WorldWideScience

Sample records for experimental breeder reactor

  1. Experimental Breeder Reactor I Preservation Plan

    Energy Technology Data Exchange (ETDEWEB)

    Julie Braun

    2006-10-01

    Experimental Breeder Reactor I (EBR I) is a National Historic Landmark located at the Idaho National Laboratory, a Department of Energy laboratory in southeastern Idaho. The facility is significant for its association and contributions to the development of nuclear reactor testing and development. This Plan includes a structural assessment of the interior and exterior of the EBR I Reactor Building from a preservation, rather than an engineering stand point and recommendations for maintenance to ensure its continued protection.

  2. Fast Breeder Reactor studies

    Energy Technology Data Exchange (ETDEWEB)

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.

    1980-07-01

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts.

  3. The manufacture of enriched uranium fuel slugs for the Experimental Breeder Reactor.

    Energy Technology Data Exchange (ETDEWEB)

    Shuck, Author B.

    1953-04-20

    This report describes the specifications, materials and the sequence of operations used to found and fabricate 4 the first charge of enriched uranium fuel in the Experimental Breeder Reactor. The work was governed by the following principles: a. That the fuel be of correct composition, dimension and metallurgical condition for use in the reactor. b. That a maximum yield of finished fuel slugs from the quantity of uranium available for the program be achieved. c. That the residues be in a form which can be recovered by chemical or other means. d. That a detailed record be kept in such form that a complete history of each fuel slug be available.

  4. Advanced automation concepts applied to Experimental Breeder Reactor-II startup

    Energy Technology Data Exchange (ETDEWEB)

    Berkan, R.C.; Upadhyaya, B.R.; Bywater, R.L. (Tennessee Univ., Knoxville, TN (United States). Dept. of Nuclear Engineering); Kisner, R.A. (Oak Ridge National Lab., TN (United States))

    1991-08-01

    The major objective of this work is to demonstrate through simulations that advanced liquid-metal reactor plants can be operated from low power by computer control. Development of an automatic control system with this objective will help resolve specific issues and provide proof through demonstration that automatic control for plant startup is feasible. This paper presents an advanced control system design for startup of the Experimental Breeder Reactor-2 (EBR-2) located at Idaho Falls, Idaho. The design incorporates recent methods in nonlinear control with advanced diagnostics techniques such as neural networks to form an integrated architecture. The preliminary evaluations are obtained in a simulated environment by a low-order, valid nonlinear model. Within the framework of phase 1 research, the design includes an inverse dynamics controller, a fuzzy controller, and an artificial neural network controller. These three nonlinear control modules are designed to follow the EBR-2 startup trajectories in a multi-input/output regime. They are coordinated by a supervisory routine to yield a fault-tolerant, parallel operation. The control system operates in three modes: manual, semiautomatic, and fully automatic control. The simulation results of the EBR-2 startup transients proved the effectiveness of the advanced concepts. The work presented in this paper is a preliminary feasibility analysis and does not constitute a final design of an automated startup control system for EBR-2. 14 refs., 43 figs.

  5. DIissolution of low enriched uranium from the experimental breeder reactor-II fuel stored at the Idaho National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Rudisill, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Almond, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); O' Rourke, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-28

    The Idaho National Laboratory (INL) is actively engaged in the development of electrochemical processing technology for the treatment of fast reactor fuels using irradiated fuel from the Experimental Breeder Reactor-II (EBR-II) as the primary test material. The research and development (R&D) activities generate a low enriched uranium (LEU) metal product from the electrorefining of the EBR-II fuel and the subsequent consolidation and removal of chloride salts by the cathode processor. The LEU metal ingots from past R&D activities are currently stored at INL awaiting disposition. One potential disposition pathway is the shipment of the ingots to the Savannah River Site (SRS) for dissolution in H-Canyon. Carbon steel cans containing the LEU metal would be loaded into reusable charging bundles in the H-Canyon Crane Maintenance Area and charged to the 6.4D or 6.1D dissolver. The LEU dissolution would be accomplished as the final charge in a dissolver batch (following the dissolution of multiple charges of spent nuclear fuel (SNF)). The solution would then be purified and the 235U enrichment downblended to allow use of the U in commercial reactor fuel. To support this potential disposition path, the Savannah River National Laboratory (SRNL) developed a dissolution flowsheet for the LEU using samples of the material received from INL.

  6. Investigation of molten salt fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kubota, Kenichi; Enuma, Yasuhiro; Tanaka, Yoshihiko; Konomura, Mamoru; Ichimiya, Masakazu [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    2000-06-01

    Phase I of Feasibility Studies on Commercialized Fast Reactor System is being performed for two years from Japanese Fiscal Year 1999. In this report, results of the study on fluid fuel reactors (especially a molten salt fast breeder reactor concept) are described from the viewpoint of technical and economical concerns of the plant system design. In JFY1999, we have started to investigate the fluid fuel reactors as alternative concepts of sodium cooled FBR systems with MOX fuel, and selected the unique concept of a molten chloride fast breeder reactor, whose U-Pu fuel cycle can be related to both light water reactors and fast breeder reactors on the basis of present technical data and design experiences. We selected a preliminary composition of molten fuel and conceptual plant design through evaluation of technical and economical issues essential for the molten salt reactors and then compared them with reference design concepts of sodium cooled FBR systems under limited information on the molten chloride fast breeder reactors. The following results were obtained. (1) The molten chloride fast breeder reactors have inherent safety features in the core and plant performances, ad the fluid fuel is quite promising for cost reduction of the fuel fabrication and reprocessing. (2) On the other hand, the inventory of the molten chloride fuel becomes high and thermal conductivity of the coolant is inferior compared to those of sodium cooled FBR systems, then, the size of main components such as IHX's becomes larger and the amount of construction materials is seems to be increased. (3) Furthermore economical vessel and piping materials which contact with the molten chloride salts are required to be developed. From the results, it is concluded that further steps to investigate the molten chloride fast breeder reactor concepts are too early to be conducted. (author)

  7. Automated operator procedure prompting for startup of Experimental Breeder Reactor-2

    Energy Technology Data Exchange (ETDEWEB)

    Renshaw, A.W.; Ball, S.J.; Ford, C.E.

    1990-11-01

    This report describes the development of an operator procedure prompting aid for startup of a nuclear reactor. This operator aid is a preliminary design for a similar aid that eventually will be used with the Advanced Liquid Metal Reactor (ALMR) presently in the design stage. Two approaches were used to develop this operator procedure prompting aid. One method uses an expert system software shell, and the other method uses database software. The preliminary requirements strongly pointed toward features traditionally associated with both database and expert systems software. Database software usually provides data manipulation flexibility and user interface tools, and expert systems tools offer sophisticated data representation and reasoning capabilities. Both methods, including software and associated hardware, are described in this report. Proposals for future enhancements to improve the expert system approach to procedure prompting and for developing other operator aids are also offered. 25 refs., 14 figs.

  8. Experimental Breeder Reactor II (EBR-II) Fuel-Performance Test Facility (FPTF)

    Energy Technology Data Exchange (ETDEWEB)

    Pardini, J.A.; Brubaker, R.C.; Veith, D.J.; Giorgis, G.C.; Walker, D.E.; Seim, O.S.

    1982-01-01

    The Fuel-Performance Test Facility (FPTF) is the latest in a series of special EBR-II instrumented in-core test facilities. A flow control valve in the facility is programmed to vary the coolant flow, and thus the temperature, in an experimental-irradiation subassembly beneath it and coupled to it. In this way, thermal transients can be simulated in that subassembly without changing the temperatures in surrounding subassemblies. The FPTF also monitors sodium flow and temperature, and detects delayed neutrons in the sodium effluent from the experimental-irradiation subassembly beneath it. This facility also has an acoustical detector (high-temperature microphone) for detecting sodium boiling.

  9. Analysis of UF6 breeder reactor power plants

    Science.gov (United States)

    Clement, J. D.; Rust, J. H.

    1976-01-01

    Gaseous UF6 fueled breeder reactor design and technical applications of such concepts are summarized. Special attention was given to application in nuclear power plants and to reactor efficiency and safety factors.

  10. Feasibility of processing the experimental breeder reactor-II driver fuel from the Idaho National Laboratory through Savannah River Site's H-Canyon facility

    Energy Technology Data Exchange (ETDEWEB)

    Magoulas, V. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-07-28

    Savannah River National Laboratory (SRNL) was requested to evaluate the potential to receive and process the Idaho National Laboratory (INL) uranium (U) recovered from the Experimental Breeder Reactor II (EBR-II) driver fuel through the Savannah River Site’s (SRS) H-Canyon as a way to disposition the material. INL recovers the uranium from the sodium bonded metallic fuel irradiated in the EBR-II reactor using an electrorefining process. There were two compositions of EBR-II driver fuel. The early generation fuel was U-5Fs, which consisted of 95% U metal alloyed with 5% noble metal elements “fissium” (2.5% molybdenum, 2.0% ruthenium, 0.3% rhodium, 0.1% palladium, and 0.1% zirconium), while the later generation was U-10Zr which was 90% U metal alloyed with 10% zirconium. A potential concern during the H-Canyon nitric acid dissolution process of the U metal containing zirconium (Zr) is the explosive behavior that has been reported for alloys of these materials. For this reason, this evaluation was focused on the ability to process the lower Zr content materials, the U-5Fs material.

  11. Conceptual design of Indian molten salt breeder reactor

    Indian Academy of Sciences (India)

    2015-08-28

    Aug 28, 2015 ... Home; Journals; Pramana – Journal of Physics; Volume 85; Issue 3. Conceptual design of Indian molten salt breeder ... India has recently started carrying out fundamental studies so as to arrive at a conceptual design of Indian molten salt breeder reactor (IMSBR). Presently, various design options and ...

  12. Exploding the myths about the fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Burns, S.

    1979-01-01

    This paper discusses the facts and figures about the effects of conservation policies, the benefits of the Clinch River Breeder Reactor demonstration plant, the feasibility of nuclear weapons manufacture from reactor-grade plutonium, diversion of plutonium from nuclear plants, radioactive waste disposal, and the toxicity of plutonium. The paper concludes that the U.S. is not proceeding with a high confidence strategy for breeder development because of a variety of false assumptions.

  13. Dynamics and control of molten-salt breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sing, Vikram; Lish, Matthew R.; Chvala, Ondrej; Upadhyaya, Belle R. [Dept. of Nuclear Engineering, University of Tennessee, Knoxville (United States)

    2017-08-15

    Preliminary results of the dynamic analysis of a two-fluid molten-salt breeder reactor (MSBR) system are presented. Based on an earlier work on the preliminary dynamic model of the concept, the model presented here is nonlinear and has been revised to accurately reflect the design exemplified in ORNL-4528. A brief overview of the model followed by results from simulations performed to validate the model is presented. Simulations illustrate stable behavior of the reactor dynamics and temperature feedback effects to reactivity excursions. Stable and smooth changes at various nodal temperatures are also observed. Control strategies for molten-salt reactor operation are discussed, followed by an illustration of the open-loop load-following capability of the molten-salt breeder reactor system. It is observed that the molten-salt breeder reactor system exhibits “self-regulating” behavior, minimizing the need for external controller action for load-following maneuvers.

  14. Water cooled breeder program summary report (LWBR (Light Water Breeder Reactor) development program)

    Energy Technology Data Exchange (ETDEWEB)

    1987-10-01

    The purpose of the Department of Energy Water Cooled Breeder Program was to demonstrate pratical breeding in a uranium-233/thorium fueled core while producing electrical energy in a commercial water reactor generating station. A demonstration Light Water Breeder Reactor (LWBR) was successfully operated for more than 29,000 effective full power hours in the Shippingport Atomic Power Station. The reactor operated with an availability factor of 76% and had a gross electrical output of 2,128,943,470 kilowatt hours. Following operation, the expended core was examined and no evidence of any fuel element defects was found. Nondestructive assay of 524 fuel rods determined that 1.39 percent more fissile fuel was present at the end of core life than at the beginning, proving that breeding had occurred. This demonstrates the existence of a vast source of electrical energy using plentiful domestic thorium potentially capable of supplying the entire national need for many centuries. To build on the successful design and operation of the Shippingport Breeder Core and to provide the technology to implement this concept, several reactor designs of large breeders and prebreeders were developed for commercial-sized plants of 900--1000 Mw(e) net. This report summarizes the Water Cooled Breeder Program from its inception in 1965 to its completion in 1987. Four hundred thirty-six technical reports are referenced which document the work conducted as part of this program. This work demonstrated that the Light Water Breeder Reactor is a viable alternative as a PWR replacement in the next generation of nuclear reactors. This transition would only require a minimum of change in design and fabrication of the reactor and operation of the plant.

  15. ORNL breeder reactor safety quarterly technical progress report, July-September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Fontana, M H; Wantland, J L

    1981-01-01

    Six tasks are reported upon: THORS (Thermal-Hydraulic Out-of-Reactor Safety) program, environmental assessment of alternate FBR fuels, model evaluation of breeder reactor radioactivity releases, nuclear safety information center activities, breeder reactor reliability data analysis center activities, and central data base for breeder reactor safety codes. (DLC)

  16. Development of fuels and structural materials for fast breeder reactors

    Indian Academy of Sciences (India)

    Fast breeder reactors (FBRs) are destined to play a crucial role inthe Indian nuclear power programme in the foreseeable future. FBR technology involves a multi-disciplinary approach to solve the various challenges in the areas of fuel and materials development. Fuels for FBRs have significantly higher concentration of ...

  17. Fission-suppressed hybrid reactor: the fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Coops, M.S.

    1982-12-01

    Results of a conceptual design study of a /sup 233/U-producing fusion breeder are presented. The majority of the study was devoted to conceptual design and evaluation of a fission-suppressed blanket and to fuel cycle issues such as fuel reprocessing, fuel handling, and fuel management. Studies in the areas of fusion engineering, reactor safety, and economics were also performed.

  18. Fuel Summary Report: Shippingport Light Water Breeder Reactor - Rev. 2

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Gail Lynn; Mc Cardell, Richard Keith; Illum, Douglas Brent

    2002-09-01

    The Shippingport Light Water Breeder Reactor (LWBR) was developed by Bettis Atomic Power Laboratory to demonstrate the potential of a water-cooled, thorium oxide fuel cycle breeder reactor. The LWBR core operated from 1977-82 without major incident. The fuel and fuel components suffered minimal damage during operation, and the reactor testing was deemed successful. Extensive destructive and nondestructive postirradiation examinations confirmed that the fuel was in good condition with minimal amounts of cladding deformities and fuel pellet cracks. Fuel was placed in wet storage upon arrival at the Expended Core Facility, then dried and sent to the Idaho Nuclear Technology and Engineering Center for underground dry storage. It is likely that the fuel remains in good condition at its current underground dry storage location at the Idaho Nuclear Technology and Engineering Center. Reports show no indication of damage to the core associated with shipping, loading, or storage.

  19. Molten Salt Breeder Reactor Analysis Methods

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jinsu; Jeong, Yongjin; Lee, Deokjung [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2015-05-15

    Utilizing the uranium-thorium fuel cycle shows considerable potential for the possibility of MSR. The concept of MSBR should be revised because of molten salt reactor's advantage such as outstanding neutron economy, possibility of continuous online reprocessing and refueling, a high level of inherent safety, and economic benefit by keeping off the fuel fabrication process. For the development of MSR research, this paper provides the MSBR single-cell, two-cell and whole core model for computer code input, and several calculation results including depletion calculation of each models. The calculations are carried out by using MCNP6, a Monte Carlo computer code, which has CINDER90 for depletion calculation using ENDF-VII nuclear data. From the calculation results of various reactor design parameters, the temperature coefficients are all negative at the initial state and MTC becomes positive at the equilibrium state. From the results of core rod worth, the graphite control rod alone cannot makes the core subcritical at initial state. But the equilibrium state, the core can be made subcritical state only by graphite control rods. Through the comparison of the results of each models, the two-cell method can represent the MSBR core model more accurately with a little more computational resources than the single-cell method. Many of the thermal spectrum MSR have adopted a multi-region single-fluid strategy.

  20. Fuel Summary Report: Shippingport Light Water Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Illum, D.B.; Olson, G.L.; McCardell, R.K.

    1999-01-01

    The Shippingport Light Water Breeder Reactor (LWBR) was a small water cooled, U-233/Th-232 cycle breeder reactor developed by the Pittsburgh Naval Reactors to improve utilization of the nation's nuclear fuel resources in light water reactors. The LWBR was operated at Shippingport Atomic Power Station (APS), which was a Department of Energy (DOE) (formerly Atomic Energy Commission)-owned reactor plant. Shippingport APS was the first large-scale, central-station nuclear power plant in the United States and the first plant of such size in the world operated solely to produce electric power. The Shippingport LWBR was operated successfully from 1977 to 1982 at the APS. During the five years of operation, the LWBR generated more than 29,000 effective full power hours (EFPH) of energy. After final shutdown, the 39 core modules of the LWBR were shipped to the Expended Core Facility (ECF) at Naval Reactors Facility at the Idaho National Engineering and Environmental Laboratory (INEEL). At ECF, 12 of the 39 modules were dismantled and about 1000 of more than 17,000 rods were removed from the modules of proof-of-breeding and fuel performance testing. Some of the removed rods were kept at ECF, some were sent to Argonne National Laboratory-West (ANL-W) in Idaho and some to ANL-East in Chicago for a variety of physical, chemical and radiological examinations. All rods and rod sections remaining after the experiments were shipped back to ECF, where modules and loose rods were repackaged in liners for dry storage. In a series of shipments, the liners were transported from ECF to Idaho Nuclear Technology Engineering Center (INTEC), formerly the Idaho Chemical Processing Plant (ICPP). The 47 liners containing the fully-rodded and partially-derodded core modules, the loose rods, and the rod scraps, are now stored in underground dry wells at CPP-749.

  1. Towards an intrinsically safe and economic thorium breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jagannathan, V. [Light Water Reactor Physics Section, Reactor Physics Design Division, Bhabha Atomic Research Centre, 5th Floor, Central Complex, Mumbai 400085 (India)]. E-mail: vjagan@magnum.barc.ernet.in; Pal, Usha [Light Water Reactor Physics Section, Reactor Physics Design Division, Bhabha Atomic Research Centre, 5th Floor, Central Complex, Mumbai 400085 (India)

    2006-10-15

    Thorium does not have intrinsic fissile content unlike uranium. {sup 232}Th has nearly three times thermal absorption cross section compared to {sup 238}U and hence requires much larger externally fed fissile content compared to uranium based fuel. These factors give a permanent economic competitive edge to uranium. Thus thorium is not inducted in any significant measure in present day power reactors, despite the fact that thorium is three times more abundant in the earth's crust than uranium. Uranium reserves vary from country to country and there is also difficulty in having equitable distribution of uranium. Thus when {sup 235}U would get exhausted, perhaps much sooner in countries having limited uranium reserve, there will be a need to switch over from the today's open fuel cycle programme based on {sup 235}U feed to closed fuel cycle based on Pu feed. At that stage thorium and (depleted) uranium would become equal candidates to form the fertile base. All economic considerations would have to be readdressed. The size and growth of the nuclear power programme based on closed fuel cycle would be dependent on maximizing the fissile conversion rate in those reactors. In this paper we reemphasize the principles and the details of the thermal reactor concept 'A Thorium Breeder Reactor' (ATBR), in which the use of PuO{sub 2} seeded thoria fuel is found to give excellent core characteristics like two years cycle length with nearly zero control maneuvers, fairly high seed output to input ratio and intrinsically safe reactivity coefficients [Jagannathan V, Ganesan S, Karthikeyan R. Sensitivity studies for a thorium breeder reactor design with the nuclear data libraries of WIMS library update project. In: Proceedings of the international conference on emerging nuclear energy systems ICENES-2000, September 25-28, 2000, Petten, The Netherlands].

  2. Interim Report on Fluid-Fuel Thermal Breeder Reactors

    Energy Technology Data Exchange (ETDEWEB)

    MacPherson, H. G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Alexander, L. G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Carter, W. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chapman, R. H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kinyon, B. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Miller, J. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    1960-03-15

    The merits of aqueous-homogeneous {AHBR), graphite-moderated molten salt (MSBR) , and graphite-moderated liquid-bismuth (LBBR) breeder reactors operated at nearly comparable fuel-cycle costs (~1.5 mills/kwhr) were evaluated. The net electrical plant capability was assumed to be 1000 MwE, and the fuel and fertile streams were processed continuously on-site. The specific powers based on fuel were 1.2, 1.2, and 0.5 MwE/kg respectively, and 5.9, 3.7, and 5.3 MwE/tonne based on thorium. Net breeding ratios were 1.10, 1.07, and 1.07, giving doubling times of 5-1/2, 11, and 25 full power years . The fuel-cycle costs at the design points selected were 1.4, 1.3, and 1.6 mills/kwhr . The AHBR has an advantage in breeding ratio and doubling time because D2O is superior to graphite as a moderator in breeder reactors. MSBR has an advantage in fuel-cycle costs and in inventory of uranium in the fertile stream as a result of using a solution blanket.

  3. Multiple recycling of fuel in prototype fast breeder reactor in a closed ...

    Indian Academy of Sciences (India)

    Abstract. A fast breeder reactor (FBR) closed fuel cycle involves recycling of the discharged fuel, after reprocessing and refabrication, in order to utilize the unburnt fuel and the bred fissile material. Our previous study in this regard for the prototype fast breeder reactor (PFBR) indicated the possibility of multiple recycling with ...

  4. Multiple recycling of fuel in prototype fast breeder reactor in a closed ...

    Indian Academy of Sciences (India)

    A fast breeder reactor (FBR) closed fuel cycle involves recycling of the discharged fuel, after reprocessing and refabrication, in order to utilize the unburnt fuel and the bred fissile material. Our previous study in this regard for the prototype fast breeder reactor (PFBR) indicated the possibility of multiple recycling with ...

  5. Immediate relation of ING to fast breeder reactor programs

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, W.B

    1969-07-01

    The future large-scale use of nuclear energy is linked in the United States and other major countries to their fast breeder reactor development. Very serious basic problems have been discovered within the last two years, limiting the life in the high fast neutron flux at appropriate temperatures of materials, in particular of metals suitable for fuel cladding in sodium coolant. There is therefore a most urgent need for materials testing facilities under controlled conditions of temperature and neutron flux at sufficiently high ratings to match or surpass those required in commercially competitive fast breeder reactors. None of the test facilities yet planned for 1976 or sooner in the western world appears to match these conditions. The problem is mainly the difficulty of providing the high neutron flux effectively continuously. The spallation reaction in heavy elements was chosen as the basis of ING - the intense neutron generator, because it is the only known reaction that promises a fast neutron source density that is higher than can be controlled from the fission process. It is suggested that several countries will wish to consider urgently whether they should also explore the spallation reaction for the purpose of a fast neutron irradiation test facility. In view of the discontinuance of the ING project in Canada a favourable opportunity will exist over the next few months 10 obtain from Canada by direct personal contact details of the significant study that has been carried on for ING over the last five years. In the event that satisfactory materials are established within the lifetime of the spallation facilities they may continue to be used for the production of selected isotopes more profitably produced in high neutron fluxes. The facilities may be also used for the desirable preirradiation of thorium reactor fuel. The other research purposes planned for ING could also be served. (author)

  6. Designing a SCADA system simulator for fast breeder reactor

    Science.gov (United States)

    Nugraha, E.; Abdullah, A. G.; Hakim, D. L.

    2016-04-01

    SCADA (Supervisory Control and Data Acquisition) system simulator is a Human Machine Interface-based software that is able to visualize the process of a plant. This study describes the results of the process of designing a SCADA system simulator that aims to facilitate the operator in monitoring, controlling, handling the alarm, accessing historical data and historical trend in Nuclear Power Plant (NPP) type Fast Breeder Reactor (FBR). This research used simulation to simulate NPP type FBR Kalpakkam in India. This simulator was developed using Wonderware Intouch software 10 and is equipped with main menu, plant overview, area graphics, control display, set point display, alarm system, real-time trending, historical trending and security system. This simulator can properly simulate the principle of energy flow and energy conversion process on NPP type FBR. This SCADA system simulator can be used as training media for NPP type FBR prospective operators.

  7. Accident analysis of heavy water cooled thorium breeder reactor

    Science.gov (United States)

    Yulianti, Yanti; Su'ud, Zaki; Takaki, Naoyuki

    2015-04-01

    Thorium has lately attracted considerable attention because it is accumulating as a by-product of large scale rare earth mining. The objective of research is to analyze transient behavior of a heavy water cooled thorium breeder that is designed by Tokai University and Tokyo Institute of Technology. That is oxide fueled, PWR type reactor with heavy water as primary coolant. An example of the optimized core has relatively small moderator to fuel volume ratio (MFR) of 0.6 and the characteristics of the core are burn-up of 67 GWd/t, breeding ratio of 1.08, burn-up reactivity loss during cycles of fuel and claddings during accident are still below limitations which are in secure condition.

  8. Comparative assessment of nuclear fuel cycles. Light-water reactor once-through, classical fast breeder reactor, and symbiotic fast breeder reactor cycles

    Energy Technology Data Exchange (ETDEWEB)

    Hardie, R.W.; Barrett, R.J.; Freiwald, J.G.

    1980-06-01

    The object of the Alternative Nuclear Fuel Cycle Study is to perform comparative assessments of nuclear power systems. There are two important features of this study. First, this evaluation attempts to encompass the complete, integrated fuel cycle from mining of uranium ore to disposal of waste rather than isolated components. Second, it compares several aspects of each cycle - energy use, economics, technological status, proliferation, public safety, and commercial potential - instead of concentrating on one or two assessment areas. This report presents assessment results for three fuel cycles. These are the light-water reactor once-through cycle, the fast breeder reactor on the classical plutonium cycle, and the fast breeder reactor on a symbiotic cycle using plutonium and /sup 233/U as fissile fuels. The report also contains a description of the methodology used in this assessment. Subsequent reports will present results for additional fuel cycles.

  9. IAEA coordinated research program on `harmonization and validation of fast reactor thermomechanical and thermohydraulic codes using experimental data`. 1. Thermohydraulic benchmark analysis on high-cycle thermal fatigue events occurred at French fast breeder reactor Phenix

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, Toshiharu [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1997-06-01

    A benchmark exercise on `Tee junction of Liquid Metal Fast Reactor (LMFR) secondary circuit` was proposed by France in the scope of the said Coordinated Research Program (CRP) via International Atomic Energy Agency (IAEA). The physical phenomenon chosen here deals with the mixture of two flows of different temperature. In a LMFR, several areas of the reactor are submitted to this problem. They are often difficult to design, because of the complexity of the phenomena involved. This is one of the major problems of the LMFRs. This problem has been encountered in the Phenix reactor on the secondary loop, where defects in a tee junction zone were detected during a campaign of inspections after an operation of 90,000 hours of the reactor. The present benchmark is based on an industrial problem and deal with thermal striping phenomena. Problems on pipes induced by thermal striping phenomena have been observed in some reactors and experimental facilities coolant circuits. This report presents numerical results on thermohydraulic characteristics of the benchmark problem, carried out using a direct numerical simulation code DINUS-3 and a boundary element code BEMSET. From the analysis with both the codes, it was confirmed that the hot sodium from the small pipe rise into the cold sodium of the main pipe with thermally instabilities. Furthermore, it was indicated that the coolant mixing region including the instabilities agrees approximately with the result by eye inspections. (author)

  10. An Evaluation of liquid metal leak detection methods for the Clinch River Breeder Reactor Plant

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.J.; Doctor, S.R.

    1977-12-01

    This report documents an independent review and evaluation of sodium leak detection methods described in the Clinch River Breeder Reactor Preliminary Safety Analysis Report. Only information in publicly available documents was used in making the assessments.

  11. Decision analysis of the Liquid Metal Fast Breeder Reactor program

    Energy Technology Data Exchange (ETDEWEB)

    Seim, E.H.

    1983-01-01

    The decision-analysis methodology is employed to develop a model to examine the Liquid Metal Fast Breeder Reactor Program to provide guidance for US decision makers. Information relative to the nuclear fuel cycle, the decision analysis technique, and the supporting economic theory is provided for background purposes. The model consists of four courses of action, three decision times, and five critical factors with either two or three paths leading to 198 possible end results. The courses of action cover a range of the possible programs to develop a commercial LMFBR including scale-up, program timing, and plant schedules. Data developed from a number of recent studies along with probability assignments from three sources are run through the model and indicate that course of action one (Compressed Full Program) produces the greatest net benefits discounted to a present value at a real rate of 5%. An analysis is included to consider the foregone costs of coal usage for electrical generation when LMFBR capacity could be available. Ranking of the courses of action does not change compared to the analysis without foregone costs. The foregone costs are approximately five times greater than the LMFBR benefits alone. Recommendations for specific actions by decision makers conclude the study.

  12. Installation of the Light-Water Breeder Reactor at the Shippingport Atomic Power Station (LWBR Development Program)

    Energy Technology Data Exchange (ETDEWEB)

    Massimino, R.J.; Williams, D.A.

    1983-05-01

    This report summarizes the refueling operations performed to install a Light Water Breeder Reactor (LWBR) core into the existing pressurized water reactor vessel at the Shippingport Atomic Power Station. Detailed descriptions of the major installation operations (e.g., primary system preconditioning, fuel installation, pressure boundary seal welding) are included as appendices to this report; these operations are of technical interest to any reactor servicing operation, whether the reactor is a breeder or a conventional light water non-breeder core.

  13. Instrumentation and control system for the prototype fast breeder reactor 'MONJU' power station

    Energy Technology Data Exchange (ETDEWEB)

    Hara, Hiroshi (Power Reactor and Nuclear Fuel Development Corp., Tokyo (Japan)); Mae, Yoshinori; Ishida, Takayuki; Hashiura, Kazuhiko; Kasai, Shozo; Yamamoto, Hajime

    1989-10-01

    The fast breeder reactor 'Monju' power station is constructed as the nuclear power station of next generation in Tsuruga City, Fukui Prefecture. In order to realize high safety and operational reliability as the newest nuclear power station, the measurement and control system of Monju (electric power output 280 MW) has been designed and manufactured by reflecting the experiences of construction and operation of the experimental FBR 'Joyo' and the results of various research and development of sodium instrumentation and others, and by using the latest digital control technology and multiplexing system technology. In this paper, the results of development of the characteristic measurement and control technology as fast breeder reactors and the state of application to the measurement and control system which was designed and manufactured for Monju are described. Central monitoring panel, plant control system, sodium instrumentation, preheating control system and so on are reported. In the case of Monju, the heat capacity and thermal inertia of the primary and secondary cooling systems are large, and the system comprises three loops. (K.I.).

  14. Training experience at Experimental Breeder Reactor II

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, J.W.; McCormick, R.P.; McCreery, H.I.

    1978-01-01

    The EBR-II Training Group develops, maintains,and oversees training programs and activities associated with the EBR-II Project. The group originally spent all its time on EBR-II plant-operations training, but has gradually spread its work into other areas. These other areas of training now include mechanical maintenance, fuel manufacturing facility, instrumentation and control, fissile fuel handling, and emergency activities. This report describes each of the programs and gives a statistical breakdown of the time spent by the Training Group for each program. The major training programs for the EBR-II Project are presented by multimedia methods at a pace controlled by the student. The Training Group has much experience in the use of audio-visual techniques and equipment, including video-tapes, 35 mm slides, Super 8 and 16 mm film, models, and filmstrips. The effectiveness of these techniques is evaluated in this report.

  15. Compendium of computer codes for the safety analysis of fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    1977-10-01

    The objective of the compendium is to provide the reader with a guide which briefly describes many of the computer codes used for liquid metal fast breeder reactor safety analyses, since it is for this system that most of the codes have been developed. The compendium is designed to address the following frequently asked questions from individuals in licensing and research and development activities: (1) What does the code do. (2) To what safety problems has it been applied. (3) What are the code's limitations. (4) What is being done to remove these limitations. (5) How does the code compare with experimental observations and other code predictions. (6) What reference documents are available.

  16. Multiple recycling of fuel in prototype fast breeder reactor

    Indian Academy of Sciences (India)

    In the FBR closed fuel cycle, possibility of multi-recycle has been recognized. In the present study, Pu-239 equivalence approach is used to demonstrate the feasibility of achieving near constant input inventory of Pu and near stable Pu isotopic composition after a few recycles of the same fuel of the prototype fast breeder ...

  17. Acoustic monitoring of sodium boiling in a liquid metal fast breeder reactor from autoregressive models

    Energy Technology Data Exchange (ETDEWEB)

    Geraldo, Issa Cherif [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Bose, Tanmoy [Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal (India); Pekpe, Komi Midzodzi, E-mail: midzodzi.pekpe@univ-lille1.fr [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Cassar, Jean-Philippe [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Mohanty, A.R. [Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal (India); Paumel, Kévin [CEA, DEN, Nuclear Technology Department, F-13108 Saint-Paul-lez-Durance (France)

    2014-10-15

    Highlights: • The work deals with sodium boiling detection in a liquid metal fast breeder reactor. • The authors choose to use acoustic data instead of thermal data. • The method is designed to not to be disturbed by the environment noises. • A real time boiling detection methods are proposed in the paper. - Abstract: This paper deals with acoustic monitoring of sodium boiling in a liquid metal fast breeder reactor (LMFBR) based on auto regressive (AR) models which have low computational complexities. Some authors have used AR models for sodium boiling or sodium–water reaction detection. These works are based on the characterization of the difference between fault free condition and current functioning of the system. However, even in absence of faults, it is possible to observe a change in the AR models due to the change of operating mode of the LMFBR. This sets up the delicate problem of how to distinguish a change in operating mode in absence of faults and a change due to presence of faults. In this paper we propose a new approach for boiling detection based on the estimation of AR models on sliding windows. Afterwards, classification of the models into boiling or non-boiling models is made by comparing their coefficients by two statistical methods, multiple linear regression (LR) and support vectors machines (SVM). The proposed approach takes into account operating mode information in order to avoid false alarms. Experimental data include non-boiling background noise data collected from Phenix power plant (France) and provided by the CEA (Commissariat à l’Energie Atomique et aux énergies alternatives, France) and boiling condition data generated in laboratory. High boiling detection rates as well as low false alarms rates obtained on these experimental data show that the proposed method is efficient for boiling detection. Most importantly, it shows that the boiling phenomenon introduces a disturbance into the AR models that can be clearly detected.

  18. Cellular convection in vertical annuli of fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hemanath, M.G. [Fast Reactor Technology Group, Indira Gandhi Center for Atomic Research, Kalpakkam (India)], E-mail: hemanath@igcar.gov.in; Meikandamurthy, C.; Ramakrishnan, V.; Rajan, K.K.; Rajan, M.; Vaidyanathan, G. [Fast Reactor Technology Group, Indira Gandhi Center for Atomic Research, Kalpakkam (India)

    2007-08-15

    In the pool type fast reactors the roof structure is penetrated by a number of pumps and heat exchangers that are cylindrical in shape. Sandwiched between the free surface of sodium and the roof structure, is stagnant argon gas, which can flow in the annular space between the components and roof structure, as a thermosyphon. These thermosyphons not only transport heat from sodium to roof structure, but also result in cellular convection in vertical annuli resulting in circumferential temperature asymmetry of the penetrating components. There is need to know the temperature asymmetry as it can cause tilting of the components. Experiments were carried out in an annulus model to predict the circumferential temperature difference with and without sodium in the test vessel. Three-dimensional analysis was also carried out using PHOENICS CFD code and compared with the experiment. This paper describes the experimental details, the theoretical analysis and their comparison.

  19. Status of EC solid breeder blanket designs and R and D for demo fusion reactors

    Energy Technology Data Exchange (ETDEWEB)

    Proust, E. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Dept. de Mecanique et de Technologie; Dalle Donne, M. [Kernforschungszentrum Karlsruhe GmbH (Germany); Anzidei, L. [ENEA, Frascati (Italy). Centro Ricerche Energia; Kwast, H. [Netherlands Energy Research Foundation (ECN), Petten (Netherlands); Moons, F. [Centre d`Etude de l`Energie Nucleaire, Mol (Belgium)

    1994-12-31

    Within the European Community Fusion Technology Program two solid breeder blankets for a DEMO reactor are being developed. The two blankets have various features in common: helium as coolant and as tritium purge gas, the martensitic steel MANET as structural material and beryllium as neutron multiplier. The configurations of the two blankets are however different: in the B.I.T. (Breeder Inside Tube) concept the breeder materials are LiAlO{sub 2} or Li{sub 2}ZrO{sub 3} in the form of annular pellets contained in tubes surrounded by beryllium blocks, the coolant helium being outside the tubes, whereas in the B.O.T. (Breeder out of Tube) the breeder and multiplier material are Li{sub 4}SiO{sub 4} and beryllium pebbles forming a mixed bed placed outside the tubes containing the coolant helium. The main critical issues for both blankets are the behavior of the breeder ceramics and of beryllium under irradiation and the tritium control. Other issues are the low temperature irradiation induced embrittlement of MANET, the mechanical effects caused by major plasma disruptions, and safety and reliability. The R and D work concentrate on these issues. The development of martensitic steels including MANET is part of a separate program. Breeder ceramics and beryllium irradiations have been so far performed for conditions which do not cover the peak values injected in the DEMO blankets. Further irradiations in thermal reactors and in fast reactors, especially for beryllium, are required. An effective tritium control requires the development of permeation barriers and/or of methods of oxidation of the tritium in the main helium cooling systems. First promising results have been obtained also in field of mechanical effects from plasma disruptions and safety and reliability, however further work is required in the reliability field and to validate the codes for the calculations of the plasma disruption effects. (authors). 8 figs., 2 tabs., 53 refs.

  20. Upgrading program of the experimental fast reactor Joyo

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, A.; Yogo, S. [Japan Nuclear Cycle Development Institute, Iibaraki-Ken (Japan)

    2001-07-01

    The experimental fast reactor Joyo finished its operation as an irradiation core in June, 2000. Throughout the operation of MK-I (breeder core) and MK-II (irradiation core), the net operation time has exceeded 60,000 hours. During these operations there were no fuel failures or serious plant problems. The MK-III modification program will improve irradiation capability to demonstrate advanced technologies for commercial Fast Breeder Reactor (FBR). When the MK-III core is started, it will support irradiation tests in feasibility studies for fast reactor and related fuel cycle research and development in Japan. (authors)

  1. Atoms in Appalachia. Historical report on the Clinch River Breeder Reactor site

    Energy Technology Data Exchange (ETDEWEB)

    Schaffer, D

    1982-01-01

    The background information concerning the acquisition of the land for siting the Clinch River Breeder Reactor is presented. Historical information is also presented concerning the land acquisition for the Oak Ridge facilities known as the Manhattan Project during World War II.

  2. Engineering review of the core support structure of the Gas Cooled Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-09-01

    The review of the core support structure of the gas cooled fast breeder reactor (GCFR) covered such areas as the design criteria, the design and analysis of the concepts, the development plan, and the projected manufacturing costs. Recommendations are provided to establish a basis for future work on the GCFR core support structure.

  3. Nuclear Engineering Computer Modules, Thermal-Hydraulics, TH-2: Liquid Metal Fast Breeder Reactors.

    Science.gov (United States)

    Reihman, Thomas C.

    This learning module is concerned with the temperature field, the heat transfer rates, and the coolant pressure drop in typical liquid metal fast breeder reactor (LMFBR) fuel assemblies. As in all of the modules of this series, emphasis is placed on developing the theory and demonstrating the use with a simplified model. The heart of the module is…

  4. Economic Assessment of Russian Nuclear Strategies on the Basis of Fast Breeder Reactors

    Directory of Open Access Journals (Sweden)

    O. V. Marchenko

    2013-01-01

    Full Text Available The paper assesses the economic risk caused by the delay in commissioning innovative nuclear power plants with fast breeder reactors in Russia. The risk is quantitatively measured by the excessive costs for energy development and the possibility of implementing the considered variants that differ in power consumption, technical and economic indices of the reactors, and constraints on CO2 emissions. The probability distribution functions of economic losses for different strategies of nuclear energy development are constructed.

  5. A FAST BREEDER REACTOR SPENT FUEL MEASUREMENTS PROGRAM FOR BN-350 REACTOR

    Energy Technology Data Exchange (ETDEWEB)

    P. STAPLES; J. HALBIG; ET AL

    1999-04-01

    A project to verify the fissile content of fast breeder reactor spent nuclear fuel is underway in the Republic of Kasakhstan. There are a variety of assembly types with different irradiation histories and profiles in the reactor that require a variety of measurement and analysis procedures. These procedures will be discussed and compared as will the general process that has been designed to resolve any potential measurement discrepancies. The underwater counter is part of a system that is designed to assist the International Atomic Energy Agency (IAEA) in maintaining continuity of knowledge from the time of measurement until the measured item is placed in a welded container with a unique identification. In addition to satisfying IAEA requirements for the spent nuclear fuel, this measurement program is able to satisfy some of the measurement requirements for the Kasakhstan Atomic Energy Agency concerning the repackaging of the spent nuclear fuel into a standard canister. The project is currently operational in a mode requiring the IAEA's continuous presence.

  6. Helium Leak Detection of Vessels in Fuel Transfer Cell (FTC) of Prototype Fast Breeder Reactor (PFBR)

    Science.gov (United States)

    Dutta, N. G.

    2012-11-01

    Bharatiya Nabhikiya Vidyut Nigam (BHAVINI) is engaged in construction of 500MW Prototype Fast Breeder Reactor (PFBR) at Kalpak am, Chennai. In this very important and prestigious national programme Special Product Division (SPD) of M/s Kay Bouvet Engg.pvt. ltd. (M/s KBEPL) Satara is contributing in a major way by supplying many important sub-assemblies like- Under Water trolley (UWT), Airlocks (PAL, EAL) Container and Storage Rack (CSR) Vessels in Fuel Transfer Cell (FTC) etc for PFBR. SPD of KBEPL caters to the requirements of Government departments like - Department of Atomic Energy (DAE), BARC, Defense, and Government undertakings like NPCIL, BHAVINI, BHEL etc. and other precision Heavy Engg. Industries. SPD is equipped with large size Horizontal Boring Machines, Vertical Boring Machines, Planno milling, Vertical Turret Lathe (VTL) & Radial drilling Machine, different types of welding machines etc. PFBR is 500 MWE sodium cooled pool type reactor in which energy is produced by fissions of mixed oxides of Uranium and Plutonium pellets by fast neutrons and it also breeds uranium by conversion of thorium, put along with fuel rod in the reactor. In the long run, the breeder reactor produces more fuel then it consumes. India has taken the lead to go ahead with Fast Breeder Reactor Programme to produce electricity primarily because India has large reserve of Thorium. To use Thorium as further fuel in future, thorium has to be converted in Uranium by PFBR Technology.

  7. Gas core reactors for actinide transmutation and breeder applications. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Clement, J.D.; Rust, J.H.

    1978-04-01

    This work consists of design power plant studies for four types of reactor systems: uranium plasma core breeder, uranium plasma core actinide transmuter, UF6 breeder and UF6 actinide transmuter. The plasma core systems can be coupled to MHD generators to obtain high efficiency electrical power generation. A 1074 MWt UF6 breeder reactor was designed with a breeding ratio of 1.002 to guard against diversion of fuel. Using molten salt technology and a superheated steam cycle, an efficiency of 39.2% was obtained for the plant and the U233 inventory in the core and heat exchangers was limited to 105 Kg. It was found that the UF6 reactor can produce high fluxes (10 to the 14th power n/sq cm-sec) necessary for efficient burnup of actinide. However, the buildup of fissile isotopes posed severe heat transfer problems. Therefore, the flux in the actinide region must be decreased with time. Consequently, only beginning-of-life conditions were considered for the power plant design. A 577 MWt UF6 actinide transmutation reactor power plant was designed to operate with 39.3% efficiency and 102 Kg of U233 in the core and heat exchanger for beginning-of-life conditions.

  8. Multiple recycling of fuel in prototype fast breeder reactor

    Indian Academy of Sciences (India)

    Abstract. In a thermal neutron reactor, multiple recycle of U–Pu fuel is not possible due to degradation of fissile content of Pu in just one recycle. In the FBR closed fuel cycle, possibility of multi-recycle has been recognized. In the present study, Pu-239 equivalence approach is used to demonstrate the feasibility of achieving ...

  9. Investigation of zero-release cycle using fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The task force was organized for the main purpose of offering quantitative basic data to the study group on nuclear fuel cycle in February, 1997. The effect of so-called frontier technologies such as the isotope separation by laser method, the FP annihilation with electron beam accelerators and so on in the FBR cycle based on MOX fuel and PUREX reprocessing method was expected. It is aimed at to recycle the total amount of minor actinides. The object of recycling is the nuclides which contribute largely to toxicity, namely 11 elements, 12 nuclides. The preconditions and the target to be attained of the investigation are explained. As the results of investigation, the amount of reloading MA and FP into a reactor, squeezing the recycling scenario, the effect of reducing toxicity and the subject of the countermeasures to the nuclides with long half-life which cannot be reloaded are reported. As the technical evaluation required for realizing the concept, the concept of the core which excludes recriticality, the advance of reprocessing technology, isotope separation, the fabrication into the optimal form for recycling and so on are discussed. The economical efficiency of the recycling based on MOX and PUREX and the proposal of the development scenario are described. (K.I.)

  10. Review of ORNL-TSF shielding experiments for the gas-cooled Fast Breeder Reactor Program

    Energy Technology Data Exchange (ETDEWEB)

    Abbott, L.S.; Ingersoll, D.T.; Muckenthaler, F.J.; Slater, C.O.

    1982-01-01

    During the period between 1975 and 1980 a series of experiments was performed at the ORNL Tower Shielding Facility in support of the shield design for a 300-MW(e) Gas Cooled Fast Breeder Demonstration Plant. This report reviews the experiments and calculations, which included studies of: (1) neutron streaming in the helium coolant passageways in the GCFR core; (2) the effectiveness of the shield designed to protect the reactor grid plate from radiation damage; (3) the adequacy of the radial shield in protecting the PCRV (prestressed concrete reactor vessel) from radiation damage; (4) neutron streaming between abutting sections of the radial shield; and (5) the effectiveness of the exit shield in reducing the neutron fluxes in the upper plenum region of the reactor.

  11. Preliminary design of a Binary Breeder Reactor; Diseno preliminar de un reactor esferico de quema/cria

    Energy Technology Data Exchange (ETDEWEB)

    Garcia C, E. Y.; Francois, J. L.; Lopez S, R. C., E-mail: eliasgarcerv@hotmail.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac No. 8532, 62550 Jiutepec, Morelos (Mexico)

    2014-10-15

    A binary breeder reactor (BBR) is a reactor that by means of the transmutation and fission process can operates through the depleted uranium burning with a small quantity of fissile material. The advantages of a BBR with relation to other nuclear reactor types are numerous, taking into account their capacity to operate for a long time without requiring fuel reload or re-arrangement. In this work four different simulations are shown carried out with the MCNPX code with libraries Jeff-3.1 to 1200 K. The objective of this study is to compare two different models of BBR: a spherical reactor and a cylindrical one, using two fuel cycles for each one of them (U-Pu and Th-U) and different reflectors for the two different geometries. For all the models a super-criticality state was obtained at least 10.9 years without carrying out some fuel re-arrangement or reload. The plutonium-239 production was achieved in the models where natural uranium was used in the breeding area, while the production of uranium-233 was observed in the cases where thorium was used in the fertile area. Finally, a behavior of stationary wave reactor was observed inside the models of spherical reactor when contemplating the power uniform increment in the breeding area, while inside the cylindrical models was observed the behavior of a traveling wave reactor when registering the displacement of the burnt wave along the cylindrical model. (Author)

  12. Large scale breeder reactor plant prototype mechanical pump conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    This final report is a complete conceptual design study of a mechanical pump for a large scale breeder reactor plant. The pumps are located in the cold leg side of the loops. This makes the net positive suction head available - NPSHA - low, and is, in fact, a major influencing factor in the design. Where possible, experience gained from the Clinch River Project and the FFTF is used in this study. Experience gained in the design, manufacturer, and testing of pumps in general and sodium pumps in particular is reflected in this report. The report includes estimated cost and time schedule for design, manufacture, and testing. It also includes a recommendation for development needs.

  13. Steam condenser optimization using Real-parameter Genetic Algorithm for Prototype Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jayalal, M.L., E-mail: jayalal@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Kumar, L. Satish, E-mail: satish@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Jehadeesan, R., E-mail: jeha@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Rajeswari, S., E-mail: raj@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Satya Murty, S.A.V., E-mail: satya@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Balasubramaniyan, V.; Chetal, S.C. [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India)

    2011-10-15

    Highlights: > We model design optimization of a vital reactor component using Genetic Algorithm. > Real-parameter Genetic Algorithm is used for steam condenser optimization study. > Comparison analysis done with various Genetic Algorithm related mechanisms. > The results obtained are validated with the reference study results. - Abstract: This work explores the use of Real-parameter Genetic Algorithm and analyses its performance in the steam condenser (or Circulating Water System) optimization study of a 500 MW fast breeder nuclear reactor. Choice of optimum design parameters for condenser for a power plant from among a large number of technically viable combination is a complex task. This is primarily due to the conflicting nature of the economic implications of the different system parameters for maximizing the capitalized profit. In order to find the optimum design parameters a Real-parameter Genetic Algorithm model is developed and applied. The results obtained are validated with the reference study results.

  14. Review of uncertainty estimates associated with models for assessing the impact of breeder reactor radioactivity releases

    Energy Technology Data Exchange (ETDEWEB)

    Miller, C.; Little, C.A.

    1982-08-01

    The purpose is to summarize estimates based on currently available data of the uncertainty associated with radiological assessment models. The models being examined herein are those recommended previously for use in breeder reactor assessments. Uncertainty estimates are presented for models of atmospheric and hydrologic transport, terrestrial and aquatic food-chain bioaccumulation, and internal and external dosimetry. Both long-term and short-term release conditions are discussed. The uncertainty estimates presented in this report indicate that, for many sites, generic models and representative parameter values may be used to calculate doses from annual average radionuclide releases when these calculated doses are on the order of one-tenth or less of a relevant dose limit. For short-term, accidental releases, especially those from breeder reactors located in sites dominated by complex terrain and/or coastal meteorology, the uncertainty in the dose calculations may be much larger than an order of magnitude. As a result, it may be necessary to incorporate site-specific information into the dose calculation under these circumstances to reduce this uncertainty. However, even using site-specific information, natural variability and the uncertainties in the dose conversion factor will likely result in an overall uncertainty of greater than an order of magnitude for predictions of dose or concentration in environmental media following shortterm releases.

  15. Optimization of material and production to develop fluoroelastomer inflatable seals for sodium cooled fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, N.K., E-mail: nksinha@igcar.gov.i [Indira Gandhi Centre for Atomic Research (IGCAR), Department of Atomic Energy (DAE), Kalpakkam, Tamilnadu 603102 (India); Raj, Baldev, E-mail: dir@igcar.gov.i [Indira Gandhi Centre for Atomic Research (IGCAR), Department of Atomic Energy (DAE), Kalpakkam, Tamilnadu 603102 (India)

    2011-03-15

    Research highlights: Production of thin fluoroelastomer profiles by cold feed extrusion and continuous cure involving microwave and hot air heating. Use of peroxide curing in air during production. Use of fluoroelastomers based on advanced polymer architecture (APA) for the production of profiles. Use of the profiles in inflatable seals for critical application of Prototype Fast Breeder Reactor. Tailoring of material formulation by synchronized optimization of material and production technologies to ensure that the produced seal ensures significant gains in terms of performance and safety in reactor under synergistic influences of temperature, radiation, air and sodium aerosol. - Abstract: The feasibility of producing thin-walled fluoroelastomer profiles under continuous, atmospheric-pressure vulcanization conditions in air has been demonstrated by successful manufacture of {approx}2 m diameter test inflatable seals for the 500 MWe, Prototype Fast Breeder Reactor (PFBR) using a 50/50 blend formulation of Viton GBL-200S/600S based on advanced polymer architecture (APA). A commercial cold feed screw extruder with 90 mm diameter screw was used along with continuous cure by microwave (2.45 GHz) and hot air heating (190 {sup o}C) at a line speed of 1 m/min to produce the seals. The blend formulation promises significant improvement in the performance and safety of the seals. This article depicts the relevant characteristics of the original inflatable seal compound that was used as reference to achieve the objectives through synchronized optimization of material and production technologies. The production trials are outlined and the blend formulation used with minor factory modifications to produce the test seals is reported. Progressive refinements of the original, Viton A-401C based compound to the blend formulation is presented along with an assessment of potential performance gains. Possible uses of the reported formulation and production technique for other large

  16. Passive compact molten salt reactor (PCMSR), modular thermal breeder reactor with totally passive safety system

    Science.gov (United States)

    Harto, Andang Widi

    2012-06-01

    Design Study Passive Compact Molten Salt Reactor (PCMSR) with totally passive safety system has been performed. The term of Compact in the PCMSR name means that the reactor system is designed to have relatively small volume per unit power output by using modular and integral concept. In term of modular, the reactor system consists of three modules, i.e. reactor module, turbine module and fuel management module. The reactor module is an integral design that consists of reactor, primary and intermediate heat exchangers and passive post shutdown cooling system. The turbine module is an integral design of a multi heating, multi cooling, regenerative gas turbine. The fuel management module consists of all equipments related to fuel preparation, fuel reprocessing and radioactive handling. The preliminary calculations show that the PCMSR has negative temperature and void reactivity coefficient, passive shutdown characteristic related to fuel pump failure and possibility of using natural circulation for post shutdown cooling system.

  17. Clinch River Breeder Reactor Plant Steam Generator Few Tube Test model post-test examination

    Energy Technology Data Exchange (ETDEWEB)

    Impellezzeri, J.R.; Camaret, T.L.; Friske, W.H.

    1981-03-11

    The Steam Generator Few Tube Test (FTT) was part of an extensive testing program carried out in support of the Clinch River Breeder Reactor Plant (CRBRP) steam generator design. The testing of full-length seven-tube evaporator and three-tube superheater models of the CRBRP design was conducted to provide steady-state thermal/hydraulic performance data to full power per tube and to verify the absence of multi-year endurance problems. This paper describes the problems encountered with the mechanical features of the FTT model design which led to premature test termination, and the results of the post-test examination. Conditions of tube bowing and significant tube and tube support gouging was observed. An interpretation of the visual and metallurgical observations is also presented. The CRBRP steam generator has undergone design evaluations to resolve observed deficiences found in the FFTM.

  18. A ceramic breeder in a poloidal tube blanket for a tokamak reactor

    Energy Technology Data Exchange (ETDEWEB)

    Amici, A.; Anzidei, L.; Gallina, M.; Rado, V.; Simbolotti, G.; Violante, V.; Zampaglione, V.; Petrizzi, L. (Associazione Euratom-CNEN sulla Fusione, Centro di Frascati (Italy))

    1989-04-01

    A conceptual study of a helium-cooled solid breeder blanket for a tokamak reactor is presented. Tritium breeding capability together with system reliability are taken as the main design criteria. The blanket consists of tubular poloidal modules made of a central bundle of ceramic rods ({gamma}LiAlO/sub 2/) with a coaxial distribution of the inlet/outlet coolant flow (He) surrounded by a multiplier material (Be) in the form of bored bricks. The Be to {gamma}LiAlO/sub 2/ volume ratio is 4/1. The He inlet and outlet branches are cooling Be and {gamma}LiAlO/sub 2/, respectively. A purge He flow running through small central holes of the ceramic rods is derived from the main flow. Under the typical conditions of a tokamak reactor (neutron wall load=2 MW/m/sup 2/), a full coverage tritium breeding ratio of 1.47 is achieved for the following design and operating parameters: outlet He temperature=570/sup 0/C; inlet He temperature=250/sup 0/; total extracted power=2700 MW; He pumping power percentage=2%; minimum/maximum {gamma}LiAlO/sub 2/ temperature=400/900/sup 0/C; maximum structural temperature=475/sup 0/C; and maximum Be temperature=525/sup 0/C. (orig.).

  19. Estimated recurrence frequencies for initiating accident categories associated with the Clinch River Breeder Reactor Plant design

    Energy Technology Data Exchange (ETDEWEB)

    Copus, E R

    1982-04-01

    Estimated recurrence frequencies for each of twenty-five generic LMFBR initiating accident categories were quantified using the Clinch River Breeder Reactor Plant (CRBRP) design. These estimates were obtained using simplified systems fault trees and functional event tree models from the Accident Delineation Study Phase I Final Report coupled with order-of-magnitude estimates for the initiator-dependent failure probabilities of the individual CRBRP engineered safety systems. Twelve distinct protected accident categories where SCRAM is assumed to be successful are estimated to occur at a combined rate of 10/sup -3/ times per year while thirteen unprotected accident categories in which SCRAM fails are estimated to occur at a combined rate on the order of 10/sup -5/ times per year. These estimates are thought to be representative despite the fact that human performance factors, maintenance and repair, as well as input common cause uncertainties, were not treated explicitly. The overall results indicate that for the CRBRP design no single accident category appears to be dominant, nor can any be totally eliminated from further investigation in the areas of accident phenomenology for in-core events and post-accident phenomenology for containment.

  20. Performance characterization of geopolymer composites for hot sodium exposed sacrificial layer in fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Haneefa, K. Mohammed, E-mail: mhkolakkadan@gmail.com [Department of Civil Engineering, IIT Madras, Chennai (India); Santhanam, Manu [Department of Civil Engineering, IIT Madras, Chennai (India); Parida, F.C. [Radiological Safety Division, Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    2013-12-15

    Highlights: • Performance evaluation of geopolymers subjected to hot liquid sodium is performed. • Apart from mechanical properties, micro-analytical techniques are used for material characterization. • The geopolymer composite showed comparatively lesser damage than conventional cement composites. • Geopolymer technology can emerge as a new choice for sacrificial layer in SCFBRs. - Abstract: A sacrificial layer of concrete is used in sodium cooled fast breeder reactors (SCFBRs) to mitigate thermo-chemical effect of accidentally spilled sodium at and above 550 °C on structural concrete. Performance of this layer is governed by thermo-chemical stability of the ingredients of sacrificial layer concrete. Concrete with limestone aggregate is generally used as a sacrificial layer. Conventional cement based systems exhibit instability in hot liquid sodium environment. Geo-polymer composites are well known to perform excellently at elevated temperatures compared to conventional cement systems. This paper discusses performance of such composites subjected to exposure of hot liquid sodium in air. The investigation includes comprehensive evaluation of various geo-polymer composites before any exposure, after heating to 550 °C in air, and after immersing in hot liquid sodium initially heated to 550 °C in air. Results from the current study indicate that hot liquid sodium produces less damage to geopolymer composites than to the existing conventional cement based system. Hence, the geopolymer technology has potential application in mitigating the degrading effects of sodium fires and can emerge as a new choice for sodium exposed sacrificial layer in SCFBRs.

  1. Assessment of gel-sphere-pac fuel for fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Lackey, W J; Selle, J E [comps.

    1978-10-01

    An assessment of the state of the art for the gel-sphere-pac process was undertaken to provide a sound basis for further development of the technology. Information is provided on sol preparation, sphere forming, drying, sintering, characterization, loading, fuel rod inspection, and irradiation performance. In addition, discussions are included on: evaluation of the potential for scale-up to production capacities, potential problems associated with remote operation, and future work required to further develop the technology. Three techniques are available for microsphere production: (1) internal gelation, (2) external gelation, and (3) gelation by water extraction. Each has its own advantages and disadvantages; for example, internal gelation appears better suited to the preparation of large spheres than the other processes. Numerous advantages and disadvantages are discussed in detail. Scale-up or remote operation of these techniques appears achievable, although some would require less development than others. Techniques have been developed for drying and sintering spheres. Extensive technology has been developed for sphere characterization, handling, and the loading and inspection of fuel pins. Data available to date indicates that sphere-pac oxide fuel will perform similarly to pellet oxide fuels under fast breeder reactor operating conditions. Gel-sphere-pac technology also appears attractive for carbide fuels.

  2. Final report for the Light Water Breeder Reactor proof-of-breeding analytical support project

    Energy Technology Data Exchange (ETDEWEB)

    Graczyk, D.G.; Hoh, J.C.; Martino, F.J.; Nelson, R.E.; Osudar, J.; Levitz, N.M.

    1987-05-01

    The technology of breeding /sup 233/U from /sup 232/Th in a light water reactor is being developed and evaluated by the Westinghouse Bettis Atomic Power Laboratory (BAPL) through operation and examination of the Shippingport Light Water Breeder Reactor (LWBR). Bettis is determining the end-of-life (EOL) inventory of fissile uranium in the LWBR core by nondestructive assay of a statistical sample comprising approximately 500 EOL fuel rods. This determination is being made with an irradiated-fuel assay gauge based on neutron interrogation and detection of delayed neutrons from each rod. The EOL fissile inventory will be compared with the beginning-of-life fissile loading of the LWBR to determine the extent of breeding. In support of the BAPL proof-of-breeding (POB) effort, Argonne National Laboratory (ANL) carried out destructive physical, chemical, and radiometric analyses on 17 EOL LWBR fuel rods that were previously assayed with the nondestructive gauge. The ANL work included measurements on the intact rods; shearing of the rods into pre-designated contiguous segments; separate dissolution of each of the more than 150 segments; and analysis of the dissolver solutions to determine each segment's uranium content, uranium isotopic composition, and loading of selected fission products. This report describes the facilities in which this work was carried out, details operations involved in processing each rod, and presents a comprehensive discussion of uncertainties associated with each result of the ANL measurements. Most operations were carried out remotely in shielded cells. Automated equipment and procedures, controlled by a computer system, provided error-free data acquisition and processing, as well as full replication of operations with each rod. Despite difficulties that arose during processing of a few rod segments, the ANL destructive-assay results satisfied the demanding needs of the parent LWBR-POB program.

  3. Software development methodology for computer based I&C systems of prototype fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Manimaran, M., E-mail: maran@igcar.gov.in; Shanmugam, A.; Parimalam, P.; Murali, N.; Satya Murty, S.A.V.

    2015-10-15

    Highlights: • Software development methodology adopted for computer based I&C systems of PFBR is detailed. • Constraints imposed as part of software requirements and coding phase are elaborated. • Compliance to safety and security requirements are described. • Usage of CASE (Computer Aided Software Engineering) tools during software design, analysis and testing phase are explained. - Abstract: Prototype Fast Breeder Reactor (PFBR) is sodium cooled reactor which is in the advanced stage of construction in Kalpakkam, India. Versa Module Europa bus based Real Time Computer (RTC) systems are deployed for Instrumentation & Control of PFBR. RTC systems have to perform safety functions within the stipulated time which calls for highly dependable software. Hence, well defined software development methodology is adopted for RTC systems starting from the requirement capture phase till the final validation of the software product. V-model is used for software development. IEC 60880 standard and AERB SG D-25 guideline are followed at each phase of software development. Requirements documents and design documents are prepared as per IEEE standards. Defensive programming strategies are followed for software development using C language. Verification and validation (V&V) of documents and software are carried out at each phase by independent V&V committee. Computer aided software engineering tools are used for software modelling, checking for MISRA C compliance and to carry out static and dynamic analysis. Various software metrics such as cyclomatic complexity, nesting depth and comment to code are checked. Test cases are generated using equivalence class partitioning, boundary value analysis and cause and effect graphing techniques. System integration testing is carried out wherein functional and performance requirements of the system are monitored.

  4. Choice of rotatable plug seals for prototype fast breeder reactor: Review of historical perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, N.K., E-mail: nksinha@igcar.gov.in; Raj, Baldev, E-mail: baldev.dr@gmail.com

    2015-09-15

    Highlights: • Choice and arrangement of elastomeric inflatable and backup seals as primary and secondary barriers. • With survey (mid-1930s onwards) of reactor, sealing, R&D and rubber technology. • Load, reliability, safety, life and economy of seals and reactors are key factors. • PFBR blends concepts and experience of MOX fuelled FBRs with original solutions. • R&D indicates inflatable seal advanced fluoroelastomer pivotal in unifying nuclear sealing. - Abstract: Choice and arrangement of elastomeric primary inflatable and secondary backup seals for the rotatable plugs (RPs) of 500 MW (e), sodium cooled, pool type, 2-loop, mixed oxide (MOX) fuelled Prototype Fast Breeder Reactor (PFBR) is depicted with review of various historical perspectives. Static and dynamic operation, largest diameters (PFBR: ∼6.4 m, ∼4.2 m), widest gaps and variations (5 ± 2 mm) and demanding operating requirements make RP openings on top shield (TS) the most difficult to seal which necessitated extensive development from 1950s to early 1990s. Liquid metal freeze seals with life equivalent to reactor prevailed as primary barrier (France, Japan, U.S.S.R.) during pre-1980s in spite of bulk, cost and complexity due to the abilities to meet zero leakage and resist core disruptive accident (CDA). Redefinition of CDA as beyond design basis accident, tolerable leakage and enhanced economisation drive during post-1980s established elastomeric inflatable seal as primary barrier excepting in U.S.S.R. (MOX fuel, freeze seal) and U.S.A. (metallic fuel). Choice of inflatable seal for PFBR RPs considers these perspectives, inherent advantages of elastomers and those of inflatable seals which maximise seal life. Choice of elastomeric backup seal as secondary barrier was governed by reliability and minimisation as well as distribution of load (temperature, radiation, mist) to maximise seal life. The compact sealing combination brings the hanging RPs at about the same elevation to reduce

  5. Summary of estimated doses and risks resulting from routine radionuclide releases from fast breeder reactor fuel cycle facilities

    Energy Technology Data Exchange (ETDEWEB)

    Miller, C.W.; Meyer, H.R.

    1985-01-01

    A project is underway at Oak Ridge National Laboratory to assess the human health and environment effects associated with operation of Liquid Metal Fast Breeder Reactor fuel cycle. In this first phase of the work, emphasis was focused on routine radionuclide releases from reactor and reprocessing facilities. For this study, sites for fifty 1-GW(e) capacity reactors and three reprocessing plants were selected to develop scenarios representative of US power requirements. For both the reactor and reprocessing facility siting schemes selected, relatively small impacts were calculated for locality-specific populations residing within 100 km. Also, the results of these analyses are being used in the identification of research priorities. 13 refs., 2 figs., 3 tabs.

  6. Three core concepts for producing uranium-233 in commercial pressurized light water reactors for possible use in water-cooled breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Conley, G.H.; Cowell, G.K.; Detrick, C.A.; Kusenko, J.; Johnson, E.G.; Dunyak, J.; Flanery, B.K.; Shinko, M.S.; Giffen, R.H.; Rampolla, D.S.

    1979-12-01

    Selected prebreeder core concepts are described which could be backfit into a reference light water reactor similar to current commercial reactors, and produce uranium-233 for use in water-cooled breeder reactors. The prebreeder concepts were selected on the basis of minimizing fuel system development and reactor changes required to permit a backfit. The fuel assemblies for the prebreeder core concepts discussed would occupy the same space envelope as those in the reference core but contain a 19 by 19 array of fuel rods instead of the reference 17 by 17 array. An instrument well and 28 guide tubes for control rods have been allocated to each prebreeder fuel assembly in a pattern similar to that for the reference fuel assemblies. Backfit of these prebreeder concepts into the reference reactor would require changes only to the upper core support structure while providing flexibility for alternatives in the type of fuel used.

  7. Uncertainty evaluation of reliability of shutdown system of a medium size fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Zeliang, Chireuding; Singh, Om Pal, E-mail: singhop@iitk.ac.in; Munshi, Prabhat

    2016-11-15

    Highlights: • Uncertainty analysis of reliability of Shutdown System is carried out. • Monte Carlo method of sampling is used. • The effect of various reliability improvement measures of SDS are accounted. - Abstract: In this paper, results are presented on the uncertainty evaluation of the reliability of Shutdown System (SDS) of a Medium Size Fast Breeder Reactor (MSFBR). The reliability analysis results are of Kumar et al. (2005). The failure rate of the components of SDS are taken from International literature and it is assumed that these follow log-normal distribution. Fault tree method is employed to propagate the uncertainty in failure rate from components level to shutdown system level. The beta factor model is used to account different extent of diversity. The Monte Carlo sampling technique is used for the analysis. The results of uncertainty analysis are presented in terms of the probability density function, cumulative distribution function, mean, variance, percentile values, confidence intervals, etc. It is observed that the spread in the probability distribution of SDS failure rate is less than SDS components failure rate and ninety percent values of the failure rate of SDS falls below the target value. As generic values of failure rates are used, sensitivity analysis is performed with respect to failure rate of control and safety rods and beta factor. It is discovered that a large increase in failure rate of SDS rods is not carried to SDS system failure proportionately. The failure rate of SDS is very sensitive to the beta factor of common cause failure between the two systems of SDS. The results of the study provide insight in the propagation of uncertainty in the failure rate of SDS components to failure rate of shutdown system.

