having arrived at a point where their building designs can actuallybe termed intelligent or smart constructionalstructures, whereby the system asa whole is capable of using solar energy instead of the traditional fossilfuels. Yet that which makes possible the use of solar energy more so today thanever before is the use of external ducts, which are installed in places mostexposed to sunlight, and have the capability of changing color and becominglighter or darker as the state of exposure calls for is the use of a certaintype of smart glass within the built structure, that makes possible the mostefficient use of sunlight entering the building, having the capability ofchanging color in correlation to the amount of sunlight received and becominglighter or darker appropriately, allowing that quantity of sunlight to enter thebuilding as is needed to counteract the greenhouse effect which causes anuncontrolled increase of temperature within the built structure, and thusallowing the most efficient use of solar energy in keeping

  15. Essentials of energy technology sources, transport, storage, conservation

    CERN Document Server

    Fricke, Jochen

    2013-01-01

    An in-depth understanding of energy technology, sources, conversion, storage, transport and conservation is crucial for developing a sustainable and economically viable energy infrastructure. This need, for example, is addressed in university courses with a special focus on the energy mix of renewable and depletable energy resources. Energy makes our lives comfortable, and the existence of amenities such as heaters, cars, warm water, household appliances and electrical light is characteristic for a developed economy. Supplying the industrial or individual energy consumer with energy 24 hours

  16. Ultra High Energy Cosmic Rays from Compact Sources

    CERN Document Server

    Fodor, Z

    2001-01-01

    The clustering of ultra high energy (above 10^20 eV) cosmic rays (UHECR) suggests that they might be emitted by compact sources. Statistical analysis of Dubovsky et al. (astro-ph/0001317) estimated the source density. We extend their analysis to give also the confidence intervals for the number of sources using a.) no assumptions on the relationship between clustered and unclustered events; b.) nontrivial distributions for the source intensities and energies; c.) the energy dependence of the propagation. We determine the probability that a proton created at a distance r with energy E arrives at earth above a threshold E_c. The observed 14 UHECR events above 10^20 eV with one doublet gives for the source densities 6.43_-6.05^+136*10^-3 Mpc^-3 (on the 68% confidence level). We present detailed results for future experiments with larger UHECRs statistics.

  17. Propagation of ultrahigh energy cosmic rays and compact sources

    CERN Document Server

    Fodor, Z

    2001-01-01

    The clustering of ultrahigh energy (>10^{20} eV) cosmic rays (UHECR) suggests that they might be emitted by compact sources. Statistical analysis (Dubovsky et al., 2000) estimated the source density. We extend their analysis to give also the confidence intervals (CI) for the source density using a.) no assumptions on the relationship between clustered and unclustered events; b.) nontrivial distributions for the source luminosities and energies; c.) the energy dependence of the propagation. We also determine the probability that a proton created at a distance r with energy E arrives at earth above a threshold E_c. Using this function one can determine the observed spectrum just by one numerical integration for any injection spectrum. The observed 14 UHECR events above 10^{20} eV with one doublet gives for the source densities 180_{-165}^{+2730}\\cdot 10^{-3} Mpc^{-3} (on the 68% confidence level).

  18. Isomer Energy Source for Space Propulsion Systems

    Science.gov (United States)

    2004-03-01

    Nuclear Thermal Rocket PBR Particle-Bed Reactor SNTP Space Nuclear Thermal Propulsion TIC Triggered Isomer Core TIHE Triggered Isomer Heat...energy in a nuclear thermal rocket (NTR) configuration. This includes study of the current state of triggered isomer research, an investigation of 4... thermal rocket this means that heat from the reactive core must be prevented from raising the temperature of the propellant prior to its release from

  19. Dependence of Interaction Free Energy between Solutes on an External Electrostatic Field

    Directory of Open Access Journals (Sweden)

    Pei-Kun Yang

    2013-07-01

    Full Text Available To explore the athermal effect of an external electrostatic field on the stabilities of protein conformations and the binding affinities of protein-protein/ligand interactions, the dependences of the polar and hydrophobic interactions on the external electrostatic field, −Eext, were studied using molecular dynamics (MD simulations. By decomposing Eext into, along, and perpendicular to the direction formed by the two solutes, the effect of Eext on the interactions between these two solutes can be estimated based on the effects from these two components. Eext was applied along the direction of the electric dipole formed by two solutes with opposite charges. The attractive interaction free energy between these two solutes decreased for solutes treated as point charges. In contrast, the attractive interaction free energy between these two solutes increased, as observed by MD simulations, for Eext = 40 or 60 MV/cm. Eext was applied perpendicular to the direction of the electric dipole formed by these two solutes. The attractive interaction free energy was increased for Eext = 100 MV/cm as a result of dielectric saturation. The force on the solutes along the direction of Eext computed from MD simulations was greater than that estimated from a continuum solvent in which the solutes were treated as point charges. To explore the hydrophobic interactions, Eext was applied to a water cluster containing two neutral solutes. The repulsive force between these solutes was decreased/increased for Eext along/perpendicular to the direction of the electric dipole formed by these two solutes.

  20. Energy-Efficient Sensing and Communication of Parallel Gaussian Sources

    CERN Document Server

    Liu, Xi; Erkip, Elza

    2012-01-01

    Energy efficiency is a key requirement in the design of wireless sensor networks. While most theoretical studies only account for the energy requirements of communication, the sensing process, which includes measurements and compression, can also consume comparable energy. In this paper, the problem of sensing and communicating parallel sources is studied by accounting for the cost of both communication and sensing. In the first formulation of the problem, the sensor has a separate energy budget for sensing and a rate budget for communication, while, in the second, it has a single energy budget for both tasks. Assuming that sources with larger variances have lower sensing costs, the optimal allocation of sensing energy and rate that minimizes the overall distortion is derived for the first problem. Moreover, structural results on the solution of the second problem are derived under the assumption that the sources with larger variances are transmitted on channels with lower noise. Closed-form solutions are als...

  1. Comparative study of energy saving light sources

    Energy Technology Data Exchange (ETDEWEB)

    Khan, N.; Abas, N. [Department of Electrical Engineering, Comsats Institute of Information technology, Park Road, Islamabad (Pakistan)

    2011-01-15

    Techno-economic performance comparison of compact fluorescent lamps (CFL) with light emitting diodes (LED), electrode less fluorescent lamps (EEFL), fluorescent tubes, incandescent bulbs, photovoltaic (PV) and fiber optic lighting systems was carried out in view of worsening power and energy crisis in Pakistan. Literature survey showed 23 W CFL, 21 W EEFL, 18 W fluorescent tube or 15 W LED lamps emit almost same quantity of luminous flux (lumens) as a standard 100 W incandescent lamp. All inclusive, operational costs of LED lamps were found 1.21, 1.62. 1.69, 6.46, 19.90 and 21.04 times lesser than fluorescent tubes, CFL, EEFL, incandescent bulbs, fiber optic solar lighting and PV systems, respectively. However, tubes, LED, CFL and EEFL lamps worsen electric power quality of low voltage networks due to high current harmonic distortions (THD) and poor power factors (PF). Fluorescent lamps emit UV and pollute environment by mercury and phosphors when broken or at end of their life cycle. Energy consumption, bio-effects, and environmental concerns prefer LED lamps over phosphor based lamps but power quality considerations prefer EEFL. CFL and EEFL manufacturers claim operating temperatures in range of -20 C < T{sub CFL} < 60 C and -30 C < T{sub CFL} < 50 C but CFL frequently damage in wet and damp locations. Costs of low THD and high PF CFL, EEFL and LED lamps may be five to ten times higher that high THD and low PF lamps. Choice of a lamp depends upon its current THD, PF, life span, energy consumption, efficiency, efficacy, color rendering index (CRI) and associated physical effects. This work proposes manufacturing and user level innovations to get rid of low PF problems. Keeping in view downside of phosphor based lamps our research concludes widespread adoption of LED lamps. Government and commercial buildings may consider full spectrum hybrid thermal photovoltaic and solar fiber optic illumination systems. (author)

  2. Analysis of Energy Efficiency in Dynamic Optical Networks Employing Solar Energy Sources

    DEFF Research Database (Denmark)

    Wang, Jiayuan; Fagertun, Anna Manolova; Ruepp, Sarah Renée

    2013-01-01

    The paper presents energy efficient routing in dynamic optical networks, where solar energy sources are employed for the network nodes. Different parameters are evaluated, including the number of nodes that have access to solar energy sources, the different maximum solar output power, traffic type...

  3. Natural gas: energy, environment, development and externalities; Gas natural: energia, meio-ambiente, desenvolvimento e externalidades

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Eduardo F. de [Universidade Salvador (UNIFACS), BA (Brazil)

    2010-07-01

    Natural gas is a major source of non-renewable energy in the Brazilian energy matrix, and the noticeable increase in demand for this energy. This can be checked with the expansion of investments in Brazil and in the state of Bahia for the various sectors. The environmental benefits of natural gas highlight the advantages of using this input to the other fossil fuels. This paper discusses the availability of natural gas in Brazil and how it occurs its participation in the national energy matrix. This issue of the vulnerability of the market by the conflict between the growing demand from various industries and the need for order of thermal. It indicates scenarios and future prospects, and limiting factors for their growth. (author)

  4. SWOT analysis of the renewable energy sources in Romania - case study: solar energy

    Science.gov (United States)

    Lupu, A. G.; Dumencu, A.; Atanasiu, M. V.; Panaite, C. E.; Dumitrașcu, Gh; Popescu, A.

    2016-08-01

    The evolution of energy sector worldwide triggered intense preoccupation on both finding alternative renewable energy sources and environmental issues. Romania is considered to have technological potential and geographical location suitable to renewable energy usage for electricity generation. But this high potential is not fully exploited in the context of policies and regulations adopted globally, and more specific, European Union (EU) environmental and energy strategies and legislation related to renewable energy sources. This SWOT analysis of solar energy source presents the state of the art, potential and future prospects for development of renewable energy in Romania. The analysis concluded that the development of solar energy sector in Romania depends largely on: viability of legislative framework on renewable energy sources, increased subsidies for solar R&D, simplified methodology of green certificates, and educating the public, investors, developers and decision-makers.

  5. Renewable energy made easy free energy from solar, wind, hydropower, and other alternative energy sources

    CERN Document Server

    Craddock, David

    2008-01-01

    Studies have shown that the average North American family will spend more than a quarter of a million dollars on energy in a lifetime. What many other countries, including Germany, Spain, France, Denmark, China, Brazil, and even Iceland, have realized is that there is a better way to power our homes, businesses, and cars by using renewable energy sources. Recently, the United States has begun to understand the importance of reducing its reliance on coal, natural gas, nuclear power, and hydropower plants, which comprise the majority of the nation's electricity, due to increasing oil prices.

  6. Energy sources and power plants; Energiequellen und Kraftwerke

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, Detlef [Helmut-Schmidt-Univ. / Univ. der Bundeswehr, Hamburg (Germany). Professur fuer Elektrische Energiesysteme; Schulz, Karen

    2013-07-01

    Energy is obtained from various energy sources (coal, petroleum, natural gas, nuclear fuels, wind energy, solar energy, hydro power, biomass, geothermal energy). These differ in each case with respect to their availability, methods of their production and the required power plant technologies. As technologies of the future fuel cells and nuclear fusion are traded. [German] Energie wird aus verschiedenen Energietraegern gewonnen (Kohle, Erdoel, Erdgas, Kernbrennstoffe, Windenergie, Solarenergie, Wasserkraft, Biomasse, Geothermie). Diese unterscheiden sich jeweils hinsichtlich ihrer Verfuegbarkeit, der Methoden ihrer Gewinnung und der benoetigten Kraftwerkstechnologien. Als Zukunftstechnologien werden Brennstoffzellen und Kernfusion gehandelt.

  7. Development of Electricity Generation from Renewable Energy Sources in Turkey

    Science.gov (United States)

    Kentel, E.

    2011-12-01

    Electricity is mainly produced from coal, natural gas and hydropower in Turkey. However, almost all the natural gas and high quality coal are imported. Thus, increasing the shares of both hydro and other renewables in energy supply is necessary to decrease dependency of the country on foreign sources. In 2008, the total installed capacity of Turkey was around 42000 MW and 66 % of this was from thermal sources. The remaining 33 % was from hydro, which leaves only one percent for the other renewable energy sources. The share of renewable energy in the energy budget of Turkey has increased in the last two decades; however, in 2008, only 17 % of the total electricity generation was realized from renewable sources most of which was hydro. According to State Hydraulic Works (SHW) which is the primary executive state agency responsible for the planning, operating and managing of Turkey's water resources, Turkey utilizes only around 35% of its economically viable hydro potential. The current situation clearly demonstrates the need for increasing the share of renewables in the energy budget. New laws, such as the Electricity Market Law, have been enacted and the following items were identified by the Ministry of Energy and Natural Resources of Turkey among primary energy policies and priorities: (i) decreasing dependency on foreign resources by prioritizing utilization of natural resources, (ii) increasing the share of renewable energy resources in the energy budget of Turkey; (iii) minimization of adverse environmental impacts of production and utilization of natural resources. The government's energy policy increased investments in renewable energy resources; however lack of a needed legal framework brought various environmental and social problems with this fast development. The development of the share of renewable resources in the energy budget, current government policy, and environmental concerns related with renewables, and ideas to improve the overall benefits of

  8. [Applications of GIS in biomass energy source research].

    Science.gov (United States)

    Su, Xian-Ming; Wang, Wu-Kui; Li, Yi-Wei; Sun, Wen-Xiang; Shi, Hai; Zhang, Da-Hong

    2010-03-01

    Biomass resources have the characteristics of widespread and dispersed distribution, which have close relations to the environment, climate, soil, and land use, etc. Geographic information system (GIS) has the functions of spatial analysis and the flexibility of integrating with other application models and algorithms, being of predominance to the biomass energy source research. This paper summarized the researches on the GIS applications in biomass energy source research, with the focus in the feasibility study of bioenergy development, assessment of biomass resources amount and distribution, layout of biomass exploitation and utilization, evaluation of gaseous emission from biomass burning, and biomass energy information system. Three perspectives of GIS applications in biomass energy source research were proposed, i. e., to enrich the data source, to improve the capacity on data processing and decision-support, and to generate the online proposal.

  9. Panchromatic spectral energy distributions of Herschel sources

    CERN Document Server

    Berta, S; Santini, P; Wuyts, S; Rosario, D; Brisbin, D; Cooray, A; Franceschini, A; Gruppioni, C; Hatziminaoglou, E; Hwang, H S; Floc'h, E Le; Magnelli, B; Nordon, R; Oliver, S; Page, M J; Popesso, P; Pozzetti, L; Pozzi, F; Riguccini, L; Rodighiero, G; Roseboom, I; Scott, Douglas; Symeonidis, M; Valtchanov, I; Viero, M; Wang, L

    2013-01-01

    (abridged) Far-infrared Herschel photometry from the PEP and HerMES programs is combined with ancillary datasets in the GOODS-N, GOODS-S, and COSMOS fields. Based on this rich dataset, we reproduce the restframe UV to FIR ten-colors distribution of galaxies using a superposition of multi-variate Gaussian modes. The median SED of each mode is then fitted with a modified version of the MAGPHYS code that combines stellar light, emission from dust heated by stars and a possible warm dust contribution heated by an AGN. The defined Gaussian grouping is also used to identify rare sources. The zoology of outliers includes Herschel-detected ellipticals, very blue z~1 Ly-break galaxies, quiescent spirals, and torus-dominated AGN with star formation. Out of these groups and outliers, a new template library is assembled, consisting of 32 SEDs describing the intrinsic scatter in the restframe UV-to-submm colors of infrared galaxies. This library is tested against L(IR) estimates with and without Herschel data included, an...

  10. Natural gas pyrolysis in double-walled reactor tubes using thermal plasma or concentrated solar radiation as external heating source

    Institute of Scientific and Technical Information of China (English)

    Stèphane Abanades; Stefania Tescari; Sylvain Rodat; Gilles Flamant

    2009-01-01

    The thermal pyrolysis of natural gas as a clean hydrogen production route is examined.The concept of a double-walled reactor tube is proposed and implemented.Preliminary experiments using an external plasma heating source are carded out to validate this concept.The results point out the efficient CH4 dissociation above 1850 K (CH4 conversion over 90%) and the key influence of the gas residence time.Simulations are performed to predict the conversion rate of CH4 at the reactor outlet,and are consistent with experimental tendencies.A solar reactor prototype featuring four independent double-walled tubes is then developed.The heat in high temperature process required for the endothermic reaction of natural gas pyrolysis is supplied by concentrated solar energy.The tubes are heated uniformly by radiation using the blackbody effect of a cavity-receiver absorbing the concentrated solar irradiation through a quartz window.The gas composition at the reactor outlet,the chemical conversion of CH4,and the yield to H2 are determined with respect to reaction temperature,inlet gas flow-rates,and feed gas composition.The longer the gas residence time,the higher the CH4 conversion and H2 yield,whereas the lower the amount of acetylene.A CH4 conversion of 99% and H2 yield of about 85% are measured at 1880 K with 30% CH4 in the feed gas (6 L/min injected and residence time of 18 ms).A temperature increase from 1870 K to 1970 K does not improve the H2 yield.

  11. Externalities - an analysis using the EU ExternE-results; Externaliteter - en analys utifraan EU:s ExternE-resultat

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-10-01

    The EU project ExternE quantified the externalities for the different energy technologies. In this work, the ExternE results are used in a MARKAL-analysis for the Nordic countries. The analysis does not go into detail, but gives some interesting indications: The external costs are not fully covered in the Nordic energy systems, the present taxes and charges are not high enough. The emissions from the energy systems would be strongly reduced, if taxes/environmental charges were set at the level ExternE calculate. The emissions from power production would be reduced most. Renewable energy sources and natural gas dominate the energy systems in the ExternE case.

  12. Perspectives of Use of Alternative Energy Sources in Air Transport

    Directory of Open Access Journals (Sweden)

    Luboš Socha

    2017-01-01

    Full Text Available The problem of environmental load is also reflected in air transport. Usage of fossil fuels, which are dominant nowadays, has a negative impact on the environment and also its resources are limited. Therefore, the article focuses on the prospective of use of other energy sources in aviation, such as alternative fuels (synthetic fuels, biofuels, alcohol, methane, hydrogen, solar energy and the use of fuel cells. Also, the paper briefly summarizes the approach of aircraft manufacturers to the use alternative sources.

  13. Constrained Maximum Likelihood Estimation for Model Calibration Using Summary-level Information from External Big Data Sources.

    Science.gov (United States)

    Chatterjee, Nilanjan; Chen, Yi-Hau; Maas, Paige; Carroll, Raymond J

    2016-03-01

    Information from various public and private data sources of extremely large sample sizes are now increasingly available for research purposes. Statistical methods are needed for utilizing information from such big data sources while analyzing data from individual studies that may collect more detailed information required for addressing specific hypotheses of interest. In this article, we consider the problem of building regression models based on individual-level data from an "internal" study while utilizing summary-level information, such as information on parameters for reduced models, from an "external" big data source. We identify a set of very general constraints that link internal and external models. These constraints are used to develop a framework for semiparametric maximum likelihood inference that allows the distribution of covariates to be estimated using either the internal sample or an external reference sample. We develop extensions for handling complex stratified sampling designs, such as case-control sampling, for the internal study. Asymptotic theory and variance estimators are developed for each case. We use simulation studies and a real data application to assess the performance of the proposed methods in contrast to the generalized regression (GR) calibration methodology that is popular in the sample survey literature.

  14. The importance of the different kinds of energy sources for energy future of Turkey

    Science.gov (United States)

    Kaplan, Yusuf Alper; Aladağ, Canan

    2016-11-01

    Nowadays, the need of energy has been increasing day by day with the population growth and the advancements of technology. In this study, the current state of nuclear, wind and solar energy on the worldwide has been generally investigated. The general assessments have been made based on Turkey's energy potential and the evaluation situation of this potential. The current political structures of countries are generally assessed and under this policy, the last situation and the latest implemented innovations are given. Turkey's energy demand is constantly increasing and Turkey is a country that needs to energy imports. This is a need for new energy sources to meet the growing need for energy. Nuclear, wind and solar energy are the new sources of energy to the fore in our country recently. In this study is given general information on the usage of energy sources of making and some deficiencies were been emphasized by political considerations in this regard.

  15. Opportunities for renewable energy sources in Central Asia countries

    Energy Technology Data Exchange (ETDEWEB)

    Obozov, A.J. [Project KUN (Kyrgyzstan); Loscutoff, W.V. [National Renewable Energy Lab., Golden, CO (United States)

    1998-07-01

    This report presents an overview of the state of conventional energy sources and the potential for development of renewable energy sources in the Central Asia countries of Kazakhstan, Uzbekistan, Kyrgyzstan, Turkmenistan, and Tajikistan. The region has a population of about 50 million in an area of more than four million square kilometers. The per capita gross internal product is more than $2,500, although the economy has been declining the past five years. The area has substantial coal, oil, uranium, and natural gas reserves, although they are not distributed equally among the five countries. Energy production is such that the countries do not have to rely heavily on imports. One of the problems in Central Asia is that the energy prices are substantially below the world prices. This is a factor in development of renewable energy sources. The primary renewable energy resources available are wind in Kazakhstan, solar in the entire region, biomass in Kyrgyzstan, and micro-hydropower stations in Kazakhstan and Kyrgyzstan. All of these have the potential to provide a significant amount of the required energy for the region. However, all of the countries have an abundance of various renewable energy resources. To effectively use these resources, however, a number of barriers to their development and commercialization must be overcome. These include low prices of conventional energy sources, absence of legislative support, lack of financing for new technologies, and lack of awareness of renewable energy sources by the population. A number of specific actions are proposed to overcome these barriers. These include establishment of a Central Asia coordinating council for renewable energy, development of a regional renewable energy program, and setting up a number of large demonstration projects. 16 figs.

  16. On the contribution of external cost calculations to energy system governance: the case of a potential large-scale nuclear accident

    NARCIS (Netherlands)

    Laes, E.; Meskens, G.; van der Sluijs, J.P.

    2011-01-01

    The European Commission's ExternE Project has made major advances in the quantification of external costs of electricity. Although some impacts cannot be valued, important conclusions are possible. This paper outlines some provisional implications for energy policy. External costs are technology dep

  17. 76 FR 38550 - Technical Standard DOE-STD-1095-2011, Department of Energy Laboratory Accreditation for External...

    Science.gov (United States)

    2011-07-01

    ...The Department of Energy (DOE or the Department) is issuing Technical Standard DOE-STD-1095-2011, Department of Energy Laboratory Accreditation for External Dosimetry, January 2011. This standard provides updated technical criteria for performance testing for, and provides a requirement for onsite quality assurance assessments of, whole body and extremity dosimetry programs in use at DOE......

  18. Can external lateral stabilization reduce the energy cost of walking in persons with a lower limb amputation?

    NARCIS (Netherlands)

    IJmker, T.; Noten, S.; Lamoth, C. J.; Beek, P. J.; van der Woude, L. H. V.; Houdijk, H.

    2014-01-01

    The aim of this study was to examine whether impaired balance control is partly responsible for the increased energy cost of walking in persons with a lower limb amputation (LLA). Previous studies used external lateral stabilization to evaluate the energy cost for balance control; this caused a decr

  19. Power Electronics as Efficient Interface of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Chen, Zhe; Kjær, Søren Bækhøj

    2004-01-01

    The global electrical energy consumption is steadily rising and consequently there is a demand to increase the power generation capacity. A significant percentage of the required capacity increase can be based on renewable energy sources. Wind turbine technology, as the most cost effective...... renewable energy conversion system, will play an important part in our future energy supply. But other sources like microturbines, photovoltaics and fuel cell systems may also be serious contributor to the power supply. Characteristically, power electronics will be an efficient and important interface...... to the grid and this paper will first briefly discuss three different alternative/ renewable energy sources. Next, various configurations of the wind turbine technology are presented, as this technology seems to be most developed and cost-effective. Finally, the developments and requirements from the grid...

  20. Renewable energy sources offering flexibility through electricity markets

    DEFF Research Database (Denmark)

    Soares, Tiago

    All over the world, penetration of renewable energy sources in power systems has been increasing, creating new challenges in electricity markets and for operation and management of power systems, since power production from these resources is by nature uncertain and variable. New methods and tools...... governments. Renewable energy sources are characterized by their uncertain and variable production that limits the current operation and management tools of the power system. Nevertheless, recent developments of renewable energy technologies enable these resources to provide, to some extent, ancillary...... of future energy and reserve markets. Towards a power system based on distributed energy resources, mainly comprising renewable sources, new operation and management of distribution systems needs to be thought of. In fact, the existing passive distribution grid management does not provide the flexibility...

  1. High-energy neutrinos from sources in clusters of galaxies

    CERN Document Server

    Fang, Ke

    2016-01-01

    High-energy cosmic rays can be accelerated in clusters of galaxies, by mega-parsec scale shocks induced by accretion of gas during the formation of large-scale structure, or by powerful sources harbored in clusters. Once accelerated, the highest energy particles leave the cluster via almost rectilinear trajectories, while lower energy ones can be confined by the cluster magnetic field up to cosmological time and interact with the intracluster gas. Using a realistic model of the baryon distribution and the turbulent magnetic field in clusters, we studied the propagation and hadronic interaction of high-energy protons in the intracluster medium. We report the cumulative cosmic ray and neutrino spectra generated by galaxy clusters including embedded sources, and demonstrate that clusters can contribute a significant fraction of the observed IceCube neutrinos above 30 TeV while remaining undetected in high-energy cosmic rays and $\\gamma$ rays for reasonable choices of parameters and source scenarios.

  2. Field biomass as global energy source

    Directory of Open Access Journals (Sweden)

    K. HAKALA

    2008-12-01

    Full Text Available Current (1997–2006 and future (2050 global field biomass bioenergy potential was estimated based on FAO (2009 production statistics and estimations of climate change impacts on agriculture according to emission scenario B1 of IPCC. The annual energy potential of raw biomass obtained from crop residues and bioenergy crops cultivated in fields set aside from food production is at present 122–133 EJ, 86–93 EJ or 47–50 EJ, when a vegetarian, moderate or affluent diet is followed, respectively. In 2050, with changes in climate and increases in population, field bioenergy production potential could be 101–110 EJ, 57–61 EJ and 44–47 EJ, following equivalent diets. Of the potential field bioenergy production, 39–42 EJ now and 38–41 EJ in 2050 would derive from crop residues. The residue potential depends, however, on local climate, and may be considerably lower than the technically harvestable potential, when soil quality and sustainable development are considered. Arable land could be used for bioenergy crops, particularly in Australia, South and Central America and the USA. If crop production technology was improved in areas where environmental conditions allow more efficient food production, such as the former Soviet Union, large areas in Europe could also produce bioenergy in set aside fields. The realistic potential and sustainability of field bioenergy production are discussed.;

  3. Engineering Strategies and Methods for Avoiding Air-Quality Externalities: Dispersion Modeling, Home Energy Conservation, and Scenario Planning

    Science.gov (United States)

    Knox, Andrew James

    Energy conservation can improve air quality by reducing emissions from fuel combustion. The human health value retained through better air quality can then offset the cost of energy conservation. Through this thesis' innovative yet widely-accessible combination of air pollution dispersion modeling and atmospheric chemistry, it is estimated that the health value retained by avoiding emissions from Ontario's former coal-fired generating stations is 5.74/MWh (using an upper-bound value of 265,000 per year of life lost). This value is combined with energy modeling of homes in the first-ever assessment of the air-quality health benefits of low-energy buildings. It is shown that avoided health damages can equal 7% of additional construction costs of energy efficient buildings in Ontario. At 7%, health savings are a significant item in the cost analysis of efficient buildings. Looking to energy efficiency in the context of likely future low-resource natural gas scenarios, building efficient buildings today is shown to be more economically efficient than any building retrofit option. Considering future natural gas scarcity in the context of Ontario's Long-Term Energy Plan reveals that Ontario may be forced to return to coal-fired electricity. Projected coal use would result in externalities greater than $600 million/year; 80% more than air-quality externalities from Ontario's electricity in 1985. Radically aggressive investment in electricity conservation (75% reduction per capita by 2075) is one promising path forward that keeps air-quality externalities below 1985 levels. Non-health externalities are an additional concern, the quantification, and ultimately monetization, of which could be practical using emerging air pollution monitoring technologies. Energy, conservation, energy planning, and energy's externalities form a complex situation in which today's decisions are critical to a successful future. It is clear that reducing the demand for energy is essential and

  4. Study and Analysis of an Intelligent Microgrid Energy Management Solution with Distributed Energy Sources

    Directory of Open Access Journals (Sweden)

    Swaminathan Ganesan

    2017-09-01

    Full Text Available In this paper, a robust energy management solution which will facilitate the optimum and economic control of energy flows throughout a microgrid network is proposed. The increased penetration of renewable energy sources is highly intermittent in nature; the proposed solution demonstrates highly efficient energy management. This study enables precise management of power flows by forecasting of renewable energy generation, estimating the availability of energy at storage batteries, and invoking the appropriate mode of operation, based on the load demand to achieve efficient and economic operation. The predefined mode of operation is derived out of an expert rule set and schedules the load and distributed energy sources along with utility grid.

  5. CONCEPT OF THE MINIMUM ENERGY PASSENGER CAR WITH USE OF UNCONVENTIONAL ENERGY SOURCES

    National Research Council Canada - National Science Library

    V. A. Gabrinets; I. V. Tytarenko

    2014-01-01

    Purpose. The paper is aimed to consider the concept of creation of the minimum energy passenger car with use of nonconventional energy sources and the walls that have enhanced thermal insulation properties. Мethodology...

  6. Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources

    National Research Council Canada - National Science Library

    Isidore Chukwunweike Ezema; Abiodun O Olotuah; Olabosipo I Fagbenle

    2016-01-01

      Even though domestic energy can be from either renewable or non-renewable sources, the former is preferred because of its role in reducing both the operational energy intensity and carbon footprint...

  7. Renewable energy sources in Europe; Erneuerbare Energien in Europa

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Thorsten; Kahl, Hartmut (eds.)

    2015-07-01

    The book on renewable energy sources in Europe includes contributions on the following issues: Europe's energy and climate policy on the crossroad; possible promotion of renewable energy in Europe; regulation and innovations in a multi-level system - European energy and climate protection legislation - freedom of action for the member states; lessons learned - in the implementation of the European renewable energy guideline; Options for the development of the renewable energy guideline; status and development of the legal system of the energy domestic market; actual developments in the legislation of the EuGH on the compatibility of green electricity promotion systems with free movement on goods; Europe without critical power situations; prerequisites and consequences of a European electricity market coupling; selected grants of the EU commission for green energy promotion; assistance guidelines of the EU commission for energy and environment purposes.

  8. Voltage sag source location based on instantaneous energy detection

    DEFF Research Database (Denmark)

    Chen, Zhe; Xinzhou, Dong; Wei, Kong

    2007-01-01

    Voltage sag is the major power quality problem, which could disrupt the operation of sensitive equipment. This paper presents the applications of instantaneous energy direction for voltage sag source detection. Simulations have been performed to provide the analysis for system with distributed ge...... generation units. The studies show that the presented method can effectively detect the location of the voltage sag source....

  9. Biogas as a source of rural energy

    Energy Technology Data Exchange (ETDEWEB)

    Kalia, A.K.

    2000-01-01

    The hilly state of Himachal Pradesh, with nearly 2.15 million cattle and 0.7 million buffalo, has the potential to install 0.64 million biogas plants of 1 m{sup 3} size. These plants could generate nearly 4.90 x 105 m{sup 3} of biogas, equivalent to 3.07 x 10{sup 5} L kerosene per day to meet domestic energy needs of nearly one-fourth of its rural population. During 1982--1998, only 12.8% of this potential was achieved. The percent of possible potential achieved in plant installations in 12 districts of this state, namely, Bilaspur, Chamba, Hamirpur, Kangra, Kinnaur, Kullu, Lahul-Spiti, Mandi, Shimla, Sirmour, Solan, and Una, are 35.35, 1.70, 20.96, 8.67, 1.54, 6.96, 0.00, 18.49, 3.84, 8.521, 18.29, and 13.23%, respectively. There is a need to strengthen biogas promotion, particularly in the districts of Kangra, Mandi, Solan, and Una, which range from mid-hill to low-hill terrain and which have large potential due to high concentration of bovine population. Increased costs and comparatively low rate of subsidies has resulted in a decreasing rate of plant installation annually, from 3,500 during 1987--1992 to fewer than 1,200 during 1995--1998. The percentage of functioning plants was 82% in 1987--1988 but has decreased to 63%. To ensure proper installation and functionality of plants, the authors discuss the needed improvements in the biogas promotion program.

  10. Global Multivariable Control of Permanent Magnet Synchronous Motor for Mechanical Elastic Energy Storage System under Multiclass Nonharmonic External Disturbances

    Directory of Open Access Journals (Sweden)

    Yang Yu

    2014-01-01

    Full Text Available For the technology of mechanical elastic energy storage utilizing spiral torsion springs as the energy storage media presented previously, a global multivariable control algorithm based on nonlinear internal model principle under multiclass external disturbances is proposed. The nonlinear external disturbances with nonharmonic periodic characteristics are generated by multiclass nonlinear external systems. New equations of nonlinear internal model are designed to estimate the multiclass external disturbances. On the basis of constructing the control law of nominal system, a state feedback controller is designed to guarantee the closed-loop system globally uniformly bounded, and a Lyapunov function is constructed to theoretically prove the global uniform boundedness of the multivariable closed-loop system signals. The simulation results verify the correctness and effectiveness of the presented algorithm.

  11. New, more effective methods of exploiting energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Pallares Huici, E.

    1986-01-01

    The energy crisis has made it necessary both to rationalise and improve old technology and to seek new sources of energy. This article reviews new, more efficient methods of using conventional fuels, new combustion technology, fluidised beds, use of heat produced by residual water processing plant, etc.

  12. Power Electronics as Efficient Interface of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Chen, Zhe; Kjær, Søren Bækhøj

    2004-01-01

    renewable energy conversion system, will play an important part in our future energy supply. But other sources like microturbines, photovoltaics and fuel cell systems may also be serious contributor to the power supply. Characteristically, power electronics will be an efficient and important interface...

  13. Pion linac as an energy-tagged ν source

    Directory of Open Access Journals (Sweden)

    T. Goldman

    2008-12-01

    Full Text Available The energy spectrum and flux of neutrinos from a linear pion accelerator are calculated analytically under the assumption of a uniform accelerating gradient. The energy of a neutrino from this source reacting in a detector can be determined from timing and event position information.

