WorldWideScience

Sample records for experiment undulator-based production

  1. Undulator-Based Production of Polarized Photons

    International Nuclear Information System (INIS)

    McDonald, Kirk

    2008-01-01

    'Project Title: Undulator-Based Production of Polarized Photons' DOE Contract Number: FG02-04ER41355 Principal Investigator: Prof. Kirk McDonald Period of Performance: 09/10/2004 thru 08/31/2006 This award was to fund Princeton's activity on SLAC experiment E166, 'Undulator-Based Production of Polarized Positrons' which was performed at SLAC during June and September 2005. Princeton U. fabricated a magnetic spectrometer for this experiment, and participated in the commissioning, operation, and analysis of the experiment, for which Prof. McDonald was a co-spokesperson. The experiment demonstrated that an intense positron beam with 80% longitudinal polarization could be generated by conversion of MeVenergy circularly polarized photons in a thin target, which photons were generated by passage of high-energy electrons through a helical undulator. This technique has since been adopted as the baseline for the polarized positron source of the proposed International Linear Collider. Results of the experiment have been published in Physical Review Letters, vol 100, p 210801 (2008) (see attached .pdf file), and a longer paper is in preparation.

  2. Undulator-based production of polarized positrons

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, G. [Tel-Aviv Univ. (Israel); Barley, J. [Cornell Univ., Ithaca, NY (United States); Batygin, Y. [SLAC, Menlo Park, CA (US)] (and others)

    2009-05-15

    Full exploitation of the physics potential of a future International Linear Collider will require the use of polarized electron and positron beams. Experiment E166 at the Stanford Linear Accelerator Center (SLAC) has demonstrated a scheme in which an electron beam passes through a helical undulator to generate photons (whose first-harmonic spectrum extended to 7.9 MeV) with circular polarization, which are then converted in a thin target to generate longitudinally polarized positrons and electrons. The experiment was carried out with a one-meter-long, 400-period, pulsed helical undulator in the Final Focus Test Beam (FFTB) operated at 46.6 GeV. Measurements of the positron polarization have been performed at five positron energies from 4.5 to 7.5 MeV. In addition, the electron polarization has been determined at 6.7MeV, and the effect of operating the undulator with a ferrofluid was also investigated. To compare the measurements with expectations, detailed simulations were made with an upgraded version of GEANT4 that includes the dominant polarization-dependent interactions of electrons, positrons, and photons with matter. The measurements agree with calculations, corresponding to 80% polarization for positrons near 6 MeV and 90% for electrons near 7 MeV. (orig.)

  3. The E166 experiment: Development of an undulator-based ...

    Indian Academy of Sciences (India)

    A longitudinal polarized positron beam is foreseen for the international linear collider (ILC). A proof-of-principle experiment has been performed in the final focus test beam at SLAC to demonstrate the production of polarized positrons for implementation at the ILC. The E166 experiment uses a 1 m long helical undulator in a ...

  4. Undulator-Based Production of Polarized Positrons, A Proposal for the 50-GeV Beam in the FFTB

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, G

    2004-03-25

    The full exploitation of the physics potential of future linear colliders such as the JLC, NLC, and TESLA will require the development of polarized positron beams. In the proposed scheme of Balakin and Mikhailichenko [1] a helical undulator is employed to generate photons of several MeV with circular polarization which are then converted in a relatively thin target to generate longitudinally polarized positrons. This experiment, E-166, proposes to test this scheme to determine whether such a technique can produce polarized positron beams of sufficient quality for use in future linear colliders. The experiment will install a meter-long, short-period, pulsed helical undulator in the Final Focus Test Beam (FFTB) at SLAC. A low-emittance 50-GeV electron beam passing through this undulator will generate circularly polarized photons with energies up to 10 MeV. These polarized photons are then converted to polarized positrons via pair production in thin targets. Titanium and tungsten targets, which are both candidates for use in linear colliders, will be tested. The experiment will measure the flux and polarization of the undulator photons, and the spectrum and polarization of the positrons produced in the conversion target, and compare the measurement results to simulations. Thus the proposed experiment directly tests for the first time the validity of the simulation programs used for the physics of polarized pair production in finite matter, in particular the effects of multiple scattering on polarization. Successful comparison of the experimental results to the simulations will lead to greater confidence in the proposed designs of polarized positrons sources for the next generation of linear colliders. This experiment requests six-weeks of time in the FFTB beam line: three weeks for installation and setup and three weeks of beam for data taking. A 50-GeV beam with about twice the SLC emittance at a repetition rate of 30 Hz is required.

  5. Undulator-Based Production of Polarized Positrons, A Proposal for the 50-GeV Beam in the FFTB

    Energy Technology Data Exchange (ETDEWEB)

    G. Alexander; P. Anthony; V. Bharadwaj; Yu.K. Batygin; T. Behnke; S. Berridge; G.R. Bower; W. Bugg; R. Carr; E. Chudakov; J.E. Clendenin; F.J. Decker; Yu. Efremenko; T. Fieguth; K. Flottmann; M. Fukuda; V. Gharibyan; T. Handler; T. Hirose; R.H. Iverson; Yu. Kamyshkov; H. Kolanoski; T. Lohse; Chang-guo Lu; K.T. McDonald; N. Meyners; R. Michaels; A.A. Mikhailichenko; K. Monig; G. Moortgat-Pick; M. Olson; T. Omori; D. Onoprienko; N. Pavel; R. Pitthan; M. Purohit; L. Rinolfi; K.P. Schuler; J.C. Sheppard; S. Spanier; A. Stahl; Z.M. Szalata; J. Turner; D. Walz; A. Weidemann; J. Weisend

    2003-06-01

    The full exploitation of the physics potential of future linear colliders such as the JLC, NLC, and TESLA will require the development of polarized positron beams. In the proposed scheme of Balakin and Mikhailichenko [1] a helical undulator is employed to generate photons of several MeV with circular polarization which are then converted in a relatively thin target to generate longitudinally polarized positrons. This experiment, E-166, proposes to test this scheme to determine whether such a technique can produce polarized positron beams of sufficient quality for use in future linear colliders. The experiment will install a meter-long, short-period, pulsed helical undulator in the Final Focus Test Beam (FFTB) at SLAC. A low-emittance 50-GeV electron beam passing through this undulator will generate circularly polarized photons with energies up to 10 MeV. These polarized photons are then converted to polarized positrons via pair production in thin targets. Titanium and tungsten targets, which are both candidates for use in linear colliders, will be tested. The experiment will measure the flux and polarization of the undulator photons, and the spectrum and polarization of the positrons produced in the conversion target, and compare the measurement results to simulations. Thus the proposed experiment directly tests for the first time the validity of the simulation programs used for the physics of polarized pair production in finite matter, in particular the effects of multiple scattering on polarization. Successful comparison of the experimental results to the simulations will lead to greater confidence in the proposed designs of polarized positrons sources for the next generation of linear colliders. This experiment requests six-weeks of time in the FFTB beam line: three weeks for installation and setup and three weeks of beam for data taking. A 50-GeV beam with about twice the SLC emittance at a repetition rate of 30 Hz is required.

  6. Measurement of the positron polarization at an helical undulator based positron source for the international linear collider ILC. The E-166 experiment at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Karim, Laihem

    2008-06-05

    A helical undulator based polarized positron source is forseen at a future International Linear Collider (ILC). The E-166 experiment has tested this scheme using a one meter long, short-period, pulsed helical undulator installed in the Final Focus Test Beam (FFTB) at SLAC. A low-emittance 46.6 GeV electron beam passing through this undulator generated circularly polarized photons with energies up to about 8 MeV. The generated photons of several MeV with circular polarization are then converted in a relatively thin target to generate longitudinally polarized positrons. Measurements of the positron polarization have been performed at 5 different energies of the positrons. In addition electron polarization has been determined for one energy point. For a comparison of the measured asymmetries with the expectations detailed simulations were necessary. This required upgrading GEANT4 to include the dominant polarization dependent interactions of electrons, positrons and photons in matter. The measured polarization of the positrons agrees with the expectations and is for the energy point with the highest polarization at 6MeV about 80%. (orig.)

  7. Helical undulator based on partial redistribution of uniform magnetic field

    Science.gov (United States)

    Balal, N.; Bandurkin, I. V.; Bratman, V. L.; Fedotov, A. E.

    2017-12-01

    A new type of helical undulator based on redistribution of magnetic field of a solenoid by ferromagnetic helix has been proposed and studied both in theory and experiment. Such undulators are very simple and efficient for promising sources of coherent spontaneous THz undulator radiation from dense electron bunches formed in laser-driven photo-injectors.

  8. Helical undulator based on partial redistribution of uniform magnetic field

    Directory of Open Access Journals (Sweden)

    N. Balal

    2017-12-01

    Full Text Available A new type of helical undulator based on redistribution of magnetic field of a solenoid by ferromagnetic helix has been proposed and studied both in theory and experiment. Such undulators are very simple and efficient for promising sources of coherent spontaneous THz undulator radiation from dense electron bunches formed in laser-driven photo-injectors.

  9. Study for a 6 GeV undulator based synchrotron radiation source

    International Nuclear Information System (INIS)

    Vignola, G.; Barton, M.; Blumberg, R.; Galayda, J.; Krinsky, S.; Luccio, A.; Pellegrini, C.; van Steenbergen, A.; Wang, J.

    1985-01-01

    A partial study for a 6 GeV undulator based synchrotron radiation source for production of high brightness undulator radiation, in the A region, is presented. The basic lattice adopted for the storage ring is a hybrid FODO Chasman-Green lattice, making use of gradient in the dipoles. We discuss also the e beam current limits and the injection parameters

  10. The E166 experiment: Development of an undulator-based ...

    Indian Academy of Sciences (India)

    K-factor is about 0.19 which leads to a parabolic distribution for the first harmonic with a cut-off ... magnetization, an asymmetry in the transmitted photon rate is observed. The ... [1] G Moortgat-Pick and H M Steiner, EPJdirect C, vol. 1, C6 ...

  11. Beam Diagnostics for Laser Undulator Based on Compton Backward Scattering

    CERN Document Server

    Kuroda, R

    2005-01-01

    A compact soft X-ray source is required in various research fields such as material and biological science. The laser undulator based on Compton backward scattering has been developed as a compact soft X-ray source for the biological observation at Waseda University. It is performed in a water window region (250eV - 500 eV) using the interaction between 1047 nm Nd:YLF laser (10ps FWHM) and about 5 MeV high quality electron beam (10ps FWHM) generated from rf gun system. The range of X-ray energy in the water window region has K-shell absorption edges of Oxygen, Carbon and Nitrogen, which mainly constitute of living body. Since the absorption coefficient of water is much smaller than the protein's coefficient in this range, a dehydration of the specimens is not necessary. To generate the soft X-ray pulse stably, the electron beam diagnostics have been developed such as the emittance measurement using double slit scan technique, the bunch length measurement using two frequency analysis technique. In this confere...

  12. Framework of product experience

    NARCIS (Netherlands)

    Desmet, P.; Hekkert, P.

    2007-01-01

    In this paper, we introduce a general framework for product experience that applies to all affective responses that can be experienced in human-product interaction. Three distinct components or levels of product experiences are discussed: aesthetic experience, experience of meaning, and emotional

  13. Tourist product in experience economy

    OpenAIRE

    Stasiak Andrzej

    2014-01-01

    The turn of the 20th and 21st c. was marked by the development of experience economy, in which the basic commodities are not specific products, but the customers’ emotions, impressions and experiences. Tourism has always been a particular “holiday experience industry”. In recent years, however, the importance of the conscious creation of emotional tourism products has become even greater; we may observe continuous efforts to multiply and intensify tourism experience. The key activities to ach...

  14. Performance of the undulator based ultraviolet and soft x-ray beamline for catalysis and surface science at National Synchrotron Radiation Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Du, Liangliang [University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, Anhui 230029 (China); University of Science and Technology of China, National Synchrotron Radiation Laboratory, Hefei, Anhui 230029 (China); Du, Xuewei, E-mail: xwdu@ustc.edu.cn [University of Science and Technology of China, National Synchrotron Radiation Laboratory, Hefei, Anhui 230029 (China); Wei, Shen [University of Science and Technology of China, National Synchrotron Radiation Laboratory, Hefei, Anhui 230029 (China); Li, Chaoyang [China Academy of Engineering Physics, Mianyang, Sichuan 621900 (China); Pan, Congyuan; Ju, Huanxin [University of Science and Technology of China, National Synchrotron Radiation Laboratory, Hefei, Anhui 230029 (China); Wang, Qiuping, E-mail: qiuping@ustc.edu.cn [University of Science and Technology of China, National Synchrotron Radiation Laboratory, Hefei, Anhui 230029 (China); Zhu, Junfa [University of Science and Technology of China, National Synchrotron Radiation Laboratory, Hefei, Anhui 230029 (China)

    2016-12-01

    The undulator based ultraviolet and soft x-ray beamline BL11U for catalysis and surface science at National Synchrotron Radiation Laboratory (NSRL) has been under opteration for months and the present performance is described. This beamline utilizes radiation from an in-vacuum undulator, which has 30 magnetic periods with the period length of 40 mm. A varied-line-spacing plane grating monochromator is employed tto cover the photon energy region of 20–600 eV by two gratings with nominal groove densities of 400 llmm and 1200 l/mm respectively. The energy resolution power E/ΔE is measured with a gas ionization chamber and the photon flux is measured by a photodiode. Results show that the resolution power is better than 10,000 at a photon energy of 29.2 eV. And the flux is higher than 1×10{sup 10} phs/s under 300 mA ring beam current for most of the covered photon energy.

  15. Affective Productions of Mathematical Experience

    Science.gov (United States)

    Walshaw, Margaret; Brown, Tony

    2012-01-01

    In underscoring the affective elements of mathematics experience, we work with contemporary readings of the work of Spinoza on the politics of affect, to understand what is included in the cognitive repertoire of the Subject. We draw on those resources to tell a pedagogical tale about the relation between cognition and affect in settings of…

  16. Design of experiments in production engineering

    CERN Document Server

    2016-01-01

    This book covers design of experiments (DoE) applied in production engineering as a combination of manufacturing technology with applied management science. It presents recent research advances and applications of design experiments in production engineering and the chapters cover metal cutting tools, soft computing for modelling and optmization of machining, waterjet machining of high performance ceramics, among others.

  17. Experiments on eta-meson production

    International Nuclear Information System (INIS)

    Peng, J.C.

    1985-01-01

    Following a review of some highlights of eta-meson characteristics, the status of eta-meson production experiments is reviewed. The physics motivations and first results of two LAMPF experiments on (π,eta) reactions are discussed. Possible future experiments are also discussed. 42 refs., 12 figs., 4 tabs

  18. Pion production experiments at IUCF

    Science.gov (United States)

    Daehnick, W. W.

    2001-12-01

    Pion production in pp collisions is of special interest near threshold where very few partial waves contribute and where calculations should be manageable and results more conclusive. The first explicit calculations for pp → ppπ0 and pp → pnπ+ cross sections near threshold were made by Koltun and Reitan in 1966 and by Schillaci, Silbar and Young in 1969. They remained unchallenged and untested until cross sections very close to threshold could finally be measured1,2. The realization that the pioneering calculations missed the true cross sections by a wide margin has spurred much new theoretical research.3,4,5 ...

  19. An assembly of tritium production experiment

    International Nuclear Information System (INIS)

    Abe, Toshihiko

    1981-01-01

    An assembly for tritium production experiment, i.e. Tritium Extraction System (TREX) constructed as a small scale test facility for tritium production, and Tritium Removal System (TRS) attached to TREX, and the preliminary results of the experiments with them are described. The radiological safety of the process and operation is also an important consideration. Lithium-aluminum alloy was selected as the most promising target material. The following matters are involved in the scope of production technology: the selection of a target material and target preparation, reactor irradiation, the construction of a facility for the extraction of tritium from the irradiated target, the establishment of the optimum conditions of extraction, the purification, collection and storage of tritium, and the inspection of the product. The tritium production experiment at JAERI is yet on the initial stage; the development is to be continued with the stepwise increase of the scale of tritium production. (J.P.N.)

  20. Y*, E* and Ω- in production experiments

    International Nuclear Information System (INIS)

    Hemingway, R.J.

    1976-01-01

    A review is given of all production experiment data relevant to the spectroscopy of Y*, Ψ* and Ω - since the previous Baryon Resonances Conference at Purdue in 1973. A short look at future prospects is appended. (author)

  1. Charm production asymmetries at the Fermilab experiments

    International Nuclear Information System (INIS)

    Carter, T.

    1997-01-01

    I present asymmetries between the production of charm particles and anti-particles from Fermilab experiments, E687, E769 and E791. The results are shown as a function of x F and p t 2 for D ± and D s ± mesons and for pion, kaon and photon beams and compared against current models. Results are also shown for a recent analysis of correlations between production of charm mesons and an associated pion. 14 refs., 5 figs., 3 tabs

  2. An undulator based high flux and high resolution beamline for atomic, molecular and optical science (AMOS) research at INDUS-2 synchrotron radiation source (SRS)

    International Nuclear Information System (INIS)

    Das, Asim Kumar; Rajasekhar, B.N.; Sahoo, N.K.

    2014-08-01

    A dedicated UV-VUV and soft X-ray beamline to provide several new research opportunities in Photon induced processes in the energy range of 6-250 eV for Atomic Molecular and Optical Science (AMOS) research, a domain still less explored both at national as well international level, has been proposed by Atomic and Molecular Physics Division, BARC. This beamline will use a planar permanent magnet (PPM) undulator based on Indus-2 Synchrotron Radiation Source (SRS), a 2.5 GeV third generation electron storage ring at RRCAT, Indore, India and is expected to offer a variety of opportunities for more advanced and sustained investigations for AMOS research. A plane mirror and a toroidal mirror are used as the pre-focusing optics of the AMOS beamline. A varied line spacing plane grating monochromator (VLSPGM) in a converging beam, constant included angle mode containing one toroidal focusing mirror and four interchangeable gratings is to be used to cover the energy range of 6 to 250 eV and obtain resolving powers ∼10 4 and intensity ∼10 12 ph/s at the sample position. A toroidal mirror is used to focus the diverging monochromatic light from the monochromator at a distance of 150 cm with a 1:1 magnification. As the first step towards the beamline optics design, the evaluation of the PPM undulator radiation characteristics relevant to beamline design has been performed using the Indus-2 SRS parameters in the long straight section of the ring, PPM undulator parameters, and the empirical expressions available in literature. The software resources such as XOPS, ESRF, France and SPECTRA, Photon factory, Japan have been used for detailed modelling and verification of the empirical computations. Beamline layout preparation, optimization, imaging performance evaluation, and resolving power calculations for ideal beamline optics are carried out using SHADOWVUI, an extension of XOPS software resource. A new mounting of the optical components in the monochromator has been proposed

  3. Erosion products in disruption simulation experiments

    International Nuclear Information System (INIS)

    Safronov, V.; Arkhipov, N.; Bakhtin, V.; Barsuk, V.; Kurkin, S.; Mironova, E.; Toporkov, D.; Vasenin, S.; Zhitlukhin, A.; Arkhipov, I.; Werle, H.; Wuerz, H.

    1998-01-01

    Erosion of divertor materials under tokamak disruption event presents a serious problem of ITER technology. Erosion restricts the divertor lifetime and leads to production of redeposited layers of the material retaining large amount of tritium, which is a major safety issue for future fusion reactor. Since ITER disruptive heat loads are not achievable in existing tokamaks, material erosion is studied in special simulation experiments. Till now the simulation experiments have focused mainly on investigation of shielding effect and measurement of erosion rate. In the present work the properties of eroded and redeposited graphite are studied under condition typical for hard ITER disruption. (author)

  4. Production experience with the ATLAS Event Service

    Science.gov (United States)

    Benjamin, D.; Calafiura, P.; Childers, T.; De, K.; Guan, W.; Maeno, T.; Nilsson, P.; Tsulaia, V.; Van Gemmeren, P.; Wenaus, T.; ATLAS Collaboration

    2017-10-01

    The ATLAS Event Service (AES) has been designed and implemented for efficient running of ATLAS production workflows on a variety of computing platforms, ranging from conventional Grid sites to opportunistic, often short-lived resources, such as spot market commercial clouds, supercomputers and volunteer computing. The Event Service architecture allows real time delivery of fine grained workloads to running payload applications which process dispatched events or event ranges and immediately stream the outputs to highly scalable Object Stores. Thanks to its agile and flexible architecture the AES is currently being used by grid sites for assigning low priority workloads to otherwise idle computing resources; similarly harvesting HPC resources in an efficient back-fill mode; and massively scaling out to the 50-100k concurrent core level on the Amazon spot market to efficiently utilize those transient resources for peak production needs. Platform ports in development include ATLAS@Home (BOINC) and the Google Compute Engine, and a growing number of HPC platforms. After briefly reviewing the concept and the architecture of the Event Service, we will report the status and experience gained in AES commissioning and production operations on supercomputers, and our plans for extending ES application beyond Geant4 simulation to other workflows, such as reconstruction and data analysis.

  5. Halo's production in vitro on brachytherapy experiments

    International Nuclear Information System (INIS)

    Cuperschmid, Ethel M.; Sarmento, Eduardo V.; Campos, Tarcisio P.R.

    2011-01-01

    Since earlier of 1960, one of the most significant contributions of radiation biology has been the theory of cell killing as a function of increasing doses of a cytotoxic agent, as well as the demonstration of repair of sublethal or potentially lethal damage after irradiation. The impact of cellular and molecular radiobiology, by exploitation of cellular mechanisms related to apoptosis, may be the cell killing with irradiation by including changes other than unrepaired DNA damage. Based on the understanding of the tumor microenvironment and how growth factors and proteins produced by irradiated cells may alter cellular processes, improved combined-modality strategies may emerge. This effect was show since 1960's, but here we propose to demonstrate this phenomenon in Brachytherapy. The present goal is to verify the macroscopic response through the production and analysis of clonogenic control based on halos generation by radioactive seeds of Ho-165 and Sm-153, aiming to study the effect of this type of irradiation. Confluent cell culture flasks with HeLa cell line were subjected to radiation in a period up to five half-lives of radionuclide, respectively. Devices were introduced which set the polymer-ceramic Ho-165 and Sm-153 seeds in the vials. After a period of exposure, the flasks were stained with violet Gensiana. The results showed the formation of halos control of confluent cancer cells. This paper will describe these experiments in the current stage of the research and report the implications of this new way of therapy for cancer treatment. (author)

  6. Experience with supermirror production at PSI

    International Nuclear Information System (INIS)

    Boeni, P.; Elsenhans, O.; Friedli, H.P.; Grimmer, H.; Anderson, I.S.

    1993-01-01

    Supermirror coatings for the seven neutron guides of the continuous spallation source SINQ at PSI are being produced on a DC-magnetron sputtering plant at PSI since April 1993 at a rate of up to 2 meters of guide per day. All Supermirrors are characterised after production on the test spectrometer TOPSI at reactor Saphir. The more than 300 production runs allow interesting comparisons between coatings made on various types of glasses. (author) 3 figs

  7. Main Injector Particle Production Experiment Status

    International Nuclear Information System (INIS)

    Lebedev, Andre

    2007-01-01

    MIPP (FNAL-E907) is a large acceptance spectrometer to measure hadronic particle production - TPC and wire chambers to measure track parameters - TPC dE/dx, ToF, differential Cherenkov and ring imaging Cherenkov give π/K/p separation up to 100 GeV/c

  8. Production experience with the ATLAS Event Service

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00066086; The ATLAS collaboration; Calafiura, Paolo; Childers, John Taylor; De, Kaushik; Guan, Wen; Maeno, Tadashi; Nilsson, Paul; Tsulaia, Vakhtang; van Gemmeren, Peter; Wenaus, Torre

    2017-01-01

    The ATLAS Event Service (AES) has been designed and implemented for efficient running of ATLAS production workflows on a variety of computing platforms, ranging from conventional Grid sites to opportunistic, often short-lived resources, such as spot market commercial clouds, supercomputers and volunteer computing. The Event Service architecture allows real time delivery of fine grained workloads to running payload applications which process dispatched events or event ranges and immediately stream the outputs to highly scalable Object Stores. Thanks to its agile and flexible architecture the AES is currently being used by grid sites for assigning low priority workloads to otherwise idle computing resources; similarly harvesting HPC resources in an efficient back-fill mode; and massively scaling out to the 50-100k concurrent core level on the Amazon spot market to efficiently utilize those transient resources for peak production needs. Platform ports in development include ATLAS@Home (BOINC) and the Google Comp...

  9. Production Experience with the ATLAS Event Service

    CERN Document Server

    Benjamin, Douglas; The ATLAS collaboration

    2016-01-01

    The ATLAS Event Service (ES) has been designed and implemented for efficient running of ATLAS production workflows on a variety of computing platforms, ranging from conventional Grid sites to opportunistic, often short-lived resources, such as spot market commercial clouds, supercomputers and volunteer computing. The Event Service architecture allows real time delivery of fine grained workloads to running payload applications which process dispatched events or event ranges and immediately stream the outputs to highly scalable Object Stores. Thanks to its agile and flexible architecture the ES is currently being used by grid sites for assigning low priority workloads to otherwise idle computing resources; similarly harvesting HPC resources in an efficient back-fill mode; and massively scaling out to the 50-100k concurrent core level on the Amazon spot market to efficiently utilize those transient resources for peak production needs. Platform ports in development include ATLAS@Home (BOINC) and the Goggle Comput...

  10. Experiences on Grid Production for GEANT4

    CERN Document Server

    Lamanna, M; Méndez-Lorenzo, P; Moscicki, J; Ribon, A

    2007-01-01

    Geant4 is a worldwide collaboration of scientists and software engineers whose goal is to develop, maintain and provide support for the Geant4 package, representing a general purpose Monte Carlo toolkit for simulating the propagation of particles through matter. Geant4 is currently employed in a row of particle physics experiments (BaBar, HARP, ATLAS, CMS, LHCb), and is also applied in other areas like space science, medical applications, and radiation studies. Due to the complexity of the Geant4 code and to the broad spectrum of possible configurations - involving a variety of physical processes for different source particles, particle energies and target or shielding materials - an intensive testing of new release candidates is mandatory to thoroughly test each of its components, especially before major releases, generally twice a year. Regression tests are required to be performed by the Geant4 team within a short period of time (2 to 3 weeks), basically demanding vast computational resources (equivalent t...

  11. Medical radioisotope production - the Australian experience

    Energy Technology Data Exchange (ETDEWEB)

    Druce, M. [Australian Nuclear Science and Technology Organisation, Menai (Australia)

    1996-12-31

    The Australian government, through its instrumentality, the Australian Nuclear Science and Technology Organization (ANSTO), owns and operates a 10-MW Dido-class research reactor at Lucas Heights on the southern outskirts of Sydney. This is the only operating nuclear reactor in Australia. It was built in 1958 and has a maximum flux of 1 x 10{sup 14} n/cm{sup 2}{center_dot}s. ANSTO also jointly owns and operates a 30-MeV IBA negative ion cyclotron at Camperdown in central Sydney, which began operation in 1992. ANSTO is predominantly a research organization; however, radioisotopes are commercially produced through Australian Radioisotopes (ARI), an ANSTO business entity. Seventy-four people are employed by ARI, which is a vertically integrated organization, i.e., everything from target preparation to sale of products is undertaken.

  12. Y*, Xi * and Omega /sup -/ in production experiments

    CERN Document Server

    Hemingway, R J

    1976-01-01

    A review is given of all production experiment data relevant to the spectroscopy of Y*, Xi * and Omega /sup -/ since the previous Baryon Resonances Conference at Purdue in 1973. A short look at future prospects is appended. (27 refs).

  13. Experience in independent power production: Two projects that closed

    Energy Technology Data Exchange (ETDEWEB)

    Kappaz, M.H.

    1994-12-31

    K and M Engineering and Consulting Corporation`s experience in independent power production is outlined. The following topics are discussed: the KMR Power Corporation, K and M strengths and strategy, key success factors, project experience, selected projects, and capital structure.

  14. Results from CERN experiment NA36 on strangeness production

    International Nuclear Information System (INIS)

    1991-12-01

    Measurements of the production of strange particles in the reactions S + Pb and S + S at beam momentum 200GeV/c per nucleon are presented. A short description of CERN experiment NA36 and the methods of raw data analysis, is followed by physics results concentrating on the dependence of strange particle production on multiplicity. Transverse momentum distributions are also presented

  15. Beauty and charm production in fixed target experiments

    International Nuclear Information System (INIS)

    Kidonakis, Nikolaos; Vogt, Ramona

    2004-01-01

    We present calculations of NNLO threshold corrections for beauty and charm production in π - p and pp interactions at fixed-target experiments. Recent calculations for heavy quark hadroproduction have included next-to-next-to-leading-order (NNLO) soft-gluon corrections [1] to the double differential cross section from threshold resummation techniques [2]. These corrections are important for near-threshold beauty and charm production at fixed-target experiments, including HERA-B and some of the current and future heavy ion experiments

  16. Catering products - wishes from managers, employees and users and experiences from product development

    DEFF Research Database (Denmark)

    Trolle, Ellen; Thorsen, Anne Vibeke; Jørgensen, Michael Søgaard

    The experiences from the project Catering 2000 in relation to the future demands and needs for processed products to the catering sector......The experiences from the project Catering 2000 in relation to the future demands and needs for processed products to the catering sector...

  17. An Overview of Some Natural Products with Two A-Level Science Club Natural Products Experiments

    Science.gov (United States)

    Sosabowski, Michael Hal; Olivier, George W. J.; Jawad, Hala; Maatta, Sieja

    2017-01-01

    Natural products are ubiquitous in nature but do not form a large proportion of the A-level syllabuses in the UK. In this article we briefly discuss a small selection of natural products, focusing on alcohols, aldehydes and ketones, and alkaloids. We then outline two natural product experiments that are suitable for A-level chemistry clubs or…

  18. Experience in applying lean production concepts in the service sector

    Directory of Open Access Journals (Sweden)

    Dyrina Evgeniya

    2016-01-01

    Full Text Available This article describes the experience of implementing lean production tools in the company services. The authors have based the research of the chef’s work, built Ishikawa’s diagram on one of the most important problems of the company and proposed the cyclogram of cooks at work. Problems were identified using this technology after analyzing domestic and foreign experience in implementing lean production. The algorithm for implementing lean production and the necessary tools for achievement of the goals of the enterprise were authored on the basis of experience gained analyses of theoretical materials, which were tested on the basis of the small business «White Dragon».

