Road Lane Detection by Discriminating Dashed and Solid Road Lanes Using a Visible Light Camera Sensor

Directory of Open Access Journals (Sweden)

Toan Minh Hoang

2016-08-01

Full Text Available With the increasing need for road lane detection used in lane departure warning systems and autonomous vehicles, many studies have been conducted to turn road lane detection into a virtual assistant to improve driving safety and reduce car accidents. Most of the previous research approaches detect the central line of a road lane and not the accurate left and right boundaries of the lane. In addition, they do not discriminate between dashed and solid lanes when detecting the road lanes. However, this discrimination is necessary for the safety of autonomous vehicles and the safety of vehicles driven by human drivers. To overcome these problems, we propose a method for road lane detection that distinguishes between dashed and solid lanes. Experimental results with the Caltech open database showed that our method outperforms conventional methods.

A case study of intelligent compaction used in road upgrades

CSIR Research Space (South Africa)

Leyland, R

2014-08-01

Full Text Available to traditional testing methods. In a field study numerous different IC systems where used during construction of a number of experimental road sections in South Africa. These sections formed part of a road upgrade project typical of most road construction...

The Relationship between Road Design and Driving Behavior

DEFF Research Database (Denmark)

Abele, Liva; Møller, Mette

2011-01-01

Speed is a substantial factor contributing to road safety. Currently, speed reduction is mainly achieved through law enforcement and the implementation of traffic calming measures. An alternative speed reducing approach is to encourage drivers to voluntarily choose an appropriate driving speed....... Improving road infrastructure safety can be achieved by making roads forgiving and self-explaining. This could be done by clarifying the road design characteristics for each road category. The effect on driver behavior by varying road-shoulders and presence of roadside trees was tested by means of a fixed-driving...... simulator experiment. Speed and lateral position were used as performance indicators. The results indicated that shoulders might not be applied to decrease the speed on the experimental road stretch, but their presence cause drivers to drive closer to the road edge, hence eliminating the probability of head...

Grip Analysis of Road Surface and Tire Footprint Using FEM

Science.gov (United States)

Sabri, M.; Abda, S.

2018-02-01

Road grip involve a touch between road pavement and the tire tread pattern. The load bearing surface, which depends on pavement roughness and local pressures in the contact patch. This research conducted to develop a Finite element model for simulating the experimentally testing of asphalt in Jl. AH Nasution Medan, North Sumatera Indonesia base on the value of grip coefficient from various tire loads and the various speed of the vehicle during contact to the road. A tire model and road pavement are developed for the analyses the geometry of tire footprint. The results showed that the greater the mass of car will increase grip coefficient. The coefficient of grip on the road surface contact trough the tire footprint strongly influence the kinetic coefficient of friction at certain speeds. Experimentally show that Concrete road grip coefficient of more than 34% compared to the asphalt road at the same IRI parameters (6-8). Kinetic friction coefficient more than 0.33 was obtained in a asphalt path at a speed of 30-40 Km/hour.

THE IMPACT OF ROAD CONDITIONS ON THE SUSTAINABILITY DECLINE IN THE ROAD TRANSPORT IN THE REPUBLIC OF DAGESTAN

Directory of Open Access Journals (Sweden)

E. S. Batmanov

2016-01-01

Full Text Available The article touches upon the theoretical and experimental studies of the influence of the various components of road conditions to reduce the stability of the vehicle, which lead to skidding and rollover. The resulting research material will improve traffic safety on the roads of the Republic of Dagestan. We give formulas for calculating the critical speed cornering with cross gradients and sharp change in direction, in which the skid and rollover is not excluded, due to the appearance of additional transverse forces of inertia. It is explained that a significant impact on the stability of the car has a «side pull». We give graphs of the lateral force from the vehicle slip angle of tires and tire tread wear of the impact on the quality of grip at different speeds and the amount of coating roughness obtained experimentally. Effect on the skid and rollover car road surface irregularities is marked. In such traffic conditions, the technical condition of the vehicle and in particular the shock absorbers are essential. The schedule damper effect on driving conditions, obtained experimentally.

An Efficient Framework for Road Sign Detection and Recognition

Directory of Open Access Journals (Sweden)

Duanling Li

2014-02-01

Full Text Available Road sign detection and recognition is a significant and challenging issue not only for assisting drivers but also navigating mobile robots. In this paper, we propose a novel and fast approach for the automatic detection and recognition of road signs. First, we use Hue Saturation Intensity (HSI color space to segment the road signs color. And then we locate the road signs based on the geometry symmetry, as almost all the shapes of road sign shapes are symmetrical such circle, rectangle, triangle and octagon. The proposed shape feature is further applied to classify the shape initially. Finally, the road signs are exactly recognized by support vector machine (SVM classifiers. We test our proposed method on real road images and the experimental results show that it can detect and recognize road signs rapidly and accurately.

An experimental study of the Online Information Paradox: Does en-route information improve road network performance?

Science.gov (United States)

Wijayaratna, Kasun P; Dixit, Vinayak V; Denant-Boemont, Laurent; Waller, S Travis

2017-01-01

This study investigates the empirical presence of a theoretical transportation paradox, defined as the "Online Information Paradox" (OIP). The paradox suggests that, for certain road networks, the provision of online information deteriorate travel conditions for all users of that network relative to the situation where no online information is provided to users. The analytical presence of the paradox was derived for a specific network structure by using two equilibrium models, the first being the Expected User Equilibrium (EUE) solution (no information scenario) and the other being the User Equilibrium with Recourse (UER) solution (with information scenario). An incentivised computerised route choice game was designed using the concepts of experimental economics and administered in a controlled laboratory environment to investigate the physical presence of the paradox. Aggregate statistics of path flows and Total System Travel Costs (TSTC) were used to compare the experimental results with the theoretical findings. A total of 12 groups of 12 participants completed the experiment and the OIP and the occurrence of the OIP being significant was observed in 11 of the 12 cases. Though information increased travel costs for users on average, it reduced the volatility of travel costs experienced in the no information scenario indicating that information can achieve a more reliable system. Further replications of similar experiments and more importantly field based identification of the phenomena will force transport professionals to be aware of the emergence of the paradox. In addition, studies such as this emphasise the need for the adoption of adaptive traffic assignment techniques to appropriately model the acquisition of information on a road network.

Experimental use of road header (AM-50) as face cutting machine for extraction of coal in longwall panel

Energy Technology Data Exchange (ETDEWEB)

Passi, K.K.; Kumar, C.R.; Prasad, P. [DGMS, Dhanbad (India)

2001-07-01

The scope of this paper has been limited to the use of available machines and techniques for attaining higher and more efficient production in underground coal mines. Under certain conditions of strata and higher degree of gassiness, the longwall method with hydraulic sand stowing is the only appropriate method of work for extraction of thick seam. In Moonidih Jitpur Colliery of M/S IISCO, No. 14 seam, Degree III gassy seam, 9.07 m thick, is extracted in multilift system with hydraulic sand stowing. In general, the bottom lift is extracted by Single Ended Ranging Arm Shearer and the middle and top lift are extracted by conventional method. However, in one of the panels spare road header machine was used as face cutting machine in bottom lift, on an experimental basis. This paper presents a successful case study of extraction of bottom lift coal by the longwall method with hydraulic sand stowing using road header (AM 50) as the face cutting machines. 9 figs.

Using Crumb Rubber from Waste Tires to Reduce Road Traffic Noise

Directory of Open Access Journals (Sweden)

Frolova Olga

2016-01-01

Full Text Available The results of measurements of sound pressure levels on an experimental road section (road pavement with addition of crumb rubber from waste tires in Mala Ida village (Kosice region, Slovakia and on a road with stone mastic asphalt in Haniska village (Presov region, Slovakia are presented in the paper. The results obtained using statistical pass-by methods were compared and they confirmed that road surface with addition of crumb rubber from waste tires produced quieter pavement than stone mastic asphalt road pavement alone.

Classification of Steps on Road Surface Using Acceleration Signals

Directory of Open Access Journals (Sweden)

Junji Takahashi

2015-12-01

Full Text Available In order to reduce a road monitoring cost, we propose a system to monitor extensively road condition by cyclists with a smartphone. In this paper, we propose two methods towards road monitoring. First is to classify road signals to four road conditions. Second is to extract road signal from a smartphone's accelerometer in three positions: pants' side pocket, chest pocket and a bag in a front basket. In pants' side pocket, road signal is extracted by Independent Component Analysis. In chest pocket and bag in a front basket, road signal is extracted by selecting 1-axis affected from gravitational acceleration. In the experiment of the classification method, overall accuracy was 75%. The experimental results of the extraction methods with correlation coefficient showed the overall accuracy were more than 0.7 in pants' side pocket and chest pocket, the overall accuracy was less than 0.3 in bag in a front basket.

The road safety audit and road safety inspection.

NARCIS (Netherlands)

2007-01-01

A road safety audit (RSA) and a road safety inspection (RSI) are used to test the safety level of the road infrastructure. The RSA tests the design of new roads or the reconstruction of existing roads, whereas the RSI is used for testing existing roads. An RSA, therefore, aims to 'improve' the road

Distributed Road Grade Estimation for Heavy Duty Vehicles

Energy Technology Data Exchange (ETDEWEB)

Sahlholm, Per

2011-07-01

An increasing need for goods and passenger transportation drives continued worldwide growth in traffic. As traffic increases environmental concerns, traffic safety, and cost efficiency become ever more important. Advancements in microelectronics open the possibility to address these issues through new advanced driver assistance systems. Applications such as predictive cruise control, automated gearbox control, predictive front lighting control, and hybrid vehicle state-of-charge control decrease the energy consumption of vehicles and increase the safety. These control systems can benefit significantly from preview road grade information. This information is currently obtained using specialized survey vehicles, and is not widely available. This thesis proposes new methods to obtain road grade information using on-board sensors. The task of creating road grade maps is addressed by the proposal of a framework where vehicles using a road network collect the necessary data for estimating the road grade. The estimation can then be carried out locally in the vehicle, or in the presence of a communication link to the infrastructure, centrally. In either case the accuracy of the map increases over time, and costly road surveys can be avoided. This thesis presents a new distributed method for creating accurate road grade maps for vehicle control applications. Standard heavy duty vehicles in normal operation are used to collect measurements. Estimates from multiple passes along a road segment are merged to form a road grade map, which improves each time a vehicle retraces a route. The design and implementation of the road grade estimator are described, and the performance is experimentally evaluated using real vehicles. Three different grade estimation methods, based on different assumption on the road grade signal, are proposed and compared. They all use data from sensors that are standard equipment in heavy duty vehicles. Measurements of the vehicle speed and the engine

Vision Sensor-Based Road Detection for Field Robot Navigation

Directory of Open Access Journals (Sweden)

Keyu Lu

2015-11-01

Full Text Available Road detection is an essential component of field robot navigation systems. Vision sensors play an important role in road detection for their great potential in environmental perception. In this paper, we propose a hierarchical vision sensor-based method for robust road detection in challenging road scenes. More specifically, for a given road image captured by an on-board vision sensor, we introduce a multiple population genetic algorithm (MPGA-based approach for efficient road vanishing point detection. Superpixel-level seeds are then selected in an unsupervised way using a clustering strategy. Then, according to the GrowCut framework, the seeds proliferate and iteratively try to occupy their neighbors. After convergence, the initial road segment is obtained. Finally, in order to achieve a globally-consistent road segment, the initial road segment is refined using the conditional random field (CRF framework, which integrates high-level information into road detection. We perform several experiments to evaluate the common performance, scale sensitivity and noise sensitivity of the proposed method. The experimental results demonstrate that the proposed method exhibits high robustness compared to the state of the art.

An experimental study of the Online Information Paradox: Does en-route information improve road network performance?

Directory of Open Access Journals (Sweden)

Kasun P Wijayaratna

Full Text Available This study investigates the empirical presence of a theoretical transportation paradox, defined as the "Online Information Paradox" (OIP. The paradox suggests that, for certain road networks, the provision of online information deteriorate travel conditions for all users of that network relative to the situation where no online information is provided to users. The analytical presence of the paradox was derived for a specific network structure by using two equilibrium models, the first being the Expected User Equilibrium (EUE solution (no information scenario and the other being the User Equilibrium with Recourse (UER solution (with information scenario. An incentivised computerised route choice game was designed using the concepts of experimental economics and administered in a controlled laboratory environment to investigate the physical presence of the paradox. Aggregate statistics of path flows and Total System Travel Costs (TSTC were used to compare the experimental results with the theoretical findings. A total of 12 groups of 12 participants completed the experiment and the OIP and the occurrence of the OIP being significant was observed in 11 of the 12 cases. Though information increased travel costs for users on average, it reduced the volatility of travel costs experienced in the no information scenario indicating that information can achieve a more reliable system. Further replications of similar experiments and more importantly field based identification of the phenomena will force transport professionals to be aware of the emergence of the paradox. In addition, studies such as this emphasise the need for the adoption of adaptive traffic assignment techniques to appropriately model the acquisition of information on a road network.

Impact of the Road Profile on Vehicle Deceleration

Directory of Open Access Journals (Sweden)

Vidas Žuraulis

2012-11-01

Full Text Available The article analyzes the impact of the longitudinal road profile on the efficiency of car braking estimated applying deceleration value. Different formulas are used for theoretical calculations, and therefore experimental brakes in different road slopes were performed to obtain the most accurate results. Deceleration, as one of the most important safety parameters, depends on the technical condition of the braking system, road conditions and structural and dynamic properties of the other car. Road alignments can significantly affect car manageability, because of weight transfer and extra track resistance, which may change the overall balance of the car and affect the nature of dynamic characteristics that may vary from certain critical values. The results of corrections to deceleration dependence on the road profile can be used for investigating traffic accidents, optimizing traffic control arrangements and implementing advanced systems for automotive active safety.

Análise técnica e avaliação de trechos experimentais de misturas solo-lama de cal com vistas a aplicações em estradas florestais Technical analysis and evaluation of experimental field road sites of soil-whitewash mud mixtures for forest ROAD applications

Directory of Open Access Journals (Sweden)

Carlos Cardoso Machado

2007-04-01

Full Text Available Trechos rodoviários experimentais são ferramentas úteis para a avaliação da eficiência de material de construção de estradas. Neste artigo, apresenta-se uma avaliação do desempenho de trechos experimentais construídos com camadas de solos estabilizados com o resíduo sólido industrial denominado lama de cal, que é um subproduto gerado em indústrias de celulose. Com base nos resultados de ensaios de resistência mecânica de um extenso programa de laboratório, em que se realizaram ensaios de caracterização dos solos e estudos de dosagem das misturas, foram construídos três trechos experimentais na região de Alagoinhas, Bahia, Brasil. Em uma avaliação qualitativa desses trechos experimentais, o melhor desempenho de campo foi associado àquele construído com a mistura contendo 70% de solo cascalho de primeira e 30% do resíduo lama de cal.Experimental field road test sites are useful technical tools for evaluating the efficiency of road engineering materials. This paper is directed to the evaluation of performance of experimental field road test sites built using mixtures of in-place soils and industrial waste from the cellulose industry named whitewash mud. Analysis of data from an extensive laboratory testing program including soils geotechnical characterization and mixtures mechanical strength tests led to the construction of three experimental field road test sites in the municipality of Alagoinhas, Bahia State, Brazil. Data from a qualitative evaluation of these sites under field traffic conditions support that best performance can be associated to the road pilot test site built using mixture contents of 70 % of first class gravel and 30 % of whitewash mud.

Trajectory of a road vehicle during road maintenance

OpenAIRE

Stachová Darina

2017-01-01

Consider a vehicle moving on a road whose usage over time creates an uneven surface on the road. Road unevenness that we encounter on surface communications often arises as a consequence of dynamical effects of moving vehicles, of weather changes, and due to road construction works. This article concerns with mathematical modeling of the trajectory of a road vehicle moving on such a surface during the course of road maintenance.

Safer Roads: Comparisons Between Road Assessment Program and Composite Road Safety Index Method

Directory of Open Access Journals (Sweden)

Mohd Razelan Intan Suhana

2017-01-01

Full Text Available In most countries, crash statistics have becoming very crucial in evaluating road’s safety level. In Malaysia, these data are very important in deciding crash-prone areas known as black spot where specific road improvements plan will be proposed. However due to the unavailability of reliable crash data in many developing countries, appropriate road maintenance measures are facing great troubles. In light of that, several proactive methods in defining road’s safety level such as Road Assessment Program (RAP have emerged. This research aim to compare two proactive methods that have been tested in Malaysian roads ; road assessment program and road environment risk index which was developed based on composite index theory in defining road’s safety level. Composite road environment risk index was combining several crucial environment indicators, assigning weight and aggregating the individual index together to form a single value representing the road’s safety level. Based on the results, it can be concluded that both road assessment program and composite road environment risk index are contradicted in six different ways such as type of speed used, type of analysis used and their final outcomes. However, with an aim to promote safer roads, these two methods can be used concurrently as the outcomes in both methods seems to fulfil each other’s gap very well.

Using road markings as a continuous cue for speed choice.

Science.gov (United States)

Charlton, Samuel G; Starkey, Nicola J; Malhotra, Neha

2018-08-01

The potential for using road markings to indicate speed limits was investigated in a driving simulator over the course of two sessions. Two types of experimental road markings, an "Attentional" set designed to provide visually distinct cues to indicate speed limits of 60, 80 and 100 km/h, and a "Perceptual" set designed to also affect drivers' perception of speed, were compared to a standard undifferentiated set of markings. Participants (n = 20 per group) were assigned to one of four experimental groups (Attentional-Explicit, Attentional-Implicit, Perceptual-Explicit, Perceptual-Implicit) or a Control group (n = 22; standard road markings). The Explicit groups were instructed about the meaning of the road markings while those in the Implicit and Control groups did not receive any explanation. Participants drove five 10 km simulated roads containing three speed zones (60, 80 and 100 km/h) during the first session. The participants returned to the laboratory approximately 3 days later to drive five more trials including roads they had not seen before, a trial that included a secondary task, and a trial where speed signs were removed and only markings were present. The findings indicated that both types of road markings improved drivers' compliance with speed limits compared to the control group, but that explicit instruction as to the meaning of the markings was needed to realise their full benefit. Although previous research has indicated the benefit of road markings used as warnings to indicate speed reductions in advance of horizontal or vertical curves, the findings of the present experiment also suggest that systematically associating road markings with specific speed limits may be a useful way to improve speed limit compliance and increase speed homogeneity. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Road Detection by Using a Generalized Hough Transform

Directory of Open Access Journals (Sweden)

Weifeng Liu

2017-06-01

Full Text Available Road detection plays key roles for remote sensing image analytics. Hough transform (HT is one very typical method for road detection, especially for straight line road detection. Although many variants of Hough transform have been reported, it is still a great challenge to develop a low computational complexity and time-saving Hough transform algorithm. In this paper, we propose a generalized Hough transform (i.e., Radon transform implementation for road detection in remote sensing images. Specifically, we present a dictionary learning method to approximate the Radon transform. The proposed approximation method treats a Radon transform as a linear transform, which then facilitates parallel implementation of the Radon transform for multiple images. To evaluate the proposed algorithm, we conduct extensive experiments on the popular RSSCN7 database for straight road detection. The experimental results demonstrate that our method is superior to the traditional algorithms in terms of accuracy and computing complexity.

Experimental study of water fluxes in a residential area: 2. Road infiltration, runoff and evaporation

Science.gov (United States)

Ragab, R.; Rosier, P.; Dixon, A.; Bromley, J.; Cooper, J. D.

2003-08-01

Lack of accurate data has led some hydrologists and city planners to assume that urban infiltration is zero and runoff is 100% of the rainfall. These assumptions lead to an over estimation of road runoff volume and an underestimation of direct recharge to groundwater, which is already rising under some UK cities. This study investigates infiltration and runoff processes and quantifies the percentage of rainfall that contributes to storm drainage, and that which infiltrates through different types of road surface. Access tubes were installed for measuring soil water content using a neutron probe in three car parks, a road and a grass site at the Centre for Ecology and Hydrology, Crowmarsh Gifford, Wallingford. Storm drainage was recorded at the exit of the Thamesmead Estate in Crowmarsh Gifford, just before the drain joins the River Thames at Wallingford. Rainfall and water table depth were also recorded. Weekly measurements of soil moisture content indicated that the top 40 cm layer is not influenced by water-table fluctuations and, therefore, positive changes in soil moisture could be attributed to infiltration of rainfall through the surface. Depending on the nature of the surface, subsurface layers, level of traffic, etc., between 6 and 9% of rainfall was found to infiltrate through the road surfaces studied. The storm drainage generated by road runoff revealed a flow pattern similar to that of the receiving watercourse (River Thames) and increased with the increase of infiltration and soil water content below the road surface. The ratio of runoff to rainfall was 0·7, 0·9 and 0·5 for annual, winter (October-March) and summer (April-September) respectively. As the results of the infiltration indicated that 6 to 9% of annual rainfall infiltrates through the road surface, this means that evaporation represents, 21-24% of annual rainfall, with more evaporation taking place during summer than winter.

Automatic Road Centerline Extraction from Imagery Using Road GPS Data

Directory of Open Access Journals (Sweden)

Chuqing Cao

2014-09-01

Full Text Available Road centerline extraction from imagery constitutes a key element in numerous geospatial applications, which has been addressed through a variety of approaches. However, most of the existing methods are not capable of dealing with challenges such as different road shapes, complex scenes, and variable resolutions. This paper presents a novel method for road centerline extraction from imagery in a fully automatic approach that addresses the aforementioned challenges by exploiting road GPS data. The proposed method combines road color feature with road GPS data to detect road centerline seed points. After global alignment of road GPS data, a novel road centerline extraction algorithm is developed to extract each individual road centerline in local regions. Through road connection, road centerline network is generated as the final output. Extensive experiments demonstrate that our proposed method can rapidly and accurately extract road centerline from remotely sensed imagery.

Testing road surface treatments to reduce erosion in forest roads in Honduras [Tratamientos de la superficie de rodadura para reducir la erosion en caminos forestales en Honduras

Science.gov (United States)

Rivera, Samuel; Kershner, Jeffrey L.; Keller, Gordon R.

2009-01-01

Testing road surface treatments to reduce erosion in forest roads in Honduras. Cien. Inv. Agr. 36(3):425-432. Using forest roads produces more erosion and sedimentation than any other forest or agricultural activity. This study evaluated soil losses from a forest road in central Honduras over two consecutive years. We divided a 400-m segment of road into 8 experimental units, each 50 m in length. Four units were treated with Best Management Practices (BMPs) and four were left untreated. The BMP treatments included reshaping the road prism, installing culverts and reshaping of road ditches, compacting 20-cm layers of the road tread, crowning the road surface (3% slope, double drainage), longitudinal sloping (less than 12%), and adding a 10-cm layer of gravel (crush size = 0.63 cm). Soil movement was measured daily during the rainy seasons. The highest soil loss occurred in the control road, around 500 m3 km-1 per year, while the road treated with BMP lost approximately 225 m3km-1 per year. These results show that road surface erosion can be reduced up to 50% with the implementation of surface treatments.

Experimental investigations of tyre-road interactions during braking; Experimentelle Untersuchungen zur Interaktion zwischen Pkw-Reifen und Fahrbahn beim Bremsen

Energy Technology Data Exchange (ETDEWEB)

Chunyang Xie

2002-07-01

Tyre-road interactions during braking were investigated experimentally. The measurements were found to be highly accurate. In the first stage, the braking force is enhanced by elastic deformation of the profile elements at the onset of tyre contact. In case of high slip or a high sliding velocity, frictional vibration of the tyre section in contact with the road may occur, which is enhanced by the reduction of braking pressure in case of automatic brake control. The eigenfreequency of the frictional vibration also depends on the road texture and friction coefficient. The measured movements of the profile elements provide a good explanation of the causes of tyre noise. [German] In der Dissertation wurde die Interaktion Reifen/Fahrbahn beim Bremsen experimentell untersucht. Die Messungen zeigen, dass die mit dem neuen Reifensensor erfassten Profilelementverformungen den Reibungszustand zwischen Reifen und Fahrbahn gut widerspiegeln. Die Bremskraft wird zunaechst durch die elastischen Verformungen der Profilelemente am Anfang des Reifenlatsches wesentlich aufgebaut. Beim hohen Bremsschlupf bzw. der hohen Gleitgeschwindigkeit kann die Reibungsschwingung des Laufstreifens des Reifens auftreten. Der Bremsdruckabbau der ABS-Regelung beguenstigt die Entstehung dieser Reibungsschwingung. Die Eigenfrequenz der Reibungsschwingung ist auch abhaengig von der Fahrbahntextur und dem Reibwert. Die aus den Signalen des Profilrillensensors berechneten Beschleunigungen der Profilelemente zeigen deutlich den Aufschlag beim Einlauf des Reifens und das Ausschnappen beim Auslauf. Durch die gemessenen Bewegungen der Profilelemente laesst sich die Entstehung des Reifengeraeusches in einigen Frequenzbereichen gut erklaeren. (orig.)

Model simulation of Venezia-Mestre ring road air pollution: experimental check and model intercomparison

Energy Technology Data Exchange (ETDEWEB)

Biancotto, R.; Coraluppi, L.; Pistollato, S.; Rosa, M.; Tarabotti, E. [Veneto Region Environmental Protection Agency - Dept. of Venice, Mestre (Italy); Liguori, F.; Lorenzet, K.; Pillon, S. [Veneto Region Environmental Protection Agency - Regional Air Observatory, Mestre (Italy); Maffeis, G.R. [Terraria srl, Milano (Italy)

2004-07-01

Mestre is the mainland part of the City of Venice, one of the most densely populated urban centres in the Veneto Region. Its ring road is a 6-lane motorway, 8 kilometre long, passing through the urban centre (see. Figure 2). It is a toll-free elevated road, located in the intersection between the most important motorways in North-East Italy: the A4 motorway, connecting NW to NE Italy, and the A27 motorway that is part of the link between Southern and Northern Italy. The ring road is used not only for long-range travels, but also to drive through the urban area of Mestre, avoiding the urban network of roads. During winter time, average daily traffic (ADT) counts up to 40,000 vehicles. 60% is represented by Light Duty Vehicles (LDV), while the remaining 40% by Heavy Duty Vehicles (HDV). The highest ADT counts up to 65,000 vehicles, where 90% is represented by LDV while 10% by HDV. This ADT has been recorded in the summer season, when commuter and commercial travels add to vacation travels, whose destination are the beaches in the Veneto region coastline. (orig.)

THESEUS - achieving maximum possible road transport tanker safety by means of experimental accident simulation; THESEUS - Tankfahrzeuge mit hoechsterreichbarer Sicherheit durch experimentelle Unfallsimulation

Energy Technology Data Exchange (ETDEWEB)

Rompe, K.; Heuser, G.

1996-03-01

In spring 1990, the Federal German Minister for Education, Science, Research and Technology (BMBF) commissioned the team from the Federal Institute for Materials Research and Testing (BAM), DEKRA, Daimler-Benz, the Federal Road Research Institute (BASt) with the University of Cologne, Ellinghaus and TUeV Rheinland (project leader) to perform the research project `THESEUS` (the acronym THESEUS comes from the German `Tankfahrzeuge mit hoechst erreichbarer Sicherheit durch experimentelle Unfallsimulation`, which translates as `achieving maximum possible road transport tanker safety by means of experimental accident simulation`). Arting from an analysis of road transport tanker accidents, crash tests and overturn tests were performed and supplemented by investigations of road transport tanker components and accompanying complex calculations of the failure processes. Parallel to this, the static side-tilt stability of road transport tankers was determined on a tilting test platform. The causes of and constructive possibilities for avoiding overturning, which is the most common cause of accidents in which hazardous materials escape, wewre analysed in dynamic driving tests with supplementary computer simulation. Various measures for improving the safety of road transport tankers were determined and subjected to a cost-benefit analysis. (orig.) [Deutsch] Das Bundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie hat seit 1990 das Forschungsproject `THESEUS` (Tankfahrzeuge mit hoechst erreichbarer Sicherheit durch experimentelle Unfallsimulation) der Arbeitsgemeinschaft aus TUeV Rheinland (Federfuehrung), Bundesanstalt fuer Materialforschung und -pruefung (BAM), DEKRA, Daimler Benz, Bundesanstalt fuer Strassenwesen (BASt), Universitaet Koeln und Ellinghaus gefoerdert. Ausgehend von der detaillierten Analyse von 231 Tankfahrzeugunfaellen wurden Tankfahrzeug-Crashversuche und Tankfahrzeug-Umsturzversuche durchgefuehrt. Diese Messungen an kompletten Fahrzeugen

Road user behaviour changes following a self-explaining roads intervention.

Science.gov (United States)

Mackie, Hamish W; Charlton, Samuel G; Baas, Peter H; Villasenor, Pablo C

2013-01-01

The self-explaining roads (SER) approach uses road designs that evoke correct expectations and driving behaviours from road users to create a safe and user-friendly road network. Following the implementation of an SER process and retrofitting of local and collector roads in a suburb within Auckland City, lower speeds on local roads and less variation in speed on both local and collector roads were achieved, along with a closer match between actual and perceived safe speeds. Preliminary analyses of crash data shows that the project has resulted in a 30% reduction crash numbers and an 86% reduction in crash costs per annum, since the road changes were completed. In order to further understand the outcomes from this project, a study was carried out to measure the effects of the SER intervention on the activity and behaviour of all road users. Video was collected over nine separate days, at nine different locations, both before and after SER construction. Road user behaviour categories were developed for all potential road users at different location types and then used to code the video data. Following SER construction, on local roads there was a relatively higher proportion of pedestrians, less uniformity in vehicle lane keeping and less indicating by motorists along with less through traffic, reflecting a more informal/low speed local road environment. Pedestrians were less constrained on local roads following SER construction, possibly reflecting a perceptually safer and more user-friendly environment. These behaviours were not generally evident on collector roads, a trend also shown by the previous study of speed changes. Given that one of the objectives of SER is to match road user behaviour with functionally different road categories, the road user behaviour differences demonstrated on different road types within the SER trial area provides further reinforcement of a successful SER trial. Copyright © 2012 Elsevier Ltd. All rights reserved.

Verification of road databases using multiple road models

Science.gov (United States)

Ziems, Marcel; Rottensteiner, Franz; Heipke, Christian

2017-08-01

In this paper a new approach for automatic road database verification based on remote sensing images is presented. In contrast to existing methods, the applicability of the new approach is not restricted to specific road types, context areas or geographic regions. This is achieved by combining several state-of-the-art road detection and road verification approaches that work well under different circumstances. Each one serves as an independent module representing a unique road model and a specific processing strategy. All modules provide independent solutions for the verification problem of each road object stored in the database in form of two probability distributions, the first one for the state of a database object (correct or incorrect), and a second one for the state of the underlying road model (applicable or not applicable). In accordance with the Dempster-Shafer Theory, both distributions are mapped to a new state space comprising the classes correct, incorrect and unknown. Statistical reasoning is applied to obtain the optimal state of a road object. A comparison with state-of-the-art road detection approaches using benchmark datasets shows that in general the proposed approach provides results with larger completeness. Additional experiments reveal that based on the proposed method a highly reliable semi-automatic approach for road data base verification can be designed.

EFFECT OF A ROAD SAFETY EDUCATION INTERVENTION ON ROAD SAFETY KNOWLEDGE OF UNIVERSITY DRIVERS IN IBADAN, NIGERIA.

Science.gov (United States)

Olumide, A O; Owoaje, E T

2016-06-01

It is essential for drivers employed in the formal sector to have good knowledge of road safety in order to safeguard their lives and those of the staff they are employed to drive. The study was conducted to determine the effect of a road safety education intervention on road safety knowledge of drivers employed in the University of Ibadan, Nigeria. A quasi-experimental study of 98 intervention and 78 control drivers selected using a cluster sampling technique was conducted. The intervention comprised a two-day training on road safety and first aid. The drivers' knowledge of road safety was measured at baseline, immediately and 4-months post-intervention. Aggregate scores of road safety knowledge were computed giving minimum and maximum obtainable scores of 0 and 16 respectively. Change in mean scores over the three measurement periods was assessed using Repeated Measures Analysis of Variance (ANOVA). Independent t-test was used to compare the scores between intervention and control drivers at each of the assessment periods. Twenty-nine drivers did not complete the study (attrition rate = 16.5%). At baseline, mean road safety knowledge scores for the intervention and control drivers were 12.7±2.2 and 12.9± 2.3 (p = 0.510) respectively. Immediately and four months post intervention, the scores of the intervention drivers were 13.8±1.9 and 12.8±1.6; while scores for the controls were 13.3±2.0 and 13.2±1.8. Repeated measures ANOVA revealed that the increase in knowledge over the three assessment periods was not statistically significant. The intervention resulted in an initial increase in road safety knowledge of the intervention drivers. However, this was not sustained to the forth month post-intervention. This finding suggests periodic refresher trainings to sustain the knowledge acquired.

Strabo's roads

DEFF Research Database (Denmark)

Bekker-Nielsen, Tønnes

2017-01-01

in the Geography, and the world-view, of Strabo. Strabo did not take much interest in roads as artefacts or monuments, in the technology of road construction, or in the mythological and historical background of individual roads. He is primarily interested in roads from a functional point of view. For the general......To ancient geographers, roads were important not only as arteries of communication, but also as sources of information, since mileages measured along the Roman highways were among the very few precise distances available to the ancient geographer. This chapter explores the place of roads...... or the statesman, roads provide routes of communication; for the systematic geographer, they provide measured distances and directions. Through case studies of Spain, Gaul, Italy, Greece and Anatolia, this chapter attempts to reach a better understanding of the place of roads in Strabo’s universe, especially two...

Road profile estimation of city roads using DTPS

Science.gov (United States)

Wang, Qi; McDaniel, J. Gregory; Sun, Nian X.; Wang, Ming L.

2013-04-01

This work presents a non-destructive and non-contact acoustic sensing approach for measuring road profile of road and bridge deck with vehicles running at normal speed without stopping traffic. This approach uses an instantaneous and real-time dynamic tire pressure sensor (DTPS) that can measure dynamic response of the tire-road interaction and increases the efficiency of currently used road profile measuring systems with vehicle body-mounted profilers and axle-mounted accelerometers. In this work, a prototype of real-time DTPS system has been developed and demonstrated on a testing van at speeds from 5 to 80 miles per hour (mph). A data analysis algorithm has been developed to remove axle dynamic motions from the measured DTPS data and to find the transfer function between dynamic tire pressure change and the road profile. Field test has been performed to estimate road profiles. The road profile resolution is approximately 5 to 10 cm in width and sensitivity is 0. 3 cm for the height road surface features at driving speeds of 5 to 80 mph.

Full-scale experimentations on alternative materials in roads: analysis of study practices.

Science.gov (United States)

François, D; Jullien, A; Kerzreho, J P; Chateau, L

2009-03-01

In France beginning in the 1990s, the topic of road construction using various alternative materials has given rise to several studies aimed at clarifying the technical and environmental feasibility of such an option. Although crucial to understanding and forecasting their behaviour in the field, an analysis of feedback from onsite experiences (back analysis) of roads built with alternative materials has not yet been carried out. The aim of the CAREX project (2003-2005) has been to fill this gap at the national scale. Based on a stress-response approach applied to both the alternative material and the road structure and including the description of external factors, a dedicated standardised framework for field data classification and analysis was adopted. To carry out this analysis, a set of 17 documented field experiments was identified through a specific national survey. It appears that a great heterogeneity exists in data processing procedures among studies. The description of material is acceptable while it is generally poor regarding external factors and structure responses. Structure monitoring is usually brief and mechanical loads too weak, which limits the significance of field testing. For future full-scale experiments, strengthening the realism within the testing conditions would be appropriate.

Risk reduction in road and rail LPG transportation bij passive fire protection

NARCIS (Netherlands)

Molag e.a., M. (Menso)

2009-01-01

The potential reduction of risk in LPG (Liquified Petroleum Gas) road transport due to the adoption of passive fire protectionswas investigated. Experimental data available for small scale vessels fully engulfed by a fire were extended to real scale road and rail tankers through a finite elements

Risk reduction in road and rail LPG transportation by passive fire protection

NARCIS (Netherlands)

Paltrinieri, N.; Landucci, G.; Molag, M.; Bonvicini, S.; Spadoni, G.; Cozzani, V.

2009-01-01

The potential reduction of risk in LPG (Liquefied Petroleum Gas) road transport due to the adoption of passive fire protections was investigated. Experimental data available for small scale vessels fully engulfed by a fire were extended to real scale road and rail tankers through a finite elements

Predicting the effectiveness of road safety campaigns through alternative research designs.

Science.gov (United States)

Adamos, Giannis; Nathanail, Eftihia

2016-12-01

A large number of road safety communication campaigns have been designed and implemented in the recent years; however their explicit impact on driving behavior and road accident rates has been estimated in a rather low proportion. Based on the findings of the evaluation of three road safety communication campaigns addressing the issues of drinking and driving, seat belt usage, and driving fatigue, this paper applies different types of research designs (i.e., experimental, quasi-experimental, and non-experimental designs), when estimating the effectiveness of road safety campaigns, implements a cross-design assessment, and conducts a cross-campaign evaluation. An integrated evaluation plan was developed, taking into account the structure of evaluation questions, the definition of measurable variables, the separation of the target audience into intervention (exposed to the campaign) and control (not exposed to the campaign) groups, the selection of alternative research designs, and the appropriate data collection methods and techniques. Evaluating the implementation of different research designs in estimating the effectiveness of road safety campaigns, results showed that the separate pre-post samples design demonstrated better predictability than other designs, especially in data obtained from the intervention group after the realization of the campaign. The more constructs that were added to the independent variables, the higher the values of the predictability were. The construct that most affects behavior is intention, whereas the rest of the constructs have a lower impact on behavior. This is particularly significant in the Health Belief Model (HBM). On the other hand, behavioral beliefs, normative beliefs, and descriptive norms, are significant parameters for predicting intention according to the Theory of Planned Behavior (TPB). The theoretical and applied implications of alternative research designs and their applicability in the evaluation of road safety

Is road safety management linked to road safety performance?

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George

2013-10-01

This research aims to explore the relationship between road safety management and road safety performance at country level. For that purpose, an appropriate theoretical framework is selected, namely the 'SUNflower' pyramid, which describes road safety management systems in terms of a five-level hierarchy: (i) structure and culture, (ii) programmes and measures, (iii) 'intermediate' outcomes'--safety performance indicators (SPIs), (iv) final outcomes--fatalities and injuries, and (v) social costs. For each layer of the pyramid, a composite indicator is implemented, on the basis of data for 30 European countries. Especially as regards road safety management indicators, these are estimated on the basis of Categorical Principal Component Analysis upon the responses of a dedicated road safety management questionnaire, jointly created and dispatched by the ETSC/PIN group and the 'DaCoTA' research project. Then, quasi-Poisson models and Beta regression models are developed for linking road safety management indicators and other indicators (i.e. background characteristics, SPIs) with road safety performance. In this context, different indicators of road safety performance are explored: mortality and fatality rates, percentage reduction in fatalities over a given period, a composite indicator of road safety final outcomes, and a composite indicator of 'intermediate' outcomes (SPIs). The results of the analyses suggest that road safety management can be described on the basis of three composite indicators: "vision and strategy", "budget, evaluation and reporting", and "measurement of road user attitudes and behaviours". Moreover, no direct statistical relationship could be established between road safety management indicators and final outcomes. However, a statistical relationship was found between road safety management and 'intermediate' outcomes, which were in turn found to affect 'final' outcomes, confirming the SUNflower approach on the consecutive effect of each layer

A Procedure for Determining Tire-Road Friction Characteristics Using a Modification of the Magic Formula Based on Experimental Results.

Science.gov (United States)

Cabrera, Juan A; Castillo, Juan J; Pérez, Javier; Velasco, Juan M; Guerra, Antonio J; Hernández, Pedro

2018-03-17

Knowledge of tire-road friction characteristics is essential for the proper performance of most relevant vehicle active safety systems. Therefore, its determination is necessary to improve the effectiveness of these systems and to avoid or reduce the consequences of traffic accidents. For this reason, there is a great deal of literature concerning methods and devices for measuring and modeling tire-road friction. Most of these methods have focused on determining the road friction resistance, taking only road composition and making measurements in wet conditions into account. However, friction forces are also dependent on the tire type, since the contact is established between the tire and the road in real driving conditions. Thus, the type and characteristics of the tire have to be considered in the study of the interaction between the vehicle and the road. The aim of this work is to unify the study of the friction coefficient, taking into consideration the two existing bodies involved in the contact, i.e., the tire and road and the main factors that influence the forces in the contact. To this end, a modification of the Pacejka Magic Formula is proposed to include the effects of the main parameters that influence the contact, such as road composition and its state, tire type, vehicle speed, and slip between the tire and the road. To do so, real tests have been conducted on several roads and with different operating conditions. As a result, a more accurate tire-road friction model has been obtained.

A Procedure for Determining Tire-Road Friction Characteristics Using a Modification of the Magic Formula Based on Experimental Results

Science.gov (United States)

Pérez, Javier; Velasco, Juan M.; Guerra, Antonio J.; Hernández, Pedro

2018-01-01

Knowledge of tire-road friction characteristics is essential for the proper performance of most relevant vehicle active safety systems. Therefore, its determination is necessary to improve the effectiveness of these systems and to avoid or reduce the consequences of traffic accidents. For this reason, there is a great deal of literature concerning methods and devices for measuring and modeling tire-road friction. Most of these methods have focused on determining the road friction resistance, taking only road composition and making measurements in wet conditions into account. However, friction forces are also dependent on the tire type, since the contact is established between the tire and the road in real driving conditions. Thus, the type and characteristics of the tire have to be considered in the study of the interaction between the vehicle and the road. The aim of this work is to unify the study of the friction coefficient, taking into consideration the two existing bodies involved in the contact, i.e., the tire and road and the main factors that influence the forces in the contact. To this end, a modification of the Pacejka Magic Formula is proposed to include the effects of the main parameters that influence the contact, such as road composition and its state, tire type, vehicle speed, and slip between the tire and the road. To do so, real tests have been conducted on several roads and with different operating conditions. As a result, a more accurate tire-road friction model has been obtained. PMID:29562623

A Procedure for Determining Tire-Road Friction Characteristics Using a Modification of the Magic Formula Based on Experimental Results

Directory of Open Access Journals (Sweden)

Juan A. Cabrera

2018-03-01

Full Text Available Knowledge of tire-road friction characteristics is essential for the proper performance of most relevant vehicle active safety systems. Therefore, its determination is necessary to improve the effectiveness of these systems and to avoid or reduce the consequences of traffic accidents. For this reason, there is a great deal of literature concerning methods and devices for measuring and modeling tire-road friction. Most of these methods have focused on determining the road friction resistance, taking only road composition and making measurements in wet conditions into account. However, friction forces are also dependent on the tire type, since the contact is established between the tire and the road in real driving conditions. Thus, the type and characteristics of the tire have to be considered in the study of the interaction between the vehicle and the road. The aim of this work is to unify the study of the friction coefficient, taking into consideration the two existing bodies involved in the contact, i.e., the tire and road and the main factors that influence the forces in the contact. To this end, a modification of the Pacejka Magic Formula is proposed to include the effects of the main parameters that influence the contact, such as road composition and its state, tire type, vehicle speed, and slip between the tire and the road. To do so, real tests have been conducted on several roads and with different operating conditions. As a result, a more accurate tire-road friction model has been obtained.

Simulating autonomous driving styles: Accelerations for three road profiles

Directory of Open Access Journals (Sweden)

Karjanto Juffrizal

2017-01-01

Full Text Available This paper presents a new experimental approach to simulate projected autonomous driving styles based on the accelerations at three road profiles. This study was focused on the determination of ranges of accelerations in triaxial direction to simulate the autonomous driving experience. A special device, known as the Automatic Acceleration and Data controller (AUTOAccD, has been developed to guide the designated driver to accomplish the selected accelerations based on the road profiles and the intended driving styles namely assertive, defensive and light rail transit (LRT. Experimental investigations have been carried out at three different road profiles (junction, speed hump, and corner with two designated drivers with five trials on each condition. A driving style with the accelerations of LRT has also been included in this study as it is significant to the present methodology because the autonomous car is predicted to accelerate like an LRT, in such a way that it enables the users to conduct activities such as working on a laptop, using personal devices or eating and drinking while travelling. The results demonstrated that 92 out of 110 trials of the intended accelerations for autonomous driving styles could be achieved and simulated on the real road by the designated drivers. The differences between the two designated drivers were negligible, and the rates of succeeding in realizing the intended accelerations were high. The present approach in simulating autonomous driving styles focusing on accelerations can be used as a tool for experimental setup involving autonomous driving experience and acceptance.

Distributed road assessment system

Science.gov (United States)

Beer, N. Reginald; Paglieroni, David W

2014-03-25

A system that detects damage on or below the surface of a paved structure or pavement is provided. A distributed road assessment system includes road assessment pods and a road assessment server. Each road assessment pod includes a ground-penetrating radar antenna array and a detection system that detects road damage from the return signals as the vehicle on which the pod is mounted travels down a road. Each road assessment pod transmits to the road assessment server occurrence information describing each occurrence of road damage that is newly detected on a current scan of a road. The road assessment server maintains a road damage database of occurrence information describing the previously detected occurrences of road damage. After the road assessment server receives occurrence information for newly detected occurrences of road damage for a portion of a road, the road assessment server determines which newly detected occurrences correspond to which previously detected occurrences of road damage.