  14. Writable electrochemical energy source based on graphene oxide

    Science.gov (United States)

    Wei, Di

    2015-10-01

    Graphene oxide (GO) was mainly used as raw material for various types of reduced graphene oxide (rGO) as a cost effective method to make graphene like materials. However, applications of its own unique properties such as extraordinary proton conductivity and super-permeability to water were overlooked. Here GO based battery-like planar energy source was demonstrated on arbitrary insulating substrate (e.g. polymer sheet/paper) by coating PEDOT, GO ink and rGO on Ag charge collectors. Energy from such GO battery depends on its length and one unit cell with length of 0.5 cm can generate energy capacity of 30 Ah/L with voltage up to 0.7 V when room temperature ionic liquid (RTIL) is added. With power density up to 0.4 W/cm3 and energy density of 4 Wh/L, GO battery was demonstrated to drive an electrochromic device. This work is the first attempt to generate decent energy using the fast transported water molecules inside GO. It provides very safe energy source that enables new applications otherwise traditional battery technology can not make including building a foldable energy source on paper and platform for futuristic wearable electronics. A disposable energy source made of GO was also written on a plastic glove to demonstrate wearability.

  15. High-energy diffraction microscopy at the advanced photon source

    DEFF Research Database (Denmark)

    Lienert, U.; Li, S. F.; Hefferan, C. M.

    2011-01-01

    The status of the High Energy Diffraction Microscopy (HEDM) program at the 1-ID beam line of the Advanced Photon Source is reported. HEDM applies high energy synchrotron radiation for the grain and sub-grain scale structural and mechanical characterization of polycrystalline bulk materials in situ...

  16. Modeling of an autonomous microgrid for renewable energy sources integration

    DEFF Research Database (Denmark)

    Serban, I.; Teodorescu, Remus; Guerrero, Josep M.

    2009-01-01

    The frequency stability analysis in an autonomous microgrid (MG) with renewable energy sources (RES) is a continuously studied issue. This paper presents an original method for modeling an autonomous MG with a battery energy storage system (BESS) and a wind power plant (WPP), with the purpose...

  17. Energy sources, self-organization, and the origin of life.

    Science.gov (United States)

    Boiteau, Laurent; Pascal, Robert

    2011-02-01

    The emergence and early developments of life are considered from the point of view that contingent events that inevitably marked evolution were accompanied by deterministic driving forces governing the selection between different alternatives. Accordingly, potential energy sources are considered for their propensity to induce self-organization within the scope of the chemical approach to the origin of life. Requirements in terms of quality of energy locate thermal or photochemical activation in the atmosphere as highly likely processes for the formation of activated low-molecular weight organic compounds prone to induce biomolecular self-organization through their ability to deliver quanta of energy matching the needs of early biochemical pathways or the reproduction of self-replicating entities. These lines of reasoning suggest the existence of a direct connection between the free energy content of intermediates of early pathways and the quanta of energy delivered by available sources of energy.

  18. Waste-to-energy: A way from renewable energy sources to sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, Richa [Babasaheb BhimRao Ambedkar University, Lucknow, U.P. (India); Tyagi, V.V.; Pathak, Ashish [Centre for Energy Studies, Indian Institute of Technology Delhi, 110016 (India)

    2010-12-15

    Nowadays, energy is key consideration in discussions of sustainable development. So, sustainable development requires a sustainable supply of clean and affordable renewable energy sources that do not cause negative societal impacts. Energy sources such as solar radiation, the winds, waves and tides are generally considered renewable and, therefore, sustainable over the relatively long term. Wastes and biomass fuels are usually viewed as sustainable energy sources. Wastes are convertible to useful energy forms like hydrogen (biohydrogen), biogas, bioalcohol, etc., through waste-to-energy technologies. In this article, possible future energy utilization patterns and related environmental impacts, potential solutions to current environmental problems and renewable energy technologies and their relation to sustainable development are discussed with great emphasis on waste-to-energy routes (WTERs). (author)

  19. Optimal portfolio selection between different kinds of Renewable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Zakerinia, MohammadSaleh; Piltan, Mehdi; Ghaderi, Farid

    2010-09-15

    In this paper, selection of the optimal energy supply system in an industrial unit is taken into consideration. This study takes environmental, economical and social parameters into consideration in modeling along with technical factors. Several alternatives which include renewable energy sources, micro-CHP systems and conventional system has been compared by means of an integrated model of linear programming and three multi-criteria approaches (AHP, TOPSIS and ELECTRE III). New parameters like availability of sources, fuels' price volatility, besides traditional factors are considered in different scenarios. Results show with environmental preferences, renewable sources and micro-CHP are good alternatives for conventional systems.

  20. UCN sources at external beams of thermal neutrons. An example of PIK reactor

    CERN Document Server

    Lychagin, E V; Muzychka, A Yu; Nekhaev, G V; Nesvizhevsky, V V; Onegin, M S; Sharapov, E I; Strelkov, A V

    2015-01-01

    We consider ultracold neutron (UCN) sources based on a new method of UCN production in superfluid helium (4He). The PIK reactor is chosen as a perspective example of the application of this idea, which consists of installing a 4He UCN source in a beam of thermal or cold neutrons and surrounding the source with a moderator-reflector, which plays the role of a source of cold neutrons (CNs) feeding the UCN source. The CN flux in the source can be several times larger than the incident flux, due to multiple neutron reflections from the moderator-reflector. We show that such a source at the PIK reactor would provide an order of magnitude larger density and production rate than an analogous source at the ILL reactor. We estimate parameters of a 4He source with solid methane (CH4) or/and liquid deuterium (D2) moderator-reflector. We show that such a source with CH4 moderator-reflector at the PIK reactor would provide the UCN density of ~1x10^5 1/cm^3, and the UCN production rate of ~2x10^7 1/s. These values are resp...

  1. New renewable source of energy from municipal solid waste plastics

    Energy Technology Data Exchange (ETDEWEB)

    Sarker, Moinuddin; Zaman, Ashiquz; Mamunor Rashid, Mohammad

    2010-09-15

    Renewable energy plays an important role in the supply of energy. When energy sources are used, the demand for fossil fuels is reduced. Emissions from the evaporation and combustion of these traditional fossil fuels contributing to a range of environmental and health problems, causing poor air quality, and emitting greenhouse gases that contribute to global warming. Alternative fuel created from domestic sources has been proposed as a solution to these problems and many alternative fuels are being developed based on solar, wind and biomass. Natural State Research has developed different alternative hydrocarbon fuel produced from abundant waste plastic materials.

  2. International Requirements for Large Integration of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Molina-Garcia, Angel; Hansen, Anca Daniela; Muljadi, Ed

    2017-01-01

    Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European...... Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet...

  3. Electrochemical energy storage for renewable sources and grid balancing

    CERN Document Server

    Moseley, Patrick T

    2015-01-01

    Electricity from renewable sources of energy is plagued by fluctuations (due to variations in wind strength or the intensity of insolation) resulting in a lack of stability if the energy supplied from such sources is used in 'real time'. An important solution to this problem is to store the energy electrochemically (in a secondary battery or in hydrogen and its derivatives) and to make use of it in a controlled fashion at some time after it has been initially gathered and stored. Electrochemical battery storage systems are the major technologies for decentralized storage systems and hydrogen

  4. UCN sources at external beams of thermal neutrons. An example of PIK reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lychagin, E.V., E-mail: lychag@nf.jinr.ru [Joint Institute for Nuclear Research, 6 Joliot-Curie, Dubna 141980 (Russian Federation); Mityukhlyaev, V.A., E-mail: victim@pnpi.spb.ru [Petersburg Nuclear Physics Institute, Orlova Roscha, Gatchina 188300 (Russian Federation); Muzychka, A.Yu., E-mail: muz@nf.jinr.ru [Joint Institute for Nuclear Research, 6 Joliot-Curie, Dubna 141980 (Russian Federation); Nekhaev, G.V., E-mail: grigorijnekhaev@yandex.ru [Joint Institute for Nuclear Research, 6 Joliot-Curie, Dubna 141980 (Russian Federation); Nesvizhevsky, V.V., E-mail: nesvizhevsky@ill.eu [Institut Max von Laue – Paul Langevin, 71 Avenue des Martyrs, Grenoble 38042 (France); Onegin, M.S., E-mail: oneginm@gmail.com [Petersburg Nuclear Physics Institute, Orlova Roscha, Gatchina 188300 (Russian Federation); Sharapov, E.I., E-mail: sharapov@nf.jinr.ru [Joint Institute for Nuclear Research, 6 Joliot-Curie, Dubna 141980 (Russian Federation); Strelkov, A.V., E-mail: str@jinr.ru [Joint Institute for Nuclear Research, 6 Joliot-Curie, Dubna 141980 (Russian Federation)

    2016-07-01

    We consider ultracold neutron (UCN) sources based on a new method of UCN production in superfluid helium ({sup 4}He). The PIK reactor is chosen as a perspective example of application of this idea, which consists of installing {sup 4}He UCN source in the beam of thermal or cold neutrons and surrounding the source with moderator-reflector, which plays the role of cold neutron (CN) source feeding the UCN source. CN flux in the source can be several times larger than the incident flux, due to multiple neutron reflections from the moderator–reflector. We show that such a source at the PIK reactor would provide an order of magnitude larger density and production rate than an analogous source at the ILL reactor. We estimate parameters of {sup 4}He source with solid methane (CH{sub 4}) or/and liquid deuterium (D{sub 2}) moderator–reflector. We show that such a source with CH{sub 4} moderator–reflector at the PIK reactor would provide the UCN density of ~1·10{sup 5} cm{sup −3}, and the UCN production rate of ~2·10{sup 7} s{sup −1}. These values are respectively 1000 and 20 times larger than those for the most intense UCN user source. The UCN density in a source with D{sub 2} moderator-reflector would reach the value of ~2·10{sup 5} cm{sup −3}, and the UCN production rate would be equal ~8·10{sup 7} s{sup −1}. Installation of such a source in a beam of CNs would slightly increase the density and production rate.

  5. ENEGY FORESTRY A SOURCE OF ENERGY FOR THE ROMANIAN ECONOMY

    Directory of Open Access Journals (Sweden)

    Margareta RUSU

    2014-06-01

    Full Text Available Using "grown fuels", as opposed to "fossil fuels" such as coal, natural gas and oil can be a possible solution to the global energy crisis by creating a decentralized power generation network. Wood is among the most efficient sources of bioenergy in terms of quantity of energy released by unit of carbon emitted compared with other energy crops. Research, development and innovation create new opportunities for the process of gathering and transforming the raw material into energy. Innovation should be targeted to deliver sustainability, biodiversity and economic growth. Romanian has a high potential and can develop energy forestry in order to reduce CO2 emissions and ensure an alternative energy solution and an energy reserve. This paper aims to analize the challenges and opportunities the biomass energy industry creates in the context of climate change mitigation which must be seen from an entrepreneurial perspective in Romania.

  6. Phase 1 report: investigation of geothermal energy information sources

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-14

    A subject screening list was developed which would be used by acquisitions specialists as a guide to the orientation of pertinent literature. The subject screening list was derived primarily from the geothermal subset of the ERDA Energy Thesaurus and from the ERDA Energy Information Data Base Subject Categories (TID-4584). The subject screening list is included. Subsequent to preparation of the subject screening list, a core list of serial publications containing geothermal energy information was generated by SIS library scientists. This list was corelated with the ERDA-TIC serial publications list. Included in both lists is an estimate of the annual geothermal information yield of the serial sources. A listing of sources of geothermal energy information other than serial publications and the conclusions, including methods of acquisitioning to be utilized and the estimated annual volume of information from all sources are presented.

  7. A Stochastic Calculus for Network Systems with Renewable Energy Sources

    CERN Document Server

    Wu, Kui; Marinakis, Dimitri

    2011-01-01

    We consider the performance modeling and evaluation of network systems powered with renewable energy sources such as solar and wind energy. Such energy sources largely depend on environmental conditions, which are hard to predict accurately. As such, it may only make sense to require the network systems to support a soft quality of service (QoS) guarantee, i.e., to guarantee a service requirement with a certain high probability. In this paper, we intend to build a solid mathematical foundation to help better understand the stochastic energy constraint and the inherent correlation between QoS and the uncertain energy supply. We utilize a calculus approach to model the cumulative amount of charged energy and the cumulative amount of consumed energy. We derive upper and lower bounds on the remaining energy level based on a stochastic energy charging rate and a stochastic energy discharging rate. By building the bridge between energy consumption and task execution (i.e., service), we study the QoS guarantee under...

  8. ENHANCEMENT AND EVOLUTION OF SOLITARY WAVES EXCITED BY A LOCALIZED EXTERNAL SOURCE%局地外源激发的孤波的增强和演变

    Institute of Scientific and Technical Information of China (English)

    MENGLu; 吕克利

    2002-01-01

    利用扰动法由准地转涡度方程导出了强迫mKdV方程,讨论了强迫mKdV孤波的质量和能量的时间演变,并通过拟谱法求得了强迫mKdV方程的数值解.计算结果显示,局地外源强迫激发的mKdV孤波与失谐参数α和外源强度有密切关系.与强迫KdV方程相比,在强迫mKdV方程中,外源强迫可以激发出振幅更大的更不稳定的孤波.%By using aperturbation method, a forced mKdV equation is derived from the so-called quasi-geostrophic vorticity equation, and time evolutions of mass and energy of the mKdV solitary waves are discusse. Finally, numerical solutions of the forced mKdV equation are obtained by using the pseudo-spectral method. The calculation results show that the features of the mKdV solitary waves excited by localized external source are closely related to the detuning parameter a and the strength of the external source. The external forcing source in a forced mKdV system can excite larger amplitude and more instable disturbances than those in a forced KdV system.

  9. Global sourcing - performance and integration : reflections on performance, implications from cross-functional and external integration

    NARCIS (Netherlands)

    Horn, Philipp

    2013-01-01

    Despite the fact that firms and individuals have been sourcing on a global basis since ancient times, global sourcing as a topic has received considerable attention from managers and scholars in recent years. Global business has been reported to be growing considerably during the last decades and

  10. Global sourcing - performance and integration : reflections on performance, implications from cross-functional and external integration

    NARCIS (Netherlands)

    Horn, Philipp

    2013-01-01

    Despite the fact that firms and individuals have been sourcing on a global basis since ancient times, global sourcing as a topic has received considerable attention from managers and scholars in recent years. Global business has been reported to be growing considerably during the last decades and th

  11. The fractal nature materials microstructure influence on electrochemical energy sources

    Directory of Open Access Journals (Sweden)

    Mitić V.V.

    2015-01-01

    Full Text Available With increasing of the world energy crisis, research for new, renewable and alternative energy sources are in growth. The focus is on research areas, sometimes of minor importance and applications, where the different synthesis methods and microstructure properties optimization, performed significant improvement of output materials’ and components’ electro-physical properties, which is important for higher energy efficiency and in the electricity production (batteries and battery systems, fuel cells and hydrogen energy contribution. Also, the storage tanks capacity improvement, for the energy produced on such way, which is one of the most important development issues in the energy sphere, represents a very promising research and application area. Having in mind, the results achieved in the electrochemical energy sources field, especially electrolyte development, these energy sources, materials fractal nature optimization analysis contribution, have been investigated. Based on materials fractal structure research field, particularly electronic materials, we have performed microstructure influence parameters research in electrochemistry area. We have investigated the Ho2O3 concentration influence (from 0.01wt% to 1wt% and sintering temperature (from 1320°C to 1380°C, as consolidation parameters, and thus, also open the electrochemical function fractalization door and in the basic thermodynamic parameters the fractal correction introduced. The fractal dimension dependence on additive concentration is also investigated. [Projekat Ministarstva nauke Republike Srbije, br. 172057: Directed synthesis, structure and properties of multifunctional materials

  12. Energy Efficiency of Biogas Produced from Different Biomass Sources

    Science.gov (United States)

    Begum, Shahida; Nazri, A. H.

    2013-06-01

    Malaysia has different sources of biomass like palm oil waste, agricultural waste, cow dung, sewage waste and landfill sites, which can be used to produce biogas and as a source of energy. Depending on the type of biomass, the biogas produced can have different calorific value. At the same time the energy, being used to produce biogas is dependent on transportation distance, means of transportation, conversion techniques and for handling of raw materials and digested residues. An energy systems analysis approach based on literature is applied to calculate the energy efficiency of biogas produced from biomass. Basically, the methodology is comprised of collecting data, proposing locations and estimating the energy input needed to produce biogas and output obtained from the generated biogas. The study showed that palm oil and municipal solid waste is two potential sources of biomass. The energy efficiency of biogas produced from palm oil residues and municipal solid wastes is 1.70 and 3.33 respectively. Municipal solid wastes have the higher energy efficiency due to less transportation distance and electricity consumption. Despite the inherent uncertainties in the calculations, it can be concluded that the energy potential to use biomass for biogas production is a promising alternative.

  13. Solid waste as an energy source for the Northeast

    Energy Technology Data Exchange (ETDEWEB)

    Meier, P.M.; McCoy, T.H.

    1976-06-01

    This report, one of a series prepared for the BNL study of the Energy Future of the Northeastern United States, presents an assessment of the potential contribution of energy recovery from municipal refuse to energy supply in the region. A brief review of the present and likely future quantity and composition of municipal refuse and the technologies available for energy recovery (Chapters II and III) is followed by a comparison of the potential contributions to energy supply of the various recovery options including direct firing in utility boilers, pyrolysis to oil or gas, and steam generation for industrial process heat or district space heating (Chapter IV). The relationship of refuse energy recovery to market conditions for alternative energy sources is considered in Chapter V, which also includes an analysis of the impact of haul costs, interest rates, and delivered prices of the major fuels. Institutional barriers to implementation of energy recovery are reviewed in Chapter VI, and the environmental implications of the concept are addressed in Chapter VII. In the concluding chapters, scenarios of energy recovery are developed for 1985 and 2000, and the sensitivity of overall energy yield to projections and assumptions is examined. Although even under the most optimistic assumptions, refuse energy recovery is found to contribute only some 5 percent of total regional consumption, the economic and environmental benefits, coupled with the increasing difficulty of finding other refuse disposal alternatives, make energy recovery a very attractive policy choice for helping to relieve future energy supply difficulties in the Northeast. (auth)

  14. Development of a high-energy distributed energy source electromagnetic railgun with improved energy conversion efficiency

    Science.gov (United States)

    Tower, M. M.; Haight, C. H.

    1984-03-01

    The development status of a single-pulse distributed-energy-source electromagnetic railgun (ER) based on the design of Tower (1982) is reviewed. The five-stage ER is 3.65 m long, with energy inputs every 30 cm starting at the breech and a 12.7-mm-square bore cross section, and is powered by a 660-kJ 6-kV modular capacitor bank. Lexan cubes weighing 2.5 grams have been accelerated to velocities up to 8.5 km/sec at 500 kA and conversion efficiency up to 20 percent. Design goal for a 20-mm-sq-cross-section ER is acceleration of a 60-g projectile to 3-4 km/sec at 35-percent efficiency. Drawings, photographs, and graphs of performance are provided.

  15. An open source approach to Sweden's energy system : A review of future energy pathways

    OpenAIRE

    Nawfal, Saadi Failali

    2013-01-01

    This paper discusses the development of an energy systems model for Swedenconsidering electricity, heat and direct fossil fuel consumption in the residential,industrial and transport sectors as well as the energy interaction with the other Nordiccountries and its impact on the Swedish energy system. The model is developed in theOpen source energy modelling system (OSeMOSYS) (Mark Howells 2011) andshowcases potential energy investment options for Sweden in the next four decades(2010-2050). It ...

  16. Low-energy point source searches with IceCube

    Directory of Open Access Journals (Sweden)

    Euler Sebastian

    2016-01-01

    Full Text Available Due to the overwhelming background of atmospheric muons, the traditional IceCube point source search in the Southern Hemisphere is mainly sensitive to neutrinos with energies above 100TeV. A new approach focuses on events starting inside the instrumented volume. By utilizing different veto techniques we are able to significantly reduce the energy threshold and can now for the first time explore the entire Southern Hemisphere at neutrino energies as low as 100GeV. We present the results of two analyses targeting slightly different energy ranges. Both use one year of data taken with the completed IceCube detector in 2011/12.

  17. THE CONTINUED DEVELOPMENT OF THE SNS EXTERNAL ANTENNA H- ION SOURCE

    Energy Technology Data Exchange (ETDEWEB)

    Welton, Robert F [ORNL; Carmichael, Justin R [ORNL; Desai, Nandishkumar J [ORNL; Fuja, Raymond E [ORNL; Goulding, Richard Howell [ORNL; Han, Baoxi [ORNL; Kang, Yoon W [ORNL; Lee, Shyh-Yuan [ORNL; Murray Jr, S N [ORNL; Pennisi, Terry R [ORNL; Potter, Kerry G [ORNL; Santana, Manuel [ORNL; Stockli, Martin P [ORNL

    2010-01-01

    The U.S. Spallation Neutron Source (SNS) is an accelerator-based, pulsed neutron-scattering facility, currently in the process of ramping up neutron production. In order to insure that the SNS will meet operational commitments as well as provide for future facility upgrades with high reliability, we are developing an RF-driven, H- ion source based on a water-cooled, ceramic aluminum nitride (AlN) plasma chamber. To date, early versions of this source has delivered up to 42 mA to the SNS Front End (FE) and unanalyzed beam currents up to ~ 100mA (60Hz, 1ms) to the ion source test stand. This source was operated on the SNS accelerator from February to April 2009 and produced ~35mA (beam current required by the ramp up plan) with availability of ~97%. During this run several ion source failures identified reliability issues which must be addressed before the source re-enters routine operation: plasma ignition, antenna lifetime, magnet cooling and cooling jacket integrity. This report discusses these issues, details proposed engineering solutions and notes progress to date.

  18. Hydrogen Production Costs of Various Primary Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae Hyuk; Tak, Nam Il; Kim, Yong Hee; Park, Won Seok

    2005-11-15

    Many studies on the economical aspects of hydrogen energy technologies have been conducted with the increase of the technical and socioeconomic importance of the hydrogen energy. However, there is still no research which evaluates the economy of hydrogen production from the primary energy sources in consideration of Korean situations. In this study, the hydrogen production costs of major primary energy sources are compared in consideration of the Korean situations such as feedstock price, electricity rate, and load factor. The evaluation methodology is based on the report of the National Academy of Science (NAS) of U.S. The present study focuses on the possible future technology scenario defined by NAS. The scenario assumes technological improvement that may be achieved if present research and development (R and D) programs are successful. The production costs by the coal and natural gas are 1.1 $/kgH{sub 2} and 1.36 $/kgH{sub 2}, respectively. However, the fossil fuels are susceptible to the price variation depending on the oil and the raw material prices, and the hydrogen production cost also depends on the carbon tax. The economic competitiveness of the renewable energy sources such as the wind, solar, and biomass are relatively low when compared with that of the other energy sources. The estimated hydrogen production costs from the renewable energy sources range from 2.35 $/kgH{sub 2} to 6.03 $/kgH{sub 2}. On the other hand, the production cost by nuclear energy is lower than that of natural gas or coal when the prices of the oil and soft coal are above $50/barrel and 138 $/ton, respectively. Taking into consideration the recent rapid increase of the oil and soft coal prices and the limited fossil resource, the nuclear-hydrogen option appears to be the most economical way in the future.

  19. Constraining High-Energy Cosmic Neutrino Sources: Implications and Prospects

    CERN Document Server

    Murase, Kohta

    2016-01-01

    We consider limits on the local ($z=0$) density ($n_0$) of extragalactic neutrino sources set by the nondetection of steady high-energy neutrino sources producing $\\gtrsim30$ TeV muon multiplets in the present IceCube data, taking into account the redshift evolution, luminosity function and neutrino spectrum of the sources. We show that the lower limit depends weakly on source spectra and strongly on redshift evolution. We find $n_0\\gtrsim{10}^{-7}~{\\rm Mpc}^{-3}$ for standard candle sources evolving rapidly, $n_s\\propto{(1+z)}^3$, and $n_0\\gtrsim{10}^{-5}~{\\rm Mpc}^{-3}$ for nonevolving sources. The corresponding upper limits on their neutrino luminosity are $L_{{\

  20. Fungal Pretreatment of Willow Sawdust with Abortiporus biennis for Anaerobic Digestion: Impact of an External Nitrogen Source

    Directory of Open Access Journals (Sweden)

    Maria Alexandropoulou

    2017-01-01

    Full Text Available In this study the effect of nitrogen (N supplementation in the fungal pretreatment of willow sawdust (WSD via the white rot fungus Abortiporus biennis (A. biennis was studied in terms of the fractionation of lignocellulosic biomass and biochemical methane potential (BMP. Thus, different external nitrogen sources (yeast extract (YE, urea (UR, and ammonium nitrate (AN at different ratios (N/C of 1/250 and 1/50 were added and the effect of the above parameters on the chemical composition of WSD during solid-state fermentation (SSF experiments with A. biennis was assessed and compared to the experiment of fungal pretreatment without N supplementation (N/C was 1/500, control experiment. The results indicated that the addition of an external nitrogen source did not facilitate delignification, regardless of the type of nitrogen source and the ratio of N/C used. On the other hand, enhanced cellulose uptake was observed. Samples of the 28th day of cultivation, with and without N supplementation, were used for BMP tests, where a reduction in methane yield was observed, compared to the control experiment. In addition, a combination of fungal with alkali (20% NaOH w/w dry mass pretreatment was performed in order to assess the effect of combined pretreatment on the lignocellulosic content and the BMP.

  1. Analysis and simulations of a frequency synthesizer with internal and external noise sources

    Directory of Open Access Journals (Sweden)

    G. S. Sangha

    2006-01-01

    Full Text Available In this paper, a novel technique to analyse the noise behaviour of a second-order-PLL based synthesizer is demonstrated. Its non-linear behaviour is analyzed with independent noise-sources introduced at different points of the circuit. Phase plane trajectories will be used to demonstrate that noise sources at different locations in the loop produce qualitatively different contributions to the output signal of the synthesizer.

  2. Understanding and accepting fusion as an alternative energy source

    Energy Technology Data Exchange (ETDEWEB)

    Goerz, D.A.

    1987-12-10

    Fusion, the process that powers our sun, has long promised to be a virtually inexhaustible source of energy for mankind. No other alternative energy source holds such bright promise, and none has ever presentd such formidable scientific and engineering challenges. Serious research efforts have continued for over 30 years in an attempt to harness and control fusion here on earth. Scientists have made considerable progress in the last decade toward achieving the conditions required for fusion power, and recent experimental results and technological progress have made the scientific feasibility of fusion a virtual certainty. With this knowledge and confidence, the emphasis can now shift toward developing power plants that are practical and economical. Although the necessary technology is not in hand today, the extension to an energy producing system in 20 years is just as attainable as was putting a man on the moon. In the next few decades, the world's population will likely double while the demand for energy will nearly quadruple. Realistic projections show that within the next generation a significant fraction of our electric power must come from alternative energy sources. Increasing environmental concerns may further accelerate this timetable in which new energy sources must be introduced. The continued development of fusion systems to help meet the energy needs of the future will require greater public understanding and support of this technology. The fusion community must do more to make the public aware of the fact that energy is a critical international issue and that fusion is a viable and necessary energy technology that will be safe and economical. 12 refs., 8 figs.

  3. Note: Localization based on estimated source energy homogeneity

    Science.gov (United States)

    Turkaya, Semih; Toussaint, Renaud; Eriksen, Fredrik Kvalheim; Lengliné, Olivier; Daniel, Guillaume; Flekkøy, Eirik G.; Mâløy, Knut Jørgen

    2016-09-01

    Acoustic signal localization is a complex problem with a wide range of industrial and academic applications. Herein, we propose a localization method based on energy attenuation and inverted source amplitude comparison (termed estimated source energy homogeneity, or ESEH). This inversion is tested on both synthetic (numerical) data using a Lamb wave propagation model and experimental 2D plate data (recorded with 4 accelerometers sensitive up to 26 kHz). We compare the performance of this technique with classic source localization algorithms: arrival time localization, time reversal localization, and localization based on energy amplitude. Our technique is highly versatile and out-performs the conventional techniques in terms of error minimization and cost (both computational and financial).

  4. Active Galactic Nuclei: Sources for ultra high energy cosmic rays?

    Energy Technology Data Exchange (ETDEWEB)

    Biermann, Peter L. [MPI for Radioastronomy, Bonn (Germany); Dept. of Phys. and Astron., Univ. of Bonn (Germany); Dept. of Phys. and Astr., Univ. of Alabama, Tuscaloosa, AL (United States); Dept. of Phys., Univ. of Alabama at Huntsville, AL (United States); Inst. Nucl. Phys. FZ, Karlsruhe Inst. of Techn. (KIT) (Germany); Becker, Julia K. [Institution foer Fysik, Goeteborgs Univ. (Sweden); Dept. of Phys., Univ. Dortmund, Dortmund (Germany); Caramete, Laurentiu [MPI for Radioastronomy, Bonn (Germany); Institute for Space Studies, Bucharest (Romania); Curutiu, Alex [MPI for Radioastronomy, Bonn (Germany); Engel, Ralph [Inst. Nucl. Phys. FZ, Karlsruhe Inst. of Techn. (KIT) (Germany); Falcke, Heino [Dept. of Astrophys., IMAP, Radboud Univ., Nijmegen (Netherlands); ASTRON, Dwingeloo (Netherlands); Gergely, Laszlo A. [Dept. Appl. Sci., London South Bank University (United Kingdom); Dept. of Theoret. and Exp. Phys., Univ. of Szeged, Szeged (Hungary); Isar, P. Gina [Inst. Nucl. Phys. FZ, Karlsruhe Inst. of Techn. (KIT) (Germany); Institute for Space Studies, Bucharest (Romania); Maris, Ioana C. [Inst. Nucl. Phys. FZ, Karlsruhe Inst. of Techn. (KIT) (Germany); Meli, Athina [Physik. Inst. Univ. Erlangen-Nuernberg (Germany); Kampert, Karl-Heinz [Phys. Dept., Univ. Wuppertal (Germany); Stanev, Todor [Bartol Research Inst., Univ. of Delaware, Newark, DE (United States); Tascau, Oana [Phys. Dept., Univ. Wuppertal (Germany); Zier, Christian [MPI for Radioastronomy, Bonn (Germany); Raman Res. Inst., Bangalore (India)

    2009-05-15

    The origin of ultra high energy cosmic rays promises to lead us to a deeper understanding of the structure of matter. This is possible through the study of particle collisions at center-of-mass energies in interactions far larger than anything possible with the Large Hadron Collider, albeit at the substantial cost of no control over the sources and interaction sites. For the extreme energies we have to identify and understand the sources first, before trying to use them as physics laboratories. Here we describe the current stage of this exploration. The most promising contenders as sources are radio galaxies and gamma ray bursts. The sky distribution of observed events yields a hint favoring radio galaxies. Key in this quest are the intergalactic and galactic magnetic fields, whose strength and structure are not yet fully understood. Current data and statistics do not yet allow a final judgement. We outline how we may progress in the near future.

  5. A look ahead: Status of the SNS external antenna ion source and the new RFQ test stand

    Science.gov (United States)

    Welton, R. F.; Aleksandrov, A.; Dudnikov, V. G.; Han, B. X.; Murray, S. N.; Pennisi, T. R.; Piller, M.; Kang, Y.; Santana, M.; Stockli, M. P.

    2015-04-01

    The U.S. Spallation Neutron Source (SNS) now operates with ˜1 MW of beam power to target with the near-term goal of delivering 1.4 MW. Plans are being considered to incorporate a second target station into the facility which will require ˜2.8 MW of beam power. Presently, H- beam pulses (˜1 ms, 60 Hz) are produced by an RF-driven, Cs-enhanced, multi-cusp ion source which injects beam into an RFQ (Radio Frequency Quadrupole) accelerator that, in turn, feeds the SNS Linac. Currently the source/RFQ system delivers ˜35 mA of pulsed current to the linac which is mostly sufficient for 1.4 MW operations while ˜50 mA are needed for the second target station upgrade. This paper provides a look forward for the SNS by providing (i) the present and future SNS source/RFQ beam requirements and our plans to achieve these, (ii) a description and status of the external antenna ion source being developed for the replacement of the current internal antenna ion source, and (iii) a description and status of the newly constructed RFQ test facility.

  6. A look ahead: Status of the SNS external antenna ion source and the new RFQ test stand

    Energy Technology Data Exchange (ETDEWEB)

    Welton, R. F., E-mail: welton@ornl.gov; Aleksandrov, A.; Han, B. X.; Murray, S. N.; Pennisi, T. R.; Piller, M.; Kang, Y.; Santana, M.; Stockli, M. P. [Spallation Neutron Source, Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN, 37830-647 (United States); Dudnikov, V. G. [Muons, Inc. 552 N. Batavia Avenue, Batavia, IL 60510 (United States)

    2015-04-08

    The U.S. Spallation Neutron Source (SNS) now operates with ∼1 MW of beam power to target with the near-term goal of delivering 1.4 MW. Plans are being considered to incorporate a second target station into the facility which will require ∼2.8 MW of beam power. Presently, H{sup −} beam pulses (∼1 ms, 60 Hz) are produced by an RF-driven, Cs-enhanced, multi-cusp ion source which injects beam into an RFQ (Radio Frequency Quadrupole) accelerator that, in turn, feeds the SNS Linac. Currently the source/RFQ system delivers ∼35 mA of pulsed current to the linac which is mostly sufficient for 1.4 MW operations while ∼50 mA are needed for the second target station upgrade. This paper provides a look forward for the SNS by providing (i) the present and future SNS source/RFQ beam requirements and our plans to achieve these, (ii) a description and status of the external antenna ion source being developed for the replacement of the current internal antenna ion source, and (iii) a description and status of the newly constructed RFQ test facility.

  7. Dynamic energy management employing renewable energy sources in IP over DWDM networks

    DEFF Research Database (Denmark)

    Chen, Xin; Phillips, Chris; Wang, Jiayuan

    2013-01-01

    The continued growth of energy consumption has been one of the main constraints for the development of the Internet. The increasing emissions of greenhouse gases associated with electricity generation also raise public concern for the environment. In this paper, we propose a dynamic energy...... management framework employing renewable energy sources in IP over DWDM core networks. The main concept is to combine infrastructure sleeping and virtual router migration to improve the network energy efficiency. By using the energy source information provided by the smart grid, the nodes that are powered...

  8. Alternate Funding Sources for the International Atomic Energy Agency

    Energy Technology Data Exchange (ETDEWEB)

    Toomey, Christopher; Wyse, Evan T.; Kurzrok, Andrew J.; Swarthout, Jordan M.