  19. User Experience Evaluation Methods in Product Development (UXEM'09)

    Science.gov (United States)

    Roto, Virpi; Väänänen-Vainio-Mattila, Kaisa; Law, Effie; Vermeeren, Arnold

    High quality user experience (UX) has become a central competitive factor of product development in mature consumer markets [1]. Although the term UX originated from industry and is a widely used term also in academia, the tools for managing UX in product development are still inadequate. A prerequisite for designing delightful UX in an industrial setting is to understand both the requirements tied to the pragmatic level of functionality and interaction and the requirements pertaining to the hedonic level of personal human needs, which motivate product use [2]. Understanding these requirements helps managers set UX targets for product development. The next phase in a good user-centered design process is to iteratively design and evaluate prototypes [3]. Evaluation is critical for systematically improving UX. In many approaches to UX, evaluation basically needs to be postponed until the product is fully or at least almost fully functional. However, in an industrial setting, it is very expensive to find the UX failures only at this phase of product development. Thus, product development managers and developers have a strong need to conduct UX evaluation as early as possible, well before all the parts affecting the holistic experience are available. Different types of products require evaluation on different granularity and maturity levels of a prototype. For example, due to its multi-user characteristic, a community service or an enterprise resource planning system requires a broader scope of UX evaluation than a microwave oven or a word processor that is meant for a single user at a time. Before systematic UX evaluation can be taken into practice, practical, lightweight UX evaluation methods suitable for different types of products and different phases of product readiness are needed. A considerable amount of UX research is still about the conceptual frameworks and models for user experience [4]. Besides, applying existing usability evaluation methods (UEMs) without

  20. Particle production and targeting experience at the Brookhaven AGS

    International Nuclear Information System (INIS)

    Lazarus, D.M.

    1986-01-01

    Experience in production of secondary pions (neutrinos), kaons and antiprotons by 28.5 GeV/c protons incident on various target materials is given. The problems associated with various target materials with respect to target heating, physical degradation and in some cases, disintegration, are discussed. The effect of target length and production angle on secondary beam flux and optical quality will be illustrated by some incomplete but nonetheless informative data

  1. Studies of W and Z production with the LHCb experiment

    CERN Document Server

    Shears, T G

    2009-01-01

    We report on studies of W and Z production with the LHCb experiment. Due to its acceptance, LHCb can probe a regime of low Bjorken x electroweak boson production, where parton distribution functions are not well constrained. In this review strategies for triggering, selection and background rejection are discussed, and studies of the sensitivity of differential cross-section measurements to the underlying parton density functions presented.

  2. Fission product behavior in the Molten Salt Reactor Experiment

    International Nuclear Information System (INIS)

    Compere, E.L.; Kirslis, S.S.; Bohlmann, E.G.; Blankenship, F.F.; Grimes, W.R.

    1975-10-01

    Essentially all the fission product data for numerous and varied samples taken during operation of the Molten Salt Reactor Experiment or as part of the examination of specimens removed after particular phases of operation are reported, together with the appropriate inventory or other basis of comparison, and relevant reactor parameters and conditions. Fission product behavior fell into distinct chemical groups. Evidence for fission product behavior during operation over a period of 26 months with 235 U fuel (more than 9000 effective full-power hours) was consistent with behavior during operation using 233 U fuel over a period of about 15 months (more than 5100 effective full-power hours)

  3. ALPtraum. ALP production in proton beam dump experiments

    International Nuclear Information System (INIS)

    Doebrich, Babette; Jaeckel, Joerg

    2015-12-01

    With their high beam energy and intensity, existing and near-future proton beam dumps provide an excellent opportunity to search for new very weakly coupled particles in the MeV to GeV mass range. One particularly interesting example is a so-called axion-like particle (ALP), i.e. a pseudoscalar coupled to two photons. The challenge in proton beam dumps is to reliably calculate the production of the new particles from the interactions of two composite objects, the proton and the target atoms. In this work we argue that Primakoff production of ALPs proceeds in a momentum range where production rates and angular distributions can be determined to sufficient precision using simple electromagnetic form factors. Reanalysing past proton beam dump experiments for this production channel, we derive novel constraints on the parameter space for ALPs. We show that the NA62 experiment at CERN could probe unexplored parameter space by running in 'dump mode' for a few days and discuss opportunities for future experiments such as SHiP.

  4. The Economy of Experience for the Promotion of Hotel Products

    Directory of Open Access Journals (Sweden)

    Tatiana G. Zainullina

    2017-09-01

    Full Text Available In this work, an attempt is made to use the terminology and tools of the economy of experience as applied to the hotel product. The analysis of the concept of "economy of experience" is analyzed from the point of view of changing human preferences and the appearance of the so-called "market ofexperience". The postulate is advanced that in the modern economy the sale of any goods and services corresponds with the sale of the corresponding impressions from using them, therefore the most successful business projects are aimed not only at satisfying physiological needs, impressions. The object of exchange is not only goods and services, but also impressions, respectively, the emergence of a new exchange object calls for the development of technologies that make this object more attractive to the direct consumer and show the manufacturer what benefits it can receive from the production and sale of impressions. An attempt has been made to transfer the tools of the economy of impressions to the area of promotion of the hotel product. The hotel economy is a dynamically developing branch of the economy, its development is determined by global economic processes, cultural, historical, sport interactions both within the country and between countries. Along with tourism, the hotel industry is an integral part of the creative economy and the economy of experience, which is based on the desires and needs of a person in gaining new experience. Practice shows that the use of tools in the promotion of the hotel product that affect the receipt of new impressions, feelings and experiences creates a basis for attracting regular customers, on which 60% of the income of the hotel company depends.

  5. Experiences with waste incineration for energy production in Denmark

    DEFF Research Database (Denmark)

    Kirkeby, Janus; Grohnheit, Poul Erik; Møller Andersen, Frits

    The Bioenergy Department in SENER have requested assistance with planning for the deployment of bioenergy (Biomass, biogas and waste incineration) in Mexico and information on Danish experiences with developing policy initiatives promoting bioenergy. This introduction to the Danish experiences...... with waste incineration for energy production use is compiled as preparation for SENER’s potential visit to Denmark in 2014. This report was prepared 19 June, 2014 by COWI DTU System Analysis to Danish Energy Agency (DEA) as part of a frame contract agreement....

  6. Effect of Physical Therapy Students' Clinical Experiences on Clinician Productivity.

    Science.gov (United States)

    Pivko, Susan E; Abbruzzese, Laurel D; Duttaroy, Pragati; Hansen, Ruth L; Ryans, Kathryn

    2016-01-01

    Physical therapy clinical education experiences (CEEs) are difficult to secure, particularly first-level CEEs. Our purpose was to determine 1) what impact student full-time CEEs have on PT clinician productivity and 2) whether there is a productivity difference between first vs final CEEs. Productivity logs, including possible factors impacting productivity, were distributed to clinician-student pairings on first and final CEEs. Two-week baseline data (without a student) were compared to weeks 1 and 6 (with a student) for 31 logs using a 2x4 repeated-measures ANOVA. In a subset of 17 logs for CEEs 8 weeks or longer, a 2x5 repeated-measures ANOVA was performed. There was a significant increase in the number of patients seen and CPT units billed by both levels of CEEs comparing weeks 1 and 6. In the subset of CEEs, 8 weeks or longer, there was a significant increase in the number of patients treated per hour at week 6 and a trend toward a change at week 8 when compared to baseline week A. The factors selected as impacting productivity were census (59%) and staffing (32%). Physical therapy clinician-student pairings showed an overall increase in productivity during both full-time first and final level CEEs.

  7. A Fresnel collector process heat experiment at Capitol Concrete Products

    Science.gov (United States)

    Hauger, J. S.

    1981-01-01

    An experiment is planned, conducted and evaluated to determine the feasibility of using a Power Kinetics' Fresnel concentrator to provide process heat in an industrial environment. The plant provides process steam at 50 to 60 psig to two autoclaves for curing masonry blocks. When steam is not required, the plant preheats hot water for later use. A second system is installed at the Jet Propulsion Laboratory parabolic dish test site for hardware validation and experiment control. Experiment design allows for the extrapolation of results to varying demands for steam and hot water, and includes a consideration of some socio-technical factors such as the impact on production scheduling of diurnal variations in energy availability.

  8. Fission product released experiment of coated fuel particles

    Energy Technology Data Exchange (ETDEWEB)

    Shijiang, Xu; Bing, Yang; Chunhe, Tang; Junguo, Zhu; Jintao, Huang; Binzhong, Zhang [Inst. of Nucl. Energy Technology, Tsinghua Univ., Beijing (China); Jinghan, Luo [Inst. of Atomic Energy, Beijing (China)

    1992-01-15

    Four samples of coated fuel particles were irradiated in the Heavy-Water Research Reactor of the Institute of Atomic Energy. Each of them was divided into two groups and irradiated to the burn up of 0.394% fima and 0.788% fima in two static capsules, respectively. After irradiation and cooling, post irradiation annealing experiment was carried out, the release ratios of the fission product {sup 133}Xe and {sup 131}I were measured, they are in the order of 10{sup -6}{approx}10{sup -7}. The fission product release ratio of naked kernel was also measured under the same conditions as for the coated fuel particles, the ratio of the fission product release of the coated fuel particles and of the naked kernel was in the order of 10{sup -5}{approx}10{sup -4}.

  9. Pion Production Measurement in NA61/SHINE Experiment for High Precision Neutrino Oscillation Experiments

    CERN Document Server

    Palczewski, Tomasz Jan

    2009-01-01

    One of physics goals of the NA61/SHINE experiment is a measurement of hadron production cross sections from proton-Carbon interactions at 31GeV/c for the T2K experiment at J-PARC. A precise knowledge of differential cross sections for pion and kaon production is of importance for improving the accuracy of neutrino flux simulations. The NA61 detector has a large angular acceptance, full coverage of the T2K phase space region, and good particle identification. In this work the analyses of negatively charged pion production are presented. Two different methods of negative pion selection and corrections for detector effects are discussed. Finally, preliminary dn/dp distributions of negatively charged pion in p+C interactions at 31 GeV/c are presented.

  10. Resonant production of dark photons in positron beam dump experiments

    Science.gov (United States)

    Nardi, Enrico; Carvajal, Cristian D. R.; Ghoshal, Anish; Meloni, Davide; Raggi, Mauro

    2018-05-01

    Positrons beam dump experiments have unique features to search for very narrow resonances coupled superweakly to e+e- pairs. Due to the continued loss of energy from soft photon bremsstrahlung, in the first few radiation lengths of the dump a positron beam can continuously scan for resonant production of new resonances via e+ annihilation off an atomic e- in the target. In the case of a dark photon A' kinetically mixed with the photon, this production mode is of first order in the electromagnetic coupling α , and thus parametrically enhanced with respect to the O (α2)e+e-→γ A' production mode and to the O (α3)A' bremsstrahlung in e- -nucleon scattering so far considered. If the lifetime is sufficiently long to allow the A' to exit the dump, A'→e+e- decays could be easily detected and distinguished from backgrounds. We explore the foreseeable sensitivity of the Frascati PADME experiment in searching with this technique for the 17 MeV dark photon invoked to explain the Be 8 anomaly in nuclear transitions.

  11. Recent results on dimuon production from the NA38 experiment

    International Nuclear Information System (INIS)

    Lourenco, C.

    1995-01-01

    We report on the production of intermediate and high mass muon pairs in p-A and S-U collisions, as measured by the NA38 experiment at the CERN SPS. The ratio between ψ' and J/ψ cross-sections is found to be constant in p-A interactions but decreases from p-A to S-U and as the released transverse energy, E T , increases. While the p-A intermediate mass continuum is well explained by the superposition of Drell-Yan and charm contributions, the signal observed in the S-U data is larger than the linear extrapolation of the proton-nucleus results. No correlation is seen between dimuon and direct photon production. (orig.)

  12. Physical basis of coastal productivity: The SEEP and MASAR experiments

    Science.gov (United States)

    Csanady, G. T.

    Two major cooperative experiments, code-named Shelf Edge Exchange Processes (SEEP) I and II, were carried out on the northeast U.S. continental shelf and slope by an interdisciplinary group of scientists in the past decade. The work, supported by the Department of Energy, Office of Health and Environmental Research, had the broad aim of determining whether or to what extent energy-related human activities interfere with the high biological productivity of coastal waters. Much of SEEP I work was reported in a dedicated issue of Continental Shelf Research, including a summary article on the experiment as a whole [Walsh et al., 1988[. A parallel experiment, supported by the Minerals Management Service and code-named Mid Atlantic Slope and Rise (MASAR), had the objective of exploring physical processes over the continental slope and rise, including especially currents in the upper part of the water column. A good deal of MASAR work was also reported in the SEEP issue just mentioned, mainly in an article by Csanady and Hamilton (1988). There have been other papers and publications on these experiments, and more are forthcoming. While many questions remain, our horizons have broadened considerably after a decade of work on this problem, as if our aeroplane had just emerged from clouds to expose an interesting landscape. In this article I shall try to describe the physical (-oceanographic) features of that landscape, not in the chronological order in which we have espied them, but as the logic of the subject dictates.

  13. World Nuclear University School of Uranium Production: Eight years' experience

    International Nuclear Information System (INIS)

    Trojacek, J.

    2014-01-01

    The World Nuclear University School of Uranium Production was established by DIAMO, state enterprise in 2006 year under the auspices of the World Nuclear University in London in partnership with international nuclear organizations – OECD/NEA and IAEA. Using the expertise and infrastructure of DIAMO State Enterprise, in conjuction with national and international universities, scientific institutions, regulatory authorities and other individual experts, the “school” covers its mission with the aim to provide world-class training on all aspects of uranium production cycle to equip operators, regulators and executives with the knowledge and expertise needed to provide expanded, environmentally-sound uranium mining throughout the world: • to educate students on all aspects of uranium production cycle including exploration, planning, development, operation, remediation and closure of uranium production facilities; • to improve the state of the art of uranium exploration, mining and mine remediation through research and development; • to provide a forum for the exchange of information on the latest uranium mining technologies and experiences – best practices.

  14. WWγ and WZγ production at the ATLAS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Baas, Alessandra Edda

    2017-07-26

    The study of three electroweak gauge bosons is not only a precise test of the electroweak structure of the Standard Model, but it is also sensitive to new physics. In this thesis, the measurement of WWγ and WZγ production in proton-proton collisions is presented, in which events are analysed where the W boson decays leptonically and the other heavy gauge boson decays hadronically. Two decay channels differing in the flavour of the final state lepton are studied: the electron and the muon channel. The analysed proton-proton collisions are recorded in 2012 with the ATLAS experiment at a centre-of-mass energy of √(s) = 8 TeV and correspond to an integrated luminosity of 20.2 fb{sup -1}. Exclusion limits on the production cross section are derived at 95 % confidence level (CL) in two different phase space regions: one is optimised for the Standard Model production and one for the search of new physics beyond the Standard Model. The best upper limits on the WWγ and WZγ production, determined in this analysis, exclude cross sections above 2.5 times the Standard Model expectation. In addition, Frequentist limits at 95% CL are derived on fourteen different anomalous quartic gauge couplings of mass dimension eight, using the framework of an effective field theory. The exclusion limits are presented with and without unitarisation.

  15. An experiment on particle and jet production at midrapidity

    International Nuclear Information System (INIS)

    Kadija, K.; Paic, G.; Vranic, D.; Brady, F.P.; Draper, J.E.; Romero, J.L.; Carroll, J.; Ghazikhanian, V.; Gulmez, E.; Igo, G.J.; Trentalange, S.; Whitten, C. Jr.; Cherney, M.; Heck, W.; Renfordt, R.E.; Roehrich, D.; Stock, R.; Stroebele, H.; Wenig, S.; Hallman, T.; Madansky, L.; Anderson, B.; Keane, D.; Madey, R.; Watson, J.; Bieser, F.; Bloomer, M.A.; Cebra, D.; Christie, W.; Friedlander, E.; Greiner, D.; Gruhn, C.; Harris, J.W.; Huang, H.; Jacobs, P.; Lindstrom, P.; Matis, H.; McParland, C.; Naudet, C.; Odyniec, G.; Olson, D.; Poskanzer, A.M.; Rai, G.; Rasmussen, J.; Ritter, H.G.; Schambach, J.; Schroeder, L.S.; Seidl, P.A.; Symons, T.J.M.; Tonse, S.; Wieman, H.; Carmony, D.D.; Choi, Y.; Hirsch, A.; Hjort, E.; Porile, N.; Scharenberg, R.P.; Srivastava, B.; Tincknell, M.L.; Chacon, A.D.; Wolf, K.L.; Dominik, W.; Gazdzicki, M.; Braithwaite, W.J.; Cramer, J.G.; Prindle, D.; Trainor, T.A.; Breskin, A.; Chechik, R.; Fraenkel, Z.; Shor, A.; Tserruya, I.

    1990-09-01

    The aim of this experiment is to search for signatures of Quark-Gluon Plasma (QGP) formation and investigate the behavior of strongly interacting matter at high energy density. Since there is no single accepted signature for the QGP, it is essential to use a flexible detection system at RHIC that can simultaneously measure many experimental observables. The experiment will utilize two aspects of hadron production that are fundamentally new at RHIC: correlations between global observables on an event-by-event basis and the use of hard scattering of partons as a probe of the properties of high density nuclear matter. The event-by-event measurement of global observables--such as temperature, flavor composition, collision geometry, reaction dynamics, and energy or entropy density fluctuations--is possible because of the very high charged particle densities. Event-by-event fluctuations are expected in the vicinity of a phase change, so experiments must be sensitive to threshold-like features in experimental observables as a function of energy density. Full azimuthal coverage with good particle identification and continuous tracking is required to perform these measurements at momenta where the particle yields are maximal. Measurable jet yields at RHIC will allow investigations of hard QCD processes via both highly segmented calorimetry and high p t single particle measurements in a tracking system. A systematic study of particle and jet production will be carried out over a range of colliding nuclei from p + p through Au + Au, over a range of impact parameters from peripheral to central, and over the range of energies available at RHIC. Correlations between observables will be made on an event-by-event basis to isolate potentially interesting event types. In particular, correlations of jet properties with full event reconstruction may lead to some surprising new physics

  16. Experience curve for natural gas production by hydraulic fracturing

    International Nuclear Information System (INIS)

    Fukui, Rokuhei; Greenfield, Carl; Pogue, Katie; Zwaan, Bob van der

    2017-01-01

    From 2007 to 2012 shale gas production in the US expanded at an astounding average growth rate of over 50%/yr, and thereby increased nearly tenfold over this short time period alone. Hydraulic fracturing technology, or “fracking”, as well as new directional drilling techniques, played key roles in this shale gas revolution, by allowing for extraction of natural gas from previously unviable shale resources. Although hydraulic fracturing technology had been around for decades, it only recently became commercially attractive for large-scale implementation. As the production of shale gas rapidly increased in the US over the past decade, the wellhead price of natural gas dropped substantially. In this paper we express the relationship between wellhead price and cumulative natural gas output in terms of an experience curve, and obtain a learning rate of 13% for the industry using hydraulic fracturing technology. This learning rate represents a measure for the know-how and skills accumulated thus far by the US shale gas industry. The use of experience curves for renewable energy options such as solar and wind power has allowed analysts, practitioners, and policy makers to assess potential price reductions, and underlying cost decreases, for these technologies in the future. The reasons for price reductions of hydraulic fracturing are fundamentally different from those behind renewable energy technologies – hence they cannot be directly compared – and hydraulic fracturing may soon reach, or maybe has already attained, a lower bound for further price reductions, for instance as a result of its water requirements or environmental footprint. Yet, understanding learning-by-doing phenomena as expressed by an industry-wide experience curve for shale gas production can be useful for strategic planning in the gas sector, as well as assist environmental policy design, and serve more broadly as input for projections of energy system developments. - Highlights: • Hydraulic

  17. J/ψ production study at the LHCb experiment

    International Nuclear Information System (INIS)

    Qian, Wenbin

    2010-09-01

    The LHCb experiment is one of the four main experiments at the LHC. Dedicated to b physics studies, the primary goal of the LHCb experiment is to explore possible New Physics beyond the Standard Model through the studies of rare decays of charm and beauty-flavored hadrons and precision measurements of CP-violating observables. In this thesis, studies of J/ψ production at LHCb are presented based on fully-simulated Monte Carlo events generated at a center-of-mass energy of 14 TeV and a luminosity of 2*10 32 cm -2 s -1 . The study shows that 6.5*10 6 J/ψ events can be reconstructed in every pb -1 of data, with a mass resolution of 11 MeV/c 2 and a S/B ∼ 18 in a ±3σ mass window. With 0.79 pb -1 of data, we can achieve a 10% precision for majority of the bins. Possible systematic errors are estimated to be at the same level. The study also shows that the polarization of the J/ψ plays an important role in the cross-section determinations. It may contribute to a systematic uncertainty up to 30% in some p T and η bins. Such an effect can be well reduced once an analysis on the J/ψ polarization is performed simultaneously. The measurement of the polarization parameters will also help in the understanding of the J/ψ production mechanism. In order to reduce the amount of simulated data needed for the efficiency estimations, a method is developed to describe the 2-D efficiency by three parameters and all the errors except statistic errors from data will depend on the three parameters. As the real LHCb experiment has already collected 14 nb -1 of data, part of the J/ψ analysis can be performed. Around 3,000 J/ψ candidates are reconstructed with a mass resolution of 16 MeV/c 2 and a S/B ∼ 1 in a 3σ mass window. Based on the above sample, the cross sections as a function of p T are obtained. The preliminary cross section for J/ψ in the region p T belonging to [0, 9] GeV/c and y belonging to [2.5, 4] is (7.6 ± 0.3) μb where only the statistical error is quoted

  18. Prompt lepton production in a proton beamdump experiment

    International Nuclear Information System (INIS)

    Bergsma, M.

    1990-01-01

    In this thesis the results of a 400 GeV proton on copper beam dump experiment performed at the European centre for high energy physics CERN in Geneva are described, concerning the production of prompt neutrinos and muons. The CHARM-I neutrino detector, a fine-grained sampling calorimeter with large fiducial mass, was used to record neutrino interactions. The muon energy spectrum was determined by measuring the muon flux at several depths in an iron muon shield just downstream of the dump. The prompt event rates were separated from the conventional event rates by the technique of extrapolation to 'infinite' target density. Two targets of different density were used, one made of solid copper and a copper/air segmented one, with one-third density of the first. The distance between dump and neutrino detector was 490 m. The amount of protons on the high density target was 13.26x10 17 and on the low density target 6.35x10 17 . The assymetry between prompt muon neutrinos and prompt electron neutrinos was found to be 0.21 ] 0.08 ] 0.03 for neutrino energy above 20 GeV. A review of results from other experiments on this asymmetry is presented. The production of charmed hadrons is discussed. A cross-section for the production of D-mesons was found 921 ] 150 (stat.) ] 149 (syst.) per nucleus for 400 GeV protons on copper with A = 63.5. For the relative coupling strengths of ν e and ν μ to the weak neutral current a value of 1.05 + 0.15 - 0.18 is derived. This value is in agreement with universality of electron neutrino and muon neutrino for the weak interaction. Concerning the production of tau neutrinos, an 90% C.L. upper limit was found for the tau-neutrino flux of -6 with 90% C.L. (author). 111 refs.; 58 figs.; 50 tabs

  19. Production Experiences with the Cray-Enabled TORQUE Resource Manager

    Energy Technology Data Exchange (ETDEWEB)

    Ezell, Matthew A [ORNL; Maxwell, Don E [ORNL; Beer, David [Adaptive Computing

    2013-01-01

    High performance computing resources utilize batch systems to manage the user workload. Cray systems are uniquely different from typical clusters due to Cray s Application Level Placement Scheduler (ALPS). ALPS manages binary transfer, job launch and monitoring, and error handling. Batch systems require special support to integrate with ALPS using an XML protocol called BASIL. Previous versions of Adaptive Computing s TORQUE and Moab batch suite integrated with ALPS from within Moab, using PERL scripts to interface with BASIL. This would occasionally lead to problems when all the components would become unsynchronized. Version 4.1 of the TORQUE Resource Manager introduced new features that allow it to directly integrate with ALPS using BASIL. This paper describes production experiences at Oak Ridge National Laboratory using the new TORQUE software versions, as well as ongoing and future work to improve TORQUE.

  20. Wireline tractor production logging experience in Australian horizontal wells

    Energy Technology Data Exchange (ETDEWEB)

    Local, E.; Searight, T. L.

    1998-12-31

    Australian experiences with the development of new wireline tractor technology and its successful application to deploy production logging tools in horizontal wells was discussed. Dynamics of the tractor operations have been modelled and the model was validated with field data. The field data was also used to quantify borehole friction coefficients. Successful application in the field indicates that the tough tubing capability of the tractor, combined with its capacity to drive in large casing sizes, makes wireline deployment possible in a wide range of well completions. Work on a number of new applications such as the capability to negotiate complex downhole hardware, and to intervene in completions with widely differing tubing diameters, is in progress. 5 refs., 1 tab., 10 figs.

  1. Production of mineral aggregates in quartz tumbling experiments

    Science.gov (United States)

    Nørnberg, Per; Finster, Kai; Pall Gunnlaugsson, Haraldur; Knak Jensen, Svend; Merrison, Jonathan Peter

    2013-04-01

    Introduction Tumbling experiments with quartz sand with the purpose of tracing the effect of broken bonds in mineral surfaces resulted in an unexpected production of aggregates. These aggregates are a few microns in diameter, spherical and resembling tiny white "snowballs." Particle comminution by aeolian and other natural weathering processes are known in soil science and is often seen as an increase of fine particles towards the top of soil profiles (Nørnberg, P. 1987, 1988, 2002, J.S. Wright 2007). When mineral grains collide in aeolian processes they break up along weakness zones in the crystal lattice. This mechanism causes broken bonds between atoms in the crystal lattice and results in reactive groups in the mineral surface. This mechanism provides the background for experiments to investigate the oxidation processes of magnetite on the planet Mars. The primary magnetic iron oxide phase on Mars is to day known to be magnetite and the colour of the dust on Mars is most likely due to hematite. To investigate if the oxidation process could take place without going over dissolution and precipitation in water, experiments with tumbling of quartz grains in sealed glass containers along with magnetite were started. The idea was that activated bonds at the surface of quartz could oxidize magnetite and convert it to hematite over time. This proved to be the case (Merrison, J.P. et al. 2010). However, in these experiments we observed the formation of the white aggregates which has been the subject of the study that we present here. Results of tumbling experiments Commercially available quarts (Merck) was sieved to obtain the fraction between 125 and 1000 µm. This fraction was tumbled in glass containers for months and resulted in production of a significant amount of fine grained material (Merrison, J.P et al. 2010). A part of this fine fraction consists of the "snowball"-like aggregates which is a fragile element with relatively high specific surface. The physical

  2. Antihydrogen Production and Precision Experiments The ATHENA Collaboration

    CERN Multimedia

    Filippini, V

    2002-01-01

    The ATHENA (AnTiHydrogEN Apparatus) experiment has the goal of producing slow antihydrogen atoms and comparing their physical properties to those of hydrogen. For example, the measurement of the 1S-2S transition offers the possibility for comparing hydrogen and antihydrogen to a precision of 1 part in 10$^{15}$, owing to the long lifetime of the metastable 2S state (122 msec). This would be the most precise test of CPT invariance in the lepton and baryon sector. The first phase of the experiment, which has been installed and commissioned at the Antiproton Decelerator (AD) - is devoted to the study of antihydrogen production. For this purpose, about 10$^{5}$ antiprotons (p=100 MeV/c ) are trapped and cooled to milli-eV energies. Independently, about 10$^{8}$ low energy positrons per minute are collected in the positron accumulator, using a Na-22 source (2 GBq). Formation of antihydrogen will take place in the recombination region, where the antiproton cloud is made to interact with the dense positron plasma tr...

  3. Production of hollow microspheres for inertial confinement fusion experiments

    International Nuclear Information System (INIS)

    Cook, R.

    1994-12-01

    The targets used in inertial confinement fusion (ICF) experiments at the Lawrence Livermore National Laboratory are plastic capsules roughly 0.5 mm in diameter. The capsules, which typically have wall thicknesses from 20 to 60 μm, must possess extraordinary symmetry and concentricity and must have surface finishes of less than 1000 Angstrom peak-to-valley variation over surface contours of from 10 to 100's of μm. This paper reviews the fabrication of these capsules, focusing on the production of the thin-walled polystyrene microshell mandrel around which the capsule is built. The relationship between the capsule characteristics, especially surface finish, and capsule performance is discussed, as are the methods of surface characterization and modification necessary for experiments designed to study the effects of surface roughness on implosion dynamics. Targets for the next generation of ICF facilities using more powerful laser drivers will have to be larger while meeting the same or even more stringent symmetry and surface finish requirements. Some of the technologies for meeting these needs are discussed briefly

  4. Charm and beauty production in experiment WA92

    International Nuclear Information System (INIS)

    Barberis, D.; Gemme, C.; Malferrari, L.

    1999-01-01

    Using a sample of 1.4·10 8 triggered events, produced in π-Cu and π-W interactions at 350 GeV/c, we have studied charm and beauty production. J/ψ and ψ ' mesons are identified through their decays into muon pairs and are selected in the Feynman-x range x F >0. Inclusive J/ψ and ψ ' cross-sections and J/ψ differential cross-sections as functions of x F and p T are measured. A fit to the data for different targets gives α(J/ψ){Si,Cu,W}=0.87±0.05 (stat.)±0.04 (syst.), σ 0 (J/ψ)=(216.2±5.4 (stat.)±13.3 (syst.)) nb/nucleon and σ 0 (ψ ' )=(28.3±8.1(stat.)±11.3 (syst.)) nb/nucleon. For the study of beauty production, we have identified 26 beauty events. The estimated background in this sample is 0.6±0.6 events. From these data, assuming a linear A-dependence, we measure a beauty production cross-section integrated over all x F of 5.7 -1.1 +1.3 (stat.) -0.5 +0.6 (syst.) nb/N. Differential distributions with respect to x F and p T 2 have been determined as well as some two-particle kinematic variables. Our results are compared with previous experiments and with a next-to-leading-order QCD calculation

  5. Toxicity of magnesium alloy biodegradation products in experiment

    Directory of Open Access Journals (Sweden)

    Yu. M. Neryanov

    2013-08-01

    significant differences in this index, so there is no reason to believe that the products of biodegradation of the implant provoke cell dying. For a more complete assessment of the pro- and antioxidant processes against the implanted clip in the body, we studied the degree of oxidative modification of proteins plasma. No significant differences in plasma levels of intact animals and experimental groups such as molecular markers: average mass, nucleic acid and the stable metabolites of nitric oxide have been received. Conclusion 1. It was established experimentally that products of modified magnesium alloy ML-10 biocorrosion did not have toxic effects on body tissues and didn’t enhance cellular destruction, that was evidenced by the absence of endogenous intoxication signs and oxidative damage of functional macromolecules. 2. Gradual (for seven months metabolization of metal fixator consisting of biodegradable magnesium alloy ML-10 in white mongrel male rats was accompanied by the absence of violations of physiological manifestations in experimental animals. 3. Better prognosis for the possibility of studying the use of metal fixators consisting of biodegradable magnesium alloy ML-10 in humans can be done on the base of the experiment results.

