Tools for Genetic Studies in Experimental Populations of Polyploids

Directory of Open Access Journals (Sweden)

Peter M. Bourke

2018-04-01

Full Text Available Polyploid organisms carry more than two copies of each chromosome, a condition rarely tolerated in animals but which occurs relatively frequently in the plant kingdom. One of the principal challenges faced by polyploid organisms is to evolve stable meiotic mechanisms to faithfully transmit genetic information to the next generation upon which the study of inheritance is based. In this review we look at the tools available to the research community to better understand polyploid inheritance, many of which have only recently been developed. Most of these tools are intended for experimental populations (rather than natural populations, facilitating genomics-assisted crop improvement and plant breeding. This is hardly surprising given that a large proportion of domesticated plant species are polyploid. We focus on three main areas: (1 polyploid genotyping; (2 genetic and physical mapping; and (3 quantitative trait analysis and genomic selection. We also briefly review some miscellaneous topics such as the mode of inheritance and the availability of polyploid simulation software. The current polyploid analytic toolbox includes software for assigning marker genotypes (and in particular, estimating the dosage of marker alleles in the heterozygous condition, establishing chromosome-scale linkage phase among marker alleles, constructing (short-range haplotypes, generating linkage maps, performing genome-wide association studies (GWAS and quantitative trait locus (QTL analyses, and simulating polyploid populations. These tools can also help elucidate the mode of inheritance (disomic, polysomic or a mixture of both as in segmental allopolyploids or reveal whether double reduction and multivalent chromosomal pairing occur. An increasing number of polyploids (or associated diploids are being sequenced, leading to publicly available reference genome assemblies. Much work remains in order to keep pace with developments in genomic technologies. However, such

Tools for Genetic Studies in Experimental Populations of Polyploids.

Science.gov (United States)

Bourke, Peter M; Voorrips, Roeland E; Visser, Richard G F; Maliepaard, Chris

2018-01-01

Polyploid organisms carry more than two copies of each chromosome, a condition rarely tolerated in animals but which occurs relatively frequently in the plant kingdom. One of the principal challenges faced by polyploid organisms is to evolve stable meiotic mechanisms to faithfully transmit genetic information to the next generation upon which the study of inheritance is based. In this review we look at the tools available to the research community to better understand polyploid inheritance, many of which have only recently been developed. Most of these tools are intended for experimental populations (rather than natural populations), facilitating genomics-assisted crop improvement and plant breeding. This is hardly surprising given that a large proportion of domesticated plant species are polyploid. We focus on three main areas: (1) polyploid genotyping; (2) genetic and physical mapping; and (3) quantitative trait analysis and genomic selection. We also briefly review some miscellaneous topics such as the mode of inheritance and the availability of polyploid simulation software. The current polyploid analytic toolbox includes software for assigning marker genotypes (and in particular, estimating the dosage of marker alleles in the heterozygous condition), establishing chromosome-scale linkage phase among marker alleles, constructing (short-range) haplotypes, generating linkage maps, performing genome-wide association studies (GWAS) and quantitative trait locus (QTL) analyses, and simulating polyploid populations. These tools can also help elucidate the mode of inheritance (disomic, polysomic or a mixture of both as in segmental allopolyploids) or reveal whether double reduction and multivalent chromosomal pairing occur. An increasing number of polyploids (or associated diploids) are being sequenced, leading to publicly available reference genome assemblies. Much work remains in order to keep pace with developments in genomic technologies. However, such technologies

Developing neutronics calculation tools for MYRRHA

International Nuclear Information System (INIS)

Van den Eynde, G.

2006-01-01

The design of the Accelerator Driven System MYRRHA requires adequate and specialised tools in the field of neutronics calculations. In order to fill the gaps, several PhD programmes were launched. In 2005 three such PhD projects were running. Each of them focuses on different stages in the computation of a core of MYRRHA. The first project I mprovements of the spallation reaction model , a collaboration with the University of Liege, deals with the characterisation of the spallation neutron source using the INCL (Intra-Nuclear Cascade of Liege) model. Since at high energies, nuclear data are sparse, calculations rely on models. Especially for spallation reactions that occur at proton energies of several hundreds of MeV, models are the only means to evaluate the spallation source in MYRRHA. The second project 'Neutron transport with anisotropic scattering', a collaboration with the Universite Libre de Bruxelles, works on the development of a neutronics code, CASE-BSM, for systems with highly anisotropic scattering. The presence in large amounts of both lead and bismuth atoms in the MYRRHA core results in a highly anisotropic scattering of the neutrons in the bulk of the coolant. Neglecting this effect has large consequences on both global parameters, like keff, as well as on local parameters, like the neutron flux seen by the vessel. The third project, 'ALEPH: An integrated Monte Carlo bun-up tool', a collaboration with Ghent University, treats the last phase of a core calculation: the depletion of the fuel during irradiation. For an experimental machine like MYRRHA it is of utmost importance to have a fast calculational tool to evaluate the incineration of both isotopes present in the fuel as isotopes present in experimental devices. The main objective is to improve the current quality of the neutronics codes focused on ADS applications and to have this knowledge 'in-house'

Development and Application of a Tool for Optimizing Composite Matrix Viscoplastic Material Parameters

Science.gov (United States)

Murthy, Pappu L. N.; Naghipour Ghezeljeh, Paria; Bednarcyk, Brett A.

2018-01-01

This document describes a recently developed analysis tool that enhances the resident capabilities of the Micromechanics Analysis Code with the Generalized Method of Cells (MAC/GMC) and its application. MAC/GMC is a composite material and laminate analysis software package developed at NASA Glenn Research Center. The primary focus of the current effort is to provide a graphical user interface (GUI) capability that helps users optimize highly nonlinear viscoplastic constitutive law parameters by fitting experimentally observed/measured stress-strain responses under various thermo-mechanical conditions for braided composites. The tool has been developed utilizing the MATrix LABoratory (MATLAB) (The Mathworks, Inc., Natick, MA) programming language. Illustrative examples shown are for a specific braided composite system wherein the matrix viscoplastic behavior is represented by a constitutive law described by seven parameters. The tool is general enough to fit any number of experimentally observed stress-strain responses of the material. The number of parameters to be optimized, as well as the importance given to each stress-strain response, are user choice. Three different optimization algorithms are included: (1) Optimization based on gradient method, (2) Genetic algorithm (GA) based optimization and (3) Particle Swarm Optimization (PSO). The user can mix and match the three algorithms. For example, one can start optimization with either 2 or 3 and then use the optimized solution to further fine tune with approach 1. The secondary focus of this paper is to demonstrate the application of this tool to optimize/calibrate parameters for a nonlinear viscoplastic matrix to predict stress-strain curves (for constituent and composite levels) at different rates, temperatures and/or loading conditions utilizing the Generalized Method of Cells. After preliminary validation of the tool through comparison with experimental results, a detailed virtual parametric study is

Environmental tools in product development

DEFF Research Database (Denmark)

Wenzel, Henrik; Hauschild, Michael Zwicky; Jørgensen, Jørgen

1994-01-01

A precondition for design of environmentally friendly products is that the design team has access to methods and tools supporting the introduction of environmental criteria in product development. A large Danish program, EDIP, is being carried out by the Institute for Product Development, Technical...... University of Denmark, in cooperation with 5 major Danish companies aiming at the development and testing of such tools. These tools are presented in this paper...

Development of an interpretive simulation tool for the proton radiography technique

Science.gov (United States)

Levy, M. C.; Ryutov, D. D.; Wilks, S. C.; Ross, J. S.; Huntington, C. M.; Fiuza, F.; Martinez, D. A.; Kugland, N. L.; Baring, M. G.; Park, H.-S.

2015-03-01

Proton radiography is a useful diagnostic of high energy density (HED) plasmas under active theoretical and experimental development. In this paper, we describe a new simulation tool that interacts realistic laser-driven point-like proton sources with three dimensional electromagnetic fields of arbitrary strength and structure and synthesizes the associated high resolution proton radiograph. The present tool's numerical approach captures all relevant physics effects, including effects related to the formation of caustics. Electromagnetic fields can be imported from particle-in-cell or hydrodynamic codes in a streamlined fashion, and a library of electromagnetic field "primitives" is also provided. This latter capability allows users to add a primitive, modify the field strength, rotate a primitive, and so on, while quickly generating a high resolution radiograph at each step. In this way, our tool enables the user to deconstruct features in a radiograph and interpret them in connection to specific underlying electromagnetic field elements. We show an example application of the tool in connection to experimental observations of the Weibel instability in counterstreaming plasmas, using ˜108 particles generated from a realistic laser-driven point-like proton source, imaging fields which cover volumes of ˜10 mm3. Insights derived from this application show that the tool can support understanding of HED plasmas.

Development and application of modeling tools for sodium fast reactor inspection

Energy Technology Data Exchange (ETDEWEB)

Le Bourdais, Florian; Marchand, Benoît; Baronian, Vahan [CEA LIST, Centre de Saclay F-91191 Gif-sur-Yvette (France)

2014-02-18

To support the development of in-service inspection methods for the Advanced Sodium Test Reactor for Industrial Demonstration (ASTRID) project led by the French Atomic Energy Commission (CEA), several tools that allow situations specific to Sodium cooled Fast Reactors (SFR) to be modeled have been implemented in the CIVA software and exploited. This paper details specific applications and results obtained. For instance, a new specular reflection model allows the calculation of complex echoes from scattering structures inside the reactor vessel. EMAT transducer simulation models have been implemented to develop new transducers for sodium visualization and imaging. Guided wave analysis tools have been developed to permit defect detection in the vessel shell. Application examples and comparisons with experimental data are presented.

Intermediate Experimental Vehicle, ESA Program IXV ATDB Tool and Aerothermodynamic Characterization

Science.gov (United States)

Mareschi, Vincenzo; Ferrarella, Daniela; Zaccagnino, Elio; Tribot, Jean-Pierre; Vallee, Jean-Jacques; Haya-Ramos, Rodrigo; Rufolo, Giuseppe; Mancuso, Salvatore

2011-05-01

In the complex domain of the space technologies and among the different applications available in Europe, a great interest has been placed since several years in the development of re-entry technologies. Among the different achievements obtained in that field it is to be recalled the experience of the Atmospheric Re-entry Vehicle flight in 1998 and a certain number of important investments per-formed at Agency and national levels like Hermes, MSTP, Festip, X-38, FLPP, TRP, GSTP, HSTS, AREV, Pre-X. IXV (Intermediate eXperimental V ehicle) builds on these past experiences and studies and it is conceived to be the next technological step forward with respect to ARD With respect to previous European ballistic or quasi- ballistic demonstrators, IXV will have an increased in- flight manoeuvrability and the planned mission will allow verifying the performances of the required technologies against a wider re-entry corridor. This will imply from the pure technological aspect to increase the level of engagement on critical technologies and disciplines like aerodynamics/aerothermodynamics, guidance, navigation, control, thermal protection materials and in flight measurements. In order to support the TPS design and the other sub- systems, an AeroThermodynamicDataBase Tool has been developed by Dassault Aviation and integrated by Thales Alenia Space with the Functional Engineering Simulator (used for GNC performances evaluation) in order to characterize the aerothermodynamic behaviour of the vehicle. This paper will describe: - The methodology used to develop the ATDB tool, based on the processing of CFD computations and WTT campaigns results. - The utilization of the ATDB tool, by means of its integration into the System process. - The methodology used for the aerothermal characterization of IXV.

Windows Developer Power Tools Turbocharge Windows development with more than 170 free and open source tools

CERN Document Server

Avery, James

2007-01-01

Software developers need to work harder and harder to bring value to their development process in order to build high quality applications and remain competitive. Developers can accomplish this by improving their productivity, quickly solving problems, and writing better code. A wealth of open source and free software tools are available for developers who want to improve the way they create, build, deploy, and use software. Tools, components, and frameworks exist to help developers at every point in the development process. Windows Developer Power Tools offers an encyclopedic guide to m

System analysis: Developing tools for the future

Energy Technology Data Exchange (ETDEWEB)

De Jong, K.; clever, J.; Draper, J.V.; Davies, B.; Lonks, A.

1996-02-01

This report introduces and evaluates system analysis tools that were developed, or are under development, for the Robotics Technology Development Program (RTDP). Additionally, it discusses system analysis work completed using these tools aimed at completing a system analysis of the retrieval of waste from underground storage tanks on the Hanford Reservation near Richland, Washington. The tools developed and evaluated include a mixture of commercially available tools adapted to RTDP requirements, and some tools developed in house. The tools that are included in this report include: a Process Diagramming Tool, a Cost Modeling Tool, an Amortization Modeling Tool, a graphical simulation linked to the Cost Modeling Tool, a decision assistance tool, and a system thinking tool. Additionally, the importance of performance testing to the RTDP and the results of such testing executed is discussed. Further, the results of the Tank Waste Retrieval (TWR) System Diagram, the TWR Operations Cost Model, and the TWR Amortization Model are presented, and the implication of the results are discussed. Finally, the RTDP system analysis tools are assessed and some recommendations are made regarding continuing development of the tools and process.

On transform coding tools under development for VP10

Science.gov (United States)

Parker, Sarah; Chen, Yue; Han, Jingning; Liu, Zoe; Mukherjee, Debargha; Su, Hui; Wang, Yongzhe; Bankoski, Jim; Li, Shunyao

2016-09-01

Google started the WebM Project in 2010 to develop open source, royaltyfree video codecs designed specifically for media on the Web. The second generation codec released by the WebM project, VP9, is currently served by YouTube, and enjoys billions of views per day. Realizing the need for even greater compression efficiency to cope with the growing demand for video on the web, the WebM team embarked on an ambitious project to develop a next edition codec, VP10, that achieves at least a generational improvement in coding efficiency over VP9. Starting from VP9, a set of new experimental coding tools have already been added to VP10 to achieve decent coding gains. Subsequently, Google joined a consortium of major tech companies called the Alliance for Open Media to jointly develop a new codec AV1. As a result, the VP10 effort is largely expected to merge with AV1. In this paper, we focus primarily on new tools in VP10 that improve coding of the prediction residue using transform coding techniques. Specifically, we describe tools that increase the flexibility of available transforms, allowing the codec to handle a more diverse range or residue structures. Results are presented on a standard test set.

Development of Next Generation Multiphase Pipe Flow Prediction Tools

Energy Technology Data Exchange (ETDEWEB)

Cem Sarica; Holden Zhang

2006-05-31

The developments of oil and gas fields in deep waters (5000 ft and more) will become more common in the future. It is inevitable that production systems will operate under multiphase flow conditions (simultaneous flow of gas, oil and water possibly along with sand, hydrates, and waxes). Multiphase flow prediction tools are essential for every phase of hydrocarbon recovery from design to operation. Recovery from deep-waters poses special challenges and requires accurate multiphase flow predictive tools for several applications, including the design and diagnostics of the production systems, separation of phases in horizontal wells, and multiphase separation (topside, seabed or bottom-hole). It is crucial for any multiphase separation technique, either at topside, seabed or bottom-hole, to know inlet conditions such as flow rates, flow patterns, and volume fractions of gas, oil and water coming into the separation devices. Therefore, the development of a new generation of multiphase flow predictive tools is needed. The overall objective of the proposed study is to develop a unified model for gas-oil-water three-phase flow in wells, flow lines, and pipelines to predict flow characteristics such as flow patterns, phase distributions, and pressure gradient encountered during petroleum production at different flow conditions (pipe diameter and inclination, fluid properties and flow rates). In the current multiphase modeling approach, flow pattern and flow behavior (pressure gradient and phase fractions) prediction modeling are separated. Thus, different models based on different physics are employed, causing inaccuracies and discontinuities. Moreover, oil and water are treated as a pseudo single phase, ignoring the distinct characteristics of both oil and water, and often resulting in inaccurate design that leads to operational problems. In this study, a new model is being developed through a theoretical and experimental study employing a revolutionary approach. The

Experimental anti-GBM disease as a tool for studying spontaneous lupus nephritis.

Science.gov (United States)

Fu, Yuyang; Du, Yong; Mohan, Chandra

2007-08-01

Lupus nephritis is an immune-mediated disease, where antibodies and T cells both play pathogenic roles. Since spontaneous lupus nephritis in mouse models takes 6-12 months to manifest, there is an urgent need for a mouse model that can be used to delineate the pathogenic processes that lead to immune nephritis, over a quicker time frame. We propose that the experimental anti-glomerular basement membrane (GBM) disease model might be a suitable tool for uncovering some of the molecular steps underlying lupus nephritis. This article reviews the current evidence that supports the use of the experimental anti-GBM nephritis model for studying spontaneous lupus nephritis. Importantly, out of about 25 different molecules that have been specifically examined in the experimental anti-GBM model and also spontaneous lupus nephritis, all influence both diseases concordantly, suggesting that the experimental model might be a useful tool for unraveling the molecular basis of spontaneous lupus nephritis. This has important clinical implications, both from the perspective of genetic susceptibility as well as clinical therapeutics.

Development of thick wall welding and cutting tools for ITER

International Nuclear Information System (INIS)

Nakahira, Masataka; Takahashi, Hiroyuki; Akou, Kentaro; Koizumi, Koichi

1998-01-01

The Vacuum Vessel, which is a core component of International Thermonuclear Experimental Reactor (ITER), is required to be exchanged remotely in a case of accident such as superconducting coil failure. The in-vessel components such as blanket and divertor are planned to be exchanged or fixed. In these exchange or maintenance operations, the thick wall welding and cutting are inevitable and remote handling tools are necessary. The thick wall welding and cutting tools for blanket are under developing in the ITER R and D program. The design requirement is to weld or cut the stainless steel of 70 mm thickness in the narrow space. Tungsten inert gas (TIG) arc welding, plasma cutting and iodine laser welding/cutting are selected as primary option. Element welding and cutting tests, design of small tools to satisfy space requirement, test fabrication and performance tests were performed. This paper reports the tool design and overview of welding and cutting tests. (author)

Development of thick wall welding and cutting tools for ITER

Energy Technology Data Exchange (ETDEWEB)

Nakahira, Masataka; Takahashi, Hiroyuki; Akou, Kentaro; Koizumi, Koichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-04-01

The Vacuum Vessel, which is a core component of International Thermonuclear Experimental Reactor (ITER), is required to be exchanged remotely in a case of accident such as superconducting coil failure. The in-vessel components such as blanket and divertor are planned to be exchanged or fixed. In these exchange or maintenance operations, the thick wall welding and cutting are inevitable and remote handling tools are necessary. The thick wall welding and cutting tools for blanket are under developing in the ITER R and D program. The design requirement is to weld or cut the stainless steel of 70 mm thickness in the narrow space. Tungsten inert gas (TIG) arc welding, plasma cutting and iodine laser welding/cutting are selected as primary option. Element welding and cutting tests, design of small tools to satisfy space requirement, test fabrication and performance tests were performed. This paper reports the tool design and overview of welding and cutting tests. (author)

Development of a Scale-up Tool for Pervaporation Processes

Directory of Open Access Journals (Sweden)

Holger Thiess

2018-01-01

Full Text Available In this study, an engineering tool for the design and optimization of pervaporation processes is developed based on physico-chemical modelling coupled with laboratory/mini-plant experiments. The model incorporates the solution-diffusion-mechanism, polarization effects (concentration and temperature, axial dispersion, pressure drop and the temperature drop in the feed channel due to vaporization of the permeating components. The permeance, being the key model parameter, was determined via dehydration experiments on a mini-plant scale for the binary mixtures ethanol/water and ethyl acetate/water. A second set of experimental data was utilized for the validation of the model for two chemical systems. The industrially relevant ternary mixture, ethanol/ethyl acetate/water, was investigated close to its azeotropic point and compared to a simulation conducted with the determined binary permeance data. Experimental and simulation data proved to agree very well for the investigated process conditions. In order to test the scalability of the developed engineering tool, large-scale data from an industrial pervaporation plant used for the dehydration of ethanol was compared to a process simulation conducted with the validated physico-chemical model. Since the membranes employed in both mini-plant and industrial scale were of the same type, the permeance data could be transferred. The comparison of the measured and simulated data proved the scalability of the derived model.

Systematic Development of Miniaturized (Bio)Processes using Process Systems Engineering (PSE) Methods and Tools

DEFF Research Database (Denmark)

Krühne, Ulrich; Larsson, Hilde; Heintz, Søren

2014-01-01

The focus of this work is on process systems engineering (PSE) methods and tools, and especially on how such PSE methods and tools can be used to accelerate and support systematic bioprocess development at a miniature scale. After a short presentation of the PSE methods and the bioprocess...... development drivers, three case studies are presented. In the first example it is demonstrated how experimental investigations of the bi-enzymatic production of lactobionic acid can be modeled with help of a new mechanistic mathematical model. The reaction was performed at lab scale and the prediction quality...

Large scale experiments as a tool for numerical model development

DEFF Research Database (Denmark)

Kirkegaard, Jens; Hansen, Erik Asp; Fuchs, Jesper

2003-01-01

Experimental modelling is an important tool for study of hydrodynamic phenomena. The applicability of experiments can be expanded by the use of numerical models and experiments are important for documentation of the validity of numerical tools. In other cases numerical tools can be applied...

Comparison of the most used game development tools

OpenAIRE

Soukup, Martin

2017-01-01

This thesis deals with comparison of most used game development tools. Author places game development tools in context of today´s game industry, analyses state of the market and the latest trends in the field of game development tools. The largest part of this thesis is aimed at comparing game development tools, where five tools are selected, overviewed and compared by specified criteria. Author demonstrates several basic features of chosen game development tool on development of a simple And...

Development of an interpretive simulation tool for the proton radiography technique

Energy Technology Data Exchange (ETDEWEB)

Levy, M. C., E-mail: levymc@stanford.edu [Clarendon Laboratory, University of Oxford, Parks Road, Oxford OX1 3PU (United Kingdom); Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); Ryutov, D. D.; Wilks, S. C.; Ross, J. S.; Huntington, C. M.; Fiuza, F.; Martinez, D. A.; Park, H.-S. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); Kugland, N. L. [Lam Research Corporation, 4400 Cushing Parkway, Fremont, California 94538 (United States); Baring, M. G. [Department of Physics and Astronomy, Rice University, Houston, Texas 77005 (United States)

2015-03-15

Proton radiography is a useful diagnostic of high energy density (HED) plasmas under active theoretical and experimental development. In this paper, we describe a new simulation tool that interacts realistic laser-driven point-like proton sources with three dimensional electromagnetic fields of arbitrary strength and structure and synthesizes the associated high resolution proton radiograph. The present tool’s numerical approach captures all relevant physics effects, including effects related to the formation of caustics. Electromagnetic fields can be imported from particle-in-cell or hydrodynamic codes in a streamlined fashion, and a library of electromagnetic field “primitives” is also provided. This latter capability allows users to add a primitive, modify the field strength, rotate a primitive, and so on, while quickly generating a high resolution radiograph at each step. In this way, our tool enables the user to deconstruct features in a radiograph and interpret them in connection to specific underlying electromagnetic field elements. We show an example application of the tool in connection to experimental observations of the Weibel instability in counterstreaming plasmas, using ∼10{sup 8} particles generated from a realistic laser-driven point-like proton source, imaging fields which cover volumes of ∼10 mm{sup 3}. Insights derived from this application show that the tool can support understanding of HED plasmas.

Special remote tooling developed and utilized to tighten TFTR TF coil casing bolts

International Nuclear Information System (INIS)

Burgess, T.W.; Walton, G.R.; Meighan, T.G.; Paul, B.L.

1993-01-01

Special tooling has been developed and used to tighten toroidal field (TF) coil casing bolts that have loosened from years of Tokamak Fusion Test Reactor (TFTR) operation. Due to their location, many of the TF casing bolts cannot be directly accessed or viewed; their condition was first discovered during unrelated inspections in 1988. Engineering solutions were, sought until 1992, when a remotely operated wrench concept was successfully demonstrated on a TF coil mockup. The concept was developed into several working tools that have successfully been applied to tighten several thousand TF casing bolts during recent scheduled outages. This effort has improved the integrity and reliability of the TF coil system in preparing for the final experimental phase of the TFTR. This paper discusses the design and application of this tooling

Developing a Modeling Tool Using Eclipse

NARCIS (Netherlands)

Kirtley, Nick; Waqas Kamal, Ahmad; Avgeriou, Paris

2008-01-01

Tool development using an open source platform provides autonomy to users to change, use, and develop cost-effective software with freedom from licensing requirements. However, open source tool development poses a number of challenges, such as poor documentation and continuous evolution. In this

Developing a Social Media Marketing tool

OpenAIRE

Valova, Olga

2015-01-01

The objective of the thesis is to develop a better, easier to use social media marketing tool that could be utilised in any business. By understanding and analysing how business uses social media as well as currently available social media marketing tools, design a tool with the maximum amount of features, but with a simple and intuitive User Interface. An agile software development life cycle was used throughout the creation of the tool. Qualitative analysis was used to analyse existing ...

EUV source development for high-volume chip manufacturing tools

Science.gov (United States)

Stamm, Uwe; Yoshioka, Masaki; Kleinschmidt, Jürgen; Ziener, Christian; Schriever, Guido; Schürmann, Max C.; Hergenhan, Guido; Borisov, Vladimir M.

2007-03-01

Xenon-fueled gas discharge produced plasma (DPP) sources were integrated into Micro Exposure Tools already in 2004. Operation of these tools in a research environment gave early learning for the development of EUV sources for Alpha and Beta-Tools. Further experiments with these sources were performed for basic understanding on EUV source technology and limits, especially the achievable power and reliability. The intermediate focus power of Alpha-Tool sources under development is measured to values above 10 W. Debris mitigation schemes were successfully integrated into the sources leading to reasonable collector mirror lifetimes with target of 10 billion pulses due to the effective debris flux reduction. Source collector mirrors, which withstand the radiation and temperature load of Xenon-fueled sources, have been developed in cooperation with MediaLario Technologies to support intermediate focus power well above 10 W. To fulfill the requirements for High Volume chip Manufacturing (HVM) applications, a new concept for HVM EUV sources with higher efficiency has been developed at XTREME technologies. The discharge produced plasma (DPP) source concept combines the use of rotating disk electrodes (RDE) with laser exited droplet targets. The source concept is called laser assisted droplet RDE source. The fuel of these sources has been selected to be Tin. The conversion efficiency achieved with the laser assisted droplet RDE source is 2-3x higher compared to Xenon. Very high pulse energies well above 200 mJ / 2π sr have been measured with first prototypes of the laser assisted droplet RDE source. If it is possible to maintain these high pulse energies at higher repetition rates a 10 kHz EUV source could deliver 2000 W / 2π sr. According to the first experimental data the new concept is expected to be scalable to an intermediate focus power on the 300 W level.

Modal Analysis and Experimental Determination of Optimum Tool Shank Overhang of a Lathe Machine

Directory of Open Access Journals (Sweden)

Nabin SARDAR

2008-12-01

Full Text Available Vibration of Tool Shank of a cutting tool has large influence on tolerances and surface finish of products. Frequency and amplitude of vibrations depend on the overhang of the shank of the cutting tool. In turning operations, when the tool overhang is about 2 times of the tool height, the amplitude of the vibration is almost zero and dimensional tolerances and surface finish of the product becomes high. In this paper, the above statement is verified firstly by using a finite element analysis of the cutting tool with ANSYS software package and secondly, with experimental verification with a piezoelectric sensor.

Development of a surrogate model for elemental analysis using a natural gamma ray spectroscopy tool

International Nuclear Information System (INIS)

Zhang, Qiong

2015-01-01

A systematic computational method for obtaining accurate elemental standards efficiently for varying borehole conditions was developed based on Monte Carlo simulations, surrogate modeling, and data assimilation. Elemental standards are essential for spectral unfolding in formation evaluation applications commonly used for nuclear well logging tools. Typically, elemental standards are obtained by standardized measurements, but these experiments are expensive and lack the flexibility to address different logging conditions. In contrast, computer-based Monte Carlo simulations provide an accurate and more flexible approach to obtaining elemental standards for formation evaluation. The presented computational method recognizes that in contrast to typical neutron–photon simulations, where the source is typically artificial and well characterized (Galford, 2009), an accurate knowledge of the source is essential for matching the obtained Monte Carlo elemental standards with their experimental counterparts. Therefore, source distributions are adjusted to minimize the L2 difference of the Monte Carlo computed and experimental standards. Subsequently, an accurate surrogate model is developed accounting for different casing and cement thicknesses, and tool positions within the borehole. The adjusted source distributions are then utilized to generate and validate spectra for varying borehole conditions: tool position, casing and cement thickness. The effect of these conditions on the spectra are investigated and discussed in this work. Given that Monte Carlo modeling provides much lower cost and more flexibility, employing Monte Carlo could enhance the processing of nuclear tool logging data computed standards. - Highlights: • A novel computational model for efficiently computing elemental standards for varying borehole conditions has been developed. • A model of an experimental test pit was implemented in the Monte Carlo code GEANT4 for computing elemental standards. �

Experimental research on the durability cutting tools for cutting-off steel profiles

Directory of Open Access Journals (Sweden)

Cristea Alexandru

2017-01-01

Full Text Available The production lines used for manufacturing U-shaped profiles are very complex and they must have high productivity. One of the most important stages of the fabrication process is the cutting-off. This paper presents the experimental research and analysis of the durability of the cutting tools used for cutting-off U-shaped metal steel profiles. The results of this work can be used to predict the durability of the cutting tools.

Screening of Gas-Cooled Reactor Thermal-Hydraulic and Safety Analysis Tools and Experimental Database

International Nuclear Information System (INIS)

Lee, Won Jae; Kim, Min Hwan; Lee, Seung Wook

2007-08-01

This report is a final report of I-NERI Project, 'Screening of Gas-cooled Reactor Thermal Hydraulic and Safety Analysis Tools and Experimental Database 'jointly carried out by KAERI, ANL and INL. In this study, we developed the basic technologies required to develop and validate the VHTR TH/safety analysis tools and evaluated the TH/safety database information. The research tasks consist of; 1) code qualification methodology (INL), 2) high-level PIRTs for major nucleus set of events (KAERI, ANL, INL), 3) initial scaling and scoping analysis (ANL, KAERI, INL), 4) filtering of TH/safety tools (KAERI, INL), 5) evaluation of TH/safety database information (KAERI, INL, ANL) and 6) key scoping analysis (KAERI). The code qualification methodology identifies the role of PIRTs in the R and D process and the bottom-up and top-down code validation methods. Since the design of VHTR is still evolving, we generated the high-level PIRTs referencing 600MWth block-type GT-MHR and 400MWth pebble-type PBMR. Nucleus set of events that represents the VHTR safety and operational transients consists of the enveloping scenarios of HPCC (high pressure conduction cooling: loss of primary flow), LPCC/Air-Ingress (low pressure conduction cooling: loss of coolant), LC (load changes: power maneuvering), ATWS (anticipated transients without scram: reactivity insertion), WS (water ingress: water-interfacing system break) and HU (hydrogen-side upset: loss of heat sink). The initial scaling analysis defines dimensionless parameters that need to be reflected in mixed convection modeling and the initial scoping analysis provided the reference system transients used in the PIRTs generation. For the PIRTs phenomena, we evaluated the modeling capability of the candidate TH/safety tools and derived a model improvement need. By surveying and evaluating the TH/safety database information, a tools V and V matrix has been developed. Through the key scoping analysis using available database, the modeling

Screening of Gas-Cooled Reactor Thermal-Hydraulic and Safety Analysis Tools and Experimental Database

Energy Technology Data Exchange (ETDEWEB)

Lee, Won Jae; Kim, Min Hwan; Lee, Seung Wook (and others)

2007-08-15

This report is a final report of I-NERI Project, 'Screening of Gas-cooled Reactor Thermal Hydraulic and Safety Analysis Tools and Experimental Database 'jointly carried out by KAERI, ANL and INL. In this study, we developed the basic technologies required to develop and validate the VHTR TH/safety analysis tools and evaluated the TH/safety database information. The research tasks consist of; 1) code qualification methodology (INL), 2) high-level PIRTs for major nucleus set of events (KAERI, ANL, INL), 3) initial scaling and scoping analysis (ANL, KAERI, INL), 4) filtering of TH/safety tools (KAERI, INL), 5) evaluation of TH/safety database information (KAERI, INL, ANL) and 6) key scoping analysis (KAERI). The code qualification methodology identifies the role of PIRTs in the R and D process and the bottom-up and top-down code validation methods. Since the design of VHTR is still evolving, we generated the high-level PIRTs referencing 600MWth block-type GT-MHR and 400MWth pebble-type PBMR. Nucleus set of events that represents the VHTR safety and operational transients consists of the enveloping scenarios of HPCC (high pressure conduction cooling: loss of primary flow), LPCC/Air-Ingress (low pressure conduction cooling: loss of coolant), LC (load changes: power maneuvering), ATWS (anticipated transients without scram: reactivity insertion), WS (water ingress: water-interfacing system break) and HU (hydrogen-side upset: loss of heat sink). The initial scaling analysis defines dimensionless parameters that need to be reflected in mixed convection modeling and the initial scoping analysis provided the reference system transients used in the PIRTs generation. For the PIRTs phenomena, we evaluated the modeling capability of the candidate TH/safety tools and derived a model improvement need. By surveying and evaluating the TH/safety database information, a tools V and V matrix has been developed. Through the key scoping analysis using available database, the

Game development tool essentials

CERN Document Server

Berinstein, Paula; Ardolino, Alessandro; Franco, Simon; Herubel, Adrien; McCutchan, John; Nedelcu, Nicusor; Nitschke, Benjamin; Olmstead, Don; Robinet, Fabrice; Ronchi, Christian; Turkowski, Rita; Walter, Robert; Samour, Gustavo

2014-01-01

Offers game developers new techniques for streamlining the critical game tools pipeline. Inspires game developers to share their secrets and improve the productivity of the entire industry. Helps game industry practitioners compete in a hyper-competitive environment.

Developing a learning analytics tool

DEFF Research Database (Denmark)

Wahl, Christian; Belle, Gianna; Clemmensen, Anita Lykke

This poster describes how learning analytics and collective intelligence can be combined in order to develop a tool for providing support and feedback to learners and teachers regarding students self-initiated learning activities.......This poster describes how learning analytics and collective intelligence can be combined in order to develop a tool for providing support and feedback to learners and teachers regarding students self-initiated learning activities....

History of a secondary side inspection tooling development

International Nuclear Information System (INIS)

Harris, W.

2012-01-01

This presentation provides a brief history (1980 to present day) of steam generator secondary side tooling requirements, tooling development, tooling available today and how and where this tooling has been implemented for steam generator secondary side inspections. History of Tooling Development discussion covers the relatively short time period from when the SGSS tooling was required and why as well the associated challenges with development through present day; Available Tooling discussion covers the actual tooling available today, locations in the steam generator where the tooling is used and how the tooling works; Implementation discussion covers where in the world this tooling has been deployed as well the benefits the tooling has provided. (author)

Developing a Parametric Urban Design Tool

DEFF Research Database (Denmark)

Steinø, Nicolai; Obeling, Esben

2014-01-01

Parametric urban design is a potentially powerful tool for collaborative urban design processes. Rather than making one- off designs which need to be redesigned from the ground up in case of changes, parametric design tools make it possible keep the design open while at the same time allowing...... for a level of detailing which is high enough to facilitate an understan- ding of the generic qualities of proposed designs. Starting from a brief overview of parametric design, this paper presents initial findings from the development of a parametric urban design tool with regard to developing a structural...... logic which is flexible and expandable. It then moves on to outline and discuss further development work. Finally, it offers a brief reflection on the potentials and shortcomings of the software – CityEngine – which is used for developing the parametric urban design tool....

Using Electronic Communication Tools in Online Group Activities to Develop Collaborative Learning Skills

Science.gov (United States)

Khalil, Hanan; Ebner, Martin

2017-01-01

The purpose of this study was to investigate the effect of using synchronous and asynchronous communication tools in online group activities to develop collaborative learning skills. An experimental study was implemented on a sample of faculty of education students in Mansoura University. The sample was divided into two groups, a group studied…

Smartphones as Experimental Tools: Different Methods to Determine the Gravitational Acceleration in Classroom Physics by Using Everyday Devices

Science.gov (United States)

Kuhn, Jochen; Vogt, Patrik

2013-01-01

New media technology becomes more and more important for our daily life as well as for teaching physics. Within the scope of our N.E.T. research project we develop experiments using New Media Experimental Tools (N.E.T.) in physics education and study their influence on students learning abilities. We want to present the possibilities e.g. of…

Video Analysis of Projectile Motion Using Tablet Computers as Experimental Tools

Science.gov (United States)

Klein, P.; Gröber, S.; Kuhn, J.; Müller, A.

2014-01-01

Tablet computers were used as experimental tools to record and analyse the motion of a ball thrown vertically from a moving skateboard. Special applications plotted the measurement data component by component, allowing a simple determination of initial conditions and "g" in order to explore the underlying laws of motion. This experiment…

Workshop on Software Development Tools for Petascale Computing

Energy Technology Data Exchange (ETDEWEB)

Vetter, Jeffrey [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Georgia Inst. of Technology, Atlanta, GA (United States)

2007-08-01

Petascale computing systems will soon be available to the DOE science community. Recent studies in the productivity of HPC platforms point to better software environments as a key enabler to science on these systems. To prepare for the deployment and productive use of these petascale platforms, the DOE science and general HPC community must have the software development tools, such as performance analyzers and debuggers that meet application requirements for scalability, functionality, reliability, and ease of use. In this report, we identify and prioritize the research opportunities in the area of software development tools for high performance computing. To facilitate this effort, DOE hosted a group of 55 leading international experts in this area at the Software Development Tools for PetaScale Computing (SDTPC) Workshop, which was held in Washington, D.C. on August 1 and 2, 2007. Software development tools serve as an important interface between the application teams and the target HPC architectures. Broadly speaking, these roles can be decomposed into three categories: performance tools, correctness tools, and development environments. Accordingly, this SDTPC report has four technical thrusts: performance tools, correctness tools, development environment infrastructures, and scalable tool infrastructures. The last thrust primarily targets tool developers per se, rather than end users. Finally, this report identifies non-technical strategic challenges that impact most tool development. The organizing committee emphasizes that many critical areas are outside the scope of this charter; these important areas include system software, compilers, and I/O.

Understanding organometallic reaction mechanisms and catalysis experimental and computational tools computational and experimental tools

CERN Document Server

Ananikov, Valentin P

2014-01-01

Exploring and highlighting the new horizons in the studies of reaction mechanisms that open joint application of experimental studies and theoretical calculations is the goal of this book. The latest insights and developments in the mechanistic studies of organometallic reactions and catalytic processes are presented and reviewed. The book adopts a unique approach, exemplifying how to use experiments, spectroscopy measurements, and computational methods to reveal reaction pathways and molecular structures of catalysts, rather than concentrating solely on one discipline. The result is a deeper

78 FR 68459 - Medical Device Development Tools; Draft Guidance for Industry, Tool Developers, and Food and Drug...

Science.gov (United States)

2013-11-14

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-D-1279] Medical Device Development Tools; Draft Guidance for Industry, Tool Developers, and Food and Drug Administration Staff; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food...

EXPERIMENTAL INVESTIGATION OF THE TOOL-CHIP INTERFACE TMPERATURES ON UNCOATED CEMENTIDE CARBIDE CUTTING TOOLS

Directory of Open Access Journals (Sweden)

Kasım HABALI

2005-01-01

Full Text Available It is known that the temperature as the result of the heat developed during machining at the tool-chip interface has an influence on the tool life and workpiece surface guality and the methods for measuring this temperature are constantly under investigation. In this study, the measurement of tool-chip interface temperature using toolworkpiece termocouple method was investigated. The test were carried out on a AISI 1040 steel and the toolchip interface temperature variation was examined depending on the cutting speed and feed rate. The obtained groups show that cutting speed has more influence on the temperature than feedrate has.

Development of a transportation planning tool

International Nuclear Information System (INIS)

Funkhouser, B.R.; Moyer, J.W.; Ballweg, E.L.

1994-01-01

This paper describes the application of simulation modeling and logistics techniques to the development of a planning tool for the Department of Energy (DOE). The focus of the Transportation Planning Model (TPM) tool is to aid DOE and Sandia analysts in the planning of future fleet sizes, driver and support personnel sizes, base site locations, and resource balancing among the base sites. The design approach is to develop a rapid modeling environment which will allow analysts to easily set up a shipment scenario and perform multiple ''what if'' evaluations. The TPM is being developed on personal computers using commercial off-the shelf (COTS) software tools under the WINDOWS reg-sign operating environment. Prototype development of the TPM has been completed

Development of a User Interface for a Regression Analysis Software Tool

Science.gov (United States)

Ulbrich, Norbert Manfred; Volden, Thomas R.

2010-01-01

An easy-to -use user interface was implemented in a highly automated regression analysis tool. The user interface was developed from the start to run on computers that use the Windows, Macintosh, Linux, or UNIX operating system. Many user interface features were specifically designed such that a novice or inexperienced user can apply the regression analysis tool with confidence. Therefore, the user interface s design minimizes interactive input from the user. In addition, reasonable default combinations are assigned to those analysis settings that influence the outcome of the regression analysis. These default combinations will lead to a successful regression analysis result for most experimental data sets. The user interface comes in two versions. The text user interface version is used for the ongoing development of the regression analysis tool. The official release of the regression analysis tool, on the other hand, has a graphical user interface that is more efficient to use. This graphical user interface displays all input file names, output file names, and analysis settings for a specific software application mode on a single screen which makes it easier to generate reliable analysis results and to perform input parameter studies. An object-oriented approach was used for the development of the graphical user interface. This choice keeps future software maintenance costs to a reasonable limit. Examples of both the text user interface and graphical user interface are discussed in order to illustrate the user interface s overall design approach.

The HMGU thoron experimental house: A new tool for exposure assessment

International Nuclear Information System (INIS)

Tschiersch, J.; Meisenberg, O.

2010-01-01

A thoron experimental house was constructed in a laboratory room of Helmholtz Zentrum Muenchen to perform exposure studies of thoron and its decay products under controlled conditions. The single room house (7.1 m 3 ) was built from unfired clay stones and clay plaster. For the plaster of the inner side, the clay was mixed with granite powder enriched with 232 Th. The thoron inventory increased by this means to about 1700 Bq and the progeny potential alpha energy to 130 μJ inside the room. The instrumentation of the experimental house includes active and passive devices for thoron and thoron decay product measurement including attached and unattached progeny, for aerosol particle number and size measurement and characterisation of the climatic conditions. Various parameters as ventilation rate and aerosol concentration can be adjusted. Experiments performed in the experimental house demonstrate the experimental power of this new tool for indoor thoron exposure assessment 2010. (authors)

Epistemology and expectations survey about experimental physics: Development and initial results

Directory of Open Access Journals (Sweden)

Benjamin M. Zwickl

2014-06-01

Full Text Available In response to national calls to better align physics laboratory courses with the way physicists engage in research, we have developed an epistemology and expectations survey to assess how students perceive the nature of physics experiments in the contexts of laboratory courses and the professional research laboratory. The Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS evaluates students’ epistemology at the beginning and end of a semester. Students respond to paired questions about how they personally perceive doing experiments in laboratory courses and how they perceive an experimental physicist might respond regarding their research. Also, at the end of the semester, the E-CLASS assesses a third dimension of laboratory instruction, students’ reflections on their course’s expectations for earning a good grade. By basing survey statements on widely embraced learning goals and common critiques of teaching labs, the E-CLASS serves as an assessment tool for lab courses across the undergraduate curriculum and as a tool for physics education research. We present the development, evidence of validation, and initial formative assessment results from a sample that includes 45 classes at 20 institutions. We also discuss feedback from instructors and reflect on the challenges of large-scale online administration and distribution of results.

Android development tools for Eclipse

CERN Document Server

Shah, Sanjay

2013-01-01

A standard tutorial aimed at developing Android applications in a practical manner.Android Development Tools for Eclipse is aimed at beginners and existing developers who want to learn more about Android development. It is assumed that you have experience in Java programming and that you have used IDE for development.

Pilot evaluation of a continuing professional development tool for developing leadership skills.