    2012-09-04

    its mission and capabilities. To resolve these resource constraints, we recommend the creation of an endowment, funded entirely through private contributions. Our initial estimates for the endowment are that a €2B principal. This level of capitalization could provide significant support to all aspects of the IAEA’s mission, including Capital Investment and Innovation; Technical Cooperation; as well as incentivizing the policy and technology entrepreneurship that will be necessary for the future health of the nonproliferation regime. Given this potential, our future efforts will focus on a more rigorous assessment of the financial requirements, while simultaneously creating the beginnings of a functional organization. These include: organizational structure, metrics for grant-making and performance evaluation, and outreach and fundraising strategies. At the end of this process, there should be sufficient information and engagement to begin to operationalize the endowment through external funding sources.

  9. The 1-loop self-energy of an electron in a strong external magnetic field revisited

    Science.gov (United States)

    Machet, B.

    2016-05-01

    I calculate the 1-loop self-energy of the lowest Landau level of an electron of mass m in a strong, constant and uniform external magnetic field B, beyond its always used truncation at (ln L)2, L = |e|B m2. This is achieved by evaluating the integral deduced in 1953 by Demeur and incompletely calculated in 1969 by Jancovici, which I recover from Schwinger’s techniques of calculation. It yields δm ≃ αm 4π ln L - γE -3 22 -9 4 + π β-1 + π2 6 + πΓ[1-β] Lβ-1 + 1 L π 2-β - 5 + 𝒪 1 L≥2 with β ≃ 1.175 for 75 ≤ L ≤ 10, 000. The (ln L)2 truncation exceeds the precise estimate by 45% at L = 100 and by more at lower values of L, due to neglecting, among others, the single logarithmic contribution. This is doubly unjustified because it is large and because it is needed to fulfill appropriate renormalization conditions. Technically challenging improvements look therefore necessary, for example, when resumming higher loops and incorporating the effects of large B on the photonic vacuum polarization, like investigated in recent years.

  10. Magnetic reconnection in high-energy-density plasmas in the presence of an external magnetic field

    Science.gov (United States)

    Fox, W.; Bhattacharjee, A.; Fiksel, G.; Nilson, P.; Hu, S.; Chang, P.-Y.; Barnak, D.; Betti, R.

    2012-10-01

    Magnetic reconnection has recently been observed and studied in high-energy-density, laser-produced plasmas. These experiments are interesting both for obtaining fundamental data on reconnection, and may also be relevant for inertial fusion, as this magnetic reconnection geometry, with multiple, colliding, magnetized plasma bubbles, occurs naturally inside ICF hohlraums. We present initial results of experiments conducted on the OMEGA EP facility on magnetic reconnection between colliding, magnetized blowoff plasmas. While in previous experiments the magnetic fields were self-generated in the plasma by the Biermann battery effect, in these experiments the seed magnetic field is generated by pulsing current through a pair of external foils using the MIFEDS current generator (Magneto-Inertial Fusion Electrical Discharge System) developed at LLE. Time-resolved images of the magnetic fields and plasma dynamics are obtained from proton radiography and x-ray self-emission, respectively. We present initial results of the experiments, including comparison to ``null'' experiments with zero MIFEDS magnetic field, and associated modeling using the radiation-hydro code DRACO and the particle-in-cell code PSC.

  11. The 1-loop self-energy of an electron in a strong external magnetic field revisited

    CERN Document Server

    Machet, Bruno

    2015-01-01

    I revisit the 1-loop self-energy of an electron in a strong, constant and uniform external magnetic field B. First, I show, after Tsai (1974), how, for an electron in the lowest Landau level, Schwinger's techniques, as explained by Dittrich and Reuter (1985) lead to the same integral deduced by Demeur (1953) and used later by Jancovici (1969). Then, I calculate the Demeur-Jancovici integral in the range $75 \\leq L\\equiv\\frac{|e|B}{m^2} \\leq 10\\,000$, which yields $\\delta m \\simeq \\frac{\\alpha m}{4\\pi} \\left[\\left(\\ln L-\\gamma_E-\\frac32\\right)^2 -\\frac94 +\\frac{\\pi}{\\beta-1} +\\frac{\\pi^2}{6} +\\frac{\\pi\\;\\Gamma[1-\\beta]}{L^{\\beta-1}} +\\frac{1}{L}\\left(\\frac{\\pi}{2-\\beta}-5\\right) +{\\cal O}(\\frac{1}{L^{\\geq 2}})\\right],\\ \\beta \\simeq 1.175$, close to Jancovici's last estimate $\\delta m \\simeq \\frac{\\alpha m}{4\\pi}\\left[\\left(\\ln 2L-\\gamma_E-\\frac32\\right)^2 +A+\\ldots\\right]$ with $A\\simeq 3.5$ (previously undetermined). The term proportional to $(\\ln\\frac{|e|B}{m^2})^2$ can never be considered to be leading and ...

  12. External mechanical work versus oxidative energy consumption ratio during a basketball field test.

    Science.gov (United States)

    Crisafulli, A; Melis, F; Tocco, F; Laconi, P; Lai, C; Concu, A

    2002-12-01

    A field test consisting of 5 continuous runs at the maximum speed possible, playing the ball, starting from the centre line to the basket with a final shot, was studied in order to obtain an index of mechanical work efficiency in basketball players (micro-index=Jmec/Joxy) and evaluate the correlation between micro-index and velocity, acceleration, mechanical power and lactacid anaerobic capacity, respectively. Eight male basketball players were studied; Jmec was the external mechanical work output obtained by means of a video image analysis software which gave the potential and the kinetic translational energies of athletes running and jumping and their velocity, acceleration and mechanical power. By means of a telemetric device (Kosmed K4), for measuring O2 consumption ( VO2), we obtained oxidative work (Joxy). By using this device we also assessed the excess of CO2, which was considered an index of lactacid anaerobic capacity. Non-parametric Spearman statistics revealed a significant correlation between mu index and mean velocity (ppower (ppower and endurance velocity.

  13. Negative ions as a source of low energy neutral beams

    Energy Technology Data Exchange (ETDEWEB)

    Fink, J.H.

    1980-01-01

    Little consideration has been given to the impact of recent developments in negative ion source technology on the design of low energy neutral beam injectors. However, negative ion sources of improved operating efficiency, higher gas efficiency, and smaller beam divergence will lead to neutral deuterium injectors, operating at less than 100 keV, with better operating efficiencies and more compact layouts than can be obtained from positive ion systems.

  14. Voltage Sag Source Location Based on Instantaneous Energy Detection

    DEFF Research Database (Denmark)

    Chen, Zhe; Kong, Wei; Dong, Xinzhou

    2008-01-01

    Voltage sag is a major power quality problem, which could disrupt the operation of voltage-sensitive equipment. This paper presents the method based on variation components-based instantaneous energy for voltage sag source detection. Simulations have been performed to provide the thorough analysi...... for system with distributed generation units. The studies show that the presented method can effectively detect the location of voltage sag source....

  15. Production of chemical energy carriers by non-expendable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Nitsch, J.

    1976-01-01

    The different forms of energy (radiation, high-temperature heat and electricity) arising from non-expendable energy sources like solar energy can be used for the production of chemical energy-carriers. Possible methods are the splitting of water by means of photolysis, thermochemical cycles and electrolysis, as well as the storage of energy in closed loop chemical systems. These methods are described and efficiencies and costs of the production of these energy carriers are specified. Special problems of the long-distance transportation of hydrogen produced by solar energy are described and the resulting costs are estimated.

  16. International Requirements for Large Integration of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Molina-Garcia, Angel; Hansen, Anca Daniela; Muljadi, Ed

    2017-01-01

    Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European...... Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet...... these overall objectives, and they each need to provide a detailed roadmap describing how they will meet these legally binding targets [2]. At this time, RES are an indispensable part of the global energy mix, which has been partially motivated by the continuous increases in hydropower as well as the rapid...

  17. The source of multi spectral energy of solar energetic electron

    Energy Technology Data Exchange (ETDEWEB)

    Herdiwijaya, Dhani [Astronomy Division and Bosscha Observatory, Faculty Mathematics and Natural Sciences, Intitute Technology of Bandung, Ganesha 10, Bandung, Indonesia 40132 dhani@as.itb.ac.id (Indonesia)

    2015-04-16

    We study the solar energetic electron distribution obtained from ACE and GOES satellites which have different altitudes and electron spectral energy during the year 1997 to 2011. The electron spectral energies were 0.038–0.315 MeV from EPAM instrument onboard ACE satellite and >2 MeV from GOES satellite. We found that the low electron energy has no correlation with high energy. In spite of we have corrected to the altitude differences. It implied that they originated from time dependent events with different sources and physical processes at the solar atmosphere. The sources of multi spectral energetic electron were related to flare and CME phenomena. However, we also found that high energetic electron comes from coronal hole.

  18. A source of energy : sustainable architecture and urbanism

    Energy Technology Data Exchange (ETDEWEB)

    Roestvik, Harald N.

    2011-07-01

    An update on the environmental challenges. Meant to inspire and be a source of energy.Tearing down myths and floodlighting paradoxes. Particularly relevant for students of architecture, architects and concerned citizens. Training tasks, recommendations for further source books and web sites, are included. From the content: Climate change and consensus, Population growth, Food production, The sustainable city, Transportation myths and facts, A mini history of environmental architecture, Architects' approach to sustainable design, The failure of western architects; a case study; China, The passive, zeb and plus energy building, Natural ventilation, Sustainable materials, Plastics in building, Nuclear energy, Solar energy, The grid of the future, Indoor climate and health. The sick building syndrome, Radon, Universal design, Paradoxes, Bullying techniques, Trust yourself, Timing, Which gateway will you choose?, On transience. (au)

  19. Electrostatic energy harvesting device with dual resonant structure for wideband random vibration sources at low frequency

    Science.gov (United States)

    Zhang, Yulong; Wang, Tianyang; Zhang, Ai; Peng, Zhuoteng; Luo, Dan; Chen, Rui; Wang, Fei

    2016-12-01

    In this paper, we present design and test of a broadband electrostatic energy harvester with a dual resonant structure, which consists of two cantilever-mass subsystems each with a mass attached at the free edge of a cantilever. Comparing to traditional devices with single resonant frequency, the proposed device with dual resonant structure can resonate at two frequencies. Furthermore, when one of the cantilever-masses is oscillating at resonance, the vibration amplitude is large enough to make it collide with the other mass, which provides strong mechanical coupling between the two subsystems. Therefore, this device can harvest a decent power output from vibration sources at a broad frequency range. During the measurement, continuous power output up to 6.2-9.8 μW can be achieved under external vibration amplitude of 9.3 m/s2 at a frequency range from 36.3 Hz to 48.3 Hz, which means the bandwidth of the device is about 30% of the central frequency. The broad bandwidth of the device provides a promising application for energy harvesting from the scenarios with random vibration sources. The experimental results indicate that with the dual resonant structure, the vibration-to-electricity energy conversion efficiency can be improved by 97% when an external random vibration with a low frequency filter is applied.

  20. Human internal and external exposure to PBDEs - A review of levels and sources

    DEFF Research Database (Denmark)

    Frederiksen, Marie; Vorkamp, Katrin; Thomsen, Marianne

    2009-01-01

    ingest more dust than adults. Infants are also exposed to PBDEs via breast milk. Internal human exposure has generally been found to be one order of magnitude larger in North America than in Europe and Asia. These differences cannot solely be explained by the dietary intake as meat products are the only......This paper reviews the existing literature on human exposure to polybrominated diphenyl ethers (PBDEs), with particular focus on external exposure routes (e.g. dust, diet, and air) and the resulting internal exposure to PBDEs (e.g. breast milk and blood). Being lipophilic and persistent organic...... compounds, PBDEs accumulate in lipid-rich tissues. Consequently, food items like fish from high trophic levels or lipid-rich oils have been found to contain relatively high concentrations of PBDEs, thus presenting an important exposure pathway to humans. The presence of PBDEs in various products of everyday...

  1. Biogas, as a renewable energy source, produced during the anaerobic digestion of organic waste

    CSIR Research Space (South Africa)

    Greben, H

    2009-10-01

    Full Text Available Identifying alternative sources of energy is a matter of urgency, since conventional energy sources are becoming exhausted. Renewable energy sources, such as biogas, can be generated from organic waste, through the anaerobic digestion (AD...

  2. Renewable energy sources for sustainable tourism in the Carpathian region

    Science.gov (United States)

    Mandryk, O. M.; Arkhypova, L. M.; Pobigun, O. V.; Maniuk, O. R.

    2016-08-01

    The use of renewable energy in sustainable tourism development of the region is grounded in the paper. There are three stages of selecting areas for projects of renewable energy sources: selection of potentially suitable area; consideration of exclusion criteria, detailed assessment of potential sites or areas. The factors of impact on spatial constraints and opportunities for building wind, solar and small hydro power plants on the parameters of sustainable tourism development in the Carpathian region were determined.

  3. External Carbon Source Addition as a Means to Control an Activated Sludge Nutrient Removal Process

    DEFF Research Database (Denmark)

    Isaacs, Steven Howard; Henze, Mogens; Søeberg, Henrik

    1994-01-01

    In alternating type activated sludge nutrient removal processes, the denitrification rate can be limited by the availability of readily-degradable carbon substrate. A control strategy is proposed by which an easily metabolizable COD source is added directly to that point in the process at which...... denitrification momentarily occurs. This approach serves to increase the denitrification rate on demand, thereby allowing the accumulation of nitrate and nitrite during periods of peak nitrogen loading to be reduced or avoided. A pilot plant demonstration of the control strategy using acetate as COD source...

  4. Deployable Acoustic Projector System (DAPS) Energy Source Study

    Science.gov (United States)

    1988-12-01

    System (DAPS) Energy C:N62190-88-M-0754 Source Study - Final Report 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADORESS(ES) S. PERFORMING...is assumed to be unlimited. Standard Form 298 Back (Rev 2-89) DeAOyable AoUstic Projector Sy8tm (APS) uNrrED &•rg Source Study - Fina Report...tPHTED Enegy Source Study - F1 nal Peport TECHNOLOGMContract No. N819-88-M-0754 0 C~pability of Sustaining Nigh Pz’eM=O El ’.ffaWtala A~crss the M

  5. Review of personal monitoring techniques for the measurement of absorbed dose from external beta and low energy photon radiation

    DEFF Research Database (Denmark)

    Christensen, Poul

    1986-01-01

    The techniques available at present for personal monitoring of doses from external beta and low energy photon radiation are reviewed. The performance of currently used dosimetry systems is compared with that recommended internationally, and developments for improving the actual performance...... are outlined. The subjects dealt with compromise: the quantity to be measured, the required accuracy of measurement, calibration procedures, and dosemeter design including the main parameters influencing the energy and angular response of the dosemeter, such as detector thickness, filter thickness, dosemeter...

  6. Testing Special Relativity at High Energies with Astrophysical Sources

    Science.gov (United States)

    Stecker, F. W.

    2007-01-01

    Since the group of Lorentz boosts is unbounded, there is a question as to whether Lorentz invariance (LI) holds to infinitely short distances. However, special and general relativity may break down at the Planck scale. Various quantum gravity scenarios such as loop quantum gravity, as well as some forms of string theory and extra dimension models may imply Lorentz violation (LV) at ultrahigh energies. The Gamma-Ray Large Area Space Telescope (GLAST), to be launched in mid-December, will measure the spectra of distant extragalactic sources of high energy gamma-rays, particularly active galactic nuclei and gamma-ray bursts. GLAST can look for energy-dependent gamma-ray propagation effects from such sources as a signal of Lorentz invariance violation. These sources may also exhibit the high energy cutoffs predicted to be the result of intergalactic annihilation interactions with low energy photons having a flux level as determined by various astronomical observations. With LV the threshold for such interactions can be significantly raised, changing the predicted absorption turnover in the observed spectrum of the sources. Stecker and Glashow have shown that the existence such absorption features in the spectra of extragalactic sources puts constraints on LV. Such constraints have important implications for some quantum gravity and large extra dimension models. Future spaceborne detectors dedicated to measuring gamma-ray polarization can look for birefringence effects as a possible signal of loop quantum gravity. A very small LV may also result in the modification or elimination of the GZK effect, thus modifying the spectrum of ultrahigh energy cosmic rays. This possibility can be explored with ground-based arrays such as Auger or with a space based detector system such as the proposed OWL satellite mission.

  7. Energy Management Policies for Energy-Neutral Source-Channel Coding

    CERN Document Server

    Castiglione, Paolo; Erkip, Elza; Zemen, Thomas

    2011-01-01

    In cyber-physical systems where sensors measure the temporal evolution of a given phenomenon of interest and radio communication takes place over short distances, the energy spent for source acquisition and compression may be comparable with that used for transmission. Additionally, in order to avoid limited lifetime issues, sensors may be powered via energy harvesting and thus collect all the energy they need from the environment. This work addresses the problem of energy allocation over source acquisition/compression and transmission for energy-harvesting sensors. At first, focusing on a single-sensor, energy management policies are identified that guarantee a maximal average distortion while at the same time ensuring the stability of the queue connecting source and channel encoders. It is shown that the identified class of policies is optimal in the sense that it stabilizes the queue whenever this is feasible by any other technique that satisfies the same average distortion constraint. Moreover, this class...

  8. What makes Chinese firms to choose international external technology sources? An inquiry on internationalization, innovation and institutions

    DEFF Research Database (Denmark)

    Li-Ying, Jason; Wang, Yuandi

    2013-01-01

    . However, we have also witnessed an emerging trend of external acquisition of technology by EMFs firms in both international and domestic markets. Why some EMFs are active in sourcing both domestic and international technologies instead of being significantly in favour of foreign technologies from...... developed countries? We argue that exploring the determinants of EMFs’ choice with regard to EMFs’ strategic choice of souring domestic or foreign technology becomes the key to understanding why EMFs are increasingly gaining prominence in the global competitive landscape. Thus, this paper tends to advance...... our understanding of EMF competitiveness by adding a crucial link of EMFs strategic choice regarding the origin of technology sourcing from different origins and exploring the determinants for such a choice through the lens of internationalization, innovation and institutions (3 I’s) within a coherent...

  9. European Union's renewable energy sources and energy efficiency policy review. The Spanish perspective

    Energy Technology Data Exchange (ETDEWEB)

    De Alegria Mancisidor, Itziar Martinez; Diaz de Basurto Uraga, Pablo; Ruiz de Arbulo Lopez, Patxi [Departamento de Organizacion de Empresas, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (Spain); Martinez de Alegria Mancisidor, Inigo [Departamento de Electronica y Telecomunicaciones, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (Spain)

    2009-01-15

    The European Union's (EU) energy objectives, legislation and programmes are determinant for the current strategy for the promotion of renewable energy sources (RES) and energy efficiency (EE) in Spain, which is becoming a key element for its international competitiveness. Firstly, this article explores the evolution of the EU's energy strategy, focusing on the adopted legislations and programmes to promote RES and EE. It concludes with an analysis of the impact of those measures in Spain. (author)

  10. Production of low energy spread ion beams with multicusp sources

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. [Lawrence Berkeley National Lab., CA (United States); Perkins, L.T. [Lawrence Berkeley National Lab., CA (United States); Gough, R.A. [Lawrence Berkeley National Lab., CA (United States); Hoffmann, M. [Lawrence Berkeley National Lab., CA (United States); Kunkel, W.B. [Lawrence Berkeley National Lab., CA (United States); Leung, K.N. [Lawrence Berkeley National Lab., CA (United States); Sarstedt, M. [Lawrence Berkeley National Lab., CA (United States); Vujic, J. [Lawrence Berkeley National Lab., CA (United States); Weber, M. [Lawrence Berkeley National Lab., CA (United States); Williams, M.D. [Lawrence Berkeley National Lab., CA (United States)

    1996-05-11

    The use of multicusp sources to generate ion beams with narrow energy spread has been investigated. It is found that the presence of a magnetic filter can reduce the longitudinal energy spread significantly. This is achieved by creating a uniform plasma potential distribution in the discharge chamber region, eliminating ion production in the extraction chamber and in the sheath of the exit aperture and by minimizing the probability of charge exchange processes in the extraction chamber. An energy spread as low as 1 eV has been measured. (orig.).

  11. Production of low energy spread ion beams with multicusp sources

    Science.gov (United States)

    Y., Lee; Perkins, L. T.; Gough, R. A.; Hoffmann, M.; Kunkel, W. B.; N. Leung, K.; Sarstedt, M.; Vujic, J.; Weber, M.; Williams, M. D.

    1996-02-01

    The use of multicusp sources to generate ion beams with narrow energy spread has been investigated. It is found that the presence of a magnetic filter can reduce the longitudinal energy spread significantly. This is achieved by creating a uniform plasma potential distribution in the discharge chamber region, eliminating ion production in the extraction chamber and in the sheath of the exit aperture and by minimizing the probability of charge exchange processes in the extraction chamber. An energy spread as low as 1 eV has been measured.

  12. In Theory: Dark Energy as a Power Source

    Science.gov (United States)

    Nemiroff, Robert J.; Russell, David; Tangmatitham, Matipon

    2017-01-01

    In theory, it is possible to use the dark energy of the universe as a power source. In practice, the amount of energy that could be liberated in a local setting is many orders of magnitude too small to be useful or even detectable. Nevertheless, in the interests of education and amusement, simple machines that could, in theory, extract local power from the gravitationally repulsive cosmological constant are discussed. The gravitational neutral buoyancy distance -- the distance where local Newtonian gravity balances cosmological dark energy in a concordance cosmology -- is computed between two point objects of low mass.

  13. Fusion Based Neutron Sources for Security Applications: Energy Optimisation

    OpenAIRE

    Albright, S.; Seviour, Rebecca

    2014-01-01

    There is a growing interest in the use of neutrons for na- tional security. The majority of work on security focuses on the use of either sealed tube DT fusors or fission sources, e.g. Cf-252. Fusion reactions enable the energy of the neu- tron beam to be chosen to suit the application, rather than the application being chosen based on the available neu- tron beam energy. In this paper we discuss simulations of fusion reactions demonstrating the broad range of energies available and methods f...

  14. Error Sources in the ETA Energy Analyzer Measurement

    Energy Technology Data Exchange (ETDEWEB)

    Nexsen, W E

    2004-12-13

    At present the ETA beam energy as measured by the ETA energy analyzer and the DARHT spectrometer differ by {approx}12%. This discrepancy is due to two sources, an overestimate of the effective length of the ETA energy analyzer bending-field, and data reduction methods that are not valid. The discrepancy can be eliminated if we return to the original process of measuring the angular deflection of the beam and use a value of 43.2cm for the effective length of the axial field profile.

  15. Nitrogen source and external medium pH interaction differentially affects root and shoot metabolism in Arabidopsis

    Directory of Open Access Journals (Sweden)

    Asier eSarasketa

    2016-02-01

    Full Text Available Ammonium nutrition often represents an important growth-limiting stress in plants. Some of the symptoms that plants present under ammonium nutrition have been associated with pH deregulation, in fact external medium pH control is known to improve plants ammonium tolerance. However, the way plant cell metabolism adjusts to these changes is not completely understood. Thus, in this work we focused on how Arabidopsis thaliana shoot and root respond to different nutritional regimes by varying the nitrogen source (NO3- and NH4+, concentration (2 and 10 mM and pH of the external medium (5.7 and 6.7 to gain a deeper understanding of cell metabolic adaptation upon altering these environmental factors. The results obtained evidence changes in the response of ammonium assimilation machinery and of the anaplerotic enzymes associated to Tricarboxylic Acids (TCA cycle in function of the plant organ, the nitrogen source and the degree of ammonium stress. A greater stress severity at pH 5.7 was related to NH4+ accumulation; this could not be circumvented in spite of the stimulation of glutamine synthetase, glutamate dehydrogenase and TCA cycle anaplerotic enzymes. Moreover, this study suggests specific functions for different gln and gdh isoforms based on the nutritional regime. Overall, NH4+ accumulation triggering ammonium stress appears to bear no relation to nitrogen assimilation impairment.

  16. Piezoelectric Energy Harvesting Devices: An Alternative Energy Source for Wireless Sensors

    Directory of Open Access Journals (Sweden)

    Action Nechibvute

    2012-01-01

    Full Text Available The recent advances in ultralow power device integration, communication electronics, and microelectromechanical systems (MEMS technology have fuelled the emerging technology of wireless sensor networks (WSNs. The spatial distributed nature of WSNs often requires that batteries power the individual sensor nodes. One of the major limitations on performance and lifetime of WSNs is the limited capacity of these finite power sources, which must be manually replaced when they are depleted. Moreover, the embedded nature of some of the sensors and hazardous sensing environment make battery replacement very difficult and costly. The process of harnessing and converting ambient energy sources into usable electrical energy is called energy harvesting. Energy harvesting raises the possibility of self-powered systems which are ubiquitous and truly autonomous, and without human intervention for energy replenishment. Among the ambient energy sources such as solar energy, heat, and wind, mechanical vibrations are an attractive ambient source mainly because they are widely available and are ideal for the use of piezoelectric materials, which have the ability to convert mechanical strain energy into electrical energy. This paper presents a concise review of piezoelectric microgenerators and nanogenerators as a renewable energy resource to power wireless sensors.

  17. PROSPECTS OF ENERGY EFFICIENCY IMPROVEMENT AND DEVELOPMENT OF THE RENEWABLE ENERGY SOURCES IN PROVINCE OF VOJVODINA

    Energy Technology Data Exchange (ETDEWEB)

    Gvozdenac, D.; Ciric, R.; Tesic, M.

    2007-07-01

    The paper presents the outcome of the research in the field of energy efficiency improvement and development of the renewable energy sources in province of Vojvodina (Serbia). The summarized results of the paper are: - Potentials for energy efficiency improvement in Vojvodina, - Potentials for development of renewable energy sources in Vojvodina, - Proposal of measures of the energy policy for the promotion of research and development (R and D) which will use local scientific and technical potentials in the field of renewable energy sources and energy efficiency and improve the sustainability on the long run. - Proposal of measures for the energy policy in the domain of renewable energy sources development and energy efficiency and estimation of potentials for improvements by applying proposed measures in order to accomplish established tasks. - Synthesizing findings and proposals in the Action Plan of the Executive Council of the Autonomous Province of Vojvodina for the realization of the medium term program as well as the establishment of the monitoring plan for the assessment of program objectives progress. (auth)

  18. THE NEED FOR THE USE OF RENEWABLE ENERGY SOURCES

    Directory of Open Access Journals (Sweden)

    Grigorash O. V.

    2016-04-01

    Full Text Available The article reveals main reasons for developing tendencies to the using of new types of energy, which are limited supply of traditional fuels and environmental problems associated with its processing. It is shown that new forms of energy plays an important role in the energy supply of many countries of the world, and in the future they can become the main sources of energy to meet the growing needs of the global economy. We reveal main reasons of the increasing interest in renewable energy, and we show the obvious prospects of their use, due to two factors. First, according to experts, the global reserves of traditional fuels are limited, and secondly, this was evidenced by the investments of leading countries in this promising industry. The article lists reasons for the need for the use of renewable energy sources in Russia. Increased consumption of natural resources has become a real threat to the security of the life of human society. The basis of solving modern social and environmental problems is a transition to a regulated process of safe use of natural energy potential to meet the vital needs of people not only in the coming decades, but in the long run. It is concluded, that the determining condition for the development of the human civilization at present and in the future would be the level of natural resources which ensures the needs of the population without making harm to the environment

  19. High energy pulsewidth tunable CPA free picosecond source

    Science.gov (United States)

    Pouysegur, Julien; Guichard, Florent; Zaouter, Yoann; Hanna, Marc; Druon, Frédéric; Hönninger, Clemens; Mottay, Eric; Georges, Patrick

    2016-03-01

    A hybrid ytterbium-doped fiber - bulk laser source generating up to 116MW peak power for 3ps pulse duration at 50kHz repetition rate and 1030nm wavelength is presented. Tunability of the pulse duration is made by spectral compression occurring into the seeder. Divided Pulse Amplification scheme is investigated to study energy capabilities of the setup.

  20. EnergyPlus Air Source Integrated Heat Pump Model

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Bo [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy and Transportation Science Division; Adams, Mark B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy and Transportation Science Division; New, Joshua Ryan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy and Transportation Science Division

    2016-03-30

    This report summarizes the development of the EnergyPlus air-source integrated heat pump model. It introduces its physics, sub-models, working modes, and control logic. In addition, inputs and outputs of the new model are described, and input data file (IDF) examples are given.

  1. Compact, energy EFFICIENT neutron source: enabling technology for various applications

    Energy Technology Data Exchange (ETDEWEB)

    Hershcovitch, A.; Roser, T.

    2009-12-01

    A novel neutron source comprising of a deuterium beam (energy of about 100 KeV) injected into a tube filled with tritium gas and/or tritium plasma that generates D-T fusion reactions, whose products are 14.06 MeV neutrons and 3.52 MeV alpha particles, is described. At the opposite end of the tube, the energy of deuterium ions that did not interact is recovered. Beryllium walls of proper thickness can be utilized to absorb 14 MeV neutrons and release 2-3 low energy neutrons. Each ion source and tube forms a module. Larger systems can be formed from multiple units. Unlike currently proposed methods, where accelerator-based neutron sources are very expensive, large, and require large amounts of power for operation, this neutron source is compact, inexpensive, easy to test and to scale up. Among possible applications for this neutron source concept are sub-critical nuclear breeder reactors and transmutation of radioactive waste.

  2. Transition from a maternal to external nitrogen source in maize seedlingsoo

    Institute of Scientific and Technical Information of China (English)

    Kasra Sabermanesh; Luke R. Holtham; Jessey George; Ute Roessner; Berin A. Boughton; Sigrid Heuer; Mark Tester; Darren C. Plett; Trevor P. Garnett

    2017-01-01

    Maximizing NO3- uptake during seedling development is important as it has a major influence on plant growth and yield. However, little is known about the processes leading to, and involved in, the initiation of root NO3- uptake capacity in developing seedlings. This study examines the physiological processes involved in root NO3- uptake and metabolism, to gain an under-standing of how the NO3- uptake system responds to meet demand as maize seedlings transition from seed N use to external N capture. The concentrations of seed-derived free amino acids within root and shoot tissues are initially high, but decrease rapidly until stabilizing eight days after imbibition (DAI). Similarly, shoot N% decreases, but does not stabilize until 12–13 DAI. Following the decrease in free amino acid concentra-tions, root NO3-uptake capacity increases until shoot N%stabilizes. The increase in root NO3- uptake capacity corresponds with a rapid rise in transcript levels of putative NO3-transporters, ZmNRT2.1 and ZmNRT2.2. The processes underlying the increase in root NO3- uptake capacity to meet N demand provide an insight into the processes controlling N uptake.

  3. The transition from a maternal to external nitrogen source in maize seedlings

    KAUST Repository

    Sabermanesh, Kasra

    2017-02-07

    Maximising NO3 - uptake during seedling development is important as it has a major influence on plant growth and yield. However, little is known about the processes leading to, and involved in, the initiation of root NO3 - uptake capacity in developing seedlings. This study examines the physiological processes involved in root NO3 - uptake and metabolism, to gain an understanding of how the NO3 - uptake system responds to meet demand as maize seedlings transition from seed N use to external N capture. The concentrations of seed-derived free amino acids within root and shoot tissues are initially high, but decrease rapidly until stabilising eight days after imbibition (DAI). Similarly, shoot N% decreases, but does not stabilise until 12-13 DAI. Following the decrease in free amino acid concentrations, root NO3 - uptake capacity increases until shoot N% stabilises. The increase in root NO3 uptake capacity corresponds with a rapid rise in transcript levels of putative NO3 - transporters, ZmNRT2.1 and ZmNRT2.2. The processes underlying the increase in root NO3 - uptake capacity to meet N demand provide an insight into the processes controlling N uptake.

  4. Source Energy and Emission Factors for Energy Use in Buildings (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    Deru, M.; Torcellini, P.

    2007-06-01

    This document supports the other measurement procedures and all building energy-monitoring projects by providing methods to calculate the source energy and emissions from the energy measured at the building. Energy and emission factors typically account for the conversion inefficiencies at the power plant and the transmission and distribution losses from the power plant to the building. The energy and emission factors provided here also include the precombustion effects, which are the energy and emissions associated with extracting, processing, and delivering the primary fuels to the point of conversion in the electrical power plants or directly in the buildings.

  5. ACCELERATING THE ADOPTION PROCESS OF RENEWABLE ENERGY SOURCES AMONG SMES

    Directory of Open Access Journals (Sweden)

    Mirjam Leloux

    2015-07-01

    Full Text Available By 2020, intermittent renewable small scale energy sources (e.g. wind and solar energy are expected to represent about 17% of the EU’s total electricity consumption. All national overriding energy policy objectives are to ensure competitive, secure and sustainable energy for the economy and for society. Renewable energy, allied with energy efficiency, is often found crucial to meet these goals of secure sustainable and competitive energy supplies reducing dependency on expensive fossil imports and underpinning the move towards a low carbon economy while delivering green jobs to the economy. This all contributes to national competitiveness and the jobs and economic growth agenda. However, a straight forward implementation of renewable energy options is not easy, due to various barriers and obstacles. For most SMEs, the concept of generating their own renewable energy is still more of academic than genuine interest. In general, several barriers are experienced, such as high capital investments, slow return on investment, and the lack of knowledge of the benefits. There is a need for education on the benefits and drawbacks of sustainable energy, as well as a greater contribution to costs for this to work. In this paper we describe the intermediate outcomes of a European Partnership under the name of GREAT (Growing Renewable Energy Applications and Technologies, funded under the INTERREG IVB NWE Programme. GREAT aims to encourage communities and small to medium size enterprises (SMEs in Ireland, the United Kingdon, Belgium and The Netherlands to develop technological solutions for Smart Grid, Renewable Energy and Distributive Generation; research and develop policy issues for regulatory authorities and provide structured co-operation opportunities between SMEs and research institutes / technology developers. We developed GREAT spreadsheets to facilitate SMEs in each country to calculate the return-on-investment of renewable energy sources, such as

  6. Eddy energy sources and flux in the Red Sea

    KAUST Repository

    Zhan, Peng

    2015-04-01

    In the Red Sea, eddies are reported to be one of the key features of hydrodynamics in the basin. They play a significant role in converting the energy among the large-scale circulation, the available potential energy (APE) and the eddy kinetic energy (EKE). Not only do eddies affect the horizontal circulation, deep-water formation and overturning circulation in the basin, but they also have a strong impact on the marine ecosystem by efficiently transporting heat, nutrients and carbon across the basin and by pumping the nutrient-enriched subsurface water to sustain the primary production. Previous observations and modeling work suggest that the Red Sea is rich of eddy activities. In this study, the eddy energy sources and sinks have been studied based on a high-resolution MITgcm. We have also investigated the possible mechanisms of eddy generation in the Red Sea. Eddies with high EKE are found more likely to appear in the central and northern Red Sea, with a significant seasonal variability. They are more inclined to occur during winter when they acquire their energy mainly from the conversion of APE. In winter, the central and especially the northern Red Sea are subject to important heat loss and extensive evaporation. The resultant densified upper-layer water tends to sink and release the APE through baroclinic instability, which is about one order larger than the barotropic instability contribution and is the largest source term for the EKE in the Red Sea. As a consequence, the eddy energy is confined to the upper layer but with a slope deepening from south to north. In summer, the positive surface heat flux helps maintain the stratification and impedes the gain of APE. The EKE is, therefore, much lower than that in winter despite a higher wind power input. Unlike many other seas, the wind energy is not the main source of energy to the eddies in the Red Sea.