  6. Experiences with a procedure for modeling product knowledge

    DEFF Research Database (Denmark)

    Hansen, Benjamin Loer; Hvam, Lars

    2002-01-01

    This paper presents experiences with a procedure for building configurators. The procedure has been used in an American company producing custom-made precision air conditioning equipment. The paper describes experiences with the use of the procedure and experiences with the project in general....

  7. Slow or swift, your patients' experience won't drift: absence of correlation between physician productivity and the patient experience.

    Science.gov (United States)

    Lenz, Kasia; McRae, Andrew; Wang, Dongmei; Higgins, Benjamin; Innes, Grant; Cook, Timothy; Lang, Eddy

    2017-09-01

    Absract OBJECTIVES: To evaluate the relationship between Emergency Physician (EP) productivity and patient satisfaction with Emergency Department (ED) care. This retrospective observational study linked administrative and patient experience databases to measure correlations between the patient experience and EP productivity. The study was performed across three Calgary EDs (from June 2010 to July 2013). Patients>16 years old with completed Health Quality Council of Alberta (HQCA) ED Patient Experience Surveys were included. EP productivity was measured at the individual physician level and defined as the average number of patients seen per hour. The association between physician productivity and patient experience scores from six composite domains of the HQCA ED Patient Experience Survey were examined using Pearson correlation coefficients, linear regression modelling, and a path analysis. We correlated 3,794 patient experience surveys with productivity data for 130 EPs. Very weak non-significant negative correlations existed between productivity and survey composites: "Staff Care and Communication" (r=-0.057, p=0.521), "Discharge Communication" (r=-0.144, p=0.102), and "Respect" (r=-0.027, p=0.760). Very weak, non-significant positive correlations existed between productivity and the composite domains: "Medication Communication" (r=0.003, p=0.974) and "Pain management" (r=0.020, p=0.824). A univariate general linear model yielded no statistically significant correlations between EP productivity and patient experience, and the path analysis failed to show a relationship between the variables. We found no correlation between EP productivity and the patient experience.

  8. Radioisotope production experience at the Cintichem 5-MW research reactor

    International Nuclear Information System (INIS)

    McGovern, J.J.

    1993-01-01

    The Cintichem radiochemical production facility was constructed in the late 1950s and became operational in October of 1961. The facility was originally designed and constructed by Union Carbide Corporation for research and development of nuclear technology with the ultimate objective of exploiting it commercially. Research projects were conducted in the fields of direct energy conversion for the production of electric power and chemical synthesis, neutron spectrometry, nuclear fuel cycle development, and radiochemical production. Radiochemical production for medical applications was the only development project that was successfully commercialized

  9. Improving product quality and reliability with customer experience data

    NARCIS (Netherlands)

    Brombacher, A.C.; Hopma, E.E.; Ittoo, A.; Lu, Y.; Luyk, I.M.; Maruster, L.; Ribeiro, J.T.S.; Weijters, A.J.M.M.; Wortmann, J.C.

    2012-01-01

    Advance technology development and wide use of the World Wide Web have made it possible for new product development organizations to access multi-sources of data-related customer complaints. However, the number of customer plaints of highly innovative consumer electronic products is still

  10. Improving Product Quality and Reliability with Customer Experience Data

    NARCIS (Netherlands)

    Brombacher, Aarnout; Hopma, Eva; Ittoo, Ashwin; Lu, Yuan; Luyk, Ilse; Maruster, Laura; Ribeiro, Joel; Weijters, Ton; Wortmann, Hans

    2012-01-01

    Advance technology development and wide use of the World Wide Web have made it possible for new product development organizations to access multi-sources of data-related customer complaints. However, the number of customer plaints of highly innovative consumer electronic products is still

  11. Consumer choice of modularized products : a conjoint choice experiment approach

    NARCIS (Netherlands)

    B.G.C. Dellaert (Benedict); A.W.J. Borgers (Aloys); J.J. Louviere (Jordan); H.J.P. Timmermans (Harry)

    1998-01-01

    textabstractRecent increases in flexibility and automation in the production of goods and services allow a growing number of suppliers to offer their products in flexible sets of modules from which consumers can create their own individualized packages. This paper addresses the question how consumer

  12. Consumer Choice of Modularized Products : A Conjoint Choice Experiment Approach

    NARCIS (Netherlands)

    Dellaert, B.G.C.; Borgers, A.W.J.; Louviere, J.; Timmermans, H.J.P.

    1998-01-01

    Recent increases in flexibility and automation in the production of goods and services allow a growing number of suppliers to offer their products in flexible sets of modules from which consumers can create their own individualized packages. This paper addresses the question how consumer choices of

  13. Integrated product development and experience of communication in education

    NARCIS (Netherlands)

    H. Ihle; Ir. Dick van Schenk Brill; Ir. Peter van Kollenburg; Ir. H.E.V. Veenstra

    2000-01-01

    The Technical Departments at the Fontys University of Professional Education in Eindhoven, The Netherlands, offer a course which is devel-oped around the principles of Concurrent Engi-neering. Integrated Product Development (IPD) project teams are multi-disciplinary groups which develop products in

  14. Energy production forecasting, experiences from Lillgrund. Lillgrund Pilot Project

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, Lasse; Schelander, Peter; Haakansson, Maans; Hansson, Johan (Vattenfall Vindkraft AB, Stockholm (Sweden))

    2010-01-15

    Forecasts of energy production at Lillgrund are being made with the prediction tool WPPT. The forecasts are updated every hour with observed wind- and production data. WPPT combines statistical and physical methods and the nature of the model changes with time. In the very short range, the observed data is the dominant factor predicting energy production while the physical methods, e.g. the weather forecasts, gradually are given more weight as we go further away from the production hour. Until recently Vattenfall has relied solely on weather forecasts from one institute, namely DMI (The Danish Meteorological Institute), in predicting the energy produced at Lillgrund. The uncertainty in the forecast has been given some attention but since only one source of information has been available the possibilities of a comprehensive uncertainty analysis has been limited. To meet the growing demand for quality and delivery reliability, Vattenfall has begun to purchase additional weather data from the Swedish supplier WeatherTech Scandinavia. These data will be used together with data from DMI. You get a kind of ensemble forecast approach. The difference in structure, configuration and physical approaches of the models presumably makes the model related forecast errors uncorrelated. This lays the path for quality improvements when the different forecasts are combined optimally. WPPT has been used in forecasting the energy production at Lillgrund since production began in 2007. The average absolute error in the production forecast / turbine is 0.17 MW. If WPPT only relied on a persistence forecast for the next 24 hours the error will become almost three times as high. So far WPPT has a skill score of 86% in the 24-hour forecasts compared to an assumption of persistence. There is a clearly visible pattern that WPPT underestimates production in situations with strong winds and conversely overestimate production when winds are weak. This is also typical for pure persistence

  15. The main injector particle production experiment at Fermilab

    Indian Academy of Sciences (India)

    Abstract. We describe the physics capabilities and status of the MIPP experiment which concluded its physics data taking run in March 2006. We show some preliminary results from this run and describe plans to upgrade the spectrometer.

  16. The main injector particle production experiment at Fermilab

    Indian Academy of Sciences (India)

    MIPP experiment represents the electronic equivalent of the bubble chamber with ... Another measurement MIPP hopes to make in the upgraded mode is that of pion and proton cross-sections off liquid nitrogen targets for the better prediction.

  17. Experience as Knowledge in a New Product Development Team: Implications for Knowledge Management

    Science.gov (United States)

    Cooper, Lynne P.

    2009-01-01

    This study was conducted to better understand how New Product Development (NPD) team members apply their experiences to meet the task needs of their project. Although "experience" is highly valued in team members, little research has looked specifically at experiences as a type of knowledge, and how this knowledge is used in work settings. This research evaluated nearly 200 instances where team members referenced past experiences during team meetings. During these experience exchanges, team members structured the sharing of their experiences to include three common elements: the source of the experience, the nature of the experience, and the degree of relevance to the current work of the team. The experiences fell into four categories: people (relationships), process, product, and politics. This paper describes how team members structured, applied, and integrated their individual experiences and presents the resulting implications for knowledge management systems that wish to exploit experience knowledge.

  18. Production and spectroscopy of quarkonia states at the ATLAS experiment

    CERN Document Server

    Price, D; The ATLAS collaboration

    2014-01-01

    This presentation will cover ATLAS results in the domain of charmonium production, including J/psi, psi(2s) and chi_c states. The analyses discussed include double-differential production cross-section measurements of the J/psi, psi(2S) and P-wave charmonium states chi_cJ, extending upon previous measurements in precision and kinematic reach. Prompt and non-prompt modes are distinguished, as well as J/psi vs psi(2s) and the contribution to J/psi production from chi_c feed-down. Alongside the latter analysis, a competitive measurement of the branching fraction B± --> chi_c1 + K± was also performed. Results of the measurements are compared with the latest theoretical predictions from a variety of theoretical approaches.

  19. Cowley Ridge wind plant experiences best production year ever

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    The Cowley Ridge wind plant in southern Alberta in its fifth year of operation generated 63,380 MWh of electricity, exceeding its annual goal by about 15 per cent. December was one of the highest production months ever. During December the plant operated an an average of 62 per cent capacity throughout the month. The annual average is 35 per cent of capacity

  20. Experiences in the containerized tree seedlings forest nurseries production

    Directory of Open Access Journals (Sweden)

    Eduardo González-Izquierdo

    2014-12-01

    Full Text Available The work summarizes the results of the research carried out by the team of forest nurseries at Sustainable Forest Management Group in Pinar del Río University Forest Research Centre in the last 25 years. The characteristics of seedlings quality are presented, the best growing media, the water management to harden the forest species under the ecological conditions of more and more lingering periods of drought. The studied forest species were: Talipariti elatum (Sw. Fryxell, Pinus tropicalis Morelet , Swietenia mahagon(L.Jacq. Swietenia macrophylla King, Caesalpinia violacea (Mill. Stand, Genipa americana L, Gerascanthus gerascanthoides (Kunth Borhidi y Cedrela odorata L. y Eucalyptus grandis Hill ex Maiden. The main results can be summarized in the following way: the size of the containers oscillates between 90 and 300 cubic centimeters; the growing media combines organic and composted components fundamentally of Pinus caribaea and Eucalyptus ssp bark., with proportions that they vary according to the species and the disposability of these components in the nurseries where the plants take place; for the water management hardening procedures were used by watering in last month of the cultivation. In general the economic analyses demonstrated the decrease of the production costs for seedlings with the employment of this novel technology, the same as their advantages on the traditional technology of seedlings production in polybags: humanization of manpower work in forest nursery, reduction of costs production, improvement of produced seedling quality and productivity increase of their workers.

  1. The Experience on Geopolymer Technology in Semi-Industrial Production

    Czech Academy of Sciences Publication Activity Database

    Boura, P.; Ertl, Z.; Hanzlíček, Tomáš; Perná, Ivana

    2012-01-01

    Roč. 2, č. 4 (2012), s. 300-305 ISSN 2161-6221 Institutional research plan: CEZ:AV0Z30460519 Keywords : geopolymer * semi-industrial * production Subject RIV: JI - Composite Materials http://davidpublishing.org/journals_show_abstract.html?5272-0

  2. Experience curve for natural gas production by hydraulic fracturing

    NARCIS (Netherlands)

    Fukui, R.; Greenfield, C.; Pogue, K.; van der Zwaan, B.

    From 2007 to 2012 shale gas production in the US expanded at an astounding average growth rate of over 50yr, and thereby increased nearly tenfold over this short time period alone. Hydraulic fracturing technology, or ``fracking'', as well as new directional drilling techniques, played key roles in

  3. Data Mining to Capture User-Experience: A Case Study in Notebook Product Appearance Design

    OpenAIRE

    Rhoann Kerh; Chen-Fu Chien; Kuo-Yi Lin

    2014-01-01

    In the era of rapidly increasing notebook market, consumer electronics manufacturers are facing a highly dynamic and competitive environment. In particular, the product appearance is the first part for user to distinguish the product from the product of other brands. Notebook product should differ in its appearance to engage users and contribute to the user experience (UX). The UX evaluates various product concepts to find the design for user needs; in addition, help the designer to further u...

  4. Changing public perceptions of genetically modified foods: Effects of consumer information and direct product experience

    DEFF Research Database (Denmark)

    Scholderer, Joachim; Bech-Larsen, Tino; Grunert, Klaus G.

    and values. Two policies can be adopted in such a situation: (a) consumers can be actively informed regarding the risks and benefits and (b) consumers can be given the opportunity to evaluate products on the basis of direct experience. The effectiveness of both policies was tested in two experiments....... In experiment 1, attitude change experiments were conducted with consumers from Denmark, Germany, Italy and the UK (N=1650). Different information strategies were tested against a control group for their ability to change consumers' attitudes and their influence on product choice. Results indicate...... that no attitude change occured. Instead, all stategies seemed to bolster pre-existing attitudes, thereby significantly decreasing consumers' preferences for GM products. The effect did not occur when consumers only saw a labeled product example. In experiment 2, we tested the effects of direct experience...

  5. MODELLING CONSUMERS' DEMAND FOR ORGANIC FOOD PRODUCTS: THE SWEDISH EXPERIENCE

    Directory of Open Access Journals (Sweden)

    Manuchehr Irandoust

    2016-07-01

    Full Text Available This paper attempts to examine a few factors characterizing consumer preferences and behavior towards organic food products in the south of Sweden using a proportional odds model which captures the natural ordering of dependent variables and any inherent nonlinearities. The findings show that consumer's choice for organic food depends on perceived benefits of organic food (environment, health, and quality and consumer's perception and attitudes towards labelling system, message framing, and local origin. In addition, high willingness to pay and income level will increase the probability to buy organic food, while the cultural differences and socio-demographic characteristics have no effect on consumer behaviour and attitudes towards organic food products. Policy implications are offered.

  6. Beauty production at HERA using the ZEUS experiment

    International Nuclear Information System (INIS)

    Yaguees, A

    2008-01-01

    Beauty quark production in ep collisions is being studied with the ZEUS detector at HERA. The latest measurements of beauty production in deep inelastic scattering and photoproduction regime are presented. The first measurement exploits the potential of the ZEUS microvertex detector to identify beauty in photoproduction dijet events with a muon in the final state. The second is based on statistical methods to determine the fraction of beauty in photoproduction dijet events with an electron in the final state. Finally, the first measurement by ZEUS of the beauty contribution to the proton structure function, F 2 bb, in deep inelastic scattering is presented. The three measurements are compared with QCD predictions as well as with previous results. All the results presented here are preliminary

  7. Study on Customer Experience Dimension Based on Online Shopping reviews of MI’s Products

    Directory of Open Access Journals (Sweden)

    Wang Lin

    2017-01-01

    Full Text Available This study has selected sorts of comments about MI’s products from its customers’ as research objects, then we used the theory of Rooting to analyze those objects, and explored the Customer Experience Dimensions’ type, characteristics and the way to impact others. The results come as follows: First of all, the Customers Experience Dimensions are consisted of nine major categories defined as Value Perception Experience, Sensory Experience, Quality Assurance Experience, Parts Experience, Purchase Experience, Service Experience, Brand Comparison Experience, Compensating Experience, Brand Reliance Experience respectively. Secondly, we put these nine major categories above all to compare the conclusions with the previous research, then we analyzed and integrated them, and finally obtained seven major categories containing Purchasing Website, Product Rendering, Delivery Experience, Transaction Convenience, Safety and Security, Brand Reliance, Marketing Communications respectively. In addition, we have conducted a further investigation to draw three types about the Customer Experience named Function Experience, Purchasing and Service Experience, and Brand Experience. Last but not the least, this paper has definitely provided the basis theory of how does the Customer Experience affect the Brand Loyalty for future research, as well as guided a definite orientation.

  8. Simulation of Top Quark Production for the ATLAS Experiment

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00352736; The ATLAS collaboration

    2016-01-01

    The Monte Carlo setups used by ATLAS to model the $t\\bar{t}$ and single-top production in 13 TeV pp collisions are described. The performance of different event generators is assessed by comparing measurements at 7 TeV, 8 TeV and 13 TeV to predictions from simulated data. The evaluation of systematic uncertainties and the dependence of generator predictions on the tuning parameters are also discussed.

  9. National experience in radiosterelization or radiodescontamination of biological products

    International Nuclear Information System (INIS)

    Padron, E.; Romay, Z.; Otero, I.; Chavez, A.; Prieto, E.; Sainz, D.; Rodriguez, R.; Diaz, D.

    1997-01-01

    The ionizing radiations are especially important when other chemical and physical methods can't be used, or they don't give the result required, for which the employment of advanced technologies for the sterilization is found in ascent at world level. To such effect, the International Atomic Energy Agency has, sponsored a coordinated program for the radiosterilization of medical and biological products in Latin America, in which Cuba participates. (author) [es

  10. Does the Unemployement Benefit Institution Affect the Productivity of Workers? Evidence from a Field Experiment

    NARCIS (Netherlands)

    Blanco, M.; Dalton, P.S.; Vargas, J.F.

    2013-01-01

    Abstract: We investigate whether and how the type of unemployment bene t institution affects productivity. We designed a field experiment to compare workers' productivity under a welfare system, where the unemployed receive an unconditional monetary transfer, with their productivity under a workfare

  11. MHTGR: New production reactor summary of experience base

    International Nuclear Information System (INIS)

    1988-03-01

    Worldwide interest in the Modular High-Temperature Gas-Cooled Reactor (MHTGR) stems from the capability of the system to retain the advanced fuel and thermal performance while providing unparalleled levels of safety. The small power level of the MHTGR and its passive systems give it a margin of safety not attained by other concepts being developed for power generation. This report covers the experience base for the key nuclear system, components, and processes related to the MHTGR-NPR. 9 refs., 39 figs., 9 tabs

  12. Marketing experience with radurised products in South Africa

    International Nuclear Information System (INIS)

    Van der Linde, H.J.

    1983-01-01

    The South African food irradiation program is a joint undertaking of the Nuclear Development Corporation and the Department of Agriculture. After almost a decade of research and development, it was decided to proceed to the commercialisation stage. A private company erected a commercial bath irradiator for the radurisation of, especially, subtropical fruits. There are now three commercial irradiators involved in the radurisation of fresh and processed food products in South Africa. The outcome of the marketing trials and ensuing factors found to be most important in the commercialisation of radurisation are discussed

  13. Experiences with Farmer Participatory Cowpea Improvement and Seed Production

    International Nuclear Information System (INIS)

    Singh, B. B.

    2000-10-01

    Farmer participatory research is not only a significant concept today but it has become an essential approach to certain aspects of contemporary agricultural research. The CGIAR has already launched a system wide program on participatory research to assess the effectiveness of this approach in plant breeding, natural resources management and gender analysis. The need for participatory research arose when some of the superior technologies identified based on the tests at experiment stations failed to gain acceptance/popularity with resource poor farmers. In most cases, there was nothing wrong with the technologies but farmers did not have access to the recommended inputs and without inputs, the new technologies were poorer, equal to or marginally better than what farmers were using. The apparent lacuna was the lack of testing of new technologies in divers conditions including marginal environments without inputs to ensure superior performance under all conditions. Since all possible test conditions cannot be created at the experiment station, it is now generally agreed that farmer participation at strategic stages may be helpful in developing improved technologies intended for resource poor conditions and traditional cropping systems. The farmer participation ensures use of indigenous knowledge, farmer's perception about the acceptable plant types, seed types and use patterns. It also permits testing of selected materials in diverse conditions and farmer to farmer diffusion of improved technologies

  14. COMEDIE BD1 experiment: Fission product behaviour during depressurization transients

    International Nuclear Information System (INIS)

    Gillet, R.; Brenet, D.; Hanson, D.L.; Kimball, O.F.

    1996-01-01

    An experimental program in the CEA COMEDIE loop has been carried out to obtain integral test data to validate the methods and transport models used to predict fission product release from the core and plate-out in the primary coolant circuit of the Modular High Temperature Gas Cooled Reactor (MHTGR) during normal operation and liftoff, and during rapid depressurization transients. The loop consists of an in-pile section with the fuel element, deposition section (heat exchanger), filters for collecting condensible Fission Productions (FP) during depressurization tests and an out-of-pile section devoted to chemical composition control of the gas and on-line analysis of gaseous FP. After steady state irradiation, the loop was subjected to a series of in-situ blowdowns at shear ratios (ratio of the wall shear stress during blowdown to that during steady state operation) ranging from 0.7 to 5.6. The results regarding the FP profiles on the plate-out section, before and after blowdowns are given. It appears that: the plate-out profiles depend on the FP chemistry; the depressurization phases have led to significant desorption of I 131, but on the contrary, they have almost no effect for the other FP such as Ag 110m, Cs 134, Cs 137 and Te 132. (author). 1 ref., 15 figs

  15. Search for single top production through FCNC at ATLAS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Alhroob, Muhammad; Brock, Ian [Universitaet Bonn, Bonn (Germany); Hirschbuehl, Dominic [Bergische Universitaet Wuppertal, Wuppertal (Germany)

    2011-07-01

    Flavour Changing Neutral Currents (FCNC) are strongly suppressed in the Standard Model due to the Glashow-Iliopoulos-Maiani (GIM) mechanism. Although absent at tree level, small FCNC contributions are expected at one-loop level, determined by the CKM mixing. For the top quark, within the framework of the Standard Model, the expected FCNC branching fractions to gauge bosons, e.g. t {yields}q+gluon, are predicted to be at the level of 10{sup -13}. There are, however, extensions of the SM, like supersymmetry (SUSY) and the 2-Higgs doublet model, which predict the presence of FCNC contributions already at tree level and significantly enhance the FCNC decay branching ratios compared to the Standard Model predictions. Our study concentrates on single top-quark production through FCNC, where the u(c) quark interacts with a gluon to produce a single top quark without any associated production. The top quark then decays as usual via the SM process, t {yields}W+b. An upper limit on the couplings {kappa}{sub ugt} and {kappa}{sub cgt} have been extracted from the first ATLAS data taken in 2010.

  16. Achieving energy efficiency through product policy: the UK experience

    International Nuclear Information System (INIS)

    Boardman, Brenda

    2004-01-01

    The focus of this paper is on energy efficiency of domestic equipment. It is contended that, in the UK and--by extension--elsewhere. Government has to take the lead in defining low-energy standards for products. In the absence of policy, manufacturers do not recognize the need for carbon reductions in the equipment they design and consumers are unaware of the variation in energy performance in the product range. At present, neither market pull nor technology push can be relied upon to deliver energy savings. The imposition of a weak minimum standard on domestic fridges and freezers in 1999 will, over the lifetime of the appliances already sold by December 2002, save 1 Mt C of carbon dioxide at nil cost to government or to the manufacturers, and a net benefit to consumers of pound 855 m: a highly cost-effective policy. The difference between energy efficiency and energy conservation is that it takes time for the cumulative benefits of an energy efficiency improvement to result in the maximum effect on energy demand reduction: the benefits of the 1999 energy efficiency standard will accumulate until at least 2020. This period is equivalent to the cycle of stock replacement for that particular object. The final level of energy conservation depends upon the offsetting effects of growth in ownership levels and the size of new equipment purchases

  17. Production of analysis code for 'JOYO' dosimetry experiment

    International Nuclear Information System (INIS)

    Sasaki, Makoto; Nakazawa, Masaharu.

    1981-01-01

    As part of the measurement and analysis plan for the Dosimetry Experiment at the ''JOYO'' experimental fast reactor, neutron flux spectra analysis is performed using the NEUPAC (Neutron Unfolding Code Package) computer program. The code calculates the neutron flux spectra and other integral quantities from the activation data of the dosimeter foils. The NEUPAC code is based on the J1-type unfolding method, and the estimated neutron flux spectra is obtained as its solution. The program is able to determine the integral quantities and their sensitivities, together with an error estimate of the unfolded spectra and integral quantities. The code also performs a chi-square test of the input/output data, and contains many options for the calculational routines. This report presents the analytic theory, the program algorithms, and a description of the functions and use of the NEUPAC code. (author)

  18. Production of quartz plates for CMS-CASTOR Experiment

    CERN Document Server

    Adiguzel, Aytul; Ayhan, Aydin; Bakirci, Mustafa Numan; Basegmez, Suzan; Beaumont, Willem; Borras, Kerstin; Campbell, Alan; De Paula Carvalho, W; Çerçi, Salim; De Jesus Damiao, Dilson; Dogangün, O; Dumanoglu, Isa; d'Enterria, David; Erchov, Y; Eskut, Eda; Figueiredo, D; Girgis, Semiray; Göttlicher, P; Gouskos, Loukas; Gurpinar, Emine; Hos, Ilknur; Katkov, Igor; Katsas, Panagiotis; Khein, Lev; Knutsson, Albert; Kuznetsov, Andrey; Lebeau, Michel; Van Mechelen, Pierre; Muhl, Carsten; Musienko, Yuri; Ochesanu, Silvia; Onengüt, G; Onengut, G Jr; Ozdemir, Kadri; Panagiotou, Apostolos; Polatoz, A; Ripert, Marion; Shileev, K; Sogut, Kenan; Tiflov, B TaliV; Kayis-Topaksu, A; Uzun, Dilber

    2008-01-01

    Light transmission rate performance of $102$ irradiated quartz samples was measured to select the best quartz plates for CMS-CASTOR calorimeter. All the produced quartz plates were originally used in a previous CERN experiment, DELPHI. Three different doses of $^{60}$Co source were used with the collaboration of PSI (Paul Scherrer Institute, Villigen PSI, Switzerland.) to study the transmission rate performance of the quartz samples after irradiation for different incident light, ranging from $250$ to $700$ nm in $5$ nm increasing steps. All samples show different decrease in the rate with wavelength for different doses. Three different steps were followed before irradiation to find out the best way of cleaning the original DELPHI Cu/Cr tracks on the samples. Results of these measurements presented here correspond to the quartz plates that will be used in one hadronic sector of CASTOR calorimeter until end of 2008. For the full calorimeter new quartz plates will be installed. We also present the light transmi...

  19. Plutonium-enriched thermal fuel production experience in Belgium

    International Nuclear Information System (INIS)

    LeBlanc, J.M.

    1983-01-01

    Taking into account the strategic aspects of nuclear energy such as availability and sufficiency of resources and independence of energy supply, most countries planning to use plutonium look mainly to its use in fast reactors. However, by recycling the recovered uranium and plutonium in light water reactors, the saving of the uranium that would otherwise be required could already be higher than 35%. Therefore, until fast reactors are introduced, for macro- or microeconomic reasons, the plutonium recycle option seems to be quite valuable for countries having the plutonium technology. In Belgium, Belgonucleaire has been developing the plutonium technology for more than 20 yr and has operated a mixed oxide fuel fabrication plant since 1973. The past ten years of plant operation have provided for many improvements and relevant new documented experiences establishing a basis for new modifications that will be beneficial to the intrinsic quality, overall safety, and economy of the fuel

  20. Developments on positron scattering experiments including beam production and detection

    International Nuclear Information System (INIS)

    Selim, F.A.; Golovchenko, J.A.

    2001-01-01

    Positron scattering and channeling experiments require high quality (low emittance) beams. A new electrostatic optics system for extracting positrons from a moderator is presented. The system features improved efficiency of focusing and beam transport of moderated positrons emitted with angular spreads up to ± 30 , with good phase space characteristics. The presented optics also provides a high degree of freedom in controlling exit beam trajectories. The system has been installed in the LLNL Pelletron accelerator and showed great enhancement on the beam quality. On the detection side, image plates were used to measure the angular distributions of positrons transmitted through the gold crystals. The measurements demonstrate the advantages of image plates as quantitative position sensitive detectors for positrons. (orig.)

  1. η production on nucleon and nuclei: report on pinot experiment

    International Nuclear Information System (INIS)

    Chiavassa, E.; Dellacasa, G.; Marco, N. de; Oliveira Martin, C. de; Gallio, M.; Guaita, P.; Musso, A.; Piccotti, A.; Scomparin, E.; Vercellin, E.; Wilkin, C.

    1996-01-01

    An extensive experimental program with the aim of studying η production in p- N and p- nucleus collisions near threshold (T p = 1.26 GeV) has been recently carried out at SATURNE. The η- mesons were detected via the η → γγ decay by the two-arm PINOT spectrometer. The results concerning the pp → ppη reaction in the incident energy region 1.265 GeV ≤ GeV ≤ T p ≤ 2 GeV are presented here, as well as A-dependence. T η -dependence, T p -dependence of pA → ηX doubly differential cross sections. (author)

  2. Danish experience with the EDIP tool for environmental design of industrial products

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Alting, Leo

    1999-01-01

    Since its publication in, 1996, the Danish method and tools for the environmental design of industrial products (EDIP) have been used in companies in Denmark and abroad, and experience has been gained with a variety of product categories such as electronics, electromechanical products, furniture......, foodstuffs, packaging, textiles, building equipment, energy systems and railway systems. The experience shows that large environmental improvement potentials can be found in all product categories. As a broad average, 30-50% environmental improvement of products have been implemented over few years...... by companies working with the EDIP tools. The paper presents examples from pumps, refrigerator, high pressure cleaners audio/video products, book shelves and moulded cardboards. A questionnaire investigation of the experience with life cycle assessment (LCA) and ecodesign within the Danish pioneer companies...