  8. Gas-cooled fast breeder reactor. Quarterly progress report, February 1-April 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    Information is presented concerning the reactor vessel; reactivity control mechanisms and instrumentation; reactor internals; primary coolant circuits;core auxiliary cooling system; reactor core; systems engineering; and reactor safety and reliability;

  9. The long-term future for civilian nuclear power generation in France: The case for breeder reactors. Breeder reactors: The physical and physical chemistry parameters, associate material thermodynamics and mechanical engineering: Novelties and issues

    Science.gov (United States)

    Dautray, Robert

    2011-06-01

    The author firstly gives a summary overview of the knowledge base acquired since the first breeder reactors became operational in the 1950s. "Neutronics", thermal phenomena, reactor core cooling, various coolants used and envisioned for this function, fuel fabrication from separated materials, main equipment (pumps, valves, taps, waste cock, safety circuits, heat exchange units, etc.) have now attained maturity, sufficient to implement sodium cooling circuits. Notwithstanding, the use of metallic sodium still raises certain severe questions in terms of safe handling (i.e. inflammability) and other important security considerations. The structural components, both inside the reactor core and outside (i.e. heat exchange devices) are undergoing in-depth research so as to last longer. The fuel cycle, notably the refabrication of fuel elements and fertile elements, the case of transuranic elements, etc., call for studies into radiation induced phenomena, chemistry separation, separate or otherwise treatments for materials that have different radioactive, physical, thermodynamical, chemical and biological properties. The concerns that surround the definitive disposal of certain radioactive wastes could be qualitatively improved with respect to the pressurized water reactors (PWRs) in service today. Lastly, the author notes that breeder reactors eliminate the need for an isotope separation facility, and this constitutes a significant contribution to contain nuclear proliferation. Among the priorities for a fully operational system (power station - the fuel cycle - operation-maintenance - the spent fuel pool and its cooling system-emergency cooling system-emergency electric power-transportation movements-equipment handling - final disposal of radioactive matter, independent safety barriers), the author includes materials (fabrication of targets, an irradiation and inspection instrument), the chemistry of all sorting processes, equipment "refabrication" or rehabilitation

  10. Computerized operating procedures for shearing and dissolution of segments from LWBR (Light Water Breeder Reactor) fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Osudar, J.; Deeken, P.G.; Graczyk, D.G.; Fagan, J.E.; Martino, F.J.; Parks, J.E.; Levitz, N.M.; Kessie, R.W.; Leddin, J.M.

    1987-05-01

    This report presents two detailed computerized operating procedures developed to assist and control the shearing and dissolution of irradiated fuel rods. The procedures were employed in the destructive analysis of end-of-life fuel rods from the Light Water Breeder Reactor (LWBR) that was designed by the Westinghouse Electric Corporation Bettis Atomic Power Laboratory. Seventeen entire fuel rods from the end-of-life core of the LWBR were sheared into 169 precisely characterized segments, and more than 150 of these segments were dissolved during execution of the LWBR Proof-of-Breeding (LWBR-POB) Analytical Support Project at Argonne National Laboratory. The procedures illustrate our approaches to process monitoring, data reduction, and quality assurance during the LWBR-POB work.

  11. The passive nondestructive assay of the plutonium content of spent-fuel assemblies from the BN-350 fast-breeder reactor in the city of Aqtau, Kazakhstan

    CERN Document Server

    Lestone, J P; Rennie, J A; Sprinkle, J K; Staples, P; Grimm, K N; Hill, R N; Cherradi, I; Islam, N; Koulikov, J; Starovich, Z

    2002-01-01

    The International Atomic Energy Agency is presently interested in developing equipment and techniques to measure the plutonium content of breeder reactor spent-fuel assemblies located in storage ponds before they are relocated to more secure facilities. We present the first quantitative nondestructive assay of the plutonium content of fast-breeder reactor spent-fuel assemblies while still underwater in their facility storage pond. We have calibrated and installed an underwater neutron coincidence counter (Spent Fuel Coincidence Counter (SFCC)) in the BN-350 reactor spent-fuel pond in Aqtau, Kazakhstan. A procedure has been developed to convert singles and doubles (coincidence) neutron rates observed by the SFCC into the total plutonium content of a given BN-350 spent-fuel assembly. The plutonium content has been successfully determined for spent-fuel assemblies with a contact radiation level as high as approx 10 sup 5 Rads/h. Using limited facility information and multiple measurements along the length of spe...

  12. Fabrication, properties, and tritium recovery from solid breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.E. (Argonne National Lab., IL (USA)); Kondo, T. (Japan Atomic Energy Research Inst., Tokyo (Japan)); Roux, N. (CEA Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)); Tanaka, S. (Tokyo Univ. (Japan)); Vollath, D. (Kernforschungszentrum Karlsruhe GmbH (Germany, F.R.))

    1991-01-01

    The breeding blanket is a key component of the fusion reactor because it directly involves tritium breeding and energy extraction, both of which are critical to development of fusion power. The lithium ceramics continue to show promise as candidate breeder materials. This promise was recognized by the International Thermonuclear Experimental Reactor (ITER) design team in its selection of ceramics as the first option for the ITER breeder material. Blanket design studies have indicated properties in the candidate materials data base that need further investigation. Current studies are focusing on tritium release behavior at high burnup, changes in thermophysical properties with burnup, compatibility between the ceramic breeder and beryllium multiplier, and phase changes with burnup. Laboratory and in-reactor tests, some as part of an international collaboration for development of ceramic breeder materials, are underway. 133 refs., 1 fig.

  13. Evaluation of the Initial Isothermal Physics Measurements at the Fast Flux Test Facility, a Prototypic Liquid Metal Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    John D. Bess

    2010-03-01

    The Fast Flux Test Facility (FFTF) was a 400-MWt, sodium-cooled, low-pressure, high-temperature, fast-neutron flux, nuclear fission reactor plant designed for the irradiation testing of nuclear reactor fuels and materials for the development of liquid metal fast breeder reactors (LMFBRs). The FFTF was fueled with plutonium-uranium mixed oxide (MOX) and reflected by Inconel-600. Westinghouse Hanford Company operated the FFTF as part of the Hanford Engineering Development Laboratory (HEDL) for the U.S. Department of Energy on the Hanford Site near Richland, Washington. Although the FFTF was a testing facility not specifically designed to breed fuel or produce electricity, it did provide valuable information for LMFBR projects and base technology programs in the areas of plant system and component design, component fabrication, prototype testing, and site construction. The major objectives of the FFTF were to provide a strong, disciplined engineering base for the LMFBR program, provide fast flux testing for other U.S. programs, and contribute to the development of a viable self-sustaining competitive U.S. LMFBR industry. During its ten years of operation, the FFTF acted as a national research facility to test advanced nuclear fuels, materials, components, systems, nuclear power plant operating and maintenance procedures, and active and passive reactor safety technologies; it also produced a large number of isotopes for medical and industrial users, generated tritium for the U.S. fusion research program, and participated in cooperative, international research work. Prior to the implementation of the reactor characterization program, a series of isothermal physics measurements were performed; this acceptance testing program consisted of a series of control rod worths, critical rod positions, subcriticality measurements, maximum reactivity addition rates, shutdown margins, excess reactivity, and isothermal temperature coefficient reactivity. The results of these

  14. TOKOPS: Tokamak Reactor Operations Study: The influence of reactor operations on the design and performance of tokamaks with solid-breeder blankets: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Conn, R.W.; Ghoniem, N.M.; Firestone, M.A. (eds.)

    1986-09-01

    Reactor system operation and procedures have a profound impact on the conception and design of power plants. These issues are studied here using a model tokamak system employing a solid-breeder blanket. The model blanket is one which has evolved from the STARFIRE and BCSS studies. The reactor parameters are similar to those characterizing near-term fusion engineering reactors such as INTOR or NET (Next European Tokamak). Plasma startup, burn analysis, and methods for operation at various levels of output power are studied. A critical, and complicating, element is found to be the self-consistent electromagnetic response of the system, including the presence of the blanket and the resulting forces and loadings. Fractional power operation, and the strategy for burn control, is found to vary depending on the scaling law for energy confinement, and an extensive study is reported. Full-power reactor operation is at a neutron wall loading pf 5 MW/m/sup 2/ and a surface heat flux of 1 MW/m/sup 2/. The blanket is a pressurized steel module with bare beryllium rods and low-activation HT-9-(9-C-) clad LiAlO/sub 2/ rods. The helium coolant pressure is 5 MPa, entering the module at 297/sup 0/C and exiting at 550/sup 0/C. The system power output is rated at 1000 MW(e). In this report, we present our findings on various operational scenarios and their impact on system design. We first start with the salient aspects of operational physics. Time-dependent analyses of the blanket and balance of plant are then presented. Separate abstracts are included for each chapter.

  15. Techniques for processing remote field eddy current signals from bend regions of steam generator tubes of prototype fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Thirunavukkarasu, S. [Non Destructive Evaluation Division, Indira Gandhi Centre for Atomic Research, Kalpakkam, TN 603 102 (India); Rao, B.P.C., E-mail: bpcrao@igcar.gov.in [Non Destructive Evaluation Division, Indira Gandhi Centre for Atomic Research, Kalpakkam, TN 603 102 (India); Jayakumar, T.; Raj, Baldev [Non Destructive Evaluation Division, Indira Gandhi Centre for Atomic Research, Kalpakkam, TN 603 102 (India)

    2011-04-15

    Steam generator (SG) is one of the most critical components of sodium cooled fast breeder reactor. Remote field eddy current (RFEC) technique has been chosen for in-service inspection (ISI) of these ferromagnetic SG tubes made of modified 9Cr-1Mo steel (Grade 91). Expansion bends are provided in the SGs to accommodate differential thermal expansion. During ISI using RFEC technique, in expansion bend regions, exciter-receiver coil misalignment, bending stresses, probe wobble and magnetic permeability variations produce disturbing noise hindering detection of defects. Fourier filtering, cross-correlation and wavelet transform techniques have been studied for noise reduction as well as enhancement of RFEC signals of defects in bend regions, having machined grooves and localized defects. Performance of these three techniques has been compared using signal-to-noise ratio (SNR). Fourier filtering technique has shown better performance for noise reduction while cross-correlation technique has resulted in significant enhancement of signals. Wavelet transform technique has shown the combined capability of noise reduction and signal enhancement and resulted in unambiguous detection of 10% of wall loss grooves and localized defects in the bend regions with SNR better than 7 dB.

  16. Systemic Administration of Proteoglycan Protects BALB/c Retired Breeder Mice from Experimental Arthritis

    Directory of Open Access Journals (Sweden)

    Larissa Lumi Watanabe Ishikawa

    2016-01-01

    Full Text Available This study was undertaken to evaluate the prophylactic potential of proteoglycan (PG administration in experimental arthritis. Female BALB/c retired breeder mice received two (2xPG50 and 2xPG100 groups or three (3xPG50 group intraperitoneal doses of bovine PG (50 μg or 100 μg every three days. A week later the animals were submitted to arthritis induction by immunization with three i.p. doses of bovine PG associated with dimethyldioctadecylammonium bromide adjuvant at intervals of 21 days. Disease severity was daily assessed after the third dose by score evaluation. The 3xPG50 group showed significant reduction in prevalence and clinical scores. This protective effect was associated with lower production of IFN-γ and IL-17 and increased production of IL-5 and IL-10 by spleen cells restimulated in vitro with PG. Even though previous PG administration restrained dendritic cells maturation this procedure did not alter the frequency of regulatory Foxp3+ T cells. Lower TNF-α and IL-6 levels and higher expression of ROR-γ and GATA-3 were detected in the paws of protected animals. A delayed-type hypersensitivity reaction confirmed specific tolerance induction. Taken together, these results indicate that previous PG inoculation determines a specific tolerogenic effect that is able to decrease severity of subsequently induced arthritis.

  17. Core loading pattern optimization of thorium fueled heavy water breeder reactor using genetic algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Soewono, C. N.; Takaki, N. [Dept. of Applied Science Engineering, Faculty Tokai Univ., Kanagawa-ken, Hiratsuka-shi Kitakaname 4-1-1 (Japan)

    2012-07-01

    In this work genetic algorithm was proposed to solve fuel loading pattern optimization problem in thorium fueled heavy water reactor. The objective function of optimization was to maximize the conversion ratio and minimize power peaking factor. Those objectives were simultaneously optimized using non-dominated Pareto-based population ranking optimal method. Members of non-dominated population were assigned selection probabilities based on their rankings in a manner similar to Baker's single criterion ranking selection procedure. A selected non-dominated member was bred through simple mutation or one-point crossover process to produce a new member. The genetic algorithm program was developed in FORTRAN 90 while neutronic calculation and analysis was done by COREBN code, a module of core burn-up calculation for SRAC. (authors)

  18. Seismic design technology for breeder reactor structures. Volume 4. Special topics in piping and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into five chapters: experimental verification of piping systems, analytical verification of piping restraint systems, seismic analysis techniques for piping systems with multisupport input, development of floor spectra from input response spectra, and seismic analysis procedures for in-core components. (DLC)

  19. EBR-II Reactor Physics Benchmark Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Pope, Chad L. [Idaho State Univ., Pocatello, ID (United States); Lum, Edward S [Idaho State Univ., Pocatello, ID (United States); Stewart, Ryan [Idaho State Univ., Pocatello, ID (United States); Byambadorj, Bilguun [Idaho State Univ., Pocatello, ID (United States); Beaulieu, Quinton [Idaho State Univ., Pocatello, ID (United States)

    2017-12-28

    This report provides a reactor physics benchmark evaluation with associated uncertainty quantification for the critical configuration of the April 1986 Experimental Breeder Reactor II Run 138B core configuration.

  20. Cost/performance comparison between pulse columns and centrifugal contactors designed to process Clinch River Breeder Reactor fuel

    Energy Technology Data Exchange (ETDEWEB)

    Ciucci, J.A. Jr.

    1983-12-01

    A comparison between pulse columns and centrifugal contactors was made to determine which type of equipment was more advantageous for use in the primary decontamination cycle of a remotely operated fuel reprocessing plant. Clinch River Breeder Reactor (CRBR) fuel was chosen as the fuel to be processed in the proposed 1 metric tonne/day reprocessing facility. The pulse columns and centrifugal contactors were compared on a performance and total cost basis. From this comparison, either the pulse columns or the centrifugal contactors will be recommended for use in a fuel reprocessing plant built to reprocess CRBR fuel. The reliability, solvent exposure to radiation, required time to reach steady state, and the total costs were the primary areas of concern for the comparison. The pulse column units were determined to be more reliable than the centrifugal contactors. When a centrifugal contactor motor fails, it can be remotely changed in less than one eight hour shift. Pulse columns expose the solvent to approximately five times as much radiation dose as the centrifugal contactor units; however, the proposed solvent recovery system adequately cleans the solvent for either case. The time required for pulse columns to reach steady state is many times longer than the time required for centrifugal contactors to reach steady state. The cost comparison between the two types of contacting equipment resulted in centrifugal contactors costing 85% of the total cost of pulse columns when the contactors were stacked on three levels in the module. If the centrifugal contactors were all positioned on the top level of a module with the unoccupied volume in the module occupied by other equipment, the centrifugal contactors cost is 66% of the total cost of pulse columns. Based on these results, centrifugal contactors are recommended for use in a remotely operated reprocessing plant built to reprocess CRBR fuel.

  1. Thermal-performance study of liquid metal fast breeder reactor insulation

    Energy Technology Data Exchange (ETDEWEB)

    Shiu, Kelvin K.

    1980-09-01

    Three types of metallic thermal insulation were investigated analytically and experimentally: multilayer reflective plates, multilayer honeycomb composite, and multilayer screens. Each type was subjected to evacuated and nonevacuated conditions, where thermal measurements were made to determine thermal-physical characteristics. A variation of the separation distance between adjacent reflective plates of multilayer reflective plates and multilayer screen insulation was also experimentally studied to reveal its significance. One configuration of the multilayer screen insulation was further selected to be examined in sodium and sodium oxide environments. The emissivity of Type 304 stainless steel used in comprising the insulation was measured by employing infrared technology. A comprehensive model was developed to describe the different proposed types of thermal insulation. Various modes of heat transfer inherent in each type of insulation were addressed and their relative importance compared. Provision was also made in the model to allow accurate simulation of possible sodium and sodium oxide contamination of the insulation. The thermal-radiation contribution to heat transfer in the temperature range of interest for LMFBR's was found to be moderate, and the suppression of natural convection within the insulation was vital in preserving its insulating properties. Experimental data were compared with the model and other published results. Moreover, the three proposed test samples were assessed and compared under various conditions as viable LMFBR thermal insulations.

  2. Calculation of a materials relocation experiment simulating a core disruptive accident condition in fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Sawada, T. [Tokyo Inst. of Tech. (Japan). Research Lab. for Nuclear Reactors; Ninokata, H. [Tokyo Inst. of Tech. (Japan). Research Lab. for Nuclear Reactors; Shimizu, A. [Tokyo Inst. of Tech. (Japan). Research Lab. for Nuclear Reactors

    1995-07-01

    This paper describes an interpretation of the SIMBATH (Simulationsexperimente in Brennelementattrappen mit Thermit) experiments that use the SIMMER-II code. A series of SIMBATH experiments has aimed at simulating fuel pin disintegration and following materials relocation in the test sections of a single pin to 37-pin bundles. In the calculation, three modifications were incorporated into the SIMMER-II code. With these modifications, the calculation showed good agreement with the experimental measurements with respect to the void region propagation in sodium flow and the molten materials relocation leading to flow blockage. A set of parametric calculations has clarified the range of applicability of parameters for materials relocation and flow blockage formation. The particle radius r{sub p} in blockage regions and the mutiplier for particle viscosity (PARVIS) are recommended to be r{sub p}>or{approx}1/2D{sub h} and 0.001Pas

  3. Seclazone Reactor Modeling And Experimental Validation

    Energy Technology Data Exchange (ETDEWEB)

    Osinga, T. [ETH-Zuerich (Switzerland); Olalde, G. [CNRS Odeillo (France); Steinfeld, A. [PSI and ETHZ (Switzerland)

    2005-03-01

    A numerical model is formulated for the SOLZINC solar chemical reactor for the production of Zn by carbothermal reduction of ZnO. The model involves solving, by the finite-volume technique, a 1D unsteady state energy equation that couples heat transfer to the chemical kinetics for a shrinking packed bed exposed to thermal radiation. Validation is accomplished by comparison with experimentally measured temperature profiles and Zn production rates as a function of time, obtained for a 5-kW solar reactor tested at PSI's solar furnace. (author)

  4. Superalloy applications in the fast breeder reactor. [Alloy-A-286; inconel 706; inconel 718; nimonic PE16; alloy-M-813

    Energy Technology Data Exchange (ETDEWEB)

    Powell, R.W.

    1976-01-01

    The economics of the LMFBR are dependent on the breeding of new fuel in the reactor core and this can be improved by the use of advanced alloys as core structural components. The environment of the core makes superalloys a natural choice for these components, but phenomena related directly to neutron irradiation necessitate extensive testing. Consequently, commercially-available superalloys, together with a number of developmental alloys are being tested in existing LMFBR's and by simulation techniques to determine the best alloy for use in the LMFBR core. It presently appears that such materials will indeed be capable of the performance required, and will greatly facilitate the commercial realization of the fast breeder reactor.

  5. The long-term future for civilian nuclear power generation in France: The case for breeder reactors. Breeder reactors: The physical and physical chemistry parameters, associate material thermodynamics and mechanical engineering: Novelties and issues; La production d'electricite d'origine nucleaire en France, dans le futur a long terme: Le cas des surgenerateurs: Les reacteurs nucleaires surgenerateurs: Les parametres physique et physico-chimiques, la thermodynamique associee des materiaux et de l'ingenierie mecanique: Nouveautes et options

    Energy Technology Data Exchange (ETDEWEB)

    Dautray, R. [Academie des sciences, 23, quai de Conti, 75270 Paris cedex 06 (France)

    2011-06-15

    The author gives a summary overview of the knowledge base acquired since the first breeder reactors became operational in the fifties. Neutron transport theory, thermal phenomena, reactor core cooling, various coolants used and envisioned for this function, fuel fabrication from separated materials, main equipment (pumps, valves, heat exchanges...) have now attained maturity, sufficient to implement sodium cooling circuits. However, the use of metallic sodium still raises certain severe questions in terms of safe handling and security considerations. The structural components, both inside the reactor core and outside (i.e. heat exchangers) are undergoing in-depth research so as to last longer. The fuel cycle, notably the re-fabrication of fuel elements and fertile elements, the case of transuranic elements, etc., call for studies into radiation induced phenomena, chemistry separation, separate or otherwise treatments for materials that have different radioactive, physical, thermodynamical, chemical and biological properties. The concerns that surround the definitive disposal of certain radioactive wastes could be qualitatively improved with respect to the pressurized water reactors (PWRs) in service today. Lastly, the author notes that breeder reactors eliminate the need for an isotope separation facility, and this constitutes a significant contribution to contain nuclear proliferation. France was in the forefront of nuclear breeder power generation science, technological research and also in the knowledge base related to breeder reactors. It is in the country's interest to pursue these efforts. (author)

  6. Observations on Arthritis in Broiler Breeder Chickens Experimentally Infected with Staphylococcus aureus

    Directory of Open Access Journals (Sweden)

    Chang-Qin Gu§, Xue-Ying Hu§, Chang-Qing Xie1, Wan-Po Zhang, De-Hai Wang, Quan Zhou and Guo-Fu Cheng1*

    2013-04-01

    Full Text Available Staphylococcus aureus is the most common cause of bacterial arthritis in broiler breeder chickens. In this study, we established a model of broiler breeder chicken arthritis inoculated with Staph. aureus isolated from a spontaneously occurring bacterial arthritis in chickens. We evaluated the model by bacteriology, serology, pathology, and immunology. The results showed that 2.5 × 109 cfu Staph. aureus injected into the right joint cavity can successfully induce a chicken arthritis model. The majority of the infected chickens suffered lameness and joint swelling at 3 days post-inoculation (DPI. The death peak time was on 7 DPI and the mortality rate was 51.1%. Staph. aureus can be continuously isolated from the blood and left joint synovial fluid of the infected chickens. Lesions found on the infected chickens consisted of swollen joints full of caseous exudates, cartilage injury, and synovial membrane thickening with infiltration of inflammatory cells. The center of the lesion contained many round bacterial cocci. With joint injury aggravation, intra-articular hyaluronic acid gradually decreased, and serum interleukin-6 became significantly higher compared with the control (P<0.01 from 3 DPI. The results indicated that the chicken models of Staph. aureus-mediated arthritis were successful, and can be used to gain a better understanding of the host-bacterium relationship.

  7. Special Analysis for the Disposal of the INL Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) Waste Stream at the Area 5 Radioactive Waste Management Site

    Energy Technology Data Exchange (ETDEWEB)

    Shott, Gregory [National Security Technologies, LLC, Las Vegas, NV (United States)

    2017-03-21

    This special analysis (SA) evaluates whether the Idaho National Laboratory (INL) Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) waste stream (INEL167203QR1, Revision 0) is suitable for shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS) on the Nevada National Security Site (NNSS). Disposal of the INL Waste Associated with the Unirradiated LWBR waste meets all U.S. Department of Energy (DOE) Manual DOE M 435.1-1, “Radioactive Waste Management Manual,” Chapter IV, Section P performance objectives (DOE 1999). The INL Waste Associated with the Unirradiated LWBR waste stream is recommended for acceptance with the condition that the total uranium-233 (233U) inventory be limited to 2.7E13 Bq (7.2E2 Ci).

  8. Material unaccounted for at the Southwest Experimental Fast Oxide Reactor: The SEFOR MUF

    Energy Technology Data Exchange (ETDEWEB)

    Higinbotham, W.A.

    1994-11-07

    The U.S. Atomic Energy Commission contracted with the General Electric Company to design, construct, and operate the Southwest Experimental Fast Oxide Reactor (SEFOR) to measure the Doppler effect for fast neutron breeder reactors. It contracted with Nuclear Fuel Services to fabricate the fuel rods for the reactor. When the reactor went critical in May, 1969, it appeared that some of the mixed uranium-plutonium oxide (MOX) fuel rods did not contain the specified quantity of plutonium. The SEFOR operators soon found several fuel rods which appeared to be low in plutonium. The safeguards group at Brookhaven was asked to look into the problem and, if possible, determine how much plutonium was missing from the unirradiated rods and from the larger number which had been slightly irradiated in the reactor. It was decided that the plutonium content of the unirradiated and irradiated rods could be measured relative to a reference rod using a high resolution gamma-ray detector and also by neutron measurements using an auto-correlation circuit recently developed at the Naval Research Laboratory (NRL). During the next two years, Brookhaven personnel and C.V. Strain of NRL made several trips to the SEFOR reactor. About 250 of the 775 rods were measured by two or more methods, using a sodium-iodide detector, a high-resolution germanium detector, a neutron detector, or the reactor (to measure reactivity). The research team concluded that 4.6 {+-} 0.46 kg of plutonium was missing out of the 433 kg that the rods should have contained. This report describes the SEFOR experiment and the procedures used to determine the material unaccounted for, or MUF.

  9. Control rod calibration methods for fast breeder reactors applied to Phenix; Les methodes d'etalonnage des barres de commande des reacteurs a neutrons rapides application a Phenix

    Energy Technology Data Exchange (ETDEWEB)

    Lecourt, G

    1998-06-18

    The control and the emergency shutdown of a fast breeder reactor depends essentially on control rods. For this reason, it is imperative to know exactly how much anti reactivity is introduced with the rods in the reactor core. Different methods have been compared in order to see if they are compatible with Phenix reactor. Their limits have been studied. The shadow and anti shadow effects that can the rods make one to the other and then their effective weight of the rods screen have been clarified. (N.C.)

  10. Thermal hydraulic parametric investigation of decay heat removal from degraded core of a sodium cooled fast Breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Verma, Lokesh [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Kumar Sharma, Anil, E-mail: aksharma@igcar.gov.in [Reactor Design Group, Indira Gandhi Centre for Atomic Research, HBNI, Kalpakkam (India); Velusamy, K. [Reactor Design Group, Indira Gandhi Centre for Atomic Research, HBNI, Kalpakkam (India)

    2017-03-15

    Highlights: • Decay heat removal from degraded core of a typical SFR is highlighted. • Influence of number of DHXs in operation on PAHR is analyzed. • Investigations on structural integrity of the inner vessel and core catcher. • Feasibility study for retention of a part of debris in upper pool of SFR. - Abstract: Ensuring post accident decay heat removal with high degree of reliability following a Core Disruptive Accident (CDA) is very important in the design of sodium cooled fast reactors (SFR). In the recent past, a lot of research has been done towards the design of an in-vessel core catcher below the grid plate to prevent the core debris reaching the main vessel in a pool type SFR. However, during an energetic CDA, the entire core debris is unlikely to reach the core catcher. A significant part of the debris is likely to settle in core periphery between radial shielding subassemblies and the inner vessel. Failure of inner vessel due to the decay heat can lead to core debris reaching the main vessel and threatening its integrity. On the other hand, retention of a part of debris in core periphery can reduce the load on main core catcher. Towards achieving an optimum design of SFR and safety evaluation, it is essential to quantify the amount of heat generating core debris that can be retained safely within the primary vessel. This has been performed by a mathematical simulation comprising solution of 2-D transient form of the governing equations of turbulent sodium flow and heat transfer with Boussinesq approximations. The conjugate conduction-convection model adopted for this purpose is validated against in-house experimental data. Transient evolutions of natural convection in the pools and structural temperatures in critical components have been predicted. It is found that 50% of the core debris can be safely accommodated in the gap between radial shielding subassemblies and inner vessel without exceeding structural temperature limit. It is also

  11. Numerical analysis of thermal stratification phenomena in upper plenum of a fast breeder reactor (1). Evaluation of thermal stratification phenomena near the region of flow holes

    Energy Technology Data Exchange (ETDEWEB)

    Suda, Kazunori; Muramatu, Toshiharu; Yamaguchi, Akira [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    2002-12-01

    Thermal stratification phenomena are observed in an upper plenum of liquid metal fast breeder reactors (LMFBRs) under reactor scram conditions, which give rise to thermal stress on structural components. Therefore it is important to evaluate characteristics of the phenomena in the design on the internal structures in an LMFBR plenum. To evaluate long-term characteristics of thermal stratification phenomena in a typical LMFBR upper plenum, numerical analysis was carried out with a multi-dimensional thermohydraulics code AQUA for a scram event from full power operation condition. Thereafter the numerical results were compared with extrapolated results of measured transient data on the 40% operation condition. From the thermohydraulic analysis by the AQUA code, the following results have been obtained. (Long-term characteristics of thermal stratification phenomena) The cold fluid region near the inside inner barrel was expanded with accumulation of the cold fluid in the lower region of the plenum after 300 seconds from the reactor scram, so that the fluid from core flowed to the lower region of the upper plenum. The characteristics of axial temperature distributions in the upper plenum were similar to them at the 300 seconds. The thermal stratification interface was located initially around intermediate position between upper lower flow holes. And an another thermal stratification interface was formed around the inner barrel support plate after 300 seconds from the scram, so that the cold fluid accumulated in the lower region of the plenum. But the thermal stratification interface around the inner barrel support plate was disappeared by mixture and heat conduction of coolant of circumferential direction. The thermal stratification interface which was located below in the upper flow holes, rose to the upward position of the upper flow holes at the 720 seconds. In annular gap region between the inner barrel and the reactor vessel wall, thermal stratification interface

  12. Plasma heating systems planned for the Argonne experimental power reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bertoncini, P.; Brooks, J.; Fasolo, J.; Mills, F.; Moretti, A.; Norem, J.

    1976-01-01

    A scoping study and conceptual design of a tokamak experimental power reactor (TEPR) have been completed. The design objectives of the TEPR are to operate for ten years at or near electrical power breakeven conditions with a duty factor of greater than or equal to 50 percent and to demonstrate the feasibility of tokamak fusion power reactor techniques. These objectives can be met by a design which has a major radius of 6.25 m and a plasma radius of 2.1 m. Parameters for this reactor are listed, and a diagram is given. This paper will describe TEPR plasma heating systems. Neutral beam heating and rf heating are described.

  13. Investigation of mixing chamber for experimental FGD reactor

    Directory of Open Access Journals (Sweden)

    Novosád Jan

    2017-01-01

    Full Text Available This article deals with numerical investigation of flow and mixing of air and sulphur dioxide SO2 in designated mixing chamber. The mixing chamber is a part of experimental laboratory reactor designed for simulating the flue gas desulfurization (FGD process. Aim of this work is the numerical investigation of effect of different mixing chamber geometries to mixture composition, especially to mass fraction of sulphur dioxide. Using of similar concentration of sulphur dioxide in the experimental reactor as in the real process is necessary to be able to make additional research. Conclusion describes the effect of different geometries of mixing chamber to mixing. The aim of this work is to develop perfectly works mixing chamber, which will be manufactured and then implemented into experimental FGD reactor. The results will be validated by experiment after the mixing chamber will be manufactured.

  14. Experimental Criticality Benchmarks for SNAP 10A/2 Reactor Cores

    Energy Technology Data Exchange (ETDEWEB)

    Krass, A.W.

    2005-12-19

    This report describes computational benchmark models for nuclear criticality derived from descriptions of the Systems for Nuclear Auxiliary Power (SNAP) Critical Assembly (SCA)-4B experimental criticality program conducted by Atomics International during the early 1960's. The selected experimental configurations consist of fueled SNAP 10A/2-type reactor cores subject to varied conditions of water immersion and reflection under experimental control to measure neutron multiplication. SNAP 10A/2-type reactor cores are compact volumes fueled and moderated with the hydride of highly enriched uranium-zirconium alloy. Specifications for the materials and geometry needed to describe a given experimental configuration for a model using MCNP5 are provided. The material and geometry specifications are adequate to permit user development of input for alternative nuclear safety codes, such as KENO. A total of 73 distinct experimental configurations are described.

  15. Experimental studies of irradiated and hydrogen implantation damaged reactor steels

    Energy Technology Data Exchange (ETDEWEB)

    Slugeň, Vladimír, E-mail: vladimir.slugen@stuba.sk; Pecko, Stanislav; Sojak, Stanislav

    2016-01-15

    Radiation degradation of nuclear materials can be experimentally simulated via ion implantation. In our case, German reactor pressure vessel (RPV) steels were studied by positron annihilation lifetime spectroscopy (PALS). This unique non-destructive method can be effectively applied for the evaluation of microstructural changes and for the analysis of degradation of reactor steels due to neutron irradiation and proton implantation. Studied specimens of German reactor pressure vessel steels are originally from CARINA/CARISMA program. Eight specimens were measured in as-received state and two specimens were irradiated by neutrons in German experimental reactor VAK (Versuchsatomkraftwerk Kahl) in the 1980s. One of the specimens which was in as-received and neutron irradiated condition was also used for simulation of neutron damage by hydrogen nuclei implantation. Defects with the size of about 1–2 vacancies with relatively small contribution (with intensity on the level of 20–40 %) were observed in “as-received” steels. A significant increase in the size of the induced defects due to neutron damage was observed in the irradiated specimens resulting in 2–3 vacancies. The size and intensity of defects reached a similar level as in the specimens irradiated in the nuclear reactor due to the implantation of hydrogen ions with energies of 100 keV (up to the depth <500 nm).

  16. Experimental studies of irradiated and hydrogen implantation damaged reactor steels

    Science.gov (United States)

    Slugeň, Vladimír; Pecko, Stanislav; Sojak, Stanislav

    2016-01-01

    Radiation degradation of nuclear materials can be experimentally simulated via ion implantation. In our case, German reactor pressure vessel (RPV) steels were studied by positron annihilation lifetime spectroscopy (PALS). This unique non-destructive method can be effectively applied for the evaluation of microstructural changes and for the analysis of degradation of reactor steels due to neutron irradiation and proton implantation. Studied specimens of German reactor pressure vessel steels are originally from CARINA/CARISMA program. Eight specimens were measured in as-received state and two specimens were irradiated by neutrons in German experimental reactor VAK (Versuchsatomkraftwerk Kahl) in the 1980s. One of the specimens which was in as-received and neutron irradiated condition was also used for simulation of neutron damage by hydrogen nuclei implantation. Defects with the size of about 1-2 vacancies with relatively small contribution (with intensity on the level of 20-40 %) were observed in "as-received" steels. A significant increase in the size of the induced defects due to neutron damage was observed in the irradiated specimens resulting in 2-3 vacancies. The size and intensity of defects reached a similar level as in the specimens irradiated in the nuclear reactor due to the implantation of hydrogen ions with energies of 100 keV (up to the depth <500 nm).

  17. Thermal breeder fuel enrichment zoning

    Science.gov (United States)

    Capossela, Harry J.; Dwyer, Joseph R.; Luce, Robert G.; McCoy, Daniel F.; Merriman, Floyd C.

    1992-01-01

    A method and apparatus for improving the performance of a thermal breeder reactor having regions of higher than average moderator concentration are disclosed. The fuel modules of the reactor core contain at least two different types of fuel elements, a high enrichment fuel element and a low enrichment fuel element. The two types of fuel elements are arranged in the fuel module with the low enrichment fuel elements located between the high moderator regions and the high enrichment fuel elements. Preferably, shim rods made of a fertile material are provided in selective regions for controlling the reactivity of the reactor by movement of the shim rods into and out of the reactor core. The moderation of neutrons adjacent the high enrichment fuel elements is preferably minimized as by reducing the spacing of the high enrichment fuel elements and/or using a moderator having a reduced moderating effect.

  18. Incipient Transient Detection in Reactor Systems: Experimental and Theoretical Investigation

    Energy Technology Data Exchange (ETDEWEB)

    Lefteri H. Tsoukalas; S.T. Revankar; X Wang; R. Sattuluri

    2005-09-27

    The main goal of this research was to develop a method for detecting reactor system transients at the earliest possible time through a comprehensive experimental, testing and benchmarking program. This approach holds strong promise for developing new diagnostic technologies that are non-intrusive, generic and highly portable across different systems. It will help in the design of new generation nuclear power reactors, which utilize passive safety systems with a reliable and non-intrusive multiphase flow diagnostic system to monitor the function of the passive safety systems. The main objective of this research was to develop an improved fuzzy logic based detection method based on a comprehensive experimental testing program to detect reactor transients at the earliest possible time, practically at their birth moment. A fuzzy logic and neural network based transient identification methodology and implemented in a computer code called PROTREN was considered in this research and was compared with SPRT (Sequentially Probability Ratio Testing) decision and Bayesian inference. The project involved experiment, theoretical modeling and a thermal-hydraulic code assessment. It involved graduate and undergraduate students participation providing them with exposure and training in advanced reactor concepts and safety systems. In this final report, main tasks performed during the project period are summarized and the selected results are presented. Detailed descriptions for the tasks and the results are presented in previous yearly reports (Revankar et al 2003 and Revankar et al 2004).

  19. Structural response of 1/20-scale models of the Clinch River Breeder Reactor to a simulated hypothetical core-disruptive accident

    Energy Technology Data Exchange (ETDEWEB)

    Romander, C M; Cagliostro, D J

    1978-10-01

    Five experiments were performed to help evaluate the structural integrity of the reactor vessel and head design and to verify code predictions. In the first experiment (SM 1), a detailed model of the head was loaded statically to determine its stiffness. In the remaining four experiments (SM 2 to SM 5), models of the vessel and head were loaded dynamically under a simulated 661 MW-s hypothetical core disruptive accident (HCDA). Models SM 2 to SM 4, each of increasing complexity, systematically showed the effects of upper internals structures, a thermal liner, core support platform, and torospherical bottom on vessel response. Model SM 5, identical to SM 4 but more heavily instrumented, demonstrated experimental reproducibility and provided more comprehensive data. The models consisted of a Ni 200 vessel and core barrel, a head with shielding and simulated component masses, and an upper internals structure (UIS).

  20. Experimental Investigation of Effect on Hydrate Formation in Spray Reactor

    Directory of Open Access Journals (Sweden)

    Jianzhong Zhao

    2015-01-01

    Full Text Available The effects of reaction condition on hydrate formation were conducted in spray reactor. The temperature, pressure, and gas volume of reaction on hydrate formation were measured in pure water and SDS solutions at different temperature and pressure with a high-pressure experimental rig for hydrate formation. The experimental data and result reveal that additives could improve the hydrate formation rate and gas storage capacity. Temperature and pressure can restrict the hydrate formation. Lower temperature and higher pressure can promote hydrate formation, but they can increase production cost. So these factors should be considered synthetically. The investigation will promote the advance of gas storage technology in hydrates.

  1. Special Analysis for the Disposal of the Idaho National Laboratory Unirradiated Light Water Breeder Reactor Rods and Pellets Waste Stream at the Area 5 Radioactive Waste Management Site, Nevada National Security Site, Nye County, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-08-31

    The purpose of this special analysis (SA) is to determine if the Idaho National Laboratory (INL) Unirradiated Light Water Breeder Reactor (LWBR) Rods and Pellets waste stream (INEL103597TR2, Revision 2) is suitable for disposal by shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS). The INL Unirradiated LWBR Rods and Pellets waste stream consists of 24 containers with unirradiated fabricated rods and pellets composed of uranium oxide (UO2) and thorium oxide (ThO2) fuel in zirconium cladding. The INL Unirradiated LWBR Rods and Pellets waste stream requires an SA because the 229Th, 230Th, 232U, 233U, and 234U activity concentrations exceed the Nevada National Security Site (NNSS) Waste Acceptance Criteria (WAC) Action Levels.

  2. Structural response of 1/20-scale models of the Clinch River Breeder Reactor to a simulated hypothetical core disruptive accident. Technical report 4

    Energy Technology Data Exchange (ETDEWEB)

    Romander, C. M.; Cagliostro, D. J.

    1978-10-01

    Five experiments were performed to help evaluate the structural integrity of the reactor vessel and head design and to verify code predictions. In the first experiment (SM 1), a detailed model of the head was loaded statically to determine its stiffness. In the remaining four experiments (SM 2 to SM 5), models of the vessel and head were loaded dynamically under a simulated 661 MW-sec hypothetical core disruptive accident (HCDA). Models SM 2 to SM 4, each of increasing complexity, systematically showed the effects of upper internals structures, a thermal liner, core support platform, and torospherical bottom on vessel response. Model SM 5, identical to SM 4 but more heavily instrumented, demonstrated experimental reproducibility and provided more comprehensive data. The models consisted of a Ni 200 vessel and core barrel, a head with shielding and simulated component masses, an upper internals structure (UIS), and, in the more complex models SM 4 and SM 5, a Ni 200 thermal liner and core support structure. Water simulated the liquid sodium coolant and a low-density explosive simulated the HCDA loads.

  3. Methanol synthesis in a countercurrent gas-solid-solid trickle flow reactor. An experimental study

    NARCIS (Netherlands)

    Kuczynski, M.; Oyevaar, M.H.; Pieters, R.T.; Westerterp, K.R.

    1987-01-01

    The synthesis of methanol from CO and H2 was executed in a gas-solid-solid trickle flow reactor. The reactor consisted of three tubular reactor sections with cooling sections in between. The catalyst was Cu on alumina, the adsorbent was a silica-alumina powder and the experimental range 498–523 K,

  4. On monitoring the tritium breeder in a lead-lithium cooled ceramic breeder (LLCB) module of the ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kapyshev, V., E-mail: kapyshev@nikiet.ru [Federal State Unitary Enterprise ' Dollezhal Research and Development Institute of Power Engineering' , PO Box 788, Moscow 101000 (Russian Federation); Kartashev, I.; Kovalenko, V.; Leshukov, A.; Poliksha, V.; Rasmerov, A.; Strebkov, Yu.; Yukhnov, N.; Vladimirova, N. [Federal State Unitary Enterprise ' Dollezhal Research and Development Institute of Power Engineering' , PO Box 788, Moscow 101000 (Russian Federation)

    2012-08-15

    The operation of a tritium breeder is a most process among engineering problems of DEMO. In this study, a design for monitoring tritium-breeding in the reactor is discussed. Additionally, a system for the experimental estimation of the tritium-breeding ratio (TBR) and the tritium-breeding dynamics in a lead-lithium cooled ceramic breeder (LLCB) test module used in the ITER is proposed. The systems are based on tritium and neutron-flux measurements under the ITER plasma D-T experiments and the use of lithium ortho-silicate and lithium carbonate samples and neutron detectors. Different lithum-6 and lithium-7 isotope contents in the samples are used to measure neutron spectrum. The samples and detectors are delivered in containers to the test breeder module (TBM) on a monitor channel connecting the TBM to an operating zone of the ITER. The tritium content in the samples is measured in a laboratory by the liquid scintillation method. Pneumatic control is used to deliver the samples to the TBM and to extract the samples using the channel during plasma-operational pauses. Neutron calculation is performed to estimate the tritium content in the samples and the heat distribution in the materials of the channel under reactor irradiation. A measurement accuracy of the tritium content in the carbonate and orthosilicate samples can attain a level of 7% and 10%, respectively. The results of the channel-cooling calculation performed under the nominal operating conditions of the TBM (a plasma pulse) are presented in the paper.

  5. Overview of pool hydraulic design of Indian prototype fast breeder ...

    Indian Academy of Sciences (India)

    Computational Fluid Dynamics (CFD) plays a critical role in the design of pool type reactors and becomes an increasingly popular tool, thanks to the advancements in computing technology. In this paper, thermal hydraulic characteristics of a fast breeder reactor, design limits and challenging thermal hydraulic investigations ...

  6. A contribution to the analysis of the thermal behaviour of Fast Breeder fuel rods with UO{sub 2}-PuO{sub 2} fuel; Contribucion al analisis del comportamiento termico de las barras combustibles de UO{sub 2}-PuO{sub 2} de los reactores rapidos

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Jimenez, J.; Elbel, H.

    1977-07-01

    The fuel of Fast Breeder Reactors which consists of Uranium and Plutonium dioxide is mainly characterized by the amount and distribution of void volume and Plutonium and the amount of oxygen. Irradiation experiments carried out with this fuel have shown that initial structure of the fuel pellet is subjected to large changes during operation. These are consequences of the radial and axial temperature gradients within the fuel rods. (Author) 54 refs.

  7. Tridimensional ultrasonic images analysis for the in service inspection of fast breeder reactors; Analyse d'images tridimensionnelles ultrasonores pour l'inspection en service des reacteurs a neutrons rapides

    Energy Technology Data Exchange (ETDEWEB)

    Dancre, M

    1999-11-01

    Tridimensional image analysis provides a set of methods for the intelligent extraction of information in order to visualize, recognize or inspect objects in volumetric images. In this field of research, we are interested in algorithmic and methodological aspects to extract surface visual information embedded in volume ultrasonic images. The aim is to help a non-acoustician operator, possibly the system itself, to inspect surfaces of vessel and internals in Fast Breeder Reactors (FBR). Those surfaces are immersed in liquid metal, what justifies the ultrasonic technology choice. We expose firstly a state of the art on the visualization of volume ultrasonic images, the methods of noise analysis, the geometrical modelling for surface analysis and finally curves and surfaces matching. These four points are then inserted in a global analysis strategy that relies on an acoustical analysis (echoes recognition), an object analysis (object recognition and reconstruction) and a surface analysis (surface defects detection). Few literature can be found on ultrasonic echoes recognition through image analysis. We suggest an original method that can be generalized to all images with structured and non-structured noise. From a technical point of view, this methodology applied to echoes recognition turns out to be a cooperative approach between morphological mathematics and snakes (active contours). An entropy maximization technique is required for volumetric data binarization. (author)

  8. Compatibility of sodium with ceramic oxides employed in nuclear reactors; Compatibilidad del sodio con oxidos ceramicos utilizados en reactores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Acena Moreno, V.

    1981-07-01

    This work is a review of experiments carried out up to the present time on the corrosion and compatibility of ceramic oxides with liquid sodium at temperatures corresponding to those in fast breeder reactors. The review also includes the results of a thermo-dynamic/liquid sodium reactions. The exercise has been conducted with a view to effecting experimental studies in the future. (Author)

  9. Tokamak experimental power reactor conceptual design. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    1976-08-01

    A conceptual design has been developed for a tokamak Experimental Power Reactor to operate at net electrical power conditions with a plant capacity factor of 50 percent for 10 years. The EPR operates in a pulsed mode at a frequency of approximately 1/min., with an approximate 75 percent duty cycle, is capable of producing approximately 72 MWe and requires 42 MWe. The annual tritium consumption is 16 kg. The EPR vacuum chamber is 6.25 m in major radius and 2.4 m in minor radius, is constructed of 2-cm thick stainless steel, and has 2-cm thick detachable, beryllium-coated coolant panels mounted on the interior. An 0.28 m stainless steel blanket and a shield ranging from 0.6 to 1.0 m surround the vacuum vessel. The coolant is H/sub 2/O. Sixteen niobium-titanium superconducting toroidal-field coils provide a field of 10 T at the coil and 4.47 T at the plasma. Superconducting ohmic-heating and equilibrium-field coils provide 135 V-s to drive the plasma current. Plasma heating is accomplished by 12 neutral beam-injectors, which provide 60 MW. The energy transfer and storage system consists of a central superconducting storage ring, a homopolar energy storage unit, and a variety of inductor-converters.

  10. Laser fusion driven breeder design study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Berwald, D.H.; Massey, J.V.

    1980-12-01

    The results of the Laser Fusion Breeder Design Study are given. This information primarily relates to the conceptual design of an inertial confinement fusion (ICF) breeder reactor (or fusion-fission hybrid) based upon the HYLIFE liquid metal wall protection concept developed at Lawrence Livermore National Laboratory. The blanket design for this breeder is optimized to both reduce fissions and maximize the production of fissile fuel for subsequent use in conventional light water reactors (LWRs). When the suppressed fission blanket is compared with its fast fission counterparts, a minimal fission rate in the blanket results in a unique reactor safety advantage for this concept with respect to reduced radioactive inventory and reduced fission product decay afterheat in the event of a loss-of-coolant-accident.

  11. Integral Reactor Containment Condensation Model and Experimental Validation

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Qiao [Oregon State Univ., Corvallis, OR (United States); Corradini, Michael [Univ. of Wisconsin, Madison, WI (United States)

    2016-05-02

    This NEUP funded project, NEUP 12-3630, is for experimental, numerical and analytical studies on high-pressure steam condensation phenomena in a steel containment vessel connected to a water cooling tank, carried out at Oregon State University (OrSU) and the University of Wisconsin at Madison (UW-Madison). In the three years of investigation duration, following the original proposal, the planned tasks have been completed: (1) Performed a scaling study for the full pressure test facility applicable to the reference design for the condensation heat transfer process during design basis accidents (DBAs), modified the existing test facility to route the steady-state secondary steam flow into the high pressure containment for controllable condensation tests, and extended the operations at negative gage pressure conditions (OrSU). (2) Conducted a series of DBA and quasi-steady experiments using the full pressure test facility to provide a reliable high pressure condensation database (OrSU). (3) Analyzed experimental data and evaluated condensation model for the experimental conditions, and predicted the prototypic containment performance under accidental conditions (UW-Madison). A film flow model was developed for the scaling analysis, and the results suggest that the 1/3 scaled test facility covers large portion of laminar film flow, leading to a lower average heat transfer coefficient comparing to the prototypic value. Although it is conservative in reactor safety analysis, the significant reduction of heat transfer coefficient (50%) could under estimate the prototypic condensation heat transfer rate, resulting in inaccurate prediction of the decay heat removal capability. Further investigation is thus needed to quantify the scaling distortion for safety analysis code validation. Experimental investigations were performed in the existing MASLWR test facility at OrST with minor modifications. A total of 13 containment condensation tests were conducted for pressure

  12. Development of self-cooled liquid metal breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Malang, S.; Tillack, M.S. [comps.; Barleon, L.; Baumgaertner, S.; Borgstedt, H.U.; Buehler, L.; Buerkle, G.; Dammel, F.; Feuerstein, H.; Fischer, U.; Gabel, K.; Gerhardt, H.; Glasbrenner, H.; Heider, T.; Jordan, T.; Kleefeldt, K.; Kleykamp, H.; Lindau, R.; Moeslang, A.; Norajitra, F.; Reimann, G.; Reimann, J.; Riesch-Oppermann, H.; Ritzhaupt-Kleissl, H.J.; Schleisiek, K.; Schmitz, G.; Schnauder, H.; Stieglitz, R.; Tellini, B.; Tsige-Tamirat, H.

    1995-11-01

    The development of liquid metal breeder blankets for fusion reactors has been performed in the Forschungszentrum Karlsruhe as a part of the European fusion blanket development program with the aim to select the two most promising concepts in 1995 for further development. In this report are described the designs of self-cooled blankets together with the results of the accompanying R and D program of the years 1992-1995. The program includes design studies as well as theoretical and experimental work in the fields of neutronics, magneto-hydrodynamics, thermohydraulics, mechanical stresses, compatibility and purification of lead-lithium, tritium extraction and control, safety, reliability, electrical insulating coatings, and fabrication technologies for blanket segments. (orig.) 250 refs.

  13. Introduction of Nuclear Instrumentations and Radiation Measurements in Experimental Fast Reactor 「JOYO」

    OpenAIRE

    大戸 敏弘; 鈴木 惣十

    1992-01-01

    This report introduces the nuclear instrumentation system and major R&D (research and development) activities using radiation measurement techniques in Experimental Fast Reactor "JOYO". In the introduction of the nuclear instrumentation system, following items are described; (1)system function (2)roles as a reactor plant equipment (3)specifications and charactelistics of neutron detectors, (4)construction and layout of the system. For reactor dosimetry at various irradiation tests and surveil...

  14. A comparison of radioactive waste from first generation fusion reactors and fast fission reactors with actinide recycling

    Energy Technology Data Exchange (ETDEWEB)

    Koch, M.; Kazimi, M.S.

    1991-04-01

    Limitations of the fission fuel resources will presumably mandate the replacement of thermal fission reactors by fast fission reactors that operate on a self-sufficient closed fuel cycle. This replacement might take place within the next one hundred years, so the direct competitors of fusion reactors will be fission reactors of the latter rather than the former type. Also, fast fission reactors, in contrast to thermal fission reactors, have the potential for transmuting long-lived actinides into short-lived fission products. The associated reduction of the long-term activation of radioactive waste due to actinides makes the comparison of radioactive waste from fast fission reactors to that from fusion reactors more rewarding than the comparison of radioactive waste from thermal fission reactors to that from fusion reactors. Radioactive waste from an experimental and a commercial fast fission reactor and an experimental and a commercial fusion reactor has been characterized. The fast fission reactors chosen for this study were the Experimental Breeder Reactor 2 and the Integral Fast Reactor. The fusion reactors chosen for this study were the International Thermonuclear Experimental Reactor and a Reduced Activation Ferrite Helium Tokamak. The comparison of radioactive waste parameters shows that radioactive waste from the experimental fast fission reactor may be less hazardous than that from the experimental fusion reactor. Inclusion of the actinides would reverse this conclusion only in the long-term. Radioactive waste from the commercial fusion reactor may always be less hazardous than that from the commercial fast fission reactor, irrespective of the inclusion or exclusion of the actinides. The fusion waste would even be far less hazardous, if advanced structural materials, like silicon carbide or vanadium alloy, were employed.

  15. Review of accident analyses of RB experimental reactor

    Directory of Open Access Journals (Sweden)

    Pešić Milan P.

    2003-01-01

    Full Text Available The RB reactor is a uranium fuel heavy water moderated critical assembly that has been put and kept in operation by the VTNCA Institute of Nuclear Sciences, Belgrade, Serbia and Montenegro, since April 1958. The first complete Safety Analysis Report of the RB reactor was prepared in 1961/62 yet, the first accident analysis had been made in late 1958 with the aim to examine a power transition and the total equivalent doses received by the staff during the reactivity accident that occurred on October 15, 1958. Since 1960, the RB reactor has been modified a few times. Beside the initial natural uranium metal fuel rods, new types of fuel (TVR-S types of Russian origin consisting of 2% enriched uranium metal and 80% enriched UO2 dispersed in aluminum matrix, have been available since 1962 and 1976 respectively. Modifications of the control and safety systems of the reactor were made occasionally. Special reactor cores were designed and constructed using all three types of fuel elements as well as the coupled fast-thermal ones. The Nuclear Safety Committee of the VINĆA Institute, an independent regulatory body, approved for usage all these modifications of the RB reactor on the basis of the Preliminary Safety Analysis Reports, which, beside proposed technical modifications and new regulation rules, included safety analyses of various possible accidents. A special attention was given (and a new safety methodology was proposed to thorough analyses of the design-based accidents related to the coupled fast-thermal cores that included central zones of the reactor filled by the fuel elements without any moderator. In this paper, an overview of some accidents, methodologies and computation tools used for the accident analyses of the RB reactor is given.

  16. A reverse flow catalytic membrane reactor for the production of syngas: an experimental study

    NARCIS (Netherlands)

    Smit, J.; Bekink, G.J.; van Sint Annaland, M.; Kuipers, J.A.M.

    2005-01-01

    In this paper experimental results are presented for a demonstration unit of a recently proposed novel integrated reactor concept (Smit et. al., 2005) for the partial oxidation of natural gas to syngas (POM), namely a Reverse Flow Catalytic Membrane Reactor (RFCMR). Natural gas has great potential

  17. Experimental and simulated dosimetry of the university of Utah TRIGA reactor

    Science.gov (United States)

    Marble, Benjamin James

    Simulated neutron and gamma transport enable the gamma dose to be estimated at the surface of the University of Utah TRIGA Reactor UUTR pool. These results are benchmarked against experimental results for model verification. This model is useful for future licensing and possible reactor power upgrades. MCNP5 was utilized for the UUTR simulation and comparison with thermoluminescent detectors TLDs.

  18. Stress state dependence of in-reactor creep and swelling. Part 2: Experimental results

    Science.gov (United States)

    Hall, M. M., Jr.; Flinn, J. E.

    2010-01-01

    Irradiation creep constitutive equations, which were developed in Part I, are used here to analyze in-reactor creep and swelling data obtained ca. 1977-1979 as part of the US breeder reactor program. The equations were developed according to the principles of incremental continuum plasticity for the purpose of analyzing data obtained from a novel irradiation experiment that was conducted, in part, using Type 304 stainless steel that had been previously irradiated to significant levels of void swelling. Analyses of these data support an earlier observation that all stress states, whether tensile, compressive, shear or mixed, can affect both void swelling and interactions between irradiation creep and swelling. The data were obtained using a set of five unique multiaxial creep-test specimens that were designed and used for the first time in this study. The data analyses demonstrate that the constitutive equations derived in Part I provide an excellent phenomenological representation of the interactive creep and swelling phenomena. These equations provide nuclear power reactor designers and analysts with a first-of-its-kind structural analysis tool for evaluating irradiation damage-dependent distortion of complex structural components having gradients in neutron damage rate, temperature and stress state.

  19. An evaluation of alternative reactor vessel cutting technologies for the experimental boiling water reactor at Argonne National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Boing, L.E.; Henley, D.R. (Argonne National Lab., IL (USA)); Manion, W.J.; Gordon, J.W. (Nuclear Energy Services, Inc., Danbury, CT (USA))

    1989-12-01

    Metal cutting techniques that can be used to segment the reactor pressure vessel of the Experimental Boiling Water Reactor (EBWR) at Argonne National Laboratory (ANL) have been evaluated by Nuclear Energy Services. Twelve cutting technologies are described in terms of their ability to perform the required task, their performance characteristics, environmental and radiological impacts, and cost and schedule considerations. Specific recommendations regarding which technology should ultimately be used by ANL are included. The selection of a cutting method was the responsibility of the decommissioning staff at ANL, who included a relative weighting of the parameters described in this document in their evaluation process. 73 refs., 26 figs., 69 tabs.

  20. Plutonium Worlds. Fast Breeders, Systems Analysis and Computer Simulation in the Age of Hypotheticality

    Directory of Open Access Journals (Sweden)

    Sebastian Vehlken

    2014-09-01

    Full Text Available This article examines the media history of one of the hallmark civil nuclear energy programs in Western Germany – the development of Liquid Metal Fast Breeder Reactor (LMFBR technology. Promoted as a kind of perpetuum mobile of the Atomic Age, the "German Manhattan Project" not only imported big science thinking. In its context, nuclear technology was also put forth as an avantgarde of scientific inquiry, dealing with the most complex and critical technological endeavors. In the face of the risks of nuclear technology, German physicist Wolf Häfele thus announced a novel epistemology of "hypotheticality". In a context where traditional experimental engineering strategies became inappropiate, he called for the application of advanced media technologies: Computer Simulations (CS and Systems Analysis (SA generated computerized spaces for the production of knowledge. In the course of the German Fast Breeder program, such methods had a twofold impact. One the one hand, Häfele emphazised – as the "father of the German Fast Breeder" – the utilization of CS for the actual planning and construction of the novel reactor type. On the other, namely as the director of the department of Energy Systems at the International Institute for Applied Systems Analysis (IIASA, Häfele advised SA-based projections of energy consumption. These computerized scenarios provided the rationale for the conception of Fast Breeder programs as viable and necessary alternative energy sources in the first place. By focusing on the role of the involved CS techniques, the paper thus investigates the intertwined systems thinking of nuclear facilities’s planning and construction and the design of large-scale energy consumption and production scenarios in the 1970s and 1980s, as well as their conceptual afterlives in our contemporary era of computer simulation.

  1. COMPUTATIONAL AND EXPERIMENTAL MODELING OF SLURRY BUBBLE COLUMN REACTORS

    Energy Technology Data Exchange (ETDEWEB)

    Paul C.K. Lam; Isaac K. Gamwo; Dimitri Gidaspow

    2002-05-01

    The objective of this study was to develop a predictive experimentally verified computational fluid dynamics (CFD) model for gas-liquid-solid flow. A three dimensional transient computer code for the coupled Navier-Stokes equations for each phase was developed and is appended in this report. The principal input into the model is the viscosity of the particulate phase which was determined from a measurement of the random kinetic energy of the 800 micron glass beads and a Brookfield viscometer. The details are presented in the attached paper titled ''CFD Simulation of Flow and Turbulence in a Slurry Bubble Column''. This phase of the work is in press in a referred journal (AIChE Journal, 2002) and was presented at the Fourth International Conference on Multiphase Flow (ICMF 2001) in New Orleans, May 27-June 1, 2001 (Paper No. 909). The computed time averaged particle velocities and concentrations agree with Particle Image Velocimetry (PIV) measurements of velocities and concentrations, obtained using a combination of gamma-ray and X-ray densitometers, in a slurry bubble column, operated in the bubbly-coalesced fluidization regime with continuous flow of water. Both the experiment and the simulation show a down-flow of particles in the center of the column and up-flow near the walls and nearly uniform particle concentration. Normal and shear Reynolds stresses were constructed from the computed instantaneous particle velocities. The PIV measurement and the simulation produced instantaneous particle velocities. The PIV measurement and the simulation produced similar nearly flat horizontal profiles of turbulent kinetic energy of particles. To better understand turbulence we studied fluidization in a liquid-solid bed. This work was also presented at the Fourth International Conference on Multiphase Flow (ICMF 2001, Paper No. 910). To understand turbulence in risers, measurements were done in the IIT riser with 530 micron glass beads using a PIV

  2. Experimental study of radiation dose rate at different strategic points of the BAEC TRIGA Research Reactor.

    Science.gov (United States)

    Ajijul Hoq, M; Malek Soner, M A; Salam, M A; Haque, M M; Khanom, Salma; Fahad, S M

    2017-12-01

    The 3MW TRIGA Mark-II Research Reactor of Bangladesh Atomic Energy Commission (BAEC) has been under operation for about thirty years since its commissioning at 1986. In accordance with the demand of fundamental nuclear research works, the reactor has to operate at different power levels by utilizing a number of experimental facilities. Regarding the enquiry for safety of reactor operating personnel and radiation workers, it is necessary to know the radiation level at different strategic points of the reactor where they are often worked. In the present study, neutron, beta and gamma radiation dose rate at different strategic points of the reactor facility with reactor power level of 2.4MW was measured to estimate the rising level of radiation due to its operational activities. From the obtained results high radiation dose is observed at the measurement position of the piercing beam port which is caused by neutron leakage and accordingly, dose rate at the stated position with different reactor power levels was measured. This study also deals with the gamma dose rate measurements at a fixed position of the reactor pool top surface for different reactor power levels under both Natural Convection Cooling Mode (NCCM) and Forced Convection Cooling Mode (FCCM). Results show that, radiation dose rate is higher for NCCM in compared with FCCM and increasing with the increase of reactor power. Thus, concerning the radiological safety issues for working personnel and the general public, the radiation dose level monitoring and the experimental analysis performed within this paper is so much effective and the result of this work can be utilized for base line data and code verification of the nuclear reactor. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Initial design and test of the tritium breeder monitoring system for the lead-lithium cooled ceramic breeder (LLCB) module of the ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kapyshev, V., E-mail: kapyshev@nikiet.ru [Federal State Unitary Enterprise “Dollezhal Research and Development Institute of Power Engineering”, PO Box 788, Moscow 101000 (Russian Federation); Danilov, I.; Kartashev, I.; Kovalenko, V.; Leshukov, A.; Poliksha, V.; Razmerov, A.; Strebkov, Yu.; Sviridenko, M.; Trusova, E.; Vladimirova, N. [Federal State Unitary Enterprise “Dollezhal Research and Development Institute of Power Engineering”, PO Box 788, Moscow 101000 (Russian Federation); Kalashnikov, A. [Rosatom (Russian Federation)

    2013-10-15

    Highlights: • We propose a system for measurement of tritium-breeding dynamics in module of the ITER. • Lithium carbonate sensors and neutron detectors are used for the measurements. • The sensors and detectors are irradiated by neutrons under ITER plasma operations. • A pneumatic concept is suggested for conveying of the samples in the module. • The results of the tritium measurements in the sensors after irradiation are discussed. -- Abstract: The demonstration of a tritium breeder is an important part of an ITER mission. A concept for an experimental estimation of the tritium-breeding ratio (TBR) and the tritium-breeding dynamics in a test breeder module (TBM) of ITER has been developed. A system for the experimental estimation of the values is proposed for the lead–lithium cooled ceramic breeder (LLCB) TBM of ITER. The system is based on tritium breeder and neutron flux measurements under ITER plasma D-T experiments and the use of lithium carbonate sensors and neutron detectors. Three capsules with lithium carbonate (Li{sub 2}CO{sub 3}) containing different relative abundances of lithum-6 and lithium-7 (Li-6/Li-7 ratios of that found in nature: 1/1 and 9/1) and three capsules with neutron detectors are placed in a container. The low-level activities of the structural materials of the container and the capsules are used to prevent operation in a hot cell after the reactor irradiation of the container. For the delivery/withdrawal of the containers into/from the TBM, a pneumatic concept is suggested with a monitor channel connecting the TBM and an operating zone for conveying the containers in the TBM before the pulse and extracting them after the pulse. The initial design of the container with the capsules for the samples and the channel part in the TBM are presented in this paper. A laboratory facility for the investigation of the pneumatic parameters and the container moving in the channel is proposed. Neutron calculation is performed to estimate

  4. ITER solid breeder blanket materials database

    Energy Technology Data Exchange (ETDEWEB)

    Billone, M.C. [Argonne National Lab., IL (United States); Dienst, W. [Kernforschungszentrum Karlsruhe GmbH (Germany). Inst. fuer Material- und Festkoerperforschung; Flament, T. [CEA Centre d`Etudes de Fontenay-aux-Roses (France). Commissariat A L`Energie Atomique; Lorenzetto, P. [NET Team, Garching (Germany); Noda, K. [Japan Atomic Energy Research Inst., Takai, Ibaraki, (Japan); Roux, N. [CEA Centre d`Etudes et de Recherches Les Materiaux (France). Commissariat a L`Energie Atomique

    1993-11-01

    The databases for solid breeder ceramics (Li{sub 2},O, Li{sub 4}SiO{sub 4}, Li{sub 2}ZrO{sub 3} and LiAlO{sub 2}) and beryllium multiplier material are critically reviewed and evaluated. Emphasis is placed on physical, thermal, mechanical, chemical stability/compatibility, tritium, and radiation stability properties which are needed to assess the performance of these materials in a fusion reactor environment. Correlations are selected for design analysis and compared to the database. Areas for future research and development in blanket materials technology are highlighted and prioritized.

  5. The Jules Horowitz reactor (JHR), a European material testing reactor (MTR), with extended experimental capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Ballagny, A.; Bergamaschi, Y.; Bouilloux, Y.; Bravo, X.; Guigon, B.; Rommens, M.; Tremodeux, P. [CEA Cadarache, Dir. de l' Energie Nucleaire DEN, 13 - Saint-Paul-lez-Durance (France)]|[CEA Saclay Dir. de l' Energie Nucleaire DEN, 91 - Gif sur Yvette (France)

    2003-07-01

    The Jules Horowitz Reactor (JHR) is the European MTR (Material Testing Reactor) designed to provide, after 2010, the necessary knowledge for keeping the existing power plants in operation and to design innovative reactors types with new objectives such as: minimizing the radioactive waste production, taking into account additional safety requirements, preventing risks of nuclear proliferation... To achieve such an ambitious objective. The JHR is designed with a high flexibility in order to satisfy the current demand from European industry, research and to be able to accommodate future requirements. The JHR will offer a wide range of performances and services in gathering, in a single site at Cadarache, all the necessary functionalities and facilities for an effective production of results: e.g. fuel fabrication laboratories, preparation of the instrumented devices, interpretation of the experiments, modelling. The JHR must rely on a top level scientific environment based on experts teams from CEA and EC and local universities. With a thermal flux of 7,4.10{sup 14} ncm{sup -2} s{sup -1} and a fast flux of 6,4.10{sup 14} ncm{sup -2}s{sup -1}, it is possible to carry out irradiation experiments on materials and fuels whatever the reactor type considered. It will also be possible to carry out locally, fast neutron irradiation to achieve damage effect up to 25 dpa/year. (dpa = displacement per atom.) The study of the fuels behavior under accidental conditions, from analytical experiments, on a limited amount of irradiated fuel, is a major objective of the project. These oriented safety tests are possible by taking into account specific requirements in the design of the facility such as the tightness level of the containment building, the addition of an alpha hot cell and a laboratory for on line fission products measurement. (authors)

  6. Liquid Metal Fast Breeder Reactors: a bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Raleigh, H.D. (ed.)

    1980-11-01

    This bibliography includes 5465 selected citations on LMFBR development. The citations were compiled from the DOE Energy Data Base covering the period January 1978 (EDB File No. 78R1087) through August 1980 (EDB File No. 80C79142). The references are to reports from the Department of Energy and its contractors, reports from other government or private organizations, and journal articles, books, conference papers, and monographs from US originators. Report citations are arranged alphanumerically by report number; nonreport literature citations are arranged chronologically. Corporate, Personal Author, Subject, and Report Number Indexes are provided in Volume 2.

  7. Liquid Metal Fast Breeder Reactors: a bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Raleigh, H.D. (ed.)

    1980-11-01

    This bibliogralphy includes 5465 selected citations on LMFBR development. The citations were compiled from the DOE Energy Data Base covering the period January 1978 (EDB File No. 78R1087) through August 1980 (EDB File No. 80C79142). The references are to reports from the Department of Energy and its contractors, reports from other government or private organizations, and journal articles, books, conference papers, and monographs from US originators. Report citations are arranged alphanumerically by report number; nonreport literature citations are arranged chronologically. Corporate, Personal Author, Subject, and Report Number Indexes are provided in Volume 2.

  8. ESTIMATION OF ROUTINE DISCHARGE OF RADIONUCLIDES ON POWER REACTOR EXPERIMENTAL RDE

    OpenAIRE

    Udiyani, P.M; Sri Kuntjoro

    2017-01-01

    Experimental power reactor (RDE) which is planned to be constructed by BATAN is a kind of High Temperature Gas Cooled Reactor (HTGR) with 10 MWth power. HTGR is a helium gas-cooled reactor with TRISO-coated fuel that is able to confine fission products remained in the core. Although the fission products released into the environment are very small, in order to comply the regulations the study about environmental radiation on normal or routine operation condition need to be performed. Estimati...