Science.gov (United States)

Patterson, Brandon J; Chang, Elizabeth H; Witry, Matthew J; Garza, Oscar W; Trewet, CoraLynn B

2013-01-01

Strategies are needed to assure essential nonclinical competencies, such as leadership, can be gained using a continuing professional development (CPD) framework. The objective of this study was to explore student pharmacists' utilization and perceived effectiveness of a CPD tool for leadership development in an elective course. Students completed 2 CPD cycles during a semester-long leadership elective using a CPD tool. A questionnaire was used to measure students' perceptions of utility, self-efficacy, and satisfaction in completing CPD cycles when using a tool to aid in this process. The CPD tool was completed twice by 7 students. On average, students spent nearly 5 hours per CPD cycle. More than half (57.1%) scored themselves as successful or very successful in achieving their learning plans, and most (71.4%) found the tool somewhat useful in developing their leadership skills. Some perceived that the tool provided a systematic way to engage in leadership development, whereas others found it difficult to use. In this pilot study, most student pharmacists successfully achieved a leadership development plan and found the CPD tool useful. Providing students with more guidance may help facilitate use and effectiveness of CPD tools. There is a need to continue to develop and refine tools that assist in the CPD of pharmacy practitioners at all levels. Copyright © 2013 Elsevier Inc. All rights reserved.

Developing a MATLAB(registered)-Based Tool for Visualization and Transformation

Science.gov (United States)

Anderton, Blake J.

2003-01-01

An important step in the structural design and development of spacecraft is the experimental identification of a structure s modal characteristics, such as its natural frequencies and modes of vibration. These characteristics are vital to developing a representative model of any given structure or analyzing the range of input frequencies that can be handled by a particular structure. When setting up such a representative model of a structure, careful measurements using precision equipment (such as accelerometers and instrumented hammers) must be made on many individual points of the structure in question. The coordinate location of each data point is used to construct a wireframe geometric model of the structure. Response measurements obtained from the accelerometers is used to generate the modal shapes of the particular structure. Graphically, this is displayed as a combination of the ways a structure will ideally respond to a specified force input. Two types of models of the tested structure are often used in modal analysis: an analytic model showing expected behavior of the structure, and an experimental model showing measured results due to observed phenomena. To evaluate the results from the experimental model, a comparison of analytic and experimental results must be made between the two models. However, comparisons between these two models become difficult when the two coordinate orientations differ in a manner such that results are displayed in an unclear fashion. Such a problem proposes the need for a tool that not only communicates a graphical image of a structure s wireframe geometry based on various measurement locations (called nodes), but also allows for a type of transformation of the image s coordinate geometry so that a model s coordinate orientation is made to match the orientation of another model. Such a tool should also be designed so that it is able to construct coordinate geometry based on many different listings of node locations and is able

Remote tool development for nuclear dismantling operations

International Nuclear Information System (INIS)

Craig, G.; Ferlay, J.C.; Ieracitano, F.

2003-01-01

Remote tool systems to undertake nuclear dismantling operations require careful design and development not only to perform their given duty but to perform it safely within the constraints imposed by harsh environmental conditions. Framatome ANP NUCLEAR SERVICES has for a long time developed and qualified equipment to undertake specific maintenance operations of nuclear reactors. The tool development methodology from this activity has since been adapted to resolve some very challenging reactor dismantling operations which are demonstrated in this paper. Each nuclear decommissioning project is a unique case, technical characterisation data is generally incomplete. The development of the dismantling methodology and associated equipment is by and large an iterative process combining design and simulation with feasibility and validation testing. The first stage of the development process involves feasibility testing of industrial tools and examining adaptations necessary to control and deploy the tool remotely with respect to the chosen methodology and environmental constraints. This results in a prototype tool and deployment system to validate the basic process. The second stage involves detailed design which integrates any remaining technical and environmental constraints. At the end of this stage, tools and deployment systems, operators and operating procedures are qualified on full scale mock ups. (authors)

TRIP-ID: A tool for a smart and interactive identification of Magic Formula tyre model parameters from experimental data acquired on track or test rig

Science.gov (United States)

Farroni, Flavio; Lamberti, Raffaele; Mancinelli, Nicolò; Timpone, Francesco

2018-03-01

Tyres play a key role in ground vehicles' dynamics because they are responsible for traction, braking and cornering. A proper tyre-road interaction model is essential for a useful and reliable vehicle dynamics model. In the last two decades Pacejka's Magic Formula (MF) has become a standard in simulation field. This paper presents a Tool, called TRIP-ID (Tyre Road Interaction Parameters IDentification), developed to characterize and to identify with a high grade of accuracy and reliability MF micro-parameters from experimental data deriving from telemetry or from test rig. The tool guides interactively the user through the identification process on the basis of strong diagnostic considerations about the experimental data made evident by the tool itself. A motorsport application of the tool is shown as a case study.

Capitalizing on App Development Tools and Technologies

Science.gov (United States)

Luterbach, Kenneth J.; Hubbell, Kenneth R.

2015-01-01

Instructional developers and others creating apps must choose from a wide variety of app development tools and technologies. Some app development tools have incorporated visual programming features, which enable some drag and drop coding and contextual programming. While those features help novices begin programming with greater ease, questions…

Quality Appraisal of Single-Subject Experimental Designs: An Overview and Comparison of Different Appraisal Tools

Science.gov (United States)

Wendt, Oliver; Miller, Bridget

2012-01-01

Critical appraisal of the research literature is an essential step in informing and implementing evidence-based practice. Quality appraisal tools that assess the methodological quality of experimental studies provide a means to identify the most rigorous research suitable for evidence-based decision-making. In single-subject experimental research,…

Development of remote handling tools and equipment

International Nuclear Information System (INIS)

Nakahira, Masataka; Oka, Kiyoshi; Taguchi, Kou; Ito, Akira; Fukatsu, Seiichi; Oda, Yasushi; Kajiura, Soji; Yamazaki, Seiichiro; Aoyama, Kazuo.

1997-01-01

The remote handling (RH) tools and equipment development in ITER focuses mainly on the welding and cutting technique, weld inspection and double-seal door which are essential factors in the replacement of in-vessel components such as divertor and blanket. The conceptual design of these RH tools and equipment has been defined through ITER engineering design activity (EDA). Similarly, elementary R and D of the RH tools and equipment have been extensively performed to accumulate a technological data base for process and performance qualification. Based on this data, fabrications of full-scale RH tools and equipment are under progress. A prototypical bore tool for pipe welding and cutting has already been fabricated and is currently undergoing integrated performance tests. This paper describes the design outline of the RH tools and equipment related to in-vessel components maintenance, and highlights the current status of RH tools and equipment development by the Japan Home Team as an ITER R and D program. This paper also includes an outline of insulation joint and quick-pipe connector development, which has also been conducted through the ITER R and D program in order to standardize RH operations and components. (author)

Diamond and cBN hybrid and nanomodified cutting tools with enhanced performance: Development, testing and modelling

DEFF Research Database (Denmark)

Loginov, Pavel; Mishnaevsky, Leon; Levashov, Evgeny

2015-01-01

with 25% of diamond replaced by cBN grains demonstrate 20% increased performance as compared with pure diamond machining tools, and more than two times higher performance as compared with pure cBN tools. Further, cast iron machining efficiency of the wheels modified by hBN particles was 80% more efficient......The potential of enhancement of superhard steel and cast iron cutting tool performance on the basis of microstuctural modifications of the tool materials is studied. Hybrid machining tools with mixed diamond and cBN grains, as well as machining tool with composite nanomodified metallic binder...... are developed, and tested experimentally and numerically. It is demonstrated that both combination of diamond and cBN (hybrid structure) and nanomodification of metallic binder (with hexagonal boron nitride/hBN platelets) lead to sufficient improvement of the cast iron machining performance. The superhard tools...

Develop risk-based procurement management tools for SMEs

NARCIS (Netherlands)

Staal, Anne; Hagelaar, Geoffrey; Walhof, Gert; Holman, Richard

2016-01-01

This paper provides guidance for developing risk-based management tools to improve the procurement (purchasing) performance of SMEs. Extant academic literature only offers little support on developing such tools and does not consider the wide variety of SMEs. The paper defines a procurement tool for

Musculoskeletal Model Development of the Elbow Joint with an Experimental Evaluation

Directory of Open Access Journals (Sweden)

Munsur Rahman

2018-04-01

Full Text Available A dynamic musculoskeletal model of the elbow joint in which muscle, ligament, and articular surface contact forces are predicted concurrently would be an ideal tool for patient-specific preoperative planning, computer-aided surgery, and rehabilitation. Existing musculoskeletal elbow joint models have limited clinical applicability because of idealizing the elbow as a mechanical hinge joint or ignoring important soft tissue (e.g., cartilage contributions. The purpose of this study was to develop a subject-specific anatomically correct musculoskeletal elbow joint model and evaluate it based on experimental kinematics and muscle electromyography measurements. The model included three-dimensional bone geometries, a joint constrained by multiple ligament bundles, deformable contacts, and the natural oblique wrapping of ligaments. The musculoskeletal model predicted the bone kinematics reasonably accurately in three different velocity conditions. The model predicted timing and number of muscle excitations, and the normalized muscle forces were also in agreement with the experiment. The model was able to predict important in vivo parameters that are not possible to measure experimentally, such as muscle and ligament forces, and cartilage contact pressure. In addition, the developed musculoskeletal model was computationally efficient for body-level dynamic simulation. The maximum computation time was less than 30 min for our 35 s simulation. As a predictive clinical tool, the potential medical applications for this model and modeling approach are significant.

Applying CASE Tools for On-Board Software Development

Science.gov (United States)

Brammer, U.; Hönle, A.

For many space projects the software development is facing great pressure with respect to quality, costs and schedule. One way to cope with these challenges is the application of CASE tools for automatic generation of code and documentation. This paper describes two CASE tools: Rhapsody (I-Logix) featuring UML and ISG (BSSE) that provides modeling of finite state machines. Both tools have been used at Kayser-Threde in different space projects for the development of on-board software. The tools are discussed with regard to the full software development cycle.

Development of Next Generation Multiphase Pipe Flow Prediction Tools

Energy Technology Data Exchange (ETDEWEB)

Tulsa Fluid Flow

2008-08-31

The developments of fields in deep waters (5000 ft and more) is a common occurrence. It is inevitable that production systems will operate under multiphase flow conditions (simultaneous flow of gas-oil-and water possibly along with sand, hydrates, and waxes). Multiphase flow prediction tools are essential for every phase of the hydrocarbon recovery from design to operation. The recovery from deep-waters poses special challenges and requires accurate multiphase flow predictive tools for several applications including the design and diagnostics of the production systems, separation of phases in horizontal wells, and multiphase separation (topside, seabed or bottom-hole). It is very crucial to any multiphase separation technique that is employed either at topside, seabed or bottom-hole to know inlet conditions such as the flow rates, flow patterns, and volume fractions of gas, oil and water coming into the separation devices. The overall objective was to develop a unified model for gas-oil-water three-phase flow in wells, flow lines, and pipelines to predict the flow characteristics such as flow patterns, phase distributions, and pressure gradient encountered during petroleum production at different flow conditions (pipe diameter and inclination, fluid properties and flow rates). The project was conducted in two periods. In Period 1 (four years), gas-oil-water flow in pipes were investigated to understand the fundamental physical mechanisms describing the interaction between the gas-oil-water phases under flowing conditions, and a unified model was developed utilizing a novel modeling approach. A gas-oil-water pipe flow database including field and laboratory data was formed in Period 2 (one year). The database was utilized in model performance demonstration. Period 1 primarily consisted of the development of a unified model and software to predict the gas-oil-water flow, and experimental studies of the gas-oil-water project, including flow behavior description and

Technical Optimization of Cross-Platform Software Development Process quality and Usability of 3rd-Party Tools

Directory of Open Access Journals (Sweden)

Yevgueny Kondratyev

2016-03-01

Full Text Available The article exposes developer's point of view on minimizing creation, upgrade, post-release problem solving time for applications and components, targeted to multiple operating systems, while keeping high end product quality and computational performance. Non-uniformity of analogous tools and components, available on different platforms, causes strong impact on developer's productivity. In part., differences in 3rd-party component interfaces, versions, quality of distinct functions, cause frequent switching developer's attention on issues not connected (in principle with the target project. While loss of development performance because of attention specifics is more subjective value, at least physical time spent on tools/components misbehavior compensation and normal tools configuring is measurable. So, the main thesis verified is whether it's possible to increase continuity of the development process by technical improvements only, and by which value. In addition, a novel experimental tool for interactive code execution is described, allowing for deep changes in the working program without its restart. Question under research: minimizing durations of programming-build-test-correct loop and small code parts runs, in part., improving the debugging workflow for the account of combining the interactive editor and the debugger.

Developing new chemical tools for solvent extraction

International Nuclear Information System (INIS)

Moyer, B.A.; Baes, C.F.; Burns, J.H.; Case, G.N.; Sachleben, R.A.; Bryan, S.A.; Lumetta, G.J.; McDowell, W.J.; Sachleben, R.A.

1993-01-01

Prospects for innovation and for greater technological impact in the field of solvent extraction (SX) seem as bright as ever, despite the maturation of SX as an economically significant separation method and as an important technique in the laboratory. New industrial, environmental, and analytical problems provide compelling motivation for diversifying the application of SX, developing new solvent systems, and seeking improved properties. Toward this end, basic research must be dedicated to enhancing the tools of SX: physical tools for probing the basis of extraction and molecular tools for developing new SX chemistries. In this paper, the authors describe their progress in developing and applying the general tools of equilibrium analysis and of ion recognition in SX. Nearly half a century after the field of SX began in earnest, coordination chemistry continues to provide the impetus for important advancements in understanding SX systems and in controlling SX chemistry. In particular, the physical tools of equilibrium analysis, X-ray crystallography, and spectroscopy are elucidating the molecular basis of SX in unprecedented detail. Moreover, the principles of ion recognition are providing the molecular tools with which to achieve new selectivities and new applications

Monte Carlo simulation - a powerful tool to support experimental activities in structure reliability

International Nuclear Information System (INIS)

Yuritzinn, T.; Chapuliot, S.; Eid, M.; Masson, R.; Dahl, A.; Moinereau, D.

2003-01-01

Monte-Carlo Simulation (MCS) can have different uses in supporting structure reliability investigations and assessments. In this paper we focus our interest on the use of MCS as a numerical tool to support the fitting of the experimental data related to toughness experiments. (authors)

Development and Validation of a Rubric for Diagnosing Students’ Experimental Design Knowledge and Difficulties

Science.gov (United States)

Dasgupta, Annwesa P.; Anderson, Trevor R.

2014-01-01

It is essential to teach students about experimental design, as this facilitates their deeper understanding of how most biological knowledge was generated and gives them tools to perform their own investigations. Despite the importance of this area, surprisingly little is known about what students actually learn from designing biological experiments. In this paper, we describe a rubric for experimental design (RED) that can be used to measure knowledge of and diagnose difficulties with experimental design. The development and validation of the RED was informed by a literature review and empirical analysis of undergraduate biology students’ responses to three published assessments. Five areas of difficulty with experimental design were identified: the variable properties of an experimental subject; the manipulated variables; measurement of outcomes; accounting for variability; and the scope of inference appropriate for experimental findings. Our findings revealed that some difficulties, documented some 50 yr ago, still exist among our undergraduate students, while others remain poorly investigated. The RED shows great promise for diagnosing students’ experimental design knowledge in lecture settings, laboratory courses, research internships, and course-based undergraduate research experiences. It also shows potential for guiding the development and selection of assessment and instructional activities that foster experimental design. PMID:26086658

Final Report, DOE Early Career Award: Predictive modeling of complex physical systems: new tools for statistical inference, uncertainty quantification, and experimental design

Energy Technology Data Exchange (ETDEWEB)

Marzouk, Youssef [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2016-08-31

Predictive simulation of complex physical systems increasingly rests on the interplay of experimental observations with computational models. Key inputs, parameters, or structural aspects of models may be incomplete or unknown, and must be developed from indirect and limited observations. At the same time, quantified uncertainties are needed to qualify computational predictions in the support of design and decision-making. In this context, Bayesian statistics provides a foundation for inference from noisy and limited data, but at prohibitive computional expense. This project intends to make rigorous predictive modeling *feasible* in complex physical systems, via accelerated and scalable tools for uncertainty quantification, Bayesian inference, and experimental design. Specific objectives are as follows: 1. Develop adaptive posterior approximations and dimensionality reduction approaches for Bayesian inference in high-dimensional nonlinear systems. 2. Extend accelerated Bayesian methodologies to large-scale {\\em sequential} data assimilation, fully treating nonlinear models and non-Gaussian state and parameter distributions. 3. Devise efficient surrogate-based methods for Bayesian model selection and the learning of model structure. 4. Develop scalable simulation/optimization approaches to nonlinear Bayesian experimental design, for both parameter inference and model selection. 5. Demonstrate these inferential tools on chemical kinetic models in reacting flow, constructing and refining thermochemical and electrochemical models from limited data. Demonstrate Bayesian filtering on canonical stochastic PDEs and in the dynamic estimation of inhomogeneous subsurface properties and flow fields.

Experimental Object-Oriented Modelling

DEFF Research Database (Denmark)

Hansen, Klaus Marius

through, e.g., technical prototyping and active user involvement. We introduce and examine “experimental object-oriented modelling” as the intersection of these practices. The contributions of this thesis are expected to be within three perspectives on models and modelling in experimental system...... development: Grounding We develop an empirically based conceptualization of modelling and use of models in system development projects characterized by a high degree of uncertainty in requirements and point to implications for tools and techniques for modelling in such a setting. Techniques We introduce......This thesis examines object-oriented modelling in experimental system development. Object-oriented modelling aims at representing concepts and phenomena of a problem domain in terms of classes and objects. Experimental system development seeks active experimentation in a system development project...

Engineering tools for interior tyre tread pattern noise

NARCIS (Netherlands)

Bekke, Dirk

2014-01-01

The regular tyre tread pattern design process is often based upon experience and experimental evaluations and may take about 2 years. The use of engineering tooling could improve and speed up this process. The research objective is therefore to develop experimental and simulation tooling by which

Developing a 300C Analog Tool for EGS

Energy Technology Data Exchange (ETDEWEB)

Normann, Randy

2015-03-23

This paper covers the development of a 300°C geothermal well monitoring tool for supporting future EGS (enhanced geothermal systems) power production. This is the first of 3 tools planed. This is an analog tool designed for monitoring well pressure and temperature. There is discussion on 3 different circuit topologies and the development of the supporting surface electronics and software. There is information on testing electronic circuits and component. One of the major components is the cable used to connect the analog tool to the surface.

Development of Simulator Configuration Tool

International Nuclear Information System (INIS)

Nedrelid, Olav; Pettersen, Geir

1996-01-01

The main objective of the development of a Simulator Configuration Tool (SCT) is to achieve faster and more efficient production of dynamic simulators. Through application of versatile graphical interfaces, the simulator builder should be able to configure different types of simulators including full-scope process simulators. The SCT should be able to serve different simulator environments. The configuration tool communicates with simulator execution environments through a TCP/IP-based interface, Communication with a Model Server System developed at Institutt for energiteknikk has been established and used as test case. The system consists of OSF/Motif dialogues for operations requiring textual input, list selections etc., and uses the Picasso-3 User Interface Management System to handle presentation of static and dynamic graphical information. (author)

Artificial intelligence tool development and applications to nuclear power

International Nuclear Information System (INIS)

Naser, J.A.

1987-01-01

Two parallel efforts are being performed at the Electric Power Research Institute (EPRI) to help the electric utility industry take advantage of the expert system technology. The first effort is the development of expert system building tools, which are tailored to electric utility industry applications. The second effort is the development of expert system applications. These two efforts complement each other. The application development tests the tools and identifies additional tool capabilities that are required. The tool development helps define the applications that can be successfully developed. Artificial intelligence, as demonstrated by the developments described is being established as a credible technological tool for the electric utility industry. The challenge to transferring artificial intelligence technology and an understanding of its potential to the electric utility industry is to gain an understanding of the problems that reduce power plant performance and identify which can be successfully addressed using artificial intelligence

Development of the major trauma case review tool.

Science.gov (United States)

Curtis, Kate; Mitchell, Rebecca; McCarthy, Amy; Wilson, Kellie; Van, Connie; Kennedy, Belinda; Tall, Gary; Holland, Andrew; Foster, Kim; Dickinson, Stuart; Stelfox, Henry T

2017-02-28

As many as half of all patients with major traumatic injuries do not receive the recommended care, with variance in preventable mortality reported across the globe. This variance highlights the need for a comprehensive process for monitoring and reviewing patient care, central to which is a consistent peer-review process that includes trauma system safety and human factors. There is no published, evidence-informed standardised tool that considers these factors for use in adult or paediatric trauma case peer-review. The aim of this research was to develop and validate a trauma case review tool to facilitate clinical review of paediatric trauma patient care in extracting information to facilitate monitoring, inform change and enable loop closure. Development of the trauma case review tool was multi-faceted, beginning with a review of the trauma audit tool literature. Data were extracted from the literature to inform iterative tool development using a consensus approach. Inter-rater agreement was assessed for both the pilot and finalised versions of the tool. The final trauma case review tool contained ten sections, including patient factors (such as pre-existing conditions), presenting problem, a timeline of events, factors contributing to the care delivery problem (including equipment, work environment, staff action, organizational factors), positive aspects of care and the outcome of panel discussion. After refinement, the inter-rater reliability of the human factors and outcome components of the tool improved with an average 86% agreement between raters. This research developed an evidence-informed tool for use in paediatric trauma case review that considers both system safety and human factors to facilitate clinical review of trauma patient care. This tool can be used to identify opportunities for improvement in trauma care and guide quality assurance activities. Validation is required in the adult population.

An empowerment-based approach to developing innovative e-health tools for self-management

NARCIS (Netherlands)

Alpay, L.; Boog, P. van der; Dumaij, A.

2011-01-01

E-health is seen as an important technological tool in achieving self-management; however, there is little evidence of how effective e-health is for self-management. Example tools remain experimental and there is limited knowledge yet about the design, use, and effects of this class of tools. By way

RADON PROGENY AS AN EXPERIMENTAL TOOL FOR DOSIMETRY OF NANOAEROSOLS

Energy Technology Data Exchange (ETDEWEB)

Ruzer, Lev; Ruzer, Lev S.; Apte, Michael G.

2008-02-25

The study of aerosol exposure and dosimetry measurements and related quantitation of health effects are important to the understanding of the consequences of air pollution, and are discussed widely in the scientific literature. During the last 10 years the need to correlate aerosol exposure and biological effects has become especially important due to rapid development of a new, revolutionary industry ?-- nanotechnology. Nanoproduct commerce is predicted to top $1 trillion by 2015. Quantitative assessment of aerosol particle behavior in air and in lung deposition, and dosimetry in different parts of the lung, particularly for nanoaerosols, remains poor despite several decades of study. Direct measurements on humans are still needed in order to validate the hollow cast, animal studies, and lung deposition modeling. We discuss here the use of nanoscale radon decay products as an experimental tool in the study of local deposition and lung dosimetry for nanoaerosols. The issue of the safe use of radon progeny in such measurements is discussed based on a comparison of measured exposure in 3 settings: general population, miners, and in a human experiment conducted at the Paul Scherer Institute (PSI) in Switzerland. One of the properties of radon progeny is that they consist partly of 1 nm radioactive particles called unattached activity; having extremely small size and high diffusion coefficients, these particles can be potentially useful as radioactive tracers in the study of nanometer-sized aerosols. We present a theoretical and experimental study of the correlation between the unattached activity and aerosol particle surface area, together with a description of its calibration and method for measurement of the unattached fraction.

Development of a core management tool for MYRRHA

International Nuclear Information System (INIS)

Jalůvka, David; Van den Eynde, Gert; Vandewalle, Stefan

2013-01-01

Highlights: • An in-core fuel management tool is being developed for the flexible irradiation machine MYRRHA. • Specific issues of the MYRRHA in-core fuel management are briefly discussed. • The tool addresses the loading pattern optimization problem. • Illustrative in-core fuel management optimization problems are solved using the tool. - Abstract: MYRRHA is an advanced multi-purpose irradiation facility under development at SCK• CEN in Mol, Belgium. In order to ensure an economical and safe operation of the reactor, an in-core fuel management tool is being developed within the project to address the loading pattern optimization problem. In the paper, the current version of the tool – its architecture and design, unique features, and the field of its application, are presented. In the second part of the paper, the tool’s capabilities are demonstrated on simple MYRRHA in-core fuel management optimization problems

Development of computerized risk management tool

International Nuclear Information System (INIS)

Kil Yoo Kim; Mee Jung Hwang; Seung Cheol Jang; Sang Hoon Han; Tae Woon Kim

1997-01-01

The author describes the kinds of efforts for the development of computerized risk management tool; (1) development of a risk monitor, Risk Monster, (2) improvement of McFarm (Missing Cutsets Finding Algorithm for Risk Monitor) and finally (3) development of reliability database management system, KwDBMan. Risk Monster supports for plant operators and maintenance schedulers to monitor plant risk and to avoid high peak risk by rearranging maintenance work schedule. Improved McFarm significantly improved calculation speed of Risk Monster for the cases of supporting system OOS (Out Of Service). KwDBMan manages event data, generic data and CCF (Common Cause Failure) data to support Risk Monster as well as PSA tool, KIRAP (KAERI Integrated Reliability Analysis Package)

Software development tools using GPGPU potentialities

International Nuclear Information System (INIS)

Dudnik, V.A.; Kudryavtsev, V.I.; Sereda, T.M.; Us, S.A.; Shestakov, M.V.

2011-01-01

The paper deals with potentialities of various up-to-date software development tools for making use of graphic processor (GPU) parallel computing resources. Examples are given to illustrate the use of present-day software tools for the development of applications and realization of algorithms for scientific-technical calculations performed by GPGPU. The paper presents some classes of hard mathematical problems of scientific-technical calculations, for which the GPGPU can be efficiently used. is possible. To reduce the time of calculation program development with the use of GPGPU capabilities, various dedicated programming systems and problem-oriented subroutine libraries are recommended. Performance parameters when solving the problems with and without the use of GPGPU potentialities are compared.

Comparative Investigation on Tool Wear during End Milling of AISI H13 Steel with Different Tool Path Strategies

Science.gov (United States)

Adesta, Erry Yulian T.; Riza, Muhammad; Avicena

2018-03-01

Tool wear prediction plays a significant role in machining industry for proper planning and control machining parameters and optimization of cutting conditions. This paper aims to investigate the effect of tool path strategies that are contour-in and zigzag tool path strategies applied on tool wear during pocket milling process. The experiments were carried out on CNC vertical machining centre by involving PVD coated carbide inserts. Cutting speed, feed rate and depth of cut were set to vary. In an experiment with three factors at three levels, Response Surface Method (RSM) design of experiment with a standard called Central Composite Design (CCD) was employed. Results obtained indicate that tool wear increases significantly at higher range of feed per tooth compared to cutting speed and depth of cut. This result of this experimental work is then proven statistically by developing empirical model. The prediction model for the response variable of tool wear for contour-in strategy developed in this research shows a good agreement with experimental work.

Development and experimental qualification of a calculation scheme for the evaluation of gamma heating in experimental reactors. Application to MARIA and Jules Horowitz (JHR) MTR Reactors

Energy Technology Data Exchange (ETDEWEB)

Tarchalski, M.; Pytel, K.; Wroblewska, M.; Marcinkowska, Z.; Boettcher, A.; Prokopowicz, R. [NCBJ Institute, MARIA Reactor, ul.Andrzeja Soltana 7, 05-400 Swierk (Poland); Sireta, P.; Gonnier, C.; Bignan, G. [CEA, DEN, Reactor Studies Department, Cadarache, F-13108 St-Paul-Lez-Durance (France); Lyoussi, A.; Fourmentel, D.; Barbot, L.; Villard, J.F.; Destouches, C. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 St-Paul-Lez-Durance (France); Reynard-Carette, C.; Brun, J. [Aix Marseille Universite, CNRS, Universite de Toulon, IM2NP UMR 7334, 13397, Marseille (France); Jagielski, J. [NCBJ Institute, MARIA Reactor, ul.Andrzeja Soltana 7, 05-400 Swierk (Poland); Institute of Electronic Materials Technolgy, Wolczynska 133, 01-919 Warszawa (Poland); Luks, A. [Institute of Heat Engineering, Nowowiejska 21/25, 00-665 Warsaw (Poland)

2015-07-01

Precise computational determination of nuclear heating which consists predominantly of gamma heating (more than 80 %) is one of the challenges in material testing reactor exploitation. Due to sophisticated construction and conditions of experimental programs planned in JHR it became essential to use most accurate and precise gamma heating model. Before the JHR starts to operate, gamma heating evaluation methods need to be developed and qualified in other experimental reactor facilities. This is done inter alia using OSIRIS, MINERVE or EOLE research reactors in France. Furthermore, MARIA - Polish material testing reactor - has been chosen to contribute to the qualification of gamma heating calculation schemes/tools. This reactor has some characteristics close to those of JHR (beryllium usage, fuel element geometry). To evaluate gamma heating in JHR and MARIA reactors, both simulation tools and experimental program have been developed and performed. For gamma heating simulation, new calculation scheme and gamma heating model of MARIA have been carried out using TRIPOLI4 and APOLLO2 codes. Calculation outcome has been verified by comparison to experimental measurements in MARIA reactor. To have more precise calculation results, model of MARIA in TRIPOLI4 has been made using the whole geometry of the core. This has been done for the first time in the history of MARIA reactor and was complex due to cut cone shape of all its elements. Material composition of burnt fuel elements has been implemented from APOLLO2 calculations. An experiment for nuclear heating measurements and calculation verification has been done in September 2014. This involved neutron, photon and nuclear heating measurements at selected locations in MARIA reactor using in particular Rh SPND, Ag SPND, Ionization Chamber (all three from CEA), KAROLINA calorimeter (NCBJ) and Gamma Thermometer (CEA/SCK CEN). Measurements were done in forty points using four channels. Maximal nuclear heating evaluated from

Experimental investigation into effect of cutting parameters on surface integrity of hardened tool steel

Science.gov (United States)

Bashir, K.; Alkali, A. U.; Elmunafi, M. H. S.; Yusof, N. M.

2018-04-01

Recent trend in turning hardened materials have gained popularity because of its immense machinability benefits. However, several machining processes like thermal assisted machining and cryogenic machining have reveal superior machinability benefits over conventional dry turning of hardened materials. Various engineering materials have been studied. However, investigations on AISI O1 tool steel have not been widely reported. In this paper, surface finish and surface integrity dominant when hard turning AISI O1 tool steel is analysed. The study is focused on the performance of wiper coated ceramic tool with respect to surface roughness and surface integrity of hardened tool steel. Hard turned tool steel was machined at varying cutting speed of 100, 155 and 210 m/min and feed rate of 0.05, 0.125 and 0.20mm/rev. The depth of cut of 0.2mm was maintained constant throughout the machining trials. Machining was conducted using dry turning on 200E-axis CNC lathe. The experimental study revealed that the surface finish is relatively superior at higher cutting speed of 210m/min. The surface finish increases when cutting speed increases whereas surface finish is generally better at lower feed rate of 0.05mm/rev. The experimental study conducted have revealed that phenomena such as work piece vibration due to poor or improper mounting on the spindle also contributed to higher surface roughness value of 0.66Ra during turning at 0.2mm/rev. Traces of white layer was observed when viewed with optical microscope which shows evidence of cutting effects on the turned work material at feed rate of 0.2 rev/min

Data Mining and Optimization Tools for Developing Engine Parameters Tools

Science.gov (United States)

Dhawan, Atam P.

1998-01-01

This project was awarded for understanding the problem and developing a plan for Data Mining tools for use in designing and implementing an Engine Condition Monitoring System. Tricia Erhardt and I studied the problem domain for developing an Engine Condition Monitoring system using the sparse and non-standardized datasets to be available through a consortium at NASA Lewis Research Center. We visited NASA three times to discuss additional issues related to dataset which was not made available to us. We discussed and developed a general framework of data mining and optimization tools to extract useful information from sparse and non-standard datasets. These discussions lead to the training of Tricia Erhardt to develop Genetic Algorithm based search programs which were written in C++ and used to demonstrate the capability of GA algorithm in searching an optimal solution in noisy, datasets. From the study and discussion with NASA LeRC personnel, we then prepared a proposal, which is being submitted to NASA for future work for the development of data mining algorithms for engine conditional monitoring. The proposed set of algorithm uses wavelet processing for creating multi-resolution pyramid of tile data for GA based multi-resolution optimal search.

VisTool: A user interface and visualization development system

DEFF Research Database (Denmark)

Xu, Shangjin

system – to simplify user interface development. VisTool allows user interface development without real programming. With VisTool a designer assembles visual objects (e.g. textboxes, ellipse, etc.) to visualize database contents. In VisTool, visual properties (e.g. color, position, etc.) can be formulas...... programming. However, in Software Engineering, software engineers who develop user interfaces do not follow it. In many cases, it is desirable to use graphical presentations, because a graphical presentation gives a better overview than text forms, and can improve task efficiency and user satisfaction....... However, it is more difficult to follow the classical usability approach for graphical presentation development. These difficulties result from the fact that designers cannot implement user interface with interactions and real data. We developed VisTool – a user interface and visualization development...

Software Development Methods and Tools: a New Zealand study

Directory of Open Access Journals (Sweden)

Chris Phillips

2005-05-01

Full Text Available This study is a more detailed follow-up to a preliminary investigation of the practices of software engineers in New Zealand. The focus of this study is on the methods and tools used by software developers in their current organisation. The project involved detailed questionnaires being piloted and sent out to several hundred software developers. A central part of the research involved the identification of factors affecting the use and take-up of existing software development tools in the workplace. The full spectrum of tools from fully integrated I-CASE tools to individual software applications, such as drawing tools was investigated. This paper describes the project and presents the findings.

Status of CONRAD, a nuclear reaction analysis tool

International Nuclear Information System (INIS)

Saint Jean, C. de; Habert, B.; Litaize, O.; Noguere, G.; Suteau, C.

2008-01-01

The development of a software tool (CONRAD) was initiated at CEA/Cadarache to give answers to various problems arising in the data analysis of nuclear reactions. This tool is then characterized by the handling of uncertainties from experimental values to covariance matrices for multi-group cross sections. An object oriented design was chosen allowing an easy interface with graphical tool for input/output data and being a natural framework for innovative nuclear models (Fission). The major achieved developments are a data model for describing channels, nuclear reactions, nuclear models and processes with interface to classical data formats, theoretical calculations for the resolved resonance range (Reich-Moore) and unresolved resonance range (Hauser-Feshbach, Gilbert-Cameron,...) with nuclear model parameters adjustment on experimental data sets and a Monte Carlo method based on conditional probabilities developed to calculate properly covariance matrices. The on-going developments deal with the experimental data description (covariance matrices) and the graphical user interface. (authors)

Development of bore tools for pipe inspection

Energy Technology Data Exchange (ETDEWEB)

Oka, Kiyoshi; Nakahira, Masataka; Taguchi, Kou; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-04-01

In the International Thermonuclear Reactor (ITER), replacement and maintenance on in-vessel components requires that all cooling pipes connected be cut and removed, that a new component be installed, and that all cooling pipes be rewelded. After welding is completed, welded area must be inspected for soundness. These tasks require a new work concept for securing shielded area and access from narrow ports. Tools had to be developed for nondestructive inspection and leak testing to evaluate pipe welding soundness by accessing areas from inside pipes using autonomous locomotion welding and cutting tools. A system was proposed for nondestructive inspection of branch pipes and the main pipe after passing through pipe curves, the same as for welding and cutting tool development. Nondestructive inspection and leak testing sensors were developed and the basic parameters were obtained. In addition, the inspection systems which can move inside pipes and conduct the nondestructive inspection and the leak testing were developed. In this paper, an introduction will be given to the current situation concerning the development of nondestructive inspection and leak testing machines for the branch pipes. (author)

Specialized case tools for the development of the accounting ...

African Journals Online (AJOL)

The paper presents an approach to building specialized CASE tools for the development of accounting applications. These tools form an integrated development environment allowing the computer aided development of the different applications in this field. This development environment consists of a formula interpreter, ...

Toward a Holistic Federated Future Internet Experimentation Environment: The Experience of NOVI Research and Experimentation

NARCIS (Netherlands)

Maglaris, V.; Papagianni, C.; Androulidakis, G.; Grammatikou, M.; Grosso, P.; van der Ham, J.; de Laat, C.; Pietrzak, B.; Belter, B.; Steger, J.; Laki, S.; Campanella, M.; Sallent, S.

This article presents the design and pilot implementation of a suite of intelligent methods, algorithms, and tools for federating heterogeneous experimental platforms (domains) toward a holistic Future Internet experimentation ecosystem. The proposed framework developed within the NOVI research and

Design and development of progressive tool for manufacturing washer

Science.gov (United States)

Annigeri, Ulhas K.; Raghavendra Ravi Kiran, K.; Deepthi, Y. P.

2017-07-01

In a progressive tool the raw material is worked at different station to finally fabricate the component. A progressive tool is a lucrative tool for mass production of components. A lot of automobile and other transport industries develop progressive tool for the production of components. The design of tool involves lot of planning and the same amount of skill of process planning is required in the fabrication of the tool. The design also involves use of thumb rules and standard elements as per experience gained in practice. Manufacturing the press tool is a laborious task as special jigs and fixtures have to be designed for the purpose. Assembly of all the press tool elements is another task where use of accurate measuring instruments for alignment of various tool elements is important. In the present study, design and fabrication of progressive press tool for production of washer has been developed and the press tool has been tried out on a mechanical type of press. The components produced are to dimensions.

Classical Experiments Revisited: Smartphones and Tablet PCs as Experimental Tools in Acoustics and Optics

Science.gov (United States)

Klein, P.; Hirth, M.; Gröber, S.; Kuhn, J.; Müller, A.

2014-01-01

Smartphones and tablets are used as experimental tools and for quantitative measurements in two traditional laboratory experiments for undergraduate physics courses. The Doppler effect is analyzed and the speed of sound is determined with an accuracy of about 5% using ultrasonic frequency and two smartphones, which serve as rotating sound emitter…

Information technology tools for curriculum development

NARCIS (Netherlands)

McKenney, Susan; Nieveen, N.M.; Strijker, A.; Voogt, Joke; Knezek, Gerald

2008-01-01

The widespread introduction and use of computers in the workplace began in the early 1990s. Since then, computer-based tools have been developed to support a myriad of task types, including the complex process of curriculum development. This chapter begins by briefly introducing two concepts that

Development of a tool for evaluating multimedia for surgical education.

Science.gov (United States)

Coughlan, Jane; Morar, Sonali S

2008-09-01

Educational multimedia has been designed to provide surgical trainees with expert operative information outside of the operating theater. The effectiveness of multimedia (e.g., CD-ROMs) for learning has been a common research topic since the 1990s. To date, however, little discussion has taken place on the mechanisms to evaluate the quality of multimedia-driven teaching. This may be because of a lack of research into the development of appropriate tools for evaluating multimedia, especially for surgical education. This paper reports on a small-scale pilot and exploratory study (n = 12) that developed a tool for surgical multimedia evaluation. The validity of the developed tool was established through adaptation of an existing tool, which was reviewed using experts in surgery, usability, and education. The reliability of the developed tool was tested with surgical trainees who used it to assess a multimedia CD-ROM created for teaching basic surgical skills. The findings contribute to an understanding of surgical trainees' experience of using educational multimedia, in terms of characteristics of the learning material for interface design and content and the process of developing evaluation tools, in terms of inclusion of appropriate assessment criteria. The increasing use of multimedia in medical education necessitates the development of standardized tools for determining the quality of teaching and learning. Little research exists into the development of such tools and so the present work stimulates discussion on how to evaluate surgical training.

Water Loss Management: Tools and Methods for Developing Countries

OpenAIRE

Mutikanga, H.E.

2012-01-01

Water utilities in developing countries are struggling to provide customers with a reliable level of service due to their peculiar water distribution characteristics including poorly zoned networks with irregular supply operating under restricted budgets. These unique conditions demand unique tools and methods for water loss control. Water loss management: Tools and Methods for Developing Countries provide a decision support toolbox (appropriate tools and methodologies) for assessing, quantif...

ICT tools for curriculum development

NARCIS (Netherlands)

McKenney, Susan; Nieveen, N.M.; van den Akker, J.J.H.; Kuiper, W.J.A.M.; Hameyer, U.

2003-01-01

Along with others in this book, this chapter examines a recent trend in curriculum development, namely, employing the computer to support this complex process. Not to be confused with the vast majority of ICT tools for education, which support the teachers and learners more directly, this discussion

Long range manipulator development and experiments with dismantling tools

International Nuclear Information System (INIS)

Mueller, K.

1993-01-01

An existing handling system (EMIR) was used as a carrier system for various tools for concrete dismantling and radiation protection monitoring. It combined the advantages of long reach and high payload with highly dexterous kinematics. This system was enhanced mechanically to allow the use of different tools. Tool attachment devices for automatic tool exchange were investigated as well as interfaces (electric, hydraulic, compressed air, cooling water and signals). The control system was improved with regard to accuracy and sensor data processing. Programmable logic controller functions for tool control were incorporated. A free field mockup of the EMIR was build that allowed close simulation of dismantling scenarios without radioactive inventory. Aged concrete was provided for the integration tests. The development scheduled included the basic concept investigation; the development of tools and sensors; the EMIR hardware enhancement including a tool exchange; the adaption of tools and mockup and the final evaluation of the system during experiments

Learn Xcode Tools for Mac OS X and iPhone Development

CERN Document Server

Piper, I

2010-01-01

This book will give you a thorough grounding in the principal and supporting tools and technologies that make up the Xcode Developer Tools suite. Apple has provided a comprehensive collection of developer tools, and this is the first book to examine the complete Apple programming environment for both Mac OS X and iPhone. * Comprehensive coverage of all the Xcode developer tools * Additional coverage of useful third-party development tools* Not just a survey of features, but a serious examination of the complete development process for Mac OS X and iPhone applications What you'll learn* The boo

Employability Skills Assessment Tool Development

Science.gov (United States)

Rasul, Mohamad Sattar; Rauf, Rose Amnah Abd; Mansor, Azlin Norhaini; Puvanasvaran, A. P.

2012-01-01

Research nationally and internationally found that technical graduates are lacking in employability skills. As employability skills are crucial in outcome-based education, the main goal of this research is to develop an Employability Skill Assessment Tool to help students and lecturers produce competent graduates in employability skills needed by…

DIDADTIC TOOLS FOR THE STUDENTS’ ALGORITHMIC THINKING DEVELOPMENT

Directory of Open Access Journals (Sweden)

T. P. Pushkaryeva

2017-01-01

Full Text Available Introduction. Modern engineers must possess high potential of cognitive abilities, in particular, the algorithmic thinking (AT. In this regard, the training of future experts (university graduates of technical specialities has to provide the knowledge of principles and ways of designing of various algorithms, abilities to analyze them, and to choose the most optimal variants for engineering activity implementation. For full formation of AT skills it is necessary to consider all channels of psychological perception and cogitative processing of educational information: visual, auditory, and kinesthetic.The aim of the present research is theoretical basis of design, development and use of resources for successful development of AT during the educational process of training in programming.Methodology and research methods. Methodology of the research involves the basic thesis of cognitive psychology and information approach while organizing the educational process. The research used methods: analysis; modeling of cognitive processes; designing training tools that take into account the mentality and peculiarities of information perception; diagnostic efficiency of the didactic tools. Results. The three-level model for future engineers training in programming aimed at development of AT skills was developed. The model includes three components: aesthetic, simulative, and conceptual. Stages to mastering a new discipline are allocated. It is proved that for development of AT skills when training in programming it is necessary to use kinesthetic tools at the stage of mental algorithmic maps formation; algorithmic animation and algorithmic mental maps at the stage of algorithmic model and conceptual images formation. Kinesthetic tools for development of students’ AT skills when training in algorithmization and programming are designed. Using of kinesthetic training simulators in educational process provide the effective development of algorithmic style of

European Institutional and Organisational Tools for Maritime Human Resources Development

OpenAIRE

Dragomir Cristina

2012-01-01

Seafarers need to continuously develop their career, at all stages of their professional life. This paper presents some tools of institutional and organisational career development. At insitutional level there are presented vocational education and training tools provided by the European Union institutions while at organisational level are exemplified some tools used by private crewing companies for maritime human resources assessment and development.

The development of a practical tool for risk assessment of manual work – the HAT-tool

NARCIS (Netherlands)

Kraker, H. de; Douwes, M.