  3. CDF experience with monte carlo production using LCG grid

    International Nuclear Information System (INIS)

    Griso, S P; Lucchesi, D; Compostella, G; Sfiligoi, I; Cesini, D

    2008-01-01

    The upgrades of the Tevatron collider and CDF detector have considerably increased the demand on computing resources, in particular for Monte Carlo production. This has forced the collaboration to move beyond the usage of dedicated resources and start exploiting the Grid. The CDF Analysis Farm (CAF) model has been reimplemented into LcgCAF in order to access Grid resources by using the LCG/EGEE middleware. Many sites in Italy and in Europe are accessed through this portal by CDF users mainly to produce Monte Carlo data but also for other analysis jobs. We review here the setup used to submit jobs to Grid sites and retrieve the output, including CDF-specific configuration of some Grid components. We also describe the batch and interactive monitor tools developed to allow users to verify the jobs status during their lifetime in the Grid environment. Finally we analyze the efficiency and typical failure modes of the current Grid infrastructure reporting the performances of different parts of the system used

  4. Experiences of a grid connected solar array energy production

    Science.gov (United States)

    Hagymássy, Zoltán; Vántus, András

    2015-04-01

    Solar energy possibilities of Hungary are higher than in Central Europe generally. The Institute for Land Utilisation, Technology and Regional Development of the University of Debrecen installed a photovoltaic (PV) system. The PV system is structured into 3 subsystems (fields). The first subsystem has 24 pieces of Kyocera KC 120 W type modules, the second subsystem has 72 pieces of Siemens ST 40W, and the remaining has 72 pieces of Dunasolar DS 40W In order to be operable independently of each other three inverter modules (SB 2500) had been installed. The recorder can be connected directly to a desktop PC. Operating and meteorological dates are recorded by MS Excel every 15 minutes. The power plant is connected to a weather station, which contents a PT 100 type temperature and humidity combined measuring instrument, a CM 11 pyranometer, and a wind speed measuring instrument. The produced DC, and AC power, together with the produced energy are as well, and the efficiency can be determined for each used PV technology. The measured operating and meteorological dates are collected by Sunny Boy Control, produced by the SMA. The energy productions of the subsystems are measured continually and the subsystems are measured separately. As an expected, the produced energy of polycrystalline -Si PV module and monocrystalline -Si PV was higher than amorphous-Si PV module. It is well known that energy analysis is more suitable for energy balance when we design a system. The air temperature and the temperature of the panels and the global irradiation conditions were measured. In summertime the panel temperature reaches 60-80 degrees in a sunny day. The panel temperatures are in a spring sunny day approximately 30-40 degrees. It can be concluded that the global irradiation is a major impact feature to influence the amount of energy produced. The efficiency depends on several parameters (spectral distribution of the incoming light, temperature values, etc.). The energy efficiency

  5. Undulator based scanning microscope at the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    Rarback, H.; Shu, D.; Ade, H.; Jacobsen, C.; Kirz, J.; McNulty, I.; Rosser, R.

    1986-01-01

    A second generation scanning soft x-ray microscope is under construction, designed to utilize the dramatic increase in source bightness available at the soft x-ray undulator. The new instrument is expected to reduce image acquisition time by a factor of about 100, and to improve resolution, stability, and reproducibility

  6. Laboratory facility for production of cryogenic targets for hot plasma experiments

    International Nuclear Information System (INIS)

    Sadowski, M.; Szydlowski, A.; Jakubowski, L.; Cwiek, E.

    1990-10-01

    Results of preliminary operational tests of the cryogenic stand designed for the production of small droplets of liquid hydrogen or deuterium are presented. Such cryogenic micro-targets are needed for nuclear and thermonuclear experiments. (author)

  7. Evaluating Telepresence Experience and Game Players' Intention to Purchase Product Advertised in Advergame

    OpenAIRE

    Zuhal Hussein; Nabsiah Abdul Wahid; Norizan Saad

    2010-01-01

    In line with changes of consumers modern lifestyle has call for the advertising strategy to change. This research is to find out how game with telepresence and product experience embedded in the computer game to affect users- intention to purchase. Game content developers are urging to consider of placing product message as part of game design strategy that can influence the game player-s intention to purchase. Experiment was carried out on two hundred and fifty undergraduate students who vol...

  8. Characterization of erosion dust and tritiated products inside the jet vessel after the first tritium experiment

    International Nuclear Information System (INIS)

    Charuau, J.; Belot, Y.; Cetier, P.; Drezet, L.; Grivaud, L.

    1992-01-01

    An experiment was carried out to characterize the erosion products found in the JET vessel after the first tritium experiment. These products were analyzed for carbon, beryllium, Inconel metals and tritium. All these elements were present in airborne particles or deposited dust. The tritium was found as tritiated water vapour, and also strongly associated to the suspended or deposited particles. It was more abundant in fine than in coarse particles. The particulate tritium seems to be almost entirely 'insoluble' in a water solution

  9. Chemical safety of cassava products in regions adopting cassava production and processing - experience from Southern Africa

    DEFF Research Database (Denmark)

    Nyirenda, D.B.; Chiwona-Karltun, L.; Chitundu, M.

    2011-01-01

    and perceptions concerning cassava and chemical food safety. Chips, mixed biscuits and flour, procured from households and markets in three regions of Zambia (Luapula-North, Western and Southern) as well as products from the Northern, Central and Southern regions of Malawi, were analyzed for total cyanogenic...... of products commercially available on the market. Risk assessments disclose that effects harmful to the developing central nervous system (CNS) may be observed at a lower exposure than previously anticipated. We interviewed farmers in Zambia and Malawi about their cultivars, processing procedures......The cassava belt area in Southern Africa is experiencing an unforeseen surge in cassava production, processing and consumption. Little documentation exists on the effects of this surge on processing procedures, the prevailing levels of cyanogenic glucosides of products consumed and the levels...

  10. Optimized collection, storage and measurement of radon and radon decay products - school experiments

    International Nuclear Information System (INIS)

    Philipsborn, H. von; Geipel, R.; Just, G.

    1998-01-01

    Schools are expected more than ever to teach in physics and chemistry an understanding of radioactivity in its many aspects. Simple experiments on the occurrence, the measurement and the properties of radionuclides are necessary for true understanding. Such experiments are now possible with novel methods of collection and storage of ubiquitous radon and radon decay products from air, water and solids. (orig.) [de

  11. Dissociative Experiences, Creative Imagination, and Artistic Production in Students of Fine Arts

    Science.gov (United States)

    Perez-Fabello, Maria Jose; Campos, Alfredo

    2011-01-01

    The current research was designed to assess the influence of dissociative experiences and creative imagination on the artistic production of Fine Arts students of the University of Vigo (Spain). The sample consisted of 81 students who were administered the Creative Imagination Scale and The Dissociative Experiences Scale. To measure artistic…

  12. Present it like it is here: Creating local presence to improve online product experiences

    NARCIS (Netherlands)

    Verhagen, Tibert; Vonkeman, Charlotte; Feldberg, Frans; Verhagen, Pleunes Willem

    2014-01-01

    Advanced online product presentation technologies such as virtual mirrors enable consumers to experience products like they are actually present with them in the real world. This study is one of the first to address the mechanism underlying this phenomenon. Inspired by literature on media technology

  13. Some Danish experience with product-service systems and their potentials and barriers to sustainable development

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2003-01-01

    This paper is one of the first attempts to scan the Danish experience with product-service systems and analyse the experiences with respect to potentials and barriers to sustainable development, i.e. reduced resource consumption and reduced environmental impact. The scan shows a variety of product-service-systems......: some have been around for many years and have not be set up for sustainability purposes, while others are rather new and are attempts to contribute to a more sustainable development. Some of the systems identified are so to say born as product-service-systems (like food catering), while others have...... been developed from being a product system into being a product-service-systems in order to support the marketing of more environmental friendly products....

  14. Brands as Product Coordinators: Matching Brands Make Joint Consumption Experiences More Enjoyable

    OpenAIRE

    Ryan Rahinel; Joseph P. Redden

    2013-01-01

    People often consume multiple products at the same time (e.g., chips and salsa). Four studies demonstrate that people enjoy such joint consumption experiences more when the products are merely labeled with the same brand (vs. different brands). Process evidence shows that this brand matching effect arises because matching brand labels cue consumers' belief that the two products were coordinated through joint testing and design to go uniquely well together. This shows that there is no universa...

  15. Products search through the use of semantic properties - report from the experiment at Kunstindustrimuseet

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Boelskifte, Per

    2005-01-01

    communication with regard to the semantic messages that products contain in the form of non-verbal expressions (i.e., through their shape and colour). 12 participants in groups of 2 selected exhibited products and described them verbally. Based on the verbal description, other teams were then asked to identify......In April 2004 an experiment was carried out at The Technical University of Denmark and at the Danish Arts and Craft Museum. The purpose was to explore how precise verbal communication could capture the semantic content of physical products. The experiment explored the possibilities of verbal...

  16. Linking product design to consumer behavior: the moderating role of consumption experience

    Directory of Open Access Journals (Sweden)

    Gilal NG

    2018-05-01

    Full Text Available Naeem Gul Gilal,1 Jing Zhang,1 Faheem Gul Gilal2 1School of Management, Huazhong University of Science and Technology, Wuhan, China; 2Donlinks School of Economics and Management, University of Science and Technology, Beijing, China Background: Previous investigations of product design broadly link aesthetic, functional, and symbolic designs to sales growth, high turnover, and market share. However, the effect of product design dimensions on consumer willingness-to-buy (WTB and word-of-mouth (WOM is virtually ignored by consumer researchers. Similarly, whether the consumption experience can differentiate the effect of the three product design dimensions on WTB and WOM is completely unknown. Using categorization theory as a lens, our study aims to explore the effect of product design dimensions on consumer WTB and WOM directly and indirectly through the moderation of the consumption experience.Methods: A convenience sample of (n=357 Chinese and (n=277 Korean shoppers was utilized to test the hypotheses in the fashion apparel industry.Results: Our results showed that the aesthetic design was more prominent in capturing consumer WTB for both Chinese and Koreans. Similarly, the aesthetic design was more salient in enhancing WOM for Chinese, whereas the symbolic design was more promising in terms of improving WOM for Koreans. Further, our moderation results demonstrated that the consumption experience could differentiate the effects of the three product design dimensions on consumer WTB and WOM for Chinese. By contrast, the consumption experience could only interact with the aesthetic design to improve WOM for South Koreans.Conclusion: To the best of authors’ knowledge, the present study is one of the initial attempts to link three product design dimensions with consumer WTB and WOM in the fashion apparel context and explored whether consumption experience competes or complement with three product design dimensions to shape consumer WTB and WOM for

  17. Cultural Aspects when Implementing Lean Production and Lean Product Development – Experiences from a Swedish Perspective

    Directory of Open Access Journals (Sweden)

    Promporn Wangwacharakul

    2014-07-01

    Full Text Available Lean principles and methods, originating in a Japanese cultural context, have spread to a large number of companies throughout the world. The aim of this case study research is to identify and compare national cultural aspects that influence Lean Production and Lean Product Development implementation in Swedish companies. Data were collected through questionnaires, interviews and an industrial workshop with Swedish Lean practitioners. The study shows that some sub-areas in Lean, such as value definition, control systems, leadership, team development, knowledge management, and strategies, are highly dependent on contextual factors related to human, cultural and organizational aspects. These are related to the national culture and should be considered to a higher extent for successful sustainable implementation of Lean in different cultural contexts. As for implementing Lean in Sweden, national cultural characteristics, such as individualism, autonomy and supportive management style fit well with Lean thinking.

  18. Photochemical ozone production in tropical squall line convection during NASA Global Tropospheric Experiment/Amazon Boundary Layer Experiment 2A

    Science.gov (United States)

    Pickering, Kenneth E.; Thompson, Anne M.; Tao, Wei-Kuo; Simpson, Joanne; Scala, John R.

    1991-01-01

    The role of convection was examined in trace gas transport and ozone production in a tropical dry season squall line sampled on August 3, 1985, during NASA Global Tropospheric Experiment/Amazon Boundary Layer Experiment 2A (NASA GTE/ABLE 2A) in Amazonia, Brazil. Two types of analyses were performed. Transient effects within the cloud are examined with a combination of two-dimensional cloud and one-dimensional photochemical modeling. Tracer analyses using the cloud model wind fields yield a series of cross sections of NO(x), CO, and O3 distribution during the lifetime of the cloud; these fields are used in the photochemical model to compute the net rate of O3 production. At noon, when the cloud was mature, the instantaneous ozone production potential in the cloud is between 50 and 60 percent less than in no-cloud conditions due to reduced photolysis and cloud scavenging of radicals. Analysis of cloud inflows and outflows is used to differentiate between air that is undisturbed and air that has been modified by the storm. These profiles are used in the photochemical model to examine the aftereffects of convective redistribution in the 24-hour period following the storm. Total tropospheric column O3 production changed little due to convection because so little NO(x) was available in the lower troposphere. However, the integrated O3 production potential in the 5- to 13-km layer changed from net destruction to net production as a result of the convection. The conditions of the August 3, 1985, event may be typical of the early part of the dry season in Amazonia, when only minimal amounts of pollution from biomass burning have been transported into the region.

  19. Simulation of COMEDIE Fission Product Plateout Experiment Using GAMMA-FP

    International Nuclear Information System (INIS)

    Tak, Nam-il; Yoon, Churl

    2014-01-01

    FThis phenomenon is particularly important under a VHTR design with vented low pressure confinement (VLPC), because the vent allows the prompt release of fission products accumulated within the primary circuit to environment during an initial blow-down phase after pipe break accidents. In order to analyze the fission product plateout, an numerical model was developed by Yoo et al. and incorporated into the GAMMA-FP code in the past. The GAMMA-FP model was validated against two experiment data, i.e., VAMPYR-1 and OGL, during the development phase. One of the well-known experiments for fission product plateout is the COMEDIE experiment. In this work, the COMEDIE experiment has been simulated using the GAMMA-FP code to investigate the reliability and applicability of the plateout model of GAMMA-FP. The COMEDIE experiment for fission product plateout was simulated using the GAMMA-FP code in this work. A good agreement was achieved between the measured and predicted plateout activities. The existing solution scheme was modified to allow larger time step size for fission product analysis in order to speed-up the computational time. Nevertheless, the modification of the existing numerical model of GAMMA-FP is necessary when a simulation capability of a long duration of plateout period (e.g., 60 years) is targeted

  20. Linking product design to consumer behavior: the moderating role of consumption experience.

    Science.gov (United States)

    Gilal, Naeem Gul; Zhang, Jing; Gilal, Faheem Gul

    2018-01-01

    Previous investigations of product design broadly link aesthetic, functional, and symbolic designs to sales growth, high turnover, and market share. However, the effect of product design dimensions on consumer willingness-to-buy (WTB) and word-of-mouth (WOM) is virtually ignored by consumer researchers. Similarly, whether the consumption experience can differentiate the effect of the three product design dimensions on WTB and WOM is completely unknown. Using categorization theory as a lens, our study aims to explore the effect of product design dimensions on consumer WTB and WOM directly and indirectly through the moderation of the consumption experience. A convenience sample of (n=357) Chinese and (n=277) Korean shoppers was utilized to test the hypotheses in the fashion apparel industry. Our results showed that the aesthetic design was more prominent in capturing consumer WTB for both Chinese and Koreans. Similarly, the aesthetic design was more salient in enhancing WOM for Chinese, whereas the symbolic design was more promising in terms of improving WOM for Koreans. Further, our moderation results demonstrated that the consumption experience could differentiate the effects of the three product design dimensions on consumer WTB and WOM for Chinese. By contrast, the consumption experience could only interact with the aesthetic design to improve WOM for South Koreans. To the best of authors' knowledge, the present study is one of the initial attempts to link three product design dimensions with consumer WTB and WOM in the fashion apparel context and explored whether consumption experience competes or complement with three product design dimensions to shape consumer WTB and WOM for Chinese and Koreans.

  1. Willingness to pay for fair trade products: Results from a discrete choice experiment

    DEFF Research Database (Denmark)

    Peyer, Mathias; Balderjahn, Ingo; Scholderer, Joachim

    under the assumption that a fair trade label was included on the product package. It is concluded that fair trade certification may result yield real competitive advantage for producers of consumer goods, and that the generality of the observed effects should be investigated in other product categories...... awareness of fair trade labels and prior experience with fair trade products as individual-differences variables. Results indicated that consumer willingness to pay for fair trade labels was significant and positive under virtually all experimental conditions, and increased further when the fair trade label...... was combined with a strong manufacturer brand, when participants had prior experience with fair-trade products, and when participants had high prior awareness of fair trade labels. Based on the parameter estimates, price response functions were fitted, and changes in market shares were predicted for each brand...

  2. Particle production in high energy nucleus--nucleus experiments at Berkeley

    International Nuclear Information System (INIS)

    Schroeder, L.S.

    1976-09-01

    A review of high energy nucleus-nucleus experiments performed at the Berkeley Bevalac is presented. Earlier results on projectile and target fragmentation and pion production are briefly summarized. More recent results on Coulomb effects in projectile fragmentation, heavy ion total cross-sections, γ-ray production, and charged particle multiplicities are presented. Also, recent experiments which may shed light on phenomena arising from the central collision of two energetic nuclei, including recent evidence for and against the observation of nuclear shock waves, are reviewed

  3. EXPERIENCES INITIATING SOFTWARE PRODUCT LINE ENGINEERING IN SMALL TEAMS WITH PULSE

    DEFF Research Database (Denmark)

    Mærsk-Møller, Hans Martin; Jørgensen, Bo Nørregaard

    2010-01-01

    Small teams of software engineers are represented both in small companies and semi-independent fractions in medium and large companies. Even though some results and experience papers have been published in the context of Small- and Medium-Sized Enterprises (SMEs), there is a lack of experience pa...... an existing methodology, PuLSETM, drew advantages of NetBeans Rich Client Platform, and based the product line on the existing application....

  4. Experience with the gLite workload management system in ATLAS Monte Carlo production on LCG

    International Nuclear Information System (INIS)

    Campana, S; Sciaba, A; Rebatto, D

    2008-01-01

    The ATLAS experiment has been running continuous simulated events production since more than two years. A considerable fraction of the jobs is daily submitted and handled via the gLite Workload Management System, which overcomes several limitations of the previous LCG Resource Broker. The gLite WMS has been tested very intensively for the LHC experiments use cases for more than six months, both in terms of performance and reliability. The tests were carried out by the LCG Experiment Integration Support team (in close contact with the experiments) together with the EGEE integration and certification team and the gLite middleware developers. A pragmatic iterative and interactive approach allowed a very quick rollout of fixes and their rapid deployment, together with new functionalities, for the ATLAS production activities. The same approach is being adopted for other middleware components like the gLite and CREAM Computing Elements. In this contribution we will summarize the learning from the gLite WMS testing activity, pointing out the most important achievements and the open issues. In addition, we will present the current situation of the ATLAS simulated event production activity on the EGEE infrastructure based on the gLite WMS, showing the main improvements and benefits from the new middleware. Finally, the gLite WMS is being used by many other VOs, including the LHC experiments. In particular, some statistics will be shown on the CMS experience running WMS user analysis via the WMS

  5. The Role of Experience When Utilizing Inter-organizational Relationships for New Product Development

    DEFF Research Database (Denmark)

    Mortensen, Thomas Bøtker; Knudsen, Mette Præst

    The purpose of this paper is to investigate the role of collaborative experience on interorganizational collaborations in the new product development (NPD) process, and whether collaborative experience can act as a mediating and moderating variable. The paper is motivated by the growing literature...... on the importance of inter-organizational relationships stimulated by the idea that firms operate in networks and should therefore be strategic about who to include in e.g. NPD projects. A growing literature has concluded that trust and experience are vital tacit skills to build, which may be crucial...... in establishing successful relationships. However, the empirical evidence reported in the literature is still relatively scarce....

  6. Measurements of very forward particles production spectra at LHC: the LHCf experiment

    CERN Document Server

    Berti, Eugenio; Bonechi, Lorenzo; Bongi, Massimo; Castellini, Guido; D'Alessandro, Raffaello; Haguenauer, Maurice; Itow, Yoshitaka; Iwata, Taiki; Kasahara, Katsuaki; Makino, Yuya; Masuda, Kimiaki; Matsubayashi, Eri; Menjo, Hiroaki; Muraki, Yasushi; Papini, Paolo; Ricciarini, Sergio; Sako, Takashi; Suzuki, Takuya; Tamura, Tadahisa; Tiberio, Alessio; Torii, Shoji; Tricomi, Alessia; Turner, W C; Ueno, Mana; Zhou, Qi Dong

    2017-01-01

    Thanks to two small sampling calorimeters installed in the LHC tunnel at ±140 m from IP1, the LHC forward (LHCf) experiment is able to detect neutral particles produced by high energy proton-ion collisions in the very forward region (pseudo-rapidity η > 8.4). The main aim of LHCf is to provide precise measurements of the production spectra relative to these particles, in order to tune hadronic interaction models used by ground-based cosmic rays experiments. In this paper we will present the current status of the LHCf experiment, regarding in particular collected data and analysis results, as well as future prospects

  7. The exact probability distribution of the rank product statistics for replicated experiments.

    Science.gov (United States)

    Eisinga, Rob; Breitling, Rainer; Heskes, Tom

    2013-03-18

    The rank product method is a widely accepted technique for detecting differentially regulated genes in replicated microarray experiments. To approximate the sampling distribution of the rank product statistic, the original publication proposed a permutation approach, whereas recently an alternative approximation based on the continuous gamma distribution was suggested. However, both approximations are imperfect for estimating small tail probabilities. In this paper we relate the rank product statistic to number theory and provide a derivation of its exact probability distribution and the true tail probabilities. Copyright © 2013 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

  8. RHIC forward experiment to study √s dependence of forward particle production

    Directory of Open Access Journals (Sweden)

    Sako T.

    2017-01-01

    Full Text Available The Relativistic Heavy Ion Collider forward experiment is ready to take data in the RHIC Run2017 √s = 510 GeV p-p collisions using the LHCf Arm1 detector. New accelerator data are valuable to verify the Feynman scaling of FX1 production and to study the evolution of the break of scaling in neutron production. Using the transversely polarized proton beam, asymmetric production of forward neutrons is precisely measured. That is useful to understand the fundamental meson exchange in the proton-proton collisions.

  9. Chinese green product standards: international experience and pathway for a unified system

    Science.gov (United States)

    Yun, Fu; Ling, Lin; Dongfeng, Gao; Shuo, Yang

    2017-11-01

    The establishment of a unified green product standard system is of great importance regarding the effective supply of green products and meeting trend of the consumption upgrade. It also is helpful to reduce the cost of green information disclosure of enterprises, and facilitate the supply-side structural reform. Based on the experience of developing and implementing green product standards in the EU, Germany, America, Japan and so on, combined with current Chinese standard systems including environmental protection, energy conservation, water conservation, low carbon, recycling, regeneration and organic, with the adoption of the life cycle thinking, this paper brings forward basic requirements on organizations including pollutant emissions, establishment of management system, energy conservation and emission reduction technology and green supply chain management, and proposes indicator requirements on product including resource attributes, energy attributes, environmental attributes and quality attributes, so as to guide the establishment of green product evaluation standards in the context of China.

  10. A Measurement of Coherent Neutral Pion Production in Neutrino Neutral Current Interactions in NOMAD experiment

    CERN Document Server

    Kullenberg, C T

    2009-01-01

    We present a study of exclusive neutral pion production in neutrino-nucleus Neutral Current interactions using data from the NOMAD experiment at the CERN SPS. The data correspond to $1.44 \\times 10^6$ muon-neutrino Charged Current interactions in the energy range $2.5 \\leq E_{\

  11. The Harley effect : Internal and external factors that facilitate positive experiences with product sounds

    NARCIS (Netherlands)

    Ozcan Vieira, E.

    2014-01-01

    Everyday activities are laden with emotional experiences involving sound. Our interactions with products (shavers, hairdryers, electric drills) often cause sounds that are typically unpleasant to the ear. Yet, we may get excited with the sound of an accelerating Harley Davidson because the rumbling

  12. Calculating Program for Decommissioning Work Productivity based on Decommissioning Activity Experience Data

    Energy Technology Data Exchange (ETDEWEB)

    Song, Chan-Ho; Park, Seung-Kook; Park, Hee-Seong; Moon, Jei-kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    KAERI is performing research to calculate a coefficient for decommissioning work unit productivity to calculate the estimated time decommissioning work and estimated cost based on decommissioning activity experience data for KRR-2. KAERI used to calculate the decommissioning cost and manage decommissioning activity experience data through systems such as the decommissioning information management system (DECOMMIS), Decommissioning Facility Characterization DB System (DEFACS), decommissioning work-unit productivity calculation system (DEWOCS). In particular, KAERI used to based data for calculating the decommissioning cost with the form of a code work breakdown structure (WBS) based on decommissioning activity experience data for KRR-2.. Defined WBS code used to each system for calculate decommissioning cost. In this paper, we developed a program that can calculate the decommissioning cost using the decommissioning experience of KRR-2, UCP, and other countries through the mapping of a similar target facility between NPP and KRR-2. This paper is organized as follows. Chapter 2 discusses the decommissioning work productivity calculation method, and the mapping method of the decommissioning target facility will be described in the calculating program for decommissioning work productivity. At KAERI, research on various decommissioning methodologies of domestic NPPs will be conducted in the near future. In particular, It is difficult to determine the cost of decommissioning because such as NPP facility have the number of variables, such as the material of the target facility decommissioning, size, radiographic conditions exist.

  13. Temperature dependence of anti-hydrogen production in the ATHENA experiment

    CERN Document Server

    Bonomi, G; Amsler, Claude; Bouchta, A; Bowe, P; Carraro, C; Cesar, C L; Charlton, M; Doser, Michael; Filippini, V; Fontana, A; Fujiwara, M C; Funakoshi, R; Genova, P; Hangst, J S; Hayano, R S; Jørgensen, L V; Lagomarsino, V; Landua, Rolf; Lindelöf, D; Lodi-Rizzini, E; Macri, M; Madsen, N; Montagna, P; Pruys, H S; Regenfus, C; Riedler, P; Rotondi, A; Testera, G; Variola, A; Van der Werf, D P

    2004-01-01

    The ATHENA experiment recently produced the first sample of cold anti-hydrogen atoms by mixing cold plasmas of anti-protons and positrons. The temperature of the positron plasma was increased by controlled RF heating and the anti-hydrogen production rate was measured. Preliminary results are presented. (8 refs).

  14. Creating Socionas : Building creative understanding of people's experiences in the early stages of new product development

    NARCIS (Netherlands)

    Postma, C.E.

    2012-01-01

    This work presents the research into Creating Socionas, a step-by-step approach to building creative understanding of user experience in the early stages of new product development (NPD). Creative understanding is the combination of a rich, cognitive and affective understanding of the other, and the

  15. Shoes, Cars, and Other Love Stories : Investigating The Experience of Love for Products

    NARCIS (Netherlands)

    Russo, B.

    2010-01-01

    People often say they love a product. What do they really mean when they say this, and is this a phenomenon that is relevant to the field of design? Findings from a preliminary study in this thesis indicated that people describe their love as a rewarding, long-term, and dynamic experience that

  16. Calculating Program for Decommissioning Work Productivity based on Decommissioning Activity Experience Data

    International Nuclear Information System (INIS)

    Song, Chan-Ho; Park, Seung-Kook; Park, Hee-Seong; Moon, Jei-kwon

    2014-01-01

    KAERI is performing research to calculate a coefficient for decommissioning work unit productivity to calculate the estimated time decommissioning work and estimated cost based on decommissioning activity experience data for KRR-2. KAERI used to calculate the decommissioning cost and manage decommissioning activity experience data through systems such as the decommissioning information management system (DECOMMIS), Decommissioning Facility Characterization DB System (DEFACS), decommissioning work-unit productivity calculation system (DEWOCS). In particular, KAERI used to based data for calculating the decommissioning cost with the form of a code work breakdown structure (WBS) based on decommissioning activity experience data for KRR-2.. Defined WBS code used to each system for calculate decommissioning cost. In this paper, we developed a program that can calculate the decommissioning cost using the decommissioning experience of KRR-2, UCP, and other countries through the mapping of a similar target facility between NPP and KRR-2. This paper is organized as follows. Chapter 2 discusses the decommissioning work productivity calculation method, and the mapping method of the decommissioning target facility will be described in the calculating program for decommissioning work productivity. At KAERI, research on various decommissioning methodologies of domestic NPPs will be conducted in the near future. In particular, It is difficult to determine the cost of decommissioning because such as NPP facility have the number of variables, such as the material of the target facility decommissioning, size, radiographic conditions exist

  17. Five Years of Cyclotron Radioisotope Production Experiences at the First PET-CT in Venezuela

    International Nuclear Information System (INIS)

    Colmenter, L.; Coelho, D.; Esteves, L. M.; Ruiz, N.; Morales, L.; Lugo, I.; Sajo-Bohus, L.; Liendo, J. A.; Greaves, E. D.; Barros, H.; Castillo, J.

    2007-01-01

    Five years operation of a compact cyclotron installed at PET-CT facility in Caracas, Venezuela is given. Production rate of 18 F labeled FDG, operation and radiation monitoring experience are included. We conclude that 18 FDG CT-PET is the most effective technique for patient diagnosis

  18. CEM: Increasing productivity through the management and monitoring of experiences provided to customers

    Directory of Open Access Journals (Sweden)

    Adriana Arineli

    2015-12-01

    Full Text Available Dealing with intangible and so subtle experience is unusual and a huge challenge for management that is not used to measure what has no numbers, but maybe they need to see beyond the obvious and accessible statistics. Recently, several studies point to the importance of customer experience management (CEM. However, if the CEM is a strategy to focus on operations and processes of a business around the customers’ experiences with the company, it is essential to seek grants to structure it and find out its effectiveness. This study examines the issues involved in offering superior customer experiences on fashion retail stores in Brazil, identifying the relation between productivity and CEM. Through a research with managers of three important Brazilian clothing retail chains, it was possible to analyze the aspects that impact on the customer experience and their relevance. A questionnaire was applied to evaluate 23 variables that make up the experience of the customer and their impact on increasing productivity. Some statistical techniques were used for data processing and it was possible to realize that only 4 of the 23 items were not relevant for customer experience. It can be concluded that CEM is effective in increasing productivity and can be used as a guideline matrix management in decision-making to promote superior customer experiences. Specific characteristics of each segment suggest different impacts in every aspect. Therefore, it is crucial that each segment review its own variables that will structure the CEM. Even assuming that it is defiant see beyond the obvious, maybe this is the necessary opportunity to create real competitive advantage and longevity for companies that want to stand out and be successful over time.