Short-term variability of mineral dust, metals and carbon emission from road dust resuspension

Science.gov (United States)

Amato, Fulvio; Schaap, Martijn; Denier van der Gon, Hugo A. C.; Pandolfi, Marco; Alastuey, Andrés; Keuken, Menno; Querol, Xavier

2013-08-01

Particulate matter (PM) pollution in cities has severe impact on morbidity and mortality of their population. In these cities, road dust resuspension contributes largely to PM and airborne heavy metals concentrations. However, the short-term variation of emission through resuspension is not well described in the air quality models, hampering a reliable description of air pollution and related health effects. In this study we experimentally show that the emission strength of resuspension varies widely among road dust components/sources. Our results offer the first experimental evidence of different emission rates for mineral dust, heavy metals and carbon fractions due to traffic-induced resuspension. Also, the same component (or source) recovers differently in a road in Barcelona (Spain) and a road in Utrecht (The Netherlands). This finding has important implications on atmospheric pollution modelling, mostly for mineral dust, heavy metals and carbon species. After rain events, recoveries were generally faster in Barcelona rather than in Utrecht. The largest difference was found for the mineral dust (Al, Si, Ca). Tyre wear particles (organic carbon and zinc) recovered faster than other road dust particles in both cities. The source apportionment of road dust mass provides useful information for air quality management.

Impacts of disturbance initiated by road construction in a subtropical cloud forest in the Luquillo Experimental Forest, Puerto Rico

Science.gov (United States)

Lydia P. Olander; F.N Scatena; Whendee L. Silver

1998-01-01

The impacts of road construction and the spread of exotic vegetation, which are common threats to upper elevation tropical forests, were evaluated in the subtropical cloud forests of Puerto Rico. The vegetation, soil and microclimate of 6-month-old road®lls, 35-year-old road®lls and mature forest with and without grass understories were compared. Recent road®lls had...

AN INVESTIGATION ON THE FOREST ROAD PLANNING AND ROAD GROUND

Directory of Open Access Journals (Sweden)

Hafız Hulusi ACAR

2001-01-01

Full Text Available It is required that the capital used for construction of road must be technical, economical and used in its location. For this reason, the projects must be prepared for forest roads and all operations belong to roads must be guided according to these projects. In this investigation, available forest road network plan and constructed forest roads were investigated at the point of view technical and forest transportation. After this, it were studied to reach the highest exploitation rate as can as possible. Available forest road density were found as 11.9 m/ha in forest areas for Yesiltepe District. In this condition, exploitation rate was 78 %. After that, optimum forest road network were planned and road density were reached to 22 m/ha and exploitation rate to 86 %. Directed sample method were used from taking soil sample methods and samples were took in mixed system. According to results of the experiments, available forest roads were found in a good degree at the point of view endurance, pressing and transportation capacity. With these results, it is aimed to reach higher exploitation rate with given attention to landslide areas during planning of forest roads on the mountain areas such as Black Sea Region. For this reason, required importance must be given to planning of truck and logging roads. Ground analysis must be done and took care before during planning process of forest road network.

Feature Fusion Based Road Extraction for HJ-1-C SAR Image

Directory of Open Access Journals (Sweden)

Lu Ping-ping

2014-06-01

Full Text Available Road network extraction in SAR images is one of the key tasks of military and civilian technologies. To solve the issues of road extraction of HJ-1-C SAR images, a road extraction algorithm is proposed based on the integration of ratio and directional information. Due to the characteristic narrow dynamic range and low signal to noise ratio of HJ-1-C SAR images, a nonlinear quantization and an image filtering method based on a multi-scale autoregressive model are proposed here. A road extraction algorithm based on information fusion, which considers ratio and direction information, is also proposed. By processing Radon transformation, main road directions can be extracted. Cross interferences can be suppressed, and the road continuity can then be improved by the main direction alignment and secondary road extraction. The HJ-1-C SAR image acquired in Wuhan, China was used to evaluate the proposed method. The experimental results show good performance with correctness (80.5% and quality (70.1% when applied to a SAR image with complex content.

Miscellaneous Roads

Data.gov (United States)

Minnesota Department of Natural Resources — This data set contains roadway centerlines for miscellanous roads, a catch-all category for all road types not present in the other DNR derived products. These road...

Decontamination by shotblasting of radioactivity deposited on an asphalt road

International Nuclear Information System (INIS)

Warming, L.

1987-01-01

Long-lived fission products may be deposited in the environment after a serious reactor accident. From previous experiments it is known that if firehosing is to be used for decontamination it has to be done soon after the deposition. It is therefore worthwhile to study another decontamination method. An experimental study has been conducted of how well shotblasting can remove contamination from an asphalt road. In shotblasting a thin layer of the surface is loosened by the impact of small steel balls, and in the same procedure the surface dust is vacuumed up and the steel balls recovered. The contaminant was 86 Rb, which behaves as caesium. As reference, the weathering of identical contamination on an asphalt road, a concrete road and a road covered with small concrete stones was studied concurrently. (author)

Energy-saving quality road lighting with colloidal quantum dot nanophosphors

Science.gov (United States)

Erdem, Talha; Kelestemur, Yusuf; Soran-Erdem, Zeliha; Ji, Yun; Demir, Hilmi Volkan

2014-12-01

Here the first photometric study of road-lighting white light-emitting diodes (WLEDs) integrated with semiconductor colloidal quantum dots (QDs) is reported enabling higher luminance than conventional light sources, specifically in mesopic vision regimes essential to street lighting. Investigating over 100 million designs uncovers that quality road-lighting QD-WLEDs, with a color quality scale and color rendering index ≥85, enables 13-35% higher mesopic luminance than the sources commonly used in street lighting. Furthermore, these QD-WLEDs were shown to be electrically more efficient than conventional sources with power conversion efficiencies ≥16-29%. Considering this fact, an experimental proof-of-concept QD-WLED was demonstrated, which is the first account of QD based color conversion custom designed for street lighting applications. The obtained white LED achieved the targeted mesopic luminance levels in accordance with the road lighting standards of the USA and the UK. These results indicate that road-lighting QD-WLEDs are strongly promising for energy-saving quality road lighting.

Invasive Brown Treesnake movements at road edges indicate road-crossing avoidance

Science.gov (United States)

Siers, Shane R.; Savidge, Julie S; Reed, Robert N.

2014-01-01

Roads have significant impacts on the dispersal of wildlife. Although this poses a threat to the abundance and diversity of desirable flora and fauna, it also affords some opportunity for enhancing control of invasive species. Roads are the most common terrain features that may affect the rate of landscape-scale movements of invasive Brown Treesnakes (Boiga irregularis) throughout Guam. We radio tracked 45 free-ranging Brown Treesnakes in close proximity to two roads in Guam and recorded instances where daily relocations of snakes spanned roads. Then we reconstructed observed movement histories with randomized turning angles, which served as a useful null hypothesis for assessing the effect of roads or road edge habitat on Brown Treesnake movement patterns. Random walk simulations demonstrated that Brown Treesnakes crossed these roads at a rate far lower than would be expected if snake movement was random with respect to roads and road edge habitat. We discuss two alternative hypotheses for these results: 1) habitat gaps posed by roads physically or behaviorally restrict snake movement; or 2) road edges provide preferred foraging habitat from which snakes are reluctant to depart. Because roads often form the boundaries of jurisdictional and management units, the effects of roads on the movement of invasive Brown Treesnakes will influence the prospects for success of future landscape-level suppression efforts.

Hygienic assessment of using rocks with high content of natural radionuclides in road construction

International Nuclear Information System (INIS)

Kornilov, A.N.; Ryabchikov, S.G.

1983-01-01

Experimental investigations on radiation hygienic assessment of the possibilities of using rocks with an increased content of natural radionuclides (NRN) are carried out. At experimental road portions constructed using such rocks, γ-radiation levels have been measured and radioactive contamination of the ad-- jacent territory has been determined. The danger presented by such roads for highway engineering workers and population also has been assessed. The results obtained permit to express a possitive opinion on the use of solid wastes with an increased NRN content for construction of roads with asphalt coating. Rocks with specific α-activity 3 Bq/kg are recommended to be used for any types of road construction, whereas wastes with specific α-activity 3 Bq/kg - only for road construction in an industrial zone, between populated areas and for thoroughfares and highways. The use of wastes with a higher NRN content is unreasonable as it leads to a growth of annular dose to population and excessive exposure of construction workers engaged in highway engineering operations

An Information Retrieval Approach for Robust Prediction of Road Surface States.

Science.gov (United States)

Park, Jae-Hyung; Kim, Kwanho

2017-01-28

Recently, due to the increasing importance of reducing severe vehicle accidents on roads (especially on highways), the automatic identification of road surface conditions, and the provisioning of such information to drivers in advance, have recently been gaining significant momentum as a proactive solution to decrease the number of vehicle accidents. In this paper, we firstly propose an information retrieval approach that aims to identify road surface states by combining conventional machine-learning techniques and moving average methods. Specifically, when signal information is received from a radar system, our approach attempts to estimate the current state of the road surface based on the similar instances observed previously based on utilizing a given similarity function. Next, the estimated state is then calibrated by using the recently estimated states to yield both effective and robust prediction results. To validate the performances of the proposed approach, we established a real-world experimental setting on a section of actual highway in South Korea and conducted a comparison with the conventional approaches in terms of accuracy. The experimental results show that the proposed approach successfully outperforms the previously developed methods.

Road Service Performance Based On Integrated Road Design Consistency (IC) Along Federal Road F0023

OpenAIRE

Zainal Zaffan Farhana; Prasetijo Joewono; Musa Wan Zahidah

2017-01-01

Road accidents are one of the world’s largest public health and injury prevention problems. In Malaysia, the west coast area of Malaysia been stated as the highest motorcycle fatalities and road accidents are one of the factors that cause of death and injuries in this country. The most common fatal accident is between a motorcycle and passenger car. The most of the fatal accidents happened on Federal roads with 44 fatal accidents reported, which is equal to 29%. Lacks of road geometric design...

Predictability by recognizable road design. [previously called: Recognizable road design.

NARCIS (Netherlands)

2007-01-01

One of the Sustainable Safety principles is that a road should have a recognizable design and a predictable alignment. If this is the case, road users know how they are expected to behave and what they can expect from other road users, so that crashes may be prevented. For roads to be recognizable,

Road analysis: a tool for cost-effective rehabilitation measures for Finnish roads

Science.gov (United States)

Roimela, Petri; Salmenkaita, Seppo; Maijala, Pekka; Saarenketo, Timo

2000-04-01

Public funding for road network maintenance has decreased 30% during the last few years in Finland. Reduced resources, together with the current rehabilitation strategies, will in the long term result in increasing deterioration of the Finnish road network. For this reason road rehabilitation funding should be focused more specifically on those roads and road sections requiring measures and these measures should be optimized to ensure that only the specific problem structure will be repaired. Roadscanners Oy, in cooperation with the Finnish National Road Administration (Finnra), has developed a new and effective Road Analysis technique to survey the condition of roads and road networks. Road Analysis is based on the integrated analysis of the measured data collected from the road under survey. The basic survey methods used in Road Analysis include Ground Penetrating Data (GPR), falling weight deflectometer (FWD), roughness and rutting measurements, pavement distress mapping and GPS-positioning, as well as reference drilling based on preliminary GPR data analysis. The collected road survey data is processed, interpreted, analyzed and classified using Road Doctor software, specifically developed for this purpose. GPR measurements in road analysis are carried out using a 400 MHz ground-coupled antenna and a 1.0 GHz horn antenna. Horn antenna data is used to measure the thickness of the pavement and base course layers, as well as to evaluate their quality based on their dielectric properties. The 400 MHz ground-coupled data is used to estimate the thickness of the pavement structure and embankment. Ground-coupled antenna data is used for subgrade quality estimations and in evaluating the causes of subgrade- related frost defects. GPR data also provides important location information about special structures, such as steel reinforcements, cables and pipelines. Road Analysis includes a classification of the critical elements affecting the lifetime of the road: (1

Road pricing and road safety : possible effects on road safety of 23 variants of road pricing.

NARCIS (Netherlands)

Eenink, R.G. Dijkstra, A. Wijnen, W. & Janssen, S.T.M.C.

2007-01-01

The Nouwen Committee (National Platform Paying Differently for Mobility) advised the Cabinet in 2005 about the introduction of a system of road pricing. Part of this advice consisted of a calculation of the expected road safety effects of such a system. In a letter to the Minister of Transport, SWOV

Road Service Performance Based On Integrated Road Design Consistency (IC Along Federal Road F0023

Directory of Open Access Journals (Sweden)

Zainal Zaffan Farhana

2017-01-01

Full Text Available Road accidents are one of the world’s largest public health and injury prevention problems. In Malaysia, the west coast area of Malaysia been stated as the highest motorcycle fatalities and road accidents are one of the factors that cause of death and injuries in this country. The most common fatal accident is between a motorcycle and passenger car. The most of the fatal accidents happened on Federal roads with 44 fatal accidents reported, which is equal to 29%. Lacks of road geometric designs consistency where the drivers make mistakes errors due to the road geometric features causes the accident kept rising in Malaysia. Hence, models are based on operating speed to calculate design consistency of road. The profiles were obtained by continuous speed profile using GPS data. The continuous operating speed profile models were plotted based on operating speed model (85th percentile. The study was conduct at F0023 from km 16 until km 20. The purpose of design consistency is to know the relationship between the operating speed and elements of geometric design on the road. As a result, the integrated design consistency motorcycle and cars along a segment at F0023, the threshold shows poor design quality for motorcycles and cars.

Road safety performance indicators for the interurban road network.

NARCIS (Netherlands)

Yannis, G. Weijermars, W.A.M. Gitelman, V. Vis, M. Chazirisa, A. Papadimitriou, E. & Lima Azevedo, C.

2013-01-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The

How effective is road mitigation at reducing road-kill? A meta-analysis

NARCIS (Netherlands)

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A.G.; Fahrig, Lenore; Findlay, C.S.; Houlahan, Jeff; Ree, van der Rodney; Grift, van der Edgar A.

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners,

EXPERIMENTAL INVESTIGATION ON PREFABRICATED ROAD PANEL BY USING WASTE MATERIALS

OpenAIRE

M. Aravinth; P. Arun Kumar; R. Aravind Kumar; S. Arun Kumar

2018-01-01

Plastics are user friendly but not eco-friendly as they are non-biodegradable. Generally it is disposed by way of land filling or incineration of materials which are hazardous. The better binding property of plastics in its molten state has helped in finding out a method of safe disposal of waste plastics, by using them in road laying. Use of plastic waste (HDPE) and Crumb Rubber. This not only allows us to collect modifier raw material at low cost, but also provides a solution towards ecolog...

High Resolution Trichromatic Road Surface Scanning with a Line Scan Camera and Light Emitting Diode Lighting for Road-Kill Detection

Directory of Open Access Journals (Sweden)

Gil Lopes

2016-04-01

Full Text Available This paper presents a road surface scanning system that operates with a trichromatic line scan camera with light emitting diode (LED lighting achieving road surface resolution under a millimeter. It was part of a project named Roadkills—Intelligent systems for surveying mortality of amphibians in Portuguese roads, sponsored by the Portuguese Science and Technology Foundation. A trailer was developed in order to accommodate the complete system with standalone power generation, computer image capture and recording, controlled lighting to operate day or night without disturbance, incremental encoder with 5000 pulses per revolution attached to one of the trailer wheels, under a meter Global Positioning System (GPS localization, easy to utilize with any vehicle with a trailer towing system and focused on a complete low cost solution. The paper describes the system architecture of the developed prototype, its calibration procedure, the performed experimentation and some obtained results, along with a discussion and comparison with existing systems. Sustained operating trailer speeds of up to 30 km/h are achievable without loss of quality at 4096 pixels’ image width (1 m width of road surface with 250 µm/pixel resolution. Higher scanning speeds can be achieved by lowering the image resolution (120 km/h with 1 mm/pixel. Computer vision algorithms are under development to operate on the captured images in order to automatically detect road-kills of amphibians.

High Resolution Trichromatic Road Surface Scanning with a Line Scan Camera and Light Emitting Diode Lighting for Road-Kill Detection.

Science.gov (United States)

Lopes, Gil; Ribeiro, A Fernando; Sillero, Neftalí; Gonçalves-Seco, Luís; Silva, Cristiano; Franch, Marc; Trigueiros, Paulo

2016-04-19

This paper presents a road surface scanning system that operates with a trichromatic line scan camera with light emitting diode (LED) lighting achieving road surface resolution under a millimeter. It was part of a project named Roadkills-Intelligent systems for surveying mortality of amphibians in Portuguese roads, sponsored by the Portuguese Science and Technology Foundation. A trailer was developed in order to accommodate the complete system with standalone power generation, computer image capture and recording, controlled lighting to operate day or night without disturbance, incremental encoder with 5000 pulses per revolution attached to one of the trailer wheels, under a meter Global Positioning System (GPS) localization, easy to utilize with any vehicle with a trailer towing system and focused on a complete low cost solution. The paper describes the system architecture of the developed prototype, its calibration procedure, the performed experimentation and some obtained results, along with a discussion and comparison with existing systems. Sustained operating trailer speeds of up to 30 km/h are achievable without loss of quality at 4096 pixels' image width (1 m width of road surface) with 250 µm/pixel resolution. Higher scanning speeds can be achieved by lowering the image resolution (120 km/h with 1 mm/pixel). Computer vision algorithms are under development to operate on the captured images in order to automatically detect road-kills of amphibians.

Joint road safety operations in tunnels and open roads

Science.gov (United States)

Adesiyun, Adewole; Avenoso, Antonio; Dionelis, Kallistratos; Cela, Liljana; Nicodème, Christophe; Goger, Thierry; Polidori, Carlo

2017-09-01

The objective of the ECOROADS project is to overcome the barrier established by the formal interpretation of the two Directives 2008/96/EC and 2004/54/EC, which in practice do not allow the same Road Safety Audits/Inspections to be performed inside tunnels. The projects aims at the establishment of a common enhanced approach to road infrastructure and tunnel safety management by using the concepts and criteria of the Directive 2008/96/CE on road infrastructure safety management and the results of related European Commission (EC) funded projects. ECOROADS has already implemented an analysis of national practices regarding Road Safety Inspections (RSI), two Workshops with the stakeholders, and an exchange of best practices between European tunnel experts and road safety professionals, which led to the definition of common agreed safety procedures. In the second phase of the project, different groups of experts and observers applied the above common procedures by inspecting five European road sections featuring both open roads and tunnels in Belgium, Albania, Germany, Serbia and Former Yugoslav Republic of Macedonia. This paper shows the feedback of the 5 joint safety operations and how they are being used for a set of - recommendations and guidelines for the application of the RSA and RSI concepts within the tunnel safety operations.

How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis

OpenAIRE

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A. G.; Fahrig, Lenore; Findlay, C. Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these...

Road Network Selection Based on Road Hierarchical Structure Control

Directory of Open Access Journals (Sweden)

HE Haiwei

2015-04-01

Full Text Available A new road network selection method based on hierarchical structure is studied. Firstly, road network is built as strokes which are then classified into hierarchical collections according to the criteria of betweenness centrality value (BC value. Secondly, the hierarchical structure of the strokes is enhanced using structural characteristic identification technique. Thirdly, the importance calculation model was established according to the relationships among the hierarchical structure of the strokes. Finally, the importance values of strokes are got supported with the model's hierarchical calculation, and with which the road network is selected. Tests are done to verify the advantage of this method by comparing it with other common stroke-oriented methods using three kinds of typical road network data. Comparision of the results show that this method had few need to semantic data, and could eliminate the negative influence of edge strokes caused by the criteria of BC value well. So, it is better to maintain the global hierarchical structure of road network, and suitable to meet with the selection of various kinds of road network at the same time.

Road pricing policy implementation

NARCIS (Netherlands)

Vonk Noordegraaf, D.M.

2016-01-01

Urban areas suffer from the negative externalities of road transport like congested road networks, air pollution and road traffic accidents. A measure to reduce these negative externalities is road pricing, meaning policies that impose direct charges on road use (Jones and Hervik, 1992). Since the

Effect of the Road Environment on Road Safety in Poland

Science.gov (United States)

Budzynski, Marcin; Jamroz, Kazimierz; Antoniuk, Marcin

2017-10-01

Run-off-road accidents tend to be very severe because when a vehicle leaves the road, it will often crash into a solid obstacle (tree, pole, supports, front wall of a culvert, barrier). A statistical analysis of the data shows that Poland’s main roadside hazard is trees and the severity of vehicles striking a tree in a run-off-road crash. The risks are particularly high in north-west Poland with many of the roads lined up with trees. Because of the existing rural road cross-sections, i.e. having trees directly on road edge followed immediately by drainage ditches, vulnerable road users are prevented from using shoulders and made to use the roadway. With no legal definition of the road safety zone in Polish regulations, attempts to remove roadside trees lead to major conflicts with environmental stakeholders. This is why a compromise should be sought between the safety of road users and protection of the natural environment and the aesthetics of the road experience. Rather than just cut the trees, other road safety measures should be used where possible to treat the hazardous spots by securing trees and obstacles and through speed management. Accidents that are directly related to the road environment fall into the following categories: hitting a tree, hitting a barrier, hitting a utility pole or sign, vehicle rollover on the shoulder, vehicle rollover on slopes or in ditch. The main consequence of a roadside hazard is not the likelihood of an accident itself but of its severity. Poland’s roadside accident severity is primarily the result of poor design or operation of road infrastructure. This comes as a consequence of a lack of regulations or poorly defined regulations and failure to comply with road safety standards. The new analytical model was designed as a combination of the different factors and one that will serve as a comprehensive model. It was assumed that it will describe the effect of the roadside on the number of accidents and their consequences

Willingness to use mobile application for smartphone for improving road safety.

Science.gov (United States)

Cardamone, Angelo Stephen; Eboli, Laura; Forciniti, Carmen; Mazzulla, Gabriella

2016-01-01

In the last few years mobile devices have reached a large amount of consumers in both developed and high-growth world economies. In 2013, 97% of the Italian population owns a mobile phone, and 62% owns a smartphone. Application software for mobile devices is largely proposed to consumers, and several mobile applications were oriented toward the improvement of road safety and road accident risk reduction. In this paper, we describe the results of a survey oriented to preventively investigate on the willingness to receive and/or to give information about road condition by means of mobile devices. Road users were informed about the characteristics of a mobile application, and then they were invited to complete a questionnaire. Experimental data were used for capturing road user attitudes toward the use of the smartphone to improve road safety, and to establish the preferences for the different features of the proposed mobile application. To this end, we choose to use the ordered probit model methodology. We demonstrate that the adopted methodology accounts for the differential impacts of the willingness to receive and/or to give information about road conditions on the overall willingness to receive and/or to give information through an application software for mobile devices.

eRoads

DEFF Research Database (Denmark)

Connolly, David

vehicles enable more renewable electricity to be integrated onto the electricity grid. This is particularly evident in 2050, since the price of fossil fuels increases while the price of renewable electricity and batteries decreases. Finally, the electric road scenarios can facilitate more reductions......This study compares electric roads with oil (petrol and diesel) and battery electric vehicles, using Denmark as a case study. Electric roads can reduce the cost of electric vehicles by supplying them with electricity directly from the road rather than via a battery for long-distance journeys....... In this paper, an electric road scenario is compared to both an oil and battery electric vehicle scenario using the 2010 Danish energy system, but for two sets of costs: one set based on historical costs from the year 2010 and one based on projected costs for the year 2050. The results indicate that electric...

When Dijkstra Meets Vanishing Point: A Stereo Vision Approach for Road Detection.

Science.gov (United States)

Zhang, Yigong; Su, Yingna; Yang, Jian; Ponce, Jean; Kong, Hui

2018-05-01

In this paper, we propose a vanishing-point constrained Dijkstra road model for road detection in a stereo-vision paradigm. First, the stereo-camera is used to generate the u- and v-disparity maps of road image, from which the horizon can be extracted. With the horizon and ground region constraints, we can robustly locate the vanishing point of road region. Second, a weighted graph is constructed using all pixels of the image, and the detected vanishing point is treated as the source node of the graph. By computing a vanishing-point constrained Dijkstra minimum-cost map, where both disparity and gradient of gray image are used to calculate cost between two neighbor pixels, the problem of detecting road borders in image is transformed into that of finding two shortest paths that originate from the vanishing point to two pixels in the last row of image. The proposed approach has been implemented and tested over 2600 grayscale images of different road scenes in the KITTI data set. The experimental results demonstrate that this training-free approach can detect horizon, vanishing point, and road regions very accurately and robustly. It can achieve promising performance.

Experimental study of collapsing properties of the compacted soil foundation of auto-road embankment

Directory of Open Access Journals (Sweden)

Yushkov Boris Semenovich

2014-06-01

Full Text Available The loess collapsing soils are practically ubiquitously distributed in the Perm region. They occupy about 30% of the region area. The mass construction of buildings and structures of different purposes is conducted there. Design and construction of auto-roads on the collapsing soils by ensuring their strength and normal operation is one of the most important and difficult problems of the modern construction. It is recommended to eliminate collapsing properties of soils within the entire collapsing strata with the use of deep compaction by rammers and presoaking of foundation soils, including that with deepwater explosions, chemical or thermal fixing. Multi-year practice of construction on the collapsing soils in the regions of our country showed that during erection of the various structures the removal of the powerful loess soil collapsibility is achieved with the help of methods described above, each of which is selected on the basis of the conditions and possibilities of application. This article describes the following tasks: 1. Study and generalization of the available experience of road construction on the loess soils; 2. Zoning and classification (typing of the loess strata; 3. Selection of the engineering-geological factors influencing the choice of method for compacting collapsing soils; 4. General provisions for road construction on the collapsing soils.

[Prevention of road accidents in the road haulage field].

Science.gov (United States)

Rosso, G L; Zanelli, R; Corino, P; Bruno, S

2007-01-01

Every year many traffic accidents with fatal outcomes occur in our Country. According to the recent indications of the European Agency for Safety and Health at Work, the Piedmont region has financed the plan: Prevention of road accidents in the road haulage field. The aims of the plan are to stimulate transport companies to the target of road safety and to improve and enforce sanitary surveillance, in order to improve the safety on road haulage and to prevent traffic injuries. the plan foresees, over a period of two years, a few encounters with all the interested parties (companies, police forces, labour unions etc). During those encounters we have to give a questionnaire for evaluating the companies' knowledge about the problem and we have to choose a common plan with the aim of improving road safety. The Piedmont regional plan recalls the need to increase the attention to numerous and diversified hazards for safety on road haulage. It also imposes the choice of measures that include: risk assessment, health education, technical and environmental prevention, sanitary surveillance and clinical interventions (diagnosis and rehabilitation of occupational accidents).

Automated road network extraction from high spatial resolution multi-spectral imagery

Science.gov (United States)

Zhang, Qiaoping

road network. The extracted road network is evaluated against a reference dataset using a line segment matching algorithm. The entire process is unsupervised and fully automated. Based on extensive experimentation on a variety of remotely-sensed multi-spectral images, the proposed methodology achieves a moderate success in automating road network extraction from high spatial resolution multi-spectral imagery.

All-terrain vehicle fatalities on paved roads, unpaved roads, and off-road: Evidence for informed roadway safety warnings and legislation.

Science.gov (United States)

Denning, Gerene M; Jennissen, Charles A

2016-05-18

All-terrain vehicles (ATVs) are designed for off-highway use only, and many of their features create increased risk with roadway travel. Over half of all ATV-related fatalities occur on roadways, and nonfatal roadway crashes result in more serious injuries than those off the road. A number of jurisdictions have passed or have considered legislation allowing ATVs on public roadways, sometimes limiting them to those unpaved, arguing that they are safe for ATVs. However, no studies have determined the epidemiology of ATV-related fatalities on different road surface types. The objective of the study was to compare ATV-related deaths on paved versus unpaved roads and to contrast them with off-road fatalities. Retrospective descriptive and multivariable analyses were performed using U.S. Consumer Product Safety Commission fatality data from 1982 through 2012. After 1998, ATV-related deaths increased at twice the rate on paved versus unpaved roads. Still, 42% of all roadway deaths during the study period occurred on unpaved surfaces. States varied considerably, ranging from 18% to 79% of their ATV-related roadway deaths occurring on unpaved roads. Paved road crashes were more likely than those on unpaved surfaces to involve males, adolescents and younger adults, passengers, and collisions with other vehicles. Both the pattern of other vehicles involved in collisions and which vehicle hit the other were different for the 2 road types. Alcohol use was higher, helmet use was lower, and head injuries were more likely in paved versus unpaved roadway crashes. However, head injuries still occurred in 76% of fatalities on unpaved roads. Helmets were associated with lower proportions of head injuries among riders, regardless of road surface type. Relative to off-road crashes, both paved and unpaved roads were more likely to involve collisions with another vehicle. The vast majority of roadway crashes, however, did not involve a traffic collision on either paved or unpaved roads

Using endemic road features to create self-explaining roads and reduce vehicle speeds.

Science.gov (United States)

Charlton, Samuel G; Mackie, Hamish W; Baas, Peter H; Hay, Karen; Menezes, Miguel; Dixon, Claire

2010-11-01

This paper describes a project undertaken to establish a self-explaining roads (SER) design programme on existing streets in an urban area. The methodology focussed on developing a process to identify functional road categories and designs based on endemic road characteristics taken from functional exemplars in the study area. The study area was divided into two sections, one to receive SER treatments designed to maximise visual differences between road categories, and a matched control area to remain untreated for purposes of comparison. The SER design for local roads included increased landscaping and community islands to limit forward visibility, and removal of road markings to create a visually distinct road environment. In comparison, roads categorised as collectors received increased delineation, addition of cycle lanes, and improved amenity for pedestrians. Speed data collected 3 months after implementation showed a significant reduction in vehicle speeds on local roads and increased homogeneity of speeds on both local and collector roads. The objective speed data, combined with residents' speed choice ratings, indicated that the project was successful in creating two discriminably different road categories. 2010 Elsevier Ltd. All rights reserved.

Road safety performance indicators for the interurban road network.

Science.gov (United States)

Yannis, George; Weijermars, Wendy; Gitelman, Victoria; Vis, Martijn; Chaziris, Antonis; Papadimitriou, Eleonora; Azevedo, Carlos Lima

2013-11-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The objective of this research is the development of an SPI for the road network, to be used as a benchmark for cross-region comparisons. The developed SPI essentially makes a comparison of the existing road network to the theoretically required one, defined as one which meets some minimum requirements with respect to road safety. This paper presents a theoretical concept for the determination of this SPI as well as a translation of this theory into a practical method. Also, the method is applied in a number of pilot countries namely the Netherlands, Portugal, Greece and Israel. The results show that the SPI could be efficiently calculated in all countries, despite some differences in the data sources. In general, the calculated overall SPI scores were realistic and ranged from 81 to 94%, with the exception of Greece where the SPI was relatively lower (67%). However, the SPI should be considered as a first attempt to determine the safety level of the road network. The proposed method has some limitations and could be further improved. The paper presents directions for further research to further develop the SPI. Copyright © 2012 Elsevier Ltd. All rights reserved.

Road density

Data.gov (United States)

U.S. Environmental Protection Agency — Road density is generally highly correlated with amount of developed land cover. High road densities usually indicate high levels of ecological disturbance. More...

Road accident rates: strategies and programmes for improving road traffic safety.

Science.gov (United States)

Goniewicz, K; Goniewicz, M; Pawłowski, W; Fiedor, P

2016-08-01

Nowadays, the problem of road accident rates is one of the most important health and social policy issues concerning the countries in all continents. Each year, nearly 1.3 million people worldwide lose their life on roads, and 20-50 million sustain severe injuries, the majority of which require long-term treatment. The objective of the study was to identify the most frequent, constantly occurring causes of road accidents, as well as outline actions constituting a basis for the strategies and programmes aiming at improving traffic safety on local and global levels. Comparative analysis of literature concerning road safety was performed, confirming that although road accidents had a varied and frequently complex background, their causes have changed only to a small degree over the years. The causes include: lack of control and enforcement concerning implementation of traffic regulation (primarily driving at excessive speed, driving under the influence of alcohol, and not respecting the rights of other road users (mainly pedestrians and cyclists), lack of appropriate infrastructure and unroadworthy vehicles. The number of fatal accidents and severe injuries, resulting from road accidents, may be reduced through applying an integrated approach to safety on roads. The strategies and programmes for improving road traffic should include the following measures: reducing the risk of exposure to an accident, prevention of accidents, reduction in bodily injuries sustained in accidents, and reduction of the effects of injuries by improvement of post-accident medical care.

Demonstrating a correlation between the maturity of road safety practices and road safety incidents.

Science.gov (United States)

Amador, Luis; Willis, Christopher Joseph

2014-01-01

The objective of this study is to demonstrate a correlation between the maturity of a country's road safety practices and road safety incidents. Firstly, data on a number of road injuries and fatalities for 129 countries were extracted from the United Nations Global Status on Road Safety database. These data were subdivided according to road safety incident and accident causation factors and normalized based on vehicular fleet (per 1000 vehicles) and road network (per meter of paved road). Secondly, a road safety maturity model was developed based on an adaptation of the concept of process maturity modeling. The maturity of countries with respect to 10 road safety practices was determined through the identification of indicators recorded in the United Nations Global Status of Road Safety Database. Plots of normalized road safety performance of the 129 countries against their maturity scores for each road safety practice as well as an aggregation of the road safety practices were developed. An analysis of variance was done to determine the extent of the correlation between the road safety maturity of the countries and their performance. In addition, a full Bayesian analysis was done to confirm the correlation of each of the road safety practices with injuries and fatalities. Regression analysis for fatalities, injuries, and combined accidents identified maturity with respect to road safety practices associated with speed limits and use of alternative modes as being the most significant predictors of traffic fatalities. A full Bayesian regression confirms that there is a correlation between the maturity of road safety practices and road safety incidents. Road safety practices associated with enforcement of speed limits and promotion of alternative modes are the most significant road safety practices toward which mature countries have concentrated their efforts, resulting in a lower frequency of fatalities, injury rates, and property damage accidents. The authors

Road traffic injury on rural roads in Tanzania: measuring the effectiveness of a road safety program.

Science.gov (United States)

Zimmerman, Karen; Jinadasa, Deepani; Maegga, Bertha; Guerrero, Alejandro

2015-01-01

Road traffic injuries (RTIs) are a major public health burden, especially in low- and middle-income countries. There is limited data on RTIs in low-volume, rural African settings. This study attempted to survey all individuals living in households within 200 m of two low-volume rural roads in Tanzania and to collect data on RTIs. Local communities and users of the Bago to Talawanda road (intervention site) and Kikaro to Mihuga road (control site) were targeted and received an intensive program of road safety measures tailored using the crash characteristics of the baseline sample. Demographic data on all household members were collected, and those individuals who suffered an RTI in the previous 3 months had comprehensive information collected about the crash characteristics and the socioeconomic impact. The follow-up data collection occurred nine months after the baseline data were collected. The majority of crashes that caused an RTI involved a motorcycle (71%) and the majority of victims were male (82%) with an average age of 27. Injuries to the legs (55%) were most common and the average length of time away from normal activity was 27 (±33) days. RTI incidence at the intervention site increased during the course of the study (incidence before vs. incidence after) and was unchanged in the community control (incidence before vs. incidence after). The incidence of RTIs in the low-volume rural setting is unacceptably high and most commonly associated with motorcycles. The change in incidence is unreliable due to logistic restraints of the project and more research is needed to quantify the impact of various RTI prevention strategies in this setting. This study provides insight into road traffic injuries on low-volume rural roads, areas where very little research has been captured. Additionally, it provides a replicable study design for those interested in collecting similar data on low-volume rural roads.

Solar Thermal energy strategic road-map

International Nuclear Information System (INIS)

Hafner, Bernd; Godin, Olivier; Villier, Dominique; Petit, J.F.; Demangeon, Elsa; Laplagne, Valerie; Loyen, Richard; Mugnier, Daniel; Filloux, Alain; Frichet, Jean-Claude; Aubert, Elisabeth; Cherepanova, Margarita; Guilmin, Audrey; Dicostanzo, Catherine; Papillon, Philippe; Caccavelli, Dominique; Cholin, Xavier; Leger, Emmanuel; Gevaudan, Alain; Coulaud, Celine; Morlot, Rodolphe; Khebchache, Bouzid; Parrouffe, Jean-Michel; Clement, Daniel; Tonnet, Nicolas

2012-11-01

The French Environment and Energy Management Agency (ADEME) manages a fund dedicated to new energy technologies. Since 2008 this fund has funded 'research demonstrators' to implement testing of technologies that are in an experimental stage, between research and industrial deployment. ADEME coordinates a group of experts who are charged with drawing up a strategic road-map prior to each Call for Expressions of Interest. The aims of the solar thermal road-map are: - to highlight the industrial, technological, environmental and societal issues at stake; - to elaborate coherent, consistent and shared visions of the technologies and/or socio-technical systems outlined in the road-map; - to underscore the technological, organisational and socioeconomic barriers and bottlenecks to be overcome in order to achieve these visions; - to link priority research topics to a timetable of goals for technology availability and deployment that is consistent with the stated objectives; - to give priority to research needs and research demonstrators that will serve as the basis for: 1 - calls for expression of interest issued by the Research Demonstrators Fund, 2 - the research programming process at ADEME and more broadly at the Agence nationale de la recherche (ANR) and the Comite strategique national sur la recherche sur l'energie. Research priorities and needs for demonstrators are determined by the intersection of visions and bottlenecks. They also take into account industrial and research capacity in France. The road-maps may also refer to exemplary research demonstrators abroad that are in the forefront of technological progress, and make recommendations regarding industrial policy. These road-maps are the result of collective work by a group of experts appointed by the Steering Committee (Comite de pilotage, COPIL) of the Research Demonstrators Fund for new energy technologies. The members of this group are actors in research, drawn from industry, research bodies and research

Gravel roads management : volume 1, gravel roads management.

Science.gov (United States)

2010-10-01

This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...

Comparative analysis of the performance of One-Way and Two-Way urban road networks

Science.gov (United States)

Gheorghe, Carmen

2017-10-01

The fact that the number of vehicles is increasing year after year represents a challenge in road traffic management because it is necessary to adjust the road traffic, in order to prevent any incidents, using mostly the same road infrastructure. At this moment one-way road network provides efficient traffic flow for vehicles but it is not ideal for pedestrians. Therefore, a proper solution must be found and applied when and where it is necessary. Replacing one-way road network with two-way road network may be a viable solution especially if in the area is high pedestrian traffic. The paper aims to highlight the influence of both, one-way and two-way urban road networks through an experimental research which was performed by using traffic data collected in the field. Each of the two scenarios analyzed were based on the same traffic data, the same geometrical conditions of the road (lane width, total road segment width, road slopes, total length of the road network) and also the same signaling conditions (signalised intersection or roundabout). The analysis which involves two-way scenario reveals changes in the performance parameters like delay average, stops average, delay stop average and vehicle speed average. Based on the values obtained, it was possible to perform a comparative analysis between the real, one-way, scenario and the theoretical, two-way, scenario.

Sustainable road safety: a new (?) neighbourhood road pattern that saves VRU lives.

Science.gov (United States)

Wei, Vicky Feng; Lovegrove, Gord

2012-01-01

Both the UN (2007) and World Health Organizations (2004) have declared the enormous social and economic burden imposed on society by injuries due to road collisions as a major global problem. While the road safety problem is not new, this prominent global declaration sends an important signal of frustration regarding progress to date on reducing road collisions. It is clear that governments, communities, businesses and the public must discover ways of reducing this burden, especially as it relates to vulnerable road users (VRUs), typically meaning pedestrian and bicyclist road users. Recent comparisons of global VRU collisions statistics suggest that, in addition to mixed land use density, the layout of neighbourhood roads plays a vital role in the encouragement of walkable, safe and quiet, yet accessible and sustainable communities. The purpose of this paper was to: The Dutch Sustainable Road Safety (SRS) Program has produced a number of innovative land use and transportation initiatives for vehicular road users as well as non-vehicular VRUs. Following from the Dutch initiatives, these new 3-way offset, and fused grid neighbourhood patterns appear to not only have positive effects in encouraging mode split (i.e. increasing walking and bicycling, and transit), slowing traffic, and reducing energy consumption and GHG emissions; but also, to hold potential to improve road safety. To test the road safety hypothesis, UBCO researchers evaluated the level of road safety relative to five neighbourhood patterns - grid, culs-de-sac, and Dutch Sustainable Road Safety (SRS) (or limited access), 3-way offset, and fused grid networks. Analysis using standard transportation planning methodology revealed that they would maintain both mobility and accessibility. Analysis using standard road safety analysis methodology further revealed that these 3-way offset, and fused grid patterns would significantly improve road safety levels by as much as 60% compared to prevalent patterns (i

Road Closures

Data.gov (United States)

Montgomery County of Maryland — This is an up to date map of current road closures in Montgomery County.This dataset is updated every few minutes from the Department of Transportation road closure...

Estimation of road profile variability from measured vehicle responses

Science.gov (United States)

Fauriat, W.; Mattrand, C.; Gayton, N.; Beakou, A.; Cembrzynski, T.

2016-05-01

When assessing the statistical variability of fatigue loads acting throughout the life of a vehicle, the question of the variability of road roughness naturally arises, as both quantities are strongly related. For car manufacturers, gathering information on the environment in which vehicles evolve is a long and costly but necessary process to adapt their products to durability requirements. In the present paper, a data processing algorithm is proposed in order to estimate the road profiles covered by a given vehicle, from the dynamic responses measured on this vehicle. The algorithm based on Kalman filtering theory aims at solving a so-called inverse problem, in a stochastic framework. It is validated using experimental data obtained from simulations and real measurements. The proposed method is subsequently applied to extract valuable statistical information on road roughness from an existing load characterisation campaign carried out by Renault within one of its markets.

Construction of Three-Dimensional Road Surface and Application on Interaction between Vehicle and Road

Directory of Open Access Journals (Sweden)

Lu Yongjie

2018-01-01

Full Text Available The quantitative description is given to three-dimensional micro and macro self-similar characteristics of road surface from the perspective of fractal geometry using FBM stochastic midpoint displacement and diamond-square algorithm in conjunction with fractal characteristics and statistical characteristics of standard pavement determined by estimation method of box-counting dimension. The comparative analysis between reconstructed three-dimensional road surface spectrum and theoretical road surface spectrum and correlation coefficient demonstrate the high reconstruction accuracy of fractal reconstructed road spectrum. Furthermore, the bump zone is taken as an example to reconstruct a more arbitrary 3D road model through isomorphism of special road surface with stochastic road surface model. Measurement is taken to assume the tire footprint on road surface to be a rectangle, where the pressure distribution is expressed with mean stiffness, while the contact points in the contact area are replaced with a number of springs. Two-DOF vehicle is used as an example to analyze the difference between three-dimensional multipoint-and-plane contact and traditional point contact model. Three-dimensional road surface spectrum provides a more accurate description of the impact effect of tire on road surface, thereby laying a theoretical basis for studies on the dynamical process of interaction of vehicle-road surface and the road friendliness.

The effects of peer influence on adolescent pedestrian road-crossing decisions.

Science.gov (United States)

Pfeffer, K; Hunter, E

2013-01-01

Adolescence is a high-risk period for pedestrian injury. It is also a time of heightened susceptibility to peer influence. The aim of this research was to examine the effects of peer influence on the pedestrian road-crossing decisions of adolescents. Using 10 videos of road-crossing sites, 80 16- to 18-year-olds were asked to make pedestrian road-crossing decisions. Participants were assigned to one of 4 experimental conditions: negative peer (influencing unsafe decisions), positive peer (influencing cautious decisions), silent peer (who observed but did not comment), and no peer (the participant completed the task alone). Peers from the adolescent's own friendship group were recruited to influence either an unsafe or a cautious decision. Statistically significant differences were found between peer conditions. Participants least often identified safe road-crossing sites when accompanied by a negative peer and more frequently identified dangerous road-crossing sites when accompanied by a positive peer. Both cautious and unsafe comments from a peer influenced adolescent pedestrians' decisions. These findings showed that road-crossing decisions of adolescents were influenced by both unsafe and cautious comments from their peers. The discussion highlighted the role that peers can play in both increasing and reducing adolescent risk-taking.

Retrieval Algorithms for Road Surface Modelling Using Laser-Based Mobile Mapping

Directory of Open Access Journals (Sweden)

Antero Kukko

2008-09-01

Full Text Available Automated processing of the data provided by a laser-based mobile mapping system will be a necessity due to the huge amount of data produced. In the future, vehiclebased laser scanning, here called mobile mapping, should see considerable use for road environment modelling. Since the geometry of the scanning and point density is different from airborne laser scanning, new algorithms are needed for information extraction. In this paper, we propose automatic methods for classifying the road marking and kerbstone points and modelling the road surface as a triangulated irregular network. On the basis of experimental tests, the mean classification accuracies obtained using automatic method for lines, zebra crossings and kerbstones were 80.6%, 92.3% and 79.7%, respectively.

Road rage and road traffic accidents among commercial vehicle drivers in Lahore, Pakistan.

Science.gov (United States)

Shaikh, M A; Shaikh, I A; Siddiqui, Z

2012-04-01

Road rage and road traffic accidents increase the burden of morbidity and mortality in a population. A cross-sectional survey with convenience sampling was conducted among commercial vehicle drivers in Lahore, Pakistan (n = 901) to record their behaviours/experiences regarding road rage and road traffic accidents. Respondents were asked about incidents of shouting/cursing/rude gestures or threats to physically hurt the person/vehicle, by others or themselves, in the previous 24 hours or 3 months, and their involvement in road traffic accidents in the previous 12 months. Auto-rickshaw drivers were significantly more likely to report various road rage experiences/behaviours and involvement in accidents compared with bus and wagon drivers. A total of 112 respondents (12.4%) reported being involved in a road traffic accident in the previous 12 months but traffic police did not record the accident in 52.7% of cases. The results of this study underline the need to improve road safety in Pakistan.