  7. Energy spread of ion beams generated in multicusp ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Sarstedt, M.; Herz, P.; Kunkel, W.B. [and others

    1995-04-01

    For the production of future microelectronics devices, various alternate methods are currently being considered to replace the presently used method of lithography with ion beam lithography. One of these methods is the Ion Projection Lithography (IPL), which aims at the possibility of projecting sub-0.25 {mu}m patterns of a stencil mask onto a wafer substrate. In order to keep the chromatic aberrations below 25 nm, an ion source which delivers a beam with energy spread of less than 3 eV is desired. For this application, multicusp ion sources are being considered. We measure the longitudinal energy spread of the plasma ions by using a two-grid electrostatic energy analyzer. The energy spread of the extracted beam is measured by a high-voltage retarding-field energy analyzer. In order to obtain the transverse ion temperature, a parallel-plate scanner is being set up to study the beam emittance. In this paper, comparisons are made for different ion source configurations.

  8. Electrical energy sources for organic synthesis on the early earth

    Science.gov (United States)

    Chyba, Christopher; Sagan, Carl

    1991-01-01

    In 1959, Miller and Urey (Science 130, 245) published their classic compilation of energy sources for indigenous prebiotic organic synthesis on the early Earth. Much contemporary origins of life research continues to employ their original estimates for terrestrial energy dissipation by lightning and coronal discharges, 2 × 1019 J yr-1 and 6 × 1019 J yr-1, respectively. However, more recent work in terrestrial lightning and point discharge research suggests that these values are overestimates by factors of about 20 and 120, respectively. Calculated concentrations of amino acids (or other prebiotic organic products) in the early terrestrial oceans due to electrical discharge sources may therefore have been equally overestimated. A review of efficiencies for those experiments that provide good analogues to naturally-occurring lightning and coronal discharges suggests that lightning energy yields for organic synthesis (nmole J-1) are about one order of magnitude higher than those for coronal discharge. Therefore organic production by lightning may be expected to have dominated that due to coronae on early Earth. Limited data available for production of nitric oxide in clouds suggests that coronal emission within clouds, a source of energy heretofore too uncertain to be included in the total coronal energy inventory, is insufficient to change this conclusion. Our recommended valves for lightning and coronal discharge dissipation rates on the early Earth are, respectively, 1 × 1018 J yr-1 and 5 × 1017 J yr-1.

  9. A quest for sources of ultrahigh energy cosmic rays

    Science.gov (United States)

    Kotera, Kumiko

    2012-03-01

    The origin of ultrahigh energy cosmic rays (UHECRs, particles arriving on the Earth with energy 10^17- 10^21 eV) is still a mystery. I will review the experimental and theoretical efforts that are being deployed by the community to solve this long-standing enigma, including the recent results from the Auger Observatory. I will discuss the observable signatures that help narrow down the list of possible candidate sources, namely the distribution of the arrival directions of UHECRs in the sky, their energy spectrum, their chemical composition, and their multi-messenger signatures (in neutrinos, gamma-rays and gravitational waves). I will focus in particular on one candidate source that has been little discussed in the literature: young rotation-powered pulsars. The production of UHECRs in these objects could give a picture that is surprisingly consistent with the latest data measured with the Auger Observatory.

  10. Energy Sources Management and Future Automotive Technologies: Environmental Impact

    Directory of Open Access Journals (Sweden)

    Florin Mariasiu

    2012-01-01

    Full Text Available The paper presents the environmental impact created through the introduction of introducing new technologies in transportation domain. New electric vehicles are considered zero-emission vehicles (ZEV. However, electricity produced in power plants is still predominantly based on fossil fuel usage (required for recharge electric vehicle batteries and thus directly affects the quantity of pollutant emissions and greenhouse gases (CO2, NOx and SOx. Given the structure of EU-wide energy sources used for electricity generation, the potential pollutant emissions stemming from these energy sources, related to energy consumption of an electric vehicle, was determined under the projected environmental impact of specific market penetration of electric vehicles. In addition to the overall impact at the EU level, were identified the countries for which the use of electric vehicles is (or not feasible in terms of reaching the lower values ​​of future emissions compared to the present and future European standards.

  11. International Standards to Develop and Promote Energy Efficiency and Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    International Standards are a powerful tool for disseminating new technologies and good practices, developing global markets and supporting the harmonization of government policies on energy efficiency and renewable sources on a global scale.

  12. Consumption dynamics of primary-energy sources: The century of alternative energies

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira Matias, Joao Carlos de; Devezas, Tessaleno Campos [Department of Electromechanical Engineering, University of Beira Interior, P-6201-001 Covilha (Portugal)

    2007-07-15

    The present article characterizes economically and socially the two past centuries, focusing the consumption development of several primary-energy sources, linking it with this century's reality. The main objective is to demonstrate the relationship between the substitution process of primary-energy sources and the socio-economic development. Our analysis focuses on four technological transformations that have already occurred, emphasizing some aspects of present technological transformations. Thus, the role of primary-energy sources in the development of each long economic wave is analysed, as well as its geopolitical, commercial and social importance. Finally, bearing in mind the past dynamics associated with long structural waves, and making use of technological forecasting tools (Logistic Substitution and Delphi Technique), a future perspective is presented in which the substitution process points toward alternative-energy sources. (author)

  13. Consumption dynamics of the primary energy sources. The Century of the alternative energies

    Energy Technology Data Exchange (ETDEWEB)

    Matias, Joao Carlos de Oliveira; Devezas, Tessaleno Campos [Dept. of Electromechanical Engineering, University of Beira Interior, Covilha (Portugal)

    2002-07-01

    The present article characterizes the two past centuries economically and socially, focusing on the development of the several energy sources' consumption and linking it with this century's reality. The central aim is to demonstrate the relation between substitution of primary energy sources and socio-economic development. Our analysis focuses four technological transformations already occurred in the past, emphasising some aspects of the present technological transformation. Thus, the role of primary energy sources on the development of each long wave is emphasized as well as their geopolitical, commercial and social importance. Finally, and keeping in mind this past dynamics associated with long structural waves, and making use of technological forecasting tools (Logistic Substitution and Delphi Technique), it is presented a future perspective in which the substitution process points towards alternative energy sources.

  14. Estimation of the external cost of energy production based on fossil fuels in Finland and a comparison with estimates of external costs of wind power

    Energy Technology Data Exchange (ETDEWEB)

    Otterstroem, T. [Ekono Energy Ltd, Helsinki (Finland)

    1995-12-31

    Ekono Energy Ltd. and Soil and Water Ltd. participated in 1993 - 1994 in the SIHTI 2 research programme of the Ministry of Trade and Industry by carrying out the project `Estimation of the extremal cost of energy production in Finland`. The aim of the survey was to assess the external costs of Finnish energy production which are incurred by the environmental impacts of emissions during the life cycles of fossil fuels. To this end, the survey studied the environmental impacts of emissions on a local level (population centres), on a national level (Finland) and on a global level. The main target was to develop a method for calculating the economic value of these impacts. The method was applied to the emissions in 1990. During the survey, the main emphasis was put on developing and applying indirect valuation methods. An indirect method proceeds through dose-response functions. The dose-response function links a certain emission quantity, concentration or deposition to the extent or intensity of the effect. When quantitative data on hazards is available, it is possible to carry out monetary valuation by means of market prices or people`s otherwise expressed willingness to pay (WTP). Monetary valuation includes many uncertainty factors, of which the most significant with regard to this study are the transferability of dose-response functions and willingness-to-pay values from different kinds of conditions, additivity of damage values, uncertainty factors and problems related to discounting

  15. Optimization Design and Simulation of a Multi-Source Energy Harvester Based on Solar and Radioisotope Energy Sources

    Directory of Open Access Journals (Sweden)

    Hao Li

    2016-12-01

    Full Text Available A novel multi-source energy harvester based on solar and radioisotope energy sources is designed and simulated in this work. We established the calculation formulas for the short-circuit current and open-circuit voltage, and then studied and analyzed the optimization thickness of the semiconductor, doping concentration, and junction depth with simulation of the transport process of β particles in a semiconductor material using the Monte Carlo simulation program MCNP (version 5, Radiation Safety Information Computational Center, Oak Ridge, TN, USA. In order to improve the efficiency of converting solar light energy into electric power, we adopted PC1D (version 5.9, University of New South Wales, Sydney, Australia to optimize the parameters, and selected the best parameters for converting both the radioisotope energy and solar energy into electricity. The results concluded that the best parameters for the multi-source energy harvester are as follows: Na is 1 × 1019 cm−3, Nd is 3.8 × 1016 cm−3, a PN junction depth of 0.5 μm (using the 147Pm radioisotope source, and so on. Under these parameters, the proposed harvester can achieve a conversion efficiency of 5.05% for the 147Pm radioisotope source (with the activity of 9.25 × 108 Bq and 20.8% for solar light radiation (AM1.5. Such a design and parameters are valuable for some unique micro-power fields, such as applications in space, isolated terrestrial applications, and smart dust in battlefields.

  16. On the physics of power, energy and economics of renewable electric energy sources - Part I

    Energy Technology Data Exchange (ETDEWEB)

    Leijon, Mats; Waters, Rafael [Div. of Electricity, Swedish Centre for Renewable Electric Energy Conversion, Uppsala University, Angstroem 751 21 Uppsala (Sweden); Skoglund, Annika [Dep. of Industrial Economics, Royal Institute of Technology Lindstedts vaeg 30, 100 44 Stockholm (Sweden); Rehn, Alf [Dep. of Business Administration, Abo Akademi University, Henriksgatan 7 FIN-20500 Abo (Finland); Lindahl, Marcus [Div. of Industrial Management, Uppsala University, Box 534, Angstroem 751 21 Uppsala (Sweden)

    2010-08-15

    Environmental concerns have increasingly led to the installation of Renewable Energy Technologies (RETs) despite the fact that they are recognized as expensive. Innovative efforts within the area are beset with difficulties, and they are at risk of producing misdirected or insignificant improvements in terms of the cost effectiveness of total energy conversion systems. This paper investigates how RETs can be evaluated, in terms of economy and engineering solutions, by studying the fundamental physics of renewable energy sources and how it matches with the RETs. This match is described by the ''Degree of Utilization''. The findings indicate that new innovations should focus on the possible number of full loading hours. RETs that are correctly matched to their energy source generate a higher amount of electric energy and have a higher potential of becoming more competitive. In cases where this aspect has been ignored, leading to relatively small degrees of utilization, it can be understood as an engineering mismatch between installed power, converted energy, and the fundamental physics of the renewable energy sources. Since there is a strong and possibly biased support for so-called mature RETs and already existing solutions, a clarification of how fundamental physical laws affect the cost of investments and payback of investments is needed. The present paper is part I out of II and it focuses on the difference between power and energy and the physics of different energy sources and their utilization. (author)

  17. Legislative and policy in energy efficient designing and renewable energy sources: Application in Serbia

    Directory of Open Access Journals (Sweden)

    Pucar Mila

    2007-01-01

    Full Text Available This paper analyses political and legislative frames in the field of energy efficient building and renewable energy sources in planning and implementation in Serbia. „Development strategy until 2015.“ is reviewed in concise portrait. This strategy maps a way for the application of energy services of much higher quality than ones offered at a present day. It reviews relevant laws concerning the subject, as well as institutions, programs and their implementation. Basic principles of energy policy in Serbia and their achievement are also given by that strategy. Serbia's energy policies are designed to allow new legislative, structural, organizational, institutional, and economic frames and visions of unification of Serbian energetics into regional and Pan-European integrations. One of the key factors is the inclusion of sustainable development and energy efficient design concerned policies. Application of these, almost completely neglected, energy sources, for which there is high potential in Serbia, would allow preservation of primary energy sources and local environment. This potential hasn't seen significant research, and therefore, neither the technical improvement. Apart from that, one of the goals of wider application of renewable energy sources is lowering the poverty level. This helps avoiding the already used “dirty development” method. .

  18. Simultaneous reconstruction of emission activity and attenuation coefficient distribution from TOF data, acquired with external transmission source.

    Science.gov (United States)

    Panin, V Y; Aykac, M; Casey, M E

    2013-06-07

    The simultaneous PET data reconstruction of emission activity and attenuation coefficient distribution is presented, where the attenuation image is constrained by exploiting an external transmission source. Data are acquired in time-of-flight (TOF) mode, allowing in principle for separation of emission and transmission data. Nevertheless, here all data are reconstructed at once, eliminating the need to trace the position of the transmission source in sinogram space. Contamination of emission data by the transmission source and vice versa is naturally modeled. Attenuated emission activity data also provide additional information about object attenuation coefficient values. The algorithm alternates between attenuation and emission activity image updates. We also proposed a method of estimation of spatial scatter distribution from the transmission source by incorporating knowledge about the expected range of attenuation map values. The reconstruction of experimental data from the Siemens mCT scanner suggests that simultaneous reconstruction improves attenuation map image quality, as compared to when data are separated. In the presented example, the attenuation map image noise was reduced and non-uniformity artifacts that occurred due to scatter estimation were suppressed. On the other hand, the use of transmission data stabilizes attenuation coefficient distribution reconstruction from TOF emission data alone. The example of improving emission images by refining a CT-based patient attenuation map is presented, revealing potential benefits of simultaneous CT and PET data reconstruction.

  19. A Source of Energy for Any Kind of Star

    Directory of Open Access Journals (Sweden)

    Rabounski D.

    2006-10-01

    Full Text Available We discuss a recently predicted mechanism whereby energy is produced by the background space non-holonomic field (the global space rotation in Thomson dispersion of light in free electrons. We compare the mechanism to the relations of observational astrophysics — the mass-luminosity relation and the stellar energy relation. We show that by such a mechanism generating energy in a star, the luminosity of a star L is proportional to its volume, with a progression associated with increasing radius. The obtained relation L ≈ R^3.4 explains why there are no stars of a size close to that of the bulky planets. This also explains the extremely high thermal flow from within Jupiter, which most probably has the same energy sources as those within a star, but with a power much less than that required to radiate like a star. The theory, being applied to a laboratory condition, suggests new energy sources, working much more effectively and safely than nuclear energy.

  20. Searching for external sources of the riboflavin stored in earthworm eleocytes

    Directory of Open Access Journals (Sweden)

    P Sulik

    2012-10-01

    Full Text Available Riboflavin (vitamin B2 is essential to maintain immune potency in animals and plants. So far is accepted that animals cannot synthesise riboflavin; they rely on plant-sourced diets and intestinal bacteria for their supplies. A unique feature of earthworm ‘hepatocyte-like’ chloragocytes and chloragocyte-derived eleocytes floating in celomic cavity is the storage of riboflavin within intracellular granules. The hypothesis was that vegetarian food-deprivation or antibiotic/antifungal treatment inhibits riboflavin accumulation in eleocytes of Eisenia andrei. The 7-week starvation inhibited worm body weight gain and worm reproduction but had insignificant effects on celomocytes, both amoebocytes and eleocytes, and eleocyte riboflavin accumulation. The 1 week or 3 week antibiotic exposure had insignificant effects on worm coelomocytes and riboflavin content. Thus, a vegetarian diet and intestinal bacteria are not the exclusive or perhaps even the main sources of eleocyte riboflavin. The role of endosymbionts in earthworm flavonoid economy warrants targeted investigation. Moreover, the possibility of horizontal transfer of riboflavin biosynthesis genes from bacteria/fungi to earthworm genomes cannot be neglected.

  1. Review of personal monitoring techniques for the measurement of absorbed dose from external beta and low energy photon radiation

    DEFF Research Database (Denmark)

    Christensen, Poul

    1986-01-01

    The techniques available at present for personal monitoring of doses from external beta and low energy photon radiation are reviewed. The performance of currently used dosimetry systems is compared with that recommended internationally, and developments for improving the actual performance...... materials and detector/filter geometry. Improvements in the energy and angular response of dosemeters for the measurements of doses from beta and low energy photon radiation can be achieved essentially through two different approaches: either by using thin detectors or multi-element dosemeters...

  2. Energy consumption in Hodgkin–Huxley type fast spiking neuron model exposed to an external electric field

    Directory of Open Access Journals (Sweden)

    K. Usha

    2016-09-01

    Full Text Available This paper evaluates the change in metabolic energy required to maintain the signalling activity of neurons in the presence of an external electric field. We have analysed the Hodgkin–Huxley type conductance based fast spiking neuron model as electrical circuit by changing the frequency and amplitude of the applied electric field. The study has shown that, the presence of electric field increases the membrane potential, electrical energy supply and metabolic energy consumption. As the amplitude of applied electric field increases by keeping a constant frequency, the membrane potential increases and consequently the electrical energy supply and metabolic energy consumption increases. On increasing the frequency of the applied field, the peak value of membrane potential after depolarization gradually decreases as a result electrical energy supply decreases which results in a lower rate of hydrolysis of ATP molecules.

  3. A Flexible Power Electronics Configuration for Coupling Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Mattia Filippini

    2015-05-01

    Full Text Available A combination of series, parallel and multilevel power electronics has been investigated as a potential interface for two different types of renewable energy sources and in order to reach higher power levels. Renewable energy sources are typically dispersed in a territory, and sources, like wind and solar, allow small to medium-scale generation of electricity. The configuration investigated in this article aims at adapting the coupling solution to the specific generation characteristics of the renewable energy source to make it fit the electrical network. The configuration consists of a combination of three-phase multilevel converters and single-phase inverters, which are designed to provide flexibility, high power quality and high efficiency. A detailed analysis and simulation is performed to identify the properties in conjunction with the electrical grid requirements and the potential challenges encountered during operation. An optimized operation example of wind generation combined with solar PV generation is presented to exemplify the flexibility and benefits of the proposed configuration.

  4. XI Multifrequency Behaviour of High Energy Cosmic Sources Workshop

    Science.gov (United States)

    This was the eleventh edition of the series of Frascati Workshops on "Multifrequency Behaviour of High Energy Cosmic Sources" undoubtedly a largely accepted biennial meeting in which an updated experimental and theoretical panorama is depicted. This edition took place on the 31st anniversary of the first historical "multifrequency" workshop about "Multifrequency Behaviour of Galactic Accreting Sources", held in Vulcano in September 1984. This surely renders the Frascati Workshop Series the oldest among the many devoted to "Multifrequency Studies of Cosmic Sources". The study of the physics governing the cosmic sources was the main goal of the workshop. A session devoted to the ongoing and next generation ground- and space-based experiments gave the actual prospects for the first decades of this millennium. The following items have been reviewed: Cosmology: Cosmic Background, Clusters of Galaxies Extragalactic Sources: Active Galaxies, Normal Galaxies Gamma-Rays Burst: Experiments versus Theories Galactic Sources: Pre-Main-Sequence and Main-Sequence Stars, Cataclysmic Variables and Novae, Supernovae and SNRs, X-Ray Binary Systems, Pulsars, Black Holes, Gamma-Ray Sources,Nucleosynthesis. The Astrophysics with the Ongoing and Future Experiments: Space-Based Experiments, Ground-Based Experiments. The workshop included a few 30-minute general review talks to introduce the current problems, and typically 20-minute talks discussing new experimental and theoretical results. A series of 20-minute talks discussed the ongoing and planned ground- and space-based experiments. The cadence of the workshop is biennial. The participation is only by invitation.

  5. Mono-energy coronary angiography with a compact light source

    Science.gov (United States)

    Eggl, Elena; Mechlem, Korbinian; Braig, Eva; Kulpe, Stephanie; Dierolf, Martin; Günther, Benedikt; Achterhold, Klaus; Herzen, Julia; Gleich, Bernhard; Rummeny, Ernst; Noël, Peter B.; Pfeiffer, Franz; Muenzel, Daniela

    2017-03-01

    While conventional x-ray tube sources reliably provide high-power x-ray beams for everyday clinical practice, the broad spectra that are inherent to these sources compromise the diagnostic image quality. For a monochromatic x-ray source on the other hand, the x-ray energy can be adjusted to optimal conditions with respect to contrast and dose. However, large-scale synchrotron sources impose high spatial and financial demands, making them unsuitable for clinical practice. During the last decades, research has brought up compact synchrotron sources based on inverse Compton scattering, which deliver a highly brilliant, quasi-monochromatic, tunable x-ray beam, yet fitting into a standard laboratory. One application that could benefit from the invention of these sources in clinical practice is coronary angiography. Being an important and frequently applied diagnostic tool, a high number of complications in angiography, such as renal failure, allergic reaction, or hyperthyroidism, are caused by the large amount of iodine-based contrast agent that is required for achieving sufficient image contrast. Here we demonstrate monochromatic angiography of a porcine heart acquired at the MuCLS, the first compact synchrotron source. By means of a simulation, the CNR in a coronary angiography image achieved with the quasi-mono-energetic MuCLS spectrum is analyzed and compared to a conventional x-ray-tube spectrum. The results imply that the improved CNR achieved with a quasi-monochromatic spectrum can allow for a significant reduction of iodine contrast material.

  6. Energy sources and energy generation in the future; Fuentes de energia y la generacion del futuro

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Pelegry, E.

    2001-07-01

    With this article, that gathers the conference imparted inside of the cycle Technologies and Power Supply Development: Gas or Coal, complementary alternatives, organized by the Spanish Club of the Energy (ENERCLUB), the author plants a series of questions over the sources of energy and the its generation in the future, in order to wake the reflections over the theme. (Author)

  7. Optimization of sources for focusing wave energy in targeted formations

    KAUST Repository

    Jeong, C

    2010-06-08

    We discuss a numerical approach for identifying the surface excitation that is necessary to maximize the response of a targeted subsurface formation. The motivation stems from observations in the aftermath of earthquakes, and from limited field experiments, whereby increased oil production rates were recorded and were solely attributable to the induced reservoir shaking. The observations suggest that focusing wave energy to the reservoir could serve as an effective low-cost enhanced oil recovery method. In this paper, we report on a general method that allows the determination of the source excitation, when provided with a desired maximization outcome at the targeted formation. We discuss, for example, how to construct the excitation that will maximize the kinetic energy in the target zone, while keeping silent the neighbouring zones. To this end, we cast the problem as an inverse-source problem, and use a partial-differential- equation-constrained optimization approach to arrive at an optimized source signal. We seek to satisfy stationarity of an augmented functional, which formally leads to a triplet of state, adjoint and control problems. We use finite elements to resolve the state and adjoint problems, and an iterative scheme to satisfy the control problem to converge to the sought source signal. We report on one-dimensional numerical experiments in the time domain involving a layered medium of semi-infinite extent. The numerical results show that the targeted formation\\'s kinetic energy resulting from an optimized wave source could be several times greater than the one resulting from a blind source choice, and could overcome the mobility threshold of entrapped reservoir oil. © 2010 Nanjing Geophysical Research Institute.

  8. Assessment of practices and technologies of energy saving and renewable energy sources in hotels in Crete

    Energy Technology Data Exchange (ETDEWEB)

    Zografakis, Nikolaos [Regional Energy Agency of Crete, Region of Crete, 71202 Heraklion (Greece); Gillas, Konstantinos; Pollaki, Antrianna; Profylienou, Maroulitsa; Bounialetou, Fanouria [Department of Economics, University of Crete, University Campus, 74100 Rethymno (Greece); Tsagarakis, Konstantinos P. [Department of Environmental Engineering, Democritus University of Thrace, 67100 Xanthi (Greece)

    2011-05-15

    This study aims to assess the state of the art of practices and technologies of energy saving and renewable energy sources in hotels. This will contribute to determining the potential of efficient and sustainable energy technologies integration. Hotel managers were interviewed face to face and information sessions were provided. Special energy and environmental awareness campaigns, sectoral tourism programs for climate change mitigation and adaptation, supportive policies and hotel energy investments and renovation programs are some recommendations elicited from the results of this study. (author)

  9. Energy Planning in Selected European Regions - Methods for Evaluating the Potential of Renewable Energy Sources

    OpenAIRE

    Sliz-Szkliniarz, Beata

    2013-01-01

    Given their potentially positive impact on climate protection and the preservation of fossil resources, alternative energy sources have become increasingly important for the energy supply over the past years. However, the questions arises what economic and ecological impacts and potential conflicts over land use resources are associated with the promotion of renewable energy production. Using the examples of three selected European Regions in Poland, France and German, the dissertation discus...

  10. New insights on tsunami genesis and energy source

    Science.gov (United States)

    Song, Y. Tony; Mohtat, Ali; Yim, Solomon C.

    2017-05-01

    Conventional tsunami theories suggest that earthquakes with significant vertical motions are more likely to generate tsunamis. In tsunami models, the vertical seafloor elevation is directly transferred to the sea-surface as the only initial condition. However, evidence from the 2011 Tohoku earthquake indicates otherwise; the vertical seafloor uplift was only 3-5 m, too small to account for the resultant tsunami. Surprisingly, the horizontal displacement was undeniably larger than anyone's expectation; about 60 m at the frontal wedge of the fault plate, the largest slip ever recorded by in situ instruments. The question is whether the horizontal motion of seafloor slopes had enhanced the tsunami to become as destructive as observed. In this study, we provide proof: (1) combining various measurements from the 2011 Tohoku event, we show that the earthquake transferred a total energy of 3.1e + 15 joule to the ocean, in which the potential energy (PE) due to the vertical seafloor elevation (including seafloor uplift/subsidence plus the contribution from the horizontal displacement) was less than a half, while the kinetic energy (KE) due to the horizontal displacement velocity of the continental slope contributed a majority portion; (2) using two modern state-of-the-art wave flumes and a three-dimensional tsunami model, we have reproduced the source energy and tsunamis consistent with observations, including the 2004 Sumatra event. Based on the unified source energy formulation, we offer a competing theory to explain why some earthquakes generate destructive tsunamis, while others do not.

  11. Sustainability of hydropower as source of renewable and clean energy

    Science.gov (United States)

    Luis, J.; Sidek, L. M.; Desa, M. N. M.; Julien, P. Y.

    2013-06-01

    Hydroelectric energy has been in recent times placed as an important future source of renewable and clean energy. The advantage of hydropower as a renewable energy is that it produces negligible amounts of greenhouse gases, it stores large amounts of electricity at low cost and it can be adjusted to meet consumer demand. This noble vision however is becoming more challenging due to rapid urbanization development and increasing human activities surrounding the catchment area. Numerous studies have shown that there are several contributing factors that lead towards the loss of live storage in reservoir, namely geology, ground slopes, climate, drainage density and human activities. Sediment deposition in the reservoir particularly for hydroelectric purposes has several major concerns due to the reduced water storage volume which includes increase in the risk of flooding downstream which directly effects the safety of human population and properties, contributes to economic losses not only in revenue for power generation but also large capital and maintenance cost for reservoir restorations works. In the event of functional loss of capabilities of a hydropower reservoir as a result of sedimentation or siltation could lead to both economical and environmental impact. The objective of this paper is aimed present the importance of hydropower as a source of renewable and clean energy in the national energy mix and the increasing challenges of sustainability.

  12. Biogas : Animal Waste That Can be Alternative Energy Source

    Directory of Open Access Journals (Sweden)

    Tuti Haryati

    2006-09-01

    Full Text Available Biogas is a renewable energy which can be used as alternative fuel to replace fossil fuel such as oil and natural gas . Recently, diversification on the use of energy has increasingly become an important issue because the oil sources are depleting . Utilization of agricultural wastes for biogas production can minimize the consumption of commercial energy source such as kerosene as well as the use of firewood . Biogas is generated by the process of organic material digestion by certain anaerobe bacteria activity in aerobic digester . Anaerobic digestion process is basically carried out in three steps i.e. hydrolysis, acidogenic and metanogenic . Digestion process needs certain condition such as C : N ratio, temperature, acidity and also digester design . Most anaerobic digestions perform best at 32 - 35°C or at 50 - 55°C, and pH 6 .8 - 8 . At these temperatures, the digestion process essentially converts organic matter in the present of water into gaseous energy . Generally, biogas consists of methane about 60 - 70% and yield about 1,000 British Thermal Unit/ft 3 or 252 Kcal/0.028 m3 when burned . In several developing countries, as well as in Europe and the United States, biogas has been commonly used as a subtitute environmental friendly energy . Meanwhile, potentially Indonesia has abundant potential of biomass waste, however biogas has not been used maximally .

  13. Evaluation of the feasibility of alcohols serving as external carbon sources for biological phosphorus removal induced by the oxic/extended-idle regime.

    Science.gov (United States)

    Wang, Dongbo; Zheng, Wei; Li, Xiaoming; Yang, Qi; Liao, Dexiang; Zeng, Guangming

    2013-03-01

    Recently, a novel operational regime (i.e., the oxic/extended-idle [OEI] regime) has been reported to successfully achieve enhanced biological phosphorus removal (EBPR) when employing glucose and volatile fatty acids as the sole substrate. In the OEI regime, polyphosphate accumulating organisms (PAOs) could get a selective advantage over other populations during the extended-idle period where polyphosphate released but polyhydroxyalkanoates and glycogen transformations were negligible/low, thus energy requirements for maintenance purposes in the period could be covered by polyphosphate release. This study further evaluated the feasibility of alcohols as external carbon sources for EBPR induced by the OEI regime, as the available substrate in the raw wastewater is often deficient. First, phosphorus removal in the OEI process was compared, respectively, with methanol and ethanol as the sole substrate. The results showed that the ethanol-reactor achieved 90.8 ± 2.3% of phosphorus removal, which was approximate twofold than the methanol-reactor. Further studies displayed that the cells in the ethanol-reactor contained more PAOs, and had higher activities of exopolyphosphatase and polyphosphate kinase than those in the methanol-reactor. Also, the aerobic transformations of polyhydroxyalkanoates and glycogen in the ethanol-reactor were, respectively, higher and lower than those in the methanol-reactor, which were consistent with the reactors performances. Then, the feasibility of using ethanol as external substrate to enhance EBPR in the OEI process was confirmed for a municipal wastewater. Finally, EBPR performance and metabolic transformation values between the OEI and the anaerobic/oxic (A/O) regimes with ethanol as the sole substrate were compared. The results showed that EBPR in the ethanol-OEI reactor was higher than that in the ethanol-A/O reactor. All the above results proved that ethanol was a favorable external substrate to the OEI regime for EBPR enhancement

  14. Renewable energy sources. European Commission papers; Energies renouvelables. Documents de la Commission Europeenne

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The ''Directive on the Promotion of Electricity from Renewable Sources of Energy in the Internal Electricity Market'' was adopted in September 2001. Its purpose is to promote an increase in the contribution of renewable energy sources to electricity production in the internal market for electricity and to create a basis for a future Community framework. Energie-Cites provides in this document a summary of its opinion on the Green Paper and on Alterner II and gives a proposal for an Action Plan concerning the White Paper. (A.L.B.)

  15. Virtual Generation (Energy Efficiency) The Cheapest Source For Power Generation

    Energy Technology Data Exchange (ETDEWEB)

    Hasnie, Sohail

    2010-09-15

    Energy efficiency is the cheapest source of energy that has escaped the minds of the politicians in the developing countries. This paper argues for large scale utility led end use efficiency programs in a new paradigm, where 1 million efficient light bulbs is synonymous to a 50 MW power station that costs only 2% of the traditional fossil fuel power station and zero maintenance. Bulk procurement, setting up new standards and generation of certified emissions reduction is part of this strategy. It discusses implementation of a $20 million pilot in the Philippines supported by the Asian Development Bank.

  16. Microalgae as a Renewable Source of Energy: A Niche Opportunity

    Directory of Open Access Journals (Sweden)

    Simon Jegan Porphy Jegathese

    2014-01-01

    Full Text Available Algae are believed to be a good source of renewable energy because of its rapid growth rate and its ability to be cultivated in waste water or waste land. Several companies and government agencies are making efforts to reduce capital cost and operating costs and make algae fuel production commercially viable. Algae are the fastest growing plant and theoretically have the potential to produce more oil or biomass per acre when compared to other crops and plants. However, the energy efficiency ratio and carbon and water footprint for algal based biofuels still need to be evaluated in order to fully understand the environmental impact of algal derived biofuels.

  17. Consideration on a Low Power Solar Energy Renewable Source

    Directory of Open Access Journals (Sweden)

    Andrei Marusca

    2008-05-01

    Full Text Available This paper presents the contribution of theauthors regarding the implementation of a low powersolar energy renewable source. To optimize theconversion efficiency of the solar irradiance intoelectrical energy an embedded system was designed. Theembedded system can accomplish the maximum powerpoint tracking by evaluation the output voltage andcurrent of the photovoltaic panels and calculate a propercommand for the DC-DC converter of the renewablesource. The key device in this system is a midrange 8 bitmicrocontroller that consists of acquisition, commandand control integrated hardware resources.

  18. Meeting China's electricity needs through clean energy sources: A 2030 low-carbon energy roadmap

    Science.gov (United States)

    Hu, Zheng

    China is undergoing rapid economic development that generates significant increase in energy demand, primarily for electricity. Energy supply in China is heavily relying on coal, which leads to high carbon emissions. This dissertation explores opportunities for meeting China's growing power demand through clean energy sources. The utilization of China's clean energy sources as well as demand-side management is still at the initial phase. Therefore, development of clean energy sources would require substantial government support in order to be competitive in the market. One of the widely used means to consider clean energy in power sector supplying is Integrated Resource Strategic Planning, which aims to minimize the long term electricity costs while screening various power supply options for the power supply and demand analysis. The IRSP tool tackles the energy problem from the perspective of power sector regulators, and provides different policy scenarios to quantify the impacts of combined incentives. Through three scenario studies, Business as Usual, High Renewable, and Renewable and Demand Side Management, this dissertation identifies the optimized scenario for China to achieve the clean energy target of 2030. The scenarios are assessed through energy, economics, environment, and equity dimensions.

  19. CONCEPT OF THE MINIMUM ENERGY PASSENGER CAR WITH USE OF UNCONVENTIONAL ENERGY SOURCES

    Directory of Open Access Journals (Sweden)

    V. A. Gabrinets

    2014-06-01

    Full Text Available Purpose. The paper is aimed to consider the concept of creation of the minimum energy passenger car with use of nonconventional energy sources and the walls that have enhanced thermal insulation properties. Мethodology. The types of heat losses, as well as their value were analyzed. The alternative sources of energy are considered for heating. Their potential contribution to the overall energy balance of the passenger car is analyzed. Impact on the car design of the enhanced wall thermal insulation, solar energy inflow through the transparent windows and energy release of passengers are quantitatively evaluated. Findings. With the maximum possible use of all unconventional energy sources and the rational scheme solutions of conditioning and heating systems energy the costs for these needs for a passenger car can be reduced by 40-50%. Originality. New types of energy to maintain the heat balance of the car in the winter period is proposed to use firstly. New schematics solutions for environmental control system of the car both in winter and in summer periods were offered. Practical value. Introduction of the proposed scheme solutions and approaches to ensure the comfortable conditions for passengers may be implemented on an existing park of passenger cars and do not require a major re-equipment of systems that have already been installed.