  19. Understanding the reductions in US corn ethanol production costs: An experience curve approach

    International Nuclear Information System (INIS)

    Hettinga, W.G.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.J.; Hicks, K.B.

    2009-01-01

    The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by using the experience curve approach, scrutinizing costs of dry grind ethanol production over the timeframe 1980-2005. Cost reductions are differentiated between feedstock (corn) production and industrial (ethanol) processing. Corn production costs in the US have declined by 62% over 30 years, down to 100$ 2005 /tonne in 2005, while corn production volumes almost doubled since 1975. A progress ratio (PR) of 0.55 is calculated indicating a 45% cost decline over each doubling in cumulative production. Higher corn yields and increasing farm sizes are the most important drivers behind this cost decline. Industrial processing costs of ethanol have declined by 45% since 1983, to below 130$ 2005 /m 3 in 2005 (excluding costs for corn and capital), equivalent to a PR of 0.87. Total ethanol production costs (including capital and net corn costs) have declined approximately 60% from 800$ 2005 /m 3 in the early 1980s, to 300$ 2005 /m 3 in 2005. Higher ethanol yields, lower energy use and the replacement of beverage alcohol-based production technologies have mostly contributed to this substantial cost decline. In addition, the average size of dry grind ethanol plants increased by 235% since 1990. For the future it is estimated that solely due to technological learning, production costs of ethanol may decline 28-44%, though this excludes effects of the current rising corn and fossil fuel costs. It is also concluded that experience curves are a valuable tool to describe both past and potential future cost reductions in US corn-based ethanol production

  20. Ten ways to design for disgust, sadness, and other enjoyments : A design approach to enrich product experiences with negative emotions

    NARCIS (Netherlands)

    Fokkinga, S.F.; Desmet, P.M.A.

    2013-01-01

    This paper demonstrates how designers can enrich user experiences by purposefully involving negative emotions in user-product interaction. This approach is derived from a framework of rich experience, which explains how and under what circumstances negative emotions make a product experience richer

  1. Deuteron and anti-deuteron production in CERN experiment NA44

    International Nuclear Information System (INIS)

    Simon-Gillo, J.

    1995-01-01

    The abundances of light nuclei probe the later stages of the evolution of a system formed in a relativistic heavy-ion collision. After the system has cooled and expanded, nucleons in close proximity and moving with small relative momenta coalesce to form nuclei. Light nuclei production enables the study of several topics, including the mechanism of composite particle production, freeze-out temperature, size of the interaction region, and entropy of the system. NA44 is the only relativistic heavy-ion experiment to have both deuteron and anti-deuteron results in both pA and AA collisions and the first CERN experiment to study the physics topics addressed by d and bar d production

  2. Rate of germanium-isotope production by background processes in the SAGE experiment

    International Nuclear Information System (INIS)

    Gavrin, V.N.; Gorbachev, V.V.; Ibragimova, T.V.; Cleveland, B.T.

    2002-01-01

    Data on a direct determination of systematic uncertainties caused by the background production of germanium isotopes in the radiochemical SAGE experiment measuring the solar-neutrino flux are analyzed. The result obtained for the rate of 68 Ge production is 6.5(1±1.0) times greater than the expected one; the rate of 69 Ge production does not exceed preliminary estimates. The above result for 68 Ge corresponds to the systematic uncertainty that is caused by the interaction of cosmic-ray muons and which is equal to 5.8% (4.5 SNU) at a solar-neutrino-capture rate of 77.0 SNU. An experiment is proposed that would test the effect of cosmic-ray muon influence on the SAGE systematic uncertainty and which would be performed at the location of the underground scintillation telescope facilities of the Baksan Neutrino Observatory (Institute for Nuclear Research, Russian Academy of Sciences)

  3. Concepts and Plans towards fast large scale Monte Carlo production for the ATLAS Experiment

    CERN Document Server

    Chapman, J; Duehrssen, M; Elsing, M; Froidevaux, D; Harrington, R; Jansky, R; Langenberg, R; Mandrysch, R; Marshall, Z; Ritsch, E; Salzburger, A

    2014-01-01

    The huge success of the physics program of the ATLAS experiment at the Large Hadron Collider (LHC) during run I relies upon a great number of simulated Monte Carlo events. This Monte Carlo production takes the biggest part of the computing resources being in use by ATLAS as of now. In this document we describe the plans to overcome the computing resource limitations for large scale Monte Carlo production in the ATLAS Experiment for run II, and beyond. A number of fast detector simulation, digitization and reconstruction techniques and are being discussed, based upon a new flexible detector simulation framework. To optimally benefit from these developments, a redesigned ATLAS MC production chain is presented at the end of this document.

  4. Concepts and Plans towards fast large scale Monte Carlo production for the ATLAS Experiment

    Science.gov (United States)

    Ritsch, E.; Atlas Collaboration

    2014-06-01

    The huge success of the physics program of the ATLAS experiment at the Large Hadron Collider (LHC) during Run 1 relies upon a great number of simulated Monte Carlo events. This Monte Carlo production takes the biggest part of the computing resources being in use by ATLAS as of now. In this document we describe the plans to overcome the computing resource limitations for large scale Monte Carlo production in the ATLAS Experiment for Run 2, and beyond. A number of fast detector simulation, digitization and reconstruction techniques are being discussed, based upon a new flexible detector simulation framework. To optimally benefit from these developments, a redesigned ATLAS MC production chain is presented at the end of this document.

  5. Search for electroweak production of the top quark in the D diameter experiment; Recherche de la production electrofaible de quark top dans l'experience D diametre

    Energy Technology Data Exchange (ETDEWEB)

    Agelou, M

    2005-05-01

    This thesis deals with the search for a signal of the electroweak production of the top quark. This signal is made up of a high energy muon issued from the decay of a W, itself produced by a top quark. As the neutrino escapes from the detection system, some transverse energy is expected to be missing and at least 2 jets must be released with at least one jet of B. In the first chapter the author presents the standard model and reviews what physics can be made with an accelerator like the Tevatron. The second chapter presents the quest for the top quark and its discovery at the Tevatron in 1995. The third chapter is dedicated to the phenomenology of the electroweak production of the top. The chapter four presents the Tevatron and the different detectors involved in the D0 experiment. The chapter five is dedicated to the tools necessary to perform data analysis, it means to assess the corrections to apply to muon momentum, to simulated background events and to algorithms of B jet identification. The last chapter is dedicated to the search analysis of the top electroweak production in the muonic channel. 2 analysis are described: one using 158 pb{sup -1} of data and that is based on the presence of one muon in a jet to identify a B jet and the other one operating on 230 pb{sup -1} of data and that is based on a more efficient algorithm of B jet identification. This work allows us to propose a maximum value of 22.8 pb for the electroweak production cross-section of the top quark when s and t channels are combined. (A.C.)

  6. Analysis of ZPPR experiments supporting production of 60Co in FFTF

    International Nuclear Information System (INIS)

    Wootan, D.W.; Carter, L.L.; Rawlins, J.A.; Schaefer, R.W.; Maddison, D.W.

    1987-01-01

    An effort to expand the irradiation mission of the Fast Flux Test Facility (FFTF) beyond testing fuels and materials for the liquid-metal reactor (LMR) program included a study of the feasibility of producing commercial quantities of 60 Co. The 60 Co would be produced by neutron capture in assemblies containing an array of natural cobalt pins and hydrogen-bearing moderator pins located at the periphery of the FFTF core. Adding hydrogenous material to the assemblies enhances 60 Co production by slowing neutrons into energy ranges where the 59 Co capture cross section is higher. Some of the moderated neutrons leak from the moderated region to adjacent fuel regions, increasing local fission rates. In order to validate calculated fission rates and establish calculational biases and uncertainties, experiments were conducted in the zero-power plutonium reactor (ZPPR) to measure fission rates in fuel regions adjacent to a mock-up of a cobalt production assembly. The ZPPR experiment and analyses provided the technical basis for irradiating hydride-moderated assemblies in FFTF and a cobalt production cycle of FFTF with generally good agreement between measured and predicted reactivity worth and outlet temperatures in adjacent fuel assemblies. This experiment provides a benchmark configuration of a hydrogenous assembly in a fast reactor, with emphasis on the effect of the hydrogen on adjacent fuel. It is anticipated there will be other applications of hydride moderation in the development of future isotope production missions in FFTF

  7. X-ray production experiments on the RACE Compact Torus Accelerator

    International Nuclear Information System (INIS)

    Hammer, J.H.; Eddleman, J.L.; Hartman, C.W.; McLean, H.S.; Molvik, A.W.; Gee, M.

    1989-12-01

    The Purpose of the Compact Torus Accelerator (CTA) program at LLNL is to prove the principle of a unique accelerator concept based on magnetically confined compact torus (CT) plasma rings and to study applications. Successful achievement of these goals could lead to a high power-density driver for many applications including an intense x-ray source for nuclear weapons effects simulation and an inertial fusion driver. Fusion applications and a description of the CTA concept are included in a companion paper at this conference. This paper will describe the initial experiments on soft x-ray production conducted on the plasma Ring ACcelerator Experiment (RACE) and compare the results to modeling studies. The experiments on CT stagnation and soft x-ray production were conducted with unfocused rings as a first of CT dynamics and the physics of x-ray production. The x-ray fluences observed are consistent with expectations based on calculations employing a radiation-hydrodynamics code. We conclude with a diffusion of future x-ray production studies that can be conducted on RACE and a possible multi-megajoule upgrade

  8. Experience of BESIII data production with local cluster and distributed computing model

    International Nuclear Information System (INIS)

    Deng, Z Y; Li, W D; Liu, H M; Sun, Y Z; Zhang, X M; Lin, L; Nicholson, C; Zhemchugov, A

    2012-01-01

    The BES III detector is a new spectrometer which works on the upgraded high-luminosity collider, BEPCII. The BES III experiment studies physics in the tau-charm energy region from 2 GeV to 4.6 GeV . From 2009 to 2011, BEPCII has produced 106M ψ(2S) events, 225M J/ψ events, 2.8 fb −1 ψ(3770) data, and 500 pb −1 data at 4.01 GeV. All the data samples were processed successfully and many important physics results have been achieved based on these samples. Doing data production correctly and efficiently with limited CPU and storage resources is a big challenge. This paper will describe the implementation of the experiment-specific data production for BESIII in detail, including data calibration with event-level parallel computing model, data reconstruction, inclusive Monte Carlo generation, random trigger background mixing and multi-stream data skimming. Now, with the data sample increasing rapidly, there is a growing demand to move from solely using a local cluster to a more distributed computing model. A distributed computing environment is being set up and expected to go into production use in 2012. The experience of BESIII data production, both with a local cluster and with a distributed computing model, is presented here.

  9. Heterotrophic bacterial production and metabolic balance during the VAHINE mesocosm experiment in the New Caledonia lagoon

    Science.gov (United States)

    Van Wambeke, France; Pfreundt, Ulrike; Barani, Aude; Berthelot, Hugo; Moutin, Thierry; Rodier, Martine; Hess, Wolfgang R.; Bonnet, Sophie

    2016-06-01

    Studies investigating the fate of diazotrophs through the microbial food web are lacking, although N2 fixation can fuel up to 50 % of new production in some oligotrophic oceans. In particular, the role played by heterotrophic prokaryotes in this transfer is largely unknown. In the frame of the VAHINE (VAriability of vertical and tropHIc transfer of diazotroph derived N in the south wEst Pacific) experiment, three replicate large-volume (˜ 50 m3) mesocosms were deployed for 23 days in the new Caledonia lagoon and were intentionally fertilized on day 4 with dissolved inorganic phosphorus (DIP) to stimulate N2 fixation. We specifically examined relationships between heterotrophic bacterial production (BP) and N2 fixation or primary production, determined bacterial growth efficiency and established carbon budgets. BP was statistically higher during the second phase of the experiment (P2: days 15-23), when chlorophyll biomass started to increase compared to the first phase (P1: days 5-14). Phosphatase alkaline activity increased drastically during the second phase of the experiment, showing adaptations of microbial populations after utilization of the added DIP. Notably, among autotrophs, Synechococcus abundances increased during P2, possibly related to its capacity to assimilate leucine and to produce alkaline phosphatase. Bacterial growth efficiency based on the carbon budget (27-43 %), was notably higher than generally cited for oligotrophic environments and discussed in links with the presence of abundant species of bacteria expressing proteorhodopsin. The main fates of gross primary production (particulate + dissolved) were respiration (67 %) and export through sedimentation (17 %). BP was highly correlated with particulate primary production and chlorophyll biomass during both phases of the experiment but was slightly correlated, and only during P2 phase, with N2 fixation rates. Heterotrophic bacterial production was strongly stimulated after mineral N enrichment

  10. Neutral strange particle production at top SPS energy measured by the CERES experiment

    International Nuclear Information System (INIS)

    Radomski, S.

    2006-01-01

    Systematics of strange particle production in collisions of ultrarelativistic nuclei provides an insight into the properties of the strongly interacting matter. Hadrochemistry, the study of the relative yields, provides information about chemical freeze-out and the position of the system in the phase diagram. Strangeness production at Super Proton Synchrotron (SPS) energies is not fully explained by the thermal model of hadron gas. Data reported by one experiment show sharp structures as a function of energy which are interpreted as a signature for a phase transition, but due to discrepancies in the results between two different experiments, a conclusion can not be drawn. This thesis is part of an effort to build a database of the strangeness production at SPS energy. The particular subject of this work is a precise measurement of the production of K S 0 . The results are compared with two other experiments and the prediction of the thermal model. The high precision data shed light on the systematics of strangeness production and allow clarification of the experimental status. The study of transverse momentum spectra provides information about the temperature and the radial expansion of the system. Here, as in the case of particle yields, interesting structures are visible as a function of energy. A rapid increase in the number of degrees of freedom is visible in the SPS region. A large part of the strangeness is carried by the neutral strange baryon Λ. Here the experimental situation is even more complicated because the reconstruction of the Λ yield requires large extrapolation to low transverse momentum. In this work first results on Λ production will be presented. (orig.)

  11. Neutral strange particle production at top SPS energy measured by the CERES experiment

    Energy Technology Data Exchange (ETDEWEB)

    Radomski, S.

    2006-07-05

    Systematics of strange particle production in collisions of ultrarelativistic nuclei provides an insight into the properties of the strongly interacting matter. Hadrochemistry, the study of the relative yields, provides information about chemical freeze-out and the position of the system in the phase diagram. Strangeness production at Super Proton Synchrotron (SPS) energies is not fully explained by the thermal model of hadron gas. Data reported by one experiment show sharp structures as a function of energy which are interpreted as a signature for a phase transition, but due to discrepancies in the results between two different experiments, a conclusion can not be drawn. This thesis is part of an effort to build a database of the strangeness production at SPS energy. The particular subject of this work is a precise measurement of the production of K{sub S}{sup 0}. The results are compared with two other experiments and the prediction of the thermal model. The high precision data shed light on the systematics of strangeness production and allow clarification of the experimental status. The study of transverse momentum spectra provides information about the temperature and the radial expansion of the system. Here, as in the case of particle yields, interesting structures are visible as a function of energy. A rapid increase in the number of degrees of freedom is visible in the SPS region. A large part of the strangeness is carried by the neutral strange baryon {lambda}. Here the experimental situation is even more complicated because the reconstruction of the {lambda} yield requires large extrapolation to low transverse momentum. In this work first results on {lambda} production will be presented. (orig.)

  12. Optimization of laccase production from Marasmiellus palmivorus LA1 by Taguchi method of Design of experiments.

    Science.gov (United States)

    Chenthamarakshan, Aiswarya; Parambayil, Nayana; Miziriya, Nafeesathul; Soumya, P S; Lakshmi, M S Kiran; Ramgopal, Anala; Dileep, Anuja; Nambisan, Padma

    2017-02-13

    Fungal laccase has profound applications in different fields of biotechnology due to its broad specificity and high redox potential. Any successful application of the enzyme requires large scale production. As laccase production is highly dependent on medium components and cultural conditions, optimization of the same is essential for efficient product production. Production of laccase by fungal strain Marasmiellus palmivorus LA1 under solid state fermentation was optimized by the Taguchi design of experiments (DOE) methodology. An orthogonal array (L8) was designed using Qualitek-4 software to study the interactions and relative influence of the seven selected factors by one factor at a time approach. The optimum condition formulated was temperature (28 °C), pH (5), galactose (0.8%w/v), cupric sulphate (3 mM), inoculum concentration (number of mycelial agar pieces) (6Nos.) and substrate length (0.05 m). Overall yield increase of 17.6 fold was obtained after optimization. Statistical optimization leads to the elimination of an insignificant medium component ammonium dihydrogen phosphate from the process and contributes to a 1.06 fold increase in enzyme production. A final production of 667.4 ± 13 IU/mL laccase activity paves way for the application of this strain for industrial applications. Study optimized lignin degrading laccases from Marasmiellus palmivorus LA1. This laccases can thus be used for further applications in different scales of production after analyzing the properties of the enzyme. Study also confirmed the use of taguchi method for optimizations of product production.

  13. Data sheets of fission product release experiments for light water reactor fuel, (2)

    International Nuclear Information System (INIS)

    Ishiwatari, Nasumi; Nagai, Hitoshi; Takeda, Tsuneo; Yamamoto, Katsumune; Nakazaki, Chozaburo.

    1979-07-01

    This is the second data sheets of fission products (FP) release experiments for light water reactor fuel. Results of five FP release experiments from the third to the seventh are presented: results of pre-examinations of UO 2 pellets, photographs of parts of fuel rod assemblies for irradiation and the assemblies, operational conditions of JMTR and OWL-1, variations of radioiodine-131 level in the main loop coolant during experimental periods, and representative results of post-irradiation examinations of respective fuel rods. (author)

  14. Pion production in 3He collisions on complex nuclei: a comparison of theory with experiment

    International Nuclear Information System (INIS)

    Fulcher, L.P.; Banerjee, M.K.

    1976-01-01

    The BLSZ theory of inclusive pion production is applied to the (p,π + ) and the ( 3 He,π 0 ) reactions on 12 C. The calculations are based on plane waves for the projectile and pion wave functions and are compared with experiments. The effects of distortion are considered. The magnitudes of the (p,π + ) reaction cross sections are comparable to the experimental values, but for the ( 3 He,π 0 ) case the theoretical results are four or five orders of magnitude larger than the experiments

  15. Design of an experiment for the production of a foamed tin sample

    Science.gov (United States)

    Wernimont, E.

    1986-01-01

    One of the major experiments in the GAS container is concerned with the experimental production of a foamed metal. A foamed metal is one that contains a significant amount of gas bubbles suspended in its solid volume. Purdue's GAS team proposes to do this with the help of a solid zinc carbonate that gives off carbon dioxide at high temperatures. Because of low energy requirements, the metal used for this experiment is tin. It is hoped that the use of near zero environment will keep the suspended bubbles more uniform than in an Earth based process, hence not depleting the physical strength of the material as greatly as is observed on Earth.

  16. French fission products experiments performed in Cadarache and Valduc. Results comparison

    International Nuclear Information System (INIS)

    Anno, Jacques; Barreau, Anne; Hudelot, Jean Pascal; Girault, Emmanuel; Fouillaud, Patrick; Toubon, Herve

    2003-01-01

    Cofunded by Cogema, two complementary experimental programmes on burn up credit (BUC) related to fission products (FPs) are performed by CEA and IRSN at Cadarache and Valduc. After shortly recalling the main characteristics of each experiment, a first comparison of some results is presented, especially the energy range in which most part of cross section absorption are qualified. Both experiments exhibit great quality and accurate results, giving a high degree of confidence to the whole experimental French process of qualification devoted to BUC. (author)

  17. Agents Modeling Experience Applied To Control Of Semi-Continuous Production Process

    Directory of Open Access Journals (Sweden)

    Gabriel Rojek

    2014-01-01

    Full Text Available The lack of proper analytical models of some production processes prevents us from obtaining proper values of process parameters by simply computing optimal values. Possible solutions of control problems in such areas of industrial processes can be found using certain methods from the domain of artificial intelligence: neural networks, fuzzy logic, expert systems, or evolutionary algorithms. Presented in this work, a solution to such a control problem is an alternative approach that combines control of the industrial process with learning based on production results. By formulating the main assumptions of the proposed methodology, decision processes of a human operator using his experience are taken into consideration. The researched model of using and gathering experience of human beings is designed with the contribution of agent technology. The presented solution of the control problem coincides with case-based reasoning (CBR methodology.

  18. On line filtering of events in an experiment dedicated to the production of massive muon pairs

    International Nuclear Information System (INIS)

    Froberger, J.P.

    1980-07-01

    The NA10 experiment is dedicated to the inclusive production of pairs of massive muons in hadronic collisions, particularly in pion-nucleon collisions. This experiment allows the testing of the Drell-Yan model that describes the production process. The detector is composed of 8 proportional multiwire chambers. This work presents the development of an algorithm able to filter and select adequate events from the data flowing from the detector. Simulations show that the program running on GESPRO system is able to compute the mass of the muon pairs and to take the decision to ban or not the event in less than 20 μs. In the first chapter the author describes the Drell-Yan model. The methodology to analyse data and select adequate events is given in the second chapter. The algorithm is developed in the third chapter and tested with simulations in the fourth chapter. (A.C.)

  19. Enabling sustainable uranium production: The Inter-regional Technical Cooperation experience

    International Nuclear Information System (INIS)

    Tulsidas, H.; Zhang, J.

    2014-01-01

    Uranium production cycle activities are increasing worldwide, often in countries with little or no previous experience in such activities. Initial efforts in uranium exploration and mining were limited to a few countries, which progressed through a painful learning curve often associated with high socioeconomic costs. With time, good practices for the sustainable conduct of operations became well established, but new projects in different regional contexts continue to face challenges. Moreover, there have been highs and lows in the levels of activities and operations in the uranium industry, which has disrupted the stabilizing of the experiences and lessons learned, into a coherent body of knowledge. This collective experience, assimilated over time, has to be transferred to a new generation of experts, who have to be enabled to use this knowledge effectively in their local contexts in order to increase efficiency and reduce the footprint of the operations. This makes it sustainable and socially acceptable to local communities, as well as in the global context. IAEA has implemented several projects in the last five years to address gaps in transferring a coherent body of knowledge on sustainable uranium production from a well experienced generation of experts to a new generation facing similar challenges in different geographical, technological, economic and social contexts. These projects focused on enabling the new practitioners in the uranium production industry to avoid the mistakes of the past and to apply good practices established elsewhere, adapted to local needs. The approach was intended to bring considerable cost savings while attracting elevated levels of social acceptance. These projects were effective in introducing experts from different areas of the uranium production cycle and with different levels of experience to the availability of advanced tools that can make operations more efficient and productive, reduce footprint, increase competencies in

  20. Experience acquired by FRAGEMA in the utilization of reprocessed products in PWRs

    International Nuclear Information System (INIS)

    Francillon, G.; Morel, M.

    1989-01-01

    In France, the closure of the fuel cycle has for effect to conduct at the use in PWR of products descended from reprocessing, namely reprocessed Uranium and Plutonium. In this presentation limited at the thermo-mechanical conception of the fuel rod and at the neutronic conception of the fuel assembly we describe the requirements to take into account for the conception and give the experience acquired by FRAGEMA [fr

  1. Validation of MORET 4 perturbation against 'physical' type fission products experiments

    International Nuclear Information System (INIS)

    Anno, Jacques; Jacquet, Olivier; Miss, Joachim

    2003-01-01

    After shortly recalling one among the many pertinent recent features of the French criticality CRISTAL package i.e. the perturbation algorithm (so called MORET 4 'Perturbation' or MP), this paper presents original MP validations. Numerical and experimental validations are made using close fission products (FP) experiments. As results, it is shown that, all being equal, MP can detect FP's absorption cross-section variations in the range 0.3-1.2%. (author)

  2. Experiences on removal of sodium-water reaction products in SWAT-3

    International Nuclear Information System (INIS)

    Tanabe, H.; Hiroi, H.; Sato, M.; Otaka, J.

    2002-01-01

    This report summarizes experiences and information concerning the removal of sodium water reaction products (SMRP) obtained through large leak tests of the Steam Generator Safety Test Facility (SWAT-3) at PNC/OEC, which were conducted to validate the safety design of steam generators of a prototype LMFBR Monju. The following three problems are discussed here: (1) drainability of SWRP, (2) removal of SWRP by using a cold trap, and (3) steam cleaning of SWRP. (author)

  3. Operative experience in handling enriched uranium compounds in an U3O8 production plant

    International Nuclear Information System (INIS)

    Friedenthal, M.; Cardenas Yucra, H.R.; Cinat, E.; Pino, H.F.; Surin, C.

    1987-01-01

    The design of a nuclear installation associated with chemical processes depends fundamentally on the risks derived from the materials and process used. The operative experience brings useful data mainly related to the ventilation and equipment design that allow to improve the handling of operational incidents and maintenance work. The paper presents the results extracted from a production campaign; ambient and personal monitoring results from monitorings performed routinely and during special interventions are commented. (Author)

  4. Experiments on the nuclear fragmentation and on the production of radioactive beams for direct reactions

    International Nuclear Information System (INIS)

    Weiss, A.

    1993-06-01

    In April 1992 at the GSI a prototype experiment on the production and study of the double-magic radioactive nucleus 56 Ni was successfully performed with proton scattering in inverse kinematics. A 350 MeV/u 56 Ni primary beam from the heavy ion synchrotron SIS was fragmented in a 4/g/cm 2 thick beryllium target. The separation of the formed isotopes ensued in the fragment separator FRS, which was operated in the achromatic mode with a degrader. Production cross sections for a whole series of fragments in the range 29≥Z≥19 and 57≥A≥41 were obtained. It succeeded to detect proton-rich isotopes at the boundary of the stability as for instance 52 Co, 51 Co, 50 Co, or 52 Ni and to determine for the first time their production cross sections. A further part of this thesis with regard to experiments with radioactive beams were first test experiments at the experimental storage ring ESR. The spotlight held luminosity measurements at the internal gas target with cooled, stable proton beam. For this the elastic scattering was stuided in inverse kinematics in the Rutherford range. Studied were different projectile beams (Ne, Xe) at energies of 150 MeV/u respectively 250 MeV/u and gas jets of nitrogen, argon, and hydrogen. The measured energy spectra of the recoils are in agreement with simulation calculations

  5. Photon Production through Multi-step Processes Important in Nuclear Fluorescence Experiments

    International Nuclear Information System (INIS)

    Hagmann, C; Pruet, J

    2006-01-01

    The authors present calculations describing the production of photons through multi-step processes occurring when a beam of gamma rays interacts with a macroscopic material. These processes involve the creation of energetic electrons through Compton scattering, photo-absorption and pair production, the subsequent scattering of these electrons, and the creation of energetic photons occurring as these electrons are slowed through Bremsstrahlung emission. Unlike single Compton collisions, during which an energetic photon that is scattered through a large angle loses most of its energy, these multi-step processes result in a sizable flux of energetic photons traveling at large angles relative to an incident photon beam. These multi-step processes are also a key background in experiments that measure nuclear resonance fluorescence by shining photons on a thin foil and observing the spectrum of back-scattered photons. Effective cross sections describing the production of backscattered photons are presented in a tabular form that allows simple estimates of backgrounds expected in a variety of experiments. Incident photons with energies between 0.5 MeV and 8 MeV are considered. These calculations of effective cross sections may be useful for those designing NRF experiments or systems that detect specific isotopes in well-shielded environments through observation of resonance fluorescence

  6. LOFT/LP-FP-1B, Loss of Fluid Test, Fission Product Release Experiment

    International Nuclear Information System (INIS)

    1989-01-01

    1 - Description of test facility: The LOFT Integral Test Facility is a scale model of a LPWR. The intent of the facility is to model the nuclear, thermal-hydraulic phenomena which would take place in a LPWR during a LOCA. The general philosophy in scaling coolant volumes and flow areas in LOFT was to use the ratio of the LOFT core [50 MW(t)] to a typical LPWR core [3000 MW(t)]. For some components, this factor is not applied; however, it is used as extensively as practical. In general, components used in LOFT are similar in design to those of a LPWR. Because of scaling and component design, the LOFT LOCA is expected to closely model a LPWR LOCA. 2 - Description of test: The seventh OECD LOFT experiment was conducted on 19 December 1984. It was the first of the two experiments to be performed in the LOFT facility with intentional release of fission products. Its objectives were to obtain data on fission product release from the fuel-cladding gap into vapor and reflood water and to collect data on transport of these fission products through and out of the reactor coolant system. The experiment was initiated by a reactor scram with one second delayed opening of the quick-opening blowdown valves. 3 - Experimental limitations or shortcomings: Short core and steam generator, excessive core bypass, other scaling compromises, and lack of adequate measurements in certain areas

  7. The Global Experience of Development of the Theory of Spatial Distribution of Productive Forces

    Directory of Open Access Journals (Sweden)

    Heiman Oleh A.

    2016-01-01

    Full Text Available The publication is aimed at theoretical generalization of the global experience of development of the theory of spatial distribution of productive forces as the basis of regional economy. Considering the evolution of scientific views on the spatial development of territories, taking account of the particularities of the distribution of production, one can allocate and identify several paradigms, which replaced each other, but preserved their connection with the placement of productive forces. Each one of these paradigms or all of them as a whole provide an example of a single historical process associated with the productive forces. Characteristic of a methodology based on the spatiotemporal paradigm is consideration of both time and space factors, which, in substance, take on the qualities of economic categories. Speaking of the use of theoretical developments in the practice of regional development, it should be specified that programs, strategies and other regulations must take into account the linkage between the progressive and the negative trends as well as cyclical nature of economic development, including the global economy, identify the factors that accelerate or retard the passage of every evolutionary spiral, and observe consistency of the productive forces of region with the technological patterns of production.