Integrated use of spatial and semantic relationships for extracting road networks from floating car data

Science.gov (United States)

Li, Jun; Qin, Qiming; Xie, Chao; Zhao, Yue

2012-10-01

The update frequency of digital road maps influences the quality of road-dependent services. However, digital road maps surveyed by probe vehicles or extracted from remotely sensed images still have a long updating circle and their cost remain high. With GPS technology and wireless communication technology maturing and their cost decreasing, floating car technology has been used in traffic monitoring and management, and the dynamic positioning data from floating cars become a new data source for updating road maps. In this paper, we aim to update digital road maps using the floating car data from China's National Commercial Vehicle Monitoring Platform, and present an incremental road network extraction method suitable for the platform's GPS data whose sampling frequency is low and which cover a large area. Based on both spatial and semantic relationships between a trajectory point and its associated road segment, the method classifies each trajectory point, and then merges every trajectory point into the candidate road network through the adding or modifying process according to its type. The road network is gradually updated until all trajectories have been processed. Finally, this method is applied in the updating process of major roads in North China and the experimental results reveal that it can accurately derive geometric information of roads under various scenes. This paper provides a highly-efficient, low-cost approach to update digital road maps.

ENHANCEMENT OF ROAD SAFETY THROUGH MORE EFFECTIVE ROAD AND TRAFFIC MANAGEMENT

Directory of Open Access Journals (Sweden)

Tomasz SZCZURASZEK

2016-07-01

Full Text Available To make the policy aimed at mitigating the risk of road incidents more effective, Poland should see the introduction of the more efficient road and traffic management. In November 2008 the European Parliament and the European Council published the Directive on "infrastructure safety management" which provides guidance on the procedures for carrying impact assessments of traffic safety, traffic safety audits, safety management on the road network and monitoring traffic safety in Member States. In this article, the authors have proposed a systemic approach to road and traffic management, involving the implementation of consistent procedures that should include regular revisions of roads, eliminating hazardous sites, speed management, as well as the approval and implementation of traffic organization designs.

Industrial wind. Strategic Road-map

International Nuclear Information System (INIS)

Therond, Pierre-Guy; Le Tirant, Alain; Vergnet, Marc; Hita-Perona, Sebastien; Bonnefond, Thierry; Guignard, Jean-Philippe; Roudil, Jean-Philippe; Villageois, Jean-Remy; Meyronneinc, Jean-Paul; Hua, Xavier; Herlaut, Fabienne; Maurel, Olivier; Boulnois, Renald; Lapeyre, Dominique; Mairet, Franck; Bongrain, Marie-Pierre; Kariniotakis, Georges; Rapin, Marc

2012-06-01

Since 2010, the ADEME has been managing four programmes within the scope of 'Future Investments'. Groups of research experts from various industrial fields, research bodies and research programming and financing agencies are responsible, within the scope of collective works, for producing strategic road-maps. These are used to launch Calls for Expressions of Interest (CEI). With regard to wind energy, the purpose of this road-map is to: - Highlight the industrial, technological, environmental and societal challenges encountered in the development of 'Industrial Wind'; - Draw up middle and long-term coherent, shared visions of the socio-technical systems or technologies in question; - Identify the technological, organisational, environmental and socio-economic obstacles, and therefore initiate (or pursue) the development of high-performance and economically viable technologies; - Promote the research, development and demonstration requirements ('technological demonstrators' to validate innovative technological solutions), experimentation requirements and technology platforms to be deployed ('pilot' projects to be tested under real circumstances: 'pre-commercial' unit prototypes then 'pre-commercial pilot farms') to improve the competitiveness of offers and companies within this sector, to reach the ambitious objectives set within the framework of the Grenelle Environnement and to promote and support the development of a French wind energy industry. These needs can then act as a basis for: - drawing up CEIs; - programming research within the ADEME and other institutions such as the Agence nationale de la recherche (ANR - French National Research Agency), the Comite strategique national sur la recherche energie (French national strategic committee for energy research) and the Alliance nationale de coordination de la recherche pour l'energie (ANCRE - French national alliance for the coordination of energy research). These research and experimentation priorities

Wildlife friendly roads: the impacts of roads on wildlife in urban areas and potential remedies

Science.gov (United States)

Riley, Seth P D; Brown, Justin L.; Sikich, Jeff A.; Schoonmaker, Catherine M.; Boydston, Erin E.

2014-01-01

Roads are one of the most important factors affecting the ability of wildlife to live and move within an urban area. Roads physically replace wildlife habitat and often reduce habitat quality nearby, fragment the remaining habitat, and cause increased mortality through vehicle collisions. Much ecological research on roads has focused on whether animals are successfully crossing roads, or if the road is a barrier to wildlife movement, gene flow, or functional connectivity. Roads can alter survival and reproduction for wildlife, even among species such as birds that cross roads easily. Here we examine the suite of potential impacts of roads on wildlife, but we focus particularly on urban settings. We report on studies, both in the literature and from our own experience, that have addressed wildlife and roads in urban landscapes. Although road ecology is a growing field of study, relatively little of this research, and relatively few mitigation projects, have been done in urban landscapes. We also draw from the available science on road impacts in rural areas when urban case studies have not fully addressed key topics.

Visibility of road markings on wet road surfaces : a literature study.

NARCIS (Netherlands)

Schreuder, D.A.

1981-01-01

The English version of B 14153 is presented. Road markings, notably lane markers, are often only poorly visible when the road is wet. This is particularly a problem at night on unlit roads. A study is made of whether a solution for this problem can be found on the basis of the known, published

Access road reclamation

International Nuclear Information System (INIS)

Manson, T.; Blok, M.

1997-01-01

A general review of the measures involved in restoring abandoned access road sites in British Columbia was presented. Permits and licences are needed for the use of crown land for roads used by the petroleum and natural gas industry for exploration activities. However, the regulatory framework for road site reclamation is not well developed. The nature of access road reclamation is very site-specific. Some of the issues that are considered for all reclamation projects include slope stability, water control, revegetation, soil rehabilitation, access management and monitoring. The primary objective of reclaiming access road sites is to return the site to conditions that are equal or better than pre-disturbance conditions. Restoration measures must be approved by BC Environment and by the Department of Fisheries and Oceans where federal fisheries responsibilities are involved. 54 refs., 5 tabs., 3 figs

Armenia - Rural Road Rehabilitation

Data.gov (United States)

Millennium Challenge Corporation — The key research questions guiding our design of the RRRP evaluation are: • Did rehabilitating roads affect the quality of roads? • Did rehabilitating roads improve...

Recognition of Damaged Arrow-Road Markings by Visible Light Camera Sensor Based on Convolutional Neural Network

Directory of Open Access Journals (Sweden)

Husan Vokhidov

2016-12-01

Full Text Available Automobile driver information as displayed on marked road signs indicates the state of the road, traffic conditions, proximity to schools, etc. These signs are important to insure the safety of the driver and pedestrians. They are also important input to the automated advanced driver assistance system (ADAS, installed in many automobiles. Over time, the arrow-road markings may be eroded or otherwise damaged by automobile contact, making it difficult for the driver to correctly identify the marking. Failure to properly identify an arrow-road marker creates a dangerous situation that may result in traffic accidents or pedestrian injury. Very little research exists that studies the problem of automated identification of damaged arrow-road marking painted on the road. In this study, we propose a method that uses a convolutional neural network (CNN to recognize six types of arrow-road markings, possibly damaged, by visible light camera sensor. Experimental results with six databases of Road marking dataset, KITTI dataset, Málaga dataset 2009, Málaga urban dataset, Naver street view dataset, and Road/Lane detection evaluation 2013 dataset, show that our method outperforms conventional methods.

Recognition of Damaged Arrow-Road Markings by Visible Light Camera Sensor Based on Convolutional Neural Network.

Science.gov (United States)

Vokhidov, Husan; Hong, Hyung Gil; Kang, Jin Kyu; Hoang, Toan Minh; Park, Kang Ryoung

2016-12-16

Automobile driver information as displayed on marked road signs indicates the state of the road, traffic conditions, proximity to schools, etc. These signs are important to insure the safety of the driver and pedestrians. They are also important input to the automated advanced driver assistance system (ADAS), installed in many automobiles. Over time, the arrow-road markings may be eroded or otherwise damaged by automobile contact, making it difficult for the driver to correctly identify the marking. Failure to properly identify an arrow-road marker creates a dangerous situation that may result in traffic accidents or pedestrian injury. Very little research exists that studies the problem of automated identification of damaged arrow-road marking painted on the road. In this study, we propose a method that uses a convolutional neural network (CNN) to recognize six types of arrow-road markings, possibly damaged, by visible light camera sensor. Experimental results with six databases of Road marking dataset, KITTI dataset, Málaga dataset 2009, Málaga urban dataset, Naver street view dataset, and Road/Lane detection evaluation 2013 dataset, show that our method outperforms conventional methods.

Recognition of Damaged Arrow-Road Markings by Visible Light Camera Sensor Based on Convolutional Neural Network

Science.gov (United States)

Vokhidov, Husan; Hong, Hyung Gil; Kang, Jin Kyu; Hoang, Toan Minh; Park, Kang Ryoung

2016-01-01

Automobile driver information as displayed on marked road signs indicates the state of the road, traffic conditions, proximity to schools, etc. These signs are important to insure the safety of the driver and pedestrians. They are also important input to the automated advanced driver assistance system (ADAS), installed in many automobiles. Over time, the arrow-road markings may be eroded or otherwise damaged by automobile contact, making it difficult for the driver to correctly identify the marking. Failure to properly identify an arrow-road marker creates a dangerous situation that may result in traffic accidents or pedestrian injury. Very little research exists that studies the problem of automated identification of damaged arrow-road marking painted on the road. In this study, we propose a method that uses a convolutional neural network (CNN) to recognize six types of arrow-road markings, possibly damaged, by visible light camera sensor. Experimental results with six databases of Road marking dataset, KITTI dataset, Málaga dataset 2009, Málaga urban dataset, Naver street view dataset, and Road/Lane detection evaluation 2013 dataset, show that our method outperforms conventional methods. PMID:27999301

AN EFFICIENT METHOD FOR AUTOMATIC ROAD EXTRACTION BASED ON MULTIPLE FEATURES FROM LiDAR DATA

Directory of Open Access Journals (Sweden)

Y. Li

2016-06-01

Full Text Available The road extraction in urban areas is difficult task due to the complicated patterns and many contextual objects. LiDAR data directly provides three dimensional (3D points with less occlusions and smaller shadows. The elevation information and surface roughness are distinguishing features to separate roads. However, LiDAR data has some disadvantages are not beneficial to object extraction, such as the irregular distribution of point clouds and lack of clear edges of roads. For these problems, this paper proposes an automatic road centerlines extraction method which has three major steps: (1 road center point detection based on multiple feature spatial clustering for separating road points from ground points, (2 local principal component analysis with least squares fitting for extracting the primitives of road centerlines, and (3 hierarchical grouping for connecting primitives into complete roads network. Compared with MTH (consist of Mean shift algorithm, Tensor voting, and Hough transform proposed in our previous article, this method greatly reduced the computational cost. To evaluate the proposed method, the Vaihingen data set, a benchmark testing data provided by ISPRS for “Urban Classification and 3D Building Reconstruction” project, was selected. The experimental results show that our method achieve the same performance by less time in road extraction using LiDAR data.

An Efficient Method for Automatic Road Extraction Based on Multiple Features from LiDAR Data

Science.gov (United States)

Li, Y.; Hu, X.; Guan, H.; Liu, P.

2016-06-01

The road extraction in urban areas is difficult task due to the complicated patterns and many contextual objects. LiDAR data directly provides three dimensional (3D) points with less occlusions and smaller shadows. The elevation information and surface roughness are distinguishing features to separate roads. However, LiDAR data has some disadvantages are not beneficial to object extraction, such as the irregular distribution of point clouds and lack of clear edges of roads. For these problems, this paper proposes an automatic road centerlines extraction method which has three major steps: (1) road center point detection based on multiple feature spatial clustering for separating road points from ground points, (2) local principal component analysis with least squares fitting for extracting the primitives of road centerlines, and (3) hierarchical grouping for connecting primitives into complete roads network. Compared with MTH (consist of Mean shift algorithm, Tensor voting, and Hough transform) proposed in our previous article, this method greatly reduced the computational cost. To evaluate the proposed method, the Vaihingen data set, a benchmark testing data provided by ISPRS for "Urban Classification and 3D Building Reconstruction" project, was selected. The experimental results show that our method achieve the same performance by less time in road extraction using LiDAR data.

A research of road centerline extraction algorithm from high resolution remote sensing images

Science.gov (United States)

Zhang, Yushan; Xu, Tingfa

2017-09-01

Satellite remote sensing technology has become one of the most effective methods for land surface monitoring in recent years, due to its advantages such as short period, large scale and rich information. Meanwhile, road extraction is an important field in the applications of high resolution remote sensing images. An intelligent and automatic road extraction algorithm with high precision has great significance for transportation, road network updating and urban planning. The fuzzy c-means (FCM) clustering segmentation algorithms have been used in road extraction, but the traditional algorithms did not consider spatial information. An improved fuzzy C-means clustering algorithm combined with spatial information (SFCM) is proposed in this paper, which is proved to be effective for noisy image segmentation. Firstly, the image is segmented using the SFCM. Secondly, the segmentation result is processed by mathematical morphology to remover the joint region. Thirdly, the road centerlines are extracted by morphology thinning and burr trimming. The average integrity of the centerline extraction algorithm is 97.98%, the average accuracy is 95.36% and the average quality is 93.59%. Experimental results show that the proposed method in this paper is effective for road centerline extraction.

Road Infrastructure Safety Management in Poland

Science.gov (United States)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road

Road safety analysis on Achmad Yani frontage road Surabaya

Science.gov (United States)

Machsus; Prayogo, I.; Chomaedhi; Hayati, D. W.; Utanaka, A.

2017-11-01

This research discusses road safety analysis on the operation of frontage road on the west side of Achmad Yani Road Surabaya. This research began by conducting survey on secondary data of traffic accidents. In addition, primary data survey was conducted to obtain traffic data, geometric road data, and other supporting data at the study site along the west side frontage of Ahmad Yani Road Surabaya. Devices used in this research include camera, handy cam, speed gun, counters of vehicles, rolling meter, computer and others. In outline, the stages to conduct this research are divided into 4 stages, namely 1.the preparation stage, 2.data collection and processing, 3. analysis and discussion, and 4. conclusion. The results of this study showed that the accident characteristics of the frontage road are (i) 3 accidents occured per month, (ii) motorcycles was accounted for the largest proportion of accidents which amounted to 74.6 percent, (iii) there were 3 accident victims per month, and (iv) material losses per month worths 1.2 million. The accident rate in 2016 was 0.04 crashes per one million vehicle travels per kilometer, while during 2 months in 2017 it was 0.15 accidents per one million vehicle travels per kilometer. Black spot area of accident is located on Sta 2 + 800 to 2 + 900 which is in front of Graha Pena building and DBL Arena. The high rate of accidents is influenced by the speed of the vehicle which 85 percentile exceeds the speed limit of 40km per hour.

Road map for photovoltaic electricity

International Nuclear Information System (INIS)

2011-02-01

This road map aims at highlighting industrial, technological and social challenges, at elaborating comprehensive visions, at highlighting technological locks, and at outlining research needs for the photovoltaic sector. It considers the following sector components: preparation of photo-sensitive materials, manufacturing of photovoltaic cells, manufacturing of photovoltaic arrays, design and manufacturing of electric equipment to control photovoltaic arrays and to connect them to the grid. It highlights the demand for photovoltaic installations, analyzes the value chain, proposes a vision of the sector by 2050 and defines target for 2020, discusses needs for demonstration and experimentation

Road Accidents and Road Fatalities in Denmark from 1968 to 2004

DEFF Research Database (Denmark)

Orozova-Bekkevold, Ivanka; Hels, Tove; Bernhoft, Inger Marie

2008-01-01

The purpose of this article is to describe the road accidents and road fatalities in Denmark in the period 1968-2004. Only accidents registered by the police were used. Crude and gender & age specific fatality rates (counts per 1,000,000 inhabitants) were estimated for all road users...... and for bicyclists. The accident and fatality rates have decreased by around 70% from 1968 to 2004, while the motorisation rate has increased by approximately 90%. The sharpest decrease in the fatality rate was observed among the youngest (below 18 years old) and the older (above 64) road users. Gender related...... and actions targeted to improve road safety have indeed led to a significant reduction in injury accidents and fatalities. Further research and more detailed data, especially on traffic volume and individual exposure are necessary in order to investigate properly a causal relation between the number...

Measuring Algorithm for the Distance to a Preceding Vehicle on Curve Road Using On-Board Monocular Camera

Science.gov (United States)

Yu, Guizhen; Zhou, Bin; Wang, Yunpeng; Wun, Xinkai; Wang, Pengcheng

2015-12-01

Due to more severe challenges of traffic safety problems, the Advanced Driver Assistance Systems (ADAS) has received widespread attention. Measuring the distance to a preceding vehicle is important for ADAS. However, the existing algorithm focuses more on straight road sections than on curve measurements. In this paper, we present a novel measuring algorithm for the distance to a preceding vehicle on a curve road using on-board monocular camera. Firstly, the characteristics of driving on the curve road is analyzed and the recognition of the preceding vehicle road area is proposed. Then, the vehicle detection and distance measuring algorithms are investigated. We have verified these algorithms on real road driving. The experimental results show that this method proposed in the paper can detect the preceding vehicle on curve roads and accurately calculate the longitudinal distance and horizontal distance to the preceding vehicle.

Epidemiologic study of road traffic injuries by road user type characteristics and road environment in Iran: a community-based approach.

Science.gov (United States)

Hatamabadi, Hamidreza; Vafaee, Reza; Hadadi, Mashyaneh; Abdalvand, Ali; Esnaashari, Hamidreza; Soori, Hamid

2012-01-01

Crash injuries in traffic accidents are affected by a variety of factors. In this study we analyzed road user type information based on different contributing factors. Data from all of the road traffic victims on a road extending from the east of the city of Tehran to Mazandaran province were included prospectively over a one-year period (May 2008 to May 2009). Data collected included the crash time, patient's age and sex, road user category, helmet or seat belt use, anatomical site of injury, Injury Severity Score (ISS), and mortality. Prevalence and cross-tabulations were included in the analysis. There were 433 patients, of whom 345 were hospitalized and 33 died either before or after arriving at the hospital. Sixty-nine percent of injured patients were vehicle occupants. Mean and median of ISS were higher for pedestrians, who accounted for 49 percent of the deaths. Head injury was the most common injury and injury to upper and lower extremities was the most common cause of admission. A significant difference in lower extremity injuries between vehicle occupants and nonoccupants was found. Sex and age group did not have a significant effect on mortality. Mortality was significantly higher in pedestrians (P road user type. Because pedestrians are the most vulnerable road users, stricter legislation and law enforcement should be used to protect them. Greater protection can also be reached by holding effective public awareness campaigns on how to use different roads safely. On the other hand, because rear seat passengers are at the same risk for road traffic injuries as front seat passengers, employment of newer laws and preventive measures targeting this group of occupants can prevent many road traffic injuries (RTIs).

Use of fatal real-life crashes to analyze a safe road transport system model, including the road user, the vehicle, and the road.

Science.gov (United States)

Stigson, Helena; Krafft, Maria; Tingvall, Claes

2008-10-01

To evaluate if the Swedish Road Administration (SRA) model for a safe road transport system, which includes the interaction between the road user, the vehicle, and the road, could be used to classify fatal car crashes according to some safety indicators. Also, to present a development of the model to better identify system weakness. Real-life crashes with a fatal outcome were classified according to the vehicle's safety rating by Euro NCAP (European Road Assessment Programme) and fitment of ESC (Electronic Stability Control). For each crash, the road was also classified according to EuroRAP (European Road Assessment Programme) criteria, and human behavior in terms of speeding, seat belt use, and driving under the influence of alcohol. Each crash was compared with the model criteria, to identify components that might have contributed to fatal outcome. All fatal crashes where a car occupant was killed that occurred in Sweden during 2004 were included: in all, 215 crashes with 248 fatalities. The data were collected from the in-depth fatal crash data of the Swedish Road Administration (SRA). It was possible to classify 93% of the fatal car crashes according to the SRA model. A number of shortcomings in the criteria were identified since the model did not address rear-end or animal collisions or collisions with stationary/parked vehicles or trailers (18 out of 248 cases). Using the further developed model, it was possible to identify that most of the crashes occurred when two or all three components interacted (in 85 of the total 230 cases). Noncompliance with safety criteria for the road user, the vehicle, and the road led to fatal outcome in 43, 27, and 75 cases, respectively. The SRA model was found to be useful for classifying fatal crashes but needs to be further developed to identify how the components interact and thereby identify weaknesses in the road traffic system. This developed model might be a tool to systematically identify which of the components are

Road Lane Detection Robust to Shadows Based on a Fuzzy System Using a Visible Light Camera Sensor.

Science.gov (United States)

Hoang, Toan Minh; Baek, Na Rae; Cho, Se Woon; Kim, Ki Wan; Park, Kang Ryoung

2017-10-28

Recently, autonomous vehicles, particularly self-driving cars, have received significant attention owing to rapid advancements in sensor and computation technologies. In addition to traffic sign recognition, road lane detection is one of the most important factors used in lane departure warning systems and autonomous vehicles for maintaining the safety of semi-autonomous and fully autonomous systems. Unlike traffic signs, road lanes are easily damaged by both internal and external factors such as road quality, occlusion (traffic on the road), weather conditions, and illumination (shadows from objects such as cars, trees, and buildings). Obtaining clear road lane markings for recognition processing is a difficult challenge. Therefore, we propose a method to overcome various illumination problems, particularly severe shadows, by using fuzzy system and line segment detector algorithms to obtain better results for detecting road lanes by a visible light camera sensor. Experimental results from three open databases, Caltech dataset, Santiago Lanes dataset (SLD), and Road Marking dataset, showed that our method outperformed conventional lane detection methods.

Defogging of road images using gain coefficient-based trilateral filter

Science.gov (United States)

Singh, Dilbag; Kumar, Vijay

2018-01-01

Poor weather conditions are responsible for most of the road accidents year in and year out. Poor weather conditions, such as fog, degrade the visibility of objects. Thus, it becomes difficult for drivers to identify the vehicles in a foggy environment. The dark channel prior (DCP)-based defogging techniques have been found to be an efficient way to remove fog from road images. However, it produces poor results when image objects are inherently similar to airlight and no shadow is cast on them. To eliminate this problem, a modified restoration model-based DCP is developed to remove the fog from road images. The transmission map is also refined by developing a gain coefficient-based trilateral filter. Thus, the proposed technique has an ability to remove fog from road images in an effective manner. The proposed technique is compared with seven well-known defogging techniques on two benchmark foggy images datasets and five real-time foggy images. The experimental results demonstrate that the proposed approach is able to remove the different types of fog from roadside images as well as significantly improve the image's visibility. It also reveals that the restored image has little or no artifacts.

Overload road damage model

CSIR Research Space (South Africa)

Roux, MP

2005-03-01

Full Text Available Not only do overloaded vehicles pose an increased safety risk on the road (reduced stability and braking efficiency etc.), but they also accelerate the rate of deterioration of the road network and increase road maintenance costs, which in turn...

The impact of road improvements on road safety and related characteristics

OpenAIRE

Francis John Gichaga

2017-01-01

This paper presents the historical and cultural background relating to road improvement and road safety characteristics in Kenya, a developing country in East Africa. Some who come from low-developed areas of developing countries often take time to comprehend the modern transportation infrastructure, especially roads, and have difficulty assimilating and customizing the same to their culturally tailored modes. This paper discusses two case studies: one on the socio-economic impact followin...

Road dust emissions from paved roads measured using different mobile systems.

Science.gov (United States)

Pirjola, Liisa; Johansson, Christer; Kupiainen, Kaarle; Stojiljkovic, Ana; Karlsson, Hans; Hussein, Tareq

2010-12-01

Very few real-world measurements of road dust suspension have been performed to date. This study compares two different techniques (referred to as Sniffer and Emma) to measure road dust emissions. The main differences between the systems are the construction of the inlet, different instruments for recording particulate matter (PM) levels, and different loads on the wheel axes (the weight of Sniffer was much higher than that of Emma). Both systems showed substantial small-scale variations of emission levels along the road, likely depending on-road surface conditions. The variations observed correlated quite well, and the discrepancies are likely a result of variations in dust load on the road surface perpendicular to the driving direction that cause variations in the measurements depending on slightly different paths driven by the two vehicles. Both systems showed a substantial influence on the emission levels depending on the type of tire used. The summer tire showed much lower suspension than the winter tires (one nonstudded and one studded). However, the relative importance of the nonstudded versus studded tire was rather different. For the ratio of studded/nonstudded, Emma shows higher values on all road sections compared with Sniffer. Both techniques showed increased emission levels with increasing vehicle speed. When the speed increased from 50 to 80 km hr(-1), the relative concentrations increased by 30-170% depending on the tire type and dust load. However, for road sections that were very dirty, Sniffer showed a much higher relative increase in the emission level with the nonstudded tire. Sniffer's absolute concentrations were mostly higher than Emma's. Possible reasons for the differences are discussed in the paper. Both systems can be used for studying relative road dust emissions and for designing air quality management strategies.

Characteristics of public roads operation

OpenAIRE

Pryimak, V.; Kyiashko, I.

2009-01-01

Characteristics of public roads operation have been considered and factors influencing TEC of public roads that go via urban areas have been determined. There have been revealed contradictions in the normative-legal base concerning maintenance of public roads and municipal roads that merge into them.

Linear stochastic evaluation of tyre vibration due to tyre/road excitation

Science.gov (United States)

Rustighi, E.; Elliott, S. J.; Finnveden, S.; Gulyás, K.; Mócsai, T.; Danti, M.

2008-03-01

Tyre/road interaction is recognised as the main source of interior and exterior noise for velocities over the 40 km/h. In this paper, a three-dimensional (3D) elemental approach has been adopted to predict the stochastic tyre vibration and hence the interior and exterior noise due to this kind of excitation. The road excitation has been modelled from the spectral density of a common road profile, supposing the road to be an isotropic surface. A linear Winkler bedding connects the 3D model of the tyre with the ground. The exterior noise has been evaluated by an elemental calculation of the radiation matrix of the tyre deformed by the static load on a concrete road. The noise inside the vehicle has also been calculated, using the transfer functions from the force transmitted to the hub and the noise inside the vehicle, which have been computed by a FEM model of a common car body. The simple formulation allows much quicker calculation than traditional nonlinear approaches, and appears to give results consistent with available measurements, although the effects of tyre rotation and of the nonlinearities in the contact model are yet to be quantified, and the method requires further experimental validation before practical application.

PHOTOGRAMMETRIC TECHNIQUES FOR ROAD SURFACE ANALYSIS

Directory of Open Access Journals (Sweden)

V. A. Knyaz

2016-06-01

Full Text Available The quality and condition of a road surface is of great importance for convenience and safety of driving. So the investigations of the behaviour of road materials in laboratory conditions and monitoring of existing roads are widely fulfilled for controlling a geometric parameters and detecting defects in the road surface. Photogrammetry as accurate non-contact measuring method provides powerful means for solving different tasks in road surface reconstruction and analysis. The range of dimensions concerned in road surface analysis can have great variation from tenths of millimetre to hundreds meters and more. So a set of techniques is needed to meet all requirements of road parameters estimation. Two photogrammetric techniques for road surface analysis are presented: for accurate measuring of road pavement and for road surface reconstruction based on imagery obtained from unmanned aerial vehicle. The first technique uses photogrammetric system based on structured light for fast and accurate surface 3D reconstruction and it allows analysing the characteristics of road texture and monitoring the pavement behaviour. The second technique provides dense 3D model road suitable for road macro parameters estimation.

Performance Assessment of Low-Noise Road Surfaces in the Leopoldo Project: Comparison and Validation of Different Measurement Methods

Directory of Open Access Journals (Sweden)

Gaetano Licitra

2015-01-01

Full Text Available In almost all urban contexts and in many extra-urban conurbations, where road traffic is the main noise pollution source, the use of barriers is not allowed. In these cases, low-noise road surfaces are the most used mitigation action together with traffic flow reduction. Selecting the optimal surface is only the first problem that the public administration has to face. In the second place, it has to consider the issue of assessing the efficacy of the mitigation action. The purpose of the LEOPOLDO project was to improve the knowledge in the design and the characterization of low-noise road surfaces, producing guidelines helpful to the public administrations. Several experimental road surfaces were tested. Moreover, several measurement methods were implemented aiming to select those that are suitable for a correct assessment of the pavement performances laid as mitigation planning. In this paper, the experience gained in the LEOPOLDO project will be described, focusing on both the measurement methods adopted to assess the performance of a low-noise road surface and the criteria by which the experimental results have to be evaluated, presenting a comparison of the obtained results and their monitoring along time.

Future Road Density

Data.gov (United States)

U.S. Environmental Protection Agency — Road density is generally highly correlated with amount of developed land cover. High road densities usually indicate high levels of ecological disturbance. More...

Experimental Evaluation of Anti-Stripping Additives Mixing in Road Surface Pavement Materials

OpenAIRE

Tienfuan Kerh; Yu-Min Wang; Yulern Lin

2005-01-01

Most road surfaces in Taiwan are paved with asphalt concrete but the phenomena of rutting, cracking and stripping of the pavement are frequently occurring due to the effects of traffic flow, thermal variation and water erosion caused by rain. In this study, a series of experiments were performed to examine the effectiveness of anti-stripping fillers, which include; rock flour, rock flour with 1% lime and rock flour with 1% cement, respectively, in the mixture of asphalt concrete. The experime...

Vehicle operation characteristic under different ramp entrance conditions in underground road: Analysis, simulation and modelling

Science.gov (United States)

Yao, Qiming; Liu, Shuo; Liu, Yang

2018-05-01

An experimental design was used to study the vehicle operation characteristics of different ramp entrance conditions in underground road. With driving simulator, the experimental scenarios include left or right ramp with first, second and third service level, respectively, to collect vehicle speed, acceleration, lateral displacement and location information at the ramp entrance section. By using paired t-test and ANOVA, the influence factors of vehicle operating characteristics are studied. The result shows that effects of ramp layout and mainline traffic environment on vehicle operation characteristics are significant. The regression model of vehicle traveling distance on acceleration lane is established. Suggestions are made for ramp entrance design of underground road.

Challenges of raising road maintenance funds in developing countries: An analysis of road tolling in Zimbabwe

Directory of Open Access Journals (Sweden)

T. C. Mbara

2010-11-01

Full Text Available The condition of Zimbabwe's roads has been declining due to insufficient maintenance and rehabilitation. Year on year, budget allocations have compared unfavourably with funding considered adequate to maintain highway networks and conduct modest construction work. Road infrastructure shortcomings have manifested themselves in the form of high vehicle operating costs and rampant potholes, leading to a decline in road safety and a deterioration of service levels for those who use roads to deliver goods or connect to international markets. In order to try and stop this vicious cycle of decline, the Government of Zimbabwe, on 8 August 2009, introduced a new policy of road-user charges, which involved the setting-up of 22 toll gates on the trunk road network. The overall objective was to raise revenue in order to close the funding gap, blamed for declining road quality. Although alternative methods of financing road maintenance have been debated for years, a generally accepted understanding is that road users should pay costs for road provisioning. This paper assesses the implementation of a road tolling system in Zimbabwe and describes matters relating to, inter alia, implementation strategy, initial performance outcomes and sustainability.

Gravel roads management : volume 2, gravel roads management : implementation guide.

Science.gov (United States)

2011-10-01

This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...

Gravel roads management : volume 3, gravel roads management : programming guide.

Science.gov (United States)

2010-10-01

This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...

VT Road Centerline

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata)(User Guide)(Symbology layer files: aotclass_only.lyr aotclass_surfacetyp.lyr)The Vermont Road Centerline data layer (TransRoad_RDS) contains all...

RoADS: A road pavement monitoring system for anomaly detection using smart phones

NARCIS (Netherlands)

Seraj, Fatjon; van der Zwaag, B.J.; Dilo, Arta; Luarasi, Tamara; Havinga, Paul J.M.; Atzmueller, Martin; Chin, Alvin; Janssen, Frederik; Schweizer, Immanuel; Trattner, Christoph

2016-01-01

Monitoring the road pavement is a challenging task. Authorities spend time and finances to monitor the state and quality of the road pavement. This paper investigate road surface monitoring with smartphones equipped with GPS and inertial sensors: accelerometer and gyroscope. In this study we

RoADS: A road pavement monitoring system for anomaly detection using smart phones

NARCIS (Netherlands)

Seraj, Fatjon; van der Zwaag, B.J.; Dilo, Arta; Luarasi, Tamara; Havinga, Paul J.M.

2014-01-01

Monitoring the road pavement is a challenging task. Authorities spend time and finances to monitor the state and quality of the road pavement. This paper investigate road surface monitoring with smartphones equipped with GPS and inertial sensors: accelerometer and gyroscope. In this study we

Performance standards of road safety management

Directory of Open Access Journals (Sweden)

Čabarkapa Milenko R.

2016-01-01

Full Text Available Road safety management controlling means the process of finding out the information whether the road safety is improving in a measure to achieve the objectives. The process of control consists of three basic elements: definition of performances and standards, measurement of current performances and comparison with the set standards, and improvement of current performances, if they deviate from the set standards. The performance standards of road safety management system are focused on a performances measurement, in terms of their design and characteristics, in order to support the performances improvement of road safety system and thus, ultimately, improve the road safety. Defining the performance standards of road safety management system, except that determines the design of the system for performances measurement, directly sets requirements whose fulfillment will produce a road safety improvement. The road safety management system, based on the performance standards of road safety, with a focus on results, will produce the continuous improvement of road safety, achieving the long-term 'vision zero', the philosophy of road safety, that human life and health take priority over mobility and other traffic objectives of the road traffic.

Estimation of Road Friction Coefficient in Different Road Conditions Based on Vehicle Braking Dynamics

Science.gov (United States)

Zhao, You-Qun; Li, Hai-Qing; Lin, Fen; Wang, Jian; Ji, Xue-Wu

2017-07-01

The accurate estimation of road friction coefficient in the active safety control system has become increasingly prominent. Most previous studies on road friction estimation have only used vehicle longitudinal or lateral dynamics and often ignored the load transfer, which tends to cause inaccurate of the actual road friction coefficient. A novel method considering load transfer of front and rear axles is proposed to estimate road friction coefficient based on braking dynamic model of two-wheeled vehicle. Sliding mode control technique is used to build the ideal braking torque controller, which control target is to control the actual wheel slip ratio of front and rear wheels tracking the ideal wheel slip ratio. In order to eliminate the chattering problem of the sliding mode controller, integral switching surface is used to design the sliding mode surface. A second order linear extended state observer is designed to observe road friction coefficient based on wheel speed and braking torque of front and rear wheels. The proposed road friction coefficient estimation schemes are evaluated by simulation in ADAMS/Car. The results show that the estimated values can well agree with the actual values in different road conditions. The observer can estimate road friction coefficient exactly in real-time and resist external disturbance. The proposed research provides a novel method to estimate road friction coefficient with strong robustness and more accurate.

Road grip test in Arjeplog

OpenAIRE

Engström, Niclas; Andrén, Henrik; Nybacka, Mikael; Fransson, Lennart; Larsson, Roland

2008-01-01

The Swedish road administration sees a need to improve the road grip estimation capacity for the Swedish road system. The challenge is to find methods to measure road grip fast and reliable. There where six different system types at the tests in Arjeplog, three continuous, two system measuring road grip through deceleration and one system based on GPS and accelerometers. Two system types used air craft runway tires. The other systems used either studded winter tires or friction winter tires. ...

A theoretical study for the propagation of rolling noise over a porous road pavement

Science.gov (United States)

Keung Lui, Wai; Ming Li, Kai

2004-07-01

A simplified model based on the study of sound diffracted by a sphere is proposed for investigating the propagation of noise in a hornlike geometry between porous road surfaces and rolling tires. The simplified model is verified by comparing its predictions with the published numerical and experimental results of studies on the horn amplification of sound over a road pavement. In a parametric study, a point monopole source is assumed to be localized on the surface of a tire. In the frequency range of interest, a porous road pavement can effectively reduce the level of amplified sound due to the horn effect. It has been shown that an increase in the thickness and porosity of a porous layer, or the use of a double layer of porous road pavement, attenuates the horn amplification of sound. However, a decrease in the flow resistivity of a porous road pavement does little to reduce the horn amplification of sound. It has also been demonstrated that the horn effect over a porous road pavement is less dependent on the angular position of the source on the surface of tires.

Conceptual design and analysis of roads and road construction machinery for initial lunar base operations

Science.gov (United States)

Sines, Jeffrey L.; Banks, Joel; Efatpenah, Keyanoush

1990-01-01

Recent developments have made it possible for scientists and engineers to consider returning to the Moon to build a manned lunar base. The base can be used to conduct scientific research, develop new space technology, and utilize the natural resources of the Moon. Areas of the base will be separated, connected by a system of roads that reduce the power requirements of vehicles traveling on them. Feasible road types for the lunar surface were analyzed and a road construction system was designed for initial lunar base operations. A model was also constructed to show the system configuration and key operating features. The alternate designs for the lunar road construction system were developed in four stages: analyze and select a road type; determine operations and machinery needed to produce the road; develop machinery configurations; and develop alternates for several machine components. A compacted lunar soil road was selected for initial lunar base operations. The only machinery required to produce this road were a grader and a compactor. The road construction system consists of a main drive unit which is used for propulsion, a detachable grader assembly, and a towed compactor.

Roads Near Streams

Data.gov (United States)

U.S. Environmental Protection Agency — Roads are a source of auto related pollutants (e.g. gasoline, oil and other engine fluids). When roads are near streams, rain can wash these pollutants directly into...

Influence of Sampling Effort on the Estimated Richness of Road-Killed Vertebrate Wildlife

Science.gov (United States)

Bager, Alex; da Rosa, Clarissa A.

2011-05-01

Road-killed mammals, birds, and reptiles were collected weekly from highways in southern Brazil in 2002 and 2005. The objective was to assess variation in estimates of road-kill impacts on species richness produced by different sampling efforts, and to provide information to aid in the experimental design of future sampling. Richness observed in weekly samples was compared with sampling for different periods. In each period, the list of road-killed species was evaluated based on estimates the community structure derived from weekly samplings, and by the presence of the ten species most subject to road mortality, and also of threatened species. Weekly samples were sufficient only for reptiles and mammals, considered separately. Richness estimated from the biweekly samples was equal to that found in the weekly samples, and gave satisfactory results for sampling the most abundant and threatened species. The ten most affected species showed constant road-mortality rates, independent of sampling interval, and also maintained their dominance structure. Birds required greater sampling effort. When the composition of road-killed species varies seasonally, it is necessary to take biweekly samples for a minimum of one year. Weekly or more-frequent sampling for periods longer than two years is necessary to provide a reliable estimate of total species richness.

Driving and off-road impairments underlying failure on road testing in Parkinson's disease.

Science.gov (United States)

Devos, Hannes; Vandenberghe, Wim; Tant, Mark; Akinwuntan, Abiodun E; De Weerdt, Willy; Nieuwboer, Alice; Uc, Ergun Y

2013-12-01

Parkinson's disease (PD) affects driving ability. We aimed to determine the most critical impairments in specific road skills and in clinical characteristics leading to failure on a road test in PD. In this cross-sectional study, certified driving assessment experts evaluated specific driving skills in 104 active, licensed drivers with PD using a standardized, on-road checklist and issued a global decision of pass/fail. Participants also completed an off-road evaluation assessing demographic features, disease characteristics, motor function, vision, and cognition. The most important driving skills and off-road predictors of the pass/fail outcome were identified using multivariate stepwise regression analyses. Eighty-six (65%) passed and 36 (35%) failed the on-road driving evaluation. Persons who failed performed worse on all on-road items. When adjusted for age and gender, poor performances on lateral positioning at low speed, speed adaptations at high speed, and left turning maneuvers yielded the best model that determined the pass/fail decision (R(2) = 0.56). The fail group performed poorer on all motor, visual, and cognitive tests. Measures of visual scanning, motor severity, PD subtype, visual acuity, executive functions, and divided attention were independent predictors of pass/fail decisions in the multivariate model (R(2) = 0.60). Our study demonstrated that failure on a road test in PD is determined by impairments in specific driving skills and associated with deficits in motor, visual, executive, and visuospatial functions. These findings point to specific driving and off-road impairments that can be targeted in multimodal rehabilitation programs for drivers with PD. © 2013 Movement Disorder Society.

Road pricing, air pollution and external costs; Road pricing, luftforurening og eksternalitetsomkostninger

Energy Technology Data Exchange (ETDEWEB)

Solvang Jensen, S.; Ketzel, M. (Aarhus Univ., Danmarks Miljoeundersoegelser, Afd. for Atmosfaerisk Miljoe, Roskilde (Denmark)); Skou Andersen, M. (Aarhus Univ., Danmarks Miljoeundersoegelser, Afd. for Systemanalyse, Roskilde (Denmark))

2010-06-15

The objective of this assessment is to improve the foundation for decision-making about introduction of a road pricing system that aims to reduce the health impacts and social costs of traffic-related air pollution. The analysis focuses on how road emissions, air quality, population exposure, and social costs of air pollution depend on geography (different city sizes and rural areas) and time of the day (rush hours versus non-rush hours). A review of Danish studies related to road pricing has also been carried out to assess the expected effect of road pricing on traffic performance (km travelled), vehicle composition and speed that are factors affecting air pollution. (LN)

Road safety and road traffic accidents in Saudi Arabia

Science.gov (United States)

Mansuri, Farah A.; Al-Zalabani, Abdulmohsen H.; Zalat, Marwa M.; Qabshawi, Reem I.

2015-01-01

Objectives: To identify the changing trends and crucial preventive approaches to road traffic accidents (RTAs) adopted in the Kingdom of Saudi Arabia (KSA) over the last 2.5 decades, and to analyze aspects previously overlooked. Methods: This systematic review was based on evidence of RTAs in KSA. All articles published during the last 25 years on road traffic accident in KSA were analyzed. This study was carried out from December 2013 to May 2014 in the Department of Family and Community Medicine, Taibah University, Al-Madinah Al-Munawwarah, KSA. Results: Road traffic accidents accounted for 83.4% of all trauma admissions in 1984-1989, and no such overall trend was studied thereafter. The most frequently injured body regions as reported in the latest studies were head and neck, followed by upper and lower extremities, which was found to be opposite to that of the studies reported earlier. Hospital data showed an 8% non-significant increase in road accident mortalities in contrast to police records of a 27% significant reduction during the years 2005-2010. Excessive speeding was the most common cause reported in all recent and past studies. Conclusion: Disparity was common in the type of reporting of RTAs, outcome measures, and possible causes over a period of 2.5 decade. All research exclusively looked into the drivers’ faults. A sentinel surveillance of road crashes should be kept in place in the secondary and tertiary care hospitals for all regions of KSA. PMID:25828277

Road traffic noise: self-reported noise annoyance versus GIS modelled road traffic noise exposure.

Science.gov (United States)

Birk, Matthias; Ivina, Olga; von Klot, Stephanie; Babisch, Wolfgang; Heinrich, Joachim

2011-11-01

self-reported road traffic noise annoyance is commonly used in epidemiological studies for assessment of potential health effects. Alternatively, some studies have used geographic information system (GIS) modelled exposure to road traffic noise as an objective parameter. The aim of this study was to analyse the association between noise exposure due to neighbouring road traffic and the noise annoyance of adults, taking other determinants into consideration. parents of 951 Munich children from the two German birth cohorts GINIplus and LISAplus reported their annoyance due to road traffic noise at home. GIS modelled road traffic noise exposure (L(den), maximum within a 50 m buffer) from the noise map of the city of Munich was available for all families. GIS-based calculated distance to the closest major road (≥10,000 vehicles per day) and questionnaire based-information about family income, parental education and the type of the street of residence were explored for their potential influence. An ordered logit regression model was applied. The noise levels (L(den)) and the reported noise annoyance were compared with an established exposure-response function. the correlation between noise annoyance and noise exposure (L(den)) was fair (Spearman correlation r(s) = 0.37). The distance to a major road and the type of street were strong predictors for the noise annoyance. The annoyance modelled by the established exposure-response function and that estimated by the ordered logit model were moderately associated (Pearson's correlation r(p) = 0.50). road traffic noise annoyance was associated with GIS modelled neighbouring road traffic noise exposure (L(den)). The distance to a major road and the type of street were additional explanatory factors of the noise annoyance appraisal.

FEATURES ROAD SAFETY AUDIT

Directory of Open Access Journals (Sweden)

L. Abramova

2015-07-01

Full Text Available Development of the road network, increasing motorization of the population significantly increase the risk of accidents. Experts in the field of traffic are developing methods to reduce the probability of accidents. The ways of solving the problems of road safety audit at various stages of the «life» of roads are considered.

a Study of Radial Vibrations of a Rolling Tyre for TYRE-ROAD Noise Characterisation

Science.gov (United States)

Périsse, J.

