WorldWideScience

Sample records for exploiting interfacial water

  1. Exploiting interfacial water properties for desalination and purification applications.

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Hongwu (Los Alamos National Laboratory, Los Alamos, NM); Varma, Sameer; Nyman, May Devan; Alam, Todd Michael; Thuermer, Konrad; Holland, Gregory P.; Leung, Kevin; Liu, Nanguo (University of New Mexico Albuquerque, NM); Xomeritakis, George K. (University of New Mexico Albuquerque, NM); Frankamp, Benjamin L.; Siepmann, J. Ilja (University of Minnesota, Minneapolis, MN); Cygan, Randall Timothy; Hartl, Monika A. (Los Alamos National Laboratory, Los Alamos, NM); Travesset, Alex (Iowa State University, Ames, IA); Anderson, Joshua A. (Iowa State University, Ames, IA); Huber, Dale L.; Kissel, David J. (University of New Mexico Albuquerque, NM); Bunker, Bruce Conrad; Lorenz, Christian Douglas; Major, Ryan C. (University of Minnesota, Minneapolis, MN); McGrath, Matthew J. (University of Minnesota, Minneapolis, MN); Farrow, Darcie; Cecchi, Joseph L. (University of New Mexico Albuquerque, NM); van Swol, Frank B.; Singh, Seema; Rempe, Susan B.; Brinker, C. Jeffrey; Clawson, Jacalyn S.; Feibelman, Peter Julian; Houston, Jack E.; Crozier, Paul Stewart; Criscenti, Louise Jacqueline; Chen, Zhu (University of New Mexico Albuquerque, NM); Zhu, Xiaoyang (University of Minnesota, Minneapolis, MN); Dunphy, Darren Robert (University of New Mexico Albuquerque, NM); Orendorff, Christopher J.; Pless, Jason D.; Daemen, Luke L. (Los Alamos National Laboratory, Los Alamos, NM); Gerung, Henry (University of New Mexico Albuquerque, NM); Ockwig, Nathan W.; Nenoff, Tina Maria; Jiang, Ying-Bing; Stevens, Mark Jackson

    2008-09-01

    A molecular-scale interpretation of interfacial processes is often downplayed in the analysis of traditional water treatment methods. However, such an approach is critical for the development of enhanced performance in traditional desalination and water treatments. Water confined between surfaces, within channels, or in pores is ubiquitous in technology and nature. Its physical and chemical properties in such environments are unpredictably different from bulk water. As a result, advances in water desalination and purification methods may be accomplished through an improved analysis of water behavior in these challenging environments using state-of-the-art microscopy, spectroscopy, experimental, and computational methods.

  2. Frontiers of interfacial water research :workshop report.

    Energy Technology Data Exchange (ETDEWEB)

    Cygan, Randall Timothy; Greathouse, Jeffery A.

    2005-10-01

    Water is the critical natural resource of the new century. Significant improvements in traditional water treatment processes require novel approaches based on a fundamental understanding of nanoscale and atomic interactions at interfaces between aqueous solution and materials. To better understand these critical issues and to promote an open dialog among leading international experts in water-related specialties, Sandia National Laboratories sponsored a workshop on April 24-26, 2005 in Santa Fe, New Mexico. The ''Frontiers of Interfacial Water Research Workshop'' provided attendees with a critical review of water technologies and emphasized the new advances in surface and interfacial microscopy, spectroscopy, diffraction, and computer simulation needed for the development of new materials for water treatment.

  3. Viscosity of interfacial water regulates ice nucleation

    Energy Technology Data Exchange (ETDEWEB)

    Li, Kaiyong; Chen, Jing; Zhang, Qiaolan; Zhang, Yifan [Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Xu, Shun; Zhou, Xin [School of Physics, University of Chinese Academy of Sciences, Beijing 100049 (China); Cui, Dapeng; Wang, Jianjun, E-mail: wangj220@iccas.ac.cn; Song, Yanlin [Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China)

    2014-03-10

    Ice formation on solid surfaces is an important phenomenon in many fields, such as cloud formation and atmospheric icing, and a key factor for applications in preventing freezing. Here, we report temperature-dependent nucleation rates of ice for hydrophilic and hydrophobic surfaces. The results show that hydrophilic surface presents a lower ice nucleation rate. We develop a strategy to extract the thermodynamic parameters, J{sub 0} and Γ, in the context of classical nucleation theory. From the extracted J{sub 0} and Γ, we reveal the dominant role played by interfacial water. The results provide an insight into freezing mechanism on solid surfaces.

  4. Protein packing defects "heat up" interfacial water.

    Science.gov (United States)

    Sierra, María Belén; Accordino, Sebastián R; Rodriguez-Fris, J Ariel; Morini, Marcela A; Appignanesi, Gustavo A; Fernández Stigliano, Ariel

    2013-06-01

    Ligands must displace water molecules from their corresponding protein surface binding site during association. Thus, protein binding sites are expected to be surrounded by non-tightly-bound, easily removable water molecules. In turn, the existence of packing defects at protein binding sites has been also established. At such structural motifs, named dehydrons, the protein backbone is exposed to the solvent since the intramolecular interactions are incompletely wrapped by non-polar groups. Hence, dehydrons are sticky since they depend on additional intermolecular wrapping in order to properly protect the structure from water attack. Thus, a picture of protein binding is emerging wherein binding sites should be both dehydrons rich and surrounded by easily removable water. In this work we shall indeed confirm such a link between structure and dynamics by showing the existence of a firm correlation between the degree of underwrapping of the protein chain and the mobility of the corresponding hydration water molecules. In other words, we shall show that protein packing defects promote their local dehydration, thus producing a region of "hot" interfacial water which might be easily removed by a ligand upon association.

  5. Interfacial characteristics of petroleum bitumens in contact with acid water

    Energy Technology Data Exchange (ETDEWEB)

    Salou, M.; Siffert, B.; Jada, A. [Institut de Chimie des Surfaces et Interfaces, Mulhouse (France)

    1998-03-01

    The chemical and interfacial properties of two bitumens were compared. The chemical properties were characterized by determining the asphaltene and resin contents of the bitumens. The interfacial properties were studied by wettability measurements and by determining the zeta potential of bitumen dispersions in acid water, with and without maturation of asphaltene dispersions in acid water and of bitumen dispersions in acid water containing asphaltenes. The study of the influence of the maturation at 80{degree}C for 7 h and of the addition of asphaltenes on the stability of the bitumen dispersion showed that the evolution of the interfacial properties of the bitumen depends on the resin content of the bitumen. Short communication. 15 refs., 1 figs., 2 tabs.

  6. Interfacial thermodynamics of water and six other liquid solvents.

    Science.gov (United States)

    Pascal, Tod A; Goddard, William A

    2014-06-05

    We examine the thermodynamics of the liquid-vapor interface by direct calculation of the surface entropy, enthalpy, and free energy from extensive molecular dynamics simulations using the two-phase thermodynamics (2PT) method. Results for water, acetonitrile, cyclohexane, dimethyl sulfoxide, hexanol, N-methyl acetamide, and toluene are presented. We validate our approach by predicting the interfacial surface tensions (IFT--excess surface free energy per unit area) in excellent agreement with the mechanical calculations using Kirkwood-Buff theory. Additionally, we evaluate the temperature dependence of the IFT of water as described by the TIP4P/2005, SPC/Ew, TIP3P, and mW classical water models. We find that the TIP4P/2005 and SPC/Ew water models do a reasonable job of describing the interfacial thermodynamics; however, the TIP3P and mW are quite poor. We find that the underprediction of the experimental IFT at 298 K by these water models results from understructured surface molecules whose binding energies are too weak. Finally, we performed depth profiles of the interfacial thermodynamics which revealed long tails that extend far into what would be considered bulk from standard Gibbs theory. In fact, we find a nonmonotonic interfacial free energy profile for water, a unique feature that could have important consequences for the absorption of ions and other small molecules.

  7. Interfacial behavior of alkaline protease at the air-water and oil-water interfaces

    Science.gov (United States)

    Zhang, Jian; Li, Yanyan; Wang, Jing; Zhang, Yue

    2018-03-01

    The interfacial behavior of alkaline protease at the air-water and n-hexane-water interfaces was investigated using interfacial tension, dilatational rheology and dynamic light scattering. Additionally, different adsorption models which are Langmuir, Frumkin, Reorientation-A and Reorientation-R were used to fitting the data of equilibrium interfacial tension for further understanding the interfacial behavior of alkaline protease. Data fitting of the equilibrium interfacial tension was achieved by IsoFit software. The results show that the molecules arrangement of the alkaline protease at the n-hexane-water interface is more tightly than at the air-water interface. The data were further analyzed to indicate that the hydrophobic chains of alkaline protease penetrate into oil phase deeper than the air phase. Also data indicate that the electrostatic interactions and hydrophobic interactions at the n-hexane-water interface are stronger than at the air-water interface within molecules of the alkaline protease. Based on comprehensive analysis of the adsorption kinetics and interfacial rheological properties, interfacial structures mechanism of alkaline protease at n-hexane-water and air-water interfaces was proposed.

  8. Effect of Local and General Anesthetics on Interfacial Water.

    Directory of Open Access Journals (Sweden)

    Nenad Kundacina

    Full Text Available Water undergoes structural change as it interfaces with hydrophilic surfaces, including the many hydrophilic surfaces within the cell. This interfacial water has become known as "Exclusion Zone (EZ water" or "fourth-phase water" [1].We tested the hypothesis that anesthetics diminish the amount of EZ water, and that this change may correlate with functional changes in anesthesia. By using the local anesthetics Lidocaine and Bupivacaine as well as a general inhalational anesthetic, Isoflurane, we tracked the EZ size as these anesthetics were introduced.All three anesthetics diminished EZ size in a concentration-dependent manner at concentrations of 0.18 mM and greater for Bupivacaine, 0.85 mM and greater for Lidocaine, and 0.2% for Isoflurane. At extremely low (micromolar concentrations, however, all three anesthetics increased EZ size.The sharp increase of EZ size associated with micromolar anesthetic concentrations follows a similar pattern to induction of general anesthesia, from the excitation stage (Stage II to the depression and overdose stages of surgical anesthesia (Stages III and IV. The results are consistent with the hypothesis that anesthetics may act on water, a fundamental organizational component common to all cells.

  9. Blind Prediction of Interfacial Water Positions in CAPRI

    Science.gov (United States)

    Moal, Iain H.; Bates, Paul A.; Kastritis, Panagiotis L.; Melquiond, Adrien S.J.; Karaca, Ezgi; Schmitz, Christophe; van Dijk, Marc; Bonvin, Alexandre M.J.J.; Eisenstein, Miriam; Jiménez-García, Brian; Grosdidier, Solène; Solernou, Albert; Pérez-Cano, Laura; Pallara, Chiara; Fernández-Recio, Juan; Xu, Jianqing; Muthu, Pravin; Kilambi, Krishna Praneeth; Gray, Jeffrey J.; Grudinin, Sergei; Derevyanko, Georgy; Mitchell, Julie C.; Wieting, John; Kanamori, Eiji; Tsuchiya, Yuko; Murakami, Yoichi; Sarmiento, Joy; Standley, Daron M.; Shirota, Matsuyuki; Kinoshita, Kengo; Nakamura, Haruki; Chavent, Matthieu; Ritchie, David W.; Park, Hahnbeom; Ko, Junsu; Lee, Hasup; Seok, Chaok; Shen, Yang; Kozakov, Dima; Vajda, Sandor; Kundrotas, Petras J.; Vakser, Ilya A.; Pierce, Brian G.; Hwang, Howook; Vreven, Thom; Weng, Zhiping; Buch, Idit; Farkash, Efrat; Wolfson, Haim J.; Zacharias, Martin; Qin, Sanbo; Zhou, Huan-Xiang; Huang, Shen-You; Zou, Xiaoqin; Wojdyla, Justyna A.; Kleanthous, Colin; Wodak, Shoshana J.

    2015-01-01

    We report the first assessment of blind predictions of water positions at protein-protein interfaces, performed as part of the CAPRI (Critical Assessment of Predicted Interactions) community-wide experiment. Groups submitting docking predictions for the complex of the DNase domain of colicin E2 and Im2 immunity protein (CAPRI target 47), were invited to predict the positions of interfacial water molecules using the method of their choice. The predictions – 20 groups submitted a total of 195 models – were assessed by measuring the recall fraction of water-mediated protein contacts. Of the 176 high or medium quality docking models – a very good docking performance per se – only 44% had a recall fraction above 0.3, and a mere 6% above 0.5. The actual water positions were in general predicted to an accuracy level no better than 1.5 Å, and even in good models about half of the contacts represented false positives. This notwithstanding, three hotspot interface water positions were quite well predicted, and so was one of the water positions that is believed to stabilize the loop that confers specificity in these complexes. Overall the best interface water predictions was achieved by groups that also produced high quality docking models, indicating that accurate modelling of the protein portion is a determinant factor. The use of established molecular mechanics force fields, coupled to sampling and optimization procedures also seemed to confer an advantage. Insights gained from this analysis should help improve the prediction of protein-water interactions and their role in stabilizing protein complexes. PMID:24155158

  10. Interfacial Interactions of CO2-Water-Bentheimer Sandstone System - Dissolution and Contact Angle

    NARCIS (Netherlands)

    Shojaikaveh, N.; Rudolph, E.S.J.; Rossen, W.R.; Wolf, K-H.A.A.

    2014-01-01

    CO2 storage in deep saline aquifers and depleted gas reservoirs is largely controlled by interfacial phenomena among fluid phases and rock pore spaces. Reduction of the interfacial tension may result in the mobilization of connate water (capillary trapping). In addition, dissolving CO2 in formation

  11. Force-field dependence on the interfacial structure of oil-water interfaces

    Science.gov (United States)

    Bresme, Fernando; Chacón, Enrique; Tarazona, Pedro

    2010-07-01

    We investigate the performance of different force-fields for alkanes, united (TraPPE) and all atom (OPLS-AA) models, and water (SPC/E and TIP4P-2005), in the prediction of the interfacial structure of alkane (n-octane, and n-dodecane)-water interfaces. We report an extensive comparison of the interfacial thermodynamic properties as well as the interfacial structure (translational and orientational). We use the recently introduced intrinsic sampling method, which removes the averaging effect of the interfacial capillary waves and provides a clear view of the interface structure. The alkane interfacial structure is sensitive to the environment, i.e. alkane-vapour or alkane-water interfaces, showing a stronger structure when it is in contact with the water phase. We find that this structure is fairly independent of the level of detail, full or united atom, employed to describe the alkane phase. The water surface properties show a small dependence on the water model. The dipole moment of the SPC/E model shows asymmetric fluctuations, with a tendency to point both towards the alkane and water phases. On the other hand the dipole moment of the TIP4P-2005 model shows a tendency to point towards the water phase only. Analysis of the intrinsic electrostatic field indicates that the surface water potential is confined to an interfacial region of about 8 Å. Overall we find that the intrinsic structure of alkane-water interfaces is a robust interfacial property, which is independent of the details of the force-field employed. Hence, it should provide a good reference to interpret experimental data.

  12. Structural and dynamic heterogeneity of interfacial water on chemically modified polymer surfaces

    Science.gov (United States)

    Bekele, Selemon; Tsige, Mesfin

    Using molecular dynamics (MD) simulations, we investigate the structural and dynamical properties of water molecules in a slab of water in contact with atactic polystyrene surfaces of varying polarity. We find that the dynamics of water molecules in the interfacial region slows down with increasing polarity of the polystyrene surface. In addition, the interfacial water molecules exhibit structural and dynamic heterogeneity with respect to diffusion, hydrogen bond distribution and relaxation of the hydrogen bond network. The results obtained enhance our understanding of water structure and dynamics at the polymer/water interface with important implications for such desired functional properties as lubrication, adhesion and friction. Interfacial properties of water at hydrophobic and hydrophilic SAM (Self Assembled Monolayers) surfaces will also be presented for comparison. This work was supported by NSF Grant DMR1410290.

  13. Are nanometric films of liquid undercooled interfacial water bio-relevant?

    Science.gov (United States)

    Möhlmann, Diedrich T F

    2009-06-01

    It is known that life processes below the melting point temperature can actively evolve and establish in micrometer-sized (and larger) veins and structures in ice and permafrost soil, filled with unfrozen water. Thermodynamic arguments and experimental results indicate the existence of much smaller nanometer sized thin films of undercooled liquid interfacial (ULI) water on surfaces of micrometer sized and larger mineral particles and microbes in icy environments far below the melting point temperature. This liquid interfacial water can be described in terms of a freezing point depression, which is due to the interfacial pressure of van der Waals forces. The physics behind the possibly also life supporting capability of nanometric films of undercooled liquid interfacial water, which also can "mantle" the surfaces of the much larger and micrometer-sized microbes, is discussed. As described, biological processes do not necessarily have to proceed in the "bulk" of the thin interfacial water, as in "vinical" water and in the micrometer sized veins e.g., but they can be supported or are even made possible already by covering thin mantles of liquid interfacial water. These can provide liquid water for metabolic processes and act as carrier for the necessary transport of nutrients and waste. ULI water supports two different and possibly biologically relevant transport processes: 2D molecular diffusion in the interfacial film, and flow-like due to regelation. ULI-water, which is "lost" by transport into microbes, e.g., will be refilled from the neighbouring ice. In this way, the nanometric liquid environment of microbes in ULI-water is comparable to that of microbes in bulk water. Another probably also biologically relevant property of ULI is, depending on the hydrophobic or hydrophilic character of the surfaces, that it is of lower density (LDL) or higher density (HDL) than bulk water. Furthermore, capillary effects and ions in ULI-water solutions can support, enhance, and

  14. Measuring Air-water Interfacial Area for Soils Using the Mass Balance Surfactant-tracer Method

    Science.gov (United States)

    Araujo, Juliana B.; Mainhagu, Jon; Brusseau, Mark L.

    2015-01-01

    There are several methods for conducting interfacial partitioning tracer tests to measure air-water interfacial area in porous media. One such approach is the mass balance surfactant tracer method. An advantage of the mass-balance method compared to other tracer-based methods is that a single test can produce multiple interfacial area measurements over a wide range of water saturations. The mass-balance method has been used to date only for glass beads or treated quartz sand. The purpose of this research is to investigate the effectiveness and implementability of the mass-balance method for application to more complex porous media. The results indicate that interfacial areas measured with the mass-balance method are consistent with values obtained with the miscible-displacement method. This includes results for a soil, for which solid-phase adsorption was a significant component of total tracer retention. PMID:25950136

  15. Measuring air-water interfacial area for soils using the mass balance surfactant-tracer method.

    Science.gov (United States)

    Araujo, Juliana B; Mainhagu, Jon; Brusseau, Mark L

    2015-09-01

    There are several methods for conducting interfacial partitioning tracer tests to measure air-water interfacial area in porous media. One such approach is the mass balance surfactant tracer method. An advantage of the mass-balance method compared to other tracer-based methods is that a single test can produce multiple interfacial area measurements over a wide range of water saturations. The mass-balance method has been used to date only for glass beads or treated quartz sand. The purpose of this research is to investigate the effectiveness and implementability of the mass-balance method for application to more complex porous media. The results indicate that interfacial areas measured with the mass-balance method are consistent with values obtained with the miscible-displacement method. This includes results for a soil, for which solid-phase adsorption was a significant component of total tracer retention. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Structures and ultrafast dynamics of interfacial water assemblies on smooth hydrophobic surfaces

    Science.gov (United States)

    Yang, Ding-Shyue; He, Xing

    2017-09-01

    Using time-averaged and ultrafast electron diffraction, structures and ultrafast dynamics of interfacial water assemblies on smooth hydrophobic surfaces are reported. The lack of hydrophilic interaction and topographical template effect from the support surface leads to the formation of small, mostly randomly-oriented, ice crystallites with the cubic structure. Dynamically, following the substrate photoexcitation, interfacial water assemblies undergo four stages of changes-ultrafast melting, nonequilibrium isotropic phase transformation, annealing, and restructuring-which are closely correlated with the substrate dynamics. The connectivity and cooperative nature of the hydrogen-bonded network is considered crucial for water assemblies to withstand large structural motions without sublimation on ultrashort times.

  17. Interfacial behavior of water droplet on micro-nano structured surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Ho Jae; Yu, Dong In; Park, Hyun Sun; Moriyama, Kiyofumi [POSTECH, Pohang (Korea, Republic of); Kim, Moo Hwan [Korea Institute of Nuclear Safety, Deajeon (Korea, Republic of); Ahn, Ho Sun [Division of Mechanical System Engineering, Incheon National University, Incheon (Korea, Republic of); Kim, Dong Eok [Dept. of Mechanical Engineering, Kyungpook National University, Daegu (Korea, Republic of)

    2015-03-15

    Recently, surfaces with micro and nano structures are the focus of various research and engineering fields to enhance wetting characteristics of the surfaces. Hydrophilic surfaces with hierarchical structures are generally characterized by the interfacial behavior of water droplets. In this study, the interfacial behavior of water droplets is experimentally investigated considering the scale of structures. Using the dry etching and conventional lithography method, quantitative hierarchical structured surfaces are developed. The behavior of the liquid-vapor interface on the test sections is visualized using an automatic goniometer and a high-speed camera. On the basis of the visualized data, the interfacial behavior of water droplets is intensively investigated according to surface geometrical characteristics.

  18. Interfacial nanobubbles produced by long-time preserved cold water

    Science.gov (United States)

    Zhou, Li-Min; Wang, Shuo; Qiu, Jie; Wang, Lei; Wang, Xing-Ya; Li, Bin; Zhang, Li-Juan; Hu, Jun

    2017-09-01

    Not Available Project supported by the Key Laboratory of Interfacial Physics and Technology, Chinese Academy of Sciences, the Open Research Project of the Large Scientific Facility of the Chinese Academy of Sciences, the National Natural Science Foundation of China (Grant Nos. 11079050, 11290165, 11305252, 11575281, and U1532260), the National Key Basic Research Program of China (Grant Nos. 2012CB825705 and 2013CB932801), the National Natural Science Foundation for Outstanding Young Scientists, China (Grant No. 11225527), the Shanghai Academic Leadership Program, China (Grant No. 13XD1404400), and the Program of the Chinese Academy of Sciences (Grant Nos. KJCX2-EW-W09 and QYZDJ-SSW-SLH019)

  19. Subcritical Water Induced Complexation of Soy Protein and Rutin: Improved Interfacial Properties and Emulsion Stability.

    Science.gov (United States)

    Chen, Xiao-Wei; Wang, Jin-Mei; Yang, Xiao-Quan; Qi, Jun-Ru; Hou, Jun-Jie

    2016-09-01

    Rutin is a common dietary flavonoid with important antioxidant and pharmacological activities. However, its application in the food industry is limited mainly because of its poor water solubility. The subcritical water (SW) treatment provides an efficient technique to solubilize and achieve the enrichment of rutin in soy protein isolate (SPI) by inducing their complexation. The physicochemical, interfacial, and emulsifying properties of the complex were investigated and compared to the mixtures. SW treatment had much enhanced rutin-combined capacity of SPI than that of conventional method, ascribing to the well-contacted for higher water solubility of rutin with stronger collision-induced hydrophobic interactions. Compared to the mixtures of rutin with proteins, the complex exhibited an excellent surface activity and improved the physical and oxidative stability of its stabilized emulsions. This improving effect could be attributed to the targeted accumulation of rutin at the oil-water interface accompanied by the adsorption of SPI resulting in the thicker interfacial layer, as evidenced by higher interfacial protein and rutin concentrations. This study provides a novel strategy for the design and enrichment of nanovehicle providing water-insoluble hydrophobic polyphenols for interfacial delivery in food emulsified systems. © 2016 Institute of Food Technologists®

  20. Investigation of the interfacial properties of water-in-diluted-bitumen emulsions using micropipette techniques.

    Science.gov (United States)

    Tsamantakis, Christina; Masliyah, Jacob; Yeung, Anthony; Gentzis, Thomas

    2005-04-01

    The interfacial properties of water-in-diluted bitumen emulsions were studied using micropipette techniques. It was observed that, as bitumen concentration in the bulk phase (C0) increased, the interfacial tension on the water droplet surfaces decreased. In addition, there was a small effect on the interfacial tension when different solvent mixtures were used. Mixtures of toluene and heptane in different ratios were used as solvents for bitumen dilution. Crumpling of the interface was influenced by bitumen concentration and type of solvent. No crumpling was found for bitumen content less than 0.01% for all solvents used. Crumpling was observed at higher bitumen concentrations when deionized water (pH 5.4-5.6) was used. Setting "heptol[A]" to be the mixture of toluene and heptane, with the volume percent of toluene being A, the following were concluded. Crumpling disappeared at C0 > 1% and when heptol[100] was used, and also at C0 > 10% and when heptol[30] was used. Crumpling was strongly affected by the water pH. In the case of heptol[50], at a higher pH, the crumpling region that normally occurred at C0 > 0.01% disappeared. The micropipette technique proved to be useful in studying the interfacial properties of micrometer-sized emulsion drops.

  1. Communication: interfacial water structure revealed by ultrafast two-dimensional surface vibrational spectroscopy

    NARCIS (Netherlands)

    Zhang, Z.; Piatkowski, L.; Bakker, H.J.; Bonn, M.

    2011-01-01

    Knowledge of the interfacial water structure is essential for a basic understanding of the many environmental, technological, and biophysical systems in which aqueous interfaces appear. Using ultrafast two-dimensional surface-specific vibrational spectroscopy we show that the structure of heavy

  2. Interfacial tension between benzene and water in the presence of caprolactam

    NARCIS (Netherlands)

    Tuinier, R.; Krooshof, G.J.P.

    2012-01-01

    We studied the physical properties and the concentration profile of benzene + water + caprolactam mixtures near the fluid–fluid interface using self-consistent field (SCF) theory. This yields the interfacial tension which plays an important role in describing the stability of transient liquid

  3. Nanoscopic characterization of the water vapor-salt interfacial layer reveals a unique biphasic adsorption process

    Science.gov (United States)

    Yang, Liu; He, Jianfeng; Shen, Yi; Li, Xiaowei; Sun, Jielin; Czajkowsky, Daniel M.; Shao, Zhifeng

    2016-08-01

    Our quantitative understanding of water adsorption onto salt surfaces under ambient conditions is presently quite poor owing to the difficulties in directly characterizing this interfacial layer under these conditions. Here we determine the thickness of the interfacial layer on NaCl at different relative humidities (RH) based on a novel application of atomic force spectroscopy and capillary condensation theory. In particular, we take advantage of the microsecond-timescale of the capillary condensation process to directly resolve the magnitude of its contribution in the tip-sample interaction, from which the interfacial water thickness is determined. Further, to correlate this thickness with salt dissolution, we also measure surface conductance under similar conditions. We find that below 30% RH, there is essentially only the deposition of water molecules onto this surface, typical of conventional adsorption onto solid surfaces. However, above 30% RH, adsorption is simultaneous with the dissolution of ions, unlike conventional adsorption, leading to a rapid increase of surface conductance. Thus, water adsorption on NaCl is an unconventional biphasic process in which the interfacial layer not only exhibits quantitative differences in thickness but also qualitative differences in composition.

  4. Calculation of Interfacial Tensions of Hydrocarbon-water Systems under Reservoir Conditions

    DEFF Research Database (Denmark)

    Zuo, You-Xiang; Stenby, Erling Halfdan

    1998-01-01

    Assuming that the number densities of each component in a mixture are linearly distributed across the interface between the coexisting vapor-liquid or liquid-liquid phases, we developed in this research work a linear-gradient-theory (LGT) model for computing the interfacial tension of hydrocarbon......-water mixtures on the basis of the SRK equation of state. With this model, it is unnecessary to solve the time-consuming density-profile equations of the gradient-theory model. In addition, a correlation was developed for representing the effect of electrolytes on the interfacial tension of hydrocarbon...

  5. Interfacial tension in cooled heterogeneous liquid acetonitrile-ethyl acetate-isopropanol-water-phenol systems

    Science.gov (United States)

    Rudakov, O. B.; Khorokhordina, E. A.; Preobrazhenskii, M. A.

    2017-04-01

    It is found that the tension at the interfacial boundary of liquid phases formed by mixtures of acetonitrile-ethyl acetate-isopropanol (85 : 15 : 0 and 80 : 15 : 5 vol/vol/vol %) and water at 263 K falls exponentially as the concentration of phenols grows within 0-1 mg/mL. It is shown that the relatively low values of interfacial tension (11-32 mN/m) observed in cooled heterogeneous systems promote the redistribution of phenols between two liquid phases.

  6. Interfacial structures of confined air-water two-phase bubbly flow

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S.; Ishii, M.; Wu, Q.; McCreary, D.; Beus, S.G.

    2000-08-01

    The interfacial structure of the two-phase flows is of great importance in view of theoretical modeling and practical applications. In the present study, the focus is made on obtaining detailed local two-phase parameters in the air-water bubbly flow in a rectangular vertical duct using the double-sensor conductivity probe. The characteristic wall-peak is observed in the profiles of the interracial area concentration and the void fraction. The development of the interfacial area concentration along the axial direction of the flow is studied in view of the interfacial area transport and bubble interactions. The experimental data is compared with the drift flux model with C{sub 0} = 1.35.

  7. Metal-Organic Framework-Stabilized CO2/Water Interfacial Route for Photocatalytic CO2Conversion.

    Science.gov (United States)

    Luo, Tian; Zhang, Jianling; Li, Wei; He, Zhenhong; Sun, Xiaofu; Shi, Jinbiao; Shao, Dan; Zhang, Bingxing; Tan, Xiuniang; Han, Buxing

    2017-11-29

    Here, we propose a CO 2 /water interfacial route for photocatalytic CO 2 conversion by utilizing a metal-organic framework (MOF) as both an emulsifier and a catalyst. The CO 2 reduction occurring at the CO 2 /water interface produces formate with remarkably enhanced efficiency as compared with that in conventional solvent. The route is efficient, facile, adjustable, and environmentally benign, which is applicable for the CO 2 transformation photocatalyzed by different kinds of MOFs.

  8. Interfacial water molecules at biological membranes: Structural features and role for lateral proton diffusion.

    Science.gov (United States)

    Nguyen, Trung Hai; Zhang, Chao; Weichselbaum, Ewald; Knyazev, Denis G; Pohl, Peter; Carloni, Paolo

    2018-01-01

    Proton transport at water/membrane interfaces plays a fundamental role for a myriad of bioenergetic processes. Here we have performed ab initio molecular dynamics simulations of proton transfer along two phosphatidylcholine bilayers. As found in previous theoretical studies, the excess proton is preferably located at the water/membrane interface. Further, our simulations indicate that it interacts not only with phosphate head groups, but also with water molecules at the interfaces. Interfacial water molecules turn out to be oriented relative to the lipid bilayers, consistently with experimental evidence. Hence, the specific water-proton interaction may help explain the proton mobility experimentally observed at the membrane interface.

  9. Experimental measurement of air-water interfacial area during gravity drainage and secondary imbibition in porous media

    Science.gov (United States)

    Schaefer, C. E.; Dicarlo, D. A.; Blunt, M. J.

    2000-04-01

    A new experimental method was developed to determine air-water interfacial area as a function of capillary pressure and water saturation in unsaturated porous media. The surfactant sodium dodecyl benzene sulfonate (SDBS) was used in equilibrium column adsorption experiments to estimate air-water interfacial area for water saturations (milliliter water per milliliter void) ranging from 0.05 to 1.0 and pressures ranging from 0 to 20 cm of water. A comparison was made between columns which were equilibrated under gravity drainage versus columns equilibrated under secondary imbibition. Gravity drainage experiments showed the air-water interfacial area decreased linearly with saturation, while imbibition experiments showed a more complex nonmonotonic relation to the saturation. The interfacial area data are then compared with existing network models.

  10. Numerical Modeling of Surfactant-Induced Flow During Laboratory Measurement of Air-Water Interfacial Area

    Science.gov (United States)

    Henry, E. J.; Costanza-Robinson, M. S.

    2010-12-01

    An understanding of the relationship between air-water interfacial area (AI) and moisture saturation (SW) is necessary for the accurate prediction of the subsurface transport of solutes that partition to the interface or are readily transferred across the interface. Interfacial areas are commonly measured in a laboratory soil column using the aqueous interfacial-partitioning tracer methodology (IPT), in which AI is calculated based on the ratio of travel times of interfacial and non-reactive tracers. IPTs are conducted in uniformly-wetted soil columns and therefore, allow the determination of AI at a particular value of SW. The interfacial tracers used are typically surfactants, such as sodium dodecyl benzene sulfonate (SDBS), which are reversibly retained the air-water interface. At the SDBS concentrations often used, the aqueous surface tension of the interfacial tracer solution is approximately 30% lower than that of the non-reactive tracer solution. Because capillary pressure gradients caused by surfactant-induced surface tension gradients can induce unsaturated flow, we used numerical modeling to examine the potential for perturbations in unsaturated flow, and thus non-uniform distributions in SW, to occur during IPT tests. We used HYDRUS 1D, modified to include concentration-dependent surfactant effects on capillary pressure, in order to simulate a typical IPT experimental configuration in which SDBS was the interfacial tracer. Linear partitioning of the tracer to the air-water interface and sorption to the solid were included as SDBS retention mechanisms. The simulation results indicated that the surface tension changes caused by SDBS were sufficient to induce significant transient unsaturated flow, which was manifested as localized drainage and wetting as the SDBS passed through the column. Average SW in the column subsequently rebounded and reached a new steady-state flow condition once SDBS had displaced resident tracer-free water. The average SW at the

  11. Protruding interfacial OH groups and 'on-water' heterogeneous catalysis.

    Science.gov (United States)

    Jung, Yousung; Marcus, R A

    2010-07-21

    The key aspect of the remarkable organic catalysis that is observed to occur at the organic/water phase boundary, the so-called 'on-water' catalysis (Narayan et al 2005 Angew. Chem. 44 3275), was recently proposed to be the protruding OH groups of water molecules at the interface that interact with the transition state (TS) via hydrogen bonding and lower activation barriers (Jung and Marcus 2007 J. Am. Chem. Soc. 129 5492). In particular, the cycloaddition reaction of quadricyclane (Q) with dimethyl azodicarboxylate (DMAD) on-water was calculated to be more than 100,000 times more efficient in terms of rate constant than the neat reaction. In this paper, we review and consider a related reaction of Q with dimethyl acetylenedicarboxylate, where nitrogen, a good H-bond acceptor, in DMAD is replaced by carbon, a poor H-bond acceptor. A very low rate acceleration of acetylenedicarboxylate on-water relative to the neat reaction is obtained theoretically, as compared to DMAD on-water, due to the relatively low H-bonding ability of acetylenedicarboxylate with water at the TS relative to the reactants. We suggest that there may also be an 'intrinsic steric effect' or orientational advantage in the on-water catalysis in general, and both electronic and steric effects may be in operation for the smaller on-water catalysis for the cycloaddition reaction of quadricyclane and acetylenedicarboxylate. A preliminary quantum mechanical/molecular mechanical (QM/MM) simulation including 1264 water molecules for the on-water reaction of DMAD + Q also suggests that there are indeed approximately two-four more H-bonds between the TS and the dangling OH groups than between the reactants and the surface.

  12. Computer simulation study of water/hydrocarbon interfaces: Effects of hydrocarbon branching on interfacial properties

    Science.gov (United States)

    Chowdhary, Janamejaya; Ladanyi, Branka M.

    2009-06-01

    We review here the results of our molecular dynamics (MD) simulation study of water/hydrocarbon liquid/liquid interfaces. In order to examine the effects of chain length and branching on interfacial properties, we considered five different alkanes (n-pentane, 2-methyl pentane, 2,2,4-trimethyl pentane, 2-methyl heptane, and n-octane) as the hydrocarbon phase. We used a recently-proposed procedure to identify molecular surface sites and constructed intrinsic density profiles, in addition to the more familiar laboratory-frame profiles, in order to determine the effects of interface fluctuations on the structure and dynamics of the two phases. We found that interfacial properties of the aqueous phase are relatively insensitive to the molecular structure of the hydrocarbon, even though both branching and chain length have significant influence on the hydrocarbon interfacial properties. We found that translational and rotational mobilities of molecules of both phases are affected by the presence of the interface and that rotational relaxation of water molecules is significantly more anisotropic in the interfacial region than in the bulk.

  13. Interfacial water thickness at inorganic nanoconstructs and biomolecules: Size matters

    Energy Technology Data Exchange (ETDEWEB)

    Cardellini, Annalisa; Fasano, Matteo; Chiavazzo, Eliodoro; Asinari, Pietro, E-mail: pietro.asinari@polito.it

    2016-04-29

    Water molecules in the proximity of solid nanostructures influence both the overall properties of liquid and the structure and functionality of solid particles. The study of water dynamics at solid–liquid interfaces has strong implications in energy, environmental and biomedical fields. This article focuses on the hydration layer properties in the proximity of Carbon Nanotubes (CNTs) and biomolecules (proteins, polypeptides and amino acids). Here we show a quantitative relation between the solid surface extension and the characteristic length of water nanolayer (δ), which is confined at solid–liquid interfaces. Specifically, the size dependence is attributed to the limited superposition of nonbonded interactions in case of small molecules. These results may facilitate the design of novel energy or biomedical colloidal nanosuspensions, and a more fundamental understanding of biomolecular processes influenced by nanoscale water dynamics. - Highlights: • Properties of the water hydration layer are investigated. • New relation between extension of solid size and hydration layer established. • Possible impact on rational design of nanosuspensions.

  14. Interfacial structure and wetting properties of water droplets on graphene under a static electric field.

    Science.gov (United States)

    Ren, Hongru; Zhang, Leining; Li, Xiongying; Li, Yifan; Wu, Weikang; Li, Hui

    2015-09-28

    The behavior of water droplets located on graphene in the presence of various external electric fields (E-fields) is investigated using classical molecular dynamics (MD) simulations. We explore the effect of E-field on mass density distribution, water polarization as well as hydrogen bonds (H-bonds) to gain insight into the wetting properties of water droplets on graphene and their interfacial structure under uniform E-fields. The MD simulation results reveal that the equilibrium water droplets present a hemispherical, a conical and an ordered cylindrical shape with the increase of external E-field intensity. Accompanied by the shape variation of water droplets, the dipole orientation of water molecules experiences a remarkable change from a disordered state to an ordered state because of the polarization of water molecules induced by static E-field. The distinct two peaks in mass density and H-bond distribution profiles demonstrate that water has a layering structure in the interfacial region, which sensitively depends on the strong E-field (>0.8 V nm(-1)). In addition, when the external E-field is parallel to the substrate, the E-field would make the contact angle of the water droplets become small and increase its wettability. Our findings provide the possibility to control the structure and wetting properties of water on graphene by tuning the direction and intensity of external E-field which is of importance for relevant industrial processes on the solid surface.

  15. Blind prediction of interfacial water positions in CAPRI

    NARCIS (Netherlands)

    Lensink, Marc F; Moal, Iain H; Bates, Paul A; Kastritis, Panagiotis L; Melquiond, Adrien S J; Karaca, Ezgi; Schmitz, Christophe; van Dijk, Marc; Bonvin, Alexandre M J J; Eisenstein, Miriam; Jiménez-García, Brian; Grosdidier, Solène; Solernou, Albert; Pérez-Cano, Laura; Pallara, Chiara; Fernández-Recio, Juan; Xu, Jianqing; Muthu, Pravin; Praneeth Kilambi, Krishna; Gray, Jeffrey J; Grudinin, Sergei; Derevyanko, Georgy; Mitchell, Julie C; Wieting, John; Kanamori, Eiji; Tsuchiya, Yuko; Murakami, Yoichi; Sarmiento, Joy; Standley, Daron M; Shirota, Matsuyuki; Kinoshita, Kengo; Nakamura, Haruki; Chavent, Matthieu; Ritchie, David W; Park, Hahnbeom; Ko, Junsu; Lee, Hasup; Seok, Chaok; Shen, Yang; Kozakov, Dima; Vajda, Sandor; Kundrotas, Petras J; Vakser, Ilya A; Pierce, Brian G; Hwang, Howook; Vreven, Thom; Weng, Zhiping; Buch, Idit; Farkash, Efrat; Wolfson, Haim J; Zacharias, Martin; Qin, Sanbo; Zhou, Huan-Xiang; Huang, Shen-You; Zou, Xiaoqin; Wojdyla, Justyna A; Kleanthous, Colin; Wodak, Shoshana J

    We report the first assessment of blind predictions of water positions at protein-protein interfaces, performed as part of the critical assessment of predicted interactions (CAPRI) community-wide experiment. Groups submitting docking predictions for the complex of the DNase domain of colicin E2 and

  16. Interfacial wave behavior in oil-water channel flows: Prospects for a general understanding

    Energy Technology Data Exchange (ETDEWEB)

    McCready, M.J.; Uphold, D.D.; Gifford, K.A. [Univ. of Notre Dame, IN (United States)

    1997-12-31

    Oil-water pressure driven channel flow is examined as a model for general two-layer flows where interfacial disturbances are important. The goal is to develop sufficient understanding of this system so that the utility and limitations of linear and nonlinear theories can be known a priori. Experiments show that sometimes linear stability is useful at predicting the steady or dominant evolving waves. However in other situations there is no agreement between the linearly fastest growing wave and the spectral peak. An interesting preliminary result is that the bifurcation to interfacial waves is supercritical for all conditions that were studied for an oil-water channel flow, gas-liquid channel flow and two-liquid Couette flow. However, three different mechanisms are dominant for each of these three situations.

  17. Effect of surfactant headgroups on the oil/water interface: An interfacial tension measurement and simulation study

    Science.gov (United States)

    Xu, Jiafang; Zhang, Yang; Chen, Haixiang; Wang, Pan; Xie, Zhenhua; Yao, Yongji; Yan, Youguo; Zhang, Jun

    2013-11-01

    In the article, four anionic surfactants with different headgroups and same alkyl tail, sodium dodecyl sulfonate (SDSn), sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), and sodium dodecyl-di(oxyethylene) ether sulfate (AES), are adopted to investigate the influence of headgroup structure on oil-water interfacial tensions. The measured experimental results present that the capability of the four surfactants reducing interfacial tension follows the order of AES > SDBS > SDS > SDSn. Furthermore, molecular dynamic simulation (MD) is conducted to investigate the interfacial property of the four surfactants, and three parameters, interface formation energy, interfacial thickness, interaction between surfactant and water, are proposed to reveal the effecting mechanism of molecular structure on interfacial tension. And then, the polarity is studied by quantum mechanics calculation (QM) to investigate the interaction between headgroup and water molecule. The researched results indicate the addition of oxygen, benzene ring and oxyethyl group would enhance the polarity of surfactant, which induce the increase of interaction between headgroup and water molecule. The inferred interfacial tensions from MD and QM follow the order of AES > SDBS > SDS > SDSn, which is according with the experimental results. The researches explore the correlation between interfacial tensions and different headgroup structures, and these results maybe have some references for designing of high-efficient surfactant.

  18. Prediction of aliphatic and aromatic oil-water interfacial tension at temperatures >100 °C using COSMO-RS

    DEFF Research Database (Denmark)

    Andersson, Martin Peter; Eckert, F.; Reinisch, J M

    2017-01-01

    As a contribution to the 9th Industrial Fluid Property Simulation Challenge on predicting interfacial tension between water and a set of non-polar oils at temperatures up to 170 °C we have used our first-principles based model, which is based on density functional theory and uses COSMO-RS implicit...... solvent model thermodynamics. Our calculations predict that the oil-water interfacial tension starts to drop significantly for alkanes at temperatures above ∼100 °C, and the oil-water interfacial tension drops significantly with increased temperature already above ∼25 °C for aromatic oils. In the range...... is a good approximation. The agreement of our predictions with the experimental data was overall satisfying, apart from a significant difference in the temperature dependence of the dodecane-water interfacial tension. We provide results derived from other experimental measurements suggesting that the large...

  19. Interfacial phenomena at the compressed co2-water interface

    Directory of Open Access Journals (Sweden)

    B. Bharatwaj

    2006-06-01

    Full Text Available Compressed CO2 is considered to be a viable alternative to toxic volatile organic solvents with potential applications in areas including separation reactions, and materials formation processes. Thus an interest in CO2 stems from the fact that it is very inexpensive, has low toxicity, and is not a regulated. However, compressed CO2 has a zero dipole moment and weak van der Waals forces and thus is a poor solvent for both polar and most high molecular weight solutes, characteristics that severely restrict its applicability. In order to overcome this inherent inability, surfactant-stabilized organic and aqueous dispersions in CO2 have been proposed. This work will discuss fundamentals and recent advances in the design of amphiphiles for the novel CO2-water interface.

  20. Manipulating the Interfacial Energetics of n-type Silicon Photoanode for Efficient Water Oxidation.

    Science.gov (United States)

    Yao, Tingting; Chen, Ruotian; Li, Junjie; Han, Jingfeng; Qin, Wei; Wang, Hong; Shi, Jingying; Fan, Fengtao; Li, Can

    2016-10-07

    The photoanodes with heterojunction behavior could enable the development of solar energy conversion, but their performance largely suffers from the poor charge separation and transport process through the multiple interfacial energy levels involved. The question is how to efficiently manipulate these energy levels. Taking the n-Si Schottky photoanode as a prototype, the undesired donor-like interfacial defects and its adverse effects on charge transfer in n-Si/ITO photoanode are well recognized and diminished through the treatment on electronic energy level. The obtained n-Si/TiO x /ITO Schottky junction exhibits a highly efficient charge transport and a barrier height of 0.95 eV, which is close to the theoretical optimum for n-Si/ITO Schottky contact. Then, the holes extraction can be further facilitated through the variation of surface energy level, with the NiOOH coated ITO layer. This is confirmed by a 115% increase in surface photovoltage of the photoanodes. Eventually, an unprecedentedly low onset potential of 0.9 V (vs RHE) is realized for water oxidation among n-Si photoanodes. For the water oxidation reaction, the n-Si/TiO x /ITO/NiOOH photoanode presents a charge separation efficiency up to 100% and an injection efficiency greater than 90% at a wide voltage range. This work identifies the important role of interfacial energetics played in photoelectrochemical conversion.

  1. Study of interfacial area transport and sensitivity analysis for air-water bubbly flow

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S.; Sun, X.; Ishii, M.; Beus, S.G.

    2000-09-01

    The interfacial area transport equation applicable to the bubbly flow is presented. The model is evaluated against the data acquired by the state-of-the-art miniaturized double-sensor conductivity probe in an adiabatic air-water co-current vertical test loop under atmospheric pressure condition. In general, a good agreement, within the measurement error of plus/minus 10%, is observed for a wide range in the bubbly flow regime. The sensitivity analysis on the individual particle interaction mechanisms demonstrates the active interactions between the bubbles and highlights the mechanisms playing the dominant role in interfacial area transport. The analysis employing the drift flux model is also performed for the data acquired. Under the given flow conditions, the distribution parameter of 1.076 yields the best fit to the data.

  2. Exploiting water versus tolerating drought: water-use strategies of trees in a secondary successional tropical dry forest

    Science.gov (United States)

    Fernando Pineda-García; Horacio Paz; Frederick C. Meinzer; Guillermo Angeles; Guillermo Goldstein

    2015-01-01

    In seasonal plant communities where water availability changes dramatically both between and within seasons, understanding the mechanisms that enable plants to exploit water pulses and to survive drought periods is crucial. By measuring rates of physiological processes, we examined the trade-off between water exploitation and drought tolerance among seedlings of trees...

  3. Summary of the research methods of DNAPL-water interfacial area and DNAPL saturation in porous media

    Science.gov (United States)

    Li, M.; Wan, L.

    2016-12-01

    The dense non-aqueous phase liquid (DNAPL)-water interfacial area and DNAPL saturation are key factors in groundwater pollution remediation. The research methods of DNAPL-water interfacial area were summarized, including interfacial partitioning tracer tests, synchrotron X-ray microtomography and theoretical models, and the disparity of the study results with different methods was analyzed. The applications of DNAPL saturation measurement methods including tracer test method, light transmission visualization (LTV) and electrical resistivity tomography (ERT) were also summarized, especially the current applications of light transmission method in China. The partitioning tracer test, as an important method in the study of correlation between DNAPL-water interfacial areas and DNAPL saturation for porous media systems, should be given more attention in laboratory and field experiments.

  4. The potential for lithoautotrophic life on Mars: application to shallow interfacial water environments.

    Science.gov (United States)

    Jepsen, Steven M; Priscu, John C; Grimm, Robert E; Bullock, Mark A

    2007-04-01

    We developed a numerical model to assess the lithoautotrophic habitability of Mars based on metabolic energy, nutrients, water availability, and temperature. Available metabolic energy and nutrient sources were based on a laboratory-produced Mars-analog inorganic chemistry. For this specific reference chemistry, the most efficient lithoautotrophic microorganisms would use Fe(2+) as a primary metabolic electron donor and NO(3)(-) or gaseous O(2) as a terminal electron acceptor. In a closed model system, biomass production was limited by the electron donor Fe(2+) and metabolically required P, and typically amounted to approximately 800 pg of dry biomass/ml ( approximately 8,500 cells/ml). Continued growth requires propagation of microbes to new fecund environments, delivery of fresh pore fluid, or continued reaction with the host material. Within the shallow cryosphere--where oxygen can be accessed by microbes and microbes can be accessed by exploration-lithoautotrophs can function within as little as three monolayers of interfacial water formed either by adsorption from the atmosphere or in regions of ice stability where temperatures are within some tens of degrees of the ice melting point. For the selected reference host material (shergottite analog) and associated inorganic fluid chemistry, complete local reaction of the host material potentially yields a time-integrated biomass of approximately 0.1 mg of dry biomass/g of host material ( approximately 10(9) cells/g). Biomass could also be sustained where solutes can be delivered by advection (cryosuction) or diffusion in interfacial water; however, both of these processes are relatively inefficient. Lithoautotrophs in near-surface thin films of water, therefore, would optimize their metabolism by deriving energy and nutrients locally. Although the selected chemistry and associated model output indicate that lithoautotrophic microbial biomass could accrue within shallow interfacial water on Mars, it is likely that

  5. Effect of ionic strength on the interfacial viscoelasticity and stability of silk fibroin at the oil/water interface.

    Science.gov (United States)

    Tang, Xiaoxiao; Qiao, Xiuying; Miller, Reinhard; Sun, Kang

    2016-12-01

    The amphiphilic character and surface activity endows silk fibroin with the ability to reside at fluid interfaces and effectively stabilize emulsions. However, the influence of relevant factors and their actual effect on the interfacial viscoelasticity and stability of silk fibroin at the oil/water interface has received less attention. In the present study, the effect of ionic strength on the interfacial viscoelasticity, emulsification effectiveness and stability of silk fibroin at the oil/water interface was investigated in detail. A higher ion concentration facilitates greater adsorption, stronger molecular interaction and faster structure reorganization of silk fibroin at the oil/water interface, thus causing quicker interfacial saturation adsorption, greater interfacial strength and lower interfacial structural fracture on large deformation. However, the presence of concentrated ions screens the charges in silk fibroin molecules and the zeta potential decreases as a result of electrostatic screening and ion-binding effects, which may result in emulsion droplet coalescence and a decrease in emulsion stability. The positively-charged ions significantly affect the interfacial elasticity and stability of silk fibroin layers at the oil/water interface as a result of the strong electrostatic interactions between counter-ions and the negatively-charged groups of silk fibroin. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  6. Effect of Interfacial Polarization and Water Absorption on the Dielectric Properties of Epoxy-Nanocomposites

    Directory of Open Access Journals (Sweden)

    Philipp Marx

    2017-05-01

    Full Text Available Five types of nanofillers, namely, silica, surface-silylated silica, alumina, surface-silylated alumina, and boron nitride, were tested in this study. Nanocomposites composed of an epoxy/amine resin and one of the five types of nanoparticles were tested as dielectrics with a focus on (i the surface functionalization of the nanoparticles and (ii the water absorption by the materials. The dispersability of the nanoparticles in the resin correlated with the composition (OH content of their surfaces. The interfacial polarization of the thoroughly dried samples was found to increase at lowered frequencies and increased temperatures. The β relaxation, unlike the interfacial polarization, was not significantly increased at elevated temperatures (below the glass-transition temperature. Upon the absorption of water under ambient conditions, the interfacial polarization increased significantly, and the insulating properties decreased or even deteriorated. This effect was most pronounced in the nanocomposite containing silica, and occurred as well in the nanocomposites containing silylated silica or non-functionalized alumina. The alternating current (AC breakdown strength of all specimens was in the range of 30 to 35 kV·mm−1. In direct current (DC breakdown tests, the epoxy resin exhibited the lowest strength of 110 kV·mm−1; the nanocomposite containing surface-silylated alumina had a strength of 170 kV·mm−1. In summary, water absorption had the most relevant impact on the dielectric properties of nanocomposites containing nanoparticles, the surfaces of which interacted with the water molecules. Nanocomposites containing silylated alumina particles or boron nitride showed the best dielectric properties in this study.

  7. An experimental investigation of the interfacial condensation heat transfer in steam/water countercurrent stratified flow in a horizontal pipe

    Energy Technology Data Exchange (ETDEWEB)

    Chu, In Cheol; Yu, Seon Oh; Chun, Moon Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Kim, Byong Sup; Kim, Yang Seok; Kim, In Hwan; Lee, Sang Won [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    1998-12-31

    An interfacial condensation heat transfer phenomenon in a steam/water countercurrent stratified flow in a nearly horizontal pipe has been experimentally investigated. The present study has been focused on the measurement of the temperature and velocity distributions within the water layer. In particular, the water layer thickness used in the present work is large enough so that the turbulent mixing is limited and the thermal stratification is established. As a result, the thermal resistance of the water layer to the condensation heat transfer is increased significantly. An empirical correlation of the interfacial condensation heat transfer has been developed. The present correlation agrees with the data within {+-} 15%. 5 refs., 6 figs. (Author)

  8. Engineering interfacial silicon dioxide for improved metal-insulator-semiconductor silicon photoanode water splitting performance

    OpenAIRE

    Satterthwaite, Peter F.; Scheuermann, Andrew G.; Hurley, Paul K; Chidsey, Christopher E. D.; McIntyre, Paul C.

    2016-01-01

    Silicon photoanodes protected by atomic layer deposited (ALD) TiO2 show promise as components of water splitting devices that may enable the large-scale production of solar fuels and chemicals. Minimizing the resistance of the oxide corrosion protection layer is essential for fabricating efficient devices with good fill factor. Recent literature reports have shown that the interfacial SiO2 layer, interposed between the protective ALD-TiO2 and the Si anode, acts as a tunnel oxide that limits h...

  9. Review of Water Resource Exploitation and Landuse Pressure in ...

    African Journals Online (AJOL)

    In addition, changes in climate regime, due to increasing temperature and reduced rainfall conditions, contribute to the reduced water supply. ... methods and 4- application of modern innovative techniques of water storage such as Aquifer Storage and Recovery (ASR) in preference to surface water storage systems.

  10. Simulating gas-water relative permeabilities for nanoscale porous media with interfacial effects

    Directory of Open Access Journals (Sweden)

    Wang Jiulong

    2017-08-01

    Full Text Available This paper presents a theoretical method to simulate gas-water relative permeability for nanoscale porous media utilizing fractal theory. The comparison between the calculation results and experimental data was performed to validate the present model. The result shows that the gas-water relative permeability would be underestimated significantly without interfacial effects. The thinner the liquid film thickness, the greater the liquid-phase relative permeability. In addition, both liquid surface diffusion and gas diffusion coefficient can promote gas-liquid two-phase flow. Increase of liquid surface diffusion prefer to increase liquid-phase permeability obviously as similar as increase of gas diffusion coefficient to increase gas-phase permeability. Moreover, the pore structure will become complicated with the increase of fractal dimension, which would reduce the gas-water relative permeability. This study has provided new insights for development of gas reservoirs with nanoscale pores such as shale.

  11. Surface velocity divergence model of air/water interfacial gas transfer in open-channel flows

    Science.gov (United States)

    Sanjou, M.; Nezu, I.; Okamoto, T.

    2017-04-01

    Air/water interfacial gas transfer through a free surface plays a significant role in preserving and restoring water quality in creeks and rivers. However, direct measurements of the gas transfer velocity and reaeration coefficient are still difficult, and therefore a reliable prediction model needs to be developed. Varying systematically the bulk-mean velocity and water depth, laboratory flume experiments were conducted and we measured surface velocities and dissolved oxygen (DO) concentrations in open-channel flows to reveal the relationship between DO transfer velocity and surface divergence (SD). Horizontal particle image velocimetry measurements provide the time-variations of surface velocity divergence. Positive and negative regions of surface velocity divergence are transferred downstream in time, as occurs in boil phenomenon on natural river free-surfaces. The result implies that interfacial gas transfer is related to bottom-situated turbulence motion and vertical mass transfer. The original SD model focuses mainly on small-scale viscous motion, and this model strongly depends on the water depth. Therefore, we modify the SD model theoretically to accommodate the effects of the water depth on gas transfer, introducing a non-dimensional parameter that includes contributions of depth-scale large-vortex motion, such as secondary currents, to surface renewal events related to DO transport. The modified SD model proved effective and reasonable without any dependence on the bulk mean velocity and water depth, and has a larger coefficient of determination than the original SD model. Furthermore, modeling of friction velocity with the Reynolds number improves the practicality of a new formula that is expected to be used in studies of natural rivers.

  12. Interfacial friction factors for air-water co-current stratified flow in inclined channels

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Ki Yong; No, Hee Cheon [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1997-12-31

    The interfacial shear stress is experimentally investigated for co-current air-water stratified flow in inclined rectangular channels having a length of 1854mm, width of 120 mm and height of 40mm at almost atmospheric pressure. Experiments are carried out in several inclinations from 0 deg up to 10 deg. The local film thickness and the wave height are measured at three locations, i.e., L/H = 8,23, and 40. According to the inclination angle, the experimental data are categorized into two groups; nearly horizontal data group (0 deg {<=} {theta} {<=} 0.7 deg), and inclined channel data group (0.7 deg {<=} {theta} {<=} 10 deg ). Experimental observations for nearly horizontal data group show that the flow is not fully developed due to the water level gradient and the hydraulic jump within the channel. For the inclined channel data group, a dimensionless wave height, {Delta}h/h, is empirically correlated in terms of Re{sub G} and h/H. A modified root-mean-square wave height is proposed to consider the effects of the interfacial and wave propagation velocities. It is found that an equivalent roughness has a linear relationship with the modified root-mean-square wave height and its relationship is independent of the inclination. 10 refs., 6 figs., 1 tab. (Author)

  13. The effect of interfacial microstructure on the lipid oxidation stability of oil-in-water emulsions.

    Science.gov (United States)

    Kargar, Maryam; Spyropoulos, Fotios; Norton, Ian T

    2011-05-15

    A novel approach to reduce lipid oxidation in oil-in-water emulsions has been taken and involves the manipulation of the emulsions' interfacial microstructure. Oil-in-water emulsions stabilised by sodium caseinate (CAS), Tween 20 and silica particles were prepared and their lipid oxidation stability was assessed over a week. Lipid oxidation was monitored by measuring the concentration of primary lipid oxidation product, using the peroxide value method and secondary lipid oxidation products formation were evaluated with the p-anisidine technique. Oil-phase volume fraction and emulsifier type both play key roles in influencing the rate of lipid oxidation. Decreasing the oil fraction from 30% to 5% was found to promote lipid oxidation as a result of an increase in the amount of pro-oxidant iron per gram of oil. It was further shown that, CAS in the continuous phase reduces lipid oxidation at pH 7 due to its metal chelating ability. In addition, the results show that, emulsions stabilised with silica particles (at pH 2) inhibit lipid oxidation to a greater extent than emulsions stabilised with surfactants alone. The present study demonstrates that emulsions' physical properties such as oil-phase volume fraction, droplet size and droplet interfacial microstructure are all formulation parameters that can be used to significantly reduce the rate of lipid oxidation. Copyright © 2011 Elsevier Inc. All rights reserved.

  14. Water-Soluble Polymeric Interfacial Material for Planar Perovskite Solar Cells.

    Science.gov (United States)

    Zheng, Lingling; Ma, Yingzhuang; Xiao, Lixin; Zhang, Fengyan; Wang, Yuanhao; Yang, Hongxing

    2017-04-26

    Interfacial materials play a critical role in photoelectric conversion properties as well as the anomalous hysteresis phenomenon of the perovskite solar cells (PSCs). In this article, a water-soluble polythiophene PTEBS was employed as a cathode interfacial material for PSCs. Efficient energy level aligning and improved film morphology were obtained due to an ultrathin coating of PTEBS. Better ohmic contact between the perovskite layer and the cathode also benefits the charge transport and extraction of the device. Moreover, less charge accumulation at the interface weakens the polarization of the perovskite resulting in a relatively quick response of the modified device. The ITO/PTEBS/CH3NH3PbI3/spiro-MeOTAD/Au cells by an all low-temperature process achieved power conversion efficiencies of up to 15.4% without apparent hysteresis effect. Consequently, the utilization of this water-soluble polythiophene is a practical approach for the fabrication of highly efficient, large-area, and low-cost PSCs and compatible with low-temperature solution process, roll-to-roll manufacture, and flexible application.

  15. On understanding microemulsions : I. Interfacial tensions and adsorptions of SDS and pentanol at the cyclohexane/water interface

    NARCIS (Netherlands)

    Verhoeckx, G.J.; Bruyn, P.L. de; Overbeek, J.Th.G.

    1987-01-01

    We measured interfacial tensions using the spinning drop technique in two-phase oil/water (O/W) systems containing sodium dodecyl sulfate (SDS), n-pentanol, NaCl, cyclohexane, and water. The systems contained only small amounts of SDS (mostly

  16. Interfacial Shear Rheology of β-Lactoglobulin - Bovine Submaxillary Mucin Layers Adsorbed at Air/Water Interface

    DEFF Research Database (Denmark)

    Celebioglu, Hilal Yilmaz; Kmiecik-Palczewska, Joanna; Lee, Seunghwan

    2017-01-01

    that hydrophobic patches of BSM can be imbedded into the BLG monolayer as driven by a strong hydrophobic interaction with air and disrupt the cohesive assembly of BLG, whereas the hydrophilic (negatively charged) parts of the BSM chain are protruding from the interface towards the bulk water.......The interfacial rheological properties of solutions of β-lactoglobulin (BLG), as a model food compound, mixed with bovine submaxillary mucin (BSM), a major salivary protein, have been investigated. Time, frequency, stress sweep and flow measurements have been performed at different pHs (7.4, 5.......0 and 3.0), to investigate the air/water interfacial properties. All protein layers (BLG, BSM, and BLG-BSM mixtures) formed an elastic network at the air/water interface with low frequency dependence of the interfacial modulus. The results indicated that BLG moves faster as smaller molecule than mucin...

  17. A molecular dynamics study of local pressures and interfacial tensions of SDS micelles and dodecane droplets in water.

    Science.gov (United States)

    Kitabata, Masahiro; Fujimoto, Kazushi; Yoshii, Noriyuki; Okazaki, Susumu

    2016-06-14

    To obtain the radial (normal) and lateral (transverse) components of the local pressure tensor, PN(R) and PT(R), respectively, and the interfacial tension of micelles, molecular dynamics (MD) calculations were performed for spherical sodium dodecyl sulfate (SDS) micelles. The local pressure tensor was calculated as a function of radial distance R using the Irving-Kirkwood formula. Similar MD calculations were also carried out for an n-dodecane droplet in water to compare the differences in the local pressure and interfacial tension values with those of the micelles. The calculated interfacial tensions were 20 ± 5 and 44 ± 10 mN/m for the SDS micelles and dodecane droplets, respectively. The excess free energies due to the interfacial tension were 340 and 1331 kJ/mol for the SDS micelle and dodecane droplet, respectively. The micelles are stabilized by 991 kJ/mol by covering their hydrophobic cores with hydrophilic groups. The dodecane droplet has a large interfacial tension caused by the zero or positive values of PN(R) - PT(R) at all values of R. In contrast, the small interfacial tension in the SDS micelles comes from the negative PN(R) - PT(R) values over a wide range of R. The pressure difference between the inside and outside of the oil droplet and its interfacial tension well satisfies the Laplace equation. However, the hydrophobic core of the SDS micelle is quite different from the liquid alkane, and the SDS micelles do not follow Laplace's picture. Decomposing the interfacial tension into contributions from various interactions, it is found that those between charged and polar groups dominate the interfacial tension of the SDS micelles. The positive electrostatic potential (1.3 V) on the micelle surface and the negative potential (-0.15 V) on the oil droplet contribute to the interfacial tensions by 19 and 0.5 mN/m, respectively. Thus, the interfacial tension of the SDS micelles is produced by electrostatic interactions, in contrast to the dodecane

  18. Water-Insoluble Photosensitizer Nanocolloids Stabilized by Supramolecular Interfacial Assembly towards Photodynamic Therapy

    Science.gov (United States)

    Liu, Yamei; Ma, Kai; Jiao, Tifeng; Xing, Ruirui; Shen, Guizhi; Yan, Xuehai

    2017-02-01

    Nanoengineering of hydrophobic photosensitizers (PSs) is a promising approach for improved tumor delivery and enhanced photodynamic therapy (PDT) efficiency. A variety of delivery carriers have been developed for tumor delivery of PSs through the enhanced permeation and retention (EPR) effect. However, a high-performance PS delivery system with minimum use of carrier materials with excellent biocompatibility is highly appreciated. In this work, we utilized the spatiotemporal interfacial adhesion and assembly of supramolecular coordination to achieve the nanoengineering of water-insoluble photosensitizer Chlorin e6 (Ce6). The hydrophobic Ce6 nanoparticles are well stabilized in a aqueous medium by the interfacially-assembled film due to the coordination polymerization of tannic acid (TA) and ferric iron (Fe(III)). The resulting Ce6@TA-Fe(III) complex nanoparticles (referenced as Ce6@TA-Fe(III) NPs) significantly improves the drug loading content (~65%) and have an average size of 60 nm. The Ce6@TA-Fe(III) NPs are almost non-emissive as the aggregated states, but they can light up after intracellular internalization, which thus realizes low dark toxicity and excellent phototoxicity under laser irradiation. The Ce6@TA-Fe(III) NPs prolong blood circulation, promote tumor-selective accumulation of PSs, and enhanced antitumor efficacy in comparison to the free-carrier Ce6 in vivo evaluation.

  19. The Battle for Heavy Water Three physicists' heroic exploits

    CERN Multimedia

    2002-01-01

    Up until the end of the 1970s you could still catch a glimpse of his massive silhouette in the corridors of CERN. Lew Kowarksi, one of the pioneers of the Laboratory, was not only a great physicist; he was also a genuine hero of World War II. In 1940, along with Frédéric Joliot and Hans von Halban, Lew Kowarski managed to get the entire world supply of heavy water away to safety from the Nazis after a fantastic escape from occupied France. At the end of the war, the three physicists played themselves in a film about their adventures entitled 'la Bataille de l'eau lourde'. This film, which has been loaned to us by the French National Film Library, will be shown at CERN for the first time next Thursday. At the beginning of the war, heavy water (D20, two atoms of deuterium and one oxygen atom) was of strategic importance. In 1939 Frédéric Joliot, aided by Hans von Halban and Lew Kowarski, demonstrated the nuclear chain reaction and the moderator role that heavy water plays in it. A few weeks before the inv...

  20. Fundamentals of Melt-Water Interfacial Transport Phenomena: Improved Understanding for Innovative Safety Technologies in ALWRs

    Energy Technology Data Exchange (ETDEWEB)

    M. Anderson; M. Corradini; K.Y. Bank; R. Bonazza; D. Cho

    2005-04-26

    The interaction and mixing of high-temperature melt and water is the important technical issue in the safety assessment of water-cooled reactors to achieve ultimate core coolability. For specific advanced light water reactor (ALWR) designs, deliberate mixing of the core-melt and water is being considered as a mitigative measure, to assure ex-vessel core coolability. The goal of this work is to provide the fundamental understanding needed for melt-water interfacial transport phenomena, thus enabling the development of innovative safety technologies for advanced LWRs that will assure ex-vessel core coolability. The work considers the ex-vessel coolability phenomena in two stages. The first stage is the melt quenching process and is being addressed by Argonne National Lab and University of Wisconsin in modified test facilities. Given a quenched melt in the form of solidified debris, the second stage is to characterize the long-term debris cooling process and is being addressed by Korean Maritime University in via test and analyses. We then address the appropriate scaling and design methodologies for reactor applications.