  8. Experience with modular steam generator production and application of new testing methods

    International Nuclear Information System (INIS)

    Olesovsky

    Experience is reviewed gained at the Trebic IBZKG plant with the production of modular steam generators. The plant started producing steam generators for the Jaslovske Bohunice nuclear power plant in 1965. In addition to the steam generator for the A-1, the plant also produced a loop for the Melekess power plant and a steam generator for the BOR-60 reactor. Operating experience gained so far allowed improving the quality of the BOR steam generator, especially in the tube-tube plate joint. A double tube plate was used and the welded joint shape was changed. As a result of high requirements on the quality of welded joints, the steam generator has successfully been in operation for more then 10,000 hours. The existing experience was utilized in designing a new steam generator named Nadya. Many design and technological requirements were presented concerning the Nadya generator and many new checking operations have been included in technology. (Kr)

  9. Pyrolysis-GCMS Analysis of Solid Organic Products from Catalytic Fischer-Tropsch Synthesis Experiments

    Science.gov (United States)

    Locke, Darren R.; Yazzie, Cyriah A.; Burton, Aaron S.; Niles, Paul B.; Johnson, Natasha M.

    2015-01-01

    Abiotic synthesis of complex organic compounds in the early solar nebula that formed our solar system is hypothesized to occur via a Fischer-Tropsch type (FTT) synthesis involving the reaction of hydrogen and carbon monoxide gases over metal and metal oxide catalysts. In general, at low temperatures (less than 200 C), FTT synthesis is expected to form abundant alkane compounds while at higher temperatures (greater than 200 C) it is expected to product lesser amounts of n-alkanes and greater amounts of alkene, alcohol, and polycyclic aromatic hydrocarbons (PAHs). Experiments utilizing a closed-gas circulation system to study the effects of FTT reaction temperature, catalysts, and number of experimental cycles on the resulting solid insoluble organic products are being performed in the laboratory at NASA Goddard Space Flight Center. These experiments aim to determine whether or not FTT reactions on grain surfaces in the protosolar nebula could be the source of the insoluble organic matter observed in meteorites. The resulting solid organic products are being analyzed at NASA Johnson Space Center by pyrolysis gas chromatography mass spectrometry (PY-GCMS). PY-GCMS yields the types and distribution of organic compounds released from the insoluble organic matter generated from the FTT reactions. Previously, exploratory work utilizing PY-GCMS to characterize the deposited organic materials from these reactions has been reported. Presented here are new organic analyses using magnetite catalyst to produce solid insoluble organic FTT products with varying reaction temperatures and number of experimental cycles.

  10. The remote supervisory and controlling experiment system of traditional Chinese medicine production based on Fieldbus

    Science.gov (United States)

    Zhan, Jinliang; Lu, Pei

    2006-11-01

    Since the quality of traditional Chinese medicine products are affected by raw material, machining and many other factors, it is difficult for traditional Chinese medicine production process especially the extracting process to ensure the steady and homogeneous quality. At the same time, there exist some quality control blind spots due to lacking on-line quality detection means. But if infrared spectrum analysis technology was used in traditional Chinese medicine production process on the basis of off-line analysis to real-time detect the quality of semi-manufactured goods and to be assisted by advanced automatic control technique, the steady and homogeneous quality can be obtained. It can be seen that the on-line detection of extracting process plays an important role in the development of Chinese patent medicines industry. In this paper, the design and implement of a traditional Chinese medicine extracting process monitoring experiment system which is based on PROFIBUS-DP field bus, OPC, and Internet technology is introduced. The system integrates intelligence node which gathering data, superior sub-system which achieving figure configuration and remote supervisory, during the process of traditional Chinese medicine production, monitors the temperature parameter, pressure parameter, quality parameter etc. And it can be controlled by the remote nodes in the VPN (Visual Private Network). Experiment and application do have proved that the system can reach the anticipation effect fully, and with the merits of operational stability, real-time, reliable, convenient and simple manipulation and so on.

  11. Muonium production target for the muon g-2/EDM experiment at J-PARC

    Energy Technology Data Exchange (ETDEWEB)

    Kanda, Sohtaro

    2014-08-15

    There is more than three standard-deviations discrepancy between measurement and theoretical prediction of the muon anomalous magnetic moment. We are going to measure the precision value of muon g−2 and search for physics beyond standard model. In addition, we can search for muon EDM which violates CP symmetry. CP violation in charged lepton sector is currently not found. We are developing the “Ultra Cold Muon Beam” instead of tertiary muon beam with electric focusing. Ultra cold muon is realized by laser ionization of muonium (bound state of a muon and an electron) from the production target. Increase of muonium yield is essential for our experimental goal; 0.1ppm statistical precision. Muonium production experiment at J-PARC MLF MUSE is planned in 2012 autumn. In this paper, we discuss the development of muonium production target and positron detector for the study.

  12. Experience of attaining high labor productivity in a stoping face using mechanized complex 110PK-70

    Energy Technology Data Exchange (ETDEWEB)

    Reshetnikov, M N

    1982-01-01

    In 1979 when the first 1 million T of coal was produced at the mine ''Zyryanovskaya'' high volumes of coal extraction were attained in individual months: in January 102,300 T, in July 122,200 T. In 1980, high results were also attained. In January 106,000 T were extracted and in November 108,500 T of coal. The brigade has accumulated experience for introducing scientific organization of labor and improving labor productivity. In 1977 labor productivity of the workers in the stoping face was 31.5 T per shift, in 1978 variable productivity was elevated to 48.2 T. In 1979 labor productivity reached 67.3 T per shift. The best results for productivity was reached in June 1979, 90 T at the outlet, in February 1980--81.1 T per shift. The success of the brigade is formed of many factors, technical, organizational, economic. The basis for high labor productivity of the workers is timely preparation of new longwalls, normal production conditions for fulfillment of plans and the adopted socialist commitments. An important factor in the work of the extraction brigade is the type and condition of mining equipment. The level of work organization as a whole depends on the brigade, directly on the miners and the section leaders themselves. High conscientiousness of all the brigade members also is important for improving labor productivity. The majority of workers in the brigade (about 70%) are members of the party. Mass technical creativity of all the brigade members is also a great reserve for improving labor efficiency. The brigade has 24 efficiency experts who annually introduce 20-30 suggestions each aimed at improving work efficiency.

  13. [Evaluation of antioxidant properties of enriched bakery products in experiment on laboratory animals].

    Science.gov (United States)

    Nilova, L P; Pilipenko, T V

    2016-01-01

    The purpose was to study the effect of enriched bakery products in the diet of rats on indicators of prooxidant-antioxidant system of blood serum. Experiment was carried out on male Wistar rats with initial weight 140-180 g. After a quarantine during the preparatory period rats for 14 days were accustomed to the partial (50%) replacement of the standard diet by bakery products with standard compound­ing. Then, 7 groups of rats were formed: the 1st group of rats (control group, n=10) continued to receive bakery products of a standard composition; groups with the 2nd on 7th (experimental, n=8 in everyone) received enriched bakery products: the 2nd group - with blueberry powder; the 3rd group - with mountain ash powder; the 4th group - with sea-buckthorn powder; the 5th group - with flour of a pine nut; the 6th group - with rice bran oil; the 7th group - with pumpkin oil. The intensity of free radical oxidation and antioxidant activity (by chemiluminescence method), activity of superoxide dismutase and level of secondary oxidation products reacted with thiobarbituric acid (by spectrophotometry) were monitored in rat blood serum. It has been shown that the use of bakery products with different compounding in the animal diet had different effects on indicators of prooxidant-antioxidant system of blood serum. Bakery products containing sea buckthorn pomace powder, flour of pine nut and rice bran oil reduced intensity of free radical oxidation in rat blood serum by 36.0, 24.6 and 18.8%, respectively. It is suggested that bakery products containing flour of pine nut products brake a free radical oxidation in rat blood serum in case of simultaneous content of natural antioxidants and melanoidins. The anthocyanins of powder from blueberry berries can render antioxidant effect and slow down formation of by-products of oxidation. No statistically significant change on indicators of prooxidant-antioxidant system of blood serum of rats treated with bakery products with rowan

  14. H-bar and H-bar + production cross sections for the GBAR experiment

    International Nuclear Information System (INIS)

    Comini, P; Hervieux, P-A

    2013-01-01

    The production and cooling of the H-bar + ion is the key point of the GBAR experiment (Gravitational Behaviour of Antihydrogen at Rest), which aims at performing the free fall of antihydrogen atoms to measure g-bar , the acceleration of antimatter on Earth. H-bar + ions will be obtained from collisions between a positronium cloud and antiprotons delivered by the AD/ELENA facility at CERN, with intermediate formation of antihydrogen atoms. In order to optimise the experimental production of H-bar + ions, we computed the total cross sections of the two corresponding reactions, within the same theoretical framework of the Continuum Distorted Wave – Final State (CDW-FS) model. The different contributions of the H-bar excited states have been systematically investigated for different states of Ps. The results exhibit an increase of the H-bar production toward low kinetic energies, in agreement with experimental data and previous calculations, whereas the largest H-bar + production is obtained with low energy ground-state antihydrogen atoms. These theoretical predictions suggest that the overall production of H-bar + could be optimal for 2 keV antiproton impact energy, using positronium atoms prepared in the 2p state.

  15. Observation of Electroweak Single Top-Quark Production with the CDF II Experiment

    International Nuclear Information System (INIS)

    Lueck, Jan

    2009-01-01

    The standard model of elementary particle physics (SM) predicts, besides the top-quark pair production via the strong interaction, also the electroweak production of single top-quarks (19). Up to now, the Fermilab Tevatron proton-antiproton-collider is the only place to produce and study top quarks emerging from hadron-hadron-collisions. Top quarks were directly observed in 1995 during the Tevatron Run I at a center-of-mass energy of √s = 1.8 TeV simultaneously by the CDF and D0 Collaborations via the strong production of top-quark pairs. Run II of the Tevatron data taking period started 2001 at √s = 1.96 TeV after a five year upgrade of the Tevatron accelerator complex and of both experiments. One main component of its physics program is the determination of the properties of the top quark including its electroweak production. Even though Run II is still ongoing, the study of the top quark is already a successful endeavor, confirmed by dozens of publications from both Tevatron experiments. A comprehensive review of top-quark physics can be found in reference. The reasons for searching for single top-quark production are compelling. As the electroweak top-quark production proceeds via a Wtb vertex, it provides the unique opportunity of the direct measurement of the CKM matrix element |V tb |, which is expected to be |V tb | ∼ 1 in the SM. Significant deviations from unity could be an indication of a fourth quark generation, a production mode via flavor-changing neutral currents, and other new phenomena, respectively. There are two dominating electroweak top-quark production modes at the Fermilab Tevatron: the t-channel exchange of a virtual W boson striking a b quark and the s-channel production of a timelike W boson via the fusion of two quarks. In proton-antiproton-collisions the third electroweak production mode, the associated Wt production of an on-shell W boson in conjunction with a top quark has a comparatively negligible small predicted cross section

  16. Observation of Electroweak Single Top-Quark Production with the CDF II Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Lueck, Jan [Karlsruhe Inst. of Technology (Germany)

    2009-07-24

    The standard model of elementary particle physics (SM) predicts, besides the top-quark pair production via the strong interaction, also the electroweak production of single top-quarks [19]. Up to now, the Fermilab Tevatron proton-antiproton-collider is the only place to produce and study top quarks emerging from hadron-hadron-collisions. Top quarks were directly observed in 1995 during the Tevatron Run I at a center-of-mass energy of √s = 1.8 TeV simultaneously by the CDF and D0 Collaborations via the strong production of top-quark pairs. Run II of the Tevatron data taking period started 2001 at √s = 1.96 TeV after a five year upgrade of the Tevatron accelerator complex and of both experiments. One main component of its physics program is the determination of the properties of the top quark including its electroweak production. Even though Run II is still ongoing, the study of the top quark is already a successful endeavor, confirmed by dozens of publications from both Tevatron experiments. A comprehensive review of top-quark physics can be found in reference. The reasons for searching for single top-quark production are compelling. As the electroweak top-quark production proceeds via a Wtb vertex, it provides the unique opportunity of the direct measurement of the CKM matrix element |Vtb|, which is expected to be |Vtb| ~ 1 in the SM. Significant deviations from unity could be an indication of a fourth quark generation, a production mode via flavor-changing neutral currents, and other new phenomena, respectively. There are two dominating electroweak top-quark production modes at the Fermilab Tevatron: the t-channel exchange of a virtual W boson striking a b quark and the s-channel production of a timelike W boson via the fusion of two quarks. In proton-antiproton-collisions the third electroweak production mode, the associated Wt production of an on-shell W boson in conjunction with a top quark has a comparatively negligible small

  17. Factors Constraining Local Food Crop Production in Indonesia: Experiences from Kulon Progo Regency, Yogyakarta Special Province

    Directory of Open Access Journals (Sweden)

    RADEN RIJANTA

    2013-01-01

    Full Text Available Local food crops are believed to be important alternatives in facing the problems of continuously growing price of food stuff worldwide. There has been a strong bias in national agricultural development policy towards the production of rice as staple food in Indonesia. Local food crops have been neglected in the agricultural development policy in the last 50 years, leading to the dependency on imported commodities and creating a vulnerability in the national food security. This paper aims at assessing the factors constraining local food production in Indonesia based on empirical experiences drawn from a research in Kulon Progo Regency, Yogyakarta Province. The government of Kulon Progo Regency has declared its commitment in the development of local food commodities as a part of its agricultural development policy, as it is mentioned in the long-term and medium-term development planning documents. There is also a head regency decree mandating the use of local food commodities in any official events organized by the government organisations. The research shows that there are at least six policy-related problems and nine technical factors constraining local food crops production in the regency. Some of the policy-related and structural factors hampering the production of local food crops consist of (1 long-term policy biases towards rice, (2 strong biases on rice diet in the community, (3 difficulties in linking policy to practices, (4 lack of information on availability of local food crops across the regency and (5 external threat from the readily available instant food on local market and (6 past contra-productive policy to the production of local food crops. The technical factors constraining local food production comprises (1 inferiority of the food stuff versus the instantly prepared food, (2 difficulty in preparation and risk of contagion of some crops, lack of technology for processing, (3 continuity of supply (some crops are seasonally

  18. Fission Product Transport and Source Terms in HTRs: Experience from AVR Pebble Bed Reactor

    Directory of Open Access Journals (Sweden)

    Rainer Moormann

    2008-01-01

    Full Text Available Fission products deposited in the coolant circuit outside of the active core play a dominant role in source term estimations for advanced small pebble bed HTRs, particularly in design basis accidents (DBA. The deposited fission products may be released in depressurization accidents because present pebble bed HTR concepts abstain from a gas tight containment. Contamination of the circuit also hinders maintenance work. Experiments, performed from 1972 to 88 on the AVR, an experimental pebble bed HTR, allow for a deeper insight into fission product transport behavior. The activity deposition per coolant pass was lower than expected and was influenced by fission product chemistry and by presence of carbonaceous dust. The latter lead also to inconsistencies between Cs plate out experiments in laboratory and in AVR. The deposition behavior of Ag was in line with present models. Dust as activity carrier is of safety relevance because of its mobility and of its sorption capability for fission products. All metal surfaces in pebble bed reactors were covered by a carbonaceous dust layer. Dust in AVR was produced by abrasion in amounts of about 5 kg/y. Additional dust sources in AVR were ours oil ingress and peeling of fuel element surfaces due to an air ingress. Dust has a size of about 1  m, consists mainly of graphite, is partly remobilized by flow perturbations, and deposits with time constants of 1 to 2 hours. In future reactors, an efficient filtering via a gas tight containment is required because accidents with fast depressurizations induce dust mobilization. Enhanced core temperatures in normal operation as in AVR and broken fuel pebbles have to be considered, as inflammable dust concentrations in the gas phase.

  19. Ten ways to design for disgust, sadness, and other enjoyments: A design approach to enrich product experiences with negative emotions

    OpenAIRE

    Fokkinga, S.F.; Desmet, P.M.A.

    2013-01-01

    This paper demonstrates how designers can enrich user experiences by purposefully involving negative emotions in user-product interaction. This approach is derived from a framework of rich experience, which explains how and under what circumstances negative emotions make a product experience richer and enjoyable. The approach consists of three steps, where the designer decides 1) which negative emotion is most appropriate for the user context; 2) how and when this emotion is best elicited; an...

  20. Strengthening maintenance and reconstruction of scientific experiment building and creating a good working environment for scientific research and production

    International Nuclear Information System (INIS)

    Fu Jianping

    2005-01-01

    The quality of scientific experiment building directly influences the scientific research work and production. To create a good working environment for scientific research and production, it is necessary to strengthen the maintenance and reconstruction for old scientific experiment building. The paper briefly introduces the site supervisory work of maintaining and reconstructing old scientific experiment building in Beijing Research Institute of Uranium Geology, as well as some measures taken to ensure the project quality, and the reconstructed building. (authors)

  1. MODELING AND ANALYSIS OF FISSION PRODUCT TRANSPORT IN THE AGR-3/4 EXPERIMENT

    Energy Technology Data Exchange (ETDEWEB)

    Humrickhouse, Paul W.; Collin, Blaise P.; Hawkes, Grant L.; Harp, Jason M.; Demkowicz, Paul A.; Petti, David A.

    2016-11-01

    In this work we describe the ongoing modeling and analysis efforts in support of the AGR-3/4 experiment. AGR-3/4 is intended to provide data to assess fission product retention and transport (e.g., diffusion coefficients) in fuel matrix and graphite materials. We describe a set of pre-test predictions that incorporate the results of detailed thermal and fission product release models into a coupled 1D radial diffusion model of the experiment, using diffusion coefficients reported in the literature for Ag, Cs, and Sr. We make some comparisons of the predicted Cs profiles to preliminary measured data for Cs and find these to be reasonable, in most cases within an order of magnitude. Our ultimate objective is to refine the diffusion coefficients using AGR-3/4 data, so we identify an analytical method for doing so and demonstrate its efficacy via a series of numerical experiments using the model predictions. Finally, we discuss development of a post-irradiation examination plan informed by the modeling effort and simulate some of the heating tests that are tentatively planned.

  2. Vector meson production in the dimuon channel in the ALICE experiment at the LHC

    CERN Document Server

    Massacrier, L.

    2011-01-01

    The purpose of the ALICE experiment at the LHC is the study of the Quark Gluon Plasma (QGP) formed in ultra-relativistic heavy-ion collisions, a state of matter in which quarks and gluons are deconfined. The properties of this state of strongly-interacting matter can be accessed through the study of light vector mesons ($\\rho$, $\\omega$ and $\\phi$). Indeed, the strange quark content ($s\\bar{s}$) of the $\\phi$ meson makes its study interesting in connection with the strangeness enhancement observed in heavy-ion collisions. Moreover, $\\rho$ and $\\omega$ spectral function studies give information on chiral symmetry restoration. Vector meson production in pp collisions is important as a baseline for heavy-ion studies and for constraining hadronic models. We present results on light vector meson production obtained with the muon spectrometer of the ALICE experiment in pp collisions at $\\sqrt{s}$=7 TeV. Production ratios, integrated and differential cross sections for $\\phi$ and $\\omega$ are presented. Those result...

  3. Enhanced ergonomics approaches for product design: a user experience ecosystem perspective and case studies.

    Science.gov (United States)

    Xu, Wei

    2014-01-01

    This paper first discusses the major inefficiencies faced in current human factors and ergonomics (HFE) approaches: (1) delivering an optimal end-to-end user experience (UX) to users of a solution across its solution lifecycle stages; (2) strategically influencing the product business and technology capability roadmaps from a UX perspective and (3) proactively identifying new market opportunities and influencing the platform architecture capabilities on which the UX of end products relies. In response to these challenges, three case studies are presented to demonstrate how enhanced ergonomics design approaches have effectively addressed the challenges faced in current HFE approaches. Then, the enhanced ergonomics design approaches are conceptualised by a user-experience ecosystem (UXE) framework, from a UX ecosystem perspective. Finally, evidence supporting the UXE, the advantage and the formalised process for executing UXE and methodological considerations are discussed. Practitioner Summary: This paper presents enhanced ergonomics approaches to product design via three case studies to effectively address current HFE challenges by leveraging a systematic end-to-end UX approach, UX roadmaps and emerging UX associated with prioritised user needs and usages. Thus, HFE professionals can be more strategic, creative and influential.

  4. Study of Λ+c production and Pentaquark search in WA89 CERN experiment data

    International Nuclear Information System (INIS)

    Charignon, F.

    1995-01-01

    This thesis is dedicated to the study of the Λ c + charmed baryon and to the ''Pentaquark'' search, within the framework of the CERN WA89 experiment. This fixed target experiment is using a 330 GeV/c hyperon beam. Its aim is the production and the study of baryons carrying charm and strangeness as well as the search of multiquarks. The experimental setup is built around the CERN Omega spectrometer. Production and decay vertices of charmed particles are reconstructed by means of microstrip detectors. Multiwire proportional chambers reconstruct the trajectories in the Omega magnetic field and particle identification is provided by a Ring Imaging Cherenkov detector. An invariant mass signal has been obtained for the Λ c + in the proton-kaon-pion decay channel. Distorsion effects occurring in the event reconstruction have been taken into account in the estimation of the Λ c + lifetime and production cross-section. Finally, the exotic multiquark state ''Pentaquark'' was investigated in the channel proton-phi-pion but no signal was observed. (author). 86 refs., 56 figs

  5. Narrative transportation and product involvement : how narrativity factors are used to enchance transportive experience in advertising for high vs. low involvement products

    OpenAIRE

    Phusapan, Panida

    2013-01-01

    This paper examines and presents how narrativity factors are used to enhance consumers‟ transportive experience when advertising for high and low involvement products. It specifically looks at processing experiences among Thai online consumers when viewing TV commercials available on a YouTube channel. The paper brings the theory of product involvement into a field of narrative transportation. Results show that narrativity factors should be used with the right balance across all narrativity l...

  6. A philosophical experiment: empirical study of knowledge production at the LHC

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    How is new knowledge produced in the natural sciences? This question has long been an issue of central relevance for philosophers, historians and sociologists of science, who have fiercely debated whether and how the emergence of new scientific knowledge can be described as following regular patterns, for example as far as the interplay of theory and experiment is concerned. To this aim, more or less recent historical examples have been used as empirical case studies, and widely diverging conclusions have at times been drawn from the same material. The interdisciplinary, DFG-funded project-cluster "Epistemology of the LHC" (University of Wuppertal, Germany) has in the past three years attempted to investigate knowledge production "in real time" by following the interplay of theory and experiment unfold during the first phase of LHC activity and how the knowledge landscape of high energy physics accordingly did (or did not) change. To try and reconstruct some aspects of this epistemic dynamics, the project ...

  7. New indoor environment chambers and field experiment offices for research on human comfort, health and productivity

    DEFF Research Database (Denmark)

    Toftum, Jørn; Langkilde, Gunnar; Fanger, Povl Ole

    2004-01-01

    The article describes three new indoor environment chambers, a new laboratory for the study of air movement in spaces and five offices for controlled environment exposures of human subjects in field experiments at the International Centre for Indoor Environment and Energy, Technical University of...... of Denmark. Together with three older chambers, the Centre now has at its disposal 12 spaces for studying indoor environments and their impact on human comfort, health and productivity.......The article describes three new indoor environment chambers, a new laboratory for the study of air movement in spaces and five offices for controlled environment exposures of human subjects in field experiments at the International Centre for Indoor Environment and Energy, Technical University...

  8. Promoting energy-efficient products: GEF experience and lessons for market transformation in developing countries

    International Nuclear Information System (INIS)

    Birner, Sabrina; Martinot, Eric

    2005-01-01

    The Global Environment Facility (GEF) has allocated more than $90 million over the past 10 years to eight projects promoting energy-efficient products in developing and transition countries. We review the early experience from these projects and suggest lessons relevant to market transformation programs. Based on GEF project designs, we also propose a menu of generic supply-side and demand-side interventions useful for designing and analyzing market transformation programs. Experience suggests that institutional and policy changes, leading to sustained price reductions and higher market volumes, are important outcomes for market transformation; that market impacts can appear early in programs due to increased expectations and awareness; and that projects can have a catalytic effect. We recommend eight principles for designers of future projects but caution that no single approach guarantees success

  9. A Survey Study on Customer Experience in Banking Cash Management Products and, Participation Banking Example

    Directory of Open Access Journals (Sweden)

    Cüneyt DİRİCAN

    2016-04-01

    Full Text Available Banking as a safe bridge of risk management balances relation between deposit and loan. In the growing trend of interest-free banking Turkey practice, Participation Banking is working to fix the expectations of customers with reasonable solutions. For corporate customers with comprehensive cash management expectations, producing appropriate and fast solutions are important for a positive and sustainable customer experience. Cash Management covers collection of trade receivables and short -term debt payments. In this study, in the light of the financial ratios of participation banking within the banking industry, a participation bank customers' experiences and expectations in cash management products and services were evaluated with the survey methodology and its importance were also examined.

  10. Determination of effective cross sections and production rates for tritium in the irradiation experiment TRIDEX

    International Nuclear Information System (INIS)

    Weise, L.

    1986-04-01

    In the framework of the development of a fusion reactor blanket the irradiation experiment TRIDEX (Tritium Recovery Irradiation DIDO Experiment) takes place at the Juelich Research Reactor FRJ-2 (DIDO). For this equipment the required neutronic calculations have been performed. The aim was the determination of the neutron spectrum and several therefrom derived integral parameters for the irradiation positions in interest. From the calculated effective cross sections for the formation of Tritium resulting from irradiated Lithium samples on one hand and from measured neutron flux densities on the other hand, all needed quantities of the Tritium production could be determined. The calculation of the neutron spectrum has been performed in a two-dimensional x-y-geometry. The neutron flux densities have been gained by gamma-spectrometric measurement of the activities in irradiated activation samples. (orig.) [de

  11. Using Labeled Choice Experiments to Analyze Demand Structure and Market Position among Seafood Products

    DEFF Research Database (Denmark)

    Nguyen, Thong Tien; Solgaard, Hans Stubbe; Haider, Wolfgang

    2018-01-01

    Understanding market competition and consumer preferences are important first steps in developing a business. In a competitive market, effectiveness of the various elements of a firm’s marketing mix depends not only on the absolute value of each element but also on the relative values......-employed consumers are the most sensitive to price. Four segments are identified and described in terms of both consumer characteristics and preferences. Our results are meaningful for producers and retailers to develop marketing strategies and production plan....... of the elements with respect to the firm’s position in the market. In this paper we analyze the demand structure and market positions for a variety of seafood products in the French retail market. We use a labeled choice experiment (LCE) to analyze twelve seafood species. The choice options are labeled...

  12. Experiences in management of production systems of social interest: The case of Corpoc and Furmos foundation

    Directory of Open Access Journals (Sweden)

    Marcela Camacho Montoya

    2013-01-01

    Full Text Available The theories of human development from human capabilities have, as theoretical references, the competencies of affiliation, achievement and power, as well as the analysis of business management. This article aims to compare experiences of productive systems of social interest from an analysis of the particular cases of the Furmos and Corpoc companies. The starting point was a previous project conducted in Corpoc; information was gathered through interviews and work sessions, and the institutions were characterized. It was found that the Corpoc management model is flat associative with a single leader and the Furmos model is a strategic associative partnership management model. Their members depend on the leader with their motivations and achievements, and their projects do not have a management model. Therefore, the lack of a suitable formulation of management models prevents the continuity and success of social production projects in the two institutions.

  13. Electroweak production of the top quark in the Run II of the D0 experiment

    Energy Technology Data Exchange (ETDEWEB)

    Clement, Benoit [Louis Pasteur Univ., Strasbourg (France)

    2006-04-28

    The work exposed in this thesis deals with the search for electroweak production of top quark (single top) in proton-antiproton collisions at √s = 1.96 TeV. This production mode has not been observed yet. Analyzed data have been collected during the Run II of the D0 experiment at the Fermilab Tevatron collider. These data correspond to an integrated luminosity of 370 pb-1. In the Standard Model, the decay of a top quark always produce a high momentum bottom quark. Therefore bottom quark jets identification plays a major role in this analysis. The large lifetime of b hadrons and the subsequent large impact parameters relative to the interaction vertex of charged particle tracks are used to tag bottom quark jets. Impact parameters of tracks attached to a jet are converted into the probability for the jet to originate from the primary vertex. This algorithm has a 45% tagging efficiency for a 0.5% mistag rate. Two processes (s and t channels) dominate single top production with slightly different final states. The searched signature consists in 2 to 4 jets with at least one bottom quark jet, one charged lepton (electron or muon) and missing energy accounting for a neutrino. This final state is background dominated and multivariate techniques are needed to separate the signal from the two main backgrounds: associated production of a W boson and jets and top quarks pair production. The achieved sensitivity is not enough to reach observation and we computed upper limits at the 95% confidence level at 5 pb (s-channel) and 4.3 pb (t-channel) on single top production cross-sections.

  14. The influence of orthographic experience on the development of phonological preparation in spoken word production.

    Science.gov (United States)

    Li, Chuchu; Wang, Min

    2017-08-01

    Three sets of experiments using the picture naming tasks with the form preparation paradigm investigated the influence of orthographic experience on the development of phonological preparation unit in spoken word production in native Mandarin-speaking children. Participants included kindergarten children who have not received formal literacy instruction, Grade 1 children who are comparatively more exposed to the alphabetic pinyin system and have very limited Chinese character knowledge, Grades 2 and 4 children who have better character knowledge and more exposure to characters, and skilled adult readers who have the most advanced character knowledge and most exposure to characters. Only Grade 1 children showed the form preparation effect in the same initial consonant condition (i.e., when a list of target words shared the initial consonant). Both Grade 4 children and adults showed the preparation effect when the initial syllable (but not tone) among target words was shared. Kindergartners and Grade 2 children only showed the preparation effect when the initial syllable including tonal information was shared. These developmental changes in phonological preparation could be interpreted as a joint function of the modification of phonological representation and attentional shift. Extensive pinyin experience encourages speakers to attend to and select onset phoneme in phonological preparation, whereas extensive character experience encourages speakers to prepare spoken words in syllables.

  15. Central production of two-pseudoscalar meson systems at the COMPASS experiment at CERN

    Energy Technology Data Exchange (ETDEWEB)

    Austregesilo, Alexander

    2014-10-20

    COMPASS is a fixed-target experiment at the CERN SPS which recorded a data set with an incident proton beam impinging on a liquid hydrogen target in order to study the central production of light scalar mesons. We select events with two protons and two pseudo-scalar mesons in the final state and decompose their angular distribution in terms of partial-wave amplitudes. Fits to the mass-dependence of these amplitudes are used to determine the Breit-Wigner parameters of scalar resonances.