2002-11-01

Because tyre-road noise represents the main noise source for light vehicles with driving speed above 60 km/h, comprehension of generation mechanism of tyre-road noise has become a subject of major importance. In this paper, tyre-road interaction and radial tyre vibrations are investigated for tyre-road noise characterisation. Experimental measurements are performed on a rolling smooth tyre with test laboratory facilities. Both tread band and sidewall responses of the tyre are measured and compared to each other. High concentration of vibrations is observed in the vicinity of the contact area. Stationary radial deformation and non-stationary vibrations due to road rugosity are studied. Frequency analyses have been performed on the acceleration time signals showing the influence of the rotating speed on the vibrations level and frequency content. Finally, by integrating acceleration signal of the tyre tread over one revolution, stationary radial displacement can be calculated and the true contact length can be estimated. This study provides us with new measurement data for comparison with mathematical modelling. It also gives a physical insight on generation mechanism of tyre radial vibrations.

Road Lane Detection Robust to Shadows Based on a Fuzzy System Using a Visible Light Camera Sensor

Directory of Open Access Journals (Sweden)

Toan Minh Hoang

2017-10-01

Full Text Available Recently, autonomous vehicles, particularly self-driving cars, have received significant attention owing to rapid advancements in sensor and computation technologies. In addition to traffic sign recognition, road lane detection is one of the most important factors used in lane departure warning systems and autonomous vehicles for maintaining the safety of semi-autonomous and fully autonomous systems. Unlike traffic signs, road lanes are easily damaged by both internal and external factors such as road quality, occlusion (traffic on the road, weather conditions, and illumination (shadows from objects such as cars, trees, and buildings. Obtaining clear road lane markings for recognition processing is a difficult challenge. Therefore, we propose a method to overcome various illumination problems, particularly severe shadows, by using fuzzy system and line segment detector algorithms to obtain better results for detecting road lanes by a visible light camera sensor. Experimental results from three open databases, Caltech dataset, Santiago Lanes dataset (SLD, and Road Marking dataset, showed that our method outperformed conventional lane detection methods.

Identifying unstable sites on logging roads

Science.gov (United States)

R. M. Rice; J. Lewis

1986-01-01

Logging roads are an important source of forestry-related erosion. The amount of erosion on a forest road is determined by the interaction between how the road is constructed and maintained and the environment in which it is built. The roads in this study were constructed with large bulldozers, and most excavated material was sidecast. The roads studied were...

Resource Roads demonstration project : final report

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-15

British Columbia's vast network of resource roads are considered to be amongst the most dangerous, high-risk workplaces in the province. Resource roads, also known as industrial roads, forest service roads, or petroleum development roads, present several unique safety challenges as workplaces. They are built for the purpose of access, egress and transport of materials, resources, equipment and people. However, the lack the same diligence of enforcement and a consistent design, construction, maintenance and standard for use as public highways or municipal roads. There are also safety challenges related to public use of resource roads. This report presented a project, called ResourceRoads by WorkSafe BC that focused on the organization and implementation of a management structure that would provide a system of coordination and a process of compliance for the users of the defined road systems. The project was based on information gathered in two forest districts of Prince George and the South Peace Forest Districts. A committee consisting of the actual owner of the road and other users was formed. The report presented a history of British Columbia's resource road system, and discussed resource roads as industrial workplaces and worksites, as well as resource road fatality statistics. The demonstration project was outlined in terms of project leadership; scope; strategic objectives; project purpose; performance objectives; project communication; demonstration areas; and project stages. Project fundamentals and project findings were also presented along with recommendations and responses to the Auditor General report and the Forest Safety Ombudsman report. It was concluded that potential uses of new technologies for resource road vehicles should be reviewed. tabs., figs.

Tyres and road surfaces : paper presented to the Second Internation Skid Prevention Conference, Columbus, Ohio, May 2-6, 1977.

NARCIS (Netherlands)

Schlösser, L.H.M.

1999-01-01

The study concerning the contact between a tyre and a road surface was conducted by means of an experimental multifactor investigation. It was attempted not only to determine the effect of variables such as type of road surface and speed on the skid resistance but also interaction effects. In the

Automatic Detection and Classification of Audio Events for Road Surveillance Applications

Directory of Open Access Journals (Sweden)

Noor Almaadeed

2018-06-01

Full Text Available This work investigates the problem of detecting hazardous events on roads by designing an audio surveillance system that automatically detects perilous situations such as car crashes and tire skidding. In recent years, research has shown several visual surveillance systems that have been proposed for road monitoring to detect accidents with an aim to improve safety procedures in emergency cases. However, the visual information alone cannot detect certain events such as car crashes and tire skidding, especially under adverse and visually cluttered weather conditions such as snowfall, rain, and fog. Consequently, the incorporation of microphones and audio event detectors based on audio processing can significantly enhance the detection accuracy of such surveillance systems. This paper proposes to combine time-domain, frequency-domain, and joint time-frequency features extracted from a class of quadratic time-frequency distributions (QTFDs to detect events on roads through audio analysis and processing. Experiments were carried out using a publicly available dataset. The experimental results conform the effectiveness of the proposed approach for detecting hazardous events on roads as demonstrated by 7% improvement of accuracy rate when compared against methods that use individual temporal and spectral features.

TRUPACT-I over-the-road test

International Nuclear Information System (INIS)

Glass, R.E.; Gwinn, K.W.

1987-10-01

The TRUPACT-I was subjected to an over-the-road test to determine the package response to normal road environments. This test consisted of six road events: a rough primary road, a railroad grade crossing, an asphalt primary road, a concrete primary road, a bridge approach, and a rough secondary road. The package was instrumented with four vertical accelerometers to determine the package response to road vibration and shock. The results are given in the form of time histories, spectral densities, root mean square, and maximum accelerations for all accelerometers during each event. The results indicated that the railroad grade crossing produced the maximum average vertical accelerations. The maximum accelerations for all events were less than 1 g, and the root mean square loads remained below 0.25 g. 4 refs., 57 figs., 7 tabs

Road deaths in the Netherlands. [Previously known as: Road fatalities in The Netherlands.

NARCIS (Netherlands)

2011-01-01

This fact sheet outlines the development of the number of road deaths in the Netherlands since 1950. After a rise in the 1950s and 1960s, the number of road deaths in the Netherlands has shown a gradual decline since 1973. In 2016, there were 629 road deaths in the Netherlands. After the years of

What is vision Hampton Roads?

Science.gov (United States)

2010-01-01

What is Vision Hampton Roads? : Vision Hampton Roads is... : A regionwide economic development strategy based on the collective strengths of all : localities of Hampton Roads, created with the input of business, academia, nonprofits, : government,...

Practical method for estimating road curvatures using onboard GPS and IMU equipment

Science.gov (United States)

Zamfir, S.; Drosescu, R.; Gaiginschi, R.

2016-08-01

This paper describes an experimental method to determine with high accuracy the curvature of a road segment, the turning radius of a car, and the discomfort level perceived by the passengers in the vehicle cabin when passing through a curve. For these experiments we used professional equipment provided with two GPS active antennas with 13 dB gain featuring non-contact 100 Hz speed and distance measurement, and a ten degree Inertial Measurement Unit (IMU) with dynamic orientation outputs. The same experimental measurements also usedthe low cost GPS equipment available on smartphones, domestic vehicle GPS devices, as well as an Arduino GPS shield in order to compare the results generated by professional equipment. The purpose of these experiments was also to establish if certain road curve sections were correctly executed in order to ensure the safety and comfort of passengers. Another use of the proposed method relates to the road accident reconstruction field, providing experts and forensics with an accurate method of measuring the roadway curvature at accident scenes or traffic events. The research and equipment described in this paper have been acquired and developed under a PhD studyand a European funded project won and elaborated by the authors.

Road Infrastructure and Road User’s Satisfactions: A Case Study of Motorway Route 7, Thailand

Directory of Open Access Journals (Sweden)

Suanmali Suthathip

2014-01-01

Full Text Available The development of tourism in Thailand relies on the development of appropriate infrastructure. Road access is the key infrastructure issue for tourist destinations throughout Thailand. Each year Thailand has welcomed over 15 million travelers, accounted approximately 7% of GDP. To support tourist activities, variety types of transportation modes have designed. However, road transportation is one of the most effective modes that connect most places together. Beside high-standard vehicles, road is another mechanism that derive comfort and safety of travelling. For this reason, Motorway networks were initiated and constructed to support high speed traffic with high safety and standard. Motorway route 7 is one of major motorway networks that lies between major cities and tourist landmarks. To raise the road standard could be the key to support tourist industry and economic growth. The road developments may not be precise and accurate without knowing the needs from road users’. Therefore, a questionnaire is developed and distributed to 890 randomly selected road users along Motorway route 7. Factor analysis and t-test are employed to analyze the factors affecting road users’ satisfaction and to compare the satisfaction level between both inbound and outbound travelers.

Louisiana ESI: ROADS (Road Lines)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the state maintained primary and secondary road network of Louisiana. Vector lines in the data set represent Interstates, U.S. Highways, and...

The safe road transport system approach

Directory of Open Access Journals (Sweden)

Vollpracht Hans-Joachim

2016-07-01

Full Text Available More than 1,24 million people die each year on the worlds roads and between 20 to 50 million suffer from nonfatal injuries. The UN Road Safety Collaboration Meetings under the leadership of WHO developed the Programme for the Decade of Actions for road safety taking nations into the responsibility of improving their accident figures by the five pillars of a national Road Safety Policy, safer Roads, safer Vehicles, safer Road Users and Post Crash Care. It is this Safe System Approach that takes into consideration the land use, infrastructure and transport planning, road user’s abilities and limitations and the close cooperation of all governmental and none governmental stakeholders involved.

Impacts of road deicing salt on the demography of vernal pool-breeding amphibians.

Science.gov (United States)

Karraker, Nancy E; Gibbs, James P; Vonesh, James R

2008-04-01

Deicing agents, primarily road salt, are applied to roads in 26 states in the United States and in a number of European countries, yet the scale of impacts of road salt on aquatic organisms remains largely under-studied. The issue is germane to amphibian conservation because both adult and larval amphibians are known to be particularly sensitive to changes in their osmolar environments. In this study, we combined survey, experimental, and demographic modeling approaches to evaluate the possible effects of road salt on two common vernal-pond-breeding amphibian species, the spotted salamander (Ambystoma maculatum) and the wood frog (Rana sylvatica). We found that in the Adirondack Mountain Region of New York (USA), road salt traveled up to 172 m from the highway into wetlands. Surveys showed that egg mass densities of spotted salamanders (A. maculatum) and wood frogs (R. sylvatica) were two times higher in forest pools than roadside pools, but this pattern was better explained by road proximity than by increased salinity. Experiments demonstrated that embryonic and larval survival were reduced at moderate (500 muS) and high conductivities (3000 muS) in A. maculatum and at high conductivities in R. sylvatica. Demographic models suggest that such egg and larval stage effects of salt may have important impacts on populations near roads, particularly in the case of A. maculatum, for which salt exposure may lead to local extinction. For both species, the effect of road salt was dependent upon the strength of larval density dependence and declined rapidly with distance from the roadside, with the greatest negative effects being limited to within 50 m. Based on this evidence, we argue that efforts to protect local populations of A. maculatum and R. sylvatica in roadside wetlands should, in part, be aimed at reducing application of road salt near wetlands with high conductivity levels.

Reflection properties of road surfaces. Contribution to OECD Scientific Expert Group AC4 on Road Surface Characteristics.

NARCIS (Netherlands)

Schreuder, D.A.

1983-01-01

Photometric characteristics of road surfaces are dealt with. Representation of reflection properties in public lighting; quality criteria of road lighting installations; classification of road surfaces; the relation between reflection characteristics and other properties of road pavements in public

Road safety audits: The way forward

CSIR Research Space (South Africa)

Labuschagne, FJJ

2010-08-01

Full Text Available The South African Road Safety Manual (SARSM) was published in 1999 and includes guidelines on road safety audits (RSA). The development of SARSM was a proactive process for improving the road environment with respect to road safety but was never...

Parameterizing road construction in route-based road weather models: can ground-penetrating radar provide any answers?

International Nuclear Information System (INIS)

Hammond, D S; Chapman, L; Thornes, J E

2011-01-01

A ground-penetrating radar (GPR) survey of a 32 km mixed urban and rural study route is undertaken to assess the usefulness of GPR as a tool for parameterizing road construction in a route-based road weather forecast model. It is shown that GPR can easily identify even the smallest of bridges along the route, which previous thermal mapping surveys have identified as thermal singularities with implications for winter road maintenance. Using individual GPR traces measured at each forecast point along the route, an inflexion point detection algorithm attempts to identify the depth of the uppermost subsurface layers at each forecast point for use in a road weather model instead of existing ordinal road-type classifications. This approach has the potential to allow high resolution modelling of road construction and bridge decks on a scale previously not possible within a road weather model, but initial results reveal that significant future research will be required to unlock the full potential that this technology can bring to the road weather industry. (technical design note)

The importance of accurate road data for spatial applications in public health: customizing a road network

Directory of Open Access Journals (Sweden)

Laraia Barbara A

2009-05-01

Full Text Available Abstract Background Health researchers have increasingly adopted the use of geographic information systems (GIS for analyzing environments in which people live and how those environments affect health. One aspect of this research that is often overlooked is the quality and detail of the road data and whether or not it is appropriate for the scale of analysis. Many readily available road datasets, both public domain and commercial, contain positional errors or generalizations that may not be compatible with highly accurate geospatial locations. This study examined the accuracy, completeness, and currency of four readily available public and commercial sources for road data (North Carolina Department of Transportation, StreetMap Pro, TIGER/Line 2000, TIGER/Line 2007 relative to a custom road dataset which we developed and used for comparison. Methods and Results A custom road network dataset was developed to examine associations between health behaviors and the environment among pregnant and postpartum women living in central North Carolina in the United States. Three analytical measures were developed to assess the comparative accuracy and utility of four publicly and commercially available road datasets and the custom dataset in relation to participants' residential locations over three time periods. The exclusion of road segments and positional errors in the four comparison road datasets resulted in between 5.9% and 64.4% of respondents lying farther than 15.24 meters from their nearest road, the distance of the threshold set by the project to facilitate spatial analysis. Agreement, using a Pearson's correlation coefficient, between the customized road dataset and the four comparison road datasets ranged from 0.01 to 0.82. Conclusion This study demonstrates the importance of examining available road datasets and assessing their completeness, accuracy, and currency for their particular study area. This paper serves as an example for assessing

Assessment of Road Infrastructures Pertaining to Malaysian Experience

Directory of Open Access Journals (Sweden)

Samsuddin Norshakina

2016-01-01

Full Text Available Road Infrastructures contribute towards many severe accidents and it needs supervision as to improve road safety levels. The numbers of fatalities have increased annually and road authority should seriously consider conducting programs or activities to periodically monitor, restore of improve road infrastructure. Implementation of road safety audits may reduce fatalities among road users and maintain road safety at acceptable standards. This paper is aimed to discuss the aspects of road infrastructure in Malaysia. The research signifies the impact of road hazards during the observations and the impact of road infrastructure types on road accidents. The F050 (Jalan Kluang-Batu Pahat road case study showed that infrastructure risk is closely related with number of accident. As the infrastructure risk increase, the number of road accidents also increase. It was also found that different road zones along Jalan Kluang-Batu Pahat showed different level of intersection volume due to number of road intersection. Thus, it is hoped that by implementing continuous assessment on road infrastructures, it might be able to reduce road accidents and fatalities among drives and the community.

Tools for road infrastructure safety management in poland

Directory of Open Access Journals (Sweden)

Kustra Wojciech

2017-01-01

Full Text Available Road safety can be improved by implementing principles of road safety infrastructure management (RIS on the network of European roads as adopted in the Directive. The document recommends that member states should use tried and tested tools for road safety management such as: road safety impact assessment (RIA, road safety audit (RSA, safety management on existing road networks including road safety ranking (RSM and road safety inspection (RSI. The objective of the methods is to help road authorities to take rational decisions in the area of road safety and road infrastructure safety and understand the consequences occurring in the particular phases of road life cycle. To help with assessing the impact of a road project on the safety of related roads, a method was developed for long-term forecasts of accidents and accident cost estimation as well as a risk classification to identify risks that are not acceptable risks. With regard to road safety audits and road safety inspection, a set of principles was developed to identify risks and the basic classification of mistakes and omissions.

Multilayered complex network datasets for three supply chain network archetypes on an urban road grid

Directory of Open Access Journals (Sweden)

Nadia M. Viljoen

2018-02-01

Full Text Available This article presents the multilayered complex network formulation for three different supply chain network archetypes on an urban road grid and describes how 500 instances were randomly generated for each archetype. Both the supply chain network layer and the urban road network layer are directed unweighted networks. The shortest path set is calculated for each of the 1 500 experimental instances. The datasets are used to empirically explore the impact that the supply chain's dependence on the transport network has on its vulnerability in Viljoen and Joubert (2017 [1]. The datasets are publicly available on Mendeley (Joubert and Viljoen, 2017 [2]. Keywords: Multilayered complex networks, Supply chain vulnerability, Urban road networks

Ranking EU progress on road safety : 11th road safety Performance Index (PIN) report.

NARCIS (Netherlands)

Adminaite, D. Jost, G. Stipdonk, H. & Ward, H.

2017-01-01

In 2010, the European Union renewed its commitment to improve road safety by setting a target of reducing road deaths by 50% by 2020, compared to 2010 levels. This target followed an earlier target set in 2001 to halve road deaths by 2010. Since 2014, progress has virtually ground to a halt. 2016

A combined road weather forecast system to prevent road ice formation in the Adige Valley (Italy)

Science.gov (United States)

Di Napoli, Claudia; Piazza, Andrea; Antonacci, Gianluca; Todeschini, Ilaria; Apolloni, Roberto; Pretto, Ilaria

2016-04-01

Road ice is a dangerous meteorological hazard to a nation's transportation system and economy. By reducing the pavement friction with vehicle tyres, ice formation on pavements increases accident risk and delays travelling times thus posing a serious threat to road users' safety and the running of economic activities. Keeping roads clear and open is therefore essential, especially in mountainous areas where ice is likely to form during the winter period. Winter road maintenance helps to restore road efficiency and security, and its benefits are up to 8 times the costs sustained for anti-icing strategies [1]. However, the optimization of maintenance costs and the reduction of the environmental damage from over-salting demand further improvements. These can be achieved by reliable road weather forecasts, and in particular by the prediction of road surface temperatures (RSTs). RST is one of the most important parameters in determining road surface conditions. It is well known from literature that ice forms on pavements in high-humidity conditions when RSTs are below 0°C. We have therefore implemented an automatic forecast system to predict critical RSTs on a test route along the Adige Valley complex terrain, in the Italian Alps. The system considers two physical models, each computing heat and energy fluxes between the road and the atmosphere. One is Reuter's radiative cooling model, which predicts RSTs at sunrise as a function of surface temperatures at sunset and the time passed since then [2]. One is METRo (Model of the Environment and Temperature of Roads), a road weather forecast software which also considers heat conduction through road material [3]. We have applied the forecast system to a network of road weather stations (road weather information system, RWIS) installed on the test route [4]. Road and atmospheric observations from RWIS have been used as initial conditions for both METRo and Reuter's model. In METRo observations have also been coupled to

30 CFR 816.151 - Primary roads.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Primary roads. 816.151 Section 816.151 Mineral... roads. Primary roads shall meet the requirements of section 816.150 and the additional requirements of this section. (a) Certification. The construction or reconstruction of primary roads shall be certified...

Comparison of the predictions of two road dust emission models with the measurements of a mobile van

Science.gov (United States)

Kauhaniemi, M.; Stojiljkovic, A.; Pirjola, L.; Karppinen, A.; Härkönen, J.; Kupiainen, K.; Kangas, L.; Aarnio, M. A.; Omstedt, G.; Denby, B. R.; Kukkonen, J.

2014-09-01

The predictions of two road dust suspension emission models were compared with the on-site mobile measurements of suspension emission factors. Such a quantitative comparison has not previously been reported in the reviewed literature. The models used were the Nordic collaboration model NORTRIP (NOn-exhaust Road TRaffic Induced Particle emissions) and the Swedish-Finnish FORE model (Forecasting Of Road dust Emissions). These models describe particulate matter generated by the wear of road surface due to traction control methods and processes that control the suspension of road dust particles into the air. An experimental measurement campaign was conducted using a mobile laboratory called SNIFFER, along two selected road segments in central Helsinki in 2007 and 2008. The suspended PM10 concentration was measured behind the left rear tyre and the street background PM10 concentration in front of the van. Both models reproduced the measured seasonal variation of suspension emission factors fairly well during both years at both measurement sites. However, both models substantially under-predicted the measured emission values. The article illustrates the challenges in conducting road suspension measurements in densely trafficked urban conditions, and the numerous requirements for input data that are needed for accurately applying road suspension emission models.

Road Anomalies Detection System Evaluation.

Science.gov (United States)

Silva, Nuno; Shah, Vaibhav; Soares, João; Rodrigues, Helena

2018-06-21

Anomalies on road pavement cause discomfort to drivers and passengers, and may cause mechanical failure or even accidents. Governments spend millions of Euros every year on road maintenance, often causing traffic jams and congestion on urban roads on a daily basis. This paper analyses the difference between the deployment of a road anomalies detection and identification system in a “conditioned” and a real world setup, where the system performed worse compared to the “conditioned” setup. It also presents a system performance analysis based on the analysis of the training data sets; on the analysis of the attributes complexity, through the application of PCA techniques; and on the analysis of the attributes in the context of each anomaly type, using acceleration standard deviation attributes to observe how different anomalies classes are distributed in the Cartesian coordinates system. Overall, in this paper, we describe the main insights on road anomalies detection challenges to support the design and deployment of a new iteration of our system towards the deployment of a road anomaly detection service to provide information about roads condition to drivers and government entities.

Road design, human behaviour, and road accidents : towards a `learning design community'. Paper presented at the international conference `Road safety in Europe', Birmingham, England, September 9-11, 1996.

NARCIS (Netherlands)

Wegman, F.C.M.

1996-01-01

This paper discusses a number of unsolved problems in the field of road design (i.e. geometric design), human behaviour and road safety, particularly concerning the operationalisation of the existing design principles for a safe road network in terms of concrete road design in existing

The Development of child road safety competence : the new approach tо road safety education

OpenAIRE

Vilkonis, Rytis

2005-01-01

The education and information are the strategies of the Road safety. However, some of the documents and scientific findings revealed the chaotic, desultory and theoretically groundless Road safety education and it can be stated that Road safety education system in Lithuania is still being established. The shortage of the theoretical and empirical base of Road safety education is slowing down the process of the system development. Aim of the research is to disclose the assumptions for developm...

Road crash costs.

NARCIS (Netherlands)

2010-01-01

Road crashes result in all kinds of social costs, such as medical costs, production loss, human losses, property damage, settlement costs and costs due to congestion. Studies into road crash costs and their trends are carried out quite regularly. In 2009, the costs amounted to € 12.5 billion, or

Tyre and road wear prediction

NARCIS (Netherlands)

Lupker, H.A.

2003-01-01

Both tyre wear and road polishing are complex phenomenon, which are obviously strongly related; the energy that polishes the road is the energy that wears the tyre. The both depend non-linearly on numerous parameters, like materials used, vehicle and road usage, environmental conditions (i.e.

30 CFR 817.151 - Primary roads.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Primary roads. 817.151 Section 817.151 Mineral... roads. Primary roads shall meet the requirements of § 817.150 and the additional requirements of this section. (a) Certification. The construction or reconstruction of primary roads shall be certified in a...

In–Service Road Safety Audits

Directory of Open Access Journals (Sweden)

A. Mendoza–Díaz

2009-04-01

Full Text Available A road safety audit is a formal analysis that seeks to guarantee that an existing or future road fulfills optimal safety criteria, conducted by a team of experts who se members are independent of the road project. It can be carried out in one, several or all of the stages of the project (planning, design, construction, before opening the road to traffic, and operation. The development and implementation of a road safety audit process is one of the strategies that have been applied in Mexico in recent years to reduce road accidents and their associated consequences. The objective of this work is to present the procedures that have been developed and applied in Mexico, as well as the benefits and problems that have been encountered. The application of those procedures to a specific case is also shown. Emphasis is made in the audit of high ways in the operation stage, which is the type that greater application and development has had in Mexico.

Road weather information for travelers : improving road weather messages and dissemination methods.

Science.gov (United States)

2010-01-01

The Federal Highway Administration (FHWA) Road Weather Management Program (RWMP) recently completed a study titled Human Factors Analysis of Road Weather Advisory and Control Information (Publication No. FHWAJPO- 10-053). The goal of the study was to...

How long do the dead survive on the road? Carcass persistence probability and implications for road-kill monitoring surveys.

Directory of Open Access Journals (Sweden)

Sara M Santos

Full Text Available BACKGROUND: Road mortality is probably the best-known and visible impact of roads upon wildlife. Although several factors influence road-kill counts, carcass persistence time is considered the most important determinant underlying underestimates of road mortality. The present study aims to describe and model carcass persistence variability on the road for different taxonomic groups under different environmental conditions throughout the year; and also to assess the effect of sampling frequency on the relative variation in road-kill estimates registered within a survey. METHODOLOGY/PRINCIPAL FINDINGS: Daily surveys of road-killed vertebrates were conducted over one year along four road sections with different traffic volumes. Survival analysis was then used to i describe carcass persistence timings for overall and for specific animal groups; ii assess optimal sampling designs according to research objectives; and iii model the influence of road, animal and weather factors on carcass persistence probabilities. Most animal carcasses persisted on the road for the first day only, with some groups disappearing at very high rates. The advisable periodicity of road monitoring that minimizes bias in road mortality estimates is daily monitoring for bats (in the morning and lizards (in the afternoon, daily monitoring for toads, small birds, small mammals, snakes, salamanders, and lagomorphs; 1 day-interval (alternate days for large birds, birds of prey, hedgehogs, and freshwater turtles; and 2 day-interval for carnivores. Multiple factors influenced the persistence probabilities of vertebrate carcasses on the road. Overall, the persistence was much lower for small animals, on roads with lower traffic volumes, for carcasses located on road lanes, and during humid conditions and high temperatures during the wet season and dry seasons, respectively. CONCLUSION/SIGNIFICANCE: The guidance given here on monitoring frequencies is particularly relevant to provide

How long do the dead survive on the road? Carcass persistence probability and implications for road-kill monitoring surveys.

Science.gov (United States)

Santos, Sara M; Carvalho, Filipe; Mira, António

2011-01-01

Road mortality is probably the best-known and visible impact of roads upon wildlife. Although several factors influence road-kill counts, carcass persistence time is considered the most important determinant underlying underestimates of road mortality. The present study aims to describe and model carcass persistence variability on the road for different taxonomic groups under different environmental conditions throughout the year; and also to assess the effect of sampling frequency on the relative variation in road-kill estimates registered within a survey. Daily surveys of road-killed vertebrates were conducted over one year along four road sections with different traffic volumes. Survival analysis was then used to i) describe carcass persistence timings for overall and for specific animal groups; ii) assess optimal sampling designs according to research objectives; and iii) model the influence of road, animal and weather factors on carcass persistence probabilities. Most animal carcasses persisted on the road for the first day only, with some groups disappearing at very high rates. The advisable periodicity of road monitoring that minimizes bias in road mortality estimates is daily monitoring for bats (in the morning) and lizards (in the afternoon), daily monitoring for toads, small birds, small mammals, snakes, salamanders, and lagomorphs; 1 day-interval (alternate days) for large birds, birds of prey, hedgehogs, and freshwater turtles; and 2 day-interval for carnivores. Multiple factors influenced the persistence probabilities of vertebrate carcasses on the road. Overall, the persistence was much lower for small animals, on roads with lower traffic volumes, for carcasses located on road lanes, and during humid conditions and high temperatures during the wet season and dry seasons, respectively. The guidance given here on monitoring frequencies is particularly relevant to provide conservation and transportation agencies with accurate numbers of road

Solutions to Improve Road Circulation in the Pitesti City Based on Analysis-Diagnostics of Road Traffic

Science.gov (United States)

Vîlcan, A.; Neagu, E.; Badarau Suster, H.; Boroiu, A. A.

2017-10-01

Road traffic congestion has become a daily phenomenon in the central area of Pitesti in the peak traffic periods. In order to achieve the mobility plan of Pitesti, an important stage is the diagnostic analysis of the road traffic. For this purpose, the urban road network was formalized through a graph containing the most important 40 intersections and traffic measurements were made at all these intersections and on the main roads connecting the peri-urban area. The data obtained by traffic macrosimulation confirmed the overloading of the street network during peak traffic hours and the analyzes made for various road traffic organization scenarios have shown that there are sustainable solutions for urban mobility only if the road network is fundamentally reconfigured (a belt outside the city and a median ring). Thus, the necessity of realizing the road passage in the Prundu neighbourhood and the finishing of the city belt by realizing the “detour West” of the city is argued. The importance of the work is that it brings scientific arguments for the realization of these road infrastructure projects, integrated in the urban mobility plan, which will base the development strategy of the Pitesti municipality.

25 CFR 265.3 - Roads prohibited.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Roads prohibited. 265.3 Section 265.3 Indians BUREAU OF... ON INDIAN RESERVATIONS § 265.3 Roads prohibited. (a) Within the boundaries of this officially... highways, roads, truck trails, work roads, and all other types of ways constructed to make possible the...

Opportunities of forest roads usage as emergency access road for natural disaster

Directory of Open Access Journals (Sweden)

Can Vatandaşlar

2016-07-01

Full Text Available This study was carried out to examine the applicability of forest roads as emergency access and evacuation corridor for an alternative to motorways following a prospective earthquake in İstanbul. For this purpose, various disaster scenarios were created in the district of Beykoz and the shortest routes between critical points were determined through network analysis in Geographic Information System (GIS. Results indicated that access was possible between Beykoz city center and shelter, hospital, fire station, disaster management center, and military area via forest roads even if motorways became unusable. However, distance generally got longer and time of arrival increased on the routes of forest road. The increase in time of arrival was attributed to decrease in average cruising speed in addition to the increase in distance. This limitation can be overcome by enhancing the geometric standards of forest roads and completing superstructure operations. Results are important for revealing that forest roads can be used in other fields besides forestry activities, they can strengthen decision support system of managers, and enable first aid crew to reach the scene in the minimal time.

Noise Costs from Road Transport

Science.gov (United States)

Margorínová, Martina; Trojanová, Mária; Decký, Martin; Remišová, Eva

2018-06-01

Building and improving road infrastructure in Slovakia is currently influenced by the amount of state funding. Therefore, it is necessary to determine the effectiveness of each proposed solution of road project, which is based on life-cycle costs. Besides capital costs, social costs are also important, which valued the negative impacts due to road construction and operation on road users, the environment, and the population living in the affected area. Some components of social costs have shortcomings in quantifying and valuating, which need to be resolved. The one of important components which affects human health and the value of an area, and have some shortcomings are noise costs. Improvement of this component will lead to more accurate valuation of economic efficiency of roads.

Drivers’ Visual Behavior-Guided RRT Motion Planner for Autonomous On-Road Driving

Directory of Open Access Journals (Sweden)

Mingbo Du

2016-01-01

Full Text Available This paper describes a real-time motion planner based on the drivers’ visual behavior-guided rapidly exploring random tree (RRT approach, which is applicable to on-road driving of autonomous vehicles. The primary novelty is in the use of the guidance of drivers’ visual search behavior in the framework of RRT motion planner. RRT is an incremental sampling-based method that is widely used to solve the robotic motion planning problems. However, RRT is often unreliable in a number of practical applications such as autonomous vehicles used for on-road driving because of the unnatural trajectory, useless sampling, and slow exploration. To address these problems, we present an interesting RRT algorithm that introduces an effective guided sampling strategy based on the drivers’ visual search behavior on road and a continuous-curvature smooth method based on B-spline. The proposed algorithm is implemented on a real autonomous vehicle and verified against several different traffic scenarios. A large number of the experimental results demonstrate that our algorithm is feasible and efficient for on-road autonomous driving. Furthermore, the comparative test and statistical analyses illustrate that its excellent performance is superior to other previous algorithms.

Drivers' Visual Behavior-Guided RRT Motion Planner for Autonomous On-Road Driving.

Science.gov (United States)

Du, Mingbo; Mei, Tao; Liang, Huawei; Chen, Jiajia; Huang, Rulin; Zhao, Pan

2016-01-15

This paper describes a real-time motion planner based on the drivers' visual behavior-guided rapidly exploring random tree (RRT) approach, which is applicable to on-road driving of autonomous vehicles. The primary novelty is in the use of the guidance of drivers' visual search behavior in the framework of RRT motion planner. RRT is an incremental sampling-based method that is widely used to solve the robotic motion planning problems. However, RRT is often unreliable in a number of practical applications such as autonomous vehicles used for on-road driving because of the unnatural trajectory, useless sampling, and slow exploration. To address these problems, we present an interesting RRT algorithm that introduces an effective guided sampling strategy based on the drivers' visual search behavior on road and a continuous-curvature smooth method based on B-spline. The proposed algorithm is implemented on a real autonomous vehicle and verified against several different traffic scenarios. A large number of the experimental results demonstrate that our algorithm is feasible and efficient for on-road autonomous driving. Furthermore, the comparative test and statistical analyses illustrate that its excellent performance is superior to other previous algorithms.

Drivers’ Visual Behavior-Guided RRT Motion Planner for Autonomous On-Road Driving

Science.gov (United States)

Du, Mingbo; Mei, Tao; Liang, Huawei; Chen, Jiajia; Huang, Rulin; Zhao, Pan

2016-01-01

This paper describes a real-time motion planner based on the drivers’ visual behavior-guided rapidly exploring random tree (RRT) approach, which is applicable to on-road driving of autonomous vehicles. The primary novelty is in the use of the guidance of drivers’ visual search behavior in the framework of RRT motion planner. RRT is an incremental sampling-based method that is widely used to solve the robotic motion planning problems. However, RRT is often unreliable in a number of practical applications such as autonomous vehicles used for on-road driving because of the unnatural trajectory, useless sampling, and slow exploration. To address these problems, we present an interesting RRT algorithm that introduces an effective guided sampling strategy based on the drivers’ visual search behavior on road and a continuous-curvature smooth method based on B-spline. The proposed algorithm is implemented on a real autonomous vehicle and verified against several different traffic scenarios. A large number of the experimental results demonstrate that our algorithm is feasible and efficient for on-road autonomous driving. Furthermore, the comparative test and statistical analyses illustrate that its excellent performance is superior to other previous algorithms. PMID:26784203

24 CFR 1710.210 - Roads.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Roads. 1710.210 Section 1710.210... (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements § 1710.210 Roads. (a) State the estimated cost to the developer of the proposed road system. (b) If the developer is to...

14 CFR 151.89 - Roads.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Roads. 151.89 Section 151.89 Aeronautics... AID TO AIRPORTS Project Programming Standards § 151.89 Roads. (a) Federal-aid Airport Program funds may not be used to resolve highway problems. Only those airport entrance roads that are definitely...

24 CFR 1710.110 - Roads.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Roads. 1710.110 Section 1710.110... (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements § 1710.110 Roads. (a) Access to the subdivision. (1) Is access to the subdivision provided by public or private roads? What...

Kilburn High Road Revisited

Directory of Open Access Journals (Sweden)

Cristina Capineri

2016-07-01

Full Text Available Drawing on John Agnew’s (1987 theoretical framework for the analysis of place (location, locale and sense of place and on Doreen Massey’s (1991 interpretation of Kilburn High Road (London, the contribution develops an analysis of the notion of place in the case study of Kilburn High Road by comparing the semantics emerging from Doreen Massey’s interpretation of Kilburn High Road in the late Nineties with those from a selection of noisy and unstructured volunteered geographic information collected from Flickr photos and Tweets harvested in 2014–2015. The comparison shows how sense of place is dynamic and changing over time and explores Kilburn High Road through the categories of location, locale and sense of place derived from the qualitative analysis of VGI content and annotations. The contribution shows how VGI can contribute to discovering the unique relationship between people and place which takes the form given by Doreen Massey to Kilburn High Road and then moves on to the many forms given by people experiencing Kilburn High Road through a photo, a Tweet or a simple narrative. Finally, the paper suggests that the analysis of VGI content can contribute to detect the relevant features of street life, from infrastructure to citizens’ perceptions, which should be taken into account for a more human-centered approach in planning or service management.

PROPOSAL OF VOIVODESHIP ROAD SAFETY IMPROVEMENT PROGRAMME

Directory of Open Access Journals (Sweden)

Tomasz SZCZURASZEK

2016-07-01

Full Text Available The article presents a proposal of the ‘GAMBIT KUJAWSKO-POMORSKI’ Road Safety Improvement Programme. The main idea of the Programme is to establish and initiate systems that will be responsible for the most important areas of activity within road safety, including road safety control, supervision, and management systems in the whole Voivodeship. In total, the creation and start of nine such systems has been proposed, namely: the Road Safety Management, the Integrated Road Rescue Service, the Personnel Continuing Education, the Hazardous Road Behaviour Monitoring, the Social Education for Safe Behaviour on Road, the Teaching Personnel Improvement, the Area Development and Planning Process Improvement, the Road Infrastructure Design Quality Improvement, and the Road and Traffic Management Process Efficiency Improvement. The basic aim of each system has been discussed as well as the most important tasks implemented as its part. The Road Safety Improvement Programme for the Kujawsko-Pomorskie Voivodeship presented in this article is a part of the National Road Safety Programme 2013-2020. Moreover, it is not only an original programme in Poland, but also a universal project that may be adapted for other voivodeships as well.

Do roads reduce painted turtle (Chrysemys picta populations?

Directory of Open Access Journals (Sweden)

Alexandra Dorland

Full Text Available Road mortality is thought to be a leading cause of turtle population decline. However, empirical evidence of the direct negative effects of road mortality on turtle population abundance is lacking. The purpose of this study was to provide a strong test of the prediction that roads reduce turtle population abundance. While controlling for potentially confounding variables, we compared relative abundance of painted turtles (Chrysemys picta in 20 ponds in Eastern Ontario, 10 as close as possible to high traffic roads (Road sites and 10 as far as possible from any major roads (No Road sites. There was no significant effect of roads on painted turtle relative abundance. Furthermore, our data do not support other predictions of the road mortality hypothesis; we observed neither a higher relative frequency of males to females at Road sites than at No Road sites, nor a lower average body size of turtles at Road than at No Road sites. We speculate that, although roads can cause substantial adult mortality in turtles, other factors, such as release from predation on adults and/or nests close to roads counter the negative effect of road mortality in some populations. We suggest that road mitigation for painted turtles can be limited to locations where turtles are forced to migrate across high traffic roads due, for example, to destruction of local nesting habitat or seasonal drying of ponds. This conclusion should not be extrapolated to other species of turtles, where road mortality could have a larger population-level effect than on painted turtles.

Do roads reduce painted turtle (Chrysemys picta) populations?

Science.gov (United States)

Dorland, Alexandra; Rytwinski, Trina; Fahrig, Lenore

2014-01-01

Road mortality is thought to be a leading cause of turtle population decline. However, empirical evidence of the direct negative effects of road mortality on turtle population abundance is lacking. The purpose of this study was to provide a strong test of the prediction that roads reduce turtle population abundance. While controlling for potentially confounding variables, we compared relative abundance of painted turtles (Chrysemys picta) in 20 ponds in Eastern Ontario, 10 as close as possible to high traffic roads (Road sites) and 10 as far as possible from any major roads (No Road sites). There was no significant effect of roads on painted turtle relative abundance. Furthermore, our data do not support other predictions of the road mortality hypothesis; we observed neither a higher relative frequency of males to females at Road sites than at No Road sites, nor a lower average body size of turtles at Road than at No Road sites. We speculate that, although roads can cause substantial adult mortality in turtles, other factors, such as release from predation on adults and/or nests close to roads counter the negative effect of road mortality in some populations. We suggest that road mitigation for painted turtles can be limited to locations where turtles are forced to migrate across high traffic roads due, for example, to destruction of local nesting habitat or seasonal drying of ponds. This conclusion should not be extrapolated to other species of turtles, where road mortality could have a larger population-level effect than on painted turtles.

EDITORIAL ROAD SAFETY IN KENYA

African Journals Online (AJOL)

data for the purpose of legal prosecution and insurance claims. The accident data P41 form filled at the Police Stations are collated and forwarded to the Roads Department, Ministry of Roads and Public. Works for further processing and analysis (1, 12). The. Roads Department analyses the information in order to determine:.

Future Roads Near Streams

Data.gov (United States)

U.S. Environmental Protection Agency — Roads are a source of auto related pollutants (e.g. gasoline, oil and other engine fluids). When roads are near streams, rain can wash these pollutants directly into...

Road Maintenance in Africa: Approaches and Perspectives

Directory of Open Access Journals (Sweden)

M Mostafa Hassan

2018-01-01

Full Text Available In Africa, roads are the dominant mode of passenger and freight transport, for which the need is growing rapidly. It is noticeable that most of the African countries do not do enough to ensure the sustainability of road infrastructure as it has been widely reported that roads are affected, to varying degrees, by premature deterioration. Most of the African countries have adopted institutional reforms, notably entailing the creation of road funds and road agencies, and made significant progress on road maintenance. However, many challenges remain to be addressed in all of them to ensure appropriate maintenance. Although spending on road maintenance has increased over time in all African countries it remains insufficient to cover the needs. Poorly maintained roads constrain mobility, significantly raise vehicle operating costs, increase accident rates and their associated human and property costs, and aggravate isolation, poverty, poor health, and illiteracy in rural communities. This paper focuses, in particular, on road maintenance in some African countries considering types of road maintenance and the different approaches aiming at a comparison to reflect on similarities and differences.

Road Maintenance in Africa: Approaches and Perspectives

Science.gov (United States)

M, Mostafa Hassan

2018-06-01

In Africa, roads are the dominant mode of passenger and freight transport, for which the need is growing rapidly. It is noticeable that most of the African countries do not do enough to ensure the sustainability of road infrastructure as it has been widely reported that roads are affected, to varying degrees, by premature deterioration. Most of the African countries have adopted institutional reforms, notably entailing the creation of road funds and road agencies, and made significant progress on road maintenance. However, many challenges remain to be addressed in all of them to ensure appropriate maintenance. Although spending on road maintenance has increased over time in all African countries it remains insufficient to cover the needs. Poorly maintained roads constrain mobility, significantly raise vehicle operating costs, increase accident rates and their associated human and property costs, and aggravate isolation, poverty, poor health, and illiteracy in rural communities. This paper focuses, in particular, on road maintenance in some African countries considering types of road maintenance and the different approaches aiming at a comparison to reflect on similarities and differences.

Rapid road repair vehicle

Science.gov (United States)

Mara, Leo M.

1998-01-01

Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find an the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was was heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past.

Competitiveness in Road Transport

DEFF Research Database (Denmark)

Borgström, Benedikte; Gammelgaard, Britta; Bruun, Poul

Road transport is an important sector, connecting time and space of production and consumption. Its market conditions has changed. The EU single market implementation has increased price pressure due to supply of low cost road freight transport from counties with lower cost structures. Changes...... in the market also encourage strategic development of some road hauliers into providers of unique services. Such road haulier strategic development contributes to efficiency and effectiveness in basically all business sectors of EU. Little research is available of such strategic and operational management....... In this paper we will explore that knowledge gap and analyze what value proposition(s) and capabilities can transform potential cost disadvantages of acting in a market that includes both high- and low-cost-country actors? And in conceptual terminology, how are capabilities deployed and developed to construct...

Tyres and road surfaces : experimental multifactor investigation of the factors affecting the brake and side way forces between car tyres and wet road surfaces : summary, conclusions and recommendations from the study by Sub-Committee I of the Working Group on "Tyres, Road Surfaces and Skidding Accidents".

NARCIS (Netherlands)

1976-01-01

The study concerning the contact between a tyre and the road surface was conducted in three phases. In the first phase the first and second-order factors were separated. The factors: type of road surface, tyre type, tread depth, water depth, tyre pressure and tyre load were included in an

An Evaluation of Forest Road Standards and Road Gradients in Turkey in View of FAO Criteria and Some EU Practices

Directory of Open Access Journals (Sweden)

Sadık Çağlar

2009-04-01

Full Text Available Forest roads are one of the inevitable infrastructures in conducting forestry operations. Around 1000 km under standardized forest roads have been largely repaired in addition to construction of 1000 km new forest roads in Turkey. Implementing uniform road gradient along the road sections is very important in terms of transportation techniques and safety, as well as the geometrical standardizations of the forest road. In this study, current road standards, longitudinal gradient values and their limitations in forest road constructions recommended by Food and Agriculture Organization of the United Nations (FAO and some Europe Union (EU countries were examined. Firstly, the forest road standards and their gradient values have been defined in Turkish forest road construction practices. Afterwards, the forest road standards and the gradient values applied by FAO and some EU countries were presented, and finally, the specifications were examined by comparing them with the current practices in Turkish forestry.

Road safety and road traffic accidents in Saudi Arabia

OpenAIRE

Mansuri, Farah A.; Al-Zalabani, Abdulmohsen H.; Zalat, Marwa M.; Qabshawi, Reem I.

2015-01-01

Objectives: To identify the changing trends and crucial preventive approaches to road traffic accidents (RTAs) adopted in the Kingdom of Saudi Arabia (KSA) over the last 2.5 decades, and to analyze aspects previously overlooked. Methods: This systematic review was based on evidence of RTAs in KSA. All articles published during the last 25 years on road traffic accident in KSA were analyzed. This study was carried out from December 2013 to May 2014 in the Department of Family and Community Med...

Drawing Road Networks with Mental Maps.