2008-01-01

For the Dutch Ministry of Social Affairs and Employment we developed a tool to assess the risks of developing complaints of the arm, neck or shoulders during manual work. The tool was developed for every type of organization and is easy to use, does not require measurements other than time and can

Embedded Systems Development Tools: A MODUS-oriented Market Overview

Directory of Open Access Journals (Sweden)

Loupis Michalis

2014-03-01

Full Text Available Background: The embedded systems technology has perhaps been the most dominating technology in high-tech industries, in the past decade. The industry has correctly identified the potential of this technology and has put its efforts into exploring its full potential. Objectives: The goal of the paper is to explore the versatility of the application in the embedded system development based on one FP7-SME project. Methods/Approach: Embedded applications normally demand high resilience and quality, as well as conformity to quality standards and rigid performance. As a result embedded system developers have adopted software methods that yield high quality. The qualitative approach to examining embedded systems development tools has been applied in this work. Results: This paper presents a MODUS-oriented market analysis in the domains of Formal Verification tools, HW/SW co-simulation tools, Software Performance Optimization tools and Code Generation tools. Conclusions: The versatility of applications this technology serves is amazing. With all this performance potential, the technology has carried with itself a large number of issues which the industry essentially needs to resolve to be able to harness the full potential contained. The MODUS project toolset addressed four discrete domains of the ESD Software Market, in which corresponding open tools were developed

Advanced reach tool (ART) : Development of the mechanistic model

NARCIS (Netherlands)

Fransman, W.; Tongeren, M. van; Cherrie, J.W.; Tischer, M.; Schneider, T.; Schinkel, J.; Kromhout, H.; Warren, N.; Goede, H.; Tielemans, E.

2011-01-01

This paper describes the development of the mechanistic model within a collaborative project, referred to as the Advanced REACH Tool (ART) project, to develop a tool to model inhalation exposure for workers sharing similar operational conditions across different industries and locations in Europe.

Development and Validation of a Rubric for Diagnosing Students' Experimental Design Knowledge and Difficulties.

Science.gov (United States)

Dasgupta, Annwesa P; Anderson, Trevor R; Pelaez, Nancy

2014-01-01

It is essential to teach students about experimental design, as this facilitates their deeper understanding of how most biological knowledge was generated and gives them tools to perform their own investigations. Despite the importance of this area, surprisingly little is known about what students actually learn from designing biological experiments. In this paper, we describe a rubric for experimental design (RED) that can be used to measure knowledge of and diagnose difficulties with experimental design. The development and validation of the RED was informed by a literature review and empirical analysis of undergraduate biology students' responses to three published assessments. Five areas of difficulty with experimental design were identified: the variable properties of an experimental subject; the manipulated variables; measurement of outcomes; accounting for variability; and the scope of inference appropriate for experimental findings. Our findings revealed that some difficulties, documented some 50 yr ago, still exist among our undergraduate students, while others remain poorly investigated. The RED shows great promise for diagnosing students' experimental design knowledge in lecture settings, laboratory courses, research internships, and course-based undergraduate research experiences. It also shows potential for guiding the development and selection of assessment and instructional activities that foster experimental design. © 2014 A. P. Dasgupta et al. CBE—Life Sciences Education © 2014 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Seductive Atmospheres: Using tools to effectuate spaces for Leadership Development

DEFF Research Database (Denmark)

Elmholdt, Kasper Trolle; Clausen, Rune Thorbjørn; Madsen, Mona T

2018-01-01

Hospital, this study investigates how a business game is used as a tool to effectuate episodic spaces for leadership development. The study reveals three tool affordances and discusses how they enable and constrain episodic spaces for development and further develops the notion of seductive atmospheres......This study applies an affordance lens to understand the use of management tools and how atmospheres for change and development are created and exploited. Drawing on an ethnographic case study of a consultant-facilitated change intervention among a group of research leaders at a Danish Public...... as an important mechanism. The article suggests that a broader understanding of the use of tools and the role of atmospheres is essential for understanding how episodic spaces for development come to work in relation to organizational change and development....

Development and verification of a software tool for the acoustic location of partial discharge in a power transformer

Directory of Open Access Journals (Sweden)

Polužanski Vladimir

2014-01-01

Full Text Available This paper discusses the development and verification of software tool for determining the location of partial discharge in a power transformer with the acoustic method. Classification and systematization of physical principles and detection methods and tests of partial discharge in power transformers are shown at the beginning of this paper. The most important mathematical models, features, algorithms, and real problems that affect measurement accuracy are highlighted. This paper describes the development and implementation of a software tool for determining the location of partial discharge in a power transformer based on a no iterative mathematical algorithm. Verification and accuracy of measurement are proved both by computer simulation and experimental results available in the literature.

Pairing experimentation and computational modelling to understand the role of tissue inducer cells in the development of lymphoid organs

Directory of Open Access Journals (Sweden)

Kieran eAlden

2012-07-01

Full Text Available The use of genetic tools, imaging technologies and ex vivo culture systems has provided significant insights into the role of tissue inducer cells and associated signalling pathways in the formation and function of lymphoid organs. Despite advances in experimental technologies, the molecular and cellular process orchestrating the formation of a complex 3-dimensional tissue is difficult to dissect using current approaches. Therefore, a robust set of simulation tools have been developed to model the processes involved in lymphoid tissue development. Specifically the role of different tissue inducer cell populations in the dynamic formation of Peyer's Patches has been examined. Utilising approaches from critical systems engineering an unbiased model of lymphoid tissue inducer cell function has been developed, that permits the development of emerging behaviours that are statistically not different from that observed in vivo. These results provide the confidence to utilise statistical methods to explore how the simulator predicts cellular behaviour and outcomes under different physiological conditions. Such methods, known as sensitivity analysis techniques, can provide insight into when a component part of the system (such as a particular cell type, adhesion molecule, or chemokine begins to have an influence on observed behaviour, and quantifies the effect a component part has on the end result: the formation of lymphoid tissue. Through use of such a principled approach in the design, calibration, and analysis of a computer simulation, a robust in silico tool can be developed which can both further the understanding of a biological system being explored, and act as a tool for the generation of hypotheses which can be tested utilising experimental approaches.

Combined application of mixture experimental design and artificial neural networks in the solid dispersion development.

Science.gov (United States)

Medarević, Djordje P; Kleinebudde, Peter; Djuriš, Jelena; Djurić, Zorica; Ibrić, Svetlana

2016-01-01

This study for the first time demonstrates combined application of mixture experimental design and artificial neural networks (ANNs) in the solid dispersions (SDs) development. Ternary carbamazepine-Soluplus®-poloxamer 188 SDs were prepared by solvent casting method to improve carbamazepine dissolution rate. The influence of the composition of prepared SDs on carbamazepine dissolution rate was evaluated using d-optimal mixture experimental design and multilayer perceptron ANNs. Physicochemical characterization proved the presence of the most stable carbamazepine polymorph III within the SD matrix. Ternary carbamazepine-Soluplus®-poloxamer 188 SDs significantly improved carbamazepine dissolution rate compared to pure drug. Models developed by ANNs and mixture experimental design well described the relationship between proportions of SD components and percentage of carbamazepine released after 10 (Q10) and 20 (Q20) min, wherein ANN model exhibit better predictability on test data set. Proportions of carbamazepine and poloxamer 188 exhibited the highest influence on carbamazepine release rate. The highest carbamazepine release rate was observed for SDs with the lowest proportions of carbamazepine and the highest proportions of poloxamer 188. ANNs and mixture experimental design can be used as powerful data modeling tools in the systematic development of SDs. Taking into account advantages and disadvantages of both techniques, their combined application should be encouraged.

Tools for Science Inquiry Learning: Tool Affordances, Experimentation Strategies, and Conceptual Understanding

Science.gov (United States)

Bumbacher, Engin; Salehi, Shima; Wieman, Carl; Blikstein, Paulo

2017-12-01

Manipulative environments play a fundamental role in inquiry-based science learning, yet how they impact learning is not fully understood. In a series of two studies, we develop the argument that manipulative environments (MEs) influence the kind of inquiry behaviors students engage in, and that this influence realizes through the affordances of MEs, independent of whether they are physical or virtual. In particular, we examine how MEs shape college students' experimentation strategies and conceptual understanding. In study 1, students engaged in two consecutive inquiry tasks, first on mass and spring systems and then on electric circuits. They either used virtual or physical MEs. We found that the use of experimentation strategies was strongly related to conceptual understanding across tasks, but that students engaged differently in those strategies depending on what ME they used. More students engaged in productive strategies using the virtual ME for electric circuits, and vice versa using the physical ME for mass and spring systems. In study 2, we isolated the affordance of measurement uncertainty by comparing two versions of the same virtual ME for electric circuits—one with and one without noise—and found that the conditions differed in terms of productive experimentation strategies. These findings indicate that measures of inquiry processes may resolve apparent ambiguities and inconsistencies between studies on MEs that are based on learning outcomes alone.

The development of a post occupancy evaluation tool for primary schools: learner comfort assessment tool (LCAT)

CSIR Research Space (South Africa)

Motsatsi, L

2015-12-01

Full Text Available in order to facilitate teaching and learning. The aim of this study was to develop a Post Occupational Evaluation (POE) tool to assess learner comfort in relation to indoor environmental quality in the classroom. The development of POE tool followed a...

Modeling and Tool Wear in Routing of CFRP

International Nuclear Information System (INIS)

Iliescu, D.; Fernandez, A.; Gutierrez-Orrantia, M. E.; Lopez de Lacalle, L. N.; Girot, F.

2011-01-01

This paper presents the prediction and evaluation of feed force in routing of carbon composite material. In order to extend tool life and improve quality of the machined surface, a better understanding of uncoated and coated tool behaviors is required. This work describes (1) the optimization of the geometry of multiple teeth tools minimizing the tool wear and the feed force, (2) the optimization of tool coating and (3) the development of a phenomenological model between the feed force, the routing parameters and the tool wear. The experimental results indicate that the feed rate, the cutting speed and the tool wear are the most significant factors affecting the feed force. In the case of multiple teeth tools, a particular geometry with 14 teeth right helix right cut and 11 teeth left helix right cut gives the best results. A thick AlTiN coating or a diamond coating can dramatically improve the tool life while minimizing the axial force, roughness and delamination. A wear model has then been developed based on an abrasive behavior of the tool. The model links the feed rate to the tool geometry parameters (tool diameter), to the process parameters (feed rate, cutting speed and depth of cut) and to the wear. The model presented has been verified by experimental tests.

Using CASE-tools based on formal methods in real-life system development of distributed systems

International Nuclear Information System (INIS)

Stoelen, Ketil; Karlsen, Tore Willy; Mohn, Peter; Sandmark, Haaakon

1998-03-01

Within the OECD Halden Reactor Project (HRP) the development and application of formal methods to enhance system quality have been prioritised tasks for the last three years per periods. The three year programme 1997-1999 identifies the need to gain experience from applying formal methods in larger real-life system developments. This motivated the initiation of the HRP research activity Integration of Formal Specification in the Development of HAMMLAB 2000 (INT-FS). The principal objective of INT-FS is to experiment with formal methods in system developments connected to HAMMLAB 2000 and thereby gain a better understanding of their suitability to support practical software engineering. In particular, INT-FS will try to measure the effect of formal methods and gain experience in combining formal methods with traditional development techniques. INT-FS was started up in January 1997. This report describes the status of INT-FS by February 1998. The report identifies objectives and plans; it motivates the choice of formal methods, CASE-tool and software process; it motivates and defines metrics for measuring achievement and the effect of formalization. The report also provides preliminary results from an experimental development of a communication manager; it describes the component to be developed and the background of the participants; it offers some provisional statistics and summarises the experiences with methods and tools. The development of the communication manager is the first attempt ever to exploit state-of-the-art CASE-tools for formal methods in practical software engineering at the HRP. (author)

Some key issues in the development of ergonomic intervention tools

DEFF Research Database (Denmark)

Edwards, Kasper; Winkel, Jørgen

2016-01-01

Literature reviews suggest that tools facilitating the ergonomic intervention processes should be integrated into rationalization tools, particular if such tools are participative. Such a Tool has recently been developed as an add-in module to the Lean tool “Value Stream Mapping” (VSM). However...

Towards an Experimental Framework for Measuring Usability of Model-Driven Tools

NARCIS (Netherlands)

Panach, Jose Ignacio; Condori-Fernandez, Nelly; Baar, Arthur; Vos, Tanja; Romeu, Ignacio; Pastor, Oscar; Campos, Pedro; Graham, Nicholas; Jorge, Joaquim; Nunes, Nuno; Palanque, Philippe; Winckler, Marco

2011-01-01

According to the Model-Driven Development (MDD) paradigm, analysts can substantially improve the software development process concentrating their efforts on a conceptual model, which can be transformed into code by means of transformation rules applied by a model compiler. However, MDD tools are not

Open source tools for ATR development and performance evaluation

Science.gov (United States)

Baumann, James M.; Dilsavor, Ronald L.; Stubbles, James; Mossing, John C.

2002-07-01

Early in almost every engineering project, a decision must be made about tools; should I buy off-the-shelf tools or should I develop my own. Either choice can involve significant cost and risk. Off-the-shelf tools may be readily available, but they can be expensive to purchase and to maintain licenses, and may not be flexible enough to satisfy all project requirements. On the other hand, developing new tools permits great flexibility, but it can be time- (and budget-) consuming, and the end product still may not work as intended. Open source software has the advantages of both approaches without many of the pitfalls. This paper examines the concept of open source software, including its history, unique culture, and informal yet closely followed conventions. These characteristics influence the quality and quantity of software available, and ultimately its suitability for serious ATR development work. We give an example where Python, an open source scripting language, and OpenEV, a viewing and analysis tool for geospatial data, have been incorporated into ATR performance evaluation projects. While this case highlights the successful use of open source tools, we also offer important insight into risks associated with this approach.

Experimental and Mathematical Modeling for Prediction of Tool Wear on the Machining of Aluminium 6061 Alloy by High Speed Steel Tools

Directory of Open Access Journals (Sweden)

Okokpujie Imhade Princess

2017-12-01

Full Text Available In recent machining operation, tool life is one of the most demanding tasks in production process, especially in the automotive industry. The aim of this paper is to study tool wear on HSS in end milling of aluminium 6061 alloy. The experiments were carried out to investigate tool wear with the machined parameters and to developed mathematical model using response surface methodology. The various machining parameters selected for the experiment are spindle speed (N, feed rate (f, axial depth of cut (a and radial depth of cut (r. The experiment was designed using central composite design (CCD in which 31 samples were run on SIEG 3/10/0010 CNC end milling machine. After each experiment the cutting tool was measured using scanning electron microscope (SEM. The obtained optimum machining parameter combination are spindle speed of 2500 rpm, feed rate of 200 mm/min, axial depth of cut of 20 mm, and radial depth of cut 1.0mm was found out to achieved the minimum tool wear as 0.213 mm. The mathematical model developed predicted the tool wear with 99.7% which is within the acceptable accuracy range for tool wear prediction.

Experimental and Mathematical Modeling for Prediction of Tool Wear on the Machining of Aluminium 6061 Alloy by High Speed Steel Tools

Science.gov (United States)

Okokpujie, Imhade Princess; Ikumapayi, Omolayo M.; Okonkwo, Ugochukwu C.; Salawu, Enesi Y.; Afolalu, Sunday A.; Dirisu, Joseph O.; Nwoke, Obinna N.; Ajayi, Oluseyi O.

2017-12-01

In recent machining operation, tool life is one of the most demanding tasks in production process, especially in the automotive industry. The aim of this paper is to study tool wear on HSS in end milling of aluminium 6061 alloy. The experiments were carried out to investigate tool wear with the machined parameters and to developed mathematical model using response surface methodology. The various machining parameters selected for the experiment are spindle speed (N), feed rate (f), axial depth of cut (a) and radial depth of cut (r). The experiment was designed using central composite design (CCD) in which 31 samples were run on SIEG 3/10/0010 CNC end milling machine. After each experiment the cutting tool was measured using scanning electron microscope (SEM). The obtained optimum machining parameter combination are spindle speed of 2500 rpm, feed rate of 200 mm/min, axial depth of cut of 20 mm, and radial depth of cut 1.0mm was found out to achieved the minimum tool wear as 0.213 mm. The mathematical model developed predicted the tool wear with 99.7% which is within the acceptable accuracy range for tool wear prediction.

Ongoing development of digital radiotherapy plan review tools

International Nuclear Information System (INIS)

Ebert, M.A.; Hatton, J.; Cornes, D.

2011-01-01

Full text: To describe ongoing development of software to support the review of radiotherapy treatment planning system (TPS) data. The 'SWAN' software program was conceived in 2000 and initially developed for the RADAR (TROG 03.04) prostate radiotherapy trial. Validation of the SWAN program has been occurring via implementation by TROG in support of multiple clinical trials. Development has continued and the SWAN software program is now supported by modular components which comprise the 'SW AN system'. This provides a comprehensive set of tools for the review, analysis and archive of TPS exports. The SWAN system has now been used in support of over 20 radiotherapy trials and to review the plans of over 2,000 trial participants. The use of the system for the RADAR trial is now culminating in the derivation of dose-outcomes indices for prostate treatment toxicity. Newly developed SWAN tools include enhanced remote data archive/retrieval, display of dose in both relative and absolute modes, and interfacing to a Matlab-based add-on ('VAST') that allows quantitative analysis of delineated volumes including regional overlap statistics for multi-observer studies. Efforts are continuing to develop the SWAN system in the context of international collaboration aimed at harmonising the quality-assurance activities of collaborative trials groups. Tools such as the SWAN system are essential for ensuring the collection of accurate and reliable evidence to guide future radiotherapy treatments. One of the principal challenges of developing such a tool is establishing a development path that will ensure its validity and applicability well into the future.

High Technology Development and Creation of Experimental Industrial Area of High-Performance Precision Diamond Dress Tool Production for Engineering Needs and Import Substitution in Ukraine

Directory of Open Access Journals (Sweden)

N. Novikov

2013-09-01

Full Text Available Manufacturing design of high-precision diamond tool for special applications carried out at V. M Bakul Institute for Superhard Materials of NAS of Ukraine is described. Presented developments open up scientific and technological capabilities of special dress diamond tool production for mechanical engineering and substitution of imported tools at Ukrainian enterprises by home-produced.

Quality Assurance Project Plan Development Tool

Science.gov (United States)

This tool contains information designed to assist in developing a Quality Assurance (QA) Project Plan that meets EPA requirements for projects that involve surface or groundwater monitoring and/or the collection and analysis of water samples.

Effectiveness of operation tools developed by KEKB operators

International Nuclear Information System (INIS)

Sugino, K.; Satoh, Y.; Kitabayashi, T.

2004-01-01

The main tasks of KEKB (High Energy Accelerator Research Organization B-physics) operators are beam tuning and injection, operation logging, monitoring of accelerator conditions and safety management. New beam tuning methods are frequently applied to KEKB in order to accomplish high luminosity. In such a situation, various operation tools have been developed by the operators to realize efficient operation. In this paper, we describe effectiveness of tools developed by the operators. (author)

Organizing principles as tools for bridging the gap between system theory and biological experimentation.

Science.gov (United States)

Mekios, Constantinos

2016-04-01

Twentieth-century theoretical efforts towards the articulation of general system properties came short of having the significant impact on biological practice that their proponents envisioned. Although the latter did arrive at preliminary mathematical formulations of such properties, they had little success in showing how these could be productively incorporated into the research agenda of biologists. Consequently, the gap that kept system-theoretic principles cut-off from biological experimentation persisted. More recently, however, simple theoretical tools have proved readily applicable within the context of systems biology. In particular, examples reviewed in this paper suggest that rigorous mathematical expressions of design principles, imported primarily from engineering, could produce experimentally confirmable predictions of the regulatory properties of small biological networks. But this is not enough for contemporary systems biologists who adopt the holistic aspirations of early systemologists, seeking high-level organizing principles that could provide insights into problems of biological complexity at the whole-system level. While the presented evidence is not conclusive about whether this strategy could lead to the realization of the lofty goal of a comprehensive explanatory integration, it suggests that the ongoing quest for organizing principles is pragmatically advantageous for systems biologists. The formalisms postulated in the course of this process can serve as bridges between system-theoretic concepts and the results of molecular experimentation: they constitute theoretical tools for generalizing molecular data, thus producing increasingly accurate explanations of system-wide phenomena.

Process development and tooling design for intrinsic hybrid composites

Science.gov (United States)

Riemer, M.; Müller, R.; Drossel, W. G.; Landgrebe, D.

2017-09-01

Hybrid parts, which combine the advantages of different material classes, are moving into the focus of lightweight applications. This development is amplified by their high potential for usage in the field of crash relevant structures. By the current state of the art, hybrid parts are mainly made in separate, subsequent forming and joining processes. By using the concept of an intrinsic hybrid, the shaping of the part and the joining of the different materials are performed in a single process step for shortening the overall processing time and thereby the manufacturing costs. The investigated hybrid part is made from continuous fibre reinforced plastic (FRP), in which a metallic reinforcement structure is integrated. The connection between these layered components is realized by a combination of adhesive bonding and a geometrical form fit. The form fit elements are intrinsically generated during the forming process. This contribution regards the development of the forming process and the design of the forming tool for the single step production of a hybrid part. To this end a forming tool, which combines the thermo-forming and the metal forming process, is developed. The main challenge by designing the tool is the temperature management of the tool elements for the variothermal forming process. The process parameters are determined in basic tests and finite element (FE) simulation studies. On the basis of these investigations a control concept for the steering of the motion axes and the tool temperature is developed. Forming tests are carried out with the developed tool and the manufactured parts are analysed by computer assisted tomography (CT) scans.

Maximizing potential impact of experimental research into cognitive processes in health psychology: A systematic approach to material development.

Science.gov (United States)

Hughes, Alicia M; Gordon, Rola; Chalder, Trudie; Hirsch, Colette R; Moss-Morris, Rona

2016-11-01

There is an abundance of research into cognitive processing biases in clinical psychology including the potential for applying cognitive bias modification techniques to assess the causal role of biases in maintaining anxiety and depression. Within the health psychology field, there is burgeoning interest in applying these experimental methods to assess potential cognitive biases in relation to physical health conditions and health-related behaviours. Experimental research in these areas could inform theoretical development by enabling measurement of implicit cognitive processes that may underlie unhelpful illness beliefs and help drive health-related behaviours. However, to date, there has been no systematic approach to adapting existing experimental paradigms for use within physical health research. Many studies fail to report how materials were developed for the population of interest or have used untested materials developed ad hoc. The lack of protocol for developing stimuli specificity has contributed to large heterogeneity in methodologies and findings. In this article, we emphasize the need for standardized methods for stimuli development and replication in experimental work, particularly as it extends beyond its original anxiety and depression scope to other physical conditions. We briefly describe the paradigms commonly used to assess cognitive biases in attention and interpretation and then describe the steps involved in comprehensive/robust stimuli development for attention and interpretation paradigms using illustrative examples from two conditions: chronic fatigue syndrome and breast cancer. This article highlights the value of preforming rigorous stimuli development and provides tools to aid researchers engage in this process. We believe this work is worthwhile to establish a body of high-quality and replicable experimental research within the health psychology literature. Statement of contribution What is already known on this subject? Cognitive

[COMETE: a tool to develop psychosocial competences in patient education].

Science.gov (United States)

Saugeron, Benoit; Sonnier, Pierre; Marchais, Stéphanie

2016-01-01

This article presents a detailed description of the development and use of the COMETE tool. The COMETE tool is designed to help medical teams identify, develop or evaluate psychosocial skills in patient education and counselling. This tool, designed in the form of a briefcase, proposes methodological activities and cards that assess psychosocial skills during a shared educational assessment, group meetings or during an individual evaluation. This tool is part of a support approach for medical teams caring for patients with chronic diseases.

Qualitative tools and experimental philosophy

Science.gov (United States)

Andow, James

2016-01-01

Abstract Experimental philosophy brings empirical methods to philosophy. These methods are used to probe how people think about philosophically interesting things such as knowledge, morality, and freedom. This paper explores the contribution that qualitative methods have to make in this enterprise. I argue that qualitative methods have the potential to make a much greater contribution than they have so far. Along the way, I acknowledge a few types of resistance that proponents of qualitative methods in experimental philosophy might encounter, and provide reasons to think they are ill-founded. PMID:28392629

FunGeneNet: a web tool to estimate enrichment of functional interactions in experimental gene sets.

Science.gov (United States)

Tiys, Evgeny S; Ivanisenko, Timofey V; Demenkov, Pavel S; Ivanisenko, Vladimir A

2018-02-09

Estimation of functional connectivity in gene sets derived from genome-wide or other biological experiments is one of the essential tasks of bioinformatics. A promising approach for solving this problem is to compare gene networks built using experimental gene sets with random networks. One of the resources that make such an analysis possible is CrossTalkZ, which uses the FunCoup database. However, existing methods, including CrossTalkZ, do not take into account individual types of interactions, such as protein/protein interactions, expression regulation, transport regulation, catalytic reactions, etc., but rather work with generalized types characterizing the existence of any connection between network members. We developed the online tool FunGeneNet, which utilizes the ANDSystem and STRING to reconstruct gene networks using experimental gene sets and to estimate their difference from random networks. To compare the reconstructed networks with random ones, the node permutation algorithm implemented in CrossTalkZ was taken as a basis. To study the FunGeneNet applicability, the functional connectivity analysis of networks constructed for gene sets involved in the Gene Ontology biological processes was conducted. We showed that the method sensitivity exceeds 0.8 at a specificity of 0.95. We found that the significance level of the difference between gene networks of biological processes and random networks is determined by the type of connections considered between objects. At the same time, the highest reliability is achieved for the generalized form of connections that takes into account all the individual types of connections. By taking examples of the thyroid cancer networks and the apoptosis network, it is demonstrated that key participants in these processes are involved in the interactions of those types by which these networks differ from random ones. FunGeneNet is a web tool aimed at proving the functionality of networks in a wide range of sizes of

Validation of designing tools as part of nuclear pump development process

International Nuclear Information System (INIS)

Klemm, T.; Sehr, F.; Spenner, P.; Fritz, J.

2010-01-01

Nuclear pumps are characterized by high safety standards, operational reliability as well as long life cycles. For the design process it is of common use to have a down scaled model pump to qualify operating data and simulate exceptional operating conditions. In case of modifications of the pump design compared to existing reactor coolant pumps a model pump is required to develop methods and tools to design the full scale pump. In the presented case it has a geometry scale of 1:2 regarding the full scale pump size. The experimental data of the model pump is basis for validation of methods and tools which are applied in the designing process of the full scale pump. In this paper the selection of qualified tools and the validation process is demonstrated exemplarily on a cooling circuit. The aim is to predict the resulting flow rate. Tools are chosen for different components depending on the benefit to effort ratio. For elementary flow phenomena such as fluid flow in straight pipes or gaps analytic or empirical laws can be used. For more complex flow situations numerical methods are utilized. Main focus is set on the validation process of the applied numerical flow simulation. In this case not only integral data should be compared, it is also necessary to validate local flow structure of numerical flow simulation to avoid systematic errors in CFD Model generation. Due to complex design internal flow measurements are not possible. On that reason simple comparisons of similar flow test cases are used. Results of this study show, that the flow simulation data closely match measured integral pump and test case data. With this validation it is now possible to qualify CFD simulations as a design tool for the full scale pump in similar cooling circuit. (authors)

Using shell tools in Mesolithic and early Neolithic coastal sites from Northern Spain: experimental program for use wear analysis in malacological materials

Directory of Open Access Journals (Sweden)

Cuenca Solana, David

2010-06-01

Full Text Available One of the most common debates surrounding the Mesolithic and early Neolithic periods in northern Spain focuses on the scarcity of lithic and osseous technologies identified in large shell midden contexts. Currently, several hypotheses have been proposed that attribute this phenomenon to differences in site spatial organization, increases in perishable material use, or changes in subsistence strategies. However, recently shell tools have been identified in the early Neolithic levels at Santimamiñe cave located in the Basque Country of northern Spain. These artifacts are the first evidence of shell tools to be identified in Northern Spain in an early Neolithic shell midden context. This paper proposes the hypothesis that shell tools were being used in subsistence activities. To test this hypothesis, the authors developed an experimental programme using different types of mollusc shells to examine evidence of functional use on wood, dry/fresh animal skin and non-woody plants. The experimental results were then used to examine the patterns of use on the seven shell tools from Santimamiñe. The results of the comparisons indicate that the seven shell tools have similar use patterns as the experimental shells. This evidence supports the proposed hypothesis that shell tools may have been used frequently in shell midden contexts during the Mesolithic and early Neolithic for the working of wood, plants or animal skin.

Uno de los debates más extendidos en la historiografía sobre el Mesolítico y el Neolítico inicial en la región cantábrica es el de la escasez de tecnologías “tradicionales” en la mayor parte de los contextos existentes, especialmente en aquellos con grandes acumulaciones de conchas. Actualmente, varias de las hipótesis propuestas atribuyen este fenómeno a diferencias en la organización espacial de los asentamientos, al aumento en la utilización de materiales perecederos o a cambios en las estrategias de subsistencia

Market research companies and new product development tools

NARCIS (Netherlands)

Nijssen, E.J.; Frambach, R.T.

1998-01-01

This research investigates (1) the share of new product development (NPD) research services in market research (MR) companies’ turnover, (2) MR companies’ awareness and use of NPD tools and the modifications made to these NPD tools, and (3) MR company managers’ perceptions of the influence of client

Market research companies and new product development tools

NARCIS (Netherlands)

Nijssen, Edwin J.; Frambach, Ruud T.

1998-01-01

This research investigates (1) the share of new product development (NPD) research services in market research (MR) companies' turnover, (2) MR companies' awareness and use of NPD tools and the modifications made to these NPD tools, and (3) MR company managers' perceptions of the influence of client

Development of High-Speed Switched Reluctance Motor for Electric Power Tools

Science.gov (United States)

Nakamura, Kenji; Kumasaka, Yuya; Ichinokura, Osamu

2017-10-01

This paper presents design and experimental evaluation of a switched reluctance (SR) motor used for electric power tools. First, characteristics of a previous designed 6/4-pole SR motor is shown and compared to a permanent magnet (PM) motor used in present electric power tools. Next, to further improve characteristics, a 12/8-pole SR motor is designed and evaluated in experiment. It is proved that the performance of the prototype 12/8-pole SR motor is almost comparable or superior to the present PM motor.

Development of Visualization Tools for ZPPR-15 Analysis

International Nuclear Information System (INIS)

Lee, Min Jae; Kim, Sang Ji

2014-01-01

ZPPR-15 cores consist of various drawer masters that have great heterogeneity. In order to build a proper homogenization strategy, the geometry of the drawer masters should be carefully analyzed with a visualization. Additionally, a visualization of drawer masters and the core configuration is necessary for minimizing human error during the input processing. For this purpose, visualization tools for a ZPPR-15 analysis has been developed based on a Perl script. In the following section, the implementation of visualization tools will be described and various visualization samples for both drawer masters and ZPPR-15 cores will be demonstrated. Visualization tools for drawer masters and a core configuration were successfully developed for a ZPPR-15 analysis. The visualization tools are expected to be useful for understanding ZPPR-15 experiments, and finding deterministic models of ZPPR-15. It turned out that generating VTK files is handy but the application of VTK files is powerful with the aid of the VISIT program

Nuclear imaging drug development tools

International Nuclear Information System (INIS)

Buchanan, L.; Jurek, P.; Redshaw, R.

2007-01-01

This article describes the development of nuclear imaging as an enabling technology in the pharmaceutical industry. Molecular imaging is maturing into an important tool with expanding applications from validating that a drug reaches the intended target through to market launch of a new drug. Molecular imaging includes anatomical imaging of organs or tissues, computerized tomography (CT), magnetic resonance imaging (MRI) and ultrasound.

Experimental study of residual stresses in laser clad AISI P20 tool steel on pre-hardened wrought P20 substrate

International Nuclear Information System (INIS)

Chen, J.-Y.; Conlon, K.; Xue, L.; Rogge, R.

2010-01-01

Research highlights: → Laser cladding of P20 tool steel. → Residual stress analysis of laser clad P20 tool steel. → Microstructure of laser clad P20 tool steel. → Tooling Repair using laser cladding. → Stress reliving treatment of laser clad P20 tool steel. - Abstract: Laser cladding is to deposit desired material onto the surface of a base material (or substrate) with a relatively low heat input to form a metallurgically sound and dense clad. This process has been successfully applied for repairing damaged high-value tooling to reduce their through-life cost. However, laser cladding, which needs to melt a small amount of a substrate along with cladding material, inevitably introduces residual stresses in both clad and substrate. The tensile residual stresses in the clad could adversely affect mechanical performance of the substrate being deposited. This paper presents an experimental study on process-induced residual stresses in laser clad AISI P20 tool steel onto pre-hardened wrought P20 base material and the correlation with microstructures using hole-drilling and neutron diffraction methods. Combined with X-ray diffraction and scanning electron microscopic analyses, the roles of solid-state phase transformations in the clad and heat-affected zone (HAZ) of the substrate during cladding and post-cladding heat treatments on the development and controllability of residual stresses in the P20 clad have been investigated, and the results could be beneficial to more effective repair of damaged plastic injection molds made by P20 tool steel.

Preliminary Development of Real Time Usage-Phase Monitoring System for CNC Machine Tools with a Case Study on CNC Machine VMC 250

Science.gov (United States)

Budi Harja, Herman; Prakosa, Tri; Raharno, Sri; Yuwana Martawirya, Yatna; Nurhadi, Indra; Setyo Nogroho, Alamsyah

2018-03-01

The production characteristic of job-shop industry at which products have wide variety but small amounts causes every machine tool will be shared to conduct production process with dynamic load. Its dynamic condition operation directly affects machine tools component reliability. Hence, determination of maintenance schedule for every component should be calculated based on actual usage of machine tools component. This paper describes study on development of monitoring system to obtaining information about each CNC machine tool component usage in real time approached by component grouping based on its operation phase. A special device has been developed for monitoring machine tool component usage by utilizing usage phase activity data taken from certain electronics components within CNC machine. The components are adaptor, servo driver and spindle driver, as well as some additional components such as microcontroller and relays. The obtained data are utilized for detecting machine utilization phases such as power on state, machine ready state or spindle running state. Experimental result have shown that the developed CNC machine tool monitoring system is capable of obtaining phase information of machine tool usage as well as its duration and displays the information at the user interface application.

Geometrical characterization of micro end milling tools

DEFF Research Database (Denmark)

Borsetto, Francesca; Bariani, Paolo; Bissacco, Giuliano

2005-01-01

Performance of the milling process is directly affected by the accuracy of tool geometry. Development of methods suitable for dimensional characterization of such tools, with low measurement uncertainties is therefore of relevance. The present article focuses on the geometrical characterization...... of a flat micro end milling tool with a nominal mill diameter of 200 microns. An experimental investigation was carried out involving two different non-contact systems...

Experimental field study of problem-solving using tools in free-ranging capuchins (Sapajus nigritus, formerly Cebus nigritus).

Science.gov (United States)

Garber, P A; Gomes, D F; Bicca-Marques, J C

2012-04-01

Some populations of capuchins are reported to use tools to solve foraging problems in the wild. In most cases, this involves the act of pounding and digging. The use of probing tools by wild capuchins is considerably less common. Here we report on the results of an experimental field study conducted in southern Brazil designed to examine the ability of wild black-horned capuchins (Sapajus nigritus) to use a wooden dowel as a lever or a probe to obtain an embedded food reward. A group of eight capuchins was presented with two experimental platforms, each housing a clear Plexiglas box containing two bananas on a shelf and four inserted dowels. Depending on the conditions of the experiment, the capuchins were required either to pull (Condition I) or push (Conditions II and III) the dowels, in order to dislodge the food reward from the shelf so that it could be manually retrieved. In Condition I, four individuals spontaneously solved the foraging problem by pulling the dowels in 25% (72/291) of visits. In Conditions II and III, however, no capuchin successfully pushed the dowels forward to obtain the food reward. During these latter two experimental conditions, the capuchins continued to pull the dowels (41/151 or 27% of visits), even though this behavior did not result in foraging success. The results of these field experiments are consistent with an identical study conducted on wild Cebus capucinus in Costa Rica, and suggest that when using an external object as a probe to solve a foraging problem, individual capuchins were able to rapidly learn an association between the tool and the food reward, but failed to understand exactly how the tool functioned in accomplishing the task. The results also suggest that once a capuchin learned to solve this tool-mediated foraging problem, the individual persisted in using the same solution even in the face of repeated failure (slow rate of learning extinction). © 2011 Wiley Periodicals, Inc.

APPLICATION OF THE SPECTRUM ANALYSIS WITH USING BERG METHOD TO DEVELOPED SPECIAL SOFTWARE TOOLS FOR OPTICAL VIBRATION DIAGNOSTICS SYSTEM

Directory of Open Access Journals (Sweden)

E. O. Zaitsev

2016-01-01

Full Text Available The objective of this paper is development and experimental verification special software of spectral analysis. Spectral analysis use of controlled vibrations objects. Spectral analysis of vibration based on use maximum-entropy autoregressive method of spectral analysis by the Berg algorithm. For measured signals use preliminary analysis based on regression analysis. This analysis of the signal enables to eliminate uninformative parameters such as – the noise and the trend. For preliminary analysis developed special software tools. Non-contact measurement of mechanical vibrations parameters rotating diffusely-reflecting surfaces used in circumstances where the use of contact sensors difficult or impossible for a number of reasons, including lack of access to the object, the small size of the controlled area controlled portion has a high temperature or is affected by strong electromagnetic fields. For control use offered laser measuring system. This measuring system overcomes the shortcomings interference or Doppler optical measuring systems. Such as measure the large amplitude and inharmonious vibration. On the basis of the proposed methods developed special software tools for use measuring laser system. LabVIEW using for developed special software. Experimental research of the proposed method of vibration signals processing is checked in the analysis of the diagnostic information obtained by measuring the vibration system grinding diamond wheel cold solid tungsten-containing alloy TK8. A result of work special software tools was complex spectrum obtained «purified» from non-informative parameters. Spectrum of the signal corresponding to the vibration process observed object. 

Indigenous youth-developed self-assessment: The Personal Balance Tool.

Science.gov (United States)

Barraza, Rachelle; Bartgis, Jami

2016-01-01

The Fresno American Indian Health Project (FAIHP) Youth Council developed and pilot tested a strength-based, holistic, and youth-friendly self-assessment tool grounded in the Medicine Wheel, a framework and theoretical orientation for teaching wellness in many tribal communities. This paper summarizes the development of the Youth Personal Balance Tool and the methods used for tool revisions through two separate pilot studies and ongoing process evaluations across 3 years. Using a community-based participatory evaluation model, FAIHP leveraged community resources to implement an annual youth Gathering of Native Americans to support youth in healing from historical and intergenerational trauma and restoring communities to balance by making them a part of the solution. This tool is one of many outcomes of their work. The Youth Council is offering the tool as a gift (in line with the cultural value of generosity) to other Indigenous communities that are searching for culturally competent self-assessment tools for youth. The authors believe this tool has the potential to progress the field in strength-based, holistic, youth-friendly assessment as a culturally competent method for Indigenous evaluation and research.

Developing e-marketing tools : Case company: CASTA Ltd.

OpenAIRE

Nguyen, Chi

2014-01-01

This Bachelor’s thesis topic is developing e-marketing tools for the B2C sector of CASTA Ltd. The final outcome is a set of online marketing tools guidelines that can improve business activities, especially marketing effectiveness. Based on the company’s status as a novice in online marketing field, the thesis will focus on the basic level of three specific online marketing tools, instead of covering the whole e-marketing subject. The theoretical framework first describes the concept of e...

Development of configuration risk management tool

International Nuclear Information System (INIS)

Masuda, Takahiro; Doi, Eiji

2003-01-01

Tokyo Electric Power Company (referred to as TEPCO hereinafter), and other Japanese utilities as well, have been trying to improve the capacity factor of their Nuclear Power Plants (NPPs) through modernization of Operation and Maintenance strategy. TEPCO intends to apply risk information to O and M field with maintaining or even improving both safety and production efficiency. Under these situations, TEPCO with some BWR utilities started to develop a Configuration Risk Management (CRM) tool that can estimate risk in various plant conditions due to configuration changes during outage. Moreover, we also intend to apply CRM to on-line maintenance (OLM) in the near future. This tool can calculate the Core Damage Frequency (CDF) according to given plant condition, such as SSCs availability, decay heat level and the inventory of coolant in both outage state and full-power operation. From deterministic viewpoint, whether certain configuration meet the related requirements of Technical Specifications. User-friendly interface is one of the important features of this tool because this enables the site engineers with little experience in PSA to quantify and utilize the risk information by this tool. (author)

Developing a mapping tool for tablets

Science.gov (United States)

Vaughan, Alan; Collins, Nathan; Krus, Mike

2014-05-01

Digital field mapping offers significant benefits when compared with traditional paper mapping techniques in that it provides closer integration with downstream geological modelling and analysis. It also provides the mapper with the ability to rapidly integrate new data with existing databases without the potential degradation caused by repeated manual transcription of numeric, graphical and meta-data. In order to achieve these benefits, a number of PC-based digital mapping tools are available which have been developed for specific communities, eg the BGS•SIGMA project, Midland Valley's FieldMove®, and a range of solutions based on ArcGIS® software, which can be combined with either traditional or digital orientation and data collection tools. However, with the now widespread availability of inexpensive tablets and smart phones, a user led demand for a fully integrated tablet mapping tool has arisen. This poster describes the development of a tablet-based mapping environment specifically designed for geologists. The challenge was to deliver a system that would feel sufficiently close to the flexibility of paper-based geological mapping while being implemented on a consumer communication and entertainment device. The first release of a tablet-based geological mapping system from this project is illustrated and will be shown as implemented on an iPad during the poster session. Midland Valley is pioneering tablet-based mapping and, along with its industrial and academic partners, will be using the application in field based projects throughout this year and will be integrating feedback in further developments of this technology.

Evaluation and selection of CASE tool for SMART OTS development

International Nuclear Information System (INIS)

Park, K. O; Seo, S. M.; Seo, Y. S.; Koo, I. S.; Jang, M. H.

1999-01-01

CASE(Computer-Aided Software Engineering) tool is a software that aids in software engineering activities such as requirement analysis, design, testing, configuration management, and project management. The evaluation and selection of commercial CASE tools for the specific software development project is not a easy work because the technical ability of an evaluator and the maturity of a software development organization are required. In this paper, we discuss selection strategies, characteristic survey, evaluation criteria, and the result of CASE tool selection for the development of SMART(System-integrated Modular Advanced ReacTor) OTS(Operator Training Simulator)

A Tool for Conceptualising in PSS development

DEFF Research Database (Denmark)

Matzen, Detlef; McAloone, Timothy Charles

2006-01-01

This paper introduces a tool for conceptualising in the development of product/servicesystems (PSS), based upon the modelling of service activities. Our argumentation is built on two previous articles by the same author, previously presented at the 16. Symposium “Design for X” [1] and the 9th Int...... the integrated consideration of the customers’ activities, possible PSS offerings and beneficial partnering options (i.e. between different supplier companies) within the delivery value chain.......This paper introduces a tool for conceptualising in the development of product/servicesystems (PSS), based upon the modelling of service activities. Our argumentation is built on two previous articles by the same author, previously presented at the 16. Symposium “Design for X” [1] and the 9th...... International Design Conference [2]. In this contribution, we take the step from a fundamental understanding of the phenomenon to creating a normative exploitation of this understanding for PSS concept development. The developed modelling technique is based on the Customer Activity Cycle (CAC) model...

The development of tool manufacture in humans: what helps young children make innovative tools?

Science.gov (United States)

Chappell, Jackie; Cutting, Nicola; Apperly, Ian A; Beck, Sarah R

2013-11-19

We know that even young children are proficient tool users, but until recently, little was known about how they make tools. Here, we will explore the concepts underlying tool making, and the kinds of information and putative cognitive abilities required for children to manufacture novel tools. We will review the evidence for novel tool manufacture from the comparative literature and present a growing body of data from children suggesting that innovation of the solution to a problem by making a tool is a much more challenging task than previously thought. Children's difficulty with these kinds of tasks does not seem to be explained by perseveration with unmodified tools, difficulty with switching to alternative strategies, task pragmatics or issues with permission. Rather, making novel tools (without having seen an example of the required tool within the context of the task) appears to be hard, because it is an example of an 'ill-structured problem'. In this type of ill-structured problem, the starting conditions and end goal are known, but the transformations and/or actions required to get from one to the other are not specified. We will discuss the implications of these findings for understanding the development of problem-solving in humans and other animals.