  1. Interfacial water at hydrophobic and hydrophilic surfaces: slip, viscosity, and diffusion.

    Science.gov (United States)

    Sendner, Christian; Horinek, Dominik; Bocquet, Lyderic; Netz, Roland R

    2009-09-15

    The dynamics and structure of water at hydrophobic and hydrophilic diamond surfaces is examined via non-equilibrium Molecular Dynamics simulations. For hydrophobic surfaces under shearing conditions, the general hydrodynamic boundary condition involves a finite surface slip. The value of the slip length depends sensitively on the surface water interaction strength and the surface roughness; heuristic scaling relations between slip length, contact angle, and depletion layer thickness are proposed. Inert gas in the aqueous phase exhibits pronounced surface activity but only mildly increases the slip length. On polar hydrophilic surfaces, in contrast, slip is absent, but the water viscosity is found to be increased within a thin surface layer. The viscosity and the thickness of this surface layer depend on the density of polar surface groups. The dynamics of single water molecules in the surface layer exhibits a similar distinction: on hydrophobic surfaces the dynamics is purely diffusive, while close to a hydrophilic surface transient binding or trapping of water molecules over times of the order of hundreds of picoseconds occurs. We also discuss in detail the effect of the Lennard-Jones cutoff length on the interfacial properties.

  2. Changes in air saturation and air water interfacial area during surfactant-enhanced air sparging in saturated sand

    Science.gov (United States)

    Kim, Heonki; Choi, Kyong-Min; Moon, Ji-Won; Annable, Michael D.

    2006-11-01

    Reduction in the surface tension of groundwater, prior to air sparging for removal of volatile organic contaminant from aquifer, can greatly enhance the air content and the extent of influence when air sparging is implemented. However, detailed information on the functional relationship between water saturation, air-water contact area induced by air sparging and the surface tension of water has not been available. In this study, the influence of adding water-soluble anionic surfactant (sodium dodecyl benzene sulfonate) into groundwater before air sparging on the air-water interfacial area and water saturation was investigated using a laboratory-scale sand packed column. It was found that water saturation decreases with decreasing surface tension of water until it reaches a point where this trend is reversed so that water saturation increases with further decrease in the surface tension. The lowest water saturation of 0.58 was achieved at a surface tension of 45.4 dyn/cm, which is considered as the optimum surface tension for maximum de-saturation for the initially water-saturated sand used in this study. The air-water contact area generated in the sand column due to air sparging was measured using a gaseous interfacial tracer, n-decane, and was found to monotonically increase with decreasing water saturation. The results of this study provide useful design information for surfactant-enhanced air sparging removal of volatile contaminants from aquifers.

  3. Influence of water on the interfacial behavior of gallium liquid metal alloys.

    Science.gov (United States)

    Khan, Mohammad R; Trlica, Chris; So, Ju-Hee; Valeri, Michael; Dickey, Michael D

    2014-12-24

    Eutectic gallium indium (EGaIn) is a promising liquid metal for a variety of electrical and optical applications that take advantage of its soft and fluid properties. The presence of a rapidly forming oxide skin on the surface of the metal causes it to stick to many surfaces, which limits the ability to easily reconfigure its shape on demand. This paper shows that water can provide an interfacial slip layer between EGaIn and other surfaces, which allows the metal to flow smoothly through capillaries and across surfaces without sticking. Rheological and surface characterization shows that the presence of water also changes the chemical composition of the oxide skin and weakens its mechanical strength, although not enough to allow the metal to flow freely in microchannels without the slip layer. The slip layer provides new opportunities to control and actuate liquid metal plugs in microchannels-including the use of continuous electrowetting-enabling new possibilities for shape reconfigurable electronics, sensors, actuators, and antennas.

  4. Self-floating carbon nanotube membrane on macroporous silica substrate for highly efficient solar-driven interfacial water evaporation

    KAUST Repository

    Wang, Yuchao

    2016-01-22

    Given the emerging energy and water challenges facing the mankind, solar-driven water evaporation has been gaining renewed research attention from both academia and industry as an energy efficient means of wastewater treatment and clean water production. In this project, a bi-layered material, consisting of a top self-floating hydrophobic CNT membrane and a bottom hydrophilic macroporous silica substrate, was rationally designed and fabricated for highly energy-efficient solar driven water evaporation based on the concept of interfacial heating. The top thin CNT membrane with excellent light adsorption capability, acted as photothermal component, which harvested and converted almost the entire incident light to heat for exclusively heating of interfacial water. On the other hand, the macroporous silica substrate provided multi-functions toward further improvement of operation stability and water evaporation performance of the material, including water pumping, mechanical support and heat barriers. The silica substrate was conducive in forming the rough surface structures of the CNT top layers during vacuum filtration and thus indirectly contributed to high light adsorption by the top CNT layers. With optimized thicknesses of the CNT top layer and silica substrate, a solar thermal conversion efficiency of 82 % was achieved in this study. The bi-layered material also showed great performance toward water evaporation from seawater and contaminated water, realizing the separation of water from pollutants, and indicating its application versatility.

  5. Wettability of supercritical carbon dioxide/water/quartz systems: simultaneous measurement of contact angle and interfacial tension at reservoir conditions.

    Science.gov (United States)

    Saraji, Soheil; Goual, Lamia; Piri, Mohammad; Plancher, Henry

    2013-06-11

    Injection of carbon dioxide in deep saline aquifers is considered as a method of carbon sequestration. The efficiency of this process is dependent on the fluid-fluid and rock-fluid interactions inside the porous media. For instance, the final storage capacity and total amount of capillary-trapped CO2 inside an aquifer are affected by the interfacial tension between the fluids and the contact angle between the fluids and the rock mineral surface. A thorough study of these parameters and their variations with temperature and pressure will provide a better understanding of the carbon sequestration process and thus improve predictions of the sequestration efficiency. In this study, the controversial concept of wettability alteration of quartz surfaces in the presence of supercritical carbon dioxide (sc-CO2) was investigated. A novel apparatus for measuring interfacial tension and contact angle at high temperatures and pressures based on Axisymmetric Drop Shape Analysis with no-Apex (ADSA-NA) method was developed and validated with a simple system. Densities, interfacial tensions, and dynamic contact angles of CO2/water/quartz systems were determined for a wide range of pressures and temperatures relevant to geological sequestration of CO2 in the subcritical and supercritical states. Image analysis was performed with ADSA-NA method that allows the determination of both interfacial tensions and contact angles with high accuracy. The results show that supercritical CO2 alters the wettability of quartz surface toward less water-wet conditions compared to subcritical CO2. Also we observed an increase in the water advancing contact angles with increasing temperature indicating less water-wet quartz surfaces at higher temperatures.

  6. Exploitation Status of Devis’Anchovy in Kei Island Waters: Based on Total Length Data

    Science.gov (United States)

    Supeni, E. A.; Dobo, J.

    2017-10-01

    Devis’ anchovy (Encrasicholina devisi) are a group of small pelagic fishes, which is thought to be one of the most abundant fishery resources in Indonesian waters. The high utilized of this resources will certainly affect to population status. This research aimed to know the exploitation status of anchovy in Kei Island waters. Sampling was carried out by using the data collected from lift net catches during April to July 2016 at Sathean, Selayar and Lebetawi, Kei Islands. A total of 3,524 anchovies were analyzed based on total length that ranged from 23 to 87 mm with a mean length of 55.4 ± 11.8 mm. The von Bertalanffy growth parameters estimated were L∞ = 89.25 mm and K = 0.74 year-1, with the growth models equation is Lt = 89.25 (1 ‑ e ‑0.74(t+0.161). The result of mortality analysis showed that Z = 2.97, M = 1.098, F= 1.87 year-1 and E = 0.63. This study reveals that exploitation status of anchovy in Kei Island is on fully exploited and leads to the over exploited condition.

  7. Modeling a hierarchical structure of factors influencing exploitation policy for water distribution systems using ISM approach

    Science.gov (United States)

    Jasiulewicz-Kaczmarek, Małgorzata; Wyczółkowski, Ryszard; Gładysiak, Violetta

    2017-12-01

    Water distribution systems are one of the basic elements of contemporary technical infrastructure of urban and rural areas. It is a complex engineering system composed of transmission networks and auxiliary equipment (e.g. controllers, checkouts etc.), scattered territorially over a large area. From the water distribution system operation point of view, its basic features are: functional variability, resulting from the need to adjust the system to temporary fluctuations in demand for water and territorial dispersion. The main research questions are: What external factors should be taken into account when developing an effective water distribution policy? Does the size and nature of the water distribution system significantly affect the exploitation policy implemented? These questions have shaped the objectives of research and the method of research implementation.

  8. Effect of Cu2+ Activation on Interfacial Water Structure at the Sphalerite Surface as Studied by Molecular Dynamics Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Jiaqi; Miller, Jan D.; Dang, Liem X.; Wick, Collin D.

    2015-12-10

    In the first part of this paper, an experimental contact angle study of the fresh and Cu2+ activated sphalerite-ZnS surface as well as the covellite-CuS (001) surface is reported describing the increased hydrophobic character of the surface during Cu2+ activation. In addition to these experimental results, the fresh sphalerite-ZnS (110), copper-zinc sulfide-CuZnS2 (110), villamaninite- CuS2 (100), and covellite-CuS (001) surfaces were examined using Molecular Dynamics Simulation (MDS). Our MDS results on the behavior of interfacial water at the fresh sphalerite-ZnS (110), copper-zinc sulfide-CuZnS2 (110), villamaninite-CuS2 (100), and covellite-CuS (001) surfaces include simulated contact angles, water number density distribution, water dipole orientation, water residence time, and hydrogen-bonding considerations. The copper content at the Cu2+ activated sphalerite surface seems to account for the increased hydrophobicity as revealed by both experimental and MD simulated contact angle measurements. The relatively greater hydrophobic character developed at the Cu2+ activated sphalerite surface and at the copper-zinc sulfide surface has been described by MDS, based on the structure of interfacial water and its dynamic properties. L.X.D. acknowledges funding from the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences.

  9. Interfacial behaviour between oil/water systems using ionic surfactants from regional vegetable industry and animal pet

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Francisco Klebson G.; Alves, Juan V.A.; Dantas, Tereza N. Castro; Dutra Junior, Tarcilio V.; Barros Neto, Eduardo L. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    Interfacial tension (IFT) is one of the most important physical properties in the study of fluid-fluid interfaces. In this research the surfactants - saponified coconut oil, saponified castor oil, saponified soybean oil, saponified sunflower oil and basis soap - were synthesized in laboratory, using carboxylic acids from regional industry and animal fat (bovine fat). This study focuses on the search of a high-efficient, low-cost, and safe for the environment flooding system to be applied in enhanced oil recovery. The principal aim of this work is the obtaining of interfacial tensions between oil/water systems, using the developed ionic surfactants. Results showed that the studied surfactants are able to reduce the IFT between oil and brine. The surfactant that was more effective in reducing the IFT value was the one from animal fat. The composition, as well as the kind of the bond, as saturated or unsaturated, of the surfactants has influence in the IFT value. The ionic surfactants from regional industry and animal fat besides presenting low cost propitiate very low interfacial tensions between oil and brine, favoring the interactions with residual oil and thus increasing oil recovery. (author)

  10. Interfacial rheological properties and conformational aspects of soy glycinin at the air/water interface

    NARCIS (Netherlands)

    Martin, A.H.; Bos, M.A.; Vliet, van T.

    2002-01-01

    Interfacial (rheological) properties of soy glycinin were studied at different pH. At acidic and high alkaline pH glycinin (11S form, Mw~350 kDa) dissociates into smaller subunits, the so called 3S form (Mw~44 kDa) and 7S form (Mw~175 kDa). This dissociation behaviour is expected to affect the

  11. Activity coefficients, interfacial tensions and retention in reversed-phase liquid chormatography on LiChrosorb RP-18 with methanol-water mixtures

    NARCIS (Netherlands)

    Hammers, W.E.; Meurs, G.J.; Ligny, C.L. de

    1982-01-01

    Literature data on activity coefficients of various solutes in water, of some tetraalkyl compounds in methanol-water mixture and of water in organic solvents have been correlated with the product of the molecular surface area of the solute and the solute-solvent interfacial tension at ambient

  12. Effect of interfacial structure on bioinert properties of poly(2-methoxyethyl acrylate)/poly(methyl methacrylate) blend films in water.

    Science.gov (United States)

    Hirata, T; Matsuno, H; Kawaguchi, D; Yamada, N L; Tanaka, M; Tanaka, K

    2015-07-14

    In this study, we found that the surface made of a mixture of poly(2-methoxyethyl acrylate) (PMEA) and poly(methyl methacrylate) (PMMA) exhibited excellent blood compatibility by inhibiting platelet adhesion. To obtain a better understanding of this bioinertness, the polymer/water interface was characterized by neutron reflectivity measurements and sum frequency generation spectroscopy, in conjunction with bubble contact angle measurements. Based on the results, we can say that the outermost region of the blend film was reorganized in water. When the orientation of PMEA segments at the water interface became random with increasing immersion time, the fractional amount of lower-coordinated water molecules increased at the interface. Such an interfacial structure caused the suppression of platelet adhesion.

  13. High sulfur content polymer nanoparticles obtained from interfacial polymerization of sodium polysulfide and 1,2,3-trichloropropane in water.

    Science.gov (United States)

    Lim, Jeewoo; Jung, Unho; Joe, Won Tae; Kim, Eui Tae; Pyun, Jeffrey; Char, Kookheon

    2015-06-01

    Sulfur-rich materials have recently attracted keen interest for their potentials in optical, electrochemical, and pesticidal applications as well as their utility in dynamic covalent bond chemistry. Many sulfur-rich polymers, however, are insoluble and processing methods are therefore very limited. The synthesis and characterization of water-dispersible polymer nanoparticles (NPs) with the sulfur content exceeding 75% by weight, obtained from the interfacial polymerization between 1,2,3-trichloropropane and sodium polysulfide in water is reported here. The interfacial polymerization yields well-defined sulfur-rich NPs in the presence of surfactants, which are capable of serving a dual role as a phase transfer catalyst on top of emulsifiers. Such dual role allows for the control of the product NP size by varying its concentration. The surfactants can be easily removed by centrifugation and redispersion in water is also reported here. The resulting sulfur-rich NPs are characterized through elemental analysis, dynamic light scattering, ζ-potential measurements, and scanning electron microscopy. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Surface-charge-induced orientation of interfacial water suppresses heterogeneous ice nucleation on α-alumina (0001

    Directory of Open Access Journals (Sweden)

    A. Abdelmonem

    2017-06-01

    Full Text Available Surface charge is one of the surface properties of atmospheric aerosols, which has been linked to heterogeneous ice nucleation and hence cloud formation, microphysics, and optical properties. Despite the importance of surface charge for ice nucleation, many questions remain on the molecular-level mechanisms at work. Here, we combine droplet-freezing assay studies with vibrational sum frequency generation (SFG spectroscopy to correlate interfacial water structure to surface nucleation strength. We study immersion freezing of aqueous solutions of various pHs on the atmospherically relevant aluminum oxide α-Al2O3 (0001 surface using an isolated droplet on the surface. The high-pH solutions freeze at temperatures higher than that of the low-pH solution, while the neutral pH has the highest freezing temperature. On the molecular level, the SFG spectrum of the interfacial water changes substantially upon freezing. At all pHs, crystallization leads to a reduction of intensity of the 3400 cm−1 water resonance, while the 3200 cm−1 intensity drops for low pH but increases for neutral and high pHs. We find that charge-induced surface templating suppresses nucleation, irrespective of the sign of the surface charge. Heterogeneous nucleation is most efficient for the nominally neutral surface.

  15. Surface-charge-induced orientation of interfacial water suppresses heterogeneous ice nucleation on α-alumina (0001)

    Science.gov (United States)

    Abdelmonem, Ahmed; Backus, Ellen H. G.; Hoffmann, Nadine; Sánchez, M. Alejandra; Cyran, Jenée D.; Kiselev, Alexei; Bonn, Mischa

    2017-06-01

    Surface charge is one of the surface properties of atmospheric aerosols, which has been linked to heterogeneous ice nucleation and hence cloud formation, microphysics, and optical properties. Despite the importance of surface charge for ice nucleation, many questions remain on the molecular-level mechanisms at work. Here, we combine droplet-freezing assay studies with vibrational sum frequency generation (SFG) spectroscopy to correlate interfacial water structure to surface nucleation strength. We study immersion freezing of aqueous solutions of various pHs on the atmospherically relevant aluminum oxide α-Al2O3 (0001) surface using an isolated droplet on the surface. The high-pH solutions freeze at temperatures higher than that of the low-pH solution, while the neutral pH has the highest freezing temperature. On the molecular level, the SFG spectrum of the interfacial water changes substantially upon freezing. At all pHs, crystallization leads to a reduction of intensity of the 3400 cm-1 water resonance, while the 3200 cm-1 intensity drops for low pH but increases for neutral and high pHs. We find that charge-induced surface templating suppresses nucleation, irrespective of the sign of the surface charge. Heterogeneous nucleation is most efficient for the nominally neutral surface.

  16. Interfacial rheological properties and conformational aspects of soy glycinin at the air/water interface

    NARCIS (Netherlands)

    Martin, A.H.; Bos, M.A.; Vliet, T. van

    2002-01-01

    Interfacial (rheological) properties of soy glycinin were studied at different pH. At acidic and high alkaline pH glycinin (11S form, Mw ∼ 350 kDa) dissociates into smaller subunits, the so called 3S form (Mw ∼ 44 kDa) and 7S form (Mw ∼ 175 kDa). This dissociation behaviour is expected to affect the

  17. Dynamics in a Water Interfacial Boundary Layer Investigated with IR Polarization-Selective Pump-Probe Experiments.

    Science.gov (United States)

    Yuan, Rongfeng; Yan, Chang; Nishida, Jun; Fayer, Michael D

    2017-05-04

    The dynamics of water molecules near the surfactant interface in large Aerosol-OT reverse micelles (RMs) (w 0 = 16-25) was investigated with IR polarization-selective pump-probe experiments using the SeCN - anion as a vibrational probe. Linear absorption spectra of RMs (w 0 = 25-2) can be decomposed into the weighted sum of the SeCN - spectra in bulk water and the spectrum of the SeCN - anion interacting with the interfacial sulfonate head groups (w 0 = 1). The spectra of the large RMs, w 0 ≥ 16, are overwhelmingly dominated by the bulk water component. Anisotropy decays (orientational relaxation) of the anion for w 0 ≥ 16 displayed bulk water relaxation (1.4 and 4.5 ps) plus an additional slow decay with a time constant of ∼13 ps. The amplitude of the slow decay was too large to be associated with SeCN - in contact with the interface on the basis of the linear spectrum decomposition. The results indicate that the observed slow components arise from SeCN - in a water boundary layer, in which water molecules are perturbed by the interface but are not directly associated with it. This layer is the transition between water in direct contact with the interface and bulk water in the large RM cores. In the boundary layer, the water dynamics is slow compared to that in bulk water.

  18. Synthesis of ZnO nanoparticles for oil-water interfacial tension reduction in enhanced oil recovery

    Science.gov (United States)

    Soleimani, Hassan; Baig, Mirza Khurram; Yahya, Noorhana; Khodapanah, Leila; Sabet, Maziyar; Demiral, Birol M. R.; Burda, Marek

    2018-02-01

    Nanoparticles show potential use in applications associated with upstream oil and gas engineering to increase the performance of numerous methods such as wettability alteration, interfacial tension reduction, thermal conductivity and enhanced oil recovery operations. Surface tension optimization is an important parameter in enhanced oil recovery. Current work focuses on the new economical method of surface tension optimization of ZnO nanofluids for oil-water interfacial tension reduction in enhanced oil recovery. In this paper, zinc oxide (ZnO) nanocrystallites were prepared using the chemical route and explored for enhanced oil recovery (EOR). Adsorption of ZnO nanoparticles (NPs) on calcite (111) surface was investigated using the adsorption locator module of Materials Studio software. It was found that ZnO nanoparticles show maximum adsorption energy of - 253 kcal/mol. The adsorption of ZnO on the rock surface changes the wettability which results in capillary force reduction and consequently increasing EOR. The nanofluids have been prepared by varying the concentration of ZnO nanoparticles to find the optimum value for surface tension. The surface tension (ST) was calculated with different concentration of ZnO nanoparticles using the pendant drop method. The results show a maximum value of ST 35.57 mN/m at 0.3 wt% of ZnO NPs. It was found that the nanofluid with highest surface tension (0.3 wt%) resulted in higher recovery efficiency. The highest recovery factor of 11.82% at 0.3 wt% is due to the oil/water interfacial tension reduction and wettability alteration.

  19. The Influence of Surface Tension Gradients on Surfactant Tracer Measurement of Air-Water Interfacial Area in Porous Media

    Science.gov (United States)

    Costanza-Robinson, M. S.; Estabrook, B. D.; Henry, E. J.

    2009-12-01

    Air-water interfacial area (AI) in porous media is an important factor governing equilibrium contaminant retention, as well as the kinetics of interphase mass transfer, such as delivery of oxygen to roots and volatilization of methane from landfills. Despite this importance, significant method-dependence is observed among techniques used to determine AI in porous media. In this work, possible low bias in conventional aqueous interfacial-partitioning tracer methodology (IPT) was examined by comparison of IPT-AI estimates with more direct estimates obtained using synchrotron X-ray microtomographic (µCT) imaging. Sodium dodecyl benzene sulfonate and pentafluorobenzoate were used as interfacial and nonreactive tracers, respectively, to measure AI at three water saturations (Sw) in a natural fine sand. IPT-AI exhibited expected trends, with higher areas associated with drier conditions, but the magnitude of AI was as much as 50% lower than those measured by µCT. IPT-AI values for the driest system agreed most closely with microtomography data. Real-time system mass measurements revealed that upon introduction of the surfactant tracer, system Sw decreased by 15-30%; the driest system exhibited the least drainage. This drainage is consistent with a reduction in capillarity caused by the lower surface tension of the surfactant solution as compared to the surfactant-free resident fluid. Drainage in the direction of flow would lead to earlier breakthrough of the surfactant tracer and a lower AI-estimate. In fact, the magnitude of drainage and magnitude of AI-underestimation relative to µCT were qualitatively correlated. Although this effect was expected, its magnitude and potential influence on AI was previously unknown and was larger than anticipated.

  20. Polyaniline - Carrageenan - Polyvinyl Alcohol Composite Material Synthesized Via Interfacial Polymerization, its Morphological Characteristics and Enhanced Solubility in Water

    Science.gov (United States)

    Montalbo, R. C. K.; Marquez, M. C.

    2017-09-01

    In recent years, conducting polyaniline (PAni) has been a popular interest of research in the field of conducting polymers due to its relatively low cost, ease of production, good conductivity, and environmental stability. Many studies however, have focused on improving its short-comings such as its limited processability and solubility in common solvents. In this study, PAni, soluble in water was produced via interfacial polymerization with chloroform as the organic solvent. Poly(vinyl alcohol) (PVA) and kappa(κ), iota(ι) and lambda(λ) - carrageenan (κCGN, ιCGN, λCGN) were added to the aqueous layer to stabilize PAni in the medium. FTIR and UV-Vis absorption spectra of the solutions as well as the fabricated film confirmed the existence of PAni emeraldine salt (PAni-ES). FTIR spectrum also confirmed the peaks corresponding to the interaction of PAni with the CGNs. Moreover, PVA-CGN played a very large role on the stability of the PAni nanofibers integrated on the PVA-CGN matrix. The morphologies of the products were further investigated using SEM and TEM. Polymer electrolyte for supercapacitor or an interfacial layer for organic solar cell is being targeted as potential application of the synthesized water soluble PAni.

  1. A comparison of corn fiber gum, hydrophobically modified starch, gum arabic and soybean soluble polysaccharide: interfacial dynamics, viscoelastic response at oil/water interfaces and emulsion stabilization mechanisms

    Science.gov (United States)

    The interfacial rheology of polysaccharide adsorption layers of corn fiber gum (CFG), octenyl succinate anhydride-modified starch (OSA-s), gum arabic (GA) and soybean soluble polysaccharides (SSPS) at the oil/water interface and their emulsifying properties in oil-in-water (O/W) emulsions were compa...

  2. Interfacial Water Structure and Cation Binding with the Dppc Phosphate at Air /aqueous Interfaces Studied by Vibrational Sum Frequency Generation Spectroscopy

    Science.gov (United States)

    Hua, Wei; Allen, Heather C.

    2012-06-01

    Molecular-level knowledge of water structure and cation binding specificity to lipid headgroups at lipid/water interfaces plays a key role in many relevant chemical, biological, and environmental processes. To obtain information on the molecular organization at aqueous interfaces, vibrational sum frequency generation (VSFG) has been applied extensively as an interface-specific technique. Dipalmitoylphosphocholine (DPPC) is a major component of cell membranes and has been used as a proxy for the organic coating on fat-coated aerosols. In the present work, in addition to conventional VSFG studies on cation interaction with the phosphate headgroup moiety of DPPC, we employ phase-sensitive vibrational sum frequency generation (PS-VSFG) to investigate the average direction of the transition dipole moment of interfacial water molecules. The average orientation of water structure at DPPC/water interfaces is inferred. DPPC orients interfacial water molecules on average with their net transition dipole moment pointing towards the surface. The influence of Na+, K+, Mg2+, Ca2+ is identified in regard to interfacial water structure and DPPC headgroup organization. Ca2+ is observed to have greater impact on the water structure and a unique binding affinity to the phosphate headgroup relative to other cations tested. In highly concentrated Ca2+ regimes the already disturbed interfacial hydrogen-bonding network reorganizes to resemble that of the neat salt solution interface.

  3. Effect of Surface Oxidation on Interfacial Water Structure at a Pyrite (100) Surface as Studied by Molecular Dynamics Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Jiaqi; Miller, Jan D.; Dang, Liem X.; Wick, Collin D.

    2015-06-01

    In the first part of this paper, a Scanning Electron Microscopy and contact angle study of a pyrite surface (100) is reported describing the relationship between surface oxidation and the hydrophilic surface state. In addition to these experimental results, the following simulated surface states were examined using Molecular Dynamics Simulation (MDS): fresh unoxidized (100) surface; polysulfide at the (100) surface; elemental sulfur at the (100) surface. Crystal structures for the polysulfide and elemental sulfur at the (100) surface were simulated using Density Functional Theory (DFT) quantum chemical calculations. The well known oxidation mechanism which involves formation of a metal deficient layer was also described with DFT. Our MDS results of the behavior of interfacial water at the fresh and oxidized pyrite (100) surfaces without/with the presence of ferric hydroxide include simulated contact angles, number density distribution for water, water dipole orientation, water residence time, and hydrogen-bonding considerations. The significance of the formation of ferric hydroxide islands in accounting for the corresponding hydrophilic surface state is revealed not only from experimental contact angle measurements but also from simulated contact angle measurements using MDS. The hydrophilic surface state developed at oxidized pyrite surfaces has been described by MDS, on which basis the surface state is explained based on interfacial water structure. The Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences (BES), of the DOE funded work performed by Liem X. Dang. Battelle operates the Pacific Northwest National Laboratory for DOE. The calculations were carried out using computer resources provided by BES.

  4. Coupled modeling of land hydrology–regional climate including human carbon emission and water exploitation

    Directory of Open Access Journals (Sweden)

    Zheng-Hui Xie

    2017-06-01

    Full Text Available Carbon emissions and water use are two major kinds of human activities. To reveal whether these two activities can modify the hydrological cycle and climate system in China, we conducted two sets of numerical experiments using regional climate model RegCM4. In the first experiment used to study the climatic responses to human carbon emissions, the model were configured over entire China because the impacts of carbon emissions can be detected across the whole country. Results from the first experiment revealed that near-surface air temperature may significantly increase from 2007 to 2059 at a rate exceeding 0.1 °C per decade in most areas across the country; southwestern and southeastern China also showed increasing trends in summer precipitation, with rates exceeding 10 mm per decade over the same period. In summer, only northern China showed an increasing trend of evapotranspiration, with increase rates ranging from 1 to 5 mm per decade; in winter, increase rates ranging from 1 to 5 mm per decade were observed in most regions. These effects are believed to be caused by global warming from human carbon emissions. In the second experiment used to study the effects of human water use, the model were configured over a limited region—Haihe River Basin in the northern China, because compared with the human carbon emissions, the effects of human water use are much more local and regional, and the Haihe River Basin is the most typical region in China that suffers from both intensive human groundwater exploitation and surface water diversion. We incorporated a scheme of human water regulation into RegCM4 and conducted the second experiment. Model outputs showed that the groundwater table severely declined by ∼10 m in 1971–2000 through human groundwater over-exploitation in the basin; in fact, current conditions are so extreme that even reducing the pumping rate by half cannot eliminate the groundwater depletion cones observed in the area

  5. Protons migrate along interfacial water without significant contributions from jumps between ionizable groups on the membrane surface

    Science.gov (United States)

    Springer, Andreas; Hagen, Volker; Cherepanov, Dmitry A.; Antonenko, Yuri N.; Pohl, Peter

    2011-01-01

    Proton diffusion along membrane surfaces is thought to be essential for many cellular processes such as energy transduction. Commonly, it is treated as a succession of jumps between membrane-anchored proton-binding sites. Our experiments provide evidence for an alternative model. We released membrane-bound caged protons by UV flashes and monitored their arrival at distant sites by fluorescence measurements. The kinetics of the arrival is probed as a function of distance for different membranes and for different water isotopes. We found that proton diffusion along the membrane is fast even in the absence of ionizable groups in the membrane, and it decreases strongly in D2O as compared to H2O. We conclude that the fast proton transport along the membrane is dominated by diffusion via interfacial water, and not via ionizable lipid moieties. PMID:21859952

  6. Water wells' exploitation and its impact on the drying up of foggaras

    Science.gov (United States)

    Mohamed, Bensaada; Remini, Boualem

    2017-03-01

    For a long time, man had to explore groundwater by constructing special hydraulic works. Thus, in ancient times, hydraulic civilizations such as the foggaras in Iran, Egypt, China and Latin America were born. In the Algerian Sahara, the foggara has played a leading role in the field of abstraction of groundwater distribution and sharing through formal and strict rules. Today, this technique has been disappearing and drying up. This decline does not only increase year by year, there were over a thousand foggaras in the early 1960s, but today only 915 foggaras have been listed for all those regions. Among the factors favoring the decline of foggara is the exploitation of water by deep holes drilled near the latter. In this article, we try to show the impact of drilling on the foggara.

  7. Simultaneous determination of interfacial molarities of amide bonds, carboxylate groups, and water by chemical trapping in micelles of amphiphiles containing peptide bond models.

    Science.gov (United States)

    Zhang, Yongliang; Romsted, Laurence S; Zhuang, Lanzhen; de Jong, Sander

    2013-01-15

    Chemical trapping is a powerful approach for obtaining experimental estimates of interfacial molarities of weakly basic nucleophiles in the interfacial regions of amphiphile aggregates. Here, we demonstrate that the chemical probe 4-hexadecyl-2,6-dimethylbenzenediazonium ion (16-ArN(2)(+)) reacts competitively with interfacial water, with the amide carbonyl followed by cleavage of the headgroups from the tail at the amide oxygen, and with the terminal carboxylate groups in micelles of two N-acyl amino-acid amphiphiles, sodium N-lauroylsarcosinate (SLS) and sodium N-lauroylglycinate (SLG), simple peptide bond model amphiphiles. Interfacial molarities (in moles per liter of interfacial volume) of these three groups were obtained from product yields, assuming that selectivity toward a particular nucleophile compared to water is the same in an aqueous reference solution and in the interfacial region. Interfacial carboxylate group molarities are ~1.5 M in both SLS and SLG micelles, but the concentration of the amide carbonyl for SLS micelles is ~4.6-5 times less (ca. 0.7 M) than that of SLG micelles (~3 M). The proton on the secondary N of SLG helps solubilize the amide bond in the aqueous region, but the methyl on the tertiary N of SLS helps solubilize the amide bond in the micellar core, reducing its reaction with 16-ArN(2)(+). Application of chemical trapping to proteins in membrane mimetic interfaces should provide insight into the topology of the protein within the interface because trapping of the amide carbonyl and cleavage at the C-N bond occurs only within the interface, and fragment characterization marks those peptide bonds located within the interface.

  8. High-flux water desalination with interfacial salt sieving effect in nanoporous carbon composite membranes

    CERN Document Server

    Chen, Wei; Zhang, Qiang; Fan, Zhongli; Huang, Kuo-Wei; Zhang, Xixiang; Lai, Zhiping; Sheng, Ping

    2016-01-01

    Nanoporous carbon composite membranes, comprising a layer of porous carbon fiber structures with an average channel width of 30-60 nm grown on a porous ceramic substrate, are found to exhibit robust desalination effect with high freshwater flux. In three different membrane processes of vacuum membrane distillation, reverse osmosis and forward osmosis, the carbon composite membrane showed 100% salt rejection with 3.5 to 20 times higher freshwater flux compared to existing polymeric membranes. Thermal accounting experiments found that at least 80% of the freshwater pass through the carbon composite membrane with no phase change. Molecular dynamics simulations revealed a unique salt rejection mechanism. When seawater is interfaced with either vapor or the surface of carbon, one to three interfacial atomic layers contain no salt ions. Below the liquid entry pressure, the salt solution is stopped at the openings to the porous channels and forms a meniscus, while the surface layer of freshwater can feed the surface...

  9. Characterization of interfacial waves and pressure drop in horizontal oil-water core-annular flows

    Science.gov (United States)

    Tripathi, Sumit; Tabor, Rico F.; Singh, Ramesh; Bhattacharya, Amitabh

    2017-08-01

    We study the transportation of highly viscous furnace-oil in a horizontal pipe as core-annular flow (CAF) using experiments. Pressure drop and high-speed images of the fully developed CAF are recorded for a wide range of flow rate combinations. The height profiles (with respect to the centerline of the pipe) of the upper and lower interfaces of the core are obtained using a high-speed camera and image analysis. Time series of the interface height are used to calculate the average holdup of the oil phase, speed of the interface, and the power spectra of the interface profile. We find that the ratio of the effective velocity of the annular fluid to the core velocity, α , shows a large scatter. Using the average value of this ratio (α =0.74 ) yields a good estimate of the measured holdup for the whole range of flow rate ratios, mainly due to the low sensitivity of the holdup ratio to the velocity ratio. Dimensional analysis implies that, if the thickness of the annular fluid is much smaller than the pipe radius, then, for the given range of parameters in our experiments, the non-dimensional interface shape, as well as the non-dimensional wall shear stress, can depend only on the shear Reynolds number and the velocity ratio. Our experimental data show that, for both lower and upper interfaces, the normalized power spectrum of the interface height has a strong dependence on the shear Reynolds number. Specifically, for low shear Reynolds numbers, interfacial modes with large wavelengths dominate, while, for large shear Reynolds numbers, interfacial modes with small wavelengths dominate. Normalized variance of the interface height is higher at lower shear Reynolds numbers and tends to a constant with increasing shear Reynolds number. Surprisingly, our experimental data also show that the effective wall shear stress is, to a large extent, proportional to the square of the core velocity. Using the implied scalings for the holdup ratio and wall shear stress, we can derive

  10. Water Assisted Growth of C60 Rods and Tubes by Liquid–Liquid Interfacial Precipitation Method

    Directory of Open Access Journals (Sweden)

    Cheuk-Wai Tai

    2012-06-01

    Full Text Available C60 nanorods with hexagonal cross sections are grown using a static liquid–liquid interfacial precipitation method in a system of C60/m-dichlorobenzene solution and ethanol. Adding water to the ethanol phase leads instead to C60 tubes where both length and diameter of the C60 tubes can be controlled by the water content in the ethanol. Based on our observations we find that the diameter of the rods/tubes strongly depends on the nucleation step. We propose a liquid-liquid interface growth model of C60 rods and tubes based on the diffusion rate of the good C60 containing solvent into the poor solvent as well as on the size of the crystal seeds formed at the interface between the two solvents. The grown rods and tubes exhibit a hexagonal solvate crystal structure with m-dichlorobenzene solvent molecules incorporated into the crystal structure, independent of the water content. An annealing step at 200 °C at a pressure < 1 kPa transforms the grown structures into a solvent-free face centered cubic structure. Both the hexagonal and the face centered cubic structures are very stable and neither morphology nor structure shows any signs of degradation after three months of storage.

  11. Putting Man in the Machine: Exploiting Expertise to Enhance Multiobjective Design of Water Supply Monitoring Network

    Science.gov (United States)

    Bode, F.; Nowak, W.; Reed, P. M.; Reuschen, S.

    2016-12-01

    Drinking-water well catchments need effective early-warning monitoring networks. Groundwater water supply wells in complex urban environments are in close proximity to a myriad of potential industrial pollutant sources that could irreversibly damage their source aquifers. These urban environments pose fiscal and physical challenges to designing monitoring networks. Ideal early-warning monitoring networks would satisfy three objectives: to detect (1) all potential contaminations within the catchment (2) as early as possible before they reach the pumping wells, (3) while minimizing costs. Obviously, the ideal case is nonexistent, so we search for tradeoffs using multiobjective optimization. The challenge of this optimization problem is the high number of potential monitoring-well positions (the search space) and the non-linearity of the underlying groundwater flow-and-transport problem. This study evaluates (1) different ways to effectively restrict the search space in an efficient way, with and without expert knowledge, (2) different methods to represent the search space during the optimization and (3) the influence of incremental increases in uncertainty in the system. Conductivity, regional flow direction and potential source locations are explored as key uncertainties. We show the need and the benefit of our methods by comparing optimized monitoring networks for different uncertainty levels with networks that seek to effectively exploit expert knowledge. The study's main contributions are the different approaches restricting and representing the search space. The restriction algorithms are based on a point-wise comparison of decision elements of the search space. The representation of the search space can be either binary or continuous. For both cases, the search space must be adjusted properly. Our results show the benefits and drawbacks of binary versus continuous search space representations and the high potential of automated search space restriction

  12. Emulsions for interfacial filtration.

    Energy Technology Data Exchange (ETDEWEB)

    Grillet, Anne Mary; Bourdon, Christopher Jay; Souza, Caroline Ann; Welk, Margaret Ellen; Hartenberger, Joel David; Brooks, Carlton, F.

    2006-11-01

    We have investigated a novel emulsion interfacial filter that is applicable for a wide range of materials, from nano-particles to cells and bacteria. This technology uses the interface between the two immiscible phases as the active surface area for adsorption of targeted materials. We showed that emulsion interfaces can effectively collect and trap materials from aqueous solution. We tested two aqueous systems, a bovine serum albumin (BSA) solution and coal bed methane produced water (CBMPW). Using a pendant drop technique to monitor the interfacial tension, we demonstrated that materials in both samples were adsorbed to the liquid-liquid interface, and did not readily desorb. A prototype system was built to test the emulsion interfacial filter concept. For the BSA system, a protein assay showed a progressive decrease in the residual BSA concentration as the sample was processed. Based on the initial prototype operation, we propose an improved system design.

  13. Surfactant-induced flow compromises determination of air-water interfacial areas by surfactant miscible-displacement.

    Science.gov (United States)

    Costanza-Robinson, Molly S; Henry, Eric J

    2017-03-01

    Surfactant miscible-displacement (SMD) column experiments are used to measure air-water interfacial area (AI) in unsaturated porous media, a property that influences solute transport and phase-partitioning. The conventional SMD experiment results in surface tension gradients that can cause water redistribution and/or net drainage of water from the system ("surfactant-induced flow"), violating theoretical foundations of the method. Nevertheless, the SMD technique is still used, and some suggest that experimental observations of surfactant-induced flow represent an artifact of improper control of boundary conditions. In this work, we used numerical modeling, for which boundary conditions can be perfectly controlled, to evaluate this suggestion. We also examined the magnitude of surfactant-induced flow and its impact on AI measurement during multiple SMD flow scenarios. Simulations of the conventional SMD experiment showed substantial surfactant-induced flow and consequent drainage of water from the column (e.g., from 75% to 55% SW) and increases in actual AI of up to 43%. Neither horizontal column orientation nor alternative boundary conditions resolved surfactant-induced flow issues. Even for simulated flow scenarios that avoided surfactant-induced drainage of the column, substantial surfactant-induced internal water redistribution occurred and was sufficient to alter surfactant transport, resulting in up to 23% overestimation of AI. Depending on the specific simulated flow scenario and data analysis assumptions used, estimated AI varied by nearly 40% and deviated up to 36% from the system's initial AI. We recommend methods for AI determination that avoid generation of surface-tension gradients and urge caution when relying on absolute AI values measured via SMD. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Interfacial structure in thin water layers formed by forced dewetting on self-assembled monolayers of omega-terminated alkanethiols on Ag.

    Science.gov (United States)

    Tiani, Domenic J; Yoo, Heemin; Mudalige, Anoma; Pemberton, Jeanne E

    2008-12-02

    A method for the spectroscopic characterization of interfacial fluid molecular structure near solid substrates is reported. The thickness and interfacial molecular structure of residual ultrathin D20 films remaining after forced dewetting on alkanethiolate self-assembled monolayers (SAMs) of 11 1-mercaptoundecanoic acid (11-MUA), 11-mercaptoundecanol (11-MUD), and undecanethiol (UDT) on Ag are investigated using ellipsometry and surface Raman spectroscopy. The residual film thickness left after withdrawal is greater on hydrophilic SAMs than on hydrophobic SAMs. This behavior is rationalized on the basis of differing degrees of fluid slip within the interfacial region due to different interfacial molecular structure. The v(O-D) regions of surface Raman spectra clearly indicate unique interfacial molecular properties within these films that differ from bulk D20. Although the residual films are created by shear forces and Marangoni flow at the three-phase line during the forced dewetting process, the nature of the films sampled optically must also be considered from the standpoint of thin film stability after dewetting. Thus, the resulting D20 films exist in vastly different morphologies depending on the nature of the water-SAM interactions. Residual D20 is proposed to exist as small nanodroplets on UDT surfaces due tospontaneous rupture of the film after dewetting. In contrast, on 11-MUD and 11-MUA surfaces, these films exist in a metastable state that retains their conformal nature on the underlying modified surface. Analysis of the peak intensity ratios of the so-called "ice-like" to "liquid-like" v(O-D) modes suggests more ice-like D20 character near 11-MUD surfaces, but more liquid-like character near 11-MUA and UDT surfaces. The creation of residual ultrathin films by forced dewetting is thus demonstrated to be a powerful method for characterizing interfacial molecular structure of fluids near a solid substrate under ambient conditions of temperature and

  15. Water-dependent interfacial transition zone in resin-modified glass-ionomer cement/dentin interfaces.

    Science.gov (United States)

    Tay, F R; Sidhu, S K; Watson, T F; Pashley, D H

    2004-08-01

    The function of the interfacial transition zone (absorption layer) in resin-modified glass-ionomer cements bonded to deep dentin remains obscure. This study tested the hypotheses that the absorption layer is formed only in the presence of water derived from hydrated dentin and allows for better bonding of resin-modified glass-ionomer cements to dentin. Ten percent polyacrylic acid-conditioned, hydrated, and dehydrated deep dentin specimens were bonded with 2 resin-modified glass-ionomer cements and sealed with resins to prevent environmental water gain or loss. A non-particulate absorption layer was identified over hydrated dentin only, and was clearly discernible from the hybrid layer when bonded interfaces were examined with transmission electron microscopy. This layer was relatively more resistant to dehydration stresses, and remained intact over the dentin surface after tensile testing. The absorption layer mediates better bonding of resin-modified glass-ionomer cements to deep dentin, and functions as a stress-relieving layer to reduce stresses induced by desiccation and shrinkage.

  16. Interfacial Adsorption of Neutral and Ionic Solutes in a Water Droplet.

    Science.gov (United States)

    Wise, Patrick K; Ben-Amotz, Dor

    2018-01-05

    Direct (solute-water) and indirect (water-water) contributions to adsorption at an air-water interface are identified using the Widom potential distribution theorem and quantified using molecular dynamics simulations of a liquid water droplet containing either neopentane or iodide-like solutes with charges of 0 or ±1. The results are used to quantitatively compare direct and indirect energetic and entropic contributions to adsorption, as well as to critically test surface capillary wave, linear response (LR), and mean field (MF) predictions. The negative signs of the total adsorption energies and entropies of both the anionic and cationic solutes are found to result from indirect adsorption induced changes in water-water interactions, rather than from surface capillary wave perturbations, which are found to be asymmetric with respect to solute charge. The LR and MF approximations both accurately describe the adsorption of neutral (hydrophobic) solutes, while for ionic solutes the MF approximation is entirely inappropriate and LR predictions are qualitatively (but not quantitatively) accurate.

  17. Heat radiation vs air drying to remove interfacial water from self-etch adhesives

    Directory of Open Access Journals (Sweden)

    Mathews Irene

    2008-01-01

    Full Text Available The clinician′s quest for time-saving and technique-insensitive technology has led to the development of simplified self-etch adhesives that are predominantly water or solvent based. Several studies have shown that conventional air-drying procedures are incapable of eliminating all the residual water in the adhesive and that it may even cause collapse of the underlying collagen matrix. We hypothesized that heat from a light source may be effective in removing water from these adhesives. The aim of this study was, therefore, to evaluate the effectiveness of heat vs conventional air drying in eliminating water droplets from self-etch adhesive. A self-etch adhesive was applied to bur-cut dentin surfaces, which were then allotted to one of two treatment procedures for eliminating residual water from the adhesive: conventional air drying or the experimental heat application. Specimens were then prepared and analyzed using SEM. Specimens in the experimental group showed no evidence of water treeing within the adhesive layer. Thus, it was concluded that heat radiation was an effective method to remove residual water from simplified adhesives.

  18. Use of Surfactants to Decrease Air-Water Interfacial Tension During Sparging (OKC, OK)

    Science.gov (United States)

    Air sparging is a remediation procedure of injecting air into polluted ground water. The primary intention of air sparging is to promote biodegradation of volatile organic compounds (VOCs) in the groundwater passing through the treatment sector. Sparging treatment efficiency dep...

  19. Use of Surfactants to Decrease Air-Water Interfacial Tension During Sparging

    Science.gov (United States)

    Air sparging is a remediation procedure of injecting air into polluted ground water. The primary intention of air sparging is to promote biodegradation of volatile organic compounds (VOCs) in the groundwater passing through the treatment sector. Sparging treatment efficiency dep...

  20. Supercooled interfacial water in fine-grained soils probed by dielectric spectroscopy

    Directory of Open Access Journals (Sweden)

    A. Lorek

    2013-12-01

    Full Text Available Water substantially affects nearly all physical, chemical and biological processes on the Earth. Recent Mars observations as well as laboratory investigations suggest that water is a key factor of current physical and chemical processes on the Martian surface, e.g. rheological phenomena. Therefore it is of particular interest to get information about the liquid-like state of water on Martian analogue soils for temperatures below 0 °C. To this end, a parallel plate capacitor has been developed to obtain isothermal dielectric spectra of fine-grained soils in the frequency range from 10 Hz to 1.1 MHz at Martian-like temperatures down to −70 °C. Two Martian analogue soils have been investigated: a Ca-bentonite (specific surface of 237 m2 g−1, up to 9.4% w / w gravimetric water content and JSC Mars 1, a volcanic ash (specific surface of 146 m2 g−1, up to 7.4% w / w. Three soil-specific relaxation processes are observed in the investigated frequency–temperature range: two weak high-frequency processes (bound or hydrated water as well as ice and a strong low-frequency process due to counter-ion relaxation and the Maxwell–Wagner effect. To characterize the dielectric relaxation behaviour, a generalized fractional dielectric relaxation model was applied assuming three active relaxation processes with relaxation time of the ith process modelled with an Eyring equation. The real part of effective complex soil permittivity at 350 kHz was used to determine ice and liquid-like water content by means of the Birchak or CRIM equation. There are evidence that bentonite down to −70 °C has a liquid-like water content of 1.17 monolayers and JSC Mars 1 a liquid-like water content of 1.96 monolayers.

  1. Correlation of Oil-Water and Air-Water Contact Angles of Diverse Silanized Surfaces and Relationship to Fluid Interfacial Tensions

    Energy Technology Data Exchange (ETDEWEB)

    Grate, Jay W.; Dehoff, Karl J.; Warner, Marvin G.; Pittman, Jonathan W.; Wietsma, Thomas W.; Zhang, Changyong; Oostrom, Martinus

    2012-02-24

    The use of air-water, {Theta}{sub wa}, or air-liquid contact angles is customary in surface science, while oil-water contact angles {Theta}{sub ow}, are of paramount importance in subsurface multiphase flow phenomena including petroleum reocovery, nonaqueous phase liquid fate and transport, and geological carbon sequestration. In this paper we determine both the air-water and oil-water contact angles of silica surfaces modified with a diverse selection of silanes, using hexadecane as the oil. The silanes included alkylsilanes, alkylarylsilanes, and silanes with alkyl or aryl groups that are functionalized with heteroatoms such as N, O, and S. These silanes yielded surfaces with wettabilities from water-wet to oil wet, including specific silanized surfaces functionalized with heteroatoms that yield intermediate wet surfaces. The oil-water contact angles for clean and silanized surfaces, excluding one partially fluorinated surface, correlate linearly with air-water contact angles with a slope of 1.41 (R = 0.981, n = 13). These data were used to examine a previously untested theoretical treatment relating air-water and oil-water contact angles in terms of fluid interfacial energies. Plotting the cosines of these contact angles against one another, we obtain a linear relationship in excellent agreement with the theoretical treatment; the data fit cos {Theta}{sub ow} = 0.667 cos {Theta}{sub ow} + 0.384 (R = 0.981, n = 13), intercepting cos {Theta}{sub ow} = -1 at -0.284. The theoretical slope, based on the fluid interfacial tensions {Theta}{sub wa}, {Theta}{sub ow}, and {Theta}{sub oa}, is 0.67. We also demonstrate how silanes can be used to alter the wettability of the interior of a pore network micromodel device constructed in silicon/silica with a glass cover plate. Such micromodels are used to study multiphase flow phenomena. The contact angle of the resulting interior was determined in situ. An intermediate wet micromodel gave a contact angle in excellent agreement

  2. Thermally induced gelling of oil-in-water emulsions comprising partially crystallized droplets: the impact of interfacial crystals.

    Science.gov (United States)

    Thivilliers, Florence; Laurichesse, Eric; Saadaoui, Hassan; Leal-Calderon, Fernando; Schmitt, Véronique

    2008-12-02

    We produced triglyceride-in-water emulsions comprising partially crystallized droplets, stabilized by a mixture of protein and low molecular weight surfactant. The emulsions were emulsified in the melted state of the oil phase and stored at low temperature (4 degrees C) right after fabrication to induce oil crystallization. The systems were then warmed to room temperature for a short period of time and cooled again to 4 degrees C. Owing to this treatment referred to as temperature cycling or "tempering", the initially fluid emulsions turned into hard gels. We followed the bulk rheological properties of the materials during and after tempering. The storage modulus, G', exhibited a dramatic increase when tempering was applied. We showed that the systems evolved following two distinct regimes that depend on the average droplet size and on the surfactant-to-protein molar ratio. Gelling may involve partial coalescence of the droplets, i.e., film rupturing with no further shape relaxation because of the solid nature of the droplets. Alternatively, gelling may occur without film rupturing, and is reminiscent of a jamming transition induced by surface roughness. We discussed the origin of these two mechanisms in terms of the properties (size and protuberance) of the interfacial oil crystals.

  3. Interfacial electrochemistry of colloidal ruthenium dioxide and catalysis of the photochemical generation of hydrogen from water

    NARCIS (Netherlands)

    Kleijn, J.M.

    1987-01-01

    The formation of hydrogen from water using solar energy is a very attractive research topic, because of the potential use of hydrogen as an alternative, clean fuel. It has been shown by many workers in the field that photochemical hydrogen generation can be achieved in an aqueous system,

  4. Monitoring Interfacial Lipid Oxidation in Oil-in-Water Emulsions Using Spatially Resolved Optical Techniques.

    Science.gov (United States)

    Banerjee, Chiranjib; Westberg, Michael; Breitenbach, Thomas; Bregnhøj, Mikkel; Ogilby, Peter R

    2017-06-06

    The oxidation of lipids is an important phenomenon with ramifications for disciplines that range from food science to cell biology. The development and characterization of tools and techniques to monitor lipid oxidation are thus relevant. Of particular significance in this regard are tools that facilitate the study of oxidations at interfaces in heterogeneous samples (e.g., oil-in-water emulsions, cell membranes). In this article, we establish a proof-of-principle for methods to initiate and then monitor such oxidations with high spatial resolution. The experiments were performed using oil-in-water emulsions of polyunsaturated fatty acids (PUFAs) prepared from cod liver oil. We produced singlet oxygen at a point near the oil-water interface of a given PUFA droplet in a spatially localized two-photon photosensitized process. We then followed the oxidation reactions initiated by this process with the fluorescence-based imaging technique of structured illumination microscopy (SIM). We conclude that the approach reported herein has attributes well-suited to the study of lipid oxidation in heterogeneous samples.

  5. Interfacial forces in aqueous media

    CERN Document Server

    van Oss, Carel J

    2006-01-01

    Thoroughly revised and reorganized, the second edition of Interfacial Forces in Aqueous Media examines the role of polar interfacial and noncovalent interactions among biological and nonbiological macromolecules as well as biopolymers, particles, surfaces, cells, and both polar and apolar polymers. The book encompasses Lifshitz-van der Waals and electrical double layer interactions, as well as Lewis acid-base interactions between colloidal entities in polar liquids such as water. New in this Edition: Four previously unpublished chapters comprising a new section on interfacial propertie

  6. An interfacial shear term evaluation study for adiabatic dispersed air–water two-phase flow with the two-fluid model using CFD

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, S.L., E-mail: sharma55@purdue.edu [School of Nuclear Engineering, Purdue University, West Lafayette, IN (United States); Hibiki, T.; Ishii, M. [School of Nuclear Engineering, Purdue University, West Lafayette, IN (United States); Schlegel, J.P. [Department of Mining and Nuclear Engineering, Missouri University of Science and Technology, Rolla, MO (United States); Buchanan, J.R.; Hogan, K.J. [Bettis Laboratory, Naval Nuclear Laboratory, West Mifflin, PA (United States); Guilbert, P.W. [ANSYS UK Ltd, Oxfordshire (United Kingdom)

    2017-02-15

    Highlights: • Closure form of the interfacial shear term in three-dimensional form is investigated. • Assessment against adiabatic upward bubbly air–water flow data using CFD. • Effect of addition of the interfacial shear term on the phase distribution. - Abstract: In commercially available Computational Fluid Dynamics (CFD) codes such as ANSYS CFX and Fluent, the interfacial shear term is missing in the field momentum equations. The derivation of the two-fluid model (Ishii and Hibiki, 2011) indicates the presence of this term as a momentum source in the right hand side of the field momentum equation. The inclusion of this term is considered important for proper modeling of the interfacial momentum coupling between phases. For separated flows, such as annular flow, the importance of the shear term is understood in the one-dimensional (1-D) form as the major mechanism by which the wall shear is transferred to the gas phase (Ishii and Mishima, 1984). For gas dispersed two-phase flow CFD simulations, it is important to assess the significance of this term in the prediction of phase distributions. In the first part of this work, the closure of this term in three-dimensional (3-D) form in a CFD code is investigated. For dispersed gas–liquid flow, such as bubbly or churn-turbulent flow, bubbles are dispersed in the shear layer of the continuous phase. The continuous phase shear stress is mainly due to the presence of the wall and the modeling of turbulence through the Boussinesq hypothesis. In a 3-D simulation, the continuous phase shear stress can be calculated from the continuous fluid velocity gradient, so that the interfacial shear term can be closed using the local values of the volume fraction and the total stress of liquid phase. This form also assures that the term acts as an action-reaction force for multiple phases. In the second part of this work, the effect of this term on the volume fraction distribution is investigated. For testing the model two

  7. Hydrophobic but hygroscopic polymer films--identifying interfacial species and understanding water ingress behavior.

    Science.gov (United States)

    Hsiao, Erik; Barnette, Anna L; Bradley, Laura C; Kim, Seong H

    2011-11-01

    The hydrophobic but hygroscopic nature of polydimethylsiloxane (PDMS) with quaternary ammonium cationic side chains adsorbed on a SiO(2) surface was investigated with sum frequency generation vibration spectroscopy (SFG) and attenuated total reflectance infrared spectroscopy (ATR-IR). PDMS with cationic side chains, named cationic polymer lubricant (CPL), forms a self-healing boundary lubrication film on SiO(2). It is interesting that CPL films are externally hydrophobic but internally hydrophilic. The comparison of SFG and ATR-IR data revealed that the methyl groups of the PDMS backbone are exposed at the film/air interface and the cationic side groups and counterions are embedded within the film. The hydrophobicity must originate from the surface CH(3) groups, while the ionic groups inside the film must be responsible for water uptake. The surface hydrophobicity can alleviate the capillary adhesion while the hygroscopic property enhances the mobility and self-healing capability of the CPL boundary lubrication film.

  8. Micellization and interfacial behavior of imidazolium-based ionic liquids in organic solvent-water mixtures.

    Science.gov (United States)

    Pino, Verónica; Yao, Cong; Anderson, Jared L

    2009-05-15

    The surface and micellar properties of aqueous solutions of two imidazolium-based ionic liquids (ILs), 1-hexadecyl-3-butylimidazolium bromide (HDBIm-Br) and 1,3-didodecylimidazolium bromide (DDDDIm-Br), are examined in the presence of several organic solvents by surface tensiometry. The organic solvents studied include methanol, 1-propanol, 1-butanol, 1-pentanol, and acetonitrile. Increases in the critical micelle concentration (cmc) values were obtained for both ILs when increasing the organic solvent content with a more significant increase observed for the DDDDIm-Br IL. For both ILs, decreases in the maximum surface excess concentration (Gamma(max)), increases in the minimum surface area per surfactant molecule (A(min)), decreases in the adsorption efficiency (pC(20)), and decreases in the effectiveness of surface tension reduction (Pi(cmc)) were obtained when increasing the organic solvent content. However, the studied organic solvents affect the surface tension at the cmc (gamma(cmc)) differently; generating increases for DDDDIm-Br and decreases for HDBIm-Br. These changes can be linked to the different water-air interface orientation of both ILs in aqueous solutions free of organic solvents. Linear correlations between the extent of the change in these parameters when increasing the alkyl-chain of the alcohol modifier were also observed. A preliminary study of the utilization of HDBIm-Br in micellar-liquid chromatography (MLC) is also presented, demonstrating the applicability of the IL-aggregates in this analytical technique.

  9. Beneath Still Waters - Multistage Aquatic Exploitation of Euryale ferox (Salisb. during the Acheulian

    Directory of Open Access Journals (Sweden)

    Naama Goren-Inbar1

    2014-09-01

    Full Text Available Remains of the highly nutritious aquatic plant Fox nut – Euryale ferox Salisb. (Nymphaeaceae – were found at the Acheulian site of Gesher Benot Ya'aqov, Israel. Here, we present new evidence for complex cognitive strategies of hominins as seen in their exploitation of E. ferox nuts. We draw on excavated data and on parallels observed in traditional collecting and processing practices from Bihar, India. We suggest that during the early Middle Pleistocene, hominins implemented multistage procedures comprising underwater gathering and subsequent processing (drying, roasting and popping of E. ferox nuts. Hierarchical processing strategies are observed in the Acheulian lithic reduction sequences and butchering of game at this and other sites, but are poorly understood as regards the exploitation of aquatic plant resources. We highlight the ability of Acheulian hominins to resolve issues related to underwater gathering of E. ferox nuts during the plant's life cycle and to adopt strategies to enhance their nutritive value.

  10. Mechanical Characterization of Ultralow Interfacial Tension Oil-in-Water Droplets by Thermal Capillary Wave Analysis in a Microfluidic Device.

    Science.gov (United States)

    Bolognesi, Guido; Saito, Yuki; Tyler, Arwen I I; Ward, Andrew D; Bain, Colin D; Ces, Oscar

    2016-04-19

    Measurements of the ultralow interfacial tension and surfactant film bending rigidity for micron-sized heptane droplets in bis(2-ethylhexyl) sodium sulfosuccinate-NaCl aqueous solutions were performed in a microfluidic device through the analysis of thermally driven droplet interface fluctuations. The Fourier spectrum of the stochastic droplet interface displacement was measured through bright-field video microscopy and a contour analysis technique. The droplet interfacial tension, together with the surfactant film bending rigidity, was obtained by fitting the experimental results to the prediction of a capillary wave model. Compared to existing methods for ultralow interfacial tension measurements, this contactless, nondestructive, all-optical approach has several advantages, such as fast measurement, easy implementation, cost-effectiveness, reduced amount of liquids, and integration into lab-on-a-chip devices.

  11. Impact of oil type and WPI/Tween 80 ratio at the oil-water interface: Adsorption, interfacial rheology and emulsion features.

    Science.gov (United States)

    Gomes, Andresa; Costa, Ana Letícia Rodrigues; Cunha, Rosiane Lopes

    2018-01-31

    The relationship between the composition and structure of food emulsions was evaluated from the effect of a mixture of emulsifiers Whey protein (WPI) - Tween 80 (T80) and the oil phase features, such as chain length and unsaturation degree (sunflower oil, a long chain triacylglycerol - LCT or NEOBEE ® 1053, a medium chain triacylglycerol - MCT). Emulsions with LCT showed higher droplet size than MCT as a consequence of its higher viscosity. All emulsions exhibited shear thinning behavior, but the viscosity was influenced by their interface composition. An occurrence of the destabilization mechanism by creaming was observed in turbidimetric measurements, but no visual phase separation could be observed, indicating a good kinetic stability after a 7-day storage. The initial interfacial tension of the water-LCT or water-MCT oil was about 25 mN/m, but the WPI addition (1% w/w) reduced the initial interfacial tension to approximately 20 mN/m. The increase of T80 concentration led to a decrease of the interfacial tension, reaching a value around 10 mN/m in systems with pure T80. The curves of interfacial tension of systems with LCT or MCT showed differences in the decay rate of tension over time. These differences were attributed to characteristics of the oil phase (hydrophobicity, unsaturation degree, presence of impurities) and the different proportions of each emulsifier within the mixture of emulsifiers. Finally, a higher viscoelastic interface was observed in LCT emulsions, which were mainly stabilized by WPI molecules. Such molecules presented a higher resistance to the displacement due to the competitive adsorption phenomenon, since the LCT is a more hydrophobic oil. On the other hand, the interface with MCT and a higher T80 concentration was less viscoelastic due to an easier displacement of WPI from the interface and the replacement by T80. The results indicate that T80 can be used in combination with WPI to produce emulsions with good stability and lower

  12. Surface force and vibrational spectroscopic analyses of interfacial water molecules in the vicinity of methoxy-tri(ethylene glycol)-terminated monolayers: mechanisms underlying the effect of lateral packing density on bioinertness.

    Science.gov (United States)

    Sekine, Taito; Asatyas, Syifa; Sato, Chikako; Morita, Shigeaki; Tanaka, Masaru; Hayashi, Tomohiro

    Unequivocal dependence of bioinertness of self-assembled monolayers of methoxy-tri(ethylene glycol)-terminated alkanethiol (EG3-OMe SAMs) on their packing density has been a mystery for more than two decades. We tackled this long-standing question by performing surface force and surface-enhanced infrared absorption (SEIRA) spectroscopic measurements. Our surface force measurements revealed a physical barrier of interfacial water in the vicinity of the Au-supported EG3-OMe SAM (low packing density), whereas the Ag-supported one (high packing density) did not possess such interfacial water. In addition, the results of SEIRA measurements clearly exhibited that hydrogen bonding states of the interfacial water differ depending on the substrates. We also characterized the bioinertness of these SAMs by protein adsorption tests and adhesion assays of platelet and human umbilical vein endothelial cells. The hydrogen bonding states of the interfacial water and water-induced interaction clearly correlated with the bioinertness of the SAMs, suggesting that the interfacial water plays an important role determining the interaction of the SAMs with biomolecules and cells.

  13. Model or Myopia? Exploiting Water Markets to Address Population and Drought Risks in a Changing World

    Science.gov (United States)

    Reed, P. M.

    2012-12-01

    Climate change, population demands, and evolving land-use represent strong risks to the sustainable development and stability of world-wide urban water supplies. There is a growing consensus that non-structural supply management instruments such as water markets have significant potential to reduce the risks and vulnerabilities in complex urban water systems. This paper asks a common question, what are the tradeoffs for a city using water market supply instruments?. This question emerges quickly in policy and management, but its answer is deceptively difficult to attain using traditional planning tools and management frameworks. This research demonstrates new frameworks that facilitate rapid evaluation of hypotheses on the reliability, resiliency, adaptability, and cost-effectiveness of urban water supply systems. This study considers a broader exploration of the issues of "nonstationarity" and "uncertainty" in urban water planning. As we invest in new information and prediction frameworks for the coupled human-natural systems that define our water, our problem definitions (i.e., objectives, constraints, preferences, and hypotheses) themselves evolve. From a formal mathematical perspective, this means that our management problems are structurally uncertain and nonstationary (i.e., the definition of optimality changes across regions, times, and stakeholders). This uncertainty and nonstationarity in our problem definitions needs to be more explicitly acknowledged in adaptive management and integrated water resources management. This study demonstrates the potential benefits of exploring these issues in the context of a city in the Lower Rio Grande Valley (LRGV) of Texas, USA determining how to use its regional water market to manage population and drought risks.

  14. EXPLOITATION AND CATCH FLUCTUATION OF SMALL PELAGIC FISHES IN PRIGI WATERS, SOUTH COAST OF JAVA

    Directory of Open Access Journals (Sweden)

    Suwarso Suwarso

    2014-12-01

    Full Text Available Studies on the exploitation and catch fluctuations of pelagic fishes have been undertaken in order to understand the fishery systems, annual and seasonal change of fishing effort and catches, as well as species composition. The study was based on the daily monitoring data of the purse seiners. The results showed that generally the fishing activities is one day fishing, the increase of fishing effort reflected in the number of fishing units and the number of trip, while the trend of production and catch rate were fluctuated by either annual or seasonal; the peak of catch rate was occurred in 2007, 2008 and 2012 periods, during December to June were low catches, and are going in the peak season in September-October. The lowest catch rate is about 100kg/trip and the maximum of 4.3 tons/trip (the average of 1.3 tons/trip, however the fail of fishing was often occurs and reached 30% of the total number of trips; the failed fishing was decline from year to year. The catch rate (kg/trip/day was showed a pattern fluctuations; the small pelagic fish mainly the scads (Decapterus spp. and clupeids (Bali sardine, Sardinella lemuru, respectively 33% and17%, whereas the dominan large pelagic fish is ‘tongkol’/frigate tuna (Auxis thazzard. The changes of species domination was occurred either in annually or seasonally.

  15. Three-Dimensional Visualization of Interfacial Phenomena Using Confocal Microscopy

    Science.gov (United States)

    Shieh, Ian C.

    of the various lipid constituents of lung surfactant. Confocal microscopy allows us to use a water-soluble, cationic fluorophore that partitions into the disordered phases of lipid monolayers. By exploiting the properties of this water-soluble fluorophore, we investigate both the phase behavior and electrostatics of the interfacial lipid systems. Overall, we believe the work presented in this dissertation provides the building blocks for establishing confocal microscopy as a ubiquitous characterization technique in the interfacial and surface sciences.

  16. Modelling Crop Pattern Changes and Water Resources Exploitation: A Case Study

    Directory of Open Access Journals (Sweden)

    Donato Zingaro

    2017-09-01

    Full Text Available Agriculture and farming worldwide are responsible for numerous environmental threats, including degradation of land and water resource depletion. Underlining the dynamic interaction between bio-physical and socio-economic drivers is the key towards a more sustainable land and water management. With regard to a highly-developed agricultural area in Southern Italy, multi-regression models were developed to provide an ex-post interpretation of the observed inter-annual variability of cropped land. The main drivers related to Common Agricultural Policy support, product market prices, crop yield, and irrigation water availability were investigated. The adopted models revealed the different weights of each driver. The findings reported the role that direct payments played in supporting the extension of irrigated crops, such as processing tomato. Likewise, the models pointed out the decoupled payment scheme as the most important driver of change in the crop pattern over the last years.