  9. Experimental Investigation of Biogas Reforming in Gliding Arc Plasma Reactors

    Directory of Open Access Journals (Sweden)

    P. Thanompongchart

    2014-01-01

    Full Text Available Biogas is an important renewable energy source. Its utilization is restricted to vicinity of farm areas, unless pipeline networks or compression facilities are established. Alternatively, biogas may be upgraded into synthetic gas via reforming reaction. In this work, plasma assisted reforming of biogas was investigated. A laboratory gliding arc plasma setup was developed. Effects of CH4/CO2 ratio (1, 2.33, 9, feed flow rate (16.67–83.33 cm3/s, power input (100–600 W, number of reactor, and air addition (0–60% v/v on process performances in terms of yield, selectivity, conversion, and energy consumption were investigated. High power inputs and long reaction time from low flow rates, or use of two cascade reactors were found to promote dry reforming of biogas. High H2 and CO yields can be obtained at low energy consumption. Presence of air enabled partial oxidation reforming that produced higher CH4 conversion, compared to purely dry CO2 reforming process.

  10. Experiments in the experimental fast reactor VENUS-F: The FREYA project; Experimentos en el reactor rapido experimental VENUS-F: El proyecto FREYA

    Energy Technology Data Exchange (ETDEWEB)

    Villamarin, D.; Becares, V.; Cano, D.; Gonzalez, E.

    2011-07-01

    Due to the high flexibility of operation of the reactor VENUS-E, FREYA project has two main objectives. The first is the end of the study monitoring techniques reactivity and serve as validation of simulation codes. The second objective is to provide experimental support for design and licensing MYRRHA / FASTEE and TRF in collaboration with CDTy LEADER projects of the 7th Framework Programme of the EU.

  11. Advanced Safeguards Approaches for New Fast Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Durst, Philip C.; Therios, Ike; Bean, Robert; Dougan, A.; Boyer, Brian; Wallace, Rick L.; Ehinger, Michael H.; Kovacic, Don N.; Tolk, K.

    2007-12-15

    This third report in the series reviews possible safeguards approaches for new fast reactors in general, and the ABR in particular. Fast-neutron spectrum reactors have been used since the early 1960s on an experimental and developmental level, generally with fertile blanket fuels to “breed” nuclear fuel such as plutonium. Whether the reactor is designed to breed plutonium, or transmute and “burn” actinides depends mainly on the design of the reactor neutron reflector and the whether the blanket fuel is “fertile” or suitable for transmutation. However, the safeguards issues are very similar, since they pertain mainly to the receipt, shipment and storage of fresh and spent plutonium and actinide-bearing “TRU”-fuel. For these reasons, the design of existing fast reactors and details concerning how they have been safeguarded were studied in developing advanced safeguards approaches for the new fast reactors. In this regard, the design of the Experimental Breeder Reactor-II “EBR-II” at the Idaho National Laboratory (INL) was of interest, because it was designed as a collocated fast reactor with a pyrometallurgical reprocessing and fuel fabrication line – a design option being considered for the ABR. Similarly, the design of the Fast Flux Facility (FFTF) on the Hanford Site was studied, because it was a successful prototype fast reactor that ran for two decades to evaluate fuels and the design for commercial-scale fast reactors.

  12. Experimental and computational investigation of flow of pebbles in a pebble bed nuclear reactor

    Science.gov (United States)

    Khane, Vaibhav B.

    The Pebble Bed Reactor (PBR) is a 4th generation nuclear reactor which is conceptually similar to moving bed reactors used in the chemical and petrochemical industries. In a PBR core, nuclear fuel in the form of pebbles moves slowly under the influence of gravity. Due to the dynamic nature of the core, a thorough understanding about slow and dense granular flow of pebbles is required from both a reactor safety and performance evaluation point of view. In this dissertation, a new integrated experimental and computational study of granular flow in a PBR has been performed. Continuous pebble re-circulation experimental set-up, mimicking flow of pebbles in a PBR, is designed and developed. Experimental investigation of the flow of pebbles in a mimicked test reactor was carried out for the first time using non-invasive radioactive particle tracking (RPT) and residence time distribution (RTD) techniques to measure the pebble trajectory, velocity, overall/zonal residence times, flow patterns etc. The tracer trajectory length and overall/zonal residence time is found to increase with change in pebble's initial seeding position from the center towards the wall of the test reactor. Overall and zonal average velocities of pebbles are found to decrease from the center towards the wall. Discrete element method (DEM) based simulations of test reactor geometry were also carried out using commercial code EDEM(TM) and simulation results were validated using the obtained benchmark experimental data. In addition, EDEM(TM) based parametric sensitivity study of interaction properties was carried out which suggests that static friction characteristics play an important role from a packed/pebble beds structural characterization point of view. To make the RPT technique viable for practical applications and to enhance its accuracy, a novel and dynamic technique for RPT calibration was designed and developed. Preliminary feasibility results suggest that it can be implemented as a non

  13. Experimental investigation of a pilot-scale jet bubbling reactor for wet flue gas desulphurisation

    DEFF Research Database (Denmark)

    Zheng, Yuanjing; Kiil, Søren; Johnsson, Jan Erik

    2003-01-01

    In the present work, an experimental parameter study was conducted in a pilot-scale jet bubbling reactor for wet flue gas desulphurisation (FGD). The pilot plant is downscaled from a limestone-based, gypsum producing full-scale wet FGD plant. Important process parameters, such as slurry pH, inlet...... flue gas concentration of SO2, reactor temperature, and slurry concentration of Cl- have been varied. The degree of desulphurisation, residual limestone content of the gypsum, liquid phase concentrations, and solids content of the slurry were measured during the experimental series. The SO2 removal...

  14. Validation of High-Fidelity Reactor Physics Models for Support of the KJRR Experimental Campaign in the Advanced Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nigg, David W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Nielsen, Joseph W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Norman, Daren R. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-07-01

    The Korea Atomic Energy Research Institute is currently in the process of qualifying a Low-Enriched Uranium fuel element design for the new Ki-Jang Research Reactor (KJRR). As part of this effort, a prototype KJRR fuel element was irradiated for several operating cycles in the Northeast Flux Trap of the Advanced Test Reactor (ATR) at the Idaho National Laboratory. The KJRR fuel element contained a very large quantity of fissile material (618g 235U) in comparison with historical ATR experiment standards (<1g 235U), and its presence in the ATR flux trap was expected to create a neutronic configuration that would be well outside of the approved validation envelope for the reactor physics analysis methods used to support ATR operations. Accordingly it was necessary, prior to high-power irradiation of the KJRR fuel element in the ATR, to conduct an extensive set of new low-power physics measurements with the KJRR fuel element installed in the ATR Critical Facility (ATRC), a companion facility to the ATR that is located in an immediately adjacent building, sharing the same fuel handling and storage canal. The new measurements had the objective of expanding the validation envelope for the computational reactor physics tools used to support ATR operations and safety analysis to include the planned KJRR irradiation in the ATR and similar experiments that are anticipated in the future. The computational and experimental results demonstrated that the neutronic behavior of the KJRR fuel element in the ATRC is well-understood, both in terms of its general effects on core excess reactivity and fission power distributions, its effects on the calibration of the core lobe power measurement system, as well as in terms of its own internal fission rate distribution and total fission power per unit ATRC core power. Taken as a whole, these results have significantly extended the ATR physics validation envelope, thereby enabling an entire new class of irradiation experiments.

  15. Vaccine-induced protection from egg production losses in commercial turkey breeder hens following experimental challenge with a triple-reassortant H3N2 avian influenza virus.

    Science.gov (United States)

    Kapczynski, Darrell R; Gonder, Eric; Liljebjelke, Karen; Lippert, Ron; Petkov, Daniel; Tilley, Becky

    2009-03-01

    Infections of avian influenza virus (AIV) in turkey breeder hens can cause a decrease in both egg production and quality, resulting in significant production losses. In North Carolina in 2003, a triple-reassortant H3N2 AIV containing human, swine, and avian gene segments was isolated from turkey breeder hens (A/turkey/NC/16108/03). This viral subtype was subsequently isolated from both turkeys and swine in Ohio in 2004, and in Minnesota in 2005, and was responsible for significant losses in turkey production. The objective of this study was to determine if currently available commercial, inactivated avian influenza H3 subtype oil-emulsion vaccines would protect laying turkey hens from egg production losses following challenge with the 2003 H3N2 field virus isolate from North Carolina. Laying turkey hens were vaccinated in the field with two injections of either a commercial monovalent (A/duck/Minnesota/79/79 [H3N4]) or autogenous bivalent (A/turkey/North Carolina/05 (H3N2)-A/turkey/North Carolina/88 [H1N1]) vaccine, at 26 and 30 wk of age, and subsequently challenged under BSL 3-Ag conditions at 32 wk of age. Vaccine-induced efficacy was determined as protection from a 50% decrease in egg production and from a decrease in egg quality within 21 days postchallenge. Results indicate that, following a natural route of challenge (eye drop and intranasal), birds vaccinated with the 2005 North Carolina H3N2 subtype were significantly protected from the drop in egg production observed in both the H3N4 vaccinated and sham-vaccinated hens. The results demonstrate that groups receiving vaccines containing either H3 subtype had a decreased number of unsettable eggs, increased hemagglutination inhibition titers following challenge, and decreased virus isolations from cloacal swabs as compared to the sham-vaccinated group. Phylogenetic analysis of the nucleotide sequence of the HA1 gene segment from the three H3 viruses used in these studies indicated that the two North Carolina

  16. Experimental characterization of slurry bubble-column reactor hydrodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Shollenberger, K.A.; Torczynski, J.R.; Jackson, N.B.; O`Hern, T.J.

    1997-09-01

    Sandia`s program to develop, implement, and apply diagnostics for hydrodynamic characterization of slurry bubble column reactors (SBCRs) at industrially relevant conditions is discussed. Gas liquid flow experiments are performed on an industrial scale. Gamma densitometry tomography (GDT) is applied to measure radial variations in gas holdup at one axial location. Differential pressure (DP) measurements are used to calculate volume averaged gas holdups along the axis of the vessel. The holdups obtained from DP show negligible axial variation for water but significant variations for oil, suggesting that the air water flow is fully developed (minimal flow variations in the axial direction) but that the air oil flow is still developing at the GDT measurement location. The GDT and DP gas holdup results are in good agreement for the air water flow but not for the air oil flow. Strong flow variations in the axial direction may be impacting the accuracy of one or both of these techniques. DP measurements are also acquired at high sampling frequencies (250 Hz) and are interpreted using statistical analyses to determine the physical mechanism producing each frequency component in the flow. This approach did not yield the information needed to determine the flow regime in these experiments. As a first step toward three phase material distribution measurements, electrical impedance tomography (EIT) and GDT are applied to a liquid solid flow to measure solids holdup. Good agreement is observed between both techniques and known values.

  17. The Effect of Low-Density Broiler Breeder Diets on Performance and Immune Status of their Offspring

    NARCIS (Netherlands)

    Enting, H.; Boersma, W.J.A.; Cornelissen, J.B.W.J.; Winden, van S.C.L.; Verstegen, M.W.A.; Aar, van de P.J.

    2007-01-01

    Effects of low-density broiler breeder diets on offspring performance and mortality were studied using 2,100 female and 210 male Cobb 500 breeders. Breeder treatments involved 4 experimental groups and a control group with normal density diets (ND, 2,600 kcal of AME/kg during rearing and 2,800 kcal

  18. Experimental Studies of NGNP Reactor Cavity Cooling System With Water

    Energy Technology Data Exchange (ETDEWEB)

    Corradini, Michael; Anderson, Mark; Hassan, Yassin; Tokuhiro, Akira

    2013-01-16

    This project will investigate the flow behavior that can occur in the reactor cavity cooling system (RCCS) with water coolant under the passive cooling-mode of operation. The team will conduct separate-effects tests and develop associated scaling analyses, and provide system-level phenomenological and computational models that describe key flow phenomena during RCCS operation, from forced to natural circulation, single-phase flow and two-phase flow and flashing. The project consists of the following tasks: Task 1. Conduct separate-effects, single-phase flow experiments and develop scaling analyses for comparison to system-level computational modeling for the RCCS standpipe design. A transition from forced to natural convection cooling occurs in the standpipe under accident conditions. These tests will measure global flow behavior and local flow velocities, as well as develop instrumentation for use in larger scale tests, thereby providing proper flow distribution among standpipes for decay heat removal. Task 2. Conduct separate-effects experiments for the RCCS standpipe design as two-phase flashing occurs and flow develops. As natural circulation cooling continues without an ultimate heat sink, water within the system will heat to temperatures approaching saturation , at which point two-phase flashing and flow will begin. The focus is to develop a phenomenological model from these tests that will describe the flashing and flow stability phenomena. In addition, one could determine the efficiency of phase separation in the RCCS storage tank as the two-phase flashing phenomena ensues and the storage tank vents the steam produced. Task 3. Develop a system-level computational model that will describe the overall RCCS behavior as it transitions from forced flow to natural circulation and eventual two-phase flow in the passive cooling-mode of operation. This modeling can then be used to test the phenomenological models developed as a function of scale.

  19. The CABRI fast neutron Hodoscope: Renovation, qualification program and first results following the experimental reactor restart

    Science.gov (United States)

    Chevalier, V.; Mirotta, S.; Guillot, J.; Biard, B.

    2018-01-01

    The CABRI experimental pulse reactor, located at the Cadarache nuclear research center, southern France, is devoted to the study of Reactivity Initiated Accidents (RIA). For the purpose of the CABRI International Program (CIP), managed and funded by IRSN, in the framework of an OECD/NEA agreement, a huge renovation of the facility has been conducted since 2003. The Cabri Water Loop was then installed to ensure prototypical Pressurized Water Reactor (PWR) conditions for testing irradiated fuel rods. The hodoscope installed in the CABRI reactor is a unique online fuel motion monitoring system, operated by IRSN and dedicated to the measurement of the fast neutrons emitted by the tested rod during the power pulse. It is one of the distinctive features of the CABRI reactor facility, which is operated by CEA. The system is able to determine the fuel motion, if any, with a time resolution of 1 ms and a spatial resolution of 3 mm. The hodoscope equipment has been upgraded as well during the CABRI facility renovation. This paper presents the main outcomes achieved with the hodoscope since October 2015, date of the first criticality of the CABRI reactor in its new Cabri Water Loop configuration. Results obtained during reactor commissioning phase functioning, either in steady-state mode (at low and high power, up to 23 MW) or in transient mode (start-up, possibly beyond 20 GW), are discussed.

  20. Design of a management information system for the Shielding Experimental Reactor ageing management

    Energy Technology Data Exchange (ETDEWEB)

    He Jie, E-mail: hejiejoe@163.co [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Xu Xianhong [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China)

    2010-01-15

    The problem of nuclear reactor ageing is a topic of increasing importance in nuclear safety recent years. Ageing management is usually implemented for reactors maintenance. In the practice, a large number of data and records need to be processed. However, there are few professional software applications that aid reactor ageing management, especially for research reactors. This paper introduces the design of a new web-based management information system (MIS), named the Shielding Experimental Reactor Ageing Management Information System (SERAMIS). It is an auxiliary means that helps to collect data, keep records, and retrieve information for a research reactor ageing management. The Java2 Enterprise Edition (J2EE) and network database techniques, such as three-tiered model, Model-View-Controller architecture, transaction-oriented operations, and JavaScript techniques, are used in the development of this system. The functionalities of the application cover periodic safety review (PSR), regulatory references, data inspection, and SSCs classification according to ageing management methodology. Data and examples are presented to demonstrate the functionalities. For future work, techniques of data mining will be employed to support decision-making.

  1. Antenna design for fast ion collective Thomson scattering diagnostic for the international thermonuclear experimental reactor

    DEFF Research Database (Denmark)

    Leipold, Frank; Furtula, Vedran; Salewski, Mirko

    2009-01-01

    Fast ion physics will play an important role for the international thermonuclear experimental reactor (ITER), where confined alpha particles will affect and be affected by plasma dynamics and thereby have impacts on the overall confinement. A fast ion collective Thomson scattering (CTS) diagnostic...

  2. Experimental research in neutron physic and thermal-hydraulic at the CDTN Triga reactor

    Energy Technology Data Exchange (ETDEWEB)

    Mesquita, Amir Z.; Souza, Rose Mary G.P.; Ferreira, Andrea V.; Pinto, Antonio J.; Costa, Antonio C.L.; Rezende, Hugo C., E-mail: amir@cdtn.b, E-mail: souzarm@cdtn.b, E-mail: avf@cdtn.b, E-mail: ajp@cdtn.b, E-mail: aclc@cdtn.b, E-mail: hcr@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    The IPR-R1 TRIGA (Training, Research, Isotopes production, General Atomics) at Nuclear Technology Development Center (CDTN) is a pool type reactor cooled by natural circulation of light water and an open surface. TRIGA reactors, developed by General Atomics (GA), are the most widely used research reactor in the world and characterized by inherent safety. The IPR-R1 is the only Brazilian nuclear research reactor available and able to perform experiments in which interaction between neutronic and thermal-hydraulic areas occurs. The IPR-R1 has started up on November 11th, 1960. At that time the maximum thermal power was 30 kW. The present forced cooling system was built in the 70th and the power was upgraded to 100 kW. Recently the core configuration and instrumentation was upgraded again to 250 kW at steady state, and is awaiting the license of CNEN to operate definitely at this new power. This paper describes the experimental research project carried out in the IPR-R1 reactor that has as objective evaluate the behaviour of the reactor operational parameters, and mainly to investigate the influence of temperature on the neutronic variables. The research was supported by Research Support Foundation of the State of Minas Gerais (FAPEMIG) and Brazilian Council for Scientific and Technological Development (CNPq). The research project meets the recommendations of the IAEA, for safety, modernization and development of strategic plan for research reactors utilization. This work is in line with the strategic objectives of Brazil, which aims to design and construct the Brazilian Multipurpose research Reactor (RMB). (author)

  3. Experimental estimation of moderator temperature coefficient of reactivity of the IPEN/MB-01 research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Rubens C. da; Bitelli, Ulysses D.; Mura, Luiz Ernesto C., E-mail: rubensrcs@usp.br, E-mail: ubitelli@ipen.br, E-mail: credidiomura@gmail.com [Universidade de Sao Paulo (PNV/POLI/USP), SP (Brazil). Arquitetura Naval e Departamento de Engenharia Oceanica; Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2017-07-01

    The aim of this article is to present the procedure for the experimental estimation of the Moderator Temperature Coefficient of Reactivity of the IPEN/MB-01 Research Reactor, a parameter that has an important role in the physics and the control operations of any reactor facility. At the experiment, the IPEN/MB-01 reactor went critical at the power of 1W (1% of its total power), and whose core configuration was 28 x 26 rectangular array of UO{sub 2} fuel rods, inside a light water (moderator) tank. In addition, there was a heavy water (D{sub 2}O) reflector installed in the West side of the core to obtain an adequate neutron reflection along the experiment. The moderator temperature was increased in steps of 4 °C, and the measurement of the mean moderator temperature was acquired using twelve calibrated thermocouples, placed around the reactor core. As a result, the mean value of -4.81 pcm/°C was obtained for such coefficient. The curves of ρ(T) (Reactivity x Temperature) and α{sup M}{sub T}(T)(Moderator Temperature Coefficient of Reactivity x Temperature) were developed using data from an experimental measurement of the integral reactivity curves through the Stable Period and Inverse Kinetics Methods, that was carried out at the reactor with the same core configuration. Such curves were compared and showed a very similar behavior between them. (author)

  4. Management of waste from the International Thermonuclear Experimental Reactor and from future fusion power plants

    Energy Technology Data Exchange (ETDEWEB)

    Broden, K. [Association EURATOM, Nykoeping (Sweden); Lindberg, M. [Association EURATOM, Nykoeping (Sweden); Nisan, S. [The NET Team, Garching (Germany); Rocco, P. [European Commission, Institute for Advanced Materials, Joint Research Centre, Ispra (Vatican City State, Holy See) (Italy); Zucchetti, M. [Energetics Department, Polytechnic of Turin, Corso Duca degli Abruzzi 24, I-10129 Torino (Italy); Taylor, N. [Association EURATOM-UKAEA, UKAEA Fusion, Culham, Abingdon, Oxfordshire, OX14 3DB (United Kingdom); Forty, C. [Association EURATOM-UKAEA, UKAEA Fusion, Culham, Abingdon, Oxfordshire, OX14 3DB (United Kingdom)

    1997-04-01

    An important inherent advantage of fusion would be the total absence of high-level radioactive spent fuel as produced in fission reactors. Fusion will, however, produce activated material containing both activation products and tritium. Part of the material may also contain chemically toxic substances. This paper describes methods that could be used to manage these materials and also methods to reduce or entirely eliminate the waste quantities. The results are based on studies for the International Thermonuclear Experimental Reactor and also for future fusion power station designs currently under investigation within the European programme on the safety and environmental assessment of fusion power, long-term. (orig.)

  5. The D&D of the Experimental Boiling Water Reactor (EBWR)

    Energy Technology Data Exchange (ETDEWEB)

    Fellhauer, C.R.; Boling, L.E.; Yule, T.J.; Bhattacharyya, S.K.

    1996-03-01

    Argonne National Laboratory has completed the D&D of the Experimental Boiling Water Reactor. The Project consisted of decontaminating and for packaging as radioactive waste the reactor vessel and internals, contaminated piping systems, miscellaneous tanks, pumps, and associated equipment. The D&D work involved dismantling process equipment and associated plumbing, ductwork drain lines, etc., performing size reduction of reactor vessel internals in the fuel pool, packaging and manifesting all radioactive and mixed waste, and performing a thorough survey of the facility after the removal of activated and contaminated material. Non-radioactive waste was disposed of in the ANL-E landfill or recycled. In January 1996 the EBWR facility was formally decommissioned and transferred from EM-40 to EM-30. This paper will discuss the details of this ten year effort.

  6. On the possibility of experimentally confirming the hypothesis of reactor antineutrino passage into a sterile state

    Science.gov (United States)

    Serebrov, A. P.; Fomin, A. K.; Zinov'ev, V. G.; Loginov, Yu. E.; Onegin, M. S.; Gagarskiy, A. M.; Petrov, G. A.; Solovei, V. A.; Chernyi, A. V.; Zherebtsov, O. M.; Martem'yanov, V. P.; Tsinoev, V. G.; Tarasenkov, V. G.; Aleshin, V. I.; Petelin, A. L.; Pavlov, S. V.; Svyatkin, M. N.; Izhutov, A. L.; Sazontov, S. A.; Ryazanov, D. K.; Gromov, M. O.; Khramkov, N. S.; Rykalin, V. I.

    2013-07-01

    The "Neutrino-4" experiment for the 100-MW SM-3 reactor has been developed with the aim of testing the reactor antineutrino anomaly at Petersburg Nuclear Physics Institute. The advantages of this reactor for studying the antineutrino anomaly are (i) a low background level and (ii) small dimensions (35 × 42 × 42 cm) of the active zone. Operation of a position-sensitive antineutrino detector comprising five working sections and moving so as to cover a region of distances within 6-13 m from the active zone has been simulated by the Monte-Carlo method. The range of experimental sensitivity with respect to the oscillation parameters Δ m 2 and sin22θ is determined, which will make it possible to confirm the hypothesis of antineutrino oscillations into a sterile state.

  7. Experimental investigation of a new method for advanced fast reactor shutdown cooling

    Science.gov (United States)

    Pakholkov, V. V.; Kandaurov, A. A.; Potseluev, A. I.; Rogozhkin, S. A.; Sergeev, D. A.; Troitskaya, Yu. I.; Shepelev, S. F.

    2017-07-01

    We consider a new method for fast reactor shutdown cooling using a decay heat removal system (DHRS) with a check valve. In this method, a coolant from the decay heat exchanger (DHX) immersed into the reactor upper plenum is supplied to the high-pressure plenum and, then, inside the fuel subassemblies (SAs). A check valve installed at the DHX outlet opens by the force of gravity after primary pumps (PP-1) are shut down. Experimental studies of the new and alternative methods of shutdown cooling were performed at the TISEY test facility at OKBM. The velocity fields in the upper plenum of the reactor model were obtained using the optical particle image velocimetry developed at the Institute of Applied Physics (Russian Academy of Sciences). The study considers the process of development of natural circulation in the reactor and the DHRS models and the corresponding evolution of the temperature and velocity fields. A considerable influence of the valve position in the displacer of the primary pump on the natural circulation of water in the reactor through the DHX was discovered (in some modes, circulation reversal through the DHX was obtained). Alternative DHRS designs without a shell at the DHX outlet with open and closed check valve are also studied. For an open check valve, in spite of the absence of a shell, part of the flow is supplied through the DHX pipeline and then inside the SA simulators. When simulating power modes of the reactor operation, temperature stratification of the liquid was observed, which increased in the cooling mode via the DHRS. These data qualitatively agree with the results of tests at BN-600 and BN-800 reactors.

  8. COMPUTATIONAL AND EXPERIMENTAL MODELING OF SLURRY BUBBLE COLUMN REACTORS

    Energy Technology Data Exchange (ETDEWEB)

    Paul Lam; Dimitri Gidaspow

    2000-09-01

    The objective if this study was to develop a predictive experimentally verified computational fluid dynamics (CFD) model for gas-liquid-solid flow. A three dimensional transient computer code for the coupled Navier-Stokes equations for each phase was developed. The principal input into the model is the viscosity of the particulate phase which was determined from a measurement of the random kinetic energy of the 800 micron glass beads and a Brookfield viscometer. The computed time averaged particle velocities and concentrations agree with PIV measurements of velocities and concentrations, obtained using a combination of gamma-ray and X-ray densitometers, in a slurry bubble column, operated in the bubbly-coalesced fluidization regime with continuous flow of water. Both the experiment and the simulation show a down-flow of particles in the center of the column and up-flow near the walls and nearly uniform particle concentration. Normal and shear Reynolds stresses were constructed from the computed instantaneous particle velocities. The PIV measurement and the simulation produced instantaneous particle velocities. The PIV measurement and the simulation produced similar nearly flat horizontal profiles of turbulent kinetic energy of particles. This phase of the work was presented at the Chemical Reaction Engineering VIII: Computational Fluid Dynamics, August 6-11, 2000 in Quebec City, Canada. To understand turbulence in risers, measurements were done in the IIT riser with 530 micron glass beads using a PIV technique. The results together with simulations will be presented at the annual meeting of AIChE in November 2000.

  9. Experimental and Kinetic Modeling Study of Ethyl Levulinate Oxidation in a Jet-Stirred Reactor

    KAUST Repository

    Wang, Jui-Yang

    2017-06-01

    A jet-stirred reactor was designed and constructed in the Clean Combustion Research Center (CCRC) at King Abdullah University of Science and Technology (KAUST); was validated with n-heptane, iso-octane oxidation and cyclohexene pyrolysis. Different configurations of the setup have been tested to achieve good agreement with results from the literature. Test results of the reactor indicated that installation of a pumping system at the downstream side in the experimental apparatus was necessary to avoid the reoccurrence of reactions in the sampling probe. Experiments in ethyl levulinate oxidation were conducted in the reactor under several equivalence ratios, from 600 to 1000 K, 1 bar and 2 s residence time. Oxygenated species detected included methyl vinyl ketone, levulinic acid and ethyl acrylate. Ethylene, methane, carbon monoxide, hydrogen, oxygen and carbon dioxide were further quantified with a gas chromatography, coupled with a flame ionization detector and a thermal conductivity detector. The ethyl levulinate chemical kinetic model was first developed by Dr. Stephen Dooley, Trinity College Dublin, and simulated under the same conditions, using the Perfect-Stirred Reactor code in Chemkin software. In comparing the simulation results with experimental data, some discrepancies were noted; predictions of ethylene production were not well matched. The kinetic model was improved by updating several classes of reactions: unimolecular decomposition, H-abstraction, C-C and C-O beta-scissions of fuel radicals. The updated model was then compared again with experimental results and good agreement was achieved, proving that the concerted eliminated reaction is crucial for the kinetic mechanism formulation of ethyl levulinate. In addition, primary reaction pathways and sensitivity analysis were performed to describe the role of molecular structure in combustion (800 and 1000 K for ethyl levulinate oxidation in the jet-stirred reactor).

  10. Results of theoretical and experimental studies of hydrodynamics of circulation loops in circulating fluidized bed reactors and systems with interconnected reactors

    Science.gov (United States)

    Ryabov, G. A.; Folomeev, O. M.; Sankin, D. A.; Melnikov, D. A.

    2015-02-01

    Problems of the calculation of circulation loops in circulating fluidized bed reactors and systems with interconnected reactors (polygeneration systems for the production of electricity, heat, and useful products and chemical cycles of combustion and gasification of solid fuels)are considered. A method has been developed for the calculation of circulation loop of fuel particles with respect to boilers with circulating fluidized bed (CFB) and systems with interconnected reactors with fluidized bed (FB) and CFB. New dependences for the connection between the fluidizing agent flow (air, gas, and steam) and performance of reactors and for the whole system (solids flow rate, furnace and cyclone pressure drops, and bed level in the riser) are important elements of this method. Experimental studies of hydrodynamics of circulation loops on the aerodynamic unit have been conducted. Experimental values of pressure drop of the horizontal part of the L-valve, which satisfy the calculated dependence, have been obtained.

  11. Experimentation on the anaerobic filter reactor for biogas production using rural domestic wastewater

    Science.gov (United States)

    Leju Celestino Ladu, John; Lü, Xi-wu; Zhong, Zhaoping

    2017-08-01

    The biogas production from anaerobic filter (AF) reactor was experimented in Taihu Lake Environmental Engineering Research Center of Southeast University, Wuxi, China. Two rounds of experimental operations were conducted in a laboratory scale at different Hydraulic retention time (HRT) and wastewater temperature. The biogas production rate during the experimentation was in the range of 4.63 to 11.78 L/d. In the first experimentation, the average gas production rate was 10.08 L/d, and in the second experimentation, the average gas production rate was 4.97 L/d. The experimentation observed the favorable Hydraulic Retention Time and wastewater temperature in AF was three days and 30.95°C which produced the gas concentration of 11.78 L/d. The HRT and wastewater temperature affected the efficiency of the AF process on the organic matter removal and nutrients removal as well. It can be deduced from the obtained results that HRT and wastewater temperature directly affects the efficiency of the AF reactor in biogas production. In conclusion, anaerobic filter treatment of organic matter substrates from the rural domestic wastewater increases the efficiency of the AF reactor on biogas production and gives a number of benefits for the management of organic wastes as well as reduction in water pollution. Hence, the operation of the AF reactor in rural domestic wastewater treatment can play an important element for corporate economy of the biogas plant, socio-economic aspects and in the development of effective and feasible concepts for wastewater management, especially for people in rural low-income areas.

  12. Fast reactor programme in India

    Indian Academy of Sciences (India)

    2015-09-04

    Sep 4, 2015 ... criteria; passive shutdown and decay heat removal systems; fast breeder reactors in India. PACS No. 28.41.−i. 1. ... water reactors, mainly pressurized heavy water reactors (PHWRs) to extract ∼10 GWe capacity for ..... commissioning phase and most of the supporting systems have been commissioned and.

  13. Fast reactor programme in India

    Indian Academy of Sciences (India)

    2015-09-04

    Sep 4, 2015 ... Home; Journals; Pramana – Journal of Physics; Volume 85; Issue 3. Fast reactor programme in India. P Chellapandi P R ... Keywords. Sodium fast reactor; design challenges; construction challenges; emerging safety criteria; passive shutdown and decay heat removal systems; fast breeder reactors in India.

  14. Studies of reactor irradiation effect on hydrogen isotope release from vanadium alloy V4Cr4Ti

    Energy Technology Data Exchange (ETDEWEB)

    Kulsartov, T. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Shestakov, V. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Chikhray, Y. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Kenzhin, Y. [Institute of Atomic Energy NNC RK, Krasnoarmeyskaya-str. 10, Kurchatov (Kazakhstan); Kolbayenkov, A. [Institute of Atomic Energy NNC RK, Krasnoarmeyskaya-str. 10, Kurchatov (Kazakhstan); Tazhibayeva, I. [National Nuclear Center, Lenin-str. 6, Kurchatov (Kazakhstan)

    2007-08-01

    Vanadium alloys are most promising materials being considered for lithium blanket-breeder in future fusion reactors. The primary reason for these stems from good combination of physical-mechanical and radiation properties of vanadium alloys. In operational conditions of fusion reactors the very important issue is behavior of vanadium alloy with respect to hydrogen isotopes under neutron and gamma irradiation. This paper shows results of the experimental studies of reactor irradiation influence on parameters of hydrogen release from vanadium alloys. Experiments were carried out for various levels of reactor irradiation and showed the effect of irradiation on parameters of hydrogen release from vanadium alloy V4Cr4Ti.

  15. Kinetics of vinyl acetate emulsion polymerization in a pulsed tubular reactor: comparison between experimental and simulation results

    OpenAIRE

    Sayer C.; Palma M.; Giudici R.

    2002-01-01

    A new reactor, the pulsed sieve plate column (PSPC), was developed to perform continuous emulsion polymerization reactions. This reactor combines the enhanced flexibility of tubular reactors with the mixing behavior provided by sieved plates and by the introduction of pulses that is important to prevent emulsion destabilization. The main objective of this work is to study the kinetics of vinyl acetate (VA) emulsion polymerization reactions performed in this PSPC. Therefore, both experimental ...

  16. High energy resolution characteristics on 14MeV neutron spectrometer for fusion experimental reactor

    Energy Technology Data Exchange (ETDEWEB)

    Iguchi, Tetsuo [Tokyo Univ., Tokai, Ibaraki (Japan). Nuclear Engineering Research Lab.; Takada, Eiji; Nakazawa, Masaharu

    1996-10-01

    A 14MeV neutron spectrometer suitable for an ITER-like fusion experimental reactor is now under development on the basis of a recoil proton counter telescope principle in oblique scattering geometry. To verify its high energy resolution characteristics, preliminary experiments are made for a prototypical detector system. The comparison results show reasonably good agreement and demonstrate the possibility of energy resolution of 2.5% in full width at half maximum for 14MeV neutron spectrometry. (author)

  17. An experimental study of hypervapotron structure in external reactor vessel cooling

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Yufeng; Zhang, Ming [State Nuclear Power Technology R& D Center (Beijing), Beijing (China); Hou, Fangxin [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing (China); Gao, Tianfang [State Nuclear Power Technology R& D Center (Beijing), Beijing (China); Chen, Peipei, E-mail: chenpeipei@snptc.com.cn [State Power Investment Group Corporation, Beijing (China)

    2016-07-15

    Highlights: • Experiments are performed to study the application of hypervapotron in ERVC design. • CHF experiments on two surfaces are conducted under different flow conditions. • Hypervapotron improves CHF performance by 40–60% compared with smooth surface. • Visualization shows fin structure removes vapor mushroom for better liquid supply. - Abstract: In vessel retention (IVR) is one of the key strategies for many advanced LWR designs to mitigate postulated severe accidents. The success of IVR substantially relies on external reactor vessel cooling (ERVC) by which the decay heat is removed from the melt core in the reactor vessel lower head. The main challenge of IVR is to provide an adequate safety margin of ERVC against critical heat flux (CHF) of subcooled flow boiling in the reactor lower head flow channel. Due to uncertainties in corium melt pool configuration, large CHF margin of ERVC is usually required by regulatory authorities to demonstrate reliability of severe accident mitigation methods. Various CHF enhancement designs have been proposed and studied in literature. In this paper, an experimental study of hypervapotron structure as a novel design to improve CHF performance of ERVC is conducted. Hypervapotron is chosen as one of the potential engineering options for International Thermonuclear Experimental Reactor (ITER) program as a divertor structure to remove highly intense heat from fusion chamber. This study is to conduct CHF experiments at typical PWR ERVC working conditions. The CHF experiments are performed in a 30 mm by 61 mm rectangular flow channel with a 200 mm long heated surface along the flow direction. Both smooth and hypervapotron surface are tested at various inclination angles of the test section to simulate various positions of the reactor lower head. The hypervapotron is found to have a 40–60% CHF improvement compared with the smooth surface. The high speed visualization indicates that hypervapotron is able to

  18. Advanced Reactors-Intermediate Heat Exchanger (IHX) Coupling: Theoretical Modeling and Experimental Validation

    Energy Technology Data Exchange (ETDEWEB)

    Utgikar, Vivek [Univ. of Idaho, Moscow, ID (United States); Sun, Xiaodong [The Ohio State Univ., Columbus, OH (United States); Christensen, Richard [The Ohio State Univ., Columbus, OH (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-12-29

    The overall goal of the research project was to model the behavior of the advanced reactorintermediate heat exchange system and to develop advanced control techniques for off-normal conditions. The specific objectives defined for the project were: 1. To develop the steady-state thermal hydraulic design of the intermediate heat exchanger (IHX); 2. To develop mathematical models to describe the advanced nuclear reactor-IHX-chemical process/power generation coupling during normal and off-normal operations, and to simulate models using multiphysics software; 3. To develop control strategies using genetic algorithm or neural network techniques and couple these techniques with the multiphysics software; 4. To validate the models experimentally The project objectives were accomplished by defining and executing four different tasks corresponding to these specific objectives. The first task involved selection of IHX candidates and developing steady state designs for those. The second task involved modeling of the transient and offnormal operation of the reactor-IHX system. The subsequent task dealt with the development of control strategies and involved algorithm development and simulation. The last task involved experimental validation of the thermal hydraulic performances of the two prototype heat exchangers designed and fabricated for the project at steady state and transient conditions to simulate the coupling of the reactor- IHX-process plant system. The experimental work utilized the two test facilities at The Ohio State University (OSU) including one existing High-Temperature Helium Test Facility (HTHF) and the newly developed high-temperature molten salt facility.

  19. Development of a membrane-assisted fluidized bed reactor - 2 - Experimental demonstration and modeling for the partial oxidation of methanol

    NARCIS (Netherlands)

    Deshmukh, S.A.R.K.; Laverman, J.A.; van Sint Annaland, M.; Kuipers, J.A.M.

    2005-01-01

    A small laboratory-scale membrane-assisted fluidized bed reactor (MAFBR) was constructed in order to experimentally demonstrate the reactor concept for the partial oxidation of methanol to formaldehyde. Methanol conversion and product selectivities were measured at various overall fluidization

  20. Experimental and Numerical Evaluation of the By-Pass Flow in a Catalytic Plate Reactor for Hydrogen Production

    DEFF Research Database (Denmark)

    Sigurdsson, Haftor Örn; Kær, Søren Knudsen

    2011-01-01

    Numerical and experimental study is performed to evaluate the reactant by-pass flow in a catalytic plate reactor with a coated wire mesh catalyst for steam reforming of methane for hydrogen generation. By-pass of unconverted methane is evaluated under different wire mesh catalyst width to reactor...

  1. Conceptual studies of toroidal field magnets for the tokamak experimental power reactor. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Buncher, B.R.; Chi, J.W.H.; Fernandez, R.

    1976-10-26

    This report documents the principal results of a Conceptual Design Study for the Superconducting Toroidal Field System for a Tokamak Experimental Power Reactor. Two concepts are described for peak operating fields at the windings of 8 tesla, and 12 tesla, respectively. The design and manufacturing considerations are treated in sufficient detail that cost and schedule estimates could be developed. Major uncertainties in the design are identified and their potential impact discussed, along with recommendations for the necessary research and development programs to minimize these uncertainties. The minimum dimensions of a sub-size test coil for experimental qualification of the full size design are developed and a test program is recommended.

  2. Experimental and kinetic modeling study of 3-methylheptane in a jet-stirred reactor

    KAUST Repository

    Karsenty, Florent

    2012-08-16

    Improving the combustion of conventional and alternative fuels in practical applications requires the fundamental understanding of large hydrocarbon combustion chemistry. The focus of the present study is on a high-molecular-weight branched alkane, namely, 3-methylheptane, oxidized in a jet-stirred reactor. This fuel, along with 2-methylheptane, 2,5-dimethylhexane, and n-octane, are candidate surrogate components for conventional diesel fuels derived from petroleum, synthetic Fischer-Tropsch diesel and jet fuels derived from coal, natural gas, and/or biomass, and renewable diesel and jet fuels derived from the thermochemical treatment of bioderived fats and oils. This study presents new experimental results along with a low- and high-temperature chemical kinetic model for the oxidation of 3-methylheptane. The proposed model is validated against these new experimental data from a jet-stirred reactor operated at 10 atm, over the temperature range of 530-1220 K, and for equivalence ratios of 0.5, 1, and 2. Significant effort is placed on the understanding of the effects of methyl substitution on important combustion properties, such as fuel reactivity and species formation. It was found that 3-methylheptane reacts more slowly than 2-methylheptane at both low and high temperatures in the jet-stirred reactor. © 2012 American Chemical Society.

  3. Experimental assessment of accident scenarios for the high temperature reactor fuel system

    Energy Technology Data Exchange (ETDEWEB)

    Seeger, O.; Avincola, V.; Bottomley, P.D.W.; Rondinella, V.V. [European Commission Joint Research Centre - Institute for Transuranium Elements (JRC-ITU) (Germany)

    2012-11-01

    The High Temperature Reactor (HTR) is an advanced reactor concept with particular safety features. Fuel elements are constituted by a graphite matrix containing sub-mm-sized fuel particles with TRISO (tri-isotropic) coating designed to provide high fission product retention. Passive safety features of the HTR include a low power density in the core compared to other reactor designs; this ensures sufficient heat transport in a loss of coolant accident scenario. The temperature during such events would not exceed 1600 C, remaining well below the melting point of the fuel. An experimental assessment of the fuel behaviour under severe accident conditions is necessary to confirm the fission product retention of TRISO coated particles and to validate relevant computer codes. Though helium is used as coolant for the HTR system, additional corrosion effects come into play in case of an in-leakage affecting the primary circuit. The experimental scope of the present work focuses on two key aspects associated with the HTR fuel safety. Fission product retention at high temperatures (up to {proportional_to}1800 C) is analyzed with the so-called cold finger apparatus (KueFA: Kuehlfinger-Apparatur), while the performance of HTR fuel elements in case of air/steam ingress accidents is assessed with a high temperature corrosion apparatus (KORA: Korrosions-Apparatur). (orig.)

  4. Experimental measurement and CFD simulation on the hydrodynamics of an internal-loop airlift reactor

    Directory of Open Access Journals (Sweden)

    Liew Shi Yan

    2017-01-01

    Full Text Available This paper concerns with the experimental measurement and computational fluid dynamics simulation on local hydrodynamics of a gas-liquid internal-loop airlift reactor. The aim of this work is to study the sensitivity of the drag models and the significance of considering the lift force on the predictive accuracy of the simulation. The experimental analysis was carried out using laser Doppler anemometry at three different heights (i.e. Y = 0.20 m, 0.30 m and 0.38 m across the riser and downcomerat volumetric flow rate of 0.30 m3/h to provide validation for the simulation results. A transient three-dimensional gasliquid internal-loop airlift reactor was carried out using FLUENT 16.2 by implementing the two-fluid model approach. The Eulerian-Eulerian multiphase and standard κ-ε dispersed turbulence model wereemployed in this study. Results suggest that the spherical drag model performed poorly and that the drag model governed by Rayleigh-Taylor shows promising accuracy in the prediction of overall mean axial liquid velocity. On the other hand, the consideration of lift model shows slightly improvement in accuracy. These findings may serve as a guidance for future scale-up and design of airlift reactor studies

  5. Experimental facility for development of high-temperature reactor technology: instrumentation needs and challenges

    Directory of Open Access Journals (Sweden)

    Sabharwall Piyush

    2015-01-01

    Full Text Available A high-temperature, multi-fluid, multi-loop test facility is under development at the Idaho National Laboratory for support of thermal hydraulic materials, and system integration research for high-temperature reactors. The experimental facility includes a high-temperature helium loop, a liquid salt loop, and a hot water/steam loop. The three loops will be thermally coupled through an intermediate heat exchanger (IHX and a secondary heat exchanger (SHX. Research topics to be addressed include the characterization and performance evaluation of candidate compact heat exchangers such as printed circuit heat exchangers (PCHEs at prototypical operating conditions. Each loop will also include an interchangeable high-temperature test section that can be customized to address specific research issues associated with each working fluid. This paper also discusses needs and challenges associated with advanced instrumentation for the multi-loop facility, which could be further applied to advanced high-temperature reactors. Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integral System Test (ARTIST facility. A preliminary design configuration of the ARTIST facility will be presented with the required design and operating characteristics of the various components. The initial configuration will include a high-temperature (750 °C, high-pressure (7 MPa helium loop thermally integrated with a molten fluoride salt (KF-ZrF4 flow loop operating at low pressure (0.2 MPa, at a temperature of ∼450 °C. The salt loop will be thermally integrated with the steam/water loop operating at PWR conditions. Experiment design challenges include identifying suitable materials and components that will withstand the required loop operating conditions. The instrumentation needs to be highly accurate (negligible drift in measuring operational data for extended periods of times, as data collected will be

  6. Investigations of the pathogenesis of Staphylococcus aureus and Enterococcus faecalis in an experimental footpad infection model in broiler breeders

    DEFF Research Database (Denmark)

    Thoefner, Ida; Olsen, Rikke Heidemann; Poulsen, Louise Ladefoged

    2016-01-01

    in the central foot pad. Birds underwent full post mortem and bacteriological investigation 3, 7 and 14 days after infection. Inoculation of the S. aureus resulted in systemic lesions (sepsis, endocarditis and arthritis) as well as injection site abscesses. The lesions and bacterial re-isolation in the birds...... receiving the S. aureus originating from bumble foot were restricted to the footpad only. Similar to the S. aureus the E. faecalis infected birds contracted both systemic and local lesions. Bacterial re-isolation was demonstrated in a pattern similar to the pathological findings. Both systemic and local...... responses in relation to the experimental infection occur....

  7. Experimental study on corrosion and precipitation in non-isothermal Pb-17Li system for development of liquid breeder blanket of fusion reactor

    Science.gov (United States)

    Kondo, Masatoshi; Ishii, Masaomi; Norimatsu, Takayoshi; Muroga, Takeo

    2017-07-01

    The corrosion characteristics of RAFM steel JLF-1 in a non-isothermal Pb-17Li flowing system were investigated by means of the corrosion test using a non-isothermal mixing pot. The corrosion test was performed at 739K with a temperature gradient of 14K for 500 hours. The corrosion tests at a static and a flowing conditions in an isothermal Pb-17Li system were also performed at the same temperature for the same duration with the non-isothermal test. Then, the effect of mass transfer both by the flow and the temperature gradient on the corrosion behaviors was featured by the comparison of these results. The corrosion was caused by the dissolution of Fe and Cr from the steel surface into the flowing Pb-17Li. The specimen surface revealed a fine granular microstructure after the corrosion tests. A large number of pebbleshaped protrusions were observed on the specimen surface. This microstructure was different from the original martensite microstructure of the steel, and might be formed by the influence of the reaction with Li component in the alloy. The formation of the granular microstructure was accelerated by the flow and the temperature gradient. Some pebble-shaped protrusions had gaps at their bases. The removal of these pebble-shaped granules by the flowing Pb-17Li might cause a small-scale corrosion-erosion. The results of metallurgical analysis indicated that a large-scale corrosion-erosion was also caused by their destruction of the corroded layer on the surface. The non-isothermal mixing pot equipped a cold trap by a metal mesh in the low temperature region. The metal elements of Fe and Cr were recovered as they precipitated on the surface of the metal mesh. It was found that a Fe-Cr binary intermetallic compound was formed in the precipitation procedure. The overall mass transfer coefficient for the dissolution type corrosion in the non-isothermal system was much bigger than that in the isothermal system. This model evaluation indicated that the temperature gradient accelerated the corrosion.

  8. The response of broiler breeder hens to dietary balanced protein ...

    African Journals Online (AJOL)

    Two basal feeds (118 and 175 g protein/kg) with similar balanced amino acid mixtures were appropriately blended to produce six experimental diets differing in protein. These were fed for six weeks to 180 broiler breeder hens (Ross 308) housed in individual cages from 26 w of age. A 13 h photoperiod was applied. Half the ...

  9. Experimental Evaluation of a Water Shield for a Surface Power Reactor

    Science.gov (United States)

    Pearson, J. Boise; Reid, Robert S.

    2006-01-01

    As part of the Vision for Space Exploration the end of the next decade will bring man back to the surface of the moon. One of the most critical issues for the establishment of human presence on the moon will be the availability of compact power sources. The establishment of man on the moon will require power from greater than 10's of kWt's in follow on years. Nuclear reactors are extremely we11 suited to meet the needs for power generation on the lunar or Martian surface. reactor system. Several competing concepts exist for lightweight, safe, robust shielding systems such as a water shield, lithium hydride (LiH), Boron Carbide, and others. Water offers several potential advantages, including reduced cost, reduced technical risk, and reduced mass. Water has not typically been considered for space reactor applications because of the need for gravity to remove the potential for radiation streaming paths. The water shield concept relies on predictions of passive circulation of the shield water by natural convection to adequately cool the shield. This prediction needs to be experimentally evaluated, especially for shields with complex geometries. MSFC has developed the experience and fac necessary to do this evaluation in the Early Flight Fission - Test Facility (EFF-TF).

  10. Experimental conditions for determination of the neutrino mass hierarchy with reactor antineutrinos

    Directory of Open Access Journals (Sweden)

    Myoung Youl Pac

    2016-01-01

    Full Text Available This article reports the optimized experimental requirements to determine neutrino mass hierarchy using electron antineutrinos (ν¯e generated in a nuclear reactor. The features of the neutrino mass hierarchy can be extracted from the |Δm312| and |Δm322| oscillations by applying the Fourier sine and cosine transforms to the L/E spectrum. To determine the neutrino mass hierarchy above 90% probability, the requirements on the energy resolution as a function of the baseline are studied at sin2⁡2θ13=0.1. If the energy resolution of the neutrino detector is less than 0.04/Eν and the determination probability obtained from Bayes' theorem is above 90%, the detector needs to be located around 48–53 km from the reactor(s to measure the energy spectrum of ν¯e. These results will be helpful for setting up an experiment to determine the neutrino mass hierarchy, which is an important problem in neutrino physics.

  11. Generation of an activation map for decommissioning planning of the Berlin Experimental Reactor-II

    Science.gov (United States)

    Lapins, Janis; Guilliard, Nicole; Bernnat, Wolfgang

    2017-09-01

    The BER-II is an experimental facility with 10 MW that was operated since 1974. Its planned operation will end in 2019. To support the decommissioning planning, a map with the overall distribution of relevant radionuclides has to be created according to the state of the art. In this paper, a procedure to create these 3-d maps using a combination of MCNP and deterministic methods is presented. With this approach, an activation analysis is performed for the whole reactor geometry including the most remote parts of the concrete shielding.

  12. ESTIMATION OF ROUTINE DISCHARGE OF RADIONUCLIDES ON POWER REACTOR EXPERIMENTAL RDE

    Directory of Open Access Journals (Sweden)

    P.M. Udiyani

    2017-02-01

    Full Text Available Experimental power reactor (RDE which is planned to be constructed by BATAN is a kind of High Temperature Gas Cooled Reactor (HTGR with 10 MWth power. HTGR is a helium gas-cooled reactor with TRISO-coated fuel that is able to confine fission products remained in the core. Although the fission products released into the environment are very small, in order to comply the regulations the study about environmental radiation on normal or routine operation condition need to be performed. Estimation of radiology in the environment involves the source term released into the environment under routine operation condition. The purpose of this study is to estimate the source term released into the environment based on postulation of normal or routine operations of RDE. The research approach starts with an assumption that there are defects and impurities in the TRISO fuel because of limitation during the fabrication. Mechanism of fission products release from the fuel to the environment was created based on the safety features design of RDE. Radionuclides inventories in the reactor were calculated using ORIGEN-2 whose library has been modified for HTGR type, and the assumptions of defects of the TRISO fuel and release fraction for each compartment of RDE safety system used a reference parameter. The results showed that the important source terms of RDE are group of noble gases (Kr and Xe, halogen (I, Sr, Cs, H-3, and Ag. Activities of RDE source terms for routine operations have no significant difference with the HTGR source terms with the same power. Keywords: routine discharge, radionuclide, source term, RDE, HTGR

  13. Approaches to experimental validation of high-temperature gas-cooled reactor components

    Energy Technology Data Exchange (ETDEWEB)

    Belov, S.E. [Joint Stock Company ' Afrikantov OKB Mechanical Engineering' , Burnakovsky Proezd, 15, Nizhny Novgorod 603074 (Russian Federation); Borovkov, M.N., E-mail: borovkov@okbm.nnov.ru [Joint Stock Company ' Afrikantov OKB Mechanical Engineering' , Burnakovsky Proezd, 15, Nizhny Novgorod 603074 (Russian Federation); Golovko, V.F.; Dmitrieva, I.V.; Drumov, I.V.; Znamensky, D.S.; Kodochigov, N.G. [Joint Stock Company ' Afrikantov OKB Mechanical Engineering' , Burnakovsky Proezd, 15, Nizhny Novgorod 603074 (Russian Federation); Baxi, C.B.; Shenoy, A.; Telengator, A. [General Atomics, 3550 General Atomics Court, CA (United States); Razvi, J., E-mail: Junaid.Razvi@ga.com [General Atomics, 3550 General Atomics Court, CA (United States)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Computational and experimental investigations of thermal and hydrodynamic characteristics for the equipment. Black-Right-Pointing-Pointer Vibroacoustic investigations. Black-Right-Pointing-Pointer Studies of the electromagnetic suspension system on GT-MHR turbo machine rotor models. Black-Right-Pointing-Pointer Experimental investigations of the catcher bearings design. - Abstract: The special feature of high-temperature gas-cooled reactors (HTGRs) is stressed operating conditions for equipment due to high temperature of the primary circuit helium, up to 950 Degree-Sign C, as well as acoustic and hydrodynamic loads upon the gas path elements. Therefore, great significance is given to reproduction of real operation conditions in tests. Experimental investigation of full-size nuclear power plant (NPP) primary circuit components is not practically feasible because costly test facilities will have to be developed for the power of up to hundreds of megawatts. Under such conditions, the only possible process to validate designs under development is representative tests of smaller scale models and fragmentary models. At the same time, in order to take in to validated account the effect of various physical factors, it is necessary to ensure reproduction of both individual processes and integrated tests incorporating needed integrated investigations. Presented are approaches to experimental validation of thermohydraulic and vibroacoustic characteristics for main equipment components and primary circuit path elements under standard loading conditions, which take account of their operation in the HTGR. Within the framework of the of modular helium reactor project, including a turbo machine in the primary circuit, a new and difficult problem is creation of multiple-bearing flexible vertical rotor. Presented are approaches to analytical and experimental validation of the rotor electromagnetic bearings, catcher bearings, flexible rotor

  14. Modeling and Experimental Studies of Mercury Oxidation and Adsorption in a Fixed-Bed Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Buitrago, Paula A.; Morrill, Mike; Lighty, JoAnn S.; Silcox, Geoffrey D.

    2009-06-15

    This report presents experimental and modeling mercury oxidation and adsorption data. Fixed-bed and single-particle models of mercury adsorption were developed. The experimental data were obtained with two reactors: a 300-W, methane-fired, tubular, quartz-lined reactor for studying homogeneous oxidation reactions and a fixed-bed reactor, also of quartz, for studying heterogeneous reactions. The latter was attached to the exit of the former to provide realistic combustion gases. The fixed-bed reactor contained one gram of coconut-shell carbon and remained at a temperature of 150°C. All methane, air, SO2, and halogen species were introduced through the burner to produce a radical pool representative of real combustion systems. A Tekran 2537A Analyzer coupled with a wet conditioning system provided speciated mercury concentrations. At 150°C and in the absence of HCl or HBr, the mercury uptake was about 20%. The addition of 50 ppm HCl caused complete capture of all elemental and oxidized mercury species. In the absence of halogens, SO2 increased the mercury adsorption efficiency to up to 30 percent. The extent of adsorption decreased with increasing SO2 concentration when halogens were present. Increasing the HCl concentration to 100 ppm lessened the effect of SO2. The fixed-bed model incorporates Langmuir adsorption kinetics and was developed to predict adsorption of elemental mercury and the effect of multiple flue gas components. This model neglects intraparticle diffusional resistances and is only applicable to pulverized carbon sorbents. It roughly describes experimental data from the literature. The current version includes the ability to account for competitive adsorption between mercury, SO2, and NO2. The single particle model simulates in-flight sorbent capture of elemental mercury. This model was developed to include Langmuir and Freundlich isotherms, rate equations, sorbent feed rate, and

  15. Overview of the TIBER 2 (Thermal Ignition/Burn Experimental Reactor) design

    Science.gov (United States)

    Henning, C. D.; Logan, B. G.

    1987-10-01

    The TIBER 2 Tokamak Ignition/Burn Experimental Reactor design is the result of efforts by numerous people and institutions, including many fusion laboratories, universities, and industries. While subsystems will be covered extensively in other reports, this overview will attempt to place the work in perspective. Major features of the design are compact size, low cost, and steady-state operation. These are achieved through plasma shaping and innovative features such as radiation tolerant magnets and optimized shielding. While TIBER 2 can operate in a pulsed mode, steady-state is preferred for nuclear testing. Current drive is achieved by a combination of lower hybrid and neutral beams. In addition, 10 MW of ECR is added for disruption control and current drive profiling. The TIBER 2 design has been the US option in preparation for the International Thermonuclear Experimental Reactor (ITER). Other equivalent national designs are the NET in Europe, the FER in Japan and the OTR in the USSR. These designs will help set the basis for the new international design effort.

  16. Modeling and experimental validation of hydrodynamics in an ultrasonic batch reactor.

    Science.gov (United States)

    Ajmal, M; Rusli, S; Fieg, G

    2016-01-01

    Simulation of hydrodynamics in ultrasonic batch reactor containing immobilized enzymes as catalyst is done. A transducer with variable power and constant frequency (24 kHz) is taken as source of ultrasound (US). Simulation comprises two steps. In first step, acoustic pressure field is simulated and in second step effect of this field on particle trajectories is simulated. Simulation results are compared with experimentally determined particle trajectories using PIV Lab (particle image velocimetry). Effect of varying ultrasonic power, positioning and number of ultrasonic sources on particle trajectories is studied. It is observed that catalyst particles tend to orientate according to pattern of acoustic pressure field. An increase in ultrasonic power increases particle velocity and also brings more particles into motion. Simulation results are found to be in agreement with experimentally determined data. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. Kinetics of vinyl acetate emulsion polymerization in a pulsed tubular reactor: comparison between experimental and simulation results

    Directory of Open Access Journals (Sweden)

    Sayer C.

    2002-01-01

    Full Text Available A new reactor, the pulsed sieve plate column (PSPC, was developed to perform continuous emulsion polymerization reactions. This reactor combines the enhanced flexibility of tubular reactors with the mixing behavior provided by sieved plates and by the introduction of pulses that is important to prevent emulsion destabilization. The main objective of this work is to study the kinetics of vinyl acetate (VA emulsion polymerization reactions performed in this PSPC. Therefore, both experimental studies and reaction simulations were performed. Results showed that it is possible to obtain high conversions with rather low residence times in the PSPC.

  18. Helium-cooled molten-salt fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Fulton, F.J.; Huegel, F.; Neef, W.S. Jr.; Sherwood, A.E.; Berwald, D.H.; Whitley, R.H.; Wong, C.P.C.; Devan, J.H.

    1984-12-01

    We present a new conceptual design for a fusion reactor blanket that is intended to produce fissile material for fission power plants. Fast fission is suppressed by using beryllium instead of uranium to multiply neutrons. Thermal fission is suppressed by minimizing the fissile inventory. The molten-salt breeding medium (LiF + BeF/sub 2/ + ThF/sub 4/) is circulated through the blanket and to the on-line processing system where /sup 233/U and tritium are continuously removed. Helium cools the blanket and the austenitic steel tubes that contain the molten salt. Austenitic steel was chosen because of its ease of fabrication, adequate radiation-damage lifetime, and low corrosion by molten salt. We estimate that a breeder having 3000 MW of fusion power will produce 6500 kg of /sup 233/U per year. This amount is enough to provide makeup for 20 GWe of light-water reactors per year or twice that many high-temperature gas-cooled reactors or Canadian heavy-water reactors. Safety is enhanced because the afterheat is low and blanket materials do not react with air or water. The fusion breeder based on a pre-MARS tandem mirror is estimated to cost $4.9B or 2.35 times a light-water reactor of the same power. The estimated cost of the /sup 233/U produced is $40/g for fusion plants costing 2.35 times that of a light-water reactor if utility owned or $16/g if government owned.

  19. CFD and experimental investigation of sloshing parameters for the safety assessment of HLM reactors

    Energy Technology Data Exchange (ETDEWEB)

    Myrillas, Konstantinos, E-mail: myrillas@vki.ac.be [von Karman Institute for Fluid Dynamics, Chaussée de Waterloo 72, B-1640 Rhode-St-Genèse (Belgium); Planquart, Philippe, E-mail: philippe.planquart@vki.ac.be [von Karman Institute for Fluid Dynamics, Chaussée de Waterloo 72, B-1640 Rhode-St-Genèse (Belgium); Simonini, Alessia, E-mail: Simonini@vki.ac.be [von Karman Institute for Fluid Dynamics, Chaussée de Waterloo 72, B-1640 Rhode-St-Genèse (Belgium); Buchlin, Jean-Marie, E-mail: buchlin@vki.ac.be [von Karman Institute for Fluid Dynamics, Chaussée de Waterloo 72, B-1640 Rhode-St-Genèse (Belgium); Schyns, Marc, E-mail: mschyns@SCKCEN.BE [SCK-CEN, Boeretang 200, B-2400 Mol (Belgium)

    2017-02-15

    Highlights: • Comparison of sloshing behavior in cylindrical tank using mercury and water. • Flow visualization of liquid sloshing in resonance case. • CFD simulations of sloshing with OpenFOAM, using the VOF method. • Qualitative and quantitative comparison of experimental and numerical results. • Evaluation of sloshing forces on the tank walls from numerical simulations. - Abstract: For the safety assessment of Heavy Liquid Metal nuclear reactors under seismic excitation, sloshing phenomena can be of great concern. The earthquake motions are transferred to the liquid coolant which oscillates inside the vessel, exerting additional forces on the walls and internal structures. The present study examines the case of MYRRHA, a multi-purpose experimental reactor with LBE as coolant, developed by SCK·CEN. The sloshing behavior of liquid metals is studied through a comparison between mercury and water in a cylindrical tank. Experimental investigation of sloshing is carried out using optical techniques with the shaking table facility SHAKESPEARE at the von Karman Institute. Emphasis is given on the resonance case, where maximum forces occur on the tank walls. The experimental cases are reproduced numerically with the CFD software OpenFOAM, using the VOF method to track the liquid interface. The non-linear nature of sloshing is observed through visualization, where swirling is shown in the resonance case. The complex behavior is well reproduced by the CFD simulations, providing good qualitative validation of the numerical tools. A quantitative comparison of the maximum liquid elevation inside the tank shows higher values for the liquid metal than for water. Some discrepancies are revealed in CFD results and the differences are quantified. From simulations it is verified that the forces scale with the density ratio, following similar evolution in time. Overall, water is demonstrated to be a valid option as a working liquid in order to evaluate the sloshing

  20. Experimental study and modeling of a high-temperature solar chemical reactor for hydrogen production from methane cracking

    Energy Technology Data Exchange (ETDEWEB)

    Abanades, Stephane; Flamant, Gilles [Processes, Materials, and Solar Energy Laboratory, CNRS (PROMES-CNRS, UPR 8521), 7 Rue du Four Solaire, 66120 Odeillo Font-Romeu (France)

    2007-07-15

    A high-temperature fluid-wall solar reactor was developed for the production of hydrogen from methane cracking. This laboratory-scale reactor features a graphite tubular cavity directly heated by concentrated solar energy, in which the reactive flowing gas dissociates to form hydrogen and carbon black. The solar reactor characterization was achieved with: (a) a thorough experimental study on the reactor performance versus operating conditions and (b) solar reactor modeling. The results showed that the conversion of CH{sub 4} and yield of H{sub 2} can exceed 97% and 90%, respectively, and these depend strongly on temperature and on fluid-wall heat transfer and reaction surface area. In addition to the experimental study, a 2D computational model coupling transport phenomena was developed to predict the mapping of reactor temperature and of species concentration, and the reaction extent at the outlet. The model was validated and kinetics of methane decomposition were identified from simulations and comparison to experimental results. (author)

  1. Formulation and experimental evaluation of closed-form control laws for the rapid maneuvering of reactor neutronic power

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J.A. (Massachusetts Inst. of Tech., Cambridge, MA (USA). Nuclear Reactor Lab.)

    1989-09-01

    This report describes both the theoretical development and the experimental evaluation of a novel, robust methodology for the time-optimal adjustment of a reactor's neutronic power under conditions of closed-loop digital control. Central to the approach are the MIT-SNL Period-Generated Minimum Time Control Laws' which determine the rate at which reactivity should be changed in order to cause a reactor's neutronic power to conform to a specified trajectory. Using these laws, reactor power can be safely raised by five to seven orders of magnitude in a few seconds. The MIT-SNL laws were developed to facilitate rapid increases of neutronic power on spacecraft reactors operating in an SDI environment. However, these laws are generic and have other applications including the rapid recovery of research and test reactors subsequent to an unanticipated shutdown, power increases following the achievement of criticality on commercial reactors, power adjustments on commercial reactors so as to minimize thermal stress, and automated startups. The work reported here was performed by the Massachusetts Institute of Technology under contract to the Sandia National Laboratories. Support was also provided by the US Department of Energy's Division of University and Industry Programs. The work described in this report is significant in that a novel solution to the problem of time-optimal control of neutronic power was identified, in that a rigorous description of a reactor's dynamics was derived in that the rate of change of reactivity was recognized as the proper control signal, and in that extensive experimental trials were conducted of these newly developed concepts on actual nuclear reactors. 43 refs., 118 figs., 11 tabs.

  2. Plasma instabilities of a charge breeder ECRIS

    Science.gov (United States)

    Tarvainen, O.; Angot, J.; Izotov, I.; Skalyga, V.; Koivisto, H.; Thuillier, T.; Kalvas, T.; Lamy, T.

    2017-10-01

    Experimental observation of plasma instabilities in a charge breeder electron cyclotron resonance ion source (CB-ECRIS) is reported. It is demonstrated that the injection of 133Cs+ or 85Rb+ ion beam into the oxygen discharge of the CB-ECRIS can trigger electron cyclotron instabilities, which restricts the parameter space available for the optimization of the charge breeding efficiency. It is concluded that the transition from a stable to unstable plasma regime is caused by gradual accumulation and ionization of Cs/Rb and simultaneous change of the discharge parameters in 10-100 ms time scale, not by a prompt interaction between the incident ion beam and the ECRIS plasma. The instabilities lead to loss of ion confinement, which results in the sputtering of the surfaces in contact with the plasma, followed by up to an order of magnitude increase of impurity currents in the extracted n+ ion beam.

  3. Production behavior of irradiation defects in solid breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Moriyama, Hirotake; Moritani, Kimikazu [Kyoto Univ. (Japan)

    1998-03-01

    The irradiation effects in solid breeder materials are important for the performance assessment of fusion reactor blanket systems. For a clearer understanding of such effects, we have studied the production behavior of irradiation defects in some lithium ceramics by an in-situ luminescence measurement technique under ion beam irradiation. The luminescence spectra were measured at different temperatures, and the temperature-transient behaviors of luminescence intensity were also measured. The production mechanisms of irradiation defects were discussed on the basis of the observations. (author)

  4. Development of gas cooled reactors and experimental setup of high temperature helium loop for in-pile operation

    Energy Technology Data Exchange (ETDEWEB)

    Miletić, Marija, E-mail: marija_miletic@live.com [Czech Technical University in Prague, Prague (Czech Republic); Fukač, Rostislav, E-mail: fuk@cvrez.cz [Research Centre Rez Ltd., Rez (Czech Republic); Pioro, Igor, E-mail: Igor.Pioro@uoit.ca [University of Ontario Institute of Technology, Oshawa (Canada); Dragunov, Alexey, E-mail: Alexey.Dragunov@uoit.ca [University of Ontario Institute of Technology, Oshawa (Canada)

    2014-09-15

    coolants. The purpose of the high temperature helium loop (HTHL) is to simulate technical and chemical conditions of VHTR's coolant. The loop is intended to serve an as experimental device for fatigue and creep tests of construction metallic materials for gas-cooled reactors and it should be also employed for research in field of gaseous coolant chemistry. The loop will serve also for tests of nuclear graphite, dosing and helium purification systems. Because the VHTR is a new reactor concept, major technical uncertainties remain relative to helium-cooled advanced reactor systems. This paper summarizes also the concept of the HTHL in the Research Centre Rez Ltd., its design, utilization and future plans for experimental setup.

  5. Feeding Programs for Broiler Breeders in the Start Phase

    Directory of Open Access Journals (Sweden)

    J Tremarin

    Full Text Available ABSTRACT The fast-growing Brazilian aviculture requires studies to improve zootechnical performance indexes for broiler breeders. The purpose of this study was to assess different feeding programs for broiler breeders on performance and development of digestive organs. A total of 48,000, 1d-old, Cobb 500 broiler breeders were divided into two sheds with 24,000 birds each. The experiment was randomized in block design, considering each shed a block, with 4 treatments and 6 replications per treatment with 2,000 birds in each. Treatments consisted of: Shed 1 T1 = starter feed; T2 = T1 + probiotics; Shed 2 T3 = pre-starter feed; T4 = T3 + probiotics. The productive performance characteristics (bird weight, weight gain, feed intake and feed conversion, the development of digestive organs (gizzard, proventriculus, spleen, bursa of Fabricius and small bowel as well as the small bowel length were assessed weekly for all experimental groups, in samples of 10 birds per treatment. The best feed conversion and weight gain were observed with pre-starter feed in the first 7 days of age, with or without probiotic. Small bowel, gizzard and proventriculus development at 28 days was better for birds on pre-starter feed compared to those on starter feed alone. It is possible to conclude that broiler breeders on pre-starter feed during the first 7 days of age are likely to show better physical and productive performances in the adult phase.