The development of tool manufacture in humans: what helps young children make innovative tools?

Science.gov (United States)

Chappell, Jackie; Cutting, Nicola; Apperly, Ian A.; Beck, Sarah R.

2013-01-01

We know that even young children are proficient tool users, but until recently, little was known about how they make tools. Here, we will explore the concepts underlying tool making, and the kinds of information and putative cognitive abilities required for children to manufacture novel tools. We will review the evidence for novel tool manufacture from the comparative literature and present a growing body of data from children suggesting that innovation of the solution to a problem by making a tool is a much more challenging task than previously thought. Children's difficulty with these kinds of tasks does not seem to be explained by perseveration with unmodified tools, difficulty with switching to alternative strategies, task pragmatics or issues with permission. Rather, making novel tools (without having seen an example of the required tool within the context of the task) appears to be hard, because it is an example of an ‘ill-structured problem’. In this type of ill-structured problem, the starting conditions and end goal are known, but the transformations and/or actions required to get from one to the other are not specified. We will discuss the implications of these findings for understanding the development of problem-solving in humans and other animals. PMID:24101620

Designing a tool for curriculum leadership development in postgraduate programs

Directory of Open Access Journals (Sweden)

M Avizhgan

2016-07-01

Full Text Available Introduction: Leadership in the area of curriculum development is increasingly important as we look for ways to improve our programmes and practices. In curriculum studies, leadership has received little attention. Considering the lack of an evaluation tool with objective criteria in postgraduate curriculum leadership process, this study aimed to design a specific tool and determine the validity and reliability of the tool. Method: This study is a methodological research.  At first, domains and items of the tool were determined through expert interviews and literature review. Then, using Delphi technique, 54 important criteria were developed. A panel of experts was used to confirm content and face validity. Reliability was determined by a descriptive study in which 30 faculties from two of Isfahan universities and was estimated by internal consistency. The data were analyzed by SPSS software, using Pearson Correlation Coefficient and reliability analysis. Results: At first, considering the definition of curriculum leadership determined the domains and items of the tool and they were developed primary tool. Expert’s faculties’ views were used in deferent stages of development and psychometry. The tool internal consistency with Cronbach's alpha coefficient times was 96.5. This was determined for each domain separately. Conclution: Applying this instrument can improve the effectiveness of curriculum leadership. Identifying the characteristics of successful and effective leaders, and utilizing this knowledge in developing and implementing curriculum might help us to have better respond to the changing needs of our students, teachers and schools of tomorrow.

An integrated environment for developing object-oriented CAE tools

Energy Technology Data Exchange (ETDEWEB)

Hofmann, P.; Ryba, M.; Baitinger, U.G. [Integrated System Engeneering, Stuttgart (Germany)

1996-12-31

This paper presents how object oriented techniques can applied to improve the development of CAE tools. For the design of modular and reusable software systems we use predefined and well tested building blocks. These building blocks are reusable software components based on object-oriented technology which allows the assembling of software systems. Today CAE tools are typically very complex and computation extensive. Therefore we need a concept, that join the advantages of the object-oriented paradigm with the advantages of parallel and distributed programming. So we present a design environment for the development of concurrent-object oriented CAE tools called CoDO.

Long-reach articulated robots for inspection and mini-invasive interventions in hazardous environments: Recent robotics research, qualification testing, and tool developments

International Nuclear Information System (INIS)

Perrot, Yann; Kammerer, Nolwenn; Measson, Yvan; Verney, Alexandre; Gargiulo, Laurent; Houry, Michael; Keller, Delphine; Piolain, Gerard

2012-01-01

The Interactive Robotics Laboratory of CEA LIST is in charge of the development of remote handling technologies to meet energy industry requirements. This paper reports the research and development activities in advanced robotics systems for inspection or light intervention in hazardous environments with limited access such as blind hot cells in the nuclear industry or the thermonuclear experimental Tokamak fusion reactor. A long-reach carrier robot called the articulated inspection arm (AIA) and diagnostics and tools for inspection or intervention are described. Finally experimental field tests are presented and actual challenges in modeling the robot's flexibilities are discussed. (authors)

Database development tool DELPHI and its application

International Nuclear Information System (INIS)

Ma Mei

2000-01-01

The authors described the progress of the software development technologies and tools, the features and performances of Borland Delphi and a software development instance which is the Management Information System of Tank region storage and transportation control center for Zhenhai Refining and Chemical CO., Ltd. in the Zhejiang province

Development of tools for automatic generation of PLC code

OpenAIRE

Koutli, Maria; Chasapis, Georgios; Rochez, Jacques

2014-01-01

This Master thesis was performed at CERN and more specifically in the EN-ICE-PLC section. The Thesis describes the integration of two PLC platforms, that are based on CODESYS development tool, to the CERN defined industrial framework, UNICOS. CODESYS is a development tool for PLC programming, based on IEC 61131-3 standard, and is adopted by many PLC manufacturers. The two PLC development environments are, the SoMachine from Schneider and the TwinCAT from Beckhoff. The two CODESYS compatible P...

Software Development Methods and Tools: a New Zealand study

OpenAIRE

Chris Phillips; Elizabeth Kemp; Duncan Hedderley

2005-01-01

This study is a more detailed follow-up to a preliminary investigation of the practices of software engineers in New Zealand. The focus of this study is on the methods and tools used by software developers in their current organisation. The project involved detailed questionnaires being piloted and sent out to several hundred software developers. A central part of the research involved the identification of factors affecting the use and take-up of existing software development tools in the wo...

Development of remote handling tools for glove box

International Nuclear Information System (INIS)

Tomita, Yutaka; Nemoto, Takeshi; Denuma, Akio; Todokoro, Akio

1996-01-01

For a part of advanced nuclear fuel recycling technology development, we will separate and recover Americium from the MOX fuel scrap by solvent extraction. When we carry this examination, reduction of exposure from Americium-241 is one of important problems. To solve this problem fundamentally, we studied many joints type of the remote handling tools for glove box and produced a trial production machine. Also, we carried out basic function examinations of it. As a result, we got the prospect of development of the remote handling tools which could treat Americium in glove box. (author)

Developing a Conceptual Design Engineering Toolbox and its Tools

Directory of Open Access Journals (Sweden)

R. W. Vroom

2004-01-01

Full Text Available In order to develop a successful product, a design engineer needs to pay attention to all relevant aspects of that product. Many tools are available, software, books, websites, and commercial services. To unlock these potentially useful sources of knowledge, we are developing C-DET, a toolbox for conceptual design engineering. The idea of C-DET is that designers are supported by a system that provides them with a knowledge portal on one hand, and a system to store their current work on the other. The knowledge portal is to help the designer to find the most appropriate sites, experts, tools etc. at a short notice. Such a toolbox offers opportunities to incorporate extra functionalities to support the design engineering work. One of these functionalities could be to help the designer to reach a balanced comprehension in his work. Furthermore C-DET enables researchers in the area of design engineering and design engineers themselves to find each other or their work earlier and more easily. Newly developed design tools that can be used by design engineers but have not yet been developed up to a commercial level could be linked to by C-DET. In this way these tools can be evaluated in an early stage by design engineers who would like to use them. This paper describes the first prototypes of C-DET, an example of the development of a design tool that enables designers to forecast the use process and an example of the future functionalities of C-DET such as balanced comprehension.

Laser shocks: A tool for experimental simulation of damage into materials

Energy Technology Data Exchange (ETDEWEB)

Boustie, M.; Cuq Lelandais, J. P.; Berthe, L.; Ecault, R. [Institut PPRIME, Departement Physique et Mecanique des Materiaux, CNRS-ENSMA-Universite de Poitiers, 1 av Clement Ader, 86961 FUTUROSCOPE Cedex (France); CEA-DAM Valduc, 21120 Is-sur-Tille (France); Laboratoire Procedes et Ingenierie en Mecanique et Materiaux (CNRS), Arts et Metiers ParisTech, 151 bd de l' Hopital, 75013 PARIS (France); Institut PPRIME, Departement Physique et Mecanique des Materiaux, CNRS-ENSMA-Universite de Poitiers, 1 av Clement Ader, 86961 FUTUROSCOPE Cedex (France)

2012-07-30

High power laser irradiation of solids results in a strong shock wave propagation, driving very high amplitude pressure loadings with very short durations. These particular characteristics offer the possibility to study the behaviour of matter under extreme dynamic conditions in continuity with what is possible with the conventional generators of shock (launchers of projectiles, explosives). An advantage of laser shocks is a possible recovery of the shocked samples presenting the metallurgical effects of the shock in most cases. We introduce the principle of the laser shock generation, the characterization of these shocks, the principal mechanisms and effects associated with their propagation in the solids. We show how laser shocks can be a laboratory tool for simulating shock effects at ultra high strain rate, providing a high in information experimental layout for validation of damage modelling on an extended strain rate range compared to conventional shock generators. New data have been obtained with ultra short femtosecond range irradiation. Experimental data gathered through post mortem observation, time resolved velocity measurement are shown along with numerical associated simulations, showing the possibility to predict the damage behaviour of metallic targets under extreme strain rate up to 10{sup 8} s{sup -1}.

Classical experiments revisited: smartphones and tablet PCs as experimental tools in acoustics and optics

Science.gov (United States)

Klein, P.; Hirth, M.; Gröber, S.; Kuhn, J.; Müller, A.

2014-07-01

Smartphones and tablets are used as experimental tools and for quantitative measurements in two traditional laboratory experiments for undergraduate physics courses. The Doppler effect is analyzed and the speed of sound is determined with an accuracy of about 5% using ultrasonic frequency and two smartphones, which serve as rotating sound emitter and stationary sound detector. Emphasis is put on the investigation of measurement errors in order to judge experimentally derived results and to sensitize undergraduate students to the methods of error estimates. The distance dependence of the illuminance of a light bulb is investigated using an ambient light sensor of a mobile device. Satisfactory results indicate that the spectrum of possible smartphone experiments goes well beyond those already published for mechanics.

Development of an Automated Security Risk Assessment Methodology Tool for Critical Infrastructures.

Energy Technology Data Exchange (ETDEWEB)

Jaeger, Calvin Dell; Roehrig, Nathaniel S.; Torres, Teresa M.

2008-12-01

This document presents the security automated Risk Assessment Methodology (RAM) prototype tool developed by Sandia National Laboratories (SNL). This work leverages SNL's capabilities and skills in security risk analysis and the development of vulnerability assessment/risk assessment methodologies to develop an automated prototype security RAM tool for critical infrastructures (RAM-CITM). The prototype automated RAM tool provides a user-friendly, systematic, and comprehensive risk-based tool to assist CI sector and security professionals in assessing and managing security risk from malevolent threats. The current tool is structured on the basic RAM framework developed by SNL. It is envisioned that this prototype tool will be adapted to meet the requirements of different CI sectors and thereby provide additional capabilities.

An Experimental Platform for Autonomous Bus Development

Directory of Open Access Journals (Sweden)

Héctor Montes

2017-11-01

Full Text Available Nowadays, with highly developed instrumentation, sensing and actuation technologies, it is possible to foresee an important advance in the field of autonomous and/or semi-autonomous transportation systems. Intelligent Transport Systems (ITS have been subjected to very active research for many years, and Bus Rapid Transit (BRT is one area of major interest. Among the most promising transport infrastructures, the articulated bus is an interesting, low cost, high occupancy capacity and friendly option. In this paper, an experimental platform for research on the automatic control of an articulated bus is presented. The aim of the platform is to allow full experimentation in real conditions for testing technological developments and control algorithms. The experimental platform consists of a mobile component (a commercial articulated bus fully instrumented and a ground test area composed of asphalt roads inside the Consejo Superior de Investigaciones Científicas (CSIC premises. This paper focuses also on the development of a human machine interface to ease progress in control system evaluation. Some experimental results are presented in order to show the potential of the proposed platform.

Development and experimental assessment of a numerical modelling code to aid the design of profile extrusion cooling tools

Science.gov (United States)

Carneiro, O. S.; Rajkumar, A.; Fernandes, C.; Ferrás, L. L.; Habla, F.; Nóbrega, J. M.

2017-10-01

On the extrusion of thermoplastic profiles, upon the forming stage that takes place in the extrusion die, the profile must be cooled in a metallic calibrator. This stage must be done at a high rate, to assure increased productivity, but avoiding the development of high temperature gradients, in order to minimize the level of induced thermal residual stresses. In this work, we present a new coupled numerical solver, developed in the framework of the OpenFOAM® computational library, that computes the temperature distribution in both domains simultaneously (metallic calibrator and plastic profile), whose implementation aimed the minimization of the computational time. The new solver was experimentally assessed with an industrial case study.

The Bristol Radiology Report Assessment Tool (BRRAT): Developing a workplace-based assessment tool for radiology reporting skills

International Nuclear Information System (INIS)

Wallis, A.; Edey, A.; Prothero, D.; McCoubrie, P.

2013-01-01

Aim: To review the development of a workplace-based assessment tool to assess the quality of written radiology reports and assess its reliability, feasibility, and validity. Materials and methods: A comprehensive literature review and rigorous Delphi study enabled the development of the Bristol Radiology Report Assessment Tool (BRRAT), which consists of 19 questions and a global assessment score. Three assessors applied the assessment tool to 240 radiology reports provided by 24 radiology trainees. Results: The reliability coefficient for the 19 questions was 0.79 and the equivalent coefficient for the global assessment scores was 0.67. Generalizability coefficients demonstrate that higher numbers of assessors and assessments are needed to reach acceptable levels of reliability for summative assessments due to assessor subjectivity. Conclusion: The study methodology gives good validity and strong foundation in best-practice. The assessment tool developed for radiology reporting is reliable and most suited to formative assessments

Experiences from the development of the FAME communication manager using the CASE-tool SDT

International Nuclear Information System (INIS)

Stoelen, Ketil; Mohn, Peter; Sandmark, Haakon; Thunem, Harald

1999-05-01

The three year programme 1997-1999 for the OECD Halden Reactor Project (HRP) identifies the need to gain experience from applying formal techniques in real-life system developments. This motivated the initiation of the HRP research activity Integration of Formal Specification in the Development of HAMMLAB 2000 (INT-FS). The principal objective was to experiment with formal techniques in system developments at the HRP; in particular, system developments connected to HAMMLAB 2000 - the computerised laboratory for man-machine-interaction experiments currently under construction. It was hoped that this experimentation with formal techniques should result in a better understanding of how such techniques should be utilised in a more industrial setting. To obtain more knowledge with respect to the practical effects and consequences of an increased level of formalization was another objective. This report presents the results from an INT-FS development of a control component. The report describes the architecture of this component, the techniques, methods and tools used during its development, and the background of the personnel taking part. It also outlines the development process and describes the activities within the various development stages. Finally, it summarizes experiences and results, and discusses their relevance. The report concludes that the selected formalisms and tools are helpful for the development of distributed systems. In particular, the formalization of the informal requirements identified many weaknesses and inconsistencies. The involved parties found the description techniques easy to understand and well-suited as a medium for discussing and capturing requirements. The simulation of design was also a very positive experience (author) (ml)

Development of a single ion micro-irradiation facility for experimental radiobiology at cell level

International Nuclear Information System (INIS)

Barberet, Ph.

2003-10-01

A micro-irradiation device has been developed for radiobiology applications at the scale of the cell. This device is based on an upgrade of an existing micro-beam line that was already able to deliver a 1 to 3 MeV proton or alpha beam of low intensity and whose space resolution is lower than 1 micrometer in vacuum. The important part of this work has been the development of an irradiation stage designed to fit on the micro-probe and able to deliver ions in the air with an absolute accuracy of a few micrometers. A program has been set up to monitor the complete irradiation line in testing and in automatic irradiation operating phases. Simulation tools based on Monte-Carlo calculations have been validated through comparisons with experimental data particularly in the field of spatial resolution and of the number of ions delivered. The promising results show the possibility in a near future to use this tool to study the response of cells to very low irradiation doses down to the extreme limit of one ion per cell

Pupils, Tools and the Zone of Proximal Development

Science.gov (United States)

Abtahi, Yasmine

2018-01-01

In this article, I use the Vygotskian concept of the Zone of Proximal Development (ZPD) to examine the learning experience of two grade seven pupils as they attempted to solve an addition of fractions problem using fraction strips. The aim is to highlight how tools can facilitate the enactment of a ZPD, within which the tool provides the guidance.…

Selecting Tools for Renewable Energy Analysis in Developing Countries: An Expanded Review

Energy Technology Data Exchange (ETDEWEB)

Irsyad, M. Indra al [School of Earth and Environmental Science, University of Queensland, Brisbane, QLD (Australia); Ministry of Energy and Mineral Resources, Jakarta (Indonesia); Halog, Anthony Basco, E-mail: a.halog@uq.edu.au [School of Earth and Environmental Science, University of Queensland, Brisbane, QLD (Australia); Nepal, Rabindra [Massey Business School, Massey University, Palmerston North (New Zealand); Koesrindartoto, Deddy P. [School of Business and Management, Institut Teknologi Bandung, Bandung (Indonesia)

2017-12-20

Renewable energy planners in developing countries should be cautious in using analytical tools formulated in developed countries. Traditional energy consumption, economic and demography transitions, high-income inequality, and informal economy are some characteristics of developing countries that may contradict the assumptions of mainstream, widely used analytical tools. In this study, we synthesize the debate in previous review studies on energy models for developing countries and then extend the scope of the previous studies by highlighting emerging methods of system thinking, life cycle thinking, and decision support analysis. We then discuss how these tools have been used for renewable energy analysis in developing countries and found out that not all studies are aware of the emerging critical issues in developing countries. We offer here a guidance to select the most appropriate analytical tool, mainly when dealing with energy modeling and analysis for developing countries. We also suggest potential future improvements to the analytical tool for renewable energy modeling and analysis in the developing countries.

Selecting Tools for Renewable Energy Analysis in Developing Countries: An Expanded Review

International Nuclear Information System (INIS)

Irsyad, M. Indra al; Halog, Anthony Basco; Nepal, Rabindra; Koesrindartoto, Deddy P.

2017-01-01

Renewable energy planners in developing countries should be cautious in using analytical tools formulated in developed countries. Traditional energy consumption, economic and demography transitions, high-income inequality, and informal economy are some characteristics of developing countries that may contradict the assumptions of mainstream, widely used analytical tools. In this study, we synthesize the debate in previous review studies on energy models for developing countries and then extend the scope of the previous studies by highlighting emerging methods of system thinking, life cycle thinking, and decision support analysis. We then discuss how these tools have been used for renewable energy analysis in developing countries and found out that not all studies are aware of the emerging critical issues in developing countries. We offer here a guidance to select the most appropriate analytical tool, mainly when dealing with energy modeling and analysis for developing countries. We also suggest potential future improvements to the analytical tool for renewable energy modeling and analysis in the developing countries.

National Energy Audit Tool for Multifamily Buildings Development Plan

Energy Technology Data Exchange (ETDEWEB)

Malhotra, Mini [ORNL; MacDonald, Michael [Sentech, Inc.; Accawi, Gina K [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

2012-03-01

The U.S. Department of Energy's (DOE's) Weatherization Assistance Program (WAP) enables low-income families to reduce their energy costs by providing funds to make their homes more energy efficient. In addition, the program funds Weatherization Training and Technical Assistance (T and TA) activities to support a range of program operations. These activities include measuring and documenting performance, monitoring programs, promoting advanced techniques and collaborations to further improve program effectiveness, and training, including developing tools and information resources. The T and TA plan outlines the tasks, activities, and milestones to support the weatherization network with the program implementation ramp up efforts. Weatherization of multifamily buildings has been recognized as an effective way to ramp up weatherization efforts. To support this effort, the 2009 National Weatherization T and TA plan includes the task of expanding the functionality of the Weatherization Assistant, a DOE-sponsored family of energy audit computer programs, to perform audits for large and small multifamily buildings This report describes the planning effort for a new multifamily energy audit tool for DOE's WAP. The functionality of the Weatherization Assistant is being expanded to also perform energy audits of small multifamily and large multifamily buildings. The process covers an assessment of needs that includes input from national experts during two national Web conferences. The assessment of needs is then translated into capability and performance descriptions for the proposed new multifamily energy audit, with some description of what might or should be provided in the new tool. The assessment of needs is combined with our best judgment to lay out a strategy for development of the multifamily tool that proceeds in stages, with features of an initial tool (version 1) and a more capable version 2 handled with currently available resources. Additional

Tools for man-machine interface development in accelerator control applications

International Nuclear Information System (INIS)

Kopylov, L.; Mikhev, M.; Trofimov, N.; Yurpalov, V.

1994-01-01

For the UNK Project a development of the Accelerator Control Applications is in the progress. These applications will use a specific Graphical User Interface for data presentation and accelerator parameter management. A number of tools have been developed based on the Motif Tool Kit. They contain a set of problem oriented screen templates and libraries. Using these tools, full scale prototype applications of the UNK Tune and Orbit measurement and correction were developed and are described, as examples. A subset of these allows the creation of the synoptic control screens from the Autocad pictures files and Oracle DB equipment descriptions. The basic concepts and a few application examples are presented. ((orig.))

Software Tools for Development on the Peregrine System | High-Performance

Science.gov (United States)

Computing | NREL Software Tools for Development on the Peregrine System Software Tools for and manage software at the source code level. Cross-Platform Make and SCons The "Cross-Platform Make" (CMake) package is from Kitware, and SCons is a modern software build tool based on Python

Experimental classroom games: a didactic tool in palliative care.

Science.gov (United States)

Alonso, Ana Isabel López; Martínez, Maria Elena Fernández; Presa, Cristina Liébana; Casares, Ana Maria Vázquez; González, Maria Paz Castro

2018-01-01

Objective To evaluate the effect of a games-based intervention on palliative care nursing students' scores on the Collett-Lester Fear of Death Scale. The challenge was to innovate and integrate grief-related theory and experiences into the classroom. Method Quasi-experimental study. Before and after the games-based intervention, 101 and 111 students completed the questionnaires, respectively. The intervention was performed in the context of a palliative care class taught during the first semester of the third year of the nursing programme. Results The students obtained moderate mean scores on the variable fear of death (between 14 and 19) at both time points (pre- and post-intervention). Both men and women indicated a heightened sense of fear post-intervention and a decrease in self-perceived emotional preparedness, which support the value of the games for exposing the student to situations that closely approximated reality. Conclusion The use of games as a didactic tool in the classroom context helped the students recognize the fear generated by proximity to death in the patient and family and in the student him- or herself.

Development of parallel/serial program analyzing tool

International Nuclear Information System (INIS)

Watanabe, Hiroshi; Nagao, Saichi; Takigawa, Yoshio; Kumakura, Toshimasa

1999-03-01

Japan Atomic Energy Research Institute has been developing 'KMtool', a parallel/serial program analyzing tool, in order to promote the parallelization of the science and engineering computation program. KMtool analyzes the performance of program written by FORTRAN77 and MPI, and it reduces the effort for parallelization. This paper describes development purpose, design, utilization and evaluation of KMtool. (author)

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data.

Science.gov (United States)

García Nieto, Paulino José; García-Gonzalo, Esperanza; Ordóñez Galán, Celestino; Bernardo Sánchez, Antonio

2016-01-28

Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC-MARS-based model was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc . Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC-MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed.

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

Directory of Open Access Journals (Sweden)

Paulino José García Nieto

2016-01-01

Full Text Available Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC in combination with multivariate adaptive regression splines (MARS technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC–MARS-based model was successfully used here to predict the milling tool flank wear (output variable as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC–MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed.

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

Science.gov (United States)

García Nieto, Paulino José; García-Gonzalo, Esperanza; Ordóñez Galán, Celestino; Bernardo Sánchez, Antonio

2016-01-01

Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC–MARS-based model was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC–MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed. PMID:28787882

Development of culturally sensitive dialog tools in diabetes education

Directory of Open Access Journals (Sweden)

Nana Folmann Hempler

2015-01-01

Full Text Available Person-centeredness is a goal in diabetes education, and cultural influences are important to consider in this regard. This report describes the use of a design-based research approach to develop culturally sensitive dialog tools to support person-centered dietary education targeting Pakistani immigrants in Denmark with type 2 diabetes. The approach appears to be a promising method to develop dialog tools for patient education that are culturally sensitive, thereby increasing their acceptability among ethnic minority groups. The process also emphasizes the importance of adequate training and competencies in the application of dialog tools and of alignment between researchers and health care professionals with regards to the educational philosophy underlying their use.

The Bristol Radiology Report Assessment Tool (BRRAT): developing a workplace-based assessment tool for radiology reporting skills.

Science.gov (United States)

Wallis, A; Edey, A; Prothero, D; McCoubrie, P

2013-11-01

To review the development of a workplace-based assessment tool to assess the quality of written radiology reports and assess its reliability, feasibility, and validity. A comprehensive literature review and rigorous Delphi study enabled the development of the Bristol Radiology Report Assessment Tool (BRRAT), which consists of 19 questions and a global assessment score. Three assessors applied the assessment tool to 240 radiology reports provided by 24 radiology trainees. The reliability coefficient for the 19 questions was 0.79 and the equivalent coefficient for the global assessment scores was 0.67. Generalizability coefficients demonstrate that higher numbers of assessors and assessments are needed to reach acceptable levels of reliability for summative assessments due to assessor subjectivity. The study methodology gives good validity and strong foundation in best-practice. The assessment tool developed for radiology reporting is reliable and most suited to formative assessments. Copyright © 2013 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Minimization of Surface Roughness and Tool Vibration in CNC Milling Operation

Directory of Open Access Journals (Sweden)

Sukhdev S. Bhogal

2015-01-01

Full Text Available Tool vibration and surface roughness are two important parameters which affect the quality of the component and tool life which indirectly affect the component cost. In this paper, the effect of cutting parameters on tool vibration, and surface roughness has been investigated during end milling of EN-31 tool steel. Response surface methodology (RSM has been used to develop mathematical model for predicting surface finish, tool vibration and tool wear with different combinations of cutting parameters. The experimental results show that feed rate is the most dominating parameter affecting surface finish, whereas cutting speed is the major factor effecting tool vibration. The results of mathematical model are in agreement with experimental investigations done to validate the mathematical model.

Managing design excellence tools during the development of new orthopaedic implants.

Science.gov (United States)

Défossez, Henri J P; Serhan, Hassan

2013-11-01

Design excellence (DEX) tools have been widely used for years in some industries for their potential to facilitate new product development. The medical sector, targeted by cost pressures, has therefore started adopting them. Numerous tools are available; however only appropriate deployment during the new product development stages can optimize the overall process. The primary study objectives were to describe generic tools and illustrate their implementation and management during the development of new orthopaedic implants, and compile a reference package. Secondary objectives were to present the DEX tool investment costs and savings, since the method can require significant resources for which companies must carefully plan. The publicly available DEX method "Define Measure Analyze Design Verify Validate" was adopted and implemented during the development of a new spinal implant. Several tools proved most successful at developing the correct product, addressing clinical needs, and increasing market penetration potential, while reducing design iterations and manufacturing validations. Cost analysis and Pugh Matrix coupled with multi generation planning enabled developing a strong rationale to activate the project, set the vision and goals. improved risk management and product map established a robust technical verification-validation program. Design of experiments and process quantification facilitated design for manufacturing of critical features, as early as the concept phase. Biomechanical testing with analysis of variance provided a validation model with a recognized statistical performance baseline. Within those tools, only certain ones required minimum resources (i.e., business case, multi generational plan, project value proposition, Pugh Matrix, critical To quality process validation techniques), while others required significant investments (i.e., voice of customer, product usage map, improved risk management, design of experiments, biomechanical testing

Development of the Operational Events Groups Ranking Tool

International Nuclear Information System (INIS)

Simic, Zdenko; Banov, Reni

2014-01-01

Both because of complexity and ageing, facilities like nuclear power plants require feedback from the operating experience in order to further improve safety and operation performance. That is the reason why significant effort is dedicated to operating experience feedback. This paper contains description of the specification and development of the application for the operating events ranking software tool. Robust and consistent way of selecting most important events for detail investigation is important because it is not feasible or even useful to investigate all of them. Development of the tool is based on the comprehensive events characterisation and methodical prioritization. This includes rich set of events parameters which allow their top level preliminary analysis, different ways of groupings and even to evaluate uncertainty propagation to the ranking results. One distinct feature of the implemented method is that user (i.e., expert) could determine how important is particular ranking parameter based on their pairwise comparison. For tools demonstration and usability it is crucial that sample database is also created. For useful analysis the whole set of events for 5 years is selected and characterised. Based on the preliminary results this tool seems valuable for new preliminary prospective on data as whole, and especially for the identification of events groups which should have priority in the more detailed assessment. The results are consisting of different informative views on the events groups importance and related sensitivity and uncertainty results. This presents valuable tool for improving overall picture about specific operating experience and also for helping identify the most important events groups for further assessment. It is clear that completeness and consistency of the input data characterisation is very important to get full and valuable importance ranking. Method and tool development described in this paper is part of continuous effort of

Development and testing of an Internet-based data collection technique for simulator and real world experimentation

International Nuclear Information System (INIS)

Droeivoldsmo, Asgeir; Johnsen, Terje

2005-09-01

With experience from many years of data collection in the Man - Machine and Virtual Reality Laboratories at the OECD Halden Reactor Project, an evident need for more efficient handling of questionnaire data was documented. A working prototype on-line system for World Wide Web (www) questionnaire generation and data collection was developed and tested. This paper discusses the use of www-based data collection and the need for system functionality in experiments and surveys. Insights from the development of the system are reported together with experiences using such tools in simulation and realistic field experimentation. (Author)

Developing a Support Tool for Global Product Development Decisions

DEFF Research Database (Denmark)

Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

2016-01-01

This paper investigates how global product development decisions are made through a multiple-case study in three Danish engineering. The paper identifies which information and methods are applied for making decisions and how decision-making can be supported based on previous experience. The paper...... presents results from 51 decisions made in the three companies, and based on the results of the studies a framework for a decision-support tool is outlined and discussed. The paper rounds off with an identification of future research opportunities in the area of global product development and decision-making....

Development and assessment of a new 3D neuroanatomy teaching tool for MRI training.

Science.gov (United States)

Drapkin, Zachary A; Lindgren, Kristen A; Lopez, Michael J; Stabio, Maureen E

2015-01-01

A computerized three-dimensional (3D) neuroanatomy teaching tool was developed for training medical students to identify subcortical structures on a magnetic resonance imaging (MRI) series of the human brain. This program allows the user to transition rapidly between two-dimensional (2D) MRI slices, 3D object composites, and a combined model in which 3D objects are overlaid onto the 2D MRI slices, all while rotating the brain in any direction and advancing through coronal, sagittal, or axial planes. The efficacy of this tool was assessed by comparing scores from an MRI identification quiz and survey in two groups of first-year medical students. The first group was taught using this new 3D teaching tool, and the second group was taught the same content for the same amount of time but with traditional methods, including 2D images of brain MRI slices and 3D models from widely used textbooks and online sources. Students from the experimental group performed marginally better than the control group on overall test score (P = 0.07) and significantly better on test scores extracted from questions involving C-shaped internal brain structures (P teaching tool is an effective way to train medical students to read an MRI of the brain and is particularly effective for teaching C-shaped internal brain structures. © 2015 American Association of Anatomists.

Nucleation and microstructure development in Cr-Mo-V tool steel during gas atomization

Science.gov (United States)

Behúlová, M.; Grgač, P.; Čička, R.

2017-11-01

Nucleation studies of undercooled metallic melts are of essential interest for the understanding of phase selection, growth kinetics and microstructure development during their rapid non-equilibrium solidification. The paper deals with the modelling of nucleation processes and microstructure development in the hypoeutectic tool steel Ch12MF4 with the chemical composition of 2.37% C, 12.06 % Cr, 1.2% Mo, 4.0% V and balance Fe [wt. %] in the process of nitrogen gas atomization. Based on the classical theory of homogeneous nucleation, the nucleation temperature of molten rapidly cooled spherical particles from this alloy with diameter from 40 μm to 600 μm in the gas atomization process is calculated using various estimations of parameters influencing the nucleation process - the Gibbs free energy difference between solid and liquid phases and the solid/liquid interfacial energy. Results of numerical calculations are compared with experimentally measured nucleation temperatures during levitation experiments and microstructures developed in rapidly solidified powder particles from the investigated alloy.

Development of a smart city planning support tool using the cooperative method

Directory of Open Access Journals (Sweden)

Takeshi Kobayashi

2015-12-01

Full Text Available A reduction of environmental burdens is currently required. In particular, proposing a new approach for the construction of a smart city using renewable energy is important. The technological development of a smart city is founded building equipment and infrastructure. However, planning methods and their techniques using the collaboration approach with residents are only just developing. This study aimed to develop a support tool for the construction of a smart city using renewable energy while facilitating consensus-building efforts among residents using the method for a cooperative housing development. We organized the supporting methods for the construction of residential area using the cooperative method. Then, we developed supporting tools that interface the computer with these methods. We examined the support techniques for the construction of a residential area using renewable energy technology by analyzing Japanese cases of a smart city. Moreover, we developed a support tool for the construction of a smart city on a trial basis. We integrated the smart city construction tools and the cooperative housing construction support tool. This tool has a 3D modeling system that helps residents to easily understand the space image as a result of the examination. We also developed a professional supporting tool that residents can consider for cost-effectiveness in renewable energy and its environmental load reduction rate for the planning of a smart city.

Process-Based Quality (PBQ) Tools Development

Energy Technology Data Exchange (ETDEWEB)

Cummins, J.L.

2001-12-03

The objective of this effort is to benchmark the development of process-based quality tools for application in CAD (computer-aided design) model-based applications. The processes of interest are design, manufacturing, and quality process applications. A study was commissioned addressing the impact, current technologies, and known problem areas in application of 3D MCAD (3-dimensional mechanical computer-aided design) models and model integrity on downstream manufacturing and quality processes. The downstream manufacturing and product quality processes are profoundly influenced and dependent on model quality and modeling process integrity. The goal is to illustrate and expedite the modeling and downstream model-based technologies for available or conceptual methods and tools to achieve maximum economic advantage and advance process-based quality concepts.

Development of materials for the rapid manufacture of die cast tooling

Science.gov (United States)

Hardro, Peter Jason

The focus of this research is to develop a material composition that can be processed by rapid prototyping (RP) in order to produce tooling for the die casting process. Where these rapidly produced tools will be superior to traditional tooling production methods by offering one or more of the following advantages: reduced tooling cost, shortened tooling creation time, reduced man-hours for tool creation, increased tool life, and shortened die casting cycle time. By utilizing RP's additive build process and vast material selection, there was a prospect that die cast tooling may be produced quicker and with superior material properties. To this end, the material properties that influence die life and cycle time were determined, and a list of materials that fulfill these "optimal" properties were highlighted. Physical testing was conducted in order to grade the processability of each of the material systems and to optimize the manufacturing process for the downselected material system. Sample specimens were produced and microscopy techniques were utilized to determine a number of physical properties of the material system. Additionally, a benchmark geometry was selected and die casting dies were produced from traditional tool materials (H13 steel) and techniques (machining) and from the newly developed materials and RP techniques (selective laser sintering (SLS) and laser engineered net shaping (LENS)). Once the tools were created, a die cast alloy was selected and a preset number of parts were shot into each tool. During tool creation, the manufacturing time and cost was closely monitored and an economic model was developed to compare traditional tooling to RP tooling. This model allows one to determine, in the early design stages, when it is advantageous to implement RP tooling and when traditional tooling would be best. The results of the physical testing and economic analysis has shown that RP tooling is able to achieve a number of the research objectives, namely

Development of Sustainability Assessment Tool for Malaysian hydropower industry: A case study

Science.gov (United States)

Turan, Faiz Mohd; Johan, Kartina; Abu Sofian, Muhammad Irfan

2018-04-01

This research deals with the development of sustainability assessment tools as a medium to assess the performance of a hydropower project compliances towards sustainability practice. Since the increasing needs of implementing sustainability practice, developed countries are utilizing sustainability tools to achieve sustainable development goals. Its inception within ASEAN countries including Malaysia is still low. The problem with most tools developed from other countries is that it is not very comprehensive as well as its implementation factors are not suitable for the local environment that is not quantified. Hence, there is a need to develop a suitable sustainable assessment tool for the Malaysian hydropower industry to comply with the sustainable development goals as a bridging gap between the governor and the practitioner. The steps of achieving this goal is separated into several parts. The first part is to identify sustainable parameters from established tools as a model for comparison to enhance new parameters. The second stage is to convert equivalent quantification value from the model to the new developed tools. The last stage is to develop software program as a mean of gaining energy company feedback with systematic sustainable reporting from the surveyor so as to be able to integrate sustainability assessment, monitoring and reporting for self-improved reporting.

The development of human factors experimental evaluation techniques

Energy Technology Data Exchange (ETDEWEB)

Sim, Bong Shick; Oh, In Suk; Cha, Kyung Ho; Lee, Hyun Chul; Park, Geun Ok; Cheon, Se Woo; Suh, Sang Moon

1997-07-01

New human factors issues, such as evaluation of information navigation, the consideration of operator characteristics, and operator performance assessment, related to the HMI design based on VDUs are being risen. Thus, in order to solve these human factors issues, this project aims to establish the experimental technologies including the techniques for experimental design, experimental measurement, data collection and analysis, and to develop ITF (Integrated Test Facility) suitable for the experiment of HMI design evaluation. For the establish of the experimental data analysis and evaluation methodologies, we developed as the following: (1) a paradigm for human factors experimentation including experimental designs, procedures, and data analysis. (2) the methods for the assessment of operator`s mental workload (3) DAEXESS (data analysis and experiment evaluation supporting system). Also, we have established a experiment execution technologies through the preliminary experiments, such as the suitability evaluation of information display on a LSDP, the evaluation of information display on a LSDP, the evaluation of computerized operation procedure and an experiment of advanced alarm system (ADIOS). Finally, we developed the ITF including human machine simulator, telemetry system, an eye tracking system, an audio/video data measurement system, and three dimensional micro behaviour analysis system. (author). 81 refs., 68 tabs., 73 figs.

The Development of a Tool for Sustainable Building Design:

DEFF Research Database (Denmark)

Tine Ring Hansen, Hanne; Knudstrup, Mary-Ann

2009-01-01

for sustainable buildings, as well as, an analysis of the relationship between the different approaches (e.g. low-energy, environmental, green building, solar architecture, bio-climatic architecture etc.) to sustainable building design and these indicators. The paper furthermore discusses how sustainable......The understanding of sustainable building has changed over time along with the architectural interpretation of sustainability. The paper presents the results of a comparative analysis of the indicators found in different internationally acclaimed and Danish certification schemes and standards...... architecture will gain more focus in the coming years, thus, establishing the need for the development of a new tool and methodology, The paper furthermore describes the background and considerations involved in the development of a design support tool for sustainable building design. A tool which considers...

Development of tools for automatic generation of PLC code

CERN Document Server

Koutli, Maria; Rochez, Jacques

This Master thesis was performed at CERN and more specifically in the EN-ICE-PLC section. The Thesis describes the integration of two PLC platforms, that are based on CODESYS development tool, to the CERN defined industrial framework, UNICOS. CODESYS is a development tool for PLC programming, based on IEC 61131-3 standard, and is adopted by many PLC manufacturers. The two PLC development environments are, the SoMachine from Schneider and the TwinCAT from Beckhoff. The two CODESYS compatible PLCs, should be controlled by the SCADA system of Siemens, WinCC OA. The framework includes a library of Function Blocks (objects) for the PLC programs and a software for automatic generation of the PLC code based on this library, called UAB. The integration aimed to give a solution that is shared by both PLC platforms and was based on the PLCOpen XML scheme. The developed tools were demonstrated by creating a control application for both PLC environments and testing of the behavior of the code of the library.

Developing Tele-Operated Laboratories for Manufacturing Engineering Education. Platform for E-Learning and Telemetric Experimentation (PeTEX

Directory of Open Access Journals (Sweden)

A. Erman Tekkaya

2010-09-01

Full Text Available The aim of the PeTEX-project is to establish an e-Learning platform for the development, implementation, and delivery of educational training programs in the field of manufacturing engineering. The PeTEX team designs both: a technical platform for eLearning based on “Moodle” including distributed tele-operated experimentation facilities, and didactic and socio-technical requirements for a successful online learning community. User interfaces are deployed for remote access to instruments, data analysis and multiplexed data access via network protocols. Hence, the platform provides complex tools in order to perform various activities to support the educational process, from telemetric experimentation to virtual project groups for an entire community to the purpose of domain specific learning. This paper describes important steps of interdisciplinary participatory design and development of a remote lab-prototype in the field of manufacturing engineering.

Status of experimental data for the VHTR core design

Energy Technology Data Exchange (ETDEWEB)

Park, Won Seok; Chang, Jong Hwa; Park, Chang Kue

2004-05-01

The VHTR (Very High Temperature Reactor) is being emerged as a next generation nuclear reactor to demonstrate emission-free nuclear-assisted electricity and hydrogen production. The VHTR could be either a prismatic or pebble type helium cooled, graphite moderated reactor. The final decision will be made after the completion of the pre-conceptual design for each type. For the pre-conceptual design for both types, computational tools are being developed. Experimental data are required to validate the tools to be developed. Many experiments on the HTGR (High Temperature Gas-cooled Reactor) cores have been performed to confirm the design data and to validate the design tools. The applicability and availability of the existing experimental data have been investigated for the VHTR core design in this report.

Experimental development of power reactor intelligent control

International Nuclear Information System (INIS)

Edwards, R.M.; Garcia, H.E.; Lee, K.Y.

1992-01-01

The US nuclear utility industry initiated an ambitious program to modernize the control systems at a minimum of ten existing nuclear power plants by the year 2000. That program addresses urgent needs to replace obsolete instrumentation and analog controls with highly reliable state-of-the-art computer-based digital systems. Large increases in functionality that could theoretically be achieved in a distributed digital control system are not an initial priority in the industry program but could be logically considered in later phases. This paper discusses the initial development of an experimental sequence for developing, testing, and verifying intelligent fault-accommodating control for commercial nuclear power plant application. The sequence includes an ultra-safe university research reactor (TRIGA) and a passively safe experimental power plant (Experimental Breeder Reactor 2)

Effects of Different Cutting Patterns and Experimental Conditions on the Performance of a Conical Drag Tool

Science.gov (United States)

Copur, Hanifi; Bilgin, Nuh; Balci, Cemal; Tumac, Deniz; Avunduk, Emre

2017-06-01

This study aims at determining the effects of single-, double-, and triple-spiral cutting patterns; the effects of tool cutting speeds on the experimental scale; and the effects of the method of yield estimation on cutting performance by performing a set of full-scale linear cutting tests with a conical cutting tool. The average and maximum normal, cutting and side forces; specific energy; yield; and coarseness index are measured and compared in each cutting pattern at a 25-mm line spacing, at varying depths of cut per revolution, and using two cutting speeds on five different rock samples. The results indicate that the optimum specific energy decreases by approximately 25% with an increasing number of spirals from the single- to the double-spiral cutting pattern for the hard rocks, whereas generally little effect was observed for the soft- and medium-strength rocks. The double-spiral cutting pattern appeared to be more effective than the single- or triple-spiral cutting pattern and had an advantage of lower side forces. The tool cutting speed had no apparent effect on the cutting performance. The estimation of the specific energy by the yield based on the theoretical swept area was not significantly different from that estimated by the yield based on the muck weighing, especially for the double- and triple-spiral cutting patterns and with the optimum ratio of line spacing to depth of cut per revolution. This study also demonstrated that the cutterhead and mechanical miner designs, semi-theoretical deterministic computer simulations and empirical performance predictions and optimization models should be based on realistic experimental simulations. Studies should be continued to obtain more reliable results by creating a larger database of laboratory tests and field performance records for mechanical miners using drag tools.

User Studies: Developing Learning Strategy Tool Software for Children.

Science.gov (United States)

Fitzgerald, Gail E.; Koury, Kevin A.; Peng, Hsinyi

This paper is a report of user studies for developing learning strategy tool software for children. The prototype software demonstrated is designed for children with learning and behavioral disabilities. The tools consist of easy-to-use templates for creating organizational, memory, and learning approach guides for use in classrooms and at home.…

Developing and Validating a New Classroom Climate Observation Assessment Tool.