  17. Exploitation of Sentinel-1A Data in One Year Survey of Water Transfer on Wetlands

    Science.gov (United States)

    Mroz, Marek; Mleczko, Magdalena; Fitrzyk, Magdalena

    2016-08-01

    The main aim of this study was to observe and map inundation in the river valley using Sentinel-1A multitemporal acquisitions for the year-long period starting from the first operational Sentinel-1A acquisitions in October 2014. The open water surface has been clearly identified on the time series of GRD images. The identification of partially flooded vegetation has been possible using Shannon Entropy decomposition. The results of this study can be proposed as the auxiliary materials useful for water management on the Biebrza National Park area.

  18. Effect of Trimethylamine N-Oxide on Interfacial Electrostatics at Phospholipid Monolayer-Water Interfaces and Its Relevance to Cardiovascular Disease.

    Science.gov (United States)

    Mondal, Jahur A

    2016-05-05

    Trimethylamine N-oxide (TMAO), a metabolite of choline containing dietary nutrients which are abundant in red meat, egg, and other animal foods, increases the risk of cardiovascular disease (e.g., atherosclerosis) by boosted accumulation of fatty deposits on artery wall. Hence, for the molecular level elucidation of the pathogenesis of atherosclerosis, it is important to understand the effect of TMAO at the endothelial cell membrane-blood interface (artery wall). Heterodyne-detected vibrational sum frequency generation (HD-VSFG) study of a zwitterionic phosphatidylcholine (PC) lipid monolayer-water interface (mimic of endothelial membrane-blood interface) shows that the interfacial water becomes increasingly H-up oriented in the presence of TMAO in the aqueous phase, revealing a dramatic change in the interfacial electrostatics. Examinations of charged lipid interfaces show that TMAO screens anionic phosphate less effectively than cationic choline, which confirms that TMAO increases the relative influence of the anionic phosphate by preferential screening of the cationic choline at the zwitterionic PC lipid interface where the phosphate and choline groups are simultaneously present. Together, it is conceivable that at an elevated TMAO level in serum would modify the electrostatics at the endothelial cell membrane-blood interface (artery wall), which may affect the influx/efflux of fatty deposits on artery wall, setting the stage for atherosclerosis.

  19. Constraints on the exploitation of basement aquifers in East Africa — water balance implications and the role of the regolith

    Science.gov (United States)

    Howard, Ken W. F.; Karundu, John

    1992-11-01

    Recent hydrogeological studies in southwestern Uganda have focused on the resource potential of crystalline basement rocks of Pre-Cambrian age. These rocks are a major source of potable water for many communities throughout equatorial Africa, but are rarely evaluated hydrogeologically prior to development. Consequently, the risk of resource over-exploitation is not known and few reliable data are available for formulating effective groundwater management policies. The studies show that the basement rocks of the region form a very weak aquifer which is highly susceptible to over-production and water-level decline. Soil zone recharge is normally very low with a median value of just 17 mm year -1. Aquifer throughflow calculations indicate that less than 1% of this amount is transmitted via the bedrock aquifer. As a consequence, future problems may include the lowering of water levels in production wells and the drying up of natural springs. The risk of such problems imposes serious constraints on the bedrock aquifer's future use and development. On a positive note, it is believed that the aquifer within the overlying may be transmitting the considerable majority of the soil-zone recharge and, therefore, may provide the key to future resource development in the region. Development of this aquifer may be achieved either through wells constructed and screened in the regolith's water-bearing zone, or, where conditions permit, through deeper bedrock wells inducing vertical leakage by pumping.

  20. BIO-EXPLOITATION STATUS OF BOMBAY DUCK (Harpadon nehereus HAMILTON, 1822 ON TRAWL FISHERY IN TARAKAN WATERS

    Directory of Open Access Journals (Sweden)

    Duto Nugroho

    2015-06-01

    Full Text Available North Kalimantan Province, notably Tarakan City marine waters, is one of the important fishing ground in boundary area among Sulu Sulawesi Marine Ecoregion. It produces approximately 100 mt/annum of Bombay duck (Harpadon nehereus with valued of US$ 750,000. The sustainability of this fishery is a crucially concern given the following: substantial economic contribution, significant dependence of small-scale fishers on this species for their livelihoods. The fishing intensities considerable and growing threats to their habitats. To evaluate the vulnerability of individual species to over exploitation, the spawning potential ratio (SPR approach applied to describe the status of its existing fisheries. This approach provides the ability to determine fishing mortality as reference points to enhance its sustainability. The objective of this study is to understand this fish biomass resilience to harvesting. The calculated SPR based on the value of estimated length of first capture or Lc at 208 mm is equivalent to the SPR of 28%. With a base line of stocks are generally thought to risk recruitment declining when SPR <20%, recent finding indicated that the existing fishery can be generally described as nearly fully exploited. In recognition of this sector’s has an ecological importance and socio-economic significance, the sustainable development of Bombay duck fisheries should be initiated through developing local fishery committee to provide a their local fishery management plan.

  1. Investigation of the effect of coal particle sizes on the interfacial and rheological properties of coal-water slurry fuels: Final report, July 1, 1994-June 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Kihm, K.D.

    1996-10-01

    The scope of the project is two fold: (1) examining particle size effect on interfacial properties of CWS fuels by measuring static and dynamic surface tension properties of specially prepared CWS samples containing different ranges of coal particle sizes, and (2) studying the effect of particle size on CWS atomization characteristics by measuring mean diameters of several different CWS sprays generated by sonic air blasting. The results show that both static and dynamic surface tensions decrease with increasing coal particle size and mean droplet diameter of CW-S sprays also decreases with increasing coal particle size. Based on the experimental evidence we conjecture that three different energies are competing in slurry atomization: (1) the internal capillary holding between particles and water, (2) the interfacial surface tensile energy at the slurry surface contacting air, and (3) the external air blast shear energy acting against the former two energies. The internal capillary holding force decreases with increasing particle size. This force is believed to play a major role in determining the effect of particle size on CWS atomization.

  2. Morphology and interfacial energetics controls for hierarchical anatase/rutile TiO2 nanostructured array for efficient photoelectrochemical water splitting.

    Science.gov (United States)

    Yang, Jih-Sheng; Liao, Wen-Pin; Wu, Jih-Jen

    2013-08-14

    In this work, a three-dimensional (3D) hierarchical TiO2 nanostructured array is constructed on the basis of the considerations of morphology and interfacial energetics for photoelectrochemical water splitting. The photoelectrode is composed of a core-shell structure where the core portion is a rutile TiO2 nanodendrite (ND) array and the shell portion is rutile and anatase TiO2 nanoparticles (NPs) sequentially located on the surface. The TiO2 ND array provides a fast electron transport pathway due to its quasi-single-crystalline structure. The 3D configuration with NPs in the shell portion provides a larger surface area for more efficient photocharge separation without significantly sacrificing the electron collection efficiency. Moreover, anatase TiO2 NPs constructed on the surface of the ND/rutile TiO2 NP nanostructured array enhance charge separation and suppress charge recombination at the interfacial region due to the higher conduction band edge of anatase TiO2 compared to that of rutile TiO2. A photocurrent density and photoconversion efficiency of 2.08 mA cm(-2) at 1.23 V vs reversible hydrogen electrode (RHE) and 1.13% at 0.51 V vs RHE are, respectively, attained using the hierarchical TiO2 nanostructured array photoelectrochemical cell under illumination of AM 1.5G (100 mW cm(-2)).

  3. ICHTHYOFAUNA OF WATER BODIES OF THE NATIONAL NATURE PARK “TUZLA LAGOONS” AND ITS COMMERCIAL FISHERIES EXPLOITATION

    Directory of Open Access Journals (Sweden)

    P. Shekk

    2015-09-01

    Full Text Available Purpose. To study of the current species diversity of fish fauna in the water bodies included in the National Park “Tuzla lagoons”, to assess the perspectives of their commercial fisheries exploitation. Methodology. Collection of ichthyological material was performed in different seasons of 2011–2014 across the entire area of lagoons and coastal zone of the Black Sea included in the National Nature Park “Tuzla lagoons”. During commercial fish harvest, the material was collected from commercial fishing gear (gillnets, traps, hoop nets, beach seines. In fall, during the work of the fish catch-release channel, we analyzed the data describing the species composition, abundance and length-weight characteristics of fish migrating through the channel in the sea. We used the method of average representative sampling. During the closed period, ichthyologic material for the analysis was collected from the survey fishing gears. All catches were sorted by species composition. We recorded the total catch and the ratio of different species. Collection and processing of data were carried out using generally accepted methods. Findings. It 2011–2014, 72 fish species belonging to 30 families were detected in waters included in the National Nature Park “Tuzla lagoons”: 58 species in the coastal zone of the sea, 28 species in Dzhenshei and Maly Sasyk, 31 species in Tuzla lagoons. Among the fish detected in sea and freshwaters of the National Nature Park “Tuzla lagoons”, 6 species are listed in the Red Book of Ukraine, 7 are protected by Bern Convention, 4 are lusted in the Red List of the International Union for Conservation of Nature and Natural Resources, and 16 species are listed in the Red Book of the Black Sea. Before 2001, a mullet-rearing fish farm operated in Tuzla lagoons. Its fish productivity depended on the intensity and amounts of stocking which were determined by the regime of the work of lagoon–sea channels, state of natural

  4. Vapor-liquid interfacial reaction to fabricate superhydrophilic and underwater superoleophobic thiol-ene/silica hybrid decorated fabric for oil/water separation

    Science.gov (United States)

    Li, Hongqiang; Liang, Tao; Lai, Xuejun; Su, Xiaojing; Zhang, Lin; Zeng, Xingrong

    2018-01-01

    With oil spill accidents and oil industrial wastewater increasing, oil/water separation has attracted much attention in recent years. Herein, we report the fabrication of superhydrophilic and underwater superoleophobic thiol-ene/silica hybrid decorated fabrics for oil/water separation via vapor-liquid interfacial reaction. It is based on sol-gel reaction of tetraethyl orthosilicate (TEOS) to generate silica and thiol-ene reaction between poly(ethylene glycol) dimethacrylate (PEGDMA) and trimethylolpropane tris(3-mercaptopropionate) (TTMP) to form crosslinked hydrophilic polymer on polyester fabric under the catalysis of butylamine/ammonia vapor. The chemical structure of the surfaces on thiol-ene/silica hybrid decorated fabric was confirmed by FTIR and XPS, and obvious micro-nano morphology and roughness were observed with SEM and AFM. The water contact angle of the fabric attained 0° in 0.36 s, and the underwater oil contact angle reached up to 160°. Importantly, the fabric exhibited high separation efficiency at 99.5%, fast water flux above 71600 Lm-2h-1 and excellent recyclability in oil/water separation. Our findings open a new strategy to fabricate organic-inorganic hybrid superhydrophobic and underwater superoleophobic materials for oil/water separation.

  5. Rational design of a bi-layered reduced graphene oxide film on polystyrene foam for solar-driven interfacial water evaporation

    KAUST Repository

    Shi, Le

    2016-12-20

    Solar-driven water evaporation has been emerging as a highly efficient way for utilizing solar energy for clean water production and wastewater treatment. Here we rationally designed and fabricated a bi-layered photothermal membrane with a porous film of reduced graphene oxide (rGO) on the top and polystyrene (PS) foam at the bottom. The top porous rGO layer acts as a light absorber to harvest and convert light efficiently to thermal energy and the bottom PS layer, which purposefully disintegrates water transport channels, acts as an excellent thermal barrier to minimize heat transfer to the nonevaporative bulk water. The optimized bi-layered membrane was able to produce water evaporation rate as high as 1.31 kg m−2 h−1 with light to evaporation conversion efficiency as high as 83%, which makes it a promising photothermal material in the literature. Furthermore, the experiments and theoretical simulation were both conducted to examine the relationship between the overall energy efficiency and the depth of the photothermal material underwater and the experimental and simulations results coincided with each other. Therefore, this work provides systematic evidence in support of the concept of the interfacial heating and shines important light on practical applications of solar-driven processes for clean water production.

  6. Agricultural exploitation impact on the quality of natural waters in the trout-breeding region of the Mantiqueira ecological corridor

    Directory of Open Access Journals (Sweden)

    Gabriele Medeiros dos Santos

    2014-05-01

    Full Text Available Seasonal assessment of water quality was undertaken in an agricultural cattle-raising and trout-breeding region. Seventeen sites were sampled in ten municipalities close to the Papagaio and Ibitipoca State Parks in Minas Gerais, Brazil. Landsat 5 satellite images and Spotmap mosaic images with resolution of 2.5 m were employed to correlate classes of land use and topographic characteristics with the environmental contamination index of the water bodies at these sites. Results show a change in hydric classification of three sites evaluated. During the rainy season, sites 3, 7 and 17 were classified as class 3 according to CONAMA regulations, whereas the other sites were classified as class 2. During the dry season, sites 10 and 11 belonged to class 3 and the others to class 2. Literature and analysis of images and visits on the area showed that the principles of sustainable farming were not being followed in the region. Current research may be a tool for planning the preservation of natural resources. Results indicate there is a need for specific planning for fish farming and agriculture in the region for its sustainable economic exploitation.

  7. Interfacial rheology and emulsion stability in model systems

    CERN Document Server

    Pratt, G

    1998-01-01

    Measurements of thermodynamic interfacial tension sigma at a non-equilibrium surfactant adsorption have been made using a pulsed drop rheometer. The pulsed drop rheometer is based on an instantaneous expansion of a water droplet in oil. After perturbation an interfacial relaxation occurs, the interfacial pressure decay is followed as a function of time using a sensitive pressure transducer. The difference in pressure across a curved interface and the interfacial tension are directly related. Interfacial tension decays can be obtained above and below the surfactants CMC. The interfacial tension decays obtained were fitted to known relaxation mechanisms, and found generally to fit diffusional mechanisms. The funnel technique involves expansion of the interface through a funnel, the interfacial tension decays are followed directly. The results were found to be analogous to measurements made by the pulsed drop. Measurements have been made of the interfacial shear viscosity of a polymeric surfactant at the oil / w...

  8. Interfacial adsorption and surfactant release characteristics of magnetically functionalized halloysite nanotubes for responsive emulsions.

    Science.gov (United States)

    Owoseni, Olasehinde; Nyankson, Emmanuel; Zhang, Yueheng; Adams, Daniel J; He, Jibao; Spinu, Leonard; McPherson, Gary L; Bose, Arijit; Gupta, Ram B; John, Vijay T

    2016-02-01

    Magnetically responsive oil-in-water emulsions are effectively stabilized by a halloysite nanotube supported superparamagnetic iron oxide nanoparticle system. The attachment of the magnetically functionalized halloysite nanotubes at the oil-water interface imparts magnetic responsiveness to the emulsion and provides a steric barrier to droplet coalescence leading to emulsions that are stabilized for extended periods. Interfacial structure characterization by cryogenic scanning electron microscopy reveals that the nanotubes attach at the oil-water interface in a side on-orientation. The tubular structure of the nanotubes is exploited for the encapsulation and release of surfactant species that are typical of oil spill dispersants such as dioctyl sulfosuccinate sodium salt and polyoxyethylene (20) sorbitan monooleate. The magnetically responsive halloysite nanotubes anchor to the oil-water interface stabilizing the interface and releasing the surfactants resulting in reduction in the oil-water interfacial tension. The synergistic adsorption of the nanotubes and the released surfactants at the oil-water interface results in oil emulsification into very small droplets (less than 20μm). The synergy of the unique nanotubular morphology and interfacial activity of halloysite with the magnetic properties of iron oxide nanoparticles has potential applications in oil spill dispersion, magnetic mobilization and detection using magnetic fields. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Water Grabbing in the Cauca Basin: The Capitalist Exploitation of Water and Dispossession of Afro-Descendant Communities

    Directory of Open Access Journals (Sweden)

    Irene Vélez Torres

    2012-06-01

    Full Text Available This article examines water grabbing in the Alto Cauca in Colombia as a form of accumulation through ethnicised and racialised environmental dispossession in the capitalist system. Characterised by privatisation and historical trends of exclusion, this violent accumulation model has shaped a particular form of environmental racism leading to negative impacts experienced in historically marginalised Afro-descendant local communities. Analyzing two development projects in the upper watershed of the Cauca river – the Agua Blanca Irrigation District Project and a Project for Diverting the River Cauca – the article concludes that many actors are responsible for the negative effects of the regional development model. These include the state, national and foreign private companies, and powerful international economic stakeholders.

  10. Redefining Exploitation

    DEFF Research Database (Denmark)

    Agarwala, Rina

    2016-01-01

    -employed workers are organizing as workers. They are fighting labor exploitation by redefining the concept to include additional exploitation axes (from the state and middle class) and forms (including sexual). In doing so, they are redefining potential solutions, including identities and material benefits, to fit...... their unique needs. By expanding the category of “workers” beyond those defined by a narrow focus on a standard employer-employee relationship, these movements are also fighting exclusion from earlier labor protections by increasing the number of entitled beneficiaries. These struggles provide an important...

  11. Positional isomers of linear sodium dodecyl benzene sulfonate: solubility, self-assembly, and air/water interfacial activity.

    Science.gov (United States)

    Ma, Jian-Guo; Boyd, Ben J; Drummond, Calum J

    2006-10-10

    Commercial linear alkyl benzene sulfonates (ABS) are a very important class of anionic surfactants that are employed in a wide variety of applications, especially those involving wetting and detergency. Linear ABS surfactants generally consist of a complex mixture of different chain lengths and positional isomers. This diversity and level of complexity makes it difficult to develop fundamental structure-property correlations for the commercial surfactants. In this work, six monodisperse headgroup positional isomers of sodium para-dodecyl benzene sulfonate (Na-x-DBS, x = 1-6) have been studied. The influence of headgroup position and added electrolyte (NaCl) on the solubility and self-assembly (micellar and vesicular aggregation and lyotropic liquid crystalline phase behavior) in the temperature range from 10 to 90 degrees C have been investigated. Additionally, the air-aqueous solution interfacial adsorption at 25 (no added NaCl) and 50 degrees C (from 0 to 1.0 M added NaCl) has been examined. The observed physicochemical behavior is interpreted in terms of local molecular packing constraints, and in the case of the lyotropic liquid crystalline behavior global aggregate packing constraints as well.

  12. Recovery of small bioparticles by interfacial partitioning.

    Science.gov (United States)

    Jauregi, P; Hoeben, M A; van der Lans, R G J M; Kwant, G; van der Wielen, L A M

    2002-05-20

    In this article, a qualitative study of the recovery of small bioparticles by interfacial partitioning in liquid-liquid biphasic systems is presented. A range of crystallised biomolecules with varying polarities have been chosen such as glycine, phenylglycine and ampicillin. Liquid-liquid biphasic systems in a range of polarity differences were selected such as an aqueous two-phase system (ATPS), water-butanol and water-hexanol. The results indicate that interfacial partitioning of crystals occurs even when their density exceeds that of the individual liquid phases. Yet, not all crystals partition to the same extent to the interface to form a stable and thick interphase layer. This indicates some degree of selectivity. From the analysis of these results in relation to the physicochemical properties of the crystals and the liquid phases, a hypothetical mechanism for the interfacial partitioning is deduced. Overall these results support the potential of interfacial partitioning as a large scale separation technology. Copyright 2002 Wiley Periodicals, Inc.

  13. Magneto-ionic control of interfacial magnetism.

    Science.gov (United States)

    Bauer, Uwe; Yao, Lide; Tan, Aik Jun; Agrawal, Parnika; Emori, Satoru; Tuller, Harry L; van Dijken, Sebastiaan; Beach, Geoffrey S D

    2015-02-01

    In metal/oxide heterostructures, rich chemical, electronic, magnetic and mechanical properties can emerge from interfacial chemistry and structure. The possibility to dynamically control interface characteristics with an electric field paves the way towards voltage control of these properties in solid-state devices. Here, we show that electrical switching of the interfacial oxidation state allows for voltage control of magnetic properties to an extent never before achieved through conventional magneto-electric coupling mechanisms. We directly observe in situ voltage-driven O(2-) migration in a Co/metal-oxide bilayer, which we use to toggle the interfacial magnetic anisotropy energy by >0.75 erg cm(-2) at just 2 V. We exploit the thermally activated nature of ion migration to markedly increase the switching efficiency and to demonstrate reversible patterning of magnetic properties through local activation of ionic migration. These results suggest a path towards voltage-programmable materials based on solid-state switching of interface oxygen chemistry.

  14. Heat radiation vs air drying to remove interfacial water from self-etch adhesives

    OpenAIRE

    Mathews Irene; Arathi G; Balagopal S

    2008-01-01

    The clinician′s quest for time-saving and technique-insensitive technology has led to the development of simplified self-etch adhesives that are predominantly water or solvent based. Several studies have shown that conventional air-drying procedures are incapable of eliminating all the residual water in the adhesive and that it may even cause collapse of the underlying collagen matrix. We hypothesized that heat from a light source may be effective in removing water from these adhesives...

  15. Salinity of injection water and its impact on oil recovery absolute permeability, residual oil saturation, interfacial tension and capillary pressure

    OpenAIRE

    Mohammad Salehi, Mehdi; Omidvar, Pouria; Naeimi, Fatemeh

    2016-01-01

    Laboratory tests and field applications show that low-salinity water flooding could lead to significant reduction of residual oil saturation. There has been a growing interest with an increasing number of low-salinity water flooding studies. However, there are few quantitative studies on flow and transport behavior of low-salinity IOR processes. This paper presents laboratory investigation of the effect of salinity injection water on oil recovery, pressure drop, permeability, IFT and relat...

  16. Interfacial band-edge engineered TiO2 protection layer on Cu2O photocathodes for efficient water reduction reaction

    Science.gov (United States)

    Choi, Jaesuk; Song, Jun Tae; Jang, Ho Seong; Choi, Min-Jae; Sim, Dong Min; Yim, Soonmin; Lim, Hunhee; Jung, Yeon Sik; Oh, Jihun

    2017-01-01

    Photoelectrochemical (PEC) water splitting has emerged as a potential pathway to produce sustainable and renewable chemical fuels. Here, we present a highly active Cu2O/TiO2 photocathode for H2 production by enhancing the interfacial band-edge energetics of the TiO2 layer, which is realized by controlling the fixed charge density of the TiO2 protection layer. The band-edge engineered Cu2O/TiO2 (where TiO2 was grown at 80 °C via atomic layer deposition) enhances the photocurrent density up to -2.04 mA/cm2 at 0 V vs. RHE under 1 sun illumination, corresponding to about a 1,200% enhancement compared to the photocurrent density of the photocathode protected with TiO2 grown at 150 °C. Moreover, band-edge engineering of the TiO2 protection layer prevents electron accumulation at the TiO2 layer and enhances both the Faraday efficiency and the stability for hydrogen production during the PEC water reduction reaction. This facile control over the TiO2/electrolyte interface will also provide new insight for designing highly efficient and stable protection layers for various other photoelectrodes such as Si, InP, and GaAs. [Figure not available: see fulltext.

  17. Characterization of interfacial reactions and oxide films on 316L stainless steel in various simulated PWR primary water environments

    Science.gov (United States)

    Chen, Junjie; Xiao, Qian; Lu, Zhanpeng; Ru, Xiangkun; Peng, Hao; Xiong, Qi; Li, Hongjuan

    2017-06-01

    The effect of water chemistry on the electrochemical and oxidizing behaviors of 316L SS was investigated in hydrogenated, deaerated and oxygenated PWR primary water at 310 °C. Water chemistry significantly influenced the electrochemical impedance spectroscopy parameters. The highest charge-transfer resistance and oxide-film resistance occurred in oxygenated water. The highest electric double-layer capacitance and constant phase element of the oxide film were in hydrogenated water. The oxide films formed in deaerated and hydrogenated environments were similar in composition but different in morphology. An oxide film with spinel outer particles and a compact and Cr-rich inner layer was formed in both hydrogenated and deaerated water. Larger and more loosely distributed outer oxide particles were formed in deaerated water. In oxygenated water, an oxide film with hematite outer particles and a porous and Ni-rich inner layer was formed. The reaction kinetics parameters obtained by electrochemical impedance spectroscopy measurements and oxidation film properties relating to the steady or quasi-steady state conditions in the time-period of measurements could provide fundamental information for understanding stress corrosion cracking processes and controlling parameters.

  18. Structure and dynamics of interfacial water. Role of hydratation water in the globular proteins dynamics; Structure et dynamique de l`eau interfaciale. Role de l`eau d`hydratation dans la dynamique des proteines globulaires

    Energy Technology Data Exchange (ETDEWEB)

    Zanotti, J.M.

    1997-01-27

    This memoir includes five chapters. In the first chapter, are given the elements of the neutrons scattering theory that is used in this study. the second chapter is devoted to a general presentation of the interaction between biological macro molecule and water. The third part is dedicated to the study of the structure and the dynamics of interfacial water in the neighbouring of model systems, the vycor and the amorphous carbon. The results presented in this part are compared with these one relative to water dynamics at the C-phycocyanin surface. This study makes the object of the fourth chapter. Then, in the fifth and last chapter are discussed the results relative to the role of hydratation on the parv-albumin dynamics for which have been combined the neutron quasi elastic incoherent scattering and the nuclear magnetic resonance of the carbon 13 solid in natural abundance.

  19. Salinity of injection water and its impact on oil recovery absolute permeability, residual oil saturation, interfacial tension and capillary pressure

    Directory of Open Access Journals (Sweden)

    Mehdi Mohammad Salehi

    2017-06-01

    This paper presents laboratory investigation of the effect of salinity injection water on oil recovery, pressure drop, permeability, IFT and relative permeability in water flooding process. The experiments were conducted at the 80 °C and a net overburden pressure of 1700 psi using core sample. The results of this study have been shown oil recovery increases as the injected water salinity up to 200,000 ppm and appointment optimum salinity. This increase has been found to be supported by a decrease in the IFT. This effect caused a reduction in capillary pressure increasing the tendency to reduce the residual oil saturation.

  20. Friction Regimes of Water-Lubricated Diamond (111): Role of Interfacial Ether Groups and Tribo-Induced Aromatic Surface Reconstructions.

    Science.gov (United States)

    Kuwahara, Takuya; Moras, Gianpietro; Moseler, Michael

    2017-09-01

    Large-scale quantum molecular dynamics of water-lubricated diamond (111) surfaces in sliding contact reveals multiple friction regimes. While water starvation causes amorphization of the tribological interface, small H_{2}O traces are sufficient to preserve crystallinity. This can result in high friction due to cold welding via ether groups or in ultralow friction due to aromatic surface passivation triggered by tribo-induced Pandey reconstruction. At higher water coverage, Grotthuss-type diffusion and H_{2}O dissociation yield dense H/OH surface passivation leading to another ultralow friction regime.

  1. Friction Regimes of Water-Lubricated Diamond (111): Role of Interfacial Ether Groups and Tribo-Induced Aromatic Surface Reconstructions

    Science.gov (United States)

    Kuwahara, Takuya; Moras, Gianpietro; Moseler, Michael

    2017-09-01

    Large-scale quantum molecular dynamics of water-lubricated diamond (111) surfaces in sliding contact reveals multiple friction regimes. While water starvation causes amorphization of the tribological interface, small H2O traces are sufficient to preserve crystallinity. This can result in high friction due to cold welding via ether groups or in ultralow friction due to aromatic surface passivation triggered by tribo-induced Pandey reconstruction. At higher water coverage, Grotthuss-type diffusion and H2O dissociation yield dense H /OH surface passivation leading to another ultralow friction regime.

  2. X-ray Raman scattering provides evidence for interfacial acetonitrile-water dipole interactions in aqueous solutions

    Science.gov (United States)

    Huang, Ningdong; Nordlund, Dennis; Huang, Congcong; Bergmann, Uwe; Weiss, Thomas M.; Pettersson, Lars G. M.; Nilsson, Anders

    2011-01-01

    Aqueous solutions of acetonitrile (MeCN) have been studied with oxygen K-edge x-ray Raman scattering (XRS) which is found to be sensitive to the interaction between water and MeCN. The changes in the XRS spectra can be attributed to water directly interacting with MeCN and are reproduced by density functional theory calculations on small clusters of water and MeCN. The dominant structural arrangement features dipole interaction instead of H-bonds between the two species as revealed by the XRS spectra combined with spectrum calculations. Small-angle x-ray scattering shows the largest heterogeneity for a MeCN to water ratio of 0.4 in agreement with earlier small-angle neutron scattering data. PMID:22047254

  3. Interfacial area transport in bubbly flow

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, M.; Wu, Q.; Revankar, S.T. [Purdue Univ., West Lafayette, IN (United States)] [and others

    1997-12-31

    In order to close the two-fluid model for two-phase flow analyses, the interfacial area concentration needs to be modeled as a constitutive relation. In this study, the focus was on the investigation of the interfacial area concentration transport phenomena, both theoretically and experimentally. The interfacial area concentration transport equation for air-water bubbly up-flow in a vertical pipe was developed, and the models for the source and sink terms were provided. The necessary parameters for the experimental studies were identified, including the local time-averaged void fraction, interfacial area concentration, bubble interfacial velocity, liquid velocity and turbulent intensity. Experiments were performed with air-water mixture at atmospheric pressure. Double-sensor conductivity probe and hot-film probe were employed to measure the identified parameters. With these experimental data, the preliminary model evaluation was carried out for the simplest form of the developed interfacial area transport equation, i.e., the one-dimensional transport equation.

  4. Humidity-dependent compression-induced glass transition of the air–water interfacial Langmuir films of poly(D,L-lactic acid-ran-glycolic acid) (PLGA)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Chang; Lee, Hoyoung; Jung, Hyunjung; Choi, Yun Hwa; Meron, Mati; Lin, Binhua; Bang, Joona; Won, You-Yeon (KUS); (UC); (Purdue)

    2015-08-26

    Constant rate compression isotherms of the air–water interfacial Langmuir films of poly(D,L-lactic acid-ran-glycolic acid) (PLGA)show a distinct feature of an exponential increase in surface pressure in the high surface polymer concentration regime. We have previously demonstrated that this abrupt increase in surface pressure is linked to the glass transition of the polymer film, but the detailed mechanism of this process is not understood. In order to obtain a molecular-level understanding of this behavior, we performed extensive characterizations of the surface mechanical, structural and rheological properties of Langmuir PLGA films at the air–water interface, using combined experimental techniques including the Langmuir film balance, X-ray reflectivity and double-wall-ring interfacial rheometry methods.

  5. Engineering interfacial properties by anionic surfactant-chitosan complexes to improve stability of oil-in-water emulsions

    NARCIS (Netherlands)

    Zinoviadou, K.; Scholten, E.; Moschakis, T.; Biliaderis, C.G.

    2012-01-01

    Oil-in-water emulsions (10% w/w n-tetradecane) were prepared at pH = 5.7 by using, as surface active agents, electrostatically formed complexes of sodium stearoyl lactylate (SSL) at a concentration of 0.4% (w/w) and chitosan (CH) in a concentration range between 0 and 0.48% w/w. The use of complexes

  6. Interfacial integrity of bonded restorations with self-etching adhesives: Water storage and thermo-mechanical cycling.

    Science.gov (United States)

    Martins, Gislaine Cristine; Sánchez-Ayala, Alfonso; D'Alpino, Paulo Henrique Perlatti; Calixto, Abraham Lincoln; Gomes, João Carlos; Gomes, Osnara Maria Mongruel

    2012-04-01

    To evaluate the effect of thermo-mechanical cycling (TMC) on the microleakage (μL) and axial gap width (AG) of Class V bonded restorations in premolars using self-etching adhesive systems. The bond strength of composite restorations to dentin (μTBS) using the same adhesives was also evaluated in third molars after water storage: 24 h and 6 months. The research hypotheses were tested for the results of two self-etching adhesives in comparison when a conventional two-step adhesive was used: (1) the μL and AG would be lower, regardless of TMC; (2) the μTBS of self-etching adhesives would be higher, irrespective of evaluation times. Sixty Class V composite restorations were made in 30 premolars and bonded with Adper Single Bond 2 (ASB2), AdheSE (ASE), and Adper Prompt L-Pop (APL-P) (n=20). Dentin μL and AG were immediately measured for half of the sample. The other half was evaluated after TMC. Eighteen third molars were also selected and bonded using the same adhesives to test the μTBS to dentin. Specimens were evaluated after 24 h and 6 months of water storage. No differences in μL and AG were found among the groups (P>.05). The μTBS mean values were: ASB2>ASE>APL-P (Pconventional, two-step adhesive remains high after 6 months of water storage.

  7. Study of the air-water interfacial properties of biodegradable polyesters and their block copolymers with poly(ethylene glycol).

    Science.gov (United States)

    Park, Hae-Woong; Choi, Je; Ohn, Kimberly; Lee, Hyunsuk; Kim, Jin Woong; Won, You-Yeon

    2012-08-07

    It has been reported that the surface pressure-area isotherm of poly(D,L-lactic acid-ran-glycolic acid) (PLGA) at the air-water interface exhibits several interesting features: (1) a plateau at intermediate compression levels, (2) a sharp rise in surface pressure upon further compression, and (3) marked surface pressure-area hysteresis during compression-expansion cycles. To investigate the molecular origin of this behavior, we conducted an extensive set of surface pressure and AFM imaging measurements with PLGA materials having several different molecular weights and also a poly(D,L-lactic acid-ran-glycolic acid-ran-caprolactone) (PLGACL) material in which the caprolactone monomers were incorporated as a plasticizing component. The results suggest that (i) the plateau in the surface pressure-area isotherm of PLGA (or PLGACL) occurs because of the formation (and collapse) of a continuous monolayer of the polymer under continuous compression; (ii) the PLGA monolayer becomes significantly resistant to compression at high compression because under that condition the collapsed domains become large enough to become glassy (such behavior was not observed in the nonglassy PLGACL sample); and (iii) the isotherm hysteresis is due to a coarsening of the collapsed domains that occurs under high-compression conditions. We also investigated the monolayer properties of PEG-PLGA and PEG-PLGACL diblock copolymers. The results demonstrate that the tendency of PLGA (or PLGACL) to spread on water allows the polymer to be used as an anchoring block to form a smooth biodegradable monolayer of block copolymers at the air-water interface. These diblock copolymer monolayers exhibit protein resistance.

  8. Adsorption of ionic surfactants at microscopic air-water interfaces using the micropipette interfacial area-expansion method

    DEFF Research Database (Denmark)

    Kinoshita, Koji; Parra, Elisa; Needham, David

    2017-01-01

    The dynamic adsorption of ionic surfactants at air-water interfaces have been less-well studied than that of the simpler non-ionics since experimental limitations on dynamic surface tension (DST) measurements create inconsistencies in their kinetic analysis. Using our newly designed "Micropipette...... for the "ideal ionic activity", A±i, can renormalize both equilibrium and dynamic surface tension measurements and provide better estimates of the diffusion coefficient of ionic surfactants in aqueous media obtained from electroneutral models, namely extended Frumkin isotherm and Ward-Tordai adsorption models...

  9. Hydrated interfacial ions and electrons.

    Science.gov (United States)

    Abel, Bernd

    2013-01-01

    Charged particles such as hydrated ions and transient hydrated electrons, the simplest anionic reducing agents in water, and the special hydronium and hydroxide ions at water interfaces play an important role in many fields of science, such as atmospheric chemistry, radiation chemistry, and biology, as well as biochemistry. This article focuses on these species near hydrophobic interfaces of water, such as the air or vacuum interface of water or water protein/membrane interfaces. Ions at interfaces as well as solvated electrons have been reviewed frequently during the past decade. Although all species have been known for some time with seemingly familiar features, recently the picture in all cases became increasingly diffuse rather than clearer. The current account gives a critical state-of-the art overview of what is known and what remains to be understood and investigated about hydrated interfacial ions and electrons.

  10. Concentration fields near air-water interfaces during interfacial mass transport: oxygen transport and random square wave analysis

    Directory of Open Access Journals (Sweden)

    H. E. Schulz

    2009-09-01

    Full Text Available Mass transfer across a gas-liquid interface was studied theoretically and experimentally, using transfer of oxygen into water as the gas-liquid system. The experimental results support the conclusions of a theoretical description of the concentration field that uses random square waves approximations. The effect of diffusion over the concentration records was quantified. It is shown that the peak of the normalized rms concentration fluctuation profiles must be lower than 0.5, and that the position of the peak of the rms value is an adequate measure of the thickness of the diffusive layer. The position of the peak is the boundary between the regions more subject to molecular diffusion or to turbulent transport of dissolved mass.

  11. Protein interfacial structure and nanotoxicology

    Science.gov (United States)

    White, John W.; Perriman, Adam W.; McGillivray, Duncan J.; Lin, Jhih-Min

    2009-02-01

    Here we briefly recapitulate the use of X-ray and neutron reflectometry at the air-water interface to find protein structures and thermodynamics at interfaces and test a possibility for understanding those interactions between nanoparticles and proteins which lead to nanoparticle toxicology through entry into living cells. Stable monomolecular protein films have been made at the air-water interface and, with a specially designed vessel, the substrate changed from that which the air-water interfacial film was deposited. This procedure allows interactions, both chemical and physical, between introduced species and the monomolecular film to be studied by reflectometry. The method is briefly illustrated here with some new results on protein-protein interaction between β-casein and κ-casein at the air-water interface using X-rays. These two proteins are an essential component of the structure of milk. In the experiments reported, specific and directional interactions appear to cause different interfacial structures if first, a β-casein monolayer is attacked by a κ-casein solution compared to the reverse. The additional contrast associated with neutrons will be an advantage here. We then show the first results of experiments on the interaction of a β-casein monolayer with a nanoparticle titanium oxide sol, foreshadowing the study of the nanoparticle "corona" thought to be important for nanoparticle-cell wall penetration.

  12. Enhanced Bulk and Interfacial Charge Transfer Dynamics for Efficient Photoelectrochemical Water Splitting: The Case of Hematite Nanorod Arrays.

    Science.gov (United States)

    Wang, Jian; Feng, Bo; Su, Jinzhan; Guo, Liejin

    2016-09-07

    Charge transport in the bulk and across the semiconductor/electrolyte interface is one of the major issues that limits photoelectrochemical (PEC) performance in hematite photoelectrodes. Efficient charge transport in the entire hematite is of great importance to obtaining high photoelectrochemical properties. Herein, to reach this goal, we employed both TiO2 underlayer and overlayer deposition on hematite nanorod films, followed by a fast annealing treatment. The TiO2 underlayer and overlayer not only serve as dopant sources for carrier density increase but also reduce charge recombination at the fluorine-doped tin oxide (FTO)/hematite interface and accelerate charge transfer across the hematite/electrolyte interface. This synergistic doping and interface modifying effects give rise to an enhanced photoelectrochemical water oxidation performance of hematite nanorod arrays, generating an impressive photocurrent density of 1.49 mA cm(-2) at 1.23 V vs RHE. This is the first report on using both underlayer and overlayer modification with the same material to improve charge transport through the entire electron transport path in hematite, which provides a novel way to manipulate charge transfer across the semiconductor interface for a high-performance photoelectrode.

  13. Tuning interfacial complexation in aqueous two phase systems with polyelectrolytes and nanoparticles for compound all water emulsion bodies (AWE-somes).

    Science.gov (United States)

    Hann, Sarah D; Lee, Daeyeon; Stebe, Kathleen J

    2017-09-13

    Interfacial complexation between two oppositely charged polymers in aqueous two phase systems (ATPSs) leads to the formation of mechanically robust microcapsules that can be stressed without losing their structural integrity. When a polyelectrolyte (PE) is replaced with a charged nanoparticle (NP), microcapsules with internal compartments can be generated within an encapsulated shell comprising NPs and PEs, named AWE-somes. These shells, made by interfacial complexation between PEs and NPs, are, however, very brittle and can lose their integrity under mechanical stress, potentially limiting their applications. Improved control over the properties and structure of microcapsules over a wide range is needed to enable their broad utilization. In this work, we show that interfacial complexation of a polycation with a mixture of a polyanion and a negatively charged NP in ATPS presents a simple yet versatile method of tuning the structure and properties of microcapsules. We show that internal structure, along with the mechanical robustness and stimuli-responsive properties of microcapsules, can be varied by changing the concentrations of polyanion and NP present in one of the two aqueous phases. Interfacial complexation of PE with mixtures of PE and NP provides a new strategy for controlling and imparting the properties and functionality of AWE-some interfacial membranes for applications in encapsulation and release of active agents and recapitulation of basic functions of living cells.

  14. Interfacial properties of heat-treated ovalbumin.

    Science.gov (United States)

    Croguennec, Thomas; Renault, Anne; Beaufils, Sylvie; Dubois, Jean-Jacques; Pezennec, Stéphane

    2007-11-15

    The interfacial properties (kinetics of adsorption at the air/water interface, rheology of the interfacial layer) of ovalbumin molecules, unheated or previously heat-denatured in solution (10 g L(-1), pH 7, NaCl 50 mM) under controlled conditions (up to 40 min at 80 degrees C), were investigated. Heat treatments induced the formation of covalent aggregates which surface exhibits a higher hydrophobicity and an increased exposition of sulfhydryl groups when compared to native ovalbumin (unheated). Although they have a larger hydrodynamic size, aggregates adsorb as fast as native ovalbumin at the air/water interface. However, aggregates are able to established rapid contacts in the interfacial layer as shown by the fast increase of both surface pressure and shear elastic constant. In contrast, native ovalbumin needs longer time to developed intermolecular contacts and exhibits lower foam stability even if the shear elastic constant on aging reached higher value than for ovalbumin aggregates.

  15. Exploiting Policy Obscurity for Legalising Water Grabbing in the Era of Economic Reform: The Case of Maharashtra, India

    Directory of Open Access Journals (Sweden)

    Subodh Wagle

    2012-06-01

    Full Text Available Since the last two decades, economic reform in India is exerting pressure on limited land and water resources. This article argues that sectoral reforms underway in different areas such as water, electricity, and the export sector are giving rise to a new form of water grabbing in the state of Maharashtra, India. This water grabbing is legitimised by the use, application and redefinition of reform instruments such as the sectoral policy statements and laws. Maharashtra, like many other Indian states, has been a theatre for the play of power among different interest groups over control and access to water resources developed through state funding. Dams were built at the cost of depriving the upland riparian communities of their land, water and other resources. The water provided by the dams – which strengthened the political power of the leaders representing the irrigated plains – is now at the core of a shift in regional power equations. Based on case studies of three dams the paper presents these contemporary developments around water allocation and re-appropriation. These developments pertain to the shift from the erstwhile focus on securing water for irrigation to the new focus of securing water to facilitate international and domestic private investments. The paper concludes by arguing that the state is able to legitimise this form of water grabbing due the emergence of a new and grand political coalition and nexus that has emerged at the behest of the ongoing economic reforms.

  16. The interaction of two major old water bodies and its implication for the exploitation of groundwater in the multiple aquifer system of the central and northern Negev, Israel

    Science.gov (United States)

    Kronfeld, J.; Rosenthal, E.; Weinberger, G.; Flexer, A.; Berkowitz, B.

    1993-03-01

    In the Beer Sheva region of the Negev desert, the only significant fresh groundwater is contained within the Judea Group carbonate aquifer. It is found that this aquifer holds two distinctly different old water bodies. One such groundwater body has evolved in equilibrium with the carbonate aquifer rocks after being recharged during the Holocene in the Hebron Mountains north of the study area. At present, modern recharge, as denoted by the tritium and radiocarbon contents, is very minor. A subtle 'piston effect' generated by contemporary replenishment is discussed in representative hydrographs in Beer Sheva wells. Another groundwater body identified in the Judea Group aquifer derives from the underlying Kurnub Group aquifer. The regional artesian Kurnub Group aquifer (Nubian Sandstone) contains an older and brackish groundwater body which has been recharged in Sinai during Pleistocene pluvials. Faulting in the Beer Sheva region facilitated hydrologic contact between the two aquifers. Exploitation of the Judea Group has released confining pressures and resulted in the intrusion of Kurnub Group water into the overlying Judea Group carbonate aquifer. This process is most significant in those wells drilled close to major faults where salinity increases with pumping. The intruding water originating from the Kurnub Group sandstone aquifer has not yet equilibrated chemically with the carbonate host. The low pH and high temperatures that have been encountered indicate continuing and very recent intrusion. In the Beer Sheva area, in the absence of direct significant modern recharge (as determined from tritium and 14C values), all waters should be considered as paleowaters that are being mined. A complete revision of the hydrologic concept by which the multiple aquifer system can be exploited is required, to take into account the fact that the fresh Judea Group groundwater is actually an old (Holocene) water body intruded by brackish and older (Pleistocene) water along fault

  17. The importance of using simple and indigenous technologies for the exploitation of water resources in rural areas of developing countries

    Science.gov (United States)

    Faillace, C.

    Taking care of thousands of village water supply systems requires a large organization and large financial inputs which most developing countries cannot afford. The author, after having briefly outlined the main points to be considered for the implementation of successful rural water programs, stresses the need to introduce simple, low-cost technologies for supplying safe water to small rural villages. The risk of failure is greatly reduced if there is an active participation of villagers in the various phases of the project. Health education village sanitation and training in the use and repair of equipment are essential for the long life of the water systems.

  18. Ion distributions at the water/1,2-dichloroethane interface: potential of mean force approach to analyzing X-ray reflectivity and interfacial tension measurements.

    Science.gov (United States)

    Hou, Binyang; Laanait, Nouamane; Yu, Hao; Bu, Wei; Yoon, Jaesung; Lin, Binhua; Meron, Mati; Luo, Guangming; Vanysek, Petr; Schlossman, Mark L

    2013-05-02

    We present X-ray reflectivity and interfacial tension measurements of the electrified liquid/liquid interface between two immiscible electrolyte solutions for the purpose of understanding the dependence of interfacial ion distributions on the applied electric potential difference across the interface. The aqueous phase contains alkali-metal chlorides, including LiCl, NaCl, RbCl, or CsCl, and the organic phase is a 1,2-dichloroethane solution of bis(triphenylphosphor anylidene) ammonium tetrakis(pentafluorophenyl)borate (BTPPATPFB). Selected data for a subset of electric potential differences are analyzed to determine the potentials of mean force for Li(+), Rb(+), Cs(+), BTPPA(+), and TPFB(-). These potentials of mean force are then used to analyze both X-ray reflectivity and interfacial tension data measured over a wide range of electric potential differences. Comparison of X-ray reflectivity data for strongly hydrated alkali-metal ions (Li(+) and Na(+)), for which ion pairing to TPFB(-) ions across the interface is not expected, to data for weakly hydrated alkali-metal ions (Rb(+) and Cs(+)) indicates that the Gibbs energy of adsorption due to ion pairing at the interface must be small (X-ray reflectivity measurements that probe the nanoscale ion distribution and the consequences of these underlying distributions for thermodynamic studies, such as interfacial tension measurements, that yield quantities related to the integrated ion distribution.

  19. Biosurfactant as an Enhancer of Geologic Carbon Storage: Microbial Modification of Interfacial Tension and Contact Angle in Carbon dioxide/Water/Quartz Systems

    Directory of Open Access Journals (Sweden)

    Taehyung Park

    2017-07-01

    Full Text Available Injecting and storing of carbon dioxide (CO2 in deep geologic formations is considered as one of the promising approaches for geologic carbon storage. Microbial wettability alteration of injected CO2 is expected to occur naturally by microorganisms indigenous to the geologic formation or microorganisms intentionally introduced to increase CO2 storage capacity in the target reservoirs. The question as to the extent of microbial CO2 wettability alteration under reservoir conditions still warrants further investigation. This study investigated the effect of a lipopeptide biosurfactant—surfactin, on interfacial tension (IFT reduction and contact angle alteration in CO2/water/quartz systems under a laboratory setup simulating in situ reservoir conditions. The temporal shifts in the IFT and the contact angle among CO2, brine, and quartz were monitored for different CO2 phases (3 MPa, 30°C for gaseous CO2; 10 MPa, 28°C for liquid CO2; 10 MPa, 37°C for supercritical CO2 upon cultivation of Bacillus subtilis strain ATCC6633 with induced surfactin secretion activity. Due to the secreted surfactin, the IFT between CO2 and brine decreased: from 49.5 to 30 mN/m, by ∼39% for gaseous CO2; from 28.5 to 13 mN/m, by 54% for liquid CO2; and from 32.5 to 18.5 mN/m, by ∼43% for supercritical CO2, respectively. The contact angle of a CO2 droplet on a quartz disk in brine increased: from 20.5° to 23.2°, by 1.16 times for gaseous CO2; from 18.4° to 61.8°, by 3.36 times for liquid CO2; and from 35.5° to 47.7°, by 1.34 times for supercritical CO2, respectively. With the microbially altered CO2 wettability, improvement in sweep efficiency of injected and displaced CO2 was evaluated using 2-D pore network model simulations; again the increment in sweep efficiency was the greatest in liquid CO2 phase due to the largest reduction in capillary factor. This result provides novel insights as to the role of naturally occurring biosurfactants in CO2 storage and

  20. The Lower Sevier River Basin Crop Monitor and Forecast Decision Support System: Exploiting Landsat Imagery to Provide Continuous Information to Farmers and Water Managers

    Science.gov (United States)

    Torres-Rua, A. F.; Walker, W. R.; McKee, M.

    2013-12-01

    The last century has seen a large number of innovations in agriculture such as better policies for water control and management, upgraded water conveyance, irrigation, distribution, and monitoring systems, and better weather forecasting products. In spite of this, irrigation management and irrigation water deliveries by farmers/water managers is still based on factors like water share amounts, tradition, and past experience on irrigation. These factors are not necessarily related to the actual crop water use; they are followed because of the absence of related information provided in a timely manner at an affordable cost. Thus, it is necessary to develop means to deliver continuous and personalized information about crop water requirements to water users/managers at the field and irrigation system levels so managers at these levels can better quantify the required versus available water for irrigation during the irrigation season. This study presents a new decision support system (DSS) platform that addresses the absence of information on actual crop water requirements and crop performance by providing continuous updated farm-based crop water use along with other farm performance indicators such as crop yield and farm management to irrigators and water managers. This DSS exploits the periodicity of the Landsat Satellite Mission (8 to 16 days, depending on the period of interest) to provide remote monitoring at the individual field and irrigation system levels. The Landsat satellite images are converted into information about crop water use, yield performance and field management through application of state-of-the-art semi-physical and statistical algorithms that provide this information at a pixel basis that are ultimately aggregated to field and irrigation system levels. A version of the DSS has been implemented for the agricultural lands in the Lower Sevier River, Utah, and has been operational since the beginning of the 2013 irrigation season. The main goal of

  1. Interfacial functionalization and engineering of nanoparticles

    Science.gov (United States)

    Song, Yang

    also of the metal elements in the nanoparticle cores, in contrast to the bulk-exchange counterparts where these distributions were homogeneous within the nanoparticles, as manifested in contact angle, UV--vis, XPS, and TEM measurements. More interestingly, the electrocatalytic performance of the Janus nanoparticles was markedly better than the bulk-exchange ones, suggesting that the segregated distribution of the polar ligands from the apolar ones might further facilitate charge transfer from Ag to Au in the nanoparticle cores, leading to additional improvement of the adsorption and reduction of oxygen. This interfacial protocol was then adopted to prepare trimetallic Ag AuPt Neapolitan nanoparticles by two sequential galvanic exchange reactions of 1-hexanethiolate-capped silver nanoparticles with gold(I)-thiomalic acid and platinum(II)-hexanethiolate complexes. As both reactions were confined to an interface, the Au and Pt elements were situated on two opposite poles of the original Ag nanoparticles, which was clearly manifested in elemental mapping of the nanoparticles, and consistent with the damping and red-shift of the nanoparticle surface plasmon resonance. As nanoscale analogs to conventional amphiphilic molecules, the resulting Janus nanoparticles were found to form oil-in-water micelle-like or water-in-oil reverse micelle-like superparticulate structures depending on the solvent media. These unique characteristics were exploited for the effective transfer of diverse guest nanoparticles between organic and water phase. The transfer of hydrophobic nanoparticles from organic to water media or water-soluble nanoparticles to the organic phase was evidenced by TEM, DLS, UV-Vis, and PL measurements. In particular, line scans based on EDS analysis showed that the vesicle-like structures consisted of multiple layers of the Janus nanoparticles, which encapsulated the guest nanoparticles in the cores. The results highlight the unique effectiveness of using Janus

  2. The Representation of Tropospheric Water Vapor Over Low-Latitude Oceans in (Re-)analysis: Errors, Impacts, and the Ability to Exploit Current and Prospective Observations

    Science.gov (United States)

    Pincus, Robert; Beljaars, Anton; Buehler, Stefan A.; Kirchengast, Gottfried; Ladstaedter, Florian; Whitaker, Jeffrey S.

    2017-10-01

    This paper addresses the representation of lower tropospheric water vapor in the meteorological analyses—fully detailed estimates of atmospheric state—providing the wide temporal and spatial coverage used in many process studies. Analyses are produced in a cycle combining short forecasts from initial conditions with data assimilation that optimally estimates the state of the atmosphere from the previous forecasts and new observations, providing initial conditions for the next set of forecasts. Estimates of water vapor are among the less certain aspects of the state because the quantity poses special challenges for data assimilation while being particularly sensitive to the details of model parameterizations. Over remote tropical oceans observations of water vapor come from two sources: passive observations at microwave or infrared wavelengths that provide relatively strong constraints over large areas on column-integrated moisture but relatively coarse vertical resolution, and occultations of Global Positioning System provide much higher accuracy and vertical resolution but are relatively spatially coarse. Over low-latitude oceans, experiences with two systems suggest that current analyses reproduce much of the large-scale variability in integrated water vapor but have systematic errors in the representation of the boundary layer with compensating errors in the free troposphere; these errors introduce errors of order 10% in radiative heating rates through the free troposphere. New observations, such as might be obtained by future observing systems, improve the estimates of water vapor but this improvement is lost relatively quickly, suggesting that exploiting better observations will require targeted improvements to global forecast models.

  3. Proton Transfer Dynamics at the Membrane/Water Interface: Dependence on the Fixed and Mobile pH Buffers, on the Size and Form of Membrane Particles, and on the Interfacial Potential Barrier

    Science.gov (United States)

    Cherepanov, Dmitry A.; Junge, Wolfgang; Mulkidjanian, Armen Y.

    2004-01-01

    Crossing the membrane/water interface is an indispensable step in the transmembrane proton transfer. Elsewhere we have shown that the low dielectric permittivity of the surface water gives rise to a potential barrier for ions, so that the surface pH can deviate from that in the bulk water at steady operation of proton pumps. Here we addressed the retardation in the pulsed proton transfer across the interface as observed when light-triggered membrane proton pumps ejected or captured protons. By solving the system of diffusion equations we analyzed how the proton relaxation depends on the concentration of mobile pH buffers, on the surface buffer capacity, on the form and size of membrane particles, and on the height of the potential barrier. The fit of experimental data on proton relaxation in chromatophore vesicles from phototropic bacteria and in bacteriorhodopsin-containing membranes yielded estimates for the interfacial potential barrier for H+/OH− ions of ∼120 meV. We analyzed published data on the acceleration of proton equilibration by anionic pH buffers and found that the height of the interfacial barrier correlated with their electric charge ranging from 90 to 120 meV for the singly charged species to >360 meV for the tetra-charged pyranine. PMID:14747306

  4. Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems (Volume IV. Chapters 15-19)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, T.; Park, J.; Kojasoy, G.

    2003-03-15

    Experiments were performed on horizontal air-water bubbly two-phase flow, axial flow, stratified wavy flow, and annular flow. Theoretical studies were also undertaken on interfacial parameters for a horizontal two-phase flow.

  5. Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems (Volume III. Chapters 11-14)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, T.; Park, J.; Kojasoy, G.

    2003-03-15

    Experiments were performed on horizontal air-water bubbly two-phase flow, axial flow, stratified wavy flow, and annular flow. Theoretical studies were also undertaken on interfacial parameters for a horizontal two-phase flow.

  6. Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems (Volume I. Chapters 1-5)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, T.; Park, J.; Kojasoy, G.

    2003-03-15

    Experiments were performed on horizontal air-water bubbly two-phase flow, axial flow, stratified wavy flow, and annular flow. Theoretical studies were also undertaken on interfacial parameters for a horizontal two-phase flow.

  7. Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems (Volume II. Chapters 6-10)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, T.; Park, J.; Kojasoy, G.

    2003-03-15

    Experiments were performed on horizontal air-water bubbly two-phase flow, axial flow, stratified wavy flow, and annular flow. Theoretical studies were also undertaken on interfacial parameters for a horizontal two-phase flow.

  8. Exploiting the biosynthetic machinery of Streptomyces pilosus to engineer a water-soluble zirconium(iv) chelator.

    Science.gov (United States)

    Richardson-Sanchez, Tomas; Tieu, William; Gotsbacher, Michael P; Telfer, Thomas J; Codd, Rachel

    2017-07-21

    The water solubility of a natural product-inspired octadentate hydroxamic acid chelator designed to coordinate Zr(iv)-89 has been improved by using a combined microbiological-chemical approach to engineer four ether oxygen atoms into the main-chain region of a methylene-containing analogue. First, an analogue of the trimeric hydroxamic acid desferrioxamine B (DFOB) that contained three main-chain ether oxygen atoms (DFOB-O3) was generated from cultures of the native DFOB-producer Streptomyces pilosus supplemented with oxybis(ethanamine) (OBEA), which competed against the native 1,5-diaminopentane (DP) substrate during DFOB assembly. This precursor-directed biosynthesis (PDB) approach generated a suite of DFOB analogues containing one (DFOB-O1), two (DFOB-O2) or three (DFOB-O3) ether oxygen atoms, with the latter produced as the major species. Log P measurements showed DFOB-O3 was about 45 times more water soluble than DFOB. Second, a peptide coupling chain-extension reaction between DFOB-O3 and the synthetic ether-containing endo-hydroxamic acid monomer 4-((2-(2-aminoethoxy)ethyl)(hydroxy)amino)-4-oxobutanoic acid (PBH-O1) gave the water soluble tetrameric hydroxamic acid DFOB-O3-PBH-O1 as an isostere of sparingly water soluble DFOB-PBH. The complex between DFOB-O3-PBH-O1 and natZr(iv), examined as a surrogate measure of the radiolabelling procedure, analysed by LC-MS as the protonated adduct ([M + H]+, m/zobs = 855.2; m/zcalc = 855.3), with supporting HRMS data. The use of a microbiological system to generate a water-soluble analogue of a natural product for downstream semi-synthetic chemistry is an attractive pathway for developing new drugs and imaging agents. The improved water solubility of DFOB-O3-PBH-O1 could facilitate the synthesis and purification of downstream products, as part of the ongoing development of ligands optimised for Zr(iv)-89 immunological PET imaging.

  9. Interfacial phenomena and the ocular surface.

    Science.gov (United States)

    Yañez-Soto, Bernardo; Mannis, Mark J; Schwab, Ivan R; Li, Jennifer Y; Leonard, Brian C; Abbott, Nicholas L; Murphy, Christopher J

    2014-07-01

    Ocular surface disorders, such as dry eye disease, ocular rosacea, and allergic conjunctivitis, are a heterogeneous group of diseases that require an interdisciplinary approach to establish underlying causes and develop effective therapeutic strategies. These diverse disorders share a common thread in that they involve direct changes in ocular surface chemistry as well as the rheological properties of the tear film and topographical attributes of the cellular elements of the ocular surface. Knowledge of these properties is crucial to understand the formation and stability of the preocular tear film. The study of interfacial phenomena of the ocular surface flourished during the 1970s and 1980s, but after a series of lively debates in the literature concerning distinctions between the epithelial and the glandular origin of ocular surface disorders during the 1990s, research into this important topic has declined. In the meantime, new tools and techniques for the characterization and functionalization of biological surfaces have been developed. This review summarizes the available literature regarding the physicochemical attributes of the ocular surface, analyzes the role of interfacial phenomena in the pathobiology of ocular surface disease, identifies critical knowledge gaps concerning interfacial phenomena of the ocular surface, and discusses the opportunities for the exploitation of these phenomena to develop improved therapeutics for the treatment of ocular surface disorders. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. First-principles prediction of liquid/liquid interfacial tension

    DEFF Research Database (Denmark)

    Andersson, Martin Peter; Bennetzen, M.V.; Klamt, A.

    2014-01-01

    The interfacial tension between two liquids is the free energy per unit surface area required to create that interface. Interfacial tension is a determining factor for two-phase liquid behavior in a wide variety of systems ranging from water flooding in oil recovery processes and remediation...... of groundwater aquifers contaminated by chlorinated solvents to drug delivery and a host of industrial processes. Here, we present a model for predicting interfacial tension from first principles using density functional theory calculations. Our model requires no experimental input and is applicable to liquid...

  11. Single-Molecule Interfacial Electron Transfer

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Wilson [University of California - Irvine

    2018-02-03

    Interfacial electron transfer (ET) plays an important role in many chemical and biological processes. Specifically, interfacial ET in TiO2-based systems is important to solar energy technology, catalysis, and environmental remediation technology. However, the microscopic mechanism of interfacial ET is not well understood with regard to atomic surface structure, molecular structure, bonding, orientation, and motion. In this project, we used two complementary methodologies; single-molecule fluorescence spectroscopy, and scanning-tunneling microscopy and spectroscopy (STM and STS) to address this scientific need. The goal of this project was to integrate these techniques and measure the molecular dependence of ET between adsorbed molecules and TiO2 semiconductor surfaces and the ET induced reactions such as the splitting of water. The scanning probe techniques, STM and STS, are capable of providing the highest spatial resolution but not easily time-resolved data. Single-molecule fluorescence spectroscopy is capable of good time resolution but requires further development to match the spatial resolution of the STM. The integrated approach involving Peter Lu at Bowling Green State University (BGSU) and Wilson Ho at the University of California, Irvine (UC Irvine) produced methods for time and spatially resolved chemical imaging of interfacial electron transfer dynamics and photocatalytic reactions. An integral aspect of the joint research was a significant exchange of graduate students to work at the two institutions. This project bridged complementary approaches to investigate a set of common problems by working with the same molecules on a variety of solid surfaces, but using appropriate techniques to probe under ambient (BGSU) and ultrahigh vacuum (UCI) conditions. The molecular level understanding of the fundamental interfacial electron transfer processes obtained in this joint project will be important for developing efficient light harvesting, solar energy

  12. Effect of nanoscale patterned interfacial roughness on interfacial toughness.

    Energy Technology Data Exchange (ETDEWEB)

    Zimmerman, Jonathan A.; Moody, Neville Reid; Mook, William M. (University of Minnesota, Minneapolis, MN); Kennedy, Marian S. (Clemson University, Clemson, SC); Bahr, David F. (Washington State University, Pullman, WA); Zhou, Xiao Wang; Reedy, Earl David, Jr.

    2007-09-01

    The performance and the reliability of many devices are controlled by interfaces between thin films. In this study we investigated the use of patterned, nanoscale interfacial roughness as a way to increase the apparent interfacial toughness of brittle, thin-film material systems. The experimental portion of the study measured the interfacial toughness of a number of interfaces with nanoscale roughness. This included a silicon interface with a rectangular-toothed pattern of 60-nm wide by 90-nm deep channels fabricated using nanoimprint lithography techniques. Detailed finite element simulations were used to investigate the nature of interfacial crack growth when the interface is patterned. These simulations examined how geometric and material parameter choices affect the apparent toughness. Atomistic simulations were also performed with the aim of identifying possible modifications to the interfacial separation models currently used in nanoscale, finite element fracture analyses. The fundamental nature of atomistic traction separation for mixed mode loadings was investigated.

  13. The Ethics of Exploitation

    Directory of Open Access Journals (Sweden)

    Paul McLaughlin

    2008-11-01

    Full Text Available Philosophical inquiry into exploitation has two major deficiencies to date: it assumes that exploitation is wrong by definition; and it pays too much attention to the Marxian account of exploitation. Two senses of exploitation should be distinguished: the ‘moral’ or pejorative sense and the ‘non-moral’ or ‘non-prejudicial’ sense. By demonstrating the conceptual inadequacy of exploitation as defined in the first sense, and by defining exploitation adequately in the latter sense, we seek to demonstrate the moral complexity of exploitation. We contend, moreover, that moral evaluation of exploitation is only possible once we abandon a strictly Marxian framework and attempt, in the long run, to develop an integral ethic along Godwinian lines.

  14. Interfacial assembly of dendritic microcapsules with host-guest chemistry

    Science.gov (United States)

    Zheng, Yu; Yu, Ziyi; Parker, Richard M.; Wu, Yuchao; Abell, Chris; Scherman, Oren A.

    2014-12-01

    The self-assembly of nanoscale materials to form hierarchically ordered structures promises new opportunities in drug delivery, as well as magnetic materials and devices. Herein, we report a simple means to promote the self-assembly of two polymers with functional groups at a water-chloroform interface using microfluidic technology. Two polymeric layers can be assembled and disassembled at the droplet interface using the efficiency of cucurbit[8]uril (CB[8]) host-guest supramolecular chemistry. The microcapsules produced are extremely monodisperse in size and can encapsulate target molecules in a robust, well-defined manner. In addition, we exploit a dendritic copolymer architecture to trap a small hydrophilic molecule in the microcapsule skin as cargo. This demonstrates not only the ability to encapsulate small molecules but also the ability to orthogonally store both hydrophilic and hydrophobic cargos within a single microcapsule. The interfacially assembled supramolecular microcapsules can benefit from the diversity of polymeric materials, allowing for fine control over the microcapsule properties.

  15. Arresting dissolution by interfacial rheology design

    Science.gov (United States)

    Beltramo, Peter J.; Gupta, Manish; Alicke, Alexandra; Liascukiene, Irma; Gunes, Deniz Z.; Baroud, Charles N.; Vermant, Jan

    2017-09-01

    A strategy to halt dissolution of particle-coated air bubbles in water based on interfacial rheology design is presented. Whereas previously a dense monolayer was believed to be required for such an “armored bubble” to resist dissolution, in fact engineering a 2D yield stress interface suffices to achieve such performance at submonolayer particle coverages. We use a suite of interfacial rheology techniques to characterize spherical and ellipsoidal particles at an air-water interface as a function of surface coverage. Bubbles with varying particle coverages are made and their resistance to dissolution evaluated using a microfluidic technique. Whereas a bare bubble only has a single pressure at which a given radius is stable, we find a range of pressures over which bubble dissolution is arrested for armored bubbles. The link between interfacial rheology and macroscopic dissolution of ˜ 100 μm bubbles coated with ˜ 1 μm particles is presented and discussed. The generic design rationale is confirmed by using nonspherical particles, which develop significant yield stress at even lower surface coverages. Hence, it can be applied to successfully inhibit Ostwald ripening in a multitude of foam and emulsion applications.

  16. Soft microcapsules with highly plastic shells formed by interfacial polyelectrolyte-nanoparticle complexation.

    Science.gov (United States)

    Kaufman, Gilad; Nejati, Siamak; Sarfati, Raphael; Boltyanskiy, Rostislav; Loewenberg, Michael; Dufresne, Eric R; Osuji, Chinedum O

    2015-10-14

    Composite microcapsules have been aggressively pursued as designed chemical entities for biomedical and other applications. Common preparations rely on multi-step, time consuming processes. Here, we present a single-step approach to fabricate such microcapsules with shells composed of nanoparticle-polyelectrolyte and protein-polyelectrolyte complexes, and demonstrate control of the mechanical and release properties of these constructs. Interfacial polyelectrolyte-nanoparticle and polyelectrolyte-protein complexation across a water-oil droplet interface results in the formation of capsules with shell thicknesses of a few μm. Silica shell microcapsules exhibited a significant plastic response at small deformations, whereas lysozyme incorporated shells displayed a more elastic response. We exploit the plasticity of nanoparticle incorporated shells to produce microcapsules with high aspect ratio protrusions by micropipette aspiration.

  17. Biconical bob oscillatory interfacial rheometer

    Energy Technology Data Exchange (ETDEWEB)

    Nagarajan, R.; Chung, S.I.; Wasan, D.T. [Illinois Inst. of Tech., Chicago, IL (United States). Dept. of Chemical Engineering

    1998-08-01

    This paper describes a biconical bob oscillatory interfacial rheometer designed to measure the dynamic viscoelastic response of a liquid-liquid interface subjected to a small amplitude oscillatory shear stress. This instrument is used to examine the rheological behavior of interfaces in the presence of surfactants, especially macromolecular types. Rheological parameters are calculated from a hydrodynamic analysis incorporating a linear viscoelastic interfacial rheological model. The general response of this instrument is compared with the oscillatory deep channel interfacial rheometer which is also capable of similar measurements. Measurements of interfacial viscoelasticity for the same liquid-liquid system with the two rheometers, the biconical bob and the deep channel rheometers, are shown to be comparable. This study demonstrates the intrinsic nature and, therefore, the instrument independent of these dynamic interfacial rheological properties. Accurate measurements of interfacial shear viscoelasticity can be carried out over a wide range of systems by combining measurements with the oscillatory interfacial rheometers. The limitations and regime of usefulness of these instruments are discussed.