  6. Conceptual design of superconducting magnet systems for the Argonne Tokamak Experimental Power Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Wang, S.T.; Turner, L.R.; Mills, F.E.; DeMichele, D.W.; Smelser, P.; Kim, S.H.

    1976-01-01

    As an integral effort in the Argonne Tokamak Experimental Power Reactor Conceptual Design, the conceptual design of a 10-tesla, pure-tension superconducting toroidal-field (TF) coil system has been developed in sufficient detail to define a realistic design for the TF coil system that could be built based upon the current state of technology with minimum technological extrapolations. A conceptual design study on the superconducting ohmic-heating (OH) coils and the superconducting equilibrium-field (EF) coils were also completed. These conceptual designs are developed in sufficient detail with clear information on high current ac conductor design, cooling, venting provision, coil structural support and zero loss poloidal coil cryostat design. Also investigated is the EF penetration into the blanket and shield.

  7. A large scale fullerenes synthesis solar reactor modelling and first experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Guillard, T.; Flamand, G.; Robert, J.F.; Rivoire, B.; Olalde, G.; Alvarez, L. [Centre National de la Recherche Scientifique (CNRS-IMP), 66 - Font-Romeu (France); Laplaze, D. [Universite de Montpellier, GDPC, 34 (France)

    1999-03-01

    After the promising results obtained with a 2 kW solar furnace for fullerenes and nano-tubes synthesis, a large scale production project using the 1 MW Odeillo solar furnace started in 1997. This paper presents the first experimental results obtained with a concept-validation vessel and the comparison with a numerical simulation of the target thermal behavior. It is shown that a 6 mm i.d. graphite rod heated by a 500 W/cm{sup 2} incident solar flux density (I{sub s}) reaches a front temperature of 2800 K, in agreement with the thermal model. On this basis, accurate prediction of maximum working temperature of the 1 MW reactor is proposed: 3400 K for I{sub s} = 900 W/cm{sup 2}. (authors)

  8. Review of the International Thermonuclear Experimental Reactor (ITER) detailed design report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-18

    Dr. Martha Krebs, Director, Office of Energy Research at the US Department of Energy (DOE), wrote to the Fusion Energy Sciences Advisory Committee (FESAC), in letters dated September 23 and November 6, 1996, requesting that FESAC review the International Thermonuclear Experimental Reactor (ITER) Detailed Design Report (DDR) and provide its view of the adequacy of the DDR as part of the basis for the United States decision to enter negotiations with the other interested Parties regarding the terms and conditions for an agreement for the construction, operations, exploitation and decommissioning of ITER. The letter from Dr. Krebs, referred to as the Charge Letter, provided context for the review and a set of questions of specific interest.

  9. Development plan for the External Hazards Experimental Group. Light Water Reactor Sustainability Program

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Justin Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Burns, Douglas Edward [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kammerer, Annie [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    This report describes the development plan for a new multi-partner External Hazards Experimental Group (EHEG) coordinated by Idaho National Laboratory (INL) within the Risk-Informed Safety Margin Characterization (RISMC) technical pathway of the Light Water Reactor Sustainability Program. Currently, there is limited data available for development and validation of the tools and methods being developed in the RISMC Toolkit. The EHEG is being developed to obtain high-quality, small- and large-scale experimental data validation of RISMC tools and methods in a timely and cost-effective way. The group of universities and national laboratories that will eventually form the EHEG (which is ultimately expected to include both the initial participants and other universities and national laboratories that have been identified) have the expertise and experimental capabilities needed to both obtain and compile existing data archives and perform additional seismic and flooding experiments. The data developed by EHEG will be stored in databases for use within RISMC. These databases will be used to validate the advanced external hazard tools and methods.

  10. Reactor operation

    CERN Document Server

    Shaw, J

    2013-01-01

    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

  11. Proceedings of the NEACRP/IAEA Specialists meeting on the international comparison calculation of a large sodium-cooled fast breeder reactor at Argonne National Laboratory on February 7-9, 1978

    Energy Technology Data Exchange (ETDEWEB)

    LeSage, L.G.; McKnight, R.D.; Wade, D.C.; Freese, K.E.; Collins, P.J.

    1980-08-01

    The results of an international comparison calculation of a large (1250 MWe) LMFBR benchmark model are presented and discussed. Eight reactor configurations were calculated. Parameters included with the comparison were: eigenvalue, k/sub infinity/, neutron balance data, breeding reaction rate ratios, reactivity worths, central control rod worth, regional sodium void reactivity, core Doppler and effective delayed neutron fraction. Ten countries participated in the comparison, and sixteen solutions were contributed. The discussion focuses on the variation in parameter values, the degree of consistency among the various parameters and solutions, and the identification of unexpected results. The results are displayed and discussed both by individual participants and by groupings of participants (e.g., results from adjusted data sets versus non-adjusted data sets).

  12. Computational and Experimental Investigations of the Coolant Flow in the Cassette Fissile Core of a KLT-40S Reactor

    Science.gov (United States)

    Dmitriev, S. M.; Varentsov, A. V.; Dobrov, A. A.; Doronkov, D. V.; Pronin, A. N.; Sorokin, V. D.; Khrobostov, A. E.

    2017-07-01

    Results of experimental investigations of the local hydrodynamic and mass-exchange characteristics of a coolant flowing through the cells in the characteristic zones of a fuel assembly of a KLT-40S reactor plant downstream of a plate-type spacer grid by the method of diffusion of a gas tracer in the coolant flow with measurement of its velocity by a five-channel pneumometric probe are presented. An analysis of the concentration distribution of the tracer in the coolant flow downstream of a plate-type spacer grid in the fuel assembly of the KLT-40S reactor plant and its velocity field made it possible to obtain a detailed pattern of this flow and to determine its main mechanisms and features. Results of measurement of the hydraulic-resistance coefficient of a plate-type spacer grid depending on the Reynolds number are presented. On the basis of the experimental data obtained, recommendations for improvement of the method of calculating the flow rate of a coolant in the cells of the fissile core of a KLT-40S reactor were developed. The results of investigations of the local hydrodynamic and mass-exchange characteristics of the coolant flow in the fuel assembly of the KLT-40S reactor plant were accepted for estimating the thermal and technical reliability of the fissile cores of KLT-40S reactors and were included in the database for verification of computational hydrodynamics programs (CFD codes).

  13. Analysis of the optimal fuel composition for the Indonesian experimental power reactor

    Energy Technology Data Exchange (ETDEWEB)

    Liem, Peng Hong [Nippon Advanced Information Service (NAIS Co., Inc.), Ibaraki (Japan); Sembiring, Tagor Malem [National Nuclear Energy Agency of Indonesia, Banten (Indonesia). Center for Nuclear Reactor Technology and Safety; Arbie, Bakri; Subki, Iyos [PT MOTAB Technology, Jakarta Barat (Indonesia)

    2017-03-15

    The optimal fuel composition of the 10 MWth Experimental Power Reactor (RDE), to be built by the Indonesian National Nuclear Energy Agency (BATAN), is a very important design parameter since it will directly affect the fuel cost, new and spent fuel storage capacity, and other back-end environmental burden. The RDE is a very small sized pebble-bed high temperature gas-cooled reactor (HTGR) with low enriched uranium (LEU) UO{sub 2} TRISO fuel under multipass or once-through-then-out fueling scheme. A scoping study on fuel composition parameters, namely heavy metal (HM) loading per pebble and uranium enrichment is conducted. All burnup, criticality calculations and core equilibrium search are carried out by using BATAN-MPASS, a general in-core fuel management code for pebble bed HTGRs, featured with many automatic equilibrium searching options as well as thermal-hydraulic calculation capability. The RDE User Requirement Document issued by BATAN is used to derive the main core design parameters and constraints. The scoping study is conducted over uranium enrichment in the range of 10 to 20 w/o and HM loading in the range of 4 g to 10 g/pebble. Fissile loading per unit energy generated (kg/GWd) is taken as the objective function for the present scoping study. The analysis results show that the optimal HM loading is around 8 g/pebble. Under the constraint of 80 GWd/t fuel discharge burnup imposed by the technical specification, the uranium enrichment for the optimal HM loading is approximately 13 w/o.

  14. Thermo-kinetic instabilities in model reactors. Examples in experimental tests

    Science.gov (United States)

    Lavadera, Marco Lubrano; Sorrentino, Giancarlo; Sabia, Pino; de Joannon, Mara; Cavaliere, Antonio; Ragucci, Raffaele

    2017-11-01

    The use of advanced combustion technologies (such as MILD, LTC, etc.) is among the most promising methods to reduce emission of pollutants. For such technologies, working temperatures are enough low to boost the formation of several classes of pollutants, such as NOx and soot. To access this temperature range, a significant dilution as well as preheating of reactants is required. Such conditions are usually achieved by a strong recirculation of exhaust gases that simultaneously dilute and pre-heat the fresh reactants. These peculiar operative conditions also imply strong fuel flexibility, thus allowing the use of low calorific value (LCV) energy carriers with high efficiency. However, the intersection of low combustion temperatures and highly diluted mixtures with intense pre-heating alters the evolution of the combustion process with respect to traditional flames, leading to features such as the susceptibility to oscillations, which are undesirable during combustion. Therefore, an effective use of advanced combustion technologies requires a thorough analysis of the combustion kinetic characteristics in order to identify optimal operating conditions and control strategies with high efficiency and low pollutant emissions. The present work experimentally and numerically characterized the ignition and oxidation processes of methane and propane, highly diluted in nitrogen, at atmospheric pressure, in a Plug Flow Reactor and a Perfectly Stirred Reactor under a wide range of operating conditions involving temperatures, mixture compositions and dilution levels. The attention was focused particularly on the chemistry of oscillatory phenomena and multistage ignitions. The global behavior of these systems can be qualitatively and partially quantitatively modeled using the detailed kinetic models available in the literature. Results suggested that, for diluted conditions and lower adiabatic flame temperatures, the competition among several pathways, i.e. intermediate- and

  15. Basic experiments during loss of vacuum event (LOVE) in fusion experimental reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Masuro; Kunugi, Tomoaki; Seki, Yasushi (JAERI, Ibaraki (Japan))

    1993-06-01

    If a loss of vacuum event (LOVE) occurs due to damage of the vacuum vessel of a nuclear fusion experimental reactor, some chemical reactions such as a graphic oxidation and a buoyancy-driven exchange flow take place after equalization of the gas pressure between the inside and outside of the vacuum vessel. The graphite oxidation would generate inflammable carbon monoxide and release tritium retained in the graphite. The exchange flow through the breaches may transport the carbon monoxide and tritium out of the vacuum vessel. To add confidence to the safety evaluations and analyses, it is important to grasp the basic phenomena such as the exchange flow and the graphite oxidation. Experiments of the exchange flow and the graphite oxidation were carried out to obtain the exchange flow rate and the rate constant for the carbon monoxide combustion, respectively. These experimental results were compared with existing correlations. The authors plan a scaled-model test and a full-scale model test for the LOVE.

  16. Experimental and numerical thermal-hydraulics investigation of a molten salt reactor concept core

    Energy Technology Data Exchange (ETDEWEB)

    Yamaji, Bogdan; Aszodi, Attila [Budapest Univ. of Technology and Economics (Hungary). Inst. of Nuclear Techniques

    2017-09-15

    In the paper measurement results of experimental modelling of a molten salt fast reactor concept will be presented and compared with three-dimensional computational fluid dynamics (CFD) simulation results. Purpose of this article is twofold, on one hand to introduce a geometry modification in order to avoid the disadvantages of the original geometry and discuss new measurement results. On the other hand to present an analysis in order to suggest a method of proper numerical modelling of the problem based on the comparison of calculation results and measurement data for the new, modified geometry. The investigated concept has a homogeneous cylindrical core without any internal structures. Previous measurements on the scaled and segmented plexiglas model of the concept core and simulation results have shown that this core geometry could be optimized for better thermal-hydraulics characteristics. In case of the original geometry strong undesired flow separation could develop, that could negatively affect the characteristics of the core from neutronics point of view as well. An internal flow distributor plate was designed and installed with the purpose of optimizing the flow field in the core by enhancing its uniformity. Particle image velocimetry (PIV) measurement results of the modified experimental model will be presented and compared to numerical simulation results with the purpose of CFD model validation.

  17. Experimental and numerical studies of microwave-plasma interaction in a MWPECVD reactor

    Directory of Open Access Journals (Sweden)

    A. Massaro

    2016-12-01

    Full Text Available This work deals with and proposes a simple and compact diagnostic method able to characterize the interaction between microwave and plasma without the necessity of using an external diagnostic tool. The interaction between 2.45 GHz microwave and plasma, in a typical ASTeX-type reactor, is investigated from experimental and numerical view points. The experiments are performed by considering plasmas of three different gas mixtures: H2, CH4-H2 and CH4-H2-N2. The two latter are used to deposit synthetic undoped and n-doped diamond films. The experimental setup equipped with a matching network enables the measurements of very low reflected power. The reflected powers show ripples due to the mismatching between wave and plasma impedance. Specifically, the three types of plasma exhibit reflected power values related to the variation of electron-neutral collision frequency among the species by changing the gas mixture. The different gas mixtures studied are also useful to test the sensitivity of the reflected power measurements to the change of plasma composition. By means of a numerical model, only the interaction of microwave and H2 plasma is examined allowing the estimation of plasma and matching network impedances and of reflected power that is found about eighteen times higher than that measured.

  18. Study of process of water disinfection it saw energy solar using an experimental reactor; Estudo do proceso de desinfeccao de agua via energia solar utilizando um reator experimental

    Energy Technology Data Exchange (ETDEWEB)

    Batista, C. H.; Prado, L. R.; Lima, A. S.; Egues, S. M. S.; Araujo, P. M. M.

    2008-07-01

    In this work, was conducted an experimental study of the efficiency of a solar reactor in the disinfection of drinking water using photolysis (UV) and heterogeneous photo catalysis (TiO{sub 2}/UV). The experiments were conducted in batch mode, evaluating the effects of reactor inclination and the presence of a solar concentrator. The results indicated that the employed system was capable to promote the complete disinfection in 150 min using only the photo thermic effect, and in 120 min with the addition of immobilized TiO{sub 2} and the solar concentrator. (Author)

  19. Estudio del comportamiento de reactores discontinuos y semicontinuos: modelización y comprobación experimental

    OpenAIRE

    Grau Vilalta, Ma. Dolors

    1999-01-01

    L'objectiu primordial d'aquest treball és la comparació entre el funcionament d'un reactor discontinu i un de semicontinu. Per això es porta a terme la modelització matemàtica d'ambdós, utilitzant programes propis emprant el llenguatge Fortran 77, a més del simulador ISIM i el software MATLAB. La validació dels models matemàtics s'efectua, en primer lloc, a partir de dades de la bibliografia. A partir d'aquí, es realitzen proves experimentals en una planta piloto amb un reactor encamisat de v...

  20. Experimental and Analytic Study on the Core Bypass Flow in a Very High Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Richard Schultz

    2012-04-01

    Core bypass flow has been one of key issues in the very high temperature reactor (VHTR) design for securing core thermal margins and achieving target temperatures at the core exit. The bypass flow in a prismatic VHTR core occurs through the control element holes and the radial and axial gaps between the graphite blocks for manufacturing and refueling tolerances. These gaps vary with the core life cycles because of the irradiation swelling/shrinkage characteristic of the graphite blocks such as fuel and reflector blocks, which are main components of a core's structure. Thus, the core bypass flow occurs in a complicated multidimensional way. The accurate prediction of this bypass flow and counter-measures to minimize it are thus of major importance in assuring core thermal margins and securing higher core efficiency. Even with this importance, there has not been much effort in quantifying and accurately modeling the effect of the core bypass flow. The main objectives of this project were to generate experimental data for validating the software to be used to calculate the bypass flow in a prismatic VHTR core, validate thermofluid analysis tools and their model improvements, and identify and assess measures for reducing the bypass flow. To achieve these objectives, tasks were defined to (1) design and construct experiments to generate validation data for software analysis tools, (2) determine the experimental conditions and define the measurement requirements and techniques, (3) generate and analyze the experimental data, (4) validate and improve the thermofluid analysis tools, and (5) identify measures to control the bypass flow and assess its performance in the experiment.

  1. Review of nuclear data improvement needs for nuclear radiation measurement techniques used at the CEA experimental reactor facilities

    Directory of Open Access Journals (Sweden)

    Destouches Christophe

    2016-01-01

    Full Text Available The constant improvement of the neutron and gamma calculation codes used in experimental nuclear reactors goes hand in hand with that of the associated nuclear data libraries. The validation of these calculation schemes always requires the confrontation with integral experiments performed in experimental reactors to be completed. Nuclear data of interest, straight as cross sections, or elaborated ones such as reactivity, are always derived from a reaction rate measurement which is the only measurable parameter in a nuclear sensor. So, in order to derive physical parameters from the electric signal of the sensor, one needs specific nuclear data libraries. This paper presents successively the main features of the measurement techniques used in the CEA experimental reactor facilities for the on-line and offline neutron/gamma flux characterizations: reactor dosimetry, neutron flux measurements with miniature fission chambers and Self Power Neutron Detector (SPND and gamma flux measurements with chamber ionization and TLD. For each technique, the nuclear data necessary for their interpretation will be presented, the main identified needs for improvement identified and an analysis of their impact on the quality of the measurement. Finally, a synthesis of the study will be done.

  2. Space reactors. Progress report, July-September 1981

    Energy Technology Data Exchange (ETDEWEB)

    Ranken, W.A. (comp.)

    1982-06-01

    Progress in technology development for the Space Power Advanced Reactor (SPAR) project is reported for the period July 1-September 30, 1981. The weights of neutron and gamma shields required to protect the SPAR system payloads for a range of permissible exposures have been determined, and initial results are reported. SPAR reactor safety in the case of water immersion has been modeled. Approval-in-Principle has been received for the SPAR fuel test in the Experimental Breeder Reactor-II (EBR-II); the heat pipe developed for this test is performing well. SPAR system design variations are being examined under the possibility of using long core heat pipes. Testing of the initial molybdenum/sodium artery heat pipe continued, with ambiguous results. Fabrication of the first all-bonded thermoelectric units has been completed and testing has been initiated.

  3. EXPERIMENTAL STUDY OF LOCAL HYDRODYNAMICS AND MASS EXCHANGE PROCESSES OF COOLANT IN FUEL ASSEMBLIES OF PRESSURIZED WATER REACTORS

    Directory of Open Access Journals (Sweden)

    S. M. Dmitriev

    2016-01-01

    Full Text Available The results of experimental studies of local hydrodynamics and mass exchange of coolant flow behind spacer and mixing grids of different structural versions that were developed for fuel assemblies of domestic and foreign nuclear reactors are presented in the article. In order to carry out the study the models of the following fuel assemblies have been fabricated: FA for VVER and VBER, FA-KVADRAT for PWR-reactor and FA for KLT-40C reactor. All the models have been fabricated with a full geometrical similarity with full-scale fuel assemblies. The study was carried out by simulating the flow of coolant in a core by air on an aerodynamic test rig. In order to measure local hydrodynamic characteristics of coolant flow five-channel Pitot probes were used that enable to measure the velocity vector in a point by its three components. The tracerpropane method was used for studying mass transfer processes. Flow hydrodynamics was studied by measuring cross-section velocities of coolant flow and coolant rates according to the model cells. The investigation of mass exchange processes consisted of a study of concentration distribution for tracer in experimental model, in determination of attenuation lengths of mass transfer processes behind mixing grids, in calculating of inter-cellar mass exchange coefficient. The database on coolant flow in fuel assemblies for different types of reactors had been accumulated that formed the basis of the engineering substantiation of reactor cores designs. The recommendations on choice of optimal versions of mixing grids have been taken into consideration by implementers of the JSC “OKBM Afrikantov” when creating commissioned fuel assemblies. The results of the study are used for verification of CFD-codes and CFD programs of detailed cell-by-cell calculation of reactor cores in order to decrease conservatism for substantiation of thermal-mechanical reliability.

  4. Experimental and statistical investigation of thermally induced failure in reactor fuel particles

    Energy Technology Data Exchange (ETDEWEB)

    Lunsford, J.L.; Imprescia, R.J.; Bowman, A.L.; Radosevich, C.E.

    1980-10-01

    An incomplete experimental study into the failure statistics of fuel particle for the high-temperature gas-cooled reactor (HTGR) is described. Fuel particles failure was induced by thermal ramping from room temperature to temperatures in the vicinity of 2273/sup 0/K to 2773/sup 0/K in 2 to 30 h and detected by the appearance of /sup 85/Kr in the helium carrier gas used to sweep the furnace. The concentration of krypton, a beta emitter, was detected by measuring the current that resulted when the helium sweep gas was passed through an ionization chamber. TRISO fuel particles gave a krypton concentration profile as a function of time that built up in several minutes and decayed in a fraction of an hour. This profile, which was temperature independent, was similar to the impulse response of the ionization chamber, suggesting that the TRISO particles failed instantaneously and completely. BISO fuel particles gave a krypton concentration profile as a function of time that built up in a fraction of an hour and decayed in a fraction of a day. This profile was strongly temperature dependent, suggesting that krypton release was diffusion controlled, i.e., that the krypton was diffusing through a sound coat, or that the BISO coating failed but that the krypton was unable to escape the kernel without diffusion, or that a combination of pre- and postfailure diffusion accompanied partial or complete failure.

  5. Calculation of fast neutron flux in reactor pressure tubes and experimental facilities

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, P.C. [Canadian General Electric (Canada)

    1968-07-15

    The computer program EPITHET was used to calculate the fast neutron flux (>1 MeV) in several reactor pressure tubes and experimental facilities in order to compare the fast neutron flux in the different cases and to provide a self-consistent set of flux values which may be used to relate creep strain to fast neutron flux . The facilities considered are shown below together with the calculated fast neutron flux (>1 MeV). Fast flux 10{sup 13} n/cm{sup 2}s: NPD 1.14, Douglas Point 2.66, Pickering 2.89, Gentilly 2.35, SGHWR 3.65, NRU U-1 and U-2 3.25'' pressure tube - 19 element fuel 3.05, NRU U-1 and U-2 4.07'' pressure tube - 28 element fuel 3.18, NRU U-1 and U-2 4.07'' pressure tube - 18 element fuel 2.90, NRX X-5 0.88, PRTR Mk I fuel 2.81, PRTR HPD fuel 3.52, WR-1 2.73, Mk IV creep machine (NRX) 0.85, Mk VI creep machine (NRU) 2.04, Biaxial creep insert (NRU U-49) 2.61.

  6. Analysis of Experimental Data for High Burnup PWR Spent Fuel Isotopic Validation - Vandellos II Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ilas, Germina [ORNL; Gauld, Ian C [ORNL

    2011-01-01

    This report is one of the several recent NUREG/CR reports documenting benchmark-quality radiochemical assay data and the use of the data to validate computer code predictions of isotopic composition for spent nuclear fuel, to establish the uncertainty and bias associated with code predictions. The experimental data analyzed in the current report were acquired from a high-burnup fuel program coordinated by Spanish organizations. The measurements included extensive actinide and fission product data of importance to spent fuel safety applications, including burnup credit, decay heat, and radiation source terms. Six unique spent fuel samples from three uranium oxide fuel rods were analyzed. The fuel rods had a 4.5 wt % {sup 235}U initial enrichment and were irradiated in the Vandellos II pressurized water reactor operated in Spain. The burnups of the fuel samples range from 42 to 78 GWd/MTU. The measurements were used to validate the two-dimensional depletion sequence TRITON in the SCALE computer code system.

  7. Fission product iodine release and retention in nuclear reactor accidents— experimental programme at PSI

    Science.gov (United States)

    Bruchertseifer, H.; Cripps, R.; Guentay, S.; Jaeckel, B.

    2003-01-01

    Iodine radionuclides constitute one of the most important fission products of uranium and plutonium. If the volatile forms would be released into the environment during a severe accident, a potential health hazard would then ensue. Understanding its behaviour is an important prerequisite for planning appropriate mitigation measures. Improved and extensive knowledge of the main iodine species and their reactions important for the release and retention processes in the reactor containment is thus mandatory. The aim of PSI's radiolytical studies is to improve the current thermodynamic and kinetic databases and the models for iodine used in severe accident computer codes. Formation of sparingly soluble silver iodide (AgI) in a PWR containment sump can substantially reduce volatile iodine fraction in the containment atmosphere. However, the effectiveness is dependent on its radiation stability. The direct radiolytic decomposition of AgI and the effect of impurities on iodine volatilisation were experimentally determined at PSI using a remote-controlled and automated high activity 188W/Re generator (40 GBq/ml). Low molecular weight organic iodides are difficult to be retained in engineered safety systems. Investigation of radiolytic decomposition of methyl iodide in aqueous solutions, combined with an on-line analysis of iodine species is currently under investigation at PSI.

  8. Design study of toroidal magnets for tokamak experimental power reactors. [NbTi alloys

    Energy Technology Data Exchange (ETDEWEB)

    Stekly, Z.J.J.; Lucas, E.J. (eds.)

    1976-12-01

    This report contains the results of a six-month study of superconducting toroidal field coils for a Tokamak Experimental Power Reactor to be built in the late 1980s. The designs are for 8 T and 12 T maximum magnetic field at the superconducting winding. At each field level two main concepts were generated; one in which each of the 16 coils comprising the system has an individual vacuum vessel and the other in which all the coils are contained in a single vacuum vessel. The coils have a D shape and have openings of 11.25 m x 7.5 m for the 8 T coils and 10.2 m x 6.8 m for the 12 T coils. All the designs utilize rectangular cabled conductor made from copper stabilized Niobium Titanium composite which operates at 4.2 K for the 8 T design and at 2.5 K for the 12 T design. Manufacturing procedures, processes and schedule estimates are also discussed.

  9. Bulk-bronzied graphites for plasma-facing components in ITER (International Thermonuclear Experimental Reactor)

    Energy Technology Data Exchange (ETDEWEB)

    Hirooka, Y.; Conn, R.W.; Doerner, R.; Khandagle, M. (California Univ., Los Angeles, CA (USA). Inst. of Plasma and Fusion Research); Causey, R.; Wilson, K. (Sandia National Labs., Livermore, CA (USA)); Croessmann, D.; Whitley, J. (Sandia National Labs., Albuquerque, NM (USA)); Holland, D.; Smolik, G. (Idaho National Engineering Lab., Idaho Falls, ID (USA)); Matsuda, T.; Sogabe, T. (Toyo Tanso Co. Ltd., O

    1990-06-01

    Newly developed bulk-boronized graphites and boronized C-C composites with a total boron concentration ranging from 1 wt % to 30 wt % have been evaluated as plasma-facing component materials for the International Thermonuclear Experimental Reactor (ITER). Bulk-boronized graphites have been bombarded with high-flux deuterium plasmas at temperatures between 200 and 1600{degree}C. Plasma interaction induced erosion of bulk-boronized graphites is observed to be a factor of 2--3 smaller than that of pyrolytic graphite, in regimes of physical sputtering, chemical sputtering and radiation enhanced sublimation. Postbombardment thermal desorption spectroscopy indicates that bulk-boronized graphites enhance recombinative desorption of deuterium, which leads to a suppression of the formation of deuterocarbon due to chemical sputtering. The tritium inventory in graphite has been found to decrease by an order of magnitude due to 10 wt % bulk-boronization at temperatures above 1000{degree}C. The critical heat flux to induce cracking for bulk-boronized graphites has been found to be essentially the same as that for non-boronized graphites. Also, 10 wt % bulk-boronization of graphite hinders air oxidation nearly completely at 800{degree}C and reduces the steam oxidation rate by a factor of 2--3 at around 1100 and 1350{degree}C. 38 refs., 5 figs.

  10. Economic impacts on the United States of siting decisions for the international thermonuclear experimental reactor

    Energy Technology Data Exchange (ETDEWEB)

    Peerenboom, J.P.; Hanson, M.E.; Huddleston, J.R. [and others

    1996-08-01

    This report presents the results of a study that examines and compares the probable short-term economic impacts of the International Thermonuclear Experimental Reactor (ITER) on the United States (U.S.) if (1) ITER were to be sited in the U.S., or (2) ITER were to be sited in one of the other countries that, along with the U.S., is currently participating in the ITER program. Life-cycle costs associated with ITER construction, operation, and decommissioning are analyzed to assess their economic impact. A number of possible U.S. host and U.S. non-host technology and cost-sharing arrangements with the other ITER Parties are examined, although cost-sharing arrangements and the process by which the Parties will select a host country and an ITER site remain open issues. Both national and local/regional economic impacts, as measured by gross domestic product, regional output, employment, net exports, and income, are considered. These impacts represent a portion of the complex, interrelated set of economic considerations that characterize U.S. host and U.S. non-host participation in ITER. A number of other potentially important economic and noneconomic considerations are discussed qualitatively.

  11. An experimental study on coolability through the external reactor vessel cooling according to RPV insulation design

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Kyoung Ho; Koo, Kil Mo; Park, Rae Joon; Cho, Young Ro; Kim, Sang Baik

    2004-01-01

    LAVA-ERVC experiments have been performed to investigate the effect of insulation design features on the water accessibility and coolability in case of the external reactor vessel cooling. Alumina iron thermite melt was used as corium stimulant. And the hemispherical test vessel is linearly scaled-down of RPV lower plenum. 4 tests have been performed varying the melt composition and the configuration of the insulation system. Due to the limited steam venting capacity through the insulation, steam binding occurred inside the annulus in the LAVA- ERVC-1, 2 tests which were performed for simulating the KSNP insulation design. This steam binding brought about incident heat up of the vessel outer surface at the upper part in the LAVA-ERVC-1, 2 tests. On the contrary, in the LAVA-ERVC-3, 4 tests which were performed for simulating the APR1400 insulation design, the temperatures of the vessel outer surface maintained near saturation temperature. Sufficient water ingression and steam venting through the insulation lead to effective cooldown of the vessel characterized by nucleate boiling in the LAVA-ERVC-3, 4 tests. From the LAVA-ERVC experimental results, it could be preliminarily concluded that if pertinent modification of the insulation design focused on the improvement of water ingression and steam venting should be preceded the possibility of in-vessel corium retention through the external vessel cooling could be considerably increased.

  12. A statistical experimental design to remove sulfate by crystallization in a fluidized-bed reactor

    Directory of Open Access Journals (Sweden)

    Mark Daniel G. de Luna

    2017-05-01

    Full Text Available This study used crystallization in a fluidized-bed reactor as an alternative technology to the conventional chemical precipitation to remove sulfate. The Box-Behnken Design was used to study the effects and interactions of seed dosage of synthetic gypsum, initial sulfate concentration and molar ratio of calcium to sulfate on conversion and removal of sulfate. The optimum conditions of conversion and removal of sulfate were determined and used to treat the simulated acid mine drainage (AMD wastewater. The effect of inorganic ions CO32−, NH4+ and Al3+ on sulfate conversion was also investigated. Experimental results indicated that seed dosage, initial sulfate concentration and molar ratio of calcium to sulfate are all significant parameters in the sulfate removal by fluidized-bed crystallization. The optimal conditions of 4 g seed L−1, 119.7 mM of initial sulfate concentration and [Ca2+]/[SO42−] molar ratio of 1.48 resulted in sulfate conversion of 82% and sulfate removal of 67%. Conversion and removal of sulfate in the simulated AMD wastewater were 79 and 63%, respectively. When ammonium or aluminum was added to the synthetic sulfate wastewater, significant conversion of sulfate was achieved.

  13. Economic Impacts on the United States of Siting Decisions for the International Thermonuclear Experimental Reactor

    Science.gov (United States)

    Peerenboom, J. P.; Hanson, M. E.; Huddleston, J. R.; Wolsko, T. D.

    1997-12-01

    This paper presents the results of a study that examines and compares the probable short-term economic impacts of the International Thermonuclear Experimental Reactor (ITER) on the United States (U.S.) if (1) ITER were to be sited in the U.S., or (2) ITER were to be sited in one of the other countries that, along with the U.S., is currently participating in the ITER program. Life-cycle costs associated with ITER construction, operation, and decommissioning are analyzed to assess their economic impact. A number of possible U.S. host and U.S. non-host technology and cost-sharing arrangements with the other ITER Parties are examined, although cost-sharing arrangements and the process by which the Parties will select a host country and an ITER site remain open issues. Both national and local/regional economic impacts, as measured by gross domestic product, regional output, employment, net exports, and income, are considered. These impacts represent a portion of the complex, interrelated set of economic considerations that characterize U.S. host and U.S. non-host participation in ITER. A number of other potentially important economic and noneconomic considerations are discussed qualitatively.

  14. Conceptual studies of toroidal field magnets for the tokamak (fusion) experimental power reactor. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1976-11-01

    This report presents the results of ''Conceptual Studies of Toroidal Field Magnets for the Tokamak Experimental Power Reactor'' performed for the Energy Research and Development Administration, Oak Ridge Operations. Two conceptual coil designs are developed. One design approach to produce a specified 8 Tesla maximum field uses a novel NbTi superconductor design cooled by pool-boiling liquid helium. For a highest practicable field design, a unique NbSn/sub 3/ conductor is used with forced-flow, single-phase liquid helium cooling to achieve a 12 Tesla peak field. Fabrication requirements are also developed for these approximately 7 meter horizontal bore by 11 meter vertical bore coils. Cryostat design approaches are analyzed and a hybrid cryostat approach selected. Structural analyses are performed for approaches to support in-plane and out-of-plane loads and a structural approach selected. In addition to the conceptual design studies, cost estimates and schedules are prepared for each of the design approaches, major uncertainties and recommendations for research and development identified, and test coil size for demonstration recommended.

  15. Transmission thermography for inspecting the busbar insulation layer in thermonuclear experimental reactor

    Science.gov (United States)

    Chen, Dapeng; Zhang, Guang; Zhang, Xiaolong; Zeng, Zhi

    2014-11-01

    In Thermonuclear Experimental Reactor, Superconducting Busbar is used for current transmission between magnet coils and current leads. The work temperature of the Busbar is about 4K because of liquid helium via inside. The large temperature grad from 300K to 4K could lead to the defects and damages occur on the insulation layer, which is made of glass fiber and polyimide and has a big different thermal expansion coefficient compared with the metal inner cylinder. This paper aims at developing an infrared transmission non-destructive evaluation (NDE) method for inspecting the insulation layer of Superconducting Busbar; theoretical model of transient heat conduction under a continuous inner heat source for cylindrical structure is described in the paper; a Busbar specimen which is designed with three delamination defects of different depths is heated inside by pouring hot water and monitored by an infrared detector located outside. Results demonstrate excellent detection performance for delamination defects in the insulation layer by using transmission thermography, all of the three defects of different depths can be visualized clearly in the thermal images, and the deeper defect has a better signal contrast, which is also shown in the temperature difference between defects and sound area vs. time curves. The results of light pulse thermography is also shown as a comparison, and it is found that the thermal images obtained by the transmission thermography has a much better signal contrast than that of the pulse thermography. In order to verify the experiments, finite element method is applied to simulate the heat conduction in the Busbar under the continuous inside heating, and it is found that the simulated temperature vs. time and simulated temperature difference vs. time curves are basically coincident with the experimental results. In addition, the possibility of in-service inspection for Busbar insulation layer in ITER item is discussed.

  16. Comparison of early socialization practices used for litters of small-scale registered dog breeders and nonregistered dog breeders.

    Science.gov (United States)

    Korbelik, Juraj; Rand, Jacquie S; Morton, John M

    2011-10-15

    OBJECTIVE-To compare early socialization practices between litters of breeders registered with the Canine Control Council (CCC) and litters of nonregistered breeders advertising puppies for sale in a local newspaper. DESIGN-Retrospective cohort study. Animals-80 litters of purebred and mixed-breed dogs from registered (n = 40) and non-registered (40) breeders. PROCEDURES-Registered breeders were randomly selected from the CCC website, and nonregistered breeders were randomly selected from a weekly advertising newspaper. The litter sold most recently by each breeder was then enrolled in the study. Information pertaining to socialization practices for each litter was obtained through a questionnaire administered over the telephone. RESULTS-Registered breeders generally had more breeding bitches and had more litters than did nonregistered breeders. Litters of registered breeders were more likely to have been socialized with adult dogs, people of different appearances, and various environmental stimuli, compared with litters of nonregistered breeders. Litters from registered breeders were also much less likely to have been the result of an unplanned pregnancy. CONCLUSIONS AND CLINICAL RELEVANCE-Among those breeders represented, litters of registered breeders received more socialization experience, compared with litters of nonregistered breeders. People purchasing puppies from nonregistered breeders should focus on socializing their puppies between the time of purchase and 14 weeks of age. Additional research is required to determine whether puppies from nonregistered breeders are at increased risk of behavioral problems and are therefore more likely to be relinquished to animal shelters or euthanized, relative to puppies from registered breeders.

  17. A novel reverse flow reactor coupling endothermic and exothermic reactions: an experimental study

    NARCIS (Netherlands)

    van Sint Annaland, M.; Nijssen, R.C.

    2002-01-01

    A new reactor concept is studied for highly endothermic heterogeneously catalysed gas phase reactions at high temperatures with rapid but reversible catalyst deactivation. The reactor concept aims to achieve an indirect coupling of energy necessary for endothermic reactions and energy released by

  18. Experimental and numerical stability investigations on natural circulation boiling water reactors

    CERN Document Server

    Marcel, CP

    2007-01-01

    In the design of novel nuclear reactors active systems are replaced by passive ones in order to reduce the risk of failure. For that reason natural circulation is being considered as the primary cooling mechanism in next generation nuclear reactor designs

  19. Digestible Threonine Levels in the Starter Diet of Broilers Derived from Breeders of Different Ages

    Directory of Open Access Journals (Sweden)

    CBGS Tanure

    2015-12-01

    Full Text Available ABSTRACT The aim of this study was to evaluate the effect of digestible threonine supplementation in the starter diet on the performance, intestinal parameters, and nutrient metabolism of broilers derived from breeders of different ages. In total, 480 one-day-old Cobb chicks, derived from 38-or 49-week-oldbreeders, were housed in experimental battery cages until 21 days of age and fed four different threonine levels (800, 900, 1,000, or 1,100 mg/kg in the starter feed. A completely randomized experimental design in a 2x4 factorial arrangement (breeder age x threonine levels was applied, totaling eight treatments with five replicates of 12 birds each. Broilers from older breeders fed 800 mg digestible threonine/kg of diet presented higher weight gain, with a positive linear effect. There was also an interaction between breeder age and threonine levels for the weight gain of 21-d-old broilers supplemented at maximum level of 1,003 mg Thr/kg diet during the starter phase. There was no effect of breeder age or threonine levels on nutrient metabolism during the period of 17-21 days. There was no influence of breeder age or threonine levels in the starter diet on intestinal morphometric measurements, absorption area, or percentage of goblet cells.

  20. Design considerations and experimental observations for the TAMU air-cooled reactor cavity cooling system for the VHTR

    Energy Technology Data Exchange (ETDEWEB)

    Sulaiman, S. A., E-mail: shamsulamri@tamu.edu; Dominguez-Ontiveros, E. E., E-mail: elvisdom@tamu.edu; Alhashimi, T., E-mail: jbudd123@tamu.edu; Budd, J. L., E-mail: dubaiboy@tamu.edu; Matos, M. D., E-mail: mailgoeshere@gmail.com; Hassan, Y. A., E-mail: yhasssan@tamu.edu [Department of Nuclear Engineering, Texas A and M University, College Station, TX, 77843-3133 (United States)

    2015-04-29

    The Reactor Cavity Cooling System (RCCS) is a promising passive decay heat removal system for the Very High Temperature Reactor (VHTR) to ensure reliability of the transfer of the core residual and decay heat to the environment under all off-normal circumstances. A small scale experimental test facility was constructed at Texas A and M University (TAMU) to study pertinent multifaceted thermal hydraulic phenomena in the air-cooled reactor cavity cooling system (RCCS) design based on the General Atomics (GA) concept for the Modular High Temperature Gas-Cooled Reactor (MHTGR). The TAMU Air-Cooled Experimental Test Facility is ⅛ scale from the proposed GA-MHTGR design. Groundwork for experimental investigations focusing into the complex turbulence mixing flow behavior inside the upper plenum is currently underway. The following paper illustrates some of the chief design considerations used in construction of the experimental test facility, complete with an outline of the planned instrumentation and data acquisition methods. Computational Fluid Dynamics (CFD) simulations were carried out to furnish some insights on the overall behavior of the air flow in the system. CFD simulations assisted the placement of the flow measurement sensors location. Preliminary experimental observations of experiments at 120oC inlet temperature suggested the presence of flow reversal for cases involving single active riser at both 5 m/s and 2.25 m/s, respectively and four active risers at 2.25 m/s. Flow reversal may lead to thermal stratification inside the upper plenum by means of steady state temperature measurements. A Particle Image Velocimetry (PIV) experiment was carried out to furnish some insight on flow patterns and directions.

  1. Design considerations and experimental observations for the TAMU air-cooled reactor cavity cooling system for the VHTR

    Science.gov (United States)

    Sulaiman, S. A.; Dominguez-Ontiveros, E. E.; Alhashimi, T.; Budd, J. L.; Matos, M. D.; Hassan, Y. A.

    2015-04-01

    The Reactor Cavity Cooling System (RCCS) is a promising passive decay heat removal system for the Very High Temperature Reactor (VHTR) to ensure reliability of the transfer of the core residual and decay heat to the environment under all off-normal circumstances. A small scale experimental test facility was constructed at Texas A&M University (TAMU) to study pertinent multifaceted thermal hydraulic phenomena in the air-cooled reactor cavity cooling system (RCCS) design based on the General Atomics (GA) concept for the Modular High Temperature Gas-Cooled Reactor (MHTGR). The TAMU Air-Cooled Experimental Test Facility is ⅛ scale from the proposed GA-MHTGR design. Groundwork for experimental investigations focusing into the complex turbulence mixing flow behavior inside the upper plenum is currently underway. The following paper illustrates some of the chief design considerations used in construction of the experimental test facility, complete with an outline of the planned instrumentation and data acquisition methods. Computational Fluid Dynamics (CFD) simulations were carried out to furnish some insights on the overall behavior of the air flow in the system. CFD simulations assisted the placement of the flow measurement sensors location. Preliminary experimental observations of experiments at 120oC inlet temperature suggested the presence of flow reversal for cases involving single active riser at both 5 m/s and 2.25 m/s, respectively and four active risers at 2.25 m/s. Flow reversal may lead to thermal stratification inside the upper plenum by means of steady state temperature measurements. A Particle Image Velocimetry (PIV) experiment was carried out to furnish some insight on flow patterns and directions.

  2. Practitioners'--breeders' approach to canine parturition.

    Science.gov (United States)

    Freak, M J

    1975-04-05

    Both veterinary surgeon and dog breeder should be involved in assessing the whelping capability of brood bitches as one essential point in the selection of sound stock. Normal parturition is described in a manner that might be used in the instruction of breeders and nursing auxiliaries in midwifery. In its classical three stages, the mechanics and hydraulics are explained in simple terms and the hormonal changes discussed in relation to each stage. The type of co-operation desired between veterinary surgeon and breeder is discussed and the instruction to be given on the recognition of dystocia is outlined. Some commonly met dystocias are described. Simple digitally-assisted delivery by the midwife/breeder is described as are the forceps techniques which may be applied by the veterinary surgeon in the course of diagnosis and delivery.

  3. Major welfare issues in broiler breeders

    NARCIS (Netherlands)

    Jong, de I.C.; Guemene, D.

    2011-01-01

    Under current practices, broiler parent stock (broiler breeders) encounter several welfare problems, such as feed restriction and injury during mating. Intensive selection for production traits, especially growth rate, is associated with increased nutritious requirement and thus feed consumption,

  4. Hydrocarbon pyrolysis reactor experimentation and modeling for the production of solar absorbing carbon nanoparticles

    Science.gov (United States)

    Frederickson, Lee Thomas

    Much of combustion research focuses on reducing soot particulates in emissions. However, current research at San Diego State University (SDSU) Combustion and Solar Energy Laboratory (CSEL) is underway to develop a high temperature solar receiver which will utilize carbon nanoparticles as a solar absorption medium. To produce carbon nanoparticles for the small particle heat exchange receiver (SPHER), a lab-scale carbon particle generator (CPG) has been built and tested. The CPG is a heated ceramic tube reactor with a set point wall temperature of 1100-1300°C operating at 5-6 bar pressure. Natural gas and nitrogen are fed to the CPG where natural gas undergoes pyrolysis resulting in carbon particles. The gas-particle mixture is met downstream with dilution air and sent to the lab scale solar receiver. To predict soot yield and general trends in CPG performance, a model has been setup in Reaction Design CHEMKIN-PRO software. One of the primary goals of this research is to accurately measure particle properties. Mean particle diameter, size distribution, and index of refraction are calculated using Scanning Electron Microscopy (SEM) and a Diesel Particulate Scatterometer (DPS). Filter samples taken during experimentation are analyzed to obtain a particle size distribution with SEM images processed in ImageJ software. These results are compared with the DPS, which calculates the particle size distribution and the index of refraction from light scattering using Mie theory. For testing with the lab scale receiver, a particle diameter range of 200-500 nm is desired. Test conditions are varied to understand effects of operating parameters on particle size and the ability to obtain the size range. Analysis of particle loading is the other important metric for this research. Particle loading is measured downstream of the CPG outlet and dilution air mixing point. The air-particle mixture flows through an extinction tube where opacity of the mixture is measured with a 532 nm

  5. Parametric experimental tests of steam gasification of pine wood in a fluidized bed reactor

    Directory of Open Access Journals (Sweden)

    L. Vecchione

    2013-09-01

    Full Text Available Among Renewable Energy Sources (RES, biomass represent one of the most common and suitable solution in order to contribute to the global energy supply and to reduce greenhouse gases (GHG emissions. The disposal of some residual biomass, as pruning from pine trees, represent a problem for agricultural and agro-industrial sectors. But if the residual biomass are used for energy production can become a resource. The most suitable energy conversion technology for the above-mentioned biomass is gasification process because the high C/N ratio and the low moisture content, obtained from the analysis. In this work a small-pilot bubbling-bed gasification plant has been designed, constructed and used in order to obtain, from the pine trees pruning, a syngas with low tar and char contents and high hydrogen content. The activities showed here are part of the activities carried out in the European 7FP UNIfHY project. In particular the aim of this work is to develop experimental test on a bench scale steam blown fluidized bed biomass gasifier. These tests will be utilized in future works for the simulations of a pilot scale steam fluidized bed gasifier (100 kWth fed with different biomass feedstock. The results of the tests include produced gas and tar composition as well gas, tar and char yield. Tests on a bench scale reactor (8 cm I.D. were carried out varying steam to biomass ratio from 0.5, 0.7 and 1 to 830°C.

  6. Fast reactor: an experimental study of thermohydraulic processes in different operating regimes

    Science.gov (United States)

    Opanasenko, A. N.; Sorokin, A. P.; Zaryugin, D. G.; Trufanov, A. A.

    2017-05-01

    Results of integrated water model studies of temperature fields and a flow pattern of a nonisothermal primary coolant in the elements of the fast neutron reactor (hereinafter, fast reactor) primary circuit with primary sodium in different regimes, such as forced circulation (FC), transition to the reactor cooldown and emergency cooldown with natural coolant convection, are presented. It is shown that, under the influence of lift forces on the nonisothermal coolant flow in the upper chamber at the periphery of its bottom region over the side shields, a stable cold coolant isothermal zone is formed, whose dimensions increase with increase of total water flowrate. An essential and stable coolant temperature stratification is detected in the peripheral area of the upper (hot) chamber over the side shields, in the pressure and cold side chambers, in the elevator baffle, in the cooling system of the reactor vessel, and in the outlet of intermediate and autonomous heat exchangers in different operating regimes. Large gradients and temperature fluctuations are registered at the interface of stratified and recycling formations. In all of the studied cooldown versions, the coolant outlet temperature at the core fuel assembly is decreased and the coolant temperature in the peripheral zone of the upper chamber is increased compared to the FC. High performance of a passive emergency cooldown system of a fast reactor (BN-1200) with submersible autonomous heat exchangers (AHE) is confirmed. Thus, in a normal operation regime, even in case of malfunction of three submersible AHEs, the temperature of the equipment inside the reactor remains within acceptable limits and decay heat removal from the reactor does not exceed safe operation limits. The obtained results can be used both for computer code verification and for approximate estimate of the reactor plant parameters on the similarity criteria basis.

  7. Experimental evidences of95 mTc production in a nuclear reactor.

    Science.gov (United States)

    Cohen, I M; Robles, A; Mendoza, P; Airas, R M; Montoya, E H

    2018-02-02

    95 m Tc has been identified as by-product in some solutions of 99 m Tc obtained by irradiation of molybdenum trioxide in a reactor neutron flux. The characterization was carried out using both measurements by gamma spectrometry and half-life determination. The possible ways that lead to the 95 m Tc production in a nuclear reactor are discussed. Copyright © 2018. Published by Elsevier Ltd.

  8. Experimental evaluation of gamma fluence-rate predictions from Argon-41 releases to the atmosphere over a nuclear research reactor site

    DEFF Research Database (Denmark)

    Rojas-Palma, C.; Aage, H.K.; Astrup, P.

    2004-01-01

    An experimental study of radionuclide dispersion in the atmosphere has been conducted at the BR1 research reactor in Mol, Belgium. Artificially generated aerosols ('white smoke') were mixed with the routine releases of Ar-41 in the reactor's 60-m tall venting stack. The detailed plume geometry...

  9. Analysis and Experimental Qualification of an Irradiation Capsule Design for Testing Pressurized Water Reactor Fuel Cladding in the High Flux Isotope Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Kurt R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howard, Richard H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Daily, Charles R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Petrie, Christian M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-09-01

    The Advanced Fuels Campaign within the Fuel Cycle Research and Development program of the Department of Energy Office of Nuclear Energy is currently investigating a number of advanced nuclear fuel cladding concepts to improve the accident tolerance of light water reactors. Alumina-forming ferritic alloys (e.g., FeCrAl) are some of the leading candidates to replace traditional zirconium alloys due to their superior oxidation resistance, provided no prohibitive irradiation-induced embrittlement occurs. Oak Ridge National Laboratory has developed experimental designs to irradiate thin-walled cladding tubes with representative pressurized water reactor geometry in the High Flux Isotope Reactor (HFIR) under relevant temperatures. These designs allow for post-irradiation examination (PIE) of cladding that closely resembles expected commercially viable geometries and microstructures. The experiments were designed using relatively inexpensive rabbit capsules for the irradiation vehicle. The simplistic designs combined with the extremely high neutron flux in the HFIR allow for rapid testing of a large test matrix, thus reducing the time and cost needed to advanced cladding materials closer to commercialization. The designs are flexible in that they allow for testing FeCrAl alloys, stainless steels, Inconel alloys, and zirconium alloys (as a reference material) both with and without hydrides. This will allow a direct comparison of the irradiation performance of advanced cladding materials with traditional zirconium alloys. PIE will include studies of dimensional change, microstructure variation, mechanical performance, etc. This work describes the capsule design, neutronic and thermal analyses, and flow testing that were performed to support the qualification of this new irradiation vehicle.

  10. Design of a helium-cooled molten salt fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Fulton, F.J.; Huegel, F.; Neef, W.S. Jr.; Sherwood, A.E.; Berwald, D.H.; Whitley, R.H.; Wong, C.P.C.; DeVan, J.H.

    1985-02-01

    A new conceptual blanket design for a fusion reactor produces fissile material for fission power plants. Fission is suppressed by using beryllium, rather than uranium, to multiply neutrons and also by minimizing the fissile inventory. The molten-salt breeding media (LiF + BeF/sub 2/ + TghF/sub 4/) is circulated through the blanket and on to the online processing system where /sup 233/U and tritium are continuously removed. Helium cools the blanket including the steel pipes containing the molten salt. Austenitic steel was chosen because of its ease of fabrication, adequate radiation-damage lifetime, and low corrosion rate by molten salt. We estimate the breeder, having 3000 MW of fusion power, produces 6400 kg of /sup 233/U per year, which is enough to provide make up for 20 GWe of LWR per year (or 14 LWR plants of 4440 MWt) or twice that many HTGRs or CANDUs. Safety is enhanced because the afterheat is low and the blanket materials do not react with air or water. The fusion breeder based on a pre-MARS tandem mirror is estimated to cost $4.9B or 2.35 times an LWR of the same power. The estimated present value cost of the /sup 2/anumber/sup 3/U produced is $40/g if utility financed or $16/g if government financed.

  11. Uranium resources and their implications for fission breeder and fusion hybrid development

    Energy Technology Data Exchange (ETDEWEB)

    Max, C.E.

    1984-05-15

    Present estimates of uranium resources and reserves in the US and the non-Communist world are reviewed. The resulting implications are considered for two proposed breeder technologies: the liquid metal fast breeder reactor (LMFBR) and the fusion hybrid reactor. Using both simple arguments and detailed scenarios from the published literature, conditions are explored under which the LMFBR and fusion hybrid could respectively have the most impact, considering both fuel-supply and economic factors. The conclusions emphasize strong potential advantages of the fusion hybrid, due to its inherently large breeding rate. A discussion is presented of proposed US development strategies for the fusion hybrid, which at present is far behind the LMFBR in its practical application and maturity.

  12. Plutonium Worlds. Fast Breeders, Systems Analysis and Computer Simulation in the Age of Hypotheticality

    OpenAIRE

    Sebastian Vehlken

    2014-01-01

    This article examines the media history of one of the hallmark civil nuclear energy programs in Western Germany – the development of Liquid Metal Fast Breeder Reactor (LMFBR) technology. Promoted as a kind of perpetuum mobile of the Atomic Age, the "German Manhattan Project" not only imported big science thinking. In its context, nuclear technology was also put forth as an avantgarde of scientific inquiry, dealing with the most complex and critical technological endeavors. In the face of the ...

  13. Experimental and Thermalhydraulic Code Assessment of the Transient Behavior of the Passive Condenser System in an Advanced Boiling Water Reactor

    Energy Technology Data Exchange (ETDEWEB)

    S.T. Revankar; W. Zhou; Gavin Henderson

    2008-07-08

    The main goal of the project was to study analytically and experimentally the condensation heat transfer for the passive condenser system such as GE Economic Simplified Boiling Water Reactor (ESBWR). The effect of noncondensable gas in condenser tube and the reduction of secondary pool water level to the condensation heat transfer coefficient was the main focus in this research. The objectives of this research were to : 1) obtain experimental data on the local and tube averaged condensation heat transfer rates for the PCCS with non-condensable and with change in the secondary pool water, 2) assess the RELAP5 and TRACE computer code against the experimental data, and 3) develop mathematical model and ehat transfer correlation for the condensation phenomena for system code application. The project involves experimentation, theoretical model development and verification, and thermal- hydraulic codes assessment.

  14. Experimental and MCNP5 based evaluation of neutron and gamma flux in the irradiation ports of the University of Utah research reactor

    Directory of Open Access Journals (Sweden)

    Noble Brooklyn

    2012-01-01

    Full Text Available Neutron and gamma flux environment of various irradiation ports in the University of Utah training, research, isotope production, general atomics reactor were experimentally assessed and fully modeled using the MCNP5 code. The experimental measurements were based on the cadmium ratio in the irradiation ports of the reactor, flux profiling using nickel wire, and gamma dose measurements using thermo luminescence dosimeter. Full 3-D MCNP5 reactor model was developed to obtain the neutron flux distributions of the entire reactor core and to compare it with the measured flux focusing at the irradiation ports. Integration of all these analysis provided the updated comprehensive neutron-gamma flux maps of the existing irradiation facilities of the University of Utah TRIGA reactor.

  15. Evaluation of integral continuing experimental capability (CEC) concepts for light water reactor research: PWR scaling concepts

    Energy Technology Data Exchange (ETDEWEB)

    Condie, K G; Larson, T K; Davis, C B; McCreery, G E

    1987-02-01

    In this report reactor transients and thermal-hydraulic phenomena of importance (based on probabilistic risk assessment and the International Code Assessment Program) to reactor safety were examined and identified. Established scaling methodologies were used to develop potential concepts for integral thermal-hydraulic testing facilities. Advantages and disadvantages of each concept are evaluated. Analysis is conducted to examine the scaling of various phenomena in each of the selected concepts. Results generally suggest that a facility capable of operating at typical reactor operating conditions will scale most phenomena reasonably well. Although many phenomena in facilities using Freon or water at nontypical pressure will scale reasonably well, those phenomena that are heavily dependent on quality (heat transfer or critical flow for example) can be distorted. Furthermore, relation of data produced in facilities operating with nontypical fluids or at nontypical pressures to large plants will be a difficult and time consuming process.

  16. Verification and Validation of the PLTEMP/ANL Code for Thermal-Hydraulic Analysis of Experimental and Test Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kalimullah, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Olson, Arne P. [Argonne National Lab. (ANL), Argonne, IL (United States); Feldman, E. E. [Argonne National Lab. (ANL), Argonne, IL (United States); Hanan, N. [Argonne National Lab. (ANL), Argonne, IL (United States); Dionne, B. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-04-07

    The document compiles in a single volume several verification and validation works done for the PLTEMP/ANL code during the years of its development and improvement. Some works that are available in the open literature are simply referenced at the outset, and are not included in the document. PLTEMP has been used in conversion safety analysis reports of several US and foreign research reactors that have been licensed and converted. A list of such reactors is given. Each chapter of the document deals with the verification or validation of a specific model. The model verification is usually done by comparing the code with hand calculation, Microsoft spreadsheet calculation, or Mathematica calculation. The model validation is done by comparing the code with experimental data or a more validated code like the RELAP5 code.

  17. Screening of Gas-Cooled Reactor Thermal-Hydraulic and Safety Analysis Tools and Experimental Database

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Jae; Kim, Min Hwan; Lee, Seung Wook (and others)

    2007-08-15

    This report is a final report of I-NERI Project, 'Screening of Gas-cooled Reactor Thermal Hydraulic and Safety Analysis Tools and Experimental Database 'jointly carried out by KAERI, ANL and INL. In this study, we developed the basic technologies required to develop and validate the VHTR TH/safety analysis tools and evaluated the TH/safety database information. The research tasks consist of; 1) code qualification methodology (INL), 2) high-level PIRTs for major nucleus set of events (KAERI, ANL, INL), 3) initial scaling and scoping analysis (ANL, KAERI, INL), 4) filtering of TH/safety tools (KAERI, INL), 5) evaluation of TH/safety database information (KAERI, INL, ANL) and 6) key scoping analysis (KAERI). The code qualification methodology identifies the role of PIRTs in the R and D process and the bottom-up and top-down code validation methods. Since the design of VHTR is still evolving, we generated the high-level PIRTs referencing 600MWth block-type GT-MHR and 400MWth pebble-type PBMR. Nucleus set of events that represents the VHTR safety and operational transients consists of the enveloping scenarios of HPCC (high pressure conduction cooling: loss of primary flow), LPCC/Air-Ingress (low pressure conduction cooling: loss of coolant), LC (load changes: power maneuvering), ATWS (anticipated transients without scram: reactivity insertion), WS (water ingress: water-interfacing system break) and HU (hydrogen-side upset: loss of heat sink). The initial scaling analysis defines dimensionless parameters that need to be reflected in mixed convection modeling and the initial scoping analysis provided the reference system transients used in the PIRTs generation. For the PIRTs phenomena, we evaluated the modeling capability of the candidate TH/safety tools and derived a model improvement need. By surveying and evaluating the TH/safety database information, a tools V and V matrix has been developed. Through the key scoping analysis using available database, the

  18. Development of fuels and structural materials for fast breeder reactors

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    detrimental especially from welding considerations, and globular oxides are least harmful. For grades 304L(N) and 316L(N) SS, the grain size number is specified as larger than ASTM. No. 2 (i.e., a finer grain size), to achieve optimum high temperature mechanical properties and to permit meaningful ultrasonic examination.

  19. Conceptual design of Indian molten salt breeder reactor

    Indian Academy of Sciences (India)

    cooled options. Another option, which ... the quantity of waste. It is thus an optimum solution for meeting the energy needs of a large country like India in a sustainable manner, securing its energy freedom in the long term. Schematic of Indian ...

  20. Experimental investigation into fast pyrolysis of biomass using an entrained flow reactor

    Science.gov (United States)

    Bohn, M.; Benham, C.

    1981-02-01

    Pyrolysis experiments were performed with steam as a carrier gas and two different feedstocks - wheat straw and powdered material derived from municipal solid waste (ECO-II TM). Reactor wall temperature was varied from 7000 to 1400 C. Gas composition data from the ECO-II tests were comparable to previously reported data but ethylene yield appeared to vary with reactor wall temperature and residence time. The important conclusion from the wheat straw tests is that olefin yields are about one half that obtained from ECO-II. Evidence was found that high olefin yields from ECO-II are due to the presence of plastics in the feedstock.

  1. Evaluation of activation detectors for the SPHINX project at the LR-0 experimental reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lahodova, Zdena; Viererbl, Ladislav [Research Center Rez Ltd (Czech Republic); Novak, Evzen; Svadlenkova, Marie; Rypar, Vojtech [Nuclear Power and Safety Division, Nuclear Research Institute Rez plc (Czech Republic)

    2008-07-01

    This article summarizes the measurements of neutron fluence distributions carried out at the LR-0 research reactor (Czech Republic) in the frame of the SPHINX project. The influence of fluoride-salts or graphite filling in the SR-0 modules on neutron spectrum was studied using activation detectors. The activation detectors (Mn, Ni, In and Au) were evaluated to determine the changes in neutron field. The In and Au detectors were also irradiated with a cadmium cover. Five different configurations of reactor core (EROS) were realized. (authors)

  2. Experimental evaluation of methane dry reforming process on a membrane reactor to hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Fabiano S.A.; Benachour, Mohand; Abreu, Cesar A.M. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. of Chemical Engineering], Email: f.aruda@yahoo.com.br

    2010-07-01

    In a fixed bed membrane reactor evaluations of methane-carbon dioxide reforming over a Ni/{gamma}- Al{sub 2}O{sub 3} catalyst were performed at 773 K, 823 K and 873 K. A to convert natural gas into syngas a fixed-bed reactor associate with a selective membrane was employed, where the operating procedures allowed to shift the chemical equilibrium of the reaction in the direction of the products of the process. Operations under hydrogen permeation, at 873 K, promoted the increase of methane conversion, circa 83%, and doubled the yield of hydrogen production, when compared with operations where no hydrogen permeation occurred. (author)

  3. Hydrogen production by reforming of liquid hydrocarbons in a membrane reactor for portable power generation-Experimental studies

    Science.gov (United States)

    Damle, Ashok S.

    One of the most promising technologies for lightweight, compact, portable power generation is proton exchange membrane (PEM) fuel cells. PEM fuel cells, however, require a source of pure hydrogen. Steam reforming of hydrocarbons in an integrated membrane reactor has potential to provide pure hydrogen in a compact system. Continuous separation of product hydrogen from the reforming gas mixture is expected to increase the yield of hydrogen significantly as predicted by model simulations. In the laboratory-scale experimental studies reported here steam reforming of liquid hydrocarbon fuels, butane, methanol and Clearlite ® was conducted to produce pure hydrogen in a single step membrane reformer using commercially available Pd-Ag foil membranes and reforming/WGS catalysts. All of the experimental results demonstrated increase in hydrocarbon conversion due to hydrogen separation when compared with the hydrocarbon conversion without any hydrogen separation. Increase in hydrogen recovery was also shown to result in corresponding increase in hydrocarbon conversion in these studies demonstrating the basic concept. The experiments also provided insight into the effect of individual variables such as pressure, temperature, gas space velocity, and steam to carbon ratio. Steam reforming of butane was found to be limited by reaction kinetics for the experimental conditions used: catalysts used, average gas space velocity, and the reactor characteristics of surface area to volume ratio. Steam reforming of methanol in the presence of only WGS catalyst on the other hand indicated that the membrane reactor performance was limited by membrane permeation, especially at lower temperatures and lower feed pressures due to slower reconstitution of CO and H 2 into methane thus maintaining high hydrogen partial pressures in the reacting gas mixture. The limited amount of data collected with steam reforming of Clearlite ® indicated very good match between theoretical predictions and

  4. Students' Assessment of Interactive Distance Experimentation in Nuclear Reactor Physics Laboratory Education

    Science.gov (United States)

    Malkawi, Salaheddin; Al-Araidah, Omar

    2013-01-01

    Laboratory experiments develop students' skills in dealing with laboratory instruments and physical processes with the objective of reinforcing the understanding of the investigated subject. In nuclear engineering, where research reactors play a vital role in the practical education of students, the high cost and long construction time of research…

  5. Experimental and numerical stability investigations on natural circulation boiling water reactors

    NARCIS (Netherlands)

    Marcel, C.P.

    2007-01-01

    The stability of natural circulation boiling water reactors is investigated with a strong emphasis on experiments. Two different facilities are used for such a task: the GENESIS facility (to which a void reactivity feedback system is artificially added) and the CIRCUS facility. In addition,

  6. Experimental computer-controlled instrumentation system for the research reactor DR2

    DEFF Research Database (Denmark)

    Goodstein, L.P.

    1969-01-01

    An instrumentation system has been developed for one of the Danish Atomic Energy Commission's research reactors as part of an experiment on the advantages to be gained by the use of digital computers in a process plant application. Problem areas to be investigated include (a) reliability and safety...

  7. Experimental analysis of arsenic precipitation during microbial sulfate and iron reduction in model aquifer sediment reactors

    Science.gov (United States)

    Kirk, Matthew F.; Roden, Eric E.; Crossey, Laura J.; Brealey, Adrian J.; Spilde, Michael N.

    2010-05-01

    Microbial SO 42- reduction limits accumulation of aqueous As in reducing aquifers where the sulfide that is produced forms minerals that sequester As. We examined the potential for As partitioning into As- and Fe-sulfide minerals in anaerobic, semi-continuous flow bioreactors inoculated with 0.5% (g mL -1) fine-grained alluvial aquifer sediment. A fluid residence time of three weeks was maintained over a ca. 300-d incubation period by replacing one-third of the aqueous phase volume of the reactors with fresh medium every seven days. The medium had a composition comparable to natural As-contaminated groundwater with slightly basic pH (7.3) and 7.5 μM aqueous As(V) and also contained 0.8 mM acetate to stimulate microbial activity. Medium was delivered to a reactor system with and without 10 mmol L -1 synthetic goethite (α-FeOOH). In both reactors, influent As(V) was almost completely reduced to As(III). Pure As-sulfide minerals did not form in the Fe-limited reactor. Realgar (As 4S 4) and As 2S 3(am) were undersaturated throughout the experiment. Orpiment (As 2S 3) was saturated while sulfide content was low (˜50 to 150 μM), but precipitation was likely limited by slow kinetics. Reaction-path modeling suggests that, even if these minerals had formed, the dissolved As content of the reactor would have remained at hazardous levels. Mackinawite (Fe 1 + xS; x ⩽ 0.07) formed readily in the Fe-bearing reactor and held dissolved sulfide at levels below saturation for orpiment and realgar. The mackinawite sequestered little As (<0.1 wt.%), however, and aqueous As accumulated to levels above the influent concentration as microbial Fe(III) reduction consumed goethite and mobilized adsorbed As. A relatively small amount of pyrite (FeS 2) and greigite (Fe 3S 4) formed in the Fe-bearing reactor when we injected a polysulfide solution (Na 2S 4) to a final concentration of 0.5 mM after 216, 230, 279, and 286 days. The pyrite, and to a lesser extent the greigite, that formed

  8. Thermal control of solid breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Raffray, A.R.; Ying, A.; Gorbis, Z.; Tillack, M.S.; Abdou, M.A.

    1991-12-31

    An assessment of the thermal control mechanisms applicable to solid breeder blanket designs under ITER-like operating conditions is presented in this paper. Four cases are considered: a helium gap; a sintered block Be region; a sintered block helium region with a metallic felt at the Be/clad interface; and a Be packed bed region. For these cases, typical operating are explored to determine the ranges of wall load which can be accommodated while maintaining the breeder within its allowable operating temperature window. The corresponding region thicknesses are calculated to help identify practicality and design tolerances.

  9. Thermal control of solid breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Raffray, A.R.; Ying, A.; Gorbis, Z.; Tillack, M.S.; Abdou, M.A.

    1991-01-01

    An assessment of the thermal control mechanisms applicable to solid breeder blanket designs under ITER-like operating conditions is presented in this paper. Four cases are considered: a helium gap; a sintered block Be region; a sintered block helium region with a metallic felt at the Be/clad interface; and a Be packed bed region. For these cases, typical operating are explored to determine the ranges of wall load which can be accommodated while maintaining the breeder within its allowable operating temperature window. The corresponding region thicknesses are calculated to help identify practicality and design tolerances.