Science.gov (United States)

Leff, Stephen S; Thomas, Duane E; Shapiro, Edward S; Paskewich, Brooke; Wilson, Kim; Necowitz-Hoffman, Beth; Jawad, Abbas F

2011-01-01

The climate of school classrooms, shaped by a combination of teacher practices and peer processes, is an important determinant for children's psychosocial functioning and is a primary factor affecting bullying and victimization. Given that there are relatively few theoretically-grounded and validated assessment tools designed to measure the social climate of classrooms, our research team developed an observation tool through participatory action research (PAR). This article details how the assessment tool was designed and preliminarily validated in 18 third-, fourth-, and fifth-grade classrooms in a large urban public school district. The goals of this study are to illustrate the feasibility of a PAR paradigm in measurement development, ascertain the psychometric properties of the assessment tool, and determine associations with different indices of classroom levels of relational and physical aggression.

An Integrated Development Tool for a safety application using FBD language

Energy Technology Data Exchange (ETDEWEB)

Lee, Young Jun; Lee, Jang Soo; Lee, Dong Young [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

Regarding digitalizing the Nuclear Instrumentation and Control Systems, the application program responsible for the safety functions of Nuclear I and C Systems shall ensure the robustness of the safety function through development, testing, and validation roles for a life cycle process during software development. The importance of software in nuclear systems increases continuously. The integrated engineering tools to develop, test, and validate safety application programs require increasingly more complex parts among a number of components within nuclear digital I and C systems. This paper introduces the integrated engineering tool (SafeCASE-PLC) developed by our project. The SafeCASE-PLC is a kind of software engineering tool to develop, test, and validate the nuclear application program performed in an automatic controller

Developing a New Biophysical Tool to Combine Magneto-Optical Tweezers with Super-Resolution Fluorescence Microscopy

Directory of Open Access Journals (Sweden)

Zhaokun Zhou

2015-06-01

Full Text Available We present a novel experimental setup in which magnetic and optical tweezers are combined for torque and force transduction onto single filamentous molecules in a transverse configuration to allow simultaneous mechanical measurement and manipulation. Previously we have developed a super-resolution imaging module which, in conjunction with advanced imaging techniques such as Blinking assisted Localisation Microscopy (BaLM, achieves localisation precision of single fluorescent dye molecules bound to DNA of ~30 nm along the contour of the molecule; our work here describes developments in producing a system which combines tweezing and super-resolution fluorescence imaging. The instrument also features an acousto-optic deflector that temporally divides the laser beam to form multiple traps for high throughput statistics collection. Our motivation for developing the new tool is to enable direct observation of detailed molecular topological transformation and protein binding event localisation in a stretching/twisting mechanical assay that previously could hitherto only be deduced indirectly from the end-to-end length variation of DNA. Our approach is simple and robust enough for reproduction in the lab without the requirement of precise hardware engineering, yet is capable of unveiling the elastic and dynamic properties of filamentous molecules that have been hidden using traditional tools.

Development and Testing of the Church Environment Audit Tool.

Science.gov (United States)

Kaczynski, Andrew T; Jake-Schoffman, Danielle E; Peters, Nathan A; Dunn, Caroline G; Wilcox, Sara; Forthofer, Melinda

2018-05-01

In this paper, we describe development and reliability testing of a novel tool to evaluate the physical environment of faith-based settings pertaining to opportunities for physical activity (PA) and healthy eating (HE). Tool development was a multistage process including a review of similar tools, stakeholder review, expert feedback, and pilot testing. Final tool sections included indoor opportunities for PA, outdoor opportunities for PA, food preparation equipment, kitchen type, food for purchase, beverages for purchase, and media. Two independent audits were completed at 54 churches. Interrater reliability (IRR) was determined with Kappa and percent agreement. Of 218 items, 102 were assessed for IRR and 116 could not be assessed because they were not present at enough churches. Percent agreement for all 102 items was over 80%. For 42 items, the sample was too homogeneous to assess Kappa. Forty-six of the remaining items had Kappas greater than 0.60 (25 items 0.80-1.00; 21 items 0.60-0.79), indicating substantial to almost perfect agreement. The tool proved reliable and efficient for assessing church environments and identifying potential intervention points. Future work can focus on applications within faith-based partnerships to understand how church environments influence diverse health outcomes.

Developing Healthcare Data Analytics APPs with Open Data Science Tools.

Science.gov (United States)

Hao, Bibo; Sun, Wen; Yu, Yiqin; Xie, Guotong

2017-01-01

Recent advances in big data analytics provide more flexible, efficient, and open tools for researchers to gain insight from healthcare data. Whilst many tools require researchers to develop programs with programming languages like Python, R and so on, which is not a skill set grasped by many researchers in the healthcare data analytics area. To make data science more approachable, we explored existing tools and developed a practice that can help data scientists convert existing analytics pipelines to user-friendly analytics APPs with rich interactions and features of real-time analysis. With this practice, data scientists can develop customized analytics pipelines as APPs in Jupyter Notebook and disseminate them to other researchers easily, and researchers can benefit from the shared notebook to perform analysis tasks or reproduce research results much more easily.

Neutronic analyses and tools development efforts in the European DEMO programme

Energy Technology Data Exchange (ETDEWEB)

Fischer, U., E-mail: ulrich.fischer@kit.edu [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Bachmann, C. [European Fusion Development Agreement (EFDA), Garching (Germany); Bienkowska, B. [Association IPPLM-Euratom, IPPLM Warsaw/INP Krakow (Poland); Catalan, J.P. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Drozdowicz, K.; Dworak, D. [Association IPPLM-Euratom, IPPLM Warsaw/INP Krakow (Poland); Leichtle, D. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Fusion for Energy (F4E), Barcelona (Spain); Lengar, I. [MESCS-JSI, Ljubljana (Slovenia); Jaboulay, J.-C. [CEA, DEN, Saclay, DM2S, SERMA, F-91191 Gif-sur-Yvette (France); Lu, L. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Moro, F. [Associazione ENEA-Euratom, ENEA Fusion Division, Frascati (Italy); Mota, F. [Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Sanz, J. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Szieberth, M. [Budapest University of Technology and Economics (BME), Budapest (Hungary); Palermo, I. [Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Pampin, R. [Fusion for Energy (F4E), Barcelona (Spain); Porton, M. [Euratom/CCFE Fusion Association, Culham Science Centre for Fusion Energy (CCFE), Culham (United Kingdom); Pereslavtsev, P. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Ogando, F. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Rovni, I. [Budapest University of Technology and Economics (BME), Budapest (Hungary); and others

2014-10-15

Highlights: •Evaluation of neutronic tools for application to DEMO nuclear analyses. •Generation of a DEMO model for nuclear analyses based on MC calculations. •Nuclear analyses of the DEMO reactor equipped with a HCLL-type blanket. -- Abstract: The European Fusion Development Agreement (EFDA) recently launched a programme on Power Plant Physics and Technology (PPPT) with the aim to develop a conceptual design of a fusion demonstration reactor (DEMO) addressing key technology and physics issues. A dedicated part of the PPPT programme is devoted to the neutronics which, among others, has to define and verify requirements and boundary conditions for the DEMO systems. The quality of the provided data depends on the capabilities and the reliability of the computational tools. Accordingly, the PPPT activities in the area of neutronics include both DEMO nuclear analyses and development efforts on neutronic tools including their verification and validation. This paper reports on first neutronics studies performed for DEMO, and on the evaluation and further development of neutronic tools.

Neutronic analyses and tools development efforts in the European DEMO programme

International Nuclear Information System (INIS)

Fischer, U.; Bachmann, C.; Bienkowska, B.; Catalan, J.P.; Drozdowicz, K.; Dworak, D.; Leichtle, D.; Lengar, I.; Jaboulay, J.-C.; Lu, L.; Moro, F.; Mota, F.; Sanz, J.; Szieberth, M.; Palermo, I.; Pampin, R.; Porton, M.; Pereslavtsev, P.; Ogando, F.; Rovni, I.

2014-01-01

Highlights: •Evaluation of neutronic tools for application to DEMO nuclear analyses. •Generation of a DEMO model for nuclear analyses based on MC calculations. •Nuclear analyses of the DEMO reactor equipped with a HCLL-type blanket. -- Abstract: The European Fusion Development Agreement (EFDA) recently launched a programme on Power Plant Physics and Technology (PPPT) with the aim to develop a conceptual design of a fusion demonstration reactor (DEMO) addressing key technology and physics issues. A dedicated part of the PPPT programme is devoted to the neutronics which, among others, has to define and verify requirements and boundary conditions for the DEMO systems. The quality of the provided data depends on the capabilities and the reliability of the computational tools. Accordingly, the PPPT activities in the area of neutronics include both DEMO nuclear analyses and development efforts on neutronic tools including their verification and validation. This paper reports on first neutronics studies performed for DEMO, and on the evaluation and further development of neutronic tools

Status of the Design Tool Development for ITER TBM and Fusion Reactor System in Korea

International Nuclear Information System (INIS)

Jin, H. G.; Lee, D. W.; Shin, K. I.; Lee, E. H.; Yoon, J. S.; Kim, S. K.; Ahn, M. Y.; Cho, S.

2013-01-01

Korea has developed a Helium Cooled Molten Lithium (HCML) Test Blanket Module (TBM) and Helium Cooled Ceramic Reflector (HCCR) TBM to be tested in the ITER. The main purpose for developing the TBM is to develop the design technology for the DEMO and fusion reactor, and it should be proved experimentally in the ITER. Therefore, we have developed the design scheme and codes including the safety analysis capability for obtaining the license for testing in the ITER. In this study, the current status of the design tool development is summarized. For developing the design scheme and system codes of the ITER TBM program in Korea, the developed system codes such as MARS and GAMMA+ from Gen. IV projects were modified and verified considering the fusion application. For He coolant, 3D analysis and a McEligot correlation as the heat transfer model were proposed and validated considering the high heat from the plasma side and extreme temperature difference between the wall and fluid. For tritium behavior in the He coolant, the TBEC+GAMMA code was developed, and the oxidation layer growth and its permeation rate change were considered in this development. For a liquid metal breeder such as PbLi and Li, GAMMA-FR was developed including physical properties of the generation model and basic heat transfer model in them. For MHD simulation, the Miyazaki model was implemented in GAMMA, and it was validated successfully with the experimental data. Extending the capability of GAMMA-FR, a fusion system design code (SUPERCODE) is going to be coupled with a 3D neutronics code (MCNP)

Developing a verification tool for calculations dissemination through COBAYA

International Nuclear Information System (INIS)

Sabater Alcaraz, A.; Rucabado Rucabado, G.; Cuervo Gomez, D.; Garcia Herranz, N.

2014-01-01

The development of a software tool that automates the comparison of results with previous versions of the code and results using models of accuracy is crucial for implementing the code new functionalities. The work presented here has been the generation the mentioned tool and the set of reference cases that have set up the afore mentioned matrix. (Author)

Developing Expert Tools for the LHC

CERN Document Server

AUTHOR|(CDS)2160780; Timkó, Helga

2017-10-12

This Thesis describes software tools developed for automated, precision setting-up of low-power level radio frequency (LLRF) loops, which will help expert users to have better control and faster setting-up of the radio-frequency (RF) system in the Large Hadron Collider (LHC) experiment. The aim was to completely redesign the software architecture, to add new features, to improve certain algorithms, and to increase the automation.

A review of decision support, risk communication and patient information tools for thrombolytic treatment in acute stroke: lessons for tool developers.

Science.gov (United States)

Flynn, Darren; Ford, Gary A; Stobbart, Lynne; Rodgers, Helen; Murtagh, Madeleine J; Thomson, Richard G

2013-06-18

Tools to support clinical or patient decision-making in the treatment/management of a health condition are used in a range of clinical settings for numerous preference-sensitive healthcare decisions. Their impact in clinical practice is largely dependent on their quality across a range of domains. We critically analysed currently available tools to support decision making or patient understanding in the treatment of acute ischaemic stroke with intravenous thrombolysis, as an exemplar to provide clinicians/researchers with practical guidance on development, evaluation and implementation of such tools for other preference-sensitive treatment options/decisions in different clinical contexts. Tools were identified from bibliographic databases, Internet searches and a survey of UK and North American stroke networks. Two reviewers critically analysed tools to establish: information on benefits/risks of thrombolysis included in tools, and the methods used to convey probabilistic information (verbal descriptors, numerical and graphical); adherence to guidance on presenting outcome probabilities (IPDASi probabilities items) and information content (Picker Institute Checklist); readability (Fog Index); and the extent that tools had comprehensive development processes. Nine tools of 26 identified included information on a full range of benefits/risks of thrombolysis. Verbal descriptors, frequencies and percentages were used to convey probabilistic information in 20, 19 and 18 tools respectively, whilst nine used graphical methods. Shortcomings in presentation of outcome probabilities (e.g. omitting outcomes without treatment) were identified. Patient information tools had an aggregate median Fog index score of 10. None of the tools had comprehensive development processes. Tools to support decision making or patient understanding in the treatment of acute stroke with thrombolysis have been sub-optimally developed. Development of tools should utilise mixed methods and

Development of an improved low profile hub seal refurbishment tool

International Nuclear Information System (INIS)

Wagg, L.

1997-01-01

The hub seal area of a fuel channel feeder coupling can be exposed to oxygen in the atmosphere if protective measures are not taken during maintenance outages. Exposure to oxygen can lead to pitting of the hub seal area. Although this is a rare occurrence, the resulting possibility of the feeder coupling leakage led to the development of a feeder hub refurbishment tool. To reduce time and man-rem exposure during feeder hub seal refurbishment, an improved low profile hub seat refurbishing tool has been developed. The improved tool design will allow for quick and controlled removal of material, and the restoration of a roll-burnished finish equivalent to the original requirements. The new tool can be used in maintenance operations, with the end fitting present, as well as under retube-type circumstances, with the end fitting removed. (author)

Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

Directory of Open Access Journals (Sweden)

Dong Y.

2015-01-01

Full Text Available In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tribological behaviour of aluminium differed great from that of steel regardless of the counterpart material. Highly reactive aluminium had a strong tendency to solder with tool surfaces during dry sliding. However, the lubricity of gray cast irons can be significantly improved by Ni-BN and DLC coatings. The coefficient of friction reduced from about 0.5 for untreated cast irons to about 0.2 sliding against aluminium. Duplex treatment combining plasma nitrocarburising with low-friction coatings showed superior durability than both DLC and Ni-BN coatings.

Conceptual framework for development of comprehensive e-health evaluation tool.

Science.gov (United States)

Khoja, Shariq; Durrani, Hammad; Scott, Richard E; Sajwani, Afroz; Piryani, Usha

2013-01-01

The main objective of this study was to develop an e-health evaluation tool based on a conceptual framework including relevant theories for evaluating use of technology in health programs. This article presents the development of an evaluation framework for e-health programs. The study was divided into three stages: Stage 1 involved a detailed literature search of different theories and concepts on evaluation of e-health, Stage 2 plotted e-health theories to identify relevant themes, and Stage 3 developed a matrix of evaluation themes and stages of e-health programs. The framework identifies and defines different stages of e-health programs and then applies evaluation theories to each of these stages for development of the evaluation tool. This framework builds on existing theories of health and technology evaluation and presents a conceptual framework for developing an e-health evaluation tool to examine and measure different factors that play a definite role in the success of e-health programs. The framework on the horizontal axis divides e-health into different stages of program implementation, while the vertical axis identifies different themes and areas of consideration for e-health evaluation. The framework helps understand various aspects of e-health programs and their impact that require evaluation at different stages of the life cycle. The study led to the development of a new and comprehensive e-health evaluation tool, named the Khoja-Durrani-Scott Framework for e-Health Evaluation.

China adopts rural tourism as a development tool

OpenAIRE

Wo, Zhuo

2006-01-01

In recent years, rural tourism has become ever more prominent as a tool to increase visitors' awareness and as an attraction to a destination as well as a tool for economic development in the countryside of China. Rural tourism is a new type of tourism industry, which makes rural cmmunities as its sites, rural distinctive production, living styles and idyllic landscapes as its objects. The writer aims to analyze the theory of tourism life cycle proposed by Butler, current problems, types, mod...

INTELLECTUAL PROPERTY RIGHTS ISSUES FOR RESEARCH TOOLS IN BIOTECHNOLOGY RESEARCH

Directory of Open Access Journals (Sweden)

Rekha Chaturvedi

2015-09-01

Full Text Available The research tools refer to the resources researchers need to use in experimental work. In Biotechnology, these can include cell lines, monoclonal antibodies, reagents, animal models, growth factors, combinatorial chemistry libraries, drug and drug targets, clones and cloning tools (such as PCR, method, laboratory equipment and machines, database and computer software. Research tools therefore serve as basis for upstream research to improve the present product or process. There are several challenges in the way of using patented research tools. IP issues with regard to research tools are important and may sometime pose hindrance for researchers. Hence in the case of patented research tools, IPR issues can compose a major hurdle for technology development. In majority instances research tools are permitted through MTAs for academic research and for imparting education. TRIPS provides a provision for exception to patent rights for experimental use of patented technology in scientific research and several countries including India have included this provision in their patent legislation. For commercially important work, licensing of research tools can be based on royalty or one time lump sum payment. Some patent owners of important high-end research tools for development of platform technology create problems in licensing which can impede research. Usually cost of a commercially available research tool is built up in its price.

Final Report "CoDeveloper: A Secure Web-Invocable Collaborative Software Development Tool"

Energy Technology Data Exchange (ETDEWEB)

Svetlana Shasharina

2005-11-27

Modern scientific simulations generate large datasets at remote sites with appropriate resources (supercomputers and clusters). Bringing these large datasets to the computers of all members of a distributed team of collaborators is often impractical or even impossible: there might not be enough bandwidth, storage capacity or appropriate data analysis and visualization tools locally available. To address the need to access remote data, avoid heavy Internet traffic and unnecessary data replication, Tech-X Corporation developed a tool, which allows running remote data visualization collaboratively and sharing the visualization objects as they get generated. The size of these objects is typically much smaller than the size of the original data. For marketing reasons, we renamed the product CoReViz. The detailed information on this product can be found at http://www.txcorp.com/products/CoReViz/. We installed and tested this tool at multiple machines at Tech-X and on seaborg at NERSC. In what follows, we give a detailed description of this tool.

ProteoWizard: open source software for rapid proteomics tools development.

Science.gov (United States)

Kessner, Darren; Chambers, Matt; Burke, Robert; Agus, David; Mallick, Parag

2008-11-01

The ProteoWizard software project provides a modular and extensible set of open-source, cross-platform tools and libraries. The tools perform proteomics data analyses; the libraries enable rapid tool creation by providing a robust, pluggable development framework that simplifies and unifies data file access, and performs standard proteomics and LCMS dataset computations. The library contains readers and writers of the mzML data format, which has been written using modern C++ techniques and design principles and supports a variety of platforms with native compilers. The software has been specifically released under the Apache v2 license to ensure it can be used in both academic and commercial projects. In addition to the library, we also introduce a rapidly growing set of companion tools whose implementation helps to illustrate the simplicity of developing applications on top of the ProteoWizard library. Cross-platform software that compiles using native compilers (i.e. GCC on Linux, MSVC on Windows and XCode on OSX) is available for download free of charge, at http://proteowizard.sourceforge.net. This website also provides code examples, and documentation. It is our hope the ProteoWizard project will become a standard platform for proteomics development; consequently, code use, contribution and further development are strongly encouraged.

Boosted top: experimental tools overview

CERN Document Server

Usai, Emanuele

2015-01-01

An overview of tools and methods for the reconstruction of high-boost top quark decays at the LHC is given in this report. The focus is on hadronic decays, in particular an overview of the current status of top quark taggers in physics analyses is presented. The most widely used jet substructure techniques, normally used in combination with top quark taggers, are reviewed. Special techniques to treat pileup in large cone jets are described, along with a comparison of the performance of several boosted top quark reconstruction techniques.

Developing a Social Autopsy Tool for Dengue Mortality: A Pilot Study

Science.gov (United States)

Arauz, María José; Ridde, Valéry; Hernández, Libia Milena; Charris, Yaneth; Carabali, Mabel; Villar, Luis Ángel

2015-01-01

Background Dengue fever is a public health problem in the tropical and sub-tropical world. Dengue cases have grown dramatically in recent years as well as dengue mortality. Colombia has experienced periodic dengue outbreaks with numerous dengue related-deaths, where the Santander department has been particularly affected. Although social determinants of health (SDH) shape health outcomes, including mortality, it is not yet understood how these affect dengue mortality. The aim of this pilot study was to develop and pre-test a social autopsy (SA) tool for dengue mortality. Methods and Findings The tool was developed and pre-tested in three steps. First, dengue fatal cases and ‘near misses’ (those who recovered from dengue complications) definitions were elaborated. Second, a conceptual framework on determinants of dengue mortality was developed to guide the construction of the tool. Lastly, the tool was designed and pre-tested among three relatives of fatal cases and six near misses in 2013 in the metropolitan zone of Bucaramanga. The tool turned out to be practical in the context of dengue mortality in Colombia after some modifications. The tool aims to study the social, individual, and health systems determinants of dengue mortality. The tool is focused on studying the socioeconomic position and the intermediary SDH rather than the socioeconomic and political context. Conclusions The SA tool is based on the scientific literature, a validated conceptual framework, researchers’ and health professionals’ expertise, and a pilot study. It is the first time that a SA tool has been created for the dengue mortality context. Our work furthers the study on SDH and how these are applied to neglected tropical diseases, like dengue. This tool could be integrated in surveillance systems to provide complementary information on the modifiable and avoidable death-related factors and therefore, be able to formulate interventions for dengue mortality reduction. PMID:25658485

Development of pipe welding, cutting and inspection tools for the ITER blanket

International Nuclear Information System (INIS)

Oka, Kiyoshi; Ito, Akira; Taguchi, Kou; Takiguchi, Yuji; Takahashi, Hiroyuki; Tada, Eisuke

1999-07-01

In D-T burning reactors such as International Thermonuclear Experimental Reactor (ITER), an internal access welding/cutting of blanket cooling pipe with bend sections is inevitably required because of spatial constraint due to nuclear shield and available port opening space. For this purpose, internal access pipe welding/cutting/inspection tools for manifolds and branch pipes are being developed according to the agreement of the ITER R and D task (T329). A design concept of welding/cutting processing head with a flexible optical fiber has been developed and the basic feasibility studies on welding, cutting and rewelding are performed using stainless steel plate (SS316L). In the same way, a design concept of inspection head with a non-destructive inspection probe (including a leak-testing probe) has been developed and the basic characteristic tests are performed using welded stainless steel pipes. In this report, the details of welding/cutting/inspection heads for manifolds and branch pipes are described, together with the basic experiment results relating to the welding/cutting and inspection. In addition, details of a composite type optical fiber, which can transmit both the high-power YAG laser and visible rays, is described. (author)

Development of a fast, lean and agile direct pelletization process using experimental design techniques.

Science.gov (United States)

Politis, Stavros N; Rekkas, Dimitrios M

2017-04-01

A novel hot melt direct pelletization method was developed, characterized and optimized, using statistical thinking and experimental design tools. Mixtures of carnauba wax (CW) and HPMC K100M were spheronized using melted gelucire 50-13 as a binding material (BM). Experimentation was performed sequentially; a fractional factorial design was set up initially to screen the factors affecting the process, namely spray rate, quantity of BM, rotor speed, type of rotor disk, lubricant-glidant presence, additional spheronization time, powder feeding rate and quantity. From the eight factors assessed, three were further studied during process optimization (spray rate, quantity of BM and powder feeding rate), at different ratios of the solid mixture of CW and HPMC K100M. The study demonstrated that the novel hot melt process is fast, efficient, reproducible and predictable. Therefore, it can be adopted in a lean and agile manufacturing setting for the production of flexible pellet dosage forms with various release rates easily customized between immediate and modified delivery.

Designing the user experience of game development tools

CERN Document Server

Lightbown, David

2015-01-01

The Big Green Button My Story Who Should Read this Book? Companion Website and Twitter Account Before we BeginWelcome to Designing the User Experience of Game Development ToolsWhat Will We Learn in This Chapter?What Is This Book About?Defining User ExperienceThe Value of Improving the User Experience of Our ToolsParallels Between User Experience and Game DesignHow Do People Benefit From an Improved User Experience?Finding the Right BalanceWrapping UpThe User-Centered Design ProcessWhat Will We

Designing and Developing Web-Based Administrative Tools for Program Management

Science.gov (United States)

Gutensohn, Michael

2017-01-01

The task assigned for this internship was to develop a new tool for tracking projects, their subsystems, the leads, backups, and other employees assigned to them, as well as all the relevant information related to the employee (WBS (time charge) codes, time distribution, certifications, and assignments). Currently, this data is tracked manually using a number of different spreadsheets and other tools simultaneously by a number of different people; some of these documents are then merged into one large document. This often leads to inconsistencies and loss in data due to human error. By simplifying the process of tracking this data and aggregating it into a single tool, it is possible to significantly decrease the potential for human error and time spent collecting and checking this information. II. Objective The main objective of this internship is to develop a web-based tool using Ruby on Rails to serve as a method of easily tracking projects, subsystems, and points of contact, along with employees, their assignments, time distribution, certifications, and contact information. Additionally, this tool must be capable of generating a number of different reports based on the data collected. It was important that this tool deliver all of this information using a readable and intuitive interface.

ADVANCED AND RAPID DEVELOPMENT OF DYNAMIC ANALYSIS TOOLS FOR JAVA

Directory of Open Access Journals (Sweden)

Alex Villazón

2012-01-01

Full Text Available Low-level bytecode instrumentation techniques are widely used in many software-engineering tools for the Java Virtual Machine (JVM, that perform some form of dynamic program analysis, such as profilers or debuggers. While program manipulation at the bytecode level is very flexible, because the possible bytecode transformations are not restricted, tool development based on this technique is tedious and error-prone. As a promising alternative, the specification of bytecode instrumentation at a higher level using aspect-oriented programming (AOP can reduce tool development time and cost. Unfortunately, prevailing AOP frameworks lack some features that are essential for certain dynamic analyses. In this article, we focus on three common shortcomings in AOP frameworks with respect to the development of aspect-based tools - (1 the lack of mechanisms for passing data between woven advices in local variables, (2 the support for user-defined static analyses at weaving time, and (3 the absence of pointcuts at the level of individual basic blocks of code. We propose @J, an annotation-based AOP language and weaver that integrates support for these three features. The benefits of the proposed features are illustrated with concrete examples.

Remote tool development at the Interim Examination and Maintenance (IEM) cell

International Nuclear Information System (INIS)

Kalk, J.J.

1986-07-01

Tightening fasteners remotely in a hot cell can be a very exasperating experience. In many places, viewing is difficult and work sometimes must be done using mirrors and/or cameras for viewing. If electromechanical manipulators are used, the operator has no ''feel'', which often can result in broken equipment. At the Interim Examination and Maintenance (IEM) Cell, where reactor components from the Fast Flux Test Facility (FFTF) are disassembled, several tools have been developed for tightening fasteners under these conditions. The philosophy used for this tool development is to use inexpensive commercially available tools with minimal modification for in-cell use. This philosophy was adopted after spending several years unsuccessfully trying to develop a special electric impact wrench

Investigation of wear land and rate of locally made HSS cutting tool

Science.gov (United States)

Afolalu, S. A.; Abioye, A. A.; Dirisu, J. O.; Okokpujie, I. P.; Ajayi, O. O.; Adetunji, O. R.

2018-04-01

Production technology and machining are inseparable with cutting operation playing important roles. Investigation of wear land and rate of cutting tool developed locally (C=0.56%) with an HSS cutting tool (C=0.65%) as a control was carried out. Wear rate test was carried out using Rotopol -V and Impact tester. The samples (12) of locally made cutting tools and one (1) sample of a control HSS cutting tool were weighed to get the initial weight and grit was fixed at a point for the sample to revolve at a specific time of 10 mins interval. Approach of macro transfer particles that involved mechanism of abrasion and adhesion which was termed as mechanical wear to handle abrasion adhesion processes was used in developing equation for growth wear at flank. It was observed from the wear test that best minimum wear rate of 1.09 × 10-8 and 2.053 × 10-8 for the tools developed and control were measured. MATLAB was used to simulate the wear land and rate under different conditions. Validated results of both the experimental and modeling showed that cutting speed has effect on wear rate while cutting time has predicted measure on wear land. Both experimental and modeling result showed best performances of tools developed over the control.

Oral Development for LSP via Open Source Tools

Directory of Open Access Journals (Sweden)

Alejandro Curado Fuentes

2015-11-01

Full Text Available For the development of oral abilities in LSP, few computer-based teaching and learning resources have actually focused intensively on web-based listening and speaking. Many more do on reading, writing, vocabulary and grammatical activities. Our aim in this paper is to approach oral communication in the online environment of Moodle by striving to make it suitable for a learning project which incorporates oral skills. The paper describes a blended process in which both individual and collaborative learning strategies can be combined and exploited through the implementation of specific tools and resources which may go hand in hand with traditional face-to-face conversational classes. The challenge with this new perspective is, ultimately, to provide effective tools for oral LSP development in an apparently writing skill-focused medium.

EXPERIMENTAL MONTAGE USED TO STUDY THE VIBRATION OF THE DRILL TOOL IN THE PROCESS OF MANUFACTURING THE BRONZE MATERIALS

Directory of Open Access Journals (Sweden)

Cosmin-Mihai MIRIŢOIU

2013-05-01

Full Text Available In this paper we present the experimental setup used to study the vibration of the drill tool, during the drilling of the bronze products. In this paper the vibrations are analyzed during the drilling on the universal lathe machines. This time, the tool is fixed in the movable boring head and will make a translation movement with constant feeding, and the workpiece spins around its axis of symmetry and it is fixed in the spindle head stock of the universal lathe machine

Development of a data capture tool for researching tech entrepreneurship

DEFF Research Database (Denmark)

Andersen, Jakob Axel Bejbro; Howard, Thomas J.; McAloone, Tim C.

2014-01-01

. This paper elucidates the requirements for such tools by drawing on knowledge of the entrepreneurial phenomenon and by building on the existing research tools used in design research. On this basis, the development of a capture method for tech startup processes is described and its potential discussed....

Development of a Multi-Domain Assessment Tool for Quality Improvement Projects.

Science.gov (United States)

Rosenbluth, Glenn; Burman, Natalie J; Ranji, Sumant R; Boscardin, Christy K

2017-08-01

Improving the quality of health care and education has become a mandate at all levels within the medical profession. While several published quality improvement (QI) assessment tools exist, all have limitations in addressing the range of QI projects undertaken by learners in undergraduate medical education, graduate medical education, and continuing medical education. We developed and validated a tool to assess QI projects with learner engagement across the educational continuum. After reviewing existing tools, we interviewed local faculty who taught QI to understand how learners were engaged and what these faculty wanted in an ideal assessment tool. We then developed a list of competencies associated with QI, established items linked to these competencies, revised the items using an iterative process, and collected validity evidence for the tool. The resulting Multi-Domain Assessment of Quality Improvement Projects (MAQIP) rating tool contains 9 items, with criteria that may be completely fulfilled, partially fulfilled, or not fulfilled. Interrater reliability was 0.77. Untrained local faculty were able to use the tool with minimal guidance. The MAQIP is a 9-item, user-friendly tool that can be used to assess QI projects at various stages and to provide formative and summative feedback to learners at all levels.

Latest Developments in PVD Coatings for Tooling

Directory of Open Access Journals (Sweden)

Gabriela Strnad

2010-06-01

Full Text Available The paper presents the recent developments in the field of PVD coating for manufacturing tools. A review of monoblock, multilayer, nanocomposite, DLC and oxinitride coatings is discussed, with the emphasis on coatings which enables the manufacturers to implement high productivity processes such as high speed cutting and dry speed machining.

Research tools | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Through training materials and guides, we aim to build skills and knowledge to enhance the quality of development research. We also offer free access to our database of funded research projects, known as IDRIS+, and our digital library. Our research tools include. Guide to research databases at IDRC: How to access and ...

Assembly tool design

International Nuclear Information System (INIS)

Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

1996-06-01

The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

Experimental Study of Tool Wear and Grinding Forces During BK-7 Glass Micro-grinding with Modified PCD Tool

Science.gov (United States)

Pratap, A.; Sahoo, P.; Patra, K.; Dyakonov, A. A.

2017-09-01

This study focuses on the improvement in grinding performance of BK-7 glass using polycrystalline diamond micro-tool. Micro-tools are modified using wire EDM and performance of modified tools is compared with that of as received tool. Tool wear of different types of tools are observed. To quantify the tool wear, a method based on weight loss of tool is introduced in this study. Modified tools significantly reduce tool wear in comparison to the normal tool. Grinding forces increase with machining time due to tool wear. However, modified tools produce lesser forces thus can improve life of the PCD micro-grinding tool.

Experimental Investigation of Surface Layer Properties of High Thermal Conductivity Tool Steel after Electrical Discharge Machining

Directory of Open Access Journals (Sweden)

Rafał Świercz

2017-12-01

Full Text Available New materials require the use of advanced technology in manufacturing complex shape parts. One of the modern materials widely used in the tool industry for injection molds or hot stamping dies is high conductivity tool steel (HTCS 150. Due to its hardness (55 HRC and thermal conductivity at 66 W/mK, this material is difficult to machine by conventional treatment and is being increasingly manufactured by nonconventional technology such as electrical discharge machining (EDM. In the EDM process, material is removed from the workpiece by a series of electrical discharges that cause changes to the surface layers properties. The final state of the surface layer directly influences the durability of the produced elements. This paper presents the influence of EDM process parameters: discharge current Ic and the pulse time ton on surface layer properties. The experimental investigation was carried out with an experimental methodology design. Surface layers properties including roughness 3D parameters, the thickness of the white layer, heat affected zone, tempered layer and occurring micro cracks were investigated and described. The influence of the response surface methodology (RSM of discharge current Ic and the pulse time ton on the thickness of the white layer and roughness parameters Sa, Sds and Ssc were described and established.

Online Experimentation in Education and Training

Directory of Open Access Journals (Sweden)

Maria Teresa Restivo

2014-03-01

Full Text Available The increasing use of emergent technologies in industry, medicine, research, training and education attests to the relevance of their integration in teaching/learning approaches. Online experimentation comprises remote and virtual experimentation also supported and complemented by other online tools that incorporate necessarily the use of emergent technologies. The present work synthesizes the final outcomes of a project aiming to develop, use and disseminate Online Experimentation, funded by the Calouste Gulbenkian Foundation. Some application examples are given to illustrate the use of online experimentation on different contexts, such as secondary and higher education (STEM, lifelong learning or industrial training.

Building flexible, distributed collaboration tools using type-based publish/subscribe - The Distributed Knight case

DEFF Research Database (Denmark)

Hansen, Klaus Marius; Damm, Christian Heide

2004-01-01

Distributed collaboration is becoming increasingly impor tant also in software development. Combined with an in creasing interest in experimental and agile approaches to software development, this poses challenges to tool sup port for software development. Specifically, tool support is needed...... for flexible, distributed collaboration. We intro duce the Distributed Knight tool that provides flexible and lightweight support for distributed collaboration in object oriented modelling. The Distributed Knight implementa tion builds crucially on the type-based publish/subscribe distributed communication...... paradigm, which provides an effective and natural abstraction for developing distributed collaboration tools....

Modeling the milling tool wear by using an evolutionary SVM-based model from milling runs experimental data

Science.gov (United States)

Nieto, Paulino José García; García-Gonzalo, Esperanza; Vilán, José Antonio Vilán; Robleda, Abraham Segade

2015-12-01

The main aim of this research work is to build a new practical hybrid regression model to predict the milling tool wear in a regular cut as well as entry cut and exit cut of a milling tool. The model was based on Particle Swarm Optimization (PSO) in combination with support vector machines (SVMs). This optimization mechanism involved kernel parameter setting in the SVM training procedure, which significantly influences the regression accuracy. Bearing this in mind, a PSO-SVM-based model, which is based on the statistical learning theory, was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. To accomplish the objective of this study, the experimental dataset represents experiments from runs on a milling machine under various operating conditions. In this way, data sampled by three different types of sensors (acoustic emission sensor, vibration sensor and current sensor) were acquired at several positions. A second aim is to determine the factors with the greatest bearing on the milling tool flank wear with a view to proposing milling machine's improvements. Firstly, this hybrid PSO-SVM-based regression model captures the main perception of statistical learning theory in order to obtain a good prediction of the dependence among the flank wear (output variable) and input variables (time, depth of cut, feed, etc.). Indeed, regression with optimal hyperparameters was performed and a determination coefficient of 0.95 was obtained. The agreement of this model with experimental data confirmed its good performance. Secondly, the main advantages of this PSO-SVM-based model are its capacity to produce a simple, easy-to-interpret model, its ability to estimate the contributions of the input variables, and its computational efficiency. Finally, the main conclusions of this study are exposed.

The experimental and technological developments reactor

International Nuclear Information System (INIS)

Carbonnier, J.L.

2003-01-01

THis presentation concerns the REDT, gas coolant reactor for experimental and technological developments. The specifications and the research programs concerning this reactor are detailed;: materials, safety aspects, core physic, the corresponding fuel cycle, the reactor cycle and the program management. (A.L.B.)

Development Of Remote Hanford Connector Gasket Replacement Tooling For DWPF

International Nuclear Information System (INIS)

Krementz, D.; Coughlin, Jeffrey

2009-01-01

The Defense Waste Processing Facility (DWPF) requested the Savannah River National Laboratory (SRNL) to develop tooling and equipment to remotely replace gaskets in mechanical Hanford connectors to reduce personnel radiation exposure as compared to the current hands-on method. It is also expected that radiation levels will continually increase with future waste streams. The equipment is operated in the Remote Equipment Decontamination Cell (REDC), which is equipped with compressed air, two master-slave manipulators (MSM's) and an electro-mechanical manipulator (EMM) arm for operation of the remote tools. The REDC does not provide access to electrical power, so the equipment must be manually or pneumatically operated. The MSM's have a load limit at full extension of ten pounds, which limited the weight of the installation tool. In order to remotely replace Hanford connector gaskets several operations must be performed remotely, these include: removal of the spent gasket and retaining ring (retaining ring is also called snap ring), loading the new snap ring and gasket into the installation tool and installation of the new gasket into the Hanford connector. SRNL developed and tested tools that successfully perform all of the necessary tasks. Removal of snap rings from horizontal and vertical connectors is performed by separate air actuated retaining ring removal tools and is manipulated in the cell by the MSM. In order install a new gasket, the snap ring loader is used to load a new snap ring into a groove in the gasket installation tool. A new gasket is placed on the installation tool and retained by custom springs. An MSM lifts the installation tool and presses the mounted gasket against the connector block. Once the installation tool is in position, the gasket and snap ring are installed onto the connector by pneumatic actuation. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and

Developing a tool for the preparation of GMP audit of pharmaceutical contract manufacturer.

Science.gov (United States)

Linna, Anu; Korhonen, Mirka; Mannermaa, Jukka-Pekka; Airaksinen, Marja; Juppo, Anne Mari

2008-06-01

Outsourcing is rapidly growing in the pharmaceutical industry. When the manufacturing activities are outsourced, control of the product's quality has to be maintained. One way to confirm contract manufacturer's GMP (Good Manufacturing Practice) compliance is auditing. Audits can be supported for instance by using GMP questionnaires. The objective of this study was to develop a tool for the audit preparation of pharmaceutical contract manufacturers and to validate its contents by using Delphi method. At this phase of the study the tool was developed for non-sterile finished product contract manufacturers. A modified Delphi method was used with expert panel consisting of 14 experts from pharmaceutical industry, authorities and university. The content validity of the developed tool was assessed by a Delphi questionnaire round. The response rate in Delphi questionnaire round was 86%. The tool consisted of 103 quality items, from which 90 (87%) achieved the pre-defined agreement rate level (75%). Thirteen quality items which did not achieve the pre-defined agreement rate were excluded from the tool. The expert panel suggested only minor changes to the tool. The results show that the content validity of the developed audit preparation tool was good.

Developing Tool Support for Problem Diagrams with CPN and VDM++

DEFF Research Database (Denmark)

Tjell, Simon; Lassen, Kristian Bisgaard

2008-01-01

In this paper, we describe ongoing work on the development of tool support for formal description of domains found in Problem Diagrams. The purpose of the tool is to handle the generation of a CPN model based on a collection of Problem Diagrams. The Problem Diagrams are used for representing the ...

Development and Evaluation of Computer-Based Laboratory Practical Learning Tool

Science.gov (United States)

Gandole, Y. B.

2006-01-01

Effective evaluation of educational software is a key issue for successful introduction of advanced tools in the curriculum. This paper details to developing and evaluating a tool for computer assisted learning of science laboratory courses. The process was based on the generic instructional system design model. Various categories of educational…

Development of computer-aided software engineering tool for sequential control of JT-60U

International Nuclear Information System (INIS)

Shimono, M.; Akasaka, H.; Kurihara, K.; Kimura, T.

1995-01-01

Discharge sequential control (DSC) is an essential control function for the intermittent and pulse discharge operation of a tokamak device, so that many subsystems may work with each other in correct order and/or synchronously. In the development of the DSC program, block diagrams of logical operation for sequential control are illustrated in its design at first. Then, the logical operators and I/O's which are involved in the block diagrams are compiled and converted to a certain particular form. Since the block diagrams of the sequential control amounts to about 50 sheets in the case of the JT-60 upgrade tokamak (JT-60U) high power discharge and the above steps of the development have been performed manually so far, a great effort has been required for the program development. In order to remove inefficiency in such development processes, a computer-aided software engineering (CASE) tool has been developed on a UNIX workstation. This paper reports how the authors design it for the development of the sequential control programs. The tool is composed of the following three tools: (1) Automatic drawing tool, (2) Editing tool, and (3) Trace tool. This CASE tool, an object-oriented programming tool having graphical formalism, can powerfully accelerate the cycle for the development of the sequential control function commonly associated with pulse discharge in a tokamak fusion device

Process-Based Quality (PBQ) Tools Development; TOPICAL

International Nuclear Information System (INIS)

Cummins, J.L.

2001-01-01

The objective of this effort is to benchmark the development of process-based quality tools for application in CAD (computer-aided design) model-based applications. The processes of interest are design, manufacturing, and quality process applications. A study was commissioned addressing the impact, current technologies, and known problem areas in application of 3D MCAD (3-dimensional mechanical computer-aided design) models and model integrity on downstream manufacturing and quality processes. The downstream manufacturing and product quality processes are profoundly influenced and dependent on model quality and modeling process integrity. The goal is to illustrate and expedite the modeling and downstream model-based technologies for available or conceptual methods and tools to achieve maximum economic advantage and advance process-based quality concepts

FEM-DEM coupling simulations of the tool wear characteristics in prestressed machining superalloy

Directory of Open Access Journals (Sweden)

Ruitao Peng

2016-01-01

Full Text Available Due to the complicated contact loading at the tool-chip interface, ceramic tool wear in prestressed machining superalloy is rare difficult to evaluate only by experimental approaches. This study aims to develop a methodology to predict the tool wear evolution by using combined FEM and DEM numerical simulations. Firstly, a finite element model for prestressed cutting is established, subsequently a discrete element model to describe the tool-chip behaviour is established based on the obtained boundary conditions by FEM simulations, finally, simulated results are experimentally validated. The predicted tool wear results show nice agreement with experiments, the simulation indicates that, within a certain range, higher cutting speed effectively results in slighter wear of Sialon ceramic tools, and deeper depth of cut leads to more serious tool wear.

Surrogate Analysis and Index Developer (SAID) tool

Science.gov (United States)

Domanski, Marian M.; Straub, Timothy D.; Landers, Mark N.

2015-10-01

The use of acoustic and other parameters as surrogates for suspended-sediment concentrations (SSC) in rivers has been successful in multiple applications across the Nation. Tools to process and evaluate the data are critical to advancing the operational use of surrogates along with the subsequent development of regression models from which real-time sediment concentrations can be made available to the public. Recent developments in both areas are having an immediate impact on surrogate research and on surrogate monitoring sites currently (2015) in operation.

Experimental Validation of an FSW Model with an Enhanced Friction Law: Application to a Threaded Cylindrical Pin Tool

Directory of Open Access Journals (Sweden)

Narges Dialami

2017-11-01

Full Text Available This work adopts a fast and accurate two-stage computational strategy for the analysis of FSW (Friction stir welding processes using threaded cylindrical pin tools. The coupled thermo-mechanical problem is equipped with an enhanced friction model to include the effect of non-uniform pressure distribution under the pin shoulder. The overall numerical strategy is successfully validated by the experimental measurements provided by the industrial partner (Sapa. The verification of the numerical model using the experimental evidence is not only accomplished in terms of temperature evolution but also in terms of torque, longitudinal, transversal and vertical forces.