  18. Biconical Bob Oscillatory Interfacial Rheometer.

    Science.gov (United States)

    Nagarajan; Chung; Wasan

    1998-08-01

    This paper describes a biconical bob oscillatory interfacial rheometer designed to measure the dynamic viscoelastic response of a liquid-liquid interface subjected to a small amplitude oscillatory shear stress. This instrument is used to examine the rheological behavior of interfaces in the presence of surfactants, especially macromolecular types. Rheological parameters are calculated from a hydrodynamic analysis incorporating a linear viscoelastic interfacial rheological model. The general response of this instrument is compared with the oscillatory deep channel interfacial rheometer which is also capable of similar measurements. Measurements of interfacial viscoelasticity for the same liquid-liquid system with the two rheometers, the biconical bob and the deep channel rheometers, are shown to be comparable. This study demonstrates the intrinsic nature and, therefore, the instrument independence of these dynamic interfacial rheological properties. Accurate measurements of interfacial shear viscoelasticity can be carried out over a wide range of systems by combining measurements with the oscillatory interfacial rheometers. The limitations and regime of usefulness of these instruments are discussed. Copyright 1998 Academic Press.

  19. Exploitability Assessment with TEASER

    Science.gov (United States)

    2017-05-01

    exploits. We saw this as an advantage of our dataset because we had to confirm that either a bug was exploitable or not exploitable. For the 28 CHAPTER 5...corruption which demonstrates that there is very little activity within c-ares to take advantage of after the heap corruption. This idea is in line with the...remote code execution POCs. 42 Bibliography [1] Analyze crashes to find security vulnerabilities in your apps . https: //blogs.msdn.microsoft.com

  20. Anthropology of sexual exploitation

    Directory of Open Access Journals (Sweden)

    Lalić Velibor

    2009-01-01

    Full Text Available In this paper, the authors observe sexual exploitation from an anthropological perspective. They analyze the rational, ethical, emotional and mythological dimensions of human sexuality. Consequently, after setting the phenomenon in a social and historical context, sexual exploitation is closely observed in the contemporary age. Based on thoughts of relevant thinkers, they make the conclusion that the elimination of sexual exploitation is not an utterly legal issue, but political and economical issues as well. Namely, legal norms are not sufficient to overcome sexual exploitation, but, political and economical relationships in contemporary societies, which will be based on sincere equal opportunities must be established.

  1. EXPLOITATION OF GRANITE BOULDER

    Directory of Open Access Journals (Sweden)

    Ivan Cotman

    1994-12-01

    Full Text Available The processes of forming, petrography, features, properties and exploitation of granite boulders are described. The directional drilling and black powder blasting is the succesful method in exploitation of granite boulders (boulder technology (the paper is published in Croatian.

  2. Global Climate Responses to Anthropogenic Groundwater Exploitation

    Science.gov (United States)

    Zeng, Y.; Xie, Z.

    2015-12-01

    In this study, a groundwater exploitation scheme is incorporated into the earth system model, Community Earth System Model 1.2.0 (CESM1.2.0), which is called CESM1.2_GW, and the climatic responses to anthropogenic groundwater withdrawal are then investigated on global scale. The scheme models anthropogenic groundwater exploitation and consumption, which are then divided into agricultural irrigation, industrial use and domestic use. A group of 41-year ensemble groundwater exploitation simulations with six different initial conditions, and a group of ensemble control simulations without exploitation are conducted using the developed model CESM1.2_GW with water supplies and demands estimated. The results reveal that the groundwater exploitation and water consumption cause drying effects on soil moisture in deep layers and wetting effects in upper layers, along with a rapidly declining groundwater table in Central US, Haihe River Basin in China and Northern India and Pakistan where groundwater extraction are most severe in the world. The atmosphere also responds to anthropogenic groundwater exploitation. Cooling effects on lower troposphere appear in large areas of North China Plain and of Northern India and Pakistan. Increased precipitation occurs in Haihe River Basin due to increased evapotranspiration from irrigation. Decreased precipitation occurs in Northern India because water vapor here is taken away by monsoon anomalies induced by anthropogenic alteration of groundwater. The local reducing effects of anthropogenic groundwater exploitation on total terrestrial water storage evinces that water resource is unsustainable with the current high exploitation rate. Therefore, a balance between slow groundwater withdrawal and rapid human economic development must be achieved to maintain a sustainable water resource, especially in over-exploitation regions such as Central US, Northern China, India and Pakistan.

  3. Separation performance and interfacial properties of nanocomposite reverse osmosis membranes

    KAUST Repository

    Pendergast, MaryTheresa M.

    2013-01-01

    Four different types of nanocomposite reverse osmosis (RO) membranes were formed by interfacial polymerization of either polyamide (PA) or zeolite A-polyamide nanocomposite (ZA-PA) thin films over either pure polysulfone (PSf) or zeolite A-polysulfone nanocomposite (ZA-PSf) support membranes cast by wet phase inversion. All three nanocomposite membranes exhibited superior separation performance and interfacial properties relative to hand-cast TFC analogs including: (1) smoother, more hydrophilic surfaces (2) higher water permeability and salt rejection, and (3) improved resistance to physical compaction. Less compaction occurred for membranes with nanoparticles embedded in interfacially polymerized coating films, which adds further proof that flux decline associated with physical compaction is influenced by coating film properties in addition to support membrane properties. The new classes of nanocomposite membrane materials continue to offer promise of further improved RO membranes for use in desalination and advanced water purification. © 2011 Elsevier B.V.

  4. Exploitation of 3D face-centered cubic mesoporous silica as a carrier for a poorly water soluble drug: Influence of pore size on release rate

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Wenquan; Wan, Long; Zhang, Chen; Gao, Yikun; Zheng, Xin; Jiang, Tongying; Wang, Siling, E-mail: silingwang@syphu.edu.cn

    2014-01-01

    The purposes of the present work were to explore the potential application of 3D face-centered cubic mesoporous silica (FMS) with pore size of 16.0 nm as a delivery system for poorly soluble drugs and investigate the effect of pore size on the dissolution rate. FMS with different pore sizes (16.0, 6.9 and 3.7 nm) was successfully synthesized by using Pluronic block co-polymer F127 as a template and adjusting the reaction temperatures. Celecoxib (CEL), which is a BCS class II drug, was used as a model drug and loaded into FMS with different pore sizes by the solvent deposition method at a drug–silica ratio of 1:4. Characterization using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transformation infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), nitrogen adsorption, X-ray diffraction (XRD), and differential scanning calorimetry (DSC) was used to systematically investigate the drug loading process. The results obtained showed that CEL was in a non-crystalline state after incorporation of CEL into the pores of FMS-15 with pore size of 16.0 nm. In vitro dissolution was carried out to demonstrate the effects of FMS with different pore sizes on the release of CEL. The results obtained indicated that the dissolution rate of CEL from FMS-15 was significantly enhanced compared with pure CEL. This could be explained by supposing that CEL encountered less diffusion resistance and its crystallinity decreased due to the large pore size of 16.0 nm and the nanopore channels of FMS-15. Moreover, drug loading and pore size both play an important role in enhancing the dissolution properties for the poorly water-soluble drugs. As the pore size between 3.7 and 16.0 nm increased, the dissolution rate of CEL from FMS gradually increased. - Highlights: • Exploitation of 3D cubic mesoporous silica (16 nm) as a carrier was completed. • The release rate of CEL increased on increasing the pore size of carriers. • The crystallinity

  5. Effect of temperature on the interfacial behavior of a polystyrene-b-poly(methyl methacrylate) diblock copolymer at the air/water interface.

    Science.gov (United States)

    Seo, Yongsok; Cho, Chung Yeon; Hwangbo, Minyoung; Choi, Hyoung Jin; Hong, Soon Man

    2008-03-18

    Monolayers of a polystyrene-poly(methyl methacrylate) (PS-PMMA) diblock copolymer at the air-water interface were studied by measuring the surface pressure-area isotherms at several temperatures. Langmuir film balance experiments and atomic force microscopy showed that the diblock copolymer molecules formed surface micelles. In the plot of the surface pressure versus surface area per repeating unit, the monolayer changed from the gas phase to the liquid expanded phase at lower surface pressure for systems at low temperature compared to those at high temperature. In addition, a plateau, corresponding to the transition from the liquid expanded to liquid condensed phase, appeared in that plot at lower surface pressure for systems with a higher subphase (water) temperature. Hysteresis was observed in the compression-expansion cycle process. Increasing the subphase temperature alleviated this hyteresis gap, especially at low surface pressures. The minimum in the plot of the surface pressure versus surface area per repeating unit in the expansion process (which arises from the transition) and the transition plateau appeared more vividly at higher water temperature. These dynamic experimental results show that PS-PMMA diblock copolymers, in which both blocks are insoluble in water, do not form complicated entanglements in two-dimensional space. Although higher water temperature provided more entropy to the chains, and thus more conformational freedom, it did not change the surface morphology of the condensed film because both blocks of PS-PMMA are insoluble in water.

  6. Fundamental insights into interfacial catalysis.

    Science.gov (United States)

    Gong, Jinlong; Bao, Xinhe

    2017-04-03

    Surface and interfacial catalysis plays a vital role in chemical industries, electrochemistry and photochemical reactions. The challenges of modern chemistry are to optimize the chemical reaction processes and understand the detailed mechanism of chemical reactions. Since the early 1960s, the foundation of surface science systems has allowed the study of surface and interfacial phenomena on atomic/molecular level, and thus brought a number of significant developments to fundamental and technological processes, such as catalysis, material science and biochemistry, just to name a few. This themed issue describes the recent advances and developments in the fundamental understanding of surface and interfacial catalysis, encompassing areas of knowledge from metal to metal oxide, carbide, graphene, hexagonal boron nitride, and transition metal dichalcogenides under ultrahigh vacuum conditions, as well as under realistic reaction conditions.

  7. Fluorescent probes used to monitor membrane interfacial polarity.

    NARCIS (Netherlands)

    Epand, R.M.; Kraayenhof, R.

    1999-01-01

    The polarity of the interface between a lipid bilayer membrane and bulk water is an important physical parameter of the membrane. It is likely that several membrane-dependent biological functions are modulated by this property. However, interfacial polarity can be difficult to define because of an

  8. Interfacial adsorption and aggregation of amphiphilic proteins

    Science.gov (United States)

    Cheung, David

    2012-02-01

    The adsorption and aggregation on liquid interfaces of proteins is important in many biological contexts, such as the formation of aerial structures, immune response, and catalysis. Likewise the adsorption of proteins onto interfaces has applications in food technology, drug delivery, and in personal care products. As such there has been much interest in the study of a wide range of biomolecules at liquid interfaces. One class of proteins that has attracted particular attention are hydrophobins, small, fungal proteins with a distinct, amphiphilic surface structure. This makes these proteins highly surface active and they recently attracted much interest. In order to understand their potential applications a microscopic description of their interfacial and self-assembly is necessary and molecular simulation provides a powerful tool for providing this. In this presentation I will describe some recent work using coarse-grained molecular dynamics simulations to study the interfacial and aggregation behaviour of hydrophobins. Specifically this will present the calculation of their adsorption strength at oil-water and air-water interfaces, investigate the stability of hydrophobin aggregates in solution and their interaction with surfactants.

  9. On Modulating Interfacial Structure towards Improved Anti-Icing Performance

    Directory of Open Access Journals (Sweden)

    Kshitij C. Jha

    2016-01-01

    Full Text Available The design of anti-icing surfaces presents an interface with high causal density that has been challenging to quantify in terms of individual contributions of various interactions and environmental factors. In this commentary, we highlight the role of interfacial water structure as uniquely expressing the physico-chemical aspects of ice accretion. Recent work on the topic that focuses on control of interfacial structure is discussed along with results by our research group on wettability of chemically modified surfaces and the role of ions in modulating interfacial structure. Suggestions for systematic studies to understand the fundamental interactions at play in ice adhesion at interfaces are made especially in the under-explored areas of cooperative hydrogen bonding and the role of solvated counterions. Insights expected from such studies would contribute to design of robust anti-icing hierarchies.

  10. Dentin-cement Interfacial Interaction

    Science.gov (United States)

    Atmeh, A.R.; Chong, E.Z.; Richard, G.; Festy, F.; Watson, T.F.

    2012-01-01

    The interfacial properties of a new calcium-silicate-based coronal restorative material (Biodentine™) and a glass-ionomer cement (GIC) with dentin have been studied by confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), micro-Raman spectroscopy, and two-photon auto-fluorescence and second-harmonic-generation (SHG) imaging. Results indicate the formation of tag-like structures alongside an interfacial layer called the “mineral infiltration zone”, where the alkaline caustic effect of the calcium silicate cement’s hydration products degrades the collagenous component of the interfacial dentin. This degradation leads to the formation of a porous structure which facilitates the permeation of high concentrations of Ca2+, OH-, and CO32- ions, leading to increased mineralization in this region. Comparison of the dentin-restorative interfaces shows that there is a dentin-mineral infiltration with the Biodentine, whereas polyacrylic and tartaric acids and their salts characterize the penetration of the GIC. A new type of interfacial interaction, “the mineral infiltration zone”, is suggested for these calcium-silicate-based cements. PMID:22436906

  11. Investigation of the efect of the coal particle sizes on the interfacial and rheological properties of coal-water slurry fuels

    Energy Technology Data Exchange (ETDEWEB)

    Kihm, K.D.; Deignan, P. [Texas A& M Univ., College Station, TX (United States)

    1995-11-01

    Experiments were conducted to investigate the effect of particle size on coal-water slurry (CWS) surface tension properties. Two different coal powder samples of different size ranges were obtained through sieving of coal from the Upper Elkhorn Seam. The surfactant (anionic DDBS-soft, dodecylbenzene sulfonic acid) concentration varied from 0 to 1.0% in weight while the coal loading remained at 40% in weight for all the cases. A du Nouy ring tensiometer and a maximum bubble pressure tensiometer measured the static and dynamic surface tensions, respectively, The results show that both static and dynamic surface tensions tend to increase with decreasing coal particle sizes suspended in CWS fuels. Examination of the peak pressure, minimum pressure, surfactant diffusion time, and dead time were also made to correlate these microscopic pressure behavior with the macroscopic dynamic surface tension and to examine the accuracy of the experiment.

  12. Interfacial jetting phenomena induced by focused surface vibrations.

    Science.gov (United States)

    Tan, Ming K; Friend, James R; Yeo, Leslie Y

    2009-07-10

    We exploit large accelerations associated with surface acoustic waves to drive an extraordinary fluid jetting phenomena. Laterally focusing the acoustic energy to a small region beneath a drop placed on the surface causes rapid interfacial destabilization. Above a critical Weber number We, an elongated jet forms for drops with dimensions greater than the fluid sound wavelength. Further increases in We lead to single droplet pinch-off and subsequent axisymmetric breakup to form multiple droplets. A simple equation based on a momentum balance is derived to predict the jet velocity.

  13. Development and validation of a measurement technique for interfacial velocity in liquid-gas separated flow using IR-PTV

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Geun; Kim, Hyung Dae [Dept. of Nuclear Engineering, Kyung Hee University, Seoul (Korea, Republic of)

    2015-07-15

    A measurement technique of interfacial velocity in air-water separated flow by particle tracking velocimetry using an infrared camera (IR-PTV) was developed. As infrared light with wavelength in the range of 3-5 um could hardly penetrate water, IR-PTV can selectively visualize only the tracer particles existing in depths less than 20 um underneath the air-water interface. To validate the measurement accuracy of the IR-PTV technique, a measurement of the interfacial velocity of the air-water separated flow using Styrofoam particles floating in water was conducted. The interfacial velocity values obtained with the two different measurement techniques showed good agreement with errors less than 5%. It was found from the experimental results obtained using the developed technique that with increasing air velocity, the interfacial velocity proportionally increases, likely because of the increased interfacial stress.

  14. Implications of Partial Conjugation of Whey Protein Isolate to Durian Seed Gum through Maillard Reactions: Foaming Properties, Water Holding Capacity and Interfacial Activity

    Directory of Open Access Journals (Sweden)

    Bahareh Tabatabaee Amid

    2013-12-01

    Full Text Available This paper deals with the conjugation of durian seed gum (DSG with whey protein isolate (WPI through Maillard reactions. Subsequently, the functional properties of durian seed gum in the non-conjugated (control sample and conjugated forms were compared with several commercial gums (i.e., Arabic gum, sodium alginate, kappa carrageenan, guar gum, and pectin. The current study revealed that the conjugation of durian seed gum with whey protein isolate significantly (p < 0.05 improved its foaming properties. In this study, the conjugated durian seed gum produced the most stable foam among all samples. On the other hand, the emulsion stabilized with the conjugated durian seed gum also showed more uniform particles with a larger specific surface area than the emulsion containing the non-conjugated durian seed gum. The conjugated durian seed gum showed significant different foaming properties, specific surface area, particle uniformity and water holding capacity (WHC as compared to the target polysaccharide gums. The conjugated durian seed gum showed more similar functional properties to Arabic gum rather than other studied gums.

  15. Interfacial transport processes and rheology

    CERN Document Server

    Brenner, Howard

    1991-01-01

    This textbook is designed to provide the theory, methods of measurement, and principal applications of the expanding field of interfacial hydrodynamics. It is intended to serve the research needs of both academic and industrial scientists, including chemical or mechanical engineers, material and surface scientists, physical chemists, chemical and biophysicists, rheologists, physiochemical hydrodynamicists, and applied mathematicians (especially those with interests in viscous fluid mechanics and continuum mechanics).As a textbook it provides materials for a one- or two-semester graduate-level

  16. Viruses exploiting peroxisomes.

    Science.gov (United States)

    Lazarow, Paul B

    2011-08-01

    Viruses that are of great importance for global public health, including HIV, influenza and rotavirus, appear to exploit a remarkable organelle, the peroxisome, during intracellular replication in human cells. Peroxisomes are sites of lipid biosynthesis and catabolism, reactive oxygen metabolism, and other metabolic pathways. Viral proteins are targeted to peroxisomes (the spike protein of rotavirus) or interact with peroxisomal proteins (HIV's Nef and influenza's NS1) or use the peroxisomal membrane for RNA replication. The Nef interaction correlates strongly with the crucial Nef function of CD4 downregulation. Viral exploitation of peroxisomal lipid metabolism appears likely. Mostly, functional significance and mechanisms remain to be elucidated. Recently, peroxisomes were discovered to play a crucial role in the innate immune response by signaling the presence of intracellular virus, leading to the first rapid antiviral response. This review unearths, interprets and connects old data, in the hopes of stimulating new and promising research. Copyright © 2011. Published by Elsevier Ltd.

  17. Dissemination and Exploitation Strategy

    DEFF Research Database (Denmark)

    Badger, Merete; Monaco, Lucio; Fransson, Torsten

    The research infrastructure project Virtual Campus Hub (VCH) runs from October 1, 2011 to September 30, 2013. Four technical universities in Europe, who are all active in the field of sustainable energy, form the project consortium: the Technical University of Denmark, The Royal Institute...... of Technology in Sweden, Politecnico di Torino in Italy, and Eindhoven University of Technology in the Netherlands. The project is partially funded by the European Commission under the 7th Framework Programme (project no. RI-283746). This report describes the final dissemination and exploitation strategy...... for project Virtual Campus Hub. A preliminary dissemination and exploitation plan was setup early in the project as described in the deliverable D6.1 Dissemination strategy paper - preliminary version. The plan has been revised on a monthly basis during the project’s lifecycle in connection with the virtual...

  18. Control of erosion and water pollution during exploitation of the Meirama lignites. Control de la erosion y contaminacion de las aguas en la explotacion de lignitos de Meirama

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Jimeno, E. (Lignitos de Meirama, S.A. (Spain))

    1989-01-01

    The required reclamation of land disturbed by surface coal mining often results in the creation of some slopes and soils that are prone to rapid erosion and sediment production. The are two general methods of preventing or controlling soil erosion from rainfall and water running. These two methods are the building of mechanical structures and covering the soil with live vegetation. This paper discusses the water control methods, the design of the drainage and acid water treatment plant of Lignitos de Meirama. 5 refs., 10 figs.

  19. Hacking the art of exploitation

    CERN Document Server

    Erickson, Jon

    2003-01-01

    A comprehensive introduction to the techniques of exploitation and creative problem-solving methods commonly referred to as "hacking," Hacking: The Art of Exploitation is for both technical and non-technical people who are interested in computer security. It shows how hackers exploit programs and write exploits, instead of just how to run other people's exploits. Unlike many so-called hacking books, this book explains the technical aspects of hacking, including stack based overflows, heap based overflows, string exploits, return-into-libc, shellcode, and cryptographic attacks on 802.11b.

  20. Trophic organisation and predator-prey interactions among commercially exploited demersal finfishes in the coastal waters of the southeastern Arabian Sea

    Science.gov (United States)

    Abdurahiman, K. P.; Nayak, T. H.; Zacharia, P. U.; Mohamed, K. S.

    2010-05-01

    Trophic interactions in commercially exploited demersal finfishes in the southeastern Arabian Sea of India were studied to understand trophic organization with emphasis on ontogenic diet shifts within the marine food web. In total, the contents of 4716 stomachs were examined from which 78 prey items were identified. Crustaceans and fishes were the major prey groups to most of the fishes. Based on cluster analysis of predator feeding similarities and ontogenic diet shift within each predator, four major trophic guilds and many sub-guilds were identified. The first guild 'detritus feeders' included all size groups of Cynoglossus macrostomus, Pampus argenteus, Leiognathus bindus and Priacanthus hamrur. Guild two, named 'Shrimp feeders', was the largest guild identified and included all size groups of Rhynchobatus djiddensis and Nemipterus mesoprion, medium and large Nemipterus japonicus, P. hamrur and Grammoplites suppositus, small and medium Otolithes cuvieri and small Lactarius lactarius. Guild three, named 'crab and squilla feeders', consisted of few predators. The fourth trophic guild, 'piscivores', was mainly made up of larger size groups of all predators and all size groups of Pseudorhombus arsius and Carcharhinus limbatus. The mean diet breadth and mean trophic level showed strong correlation with ontogenic diet shift. The mean trophic level varied from 2.2 ± 0.1 in large L. bindus to 4.6 ± 0.2 in large Epinephelus diacanthus and the diet breadth from 1.4 ± 0.3 in medium P. argenteus to 8.3 ± 0.2 in medium N. japonicus. Overall, the present study showed that predators in the ecosystem have a strong feeding preference for the sergestid shrimp Acetes indicus, penaeid shrimps, epibenthic crabs and detritus.

  1. Application of water quality index to evaluate groundwater quality (temporal and spatial variation) of an intensively exploited aquifer (Puebla valley, Mexico).

    Science.gov (United States)

    Salcedo-Sánchez, Edith R; Garrido Hoyos, Sofía E; Esteller Alberich, Ma Vicenta; Martínez Morales, Manuel

    2016-10-01

    The spatial and temporal variation of water quality in the urban area of the Puebla Valley aquifer was evaluated using historical and present data obtained during this investigation. The current study assessed water quality based on the Water Quality Index developed by the Canadian Council of Ministers of the Environment (CCME-WQI), which provides a mathematical framework to evaluate the quality of water in combination with a set of conditions representing quality criteria, or limits. This index is flexible regarding the type and number of variables used by the evaluation given that the variables of interest are selected according to the characteristics and objectives of development, conservation and compliance with regulations. The CCME-WQI was calculated using several variables that assess the main use of the wells in the urban area that is public supply, according to criteria for human use and consumption established by Mexican law and international standards proposed by the World Health Organization. The assessment of the index shows a gradual deterioration in the quality of the aquifer over time, as the amount of wells with excellent quality have decreased and those with lower index values (poor quality) have increased throughout the urban area of the Puebla Valley aquifer. The parameters affecting groundwater quality are: total dissolved solids, sulfate, calcium, magnesium and total hardness.

  2. The Effects of Excipients on Protein Aggregation During Agitation: An Interfacial Shear Rheology Study

    OpenAIRE

    Liu, Lu; Qi, Wei; Schwartz, Daniel K.; Randolph, Theodore W.; Carpenter, John F.

    2013-01-01

    We investigated the effects of excipients in solutions of keratinocyte growth factor 2 (KGF-2) on protein aggregation during agitation as well as on interfacial shear rheology at the air-water interface. Samples were incubated with or without agitation, and in the presence or absence of the excipients heparin, sucrose or polysorbate 80 (PS80). The effect of excipients on the extent of protein aggregation was determined by UV spectroscopy and microflow imaging (MFI). Interfacial shear rheology...

  3. Effects of carbon fiber surface characteristics on interfacial bonding of epoxy resin composite subjected to hygrothermal treatments

    Science.gov (United States)

    Li, Min; Liu, Hongxin; Gu, Yizhuo; Li, Yanxia; Zhang, Zuoguang

    2014-01-01

    The changes of interfacial bonding of three types of carbon fibers/epoxy resin composite as well as their corresponding desized carbon fiber composites subjecting to hygrothermal conditions were investigated by means of single fiber fragmentation test. The interfacial fracture energy was obtained to evaluate the interfacial bonding before and after boiling water aging. The surface characteristics of the studied carbon fiber were characterized using X-ray photoelectron spectroscopy. The effects of activated carbon atoms and silicon element at carbon fiber surface on the interfacial hygrothermal resistance were further discussed. The results show that the three carbon fiber composites with the same resin matrix possess different hygrothermal resistances of interface and the interfacial fracture energy after water aging can not recovery to the level of raw dry sample (irreversible changes) for the carbon fiber composites containing silicon. Furthermore, the activated carbon atoms have little impact on the interfacial hygrothermal resistance. The irreversible variations of interfacial bonding and the differences among different carbon fiber composites are attributed to the silicon element on the carbon fiber bodies, which might result in hydrolyzation in boiling water treatment and degrade interfacial hygrothermal resistance.

  4. Salinity Influence on Interfacial Area, Wettability, and NAPL Recovery

    Science.gov (United States)

    Zhong, L.; Valenta, M. M.

    2007-12-01

    Wettability, the tendency of rock or sediment particle surfaces to be preferentially wet by one fluid phase, has a strong influence on the distribution and flow of immiscible fluids in oil reservoirs or aquifers. The efficiency of oil and non-aqueous phase liquid (NAPL) recovery processes and the displacement and production of oil/NAPL by fluids injected into the reservoir or aquifer depend on the wetting properties of the rock/sediment particle surfaces. Effects of salinity on wettability and residual oil saturation during water flooding are of particular interest in the petroleum industry with some reservoirs. It was indicated that the residual oil saturation may be reduced significantly by flooding with low salinity water instead of seawater or brine. This observation may be also true in NAPL recovery from contaminated aquifers. NAPL recovery enhancement may be achieved by manipulating the salinity of the remedial fluid. Two sets of 8 core-flooding column experiments have been completed, using decane and Alaska North Slope (ANS) crude oil as surrogate NAPLs. Unconsolidated sand packs were used as representative porous media. NAPL removal was conducted by flushing column at residual NAPL saturation using water with salinity ranging from 0% to 8% wt of NaCl. The NAPL-water interfacial area (anw, cm-1) was measured and used as an indicator for the wettability characteristics of the packed sand. Sodium Dodecyl Benzene Sulfonate (SDBS) was used as an interfacial partitioning tracer and Pentafluoro Benzoic acid (PFBA) was used as a non-reactive and non-partitioning tracer. NAPL was imbibed into an initially water saturated column, using positive displacement methods. NAPL was then flushed out using water at certain salinity. When the column attained a residual NAPL saturation after each water flushing displacement, the partitioning and conservative tracer experiments were conducted separately, to characterize the specific NAPL-water interfacial areas, and the

  5. Fundamental interfacial mechanisms underlying electrofreezing.

    Science.gov (United States)

    Acharya, Palash V; Bahadur, Vaibhav

    2017-12-08

    This article reviews the fundamental interfacial mechanisms underlying electrofreezing (promotion of ice nucleation via the application of an electric field). Electrofreezing has been an active research topic for many decades, with applications in food preservation, cryopreservation, cryogenics and ice formation. There is substantial literature detailing experimental and simulations-based studies, which aim to understand the complex mechanisms underlying accelerated ice nucleation in the presence of electric fields and electrical charge. This work provides a critical review of all such studies. It is noted that application-focused studies of electrofreezing are excluded from this review; such studies have been previously reviewed in literature. This review focuses only on fundamental studies, which analyze the physical mechanisms underlying electrofreezing. Topics reviewed include experimental studies on electrofreezing (DC and AC electric fields), pyroelectricity-based control of freezing, molecular dynamics simulations of electrofreezing, and thermodynamics-based explanations of electrofreezing. Overall, it is seen that electrofreezing can enable disruptive advancements in the control of liquid-to-solid phase change, and that our current understanding of the underlying mechanisms can be significantly improved through further studies of various interfacial effects coming into play. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Sinusoidal Forcing of Interfacial Films

    Science.gov (United States)

    Rasheed, Fayaz; Raghunandan, Aditya; Hirsa, Amir; Lopez, Juan

    2015-11-01

    Fluid transport, in vivo, is accomplished via pumping mechanisms of the heart and lungs, which results in biological fluids being subjected to oscillatory shear. Flow is known to influence biological macromolecules, but predicting the effect of shear is incomplete without also accounting for the influence of complex interfaces ubiquitous throughout the body. Here, we investigated the oscillatory response of the structure of aqueous interfacial films using a cylindrical knife edge viscometer. Vitamin K1 was used as a model monolayer because its behaviour has been thoroughly quantified and it doesn't show any measurable hysteresis. The monolayer was subjected to sinusoidal forcing under varied conditions of surface concentrations, periodic frequencies, and knife edge amplitudes. Particle Image Velocimetry(PIV) data was collected using Brewster Angle Microscopy(BAM), revealing the influence of oscillatory interfacial shear stress on the monolayer. Insights were gained as to how the velocity profile dampens at specific distances from the knife edge contact depending on the amplitude, frequency, and concentration of Vitamin K1. Supported by NNX13AQ22G, National Aeronautics and Space Administration.

  7. The Geohazards Exploitation Platform

    Science.gov (United States)

    Laur, Henri; Casu, Francesco; Bally, Philippe; Caumont, Hervé; Pinto, Salvatore

    2016-04-01

    The Geohazards Exploitation Platform, or Geohazards TEP (GEP), is an ESA originated R&D activity of the EO ground segment to demonstrate the benefit of new technologies for large scale processing of EO data. This encompasses on-demand processing for specific user needs, systematic processing to address common information needs of the geohazards community, and integration of newly developed processors for scientists and other expert users. The platform supports the geohazards community's objectives as defined in the context of the International Forum on Satellite EO and Geohazards organised by ESA and GEO in Santorini in 2012. The GEP is a follow on to the Supersites Exploitation Platform (SSEP) an ESA initiative to support the Geohazards Supersites & Natural Laboratories initiative (GSNL). Today the GEP allows to exploit 70+ Terabyte of ERS and ENVISAT archive and the Copernicus Sentinel-1 data available on line. The platform has already engaged 22 European early adopters in a validation activity initiated in March 2015. Since September, this validation has reached 29 single user projects. Each project is concerned with either integrating an application, running on demand processing or systematically generating a product collection using an application available in the platform. The users primarily include 15 geoscience centres and universities based in Europe: British Geological Survey (UK), University of Leeds (UK), University College London (UK), ETH University of Zurich (CH), INGV (IT), CNR-IREA and CNR-IRPI (IT), University of L'Aquila (IT), NOA (GR), Univ. Blaise Pascal & CNRS (FR), Ecole Normale Supérieure (FR), ISTERRE / University of Grenoble-Alpes (FR). In addition, there are users from Africa and North America with the University of Rabat (MA) and the University of Miami (US). Furthermore two space agencies and four private companies are involved: the German Space Research Centre DLR (DE), the European Space Agency (ESA), Altamira Information (ES

  8. Exploitative Learning by Exporting

    DEFF Research Database (Denmark)

    Golovko, Elena; Lopes Bento, Cindy; Sofka, Wolfgang

    Decisions on entering foreign markets are among the most challenging but also potentially rewarding strategy choices managers can make. In this study, we examine the effect of export entry on the firm investment decisions in two activities associated with learning about new technologies...... and learning about new markets ? R&D investments and marketing investments, in search of novel insights into the content and process underlying learning by exporting. We draw from organizational learning theory for predicting changes in both R&D and marketing investment patterns that accompany firm entry......, it is predominantly the marketing-related investment decisions associated with starting to export that lead to increases in firm productivity. We conclude that learning-by-exporting might be more properly characterized as ?learning about and exploiting new markets? rather than ?learning about new technologies...

  9. Image exploitation for MISAR

    Science.gov (United States)

    Heinze, N.; Edrich, M.; Saur, G.; Krüger, W.

    2007-04-01

    The miniature SAR-system MiSAR has been developed by EADS Germany for lightweight UAVs like the LUNASystem. MiSAR adds to these tactical UAV-systems the all-weather reconnaissance capability, which is missing until now. Unlike other SAR sensors, that produce large strip maps at update rates of several seconds, MiSAR generates sequences of SAR images with approximately 1 Hz frame rate. photo interpreters (PI) of tactical drones, now mainly experienced with visual interpretation, are not used to SARimages, especially not with SAR-image sequence characteristics. So they should be supported to improve their ability to carry out their task with a new, demanding sensor system. We have therefore analyzed and discussed with military PIs in which task MiSAR can be used and how the PIs can be supported by special algorithms. We developed image processing- and exploitation-algorithms for such SAR-image sequences. A main component is the generation of image sequence mosaics to get more oversight. This mosaicing has the advantage that also non straight /linear flight-paths and varying squint angles can be processed. Another component is a screening-component for manmade objects to mark regions of interest in the image sequences. We use a classification based approach, which can be easily adapted to new sensors and scenes. These algorithms are integrated into an image exploitation system to improve the image interpreters ability to get a better oversight, better orientation and helping them to detect relevant objects, especially considering long endurance reconnaissance missions.

  10. Learning Metasploit exploitation and development

    CERN Document Server

    Balapure, Aditya

    2013-01-01

    A practical, hands-on tutorial with step-by-step instructions. The book will follow a smooth and easy-to-follow tutorial approach, covering the essentials and then showing the readers how to write more sophisticated exploits.This book targets exploit developers, vulnerability analysts and researchers, network administrators, and ethical hackers looking to gain advanced knowledge in exploitation development and identifying vulnerabilities. The primary goal is to take readers wishing to get into more advanced exploitation discovery and reaching the next level.Prior experience exploiting basic st

  11. Interfacial phenomena at a surface of partially silylated nanosilica.

    Science.gov (United States)

    Gun'ko, V M; Turov, V V; Myronyuk, I F; Goncharuk, O V; Pakhlov, E M; Bezruka, N A; Skwarek, E; Janusz, W; Blitz, J P

    2014-11-15

    Unmodified pyrogenic silica PS300 and partially silylated nanosilica samples at a degree of substitution of surface silanols by trimethylsilyl (TMS) groups Θ(TMS)=27.2% and 37.2% were studied to elucidate features of the interfacial behavior of water adsorbed alone, or co-adsorbed with methane, hydrogen, or trifluoroacetic acid (TFAA). In the aqueous suspension modified PS300 at Θ(TMS)=37.2% forms aggregates of 50-200 nm in size and can bind significant amounts of water (up to ∼5 g/g). Only 0.5 g/g of this water is strongly bound, while the major fraction of water is weakly bound. The presence of surface TMS groups causes the appearance of weakly associated water (WAW) at the interfaces. The adsorption of methane and hydrogen onto TMS-nanosilica with pre-adsorbed water (hydration degree h=0.05 or 0.005 g/g) increases with increasing temperature. In weakly polar CDCl3 medium, interfacial water exists in strongly (SAW, chemical shift δ(H)=4-5 ppm) and weakly (δ(H)=1-2 ppm) associated states, as well as strongly (changes in the Gibbs free energy -ΔG>0.5-0.8 kJ/mol) and weakly (-ΔGsurface can dissolve TFAA. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. Nanoparticles at fluid interfaces: exploiting capping ligands to control adsorption, stability and dynamics.

    Science.gov (United States)

    Garbin, Valeria; Crocker, John C; Stebe, Kathleen J

    2012-12-01

    Nanoparticle self-assembly at fluid-fluid interfaces has been traditionally exploited in emulsification, encapsulation and oil recovery, and more recently in emerging applications including functional nanomaterials and biphasic catalysis. We provide a review of the literature focusing on the open challenges that still hamper the broader applicability of this potentially transformative technology, and we outline strategies to achieve improved control over interfacial self-assembly of nanoparticles. First, we discuss means to promote spontaneous adsorption by tuning the interfacial energies of the nanoparticles with the fluids using capping ligands, and the occurrence of energy barriers. We then examine the interactions between interfacial nanoparticles and how they affect the formation of equilibrium interfacial suspensions versus non-equilibrium two-dimensional phases, such as weakly attractive glasses and gels. Important differences with colloidal interactions in a bulk suspension arise due to the discontinuity in solvent properties at the interface. For instance, ligand brushes rearrange in asymmetric configurations, and thus play a significant role in determining interparticle interactions. Finally, we briefly discuss the link between interfacial microstructure and the dynamic response of particle-laden interfaces, including interfacial rheology and the fate of nanoparticle monolayers upon out-of-plane deformation. Copyright © 2012 Elsevier Inc. All rights reserved.

  13. The Interfacial-Area-Based Relative Permeability Function

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z. F.; Khaleel, Raziuddin

    2009-09-25

    CH2M Hill Plateau Remediation Company (CHPRC) requested the services of the Pacific Northwest National Laboratory (PNNL) to provide technical support for the Remediation Decision Support (RDS) activity within the Soil & Groundwater Remediation Project. A portion of the support provided in FY2009, was to extend the soil unsaturated hydraulic conductivity using an alternative approach. This alternative approach incorporates the Brooks and Corey (1964), van Genuchten (1980), and a modified van Genuchten water-retention models into the interfacial-area-based relative permeability model presented by Embid (1997). The general performance of the incorporated models is shown using typical hydraulic parameters. The relative permeability models for the wetting phase were further examined using data from literature. Results indicate that the interfacial-area-based model can describe the relative permeability of the wetting phase reasonably well.

  14. Effect of hygroscopic expansion of resin filling on interfacial gap and sealing: a confocal microscopy study.

    Science.gov (United States)

    Rosales-Leal, Juan I; Castillo-Salmerón, Ramón Del; Molino-Serrano, María A; González-Moreira, Humberto; Cabrerizo-Vílchez, Miguel A

    2013-10-01

    To measure dimensional changes due to hygroscopic expansion and their effect on interface gaps and sealing in four light-cured restorative materials using an original confocal microscopic methodology. The materials tested were an ormocer (Admira [Voco]), a compomer (Dyract AP [Dentsply]), a hybrid composite (Spectrum [Dentsply]), and a nanohybrid composite (Esthet·X [Dentsply]). Water sorption was evaluated by weighing material disks after immersion. Hygroscopic expansion was measured from volumetric variations of material fillings in cylindrical cavities in dentin slices; the interfacial gap size was obtained from the same cavities using a novel confocal microscopic method. Microleakage was evaluated in cavities prepared in extracted third molars. Measurements followed water immersion for 24 h, 1 week, 4 weeks, and 8 weeks. A factorial ANOVA, the Student Newman Keuls test for post-hoc comparisons, the Student's t-test, and the Pearson test were used for the statistical analysis (p hygroscopic expansion, and sealing. Hygroscopic expansion reduced post-polymerization interfacial gaps and improved cavity sealing. Dyract AP and Admira showed the highest water sorption, hygroscopic expansion, and gap size reduction. 1. The proposed methodology is valid to measure hygroscopic expansion and interfacial gap. 2. Water sorption and hygroscopic expansion are positively correlated, and hygroscopic expansion, gap size, and sealing are also positively correlated. 3. The adhesive influences the interfacial gap size and its variation after hygroscopic expansion. 4. Hygroscopic expansion reduces the interfacial gaps generated by polymerization shrinkage and improves cavity sealing.

  15. Adsorption and conformations of lysozyme and α-lactalbumin at a water-octane interface

    Science.gov (United States)

    Cheung, David L.

    2017-11-01

    As proteins contain both hydrophobic and hydrophilic amino acids, they will readily adsorb onto interfaces between water and hydrophobic fluids such as oil. This adsorption normally causes changes in the protein structure, which can result in loss of protein function and irreversible adsorption, leading to the formation of protein interfacial films. While this can be advantageous in some applications (e.g., food technology), in most cases it limits our ability to exploit protein functionality at interfaces. To understand and control protein interfacial adsorption and function, it is necessary to understand the microscopic conformation of proteins at liquid interfaces. In this paper, molecular dynamics simulations are used to investigate the adsorption and conformation of two similar proteins, lysozyme and α-lactalbumin, at a water-octane interface. While they both adsorb onto the interface, α-lactalbumin does so in a specific orientation, mediated by two amphipathic helices, while lysozyme adsorbs in a non-specific manner. Using replica exchange simulations, both proteins are found to possess a number of distinct interfacial conformations, with compact states similar to the solution conformation being most common for both proteins. Decomposing the different contributions to the protein energy at oil-water interfaces suggests that conformational change for α-lactalbumin, unlike lysozyme, is driven by favourable protein-oil interactions. Revealing these differences between the factors that govern the conformational change at interfaces in otherwise similar proteins can give insight into the control of protein interfacial adsorption, aggregation, and function.

  16. Bubble detachment assisted by electrowetting-driven interfacial wave

    Science.gov (United States)

    Xu, Haolun; Yan, Run; Wang, Sheng; Chen, Chung-Lung

    2017-10-01

    This article investigates both theoretically and numerically a novel mechanism of bubble detachment by an electrowetting-driven interfacial wave, inspired by droplet control and manipulation via electrowetting. Electrowetting-on-dielectric can be used to modulate the contact point movement at the water-air interface in a thin liquid film. Rapid oscillation of the contact line is achieved by a swift change of voltage under an AC signal. When disturbed with such contact angle changes, the interfacial wave between two immiscible fluids disrupts bubble dynamics. Numerical modeling reveals that an air bubble on a hydrophobic surface can be detached by the trough of such a wave. The frequency of the interfacial wave is twice the voltage frequency. A higher voltage frequency leads to a smaller amplitude and higher celerity of the wave, while a lower voltage frequency leads to a larger wave amplitude and lower celerity. The bubble can easily detach when the voltage frequency is 10 Hz. However, the bubble fails to detach when the voltage frequency is 100 Hz. This approach can be useful to improve two-phase cooling performance.

  17. Nanomechanical Sensing of Biological Interfacial Interactions

    Science.gov (United States)

    Du, Wenjian

    between cellulose layers monitored by means of the atomic force microscopy (AFM), the current study shows that water molecules can efficiently reduce the energy required for separating two layers of cellulose bilayers during hydration of cellulose bilayer nanoparticles. The findings of the study contribute to explicating the mechanism of cellulose the decrystallization, a free-energetically unfavorable process, through enzymatic hydrolysis of cellulase. The study also investigates the application of a cell-based microcantilever sensor to monitor the real-time ligand-induced response of living cells. These nanomechanical approaches offer unique perspectives on the interfacial activities of biological molecules.

  18. Coupled Interfacial Tension and Phase Behavior Model Based on Micellar Curvatures

    KAUST Repository

    Torrealba, V. A.

    2017-11-08

    This article introduces a consistent and robust model that predicts interfacial tensions for all microemulsion Winsor types and overall compositions. The model incorporates film bending arguments and Huh\\'s equation and is coupled to phase behavior so that simultaneous tuning of both interfacial tension (IFT) and phase behavior is possible. The oil-water interfacial tension and characteristic length are shown to be related to each other through the hydrophilic-lipophilic deviation (HLD). The phase behavior is tied to the micelle curvatures, without the need for using the net average curvature (NAC). The interfacial tension model is related to solubilization ratios in order to introduce a coupled interfacial tension-phase behavior model for all phase environments. The approach predicts two- and three-phase interfacial tensions and phase behavior (i.e., tie lines and tie triangles) for changes in composition and HLD input parameters, such as temperature, pressure, surfactant structure, and oil equivalent alkane carbon number. Comparisons to experimental data show excellent fits and predictive capability.

  19. Modeling interfacial fracture in Sierra.

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Arthur A.; Ohashi, Yuki; Lu, Wei-Yang; Nelson, Stacy A. C.; Foulk, James W.,; Reedy, Earl David,; Austin, Kevin N.; Margolis, Stephen B.

    2013-09-01

    This report summarizes computational efforts to model interfacial fracture using cohesive zone models in the SIERRA/SolidMechanics (SIERRA/SM) finite element code. Cohesive surface elements were used to model crack initiation and propagation along predefined paths. Mesh convergence was observed with SIERRA/SM for numerous geometries. As the funding for this project came from the Advanced Simulation and Computing Verification and Validation (ASC V&V) focus area, considerable effort was spent performing verification and validation. Code verification was performed to compare code predictions to analytical solutions for simple three-element simulations as well as a higher-fidelity simulation of a double-cantilever beam. Parameter identification was conducted with Dakota using experimental results on asymmetric double-cantilever beam (ADCB) and end-notched-flexure (ENF) experiments conducted under Campaign-6 funding. Discretization convergence studies were also performed with respect to mesh size and time step and an optimization study was completed for mode II delamination using the ENF geometry. Throughout this verification process, numerous SIERRA/SM bugs were found and reported, all of which have been fixed, leading to over a 10-fold increase in convergence rates. Finally, mixed-mode flexure experiments were performed for validation. One of the unexplained issues encountered was material property variability for ostensibly the same composite material. Since the variability is not fully understood, it is difficult to accurately assess uncertainty when performing predictions.

  20. Interfacial Behavior of Polymer Coated Nanoparticle

    Science.gov (United States)

    Qi, Luqing; Shamsijazeyi, Hadi; Mann, Jason; Verduzco, Rafael; Hirasaki, George; Rice University Team

    2015-03-01

    Oxidized carbon black (OCB) nanoparticle is functionalized with different coatings, i.e. alkyl group, polyvinyl alcohol (PVA) and partially sulfonated polyvinyl alcohol (sPVA). In oil and water systems, the functionalized nanoparticle is found to have a versatile dispersion i.e. in lower aqueous phase, in upper oil phase, or in middle phase microemulsion. Oil substitute n-octane and commercial oil IOSPAR have been test as oil phase; series of commercially available surfactant, C12-4,5 orthoxylene sulfonate(OXS), i-C13-(PO)7 -SO4Na (S13B), surfactant blend of anionic Alfoterra with nonionic Tergitol have been test as additive to help with the OCB dispersion. It is found that the OCB with sulfonated polyvinyl alcohol attachment (sPVA-OCB) stays in microemulsion; with the increase of salinity, it follows the microemulsion to go from lower phase, to middle phase, and to upper phase. The dispersion of sPVA and alkyl functionalized OCB (Cn-OCB-sPVA) is the balance of the length of alkyl and sPVA and the degree of sulfonation of PVA, depending on which, it can either disperse into microemulsion or form a separate layer. The sPVA-OCB also indicates a tolerance of high salinity; this is shown by the stable dispersion of it in blend surfactant solution of anionic Alfoterra and nonionic Tergitol at high salinity API brine(8% NaCl and 2% CaCl2). The study of different functionality on OCB dispersion can help design appropriate modified nanoparticle as additive for enhanced oil recovery either to reduce the interfacial tension between oil and water, or to stabilize microemulsion.

  1. The effects of excipients on protein aggregation during agitation: an interfacial shear rheology study.

    Science.gov (United States)

    Liu, Lu; Qi, Wei; Schwartz, Daniel K; Randolph, Theodore W; Carpenter, John F

    2013-08-01

    We investigated the effects of excipients in solutions of keratinocyte growth factor 2 (KGF-2) on protein aggregation during agitation as well as on interfacial shear rheology at the air-water interface. Samples were incubated with or without agitation, and in the presence or absence of the excipients heparin, sucrose, or polysorbate 80 (PS80). The effect of excipients on the extent of protein aggregation was determined by UV-visible spectroscopy and micro-flow imaging. Interfacial shear rheology was used to detect the gelation time and strength of protein gels at the air-water interface. During incubation, protein particles of size ≥1 μm and insoluble aggregates formed faster for KGF-2 solutions subjected to agitation. Addition of either heparin or sucrose promoted protein aggregation during agitation. In contrast, PS80 substantially inhibited agitation-induced KGF-2 aggregation but facilitated protein particulate formation in quiescent solutions. The combination of PS80 and heparin or sucrose completely prevented protein aggregation during both nonagitated and agitated incubations. Interfacial rheological measurements showed that KGF-2 in buffer alone formed an interfacial gel within a few minutes. In the presence of heparin, KGF-2 interfacial gels formed too quickly for gelation time to be determined. KGF-2 formed gels in about 10 min in the presence of sucrose. The presence of PS80 in the formulation inhibited gelation of KGF-2. Furthermore, the interfacial gels formed by the protein in the absence of PS80 were reversible when PS80 was added to the samples after gelation. Therefore, there is a correspondence between formulations that exhibited interfacial gelation and formulations that exhibited agitation-induced aggregation. Copyright © 2013 Wiley Periodicals, Inc.

  2. Interfacial Engineering of Molecular Photovoltaics

    Science.gov (United States)

    Shelton, Steven Wade

    One of the most worthy pursuits in the field of organic solar cells is that of discovering ways to more effectively harvest charge generated by light absorption. The measure of the efficacy of this process is the external quantum efficiency (EQE). It is determined by the efficiency of incident light absorption, exciton diffusion, exciton splitting and charge transfer, and charge collection. Enhanced EQE can be realized by engineering interfaces between materials in the device to allow for smoother charge transfer throughout the extent of the device, which is usually between 10 and 200 nanometers. Improvements in charge transport are vitally important because the photogenerated excitons in electron donating polymers and small molecules typically only diffuse between 5 and 10 nanometers. These excitons must reach the interface between the electron donor and electron acceptor in order to be split so that the resulting electron and hole can be harvested at the cathode and anode, respectively. The aim of much of this dissertation is to describe a method by which the donor-acceptor interfacial area can be augmented using nanoimprint lithography, first with a single donor and then with multiple donors. Nanoimprint lithography is introduced as a simple embossing technique that can create features in a single component donor with dimensions as small as 20 nm. Solution-processable small molecules are of interest for their ease of synthesis and fabrication. I continue the discussion of nanoimprint lithography by offering candidates for a two-component donor combination. A two-component donor can extend the absorption range across a broader portion of the solar spectrum than just one donor to improve energy harvesting. After considering ways of optimizing the donor-acceptor interface, I describe the use of a charge selective layer for better charge transport and collection. When incorporated into a bilayer solar cell and an inverted solar cell, these two molecules markedly

  3. Interfacial phase-change memory.

    Science.gov (United States)

    Simpson, R E; Fons, P; Kolobov, A V; Fukaya, T; Krbal, M; Yagi, T; Tominaga, J

    2011-07-03

    Phase-change memory technology relies on the electrical and optical properties of certain materials changing substantially when the atomic structure of the material is altered by heating or some other excitation process. For example, switching the composite Ge(2)Sb(2)Te(5) (GST) alloy from its covalently bonded amorphous phase to its resonantly bonded metastable cubic crystalline phase decreases the resistivity by three orders of magnitude, and also increases reflectivity across the visible spectrum. Moreover, phase-change memory based on GST is scalable, and is therefore a candidate to replace Flash memory for non-volatile data storage applications. The energy needed to switch between the two phases depends on the intrinsic properties of the phase-change material and the device architecture; this energy is usually supplied by laser or electrical pulses. The switching energy for GST can be reduced by limiting the movement of the atoms to a single dimension, thus substantially reducing the entropic losses associated with the phase-change process. In particular, aligning the c-axis of a hexagonal Sb(2)Te(3) layer and the 〈111〉 direction of a cubic GeTe layer in a superlattice structure creates a material in which Ge atoms can switch between octahedral sites and lower-coordination sites at the interface of the superlattice layers. Here we demonstrate GeTe/Sb(2)Te(3) interfacial phase-change memory (IPCM) data storage devices with reduced switching energies, improved write-erase cycle lifetimes and faster switching speeds.

  4. POROUS MICROSTRUCTURE OF THE INTERFACIAL TRANSITION ZONE IN GEOPOLYMER COMPOSITES

    Directory of Open Access Journals (Sweden)

    Steinerová M.

    2013-12-01

    Full Text Available The study deals with a comparison of the differences in the structure, composition and micromechanical properties of a metakaolinite geopolymer composite matrix, inside and outside of the interfacial transition zone (ITZ with quartz grains of added silica sand. The microstructure is investigated by a measurement of the mercury porosimetry, microscopy and by a measurement in SEM and AFM, completed by Raman spectroscopy. Weaker mechanical properties, micropores in the ITZ, a higher concentration of Al atoms and hydroxyl groups than in the ambient matrix were detected. The water transport is probably the reason for the micropore formation, caused by disequilibrium in the course of solid-phase building from geopolymer dispersion.

  5. Interfacial and near interfacial crack growth phenomena in metal bonded alumina

    Energy Technology Data Exchange (ETDEWEB)

    Kruzic, Jamie Joseph [Univ. of California, Berkeley, CA (United States)

    2001-01-01

    Metal/ceramic interfaces can be found in many engineering applications including microelectronic packaging, multi-layered films, coatings, joints, and composite materials. In order to design reliable engineering systems that contain metal/ceramic interfaces, a comprehensive understanding of interfacial and near interfacial failure mechanisms is necessary.

  6. Social exploitation of vitellogenin.

    Science.gov (United States)

    Amdam, Gro V; Norberg, Kari; Hagen, Arne; Omholt, Stig W

    2003-02-18

    Vitellogenin is a female-specific glucolipoprotein yolk precursor produced by all oviparous animals. Vitellogenin expression is under hormonal control, and the protein is generally synthesized directly before yolk deposition. In the honeybee (Apis mellifera), vitellogenin is not only synthesized by the reproductive queen, but also by the functionally sterile workers. In summer, the worker population consists of a hive bee group performing a multitude of tasks including nursing inside the nest, and a forager group specialized in collecting nectar, pollen, water, and propolis. Vitellogenin is synthesized in large quantities by hive bees. When hive bees develop into foragers, their juvenile hormone titers increase, and this causes cessation of their vitellogenin production. This inverse relationship between vitellogenin synthesis and juvenile hormone is opposite to the norm in insects, and the underlying proximate processes and life-history reasons are still not understood. Here we document an alternative use of vitellogenin by showing that it is a source for the proteinaceous royal jelly that is produced by the hive bees. Hive bees use the jelly to feed larvae, queen, workers, and drones. This finding suggests that the evolution of a brood-rearing worker class and a specialized forager class in an advanced eusocial insect society has been directed by an alternative utilization of yolk protein.

  7. Interfacial rheological properties of self-assembling biopolymer microcapsules.

    Science.gov (United States)

    Xie, Kaili; de Loubens, Clément; Dubreuil, Frédéric; Gunes, Deniz Z; Jaeger, Marc; Léonetti, Marc

    2017-09-20

    Tuning the mechanical properties of microcapsules through a cost-efficient route of fabrication is still a challenge. The traditional method of layer-by-layer assembly of microcapsules allows building a tailored composite multi-layer membrane but is technically complex as it requires numerous steps. The objective of this article is to characterize the interfacial rheological properties of self-assembling biopolymer microcapsules that were obtained in one single facile step. This thorough study provides new insights into the mechanics of these weakly cohesive membranes. Firstly, suspensions of water-in-oil microcapsules were formed in microfluidic junctions by self-assembly of two oppositely charged polyelectrolytes, namely chitosan (water soluble) and phosphatidic fatty acid (oil soluble). In this way, composite membranes of tunable thickness (between 40 and 900 nm measured by AFM) were formed at water/oil interfaces in a single step by changing the composition. Secondly, microcapsules were mechanically characterized by stretching them up to break-up in an extensional flow chamber which extends the relevance and convenience of the hydrodynamic method to weakly cohesive membranes. Finally, we show that the design of microcapsules can be 'engineered' in an extensive way since they present a wealth of interfacial rheological properties in terms of elasticity, plasticity and yield stress whose magnitudes can be controlled by the composition. These behaviors are explained by the variation of the membrane thickness with the physico-chemical parameters of the process.

  8. Characterization of interfacial waves in horizontal core-annular flow

    Science.gov (United States)

    Tripathi, Sumit; Bhattacharya, Amitabh; Singh, Ramesh; Tabor, Rico F.

    2016-11-01

    In this work, we characterize interfacial waves in horizontal core annular flow (CAF) of fuel-oil and water. Experimental studies on CAF were performed in an acrylic pipe of 15.5mm internal diameter, and the time evolution of the oil-water interface shape was recorded with a high speed camera for a range of different flow-rates of oil (Qo) and water (Qw). The power spectrum of the interface shape shows a range of notable features. First, there is negligible energy in wavenumbers larger than 2 π / a , where a is the thickness of the annulus. Second, for high Qo /Qw , there is no single dominant wavelength, as the flow in the confined annulus does not allow formation of a preferred mode. Third, for lower Qo /Qw , a dominant mode arises at a wavenumber of 2 π / a . We also observe that the power spectrum of the interface shape depends weakly on Qw, and strongly on Qo, perhaps because the net shear rate in the annulus appears to depend weakly on Qw as well. We also attempt to build a general empirical model for CAF by relating the interfacial stress (calculated via the mean pressure gradient) to the flow rate in the annulus, the annular thickness and the core velocity. Authors are thankful to Orica Mining Services (Australia) for the financial support.

  9. Interfacial area and interfacial transfer in two-phase systems. DOE final report

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, Mamoru; Hibiki, T.; Revankar, S.T.; Kim, S.; Le Corre, J.M.

    2002-07-01

    In the two-fluid model, the field equations are expressed by the six conservation equations consisting of mass, momentum and energy equations for each phase. The existence of the interfacial transfer terms is one of the most important characteristics of the two-fluid model formulation. The interfacial transfer terms are strongly related to the interfacial area concentration and to the local transfer mechanisms such as the degree of turbulence near interfaces. This study focuses on the development of a closure relation for the interfacial area concentration. A brief summary of several problems of the current closure relation for the interfacial area concentration and a new concept to overcome the problem are given.

  10. Oscillating drop/bubble tensiometry: effect of viscous forces on the measurement of interfacial tension.

    Science.gov (United States)

    Freer, E M; Wong, H; Radke, C J

    2005-02-01

    The oscillating drop/bubble technique is increasingly popular for measuring the interfacial dilatational properties of surfactant/polymer-laden fluid/fluid interfaces. A caveat of this technique, however, is that viscous forces are important at higher oscillation frequencies or fluid viscosities; these can affect determination of the interfacial tension. Here, we experimentally quantify the effect of viscous forces on the interfacial-tension measurement by oscillating 100 and 200 cSt poly(dimethylsiloxane) (PDMS) droplets in water at small amplitudes and frequencies ranging between 0.01 and 1 Hz. Due to viscous forces, the measured interfacial tension oscillates sinusoidally with the same frequency as the oscillation of the drop volume. The tension oscillation precedes that of the drop volume, and the amplitude varies linearly with Capillary number, Ca=DeltamuomegaDeltaV/gammaa(2), where Deltamu=mu(D)-mu is the difference between the bulk Newtonian viscosities of the drop and surrounding continuous fluid, omega is the oscillation frequency of the drop, DeltaV is the amplitude of volume oscillation, gamma is the equilibrium interfacial tension between the PDMS drop and water, and a is the radius of the capillary. A simplified model of a freely suspended spherical oscillating-drop well explains these observations. Viscous forces distort the drop shape at Ca>0.002, although this criterion is apparatus dependent.

  11. Temperature dependence of interfacial properties and viscosity of nanofluids for droplet-based microfluidics

    Energy Technology Data Exchange (ETDEWEB)

    Murshed, S M Sohel; Tan, Say-Hwa; Nguyen, Nam-Trung [School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore 639798 (Singapore)], E-mail: mntnguyen@ntu.edu.sg

    2008-04-21

    Interfacial tension and viscosity of a liquid play an important role in microfluidic systems. In this study, temperature dependence of surface tension, interfacial tension and viscosity of a nanofluid are investigated for its applicability in droplet-based microfluidics. Experimental results show that nanofluids having TiO{sub 2} nanoparticles of 15 nm diameter in deionized water exhibit substantially smaller surface tension and oil-based interfacial tension than those of the base fluid (i.e. deionized water). These surface and interfacial tensions of this nanofluid were found to decrease almost linearly with increasing temperature. The Brownian motion of nanoparticles in the base fluid was identified as a possible mechanism for reduced surface and interfacial tensions of the nanofluid. The measured effective viscosity of the nanofluid was found to be insignificantly higher than that of the base fluid and to decrease with increasing fluid temperature. The dependence on the temperature of the droplet formation at the T-junction of a microfluidic device is also studied and the nanofluid shows larger droplet size compared with its base fluid.

  12. Commercial sexual exploitation of children

    National Research Council Canada - National Science Library

    Mauricio Rojas Betancur; Raquel Mendez Villamizar; Diana Lucía Moreno

    2012-01-01

      We study the sexual exploitation of children contributing to the understanding of risk and situations favouring the entry and permanence of children and adolescents from the reconstruction of the...

  13. Bulk and Interfacial Aqueous Fluoride: An Investigation via First Principles Molecular Dynamics

    OpenAIRE

    Ho, Ming-Hsun; Klein, Michael L.; Kuo, I-F. William

    2009-01-01

    Using first principles molecular dynamics simulation, we have studied a fluoride anion embedded in a periodically replicated water slab composed of 215 water molecules to mimic both bulk and interfacial solvation. In contrast to some recent experiments, our findings suggest that there are only small structural changes for fluoride and its first solvation shell in the bulk. Moreover, the presence of fluoride does not significantly alter the rotational dynamics of nearby water. In addition, we ...

  14. Fullerene C60: Surface Energy and Interfacial Interactions in Aqueous Systems

    Science.gov (United States)

    The underlying mechanisms of fullerene−fullerene, fullerene−water, and fullerene−soil surface interactions in aqueous systems are not well understood. To advance our understanding of these interfacial interactions, the surface properties of Buckminsterfullerene (C60) and quartz s...

  15. Single-Molecule Interfacial Electron Transfer

    Energy Technology Data Exchange (ETDEWEB)

    Lu, H. Peter [Bowling Green State Univ., Bowling Green, OH (United States). Dept. of Chemistry and Center for Photochemical Sciences

    2017-11-28

    This project is focused on the use of single-molecule high spatial and temporal resolved techniques to study molecular dynamics in condensed phase and at interfaces, especially, the complex reaction dynamics associated with electron and energy transfer rate processes. The complexity and inhomogeneity of the interfacial ET dynamics often present a major challenge for a molecular level comprehension of the intrinsically complex systems, which calls for both higher spatial and temporal resolutions at ultimate single-molecule and single-particle sensitivities. Combined single-molecule spectroscopy and electrochemical atomic force microscopy approaches are unique for heterogeneous and complex interfacial electron transfer systems because the static and dynamic inhomogeneities can be identified and characterized by studying one molecule at a specific nanoscale surface site at a time. The goal of our project is to integrate and apply these spectroscopic imaging and topographic scanning techniques to measure the energy flow and electron flow between molecules and substrate surfaces as a function of surface site geometry and molecular structure. We have been primarily focusing on studying interfacial electron transfer under ambient condition and electrolyte solution involving both single crystal and colloidal TiO2 and related substrates. The resulting molecular level understanding of the fundamental interfacial electron transfer processes will be important for developing efficient light harvesting systems and broadly applicable to problems in fundamental chemistry and physics. We have made significant advancement on deciphering the underlying mechanism of the complex and inhomogeneous interfacial electron transfer dynamics in dyesensitized TiO2 nanoparticle systems that strongly involves with and regulated by molecule-surface interactions. We have studied interfacial electron transfer on TiO2 nanoparticle surfaces by using ultrafast single

  16. Characterisation and applications of microcapsules obtained by interfacial polycondensation.

    Science.gov (United States)

    Zhang, Yufen; Rochefort, Dominic

    2012-01-01

    This review highlights the materials, mechanisms and applications of microencapsulation by interfacial polycondensation in different areas. This technology entraps active ingredients inside microcapsules/microspheres, having an average diameter ranging from nanosize to several 100 µ. Polycondensation reactions take place at the boundary of two phases to form the shells of microcapsules or matrix microspheres. The emulsion can be classified into three types: water-in-oil, oil-in-water and oil-in-oil. According to the hydrophilic-lipophilic property of core phase, different active substances, such as proteins, enzymes, insecticides, herbicides, vitamins, catalysts, drugs, essential oils, dyes and phase change materials, have been successfully incorporated into different microcapsules/microspheres. Based on the shell-forming materials, this technology is capable of preparing polyamine, polyurea, polyurethane, polythiourea, polyester, polyepoxide, polyacrylamide and polysiloxane microcapsules. Over the past two decades, microcapsules prepared by interfacial polycondensation have been widely used in carbonless paper, cosmetics, pharmacy, agriculture, energy storage/transfer, thermal insulation/regulation and information and magnetic recording.

  17. Interfacial Polymerization on Dynamic Complex Colloids: Creating Stabilized Janus Droplets.

    Science.gov (United States)

    He, Yuan; Savagatrup, Suchol; Zarzar, Lauren D; Swager, Timothy M

    2017-03-01

    Complex emulsions, including Janus droplets, are becoming increasingly important in pharmaceuticals and medical diagnostics, the fabrication of microcapsules for drug delivery, chemical sensing, E-paper display technologies, and optics. Because fluid Janus droplets are often sensitive to external perturbation, such as unexpected changes in the concentration of the surfactants or surface-active biomolecules in the environment, stabilizing their morphology is critical for many real-world applications. To endow Janus droplets with resistance to external chemical perturbations, we demonstrate a general and robust method of creating polymeric hemispherical shells via interfacial free-radical polymerization on the Janus droplets. The polymeric hemispherical shells were characterized by optical and fluorescence microscopy, scanning electron microscopy, and confocal laser scanning microscopy. By comparing phase diagrams of a regular Janus droplet and a Janus droplet with the hemispherical shell, we show that the formation of the hemispherical shell nearly doubles the range of the Janus morphology and maintains the Janus morphology upon a certain degree of external perturbation (e.g., adding hydrocarbon-water or fluorocarbon-water surfactants). We attribute the increased stability of the Janus droplets to (1) the surfactant nature of polymeric shell formed and (2) increase in interfacial tension between hydrocarbon and fluorocarbon due to polymer shell formation. This finding opens the door of utilizing these stabilized Janus droplets in a demanding environment.

  18. Relative viscosity of emulsions in simple shear flow: Temperature, shear rate, and interfacial tension dependence

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Se Bin; Lee, Joon Sang [Dept. of Mechanical Engineering, Yonsei Unversity, Seoul (Korea, Republic of)

    2015-08-15

    We simulate an emulsion system under simple shear rates to analyze its rheological characteristics using the lattice Boltzmann method (LBM). We calculate the relative viscosity of an emulsion under a simple shear flow along with changes in temperature, shear rate, and surfactant concentration. The relative viscosity of emulsions decreased with an increase in temperature. We observed the shear-thinning phenomena, which is responsible for the inverse proportion between the shear rate and viscosity. An increase in the interfacial tension caused a decrease in the relative viscosity of the decane-in-water emulsion because the increased deformation caused by the decreased interfacial tension significantly influenced the wall shear stress.