  10. COMPUTATIONAL AND EXPERIMENTAL MODELING OF THREE-PHASE SLURRY-BUBBLE COLUMN REACTOR

    Energy Technology Data Exchange (ETDEWEB)

    Isaac K. Gamwo; Dimitri Gidaspow

    1999-09-01

    Considerable progress has been achieved in understanding three-phase reactors from the point of view of kinetic theory. In a paper in press for publication in Chemical Engineering Science (Wu and Gidaspow, 1999) we have obtained a complete numerical solution of bubble column reactors. In view of the complexity of the simulation a better understanding of the processes using simplified analytical solutions is required. Such analytical solutions are presented in the attached paper, Large Scale Oscillations or Gravity Waves in Risers and Bubbling Beds. This paper presents analytical solutions for bubbling frequencies and standing wave flow patterns. The flow patterns in operating slurry bubble column reactors are not optimum. They involve upflow in the center and downflow at the walls. It may be possible to control flow patterns by proper redistribution of heat exchangers in slurry bubble column reactors. We also believe that the catalyst size in operating slurry bubble column reactors is not optimum. To obtain an optimum size we are following up on the observation of George Cody of Exxon who reported a maximum granular temperature (random particle kinetic energy) for a particle size of 90 microns. The attached paper, Turbulence of Particles in a CFB and Slurry Bubble Columns Using Kinetic Theory, supports George Cody's observations. However, our explanation for the existence of the maximum in granular temperature differs from that proposed by George Cody. Further computer simulations and experiments involving measurements of granular temperature are needed to obtain a sound theoretical explanation for the possible existence of an optimum catalyst size.

  11. The effect of γ-radiation in Li{sub 4}SiO{sub 4} ceramic breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Carella, E., E-mail: elisabetta.carella@externos.ciemat.es [UNED Foundation, C/Francisco de Rojas, 2, 28010 Madrid (Spain); National Fusion Laboratory, CIEMAT, Av. Complutense 40, 28040 Madrid (Spain); Hernández, T. [National Fusion Laboratory, CIEMAT, Av. Complutense 40, 28040 Madrid (Spain)

    2015-01-15

    Highlights: • Li{sub 4}SiO{sub 4} is γ-irradiated with different doses (5, 10 and 13 MGy) and its electrical bulk conductivity measured by EIS. • The electrical measurements are compared with SiO{sub 2} confirming the charge carrier role of Li{sup +} under thermal activation. • The recombination effect of temperature during irradiation has been observed. - Abstract: Lithium orthosilicate (Li{sub 4}SiO{sub 4}) is considered one of the best candidates for the solid breeder blanket system (BBs) of future thermonuclear reactors. During reactor operation it will be bombarded by neutrons and gamma radiation which may alter its composition and properties, affecting its shielding role. The electrochemical impedance spectroscopy (EIS) is here used as a non-destructive tool for monitoring the electrical bulk conductivity of Li{sub 4}SiO{sub 4} ceramic after different ionizing damaging treatments. The compound fabricated in our laboratories, was irradiated by a {sup 60}Co in the Nayade-facility (CIEMAT-Spain). Several studies with slight experimental variations were realized and here presented to understand the dynamic of the charge carriers’ movement and the role of intrinsic and extrinsic defects on the electrical properties of this candidate ceramic.

  12. Theoretical and experimental study of the dark signal in CMOS image sensors affected by neutron radiation from a nuclear reactor

    Science.gov (United States)

    Xue, Yuanyuan; Wang, Zujun; He, Baoping; Yao, Zhibin; Liu, Minbo; Ma, Wuying; Sheng, Jiangkun; Dong, Guantao; Jin, Junshan

    2017-12-01

    The CMOS image sensors (CISs) are irradiated with neutron from a nuclear reactor. The dark signal in CISs affected by neutron radiation is studied theoretically and experimentally. The Primary knock-on atoms (PKA) energy spectra for 1 MeV incident neutrons are simulated by Geant4. And the theoretical models for the mean dark signal, dark signal non-uniformity (DSNU) and dark signal distribution versus neutron fluence are established. The results are found to be in good agreement with the experimental outputs. Finally, the dark signal in the CISs under the different neutron fluence conditions is estimated. This study provides the theoretical and experimental evidence for the displacement damage effects on the dark signal CISs.

  13. Presentation and comparison of experimental critical heat flux data at conditions prototypical of light water small modular reactors

    Energy Technology Data Exchange (ETDEWEB)

    Greenwood, M.S., E-mail: 1greenwoodms@ornl.gov; Duarte, J.P.; Corradini, M.

    2017-06-15

    Highlights: • Low mass flux and moderate to high pressure CHF experimental results are presented. • Facility uses chopped-cosine heater profile in a 2 × 2 square bundle geometry. • The EPRI, CISE-GE, and W-3 CHF correlations provide reasonable average CHF prediction. • Neural network analysis predicts experimental data and demonstrates utility of method. - Abstract: The critical heat flux (CHF) is a two-phase flow phenomenon which rapidly decreases the efficiency of the heat transfer performance at a heated surface. This phenomenon is one of the limiting criteria in the design and operation of light water reactors. Deviations of operating parameters greatly alters the CHF condition and must be experimentally determined for any new parameters such as those proposed in small modular reactors (SMR) (e.g. moderate to high pressure and low mass fluxes). Current open literature provides too little data for functional use at the proposed conditions of prototypical SMRs. This paper presents a brief summary of CHF data acquired from an experimental facility at the University of Wisconsin-Madison designed and built to study CHF at high pressure and low mass flux ranges in a 2 × 2 chopped cosine rod bundle prototypical of conceptual SMR designs. The experimental CHF test inlet conditions range from pressures of 8–16 MPa, mass fluxes of 500–1600 kg/m2 s, and inlet water subcooling from 250 to 650 kJ/kg. The experimental data is also compared against several accepted prediction methods whose application ranges are most similar to the test conditions.

  14. Impact of Feeding Systems and Hatchery Vaccination Programs on Immune System Development, Salmonella Colonization, Clearance of E. Coli and Reproductive Traits In Broiler Breeder Pullets

    Science.gov (United States)

    Broiler breeder pullets from a single grandparent flock were vaccinated at 19 days of embryonation with Marek's vaccines HVT +SB1 or a Vector HVT + Infectious bursal disease (IBD) vaccine. The birds were placed in an experimental broiler breeder facility at the University of Georgia and fed ad libit...

  15. Theoretical and Experimental Evaluation of the Temperature Distribution in a Dry Type Air Core Smoothing Reactor of HVDC Station

    Directory of Open Access Journals (Sweden)

    Yu Wang

    2017-05-01

    Full Text Available The outdoor ultra-high voltage (UHV dry-type air-core smoothing reactors (DASR of High Voltage Direct Current systems are equipped with a rain cover and an acoustic enclosure. To study the convective heat transfer between the DASR and the surrounding air, this paper presents a coupled model of the temperature and fluid field based on the structural features and cooling manner. The resistive losses of encapsulations calculated by finite element method (FEM were used as heat sources in the thermal analysis. The steady fluid and thermal field of the 3-D reactor model were solved by the finite volume method (FVM, and the temperature distribution characteristics of the reactor were obtained. Subsequently, the axial and radial temperature distributions of encapsulation were investigated separately. Finally, an optical fiber temperature measurement scheme was used for an UHV DASR under natural convection conditions. Comparative analysis showed that the simulation results are in good agreement with the experimental data, which verifies the rationality and accuracy of the numerical calculation. These results can serve as a reference for the optimal design and maintenance of UHV DASRs.

  16. Experimental studies on catalytic hydrogen recombiners for light water reactors; Experimentelle Untersuchungen zu katalytischen Wasserstoffkombinatoren fuer Leichtwasserreaktoren

    Energy Technology Data Exchange (ETDEWEB)

    Drinovac, P.

    2006-06-19

    In the course of core melt accidents in nuclear power plants a large amount of hydrogen can be produced and form an explosive or even detonative gas mixture with aerial oxygen in the reactor building. In the containment atmosphere of pressurized water reactors hydrogen combines a phlogistically with the oxygen present to form water vapor even at room temperature. In the past, experimental work conducted at various facilities has contributed little or nothing to an understanding of the operating principles of catalytic recombiners. Hence, the purpose of the present study was to conduct detailed investigations on a section of a recombiner essentially in order to deepen the understanding of reaction kinetics and heat transport processes. The results of the experiments presented in this dissertation form a large data base of measurements which provides an insight into the processes taking place in recombiners. The reaction-kinetic interpretation of the measured data confirms and deepens the diffusion theory - proposed in an earlier study. Thus it is now possible to validate detailed numeric models representing the processes in recombiners. Consequently the present study serves to broaden and corroborate competence in this significant area of reactor technology. In addition, the empirical knowledge thus gained may be used for a critical reassessment of previous numeric model calculations. (orig.)

  17. In-reactor creep behavior of selected ferritic alloys

    Energy Technology Data Exchange (ETDEWEB)

    Puigh, R.J.; Wire, G.L.

    1983-01-01

    An experiment was conducted in the Experimental Breeder Reactor-II (EBR-II) to investigate the in-reactor creep behavior of selected ferritic alloys. Pressurized tube creep specimens fabricated from the following ferritic alloys: HT-9, 9Cr-2Mo, and 2-1/4Cr-1Mo, were irradiated in EBR-II to a peak fluence of 2.8 x 10/sup 22/ n/cm/sup 2/ (E > 0.1 MeV) and at irradiation temperatures of 443, 505 and 572/sup 0/C. Each alloy had four specimens with midwall hoop stresses of 0, 50, 75 and 100 MPa at each irradiation temperature. Measurements of the zero-stressed specimens indicate that none of the ferritic alloys are exhibiting evidence for swelling or phase transformations at these irradiation temperatures and at a fluence of 2.8 x 10/sup 22/ n/cm/sup 2/ (E > 0.1 MeV).

  18. A statistical experimental design to remove sulfate by crystallization in a fluidized-bed reactor

    OpenAIRE

    Mark Daniel G. de Luna; Rance, Diana Pearl M.; Luzvisminda M. Bellotindos; Lu, Ming-Chun

    2016-01-01

    This study used crystallization in a fluidized-bed reactor as an alternative technology to the conventional chemical precipitation to remove sulfate. The Box-Behnken Design was used to study the effects and interactions of seed dosage of synthetic gypsum, initial sulfate concentration and molar ratio of calcium to sulfate on conversion and removal of sulfate. The optimum conditions of conversion and removal of sulfate were determined and used to treat the simulated acid mine drainage (AMD) wa...

  19. The SPES3 Experimental Facility Design for the IRIS Reactor Simulation

    Directory of Open Access Journals (Sweden)

    Mario Carelli

    2009-01-01

    Full Text Available IRIS is an advanced integral pressurized water reactor, developed by an international consortium led by Westinghouse. The licensing process requires the execution of integral and separate effect tests on a properly scaled reactor simulator for reactor concept, safety system verification, and code assessment. Within the framework of an Italian R&D program on Nuclear Fission, managed by ENEA and supported by the Ministry of Economic Development, the SPES3 facility is under design and will be built and operated at SIET laboratories. SPES3 simulates the primary, secondary, and containment systems of IRIS with 1 : 100 volume scale, full elevation, and prototypical thermal-hydraulic conditions. The simulation of the facility with the RELAP5 code and the execution of the tests will provide a reliable tool for data extrapolation and safety analyses of the final IRIS design. This paper summarises the main design steps of the SPES3 integral test facility, underlying choices and phases that lead to the final design.

  20. Experimental Study on Ash-Returned Reactor of CFB Atmospheric Air Gasifier

    Science.gov (United States)

    Shihong, Zhang; Luning, Tian; Xianrong, Zhou; Hanping, Chen; Haiping, Yang; Xianhua, Wang

    In an attempt to improve the gasification efficiency and decrease the carbon content in fly ash of atmospheric air CFB gasifiers, an innovatory equipment by name ash-returned reactor is put forward by SKLCC. Ash-returned reactor is an ash-returned apparatus on line of ash circulation, typically like "U" type valve in CFB boilers, with additional function of some extent combustion of residual carbon and increase the furnace inlet temperature of returning ash, and hence the coal conversion of gasifiers is enhanced. As to its configuration compared to conventional "U" type valve, ash-returned rector has two distinguished features of several times of height scale of fluidizing transportation region to meet the combustion reaction time need and appropriate heat transfer tube bundles arranged in the region to moderate the local temperature so as to avoid slagging. And hence, corresponding to the structure renovation, the material transportation and regulation performance of ash-returned reactor is primarily investigated through a series of experiments in a cold lab-scale facility in this paper. The heat transfer characteristic of the tube bundles is then researched and its influential factors are further discussed. These works lay a foundation on the following study of hot state experiments and industrial applications.

  1. Experimental Studies on Assemblies 1 and 2 of the Fast Reactor FR-0. Part 2

    Energy Technology Data Exchange (ETDEWEB)

    Hellstrand, E.; Andersson, T.L.; Brunfelter, B.; Kockum, J.; Londen, S.O.; Tiren, L.I.

    1965-12-15

    In a first part of this report, published as AE-195, an account was given of critical mass determinations and measurements of flux distribution and reaction ratios in the first assemblies of the fast zero power reactor FR0. This second part of the report deals with various investigations involving the measurement of reactivity. Control rod calibrations have been made using the positive period, the inverse multiplication, the rod drop and the pulsed source techniques, and show satisfactory agreement between the various methods. The reactivity worths of samples of different materials and different sizes have been measured at the core centre. Comparisons with perturbation calculations show that the regular and adjoint fluxes are well predicted in the central region of the core. The variation in the prompt neutron life-time with reactivity has been studied by means of the pulsed source and the Rossi-{alpha} techniques. Comparison with one region calculations reveals large discrepancies, indicating that this simple model is inadequate. Some investigations of streaming effects in an empty channel in the reactor and of interaction effects between channels have been made and are compared with theoretical estimates. Measurements of the reactivity worth of an air gap between the reactor halves and of the temperature coefficient are also described in the report. The work has been performed as a joint effort by AB Atomenergi and the Research Institute of National Defence.

  2. Modeling and Experimental Studies of Mercury Oxidation and Adsorption in a Fixed-Bed and Entrained-Flow Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Buitrago, Paula A. [Univ. of Utah, Salt Lake City, UT (United States); Morrill, Mike [Univ. of Utah, Salt Lake City, UT (United States); Lighty, JoAnn S. [Univ. of Utah, Salt Lake City, UT (United States); Silcox, Geoffrey D. [Univ. of Utah, Salt Lake City, UT (United States)

    2009-06-01

    This report presents experimental and modeling mercury oxidation and adsorption data. Fixed-bed and single-particle models of mercury adsorption were developed. The experimental data were obtained with two reactors: a 300-W, methane-fired, tubular, quartz-lined reactor for studying homogeneous oxidation reactions and a fixed-bed reactor, also of quartz, for studying heterogeneous reactions. The latter was attached to the exit of the former to provide realistic combustion gases. The fixed-bed reactor contained one gram of coconut-shell carbon and remained at a temperature of 150°C. All methane, air, SO2, and halogen species were introduced through the burner to produce a radical pool representative of real combustion systems. A Tekran 2537A Analyzer coupled with a wet conditioning system provided speciated mercury concentrations. At 150°C and in the absence of HCl or HBr, the mercury uptake was about 20%. The addition of 50 ppm HCl caused complete capture of all elemental and oxidized mercury species. In the absence of halogens, SO2 increased the mercury adsorption efficiency to up to 30 percent. The extent of adsorption decreased with increasing SO2 concentration when halogens were present. Increasing the HCl concentration to 100 ppm lessened the effect of SO2. The fixed-bed model incorporates Langmuir adsorption kinetics and was developed to predict adsorption of elemental mercury and the effect of multiple flue gas components. This model neglects intraparticle diffusional resistances and is only applicable to pulverized carbon sorbents. It roughly describes experimental data from the literature. The current version includes the ability to account for competitive adsorption between mercury, SO2, and NO2. The single particle model simulates in-flight sorbent capture of elemental mercury. This model was developed to include Langmuir and Freundlich isotherms, rate equations, sorbent feed rate, and

  3. Experimental studies into the thermal-hydraulic performance of the VK-300 reactor based on a draft tube model

    Directory of Open Access Journals (Sweden)

    N.P. Serdun

    2015-12-01

    Full Text Available The paper presents an experimental study into the thermal-hydraulic performance of the VK-300 reactor based on a model of a single draft tube at a pressure of 3.4MPa, various flow rates and the model inlet relative enthalpies of –0.05 to 0.2. The experimental procedures include generation of a steam-water mixture circulation with a preset flow rate and a relative enthalpy through the test section at a pressure of 3.3 to 3.4MPa, and measurement of thermal-hydraulic parameters within the circuit's representative upflow and downflow lengths of practical interest. There have been confirmed the designs used to support the reactor facility serviceability and the assumptions concerning the thermal-hydraulic performance of a natural circulation circuit used in the analysis thereof. It has been shown that, across the analyzed range of the relative enthalpy values, the draft tube has an annular-dispersed or an annular flow of the steam-water mixture, both providing for the significant separation of the steam-water mixture (Ksep=0.4 at the draft tube edges and in the mixing chamber. The perforation in the upper part of the draft tubes allows the separation coefficient to be increased at the first stage and creates more favorable conditions for the second-stage separation. The measured values of the void fraction in the mixing chamber and in the draft tube are in a satisfactory agreement with calculations based on Z.L. Miropolskiy's method and the RELAP code and may be used to verify the VK-300 thermal-hydraulic codes. It has been shown that steam may enter the ring slit that simulates the annular space and reach the reactor core inlet. Further investigations need to be conducted to study this effect for its guaranteed exclusion and for the development of emergency response procedures.

  4. Experimental Study of the Effect of Graphite Dispersion on the Heat Transfer Phenomena in a Reactor Cavity Cooling System

    Energy Technology Data Exchange (ETDEWEB)

    Vaghetto, Rodolfo; Capone, Luigi; Hassan, Yassin A

    2011-05-31

    An experimental activity was performed to observe and study the effects of graphite dispersion and deposition on thermal-hydraulic phenomena in a reactor cavity cooling system (RCCS). The small-scale RCCS experimental facility (16.5 x 16.5 x 30.4 cm) used for this activity represents half of the reactor cavity with an electrically heated vessel. Water flowing through five vertical pipes removes the heat produced in the vessel and releases it into the environment by mixing with cold water in a large tank. The particle image velocimetry technique was used to study the velocity field of the air inside the cavity. A set of 52 thermocouples was installed in the facility to monitor the temperature profiles of the vessel, pipe walls, and air. Ten grams of a fine graphite powder (average particle size 2 m) was injected into the cavity through a spraying nozzle placed at the bottom of the vessel. The temperatures and air velocity field were recorded and compared with the measurements obtained before the graphite dispersion, showing a decrease of the temperature surfaces that was related to an increase in their emissivity. The results contribute to the understanding of RCCS capability in an accident scenario.

  5. Uncertainty analysis and flow measurements in an experimental mock-up of a molten salt reactor concept

    Energy Technology Data Exchange (ETDEWEB)

    Yamaji, Bogdan; Aszodi, Attila [Budapest University of Technology and Economics (Hungary). Inst. of Nuclear Techniques

    2016-09-15

    In the paper measurement results from the experimental modelling of a molten salt reactor concept will be presented along with detailed uncertainty analysis of the experimental system. Non-intrusive flow measurements are carried out on the scaled and segmented mock-up of a homogeneous, single region molten salt fast reactor concept. Uncertainty assessment of the particle image velocimetry (PIV) measurement system applied with the scaled and segmented model is presented in detail. The analysis covers the error sources of the measurement system (laser, recording camera, etc.) and the specific conditions (de-warping of measurement planes) originating in the geometry of the investigated domain. Effect of sample size in the ensemble averaged PIV measurements is discussed as well. An additional two-loop-operation mode is also presented and the analysis of the measurement results confirm that without enhancement nominal and other operation conditions will lead to strong unfavourable separation in the core flow. It implies that use of internal flow distribution structures will be necessary for the optimisation of the core coolant flow. Preliminary CFD calculations are presented to help the design of a perforated plate located above the inlet region. The purpose of the perforated plate is to reduce recirculation near the cylindrical wall and enhance the uniformity of the core flow distribution.

  6. Experimental investigation and model validation of a CaO/Ca(OH)2 fluidized bed reactor for thermochemical energy storage applications

    OpenAIRE

    Álvarez Criado, Yolanda; Huille, Alfred; Rougé, Sylvie; Abanades García, Juan Carlos

    2016-01-01

    The CaO/Ca(OH)2 hydration/dehydration chemical loop has long been recognized as a potential candidate for application in energy storage systems for concentrated solar plants. However, the technology still remains at a conceptual level because little information has been published on the performance of the key reactors in the system. In this work, we experimentally investigate the hydration and dehydration reactors in a 5.5 kWth batch fluidized bed reactor, in conditions relevant to larger sys...

  7. Sequential probability ratio tests for reactor signal validation and sensor surveillance applications

    Energy Technology Data Exchange (ETDEWEB)

    Humenik, K. (Maryland Univ., Baltimore, MD (USA)); Gross, K.C. (Argonne National Lab., IL (USA))

    1989-11-09

    This paper examines the properties of sequential probability ratio tests (SPRT's) and the application of these tests to nuclear power reactor operation. Recently SPRT's have been applied to delayed-neutron (DN) signal data analysis using actual reactor data from the Experimental Breeder Reactor-II, which is operated by Argonne National Laboratory. The implementation of this research as part of an expert system is described. Mathematical properties of the SPRT are investigated, and theoretical results are validated with tests that use DN-signal data taken from the EBR-II in Idaho. Variations of the basic SPRT and applications to general signal validation are also explored. 16 refs., 3 figs.

  8. Feasibility Study of a Novel Membrane Reactor for Syngas Production. Part 1: Experimental Study of O2 Permeation through Perovskite Membranes under Reducing and Non-Reducing Atmospheres

    NARCIS (Netherlands)

    Zhang Wenxing, Z.W.; Zhang, Wenxing; Smit, J.; van Sint Annaland, M.; Kuipers, J.A.M.

    2007-01-01

    In this contribution, the feasibility of a novel membrane reactor for energy efficient syngas production is investigated by means of an experimental and a simulation study. In Part 1, a detailed experimental study is performed on the O2 permeation through a perovskite membrane with composition

  9. Selective hydrogenation in trickle-bed reactor. Experimental and modelling including partial wetting.

    OpenAIRE

    Dietz, Adrian; Julcour-Lebigue, Carine; Wilhelm, Anne-Marie; Delmas, Henri

    2003-01-01

    International audience; A steady state model of a trickle bed reactor is developed for the consecutive hydrogenation of 1,5,9-cyclododecatriene on a Pd/Al2O3 catalyst. Various experiments have shown that the selectivity of this reaction towards the product of interest is much lower in co-current down-flow (trickle-bed) than in up-flow. This is due to uneven liquid distribution and to partial wetting of the catalyst surface at low liquid flow rates. The non-isothermal heterogeneous model propo...

  10. Experimental study of the temperature distribution in the TRIGA IPR-R1 Brazilian research reactor; Investigacao experimental da distribuicao de temperaturas no reator nuclear de pesquisa TRIGA IPR-R1

    Energy Technology Data Exchange (ETDEWEB)

    Mesquita, Amir Zacarias

    2005-07-01

    The TRIGA-IPR-R1 Research Nuclear Reactor has completed 44 years in operation in November 2004. Its initial nominal thermal power was 30 kW. In 1979 its power was increased to 100 kW by adding new fuel elements to the reactor. Recently some more fuel elements were added to the core increasing the power to 250 kW. The TRIGA-IPR-R1 is a pool type reactor with a natural circulation core cooling system. Although the large number of experiments had been carried out with this reactor, mainly on neutron activation analysis, there is not many data on its thermal-hydraulics processes, whether experimental or theoretical. So a number of experiments were carried out with the measurement of the temperature inside the fuel element, in the reactor core and along the reactor pool. During these experiments the reactor was set in many different power levels. These experiments are part of the CDTN/CNEN research program, and have the main objective of commissioning the TRIGA-IPR-R1 reactor for routine operation at 250 kW. This work presents the experimental and theoretical analyses to determine the temperature distribution in the reactor. A methodology for the calibration and monitoring the reactor thermal power was also developed. This methodology allowed adding others power measuring channels to the reactor by using thermal processes. The fuel thermal conductivity and the heat transfer coefficient from the cladding to the coolant were also experimentally valued. lt was also presented a correlation for the gap conductance between the fuel and the cladding. The experimental results were compared with theoretical calculations and with data obtained from technical literature. A data acquisition and processing system and a software were developed to help the investigation. This system allows on line monitoring and registration of the main reactor operational parameters. The experiments have given better comprehension of the reactor thermal-fluid dynamics and helped to develop numerical

  11. Experimental Development and Demonstration of Ultrasonic Measurement Diagnostics for Sodium Fast Reactor Thermal-hydraulics

    Energy Technology Data Exchange (ETDEWEB)

    Tokuhiro, Akira; Jones, Byron

    2013-09-13

    This research project will address some of the principal technology issues related to sodium-cooled fast reactors (SFR), primarily the development and demonstration of ultrasonic measurement diagnostics linked to effective thermal convective sensing under normatl and off-normal conditions. Sodium is well-suited as a heat transfer medium for the SFR. However, because it is chemically reactive and optically opaque, it presents engineering accessibility constraints relative to operations and maintenance (O&M) and in-service inspection (ISI) technologies that are currently used for light water reactors. Thus, there are limited sensing options for conducting thermohydraulic measurements under normal conditions and off-normal events (maintenance, unanticipated events). Acoustic methods, primarily ultrasonics, are a key measurement technology with applications in non-destructive testing, component imaging, thermometry, and velocimetry. THis project would have yielded a better quantitative and qualitative understanding of the thermohydraulic condition of solium under varied flow conditions. THe scope of work will evaluate and demonstrate ultrasonic technologies and define instrumentation options for the SFR.

  12. Experimental study of hydrodynamic and operation start of a baffled anaerobic reactor treating sewage

    Directory of Open Access Journals (Sweden)

    Ana Carolina Silveira Perico

    2009-12-01

    Full Text Available It is important to provide individual sanitation systems for sewage peri-urban communities or rural areas to minimize impacts on the environment and human health caused by sewage discharge in natura into water resources. In this context, the anaerobic digestion of effluent has been one of the main considered technologies due to easy implementation, material minimization and reduction in waste production. The objective of this work was to study a Baffled Anaerobic Reactor (BAR including its hydrodynamic characteristics, percentile of inoculum to be applied and reactor operation start. It was concluded that the flow is dispersed with 3.84% of dead spaces and that 20% of the cow manure provided best results; however, due to the high fiber content of the manure, its use is not recommended as inoculum. The BAR system, composed of four chambers, presented good performance for sewage treatment of a rural community in terms of organic substance removal (COD, turbidity and solids meeting effluent disposal standards of these parameters considering the Federal and Minas Gerais State legislation, in Brazil, even in a transient phase of operation, at temperatures below 20°C. However, the effluents from the BAR can’t be released into water bodies without other parameters such as nitrogen, phosphorus, fecal coliforms, and others are investigated to be conforming to those standards.

  13. Theoretical and experimental study of the photocatalytic activity of ZnO coated tubular reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ríos-Valdovinos, E.; Amézaga-Madrid, P.; Antúnez-Flores, W.; Pola-Albores, F.; Pizá-Ruiz, P.; Miki-Yoshida, M., E-mail: mario.miki@cimav.edu.mx

    2014-01-15

    Highlights: • High quality ZnO thin films were deposited on the internal surface of fused silica tubing. • Surface carrier concentration was calculated theoretically under external irradiation. • Influence of film thickness on photocatalytic activity was explained by this model. • An optimum thickness around 60–70 nm was determined to get highest activity. -- Abstract: ZnO thin films were deposited inside of fused silica tubing by aerosol assisted chemical vapor deposition technique. The films were transparent, uniform, highly adherent and non-light scattering. Photocatalytic activity of internally ZnO coated tubing was evaluated by discoloration of a methyl orange aqueous solution in a batch reactor. Tubing was externally irradiated with UV-A at room temperature. A one dimensional model was proposed to calculate the spatial distribution of the carrier density and the films’ surface charge carrier concentration. This model can explain the influence of the films thickness on the photocatalytic activity. Results showed that the photocatalytic activity largely depends on the film thickness. For external irradiation of the films the optimum thickness was around 60–70 nm, for which the photocatalytic activity was maximum. The photonic efficiency of internally ZnO coated tubular reactors was evaluated as a function of initial colorant concentration, irradiation time and intensity. Furthermore, due to the high activity of the ZnO films, the films were repeatedly exposed to UV-A irradiation cycles, followed by activity measurement.

  14. Development of Safety Analysis Codes and Experimental Validation for a Very High Temperature Gas-Cooled Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chang, H. Oh, PhD; Cliff Davis; Richard Moore

    2004-11-01

    The very high temperature gas-cooled reactors (VHTGRs) are those concepts that have average coolant temperatures above 900 degrees C or operational fuel temperatures above 1250 degrees C. These concepts provide the potential for increased energy conversion efficiency and for high-temperature process heat application in addition to power generation and nuclear hydrogen generation. While all the High Temperature Gas Cooled Reactor (HTGR) concepts have sufficiently high temperatures to support process heat applications, such as desalination and cogeneration, the VHTGR's higher temperatures are suitable for particular applications such as thermochemical hydrogen production. However, the high temperature operation can be detrimental to safety following a loss-of-coolant accident (LOCA) initiated by pipe breaks caused by seismic or other events. Following the loss of coolant through the break and coolant depressurization, air from the containment will enter the core by molecular diffusion and ultimately by natural convection, leading to oxidation of the in-core graphite structures and fuel. The oxidation will release heat and accelerate the heatup of the reactor core. Thus, without any effective countermeasures, a pipe break may lead to significant fuel damage and fission product release. The Idaho National Engineering and Environmental Laboratory (INEEL) has investigated this event for the past three years for the HTGR. However, the computer codes used, and in fact none of the world's computer codes, have been sufficiently developed and validated to reliably predict this event. New code development, improvement of the existing codes, and experimental validation are imperative to narrow the uncertaninty in the predictions of this type of accident. The objectives of this Korean/United States collaboration are to develop advanced computational methods for VHTGR safety analysis codes and to validate these computer codes.

  15. Large-scale experimental facility for emergency condition investigation of a new generation NPP WWER-640 reactor with passive safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Aniskevich, Y.N.; Vasilenko, V.A.; Zasukha, V.K.; Migrov, Y.A.; Khabensky, V.B. [Research Inst. of Technology NITI (Russian Federation)

    1997-12-31

    The creation of the large-scale integral experimental facility (KMS) is specified by the programme of the experimental investigations to justify the engineering decisions on the safety of the design of the new generation NPP with the reactor WWER-640. The construction of KMS in a full volume will allow to conduct experimental investigations of all physical phenomena and processes, practically, occurring during the accidents on the NPPs with the reactor of WWER type and including the heat - mass exchange processes with low rates of the coolant, which is typical during the utilization of the passive safety systems, process during the accidents with a large leak, and also the complex intercommunicated processes in the reactor unit, passive safety systems and in the containment with the condition of long-term heat removal to the final absorber. KMS is being constructed at the Research Institute of Technology (NITI), Sosnovy Bor, Leningrad region, Russia. (orig.). 5 refs.

  16. Studying the capture cross sections of constructional elements from measurements of the neutron balance in breeder media

    Energy Technology Data Exchange (ETDEWEB)

    Golubev, V.I.; Dulin, V.A.; Kazanskii, Yu.A.; Darrouzet, M.; Martin-Deidier, L.; Rimpault, G.

    1987-04-01

    Until recently, the indeterminacy in the group capture cross sections of constructional elements at neutron energies above 1 keV were estimated at 15-20%, leading to an error of 0.2 and 1%, respectively, in calculating K/sub ef/ and the conversion factor of breeder reactors with oxide fuel and sodium coolant. In fact, calculations using the BNAB-78 group constants used in the USSR for the design development of fast reactors show that the mean neutron capture cross section of constructional elements (iron, nickel, and chromium) is approx. 1.4 times greater for a typical breeder reactor than in the case of calculation by the version of Carnaval IV used in France for the Superphoenix reactors. To refine the proportion of neutrons absorbed in stainless steel, the neutron balance in media consisting of uranium fuel and stainless steel with nickel in a proportion ensuring a near-unity breeder coefficient of infinite media of this composition (K/sub infinity/ = 1) has been measured at the Power-Physics Institute in Obninsk and at the Center for Nuclear Research in Caradache. The results obtained allow the accuracy of calculating the proportion of neutrons absorbed in constructional elements to be judged

  17. Behavior of actinides in the Integral Fast Reactor fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Courtney, J.C. [Louisiana State Univ., Baton Rouge, LA (United States). Nuclear Science Center; Lineberry, M.J. [Argonne National Lab., Idaho Falls, ID (United States). Technology Development Div.

    1994-06-01

    The Integral Fast Reactor (IFR) under development by Argonne National Laboratory uses metallic fuels instead of ceramics. This allows electrorefining of spent fuels and presents opportunities for recycling minor actinide elements. Four minor actinides ({sup 237}Np, {sup 240}Pu, {sup 241}Am, and {sup 243}Am) determine the waste storage requirements of spent fuel from all types of fission reactors. These nuclides behave the same as uranium and other plutonium isotopes in electrorefining, so they can be recycled back to the reactor without elaborate chemical processing. An experiment has been designed to demonstrate the effectiveness of the high-energy neutron spectra of the IFR in consuming these four nuclides and plutonium. Eighteen sets of seven actinide and five light metal targets have been selected for ten day exposure in the Experimental Breeder Reactor-2 which serves as a prototype of the IFR. Post-irradiation analyses of the exposed targets by gamma, alpha, and mass spectroscopy are used to determine nuclear reaction-rates and neutron spectra. These experimental data increase the authors` confidence in their ability to predict reaction rates in candidate IFR designs using a variety of neutron transport and diffusion programs.

  18. FOWL CHOLERA IN A BREEDER FLOCK

    Directory of Open Access Journals (Sweden)

    Z. Parveen, A. A. Nasir, K.Tasneem and A. Shah

    2003-12-01

    Full Text Available During January, 2003 Pasteurella multocida the causative agent of fowl cholera was isolated from a breeder flock in Lahore District. The age of the flock was 245 days. Increased mortality, swollen wattles and lameness were the clinical findings present in almost all the affected birds, while gross lesions were typical of fowl cholera. To prove the virulence of the organism, mice and six-week old cockerals were infected and P. multocida was reisolated.

  19. Experimental assessment of accident scenarios for the high temperature reactor fuel system

    Energy Technology Data Exchange (ETDEWEB)

    Seeger, O.; Laurie, M.; Bottomley, P.D.W.; Rondinella, V.V. [European Commission, Joint Research Center, Karlsruhe (Germany). Inst. for Transuranium Elements; Avincola, V. [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany). Inst. fuer Angewandte Materialien (IAM-AWP); Allelein, H.J. [RWTH Aachen Univ. (Germany). Lehrstuhl fuer Reaktorsicherheit und -technik

    2013-11-15

    The High Temperature Reactor (HTR) is characterized by an advanced design with passive safety features. Fuel elements are constituted by a graphite matrix containing sub-mm-sized fuel particles with TRi-ISOtropic (TRISO) coating, designed to provide high fission product retention. During a loss of coolant accident scenario in a HTR the maximum temperature is foreseen to be in the range of 1,600 to 1,650 C, remaining well below the melting point of the fuel. Two key aspects associated with the safety of HTR fuel are assessed in this paper: fission product retention at temperatures up to 1,800 C is analyzed with the Cold Finger Apparatus (KueFA) while the behaviour of HTR-relevant fuel materials in an oxidizing environment is studied with the Corrosion Apparatus KORA. The KueFA is used to observe the combined effects of Depressurization and LOss of Forced Circulation (DLOFC) accident scenarios on HTR fuel. Originally designed at the Forschungszentrum Juelich (FZJ), an adapted KueFA operates on irradiated fuel in hot cell at JRC-ITU. A fuel pebble is heated in helium atmosphere for several hundred hours, mimicking accident temperatures up to 1,800 C and realistic temperature transients. Nongaseous volatile fission products released from the fuel condense on a water cooled stainless steel plate dubbed 'Cold Finger'. Exchanging plates frequently during the experiment and analyzing plate deposits by means of High Purity Germanium (HPGe) gamma spectroscopy allows a reconstruction of the fission product release as a function of time and temperature. To achieve a good quantification of the release, a careful calibration of the setup is necessary and a collimator needs to be used in some cases. The analysis of condensation plates from recent KueFA tests shows that fission product release quantification is possible at high and low activity levels. Another relevant HTR accident scenario is air ingress into the reactor vessel as a consequence of a DLOFC incident. In

  20. Experimental investigation of the solar carbothermic reduction of ZnO using a two-cavity solar reactor

    Energy Technology Data Exchange (ETDEWEB)

    Frommherz, U.; Osinga, T.; Steinfeld, A.; Wieckert, C.

    2003-03-01

    Zinc production by solar carbothermic reduction of ZnO offers a CO{sub 2} emission reduction by a factor of 5 vis-a-vis the conventional fossil-fuel-based electrolytic or Imperial Smelting processes. Zinc can serve as a fuel in Zn-air fuel cells or can be further reacted with H{sub 2}O to form high-purity H{sub 2}. In either case, the product ZnO can be solar-recycled to Zn. We report on experimental results obtained with a 5 kW solar chemical reactor prototype that features two cavities in series, with the inner one functioning as the solar absorber and the outer one as the reaction chamber. Tests were conducted at PSI's Solar Furnace and ETH's High-Flux Solar Simulator to investigate the effect of process temperature (range 1350-1600 K) and reducing agent type (beech charcoal, activated charcoal, petcoke) on the reactor's performance and on the chemical conversion. In a typical 40-min solar experiment at 1500 K, 500 g of a 1:0.8 stoichiometric ZnO-C mixture were processed into Zn(g), CO, and CO{sub 2}. Thermal efficiencies of up to 20% were achieved. (author)

  1. Experimental Design for Evaluating Selected Nondestructive Measurement Technologies - Advanced Reactor Technology Milestone: M3AT-16PN2301043

    Energy Technology Data Exchange (ETDEWEB)

    Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, Evelyn H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pitman, Stan G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dib, Gerges [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Roy, Surajit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Good, Morris S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walker, Cody M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-07-16

    The harsh environments in advanced reactors (AdvRx) increase the possibility of degradation of safety-critical passive components, and therefore pose a particular challenge for deployment and extended operation of these concepts. Nondestructive evaluation technologies are an essential element for obtaining information on passive component condition in AdvRx, with the development of sensor technologies for nondestructively inspecting AdvRx passive components identified as a key need. Given the challenges posed by AdvRx environments and the potential needs for reducing the burden posed by periodic in-service inspection of hard-to-access and hard-to-replace components, a viable solution may be provided by online condition monitoring of components. This report identifies the key challenges that will need to be overcome for sensor development in this context, and documents an experimental plan for sensor development, test, and evaluation. The focus of initial research and development is on sodium fast reactors, with the eventual goal of the research being developing the necessary sensor technology, quantifying sensor survivability and long-term measurement reliability for nondestructively inspecting critical components. Materials for sensor development that are likely to withstand the harsh environments are described, along with a status on the fabrication of reference specimens, and the planned approach for design and evaluation of the sensor and measurement technology.

  2. Combined numerical and experimental investigation into the coolant flow hydrodynamics and mass transfer behind the spacer grid in fuel assemblies of the floating power unit reactor

    Directory of Open Access Journals (Sweden)

    S.M. Dmitriev

    2015-09-01

    Full Text Available The results of experimental investigations into the local hydrodynamics and inter-cell mass transfer of the coolant flow in representative zones of the KLT-40C reactor FAs behind the plate-type spacer grid are presented. The investigations were conducted on an aerodynamic rig using the admixture diffusion method (the tracer-gas method. A study into the spatial dispersion of the absolute flow velocity projections and into the distribution of the tracer concentration allowed specify the coolant flow pattern behind the FA plate-type spacer grid of the KLT-40C reactor. The results of measuring the flow friction coefficient in the plate-type spacer grid, depending on the Reynolds number, are presented. Based on the obtained experimental data, recommendations have been provided for updating the procedures to calculate the coolant flow rates for the KLT-40C reactor core by-channel codes. The results of investigating the coolant flow local hydrodynamics and mass transfer in the KLT-40C reactor FAs have been adopted for practical use by Afrikantov OKBM for estimating the heat-engineering reliability of the KLT-40C reactor cores and have been data based for verification of CFD codes and detailed by-channel calculation of the KLT-40C reactor core.

  3. What determines hatchling weight: breeder age or incubated egg weight?

    Directory of Open Access Journals (Sweden)

    AB Traldi

    2011-12-01

    Full Text Available Two experiments were carried out to determine which factor influences weight at hatch of broiler chicks: breeder age or incubated egg weight. In Experiment 1, 2340 eggs produced by 29- and 55-week-old Ross® broiler breeders were incubated. The eggs selected for incubation weighed one standard deviation below and above average egg weight. In Experiment 2, 2160 eggs weighing 62 g produced by breeders of both ages were incubated. In both experiments, 50 additional eggs within the weight interval determined for each breeder age were weighed, broken, and their components were separated and weighed. At hatch, hatchlings were sexed and weighed, determining the average initial weight of the progeny of each breeder age. Data were analyzed using the Analyst program of SAS® software package. In Experiment 1, the weight difference between eggs produced by young and mature breeders was 10.92 g, and the component that mostly influenced this difference was the yolk (7.51 g heavier in mature breeders, compared with 4.23 g difference in albumen and 0.8 g in eggshell weights. Hatchling weight difference was 9.4 g higher in eggs from mature breeders. In Experiment 2, egg weight difference was only 0.74 g, but yolk weight was 4.59 g higher in the eggs of mature breeders. The results obtained in the present study indicate that hatchling weight is influenced by egg weight, and not by breeder age.

  4. The effects of a reduced balanced protein diet on litter moisture, pododermatitis and feather condition of female broiler breeders over three generations.

    Science.gov (United States)

    Li, C; Lesuisse, J; Schallier, S; Clímaco, W; Wang, Y; Bautil, A; Everaert, N; Buyse, J

    2017-11-02

    Protein content reduction in broiler breeder diets has been increasingly investigated. However, broiler breeders reared on low protein diets are characterized by a deterioration of the feather condition. Furthermore, polydipsia induced by controlled feed intake increases litter moisture and as a consequence pododermatitis. This project aimed to study the litter moisture, pododermatitis and feather condition of breeders fed with a 25% reduced balanced protein (RP) diet during the rearing and laying period over three successive generations. The experiment started with two treatments for the F0 generation: control (C) group fed with standard C diets and RP group fed with RP diets. The female F0-progeny of each treatment was divided into the two dietary treatments as well, resulting in four treatments for the F1 generation: C/C, C/RP, RP/C and RP/RP (breeder feed in F0/F1 generation). The RP diet fed breeders received on average 10% more feed than C diet fed breeders to achieve the same target BW. The female F1-progeny of each treatment were all fed with C diets which resulted in four treatments for the F2 generation: C/C/C, C/RP/C, RP/C/C and RP/RP/C (breeder feed in F0/F1/F2 generation). Litter moisture, footpad and hock dermatitis were recorded at regular intervals throughout the experimental period in all three generations. For the F0 and F1 generation, the pens of breeders receiving C diets had significantly higher litter moisture than the RP diets fed groups (P<0.05), resulting in an elevated footpad dermatitis occurrence (FDO) (P<0.05). No difference was found in the F2 generation. The feather condition was scored during the laying period for each generation. F0 and F1 breeders reared on the RP diets had poorer feather condition than those receiving the C diets (P<0.05). The C/RP breeders had a significantly poorer feather condition than RP/RP breeders (P<0.05). For the F2 generation, RP/RP/C breeders had a significantly better feather condition compared with

  5. Monitoring of dry anaerobic fermentation in experimental facility with use of biofilm reactor

    Directory of Open Access Journals (Sweden)

    Milan Šinkora

    2011-01-01

    -called biofilm reactor. An external reactor with a cultivated bacterial biofilm on an immovable carrier with the percolate flowing through it has been constructed in laboratory conditions for this purpose. The choice of suitable percolate strategy (this means the frequency of sprinkling and the amount of percolate directly influences the process of anaerobic fermentation.

  6. Experimental Investigations of Physical and Chemical Properties for Microalgae HTL Bio-Crude Using a Large Batch Reactor

    Directory of Open Access Journals (Sweden)

    Farhad M. Hossain

    2017-04-01

    Full Text Available As a biofuel feedstock, microalgae has good scalability and potential to supply a significant proportion of world energy compared to most types of biofuel feedstock. Hydrothermal liquefaction (HTL is well-suited to wet biomass (such as microalgae as it greatly reduces the energy requirements associated with dewatering and drying. This article presents experimental analyses of chemical and physical properties of bio-crude oil produced via HTL using a high growth-rate microalga Scenedesmus sp. in a large batch reactor. The overarching goal was to investigate the suitability of microalgae HTL bio-crude produced in a large batch reactor for direct application in marine diesel engines. To this end we characterized the chemical and physical properties of the bio-crudes produced. HTL literature mostly reports work using very small batch reactors which are preferred by researchers, so there are few experimental and parametric measurements for bio-crude physical properties, such as viscosity and density. In the course of this study, a difference between traditionally calculated values and measured values was noted. In the parametric study, the bio-crude viscosity was significantly closer to regular diesel and biodiesel standards than transesterified (FAME microalgae biodiesel. Under optimised conditions, HTL bio-crude’s high density (0.97–1.04 kg·L−1 and its high viscosity (70.77–73.89 mm2·s−1 had enough similarity to marine heavy fuels. although the measured higher heating value, HHV, was lower (29.8 MJ·kg−1. The reaction temperature was explored in the range 280–350 °C and bio-crude oil yield and HHV reached their maxima at the highest temperature. Slurry concentration was explored between 15% and 30% at this temperature and the best HHV, O:C, and N:C were found to occur at 25%. Two solvents (dichloromethane and n-hexane were used to recover the bio-crude oil, affecting the yield and chemical composition of the bio-crude.

  7. Experimental investigation of pebble flow dynamics using radioactive particle tracking technique in a scaled-down Pebble Bed Modular Reactor (PBMR)

    Energy Technology Data Exchange (ETDEWEB)

    Khane, Vaibhav; Said, I.A.; Al-Dahhan, Muthanna H., E-mail: aldahhanm@mst.edu

    2016-06-15

    Highlights: • Pebble Flow fields at Pebble Bed Modular Reactor was investigated. • Radioactive Particle Tracking (RPT) technique has been used. • Plug flow type velocity profile is suggested at upper cylindrical region. - Abstract: The Pebble Bed Modular Reactor (PBMR) is a type of very-high-temperature reactor (VHTR) that is conceptually very similar to moving bed reactors used in the chemical and petrochemical industries. In a PBMR core, nuclear fuel is in the form of pebbles and moves slowly under the influence of gravity. In this work, an integrated experimental and computational study of granular flow in a scaled-down cold flow PBMR was performed. A continuous pebble re-circulation experimental set-up, mimicking the flow of pebbles in a PBMR was designed and developed. An experimental investigation of pebble flow dynamics in a scaled down test reactor was carried out using a non-invasive radioactive particle tracking (RPT) technique that used a cobalt-60 based tracer to mimic pebbles in terms of shape, size and density. A cross-correlation based position reconstruction algorithm and RPT calibration data were used to obtain results about Lagrangian trajectories, the velocity field, and residence time distributions. The RPT technique results a serve as a benchmark data for assessing contact force models used in the discrete element method (DEM) simulations.

  8. Numerical and experimental investigation of surface vortex formation in coolant reservoirs of reactor safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Pandazis, Peter [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany); Babcsany, Boglarka [Budapest Univ. of Technology and Economics (Hungary). Inst. of Nuclear Techniques

    2016-11-15

    The reliable operation of the emergency coolant pumps and passive gravitational injection systems are an important safety issue during accident scenarios with coolant loss in pressurized water reactors. Because of the pressure drop and flow disturbances surface vortices develops at the pump intakes if the water level decreasing below a critical value. The induced swirling flow and gas entrainment lead to flow limitation and to pump failures and damages. The prediction of the critical submergence to avoid surface vortex building is difficult because it depends on many geometrical and fluid dynamical parameters. An alternative and new method has been developed for the investigation of surface vortices. The method based on the combination of CFD results with the analytical vortex model of Burgers and Rott. For further investigation the small scale experiments from the Institute of Nuclear Techniques of the Budapest University of Technology and Economics are used which were inspired from flow limitation problems during the draining of the bubble condenser trays at a VVER type nuclear power plants.

  9. The thermal decomposition of the benzyl radical in a heated micro-reactor. I. Experimental findings

    Science.gov (United States)

    Buckingham, Grant T.; Ormond, Thomas K.; Porterfield, Jessica P.; Hemberger, Patrick; Kostko, Oleg; Ahmed, Musahid; Robichaud, David J.; Nimlos, Mark R.; Daily, John W.; Ellison, G. Barney

    2015-01-01

    The pyrolysis of the benzyl radical has been studied in a set of heated micro-reactors. A combination of photoionization mass spectrometry (PIMS) and matrix isolation infrared (IR) spectroscopy has been used to identify the decomposition products. Both benzyl bromide and ethyl benzene have been used as precursors of the parent species, C6H5CH2, as well as a set of isotopically labeled radicals: C6H5CD2, C6D5CH2, and C6H513CH2. The combination of PIMS and IR spectroscopy has been used to identify the earliest pyrolysis products from benzyl radical as: C5H4=C=CH2, H atom, C5H4—C ≡ CH, C5H5, HCCCH2, and HC ≡ CH. Pyrolysis of the C6H5CD2, C6D5CH2, and C6H513CH2 benzyl radicals produces a set of methyl radicals, cyclopentadienyl radicals, and benzynes that are not predicted by a fulvenallene pathway. Explicit PIMS searches for the cycloheptatrienyl radical were unsuccessful, there is no evidence for the isomerization of benzyl and cycloheptatrienyl radicals: C6H5CH2⇋C7H7. These labeling studies suggest that there must be other thermal decomposition routes for the C6H5CH2 radical that differ from the fulvenallene pathway.

  10. Calibration of a fuel-to-cladding gap conductance model for fast reactor fuel pins

    Energy Technology Data Exchange (ETDEWEB)

    Baker, R.B.

    1978-05-01

    The report presents refined methods for calculation of fuel temperatures in PuO/sub 2/-UO/sub 2/ fuel in Fast Breeder Reactor (FBR) fuel pins. Of primary concern is the calculation of the temperature changes across the fuel-to-cladding gap of pins with fuel burnups that range from 60 to 10,900 MWd/MTM (0.006 to 1.12 at.%). Described in particular are: (1) a proposed set of heat transfer formulations and corresponding material properties for modeling radial heat transfer through the fuel and cladding; and (2) the calibration of a fuel-to-cladding gap conductance model, as part of a thermal performance computer code (SIEX-M1) which incorporates the proposed heat transfer expressions, using integral thermal performance data from two unique in-reactor experiments. The test data used are from the HEDL P-19 and P-20 experiments which were irradiated in the Experimental Breeder Reactor Number Two (EBR-II), for the Hanford Engineering Development Laboratory (HEDL).

  11. Isotope exchange reactions on ceramic breeder materials and their effect on tritium inventory

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, M.; Baba, A. [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering; Kawamura, Y.; Nishi, M.

    1998-03-01

    Though lithium ceramic materials such as Li{sub 2}O, LiAlO{sub 2}, Li{sub 2}ZrO{sub 3}, Li{sub 2}TiO{sub 3} and Li{sub 4}SiO{sub 4} are considered as breeding materials in the blanket of a D-T fusion reactor, the release behavior of the bred tritium in these solid breeder materials has not been fully understood. The isotope exchange reaction rate between hydrogen isotopes in the purge gas and tritium on the surface of breeding materials have not been quantified yet, although helium gas with hydrogen or deuterium is planned to be used as the blanket purge gas in the recent blanket designs. The mass transfer coefficient representing the isotope exchange reaction between H{sub 2} and D{sub 2}O or that between D{sub 2} and H{sub 2}O in the ceramic breeding materials bed is experimentally obtained in this study. Effects of isotope exchange reactions on the tritium inventory in the bleeding blanket is discussed based on data obtained in this study where effects of diffusion of tritium in the grain, absorption of water in the bulk of grain, and adsorption of water on the surface of grain, together with two types of isotope exchange reactions are considered. The way to estimate the tritium inventory in a Li{sub 2}ZrO{sub 3} blanket used in this study shows a good agreement with data obtained in such in-situ experiments as MOZART, EXOTIC-5, 6 and TRINE experiments. (author)

  12. The role of clusters in gas-solids reactors. An experimental study.

    NARCIS (Netherlands)

    Venderbosch, R.H.

    1998-01-01

    This PhD-work is meant to determine the contact efficiency experimentally for fluidization of fine particles over a wide range of superficial gas velocities (dp<200 mm and 0.1

  13. 14MeV neutron irradiation experiment on window materials for fusion experimental reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Fuminobu; Oyama, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Iida, Toshiyuki

    1997-06-01

    Data on wavelength spectra of photons emitted from window material during neutron and gamma-ray irradiation has been required for design of next D-T burning fusion reactor such as ITER. Thus, a photon measurement system has been developed to analyze wavelength spectra of photons emitted from the optical window materials during 14MeV-neutron irradiation, and the system consisted of a sample holder, a radiation-resistant optical fiber, a photon counting analyzer and other electronic devices. The irradiation experiments for synthesized sapphire, high-purity silica glass and synthesized quartz were performed using a fusion neutron source FNS. As for all the sample, number of photon emission was proportional to the 14MeV-neutron flux in the range of 10{sup 6}-10{sup 11}n/cm{sup 2}/sec. The photon emission efficiency of F-center luminescence of the sapphire was 2200 {+-} 700photons/MeV, while the efficiency of F{sup +}-center luminescence was two order less than that of F-center. The wavelength spectra of the high-purity silica glass had a large peak around 450nm, which was concerned with decay of self-trapped excitons in oxygen vacancies. Its photon emission efficiency for 14MeV-neutrons has been found to be about 5 {+-} 3photons/MeV in visible range, while that for gamma-rays to be about 135 {+-} 50photons/MeV. The spectrum of photons emitted from the quartz had two large peaks around not only 450nm but also 650nm, and the photon emission efficiency in the wavelength range of 350-750nm was 14 {+-} 4photons/MeV. (author)

  14. The thermal decomposition of the benzyl radical in a heated micro-reactor. I. Experimental findings

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, Grant T.; Ormond, Thomas K. [Department of Chemistry and Biochemistry, University of Colorado, Boulder, Colorado 80309-0215 (United States); National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, Colorado 80401 (United States); Porterfield, Jessica P.; Ellison, G. Barney [Department of Chemistry and Biochemistry, University of Colorado, Boulder, Colorado 80309-0215 (United States); Hemberger, Patrick [Molecular Dynamics Group, Paul Scherrer Institut, CH-5232 Villigen-PSI (Switzerland); Kostko, Oleg; Ahmed, Musahid [Chemical Sciences Division, Lawrence Berkeley National Laboratories, Berkeley, California 94720 (United States); Robichaud, David J.; Nimlos, Mark R. [National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, Colorado 80401 (United States); Daily, John W. [Department of Mechanical Engineering, Center for Combustion and Environmental Research,University of Colorado, Boulder, Colorado 80309-0427 (United States)

    2015-01-28

    The pyrolysis of the benzyl radical has been studied in a set of heated micro-reactors. A combination of photoionization mass spectrometry (PIMS) and matrix isolation infrared (IR) spectroscopy has been used to identify the decomposition products. Both benzyl bromide and ethyl benzene have been used as precursors of the parent species, C{sub 6}H{sub 5}CH{sub 2}, as well as a set of isotopically labeled radicals: C{sub 6}H{sub 5}CD{sub 2}, C{sub 6}D{sub 5}CH{sub 2}, and C{sub 6}H{sub 5}{sup 13}CH{sub 2}. The combination of PIMS and IR spectroscopy has been used to identify the earliest pyrolysis products from benzyl radical as: C{sub 5}H{sub 4}=C=CH{sub 2}, H atom, C{sub 5}H{sub 4}—C ≡ CH, C{sub 5}H{sub 5}, HCCCH{sub 2}, and HC ≡ CH. Pyrolysis of the C{sub 6}H{sub 5}CD{sub 2}, C{sub 6}D{sub 5}CH{sub 2}, and C{sub 6}H{sub 5}{sup 13}CH{sub 2} benzyl radicals produces a set of methyl radicals, cyclopentadienyl radicals, and benzynes that are not predicted by a fulvenallene pathway. Explicit PIMS searches for the cycloheptatrienyl radical were unsuccessful, there is no evidence for the isomerization of benzyl and cycloheptatrienyl radicals: C{sub 6}H{sub 5}CH{sub 2}⇋C{sub 7}H{sub 7}. These labeling studies suggest that there must be other thermal decomposition routes for the C{sub 6}H{sub 5}CH{sub 2} radical that differ from the fulvenallene pathway.

  15. Three-phase packed bed reactor with an evaporating solvent—I. Experimental: the hydrogenation of 2,4,6-trinitrotoluene in methanol

    NARCIS (Netherlands)

    van Gelder, K.B.; Damhof, J.K.; Kroijenga, P.J.; Westerterp, K.R.

    1990-01-01

    In this paper we present experimental data on the three-phase hydrogenation of 2,4,6-trinitrotoluene (TNT) to triaminotoluene. The experiments are performed in a cocurrent upflow packed bed reactor. Methanol is used as an evaporating solvent. The influence of the main operating parameters, the

  16. A scaled experimental study of control blade insertion dynamics in Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Buster, Grant C., E-mail: grant.buster@gmail.com; Laufer, Michael R.; Peterson, Per F.

    2016-07-15

    Highlights: • A granular dynamics scaling methodology is discussed. • Control blade insertion in a representative pebble-bed core is experimentally studied. • Control blade insertion forces and pebble displacements are experimentally measured. • X-ray tomography techniques are used to observe pebble displacement distributions. - Abstract: Direct control element insertion into a pebble-bed reactor core is proposed as a viable control system in molten-salt-cooled pebble-bed reactors. Unlike helium-cooled pebble-bed reactors, this reactor type uses spherical fuel elements with near-neutral buoyancy in the molten-salt coolant, thus reducing contact forces on the fuel elements. This study uses the X-ray Pebble Bed Recirculation Experiment facility to measure the force required to insert a control element directly into a scaled pebble-bed. The required control element insertion force, and therefore the contact force on fuel elements, is measured to be well below recommended limits. Additionally, X-ray tomography is used to observe how the direct insertion of a control element physically displaces spherical fuel elements. The tomography results further support the viability of direct control element insertion into molten-salt-cooled pebble-bed reactor cores.

  17. An Experimental Investigation of Sewage Sludge Gasification in a Fluidized Bed Reactor

    Science.gov (United States)

    Calvo, L. F.; García, A. I.; Otero, M.

    2013-01-01

    The gasification of sewage sludge was carried out in a simple atmospheric fluidized bed gasifier. Flow and fuel feed rate were adjusted for experimentally obtaining an air mass : fuel mass ratio (A/F) of 0.2 gasification. This allowed improving the process heat transfer and, therefore, gasification efficiency. The heating value of the produced gas was 8.4 MJ/Nm, attaining a hot gas efficiency of 70% and a cold gas efficiency of 57%. PMID:24453863

  18. [Reoccurrence of histomonosis in turkey breeder farm].

    Science.gov (United States)

    Aka, Johannes; Hauck, Rüdiger; Blankenstein, Petra; Balczulat, Stefanie; Hafez, Hafez Mohamed

    2011-01-01

    Histomonosis is a severe disease caused by the protozoan parasite Histomonas (H.) meleagridis, which can lead to high losses in turkeys. The present report describes the reoccurrence of histomonosis in a turkey breeder farm. The first outbreak occurred in 2005 in 17 weeks old hens, the second in 2009 in 8 weeks old hens. The disease remained restricted in one house and one compartment, respectively. Mortality rose to 26 and 65% respectively within few days in spite of therapy with various compounds. Both flocks had to be euthanized. In both cases H. meleagridis belonging to genotype A was detected. The source of infection remained unclear in both cases.

  19. Summary of the 3rd workshop on the reduced-moderation water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi [eds.

    2000-06-01

    The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

  20. An analytical and experimental investigation of natural circulation transients in a model pressurized water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Massoud, M

    1987-01-01

    Natural Circulation phenomena in a simulated PWR was investigated experimentally and analytically. The experimental investigation included determination of system characteristics as well as system response to the imposed transient under symmetric and asymmetric operations. System characteristics were used to obtain correlation for heat transfer coefficient in heat exchangers, system flow resistance, and system buoyancy heat. Asymmetric transients were imposed to study flow oscillation and possible instability. The analytical investigation encompassed development of mathematical model for single-phase, steady-state and transient natural circulation as well as modification of existing model for two-phase flow analysis of phenomena such as small break LOCA, high pressure coolant injection and pump coast down. The developed mathematical model for single-phase analysis was computer coded to simulate the imposed transients. The computer program, entitled ''Symmetric and Asymmetric Analysis of Single-Phase Flow (SAS),'' were employed to simulate the imposed transients. It closely emulated the system behavior throughout the transient and subsequent steady-state. Modifications for two-phase flow analysis included addition of models for once-through steam generator and electric heater rods. Both programs are faster than real time. Off-line, they can be used for prediction and training applications while on-line they serve for simulation and signal validation. The programs can also be used to determine the sensitivity of natural circulation behavior to variation of inputs such as secondary distribution and power transients.

  1. Industrial solar breeder project using concentrator photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, R; Wohlgemuth, J; Burkholder, J; Levine, A; Storti, G; Wrigley, C; McKegg, A

    1979-08-01

    The purpose of this program is to demonstrate the use of a concentrating photovoltaic system to provide the energy for operating a silicon solar cell production facility, i.e., to demonstrate a solar breeder. Solarex has proposed to conduct the first real test of the solar breeder concept by building and operating a 200 kW(e) (peak) concentrating photovoltaic system based on the prototype and system design developed during Phase I. This system will provide all of the electrical and thermal energy required to operate a solar cell production line. This demonstration would be conducted at the Solarex Rockville facility, with the photovoltaic array located over the company parking lot and on an otherwise unusable flood plain. Phase I of this program included a comprehensive analysis of the application, prototype fabrication and evaluation, system design and specification, and a detailed plan for Phases II and III. A number of prototype tracking concentrator solar collectors were constructed and operated. Extensive system analysis was performed to design the Phase II system as a stand-alone power supply for a solar cell production line. Finally, a detailed system fabrication proposal for Phase II and an operation and evaluation plan for Phase III were completed. These proposals included technical, management, and cost plans for the fabrication and exercise of the proposed system.

  2. Radiation Damage in Nuclear Fuel for Advanced Burner Reactors: Modeling and Experimental Validation

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Niels Gronbech; Asta, Mark; Ozolins, Nigel Browning' Vidvuds; de Walle, Axel van; Wolverton, Christopher

    2011-12-29

    The consortium has completed its existence and we are here highlighting work and accomplishments. As outlined in the proposal, the objective of the work was to advance the theoretical understanding of advanced nuclear fuel materials (oxides) toward a comprehensive modeling strategy that incorporates the different relevant scales involved in radiation damage in oxide fuels. Approaching this we set out to investigate and develop a set of directions: 1) Fission fragment and ion trajectory studies through advanced molecular dynamics methods that allow for statistical multi-scale simulations. This work also includes an investigation of appropriate interatomic force fields useful for the energetic multi-scale phenomena of high energy collisions; 2) Studies of defect and gas bubble formation through electronic structure and Monte Carlo simulations; and 3) an experimental component for the characterization of materials such that comparisons can be obtained between theory and experiment.

  3. Analysis of radiological accident emissions of a lead-cooled experimental reactor. LEADER Project; Analisis radiologico de las emisiones en caso de accidente de un reactor experimental refrigerado por plomo. Proyecto LEADER

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Salcedo, F.; Cortes Martin, A.

    2013-07-01

    The LEADER project develops a conceptual level industrial size reactor cooled lead and a demonstration plant of this technology. The project objectives are to define the characteristics and design to installation scale reactor using available technologies and short-term components and assess safety aspects conducting a preliminary analysis of the impact of the facility.

  4. Induction of eggshell apex abnormalities in broiler breeder hens.

    Science.gov (United States)

    Feberwee, A; Landman, W J M

    2010-04-01

    Recently, the causal relationship between eggshell apex abnormalities (EAA) and Mycoplasma synoviae was described. This eggshell pathology has only been documented in table egg layers both spontaneously and experimentally infected with M. synoviae, suggesting that meat-type layers are less prone to this condition. In this study the susceptibility of specified pathogen free (SPF) broiler breeder hens to produce eggs with EAA after M. synoviae infection was assessed. Five groups of 12 hens each were made: a negative control group, a group inoculated intratracheally (i.t.) with a M. synoviae EAA strain at 19 weeks of age, a group inoculated i.t. with this strain at 19 and 26 weeks of age, a group inoculated with M. synoviae i.t. at 19 weeks of age and infected 5 days earlier with infectious bronchitis virus D1466 (IBV), and a fifth group similar to the former but inoculated i.t. twice with an M. synoviae EAA strain at 19 and 26 weeks of age. Eggs with EAA were only produced after a single i.t. inoculation with the M. synoviae EAA strain if preceded by an infection with IBV. The production of eggs with EAA started 6 weeks after M. synoviae EAA inoculation and the proportion of eggs with EAA during the experiment was 9/449 (2%), which was much lower than that in SPF layer hens (14-22%). The present results suggest that broiler breeder hens are less susceptible to producing eggs with EAA after an infection with a M. synoviae EAA strain preceded by an IBV infection, compared with table egg layers. Similar to SPF egg layers, the mean daily egg production per hen was significantly reduced by the M. synoviae EAA strain and there was a general negative effect on eggshell strength by this strain, suggesting it could also have a detrimental effect on hatching egg quality.

  5. Guideline for Performing Systematic Approach to Evaluate and Qualify Legacy Documents that Support Advanced Reactor Technology Activity

    Energy Technology Data Exchange (ETDEWEB)

    Honma, George [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-10-01

    The establishment of a systematic process for the evaluation of historic technology information for use in advanced reactor licensing is described. Efforts are underway to recover and preserve Experimental Breeder Reactor II and Fast Flux Test Facility historical data. These efforts have generally emphasized preserving information from data-acquisition systems and hard-copy reports and entering it into modern electronic formats suitable for data retrieval and examination. The guidance contained in this document has been developed to facilitate consistent and systematic evaluation processes relating to quality attributes of historic technical information (with focus on sodium-cooled fast reactor (SFR) technology) that will be used to eventually support licensing of advanced reactor designs. The historical information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The evaluation process is prescribed in terms of SFR technology, but the process can be used to evaluate historical information for any type of advanced reactor technology. An appendix provides a discussion of typical issues that should be considered when evaluating and qualifying historical information for advanced reactor technology fuel and source terms, based on current light water reactor (LWR) requirements and recent experience gained from Next Generation Nuclear Plant (NGNP).

  6. Evaluation of the efficacy of an autogenous Escherichia coli vaccine in broiler breeders

    DEFF Research Database (Denmark)

    Li, Lili; Thøfner, Ida; Christensen, Jens Peter

    2017-01-01

    In poultry production Escherichia coli autogenous vaccines are often used. However, the efficacy of autogenous E. coli vaccinations has not been evaluated experimentally in chickens after start of lay. The aim of the present study was to evaluate the protective effect of an autogenous E. coli...... vaccine in broiler breeders. Three groups of 28 weeks old broiler breeders (unvaccinated, vaccinated once and twice, respectively) were challenged with a homologous E. coli strain (same strain as included in the vaccine) or a heterologous challenge strain in an experimental ascending model. The clinical...... outcome was most pronounced in the unvaccinated group; however, the vast majority of chickens in the vaccinated groups had severe pathological manifestations similar to findings in the unvaccinated group after challenge with a homologous as well as a heterologous E. coli strain. Although significant titer...

  7. Contribution to modeling of the reflooding of a severely damaged reactor core using PRELUDE experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Bachrata, A.; Fichot, F.; Repetto, G. [Institut de Radioprotection et de Surete Nucleaire IRSN, Cadarache (France); Quintard, M. [Universite de Toulouse, INPT, UPS, IMFT Institut de Mecanique des Fluides de Toulouse, Allee Camille Soula, F-31400 Toulouse (France); CNRS, IMFT, F-31400 Toulouse (France); Fleurot, J. [Institut de Radioprotection et de Surete Nucleaire IRSN, Cadarache (France)

    2012-07-01

    In case of accident at a nuclear power plant, water sources may not be available for a long period of time and the core heats up due to the residual power. The reflooding (injection of water into core) may be applied if the availability of safety injection is recovered during accident. If the injection becomes available only in the late phase of accident, water will enter a core configuration that will differ significantly from original rod-bundle geometry. Any attempt to inject water after significant core degradation can lead to further fragmentation of core material. The fragmentation of fuel rods may result in the formation of a 'debris bed'. The typical particle size in a debris bed might reach few millimeters (characteristic length-scale: 1 to 5 mm), i.e., a high permeability porous medium. The French 'Institut de Radioprotection et de Surete Nucleaire' is developing experimental programs (PEARL and PRELUDE) and simulation tools (ICARE-CATHARE and ASTEC) to study and optimize the severe accident management strategy and to assess the probabilities to stop the progress of in-vessel core degradation. It is shown that the quench front exhibits either a ID behaviour or a 2D one, depending on injection rate or bed characteristics. The PRELUDE experiment covers a rather large range of variation of parameters, for which the developed model appears to be quite predictive. (authors)

  8. Abrupt or gradual increases in photoperiod for broiler breeders ...

    African Journals Online (AJOL)

    Broiler breeders transferred from closed rearing to curtain-sided adult accommodation (similar to that in which a large proportion of broiler breeders are housed) respond similarly to abrupt and gradual increases in daylength as do birds maintained throughout in controlled environment accommodation, and modern ...