  16. Modelling third harmonic ion cyclotron acceleration of deuterium beams for JET fusion product studies experiments

    DEFF Research Database (Denmark)

    Schneider, M.; Johnson, T.; Dumont, R.

    2016-01-01

    Recent JET experiments have been dedicated to the studies of fusion reactions between deuterium (D) and Helium-3 (3He) ions using neutral beam injection (NBI) in synergy with third harmonic ion cyclotron radio-frequency heating (ICRH) of the beam. This scenario generates a fast ion deuterium tail...... enhancing DD and D3He fusion reactions. Modelling and measuring the fast deuterium tail accurately is essential for quantifying the fusion products. This paper presents the modelling of the D distribution function resulting from the NBI+ICRF heating scheme, reinforced by a comparison with dedicated JET fast...

  17. Second international comparison on measuring techniques of tritium production rate for fusion neutronics experiments (ICMT-2)

    International Nuclear Information System (INIS)

    Maekawa, Fujio; Maekawa, Hiroshi

    1993-02-01

    An second international comparison on measuring techniques of tritium production rates for fusion neutronics experiments (ICMT-2) has been performed. The purpose is to evaluate the measurement accuracy of tritium production rates in the current measurement techniques. Two 14 MeV neutron source facilities, FNS at JAERI-Japan and LOTUS at EPFL-Switzerland, were used for this purpose. Nine groups out of seven countries participated in this program. A fusion simulated blanket assembly of simple-geometry was served as the test bed at each facility, in which Li-containing samples from the participants were irradiated in an uniform neutron field. The tritium production rates were determined by the participants using their own ways by using the liquid scintillation counting method. Tritiated water sample with unknown but the same concentration was also distributed and its concentration was measured to make a common reference. The standard deviation of measured tritium production rates among participants was about 10 % for both FNS and LOTUS irradiation levels: 4x10 -13 T-atoms/Li-atom and 1.6x10 -12 T-atoms/Li-atom at a sample, respectively. This standard deviation exceeds the expected deviation of 5 % in this program. It is presumed that the deviation of 10 % is caused mainly by the systematic and unknown errors in a process of tritium extraction from the irradiated samples depending on each organization. (author)

  18. Results of the experiment on chemical identification of Db as a decay product of element 115

    International Nuclear Information System (INIS)

    Dmitriev, S.N.; Oganesyan, Yu.Ts.; Utenkov, V.K.

    2004-01-01

    For the first time the chemical identification of Db as the terminal isotope of the decay element 115 produced via the 243 Am( 48 Ca, 3n) 288 115 reaction was realized. The experiment was performed on the U400 cyclotron of FLNR, JINR. The 243 Am target was bombarded with a beam dose of 3.4 · 10 18 48 Ca projectiles at an energy of 247 MeV in the center of the target. The reaction products were collected in the surface of a copper catcher block, which was removed with a lathe and then dissolved in concentrated HNO 3 . The group 5 elements were separated by sorption onto Dowex 50X8 cation-exchange resin with subsequent desorption using 1 M HF, which forms anionic fluoride complexes of group 5 elements. The eluant was evaporated onto 0.4 μm thick polyethylene foils which were placed between a pair of semiconductor detectors surrounded by 3 He neutron counters for measurement of α particles, fission fragments and neutrons. Over the course of the experiment, we observed 15 spontaneous fission events with T 1/2 = 32 -7 +11 h which we attribute to 268 Db. The production cross section for the 243 Am + 48 Ca reaction was 4.2 -1.2 + 1 .6 pb. These results agree with the original element 115 synthesis experiment where 268 Db was first observed as the terminal isotope following the five consecutive α decays from the 288 115 parent nucleus at the Dubna gas-filled separator. The data from the present experiment give independent evidence for the synthesis of element 115 as well as element 113 via the 243 Am + 48 Ca reaction

  19. Asymmetric responses of primary productivity to precipitation extremes: A synthesis of grassland precipitation manipulation experiments.

    Science.gov (United States)

    Wilcox, Kevin R; Shi, Zheng; Gherardi, Laureano A; Lemoine, Nathan P; Koerner, Sally E; Hoover, David L; Bork, Edward; Byrne, Kerry M; Cahill, James; Collins, Scott L; Evans, Sarah; Gilgen, Anna K; Holub, Petr; Jiang, Lifen; Knapp, Alan K; LeCain, Daniel; Liang, Junyi; Garcia-Palacios, Pablo; Peñuelas, Josep; Pockman, William T; Smith, Melinda D; Sun, Shanghua; White, Shannon R; Yahdjian, Laura; Zhu, Kai; Luo, Yiqi

    2017-10-01

    Climatic changes are altering Earth's hydrological cycle, resulting in altered precipitation amounts, increased interannual variability of precipitation, and more frequent extreme precipitation events. These trends will likely continue into the future, having substantial impacts on net primary productivity (NPP) and associated ecosystem services such as food production and carbon sequestration. Frequently, experimental manipulations of precipitation have linked altered precipitation regimes to changes in NPP. Yet, findings have been diverse and substantial uncertainty still surrounds generalities describing patterns of ecosystem sensitivity to altered precipitation. Additionally, we do not know whether previously observed correlations between NPP and precipitation remain accurate when precipitation changes become extreme. We synthesized results from 83 case studies of experimental precipitation manipulations in grasslands worldwide. We used meta-analytical techniques to search for generalities and asymmetries of aboveground NPP (ANPP) and belowground NPP (BNPP) responses to both the direction and magnitude of precipitation change. Sensitivity (i.e., productivity response standardized by the amount of precipitation change) of BNPP was similar under precipitation additions and reductions, but ANPP was more sensitive to precipitation additions than reductions; this was especially evident in drier ecosystems. Additionally, overall relationships between the magnitude of productivity responses and the magnitude of precipitation change were saturating in form. The saturating form of this relationship was likely driven by ANPP responses to very extreme precipitation increases, although there were limited studies imposing extreme precipitation change, and there was considerable variation among experiments. This highlights the importance of incorporating gradients of manipulations, ranging from extreme drought to extreme precipitation increases into future climate change

  20. Production cavity and central optics for a light shining through a wall experiment

    International Nuclear Information System (INIS)

    Hodajerdi, Reza

    2015-02-01

    The unexplained nature of dark matter and dark energy is a prominent reason for investigating physics beyond the standard model of particle physics (SM). Some extensions of the SM propose weakly interacting slim particles (WISPs). In an attempt to prove the existence of these particles, Light shining through the wall (LSW) experiments explore a very weak coupling between WISPs and photons (and viceversa). LSW experiments employ high-power lasers that provide a well defined flux of photons for the WISP-Photon conversion. The ALPS-I experiment at DESY in Hamburg was the first successful experiment with a high finesse optical resonator to enhance the laser power in a strong magnetic field in order to increase the photon to WISP conversion probability. The ALPS-II experimental concept adds a second optical cavity to also increase the reconversion probability. Both cavities are separated by a wall, amplify light at 1064 nm and share a common optical axis. Operating these two cavities inside 20 straightened HERA superconducting dipole magnets and using a transition edge sensor (TES) as a single photon detector will make the ALPS-II experiment almost three orders of magnitude more sensitive than its predecessor. Since photons, originating from reconverted WISPs in the regeneration cavity (RC) have 1064 nm wavelengths, the RC has to be locked to the production cavity (PC) with light of a different wavelength. Therefore frequency doubled PCs light will be used to lock the RC. This 532 nm light shall not arrive at the TES to prevent background noise. To achieve this, an optical attenuation system for wavelengths different from 1064 nm is required. In my thesis, the required attenuation was estimated and an optical setup was proposed and constructed and tested. It attenuates green photons by a factor of of 10 -18 and transmits 85% of the infrared photons. Furthermore the high finesse production cavity of ALPS-IIa was set up and characterized during this thesis. The PC reached

  1. Production of proteinase A by Saccharomyces cerevisiae in a cell-recycling fermentation system: Experiments and computer simulations

    DEFF Research Database (Denmark)

    Grøn, S.; Biedermann, K.; Emborg, Claus

    1996-01-01

    experimentally and by computer simulations. Experiments and simulations showed that cell mass and product concentration were enhanced by high ratios of recycling. Additional simulations showed that the proteinase A concentration decreased drastically at high dilution rates and the optimal volumetric...... productivities were at high dilution rates just below washout and at high ratios of recycling. Cell-recycling fermentation gave much higher volumetric productivities and stable product concentrations in contrast to simple continuous fermentation....

  2. Central Production of Two-Pseudoscalar Meson Systems at the COMPASS Experiment at CERN

    CERN Document Server

    Austregesilo, Alexander; Mallot, Gerhard

    The question of the existence of glueballs is one of the unsolved problems in modern particle physics and can be regarded as a stringent test for quantum chromodynamics. Especially the supernumerous states in the light scalar meson spectrum are candidates for the observation of mixing effects between $q\\bar q$ mesons and pure gluonic bound states. On the other hand, the existence and the properties of many resonances in this sector are disputed. The COMPASS experiment was proposed to make significant contributions to this field. COMPASS is a fixed-target experiment at the CERN SPS which focused on light-quark hadron spectroscopy during the data taking periods in 2008 and 2009. A world-leading data set was collected with a $190\\,\\mathrm{GeV}/c$ hadron beam impinging on a liquid hydrogen target in order to study, inter alia, the central production of glueball candidates in the light meson sector. Especially the double-Pomeron exchange mechanism is well suited for the production of mesons without valenc...

  3. Study of the Z Boson Production at the ATLAS Experiment with First Data

    CERN Document Server

    Schott, Matthias

    The ATLAS detector, currently in its final installation phase at CERN, is designed to provide precise measurements of 14 TeV proton-proton collisions at the Large Hadron Collider. The measurements of the cross section and transverse momentum spectrum of the Z boson production at LHC provides first tests of the standard model in a new energy domain and may reveal exotic physics processes. Moreover, the properties of the Z boson resonance and its decay into two muons are known to very high precision from LEP experiments and hence can be used as a physics process for calibration and alignment. The Z boson production is also a common background process for many other physics analyses and must therefore be well understood. This thesis describes a measurement strategy of the cross section s for the process pp->Z->(mu)(mu) at the ATLAS experiment during its startup phase. As a result of this study a precision of d(sigma)/ (sigma) = 0.006(stat) + 0.008(sys) + 0.01 (pdf) is expected for an integrated luminosity of 50 ...

  4. Transferring experience labs for production engineering students to universities in newly industrialized countries

    Science.gov (United States)

    Leiden, A.; Posselt, G.; Bhakar, V.; Singh, R.; Sangwan, K. S.; Herrmann, C.

    2018-01-01

    The Indian economy is one of the fastest growing economies in the world and the demand for the skilled engineers is increasing. Subsequently the Indian education sector is growing to provide the necessary number of skilled engineers. Current Indian engineering graduates have broad theoretical background but lack in methodological, soft and practical skills. To bridge this gap, the experience lab ideas from the engineering education at “Die Lernfabrik” (learning factory) of the Technische Universität Braunschweig (TU Braunschweig) is transferred to the Birla Institute of Technology and Science in Pilani (BITS Pilani), India. This Lernfabrik successfully strengthened the methodological, soft and practical skills of the TU Braunschweig production-engineering graduates. The target group is discrete manufacturing education with focusing on energy and resource efficiency as well as cyber physical production systems. As the requirements of industry and academia in India differs from Germany, the transfer of the experience lab to the Indian education system needs special attention to realize a successful transfer project. This publication provides a unique approach to systematically transfer the educational concept in Learning Factory from a specific university environment to a different environment in a newly industrialized country. The help of a bilateral university driven practice partnership between the two universities creates a lighthouse for the Indian university environment.

  5. AEgIS experiment: Towards antihydrogen beam production for antimatter gravity measurements

    CERN Document Server

    Mariazzi, Sebastiano; Amsler, Claude; Ariga, Akitaka; Ariga, Tomoko; Belov, Alexandre S; Bonomi, Germano; Bräunig, Philippe; Brusa, Roberto S; Bremer, Johan; Cabaret, Louis; Canali, Carlo; Caravita, Ruggero; Castelli, Fabrizio; Cerchiari, Giovanni; Cialdi, Simone; Comparat, Daniel; Consolati, Giovanni; Dassa, Luca; Derking, Jan Hendrik; Di Domizio, Sergio; Di Noto, Lea; Doser, Michael; Dudarev, Alexey; Ereditato, Antonio; Ferragut, Rafael; Fontana, Andrea; Genova, Pablo; Giammarchi, Marco; Gligorova, Angela; Gninenko, Sergei N; Hogan, Stephen D; Haider, Stefan; Jordan, Elena; Jørgensen, Lars V; Kaltenbacher, Thomas; Kawada, Jiro; Kellerbauer, Alban; Kimura, Mitsuhiro; Knecht, Andreas; Krasnický, Daniel; Lagomarsino, Vittorio; Lehner, Sebastian; Malbrunot, Chloe; Matveev, Viktor A; Merkt, Frederic; Moia, Fabio; Nebbia, Giancarlo; Nédélec, Patrick; Oberthaler, Markus K; Pacifico, Nicola; Petráček, Vojtech; Pistillo, Ciro; Prelz, Francesco; Prevedelli, Marco; Regenfus, Christian; Riccardi, Cristina; Røhne, Ole; Rotondi, Alberto; Sandaker, Heidi; Scampoli, Paola; Storey, James; Subieta Vasquez, Martin A.; Spaček, Michal; Czech Technical U. in Prague - FNSPE - B\\oehova 7 - 11519 - Praha 1 - Czech Aff25 Testera, Gemma; Vaccarone, Renzo; Villa, Fabio; Widmann, Eberhard; Zavatarelli, Sandra; Zmeskal, Johann

    2014-01-01

    AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) is an experiment that aims to perform the first direct measurement of the gravitational acceleration g of antihydrogen in the Earth’s field. A cold antihydrogen beam will be produced by charge exchange reaction between cold antiprotons and positronium excited in Rydberg states. Rydberg positronium (with quantum number n between 20 and 30) will be produced by a two steps laser excitation. The antihydrogen beam, after being accelerated by Stark effect, will fly through the gratings of a moir ́ e deflectometer. The deflection of the horizontal beam due to its free fall will be measured by a position sensitive detector. It is estimated that the detection of about 10 3 antihydrogen atoms is required to determine the gravitational acceleration with a precision of 1%. In this report an overview of the AEgIS experiment is presented and its current status is described. Details on the production of slow positronium and its excitation with lasers ar...

  6. Comparison of fission product release predictions using PARFUME with results from the AGR-1 irradiation experiment

    International Nuclear Information System (INIS)

    Collin, Blaise P.; Petti, David A.; Demkowicz, Paul A.; Maki, John T.

    2014-01-01

    The PARFUME (PARticle FUel ModEl) code was used to predict fission product release from tristructural isotropic (TRISO) coated fuel particles and compacts during the first irradiation experiment (AGR-1) of the Advanced Gas Reactor Fuel Development and Qualification program. The PARFUME model for the AGR-1 experiment used the fuel compact volume average temperature for each of the 620 days of irradiation to calculate the release of fission products silver, cesium, and strontium from a representative particle for a select number of AGR-1 compacts. Post-irradiation examination (PIE) measurements provided data on release of fission products from fuel compacts and fuel particles, and retention of fission products in the compacts outside of the silicon carbide (SiC) layer. PARFUME-predicted fractional release of these fission products was determined and compared to the PIE measurements. Results show an overall over-prediction of the fractional release of cesium by PARFUME. For particles with failed SiC layers, the over-prediction is by a factor of about two, corresponding to an over-estimation of the diffusivity in uranium oxycarbide (UCO) by a factor of about 100. For intact particles, whose release is much lower, the over-prediction is by an average of about an order of magnitude, which could additionally be attributed to an over-estimated diffusivity in SiC by about 30%. The release of strontium from intact particles is also over-estimated by PARFUME, which also points towards an over-estimated diffusivity of strontium in either SiC or UCO, or possibly both. The measured strontium fractional release from intact particles varied considerably from compact to compact, making it difficult to assess the effective over-estimation of the diffusivities. Furthermore, the release of strontium from particles with failed SiC is difficult to observe experimentally due to the release from intact particles, preventing any conclusions to be made on the accuracy or validity of the

  7. Two years of experience with the [ 18F]FDG production module

    Science.gov (United States)

    Kim, Sang Wook; Hur, Min Goo; Chai, Jong-Seo; Park, Jeong Hoon; Yu, Kook Hyun; Jeong, Cheol Ki; Lee, Goung Jin; Min, Young Don; Yang, Seung Dae

    2007-08-01

    Chemistry module for a conventional [18F]FDG production by using tetrabutylammonium bicarbonate (TBA) and an acidic hydrolysis has been manufactured and evaluated. In this experiment, 75 mM (pH 7.5-7.8) of TBA solution and a ca. 2-curies order of [18F]-fluoride have been used for the evaluation. The commercial acidic purification cartridge was purchased from GE or UKE. The operation system (OS) was programmed with Lab-View which was selected because of its easy customization of the OS. Small sized solenoid valves (Burkert; type 6124) were selected to reduce the module dimensions (W 350 × D 270 × H 250). The total time for the synthesis of [18F]FDG was 30 ± 3 min. The production yield of [18F]FDG was 60 ± 2% on an average at EOS, with the decay uncorrected. This experimental data show that the traditional chemistry module can provide a good [18F]FDG production yield by optimizing the operational conditions. The radiochemical purity, radionuclidic purity, acidity, residual solvent, osmolality and endotoxin were determined to assess the quality of [18F]FDG. The examined contents for the quality control of [18F]FDG were found to be suitable for a clinical application.

  8. Experience of on-site disposal of production uranium-graphite nuclear reactor.

    Science.gov (United States)

    Pavliuk, Alexander O; Kotlyarevskiy, Sergey G; Bespala, Evgeny V; Zakharova, Elena V; Ermolaev, Vyacheslav M; Volkova, Anna G

    2018-04-01

    The paper reported the experience gained in the course of decommissioning EI-2 Production Uranium-Graphite Nuclear Reactor. EI-2 was a production Uranium-Graphite Nuclear Reactor located on the Production and Demonstration Center for Uranium-Graphite Reactors JSC (PDC UGR JSC) site of Seversk City, Tomsk Region, Russia. EI-2 commenced its operation in 1958, and was shut down on December 28, 1990, having operated for the period of 33 years all together. The extra pure grade graphite for the moderator, water for the coolant, and uranium metal for the fuel were used in the reactor. During the operation nitrogen gas was passed through the graphite stack of the reactor. In the process of decommissioning the PDC UGR JSC site the cavities in the reactor space were filled with clay-based materials. A specific composite barrier material based on clays and minerals of Siberian Region was developed for the purpose. Numerical modeling demonstrated the developed clay composite would make efficient geological barriers preventing release of radionuclides into the environment. Copyright © 2018 Elsevier Ltd. All rights reserved.

  9. Double-quarkonium production at a fixed-target experiment at the LHC (AFTER@LHC)

    CERN Document Server

    Lansberg, Jean-Philippe

    2015-01-01

    We present predictions for double-quarkonium production in the kinematical region relevant for the proposed fixed-target experiment using the LHC beams (dubbed as AFTER@LHC). These include all spin-triplet S -wave charmonium and bottomonium pairs, i.e. Psi(n_1S) + Psi(n_2S), Psi(n_1S) + Upsilon(m_1S) and Upsilon(m_1S) + Upsilon(m_2S ) with n_1,n_2 = 1,2 and m_1,m_2 = 1,2,3. We calculate the contributions from double-parton scatterings and single-parton scatterings. With an integrated luminosity of 20 fb-1 to be collected at AFTER@LHC, we find that the yields for double-charmonium production are large enough for differential distribution measurements. We discuss some differential distributions for J/Psi + J/Psi production, which can help to study the physics of double-parton and single-parton scatterings in a new energy range and which might also be sensitive to double intrinsic c-bar(c) coalescence at large negative Feynman x.

  10. How the Monte Carlo production of a wide variety of different samples is centrally handled in the LHCb experiment

    CERN Document Server

    Corti, G; Clemencic, M; Closier, J; Couturier, B; Kreps, M; Mathe, Z; O'Hanlon, D; Robbe, P; Romanovsky, V; Stagni, F; Zhelezov, A

    2015-01-01

    In the LHCb experiment a wide variety of Monte Carlo simulated samples needs to be produced for the experiment's physics program. Monte Carlo productions are handled centrally similarly to all massive processing of data in the experiment. In order to cope with the large set of different types of simulation samples, necessary procedures based on common infrastructures have been set up with a numerical event type identification code used throughout. The various elements in the procedure, from writing a configuration for an event type to deploying them on the production environment, from submitting and processing a request to retrieving the sample produced as well as the conventions established to allow their interplay will be described. The choices made have allowed a high level of automation of Monte Carlo productions that are handled centrally in a transparent way with experts concentrating on their specific tasks. As a result the massive Monte Carlo production of the experiment is efficiently processed on a ...

  11. Fission product monitoring of TRISO coated fuel for the advanced gas reactor-1 experiment

    International Nuclear Information System (INIS)

    Scates, Dawn M.; Hartwell, John K.; Walter, John B.; Drigert, Mark W.; Harp, Jason M.

    2010-01-01

    The US Department of Energy has embarked on a series of tests of TRISO coated particle reactor fuel intended for use in the Very High Temperature Reactor (VHTR) as part of the Advanced Gas Reactor (AGR) program. The AGR-1 TRISO fuel experiment, currently underway, is the first in a series of eight fuel tests planned for irradiation in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The AGR-1 experiment reached a peak compact averaged burnup of 9% FIMA with no known TRISO fuel particle failures in March 2008. The burnup goal for the majority of the fuel compacts is to have a compact averaged burnup greater than 18% FIMA and a minimum compact averaged burnup of 14% FIMA. At the INL the TRISO fuel in the AGR-1 experiment is closely monitored while it is being irradiated in the ATR. The effluent monitoring system used for the AGR-1 fuel is the Fission Product Monitoring System (FPMS). The FPMS is a valuable tool that provides near real-time data indicative of the AGR-1 test fuel performance and incorporates both high-purity germanium (HPGe) gamma-ray spectrometers and sodium iodide [NaI(Tl)] scintillation detector-based gross radiation monitors. To quantify the fuel performance, release-to-birth ratios (R/B's) of radioactive fission gases are computed. The gamma-ray spectra acquired by the AGR-1 FPMS are analyzed and used to determine the released activities of specific fission gases, while a dedicated detector provides near-real time count rate information. Isotopic build up and depletion calculations provide the associated isotopic birth rates. This paper highlights the features of the FPMS, encompassing the equipment, methods and measures that enable the calculation of the release-to-birth ratios. Some preliminary results from the AGR-1 experiment are also presented.

  12. Accelerated approval of oncology products: the food and drug administration experience.

    Science.gov (United States)

    Johnson, John R; Ning, Yang-Min; Farrell, Ann; Justice, Robert; Keegan, Patricia; Pazdur, Richard

    2011-04-20

    We reviewed the regulatory history of the accelerated approval process and the US Food and Drug Administration (FDA) experience with accelerated approval of oncology products from its initiation in December 11, 1992, to July 1, 2010. The accelerated approval regulations allowed accelerated approval of products to treat serious or life-threatening diseases based on surrogate endpoints that are reasonably likely to predict clinical benefit. Failure to complete postapproval trials to confirm clinical benefit with due diligence could result in removal of the accelerated approval indication from the market. From December 11, 1992, to July 1, 2010, the FDA granted accelerated approval to 35 oncology products for 47 new indications. Clinical benefit was confirmed in postapproval trials for 26 of the 47 new indications, resulting in conversion to regular approval. The median time between accelerated approval and regular approval of oncology products was 3.9 years (range = 0.8-12.6 years) and the mean time was 4.7 years, representing a substantial time savings in terms of earlier availability of drugs to cancer patients. Three new indications did not show clinical benefit when confirmatory postapproval trials were completed and were subsequently removed from the market or had restricted distribution plans implemented. Confirmatory trials were not completed for 14 new indications. The five longest intervals from receipt of accelerated approval to July 1, 2010, without completion of trials to confirm clinical benefit were 10.5, 6.4, 5.5, 5.5, and 4.7 years. The five longest intervals between accelerated approval and successful conversion to regular approval were 12.6, 9.7, 8.1, 7.5, and 7.4 years. Trials to confirm clinical benefit should be part of the drug development plan and should be in progress at the time of an application seeking accelerated approval to prevent an ineffective drug from remaining on the market for an unacceptable time.

  13. Few multiyear precipitation-reduction experiments find a shift in the productivity-precipitation relationship.

    Science.gov (United States)

    Estiarte, Marc; Vicca, Sara; Peñuelas, Josep; Bahn, Michael; Beier, Claus; Emmett, Bridget A; Fay, Philip A; Hanson, Paul J; Hasibeder, Roland; Kigel, Jaime; Kröel-Dulay, Gyorgy; Larsen, Klaus Steenberg; Lellei-Kovács, Eszter; Limousin, Jean-Marc; Ogaya, Romà; Ourcival, Jean-Marc; Reinsch, Sabine; Sala, Osvaldo E; Schmidt, Inger Kappel; Sternberg, Marcelo; Tielbörger, Katja; Tietema, Albert; Janssens, Ivan A

    2016-07-01

    Well-defined productivity-precipitation relationships of ecosystems are needed as benchmarks for the validation of land models used for future projections. The productivity-precipitation relationship may be studied in two ways: the spatial approach relates differences in productivity to those in precipitation among sites along a precipitation gradient (the spatial fit, with a steeper slope); the temporal approach relates interannual productivity changes to variation in precipitation within sites (the temporal fits, with flatter slopes). Precipitation-reduction experiments in natural ecosystems represent a complement to the fits, because they can reduce precipitation below the natural range and are thus well suited to study potential effects of climate drying. Here, we analyse the effects of dry treatments in eleven multiyear precipitation-manipulation experiments, focusing on changes in the temporal fit. We expected that structural changes in the dry treatments would occur in some experiments, thereby reducing the intercept of the temporal fit and displacing the productivity-precipitation relationship downward the spatial fit. The majority of experiments (72%) showed that dry treatments did not alter the temporal fit. This implies that current temporal fits are to be preferred over the spatial fit to benchmark land-model projections of productivity under future climate within the precipitation ranges covered by the experiments. Moreover, in two experiments, the intercept of the temporal fit unexpectedly increased due to mechanisms that reduced either water loss or nutrient loss. The expected decrease of the intercept was observed in only one experiment, and only when distinguishing between the late and the early phases of the experiment. This implies that we currently do not know at which precipitation-reduction level or at which experimental duration structural changes will start to alter ecosystem productivity. Our study highlights the need for experiments with

  14. Innovation in retail: impact on creating a positive experience when buying fashion products

    Directory of Open Access Journals (Sweden)

    Cristinel Vasiliu

    2015-05-01

    Full Text Available Innovation in fashion retail is critical in order to ensure competitive advantage in a constantly evolving market, in terms of consumer expectations. The modern customer is mobile, permanently connected to the Internet, well-informed about international trends, mindful of the quality of products, but more price sensitive and less loyal to a brand. The shopping experience provided by retailers is a crucial factor in purchase decision, encompassing all these variables in a complex concept of exogenous variable. As retailers’ efforts to provide excellence in shopping experience are focused on operating costs and thus on the profit margins, it is important to consider and identify which are the most relevant variables that form the perception of excellence for Romanian customers, so that retailers can innovate according to their expectations. The purpose of this article was to highlight the role of innovation in creating a positive experience for consumers buying clothes, shoes and accessories. The approach was based on the conduct of exploratory research. The research ? represented by five original objectives and as many different working scenarios ? resulted in the identification of thematic outlined exploratory opinions, exploiting a first investigation of its kind in Romania, less Pearson coefficients used in the analysis of ordinal variables or hierarchical, but quickly assessed using SPSS, version 21. As a pioneering research emphasis was on identifying potential associations and quantified correlations and less on rigorous delimitation of exogenous or endogenous quality in general, leaving room for future studies, sharper and with a higher degree of representation. Thus, we could highlight some useful aspects of the investigated retailers, by the dominant character of interested customers’ opinions according to their volunteer responses. Consumers are accustomed to using the Internet to obtain information; they rarely express opinions on

  15. A hydrogen production experiment by the thermo-chemical and electrolytic hybrid hydrogen production in lower temperature range. System viability and preliminary thermal efficiency estimation

    International Nuclear Information System (INIS)

    Takai, Toshihide; Nakagiri, Toshio; Inagaki, Yoshiyuki

    2008-10-01

    A new experimental apparatus by the thermo-chemical and electrolytic Hybrid-Hydrogen production in Lower Temperature range (HHLT) was developed and hydrogen production experiment was performed to confirm the system operability. Hydrogen production efficiency was estimated and technical problems were clarified through the experimental results. Stable operation of the SO 3 electrolysis cell and the sulfur dioxide solution electrolysis cell were confirmed during experimental operation and any damage which would be affected solid operation was not detected under post operation inspection. To improve hydrogen production efficiency, it was found that the reduction of sulfuric acid circulation and the decrease in the cell voltage were key issues. (author)

  16. Entdeckung elektroschwacher Produktion einzelner Top-Quarks mit dem CDF II Experiment; Discovery electroweak production of single top quarks with the CDF II Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Luck, Jan [Karlsruhe Inst. of Technology (KIT) (Germany)

    2009-01-01

    This thesis presents a neural network search for combined as well as separate s- and t-channel single top-quark production with the CDF II experiment at the Tevatron using 3.2 fb-1 of collision data. It is the twelfth thesis dealing with single top-quark production performed within the CDF Collaboration, whereas three have been done in Run I [53–55] and eight in Run II [23, 25, 28, 39, 56–59].