  19. Exploitation et obligation de travailler

    Directory of Open Access Journals (Sweden)

    Pierre-Étienne Vandamme

    2014-06-01

    Full Text Available Cet article défend une définition de l’exploitation, restreinte aux relations de travail, en tentant d’une part d’expliciter une certaine compréhension de sens commun du concept (rémunération inéquitable en fonction du travail presté, et d’autre part d’échapper aux difficultés qui ont affecté la définition marxiste traditionnelle de l’exploitation comme extorsion de la plus-value (dans ses diverses variantes. Il explore ainsi le lien entre l’exploitation et l’obligation matérielle de travailler pour subvenir à ses besoins fondamentaux. Après avoir mis en garde contre les politiques d’activation des chômeurs, il conclut que l’exploitation est un phénomène contre lequel on peut lutter à l’aide de mécanismes relativement simples, même dans les sociétés capitalistes. Il rappelle toutefois que cela ne suffit pas à réaliser la justice sociale, resituant l’exploitation parmi d’autres enjeux fondamentaux pour une philosophie politique égalitariste

  20. Electrochemically modulated liquid chromatography: Theoretical investigations and applications from the perspectives of chromatography and interfacial electrochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Keller, David W. [Iowa State Univ., Ames, IA (United States)

    2005-01-01

    Electrochemically modulated liquid chromatography (EMLC) employs a conductive material as both a stationary phase for chromatographic separations and as a working electrode for performing electrochemistry experiments. This dual functionality gives EMLC the capacity to manipulate chromatographic separations by changing the potential applied (Eapp) to the stationary phase with respect to an external reference. The ability to monitor retention as a function of Eapp provides a means to chromatographically monitor electrosorption processes at solid-liquid interfaces. In this dissertation, the retention mechanism for EMLC is examined from the perspective of electrical double layer theory and interfacial thermodynamics. From the chromatographic data, it is possible to determine the interfacial excess (Λ) of a solute and changes in interfacial tension (dγ) as a function of both Eapp and the supporting electrolyte concentration. Taken together, these two experimentally manipulated parameters can be examined within the context of the Gibbs adsorption equation to delineate the contribution of a variety of interfacial properties, including the charge of solute on the stationary phase and the potential of zero charge (PZC), to the mechanism behind EMLC-based retention. The chromatographic probing of interfacial phenomena is complemented by electroanalytical experiments that exploit the ability to monitor the electronic current flowing through an EMLC column. Cyclic voltammetry and chronoamperometry of an EMLC column are used to determine the electronic performance characteristics of an EMLC column. An electrochemical flow injection analysis of a column is provided in which the current required to maintain a constant Eapp is monitored and provides a way to examine the influence that acetonitrile and supporting electrolyte composition, flow rate, column backpressure, and ionic strength have on the structure of electrified interfaces.

  1. On-chip microfluidic generation of monodisperse bubbles for liquid interfacial tension measurement.

    Science.gov (United States)

    Wang, Chen; Cao, Jing; Zhou, Yue; Xia, Xing-Hua

    2018-01-01

    A novel microfluidic method for measuring liquid interfacial tension using monodisperse microbubbles generated in situ has been proposed. Instead of bulky gas supply used in traditional microfluidic devices, microbubbles are efficiently generated via water electrolysis in the devices. Since the bubble formation frequency is related to the interfacial tension of liquids used, thus, precisely measuring the interfacial tension of liquids in microfluidics can be achieved. In addition, it is found that during the microbubble formation, the electrochemical potential fluctuates regularly at controlled electrolysis current, and the fluctuating period depends on the microbubble generation rate. Therefore, the change in electrochemical potential can be directly used to monitor the bubble formation process, which avoids the use of an external optical detection system. As demonstration, the interfacial tension of isopentanol solutions with different concentrations was measured, and the results show good agreement with the ones obtained using the maximum bubble pressure method, confirming the accuracy of the present method. The proposed strategy offers a simple, low cost and accurate solution to measure the liquid interfacial tension confined in microfluidic channels. The present platform is easily constructed and facilely manipulated in common laboratories, which is expected to be widely used in microfluidic-based research and application fields. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. What Controls Thermo-osmosis? Molecular Simulations Show the Critical Role of Interfacial Hydrodynamics

    Science.gov (United States)

    Fu, Li; Merabia, Samy; Joly, Laurent

    2017-11-01

    Thermo-osmotic and related thermophoretic phenomena can be found in many situations from biology to colloid science, but the underlying molecular mechanisms remain largely unexplored. Using molecular dynamics simulations, we measure the thermo-osmosis coefficient by both mechanocaloric and thermo-osmotic routes, for different solid-liquid interfacial energies. The simulations reveal, in particular, the crucial role of nanoscale interfacial hydrodynamics. For nonwetting surfaces, thermo-osmotic transport is largely amplified by hydrodynamic slip at the interface. For wetting surfaces, the position of the hydrodynamic shear plane plays a key role in determining the amplitude and sign of the thermo-osmosis coefficient. Finally, we measure a giant thermo-osmotic response of the water-graphene interface, which we relate to the very low interfacial friction displayed by this system. These results open new perspectives for the design of efficient functional interfaces for, e.g., waste-heat harvesting.

  3. The Constrained Vapor Bubble Experiment - Interfacial Flow Region

    Science.gov (United States)

    Kundan, Akshay; Wayner, Peter C., Jr.; Plawsky, Joel L.

    2015-01-01

    Internal heat transfer coefficient of the CVB correlated to the presence of the interfacial flow region. Competition between capillary and Marangoni flow caused Flooding and not a Dry-out region. Interfacial flow region growth is arrested at higher power inputs. 1D heat model confirms the presence of interfacial flow region. 1D heat model confirms the arresting phenomena of interfacial flow region Visual observations are essential to understanding.

  4. Surface and interfacial tension measurement, theory, and applications

    CERN Document Server

    Hartland, Stanley

    2004-01-01

    This edited volume offers complete coverage of the latest theoretical, experimental, and computer-based data as summarized by leading international researchers. It promotes full understanding of the physical phenomena and mechanisms at work in surface and interfacial tensions and gradients, their direct impact on interface shape and movement, and their significance to numerous applications. Assessing methods for the accurate measurement of surface tension, interfacial tension, and contact angles, Surface and Interfacial Tension presents modern simulations of complex interfacial motions, such a

  5. Gelation and interfacial behaviour of vegetable proteins

    NARCIS (Netherlands)

    Vliet, van T.; Martin, A.H.; Bos, M.A.

    2002-01-01

    Recent studies on gelation and interfacial properties of vegetable proteins are reviewed. Attention is focused on legume proteins, mainly soy proteins, and on wheat proteins. The rheological properties of vegetable protein gels as a function of heating time or temperature is discussed as well as the

  6. Interfacial properties of green leaf cellulosic particles

    NARCIS (Netherlands)

    Tamayo Tenorio, A.; Gieteling, J.; Nikiforidis, C.V.; Boom, R.M.; Goot, van der A.J.

    2017-01-01

    Cellulosic pulp from sugar beet leaves was fractionated and assessed on its interfacial properties. After pressing leaves to express the juice, the press cake was washed at alkaline pH (pH 9) to remove residual protein, dried, milled and air classified. The obtained cellulosic particles mainly

  7. Influence of interfacial layer on contact resistance

    NARCIS (Netherlands)

    Roy, D.; In 't Zand, M.A.A.; Delhounge, R.; Klootwijk, J.H.; Wolters, Robertus A.M.

    2008-01-01

    The contact resistance between two materials is dependent on the intrinsic properties of the materials in contact and the presence and properties of an interfacial layer at the contact. This article presents the difference in contact resistance measurements with and without the presence of a process

  8. Gelation and interfacial behaviour of vegetable proteins

    NARCIS (Netherlands)

    Vliet, T. van; Martin, A.H.; Bos, M.A.

    2002-01-01

    Recent studies on gelation and interfacial properties of vegetable protiens are reviewed. Attention is focused on legume proteins, mainly soy proteins, and on wheat proteins. The rheological properteis of vegetable protein gels as a function of heating time or temperature is discussed as well as the

  9. Current trends in interfacial polymerization chemistry

    NARCIS (Netherlands)

    Raaijmakers, Michiel; Benes, Nieck Edwin

    2016-01-01

    Interfacial polymerization is an enabling technique for the large-scale production of ultrathin layers, hollow nanospheres and nanofibers. The availability of a wide range of suitable monomer reactants allows for the synthesis of an impressive collection of polymers, including polyamides,

  10. Modeling interfacial dynamics using nonequilibrium thermodynamics frameworks

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2013-01-01

    In recent years several nonequilibrium thermodynamic frameworks have been developed capable of describing the dynamics of multiphase systems with complex microstructured interfaces. In this paper we present an overview of these frameworks. We will discuss interfacial dynamics in the context of the

  11. Thermodynamic and molecular origin of interfacial rate enhancements and endo-selectivities of a Diels-Alder reaction.

    Science.gov (United States)

    Beniwal, Vijay; Kumar, Anil

    2017-02-08

    Organic reactions in general display large rate accelerations when performed under interfacial conditions, such as on water or at ionic liquid interfaces. However, a clear picture of the physicochemical factors responsible for this large rate enhancements is not available. To gain an understanding of the thermodynamic and molecular origin of these large rate enhancements, we performed a Diels-Alder reaction between cyclopentadiene and methyl acrylate at ionic liquid/n-hexane interfaces. This study describes, for the first time, a methodology for the calculation of the activation parameters of an interfacial reaction. It has been seen that the energy of activation for an interfacial reaction is much smaller than that of the corresponding homogeneous reaction, resulting into the large rate acceleration for the interfacial reaction. Furthermore, the study describes the effects of the alkyl chain length of ionic liquid cations, the extent of heterogeneity, and the polarity of ionic liquids on the rate constants and stereoselectivity of the reaction.

  12. Modeling micelle formation and interfacial properties with iSAFT classical density functional theory

    Science.gov (United States)

    Wang, Le; Haghmoradi, Amin; Liu, Jinlu; Xi, Shun; Hirasaki, George J.; Miller, Clarence A.; Chapman, Walter G.

    2017-03-01

    Surfactants reduce the interfacial tension between phases, making them an important additive in a number of industrial and commercial applications from enhanced oil recovery to personal care products (e.g., shampoo and detergents). To help obtain a better understanding of the dependence of surfactant properties on molecular structure, a classical density functional theory, also known as interfacial statistical associating fluid theory, has been applied to study the effects of surfactant architecture on micelle formation and interfacial properties for model nonionic surfactant/water/oil systems. In this approach, hydrogen bonding is explicitly included. To minimize the free energy, the system minimizes interactions between hydrophobic components and hydrophilic components with water molecules hydrating the surfactant head group. The theory predicts micellar structure, effects of surfactant architecture on critical micelle concentration, aggregation number, and interfacial tension isotherm of surfactant/water systems in qualitative agreement with experimental data. Furthermore, this model is applied to study swollen micelles and reverse swollen micelles that are necessary to understand the formation of a middle-phase microemulsion.

  13. Phase behavior and interfacial tension studies of surfactant systems

    Energy Technology Data Exchange (ETDEWEB)

    Franses, E.I.

    1979-01-01

    Parallel studies of isomerically pure sodium P(1-heptylnonyl) benzene sulfoante, Texas No. 1, its mixture with sodium dodecyl sulfate (SDS), and the petroleum sulfonate TRS 10-80 were made. Phase behavior in water, in decane, and in water-decane mixtures was studied by spectroturbidimetry, polarizing light microscopy, ultracentrifugation, ultrafiltration, densitometry, conductimetry, low-frequency, 0.2 to 20 kHz, dielectric relaxation, isopiestic vapor pressure, and nuclear magnetic resonance spectroscopy. It was deduced that ultralow tensions (less than 0.01 dyn/cm) arise from the dispersed microcrystallites which form a third, usually liquid crystalline, phase at the decane-brine interfacial region. It appears that neither molecular adsorption from solution for micelles have anything to do with ultralow tensions, which appear to be sensitive to the third phase microstructure. The implications of these results for the mechanism of ultralow tensions in surfactant flooding processes for enhanced petroleum recovery are discussed.

  14. Hydrophobic Light-to-Heat Conversion Membranes with Self-Healing Ability for Interfacial Solar Heating.

    Science.gov (United States)

    Zhang, Lianbin; Tang, Bo; Wu, Jinbo; Li, Renyuan; Wang, Peng

    2015-09-02

    Self-healing hydrophobic light-to-heat conversion membranes for interfacial solar heating are fabricated by deposition of light-to-heat conversion material of polypyrrole onto a porous stainless-steel mesh, followed by hydrophobic fluoroalkylsilane modification. The mesh-based membranes spontaneously stay at the water-air interface, collect and convert solar light into heat, and locally heat only the water surface for enhanced evaporation. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Ordered mesoporous materials based on interfacial assembly and engineering.

    Science.gov (United States)

    Li, Wei; Yue, Qin; Deng, Yonghui; Zhao, Dongyuan

    2013-10-04

    Ordered mesoporous materials have inspired prominent research interest due to their unique properties and functionalities and potential applications in adsorption, separation, catalysis, sensors, drug delivery, energy conversion and storage, and so on. Thanks to continuous efforts over the past two decades, great achievements have been made in the synthesis and structural characterization of mesoporous materials. In this review, we summarize recent progresses in preparing ordered mesoporous materials from the viewpoint of interfacial assembly and engineering. Five interfacial assembly and synthesis are comprehensively highlighted, including liquid-solid interfacial assembly, gas-liquid interfacial assembly, liquid-liquid interfacial assembly, gas-solid interfacial synthesis, and solid-solid interfacial synthesis, basics about their synthesis pathways, princples and interface engineering strategies. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. X-ray reflectivity and interfacial tension study of the structure and phase behavior of the interface between water and mixed surfactant solutions of CH3(CH2)19OH and CF3(CF2)7(CH2)2OH in hexane.

    Science.gov (United States)

    Pingali, Sai Venkatesh; Takiue, Takanori; Luo, Guangming; Tikhonov, Aleksey M; Ikeda, Norihiro; Aratono, Makoto; Schlossman, Mark L

    2005-01-27

    The interface between water and mixed surfactant solutions of CH(3)(CH(2))(19)OH and CF(3)(CF(2))(7)(CH(2))(2)OH in hexane was studied with interfacial tension and X-ray reflectivity measurements. Measurements of the tension as a function of temperature for a range of total bulk surfactant concentrations and for three different values of the molal ratio of fluorinated to total surfactant concentration (0.25, 0.28, and 0.5) determined that the interface can be in three different monolayer phases. The interfacial excess entropy determined for these phases suggests that two of the phases are condensed single surfactant monolayers of CH(3)(CH(2))(19)OH and CF(3)(CF(2))(7)(CH(2))(2)OH. By studying four different compositions as a function of temperature, X-ray reflectivity was used to determine the structure of these monolayers in all three phases at the liquid-liquid interface. The X-ray reflectivity measurements were analyzed with a layer model to determine the electron density and thickness of the headgroup and tailgroup layers. The reflectivity demonstrates that phases 1 and 2 correspond to an interface fully covered by only one of the surfactants (liquid monolayer of CH(3)(CH(2))(19)OH in phase 1 and a solid condensed monolayer of CF(3)(CF(2))(7)(CH(2))(2)OH in phase 2). This was determined by analysis of the electron density profile as well as by direct comparison to reflectivity studies of the liquid-liquid interface in systems containing only one of the surfactants (plus hexane and water). The liquid monolayer of CH(3)(CH(2))(19)OH undergoes a transition to the solid monolayer of CF(3)(CF(2))(7)(CH(2))(2)OH with increasing temperature. Phase 3 and the transition regions between phases 1 and 2 consist of a mixed monolayer at the interface that contains domains of the two surfactants. In phase 3 the interface also contains gaseous regions that occupy progressively more of the interface as the temperature is increased. The reflectivity determined the coverage of

  17. X-ray Studies of Interfacial Strontium–Extractant Complexes in a Model Solvent Extraction System

    Energy Technology Data Exchange (ETDEWEB)

    Bu, Wei; Mihaylov, Miroslav; Amoanu, Daniel; Lin, Binhua; Meron, Mati; Kuzmenko, Ivan; Soderholm, L.; Schlossman, Mark L.

    2014-10-30

    The interfacial behavior of a model solvent extraction liquidliquid system, consisting of solutions of dihexadecyl phosphate (DHDP) in dodecane and SrCl2 in water, was studied to determine the structure of the interfacial ionextractant complex and its variation with pH. Previous experiments on a similar extraction system with ErCl3 demonstrated that the kinetics of the extraction process could be greatly retarded by cooling through an adsorption transition, thus providing a method to immobilize ionextractant complexes at the interface and further characterize them with X-ray interface-sensitive techniques. Here, we use this same method to study the SrCl2 system. X-ray reflectivity and fluorescence near total reflection measured the molecular-scale interfacial structure above and below the adsorption transition for a range of pH. Below the transition, DHDP molecules form a homogeneous monolayer at the interface with Sr2+ coverage increasing from zero to saturation (one Sr2+ per two DHDP) within a narrow range of pH. Experimental values of Sr2+ interfacial density determined from fluorescence measurements are larger than those from reflectivity measurements. Although both techniques probe Sr2+ bound to DHDP, only the fluorescence provides adequate sensitivity to Sr2+ in the diffuse double layer. A Stern equation determines the Sr2+ binding constant from the reflectivity measurements and the additional Sr2+ measured in the diffuse double layer is accounted for by GouyChapman theory. Above the transition temperature, a dilute concentration of DHDPSr complexes resides at the interface, even for temperatures far above the transition. A comparison is made of the structure of the interfacial ionextractant complex for this divalent metal ion to recent results on trivalent Er3+ metal ions, which provides insight into the role of metal ion charge on the structure of interfacial ionextractant complexes, as well as implications for extraction of these two differently charged

  18. Teotihuacan, tepeapulco, and obsidian exploitation.

    Science.gov (United States)

    Charlton, T H

    1978-06-16

    Current cultural ecological models of the development of civilization in central Mexico emphasize the role of subsistence production techniques and organization. The recent use of established and productive archeological surface survey techniques along natural corridors of communication between favorable niches for cultural development within the Central Mexican symbiotic region resulted in the location of sites that indicate an early development of a decentralized resource exploitation, manufacturing, and exchange network. The association of the development of this system with Teotihuacán indicates the importance such nonsubsistence production and exchange had in the evolution of this first central Mexican civilization. The later expansion of Teotihuacán into more distant areas of Mesoamerica was based on this resource exploitation model. Later civilizations centered at Tula and Tenochtitlán also used such a model in their expansion.

  19. Dark matters: exploitation as cooperation.

    Science.gov (United States)

    Dasgupta, Partha

    2012-04-21

    The empirical literature on human cooperation contains studies of communitarian institutions that govern the provision of public goods and management of common property resources in poor countries. Scholars studying those institutions have frequently used the Prisoners' Dilemma game as their theoretical tool-kit. But neither the provision of local public goods nor the management of local common property resources involves the Prisoners' Dilemma. That has implications for our reading of communitarian institutions. By applying a fundamental result in the theory of repeated games to a model of local common property resources, it is shown that communitarian institutions can harbour exploitation of fellow members, something that would not be possible in societies where cooperation amounts to overcoming the Prisoners' Dilemma. The conclusion we should draw is that exploitation can masquerade as cooperation. Copyright © 2011 Elsevier Ltd. All rights reserved.

  20. Network exploitation using WAMI tracks

    Science.gov (United States)

    Rimey, Ray; Record, Jim; Keefe, Dan; Kennedy, Levi; Cramer, Chris

    2011-06-01

    Creating and exploiting network models from wide area motion imagery (WAMI) is an important task for intelligence analysis. Tracks of entities observed moving in the WAMI sensor data are extracted, then large numbers of tracks are studied over long time intervals to determine specific locations that are visited (e.g., buildings in an urban environment), what locations are related to other locations, and the function of each location. This paper describes several parts of the network detection/exploitation problem, and summarizes a solution technique for each: (a) Detecting nodes; (b) Detecting links between known nodes; (c) Node attributes to characterize a node; (d) Link attributes to characterize each link; (e) Link structure inferred from node attributes and vice versa; and (f) Decomposing a detected network into smaller networks. Experimental results are presented for each solution technique, and those are used to discuss issues for each problem part and its solution technique.

  1. Interfacial Fluid Mechanics A Mathematical Modeling Approach

    CERN Document Server

    Ajaev, Vladimir S

    2012-01-01

    Interfacial Fluid Mechanics: A Mathematical Modeling Approach provides an introduction to mathematical models of viscous flow used in rapidly developing fields of microfluidics and microscale heat transfer. The basic physical effects are first introduced in the context of simple configurations and their relative importance in typical microscale applications is discussed. Then,several configurations of importance to microfluidics, most notably thin films/droplets on substrates and confined bubbles, are discussed in detail.  Topics from current research on electrokinetic phenomena, liquid flow near structured solid surfaces, evaporation/condensation, and surfactant phenomena are discussed in the later chapters. This book also:  Discusses mathematical models in the context of actual applications such as electrowetting Includes unique material on fluid flow near structured surfaces and phase change phenomena Shows readers how to solve modeling problems related to microscale multiphase flows Interfacial Fluid Me...

  2. Facile Interfacial Electron Transfer of Hemoglobin

    Directory of Open Access Journals (Sweden)

    Chunhai Fan

    2005-12-01

    Full Text Available Abstract: We herein describe a method of depositing hemoglobin (Hb and sulfonated polyaniline (SPAN on GC electrodes that facilitate interfacial protein electron transfer. Well-defined, reproducible, chemically reversible peaks of Hb and SPAN can be obtained in our experiments. We also observed enhanced peroxidase activity of Hb in SPAN films. These results clearly showed that SPAN worked as molecular wires and effectively exchanged electrons between Hb and electrodes.Mediated by Conjugated Polymers

  3. Kinetics of Model Reactions for Interfacial Polymerization

    Directory of Open Access Journals (Sweden)

    Henry Hall

    2012-02-01

    Full Text Available To model the rates of interfacial polycondensations, the rates of reaction of benzoyl chloride and methyl chloroformate with various aliphatic monoamines in acetonitrile were determined at 25 °C. Buffering with picric acid slowed these extremely fast reactions so the rate constants could be determined from the rate of disappearance of picrate ion. The rates of the amine reactions correlated linearly with their Swain-Scott nucleophilicities.

  4. Kinetics of Model Reactions for Interfacial Polymerization

    OpenAIRE

    Henry Hall; Robert Bates (Harvard University); Jeffrey Robertson; Anne Padias; Trevor Centeno-Hall

    2012-01-01

    To model the rates of interfacial polycondensations, the rates of reaction of benzoyl chloride and methyl chloroformate with various aliphatic monoamines in acetonitrile were determined at 25 °C. Buffering with picric acid slowed these extremely fast reactions so the rate constants could be determined from the rate of disappearance of picrate ion. The rates of the amine reactions correlated linearly with their Swain-Scott nucleophilicities.

  5. Microstructural Evolution Based on Fundamental Interfacial Properties

    Energy Technology Data Exchange (ETDEWEB)

    A. D. Rollett; D. J. Srolovitz; A. Karma

    2003-07-11

    This first CMSN project has been operating since the summer of 1999. The main achievement of the project was to bring together a community of materials scientists, physicists and mathematicians who share a common interest in the properties of interfaces and the impact of those properties on microstructural evolution. Six full workshops were held at Carnegie Mellon (CMU), Northwestern (NWU), Santa Fe, Northeastern University (NEU), National Institute for Standards and Technology (NIST), Ames Laboratory, and at the University of California in San Diego (UCSD) respectively. Substantial scientific results were obtained through the sustained contact between the members of the project. A recent issue of Interface Science (volume 10, issue 2/3, July 2002) was dedicated to the output of the project. The results include: the development of methods for extracting anisotropic boundary energy and mobility from molecular dynamics simulations of solid/liquid interfaces in nickel; the extraction of anisotropic energies and mobilities in aluminum from similar MD simulations; the application of parallel computation to the calculation of interfacial properties; the development of a method to extract interfacial properties from the fluctuations in interface position through consideration of interfacial stiffness; the use of anisotropic interface properties in studies of abnormal grain growth; the discovery of abnormal grain growth from random distributions of orientation in subgrain networks; the direct comparison at the scale of individual grains between experimentally observed grain growth and simulations, which confirmed the importance of including anisotropic interfacial properties in the simulations; the classification of a rich variety of dendritic morphologies based on slight variations in the anisotropy of the solid-liquid interface; development of phase field methods that permit both solidification and grain growth to be simulated within the same framework.

  6. Facile Interfacial Electron Transfer of Hemoglobin

    OpenAIRE

    Chunhai Fan; Shiping Song; Haiping Wu; Lihua Wang; Xiaofang Hu; Runguang Sun; Bo Zhou

    2005-01-01

    Abstract: We herein describe a method of depositing hemoglobin (Hb) and sulfonated polyaniline (SPAN) on GC electrodes that facilitate interfacial protein electron transfer. Well-defined, reproducible, chemically reversible peaks of Hb and SPAN can be obtained in our experiments. We also observed enhanced peroxidase activity of Hb in SPAN films. These results clearly showed that SPAN worked as molecular wires and effectively exchanged electrons between Hb and electrodes.Mediated by Conjugated...

  7. Interfacial Functionalization and Engineering of Nanoparticles

    OpenAIRE

    Song, Yang

    2014-01-01

    The intense research interest in nanoscience and nanotechnology is largely fueled by the unique properties of nanoscale materials. In this dissertation, the research efforts are focused on surface functionalization and interfacial engineering of functional nanoparticles in the preparation of patchy nanoparticles (e.g., Janus nanoparticles and Neapolitan nanoparticles) such that the nanoparticle structures and properties may be manipulated to an unprecedented level of sophistication.Experiment...

  8. Moisture effect on interfacial integrity of epoxy-bonded system: a hierarchical approach

    Science.gov (United States)

    Tam, Lik-ho; Lun Chow, Cheuk; Lau, Denvid

    2018-01-01

    The epoxy-bonded system has been widely used in various applications across different scale lengths. Prior investigations have indicated that the moisture-affected interfacial debonding is the major failure mode of such a system, but the fundamental mechanism remains unknown, such as the basis for the invasion of water molecules in the cross-linked epoxy and the epoxy-bonded interface. This prevents us from predicting the long-term performance of the epoxy-related applications under the effect of the moisture. Here, we use full atomistic models to investigate the response of the epoxy-bonded system towards the adhesion test, and provide a detailed analysis of the interfacial integrity under the moisture effect and the associated debonding mechanism. Molecular dynamics simulations show that water molecules affect the hierarchical structure of the epoxy-bonded system at the nanoscale by disrupting the film-substrate interaction and the molecular interaction within the epoxy, which leads to the detachment of the epoxy thin film, and the final interfacial debonding. The simulation results show good agreement with the experimental results of the epoxy-bonded system. Through identifying the relationship between the epoxy structure and the debonding mechanism at multiple scales, it is shown that the hierarchical structure of the epoxy-bonded system is crucial for the interfacial integrity. In particular, the available space of the epoxy-bonded system, which consists of various sizes ranging from the atomistic scale to the macroscale and is close to the interface facilitates the moisture accumulation, leading to a distinct interfacial debonding when compared to the dry scenario.

  9. Instability due to interfacial tension in parallel liquid-liquid flow

    Science.gov (United States)

    Rodriguez, Oscar M. H.

    2016-06-01

    The frequent occurrence of multiphase flows in pipes has motivated a great research interest over the last decades. The particular case of liquid-liquid flow is commonly encountered in the petroleum industry, where a number of applications involve oil-water flow such as crude oil production in directional wells. However, it has not received the same attention when compared to gas-liquid flow. In addition, most of the available information has to do with flow in pipes. When it comes to flows in annular ducts the data are scanty. A general transition criterion has been recently proposed in order to obtain the stratified and core-annular flow-pattern transition boundaries in viscous oil-water flow. The proposed criterion was based on an one-dimensional two-fluid model of liquid-liquid two-phase flow. A stability analysis was carried out and interfacial tension is considered. A new destabilizing term arises, which is a function of the cross-section curvature of the interface. It is well accepted that interfacial tension favors the stable condition. However, the analysis of the new interfacial-tension term shows that it can actually destabilize the basic flow pattern, playing an important role in regions of extreme volumetric fractions. Such an interesting effect seems to be more pronounced in flows of viscous fluids and in annular-duct flow. The effect of interfacial tension is explored and the advantages of using a more complete model are discussed and illustrated through comparisons with experimental data from the literature. The evaluation of the effects of fluid viscosity and interfacial tension allows the correction and enhancement of transition models based essentially on data of pipe flow of low viscosity fluids.

  10. Scaling of interfacial jump conditions; Escalamiento de condiciones de salto interfacial

    Energy Technology Data Exchange (ETDEWEB)

    Quezada G, S.; Vazquez R, A.; Espinosa P, G., E-mail: sequga@gmail.com [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Area de Ingenieria en Recursos Energeticos, Apdo. Postal 55-535, 09340 Ciudad de Mexico (Mexico)

    2015-09-15

    To model the behavior of a nuclear reactor accurately is needed to have balance models that take into account the different phenomena occurring in the reactor. These balances have to be coupled together through boundary conditions. The boundary conditions have been studied and different treatments have been given to the interface. In this paper is a brief description of some of the interfacial jump conditions that have been proposed in recent years. Also, the scaling of an interfacial jump condition is proposed, for coupling the different materials that are in contact within a nuclear reactor. (Author)

  11. Spherical monovalent ions at aqueous liquid-vapor interfaces: interfacial stability and induced interface fluctuations.

    Science.gov (United States)

    Ou, Shuching; Hu, Yuan; Patel, Sandeep; Wan, Hongbin

    2013-10-03

    Ion-specific interfacial behaviors of monovalent halides impact processes such as protein denaturation, interfacial stability, and surface tension modulation, and as such, their molecular and thermodynamic underpinnings garner much attention. We use molecular dynamics simulations of monovalent anions in water to explore effects on distant interfaces. We observe long-ranged ion-induced perturbations of the aqueous environment, as suggested by experiment and theory. Surface stable ions, characterized as such by minima in potentials of mean force computed using umbrella sampling MD simulations, induce larger interfacial fluctuations compared to nonsurface active species, conferring more entropy approaching the interface. Smaller anions and cations show no interfacial potential of mean force minima. The difference is traced to hydration shell properties of the anions, and the coupling of these shells with distant solvent. The effects correlate with the positions of the anions in the Hofmeister series (acknowledging variations in force field ability to recapitulate essential underlying physics), suggesting how differences in induced, nonlocal perturbations of interfaces may be related to different specific-ion effects in dilute biophysical and nanomaterial systems.

  12. Protocol to Exploit Waiting Resources for UASNs

    Directory of Open Access Journals (Sweden)

    Li-Ling Hung

    2016-03-01

    Full Text Available The transmission speed of acoustic waves in water is much slower than that of radio waves in terrestrial wireless sensor networks. Thus, the propagation delay in underwater acoustic sensor networks (UASN is much greater. Longer propagation delay leads to complicated communication and collision problems. To solve collision problems, some studies have proposed waiting mechanisms; however, long waiting mechanisms result in low bandwidth utilization. To improve throughput, this study proposes a slotted medium access control protocol to enhance bandwidth utilization in UASNs. The proposed mechanism increases communication by exploiting temporal and spatial resources that are typically idle in order to protect communication against interference. By reducing wait time, network performance and energy consumption can be improved. A performance evaluation demonstrates that when the data packets are large or sensor deployment is dense, the energy consumption of proposed protocol is less than that of existing protocols as well as the throughput is higher than that of existing protocols.

  13. Exploitation of bioremediation in the environment protection

    Directory of Open Access Journals (Sweden)

    Alena Luptáková

    2005-11-01

    Full Text Available Soils and waters contaminated with toxic metals pose a major environmental problem that needs an effective and affordable technological solution. Many areas remain contaminated with no remediation in sight because it is too expensive to clean them up with available technologies. Bioremediation may provide an economically viable solution for remediation of some of these sites. The bioremediation is an application of the biological treatment to the cleanup of hazardous chemicals and is an example of the environmental biotechnology. The aim of this paper is to give a theoretical and practical view concerning the possibility of the bioremediation exploitation in the environment protection. This paper includes some results of the bioremediation of the acid mine drainage by sulphate-reducing bacteria.

  14. Exploring, exploiting and evolving diversity of aquatic ecosystem models

    NARCIS (Netherlands)

    Janssen, A.B.G.; Arhonditsis, G.B.; Beusen, Arthur; Bolding, Karsten; Bruce, Louise; Bruggeman, Jorn; Couture, Raoul Marie; Downing, Andrea S.; Alex Elliott, J.; Frassl, M.A.; Gal, Gideon; Gerla, Daan J.; Hipsey, M.R.; Hu, Fenjuan; Ives, S.C.; Janse, J.H.; Jeppesen, Erik; Jöhnk, K.D.; Kneis, David; Kong, Xiangzhen; Kuiper, J.J.; Lehmann, M.K.; Lemmen, Carsten; Özkundakci, Deniz; Petzoldt, Thomas; Rinke, Karsten; Robson, B.J.; Sachse, René; Schep, S.A.; Schmid, Martin; Scholten, Huub; Teurlincx, Sven; Trolle, Dennis; Troost, T.A.; Dam, Van A.A.; Gerven, Van L.P.A.; Weijerman, Mariska; Wells, S.A.; Mooij, W.M.

    2015-01-01

    Here, we present a community perspective on how to explore, exploit and evolve the diversity in aquatic ecosystem models. These models play an important role in understanding the functioning of aquatic ecosystems, filling in observation gaps and developing effective strategies for water quality

  15. Interfacial Stress Transfer in an Aramid Reinforced Thermoplastic Elastomer

    OpenAIRE

    Coffey, Austin

    2007-01-01

    Abstract The interfacial micromechanics of Twaron 2200 aramid fibers in an engineering thermoplastic elastomer (Pebax 7033, polyether amide block co-polymer) has been investigated by determining the distribution of interfacial shear stress along fibers in single-fiber model composites using Raman spectroscopy. The effects of various fiber surface treatments on the interfacial shear stress and fragmentation of the aramid fibers are discussed. The fiber average stress in...

  16. Comparisons of the Structure of Water at Neat Oil/Water and Air/Water Interfaces as Determined by Vibrational Sum Frequency Generation

    National Research Council Canada - National Science Library

    Gragson, D

    1997-01-01

    We have employed vibrational sum frequency generation (VSFG) to investigate the structure of water at neat oil/water and air/water interfaces through the OH stretching modes of the interfacial water molecules...

  17. Interfacial interaction between polypropylene and nanotube: A molecular dynamics simulation

    Science.gov (United States)

    Zhang, Danhui; Yang, Houbo; Liu, Zhongkui; Liu, Anmin; Li, Yunfang

    2017-09-01

    The interfacial interaction between polypropylene (PE) and single walled carbon nanotube (SWCNT) was studied using molecular dynamics (MD) simulations. The result showed that the PE chain could stabilize the SWCNT and then extended along the direction of SWCNT. The mechanism of interfacial interaction between PE and SWCNT was also discussed. Furthermore, the interfacial interaction between more PE and SWCNT was also investigated and the position also deeply influenced the interaction. This will be beneficial to understanding the interfacial interaction between polymer and CNT in solution, and also guiding the fabrication of high performance polymer/CNT nanocomposites.

  18. SEXUAL EXPLOITATION AND ABUSE BY UN PEACEKEEPERS ...

    African Journals Online (AJOL)

    Allaiac

    The sexual exploitation of children by peacekeepers is particularly insidious. Educational interventions and training initiatives to bring about behaviour change to address sexual exploitation and abuse .... its own peacekeeping personnel are engaging in acts of sexual exploitation and abuse, including such crimes as rape.

  19. The exploitation argument against commercial surrogacy.

    Science.gov (United States)

    Wilkinson, Stephen

    2003-04-01

    This paper discusses the exploitation argument against commercial surrogacy: the claim that commercial surrogacy is morally objectionable because it is exploitative. The following questions are addressed. First, what exactly does the exploitation argument amount to? Second, is commercial surrogacy in fact exploitative? Third, if it were exploitative, would this provide a sufficient reason to prohibit (or otherwise legislatively discourage) it? The focus throughout is on the exploitation of paid surrogates, although it is noted that other parties (e.g. 'commissioning parents') may also be the victims of exploitation. It is argued that there are good reasons for believing that commercial surrogacy is often exploitative. However, even if we accept this, the exploitation argument for prohibiting (or otherwise legislatively discouraging) commercial surrogacy remains quite weak. One reason for this is that prohibition may well 'backfire' and lead to potential surrogates having to do other things that are more exploitative and/or more harmful than paid surrogacy. It is concluded therefore that those who oppose exploitation should (rather than attempting to stop particular practices like commercial surrogacy) concentrate on: (a) improving the conditions under which paid surrogates 'work'; and (b) changing the background conditions (in particular, the unequal distribution of power and wealth) which generate exploitative relationships.

  20. Interfacial properties of semifluorinated alkane diblock copolymers

    Science.gov (United States)

    Pierce, Flint; Tsige, Mesfin; Borodin, Oleg; Perahia, Dvora; Grest, Gary S.

    2008-06-01

    The liquid-vapor interfacial properties of semifluorinated linear alkane diblock copolymers of the form F3C(CF2)n-1(CH2)m-1CH3 are studied by fully atomistic molecular dynamics simulations. The chemical composition and the conformation of the molecules at the interface are identified and correlated with the interfacial energies. A modified form of the Optimized Parameter for Liquid Simulation All-Atom (OPLS-AA) force field of Jorgensen and co-workers [J. Am. Chem. Soc. 106, 6638 (1984); 118, 11225 (1996); J. Phys. Chem. A 105, 4118 (2001)], which includes specific dihedral terms for H-F blocks-and corrections to the H-F nonbonded interaction, is used together with a new version of the exp-6 force field developed in this work. Both force fields yield good agreement with the available experimental liquid density and surface tension data as well as each other over significant temperature ranges and for a variety of chain lengths and compositions. The interfacial regions of semifluorinated alkanes are found to be rich in fluorinated groups compared to hydrogenated groups, an effect that decreases with increasing temperature but is independent of the fractional length of the fluorinated segments. The proliferation of fluorine at the surface substantially lowers the surface tension of the diblock copolymers, yielding values near those of perfluorinated alkanes and distinct from those of protonated alkanes of the same chain length. With decreasing temperatures within the liquid state, chains are found to preferentially align perpendicular to the interface, as previously seen.

  1. Interfacial properties of semiconducting transition metal chalcogenides

    Science.gov (United States)

    Jaegermann, W.; Tributsch, H.

    This review is aimed at the correlation of structural and electronic properies of semiconducting transition metal chalcogenides with molecular surface processes and mechanisms in photoelectrochemistry, (photo)catalysis, geochemistry and hydrometallurgy. Layer-type, pyrite structured and transition metal cluster containing chalcogenides are selected as model systems to explain the principles involved. Special emphasis is given to the discussion of materials which involve transition metal d- states in the interfacial reaction pathways of holes and electrons. Since they initiate and control heterogeneous coordination chemistry at the surfaces they may provide the possibility of tailoring selective and catalytically demanding reactions. Examples of such mechanisms are presented and discussed in relation to surface properties involved.

  2. Interfacial properties of bottle-brush polyelectrolytes

    DEFF Research Database (Denmark)

    Claesson, P. M.; Naderi, A.; Iruthayaraj, J.

    2007-01-01

    This article is focused on interfacial properties of bottle brush polyelectrolytes, where side-chains are attached along a polymer backbone. This class of polymer has been much less studied than block copolymers, which is particularly true for bottle brush polyelectrolytes with a high graft density...... whereas on silica both electrostatic forces and interactions between silica and ethylene oxide chains drive the adsorption. On silica the adsorbed amount is very sensitive to solution ionic strength and pH. We also report on surface interactions and frictional forces obtained between surfaces coated...

  3. Interfacial fluid dynamics and transport processes

    CERN Document Server

    Schwabe, Dietrich

    2003-01-01

    The present set of lectures and tutorial reviews deals with various topical aspects related to instabilities of interfacial processes and driven flows from both the theoretical and experimental point of views. New research has been spurred by the many demands for applications in material sciences (melting, solidification, electro deposition), biomedical engineering and processing in microgravity environments. This book is intended as both a modern source of reference for researchers in the field as well as an introduction to postgraduate students and non-specialists from related areas.

  4. Hydrophobic Light-to-Heat Conversion Membranes with Self-Healing Ability for Interfacial Solar Heating

    KAUST Repository

    Zhang, Lianbin

    2015-07-01

    Self-healing hydrophobic light-to-heat conversion membranes for interfacial solar heating are fabricated by deposition of light-to-heat conversion material of polypyrrole onto porous stainless steel mesh, followed by hydrophobic fluoroalkylsilane modification. The mesh-based membranes spontaneously stay at the water–air interface, collect and convert solar light into heat, and locally heat only the water surface for an enhanced evaporation.

  5. The Exploitation of Evolving Resources

    CERN Document Server

    McGlade, Jacqueline; Law, Richard

    1993-01-01

    The impact of man on the biosphere is profound. Quite apart from our capacity to destroy natural ecosystems and to drive species to extinction, we mould the evolution of the survivors by the selection pressures we apply to them. This has implications for the continued health of our natural biological resources and for the way in which we seek to optimise yield from those resources. Of these biological resources, fish stocks are particularly important to mankind as a source of protein. On a global basis, fish stocks provide the major source of protein for human consumption from natural ecosystems, amounting to some seventy million tonnes in 1970. Although fisheries management has been extensively developed over the last century, it has not hitherto considered the evolutionary consequences of fishing activity. While this omission may not have been serious in the past, the ever increasing intensity of exploitation and the deteriorating health of fish stocks has generated an urgent need for a better understanding...

  6. Numerical modeling of mineral dissolution - precipitation kinetics integrating interfacial processes

    Science.gov (United States)

    Azaroual, M. M.

    2016-12-01

    The mechanisms of mineral dissolution/precipitation are complex and interdependent. Within a same rock, the geochemical modelling may have to manage kinetic reactions with high ratios between the most reactive minerals (i.e., carbonates, sulfate salts, etc.) and less reactive minerals (i.e., silica, alumino-silicates, etc.). These ratios (higher than 10+6) induce numerical instabilities for calculating mass and energy transfers between minerals and aqueous phases at the appropriate scales of time and space. The current scientific debate includes: i) changes (or not) of the mineral reactive surface with the progress of the dissolution/precipitation reactions; ii) energy jumps (discontinuity) in the thermodynamic affinity function of some dissolution/precipitation reactions and iii) integration of processes at the "mineral - aqueous solution" interfaces for alumino-silicates, silica and carbonates. In recent works dealing with the specific case of amorphous silica, measurements were performed on nano-metric cross-sections indicating the presence of surface layer between the bulk solution and the mineral. This thin layer is composed by amorphous silica and hydrated silica "permeable" to the transfer of water and ionic chemical constituents. The boundary/interface between the initial mineral and the silica layer is characterized by a high concentration jump of chemical products at the nanoscale and some specific interfacial dissolution/precipitation processes.In this study, the results of numerical simulations dealing with different mechanisms of silicate and carbonate dissolution/precipitation reactions and integrating interfacial processes will be discussed. The application of this approach to silica precipitation is based on laboratory experiments and it highlights the significant role of the "titration" surface induced by surface complexation reactions in the determination of the kinetics of precipitation.

  7. ZnO-Au-SnO2 Z-scheme photoanodes for remarkable photoelectrochemical water splitting.

    Science.gov (United States)

    Li, Jing-Mei; Cheng, Hao-Yun; Chiu, Yi-Hsuan; Hsu, Yung-Jung

    2016-08-25

    For the first time a ZnO nanorod-based Z-scheme heterostructure system was proposed and realized for efficient photoelectrochemical water splitting. The samples were prepared by depositing a thin layer of SnO2 on the Au surface of Au particle-decorated ZnO nanorods. For ZnO-Au-SnO2 nanorods, the embedded Au can mediate interfacial charge transfer by promoting electron transfer from the conduction band of SnO2 to the valence band of ZnO. This vectorial charge transfer resulted in the situation that the photoexcited electrons accumulated at ZnO while the photogenerated holes concentrated at SnO2, giving ZnO-Au-SnO2 substantially high redox powers. Time-resolved photoluminescence spectra suggested that the interfacial charge transfer across the ZnO/Au/SnO2 interface was significantly improved as a result of the Z-scheme charge transfer mechanism. With the substantially high redox powers and significantly improved interfacial charge transfer, ZnO-Au-SnO2 nanorods performed much better as a photoanode in photoelectrochemical water splitting than pristine ZnO, plasmonic Au-decorated ZnO and type-II SnO2-coated ZnO nanorods did. The present study has provided a viable approach to exploit Z-scheme photoanodes in the design of efficient artificial photosynthesis systems for solar energy conversion.

  8. Interfacial Friction and Adhesion of Polymer Brushes

    KAUST Repository

    Landherr, Lucas J. T.

    2011-08-02

    A bead-probe lateral force microscopy (LFM) technique is used to characterize the interfacial friction and adhesion properties of polymer brushes. Our measurements attempt to relate the physical structure and chemical characteristics of the brush to their properties as thin-film, tethered lubricants. Brushes are synthesized at several chain lengths and surface coverages from polymer chains of polydimethylsiloxane (PDMS), polystyrene (PS), and a poly(propylene glycol)-poly(ethylene glycol) block copolymer (PPG/PEG). At high surface coverage, PDMS brushes manifest friction coefficients (COFs) that are among the lowest recorded for a dry lubricant film (μ ≈ 0.0024) and close to 1 order of magnitude lower than the COF of a bare silicon surface. Brushes synthesized from higher molar mass chains exhibit higher friction forces than those created using lower molar mass polymers. Increased grafting density of chains in the brush significantly reduces the COF by creating a uniform surface of stretched chains with a decreased surface viscosity. Brushes with lower surface tension and interfacial shear stresses manifest the lowest COF. In particular, PDMS chains exhibit COFs lower than PS by a factor of 3.7 and lower than PPG/PEG by a factor of 4.7. A scaling analysis conducted on the surface coverage (δ) in relation to the fraction (ε) of the friction force developing from adhesion predicts a universal relation ε ∼ δ4/3, which is supported by our experimental data. © 2011 American Chemical Society.

  9. Sex, Gore and Provocation: the Influence of Exploitation in John Waters’s Early Films

    OpenAIRE

    Pereira Nunes, Elise

    2016-01-01

    A self-taught filmmaker working with very low budgets, fascinated with Hollywood’s glamor as well as exploitation and underground cinema, John Waters has appropriated techniques and modes of production, distribution and promotion specific to exploitation from the beginning of his career in the late 1960s. The illicit, controversial topics addressed in his early movies, traditionally brought up by exploitation in order to attract audiences whose voyeuristic desires would not be fulfilled by Ho...

  10. Experimental Simulation of the Exploitation of Natural Gas Hydrate

    Directory of Open Access Journals (Sweden)

    Chang-Yu Sun

    2012-02-01

    Full Text Available Natural gas hydrates are cage-like crystalline compounds in which a large amount of methane is trapped within a crystal structure of water, forming solids at low temperature and high pressure. Natural gas hydrates are widely distributed in permafrost regions and offshore. It is estimated that the worldwide amounts of methane bound in gas hydrates are total twice the amount of carbon to be found in all known fossil fuels on earth. A proper understanding of the relevant exploitation technologies is then important for natural gas production applications. In this paper, the recent advances on the experimental simulation of natural gas hydrate exploitation using the major hydrate production technologies are summarized. In addition, the current situation of the industrial exploitation of natural gas hydrate is introduced, which are expected to be useful for establishing more safe and efficient gas production technologies.

  11. Interfacial adhesion of laser clad functionally graded materials

    NARCIS (Netherlands)

    Pei, Y. T.; Ocelik, V.; De Hosson, J. T. M.

    2003-01-01

    Specially designed samples of laser clad AlSi40 functionally graded materials (FGM) are made for evaluating the interfacial adhesion. To obtain the interfacial bond strength notches are made right at the interface of the FGMs. In-situ microstructural observations during straining in a field-emission

  12. Manipulation of interfacial instabilities by using a soft, deformable ...

    Indian Academy of Sciences (India)

    Abstract. Multilayer flows are oftensusceptible to interfacial instabilities caused due to jump in viscosity/elasticity across thefluid–fluid interface. It is frequently required to manipulate and control these interfacial instabilities in various applications such as coating processes or polymer coextrusion. We demonstrate here the ...

  13. Interfacial re-arrangement in initial microbial adhesion to surfaces

    NARCIS (Netherlands)

    Busscher, H.J.; Norde, W.; Sharma, P.K.; Mei, van der H.C.

    2010-01-01

    Upon initial microbial adhesion to a surface multiple events occur that include interfacial re-arrangements in the region between an adhering organism and a surface Application of physico-chemical mechanisms to explain microbial adhesion to surfaces requires better knowledge of the interfacial re

  14. Extraction of temperature dependent interfacial resistance of thermoelectric modules

    DEFF Research Database (Denmark)

    Chen, Min

    2011-01-01

    This article discusses an approach for extracting the temperature dependency of the electrical interfacial resistance associated with thermoelectric devices. The method combines a traditional module-level test rig and a nonlinear numerical model of thermoelectricity to minimize measurement errors...... on the interfacial resistance. The extracted results represent useful data to investigating the characteristics of thermoelectric module resistance and comparing performance of various modules....

  15. Manipulation of interfacial instabilities by using a soft, deformable ...

    Indian Academy of Sciences (India)

    Multilayer flows are oftensusceptible to interfacial instabilities caused due to jump in viscosity/elasticity across thefluid–fluid interface. It is frequently required to manipulate and control these interfacial instabilities in various applications such as coating processes or polymer coextrusion. We demonstrate here the possibility ...

  16. Formation of Metastable Crystals from Supercooled, Supersaturated, and Supercompressed Liquids: Role of Crystal-Liquid Interfacial Free Energy

    Directory of Open Access Journals (Sweden)

    Geun Woo Lee

    2017-10-01

    Full Text Available The formation mechanism of metastable crystals from metastable liquids still remains elusive, although controlling the metastability of crystals and liquids already plays a crucial role in designing new materials in physics, chemistry, biology, and materials science. This review article describes how metastable phases can be obtained by controlling temperature, concentration, and pressure. In particular, I show the role of crystal-liquid interfacial free energy in the formation of metastable crystals from metastable liquids at a given driving force. In a microscopic viewpoint, local structure similarity between the metastable crystals and liquid determines the crystal-liquid interfacial free energy, and thus the nucleation barrier for the metastable crystals. The effect of the interfacial free energy on the formation of metastable crystals from supercooled, supersaturated, and supercompressed liquids will be demonstrated with metallic liquids, aqueous solutions, and water.

  17. Gold nanoparticle assisted assembly of a heme protein for enhancement of long-range interfacial electron transfer

    DEFF Research Database (Denmark)

    Jensen, Palle Skovhus; Chi, Qijin; Grumsen, Flemming Bjerg

    2007-01-01

    -defined stoichiometry. The systems were investigated in homogeneous solution and at liquid/solid interface. Conjugation of cyt c results in a small but consistent broadening of the nanoparticle plasmon band. This phenomenon can be explained in terms of long-range electronic interactions between the gold nanoparticle...... and characterization of water-soluble gold nanoparticles (AuNPs) with core diameter 3-4 nm and their application for the enhancement of long-range interfacial ET of a heme protein. Gold nanoparticles were electrostatically conjugated with cyt c to form nanoparticle-protein hybrid ET systems with well...... and the protein molecule. When the nanoparticle-protein conjugates are assembled on Au(111) surfaces, long-range interfacial ET across a physical distance of over 50 A via the nanoparticle becomes feasible. Moreover, significant enhancement of the interfacial ET rate by more than an order of magnitude compared...

  18. Chiral molecular assemblies from a novel achiral amphiphilic 2-(heptadecyl) naphtha[2,3]imidazole through interfacial coordination.

    Science.gov (United States)

    Yuan, Jing; Liu, Minghua

    2003-04-30

    A novel amphiphilic compound 2-(heptadecyl) naphtha[2,3]imidazole (NpImC17) was synthesized, and its coordination with AgNO(3) in situ in the monolayer at the air/water interface and ex situ in the Langmuir-Blodgett (LB) film on solid substrate has been investigated. It has been found that interfacial coordination between NpImC17 and Ag(I) ion occurred both in the monolayer and in the LB film. It is interesting to note that the Ag(I)-coordinated ultrathin film became chiral although the ligand itself is achiral. It was suggested that the chirality of the Ag(I)-coordinated LB film was developed due to the formation of a helical coordination polymer through the interfacial coordination. To the best of our knowledge, this is the first report on the formation of chiral monolayer and LB films from an achiral molecule through interfacial coordination.

  19. The Gaia scientific exploitation networks

    Science.gov (United States)

    Figueras, F.; Jordi, C.

    2015-05-01

    On July 2014 the Gaia satellite, placed at L2 since January 2014, finished their commissioning phase and started collecting high accurate scientific data. New and more realistic estimations of the astrometric, photometric and spectroscopic accuracy expected after five years mission operation (2014-2019) have been recently published in the Gaia Science Performance Web page. Here we present the coordination efforts and the activities being conducted through the two GREAT (Gaia Research for European Astronomy Training) European Networks, the GREAT-ESF, a programme supported by the European Science Foundation (2010-2015), and the GREAT-ITN network, from the European Union's Seventh Framework Programme (2011-2015). The main research theme of these networks is to unravel the origin and history of our home galaxy. Emphasis is placed on the research projects being conducted by the Spanish Researchers through these networks, well coordinated by the Red Española de Explotación Científica de Gaia (REG network, with more than 140 participants). Members of the REG play an important role on the collection of complementary spectroscopic data from ground based telescopes, on the development of new tools for an optimal scientific exploitation of Gaia data and on the preparation task to create the Gaia archive.

  20. Interfacial charge separation and trapping in composite photocatalysts

    Science.gov (United States)

    Chakarov, Dinko

    We explore the phenomena of interfacial charge separation and trapping in composite metal-semiconductor systems and the interaction (energy and charge exchange) between optically excited nanoparticles and the surrounding medium. Disc-shaped copper nanoparticles (Cu NPs) were fabricated by hole-mask colloidal lithography on bare and thin titania film covered fused silica substrates. The dynamics of Cu oxide formation around the NPs were studied in water by localized surface plasmon resonance (LSPR) spectroscopy. We found that the oxidation rate is strongly enhanced under UV irradiation when the NPs are on the surface of the titania film, in comparison to NPs deposited on an inert fused silica substrate. The reason is sought in the ability of TiO2 to create hydroxyl radicals with strong oxidative potential in water under UV irradiation and the charge transfer at the interface between the Cu NPs and the TiO2. The results demonstrate the potential of using LSPR spectroscopy to monitor the oxidation of Cu NPs in situ and in different environments. The work was financially supported by The Nordic Energy Research Council through Project N-I-S-F-D.

  1. Interfacial properties of methane/aqueous VC-713 solution under hydrate formation conditions.

    Science.gov (United States)

    Peng, Bao-Zi; Sun, Chang-Yu; Liu, Peng; Liu, Yan-Tao; Chen, Jun; Chen, Guang-Jin

    2009-08-15

    The interfacial tensions between methane and aqueous solutions of different contents of VC-713 (a terpolymer of N-vinylpyrrolidone, N-vinylcaprolactam, and dimethylamino-ethyl-methacrylate) were measured at different temperatures and pressures in the hydrate formation region. The surface adsorption free energies of methane were calculated accordingly in order to investigate the effect of this kinetic inhibitor on the nucleation of hydrate. The results show that the presence of VC-713 lowers the interfacial tension, increasing the concentration of methane on the surface of the aqueous phase, and thus promotes nucleation of hydrate at the gas/liquid interface. Additionally, the measured interfacial tension data suggest that VC-713 tends not to form micelles in water. Subsequently, the lateral growth rate of hydrate film on the surface of a methane bubble suspended in the aqueous phase was measured at different pressures to investigate the effect of VC-713 on the growth of hydrate. The results show that the lateral growth rate of hydrate film from aqueous VC-713 solution is much lower than that from pure water, demonstrating that VC-713 significantly inhibits the hydrate growth. The mechanism of the inhibition is also discussed.

  2. Interfacial behavior of perchlorate versus chloride ions in saturated aqueous salt solutions

    Energy Technology Data Exchange (ETDEWEB)

    Ghosal, S; Kuo, I W; Baer, M D; Bluhm, H

    2009-04-14

    In recent years combination of theoretical and experimental work have presented a novel view of the aqueous interface wherein hard and/or multiply charged ions are excluded from the interface, but large polarizable anions show interfacial enhancement relative to the bulk. The observed trend in the propensity of anions to adsorb at the air/water interface appears to be reverse of the Hofmeister series for anions. This study focuses on experimental and theoretical examination of the partitioning behavior of perchlorate (ClO{sub 4}{sup -}) and chloride (Cl{sup -}) ions at the air/water interface. We have used ambient pressure X-ray photoelectron spectroscopy technique to directly probe the interfacial concentrations of ClO{sub 4}{sup -} and Cl{sup -} ions in sodium perchlorate and sodium chloride solutions, respectively. Experimental observations are compared with first principles molecular dynamics simulations. Both experimental and simulation results show enhancement of ClO{sub 4}{sup -} ion at the interface, compared with the absence of such enhancement in the case of Cl{sup -} ion. These observations are in agreement with the expected trend in the interfacial propensity of anions based on the Hofmeister series.

  3. Solid-liquid interfacial energy of aminomethylpropanediol

    Energy Technology Data Exchange (ETDEWEB)

    Ocak, Yavuz; Keslioglu, Kazim; Marasli, Necmettin [Department of Physics, Faculty of Arts and Sciences, Erciyes University, 38039 Kayseri (Turkey); Akbulut, Sezen [Department of Physics, Institute of Science and Technology, Erciyes University, 38039 Kayseri (Turkey)], E-mail: marasli@erciyes.edu.tr

    2008-03-21

    The grain boundary groove shapes for equilibrated solid aminomethylpropanediol, 2-amino-2 methyl-1.3 propanediol (AMPD) with its melt were directly observed by using a horizontal temperature gradient stage. From the observed grain boundary groove shapes, the Gibbs-Thomson coefficient ({gamma}), solid-liquid interfacial energy ({sigma}{sub SL}) and grain boundary energy ({sigma}{sub gb}) of AMPD have been determined to be (5.4 {+-} 0.5) x 10{sup -8} K m, (8.5 {+-} 1.3) x 10{sup -3} J m{sup -2} and (16.5 {+-} 2.8) x 10{sup -3} J m{sup -2}, respectively. The ratio of thermal conductivity of equilibrated liquid phase to solid phase for the AMPD has also been measured to be 1.12 at the melting temperature.

  4. Atrito interfacial em escoamento anular transicional

    OpenAIRE

    Marcos Heinzelmann Junqueira Pedras

    1993-01-01

    Resumo: o objetivo deste trabalho é estudar o atrito interfacial em escoamentos anulares co-correntes ascendentes na condição próxima da reversão de fluxo. O fenômeno foi experimentado em laboratório utilizando-se ar e água como fluidos de trabalho. Os resultados são apresentados e comparados com outros da literatura, validando assim os experimentos realizados. É proposta uma correlação para o cálculo da fração de vazio baseada no modelo de deslizamento. Também é proposta uma correlação para ...

  5. Liquid-liquid interfacial nanoparticle assemblies

    Science.gov (United States)

    Emrick, Todd S [South Deerfield, MA; Russell, Thomas P [Amherst, MA; Dinsmore, Anthony [Amherst, MA; Skaff, Habib [Amherst, MA; Lin, Yao [Amherst, MA

    2008-12-30

    Self-assembly of nanoparticles at the interface between two fluids, and methods to control such self-assembly process, e.g., the surface density of particles assembling at the interface; to utilize the assembled nanoparticles and their ligands in fabrication of capsules, where the elastic properties of the capsules can be varied from soft to tough; to develop capsules with well-defined porosities for ultimate use as delivery systems; and to develop chemistries whereby multiple ligands or ligands with multiple functionalities can be attached to the nanoparticles to promote the interfacial segregation and assembly of the nanoparticles. Certain embodiments use cadmium selenide (CdSe) nanoparticles, since the photoluminescence of the particles provides a convenient means by which the spatial location and organization of the particles can be probed. However, the systems and methodologies presented here are general and can, with suitable modification of the chemistries, be adapted to any type of nanoparticle.

  6. Polyamide microcapsules containing jojoba oil prepared by inter-facial polymerization.

    Science.gov (United States)

    Persico, P; Carfagna, C; Danicher, L; Frere, Y

    2005-08-01

    Jojoba oil containing polyamide microcapsules having diameter of approximately 5 microm were prepared by inter-facial polycondensation by direct method (oil-in-water). Qualitative effects of both the formulation and the process parameters on microcapsules characteristics were investigated by SEM observations. Morphological analysis showed the dependence of the external membrane compactness on the chemical nature of the water-soluble polyamine and the oil-soluble acid polychloride: 1,6-hexamethylenediamine (HMDA) and terephthaloyl dichloride (TDC) were found to favour the production of smooth and dense surfaces. The use of ultrasonic irradiations during the dispersion step to get a further reduction of microcapsules size was also evaluated.

  7. Interfacial dislocation motion and interactions in single-crystal superalloys

    Energy Technology Data Exchange (ETDEWEB)

    Liu, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Raabe, D. [Max Planck Inst. fur Eisenforshung. Dusseldorf (Germany); Roters, F. [Max Planck Inst. fur Eisenforshung. Dusseldorf (Germany); Arsenlis, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-10-01

    The early stage of high-temperature low-stress creep in single-crystal superalloys is characterized by the rapid development of interfacial dislocation networks. Although interfacial motion and dynamic recovery of these dislocation networks have long been expected to control the subsequent creep behavior, direct observation and hence in-depth understanding of such processes has not been achieved. Incorporating recent developments of discrete dislocation dynamics models, we simulate interfacial dislocation motion in the channel structures of single-crystal superalloys, and investigate how interfacial dislocation motion and dynamic recovery are affected by interfacial dislocation interactions and lattice misfit. Different types of dislocation interactions are considered: self, collinear, coplanar, Lomer junction, glissile junction, and Hirth junction. The simulation results show that strong dynamic recovery occurs due to the short-range reactions of collinear annihilation and Lomer junction formation. The misfit stress is found to induce and accelerate dynamic recovery of interfacial dislocation networks involving self-interaction and Hirth junction formation, but slow down the steady interfacial motion of coplanar and glissile junction forming dislocation networks. The insights gained from these simulations on high-temperature low-stress creep of single-crystal superalloys are also discussed.

  8. X-ray studies of interfacial strontium-extractant complexes in a model solvent extraction system.

    Science.gov (United States)

    Bu, Wei; Mihaylov, Miroslav; Amoanu, Daniel; Lin, Binhua; Meron, Mati; Kuzmenko, Ivan; Soderholm, L; Schlossman, Mark L

    2014-10-30

    The interfacial behavior of a model solvent extraction liquid-liquid system, consisting of solutions of dihexadecyl phosphate (DHDP) in dodecane and SrCl2 in water, was studied to determine the structure of the interfacial ion-extractant complex and its variation with pH. Previous experiments on a similar extraction system with ErCl3 demonstrated that the kinetics of the extraction process could be greatly retarded by cooling through an adsorption transition, thus providing a method to immobilize ion-extractant complexes at the interface and further characterize them with X-ray interface-sensitive techniques. Here, we use this same method to study the SrCl2 system. X-ray reflectivity and fluorescence near total reflection measured the molecular-scale interfacial structure above and below the adsorption transition for a range of pH. Below the transition, DHDP molecules form a homogeneous monolayer at the interface with Sr(2+) coverage increasing from zero to saturation (one Sr(2+) per two DHDP) within a narrow range of pH. Experimental values of Sr(2+) interfacial density determined from fluorescence measurements are larger than those from reflectivity measurements. Although both techniques probe Sr(2+) bound to DHDP, only the fluorescence provides adequate sensitivity to Sr(2+) in the diffuse double layer. A Stern equation determines the Sr(2+) binding constant from the reflectivity measurements and the additional Sr(2+) measured in the diffuse double layer is accounted for by Gouy-Chapman theory. Above the transition temperature, a dilute concentration of DHDP-Sr complexes resides at the interface, even for temperatures far above the transition. A comparison is made of the structure of the interfacial ion-extractant complex for this divalent metal ion to recent results on trivalent Er(3+) metal ions, which provides insight into the role of metal ion charge on the structure of interfacial ion-extractant complexes, as well as implications for extraction of these two

  9. Oxidation-resistant interfacial coatings for continuous fiber ceramic composites

    Energy Technology Data Exchange (ETDEWEB)

    Stinton, D.P.; Besmann, T.M.; Bleier, A. [Oak Ridge National Lab., TN (United States); Shanmugham, S.; Liaw, P.K. [Univ. of Tennessee, Knoxville, TN (United States)

    1995-08-01

    Continuous fiber ceramic composites mechanical behavior are influenced by the bonding characteristics between the fiber and the matrix. Finite modeling studies suggest that a low-modulus interfacial coating material will be effective in reducing the residual thermal stresses that are generated upon cooling from processing temperatures. Nicalon{trademark}/SiC composites with carbon, alumina and mullite interfacial coatings were fabricated with the SiC matrix deposited using a forced-flow, thermal gradient chemical vapor infiltration process. Composites with mullite interfacial coatings exhibited considerable fiber pull-out even after oxidation and have potential as a composite system.

  10. Packaging of Sin Goods - Commitment or Exploitation?

    DEFF Research Database (Denmark)

    Nafziger, Julia

    to such self-control problems, and possibly exploit them, by offering different package sizes. In a competitive market, either one or three (small, medium and large) packages are offered. In contrast to common intuition, the large, and not the small package is a commitment device. The latter serves to exploit...

  11. The exploitation of Gestalt principles by magicians.

    Science.gov (United States)

    Barnhart, Anthony S

    2010-01-01

    Magicians exploit a host of psychological principles in deceiving their audiences. Psychologists have recently attempted to pinpoint the most common psychological tendencies exploited by magicians. This paper highlights two co-occurring principles that appear to be the basis for many popular magic tricks: accidental alignment and good continuation.

  12. Evolution of Cretan Aqueducts and Their Potential for Hydroelectric Exploitation

    Directory of Open Access Journals (Sweden)

    Triantafyllia G. Nikolaou

    2017-01-01

    Full Text Available In this article, several archaeological, historical and other aspects of aqueducts in Crete, Greece, since the prehistoric times until today, are reviewed and presented. In Crete, since the Minoan era, various water management techniques that are found in modern water technologies were developed and applied. One of the most significant features of the Minoan civilization was the architecture of water supply systems in the palaces and other settlements. These technologies were continued and improved mainly during the Classical, Hellenistic and Roman periods and at the same time spread to other towns in the mainland and islands. The aqueduct technologies developed during the Classical and Hellenistic periods were further developed by Romans, mainly by enlarging their application scale (e.g., water bridges. Several paradigms of Cretan aqueducts are considered by which the significance of those technologies for water supply in areas with limited water resources is justified. A brief presentation and discussion of climatic conditions, the karst hydrogeology and the water resources management in Crete is also included. The article also describes the present water management profile of the island, in terms of the water plants, water supply–irrigation networks, and water renewable energy exploitation of dams and water pipelines.

  13. Exploration, Exploitation, and Organizational Coordination Mechanisms

    Directory of Open Access Journals (Sweden)

    Silvio Popadiuk

    2016-03-01

    Full Text Available This paper presents an empirical relationship among exploration, exploitation, and organizational coordination mechanisms, classified as the centralization of decision-making, formalization, and connectedness. In order to analyze the findings of this survey, we used two techniques: Principal Component Analysis (PCA and Partial Least Squares Path Modeling (PLS-PM. Our analysis was supported by 249 answers from managers of companies located in Brazil (convenience sampling. Contrary to expectations, centralization and exploitation were negatively associated. Our data supports the research hypothesis that formalization is positively associated with exploitation. Although the relationship between formalization and exploration were significant, the result is contrary to the research hypothesis that we made. The relationships among connectedness and exploitation, and connectedness and exploration were both positive and significant. This relationship means that the more connectedness increases, the higher the likelihood of exploitation and exploration.

  14. An Effect Analysis of Comprehensive Treatment of Groundwater Over-Exploitation in Cheng'an County, Hebei Province, China.

    Science.gov (United States)

    Shao, Weiwei; Zhou, Jinjun; Liu, Jiahong; Zhang, Haixing; Wang, Jianhua; Xiang, Chenyao; Yang, Guiyu; Tang, Yun

    2017-01-04

    The comprehensive treatment project of groundwater over-exploitation in Hebei Province has been implemented for more than a year, and the effect of exploitation restriction is in urgent need of evaluation. This paper deals with Cheng'an County of Hebei Province as the research subject. Based on collected hydro-meteorological, socioeconomic, groundwater, and other related data, together with typical regional experimental research, this study generates the effective precipitation-groundwater exploitation (P-W) curve and accompanying research methods, and calculates the quantity of groundwater exploitation restriction. It analyzes the target completion status of groundwater exploitation restriction through water conservancy measures and agricultural practices of the groundwater over-exploitation comprehensive treatment project that was implemented in Cheng'an County in 2014. The paper evaluates the treatment effect of groundwater over-exploitation, as well as provides technical support for the effect evaluation of groundwater exploitation restriction of agricultural irrigation in Cheng'an County and relevant areas.