Science.gov (United States)

Lin, Shih-Syun; Lin, Chao-Hung; Hu, Yan-Jhang; Lee, Tong-Yee

2014-09-01

Tourist and destination maps are thematic maps designed to represent specific themes in maps. The road network topologies in these maps are generally more important than the geometric accuracy of roads. A road network warping method is proposed to facilitate map generation and improve theme representation in maps. The basic idea is deforming a road network to meet a user-specified mental map while an optimization process is performed to propagate distortions originating from road network warping. To generate a map, the proposed method includes algorithms for estimating road significance and for deforming a road network according to various geometric and aesthetic constraints. The proposed method can produce an iconic mark of a theme from a road network and meet a user-specified mental map. Therefore, the resulting map can serve as a tourist or destination map that not only provides visual aids for route planning and navigation tasks, but also visually emphasizes the presentation of a theme in a map for the purpose of advertising. In the experiments, the demonstrations of map generations show that our method enables map generation systems to generate deformed tourist and destination maps efficiently.

Improved Road-Network-Flow Control Strategy Based on Macroscopic Fundamental Diagrams and Queuing Length in Connected-Vehicle Network

Directory of Open Access Journals (Sweden)

Xiaohui Lin

2017-01-01

Full Text Available Connected-vehicles network provides opportunities and conditions for improving traffic signal control, and macroscopic fundamental diagrams (MFD can control the road network at the macrolevel effectively. This paper integrated proposed real-time access to the number of mobile vehicles and the maximum road queuing length in the Connected-vehicles network. Moreover, when implementing a simple control strategy to limit the boundary flow of a road network based on MFD, we determined whether the maximum queuing length of each boundary section exceeds the road-safety queuing length in real-time calculations and timely adjusted the road-network influx rate to avoid the overflow phenomenon in the boundary section. We established a road-network microtraffic simulation model in VISSIM software taking a district as the experimental area, determined MFD of the region based on the number of mobile vehicles, and weighted traffic volume of the road network. When the road network was tending to saturate, we implemented a simple control strategy and our algorithm limits the boundary flow. Finally, we compared the traffic signal control indicators with three strategies: (1 no control strategy, (2 boundary control, and (3 boundary control with limiting queue strategy. The results show that our proposed algorithm is better than the other two.

Road accident fatality risks for "vulnerable" versus "protected" road users in northern Ghana.

Science.gov (United States)

Damsere-Derry, James; Palk, Gavan; King, Mark

2017-10-03

Road traffic injuries (RTIs) are a serious epidemic that claims more than a million lives across the globe each year. The burden of RTIs is particularly pronounced in Africa and other low- and middle-income countries. The unfavorable disparity of the burden of road trauma in the world is largely attributable to unsafe vehicles, lack of appropriate road infrastructure, and the predominance of vulnerable road users (VRUs) in developing countries. However, little research exists in northern Ghana to highlight the scale and risk of death among road users. The objective of this research was to establish the relative risk of death among road users in northern Ghana. Crash data from police reports between 2007 and 2011 were analyzed for the Upper Regions of Ghana. Conditional probabilities and multivariable logistic regression techniques were used to report proportions and adjusted odds ratios (AORs), respectively. Generally, crashes in northern Ghana were extremely severe; that is, 35% of all injury related collisions were fatal. The proportion of fatal casualties ranged between 21% among victims of sideswipe collisions and 41% among pedestrians and victims of rear-end collisions. Though males were 6 times more likely to die than females overall, females were more likely to die as pedestrians (90% of all female casualty deaths) and males were more likely to die as riders/drivers (78% of all male casualty deaths). Pedestrians were 3 times more likely to die (odds ratio [OR] = 3.1; 95% confidence interval [CI], 2.4 to 4.1) compared with drivers/riders. Compared with drivers, the odds of death among cyclists was about 4 times higher (AOR = 3.6; 95% CI, 2.3 to 5.6) and about 2 times higher among motorcyclists (AOR = 1.6; 95% CI, 1.2 to 2.2). Compared with casualties aged between 30 and 59 years, children under 10 years and those aged 60 years and above were independently 2 times more likely to die in traffic collisions. Provision of requisite road infrastructure is vital

Overview of the neural network based technique for monitoring of road condition via reconstructed road profiles

CSIR Research Space (South Africa)

Ngwangwa, HM

2008-07-01

Full Text Available on the road and driver to assess the integrity of road and vehicle infrastructure. In this paper, vehicle vibration data are applied to an artificial neural network to reconstruct the corresponding road surface profiles. The results show that the technique...

Road construction on Caspar Creek watersheds --- 10-year report on impact

Science.gov (United States)

J. S. Krammes; David M. Burns

1973-01-01

In 1960, Federal and State agencies jointly started a long-term study of the effects of logging and road building on streamflow, sedimentation, aquatic habitat, and fish populations on two watersheds of Caspar Creek, in northern California. The experimental watersheds are the North and South Forks of the Creek. The data being collected consist of continuous streamflow...

Road design and environment : best practice on self-explaining and forgiving roads. Deliverable D3 of the RiPCORD-iSEREST project (Road Infrastructure Safety Protection - Core-Research and Development for Road Safety in Europe; Increasing safety and reliability of secondary roads for a sustainable Surface Transport).

NARCIS (Netherlands)

Matena, S. Louwerse, W. Schermers, G. Vaneerdewegh, P. Pokorny, P. Gaitanidou, L. Elvik, R. & Cardoso, J.

2009-01-01

Main objective of work-package 3 of Ripcord-lserest was to collect information on best practices concerning the design of self-explaining and forgiving roads. In order to gain an overview on existing practises on road categorisation and the layout of typical rural roads a questionnaire survey had

New innovative educational method to prevent accidents involving young road users (aged 15-24 – European Road Safety Tunes

Directory of Open Access Journals (Sweden)

Jankowska-Karpa Dagmara

2017-01-01

Full Text Available The article presents a new teaching method designed to improve road safety among young road users. Developed under “European Road Safety Tunes”, this international project was cofunded by EU DG MOVE. Its main aim is to improve road safety and minimize the number of road accidents, injuries and fatalities among road users who are 15-24 years old. The Safety Tunes method contains a series of workshops addressed to young vocational school students: cyclists, moped and motor riders and car drivers. The workshops incorporate peer and emotive education, and delivery of road safety related messages through different types of artistic forms. The topics tackled during class address awareness of possible risks and risk-behaviour, prevention of distraction and reduction in young fatalities and serious injuries on the road. All actions within the project are evaluated, both in terms of the impact of the workshops on students’ attitudes towards road safety problems and in terms of process assessment.

Analysis of Individual and Environmental Factors for Road Traffic Accidents in Sirjan-Bandarabbas Road between 2010 and 2011, Iran

Directory of Open Access Journals (Sweden)

Ghorbanali Mohammadi

2016-10-01

Full Text Available Sirjan -Bandarabbas road is one of the important commercial roads in Iran and for Sirjan’s area situation and relevance between Sirjan and other states in Iran so high percentage of goods that forwarded from Bandarabbas to other states transit from Sirjan .Therefore this road is as one important transition road and traffic road too .This study analyzed road traffic accidents were occurred between 2010 and 201in Sirjan- Bandarabbas road. Individual and demographic factors include Time of accidents, Drivers age, time of the days, seat belt and safety laws, Guilty vehicle, Mode of accident and education Level. Time of day analyses suggested that the highest percentage of road traffic injuries occurred in the time group between 12-18 hours. Drivers with the age group of 36-50 had more involvement in death accidents. The findings of this study also revealed that most of the collisions was front to back and front to side. Female drivers were found to be generally safer drivers than their male counterparts; male drivers had a higher involvement rate in road traffic accidents. This study indicated that Observe safety laws, Guilty vehicle and Mode of accidents have a meaningful relationship with Type of accidents in road traffic accidents in Sirjan Bandarabbas road.

Experimental and numerical assessment of on-road diesel and biodiesel emissions

Energy Technology Data Exchange (ETDEWEB)

West, B.H.; Storey, J.M.; Lewis, S.A.; Devault, G.L.; Green, J.B. [Oak Ridge National Lab., TN (United States); Sluder, C.S.; Hodgson, J.W.; Moore, B.L. [Univ. of Tennessee, Knoxville, TN (United States)

1997-12-31

The Federal Highway Administration`s TRAF-series of models use modal data to estimate fuel consumption and emissions for different traffic scenarios. A process for producing data-based modal models from road and dynamometer measurements has been developed and applied to a number of light-duty gasoline vehicles for the FHWA. The resulting models, or lookup tables, provide emissions and fuel consumption as functions of vehicle speed and acceleration. Surface plots of the data provide a valuable visual benchmark of the emissions characteristics of the vehicles. Due to the potential fuel savings in the light-duty sector via introduction of diesels, and the concomitant growing interest in diesel engine emissions, the measurement methodology has been extended under DOE sponsorship to include a diesel pickup truck running a variety of fuels, including number 2 diesel fuel, biodiesel, Fischer-Tropsch, and blends.

Development and enhancement of road lighting principles

Energy Technology Data Exchange (ETDEWEB)

Ekrias, A.

2010-07-01

The work starts with a short introduction concerning the history of road lighting, outlining the trends and changes that have taken place in road lighting research during the past century. The introduction is followed by a review of trends, directions, and problems in current road lighting research and practice. The following part of the work introduces an advanced approach to road lighting measurements and calculations, based on the use of an imaging luminance photometer and the Road LumiMeter v2.0 computer program. The work sets out to investigate the variations in the characteristics of the quality of the road lighting at the same pilot locations in relation to the calculation methods used. In the work mesopic visual performance and the effects of the spectral transmittance of the vehicle windshield on the visibility conditions of the driver are also analysed. The work continues with road lighting measurements in various weather conditions in order to study the effects of snowy and wet road surface conditions on road lighting luminances. The results show that in Finland, snowy conditions offer very good opportunities to save electricity without adversely affecting either the safety of driving or the quality of road lighting. The following measurements set out to investigate the contribution of halogen and high-intensity discharge headlights to road lighting and whether this has a conflicting effect on the luminance contrasts of various targets located on the road or at the side of the road. The results indicate that, in general, the use of vehicle headlights in the presence of road lighting reduces the luminance contrasts of targets. The work continues with road lighting visibility experiments which study the visibility of achromatic and coloured targets in MH lamp and HPS lamp installations. The results show that colours have a major effect on target visibility if the road is illuminated with a light source with adequate colour rendering properties. Finally

Tourist Assessment of Croatian Roads

Directory of Open Access Journals (Sweden)

Joso Vurdelja

2012-10-01

Full Text Available As environmentally clean industry and as the most significantworld industry regarding the number of employees and theimpact on the social and economic development of a countTy,tourism represents an extremely important social and economicbranch for Croatia.As a functional unit of the mutually interweaving socialand economic relations, tourism is a complex phenomenonwhose development depends on a number of compatible factorsout of which the transport infrastructure is considered to bethe most obvious and almost the most significant one, i.e. thefirst among the equal. This is primarily true for road traffic infrastructure,since road trai!Sportation of tourists by passengercars, buses and motorcycles accounts for more than 90 percentof the overall tourist journeys in Croatia.The topic of this paper is precisely, among other things, thetourist assessment of the Croatian road network by means ofthe so-called econometric model regarding the contribution ofa certain road route to the overall tourist traffic.Practical implementation of the elaborated problematicshould result in the improvement of road infrastructure eitherby constructing new motonvays and/or roads, or by reconstructionand/or modernisation of the existing traffic routes.

How Long Do the Dead Survive on the Road? Carcass Persistence Probability and Implications for Road-Kill Monitoring Surveys

OpenAIRE

Santos, Sara; Carvalho, Filipe; Mira, António

2011-01-01

Background: Road mortality is probably the best-known and visible impact of roads upon wildlife. Although several factors influence road-kill counts, carcass persistence time is considered the most important determinant underlying underestimates of road mortality. The present study aims to describe and model carcass persistence variability on the road for different taxonomic groups under different environmental conditions throughout the year; and also to assess the eff...

Using CART to segment road images

Science.gov (United States)

Davies, Bob; Lienhart, Rainer

2006-01-01

The 2005 DARPA Grand Challenge is a 132 mile race through the desert with autonomous robotic vehicles. Lasers mounted on the car roof provide a map of the road up to 20 meters ahead of the car but the car needs to see further in order to go fast enough to win the race. Computer vision can extend that map of the road ahead but desert road is notoriously similar to the surrounding desert. The CART algorithm (Classification and Regression Trees) provided a machine learning boost to find road while at the same time measuring when that road could not be distinguished from surrounding desert.

Road diet informational guide.

Science.gov (United States)

2014-11-01

A classic Road Diet converts an existing four-lane undivided roadway segment to a three-lane segment consisting of two : through lanes and a center two-way left turn lane (TWLTL). A Road Diet improves safety by including a protected left-turn lane : ...

ERGONOMICS AND ROAD SAFETY

NARCIS (Netherlands)

BROOKHUIS, K; BROWN, [No Value

1992-01-01

Modifications to the design of vehicles and road infrastructures have improved road safety significantly over the past decades, but all such developments depend upon user acceptance and institutional backing for their success. New R&D programmes combining ergonomic and engineering approaches are

Design and testing of an innovative measurement device for tyre-road contact forces

Science.gov (United States)

Cheli, F.; Braghin, F.; Brusarosco, M.; Mancosu, F.; Sabbioni, E.

2011-08-01

The measurement of tyre-road contact forces is the first step towards the development of new control systems for improving vehicle safety and performances. Tyre-road contact forces measurement systems are very expensive and significantly modify the unsprung masses of the vehicle as well as the rotational inertia of the tyres. Thus, vehicle dynamics results are significantly affected. As a consequence, the measured contact forces do not correspond to the contact forces under real working conditions. A new low-cost tyre-road contact forces measurement system is proposed in this paper that can be applied to passenger cars. Its working principle is based on the measurement of three deformations of the wheel rim through strain gauges. The tyre-rim assembly is thus turned into a sensor for tyre-road contact forces. The influence of the strain gauges position onto the measurement results has been assessed through finite element simulations and experimental tests. It has been proven that, for a large variety of rims, the strain gauge position that leads to high signal-to-noise ratios is almost the same. A dynamic calibration procedure has been developed in order to allow the reconstruction of contact force and torque components once per wheel turn. The capability of the developed device to correctly estimate tyre-road contact forces has been assessed, in a first stage, through indoor laboratory experimental test on an MTS Flat-Trac ® testing machine. Results show that the implemented measuring system allows to reconstruct contact forces once per wheel turn with a precision that is comparable to that of existing high-cost measurement systems. Subsequently, outdoor tests with a vehicle having all four wheels equipped with the developed measuring device have also been performed. Reliability of the measurements provided by the developed sensor has been assessed by comparing the global measured longitudinal/lateral forces and the product of the measured longitudinal

Hydrologic Impact of Harvesting and Road Construction in Mountainous Regime of Pacific Northwest

Science.gov (United States)

Du, E.; Hubbart, J.; Gravelle, J.; Link, T.

2006-12-01

The impact of forest management practices on hydrologic flow regimes have been debated for years. Vegetation removal and forest road construction are two anthropogenic disturbances that may affect watershed hydrology. The Mica Creek Experimental Watershed (MCEW), ID was initiated by Potlatch Corporation in 1990 to evaluate how contemporary forest harvest practices may impact water flows, quality and aquatic health. The study was recently expanded to identify the specific mechanisms producing the observed flow responses. The extensive and long term monitoring program in MCEW enables the validation of simulated internal watershed processes, thereby increasing our confidence in the ability of models to simulate the hydrologic effects of land cover change. The spatially-distributed, physically-based Distributed Hydrology Soil Vegetation Model (DHSVM), will be used to deconvolve the effects of canopy change, forest road construction, and climate variability in MCEW. First, the model performance will be assessed for pre-harvest, post-road, and post-harvest experimental periods. The model will then be used to explore how the flow regime would be expected to differ under historical, alternative management and future scenarios. A retrospective study of fully-harvested and increased forest road density (as opposed to current road density of 3 to 5 percent by surface area) will be compared with contemporary management practices. The impact of harvest patterns on sub-catchment flows will be assessed to understand the degree to which flow synchronization or desynchronization on confluent streams might affect cumulative downstream flow regime. Future scenarios will assess the potential impact of climatic variability that is expected to raise the transient snow zone and increase the wintertime rain to snow ratios in the Pacific Northwest. Variables such as harvest patterns and climate variation will be manipulated to project whether the hydrologic effects of land cover and

Exploring schema-driven differences in situation awareness between road users: an on-road study of driver, cyclist and motorcyclist situation awareness.

Science.gov (United States)

Salmon, Paul M; Lenne, Michael G; Walker, Guy H; Stanton, Neville A; Filtness, Ashleigh

2014-01-01

Collisions between different road users make a substantial contribution to road trauma. Although evidence suggests that different road users interpret the same road situations differently, it is not clear how road users' situation awareness differs, nor is it clear which differences might lead to conflicts. This article presents the findings from an on-road study conducted to examine driver, motorcyclist and cyclist situation awareness in different road environments. The findings suggest that, in addition to minor differences in the structure of different road users' situation awareness (i.e. amount of information and how it is integrated), the actual content of situation awareness in terms of road user schemata, the resulting interaction with the world and the information underpinning situation awareness is markedly different. Further examination indicates that the differences are likely to be compatible along arterial roads, shopping strips and at roundabouts, but that they may create conflicts between different road users at intersections. Interventions designed to support compatible situation awareness and behaviour between different road users are discussed.

Construction and maintenance of underground mine roads

Energy Technology Data Exchange (ETDEWEB)

Logan, A.S.; Seedsman, R.W. [Coffey Partners International Pty. Ltd. (Australia)

1995-12-31

Good roads are essential in moving men and materials to and from the underground workplace. An underground coal industry funded project was recently completed on underground mine road construction and maintenance. This paper discusses practical approaches to construction and maintenance of underground mine roads using transferable civil technologies and innovative techniques. Mine pavements are generally low-cost (relative to civil roads), constructed to varying standards using locally available materials to best meet the mobility needs of the mine. Performance of pavements is thus largely dependent on the environmental conditions, quality of the available road making materials, maintenance policies and available resources. This paper explains the causes of bad roads in various underground environments. It details available management strategies, construction and water control techniques, road maintenance and vehicle considerations. It concludes that the trend to larger rubber tires mining equipment needs to be matched with construction and maintenance of high quality road surfaces. For large operations, the total cost due to poor roads may equate to in excess of $A1 million per annum. The strategies outlined in this paper provide the basis for construction and maintenance of underground mine roads to help achieve desired production targets. (author). 2 tabs., 4 figs., 7 refs.

Seismic risk assessment for road in Indonesia

Science.gov (United States)

Toyfur, Mona Foralisa; Pribadi, Krishna S.

2016-05-01

Road networks in Indonesia consist of 446,000 km of national, provincial and local roads as well as toll highways. Indonesia is one of countries that exposed to various natural hazards, such as earthquakes, floods, landslides, etc. Within the Indonesian archipelago, several global tectonic plates interact, such as the Indo-Australian, Pacific, Eurasian, resulting in a complex geological setting, characterized by the existence of seismically active faults and subduction zones and a chain of more than one hundred active volcanoes. Roads in Indonesia are vital infrastructure needed for people and goods movement, thus supporting community life and economic activities, including promoting regional economic development. Road damages and losses due to earthquakes have not been studied widely, whereas road disruption caused enormous economic damage. The aim of this research is to develop a method to analyse risk caused by seismic hazard to roads. The seismic risk level of road segment is defined using an earthquake risk index, adopting the method of Earthquake Disaster Risk Index model developed by Davidson (1997). Using this method, road segments' risk level can be defined and compared, and road risk map can be developed as a tool for prioritizing risk mitigation programs for road networks in Indonesia.

Vehicle speed control using road bumps

Directory of Open Access Journals (Sweden)

T. A. O. Salau

2004-06-01

Full Text Available Road bumps play a crucial role in enforcing speed limits, thereby preventing overspeeding of vehicles. It significantly contributes to the overall road safety objective through the prevention of accidents that lead to deaths of pedestrians and damage of vehicles. Despite the importance of road bumps, very little research has been done to investigate into their design. While documentation exists on quantitative descriptions of road bumps, they offer little guidance to decision making. This work presents a unique approach to solving road bumps design problems. The results of our study reveal three important road bumps variables that influence the control of vehicle speeds. The key variables are bump height, bump width, and effective distance between two consecutive road bumps. Since vehicle speed control is the ultimate aim of this study the relationship between vehicle speed and other variables earlier mentioned is established. Vehicle speed is defined as the product of frequency at which a vehicle is moving over road bumps and the sum of effective distance between two consecutive road bumps. In the determination of bump height we assume a conical shaped curve for analysis as a matter of research strategy. Based on this, two stages of motion were analysed. The first concerns the motion over the bump itself while the second relates to the motion between two consecutive road bumps. Fourier series was then used to formulate a holistic equation that combines these two stages. We used trigonometric functions to model the behaviour of the first stage while with the second stage giving a functional value of zero since no changes in height are observed. We carried out vibration analysis to determine the effect of road bumps on a vehicular system. Arising from this a model component is referred to as an isolation factor. This offers guidance to the safe frequency at which vehicles could travel over road bumps. The work appears to contribute to knowledge

Recognizablility of rural roads in the Netherlands.

NARCIS (Netherlands)

Aarts, L.T. & Davidse, R.J.

2008-01-01

In the Netherlands, the Sustainable Safety vision is an important guide in improving road safety. It is considered that the road environment shouldconform to the expectations of road users in order to prevent errors thatcould lead to road crashes. These expectations are based on the characteristics

SmartRoads: training Indonesian workers to become road safety ambassadors in industrial and community settings.

Science.gov (United States)

Montero, Kerry; Spencer, Graham; Ariens, Bernadette

2012-06-01

This paper reports on a programme to improve road safety awareness in an industrial community in the vicinity of Jakarta, in Indonesia. Adapting the model of a successful community and school-based programme in Victoria, in Australia, and using a peer education approach, 16 employees of a major manufacturing company were trained to implement road safety education programmes amongst their peers. Specific target groups for the educators were colleagues, schools and the local community. Over 2 days the employees, from areas as diverse as production, public relations, personnel services, administration and management, learned about road safety facts, causes of traffic casualties, prevention approaches and peer education strategies. They explored and developed strategies to use with their respective target groups and practised health education skills. The newly trained workers received certificates to acknowledge them as 'SmartRoads Ambassadors' and, with follow-up support and development, became road safety educators with a commitment and responsibility to deliver education to their respective work and local communities. This paper argues that the model has potential to provide an effective and locally relevant response to road safety issues in similar communities.

[Accidents on Iceland's most dangerous roads].

Science.gov (United States)

Bjarnason, Thóroddur; Arnarsson, Sveinn

2012-02-01

The objective of this paper was to identify the most dangerous segments of the Icelandic road system in terms of the number of accidents pr km and the rate of accidents pr million km travelled. First to identify the segments where the number of accidents is highest and where the risk of the individual traveller is the greatest. Second to evaluate if the association between the number and the rate of accidents is positive or negative. Third to identify the road segments that are the most dangerous in the sense of many accidents and great risk to individual travellers. Main roads outside urban centers were divided into 45 segments that were on average 78 km in length. Infrequently travelled roads and roads within urban centers were omitted. Information on the length of roads, traffic density and number of accidents was used to calculate the number of accidents per km and the rate of accidents per million km travelled. The correlation between the number and rate of accidents was calculated and the most dangerous road segments were identified by the average rank order on both dimensions. Most accidents pr km occurred on the main roads to and from the capital region, but also east towards Hvolsvöllur, north towards Akureyri and in the Mideast region of the country. The rate of accidents pr million km travelled was highest in the northeast region, in northern Snæfellsnes and in the Westfjords. The most dangerous roads on both dimensions were in Mideast, northern Westfjords, in the north between Blönduós and Akureyri and in northern Snæfellsnes. Most accidents pr km occurred on roads with a low accident rate pr million km travelled. It is therefore possible to reduce accidents the most by increasing road safety where it is already the greatest but that would however increase inequalities in road safety. Policy development in transportation is therefore in part a question of priorities in healthcare. Individual equality in safety and health are not always fully

Gender Stereotypes among Road Users

Directory of Open Access Journals (Sweden)

Kabalevskaya, Alexandra I.

2013-09-01

Full Text Available This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ — at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female driving differ from each other in terms of speed, intensity and roughness; and identified the conditions and mechanisms underlying the actualization of gender stereotypes. Based on video and audio materials, we have found that drivers’ gender-specific behavioural features are perceivable to road users: such features trigger the actualization of gender stereotypes as attributive schemes, which determine the interaction between road users, while also laying the foundation for gender stereotypes.

Road Transport Entrepreneurs and Road Transportation Revolution ...

African Journals Online (AJOL)

Toshiba

upon a massive road-building programme throughout the colony. The rapid expansion ..... transportation problems of his textile customers and palm produce producers and ... unflinching loyalty and solidarity with their illustrious son, General.

PROPOSAL OF VOIVODESHIP ROAD SAFETY IMPROVEMENT PROGRAMME

OpenAIRE

Tomasz SZCZURASZEK; Jan KEMPA

2016-01-01

The article presents a proposal of the ‘GAMBIT KUJAWSKO-POMORSKI’ Road Safety Improvement Programme. The main idea of the Programme is to establish and initiate systems that will be responsible for the most important areas of activity within road safety, including road safety control, supervision, and management systems in the whole Voivodeship. In total, the creation and start of nine such systems has been proposed, namely: the Road Safety Management, the Integrated Road Rescue Service, the ...

Safety impacts of rural road construction

Science.gov (United States)

2001-02-01

Crash data in Kentucky show that the fatal crash rate on two-lane rural roads is substantially higher than on any other type of road. Improvements have been proposed at some locations on this type of road which involve either upgrading the existing t...

Psychological aspects of road user behaviour

NARCIS (Netherlands)

Rothengatter, J.A.

The behaviour of road users is an important factor in accident causation. Traffic psychology, defined as ''the study of the behaviour of road users and the psychological processes underlying that behaviour'', attempts to identify the determinants of road user behaviour with the aim of developing

Nonfatal road traffic injuries: can road safety campaigns prevent hazardous behavior? An Italian experience.

Science.gov (United States)

Zampetti, R; Messina, G; Quercioli, C; Vencia, F; Genco, L; Di Bartolomeo, L; Nante, N

2013-01-01

Road traffic injuries are a widespread problem and are very difficult to prevent. The purpose of this study was to verify whether intensive versus basic road safety education programs are associated with different incidence and severity of nonfatal road injuries. The study had an ecological design and involved Local Health Authority One (LHA1) in Salerno, Italy, which includes 20 municipalities. Data on nonfatal road injuries occurring in the periods June to August 2003 and June to August 2008 were obtained from trained operators through the information system of the emergency department. All 20 municipalities received a basic community road safety education program (publicity campaign using bill-posting, brochures, mass media communication with press conferences, articles in local papers, radio and television interviews, and a dedicated LHA1 web site), and 12 municipalities also received an intensive education campaign (in secondary schools, community conferences, and activities organized by police and firefighters). The incidence and severity of nonfatal road traffic injuries were compared between June to August 2003 (before the campaign) and June to August 2008. The total number of injuries in all 20 municipalities in 2003 and 2008 was 907 and 755, respectively. The incidence of injuries decreased in the study period both in the 8 municipalities where only the basic campaign was run (difference in incidence = -0.4; P = .053) and in the 12 municipalities where the intensive campaign was implemented (difference in incidence = -0.5; P road safety education. This does not mean that such campaigns are useless (they are important to raise awareness) but that they should be supplemented with complementary activities in order to be really effective.

Global patterns of current and future road infrastructure

Science.gov (United States)

Meijer, Johan R.; Huijbregts, Mark A. J.; Schotten, Kees C. G. J.; Schipper, Aafke M.

2018-06-01

Georeferenced information on road infrastructure is essential for spatial planning, socio-economic assessments and environmental impact analyses. Yet current global road maps are typically outdated or characterized by spatial bias in coverage. In the Global Roads Inventory Project we gathered, harmonized and integrated nearly 60 geospatial datasets on road infrastructure into a global roads dataset. The resulting dataset covers 222 countries and includes over 21 million km of roads, which is two to three times the total length in the currently best available country-based global roads datasets. We then related total road length per country to country area, population density, GDP and OECD membership, resulting in a regression model with adjusted R 2 of 0.90, and found that that the highest road densities are associated with densely populated and wealthier countries. Applying our regression model to future population densities and GDP estimates from the Shared Socioeconomic Pathway (SSP) scenarios, we obtained a tentative estimate of 3.0–4.7 million km additional road length for the year 2050. Large increases in road length were projected for developing nations in some of the world’s last remaining wilderness areas, such as the Amazon, the Congo basin and New Guinea. This highlights the need for accurate spatial road datasets to underpin strategic spatial planning in order to reduce the impacts of roads in remaining pristine ecosystems.

Ultra Low Noise Poroelastic Road Surfaces

Directory of Open Access Journals (Sweden)

Jerzy A. Ejsmont

2016-04-01

Full Text Available Noise is one of the most important environmental problems related to road traffic. During the last decades, the noise emitted by the engines and powertrains of vehicles was greatly reduced and tires became a clearly dominant noise source. The article describes the concept of low noise poroelastic road surfaces that are composed of mineral and rubber aggregate bound by polyurethane resin. Those surfaces have a porous structure and are much more flexible than standard asphalt or cement concrete pavements due to high content of rubber aggregate and elastic binder. Measurements performed in several European countries indicate that such surfaces decrease tire/road noise between 7 dB and 12 dB with respect to reference surfaces such as dense asphalt concrete or stone matrix asphalt. Furthermore, poroelastic road surfaces ascertain the rolling resistance of car tires, which is comparable to classic pavements. One of the unforeseen properties of the poroelastic road surfaces is their ability to decrease the risks related to car fires with fuel spills. The article presents the road and laboratory results of noise, rolling resistance, and fire tests performed on a few types of poroelastic road surfaces.

Tyre-road friction coefficient estimation based on tyre sensors and lateral tyre deflection: modelling, simulations and experiments

Science.gov (United States)

Hong, Sanghyun; Erdogan, Gurkan; Hedrick, Karl; Borrelli, Francesco

2013-05-01

The estimation of the tyre-road friction coefficient is fundamental for vehicle control systems. Tyre sensors enable the friction coefficient estimation based on signals extracted directly from tyres. This paper presents a tyre-road friction coefficient estimation algorithm based on tyre lateral deflection obtained from lateral acceleration. The lateral acceleration is measured by wireless three-dimensional accelerometers embedded inside the tyres. The proposed algorithm first determines the contact patch using a radial acceleration profile. Then, the portion of the lateral acceleration profile, only inside the tyre-road contact patch, is used to estimate the friction coefficient through a tyre brush model and a simple tyre model. The proposed strategy accounts for orientation-variation of accelerometer body frame during tyre rotation. The effectiveness and performance of the algorithm are demonstrated through finite element model simulations and experimental tests with small tyre slip angles on different road surface conditions.

23 CFR 660.517 - Maneuver area roads.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Maneuver area roads. 660.517 Section 660.517 Highways... PROGRAMS (DIRECT FEDERAL) Defense Access Roads § 660.517 Maneuver area roads. (a) Claims by a highway agency for costs incurred to restore, to their former condition, roads damaged by maneuvers involving a...

Case study: the Argentina Road Safety Project: lessons learned for the decade of action for road safety, 2011-2020.

Science.gov (United States)

Raffo, Veronica; Bliss, Tony; Shotten, Marc; Sleet, David; Blanchard, Claire

2013-12-01

This case study of the Argentina Road Safety Project demonstrates how the application of World Bank road safety project guidelines focused on institution building can accelerate knowledge transfer, scale up investment and improve the focus on results. The case study highlights road safety as a development priority and outlines World Bank initiatives addressing the implementation of the World Report on Road Traffic Injury's recommendations and the subsequent launch of the Decade of Action for Road Safety, from 2011-2020. The case study emphasizes the vital role played by the lead agency in ensuring sustainable road safety improvements and promoting the shift to a 'Safe System' approach, which necessitated the strengthening of all elements of the road safety management system. It summarizes road safety performance and institutional initiatives in Argentina leading up to the preparation and implementation of the project. We describe the project's development objectives, financing arrangements, specific components and investment staging. Finally, we discuss its innovative features and lessons learned, and present a set of supplementary guidelines, both to assist multilateral development banks and their clients with future road safety initiatives, and to encourage better linkages between the health and transportation sectors supporting them.

Dynamics of vehicle-road coupled system

CERN Document Server

Yang, Shaopu; Li, Shaohua

2015-01-01

Vehicle dynamics and road dynamics are usually considered to be two largely independent subjects. In vehicle dynamics, road surface roughness is generally regarded as random excitation of the vehicle, while in road dynamics, the vehicle is generally regarded as a moving load acting on the pavement. This book suggests a new research concept to integrate the vehicle and the road system with the help of a tire model, and establishes a cross-subject research framework dubbed vehicle-pavement coupled system dynamics. In this context, the dynamics of the vehicle, road and the vehicle-road coupled system are investigated by means of theoretical analysis, numerical simulations and field tests. This book will be a valuable resource for university professors, graduate students and engineers majoring in automotive design, mechanical engineering, highway engineering and other related areas. Shaopu Yang is a professor and deputy president of Shijiazhuang Tiedao University, China; Liqun Chen is a professor at Shanghai Univ...

CLEAN-ROADS project: air quality considerations after the application of a novel MDSS on winter road maintenance activities

Science.gov (United States)

Pretto, Ilaria; Malloci, Elisa; Tonidandel, Gabriele; Benedetti, Guido; Di Napoli, Claudia; Piazza, Andrea; Apolloni, Roberto; Cavaliere, Roberto

2016-04-01

With this poster we present the environmental benefit on air quality derived by the application of the CLEAN-ROADS pilot project. The CLEAN-ROADS project addresses the problem of the environmental pollution caused by de-icing salts during winter road maintenance activities in the Province of Trento (Italy). A demonstrative Maintenance Decision Support System (MDSS) has been developed in order to improve the intervention procedures of the road management service. Specifically it aims to optimize the efficiency of how available resources (e.g., salt consumption) are currently used while guaranteeing the current level of road safety. The CLEAN-ROADS project has been tested and validated on a test area located in a valley bottom (Adige Valley), where the highest optimization margins are to be expected. The project supports current road maintenance practices, which has proved to be reliable and accurate, with a new scalable and energy-efficient road monitoring system. This system is based on a network of road weather stations (road weather information system, RWIS) installed on the test route. It is capable to collect real-time data about the road conditions and to perform short-term and now-cast road weather forecasts, which actively integrate weather data and bulletins covering the target area [1]. This poster presents the results obtained from a three-year monitoring activity with the aim to (1) determine the impact of de-icing salts on air quality and (2) quantify the improvements obtained by the application of the CLEAN-ROADS project on air quality. The Ambient Air Quality and Cleaner Air for Europe Directive (2008/50/EC) states that contributions to exceedances of particulate matter PM10 limit values that are attributable to road winter salting may be subtracted when assessing compliance with air quality limit values, once provided that reasonable measures have been taken to lower concentrations [2]. As the de-icing salts used in road maintenance are mainly based

Study on the Road Traffic Survey System Based on Micro-ferromagnetic Induction Coil Sensor

Directory of Open Access Journals (Sweden)

Liang Tong

2014-05-01

Full Text Available Road traffic information is the basis of road traffic management and control. Due to the special design of the sensor coil and ferromagnetic core, traffic survey system which uses micro ferromagnetic inductive coil vehicle detector, not only has the features of small size, simple installation and little road surface damage, but also has the advantages of output signal strength, simple signal processing circuit and obvious characteristics for output waveform corresponding vehicle feature. Based on the introduction of the sensor working principle, the construction of hardware and signal processing circuit for the traffic survey system is described in detail in the paper. Combined with the characteristics of the sensor output waveform, adaptive nearest neighbor clustering RBF neural network algorithm used to classify the vehicles is proposed and verified by experimental method. The result has a high vehicle classification rate and demonstrates the feasibility of the system.

Road Zone Effects in Small-Mammal Communities

Directory of Open Access Journals (Sweden)

John A. Bissonette

2009-06-01

Full Text Available Our study focused on the putative effects of roads on small-mammal communities in a high desert region of southern Utah. Specifically, we tested whether or not roads create adjacent zones characterized by lower small- mammal densities, abundance, and diversity. We sampled abundance of small mammals at increasing distances from Interstate 15 during two summers. We recorded 11 genera and 13 species. We detected no clear abundance, density, or diversity effects relative to distance from the road. Only two of 13 species were never captured near roads. The abundance of the remaining 11 small mammal species was either similar at different distances from the road or higher closer to the road. We conclude that although roads may act as barriers and possible sources of mortality, adjacent zones of vegetation often provide favorable microhabitat in the desert landscape for many small mammals.

Response of moose to a high‐density road network

Science.gov (United States)

Wattles, David W.; Zeller, Katherine A.; DeStefano, Stephen

2018-01-01

Road networks and the disturbance associated with vehicle traffic alter animal behavior, movements, and habitat selection. The response of moose (Alces americanus) to roads has been documented in relatively rural areas, but less is known about moose response to roads in more highly roaded landscapes. We examined road‐crossing frequencies and habitat use of global positioning system (GPS)‐collared moose in Massachusetts, USA, where moose home ranges have road densities approximately twice that of previous studies. We compared seasonal road‐crossing frequencies of moose with a null movement model. We estimated moose travel speeds during road‐crossing events and compared them with speeds during other home range movements. To estimate the extent of the road effect zone and determine how roads influenced moose habitat use, we fit a third‐order resource selection function. With the exception of the lowest use road class (roads less than expected based on the null movement model and frequency decreased with increasing road size and traffic. Moose crossed roads faster than they traveled during other times. This effect increased with increasing road use intensity. Overall, roads were a major factor determining what portions of Massachusetts moose used and how they moved among habitat patches. Our results suggest that moose in Massachusetts can adapt to a high‐density road network, but the road effect is still strongly negative and, in some cases, is more pronounced than in study areas with lower road densities. Future road construction and the expansion of road networks may have a large effect on moose and other wildlife.

Road safety in Poland: magnitude, causes and injuries.

Science.gov (United States)

Goniewicz, Krzysztof; Goniewicz, Mariusz; Pawłowski, Witold; Fiedor, Piotr; Lasota, Dorota

2017-01-01

Road accidents are a serious problem of the modern world. They are one of the main causes of injuries and are the third most frequent cause of death. Every year, about one million people, adults and children, die on the roads and several millions get injured. Mortality rate due to injuries from road accidents amounts to 2.2% of all deaths in the world. The research presents epidemiology of road accidents in the period 2004-2015 with particular emphasis on the key issues of road safety in Poland, related to the dangerous behaviour of road users (disregard toward traffic rules). Between years 2004 and 2015 on Polish roads took place more than 508000 accidents with 53155 fatalities and more then 572000 casualties. Despite the various measures which are taken to improve safety on Polish roads, the number of dead and wounded in the vehicle mishap is still large, and losses borne by society are high. To improve safety on Polish roads, it is necessary to continue multi- action plan to systematically progress in the level of road safety.

Factors contributing to amphibian road mortality in a wetland

Directory of Open Access Journals (Sweden)

Haijun GU, Qiang DAI, Qian WANG, Yuezhao WANG

2011-12-01

Full Text Available To understand road characteristics and landscape features associated with high road mortality of amphibians in Zoige Wetland National Nature Reserve, we surveyed road mortality along four major roads after rainfall in May and September 2007. Road mortality of three species, Rana kukunoris, Nanorana pleskei and Bufo minshanicus, was surveyed across 225 transects (115 in May and 110 in September. Transects were 100 m long and repeated every two kilometers along the four major roads. We used model averaging to assess factors that might determine amphibian road mortality. We recorded an average of 24.6 amphibian road mortalities per kilometer in May and 19.2 in September. Among road characteristics, road width was positively associated with road morality for R. kukunori and B. minshanicus. Traffic volume also increased the road mortality of B. minshanicus in September. Of the landscape features measured, area proportions of three types of grassland (wet, mesic and dry within 1 km of the roads, particularly that of wet grassland, significantly increased road mortality for R. kukunori and total mortality across all three species. To most effectively reduce road mortality of amphibians in the Zoige wetlands, we suggest better road design such as avoiding wet grasslands, minimizing road width, underground passes and traffic control measures. The implementation of public transit in the area would reduce traffic volume, and hence mortality [Current Zoology 57 (6: 768–774, 2011].

Information technology road map 2015

International Nuclear Information System (INIS)

2009-09-01

This book introduces information technology road map 2015 with presentation, process, plan and conclusion of it. It also has introduction of IT road map by field : information technology road map 2015 on the next-generation of semiconductor, display, light emitting diode and light industry, home network and home electronic appliances, digital TV and broadcasting, radio technology, satellite communications, mobile communication for the next-generation, BcN field, software, computer for the next-generation and security of knowledge information.

Evaluation of a five-year Bloomberg Global Road Safety Program in Turkey.

Science.gov (United States)

Gupta, S; Hoe, C; Özkan, T; Lajunen, T J; Vursavas, F; Sener, S; Hyder, A A

2017-03-01

Turkey was included in the Bloomberg Philanthropies funded Global Road Safety Program (2010-14) with Ankara and Afyonkarahisar (Afyon) selected for interventions to manage speed and encourage seat-belt use. The objectives of this study are to present the monitoring and evaluation findings of seat-belt use and speed in Afyon and Ankara over the five years and to assess overall impact of the program on road traffic injury, and death rates in Turkey. Quasi-experimental before after without comparison. In collaboration with the Middle East Technical University, roadside observations and interviews were coupled with secondary data to monitor changes in risk factors and outcomes at the two intervention sites. The percentage of seat-belt use among drivers and front-seat passengers in Afyon and Ankara increased significantly between 2010 and 2014 with increased self-reported use and preceded by an increase in tickets (fines) for not using seat belts. There were uneven improvements in speed reduction. In Afyon, the average speed increased significantly from 46.3 km/h in 2012 to about 52.7 km/h in 2014 on roads where the speed limits were 50 km/h. In Ankara, the average speed remained less than 55 km/h during the program period (range: 50-54 km/h; P < 0.005) for roads where the speed limits were 50 km/h; however, the average speed on roads with speed limits of 70 km/h decreased significantly from 80.6 km/h in 2012 to 68.44 km/h in 2014 (P < 0.005). The program contributed to increase in seat-belt use in Afyon and Ankara and by drawing political attention to the issue can contribute to improvements in road safety. We are optimistic that the visible motivation within Turkey to substantially reduce road traffic injuries will lead to increased program implementation matched with a robust evaluation program, with suitable controls. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Spatial Analysis Methods of Road Traffic Collisions

DEFF Research Database (Denmark)

Loo, Becky P. Y.; Anderson, Tessa Kate

Spatial Analysis Methods of Road Traffic Collisions centers on the geographical nature of road crashes, and uses spatial methods to provide a greater understanding of the patterns and processes that cause them. Written by internationally known experts in the field of transport geography, the book...... outlines the key issues in identifying hazardous road locations (HRLs), considers current approaches used for reducing and preventing road traffic collisions, and outlines a strategy for improved road safety. The book covers spatial accuracy, validation, and other statistical issues, as well as link...

Investigation of road network features and safety performance.

Science.gov (United States)

Wang, Xuesong; Wu, Xingwei; Abdel-Aty, Mohamed; Tremont, Paul J

2013-07-01

The analysis of road network designs can provide useful information to transportation planners as they seek to improve the safety of road networks. The objectives of this study were to compare and define the effective road network indices and to analyze the relationship between road network structure and traffic safety at the level of the Traffic Analysis Zone (TAZ). One problem in comparing different road networks is establishing criteria that can be used to scale networks in terms of their structures. Based on data from Orange and Hillsborough Counties in Florida, road network structural properties within TAZs were scaled using 3 indices: Closeness Centrality, Betweenness Centrality, and Meshedness Coefficient. The Meshedness Coefficient performed best in capturing the structural features of the road network. Bayesian Conditional Autoregressive (CAR) models were developed to assess the safety of various network configurations as measured by total crashes, crashes on state roads, and crashes on local roads. The models' results showed that crash frequencies on local roads were closely related to factors within the TAZs (e.g., zonal network structure, TAZ population), while crash frequencies on state roads were closely related to the road and traffic features of state roads. For the safety effects of different networks, the Grid type was associated with the highest frequency of crashes, followed by the Mixed type, the Loops & Lollipops type, and the Sparse type. This study shows that it is possible to develop a quantitative scale for structural properties of a road network, and to use that scale to calculate the relationships between network structural properties and safety. Copyright © 2013 Elsevier Ltd. All rights reserved.

Tailpipe, resuspended road dust, and brake-wear emission factors from on-road vehicles

Science.gov (United States)

Abu-Allaban, Mahmoud; Gillies, John A.; Gertler, Alan W.; Clayton, Russ; Proffitt, David

Intensive mass and chemical measurements were performed at roadside locations in Reno, Nevada, and Durham/Research Triangle Park), North Carolina to derive tailpipe, resuspended road dust, and brake-wear emission factors from in-use vehicles. Continuous particulate matter (PM) data were utilized to derive total emission factors while integrated PM data were used to attribute the calculated emission factors to different mechanisms using chemical mass balance receptor modeling and scanning electron microscopy techniques. Resuspended road dust and tailpipe emissions were found to be the dominant mechanisms that contribute significantly to the total PM 10 and PM 2.5 emission factors, respectively. Small contributions from brake-wear were observed at locations where strong braking occurs, but no tire-wear was seen at any sampling location. PM 10 emission rates from light-duty spark ignition (LDSI) vehicles ranged from 40 to 780 mg/km, 10 to 70 mg/km, and 0 to 80 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 10 emission rates from heavy-duty vehicles ranged from 230 to 7800 mg/km, 60 to 570 mg/km, and 0 to 610 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 2.5 emission rates from LDSI vehicles ranged from 2 to 25 mg/km, 10 to 50 mg/km, and 0 to 5 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 2.5 emission rates from heavy-duty vehicles ranged from 15 to 300 mg/km, 60 to 480 mg/km, and 0 to 15 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively.