  9. The response of broiler breeder hens to dietary balanced protein

    African Journals Online (AJOL)

    Research

    2016-08-26

    Aug 26, 2016 ... overconsumption of protein and energy. Various estimates of the daily intake of protein required by broiler breeders to support egg production have been made by researchers in the past, these varying from 16.5 g/d, for individually housed breeders. (Pearson & Herron, 1982) to 22 g/d (Waldroup et al., ...

  10. Parameters for quantification of hunger in broiler breeders.

    NARCIS (Netherlands)

    Jong, de I.C.; Voorst, van A.S.; Blokhuis, H.J.

    2003-01-01

    The commercial restricted feeding programme of broiler breeders has a major negative effect on welfare, as the birds are continuously hungry. Objective parameters of hunger are needed to evaluate new management or feeding systems that may alleviate hunger and thus improve broiler breeder welfare.

  11. Staphylococcus agnetis, a potential pathogen in broiler breeders

    DEFF Research Database (Denmark)

    Poulsen, Louise Ladefoged; Thøfner, Ida; Bisgaard, Magne

    2017-01-01

    including bacteriological examination. In total 997 breeders were investigated and for the first time Staphylococcus agnetis was isolated in pure culture from cases of endocarditis and septicemia from 16 broiler breeders. In addition, the cloacal flora from newly hatched chickens originating from the same...

  12. Characteristics of Reproductive Tracts of Repeat Breeders in Cattle ...

    African Journals Online (AJOL)

    The study observed the characteristics and assessed abnormalities in reproductive tracts of repeat breeders in cattle. Fourty (40) herds were sampled during the study and fifty seven (57) repeat breeders were identified. The animals had normal reproductive tracts with good body condition scores (BCS) ranging from 2.5- 4.5 ...

  13. Contribution of reactor physics in past and future. Is reactor physics useful?

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, Toshikazu [Osaka Univ. (Japan); Kosaka, Shinya [TEPCO Systems Co. (Japan); Tatsumi, Masahiro [Nuclear Fuel Industries Ltd., Tokyo (Japan)] (and others)

    2003-02-01

    Reactor Physics is a science to create rector and to play an important role in application to calculation science and safety evaluation. This feature articles contains topics, interested problems and development problems in the following field of reactor physics such as theory and experiment of reactor physics, core control, safety evaluation, criticality safety, accelerator driven subcritical reactor (ADS), new type reactor and evaluation of reactor physics. An original nuclear calculation method developed in Japan has been applied to design and analysis of fast breeder reactor. Interested problems are a proposal of fundamental principles of progressive reactor, development of calculation science, new knowledge by application of best estimate method to safety evaluation and investigation of complicated phenomena of criticality safety. (S.Y.)

  14. Health and Safety Considerations Associated with Sodium-Cooled Experimental Nuclear Fuel Dismantlement

    Energy Technology Data Exchange (ETDEWEB)

    Carvo, Alan E. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    Between the mid-1970s and the mid-1980s Sandia National Laboratory constructed eleven experimental assemblies to simulate debris beds formed in a sodium-cooled fast breeder reactor. All but one of the assemblies were irradiated. The experimental assemblies were transferred to the Idaho National Laboratory (INL) in 2007 and 2008 for storage, dismantlement, recovery of the uranium for reuse in the nuclear fuel cycle, and disposal of unneeded materials. This paper addresses the effort to dismantle the assemblies down to the primary containment vessel and repackage them for temporary storage until such time as equipment necessary for sodium separation is in place.

  15. High power 1 MeV neutral beam system and its application plan for the international tokamak experimental reactor

    Energy Technology Data Exchange (ETDEWEB)

    Hemsworth, R.S. [ITER Joint Central Team, Naka, Ibaraki (Japan)

    1997-03-01

    This paper describes the Neutral Beam Injection system which is presently being designed for the International Tokamak Experimental Reactor, ITER, in Europe Japan and Russia, with co-ordination by the Joint Central Team of ITER at Naka, Japan. The proposed system consists of three negative ion based neutral injectors, delivering a total of 50 MW of 1 MeV D{sup 0} to the ITER plasma for a pulse length of >1000 s. Each injectors uses a single caesiated volume arc discharge negative ion source, and a multi-grid, multi-aperture accelerator, to produce about 40 A of 1 MeV D{sup -}. This will be neutralized by collisions with D{sub 2} in a sub-divided gas neutralizer, which has a conversion efficiency of about 60%. The charged fraction of the beam emerging from the neutralizer is dumped in an electrostatic residual ion dump. A water cooled calorimeter can be moved into the beam path to intercept the neutral beam, allowing commissioning of the injector independent of ITER. ITER is scheduled to produce its first plasma at the beginning of 2008, and the planning of the R and D, construction and installation foresees the neutral injection system being available from the start of ITER operations. (author)

  16. Modeling of secondary emission processes in the negative ion based electrostatic accelerator of the International Thermonuclear Experimental Reactor

    Directory of Open Access Journals (Sweden)

    G. Fubiani

    2008-01-01

    Full Text Available The negative ion electrostatic accelerator for the neutral beam injector of the International Thermonuclear Experimental Reactor (ITER is designed to deliver a negative deuterium current of 40 A at 1 MeV. Inside the accelerator there are several types of interactions that may create secondary particles. The dominating process originates from the single and double stripping of the accelerated negative ion by collision with the residual molecular deuterium gas (≃29% losses. The resulting secondary particles (positive ions, neutrals, and electrons are accelerated and deflected by the electric and magnetic fields inside the accelerator and may induce more secondaries after a likely impact with the accelerator grids. This chain of reactions is responsible for a non-negligible heat load on the grids and must be understood in detail. In this paper, we will provide a comprehensive summary of the physics involved in the process of secondary emission in a typical ITER-like negative ion electrostatic accelerator together with a precise description of the numerical method and approximations involved. As an example, the multiaperture-multigrid accelerator concept will be discussed.

  17. Analysis of quench-vent pressures for present design of ITER (International Thermonuclear Experimental Reactor) TF (toroidal field) coils

    Energy Technology Data Exchange (ETDEWEB)

    Slack, D.S.

    1989-09-20

    The International Thermonuclear Experimental Reactor (ITER) is a new tokamak design project with joint participation from Japan, the European Community, the Union of the Soviet Union, and the United States. This paper examines the effects of a quench within the toroidal field (TF) coils based on current ITER design. It is a preliminary, rough analysis. Its intent is to assist ITER designers while more accurate computer codes are being developed and to provide a check against these more rigorous solutions. Rigorous solutions to the quench problem are very complex involving three- dimensional heat transfer, extreme changes in heat capacities and copper resistivity, and varying flow dynamics within the conductors. This analysis addresses all these factors in an approximate way. The result is much less accurate than a rigorous analysis. Results here could be in error as much as 30 to 40 percent. However, it is believed that this paper can still be very useful to the coil designer. Coil pressures and temperatures vs time into a quench are presented. Rate of helium vent, energy deposition in the coil, and depletion of magnetic stored energy are also presented. Peak pressures are high (about 43 MPa). This is due to the very long vent path length (446 m), small hydraulic diameters, and high current densities associated with ITER's cable-in-conduit design. The effects of these pressures as well as the ability of the coil to be self protecting during a quench are discussed. 3 refs., 1 fig., 3 tabs.

  18. Recent progress on the hydrogen storage properties of ZrCo-based alloys applied in International Thermonuclear Experimental Reactor (ITER

    Directory of Open Access Journals (Sweden)

    Feng Wang

    2017-02-01

    Full Text Available Under the development of International Thermonuclear Experimental Reactor (ITER system aimed at realizing the controllable fusion reaction to solve the energy crisis fundamentally, there is an urgent need to find an appropriate material for tritium handling. ZrCo alloy is considered to be a promising candidate for the storage and delivery of hydrogen isotopes due to the favorable characteristics such as low plateau pressure for absorption, high dissociation pressure at moderate temperature and better ability of trapping 3He. However, the hydrogen induced disproportionation and the slower recovery/deliverty rate of ZrCo-based alloys have limited their further application in ITER system. This review summarizes the efforts towards enhancing the hydrogen storage properties of ZrCo-based alloys including element substitution, surface modification, disproportionation mechanism investigation and the isotope effect study. Element substitution and surface modification play positive role to improve the anti-disproportionation ability and kinetic property of the alloys. However, the ZrCo-based alloys require to be further modified by more attempts such as new composition, novelty modification method or catalyst addition in order to better satisfy the application demands for tritium handling. Moreover, new insight for further understanding the inner disproportionation mechanisms of this material is needed by combining the advance characterization and theoretical analysis, which is in favor of addressing the disproportionation problem of the ZrCo-based alloys essentially.

  19. The effect of arginine dietary supplementation in broiler breeder hens on offspring humoral and cell-mediated immune responses

    Directory of Open Access Journals (Sweden)

    AE Murakami

    2014-06-01

    Full Text Available The influence of supplementing the diet of broiler breeder hens with arginine (Arg on their offspring's humoral and cell-mediated immune response was evaluated in two experiments. In experiments I and II, breeder hens were fed diets containing graded levels of Arg (0.943, 1.093, 1.243, 1.393 and 1.543% digestible Arg. In experiment I, the offspring was randomly grouped according to the treatment received by the breeder hens, with five levels of Arg in the maternal diet and six replicates, giving a total 30 experimental units. In experiment II, the offspring were grouped in accordance with the treatment received by the breeder hens; however, Arg was added to the starter diet (1.300, 1.450, 1.600, 1.750 and 1.900% digestible Arg and also the growing diet (1.150, 1.300, 1.450, 1.600 and 1.750% digestible Arg. Supplementation of the broiler breeder hen diet did not influence (p > 0.05 the development of the lymphoid organs (cloacal bursa, thymus and spleen of the offspring, whether their diet were supplemented or not. Nevertheless, greater weight and dimensions cloacal bursa were found in the supplemented offspring in comparison with the nonsupplemented offspring. Macrophage phagocytic activity was found to be unaffected (p > 0.05, independently of the Arg supplementation. The offspring fed with supplemented diets showed a linear reduction in the antibody titer against Newcastle Disease (p 0.05 by the breeder hen diet. This study concluded that supplementing the breeder hen diet with arginine is insufficient to improve the humoral and cellular immune response, requiring supplementation of the offspring diet.

  20. Preliminary neutronics design and analysis of helium cooled solid breeder blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Zhongliang; Chen, Hongli, E-mail: hlchen1@ustc.edu.cn; Chen, Chong; Li, Min; Zhou, Guangming

    2015-06-15

    Highlights: • Neutronics design of a helium cooled solid breeder blanket for CFETR was presented. • The breeding zones parallel to FW and perpendicular to FW were optimized. • A series of neutronics analyses for the proposed blanket were shown. - Abstract: Chinese Fusion Engineering Test Reactor (CFETR) is a test tokamak reactor being designed in China to bridge the gap between ITER and future fusion power plant. Tritium self-sufficiency is one of the most important issues for CFETR and the tritium breeding ratio (TBR) is recommended not less than 1.2. As one of the candidates, a helium cooled solid breeder blanket for CFETR superconducting tokamak option was proposed. In the concept, radial arranged U-shaped breeding zones are adopted for higher TBR and simpler structure. In this work, three-dimensional neutronics design and analysis of the blanket were performed using the Monte Carlo N-Particle transport code MCNP with IAEA data library FENDL-2.1. Tritium breeding capability of the proposed blanket was assessed and the breeding zones parallel to first wall (FW) and perpendicular to FW were optimized. Meanwhile, the nuclear heating analysis and shielding performance were also presented for later thermal and structural analysis. The results showed that the blanket could well meet the tritium self-sufficiency target and the neutron shield could satisfy the design requirements.

  1. Seismic design technology for Breeder Reactor structures. Volume 3: special topics in reactor structures

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P. (ed)

    1983-04-01

    This volume is divided into six chapters: analysis techniques, equivalent damping values, probabilistic design factors, design verifications, equivalent response cycles for fatigue analysis, and seismic isolation. (JDB)

  2. Vitamin E and selenium in broiler breeder diets: Effect on live performance, hatching process, and chick quality.

    Science.gov (United States)

    Urso, U R A; Dahlke, F; Maiorka, A; Bueno, I J M; Schneider, A F; Surek, D; Rocha, C

    2015-05-01

    This study evaluated the effect of different dietary vitamin E levels and different selenium sources on the productive and reproductive performance of broiler breeders. In total 640 females and 64 males between 22 and 52 weeks old were studied. A completely randomized experimental design in factorial arrangement, with 4 treatments of 8 replicates with 20 females and 2 males each, was applied. Treatments consisted of 2 vitamin E levels (30 and 120 mg/kg) and two selenium sources (sodium selenite and zinc-L-selenomethionine). Egg production (rate of lay and eggs per breeder), egg characteristics (egg, yolk, eggshell, and albumen weights), fertility, incubation responses (egg weight loss during incubation, hatchability, and hatching window), and hatchling characteristics (weight and yield) were evaluated. There was no influence of dietary vitamin E levels or selenium sources on egg production (P > 0.05). Mature breeders (47 weeks old) fed zinc-L-selenomethionine and 120 mg vitamin E/kg feed produced heavier eggs and albumen. Hatchability of the eggs of breeders fed 120 mg vitamin E/kg feed was higher than breeders fed 30 mg vitamin at 29 wks. The dietary inclusion of organic selenium also promoted heavier hatchling weight until egg production peak (33 wk), but did not influence hatchling quality or hatching window. It was concluded that the dietary supplementation of zinc-L-selenomethione and vitamin E (120 mg/kg feed) could be used to improve egg characteristics and incubation response. © 2015 Poultry Science Association Inc.

  3. Commissioning of the STAR test section for experimental simulation of loss of coolant accident using the EC-208 instrumented fuel assembly of the IEA-R1 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Maprelian, Eduardo; Torres, Walmir M.; Prado, Adelk C.; Umbehaun, Pedro E.; Franca, Renato L.; Santos, Samuel C.; Macedo, Luiz A.; Sabundjian, Gaiane, E-mail: emaprel@ipen.br, E-mail: wmtorres@ipen.br, E-mail: acprado@ipen.br, E-mail: umbehaun@ipen.br, E-mail: rlfranca@ipen.br, E-mail: samuelcs@ipen.br, E-mail: lamacedo@ipen.br, E-mail: gdjian@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SO (Brazil)

    2015-07-01

    The three basic safety functions of Research Reactors (RR) are the safe shutdown of the reactor, the proper cooling of the decay heat of the fuel elements and the confinement of radioactive materials. Compared to Nuclear Power Reactors, RR power release is small, yet its three safety functions must be met to ensure the integrity of the reactor. During a loss of coolant accident (LOCA) in pool type RR, partial or complete loss of pool water may occur, with consequent partial or complete uncovering of the fuel assemblies. In such an accident, the decay heat removal safety function must not be compromised. The Test Section for Experimental Simulation of Loss of Coolant Accident (STAR) is in commissioning phase. This test section will provide experimental data on partial and total uncovering of the EC-208 instrumented fuel assembly (IFA) irradiated in the IEA-R1. Experimental results will be useful in validation of computer codes for RR safety analysis, particularly on heat removal efficiency aspects (safety function) in accident conditions. STAR comprises a base on which is installed the IFA, the cylindrical stainless steel hull, the compressed air system for the test section emptying and refilling, and the instrumentation for temperature and level measurements. The commissioning tests or pre-operational check, consist of several preliminary tests to verify experimental procedures, the difficulties during assembling of STAR in the pool, the difficulties in control the emptying and refilling velocities, as well as, the repeatability capacity, tests of equipment, valves and systems and tests of instrumentation and data acquisition system. Safety, accuracy and easiness of operation will be checked. (author)

  4. Gas-cooled reactors: the importance of their development

    Energy Technology Data Exchange (ETDEWEB)

    Kasten, P.R.

    1979-06-01

    The nearest term GCR is the steam-cycle HTGR, which can be used for both power and process steam production. Use of SC-HTGRs permits timely introduction of thorium fuel cycles and of high-thermal-efficiency reactors, decreasing the need for mined U/sub 3/O/sub 8/ before arrival of symbiotic fueling of fast-thermal reactor systems. The gas-turbine HTGR offers prospects of lower capital costs than other nuclear reactors, but it appears to require longer and more costly development than the SC-HTGR. Accelerated development of the GT-HTGR is needed to gain the advantages of timely introduction. The Gas-Cooled Fast Breeder Reactor (GCFR) offers the possibility of fast breeder reactors with lower capital costs and with higher breeding ratios from oxide fuels. The VHTR provides high-temperature heat for hydrogen production.

  5. An analysis system for in-reactor behavior, FANTASI

    Energy Technology Data Exchange (ETDEWEB)

    Uto, Nariaki; Tsukimori, Kazuyuki; Negishi, Hitoshi; Enuma, Yasuhiro; Sugaya, Toshio; Sakai, Kimiaki [Japan Nucler Cycle Developmnet Inst., Tokai, Ibaraki (Japan)

    2001-06-01

    The Japan Nuclear Fuel Cycle Development Institute developed FANTASI (A Computational System For Analyzing Coupled Neutronic, Thermal-Hydraulic And Structural Behaviors In A Fast Breeder Reactor Core) to simulate a conditions where nuclear reaction, thermal-hydraulic behavior of coolant and deformation of core construction progress under mutual relation in reactor of a fast breeder reactor by cooperation of engineers in the fields of physics, thermal-hydraulics, structure, and information system on reactor. Here was described on system construction of FANTASI after describing progress of this development. And then, after introducing a case study using this system, applicability to transient phenomena in nuclear reactor was described. At last, with summarizing results of this development, its future development was also mentioned. (G.K.)

  6. Nitritation performance and biofilm development of co- and counter-diffusion biofilm reactors: Modeling and experimental comparison

    DEFF Research Database (Denmark)

    Wang, Rongchang; Terada, Akihiko; Lackner, Susanne

    2009-01-01

    A comparative study was conducted on the start-up performance and biofilm development in two different biofilm reactors with aim of obtaining partial nitritation. The reactors were both operated under oxygen limited conditions, but differed in geometry. While substrates (O-2, NH3) co...... results showed that the counter-diffusion biofilms developed faster and attained a larger maximum biofilm thickness than the co-diffusion biofilms. Under oxygen limited condition (DO

  7. Brewer's Grain from Cameroon Brewery in Breeder Chicken Rations : Effect on Productive and Reproductive Performance

    Directory of Open Access Journals (Sweden)

    Mafeni, MJ.

    2001-01-01

    Full Text Available In order to evaluate the effect of brewer's dried grain (BDG on the productive and reproductive traits in breeder chickens, 120 laying hens and 12 cocks of ISA commercial breed were subjected to dietary treatments containing 0, 10, 20, and 30 % levels of BDG. Feed and water were provided ad libitum over the 5-months experimental period. Reproductive and productive traits such as egg production, egg weight, albumen height, shell weight, semen quantity fertility and hatchability of fertile eggs were measured. Results indicated that when BDG was fed at the 30 % level in the ration, the hen-day egg production (50.6 % was significantly (P of inclusion. There was a significant (P 0.05 was noticed between treatments for ratio of shell weight to egg weight, albumen height, semen quantity and fertility. The results suggest that although the 30 % level of BDG can be tolerated, the 20 %, level of BDG inclusion is more appropriate for breeder birds.

  8. A Framework for Human Performance Criteria for Advanced Reactor Operational Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Jacques V Hugo; David I Gertman; Jeffrey C Joe

    2014-08-01

    This report supports the determination of new Operational Concept models needed in support of the operational design of new reactors. The objective of this research is to establish the technical bases for human performance and human performance criteria frameworks, models, and guidance for operational concepts for advanced reactor designs. The report includes a discussion of operating principles for advanced reactors, the human performance issues and requirements for human performance based upon work domain analysis and current regulatory requirements, and a description of general human performance criteria. The major findings and key observations to date are that there is some operating experience that informs operational concepts for baseline designs for SFR and HGTRs, with the Experimental Breeder Reactor-II (EBR-II) as a best-case predecessor design. This report summarizes the theoretical and operational foundations for the development of a framework and model for human performance criteria that will influence the development of future Operational Concepts. The report also highlights issues associated with advanced reactor design and clarifies and codifies the identified aspects of technology and operating scenarios.

  9. Power generation costs for alternate reactor fuel cycles

    Energy Technology Data Exchange (ETDEWEB)

    Smolen, G.R.; Delene, J.G.

    1980-09-01

    The total electric generating costs at the power plant busbar are estimated for various nuclear reactor fuel cycles which may be considered for power generation in the future. The reactor systems include pressurized water reactors (PWR), heavy-water reactors (HWR), high-temperature gas cooled reactors (HTGR), liquid-metal fast breeder reactors (LMFBR), light-water pre-breeder and breeder reactors (LWPR, LWBR), and a fast mixed spectrum reactor (FMSR). Fuel cycles include once-through, uranium-only recycle, and full recycle of the uranium and plutonium in the spent fuel assemblies. The U/sub 3/O/sub 8/ price for economic transition from once-through LWR fuel cycles to both PWR recycle and LMFBR systems is estimated. Electric power generation costs were determined both for a reference set of unit cost parameters and for a range of uncertainty in these parameters. In addition, cost sensitivity parameters are provided so that independent estimations can be made for alternate cost assumptions.

  10. Thermal-Hydraulic Analysis of an Experimental Reactor Cavity Cooling System with Air. Part I: Experiments; Part II: Separate Effects Tests and Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Corradin, Michael [Univ. of Wisconsin, Madison, WI (United States). Dept. of Engineering Physics; Anderson, M. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Engineering Physics; Muci, M. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Engineering Physics; Hassan, Yassin [Texas A & M Univ., College Station, TX (United States); Dominguez, A. [Texas A & M Univ., College Station, TX (United States); Tokuhiro, Akira [Univ. of Idaho, Moscow, ID (United States); Hamman, K. [Univ. of Idaho, Moscow, ID (United States)

    2014-10-15

    This experimental study investigates the thermal hydraulic behavior and the heat removal performance for a scaled Reactor Cavity Cooling System (RCCS) with air. A quarter-scale RCCS facility was designed and built based on a full-scale General Atomics (GA) RCCS design concept for the Modular High Temperature Gas Reactor (MHTGR). The GA RCCS is a passive cooling system that draws in air to use as the cooling fluid to remove heat radiated from the reactor pressure vessel to the air-cooled riser tubes and discharged the heated air into the atmosphere. Scaling laws were used to preserve key aspects and to maintain similarity. The scaled air RCCS facility at UW-Madison is a quarter-scale reduced length experiment housing six riser ducts that represent a 9.5° sector slice of the full-scale GA air RCCS concept. Radiant heaters were used to simulate the heat radiation from the reactor pressure vessel. The maximum power that can be achieved with the radiant heaters is 40 kW with a peak heat flux of 25 kW per meter squared. The quarter-scale RCCS was run under different heat loading cases and operated successfully. Instabilities were observed in some experiments in which one of the two exhaust ducts experienced a flow reversal for a period of time. The data and analysis presented show that the RCCS has promising potential to be a decay heat removal system during an accident scenario.

  11. Iron requirements of broiler breeder hens.

    Science.gov (United States)

    Taschetto, Diogo; Vieira, Sergio Luiz; Angel, Clara Roselina; Stefanello, Catarina; Kindlein, Liris; Ebbing, Marco Antonio; Simões, Cristina Tonial

    2017-09-01

    A study was conducted to investigate Fe requirements of broiler breeders. One-hundred-fifty-six Cobb 500 broiler breeder hens were individually placed in electrostatically painted cages at 22 weeks. The study was composed of an adaptation phase, in which hens were fed corn-soy-wheat bran diets until 35 wks. An Fe deficient mash diet (24.6 ppm Fe) was provided from 35 to 46 wk in order to induce a partial body Fe depletion. A production phase followed from 47 to 70 wk when hens were fed 6 diets with increasing Fe sulfate supplementation, which, upon analyses had 24.6, 48.6, 74.3, 99.6, 125.6, and 148.2 ppm Fe. Thirty hatching eggs from each treatment were randomly collected in the last wk of each production period and incubated. Hemoglobin and hematocrit were analyzed from 6 hens as well as all hatched chicks per treatment. Analyses of production and hatching data were conducted using quadratic polynomial (QP), broken-line (BL), and exponential asymptotic (EA) models. Effects of dietary Fe were observed for total eggs and total hatching eggs, egg yolk Fe content, and hen and chick hematocrit and hemoglobin (P < 0.05). These responses to added Fe were optimized when dietary Fe were 96.8, 97.1, 130.6, 122.6, 120.0, and 125.0 ppm (QP) and 76.4, 89.3, 135.0, 128.4, 133.8, and 95.0 ppm (BL) for total hatching eggs, egg yolk Fe content, and hen and chick hematocrit and hemoglobin, respectively. Optimization with the EA model was obtained for total hatching eggs, egg yolk Fe, and hen and chick hemoglobin at 97.9, 111.0, 77.9, and 96.3 ppm Fe for total hatching eggs, egg yolk Fe, and hen and chick hemoglobin, respectively. Adequate Fe levels are needed to maintain egg production as well as hatching chicks' indexes. Fe concentration in the yolk and diet are positively influenced. The average of all Fe requirement estimates obtained in the present study was 106 ppm total Fe, whereas averaged values for BL, QP, and EA models were 107, 113, and 97 ppm Fe, respectively. © 2017

  12. Experimental evaluation of two different types of reactors for CO2 removal from gaseous stream by bottom ash accelerated carbonation.

    Science.gov (United States)

    Lombardi, L; Carnevale, E A; Pecorini, I

    2016-12-01

    Low methane content landfill gas may be enriched by removing carbon dioxide. An innovative process, based on carbon dioxide capture and storage by means of accelerated carbonation of bottom ash is proposed and studied for the above purpose. Within this research framework we devoted a preliminary research activity to investigate the possibility of improving the way the contact between bottom ash and landfill gas takes place: this is the scope of the work reported in this paper. Two different types of reactors - fixed bed and rotating drum - were designed and constructed for this purpose. The process was investigated at laboratory scale. As the aim of this phase was the comparison of the performances of the two different reactors, we used a pure stream of CO2 to preliminarily evaluate the reactor behaviors in the most favorable condition for the process (i.e. maximum CO2 partial pressure at ambient condition). With respect to the simple fixed bed reactor concept, some modifications were proposed, consisting of separating the ash bed in three layers. With the three layer configuration we would like to reduce the possibility for the gas to follow preferential paths through the ash bed. However, the results showed that the process performances are not significantly influenced by the multiple layer arrangement. As an alternative to the fixed bed reactor, the rotating drum concept was selected in order to provide continuous mixing of the solids. Two operating parameters were considered and varied during the tests: the filling ratio and the rotating speed. Better performances were observed for lower filling ratio while the rotating speed showed minor importance. Finally the performances of the two reactors were compared. The rotating drum reactor is able to provide improved carbon dioxide removal with respect to the fixed bed one, especially when the rotating reactor is operated at low filling ratio values and slow rotating speed values. Comparing the carbon dioxide

  13. Dr Robert Aymar, Director of the International Thermonuclear Experimental Reactor (ITER), was nominated to succeed Professor Luciano Maiani as CERN's Director General, to take office on 1 January 2004.

    CERN Document Server

    2002-01-01

    Dr Robert Aymar, Director of the International Thermonuclear Experimental Reactor (ITER), was nominated to succeed Professor Luciano Maiani as CERN's Director General, to take office on 1 January 2004.

  14. ECRIS as ion source and charge breeder

    CERN Document Server

    Sortais, P; Chauvin, N; Curdy, Jean Claude; Geller, R; Lamy, T; Solé, P; Vieux-Rochaz, J L

    2002-01-01

    We will recall the main characteristics of ECR ion sources and their very good property of ionization efficiency. We will start with a review of on line use of ECR ion sources for production of mono or multicharged radioactive ions, and then we will specially focus our attention on charge breeding process for multicharged ion production. Initially developed for the PIAFE project from ISN Grenoble, the ECR charge breeder shows that the beam injection of a primary beam inside an ECR ion source is a very general process for beam production. We will review the latest results obtained on the ISN Grenoble test bench for the production of CW or pulsed metallic ion beams with the so called '1 sup + /n sup + ' method. New results are given for CW operation where the efficiency is particularly optimized for application to multicharged radioactive ion production (for example, 3.5% for Zn sup 1 sup +->Zn sup 9 sup + , 4.2% for Pb sup 3 sup +->Pb sup 2 sup 4 sup + , 5% for Rb sup 1 sup +->Rb sup 1 sup 5 sup +). Different ...

  15. Experimental study of local coolant hydrodynamics in TVS-Kvadrat PWR reactor fuel assembly using mixing spacer grids with different types of deflectors

    Directory of Open Access Journals (Sweden)

    S.M. Dmitriev

    2015-12-01

    Full Text Available Results of experimental studies of local hydrodynamic characteristics of coolant flow in fuel assemblies of RWR reactors using different types of mixing spacer grids are presented. Specific features and regularities of coolant flow in fuel pin bundles of TVS-KVADRAT fuel assemblies with different types of mixing spacer grids were revealed in the course of experiments. Analysis of space distribution of projections of absolute flow velocity allowed detailed description of coolant flow beyond the spacer grid with installation of three different types of deflectors. Optimal design of deflector for spacer grid of the TVS-KVADRAT fuel assembly in the standard cell in the area of guiding channels was identified. Results of studies of local hydrodynamics of coolant flow in the TVS-KVADRAT fuel assembly are accepted for subsequent practical application by the JSC Afrikantov Experimental Design Bureau for Mechanical Engineering (OKBM in the evaluations of thermal engineering reliability of PWR reactor cores and were included in the database for verification of computational fluid dynamic codes (CFD-codes and implementation of detailed cell array calculations of PWR reactor cores.

  16. Breeding zone models of DEMO ceramic helium cooled blanket test module for testing in IVV-2M reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kovalenko, V.; Kiryiak, L.; Lopatkin, A.; Marachev, A.; Muratov, V.; Strebkov, Yr. [Federal State Unitary Enterprise ' ' Dollezhal Research and Development Inst. of Power Engineering' ' , Moscow (Russian Federation); Davydov, D.; Kapyshev, V.; Kazennov, Yr.; Tebus, V. [Federal State Unitary Enterprise ' ' A.A. Bochvar All-Russia Research Inst. of Inorganic Materials' ' , Moscow (Russian Federation)

    2002-06-01

    The goal of DEMO ceramic helium cooled blanket test module (CHC BTM) is to demonstrate a breeding capability that would lead to tritium self-sufficiency in ITER reactor and to extract a high-grade heat suitable for electricity generation. Experimental validation of all the adopted design solutions is main important problem at design and calculation works carrying out in order to develop the CHC BTM. One important task for breeding zones feasibility validation is in-pile tests. Two models were developed and fabricated for testing in the fission IVV-2M reactor. Breeding zone is based on poloidal BIT-conception. The models structural material is ferrito-martensitic steel. Breeder material is lithium orthosilicate in pebble beds and pellet forms. Multiplier material is beryllium in pebble beds and porosity forms. The cooling is provided by helium at 10 MPa. The tritium produced in the breeder material is purged by the helium flow at 0.1-0.2 MPa. Designs of model description and experimental channel, results of neutronic and thermo-hydraulic calculations are presented in the paper. (orig.)

  17. Conceptual design of solid breeder blanket system cooled by supercritical water

    Energy Technology Data Exchange (ETDEWEB)

    Enoeda, Mikio; Akiba, Masato [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Ohara, Yoshihiro [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment] [and others

    2001-12-01

    This report is a summary of the design works, which was discussed in the design workshop held in 2000 for the demonstration (DEMO) blanket aimed to strengthen the commercial competitiveness and technical feasibility simultaneously. The discussion of the Fusion Council in 1999 updated the assessment of the mission of DEMO blanket. Updated mission of the DEMO blanket is to be the prototype of the commercially competitive power plant. The DEMO blanket must supply the feasibility and experience of the total design of the power plant and the materials. From such standing point, the conceptual design study was performed to determine the updated strategy and goal of the R and D of the DEMO blanket which applies the supercritical water cooling proposed in A-SSTR, taking into account the recent progress of the plasma research and reactor engineering technology. The DEMO blanket applies the solid breeder materials and supercritical water cooling. The product tritium is purged out by helium gas stream in the breeder region. In the breeder region, the pebble bed concept was applied to withstand instable cracking of the breeder and multiplier materials in high neutron irradiation and high temperature operation. Inlet temperature of the coolant is planned to be 280degC and final outlet temperature is 510degC to obtain high energy conversion efficiency up to 43%. Reduced activation ferritic steel, F82H and ODS ferritic steel were selected as the structural material. Lithium ceramics, Li{sub 2}TiO{sub 3} or Li{sub 2}O were selected as the breeder materials. Beryllium or its inter-metallic compound Be12Ti was selected as the neutron multiplier materials. Basic module structure was selected as the box type structure which enables the remote handling replacement of the module from in-vessel access. Dimension of the box is limited to 2 m x 2 m, or smaller, due to the dimension of the replacement port. In the supercritical water cooling, the high coolant temperature is the merit for

  18. Environmental Enrichment for Broiler Breeders: An Undeveloped Field.

    Science.gov (United States)

    Riber, Anja B; de Jong, Ingrid C; van de Weerd, Heleen A; Steenfeldt, Sanna

    2017-01-01

    Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types of environmental enrichment for broiler breeders, which have been described in the scientific literature, on behavior and welfare. Environmental enrichment is defined as an improvement of the environment of captive animals, which increases the behavioral opportunities of the animal and leads to improvements in biological function. This definition has been broadened to include practical and economic aspects as any enrichment strategy that adversely affects the health of animals (e.g., environmental hygiene), or that has too many economic or practical constraints will never be implemented on commercial farms and thus never benefit animals. Environmental enrichment for broiler breeders often has the purpose of satisfying the behavioral motivations for feeding and foraging, resting, and/or encouraging normal sexual behavior. Potentially successful enrichments for broiler breeders are elevated resting places, cover panels, and substrate (for broiler breeders housed in cage systems). However, most of the ideas for environmental enrichment for broiler breeders need to be further developed and studied with respect to the use, the effect on behavior and welfare, and the interaction with genotype and production system. In addition, information on practical use and the economics of the production system is often lacking although it is important for application in practice.

  19. Advanced burner test reactor preconceptual design report.

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y. I.; Finck, P. J.; Grandy, C.; Cahalan, J.; Deitrich, L.; Dunn, F.; Fallin, D.; Farmer, M.; Fanning, T.; Kim, T.; Krajtl, L.; Lomperski, S.; Moisseytsev, A.; Momozaki, Y.; Sienicki, J.; Park, Y.; Tang, Y.; Reed, C.; Tzanos, C; Wiedmeyer, S.; Yang, W.; Chikazawa, Y.; JAEA

    2008-12-16

    advanced fuel cycle; (2) To qualify the transuranics-containing fuels and advanced structural materials needed for a full-scale ABR; and (3) To support the research, development and demonstration required for certification of an ABR standard design by the U.S. Nuclear Regulatory Commission. The ABTR should also address the following additional objectives: (1) To incorporate and demonstrate innovative design concepts and features that may lead to significant improvements in cost, safety, efficiency, reliability, or other favorable characteristics that could promote public acceptance and future private sector investment in ABRs; (2) To demonstrate improved technologies for safeguards and security; and (3) To support development of the U.S. infrastructure for design, fabrication and construction, testing and deployment of systems, structures and components for the ABRs. Based on these objectives, a pre-conceptual design of a 250 MWt ABTR has been developed; it is documented in this report. In addition to meeting the primary and additional objectives listed above, the lessons learned from fast reactor programs in the U.S. and worldwide and the operating experience of more than a dozen fast reactors around the world, in particular the Experimental Breeder Reactor-II have been incorporated into the design of the ABTR to the extent possible.

  20. CerealsDB 2.0: an integrated resource for plant breeders and scientists

    Directory of Open Access Journals (Sweden)

    Wilkinson Paul A

    2012-09-01

    Full Text Available Abstract Background Food security is an issue that has come under renewed scrutiny amidst concerns that substantial yield increases in cereal crops are required to feed the world’s booming population. Wheat is of fundamental importance in this regard being one of the three most important crops for both human consumption and livestock feed; however, increase in crop yields have not kept pace with the demands of a growing world population. In order to address this issue, plant breeders require new molecular tools to help them identify genes for important agronomic traits that can be introduced into elite varieties. Studies of the genome using next-generation sequencing enable the identification of molecular markers such as single nucleotide polymorphisms that may be used by breeders to identify and follow genes when breeding new varieties. The development and application of next-generation sequencing technologies has made the characterisation of SNP markers in wheat relatively cheap and straightforward. There is a growing need for the widespread dissemination of this information to plant breeders. Description CerealsDB is an online resource containing a range of genomic datasets for wheat (Triticum aestivum that will assist plant breeders and scientists to select the most appropriate markers for marker assisted selection. CerealsDB includes a database which currently contains in excess of 100,000 putative varietal SNPs, of which several thousand have been experimentally validated. In addition, CerealsDB contains databases for DArT markers and EST sequences, and links to a draft genome sequence for the wheat variety Chinese Spring. Conclusion CerealsDB is an open access website that is rapidly becoming an invaluable resource within the wheat research and plant breeding communities.

  1. Autothermal reforming of methane with integrated CO2 capture in a novel fluidized bed membrane reactor. Part 1: experimental demonstration

    NARCIS (Netherlands)

    Gallucci, F.; van Sint Annaland, M.; Kuipers, J.A.M.

    2008-01-01

    Two fluidized bed membrane reactor concepts for hydrogen production via autothermal reforming of methane with integrated CO2 capture are proposed. Ultra-pure hydrogen is obtained via hydrogen perm-selective Pd-based membranes, while the required reaction energy is supplied by oxidizing part of the

  2. Experimental study of a cocurrent upflow packed bed bubble column reactor: pressure drop, holdup and interfacial area

    NARCIS (Netherlands)

    Molga, E.J.; Westerterp, K.R.

    1997-01-01

    Gas¿liquid interfacial areas have been determined by means of chemically enhanced absorption of CO2 into DEA in a packed bed bubble column reactor with an inner diameter of 156 mm. The influence of the gas velocity and particle diameter on the interfacial areas, pressure drops and liquid holdups has

  3. Fluidised bed membrane reactor for ultrapure hydrogen production via methane steam reforming: Experimental demonstration and model validation

    NARCIS (Netherlands)

    Patil, C.S.; van Sint Annaland, M.; Kuipers, J.A.M.

    2007-01-01

    Hydrogen is emerging as a future alternative for mobile and stationary energy carriers in addition to its use in chemical and petrochemical applications. A novel multifunctional reactor concept has been developed for the production of ultrapure hydrogen View the MathML source from light hydrocarbons

  4. Development of safety analysis codes and experimental validation for a very high temperature gas-cooled reactor Final report

    Energy Technology Data Exchange (ETDEWEB)

    Chang Oh

    2006-03-01

    The very high-temperature gas-cooled reactor (VHTR) is envisioned as a single- or dual-purpose reactor for electricity and hydrogen generation. The concept has average coolant temperatures above 9000C and operational fuel temperatures above 12500C. The concept provides the potential for increased energy conversion efficiency and for high-temperature process heat application in addition to power generation. While all the High Temperature Gas Cooled Reactor (HTGR) concepts have sufficiently high temperature to support process heat applications, such as coal gasification, desalination or cogenerative processes, the VHTR’s higher temperatures allow broader applications, including thermochemical hydrogen production. However, the very high temperatures of this reactor concept can be detrimental to safety if a loss-of-coolant accident (LOCA) occurs. Following the loss of coolant through the break and coolant depressurization, air will enter the core through the break by molecular diffusion and ultimately by natural convection, leading to oxidation of the in-core graphite structure and fuel. The oxidation will accelerate heatup of the reactor core and the release of toxic gasses (CO and CO2) and fission products. Thus, without any effective countermeasures, a pipe break may lead to significant fuel damage and fission product release. Prior to the start of this Korean/United States collaboration, no computer codes were available that had been sufficiently developed and validated to reliably simulate a LOCA in the VHTR. Therefore, we have worked for the past three years on developing and validating advanced computational methods for simulating LOCAs in a VHTR. Research Objectives As described above, a pipe break may lead to significant fuel damage and fission product release in the VHTR. The objectives of this Korean/United States collaboration were to develop and validate advanced computational methods for VHTR safety analysis. The methods that have been developed are now

  5. A comparative study of kinetics of nuclear reactors

    Directory of Open Access Journals (Sweden)

    Obaidurrahman Khalilurrahman

    2009-01-01

    Full Text Available The paper deals with the study of reactivity initiated transients to investigate major differences in the kinetics behavior of various reactor systems under different operating conditions. The article also states guidelines to determine the safety limits on reactivity insertion rates. Three systems, light water reactors (pressurized water reactors, heavy water reactors (pressurized heavy water reactors, and fast breeder reactors are considered for the sake of analysis. The upper safe limits for reactivity insertion rate in these reactor systems are determined. The analyses of transients are performed by a point kinetics computer code, PKOK. A simple but accurate method for accounting total reactivity feedback in kinetics calculations is suggested and used. Parameters governing the kinetics behavior of the core are studied under different core states. A few guidelines are discussed to project the possible kinetics trends in the next generation reactors.

  6. Reactivity control assembly for nuclear reactor. [LMFBR

    Science.gov (United States)

    Bollinger, L.R.

    1982-03-17

    This invention, which resulted from a contact with the United States Department of Energy, relates to a control mechanism for a nuclear reactor and, more particularly, to an assembly for selectively shifting different numbers of reactivity modifying rods into and out of the core of a nuclear reactor. It has been proposed heretofore to control the reactivity of a breeder reactor by varying the depth of insertion of control rods (e.g., rods containing a fertile material such as ThO/sub 2/) in the core of the reactor, thereby varying the amount of neutron-thermalizing coolant and the amount of neutron-capturing material in the core. This invention relates to a mechanism which can advantageously be used in this type of reactor control system.

  7. Thermochemical comparison of the effectiveness of protium purging of fusion breeders

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, A.K.; Johnson, C.E.

    1985-07-01

    The tritium breeders for a fusion reactor, Li/sub 2/0, LiAl0/sub 2/, and Li/sub 4/Si0/sub 4/, are compared on a thermochemical basis in respect to their response to protium purging. Two oxygen activity levels, established by H/sub 2/O:H/sub 2/ ratios of 100: 1 and 1:100 are considered at the temperatures 900 and 1300K. In terms of tritium release (all gaseous forms), LiAl0/sub 2/ is better than Li/sub 2/0 and this in turn better than Li/sub 4/Si0/sub 4/. At 900K, Li/sub 2/0 and LiA10/sub 2/ release more tritium than at 1300K. Li/sub 4/Si0/sub 4/ releases more tritium at 1300K than at 900K.

  8. Thermochemical comparison of the effectiveness of protium purging of fusion breeders

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, A.K.; Johnson, C.E.

    1985-01-01

    The tritium breeders for a fusion reactor, Li/sub 2/O, LiAlO/sub 2/, and Li/sub 4/SiO/sub 4/, are compared on a thermochemical basis in respect to their response to protium purging. Two oxygen activity levels, established by H/sub 2/O:H/sub 2/ ratios of 100:1 and 1:100 are considered at the temperatures 900 and 1300K. In terms of tritium release (all gaseous forms). LiAlO/sub 2/ is better than Li/sub 2/O and this in turn better than Li/sub 4/SiO/sub 4/. At 900K, Li/sub 2/O and LiAlO/sub 2/ release more tritium than at 1300K. Li/sub 4/SiO/sub 4/ releases more tritium at 1300K than at 900K.

  9. DEM-CFD simulation of purge gas flow in a solid breeder pebble bed

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hao [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Li, Zhenghong [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); University of Science and Technology of China, Hefei 230027 (China); Guo, Haibing [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Ye, Minyou [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Huang, Hongwen, E-mail: inpclane@sina.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

    2016-12-15

    Solid tritium breeding blanket applying pebble bed concept is promising for fusion reactors. Tritium bred in the pebble bed is purged out by inert gas. The flow characteristics of the purge gas are important for the tritium transport from the solid breeder materials. In this study, a randomly packed pebble bed was generated by Discrete Element Method (DEM) and verified by radial porosity distribution. The flow parameters of the purge gas in channels were solved by Computational Fluid Dynamics (CFD) method. The results show that the normalized velocity magnitudes have the same damped oscillating patterns with radial porosity distribution. Besides, the bypass flow near the wall cannot be ignored in this model, and it has a slight increase with inlet velocity. Furthermore, higher purging efficiency becomes with higher inlet velocity and especially higher in near wall region.

  10. Indian fast reactor technology: Current status and future programme

    Indian Academy of Sciences (India)

    The challenges and achievements in science and technology of FBRs focusing on safety are described with the particular reference to 500 MWe capacity Prototype Fast Breeder Reactor (PFBR), being commissioned at Kalpakkam. Roadmap with comprehensive R&D for the large scale deployment of Sodium Cooled Fast ...

  11. Engineering aspects of heterogeneous and homogeneous reactors

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, Jr, P W

    1977-01-01

    The core arrangement in an LMFBR can potentially affect the lower internals, upper internals, radial shielding, vessel, hot leg transients, head access area and control systems as well as breeding ratio, doubling time and core inventory. This paper describes the results of a study of the impact on these components and parameters that would result if the Clinch River Breeder Reactor were to incorporate a heterogeneous core.

  12. Experimental determination of spectral indices by scanning of fuel rod in the IPEN/MB-01 reactor; Determinacao experimental de indices espectrais por varredura gama de vareta combustivel no reator IPEN/MB-01

    Energy Technology Data Exchange (ETDEWEB)

    Fanaro, Leda Cristina Cabelo Bernardes

    2009-07-01

    In this work, the spectral indexes 28{rho}{sup *} and 25{delta}{sup *}, and gamma efficiency factor in the IPEN/MB-01 reactor were determined experimentally employing a rod scanning technique. In the case of 28{rho}{sup *}, this method has the advantage of eliminating most of the correction factors derived from the calculations. Only the fission yield factor and the relative fission rate in the {sup 235}U remain in the determination of the 25{delta}{sup *}. The experiments were performed with different thicknesses of cadmium sleeves: 0.55 mm, 1.10 mm and 2.20 mm. The final experimental uncertainty achieved in the experiment, less that 1 %, and the excellent geometrical and material data characterization of the IPEN/MB-01 reactor allow to use the results as benchmark for validate calculation methods and related nuclear data libraries. The comparison between calculated values and experimental values was performed by employing the MCNP-5 code and the nuclear data libraries: ENDF/B-VI.8, ENDF/B-VII.0, JENDL-3.3 and JEFF-3.1. The results demonstrate that the difference among libraries is very small. Also, the comparison between calculated values and experimental values shows that there has been considerable progress in the recent nuclear data libraries. The best result is obtained with ENDF/B-VII.0 nuclear data library, and the highest discrepancy was obtained with JEFF-3.1 and JENDL-3.3 nuclear data libraries. (author)

  13. Energy efficient electrocoagulation using a new flow column reactor to remove nitrate from drinking water - Experimental, statistical, and economic approach.

    Science.gov (United States)

    Hashim, Khalid S; Shaw, Andy; Al Khaddar, Rafid; Pedrola, Montserrat Ortoneda; Phipps, David

    2017-07-01

    In this investigation, a new bench-scale electrocoagulation reactor (FCER) has been applied for drinking water denitrification. FCER utilises the concepts of flow column to mix and aerate the water. The water being treated flows through the perforated aluminium disks electrodes, thereby efficiently mixing and aerating the water. As a result, FCER reduces the need for external stirring and aerating devices, which until now have been widely used in the electrocoagulation reactors. Therefore, FCER could be a promising cost-effective alternative to the traditional lab-scale EC reactors. A comprehensive study has been commenced to investigate the performance of the new reactor. This includes the application of FCER to remove nitrate from drinking water. Estimation of the produced amount of H2 gas and the yieldable energy from it, an estimation of its preliminary operating cost, and a SEM (scanning electron microscope) investigation of the influence of the EC process on the morphology of the surface of electrodes. Additionally, an empirical model was developed to reproduce the nitrate removal performance of the FCER. The results obtained indicated that the FCER reduced the nitrate concentration from 100 to 15 mg/L (World Health Organization limitations for infants) after 55 min of electrolysing at initial pH of 7, GBE of 5 mm, CD of 2 mA/cm2, and at operating cost of 0.455 US $/m3. Additionally, it was found that FCER emits H2 gas enough to generate a power of 1.36 kW/m3. Statistically, the relationship between the operating parameters and nitrate removal could be modelled with R2 of 0.848. The obtained SEM images showed a large number dents on anode's surface due to the production of aluminium hydroxides. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  14. Performance of low smeared density sodium-cooled fast reactor metal fuel

    Energy Technology Data Exchange (ETDEWEB)

    Porter, D.L., E-mail: Douglas.Porter@inl.gov; Chichester, H.J.M.; Medvedev, P.G.; Hayes, S.L.; Teague, M.C.

    2015-10-15

    An experiment was performed in the Experimental Breeder Rector-II (EBR-II) in the 1990s to show that metallic fast reactor fuel could be used in reactors with a single, once-through core. To prove the long duration, high burnup, high neutron exposure capability an experiment where the fuel pin was designed with a very large fission gas plenum and very low fuel smeared density (SD). The experiment, X496, operated to only 8.3 at.% burnup because the EBR-II reactor was scheduled for shut-down at that time. Many of the examinations of the fuel pins only funded recently with the resurgence of reactor designs using very high-burnup fuel. The results showed that, despite the low smeared density of 59% the fuel swelled radially to contact the cladding, fission gas release appeared to be slightly higher than demonstrated in conventional 75%SD fuel tests and axial growth was about the same as 75% SD fuel. There were axial positions in some of the fuel pins which showed evidence of fuel restructuring and an absence of fission products with low melting points and gaseous precursors (Cs and Rb). A model to investigate whether these areas may have overheated due to a loss of bond sodium indicates that it is a possible explanation for the fuel restructuring and something to be considered for fuel performance modeling of low SD fuel.

  15. Development of materials and manufacturing technologies for Indian fast reactor programme

    Energy Technology Data Exchange (ETDEWEB)

    Raj, Baldev; Jayakumar, T.; Bhaduri, A.K.; Mandal, Sumantra [Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    2010-07-01

    Fast Breeder Reactors (FBRs) are vital towards meeting security and sustainability of energy for the growing economy of India. The development of FBRs necessitates extensive research and development in domains of materials and manufacturing technologies in association with a wide spectrum of disciplines and their inter-twining to meet the challenging technology. The paper highlight the work and the approaches adopted for the successful deployment of materials, manufacturing and inspection technologies for the in-core and structural components of current and future Indian Fast Breeder Reactor Programme. Indigenous development of in-core materials viz. Titanium modified austenitic stainless steel (Alloy D9) and its variants, ferritic/martensitic oxide-dispersion strengthened (ODS) steels as well as structural materials viz. 316L(N) stainless steel and modified 9Cr-1Mo have been achieved through synergistic interactions between Indira Gandhi Centre for Atomic Research (IGCAR), education and research institutes and industries. Robust manufacturing technology has been established for forming and joining of various components of 500 MWe Prototype Fast Breeder Reactor (PFBR) through 'science-based technology' approach. To achieve the strict quality standards of formed parts in terms of geometrical tolerances, residual stresses and microstructural defects, FEM-based modelling and experimental validation was carried out for estimation of spring-back during forming of multiple curvature thick plantes. Optimization of grain boundary character distribution in Alloy D9 was carried out by adopting the grain boundary engineering approach to reduce radiation induced segregation. Extensive welding is involved in the fabrication of reactor vessels, piping, steam generators, fuel sub-assemblies etc. Activated Tungsten Inert Gas Welding process along with activated flux developed at IGCAR has been successfully used in fabrication of dummy fuel subassemblies (DFSA) required

  16. Remote Reactor Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Adam [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dazeley, Steve [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dobie, Doug [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Marleau, Peter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brennan, Jim [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gerling, Mark [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sumner, Matthew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sweany, Melinda [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-21

    The overall goal of the WATCHMAN project is to experimentally demonstrate the potential of water Cerenkov antineutrino detectors as a tool for remote monitoring of nuclear reactors. In particular, the project seeks to field a large prototype gadolinium-doped, water-based antineutrino detector to demonstrate sensitivity to a power reactor at ~10 kilometer standoff using a kiloton scale detector. The technology under development, when fully realized at large scale, could provide remote near-real-time information about reactor existence and operational status for small operating nuclear reactors out to distances of many hundreds of kilometers.

  17. Determination of the Clean Air Delivery Rate (CADR) of Photocatalytic Oxidation (PCO) Purifiers for Indoor Air Pollutants Using a Closed-Loop Reactor. Part II: Experimental Results.

    Science.gov (United States)

    Héquet, Valérie; Batault, Frédéric; Raillard, Cécile; Thévenet, Frédéric; Le Coq, Laurence; Dumont, Éric

    2017-03-06

    The performances of a laboratory PhotoCatalytic Oxidation (PCO) device were determined using a recirculation closed-loop pilot reactor. The closed-loop system was modeled by associating equations related to two ideal reactors: a perfectly mixed reservoir with a volume of VR = 0.42 m³ and a plug flow system corresponding to the PCO device with a volume of VP = 5.6 × 10-3 m³. The PCO device was composed of a pleated photocatalytic filter (1100 cm²) and two 18-W UVA fluorescent tubes. The Clean Air Delivery Rate (CADR) of the apparatus was measured under different operating conditions. The influence of three operating parameters was investigated: (i) light irradiance I from 0.10 to 2.0 mW·cm-2; (ii) air velocity v from 0.2 to 1.9 m·s-1; and (iii) initial toluene concentration C₀ (200, 600, 1000 and 4700 ppbv). The results showed that the conditions needed to apply a first-order decay model to the experimental data (described in Part I) were fulfilled. The CADR values, ranging from 0.35 to 3.95 m³·h-1, were mainly dependent on the light irradiance intensity. A square root influence of the light irradiance was observed. Although the CADR of the PCO device inserted in the closed-loop reactor did not theoretically depend on the flow rate (see Part I), the experimental results did not enable the confirmation of this prediction. The initial concentration was also a parameter influencing the CADR, as well as the toluene degradation rate. The maximum degradation rate rmax ranged from 342 to 4894 ppbv/h. Finally, this study evidenced that a recirculation closed-loop pilot could be used to develop a reliable standard test method to assess the effectiveness of PCO devices.

  18. Determination of the Clean Air Delivery Rate (CADR of Photocatalytic Oxidation (PCO Purifiers for Indoor Air Pollutants Using a Closed-Loop Reactor. Part II: Experimental Results

    Directory of Open Access Journals (Sweden)

    Valérie Héquet

    2017-03-01

    Full Text Available The performances of a laboratory PhotoCatalytic Oxidation (PCO device were determined using a recirculation closed-loop pilot reactor. The closed-loop system was modeled by associating equations related to two ideal reactors: a perfectly mixed reservoir with a volume of VR = 0.42 m3 and a plug flow system corresponding to the PCO device with a volume of VP = 5.6 × 10−3 m3. The PCO device was composed of a pleated photocatalytic filter (1100 cm2 and two 18-W UVA fluorescent tubes. The Clean Air Delivery Rate (CADR of the apparatus was measured under different operating conditions. The influence of three operating parameters was investigated: (i light irradiance I from 0.10 to 2.0 mW·cm−2; (ii air velocity v from 0.2 to 1.9 m·s−1; and (iii initial toluene concentration C0 (200, 600, 1000 and 4700 ppbv. The results showed that the conditions needed to apply a first-order decay model to the experimental data (described in Part I were fulfilled. The CADR values, ranging from 0.35 to 3.95 m3·h−1, were mainly dependent on the light irradiance intensity. A square root influence of the light irradiance was observed. Although the CADR of the PCO device inserted in the closed-loop reactor did not theoretically depend on the flow rate (see Part I, the experimental results did not enable the confirmation of this prediction. The initial concentration was also a parameter influencing the CADR, as well as the toluene degradation rate. The maximum degradation rate rmax ranged from 342 to 4894 ppbv/h. Finally, this study evidenced that a recirculation closed-loop pilot could be used to develop a reliable standard test method to assess the effectiveness of PCO devices.

  19. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    DEFF Research Database (Denmark)

    Riber, Anja Brinch; Jong, Ingrid de; van de Werd, Heleen A.

    2017-01-01

    of environmental enrichment for broiler breeders, which have been described in the scientific literature, on behavior and welfare. Environmental enrichment is defined as an improvement of the environment of captive animals, which increases the behavioral opportunities of the animal and leads to improvements...... in biological function. This definition has been broadened to include practical and economic aspects as any enrichment strategy that adversely affects the health of animals (e.g., environmental hygiene), or that has too many economic or practical constraints will never be implemented on commercial farms...... and thus never benefit animals. Environmental enrichment for broiler breeders often has the purpose of satisfying the behavioral motivations for feeding and foraging, resting, and/or encouraging normal sexual behavior. Potentially successful enrichments for broiler breeders are elevated resting places...

  20. Experimental research on molten salt thermofluid technology using a high-temperature molten salt loop applied for a fusion reactor Flibe blanket

    Energy Technology Data Exchange (ETDEWEB)

    Toda, Saburo; Chiba, Shinya E-mail: schiba@karma.qse.tohoku.ac.jp; Yuki, Kazuhisa; Omae, Masahiro; Sagara, Akio

    2002-12-01

    Experimental research on molten salt thermofluid technology using a high-temperature molten salt loop (MSL) is described in this paper. The MSL was designed to be able to use Flibe as a coolant, however, a simulant, heat transfer salt (HTS) has to be used alternatively since Flibe is difficult to operate under avoiding a biohazard of Be. Experiment on heat-transfer enhancement, that is required for applying to cool the high heat flux components of fusion reactors, is ongoing. Preliminary experimental results showed that an internal structure of a mixing chamber in the MSL was important to obtain accurate bulk temperatures under severe thermal conditions. For operating the loop, careful handling are needed to proceed how to melt the salt and to circulate it in starting the operation of the MSL. It is concluded that several improvements proposed from the present experiences should be applied for the future Flibe operation.

  1. H Reactor

    Data.gov (United States)

    Federal Laboratory Consortium — The H Reactor was the first reactor to be built at Hanford after World War II.It became operational in October of 1949, and represented the fourth nuclear reactor on...

  2. Toward a Mechanistic Source Term in Advanced Reactors: A Review of Past U.S. SFR Incidents, Experiments, and Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Bucknor, Matthew; Brunett, Acacia J.; Grabaskas, David

    2016-04-17

    In 2015, as part of a Regulatory Technology Development Plan (RTDP) effort for sodium-cooled fast reactors (SFRs), Argonne National Laboratory investigated the current state of knowledge of source term development for a metal-fueled, pool-type SFR. This paper provides a summary of past domestic metal-fueled SFR incidents and experiments and highlights information relevant to source term estimations that were gathered as part of the RTDP effort. The incidents described in this paper include fuel pin failures at the Sodium Reactor Experiment (SRE) facility in July of 1959, the Fermi I meltdown that occurred in October of 1966, and the repeated melting of a fuel element within an experimental capsule at the Experimental Breeder Reactor II (EBR-II) from November 1967 to May 1968. The experiments described in this paper include the Run-Beyond-Cladding-Breach tests that were performed at EBR-II in 1985 and a series of severe transient overpower tests conducted at the Transient Reactor Test Facility (TREAT) in the mid-1980s.

  3. Argonne Liquid-Metal Advanced Burner Reactor : components and in-vessel system thermal-hydraulic research and testing experience - pathway forward.

    Energy Technology Data Exchange (ETDEWEB)

    Kasza, K.; Grandy, C.; Chang, Y.; Khalil, H.; Nuclear Engineering Division

    2007-06-30

    This white paper provides an overview and status report of the thermal-hydraulic nuclear research and development, both experimental and computational, conducted predominantly at Argonne National Laboratory. Argonne from the early 1970s through the early 1990s was the Department of Energy's (DOE's) lead lab for thermal-hydraulic development of Liquid Metal Reactors (LMRs). During the 1970s and into the mid-1980s, Argonne conducted thermal-hydraulic studies and experiments on individual reactor components supporting the Experimental Breeder Reactor-II (EBR-II), Fast Flux Test Facility (FFTF), and the Clinch River Breeder Reactor (CRBR). From the mid-1980s and into the early 1990s, Argonne conducted studies on phenomena related to forced- and natural-convection thermal buoyancy in complete in-vessel models of the General Electric (GE) Prototype Reactor Inherently Safe Module (PRISM) and Rockwell International (RI) Sodium Advanced Fast Reactor (SAFR). These two reactor initiatives involved Argonne working closely with U.S. industry and DOE. This paper describes the very important impact of thermal hydraulics dominated by thermal buoyancy forces on reactor global operation and on the behavior/performance of individual components during postulated off-normal accident events with low flow. Utilizing Argonne's LMR expertise and design knowledge is vital to the further development of safe, reliable, and high-performance LMRs. Argonne believes there remains an important need for continued research and development on thermal-hydraulic design in support of DOE's and the international community's renewed thrust for developing and demonstrating the Global Nuclear Energy Partnership (GNEP) reactor(s) and the associated Argonne Liquid Metal-Advanced Burner Reactor (LM-ABR). This white paper highlights that further understanding is needed regarding reactor design under coolant low-flow events. These safety-related events are associated with the transition

  4. Prevalence of Campylobacter jejuni in poultry breeder flocks

    Directory of Open Access Journals (Sweden)

    Ludovico Dipineto

    2010-01-01

    Full Text Available The aim of this work is to present the preliminary results of a study about the prevalence of Campylobacter jejuni in poultry breeder flocks. It was examined three different breeder flocks of Bojano in Molise region. A total of 360 cloacal swabs and 80 enviromental swabs was collected. Of the 3 flocks studied, 6.9% tested were positive for Campylobacter spp. The most-prevalent isolated species is C. jejuni (8.2%. Only 3 of the 360 cloacal swabs samples examined were associated with C. coli. The environmental swabs resulted negative. This results confirms again that poultry is a reservoir of this germ.

  5. Application OF LIBS To Estimate The Age Of Broiler Breeders

    Science.gov (United States)

    Salam, Z. Abdel; Harith, M. A.

    2011-09-01

    Laser Induced Breakdown Spectroscopy (LIBS) is a well-known spectrochemical elemental analysis technique. In our investigations of the LIBS spectra it has been found that there is a remarkable correlation between the ionic to atomic spectral lines emission ratio and the surface hardness of eggshell for two Different Broiler Breeder at different age. The proposed technique has been applied successfully in poultry science to estimate the age of broiler breeders by measuring the surface hardness of their eggshell. The experiments have been performed on two different strains, Arbor Acres plus (AAP) and Hubard Classic (HC), and the results were satisfactory.

  6. Simulation and design of an electron beam ion source charge breeder for the californium rare isotope breeder upgrade

    Directory of Open Access Journals (Sweden)

    Clayton Dickerson

    2013-02-01

    Full Text Available An electron beam ion source (EBIS will be constructed and used to charge breed ions from the californium rare isotope breeder upgrade (CARIBU for postacceleration into the Argonne tandem linear accelerator system (ATLAS. Simulations of the EBIS charge breeder performance and the related ion transport systems are reported. Propagation of the electron beam through the EBIS was verified, and the anticipated incident power density within the electron collector was identified. The full normalized acceptance of the charge breeder with a 2 A electron beam, 0.024π  mm mrad for nominal operating parameters, was determined by simulating ion injection into the EBIS. The optics of the ion transport lines were carefully optimized to achieve well-matched ion injection, to minimize emittance growth of the injected and extracted ion beams, and to enable adequate testing of the charge bred ions prior to installation in ATLAS.

  7. Development of Flow-Through Polymeric Membrane Reactor for Liquid Phase Reactions: Experimental Investigation and Mathematical Modeling

    Directory of Open Access Journals (Sweden)

    Endalkachew Chanie Mengistie

    2017-01-01

    Full Text Available Incorporating metal nanoparticles into polymer membranes can endow the membranes with additional functions. This work explores the development of catalytic polymer membrane through synthesis of palladium nanoparticles based on the approaches of intermatrix synthesis (IMS inside surface functionalized polyethersulfone (PES membrane and its application to liquid phase reactions. Flat sheet PES membranes have been successfully modified via UV-induced graft polymerization of acrylic acid monomer. Palladium nanoparticles have been synthesized by chemical reduction of palladium precursor loaded on surface modified membranes, an approach to the design of membranes modified with nanomaterials. The catalytic performances of the nanoparticle incorporated membranes have been evaluated by the liquid phase reduction of p-nitrophenol using NaBH4 as a reductant in flow-through membrane reactor configuration. The nanocomposite membranes containing palladium nanoparticles were catalytically efficient in achieving a nearly 100% conversion and the conversion was found to be dependent on the flux, amount of catalyst, and initial concentration of nitrophenol. The proposed mathematical model equation represents satisfactorily the reaction and transport phenomena in flow-through catalytic membrane reactor.

  8. Development of Safety Analysis Codes and Experimental Validation for a Very High Temperature Gas-Cooled Reactor - FY-05 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Chang Oh

    2005-09-01

    The very high temperature gas-cooled reactors (VHTGRs) are those concepts that have average coolant temperatures above 9000C or operational fuel temperatures above 12500C. These concepts provide the potential for increased energy conversion efficiency and for high-temperature process heat application in addition to power generation and nuclear hydrogen generation. While all the High Temperature Gas Cooled Reactor (HTGR) concepts have sufficiently high temperatures to support process heat applications, such as desalination and cogeneration, the VHTGR’s higher temperatures are suitable for particular applications such as thermochemical hydrogen production. However, the high temperature operation can be detrimental to safety following a loss-of-coolant accident (LOCA) initiated by pipe breaks caused by seismic or other events. Following the loss of coolant through the break and coolant depressurization, air from the containment will enter the core by molecular diffusion and ultimately by natural convection, leading to oxidation of the in-core graphite structures and fuel. The oxidation will release heat and accelerate the heatup of the reactor core. Thus, without any effective countermeasures, a pipe break may lead to significant fuel damage and fission product release. The Idaho National Laboratory (INL) has investigated this event for the past three years for the HTGR. However, the computer codes used, and in fact none of the world’s computer codes, have been sufficiently developed and validated to reliably predict this event. New code development, improvement of the existing codes, and experimental validation are imperative to narrow the uncertainty in the predictions of this type of accident. The objectives of this Korean/United States collaboration are to develop advanced computational methods for VHTGR safety analysis codes and to validate these computer codes.

  9. APPLICATIONS OF LASERS AND OTHER TOPICS IN LASER PHYSICS AND TECHNOLOGY: Hybrid reactor based on laser thermonuclear fusion

    Science.gov (United States)

    Basov, N. G.; Belousov, N. I.; Grishunin, P. A.; Kalmykov, Yu K.; Lebo, I. G.; Rozanov, Vladislav B.; Sklizkov, G. V.; Subbotin, V. I.; Finkel'shteĭn, K. I.; Kharitonov, V. V.; Sherstnev, K. B.

    1987-10-01

    A physicotechnical and parametric analysis is used as the basis for a conceptual design of a thermonuclear inertial-confinement hybrid reactor as a breeder of fuel for fission nuclear power stations. It is proposed to use a laser as a driver in this reactor.

  10. Experimental and modeling study of the effect of CO and H2 on the urea DeNO(x) process in a 150kW laboratory reactor.

    Science.gov (United States)

    Javed, M Tayyeb; Nimmo, W; Gibbs, B M

    2008-01-01

    An experimental and modeling investigation has been performed to study the effect of process additives, H2 and CO on NO(x) removal from flue gases by a selective non-catalytic reduction process using urea as a reducing agent. Experiments were performed with a flow reactor in which flue gas was generated by the combustion of propane in air at 3% excess oxygen and the desired levels of initial NO(x) (500ppm) were achieved by doping the flame with ammonia. Experiments were performed throughout the temperature range of interest, i.e. from 850 to 1200 degrees C for investigation of the effects of the process additives on the performance of aqueous urea DeNO(x). Subsequently, computational kinetic modeling with SENKIN code was performed to analyze the performance of urea providing a direct comparison of modeling prediction with experimental measurements. With CO addition, a downwards shift of 215 degrees C in the peak reduction temperature from 1125 to 910 degrees C was observed during the experimentation while the kinetic modeling suggests it to be 150 degrees C, i.e. from 1020 to 870 degrees C. The addition of H2 impairs the peak NO(x) reduction but suggests a low temperature application of the process. A downward shift of 250 degrees C in the peak reduction temperature, from 1020 to 770 degrees C, was observed during kinetic modeling studies. The kinetic modeling shows a good qualitative agreement with the experimental observations and reveals additional information about the process.

  11. Quantitative feed restriction of Pekin breeder ducks during the ...

    African Journals Online (AJOL)

    Quantitative feed restriction of Pekin breeder ducks during the rearing period and its effect on subsequent productivity. M.D. Olver. Animal and Dairy Science Research Institute, Irene. Six male and 24 female Pekin ducks per pen were randomly allocated to 12pens to test the effects of quantitative feed restriction during the ...

  12. Semen bacterial flora of Rhode Island Breeder cocks in Zaria ...

    African Journals Online (AJOL)

    The semen used in this study was collected from 77 Rhode Island Breeder cocks reared in battery cages under intensive management from a private farm in Zaria, Kaduna State, Nigeria using the back massage procedure, 27 of the 77 semen samples (35.1%) contained bacterial isolates. None of the samples grew fungi.

  13. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    NARCIS (Netherlands)

    Riber, Anja B.; Jong, de Ingrid; Weerd, van de Heleen A.; Steenfeldt, Sanna

    2017-01-01

    Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types of

  14. Impact of nutrition on welfare aspects of broiler breeder flocks

    NARCIS (Netherlands)

    Krimpen, van M.M.; Jong, de I.C.