Establishment of experimental equipments in irradiation technology development building

International Nuclear Information System (INIS)

Ishida, Takuya; Tanimoto, Masataka; Shibata, Akira; Kitagishi, Shigeru; Saito, Takashi; Ohmi, Masao; Nakamura, Jinichi; Tsuchiya, Kunihiko

2011-06-01

The Neutron Irradiation and Testing Reactor Center has developed new irradiation technologies to provide irradiation data with high technical value for the resume of the Japan Materials Testing Reactor (JMTR). For the purpose to perform assembling of capsules, materials tests, materials inspection and analysis of irradiation specimens for the development of irradiation capsules, improvement and maintenance of facilities were performed. From the viewpoint of effective use of existing buildings in the Oarai research and development center, the RI application development building was refurbished and maintained for above-mentioned purpose. The RI application development building is a released controlled area, and was used as storage of experimental equipments and stationeries. The building was named 'Irradiation Technology Development Building' after it refurbished and maintained. Eight laboratories were maintained based on the purpose of use, and the installation of the experimental apparatuses was started. A basic management procedure of the Irradiation Technology Development Building was established and has been operated. This report describes the refurbish work of the RI application development building, the installation and operation method of the experimental apparatuses and the basic management procedure of the Irradiation Technology Development Building. (author)

Demonstration of Decision Support Tools for Sustainable Development

Energy Technology Data Exchange (ETDEWEB)

Shropshire, David Earl; Jacobson, Jacob Jordan; Berrett, Sharon; Cobb, D. A.; Worhach, P.

2000-11-01

The Demonstration of Decision Support Tools for Sustainable Development project integrated the Bechtel/Nexant Industrial Materials Exchange Planner and the Idaho National Engineering and Environmental Laboratory System Dynamic models, demonstrating their capabilities on alternative fuel applications in the Greater Yellowstone-Teton Park system. The combined model, called the Dynamic Industrial Material Exchange, was used on selected test cases in the Greater Yellow Teton Parks region to evaluate economic, environmental, and social implications of alternative fuel applications, and identifying primary and secondary industries. The test cases included looking at compressed natural gas applications in Teton National Park and Jackson, Wyoming, and studying ethanol use in Yellowstone National Park and gateway cities in Montana. With further development, the system could be used to assist decision-makers (local government, planners, vehicle purchasers, and fuel suppliers) in selecting alternative fuels, vehicles, and developing AF infrastructures. The system could become a regional AF market assessment tool that could help decision-makers understand the behavior of the AF market and conditions in which the market would grow. Based on this high level market assessment, investors and decision-makers would become more knowledgeable of the AF market opportunity before developing detailed plans and preparing financial analysis.

Development and validation of an open source quantification tool for DSC-MRI studies.

Science.gov (United States)

Gordaliza, P M; Mateos-Pérez, J M; Montesinos, P; Guzmán-de-Villoria, J A; Desco, M; Vaquero, J J

2015-03-01

This work presents the development of an open source tool for the quantification of dynamic susceptibility-weighted contrast-enhanced (DSC) perfusion studies. The development of this tool is motivated by the lack of open source tools implemented on open platforms to allow external developers to implement their own quantification methods easily and without the need of paying for a development license. This quantification tool was developed as a plugin for the ImageJ image analysis platform using the Java programming language. A modular approach was used in the implementation of the components, in such a way that the addition of new methods can be done without breaking any of the existing functionalities. For the validation process, images from seven patients with brain tumors were acquired and quantified with the presented tool and with a widely used clinical software package. The resulting perfusion parameters were then compared. Perfusion parameters and the corresponding parametric images were obtained. When no gamma-fitting is used, an excellent agreement with the tool used as a gold-standard was obtained (R(2)>0.8 and values are within 95% CI limits in Bland-Altman plots). An open source tool that performs quantification of perfusion studies using magnetic resonance imaging has been developed and validated using a clinical software package. It works as an ImageJ plugin and the source code has been published with an open source license. Copyright © 2015 Elsevier Ltd. All rights reserved.

Methods Developed by the Tools for Engine Diagnostics Task to Monitor and Predict Rotor Damage in Real Time

Science.gov (United States)

Baaklini, George Y.; Smith, Kevin; Raulerson, David; Gyekenyesi, Andrew L.; Sawicki, Jerzy T.; Brasche, Lisa

2003-01-01

Tools for Engine Diagnostics is a major task in the Propulsion System Health Management area of the Single Aircraft Accident Prevention project under NASA s Aviation Safety Program. The major goal of the Aviation Safety Program is to reduce fatal aircraft accidents by 80 percent within 10 years and by 90 percent within 25 years. The goal of the Propulsion System Health Management area is to eliminate propulsion system malfunctions as a primary or contributing factor to the cause of aircraft accidents. The purpose of Tools for Engine Diagnostics, a 2-yr-old task, is to establish and improve tools for engine diagnostics and prognostics that measure the deformation and damage of rotating engine components at the ground level and that perform intermittent or continuous monitoring on the engine wing. In this work, nondestructive-evaluation- (NDE-) based technology is combined with model-dependent disk spin experimental simulation systems, like finite element modeling (FEM) and modal norms, to monitor and predict rotor damage in real time. Fracture mechanics time-dependent fatigue crack growth and damage-mechanics-based life estimation are being developed, and their potential use investigated. In addition, wireless eddy current and advanced acoustics are being developed for on-wing and just-in-time NDE engine inspection to provide deeper access and higher sensitivity to extend on-wing capabilities and improve inspection readiness. In the long run, these methods could establish a base for prognostic sensing while an engine is running, without any overt actions, like inspections. This damage-detection strategy includes experimentally acquired vibration-, eddy-current- and capacitance-based displacement measurements and analytically computed FEM-, modal norms-, and conventional rotordynamics-based models of well-defined damages and critical mass imbalances in rotating disks and rotors.

Cryogenic Propellant Feed System Analytical Tool Development

Science.gov (United States)

Lusby, Brian S.; Miranda, Bruno M.; Collins, Jacob A.

2011-01-01

The Propulsion Systems Branch at NASA s Lyndon B. Johnson Space Center (JSC) has developed a parametric analytical tool to address the need to rapidly predict heat leak into propellant distribution lines based on insulation type, installation technique, line supports, penetrations, and instrumentation. The Propellant Feed System Analytical Tool (PFSAT) will also determine the optimum orifice diameter for an optional thermodynamic vent system (TVS) to counteract heat leak into the feed line and ensure temperature constraints at the end of the feed line are met. PFSAT was developed primarily using Fortran 90 code because of its number crunching power and the capability to directly access real fluid property subroutines in the Reference Fluid Thermodynamic and Transport Properties (REFPROP) Database developed by NIST. A Microsoft Excel front end user interface was implemented to provide convenient portability of PFSAT among a wide variety of potential users and its ability to utilize a user-friendly graphical user interface (GUI) developed in Visual Basic for Applications (VBA). The focus of PFSAT is on-orbit reaction control systems and orbital maneuvering systems, but it may be used to predict heat leak into ground-based transfer lines as well. PFSAT is expected to be used for rapid initial design of cryogenic propellant distribution lines and thermodynamic vent systems. Once validated, PFSAT will support concept trades for a variety of cryogenic fluid transfer systems on spacecraft, including planetary landers, transfer vehicles, and propellant depots, as well as surface-based transfer systems. The details of the development of PFSAT, its user interface, and the program structure will be presented.

Robotic edge machining using elastic abrasive tool

Science.gov (United States)

Sidorova, A. V.; Semyonov, E. N.; Belomestnykh, A. S.

2018-03-01

The article describes a robotic center designed for automation of finishing operations, and analyzes technological aspects of an elastic abrasive tool applied for edge machining. Based on the experimental studies, practical recommendations on the application of the robotic center for finishing operations were developed.

Interactive test tool for interoperable C-ITS development

NARCIS (Netherlands)

Voronov, A.; Englund, C.; Bengtsson, H.H.; Chen, L.; Ploeg, J.; Jongh, J.F.C.M. de; Sluis, H.J.D. van de

2015-01-01

This paper presents the architecture of an Interactive Test Tool (ITT) for interoperability testing of Cooperative Intelligent Transport Systems (C-ITS). Cooperative systems are developed by different manufacturers at different locations, which makes interoperability testing a tedious task. Up until

Development of modeling tools for pin-by-pin precise reactor simulation

International Nuclear Information System (INIS)

Ma Yan; Li Shu; Li Gang; Zhang Baoyin; Deng Li; Fu Yuanguang

2013-01-01

In order to develop large-scale transport simulation and calculation method (such as simulation of whole reactor core pin-by-pin problem), the Institute of Applied Physics and Computational Mathematics developed the neutron-photon coupled transport code JMCT and the toolkit JCOGIN. Creating physical calculation model easily and efficiently can essentially reduce problem solving time. Currently, lots of visual modeling programs have been developed based on different CAD systems. In this article, the developing idea of a visual modeling tool based on field oriented development was introduced. Considering the feature of physical modeling, fast and convenient operation modules were developed. In order to solve the storage and conversion problems of large scale models, the data structure and conversional algorithm based on the hierarchical geometry tree were designed. The automatic conversion and generation of physical model input file for JMCT were realized. By using this modeling tool, the Dayawan reactor whole core physical model was created, and the transformed file was delivered to JMCT for transport calculation. The results validate the correctness of the visual modeling tool. (authors)

Outsourcing of experimental work

DEFF Research Database (Denmark)

Nielsen, Henrik

2011-01-01

With the development of new technologies for simultaneous analysis of many genes, transcripts, or proteins (the "omics" revolution), it has become common to outsource parts of the experimental work. In order to maintain the integrity of the research projects, it is important that the interphase...... between the researcher and the service is further developed. This involves robust protocols for sample preparation, an informed choice of analytical tool, development of standards for individual technologies, and transparent data analysis. This chapter introduces some of the problems related to analysis...

Analysis of the AMMON experimental program in the EOLE facility supporting the qualification of the JHR neutron and photon tools

International Nuclear Information System (INIS)

Vaglio-Gaudard, C.; Colombier, A.C.; Hudelot, J.P.; Leray, O.; Lemaire, M.; Di-Salvo, J.; Gruel, A.; Sireta, P.

2013-06-01

The first divergence of the international Jules Horowitz Material Testing Reactor under construction at CEA Cadarache is foreseen in 2016. In order to perform all the design and safety studies, a specific neutron and photon calculation tool, HORUS3D/N and P, dedicated to the JHR simulation, was developed. This development follows the V and V-UQ process; in this frame, the validation and qualification steps aim at quantifying all the biases and associated uncertainties of HORUS3D/N and P calculations. These biases originate from both the nuclear data and the calculation scheme, for calculations at step zero (JHR BOL core) or during depletion (JHR core at equilibrium). This paper focusses on the quantification of the biases due to nuclear data and the associated uncertainties. A new experimental program, named AMMON, was performed between 2010 and 2013 to provide experimental data for this quantification. A large part of the measurements has been today analyzed with the Monte Carlo TRIPOLI-4 R code and the JEFF3.1.1 and EPDL97 data libraries relative to neutron/photon transport and photon emission. The C/E results were transposed from AMMON to JHR. The synthesis of the present analysis is very satisfactory. The calculation biases remains limited. In addition, thanks to a very good control to the experimental uncertainties during measurements, it is shown that the a priori uncertainties due to nuclear data for parameters at step zero was reduced up to a factor of 2. (authors)

Development and application of incrementally complex tools for wind turbine aerodynamics

Science.gov (United States)

Gundling, Christopher H.

Advances and availability of computational resources have made wind farm design using simulation tools a reality. Wind farms are battling two issues, affecting the cost of energy, that will make or break many future investments in wind energy. The most significant issue is the power reduction of downstream turbines operating in the wake of upstream turbines. The loss of energy from wind turbine wakes is difficult to predict and the underestimation of energy losses due to wakes has been a common problem throughout the industry. The second issue is a shorter lifetime of blades and past failures of gearboxes due to increased fluctuations in the unsteady loading of waked turbines. The overall goal of this research is to address these problems by developing a platform for a multi-fidelity wind turbine aerodynamic performance and wake prediction tool. Full-scale experiments in the field have dramatically helped researchers understand the unique issues inside a large wind farm, but experimental methods can only be used to a limited extent due to the cost of such field studies and the size of wind farms. The uncertainty of the inflow is another inherent drawback of field experiments. Therefore, computational fluid dynamics (CFD) predictions, strategically validated using carefully performed wind farm field campaigns, are becoming a more standard design practice. The developed CFD models include a blade element model (BEM) code with a free-vortex wake, an actuator disk or line based method with large eddy simulations (LES) and a fully resolved rotor based method with detached eddy simulations (DES) and adaptive mesh refinement (AMR). To create more realistic simulations, performance of a one-way coupling between different mesoscale atmospheric boundary layer (ABL) models and the three microscale CFD solvers is tested. These methods are validated using data from incrementally complex test cases that include the NREL Phase VI wind tunnel test, the Sexbierum wind farm and the

Development and application of the practice tool to deal with severe accident

International Nuclear Information System (INIS)

Kawasaki, Ikuo; Yoshida, Yoshitaka; Iwasaki, Yoshito

2014-01-01

We developed the practice tool to simulate communications between operators at a nuclear power station and persons at the headquarters at the time of severe accident (SA). The tool was developed from considering the lessons learned in dealing with the accident at the Tokyo Electric Power Company Fukushima Daiichi Nuclear Power Station, especially related to making appropriate responses to events. The tool allows users at headquarters to learn about the constitution of a specific plant and to make a reply and state a judgment based on knowledge about SA. The situations used for the practice tool were made using SPDS data from past disaster prevention drills. In a test, SA education of headquarters workers was carried out using this practice tool, and we confirmed that users were able to make the right phenomenon judgment and communicate it effectively based on the knowledge given by this practice tool. (author)

[Animal experimentation, computer simulation and surgical research].

Science.gov (United States)

Carpentier, Alain

2009-11-01

We live in a digital world In medicine, computers are providing new tools for data collection, imaging, and treatment. During research and development of complex technologies and devices such as artificial hearts, computer simulation can provide more reliable information than experimentation on large animals. In these specific settings, animal experimentation should serve more to validate computer models of complex devices than to demonstrate their reliability.

Developing experimental protocols for chronic irradiation studies: the application of a good practice guide framework

International Nuclear Information System (INIS)

Wood, M.D.; Knowles, J.D.; Whittaker, J.H.; Copplestone, D.; Malcolm, H.M.; Bielby, S.; Zinger, I.

2004-01-01

The EC-funded FASSET (Framework for Assessment of Environmental Impact) project collated information on the transfer, dosimetry, and effects of ionising radiation on wildlife. A major output from the project is the FASSET Radiation Effects Database (FRED). A review of the information contained within FRED highlighted that information on the effects of low-dose, chronic exposure was, at best, fragmentary. However, these data are required to define the dose effect relationships needed to underpin the assessment tools that are being developed. To address this requirement, a series of four Good Practice Guides (GPGs) has been produced as part of a protocol development framework. This framework aims to harmonise experimental approaches, with a view to ensuring that all necessary data on appropriate endpoints are collected, so that dose effect relationships can be determined. The GPGs cover test species selection, endpoint selection, radiation exposure and experimental design considerations. A key is used to guide researchers through the GPGs and the decisions made are recorded on an output pro-forma. The completed pro-forma forms the basis of the experimental protocol. The pro-forma also indicates the information that should be included when presenting the results of the experiment. Standardising approaches ensures that results are comparable between experiments and that they are suitable for determining dose effect relationships. This protocol development framework has been adopted by the UK Environment Agency as a document upon which future Agency-funded experimental work on the effects of chronic, low-level exposure to ionising radiation will be based. It is hoped that the framework will gain acceptance in the wider scientific community and facilitate addressing the knowledge gaps that have been identified in order that successful protection of non-human biota can be demonstrated. (author)

Tools for building virtual laboratories

International Nuclear Information System (INIS)

Agarwal, Debora; Johnston, William E.; Loken, Stewart; Tierney, Brian

1996-01-01

There is increasing interest in making unique research facilities facilities accessible on the Internet. Computer systems, scientific databases and experimental apparatus can be used by international collaborations of scientists using high-speed networks and advanced software tools to support collaboration. We are building tools including video conferencing and electronic white boards that are being used to create examples of virtual laboratories. This paper describes two pilot projects which provide testbeds for the tools. The first is a virtual laboratory project providing remote access to LBNL's Advanced Light Source. The second is the Multidimensional Applications and Gigabit internet work Consortium (MAGIC) testbed which has been established to develop a very high-speed, wide-are network to deliver realtime data at gigabit-per-second rates. (author)

Developing Phenomena Models from Experimental Data

DEFF Research Database (Denmark)

Kristensen, Niels Rode; Madsen, Henrik; Jørgensen, Sten Bay

2003-01-01

A systematic approach for developing phenomena models from experimental data is presented. The approach is based on integrated application of stochastic differential equation (SDE) modelling and multivariate nonparametric regression, and it is shown how these techniques can be used to uncover...... unknown functionality behind various phenomena in first engineering principles models using experimental data. The proposed modelling approach has significant application potential, e.g. for determining unknown reaction kinetics in both chemical and biological processes. To illustrate the performance...... of the approach, a case study is presented, which shows how an appropriate phenomena model for the growth rate of biomass in a fed-batch bioreactor can be inferred from data....

Developing Phenomena Models from Experimental Data

DEFF Research Database (Denmark)

A systematic approach for developing phenomena models from experimental data is presented. The approach is based on integrated application of stochastic differential equation (SDE) modelling and multivariate nonparametric regression, and it is shown how these techniques can be used to uncover...... unknown functionality behind various phenomena in first engineering principles models using experimental data. The proposed modelling approach has significant application potential, e.g. for determining unknown reaction kinetics in both chemical and biological processes. To illustrate the performance...... of the approach, a case study is presented, which shows how an appropriate phenomena model for the growth rate of biomass in a fed-batch bioreactor can be inferred from data....

Development of a high-temperature diagnostics-while-drilling tool.

Energy Technology Data Exchange (ETDEWEB)

Chavira, David J.; Huey, David (Stress Engineering Services, Inc.); Hetmaniak, Chris (Stress Engineering Services, Inc.); Polsky, Yarom; King, Dennis K.; Jacobson, Ronald David; Blankenship, Douglas Alan; Knudsen, Steven Dell; Henfling, Joseph Anthony; Mansure, Arthur James

2009-01-01

The envisioned benefits of Diagnostics-While-Drilling (DWD) are based on the principle that high-speed, real-time information from the downhole environment will promote better control of the drilling process. Although in practice a DWD system could provide information related to any aspect of exploration and production of subsurface resources, the current DWD system provides data on drilling dynamics. This particular set of new tools provided by DWD will allow quicker detection of problems, reduce drilling flat-time and facilitate more efficient drilling (drilling optimization) with the overarching result of decreased drilling costs. In addition to providing the driller with an improved, real-time picture of the drilling conditions downhole, data generated from DWD systems provides researchers with valuable, high fidelity data sets necessary for developing and validating enhanced understanding of the drilling process. Toward this end, the availability of DWD creates a synergy with other Sandia Geothermal programs, such as the hard-rock bit program, where the introduction of alternative rock-reduction technologies are contingent on the reduction or elimination of damaging dynamic effects. More detailed descriptions of the rationale for the program and early development efforts are described in more detail by others [SAND2003-2069 and SAND2000-0239]. A first-generation low-temperature (LT) DWD system was fielded in a series of proof-of-concept tests (POC) to validate functionality. Using the LT system, DWD was subsequently used to support a single-laboratory/multiple-partner CRADA (Cooperative Research and Development Agreement) entitled Advanced Drag Bits for Hard-Rock Drilling. The drag-bit CRADA was established between Sandia and four bit companies, and involved testing of a PDC bit from each company [Wise, et al., 2003, 2004] in the same lithologic interval at the Gas Technology Institute (GTI) test facility near Catoosa, OK. In addition, the LT DWD system has

Development of IFC based fire safety assesment tools

DEFF Research Database (Denmark)

Taciuc, Anca; Karlshøj, Jan; Dederichs, Anne

2016-01-01

Due to the impact that the fire safety design has on the building's layout and on other complementary systems, as installations, it is important during the conceptual design stage to evaluate continuously the safety level in the building. In case that the task is carried out too late, additional...... changes need to be implemented, involving supplementary work and costs with negative impact on the client. The aim of this project is to create a set of automatic compliance checking rules for prescriptive design and to develop a web application tool for performance based design that retrieves data from...... Building Information Models (BIM) to evacuate the safety level in the building during the conceptual design stage. The findings show that the developed tools can be useful in AEC industry. Integrating BIM from conceptual design stage for analyzing the fire safety level can ensure precision in further...

Judging the Neonatal Abstinence Syndrome Assessment Tools to Guide Future Tool Development: The use of Clinimetrics as Opposed to Psychometrics.

Science.gov (United States)

Westgate, Philip M; Gomez-Pomar, Enrique

2017-01-01

In the face of the current Neonatal Abstinence Syndrome (NAS) epidemic, there is considerable variability in the assessment and management of infants with NAS. In this manuscript, we particularly focus on NAS assessment, with special attention given to the popular Finnegan Neonatal Abstinence Score (FNAS). A major instigator of the problem of variable practices is that multiple modified versions of the FNAS exist and continue to be proposed, including shortened versions. Furthermore, the validity of such assessment tools has been questioned, and as a result, the need for better tools has been suggested. The ultimate purpose of this manuscript, therefore, is to increase researchers' and clinicians' understanding on how to judge the usefulness of NAS assessment tools in order to guide future tool development and to reduce variable practices. In short, we suggest that judgment of NAS assessment tools should be made on a clinimetrics viewpoint as opposed to psychometrically. We provide examples, address multiple issues that must be considered, and discuss future tool development. Furthermore, we urge researchers and clinicians to come together, utilizing their knowledge and experience, to assess the utility and practicality of existing assessment tools and to determine if one or more new or modified tools are needed with the goal of increased agreement on the assessment of NAS in practice.

Experimental activities in the early years of elementary school: a methodological tool for construction of the teaching-learning process

Directory of Open Access Journals (Sweden)

Ana de Souza Lima

2017-07-01

Full Text Available Focusing on the early years of elementary school, this study evaluated the impact of experimental activities based in the scientific method and preconceptions on the learning and memorization of concepts and phenomena associated with the fermentation process. The different activities were carried out through an experimental course (20hs, with students of elementary school from school municipal Diacono Joao Luiz Pozzobon, Santa Maria-RS. The research involved 20 students, with 6 and 7 old years. The evaluation was performed by comparing the interview responses made before the course (pre-test and after the course (post-test. The post-tests were applied at the end of the experimental course, and after 6 and 12 months. The experimental activities facilitated the acquisition and retention of new concepts. The data show that "experimental activities" can be used by teachers in early grades as a methodological tool to complement the teaching-learning process.

Software project management tools in global software development: a systematic mapping study.

Science.gov (United States)

Chadli, Saad Yasser; Idri, Ali; Ros, Joaquín Nicolás; Fernández-Alemán, José Luis; de Gea, Juan M Carrillo; Toval, Ambrosio

2016-01-01

Global software development (GSD) which is a growing trend in the software industry is characterized by a highly distributed environment. Performing software project management (SPM) in such conditions implies the need to overcome new limitations resulting from cultural, temporal and geographic separation. The aim of this research is to discover and classify the various tools mentioned in literature that provide GSD project managers with support and to identify in what way they support group interaction. A systematic mapping study has been performed by means of automatic searches in five sources. We have then synthesized the data extracted and presented the results of this study. A total of 102 tools were identified as being used in SPM activities in GSD. We have classified these tools, according to the software life cycle process on which they focus and how they support the 3C collaboration model (communication, coordination and cooperation). The majority of the tools found are standalone tools (77%). A small number of platforms (8%) also offer a set of interacting tools that cover the software development lifecycle. Results also indicate that SPM areas in GSD are not adequately supported by corresponding tools and deserve more attention from tool builders.

Data Mining Tools for Malware Detection

CERN Document Server

Masud, Mehedy; Thuraisingham, Bhavani; Andreasson, Kim J

2011-01-01

Although the use of data mining for security and malware detection is quickly on the rise, most books on the subject provide high-level theoretical discussions to the near exclusion of the practical aspects. Breaking the mold, Data Mining Tools for Malware Detection provides a step-by-step breakdown of how to develop data mining tools for malware detection. Integrating theory with practical techniques and experimental results, it focuses on malware detection applications for email worms, malicious code, remote exploits, and botnets. The authors describe the systems they have designed and devel

Developing electronic cooperation tools: a case from norwegian health care.

Science.gov (United States)

Larsen, Eli; Mydske, Per Kristen

2013-06-19

Many countries aim to create electronic cooperational tools in health care, but the progress is rather slow. The study aimed to uncover how the authoritys' financing policies influence the development of electronic cooperational tools within public health care. An interpretative approach was used in this study. We performed 30 semistructured interviews with vendors, policy makers, and public authorities. Additionally, we conducted an extensive documentation study and participated in 18 workshops concerning information and communication technology (ICT) in Norwegian health care. We found that the interorganizational communication in sectors like health care, that have undergone an independent development of their internal information infrastructure would find it difficult to create electronic services that interconnect the organizations because such connections would affect all interconnected organizations within the heterogenic structure. The organizations would, to a large extent, depend on new functionality in existing information systems. Electronic patient records play a central role in all parts of the health care sector and therefore dependence is established to the information systems and theirs vendors. The Norwegian government authorities, which run more than 80% of the Norwegian health care, have not taken extraordinary steps to compensate for this dependency-the government's political philosophy is that each health care institution should pay for further electronic patient record development. However, cooperational tools are complex due to the number of players involved and the way they are intertwined with the overall workflow. The customers are not able to buy new functionalities on the drawing table, while the electronic patient record vendors are not willing to take the economic risk in developing cooperational tools. Thus, the market mechanisms in the domain are challenged. We also found that public projects that were only financed for the first

COSTMODL - AN AUTOMATED SOFTWARE DEVELOPMENT COST ESTIMATION TOOL

Science.gov (United States)

Roush, G. B.

1994-01-01

The cost of developing computer software consumes an increasing portion of many organizations' budgets. As this trend continues, the capability to estimate the effort and schedule required to develop a candidate software product becomes increasingly important. COSTMODL is an automated software development estimation tool which fulfills this need. Assimilating COSTMODL to any organization's particular environment can yield significant reduction in the risk of cost overruns and failed projects. This user-customization capability is unmatched by any other available estimation tool. COSTMODL accepts a description of a software product to be developed and computes estimates of the effort required to produce it, the calendar schedule required, and the distribution of effort and staffing as a function of the defined set of development life-cycle phases. This is accomplished by the five cost estimation algorithms incorporated into COSTMODL: the NASA-developed KISS model; the Basic, Intermediate, and Ada COCOMO models; and the Incremental Development model. This choice affords the user the ability to handle project complexities ranging from small, relatively simple projects to very large projects. Unique to COSTMODL is the ability to redefine the life-cycle phases of development and the capability to display a graphic representation of the optimum organizational structure required to develop the subject project, along with required staffing levels and skills. The program is menu-driven and mouse sensitive with an extensive context-sensitive help system that makes it possible for a new user to easily install and operate the program and to learn the fundamentals of cost estimation without having prior training or separate documentation. The implementation of these functions, along with the customization feature, into one program makes COSTMODL unique within the industry. COSTMODL was written for IBM PC compatibles, and it requires Turbo Pascal 5.0 or later and Turbo

New observations on gametogenic development and reproductive experimental tools to support seed yield improvement in cowpea [Vigna unguiculata (L.) Walp].

Science.gov (United States)

Salinas-Gamboa, Rigel; Johnson, Susan D; Sánchez-León, Nidia; Koltunow, Anna M G; Vielle-Calzada, Jean-Philippe

2016-06-01

Cowpea reproductive tools. Vigna unguiculata L. Walp. (cowpea) is recognized as a major legume food crop in Africa, but seed yields remain low in most varieties adapted to local conditions. The development of hybrid cowpea seed that could be saved after each generation, enabling significant yield increases, will require manipulation of reproductive development from a sexual to an asexual mode. To develop new technologies that could support the biotechnological manipulation of reproductive development in cowpea, we examined gametogenesis and seed formation in two transformable, African-adapted, day-length-insensitive varieties. Here, we show that these two varieties exhibit distinct morphological and phenological traits but share a common developmental sequence in terms of ovule formation and gametogenesis. We present a reproductive calendar that allows prediction of male and female gametogenesis on the basis of sporophytic parameters related to floral bud size and reproductive organ development, determining that gametogenesis occurs more rapidly in the anther than in the ovule. We also show that the mode of megagametogenesis is of the Polygonum-type and not Oenothera-type, as previously reported. Finally, we developed a whole-mount immunolocalization protocol and applied it to detect meiotic proteins in the cowpea megaspore mother cell, opening opportunities for comparing the dynamics of protein localization during male and female meiosis, as well as other reproductive events in this emerging legume model system.

In-house developed methodologies and tools for decommissioning projects

International Nuclear Information System (INIS)

Detilleux, Michel; Centner, Baudouin

2007-01-01

The paper describes different methodologies and tools developed in-house by Tractebel Engineering to facilitate the engineering works to be carried out especially in the frame of decommissioning projects. Three examples of tools with their corresponding results are presented: - The LLWAA-DECOM code, a software developed for the radiological characterization of contaminated systems and equipment. The code constitutes a specific module of more general software that was originally developed to characterize radioactive waste streams in order to be able to declare the radiological inventory of critical nuclides, in particular difficult-to-measure radionuclides, to the Authorities. In the case of LLWAA-DECOM, deposited activities inside contaminated equipment (piping, tanks, heat exchangers...) and scaling factors between nuclides, at any given time of the decommissioning time schedule, are calculated on the basis of physical characteristics of the systems and of operational parameters of the nuclear power plant. This methodology was applied to assess decommissioning costs of Belgian NPPs, to characterize the primary system of Trino NPP in Italy, to characterize the equipment of miscellaneous circuits of Ignalina NPP and of Kozloduy unit 1 and, to calculate remaining dose rates around equipment in the frame of the preparation of decommissioning activities; - The VISIMODELLER tool, a user friendly CAD interface developed to ease the introduction of lay-out areas in a software named VISIPLAN. VISIPLAN is a 3D dose rate assessment tool for ALARA work planning, developed by the Belgian Nuclear Research Centre SCK.CEN. Both softwares were used for projects such as the steam generators replacements in Belgian NPPs or the preparation of the decommissioning of units 1 and 2 of Kozloduy NPP; - The DBS software, a software developed to manage the different kinds of activities that are part of the general time schedule of a decommissioning project. For each activity, when relevant

Automated software development tools in the MIS (Management Information Systems) environment

Energy Technology Data Exchange (ETDEWEB)

Arrowood, L.F.; Emrich, M.L.

1987-09-11

Quantitative and qualitative benefits can be obtained through the use of automated software development tools. Such tools are best utilized when they complement existing procedures and standards. They can assist systems analysts and programmers with project specification, design, implementation, testing, and documentation. Commercial products have been evaluated to determine their efficacy. User comments have been included to illustrate actual benefits derived from introducing these tools into MIS organizations.

Study of development and experimental proof for an educational tool on iPad using scientific TV programs

OpenAIRE

藤田, 貢崇

2015-01-01

研究成果の概要（和文）：本研究の目的は、児童・生徒が授業内あるいは授業外でも、発展的な知識を系統的に得られるツールを開発し、より理科に関心を深める環境を提供することである。これらの教材は、多様な動画（実際に放映された科学番組、経験をもつ研究者によって制作した動画作品等）を活用することが効果的である。本研究により、教育のためのコンテンツ制作のスキル、制作後のコンテンツの調整など必要なスキルを習得し、教育のための動画のシナリオ作成などを、効率的に行う手法を開発できた。また、これらのツールの活用場面は学校教育のみにとどまらず、博物館や地域の科学館・資料館でも効果的に活用できることがわかった。研究成果の概要（英文）：The aim of this study is to provide the environment of better understanding science inside and outside school using advanced ICT tools. Our developed ICT tools and contents are worked on iP...

Improving e-book access via a library-developed full-text search tool.

Science.gov (United States)

Foust, Jill E; Bergen, Phillip; Maxeiner, Gretchen L; Pawlowski, Peter N

2007-01-01

This paper reports on the development of a tool for searching the contents of licensed full-text electronic book (e-book) collections. The Health Sciences Library System (HSLS) provides services to the University of Pittsburgh's medical programs and large academic health system. The HSLS has developed an innovative tool for federated searching of its e-book collections. Built using the XML-based Vivísimo development environment, the tool enables a user to perform a full-text search of over 2,500 titles from the library's seven most highly used e-book collections. From a single "Google-style" query, results are returned as an integrated set of links pointing directly to relevant sections of the full text. Results are also grouped into categories that enable more precise retrieval without reformulation of the search. A heuristic evaluation demonstrated the usability of the tool and a web server log analysis indicated an acceptable level of usage. Based on its success, there are plans to increase the number of online book collections searched. This library's first foray into federated searching has produced an effective tool for searching across large collections of full-text e-books and has provided a good foundation for the development of other library-based federated searching products.

Tools and approaches for simplifying serious games development in educational settings

OpenAIRE

Calvo, Antonio; Rotaru, Dan C.; Freire, Manuel; Fernandez-Manjon, Baltasar

2016-01-01

Serious Games can benefit from the commercial video games industry by taking advantage of current development tools. However, the economics and requirements of serious games and commercial games are very different. In this paper, we describe the factors that impact the total cost of ownership of serious games used in educational settings, review the specific requirements of games used as learning material, and analyze the different development tools available in the industry highlighting thei...

The development of human factors experimental evaluation techniques -The development of human factors technologies-

International Nuclear Information System (INIS)

Sim, Bong Shick; Oh, In Seok; Cha, Kyeong Ho; Lee, Hyun Chul

1994-04-01

In the 2nd year of the research project for the development of human factors evaluation techniques, we first defined the experimental target systems by the comparison study of the advanced control rooms proposed by foreign countries in order to make the experiment feasible and realistic for the 10 experimental items selected in the first year of the project. Then we have decided to confine our research on the big board overview panel and operator workstations. Following the development of selection criteria for our research interest, we have identified the design variables which may influence the performance of the operator by the functional analysis. The experimental variables which will be used for the evaluation of the proposed items are then defined by the relational analysis between evaluation items and design variables and they are classified by the characteristics of the measurement data. The functional requirements of ITF are developed to accommodate the necessary functions for carrying out the 10 evaluation items. The functional requirements for each sub-system of ITF have been developed with the experimental paradigm of APTEA. Finally we have reviewed the compact nuclear simulator (CNS) at KAERI from the point of view of jyman factors guidelines/principles and proposed the two possible layouts for the experimental apparatus for the evaluation of display alternative and operational procedure. (Author)

Development of a clinical information tool for the electronic medical record: a case study.

Science.gov (United States)

Epstein, Barbara A; Tannery, Nancy H; Wessel, Charles B; Yarger, Frances; LaDue, John; Fiorillo, Anthony B

2010-07-01

What is the process of developing a clinical information tool to be embedded in the electronic health record of a very large and diverse academic medical center? The development took place at the University of Pittsburgh Health Sciences Library System. The clinical information tool developed is a search box with subject tabs to provide quick access to designated full-text information resources. Each subject tab offers a federated search of a different pool of resources. Search results are organized "on the fly" into meaningful categories using clustering technology and are directly accessible from the results page. After more than a year of discussion and planning, a clinical information tool was embedded in the academic medical center's electronic health record. The library successfully developed a clinical information tool, called Clinical-e, for use at the point of care. Future development will refine the tool and evaluate its impact and effectiveness.

Disability Rights, Gender, and Development: A Resource Tool for Action. Full Report

Science.gov (United States)

de Silva de Alwis, Rangita

2008-01-01

This resource tool builds a normative framework to examine the intersections of disability rights and gender in the human rights based approach to development. Through case studies, good practices and analyses the research tool makes recommendations and illustrates effective tools for the implementation of gender and disability sensitive laws,…

Development and validation of a simulation tool dedicated to eddy current non destructive testing of tubes

International Nuclear Information System (INIS)

Reboud, Ch.

2006-09-01

Eddy current testing (ECT) technique is widely used in industrial fields such as iron and steel industry. Dedicated simulation tools provide a great assistance for the optimisation of ECT processes. CEA and the Vallourec Research Center have collaborated in order to develop a simulation tool of ECT of tubes. The volume integral method has been chosen for the resolution of Maxwell equations in a stratified medium, in order to get accurate results with a computation time short enough to carry out optimisation or inversion procedures. A fast model has been developed for the simulation of ECT of non magnetic tubes using specific external probes. New flaw geometries have been modelled: holes and notches with flat bottom. Validations of the developments, which have been integrated to the CIVA platform, have been carried out using experimental data recorded in laboratory conditions and in. industrial conditions, successively. The integral equations derived are solved using the Galerkin variant of the method of moments with pulse functions as projection functions. In order to overcome some memory limitations, other projection functions have been considered. A new discretization scheme based on non-uniform B-Splines of degree 1 or 2 has been implemented, which constitutes an original contribution to the existing literature. The decrease of the mesh size needed to get a given accuracy on the result may lead to the simulation of more complex ECT configurations. (author)

Reflective Journaling: A Tool for Teacher Professional Development

Science.gov (United States)

Dreyer, Lorna M.

2015-01-01

This qualitative study explores the introduction of postgraduate education students to reflective journaling as a tool for professional development. Students were purposefully selected to keep a weekly journal in which they reflected in and on the activities (methodologies, techniques, strategies) they engaged in while executing a workplace…

EAST: Developing an Electronic Assessment and Storage Tool.

Science.gov (United States)

Edwards, Katherine I.; Fernandez, Eugenia; Milionis, Tracey M.; Williamson, David M.

2002-01-01

Describes the purpose, development, analysis, prototyping, and features of the Electronic Assessment and Storage Tool (EAST). The Web-based system aids curriculum assessment at Purdue School of Engineering and Technology at Indiana University Purdue University Indianapolis through the ability to easily store artifacts in electronic form, support…

Experimental Products Development Team (EPDT) Supporting New AWIPS . Part 2; Capabilities

Science.gov (United States)

Burks, Jason E.

2015-01-01

In 2012, the Experimental Products Development Team (EPDT) was formed within NASA's Short-term Prediction Research and Transition (SPoRT) Center to create training for development of plug-ins to extend the National Weather Service (NWS) Advanced Weather Interactive Processing System (AWIPS) version 2. The broader atmospheric science community had a need for AWIPS II development training being created at SPoRT and EPDT was expanded to include other groups who were looking for training. Since the expansion of the group occurred, EPDT has provided AWIPS II development training to over thirty participants spanning a wide variety of groups such as NWS Systems Engineering Center, NWS Meteorological Development Laboratory, and several NOAA Cooperative Institutes. Participants within EPDT solidify their learning experience through hands-on learning and by participating in a "code-sprint" in which they troubleshoot existing and develop plug-ins. The hands-on learning workshop is instructor lead with participants completing exercises within the AWIPS II Development Environment. During the code sprints EPDT groups work on projects important to the community and have worked on various plug-ins such as an RGB image recipe creation tool, and an mPing (crowd sourced precipitation type reporting system) ingest and display. EPDT has developed a well-defined training regime which prepares participants to fully develop plug-ins for the extendible AWIPS II architecture from ingest to the display of new data. SPoRT has hosted 2 learning workshops and 1 code sprint over the last two years, and continues to build and shape the EPDT group based on feedback from previous workshops. The presentation will provide an overview of EPDT current and future activities, and best practices developed within EPDT.

DEALed : A tool suite for distributed real-time systems development

NARCIS (Netherlands)

Bolshakov, K.; Karpov, Y.; Sintotski, A.; Malyshkin, V.

1999-01-01

DEALed is a tool suite for development of distributed systems using DEAL language. DEAL is being developed at Eindhoven University of Technology as a part of DEDOS project. Area of application of the DEALed is the development of the distributed real- time safety-critical control systems.

Development and application of a microarray meter tool to optimize microarray experiments

Directory of Open Access Journals (Sweden)

Rouse Richard JD

2008-07-01

Full Text Available Abstract Background Successful microarray experimentation requires a complex interplay between the slide chemistry, the printing pins, the nucleic acid probes and targets, and the hybridization milieu. Optimization of these parameters and a careful evaluation of emerging slide chemistries are a prerequisite to any large scale array fabrication effort. We have developed a 'microarray meter' tool which assesses the inherent variations associated with microarray measurement prior to embarking on large scale projects. Findings The microarray meter consists of nucleic acid targets (reference and dynamic range control and probe components. Different plate designs containing identical probe material were formulated to accommodate different robotic and pin designs. We examined the variability in probe quality and quantity (as judged by the amount of DNA printed and remaining post-hybridization using three robots equipped with capillary printing pins. Discussion The generation of microarray data with minimal variation requires consistent quality control of the (DNA microarray manufacturing and experimental processes. Spot reproducibility is a measure primarily of the variations associated with printing. The microarray meter assesses array quality by measuring the DNA content for every feature. It provides a post-hybridization analysis of array quality by scoring probe performance using three metrics, a a measure of variability in the signal intensities, b a measure of the signal dynamic range and c a measure of variability of the spot morphologies.

Integrated structural analysis tool using the linear matching method part 1 – Software development

International Nuclear Information System (INIS)

Ure, James; Chen, Haofeng; Tipping, David

2014-01-01

A number of direct methods based upon the Linear Matching Method (LMM) framework have been developed to address structural integrity issues for components subjected to cyclic thermal and mechanical load conditions. This paper presents a new integrated structural analysis tool using the LMM framework for the assessment of load carrying capacity, shakedown limit, ratchet limit and steady state cyclic response of structures. First, the development of the LMM for the evaluation of design limits in plasticity is introduced. Second, preliminary considerations for the development of the LMM into a tool which can be used on a regular basis by engineers are discussed. After the re-structuring of the LMM subroutines for multiple central processing unit (CPU) solution, the LMM software tool for the assessment of design limits in plasticity is implemented by developing an Abaqus CAE plug-in with graphical user interfaces. Further demonstration of this new LMM analysis tool including practical application and verification is presented in an accompanying paper. - Highlights: • A new structural analysis tool using the Linear Matching Method (LMM) is developed. • The software tool is able to evaluate the design limits in plasticity. • Able to assess limit load, shakedown, ratchet limit and steady state cyclic response. • Re-structuring of the LMM subroutines for multiple CPU solution is conducted. • The software tool is implemented by developing an Abaqus CAE plug-in with GUI

An experimental study of hafting adhesives and the implications for compound tool technology.

Science.gov (United States)

Zipkin, Andrew M; Wagner, Mark; McGrath, Kate; Brooks, Alison S; Lucas, Peter W

2014-01-01

Experimental studies of hafting adhesives and modifications to compound tool components can demonstrate the extent to which human ancestors understood and exploited material properties only formally defined by science within the last century. Discoveries of Stone Age hafting adhesives at archaeological sites in Europe, the Middle East, and Africa have spurred experiments that sought to replicate or create models of such adhesives. Most of these studies, however, have been actualistic in design, focusing on replicating ancient applications of adhesive technology. In contrast, this study tested several glues based on Acacia resin within a materials science framework to better understand the effect of each adhesive ingredient on compound tool durability. Using an overlap joint as a model for a compound tool, adhesives formulated with loading agents from a range of particle sizes and mineral compositions were tested for toughness on smooth and rough substrates. Our results indicated that overlap joint toughness is significantly increased by using a roughened joint surface. Contrary to some previous studies, there was no evidence that particle size diversity in a loading agent improved adhesive effectiveness. Generally, glues containing quartz or ochre loading agents in the silt and clay-sized particle class yielded the toughest overlap joints, with the effect of particle size found to be more significant for rough rather than smooth substrate joints. Additionally, no particular ochre mineral or mineral mixture was found to be a clearly superior loading agent. These two points taken together suggest that Paleolithic use of ochre-loaded adhesives and the criteria used to select ochres for this purpose may have been mediated by visual and symbolic considerations rather than purely functional concerns.