  20. Energy properties of an EMI-Im ionic liquid ion source

    Science.gov (United States)

    Lozano, Paulo C.

    2006-01-01

    The identity and the energy distributions of positive and negative ions electrostatically extracted from the liquid phase in an ionic liquid ion source (ILIS) are analysed with a time-of-flight mass spectrometer and a multi-grid retarding potential analyzer. Accurate energy measurements using ionic liquids in an externally wetted configuration are reported for the first time. Droplet-free beams are produced using the ionic liquid 1-ethyl-3-methylimidazolium bis(triflouromethylsulfonyl)amide (EMI-Im) in which the solvated ions (EMI-Im)nEMI+ and (EMI-Im)nIm- with n = 0,1,2 are observed. The small ion source size and the energy distribution widths and deficits of a few electronvolts are quite similar to those of liquid metal ion sources, confirming that ILIS can be used in applications requiring highly focusable beams, e.g. sub-micron ion lithography. Measurements also suggest that solvated ions with n >= 1 exhibit post-extraction fragmentation into lighter species at a rate increasing with their original degree of solvation. About 10% of the total beam current is carried away by metastable species that break up almost immediately after extraction while inside the emitter accelerating region.

  1. Energy properties of an EMI-Im ionic liquid ion source

    Energy Technology Data Exchange (ETDEWEB)

    Lozano, Paulo C [Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Room 37-438, Cambridge, MA 02139 (United States)

    2006-01-07

    The identity and the energy distributions of positive and negative ions electrostatically extracted from the liquid phase in an ionic liquid ion source (ILIS) are analysed with a time-of-flight mass spectrometer and a multi-grid retarding potential analyzer. Accurate energy measurements using ionic liquids in an externally wetted configuration are reported for the first time. Droplet-free beams are produced using the ionic liquid 1-ethyl-3-methylimidazolium bis(triflouromethylsulfonyl)amide (EMI-Im) in which the solvated ions (EMI-Im){sub n}EMI{sup +} and (EMI-Im){sub n}Im{sup -} with n = 0,1,2 are observed. The small ion source size and the energy distribution widths and deficits of a few electronvolts are quite similar to those of liquid metal ion sources, confirming that ILIS can be used in applications requiring highly focusable beams, e.g. sub-micron ion lithography. Measurements also suggest that solvated ions with n {>=} 1 exhibit post-extraction fragmentation into lighter species at a rate increasing with their original degree of solvation. About 10% of the total beam current is carried away by metastable species that break up almost immediately after extraction while inside the emitter accelerating region.

  2. Theoretical foundations of search for essentially new sources of energy production

    Energy Technology Data Exchange (ETDEWEB)

    Smolenskii, E.A.; Shpilkin, S.A.; Pivina, T.S.; Maslova, L.K.; Chuvylkin, N.D. [N.D. Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences, Moscow (Russian Federation)

    1996-12-31

    During the last years, an essentially new theory of multielectron systems was elaborated at the N.D Zelinsky Institute of Organic Chemistry. This theory analyzes the relationship between the structure of the symmetrical permutation group and the topological structure of the configuration space and makes it possible to perform complete separation of spin and spatial variables for multiparticle wave functions and to construct trial wave functions of the variational method using a prior postulated modal surfaces. Suggested hypothesis about the form of nodal surfaces permits one to find these surfaces for arbitrary multielectron systems and creates a possibility to consider the states of atoms and molecules in strong external fields and to search for possible new energetic states of these systems which could be used as a source of energy or as a means of energy storage. (authors) 13 refs.

  3. Overcoming High Energy Backgrounds at Pulsed Spallation Sources

    CERN Document Server

    Cherkashyna, Nataliia; DiJulio, Douglas D.; Khaplanov, Anton; Pfeiffer, Dorothea; Scherzinger, Julius; Cooper-Jensen, Carsten P.; Fissum, Kevin G.; Ansell, Stuart; Iverson, Erik B.; Ehlers, Georg; Gallmeier, Franz X.; Panzner, Tobias; Rantsiou, Emmanouela; Kanaki, Kalliopi; Filges, Uwe; Kittelmann, Thomas; Extegarai, Maddi; Santoro, Valentina; Kirstein, Oliver; Bentley, Phillip M.

    2015-01-01

    Instrument backgrounds at neutron scattering facilities directly affect the quality and the efficiency of the scientific measurements that users perform. Part of the background at pulsed spallation neutron sources is caused by, and time-correlated with, the emission of high energy particles when the proton beam strikes the spallation target. This prompt pulse ultimately produces a signal, which can be highly problematic for a subset of instruments and measurements due to the time-correlated properties, and different to that from reactor sources. Measurements of this background have been made at both SNS (ORNL, Oak Ridge, TN, USA) and SINQ (PSI, Villigen, Switzerland). The background levels were generally found to be low compared to natural background. However, very low intensities of high-energy particles have been found to be detrimental to instrument performance in some conditions. Given that instrument performance is typically characterised by S/N, improvements in backgrounds can both improve instrument pe...

  4. A narrow-band, variable energy ion source derived from a wire plasma source

    Energy Technology Data Exchange (ETDEWEB)

    Gueroult, R; Elias, P Q; Packan, D [ONERA Palaiseau, 91761 Palaiseau (France); Rax, J M, E-mail: renaud.gueroult@polytechnique.edu [LPP, Ecole Polytechnique, 91128 Palaiseau Cedex (France)

    2011-08-15

    A low pressure wire-induced plasma source (WIPS) operated in its high-pressure mode ({approx}10{sup -2} mbar) exhibits a narrow ion energy distribution function peaked at an energy corresponding to the discharge voltage. In order to take advantage of this peculiar feature, we design an electrode geometry enabling the acceleration of ions extracted from a WIPS. Probing of the obtained ion plume by means of a retarding potential analyser (RPA) demonstrates the capability of such an ion source to generate narrow-band (full width at half maximum of about 20 eV), variable energy (1 to 5 keV) ion beams. Comparison with particle-in-cell simulations of the WIPS shows that the energy spread of these ion beams is actually about 10 eV, the slight broadening being mainly the effect of the limited planar RPA energy resolution. The ion beam spot size measured at 6 cm of the ion source exit is about 3 mm for a 10 {mu}A He{sup +} beam at 2 keV, with a divergence of about one degree. Operating the WIPS in argon and xenon leads to similar properties for Ar{sup +} and Xe{sup +} beams, and in principle other species could also be used.

  5. Directory of financing sources for foreign energy projects

    Energy Technology Data Exchange (ETDEWEB)

    La Ferla, L. [La Ferla Associates, Washington, DC (United States)

    1995-09-01

    The Office of National Security Policy has produced this Directory of Financing Sources for Foreign Energy Projects. The Directory reviews programs that offer financing from US government agencies, multilateral organizations, public, private, and quasi-private investment funds, and local commercial and state development banks. The main US government agencies covered are the US Agency for International Development (USAID), the Export-Import Bank of the US (EXIM Bank), Overseas Private Investment Corporation (OPIC), US Department of Energy, US Department of Defense, and the US Trade and Development Agency (TDA). Other US Government Sources includes market funds that have been in part capitalized using US government agency funds. Multilateral organizations include the World Bank, International Finance Corporation (IFC), Asian Development Bank (ADB), European Bank for Reconstruction and Development (EBRD), and various organizations of the United Nations. The Directory lists available public, private, and quasi-private sources of financing in key emerging markets in the Newly Independent States and other developing countries of strategic interest to the US Department of Energy. The sources of financing listed in this directory should be considered indicative rather than inclusive of all potential sources of financing. Initial focus is on the Russian Federation, Ukraine, india, China, and Pakistan. Separate self-contained sections have been developed for each of the countries to enable the user to readily access market-specific information and to support country-specific Departmental initiatives. For each country, the directory is organized to follow the project life cycle--from prefeasibility, feasibility, project finance, cofinancing, and trade finance, through to technical assistance and training. Programs on investment and export insurance are excluded.

  6. Did high energy astrophysical sources contribute to Martian atmospheric loss?

    CERN Document Server

    Atri, Dimitra

    2016-01-01

    Mars is believed to have had a substantial atmosphere in the past. Atmospheric loss led to depressurization and cooling, and is thought to be the primary driving force responsible for the loss of liquid water from its surface. Recently, MAVEN observations have provided new insight into the physics of atmospheric loss induced by ICMEs and solar wind interacting with the Martian atmosphere. In addition to solar radiation, it is likely that its atmosphere has been exposed to radiation bursts from high-energy astrophysical sources which become highly probable on timescales of ~Gy and beyond. These sources are capable of significantly enhancing the rates of photoionization and charged particle-induced ionization in the upper atmosphere. Here, we explore the possibility of damage from Galactic Gamma Ray Bursts, nearby supernovae, encounter with dense interstellar clouds and extreme solar events. We use Monte Carlo simulations to model the interaction of charged particles and photons from astrophysical sources in th...

  7. ION SOURCES FOR ENERGY EXTREMES OF ION IMPLANTATION.

    Energy Technology Data Exchange (ETDEWEB)

    HERSCHCOVITCH,A.; JOHNSON, B.M.; BATALIN, V.A.; KROPACHEV, G.N.; KUIBEDA, R.P.; KULEVOY, T.V.; KOLOMIETS, A.A.; PERSHIN, V.I.; PETRENKO, S.V.; RUDSKOY, I.; SELEZNEV, D.N.; BUGAEV, A.S.; GUSHENETS, V.I.; LITOVKO, I.V.; OKS, E.M.; YUSHKOV, G. YU.; MASEUNOV, E.S.; POLOZOV, S.M.; POOLE, H.J.; STOROZHENKO, P.A.; SVAROVSKI, YA.

    2007-08-26

    For the past four years a joint research and development effort designed to develop steady state, intense ion sources has been in progress with the ultimate goal to develop ion sources and techniques, which meet the two energy extreme range needs of mega-electron-volt and 100's of electron-volt ion implanters. This endeavor has already resulted in record steady state output currents of high charge state of Antimony and Phosphorous ions: P{sup 2+} (8.6 pmA), P{sup 3+} (1.9 pmA), and P{sup 4+} (0.12 pmA) and 16.2, 7.6, 3.3, and 2.2 pmA of Sb{sup 3+} Sb{sup 4+}, Sb{sup 5+}, and Sb{sup 6+} respectively. For low energy ion implantation our efforts involve molecular ions and a novel plasmaless/gasless deceleration method. To date, 1 emA of positive Decaborane ions were extracted at 10 keV and smaller currents of negative Decaborane ions were also extracted. Additionally, Boron current fraction of over 70% was extracted from a Bemas-Calutron ion source, which represents a factor of 3.5 improvement over currently employed ion sources.

  8. Ion sources for energy extremes of ion implantation.

    Science.gov (United States)

    Hershcovitch, A; Johnson, B M; Batalin, V A; Kropachev, G N; Kuibeda, R P; Kulevoy, T V; Kolomiets, A A; Pershin, V I; Petrenko, S V; Rudskoy, I; Seleznev, D N; Bugaev, A S; Gushenets, V I; Litovko, I V; Oks, E M; Yushkov, G Yu; Masunov, E S; Polozov, S M; Poole, H J; Storozhenko, P A; Svarovski, A Ya

    2008-02-01

    For the past four years a joint research and development effort designed to develop steady state, intense ion sources has been in progress with the ultimate goal to develop ion sources and techniques that meet the two energy extreme range needs of meV and hundreads of eV ion implanters. This endeavor has already resulted in record steady state output currents of high charge state of antimony and phosphorus ions: P(2+) [8.6 pmA (particle milliampere)], P(3+) (1.9 pmA), and P(4+) (0.12 pmA) and 16.2, 7.6, 3.3, and 2.2 pmA of Sb(3+)Sb(4+), Sb(5+), and Sb(6+) respectively. For low energy ion implantation, our efforts involve molecular ions and a novel plasmaless/gasless deceleration method. To date, 1 emA (electrical milliampere) of positive decaborane ions was extracted at 10 keV and smaller currents of negative decaborane ions were also extracted. Additionally, boron current fraction of over 70% was extracted from a Bernas-Calutron ion source, which represents a factor of 3.5 improvement over currently employed ion sources.

  9. Evaluating the sustainability of an energy supply system using renewable energy sources: An energy demand assessment of South Carolina

    Science.gov (United States)

    Green, Cedric Fitzgerald

    Sustainable energy is defined as a dynamic harmony between the equitable availability of energy-intensive goods and services to all people and the preservation of the earth for future generations. Sustainable energy development continues to be a major focus within the government and regulatory governing bodies in the electric utility industry. This is as a result of continued demand for electricity and the impact of greenhouse gas emissions from electricity generating plants on the environment by way of the greenhouse effect. A culmination of increasing concerns about climate change, the nuclear incident in Fukushima four years ago, and discussions on energy security in a world with growing energy demand have led to a movement for increasing the share of power generation from renewable energy sources. This work studies demand for electricity from primarily residential, commercial, agricultural, and industrial customers in South Carolina (SC) and its effect on the environment from coal-fired electricity generating plants. Moreover, this work studies sustainable renewable energy source-options based on the renewable resources available in the state of SC, as viable options to supplement generation from coal-fired electricity generating plants. In addition, greenhouse gas emissions and other pollutants from primarily coal-fired plants will be defined and quantified. Fundamental renewable energy source options will be defined and quantified based on availability and sustainability of SC's natural resources. This work studies the environmental, economic, and technical aspects of each renewable energy source as a sustainable energy option to replace power generation from coal-fired plants. Additionally, social aspect implications will be incorporated into each of the three aspects listed above, as these aspects are explored during the research and analysis. Electricity demand data and alternative energy source-supply data in SC are carried out and are used to develop and

  10. Dietary sources of energy and macronutrient intakes among Flemish preschoolers.

    Science.gov (United States)

    De Keyzer, Willem; Lin, Yi; Vereecken, Carine; Maes, Lea; Van Oyen, Herman; Vanhauwaert, Erika; De Backer, Guy; De Henauw, Stefaan; Huybrechts, Inge

    2011-11-01

    This study aims to identify major food sources of energy and macronutrients among Flemish preschoolers as a basis for evaluating dietary guidelines. Three-day estimated diet records were collected from a representative sample of 696 Flemish preschoolers (2.5-6.5 years old; participation response rate: 50%). For 11 dietary constituents, the contribution of 57 food groups was computed by summing the amount provided by the food group for all individuals divided by the total intake of the respective nutrient for all individuals. Bread (12%), sweet snacks (12%), milk (6%), flavoured milk drinks (9%), and meat products (6%) were the top five energy contributors. Sweet snacks were among the top contributors to energy, total fat, all fatty acids, cholesterol, and complex and simple carbohydrates. Fruit juices and flavoured milk drinks are the main contributors to simple carbohydrates (respectively 14% and 18%). All principal food groups like water, bread and cereals, vegetables, fruit, milk and spreadable fats were under-consumed by more than 30% of the population, while the food groups that were over-consumed consisted only of low nutritious and high energy dense foods (sweet snacks, sugared drinks, fried potatoes, sauces and sweet spreads). From the major food sources and gaps in nutrient and food intakes, some recommendations to pursue the nutritional goals could be drawn: the intake of sweet snacks and sugar-rich drinks (incl. fruit juices) should be discouraged, while consumption of fruits, vegetables, water, bread and margarine on bread should be encouraged.

  11. Promotion of Renewable Energy Sources in the European Union

    Directory of Open Access Journals (Sweden)

    Roland Menges

    2015-10-01

    Full Text Available One of the important goals of European energy policy is to increase the share of renewable energy resources in the energy supply. The instruments used in the member states are not fully compatible with the rules of the European internal market. In a theoretical section, this paper analyses possible different instruments for promoting renewable energy. Some countries use feed in tariffs - using fixed prices to increase incentives for producers to invest into renewable energy, other countries use quantity-based systems like quotas that lead to a premium above the market price. In an institutional analysis we show that on the basis of effectiveness and efficiency considerations for the European Union, in the long-term quantity oriented systems of promotion are preferable if combined with elements of a capacity market. The main reason for this conclusion is that price-based systems cannot give enough incentives for backup capacities necessary to cope with intermittent production of renewable sources. In addition price-based systems violate the basic rules of the open internal European market because feed in tariffs are a considerable barrier for trade of renewable energy products.

  12. Alternate Energy Sources for Thermalplastic Binding Agent Consolidation

    Energy Technology Data Exchange (ETDEWEB)

    Frame, B.J.

    1999-01-01

    A study was conducted to investigate microwave and electron beam technologies as alternate energy sources to consolidate fiber coated with a thermoplastic binding agent into preforms for composite molding applications. Bench experiments showed that both microwave and electron beam energy can produce heat sufficient to melt and consolidate a thermoplastic binding agent applied to fiberglass mat, and several two- and three-dimensional fiberglass preforms were produced with each method. In both cases, it is postulated that the heating was accomplished by the effective interaction of the microwave or electron beam energy with the combination of the mat preform and the tooling used to shape the preform. Both methods contrast with conventional thermal energy applied via infrared heaters or from a heated tool in which the heat to melt the thermoplastic binding agent must diffuse over time from the outer surface of the preform toward its center under a thermal gradient. For these reasons, the microwave and electron beam energy techniques have the potential to rapidly consolidate thick fiber preforms more efficiently than the thermal process. With further development, both technologies have the potential to make preform production more cost effective by decreasing cycle time in the preform tool, reducing energy costs, and by enabling the use of less expensive tooling materials. Descriptions of the microwave and electron beam consolidation experiments and a summary of the results are presented in this report.

  13. Renewable energy sources in the Mexican electrical sector

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, V. [Univ. Nacional Autonoma de Mexico, Div. de Estudios de Postrado, Facultad de Ingenieria, Coyoacan (Mexico); Martinez, J.H. [Univ. Nacional Autonoma de Mexico, Posgrado en Estudios Latinoamericanos, Facultad de Filosofia y Letras, Div. de Estudios de Posgrado, Coyoacan (Mexico); Ruiz, B.J.

    2008-07-01

    This paper analyzes the role of the renewable energy sources (RES) in the Mexican electrical sector in the context of the proposed renewable energy bill currently under consideration in the Mexican Congress. This paper was divided in three parts. The first part consists of a chronology of institutional background related to RES. The second part is an analysis of the coordination and management system of the Mexican electrical sector, which can facilitate the promotion of RES without significant structural changes. Finally, the pros and cons of the renewable energy bill are analyzed in order to demonstrate the need for greater coherence between the bill and the coordination system. It is concluded that when inconsistency is eliminated, RES would strongly be promoted in Mexico. (orig.)

  14. The Potential of Renewable Energy Sources in Latvia

    Science.gov (United States)

    Sakipova, S.; Jakovics, A.; Gendelis, S.

    2016-02-01

    The article discusses some aspects of the use of renewable energy sources in the climatic conditions prevailing in most of the territory of Latvia, with relatively low wind speeds and a small number of sunny days a year. The paper gives a brief description of the measurement equipment and technology to determine the parameters of the outer air; the results of the measurements are also analysed. On the basis of the data obtained during the last two years at the meteorological station at the Botanical Garden of the University of Latvia, the energy potential of solar radiation and wind was estimated. The values of the possible and the actual amount of produced energy were determined.

  15. Renewable energy sources in the Mexican electricity sector

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, B.J.; Rodriguez-Padilla, V. [Universidad Nacional Autonoma de Mexico, DEPFI, Edificio A 1 piso Bernardo Quintana, Circuito Exterior, C.U., Coyoacan, C.P. (Mexico); Martinez, J.H. [Universidad Nacional Autonoma de Mexico, Posgrado en Estudios Latinoamericanos, Facultad de Filosofia y Letras, Division de Estudios de Posgrado, Circuito Exterior, C.U., Coyoacan (Mexico)

    2008-06-15

    This paper analyzes the role of renewable energy sources (RES) in the Mexican electricity sector in the context of the proposed renewable energy bill currently under consideration in the Mexican Congress. This paper was divided into three parts. The first part presents a chronology of institutional background related to the RES. This is followed by an analysis of the coordination and management system of the Mexican electricity sector, which can facilitate the promotion and integration of the RES without significant structural changes. Finally, the pros and cons of the renewable energy bill are analyzed in order to demonstrate the need for greater coherence between the bill and the coordination system of the sector. It is concluded that when inconsistency is eliminated, RES would strongly be promoted in Mexico. (author)

  16. The Use of Energy in Malaysia: Tracing Energy Flows from Primary Source to End Use

    OpenAIRE

    Chinhao Chong; Weidou Ni; Linwei Ma; Pei Liu; Zheng Li

    2015-01-01

    Malaysia is a rapidly developing country in Southeast Asia that aims to achieve high-income country status by 2020; its economic growth is highly dependent on its abundant energy resources, especially natural gas and crude oil. In this paper, a complete picture of Malaysia’s energy use from primary source to end use is presented by mapping a Sankey diagram of Malaysia’s energy flows, together with ongoing trends analysis of the main factors influencing the energy flows. The results indicate t...

  17. Energy and health: the health impacts of present and alternative energy sources and policies

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, L.D.

    1975-01-01

    The total emissions to the atmosphere in the United States in 1971 for carbon dioxide, particulates, 1971 are shown for caron monoxide, sulfur dioxide, hydrocarbons, and nitrogen oxides are shown. The Reference Energy System (RES) developed at BNL diagrams the methodological approach used to study the health and environmental impacts of energy. The RES takes each energy source--nuclear, hydropower, coal, oil, and natural gas--and traces it through each of the stages in the fuel cycle to its conversion at the electric power stations to its end use. In calculating the health/environmental costs of any given energy source, the entire range of production and use of that source are included. Comparative statements are given about many energy sources regarding their risks to health. An example is described of an effects module of sulfur oxides in air. Sulfur emission released into air ultimately affects biota and materials in buildings and other structures via several different pathways; it operates directly or after various chemical transformations in the smokestack, and then in the atmosphere. An effects module is provided for suspended solids into water. The use of this design for a new technology may be applied to minimize its potential environmental impact. It is designed to help the regulatory agencies, the EPA, and the NRC to set standards for new and existing technologies that have some relationship to actual risk. The author then discusses some assessments of energy problems, with emphasis on nuclear power impacts. (MCW)

  18. Energy cost of balance control during walking decreases with external stabilizer stiffness independent of walking speed

    NARCIS (Netherlands)

    Ijmker, Trienke; Houdijk, Han; Lamoth, Claudine J. C.; Beek, Peter J.; van der Woude, Lucas H. V.

    2013-01-01

    Human walking requires active neuromuscular control to ensure stability in the lateral direction, which inflicts a certain metabolic load. The magnitude of this metabolic load has previously been investigated by means of passive external lateral stabilization via spring-like cords. In the present

  19. Renewable energy and negative externalities: the effect of wind turbines on house prices

    NARCIS (Netherlands)

    Dröes, M.I.; Koster, H.R.A.

    2014-01-01

    In many countries, wind turbines are constructed as part of a strategy to reduce dependence on fossil fuels. In this paper, we measure the external effect of wind turbines on the transaction prices of nearby houses. A unique house price dataset covering the period 1985-2011 is used, including the ex

  20. The European Union and Russian energy politics. External energy relations and interdependency between the European Union and Russia

    Energy Technology Data Exchange (ETDEWEB)

    Akca Prill, Melek

    2012-07-01

    The European Union and Russia Energy Politics aims to analyse the energy relationships, energy foreign policy and energy dialogue between the European Union Member States and the Russian Federation. To understand the recent developments in Russian - European Union energy relations better, the study aims to assert the disciplines and approaches of international relations in the example of Russia and the European Union systems of government. The important question here, whether diversification of energy supplier or energy supply routes is possible. If there is a possibility to diversify the supplier, is this then too costly to build, operate and rely on new pipeline routes? More crucial issue is, whether Russia is a reliable energy supplier in terms of European Energy Security approach. Throughout these assumptions, the role and vision of European Union Member States, the possible energy exporter countries, their policies and contributions are going to be discussed.

  1. POWER QUALITY IMPROVEMENT FOR WIND ENERGY CONVERSION SYSTEM USING PMSG AND Z-SOURCE INVERTER

    Directory of Open Access Journals (Sweden)

    E.Rajendran

    2013-04-01

    Full Text Available Wind energy is a prominent area of application of variable-speed generators operating on the constant grid frequency. This paper describes the operation and control of permanent magnet synchronous generator (PMSG. This generator is connected to the power network by means of a z-source inverter. Permanent-magnet synchronous generators are used by these technologies due to special characteristics of PMSG such as low weight and volume, high performance, and no need of external power supply for permanent magnet excitation. The PMSG overcome the Induction Generator and other generators, owing to it can perform without absorb the grid power. But Induction Generator needs grid connection for getting power to start. Z-Source Inverter has both buck and boost capabilities as they allow operation of the inverter in the shoot through state. It has Z-Source Network which connects inverter to DC source. By controlling the shoot-through state of IGBTs in the inverter system, minimize the line harmonics, increase power factor, and improves output voltage range. This Paper presents maximum constant boost control with third harmonic injection switching technique for z- source inverter.

  2. AC Motor Drive Fed by Renewable Energy Sources with PWM

    Directory of Open Access Journals (Sweden)

    J. Pavalam

    2014-01-01

    Full Text Available In this fast aproaching nature of technology the ned of Electricity becomes a mandatory in developing technology. The ned of Electricity increases the power demand where the power demand met by the conventional sources of energy has some disadvantage of polution, this disadvantage can be decreased by the use of the Renewable energy sources like Fuel Cel and available solar energy. When a FUEL cel produces AC power, basicaly two stages are required for conversion first a bosting stage and second is inversion stage. In this paper the Bost inverter topology is achieved where in the conventional methods the normal DC - AC power conversion method is used where as in this paper the PWM based DC - AC inverter has ben used which is useful in reducing the harmonics in the output of the Inverter. The voltage controled output is produced in the bost inverter the curent controled output is taken from dc-dc bidirectional converter. The Fuel cel canot be relied as a whole so a Solar PV module is conected acros the Load so while the Sunlight days the PV arays generate power and in the night time the Fuel cel is used to generate power for the load. Since, the Fuel cel and PV arays can generate power in Partial load they are prefered than any other sources. When the output from the Solar PV aray is low or when the sunlight available is not eficient in generating the power a automatic switch over is provided in the junction betwen the Solar PV aray and Fuel cel so that whenever it hapens the switch automaticaly switch over to another source. The simulation results are presented to confirm the operational feature of the proposed system.

  3. OSeMOSYS: The Open Source Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    Howells, Mark, E-mail: mark.i.howells@gmail.com [Royal Institute of Technology (KTH) (Sweden); Rogner, Holger [Planning and Economic Studies Section, International Atomic Energy Agency (Austria); Strachan, Neil [Energy Institute, University College London (United Kingdom); Heaps, Charles [Stockholm Environmental Institute (SEI) (United States); Huntington, Hillard [Stanford University (United States); Kypreos, Socrates [Paul Scherrer Institute (Switzerland); Hughes, Alison [Energy Research Centre, University of Cape Town (South Africa); Silveira, Semida [Royal Institute of Technology (KTH) (Sweden); DeCarolis, Joe [North Carolina State University (United States); Bazillian, Morgan [United Nations Industrial Development Organization (UNIDO) (Austria); Roehrl, Alexander [United Nations Department of Economic and Social Affairs (UNDESA) (United States)

    2011-10-15

    This paper discusses the design and development of the Open Source Energy Modeling System (OSeMOSYS). It describes the model's formulation in terms of a 'plain English' description, algebraic formulation, implementation-in terms of its full source code, as well as a detailed description of the model inputs, parameters, and outputs. A key feature of the OSeMOSYS implementation is that it is contained in less than five pages of documented, easily accessible code. Other existing energy system models that do not have this emphasis on compactness and openness makes the barrier to entry by new users much higher, as well as making the addition of innovative new functionality very difficult. The paper begins by describing the rationale for the development of OSeMOSYS and its structure. The current preliminary implementation of the model is then demonstrated for a discrete example. Next, we explain how new development efforts will build on the existing OSeMOSYS codebase. The paper closes with thoughts regarding the organization of the OSeMOSYS community, associated capacity development efforts, and linkages to other open source efforts including adding functionality to the LEAP model. - Highlights: > OSeMOSYS is a new free and open source energy systems. > This model is written in a simple, open, flexible and transparent manner to support teaching. > OSeMOSYS is based on free software and optimizes using a free solver. > This model replicates the results of many popular tools, such as MARKAL. > A link between OSeMOSYS and LEAP has been developed.

  4. Multi-port power electronic interface for renewable energy sources

    Science.gov (United States)

    Jiang, Wei

    Energy intensive products and services are penetrating people's daily life as well as different sectors of industry during recent decades. Further effort to improve efficiency, reduce green house gas and hazardous particle emission lead to the emergence of the "more electric" concept in several industries including transportation. This trend, however, burdens the aging power system and existing local power networks. To offer a remedy to the problem and a smooth transition to a more reliable, more diverse, and more efficient power grid of the future, the concept of Multi-port Power Electronic Interface (MPEI) for localized power processing is introduced in this dissertation, which interfaces and manages various sources, loads and storages. Different means of integrating multiple sources and storages into the existing power system are studied and evaluated; the six phase-leg structure is chosen to interface five sources/loads: fuel cell, wind turbine, solar cell, battery and utility grid. Partitioning of source-interface and load-interface on a system level as well as analysis and modeling on small signal level are performed. A novel control structure for source-interface is proposed in the design, which forms Controlled Quasi Current Source (CQCS) during the load sharing operation and offers several salient advantages: • Inherent average current-mode control. • Easy share of steady state current/power. • Share of load dynamics for better source protection. Local control loops for various input ports are designed based on linearized system model; controller performance is tuned to accommodate the characteristics of different sources. To maintain a sustainable operation, different modes of operation are defined for MPEI; detailed state-transition with associated events are also defined in each operation mode. Prototype of MPEI is built and control system is implemented digitally in a digital signal processor; steady state and transient performance of MPEI is

  5. Designing a Model for the Glogbal Energy System—GENeSYS-MOD: An Application of the Open-Source Energy Modeling System (OSeMOSYS

    Directory of Open Access Journals (Sweden)

    Konstantin Löffler

    2017-09-01

    Full Text Available This paper develops a path for the global energy system up to 2050, presenting a new application of the open-source energy modeling system (OSeMOSYS to the community. It allows quite disaggregate energy and emission analysis: Global Energy System Model (GENeSYS-MOD uses a system of linear equations of the energy system to search for lowest-cost solutions for a secure energy supply, given externally defined constraints, mainly in terms of CO2-emissions. The general algebraic modeling system (GAMS version of OSeMOSYS is updated to the newest version and, in addition, extended and enhanced to include e.g., a modal split for transport, an improved trading system, and changes to storages. The model can be scaled from small-scale applications, e.g., a company, to cover the global energy system. The paper also includes an application of GENeSYS-MOD to analyze decarbonization scenarios at the global level, broken down into 10 regions. Its main focus is on interdependencies between traditionally segregated sectors: electricity, transportation, and heating; which are all included in the model. Model calculations suggests that in order to achieve the 1.5–2 °C target, a combination of renewable energy sources provides the lowest-cost solution, solar photovoltaic being the dominant source. Average costs of electricity generation in 2050 are about 4 €cents/kWh (excluding infrastructure and transportation costs.

  6. Cyanate - An overlooked energy and nitrogen source in soils?

    Science.gov (United States)

    Mooshammer, Maria; Palatinszky, Márton; Herbold, Craig; Han, Ping; Daims, Holger; Richter, Andreas; Wagner, Michael

    2016-04-01

    Cyanate (NCO-) is a reduced nitrogen compound that is toxic to organisms due to its reactivity with nucleophilic groups in proteins. To lower cyanate concentrations within cells, a wide range of microorganisms possess a cyanase, which catalyzes the conversion of cyanate to ammonium and carbon dioxide. However, cyanate can also be useful for microbes by serving as a nitrogen source for cyanase-encoding microorganism, such as marine cyanobacteria (Kamennaya et al., 2008). Unexpectedly, we could recently demonstrate that at least one ammonia-oxidizing thaumarchaeote as well as nitrite-oxidizers thriving in consortia with ammonia-oxidizers can grow aerobically on cyanate as only energy and nitrogen source (Palatinszky et al., 2015). Furthermore, published metagenomes revealed that cyanase-encoding genes closely related to those of nitrifiers (ammonia- and nitrite-oxidizers) are widespread in the environment and encompass also cyanases affiliated with anammox organisms. Therefore, cyanate presumably presents an alternative nitrogen and also energy source for many microorganisms in aquatic and terrestrial environments. Surprisingly, cyanate concentrations and fluxes in natural environments are largely unknown, and environmental cyanate concentrations have only been studied in seawater so far, where it occurs in the nanomolar-range (Widner et al. 2013). No information about the importance of cyanate in soils is available, although urea that spontaneously decomposes to cyanate is the most used agricultural fertilizer on a global scale. Cyanate can have many fates in soils - it can be (1) used as nitrogen and/or energy source by cyanase-encoding microorganisms, (2) abiotically hydrolysed to ammonium and carbon dioxide, (3) adsorbed to soil particles, or (4) complexed with other compounds. Here we present the first measurements of cyanate concentrations in natural soils and results of experiments designed to differentiate between biotic and abiotic degradation of cyanate in

  7. Multi-wavelength identification of high-energy sources

    CERN Document Server

    Mignani, R P

    2009-01-01

    The nature of most of the ~300 high-energy gamma-ray sources discovered by the EGRET instrument aboard the Gamma-ray Observatory (GRO) between 1991 and 1999 is one of the greatest enigmas in high-energy astrophysics. While about half of the extragalactic sources have been optically identified with Active Galactic Nuclei (AGN), only a meagre 10% of the galactic sources have a reliable identification. This low success rate has mainly to be ascribed to the local crowding of potential optical counterparts and to the large gamma-ray error boxes (of the order of one degree in radius) which prevented a straightforward optical identification. Indeed, a multi-wavelength identification strategy, based on a systematic coverage of the gamma-ray error boxes, has been the only do-able approach. The situation is now greatly improving thanks to the observations performed by the Fermi Gamma-ray Space Telescope which, thanks to the LAT instrument, provides a factor of 50 improvement in sensitivity and a factor of 10 improvemen...

  8. A low-energy linear oxygen plasma source

    Energy Technology Data Exchange (ETDEWEB)

    Anders, Andre; Yushkov, Georgy Yu.