    2014-01-01

    To ensure health and reproductive performance, broiler breeders are feed restricted during the rearing period and, to a lesser extent, during the production period. Although restricted feeding improves health and bird welfare, on the other hand the birds are chronically hungry and suffer from

  15. Feeding broiler breeder flocks in relation to bird welfare aspects

    NARCIS (Netherlands)

    Jong, de I.C.; Krimpen, van M.M.

    2011-01-01

    To ensure health and reproductive capacity of the birds, broiler breeders are fed restricted during the rearing period, and to a lesser extent also during the production period. Although restricted feeding improves health and thereby bird welfare, on the other hand the birds are chronically hungry

  16. Response of Japanese Breeder Quails to Varying Dietary Protein ...

    African Journals Online (AJOL)

    A three months feeding trial was conducted to assess the effects of feeding varying levels of dietary protein on productive performance, egg quality characteristics and hatchability using 930 six weeks breeders quails. The birds were randomly divided into five dietary treatment groups of 186 birds, and were further replicated ...

  17. Feeding broiler breeders to improve their welfare whilst maintaining productivity

    DEFF Research Database (Denmark)

    Steenfeldt, Sanna; Nielsen, Birte Lindstrøm

    of their litter may have affected their thermoregulation. This experiment indicates that high fibre diets can alleviate the feeling of hunger currently experienced by broiler breeders, and a high ratio of insoluble fibre can reduce stereotypies and may improve the well-being of the birds....

  18. Utilisation of synthetic amino acids by broiler breeder hens | Nonis ...

    African Journals Online (AJOL)

    This study was conducted to examine the response of broiler breeder hens to feeds supplemented with synthetic lysine and methionine when fed once or twice daily during peak production. Replacing intact protein with increasing amounts of free lysine and methionine, up to 2.3 g/kg feed, had no effect on feed intake, ...

  19. Vaccination Strategies in Breeder and Commercial Farms and ...

    African Journals Online (AJOL)

    In Nigeria infectious bursal disease (IBD) outbreaks have persisted despite routine vaccination. In a quest to determine some of the causes of the vaccination failures, the type of vaccines, vaccination schedules and seromonitoring for antibodies in breeder and commercial farms were investigated using structured ...

  20. Sequential Aeration of Membrane-Aerated Biofilm Reactors for High-Rate Autotrophic Nitrogen Removal: Experimental Demonstration

    DEFF Research Database (Denmark)

    Pellicer i Nàcher, Carles; Sun, Sheng-Peng; Lackner, Susanne

    2010-01-01

    One-stage autotrophic nitrogen (N) removal, requiring the simultaneous activity of aerobic and anaerobic ammonium oxidizing bacteria (AOB and AnAOB), can be obtained in spatially redox-stratified biofilms. However, previous experience with Membrane-Aerated Biofilm Reactors (MABRs) has revealed......S rRNA gene confirmed that sequential aeration, even at elevated average O2 loads, stimulated the abundance of AnAOB and AOB and prevented the increase in NOB. Nitrous oxide (N2O) emissions were 100-fold lower compared to other anaerobic ammonium oxidation (Anammox)-nitritation systems. Hence...... a difficulty in reducing the abundance and activity of nitrite oxidizing bacteria (NOB), which drastically lowers process efficiency. Here we show how sequential aeration is an effective strategy to attain autotrophic N removal in MABRs: Two separate MABRs, which displayed limited or no N removal under...

  1. Pilot Experimentation with Complete Mixing Anoxic Reactors to Improve Sewage Denitrification in Treatment Plants in Small Communities

    Directory of Open Access Journals (Sweden)

    Massimo Raboni

    2013-12-01

    Full Text Available This paper reports the results of two sewage treatment tests in a community of 15,000 inhabitants. The sewage treatment plant is subject to strong fluctuations in load (BOD5, COD, TKN, and in particular in the BOD5/TKN ratio. These fluctuations adversely affect the biological denitrification, as demonstrated by many pilot and real-scale plants. The plants we tested were subjected to two treatment types: anoxic-aerobic and simultaneous denitrification. Both processes are designed for complete mixing conditions in the reactors in order to level the fluctuations in the load and thus improve the denitrification efficiency. The results prove that an average denitrification efficiency of up to 80% can be achieved with the sludge loading close to 0.1 kg BOD5 (d∙kgMLVSS−1. The effect of the sludge loading and dissolved oxygen on the denitrification efficiency is highlighted.

  2. Fast neutron breeder reactor Rapsodie - situation of physics, hydraulic, thermal and dynamics studies and studies of stability early in 1963; Pile rapide rapsodie - point des etudes neutroniques, hydrauliques, thermiques et dynamiques et des etudes de stabilite au debut de l'annee 1963

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1964-07-01

    Early in 1963, it was necessary to make a choice among the two fuels examined for Rapsodie: the UPuMo alloy with double cladding, Nb and stainless steel, and the UO{sub 2}-PuO{sub 2} mix oxide. This report presents the results of the studies effected with the two types of fuel. We reconsider at first the different models which have been studied and we give a detailed description of the alloy and oxide cores as they are envisaged early in 1963. We give then the most important physics performances of the two cores: neutron flux and spectrum, reactivity of the compensation find safety rods, neutrons balance, specific power, effective fraction of delayed neutrons, lifetime of the prompt neutrons, reactivity coefficient. We describe the hydraulic studies and experiments which have been done concerning the two cores. We discuss the criteria adopted as basis for the flow calculations. We give the results of pressure drop and sub-assembly lifting, force measurements, and vibration and pin flow distribution experiments. We discuss the constants utilized for the thermal calculations and we give the temperatures of sodium and alloy or oxide fuel, the temperature increases due to the hot points, and the limitation of the oxide fuel burn-up, originated by the pressure of the fission gases. We treat the hypotheses having been utilized for the dynamics calculations and we describe the different accidents which have been studied. We give the results of the calculations for every accident and each fuel, and we show fuel melting or sodium boiling can be avoided, even in case of the most pessimistic hypotheses, by modifying reactor characteristics (shim-rod reactivity or power of the reactor with only one cooling circuit). The reactor stability has been evaluated with the hypotheses utilized for the dynamics calculations, except of the Doppler coefficient which was intentionally increased. We show that the alloy and oxide cores are stable for every envisaged reactor power. (authors

  3. Defluoridation of drinking water using a new flow column-electrocoagulation reactor (FCER) - Experimental, statistical, and economic approach.

    Science.gov (United States)

    Hashim, Khalid S; Shaw, Andy; Al Khaddar, Rafid; Ortoneda Pedrola, Montserrat; Phipps, David

    2017-07-15

    A new batch, flow column electrocoagulation reactor (FCER) that utilises a perforated plate flow column as a mixer has been used to remove fluoride from drinking water. A comprehensive study has been carried out to assess its performance. The efficiency of fluoride removal (R%) as a function of key operational parameters such as initial pH, detention time (t), current density (CD), inter-electrode distance (ID) and initial concentration (C 0 ) has been examined and an empirical model has been developed. A scanning electron microscopy (SEM) investigation of the influence of the EC process on morphology of the surface of the aluminium electrodes, showed the erosion caused by aluminium loss. A preliminary estimation of the reactor's operating cost is suggested, allowing for the energy from recycling of hydrogen gas hydrogen gas produced amount. The results obtained showed that 98% of fluoride was removed within 25 min of electrolysis at pH of 6, ID of 5 mm, and CD of 2 mA/cm 2 . The general relationship between fluoride removal and operating parameters could be described by a linear model with R 2 of 0.823. The contribution of the operating parameters to the suggested model followed the order: t > CD > C 0  > ID > pH. The SEM images obtained showed that, after the EC process, the surface of the anodes, became non-uniform with a large number of irregularities due to the generation of aluminium hydroxides. It is suggested that these do not materially affect the performance. A provisional estimate of the operating cost was 0.379 US $/m 3 . Additionally, it has been found that 0.6 kW/m 3 is potentially recoverable from the H 2 gas. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  4. Development of BWR regional stability experimental facility SIRIUS-F, which simulates thermal-hydraulics-neutronics coupling in reactor core, and stability evaluation of ABWR

    Energy Technology Data Exchange (ETDEWEB)

    Masahiro Furuya; Fumio Inada [Central Research Institute of Electric Power Industry (CRIEPI) 2-11-1 Iwado-kita, Komae, Tokyo 201-8511 (Japan); Takanori Fukahori [Global Nuclear Fuel Japan (GNF-J) 2-3-1 Uchikawa, Yokosuka, Kanagawa 239-0836 (Japan); Shinya Mizokami [Tokyo Electric Power Company (TEPCO) 1-1-3 Uchisaiwai-cho, Chiyoda, Tokyo 100-0011 (Japan)

    2005-07-01

    Full text of publication follows: The SIRIUS-F facility was designed and constructed for highly accurate simulation of channel, core-wide and regional instabilities of an ABWR. A real-time simulation is performed for the modal-point kinetics of reactor neutronics and fuel-rod conduction on the basis of a measured void fraction in a reactor core section of the facility. A noise analysis method was performed to calculate decay ratios from dominant poles of transfer function on the basis of the AR method by applying time series of a core inlet flow rate. By utilizing this method, one can estimate stability at any specific operating point online without assuming excess conservative conditions. Channel and regional stability experiments were conducted for a wide range of operating conditions including maximum power points along the minimum pump speed line and the natural circulation line of the ABWR. The decay ratios and the resonance frequencies are in good agreement with those from the design analysis code, ODYSY. The SIRIUS-F experimental results demonstrated stability characteristics such as a stabilizing effect of the power, and reviled a sufficiently large stability margin even under hypothetical conditions of power enlargement. (authors)

  5. Experimental study and nuclear model calculations on the 192Os(p,n)192Ir reaction: Comparison of reactor and cyclotron production of the therapeutic radionuclide 192Ir.

    Science.gov (United States)

    Hilgers, K; Sudár, S; Qaim, S M

    2005-07-01

    In a search for an alternative route of production of the important therapeutic radionuclide (192)Ir (T(1/2)=78.83 d), the excitation function of the reaction (192)Os(p,n)(192)Ir was investigated from its threshold up to 20 MeV. Thin samples of enriched (192)Os were obtained by electrodeposition on Ni, and the conventional stacked-foil technique was used for cross section measurements. The experimental data were compared with the results of theoretical calculations using the codes EMPIRE-II and ALICE-IPPE. Good agreement was found with EMPIRE-II, but slightly less with the ALICE-IPPE calculations. The theoretical thick target yield of (192)Ir over the energy range E(p)=16-->8 MeV amounts to only 0.16MBq/muA.h. A comparison of the reactor and cyclotron production methods is given. In terms of yield and radionuclidic purity of (192)Ir the reactor method appears to be superior; the only advantage of the cyclotron method could be the higher specific activity of the product.

  6. Experimental study and nuclear model calculations on the $^{192}Os (p, n)^{192}$Ir reaction Comparison of reactor and cyclotron production of the therapeutic radionuclide $^{192}$Ir

    CERN Document Server

    Hilgers, K; Sudar, S; 10.1016/j.apradiso.2004.12.010

    2005-01-01

    In a search for an alternative route of production of the important therapeutic radionuclide /sup 192/Ir (T/sub 1/2/=78.83 d), the excitation function of the reaction /sup 192/Os(p, n)/sup 192/Ir was investigated from its threshold up to 20MeV. Thin samples of enriched /sup 192/Os were obtained by electrodeposition on Ni, and the conventional stacked-foil technique was used for cross section measurements. The experimental data were compared with the results of theoretical calculations using the codes EMPIRE-II and ALICE-IPPE. Good agreement was found with EMPIRE-II, but slightly less with the ALICE-IPPE calculations. The theoretical thick target yield of /sup 192/Ir over the energy range E/sub p/=16 to 8MeV amounts to only 0.16MBq/ mu A.h. A comparison of the reactor and cyclotron production methods is given. In terms of yield and radionuclidic purity of /sup 192/Ir the reactor method appears to be superior; the only advantage of the cyclotron method could be the higher specific activity of the product.

  7. Studies on serum macro and micro minerals status in repeat breeder ...

    African Journals Online (AJOL)

    ... 87%; whereas in repeat breeder control buffaloes, the overall pregnancy rate was 21%. In conclusion, the concentrations of macro and micro minerals were significantly lower in repeat breeder buffaloes and mineral mixtures should be added in the food stuff to improve reproductive efficiency of repeat breeder buffaloes.

  8. Economic and welfare benefits of environmental enrichment for broiler breeders.

    Science.gov (United States)

    Leone, E H; Estévez, I

    2008-01-01

    Designs to enrich the environment are crucial in the effort to fully address the biological needs of domestic animals. Although enrichment programs have been shown to improve health and welfare, little is known of their potential for application to commercial broiler breeder environments. We investigated the potential benefits of cover panels for broiler breeder reproductive performance in a commercial setting. This demonstration trial occurred on 5 commercial broiler breeder farms, each with a control and panel treatment room containing approximately 7,000 females and 800 males. Reproductive performance was measured from 25 to 60 wk by the number of eggs laid per female per week as well as weekly fertility and hatchability rates. The location of marked males was recorded weekly to quantify male movement. Access to cover panels improved egg production by 2.1% and maintained better hatchability and fertility throughout the breeding cycle (significant interactions of age and panel treatment) leading to an additional 4.5 chicks/female. Male home ranges, based on minimum convex polygons, were larger in the enriched (259 +/- 24.4 m(2)) vs. control flocks (184 +/- 23.1 m(2)). Providing enrichment in the form of cover panels improved reproductive performance, most likely by increasing males' mating opportunities and reducing female stress. We found a clear economic benefit to providing enrichment, an estimated $3 million if all breeder houses within the participating company were outfitted with the panels. These results demonstrate that environmental enrichment is not only beneficial for broiler breeder welfare, but can also be economically advantageous, resulting in a win-win situation for poultry welfare and production.

  9. Experimental and numerical investigation of gas/liquid phase boundaries representing the reference level for hydrostatic level measurements in boiling water reactors; Experimentelle und numerische Untersuchung von Gas/Liquid-Phasengrenzflaechen als Referenzwert fuer die hydrostatische Fuellstandsmessung in Siedewasserreaktoren

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, Stephan

    2013-12-17

    The experimental and numerical investigation of gas/liquid phase boundaries representing the reference level for hydrostatic level measurements in boiling water reactors is considered as relevant for reactor safety research. The experiments allow a quantification of the transition processes in hydrostatic level measurement devices that were up to now only assessed by phenomenological descriptions. Experimental studies covered the topology and stability of water/vapor phase boundaries and the numerical description using CFD codes, including modeling of the surface topology and modeling of the heat and mass transport.

  10. Reactor Safety Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Edler, S. K.

    1981-07-01

    This document summarizes the work performed by Pacific Northwest Laboratory (PNL) from January 1 through March 31, 1981, for the Division of Reactor Safety Research within the U.S. Nuclear Regulatory Commission (NRC). Evaluations of nondestructive examination (NDE) techniques and instrumentation are reported; areas of investigation include demonstrating the feasibility of determining the strength of structural graphite, evaluating the feasibility of detecting and analyzing flaw growth in reactor pressure boundary systems, examining NDE reliability and probabilistic fracture mechanics, and assessing the integrity of pressurized water reactor (PWR) steam generator tubes where service-induced degradation has been indicated. Experimental data and analytical models are being provided to aid in decision-making regarding pipeto- pipe impacts following postulated breaks in high-energy fluid system piping. Core thermal models are being developed to provide better digital codes to compute the behavior of full-scale reactor systems under postulated accident conditions. Fuel assemblies and analytical support are being provided for experimental programs at other facilities. These programs include loss-ofcoolant accident (LOCA) simulation tests at the NRU reactor, Chalk River, Canada; fuel rod deformation, severe fuel damage, and postaccident coolability tests for the ESSOR reactor Super Sara Test Program, Ispra, Italy; the instrumented fuel assembly irradiation program at Halden, Norway; and experimental programs at the Power Burst Facility, Idaho National Engineering Laboratory (INEL). These programs will provide data for computer modeling of reactor system and fuel performance during various abnormal operating conditions.

  11. Dietary influence of digestible lysine concentration on Cobb 500 hen broiler breeder reproductive performance.

    Science.gov (United States)

    Mejia, L; McDaniel, C D; Corzo, A

    2012-02-01

    A study was conducted to examine the reproductive parameters of Cobb 500 broiler breeder hens fed 2 different types of diets varying in digestible lysine concentration. In total, 240 Cobb 500 broiler breeder pullets were placed in individual cages and given experimental diets from 35 to 45 wk of age. Treatments 1 and 2 were diets formulated using only commercially available feed ingredients and consisted of digestible lysine intakes of 1,200 (IDL) and 1,010 mg/hen per day (ID). Treatments 3 and 4 consisted of semipurified diets with the inclusion of l-glutamic acid to maintain isonitrogenous conditions with digestible lysine intakes of 1,010 (SPL) and 600 mg/hen per day (SP). Hens fed the SPL and SP diets had lower hen-day egg production than hens fed the ID diet, with hens receiving the IDL diet yielding intermediate values. Hens fed the SP diet had the lowest (P < 0.05) egg weight, but no differences were observed among dietary treatments for egg specific gravity. Fertility and hatchability of eggs set were lowest (P < 0.05) for hens fed the SPL dietary treatment. No differences were observed for early and middle embryonic mortality, contaminated, or pipped eggs. Late embryonic mortality was observed to be higher (P < 0.05) in hens fed the SP diet. A decrease in the daily intake of digestible lysine appeared to improve broiler breeder reproductive performance when hens were fed a semipurified diet. In contrast, the same effect was not observed when hens were fed a standard industry-type diet that contained less lysine.

  12. Investigation of ion capture in an electron beam ion trap charge-breeder for rare isotopes

    Science.gov (United States)

    Kittimanapun, Kritsada

    Charge breeding of rare isotope ions has become an important ingredient for providing reaccelerated rare isotope beams for science. At the National Superconducting Cyclotron Laboratory (NSCL), a reaccelerator, ReA, has been built that employs an advanced Electron Beam Ion Trap (EBIT) as a charge breeder. ReA will provide rare-isotope beams with energies of a few hundred keV/u up to tens of MeV/u to enable the study of properties of rare isotopes via low energy Coulomb excitation and transfer reactions, and to investigate nuclear reactions important for nuclear astrophysics. ReA consists of an EBIT charge breeder, a charge-over-mass selector, a room temperature radio-frequency quadrupole accelerator, and a superconducting radio-frequency linear accelerator. The EBIT charge breeder features a high-current electron gun, a long trap structure, and a hybrid superconducting magnet to reach both high acceptance for injected low-charge ions as well as high-electron beam current densities for fast charge breeding. In this work, continuous ion injection and capture in the EBIT have been investigated with a dedicated Monte-Carlo simulation code and in experimental studies. The Monte-Carlo code NEBIT considers the electron-impact ionization cross sections, space charge due to the electron beam current, ion dynamics, electric field from electrodes, and magnetic field from the superconducting magnet. Experiments were performed to study the capture efficiency as a function of injected ion beam current, electron beam current, trap size, and trap potential depth. The charge state evolution of trapped ions was studied, providing information about the effective current density of the electron beam inside the EBIT. An attempt was made to measure the effective space-charge potential of the electron beam by studying the dynamics of a beam injected and reflected inside the trap.

  13. Catalytic membrane reactor for tritium extraction system from He purge

    Energy Technology Data Exchange (ETDEWEB)

    Santucci, Alessia, E-mail: alessia.santucci@enea.it [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy); Incelli, Marco [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy); DEIM, University of Tuscia, Via del Paradiso 47, 01100 Viterbo (Italy); Sansovini, Mirko; Tosti, Silvano [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy)

    2016-11-01

    Highlights: • In the HCBB blanket, the produced tritium is recovered by purging with helium; membrane technologies are able to separate tritium from helium. • The paper presents the results of two experimental campaigns. • In the first, a Pd–Ag diffuser for hydrogen separation is tested at several operating conditions. • In the second, the ability of a Pd–Ag membrane reactor for water decontamination is assessed by performing isotopic swamping and water gas shift reactions. - Abstract: In the Helium Cooled Pebble Bed (HCPB) blanket concept, the produced tritium is recovered purging the breeder with helium at low pressure, thus a tritium extraction system (TES) is foreseen to separate the produced tritium (which contains impurities like water) from the helium gas purge. Several R&D activities are running in parallel to experimentally identify most promising TES technologies: particularly, Pd-based membrane reactors (MR) are under investigation because of their large hydrogen selectivity, continuous operation capability, reliability and compactness. The construction and operation under DEMO relevant conditions (that presently foresee a He purge flow rate of about 10,000 Nm{sup 3}/h and a H{sub 2}/He ratio of 0.1%) of a medium scale MR is scheduled for next year, while presently preliminary experiments on a small scale reactor are performed to identify most suitable operative conditions and catalyst materials. This work presents the results of an experimental campaign carried out on a Pd-based membrane aimed at measuring the capability of this device in separating hydrogen from the helium. Many operative conditions have been investigated by considering different He/H{sub 2} feed flow ratios, several lumen pressures and reactor temperatures. Moreover, the performances of a membrane reactor (composed of a Pd–Ag tube having a wall thickness of about 113 μm, length 500 mm and diameter 10 mm) in processing the water contained in the purge gas have been

  14. Experimental and numerical investigation of coolant mixing in a model of reactor pressure vessel down-comer and in cold leg inlets

    Directory of Open Access Journals (Sweden)

    Hutli Ezddin

    2017-01-01

    Full Text Available Thermal fatigue and pressurized thermal shock phenomena are the main problems for the reactor pressure vessel and the T-junctions both of them depend on the mixing of the coolant. The mixing process, flow and temperature distribution has been investigated experimentally using particle image velocimetry, laser induced fluorescence, and simulated by CFD tools. The obtained results showed that the ratio of flow rate between the main pipe and the branch pipe has a big influence on the mixing process. The particle image velocimetry/planar laser-induced fluorescence measurements technologies proved to be suitable for the investigation of turbulent mixing in the complicated flow system: both velocity and temperature distribution are important parameters in the determination of thermal fatigue and pressurized thermal shock. Results of the applied these techniques showed that both of them can be used as a good provider for data base and to validate CFD results.

  15. Vitamin and trace mineral content in feed of breeders and their progeny: effects of growth, feed conversion and severity of malabsorption syndrome of broilers

    NARCIS (Netherlands)

    Rebel, J.M.J.; Dam, van J.T.P.; Zekarias, B.; Balk, F.R.M.; Post, J.; Minambres, A.F.; Huurne, ter A.A.H.M.

    2004-01-01

    1. A study was conducted to investigate the effects of several vitamins and trace elements supplemented to basal breeder and broiler feed to the immune system. Effects were tested in control chickens and in chickens experimentally infected with malabsorption syndrome (MAS). 2. Vitamins and trace

  16. Updated neutronics analyses of a water cooled ceramic breeder blanket for the CFETR

    Science.gov (United States)

    Xiaokang, ZHANG; Songlin, LIU; Xia, LI; Qingjun, ZHU; Jia, LI

    2017-11-01

    The water cooled ceramic breeder (WCCB) blanket employing pressurized water as a coolant is one of the breeding blanket candidates for the China Fusion Engineering Test Reactor (CFETR). Some updating of neutronics analyses was needed, because there were changes in the neutronics performance of the blanket as several significant modifications and improvements have been adopted for the WCCB blanket, including the optimization of radial build-up and customized structure for each blanket module. A 22.5 degree toroidal symmetrical torus sector 3D neutronics model containing the updated design of the WCCB blanket modules was developed for the neutronics analyses. The tritium breeding capability, nuclear heating power, radiation damage, and decay heat were calculated by the MCNP and FISPACT code. The results show that the packing factor and 6Li enrichment of the breeder should both be no less than 0.8 to ensure tritium self-sufficiency. The nuclear heating power of the blanket under 200 MW fusion power reaches 201.23 MW. The displacement per atom per full power year (FPY) of the plasma-facing component and first wall reach 0.90 and 2.60, respectively. The peak H production rate reaches 150.79 appm/FPY and the peak He production reaches 29.09 appm/FPY in blanket module #3. The total decay heat of the blanket modules is 2.64 MW at 1 s after shutdown and the average decay heat density can reach 11.09 kW m-3 at that time. The decay heat density of the blanket modules slowly decreases to lower than 10 W m-3 in more than ten years.

  17. Optimization of mass-production conditions for tritium breeder pebbles based on slurry droplet wetting method

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yi-Hyun, E-mail: yhpark@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Min, Kyung-Mi; Ahn, Mu-Young; Cho, Seungyon; Lee, Young-Min [National Fusion Research Institute, Daejeon (Korea, Republic of); Park, Sang-Jin; Danish, Rehan; Lim, Chul-Hwan; Jo, Yong-Dae [IVT Co., Ltd., Daegu (Korea, Republic of)

    2016-11-01

    Highlights: • An automatic dispensing system was developed to improve uniformity and production rate of breeder pebbles. • The production rate of this system for Li{sub 2}TiO{sub 3} pebble was estimated at 50 kg/year. • The optimization of dispensing and sintering conditions for the mass-production of Li{sub 2}TiO{sub 3} pebble was conducted. • Integrity of Li{sub 2}TiO{sub 3} pebble was able to be ensured during mass-production process, especially during batch process. - Abstract: Lithium metatitanate (Li{sub 2}TiO{sub 3}) is being considered as tritium breeding material for solid-type breeding blanket, which are used in pebble-bed form. The total amount of Li{sub 2}TiO{sub 3} pebbles in Helium Cooled Ceramic Reflector (HCCR) Test Blanket Module (TBM) is approximately 80 kg. Furthermore, DEMO reactor requires a great deal of breeder pebbles. Therefore, the development of mass-production system for breeder pebbles is necessary. The slurry droplet wetting method was adopted in the mass-production process for Li{sub 2}TiO{sub 3} pebbles, which had been developed in Korea. In this method, an automatic slurry dispensing system is one of the key apparatuses because the uniformity of pebbles and production rate are able to be improved. The system was successfully manufactured, which was consisted of a dispensing unit for instillation of Li{sub 2}TiO{sub 3} slurry, a glycerin bath for hardening of droplets, and an automatic maintaining unit for constant distance between syringe needle and glycerin surface. The production rate of this system for Li{sub 2}TiO{sub 3} pebble was estimated at 50 kg/year. In this study, it was investigated that the effect of dispensing and sintering conditions on the mass-production of Li{sub 2}TiO{sub 3} pebbles.

  18. Experimental Investigation of the Root Cause Mechanism and Effectiveness of Mitigating Actions for Axial Offset Anomaly in Pressurized Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Said Abdel-Khalik

    2005-07-02

    Axial offset anomaly (AOA) in pressurized water reactors refers to the presence of a significantly larger measured negative axial offset deviation than predicted by core design calculations. The neutron flux depression in the upper half of high-power rods experiencing significant subcooled boiling is believed to be caused by the concentration of boron species within the crud layer formed on the cladding surface. Recent investigations of the root-cause mechanism for AOA [1,2] suggest that boron build-up on the fuel is caused by precipitation of lithium metaborate (LiBO2) within the crud in regions of subcooled boiling. Indirect evidence in support of this hypothesis was inferred from operating experience at Callaway, where lithium return and hide-out were, respectively, observed following power reductions and power increases when AOA was present. However, direct evidence of lithium metaborate precipitation within the crud has, heretofore, not been shown because of its retrograde solubility. To this end, this investigation has been undertaken in order to directly verify or refute the proposed root-cause mechanism of AOA, and examine the effectiveness of possible mitigating actions to limit its impact in high power PWR cores.

  19. Reactor Physics

    Energy Technology Data Exchange (ETDEWEB)

    Ait Abderrahim, A

    2001-04-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised.

  20. Simplified method for measuring the response time of scram release electromagnet in a nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Patri, Sudheer, E-mail: patri@igcar.gov.in; Mohana, M.; Kameswari, K.; Kumar, S. Suresh; Narmadha, S.; Vijayshree, R.; Meikandamurthy, C.; Venkatesan, A.; Palanisami, K.; Murthy, D. Thirugnana; Babu, B.; Prakash, V.; Rajan, K.K.

    2015-04-15

    Highlights: • An alternative method for estimating the electromagnet clutch release time. • A systematic approach to develop a computer based measuring system. • Prototype tests on the measurement system. • Accuracy of the method is ±6% and repeatability error is within 2%. - Abstract: The delay time in electromagnet clutch release during a reactor trip (scram action) is an important safety parameter, having a bearing on the plant safety during various design basis events. Generally, it is measured using current decay characteristics of electromagnet coil and its energising circuit. A simplified method of measuring the same in a Sodium cooled fast reactors (SFR) is proposed in this paper. The method utilises the position data of control rod to estimate the delay time in electromagnet clutch release. A computer based real time measurement system for measuring the electromagnet clutch delay time is developed and qualified for retrofitting in prototype fast breeder reactor. Various stages involved in the development of the system are principle demonstration, experimental verification of hardware capabilities and prototype system testing. Tests on prototype system have demonstrated the satisfactory performance of the system with intended accuracy and repeatability.

  1. Reactor safeguards

    CERN Document Server

    Russell, Charles R

    1962-01-01

    Reactor Safeguards provides information for all who are interested in the subject of reactor safeguards. Much of the material is descriptive although some sections are written for the engineer or physicist directly concerned with hazards analysis or site selection problems. The book opens with an introductory chapter on radiation hazards, the construction of nuclear reactors, safety issues, and the operation of nuclear reactors. This is followed by separate chapters that discuss radioactive materials, reactor kinetics, control and safety systems, containment, safety features for water reactor

  2. Development and verification test of integral reactor major components - Development of MCP impeller design, performance prediction code and experimental verification

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Myung Kyoon; Oh, Woo Hyoung; Song, Jae Wook [Korea Advanced Institute of Science and Technology, Taejon (Korea)

    1999-03-01

    The present study is aimed at developing a computational code for design and performance prediction of an axial-flow pump. The proposed performance prediction method is tested against a model axial-flow pump streamline curvature method. The preliminary design is made by using the ideal velocity triangles at inlet and exit and the three dimensional blade shape is calculated by employing the free vortex design method. Then the detailed blading design is carried out by using experimental database of double circular arc cambered hydrofoils. To computationally determine the design incidence, deviation, blade camber, solidity and stagger angle, a number of correlation equations are developed form the experimental database and a theorical formula for the lift coefficient is adopted. A total of 8 equations are solved iteratively using an under-relaxation factor. An experimental measurement is conducted under a non-cavitating condition to obtain the off-design performance curve and also a cavitation test is carried out by reducing the suction pressure. The experimental results are very satisfactorily compared with the predictions by the streamline curvature method. 28 refs., 26 figs., 11 tabs. (Author)

  3. Influence of gas pressure on the effective thermal conductivity of ceramic breeder pebble beds

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Weijing [School of Civil Engineering, The University of Sydney, Sydney (Australia); Pupeschi, Simone [Institute for Applied Materials, Karlsruhe Institute of Technology (KIT) (Germany); Hanaor, Dorian [School of Civil Engineering, The University of Sydney, Sydney (Australia); Institute for Materials Science and Technologies, Technical University of Berlin (Germany); Gan, Yixiang, E-mail: yixiang.gan@sydney.edu.au [School of Civil Engineering, The University of Sydney, Sydney (Australia)

    2017-05-15

    Highlights: • This study explicitly demonstrates the influence of the gas pressure on the effective thermal conductivity of pebble beds. • The gas pressure influence is shown to correlated to the pebble size. • The effective thermal conductivity is linked to thermal-mechanical properties of pebbles and packing structure. - Abstract: Lithium ceramics have been considered as tritium breeder materials in many proposed designs of fusion breeding blankets. Heat generated in breeder pebble beds due to nuclear breeding reaction must be removed by means of actively cooled plates while generated tritiums is recovered by purge gas slowly flowing through beds. Therefore, the effective thermal conductivity of pebble beds that is one of the governing parameters determining heat transport phenomenon needs to be addressed with respect to mechanical status of beds and purge gas pressure. In this study, a numerical framework combining finite element simulation and a semi-empirical correlation of gas gap conduction is proposed to predict the effective thermal conductivity. The purge gas pressure is found to vary the effective thermal conductivity, in particular with the presence of various sized gaps in pebble beds. Random packing of pebble beds is taken into account by an approximated correlation considering the packing factor and coordination number of pebble beds. The model prediction is compared with experimental observation from different sources showing a quantitative agreement with the measurement.

  4. Fluid flow separation in a reactor pressure vessel during an ECC injection. Single phase flow and two phase flow (air-water) experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Thierry Bichet; Alain Martin [EDF - Research and Development Division - Fluid Mechanics and Heat Transfert 6, quai Watier - B.P. 49 - 78401 Chatou CEDEX 01 (France); Frederic Beaud [EDF/ Industry - Basic Design Department., 12-14, Avenue Dutrievoz 69628 Villeurbanne CEDEX (France)

    2005-07-01

    Full text of publication follows: Within the framework of the nuclear power plant lifetime issue, the assessment of the French 900 MWe (3-loops) series reactor pressure vessel (RPV) integrity has been performed. A simplified analysis has shown that the most severe loading conditions are given by the small break loss of coolant accidents due to the pressurized injection of cold water (9 deg. C) into the cold leg and down comer of the RPV. During these transient scenarios, single or two-phase (uncovered cold leg) flows have been shown in the cold leg, depending on the crack size and RPV model (900 MWe or 1300 MWe). An experimental study has been carried out, on the one hand, to consolidate the numerical results obtained with CFD home code (Code-Saturne) which mainly showed the stratified flow in the cold leg and the fluid flow separation and its oscillations in the down comer during a single phase scenario. These physical phenomena are important for the thermal RPV loading assessment. On the other hand, the absence of experimental two-phase data necessitated to carry out an experimental study around the mixing area behavior (free surface, stratified flow) during an ECC injection with an uncovered cold leg. The new EDF R and D mock up, called HYBISCUS, is a facility which is made out of Plexiglas (atmosphere pressure) and represents a half scale CP0 geometry with one cold leg and part of the down comer. The mock up modularity allows us to insert representative ECC nozzles and a thermal shield. In reference to the reactor scenarios, the experimental operating conditions are derived from the conservation of the density effects (Froude number). For that, a heated salted water flow is used to represent the ECC injection whereas water represents the cold leg fluid. This mock up has been defined in order to represent single phase flow (cold leg and down comer full of water) or two-phase flow (uncovered cold leg) ECC scenarios. This paper reports experimental results

  5. Reactor flux calculations

    Energy Technology Data Exchange (ETDEWEB)

    Lhuillier, D. [Commissariat à l' Énergie Atomique et aux Énergies Alternatives, Centre de Saclay, IRFU/SPhN, 91191 Gif-sur-Yvette (France)

    2013-02-15

    The status of the prediction of reactor anti-neutrino spectra is presented. The most accurate method is still the conversion of total β spectra of fissionning isotopes as measured at research reactors. Recent re-evaluations of the conversion process led to an increased predicted flux by few percent and were at the origin of the so-called reactor anomaly. The up to date predictions are presented with their main sources of error. Perspectives are given on the complementary ab-initio predictions and upcoming experimental cross-checks of the predicted spectrum shape.

  6. The International Breeder's Rights System and Crop Plant Innovation.

    Science.gov (United States)

    Barton, J H

    1982-06-04

    Legal arrangements governing a plant breeder's intellectual property rights to his inventions are likely to affect the future of crop research. Such systems, although controversial, are probably currently desirable for the developed world. The new genetic technologies may change this judgment, and certainly require redefinition of the lines between plant patents and regular patents. Several safeguards, present in the United States breeder's rights law, should be applied more broadly. A new safeguard-of ensuring that material be entered into germplasm banks-should be applied everywhere. For the developing world, the desirability of a plant patent system is much less clear; new agreements may be desirable to ensure the free flow and collection of germplasm.

  7. Experimental studies and computational benchmark on heavy liquid metal natural circulation in a full height-scale test loop for small modular reactors

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Yong-Hoon, E-mail: chaotics@snu.ac.kr [Department of Energy Systems Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 08826 (Korea, Republic of); Cho, Jaehyun [Korea Atomic Energy Research Institute, 111 Daedeok-daero, 989 Beon-gil, Yuseong-gu, Daejeon 34057 (Korea, Republic of); Lee, Jueun; Ju, Heejae; Sohn, Sungjune; Kim, Yeji; Noh, Hyunyub; Hwang, Il Soon [Department of Energy Systems Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 08826 (Korea, Republic of)

    2017-05-15

    Highlights: • Experimental studies on natural circulation for lead-bismuth eutectic were conducted. • Adiabatic wall boundaries conditions were established by compensating heat loss. • Computational benchmark with a system thermal-hydraulics code was performed. • Numerical simulation and experiment showed good agreement in mass flow rate. • An empirical relation was formulated for mass flow rate with experimental data. - Abstract: In order to test the enhanced safety of small lead-cooled fast reactors, lead-bismuth eutectic (LBE) natural circulation characteristics have been studied. We present results of experiments with LBE non-isothermal natural circulation in a full-height scale test loop, HELIOS (heavy eutectic liquid metal loop for integral test of operability and safety of PEACER), and the validation of a system thermal-hydraulics code. The experimental studies on LBE were conducted under steady state as a function of core power conditions from 9.8 kW to 33.6 kW. Local surface heaters on the main loop were activated and finely tuned by trial-and-error approach to make adiabatic wall boundary conditions. A thermal-hydraulic system code MARS-LBE was validated by using the well-defined benchmark data. It was found that the predictions were mostly in good agreement with the experimental data in terms of mass flow rate and temperature difference that were both within 7%, respectively. With experiment results, an empirical relation predicting mass flow rate at a non-isothermal, adiabatic condition in HELIOS was derived.

  8. The Effect of Degree of Photostimulation on Male Broiler Breeder ...

    African Journals Online (AJOL)

    Nicky

    Abstract. The effect of photostimulation of male broiler breeders (n = 144) to different photoperiods (8-h control and 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13, 14 and 18 h) applied at 20 weeks of age, on age at first semen production, testis weights, as predicted by comb area, and semen characteristics at the reported age at first.

  9. Local Neutron Flux Distribution Measurements by Wire-Dosimetry in the AMMON Experimental Program in the EOLE Reactor

    Directory of Open Access Journals (Sweden)

    Gruel A.

    2016-01-01

    Full Text Available Dosimetry measurements were carried out during the AMMON experimental program, in the EOLE facility. Al-0.1 wt% Au wires were positioned along curved fuel plates of JHR-type assemblies to investigate the azimuthal and axial gold capture rate profiles, directly linked to the thermal and epithermal flux. After irradiation, wires were cut into small segments (a few mm, and the gold capture rate of each part was measured by gamma spectrometry on the MADERE platform. This paper presents results in the “hafnium” configuration, and more specifically the azimuthal flux profile characterization. The final uncertainty on each measured wire lies below 1% (at 2 standard deviations. Experimental profiles are in a good agreement against Monte Carlo calculations, and the 4% capture rate increase at the plate edge is well observed. The flux dissymmetry due to assembly position in the core is also measured, and shows a 10% discrepancy between the two edges of the plate.

  10. Research Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Martens, Frederick H. [Argonne National Laboratory; Jacobson, Norman H.

    1968-09-01

    This booklet discusses research reactors - reactors designed to provide a source of neutrons and/or gamma radiation for research, or to aid in the investigation of the effects of radiation on any type of material.

  11. Study of the pyrochemical treatment-recycling process of the Molten Salt Reactor fuel; Estudio de sistema de un proceso de tratamiento-reciclaje piroquimico del combustible de un reactor de sales fundidas

    Energy Technology Data Exchange (ETDEWEB)

    Boussier, H.; Heuer, D.

    2010-07-01

    The Separation Processes Studies Laboratory (Commissariat a l'energie Atomique) has made a preliminary assessment of the reprocessing system associated with Molten Salt Fast Reactor (MSFR). The scheme studied in this paper is based on the principle of reductive extraction and metal transfer that constituted the core process designed for the Molten Salt Breeder Reactor (MSBR), although the flow diagram has been adapted to the current needs of the Molten Salt Fast Reactor (MSFR).

  12. The Fast-spectrum Transmutation Experimental Facility FASTEF: Main design achievements (part 2: Reactor building design and plant layout) within the FP7-CDT collaborative project of the European Commission

    Energy Technology Data Exchange (ETDEWEB)

    De Bruyn, D.; Engelen, J. [Belgian Nuclear Research Centre SCK CEN, Boeretang 200, 2400 Mol (Belgium); Ortega, A.; Aguado, M. P. [Empresarios Agrupados A.I.E., Magallanes 3, 28015 Madrid (Spain)

    2012-07-01

    MYRRHA (Multi-purpose hybrid Research Reactor for High-tech Applications) is the flexible experimental accelerator-driven system (ADS) in development at SCK-CEN in replacement of its material testing reactor BR2. SCK-CEN in association with 17 European partners from industry, research centres and academia, responded to the FP7 (Seventh Framework Programme) call from the European Commission to establish a Central Design Team (CDT) for the design of a Fast Spectrum Transmutation Experimental Facility (FASTEF) able to demonstrate efficient transmutation and associated technology through a system working in subcritical and/or critical mode. The project has started on April 01, 2009 for a period of three years. In this paper, we present the latest concept of the reactor building and the plant layout. The FASTEF facility has evolved quite a lot since the intermediate reporting done at the ICAPP'10 and ICAPP'11 conferences 1,2. Many iterations have been performed to take into account the safety requirements. The present configuration enables an easy operation and maintenance of the facility, including the possibility to change large components of the reactor. In a companion paper 3, we present the latest configuration of the reactor core and primary system. (authors)

  13. Progress of thermal hydraulic evaluation methods and experimental studies on a sodium-cooled fast reactor and its safety in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Kamide, Hideki, E-mail: kamide.hideki@jaea.go.jp; Ohshima, Hiroyuki, E-mail: ohshima.hiroyuki@jaea.go.jp; Sakai, Takaaki, E-mail: sakai.takaaki@jaea.go.jp; Tanaka, Masaaki, E-mail: tanaka.masaaki@jaea.go.jp

    2017-02-15

    Highlights: • Thermal hydraulic issues for safety design criteria of sodium cooled fast reactors. • Measurement of velocity data in a subchannel surrounded by wire wrapped fuel-pins. • Statistical evaluation of core hot spot temperature during natural circulation. • Simulation of dynamics of molten fuel pool in a core disruptive accident. • V&V procedure of a multi-dimensional thermal hydraulic code on thermal striping. - Abstract: In the framework of the Generation-IV International Forum, the safety design criteria (SDC) incorporating safety-related R&D results on innovative technologies and lessons learned from Fukushima Dai-ichi nuclear power plants accident has been established to provide the set of general criteria for the safety designs of structures, systems and components of Generation-IV Sodium-cooled Fast Reactors (Gen-IV SFRs). A number of thermal-hydraulic evaluations are necessary to meet the concept of the criteria in the design studies of Gen-IV SFRs. This paper focuses on four kinds of thermal-hydraulic issues associated with the SDC, i.e., fuel subassembly thermal-hydraulics, natural circulation decay heat removal, core disruptive accidents, and thermal striping. Progress of evaluation methods on these issues is shown with activities on verification and validation (V&V) and experimental studies towards commercialization of SFR in Japan. These evaluation methods are planned to be eventually integrated into a comprehensive numerical simulation system that can be applied to all possible phenomena in SFR systems and that can be expected to become an effective tool for the development of human resource and the handing our knowledge and technologies down.

  14. Analysis and interpretation of residence time distribution experimental curves in FM01-LC reactor using axial dispersion and plug dispersion exchange models with closed-closed boundary conditions

    Energy Technology Data Exchange (ETDEWEB)

    Rivera, Fernando F. [Departamento de Quimica, Universidad Autonoma Metropolitana-Iztapalapa, San Rafael Atlixco 186, C.P. 09340, Mexico, D.F. (Mexico); Cruz-Diaz, Martin R., E-mail: mcruz@tese.edu.m [Division de Quimica y Bioquimica, Tecnologico de Estudios Superiores de Ecatepec, Av. Tecnologico S/N Esq. Av. Hank Gonzalez, Valle de Anahuac, C.P. 55120, Ecatepec, Edo. de Mex (Mexico); Rivero, Eligio P. [Departamento de Ingenieria y Tecnologia, Universidad Nacional Autonoma de Mexico, Facultad de Estudios Superiores Cuautitlan, Av. Primero de Mayo, Cuautitlan Izcalli, C.P. 54740, Edo. de Mex (Mexico); Gonzalez, Ignacio [Departamento de Quimica, Universidad Autonoma Metropolitana-Iztapalapa, San Rafael Atlixco 186, C.P. 09340, Mexico, D.F. (Mexico)

    2010-12-15

    The liquid phase mixing flow pattern at low (20 < Re < 120) and intermediate liquid flow rate (120 < Re < 400) was studied by means of residence time distribution (RTD) experimental curve in an up-flow Filter Press electrochemical reactor (FM01-LC) bench scale. For this purpose, a plastic turbulence promoter was used with stainless-steel and platinised titanium structural meshes as electrodes in channel configuration. To visualize and determine the mixing flow pattern in the liquid phase, the stimulus-response technique was employed using dextran blue (D{sub M} = 1.058 x 10{sup -11} m{sup 2} s{sup -1}, 25 {sup o}C, in water) as model tracer. A theoretical analysis and approximation RTD experimental curves with axial dispersion model (ADM) and plug dispersion exchange model (PDE), with 'closed-closed vessel' boundary conditions were used in order to establish a better approximation of the axial dispersion, stagnant zones, channelling and by-pass (preference flow) effects present at low and intermediate Re. RTD curves show that the liquid flow pattern in the FM01-LC deviates considerably from axial dispersion model at low Re, where the FM01-LC exhibits large channelling, stagnant zones, and dead zone. The PDE model represents fairly this deviation from ideal flow (less dead zone).

  15. Experimental study on fluid mixing in a fuel subassembly of a fast reactor. Temperature field around heated pin with cross flow

    Energy Technology Data Exchange (ETDEWEB)

    Miyakoshi, Hiroyuki; Kamide, Hideki; Tanaka, Masaaki; Yamamoto, Kazuhiro [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    2002-03-01

    High burnup of the core is one of means to reduce the cost of a fast reactor and fuel cycle system. However, it is not enough to investigate thermohydraulics in the core, in which fuel and wrapper tube are deformed due to irradiation under high burnup condition. In this study, sodium experiment was performed to investigate fluid mixing in a wire-wrapped 37-pin subassembly model, which had local blockage and cross flow around the blockage. Such cross flow is one of elements of thermohydraulics in a deformed subassembly. The experimental results is useful to develop numerical simulation method for the deformed subassembly. Seven pins, each had different relative position to the blockage, were heated individually in the experiments. Temperature field in the subassembly was measured. Influences of the flow rate and heater power were also examined. A horizontal cross flow occurred in upstream region toward the blockage. It was observed that the temperature field was influenced by this cross flow. The measured temperature field showed that there was a bypass flow around the blockage, which flowed toward the center of subassembly. The cross flow due to the bypass flow reached the 3rd row of pins from the blockage. The swirl flow, resulted from the spacer wire, also influenced the temperature field. The obtained experimental data will be used to develop and verify a numerical simulation method for a deformed fuel subassembly. (author)

  16. REVIEW OF EXPERIMENTAL CAPABILITIES AND HYDRODYNAMIC DATA FOR VALIDATION OF CFD-BASED PREDICTIONS FOR SLURRY BUBBLE COLUMN REACTORS

    Energy Technology Data Exchange (ETDEWEB)

    Donna Post Guillen; Daniel S. Wendt; Steven P. Antal; Michael Z. Podowski

    2007-11-01

    The purpose of this paper is to document the review of several open-literature sources of both experimental capabilities and published hydrodynamic data to aid in the validation of a Computational Fluid Dynamics (CFD) based model of a slurry bubble column (SBC). The review included searching the Web of Science, ISI Proceedings, and Inspec databases, internet searches as well as other open literature sources. The goal of this study was to identify available experimental facilities and relevant data. Integral (i.e., pertaining to the SBC system), as well as fundamental (i.e., separate effects are considered), data are included in the scope of this effort. The fundamental data is needed to validate the individual mechanistic models or closure laws used in a Computational Multiphase Fluid Dynamics (CMFD) simulation of a SBC. The fundamental data is generally focused on simple geometries (i.e., flow between parallel plates or cylindrical pipes) or custom-designed tests to focus on selected interfacial phenomena. Integral data covers the operation of a SBC as a system with coupled effects. This work highlights selected experimental capabilities and data for the purpose of SBC model validation, and is not meant to be an exhaustive summary.

  17. REVIEW OF EXPERIMENTAL CAPABILITIES AND HYDRODYNAMIC DATA FOR VALIDATION OF CFD BASED PREDICTIONS FOR SLURRY BUBBLE COLUMN REACTORS

    Energy Technology Data Exchange (ETDEWEB)

    Donna Post Guillen; Daniel S. Wendt

    2007-11-01

    The purpose of this paper is to document the review of several open-literature sources of both experimental capabilities and published hydrodynamic data to aid in the validation of a Computational Fluid Dynamics (CFD) based model of a slurry bubble column (SBC). The review included searching the Web of Science, ISI Proceedings, and Inspec databases, internet searches as well as other open literature sources. The goal of this study was to identify available experimental facilities and relevant data. Integral (i.e., pertaining to the SBC system), as well as fundamental (i.e., separate effects are considered), data are included in the scope of this effort. The fundamental data is needed to validate the individual mechanistic models or closure laws used in a Computational Multiphase Fluid Dynamics (CMFD) simulation of a SBC. The fundamental data is generally focused on simple geometries (i.e., flow between parallel plates or cylindrical pipes) or custom-designed tests to focus on selected interfacial phenomena. Integral data covers the operation of a SBC as a system with coupled effects. This work highlights selected experimental capabilities and data for the purpose of SBC model validation, and is not meant to be an exhaustive summary.

  18. Effect of dietary supplementation of essential oils mixture on performance, eggshell quality, hatchability, and mineral excretion in quail breeders.

    Science.gov (United States)

    Olgun, Osman; Yıldız, Alp Önder

    2014-12-01

    The main aim of this study was to investigate the effect of six different levels (0, 50, 100, 200, 400, and 600 mg/kg) of phytogenic feed additive containing a mixture essential oils from thyme, black cumin, fennel, anise and rosemary on performance, eggshell quality, reproductive traits, and mineral excretion in quail breeders. In this trial, a total of 60 male and 120 female quails, 91 days old, were randomly distributed in six experimental groups. During the 60-day experiment period, birds were fed with six treatment diets. Performances, eggshell qualities, hatchability, and mineral excretion data were evaluated at the end of the experiment. Results showed that the different dietary levels of essential oil mixture had no significant effect on performance parameters, damaged eggs, eggshell weight, fertility, hatchability of fertile eggs, hatchability of set eggs, and lead and boron excretion. On the other hand, 50 mg/kg supplementation of essential oil mixture (EOM) significantly improved egg-breaking strength and eggshell thickness, and ash, calcium, phosphorus, magnesium, manganese, zinc, and cadmium excretion was significantly depressed in quail breeders supplemented with the two higher doses (400 or 600 mg/kg) of EOM. These results concluded that supplementing diets with EOM improved egg-breaking strength and decreased excretion of minerals in breeder quails.

  19. General meeting. Technical reunion: the numerical and experimental simulation applied to the Reactor Physics; Assemblee generale. Reunion technique: la simulation numerique et experimentale appliquee a la physique des reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-10-01

    The SFEN (French Society on Nuclear Energy), organized the 18 october 2001 at Paris, a technical day on the numerical and experimental simulation, applied to the reactor Physics. Nine aspects were discussed, giving a state of the art in the domain:the french nuclear park; the future technology; the controlled thermonuclear fusion; the new organizations and their implications on the research and development programs; Framatome-ANP markets and industrial code packages; reactor core simulation at high temperature; software architecture; SALOME; DESCARTES. (A.L.B.)

  20. Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle descriptions

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The Nonproliferation Alternative Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates. Volume IX is divided into three sections: Chapter 1, Reactor Systems; Chapter 2, Fuel-Cycle Systems; and the Appendixes. Chapter 1 contains the characterizations of the following 12 reactor types: light-water reactor; heavy-water reactor; water-cooled breeder reactor; high-temperature gas-cooled reactor; gas-cooled fast reactor; liquid-metal fast breeder reactor; spectral-shift-controlled reactor; accelerator-driven reactor; molten-salt reactor; gaseous-core reactor; tokamak fusion-fisson hybrid reactor; and fast mixed-spectrum reactor. Chapter 2 contains similar information developed for fuel-cycle facilities in the following categories: mining and milling; conversion and enrichment; fuel fabrication; spent fuel reprocessing; waste handling and disposal; and transportation of nuclear materials.

  1. CONVECTION REACTOR

    Science.gov (United States)

    Hammond, R.P.; King, L.D.P.

    1960-03-22

    An homogeneous nuclear power reactor utilizing convection circulation of the liquid fuel is proposed. The reactor has an internal heat exchanger looated in the same pressure vessel as the critical assembly, thereby eliminating necessity for handling the hot liquid fuel outside the reactor pressure vessel during normal operation. The liquid fuel used in this reactor eliminates the necessity for extensive radiolytic gas rocombination apparatus, and the reactor is resiliently pressurized and, without any movable mechanical apparatus, automatically regulates itself to the condition of criticality during moderate variations in temperature snd pressure and shuts itself down as the pressure exceeds a predetermined safe operating value.

  2. Experimental Measurements of Heat Transfer through a Lunar Regolith Simulant in a Vibro-Fluidized Reactor Oven

    Science.gov (United States)

    Nayagam, Vedha; Berger, Gordon M.; Sacksteder, Kurt R.; Paz, Aaron

    2012-01-01

    Extraction of mission consumable resources such as water and oxygen from the planetary environment provides valuable reduction in launch-mass and potentially extends the mission duration. Processing of lunar regolith for resource extraction necessarily involves heating and chemical reaction of solid material with processing gases. Vibrofluidization is known to produce effective mixing and control of flow within granular media. In this study we present experimental results for vibrofluidized heat transfer in lunar regolith simulants (JSC-1 and JSC-1A) heated up to 900 C. The results show that the simulant bed height has a significant influence on the vibration induced flow field and heat transfer rates. A taller bed height leads to a two-cell circulation pattern whereas a single-cell circulation was observed for a shorter height. Lessons learned from these test results should provide insight into efficient design of future robotic missions involving In-Situ Resource Utilization.

  3. Pebble Bed Reactor: core physics and fuel cycle analysis

    Energy Technology Data Exchange (ETDEWEB)

    Vondy, D.R.; Worley, B.A.

    1979-10-01

    The Pebble Bed Reactor is a gas-cooled, graphite-moderated high-temperature reactor that is continuously fueled with small spherical fuel elements. The projected performance was studied over a broad range of reactor applicability. Calculations were done for a burner on a throwaway cycle, a converter with recycle, a prebreeder and breeder. The thorium fuel cycle was considered using low, medium (denatured), and highly enriched uranium. The base calculations were carried out for electrical energy generation in a 1200 MW/sub e/ plant. A steady-state, continuous-fueling model was developed and one- and two-dimensional calculations were used to characterize performance. Treating a single point in time effects considerable savings in computer time as opposed to following a long reactor history, permitting evaluation of reactor performance over a broad range of design parameters and operating modes.

  4. Advanced reactor safety research quarterly report, October-December 1982. Volume 24

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-04-01

    This report describes progress in a number of activities dealing with current safety issues relevant to both light water reactors (LWRs) and breeder reactors. The work includes a broad range of experiments to simulate accidental conditions to provide the required data base to understand important accident sequences and to serve as a basis for development and verification of the complex computer simulation models and codes used in accident analysis and licensing reviews. Such a program must include the development of analytical models, verified by experiment, which can be used to predict reactor and safety system performance under a broad variety of abnormal conditions. Current major emphasis is focused on providing information to NRC relevant to (1) its deliberations and decisions dealing with severe LWR accidents and (2) its safety evaluation of the proposed Clinch River Breeder Reactor.

  5. Outline of the safety research results, in the power reactor field, fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Power Reactor and Nuclear Fuel Development Corporation (PNC) has promoted the safety research in fiscal year of 1996 according to the Fundamental Research on Safety Research (fiscal year 1996 to 2000) prepared on March, 1996. Here is described on the research results in fiscal year 1996, the first year of the 5 years programme, and whole outline of the fundamental research on safety research, on the power reactor field (whole problems on the new nuclear converter and the fast breeder reactor field and problems relating to the power reactor in the safety for earthquake and probability theoretical safety evaluation field). (G.K.)

  6. Selection of Breeding Stock among Australian Purebred Dog Breeders, with Particular Emphasis on the Dam

    Directory of Open Access Journals (Sweden)

    Veronika Czerwinski

    2016-11-01

    Full Text Available Every year, thousands of purebred domestic dogs are bred by registered dog breeders. Yet, little is known about the rearing environment of these dogs, or the attitudes and priorities surrounding breeding practices of these dog breeders. The objective of this study was to explore some of the factors that dog breeders consider important for stock selection, with a particular emphasis on issues relating to the dam. Two-hundred and seventy-four Australian purebred dog breeders, covering 91 breeds across all Australian National Kennel Club breed groups, completed an online survey relating to breeding practices. Most breeders surveyed (76% reported specialising in one breed of dog, the median number of dogs and bitches per breeder was two and three respectively, and most breeders bred two litters or less a year. We identified four components, relating to the dam, that were considered important to breeders. These were defined as Maternal Care, Offspring Potential, Dam Temperament, and Dam Genetics and Health. Overall, differences were observed in attitudes and beliefs across these components, showing that there is variation according to breed/breed groups. In particular, the importance of Maternal Care varied according to dog breed group. Breeders of brachycephalic breeds tended to differ the most in relation to Offspring Potential and Dam Genetics and Health. The number of breeding dogs/bitches influenced breeding priority, especially in relation to Dam Temperament, however no effect was found relating to the number of puppies bred each year. Only 24% of breeders used their own sire for breeding. The finding that some breeders did not test for diseases relevant to their breed, such as hip dysplasia in Labrador Retrievers and German Shepherds, provides important information on the need to educate some breeders, and also buyers of purebred puppies, that screening for significant diseases should occur. Further research into the selection of breeding dams

  7. Selection of Breeding Stock among Australian Purebred Dog Breeders, with Particular Emphasis on the Dam.

    Science.gov (United States)

    Czerwinski, Veronika; McArthur, Michelle; Smith, Bradley; Hynd, Philip; Hazel, Susan

    2016-11-16

    Every year, thousands of purebred domestic dogs are bred by registered dog breeders. Yet, little is known about the rearing environment of these dogs, or the attitudes and priorities surrounding breeding practices of these dog breeders. The objective of this study was to explore some of the factors that dog breeders consider important for stock selection, with a particular emphasis on issues relating to the dam. Two-hundred and seventy-four Australian purebred dog breeders, covering 91 breeds across all Australian National Kennel Club breed groups, completed an online survey relating to breeding practices. Most breeders surveyed (76%) reported specialising in one breed of dog, the median number of dogs and bitches per breeder was two and three respectively, and most breeders bred two litters or less a year. We identified four components, relating to the dam, that were considered important to breeders. These were defined as Maternal Care, Offspring Potential, Dam Temperament, and Dam Genetics and Health. Overall, differences were observed in attitudes and beliefs across these components, showing that there is variation according to breed/breed groups. In particular, the importance of Maternal Care varied according to dog breed group. Breeders of brachycephalic breeds tended to differ the most in relation to Offspring Potential and Dam Genetics and Health. The number of breeding dogs/bitches influenced breeding priority, especially in relation to Dam Temperament, however no effect was found relating to the number of puppies bred each year. Only 24% of breeders used their own sire for breeding. The finding that some breeders did not test for diseases relevant to their breed, such as hip dysplasia in Labrador Retrievers and German Shepherds, provides important information on the need to educate some breeders, and also buyers of purebred puppies, that screening for significant diseases should occur. Further research into the selection of breeding dams and sires will

  8. Gas-cooled fast reactor program. Progress report, January 1, 1980-June 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Kasten, P.R.

    1981-09-01

    Since the national Gas-Cooled Fast Breeder Reactor Program has been terminated, this document is the last progress report until reinstatement. It is divided into three sections: Core Flow Test Loop, GCFR shielding and physics, and GCFR pressure vessel and closure studies. (DLC)

  9. Fabrication Technological Development of the Oxide Dispersion Strengthened Alloy MA957 for Fast Reactor Applications

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Margaret L.; Gelles, David S.; Lobsinger, Ralph J.; Johnson, Gerald D.; Brown, W. F.; Paxton, Michael M.; Puigh, Raymond J.; Eiholzer, Cheryl R.; Martinez, C.; Blotter, M. A.

    2000-02-28

    A significant amount of effort has been devoted to determining the properties and understanding the behavior of the alloy MA957 to define its potential usefulness as a cladding material in the fast breeder reactor program. The numerous characterization and fabrication studies that were conducted are documented in this report.

  10. Engineering studies to support a liquid sodium cooled pebble bed target/blanket for an accelerator breeder

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, K.C.; Malenfant, R.E.

    1977-01-01

    Preliminary calculations on using a liquid sodium cooled pebble bed of thorium metal for the target and blanket of a particle accelerator to convert fertile material to fissile have indicated the concept has considerable merit. Fuel management is simple and continuous on-line feed is effected. Additional features include excellent heat transfer, low pressure drop, minimization of structures and enhanced safety. Promising features strongly suggest that the work be continued to further refine the studies. Although specific to the target and blanket of the accelerator breeder concept, the work is readily extended to a high efficiency liquid metal cooled nuclear reactor employing a pebble bed as the fuel. 10 refs., 4 figs., 1 tab.

  11. Lay-out and materials for in pile tritium transport testing of breeder-inside-tube pin assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Alvani, C. [ENEA, CR Casaccia, Rome (Italy); Avon, J. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Grenoble (France); Casadio, S. [ENEA, CR Casaccia, Rome (Italy); Mancini, M.R. [ENEA, CR Casaccia, Rome (Italy); Nannetti, C.A. [ENEA, CR Casaccia, Rome (Italy); Pruzzo, G. [ENEA, CR Casaccia, Rome (Italy)]|[FN, Bosco Marengo-Alessandria (Italy); Ravel, S. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Grenoble (France); Roux, N. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN Saclay, Gif-sur-Yvette (France); Terlain, A. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Fontenay-aux-Roses (France); Terrosi [ENEA, CR Casaccia, Rome (Italy)]|[FN, Bosco Marengo-Alessandria (Italy); Zaghini, P. [ENEA, CR Casaccia, Rome (Italy)]|[FIN-Ceramica, Faenza, Ravenna (Italy); Zanardi, P. [ENEA, CR Casaccia, Rome (Italy)]|[ENEA, CR Clementel-Bologna (Italy); Zanotti, M. [ENEA, CR Casaccia, Rome (Italy)]|[ENEA, CR Clementel-Bologna (Italy)

    1995-12-31

    An irradiation experiment (90 FPD in SILOE reactor) has been designed in order to evaluate the in-situ effect of red-ox power of sweeping gas (helium with 100 vpm of H{sub 2}/H{sub 2}O with relative concentrations varying from pure H{sub 2} to pure H{sub 2}O) on (a) Tritium removal from LiAlO{sub 2} and Li{sub 2}ZrO{sub 3}; (b) Tritium permeation through AISI-316L SS tubes with bare and coated surfaces. The conditions and materials explored were selected in order to test possible improvements with respect to critical issues for the `Breeder Inside Tube` (BIT) blanket concept development. (orig.).

  12. Dosimetry and radiobiology at the new RA-3 reactor boron neutron capture therapy (BNCT) facility: Application to the treatment of experimental oral cancer

    Energy Technology Data Exchange (ETDEWEB)

    Pozzi, E. [Research and Production Reactors, National Atomic Energy Commission, Ezeiza Atomic Center (Argentina); Department of Radiobiology, National Atomic Energy Commission, Constituyentes Atomic Center (Argentina)], E-mail: epozzi@cnea.gov.ar; Nigg, D.W. [Idaho National Laboratory, Idaho Falls (United States); Miller, M.; Thorp, S.I. [Instrumentation and Control Department, National Atomic Energy Commission, Ezeiza Atomic Center (Argentina); Heber, E.M. [Department of Radiobiology, National Atomic Energy Commission, Constituyentes Atomic Center (Argentina); Zarza, L.; Estryk, G. [Research and Production Reactors, National Atomic Energy Commission, Ezeiza Atomic Center (Argentina); Monti Hughes, A.; Molinari, A.J.; Garabalino, M. [Department of Radiobiology, National Atomic Energy Commission, Constituyentes Atomic Center (Argentina); Itoiz, M.E. [Department of Radiobiology, National Atomic Energy Commission, Constituyentes Atomic Center (Argentina); Department of Oral Pathology, Faculty of Dentistry, University of Buenos Aires (Argentina); Aromando, R.F. [Department of Oral Pathology, Faculty of Dentistry, University of Buenos Aires (Argentina); Quintana, J. [Research and Production Reactors, National Atomic Energy Commission, Ezeiza Atomic Center (Argentina); Trivillin, V.A.; Schwint, A.E. [Department of Radiobiology, National Atomic Energy Commission, Constituyentes Atomic Center (Argentina)

    2009-07-15

    The National Atomic Energy Commission of Argentina (CNEA) constructed a novel thermal neutron source for use in boron neutron capture therapy (BNCT) applications at the RA-3 research reactor facility located in Buenos Aires. The aim of the present study was to perform a dosimetric characterization of the facility and undertake radiobiological studies of BNCT in an experimental model of oral cancer in the hamster cheek pouch. The free-field thermal flux was 7.1x10{sup 9} n cm{sup -2} s{sup -1} and the fast neutron flux was 2.5x10{sup 6} n cm{sup -2} s{sup -1}, indicating a very well-thermalized neutron field with negligible fast neutron dose. For radiobiological studies it was necessary to shield the body of the hamster from the neutron flux while exposing the everted cheek pouch bearing the tumors. To that end we developed a lithium (enriched to 95% in {sup 6}Li) carbonate enclosure. Groups of tumor-bearing hamsters were submitted to BPA-BNCT, GB-10-BNCT, (GB-10+BPA)-BNCT or beam only treatments. Normal (non-cancerized) hamsters were treated similarly to evaluate normal tissue radiotoxicity. The total physical dose delivered to tumor with the BNCT treatments ranged from 6 to 8.5 Gy. Tumor control at 30 days ranged from 73% to 85%, with no normal tissue radiotoxicity. Significant but reversible mucositis in precancerous tissue surrounding tumors was associated to BPA-BNCT. The therapeutic success of different BNCT protocols in treating experimental oral cancer at this novel facility was unequivocally demonstrated.

  13. Combined coagulation-flocculation and sequencing batch reactor with phosphorus adjustment for the treatment of high-strength landfill leachate: experimental kinetics and chemical oxygen demand fractionation.

    Science.gov (United States)

    El-Fadel, M; Matar, F; Hashisho, J

    2013-05-01

    The treatability of high-strength landfill leachate is challenging and relatively limited. This study examines the feasibility of treating high-strength landfill leachate (chemical oxygen demand [COD]: 7,760-11,770 mg/L, biochemical oxygen demand [BOD5]: 2,760-3,569 mg/L, total nitrogen [TN] = 980-1,160 mg/L) using a sequencing batch reactor (SBR) preceded by a coagulation-flocculation process with phosphorus nutritional balance under various mixing and aeration patterns. Simulations were also conducted to define kinetic parameters and COD fractionation. Removal efficiencies reached 89% for BOD5, 60% for COD, and 72% for TN, similar to and better than reported studies, albeit with a relatively lower hydraulic retention time (HRT) and solid retention time (SRT). The coupled experimental and simulation results contribute in filling a gap toward managing high-strength landfill leachate and providing guidelines for corresponding SBR applications. The treatability of high-strength landfill leachate, which is challenging and relatively limited, was demonstrated using a combined coagulation-flocculation with SBR technology and nutrient balance adjustment. The most suitable coagulant, kinetic design parameters, and COD fractionation were defined using coupled experimental and simulation results contributing in filling a gap toward managing high-strength leachate by providing guidelines for corresponding SBR applications and anticipating potential constraints related to the non-biodegradable COD fraction. In this context, while the combined coagulation-flocculation and SBR process improved removal efficiencies, posttreatment may be required for high-strength leachate, depending on discharge standards and ultimate usage of the treated leachate.

  14. Dosimetry and radiobiology at the new RA-3 reactor boron neutron capture therapy (BNCT) facility: application to the treatment of experimental oral cancer.

    Science.gov (United States)

    Pozzi, E; Nigg, D W; Miller, M; Thorp, S I; Heber, E M; Zarza, L; Estryk, G; Monti Hughes, A; Molinari, A J; Garabalino, M; Itoiz, M E; Aromando, R F; Quintana, J; Trivillin, V A; Schwint, A E

    2009-07-01

    The National Atomic Energy Commission of Argentina (CNEA) constructed a novel thermal neutron source for use in boron neutron capture therapy (BNCT) applications at the RA-3 research reactor facility located in Buenos Aires. The aim of the present study was to perform a dosimetric characterization of the facility and undertake radiobiological studies of BNCT in an experimental model of oral cancer in the hamster cheek pouch. The free-field thermal flux was 7.1 x 10(9) n cm(-2)s(-1) and the fast neutron flux was 2.5 x 10(6) n cm(-2)s(-1), indicating a very well-thermalized neutron field with negligible fast neutron dose. For radiobiological studies it was necessary to shield the body of the hamster from the neutron flux while exposing the everted cheek pouch bearing the tumors. To that end we developed a lithium (enriched to 95% in (6)Li) carbonate enclosure. Groups of tumor-bearing hamsters were submitted to BPA-BNCT, GB-10-BNCT, (GB-10+BPA)-BNCT or beam only treatments. Normal (non-cancerized) hamsters were treated similarly to evaluate normal tissue radiotoxicity. The total physical dose delivered to tumor with the BNCT treatments ranged from 6 to 8.5 Gy. Tumor control at 30 days ranged from 73% to 85%, with no normal tissue radiotoxicity. Significant but reversible mucositis in precancerous tissue surrounding tumors was associated to BPA-BNCT. The therapeutic success of different BNCT protocols in treating experimental oral cancer at this novel facility was unequivocally demonstrated.