  15. Water

    Science.gov (United States)

    ... www.girlshealth.gov/ Home Nutrition Nutrition basics Water Water Did you know that water makes up more ... to drink more water Other drinks How much water do you need? top Water is very important, ...

  16. An ab initio molecular dynamics study of the liquid-vapor interface of an aqueous NaCl solution: inhomogeneous density, polarity, hydrogen bonds, and frequency fluctuations of interfacial molecules.

    Science.gov (United States)

    Choudhuri, Jyoti Roy; Chandra, Amalendu

    2014-11-21

    We have presented a first principles simulation study of the structural and dynamical properties of a liquid-vapor interfacial system of a concentrated (5.3 M) aqueous NaCl solution. We have used ab initio molecular dynamics to examine the structural and dynamical properties of the bulk and interfacial regions. The structural aspects of the system that have been considered here include the inhomogeneous density profiles of ions and water molecules, hydrogen bond distributions, orientational profiles, and also vibrational frequency distributions in the bulk and interfacial regions. It is found that the sodium ions are mostly located in the interior, while the chloride anions occupy a significant portion of the interface of the slab. The water dipoles at the interface prefer to orient parallel to the surface. The dynamical aspects of the interfaces are investigated in terms of diffusion, orientational relaxation, hydrogen bond dynamics, and vibrational spectral diffusion. The results of the interfacial dynamics are compared with those of the corresponding bulk region. It is observed that the interfacial molecules exhibit faster diffusion and orientational relaxation with respect to the bulk. However, the interfacial molecules are found to have longer hydrogen bond lifetimes than those of the bulk. We have also investigated the correlations of hydrogen bond relaxation with the vibrational frequency fluctuations of interfacial water molecules.

  17. Interfacial Properties of Methylcelluloses: The Influence of Molar Mass

    Directory of Open Access Journals (Sweden)

    Pauline L. Nasatto

    2014-12-01

    Full Text Available The interfacial interactions of four methylcelluloses having the same average degree of substitution and distribution of methyl groups, but different molar masses, are studied at ambient temperature and at very low polymer concentrations. Firstly, the surface tension σ at the water/air interface is determined for the progressive addition of methylcellulose up to 100 mg/L; σ starts to decrease over 1 mg/L up to the critical aggregation concentration (CAC at 10 mg/L. The curves describing the influence of polymer concentration on σ are independent of the molar mass at equilibrium. Secondly, the adsorption of methylcellulose on silica particles is estimated from ζ-potential measurements. The data are interpreted in terms of an increase of the adsorbed layer thickness at the interface when the molar mass of methylcellulose increases. It is concluded that methylcellulose is adsorbed, forming trains and loops at the interface based on the equilibrium between surface free energy and solvent quality.

  18. Interfacial characterization and analytical applications of chemically-modified surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jianhong [Iowa State Univ., Ames, IA (United States)

    1998-02-23

    The goal of this work is to explore several new strategies and approaches to the surface modification and the microscopic characterization of interfaces in the areas mainly targeting sensor technologies that are of interest to environmental control or monitoring, and scanning probe microscopies techniques that can monitor interfacial chemical reactions in real time. Centered on the main theme, four specific topics are presented as four chapters in this dissertation following the general introduction. Chapter 1 describes the development of two immobilization schemes for covalently immobilizing fluoresceinamine at cellulose acetate and its application as a pH sensing film. Chapter 2 investigates the applicability of SFM to following the base-hydrolysis of a dithio-bis(succinimidylundecanoate) monolayer at gold in situ. Chapter 3 studies the mechanism for the accelerated rate of hydrolysis of the dithio-bis(succinimidylundecanoate) monolayer at Au(111) surface. Chapter 4 focuses on the development of an electrochemical approach to the elimination of chloride interference in Chemical Oxygen Demand (COD) analysis of waste water. The procedures, results and conclusions are described in each chapter. This report contains the introduction, references, and general conclusions. Chapters have been processed separately for inclusion on the data base. 95 refs.

  19. Interfacial area, velocity and void fraction in two-phase slug flow

    Energy Technology Data Exchange (ETDEWEB)

    Kojasoy, G. [Univ. of Wisconsin, Milwaukee, WI (United States); Riznic, J.R. [Atomic Energy Control Board, Ottawa (Canada)

    1997-12-31

    The internal flow structure of air-water plug/slug flow in a 50.3 mm dia transparent pipeline has been experimentally investigated by using a four-sensor resistivity probe. Liquid and gas volumetric superficial velocities ranged from 0.55 to 2.20 m/s and 0.27 to 2.20 m/s, respectively, and area-averaged void fractions ranged from about 10 to 70%. The local distributions of void fractions, interfacial area concentration and interface velocity were measured. Contributions from small spherical bubbles and large elongated slug bubbles toward the total void fraction and interfacial area concentration were differentiated. It was observed that the small bubble void contribution to the overall void fraction was small indicating that the large slug bubble void fraction was a dominant factor in determining the total void fraction. However, the small bubble interfacial area contribution was significant in the lower and upper portions of the pipe cross sections.

  20. Reversed interfacial fractionation of carbonate and bicarbonate evidenced by X-ray photoemission spectroscopy

    Science.gov (United States)

    Lam, Royce K.; Smith, Jacob W.; Rizzuto, Anthony M.; Karslıoǧlu, Osman; Bluhm, Hendrik; Saykally, Richard J.

    2017-03-01

    The fractionation of ions at liquid interfaces and its effects on the interfacial structure are of vital importance in many scientific fields. Of particular interest is the aqueous carbonate system, which governs both the terrestrial carbon cycle and physiological respiration systems. We have investigated the relative fractionation of carbonate, bicarbonate, and carbonic acid at the liquid/vapor interface finding that both carbonate (CO32-) and carbonic acid (H2CO3) are present in higher concentrations than bicarbonate (HCO3-) in the interfacial region. While the interfacial enhancement of a neutral acid relative to a charged ion is expected, the enhancement of doubly charged, strongly hydrated carbonate anion over the singly charged, less strongly hydrated bicarbonate ion is surprising. As vibrational sum frequency generation experiments have concluded that both carbonate and bicarbonate anions are largely excluded from the air/water interface, the present results suggest that there exists a significant accumulation of carbonate below the depletion region outside of the area probed by sum frequency generation.

  1. Interfacial Behavior of Polymers: Using Interfaces to Manipulate Polymers

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Thomas P. [Univ. of Massachusetts, Amherst, MA (United States). Dept. of Polymer Science and Engineering

    2015-02-26

    The self-assembly of block copolymers into arrays of nanoscopic domains with areal densities approaching 10 terbit/in2 offer tremendous promise for the fabrication of ultrahigh density storage devices, batteries and other energy relevant devices. Interfacial interactions play a key role in dictating the orientation and ordering of these self-assembling materials. We have investigated the use of preferential and neutral solvents to overcome interfacial interactions and to rapid accelerate the dynamics of these materials, since the high molecular weight of the polymers significantly slows diffusion processes. Using a tailor-made chamber, we have introduced solvent vapor annealing (SVA) where solvent with a well-defined vapor pressures sells the copolymer film, enabling control over the solvent content in the film and, therefore, the thermodynamics governing the microphase separation of the copolymer, the interactions with the substrate and air interfaces and the dynamics. This tailor-made chamber also allows us to perform in situ grazing incidence x-ray scattering studies where the copolymer films can be characterized on the nanoscopic level over macroscopic distances. The methodologies developed in our laboratories are now used in numerous laboratories world-wide. We have found that arrays of block copolymer microdomains with perfect orientational order can be achieved over macroscopic areas using the SVA processes but the translational order is perturbed during the film drying process. As the copolymer film is swollen, the confinement of the film to the substrate introduces a frustration to the ordering of the microdomains. After equilibrium is achieved, when the swollen films are brought very close to the ordering transition, near perfect ordering is achieved. However, upon removal of the solvent, the confinement of the film to the substrate introduces translational disorder. We have investigated the influence of the rate of solvent removal and have found that

  2. Final Project Report for "Interfacial Thermal Resistance of Carbon Nanotubes”

    Energy Technology Data Exchange (ETDEWEB)

    Cumings, John [Univ. of Maryland, College Park, MD (United States)

    2016-04-15

    This report describes an ongoing project to comprehensively study the interfacial thermal boundary resistance (Kapitza resistance) of carbon nanotubes. It includes a list of publications, personnel supported, the overall approach, accomplishments and future plans.

  3. Charles J. McMahon Interfacial Segregation and Embrittlement Symposium

    National Research Council Canada - National Science Library

    Vitek, Vaclav

    2003-01-01

    .... McMahon Interfacial Segregation and Embrittlement Symposium: Grain Boundary Segregation and Fracture in Steels was sponsored by ASM International, Materials Science Critical Technology Sector, Structural Materials Division, Materials Processing...

  4. Evanescent wave induced fluorescence. A tool for quantitative interfacial analysis

    CERN Document Server

    Byrne, C D

    2000-01-01

    Time-resolved angle-resolved evanescent wave induced fluorescence spectroscopy (EWIFS) has been used, for the first time, to determine interfacial concentration distributions of molecular species. Theoretical calculations demonstrate that in dynamic systems the non-radiative fluorescence decay coefficients of molecular species are effected only in a minor way by the presence of a dielectric interface. Consequently, measurements of interfacial fluorescence decay times are used to probe variations in molecular fluorescence quantum efficiencies, caused by the presence of an interface. The understanding of these variations is combined with angle-resolved evanescent wave theory. Examination of derived theoretical models using simulated data demonstrates that angle-resolved EWIFS is capable of measuring interfacial interactions on a nanometer scale. An evanescent wave induced fluorescence spectrometer is designed and fabricated to allow the measurement of the time-integrated and time-resolved interfacial emission. ...

  5. On the interfacial fracture resistance of resin-bonded zirconia and glass-infiltrated graded zirconia.

    Science.gov (United States)

    Chai, Herzl; Kaizer, Marina; Chughtai, Asima; Tong, Hui; Tanaka, Carina; Zhang, Yu

    2015-11-01

    A major limiting factor for the widespread use of zirconia in prosthetic dentistry is its poor resin-cement bonding capabilities. We show that this deficiency can be overcome by infiltrating the zirconia cementation surface with glass. Current methods for assessing the fracture resistance of resin-ceramic bonds are marred by uneven stress distribution at the interface, which may result in erroneous interfacial fracture resistance values. We have applied a wedge-loaded double-cantilever-beam testing approach to accurately measure the interfacial fracture resistance of adhesively bonded zirconia-based restorative materials. The interfacial fracture energy GC was determined for adhesively bonded zirconia, graded zirconia and feldspathic ceramic bars. The bonding surfaces were subjected to sandblasting or acid etching treatments. Baseline GC was measured for bonded specimens subjected to 7 days hydration at 37°C. Long-term GC was determined for specimens exposed to 20,000 thermal cycles between 5 and 55°C followed by 2-month aging at 37°C in water. The test data were interpreted with the aid of a 2D finite element fracture analysis. The baseline and long-term GC for graded zirconia was 2-3 and 8 times greater than that for zirconia, respectively. More significantly, both the baseline and long-term GC of graded zirconia were similar to those for feldspathic ceramic. The interfacial fracture energy of feldspathic ceramic and graded zirconia was controlled by the fracture energy of the resin cement while that of zirconia by the interface. GC for the graded zirconia was as large as for feldspathic ceramic, making it an attractive material for use in dentistry. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  6. Structural and dynamic interfacial properties of the lipoprotein initiating domain of apolipoprotein B.

    Science.gov (United States)

    Ledford, Aubrey S; Cook, Victoria A; Shelness, Gregory S; Weinberg, Richard B

    2009-01-01

    To better understand the earliest steps in the assembly of triglyceride (TG)-rich lipoproteins, we compared the biophysical and interfacial properties of two closely related apolipoprotein B (apoB) truncation mutants, one of which contains the complete lipoprotein initiating domain (apoB20.1; residues 1-912), and one of which, by virtue of a 50 amino acid C-terminal truncation, is incapable of forming nascent lipoproteins (apoB19; residues 1-862). Spectroscopic studies detected no major differences in secondary structure, and only minor differences in conformation and thermodynamic stability, between the two truncation mutants. Monolayer studies revealed that both apoB19 and apoB20.1 bound to and penetrated egg phosphatidylcholine (EPC) monolayers; however, the interfacial exclusion pressure of apoB20.1 was higher than apoB19 (25.1 mN/m vs. 22.8 mN/m). Oil drop tensiometry revealed that both proteins bound rapidly to the hydrophobic triolein/water interface, reducing interfacial tension by approximately 20 mN/m. However, when triolein drops were first coated with phospholipids (PL), apoB20.1 bound with faster kinetics than apoB19 and also displayed greater interfacial elasticity (26.9 +/- 0.8 mN/m vs. 22.9 +/- 0.8 mN/m). These data establish that the transition of apoB to assembly competence is accompanied by increases in surface activity and elasticity, but not by significant changes in global structure.

  7. Interfacial Characteristics and Bond Durability of Universal Adhesive to Various Substrates.

    Science.gov (United States)

    Tsujimoto, A; Barkmeier, W W; Takamizawa, T; Wilwerding, T M; Latta, M A; Miyazaki, M

    This study investigated the interfacial characteristics and bond durability of universal adhesives to various substrates. Two universal adhesives were used: 1) Scotchbond Universal and 2) G-Premio Bond. The substrates used were bovine enamel and dentin with or without phosphoric acid etching, resin composite, lithium disilicate and leucite-reinforced glass ceramics, zirconia, and metal alloys. The surface free energy and the parameters of various substrates and of substrates treated by adhesive after light irradiation were determined by measuring the contact angles of three test liquids. Resin composite was bonded to the various substrates to determine shear bond strength after 24 hours water storage and 10,000 thermal cycles. A one-way analysis of variance (ANOVA) and the Tukey post hoc test were used for the surface free energy data, and a two-way ANOVA and the Tukey post hoc test were used for analysis of shear bond strength data (α=0.05). The interfacial characteristics of the various substrates show significant differences depending on the type of substrate, but the interfacial characteristics of substrate treated by adhesive after light irradiation did not show any significant differences regardless of the substrate used. The bond durability of two universal adhesives to various substrates differs depending on the type of substrate and the adhesive. The results of this study suggest that universal adhesives modify the interfacial characteristics of a wide range of substrates and create a consistent surface, but the bond durability of universal adhesive to various substrates differs depending on the type of substrate and the adhesive.

  8. Modeling interfacial liquid layers on environmental ices

    Directory of Open Access Journals (Sweden)

    M. H. Kuo

    2011-09-01

    Full Text Available Interfacial layers on ice significantly influence air-ice chemical interactions. In solute-containing aqueous systems, a liquid brine may form upon freezing due to the exclusion of impurities from the ice crystal lattice coupled with freezing point depression in the concentrated brine. The brine may be segregated to the air-ice interface where it creates a surface layer, in micropockets, or at grain boundaries or triple junctions.

    We present a model for brines and their associated liquid layers in environmental ice systems that is valid over a wide range of temperatures and solute concentrations. The model is derived from fundamental equlibrium thermodynamics and takes into account nonideal solution behavior in the brine, partitioning of the solute into the ice matrix, and equilibration between the brine and the gas phase for volatile solutes. We find that these phenomena are important to consider when modeling brines in environmental ices, especially at low temperatures. We demonstrate its application for environmentally important volatile and nonvolatile solutes including NaCl, HCl, and HNO3. The model is compared to existing models and experimental data from literature where available. We also identify environmentally relevant regimes where brine is not predicted to exist, but the QLL may significantly impact air-ice chemical interactions. This model can be used to improve the representation of air-ice chemical interactions in polar atmospheric chemistry models.

  9. Quantum interference in an interfacial superconductor.

    Science.gov (United States)

    Goswami, Srijit; Mulazimoglu, Emre; Monteiro, Ana M R V L; Wölbing, Roman; Koelle, Dieter; Kleiner, Reinhold; Blanter, Ya M; Vandersypen, Lieven M K; Caviglia, Andrea D

    2016-10-01

    The two-dimensional superconductor that forms at the interface between the complex oxides lanthanum aluminate (LAO) and strontium titanate (STO) has several intriguing properties that set it apart from conventional superconductors. Most notably, an electric field can be used to tune its critical temperature (T c ; ref. 7), revealing a dome-shaped phase diagram reminiscent of high-T c superconductors. So far, experiments with oxide interfaces have measured quantities that probe only the magnitude of the superconducting order parameter and are not sensitive to its phase. Here, we perform phase-sensitive measurements by realizing the first superconducting quantum interference devices (SQUIDs) at the LAO/STO interface. Furthermore, we develop a new paradigm for the creation of superconducting circuit elements, where local gates enable the in situ creation and control of Josephson junctions. These gate-defined SQUIDs are unique in that the entire device is made from a single superconductor with purely electrostatic interfaces between the superconducting reservoir and the weak link. We complement our experiments with numerical simulations and show that the low superfluid density of this interfacial superconductor results in a large, gate-controllable kinetic inductance of the SQUID. Our observation of robust quantum interference opens up a new pathway to understanding the nature of superconductivity at oxide interfaces.

  10. The Role of Shearing Energy and Interfacial Gibbs Free Energy in the Emulsification Mechanism of Waxy Crude Oil

    Directory of Open Access Journals (Sweden)

    Zhihua Wang

    2017-05-01

    Full Text Available Crude oil is generally produced with water, and the water cut produced by oil wells is increasingly common over their lifetime, so it is inevitable to create emulsions during oil production. However, the formation of emulsions presents a costly problem in surface process particularly, both in terms of transportation energy consumption and separation efficiency. To deal with the production and operational problems which are related to crude oil emulsions, especially to ensure the separation and transportation of crude oil-water systems, it is necessary to better understand the emulsification mechanism of crude oil under different conditions from the aspects of bulk and interfacial properties. The concept of shearing energy was introduced in this study to reveal the driving force for emulsification. The relationship between shearing stress in the flow field and interfacial tension (IFT was established, and the correlation between shearing energy and interfacial Gibbs free energy was developed. The potential of the developed correlation model was validated using the experimental and field data on emulsification behavior. It was also shown how droplet deformation could be predicted from a random deformation degree and orientation angle. The results indicated that shearing energy as the energy produced by shearing stress working in the flow field is the driving force activating the emulsification behavior. The deformation degree and orientation angle of dispersed phase droplet are associated with the interfacial properties, rheological properties and the experienced turbulence degree. The correlation between shearing stress and IFT can be quantified if droplet deformation degree vs. droplet orientation angle data is available. When the water cut is close to the inversion point of waxy crude oil emulsion, the interfacial Gibbs free energy change decreased and the shearing energy increased. This feature is also presented in the special regions where

  11. Exploratory numerical experiments with a macroscopic theory of interfacial interactions

    Science.gov (United States)

    Giordano, D.; Solano-López, P.; Donoso, J. M.

    2017-09-01

    Phenomenological theories of interfacial interactions are founded on the core idea to model macroscopically the thin layer that forms between media in contact as a two-dimensional continuum (surface phase or interface) characterised by physical properties per unit area; the temporal evolution of the latter is governed by surface balance equations whose set acts as bridging channel in between the governing equations of the volume phases. These theories have targeted terrestrial applications since long time and their exploitation has inspired our research programme to build up, on the same core idea, a macroscopic theory of gas-surface interactions targeting the complex phenomenology of hypersonic reentry flows as alternative to standard methods in aerothermodynamics based on accommodation coefficients. The objective of this paper is the description of methods employed and results achieved in the exploratory study that kicked off our research programme, that is, the unsteady heat transfer between two solids in contact in planar and cylindrical configurations with and without interface. It is a simple numerical-demonstrator test case designed to facilitate quick numerical calculations but, at the same time, to bring forth already sufficiently meaningful aspects relevant to thermal protection due to the formation of the interface. The paper begins with a brief introduction on the subject matter and a review of relevant literature within an aerothermodynamics perspective. Then the case is considered in which the interface is absent. The importance of tension (force per unit area) continuity as boundary condition on the same footing of heat-flux continuity is recognised and the role of the former in governing the establishment of the temperature-difference distribution over the separation surface is explicitly shown. Evidence is given that the standard temperature-continuity boundary condition is just a particular case. Subsequently the case in which the interface is

  12. Reasoning About Programs by Exploiting the Environment

    Science.gov (United States)

    1994-02-02

    1i TITLE ( lude Security Ca .fcation) Reasoning about Programs by Exploiting the Environment rt 12. PERSONAL AUTHOR(S) w]ba1oa Ui.tm A Limor Fix axd...editions are obsolete. Reasoning About Programs by Exploiting the Environment * Limor Fix Fred B. Schneider TR 94-1409 February 1994 Department of Computer...agencies. Limor Fix is also supported, in part, by a Fullbright post-doctoral award. Reasoning about Programs by Exploiting the Environment ---- NITIS GRA&I

  13. Interfacial rheology: An overview of measuring techniques and its role in dispersions and electrospinning

    OpenAIRE

    Pelipenko, Jan; KRISTL, JULIJANA; Rošic, Romana; Baumgartner, Saša; KOCBEK, PETRA

    2012-01-01

    Interfacial rheological properties have yet to be thoroughly explored. Only recently, methods have been introduced that provide sufficient sensitivity to reliably determine viscoelastic interfacial properties. In general, interfacial rheology describes the relationship between the deformation of an interface and the stresses exerted on it. Due to the variety in deformations of the interfacial layer (shear and expansions or compressions), the field of interfacial rheology is divided into the s...

  14. Solid-Liquid Interfacial Effects on Residual Oil Distribution Utilizing Three-Dimensional Micro Network Models

    Directory of Open Access Journals (Sweden)

    Weiyao Zhu

    2017-12-01

    Full Text Available A number of experiments on fluid flow at the micro/nano-scale have demonstrated that flow velocity obviously deviates from the classical Poiseuille’s law due to the micro forces between the wall and the fluid. Based on an oil–water two-phase network simulation model, a three-dimensional pore-scale micro network model with solid–liquid interfacial effects was established. The influences of solid–liquid interface effects including van der Waals force and wettability on the residual oil distribution and relative permeability were investigated through microscopic simulation. The effects of pore radius, pore–throat size ratio, shaping factor, and coordination number on the residual oil distribution were analyzed at the same time. The results showed that the oil recovery would be overestimated by about 4% without van der Waals force in a water-wet reservoir. The impact of van der Waals force on water-wet reservoirs was significantly obvious in contrast with oil-wet reservoirs. In addition, the residual oil distribution was significantly influenced by pore radius in water-wet reservoir, comparatively influenced by pore–throat size ratio in oil-wet reservoir. The present study illustrates the successful application of three-dimensional micro network models considering solid–liquid interfacial effects, and provides new insights for oil recovery enhancement.

  15. Influence of photoirradiation conditions on dentin bond durability and interfacial characteristics of universal adhesives.

    Science.gov (United States)

    Hirai, Kazutaka; Tsujimoto, Akimasa; Nojiri, Kie; Ueta, Hirofumi; Takamizawa, Toshiki; Barkmeier, Wayne W; Latta, Mark A; Miyazaki, Masashi

    2017-06-23

    The influence of photoirradiation conditions on dentin bond durability and interfacial characteristics of universal adhesives was investigated. Universal adhesives were applied to the dentin surfaces and photoirradiated with 100 mW/cm(2) for 40 s, 200 mW/cm(2) for 20 s, and 400 mW/cm(2) for 10 s. A resin composite was bonded to dentin to determine shear bond strength after 24 h water storage and 30,000 thermal cycles, and water contact angle of cured adhesive were measured by the sessile drop method. Greater dentin bond strengths after 24 h water storage and 30,000 thermal cycles were achieved under these conditions at light intensity exceeding 200 mW/cm(2). Universal adhesives photoirradiated above 200 mW/cm(2) exhibited significantly higher water contact angles than those at 100 mW/cm(2). The results of this study suggested that the photoirradiation conditions affect the dentin bond durability and interfacial characteristics of universal adhesives even at the same total energy.

  16. Exploitative and Deceptive Resource Acquisition Strategies

    Directory of Open Access Journals (Sweden)

    Joshua J. Reynolds

    2015-07-01

    Full Text Available Life history strategy (LHS and life history contingencies (LHCs should theoretically influence the use of exploitative and deceptive resource acquisition strategies. However, little research has been done in this area. The purpose of the present work was to create measures of exploitative strategies and test the predictions of life history theory. Pilot studies developed and validated a behavioral measure of cheating called the Dot Game. The role of individual LHS and LHCs (manipulated via validated story primes on cheating was investigated in Study 1. Studies 2a through 2c were conducted to develop and validate a self-report measure called the Exploitative and Deceptive Resource Acquisition Strategy Scale (EDRASS. Finally, Study 3 investigated life history and EDRASS. Results indicated that while LHS influences exploitative strategies, life history contingences had little effect. Implications of these findings are discussed.

  17. Life History Theory and Exploitative Strategies

    Directory of Open Access Journals (Sweden)

    Joshua J. Reynolds

    2016-07-01

    Full Text Available Exploitative strategies involve depriving others of resources while enhancing one’s own. Life history theory suggests that there are individual differences (life history strategy and environmental characteristics (life history contingencies [LHCs] that influence the use of exploitative strategies. However, past work manipulating LHCs has found mixed evidence for the influence of this information on exploitative behavior. We present three studies that help clarify the effects of this type of information. Results indicated that younger individuals are most sensitive to LHC information. We also found, contrary to predictions, that communicating slow LHC information (i.e., high population density, intraspecific competition, and resource scarcity increased rather than decreased the temptation to engage in exploitative behavior. Limitations and future directions are discussed.

  18. Measurements of interfacial film thickness for immiscible liquid liquid slug/droplet flows

    Science.gov (United States)

    Qiu, Huihe; Wang, Xishi; Hong, Fangjun

    2005-06-01

    A novel method for measuring the interfacial liquid film thickness between immiscible liquids of a slug/droplet in a micropipe is proposed. This method is capable of measuring an oil slug/droplet in water with the relative refractive index (m) between the immiscible liquids very close to one in a capillary tube. Unlike the measurement configuration for an air slug in water, an optical oriental for optimizing the refracted fringes pattern by the liquid-liquid interface is introduced. Measurements of film thicknesses of a kerosene oil droplet/slug in a water wetted capillary tube (m > 1) and a water droplet/slug in a kerosene oil wetted capillary tube (m diagnostic method is easy to implement and it will have great potential for immiscible liquid flow research in microfluidic channels.

  19. Liposomal cancer therapy: exploiting tumor characteristics

    DEFF Research Database (Denmark)

    Kaasgaard, Thomas; Andresen, Thomas Lars

    2010-01-01

    the reader will gain: The review focuses on strategies that exploit characteristic features of solid tumors, such as abnormal vasculature, overexpression of receptors and enzymes, as well as acidic and thiolytic characteristics of the tumor microenvironment. Take home message: It is concluded that the design...... of new liposomal drug delivery systems that better exploit tumor characteristic features is likely to result in more efficacious cancer treatments....

  20. Exploring, exploiting and evolving diversity of aquatic ecosystem models

    DEFF Research Database (Denmark)

    Janssen, Annette B. G.; Arhonditsis, George B.; Beusen, Arthur

    2015-01-01

    Here, we present a community perspective on how to explore, exploit and evolve the diversity in aquatic ecosystem models. These models play an important role in understanding the functioning of aquatic ecosystems, filling in observation gaps and developing effective strategies for water quality...... management. In this spirit, numerous models have been developed since the 1970s. We set off to explore model diversity by making an inventory among 42 aquatic ecosystem modellers, by categorizing the resulting set of models and by analysing them for diversity. We then focus on how to exploit model diversity...... by comparing and combining different aspects of existing models. Finally, we discuss how model diversity came about in the past and could evolve in the future. Throughout our study, we use analogies from biodiversity research to analyse and interpret model diversity. We recommend to make models publicly...

  1. Aligned carbon nanotube, graphene and graphite oxide thin films via substrate-directed rapid interfacial deposition.

    Science.gov (United States)

    D'Arcy, Julio M; Tran, Henry D; Stieg, Adam Z; Gimzewski, James K; Kaner, Richard B

    2012-05-21

    A procedure for depositing thin films of carbon nanostructures is described that overcomes the limitations typically associated with solution based methods. Transparent and conductively continuous carbon coatings can be grown on virtually any type of substrate within seconds. Interfacial surface tension gradients result in directional fluid flow and film spreading at the water/oil interface. Transparent films of carbon nanostructures are produced including aligned ropes of single-walled carbon nanotubes and assemblies of single sheets of chemically converted graphene and graphite oxide. Process scale-up, layer-by-layer deposition, and a simple method for coating non-activated hydrophobic surfaces are demonstrated.

  2. Effects of metallic nanoparticle doped flux on the interfacial intermetallic compounds between lead-free solder ball and copper substrate

    Energy Technology Data Exchange (ETDEWEB)

    Sujan, G.K., E-mail: sgkumer@gmail.com; Haseeb, A.S.M.A., E-mail: haseeb@um.edu.my; Afifi, A.B.M., E-mail: amalina@um.edu.my

    2014-11-15

    Lead free solders currently in use are prone to develop thick interfacial intermetallic compound layers with rough morphology which are detrimental to the long term solder joint reliability. A novel method has been developed to control the morphology and growth of intermetallic compound layers between lead-free Sn–3.0Ag–0.5Cu solder ball and copper substrate by doping a water soluble flux with metallic nanoparticles. Four types of metallic nanoparticles (nickel, cobalt, molybdenum and titanium) were used to investigate their effects on the wetting behavior and interfacial microstructural evaluations after reflow. Nanoparticles were dispersed manually with a water soluble flux and the resulting nanoparticle doped flux was placed on copper substrate. Lead-free Sn–3.0Ag–0.5Cu solder balls of diameter 0.45 mm were placed on top of the flux and were reflowed at a peak temperature of 240 °C for 45 s. Angle of contact, wetting area and interfacial microstructure were studied by optical microscopy, field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. It was observed that the angle of contact increased and wetting area decreased with the addition of cobalt, molybdenum and titanium nanoparticles to flux. On the other hand, wettability improved with the addition of nickel nanoparticles. Cross-sectional micrographs revealed that both nickel and cobalt nanoparticle doping transformed the morphology of Cu{sub 6}Sn{sub 5} from a typical scallop type to a planer one and reduced the intermetallic compound thickness under optimum condition. These effects were suggested to be related to in-situ interfacial alloying at the interface during reflow. The minimum amount of nanoparticles required to produce the planer morphology was found to be 0.1 wt.% for both nickel and cobalt. Molybdenum and titanium nanoparticles neither appear to undergo alloying during reflow nor have any influence at the solder/substrate interfacial reaction. Thus, doping

  3. Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing

    Science.gov (United States)

    Yuan, Haojie; Zhang, Shouchun; Lu, Chunxiang; He, Shuqing; An, Feng

    2013-08-01

    An organic solvent-free polyamic acid (PAA) nanoemulsion was obtained by direct ionization of the solid PAA in deionized water, with the average particle size of 261 nm and Zeta potential of -55.1 mV, and used as a carbon fiber sizing to improve the interfacial adhesion between the carbon fiber and polyether sulfone (PES). The surface characteristics of PAA coated carbon fibers were investigated using Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy and dynamic contact angle measurement. The results demonstrated that a continuous and uniform PAA sizing layer was formed on the surface of carbon fibers, and the surface energy of carbon fibers increased from 42.91 to 54.55 mN/m after sizing treatment. The single fiber pull-out testing was also performed, which showed the increased interfacial shear strength (IFSS) of carbon fiber/PES composites from 33.6 to 49.7 MPa by 47.9%. The major reasons for the improved interfacial adhesion were the increased van der Waals forces between the PES matrix and sizing layer as well as the chemical bonding between the sizing layer and carbon fiber surface. Furthermore, the PAA sizing also presented a positive effect on the interfacial adhesion of carbon fiber/PES composites under hydrothermal condition.

  4. Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Haojie [National Engineering Laboratory for carbon fiber technology, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhang, Shouchun, E-mail: zschun@sxicc.ac.cn [National Engineering Laboratory for carbon fiber technology, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China); Lu, Chunxiang, E-mail: chunxl@sxicc.ac.cn [National Engineering Laboratory for carbon fiber technology, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China); He, Shuqing [National Engineering Laboratory for carbon fiber technology, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); An, Feng [National Engineering Laboratory for carbon fiber technology, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China)

    2013-08-15

    An organic solvent-free polyamic acid (PAA) nanoemulsion was obtained by direct ionization of the solid PAA in deionized water, with the average particle size of 261 nm and Zeta potential of −55.1 mV, and used as a carbon fiber sizing to improve the interfacial adhesion between the carbon fiber and polyether sulfone (PES). The surface characteristics of PAA coated carbon fibers were investigated using Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy and dynamic contact angle measurement. The results demonstrated that a continuous and uniform PAA sizing layer was formed on the surface of carbon fibers, and the surface energy of carbon fibers increased from 42.91 to 54.55 mN/m after sizing treatment. The single fiber pull-out testing was also performed, which showed the increased interfacial shear strength (IFSS) of carbon fiber/PES composites from 33.6 to 49.7 MPa by 47.9%. The major reasons for the improved interfacial adhesion were the increased van der Waals forces between the PES matrix and sizing layer as well as the chemical bonding between the sizing layer and carbon fiber surface. Furthermore, the PAA sizing also presented a positive effect on the interfacial adhesion of carbon fiber/PES composites under hydrothermal condition.

  5. [Impacts of hydroelectric cascade exploitation on river ecosystem and landscape: a review].

    Science.gov (United States)

    Yang, Kun; Deng, Xi; Li, Xue-Ling; Wen, Ping

    2011-05-01

    Hydroelectric cascade exploitation, one of the major ways for exploiting water resources and developing hydropower, not only satisfies the needs of various national economic sectors, but also promotes the socio-economic sustainable development of river basin. unavoidable anthropogenic impacts on the entire basin ecosystem. Based on the process of hydroelectric cascade exploitation and the ecological characteristics of river basins, this paper reviewed the major impacts of hydroelectric cascade exploitation on dam-area ecosystems, river reservoirs micro-climate, riparian ecosystems, river aquatic ecosystems, wetlands, and river landscapes. Some prospects for future research were offered, e.g., strengthening the research of chain reactions and cumulative effects of ecological factors affected by hydroelectric cascade exploitation, intensifying the study of positive and negative ecological effects under the dam networks and their joint operations, and improving the research of successional development and stability of basin ecosystems at different temporal and spatial scales.

  6. Atmospheric Plasma Treatment of Nylon 6,6 for Improved Interfacial Adhesion in Thermoplastic Composites

    Science.gov (United States)

    Bujanda, A. A.; Wu, C.; Demaree, J. D.; Robinette, E. J.; Weerasooriya, A.; Flanagan, D.

    The physio-chemical modifications of polyamide (Nylon 6,6) obtained from exposure to an atmospheric dielectric barrier discharge were examined. Specifically, the surface energy, surface chemical composition, and interfacial adhesive strength were studied using water contact angle goniometry, x-ray photoelectron spectroscopy, and single joint lap shear testing. Nylon substrates were plasma treated with both O2 and water vapor (H2O) in He for 30, 60, and 180 seconds, resulting in the functionalization of the surface via the addition of reactive chemical groups such as -OH that change the energy, composition, and reactivity of the surface. The studies revealed that He/H2O plasma treatments were more effective at functionalizing the surface than He/O2 plasma treatments, resulting in a more than 40% decrease in the water contact angle. XPS results show a significant increase in the amount of surface oxygen after treatment, and lap shear experiments show an almost ˜300% increase in interfacial adhesive strength.

  7. A numerical investigation on the influence of liquid properties and interfacial heat transfer during microdroplet deposition onto a glass substrate

    CERN Document Server

    Bhardwaj, Rajneesh; Attinger, Daniel

    2010-01-01

    This work investigates the impingement of a liquid microdroplet onto a glass substrate at different temperatures. A finite-element model is applied to simulate the transient fluid dynamics and heat transfer during the process. Results for impingement under both isothermal and non-isothermal conditions are presented for four liquids: isopropanol, water, dielectric fluid (FC-72) and eutectic tin-lead solder (63Sn-37Pb). The objective of the work is to select liquids for a combined numerical and experimental study involving a high resolution, laser-based interfacial temperature measurement to measure interfacial heat transfer during microdroplet deposition. Applications include spray cooling, micro-manufacturing and coating processes, and electronics packaging. The initial droplet diameter and impact velocity are 80 {\\mu}m and 5 m/s, respectively. For isothermal impact, our simulations with water and isopropanol show very good agreement with experiments. The magnitude and rates of spreading for all four liquids ...

  8. Some Aspects of Interfacial Phenomena in Steelmaking and Refining

    Science.gov (United States)

    Wang, L. J.; Viswanathan, N. N.; Muhmood, L.; Kapilashrami, E.; Seetharaman, S.

    2016-08-01

    Unique experiments were designed to study the surface phenomena in steelmaking reactions. The concept of surface sulfide capacities and an understanding of the surface accumulation of surface-active species, based on experimental results, are presented. In order to understand the flow phenomenon at slag/metal interface, experiments were designed to measure the interfacial velocity of S on the surface of an iron drop immersed in an aluminosilicate slag using the X-ray sessile drop method. The oscillation of the iron drop in the slag due to the change in the surface concentration of sulfur at the slag-metal interface was monitored by X-ray imaging. From the observations, the interfacial velocity of sulfur was evaluated. Similar experiments were performed to measure the interfacial velocity of oxygen at the interface as well as the impact of oxygen potential on the interfacial velocity of sulfur. The interfacial shear viscosity and the dilatational modulus were also evaluated. In a study of the wetting of alumina base by iron drop at constant oxygen pressure under isothermal condition, the contact angle was found to be decreased with the progress of the reaction leading to the formation of hercynite as an intermediate layer creating non-wetting conditions. In the case of silica substrate, an intermediate liquid fayalite layer was formed.

  9. Modeling interfacial area transport in multi-fluid systems

    Energy Technology Data Exchange (ETDEWEB)

    Yarbro, Stephen Lee [Univ. of California, Berkeley, CA (United States)

    1996-11-01

    Many typical chemical engineering operations are multi-fluid systems. They are carried out in distillation columns (vapor/liquid), liquid-liquid contactors (liquid/liquid) and other similar devices. An important parameter is interfacial area concentration, which determines the rate of interfluid heat, mass and momentum transfer and ultimately, the overall performance of the equipment. In many cases, the models for determining interfacial area concentration are empirical and can only describe the cases for which there is experimental data. In an effort to understand multiphase reactors and the mixing process better, a multi-fluid model has been developed as part of a research effort to calculate interfacial area transport in several different types of in-line static mixers. For this work, the ensemble-averaged property conservation equations have been derived for each fluid and for the mixture. These equations were then combined to derive a transport equation for the interfacial area concentration. The final, one-dimensional model was compared to interfacial area concentration data from two sizes of Kenics in-line mixer, two sizes of concurrent jet and a Tee mixer. In all cases, the calculated and experimental data compared well with the highest scatter being with the Tee mixer comparison.

  10. Multiscale Modeling of Mesoscale and Interfacial Phenomena

    Science.gov (United States)

    Petsev, Nikolai Dimitrov

    With rapidly emerging technologies that feature interfaces modified at the nanoscale, traditional macroscopic models are pushed to their limits to explain phenomena where molecular processes can play a key role. Often, such problems appear to defy explanation when treated with coarse-grained continuum models alone, yet remain prohibitively expensive from a molecular simulation perspective. A prominent example is surface nanobubbles: nanoscopic gaseous domains typically found on hydrophobic surfaces that have puzzled researchers for over two decades due to their unusually long lifetimes. We show how an entirely macroscopic, non-equilibrium model explains many of their anomalous properties, including their stability and abnormally small gas-side contact angles. From this purely transport perspective, we investigate how factors such as temperature and saturation affect nanobubbles, providing numerous experimentally testable predictions. However, recent work also emphasizes the relevance of molecular-scale phenomena that cannot be described in terms of bulk phases or pristine interfaces. This is true for nanobubbles as well, whose nanoscale heights may require molecular detail to capture the relevant physics, in particular near the bubble three-phase contact line. Therefore, there is a clear need for general ways to link molecular granularity and behavior with large-scale continuum models in the treatment of many interfacial problems. In light of this, we have developed a general set of simulation strategies that couple mesoscale particle-based continuum models to molecular regions simulated through conventional molecular dynamics (MD). In addition, we derived a transport model for binary mixtures that opens the possibility for a wide range of applications in biological and drug delivery problems, and is readily reconciled with our hybrid MD-continuum techniques. Approaches that couple multiple length scales for fluid mixtures are largely absent in the literature, and

  11. Exploitation in International Paid Surrogacy Arrangements.

    Science.gov (United States)

    Wilkinson, Stephen

    2016-05-01

    Many critics have suggested that international paid surrogacy is exploitative. Taking such concerns as its starting point, this article asks: (1) how defensible is the claim that international paid surrogacy is exploitative and what could be done to make it less exploitative? (2) In the light of the answer to (1), how strong is the case for prohibiting it? Exploitation could in principle be dealt with by improving surrogates' pay and conditions. However, doing so may exacerbate problems with consent. Foremost amongst these is the argument that surrogates from economically disadvantaged countries cannot validly consent because their background circumstances are coercive. Several versions of this argument are examined and I conclude that at least one has some merit. The article's overall conclusion is that while ethically there is something to be concerned about, paid surrogacy is in no worse a position than many other exploitative commercial transactions which take place against a backdrop of global inequality and constrained options, such as poorly-paid and dangerous construction work. Hence, there is little reason to single surrogacy out for special condemnation. On a policy level, the case for prohibiting international commercial surrogacy is weak, despite legitimate concerns about consent and background poverty.

  12. Potentially exploitable supercritical geothermal resources in the ductile crust

    Science.gov (United States)

    Watanabe, Noriaki; Numakura, Tatsuya; Sakaguchi, Kiyotoshi; Saishu, Hanae; Okamoto, Atsushi; Ingebritsen, Steven E.; Tsuchiya, Noriyoshi

    2017-01-01

    The hypothesis that the brittle–ductile transition (BDT) drastically reduces permeability implies that potentially exploitable geothermal resources (permeability >10−16 m2) consisting of supercritical water could occur only in rocks with unusually high transition temperatures such as basalt. However, tensile fracturing is possible even in ductile rocks, and some permeability–depth relations proposed for the continental crust show no drastic permeability reduction at the BDT. Here we present experimental results suggesting that the BDT is not the first-order control on rock permeability, and that potentially exploitable resources may occur in rocks with much lower BDT temperatures, such as the granitic rocks that comprise the bulk of the continental crust. We find that permeability behaviour for fractured granite samples at 350–500 °C under effective confining stress is characterized by a transition from a weakly stress-dependent and reversible behaviour to a strongly stress-dependent and irreversible behaviour at a specific, temperature-dependent effective confining stress level. This transition is induced by onset of plastic normal deformation of the fracture surface (elastic–plastic transition) and, importantly, causes no ‘jump’ in the permeability. Empirical equations for this permeability behaviour suggest that potentially exploitable resources exceeding 450 °C may form at depths of 2–6 km even in the nominally ductile crust.

  13. Rethinking exploitation: a process-centered account.

    Science.gov (United States)

    Jansen, Lynn A; Wall, Steven

    2013-12-01

    Exploitation has become an important topic in recent discussions of biomedical and research ethics. This is due in no small measure to the influence of Alan Wertheimer's path-breaking work on the subject. This paper presents some objections to Wertheimer's account of the concept. The objections attempt to show that his account places too much emphasis on outcome-based considerations and too little on process-based considerations. Building on these objections, the paper develops an alternative process-centered account of the concept. This alternative account of exploitation takes as its point of departure the broadly Kantian notion that it is wrong to use another as an instrument for the advancement of one's own ends. It sharpens this slippery notion and adds a number of refinements to it. The paper concludes by arguing that process-centered accounts of exploitation better illuminate the ethical challenges posed by research on human subjects than outcome-centered accounts.

  14. Interfacial Fracture of Nanowire Electrodes of Lithium-Ion Batteries

    Science.gov (United States)

    Hardin, G. R.; Zhang, Y.; Fincher, C. D.; Pharr, M.

    2017-09-01

    Nanowires (NW) have emerged as a promising design for high power-density lithium-ion battery (LIB) electrodes. However, volume changes during cycling can lead to fracture of the NWs. In this paper, we investigate a particularly detrimental form of fracture: interfacial detachment of the NW from the current collector (CC). We perform finite element simulations to calculate the energy release rates of NWs during lithiation as a function of geometric parameters and mechanical properties. The simulations show that the energy release rate of a surface crack decreases as it propagates along the NW/CC interface toward the center of the NW. Moreover, this paper demonstrates that plastic deformation in the NWs drastically reduces stresses and thus crack-driving forces, thereby mitigating interfacial fracture. Overall, the results in this paper provide design guidelines for averting NW/CC interfacial fractures during operation of LIBs.

  15. Exploitation of marine gas hydrates: Benefits and risks (Invited)

    Science.gov (United States)

    Wallmann, K. J.

    2013-12-01

    Vast amounts of natural gas are stored in marine gas hydrates deposited at continental margins. The global inventory of carbon bound as methane in gas hydrates is currently estimated as 1000 × 500 Gt. Large-scale national research projects located mostly in South-East Asia but also in North America and Europe are aiming to exploit these ice-like solids as new unconventional resource of natural gas. Japan, South Korea and other Asian countries are taking the lead because their national waters harbor exploitable gas hydrate deposits which could be developed to reduce the dependency of these nations on costly LGN imports. In 2013, the first successful production test was performed off Japan at water depths of ca. 1000 m demonstrating that natural gas can be released and produced from marine hydrates by lowering the pressure in the sub-seabed hydrate reservoirs. In an alternative approach, CO2 from coal power plans and other industrial sources is used to release natural gas (methane) from hydrates while CO2 is bound and stored in the sub-surface as solid hydrate. These new approaches and technologies are still in an early pre-commercial phase; the costs of field development and gas production exceed the value of natural gas being produced from the slowly dissociating hydrates. However, new technologies are currently under development in the German SUGAR project and elsewhere to reduce costs and enhance gas production rates such that gas hydrates may become commercially exploitable over the coming decade(s). The exploitation of marine gas hydrates may help to reduce CO2 emissions from the fossil fuel sector if the produced natural gas is used to replace coal and/or LNG. Hydrate development could also provide important incentives for carbon capture technologies since CO2 can be used to produce natural gas from hydrates. However, leakage of gas may occur during the production process while slope failure may be induced by the accompanying dissociation/conversion of gas

  16. Influence of silane surface modification of veneer on interfacial adhesion of wood-plastic plywood

    Science.gov (United States)

    Fang, Lu; Chang, Liang; Guo, Wen-jing; Chen, Yongping; Wang, Zheng

    2014-01-01

    In this study, wood-plastic plywood was fabricated with high density polyethylene (HDPE) film and poplar veneer by hot-pressing. To improve the interfacial adhesion between the wood veneer and HDPE film, silane A-171 (vinyltrimethoxysilane) was used to treat the surface of poplar veneer by spraying. The effects of silane agent on the veneer surface properties as well as the physical-mechanical performance of wood-plastic plywood were evaluated. The adsorption of several prehydrolyzed alkoxysilanes onto the veneer surface and the existence of a covalent bonding between the wood veneer and silane agent were confirmed using FTIR, XPS and contact angle. Silane surface treatment resulted in enhancement of shear strength and water resistance. When one layer HDPE film was used as adhesive, it caused 293.2% increase in shear strength, 34.6% and 40.8% reduction in water absorption and thickness swelling, respectively. In addition, the wood failure also increased from 5% to 100% due to the silane modification. Dynamic mechanical analysis (DMA) results showed that treated plywood have higher storage modulus, lower tan δ peak value and lagged temperature for tan δ peak value with respect to untreated plywood. Experimental results of interfacial morphology by SEM further revealed better interaction between silane A-171 treated veneer and HDPE film.

  17. V-ONSET: Introducing turbulent multiphase flow facility focusing on Lagrangian interfacial transfer dynamics

    Science.gov (United States)

    Salibindla, Ashwanth; Masuk, Ashik Ullah Mohammad; Ni, Rui

    2017-11-01

    We have designed and constructed a new vertical water tunnel, V-ONSET, to investigate interfacial mass, momentum and energy transfer between two phases in a Lagrangian frame. This system features an independent control of mean flow and turbulence level. The mean flow opposes the rising/falling velocity of the second phase, ``suspending'' the particles and increasing tracking time in the view area. Strong turbulence is generated by shooting 88 digitally-controlled water jets into the test section. The second phase, either bubbles or oil droplets, can be introduced into the test section through a capillary island. In addition to this flow control system, V-ONSET comes with a 3D two-phase visualization system, consisting of high-speed cameras, two-colored LED system, and in-house Lagrangian particle tracking algorithm. This enables us to acquire the Lagrangian evolution of both phases and the interfacial transfer dynamics in between, paving the way for new closure models for two-phase simulations. Financial support for this project was provided by National Science Foundation under Grant Number: 1653389 and 1705246.

  18. Electric-field-induced interfacial instabilities of a soft elastic membrane confined between viscous layers.

    Science.gov (United States)

    Dey, Mohar; Bandyopadhyay, Dipankar; Sharma, Ashutosh; Qian, Shizhi; Joo, Sang Woo

    2012-10-01

    We explore the electric-field-induced interfacial instabilities of a trilayer composed of a thin elastic film confined between two viscous layers. A linear stability analysis (LSA) is performed to uncover the growth rate and length scale of the different unstable modes. Application of a normal external electric field on such a configuration can deform the two coupled elastic-viscous interfaces either by an in-phase bending or an antiphase squeezing mode. The bending mode has a long-wave nature, and is present even at a vanishingly small destabilizing field. In contrast, the squeezing mode has finite wave-number characteristics and originates only beyond a threshold strength of the electric field. This is in contrast to the instabilities of the viscous films with multiple interfaces where both modes are found to possess long-wave characteristics. The elastic film is unstable by bending mode when the stabilizing forces due to the in-plane curvature and the elastic stiffness are strong and the destabilizing electric field is relatively weak. In comparison, as the electric field increases, a subdominant squeezing mode can also appear beyond a threshold destabilizing field. A dominant squeezing mode is observed when the destabilizing field is significantly strong and the elastic films are relatively softer with lower elastic modulus. In the absence of liquid layers, a free elastic film is also found to be unstable by long-wave bending and finite wave-number squeezing modes. The LSA asymptotically recovers the results obtained by the previous formulations where the membrane bending elasticity is approximately incorporated as a correction term in the normal stress boundary condition. Interestingly, the presence of a very weak stabilizing influence due to a smaller interfacial tension at the elastic-viscous interfaces opens up the possibility of fabricating submicron patterns exploiting the instabilities of a trilayer.

  19. Studying interfacial reactions of cholesterol sulfate in an unsaturated phosphatidylglycerol layer with ozone using field induced droplet ionization mass spectrometry.

    Science.gov (United States)

    Ko, Jae Yoon; Choi, Sun Mi; Rhee, Young Min; Beauchamp, J L; Kim, Hugh I

    2012-01-01

    Field-induced droplet ionization (FIDI) is a recently developed ionization technique that can transfer ions from the surface of microliter droplets to the gas phase intact. The air-liquid interfacial reactions of cholesterol sulfate (CholSO(4)) in a 1-palmitoyl-2-oleoyl-sn-phosphatidylglycerol (POPG) surfactant layer with ozone (O(3)) are investigated using field-induced droplet ionization mass spectrometry (FIDI-MS). Time-resolved studies of interfacial ozonolysis of CholSO(4) reveal that water plays an important role in forming oxygenated products. An epoxide derivative is observed as a major product of CholSO(4) oxidation in the FIDI-MS spectrum after exposure of the droplet to O(3) for 5 s. The abundance of the epoxide product then decreases with continued O(3) exposure as the finite number of water molecules at the air-liquid interface becomes exhausted. Competitive oxidation of CholSO(4) and POPG is observed when they are present together in a lipid surfactant layer at the air-liquid interface. Competitive reactions of CholSO(4) and POPG with O(3) suggest that CholSO(4) is present with POPG as a well-mixed interfacial layer. Compared with CholSO(4) and POPG alone, the overall ozonolysis rates of both CholSO(4) and POPG are reduced in a mixed layer, suggesting the double bonds of both molecules are shielded by additional hydrocarbons from one another. Molecular dynamics simulations of a monolayer comprising POPG and CholSO(4) correlate well with experimental observations and provide a detailed picture of the interactions between CholSO(4), lipids, and water molecules in the interfacial region. © American Society for Mass Spectrometry, 2011

  20. Water

    Science.gov (United States)

    ... environment and your health: Green living Sun Water Health effects of water pollution How to protect yourself from water pollution Air Chemicals Noise Quizzes Links to more information girlshealth glossary girlshealth. ...

  1. Growth, Mortality and Exploitation Rates of Sarotherodon ...

    African Journals Online (AJOL)

    Evans

    ABSTRACT. Sarotherodon melanotheron population of Dominli Lagoon in the Western Region of Ghana was studied for its growth and mortality parameters as well as exploitation rate. The study generally aimed at providing basic information necessary for the assessment and management of the fish stock in the lagoon.

  2. Biodegradation of hydrocarbons exploiting spent substrate from ...

    African Journals Online (AJOL)

    SAM

    2014-08-13

    Aug 13, 2014 ... Biodegradation of hydrocarbons exploiting spent substrate from Pleurotus ostreatus in agricultural soils. A. Mauricio-Gutiérrez1, T. Jiménez-Salgado2, A. Tapia-Hernández2, J. Cavazos-Arroyo1 and. B. Pérez-Armendáriz1*. 1Interdisciplinary Research and Consulting, Autonomus Popular University of State ...

  3. Exploiting a natural auxotrophy for genetic selection.

    Science.gov (United States)

    Ramage, Elizabeth; Gallagher, Larry; Manoil, Colin

    2012-08-01

    We exploited the natural histidine auxotrophy of Francisella species to develop hisD (encodes histidinol dehydrogenase) as a positive selection marker. A shuttle plasmid (pBR103) carrying Escherichia coli hisD and designed for cloning of PCR fragments replicated in both attenuated and highly virulent Francisella strains. During this work, we formulated a simplified defined growth medium for Francisella novicida.

  4. Courseware Design: Exploiting the Colour Micro.

    Science.gov (United States)

    Kidd, Marilyn E.; Holmes, Glyn

    1982-01-01

    Discusses the impact of the presentation of data on the educational effectiveness of computer assisted learning systems, describes some of the existing systems for controlling the display of instructional data on CRTs, and outlines a project undertaken at the University of Western Ontario to exploit the capabilities of microcomputer color…

  5. Child Exploitation: Some Pieces of the Puzzle.

    Science.gov (United States)

    Rohlader, Dorothy

    The report addresses the status in North Carolina and in the nation of child exploitation. Legislative and judicial backgrounds of child pornography and child prostitution are reviewed, and difficulties in obtaining statistical data are noted. Law enforcement issues in pornography are cited, and suggestions for further legislation regarding child…

  6. On the dynamics of exploited fish populations

    National Research Council Canada - National Science Library

    Beverton, R. J. H; Holt, Sidney J

    1993-01-01

    ...-brooding cichlids, and viviparity in many sharks and toothcarps. Moreover, fish are of considerable importance to the survival of the human species in the form of nutritious, delicious and diverse food. Rational exploitation and management of our global stocks of fishes must rely upon a detailed and precise insight of their biology. The...

  7. Exploiting indigenous knowledge in the environmental conservation ...

    African Journals Online (AJOL)

    ... of agriculture and reared livestock (especially goats). Over several years, they developed sustainable and effective exploitation mechanisms of the existing biodiversity resources to satisfy their individual needs and those of their societies in general. Journal of Language, Technology and Entrepreneurship in Africa Vol.

  8. Groundwater exploitation in the Abakaliki metropolis (southeastern ...

    African Journals Online (AJOL)

    aghomotsegin

    Full Length Research Paper. Groundwater exploitation in the Abakaliki metropolis. (southeastern Nigeria): Issues and challenges. O. P. Aghamelu*, H. N. Ezeh and A. I. Obasi. Department of Geology and Exploration Geophysics, Ebonyi State University, P.M.B., 053,. Abakaliki, Ebonyi State, Nigeria. Accepted 24 September ...

  9. The Illegal Exploitation of Natural Resources

    NARCIS (Netherlands)

    Boekhout van Solinge, T.|info:eu-repo/dai/nl/156696207

    2014-01-01

    This essay discusses the involvement of organized crime in natural resource exploitation and trade. This is accomplished by examining case studies from different tropical regions in the world: Africa (Liberia, Sierra Leone, and DR Congo), Southeast Asia (Indonesia), and Latin America (Brazilian

  10. National Center for Missing and Exploited Children

    Science.gov (United States)

    ... Have you experienced the tragedy of a missing child? We're here to help. Learn More >> × KidSmartz New Parent Tips to Help Kids Set Physical Boundaries! Download Resources >> × Subscribe EN SP Blog Media About Us Contact Us Legal T&C Careers Copyright © National Center for Missing & Exploited Children. All ...

  11. Finding All Elementary Circuits Exploiting Transconductance

    NARCIS (Netherlands)

    Klumperink, Eric A.M.; Bruccoleri, F.; Nauta, Bram

    Commonly used elementary circuits like single transistor amplifier stages, the differential pair and current mirror basically exploit the transconductance of transistors. This paper aims at finding ALL elementary transconductance based circuits. For this purpose, all graphs of two-port circuits with

  12. Finding all elementary circuits exploiting transconductance

    NARCIS (Netherlands)

    Klumperink, Eric A.M.; Bruccoleri, F.; Nauta, Bram

    2001-01-01

    Commonly used elementary circuits like single-transistor amplifier stages, the differential pair, and current mirrors basically exploit the transconductance property of transistors. This paper aims at finding all elementary transconductance-based circuits. For this purpose, all graphs of two-port

  13. Dissemination and Exploitation: Project Goals beyond Science

    Science.gov (United States)

    Hamann, Kristin; Reitz, Anja

    2017-04-01

    Dissemination and Exploitation are essential parts of public funded projects. In Horizon 2020 a plan for the exploitation and dissemination of results (PEDR) is a requirement. The plan should contain a clear vision on the objectives of the project in relation to actions for dissemination and potential exploitation of the project results. The actions follow the basic idea to spread the knowledge and results gathered within the project and face the challenge of how to bring the results into potentially relevant policy circle and how they impact the market. The plan follows the purpose to assess the impact of the project and to address various target groups who are interested in the project results. Simply put, dissemination concentrates on the transfer of knowledge and exploitation on the commercialization of the project. Beyond the question of the measurability of project`s impact, strategies within science marketing can serve purposes beyond internal and external communication. Accordingly, project managers are facing the challenge to implement a dissemination and exploitation strategy that ideally supports the identification of all partners with the project and matches the current discourse of the project`s content within the society, politics and economy. A consolidated plan might unite all projects partners under a central idea and supports the identification with the project beyond the individual research questions. Which applications, strategies and methods can be used to bring forward a PEDR that accompanies a project successfully and allows a comprehensive assessment of the project afterwards? Which hurdles might project managers experience in the dissemination process and which tasks should be fulfilled by the project manager?

  14. Trolling may intensify exploitation in crappie fisheries

    Science.gov (United States)

    Meals, K. O.; Dunn, A. W.; Miranda, Leandro E.

    2012-01-01

    In some parts of the USA, anglers targeting crappies Pomoxis spp. are transitioning from mostly stationary angling with a single pole around submerged structures to using multiple poles while drifting with the wind or under power. This shift in fishing methods could result in a change in catch efficiency, possibly increasing exploitation rates to levels that would be of concern to managers. We studied the catch statistics of anglers fishing while trolling with multiple poles (trollers) and those fishing with single poles (polers) in Mississippi reservoirs. Specifically, we tested whether (1) various catch statistics differed between trollers and polers, (2) catch rates of trollers were related to the number of poles fished, and (3) trollers could raise exploitation rates to potentially unsustainable levels. Results showed that participation in the crappie fisheries was about equally split between polers and trollers. In spring, 90% of crappie anglers were polers; in summer, 85% of crappie anglers were trollers. The size of harvested crappies was similar for the two angler groups, but the catch per hour was almost three times higher for trollers than for polers. Catch rates by trollers were directly correlated to the number of poles fished, although the relationship flattened as the number of poles increased. The average harvest rate for one troller fishing with three poles was similar to the harvest rate obtained by one poler. Simulations predicted that at the existing mix of about 50% polers and 50% trollers and with no restrictions on the number of poles used by trollers, exploitation of crappies is about 1.3 times higher than that in a polers-only fishery; under a scenario in which 100% of crappie anglers were trollers, exploitation was forecasted to increase to about 1.7 times the polers-only rate. The efficiency of trolling for crappies should be of concern to fishery managers because crappie fisheries are mostly consumptive and may increase exploitation

  15. Interfacial toughness of bilayer dental ceramics based on a short-bar, chevron-notch test.

    Science.gov (United States)

    Anunmana, Chuchai; Anusavice, Kenneth J; Mecholsky, John J

    2010-02-01

    The objective of this study was to test the null hypothesis that the interfacial toughness of each of two types of bonded core-veneer bilayer ceramics is not significantly different from the apparent fracture toughness of the control monolithic glass veneer. T-shaped short-bars of a lithia-disilicate glass-ceramic core (LC) and yttria-stabilized polycrystalline zirconia core ceramic (ZC) were prepared according to the manufacturer's recommendations. V-shaped notches were prepared by using 25-mum-thick palladium foil, leaving the chevron-notch area exposed, and the bars were veneered with a thermally compatible glass veneer (LC/GV and ZC/GV). Additionally, we also bonded the glass veneer to itself as a control group (GV/GV). Specimens were kept in distilled water for 30 days before testing in tension. Eight glass veneer bars were prepared for the analysis of fracture toughness test using the indentation-strength technique. The mean interfacial toughness of the LC/GV group was 0.69 MPam(1/2) (0.11), and did not significantly differ from that of the GV/GV control group, 0.74 MPam(1/2) (0.17) (p>0.05). However, the difference between the mean interfacial toughness of the ZC/GV group, 0.13 MPam(1/2) (0.07), and the LC/GV and the GV/GV groups was statistically significant (pveneering ceramics are the weakest link in the design of the structure. Since all-ceramic restorations often fail from chipping of veneer layers or crack initiation at the interface, the protective effects of thermal mismatch stresses oral prosthesis design should be investigated. Copyright 2009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  16. Examples of Sentinel-2A Mission Exploitation Results

    Science.gov (United States)

    Koetz, Benjamin; Hoersch, Bianca; Gascon, Ferran; Desnos, Yves-Louis; Seifert, Frank Martin; Paganini, Marc; Ramoino, Fabrizio; Arino, Olivier

    2017-04-01

    The Sentinel-2 Copernicus mission will bring significant breakthrough in the exploitation of space borne optical data. Sentinel-2 time series will transform land cover, agriculture, forestry, in-land water and costal EO applications from mapping to monitoring, from snapshot to time series data analysis, from image-based to pixel-based processing. The 5-days temporal revisiting of the Sentinel-2 satellites, when both units will be operated together, will usher us in a new era for time series analysis at high spatial resolutions (HR) of 10-20 meters. The monitoring of seasonal variations and processes in phenology and hydrology are examples of the many R&D areas to be studied. The mission's large swath and systematic acquisitions will further support unprecedented coverage at the national scale addressing information requirements of national to regional policies. Within ESA programs, such as the Data User Element (DUE), Scientific Exploitation of Operational Missions (SEOM) and Climate Change Initiative (CCI), several R&D activities are preparing the exploitation of the Sentinel-2 mission towards reliable measurements and monitoring of e.g. Essential Climate Variables and indicators for the Sustainable Development Goals. Early Sentinel-2 results will be presented related to a range of applications and scientific domains such as agricultural monitoring at national scale (DUE Sen2Agri), wetland extent and condition over African Ramsar sites (DUE GlobWetland-Africa), land cover mapping for climate change (CCI Land Cover), national land monitoring (Cadaster-Env), forest degradation (DUE ForMoSa), urban mapping (DUE EO4Urban), in-land water quality (DUE SPONGE), map of Mediterranean aquaculture (DUE SMART) and coral reef habitat mapping (SEOM S2-4Sci Coral). The above-mentioned activities are only a few examples from the very active international land imaging community building on the long-term Landsat and Spot heritage and knowledge.

  17. A Novel Thermodynamic Model for Obtaining Solid-Liquid Interfacial Energies

    Science.gov (United States)

    Zhang, Cong; Du, Yong

    2017-12-01

    The modeling of solid-liquid interfacial energies is developed in the present work. The total interfacial energy is separated into chemical and structure contributions, which are estimated by applying reported Gibbs energies, as well as correlated with molar interfacial area and melting temperature of solid phase. The present model is well validated with comprehensive datasets of measured solid-liquid interfacial energies, and it can provide key input parameters for microstructure simulations.

  18. Method for Computing the Anisotropy of the Solid-Liquid Interfacial Free Energy

    Energy Technology Data Exchange (ETDEWEB)

    Hoyt, J. J.; Asta, Mark; Karma, Alain

    2001-06-11

    We present a method to compute accurately the weak anisotropy of the solid-liquid interfacial free energy, a parameter which influences dendritic evolution in materials with atomically rough interfaces. The method is based on monitoring interfacial fluctuations during molecular dynamics simulation and extracting the interfacial stiffness which is an order of magnitude more anisotropic than the interfacial free energy. We present results for pure Ni with interatomic potentials derived from the embedded atom method.

  19. Method for Computing the Anisotropy of the Solid-Liquid Interfacial Free Energy

    Science.gov (United States)

    Hoyt, J. J.; Asta, Mark; Karma, Alain

    2001-06-01

    We present a method to compute accurately the weak anisotropy of the solid-liquid interfacial free energy, a parameter which influences dendritic evolution in materials with atomically rough interfaces. The method is based on monitoring interfacial fluctuations during molecular dynamics simulation and extracting the interfacial stiffness which is an order of magnitude more anisotropic than the interfacial free energy. We present results for pure Ni with interatomic potentials derived from the embedded atom method.

  20. Assessment of resin-dentin interfacial morphology of two ethanol-based universal adhesives: A scanning electron microscopy study

    Science.gov (United States)

    Awad, Mohamed Moustafa

    2017-01-01

    Objective: The objective of this study was to assess the resin-dentin interfacial morphology created by two universal adhesives using scanning electron microscopy (SEM). Materials and Methods: The occlusal surfaces of ten (n = 5) molars were reduced to expose a flat surface of dentin. Two universal adhesives, Scotchbond Universal Adhesive and Tetric N-Bond Universal, were independently applied to air-dried dentin. Light-cured resin-based composite restorative materials were used to incrementally build a composite “buildup.” The specimen was sectioned mesiodistally to expose the resin-dentin interface. The inner surfaces of the specimens were polished. Samples were immersed in hydrochloric acid and then rinsed using distilled water. This was followed by immersion of the samples in 1% sodium hypochlorite solution. Then, samples were thoroughly rinsing with distilled water. Dehydration of samples was performed using ascending concentration of ethyl alcohol. Prepared samples were observed SEM at magnifications ×1500 and x4000. Results: Both universal adhesives could penetrate dentin-forming well-defined resin tags, lateral branches as well as a uniform hybrid layer. Conclusions: Two tested universal adhesives applied in self-etch mode can infiltrate into dentin-producing high-quality interfacial morphology. Similar interfacial morphology may be due to the similarity in composition and application mode. PMID:28729794

  1. Assessment of resin-dentin interfacial morphology of two ethanol-based universal adhesives: A scanning electron microscopy study.