Distraction-related road traffic collisions

African Journals Online (AJOL)

drivers involved in road traffic collisions (RTC) were using mobile phones. Our study supports ... while driving. Keywords: Distraction, prevention, road traffic collision, mobile phone. ..... keeps us connected with others with great advantages.

Dynamic responses of connections in road safety barriers

International Nuclear Information System (INIS)

Bayton, D.A.F.; Long, R.; Fourlaris, G.

2009-01-01

Bolted road safety barrier connections utilise slotted holes that are perpendicular to the direction of the safety barrier beam. Due to the clearance between the slotted holes and the bolts, a varying amount of slippage is seen before contact with the edge of the slot is made. The stiffness characteristics of bolted road safety barrier connections have been examined with a representative test coupon that incorporates a full size safety barrier connection slot to industry standard dimensions. Previous research work has successfully determined the stiffness characteristics of the bolted connections at quasi-static strain rates. Representative non-linear finite element models of the bolted test coupons have been constructed. When compared to the laboratory results the initial stiffness, maximum force and displacement of the bolted connections are similar to the finite element model predictions. Current investigations have moved onto strain rates comparable to those observed in actual vehicle crash tests. Explicit dynamic finite element (FE) models have been constructed and validated, using experimental data produced using a series of high strain rate laboratory tests for a number of bolt configurations

Road icing forecasting and detecting system

Science.gov (United States)

Xu, Hongke; Zheng, Jinnan; Li, Peiqi; Wang, Qiucai

2017-05-01

Regard for the facts that the low accuracy and low real-time of the artificial observation to determine the road icing condition, and it is difficult to forecast icing situation, according to the main factors influencing the road-icing, and the electrical characteristics reflected by the pavement ice layer, this paper presents an innovative system, that is, ice-forecasting of the highway's dangerous section. The system bases on road surface water salinity measurements and pavement temperature measurement to calculate the freezing point of water and temperature change trend, and then predicts the occurrence time of road icing; using capacitance measurements to verdict the road surface is frozen or not; This paper expounds the method of using single chip microcomputer as the core of the control system and described the business process of the system.

Road Safety Education in a Science Course: Evaluation of "Science and the Road."

Science.gov (United States)

Gardner, Paul L.

1989-01-01

A traffic safety instructional package--"Science and the Road"--was assessed. It was designed by the Road Traffic Authority of Victoria (Australia) for use in tenth-grade science courses. Evaluation findings resulted in revision of the unit and implementation of more inservice courses for teachers lacking relevant biology and physics…

Kansas Road Centerline Fle (KRCF)

Data.gov (United States)

Kansas Data Access and Support Center — This version of the Kansas Road Centerline File (0801) represents the first effort to create a statewide roads layer from best available data sources. KGS integrated...

49 CFR 391.31 - Road test.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Road test. 391.31 Section 391.31 Transportation... COMBINATION VEHICLE (LCV) DRIVER INSTRUCTORS Tests § 391.31 Road test. (a) Except as provided in subpart G, a person shall not drive a commercial motor vehicle unless he/she has first successfully completed a road...

Multilayered complex network datasets for three supply chain network archetypes on an urban road grid.

Science.gov (United States)

Viljoen, Nadia M; Joubert, Johan W

2018-02-01

This article presents the multilayered complex network formulation for three different supply chain network archetypes on an urban road grid and describes how 500 instances were randomly generated for each archetype. Both the supply chain network layer and the urban road network layer are directed unweighted networks. The shortest path set is calculated for each of the 1 500 experimental instances. The datasets are used to empirically explore the impact that the supply chain's dependence on the transport network has on its vulnerability in Viljoen and Joubert (2017) [1]. The datasets are publicly available on Mendeley (Joubert and Viljoen, 2017) [2].

Use of wood ash for road stabilisation

International Nuclear Information System (INIS)

Lagerkvist, A.; Lind, B.

2009-01-01

Due to warmer winters in Sweden, the bearing capacity of forestry roads has become increasingly problematic in recent years. Road stabilization is needed in order to get timber out from the forests. This usually involves the addition of cement to the road body. However, wood ash is a possible substitute for cement because it has similar properties. Using wood ash has the added advantage of saving landfill space. This paper presented an ongoing laboratory study on leaching and mechanical stability, as well as frost-sensitivity using a 30 per cent ash addition to natural soils for reinforcing a forestry road near Timra in central Sweden. The road was being monitored with regard to environmental impact and mechanical properties. The paper discussed the potential of biofuel ashes and the increasing need to reinforce infrastructure due to climate change. The environmental impact from ash use in road constructions was then addressed. It was concluded that the application of ash in road construction would help to strengthen forest roads, make them more resistant to climatic change and render them accessible year-round. 32 refs., 3 tabs., 2 figs.

Gender Stereotypes among Road Users

OpenAIRE

Kabalevskaya, Alexandra I.

2013-01-01

This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ — at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female dr...

Gender stereotypes among road users

OpenAIRE

Dontsov, Alexander; Kabalevskaya, Alexandra

2013-01-01

This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female driv...

Scaling roads and wildlife: The Cinderella principle

Science.gov (United States)

Bissonette, J.A.

2002-01-01

It is clear that a reduction in both direct and indirect effects of roads and road networks must be the goal of management agencies. However, increased permeability of roaded landscapes can only be achieved by up-front planning and subsequent mitigative actions. The key is to understand that roads must be made permeable to the movement of animals. More profoundly, ecosystem services, i.e., clean water, clean air, uncontaminated soil, natural landscapes, recreation opportunities, abundant wildlife, and life sustaining ecological processes must not be seriously impacted. In other words, quality of life as measured by ecosystem services should be a major component of the planning process when roads are constructed or improved. Mitigative structures exist to increase permeability of roads. Wildlife overpasses and underpasses, often referred to as ecoducts or green bridges, with associated structures to enable larger animals to exit the road right of way, e.g., earthen escape ramps (BISSONETTE and HAMMER, 2001), various culvert designs for smaller animals including badger pipes and amphibian and reptile tunnels, and fish ladders are but a small sampling of the structures already in place around the world. What is needed is attention to the big picture. Landscapes need to be reconnected and made more permeable. Responsible agencies and organizations need to be aggressive about promoting mitigations and a conservation ethic into road planning. Only with a broad based effort between a concerned public, a database to work from, and a willingness of responsible agencies, will the now very large virtual footprint of roads and road networks be reduced to more closely approximate the physical footprint. By embracing the Cinderella Principle of making the virtual shoe fit more closely the actual physical footprint of roads, we will be able to achieve a closer connection with ecological harmony with its resultant effect of abundant wildlife.

Global collaboration on road traffic injury prevention.

Science.gov (United States)

Peden, Margie

2005-06-01

Worldwide, nearly 1.2 million people are killed in road traffic crashes every year and 20 million to 50 million more are injured or disabled. These injuries account for 2.1% of global mortality and 2.6% of all disability-adjusted life years (DALYs) lost. Low- and middle-income countries account for about 85% of the deaths and 90% of the DALYs lost annually. Without appropriate action, by 2020, road traffic injuries are predicted to be the third leading contributor to the global burden of disease. The economic cost of road traffic crashes is enormous. Globally it is estimated that US$518 billion is spent on road traffic crashes with low- and middle-income countries accounting for US$65 billion--more than these countries receive in development assistance. But these costs are just the tip of the iceberg. For everyone killed, injured or disabled by a road traffic crash there are countless others deeply affected. Many families are driven into poverty by the expenses of prolonged medical care, loss of a family breadwinner or the added burden of caring for the disabled. There is an urgent need for global collaboration on road traffic injury prevention. Since 2000, WHO has stepped up its response to the road safety crisis by firstly developing a 5-year strategy for road traffic injury prevention and following this by dedicating World Health Day 2004 to road safety and launching the WHO/World Bank World Report on Road Traffic Injury Prevention at the global World Health Day event in Paris, France. This short article highlights the main messages from the World Report and the six recommendations for action on road safety at a national and international level. It goes on to briefly discuss other international achievements since World Health Day and calls for countries to take up the challenge of implementing the recommendations of the World Report.

Multispectral Image Road Extraction Based Upon Automated Map Conflation

Science.gov (United States)

Chen, Bin

Road network extraction from remotely sensed imagery enables many important and diverse applications such as vehicle tracking, drone navigation, and intelligent transportation studies. There are, however, a number of challenges to road detection from an image. Road pavement material, width, direction, and topology vary across a scene. Complete or partial occlusions caused by nearby buildings, trees, and the shadows cast by them, make maintaining road connectivity difficult. The problems posed by occlusions are exacerbated with the increasing use of oblique imagery from aerial and satellite platforms. Further, common objects such as rooftops and parking lots are made of materials similar or identical to road pavements. This problem of common materials is a classic case of a single land cover material existing for different land use scenarios. This work addresses these problems in road extraction from geo-referenced imagery by leveraging the OpenStreetMap digital road map to guide image-based road extraction. The crowd-sourced cartography has the advantages of worldwide coverage that is constantly updated. The derived road vectors follow only roads and so can serve to guide image-based road extraction with minimal confusion from occlusions and changes in road material. On the other hand, the vector road map has no information on road widths and misalignments between the vector map and the geo-referenced image are small but nonsystematic. Properly correcting misalignment between two geospatial datasets, also known as map conflation, is an essential step. A generic framework requiring minimal human intervention is described for multispectral image road extraction and automatic road map conflation. The approach relies on the road feature generation of a binary mask and a corresponding curvilinear image. A method for generating the binary road mask from the image by applying a spectral measure is presented. The spectral measure, called anisotropy-tunable distance (ATD

Sediment deposition from forest roads at stream crossings as influenced by road characteristics

Science.gov (United States)

A.J. Lang; W.M. Aust; M.C. Bolding; K.J. McGuire

2015-01-01

Recent controversies associated with ditched forest roads and stream crossings in the Pacific Northwest have focused national attention on sediment production and best management practices (BMPs) at stream crossings. Few studies have quantified soil erosion rates at stream crossings as influenced by road characteristics and compared them to modeled rates. Soil erosion...

Intermediate Volatility Organic Compound Emissions from On-Road Gasoline Vehicles and Small Off-Road Gasoline Engines.

Science.gov (United States)

Zhao, Yunliang; Nguyen, Ngoc T; Presto, Albert A; Hennigan, Christopher J; May, Andrew A; Robinson, Allen L

2016-04-19

Dynamometer experiments were conducted to characterize the intermediate volatility organic compound (IVOC) emissions from a fleet of on-road gasoline vehicles and small off-road gasoline engines. IVOCs were quantified through gas chromatography/mass spectrometry analysis of adsorbent samples collected from a constant volume sampler. The dominant fraction (>80%, on average) of IVOCs could not be resolved on a molecular level. These unspeciated IVOCs were quantified as two chemical classes (unspeciated branched alkanes and cyclic compounds) in 11 retention-time-based bins. IVOC emission factors (mg kg-fuel(-1)) from on-road vehicles varied widely from vehicle to vehicle, but showed a general trend of lower emissions for newer vehicles that met more stringent emission standards. IVOC emission factors for 2-stroke off-road engines were substantially higher than 4-stroke off-road engines and on-road vehicles. Despite large variations in the magnitude of emissions, the IVOC volatility distribution and chemical characteristics were consistent across all tests and IVOC emissions were strongly correlated with nonmethane hydrocarbons (NMHCs), primary organic aerosol and speciated IVOCs. Although IVOC emissions only correspond to approximately 4% of NMHC emissions from on-road vehicles over the cold-start unified cycle, they are estimated to produce as much or more SOA than single-ring aromatics. Our results clearly demonstrate that IVOCs from gasoline engines are an important class of SOA precursors and provide observational constraints on IVOC emission factors and chemical composition to facilitate their inclusion into atmospheric chemistry models.

Virtual testing of speed reduction schemes on urban collector roads.

Science.gov (United States)

Domenichini, Lorenzo; Branzi, Valentina; Meocci, Monica

2018-01-01

Urban collector roads are complex driving environments often encompassing both the mobility and the access road functions. In these conditions motorized traffic and vulnerable road users compete continually. Speed reduction measures may play a relevant role in these contexts, provided that such measures are also designed in compliance with the driver's capabilities and expectations. The paper describes a test procedure using driving simulation experiments, designed to evaluate the reconfiguration project of Via Pistoiese, an urban road collector located in Florence (Italy). The road improvement design consisted of several engineering treatments aimed to reduce and homogenize the driving speed, as well as to manage the co-existence of the different road users and mainly to protect pedestrians. The main focus of the research was to understand if the drivers' behaviour was according to the design hypothesis before the safety treatments are implemented in the real world. Due to the multiple engineering treatments included in the reconfiguration project, the evaluation of the overall safety effectiveness of the project rather than the single treatment safety impact was the main concern of the research study. In addition, the study aimed to assess the usefulness of the considered testing method to understand how to integrate road design with drivers' performances, especially in heterogeneous traffic environments where drivers' behaviour plays a decisive role in the success of the proposed design solutions. Fifty-eight participants drove through two immersive virtual environments, reproducing the existing configuration and the project reconfiguration, while data relating to different driving aspects were collected. Two analyses were performed. The first was focused on the analysis of the mean speed profiles and revealed that the considered engineering treatments are able to control the speeding behaviour without providing a too high discomfort to the drivers. The second

Mayan Forest Road Projects

DEFF Research Database (Denmark)

Conde, Dalia Amor

2008-01-01

Road-building projects in the Mayan Biosphere Reserve to connect Mexico and Guatemala were subjected to a cost-benefit evaluation. Up to an estimated 311,000 hectares of jaguar habitat were found to be at risk of deforestation due to these projects. Some of the projects were shown to have negativ...... of continued conservation rather than road development....

BRICS: opportunities to improve road safety.

Science.gov (United States)

Hyder, Adnan A; Vecino-Ortiz, Andres I

2014-06-01

Brazil, the Russian Federation, India, China and South Africa--the countries known as BRICS--are currently undergoing a deep epidemiological transition that is mainly driven by rapid economic growth and technological change. The changes being observed in the distribution of the burden of diseases and injuries--such as recent increases in the incidence of road traffic injuries--are matters of concern. BRICS may need stronger institutional capacity to address such changes in a timely way. In this paper, we present data on road traffic injuries in BRICS and illustrate the enormous challenge that these countries currently face in reducing the incidence of such injuries. There is an urgent need to improve road safety indicators in every country constituting BRICS. It is imperative for BRICS to invest in system-wide road safety interventions and reduce the mortality and morbidity from road traffic injuries.

Roads Belong In the Urban Landscape

DEFF Research Database (Denmark)

Clemmensen, Thomas Juel

2012-01-01

In spite of being an essential part of the system of automobility and as such playing an important role in the development of urban landscapes, road networks seldom attracts much attention among architects involved in the planning and design of urban landscapes. One reason is probably found...... in the dominance of the zoning approach to planning, where road planning easily becomes isolated and reduced to a matter of traffic regulation and transport economy. Another possible reason could be, as suggested by the Australian landscape architect Christopher Sawyer, that road networks like other...... as landscape architects engage with road networks in profound ways, which moves beyond the purely visual and pictorial? Is it possible to conceptually (re)locate road networks in the landscape? The paper will address these questions by discussing different understandings of landscape and its relation...

A Fuel-Based Assessment of On-Road and Off-Road Mobile Source Emission Trends

Science.gov (United States)

Dallmann, T. R.; Harley, R. A.

2009-12-01

Mobile sources contribute significantly to emissions of nitrogen oxides (NOx) and fine particulate matter (PM2.5) in the United States. These emissions lead to a variety of environmental concerns including adverse human health effects and climate change. In the electric power sector, sulfur dioxide (SO2) and NOx emissions from power plants are measured directly using continuous emission monitoring systems. In contrast for mobile sources, statistical models are used to estimate average emissions from a very large and diverse population of engines. Despite much effort aimed at improving them, mobile source emission inventories continue to have large associated uncertainties. Alternate methods are needed to help evaluate estimates of mobile source emissions and quantify and reduce the associated uncertainties. In this study, a fuel-based approach is used to estimate emissions from mobile sources, including on-road and off-road gasoline and diesel engines. In this approach, engine activity is measured by fuel consumed (in contrast EPA mobile source emission models are based on vehicle km of travel and total amount of engine work output for on-road and off-road engines, respectively). Fuel consumption is defined in this study based on highway fuel tax reports for on-road engines, and from surveys of fuel wholesalers who sell tax-exempt diesel fuel for use in various off-road sectors such as agriculture, construction, and mining. Over the decade-long time period (1996-2006) that is the focus of the present study, national sales of taxable gasoline and diesel fuel intended for on-road use increased by 15 and 43%, respectively. Diesel fuel use by off-road equipment increased by about 20% over the same time period. Growth in fuel consumption offset some of the reductions in pollutant emission factors that occurred during this period. This study relies on in-use measurements of mobile source emission factors, for example from roadside and tunnel studies, remote sensing, and

Road geometry as a factor for musculoskeletal injuries due to road traffic accidents in Sub-Himalayan State of Himachal Pradesh

Directory of Open Access Journals (Sweden)

Sunil Kumar Raina

2017-01-01

Full Text Available Background: Road traffic accidents (RTAs kill 1.25 million people each year and injure between 20 and 50 million more people with many incurring a disability as a result of their injury. The road environment (design and geometry can affect driver speed choice, thereby increasing chances of accidents.Materials and Methods: Patients attending tertiary care center for musculoskeletal injuries after an RTA were enrolled in the study. The data were collected using a standard questionnaire. The details on the geometry of the road (type of road; highway or other, metaled or nonmetaled, straight, and curved were obtaine through inspection wherever possible. Results: Majority of the RTAs occurred on state highways (n = 154/313, 49.7% followed by national highways (NH (n = 94/313, 30%. Link roads account for comparatively less number (n = 65/313, 20.7% of cases. Majority of the accidents occurred on metaled road (n = 268, 85.6%; however, the association of different vehicles involved in RTA with the condition of road was not found to be significant statistically (P > 0.5. Further, the majority of the RTA occurred on straight roads (n = 204, 65.1%. Conclusion: Road geometry is an important factor in RTAs as drivers generally tend to choose their speed based on their perception of the appropriate speed for the road geometry.

Who is in control of road safety? A STAMP control structure analysis of the road transport system in Queensland, Australia.

Science.gov (United States)

Salmon, Paul M; Read, Gemma J M; Stevens, Nicholas J

2016-11-01

Despite significant progress, road trauma continues to represent a global safety issue. In Queensland (Qld), Australia, there is currently a focus on preventing the 'fatal five' behaviours underpinning road trauma (drug and drink driving, distraction, seat belt wearing, speeding, and fatigue), along with an emphasis on a shared responsibility for road safety that spans road users, vehicle manufacturers, designers, policy makers etc. The aim of this article is to clarify who shares the responsibility for road safety in Qld and to determine what control measures are enacted to prevent the fatal five behaviours. This is achieved through the presentation of a control structure model that depicts the actors and organisations within the Qld road transport system along with the control and feedback relationships that exist between them. Validated through a Delphi study, the model shows a diverse set of actors and organisations who share the responsibility for road safety that goes beyond those discussed in road safety policies and strategies. The analysis also shows that, compared to other safety critical domains, there are less formal control structures in road transport and that opportunities exist to add new controls and strengthen existing ones. Relationships that influence rather than control are also prominent. Finally, when compared to other safety critical domains, the strength of road safety controls is brought into question. Copyright © 2016 Elsevier Ltd. All rights reserved.

Trismus: An unusual presentation following road accident

Directory of Open Access Journals (Sweden)

Thakur Jagdeep

2007-01-01

Full Text Available Trismus due to trauma usually follows road accidents leading to massive faciomaxillary injury. In the literature there is no report of a foreign body causing trismus following a road accident, this rare case is an exception. We present a case of isolated presentation of trismus following a road accident. This case report stresses on the thorough evaluation of patients presenting with trismus following a road accident.

Erosion and sediment delivery following removal of forest roads

Science.gov (United States)

Madej, Mary Ann

2001-01-01

Erosion control treatments were applied to abandoned logging roads in California, with the goal of reducing road-related sediment input to streams and restoring natural hydrologic patterns on the landscape. Treatment of stream crossings involved excavating culverts and associated road fill and reshaping streambanks. A variety of techniques were applied to road benches, which included decompacting the road surface, placing unstable road fill in more stable locations, and re-establishing natural surface drainage patterns. Following treatment and a 12-year recurrence-interval storm, some road reaches and excavated stream crossings showed evidence of mass movement failures, gullying, bank erosion and channel incision. Post-treatment erosion from excavated stream crossings was related to two variables: a surrogate for stream power (drainage area × channel gradient) and the volume of fill excavated from the channel. Post-treatment erosion on road reaches was related to four explanatory variables: method of treatment, hillslope position (upper, mid-slope or lower), date of treatment, and an interaction term (hillslope position × method of treatment). Sediment delivery from treated roads in upper, middle and lower hillslope positions was 10, 135 and 550 m3 of sediment per kilometre of treated roads, respectively. In contrast, inventories of almost 500 km of forest roads in adjacent catchments indicate that untreated roads produced 1500 to 4700 m3 of sediment per kilometre of road length. Erosion from 300 km of treated roads contributed less than 2 per cent of the total sediment load of Redwood Creek during the period 1978 to 1998. Although road removal treatments do not completely eliminate erosion associated with forest roads, they do substantially reduce sediment yields from abandoned logging roads.

Innovation as Road Safety Felicitator

Science.gov (United States)

Sahoo, S.; Mitra, A.; Kumar, J.; Sahoo, B.

2018-03-01

Transportation via Roads should only be used for safely commuting from one place to another. In 2015, when 1.5 Million people, across the Globe started out on a journey, it was meant to be their last. The Global Status Report on Road Safety, 2015, reflected this data from 180 countries as road traffic deaths, worldwide. In India, more than 1.37 Lakh[4] people were victims of road accidents in 2013 alone. That number is more than the number of Indians killed in all the wars put together. With these disturbing facts in mind, we found out some key ambiguities in the Indian Road Traffic Management systems like the non-adaptive nature to fluctuating traffic, pedestrians and motor vehicles not adhering to the traffic norms strictly, to name a few. Introduction of simple systems would greatly erase the effects of this silent epidemic and our Project aims to achieve the same. It would introduce a pair of Barricade systems to cautiously separate the pedestrians and motor vehicles to minimise road mishaps to the extent possible. Exceptional situations like that of an Ambulance or any emergency vehicles will be taken care off by the use of RFID tags to monitor the movement of the Barricades. The varied traffic scenario can be guided properly by using the ADS-B (Automatic Detection System-Broadcast) for monitoring traffic density according to the time and place.

Improving road safety: Experiences from the Netherlands

OpenAIRE

Hagenzieker, M.P.

2012-01-01

Dr. Hagenzieker's research and education activities focus on the road safety effects of the transport system, with particular interest in road user behaviour aspects. Her PhD-research was on the effects of rewards on road user behaviour.

[Effects of road construction on regional vegetation types].

Science.gov (United States)

Liu, Shi-Liang; Liu, Qi; Wang, Cong; Yang, Jue-Jie; Deng, Li

2013-05-01

As a regional artificial disturbance component, road exerts great effects on vegetation types, and plays a substantial role in defining vegetation distribution to a certain extent. Aiming at the tropical rainforest degradation and artificial forest expansion in Yunnan Province of Southwest China, this paper analyzed the effects of road network extension on regional vegetation types. In the Province, different classes of roads had different effects on the vegetation types, but no obvious regularity was observed in the effects on the patch areas of different vegetation types due to the great variations of road length and affected distance. However, the vegetation patch number was more affected by lower class roads because of their wide distribution. As for different vegetation types, the vegetations on cultivated land were most affected by roads, followed by Castanopsis hystrix and Schima wallichii forests. Road network formation contributed most to the vegetation fragmentation, and there existed significant correlations between the human disturbance factors including village- and road distributions.

Value of monitoring in road network management

NARCIS (Netherlands)

Zouch, M.; Courage, W.; Napoles-Morales, O.

2014-01-01

We present a framework for road network management to assist road authorities in maintenance budget estimations and long-term maintenance strategies definition. Information about road conditions is obtained from monitoring. Available data are used to estimate and update prediction of degradation

road sector development and economic growth in ethiopia1

African Journals Online (AJOL)

Eyerusalem

Regarding community roads, both the management and accountancy .... previous years and its impact on overall and sectoral economic growth. Descriptive analysis is deployed to capture the link between the road transport sector and performance indicators, like rural accessibility, road density, road network, road financing ...

Birds and Roads: Reduced Transit for Smaller Species over Roads within an Urban Environment

Directory of Open Access Journals (Sweden)

Christopher D. Johnson

2017-05-01

Full Text Available Roads provide humans with a means of mobility between destinations, be it for transportation of goods and services or as a means of connecting with others. However, roads are also known to contribute toward a number of deleterious landscape processes, such as habitat destruction and fragmentation, pollution (e.g., chemical, noise and light and animal mortality. Few studies however have investigated their effects on avifauna. We investigated the influence of road width on movements of nearby bird assemblages in Australia by comparing crossing counts of four species guilds and sizes over roads of varying widths in Southern Brisbane. In addition, we also sought to determine the association of seasonality with species crossing richness and abundance. Species guild affiliations were based on definitions from previous literature: small forest dependent, large forest dependent, honeyeater, and urban tolerant; whereas body size classifications were arbitrarily defined: small (< 20 cm, medium (20–29 cm, and large (>30 cm. Road sites were selected based on their vegetation likeness, both within and between sites, and this was assessed using the Specht classification system. We detected strong, negative correlations between road width and forest species richness, crossing species richness and species crossing abundance. In particular, analysis of species guild classifications revealed species richness and crossing likelihoods of the small forest dependent guild to be consistently lower than those of large forest dependent, honeyeater and urban tolerant guilds. Analysis of species by body size classification yielded similar outcomes: small birds were consistently less likely to be present nearby and cross over roads of all widths compared to medium and large birds. We believe gap permeability, particularly changes in vegetation structure and complexity that may restrict a species ability to access to the gap, as well as competition and predation, play an

Climate Projection Data base for Roads - CliPDaR: Design a guideline for a transnational database of downscaled climate projection data for road impact models - within the Conference's of European Directors of Roads (CEDR) TRANSNATIONAL ROAD RESEARCH PROG

Science.gov (United States)

Matulla, Christoph; Namyslo, Joachim; Fuchs, Tobias; Türk, Konrad

2013-04-01

The European road sector is vulnerable to extreme weather phenomena, which can cause large socio-economic losses. Almost every year there occur several weather triggered events (like heavy precipitation, floods, landslides, high winds, snow and ice, heat or cold waves, etc.), that disrupt transportation, knock out power lines, cut off populated regions from the outside and so on. So, in order to avoid imbalances in the supply of vital goods to people as well as to prevent negative impacts on health and life of people travelling by car it is essential to know present and future threats to roads. Climate change might increase future threats to roads. CliPDaR focuses on parts of the European road network and contributes, based on the current body of knowledge, to the establishment of guidelines helping to decide which methods and scenarios to apply for the estimation of future climate change based challenges in the field of road maintenance. Based on regional scale climate change projections specific road-impact models are applied in order to support protection measures. In recent years, it has been recognised that it is essential to assess the uncertainty and reliability of given climate projections by using ensemble approaches and downscaling methods. A huge amount of scientific work has been done to evaluate these approaches with regard to reliability and usefulness for investigations on possible impacts of climate changes. CliPDaR is going to collect the existing approaches and methodologies in European countries, discuss their differences and - in close cooperation with the road owners - develops a common line on future applications of climate projection data to road impact models. As such, the project will focus on reviewing and assessing existing regional climate change projections regarding transnational highway transport needs. The final project report will include recommendations how the findings of CliPDaR may support the decision processes of European

Geotechnical Monitoring of the Automobile Road

Science.gov (United States)

Matsiy, Vladimir

2017-12-01

In the present article, the results of geotechnical monitoring of A-147 automobile road “Dzhubga-Sochi” are given. Some sections of the automobile road suffered from the landslide adjustment movements; it resulted in many deformations of the retaining structures, the damages of the roadbed and ground crawling over the retaining walls. The observation data made it possible to specify the borders of the active landslide and to form a forecast of the landslide activity in the sections of the automobile roads. Due to monitoring being carried out, there was substantiated the necessity to correct the service forms and records connected with the automobile road reconstruction.

Roads Belong in the Urban Landscape

DEFF Research Database (Denmark)

Clemmensen, Thomas Juel

2013-01-01

Roads are often associated with a fragmentation or splintering of landscapes and their natural connectivity; particularly in relation to ‘green infrastructure’ they are often considered problematic elements that rupture and barricade. Conversely, as part of larger networks, roads can be considered...... important elements in the creation of new, ‘green infrastructures’ that can qualify urban landscapes in terms of improving their overall porosity and connectivity. This argument will be unfolded and substantiated in this article through theoretical reflections which conceptually re-locate road networks...... in the urban landscape, supported by relevant reference projects that illustrate the potential of road networks as a platform for ‘green infrastructure’....

Why Did the Snake Cross the Road? Effects of Roads on Movement and Location of Mates by Garter Snakes (Thamnophis sirtalis parietalis

Directory of Open Access Journals (Sweden)

Richard Shine

2004-06-01

Full Text Available If animals avoid road surfaces or are unable to follow conspecific trails across such surfaces, previously continuous populations may be fragmented. We gathered data on the effects of a small (4-m wide gravel road on the behavior and trail-following abilities of garter snakes (Thamnophis sirtalis parietalis in Manitoba, central Canada. As expected, the road surface had less vegetation cover, a more open canopy and, thus, higher incident radiation than did the surrounding grassland. Contrary to expectations, however, substrate temperatures were lower on the road than in its surrounds, because of the higher reflectivity of the road's surface. On a nearby asphalt road, substrate temperatures were relatively high on the road surface only in the evening, as surrounding areas cooled. Focal sampling showed that snakes avoided the gravel road, typically changing direction when they encountered it. If they crossed the road, they did so by the shortest possible route (straight across. Mate-searching male snakes were less able to follow substrate-deposited pheromonal trails left by females if those trails crossed a road than if the trails were entirely within the surrounding grassland. Thus, roads may significantly modify snake movement patterns, as well as the ability of males to locate reproductive females. Our study provides the first detailed information on the effects of roads on snake behavior.

Functional classification of the Gauteng provincial road network ...

African Journals Online (AJOL)

The built environment consists of various land uses and activities connected by a road network. The efficiency and effectiveness of the road network directly impacts economic growth and societal movement. This study involved the functional classification of the Gauteng provincial road network using the South African Road ...

Problematics of Reliability of Road Rollers

Science.gov (United States)

Stawowiak, Michał; Kuczaj, Mariusz

2018-06-01

This article refers to the reliability of road rollers used in a selected roadworks company. Information on the method of road rollers service and how the service affects the reliability of these rollers is presented. Attention was paid to the process of the implemented maintenance plan with regard to the machine's operational time. The reliability of road rollers was analyzed by determining and interpreting readiness coefficients.

36 CFR 212.5 - Road system management.

Science.gov (United States)

2010-07-01

... construction, reconstruction, decommissioning, and maintenance. (2) Identification of unneeded roads... share of the costs. (d) Maintenance and reconstruction of National Forest System roads by users—(1... to cover maintenance or reconstruction of roads shall be used for the purposes deposited, except that...

Introducing Dual Suspension System in Road Vehicles

OpenAIRE

Imtiaz Hussain; Jawaid Daudpoto; Ali Asghar Memon

2013-01-01

The main objective of suspension system is to reduce the motions of the vehicle body with respect to road disturbances. The conventional suspension systems in road vehicles use passive elements such as springs and dampers to suppress the vibrations induced by the irregularities in the road. But these conventional suspension systems can suppress vibrations to a certain limit. This paper presents a novel idea to improve the ride quality of roads vehicles without compromising vehicle?s stability...

Salt on roads and the environment (VB)

DEFF Research Database (Denmark)

Hessberg, Philipp von; Jørgensen, Michael Søgaard

2000-01-01

This report descripes the extent of use of salt on roads in Denmark and the environmental consequences of this. Alternative strategies for reducing the risk of greasy roads and different ways of alleviating the vegetation are also discussed.The different consequences for the environment...... that this report discusses are:- The ground water.- Lakes and streams.- Plants and trees along roads.The consequences for the economy through usage of salt on roads has not been carried out....

Road crossing behavior under traffic light conflict: Modulating effects of green light duration and signal congruency.

Science.gov (United States)

Lange, Florian; Haiduk, Michael; Boos, Moritz; Tinschert, Peter; Schwarze, Anke; Eggert, Frank

2016-10-01

A large number of pedestrians and cyclists regularly ignore the traffic lights to cross the road illegally. In a recent analysis, illegal road crossing behavior has been shown to be enhanced in the presence of incongruent stimulus configurations. Pedestrians and cyclists are more likely to cross against a red light when exposed to an irrelevant conflicting green light. Here, we present experimental and observational data on the factors moderating the risk associated with incongruent traffic lights. In an observational study, we demonstrated that the conflict-related increase in illegal crossing rates is reduced when pedestrian and cyclist green light periods are long. In a laboratory experiment, we manipulated the color of the irrelevant signals to expose participants to different degrees of incongruency. Results revealed that individuals' performance gradually varied as a function of incongruency, suggesting that the negative impact of a conflicting green light can be reduced by slightly adjusting its color. Our findings highlight that the observation of real-world behavior at intersections and the experimental analysis of psychological processes under controlled laboratory conditions can complement each other in identifying risk factors of risky road crossing behavior. Based on this combination, our study elaborates on promising measures to improve safety at signalized intersections. Copyright © 2016 Elsevier Ltd. All rights reserved.

The study of technological prevention method of road accident ...

African Journals Online (AJOL)

The study of technological prevention method of road accident related to driver and vehicle. ... road accident prevention method based on the factors studied. The study of this paper can provide forceful data analysis support for the road traffic safety related research. Keywords: road accident; accident prevention; road safety.

Fusion of Pixel-based and Object-based Features for Road Centerline Extraction from High-resolution Satellite Imagery

Directory of Open Access Journals (Sweden)

CAO Yungang

2016-10-01

Full Text Available A novel approach for road centerline extraction from high spatial resolution satellite imagery is proposed by fusing both pixel-based and object-based features. Firstly, texture and shape features are extracted at the pixel level, and spectral features are extracted at the object level based on multi-scale image segmentation maps. Then, extracted multiple features are utilized in the fusion framework of Dempster-Shafer evidence theory to roughly identify the road network regions. Finally, an automatic noise removing algorithm combined with the tensor voting strategy is presented to accurately extract the road centerline. Experimental results using high-resolution satellite imageries with different scenes and spatial resolutions showed that the proposed approach compared favorably with the traditional methods, particularly in the aspect of eliminating the salt noise and conglutination phenomenon.

The scaling structure of the global road network.

Science.gov (United States)

Strano, Emanuele; Giometto, Andrea; Shai, Saray; Bertuzzo, Enrico; Mucha, Peter J; Rinaldo, Andrea

2017-10-01

Because of increasing global urbanization and its immediate consequences, including changes in patterns of food demand, circulation and land use, the next century will witness a major increase in the extent of paved roads built worldwide. To model the effects of this increase, it is crucial to understand whether possible self-organized patterns are inherent in the global road network structure. Here, we use the largest updated database comprising all major roads on the Earth, together with global urban and cropland inventories, to suggest that road length distributions within croplands are indistinguishable from urban ones, once rescaled to account for the difference in mean road length. Such similarity extends to road length distributions within urban or agricultural domains of a given area. We find two distinct regimes for the scaling of the mean road length with the associated area, holding in general at small and at large values of the latter. In suitably large urban and cropland domains, we find that mean and total road lengths increase linearly with their domain area, differently from earlier suggestions. Scaling regimes suggest that simple and universal mechanisms regulate urban and cropland road expansion at the global scale. As such, our findings bear implications for global road infrastructure growth based on land-use change and for planning policies sustaining urban expansions.

Dust emissions from unpaved roads on the Colorado Plateau

Science.gov (United States)

Duniway, M.; Flagg, C.; Belnap, J.

2013-12-01

On the Colorado Plateau, elevated levels of aeolian dust have become a major land management and policy concern due to its influence on climate, weather, terrestrial ecosystem dynamics, landscape development and fertility, melting of snow and ice, air quality, and human health. Most desert soil surfaces are stabilized by plants, rocks, and/or physical or biological soil crusts, but once disturbed, sediment production from these surfaces can increase dramatically. Road development and use is a common surface disturbing activity in the region. The extent and density of roads and road networks is rapidly increasing due to continued energy exploration, infrastructure development, and off-highway recreation activities. Though it is well known that unpaved roads produce dust, the relative contribution of dust from existing roads or the implications of future road development to regional dust loading is unknown. To address this need, we have initiated a multifaceted research effort to evaluating dust emissions from unpaved roads regionally. At 34 sites arranged across various road surfaces and soil textures in southeastern Utah, we are: 1) monitoring dust emissions, local wind conditions, and vehicle traffic and 2) evaluating fugitive dust potential using a portable wind tunnel and measuring road characteristics that affect dust production. We will then 3) develop a GIS-based model that integrates results from 1 & 2 to estimate potential dust contributions from current and future scenarios of regional road development. Passive, horizontal sediment traps were installed at three distances downwind from the road edge. One control trap was placed upwind of the samplers to account for local, non-road dust emissions. An electronic vehicle counter and anemometer were also installed at monitoring sites. Dust samples were collected every three months at fixed heights, 15 cm up to 100 cm above the soil surface, from March 2010 to the present. Threshold friction velocities (TFV

Lane Departure System Design using with IR Camera for Night-time Road Conditions

Directory of Open Access Journals (Sweden)

Osman Onur Akırmak

2015-02-01

Full Text Available Today, one of the largest areas of research and development in the automobile industry is road safety. Many deaths and injuries occur every year on public roads from accidents caused by sleepy drivers, that technology could have been used to prevent. Lane detection at night-time is an important issue in driving assistance systems. This paper deals with vision-based lane detection and tracking at night-time. This project consists of a research and development of an algorithm for automotive systems to detect the departure of vehicle from out of lane. Once the situation is detected, a warning is issued to the driver with sound and visual message through “Head Up Display” (HUD system. The lane departure is detected through the images obtained from a single IR camera, which identifies the departure at a satisfactory accuracy via improved quality of video stream. Our experimental results and accuracy evaluation show that our algorithm has good precision and our detecting method is suitable for night-time road conditions.

Road safety policy of the European Union.

NARCIS (Netherlands)

2013-01-01

The European Union (EU) is important for national road safety policies. The EU has several policymaking instruments, such as binding regulations and directives, and non-binding recommendations. An important element in the EU policy plans on road safety are the non-binding European road safety

A Distributed Approach to Continuous Monitoring of Constrained k-Nearest Neighbor Queries in Road Networks

Directory of Open Access Journals (Sweden)

Hyung-Ju Cho

2012-01-01

Full Text Available Given two positive parameters k and r, a constrained k-nearest neighbor (CkNN query returns the k closest objects within a network distance r of the query location in road networks. In terms of the scalability of monitoring these CkNN queries, existing solutions based on central processing at a server suffer from a sudden and sharp rise in server load as well as messaging cost as the number of queries increases. In this paper, we propose a distributed and scalable scheme called DAEMON for the continuous monitoring of CkNN queries in road networks. Our query processing is distributed among clients (query objects and server. Specifically, the server evaluates CkNN queries issued at intersections of road segments, retrieves the objects on the road segments between neighboring intersections, and sends responses to the query objects. Finally, each client makes its own query result using this server response. As a result, our distributed scheme achieves close-to-optimal communication costs and scales well to large numbers of monitoring queries. Exhaustive experimental results demonstrate that our scheme substantially outperforms its competitor in terms of query processing time and messaging cost.

Road Short-Term Travel Time Prediction Method Based on Flow Spatial Distribution and the Relations

Directory of Open Access Journals (Sweden)

Mingjun Deng

2016-01-01

Full Text Available There are many short-term road travel time forecasting studies based on time series, but indeed, road travel time not only relies on the historical travel time series, but also depends on the road and its adjacent sections history flow. However, few studies have considered that. This paper is based on the correlation of flow spatial distribution and the road travel time series, applying nearest neighbor and nonparametric regression method to build a forecasting model. In aspect of spatial nearest neighbor search, three different space distances are defined. In addition, two forecasting functions are introduced: one combines the forecasting value by mean weight and the other uses the reciprocal of nearest neighbors distance as combined weight. Three different distances are applied in nearest neighbor search, which apply to the two forecasting functions. For travel time series, the nearest neighbor and nonparametric regression are applied too. Then minimizing forecast error variance is utilized as an objective to establish the combination model. The empirical results show that the combination model can improve the forecast performance obviously. Besides, the experimental results of the evaluation for the computational complexity show that the proposed method can satisfy the real-time requirement.

Road lighting fundamentals, technology and application

CERN Document Server

van Bommel, Wout

2015-01-01

This book outlines the underlying principles on which modern road lighting is based, and provides the reader with knowledge of how these principles should be applied in practice. It offers a completely fresh approach to the subject, reflecting how the technology of road lighting has progressed to keep up with the changes in lamp technology, especially in solid state light sources, and the increasing awareness of energy use and environmental issues. The book is divided into three parts. Part One describes lighting of open roads, with chapters discussing visual performance and comfort (including the effects of mesopic vision and age), and international standards and recommendations for road lighting. Lighting equipment is introduced; specifically lamps and luminaires in terms of their practical properties and features, but also the road surface and its characteristics. A chapter on Lighting Design makes the link between theory and practice, providing the reader with the knowledge needed for effective lighting d...

Road traffic noise and children's inattention.

Science.gov (United States)

Weyde, Kjell Vegard; Krog, Norun Hjertager; Oftedal, Bente; Magnus, Per; Øverland, Simon; Stansfeld, Stephen; Nieuwenhuijsen, Mark J; Vrijheid, Martine; de Castro Pascual, Montserrat; Aasvang, Gunn Marit

2017-11-21

An increasing number of children are exposed to road traffic noise levels that may lead to adverse effects on health and daily functioning. Childhood is a period of intense growth and brain maturation, and children may therefore be especially vulnerable to road traffic noise. The objective of the present study was to examine whether road traffic noise was associated with reported inattention symptoms in children, and whether this association was mediated by sleep duration. This study was based on the Norwegian Mother and Child Cohort Study conducted by the Norwegian Institute of Public Health. Parental reports of children's inattention at age 8 were linked to modelled levels of residential road traffic noise. We investigated the association between inattention and noise exposure during pregnancy (n = 1934), noise exposure averaged over 5 years (age 3 to 8 years; n = 1384) and noise exposure at age 8 years (n = 1384), using fractional logit response models. The participants were children from Oslo, Norway. An association with inattention at age 8 years was found for road traffic noise exposure at age 8 years (coef = .0083, CI = [.0012, .0154]; 1.2% point increase in inattention score per 10 dB increase in noise level), road traffic noise exposure average for the last 5 years (coef = .0090, CI = [.0016, .0164]; 1.3% point increase/10 dB), and for pregnancy road traffic noise exposure for boys (coef = .0091, CI = [.0010, .0171]), but not girls (coef = -.0021, CI = [-.0094, .0053]). Criteria for doing mediation analyses were not fulfilled. Results indicate that road traffic noise has a negative impact on children's inattention. We found no mediation by sleep duration.

Road safety in developing countries.

NARCIS (Netherlands)

Schreuder, D.A.

1991-01-01

This paper presents a classification of countries (developing and developed alike), divided into two main categories: an economical and historical entry. When road safety problems are placed into the economical context, it then appears that, among other things: (1) The road safety problem in the

5 CFR 930.107 - Waiver of road test.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Waiver of road test. 930.107 Section 930....107 Waiver of road test. Under the following conditions, OPM or an agency head or his or her designated representative may waive the road test: (a) OPM waives the road test requirement for operators of...

Guidelines for upgrading of low volume roads

CSIR Research Space (South Africa)

Division of Roads

1993-03-01

Full Text Available The purpose of this manual is to provide guidelines on the upgrading of gravel low volume roads to roads and maintenance personnel of road authorities of all sizes. Low volume is, for the purpose of this document, defined to be less than 500...

Suspension system vibration analysis with regard to variable type ability to smooth road irregularities

Science.gov (United States)

Rykov, S. P.; Rykova, O. A.; Koval, V. S.; Makhno, D. E.; Fedotov, K. V.

2018-03-01

The paper aims to analyze vibrations of the dynamic system equivalent of the suspension system with regard to tyre ability to smooth road irregularities. The research is based on static dynamics for linear systems of automated control, methods of correlation, spectral and numerical analysis. Input of new data on the smoothing effect of the pneumatic tyre reflecting changes of a contact area between the wheel and road under vibrations of the suspension makes the system non-linear which requires using numerical analysis methods. Taking into account the variable smoothing ability of the tyre when calculating suspension vibrations, one can approximate calculation and experimental results and improve the constant smoothing ability of the tyre.

Traffic mortality and the role of minor roads.