  15. Ochratoxicosis in White Leghorn breeder hens: Production and breeding performance

    Directory of Open Access Journals (Sweden)

    Zahoor Ul Hassan*, Muhammad Zargham Khan, Ahrar Khan, Ijaz Javed1, Umer Sadique2 and Aisha Khatoon

    2012-10-01

    Full Text Available This study was designed to evaluate the effect of Ochratoxin A (OTA upon production and breeding parameters in White Leghorn (WL breeder hens. For this purpose, 84 WL breeder hens were divided into seven groups (A-G. The hens in these groups were maintained on feed contaminated with OTA @ 0.0 (control, 0.1, 0.5, 1.0, 3.0, 5.0 and 10.0 mg/Kg, respectively for 21 days. These hens were artificially inseminated with semen obtained from healthy roosters kept on OTA free feed. Egg production and their quality parameters were recorded. Fertile eggs obtained from each group were set for incubation on weekly basis. At the end of the experiment, hens in each group were killed to determined gross and microscopic lesions in different organs. OTA residue concentrations were determined in extracts of liver, kidneys and breast muscles by immunoaffinity column elution and HPLC-Fluorescent detection techniques. Feeing OTA contaminated diet resulted in a significant decrease in egg mass and egg quality parameters. Liver and kidneys showed characteristic lesions of ochratoxicosis. Residue concentration (ng/g of OTA in the hens fed 10 mg/kg OTA, was the highest in liver (26.336±1.16 followed by kidney (8.223±0.85 and were least in breast muscles (1.235±0.21. Embryonic mortalites were higher, while hatachabilites of the chicks were lower in the groups fed higher doses of OTA. Feeding OTA contaminated diets to breeder hen resulted in residues accumulation in their tissues along with significantly reduced production and breeding performance.

  16. Campylobacter epidemiology from breeders to their progeny in Eastern Spain.

    Science.gov (United States)

    Ingresa-Capaccioni, S; Jiménez-Trigos, E; Marco-Jiménez, F; Catalá, P; Vega, S; Marin, C

    2016-03-01

    While horizontal transmission is a route clearly linked to the spread of Campylobacter at the farm level, few studies support the transmission of Campylobacter spp. from breeder flocks to their offspring. Thus, the present study was carried out to investigate the possibility of vertical transmission. Breeders were monitored from the time of housing day-old chicks, then throughout the laying period (0 to 60 wk) and throughout their progeny (broiler fattening, 1 to 42 d) until slaughter. All samples were analyzed according with official method ISO 10272:2006. Results revealed that on breeder farms, Campylobacter isolation started from wk 16 and reached its peak at wk 26, with 57.0% and 93.2% of positive birds, respectively. After this point, the rate of positive birds decreased slightly to 86.0% at 60 wk. However, in broiler production all day-old chicks were found negative for Campylobacter spp, and the bacteria was first isolated at d 14 of age (5.0%), with a significant increase in detection during the fattening period with 62% of Campylobacter positive animals at the end of the production cycle. Moreover, non-positive sample was determined from environmental sources. These results could be explained because Campylobacter may be in a low concentration or in a non-culturable form, as there were several studies that successfully detected Campylobacter DNA, but failed to culture. This form can survive in the environment and infect successive flocks; consequently, further studies are needed to develop more modern, practical, cost-effective and suitable techniques for routine diagnosis. © 2016 Poultry Science Association Inc.

  17. The improvement of control rod in experimental fast reactor JOYO. The development of a sodium bonded type control rod

    Energy Technology Data Exchange (ETDEWEB)

    Soga, T.; Miyakawa, S.; Mitsugi, T. [Japan Nuclear Cycle Development Inst., Oarai Engineering Center, Irradiation Center, Irradiation and Administration Section, Oarai, Ibaraki (Japan)

    1999-06-01

    that the cladding strength sufficient to withstand stress accounting for decreased thickness by the ACCI zone. (5) The wet wash and storage method was selected for disposing of the spent sodium bonded control rods, based upon experimental results at the JOYO facilities. The effects from storing sodium bonded control rods in wet storage were evaluated. The results indicated that these effect would not pose a safety problem. (author)

  18. Selection for early response to photostimulation in broiler breeders.

    Science.gov (United States)

    Tyler, N C; Gous, R M

    2011-08-01

    1. To determine if selection for early response to photostimulation could be successful, 150 male broiler breeders were photostimulated at 8 weeks of age. The first 20 to produce a semen sample and have a reddened comb with an area > 10 cm2 were selected as responders (R) and 20 birds that did not show these signs of sexual development were chosen as non-responders (NR). Once sexually mature, 8 birds from each group that consistently produced a semen sample were mated with both egg-type hybrids and broiler breeder females to observe the response to 8-week photostimulation in the as-hatched offspring. 2. The AFE of the F1 females with NR or R paternity and egg-type hybrid layer maternity (F1L) were similar, but AFE was advanced in birds from R relative to NR paternity when they had broiler breeder maternity (F1B). 3. Date following a normal distribution of AFE were extracted from the overall data set. This group included offspring from both NR and R paternity, but AFE in F1L and F1B females with R paternity was advanced compared to those with NR paternity. 4. Mean testis weights, or age at most rapid testis growth predicted using parameters from Tyler and Gous (2009), of F1 males were not significantly different in birds with NR or R paternity. A strong correlation was found between predicted age at most rapid growth and AFE of full sibs and so it is likely that an advance in AFE in female offspring would also result in an advance in age of testis development of males. 5. There was no significant difference in 21-d body weight of F1B females of NR or R paternity, but the 21-d body weights of F1L females were higher from R than from NR sires, suggesting that although fertility and meat-type traits are often negatively correlated, there was no adverse effect of selection for responsiveness to early photostimulation and broiler growth rates to 21 d. 6. These findings showed that the response to early stimulation is heritable, and should be useful to the broiler breeder

  19. Uterine adenocarcinoma with transcoelomic metastases in breeder hens (Gallus domesticus

    Directory of Open Access Journals (Sweden)

    D. G. Bwala

    2011-04-01

    Full Text Available Hens involved in a Newcastle disease study were euthanased at regular intervals according to a designed protocol. Of these, 7.14%(n = 42 of the 82-week-old specific pathogen-free breeder hens were found to have well-delineated firm white to yellowish nodules of varying sizes in the abdominal cavity. Histologically, the nodules were identified as an adenocarcinoma originating in the uterus. Transcoelomic spread was evidenced by the presence of similar neoplastic cells embedded in the serosa and outer longitudinal muscle layer of the intestines as well as the liver.

  20. REKONFIGURASI JARING DISTRIBUSI TENAGA LISTRIK MENGGUNAKAN BREEDER GENETIC ALGORITHM (BGA

    Directory of Open Access Journals (Sweden)

    Cok. Gede Indra Partha

    2009-05-01

    Full Text Available Kebutuhan akan daya listrik saat ini semakin meningkat, seiring dengan perkembangan teknologi, cara hidup, kebutuhan dan budaya di daerah tersebut. Untuk itu keandalan dan kontinuitas pelayanan, sistem transmisidan distribusi perlu ditingkatkan untuk memperoleh pelayanan yang optimal dengan losses terendah. Padapenelitian ini digunakan metode Breeder Algoritma Genetika (BGA yang telah dikembangkan dalam optimasibeban seimbang untuk rekonfigurasi jaring distribusi tegangan menengah (JTM. Proses optimasi beban dilakukandengan cara merubah switch-switch pada penyulang (sebagai gen-gen dalam kromosom jaring distribusi sehinggadiperoleh jaring distribusi yang paling optimal. Hasil analisis menggunakan BGA menunjukkan konfigurasi baruyang optimal dengan losses terendah serta lebih cepat konvergen jika dibandingkan dengan Genetic Algorithm(GA biasa.

  1. Pebble fabrication of super advanced tritium breeders using a solid solution of Li2+xTiO3+y with Li2ZrO3

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Hoshino

    2016-12-01

    Full Text Available Lithium titanate with excess lithium (Li2+xTiO3+y is one of the most promising candidates among advanced tritium breeders for demonstration power plant reactors because of its good tritium release characteristics. However, the tritium breeding ratio (TBR of Li2+xTiO3+y is smaller than that of e.g., Li2O or Li8TiO6 because of its lower Li density. Therefore, new Li-containing ceramic composites with both high stability and high Li density have been developed. Thus, this study focused on the development of a solid solution with a new characteristic. The solid-solution pebbles of Li2+xTiO3+y with Li2ZrO3 (Li2+x(Ti,ZrO3+y, designated as LTZO, were fabricated by an emulsion method. The X-ray diffraction patterns of sintered LTZO pebbles are approximately the same as those of Li2+xTiO3+y pebbles, and no peaks attributable to Li2ZrO3 are observed. These results demonstrate that LTZO pebbles are not a two-phase material but rather a solid solution. Furthermore, LTZO pebbles were easily sintered under air. Thus, the LTZO solid solution is a candidate breeder material for super advanced (SA tritium breeders.

  2. Engineering development studies for molten-salt breeder reactor processing No. 22

    Energy Technology Data Exchange (ETDEWEB)

    Hightower, J.R. Jr. (comp.)

    1976-06-01

    Processing methods are being developed for use in a close-coupled facility for removing fission products, corrosion products, and fissile materials from the MSBR fuel. This report discusses the autoresistance heating for the continuous fluorinator, the metal transfer experiment, experiments for the salt-metal contactor, and fuel reconstitution. 10 fig. (DLC)

  3. AB INITIO STUDY OF ADVANCED METALLIC NUCLEAR FUELS FOR FAST BREEDER REACTORS

    Energy Technology Data Exchange (ETDEWEB)

    Landa, A; Soderlind, P; Grabowski, B; Turchi, P A; Ruban, A V; Vitos, L

    2012-04-23

    Density-functional formalism is applied to study the ground state properties of {gamma}-U-Zr and {gamma}-U-Mo solid solutions. Calculated heats of formation are compared with CALPHAD assessments. We discuss how the heat of formation in both alloys correlates with the charge transfer between the alloy components. The decomposition curves for {gamma}-based U-Zr and U-Mo solid solutions are derived from Ising-type Monte Carlo simulations. We explore the idea of stabilization of the {delta}-UZr{sub 2} compound against the {alpha}-Zr (hcp) structure due to increase of Zr d-band occupancy by the addition of U to Zr. We discuss how the specific behavior of the electronic density of states in the vicinity of the Fermi level promotes the stabilization of the U{sub 2}Mo compound. The mechanism of possible Am redistribution in the U-Zr and U-Mo fuels is also discussed.

  4. Seismic design technology for breeder reactor structures. Volume 1. Special topics in earthquake ground motion

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This report is divided into twelve chapters: seismic hazard analysis procedures, statistical and probabilistic considerations, vertical ground motion characteristics, vertical ground response spectrum shapes, effects of inclined rock strata on site response, correlation of ground response spectra with intensity, intensity attenuation relationships, peak ground acceleration in the very mean field, statistical analysis of response spectral amplitudes, contributions of body and surface waves, evaluation of ground motion characteristics, and design earthquake motions. (DLC)

  5. Conceptual Design Studies of a Passively Safe Thorium Breeder Pebble Bed Reactor

    NARCIS (Netherlands)

    Wols, F.J.

    2015-01-01

    Nuclear power plants are expected to play an important role in the worldwide electricity production in the coming decades, since they provide an economically attractive, reliable and low-carbon source of electricity with plenty of resources available for at least the coming hundreds of years.

  6. Feasibility studies for production of {sup 89}Sr in the Fast Breeder Test Reactor (FBTR)

    Energy Technology Data Exchange (ETDEWEB)

    Saha, Debasish; Vithya, J.; Ashok Kumar, G.V.S.; Swaminathan, K.; Kumar, R.; Venkata Subramani, C.R.; Vasudeva Rao, P.R. [Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam (India). Fuel Chemistry Div.

    2013-07-01

    {sup 89}Sr, a pure beta emitter with half life of 50.53 d is used as its chloride solution for palliative care of bone metastases. This paper describes the feasibility studies that have been conducted at FBTR, IGCAR for production of this radionuclide using the {sup 89}Y(n, p){sup 89}Sr reaction. Yttria pellets were irradiated in a special subassembly at the core centre for a total of 73 d in two steps of 35 d and 38 d with a time gap of 38 d. The irradiated yttria target was dissolved in nitric acid and the bulk Y was separated by solvent extraction using the TBP-HNO{sub 3} complex. The {sup 89}Sr fraction was purified using the cation exchange resin DOWEX 50W x 8 (100-200 mesh size) from the other radioactive impurities seen. The eluted {sup 89}Sr fraction was assayed using a GM counting system. The {sup 89}Sr activity produced in 1 g of yttria pellet was found to be 19 mCi. (orig.)

  7. Large scale breeder reactor plant prototype mechanical pump conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    This report includes engineering memorandums, drawings, key feature descriptions, and other data. Some of the reports, such as manufacturability and some stress analysis, were done by consultants for Byron Jackson. Review of this report indicates that the design is feasible. The pump can be manufactured to system and specification requirements. The overall length and weight of some pieces will require special consideration, but is within the scope of equipment and technology available today. The fabricated parts are large and heavy, but can be manufactured and machined. Only the high temperature is unique to this size, since previous sodium pumps were smaller. Nondestructive tests as required by the Code are described and are feasible. The performance test of the prototype has been studied thoroughly. It is feasible for a cold water test. There are some problem areas. However, all of them can be solved. Development needs include building and testing a small scale model.

  8. Gas cooled fast breeder reactor design for a circulator test facility (modified HTGR circulator test facility)

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    A GCFR helium circulator test facility sized for full design conditions is proposed for meeting the above requirements. The circulator will be mounted in a large vessel containing high pressure helium which will permit testing at the same power, speed, pressure, temperature and flow conditions intended in the demonstration plant. The electric drive motor for the circulator will obtain its power from an electric supply and distribution system in which electric power will be taken from a local utility. The conceptual design decribed in this report is the result of close interaction between the General Atomic Company (GA), designer of the GCFR, and The Ralph M. Parson Company, architect/engineer for the test facility. A realistic estimate of total project cost is presented, together with a schedule for design, procurement, construction, and inspection.

  9. Present status and trend of development of operation and maintenance techniques of fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Ozawa, Kenji; Yamashita, Yoshioki; Sunaoshi, Hiroshi

    1987-10-01

    Recently, accompanying the conspicuous improvement of the reliability and economical efficiency of LWRs, the level of attaining the high order technology required for FBRs has become high. The largest subject of FBRs is to heighten the economical efficiency while ensuring the safety, and many technical developments such as the heightening of the performance of FBR fuel, the shortening of pipings, the omission of secondary system and the rationalization of containment vessels have been carried out. Also the improvement of the capacity factor including the shortening of regular inspection period is important in addition to the safe and stable operation of FBRs, and it is necessary to upgrade the operation and maintenance techniques. The features of the operation and maintenance techniques of FBRs, the concept of the protection with deep strata in the operation techniques, the upgrading of the operation procedure at the time of abnormality, the development of operation-assisting systems, the upgrading of the education and training on operation, the shortening of regular inspection period, the techniques for reducing radiation exposure, the elucidation of the behavior of corrosion products, the international cooperation and others are described. (Kako, I.).

  10. An axially multilayered low void worth liquid-metal fast breeder reactor core concept

    Energy Technology Data Exchange (ETDEWEB)

    Kamei, T.; Yamaoka, M. (Toshiba Corp., Nuclear Engineering Lab., 4-1 Ukishima-cho, Kawasaki-ku, Kawasaki-shi 210 (JP))

    1992-03-01

    A new core concept with a negative sodium void reactivity coefficient has evolved. The core is composed of two core layers in the axial direction. The core layers are separated by an internal blanket, the central region of which comprises a neutron-absorbing material such as boron carbide or tantalum. Consequently, the two core layers are completely decoupled as regards neutronics, leading to an effective increase in neutron leakage from the core region when sodium is voided. This design is expected to be free from the disadvantages of a large core radius, as seen in a conventional spoiled core such as a pancake core. In this paper the design is described in detail, and its application to a 300-MW (electronic) metal fuel core and to a 450-MW (electric) minor actinide burned core is given as an example.

  11. REACTOR COOLING

    Science.gov (United States)

    Quackenbush, C.F.

    1959-09-29

    A nuclear reactor with provisions for selectively cooling the fuel elements is described. The reactor has a plurality of tubes extending throughout. Cylindrical fuel elements are disposed within the tubes and the coolant flows through the tubes and around the fuel elements. The fuel elements within the central portion of the reactor are provided with roughened surfaces of material. The fuel elements in the end portions of the tubes within the reactor are provlded with low conduction jackets and the fuel elements in the region between the central portion and the end portions are provided with smooth surfaces of high heat conduction material.

  12. ALGERIAN SHEEP ARE NONSEASONAL BREEDERS: "CLINICAL, CYTOLOGICAL AND HISTOLOGICAL STUDIES"

    Directory of Open Access Journals (Sweden)

    A NIAR

    2001-12-01

    Full Text Available 4377 pregnant ewes have been used in this study to realise a curve of lambing. This curve prove that the three most important breeds of Algerian sheep can breed all year round.                 To prove also that Algerian sheep are no  seasonal breeder, a cytological and histological study of ewes vaginal mucosa have been done. The exfoliative cytology over all the phases of the oestrous cycle and pregnancy consistent in appearance and appear to be influenced directly by the changes in endogenous ovarian steroid hormones. The histological features of the anterior vaginal epithelium of the ewe sampled all year round, before, during, after oestrus and at pregnancy are described. In the present study, we have never found an arrest of the cyclical genital activity of ewes at any moment of the year. This finding agree with results of the curve of lambing. We can conclude that Algerian ewes are nonseasonal breeders.

  13. Humans are not cooperative breeders but practice biocultural reproduction.

    Science.gov (United States)

    Bogin, Barry; Bragg, Jared; Kuzawa, Christopher

    2014-01-01

    Alloparental care and feeding of young is often called "cooperative breeding" and humans are increasingly described as being a cooperative breeding species. To critically evaluate whether the human offspring care system is best grouped with that of other cooperative breeders. (1) Review of the human system of offspring care in the light of definitions of cooperative, communal and social breeding; (2) re-analysis of human lifetime reproductive effort. Human reproduction and offspring care are distinct from other species because alloparental behaviour is defined culturally rather than by genetic kinship alone. This system allows local flexibility in provisioning strategies and ensures that care and resources often flow between unrelated individuals. This review proposes the term "biocultural reproduction" to describe this unique human reproductive system. In a re-analysis of human life history data, it is estimated that the intense alloparenting typical of human societies lowers the lifetime reproductive effort of individual women by 14-29% compared to expectations based upon other mammals. Humans are not cooperative breeders as classically defined; one effect of the unique strategy of human biocultural reproduction is a lowering of human lifetime reproductive effort, which could help explain lifespan extension.

  14. Nuclear reactor for breeding U.sup.233

    Science.gov (United States)

    Bohanan, Charles S.; Jones, David H.; Raab, Jr., Harry F.; Radkowsky, Alvin

    1976-01-01

    A light-water-cooled nuclear reactor capable of breeding U.sup.233 for use in a light-water breeder reactor includes physically separated regions containing U.sup.235 fissile material and U.sup.238 fertile material and Th.sup.232 fertile material and Pu.sup.239 fissile material, if available. Preferably the U.sup.235 fissile material and U.sup.238 fertile material are contained in longitudinally movable seed regions and the Pu.sup.239 fissile material and Th.sup.232 fertile material are contained in blanket regions surrounding the seed regions.

  15. Multifunctional reactors

    NARCIS (Netherlands)

    Westerterp, K.R.

    1992-01-01

    Multifunctional reactors are single pieces of equipment in which, besides the reaction, other functions are carried out simultaneously. The other functions can be a heat, mass or momentum transfer operation and even another reaction. Multifunctional reactors are not new, but they have received much

  16. Is there peripheral or ovarian insulin action alteration in broiler breeder hens fed ad libitum?

    Science.gov (United States)

    Métayer, S; Tesseraud, S; Cassy, S; Taouis, M; Williams, J; Picard, M; Rideau, N

    2006-06-01

    We investigated whether a change in peripheral glucose homeostasis, a local change in the insulin-related ovarian regulatory system, or both occurred in ad libitum-fed broiler breeder hens compared with feed-restricted counterparts. Feed-restricted (R, from 5 to 16 wk of age) and ad libitum-fed (A) hens from a standard commercial line (S) and an experimental dwarf genotype (E) were studied. Basal and stimulated plasma insulin and glucose concentrations were measured during the prebreeding and laying periods. In the basal state (after 16 h fasting) plasma glucose concentrations were significantly lower in SA chickens (-5% at 17 wk, -7.5% at 32 wk) compared with EA, SR, and ER chickens, with no difference in plasma insulin concentrations (n = 16). In 17-wk-old SA birds, 30 min after oral glucose loading, plasma glucose concentrations increased significantly compared with the basal state and were also significantly lower as compared with SR but did not differ significantly from EA and ER. Plasma insulin concentrations did not differ significantly between genotypes or regimens (n = 16). A potential modification of intracellular mediators involved in the regulation of cell growth and survival in small follicles that were overrecruited in SA compared with SR was also investigated in SA and SR hens at 32 wk. There was no effect of food restriction in phospho-Akt, Akt, phospho-ERK, and phospho-S6 in the small white ovarian follicles (n = 6) in the basal state and after 30 min of refeeding. In conclusion, the present study does not demonstrate any evidence of glucose intolerance during the prebreeding period, specific change in the ovarian small follicle insulin signalling pathway, or both, in laying broiler breeders fed ad libitum compared with feed-restricted hens.

  17. Development and trial manufacturing of 1/2-scale partial mock-up of blanket box structure for fusion experimental reactor

    Science.gov (United States)

    Hashimoto, Toshiyuki; Takatsu, Hideyuki; Sato, Satoshi

    1994-07-01

    Conceptual design of breeding blanket has been discussed during the CDA (Conceptual Design Activities) of ITER (International Thermonuclear Experimental Reactor). Structural concept of breeding blanket is based on box structure integrated with first wall and shield, which consists of three coolant manifolds for first wall, breeding and shield regions. The first wall must have cooling channels to remove surface heat flux and nuclear heating. The box structure includes plates to form the manifolds and stiffening ribs to withstand enormous electromagnetic load, coolant pressure and blanket internal (purge gas) pressure. A 1/2-scale partial model of the blanket box structure for the outboard side module near midplane is manufactured to estimate the fabrication technology, i.e. diffusion bonding by HIP (Hot Isostatic Pressing) and EBW (Electron Beam Welding) procedure. Fabrication accuracy is a key issue to manufacture first wall panel because bending deformation during HIP may not be small for a large size structure. Data on bending deformation during HIP was obtained by preliminary manufacturing of HIP elements. For the shield structure, it is necessary to reduce the welding strain and residual stress of the weldment to establish the fabrication procedure. Optimal shape of the parts forming the manifolds, welding locations and welding sequence have been investigated. In addition, preliminary EBW tests have been performed in order to select the EBW conditions, and fundamental data on built-up shield have been obtained. Especially, welding deformation by joining the first wall panel to the shield has been measured, and total deformation to build-up shield by EBW has been found to be smaller than 2 mm. Consequently, the feasibility of fabrication technologies has been successfully demonstrated for a 1m-scaled box structure including the first wall with cooling channels by means of HIP, EBW and TIG (Tungsten Inert Gas arc)-welding.

  18. Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor.

    Science.gov (United States)

    Singh, M J; De Esch, H P L

    2010-01-01

    This paper describes the physics design of a 100 keV, 60 A H(-) accelerator for the diagnostic neutral beam (DNB) for international tokamak experimental reactor (ITER). The accelerator is a three grid system comprising of 1280 apertures, grouped in 16 groups with 80 apertures per beam group. Several computer codes have been used to optimize the design which follows the same philosophy as the ITER Design Description Document (DDD) 5.3 and the 1 MeV heating and current drive beam line [R. Hemsworth, H. Decamps, J. Graceffa, B. Schunke, M. Tanaka, M. Dremel, A. Tanga, H. P. L. De Esch, F. Geli, J. Milnes, T. Inoue, D. Marcuzzi, P. Sonato, and P. Zaccaria, Nucl. Fusion 49, 045006 (2009)]. The aperture shapes, intergrid distances, and the extractor voltage have been optimized to minimize the beamlet divergence. To suppress the acceleration of coextracted electrons, permanent magnets have been incorporated in the extraction grid, downstream of the cooling water channels. The electron power loads on the extractor and the grounded grids have been calculated assuming 1 coextracted electron per ion. The beamlet divergence is calculated to be 4 mrad. At present the design for the filter field of the RF based ion sources for ITER is not fixed, therefore a few configurations of the same have been considered. Their effect on the transmission of the electrons and beams through the accelerator has been studied. The OPERA-3D code has been used to estimate the aperture offset steering constant of the grounded grid and the extraction grid, the space charge interaction between the beamlets and the kerb design required to compensate for this interaction. All beamlets in the DNB must be focused to a single point in the duct, 20.665 m from the grounded grid, and the required geometrical aimings and aperture offsets have been calculated.

  19. Microstructural characterization and model of hardening for the irradiated austenitic stainless steels of the internals of pressurized water reactors; Caracterisation microstructurale et modelisation du durcissement des aciers austenitiques irradies des structures internes des reacteurs a eau pressurisee

    Energy Technology Data Exchange (ETDEWEB)

    Pokor, C

    2003-07-01

    The core internals of Pressurized Water Reactors (PWR) are composed of SA 304 stainless steel plates and CW 316 stainless steel bolts. These internals undergo a neutron flux at a temperature between 280 deg C and 380 deg C which modifies their mechanical properties. These modifications are due to the changes in the microstructure of these materials under irradiation which depend on flux, dose and irradiation temperature. We have studied, by Transmission Electron Microscopy, the microstructure of stainless steels SA 304, CW 316 and CW 316Ti irradiated in a mixed flux reactor (OSIRIS at 330 deg C between 0,8 dpa et 3,4 dpa) and in a fast breeder reactor at 330 deg C (BOR-60) up to doses of 40 dpa. Moreover, samples have been irradiated at 375 deg C in a fast breeder reactor (EBR-II) up to doses of 10 dpa. The microstructure of the irradiated stainless steels consists in faulted Frank dislocation loops in the [111] planes of austenitic, with a Burgers vector of [111]. It is possible to find some voids in the solution annealed samples irradiated at 375 deg C. The evolution of the dislocations loops and voids has been simulated with a 'cluster dynamic' model. The fit of the model parameters has allowed us to have a quantitative description of our experimental results. This description of the microstructure after irradiation was coupled together with a hardening model by Frank loops that has permitted us to make a quantitative description of the hardening of SA 304, CW 316 and CW 316Ti stainless steels after irradiation at a certain dose, flux and temperature. The irradiation doses studied grow up to 90 dpa, dose of the end of life of PWR internals. (author)

  20. Gas Reactor International Cooperative Program. Interim report. Construction and operating experience of selected European Gas-Cooled Reactors

    Energy Technology Data Exchange (ETDEWEB)

    1978-09-01

    The construction and operating experience of selected European Gas-Cooled Reactors is summarized along with technical descriptions of the plants. Included in the report are the AVR Experimental Pebble Bed Reactor, the Dragon Reactor, AGR Reactors, and the Thorium High Temperature Reactor (THTR). The study demonstrates that the European experience has been favorable and forms a good foundation for the development of Advanced High Temperature Reactors.

  1. Inclusion of canthaxanthin and 25-hydroxycholecalciferol in the diet of broiler breeders on performance and incubation parameters

    Directory of Open Access Journals (Sweden)

    Vinicius Duarte

    2015-11-01

    Full Text Available The objective of this experiment was to evaluate the effects of a diet containing canthaxanthin and 25-hydroxycholecalciferol (25-OH-D3 on the production and reproductive performances of Cobb 500 broiler breeders aged 53 to 61 weeks. The study included 36,000 Cobb 500 female and 3,600 male broiler breeders aging 51 weeks. The birds were housed in three poultry houses divided into four plots, totaling 12 experimental units each containing 3,000 females and 300 males. The birds received the following treatments: control diet (without the studied additives or the control diet with the addition of 60mg kg-1feed of 25-(OH-D3 and canthaxanthin feed (6mg of canthaxanthin and 2,760,000IU of 25-(OH-D3 per kg of feed per the supplier's recommendations. The experimental design used was a randomized complete block design with two treatments and six replicates. The results were subjected to analysis of variance followed by the F-test. The treatments had no effect on egg production, usability of eggs and number of incubatable eggs per bird housed. The inclusion of canthaxanthin and 25-(OH-D3 in the diet reduced embryonic mortality while increasing egg yolk pigmentation, hatching percentage, and number of viable chicks produced per bird. Therefore, the use of 60mg kg-1of 25-(OH-D3 plus canthaxanthin is recommended in the diet of Cobb 500 broiler breeders aging 53 to 61 weeks to improve important reproductive traits that have great economic impacts on poultry farms

  2. Effects of breeder age, strain, and eggshell temperature on nutrient metabolism of broiler embryos

    NARCIS (Netherlands)

    Nangsuay, A.; Meijerhof, R.; Anker-Hensen, van den I.; Heetkamp, M.J.W.; Kemp, B.; Brand, van den H.

    2017-01-01

    Breeder age and broiler strain influence the availability of nutrients and oxygen through yolk size and eggshell conductance, and the effects of these egg characteristics on nutrient metabolism might be influenced by eggshell temperature (EST). This study aims to determine effects of breeder age,

  3. Egg fertility and hatchability in Avians broiler-breeder hens under ...

    African Journals Online (AJOL)

    Impact of temperature and humidity in different month of lay was evaluated on fertility and hatchability in broiler breeder hens reared in Sapele, Nigeria. Six million, six hundred and nineteen thousand, seven hundred and forty six eggs from flocks of Avians broiler-breeder hens reared between 2005 and 2006 in a farm ...

  4. Enhancing the growth performance of replacement female breeder goats through modification of feeding program

    Directory of Open Access Journals (Sweden)

    A. A. A. Ghani

    2017-06-01

    Full Text Available Aim: The study was conducted at a smallholder goat farm located in Labu, Negeri Sembilan, Malaysia. The objective of this study was to evaluate the effect of proper feeding program on growth performances of replacement breeder goats. Materials and Methods: A total of 30 healthy female boer cross goats at the age of 4 months old with average initial live body weight (BW of 20.05±0.5 kg were used for on-farm feeding trial to evaluate the growth performance as preparation for breeding purposes. The experimental goats were divided into two groups of 15 animals each labeled as control and treatment groups, which were kept under intensive farming system. Goats in control group were fed with normal routine feeding protocol practiced by the farmer, while goats in the treatment group were fed with new feed formulation. Throughout the experimental period, on-farm monitoring and data collection were carried out. Initial BW and body condition score (BCS were recorded before the start of the experiment while final BW and BCS were gained after 7 months of the experimental period. Average daily gain (ADG was calculated after the experiment end. Data on BW, ADG, and BCS were recorded from both groups for every 2 weeks and reported monthly. The feed intake for the control group was 2.8 kg/animal/day which practiced by the farmer and 3.2 kg/animal/day as new feed formulation for the treatment group. Results: After 7 months of the experimental period, final BW shows an improvement in treatment group (39.1±1.53 kg compared with control group (32.3±1.23 kg. The ADG in treatment group also gives promising result when comparing with control group. Goats in treatment group significantly attained better ADG than control group which were 126.7 g/day and 83.3 g/day, respectively. For the BCS, goats in the treatment group had shown an improvement where 86.67% (13 out of 15 of the group had BCS =3 (1-5 scoring scale and only 66.67% (10 out of 15 of the control group had

  5. Impacts of breeder loss on social structure, reproduction and population growth in a social canid.

    Science.gov (United States)

    Borg, Bridget L; Brainerd, Scott M; Meier, Thomas J; Prugh, Laura R

    2015-01-01

    The importance of individuals to the dynamics of populations may depend on reproductive status, especially for species with complex social structure. Loss of reproductive individuals in socially complex species could disproportionately affect population dynamics by destabilizing social structure and reducing population growth. Alternatively, compensatory mechanisms such as rapid replacement of breeders may result in little disruption. The impact of breeder loss on the population dynamics of social species remains poorly understood. We evaluated the effect of breeder loss on social stability, recruitment and population growth of grey wolves (Canis lupus) in Denali National Park and Preserve, Alaska using a 26-year dataset of 387 radiocollared wolves. Harvest of breeding wolves is a highly contentious conservation and management issue worldwide, with unknown population-level consequences. Breeder loss preceded 77% of cases (n = 53) of pack dissolution from 1986 to 2012. Packs were more likely to dissolve if a female or both breeders were lost and pack size was small. Harvest of breeders increased the probability of pack dissolution, likely because the timing of harvest coincided with the breeding season of wolves. Rates of denning and successful recruitment were uniformly high for packs that did not experience breeder loss; however, packs that lost breeders exhibited lower denning and recruitment rates. Breeder mortality and pack dissolution had no significant effects on immediate or longer term population dynamics. Our results indicate the importance of breeding individuals is context dependent. The impact of breeder loss on social group persistence, reproduction and population growth may be greatest when average group sizes are small and mortality occurs during the breeding season. This study highlights the importance of reproductive individuals in maintaining group cohesion in social species, but at the population level socially complex species may be resilient

  6. Effects of breeder turnover and harvest on group composition and recruitment in a social carnivore

    Science.gov (United States)

    Ausband, David E.; Mitchell, Michael S.; Waits, Lisette P.

    2017-01-01

    Breeder turnover can influence population growth in social carnivores through changes to group size, composition and recruitment.Studies that possess detailed group composition data that can provide insights about the effects of breeder turnover on groups have generally been conducted on species that are not subject to recurrent annual human harvest. We wanted to know how breeder turnover affects group composition and how harvest, in turn, affects breeder turnover in cooperatively breeding grey wolves (Canis lupus Linnaeus 1758).We used noninvasive genetic sampling at wolf rendezvous sites to construct pedigrees and estimate recruitment in groups of wolves before and after harvest in Idaho, USA.Turnover of breeding females increased polygamy and potential recruits per group by providing breeding opportunities for subordinates although resultant group size was unaffected 1 year after the turnover. Breeder turnover had no effect on the number of nonbreeding helpers per group. After breeding male turnover, fewer female pups were recruited in the new males’ litters. Harvest had no effect on the frequency of breeder turnover.We found that breeder turnover led to shifts in the reproductive hierarchies within groups and the resulting changes to group composition were quite variable and depended on the sex of the breeder lost. We hypothesize that nonbreeding females direct help away from non-kin female pups to preserve future breeding opportunities for themselves. Breeder turnover had marked effects on the breeding opportunities of subordinates and the number and sex ratios of subsequent litters of pups. Seemingly subtle changes to groups, such as the loss of one individual, can greatly affect group composition, genetic content, and short-term population growth when the individual lost is a breeder.

  7. Effects of breeder turnover and harvest on group composition and recruitment in a social carnivore.

    Science.gov (United States)

    Ausband, David E; Mitchell, Michael S; Waits, Lisette P

    2017-09-01

    Breeder turnover can influence population growth in social carnivores through changes to group size, composition and recruitment. Studies that possess detailed group composition data that can provide insights about the effects of breeder turnover on groups have generally been conducted on species that are not subject to recurrent annual human harvest. We wanted to know how breeder turnover affects group composition and how harvest, in turn, affects breeder turnover in cooperatively breeding grey wolves (Canis lupus Linnaeus 1758). We used noninvasive genetic sampling at wolf rendezvous sites to construct pedigrees and estimate recruitment in groups of wolves before and after harvest in Idaho, USA. Turnover of breeding females increased polygamy and potential recruits per group by providing breeding opportunities for subordinates although resultant group size was unaffected 1 year after the turnover. Breeder turnover had no effect on the number of nonbreeding helpers per group. After breeding male turnover, fewer female pups were recruited in the new males' litters. Harvest had no effect on the frequency of breeder turnover. We found that breeder turnover led to shifts in the reproductive hierarchies within groups and the resulting changes to group composition were quite variable and depended on the sex of the breeder lost. We hypothesize that nonbreeding females direct help away from non-kin female pups to preserve future breeding opportunities for themselves. Breeder turnover had marked effects on the breeding opportunities of subordinates and the number and sex ratios of subsequent litters of pups. Seemingly subtle changes to groups, such as the loss of one individual, can greatly affect group composition, genetic content, and short-term population growth when the individual lost is a breeder. © 2017 The Authors. Journal of Animal Ecology © 2017 British Ecological Society.

  8. Design study of an upgraded charge breeder for ISOLDE

    CERN Document Server

    Shornikov, A; Wenander, F; Pikin, A

    2013-01-01

    In this work we present our progress in the design study of a new Electron Beam Ion Source (EBIS) to be installed as a charge breeder for reacceleration of rare ions at ISOLDE. The work is triggered by the HIE-ISOLDE upgrade {[}1] and the planned TSR@ISOLDE project {[}2]. To fulfill the requests of the user community the new EBIS should reach an electron beam density of 10(4) A/cm(2) at electron energies up to 150 key and, provide UHV environment and ion cooling in the breeding region to ensure confinement of the ions long enough to reach the requested charge states. We report on the established design parameters and first prototyping steps towards production and testing of suitable equipment. (C) 2013 Elsevier B.V. All rights reserved.

  9. Radiocesium in reindeer breeders in Northern Norway since 1965

    Energy Technology Data Exchange (ETDEWEB)

    Selnaes, T.D. [Institutt for Energiteknikk, Kjeller (Norway); Strand, P. [Statens Straalevern, Oesteraas (Norway)

    1995-12-31

    Reindeer breeders in Kautokeino, Northern Norway, have been monitored for whole body content of {sup 137}Cs every years since 1965. The group was chosen because of it`s large intake of reindeer meat (65 kg/year). The same group has been monitored throughout the years. Some supplements have been made, to maintain the average age within the group. Whole body countings have been performed with a scintillation detector and i single- or multichannel analyzer. The highest values were monitored in 1966, when the average body content of {sup 137}Cs was 39,500 Bq for men, and 18,600 Bq for women. Whole body contents are today around 2,000 Bq, giving a calculated whole body dose of 0.1 mSv/year. 5 refs., 4 figs.

  10. Relationship between ecological concepts and biosafety in broiler breeder farms

    Directory of Open Access Journals (Sweden)

    CA Santos

    2007-09-01

    Full Text Available The entrance of poultry products into the trade world requires changes in the configuration of these products, such as programs that ensure their quality and biosafety for the consumers. This article aims at presenting new perception on poultry biosafety programs in broiler breeder farms from an ecological perspective, making these programs more efficient and cost-effective, i.e., more competitive. Using literature review, some convergences were found between ecology concepts and biosafety programs. One of these convergences is understanding the farm as an open ecosystem, integrating through adaptation the natural environment with the exotic environment. This also allows understanding how the production area interacts with the environment as to energy substrate input and output or as to the dissemination of poultry pathogens by vectors outside the farm or from the production area to the environment. This allows building a theoretical reference for further studies on ecological models for the improvement of poultry biosafety programs.

  11. BRENDA: a dynamic simulator for a sodium-cooled fast reactor power plant

    Energy Technology Data Exchange (ETDEWEB)

    Hetrick, D.L.; Sowers, G.W.

    1978-06-01

    This report is a users' manual for one version of BRENDA (Breeder Reactor Nuclear Dynamic Analysis), which is a digital program for simulating the dynamic behavior of a sodium-cooled fast reactor power plant. This version, which contains 57 differential equations, represents a simplified model of the Clinch River Breeder Reactor Project (CRBRP). BRENDA is an input deck for DARE P (Differential Analyzer Replacement, Portable), which is a continuous-system simulation language developed at the University of Arizona. This report contains brief descriptions of DARE P and BRENDA, instructions for using BRENDA in conjunction with DARE P, and some sample output. A list of variable names and a listing for BRENDA are included as appendices.

  12. A three-dimensional numerical modelling of the PHOENIX-SPES charge breeder based on the Langevin formalism

    Science.gov (United States)

    Galatà, A.; Mascali, D.; Neri, L.; Torrisi, G.; Celona, L.

    2016-02-01

    A Charge Breeder (CB) is a crucial device of an ISOL facility, allowing post-acceleration of radioactive ions: it accepts an incoming 1+ beam, then multiplying its charge with a highly charged q+ beam as an output. The overall performances of the facility (intensity and attainable final energy) critically depend on the charge breeder optimization. Experimental results collected along the years confirm that the breeding process is still not fully understood and room for improvements still exists: a new numerical approach has been therefore developed and applied to the description of a 85Rb1+ beam capture by the plasma of the 14.5 GHz PHOENIX ECR-based CB, installed at the Laboratoire de Physique Subatomique et de Cosmologie (LPSC), and adopted for the Selective Production of Exotic Species project under construction at Laboratori Nazionali di Legnaro. The results of the numerical simulations, obtained implementing a plasma-target model of increasing accuracy and different values for the plasma potential, will be described along the paper: results very well agree with the theoretical predictions and with the experimental results obtained on the LPSC test bench.

  13. A three-dimensional numerical modelling of the PHOENIX-SPES charge breeder based on the Langevin formalism

    Energy Technology Data Exchange (ETDEWEB)

    Galatà, A., E-mail: alessio.galata@lnl.infn.it [INFN–Laboratori Nazionali di Legnaro, Viale dell’Università 2, 35020 Legnaro, Padova (Italy); Mascali, D.; Neri, L.; Torrisi, G.; Celona, L. [INFN–Laboratori Nazionali del Sud, Via S. Sofia 62, 95123 Catania (Italy)

    2016-02-15

    A Charge Breeder (CB) is a crucial device of an ISOL facility, allowing post-acceleration of radioactive ions: it accepts an incoming 1+ beam, then multiplying its charge with a highly charged q+ beam as an output. The overall performances of the facility (intensity and attainable final energy) critically depend on the charge breeder optimization. Experimental results collected along the years confirm that the breeding process is still not fully understood and room for improvements still exists: a new numerical approach has been therefore developed and applied to the description of a {sup 85}Rb{sup 1+} beam capture by the plasma of the 14.5 GHz PHOENIX ECR-based CB, installed at the Laboratoire de Physique Subatomique et de Cosmologie (LPSC), and adopted for the Selective Production of Exotic Species project under construction at Laboratori Nazionali di Legnaro. The results of the numerical simulations, obtained implementing a plasma-target model of increasing accuracy and different values for the plasma potential, will be described along the paper: results very well agree with the theoretical predictions and with the experimental results obtained on the LPSC test bench.

  14. NUCLEAR REACTOR

    Science.gov (United States)

    Miller, H.I.; Smith, R.C.

    1958-01-21

    This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

  15. Comparison of numerical results with experimental data for single-phase natural convection in an experimental sodium loop. [LMFBR

    Energy Technology Data Exchange (ETDEWEB)

    Ribando, R.J.

    1979-01-01

    A comparison is made between computed results and experimental data for a single-phase natural convection test in an experimental sodium loop. The test was conducted in the Thermal-Hydraulic Out-of-Reactor Safety (THORS) facility, an engineering-scale high temperature sodium loop at the Oak Ridge National Laboratory (ORNL) used for thermal-hydraulic testing of simulated Liquid Metal Fast Breeder Reactor (LMFBR) subassemblies at normal and off-normal operating conditions. Heat generation in the 19 pin assembly during the test was typical of decay heat levels. The test chosen for analysis in this paper was one of seven natural convection runs conducted in the facility using a variety of initial conditions and testing parameters. Specifically, in this test the bypass line was open to simulate a parallel heated assembly and the test was begun with a pump coastdown from a small initial forced flow. The computer program used to analyze the test, LONAC (LOw flow and NAtural Convection) is an ORNL-developed, fast-running, one-dimensional, single-phase, finite-difference model used for simulating forced and free convection transients in the THORS loop.

  16. NUCLEAR REACTOR

    Science.gov (United States)

    Grebe, J.J.

    1959-07-14

    High temperature reactors which are uniquely adapted to serve as the heat source for nuclear pcwered rockets are described. The reactor is comprised essentially of an outer tubular heat resistant casing which provides the main coolant passageway to and away from the reactor core within the casing and in which the working fluid is preferably hydrogen or helium gas which is permitted to vaporize from a liquid storage tank. The reactor core has a generally spherical shape formed entirely of an active material comprised of fissile material and a moderator material which serves as a diluent. The active material is fabricated as a gas permeable porous material and is interlaced in a random manner with very small inter-connecting bores or capillary tubes through which the coolant gas may flow. The entire reactor is divided into successive sections along the direction of the temperature gradient or coolant flow, each section utilizing materials of construction which are most advantageous from a nuclear standpoint and which at the same time can withstand the operating temperature of that particular zone. This design results in a nuclear reactor characterized simultaneously by a minimum critiral size and mass and by the ability to heat a working fluid to an extremely high temperature.

  17. Improved Performance of Broilers and Broiler Breeders Associated with an Amended Vaccination Program Against Reovirosis.

    Science.gov (United States)

    De Herdt, Peter; Broeckx, Marlies; Van Driessche, Filip; Vermeiren, Bart; Van Den Abeele, Geert; Van Gorp, Stefaan

    2016-12-01

    A vertically integrated monitoring program was set up for breeders hatched in 2013 and their offspring to detect differences in performance related to the reovirus vaccination schedule. Within the same organization in Belgium, 17 breeder flocks were vaccinated with one dose of live and one dose of inactivated reovirus vaccine, while 14 flocks received two doses of inactivated vaccine without live priming. The hatchability of the eggs produced by these birds was examined. Further, the daily growth, feed conversion, mortality, slaughterhouse condemnation, production index, and antibiotic use were monitored in 110 broiler flocks derived from the breeders. All gathered data were examined statistically. In eggs obtained from breeders vaccinated twice with inactivated reovirus vaccine, a significant 2.88% higher hatchability rate was observed. The progeny broiler flocks of these breeders showed a significant 18.2% lower mortality during the fattening period. Although not statistically significant, the slaughterhouse condemnation rate was 10.1% lower as well. The results may indicate that-under the epidemiologic conditions of this study-double administration of inactivated reovirus vaccine in broiler breeders can at least contribute to higher hatchability of breeder eggs and lower broiler mortality.

  18. Experimental data and numerical predictions of a single-phase flow in a batch square stirred tank reactor with a rotating cylinder agitator

    Science.gov (United States)

    Escamilla-Ruíz, I. A.; Sierra-Espinosa, F. Z.; García, J. C.; Valera-Medina, A.; Carrillo, F.

    2017-09-01

    Single-phase flows in stirred tank reactors have useful characteristics for a wide number of industrial applications. Usually, reactors are cylindrical vessels and complex impeller designs, which are often highly energy consuming and produce complicated flow patterns. Therefore, a novel configuration consisting of a square stirred tank reactor is proposed in this study with potential advantages over conventional reactors. In the present work hydrodynamics and turbulence have been studied for a single-phase flow in steady state operating in batch condition. The flow was induced by drag from a rotating cylinder with two diameters. The effects of drag from the stirrer as well as geometrical parameters of the system on the hydrodynamic behavior were investigated using Computational Fluids Dynamics (CFD) and non-intrusive Laser Doppler Anemometry, (LDA). Data obtained from LDA measurements were used for the validation of the CFD simulations, and to detecting the macro-instabilities inside the tank, based on the time series analysis for three rotational speeds N = 180, 1000 and 2000 rpm. The numerical results revealed the formation of flow patterns and macro-vortex structures in the upper part of the tank as consequence of the Reynolds number and the stream discharge emanated from the cylindrical stirrer. Moreover, increasing the cylinder diameter has an impact on the number of recirculation loops as well as the energy consumption of the entire system showing better performance in the presence of turbulent flows.

  19. Updated reference design of a liquid metal cooled tandem mirror fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Berwald, D.H.; Whitley, R.H.; Garner, J.K.; Gromada, R.J.; McCarville, T.J.; Moir, R.W.; Lee, J.D.; Bandini, B.R.; Fulton, F.J.; Wong, C.P.C.; Maya, I.; Hoot, C.G.; Schultz, K.R.; Miller, L.G.; Beeston, J.M.; Harris, B.L.; Westman, R.A.; Ghoniem, N.M.; Orient, G.; Wolfer, M.; DeVan, J.H.; Torterelli, P.

    1985-09-01

    Detailed studies of key techinical issues for liquid metal cooled fusion breeder (fusion-fission hybrid blankets) have been performed during the period 1983-4. Based upon the results of these studies, the 1982 reference liquid metal cooled tandem mirror fusion breeder blanket design was updated and is described. The updated reference blankets provides increased breeding and lower technological risk in comparison with the original reference blanket. In addition to the blanket design revisions, a plant concept, cost, and fuel cycle economics assessment is provided. The fusion breeder continues to promise an economical source of fissile fuel for the indefinite future.

  20. Thermal-hydraulic analysis on the whole module of water cooled ceramic breeder blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Kecheng; Ma, Xuebin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Cheng, Xiaoman [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Lin, Shuang [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Huang, Kai [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China)

    2016-11-15

    Highlights: • The 3D thermal hydraulic analysis on the whole module of WCCB is performed by CFD method. • Temperature field and mass flow distribution have been obtained. • The design of WCCB is reasonable from the perspective of thermal-hydraulics. • The scheme for further optimization has been proposed. - Abstract: The Water Cooled Ceramic Breeder blanket (WCCB) is being researched for Chinese Fusion Engineering Test Reactor (CFETR). The thermal-hydraulic analysis is essential because the blanket should remove the high heat flux from the plasma and the volumetric heat generated by neutrons. In this paper, the detailed three dimensional (3D) thermal hydraulic analysis on the whole module of WCCB blanket has been performed by Computational Fluid Dynamics (CFD) method, which is capable of solving conjugate heat transfer between solid structure and fluid. The main results, including temperature field, distribution of mass flow rate and coolant pressure drop, have been calculated simultaneously. These provides beneficial guidance data for the further structural optimization and for the design arrangement of primary and secondary circuit. Under the total heat source of 1.23 MW, the coolant mass flow rate of 5.457 kg/s is required to make coolant water corresponding to the Pressurized Water Reactor (PWR) condition (15.5 MPa, 285 °C–325 °C), generating the total coolant pressure drop (△P) of 0.467 MPa. The results show that the present structural design can make all the materials effectively cooled to the allowable temperature range, except for a few small modifications on the both sides of FW. The main components, including the first wall (FW), cooling plates (CPs), side wall (SWs)&stiffening plates (SPs) and the manifold(1–4), dominate 4.7%/41.7%/13%/40.6% of the total pressure drop, respectively. Additionally, the mass flow rate of each channel has been obtained, showing the peak relative deviation of 3.4% and 2% from the average for the paratactic

  1. Parentage analysis with few contributing breeders: validation and improvement.

    Science.gov (United States)

    Duchesne, Pierre; Meldgaard, Torben; Berrebi, Patrick

    2008-01-01

    Validation of parental allocation using PAPA software (Duchesne P, Godbout MH, Bernatchez L. 2002. PAPA (package for the analysis of parental allocation): a computer program for simulated and real parental allocation. Mol Ecol Notes. 2:191-193.) was investigated under the assumption that only a small proportion of potential breeders contributed to the offspring sample. Inbreeding levels proved to have a large impact on allocation error rate. Consequently, simulations from artificial, unrelated parents may strongly underestimate allocation error, and so, whenever possible, simulations based on the actual parental genotypes should be run. An unexpected and interesting finding was that ambiguity (the highest likelihood is shared by several parental pairs) rates below 10% stood very close to exact allocation error rates (true proportions of wrong allocations). Hence, the ambiguity rate statistic may be viewed as a ready-made indicator of the resolution power of a specific parental allocation run and, if not exceeding 10%, used as an estimate of allocation error rate. It was found that the PAPA simulator, even with few contributing breeders, can be trusted to output reasonably accurate estimates of allocation error as long as those estimates do not exceed 15%. Indeed, most discrepancies between exact and estimated error then stood below 3%. Reproductive success variance had little impact on error estimate discrepancies within the same range. Finally, a (focal set) method was described to correct the estimated family sizes computed directly from parental allocations. Essentially, this method makes use of the detailed structure of the allocation probabilities associated with each parental pair with at least 1 allocated offspring. The allocation probabilities are expressed in matrix form, and the subsequent calculations are run based on standard matrix algebra. On average, this method provided better estimates of family sizes for each investigated combination of parameter

  2. Reactor Neutrinos

    CERN Document Server

    Lasserre, T; Lasserre, Thierry; Sobel, Henry W.

    2005-01-01

    We review the status and the results of reactor neutrino experiments, that toe the cutting edge of neutrino research. Short baseline experiments have provided the measurement of the reactor neutrino spectrum, and are still searching for important phenomena such as the neutrino magnetic moment. They could open the door to the measurement of coherent neutrino scattering in a near future. Middle and long baseline oscillation experiments at Chooz and KamLAND have played a relevant role in neutrino oscillation physics in the last years. It is now widely accepted that a new middle baseline disappearance reactor neutrino experiment with multiple detectors could provide a clean measurement of the last undetermined neutrino mixing angle theta13. We conclude by opening on possible use of neutrinos for Society: NonProliferation of Nuclear materials and Geophysics.

  3. NEUTRONIC REACTORS

    Science.gov (United States)

    Wigner, E.P.; Young, G.J.

    1958-10-14

    A method is presented for loading and unloading rod type fuel elements of a neutronic reactor of the heterogeneous, solld moderator, liquid cooled type. In the embodiment illustrated, the fuel rods are disposed in vertical coolant channels in the reactor core. The fuel rods are loaded and unloaded through the upper openings of the channels which are immersed in the coolant liquid, such as water. Unloading is accomplished by means of a coffer dam assembly having an outer sleeve which is placed in sealing relation around the upper opening. A radiation shield sleeve is disposed in and reciprocable through the coffer dam sleeve. A fuel rod engaging member operates through the axial bore in the radiation shield sleeve to withdraw the fuel rod from its position in the reactor coolant channel into the shield, the shield snd rod then being removed. Loading is accomplished in the reverse procedure.

  4. Safety of VVER-440 reactors

    CERN Document Server

    Slugen, Vladimir

    2011-01-01

    Safety of VVER-440 Reactors endeavours to promote an increase in the safety of VVER-440 nuclear reactors via the improvement of fission products limitation systems and the implementation of special non-destructive spectroscopic methods for materials testing. All theoretical and experimental studies performed the by author over the last 25 years have been undertaken with the aim of improving VVER-440 defence in depth, which is one of the most important principle for ensuring safety in nuclear power plants. Safety of VVER-440 Reactors is focused on the barrier system through which the safety pri

  5. Overview of pool hydraulic design of Indian prototype fast breeder ...

    Indian Academy of Sciences (India)

    out for validation of the computer codes have also been described. Keywords. Fast reactor ..... water experiments and limited sodium experiments to validate computer codes and then using these validated computer ..... Based on detailed thermal hydraulic assessment of circumferential temperature non-uniformity and jet.

  6. Analysis of changes in egg quality of broiler breeders during the first reproduction period

    National Research Council Canada - National Science Library

    Helena Kontecka; Sebastian Nowaczewski; Marta M. Sierszuła

    2012-01-01

    .... The aim of the study was to analyse the physical characteristics, morphological composition and quality of individual components of the eggs of Cobb 500 broiler breeders during the first year of reproduction...

  7. Innovatieve huisvesting voor vleeskuikenouderdieren: "Quality Time" stal = Innovative broiler breeder housing system: 'Quality Time' house

    OpenAIRE

    Emous, van, R.A.; Gunnink, H.

    2011-01-01

    In this study results are presented of the research of implementing the innovative housing system "Quality Time" concept in a practical poultry house for broiler breeders. The "Quality Time" concept can improve the sexual behaviour and fertility of the eggs.

  8. Serological profiles of commercial broiler breeders and their progeny. 2. Newcastle disease virus.

    Science.gov (United States)

    King, D J

    1986-01-01

    Newcastle disease virus (NDV) hemagglutination-inhibition (HI) titers were determined for serum samples from eight commercial broiler breeder flocks and their progeny. The chickens sampled had been vaccinated and reared by different producers in different regions of the United States. Breeder flocks had the highest number of NDV-positive HI titers (greater than or equal to 1:10). Eighty percent or more of the samples from six of eight breeder flocks were positive; the geometric mean titers (GMTs) for those six breeder flocks ranged from 19 to 92. Only 3 of 8 broiler flocks had an increased frequency of positive titers and higher GMTs after vaccination. The frequency of positive titers was greater than 80% in only 2 of 8 of the oldest broiler flocks. The number of NDV-negative titers (less than 1:10) increased with age in most broiler flocks, even though all had been vaccinated once or more with live NDV vaccines.

  9. Helper effects on breeder allocations to direct care.

    Science.gov (United States)

    Kushnick, Geoff

    2012-01-01

    Mothers receive childcare and productive assistance from allomaternal helpers in many societies. Although much effort has been aimed toward showing helper effects on maternal reproductive success, less has been directed toward highlighting the full range of potential effects on breeder behavior. I present a model of optimal maternal care with helpers, and tests of derived hypotheses with data collected among the Karo Batak-a group of Indonesian agriculturalists. To test the model's predictions I compared the effect of women receiving help from patrilateral versus matrilateral kin because those kin may provide help with different maternal responsibilities. The model predicts a decrease in maternal allocation to care that is substitutable with the helper contribution and the helper assists with that type of care; it predicts an increase in care that is nonsubstitutable with the helper contribution or substitutable care when the helper assists with other responsibilities. With the exception of one other, most models have failed to account for an increase. Analyses of time spent carrying children supported the model. With matrilateral helpers, women increased carrying; with patrilateral helpers, they decreased it. Time spent farmworking showed the opposite pattern, suggesting that matrilateral helpers effectively decrease costs, nudging optimal maternal care upward. Patterns of breastfeeding provided little support for the model. The results do, however, suggest potential proximate mechanisms by which helpers influence maternal reproductive success in cooperative breeding societies. Copyright © 2012 Wiley Periodicals, Inc.

  10. Argon generation in fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    Khripunov, Vladimir, E-mail: Khripunov_VI@NRCKI.ru

    2015-10-15

    Highlights: • A relatively long-lived Ar-39 (T{sub 1/2} = 269 yr) may appear in fusion reactor materials. • Ar-39 activities may become apparent after tritium removal. • Initial impurity control of K is definitely recommended. • A substantiation of the effective dose rates for exposure to inert argon is urgent. - Abstract: Different candidate plasma facing materials (as tungsten, beryllium), the low activation structure materials (as vanadium alloys, silicon carbides), liquid breeders (lithium and lithium-lead) and some others have been suggested for future fusion power reactor cores as corresponding to maintenance, recycling and for waste disposal acceptance after 50 and 100 years of cooling. It is shown by the neutron activation analysis that a relatively short-lived Ar-41 (T{sub 1/2} = 1.85 h), Ar-37 (T{sub 1/2} = 35 days) and rather long lived Ar-39 (T{sub 1/2} = 269 yr) may appear in these materials under the fusion neutron irradiation conditions. While argon production is essentially less than helium production in irradiated materials, at other times its impact, e.g., in the inhalation dose, becomes significant. In some cases the Ar-39 activity is comparable or even exceeds the C-14 activity and may become apparent after tritium removal from plasma exhaust and dust, from the liquid breeders, during plasma-facing and structural component recycling and waste management. The main source terms of argon-39 activity for these materials are identified and the specific production rates are evaluated relative to radiation conditions of a power or DEMO fusion reactor and to electric power production.

  11. Supercritical-pressure light water cooled reactors

    CERN Document Server

    Oka, Yoshiaki

    2014-01-01

    This book focuses on the latest reactor concepts, single pass core and experimental findings in thermal hydraulics, materials, corrosion, and water chemistry. It highlights research on supercritical-pressure light water cooled reactors (SCWRs), one of the Generation IV reactors that are studied around the world. This book includes cladding material development and experimental findings on heat transfer, corrosion and water chemistry. The work presented here will help readers to understand the fundamental elements of reactor design and analysis methods, thermal hydraulics, materials and water

  12. Be-Breeder - Learning: a new tool for teaching and learning plant breeding principles

    OpenAIRE

    Roberto Fritsche-Neto; Filipe Inácio Matias

    2016-01-01

    Abstract The Be-Breeder application is an on-line tool constructed through the R software for the purpose of assisting in some of the main genetic and statistical analyses related to the area of plant breeding. In addition, Be-Breeder provides a section called "Learning", which in a simple click-point manner allows explanation of theories related to the effect of inbreeding, population structure, qualitative and quantitative traits, heterosis, population size, effect of selection, and composi...

  13. Neutronics calculation of an heterogeneous compact and thermal core by means of deterministic and stochastic transport theory. Application to the experimental reactor of the University of Strasbourg; Modelisation neutronique d`un coeur thermique compact et heterogene en theorie du transport deterministe et probabiliste. Application au reacteur experimental de l`Universite de Strasbourg

    Energy Technology Data Exchange (ETDEWEB)

    Jammes, Ch

    1997-11-28

    The aim of this work is to create, validate theoretically and experimentally a calculation route for a thermal irradiation reactor. This is the research reactor of the University of Strasbourg, which presents all of characteristics of this reactor-type: compact and heterogeneous core, slab-type fuel with a high 235-uranium enrichment. This calculation route is based on the first use of the following two modern transport methods: the TDT method and the Monte Carlo method. The former, programmed within the APOLLO2 code, is a two dimensional collision probabilities method. The later, used by the TRIPOLI4 code, is a stochastic method. Both can be applied to complex geometries. After a few theoretical reminders about transport codes, a set of integral experiments is described which have been realized within the research reactor of the University of Strasbourg. One of them has been performed for this study. At the beginning of the theoretical part, significant errors are apparent due to the use of calculation route based on homogenization, condensation and the diffusion approximation. An extensive comparison between the discrete ordinates method and the TDT method carries out that the use of the TDT method is relevant for the studied reactor. The treatment of axial leakage with this method is the only disadvantage. Therefore, the use of the code TRIPOLI4 is recommended for a more accurate study of leakage within a reflector. By means of the experimental data, the ability of our calculation route is confirmed for essential neutronics questions such as the critical mass determination, the power distribution and the fuel management. (author)

  14. Experimental studies into the fluid dynamic performance of the coolant flow in the mixed core of the Temelin NPP VVER-1000 reactor

    Directory of Open Access Journals (Sweden)

    S.M. Dmitriev

    2015-11-01

    Full Text Available The paper presents the results of studies into the interassembly coolant interaction in the Temelin nuclear power plant (NPP VVER-1000 reactor core. An aerodynamic test bench was used to study the coolant flow processes in a TVSA-type fuel assembly bundle. To obtain more detailed information on the coolant flow dynamics, a VVER-1000 reactor core fragment was selected as the test model, which comprised two segments of a TVSA-12 PLUS fuel assembly and one segment of a TVSA-T assembly with stiffening angles and an interassembly gap. The studies into the coolant fluid dynamics consisted in measuring the velocity vector both in representative TVSA regions and inside the interassembly gap using a five-channel pneumometric probe. An analysis into the spatial distribution of the absolute flow velocity projections made it possible to detail the TVSA spacer, mixing and combined spacer grid flow pattern, identify the regions with the maximum transverse coolant flow, and determine the depth of the coolant flow disturbance propagation and redistribution in adjacent TVSA assemblies. The results of the studies into the interassembly coolant interaction among the adjacent TVSA assemblies are used at OKBM Afrikantov to update the VVER-1000 core thermal-hydraulic analysis procedures and have been added to the database for verification of computational fluid dynamics (CFD codes and for detailed cellwise analyses of the VVER-100 reactor cores.

  15. Neutronic reactor

    Science.gov (United States)

    Wende, Charles W. J.; Babcock, Dale F.; Menegus, Robert L.

    1983-01-01

    A nuclear reactor includes an active portion with fissionable fuel and neutron moderating material surrounded by neutron reflecting material. A control element in the active portion includes a group of movable rods constructed of neutron-absorbing material. Each rod is movable with respect to the other rods to vary the absorption of neutrons and effect control over neutron flux.

  16. Neutronic reactor

    Energy Technology Data Exchange (ETDEWEB)

    Babcock, D.F.; Menegus, R.L.; Wende, C.W.

    1983-01-04

    A nuclear reactor includes an active portion with fissionable fuel and neutron moderating material surrounded by neutron reflecting material. A control element in the active portion includes a group of movable rods constructed of neutron-absorbing material. Each rod is movable with respect to the other rods to vary the absorption of neutrons and effect control over neutron flux.

  17. Stabilized Spheromak Fusion Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, T

    2007-04-03

    The U.S. fusion energy program is focused on research with the potential for studying plasmas at thermonuclear temperatures, currently epitomized by the tokamak-based International Thermonuclear Experimental Reactor (ITER) but also continuing exploratory work on other plasma confinement concepts. Among the latter is the spheromak pursued on the SSPX facility at LLNL. Experiments in SSPX using electrostatic current drive by coaxial guns have now demonstrated stable spheromaks with good heat confinement, if the plasma is maintained near a Taylor state, but the anticipated high current amplification by gun injection has not yet been achieved. In future experiments and reactors, creating and maintaining a stable spheromak configuration at high magnetic field strength may require auxiliary current drive using neutral beams or RF power. Here we show that neutral beam current drive soon to be explored on SSPX could yield a compact spheromak reactor with current drive efficiency comparable to that of steady state tokamaks. Thus, while more will be learned about electrostatic current drive in coming months, results already achieved in SSPX could point to a productive parallel development path pursuing auxiliary current drive, consistent with plans to install neutral beams on SSPX in the near future. Among possible outcomes, spheromak research could also yield pulsed fusion reactors at lower capital cost than any fusion concept yet proposed.

  18. Selective breeding of Arabian and Thoroughbred racehorses in Algeria: perceptions, objectives and practices of owners-breeders

    Directory of Open Access Journals (Sweden)

    Safia Tennah

    2014-04-01

    Full Text Available This survey, conducted with 461 racehorse owners-breeders in Algeria between 2009 and 2011, investigates their perceptions, objectives and practices regarding selective breeding. Racehorse breeding is a full-time professional activity for a third of interviewees. The holdings are small-sized with 77% owning one or two mares. The regular practice of mating is here used to categorize breeders according to their degree of professionalization (38.4% professional vs. 61.6% occasional breeders. Experience in the sector was also used to classify breeders, considering as "junior" the breeders under 10 years experience (38.8% and as "senior" those above 10 years (61.2%. More than professionalization, experience shows a significant impact on practices and objectives. Thus, experience influences breed choice (junior breeders tend to specialize while senior own both Arabian and Thoroughbreds, age at first foaling (sooner among senior breeders, information sources considered for selecting stallions (senior use more diversified sources, the importance granted to the price of mating (greater for junior breeders, the importance granted to the ranking compared to earnings (the ranking being more important to junior breeders, and the priority given to breeding (junior breeders give higher priority to a buy-race-resell activity. Finally, racehorse breeding is poorly professionalized, the only financial goal being cost coverage. Despite inappropriate practices, an interest for selection is noticed.

  19. Turbulent precipitation of uranium oxalate in a vortex reactor - experimental study and modelling; Precipitation turbulente d'oxalate d'uranium en reacteur vortex - etude experimentale et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Sommer de Gelicourt, Y

    2004-03-15

    Industrial oxalic precipitation processed in an un-baffled magnetically stirred tank, the Vortex Reactor, has been studied with uranium simulating plutonium. Modelling precipitation requires a mixing model for the continuous liquid phase and the solution of population balance for the dispersed solid phase. Being chemical reaction influenced by the degree of mixing at molecular scale, that commercial CFD code does not resolve, a sub-grid scale model has been introduced: the finite mode probability density functions, and coupled with a model for the liquid energy spectrum. Evolution of the dispersed phase has been resolved by the quadrature method of moments, first used here with experimental nucleation and growth kinetics, and an aggregation kernel based on local shear rate. The promising abilities of this local approach, without any fitting constant, are strengthened by the similarity between experimental results and simulations. (author)

  20. Dynamic model of biological nitrogen removal in SBR reactors: Experimental study and model calibration; Modello di simulazione dinamica della rimozione biologica dell`azoto con reattori a flusso discontinuo (SBR): indagine sperimentale e taratura del modello

    Energy Technology Data Exchange (ETDEWEB)

    Andreottola, G. [Trento Univ. (Italy). Dipt. di Ingegneria Civile e Ambientale; Bortone, G.; Spadoni, S. [ENEA, Bologna (Italy). Area Energia Ambiente e Salute

    1995-03-01

    In the present study are presented the results of the experimental activity carried out in order to calibrate and verify the dynamical model developed by the Authors for nitrogen removal with SBR processes. Four track studies (two for the calibration phase and two for the verification one) have been carried out on the SBR lab-scale reactor. The experimental results have shown temporary increase of nitrite in the nitrification phase. Therefore, the SBR dynamic model has been modified, in order to better explain the dynamic behavior of the nitrogen removal process: nitrousation and nitratation processes have been explicitly described and a inhibition kinetic of nitratation by ammonia has been introduced. The new model, calibrated and verified, has successfully explained the dynamic behavior of the process. Further work will be carried out in order to better understand the inhibition dynamic of nitratation.