Judging the Neonatal Abstinence Syndrome Assessment Tools to Guide Future Tool Development: The use of Clinimetrics as Opposed to Psychometrics

Directory of Open Access Journals (Sweden)

Philip M. Westgate

2017-09-01

Full Text Available In the face of the current Neonatal Abstinence Syndrome (NAS epidemic, there is considerable variability in the assessment and management of infants with NAS. In this manuscript, we particularly focus on NAS assessment, with special attention given to the popular Finnegan Neonatal Abstinence Score (FNAS. A major instigator of the problem of variable practices is that multiple modified versions of the FNAS exist and continue to be proposed, including shortened versions. Furthermore, the validity of such assessment tools has been questioned, and as a result, the need for better tools has been suggested. The ultimate purpose of this manuscript, therefore, is to increase researchers’ and clinicians’ understanding on how to judge the usefulness of NAS assessment tools in order to guide future tool development and to reduce variable practices. In short, we suggest that judgment of NAS assessment tools should be made on a clinimetrics viewpoint as opposed to psychometrically. We provide examples, address multiple issues that must be considered, and discuss future tool development. Furthermore, we urge researchers and clinicians to come together, utilizing their knowledge and experience, to assess the utility and practicality of existing assessment tools and to determine if one or more new or modified tools are needed with the goal of increased agreement on the assessment of NAS in practice.

Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

Science.gov (United States)

Min, James B.

2005-01-01

The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo- Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using natural-frequency curve veerings to identify ranges of operating conditions (rotational speeds and engine orders) in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued.

New Territorial Development Tools in the Cohesion Policy 2014-2020

Directory of Open Access Journals (Sweden)

Györgyi Nyikos

2014-12-01

Full Text Available Nowadays an important question is how to use the limited resources available in the most efficient and sustainable way. The assessment of development policy interventions and the question of successful absorption of development funds shifted clearly towards stronger enforcement of the aspects efficiency and effectiveness. There is clearly a need for an integrated approach to deliver an effective and sustainable response. The question is how the new territorial development tools – established by the new cohesion policy regulation for the coming programming period - can fit in these conditions, how can they help to achieve the common goals and response to the integrated approach. Cooperation and in-depth knowledge is required for stakeholders to make use of the new tools in an integrated manner.

Work plan for development of K-Basin fuel handling tools

International Nuclear Information System (INIS)

Bridges, A.E.

1994-01-01

The purpose of this document is to provide the engineering work plan for the development of handling tools for the removal of N-Reactor fuel elements from their storage canisters in the K-Basins storage pool and insertion into the Single Fuel Element Cans for subsequent shipment to a Hot Cell for examination. Examination of these N-Reactor fuel elements is part of the overall characterization effort. New hand tools are required since previous fuel movement has involved grasping the fuel in a horizontal position. These tools are required to lift an element from the storage canister

Development and Validation of a Multidisciplinary Tool for Accurate and Efficient Rotorcraft Noise Prediction (MUTE)

Science.gov (United States)

Liu, Yi; Anusonti-Inthra, Phuriwat; Diskin, Boris

2011-01-01

A physics-based, systematically coupled, multidisciplinary prediction tool (MUTE) for rotorcraft noise was developed and validated with a wide range of flight configurations and conditions. MUTE is an aggregation of multidisciplinary computational tools that accurately and efficiently model the physics of the source of rotorcraft noise, and predict the noise at far-field observer locations. It uses systematic coupling approaches among multiple disciplines including Computational Fluid Dynamics (CFD), Computational Structural Dynamics (CSD), and high fidelity acoustics. Within MUTE, advanced high-order CFD tools are used around the rotor blade to predict the transonic flow (shock wave) effects, which generate the high-speed impulsive noise. Predictions of the blade-vortex interaction noise in low speed flight are also improved by using the Particle Vortex Transport Method (PVTM), which preserves the wake flow details required for blade/wake and fuselage/wake interactions. The accuracy of the source noise prediction is further improved by utilizing a coupling approach between CFD and CSD, so that the effects of key structural dynamics, elastic blade deformations, and trim solutions are correctly represented in the analysis. The blade loading information and/or the flow field parameters around the rotor blade predicted by the CFD/CSD coupling approach are used to predict the acoustic signatures at far-field observer locations with a high-fidelity noise propagation code (WOPWOP3). The predicted results from the MUTE tool for rotor blade aerodynamic loading and far-field acoustic signatures are compared and validated with a variation of experimental data sets, such as UH60-A data, DNW test data and HART II test data.

Economy diversification: a potent tool for tourism development in ...

African Journals Online (AJOL)

Economy diversification: a potent tool for tourism development in Nigeria. ... AFRREV STECH: An International Journal of Science and Technology ... The diversity of cultural attractions, the friendly disposition of the people, revamped National ...

Conceptual air sparging decision tool in support of the development of an air sparging optimization decision tool

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

The enclosed document describes a conceptual decision tool (hereinafter, Tool) for determining applicability of and for optimizing air sparging systems. The Tool was developed by a multi-disciplinary team of internationally recognized experts in air sparging technology, lead by a group of project and task managers at Parsons Engineering Science, Inc. (Parsons ES). The team included Mr. Douglas Downey and Dr. Robert Hinchee of Parsons ES, Dr. Paul Johnson of Arizona State University, Dr. Richard Johnson of Oregon Graduate Institute, and Mr. Michael Marley of Envirogen, Inc. User Community Panel Review was coordinated by Dr. Robert Siegrist of Colorado School of Mines (also of Oak Ridge National Laboratory) and Dr. Thomas Brouns of Battelle/Pacific Northwest Laboratory. The Tool is intended to provide guidance to field practitioners and environmental managers for evaluating the applicability and optimization of air sparging as remedial action technique.

Improving e-book access via a library-developed full-text search tool*

Science.gov (United States)

Foust, Jill E.; Bergen, Phillip; Maxeiner, Gretchen L.; Pawlowski, Peter N.

2007-01-01

Purpose: This paper reports on the development of a tool for searching the contents of licensed full-text electronic book (e-book) collections. Setting: The Health Sciences Library System (HSLS) provides services to the University of Pittsburgh's medical programs and large academic health system. Brief Description: The HSLS has developed an innovative tool for federated searching of its e-book collections. Built using the XML-based Vivísimo development environment, the tool enables a user to perform a full-text search of over 2,500 titles from the library's seven most highly used e-book collections. From a single “Google-style” query, results are returned as an integrated set of links pointing directly to relevant sections of the full text. Results are also grouped into categories that enable more precise retrieval without reformulation of the search. Results/Evaluation: A heuristic evaluation demonstrated the usability of the tool and a web server log analysis indicated an acceptable level of usage. Based on its success, there are plans to increase the number of online book collections searched. Conclusion: This library's first foray into federated searching has produced an effective tool for searching across large collections of full-text e-books and has provided a good foundation for the development of other library-based federated searching products. PMID:17252065

Concept-Mapping Tools and the Development of Students' Critical-Thinking Skills

Science.gov (United States)

Tseng, Sheng-Shiang

2015-01-01

Developing students' critical-thinking skills has recently received attention at all levels of education. This article proposes the use of concept-mapping tools to improve students' critical-thinking skills. The article introduces a Web-based concept-mapping tool--Popplet--and demonstrates its application for teaching critical-thinking skills in…

Machine tool structures

CERN Document Server

Koenigsberger, F

1970-01-01

Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration c

Influence of minimum quantity of lubricant (MQL on tool life of carbide cutting tools during milling process of steel AISI 1018

Directory of Open Access Journals (Sweden)

Diego Núñez

2017-03-01

Full Text Available Nowadays, high productivity of machining is an important issue to obtain economic benefits in the industry. This purpose could be reached with high cutting velocity and feed rate. However, the inherently behavior produce high temperatures in the interface of couple cutting tool/workpiece. Many cutting fluids have been developed to control temperature in process and increase tool life. The objective of this paper is to compare the carbide milling tool wear using different systems cutting fluids: flood and minimum quantity of lubrication (MQL. The values of carbide milling cutting tool wear was evaluate according with the standard ISO 8688-1 1989. The experimental results showed that using MQL reduces significantly (about 40% tool wear in milling AISI 1018 steel at industrial cutting conditions.

Development of an experimental apparatus for nucleate boiling analysis

International Nuclear Information System (INIS)

Castro, A.J.A. de.

1984-01-01

An experimental apparatus is developed for the study of the parameters that affect nucleate boiling. The experimental set up is tested for nucleate boiling in an annular test section with subcooled water flow. The following parameters are analysed: pressure, fluid velocity and the fluid temperature at the test section entrance. The performance of the experimental apparatus is analysed by the results and by the problems raised by the operation of the setup. (Author) [pt

Development of the NSRR experimental data bank system, (1)

International Nuclear Information System (INIS)

Ishijima, Kiyomi; Uemura, Mutsumi; Ohnishi, Nobuaki

1981-01-01

To promote collection, arrangement, and utilization of the NSRR experimental data, development of the NSRR experimental data bank system was intended. Fundamental parts of the NSRR experimental data bank system, including the processing program DTBNK, have been completed. Data of the experiments performed so far have been collected and stored. Outline of the processing program and the method of utilization and the present status of the data bank system are discussed. (author)

Method Engineering: Engineering of Information Systems Development Methods and Tools

OpenAIRE

Brinkkemper, J.N.; Brinkkemper, Sjaak

1996-01-01

This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e. the configuration of a project approach that is tuned to the project at hand. A language and support tool for the engineering of situational methods are discussed.

Fast scattering simulation tool for multi-energy x-ray imaging

Energy Technology Data Exchange (ETDEWEB)

Sossin, A., E-mail: artur.sossin@cea.fr [CEA-LETI MINATEC Grenoble, F-38054 Grenoble (France); Tabary, J.; Rebuffel, V. [CEA-LETI MINATEC Grenoble, F-38054 Grenoble (France); Létang, J.M.; Freud, N. [Université de Lyon, CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon, Université Claude Bernard Lyon 1, Centre Léon Bérard (France); Verger, L. [CEA-LETI MINATEC Grenoble, F-38054 Grenoble (France)

2015-12-01

A combination of Monte Carlo (MC) and deterministic approaches was employed as a means of creating a simulation tool capable of providing energy resolved x-ray primary and scatter images within a reasonable time interval. Libraries of Sindbad, a previously developed x-ray simulation software, were used in the development. The scatter simulation capabilities of the tool were validated through simulation with the aid of GATE and through experimentation by using a spectrometric CdTe detector. A simple cylindrical phantom with cavities and an aluminum insert was used. Cross-validation with GATE showed good agreement with a global spatial error of 1.5% and a maximum scatter spectrum error of around 6%. Experimental validation also supported the accuracy of the simulations obtained from the developed software with a global spatial error of 1.8% and a maximum error of around 8.5% in the scatter spectra.

Towards a Reference Architecture to Provision Tools as a Service for Global Software Development

DEFF Research Database (Denmark)

Chauhan, Aufeef; Babar, Muhammad Ali

2014-01-01

Organizations involve in Global Software Development (GSD) face challenges in terms of having access to appropriate set of tools for performing distributed engineering and development activities, integration between heterogeneous desktop and web-based tools, management of artifacts developed...... distributed environment. In this paper, we argue the need to have a cloud-enabled platform for supporting GSD and propose reference architecture of a cloud based Platform for providing support to provision ecosystem of the Tools as a Service (PTaaS)....

Development and Validation of a Standardized Tool for Prioritization of Information Sources.

Science.gov (United States)

Akwar, Holy; Kloeze, Harold; Mukhi, Shamir

2016-01-01

To validate the utility and effectiveness of a standardized tool for prioritization of information sources for early detection of diseases. The tool was developed with input from diverse public health experts garnered through survey. Ten raters used the tool to evaluate ten information sources and reliability among raters was computed. The Proc mixed procedure with random effect statement and SAS Macros were used to compute multiple raters' Fleiss Kappa agreement and Kendall's Coefficient of Concordance. Ten disparate information sources evaluated obtained the following composite scores: ProMed 91%; WAHID 90%; Eurosurv 87%; MediSys 85%; SciDaily 84%; EurekAl 83%; CSHB 78%; GermTrax 75%; Google 74%; and CBC 70%. A Fleiss Kappa agreement of 50.7% was obtained for ten information sources and 72.5% for a sub-set of five sources rated, which is substantial agreement validating the utility and effectiveness of the tool. This study validated the utility and effectiveness of a standardized criteria tool developed to prioritize information sources. The new tool was used to identify five information sources suited for use by the KIWI system in the CEZD-IIR project to improve surveillance of infectious diseases. The tool can be generalized to situations when prioritization of numerous information sources is necessary.

Design tool for the thermal energy potential of asphalt pavements

NARCIS (Netherlands)

Loomans, M.G.L.C.; Oversloot, H.P.; Bondt, A. de; Jansen, R.; Rij, H. van

2003-01-01

This paper describes the development of a design tool for the calculation of the thermal energy potential of a so-called asphalt collector. Two types of numerical models have been developed and validated against experimental results from a full-scale test-site. The validation showed to be a tedious

Complete in vitro life cycle of Trypanosoma congolense: development of genetic tools.

Directory of Open Access Journals (Sweden)

Virginie Coustou

Full Text Available BACKGROUND: Animal African trypanosomosis, a disease mainly caused by the protozoan parasite Trypanosoma congolense, is a major constraint to livestock productivity and has a significant impact in the developing countries of Africa. RNA interference (RNAi has been used to study gene function and identify drug and vaccine targets in a variety of organisms including trypanosomes. However, trypanosome RNAi studies have mainly been conducted in T. brucei, as a model for human infection, largely ignoring livestock parasites of economical importance such as T. congolense, which displays different pathogenesis profiles. The whole T. congolense life cycle can be completed in vitro, but this attractive model displayed important limitations: (i genetic tools were currently limited to insect forms and production of modified infectious BSF through differentiation was never achieved, (ii in vitro differentiation techniques lasted several months, (iii absence of long-term bloodstream forms (BSF in vitro culture prevented genomic analyses. METHODOLOGY/PRINCIPAL FINDINGS: We optimized culture conditions for each developmental stage and secured the differentiation steps. Specifically, we devised a medium adapted for the strenuous development of stable long-term BSF culture. Using Amaxa nucleofection technology, we greatly improved the transfection rate of the insect form and designed an inducible transgene expression system using the IL3000 reference strain. We tested it by expression of reporter genes and through RNAi. Subsequently, we achieved the complete in vitro life cycle with dramatically shortened time requirements for various wild type and transgenic strains. Finally, we established the use of modified strains for experimental infections and underlined a host adaptation phase requirement. CONCLUSIONS/SIGNIFICANCE: We devised an improved T. congolense model, which offers the opportunity to perform functional genomics analyses throughout the whole life

A Hyperbolic Ontology Visualization Tool for Model Application Programming Interface Documentation

Science.gov (United States)

Hyman, Cody

2011-01-01

Spacecraft modeling, a critically important portion in validating planned spacecraft activities, is currently carried out using a time consuming method of mission to mission model implementations and integration. A current project in early development, Integrated Spacecraft Analysis (ISCA), aims to remedy this hindrance by providing reusable architectures and reducing time spent integrating models with planning and sequencing tools. The principle objective of this internship was to develop a user interface for an experimental ontology-based structure visualization of navigation and attitude control system modeling software. To satisfy this, a number of tree and graph visualization tools were researched and a Java based hyperbolic graph viewer was selected for experimental adaptation. Early results show promise in the ability to organize and display large amounts of spacecraft model documentation efficiently and effectively through a web browser. This viewer serves as a conceptual implementation for future development but trials with both ISCA developers and end users should be performed to truly evaluate the effectiveness of continued development of such visualizations.

Positioning Mentoring as a Coach Development Tool: Recommendations for Future Practice and Research

Science.gov (United States)

McQuade, Sarah; Davis, Louise; Nash, Christine

2015-01-01

Current thinking in coach education advocates mentoring as a development tool to connect theory and practice. However, little empirical evidence exists to evaluate the effectiveness of mentoring as a coach development tool. Business, education, and nursing precede the coaching industry in their mentoring practice, and research findings offered in…

Holistic Framework For Establishing Interoperability of Heterogeneous Software Development Tools

National Research Council Canada - National Science Library

Puett, Joseph

2003-01-01

This dissertation presents a Holistic Framework for Software Engineering (HFSE) that establishes collaborative mechanisms by which existing heterogeneous software development tools and models will interoperate...

Development of a fault test experimental facility model using Matlab

Energy Technology Data Exchange (ETDEWEB)

Pereira, Iraci Martinez; Moraes, Davi Almeida, E-mail: martinez@ipen.br, E-mail: dmoraes@dk8.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

The Fault Test Experimental Facility was developed to simulate a PWR nuclear power plant and is instrumented with temperature, level and pressure sensors. The Fault Test Experimental Facility can be operated to generate normal and fault data, and these failures can be added initially small, and their magnitude being increasing gradually. This work presents the Fault Test Experimental Facility model developed using the Matlab GUIDE (Graphical User Interface Development Environment) toolbox that consists of a set of functions designed to create interfaces in an easy and fast way. The system model is based on the mass and energy inventory balance equations. Physical as well as operational aspects are taken into consideration. The interface layout looks like a process flowchart and the user can set the input variables. Besides the normal operation conditions, there is the possibility to choose a faulty variable from a list. The program also allows the user to set the noise level for the input variables. Using the model, data were generated for different operational conditions, both under normal and fault conditions with different noise levels added to the input variables. Data generated by the model will be compared with Fault Test Experimental Facility data. The Fault Test Experimental Facility theoretical model results will be used for the development of a Monitoring and Fault Detection System. (author)

Development of a fault test experimental facility model using Matlab

International Nuclear Information System (INIS)

Pereira, Iraci Martinez; Moraes, Davi Almeida

2015-01-01

The Fault Test Experimental Facility was developed to simulate a PWR nuclear power plant and is instrumented with temperature, level and pressure sensors. The Fault Test Experimental Facility can be operated to generate normal and fault data, and these failures can be added initially small, and their magnitude being increasing gradually. This work presents the Fault Test Experimental Facility model developed using the Matlab GUIDE (Graphical User Interface Development Environment) toolbox that consists of a set of functions designed to create interfaces in an easy and fast way. The system model is based on the mass and energy inventory balance equations. Physical as well as operational aspects are taken into consideration. The interface layout looks like a process flowchart and the user can set the input variables. Besides the normal operation conditions, there is the possibility to choose a faulty variable from a list. The program also allows the user to set the noise level for the input variables. Using the model, data were generated for different operational conditions, both under normal and fault conditions with different noise levels added to the input variables. Data generated by the model will be compared with Fault Test Experimental Facility data. The Fault Test Experimental Facility theoretical model results will be used for the development of a Monitoring and Fault Detection System. (author)

PTaaS: Platform for Providing Software Developing Applications and Tools as a Service

DEFF Research Database (Denmark)

Chauhan, Muhammad Aufeef; Babar, Muhammad Ali

2014-01-01

technological support for it that is not limited to one specific tools and a particular phase of software development life cycle. In this thesis, we have explored the possibility of offering software development applications and tools as services that can be acquired on demand according to the software...... with process. Information gained from the review of literature on GSD tools and processes is used to extract functional requirements for the middleware platform for provisioning of software development applications and tools as services. Finding from the review of literature on architecture solutions for cloud......Cloud computing has become an established paradigm for enabling organizations to build scalable software systems and to meet challenges of rapid demand of computing and storage resources. There has been a significant success in building cloud-enabled applications for many disciplines ranging from...

Using an evaluative tool to develop effective mathscasts

Science.gov (United States)

Galligan, Linda; Hobohm, Carola; Peake, Katherine

2017-09-01

This study is situated in a course designed for both on-campus and online pre-service and in-service teachers, where student-created mathscasts provide a way for university lecturers to assess students' quality of teaching, and understanding of mathematics. Teachers and pre-service teachers, in a university course with 90% online enrolment, were asked to create mathscasts to explain mathematics concepts at middle school level. This paper describes the process of developing and refining a tool for the creation and evaluation of quality student-produced mathscasts. The study then investigates the usefulness of the tool within the context of pedagogy and mathematical understanding. Despite an abundance of mathscasts already available on the web, there is merit in creating mathscasts, not only as a tool for teaching, but also as a means of learning by doing. The premise for creating student-produced mathscasts was to capture the creators' mathematical understanding and pedagogical approach to teaching a mathematical concept, which were then peer-assessed and graded. The analysis included surveys, practice mathscasts with peer- and self-reviews, and students' final assessed mathscasts. The results indicate that the use of the evaluative tool resulted in an improvement in quality of student-created mathscasts and critiques thereof. The paper concludes with a discussion on future directions of student-produced mathscasts.

Prototype Development of a Tradespace Analysis Tool for Spaceflight Medical Resources.

Science.gov (United States)

Antonsen, Erik L; Mulcahy, Robert A; Rubin, David; Blue, Rebecca S; Canga, Michael A; Shah, Ronak

2018-02-01

The provision of medical care in exploration-class spaceflight is limited by mass, volume, and power constraints, as well as limitations of available skillsets of crewmembers. A quantitative means of exploring the risks and benefits of inclusion or exclusion of onboard medical capabilities may help to inform the development of an appropriate medical system. A pilot project was designed to demonstrate the utility of an early tradespace analysis tool for identifying high-priority resources geared toward properly equipping an exploration mission medical system. Physician subject matter experts identified resources, tools, and skillsets required, as well as associated criticality scores of the same, to meet terrestrial, U.S.-specific ideal medical solutions for conditions concerning for exploration-class spaceflight. A database of diagnostic and treatment actions and resources was created based on this input and weighed against the probabilities of mission-specific medical events to help identify common and critical elements needed in a future exploration medical capability. Analysis of repository data demonstrates the utility of a quantitative method of comparing various medical resources and skillsets for future missions. Directed database queries can provide detailed comparative estimates concerning likelihood of resource utilization within a given mission and the weighted utility of tangible and intangible resources. This prototype tool demonstrates one quantitative approach to the complex needs and limitations of an exploration medical system. While this early version identified areas for refinement in future version development, more robust analysis tools may help to inform the development of a comprehensive medical system for future exploration missions.Antonsen EL, Mulcahy RA, Rubin D, Blue RS, Canga MA, Shah R. Prototype development of a tradespace analysis tool for spaceflight medical resources. Aerosp Med Hum Perform. 2018; 89(2):108-114.

Health impact assessment in planning: Development of the design for health HIA tools

International Nuclear Information System (INIS)

Forsyth, Ann; Slotterback, Carissa Schively; Krizek, Kevin J.

2010-01-01

How can planners more systematically incorporate health concerns into practical planning processes? This paper describes a suite of health impact assessment tools (HIAs) developed specifically for planning practice. Taking an evidence-based approach the tools are designed to fit into existing planning activities. The tools include: a short audit tool, the Preliminary Checklist; a structured participatory workshop, the Rapid HIA; an intermediate health impact assessment, the Threshold Analysis; and a set of Plan Review Checklists. This description provides a basis for future work including assessing tool validity, refining specific tools, and creating alternatives.

Water Loss Management: Tools and Methods for Developing Countries

NARCIS (Netherlands)

Mutikanga, H.E.

2012-01-01

Water utilities in developing countries are struggling to provide customers with a reliable level of service due to their peculiar water distribution characteristics including poorly zoned networks with irregular supply operating under restricted budgets. These unique conditions demand unique tools

Water Loss Management : Tools and Methods for Developing Countries

NARCIS (Netherlands)

Mutikanga, H.E.

2012-01-01

Water utilities in developing countries are struggling to provide customers with a reliable level of service due to their peculiar water distribution characteristics including poorly zoned networks with irregular supply operating under restricted budgets. These unique conditions demand unique tools

Towards long-distance quantum communication: new techniques and tools

International Nuclear Information System (INIS)

Lukin, M.

2005-01-01

Full text: We will describe our efforts to develop new techniques and tools for long-distance quantum communication. Specifically we will discuss recent experimental work towards developing elements for long-distance quantum communication using atomic ensembles. In addition, we will describe a novel approach to long-distance quantum communication that is based on solid-state single photon emitters. (author)

Development of the Biological Experimental Design Concept Inventory (BEDCI)

Science.gov (United States)

Deane, Thomas; Nomme, Kathy; Jeffery, Erica; Pollock, Carol; Birol, Gulnur

2014-01-01

Interest in student conception of experimentation inspired the development of a fully validated 14-question inventory on experimental design in biology (BEDCI) by following established best practices in concept inventory (CI) design. This CI can be used to diagnose specific examples of non-expert-like thinking in students and to evaluate the…

Development of bilingual tools to assess functional health patterns.

Science.gov (United States)

Krozy, R E; McCarthy, N C

1999-01-01

The theory and process of developing bilingual assessment tools based on Gordon's 11 functional health patterns. To facilitate assessing the individual, family, and community in a student clinical practicum in a Spanish-speaking country. Multiple family and community health promotion theories; translation theories, Gordon's Manual of Nursing Diagnosis (1982); translation/back-translation involving Ecuadorian faculty and students; student community assessments; faculty and staff workshops in Ecuador. Bilingual, culturally sensitive health assessment tools facilitate history taking, establish nursing diagnoses and interventions, and promote mutual learning. These outcomes demonstrate potential application to other systems in the international nursing community.

XSC plasma control: Tool development for the session leader

International Nuclear Information System (INIS)

Ambrosino, G.; Albanese, R.; Ariola, M.; Cenedese, A.; Crisanti, F.; Tommasi, G. De; Mattei, M.; Piccolo, F.; Pironti, A.; Sartori, F.; Villone, F.

2005-01-01

A new model-based shape controller (XSC, i.e., eXtreme Shape Controller) able to operate with high elongation and triangularity plasmas has been designed and implemented at JET in 2003. The use of the XSC needs a number of steps, which at present are not automated and therefore imply the involvement of several experts. To help the session leader in preparing an experiment, a number of software tools are needed. The paper describes the SW tools that are currently in the developing phase, and describes the new framework for the preparation of a JET experiment

Developing a user-perception assessment tool for health facilities in South Africa

CSIR Research Space (South Africa)

Saidi, M

2007-06-01

Full Text Available . The broader tool is envisaged to assess the performance of health facilities in areas of functionality, impact, and building durability and quality. The process will involve developing and testing the tool at a pilot hospital in the country...

A multisource feedback tool to assess ward round leadership skills of senior paediatric trainees: (1) Development of tool.

Science.gov (United States)

Lakshminarayana, Indumathy; Wall, David; Bindal, Taruna; Goodyear, Helen M

2015-05-01

Leading a ward round is an essential skill for hospital consultants and senior trainees but is rarely assessed during training. To investigate the key attributes for ward round leadership and to use these results to develop a multisource feedback (MSF) tool to assess the ward round leadership skills of senior specialist trainees. A panel of experts comprising four senior paediatric consultants and two nurse managers were interviewed from May to August 2009. From analysis of the interview transcripts, 10 key themes emerged. A structured questionnaire based on the key themes was designed and sent electronically to paediatric consultants, nurses and trainees at a large university hospital (June-October 2010). 81 consultants, nurses and trainees responded to the survey. The internal consistency of this tool was high (Cronbach's α 0.95). Factor analysis showed that five factors accounted for 72% of variance. The five key areas for ward round leadership were communication skills, preparation and organisation, teaching and enthusiasm, team working and punctuality; communication was the most important key theme. A MSF tool for ward round leadership skills was developed with these areas as five domains. We believe that this tool will add to the current assessment tools available by providing feedback about ward round leadership skills. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Lessons learned applying CASE methods/tools to Ada software development projects

Science.gov (United States)

Blumberg, Maurice H.; Randall, Richard L.

1993-01-01

This paper describes the lessons learned from introducing CASE methods/tools into organizations and applying them to actual Ada software development projects. This paper will be useful to any organization planning to introduce a software engineering environment (SEE) or evolving an existing one. It contains management level lessons learned, as well as lessons learned in using specific SEE tools/methods. The experiences presented are from Alpha Test projects established under the STARS (Software Technology for Adaptable and Reliable Systems) project. They reflect the front end efforts by those projects to understand the tools/methods, initial experiences in their introduction and use, and later experiences in the use of specific tools/methods and the introduction of new ones.

An evaluation of software tools for the design and development of cockpit displays

Science.gov (United States)

Ellis, Thomas D., Jr.

1993-01-01

The use of all-glass cockpits at the NASA Langley Research Center (LaRC) simulation facility has changed the means of design, development, and maintenance of instrument displays. The human-machine interface has evolved from a physical hardware device to a software-generated electronic display system. This has subsequently caused an increased workload at the facility. As computer processing power increases and the glass cockpit becomes predominant in facilities, software tools used in the design and development of cockpit displays are becoming both feasible and necessary for a more productive simulation environment. This paper defines LaRC requirements of a display software development tool and compares two available applications against these requirements. As a part of the software engineering process, these tools reduce development time, provide a common platform for display development, and produce exceptional real-time results.

Mechanism-Based FE Simulation of Tool Wear in Diamond Drilling of SiCp/Al Composites.

Science.gov (United States)

Xiang, Junfeng; Pang, Siqin; Xie, Lijing; Gao, Feinong; Hu, Xin; Yi, Jie; Hu, Fang

2018-02-07

The aim of this work is to analyze the micro mechanisms underlying the wear of macroscale tools during diamond machining of SiC p /Al6063 composites and to develop the mechanism-based diamond wear model in relation to the dominant wear behaviors. During drilling, high volume fraction SiC p /Al6063 composites containing Cu, the dominant wear mechanisms of diamond tool involve thermodynamically activated physicochemical wear due to diamond-graphite transformation catalyzed by Cu in air atmosphere and mechanically driven abrasive wear due to high-frequency scrape of hard SiC reinforcement on tool surface. An analytical diamond wear model, coupling Usui abrasive wear model and Arrhenius extended graphitization wear model was proposed and implemented through a user-defined subroutine for tool wear estimates. Tool wear estimate in diamond drilling of SiC p /Al6063 composites was achieved by incorporating the combined abrasive-chemical tool wear subroutine into the coupled thermomechanical FE model of 3D drilling. The developed drilling FE model for reproducing diamond tool wear was validated for feasibility and reliability by comparing numerically simulated tool wear morphology and experimentally observed results after drilling a hole using brazed polycrystalline diamond (PCD) and chemical vapor deposition (CVD) diamond coated tools. A fairly good agreement of experimental and simulated results in cutting forces, chip and tool wear morphologies demonstrates that the developed 3D drilling FE model, combined with a subroutine for diamond tool wear estimate can provide a more accurate analysis not only in cutting forces and chip shape but also in tool wear behavior during drilling SiC p /Al6063 composites. Once validated and calibrated, the developed diamond tool wear model in conjunction with other machining FE models can be easily extended to the investigation of tool wear evolution with various diamond tool geometries and other machining processes in cutting different

Experimental benchmark and code validation for airfoils equipped with passive vortex generators

International Nuclear Information System (INIS)

Baldacchino, D; Ferreira, C; Florentie, L; Timmer, N; Van Zuijlen, A; Manolesos, M; Chaviaropoulos, T; Diakakis, K; Papadakis, G; Voutsinas, S; González Salcedo, Á; Aparicio, M; García, N R.; Sørensen, N N.; Troldborg, N

2016-01-01

Experimental results and complimentary computations for airfoils with vortex generators are compared in this paper, as part of an effort within the AVATAR project to develop tools for wind turbine blade control devices. Measurements from two airfoils equipped with passive vortex generators, a 30% thick DU97W300 and an 18% thick NTUA T18 have been used for benchmarking several simulation tools. These tools span low-to-high complexity, ranging from engineering-level integral boundary layer tools to fully-resolved computational fluid dynamics codes. Results indicate that with appropriate calibration, engineering-type tools can capture the effects of vortex generators and outperform more complex tools. Fully resolved CFD comes at a much higher computational cost and does not necessarily capture the increased lift due to the VGs. However, in lieu of the limited experimental data available for calibration, high fidelity tools are still required for assessing the effect of vortex generators on airfoil performance. (paper)

Development of a Safety Management Web Tool for Horse Stables.

Science.gov (United States)

Leppälä, Jarkko; Kolstrup, Christina Lunner; Pinzke, Stefan; Rautiainen, Risto; Saastamoinen, Markku; Särkijärvi, Susanna

2015-11-12

Managing a horse stable involves risks, which can have serious consequences for the stable, employees, clients, visitors and horses. Existing industrial or farm production risk management tools are not directly applicable to horse stables and they need to be adapted for use by managers of different types of stables. As a part of the InnoEquine project, an innovative web tool, InnoHorse, was developed to support horse stable managers in business, safety, pasture and manure management. A literature review, empirical horse stable case studies, expert panel workshops and stakeholder interviews were carried out to support the design. The InnoHorse web tool includes a safety section containing a horse stable safety map, stable safety checklists, and examples of good practices in stable safety, horse handling and rescue planning. This new horse stable safety management tool can also help in organizing work processes in horse stables in general.

Holistic Framework For Establishing Interoperability of Heterogeneous Software Development Tools

National Research Council Canada - National Science Library

Puett, Joseph

2003-01-01

...; however, this research focuses on establishing a holistic approach over the entire development effort where unrealized synergies and dependencies between all of the tools' artifacts can be visualized...

Development and content validation of the power mobility training tool.

Science.gov (United States)

Kenyon, Lisa K; Farris, John P; Cain, Brett; King, Emily; VandenBerg, Ashley

2018-01-01

This paper outlines the development and content validation of the power mobility training tool (PMTT), an observational tool designed to assist therapists in developing power mobility training programs for children who have multiple, severe impairments. Initial items on the PMTT were developed based on a literature review and in consultation with therapists experienced in the use of power mobility. Items were trialled in clinical settings, reviewed, and refined. Items were then operationalized and an administration manual detailing scoring for each item was created. Qualitative and quantitative methods were used to establish content validity via a 15 member, international expert panel. The content validity ratio (CVR) was determined for each possible item. Of the 19 original items, 10 achieved minimum required CVR values and were included in the final version of the PMTT. Items related to manoeuvring a power mobility device were merged and an item related to the number of switches used concurrently to operate a power mobility device were added to the PMTT. The PMTT may assist therapists in developing training programs that facilitate the acquisition of beginning power mobility skills in children who have multiple, severe impairments. Implications for Rehabilitation The Power Mobility Training Tool (PMTT) was developed to help guide the development of power mobility intervention programs for children who have multiple, severe impairments. The PMTT can be used with children who access a power mobility device using either a joystick or a switch. Therapists who have limited experience with power mobility may find the PMTT to be helpful in setting up and conducting power mobility training interventions as a feasible aspect of a plan of care for children who have multiple, severe impairments.

Method and Tools for Development of Advanced Instructional Systems

NARCIS (Netherlands)

Arend, J. van der; Riemersma, J.B.J.

1994-01-01

The application of advanced instructional systems (AISs), like computer-based training systems, intelligent tutoring systems and training simulators, is widely spread within the Royal Netherlands Army. As a consequence there is a growing interest in methods and tools to develop effective and

Developing a practical evaluation tool for preceptor use.

Science.gov (United States)

Walsh, Catherine M; Seldomridge, Lisa A; Badros, Karen K

2008-01-01

After years of dissatisfaction with existing instruments, a tool for preceptors to evaluate an undergraduate student's clinical performance was developed, with preceptors' input in its construction. A 2-year pilot evaluation revealed notable problems including excessively high preceptor ratings and significant disparities between faculty and preceptor ratings. Further revisions were made, reducing indicators to those which the preceptors can actually evaluate on an everyday basis and developing a rubric. Additional recommendations to bolster the quality of ratings are improving orientation and guidance of preceptors and modifying procedures for giving feedback.

Improving Escalation of Care: Development and Validation of the Quality of Information Transfer Tool.

Science.gov (United States)

Johnston, Maximilian J; Arora, Sonal; Pucher, Philip H; Reissis, Yannis; Hull, Louise; Huddy, Jeremy R; King, Dominic; Darzi, Ara

2016-03-01

To develop and provide validity and feasibility evidence for the QUality of Information Transfer (QUIT) tool. Prompt escalation of care in the setting of patient deterioration can prevent further harm. Escalation and information transfer skills are not currently measured in surgery. This study comprised 3 phases: the development (phase 1), validation (phase 2), and feasibility analysis (phase 3) of the QUIT tool. Phase 1 involved identification of core skills needed for successful escalation of care through literature review and 33 semistructured interviews with stakeholders. Phase 2 involved the generation of validity evidence for the tool using a simulated setting. Thirty surgeons assessed a deteriorating postoperative patient in a simulated ward and escalated their care to a senior colleague. The face and content validity were assessed using a survey. Construct and concurrent validity of the tool were determined by comparing performance scores using the QUIT tool with those measured using the Situation-Background-Assessment-Recommendation (SBAR) tool. Phase 3 was conducted using direct observation of escalation scenarios on surgical wards in 2 hospitals. A 7-category assessment tool was developed from phase 1 consisting of 24 items. Twenty-one of 24 items had excellent content validity (content validity index >0.8). All 7 categories and 18 of 24 (P validity. The correlation between the QUIT and SBAR tools used was strong indicating concurrent validity (r = 0.694, P information transfer skills than nurses when faced with a deteriorating patient. A validated tool to assess information transfer for deteriorating surgical patients was developed and tested using simulation and real-time clinical scenarios. It may improve the quality and safety of patient care on the surgical ward.

Development of novel tools to measure food neophobia in children

DEFF Research Database (Denmark)

Damsbo-Svendsen, Marie; Frøst, Michael Bom; Olsen, Annemarie

2017-01-01

The main tool currently used to measure food neophobia (the Food Neophobia Scale, FNS, developed by Pliner & Hobden, 1992) may not remain optimal forever. It was developed around 25 years ago, and the perception and availability of “novel” and “ethnic” foods may have changed in the meantime. Cons...

Developing next-generation telehealth tools and technologies: patients, systems, and data perspectives.

Science.gov (United States)

Ackerman, Michael J; Filart, Rosemarie; Burgess, Lawrence P; Lee, Insup; Poropatich, Ronald K

2010-01-01

The major goals of telemedicine today are to develop next-generation telehealth tools and technologies to enhance healthcare delivery to medically underserved populations using telecommunication technology, to increase access to medical specialty services while decreasing healthcare costs, and to provide training of healthcare providers, clinical trainees, and students in health-related fields. Key drivers for these tools and technologies are the need and interest to collaborate among telehealth stakeholders, including patients, patient communities, research funders, researchers, healthcare services providers, professional societies, industry, healthcare management/economists, and healthcare policy makers. In the development, marketing, adoption, and implementation of these tools and technologies, communication, training, cultural sensitivity, and end-user customization are critical pieces to the process. Next-generation tools and technologies are vehicles toward personalized medicine, extending the telemedicine model to include cell phones and Internet-based telecommunications tools for remote and home health management with video assessment, remote bedside monitoring, and patient-specific care tools with event logs, patient electronic profile, and physician note-writing capability. Telehealth is ultimately a system of systems in scale and complexity. To cover the full spectrum of dynamic and evolving needs of end-users, we must appreciate system complexity as telehealth moves toward increasing functionality, integration, interoperability, outreach, and quality of service. Toward that end, our group addressed three overarching questions: (1) What are the high-impact topics? (2) What are the barriers to progress? and (3) What roles can the National Institutes of Health and its various institutes and centers play in fostering the future development of telehealth?

Development of probabilistic thinking-oriented learning tools for probability materials at junior high school students

Science.gov (United States)

Sari, Dwi Ivayana; Hermanto, Didik

2017-08-01

This research is a developmental research of probabilistic thinking-oriented learning tools for probability materials at ninth grade students. This study is aimed to produce a good probabilistic thinking-oriented learning tools. The subjects were IX-A students of MTs Model Bangkalan. The stages of this development research used 4-D development model which has been modified into define, design and develop. Teaching learning tools consist of lesson plan, students' worksheet, learning teaching media and students' achievement test. The research instrument used was a sheet of learning tools validation, a sheet of teachers' activities, a sheet of students' activities, students' response questionnaire and students' achievement test. The result of those instruments were analyzed descriptively to answer research objectives. The result was teaching learning tools in which oriented to probabilistic thinking of probability at ninth grade students which has been valid. Since teaching and learning tools have been revised based on validation, and after experiment in class produced that teachers' ability in managing class was effective, students' activities were good, students' responses to the learning tools were positive and the validity, sensitivity and reliability category toward achievement test. In summary, this teaching learning tools can be used by teacher to teach probability for develop students' probabilistic thinking.

Development of a versatile user-friendly IBA experimental chamber

Energy Technology Data Exchange (ETDEWEB)

Kakuee, Omidreza; Fathollahi, Vahid; Lamehi-Rachti, Mohammad

2016-03-15

Reliable performance of the Ion Beam Analysis (IBA) techniques is based on the accurate geometry of the experimental setup, employment of the reliable nuclear data and implementation of dedicated analysis software for each of the IBA techniques. It has already been shown that geometrical imperfections lead to significant uncertainties in quantifications of IBA measurements. To minimize these uncertainties, a user-friendly experimental chamber with a heuristic sample positioning system for IBA analysis was recently developed in the Van de Graaff laboratory in Tehran. This system enhances IBA capabilities and in particular Nuclear Reaction Analysis (NRA) and Elastic Recoil Detection Analysis (ERDA) techniques. The newly developed sample manipulator provides the possibility of both controlling the tilt angle of the sample and analyzing samples with different thicknesses. Moreover, a reasonable number of samples can be loaded in the sample wheel. A comparison of the measured cross section data of the {sup 16}O(d,p{sub 1}){sup 17}O reaction with the data reported in the literature confirms the performance and capability of the newly developed experimental chamber.

Development of a versatile user-friendly IBA experimental chamber

Science.gov (United States)

Kakuee, Omidreza; Fathollahi, Vahid; Lamehi-Rachti, Mohammad

2016-03-01

Reliable performance of the Ion Beam Analysis (IBA) techniques is based on the accurate geometry of the experimental setup, employment of the reliable nuclear data and implementation of dedicated analysis software for each of the IBA techniques. It has already been shown that geometrical imperfections lead to significant uncertainties in quantifications of IBA measurements. To minimize these uncertainties, a user-friendly experimental chamber with a heuristic sample positioning system for IBA analysis was recently developed in the Van de Graaff laboratory in Tehran. This system enhances IBA capabilities and in particular Nuclear Reaction Analysis (NRA) and Elastic Recoil Detection Analysis (ERDA) techniques. The newly developed sample manipulator provides the possibility of both controlling the tilt angle of the sample and analyzing samples with different thicknesses. Moreover, a reasonable number of samples can be loaded in the sample wheel. A comparison of the measured cross section data of the 16O(d,p1)17O reaction with the data reported in the literature confirms the performance and capability of the newly developed experimental chamber.

ARBOOK: Development and Assessment of a Tool Based on Augmented Reality for Anatomy

Science.gov (United States)

Ferrer-Torregrosa, J.; Torralba, J.; Jimenez, M. A.; García, S.; Barcia, J. M.

2015-01-01

The evolution of technologies and the development of new tools with educational purposes are growing up. This work presents the experience of a new tool based on augmented reality (AR) focusing on the anatomy of the lower limb. ARBOOK was constructed and developed based on TC and MRN images, dissections and drawings. For ARBOOK evaluation, a…

Development of high-speed and wide-angle visible observation diagnostics on Experimental Advanced Superconducting Tokamak using catadioptric optics

International Nuclear Information System (INIS)

Yang, J. H.; Hu, L. Q.; Zang, Q.; Han, X. F.; Shao, C. Q.; Sun, T. F.; Chen, H.; Wang, T. F.; Li, F. J.; Hu, A. L.; Yang, X. F.

2013-01-01

A new wide-angle endoscope for visible light observation on the Experimental Advanced Superconducting Tokamak (EAST) has been recently developed. The head section of the optical system is based on a mirror reflection design that is similar to the International Thermonuclear Experimental Reactor-like wide-angle observation diagnostic on the Joint European Torus. However, the optical system design has been simplified and improved. As a result, the global transmittance of the system is as high as 79.6% in the wavelength range from 380 to 780 nm, and the spatial resolution is <5 mm for the full depth of field (4000 mm). The optical system also has a large relative aperture (1:2.4) and can be applied in high-speed camera diagnostics. As an important diagnostic tool, the optical system has been installed on the HT-7 (Hefei Tokamak-7) for its final experimental campaign, and the experiments confirmed that it can be applied to the investigation of transient processes in plasma, such as ELMy eruptions in H-mode, on EAST

Networks as Tools for Sustainable Urban Development

DEFF Research Database (Denmark)

Jensen, Jesper Ole; Tollin, Nicola

will be discussed through a case study of a Danish municipal network on Sustainable Development, Dogme 20001. This network has become quite successful in terms of learning and innovation, committing actors, and influencing local policies, to a larger extent than other SUD-networks the municipalities are involved in....... By applying the GREMI2-theories of “innovative milieux” (Aydalot, 1986; Camagni, 1991) to the case study, we will suggest some reasons for the benefits achieved by the Dogme-network, compared to other networks. This analysis will point to the existence of an “innovative milieu” on sustainability within......Due to the increasing number of networks related to sustainable development (SUD) the paper focuses on understanding in which way networks can be considered useful tools for sustainable urban development, taking particularly into consideration the networks potential of spreading innovative policies...