Science.gov (United States)

van Langevelde, Frank; van Dooremalen, Coby; Jaarsma, Catharinus F

2009-01-01

Roads have large impacts on wildlife, as they form one of the principal causes of mortality, and disturbance and fragmentation of habitat. These impacts are mainly studied and mitigated on major roads. It is, however, a widespread misconception that most animals are killed on major roads. In this paper, we argue that minor roads have a larger impact on wildlife with respect to habitat destruction, noise load and traffic mortality. We use data on traffic related deaths in badgers (Meles meles) in The Netherlands to illustrate that traffic mortality is higher on minor roads. We ask for a more extensive investigation of the environmental impacts of minor roads. Moreover, we argue that the success of mitigation on roads drastically increases when both major and minor roads are integrated in the planning of traffic flows. Therefore, we propose a strategy based on the concept of a "traffic-calmed area". Traffic-calmed areas create opportunities for wildlife by decreasing limitations for animal movement. We ask for further studies to estimate what size traffic-calmed areas should be to maintain minimum viable animal populations.

Extended investigation on road fatality in Brunei.

Science.gov (United States)

Yusof, N B; Hoque, M A; Steele, M C; Yong, S Y

2018-06-08

Road fatality is one of the leading causes of death in Brunei with 79 deaths in 1993, the highest ever recorded. The Brunei government has been trying to reduce this by implementing new traffic measures and successfully reduced fatalities to 24 fatalities in 2014. Yearly road fatality has been fluctuating, but there has been a declining tendency overall. The aim of this study is to investigate road fatality in Brunei by extending the research. We developed a multiple regression model and carried out an analysis on road fatality in Brunei. Our analysis indicates that the road fatality appears to rise depending on the increase in the number of young drivers between 15 to 24 years and the number of unemployed people. Comparisons of Brunei road fatality rate per 10,000 vehicles are made with some other countries and we conclude that Brunei has approximately the same rate as Australia in 2014.

Road dust from pavement wear and traction sanding

Energy Technology Data Exchange (ETDEWEB)

Kupiainen, K.

2007-07-01

Vehicles affect the concentrations of ambient airborne particles through exhaust emissions, but particles are also formed in the mechanical processes in the tire-road interface, brakes, and engine. Particles deposited on or in the vicinity of the road may be re-entrained, or resuspended, into air through vehicle-induced turbulence and shearing stress of the tires. A commonly used term for these particles is 'road dust'. The processes affecting road dust emissions are complex and currently not well known. Road dust has been acknowledged as a dominant source of PM10 especially during spring in the sub-arctic urban areas, e.g. in Scandinavia, Finland, North America and Japan. The high proportion of road dust in sub-arctic regions of the world has been linked to the snowy winter conditions that make it necessary to use traction control methods. Traction control methods include dispersion of traction sand, melting of ice with brine solutions, and equipping the tires with either metal studs (studded winter tires), snow chains, or special tire design (friction tires). Several of these methods enhance the formation of mineral particles from pavement wear and/or from traction sand that accumulate in the road environment during winter. When snow and ice melt and surfaces dry out, traffic-induced turbulence makes some of the particles airborne. A general aim of this study was to study processes and factors underlying and affecting the formation and emissions of road dust from paved road surfaces. Special emphasis was placed on studying particle formation and sources during tire road interaction, especially when different applications of traction control, namely traction sanding and/or winter tires were in use. Respirable particles with aerodynamic diameter below 10 micrometers (PM10) have been the main concern, but other size ranges and particle size distributions were also studied. The following specific research questions were addressed: (i) How do traction

Large roads reduce bat activity across multiple species.

Science.gov (United States)

Kitzes, Justin; Merenlender, Adina

2014-01-01

Although the negative impacts of roads on many terrestrial vertebrate and bird populations are well documented, there have been few studies of the road ecology of bats. To examine the effects of large roads on bat populations, we used acoustic recorders to survey bat activity along ten 300 m transects bordering three large highways in northern California, applying a newly developed statistical classifier to identify recorded calls to the species level. Nightly counts of bat passes were analyzed with generalized linear mixed models to determine the relationship between bat activity and distance from a road. Total bat activity recorded at points adjacent to roads was found to be approximately one-half the level observed at 300 m. Statistically significant road effects were also found for the Brazilian free-tailed bat (Tadarida brasiliensis), big brown bat (Eptesicus fuscus), hoary bat (Lasiurus cinereus), and silver-haired bat (Lasionycteris noctivagans). The road effect was found to be temperature dependent, with hot days both increasing total activity at night and reducing the difference between activity levels near and far from roads. These results suggest that the environmental impacts of road construction may include degradation of bat habitat and that mitigation activities for this habitat loss may be necessary to protect bat populations.

Role of urban surface roughness in road-deposited sediment build-up and wash-off

Science.gov (United States)

Zhao, Hongtao; Jiang, Qian; Xie, Wenxia; Li, Xuyong; Yin, Chengqing

2018-05-01

Urban road surface roughness is one of the most important factors in estimation of surface runoff loads caused by road-deposited sediment (RDS) wash-off and design of its control measures. However, because of a lack of experimental data to distinguish the role of surface roughness, the effects of surface roughness on RDS accumulation and release are not clear. In this study, paired asphalt and concrete road surfaces and rainfall simulation designs were used to distinguish the role of surface roughness in RDS build-up and wash-off. Our results showed that typical asphalt surfaces often have higher depression depths than typical concrete surfaces, indicating that asphalt surfaces are relatively rougher than concrete surface. Asphalt surfaces can retain a larger RDS amount, relative higher percentage of coarser particles, larger RDS wash-off loads, and lower wash-off percentage, than concrete surfaces. Surface roughness has different effects in RDS motilities with different particle sizes during rainfall runoff, and the settleable particles (44-149 μm) were notably influenced by it. Furthermore, the first flush phenomenon tended to be greater on relatively smooth surfaces than relatively rough surfaces. Overall, surface roughness plays an important role in influencing the complete process of RDS build-up and wash-off on different road characteristics.

An Energy-Efficient Cluster-Based Vehicle Detection on Road Network Using Intention Numeration Method

Directory of Open Access Journals (Sweden)

Deepa Devasenapathy

2015-01-01

Full Text Available The traffic in the road network is progressively increasing at a greater extent. Good knowledge of network traffic can minimize congestions using information pertaining to road network obtained with the aid of communal callers, pavement detectors, and so on. Using these methods, low featured information is generated with respect to the user in the road network. Although the existing schemes obtain urban traffic information, they fail to calculate the energy drain rate of nodes and to locate equilibrium between the overhead and quality of the routing protocol that renders a great challenge. Thus, an energy-efficient cluster-based vehicle detection in road network using the intention numeration method (CVDRN-IN is developed. Initially, sensor nodes that detect a vehicle are grouped into separate clusters. Further, we approximate the strength of the node drain rate for a cluster using polynomial regression function. In addition, the total node energy is estimated by taking the integral over the area. Finally, enhanced data aggregation is performed to reduce the amount of data transmission using digital signature tree. The experimental performance is evaluated with Dodgers loop sensor data set from UCI repository and the performance evaluation outperforms existing work on energy consumption, clustering efficiency, and node drain rate.

An energy-efficient cluster-based vehicle detection on road network using intention numeration method.

Science.gov (United States)

Devasenapathy, Deepa; Kannan, Kathiravan

2015-01-01

The traffic in the road network is progressively increasing at a greater extent. Good knowledge of network traffic can minimize congestions using information pertaining to road network obtained with the aid of communal callers, pavement detectors, and so on. Using these methods, low featured information is generated with respect to the user in the road network. Although the existing schemes obtain urban traffic information, they fail to calculate the energy drain rate of nodes and to locate equilibrium between the overhead and quality of the routing protocol that renders a great challenge. Thus, an energy-efficient cluster-based vehicle detection in road network using the intention numeration method (CVDRN-IN) is developed. Initially, sensor nodes that detect a vehicle are grouped into separate clusters. Further, we approximate the strength of the node drain rate for a cluster using polynomial regression function. In addition, the total node energy is estimated by taking the integral over the area. Finally, enhanced data aggregation is performed to reduce the amount of data transmission using digital signature tree. The experimental performance is evaluated with Dodgers loop sensor data set from UCI repository and the performance evaluation outperforms existing work on energy consumption, clustering efficiency, and node drain rate.

Roads at risk - the impact of debris flows on road network reliability and vulnerability in southern Norway

Science.gov (United States)

Meyer, Nele Kristin; Schwanghart, Wolfgang; Korup, Oliver

2014-05-01

Norwegian's road network is frequently affected by debris flows. Both damage repair and traffic interruption generate high economic losses and necessitate a rigorous assessment of where losses are expected to be high and where preventive measures should be focused on. In recent studies, we have developed susceptibility and trigger probability maps that serve as input into a hazard calculation at the scale of first-order watersheds. Here we combine these results with graph theory to assess the impact of debris flows on the road network of southern Norway. Susceptibility and trigger probability are aggregated for individual road sections to form a reliability index that relates to the failure probability of a link that connects two network vertices, e.g., road junctions. We define link vulnerability as a function of traffic volume and additional link failure distance. Additional link failure distance is the extra length of the alternative path connecting the two associated link vertices in case the network link fails and is calculated by a shortest-path algorithm. The product of network reliability and vulnerability indices represent the risk index. High risk indices identify critical links for the Norwegian road network and are investigated in more detail. Scenarios demonstrating the impact of single or multiple debris flow events are run for the most important routes between seven large cities in southern Norway. First results show that the reliability of the road network is lowest in the central and north-western part of the study area. Road network vulnerability is highest in the mountainous regions in central southern Norway where the road density is low and in the vicinity of cities where the traffic volume is large. The scenarios indicate that city connections that have their shortest path via routes crossing the central part of the study area have the highest risk of route failure.

The Use of Theatre Tours in Road Safety Education.

Science.gov (United States)

Powney, Janet; And Others

The Scottish Road Safety Campaign and the Road Safety Council of Wales have made a large investment in theater tours as a method of providing road safety education. This study aimed to evaluate the effectiveness of a road safety message delivered by a theater group, Road Safety Officers (RSOs), or, teachers for pupils in upper secondary classes.…

Network Screening for Smarter Road Sites: A Regional Case

Directory of Open Access Journals (Sweden)

Attila Grieco

2014-05-01

Full Text Available Road safety has been a main societal and policy issue in many European countries since the early years of last decade. After the 2000-2010 Road Safety Programme launched by the European Commission, in 2011 the Commission adopted the new 2020 programme, even more demanding than the previous. As the societal consequences of road casualties are increasingly perceived as a core dimension of smart mobility, road safety system is now facing new challenges. Current mobility shifts to softer and greener transportation means raise new safety concerns for an increasingly larger share of vulnerable road users. The need to integrate road safety requirements with other residential, mobility, and environmental policies calls for a more detailed understanding of the phenomenon at different spatial levels and with different observation lenses. The pilot study described in this paper is a contribution to this end. It aims at identifying the accident prone sites of the regional road network to help prioritizing safety interventions, by the regional administration having road planning responsibilities. The study develops a screening approach to select hazardous road locations, outside urban premises, from the Piedmont provincial and state roads. The most recent data for the 2010-2012 years were considered, drawn from the ISTAT road accident database, managed by the CMRSS. The procedure consists of the following steps: identification of the elementary road sections to be screened, through a GIS analysis; definition of the screening groups (road sections have been subdivided in 4 length classes; definition of the selection criteria, with two severity thresholds based on the crash density; classification of the elementary road sections by severity thresholds.

Residential proximity to major roads and term low birth weight: the roles of air pollution, heat, noise, and road-adjacent trees.

Science.gov (United States)

Dadvand, Payam; Ostro, Bart; Figueras, Francesc; Foraster, Maria; Basagaña, Xavier; Valentín, Antònia; Martinez, David; Beelen, Rob; Cirach, Marta; Hoek, Gerard; Jerrett, Michael; Brunekreef, Bert; Nieuwenhuijsen, Mark J

2014-07-01

Maternal residential proximity to roads has been associated with adverse pregnancy outcomes. However, there is no study investigating mediators or buffering effects of road-adjacent trees on this association. We investigated the association between mothers' residential proximity to major roads and term low birth weight (LBW), while exploring possible mediating roles of air pollution (PM(2.5), PM(2.5-10), PM(10), PM(2.5) absorbance, nitrogen dioxide, and nitrogen oxides), heat, and noise and buffering effect of road-adjacent trees on this association. This cohort study was based on 6438 singleton term births in Barcelona, Spain (2001-2005). Road proximity was measured as both continuous distance to and living within 200 m from a major road. We assessed individual exposures to air pollution, noise, and heat using, respectively, temporally adjusted land-use regression models, annual averages of 24-hour noise levels across 50 m and 250 m, and average of satellite-derived land-surface temperature in a 50-m buffer around each residential address. We used vegetation continuous fields to abstract tree coverage in a 200-m buffer around major roads. Living within 200 m of major roads was associated with a 46% increase in term LBW risk; an interquartile range increase in heat exposure with an 18% increase; and third-trimester exposure to PM(2.5), PM(2.5-10), and PM10 with 24%, 25%, and 26% increases, respectively. Air pollution and heat exposures together explained about one-third of the association between residential proximity to major roads and term LBW. Our observations on the buffering of this association by road-adjacent trees were not consistent between our 2 measures of proximity to major roads. An increased risk of term LBW associated with proximity to major roads was partly mediated by air pollution and heat exposures.

Prioritizing Road Treatments using the Geomorphic Roads Analysis and Inventory Package (GRAIP) to Improve Watershed Conditions in the Wall Creek Watershed, Oregon

Science.gov (United States)

Day, K. T.; Black, T.; Clifton, C.; Luce, C.; McCune, S.; Nelson, N.

2010-12-01

Wall Creek, tributary to the North Fork John Day River in eastern Oregon, was identified as a priority watershed by the Umatilla National Forest for restoration in 2002. Most streams in this 518 km2 multi-ownership watershed are designated critical habitat for threatened steelhead. Eight streams are listed on the Oregon 303(d) list for elevated temperatures and excess sedimentation. Over 1000 km of public and private roads in the watershed present a major source of potential water quality and habitat impairment. We conducted a watershed-wide inventory of roads using the Geomorphic Roads Analysis and Inventory Package (GRAIP) in 2009 to quantify sediment contributions from roads to streams. GRAIP is a field and GIS-based model developed by the Forest Service Rocky Mountain Research Station and Utah State University that georeferences and quantifies road hydrologic connectivity, sediment production and delivery, mass wasting, and risk of diversion and plugging at stream crossings. Field survey and modeling produced data for 6,473 drainage locations on 726 km of road (most of the publically owned roads) quantifying the location and mass of sediment produced and delivered to streams. Findings indicate a relatively small subset of roads deliver the majority of road-produced fine sediment; 12 percent of the road length delivers 90 percent of the total fine sediment to streams. Overall fine sediment production in the watershed is relatively low (with an estimated background erosion rate of 518,000 kg/yr for the watershed) and sediment produced and delivered from the road system appears to be a modest addition. Road surfaces produce approximately 81,455 kg of fine sediment per year, with 20,976 kg/year delivered to the stream network. Fifty-nine gullies were observed, 41 of which received road runoff. Sixteen road-related landslides were also observed. The excavated volume of these features totals 3,922,000 kg which is equivalent to 175 years of fine sediment delivery at

Road safety and trade and industry.

OpenAIRE

2014-01-01

Trade and industry mostly experience the negative consequences of crashes, but sometimes the consequences are positive. The negative consequences of road traffic crashes include loss of personnel and damage to vehicles. Some other industries, such as damage repair companies, on the other hand, derive income from road crashes. Trade and industry can also be of importance for road safety. Particularly the transport sector, the car industry and insurers take several initiatives which for example...

Self regulation initiative in heavy vehicle transport to address road safety, accelerated road deterioration and transport productivity in South Africa

CSIR Research Space (South Africa)

Nordengen, Paul A

2006-06-01

Full Text Available Heavy vehicle overloading and road safety continue to be major problems in South Africa notwithstanding efforts at more effective enforcement by the road and traffic authorities. Overloading causes premature road deterioration and, together...

Effects of roads on survival of San Clemente Island foxes

Science.gov (United States)

Snow, N.P.; Andelt, William F.; Stanley, T.R.; Resnik, J.R.; Munson, L.

2012-01-01

Roads generate a variety of influences on wildlife populations; however, little is known about the effects of roads on endemic wildlife on islands. Specifically, road-kills of island foxes (Urocyon littoralis) on San Clemente Island (SCI), Channel Islands, California, USA are a concern for resource managers. To determine the effects of roads on island foxes, we radiocollared foxes using a 3-tiered sampling design to represent the entire population in the study area, a sub-population near roads, and a sub-population away from roads on SCI. We examined annual survival rates using nest-survival models, causes of mortalities, and movements for each sample. We found the population had high annual survival (0.90), although survival declined with use of road habitat, particularly for intermediate-aged foxes. Foxes living near roads suffered lower annual survival (0.76), resulting from high frequencies of road-kills (7 of 11 mortalities). Foxes living away from roads had the highest annual survival (0.97). Road-kill was the most prominent cause of mortality detected on SCI, which we estimated as killing 3-8% of the population in the study area annually. Based on movements, we were unable to detect any responses by foxes that minimized their risks from roads. The probabilities of road-kills increased with use of the road habitat, volume of traffic, and decreasing road sinuosity. We recommend that managers should attempt to reduce road-kills by deterring or excluding foxes from entering roads, and attempting to modify behaviors of motorists to be vigilant for foxes. ?? 2011 The Wildlife Society.

Second-best Road Pricing through Highway Franchising

NARCIS (Netherlands)

Verhoef, E.T.

2007-01-01

This paper considers the welfare impacts of a range of franchising regimes for congestible highways. For a single road in isolation, it is shown that a competitive auction with the level of road use as the decision criterion produces the socially optimal road (in terms of capacity and toll level),

Quantification of Gravel Rural Road Sediment Production

Science.gov (United States)

Silliman, B. A.; Myers Toman, E.

2014-12-01

Unbound rural roads are thought to be one of the largest anthropogenic sources of sediment reaching stream channels in small watersheds. This sediment deposition can reduce water quality in the streams negatively impacting aquatic habitat as well as impacting municipal drinking water sources. These roads are thought to see an increase in construction and use in southeast Ohio due to the expansion of shale gas development in the region. This study set out to quantify the amount of sediment these rural roads are able to produce. A controlled rain event of 12.7 millimeters of rain over a half hour period was used to drive sediment production over a 0.03 kilometer section of gravel rural road. These 8 segments varied in many characteristics and produced from 2.0 to 8.4 kilograms of sediment per 0.03 kilometers of road with the average production over the 8 segments being 5.5 kilograms of sediment. Sediment production was not strongly correlated with road segment slope but traffic was found to increase sediment production from 1.1 to 3.9 times as much sediment after traffic use. These results will help inform watershed scale sediment budgeting, and inform best management practices for road maintenance and construction. This study also adds to the understanding of the impacts of rural road use and construction associated with the changing land use from agricultural to natural gas extraction.

Major Roads

Data.gov (United States)

Minnesota Department of Natural Resources — This data set contains roadway centerlines for major roads (interstates and trunk highways) found on the USGS 1:24,000 mapping series. These roadways are current...

Optimal policies for aggregate recycling from decommissioned forest roads.

Science.gov (United States)

Thompson, Matthew; Sessions, John

2008-08-01

To mitigate the adverse environmental impact of forest roads, especially degradation of endangered salmonid habitat, many public and private land managers in the western United States are actively decommissioning roads where practical and affordable. Road decommissioning is associated with reduced long-term environmental impact. When decommissioning a road, it may be possible to recover some aggregate (crushed rock) from the road surface. Aggregate is used on many low volume forest roads to reduce wheel stresses transferred to the subgrade, reduce erosion, reduce maintenance costs, and improve driver comfort. Previous studies have demonstrated the potential for aggregate to be recovered and used elsewhere on the road network, at a reduced cost compared to purchasing aggregate from a quarry. This article investigates the potential for aggregate recycling to provide an economic incentive to decommission additional roads by reducing transport distance and aggregate procurement costs for other actively used roads. Decommissioning additional roads may, in turn, result in improved aquatic habitat. We present real-world examples of aggregate recycling and discuss the advantages of doing so. Further, we present mixed integer formulations to determine optimal levels of aggregate recycling under economic and environmental objectives. Tested on an example road network, incorporation of aggregate recycling demonstrates substantial cost-savings relative to a baseline scenario without recycling, increasing the likelihood of road decommissioning and reduced habitat degradation. We find that aggregate recycling can result in up to 24% in cost savings (economic objective) and up to 890% in additional length of roads decommissioned (environmental objective).

Small-scale geodiversity and dirt road management, Ede (NL)

Science.gov (United States)

van den Ancker, Hanneke; Jungerius, Pieter Dirk

2016-04-01

A large part of the countryside roads on the Pleistocene sands of The Netherlands are dirt roads. Most are footpaths, but a small percentage are relatively heavily used by motorized vehicles. These latter roads are a cause subject of debate. Puddles and potholes develop during periods of wet weather, while dust whirls from the roads form during spells of dry weather as do washboard ripples. They cause problems for people living along these roads and tourists (walkers and bikers. The community of Ede (NL), like many other communities on the sand, wants to keep its 80 km of dirt roads because of the natural values they harbour as well as for their characteristic landscape quality and cultural heritage value. A part of the dirt roads in Ede is heavily used. In 2009, the community of Ede developed a decision model to support management of the dirt roads. Ede acknowledges that each dirt road is unique and asks for a tailor-made solution. Road maintenance measures include grading, making a camber, digging pits, applying loam or sandy loam. If problems become too large, one-way traffic can be an option. In more and more cases the dirt roads are barred for motorized through traffic (Gemeente Ede, 2009). As a reconnaissance we have studied the dirt roads of the Horabos/Horalaan over the last year. Incidentally we looked at other parts of the main Horalaan and the footpaths in the adjacent forest of Hoekelum. All dirt roads lie near the top of a Saalian push-moraine in which the upper course of dry valleys are present. Some results of the reconnaissance: - Most dirt roads sections in the Horabos lie lower than the surrounding terrain; - The problems develop in a short period of time during special weather conditions; - Certain dirt road sections e.g. those sections crossing a slight depression are quickly developing potholes; - Even a small slope of the road (differences that have consequences for its maintenance. Knowledge of geodiversity of the terrain and study of small

New optimization strategies of pavement maintenance: A case study for national road network in Indonesia using integrated road management system

Science.gov (United States)

Hamdi, Hadiwardoyo, Sigit P.; Correia, A. Gomes; Pereira, Paulo

2017-06-01

A road network requires timely maintenance to keep the road surface in good condition onward better services to improve accessibility and mobility. Strategies and maintenance techniques must be chosen in order to maximize road service level through cost-effective interventions. This approach requires an updated database, which the road network in Indonesia is supported by a manual and visual survey, also using NAASRA profiler. Furthermore, in this paper, the deterministic model of deterioration was used. This optimization model uses life cycle cost analysis (LCCA), applied in an integrated manner, using IRI indicator, and allows determining the priority of treatment, type of treatment and its relation to the cost. The purpose of this paper was focussed on the aspects of road maintenance management, i.e., maintenance optimization models for different levels of traffic and various initial of road distress conditions on the national road network in Indonesia. The implementation of Integrated Road Management System (IRMS) can provide a solution to the problem of cost constraints in the maintenance of the national road network. The results from this study found that as the lowest as agency cost, it will affect the increasing of user cost. With the achievement of the target plan scenario Pl000 with initial value IRI 2, it was found that the routine management throughout the year and in early reconstruction and periodic maintenance with a 30 mm thick overlay, will simultaneously provide a higher net benefit value and has the lowest total cost of transportation.

Evaluation of Shortest Paths in Road Network

Directory of Open Access Journals (Sweden)

Farrukh Shehzad

2009-06-01

Full Text Available Optimization is a key factor in almost all the topics of operations research / management science and economics.The road networks can be optimized within different constraints like time, distance, cost and traffic running onthe roads.This study is based on optimization of real road network by means of distances. Two main objectives arepursued in this research: 1 road distances among different routes are composed in detail; 2 two standardalgorithms (Dijkstra and Floyd-Warshall algoritms are applied to optimize/minimize these distances for bothsingle-source and all-pairs shortest path problems.

Amphibian and reptile road-kills on tertiary roads in relation to landscape structure: using a citizen science approach with open-access land cover data.

Science.gov (United States)

Heigl, Florian; Horvath, Kathrin; Laaha, Gregor; Zaller, Johann G

2017-06-26

Amphibians and reptiles are among the most endangered vertebrate species worldwide. However, little is known how they are affected by road-kills on tertiary roads and whether the surrounding landscape structure can explain road-kill patterns. The aim of our study was to examine the applicability of open-access remote sensing data for a large-scale citizen science approach to describe spatial patterns of road-killed amphibians and reptiles on tertiary roads. Using a citizen science app we monitored road-kills of amphibians and reptiles along 97.5 km of tertiary roads covering agricultural, municipal and interurban roads as well as cycling paths in eastern Austria over two seasons. Surrounding landscape was assessed using open access land cover classes for the region (Coordination of Information on the Environment, CORINE). Hotspot analysis was performed using kernel density estimation (KDE+). Relations between land cover classes and amphibian and reptile road-kills were analysed with conditional probabilities and general linear models (GLM). We also estimated the potential cost-efficiency of a large scale citizen science monitoring project. We recorded 180 amphibian and 72 reptile road-kills comprising eight species mainly occurring on agricultural roads. KDE+ analyses revealed a significant clustering of road-killed amphibians and reptiles, which is an important information for authorities aiming to mitigate road-kills. Overall, hotspots of amphibian and reptile road-kills were next to the land cover classes arable land, suburban areas and vineyards. Conditional probabilities and GLMs identified road-kills especially next to preferred habitats of green toad, common toad and grass snake, the most often found road-killed species. A citizen science approach appeared to be more cost-efficient than monitoring by professional researchers only when more than 400 km of road are monitored. Our findings showed that freely available remote sensing data in combination with a

Mass-media information campaigns about road safety. [previously known as: Public information about road safety.

NARCIS (Netherlands)

2009-01-01

In the Netherlands, public information is often used as an instrument to improve road safety. The purpose of each public information campaign is a voluntary and lasting change in traffic behaviour. This requires road users to have sufficient knowledge about a problem and to adapt their behaviour.

Forest road erosion control using multiobjective optimization

Science.gov (United States)

Matthew Thompson; John Sessions; Kevin Boston; Arne Skaugset; David Tomberlin

2010-01-01

Forest roads are associated with accelerated erosion and can be a major source of sediment delivery to streams, which can degrade aquatic habitat. Controlling road-related erosion therefore remains an important issue for forest stewardship. Managers are faced with the task to develop efficient road management strategies to achieve conflicting environmental and economic...

Updating Road Networks by Local Renewal from GPS Trajectories

Directory of Open Access Journals (Sweden)

Tao Wu

2016-09-01

Full Text Available The long production cycle and huge cost of collecting road network data often leave the data lagging behind the latest real conditions. However, this situation is rapidly changing as the positioning techniques ubiquitously used in mobile devices are gradually being implemented in road network research and applications. Currently, the predominant approaches infer road networks from mobile location information (e.g., GPS trajectory data directly using various extracting algorithms, which leads to expensive consumption of computational resources in the case of large-scale areas. For this reason, we propose an alternative that renews road networks with a novel spiral strategy, including a hidden Markov model (HMM for detecting potential problems in existing road network data and a method to update the data, on the local scale, by generating new road segments from trajectory data. The proposed approach reduces computation costs on roads with completed or updated information by updating problem road segments in the minimum range of the road network. We evaluated the performance of our proposals using GPS traces collected from taxies and OpenStreetMap (OSM road networks covering urban areas of Wuhan City.

DNR State Forest Roads - WHEELS Database

Data.gov (United States)

Minnesota Department of Natural Resources — Roads administered by the Commissioner of Natural Resources to provide access to lands administered by the Division of Forestry. These roads are generally open to...

Head-on crashes on two-way interurban roads: a public health concern in road safety.

Science.gov (United States)

Olabarria, Marta; Santamariña-Rubio, Elena; Marí-Dell'Olmo, Marc; Gotsens, Mercè; Novoa, Ana M; Borrell, Carme; Pérez, Katherine

2015-09-01

To describe the magnitude and characteristics of crashes and drivers involved in head-on crashes on two-way interurban roads in Spain between 2007 and 2012, and to identify the factors associated with the likelihood of head-on crashes on these roads compared with other types of crash. A cross-sectional study was conducted using the National Crash Register. The dependent variables were head-on crashes with injury (yes/no) and drivers involved in head-on crashes (yes/no). Factors associated with head-on crashes and with being a driver involved in a head-on crash versus other types of crash were studied using a multivariate robust Poisson regression model to estimate proportion ratios (PR) and confidence intervals (95% CI). There were 9,192 head-on crashes on two-way Spanish interurban roads. A total of 15,412 men and 3,862 women drivers were involved. Compared with other types of crash, head-on collisions were more likely on roads 7 m or more wide, on road sections with curves, narrowings or drop changes, on wet or snowy surfaces, and in twilight conditions. Transgressions committed by drivers involved in head-on crashes were driving in the opposite direction and incorrectly overtaking another vehicle. Factors associated with a lower probability of head-on crashes were the existence of medians (PR=0.57; 95%CI: 0.48-0.68) and a paved shoulder of less than 1.5 meters (PR=0.81; 95%CI: 0.77-0.86) or from 1.5 to 2.45 meters (PR=0.90; 95%CI: 0.84-0.96). This study allowed the characterization of crashes and drivers involved in head-on crashes on two-way interurban roads. The lower probability observed on roads with median strips point to these measures as an effective way to reduce these collisions. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

THE GREAT SILK ROAD BECOMES THE GREAT OIL AND GAS ROAD

Directory of Open Access Journals (Sweden)

I. S. Zonn

2015-01-01

Full Text Available The Great Silk Road (GSR called so in the late 19th century by German geographer Ferdinand von Richthofen started shaping in the 2nd century B.C. In the minds of peoples the Silk Road is a generalized symbol of trade caravan routes crossing Central Asia, connecting until the 16th century the Far East, in particular Japan, China, with Middle Asia. Appearance in the early 21st century of new independent states in Central Asia along the GSR route was a powerful impetus for revival of the ancient trade route. In September 2013 Xi Jinping, President of the People's Republic of China, during his visit to the Central Asian countries offered the strategic concept of joint construction of the “economic corridor along the Silk Road” based on innovative cooperation in order to revive and consolidate the economic contacts among the Eurasian countries. Establishment of the modern analog of GSR, a powerful transport and pipeline corridor includes the integrated system of railroads and automobile roads, oil and gas pipelines, airlines, and sea lines.

A theoretical perspective on road safety communication campaigns.

Science.gov (United States)

Elvik, Rune

2016-12-01

This paper proposes a theoretical perspective on road safety communication campaigns, which may help in identifying the conditions under which such campaigns can be effective. The paper proposes that, from a theoretical point of view, it is reasonable to assume that road user behaviour is, by and large, subjectively rational. This means that road users are assumed to behave the way they think is best. If this assumption is accepted, the best theoretical prediction is that road safety campaigns consisting of persuasive messages only will have no effect on road user behaviour and accordingly no effect on accidents. This theoretical prediction is not supported by meta-analyses of studies that have evaluated the effects of road safety communication campaigns. These analyses conclude that, on the average, such campaigns are associated with an accident reduction. The paper discusses whether this finding can be explained theoretically. The discussion relies on the distinction made by many modern theorists between bounded and perfect rationality. Road user behaviour is characterised by bounded rationality. Hence, if road users can gain insight into the bounds of their rationality, so that they see advantages to themselves of changing behaviour, they are likely to do so. It is, however, largely unknown whether such a mechanism explains why some road safety communication campaigns have been found to be more effective than others. Copyright © 2015 Elsevier Ltd. All rights reserved.

Putting road safety awareness into practice

CERN Multimedia

2003-01-01

To round off the series of articles and posters published as part of its road safety awareness campaign, CERN is organising two information and demonstration open days on 23 and 25 September. Can you brake in time ? Did you know that you are 21 times more at risk of being killed if you are not wearing a seat belt in the event of your car rolling over? All your questions on road safety will be answered at two special days that are being organized on 23 and 25 September. You will also be able to test your reflexes and your knowledge by taking part in demonstrations. The CERN Management attaches high priority to an improvement in safety standards on the Laboratory's roads. These two open days have been arranged to round off the road safety awareness and highway courtesy campaign which was launched last year. They are intended to provide us with an opportunity, through a more "hands-on" approach, of heightening our awareness of the risks associated with road traffic, of the legislation in force, and above all t...

Reconstruction of road defects and road roughness classification using vehicle responses with artificial neural networks simulation

CSIR Research Space (South Africa)

Ngwangwa, HM

2010-04-01

Full Text Available -1 Journal of Terramechanics Volume 47, Issue 2, April 2010, Pages 97-111 Reconstruction of road defects and road roughness classification using vehicle responses with artificial neural networks simulation H.M. Ngwangwaa, P.S. Heynsa, , , F...

An approach to accidents modeling based on compounds road environments.

Science.gov (United States)

Fernandes, Ana; Neves, Jose

2013-04-01

The most common approach to study the influence of certain road features on accidents has been the consideration of uniform road segments characterized by a unique feature. However, when an accident is related to the road infrastructure, its cause is usually not a single characteristic but rather a complex combination of several characteristics. The main objective of this paper is to describe a methodology developed in order to consider the road as a complete environment by using compound road environments, overcoming the limitations inherented in considering only uniform road segments. The methodology consists of: dividing a sample of roads into segments; grouping them into quite homogeneous road environments using cluster analysis; and identifying the influence of skid resistance and texture depth on road accidents in each environment by using generalized linear models. The application of this methodology is demonstrated for eight roads. Based on real data from accidents and road characteristics, three compound road environments were established where the pavement surface properties significantly influence the occurrence of accidents. Results have showed clearly that road environments where braking maneuvers are more common or those with small radii of curvature and high speeds require higher skid resistance and texture depth as an important contribution to the accident prevention. Copyright © 2013 Elsevier Ltd. All rights reserved.

Simplified methods for evaluating road prism stability

Science.gov (United States)

William J. Elliot; Mark Ballerini; David Hall

2003-01-01

Mass failure is one of the most common failures of low-volume roads in mountainous terrain. Current methods for evaluating stability of these roads require a geotechnical specialist. A stability analysis program, XSTABL, was used to estimate the stability of 3,696 combinations of road geometry, soil, and groundwater conditions. A sensitivity analysis was carried out to...

VT Data - E911 Road Centerlines

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata) EmergencyE911_RDS was originally derived from RDSnn (now called TransRoad_RDS). "Zero-length ranges" in the ROADS layer pertain to grand-fathered...

Introducing Dual Suspension System in Road Vehicles

Directory of Open Access Journals (Sweden)

Imtiaz Hussain

2013-04-01

Full Text Available The main objective of suspension system is to reduce the motions of the vehicle body with respect to road disturbances. The conventional suspension systems in road vehicles use passive elements such as springs and dampers to suppress the vibrations induced by the irregularities in the road. But these conventional suspension systems can suppress vibrations to a certain limit. This paper presents a novel idea to improve the ride quality of roads vehicles without compromising vehicle?s stability. The paper proposes the use of primary and secondary suspension to suppress the vibrations more effectively.

Tourism in protected areas: Disentangling road and traffic effects on intra-guild scavenging processes.

Science.gov (United States)

Donázar, José Antonio; Ceballos, Olga; Cortés-Avizanda, Ainara

2018-07-15

The expansion of road networks and the increase in traffic have emerged in recent years as key threats to the conservation of biodiversity. This is particularly concerning in many protected areas because the increase of recreational activities requiring the use of vehicles. Effects of roads and traffic within guild scenarios and ecological processes remain however poorly known. Here we examined how road proximity and traffic intensity influence patterns of resource use in an Old-World avian scavenger guild living in a protected natural park in northern Spain. We experimentally placed 130 carcasses at different distances from a scenic road in the centre of the park. Vehicles were recorded by means of traffic counters which revealed that maximum numbers were reached during weekends and holidays and during the middle hours of the day. Avian scavenger attendance at carcasses was recorded by means of camera-traps. Obligated scavengers, Eurasian griffon (Gyps fulvus) and Egyptian vultures (Neophron percnopterus) were frequently observed (59.4% and 37.7% of the consumed carcasses) together with five other facultative scavenger species. We found that the richness (number of species) and the probability of consumption of the resource were reduced the smaller the distance to the road and in days with higher traffic intensity. The same factors affected the probability of presence of all the scavenger species. Moreover, some of them, notably griffon vultures, showed hourly patterns of carcass attendance suggesting avoidance of maximum traffic levels. Our results highlight that roads and traffic would trigger consequences on the structure and functioning of scavenger food webs, which may be particularly concerning in protected areas with remarkable levels of biodiversity. Future regulations at protected areas should couple both traffic and tourist affluence with wildlife conservation. In this way important ecological processes would be preserved while maintaining a good

Targeted road safety programmes : a promising approach in road safety. Paper presented at `the second conference on Asian road safety', Beijing, October 28-31, 1996.

NARCIS (Netherlands)

Wegman, F.C.M.

1996-01-01

This paper gives a broad overview on targeted road safety programmes, mainly based on the activities of a so-called OECD scientific expert group, whose report has been published in 1994 (see C 2845 S (IRRD 864087). Examples of targeted road safety programmes are given in some more detail of Finland,

Frequency of Loaded Road March Training and Performance on a Loaded Road March

Science.gov (United States)

1990-04-01

heart rate through the use of beta - blockers can substantially improve shooting accuracy (29, 44). Post road march decrements in the grenade throw may...the road march. An Increase in body tremors due to fatigue or an elevated post exercise heart rate may account for this. Whole body sway while aiming...a rifle is substantially increased even after a short period of exercise (39) and this may effect accuracy. Muscle tremors increase after brief or

Value creation of road infrastructure networks: a structural equation approach

NARCIS (Netherlands)

Hartmann, Andreas; Ling, F.Y.Y.

2016-01-01

Although road agencies need to provide road infrastructure that is beneficial for road users, little is known about how the activities of the agencies influence the value creation of road infrastructure. From a service-dominant logic perspective, the importance of road maintenance and traffic

Unofficial Road Building in the Amazon: Socioeconomic and Biophysical Explanations

Science.gov (United States)

Perz, Stephen G.; Caldas, Marcellus M.; Arima, Eugenio; Walker, Robert J.

2007-01-01

Roads have manifold social and environmental impacts, including regional development, social conflicts and habitat fragmentation. 'Road ecology' has emerged as an approach to evaluate the various ecological and hydrological impacts of roads. This article aims to complement road ecology by examining the socio-spatial processes of road building itself. Focusing on the Brazilian Amazon, a heavily-studied context due to forest fragmentation by roads, the authors consider non-state social actors who build 'unofficial roads' for the purpose of gaining access to natural resources to support livelihoods and community development. They examine four case studies of roads with distinct histories in order to explain the socio-spatial processes behind road building in terms of profit maximization, land tenure claims, co-operative and conflictive political ecologies, and constraints as well as opportunities afforded by the biophysical environment. The study cases illustrate the need for a multi-pronged theoretical approach to understanding road building, and call for more attention to the role of non-state actors in unofficial road construction.

AN AUTOMATED ROAD ROUGHNESS DETECTION FROM MOBILE LASER SCANNING DATA

Directory of Open Access Journals (Sweden)

P. Kumar

2017-05-01

Full Text Available Rough roads influence the safety of the road users as accident rate increases with increasing unevenness of the road surface. Road roughness regions are required to be efficiently detected and located in order to ensure their maintenance. Mobile Laser Scanning (MLS systems provide a rapid and cost-effective alternative by providing accurate and dense point cloud data along route corridor. In this paper, an automated algorithm is presented for detecting road roughness from MLS data. The presented algorithm is based on interpolating smooth intensity raster surface from LiDAR point cloud data using point thinning process. The interpolated surface is further processed using morphological and multi-level Otsu thresholding operations to identify candidate road roughness regions. The candidate regions are finally filtered based on spatial density and standard deviation of elevation criteria to detect the roughness along the road surface. The test results of road roughness detection algorithm on two road sections are presented. The developed approach can be used to provide comprehensive information to road authorities in order to schedule maintenance and ensure maximum safety conditions for road users.

An Automated Road Roughness Detection from Mobile Laser Scanning Data

Science.gov (United States)

Kumar, P.; Angelats, E.

2017-05-01

Rough roads influence the safety of the road users as accident rate increases with increasing unevenness of the road surface. Road roughness regions are required to be efficiently detected and located in order to ensure their maintenance. Mobile Laser Scanning (MLS) systems provide a rapid and cost-effective alternative by providing accurate and dense point cloud data along route corridor. In this paper, an automated algorithm is presented for detecting road roughness from MLS data. The presented algorithm is based on interpolating smooth intensity raster surface from LiDAR point cloud data using point thinning process. The interpolated surface is further processed using morphological and multi-level Otsu thresholding operations to identify candidate road roughness regions. The candidate regions are finally filtered based on spatial density and standard deviation of elevation criteria to detect the roughness along the road surface. The test results of road roughness detection algorithm on two road sections are presented. The developed approach can be used to provide comprehensive information to road authorities in order to schedule maintenance and ensure maximum safety conditions for road users.

Carbon Nanomaterials for Road Construction

Directory of Open Access Journals (Sweden)

Zaporotskova Irina Vladimirovna

2015-05-01

Full Text Available The requirement of developing and modernizing the roads in Russia and in the Volgograd region in particular, is based on need of expanding the directions of scientific research on road and transport complexes. They have to be aimed at the development of the theory of transport streams, traffic safety increase, and, first of all, at the application of original methods of road development and modernization, introduction of modern technologies and road-building materials.On the basis of the analysis of the plans for transportation sphere development in the Volgograd region assuming the need to apply the new technologies allowing to create qualitative paving, the authors propose the technology of creating a heavy-duty paving with the use of carbon nanomaterial. The knowledge on strengthening the characteristics of carbon nanotubes is a unique material for nanotechnology development which allowed to assume the analysis of general information about asphalt concrete. The analysis showed that carbon nanotubes can be used for improvement of operational characteristics of asphalt concrete, and it is possible to carry out additives of nanotubes in hot as well as in cold bitumen. The article contains the basic principles of creation of the new road material received by means of bitumen reinforcing by carbon nanotubes. The structures received by the offered technique binding on the basis of the bitumens modified by carbon nanomaterial can be used for coverings and bases on highways of all categories in all road and climatic zones of Russia. The technical result consists in increasing the durability and elasticity of the received asphalt covering, and also the increase of water resistance, heat resistance and frost resistance, the expansion of temperature range of its laying in the field of negative temperatures.

Calibration of the inertial consistency index to assess road safety on horizontal curves of two-lane rural roads.

Science.gov (United States)

Llopis-Castelló, David; Camacho-Torregrosa, Francisco Javier; García, Alfredo

2018-05-26

One of every four road fatalities occurs on horizontal curves of two-lane rural roads. To this regard, many studies have been undertaken to analyze the crash risk on this road element. Most of them were based on the concept of geometric design consistency, which can be defined as how drivers' expectancies and road behavior relate. However, none of these studies included a variable which represents and estimates drivers' expectancies. This research presents a new local consistency model based on the Inertial Consistency Index (ICI). This consistency parameter is defined as the difference between the inertial operating speed, which represents drivers' expectations, and the operating speed, which represents road behavior. The inertial operating speed was defined as the weighted average operating speed of the preceding road section. In this way, different lengths, periods of time, and weighting distributions were studied to identify how the inertial operating speed should be calculated. As a result, drivers' expectancies should be estimated considering 15 s along the segment and a linear weighting distribution. This was consistent with drivers' expectancies acquirement process, which is closely related to Short-Term Memory. A Safety Performance Function was proposed to predict the number of crashes on a horizontal curve and consistency thresholds were defined based on the ICI. To this regard, the crash rate increased as the ICI increased. Finally, the proposed consistency model was compared with previous models. As a conclusion, the new Inertial Consistency Index allowed a more accurate estimation of the number of crashes and a better assessment of the consistency level on horizontal curves. Therefore, highway engineers have a new tool to identify where road crashes are more likely to occur during the design stage of both new two-lane rural roads and improvements of existing highways. Copyright © 2018 Elsevier Ltd. All rights reserved.

Road safety performance indicators : country profiles. SafetyNet, Building the European Road Safety Observatory, Workpackage 3, Deliverable 3.7b.

NARCIS (Netherlands)

Riguelle, F. Eksler, V. Holló, P. Morsink, P. Gent, A. van Gitelman, V. Assum, T. & Rackliff, L.

2009-01-01

The EC 6th Framework Integrated Project SafetyNet aims to accelerate the availability and use of harmonised road safety data in Europe. Having such data available throughout Europe would be tremendously beneficial for road safety, since it would enable the evaluation of road safety measures, the

GPS Roads

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — This data set contains a 1:100,000 scale vector digital representation of all interstate highways, all US highways, most of the state highways, and some county roads...

TOWARDS FINANCING AND PLANNING ROAD SAFETY AUDIT OPERATIONS IN NIGERIA

Directory of Open Access Journals (Sweden)

Joshua Adetunji ODELEYE, M.Sc.

2000-01-01

Finally, this paper suggests commissioning of a National Road Research Fund, with a view to developing an efficient road safety audit operational system. Also, the introduction of private initiatives and a Community-based Approach in road administration, as well as decentralization of road administration framework at all levels, will greatly help “engineer out” potentially unsafe features across Nigerian roads, towards a better road traffic environment in the 21st century.

Environmental damages of forest road construction by bulldozer on ...

African Journals Online (AJOL)

STORAGESEVER

2009-09-15

Sep 15, 2009 ... In this study, forest road construction technique by using bulldozer was investigated in forested lands ... example, sediment yield delivered from forest roads to ... minimize the erosional impact of roads on the environ- ... 951 mm. 4570 kg. Figure 2. Proportion of environmental damages on road cross section.