    2007-01-08

    A new version of a Constricted Plasma Source is described,characterized by all metal-ceramic construction, a linear slit exit of180 mm length, and cw-operation (typically 50 kHz) at an average power of1.5 kW. The plasma source is here operated with oxygen gas, producingstreaming plasma that contains mainly positive molecular and atomic ions,and to a much lesser degree, negative ions. The maximum total ion currentobtained was about 0.5 A. The fraction of atomic ions reached more than10 percent of all ions when the flow rate was less then 10 sccm O2,corresponding to a chamber pressure of about 0.5 Pa for the selectedpumping speed. The energy distribution functions of the different ionspecies were measured with a combinedmass spectrometer and energyanalyzer. The time-averaged distribution functions were broad and rangedfrom about 30eV to 90 eV at 200 kHz and higher frequencies, while theywere only several eV broad at 50 kHz and lower frequencies, with themaximum located at about 40 eV for the grounded anode case. This maximumwas shifted down to about 7 eV when the anode was floating, indicatingthe important role of the plasma potential for the ion energy for a givensubstrate potential. The source could be scaled to greater length and maybe useful for functionalization of surfaces and plasma-assisteddeposition of compound films.

  9. Towards fusion energy as a sustainable energy source: Activities at DTU Physics

    DEFF Research Database (Denmark)

    Rasmussen, Jesper; Christensen, Alexander Simon; Dam, Magnus

    2014-01-01

    Nuclear fusion – the process from which the Sun derives its energy – holds the potential to become a clean,safe, highly efficient, and virtually inexhaustible energy source for the future. To mimic this process on earth, experimental fusion devices seek to heat gas to millions of degrees (creating...... a fusion plasma) and to confine it within magnetic fields. Learning how such plasmas behave and can be controlled is a crucial step towards realizing fusion as a sustainable energy source.At the Plasma Physics and Fusion Energy (PPFE) section at DTU Physics, we are exploring these issues,focusing on areas...... of high priority on the way towards a working fusion power plant. On the theoreticalfront, we are simulating plasma turbulence and transport of heat and particles in fusion plasmas (Fig. 1a). These issues play a key role in determining how the plasma behaves globally and how well it remains confined...

  10. ECR ion source based low energy ion beam facility

    Indian Academy of Sciences (India)

    P Kumar; G Rodrigues; U K Rao; C P Safvan; D Kanjilal; A Roy

    2002-11-01

    Mass analyzed highly charged ion beams of energy ranging from a few keV to a few MeV plays an important role in various aspects of research in modern physics. In this paper a unique low energy ion beam facility (LEIBF) set up at Nuclear Science Centre (NSC) for providing low and medium energy multiply charged ion beams ranging from a few keV to a few MeV for research in materials sciences, atomic and molecular physics is described. One of the important features of this facility is the availability of relatively large currents of multiply charged positive ions from an electron cyclotron resonance (ECR) source placed entirely on a high voltage platform. All the electronic and vacuum systems related to the ECR source including 10 GHz ultra high frequency (UHF) transmitter, high voltage power supplies for extractor and Einzel lens are placed on a high voltage platform. All the equipments are controlled using a personal computer at ground potential through optical fibers for high voltage isolation. Some of the experimental facilities available are also described.

  11. Gridless, very low energy, high-current, gaseous ion source

    Energy Technology Data Exchange (ETDEWEB)

    Vizir, A. V.; Oks, E. M. [High Current Electronics Institute, Russian Academy of Sciences, Tomsk 634055 (Russian Federation); State University of Control Systems and Radioelectronics, Tomsk 634050 (Russian Federation); Shandrikov, M. V.; Yushkov, G. Yu. [High Current Electronics Institute, Russian Academy of Sciences, Tomsk 634055 (Russian Federation)

    2010-02-15

    We have made and tested a very low energy gaseous ion source in which the plasma is established by a gaseous discharge with electron injection in an axially diverging magnetic field. A constricted arc with hidden cathode spot is used as the electron emitter (first stage of the discharge). The electron flux so formed is filtered by a judiciously shaped electrode to remove macroparticles (cathode debris from the cathode spot) from the cathode material as well as atoms and ions. The anode of the emitter discharge is a mesh, which also serves as cathode of the second stage of the discharge, providing a high electron current that is injected into the magnetic field region where the operating gas is efficiently ionized. In this discharge configuration, an electric field is formed in the ion generation region, accelerating gas ions to energy of several eV in a direction away from the source, without the use of a gridded acceleration system. Our measurements indicate that an argon ion beam is formed with an energy of several eV and current up to 2.5 A. The discharge voltage is kept at less than 20 V, to keep below ion sputtering threshold for cathode material, a feature which along with filtering of the injected electron flow, results in extremely low contamination of the generated ion flow.

  12. Radioistopes to Solar to High Energy Accelerators - Chip-Scale Energy Sources

    Science.gov (United States)

    Lal, Amit

    2013-12-01

    This talk will present MEMS based power sources that utilize radioisotopes, solar energy, and potentially nuclear energy through advancements in integration of new structures and materials within MEMS. Micro power harvesters can harness power from vibration, radioisotopes, light, sound, and biology may provide pathways to minimize or even eliminate batteries in sensor nodes. In this talk work on radioisotope thin films for MEMS will be include the self-reciprocating cantilever, betavoltaic cells, and high DC voltages. The self-reciprocating cantilever energy harvester allows small commercially viable amounts of radioisotopes to generate mW to Watts of power so that very reliable power sources that last 100s of years are possible. The tradeoffs between reliability and potential stigma with radioisotopes allow one to span a useful design space with reliability as a key parameter. These power sources provide pulsed power at three different time scales using mechanical, RF, and static extraction of energy from collected charge. Multi-use capability, both harvesting radioisotope power and local vibration energy extends the reliability of micro-power sources further.

  13. Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Isidore Chukwunweike Ezema

    2016-02-01

    Full Text Available Even though domestic energy can be from either renewable or non-renewable sources, the former is preferred because of its role in reducing both the operational energy intensity and carbon footprint. Given the positive role renewable energy plays in the energy mix, this paper examined the pattern of operational energy use with particular reference to the renewable and non-renewable energy content in medium and high density public residential buildings in Lagos, Nigeria. A survey research method was adopted for primary data collection while data analysis was by descriptive statistics. The study found that renewable energy use in the residential units is very low. In contrast, there was high dependence of the occupants on non-renewable direct fuel combustion through the use of fossil fuel-driven privately-owned electricity generators for electricity supply as a result of the inadequate supply from the national grid. In addition to the relatively high operational energy intensity observed in the studied buildings, the findings have implications for the safety, health and wellbeing of the building occupants as well as for carbon emissions from the buildings and for overall environmental sustainability. Recommendations to increase renewable energy use in new buildings and as retrofits in existing buildings were made. Article History: Received Oct 18, 2015; Received in revised form January 14, 2016; Accepted January 30, 2016; Available online How to Cite This Article: Ezema, I.C., Olotuah, A.O., and Fagbenle, O.I, S. (2016 Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources. Int. Journal of Renewable Energy Development, 5(1,15-24. http://dx.doi.org/10.14710/ijred.5.1.15-24 

  14. Improvement in magnetic field immunity of externally-coupled transcutaneous energy transmission system for a totally implantable artificial heart.

    Science.gov (United States)

    Yamamoto, Takahiko; Koshiji, Kohji; Homma, Akihiko; Tatsumi, Eisuke; Taenaka, Yoshiyuki

    2008-01-01

    Transcutaneous energy transmission (TET) that uses electromagnetic induction between the external and internal coils of a transformer is the most promising method to supply driving energy to a totally implantable artificial heart without invasion. Induction-heating (IH) cookers generate magnetic flux, and if a cooker is operated near a transcutaneous transformer, the magnetic flux generated will link with the external and internal coils of the transcutaneous transformer. This will affect the performance of the TET and the artificial heart system. Hence, it is necessary to improve the magnetic field immunity of the TET system. During operation of the system, if the transcutaneous transformer is in close proximity to an IH cooker, the electric power generated by the cooker and coupled to the transformer can drive the artificial heart system. To prevent this coupling, the external coil was shielded with a conductive shield that had a slit in it. This reduces the coupling between the transformer and the magnetic field generated by the induction cooker. However, the temperature of the shield increased due to heating by eddy currents. The temperature of the shield can be reduced by separating the IH cooker and the shield.

  15. Propagation and Source Energy Spectra of Cosmic-Ray Nuclei at High Energies

    CERN Document Server

    Ave, M; Hoeppner, C; Marshall, J; Müller, D

    2008-01-01

    A recent measurement of the TRACER instrument on long-duration balloon has determined the individual energy spectra of the major primary cosmic-ray nuclei from oxygen (Z=8) to iron (Z=26). The measurements cover a large range of energies and extend to energies beyond 10^14 eV. We investigate if the data set can be described by a simple but plausible model for acceleration and propagation of cosmic rays. The model assumes a power-law energy spectrum at the source with a common spectral index alpha for all nuclear species, and an energy dependent propagation pathlength (Lambda proportional to E^-0.6) combined with an energy-independent residual pathlength Lambda_0. We find that the data can be fit with a fairly soft source spectrum alpha=2.3-2.4), and with a residual pathlength Lambda_0 as high as 0.3 g cm^-2. We discuss this model in the context of other pertinent information, and we determine the relative abundances of the elements at the cosmic-ray source.

  16. Status report on the Low Energy Neutron Source for 2015

    Science.gov (United States)

    Baxter, D. V.; Rinckel, T.

    2016-11-01

    The Low Energy Neutron Source at Indiana University first produced cold neutrons in April of 2005. Ten years after first reaching this milestone, the facility has three instruments in operation on its cold target station, and a second target station is devoted to thermal and fast neutron physics offers capabilities in radiation effects research (single-event effects in electronics) and radiography. Key elements in our success over these last ten years have been the diversity of activities we have been able maintain (which often involves using each of our instruments for multiple different activities), the close relationship we have developed with a number of major sources, and the focus we have had on innovation in neutron instrumentation. In this presentation, we will introduce some of the highlights from our most recent activities, provide an update on some of our technical challenges, and describe some of our ideas for the future.

  17. Impact of external industrial sources on the regional and local SO₂ and O₃ levels of the Mexico megacity

    Energy Technology Data Exchange (ETDEWEB)

    Almanza, V. H.; Molina, Luisa T.; Li, Guohui; Fast, Jerome D.; Sosa, G.

    2014-08-22

    The air quality of megacities can be influenced by external emissions sources on both global and regional scale, and at the same time their outflow emissions can exert an important impact to the surrounding environment. The present study evaluates an SO₂ peak observed on 24 March 2006 at the suburban supersite T1 and ambient air quality monitoring stations located in the north region of the Mexico City Metropolitan Area (MCMA) during MILAGRO campaign. We found that this peak could be related to an important episodic emission event from Tizayuca region, northeast of the MCMA. Back trajectories analyses suggest that the emission event started in the early morning at 10 04:00 LST and lasted for about 9 h. The estimated emission rate is noticeably high, about 2 kgs-¹. This finding suggests the possibility of "overlooked"emission sources in this region that could influence the air quality of the MCMA. This further motivated us to study the cement plants, including those in the State of Hidalgo and in the State of Mexico, and we found that they can contribute in the NE region of the basin (about 15 41.7%), at the suburban supersite T1 (41.23%) and at some monitoring stations their contribution can be even higher than from the Tula Industrial Complex. The contribution of Tula Industrial Complex to regional ozone levels is estimated. The model suggests low contribution to the MCMA (1 ppb to 4 ppb) and slightly higher at the suburban T1 (6 ppb) and rural T2 (5 ppb) supersites. However, the contribution could be 20 as high as 10 ppb in the upper northwest region of the basin and in the southwest and south-southeast regions of State of Hidalgo. In addition, a first estimate of the potential contribution from flaring activities to regional ozone levels is presented. Emission rates are estimated with a CFD combustion model. Results suggest that up to 30% of the total regional ozone from TIC could be related to flaring activities. 25 Finally, the influence in SO₂ levels

  18. Impact of external industrial sources on the regional and local SO2 and O3 levels of the Mexico megacity

    Science.gov (United States)

    Almanza, V. H.; Molina, L. T.; Li, G.; Fast, J.; Sosa, G.

    2014-08-01

    The air quality of megacities can be influenced by external emission sources on both global and regional scales. At the same time their outflow emissions can exert an impact to the surrounding environment. The present study evaluates an SO2 peak observed on 24 March 2006 at the suburban supersite T1 and at ambient air quality monitoring stations located in the northern region of the Mexico City Metropolitan Area (MCMA) during the Megacity Initiative: Local and Global Research Observations (MILAGRO) field campaign. We found that this peak could be related to an important episodic emission event coming from Tizayuca region, northeast of the MCMA. Back-trajectory analyses suggest that the emission event started in the early morning at 04:00 LST and lasted for about 9 h. The estimated emission rate is about 2 kg s-1. To the best of our knowledge, sulfur dioxide emissions from the Tizayuca region have not been considered in previous studies. This finding suggests the possibility of "overlooked" emission sources in this region that could influence the air quality of the MCMA. This further motivated us to study the cement plants, including those in the state of Hidalgo and in the State of Mexico. It was found that they can contribute to the SO2 levels in the northeast (NE) region of the basin (about 42%), at the suburban supersite T1 (41%) and that at some monitoring stations their contribution can be even higher than the contribution from the Tula Industrial Complex (TIC). The contribution of the Tula Industrial Complex to regional ozone levels is estimated. The model suggests low contribution to the MCMA (1 to 4 ppb) and slightly higher contribution at the suburban T1 (6 ppb) and rural T2 (5 ppb) supersites. However, the contribution could be as high as 10 ppb in the upper northwest region of the basin and in the southwest and south-southeast regions of the state of Hidalgo. In addition, the results indicated that the ozone plume could also be transported to northwest

  19. Designing and Testing Energy Harvesters Suitable for Renewable Power Sources

    Science.gov (United States)

    Synkiewicz, B.; Guzdek, P.; Piekarski, J.; Zaraska, K.

    2016-01-01

    Energy harvesters convert waste power (heat, light and vibration) directly to electric power . Fast progress in their technology, design and areas of application (e.g. “Internet of Things”) has been observed recently. Their effectiveness is steadily growing which makes their application to powering sensor networks with wireless data transfer reasonable. The main advantage is the independence from wired power sources, which is especially important for monitoring state of environmental parameters. In this paper we describe the design and realization of a gas sensor monitoring CO level (powered by TEG) and two, designed an constructed in ITE, autonomous power supply modules powered by modern photovoltaic cells.

  20. Polyolephine waste recycling as source of power energy

    Directory of Open Access Journals (Sweden)

    Tisovski Štefan

    2008-01-01

    Full Text Available Polyolephine waste (polyetilene, polypropilene is the main source of environmental pollution. Depolymerization of waste in reactor under atmospheric pressure yields hydrocarbon mixture C1-C34. In turn, combustion of C1-C7 fraction provides reactor temperature regime. The plant is automated and energetically highly efficient. Small electric power is required for operating the plant. The waste originating from depolymerazation does not pollute the environment. Fraction C7-C34 not only serves for commercial purposes but also as a power energy provider within the waste deploymerization plant.

  1. Radiant Energy Power Source for Jet Aircraft. Final performance report

    Energy Technology Data Exchange (ETDEWEB)

    Doellner, O.L.

    1992-02-01

    This report beings with a historical overview on the origin and early beginnings of Radiant Energy Power Source for Jet Aircraft. The report reviews the work done in Phase I (Grant DE-FG01-82CE-15144) and then gives a discussion of Phase II (Grant DE-FG01-86CE-15301). Included is a reasonably detailed discussion of photovoltaic cells and the research and development needed in this area. The report closes with a historical perspective and summary related to situations historically encountered on projects of this nature. 15 refs.

  2. Fiscal Policy for Renewable Energy Sources and Its Economic Impact

    OpenAIRE

    Rita Helbra Tenrini; Sidiq Suryo Nugroho

    2014-01-01

    Indonesia is the largest producers of palm oil. Along with the increasing demand for renewable energy source, palm oil will turn to be a very important commodity in the future. The palm oil industry will gain more value-added if they export the commodities in processed materials rather than raw materials. On the other hands palm oil industry more likely to export raw material, because there’s no incentives for them to export processed materials. Therefore, to give an incentive to palm oil ind...

  3. On the physics of power, energy and economics of renewable electric energy sources - Part II

    Energy Technology Data Exchange (ETDEWEB)

    Skoglund, Annika [Dep. of Industrial Economics, Royal Institute of Technology, Lindstedts vaeg 30, 100 44 Stockholm (Sweden); Leijon, Mats; Waters, Rafael [Div. of Electricity, Swedish Centre for Renewable Electric Energy Conversion, Uppsala University, Aangstroem 751 21 Uppsala (Sweden); Rehn, Alf [Dep. of Business Administration, Aabo Akademi University, Henriksgatan 7FIN-20500 Aabo (Finland); Lindahl, Marcus [Div. of Industrial Management, Uppsala University, Aangstroem 751 21 Uppsala (Sweden)

    2010-08-15

    Renewable Energy Technologies (RETs) are often recognized as less competitive than traditional electric energy conversion systems. Obstacles with renewable electric energy conversion systems are often referred to the intermittency of the energy sources and the relatively high maintenance cost. However, due to an intensified discourse on climate change and its effects, it has from a societal point of view, become more desirable to adopt and install CO{sub 2} neutral power plants. Even if this has increased the competitiveness of RETs in a political sense, the new goals for RET installations must also be met with economical viability. We propose that the direction of technical development, as well as the chosen technology in new installations, should not primarily be determined by policies, but by the basic physical properties of the energy source and the associated potential for inexpensive energy production. This potential is the basic entity that drives the payback of the investment of a specific RET power plant. With regard to this, we argue that the total electric energy conversion system must be considered if effective power production is to be achieved, with focus on the possible number of full loading hours and the Degree of Utilization. This will increase the cost efficiency and economical competitiveness of RET investments, and could enhance faster diffusion of new innovations and installations without over-optimistic subsidies. This paper elaborates on the overall problem of the economy of renewable electric energy conversion systems by studying the interface between physics, engineering and economy reported for RET power plants in different scientific publications. The core objective is to show the practical use of the Degree of Utilization and how the concept is crucial for the design and economical optimization disregarding subsidies. The results clearly indicate that the future political regulative frameworks should consider the choice of renewable

  4. Electrochemical Energy Storage and Power Sources for NASA Exploration Missions

    Science.gov (United States)

    Baldwin, Richard S.

    2007-01-01

    An overview of NASA s electrochemical energy storage programs for NASA Exploration missions is being presented at the 10th Electrochemical Power Sources R&D Symposium, which is being held in Williamsburg, VA on August 20-23, 2007. This public domain venue, which is sponsored by the U.S. Navy and held every two years, serves as a forum for the dissemination of research and development results related to electrochemical energy storage technology programs that are currently being supported and managed within governmental agencies. Technology areas of primary interest include batteries, fuel cells, and both overview and focused presentations on such are given by both governmental and contractual researchers. The forum also provides an opportunity to assess technology areas of mutual interest with respect to establishing collaborative and/or complementary programmatic interactions.

  5. Stochastic Optimal Scheduling of Residential Appliances with Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Hongyu; Pratt, Annabelle; Chakraborty, Sudipta

    2015-07-03

    This paper proposes a stochastic, multi-objective optimization model within a Model Predictive Control (MPC) framework, to determine the optimal operational schedules of residential appliances operating in the presence of renewable energy source (RES). The objective function minimizes the weighted sum of discomfort, energy cost, total and peak electricity consumption, and carbon footprint. A heuristic method is developed for combining different objective components. The proposed stochastic model utilizes Monte Carlo simulation (MCS) for representing uncertainties in electricity price, outdoor temperature, RES generation, water usage, and non-controllable loads. The proposed model is solved using a mixed integer linear programming (MILP) solver and numerical results show the validity of the model. Case studies show the benefit of using the proposed optimization model.

  6. Cogenerational sources of energies and their allocating problem

    Directory of Open Access Journals (Sweden)

    Badida Miroslav

    1997-12-01

    Full Text Available Energy production in industrial communities consume a main part of primary raw materials and it is one of the sources of ecologicall impact. Electric power plants and warm produce plants are mostly important investment – consuming establishments with a long time of return, what stress along with the economical, predictional, logistical and environmental decision making aspect of their allocating. Already input of the mentioned aspects along with the price movement after the energy depression motivate a formation of new conception of combinated so-called items, which are able to use the energetic potential of fuels with a higher concurrent efficiency and, on the other hand, can reduce ecologic impacts of fossil combustion.

  7. BIOMASS UTILIZATION AS A RENEVABLE ENERGY SOURCE IN POLISH POWER INDUSTRY – CURRENT STATUS AND PERSPECTIVES

    OpenAIRE

    Beata Gołuchowska; Jarosław Sławiński; Grzegorz Markowski

    2015-01-01

    The depletion of the conventional energy sources, as well as the degradation and pollution of the environment by the exploitation of fossil fuels caused the development of renewable energy sources (RES), including biomass. In Poland, biomass is the most popular renewable energy source, which is closely related to the obligations associated with the membership in the EU. Biomass is the oldest renewable energy source, and its potential, diversity and polymorphism place it over other sources. Be...

  8. Energy scaling of terahertz-wave parametric sources.

    Science.gov (United States)

    Tang, Guanqi; Cong, Zhenhua; Qin, Zengguang; Zhang, Xingyu; Wang, Weitao; Wu, Dong; Li, Ning; Fu, Qiang; Lu, Qingming; Zhang, Shaojun

    2015-02-23

    Terahertz-wave parametric oscillators (TPOs) have advantages of room temperature operation, wide tunable range, narrow line-width, good coherence. They have also disadvantage of small pulse energy. In this paper, several factors preventing TPOs from generating high-energy THz pulses and the corresponding solutions are analyzed. A scheme to generate high-energy THz pulses by using the combination of a TPO and a Stokes-pulse-injected terahertz-wave parametric generator (spi-TPG) is proposed and demonstrated. A TPO is used as a source to generate a seed pulse for the surface-emitted spi-TPG. The time delay between the pump and Stokes pulses is adjusted to guarantee they have good temporal overlap. The pump pulses have a large pulse energy and a large beam size. The Stokes beam is enlarged to make its size be larger than the pump beam size to have a large effective interaction volume. The experimental results show that the generated THz pulse energy from the spi-TPG is 1.8 times as large as that obtained from the TPO for the same pumping pulse energy density of 0.90 J/cm(2) and the same pumping beam size of 3.0 mm. When the pumping beam sizes are 5.0 and 7.0 mm, the enhancement times are 3.7 and 7.5, respectively. The spi-TPG here is similar to a difference frequency generator; it can also be used as a Stokes pulse amplifier.

  9. Galactic sources of high energy neutrinos: Expectation from gamma-ray data

    Directory of Open Access Journals (Sweden)

    Sahakyan N.

    2016-01-01

    Full Text Available The recent results from ground based γ-ray detectors (HESS, MAGIC, VERITAS provide a population of TeV galactic γ-ray sources which are potential sources of High Energy (HE neutrinos. Since the γ-rays and ν-s are produced from decays of neutral and charged pions, the flux of TeV γ-rays can be used to estimate the upper limit of ν flux and vice versa; the detectability of ν flux implies a minimum flux of the accompanying γ-rays (assuming the internal and the external absorption of γ-rays is negligible. Using this minimum flux, it is possible to find the sources which can be detected with cubic-kilometer telescopes. I will discuss the possibility to detect HE neutrinos from powerful galactic accelerators, such as Supernova Remnants (SNRs and Pulsar Wind Nebulae (PWNe and show that likely only RX J1713.7-3946, RX J0852.0-4622 and Vela X can be detected by current generation of instruments (IceCube and Km3Net. It will be shown also, that galactic binary systems could be promising sources of HE ν-s. In particular, ν-s and γ-rays from Cygnus X-3 will be discussed during recent gamma-ray activity, showing that in the future such kind of activities could produce detectable flux of HE ν-s.

  10. Galactic sources of high energy neutrinos: Expectation from gamma-ray data

    Science.gov (United States)

    Sahakyan, N.

    2016-07-01

    The recent results from ground based γ-ray detectors (HESS, MAGIC, VERITAS) provide a population of TeV galactic γ-ray sources which are potential sources of High Energy (HE) neutrinos. Since the γ-rays and ν-s are produced from decays of neutral and charged pions, the flux of TeV γ-rays can be used to estimate the upper limit of ν flux and vice versa; the detectability of ν flux implies a minimum flux of the accompanying γ-rays (assuming the internal and the external absorption of γ-rays is negligible). Using this minimum flux, it is possible to find the sources which can be detected with cubic-kilometer telescopes. I will discuss the possibility to detect HE neutrinos from powerful galactic accelerators, such as Supernova Remnants (SNRs) and Pulsar Wind Nebulae (PWNe) and show that likely only RX J1713.7-3946, RX J0852.0-4622 and Vela X can be detected by current generation of instruments (IceCube and Km3Net). It will be shown also, that galactic binary systems could be promising sources of HE ν-s. In particular, ν-s and γ-rays from Cygnus X-3 will be discussed during recent gamma-ray activity, showing that in the future such kind of activities could produce detectable flux of HE ν-s.

  11. The Optimal Use of Renewable Energy Sources-The Case of Lemnos Island

    DEFF Research Database (Denmark)

    Koroneos, C.; Xydis, George; Polyzakis, A.

    2012-01-01

    energy needs from Renewable Energy Sources taking into consideration a multiplicity of criteria such as environmental impacts, energy demand, energy cost, and resources availability. A series of solutions have resulted, based on deterministic model runs, providing decision makers the flexibility...

  12. Renewable energy sources at decisive turning; Le energie rinnovabili a una svolta decisiva

    Energy Technology Data Exchange (ETDEWEB)

    Riboldi, S.

    2000-11-01

    The renewable energy sources will be very important for planetary environmental emergency and for technological evolution. [Italian] Marginali da molti anni, le rinnovabili diverranno di primaria importanza grazie all'emergenza ambientale planetaria e all'evoluzione tecnologica. Siamo giunti finalmente a una vera svolta epocale?.

  13. Representation of variable renewable energy sources in TIMER, an aggregated energy system simulation model

    NARCIS (Netherlands)

    de Boer, Harmen Sytze (H S.).; van Vuuren, Detlef (D P.).|info:eu-repo/dai/nl/11522016X

    2017-01-01

    The power system is expected to play an important role in climate change mitigation. Variable renewable energy (VRE) sources, such as wind and solar power, are currently showing rapid growth rates in power systems worldwide, and could also be important in future mitigation strategies. It is

  14. Approximate energy states and thermal properties of a particle with position-dependent mass in external magnetic fields

    CERN Document Server

    Eshghi, Mahdi; Ikhdair, Sameer M

    2016-01-01

    We solve the Schr\\"odinger equation with a position-dependent mass (PDM) charged particle interacted via the superposition of the Morse and Coulomb potentials and exposed to external magnetic and Aharonov-Bohm (AB) flux fields. The non-relativistic bound state energies together with their wave functions are calculated for two spatially-dependent mass distribution functions. We also study the thermal quantities of such a system. Further, the canonical formalism is used to compute various thermodynamic variables for second choosing mass by using the Gibbs formalism. We give plots for energy as a function of various physical parameters. The behavior of the internal energy, specific heat and entropy as functions of temperature and mass density parameter in the inverse-square mass case for different values of magnetic field are shown.

  15. Electron energy boosting in laser-wake-field acceleration with external magnetic field B˜1 T and laser prepulses

    Science.gov (United States)

    Hosokai, Tomonao; Zhidkov, Alexei; Yamazaki, Atsushi; Mizuta, Yoshio; Uesaka, Mitsuru; Kodama, Ryosuke

    2010-03-01

    Hundred-mega-electron-volt electron beams with quasi-monoenergetic distribution, and a transverse geometrical emittance as small as ˜0.02 π mm mrad are generated by low power (7 TW, 45 fs) laser pulses tightly focused in helium gas jets in an external static magnetic field, B˜1 T. Generation of monoenergetic beams strongly correlates with appearance of a straight, at least 2 mm length plasma channel in a short time before the main laser pulse and with the energy of copropagating picosecond pedestal pulses (PPP). For a moderate energy PPP, the multiple or staged electron self-injection in the channel gives several narrow peaks in the electron energy distribution.

  16. Determination of Optimum Thermal Insulation Thicknesses for External Walls Considering the Heating, Cooling and Annual Energy Requirement

    Directory of Open Access Journals (Sweden)

    Ömer KAYNAKLI

    2016-06-01

    Full Text Available In this study, optimization of thermal insulation thickness applied to the external walls of buildings has been carried out comparatively based on the seasonal (space-heating and cooling and the annual energy requirements considering solar radiation effect. This study has been performed for four degree-day regions of Turkey, namely, Iskenderun (in the first region, Istanbul (in the second region, Ankara (in the third region and Ardahan (in the fourth region. By determining the sol-air temperatures for each region and maximizing the present worth value of seasonal and annual energy savings, the optimum thermal insulation thicknesses have been calculated. The effects of solar radiation on heating-cooling energy requirements, the variation of optimum insulation thicknesses and payback periods with respect to degree-day regions, the differences between the analyses based on seasonal and annual have been presented in tabular and graphical form.

  17. External perforated window Solar Screens: The effect of screen depth and perforation ratio on energy performance in extreme desert environments

    KAUST Repository

    Sherif, A.

    2012-09-01

    In hot arid desert environments, the solar radiation passing through windows increases the cooling loads and the energy consumption of buildings. Shading of windows can reduce these loads. Unlike the woven solar screens, wooden solar screens have a thickness that provides selective shading properties. Perforated wooden solar screens were traditionally used for windows shading. Developing modern types of these shading systems can lead to significant energy savings. The paper addresses the influence of changing the perforation percentage and depth of these screens on the annual energy loads, hence defining the optimum depth/perforation configurations for various window orientations. Series of experiments were performed using the EnergyPlus simulation software for a typical residential building in the Kharga Oasis, located in the Egyptian desert. A range of perforation percentages and depths were tested. Conclusions prove that external fixed deep perforated solar screens could effectively achieve energy savings up to 30% of the total energy consumption in the West and South orientations. Optimum range of depths and perforation percentages were recommended. These are: 80-90% perforation rate and 1:1 depth/opening width ratio. These lighter and deeper solar screen configurations were found to be more efficient in energy consumption in comparison with the traditional ones. © 2012 Elsevier B.V. All rights reserved.

  18. Renewable energy sources: resistance to change; Energies renouvelables: les resistances au changement

    Energy Technology Data Exchange (ETDEWEB)

    Dubreuil, Th.; Audrain-Demey, G.; Attal, J.Ph.; Lormeteau, B. [Nantes Univ., Droit de l' Environnement et du Developpement Durable, 44 (France)

    2011-10-15

    This paper is the summary of a conference day organised by the students of the 'environment and sustainable development law' Master of Nantes university (France). This interdisciplinary meeting brought together professionals of renewable energy industries who could testify about the resistance of both politicians and the public opinion against the energy transition towards renewable sources. Legal, political, sociological and cultural considerations are put forward to explain this resistance. The French specificity, with an over-representation of nuclear energy, a constraining legal framework for renewable energies, a regional opposition to renewable energy projects (NIMBY syndrome), and a lack of trust in the political class and in its representatives are as many factors that have contributed to build this French 'cultural exception'. (J.S.)

  19. Experimental investigation of jojoba as a renewable energy source

    Energy Technology Data Exchange (ETDEWEB)

    Al-Widyan, Mohamad I. [Mechanical Engineering Department, Jordan University of Science and Technology, PO Box 3030, Irbid 22110 (Jordan); Al-Muhtaseb, Mu' taz A. [Mechanical Engineering Department, Faculty of Engineering, University of Jordan, PO Box 961060, Amman 11196 (Jordan)

    2010-08-15

    This work examined jojoba (oil and cake) as possible alternative fuel sources. Jojoba is a shrub that grows very well in deserts and its cake is the solid part produced upon processing of the jojoba seeds for oil extraction. In this study, pure jojoba oil and 50/50 blends with diesel fuel were tested as fuels in a single cylinder diesel engine. The diesel fuel was the baseline of comparison throughout the runs. The cake was tested for both direct combustion (pellets) and as a substrate for biogas production. The pellets were formed by compacting the cake in cylindrical dies using a hydraulic press while the biogasification was conducted in an anaerobic digester model Bioflo 110 from Brunswick. The findings indicate that the optimum injection pressure for jojoba oil in the engine is 210 bars at which engine speed was maximum (2700 rpm), NO{sub x} and CO emissions as well as exhaust temperature were minimum. Using jojoba cake for biogasification resulted in a yield of about 600 ml biogas per 400 g of jojoba cake. Burning jojoba compacted cake (pellets) for direct combustion in a stove indicated that jojoba cake sustained a temperature in excess of 300 C for a reasonable amount of time and that the cake was very competitive to wood and has energy content more than most types of wood. Overall, it may be stated that both jojoba oil and cake hold real promise as alternative energy sources. (author)

  20. The Use of Energy in Malaysia: Tracing Energy Flows from Primary Source to End Use

    Directory of Open Access Journals (Sweden)

    Chinhao Chong

    2015-04-01

    Full Text Available Malaysia is a rapidly developing country in Southeast Asia that aims to achieve high-income country status by 2020; its economic growth is highly dependent on its abundant energy resources, especially natural gas and crude oil. In this paper, a complete picture of Malaysia’s energy use from primary source to end use is presented by mapping a Sankey diagram of Malaysia’s energy flows, together with ongoing trends analysis of the main factors influencing the energy flows. The results indicate that Malaysia’s energy use depends heavily on fossil fuels, including oil, gas and coal. In the past 30 years, Malaysia has successfully diversified its energy structure by introducing more natural gas and coal into its power generation. To sustainably feed the rapidly growing energy demand in end-use sectors with the challenge of global climate change, Malaysia must pay more attention to the development of renewable energy, green technology and energy conservation in the future.

  1. Characterization of a Low-Cost Optical Flow Sensor When Using an External Laser as a Direct Illumination Source

    Directory of Open Access Journals (Sweden)

    Jordi Palacín

    2011-12-01

    Full Text Available In this paper, a low cost optical flow sensor is combined with an external laser device to measure surface displacements and mechanical oscillations. The measurement system is based on applying coherent light to a diffuser surface and using an optical flow sensor to analyze the reflected and transferred light to estimate the displacement of the surface or the laser spot. This work is focused on the characterization of this measurement system, which can have the optical flow sensor placed at different angles and distances from the diffuser surface. The results have shown that the displacement of the diffuser surface is badly estimated when the optical mouse sensor is placed in front of the diffuser surface (angular orientation >150° while the highest sensitivity is obtained when the sensor is located behind the diffuser surface and on the axis of the laser source (angular orientation 0°. In this case, the coefficient of determination of the measured displacement, R2, was very high (>0.99 with a relative error of less than 1.29%. Increasing the distance between the surface and the sensor also increased the sensitivity which increases linearly, R2 = 0.99. Finally, this measurement setup was proposed to measure very low frequency mechanical oscillations applied to the laser device, up to 0.01 Hz in this work. The results have shown that increasing the distance between the surface and the optical flow sensor also increases the sensitivity and the measurement range.