A Modeling Tool for Household Biogas Burner Flame Port Design

Science.gov (United States)

Decker, Thomas J.

Anaerobic digestion is a well-known and potentially beneficial process for rural communities in emerging markets, providing the opportunity to generate usable gaseous fuel from agricultural waste. With recent developments in low-cost digestion technology, communities across the world are gaining affordable access to the benefits of anaerobic digestion derived biogas. For example, biogas can displace conventional cooking fuels such as biomass (wood, charcoal, dung) and Liquefied Petroleum Gas (LPG), effectively reducing harmful emissions and fuel cost respectively. To support the ongoing scaling effort of biogas in rural communities, this study has developed and tested a design tool aimed at optimizing flame port geometry for household biogas-fired burners. The tool consists of a multi-component simulation that incorporates three-dimensional CAD designs with simulated chemical kinetics and computational fluid dynamics. An array of circular and rectangular port designs was developed for a widely available biogas stove (called the Lotus) as part of this study. These port designs were created through guidance from previous studies found in the literature. The three highest performing designs identified by the tool were manufactured and tested experimentally to validate tool output and to compare against the original port geometry. The experimental results aligned with the tool's prediction for the three chosen designs. Each design demonstrated improved thermal efficiency relative to the original, with one configuration of circular ports exhibiting superior performance. The results of the study indicated that designing for a targeted range of port hydraulic diameter, velocity and mixture density in the tool is a relevant way to improve the thermal efficiency of a biogas burner. Conversely, the emissions predictions made by the tool were found to be unreliable and incongruent with laboratory experiments.

HCI^2 Workbench: A Development Tool for Multimodal Human-Computer Interaction Systems

NARCIS (Netherlands)

Shen, Jie; Wenzhe, Shi; Pantic, Maja

In this paper, we present a novel software tool designed and implemented to simplify the development process of Multimodal Human-Computer Interaction (MHCI) systems. This tool, which is called the HCI^2 Workbench, exploits a Publish / Subscribe (P/S) architecture [13] [14] to facilitate efficient

Design and Development Tools for the Systems Engineering Experience Accelerator. Volume 1

Science.gov (United States)

2015-04-20

important ones for inclusion in this work. Others include: • Experience concept tools ( storyboarding , learner profile creation, 9 • Context tools...particular scenario (e.g., a particular DoD program) for the experience that supports the desired learning and develop a storyboard for the desired

DEVELOPMENT OF THE U.S. EPA'S METAL FINISHING FACILITY POLLUTION PREVENTION TOOL

Science.gov (United States)

Metal finishing processes are a type of chemical processes and can be modeled using Computer Aided Process Engineering (CAPE). Currently, the U.S. EPA is developing the Metal Finishing Facility Pollution Prevention Tool (MFFP2T), a pollution prevention software tool for the meta...

Experimental investigation and optimization of welding process parameters for various steel grades using NN tool and Taguchi method

Science.gov (United States)

Soni, Sourabh Kumar; Thomas, Benedict

2018-04-01

The term "weldability" has been used to describe a wide variety of characteristics when a material is subjected to welding. In our analysis we perform experimental investigation to estimate the tensile strength of welded joint strength and then optimization of welding process parameters by using taguchi method and Artificial Neural Network (ANN) tool in MINITAB and MATLAB software respectively. The study reveals the influence on weldability of steel by varying composition of steel by mechanical characterization. At first we prepare the samples of different grades of steel (EN8, EN 19, EN 24). The samples were welded together by metal inert gas welding process and then tensile testing on Universal testing machine (UTM) was conducted for the same to evaluate the tensile strength of the welded steel specimens. Further comparative study was performed to find the effects of welding parameter on quality of weld strength by employing Taguchi method and Neural Network tool. Finally we concluded that taguchi method and Neural Network Tool is much efficient technique for optimization.

Transformational Tools and Technologies Project

Data.gov (United States)

National Aeronautics and Space Administration — The Transformational Tools and Technologies (TTT) Project advances state-of-the-art computational and experimental tools and technologies that are vital to aviation...

TAxonomy of Self-reported Sedentary behaviour Tools (TASST) framework for development, comparison and evaluation of self-report tools: content analysis and systematic review.

Science.gov (United States)

Dall, P M; Coulter, E H; Fitzsimons, C F; Skelton, D A; Chastin, Sfm

2017-04-08

Sedentary behaviour (SB) has distinct deleterious health outcomes, yet there is no consensus on best practice for measurement. This study aimed to identify the optimal self-report tool for population surveillance of SB, using a systematic framework. A framework, TAxonomy of Self-reported Sedentary behaviour Tools (TASST), consisting of four domains (type of assessment, recall period, temporal unit and assessment period), was developed based on a systematic inventory of existing tools. The inventory was achieved through a systematic review of studies reporting SB and tracing back to the original description. A systematic review of the accuracy and sensitivity to change of these tools was then mapped against TASST domains. Systematic searches were conducted via EBSCO, reference lists and expert opinion. The inventory included tools measuring SB in adults that could be self-completed at one sitting, and excluded tools measuring SB in specific populations or contexts. The systematic review included studies reporting on the accuracy against an objective measure of SB and/or sensitivity to change of a tool in the inventory. The systematic review initially identified 32 distinct tools (141 questions), which were used to develop the TASST framework. Twenty-two studies evaluated accuracy and/or sensitivity to change representing only eight taxa. Assessing SB as a sum of behaviours and using a previous day recall were the most promising features of existing tools. Accuracy was poor for all existing tools, with underestimation and overestimation of SB. There was a lack of evidence about sensitivity to change. Despite the limited evidence, mapping existing SB tools onto the TASST framework has enabled informed recommendations to be made about the most promising features for a surveillance tool, identified aspects on which future research and development of SB surveillance tools should focus. International prospective register of systematic reviews (PROPSPERO)/CRD42014009851

Development, use, and validation of the CFD tool FLACS for hydrogen safety studies

Energy Technology Data Exchange (ETDEWEB)

Middha, Prankul

2010-07-01

successfully performed. However, CFD tools must be validated against representative experimental data, involving combined release and ignition scenarios, in order to have a real predictive capability in accidental situations. Therefore, a detailed study involving release and ignition experiments from FZK has been carried out. Work has also been done for developing risk analysis methods specific to hydrogen applications. Quantitative Risk Assessments (QRA) of hydrogen applications presents new challenges due to a large difference in properties of hydrogen and natural gas, namely in reactivity, flammability limits, buoyancy and transport properties. However, it is not realistic to perform an extensive risk assessment for all hydrogen applications similar to that carried out for petrochemical installations. On the other hand, simplified tools and techniques based on codes and standards likely have a limited applicability, as these are not able to represent actual geometry and physics of the explosion. A 3-step approach is proposed, in which the CFD-tool FLACS is used to estimate the risk. The initial approach is to carry out a 'worst-case' calculation evaluating the consequences if a full stoichiometric gas cloud is ignited. Mitigation measures can also be considered. As a second step, if potential consequences of the initial approach are not acceptable, the assumptions are refined and more calculations are performed to make the evaluations more realistic and reduce unnecessary conservatism of the chosen worst-case scenarios. Typically a number of dispersion calculations are performed to generate likely gas clouds, which are subsequently ignited. If estimated consequences are still not acceptable, a more comprehensive study, including ventilation, dispersion and explosion, is performed to evaluate the probability for unacceptable events. Calculation examples have been used to illustrate the different approaches. The proposed approach is thus very flexible, and can be

Development of an experimental apparatus for boiling analysis

International Nuclear Information System (INIS)

Castro, A.J.A. de.

1984-04-01

The nucleate boiling is the most interesting boiling regime for practical appliccations, including nuclear reactor engineering. such regime is characterized by very high heat transfer rates with only small surface superheating. An experimental apparatus is developed for studying parameters which affect nucleate boiling. The following parameters are analysed: pressure, fluid velocity and the fluid temperature at the test section entrance. The performance of experimental apparatus is analysed by results and by problems raised by the oeration of setup. (Author) [pt

Uranium dioxide-sodium interactions. Development of a theoretical model. Fitting of this model to the experimental results

International Nuclear Information System (INIS)

Syrmalenios, Panayotis

1973-01-01

This research thesis addresses the issue of safety of fast neutron reactors, and more particularly is a contribution of the study of mechanisms of interaction between molten fuel and sodium. It aims at developing tools of prediction of consequences of three main types of accidents: local fusion of a fuel rod and contact of the fuel with the surrounding sodium, failure of an assembly due to the fusion of several rods and fuel-coolant interaction within the assembly, and fuel-coolant interaction at the level of the reactor core. The author first proposes a bibliographical analysis of experimental and theoretical studies related to this issue of interaction between a hot body and a cold liquid, and of its consequences. Then, he introduces a mathematical model and its resolution method, and reports the use of the associated code (Corfou) for the interpretation of experimental results: expulsion of cold sodium column by expansion of an overheated sodium mass, fusion of a rod by Joule effect, interaction between UO_2 molten by high frequency with liquid sodium. Finally, the author discusses a comparison between the Corfou code and other models which are being currently developed [fr

Prediction and Control of Cutting Tool Vibration in Cnc Lathe with Anova and Ann

Directory of Open Access Journals (Sweden)

S. S. Abuthakeer

2011-06-01

Full Text Available Machining is a complex process in which many variables can deleterious the desired results. Among them, cutting tool vibration is the most critical phenomenon which influences dimensional precision of the components machined, functional behavior of the machine tools and life of the cutting tool. In a machining operation, the cutting tool vibrations are mainly influenced by cutting parameters like cutting speed, depth of cut and tool feed rate. In this work, the cutting tool vibrations are controlled using a damping pad made of Neoprene. Experiments were conducted in a CNC lathe where the tool holder is supported with and without damping pad. The cutting tool vibration signals were collected through a data acquisition system supported by LabVIEW software. To increase the buoyancy and reliability of the experiments, a full factorial experimental design was used. Experimental data collected were tested with analysis of variance (ANOVA to understand the influences of the cutting parameters. Empirical models have been developed using analysis of variance (ANOVA. Experimental studies and data analysis have been performed to validate the proposed damping system. Multilayer perceptron neural network model has been constructed with feed forward back-propagation algorithm using the acquired data. On the completion of the experimental test ANN is used to validate the results obtained and also to predict the behavior of the system under any cutting condition within the operating range. The onsite tests show that the proposed system reduces the vibration of cutting tool to a greater extend.

Two tools for environmentally conscious designers and product developers of electrical & electronic equipment (EEE)

DEFF Research Database (Denmark)

Poll, Christian; Hauschild, Michael Zwicky; Olsen, Stig Irving

2002-01-01

The paper presents the two tools 1)"Product families - short cuts to environmental knowledge" and 2)"Eco-conscious design of electrical & electronic equipment (EEE)". Tool 1) comes in form of a handbook. The purpose of this handbook is to ease the work with developing more environmentally sound...... products, thus giving guidelines for development of new products without the companies themselves having to perform an LCA. The handbook describes 5 productfamilies: mobile phones, vacuum cleaners, industrial valves with electronic controls, lighting, ventilation. Tool 2) comes in form of a software tool...... with built in training, guidance, references, calculator and database. The tool provides the basic understanding of how EEE-products in general interact with the environment. The tool gives an overview of the tasks and responsibilities involved in Eco-Desing, and examples of how to choose and quantify...

Software engineering methodologies and tools

Science.gov (United States)

Wilcox, Lawrence M.

1993-01-01

Over the years many engineering disciplines have developed, including chemical, electronic, etc. Common to all engineering disciplines is the use of rigor, models, metrics, and predefined methodologies. Recently, a new engineering discipline has appeared on the scene, called software engineering. For over thirty years computer software has been developed and the track record has not been good. Software development projects often miss schedules, are over budget, do not give the user what is wanted, and produce defects. One estimate is there are one to three defects per 1000 lines of deployed code. More and more systems are requiring larger and more complex software for support. As this requirement grows, the software development problems grow exponentially. It is believed that software quality can be improved by applying engineering principles. Another compelling reason to bring the engineering disciplines to software development is productivity. It has been estimated that productivity of producing software has only increased one to two percent a year in the last thirty years. Ironically, the computer and its software have contributed significantly to the industry-wide productivity, but computer professionals have done a poor job of using the computer to do their job. Engineering disciplines and methodologies are now emerging supported by software tools that address the problems of software development. This paper addresses some of the current software engineering methodologies as a backdrop for the general evaluation of computer assisted software engineering (CASE) tools from actual installation of and experimentation with some specific tools.

Hygrothermal Numerical Simulation Tools Applied to Building Physics

CERN Document Server

Delgado, João M P Q; Ramos, Nuno M M; Freitas, Vasco Peixoto

2013-01-01

This book presents a critical review on the development and application of hygrothermal analysis methods to simulate the coupled transport processes of Heat, Air, and Moisture (HAM) transfer for one or multidimensional cases. During the past few decades there has been relevant development in this field of study and an increase in the professional use of tools that simulate some of the physical phenomena that are involved in Heat, Air and Moisture conditions in building components or elements. Although there is a significant amount of hygrothermal models referred in the literature, the vast majority of them are not easily available to the public outside the institutions where they were developed, which restricts the analysis of this book to only 14 hygrothermal modelling tools. The special features of this book are (a) a state-of-the-art of numerical simulation tools applied to building physics, (b) the boundary conditions importance, (c) the material properties, namely, experimental methods for the measuremen...

The development of GPS TroWav tool for atmospheric – terrestrial studies

International Nuclear Information System (INIS)

Suparta, W

2014-01-01

We have developed an efficient tool to process dual-frequency Global Positioning System (GPS) signals and the surface meteorological data, called the Tropospheric Water Vapor (TroWav) program. TroWav is a stand-alone program to compute atmospheric precipitable water vapor (PWV). The source of the program is developed using Matlab TM and the graphical user interface for the system was developed using a Visual Basic. The algorithms of the program capable to compute satellite elevation angle, Zenith Tropospheric Delay (ZTD), Zenith Hydrostatic Delay (ZHD), Zenith Wet Delay (ZWD) and mapping function. The tool is very practical and useful for sustainable atmospheric management.

Development of Application Programming Tool for Safety Grade PLC (POSAFE-Q)

International Nuclear Information System (INIS)

Koo, Kyungmo; You, Byungyong; Kim, Tae-Wook; Cho, Sengjae; Lee, Jin S.

2006-01-01

The pSET (POSAFE-Q Software Engineering Tool) is an application programming tool of the POSAFE-Q which is a safety graded programmable logic controller (PLC) developed for the reactor protect system of the nuclear power plant. The pSET provides an integrated development environment (IDE) which includes editors, compiler, simulator, down loader, debugger, and monitor. The pSET supports the IEC61131-3 standard software model and languages such as LD (ladder diagram) and FBD (function block diagram) which are two of the most widely used PLC programming languages in industry fields. The pSET will also support SFC (sequential function chart) language. The pSET is developed as a part of a Korea Nuclear Instrumentation and Control System (KNICS) project

A Reference Architecture for Providing Tools as a Service to Support Global Software Development

DEFF Research Database (Denmark)

Chauhan, Aufeef

2014-01-01

-computing paradigm for addressing above-mentioned issues by providing a framework to select appropriate tools as well as associated services and reference architecture of the cloud-enabled middleware platform that allows on demand provisioning of software engineering Tools as a Service (TaaS) with focus......Global Software Development (GSD) teams encounter challenges that are associated with distribution of software development activities across multiple geographic regions. The limited support for performing collaborative development and engineering activities and lack of sufficient support......-based solutions. The restricted ability of the organizations to have desired alignment of tools with software engineering and development processes results in administrative and managerial overhead that incur increased development cost and poor product quality. Moreover, stakeholders involved in the projects have...

The Tools Used by Science Teachers and Their Relevance to Objectives

Directory of Open Access Journals (Sweden)

Ulaş KUBAT

2018-01-01

Full Text Available The aim of this study is to reveal the views of science teachers on the use of tools in the learning-teaching process. Well-designed tools provide a rich learning environment. In this research qualitative research method was used. Semi-structured interview form was used as data collection tool. The working group consisted of 16 science teachers. According to the findings of the research, teachers use the most experimental materials as tools and teaching materials and 4 + 4 + 4 system creates problems for tools and materials. In addition, teachers have emphasized the problem of lack of material development. They indicated that well designed tools contribute to the achievement of objectives

Portfolio: a prototype workstation for development and evaluation of tools for analysis and management of digital portal images

International Nuclear Information System (INIS)

Boxwala, Aziz A.; Chaney, Edward L.; Fritsch, Daniel S.; Friedman, Charles P.; Rosenman, Julian G.

1998-01-01

Purpose: The purpose of this investigation was to design and implement a prototype physician workstation, called PortFolio, as a platform for developing and evaluating, by means of controlled observer studies, user interfaces and interactive tools for analyzing and managing digital portal images. The first observer study was designed to measure physician acceptance of workstation technology, as an alternative to a view box, for inspection and analysis of portal images for detection of treatment setup errors. Methods and Materials: The observer study was conducted in a controlled experimental setting to evaluate physician acceptance of the prototype workstation technology exemplified by PortFolio. PortFolio incorporates a windows user interface, a compact kit of carefully selected image analysis tools, and an object-oriented data base infrastructure. The kit evaluated in the observer study included tools for contrast enhancement, registration, and multimodal image visualization. Acceptance was measured in the context of performing portal image analysis in a structured protocol designed to simulate clinical practice. The acceptability and usage patterns were measured from semistructured questionnaires and logs of user interactions. Results: Radiation oncologists, the subjects for this study, perceived the tools in PortFolio to be acceptable clinical aids. Concerns were expressed regarding user efficiency, particularly with respect to the image registration tools. Conclusions: The results of our observer study indicate that workstation technology is acceptable to radiation oncologists as an alternative to a view box for clinical detection of setup errors from digital portal images. Improvements in implementation, including more tools and a greater degree of automation in the image analysis tasks, are needed to make PortFolio more clinically practical

The development of an online decision support tool for organizational readiness for change.

Science.gov (United States)

Khan, Sobia; Timmings, Caitlyn; Moore, Julia E; Marquez, Christine; Pyka, Kasha; Gheihman, Galina; Straus, Sharon E

2014-05-10

Much importance has been placed on assessing readiness for change as one of the earliest steps of implementation, but measuring it can be a complex and daunting task. Organizations and individuals struggle with how to reliably and accurately measure readiness for change. Several measures have been developed to help organizations assess readiness, but these are often underused due to the difficulty of selecting the right measure. In response to this challenge, we will develop and test a prototype of a decision support tool that is designed to guide individuals interested in implementation in the selection of an appropriate readiness assessment measure for their setting. A multi-phase approach will be used to develop the decision support tool. First, we will identify key measures for assessing organizational readiness for change from a recently completed systematic review. Included measures will be those developed for healthcare settings (e.g., acute care, public health, mental health) and that have been deemed valid and reliable. Second, study investigators and field experts will engage in a mapping exercise to categorize individual items of included measures according to key readiness constructs from an existing framework. Third, a stakeholder panel will be recruited and consulted to determine the feasibility and relevance of the selected measures using a modified Delphi process. Fourth, findings from the mapping exercise and stakeholder consultation will inform the development of a decision support tool that will guide users in appropriately selecting change readiness measures. Fifth, the tool will undergo usability testing. Our proposed decision support tool will address current challenges in the field of organizational change readiness by aiding individuals in selecting a valid and reliable assessment measure that is relevant to user needs and practice settings. We anticipate that implementers and researchers who use our tool will be more likely to conduct

A modeling tool to support decision making in future hydropower development in Chile

Science.gov (United States)

Vicuna, S.; Hermansen, C.; Cerda, J. P.; Olivares, M. A.; Gomez, T. I.; Toha, E.; Poblete, D.; Mao, L.; Falvey, M. J.; Pliscoff, P.; Melo, O.; Lacy, S.; Peredo, M.; Marquet, P. A.; Maturana, J.; Gironas, J. A.

2017-12-01

Modeling tools support planning by providing transparent means to assess the outcome of natural resources management alternatives within technical frameworks in the presence of conflicting objectives. Such tools, when employed to model different scenarios, complement discussion in a policy-making context. Examples of practical use of this type of tool exist, such as the Canadian public forest management, but are not common, especially in the context of developing countries. We present a tool to support the selection from a portfolio of potential future hydropower projects in Chile. This tool, developed by a large team of researchers under the guidance of the Chilean Energy Ministry, is especially relevant in the context of evident regionalism, skepticism and change in societal values in a country that has achieved a sustained growth alongside increased demands from society. The tool operates at a scale of a river reach, between 1-5 km long, on a domain that can be defined according to the scale needs of the related discussion, and its application can vary from river basins to regions or other spatial configurations that may be of interest. The tool addresses both available hydropower potential and the existence (inferred or observed) of other ecological, social, cultural and productive characteristics of the territory which are valuable to society, and provides a means to evaluate their interaction. The occurrence of each of these other valuable characteristics in the territory is measured by generating a presence-density score for each. Considering the level of constraint each characteristic imposes on hydropower development, they are weighted against each other and an aggregate score is computed. With this information, optimal trade-offs are computed between additional hydropower capacity and valuable local characteristics over the entire domain, using the classical knapsack 0-1 optimization algorithm. Various scenarios of different weightings and hydropower

Using intervention mapping to develop a work-related guidance tool for those affected by cancer

Directory of Open Access Journals (Sweden)

Munir Fehmidah

2013-01-01

Full Text Available Abstract Background Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP. Methods The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the ‘gaps’ in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. Results The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Conclusions Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health

Using intervention mapping to develop a work-related guidance tool for those affected by cancer.

Science.gov (United States)

Munir, Fehmidah; Kalawsky, Katryna; Wallis, Deborah J; Donaldson-Feilder, Emma

2013-01-05

Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP). The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the 'gaps' in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health-care based.

Software tool for representation and processing of experimental data on high energy interactions of elementary particles

International Nuclear Information System (INIS)

Cherepanov, E.O.; Skachkov, N.B.

2002-01-01

The software tool is developed for detailed and evident displaying of information about energy and space distribution of secondary particles produced in the processes of elementary particles collisions. As input information the data on the components of 4-momenta of secondary particles is used. As for these data the information obtained from different parts of physical detector (for example, from the calorimeter or tracker) as well as the information obtained with the help of event generator is taken. The tool is intended for use in Windows operation system and is developed on the basis of Borland Delphi. Mathematical architecture of the software tool allows user to receive complete information without making additional calculations. The program automatically performs analysis of structure and distributions of signals and displays the results in a transparent form which allows their quick analysis. To display the information the three-dimensional graphic methods as well as colour decisions based on intuitive associations are also used. (author)

On developing a prospecting tool for wind industry and policy decision support

International Nuclear Information System (INIS)

McKeown, Charles; Adelaja, Adesoji; Calnin, Benjamin

2011-01-01

This paper presents the rudiments of a Wind Prospecting Tool designed to inform private and public decision makers involved in wind industry development in reducing transaction costs associated with identifying areas of mutual focus within a state. The multiple layer decision support framework has proven to be valuable to industry, state government and local decision makers. Information on wind resources, land availability, potential land costs, potential NIMBYism concerns and economic development potential were integrated to develop a framework for decision support. The paper also highlights implications for decision support research and the role of higher education in providing anticipatory science to enhance private and public choices in economic development. - Research Highlights: →In this paper we explore the building and value of a wind industry location decision support tool. →We examine the development process from the industry perspective. →We discuss the creation of a decision support tool that was designed for industry, state policy makers and local decision makers. →We build a model framework for wind prospecting decision support. →Finally we discuss the impact on local and state decision making as a result of being informed by science based decision support.

The Human Factor: Training and Professional Development as a Policy Tool

Directory of Open Access Journals (Sweden)

Lucian CIOLAN

2014-11-01

Full Text Available In this paper, we try to make a case for the risky approach of many decision-makers and pol- icy specialists to overuse authority and regula- tion-based tools, while neglecting the ones more focused on human capacity and persuasion. Especially in fields like education, we consider that the human factor should be at the core of any policy mix, and a tool like training and pro- fessional development should gain a more visible and persistent role in policy interventions. Firstly, we try to analyze the distribution of policy tools on the authority-complexity axes. The value we see in the mapping of policy tools is that it can be used for investigating and positioning the activity of a specific governing body or central gover- nance. Thus, a fundamental question remains as to what really influences the choice of policy tools or instruments, as a basis for better understand- ing the rationales behind a specific policy mix. We argue that policy failure could be ex- plained in many cases by the incapacity to ad- dress in a consistent and professional way the human capacities needed for implementation. Thus, training and professional development are, at least, poorly used from the perspective of the potential they have. As an argument, we tried to look at training and professional development in the specific area of teachers in pre-university education in Romania, situating it in the broader context of European policies in lifelong learning and participation of adults in continuing educa- tion and training, but also in the local policy en- vironment. The results of the research led us to the conclusion that educational policies should be among the first in the broader spectrum of public policies valuing and emphasizing learning, through training and professional development of the stakeholders involved in policy change together with adding more value to the Human Factor in educational policies. 

Formal Development of a Tool for Automated Modelling and Verification of Relay Interlocking Systems

DEFF Research Database (Denmark)

Haxthausen, Anne Elisabeth; Kjær, Andreas A.; Le Bliguet, Marie

2011-01-01

This paper describes a tool for formal modelling relay interlocking systems and explains how it has been stepwise, formally developed using the RAISE method. The developed tool takes the circuit diagrams of a relay interlocking system as input and gives as result a state transition system modelling...

Development of computer-based analytical tool for assessing physical protection system

Energy Technology Data Exchange (ETDEWEB)

Mardhi, Alim, E-mail: alim-m@batan.go.id [National Nuclear Energy Agency Indonesia, (BATAN), PUSPIPTEK area, Building 80, Serpong, Tangerang Selatan, Banten (Indonesia); Chulalongkorn University, Faculty of Engineering, Nuclear Engineering Department, 254 Phayathai Road, Pathumwan, Bangkok Thailand. 10330 (Thailand); Pengvanich, Phongphaeth, E-mail: ppengvan@gmail.com [Chulalongkorn University, Faculty of Engineering, Nuclear Engineering Department, 254 Phayathai Road, Pathumwan, Bangkok Thailand. 10330 (Thailand)

2016-01-22

Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer–based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system’s detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure.

Development of computer-based analytical tool for assessing physical protection system

International Nuclear Information System (INIS)

Mardhi, Alim; Pengvanich, Phongphaeth

2016-01-01

Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer–based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system’s detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure

Development of computer-based analytical tool for assessing physical protection system

Science.gov (United States)

Mardhi, Alim; Pengvanich, Phongphaeth

2016-01-01

Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer-based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system's detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure.

Auditing Albaha University Network Security using in-house Developed Penetration Tool

Science.gov (United States)

Alzahrani, M. E.

2018-03-01

Network security becomes very important aspect in any enterprise/organization computer network. If important information of the organization can be accessed by anyone it may be used against the organization for further own interest. Thus, network security comes into it roles. One of important aspect of security management is security audit. Security performance of Albaha university network is relatively low (in term of the total controls outlined in the ISO 27002 security control framework). This paper proposes network security audit tool to address issues in Albaha University network. The proposed penetration tool uses Nessus and Metasploit tool to find out the vulnerability of a site. A regular self-audit using inhouse developed tool will increase the overall security and performance of Albaha university network. Important results of the penetration test are discussed.

Psychometric properties of a Mental Health Team Development Audit Tool.

LENUS (Irish Health Repository)

Roncalli, Silvia

2013-02-01

To assist in improving team working in Community Mental Health Teams (CMHTs), the Mental Health Commission formulated a user-friendly but yet-to-be validated 25-item Mental Health Team Development Audit Tool (MHDAT).

The reliability analysis of cutting tools in the HSM processes

OpenAIRE

W.S. Lin

2008-01-01

Purpose: This article mainly describe the reliability of the cutting tools in the high speed turning by normaldistribution model.Design/methodology/approach: A series of experimental tests have been done to evaluate the reliabilityvariation of the cutting tools. From experimental results, the tool wear distribution and the tool life are determined,and the tool life distribution and the reliability function of cutting tools are derived. Further, the reliability ofcutting tools at anytime for h...

Developing Web-based Tools for Collaborative Science and Public Outreach

Science.gov (United States)

Friedman, A.; Pizarro, O.; Williams, S. B.

2016-02-01

With the advances in high bandwidth communications and the proliferation of social media tools, education & outreach activities have become commonplace on ocean-bound research cruises. In parallel, advances in underwater robotics & other data collecting platforms, have made it possible to collect copious amounts of oceanographic data. This data then typically undergoes laborious, manual processing to transform it into quantitative information, which normally occurs post cruise resulting in significant lags between collecting data and using it for scientific discovery. This presentation discusses how appropriately designed software systems, can be used to fulfill multiple objectives and attempt to leverage public engagement in order to compliment science goals. We will present two software platforms: the first is a web browser based tool that was developed for real-time tracking of multiple underwater robots and ships. It was designed to allow anyone on board to view or control it on any device with a web browser. It opens up the possibility of remote teleoperation & engagement and was easily adapted to enable live streaming over the internet for public outreach. While the tracking system provided context and engaged people in real-time, it also directed interested participants to Squidle, another online system. Developed for scientists, Squidle supports data management, exploration & analysis and enables direct access to survey data reducing the lag in data processing. It provides a user-friendly streamlined interface that integrates advanced data management & online annotation tools. This system was adapted to provide a simplified user interface, tutorial instructions and a gamified ranking system to encourage "citizen science" participation. These examples show that through a flexible design approach, it is possible to leverage the development effort of creating science tools to facilitate outreach goals, opening up the possibility for acquiring large volumes of

Development of a prenatal psychosocial screening tool for post-partum depression and anxiety.

Science.gov (United States)

McDonald, Sheila; Wall, Jennifer; Forbes, Kaitlin; Kingston, Dawn; Kehler, Heather; Vekved, Monica; Tough, Suzanne

2012-07-01

Post-partum depression (PPD) is the most common complication of pregnancy in developed countries, affecting 10-15% of new mothers. There has been a shift in thinking less in terms of PPD per se to a broader consideration of poor mental health, including anxiety after giving birth. Some risk factors for poor mental health in the post-partum period can be identified prenatally; however prenatal screening tools developed to date have had poor sensitivity and specificity. The objective of this study was to develop a screening tool that identifies women at risk of distress, operationalized by elevated symptoms of depression and anxiety in the post-partum period using information collected in the prenatal period. Using data from the All Our Babies Study, a prospective cohort study of pregnant women living in Calgary, Alberta (N = 1578), we developed an integer score-based prediction rule for the prevalence of PPD, as defined as scoring 10 or higher on the Edinburgh Postnatal Depression Scale (EPDS) at 4-months postpartum. The best fit model included known risk factors for PPD: depression and stress in late pregnancy, history of abuse, and poor relationship quality with partner. Comparison of the screening tool with the EPDS in late pregnancy showed that our tool had significantly better performance for sensitivity. Further validation of our tool was seen in its utility for identifying elevated symptoms of postpartum anxiety. This research heeds the call for further development and validation work using psychosocial factors identified prenatally for identifying poor mental health in the post-partum period. © 2012 Blackwell Publishing Ltd.

Cross-cultural education in U.S. medical schools: development of an assessment tool.

Science.gov (United States)

Peña Dolhun, Eduardo; Muñoz, Claudia; Grumbach, Kevin

2003-06-01

Medical education is responding to an increasingly diverse population and to regulatory and quality-of-care requirements by developing cross-cultural curricula in health care. This undertaking has proved problematic because there is no consensus on what elements of cross-cultural medicine should be taught. Further, less is known about what is being taught. This study hypothesized that a tool could be developed to assess common themes, concepts, learning objectives, and methods in cross-cultural education. In 2001, 31 U.S. medical schools were invited to provide the researchers all written and/or Web-based materials related to implementing cross-cultural competency in their curricula. A tool was developed to measure teaching methods, skill sets, and eight content areas in cross-cultural education. A total of 19 medical schools supplied their curricular materials. There was considerable variation in approaches to teaching and in the content of cross-cultural education across the schools. Most emphasized teaching general themes, such as the doctor-patient relationship, socioeconomic status, and racism. Most also focused on specific cultural information about the ethnic communities they served. Few schools extensively addressed health care access and language issues. This assessment tool is an important step toward developing a standard nomenclature for measuring the success of cross-cultural education curricula. On the national level, the tool can be used to compare program components and encourage the exchange of effective teaching tools by promoting a common language, which will be essential for developing and implementing curricula, for comparing programs, and evaluating their effects on quality of care.

DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR THE SAVANNAH RIVER SITE'S DEFENSE WASTE PROCESSING FACILITY

International Nuclear Information System (INIS)

Krementz, D

2007-01-01

The Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) requested development of tooling for remote replacement of gaskets in mechanical Hanford connectors. The facility has compressed air supply, two master-slave manipulators (MSM's) and a lightweight robotic arm for operation of the remote tools. The Savannah River National Laboratory (SRNL) developed and tested multiple tools to perform the gasket replacement tasks. Separate pneumatic snap-ring removal tools that use the connector skirt as a reaction surface were developed for removal of the snap ring and spent gasket on both vertical and horizontal Hanford connectors. A pneumatic tool that clamps and centers on the jumper pipe ID was developed to simultaneously install the new gasket and snap ring. A pneumatic snap-ring-loading tool was developed that compresses the snap ring and places it in a groove in the installation tool. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and vents the tools as needed. The entire system has been successfully tested using MSM's to manipulate the various tools. Deployment of the entire system is expected during FY08. The Hanford connector gasket replacement tooling has been successfully tested using MSM's to manipulate the various tools. Nitric acid is used in many of the decontamination processes performed in the REDC, where the tooling will be deployed. Although most of the tool components were fabricated/purchased with nitric acid and radioactive service in mind, some of the prototype parts must be replaced with parts that are more compatible with nitric acid/radioactive service. Several modifications to the various tools are needed to facilitate maintenance and replacement of failed components. Development of installation tools for replacement of 1-inch, 2-inch and multi-hole gaskets is being considered. Deployment of the existing system in the DWPF REDC is expected during FY

Development of road infrastructure as a tool of transforming Ibiono ...

African Journals Online (AJOL)

Global Journal of Social Sciences ... Development of road infrastructure as a tool of transforming Ibiono Ibom local government area. V Umoren ... The improvement of transportation network in the rural area in this regard becomes imperative.

Bioinformatics tools for development of fast and cost effective simple ...

African Journals Online (AJOL)

Bioinformatics tools for development of fast and cost effective simple sequence repeat ... comparative mapping and exploration of functional genetic diversity in the ... Already, a number of computer programs have been implemented that aim at ...

Development and evaluation of a patient-centred measurement tool for surgeons' non-technical skills.

Science.gov (United States)

Yule, J; Hill, K; Yule, S

2018-06-01

Non-technical skills are essential for safe and effective surgery. Several tools to assess surgeons' non-technical skills from the clinician's perspective have been developed. However, a reliable measurement tool using a patient-centred approach does not currently exist. The aim of this study was to translate the existing Non-Technical Skills for Surgeons (NOTSS) tool into a patient-centred evaluation tool. Data were gathered from four cohorts of patients using an iterative four-stage mixed-methods research design. Exploratory and confirmatory factor analyses were performed to establish the psychometric properties of the tool, focusing on validity, reliability, usability and parsimony. Some 534 patients were recruited to the study. A total of 24 patient-centred non-technical skill items were developed in stage 1, and reduced to nine items in stage 2 using exploratory factor analysis. In stage 3, confirmatory factor analysis demonstrated that these nine items each loaded on to one of three factors, with excellent internal consistency: decision-making, leadership, and communication and teamwork. In stage 4, validity testing established that the new tool was independent of physician empathy and predictive of surgical quality. Surgical leadership emerged as the most dominant skill that patients could recognize and evaluate. A novel nine-item assessment tool has been developed. The Patients' Evaluation of Non-Technical Skills (PENTS) tool allows valid and reliable measurement of surgeons' non-technical skills from the patient perspective. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Developing an SSAC Self-Assessment Tool for Operators and Regulators

Energy Technology Data Exchange (ETDEWEB)

Frazar, Sarah L.; Innes-Jones, Gemma; Hamilton, Ian

2017-07-17

Enabling an SSAC to understand why it is performing inefficiently can help it allocate resources more effectively to better support IAEA safeguards implementation. In collaboration with international consulting firm, Environmental Resources Management (ERM) and a U.S. based nuclear fuel cycle facility, the Pacific Northwest National Laboratory (PNNL) has been developing a framework for a future self-assessment tool for nuclear operators and regulators. This paper will describe the effort to date, with particular emphasis on the steps the team took to align the framework with relevant IAEA self-assessment tools.

Experimental econophysics properties and mechanisms of laboratory markets

CERN Document Server

Huang, Ji-Ping

2015-01-01

Experimental Econophysics describes the method of controlled human experiments, which is developed by physicists to study some problems in economics or finance, namely, stylized facts, fluctuation phenomena, herd behavior, contrarian behavior, hedge behavior, cooperation, business cycles, partial information, risk management, and stock prediction. Experimental econophysics together with empirical econophysics are two branches of the field of econophysics. The latter one has been extensively discussed in the existing books, while the former one has been seldom touched. In this book, the author will focus on the branch of experimental econophysics. Empirical econophysics is based on the analysis of data in real markets by using some statistical tools borrowed from traditional statistical physics. Differently, inspired by the role of controlled experiments and system modelling (for computer simulations and/or analytical theory) in developing modern physics, experimental econophysics specially relies on controlle...

Development and Validation of a Family Meeting Assessment Tool (FMAT).

Science.gov (United States)

Hagiwara, Yuya; Healy, Jennifer; Lee, Shuko; Ross, Jeanette; Fischer, Dixie; Sanchez-Reilly, Sandra

2018-01-01

A cornerstone procedure in Palliative Medicine is to perform family meetings. Learning how to lead a family meeting is an important skill for physicians and others who care for patients with serious illnesses and their families. There is limited evidence on how to assess best practice behaviors during end-of-life family meetings. Our aim was to develop and validate an observational tool to assess trainees' ability to lead a simulated end-of-life family meeting. Building on evidence from published studies and accrediting agency guidelines, an expert panel at our institution developed the Family Meeting Assessment Tool. All fourth-year medical students (MS4) and eight geriatric and palliative medicine fellows (GPFs) were invited to participate in a Family Meeting Objective Structured Clinical Examination, where each trainee assumed the physician role leading a complex family meeting. Two evaluators observed and rated randomly chosen students' performances using the Family Meeting Assessment Tool during the examination. Inter-rater reliability was measured using percent agreement. Internal consistency was measured using Cronbach α. A total of 141 trainees (MS4 = 133 and GPF = 8) and 26 interdisciplinary evaluators participated in the study. Internal reliability (Cronbach α) of the tool was 0.85. Number of trainees rated by two evaluators was 210 (MS4 = 202 and GPF = 8). Rater agreement was 84%. Composite scores, on average, were significantly higher for fellows than for medical students (P < 0.001). Expert-based content, high inter-rater reliability, good internal consistency, and ability to predict educational level provided initial evidence for construct validity for this novel assessment tool. Copyright © 2017 American Academy of Hospice and Palliative Medicine. All rights reserved.

Capturing Communication Supporting Classrooms: The Development of a Tool and Feasibility Study

Science.gov (United States)

Dockrell, Julie E.; Bakopoulou, Ioanna; Law, James; Spencer, Sarah; Lindsay, Geoff

2015-01-01

There is an increasing emphasis on supporting the oral language needs of children in the classroom. A variety of different measures have been developed to assist this process but few have been derived systematically from the available research evidence. A Communication Supporting Classrooms Observation Tool (CsC Observation Tool) for children aged…

Developing an Intelligent Diagnosis and Assessment E-Learning Tool for Introductory Programming

Science.gov (United States)

Huang, Chenn-Jung; Chen, Chun-Hua; Luo, Yun-Cheng; Chen, Hong-Xin; Chuang, Yi-Ta

2008-01-01

Recently, a lot of open source e-learning platforms have been offered for free in the Internet. We thus incorporate the intelligent diagnosis and assessment tool into an open software e-learning platform developed for programming language courses, wherein the proposed learning diagnosis assessment tools based on text mining and machine learning…

Development of Cognitive Bias Modification (CBM) Tools to Promote Adjustment during Reintegration following Deployment

Science.gov (United States)

2017-06-01

a meta-analysis. Child development 73 (3), 916-934. Owen, J.M., 2011. Transdiagnostic cognitive processes in high trait anger. Clinical Psychology ...Award Number: W81XWH-13-2-0001 TITLE: : Development of Cognitive Bias Modification (CBM) Tools to Promote Adjustment during Reintegration...DATES COVERED 15-OCT-2012 TO 14-OCT-2016 4. TITLE AND SUBTITLE Development of Cognitive Bias Modification (CBM) Tools to Promote Adjustment during

Development of a music therapy assessment tool for patients in low awareness states.

Science.gov (United States)

Magee, Wendy L

2007-01-01

People in low awareness states following profound brain injury typically demonstrate subtle changes in functional behaviors which challenge the sensitivity of measurement tools. Failure to identify and measure changes in functioning can lead to misdiagnosis and withdrawal of treatment with this population. Thus, the development of tools which are sensitive to responsiveness is of central concern. As the auditory modality has been found to be particularly sensitive in identifying responses indicating awareness, a convincing case can be made for music therapy as a treatment medium. However, little has been recommended about protocols for intervention or tools for measuring patient responses within the music therapy setting. This paper presents the rationale for an assessment tool specifically designed to measure responses in the music therapy setting with patients who are diagnosed as minimally conscious or in a vegetative state. Developed over fourteen years as part of interdisciplinary assessment and treatment, the music therapy assessment tool for low awareness states (MATLAS) contains fourteen items which rate behavioral responses across a number of domains. The tool can provide important information for interdisciplinary assessment and treatment particularly in the auditory and communication domains. Recommendations are made for testing its reliability and validity through research.

Data Assimilation Tools for CO2 Reservoir Model Development – A Review of Key Data Types, Analyses, and Selected Software

Energy Technology Data Exchange (ETDEWEB)

Rockhold, Mark L.; Sullivan, E. C.; Murray, Christopher J.; Last, George V.; Black, Gary D.

2009-09-30

Pacific Northwest National Laboratory (PNNL) has embarked on an initiative to develop world-class capabilities for performing experimental and computational analyses associated with geologic sequestration of carbon dioxide. The ultimate goal of this initiative is to provide science-based solutions for helping to mitigate the adverse effects of greenhouse gas emissions. This Laboratory-Directed Research and Development (LDRD) initiative currently has two primary focus areas—advanced experimental methods and computational analysis. The experimental methods focus area involves the development of new experimental capabilities, supported in part by the U.S. Department of Energy’s (DOE) Environmental Molecular Science Laboratory (EMSL) housed at PNNL, for quantifying mineral reaction kinetics with CO2 under high temperature and pressure (supercritical) conditions. The computational analysis focus area involves numerical simulation of coupled, multi-scale processes associated with CO2 sequestration in geologic media, and the development of software to facilitate building and parameterizing conceptual and numerical models of subsurface reservoirs that represent geologic repositories for injected CO2. This report describes work in support of the computational analysis focus area. The computational analysis focus area currently consists of several collaborative research projects. These are all geared towards the development and application of conceptual and numerical models for geologic sequestration of CO2. The software being developed for this focus area is referred to as the Geologic Sequestration Software Suite or GS3. A wiki-based software framework is being developed to support GS3. This report summarizes work performed in FY09 on one of the LDRD projects in the computational analysis focus area. The title of this project is Data Assimilation Tools for CO2 Reservoir Model Development. Some key objectives of this project in FY09 were to assess the current state

Smart grid development and households in experimental projects

DEFF Research Database (Denmark)