36 CFR 212.9 - Principles for sharing use of roads.

Science.gov (United States)

2010-07-01

... roads. 212.9 Section 212.9 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE... of roads. The use of roads under arrangements for sharing costs or performance shall be in accordance with the following: (a) Road improvement. Use of a road for commercial hauling, except occasional or...

Modelling the Probability of Landslides Impacting Road Networks

Science.gov (United States)

Taylor, F. E.; Malamud, B. D.

2012-04-01

During a landslide triggering event, the threat of landslides blocking roads poses a risk to logistics, rescue efforts and communities dependant on those road networks. Here we present preliminary results of a stochastic model we have developed to evaluate the probability of landslides intersecting a simple road network during a landslide triggering event and apply simple network indices to measure the state of the road network in the affected region. A 4000 x 4000 cell array with a 5 m x 5 m resolution was used, with a pre-defined simple road network laid onto it, and landslides 'randomly' dropped onto it. Landslide areas (AL) were randomly selected from a three-parameter inverse gamma probability density function, consisting of a power-law decay of about -2.4 for medium and large values of AL and an exponential rollover for small values of AL; the rollover (maximum probability) occurs at about AL = 400 m2 This statistical distribution was chosen based on three substantially complete triggered landslide inventories recorded in existing literature. The number of landslide areas (NL) selected for each triggered event iteration was chosen to have an average density of 1 landslide km-2, i.e. NL = 400 landslide areas chosen randomly for each iteration, and was based on several existing triggered landslide event inventories. A simple road network was chosen, in a 'T' shape configuration, with one road 1 x 4000 cells (5 m x 20 km) in a 'T' formation with another road 1 x 2000 cells (5 m x 10 km). The landslide areas were then randomly 'dropped' over the road array and indices such as the location, size (ABL) and number of road blockages (NBL) recorded. This process was performed 500 times (iterations) in a Monte-Carlo type simulation. Initial results show that for a landslide triggering event with 400 landslides over a 400 km2 region, the number of road blocks per iteration, NBL,ranges from 0 to 7. The average blockage area for the 500 iterations (A¯ BL) is about 3000 m

The failure to respond to changes in the road environment : Does road familiarity play a role?

NARCIS (Netherlands)

Martens, Marieke H.

2017-01-01

Road signs do not necessarily lead to the right response. Especially when signs are changed, drivers may not always detect new signs and may therefore fail to respond correctly to the situation indicated. The present driving simulator study investigated whether road familiarity (increased exposure

On-road driving impairments and associated cognitive deficits after stroke.

Science.gov (United States)

Devos, Hannes; Tant, Mark; Akinwuntan, Abiodun E

2014-01-01

Little is known about the critical on-road driving skills that get affected after a stroke. The purpose of this study was to investigate the key on-road driving impairments and their associated cognitive deficits after a stroke. A second aim was to investigate if lateralization of stroke impacts results of the cognitive and on-road driving tests. In this cross-sectional study, 99 participants with a first-ever stroke who were actively driving prior to stroke underwent a cognitive battery and a standardized road test that evaluated 13 specific on-road driving skills. These on-road driving skills were mapped onto an existing, theoretical framework that categorized the on-road items into hierarchic clusters of operational, tactical, visuo-integrative, and mixed driving skills. The total score on the road test and the on-road decision, made by a certified fitness-to-drive expert, decided the main outcome. The critical on-road driving skills predicting the on-road decision were identified using logistic regression analysis. Linear regression analysis was employed to determine the cognitive impairments leading to poor total on-road scores. Analyses were repeated for right- and left-sided strokes. In all, 37 persons scored poorly on the road test. These participants performed worse in all hierarchic clusters of on-road driving. Performances on the operational cluster and the visuo-integrative cluster best predicted on-road decisions (R(2) = 0.60). 'Lane changing' and 'understanding, insight, and quality of traffic participation' were the critical skill deficits leading to poor performance on the road test (R(2) = 0.65). Divided attention was the main determinant of on-road scores in the total group (R(2) = 0.06). Participants with right-sided stroke performed worse on visual field, visual neglect, visual scanning, visuo-constructive skills, and divided attention compared with those with left-sided stroke. Divided attention was the main determinant of total on-road scores

A Review of Roads Data Development Methodologies

Directory of Open Access Journals (Sweden)

Taro Ubukawa

2014-05-01

Full Text Available There is a clear need for a public domain data set of road networks with high special accuracy and global coverage for a range of applications. The Global Roads Open Access Data Set (gROADS, version 1, is a first step in that direction. gROADS relies on data from a wide range of sources and was developed using a range of methods. Traditionally, map development was highly centralized and controlled by government agencies due to the high cost or required expertise and technology. In the past decade, however, high resolution satellite imagery and global positioning system (GPS technologies have come into wide use, and there has been significant innovation in web services, such that a number of new methods to develop geospatial information have emerged, including automated and semi-automated road extraction from satellite/aerial imagery and crowdsourcing. In this paper we review the data sources, methods, and pros and cons of a range of road data development methods: heads-up digitizing, automated/semi-automated extraction from remote sensing imagery, GPS technology, crowdsourcing, and compiling existing data sets. We also consider the implications for each method in the production of open data.

Theoretical and experimental study of vibration, generated by monorail trains

Science.gov (United States)

Rybak, Samuil A.; Makhortykh, Sergey A.; Kostarev, Stanislav A.

2002-11-01

Monorail transport as all other city transport vehicles is the source of high noise and vibration levels. It is less widespread than cars or underground transport but its influence in modern cities enhances. Now in Moscow the first monorail road with trains on tires is designed, therefore the problem of vibration and noise assessments and prediction of its impact on the residential region appears. To assess the levels of generated vibration a physical model of interaction in the system wagon-tire-road coating-viaduct-soil has been proposed and then numerically analyzed. The model is based on the known from publications facts of automobile transport vibration and our own practice concerning underground trains vibration generation. To verify computer simulation results and adjust model parameters the series of measurements of noise and vibration near experimental monorail road was carried out. In the report the results of calculations and measurements will be presented and some outcomes of possible acoustical ecologic situation near monorail roads will be proposed.

2004 road traffic crashes in Queensland

Science.gov (United States)

2009-05-01

This report presents an overview of reported road traffic crashes in Queensland during : 2004 in the context of the previous five years based on data contained in the Queensland : Road Crash Information System maintained by the Department of Transpor...

An instrument for the measurement of road surface reflection properties

DEFF Research Database (Denmark)

Corell, Dennis Dan; Sørensen, K.

2017-01-01

surfaces in use have changed - for instance to road surface types with less noise from wheel passages. Because of this, a co-operation between the road administrations of the Nordic countries (abbreviated NMF) decided to construct a portable instrument to be used on selections of traffic roads within......Road surface reflection data in the form of standard r-tables serve as input for design calculations of road lighting installations on traffic roads. However, in several countries the use of the standard r-tables has not been verified by measurement in a long period of time, while the types of road...

Modeling road-tyre noise

OpenAIRE

Martins, Mário M. Abreu; Santos, Luís Picado; Freitas, Elisabete F.

2008-01-01

The growing awareness by the broader public of the consequences to health and wellbeing due to road noise has led to a growing number of legal requirements being produced to deal with this matter, both in the design of new or assessment of existing infrastructure. In this article the purpose is to make an up-to-date review of existing studies being carried out to deliver models for predicting noise produced from tyre-road contact, taking account of different methodological appr...

Road Situation and the Development of Katsina State, Nigeria ...

African Journals Online (AJOL)

This paper attempts an assessment of the road transport situation in the state based on the road network, road quality, vehicular movement and other infrastructures. It was found that there are many problems facing road transportation in the State. These problems are multi-faceted and range from high traffic, bad condition ...

Detection and analyse of hazardous roads in rural areas

DEFF Research Database (Denmark)

Sørensen, Michael

2003-01-01

For the last period of 5-10 years the notion "Grey roads" (hazardous roads) has appeared in Danish traffic safety work and improvement of these roads has become a very important part of the traffic safety work in many countries. The problem is, that the notion never has been clearly defined......, and therefore there are no unambiguos methods to point out and analyse "Grey roads". In this article based on a ph.D.-project a method to detecting "Grey roads" is introduced....

Engineering solutions of traffic safety problems of road transport

Directory of Open Access Journals (Sweden)

M. Bogdevičius

2004-02-01

Full Text Available The authors of this paper focus on the simulation of the motor vehicle movement (taking into consideration motor vehicle dynamics, motor vehicle hydraulic brake system influence on motor vehicle movement, interaction between its wheels with road pavements, road guardrail characteristics, interaction between motor vehicle and road guardrail on a certain road section and propose their specific solution of this problem. The presented results, illustrating the motor vehicle movement trajectories (motor vehicle braking and interaction between motor vehicle and road guardrail at various initial conditions and at various certain pavement surface of the road section under investigation and work of a motor vehicle hydraulic brake system. Taking into consideration the presented general mathematical model and computer aided test results it is possible to investigate various road transport traffic situations as well as to investigate various transport traffic safety problems.

Developing Road Infrastructure Route Planning: Increasing Feasibility of Toll Road Project

Directory of Open Access Journals (Sweden)

Mohammed Ali Berawi

2016-12-01

Full Text Available Indonesian government attempts to improve connectivity and to increase regional activities in SumateraIsland through the development of Trans Sumatera Toll Road (TSTR.However, despite its benefits to local economic development in Sumatera, the project shows low feasibility due to a low amount of investment. It can be attributed from the lack of planning in the initial phase to produce a comprehensive route that considers the various potentials of the regions. Thus, this research aims to investigate alternative routeplanning of Trans Sumatera Toll Road particularly in this paper for Central Sumatera by studying Gross Regional Domestic Product (GRDP, population and other significant factors. This research exposes cities and districts in Riau, West Sumatera, and Jambi which potentially contribute to the regional economy. Each selected towns and districts will be integrated with the intermodal system and connected to other functions to establish the Trans Sumatera Toll Roadproject in Central Sumatera. Compared to existing estimation of investment from public records, this alternative route has generated a competitive cost of investment which is estimated around 118,053,400,074,696 rupiahs. The research findings are expected to become the basis to improve other similar infrastructure toll road project development.

Gravel Roads: Maintenance and Design Manual

Science.gov (United States)

This manual was developed with a major emphasis on the maintenance of gravel roads, including some basic design elements. The purpose of the manual is to provide clear and helpful information for doing a better job of maintaining gravel roads.

RoadPlan Manual version 3.1

NARCIS (Netherlands)

Schoute, Albert L.

RoadPlan is an interactive planning and preprocessing tool to analyse and optimize multi-agv traffic. Currently it provides facilities for: * Traffic road map configuration and visualization; * Interactive drawing and modification of traffic layouts; * Collision and deadlock analysis of multiple

Effect of road surfacing condition on tyre life

CSIR Research Space (South Africa)

Steyn, WJvdM

2005-07-01

Full Text Available simple patching of potholes and sealing of cracks to a reseal of the road or even recycling and rehabilitation of the failed sections of the road. These maintenance actions affect the surfacing of the road and therefore the experience of the tyre...

ROAD TRANSPORT ACCIDENTS IN NIGERIA AND THE ROLE

Directory of Open Access Journals (Sweden)

Olasunkanmi Oriola AKINYEMI

2016-06-01

Full Text Available Analysis of road traffic accidents revealed that most accidents are as a result of drivers’ errors. Over the years, active safety systems (ASS were devised in vehicle to reduce the high level of road accidents, caused by human errors, leading to death and injuries.This study however evaluated the impacts of ASS inclusions into vehicles in Nigeria road transportation network. The objectives was to measure how ASS contributed to making driving safer and enhanced transport safety. Road accident data were collected, for a period of eleven years, from Lagos State Ministry of Economic Planning and Budget, Central Office of Statistics. Quantitative analysis of the retrospective accident was conducted by computing the proportion of yearly number of vehicles involved in road accident to the total number of vehicles for each year. Results of the analysis showed that the proportion of vehicles involved in road accidents decreased from 16 in 1996 to 0.89 in 2006, the injured persons reduced from 15.58 in 1998 to 0.3 in 2006 and the death rate diminished from 4.45 in 1998 to 0.1 in 2006. These represented 94.4%, 95% and 95% improvement respectively on road traffic safety. It can therefore be concluded that the inclusions of ASS into design of modern vehicles had improved road safety in Nigeria automotive industry.

Assessing impacts of roads: application of a standard assessment protocol

Science.gov (United States)

Duniway, Michael C.; Herrick, Jeffrey E.

2013-01-01

Adaptive management of road networks depends on timely data that accurately reflect the impacts those systems are having on ecosystem processes and associated services. In the absence of reliable data, land managers are left with little more than observations and perceptions to support management decisions of road-associated disturbances. Roads can negatively impact the soil, hydrologic, plant, and animal processes on which virtually all ecosystem services depend. The Interpreting Indicators of Rangeland Health (IIRH) protocol is a qualitative method that has been demonstrated to be effective in characterizing impacts of roads. The goal of this study were to develop, describe, and test an approach for using IIRH to systematically evaluate road impacts across large, diverse arid and semiarid landscapes. We developed a stratified random sampling approach to plot selection based on ecological potential, road inventory data, and image interpretation of road impacts. The test application on a semiarid landscape in southern New Mexico, United States, demonstrates that the approach developed is sensitive to road impacts across a broad range of ecological sites but that not all the types of stratification were useful. Ecological site and road inventory strata accounted for significant variability in the functioning of ecological processes but stratification based on apparent impact did not. Analysis of the repeatability of IIRH applied to road plots indicates that the method is repeatable but consensus evaluations based on multiple observers should be used to minimize risk of bias. Landscape-scale analysis of impacts by roads of contrasting designs (maintained dirt or gravel roads vs. non- or infrequently maintained roads) suggests that future travel management plans for the study area should consider concentrating traffic on fewer roads that are well designed and maintained. Application of the approach by land managers will likely provide important insights into

ROAD ACCIDENT AND SAFETY STUDY IN SYLHET REGION OF BANGLADESH

Directory of Open Access Journals (Sweden)

B. K. BANIK

2011-08-01

Full Text Available Roads, highways and streets are fundamental infrastructure facilities to provide the transportation for passenger travel and goods movement from one place to another in Sylhet, north–eastern division of Bangladesh with rapid growth of road vehicle, being comparatively developed economic tourist prone area faces severe road traffic accident. Such severe road accidents cause harsh safety hazards on the roads of Sylhet area. This research work presents an overview of the road traffic accident and degraded road safety situation in Sylhet zone which in particular, discusses the key road accident problem characteristics identifying the hazardous roads and spots, most responsible vehicles and related components, conditions of drivers and pedestrians, most victims of accident, effects of accident on society, safety priorities and options available in Sylhet. In this regard, a comprehensive questionnaire survey was conducted on the concerned groups of transportation and detailed accident data was collected from a popular local newspaper. Analysis of the study reveals that Dhaka- Sylhet highway is the most hazardous in road basis and Sylhet Sador thana is the most vulnerable in thana basis in Sylhet region.

25 CFR 170.802 - How is road maintenance funded?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false How is road maintenance funded? 170.802 Section 170.802 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.802 How is road maintenance funded? (a) The U.S. Congress funds a BIA...

Ecological study of road traffic injuries in the eastern Mediterranean region: country economic level, road user category and gender perspectives.

Science.gov (United States)

Sengoelge, Mathilde; Laflamme, Lucie; El-Khatib, Ziad

2018-02-13

The Eastern Mediterranean region has the second highest number of road traffic injury mortality rates after the African region based on 2013 data, with road traffic injuries accounting for 27% of the total injury mortality in the region. Globally the number of road traffic deaths has plateaued despite an increase in motorization, but it is uncertain whether this applies to the Region. This study investigated the regional trends in both road traffic injury mortality and morbidity and examined country-based differences considering on income level, categories of road users, and gender distribution. Register-based ecological study linking data from Global Burden of Disease Study with the United Nations Statistics Division for population and World Bank definition for country income level. Road traffic injury mortality rates and disability-adjusted life years were compiled for all ages at country level in 1995, 2005, 2015 and combined for a regional average (n = 22) and a global average (n = 122). The data were stratified by country economic level, road user category and gender. Road traffic injury mortality rates in the Region were higher than the global average for all three reference years but suggest a downward trend. In 2015 mortality rates were more than twice as high in low and high income countries compared to global income averages and motor vehicle occupants had a 3-fold greater mortality than the global average. Severe injuries decreased by more than half for high/middle income countries but remained high for low income countries; three times higher for males than females. Despite a potential downward trend, inequalities in road traffic injury mortality and morbidity burden remain high in the Eastern Mediterranean region. Action needs to be intensified and targeted to implement and enforce safety measures that prevent and mitigate severe motor vehicle crashes in high income countries especially and invest in efforts to promote public, active transport

Why are some animal populations unaffected or positively affected by roads?

Science.gov (United States)

Rytwinski, Trina; Fahrig, Lenore

2013-11-01

In reviews on effects of roads on animal population abundance we found that most effects are negative; however, there are also many neutral and positive responses [Fahrig and Rytwinski (Ecol Soc 14:21, 2009; Rytwinski and Fahrig (Biol Conserv 147:87-98, 2012)]. Here we use an individual-based simulation model to: (1) confirm predictions from the existing literature of the combinations of species traits and behavioural responses to roads that lead to negative effects of roads on animal population abundance, and (2) improve prediction of the combinations of species traits and behavioural responses to roads that lead to neutral and positive effects of roads on animal population abundance. Simulations represented a typical situation in which road mitigation is contemplated, i.e. rural landscapes containing a relatively low density (up to 1.86 km/km(2)) of high-traffic roads, with continuous habitat between the roads. In these landscapes, the simulations predict that populations of species with small territories and movement ranges, and high reproductive rates, i.e. many small mammals and birds, should not be reduced by roads. Contrary to previous suggestions, the results also predict that populations of species that obtain a resource from roads (e.g. vultures) do not increase with increasing road density. In addition, our simulations support the predation release hypothesis for positive road effects on prey (both small- and large-bodied prey), whereby abundance of a prey species increased with increasing road density due to reduced predation by generalist road-affected predators. The simulations also predict an optimal road density for the large-bodied prey species if it avoids roads or traffic emissions. Overall, the simulation results suggest that in rural landscapes containing high-traffic roads, there are many species for which road mitigation may not be necessary; mitigation efforts should be tailored to the species that show negative population responses to roads.

[Evidence-based effectiveness of road safety interventions: a literature review].

Science.gov (United States)

Novoa, Ana M; Pérez, Katherine; Borrell, Carme

2009-01-01

Only road safety interventions with scientific evidence supporting their effectiveness should be implemented. The objective of this study was to identify and summarize the available evidence on the effectiveness of road safety interventions in reducing road traffic collisions, injuries and deaths. All literature reviews published in scientific journals that assessed the effectiveness of one or more road safety interventions and whose outcome measure was road traffic crashes, injuries or fatalities were included. An exhaustive search was performed in scientific literature databases. The interventions were classified according to the evidence of their effectiveness in reducing road traffic injuries (effective interventions, insufficient evidence of effectiveness, ineffective interventions) following the structure of the Haddon matrix. Fifty-four reviews were included. Effective interventions were found before, during and after the collision, and across all factors: a) the individual: the graduated licensing system (31% road traffic injury reduction); b) the vehicle: electronic stability control system (2 to 41% reduction); c) the infrastructure: area-wide traffic calming (0 to 20%), and d) the social environment: speed cameras (7 to 30%). Certain road safety interventions are ineffective, mostly road safety education, and others require further investigation. The most successful interventions are those that reduce or eliminate the hazard and do not depend on changes in road users' behavior or on their knowledge of road safety issues. Interventions based exclusively on education are ineffective in reducing road traffic injuries.

Road safety and road traffic accidents in Saudi Arabia. A systematic review of existing evidence.

Science.gov (United States)

Mansuri, Farah A; Al-Zalabani, Abdulmohsen H; Zalat, Marwa M; Qabshawi, Reem I

2015-04-01

To identify the changing trends and crucial preventive approaches to road traffic accidents (RTAs) adopted in the Kingdom of Saudi Arabia (KSA) over the last 2.5 decades, and to analyze aspects previously overlooked. This systematic review was based on evidence of RTAs in KSA. All articles published during the last 25 years on road traffic accident in KSA were analyzed. This study was carried out from December 2013 to May 2014 in the Department of Family and Community Medicine, Taibah University, Al-Madinah Al-Munawwarah, KSA. Road traffic accidents accounted for 83.4% of all trauma admissions in 1984-1989, and no such overall trend was studied thereafter. The most frequently injured body regions as reported in the latest studies were head and neck, followed by upper and lower extremities, which was found to be opposite to that of the studies reported earlier. Hospital data showed an 8% non-significant increase in road accident mortalities in contrast to police records of a 27% significant reduction during the years 2005-2010. Excessive speeding was the most common cause reported in all recent and past studies. Disparity was common in the type of reporting of RTAs, outcome measures, and possible causes over a period of 2.5 decade. All research exclusively looked into the drivers' faults. A sentinel surveillance of road crashes should be kept in place in the secondary and tertiary care hospitals for all regions of KSA.

Pricing road use: politico-economic and fairness considerations

Energy Technology Data Exchange (ETDEWEB)

Oberholzer-Gee, F. [University of Pennsylvania, Pittsburgh (United States); Weck-Hannemann, H. [University of Innsbruck (Austria). Institute of of Public Finance

2002-09-01

Road pricing measures are rarely adopted in practice. In this review, we ask why citizens are not more supportive of road pricing. We identify two difficulties. First, the general public is often unwilling to embrace the price system as an allocation mechanism for scarce resources. Second, for politico-economic reasons, any latent support for road pricing schemes rarely translates into actual policy-making. Based on our analysis, we outline components of a road pricing policy that might receive greater electoral support. (author)

Air pollution due to road traffic in Ljubljana

Directory of Open Access Journals (Sweden)

Matej Ogrin

2007-01-01

Full Text Available Air pollution is due to road traffic an inevitable outcome of internal combustion in engines ofvehicles and some other processes. Air near the roads is more polluted with some pollutants,such as carbon monoxide, nitrogen oxides, ozone, particulate matter and some others.Monitoring the air quality is a key issue, when one wants to estimate environmental impactsof the road traffic. The article shows a method of passive samplers for air quality monitoringalong different roads in the area of Ljubljana Municipality.

Material and component road map

International Nuclear Information System (INIS)

Korea Industrial Technology Foundation Editorial Department

2007-09-01

This book is comprised of two parts. One is divided into five chapters, which deals with summary of environment-friendly coloring technology, industry tendency of environment-friendly coloring technology, industry analysis and vision of environment-friendly coloring technology, analysis on core technology for environment-friendly coloring technology, with eco-friendly water paint and painting skill and eco-friendly surface treatment skill using electrochemical process. The other is divided into five chapters, which handles outline of display printing technology road map market trends of display painting, analysis and vision of display painting deduction of core-technology for display painting and analysis of core-technology for display painting. It has Diagrams for eco-friendly coloring technology road map and core-technology display painting road map.

36 CFR 223.37 - Revegetation of temporary roads.

Science.gov (United States)

2010-07-01

... roads. 223.37 Section 223.37 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF... Provisions § 223.37 Revegetation of temporary roads. Timber sale contracts, permits and other documents... roads constructed or used thereunder so as to permit the reestablishment by artificial or natural means...

Urban snow indicates pollution originating from road traffic.

Science.gov (United States)

Kuoppamäki, Kirsi; Setälä, Heikki; Rantalainen, Anna-Lea; Kotze, D Johan

2014-12-01

Traffic is a major source of pollutants in cities. In this well-replicated study we analysed a broad array of contaminants in snowpacks along roads of different traffic intensities. The majority of pollutants showed a similar pattern with respect to traffic intensity: pH and conductivity as well as concentrations of PAHs, total suspended solids, phosphorus and most heavy metals were higher next to high intensity roads compared to low intensity roads. These pollutant levels also decreased considerably up to 5 m distance from the roads. Furthermore, apart from nitrogen, these variables increased in concentration from control sites in urban forest patches to road bank sites next to roads of low, intermediate and high traffic intensities. The deposition pattern of various traffic-derived pollutants--whether gaseous or particle-bound--was the same. Such information can be useful for the purposes of managing pollutants in urban areas. Copyright © 2014 Elsevier Ltd. All rights reserved.

Overview of Nanotechnology in Road Engineering

OpenAIRE

Arpit Singh; Dr. Sangita; Arpan Singh

2015-01-01

Nanotechnology has changed our vision, expectations, and abilities to control the material world. This paper examines and document applicable nanotechnology based product that can be improve the overall competitiveness of the Road engineering industry. In this review, nanotechnology is applying in road sector.

Snow Roads at McMurdo Station, Antarctica

Science.gov (United States)

2010-05-01

is minimized distribution of low strength areas (also called “ holidays ”). Holidays are actually areas of pulverized snow that are missed or inade...quately processed. Though holidays usually occur sporadically, any single flaw may extend through the entire thickness of an unelevated road. The...Pegasus Road and the LDB pad. A few additional sites were chosen for comparison (Williams Field, virgin snow, etc.). Williams Field Road densities

Explaining the road accident risk: weather effects.

Science.gov (United States)

Bergel-Hayat, Ruth; Debbarh, Mohammed; Antoniou, Constantinos; Yannis, George

2013-11-01

This research aims to highlight the link between weather conditions and road accident risk at an aggregate level and on a monthly basis, in order to improve road safety monitoring at a national level. It is based on some case studies carried out in Work Package 7 on "Data analysis and synthesis" of the EU-FP6 project "SafetyNet-Building the European Road Safety Observatory", which illustrate the use of weather variables for analysing changes in the number of road injury accidents. Time series analysis models with explanatory variables that measure the weather quantitatively were used and applied to aggregate datasets of injury accidents for France, the Netherlands and the Athens region, over periods of more than 20 years. The main results reveal significant correlations on a monthly basis between weather variables and the aggregate number of injury accidents, but the magnitude and even the sign of these correlations vary according to the type of road (motorways, rural roads or urban roads). Moreover, in the case of the interurban network in France, it appears that the rainfall effect is mainly direct on motorways--exposure being unchanged, and partly indirect on main roads--as a result of changes in exposure. Additional results obtained on a daily basis for the Athens region indicate that capturing the within-the-month variability of the weather variables and including it in a monthly model highlights the effects of extreme weather. Such findings are consistent with previous results obtained for France using a similar approach, with the exception of the negative correlation between precipitation and the number of injury accidents found for the Athens region, which is further investigated. The outlook for the approach and its added value are discussed in the conclusion. Copyright © 2013. Published by Elsevier Ltd.

The quantifying of road safety developments. Paper presented at the International Conference 'Road Safety in Europe', Birmingham, September 9-11, 1996.

NARCIS (Netherlands)

Koornstra, M.J.

1996-01-01

The evaluation of the effectiveness of road safety policies and measures must be based on quantative information in road safety developments and the relevant variables that influence that development. However, the concept of road safety itself is not well defined theoretically and quantatively. This

Can roads be used as transects for primate population surveys?.

Science.gov (United States)

Hilário, Renato R; Rodrigues, Flávio H G; Chiarello, Adriano G; Mourthé, Italo

2012-01-01

Line transect distance sampling (LTDS) can be applied to either trails or roads. However, it is likely that sampling along roads might result in biased density estimates. In this paper, we compared the results obtained with LTDS applied on trails and roads for two primate species (Callithrix penicillata and Callicebus nigrifrons) to clarify whether roads are appropriate transects to estimate densities. We performed standard LTDS surveys in two nature reserves in south-eastern Brazil. Effective strip width and population density were different between trails and roads for C. penicillata, but not for C. nigrifrons. The results suggest that roads are not appropriate for use as transects in primate surveys, at least for some species. Further work is required to fully understand this issue, but in the meantime we recommend that researchers avoid using roads as transects or treat roads and trails as covariates when sampling on roads is unavoidable. Copyright © 2012 S. Karger AG, Basel.

Effects of Roads on Amphibian Populations

DEFF Research Database (Denmark)

Hels, T.

is the result of my three year PhD study at the National Environmental Research Institute, Kalø, and University of Copenhagen. Funded by NERI, the Danish Research Academy, and the Danish Road Directorate, it has dealt mainly with the effects of traffic and roads on amphibian populations. The Spadefoot toad...... of Spadefoot toads (Pelobates fuscus Laur.) II The effect of road kills on amphibian populations III Simulating viability of a Spadefoot toad (P. fuscus) metapopulation in a landscape fragmented by a road The manuscripts are preceded by a synopsis which sums up the work and puts it into a broader perspective......, Johan Elmberg, Andreas Seiler, and Per Sjögren-Gulve, for sharing your knowledge and enthusiasm for science with me. Constructive ideas, different approaches, and elaborate discussions are crucial parts of any scientific process: I thank Lenore Fahrig for dedicated and original teaching and discussions...

Road safety: serious injuries remain a major unsolved problem.

Science.gov (United States)

Beck, Ben; Cameron, Peter A; Fitzgerald, Mark C; Judson, Rodney T; Teague, Warwick; Lyons, Ronan A; Gabbe, Belinda J

2017-09-18

To investigate temporal trends in the incidence, mortality, disability-adjusted life-years (DALYs), and costs of health loss caused by serious road traffic injury. A retrospective review of data from the population-based Victorian State Trauma Registry and the National Coronial Information System on road traffic-related deaths (pre- and in-hospital) and major trauma (Injury Severity Score > 12) during 2007-2015.Main outcomes and measures: Temporal trends in the incidence of road traffic-related major trauma, mortality, DALYs, and costs of health loss, by road user type. There were 8066 hospitalised road traffic major trauma cases and 2588 road traffic fatalities in Victoria over the 9-year study period. There was no change in the incidence of hospitalised major trauma for motor vehicle occupants (incidence rate ratio [IRR] per year, 1.00; 95% CI, 0.99-1.01; P = 0.70), motorcyclists (IRR, 0.99; 95% CI, 0.97-1.01; P = 0.45) or pedestrians (IRR, 1.00; 95% CI, 0.97-1.02; P = 0.73), but the incidence for pedal cyclists increased 8% per year (IRR, 1.08; 95% CI; 1.05-1.10; P road traffic injuries exceeded $14 billion during 2007-2015, although the cost per patient declined for all road user groups. As serious injury rates have not declined, current road safety targets will be difficult to meet. Greater attention to preventing serious injury is needed, as is further investment in road safety, particularly for pedal cyclists.

Marine dredged sediments as new materials resource for road construction.

Science.gov (United States)

Siham, Kamali; Fabrice, Bernard; Edine, Abriak Nor; Patrick, Degrugilliers

2008-01-01

Large volumes of sediments are dredged each year in Europe in order to maintain harbour activities. With the new European Union directives, harbour managers are encouraged to find environmentally sound solutions for these materials. This paper investigates the potential uses of Dunkirk marine dredged sediment as a new material resource for road building. The mineralogical composition of sediments is evaluated using X-ray diffraction and microscopy analysis. Since sediments contain a high amount of water, a dewatering treatment has been used. Different suitable mixtures, checking specific geotechnical criteria as required in French standards, are identified. The mixtures are then optimized for an economical reuse. The mechanical tests conducted on these mixtures are compaction, bearing capacity, compression and tensile tests. The experimental results show the feasibility of the beneficial use of Dunkirk marine dredged sand and sediments as a new material for the construction of foundation and base layers for roads. Further research is now needed to prove the resistance of this new material to various environmental impacts (e.g., frost damage).

Geochemical anomalies from bottom ash in a road construction--comparison of the leaching potential between an ash road and the surroundings.

Science.gov (United States)

Lind, Bo B; Norrman, Jenny; Larsson, Lennart B; Ohlsson, Sten-Ake; Bristav, Henrik

2008-01-01

A study was performed between June 2001 and December 2004 with the primary objective of assessing long-term leaching from municipal solid waste incineration bottom ash in a test road construction in relation to a reference road made up of conventional materials and the natural geochemical conditions in the surroundings. The metal leaching from the test road and the reference road was compared with the natural weathering in the regional surroundings for three time scales: 16, 80 and 1000 years. The results show that Cu and Zn cause a geochemical anomaly from the test road compared with the surroundings. The leaching of Cu from the test road is initially high but will decline with time and will in the long term be exceeded by natural weathering. Zn on the other hand has low initial leaching, which will increase with time and will in the long term exceed that of the test road and the surroundings by a factor of 100-300. For the other metals studied, Al, Na, K and Mg, there is only very limited leaching over time and the potential accumulation will not exceed the background values in a 1000 years.

Traffic mortality and the role of minor roads.

NARCIS (Netherlands)

Langevelde, F.; van Dooremalen, J.A.; Jaarsma, C.F.

2009-01-01

Roads have large impacts on wildlife, as they form one of the principal causes of mortality, and disturbance and fragmentation of habitat. These impacts are mainly studied and mitigated on major roads. It is, however, a widespread misconception that most animals are killed on major roads. In this

Private Roads

NARCIS (Netherlands)

Verhoef, Erik T.

2007-01-01

This paper studies the efficiency impacts of private toll roads in initially untolled networks. The analysis allows for capacity and toll choice by private operators, and endogenizes entry and therewith the degree of competition, distinguishing and allowing for both parallel and serial competition.

Management of roads with abnormal radiation

International Nuclear Information System (INIS)

Chen Wenfang; Huang Jehnying; Chin, Chingjer; Chen Yibin

2002-01-01

Several asphalt concrete (AC) roads in Taoyuan County of Taiwan were found radioactively abnormal in 1994. Atomic Energy Council (AEC), the regulatory agency, was asked to take the samples, to perform the radiochemical analysis and dose evaluation as well as to investigate the source of contamination. The cause of high radiation was due to high uranium and thorium concentration slag used in the AC. The dose rate was approximately 1 μSv/hr at the road surface. The maximum annual dose received by pedestrians was estimated at 0.13 mSv (2.5% of annual dose limit of 5 mSv for the public), or approximately 1/15 of the value of annual natural background radiation in the Taiwan area. Consequently, the AEC suggested that there was no need to implement engineering remedy measures to remove the AC surface of the roads. However, upon consideration of socioeconomic condition and public opinion, the local government still decided to remove the contaminated surface of these roads. The AEC helped to formulate the operational procedures for removal and disposal of the AC including the radiation protection program and the disposal site. To date, all the contaminated AC surface of the roads was removed and properly disposed. The contaminated AC roads are a typical example of improper disposal of wastes containing Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM). A new regulation was promulgated by AEC recently to limit the use of slag, coal ash or any other industrial wastes unless its radiation or activity level is below the limit. (author)

Vulnerability analysis methods for road networks

Science.gov (United States)

Bíl, Michal; Vodák, Rostislav; Kubeček, Jan; Rebok, Tomáš; Svoboda, Tomáš

2014-05-01

Road networks rank among the most important lifelines of modern society. They can be damaged by either random or intentional events. Roads are also often affected by natural hazards, the impacts of which are both direct and indirect. Whereas direct impacts (e.g. roads damaged by a landslide or due to flooding) are localized in close proximity to the natural hazard occurrence, the indirect impacts can entail widespread service disabilities and considerable travel delays. The change in flows in the network may affect the population living far from the places originally impacted by the natural disaster. These effects are primarily possible due to the intrinsic nature of this system. The consequences and extent of the indirect costs also depend on the set of road links which were damaged, because the road links differ in terms of their importance. The more robust (interconnected) the road network is, the less time is usually needed to secure the serviceability of an area hit by a disaster. These kinds of networks also demonstrate a higher degree of resilience. Evaluating road network structures is therefore essential in any type of vulnerability and resilience analysis. There are a range of approaches used for evaluation of the vulnerability of a network and for identification of the weakest road links. Only few of them are, however, capable of simulating the impacts of the simultaneous closure of numerous links, which often occurs during a disaster. The primary problem is that in the case of a disaster, which usually has a large regional extent, the road network may remain disconnected. The majority of the commonly used indices use direct computation of the shortest paths or time between OD (origin - destination) pairs and therefore cannot be applied when the network breaks up into two or more components. Since extensive break-ups often occur in cases of major disasters, it is important to study the network vulnerability in these cases as well, so that appropriate

[Road traffic injuries in Mexico: evidences to strengthen the Mexican road safety strategy].

Science.gov (United States)

Pérez-Núñez, Ricardo; Híjar, Martha; Celis, Alfredo; Hidalgo-Solórzano, Elisa

2014-05-01

Based on a review of secondary data and the scientific literature and an analysis of the ENSANut-2012 database, the current study provides a comprehensive overview of the current burden of road traffic injuries (RTI) in Mexico and analyzes the country's social response to RTI. The high collision, injury, mortality, and disability rates associated with this public health problem represent a high cost for Mexican society, especially for families. The paper argues that the Mexican response has focused on vehicle occupants while overlooking vulnerable road users and has prioritized strategies with limited effectiveness. Although the country's existing legislation addresses the main risk factors, enforcement has been limited. Finally, the paper makes some recommendations for strengthening the Mexican strategy to prevent RTI, such as safe, equitable, healthy, and sustainable mobility for all types of road users. Despite some strides in RTI prevention, there are still challenges and opportunities to be addressed in the future.

25 CFR 170.801 - What is the BIA Road Maintenance Program?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is the BIA Road Maintenance Program? 170.801 Section... ROADS PROGRAM BIA Road Maintenance § 170.801 What is the BIA Road Maintenance Program? The BIA Road... subpart contains a list of activities that are eligible for funding under the BIA road maintenance program. ...

Spatial Resolution Effect on Forest Road Gradient Calculation and Erosion Modelling

Science.gov (United States)

Cao, L.; Elliot, W.

2017-12-01

Road erosion is one of the main sediment sources in a forest watershed and should be properly evaluated. With the help of GIS technology, road topography can be determined and soil loss can be predicted at a watershed scale. As a vector geographical feature, the road gradient should be calculated following road direction rather than hillslope direction. This calculation might be difficult with a coarse (30-m) DEM which only provides the underlying topography information. This study was designed to explore the effect of road segmentation and DEM resolution on the road gradient calculation and erosion prediction at a watershed scale. The Water Erosion Prediction Project (WEPP) model was run on road segments of 9 lengths ranging from 40m to 200m. Road gradient was calculated from three DEM data sets: 1m LiDAR, and 10m and 30m USGS DEMs. The 1m LiDAR DEM calculated gradients were very close to the field observed road gradients, so we assumed the 1m LiDAR DEM predicted the true road gradient. The results revealed that longer road segments skipped detail topographical undulations and resulted in lower road gradients. Coarser DEMs computed steeper road gradients as larger grid cells covered more adjacent areas outside road resulting in larger elevation differences. Field surveyed results also revealed that coarser DEM might result in more gradient deviation in a curved road segment when it passes through a convex or concave slope. As road segment length increased, the gradient difference between three DEMs was reduced. There were no significant differences between road gradients of different segment lengths and DEM resolution when segments were longer than 100m. For long segments, the 10m DEM calculated road gradient was similar to the 1m LiDAR gradient. When evaluating the effects of road segment length, the predicted erosion rate decreased with increasing length when road gradient was less than 3%. In cases where the road gradients exceed 3% and rill erosion dominates

Analysis of Child-related Road Traffic Accidents in Vietnam

Science.gov (United States)

Vu, Anh Tuan; Nguyen, Dinh Vinh Man

2018-04-01

In recent years, the number of road traffic accidents, fatalities and injuries have been decreasing, but the figures of children road traffic accidents have been increasing in Ho Chi Minh City of Vietnam. This fact strongly calls for implementing effective solutions to improve traffic safety for children by the local government. This paper presents the trends, patterns and causes of road traffic accidents involving children based on the analysis of road traffic accident data over the period 2010-2015 and the video-based observations of road traffic law violations at 15 typical school gates and 10 typical roads. The results could be useful for the city government to formulate solutions to effectively improve traffic safety for children in Ho Chi Minh City and other cities in Vietnam.

Tyre tread-block friction: modelling, simulation and experimental validation

Science.gov (United States)

Wallaschek, Jörg; Wies, Burkard

2013-07-01

Pneumatic tyres are used in vehicles since the beginning of the last century. They generate braking and steering forces for bicycles, motor cycles, cars, busses, trucks, agricultural vehicles and aircraft. These forces are generated in the usually very small contact area between tyre and road and their performance characteristics are of eminent importance for safety and comfort. Much research has been addressed to optimise tyre design with respect to footprint pressure and friction. In this context, the development of virtual tyre prototypes, that is, simulation models for the tyre, has grown to a science in its own. While the modelling of the structural dynamics of the tyre has reached a very advanced level, which allows to take into account effects like the rate-independent inelasticity of filled elastomers or the transient 3D deformations of the ply-reinforced tread, shoulder and sidewalls, little is known about the friction between tread-block elements and road. This is particularly obvious in the case when snow, ice, water or a third-body layer are present in the tyre-road contact. In the present paper, we give a survey on the present state of knowledge in the modelling, simulation and experimental validation of tyre tread-block friction processes. We concentrate on experimental techniques.

Soil retention of hexavalent chromium released from construction and demolition waste in a road-base-application scenario.

Science.gov (United States)

Butera, Stefania; Trapp, Stefan; Astrup, Thomas F; Christensen, Thomas H

2015-11-15

We investigated the retention of Cr(VI) in three subsoils with low organic matter content in laboratory experiments at concentration levels relevant to represent leachates from construction and demolition waste (C&DW) reused as unbound material in road construction. The retention mechanism appeared to be reduction and subsequent precipitation as Cr(III) on the soil. The reduction process was slow and in several experiments it was still proceeding at the end of the six-month experimental period. The overall retention reaction fit well with a second-order reaction governed by actual Cr(VI) concentration and reduction capacity of the soil. The experimentally determined reduction capacities and second-order kinetic parameters were used to model, for a 100-year period, the one-dimensional migration of Cr(VI) in the subsoil under a layer of C&DW. The resulting Cr(VI) concentration would be negligible below 7-70 cm depth. However, in rigid climates and with high water infiltration through the road pavement, the reduction reaction could be so slow that Cr(VI) might migrate as deep as 200 cm under the road. The reaction parameters and the model can form the basis for systematically assessing under which scenarios Cr(VI) from C&DW could lead to an environmental issue for ground- and receiving surface waters. Copyright © 2015 Elsevier B.V. All rights reserved.

Sleep-related vehicle crashes on low speed roads.

Science.gov (United States)

Filtness, A J; Armstrong, K A; Watson, A; Smith, S S

2017-02-01

Very little is known about the characteristics of sleep related (SR) crashes occurring on low speed roads compared with current understanding of the role of sleep in crashes occurring on high speed roads e.g. motorways. To address this gap, analyses were undertaken to identify the differences and similarities between (1) SR crashes occurring on roads with low (≤60km/h) and high (≥100km/h) speed limits, and (2) SR crashes and not-SR crashes occurring on roads with low speed limits. Police reports of all crashes occurring on low and high speed roads over a ten year period between 2000 and 2009 were examined for Queensland, Australia. Attending police officers identified all crash attributes, including 'fatigue/fell asleep', which indicates that the police believe the crash to have a causal factor relating to falling asleep, sleepiness due to sleep loss, time of day, or fatigue. Driver or rider involvement in crashes was classified as SR or not-SR. All crash-associated variables were compared using Chi-square tests (Cramer's V=effect size). A series of logistic regression was performed, with driver and crash characteristics as predictors of crash category. A conservative alpha level of 0.001 determined statistical significance. There were 440,855 drivers or riders involved in a crash during this time; 6923 (1.6%) were attributed as SR. SR crashes on low speed roads have similar characteristics to those on high speed roads with young (16-24y) males consistently over represented. SR crashes on low speed roads are noticeably different to not-SR crashes in the same speed zone in that male and young novice drivers are over represented and outcomes are more severe. Of all the SR crashes identified, 41% occurred on low speed roads. SR crashes are not confined to high speed roads. Low speed SR crashes warrant specific investigation because they occur in densely populated areas, exposing a greater number of people to risk and have more severe outcomes than not-SR crashes

Determination of road dust loadings and chemical characteristics using resuspension.

Science.gov (United States)

Chen, Jianhua; Wang, Wei; Liu, Hongjie; Ren, Lihong

2012-03-01

The contribution of fugitive dust from traffic to air pollution can no longer be ignored in China. In order to obtain the road dust loadings and to understand the chemical characteristics of PM(10) and PM(2.5) from typical road dust, different paved roads in eight districts of Beijing were selected for dust collection during the four seasons of 2005. Ninety-eight samples from 28 roads were obtained. The samples were resuspended using equipment assembled to simulate the rising process of road dust caused by the wind or wheels in order to obtain the PM(10) and PM(2.5) filter samples. The average road dust loading was 3.82 g m(-2), with the highest of 24.22 g m(-2) being in Hutongs in the rural-urban continuum during winter. The road dust loadings on higher-grade roads were lower than those on lower-grade roads. Attention should be paid to the pollution in the rural-urban continuum areas. The sums of element abundances measured were 16.17% and 18.50% for PM(10) and PM(2.5) in road dust. The average abundances of OC and EC in PM(10) and PM(2.5) in road dust were 11.52%, 2.01% and 12.50%, 2.06%, respectively. The abundance of elements, water-soluble ions, and OC, EC in PM(10) and PM(2.5) resuspended from road dust did not change greatly with seasons and road types. The soil dust, construction dust, dust emitted from burning coal, vehicle exhaust, and deposition of particles in the air were the main sources of road dust in Beijing. Affected by the application of snow-melting agents in Beijing during winter, the amount of Cl( - ) and Na( + ) was much higher during that time than in the other seasons. This will have a certain influence on roads, bridges, vegetations, and groundwater.

Road traffic emission monitoring on motorways