  2. 75 FR 16957 - Energy Conservation Program: Test Procedures for Battery Chargers and External Power Supplies

    Science.gov (United States)

    2010-04-02

    ... Economy. For referencing purposes, throughout this notice, comments submitted from these groups will be..., San Diego Gas and Electric Company, American Council for an Energy-Efficient Economy, Appliance... collaborative process between energy efficiency advocates and industry experts, including multiple meetings and...

  3. Deep coal seams as a greener energy source: a review

    Science.gov (United States)

    Ranathunga, A. S.; Perera, M. S. A.; Ranjith, P. G.

    2014-12-01

    Today, coal and oil are the main energy sources used in the world. However, these sources will last for only a few decades. Hence, the investigation of possible energy sources to meet this crisis has become a crucial task. Coal bed methane (CBM) is a potential energy source which can be used to fulfil the energy demand. Since the amount of carbon dioxide (CO2) emitted to the atmosphere from the use of CBM is comparatively very low compared to conventional energy sources, it is also a potential mitigation option for global warming. This paper reviews CBM recovery techniques with particular emphasis on CO2-enhanced coal bed methane (CO2-ECBM) recovery. The paper reviews (1) conventional CBM recovery techniques and problems associated with them, (2) CBM production-enhancement methods, including hydro-fracturing and enhanced CBM recovery techniques, such as N2-ECBM and CO2-ECBM, (3) the importance of the CO2-ECBM technique compared to other methods and problems with it, (4) the effect of CO2 injection during the CO2-ECBM process on coal seam permeability and strength and (5) current CO2-ECBM field projects and their progress. Although conventional CBM recovery methods are simple (basically related to the drawdown of the reservoir pressure to release methane from it), they are inefficient for the recovery of a commercially viable amount of methane from coal seams. Therefore, to enhance methane production, several methods are used, such as hydro-fracturing and ECBM (N2-ECBM and CO2-ECBM). The CO2-ECBM process has a number of advantages compared to other methane recovery techniques, as it contributes to the mitigation of the atmospheric CO2 level, is safer and more economical. However, as a result of CO2 injection into the coal seam during the CO2-ECBM process, coal mass permeability and strength may be crucially changed, due to the coal matrix swelling associated with CO2 adsorption into the coal matrix. Both injecting CO2 properties (gas type, CO2 phase and pressure

  4. Accounting Methodology for Source Energy of Non-Combustible Renewable Electricity Generation

    Energy Technology Data Exchange (ETDEWEB)

    Donohoo-Vallett, Paul [US Department of Energy, Washington, DC (United States)

    2016-10-01

    As non-combustible sources of renewable power (wind, solar, hydro, and geothermal) do not consume fuel, the “source” (or “primary”) energy from these sources cannot be accounted for in the same manner as it is for fossil fuel sources. The methodology chosen for these technologies is important as it affects the perception of the relative size of renewable source energy to fossil energy, affects estimates of source-based building energy use, and overall source energy based metrics such as energy productivity. This memo reviews the methodological choices, outlines implications of each choice, summarizes responses to a request for information on this topic, and presents guiding principles for the U.S. Department of Energy, (DOE) Office of Energy Efficiency and Renewable Energy (EERE) to use to determine where modifying the current renewable source energy accounting method used in EERE products and analyses would be appropriate to address the issues raised above.

  5. Development of a low energy ion source with multicapillary anode

    Science.gov (United States)

    Ogawa, Soichi; Okamoto, Akio; Takiguchi, Katsumi; Yoshitake, Masaaki; Nosaka, Toshikazu; Fukui, Shigeo; Ueno, Tsutomu

    1989-02-01

    A new type of hot cathode ion source which has a multicapillary anode and a discharge stabilizer electrode has been developed. There are two special features in this ion source. The gaseous flow is intense and of the collimated beam type, because it is introduced through the multicapillary anode. A high ion current density ( > 5 mA/cm 2) can be obtained because discharge in high vacuum can continue with the help of the stabilizer electrode. At a stabilizer voltage ( Vs) of 50 V, ion current densities of 2.2 and 6.1 mA/cm 2 were obtained at acceleration voltages ( Vacc) of 20 and 200 V, respectively. The ion energy was dependent on Vd, and the full width at half maximum (FWHM) of its distribution was less than 15 eV. Cu films were etched by this ion source. The etching rate ( Er) was 150 Å/min at Vacc = 100 V. The relationship between the etching rate and Vacc was represented by Er ∝ ( Vacc) α. The values of α were 2.0 in the region of Vacc ≤ 100 V and 1.0 for Vacc ≥ 100 V.

  6. Biologically Produced Methane as a Renewable Energy Source.

    Science.gov (United States)

    Holmes, D E; Smith, J A

    2016-01-01

    Methanogens are a unique group of strictly anaerobic archaea that are more metabolically diverse than previously thought. Traditionally, it was thought that methanogens could only generate methane by coupling the oxidation of products formed by fermentative bacteria with the reduction of CO2. However, it has recently been observed that many methanogens can also use electrons extruded from metal-respiring bacteria, biocathodes, or insoluble electron shuttles as energy sources. Methanogens are found in both human-made and natural environments and are responsible for the production of ∼71% of the global atmospheric methane. Their habitats range from the human digestive tract to hydrothermal vents. Although biologically produced methane can negatively impact the environment if released into the atmosphere, when captured, it can serve as a potent fuel source. The anaerobic digestion of wastes such as animal manure, human sewage, or food waste produces biogas which is composed of ∼60% methane. Methane from biogas can be cleaned to yield purified methane (biomethane) that can be readily incorporated into natural gas pipelines making it a promising renewable energy source. Conventional anaerobic digestion is limited by long retention times, low organics removal efficiencies, and low biogas production rates. Therefore, many studies are being conducted to improve the anaerobic digestion process. Researchers have found that addition of conductive materials and/or electrically active cathodes to anaerobic digesters can stimulate the digestion process and increase methane content of biogas. It is hoped that optimization of anaerobic digesters will make biogas more readily accessible to the average person. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. BPS, energy efficiency and renewable energy sources for buildings greening and zero energy cities planning harmony and ethics of sustainability

    Energy Technology Data Exchange (ETDEWEB)

    Todorovic, Marija S. [University of Belgrade, Serbia and Southeast University (China)

    2011-07-01

    Traditional village houses now use renewable materials and energy sources and this paper presents the intrinsic harmony of these buildings' greening and their sustainability. The paper covers building technical systems, sustainable energy supply, and the importance of renewable raw materials (RMS) for sustainable development. This study investigated the role of building dynamic behavior and optimized energy efficiency in reducing thermal loads significantly. A preliminary design for sustainable energy efficient settlements with net zero energy buildings is proposed and a comprehensive multidisciplinary engineering study was done which identified the technical feasibility of sustainable village energy and water supplies using solar or wind technologies. Overall, through analysis of sustainability definitions and possible ways to achieve sustainability, the study demonstrated that this can only be brought about by interdisciplinary interaction and finding the right balance between materiality and spirituality, science and art, and between technological development and concern for cultural and other human values.

  8. Low energy ion beam dynamics of NANOGAN ECR ion source

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Sarvesh, E-mail: sarvesh@iuac.res.in; Mandal, A.

    2016-04-01

    A new low energy ion beam facility (LEIBF) has been developed for providing the mass analyzed highly charged intense ion beams of energy ranging from a few tens of keV to a few MeV for atomic, molecular and materials sciences research. The new facility consists of an all permanent magnet 10 GHz electron cyclotron resonance (ECR) ion source (NANOGAN) installed on a high voltage platform (400 kV) which provides large currents of multiply charged ion beams. Higher emittance at low energy of intense ion beam puts a tremendous challenge to the beam optical design of this facility. The beam line consists of mainly the electrostatic quadrupoles, an accelerating section, analyzing cum switching magnet and suitable beam diagnostics including vacuum components. The accelerated ion beam is analyzed for a particular mass to charge (m/q) ratio as well as guided to three different lines along 75°, 90° and 105° using a large acceptance analyzing cum switching magnet. The details of transverse beam optics to all the beam lines with TRANSPORT and GICOSY beam optics codes are being described. Field computation code, OPERA 3D has been utilized to design the magnets and electrostatic quadrupoles. A theoretical estimation of emittance for optimized geometry of ion source is given so as to form the basis of beam optics calculations. The method of quadrupole scan of the beam is used to characterize the emittance of the final beam on the target. The measured beam emittance increases with m/q ratios of various ion beams similar to the trend observed theoretically.

  9. Trimode Power Converter optimizes PV, diesel and battery energy sources

    Science.gov (United States)

    Osullivan, George; Bonn, Russell; Bower, Ward

    1994-12-01

    Conservatively, there are 100,000 localities in the world waiting for the benefits that electricity can provide, and many of these are in climates where sunshine is plentiful. With these locations in mind a prototype 30 kW hybrid system has been assembled at Sandia to prove the reliability and economics of photovoltaic, diesel and battery energy sources managed by an autonomous power converter. In the Trimode Power Converter the same power parts, four IGBT's with an isolation transformer and filter components, serve as rectifier and charger to charge the battery from the diesel; as a stand-alone inverter to convert PV and battery energy to AC; and, as a parallel inverter with the diesel-generator to accommodate loads larger than the rating of the diesel. Whenever the diesel is supplying the load, an algorithm assures that the diesel is running at maximum efficiency by regulating the battery charger operating point. Given the profile of anticipated solar energy, the cost of transporting diesel fuel to a remote location and a five year projection of load demand, a method to size the PV array, battery and diesel for least cost is developed.

  10. Model of complex integrated use of alternative energy sources for highly urbanized areas

    Directory of Open Access Journals (Sweden)

    Ivanova Elena Ivanovna

    2014-04-01

    Full Text Available The increase of population and continuous development of highly urbanized territories poses new challenges to experts in the field of energy saving technologies. Only a multifunctional and autonomous system of building engineering equipment formed by the principles of energy efficiency and cost-effectiveness meets the needs of modern urban environment. Alternative energy sources, exploiting the principle of converting thermal energy into electrical power, show lack of efficiency, so it appears to be necessary for reaching a visible progress to skip this middle step. A fuel cell, converting chemical energy straight into electricity, and offering a vast diversity of both fuel types and oxidizing agents, gives a strong base for designing a complex integrated system. Regarding the results of analysis and comparison conducted among the most types of fuel cells proposed by contemporary scholars, a solid oxide fuel cell (SOFC is approved to be able to ensure the smooth operation of such a system. While the advantages of this device meet the requirements of engineering equipment for modern civil and, especially, dwelling architecture, its drawbacks do not contradict with the operating regime of the proposed system. The article introduces a model of a multifunctional system based on solid oxide fuel cell (SOFC and not only covering the energy demand of a particular building, but also providing the opportunity for proper and economical operation of several additional sub-systems. Air heating and water cooling equipment, ventilating and conditioning devices, the circle of water supply and preparation of water discharge for external use (e.g. agricultural needs included into a closed circuit of the integrated system allow evaluating it as a promising model of further implementation of energy saving technologies into architectural and building practice. This, consequently, will positively affect both ecological and economic development of urban environment.

  11. Grass-cellulose as energy source for biological sulphate removal from acid mine effluents

    CSIR Research Space (South Africa)

    Greben, HA

    2008-11-01

    Full Text Available The biological sulphate removal technology requires carbon and energy sources to reduce sulphate to sulphide. Plant biomass, e.g. grass, is a sustainable source of energy when cellulose is utilised during anaerobic degradation, producing volatile...

  12. Improved design of proton source and low energy beam transport line for European Spallation Source

    Energy Technology Data Exchange (ETDEWEB)

    Neri, L., E-mail: neri@lns.infn.it; Celona, L.; Gammino, S.; Mascali, D.; Castro, G.; Ciavola, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Torrisi, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Dipartimento di Ingegneria dell’Informazione, delle Infrastrutture e dell’Energia Sostenibile, Università Mediterranea di Reggio Calabria, Via Graziella, 89122 Reggio Calabria (Italy); Cheymol, B.; Ponton, A. [European Spallation Source ESS AB, Lund (Sweden); Galatà, A. [Laboratori Nazionali di Legnaro, Istituto Nazionale di Fisica Nucleare, Viale dell' università 2, 35020 Legnaro (Italy); Patti, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Laboratori Nazionali di Legnaro, Istituto Nazionale di Fisica Nucleare, Viale dell' università 2, 35020 Legnaro (Italy); Gozzo, A.; Lega, L. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Dipartimento di Ingegneria Informatica e delle Telecomunicazioni, Università degli Studi di Catania, Viale Andrea Doria 6, 95123 Catania (Italy)

    2014-02-15

    The design update of the European Spallation Source (ESS) accelerator is almost complete and the construction of the prototype of the microwave discharge ion source able to provide a proton beam current larger than 70 mA to the 3.6 MeV Radio Frequency Quadrupole (RFQ) started. The source named PS-ESS (Proton Source for ESS) was designed with a flexible magnetic system and an extraction system able to merge conservative solutions with significant advances. The ESS injector has taken advantage of recent theoretical updates and new plasma diagnostics tools developed at INFN-LNS (Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare). The design strategy considers the PS-ESS and the low energy beam transport line as a whole, where the proton beam behaves like an almost neutralized non-thermalized plasma. Innovative solutions have been used as hereinafter described. Thermo-mechanical optimization has been performed to withstand the chopped beam and the misaligned focused beam over the RFQ input collimator; the results are reported here.

  13. Improved design of proton source and low energy beam transport line for European Spallation Source

    Science.gov (United States)

    Neri, L.; Celona, L.; Gammino, S.; Mascali, D.; Castro, G.; Torrisi, G.; Cheymol, B.; Ponton, A.; Galatà, A.; Patti, G.; Gozzo, A.; Lega, L.; Ciavola, G.

    2014-02-01

    The design update of the European Spallation Source (ESS) accelerator is almost complete and the construction of the prototype of the microwave discharge ion source able to provide a proton beam current larger than 70 mA to the 3.6 MeV Radio Frequency Quadrupole (RFQ) started. The source named PS-ESS (Proton Source for ESS) was designed with a flexible magnetic system and an extraction system able to merge conservative solutions with significant advances. The ESS injector has taken advantage of recent theoretical updates and new plasma diagnostics tools developed at INFN-LNS (Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare). The design strategy considers the PS-ESS and the low energy beam transport line as a whole, where the proton beam behaves like an almost neutralized non-thermalized plasma. Innovative solutions have been used as hereinafter described. Thermo-mechanical optimization has been performed to withstand the chopped beam and the misaligned focused beam over the RFQ input collimator; the results are reported here.

  14. Detecting Tsunami Source Energy and Scales from GNSS & Laboratory Experiments

    Science.gov (United States)

    Song, Y. T.; Yim, S. C.; Mohtat, A.

    2016-12-01

    Historically, tsunami warnings based on the earthquake magnitude have not been very accurate. According to the 2006 U.S. Government Accountability Office report, an unacceptable 75% false alarm rate has prevailed in the Pacific Ocean (GAO-06-519). One of the main reasons for those inaccurate warnings is that an earthquake's magnitude is not the scale or power of the resulting tsunami. For the last 10 years, we have been developing both theories and algorithms to detect tsunami source energy and scales, instead of earthquake magnitudes per se, directly from real-time Global Navigation Satellite System (GNSS) stations along coastlines for early warnings [Song 2007; Song et al., 2008; Song et al., 2012; Xu and Song 2013; Titov et al, 2016]. Here we will report recent progress on two fronts: 1) Examples of using GNSS in detecting the tsunami energy scales for the 2004 Sumatra M9.1 earthquake, the 2005 Nias M8.7 earthquake, the 2010 M8.8 Chilean earthquake, the 2011 M9.0 Tohoku-Oki earthquake, and the 2015 M8.3 Illapel earthquake. 2) New results from recent state-of-the-art wave-maker experiments and comparisons with GNSS data will also be presented. Related reference: Titov, V., Y. T. Song, L. Tang, E. N. Bernard, Y. Bar-Sever, and Y. Wei (2016), Consistent estimates of tsunami energy show promise for improved early warning, Pur Appl. Geophs., DOI: 10.1007/s00024-016-1312-1. Xu, Z. and Y. T. Song (2013), Combining the all-source Green's functions and the GPS-derived source for fast tsunami prediction - illustrated by the March 2011 Japan tsunami, J. Atmos. Oceanic Tech., jtechD1200201. Song, Y. T., I. Fukumori, C. K. Shum, and Y. Yi (2012), Merging tsunamis of the 2011 Tohoku-Oki earthquake detected over the open ocean, Geophys. Res. Lett., doi:10.1029/2011GL050767. Song, Y. T., L.-L. Fu, V. Zlotnicki, C. Ji, V. Hjorleifsdottir, C.K. Shum, and Y. Yi, 2008: The role of horizontal impulses of the faulting continental slope in generating the 26 December 2004 Tsunami (2007

  15. High Energy Density Science at the Linac Coherent Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Lee, R W

    2007-10-19

    High energy density science (HEDS), as a discipline that has developed in the United States from National Nuclear Security Agency (NNSA)-sponsored laboratory research programs, is, and will remain, a major component of the NNSA science and technology strategy. Its scientific borders are not restricted to NNSA. 'Frontiers in High Energy Density Physics: The X-Games of Contemporary Science' identified numerous exciting scientific opportunities in this field, while pointing to the need for a overarching interagency plan for its evolution. Meanwhile, construction of the first x-ray free-electron laser, the Office-of-Science-funded Linear Coherent Light Source-LCLS: the world's first free electron x-ray laser, with 100-fsec time resolution, tunable x-ray energies, a high rep rate, and a 10 order-of-magnitude increase in brightness over any other x-ray source--led to the realization that the scientific needs of NNSA and the broader scientific community could be well served by an LCLS HEDS endstation employing both short-pulse and high-energy optical lasers. Development of this concept has been well received in the community. NNSA requested a workshop on the applicability of LCLS to its needs. 'High Energy Density Science at the LCLS: NNSA Defense Programs Mission Need' was held in December 2006. The workshop provided strong support for the relevance of the endstation to NNSA strategic requirements. The range of science that was addressed covered a wide swath of the vast HEDS phase space. The unique possibilities provided by the LCLS in areas of intense interest to NNSA Defense Programs were discussed. The areas of focus included warm dense matter and equations of state, hot dense matter, and behavior of high-pressure materials under conditions of high strain-rate and extreme dynamic loading. Development of new and advanced diagnostic techniques was also addressed. This report lays out the relevant science, as brief summaries (Ch. II), expanded

  16. Investigation the Annual Inflation Rate of Each Energy Source on Optimal Sizing of Distributed Energy Resources

    Directory of Open Access Journals (Sweden)

    Bahram Fathi

    2011-08-01

    Full Text Available This study presents an investigation of Inflation Rate of each Energy Source on the optimized design of Hybrid Power System (HPS in a distribution system including sources like, photovoltaic array, fuel cell and battery bank.In this research, an algorithm has been developed for evaluation and cost optimization HPS. The costs include capital cost, replacement cost, operation and maintenance cost, fuel cost and production cost for HPS and DG power during different load profile. Then an objective function with aim to minimizing of total costs has been considered. A genetic algorithm approach is employed to obtain the best cost value of HPS construction.

  17. Thorium as an energy source. Opportunities for Norway

    Energy Technology Data Exchange (ETDEWEB)

    2008-01-15

    Final Recommendations of the Thorium Report Committee: 1) No technology should be idolized or demonized. All carbon-dioxide (Co2) emission-free energy production technologies should be considered. The potential contribution of nuclear energy to a sustainable energy future should be recognized. 2) An investigation into the resources in the Fen Complex and other sites in Norway should be performed. It is essential to assess whether thorium in Norwegian rocks can be defined as an economical asset for the benefit of future generations. Furthermore, the application of new technologies for the extraction of thorium from the available mineral sources should be studied. 3) Testing of thorium fuel in the Halden Reactor should be encouraged, taking benefit of the well recognized nuclear fuel competence in Halden. 4) Norway should strengthen its participation in international collaborations by joining the EURATOM fission program and the GIF program on Generation IV reactors suitable for the use of thorium. 5) The development of an Accelerator Driven System (ADS) using thorium is not within the capability of Norway working alone. Joining the European effort in this field should be considered. Norwegian research groups should be encouraged to participate in relevant international projects, although these are currently focused on waste management. 6) Norway should bring its competence in waste management up to an international standard and collaboration with Sweden and Finland could be beneficial. 7) Norway should bring its competence with respect to dose assessment related to the thorium cycle up to an international standard. 8) Since the proliferation resistance of uranium-233 depends on the reactor and reprocessing technologies, this aspect will be of key concern should any thorium reactor be built in Norway. 9) Any new nuclear activities in Norway, e.g. thorium fuel cycles, would need strong international pooling of human resources, and in the case of thorium, a strong long

  18. Active Power Deficit Estimation in Presence of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Hoseinzadeh, Bakhtyar; Silva, Filipe Miguel Faria da; Bak, Claus Leth

    2015-01-01

    following outage of SMs during cascading events. Therefore, the active power deficit following the disturbance/s may not be properly estimated by existing conventional System Frequency Response (SFR) methods in which the total inertia of the power system is required to be known. In this paper, the actual......The inertia of the power system is reduced in the presence of Renewable Energy Sources (RESs) due to their low or even no contribution in the inertial response as it is inherently available in the Synchronous Machines (SMs). The total inertia of the grid becomes unknown or at least uncertain...... active power deficit is estimated independent of grid inertia, type and number of occurred cascading events after each Load Shedding (LS) stage using shed load amount, pre-shed and post-shed Rate of Change of Frequency (ROCOF). Numerical simulations conducted on IEEE 39 bus standard test system in Dig...

  19. Current Source Converter Based Wind Energy Conversion Systems

    Institute of Scientific and Technical Information of China (English)

    Samir Kouro; Jing-ya DAI; Bin WU

    2011-01-01

    The increase in the installed capacity of wind energy conversion systems (WECS) has triggered the development of more demanding grid codes and additional requirements on performance.In order to meet these requirements the industry trend has shifted to full-scale power converter interfaces in modern multi-megawatt WECS.As consequence,a wide variety of new power converter topologies and WECS configurations have been introduced in recent years.Among them,current source converter(CSC) based configurations have attracted attention due to a series of advantages like:simple structure,grid friendly waveforms,controllable power factor,and reliable grid short-circuit protection.This paper presents the latest developments in CSC interfaces for WECS and related technologies such as modulation methods,control schemes and grid code compatibility.

  20. High-energy gamma-ray sources of cosmological origin

    Science.gov (United States)

    Brun, Pierre; Cohen-Tanugi, Johann

    2016-06-01

    The current generation of instruments in gamma-ray astrophysics launched a new era in the search for a dark matter signal in the high-energy sky. Such searches are said indirect, in the sense that the presence of a dark matter particle is inferred from the detection of products of its pair-annihilation or decay. They have recently started to probe the natural domain of existence for weakly interacting massive particles (WIMPs), the favorite dark matter candidates today. In this article, we review the basic framework for indirect searches and we present a status of current limits obtained with gamma-ray observations. We also devote a section to another possible class of cosmological gamma-ray sources, primordial black holes, also considered as a potential constituent of dark matter. xml:lang="fr"

  1. Rapid decolorization and mineralization of simulated textile wastewater in a heterogeneous Fenton like system with/without external energy.

    Science.gov (United States)

    Zhou, Tao; Lu, Xiaohua; Wang, Jia; Wong, Fook-Sin; Li, Yaozhong

    2009-06-15

    A novel Fenton like system, employing Zero Valent Iron (ZVI) and air bubbling, was developed to treat a simulated textile wastewater containing azo dye Reactive Black 5 (RB5) and Ethylenediaminetetraacetic acid (EDTA). By dioxygen activation, H(2)O(2) was self-produced continuously in the system through a series of iron-EDTA ligands reactions. After 3h reaction, the removal rates of RB5, EDTA, Total Organic Carbon (TOC), and Chemical Oxygen Demand (COD) were 100%, 96.5%, 68.6% and 92.2%, respectively. The effects of pH, atmosphere as well as the initial concentration of RB5, EDTA and ZVI were also investigated. Two types of external energy-Ultrasound (US) and Ultraviolet (UV) were introduced into the Fenton like system, respectively. The effect of these external energies on the degradation of the wastewater was assessed. It was demonstrated that US presented significant synergistic effect on the degradation and mineralization of both RB5 and EDTA, while UV could not achieve any improvement.

  2. Hybrid Design of Electric Power Generation Systems Including Renewable Sources of Energy

    Science.gov (United States)

    Wang, Lingfeng; Singh, Chanan

    2008-01-01

    With the stricter environmental regulations and diminishing fossil-fuel reserves, there is now higher emphasis on exploiting various renewable sources of energy. These alternative sources of energy are usually environmentally friendly and emit no pollutants. However, the capital investments for those renewable sources of energy are normally high,…

  3. 48 CFR 217.175 - Multiyear contracts for electricity from renewable energy sources.

    Science.gov (United States)

    2010-10-01

    ... electricity from renewable energy sources. 217.175 Section 217.175 Federal Acquisition Regulations System... renewable energy sources. (a) The head of the contracting activity may enter into a contract for a period not to exceed 10 years for the purchase of electricity from sources of renewable energy, as that...

  4. Supplementation of grazing suckling beef calves receiving different energy sources

    Directory of Open Access Journals (Sweden)

    Josilaine Aparecida da Costa Lima

    2016-06-01

    Full Text Available The aim of this study was to evaluate the effect of different energy sources - corn, sorghum, and wheat bran - on performance, intake, digestibility, and nitrogen utilization efficiency of beef calves subjected to creep feeding. Thirty-four calves (12 males and 22 females with initial age and weight of four months and 108±3.9 kg, respectively, were used in a randomized-block experimental design with four treatments and two blocks (males and females. Treatments were control (MM, a mineral mixture ad libitum; corn (C; corn + sorghum (C+S; and corn + sorghum + wheat bran (C+S+WB. Supplements contained approximately 20% crude protein (CP, and were fed in the amount of 0.5% of body weight. Supplemented animals had higher performance (P < 0.05 when compared with those on treatment MM. Supplementation increased (P < 0.05 the intakes of dry matter (DM, organic matter (OM, crude protein (CP, neutral detergent fiber corrected for ash and protein (NDFap, non-fibrous carbohydrates (NFC, digestible neutral detergent fiber (dNDF, and digestible organic matter (dOM. The digestibility of NFC was higher (P < 0.05 in the supplemented treatments. The C+S and C+S+WB treatments provided increased digestibility (P < 0.05 of OM, CP, and NDFap. The synthesis of nitrogen compounds was higher (P < 0.05 in animals on treatment C as compared with those on the other supplemented treatments. Animals on treatments C+S and C+S+WB had higher (P < 0.05 nitrogen utilization efficiency compared with those on the other treatments. Concentrate supplementation improved the animal performance. The use of other energy sources (sorghum or wheat bran in association with corn is recommended for suckling calves.

  5. Potential energy surface and binding energy in the presence of an external electric field: modulation of anion-π interactions for graphene-based receptors.

    Science.gov (United States)

    Foroutan-Nejad, Cina; Marek, Radek

    2014-02-14

    Measuring the binding energy or scanning the potential energy surface (PES) of the charged molecular systems in the presence of an external electric field (EEF) requires a careful evaluation of the origin-dependency of the energy of the system and references. Scanning the PES for charged or purely ionic systems for obtaining the intrinsic energy barriers needs careful analysis of the electric work applied on ions by the EEF. The binding energy in the presence of an EEF is different from that in the absence of an electric field as the binding energy is an anisotropic characteristic which depends on the orientation of molecules with respect to the EEF. In this contribution we discuss various aspects of the PES and the concept of binding energy in the presence of an EEF. In addition, we demonstrate that the anion-π bonding properties can be modulated by applying a uniform EEF, which has a more pronounced effect on the larger, more polarizable π-systems. An analogous behavior is presumed for cation-π systems. We predict that understanding the phenomenon introduced in the present account has enormous potential, for example, for separating charged species on the surface of polarizable two-dimensional materials such as graphene or the surface of carbon nanotubes, in desalination of water.

  6. Molecular ion sources for low energy semiconductor ion implantation (invited)

    Energy Technology Data Exchange (ETDEWEB)

    Hershcovitch, A., E-mail: hershcovitch@bnl.gov [Brookhaven National Laboratory, Upton, New York 11973 (United States); Gushenets, V. I.; Bugaev, A. S.; Oks, E. M.; Vizir, A.; Yushkov, G. Yu. [High Current Electronics Institute, Siberian Branch of Russian Academy of Sciences, Tomsk 634055 (Russian Federation); Seleznev, D. N.; Kulevoy, T. V.; Kozlov, A.; Kropachev, G. N.; Kuibeda, R. P.; Minaev, S. [Institute for Theoretical and Experimental Physics, Moscow 117218 (Russian Federation); Dugin, S.; Alexeyenko, O. [State Scientific Center of the Russian Federation State Research Institute for Chemistry and Technology of Organoelement Compounds, Moscow (Russian Federation)

    2016-02-15

    Smaller semiconductors require shallow, low energy ion implantation, resulting space charge effects, which reduced beam currents and production rates. To increase production rates, molecular ions are used. Boron and phosphorous (or arsenic) implantation is needed for P-type and N-type semiconductors, respectively. Carborane, which is the most stable molecular boron ion leaves unacceptable carbon residue on extraction grids. A self-cleaning carborane acid compound (C{sub 4}H{sub 12}B{sub 10}O{sub 4}) was synthesized and utilized in the ITEP Bernas ion source resulting in large carborane ion output, without carbon residue. Pure gaseous processes are desired to enable rapid switch among ion species. Molecular phosphorous was generated by introducing phosphine in dissociators via 4PH{sub 3} = P{sub 4} + 6H{sub 2}; generated molecular phosphorous in a pure gaseous process was then injected into the HCEI Calutron-Bernas ion source, from which P{sub 4}{sup +} ion beams were extracted. Results from devices and some additional concepts are described.

  7. Axion-Like particles from extragalactic High Energy sources

    Science.gov (United States)

    Conrad, J.; Meyer, M.; Montanino, D.

    2016-05-01

    Background radiation fields (such as Extragalactic Background Light, EBL, or Cosmic Microwave Background, CMB) pervade the Universe. Above a certain energy any gamma ray flux emitted by an extragalactic source should be attenuated by the process γ+ γ(bgk) → e + + e - pair production. We have considered a scenario in which the photons are partly converted into light Axion Like Particles (ALPs) in the local magnetic field of an (extragalactic) source. Then, while the unconverted fraction of photons undergo absorption, the ALP component travel to our galaxy where is converted back to photons by the galactic magnetic field resulting in a sort of cosmic light shining through wall effect. In particular, we have considered two scenarios: 1) conversion in the turbulent magnetic field inside a galaxy cluster; and 2) conversion of photons in the coherent magnetic field at parsec scales in a Blazar jet. Afterwards, we have also analyzed mock data coming from a hypothetical Imaging Air Cherenkov Telescopes (IACT) array with characteristics similar to the Cherenkov Telescope Array (CTA) and we have investigated the dependence of the sensitivity to detect a gamma ray excess on the magnetic field parameters.

  8. Economic costs and benefits of the renewable energy sources; Costi e benefici economici delle fonti rinnovabili

    Energy Technology Data Exchange (ETDEWEB)

    De Leo, G. A. [Parma Univ., Parma (Italy). Dipt. di Scienze Ambientali; Rizzi, L. [Milan Politecnico, Milan (Italy). Dipt. di Elettronica; Caizzi, A. [Cesi Spa, Business Unit Ambiente, Milan (Italy)

    2001-08-01

    In this work it has been analysed the potential diffusion of renewable energy sources and co-generation in the Italian market on the basis of the level of maturation of the different technologies, predicted market growth and environmental impacts associated to them. A sensitivity analysis on external costs generated by global climate changes has allowed everybody to assess how possible errors in estimating the potential impact of greenhouse gasses can affect the estimate of the economic performances of different scenarios of energetic development. On the basis of these considerations, it can be outlined a potential doubling of energy production by renewable energies in the next 10 years, with specific reference of small hydroelectric, biogass and eolic power plants. [Italian] Viene analizzata la capacita' di penetrazione delle fonti di energia rinnovabile e della cogenerazione nel mercato italiano sulla base dello stato di maturazione delle varie tecnologie e gli impatti ambientali ad esse associate. L'articolo mostra che il rispetto del vincolo di Kyoto comporterebbe in ultima analisi non un aggravio dei costi per la collettivita', ma addirittura un risparmio di 11 lire per ogni kWh prodotto, ovvero oltre il 10% rispetto ai costi totali.

  9. Information systems and technology transfer programs on geothermal energy and other renewable sources of energy

    Energy Technology Data Exchange (ETDEWEB)

    Lippmann, M.J.; Antunez, E.

    1996-01-01

    In order to remain competitive, it is necessary to stay informed and use the most advanced technologies available. Recent developments in communication, like the Internet and the World Wide Web, enormously facilitate worldwide data and technology transfer. A compilation of the most important sources of data on renewable energies, especially geothermal, as well as lists of relevant technology transfer programs are presented. Information on how to gain access to, and learn more about them, is also given.

  10. Using additional external inputs to forecast water quality with an artificial neural network for contamination event detection in source water

    Science.gov (United States)

    Schmidt, F.; Liu, S.