    Science.gov (United States)

    Awad, Mohamed Moustafa

    2017-01-01

    The objective of this study was to assess the resin-dentin interfacial morphology created by two universal adhesives using scanning electron microscopy (SEM). The occlusal surfaces of ten (n = 5) molars were reduced to expose a flat surface of dentin. Two universal adhesives, Scotchbond Universal Adhesive and Tetric N-Bond Universal, were independently applied to air-dried dentin. Light-cured resin-based composite restorative materials were used to incrementally build a composite "buildup." The specimen was sectioned mesiodistally to expose the resin-dentin interface. The inner surfaces of the specimens were polished. Samples were immersed in hydrochloric acid and then rinsed using distilled water. This was followed by immersion of the samples in 1% sodium hypochlorite solution. Then, samples were thoroughly rinsing with distilled water. Dehydration of samples was performed using ascending concentration of ethyl alcohol. Prepared samples were observed SEM at magnifications ×1500 and x4000. Both universal adhesives could penetrate dentin-forming well-defined resin tags, lateral branches as well as a uniform hybrid layer. Two tested universal adhesives applied in self-etch mode can infiltrate into dentin-producing high-quality interfacial morphology. Similar interfacial morphology may be due to the similarity in composition and application mode.

  2. Effect of Oxygen Inhibition Layer of Universal Adhesives on Enamel Bond Fatigue Durability and Interfacial Characteristics With Different Etching Modes.

    Science.gov (United States)

    Ouchi, H; Tsujimoto, A; Nojiri, K; Hirai, K; Takamizawa, T; Barkmeier, W W; Latta, M A; Miyazaki, M

    The purpose of this study was to evaluate the effect of the oxygen inhibition layer of universal adhesive on enamel bond fatigue durability and interfacial characteristics with different etching modes. The three universal adhesives used were Scotchbond Universal Adhesive (3M ESPE, St Paul, MN, USA), Adhese Universal (Ivoclar Vivadent, Schaan, Lichtenstein), and G-Premio Bond (GC, Tokyo, Japan). The initial shear bond strength and shear fatigue strength to enamel was determined in the presence and absence of the oxygen inhibition layer, with and without phosphoric acid pre-etching. The water contact angle was also measured in all groups using the sessile drop method. The enamel bonding specimens with an oxygen inhibition layer showed significantly higher (padhesive type and etching mode. Moreover, the water contact angles on the specimens with an oxygen inhibition layer were significantly lower (puniversal adhesives significantly increases the enamel bond fatigue durability and greatly changes interfacial characteristics, suggesting that the bond fatigue durability and interfacial characteristics of these adhesives strongly rely on its presence.

  3. Activation of interfacial enzymes at membrane surfaces

    DEFF Research Database (Denmark)

    Mouritsen, Ole G.; Andresen, Thomas Lars; Halperin, Avi

    2006-01-01

    A host of water-soluble enzymes are active at membrane surfaces and in association with membranes. Some of these enzymes are involved in signalling and in modification and remodelling of the membranes. A special class of enzymes, the phospholipases, and in particular secretory phospholipase A2 (s...

  4. Visualization and characterization of interfacial polymerization layer formation

    NARCIS (Netherlands)

    Zhang, Yali; Benes, Nieck Edwin; Lammertink, Rob G.H.

    2015-01-01

    We present a microfluidic platform to visualize the formation of free-standing films by interfacial polymerization. A microfluidic device is fabricated, with an array of micropillars to stabilize an aqueous–organic interface that allows a direct observation of the films formation process via optical

  5. Liquid metal actuation by electrical control of interfacial tension

    Science.gov (United States)

    Eaker, Collin B.; Dickey, Michael D.

    2016-09-01

    By combining metallic electrical conductivity with low viscosity, liquid metals and liquid metal alloys offer new and exciting opportunities to serve as reconfigurable components of electronic, microfluidic, and electromagnetic devices. Here, we review the physics and applications of techniques that utilize voltage to manipulate the interfacial tension of liquid metals; such techniques include electrocapillarity, continuous electrowetting, electrowetting-on-dielectric, and electrochemistry. These techniques lower the interfacial tension between liquid metals and a surrounding electrolyte by driving charged species (or in the case of electrochemistry, chemical species) to the interface. The techniques are useful for manipulating and actuating liquid metals at sub-mm length scales where interfacial forces dominate. We focus on metals and alloys that are liquid near or below room temperature (mercury, gallium, and gallium-based alloys). The review includes discussion of mercury—despite its toxicity—because it has been utilized in numerous applications and it offers a way of introducing several phenomena without the complications associated with the oxide layer that forms on gallium and its alloys. The review focuses on the advantages, applications, opportunities, challenges, and limitations of utilizing voltage to control interfacial tension as a method to manipulate liquid metals.

  6. Liquid-liquid interfacial tension of electrolyte solutions

    NARCIS (Netherlands)

    Bier, Markus; Zwanikken, J.W.; van Roij, R.H.H.G.

    2008-01-01

    It is theoretically shown that the excess liquid-liquid interfacial tension between two electrolyte solutions as a function of the ionic strength I behaves asymptotically as (-) for small I and as (±I) for large I. The former regime is dominated by the electrostatic potential due to an unequal

  7. Measurement of surface and interfacial tension using pendant drop tensiometry.

    Science.gov (United States)

    Berry, Joseph D; Neeson, Michael J; Dagastine, Raymond R; Chan, Derek Y C; Tabor, Rico F

    2015-09-15

    Pendant drop tensiometry offers a simple and elegant solution to determining surface and interfacial tension - a central parameter in many colloidal systems including emulsions, foams and wetting phenomena. The technique involves the acquisition of a silhouette of an axisymmetric fluid droplet, and iterative fitting of the Young-Laplace equation that balances gravitational deformation of the drop with the restorative interfacial tension. Since the advent of high-quality digital cameras and desktop computers, this process has been automated with high speed and precision. However, despite its beguiling simplicity, there are complications and limitations that accompany pendant drop tensiometry connected with both Bond number (the balance between interfacial tension and gravitational forces) and drop volume. Here, we discuss the process involved with going from a captured experimental image to a fitted interfacial tension value, highlighting pertinent features and limitations along the way. We introduce a new parameter, the Worthington number, Wo, to characterise the measurement precision. A fully functional, open-source acquisition and fitting software is provided to enable the reader to test and develop the technique further. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

  8. Phase transitions, interfacial fluctuations and hidden symmetries for ...

    Indian Academy of Sciences (India)

    Universidad de Sevilla, Apartado de Correos 1065, 41080 Sevilla, Spain. E-mail: a.o.parry@ic.ac.uk. Abstract. Fluids adsorbed at micro-patterned and geometrically structured substrates can exhibit novel phase transitions and interfacial fluctuation effects distinct from those characteristic of wetting at planar, homogeneous ...

  9. Limiting amplitudes of fully nonlinear interfacial tides and solitons

    NARCIS (Netherlands)

    Aguiar-González, B.; Gerkema, T.

    2016-01-01

    A new two-fluid layer model consisting of forcedrotation-modified Boussinesq equations is derived for studyingtidally generated fully nonlinear, weakly nonhydrostaticdispersive interfacial waves. This set is a generalization ofthe Choi–Camassa equations, extended here with forcingterms and Coriolis

  10. A comparative study regarding effects of interfacial ferroelectric ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 37; Issue 2. A comparative study regarding effects of interfacial ferroelectric Bi4Ti3O12 (BTO) layer on electrical characteristics of Au/-Si structures. M Yildirim M Gökçen. Electronic Supplementary Material Volume 37 Issue 2 April 2014 pp 257-262 ...

  11. Summer Research Institute Interfacial and Condensed Phase Chemical Physics

    Energy Technology Data Exchange (ETDEWEB)

    Barlow, Stephan E.

    2004-10-01

    Pacific Northwest National Laboratory (PNNL) hosted its first annual Summer Research Institute in Interfacial and Condensed Phase Chemical Physics from May through September 2004. During this period, fourteen PNNL scientists hosted sixteen young scientists from eleven different universities. Of the sixteen participants, fourteen were graduate students; one was transitioning to graduate school; and one was a university faculty member.

  12. Interfacial properties of immiscible Co-Cu alloys

    DEFF Research Database (Denmark)

    Egry, I.; Ratke, L.; Kolbe, M.

    2010-01-01

    Using electromagnetic levitation under microgravity conditions, the interfacial properties of an Cu75Co25 alloy have been investigated in the liquid phase. This alloy exhibits a metastable liquid miscibility gap and can be prepared and levitated in a configuration consisting of a liquid cobalt-ri...... experiment carried out on board the TEXUS 44 sounding rocket....

  13. Measurement of Interfacial Area Production and Permeability within Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Crandall, Dustin; Ahmadi, Goodarz; Smith, Duane H.

    2010-01-01

    An understanding of the pore-level interactions that affect multi-phase flow in porous media is important in many subsurface engineering applications, including enhanced oil recovery, remediation of dense non-aqueous liquid contaminated sites, and geologic CO2 sequestration. Standard models of two-phase flow in porous media have been shown to have several shortcomings, which might partially be overcome using a recently developed model based on thermodynamic principles that includes interfacial area as an additional parameter. A few static experimental studies have been previously performed, which allowed the determination of static parameters of the model, but no information exists concerning the interfacial area dynamic parameters. A new experimental porous flow cell that was constructed using stereolithography for two-phase gas-liquid flow studies was used in conjunction with an in-house analysis code to provide information on dynamic evolution of both fluid phases and gas-liquid interfaces. In this paper, we give a brief introduction to the new generalized model of two-phase flow model and describe how the stereolithography flow cell experimental setup was used to obtain the dynamic parameters for the interfacial area numerical model. In particular, the methods used to determine the interfacial area permeability and production terms are shown.

  14. Interfacial shear behavior of composite flanged concrete beams

    Directory of Open Access Journals (Sweden)

    Moataz Awry Mahmoud

    2014-08-01

    Full Text Available Composite concrete decks are commonly used in the construction of highway bridges due to their rapid constructability. The interfacial shear transfer between the top slab and the supporting beams is of great significance to the overall deck load carrying capacity and performance. Interfacial shear capacity is directly influenced by the distribution and the percentage of shear connectors. Research and design guidelines suggest the use of two different approaches to quantify the required interfacial shear strength, namely based on the maximum compressive forces in the flange at mid span or the maximum shear flow at the supports. This paper investigates the performance of flanged reinforced concrete composite beams with different shear connector’s distribution and reinforcing ratios. The study incorporated both experimental and analytical programs for beams. Key experimental findings suggest that concentrating the connectors at the vicinity of the supports enhances the ductility of the beam. The paper proposes a simple and straight forward approach to estimate the interfacial shear capacity that was proven to give good correlation with the experimental results and selected code provisions. The paper presents a method to predict the horizontal shear force between precast beams and cast in-situ slabs.

  15. High performance CNT point emitter with graphene interfacial layer.

    Science.gov (United States)

    Lee, Jeong Seok; Kim, Taewoo; Kim, Seul-Gi; Cho, Myung Rae; Seo, Dong Kyun; Lee, Minwoo; Kim, Seontae; Kim, Dae Weon; Park, Gun-Sik; Jeong, Dae Hong; Park, Yun Daniel; Yoo, Ji-Beom; Kang, Tae June; Kim, Yong Hyup

    2014-11-14

    Carbon nanotubes (CNTs) have great potential in the development of high-power electron beam sources. However, for such a high-performance electronic device, the electric and thermal contact problem between the metal and CNTs must be improved. Here, we report graphene as an interfacial layer between the metal and CNTs to improve the interfacial contact. The interfacial graphene layer results in a dramatic decrease of the electrical contact resistance by an order of 2 and an increase of the interfacial thermal conductivity by 16%. Such a high improvement in the electrical and thermal interface leads to superior field emission performance with a very low turn-on field of 1.49 V μm(-1) at 10 μA cm(-2) and a threshold field of 2.00 V μm(-1) at 10 mA cm(-2), as well as the maximum current of 16 mA (current density of 2300 A cm(-2)).

  16. Interfacial stresses in strengthened beam with shear cohesive zone ...

    Indian Academy of Sciences (India)

    The results of parametric study are compared with those of Smith and Teng. They confirm the accuracy of the proposed approach in predicting both interfacial shear and normal stresses. Author Affiliations. Zergua Abdesselam1. Department of Civil Engineering, University of Constantine 1, Constantine, Algeria. Dates.

  17. Interfacial microstructure and strength of diffusion brazed joint ...

    Indian Academy of Sciences (India)

    TECS

    Abstract. Joining of composite, Al2O3–TiC, with heat-resistant 9Cr1MoV steel, was carried out by diffusion brazing technology, using a combination of Ti, Cu and Ti as multi-interlayer. The interfacial strength was measured by shear testing and the result was explained by the fracture morphology. Microstructural charac-.

  18. Undergraduate Laboratory Experiment Modules for Probing Gold Nanoparticle Interfacial Phenomena

    Science.gov (United States)

    Karunanayake, Akila G.; Gunatilake, Sameera R.; Ameer, Fathima S.; Gadogbe, Manuel; Smith, Laura; Mlsna, Deb; Zhang, Dongmao

    2015-01-01

    Three gold-nanoparticle (AuNP) undergraduate experiment modules that are focused on nanoparticles interfacial phenomena have been developed. Modules 1 and 2 explore the synthesis and characterization of AuNPs of different sizes but with the same total gold mass. These experiments enable students to determine how particle size affects the AuNP…

  19. Perturbation theory for solid-liquid interfacial free energies

    Energy Technology Data Exchange (ETDEWEB)

    Warshavsky, Vadim B; Song Xueyu, E-mail: xsong@iastate.ed [Ames Laboratory and Department of Chemistry, Iowa State University, Ames, IA 50011 (United States)

    2010-09-15

    A perturbation theory is developed to calculate solid-liquid interfacial free energies, including anisotropy. The method is applied to systems with inverse-power and Lennard-Jones pair potentials as well as to metal systems with embedded-atom model potentials. The results are in reasonable agreement with the corresponding ones obtained from molecular dynamics simulations.

  20. Impact of Interfacial Layers in Perovskite Solar Cells.

    Science.gov (United States)

    Cho, An-Na; Park, Nam-Gyu

    2017-10-09

    Perovskite solar cells (PCSs) are composed of organic-inorganic lead halide perovskite as the light harvester. Since the first report on a long-term-durable, 9.7 % efficient, solid-state perovskite solar cell, organic-inorganic halide perovskites have received considerable attention because of their excellent optoelectronic properties. As a result, a power conversion efficiency (PCE) exceeding 22 % was certified. Controlling the grain size, grain boundary, morphology, and defects of the perovskite layer is important for achieving high efficiency. In addition, interfacial engineering is equally or more important to further improve the PCE through better charge collection and a reduction in charge recombination. In this Review, the type of interfacial layers and their impact on photovoltaic performance are investigated for both the normal and the inverted cell architectures. Four different interfaces of fluorine-doped tin oxide (FTO)/electron-transport layer (ETL), ETL/perovskite, perovskite/hole-transport layer (HTL), and HTL/metal are classified, and their roles are investigated. The effects of interfacial engineering with organic or inorganic materials on photovoltaic performance are described in detail. Grain-boundary engineering is also included because it is related to interfacial engineering and the grain boundary in the perovskite layer plays an important role in charge conduction, recombination, and chargecarrier life time. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Studies on the disbonding initiation of interfacial cracks.

    Energy Technology Data Exchange (ETDEWEB)

    McAdams, Brian J. (Lehigh University, Bethlehem, PA); Pearson, Raymond A. (Lehigh University, Bethlehem, PA)

    2005-08-01

    With the continuing trend of decreasing feature sizes in flip-chip assemblies, the reliability tolerance to interfacial flaws is also decreasing. Small-scale disbonds will become more of a concern, pointing to the need for a better understanding of the initiation stage of interfacial delamination. With most accepted adhesion metric methodologies tailored to predict failure under the prior existence of a disbond, the study of the initiation phenomenon is open to development and standardization of new testing procedures. Traditional fracture mechanics approaches are not suitable, as the mathematics assume failure to originate at a disbond or crack tip. Disbond initiation is believed to first occur at free edges and corners, which act as high stress concentration sites and exhibit singular stresses similar to a crack tip, though less severe in intensity. As such, a 'fracture mechanics-like' approach may be employed which defines a material parameter--a critical stress intensity factor (K{sub c})--that can be used to predict when initiation of a disbond at an interface will occur. The factors affecting the adhesion of underfill/polyimide interfaces relevant to flip-chip assemblies were investigated in this study. The study consisted of two distinct parts: a comparison of the initiation and propagation phenomena and a comparison of the relationship between sub-critical and critical initiation of interfacial failure. The initiation of underfill interfacial failure was studied by characterizing failure at a free-edge with a critical stress intensity factor. In comparison with the interfacial fracture toughness testing, it was shown that a good correlation exists between the initiation and propagation of interfacial failures. Such a correlation justifies the continuing use of fracture mechanics to predict the reliability of flip-chip packages. The second aspect of the research involved fatigue testing of tensile butt joint specimens to determine lifetimes at sub

  2. Exploiting for medical and biological applications

    Science.gov (United States)

    Giano, Michael C.

    Biotherapeutics are an emerging class of drug composed of molecules ranging in sizes from peptides to large proteins. Due to their poor stability and mucosal membrane permeability, biotherapeutics are administered by a parenteral method (i.e., syringe, intravenous or intramuscular). Therapeutics delivered systemically often experience short half-lives. While, local administration may involve invasive surgical procedures and suffer from poor retention at the site of application. To compensate, the patient receives frequent doses of highly concentrated therapeutic. Unfortunately, the off-target side effects and discomfort associated with multiple injections results in poor patient compliance. Therefore, new delivery methods which can improve therapeutic retention, reduce the frequency of administration and may aid in decreasing the off-target side effects is a necessity. Hydrogels are a class of biomaterials that are gaining interests for tissue engineering and drug delivery applications. Hydrogel materials are defined as porous, 3-dimensional networks that are primarily composed of water. Generally, they are mechanically rigid, cytocompatible and easily chemically functionalized. Collectively, these properties make hydrogels fantastic candidates to perform as drug delivery depots. Current hydrogel delivery systems physically entrap the target therapeutic which is then subsequently released over time at the site of administration. The swelling and degradation of the material effect the diffusion of the therapy from the hydrogel, and therefore should be controlled. Although these strategies provide some regulation over therapeutic release, full control of the delivery is not achieved. Newer approaches are focused on designing hydrogels that exploit known interactions, covalently attach the therapy or respond to an external stimulus in an effort to gain improved control over the therapy's release. Unfortunately, the biotherapeutic is typically required to be chemically

  3. Exploiting host immunity: the Salmonella paradigm

    Science.gov (United States)

    Behnsen, Judith; Perez-Lopez, Araceli; Nuccio, Sean-Paul; Raffatellu, Manuela

    2014-01-01

    Pathogens have evolved clever strategies to evade and in some cases exploit the attacks of an activated immune system. Salmonella enterica is one such pathogen, exploiting multiple aspects of host defense to promote its replication in the host. Here we review recent findings on the mechanisms by which Salmonella establishes systemic and chronic infection, including strategies involving manipulation of innate immune signaling and inflammatory forms of cell death, as well as immune evasion by establishing residency in M2 macrophages. We also examine recent evidence showing that the oxidative environment and the high levels of antimicrobial proteins produced in response to localized Salmonella gastrointestinal infection enable the pathogen to successfully outcompete the resident gut microbiota. PMID:25582038

  4. Organizational Factors for Exploration and Exploitation

    Directory of Open Access Journals (Sweden)

    Sharadindu Pandey

    2009-05-01

    Full Text Available The Purpose of the paper is to develop a conceptual framework which suggests a relationship between organisational factors and exploratory and exploitative innovation types. We searched major databases like ABI/INFORM global, EBSCO, Elsevier’s science direct, Springer link and Emerald full text. Most of studies were included from published sources. We explored the literature of organisational culture, motivational bases of the rewards system and leadership values which are responsible for increasing creative and productive output. Our study has attempted to identify common patterns and themes in the literature regarding the drivers that increase both sides of the organisational creativity. The paper discusses the role of culture, system and styles in the initiation and implementation phases of the innovation called herein exploitative and exploratory innovation.

  5. Tribal children are most exploited - UNICEF.

    Science.gov (United States)

    A workshop sponsored by the UN Children's Fund in the Philippines examined the status of the children of indigenous people and found that exploitation of the assets of indigenous people in the name of development has resulted in social inequalities that have damaged the indigenous children. As examples of the disregard for the human rights of the children, participants cited projects in Davao, Boracay, and Benguet that have displaced native children. These include mining schemes that have "raped" ancestral lands, large-scale agricultural enterprises, promotion of tourism, and creation of hydroelectric dams. The children rarely benefit at all from any of these projects as their families are moved from a position of isolated independence to one of exploited dependence. Social changes accompanying development ruin traditional culture without providing a better or even similar basis of existence.

  6. Sustainable exploitation and management of aquatic resources

    DEFF Research Database (Denmark)

    Neuenfeldt, Stefan; Köster, Fritz

    2014-01-01

    DTU Aqua conducts research, provides advice,educates at university level and contributes toinnovation in sustainable exploitation andmanagement of aquatic resources. The vision of DTUAqua is to enable ecologically and economicallysustainable exploitation of aquatic resourcesapplying an integrated...... ecosystem approach whichutilizes synergies in natural and technical sciencedisciplines. DTU Aqua advises the Danish Ministry ofFood, Agriculture and Fisheries and other publicauthorities, the commercial fisheries, theaquaculture industry and international commissions.DTU Aqua deals with all types ofaquatic...... in the ocean and how these factors impact the living conditions formarine organisms. Population genetics aims at gaining knowledge on how to preserve and managebiodiversity sustainably. Individual biology deals with the biology of aquatic organisms and theirinteraction with other organisms...

  7. Automatic exploitation system for photographic dosemeters; Systeme d`exploitation automatique des dosimetres photographiques

    Energy Technology Data Exchange (ETDEWEB)

    Magri, Y.; Devillard, D.; Godefroit, J.L.; Barillet, C.

    1997-01-01

    The Laboratory of Dosimetry Exploitation (LED) has realized an equipment allowing to exploit automatically photographic film dosemeters. This system uses an identification of the films by code-bars and gives the doses measurement with a completely automatic reader. The principle consists in putting in ribbon the emulsions to be exploited and to develop them in a circulation machine. The measurement of the blackening film is realized on a reading plate having fourteen points of reading, in which are circulating the emulsions in ribbon. The exploitation is made with the usual dose calculation method, with special computers codes. A comparison on 2000 dosemeters has shown that the results are the same in manual and automatical methods. This system has been operating since July 1995 by the LED. (N.C.).

  8. Water

    Science.gov (United States)

    Leopold, Luna Bergere; Baldwin, Helene L.

    1962-01-01

    What do you use water for?If someone asked you this question you would probably think right away of water for drinking. Then you would think of water for bathing, brushing teeth, flushing the toilet. Your list would get longer as you thought of water for cooking, washing the dishes, running the garbage grinder. Water for lawn watering, for play pools, for swimming pools, for washing the car and the dog. Water for washing machines and for air conditioning. You can hardly do without water for fun and pleasure—water for swimming, boating, fishing, water-skiing, and skin diving. In school or the public library, you need water to wash your hands, or to have a drink. If your home or school bursts into flames, quantities of water are needed to put it out.In fact, life to Americans is unthinkable without large supplies of fresh, clean water. If you give the matter a little thought, you will realize that people in many countries, even in our own, may suffer from disease and dirt simply because their homes are not equipped with running water. Imagine your own town if for some reason - an explosion, perhaps - water service were cut off for a week or several weeks. You would have to drive or walk to a neighboring town and bring water back in pails. Certainly if people had to carry water themselves they might not be inclined to bathe very often; washing clothes would be a real chore.Nothing can live without water. The earth is covered by water over three-fourths of its surface - water as a liquid in rivers, lakes and oceans, and water as ice and snow on the tops of high mountains and in the polar regions. Only one-quarter of our bodies is bone and muscle; the other three-fourths is made of water. We need water to live, and so do plants and animals. People and animals can live a long time without food, but without water they die in a few days. Without water, everything would die, and the world would turn into a huge desert.

  9. Macropinocytosis Exploitation by Cancers and Cancer Therapeutics

    Directory of Open Access Journals (Sweden)

    Kevin D Ha

    2016-09-01

    Full Text Available Macropinocytosis has long been known as a primary method for cellular intake of fluid-phase and membrane-bound bulk cargo. This review seeks to re-examine the latest studies to emphasize how cancers exploit macropinocytosis to further their tumorigenesis, including details in how macropinocytosis can be adapted to serve diverse functions. Furthermore, this review will also cover the latest endeavors in targeting macropinocytosis as an avenue for novel therapeutics.

  10. Macropinocytosis Exploitation by Cancers and Cancer Therapeutics.

    Science.gov (United States)

    Ha, Kevin D; Bidlingmaier, Scott M; Liu, Bin

    2016-01-01

    Macropinocytosis has long been known as a primary method for cellular intake of fluid-phase and membrane-bound bulk cargo. This review seeks to re-examine the latest studies to emphasize how cancers exploit macropinocytosis to further their tumorigenesis, including details in how macropinocytosis can be adapted to serve diverse functions. Furthermore, this review will also cover the latest endeavors in targeting macropinocytosis as an avenue for novel therapeutics.

  11. Macropinocytosis Exploitation by Cancers and Cancer Therapeutics

    OpenAIRE

    Ha, Kevin D.; Bidlingmaier, Scott M.; Liu, Bin

    2016-01-01

    Macropinocytosis has long been known as a primary method for cellular intake of fluid-phase and membrane-bound bulk cargo. This review seeks to re-examine the latest studies to emphasize how cancers exploit macropinocytosis to further their tumorigenesis, including details in how macropinocytosis can be adapted to serve diverse functions. Furthermore, this review will also cover the latest endeavors in targeting macropinocytosis as an avenue for novel therapeutics.

  12. Flare Systems Exploitation and Impact on Permafrost

    Science.gov (United States)

    Filimonov, M. Yu; Vaganova, N. A.

    2017-09-01

    Mathematical models and numerical algorithms of horizontal and vertical flare systems exploitation in northern oil and gas fields located in permafrost zone are developed. Computations of long-term forecasts of permafrost degradation around such constructions have been carried out for various types of operation, including emergency situations, which cause a short-term increase in the heat flow near the ground surface, which leads to an additional soil temperature increasing.

  13. Interfacial Chemistry of Moisture-Aged Class II Composite Restorations

    Science.gov (United States)

    Spencer, Paulette; Wang, Yong; Bohaty, Brenda

    2007-01-01

    Under in vivo conditions, the adhesive/dentin bond at the gingival margin of class II composite restorations can be the first defense against substances that may penetrate and ultimately undermine the composite restoration. Deterioration of this bond during aqueous aging is an area of intense investigation, but to date, the majority of our techniques have provided only an indirect assessment of the degrading components. The purpose of this study was to analyze the in situ molecular structure of adhesive/dentin interfaces in class II composite restorations, following aging in aqueous solutions. Class II preparations were cut from 12 unerupted human third molars, with a water-cooled, high-speed, dental handpiece. The prepared teeth were randomly selected for restoration with single bond (SB) and Z100 (3M). Teeth were restored, as per the manufacturer’s directions, under environmental conditions that simulated humidity and temperature characteristics of the oral cavity. Restored teeth were kept in sterile Delbecco’s phosphate saline for 48 h or 90 days. The samples were sectioned occlusogingivally and micro-Raman spectra were acquired at ~1.5 μm spatial resolution across the composite/adhesive/dentin interfaces at the gingival margins. Samples were wet throughout spectral acquisition. The relative intensity of bands associated with the adhesive in the interfacial region decreased dramatically after aqueous storage. This decrease in concert with the similar depth of dentin demineralization provides direct spectroscopic evidence of leaching of adhesive monomer from the interface during the 90 days of storage. SB adhesive infiltrated 4 –5 μm of 12-μm demineralized dentin at the gingival margin. After 90 days of aqueous storage, SB adhesive infiltration was reduced to ~2 μm, leaving ~10 μm of demineralized dentin collagen exposed at the gingival margin. The unprotected collagen at the gingival margin of the aged class II composite restorations was disorganized

  14. Determination of interfacial roughness using X-ray scattering

    Energy Technology Data Exchange (ETDEWEB)

    Munkholm, Anneli [Stanford Univ., CA (United States)

    1997-05-01

    Crystal truncation rod (CTR) scattering is shown to be a powerful technique for determining interfacial roughness non-destructively. By measuring the decay of scattering away from a Bragg reflection in the surface direction an rms roughness of the surface or interface can be extracted. The authors obtain rms roughness values with an accuracy of ± 0.1 Å. Sensitivity to lateral length scale roughness ranges from the wavelength of the x-rays to between 1,000--10,000 Å depending on the instrument function and the specific truncation rod. The influence of different cleans, as well as the thermal oxidation process, on the Si-SiO2 interface is investigated. A hot water treatment prior to the thermal oxidation is shown to roughen the Si-SiO2 interface. CTR scattering results also show a smoothing of the interface as a result of the oxidation process even for as little as 60 Å of thermal oxidation. Comparison between AFM and CTR scattering gives a consistent picture of the relative roughness of the wafers, although the absolute numbers do not agree. The differences in the absolute values can be explained by the lateral roughness scale that the two techniques measure, indicating that it is at periodicities below ~ 100 Å that the increased roughness observed by the x-ray is found. Crystal truncation rods are shown to be perpendicular to the surface and not along the crystallographic axes of a miscut crystal. It is shown that for a crystal terminated by a regular step array both an atomistic and a continuum description of CTR scattering give identical results. Furthermore, the atomistic approach is used to show that a diamond cubic surface with a miscut is inherently rough. Even for a small miscut the tilt of the CTR with respect to the crystallographic axes results in complications for measuring the rod intensity. The authors present schemes for determining the exact position of the CTR in reciprocal space and for measuring the miscut of a single

  15. Large-eddy simulation of sheared interfacial flow

    Science.gov (United States)

    Reboux, S.; Sagaut, P.; Lakehal, D.

    2006-10-01

    Large-eddy simulations (LES) of a turbulent interfacial gas-liquid flows are described in this paper. The variational multiscale approach (VMS) introduced by Hughes for single-phase flows is systematically assessed against direct numerical simulation (DNS) data obtained at a shear Reynolds number Re⋆=171, and compared to LES results obtained with the Smagorinsky model, modified by a near-interface turbulence decay treatment. The models are incorporated in the same pseudospectral DNS solver built within the boundary fitting method used by Fulgosi et al. for air-water flow. The LES are performed for physical conditions allowing low interface deformations that fall in the range of capillary waves of wave slope ak =0.01. The LES results show that both the modified Smagorinsky model and the VMS are capable to predict the boundary layer structure in the gas side, including the decay process, and to cope with the anisotropy of turbulence in the liquid blockage layer underneath the interface. Higher-order turbulence statistics, including the transfer of energy between the normal stresses is also well predicted by both approaches, but qualitatively the VMS results remain overall better than the modified Smagorinsky model. The study has demonstrated that the key to the prediction of the energy transfer mechanism is in the proper prediction of the fluctuating pressure field, which has been found out of reach of any of the LES methodologies. The superiority of the VMS is demonstrated through the analysis of the subgrid transport and exchange terms in the resolved kinetic energy, where it is indeed shown to be self-adaptive with regard to the eddy viscosity. Although VMS is shown to be sensitive to filter scale partition and model constant, the optimal setting can be easily translated in the interface tracking/finite-volume context, which makes it very useful for practical purposes. An important point is that the VMS approach yields very satisfactory results without the need

  16. Shale Gas Exploration and Exploitation Induced Risks - SHEER

    Science.gov (United States)

    Capuano, Paolo; Orlecka-Sikora, Beata; Lasocki, Stanislaw; Cesca, Simone; Gunning, Andrew; jaroslawsky, Janusz; Garcia-Aristizabal, Alexander; Westwood, Rachel; Gasparini, Paolo

    2017-04-01

    Shale gas operations may affect the quality of air, water and landscapes; furthermore, it can induce seismic activity, with the possible impacts on the surrounding infrastructure. The SHEER project aims at setting up a probabilistic methodology to assess and mitigate the short and the long term environmental risks connected to the exploration and exploitation of shale gas. In particular we are investigating risks associated with groundwater contamination, air pollution and induced seismicity. A shale gas test site located in Poland (Wysin) has been monitored before, during and after the fracking operations with the aim of assessing environmental risks connected with groundwater contamination, air pollution and earthquakes induced by fracking and injection of waste water. The severity of each of these hazards depends strongly on the unexpected enhanced permeability pattern, which may develop as an unwanted by-product of the fracking processes and may become pathway for gas and fluid migration towards underground water reservoirs or the surface. The project is devoted to monitor and understand how far this enhanced permeability pattern develops both in space and time. The considered hazards may be at least partially inter-related as they all depend on this enhanced permeability pattern. Therefore they are being approached from a multi-hazard, multi parameter perspective. We expect to develop methodologies and procedures to track and model fracture evolution around shale gas exploitation sites and a robust statistically based, multi-parameter methodology to assess environmental impacts and risks across the operational lifecycle of shale gas. The developed methodologies are going to be applied and tested on a comprehensive database consisting of seismicity, changes of the quality of ground-waters and air, ground deformations, and operational data collected from the ongoing monitoring episode (Wysin) and past episodes: Lubocino (Poland), Preese Hall (UK), Oklahoma (USA

  17. Electroluminescence and impedance analyses of organic light emitting diodes using anhydride materials as cathode interfacial layers

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Eunkyoung [Department of Physics, Brain Korea 21 Physics Research Division, Institute of Basic Science, Sungkyunkwan University, Suwon, 440-746 (Korea, Republic of); Park, Hyungjun [School of Information and Communication Engineering, Sungkyunkwan University, Suwon, 440-746 (Korea, Republic of); Park, Keunhee; Moon, Mi Ran [Department of Physics, Brain Korea 21 Physics Research Division, Institute of Basic Science, Sungkyunkwan University, Suwon, 440-746 (Korea, Republic of); Sohn, Sunyoung [Korea Basic Science Institute, Dukjin Dong 664-14, Jeonju 561-756 (Korea, Republic of); Jung, Donggeun [Department of Physics, Brain Korea 21 Physics Research Division, Institute of Basic Science, Sungkyunkwan University, Suwon, 440-746 (Korea, Republic of); Yi, Junsin [School of Information and Communication Engineering, Sungkyunkwan University, Suwon, 440-746 (Korea, Republic of); Chae, Heeyeop [Department of Chemical Engineering, Sungkyunkwan University, Suwon, 440-746 (Korea, Republic of); Kim, Hyoungsub, E-mail: hsubkim@skku.ed [School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, 440-746 (Korea, Republic of)

    2009-05-29

    Pyromellitic dianhydride (PMDA) and trimellitic anhydride (TMA) were tried as cathode interfacial layers between tris-(8-hydroxyquinoline) aluminum (Alq{sub 3}) and Al in organic light emitting diodes (OLEDs). Both ultra-thin anhydride cathode interfacial layers improved the electroluminescence characteristics of OLEDs compared to those without any interfacial layer, and the PMDA interfacial layer showed the most significant enhancement of the device performance. According to impedance measurements and equivalent circuit analysis, the PMDA interfacial layer decreased the impedance, probably due to the increase in the injection efficiency of electrons from the Al cathode.

  18. Direct correlation of charge transfer absorption with molecular donor:acceptor interfacial area via photothermal deflection spectroscopy

    KAUST Repository

    Domingo, Ester

    2015-04-09

    We show that the Charge Transfer (CT) absorption signal in bulk-heterojunction (BHJ) solar cell blends, measured by photothermal deflection spectroscopy (PDS), is directly proportional to the density of molecular donor/acceptor interfaces. Since the optical transitions from ground state to the interfacial CT state are weakly allowed at photon energies below the optical gap of both donor and acceptor, we can exploit the use of this sensitive linear absorption spectroscopy for such quantification. Moreover, we determine the absolute molar extinction coefficient of the CT transition for an archetypical polymer-fullerene interface. The latter is ~100 times lower than the extinction coefficient of the donor chromophore involved, allowing us to experimentally estimate the transition dipole moment (0.3 D) and the electronic coupling between ground state and CT state to be on the order of 30 meV.

  19. Adsorption and molecular rearrangement of amphoteric species at oil-water interfaces.

    Science.gov (United States)

    Verruto, Vincent J; Le, Rosemary K; Kilpatrick, Peter K

    2009-10-22

    The formation of stable water-in-petroleum emulsions is a costly challenge when transporting, processing, and refining heavy crude oil and bitumen. The stability of these emulsions is attributed to interfacial films with well-documented viscoelastic properties that are known to vary with concentration, solvent quality, and asphaltene chemistry. In this study, we explore the impact of aqueous phase pH and salinity on the transient interfacial rheological properties of asphaltenic films. Using two chemically unique asphaltenes, interfacial shear rheology revealed an apparent salt-induced retardation of the interfacial consolidation processes that ultimately engender elasticity to the film. For Hondo asphaltenes at pH 7, a linear dependence of this retardation on the Debye parameter (kappa) suggested that shielding of electrostatic attraction was responsible. Further investigation with dynamic oscillating drop tensiometry at pH 3, 7, and 10 illustrated that intralayer repulsive and attractive electrostatic interactions can significantly influence the evolution of the interfacial structure. More specifically, the transient tension and dilatational modulus profiles indicated several interfacial processes were affected by the addition of salt, including (i) interfacial activity and the extent of adsorption, (ii) interfacial rearrangement and consolidation, and (iii) interfacial transport or displacement or both. Furthermore, the observed asphaltene interfacial behavior was consistent with those published for interfacial structure-forming amphoteric proteins, such as lysozyme and beta-casein.

  20. Water

    Science.gov (United States)

    ... the tap as described). 3. In all situations, drink or cook only with water that comes out of the tap cold. Water that comes out of the tap warm or hot can contain much higher levels of lead. Boiling ...

  1. Nonlinear spectroscopic studies of interfacial molecular ordering

    Energy Technology Data Exchange (ETDEWEB)

    Superfine, R.

    1991-07-01

    The second order nonlinear optical processes of second harmonic generation and sum frequency generation are powerful new probes of surfaces. They possess unusual surface sensitivity due to the symmetry properties of the nonlinear susceptibility. In particular, infrared-visible sum frequency generation (SFG) can obtain the vibrational spectrum of sub-monolayer coverages of molecules. In this thesis, we explore the unique information that can be obtained from SFG. We take advantage of the sensitivity of SFG to the conformation of alkane chains to study the interaction between adsorbed liquid crystal molecules and surfactant treated surfaces. The sign of the SFG susceptibility depends on the sign of the molecular polarizability and the orientation, up or down, of the molecule. We experimentally determine the sign of the susceptibility and use it to determine the absolute orientation to obtain the sign of the molecular polarizability and show that this quantity contains important information about the dynamics of molecular charge distributions. Finally, we study the vibrational spectra and the molecular orientation at the pure liquid/vapor interface of methanol and water and present the most detailed evidence yet obtained for the structure of the pure water surface. 32 refs., 4 figs., 2 tabs.

  2. Modelling of the interfacial area concentration in the system code ATHLET

    Energy Technology Data Exchange (ETDEWEB)

    Henrique Austregesilo; Klaus Trambauer [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH Forschungsinstitute, 85748 Garching (Germany)

    2005-07-01

    Full text of publication follows: The thermal-hydraulic computer code ATHLET is being developed by the GRS for best-estimate analyses of plant transients, design basis and beyond design basis accidents in light water reactors. It is based on a detailed physical modelling, including a two-fluid formulation and additional conservation equations for the simulation of boron transport and non-condensable gases. The two-fluid formulation consists of separated conservation equations for each phase, complemented by closure relations to describe the inter-phase exchange of mass, momentum and energy. These closure equations are dependent on the actual flow structure. In ATHLET, flow regimes are currently determined by a selection logic as a function of local void fraction and phase velocities at each time step, assuming fully developed flows. Significant modelling improvement is expected by the simulation of the time evolution of two-phase flow regimes. The first step in this direction was the implementation of an additional field equation based on a transport equation for the interfacial area, assuming spherical particles (bubbles, droplets) and taking into account the finite volume approach applied for spatial discretization in ATHLET. The resulting solution variable is the average interfacial area concentration within a control volume. The source terms of the transport equation include several mechanisms such as the variation of particle volume due to pressure changes and/or heat and mass transfer, particle agglomeration, and particle break-up due to turbulences. In the case of droplets flow, entrainment and deposition are also taken into account. This preliminary model is applicable for vertical, dispersed two-phase flow (i.e. bubbles and droplets flow) and has been verified against numerous small-scaled experiments with air-water and steam-water flows. For void fractions up to 30% (bubbles and/or cap-bubbles) a good agreement has been obtained between calculated

  3. Ultrathin Polyamide Membranes Fabricated from Free-Standing Interfacial Polymerization: Synthesis, Modifications, and Post-treatment

    KAUST Repository

    Cui, Yue

    2016-12-21

    The thin film composite (TFC) membrane synthesized via interfacial polymerization is the workhorse of the prevalent membrane technologies such as nanofiltration (NF), reverse osmosis (RO), forward osmosis (FO), and pressure retarded osmosis (PRO) membranes. The polyamide selective layer usually possesses a high selectivity and permeability, making it the heart of this membrane technology. To further improve and understand its formation, with entirely excluding the effect of substrate, an ultrathin membrane which consists of only the polyamide selective layer has been fabricated via free-standing interfacial polymerization between M-phenylenediamine (MPD) and trimesoyl chloride (TMC) in this study. The influences of monomer concentration on polyamide layer formation is first examined. Different from previous studies which indicated that the variation of MPD concentration might affect the polyamide layer formation even when in excess, the MPD concentration when in excess does not affect membrane properties significantly, while increasing the TMC concentration gradually densifies the polyamide layer and enhances its transport resistance. Adding lithium bromide (LiBr) and sodium dodecyl sulfate (SDS) in MPD solutions is found to facilitate the reaction between the two phases and result in a significant improvement in water permeability. However, a high amount of additives leads to an augmentation in transport resistance. The N,N-dimethylformamide (DMF) treatment on the polyamide membrane shows pronounced improvements on water flux under FO tests and water permeability under RO tests without compromising reverse salt flux and salt rejection because the dense polyamide core stays intact. This study may offer a different perspective on membrane formation and intrinsic properties of the polyamide selective layer and provide useful insights for the development of next-generation TFC membranes.

  4. Strongly nonlinear steepening of long interfacial waves

    Directory of Open Access Journals (Sweden)

    N. Zahibo

    2007-06-01

    Full Text Available The transformation of nonlinear long internal waves in a two-layer fluid is studied in the Boussinesq and rigid-lid approximation. Explicit analytic formulation of the evolution equation in terms of the Riemann invariants allows us to obtain analytical results characterizing strongly nonlinear wave steepening, including the spectral evolution. Effects manifesting the action of high nonlinear corrections of the model are highlighted. It is shown, in particular, that the breaking points on the wave profile may shift from the zero-crossing level. The wave steepening happens in a different way if the density jump is placed near the middle of the water bulk: then the wave deformation is almost symmetrical and two phases appear where the wave breaks.

  5. Weyl node assisted conductivity switch in interfacial phase-change memory with van der Waals interfaces

    Science.gov (United States)

    Kim, Jinwoong; Kim, Jeongwoo; Song, Young-Sun; Wu, Ruqian; Jhi, Seung-Hoon; Kioussis, Nicholas

    2017-12-01

    The interfacial phase-change memory (iPCM) GeTe/Sb 2Te3 , a promising candidate for the next generation nonvolatile random-access memories, exhibits fascinating topological properties. Depending on the atomic-layer-stacking sequence of the GeTe block, the iPCM can be either in the SET (Ge-Te-Ge-Te) or RESET (Te-Ge-Ge-Te) states, where the former exhibits ferroelectric polarization and electrical conductivity two orders of magnitude larger than that of the RESET state. Yet, its microscopic origin remains elusive. Here, we predict the emergence of a Weyl semimetal phase in the SET state induced by the ferroelectric polarization which breaks the crystal inversion symmetry. We show that the giant conductivity enhancement of the SET phase is due to the appearance of gapless Weyl nodes. The Ge-Te- or Sb-Te-terminated surfaces of Weyl semimetal iPCM exhibit surface states with completely distinctive topology, where the former consists solely of Fermi arcs while the latter consists of both closed Fermi surface and open Fermi arcs. The iPCM with van der Waals interfaces offers an ideal platform for exploiting the exotic Weyl properties as well as for future memory device applications.

  6. The environmental impacts of foamed concrete production and exploitation

    Science.gov (United States)

    Namsone, E.; Korjakins, A.; Sahmenko, G.; Sinka, M.

    2017-10-01

    This paper presents a study focusing on the environmental impacts of foamed concrete production and exploitation. CO2 emissions are very important factor for describing durability and sustainability of any building material and its life cycle. The building sector is one of the largest energy-consuming sectors in the world. In this study CO2 emissions are evaluated with regard to three types of energy resources (gas, coal and eco-friendly fuel). The related savings on raw materials are up to 120 t of water per 1000 t of traditionally mixed foamed concrete and up to 350 t of sand per 1000 t of foamed concrete produced with intensive mixing technology. In addition, total reduction of CO2 emissions (up to 60 t per 1000 m3 of material) and total energy saving from introduction of foamed concrete production (depending on the type of fuel) were calculated. In order to analyze the conditions of exploitation, both thermal conductivity and thickness of wall was determined. All obtained and calculated results were compared to those of the commercially produced autoclaved aerated concrete.

  7. Friction mechanisms and interfacial slip at fluid-solid interfaces

    CERN Document Server

    Leger, L

    2003-01-01

    We present series of experiments based on near field laser velocimetry, developed to characterize the friction mechanisms at fluid-solid interfaces. For polymers, entangled polymer melts are sheared against smooth solid surfaces, covered by surface attached polymer chains of the same chemical species, having a controlled surface density. Direct measurements of the interfacial velocity and of the shear force allow identification of the molecular mechanisms of friction. Depending on the value of the inverse of the shear rate experienced by the polymer compared to the reptation time, the transition between a regime of high and a regime of low friction observed when increasing the shear rate can be related to disentanglement or to the extraction of the surface chains from the bulk polymer. Surfaces with adjusted friction properties can thus be designed by choosing chain anchored length and surface density. For simple fluids, the direct measurements of the interfacial velocity show that, contrary to the usual hypo...

  8. Topology-generating interfacial pattern formation during liquid metal dealloying

    Science.gov (United States)

    Geslin, Pierre-Antoine; McCue, Ian; Gaskey, Bernard; Erlebacher, Jonah; Karma, Alain

    2015-11-01

    Liquid metal dealloying has emerged as a novel technique to produce topologically complex nanoporous and nanocomposite structures with ultra-high interfacial area and other unique properties relevant for diverse material applications. This process is empirically known to require the selective dissolution of one element of a multicomponent solid alloy into a liquid metal to obtain desirable structures. However, how structures form is not known. Here we demonstrate, using mesoscale phase-field modelling and experiments, that nano/microstructural pattern formation during dealloying results from the interplay of (i) interfacial spinodal decomposition, forming compositional domain structures enriched in the immiscible element, and (ii) diffusion-coupled growth of the enriched solid phase and the liquid phase into the alloy. We highlight how those two basic mechanisms interact to yield a rich variety of topologically disconnected and connected structures. Moreover, we deduce scaling laws governing microstructural length scales and dealloying kinetics.

  9. Quantification of interfacial segregation by analytical electron microscopy

    CERN Document Server

    Muellejans, H

    2003-01-01

    The quantification of interfacial segregation by spatial difference and one-dimensional profiling is presented in general where special attention is given to the random and systematic uncertainties. The method is demonstrated for an example of Al-Al sub 2 O sub 3 interfaces in a metal-ceramic composite material investigated by energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy in a dedicated scanning transmission electron microscope. The variation of segregation measured at different interfaces by both methods is within the uncertainties, indicating a constant segregation level and interfacial phase formation. The most important random uncertainty is the counting statistics of the impurity signal whereas the specimen thickness introduces systematic uncertainties (via k factor and effective scan width). The latter could be significantly reduced when the specimen thickness is determined explicitly. (orig.)

  10. Exploitation of subsea gas hydrate reservoirs

    Science.gov (United States)

    Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge

    2016-04-01

    Natural gas hydrates are considered to be a potential energy resource in the future. They occur in permafrost areas as well as in subsea sediments and are stable at high pressure and low temperature conditions. According to estimations the amount of carbon bonded in natural gas hydrates worldwide is two times larger than in all known conventional fossil fuels. Besides technical challenges that have to be overcome climate and safety issues have to be considered before a commercial exploitation of such unconventional reservoirs. The potential of producing natural gas from subsea gas hydrate deposits by various means (e.g. depressurization and/or injection of carbon dioxide) is numerically studied in the frame of the German research project »SUGAR«. The basic mechanisms of gas hydrate formation/dissociation and heat and mass transport in porous media are considered and implemented into a numerical model. The physics of the process leads to strong non-linear couplings between hydraulic fluid flow, hydrate dissociation and formation, hydraulic properties of the sediment, partial pressures and seawater solution of components and the thermal budget of the system described by the heat equation. This paper is intended to provide an overview of the recent development regarding the production of natural gas from subsea gas hydrate reservoirs. It aims at giving a broad insight into natural gas hydrates and covering relevant aspects of the exploitation process. It is focused on the thermodynamic principles and technological approaches for the exploitation. The effects occurring during natural gas production within hydrate filled sediment layers are identified and discussed by means of numerical simulation results. The behaviour of relevant process parameters such as pressure, temperature and phase saturations is described and compared for different strategies. The simulations are complemented by calculations for different safety relevant problems.

  11. The role of interfacial lipids in stabilizing membrane protein oligomers.

    Science.gov (United States)

    Gupta, Kallol; Donlan, Joseph A C; Hopper, Jonathan T S; Uzdavinys, Povilas; Landreh, Michael; Struwe, Weston B; Drew, David; Baldwin, Andrew J; Stansfeld, Phillip J; Robinson, Carol V

    2017-01-19

    Oligomerization of membrane proteins in response to lipid binding has a critical role in many cell-signalling pathways but is often difficult to define or predict. Here we report the development of a mass spectrometry platform to determine simultaneously the presence of interfacial lipids and oligomeric stability and to uncover how lipids act as key regulators of membrane-protein association. Evaluation of oligomeric strength for a dataset of 125 α-helical oligomeric membrane proteins reveals an absence of interfacial lipids in the mass spectra of 12 membrane proteins with high oligomeric stability. For the bacterial homologue of the eukaryotic biogenic transporters (LeuT, one of the proteins with the lowest oligomeric stability), we found a precise cohort of lipids within the dimer interface. Delipidation, mutation of lipid-binding sites or expression in cardiolipin-deficient Escherichia coli abrogated dimer formation. Molecular dynamics simulation revealed that cardiolipin acts as a bidentate ligand, bridging across subunits. Subsequently, we show that for the Vibrio splendidus sugar transporter SemiSWEET, another protein with low oligomeric stability, cardiolipin shifts the equilibrium from monomer to functional dimer. We hypothesized that lipids are essential for dimerization of the Na+/H+ antiporter NhaA from E. coli, which has the lowest oligomeric strength, but not for the substantially more stable homologous Thermus thermophilus protein NapA. We found that lipid binding is obligatory for dimerization of NhaA, whereas NapA has adapted to form an interface that is stable without lipids. Overall, by correlating interfacial strength with the presence of interfacial lipids, we provide a rationale for understanding the role of lipids in both transient and stable interactions within a range of α-helical membrane proteins, including G-protein-coupled receptors.

  12. Higher derivative free energy terms and interfacial curvatures

    OpenAIRE

    Mihailescu, M.

    2007-01-01

    High derivative terms do not play a major role in field theories because of the associated complexity and inherent difficulty in connecting these terms to physically measurable quantities. A role for higher derivative terms is analyzed for the case of field theories used to describe phase separated systems. In these theories, higher derivative terms are directly connected to an interfacial free energy which contains the mean and the Gaussian curvature and are shown to determine explicitly the...

  13. Shape Oscillations of Gas Bubbles With Newtonian Interfacial Rheological Properties

    Science.gov (United States)

    Nadim, Ali

    1996-01-01

    The oscillation frequency and damping rate for small-amplitude axisymmetric shape modes of a gas bubble in an ideal liquid are obtained, in the limit when the bubble interface possesses Newtonian interfacial rheology with constant surface shear and dilatational viscosities. Such results permit the latter surface properties to be measured by analyzing experimental data on frequency shift and damping rate of specific shape modes of suspended bubbles in the presence of surfactants.

  14. International Symposium on Interfacial Joining and Surface Technology (IJST2013)

    Science.gov (United States)

    Takahashi, Yasuo

    2014-08-01

    Interfacial joining (bonding) is a widely accepted welding process and one of the environmentally benign technologies used in industrial production. As the bonding temperature is lower than the melting point of the parent materials, melting of the latter is kept to a minimum. The process can be based on diffusion bonding, pressure welding, friction welding, ultrasonic bonding, or brazing-soldering, all of which offer many advantages over fusion welding. In addition, surface technologies such as surface modification, spraying, coating, plating, and thin-film formation are necessary for advanced manufacturing, fabrication, and electronics packaging. Together, interfacial joining and surface technology (IJST) will continue to be used in various industrial fields because IJST is a very significant form of environmentally conscious materials processing. The international symposium of IJST 2013 was held at Icho Kaikan, Osaka University, Japan from 27-29 November, 2013. A total of 138 participants came from around the world to attend 56 oral presentations and 36 posters presented at the symposium, and to discuss the latest research and developments on interfacial joining and surface technologies. This symposium was also held to commemorate the 30th anniversary of the Technical Commission on Interfacial Joining of the Japan Welding Society. On behalf of the chair of the symposium, it is my great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE). Among the presentations, 43 papers are published here, and I believe all of the papers have provided the welding community with much useful information. I would like to thank the authors for their enthusiastic and excellent contributions. Finally, I would like to thank all members of the committees, secretariats, participants, and everyone who contributed to this symposium through their support and invaluable effort for the success of IJST 2013. Yasuo Takahashi Chair of IJST 2013

  15. Multiscale Random-Walk Algorithm for Simulating Interfacial Pattern Formation

    Energy Technology Data Exchange (ETDEWEB)

    Plapp, Mathis; Karma, Alain

    2000-02-21

    We present a novel computational method to simulate accurately a wide range of interfacial patterns whose growth is limited by a large-scale diffusion field. To illustrate the computational power of this method, we demonstrate that it can be used to simulate three-dimensional dendritic growth in a previously unreachable range of low undercoolings that is of direct experimental relevance. (c) 2000 The American Physical Society.

  16. Probing model tumor interfacial properties using piezoelectric cantilevers

    OpenAIRE

    Yegingil, Hakki; Shih, Wan Y.; Shih, Wei-Heng

    2010-01-01

    Invasive malignant breast cancers are typically branchy and benign breast tumors are typically smooth. It is of interest to characterize tumor branchiness (roughness) to differentiate invasive malignant breast cancer from noninvasive ones. In this study, we examined the shear modulus (G) to elastic modulus (E) ratio, G∕E, as a quantity to describe model tumor interfacial roughness using a piezoelectric cantilever capable of measuring both tissue elastic modulus and tissue shear modulus. The p...

  17. Exploiting Redundancy in an OFDM SDR Receiver

    Directory of Open Access Journals (Sweden)

    Tomas Palenik

    2009-01-01

    Full Text Available Common OFDM system contains redundancy necessary to mitigate interblock interference and allows computationally effective single-tap frequency domain equalization in receiver. Assuming the system implements an outer error correcting code and channel state information is available in the receiver, we show that it is possible to understand the cyclic prefix insertion as a weak inner ECC encoding and exploit the introduced redundancy to slightly improve error performance of such a system. In this paper, an easy way to implement modification to an existing SDR OFDM receiver is presented. This modification enables the utilization of prefix redundancy, while preserving full compatibility with existing OFDM-based communication standards.

  18. Art Therapy Exhibitions: Exploitation or Advocacy?

    Science.gov (United States)

    Davis, Terri

    2017-01-01

    Promoting awareness of human trafficking by sharing trauma survivors' art and summaries of their life stories suggests ethical complexities that have been typically neglected by bioethicists. Although these survivors voluntarily share the objects they created during art therapy sessions, they are still at risk of harm, including further exploitation, due to their vulnerability, high rates of victim sensitivity, and the mental health consequences of their traumatic experiences. While some argue that the benefits of sublimation and art therapy for human trafficking survivors make sharing their art worth the risk, anti-trafficking organizations and supporters of such art exhibitions have responsibilities to be trauma informed. © 2017 American Medical Association. All Rights Reserved.

  19. Aphid Heritable Symbiont Exploits Defensive Mutualism.

    Science.gov (United States)

    Doremus, Matthew R; Oliver, Kerry M

    2017-04-15

    Insects and other animals commonly form symbioses with heritable bacteria, which can exert large influences on host biology and ecology. The pea aphid, Acyrthosiphon pisum , is a model for studying effects of infection with heritable facultative symbionts (HFS), and each of its seven common HFS species has been reported to provide resistance to biotic or abiotic stresses. However, one common HFS, called X-type, rarely occurs as a single infection in field populations and instead typically superinfects individual aphids with Hamiltonella defensa , another HFS that protects aphids against attack by parasitic wasps. Using experimental aphid lines comprised of all possible infection combinations in a uniform aphid genotype, we investigated whether the most common strain of X-type provides any of the established benefits associated with aphid HFS as a single infection or superinfection with H. defensa We found that X-type does not confer protection to any tested threats, including parasitoid wasps, fungal pathogens, or thermal stress. Instead, component fitness assays identified large costs associated with X-type infection, costs which were ameliorated in superinfected aphids. Together these findings suggest that X-type exploits the aphid/ H. defensa mutualism and is maintained primarily as a superinfection by "hitchhiking" via the mutualistic benefits provided by another HFS. Exploitative symbionts potentially restrict the functions and distributions of mutualistic symbioses with effects that extend to other community members. IMPORTANCE Maternally transmitted bacterial symbionts are widespread and can have major impacts on the biology of arthropods, including insects of medical and agricultural importance. Given that host fitness and symbiont fitness are tightly linked, inherited symbionts can spread within host populations by providing beneficial services. Many insects, however, are frequently infected with multiple heritable symbiont species, providing potential

  20. Geothermal resources: exploration and exploitation. A bibliography

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    This comprehensive bibliography contains 5476 citations of foreign and domestic research reports, journal articles, patents, conference proceedings, and books concerned with the exploration and exploitation of geothermal resources. The coverage dates back as far as useful references could be obtained and extends through June 1976. References are arranged in broad subject categories and are made up of complete bibliographic citations. These are followed by a listing of subject descriptors used to describe the subject content of each reference. Four indexes are included: Corporate, Personal Author, Subject, and Report Number. Also included is a list of journals from which articles were selected. (LBS)

  1. Wettability controls slow immiscible displacement through local interfacial instabilities

    Science.gov (United States)

    Jung, Michael; Brinkmann, Martin; Seemann, Ralf; Hiller, Thomas; Sanchez de La Lama, Marta; Herminghaus, Stephan

    2016-11-01

    Immiscible fluid displacement with average front velocities in the capillary-dominated regime is studied in a transparent Hele-Shaw cell with cylindrical posts. Employing various combinations of fluids and wall materials allows us to cover a range of advancing contact angles 46∘≤θa≤180∘ of the invading fluid in our experiments. In parallel, we study the displacement process in particle-based simulations that account for wall wettability. Considering the same arrangement of posts in experiments and simulation, we find a consistent crossover between stable interfacial displacement at θa≲80∘ and capillary fingering at high contact angles θa≳120∘ . The position of the crossover is quantified through the evolution of the interface length and the final saturation of the displaced fluid. A statistical analysis of the local displacement processes demonstrates that the shape evolution of the fluid front is governed by local instabilities as proposed by Cieplak and Robbins for a quasistatic interfacial displacement [Cieplak and Robbins, Phys. Rev. Lett. 60, 2042 (1988), 10.1103/PhysRevLett.60.2042]. The regime of stable front advances coincides with a corresponding region of contact angles where cooperative interfacial instabilities prevail. Capillary fingering, however, is observed only for large θa, where noncooperative instabilities dominate the invasion process.

  2. Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives.

    Science.gov (United States)

    Yin, Zhigang; Wei, Jiajun; Zheng, Qingdong

    2016-08-01

    Organic solar cells (OSCs) have shown great promise as low-cost photovoltaic devices for solar energy conversion over the past decade. Interfacial engineering provides a powerful strategy to enhance efficiency and stability of OSCs. With the rapid advances of interface layer materials and active layer materials, power conversion efficiencies (PCEs) of both single-junction and tandem OSCs have exceeded a landmark value of 10%. This review summarizes the latest advances in interfacial layers for single-junction and tandem OSCs. Electron or hole transporting materials, including metal oxides, polymers/small-molecules, metals and metal salts/complexes, carbon-based materials, organic-inorganic hybrids/composites, and other emerging materials, are systemically presented as cathode and anode interface layers for high performance OSCs. Meanwhile, incorporating these electron-transporting and hole-transporting layer materials as building blocks, a variety of interconnecting layers for conventional or inverted tandem OSCs are comprehensively discussed, along with their functions to bridge the difference between adjacent subcells. By analyzing the structure-property relationships of various interfacial materials, the important design rules for such materials towards high efficiency and stable OSCs are highlighted. Finally, we present a brief summary as well as some perspectives to help researchers understand the current challenges and opportunities in this emerging area of research.

  3. Homocomposites of Polylactide (PLA) with Induced Interfacial Stereocomplex Crystallites.

    Science.gov (United States)

    Arias, Veluska; Odelius, Karin; Höglund, Anders; Albertsson, Ann-Christine

    2015-09-08

    The demand for "green" degradable composite materials increases with growing environmental awareness. The key challenge is achieving the preferred physical properties and maintaining their eco-attributes in terms of the degradability of the matrix and the filler. Herein, we have designed a series of "green" homocomposites materials based purely on polylactide (PLA) polymers with different structures. Film-extruded homocomposites were prepared by melt-blending PLA matrixes (which had different degrees of crystallinity) with PLLA and PLA stereocomplex (SC) particles. The PLLA and SC particles were spherical and with 300-500 nm size. Interfacial crystalline structures in the form of stereocomplexes were obtained for certain particulate-homocomposite formulations. These SC crystallites were found at the particle/matrix interface when adding PLLA particles to a PLA matrix with d-lactide units, as confirmed by XRD and DSC data analyses. For all homocomposites, the PLLA and SC particles acted as nucleating agents and enhanced the crystallization of the PLA matrixes. The SC particles were more rigid and had a higher Young's modulus compared with the PLLA particles. The mechanical properties of the homocomposites varied with particle size, rigidity, and the interfacial adhesion between the particles and the matrix. An improved tensile strength in the homocomposites was achieved from the interfacial stereocomplex formation. Hereafter, homocomposites with tunable crystalline arrangements and subsequently physical properties, are promising alternatives in strive for eco-composites and by this, creating materials that are completely degradable and sustainable.

  4. Homocomposites of Polylactide (PLA) with Induced Interfacial Stereocomplex Crystallites

    Science.gov (United States)

    2015-01-01

    The demand for “green” degradable composite materials increases with growing environmental awareness. The key challenge is achieving the preferred physical properties and maintaining their eco-attributes in terms of the degradability of the matrix and the filler. Herein, we have designed a series of “green” homocomposites materials based purely on polylactide (PLA) polymers with different structures. Film-extruded homocomposites were prepared by melt-blending PLA matrixes (which had different degrees of crystallinity) with PLLA and PLA stereocomplex (SC) particles. The PLLA and SC particles were spherical and with 300–500 nm size. Interfacial crystalline structures in the form of stereocomplexes were obtained for certain particulate-homocomposite formulations. These SC crystallites were found at the particle/matrix interface when adding PLLA particles to a PLA matrix with d-lactide units, as confirmed by XRD and DSC data analyses. For all homocomposites, the PLLA and SC particles acted as nucleating agents and enhanced the crystallization of the PLA matrixes. The SC particles were more rigid and had a higher Young’s modulus compared with the PLLA particles. The mechanical properties of the homocomposites varied with particle size, rigidity, and the interfacial adhesion between the particles and the matrix. An improved tensile strength in the homocomposites was achieved from the interfacial stereocomplex formation. Hereafter, homocomposites with tunable crystalline arrangements and subsequently physical properties, are promising alternatives in strive for eco-composites and by this, creating materials that are completely degradable and sustainable. PMID:26523245

  5. Modelling interfacial cracking with non-matching cohesive interface elements

    Science.gov (United States)

    Nguyen, Vinh Phu; Nguyen, Chi Thanh; Bordas, Stéphane; Heidarpour, Amin

    2016-11-01

    Interfacial cracking occurs in many engineering problems such as delamination in composite laminates, matrix/interface debonding in fibre reinforced composites etc. Computational modelling of these interfacial cracks usually employs compatible or matching cohesive interface elements. In this paper, incompatible or non-matching cohesive interface elements are proposed for interfacial fracture mechanics problems. They allow non-matching finite element discretisations of the opposite crack faces thus lifting the constraint on the compatible discretisation of the domains sharing the interface. The formulation is based on a discontinuous Galerkin method and works with both initially elastic and rigid cohesive laws. The proposed formulation has the following advantages compared to classical interface elements: (i) non-matching discretisations of the domains and (ii) no high dummy stiffness. Two and three dimensional quasi-static fracture simulations are conducted to demonstrate the method. Our method not only simplifies the meshing process but also it requires less computational demands, compared with standard interface elements, for problems that involve materials/solids having a large mismatch in stiffnesses.

  6. Polyaniline nanostructures tuning with oxidants in interfacial polymerization system

    Directory of Open Access Journals (Sweden)

    Fanxin Zeng

    2015-10-01

    Full Text Available Three kinds of nanostructured polyanilines (PANIs were prepared through interfacial polymerization by using ammonium persulfate (APS as a single oxidant, and APS/FeCl3, APS/K2Cr2O7 as composite oxidants, respectively. It is observed that faster formation process and higher yield of nanostructured PANIs could be achieved in the presence of FeCl3 and K2Cr2O7. The as-prepared PANIs were characterized by field emission scanning electron microscopy, ultraviolet–visible absorption spectroscopy, Fourier transform infrared and Raman spectroscopy, X-ray diffraction analysis and electrochemical measurements including cyclic voltammetry and galvanostatic charge/discharge measurement. The influence of composite oxidants on the morphology, microstructure, and electrical and electrochemical properties of PANIs was discussed. Interestingly, when APS/K2Cr2O7 was used as the composite oxidants, PANI exhibited petal-like structure with high yield of 57.35% instead of general nanofibrous morphology formed in interfacial polymerization. Compared with those nanofibrous PANIs obtained by using APS as a single oxidant or APS/FeCl3 as composite oxidants, petal-like PANIs exhibited the largest specific capacitance (692.4 F/g at scan rate of 5 mV/s and highest cycle stability among them. It provides a new insight into the control of PANI nanostructures with high yield and energy storage ability by simply selecting suitable composite oxidants in interfacial polymerization.

  7. Recent advances in interfacial engineering of perovskite solar cells

    Science.gov (United States)

    Ye, Meidan; He, Chunfeng; Iocozzia, James; Liu, Xueqin; Cui, Xun; Meng, Xiangtong; Rager, Matthew; Hong, Xiaodan; Liu, Xiangyang; Lin, Zhiqun

    2017-09-01

    Due to recent developments, organometallic halide perovskite solar cells (PSCs) have attracted even greater interest owing to their impressive photovoltaic properties and simple device manufacturing processes with the potential for commercial applications. The power conversion efficiencies (PCEs) of PSCs have surged from 3.8% for methyl ammonium lead halide-sensitized liquid solar cells, CH3NH3PbX3 (X  =  Cl, Br, I), in 2009, to more than 22% for all-solid-state solar cells in 2016. Over the past few years, significant effort has been dedicated to realizing PSCs with even higher performance. In this review, recent advances in the interfacial engineering of PSCs are addressed. The specific strategies for the interfacial engineering of PSCs fall into two categories: (1) solvent treatment and additives to improve the light-harvesting capabilities of perovskite films, and (2) the incorporation of various functional materials at the interfaces between the active layers (e.g. electron transporting layer, perovskite layer, and hole transporting layer). This review aims to provide a comprehensive overview of strategies for the interfacial engineering of PSCs with potential benefits including enhanced light harvesting, improved charge separation and transport, improved device stability, and elimination of photocurrent hysteresis.