    2016-12-01

    Source water quality plays an important role for the safety of drinking water and early detection of its contamination is vital to taking appropriate countermeasures. However, compared to drinking water, it is more difficult to detect contamination events because its environment is less controlled and numerous natural causes contribute to a high variability of the background values. In this project, Artificial Neural Networks (ANNs) and a Contamination Event Detection Process (CED Process) were used to identify events in river water. The ANN models the response of basic water quality sensors obtained in laboratory experiments in an off-line learning stage and continuously forecasts future values of the time line in an on-line forecasting step. During this second stage, the CED Process compares the forecast to the measured value and classifies it as regular background or event value, which modifies the ANN's continuous learning and influences its forecasts. In addition to this basic setup, external information is fed to the CED Process: A so-called Operator Input (OI) is provided to inform about unusual water quality levels that are unrelated to the presence of contamination, for example due to cooling water discharge from a nearby power plant. This study's primary goal is to evaluate how well the OI fits into the design of the combined forecasting ANN and CED Process and to understand its effects on the online forecasting stage. To test this, data from laboratory experiments conducted previously at the School of Environment, Tsinghua University, have been used to perform simulations highlighting features and drawbacks of this method. Applying the OI has been shown to have a positive influence on the ANN's ability to handle a sudden change in background values, which is unrelated to contamination. However, it might also mask the presence of an event, an issue that underlines the necessity to have several instances of the algorithm run in parallel. Other difficulties

  11. Low energy electron point source microscopy: beyond imaging.

    Science.gov (United States)

    Beyer, André; Gölzhäuser, Armin

    2010-09-01

    Low energy electron point source (LEEPS) microscopy has the capability to record in-line holograms at very high magnifications with a fairly simple set-up. After the holograms are numerically reconstructed, structural features with the size of about 2 nm can be resolved. The achievement of an even higher resolution has been predicted. However, a number of obstacles are known to impede the realization of this goal, for example the presence of electric fields around the imaged object, electrostatic charging or radiation induced processes. This topical review gives an overview of the achievements as well as the difficulties in the efforts to shift the resolution limit of LEEPS microscopy towards the atomic level. A special emphasis is laid on the high sensitivity of low energy electrons to electrical fields, which limits the structural determination of the imaged objects. On the other hand, the investigation of the electrical field around objects of known structure is very useful for other tasks and LEEPS microscopy can be extended beyond the task of imaging. The determination of the electrical resistance of individual nanowires can be achieved by a proper analysis of the corresponding LEEPS micrographs. This conductivity imaging may be a very useful application for LEEPS microscopes.

  12. Integration of available regenerative energy sources in community networks for both electricity and heating

    Energy Technology Data Exchange (ETDEWEB)

    Alcalde Melo, Henrique

    2013-03-06

    In the last years, energy prices for German households have been increasing constantly. Some reasons for that include: the dependency of Germany on external fossil fuels to supply its energy demand, the decision to invest in renewable energy generation and to shut down all its nuclear power plants. Nowadays households are already able to generate energy on-site, however the generation potential depends on climatic conditions as well as the specific location and the type of the building. The aim of this work is to evaluate whether a community of new efficient single-family houses can generate enough energy on-site to supply its electricity and heating demand over the year based on renewable energy sources and with the support of energy storage systems, including electric vehicles. The theoretical community is situated in the city of Cottbus, Germany. For this community, an electricity load profile was designed based on the use of common devices and separated in controllable and uncontrollable loads. Electricity is generated on-site through photovoltaic panels and small wind turbines, and the electricity generation potential is evaluated based on the community's available space, which is rather limited, and the actual regulations in the State of Brandenburg. A comparison of the available technologies to supply the heating demand as well as to store energy in the household sector is presented and discussed. It is assumed that each household has an electric vehicle that can be charged and also discharged in the community as an extra energy storage system. A software simulation system was designed with which an energy balance analysis is carried out based on hourly values of supply and demand. Under the assumptions taken for this study, the results of the simulation show that the community is able to generate more energy than consumed throughout a year, however in a few occasions there is not enough energy available to supply the community's energy demand

  13. Solid cancer mortality associated with chronic external radiation exposure at the French atomic energy commission and nuclear fuel company.

    Science.gov (United States)

    Metz-Flamant, C; Samson, E; Caër-Lorho, S; Acker, A; Laurier, D

    2011-07-01

    Studies of nuclear workers make it possible to directly quantify the risks associated with ionizing radiation exposure at low doses and low dose rates. Studies of the CEA (Commissariat à l'Energie Atomique) and AREVA Nuclear Cycle (AREVA NC) cohort, currently the most informative such group in France, describe the long-term risk to nuclear workers associated with external exposure. Our aim is to assess the risk of mortality from solid cancers among CEA and AREVA NC nuclear workers and its association with external radiation exposure. Standardized mortality ratios (SMRs) were calculated and internal Poisson regressions were conducted, controlling for the main confounding factors [sex, attained age, calendar period, company and socioeconomic status (SES)]. During the period 1968-2004, there were 2,035 solid cancers among the 36,769 CEA-AREVA NC workers. Cumulative external radiation exposure was assessed for the period 1950-2004, and the mean cumulative dose was 12.1 mSv. Mortality rates for all causes and all solid cancers were both significantly lower in this cohort than in the general population. A significant excess of deaths from pleural cancer, not associated with cumulative external dose, was observed, probably due to past asbestos exposure. We observed a significant excess of melanoma, also unassociated with dose. Although cumulative external dose was not associated with mortality from all solid cancers, the central estimated excess relative risk (ERR) per Sv of 0.46 for solid cancer mortality was higher than the 0.26 calculated for male Hiroshima and Nagasaki A-bomb survivors 50 years or older and exposed at the age of 30 years or older. The modification of our results after stratification for SES demonstrates the importance of this characteristic in occupational studies, because it makes it possible to take class-based lifestyle differences into account, at least partly. These results show the great potential of a further joint international study of

  14. Accurate double many-body expansion potential energy surface of HS2A2A‧) by scaling the external correlation

    Science.gov (United States)

    Lu-Lu, Zhang; Yu-Zhi, Song; Shou-Bao, Gao; Yuan, Zhang; Qing-Tian, Meng

    2016-05-01

    A globally accurate single-sheeted double many-body expansion potential energy surface is reported for the first excited state of HS2 by fitting the accurate ab initio energies, which are calculated at the multireference configuration interaction level with the aug-cc-pVQZ basis set. By using the double many-body expansion-scaled external correlation method, such calculated ab initio energies are then slightly corrected by scaling their dynamical correlation. A grid of 2767 ab initio energies is used in the least-square fitting procedure with the total root-mean square deviation being 1.406 kcal·mol-1. The topographical features of the HS2(A2A‧) global potential energy surface are examined in detail. The attributes of the stationary points are presented and compared with the corresponding ab initio results as well as experimental and other theoretical data, showing good agreement. The resulting potential energy surface of HS2(A2A‧) can be used as a building block for constructing the global potential energy surfaces of larger S/H molecular systems and recommended for dynamic studies on the title molecular system. Project supported by the National Natural Science Foundation of China (Grant No. 11304185), the Taishan Scholar Project of Shandong Province, China, the Shandong Provincial Natural Science Foundation, China (Grant No. ZR2014AM022), the Shandong Province Higher Educational Science and Technology Program, China (Grant No. J15LJ03), the China Postdoctoral Science Foundation (Grant No. 2014M561957), and the Post-doctoral Innovation Project of Shandong Province, China (Grant No. 201402013).

  15. Achieving low effluent NO3-N and TN concentrations in low influent chemical oxygen demand (COD) to total Kjeldahl nitrogen (TKN) ratio without using external carbon source

    Science.gov (United States)

    Cao, Jiashun; Oleyiblo, Oloche James; Xue, Zhaoxia; Otache, Y. Martins; Feng, Qian

    2015-07-01

    Two mathematical models were used to optimize the performance of a full-scale biological nutrient removal (BNR) activated treatment plant, a plug-flow bioreactors operated in a 3-stage phoredox process configuration, anaerobic anoxic oxic (A2/O). The ASM2d implemented on the platform of WEST2011 software and the BioWin activated sludge/anaerobic digestion (AS/AD) models were used in this study with the aim of consistently achieving the designed effluent criteria at a low operational cost. Four ASM2d parameters (the reduction factor for denitrification , the maximum growth rate of heterotrophs (µH), the rate constant for stored polyphosphates in PAOs ( q pp), and the hydrolysis rate constant ( k h)) were adjusted. Whereas three BioWin parameters (aerobic decay rate ( b H), heterotrophic dissolved oxygen (DO) half saturation ( K OA), and Y P/acetic) were adjusted. Calibration of the two models was successful; both models have average relative deviations (ARD) less than 10% for all the output variables. Low effluent concentrations of nitrate nitrogen (N-NO3), total nitrogen (TN), and total phosphorus (TP) were achieved in a full-scale BNR treatment plant having low influent chemical oxygen demand (COD) to total Kjeldahl nitrogen (TKN) ratio (COD/TKN). The effluent total nitrogen and nitrate nitrogen concentrations were improved by 50% and energy consumption was reduced by approximately 25%, which was accomplished by converting the two-pass aerobic compartment of the plug-flow bioreactor to anoxic reactors and being operated in an alternating mode. Findings in this work are helpful in improving the operation of wastewater treatment plant while eliminating the cost of external carbon source and reducing energy consumption.

  16. Fine-Grained Energy Modeling for the Source Code of a Mobile Application

    DEFF Research Database (Denmark)

    Li, Xueliang; Gallagher, John Patrick

    2016-01-01

    The goal of an energy model for source code is to lay a foundation for the application of energy-aware programming techniques. State of the art solutions are based on source-line energy information. In this paper, we present an approach to constructing a fine-grained energy model which is able...

  17. The renewable energies sources in France 1970-2000; Les energies renouvelables en France 1970-2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The objective of this report is to describe the energy production from renewable sources in France since 1970. In France the rate of using renewable energy sources is unequal. Some of them as hydro energy show a confirmed industrial and commercial interest when other techniques have not still reach the same level of maturity. The renewable energy sources chosen to calculate the electric and thermal production of France are: for electric power, hydro energy, wind energy, solar energy, geothermal energy, the urban wastes, the wood wastes, the harvesting residues, the biogas. For the thermal production, the thermal solar energy, the geothermal energy, the urban wastes, the wood and wood wastes, the harvesting residues, the biogas and bio fuels. The figures are marked in thirty tables. (N.C.)

  18. The ocean as the eternal energy source; De oceaan als eeuwige energiebron

    Energy Technology Data Exchange (ETDEWEB)

    Laban, C.; Speelman, H. [Nederlands Instituut voor Toegepaste Geowetenschappen TNO NITG-TNO, Delft (Netherlands)

    1998-06-01

    The oceans contain enormous reserves of fossil fuels. Also use can be made of sustainable energy in the form of wave energy, tidal power and heat. The options to use the oceans as an energy source are outlined. 4 refs.

  19. Spatiotemporal Modeling for Assessing Complementarity of Renewable Energy Sources in Distributed Energy Systems

    Science.gov (United States)

    Ramirez Camargo, L.; Zink, R.; Dorner, W.

    2015-07-01

    Spatial assessments of the potential of renewable energy sources (RES) have become a valuable information basis for policy and decision-making. These studies, however, do not explicitly consider the variability in time of RES such as solar energy or wind. Until now, the focus is usually given to economic profitability based on yearly balances, which do not allow a comprehensive examination of RES-technologies complementarity. Incrementing temporal resolution of energy output estimation will permit to plan the aggregation of a diverse pool of RES plants i.e., to conceive a system as a virtual power plant (VPP). This paper presents a spatiotemporal analysis methodology to estimate RES potential of municipalities. The methodology relies on a combination of open source geographic information systems (GIS) processing tools and the in-memory array processing environment of Python and NumPy. Beyond the typical identification of suitable locations to build power plants, it is possible to define which of them are the best for a balanced local energy supply. A case study of a municipality, using spatial data with one square meter resolution and one hour temporal resolution, shows strong complementarity of photovoltaic and wind power. Furthermore, it is shown that a detailed deployment strategy of potential suitable locations for RES, calculated with modest computational requirements, can support municipalities to develop VPPs and improve security of supply.

  20. Optimization of energy consumption and cost effectiveness of modular buildings by using renewable energy sources

    Directory of Open Access Journals (Sweden)

    Peter Tauš

    2015-10-01

    Full Text Available Problems of the temporary structures are generally dealt with by the use of modular buildings. These actually meet the terms of low costs, as appose to the terms of convenience of use, or energy efficiency in operation. Using the latest technologies in the production of the modular buildings has improved the operation sufficiently; it is now possible to use them entirely for purposes associated with the use of the buildings. Office buildings, warehouses, and conference rooms have become common standard. In Slovakia, we can already see it as a normal part of cities and municipalities: social housing, schools, and kindergartens, which were all built using this technology. During the assessment phase of these buildings, energy efficiency is always the priority. This article is aimed at establishing the economic potential of modular buildings in the field of use of renewable energy sources. For the formulation of the problem and the definition of borders of studied parameters, we proposed a four-dimensional competency decision-making space. This determines the examination process that should identify areas in which it is appropriate to consider and assess the use of renewable energy sources.

  1. Study of energy recovery and power generation from alternative energy source

    Directory of Open Access Journals (Sweden)

    Abdulhakim Amer A. Agll

    2014-11-01

    Full Text Available The energy requirement pattern of world is growing up and developing technology. The available sources, while exhausting and not friendly to the environment, are highly used. Looking at partial supply and different options of environment problems associated with usage, renewable energy sources are getting attention. MSW (Municipal solid waste composition data had been collected from 1997 to 2009, in Benghazi Libya, to evaluate the waste enthalpy. An incinerator with capacity of 47,250 kg/h was confirmed to burn all the quantity of waste generated by the city through the next 15 years. Initial study was performed to investigate energy flow and resource availability to insure sustainable MSW required by the incinerator to work at its maximum capacity during the designated period. The primary purpose of the paper is to discuss the design of Rankin steam cycle for the generation of both power (PG and combined heat power (CHP. In the power generation case, the system was found to be able to generate electrical power of 13.1 MW. Including the combined heat power case, the results showed that the system was able to produce 6.8 million m3/year of desalinated water and generate 11.33 MW of electricity. In conclusion, the CHP designed system has the greatest potential to maximize energy saving, due to the optimal combination of heat production and electricity generation.

  2. SPATIOTEMPORAL MODELING FOR ASSESSING COMPLEMENTARITY OF RENEWABLE ENERGY SOURCES IN DISTRIBUTED ENERGY SYSTEMS

    Directory of Open Access Journals (Sweden)

    L. Ramirez Camargo

    2015-07-01

    Full Text Available Spatial assessments of the potential of renewable energy sources (RES have become a valuable information basis for policy and decision-making. These studies, however, do not explicitly consider the variability in time of RES such as solar energy or wind. Until now, the focus is usually given to economic profitability based on yearly balances, which do not allow a comprehensive examination of RES-technologies complementarity. Incrementing temporal resolution of energy output estimation will permit to plan the aggregation of a diverse pool of RES plants i.e., to conceive a system as a virtual power plant (VPP. This paper presents a spatiotemporal analysis methodology to estimate RES potential of municipalities. The methodology relies on a combination of open source geographic information systems (GIS processing tools and the in-memory array processing environment of Python and NumPy. Beyond the typical identification of suitable locations to build power plants, it is possible to define which of them are the best for a balanced local energy supply. A case study of a municipality, using spatial data with one square meter resolution and one hour temporal resolution, shows strong complementarity of photovoltaic and wind power. Furthermore, it is shown that a detailed deployment strategy of potential suitable locations for RES, calculated with modest computational requirements, can support municipalities to develop VPPs and improve security of supply.

  3. Mechanobiology of cartilage: how do internal and external stresses affect mechanochemical transduction and elastic energy storage?

    Science.gov (United States)

    Silver, Frederick H; Bradica, Gino

    2002-12-01

    Articular cartilage is a multilayered structure that lines the surfaces of all articulating joints. It contains cells, collagen fibrils, and proteoglycans with compositions that vary from the surface layer to the layer in contact with bone. It is composed of several zones that vary in structure, composition, and mechanical properties. In this paper we analyze the structure of the extracellular matrix found in articular cartilage in an effort to relate it to the ability of cartilage to store, transmit, and dissipate mechanical energy during locomotion. Energy storage and dissipation is related to possible mechanisms of mechanochemical transduction and to changes in cartilage structure and function that occur in osteoarthritis. In addition, we analyze how passive and active internal stresses affect mechanochemical transduction in cartilage, and how this may affect cartilage behavior in health and disease.

  4. Energy relaxation in galaxies induced by an external environment and/or incoherent internal pulsations

    CERN Document Server

    Kandrup, H E

    2001-01-01

    This paper explores the phenomenon of energy relaxation for stars in a galaxy embedded in a high density environment that is subjected continually to perturbations reflecting the presence of other nearby galaxies and/or incoherent internal pulsations. The analysis is similar to earlier analyses of energy relaxation induced by binary encounters between nearby stars and between stars and giant molecular clouds in that the perturbations are idealised as a sum of near-random events which can be modeled as diffusion and dynamical friction. However, the analysis differs in one important respect: because the time scale associated with these perturbations need not be short compared with the characteristic dynamical time t_D for stars in the original galaxy, the diffusion process cannot be modeled as resulting from a sequence of instantaneous kicks, i.e., white noise. Instead, the diffusion is modeled as resulting from random kicks of finite duration, i.e., coloured noise characterised by a nonzero autocorrelation tim...

  5. External conditions for decisions on new energy capacity in Norway; Rammevilkaar for beslutninger om ny energikapasitet

    Energy Technology Data Exchange (ETDEWEB)

    Bowitz, Einar; Aarhus, Knut

    1998-12-01

    This report reviews the environmental disadvantages of different energy technologies, compares the measures taken against the negative impacts of these technologies on the environment, and discusses the relationship between how severe a disadvantage is considered to be and the power of the measures used to combat them. The work concentrates on hydroelectric power, wind power, biomass energy, gas, and heat pumps. It is found that current regulations and taxes on hydroelectric power projects do not guarantee that the projects are taxed in harmony with their environmental disadvantages. Present taxation of gas power amounts to less than the environmental costs. The disadvantages in bioenergy are project specific, but on average the cleaning requirements on this technology imply a rise in costs about equal to the environmental costs. The disadvantages relating to heat pumps are negligible. District heating plants are seldom profitable. Yet regulations of the network owners imply that they may keep a larger share of the income from increased energy sale if this takes place as district heating rather than electricity. Wind power is favoured over small hydropower plants but not over bioenergy and heat pumps. Import of energy based on old coal power plants entail environmental disadvantages for the exporting country. The routing of a new power line is often more controversial than the location of a new power plant. Thus, local compensations should be given to the municipalities involved so that socio-economically profitable projects can be realized. At present, tariffs do not reflect the fact that increased demand today may expedite the need to upgrade the central network. 37 refs., 4 figs., 12 tabs.

  6. The Economics of Mitigation of Water Pollution Externalities from Biomass Production for Energy

    Directory of Open Access Journals (Sweden)

    Naveen Adusumilli

    2014-12-01

    Full Text Available To fulfill the national bioenergy goals of the United States, conversion of marginal lands to intensive biomass crop production and/or application of greater amounts of nutrients to existing cropland could be expected. Such change in agricultural practices could produce unintended environmental consequences such as water quality degradation. Select Best Management Practices (BMPs are evaluated for water quality mitigation effectiveness as well as for their relative cost-effectiveness, issues that are often ignored in evaluation of biofuels as a sustainable solution for energy demand. The water quality impacts of converting pastureland to intensive biomass production for biofuel, evaluated using the Soil Water Assessment Tool (SWAT, indicate significant increases in erosion and nutrient loadings to water bodies. Hydrologic and economic evaluation of the BMPs indicate their implementation produced effective water pollution mitigation but at substantial costs, accentuating the sustainability issue related to the economics of renewable fuels. U.S. national energy policy designed around achieving energy independence should also consider environmental and economic trade-offs for biofuels to be an economically and environmentally sustainable alternative to fossil fuels.

  7. Solar energy as an alternate energy source to mixed oxide fuels in light-water cooled reactors

    Energy Technology Data Exchange (ETDEWEB)

    Bertini, H.W.

    1977-06-30

    Supplemental information pertaining to the generic environmental impact statement on the Pu recycling process for mixed oxide light-water cooled reactors (GESMO) was requested from several sources. In particular, the role of alternate sources of energy was to be explored and the implications of these alternate sources to the question of Pu recycle in LWRs were to be investigated. In this vein, solar energy as an alternate source is the main subject of this report, along with other information related to solar energy. The general conclusion is that solar energy should have little effect on the decisions concerning GESMO.

  8. 3rd Miami international conference on alternative energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Nejat Veziroglu, T.

    1980-01-01

    The conference includes sessions on solar energy, ocean thermal energy, wind energy, hydro power, nuclear breeders and nuclear fusion, synthetic fuels from coal or wastes, hydrogen production and uses, formulation of workable policies on energy use and energy conservation, heat and energy storage, and energy education. The volume of the proceedings presents the papers and lectures in condensed format grouped by subject under forty-two sessions for 319 presentations.

  9. MESMER: an open-source master equation solver for multi-energy well reactions.

    Science.gov (United States)

    Glowacki, David R; Liang, Chi-Hsiu; Morley, Christopher; Pilling, Michael J; Robertson, Struan H

    2012-09-27

    The most commonly used theoretical models for describing chemical kinetics are accurate in two limits. When relaxation is fast with respect to reaction time scales, thermal transition state theory (TST) is the theoretical tool of choice. In the limit of slow relaxation, an energy resolved description like RRKM theory is more appropriate. For intermediate relaxation regimes, where much of the chemistry in nature occurs, theoretical approaches are somewhat less well established. However, in recent years master equation approaches have been successfully used to analyze and predict nonequilibrium chemical kinetics across a range of intermediate relaxation regimes spanning atmospheric, combustion, and (very recently) solution phase organic chemistry. In this article, we describe a Master Equation Solver for Multi-Energy Well Reactions (MESMER), a user-friendly, object-oriented, open-source code designed to facilitate kinetic simulations over multi-well molecular energy topologies where energy transfer with an external bath impacts phenomenological kinetics. MESMER offers users a range of user options specified via keywords and also includes some unique statistical mechanics approaches like contracted basis set methods and nonadiabatic RRKM theory for modeling spin-hopping. It is our hope that the design principles implemented in MESMER will facilitate its development and usage by workers across a range of fields concerned with chemical kinetics. As accurate thermodynamics data become more widely available, electronic structure theory is increasingly reliable, and as our fundamental understanding of energy transfer improves, we envision that tools like MESMER will eventually enable routine and reliable prediction of nonequilibrium kinetics in arbitrary systems.

  10. Energy resources of the 21st century: problems and forecasts. Can renewable energy sources replace fossil fuels?

    Science.gov (United States)

    Arutyunov, V. S.; Lisichkin, G. V.

    2017-08-01

    The state of the art and the major trends of development of world energy engineering are analyzed. It is concluded that throughout the 21st century the role of alternative sources will remain rather modest. Fossil fuel will still be the major source of energy until the end of the century. Because of depletion of accessible oil resources, the proportion of crude oil in the world energy balance will constantly decline, while the proportion of natural gas will grow. It is shown that energy production from any source, including alternative sources, cannot be environmentally benign if the scale of production is large. In the long term, humanity has no sources other than fusion energy, but transition to this source would not solve the problem of the planet's heat balance. The bibliography includes 70 references.

  11. Wind, hydro or mixed renewable energy source: Preference for electricity products when the share of renewable energy increases

    DEFF Research Database (Denmark)

    Yang, Yingkui; Solgaard, Hans Stubbe; Haider, Wolfgang

    2016-01-01

    While the share of renewable energy, especially wind power, increases in the energy mix, the risk of temporary energy shortage increases as well. Thus, it is important to understand consumers' preference for the renewable energy towards the continuous growing renewable energy society. We use...... a discrete choice experiment to infer consumers' preferences when the share of renewable energy increases. The study results indicate that consumers are generally willing to pay extra for an increasing share of renewable energy, but the renewable energy should come from a mixture of renewable energy sources...

  12. The Danish National Prescription Registry in studies of a biological pharmaceutical: palivizumab – validation against two external data sources

    Directory of Open Access Journals (Sweden)

    Haerskjold A

    2015-05-01

    Full Text Available Ann Haerskjold,1,2 Lonny Henriksen,2 Susanne Way,1 Mikkel Malham,3 Jesper Hallas,4 Lars Pedersen,5 Lone Graff Stensballe1 1The Child and Adolescent Clinic 4072, Copenhagen University Hospital Rigshospitalet, Copenhagen, Denmark; 2The Research Unit Women's and Children's Health, The Juliane Marie Centre for Women, Children and Reproduction, Copenhagen University Hospital Rigshospitalet, Copenhagen, Denmark; 3Department of Pediatrics, Hvidovre University Hospital, Hvidovre, Denmark; 4Department of Clinical Pharmacology, Institute of Public Health, University of Southern Denmark, Denmark; 5Department of Clinical Epidemiology, Aarhus University Hospital, Aarhus N, Denmark Background: National prescription databases are important tools in pharmacoepidemiological studies investigating potential long-term adverse events after drug use. Palivizumab is a biological pharmaceutical used as passive prophylaxis against severe infection with respiratory syncytial virus in high-risk children. Objective: To assess the registration of palivizumab in the Danish National Prescription Registry (DNPR and to examine if palivizumab reimbursement data obtained from the Danish Health and Medicines Authority could serve as a supplement to data from the DNPR. Methods: Registration of palivizumab exposure in the DNPR between 1999 and 2010 was compared to two external data sources: registration of palivizumab exposure in medical records, and palivizumab reimbursement data. Results: During the study period, 182 children with palivizumab exposure were registered in the DNPR. A total of 207 children were registered for palivizumab reimbursement. The sensitivity of palivizumab registration in the DNPR was 26% (20%–34%, and the specificity of no palivizumab registration in the DNPR was 97% (94%–99%, with data from the medical record as the reference. Palivizumab registration sensitivity in reimbursement data was 29% (22%–36%, and the specificity of no palivizumab

  13. Solar-hydrogen energy as an alternative energy source for mobile robots and the new-age car

    Science.gov (United States)

    Sulaiman, A.; Inambao, F.; Bright, G.

    2014-07-01

    The disastrous effects of climate change as witnessed in recent violent storms, and the stark reality that fossil fuels are not going to last forever, is certain to create renewed demands for alternative energy sources. One such alternative source, namely solar energy, although unreliable because of its dependence on available sunlight, can nevertheless be utilised to generate a secondary source of energy, namely hydrogen, which can be stored and thereby provide a constant and reliable source of energy. The only draw-back with hydrogen, though, is finding efficient means for its storage. This study demonstrates how this problem can be overcome by the use of metal hydrides which offers a very compact and safe way of storing hydrogen. It also provides a case study of how solar and hydrogen energy can be combined in an energy system to provide an efficient source of energy that can be applied for modern technologies such as a mobile robot. Hydrogen energy holds out the most promise amongst the various alternative energy sources, so much so that it is proving to be the energy source of choice for automobile manufacturers in their quest for alternative fuels to power their cars of the future.

  14. Experimental study of an externally finned tube with internal heat transfer enhancement for phase change thermal energy storage

    Science.gov (United States)

    Martinelli, M.; Bentivoglio, F.; Couturier, R.; Fourmigué, J.-F.; Marty, P.

    2016-09-01

    After having presented the design of a latent heat thermal energy storage system (LHTESS) for district heating, experimental results of a vertical tube-in-shell LHTESS are discussed. The tube is radially finned on its external wall to enhance the heat transfer in the phase change material. The test rig is operated with flow conditions corresponding to the proposed design. As the internal flow of heat transfer fluid (HTF) appears to be laminar and is highly influenced by buoyancy forces, which results in mixed convection regime, cross-sectional area reducers are installed inside the HTF tube in order to reduce the Rayleigh number and thus natural convection. Experimental results are presented for two finned tubes, with and without internal heat transfer enhancement respectively.

  15. Smart Energy Gateway (SEG) for optimized energy flow control in new generation of vehicle's powernet with on-line multi voltage power sources

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, Ignacio; Ferre, Antoni [LEAR Corporation, Tarragona (Spain)

    2010-07-01

    CO{sub 2} emissions reduction leads OEMs as a matter of facts to search alternative power trains that optimize the overall electrical power flow starting from fixed installed energy basis specified for each vehicle to accomplish with expected performance. Optimization comes from uses of already existing energy sources in the vehicle (solar radiation, exhaust gas heat waste recovery, etc.) and external ones available in certain vehicle modes as parking (grid, DC charge system, etc.). Particularity of these sources is different nature and optimum working ranges in terms of voltage and current and the mismatching among them in the expected vehicle conditions or modes. To solve this lack of smart power management in the net, this paper presents SEG (Smart Energy Gateway), a MIPEC based concept doted of Intelligence and Energy Management algorithms able to carry out by actuation over Si switches and DCDC converter working points the functionality of smartly drive the power from and to the requested source/loads at any time. Also system overview is presented along with state flow charts, and practical concreted topologies for implementation. (orig.)

  16. Valuation of flexible solutions with alternative fuel cell energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Haahtela, T.; Surakka, T.; Malinen, P. [Helsinki Univ. of Technology, Espoo (Finland). BIT Research Centre

    2009-07-01

    Fuel cells are an emerging technology with high potential, but also with significant market uncertainty. Fuel cells are currently in the transition from field trials to commercial introduction, and firms need to consider whether the technology fulfils the reliability and cost requirements of their current and upcoming products. This paper presented a framework to assist managers in finding the suitable valuation method for comparing different alternatives with emerging fuel cell technology. The dynamic valuation approaches of decision tree analysis, real options and system dynamics were discussed as they help in choosing the optimal timing and product structure over a long time period. Three examples of applications with fuel cells were briefly presented. The paper also addressed how the suggested valuation methods could be applied to them. These applications included maritime buoys; removable crisis management energy source container; and electrification of public transportation. It was concluded that the fuel cell technology has already become economically feasible in certain application areas. Improving technical reliability and cost reductions will make fuel cells even more competitive alternatives in new application areas. 9 refs., 1 tab., 1 fig.

  17. ARC technology turns animal manure into new source of energy

    Energy Technology Data Exchange (ETDEWEB)

    Golka, V.

    2003-09-30

    Bio-based fertilizers, reusable water and reduced greenhouse gas emissions are the results of the Integrated Manure Utilization System (IMUS) began some five years ago at the Alberta Research Council. The process incorporates anaerobic digestion that produces biogas, which is then used to generate electricity, while the nutrient byproducts of the process are used to produce bio-based fertilizer and water, which is reusable for applications like irrigation. A pilot-scale IMUS plant was constructed at Highland Feeders in Vegreville, which will produce one MW of electricity from the manure produced by 7,500 head of cattle. Commercialization of the technology is underway as a joint venture involving the Alberta Research Council, industry, the federal and provincial governments and non-governmental agencies. Because IMUS is designed to overcome the challenges associated with high-solid manure typical of most outdoor feedlots in North America, the technology is adaptable to other biomass sources, including liquid manure, food processing waste and municipal waste; a significant development in the field of renewable energy technologies. The demonstration project is expected to reduce greenhouse gas emissions by 740,000 tonnes annually based on cattle manure only; more when other livestock, such as poultry and dairy are included.

  18. Fiscal Policy for Renewable Energy Sources and Its Economic Impact

    Directory of Open Access Journals (Sweden)

    Rita Helbra Tenrini

    2014-01-01

    Full Text Available Indonesia is the largest producers of palm oil. Along with the increasing demand for renewable energy source, palm oil will turn to be a very important commodity in the future. The palm oil industry will gain more value-added if they export the commodities in processed materials rather than raw materials. On the other hands palm oil industry more likely to export raw material, because there’s no incentives for them to export processed materials. Therefore, to give an incentive to palm oil industry, the government of Indonesia should give fiscal incentives to encourage palm oil industry to produce processed materials. The purpose of this study is to identify the appropriate fiscal policy to palm oil industry and to estimate the economic impact due to the implementation of fiscal incentives policy. The methodology used in this research is analysis using Social Accounting Matrix (SAM that can give an overview the impact of policy implementation to factors of production, an institution such as government and household, and other sectors including palm oil sectors itself. The result of this study that is the proposed fiscal policy in palm oil industry was fiscal incentives in the form of VAT exemption. Economic impact analysis that came from SAM indicates that implementation of the policy has an overall positive impact to factors of production, institution and sector.

  19. External Mechanical Work and Pendular Energy Transduction of Overground and Treadmill Walking in Adolescents with Unilateral Cerebral Palsy.

    Science.gov (United States)

    Zollinger, Marie; Degache, Francis; Currat, Gabriel; Pochon, Ludmila; Peyrot, Nicolas; Newman, Christopher J; Malatesta, Davide

    2016-01-01

    Motor impairments affect functional abilities and gait in children and adolescents with cerebral palsy (CP). Improving their walking is an essential objective of treatment, and the use of a treadmill for gait analysis and training could offer several advantages in adolescents with CP. However, there is a controversy regarding the similarity between treadmill and overground walking both for gait analysis and training in children and adolescents. The aim of this study was to compare the external mechanical work and pendular energy transduction of these two types of gait modalities at standard and preferred walking speeds in adolescents with unilateral cerebral palsy (UCP) and typically developing (TD) adolescents matched on age, height and body mass. Spatiotemporal parameters, external mechanical work and pendular energy transduction of walking were computed using two inertial sensors equipped with a triaxial accelerometer and gyroscope and compared in 10 UCP (14.2 ± 1.7 year) and 10 TD (14.1 ± 1.9 year) adolescents during treadmill and overground walking at standard and preferred speeds. The treadmill induced almost identical mechanical changes to overground walking in TD adolescents and those with UCP, with the exception of potential and kinetic vertical and lateral mechanical works, which are both significantly increased in the overground-treadmill transition only in UCP (P < 0.05). Adolescents with UCP have a reduced adaptive capacity in absorbing and decelerating the speed created by a treadmill (i.e., dynamic stability) compared to TD adolescents. This may have an important implication in rehabilitation programs that assess and train gait by using a treadmill in adolescents with UCP.

  20. External mechanical work and pendular energy transduction of overground and treadmill walking in adolescents with unilateral cerebral palsy

    Directory of Open Access Journals (Sweden)

    Marie eZollinger

    2016-04-01

    Full Text Available Purpose. Motor impairments affect functional abilities and gait in children and adolescents with cerebral palsy (CP. Improving their walking is an essential objective of treatment, and the use of a treadmill for gait analysis and training could offer several advantages in adolescents with CP. However, there is a controversy regarding the similarity between treadmill and overground walking both for gait analysis and training in children and adolescents. The aim of this study was to compare the external mechanical work and pendular energy transduction of these two types of gait modalities at standard and preferred walking speeds in adolescents with unilateral cerebral palsy (UCP and typically developing (TD adolescents matched on age, height and body mass. Methods. Spatiotemporal parameters, external mechanical work and pendular energy transduction of walking were computed using two inertial sensors equipped with a triaxial accelerometer and gyroscope and compared in 10 UCP (14.2 ± 1.7 yr and 10 TD (14.1 ± 1.9 yr adolescents during treadmill and overground walking at standard and preferred speeds. Results. The treadmill induced almost identical mechanical changes to overground walking in TD adolescents and those with UCP, with the exception of potential and kinetic vertical and lateral mechanical works, which are both significantly increased in the overground-treadmill transition only in UCP (P<0.05. Conclusions. Adolescents with UCP have a reduced adaptive capacity in absorbing and decelerating the speed created by a treadmill (i.e., dynamic stability compared to TD adolescents. This may have an important implication in rehabilitation programs that assess and train gait by using a treadmill in adolescents with UCP.