  8. Competing Discourses about Youth Sexual Exploitation in Canadian News Media.

    Science.gov (United States)

    Saewyc, Elizabeth M; Miller, Bonnie B; Rivers, Robert; Matthews, Jennifer; Hilario, Carla; Hirakata, Pam

    2013-10-01

    Media holds the power to create, maintain, or break down stigmatizing attitudes, which affect policies, funding, and services. To understand how Canadian news media depicts the commercial sexual exploitation of children and youth, we examined 835 Canadian newspaper articles from 1989-2008 using a mixed methods critical discourse analysis approach, comparing representations to existing research about sexually exploited youth. Despite research evidence that equal rates of boys and girls experience exploitation, Canadian news media depicted exploited youth predominantly as heterosexual girls, and described them alternately as victims or workers in a trade, often both in the same story. News media mentioned exploiters far less often than victims, and portrayed them almost exclusively as male, most often called 'customers' or 'consumers,' and occasionally 'predators'; in contrast, research has documented the majority of sexually exploited boys report female exploiters. Few news stories over the past two decades portrayed the diversity of victims, perpetrators, and venues of exploitation reported in research. The focus on victims but not exploiters helps perpetuate stereotypes of sexual exploitation as business or a 'victimless crime,' maintains the status quo, and blurs responsibility for protecting youth under the UN Convention on the Rights of the Child. Health care providers and researchers can be advocates for accuracy in media coverage about sexual exploitation; news reporters and editors should focus on exploiters more than victims, draw on existing research evidence to avoid perpetuating stereotypes, and use accurate terms, such as commercial sexual exploitation, rather than terms related to business or trade.

  9. Interfacial (o/w) properties of naphthetic acids and metal naphthenates, naphtenic acid characterization and metal naphthenate inhibition

    Energy Technology Data Exchange (ETDEWEB)

    Brandal, Oeystein

    2005-07-01

    Deposition of metal naphthenates in process facilities is becoming a huge problem for petroleum companies producing highly acidic crudes. In this thesis, the main focus has been towards the oil-water (o/w) interfacial properties of naphthenic acids and their ability to react with different divalent cations across the interface to form metal naphthenates. The pendant drop technique was utilized to determine dynamic interfacial tensions (IFT) between model oil containing naphthenic acid, synthetic as well as indigenous acid mixtures, and pH adjusted water upon addition of different divalent cations. Changes in IFT caused by the divalent cations were correlated to reaction mechanisms by considering two reaction steps with subsequent binding of acid monomers to the divalent cation. The results were discussed in light of degree of cation hydration and naphthenic acid conformation, which affect the interfacial conditions and thus the rate of formation of 2:1 complexes of acid and cations. Moreover, addition of non-ionic oil-soluble surfactants used as basis compounds in naphthenate inhibitors was found to hinder a completion of the reaction through interfacial dilution of the acid monomers. Formation and stability of metal naphthenate films at o/w interfaces were studied by means of Langmuir technique with a trough designed for liquid-liquid systems. The effects of different naphthenic acids, divalent cations, and pH of the subphase were investigated. The results were correlated to acid structure, cation hydration, and degree of dissociation, which all affect the film stability against compression. Naphthenic acids acquired from a metal naphthenate deposit were characterized by different spectroscopic techniques. The sample was found to consist of a narrow family of 4-protic naphthenic acids with molecular weights around 1230 g/mol. These acids were found to be very o/w interfacially active compared to normal crude acids, and to form Langmuir monolayers with stability

  10. Exploiting Co-solubilization of Warfarin, Curcumin, and Rhodamine B for Modulation of Energy Transfer: A Micelle FRET On/Off Switch.

    Science.gov (United States)

    Bhat, Parvaiz Ahmad; Chat, Oyais Ahmad; Dar, Aijaz Ahmad

    2016-08-04

    Two new FRET pairs, warfarin (WF)-curcumin (CUR) and curcumin-rhodamine B (RhB), are explored by using surfactant-based self-assembled soft systems as scaffolds. The study is extended to design a two-step concurrent FRET system based on these three fluorophores, which is an important mechanism to devise artificial light-harvesting/antenna systems. Surfactant systems of varying nature (cationic, anionic, nonionic, and zwitterionic) are exploited to modulate the energy transfer in different FRET systems. Interestingly, micelle/water interfacial-charge-responsive FRET is observed owing to selective solubilization of the fluorophores during co-solubilization. The step-one FRET (WF→CUR) is switched on in cationic and zwitterionic media but switched off in anionic/nonionic media, whereas the step-two FRET from CUR to RhB is switched on in anionic/nonionic and zwitterionic media. However, both the FRET steps (WF→CUR→RhB) are observed to be active only in zwitterionic medium. Co-solubilized, appropriately mixed fluorophores having multistep FRET possibilities can be switched on/off selectively as and when required and energy efficiency can be tuned to an optimal level by varying the nature and geometry of the micellar scaffold. Thus, the two FRET pairs selectively acknowledge all types of media for their anticipated applications in biological systems, as structural tools, and for the development of artificial light-harvesting/antenna systems and lasers. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Improved Oil Recovery in Chalk. Spontaneous Imbibition affected by Wettability, Rock Framework and Interfacial Tension

    Energy Technology Data Exchange (ETDEWEB)

    Milter, J.

    1996-12-31

    The author of this doctoral thesis aims to improve the oil recovery from fractured chalk reservoirs, i.e., maximize the area of swept zones and their displacement efficiencies. In order to identify an improved oil recovery method in chalk, it is necessary to study wettability of calcium carbonate and spontaneous imbibition potential. The thesis contains an investigation of thin films and wettability of single calcite surfaces. The results of thin film experiments are used to evaluate spontaneous imbibition experiments in different chalk types. The chalk types were described detailed enough to permit considering the influence of texture, pore size and pore throat size distributions, pore geometry, and surface roughness on wettability and spontaneous imbibition. Finally, impacts of interfacial tension by adding anionic and cationic surfactants to the imbibing water phase are studied at different wettabilities of a well known chalk material. 232 refs., 97 figs., 13 tabs.

  12. Effects of interplay of nanoparticles, surfactants and base fluid on the interfacial tension of nanocolloids

    CERN Document Server

    Harikrishnan, A R; Agnihotri, PK; Gedupudi, Sateesh; Das, Sarit K

    2016-01-01

    A systematically designed study has been conducted to understand and clearly demarcate the degree of contribution by the constituting elements to the surface tension of nanocolloids. The effects of elements such as surfactants, particles and the combined effects of these on the interfacial tension of these complex fluids are studied employing pendant drop shape analysis method by fitting Young Laplace equation. Only particle has shown considerable increase in surface tension with particle concentration in a polar medium like DI water whereas only marginal effect particles on surface tension in weakly polar mediums like glycerol and ethylene glycol. Such behaviour has been attributed to the enhanced desorption of particles to the interface and a mathematical framework has been derived to quantify this. Combined particle and surfactant effect on surface tension of complex nanofluid system showed a decreasing behaviour with respect to the particle and surfactant concentration with a considerably feeble effect of...

  13. Sensitivity Analysis of Interfacial Tension on Saturation and Relative Permeability Model Predictions

    KAUST Repository

    Abdallah, Wael

    2011-05-18

    Interfacial tension (IFT) measurements of Dodecane/brine systems at different concentrations and Dodecane/deionized water subject to different Dodecane purification cycles were taken over extended durations at room temperature and pressure to investigate the impact of aging. When a fresh droplet was formed, a sharp drop in IFT was observed assumed to be a result of intrinsic impurity adsorption at the interface. The subsequent measurements exhibited a prolonged equilibration period consistent with diffusion from the bulk phase to the interface. Our results indicate that minute amounts of impurities present in experimental chemical fluids "used as received" have a drastic impact on the properties of the interface. Initial and equilibrium IFT are shown to be dramatically different, therefore it is important to be cautious of utilizing IFT values in numerical models. The study demonstrates the impact these variations in IFT have on relative permeability relationships by adopting a simple pore network model simulation.

  14. Method for estimating interfacial tensions and contact angles from sessile and pendant drop shapes

    Energy Technology Data Exchange (ETDEWEB)

    Huh, C.; Reed, R.L.

    1983-02-01

    Optimal estimation techniques were developed for measurement of interfacial tensions and contact angles for multiphase microemulsion systems of the following types: (1) lower-phase microemulsion in equilibrium with excess oil, (2) upper-phase microemulsion in equilbrium with excess brine, and (3) middle-phase microemulsion in equilibrium with excess brine and excess oil. The surfactant was the monoethanol amine salt of dodecyl o-xylene sulfonate mixed with a cosolvent of t-amyl alcohol in the ratio 63/67 by vol. The oil was a mixture of 90% paraffinic oil (Isopar M) and 10% heavy aromatic naphtha (by volume), and the brine was various concentrations of NaCl in distilled water. The method is applied to sessile drops, bubbles, and pendant configurations. 21 referernces.

  15. Simulation of the Thermal Hydraulic Processes in the Horizontal Steam Generator with the Use of the Different Interfacial Friction Correlations

    Directory of Open Access Journals (Sweden)

    Vladimir Melikhov

    2011-01-01

    Full Text Available The horizontal steam generator (SG is one of specific features of Russian-type pressurized water reactors (VVERs. The main advantages of horizontal steam generator are connected with low steam loads on evaporation surface, simple separation scheme and high circulation ratio. The complex three-dimensional steam-water flows in the steam generator vessel influence significantly the processes of the steam separation, distribution, and deposition of the soluble and nonsoluble impurities and determine the efficiency and reliability of the steam generator operation. The 3D code for simulation of the three-dimensional steam-water flows in the steam generator could be effective tool for design and optimization of the horizontal steam generator. The results of the code calculations are determined mainly by the set of the correlations describing interaction of the steam-water mixture with the inner constructions of the SG and interfacial friction. The results obtained by 3D code STEG with the usage of the different interfacial friction correlations are presented and discussed in the paper. These results are compared with the experimental ones obtained at the experimental test facility PGV-1500 constructed for investigation of the processes in the horizontal steam generator.

  16. Ultrasonic Flaw Imaging via Multipath Exploitation

    Directory of Open Access Journals (Sweden)

    Yimin D. Zhang

    2012-01-01

    Full Text Available We consider ultrasonic imaging for the visualization of flaws in a material. Ultrasonic imaging is a powerful nondestructive testing (NDT tool which assesses material conditions via the detection, localization, and classification of flaws inside a structure. We utilize reflections of ultrasonic signals which occur when encountering different media and interior boundaries. These reflections can be cast as direct paths to the target corresponding to the virtual sensors appearing on the top and bottom side of the target. Some of these virtual sensors constitute a virtual aperture, whereas in others, the aperture changes with the transmitter position. Exploitations of multipath extended virtual array apertures provide enhanced imaging capability beyond the limitation of traditional multisensor approaches. The waveforms observed at the physical as well as the virtual sensors yield additional measurements corresponding to different aspect angles, thus allowing proper multiview imaging of flaws. We derive the wideband point spread functions for dominant multipaths and show that fusion of physical and virtual sensor data improves the flaw perimeter detection and localization performance. The effectiveness of the proposed multipath exploitation approach is demonstrated using real data.

  17. Compressed sensing MRI exploiting complementary dual decomposition.

    Science.gov (United States)

    Park, Suhyung; Park, Jaeseok

    2014-04-01

    Compressed sensing (CS) MRI exploits the sparsity of an image in a transform domain to reconstruct the image from incoherently under-sampled k-space data. However, it has been shown that CS suffers particularly from loss of low-contrast image features with increasing reduction factors. To retain image details in such degraded experimental conditions, in this work we introduce a novel CS reconstruction method exploiting feature-based complementary dual decomposition with joint estimation of local scale mixture (LSM) model and images. Images are decomposed into dual block sparse components: total variation for piecewise smooth parts and wavelets for residuals. The LSM model parameters of residuals in the wavelet domain are estimated and then employed as a regional constraint in spatially adaptive reconstruction of high frequency subbands to restore image details missing in piecewise smooth parts. Alternating minimization of the dual image components subject to data consistency is performed to extract image details from residuals and add them back to their complementary counterparts while the LSM model parameters and images are jointly estimated in a sequential fashion. Simulations and experiments demonstrate the superior performance of the proposed method in preserving low-contrast image features even at high reduction factors. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. ROUNDTABLE - SESSION 2 EXPLOITATION, CONSERVATION AND LEGISLATION

    Directory of Open Access Journals (Sweden)

    EDSMAN L.

    2004-01-01

    Full Text Available The link between socioeconomics and conservation and the role of legislation in conservation work was discussed in the group with participants from nine European countries. Interest and knowledge among the general public, stakeholders and managers is the key to successful conservation of native crayfish species. Exploitation and conservation do not necessarily exclude each other. A controlled fishery, where it can be sustained, may be an essential tool for conservation by increasing the general awareness and involving more people in the task of protecting the native crayfish species. This strategy is mainly possible for the noble crayfish in the northern part of its distribution, where strong traditions connected to crayfish also exist. A balance between utilisation and overexploitation has to be found and local guidelines for sustainable exploitation produced. Media, the Internet and educational material aimed at schools and stakeholders are excellent ways of reaching a wide audience with information. Universal objectives, rules and regulations at the European level are desirable and the noble crayfish and the stone crayfish should be included in Annex II of the Habitat Directive. Based on this framework detailed regulations are best worked out at the national level, considering the specific crayfish situation in the country. Information about the legislation, the purpose of the legislation and the consequences when not obeying it should be distributed. Stricter regulation of the trade with live alien crayfish is vital because of the associated risk of introducing new diseases and species.

  19. Exploiting time in electronic health record correlations.

    Science.gov (United States)

    Hripcsak, George; Albers, David J; Perotte, Adler

    2011-12-01

    To demonstrate that a large, heterogeneous clinical database can reveal fine temporal patterns in clinical associations; to illustrate several types of associations; and to ascertain the value of exploiting time. Lagged linear correlation was calculated between seven clinical laboratory values and 30 clinical concepts extracted from resident signout notes from a 22-year, 3-million-patient database of electronic health records. Time points were interpolated, and patients were normalized to reduce inter-patient effects. The method revealed several types of associations with detailed temporal patterns. Definitional associations included low blood potassium preceding 'hypokalemia.' Low potassium preceding the drug spironolactone with high potassium following spironolactone exemplified intentional and physiologic associations, respectively. Counterintuitive results such as the fact that diseases appeared to follow their effects may be due to the workflow of healthcare, in which clinical findings precede the clinician's diagnosis of a disease even though the disease actually preceded the findings. Fully exploiting time by interpolating time points produced less noisy results. Electronic health records are not direct reflections of the patient state, but rather reflections of the healthcare process and the recording process. With proper techniques and understanding, and with proper incorporation of time, interpretable associations can be derived from a large clinical database. A large, heterogeneous clinical database can reveal clinical associations, time is an important feature, and care must be taken to interpret the results.

  20. PROBA-V Mission Exploitation Platform

    Directory of Open Access Journals (Sweden)

    Erwin Goor

    2016-07-01

    Full Text Available As an extension of the PROBA-Vegetation (PROBA-V user segment, the European Space Agency (ESA, de Vlaamse Instelling voor Technologisch Onderzoek (VITO, and partners TRASYS and Spacebel developed an operational Mission Exploitation Platform (MEP to drastically improve the exploitation of the PROBA-V Earth Observation (EO data archive, the archive from the historical SPOT-VEGETATION mission, and derived products by researchers, service providers, and thematic users. The analysis of the time series of data (petabyte range is addressed, as well as the large scale on-demand processing of the complete archive, including near real-time data. The platform consists of a private cloud environment, a Hadoop-based processing environment and a data manager. Several applications are released to the users, e.g., a full resolution viewing service, a time series viewer, pre-defined on-demand processing chains, and virtual machines with powerful tools and access to the data. After an initial release in January 2016 a research platform was deployed gradually, allowing users to design, debug, and test applications on the platform. From the PROBA-V MEP, access to, e.g., Sentinel-2 and Sentinel-3 data will be addressed as well.

  1. Flat Drops, Elastic Sheets, and Microcapsules by Interfacial Assembly of a Bacterial Biofilm Protein, BslA.

    Science.gov (United States)

    Kaufman, Gilad; Liu, Wei; Williams, Danielle M; Choo, Youngwoo; Gopinadhan, Manesh; Samudrala, Niveditha; Sarfati, Raphael; Yan, Elsa C Y; Regan, Lynne; Osuji, Chinedum O

    2017-11-28

    Protein adsorption and assembly at interfaces provide a potentially versatile route to create useful constructs for fluid compartmentalization. In this context, we consider the interfacial assembly of a bacterial biofilm protein, BslA, at air-water and oil-water interfaces. Densely packed, high modulus monolayers form at air-water interfaces, leading to the formation of flattened sessile water drops. BslA forms elastic sheets at oil-water interfaces, leading to the production of stable monodisperse oil-in-water microcapsules. By contrast, water-in-oil microcapsules are unstable but display arrested rather than full coalescence on contact. The disparity in stability likely originates from a low areal density of BslA hydrophobic caps on the exterior surface of water-in-oil microcapsules, relative to the inverse case. In direct analogy with small molecule surfactants, the lack of stability of individual water-in-oil microcapsules is consistent with the large value of the hydrophilic-lipophilic balance (HLB number) calculated based on the BslA crystal structure. The occurrence of arrested coalescence indicates that the surface activity of BslA is similar to that of colloidal particles that produce Pickering emulsions, with the stability of partially coalesced structures ensured by interfacial jamming. Micropipette aspiration and flow in tapered capillaries experiments reveal intriguing reversible and nonreversible modes of mechanical deformation, respectively. The mechanical robustness of the microcapsules and the ability to engineer their shape and to design highly specific binding responses through protein engineering suggest that these microcapsules may be useful for biomedical applications.

  2. Direct, Dynamic Measurement of Interfacial Area within Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Crandall, Dustin; Ahmadi, Goodarz; Smith, Duane H.; Bromhal, Grant

    2010-01-01

    Standard models of two-phase flow in porous media have been shown to exhibit several shortcomings that might be partially overcome with a recently developed model based on thermodynamic principles (Hassanizadeh and Gray, 1990). This alternative two-phase flow model contains a set of new and non-standard parameters, including specific interfacial area. By incorporating interfacial area production, destruction, and propagation into functional relationships that describe the capillary pressure and saturation, a more physical model has been developed. Niessner and Hassanizadeh (2008) have examined this model numerically and have shown that the model captures saturation hysteresis with drainage/imbibition cycles. Several static experimental studies have been performed to examine the validity of this new thermodynamically based approach; these allow the determination of static parameters of the model. To date, no experimental studies have obtained information about the dynamic parameters required for the model. A new experimental porous flow cell has been constructed using stereolithography to study two-phase flow phenomena (Crandall et al. 2008). A novel image analysis tool was developed for an examination of the evolution of flow patterns during displacement experiments (Crandall et al. 2009). This analysis tool enables the direct quantification of interfacial area between fluids by matching known geometrical properties of the constructed flow cell with locations identified as interfaces from images of flowing fluids. Numerous images were obtained from two-phase experiments within the flow cell. The dynamic evolution of the fluid distribution and the fluid-fluid interface locations were determined by analyzing these images. In this paper, we give a brief introduction to the thermodynamically based two-phase flow model, review the properties of the stereolithography flow cell, and show how the image analysis procedure has been used to obtain dynamic parameters for the

  3. INTERFACIAL AREA TRANSPORT AND REGIME TRANSITION IN COMBINATORIAL CHANNELS

    Energy Technology Data Exchange (ETDEWEB)

    Seugjin Kim

    2011-01-28

    . This study investigates the geometric effects of 90-degree vertical elbows and flow configurations in two-phase flow. The study shows that the elbows make a significant effect on the transport characteristics of two-phase flow, which includes the changes in interfacial structures, bubble interaction mechanisms and flow regime transition. The effect of the elbows is characterized for global and local two-phase flow parameters. The global two-phase flow parameters include two-phase pressure, interfacial structures and flow regime transition. In order to characterize the frictional pressure drop and minor loss across the vertical elbows, pressure measurements are obtained across the test section over a wide range of flow conditions in both single-phase and two-phase flow conditions. A two-phase pressure drop correlation analogous to Lockhart-Martinelli correlation is proposed to predict the minor loss across the elbows. A high speed camera is employed to perform extensive flow visualization studies across the elbows in vertical upward, horizontal and vertical downward sections and modified flow regime maps are proposed. It is found that modified flow regime maps immediately downstream of the vertical upward elbow deviate significantly from the conventional flow regime map. A qualitative assessment of the counter-current flow limitation characteristics specific to the current experimental facility is performed. A multi-sensor conductivity probe is used to measure local two-phase flow parameters such as: void fraction, bubble velocity, interfacial area concentration and bubble frequency. The local measurements are obtained for six different flow conditions at ten measurement locations along axial direction of the test section. Both the vertical-upward and vertical-downward elbows have a significant impact on bubble distribution, resulting in, a bimodal distribution along the horizontal radius of the tube cross-section and migration of bubbles towards the inside of the

  4. Determination of interfacial tension of binary mixtures from perturbative approaches

    Science.gov (United States)

    Martínez-Ruiz, F. J.; Blas, F. J.

    2015-05-01

    We determine the interfacial properties of mixtures of spherical Lennard-Jones molecules from direct simulation of the vapour-liquid interface. We consider mixtures with same molecular size but different dispersive energy parameter values. We use the extensions of the improved version of the inhomogeneous long-range corrections of Janeček, presented recently by MacDowell and Blas and Martínez-Ruiz et al., to deal with the interaction energy and microscopic components of the pressure tensor. We have performed Monte Carlo simulations in the canonical ensemble to obtain the interfacial properties of mixtures of Lennard-Jones molecules with a cut-off distance rc = 3σ in combination with the inhomogeneous long-range corrections. The pressure tensor is obtained using the mechanical (virial) and thermodynamic route. The vapour-liquid interfacial tension is also evaluated using three different procedures, the Irving-Kirkwood method, the difference between the macroscopic components of the pressure tensor, and the test-area methodology. This allows to check the validity of the recent extensions presented to deal with the contributions due to long-range corrections for intermolecular energy and pressure tensor in the case of binary mixtures. In addition to the pressure tensor and the surface tension, we also obtain density profiles, coexistence densities, and interfacial thickness as functions of pressure, at a given temperature. According to our results, the main effect of increasing the ratio between the dispersive energy parameters of the mixture, ε22/ε11, is to sharpen the vapour-liquid interface and to increase the width of the biphasic coexistence region. Particularly interesting is the presence of a relative maximum in the density profiles of the less volatile component at the interface. This maximum is related with adsorption or accumulation of these molecules at the interface, a direct consequence of stronger attractive interactions between these molecules in

  5. Vertical and Interfacial Transport in Wetlands (Invited)

    Science.gov (United States)

    Variano, E. A.

    2010-12-01

    The objective of this work is to understand the fluxes connecting the water column, substrate, and atmosphere in wetland environments. To do this, analytical, numerical, and laboratory models have been used to quantify the hydrodynamic contributions to vertical fluxes. A key question is whether the hydrodynamic transport can be modeled as a diffusivity, and, if so, what the vertical structure of this diffusivity is. This question will be addressed in a number of flow types and for a number of fluxes. The fluxes of interest are heat, sediment, dissolved gases (such as methane and oxygen) and other dissolved solutes (such as nutrients and pollutants). The flows of interest include: unidirectional current, reversing flow (under waves, seiches, and tides), wind-sheared surface flows, and thermal convection. Rain and bioturbation can be important, but are not considered in the modeling work discussed herein. Specifically, we will present results on gas transport at wind-sheared free surface, sediment transport in unidirectional flow, and heat transfer in an oscillating flow cause by a seiche. All three of these will be used to consider the question of appropriate analytical models for vertical transport. The analytic models considered here are all 1D models that assume homogeneity in the horizontal plane. The numerical models use finite element methods and resolve the flow around individual vegetation stems in an idealized geometry. Laboratory models discussed herein also use an idealized geometry. Vegetation is represented by an array of cylinders, whose geometry is modeled after Scirpus spp. wetlands in Northern California. The laboratory model is constructed in a way that allows optical access to the flow, even in dense vegetation and far from boundaries. This is accomplished by using fluoropolymer plastics to construct vegetation models. The optical access allows us to employ particle image velocimetry (PIV) and planar laser induced fluorescence (PLIF) to measure

  6. Interfacial arrangement and phase transitions of PNiPAm microgels with different crosslinking densities.

    Science.gov (United States)

    Rey, Marcel; Hou, Xunan; Tang, Jo Sing Julia; Vogel, Nicolas

    2017-11-29

    Microgels are colloidal hydrogel particles that exhibit a pronounced softness, which arises from the swollen nature of the constituent polymer network. This softness leads to a substantial deformability of such particles at liquid interfaces, which, in turn translates into a complex phase behaviour that can exhibit a phase transition between a non-close packed and a close packed arrangement. Here, we explore how the degree of swellability and deformability - and therefore the softness of the particles - affects the phase behaviour of microgels at the air/water interface upon compression. We use precipitation polymerization to synthesize poly(N-isopropylacrylamide) microgels with similar hydrodynamic radii in the collapsed state and systematically vary the degree of swellability by changing the crosslinking density. We spread these microgels onto the air/water interface of a Langmuir trough and characterize their interfacial properties by surface pressure - area isotherms. Furthermore, we continuously transfer the interfacial microgel monolayer during compression onto a solid substrate, thus encoding the complete phase diagram of the microgels with increasing particle density as a function of the position on the solid substrate. We investigate the microgel arrangement by atomic force microscopy and scanning electron microscopy and use image analysis to extract quantitative information on the interparticle distance and degree of order. We find that the phase transition is very sensitive to the crosslinking density and occurs at much lower surface pressures for less deformable particles. The softest microgels do not undergo any phase transition. Instead, the system exhibits pronounced local conformation changes around point defects with local five- and sevenfold symmetries, indicating that the geometry of the assembled structure effectively controls the local pressure experienced by the microgels.

  7. Improvement of interfacial interactions using natural polyphenol-inspired tannic acid-coated nanoclay enhancement of soy protein isolate biofilms

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhong; Kang, Haijiao; Zhang, Wei [MOE Key Laboratory of Wooden Material Science and Application, Beijing Forestry University, Beijing, 100083 (China); Beijing Key Laboratory of Wood Science and Engineering, Beijing Forestry University, Beijing, 100083 (China); Zhang, Shifeng, E-mail: shifeng.zhang@bjfu.edu.cn [MOE Key Laboratory of Wooden Material Science and Application, Beijing Forestry University, Beijing, 100083 (China); Beijing Key Laboratory of Wood Science and Engineering, Beijing Forestry University, Beijing, 100083 (China); Li, Jianzhang, E-mail: lijzh@bjfu.edu.cn [MOE Key Laboratory of Wooden Material Science and Application, Beijing Forestry University, Beijing, 100083 (China); Beijing Key Laboratory of Wood Science and Engineering, Beijing Forestry University, Beijing, 100083 (China)

    2017-04-15

    Highlights: • A novel interface of MMT was fabricated by natural polyphenol (TA)-inspired chemistry. • The resultant biomimetic surface exhibited good interface and surface compatibility. • TA can act as a bridge between MMT and SPI to enhance the interfacial interaction. • Surface-modified MMT gets the potential to be used in the modification of SPI biofilms for improving the mechanical properties and water resistance apparently. - Abstract: In this study, a novel and economic surface modification technique for montmorillonite (MMT) nanosheets, a biocompatible coupling cross-linking agent, was developed on an attempt at improving the interfacial adhesion with soy protein isolate (SPI) matrix. Inspired by natural polyphenol, the “green dip-coating” method using tannic acid (TA) to surface-modify MMT (TA@MMT). SPI nanocomposite films modified with MMT or TA@MMT, as well as the control ones, were prepared via the casting method. The TA layer was successfully coated on the MMT surface through the (Fe{sup III}) ions coordination chemistry and the synthetic samples were characterized by the Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), atomic force microscopy (AFM), and transmission electron microscopy (TEM). The compatibility and interfacial interactions between modified MMT and SPI matrix were greatly enhanced by the TA-Fe{sup III} coating on the MMT surface. The mechanical properties, water resistance, and thermal stability of the resultant biofilm were increased accordingly. Compared with that of the unmodified SPI film, the tensile strength of the nanocomposite films modified by the green dip-coating was increased by 113.3%. These SPI-based nanocomposite films showed the favorable potential in terms of food packing applications due to their efficient barriers to water vapor and UV and/or visible light.

  8. Coastal Karst Aquifers in Mediterranean Regions. 2. A Methodology for Exploring, Exploiting and monitoring Submarine Springs

    OpenAIRE

    Bakalowicz, Michel; Fleury, P.; Jouvencel, Bruno; Promé, Jean-Jacques; Becker, P.; Carlin, Thierry; Dörfliger, Nathalie; Seidel, Jean-Luc; Sergent, Philippe

    2003-01-01

    International audience; In coastal regions, the study of karst aquifers and the ground water resource exploitation require a specific methodology and exploration and monitoring techniques. Two directions are investigated, leading to new technological and methodological developments. The first investigation axis deals with the exploration of fresh water plumes from submarine karst springs. An Autonomous Underwater Vehicle (AUV) is being developed and tested in order to collect all data (salini...

  9. Virtual Exploitation Environment Demonstration for Atmospheric Missions

    Science.gov (United States)

    Natali, Stefano; Mantovani, Simone; Hirtl, Marcus; Santillan, Daniel; Triebnig, Gerhard; Fehr, Thorsten; Lopes, Cristiano

    2017-04-01

    The scientific and industrial communities are being confronted with a strong increase of Earth Observation (EO) satellite missions and related data. This is in particular the case for the Atmospheric Sciences communities, with the upcoming Copernicus Sentinel-5 Precursor, Sentinel-4, -5 and -3, and ESA's Earth Explorers scientific satellites ADM-Aeolus and EarthCARE. The challenge is not only to manage the large volume of data generated by each mission / sensor, but to process and analyze the data streams. Creating synergies among the different datasets will be key to exploit the full potential of the available information. As a preparation activity supporting scientific data exploitation for Earth Explorer and Sentinel atmospheric missions, ESA funded the "Technology and Atmospheric Mission Platform" (TAMP) [1] [2] project; a scientific and technological forum (STF) has been set-up involving relevant European entities from different scientific and operational fields to define the platforḿs requirements. Data access, visualization, processing and download services have been developed to satisfy useŕs needs; use cases defined with the STF, such as study of the SO2 emissions for the Holuhraun eruption (2014) by means of two numerical models, two satellite platforms and ground measurements, global Aerosol analyses from long time series of satellite data, and local Aerosol analysis using satellite and LIDAR, have been implemented to ensure acceptance of TAMP by the atmospheric sciences community. The platform pursues the "virtual workspace" concept: all resources (data, processing, visualization, collaboration tools) are provided as "remote services", accessible through a standard web browser, to avoid the download of big data volumes and for allowing utilization of provided infrastructure for computation, analysis and sharing of results. Data access and processing are achieved through standardized protocols (WCS, WPS). As evolution toward a pre

  10. Total exploitation of an ornamental granite quarry

    Directory of Open Access Journals (Sweden)

    Taboada, J.

    2005-09-01

    Full Text Available In this paper we propose a methodology to estimate the recovery percentage for each of the products which can be obtained from the exploitation of an ornamental granite quarry: block, semiblock, masonry-transverse stone, and the smaller materials that can be used to obtain construction aggregates. This methodology ensures that quarry exploitation is exhaustive, thereby minimising the production of spoils and the consequent negative impact on the environment. The analysis is based on a detailed and exhaustive compilation of discontinuity data from the research fronts, which are then interpreted statistically and projected over the three weakness planes that are a particular feature of ornamental granite deposits. Using this information, and bearing in mind the minimum commercially viable sizes for each kind of granite, the corresponding recovery rates are calculated for each material in each plane. The results are then integrated using spatial techniques, and the result is an evaluation of quarry contents with a view to total exploitation. This methodology was applied to a quarry in the opening phase in order to carry out an a priori assessment of the economic feasibility of the quarry.

    En este trabajo se propone una metodología para estimar el porcentaje de recuperación de cada uno de los productos que se pueden obtener en la explotación de una cantera de granito ornamental: bloque, semibloque, manpostería y per piaños, y material restante destinado a la obtención de áridos. De esta manera se logra un aprovechamiento integral de la cantera, evitándose la generación de estériles y el subsiguiente impacto ambiental producido por éstos. La metodología de análisis se basa en la recopilación detallada y exhaustiva de datos de discontinuidades en los frentes de investigación, que se interpretan estadísticamente y se proyectan sobre los tres planos de debilidad propios del granito ornamental. Con esta información, y las

  11. Water

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-08-01

    Full Text Available , and of the remaining 2,5 percent, some 70 percent is frozen in the polar caps and around 30 percent is present as soil moisture or in underground aquifers. Less than 1 percent is thus accessible for direct use by humans, animals and plants. Consequently... be serviced with harvested water and/or grey water. Conserve and reuse cooling tower water by using efficient systems and strategies. Avoid ?once-through systems? commonly used for evaporation coolers, ice makers, hydraulic equipment, and air compressors...

  12. Effect of interfacial reaction rate on the morphogenesis of nanostructured coatings in a simulated electrodeposition process.

    Science.gov (United States)

    Magan, Rahul V; Sureshkumar, Radhakrishna

    2005-07-01

    Brownian dynamics simulations (BDSs) are performed to investigate the influence of interfacial electrochemical reaction rate on the evolution of coating morphology on circular fibres. The boundary condition for the fluid phase concentration, representing the balance between the rates of interfacial reaction and transport of ions by bulk diffusion, is incorporated into the BDS by using a reaction probability, P(s). Different modes of growth, ranging from diffusion limited ([Formula: see text]) to reaction controlled [Formula: see text], are studied. It is found that, consistent with experimental observations, two distinct morphological regimes exist, with a dense and uniform structure for [Formula: see text] (reaction limited deposition (RLD)) and an open and porous one as [Formula: see text] (diffusion limited deposition (DLD)). An analysis of the fractal dimension indicates that this morphological transition occurs at P(s)≈0.3. Long-time power-law scalings for the evolution of thickness [Formula: see text] and roughness (ξ) of the coating exist, i.e. [Formula: see text] with 0.86≤α≤0.91 and 0.56≤β≤0.93 for 0.01≤P(s)≤1. These values are different from those reported for sequential, pseudo-time lattice simulations on planar surfaces, signifying the importance of multiparticle dynamics and surface curvature. The internal structure and porosity of the coating are characterized quantitatively by the radial density profile, pair correlation function, two-point probability function, void distribution function and pore area distribution. For RLD the radial density, ρ(n), remains nearly constant, while for DLD ρ(n) follows a power law, [Formula: see text]. The coating exhibits short ranged order in the RLD regime while a long range order is created by DLD. The void distribution function becomes broader with increasing P(s), indicating that in the RLD regime the coating consists of small and spherical pores, while in the DLD regime large and elongated

  13. Exploiting CRISPR/Cas systems for biotechnology.

    Science.gov (United States)

    Sampson, Timothy R; Weiss, David S

    2014-01-01

    The Cas9 endonuclease is the central component of the Type II CRISPR/Cas system, a prokaryotic adaptive restriction system against invading nucleic acids, such as those originating from bacteriophages and plasmids. Recently, this RNA-directed DNA endonuclease has been harnessed to target DNA sequences of interest. Here, we review the development of Cas9 as an important tool to not only edit the genomes of a number of different prokaryotic and eukaryotic species, but also as an efficient system for site-specific transcriptional repression or activation. Additionally, a specific Cas9 protein has been observed to target an RNA substrate, suggesting that Cas9 may have the ability to be programmed to target RNA as well. Cas proteins from other CRISPR/Cas subtypes may also be exploited in this regard. Thus, CRISPR/Cas systems represent an effective and versatile biotechnological tool, which will have significant impact on future advancements in genome engineering. © 2014 WILEY Periodicals, Inc.

  14. Exploiting HRM in support of lean manufacturing

    DEFF Research Database (Denmark)

    Jørgensen, Frances; Matthiesen, Rikke

    The purpose of this paper is to investigate the ways in HRM practices are-and could potentially be-exploited to support lean manufacturing in practice. First, a review of the pertinent literature regarding HRM, SHRM, and lean manufacturing is presented to provide an understanding of the mechanisms...... by which HRM practices could, theoretically, be used to support a lean implementation. Data presented in the paper are derived from 1) a longitudinal case study on lean implementation and 2) from managers currently involved with lean manufacturing in a second company. The relevant literature and the data......'s contribution to the change process itself and through bundling particular HRM practices that are aligned with the lean strategy. The paper contributes to both theory and practice, by suggesting specific ways in which HRM can be strategically aligned with a major change implementation such as lean manufacturing....

  15. Automatic image exploitation system for small UAVs

    Science.gov (United States)

    Heinze, N.; Esswein, M.; Krüger, W.; Saur, G.

    2008-04-01

    For surveillance and reconnaissance tasks small UAVs are of growing importance. These UAVs have an endurance of several hours, but a small payload of about some kilograms. As a consequence lightweight sensors and cameras have to be used without having a mechanical stabilized high precision sensor-platform, which would exceed the payload and cost limitations. An example of such a system is the German UAV Luna with optical and IR sensors on board. For such platforms we developed image exploitation algorithms. The algorithms comprise mosaiking, stabilization, image enhancement, video based moving target indication, and stereo-image generation. Other products are large geo-coded image mosaics, stereo mosaics, and 3-D-model generation. For test and assessment of these algorithms the experimental system ABUL has been developed, in which the algorithms are integrated. The ABUL system is used for tests and assessment by military PIs.

  16. Intertemporal Choice of Marine Ecosystem Exploitation

    DEFF Research Database (Denmark)

    Ravn-Jonsen, Lars

    Management, however, requires models that can link the ecosystem level to the operation level, so this paper examines an ecosystem production model and shows that it is suitable for applying ground rent theory. This model is the simplest possible that incorporates the principles of size as the main...... at the ecosystem level in the present management. Therefore, economic predictions for an ecosystem managed as a common pool resource must be that  the exploitation probably are conducted at lower sized than optimum. In addition, given its population stock approach, the present management probably overlooks...... the ability of an ecosystem to sustain total volume of harvest. Given the two aspects of intertemporal choice revealed by the model, the conclusion must be that the Fishing Down Marine Food Webs is probably driven by the current management's inability to conduct adequate intertemporal balancing; therefore...

  17. CHARACTERISTICS OF HYDROCARBON EXPLOITATION IN ARCTIC CIRCLE

    Directory of Open Access Journals (Sweden)

    Vanja Lež

    2013-12-01

    Full Text Available The existence of large quantities of hydrocarbons is supposed within the Arctic Circle. Assumed quantities are 25% of the total undiscovered hydrocarbon reserves on Earth, mostly natural gas. Over 500 major and minor gas accumulations within the Arctic Circle were discovered so far, but apart from Snøhvit gas field, there is no commercial exploitation of natural gas from these fields. Arctic gas projects are complicated, technically hard to accomplish, and pose a great threat to the return of investment, safety of people and equipment and for the ecosystem. Russia is a country that is closest to the realization of the Arctic gas projects that are based on the giant gas fields. The most extreme weather conditions in the seas around Greenland are the reason why this Arctic region is the least explored and furthest from the realization of any gas project (the paper is published in Croatian .

  18. Water

    Directory of Open Access Journals (Sweden)

    E. Sanmuga Priya

    2017-05-01

    Full Text Available Phytoremediation through aquatic macrophytes treatment system (AMATS for the removal of pollutants and contaminants from various natural sources is a well established environmental protection technique. Water hyacinth (Eichhornia crassipes, a worst invasive aquatic weed has been utilised for various research activities over the last few decades. The biosorption capacity of the water hyacinth in minimising various contaminants present in the industrial wastewater is well studied. The present review quotes the literatures related to the biosorption capacity of the water hyacinth in reducing the concentration of dyestuffs, heavy metals and minimising certain other physiochemical parameters like TSS (total suspended solids, TDS (total dissolved solids, COD (chemical oxygen demand and BOD (biological oxygen demand in textile wastewater. Sorption kinetics through various models, factors influencing the biosorption capacity, and role of physical and chemical modifications in the water hyacinth are also discussed.

  19. Pore-scale characteristics of multiphase flow in porous media: A comparison of air-water and oil-water experiments

    DEFF Research Database (Denmark)

    Culligan, K.A.; Wildenschild, Dorthe; Christensen, Britt Stenhøj Baun

    2006-01-01

    determinant of NAPL removal efficiency. To measure the interfacial area, we have used a synchrotron-based CMT technique to obtain high-resolution 3D images of flow in a Soltrol-water glass bead system. The interfacial area is found to increase as the wetting phase saturation decreases, reach a maximum...

  20. Maximising the Interfacial Fracture Toughness of Thin Coatings and Substrate through Optimisation of Defined Parameters

    OpenAIRE

    Khan, Zulfiqar Ahmad; Nazir, M.H.

    2015-01-01

    The influence of three parameters i.e. interfacial roughness, coating thickness and the size of impurity at the interface on interfacial fracture toughness has been investigated within the framework of two approaches i.e. thermodynamics and fracture mechanics. Mathematical relationship for both the approaches have been designed independently and then fused to form a governing law for evaluating the interfacial toughness. Simulation techniques founded on the experimental studies, have been dev...

  1. Effects of anthropogenic groundwater exploitation on land surface processes: A case study of the Haihe River Basin, northern China

    Science.gov (United States)

    Zou, Jing; Xie, Zhenghui; Zhan, Chesheng; Qin, Peihua; Sun, Qin; Jia, Binghao; Xia, Jun

    2015-05-01

    In this study, we incorporated a groundwater exploitation scheme into the land surface model CLM3.5 to investigate the effects of the anthropogenic exploitation of groundwater on land surface processes in a river basin. Simulations of the Haihe River Basin in northern China were conducted for the years 1965-2000 using the model. A control simulation without exploitation and three exploitation simulations with different water demands derived from socioeconomic data related to the Basin were conducted. The results showed that groundwater exploitation for human activities resulted in increased wetting and cooling effects at the land surface and reduced groundwater storage. A lowering of the groundwater table, increased upper soil moisture, reduced 2 m air temperature, and enhanced latent heat flux were detected by the end of the simulated period, and the changes at the land surface were related linearly to the water demands. To determine the possible responses of the land surface processes in extreme cases (i.e., in which the exploitation process either continued or ceased), additional hypothetical simulations for the coming 200 years with constant climate forcing were conducted, regardless of changes in climate. The simulations revealed that the local groundwater storage on the plains could not contend with high-intensity exploitation for long if the exploitation process continues at the current rate. Changes attributable to groundwater exploitation reached extreme values and then weakened within decades with the depletion of groundwater resources and the exploitation process will therefore cease. However, if exploitation is stopped completely to allow groundwater to recover, drying and warming effects, such as increased temperature, reduced soil moisture, and reduced total runoff, would occur in the Basin within the early decades of the simulation period. The effects of exploitation will then gradually disappear, and the variables will approach the natural state and

  2. Microfluidic room temperature ionic liquid droplet generation depending on the hydrophobicity and interfacial tension

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Jung Wook; Chang, Woo-Jin [University of Wisconsin-Milwaukee, Milwaukee (United States); Choi, Joo Hyung; Koo, Yoon Mo [Department of Biological Engineering, Incheon (Korea, Republic of); Choi, Bum Joon; Lee, Gyu Do; Lee, Sang Woo [Yonsei University, Wonju (Korea, Republic of)

    2016-01-15

    We have characterized micro-droplet generation using water immiscible hexafluorophosphate ([PF{sub 6}])- and bis(trifluoro methylsulfonyl)imide ([Tf{sub 2}N])-based room temperature ionic liquids (RTILs). The interfacial tension between total 7 RTILs and phosphate buffered saline (PBS) was measured using a tensiometer for the first time. PBS is one of the most commonly used buffer solutions in cell-related researches. The measured interfacial tension ranges from 8.51 to 11.62 and from 9.56 to 13.19 for [Tf{sub 2}N]- and [PF{sub 6}]-based RTILs, respectively. The RTILs micro-droplets were generated in a microfluidic device. The micro-droplet size and generation frequency were determined based on continuous monitoring of light transmittance at the interface in microchannel. The size of RTIL micro-droplets was inversely proportional to the increase of PBS solution flow rate and RTILs hydrophobicity, while droplet generation frequency was proportional to those changes. The measured size of RTILs droplets ranged from 0.6 to 10.5 nl, and from 1.0 to 17.1 nl for [Tf{sub 2}N]- and [PF{sub 6}]-based RTILs, respectively. The measured frequency of generated RTILs droplets ranged from 2.3 to 37.2 droplet/min, and from 2.7 to 17.1 droplet/min for [Tf{sub 2}N]- and [PF{sub 6}]-based RTILs, respectively. The capillary numbers were calculated depending on the RTILs, and ranged from 0.51x10{sup -3} to 1.06x10{sup -3} and from 5.00x10{sup -3} to 8.65x10{sup -3}, for [Tf{sub 2}N]- and [PF{sub 6}]-based RTILs, respectively. The interfacial tension between RTILs and PBS will contribute to developing bioprocesses using immiscible RTILs. Also, the RTILs micro-droplets will enable the high-throughput monitoring of various biological and chemical reactions using RTILs as new reaction media.

  3. An Effect Analysis of Comprehensive Treatment of Groundwater Over-Exploitation in Cheng’an County, Hebei Province, China

    Science.gov (United States)

    Shao, Weiwei; Zhou, Jinjun; Liu, Jiahong; Zhang, Haixing; Wang, Jianhua; Xiang, Chenyao; Yang, Guiyu; Tang, Yun

    2017-01-01

    The comprehensive treatment project of groundwater over-exploitation in Hebei Province has been implemented for more than a year, and the effect of exploitation restriction is in urgent need of evaluation. This paper deals with Cheng’an County of Hebei Province as the research subject. Based on collected hydro-meteorological, socioeconomic, groundwater, and other related data, together with typical regional experimental research, this study generates the effective precipitation–groundwater exploitation (P-W) curve and accompanying research methods, and calculates the quantity of groundwater exploitation restriction. It analyzes the target completion status of groundwater exploitation restriction through water conservancy measures and agricultural practices of the groundwater over-exploitation comprehensive treatment project that was implemented in Cheng’an County in 2014. The paper evaluates the treatment effect of groundwater over-exploitation, as well as provides technical support for the effect evaluation of groundwater exploitation restriction of agricultural irrigation in Cheng’an County and relevant areas. PMID:28054979

  4. SH ultrasonic guided waves for the evaluation of interfacial adhesion.

    Science.gov (United States)

    Castaings, Michel

    2014-09-01

    Shear-Horizontally (SH) polarized, ultrasonic, guided wave modes are considered in order to infer changes in the adhesive properties at several interfaces located within an adhesive bond joining two metallic plates. Specific aluminium lap-joint samples were produced, with different adhesive properties at up to four interfaces when a glass-epoxy film is inserted into the adhesive bond. EMAT transducers were used to generate and detect the fundamental SH0 mode. This is launched from one plate and detected at the other plate, past the lap joint. Signals are picked up for different propagation paths along each sample, in order to check measurement reproducibility as well as the uniformity of the adhesively bonded zones. Signals measured for four samples are then compared, showing very good sensitivity of the SH0 mode to changes in the interfacial adhesive properties. In addition, a Finite Element-based model is used to simulate the experimental measurements. The model includes adhesive viscoelasticity, as well as spatial distributions of shear springs (with shear stiffness KT) at both metal-adhesive interfaces, and also at the adhesive-film interfaces when these are present. This model is solved in the frequency domain, but temporal excitation and inverse FFT procedure are implemented in order to simulate the measured time traces. Values of the interfacial adhesive parameters, KT, are determined by an optimization process so that best fit is obtained between both sets of measured and numerically predicted waveforms. Such agreement was also possible by adjusting the shear modulus of the adhesive component. This work suggests a promising use of SH-like guided modes for quantifying shear properties at adhesive interfaces, and shows that such waves can be used for inferring adhesive and cohesive properties of bonds separately. Finally, the paper considers improvements that could be made to the process, and its potential for testing the interfacial adhesion of adhesively

  5. Biomimetic construction of cellular shell by adjusting the interfacial energy.

    Science.gov (United States)

    Wang, Ben; Liu, Peng; Liu, Zhaoming; Pan, Haihua; Xu, Xurong; Tang, Ruikang

    2014-02-01

    Many unicellular organisms take their outer proteinaceous and lipidic membranes or carbonhydrate-rich cell walls as a template for biomineralization to synthesize a thin mineral layer as a functional covering. In nature most cells cannot be mineralized spontaneously in the normal states. Inspired by nature, we develop cytocompatible methods for cells encapsulated inside a mineral shell, called "cellular shellization." Using Layer-by-Layer (LbL) assembly, the precipitation of calcium minerals can be induced on the yeast cell surfaces. The effects of different synthetic polyelectrolytes on the calcifications of yeast, such as interfacial energy, zeta-potential, introduction time, and the affinity of mineral phase on the yeast cell surface have been studied by using constant composition method (CC) systemically and quantitatively. The results demonstrate that the effective adsorption of polyelectrolytes with carboxyl or sulfonate-rich groups on the yeast can enhance mineralization abilities of yeast cells readily, and the factor of interfacial energy plays a key role in the superficial mineralization of the cells. Furthermore, the influences of ion concentrations, as well as titration rates on the formation of inorganic shell, have also been examined. It is found that the biomimetic shell formation on the cell can also be achieved by using an appropriate selection of titration conditions rather than the pretreatment of LbL. Thus, the control of cellular biomineralization can become more feasible. In this study, we show that adjusting the interfacial energy is the key to cellular mineralization and suggest that these biomineralization treatments of single-cell may be applied as a potential and universal approach for cell-based sensing and therapy. © 2013 Wiley Periodicals, Inc.

  6. Infiltration Kinetics and Interfacial Bond Strength of Metal Matrix Composites

    Science.gov (United States)

    1992-07-01

    in Surf. and Membrane Sci., 14 (1981), 353. 11. N. Erg, and A. W. Hennicke, "Ceramics in Advanced Enerrv Technologies", ed. H. Krockel et al...OLSON, G. P. MARTIN and GBR . Brazing Metallurgy a surface that is oxide-free, or with a very EDWARDS arer teCeterothin oxide layer which readily decom...JANAF Thermochemical Tables, 2nd ed., U.S. Dept. of Commerce, 1977, pp. 20-257. solid-vapor interfacial energy 6. Yu. Naidich: Prog. Surf. Membrane Sci

  7. A demonstration of enhancements in interfacial rheological characterisations

    DEFF Research Database (Denmark)

    Hodder, Peter; Baldursdottir, Stefania G.

    proteins can be studied as well as the typically used model proteins as bovine serum albumin (BSA) and lysozyme. Previously there was a need for high enough concentrations to produce a signal strong enough to be measured, a limitation of the technology to date. With the introduction of the new Discovery...... we have compared the performance of two models of the new Discovery Hybrid Rheometer and the AR G2 rheometer when studying the interfacial adsorption of lysozyme (from hen egg white, Sigma-Aldrich, Denmark) using the double wall ring geometry. The results show great improvement in the detection limit...

  8. Controlling Interdiffusion, Interfacial Composition, and Adhesion in Polymer Solar Cells

    KAUST Repository

    Dupont, Stephanie R.

    2014-07-10

    © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. NEXAFS spectroscopy is used to precisely quantify the interfacial composition and P3HT chain orientation at the weak P3HT:PCBM/PEDOT:PSS interface. An increase of P3HT:PCBM and PEDOT:PSS interdiffusion with post electrode deposition annealing time and temperature is found to be the underlying mechanism for effectively improving the interlayer adhesion, which is essential for the commercial realization of organic photovoltaic devices.

  9. Theory of Interfacial Tension of Partially Miscible Liquids

    OpenAIRE

    Boudh-Hir, M. -E.; Mansoori, G. A.

    2017-01-01

    The aim of this work is to study the problem of the existence of a fundamental relation between the interfacial tension of a system of two partially miscible liquids and the surface tensions of the pure substances. It is shown that these properties cannot be correlated from the physical point of view. However, an accurate relation between them may be developed using a mathematical artifact. In the light of this work, the basis of the empirical formula of Girifalco and Good is examined. The we...

  10. Nanoscale and single-molecule interfacial electron transfer

    DEFF Research Database (Denmark)

    Hansen, Allan Glargaard; Wackerbarth, Hainer; Nielsen, Jens Ulrik

    2003-01-01

    Electrochemical science and technology in the 21st century have reached high levels of sophistication. A fundamental quantum mechanical theoretical frame for interfacial electrochemical electron transfer (ET) was introduced by Revaz Dogonadze. This frame has remained for four decades as a basis...... for comprehensive later theoretical work and data interpretation in many areas of chemistry, electrochemistry, and biology. We discuss here some new areas of theoretical electrochemical ET science, with focus on nanoscale electrochemical and bioelectrochemical sciences. Particular attention is given to in situ...

  11. Photoelectrochemical Characterization of Sprayed alpha-Fe2O3 Thin Films : Influence of Si Doping and SnO2 Interfacial Layer

    NARCIS (Netherlands)

    Liang, Y.; Enache, C.S.; Van De Krol, R.

    2008-01-01

    a-Fe2O3 thin film photoanodes for solar water splitting were prepared by spray pyrolysis of Fe(AcAc)3. The donor density in the Fe2O3 films could be tuned between 10171020cm-3 by doping with silicon. By depositing a 5 nm SnO2 interfacial layer between the Fe2O3 films and the transparent conducting

  12. Sentinel-2 data exploitation with ESA's Sentinel-2 Toolbox

    Science.gov (United States)

    Gascon, Ferran; Ramoino, Fabrizzio; deanos, Yves-louis

    2017-04-01

    The Sentinel-2 Toolbox is a project kicked off by ESA in early 2014, under the umbrella of the ESA SEOM programme with the aim to provide a tool for visualizing, analysing, and processing the Sentinel-2 datasets. The toolbox is an extension of the SeNtinel Application Platform (SNAP), a project resulting from the effort of the developers of the Sentinel-1, Sentinel-2 and Sentinel-3 toolbox to provide a single common application framework suited for the mixed exploitation of SAR, high resolution optical and medium resolution optical datasets. All three development teams collaborate to drive the evolution of the common SNAP framework in a developer forum. In this triplet, the Sentinel-2 toolbox is dedicated to enhance SNAP support for high resolution optical imagery. It is a multi-mission toolbox, already providing support for Sentinel-2, RapidEye, Deimos, SPOT 1 to SPOT 5 datasets. In terms of processing algorithms, SNAP provides tools specific to the Sentinel-2 mission : • An atmospheric correction module, Sen2Cor, is integrated into the toolbox, and provides scene classification, atmospheric correction, cirrus detection and correction. The output L2A products can be opened seamlessly in the toolbox. • A multitemporal synthesis processor (L3) • A biophysical products processor (L2B) • A water processor • A deforestation detector • OTB tools integration • SNAP Engine for Cloud Exploitation along with a set of more generic tools for high resolution optical data exploitation. Together with the generic functionalities of SNAP this provides an ideal environment for designing multi-missions processing chains and producing value-added products from raw datasets. The use of SNAP is manifold and the desktop tools provides a rich application for interactive visualization, analysis and processing of data. But all tools available from SNAP can be accessed via command-line through the Graph Processing Framework (GPT), the kernel of the SNAP processing engine. This

  13. Effect of application mode on interfacial morphology and chemistry between dentin and self-etch adhesives

    Science.gov (United States)

    Zhang, Ying; Wang, Yong

    2012-01-01

    Objective To investigate the influence of application mode on the interfacial morphology and chemistry between dentin and self-etch adhesives with different aggressiveness. Methods The occlusal one-third of the crown was removed from un-erupted human third molars, followed by abrading with 600 grit SiC under water. Rectangular dentin slabs were prepared by sectioning the tooth specimens perpendicular to the abraded surfaces. The obtained dentin slabs were treated with one of the two one-step self-etch adhesives: Adper Easy Bond (AEB, PH~2.5) and Adper Prompt L-Pop (APLP, PH~0.8) with (15s, active application) or without (15s, inactive application) agitation. The dentin slabs were fractured and the exposed adhesive/dentin (A/D) interfaces were examined with micro-Raman spectroscopy and scanning electron microscopy (SEM). Results The interfacial morphology, degree of dentin demineralization (DD) and degree of conversion (DC) of the strong self-etch adhesive APLP showed more significant dependence on the application mode than the mild AEB. APLP exhibited inferior bonding at the A/D interface if applied without agitation, evidenced by debonding from the dentin substrate. The DDs and DCs of the APLP with agitation were higher than those of without agitation in the interface, in contrast to the comparable DD and DC values of two AEB specimen groups with different application modes. Raman spectral analysis revealed the important role of chemical interaction between acid monomers of self-etch adhesives and dentin in the above observations. Conclusion The chemical interaction with dentin is especially important for improving the DC of the strong self-etching adhesive at the A/D interface. Agitation could benefit polymerization efficacy of the strong self-etch adhesive through enhancing the chemical interaction with tooth substrate. PMID:23153573

  14. Effect of application mode on interfacial morphology and chemistry between dentine and self-etch adhesives.

    Science.gov (United States)

    Zhang, Ying; Wang, Yong

    2013-03-01

    To investigate the influence of application mode on the interfacial morphology and chemistry between dentine and self-etch adhesives with different aggressiveness. The occlusal one-third of the crown was removed from un-erupted human third molars, followed by abrading with 600 grit SiC under water. Rectangular dentine slabs were prepared by sectioning the tooth specimens perpendicular to the abraded surfaces. The obtained dentine slabs were treated with one of the two one-step self-etch adhesives: Adper Easy Bond (AEB, pH∼2.5) and Adper Prompt L-Pop (APLP, pH∼0.8) with (15s, active application) or without (15s, inactive application) agitation. The dentine slabs were fractured and the exposed adhesive/dentine (A/D) interfaces were examined with micro-Raman spectroscopy and scanning electron microscopy (SEM). The interfacial morphology, degree of dentine demineralization (DD) and degree of conversion (DC) of the strong self-etch adhesive APLP showed more significant dependence on the application mode than the mild AEB. APLP exhibited inferior bonding at the A/D interface if applied without agitation, evidenced by debonding from the dentine substrate. The DDs and DCs of the APLP with agitation were higher than those of without agitation in the interface, in contrast to the comparable DD and DC values of two AEB specimen groups with different application modes. Raman spectral analysis revealed the important role of chemical interaction between acid monomers of self-etch adhesives and dentine in the above observations. The chemical interaction with dentine is especially important for improving the DC of the strong self-etching adhesive at the A/D interface. Agitation could benefit polymerization efficacy of the strong self-etch adhesive through enhancing the chemical interaction with tooth substrate. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Molecular determinants for interfacial binding and conformational change in a soluble diacylglycerol kinase.

    Science.gov (United States)

    Jerga, Agoston; Miller, Darcie J; White, Stephen W; Rock, Charles O

    2009-03-13

    DgkB is a soluble diacylglycerol (DAG) kinase that is essential for membrane lipid homeostasis in many Gram-positive pathogens. Anionic phospholipids, like phosphatidylglycerol (PtdGro), were required for DgkB to recognize diacylglycerol embedded in a phospholipid bilayer. An activity-independent vesicle binding assay was used to determine the role of specific residues in DgkB-PtdGro interactions. Lys15 and Lys165 were required for DgkB to dock with PtdGro vesicles and flank the entrance to the DgkB active site. Mg2+ was required for vesicle binding. The compromised vesicle binding by mutants in the key asparate residues forming the structural Mg2+-aspartate-water network within the substrate binding domain revealed that interfacial binding of DgkB required a Mg2+-dependent conformational change. DgkB interaction with phospholipid vesicles was not influenced by the presence of ATP, but anionic vesicles decreased the Km of the enzyme for ATP. Arg100 and Lys15 are two surface residues in the ATP binding domain that were necessary for high affinity ATP binding. The key residues responsible for the structural Mg2+ binding site, the conformational changes that increase ATP affinity, and interfacial recognition of anionic phospholipids were identical in DgkB and the mammalian diacylglycerol kinase catalytic cores. This sequence conservation suggests that the mammalian enzymes also require a structural divalent cation and surface positively charged residues to bind phospholipid bilayers and trigger conformational changes that accelerate catalysis.

  16. Molecular Determinants for Interfacial Binding and Conformational Change in a Soluble Diacylglycerol Kinase*

    Science.gov (United States)

    Jerga, Agoston; Miller, Darcie J.; White, Stephen W.; Rock, Charles O.

    2009-01-01

    DgkB is a soluble diacylglycerol (DAG) kinase that is essential for membrane lipid homeostasis in many Gram-positive pathogens. Anionic phospholipids, like phosphatidylglycerol (PtdGro), were required for DgkB to recognize diacylglycerol embedded in a phospholipid bilayer. An activity-independent vesicle binding assay was used to determine the role of specific residues in DgkB-PtdGro interactions. Lys15 and Lys165 were required for DgkB to dock with PtdGro vesicles and flank the entrance to the DgkB active site. Mg2+ was required for vesicle binding. The compromised vesicle binding by mutants in the key asparate residues forming the structural Mg2+-aspartate-water network within the substrate binding domain revealed that interfacial binding of DgkB required a Mg2+-dependent conformational change. DgkB interaction with phospholipid vesicles was not influenced by the presence of ATP, but anionic vesicles decreased the Km of the enzyme for ATP. Arg100 and Lys15 are two surface residues in the ATP binding domain that were necessary for high affinity ATP binding. The key residues responsible for the structural Mg2+ binding site, the conformational changes that increase ATP affinity, and interfacial recognition of anionic phospholipids were identical in DgkB and the mammalian diacylglycerol kinase catalytic cores. This sequence conservation suggests that the mammalian enzymes also require a structural divalent cation and surface positively charged residues to bind phospholipid bilayers and trigger conformational changes that accelerate catalysis. PMID:19112175

  17. Characterization of linear interfacial waves in a turbulent gas-liquid pipe flow

    Science.gov (United States)

    Ayati, A. A.; Farias, P. S. C.; Azevedo, L. F. A.; de Paula, I. B.

    2017-06-01

    The evolution of interfacial waves on a stratified flow was investigated experimentally for air-water flow in a horizontal pipe. Waves were introduced in the liquid level of stratified flow near the pipe entrance using an oscillating plate. The mean height of liquid layer and the fluctuations superimposed on this mean level were captured using high speed cameras. Digital image processing techniques were used to detect instantaneous interfaces along the pipe. The driving signal of the oscillating plate was controlled by a D/A board that was synchronized with acquisitions. This enabled to perform phase-locked acquisitions and to use ensemble average procedures. Thereby, it was possible to measure the temporal and spatial evolution of the disturbances introduced in the flow. In addition, phase-locked measurements of the velocity field in the liquid layer were performed using standard planar Particle Image Velocimetry (PIV). The velocity fields were extracted at a fixed streamwise location, whereas the measurements of the liquid level were performed at several locations along the pipe. The assessment of the setup was important for validation of the methodology proposed in this work, since it aimed at providing results for further comparisons with theoretical models and numerical simulations. Therefore, the work focuses on validation and characterization of interfacial waves within the linear regime. Results show that under controlled conditions, the wave development can be well captured and reproduced. In addition, linear waves were observed for liquid level oscillations lower than about 1.5% of the pipe diameter. It was not possible to accurately define an amplitude threshold for the appearance of nonlinear effects because it strongly depended on the wave frequency. According to the experimental findings, longer waves display characteristics similar to linear waves, while short ones exhibit a more complex evolution, even for low amplitudes.

  18. Microtensile bond strength and interfacial characterization of 11 contemporary adhesives bonded to bur-cut dentin.

    Science.gov (United States)

    Sarr, Mouhamed; Kane, Abdoul Wakhabe; Vreven, José; Mine, Atsushi; Van Landuyt, Kirsten L; Peumans, Marleen; Lambrechts, Paul; Van Meerbeek, Bart; De Munck, Jan

    2010-01-01

    This study evaluated mechanically and ultra-morphologically 11 different adhesive systems bonded to dentin. The microtensile bond strength (microTBS) of 11 contemporary adhesives, including two three-step etch&rinse, three two-step etch&rinse, two two-step self-etch and four one-step self-etch adhesives to dentin, were measured. The resultant interfacial ultra-structure at dentin was characterized by transmission electron microscopy (TEM). Human third molars had their superficial dentin surface exposed, after which a standardized smear layer was produced using a medium-grit diamond bur. The selected adhesives were applied according to their respective manufacturer's instructions for microTBS measurement after storage in water at 37 degrees C for 24 hours or for TEM interfacial characterization. The microTBS varied from 11.1 to 63.6 MPa; the highest bond strengths were obtained with the three-step etch&rinse adhesives and the lowest with one-step self-etch adhesives. TEM evaluation showed very different interaction patterns, especially for the self-etch adhesives. "Mild" self-etch adhesives demineralized the dentin surface sufficiently to provide micro-mechanical retention, while preserving hydroxyapatite within the hybrid layer to enable additional chemical interaction. When bonded to dentin, the adhesives with simplified application procedures (in particular, one-step self-etch adhesives) still underperform as compared to conventional three-step adhesives. "Mild" two-step self-etch adhesives that provide additional chemical bonding appear to most optimally combine bonding effectiveness with a simplified application protocol.

  19. Interfacial fracture toughness of different resin cements bonded to a lithium disilicate glass ceramic.

    Science.gov (United States)

    Hooshmand, Tabassom; Rostami, Golriz; Behroozibakhsh, Marjan; Fatemi, Mostafa; Keshvad, Alireza; van Noort, Richard

    2012-02-01

    To evaluate the effect of HF acid etching and silane treatment on the interfacial fracture toughness of a self-adhesive and two conventional resin-based cements bonded to a lithium disilicate glass ceramic. Lithium disilicate glass ceramic discs were prepared with two different surface preparations consisting of gritblasted with aluminium oxide, and gritblasted and etched with hydrofluoric acid. Ceramic surfaces with a chevron shaped circular hole were treated by an optimized silane treatment followed by an unfilled resin and then three different resin cements (Variolink II, Panavia F2, and Multilink Sprint). Specimens were kept in distilled water at 37°C for 24h and then subjected to thermocycling. The interfacial fracture toughness was measured and mode of failures was also examined. Data were analysed using analysis of variance followed by T-test analysis. No statistically significant difference in the mean fracture toughness values between the gritblasted and gritblasted and etched surfaces for Variolink II resin cement was found (P>0.05). For the gritblasted ceramic surfaces, no significant difference in the mean fracture toughness values between Panavia F2 and Variolink II was observed (P>0.05). For the gritblasted and etched ceramic surfaces, a significantly higher fracture toughness for Panavia F2 than the other cements was found (Pcements demonstrated a better bonding efficacy to the lithium disilicate glass ceramic compared to the self-adhesive resin cement. The lithium disilicate glass ceramic surfaces should be gritblasted and etched to get the best bond when used with Panavia F2 and Multilink Sprint resin cements, whereas for the Variolink II only gritblasting is required. The best bond overall is achieved with Panavia F2. Copyright © 2011 Elsevier Ltd. All rights reserved.

  20. Mission Exploitation Platform PROBA-V

    Science.gov (United States)

    Goor, Erwin

    2016-04-01

    VITO and partners developed an end-to-end solution to drastically improve the exploitation of the PROBA-V EO-data archive (http://proba-v.vgt.vito.be/), the past mission SPOT-VEGETATION and derived vegetation parameters by researchers, service providers and end-users. The analysis of time series of data (+1PB) is addressed, as well as the large scale on-demand processing of near real-time data. From November 2015 an operational Mission Exploitation Platform (MEP) PROBA-V, as an ESA pathfinder project, will be gradually deployed at the VITO data center with direct access to the complete data archive. Several applications will be released to the users, e.g. - A time series viewer, showing the evolution of PROBA-V bands and derived vegetation parameters for any area of interest. - Full-resolution viewing services for the complete data archive. - On-demand processing chains e.g. for the calculation of N-daily composites. - A Virtual Machine will be provided with access to the data archive and tools to work with this data, e.g. various toolboxes and support for R and Python. After an initial release in January 2016, a research platform will gradually be deployed allowing users to design, debug and test applications on the platform. From the MEP PROBA-V, access to Sentinel-2 and landsat data will be addressed as well, e.g. to support the Cal/Val activities of the users. Users can make use of powerful Web based tools and can self-manage virtual machines to perform their work on the infrastructure at VITO with access to the complete data archive. To realise this, private cloud technology (openStack) is used and a distributed processing environment is built based on Hadoop. The Hadoop ecosystem offers a lot of technologies (Spark, Yarn, Accumulo, etc.) which we integrate with several open-source components. The impact of this MEP on the user community will be high and will completely change the way of working with the data and hence open the large time series to a larger