  17. Gallium‐68 DOTATATE Production with Automated PET Radiopharmaceutical Synthesis System: A Three Year Experience

    Directory of Open Access Journals (Sweden)

    Alireza Aslani

    2014-10-01

    Full Text Available Objective(s: Gallium‐68 (Ga‐68 is an ideal research and hospital‐based PET radioisotope. Currently, the main form of Ga‐68 radiopharmaceutical that is being synthesised in‐house is Ga‐68 conjugated with DOTA based derivatives. The development of automated synthesis systems has increased the reliability, reproducibility and safety of radiopharmaceutical productions. Here we report on our three year, 500 syntheses experience with an automated system for Ga‐68 DOTATATE. Methods: The automated synthesis system we use is divided into three parts of a servomotor modules, b single use sterile synthesis cassettes and, c a computerized system that runs the modules. An audit trail is produced by the system as a requirement for GMP production. The required reagents and chemicals are made in‐. The Germanium breakthrough is determined on a weekly basis. Production yields for each synthesis are calculated to monitor the performance and efficiency of the synthesis. The quality of the final product is assessed after each synthesis by ITLC‐SG and HPLC methods. Results: A total of 500 Ga‐68 DOTATATE syntheses (>800 patient doses were performed between March 2011 and February 2014. The average generator yield was 81.3±0.2% for 2011, 76.7±0.4% for 2012 and 75.0±0.3% for 2013. Ga‐68 DOTATATE yields for 2011, 2012, and 2013 were 81.8±0.4%, 82.2±0.4% and 87.9±0.4%, respectively. These exceed the manufacturer’s expected value of approximately 70%. Germanium breakthrough averaged 8.6×10‐6% of total activity which is well below the recommended level of 0.001%. The average ITLC‐measured radiochemical purity was above 98.5% and the average HPLC‐measured radiochemical purity was above 99.5%. Although there were some system failures during synthesis, there were only eight occasions where the patient scans needed to be rescheduled. Conclusion: In our experience the automated synthesis system performs reliably with a relatively low incident

  18. The role of linguistic experience in the processing of probabilistic information in production.

    Science.gov (United States)

    Gustafson, Erin; Goldrick, Matthew

    2018-01-01

    Speakers track the probability that a word will occur in a particular context and utilize this information during phonetic processing. For example, content words that have high probability within a discourse tend to be realized with reduced acoustic/articulatory properties. Such probabilistic information may influence L1 and L2 speech processing in distinct ways (reflecting differences in linguistic experience across groups and the overall difficulty of L2 speech processing). To examine this issue, L1 and L2 speakers performed a referential communication task, describing sequences of simple actions. The two groups of speakers showed similar effects of discourse-dependent probabilistic information on production, suggesting that L2 speakers can successfully track discourse-dependent probabilities and use such information to modulate phonetic processing.

  19. Experiment Plan of High Temperature Steam and Carbon dioxide Co-electrolysis for Synthetic Gas Production

    International Nuclear Information System (INIS)

    Yoon, Duk-Joo; Ko, Jae-Hwa

    2008-01-01

    Currently, Solid oxide fuel cells (SOFC) come into the spotlight in the middle of the energy technologies of the future for highly effective conversion of fossil fuels into electricity without carbon dioxide emission. The SOFC is a reversible cell. By applying electrical power to the cell, which is solid oxide electrolysis cell (SOEC), it is possible to produce synthetic gas (syngas) from high temperature steam and carbon dioxide. The produced syngas (hydrogen and carbon monoxide) can be used for synthetic fuels. This SOEC technology can use high temperature from VHTRs for high efficiency. This paper describes KEPRI's experiment plan of high temperature steam and carbon co-electrolysis for syngas production using SOEC technology

  20. Observation of single top-quark production with the CDF II experiment

    International Nuclear Information System (INIS)

    Lueck, J.

    2010-01-01

    We present the observation of electroweak single top-quark production using up to 3.2 fb -1 of data collected by the CDF experiment. Lepton plus jets candidate events are classified by four parallel analysis techniques: one likelihood discriminant, one matrix-element discriminant, one decision-tree discriminant, and one neural-network discriminant. These outputs are combined with a super discriminant based on a neural-network analysis in order to improve the expected sensitivity. In conjunction with one neural-network discriminant using a complementary dataset of MET plus jets events with a veto on identified leptons we observe a signal consistent with the standard model but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations.

  1. Observation of Single Top Quark production with the Cdf 2. Experiment

    International Nuclear Information System (INIS)

    Lueck, J.

    2010-01-01

    We present the observation of electroweak single top-quark production using up to 3.2 fb -1 of data collected by the Cdf experiment. Lepton plus jets candidate events are classified by four parallel analysis techniques: one likelihood discriminant, one matrix-element discriminant, one decision-tree discriminant, and one neural-network discriminant. These outputs are combined with a super discriminant based on a neural-network analysis in order to improve the expected sensitivity. In conjunction with one neural-network discriminant using a complementary dataset of Met plus jets events with a veto on identified leptons we observe a signal consistent with the standard model but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations.

  2. Measurement of J/{psi} production in proton-proton collisions by the PHENIX experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bruner, Nichelle [University of New Mexico, Albuquerque, NM (United States)

    2004-07-01

    The PHENIX experiment at the Relativistic Heavy Ion Collider has measured J/{psi} production in proton-proton collisions at {radical}(s)= 200 GeV using data from the 2001-2002 collider run. Distributions of rapidity and transverse momentum are presented and compared with theoretical predictions. The total cross section and mean p{sub T} are calculated and compared to fixed-target results. The total J/{psi} cross section is 4.0{+-}0.6(stat){+-}0.6(sys){+-}0.4(abs){mu}b. The mean p{sub T} is 1.80{+-}0.23(stat){+-}0.16(sys) GeV/c. (orig.)

  3. Measurement of J/ψ production in proton-proton collisions by the PHENIX experiment

    International Nuclear Information System (INIS)

    Bruner, Nichelle

    2004-01-01

    The PHENIX experiment at the Relativistic Heavy Ion Collider has measured J/ψ production in proton-proton collisions at √(s)= 200 GeV using data from the 2001-2002 collider run. Distributions of rapidity and transverse momentum are presented and compared with theoretical predictions. The total cross section and mean p T are calculated and compared to fixed-target results. The total J/ψ cross section is 4.0±0.6(stat)±0.6(sys)±0.4(abs)μb. The mean p T is 1.80±0.23(stat)±0.16(sys) GeV/c. (orig.)

  4. Plasma production for the 50 MeV plasma lens experiment at LBL

    International Nuclear Information System (INIS)

    Leemans, W.; van der Geer, B.; de Loos, M.; Conde, M.; Govil, R.; Chattopadhyay, S.

    1994-06-01

    The Center for Beam Physics at LBL has constructed a Beam Test Facility (BTF) housing a 50 MeV electron beam transport line, which uses the linac injector from the Advanced Light Source, and a terawatt Ti:Al 2 O 3 laser system. The linac operates at 50 MeV and generates 15 ps long electron bunches containing a charge of up to 2 nC. The measured unnormalized beam emittance is 0.33 mm-mrad. These parameters allow for a comprehensive study of focusing of relativistic electron beams with plasma columns, in both the overdense and underdense regime (adiabatic and tapered lenses). A study of adiabatic and/or tapered lenses requires careful control of plasma density and scale lengths of the plasma. We present experimental results on the production of plasmas through resonant two-photon ionization, with parameters relevant to an upcoming plasma lens experiment

  5. Search for Electroweak Single-Top Quark Production with the CDF II Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Buehler, Matthias; /Karlsruhe U., EKP

    2006-08-01

    The CDF II experiment and the Tevatron proton-antiproton collider are parts of the Fermi National Laboratories (Fermilab). The Fermilab is located in the vicinity of Chicago, USA. Today, the Tevatron is the only collider which is able to produce the heaviest known elementary particle, the top quark. The top quark was discovered at the Tevatron by the CDF and the D0 collaborations in 1995 [1]. So far, all the top quarks found are produced via the strong interaction as top-antitop pairs. The Standard Model of elementary particle physics also predicts single-top quark production via the electroweak interaction. This production mode has not yet been observed. The CDF and the D0 collaborations have set upper limits on the cross section for that process in Run I [2, 3] and improved those results in Run II [4, 5]. Single-top quark production is one of the major interests in Run II of the Tevatron as it offers several ways to test the Standard Model and to search for potential physics beyond the Standard Model. The measurement of the cross section of singly produced top quarks via the electroweak interaction offers the possibility to determine the Cabbibo-Kobayashi-Maskawa (CKM) matrix element V{sub tb} directly. The CKM matrix defines the transformation from the eigenstates of the electroweak interactions to the mass eigenstates of the quarks. V{sub tb} gives the strength of the coupling at the Wtb vertex. The single-top quark is produced at this vertex and therefore the cross section of the single-top quark production is directly proportional to |V{sub tb}|{sup 2}. In the Standard Model, three generations of quarks and the unitarity of the CKM matrix are predicted. This leads to V{sub tb} {approx} 1. Up to now, there is no possibility to measure V{sub tb} without using the assumption that there are a certain number of quark generations. Since the measurement of the cross section of single-top quark production is independent of this assumption it could verify another

  6. One year's experience of the WA medical cyclotron and radiopharmaceutical production facility

    International Nuclear Information System (INIS)

    DeRoach, J.; Tuchyna, T.; Jones, C.; Price, R.

    2004-01-01

    9 days owing to scheduled maintenance, and a total of 35 (1.6%) patients were cancelled owing to unscheduled maintenance on 7 days. The following major initiatives are now in place for the further development of this facility: 1. Development of a solid targetry facility for the production of 123 I, 124 I, 64 Cu, and other isotopes. Two prototype external beam lines have been developed and trialled. Experiments designed to measure the beam profile at the end of the external beam line are underway. 2. A synthesis module for the production of 18 FMISO and 18 FLT is being developed in-house in collaboration with the cyclotron manufacturer. 3. A module for the synthesis of 18 F-Choline has been installed. 4. A prototype synthesis module is under development which will allow experimentation in the production of novel radiopharmaceuticals based on isotopes produced from liquid targetry. Normalised over 12 months, production staff received on average 3.28 mSv whole body effective dose, with the worst case being 8.46 mSv. Finger doses were 35.6 mSv on average, 70.6 mSv worst case. (Note that production staff also dispense patient doses into individual syringes). Similarly, maintenance staff received 1.41 mSv (avg), 2.56 mSv (max) whole body effective dose, and 33.0 mSv (avg), 124.3 mSv (max) finger dose. A facility for the production and development of short-lived PET radiopharmaceuticals has been created with a capacity that is expected to satisfy Western Australian demands for the next ten years. This facility reliably and routinely produces FDG, and incorporates a well supported and vigorous radiopharmaceutical development function. Copyright (2004) Australasian College of Physical Scientists and Engineers in Medicine

  7. Zooplankton biomass and production in the North Sea during the Autumn Circulation experiment, October 1987–March 1988

    DEFF Research Database (Denmark)

    Hay, S.J.; Kiørboe, Thomas; Matthews, A.

    1991-01-01

    Distribution and abundance of zooplankton in the North Sea during the Autumn Circulation Experiment (October 1987–March 1988) were examined. From shipboard egg production incubations and the distributions of eggs, nauplii and females, the productivity of various copepod species was described. Aga...

  8. Recovery of different waste vegetable oils for biodiesel production: a pilot experience in Bahia State, Brazil.

    Science.gov (United States)

    Torres, Ednildo Andrade; Cerqueira, Gilberto S; Tiago, M Ferrer; Quintella, Cristina M; Raboni, Massimo; Torretta, Vincenzo; Urbini, Giordano

    2013-12-01

    In Brazil, and mainly in the State of Bahia, crude vegetable oils are widely used in the preparation of food. Street stalls, restaurants and canteens make a great use of palm oil and soybean oil. There is also some use of castor oil, which is widely cultivated in the Sertão Region (within the State of Bahia), and widely applied in industry. This massive use in food preparation leads to a huge amount of waste oil of different types, which needs either to be properly disposed of, or recovered. At the Laboratorio Energia e Gas-LEN (Energy & Gas lab.) of the Universidade Federal da Bahia, a cycle of experiments were carried out to evaluate the recovery of waste oils for biodiesel production. The experiences were carried out on a laboratory scale and, in a semi-industrial pilot plant using waste oils of different qualities. In the transesterification process, applied waste vegetable oils were reacted with methanol with the support of a basic catalyst, such as NaOH or KOH. The conversion rate settled at between 81% and 85% (in weight). The most suitable molar ratio of waste oils to alcohol was 1:6, and the amount of catalyst required was 0.5% (of the weight of the incoming oil), in the case of NaOH, and 1%, in case of KOH. The quality of the biodiesel produced was tested to determine the final product quality. The parameters analyzed were the acid value, kinematic viscosity, monoglycerides, diglycerides, triglycerides, free glycerine, total glycerine, clearness; the conversion yield of the process was also evaluated. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Monitoring system for the GRID Monte Carlo mass production in the H1 experiment at DESY

    International Nuclear Information System (INIS)

    Bystritskaya, Elena; Fomenko, Alexander; Gogitidze, Nelly; Lobodzinski, Bogdan

    2014-01-01

    The H1 Virtual Organization (VO), as one of the small VOs, employs most components of the EMI or gLite Middleware. In this framework, a monitoring system is designed for the H1 Experiment to identify and recognize within the GRID the best suitable resources for execution of CPU-time consuming Monte Carlo (MC) simulation tasks (jobs). Monitored resources are Computer Elements (CEs), Storage Elements (SEs), WMS-servers (WMSs), CernVM File System (CVMFS) available to the VO HONE and local GRID User Interfaces (UIs). The general principle of monitoring GRID elements is based on the execution of short test jobs on different CE queues using submission through various WMSs and directly to the CREAM-CEs as well. Real H1 MC Production jobs with a small number of events are used to perform the tests. Test jobs are periodically submitted into GRID queues, the status of these jobs is checked, output files of completed jobs are retrieved, the result of each job is analyzed and the waiting time and run time are derived. Using this information, the status of the GRID elements is estimated and the most suitable ones are included in the automatically generated configuration files for use in the H1 MC production. The monitoring system allows for identification of problems in the GRID sites and promptly reacts on it (for example by sending GGUS (Global Grid User Support) trouble tickets). The system can easily be adapted to identify the optimal resources for tasks other than MC production, simply by changing to the relevant test jobs. The monitoring system is written mostly in Python and Perl with insertion of a few shell scripts. In addition to the test monitoring system we use information from real production jobs to monitor the availability and quality of the GRID resources. The monitoring tools register the number of job resubmissions, the percentage of failed and finished jobs relative to all jobs on the CEs and determine the average values of waiting and running time for the

  10. PRODUCTION OF HIGHER STRENGTH THIN WALLED GLOW DISCHARGE POLYMER SHELLS FOR CRYOGENIC EXPERIMENTS AT OMEGA

    International Nuclear Information System (INIS)

    NIKROO, A; CZECHOWICZ, DG; CASTILLO, ER; PONTELANDOLFO, JM

    2002-01-01

    OAK A271 PRODUCTION OF HIGHER STRENGTH THIN WALLED GLOW DISCHARGE POLYMER SHELLS FOR CRYOGENIC EXPERIMENTS AT OMEGA. Thin walled polymer shells are needed for OMEGA cryogenic laser experiments. These capsules need to be about 900 (micro)m in diameter and as thin as possible (approx 1-2 (micro)m), while having enough strength to be filled with DT as fast as possible to about 1000 atm. The authors have found that by optimizing the coating parameters in the glow discharge polymer (GDP) deposition system, traditionally used for making ICF targets, they can routinely make robust, ∼ 1.5 (micro)m thick, 900 (micro)m diameter GDP shells with buckle strengths of over 0.3 atm. This is twice the strength of shells made prior to the optimization and is comparable to values quoted for polyimide shells. In addition, these shells were found to be approximately three times more permeable and over 20% denser than previously made GDP shells. The combination of higher strength and permeability is ideal for direct drive cryogenic targets at OMEGA. Shells as thin as 0.5 (micro)m have been made. In this paper, the authors discuss the shell fabrication process, effects of modifying various GDP deposition parameters on shell properties and chemical composition

  11. Results of the Experiment on Chemical Identification of Db as a Decay Product of Element 115

    CERN Document Server

    Dmitriev, S N; Utyonkov, V K; Shishkin, S V; Eremin, A V; Lobanov, Yu V; Tsyganov, Yu S; Chepigin, V I; Sokol, E A; Vostokin, G K; Aksenov, N V; Hussonnois, M; Itkis, M G; Aggeler, H W; Schumann, D; Bruchertseifer, H; Eichler, R; Shaughnessy, D A; Wilk, P A; Kenneally, J M; Stoyer, M A; Wild, J F

    2004-01-01

    For the first time the chemical identification of Db as the terminal isotope of the decay element 115 produced via the $^{243}{\\text{Am}}(^{48}{\\text{Ca}},3n)^{288}115$ reaction was realized. The experiment was performed on the U400 cyclotron of FLNR, JINR. The $^{243}$Am target was bombarded with a beam dose of $3.4\\cdot 10^{18}$ $^{48}$Ca projectiles at an energy of 247 MeV in the center of the target. The reaction products were collected in the surface of a copper catcher block, which was removed with a lathe and then dissolved in concentrated HNO$_3$. The group 5 elements were separated by sorption onto Dowex 50$\\times$8 cation-exchange resin with subsequent desorption using 1M HF, which forms anionic fluoride complexes of group 5 elements. The eluant was evaporated onto 0.4 $\\mu$m thick polyethylene foils which were placed between a pair of semiconductor detectors surrounded by $^3$He neutron counters for measurement of $\\alpha$ particles, fission fragments and neutrons. Over the course of the experiment...

  12. A precision measurement of charm dimuon production in neutrino interactions from the NOMAD experiment

    International Nuclear Information System (INIS)

    Samoylov, O.; Petti, R.; Alekhin, S.; Astier, P.; Autiero, D.; Baldisseri, A.; Baldo-Ceolin, M.; Banner, M.; Bassompierre, G.; Benslama, K.; Besson, N.; Bird, I.; Blumenfeld, B.; Bobisut, F.; Bouchez, J.; Boyd, S.; Bueno, A.; Bunyatov, S.; Camilleri, L.; Cardini, A.

    2013-01-01

    We present our new measurement of the cross-section for charm dimuon production in neutrino–iron interactions based upon the full statistics collected by the NOMAD experiment. After background subtraction we observe 15 344 charm dimuon events, providing the largest sample currently available. The analysis exploits the large inclusive charged current sample – about 9×10 6 events after all analysis cuts – and the high resolution NOMAD detector to constrain the total systematic uncertainty on the ratio of charm dimuon to inclusive Charged Current (CC) cross-sections to ∼2%. We also perform a fit to the NOMAD data to extract the charm production parameters and the strange quark sea content of the nucleon within the NLO QCD approximation. We obtain a value of m c (m c )=1.159±0.075 GeV/c 2 for the running mass of the charm quark in the MS ¯ scheme and a strange quark sea suppression factor of κ s =0.591±0.019 at Q 2 =20 GeV 2 /c 2

  13. A review of central production experiments at the CERN Omega spectrometer

    CERN Document Server

    Kirk, Andrew

    2014-01-01

    The non-Abelian nature of QCD suggests that particles that have a gluon constituent, such as glueballs or hybrids, should exist. This paper presents a study of central meson production in the fixed target experiments WA76, WA91 and WA102 at the CERN Omega spectrometer at centre-of-mass energies of $\\sqrt{s} = 12.7$, 23.8 and 29~GeV. A study of the resonance production cross section as a function of $\\sqrt{s}$ shows which states are compatible with being produced by Double Pomeron Exchange (DPE). In these DPE processes, the difference in the transverse momentum between the exchange particles ($dP_T)$ can be used to select out known $q\\overline q$ states from non-$q \\overline q$ candidates. The distribution of the azimuthal angle ($\\phi$) between the two exchange particles suggests that the Pomeron transforms like a non-conserved vector current. Finally there is evidence from an analysis of the the decay modes of the scalar states observed, that the lightest scalar glueball manifests itself through the mixing w...

  14. Study of diboson production (Z or W) in the ATLAS experiment from their leptonic decays

    CERN Document Server

    Kouskoura, Vasiliki; Dell'Acqua, Andrea

    In this dissertation, a study of ZZ and ZZ* production in proton-proton collisions at the Large Hadron Collider (LHC) at CERN is presented. The data analyzed in this study were recorded by the ATLAS experiment and correspond to integrated luminosities of 4.6 $\\rm{fb^{−1}}$ at a centre-of-mass energy of 7 TeV and of 20.3 $\\rm{fb^{−1}}$ at a centre-of-mass energy of 8 TeV. We select events consistent with fully leptonic ZZ decays, in particular to electrons and muons. In view of the forthcoming increase of the instantaneous luminosity of LHC, the ATLAS Collaboration foresees upgrades of the detector. In this doctoral thesis, an upgrade of the Muon Spectrometer is also presented. ZZ and ZZ* events are required to have four isolated leptons with high transverse momentum. The major backgrounds to the ZZ signal are events from Z+jets, top-quark production and other diboson processes. The background from Z+jets and top-quark contribution is estimated from data, and negligible contributions from diboson processes...

  15. Production and muonic decay of the Z0 intermediate vector boson in the UA1 experiment

    International Nuclear Information System (INIS)

    Leuchs, R.

    1988-01-01

    In the years 1982 to 1985 the intermediate bosons W +- and Z 0 were detected in all the leptonic decay channels. In the present work we examined experimentally the production of the Z 0 in proton-antiproton collisions, followed by decay of the Z 0 into two muons. At present this is possible only in the UA1 experiment. Within the framework of this work I was initially responsible for the correct data readout from the muon detector. For this purpose it was necessary to build a monitoring system based on microprocessors, which could be used to monitor and test our apparatus. This monitoring system contains numerous programs for the diagnosis of the equipment. In the analysis I first selected the Z 0 events in the runs of 1984 and 1985, and then determined the efficiency of this selection. I also participated in setting up the p/sub t//sup μ/ > 15 GeV/c selection. Then the Z 0 sample was tested for completeness, and the background calculated anew. The methods of energy balance and mass fitting were refined and systematized. Thus the production properties and the mass of the Z 0 could be determined for the first time for the entire measurement period of the UA1. The determination of the parameters of the standard model was done by also including the results of analyses from other decay channels of the W and Z bosons. 149 refs., 60 figs., 14 tabs

  16. LICENCE, DESIGN AND MARKETING EXPERIENCE RELATING TO A PRODUCT OR PROCESS

    Directory of Open Access Journals (Sweden)

    LIVIU NEAMŢU

    2013-08-01

    Full Text Available Contracting a licence is buying or selling contract of technology, design and marketing experiencerelating to a product or process, and involves the contracting of knowledge and know-how. The granting of aninternational licence takes place when a company provides, in return for a fee or royalties, technology needed byanother firm to run business operations on a foreign market. When in this form, the granting of the licencerequires at least one of the following items: a brand name; operating experience; manufacturing technology;access to patents and trade secrets/industrial. Company that grants the licence get access on a foreign marketwith very low investment and, in many cases, the benefits of investment and market knowledge of a competentlocal firms. The company that received the licence get access to foreign technology, with a very smallinvestment. There are several very obvious advantages of activity under the license on international markets.The granting of a licence can improve cash flow situation for the company that attaches. Because the license ontechnology allows companies to bring products to market faster, the company enjoys early advantage of apositive balance of cash flow. In addition, obtaining a license means lower development costs. The licensedactivity may mean fewer profits in the long run. Immediate benefits of easy access to new technology, lower costsand the development of an early cash flow are attractive advantages of contracting a licence.

  17. Experiments on the incorporation of concentrated solutions of fission products in glasses and micas

    International Nuclear Information System (INIS)

    Bonniaud, R.; Cohen, P.; Sombret, C.

    1958-01-01

    1) The plants designed for extracting the plutonium of the G1, G2, G3 reactors fuel rods will produce extremely concentrated solutions of fission products. 2) Let us consider a synthetic solution of the 'G2' type: (2N NO 3 H - 2,25 meq/cm 3 AI +++ - 5.10 -3 134 Cs - 137 Cs tracer). We made various glasses and micas by adding and mixing the necessary adjuvants and baking (900 to 1400 deg. C) in a graphite crucible. 3) The products obtained had either the shape of a cylindrical pellet or were reduced into a fine powder. They were mixed with 300 cm 3 of synthetic sea water during variable periods of time in order to study leaching of the activity. 4) Experiments were first carried on caesium because of its solubility. 5) Fabrication of micas on a large scale sets many technological problems more difficult to solve (1400 deg. C) than in the case of glasses (1000 deg. C). A comparative study on both micas and glasses showed that leaching of activity was more important in the micas. (author) [fr

  18. Production of high energy η' in B meson decays from BaBar experiment

    International Nuclear Information System (INIS)

    Hicheur, A.

    2003-04-01

    The work presented in this thesis relies on the analysis of data collected between october 1999 and July 2002 by the BaBar experiment at the PEP-II collider located at SLAC (Stanford, California). Electron-positron collisions at a center of mass energy equal to the Υ(4S) resonance mass are used for the production of B meson pairs. In July 2001, the BaBar collaboration published the first measurement of CP violation in the neutral B mesons system. Since then, the precision of the measurement has been continually being improved with the increasing data sample. Two devices are dedicated to the reconstruction of charged particles: the Silicon Vertex Tracker and the Drift Chamber. The Silicon Vertex Tracker is crucial for the reconstruction of the B meson decay vertex. Its motion with regard to the Drift Chamber needs a rolling calibration of the corresponding alignment parameters roughly every two hours. The relation between the Drift Chamber geometry and the alignment has been studied. Beside CP violation, Heavy Flavour Physics is an other important issue of BaBar research program. Rare decays are of particular interest as they are sensible to a new physics beyond the Standard Model. The production of high energy η' in B decays has been studied through the two main contributions, B→ η' X s coming from the rare decay b → sg*, and B-bar 0 → η'D 0 coming from the internal tree color suppressed decay b → cud. The improvement of the measurement of the process B → η'X-s and the first. observation of the decay B-bar 0 → η'D 0 have led to the conclusion that the η' production is dominated by the decay b → sg* and enables to constrain its quark content. (author)

  19. Production of direct drive cylindrical targets for inertial confinement fusion experiments

    International Nuclear Information System (INIS)

    Elliott, N.E.; Day, R.D.; Hatch, D.J.; Sandoval, D.L.; Gomez, V.M.; Pierce, T.H.; Elliott, J.E.; Manzanares, R.

    2002-01-01

    We have made targets with cylindrical geometry for Inertial Confinement Fusion (ICF) experiments. These targets are used in hydrodynamic experiments on the OMEGA laser at the University of Rochester. The cylindrical design allows the study of three dimensional hydrodynamic effects in a pseudo 2D mode, simplifying data gathering and analysis. Direct drive refers to the fact that the target is illuminated directly by approximately 50 laser beams and is imploded by the material pressure generated from ablation of the outside of the target. The production of cylindrical targets involves numerous steps. These steps are shared in common with many other types of ICF targets but no other single target type encompasses such a wide range of fabrication techniques. These targets consist of a large number of individual parts, all fabricated from commercially purchased raw material, requiring many machining, assembly, electroplating and chemical process steps. Virtually every manufacturing and assembly process we currently possess is involved in the production of these targets. The generic target consists of a plastic cylinder (ablator) that is roughly lmm in diameter by 2.25mm long. The wall of the cylinder is roughly 0.07mm thick. There is an aluminum cylinder 0.5mm wide and O.Olmm thick centered on the inside of the plastic cylinder and coaxial with the outside plastic cylinder. The outside of this aluminum band has surface finishes of differing random average roughness. The required average surface roughness is determined in advance by experimental design based on the amount of turbulent mix to be observed. The interior of the cylinder is filled with low density polystyrene foam that is made in house. To produce a finished target additional features are added to each target. X-ray backlighters are cantilevered off the target that allow time resolved x-ray images of the imploding target to be recorded during the experiment. The x-ray backlighters are driven by additional

  20. D-meson production by muons in the COMPASS experiment at CERN

    Energy Technology Data Exchange (ETDEWEB)

    Zvyagin, Alexander

    2011-01-21

    One of the physics goals of the COMPASS experiment at CERN was to measure the contribution of gluons to the nucleon spin. To achieve this, it was proposed to scatter polarized 160 GeV/c muons on a polarized deuteron target and to detect D mesons in the final state. The underlying process in this D meson production is supposed to be the Photon-Gluon Fusion (PGF), where a virtual photon emitted by the muon interacts with a gluon from the target nucleon, producing a charm-anticharm quark pair. Fragmentation of a charm (anticharm) quark leads with high probability to the creation of a D{sup 0} or D{sup *} meson, which COMPASS detects via the D{sup 0}{yields}K{pi} and D{sup *}{yields}D{sup 0}{pi}{yields}K{pi}{pi} decay modes. From the longitudinal cross section spin asymmetries of the D meson production and theoretical predictions for the PGF cross section, the gluon contribution to the nucleon spin has been measured by the COMPASS experiment. The results presented in the thesis are the following. Based on data from the year 2004 a total visible cross section of 1.8{+-}0.4 nb, for the D{sup *} meson production, has been measured, with the error being dominated by systematic effects. It is validated that the D mesons are indeed produced through the PGF process, by comparison of measured D meson kinematic distributions to the ones predicted by a theory (AROMA generator). A good agreement was found for the distribution shapes, which confirms that PGF plays a major role. However, a 20% difference was found in the number of produced D{sup 0} and D{sup 0} mesons (and for the D{sup *+} and D{sup *-} mesons as well) which is significantly larger than predicted by AROMA. Kinematic distributions of D{sup 0} and D{sup *} mesons were compared with the background and also with the nearby K{sup *}{sub 2}(1430){sup 0} resonance, using all longitudinal data taken in 2002-2006. The particle-antiparticle asymmetry has been studied as a function of several kinematic variables. The 20

  1. Study of the Z boson production at the ATLAS experiment with first data

    International Nuclear Information System (INIS)

    Schott, M.

    2007-06-01

    The ATLAS detector, currently in its final installation phase at CERN, is designed to provide precise measurements of 14 TeV proton-proton collisions at the Large Hadron Collider. The measurements of the cross section and transverse momentum spectrum of the Z boson production at LHC provides first tests of the standard model in a new energy domain and may reveal exotic physics processes. Moreover, the properties of the Z boson resonance and its decay into two muons are known to very high precision from LEP experiments and hence can be used as a physics process for calibration and alignment. The Z boson production is also a common background process for many other physics analyses and must therefore be well understood. This thesis describes a measurement strategy of the cross section σ for the process pp→γ/Z→μ + μ - at the ATLAS experiment during its startup phase. As a result of this study a precision of (Δσ)/(σ)∼0.006(stat)±0.008(sys) +0.016 -0.008 (pdf) is expected for an integrated luminosity of 50 pb -1 , assuming a fully operational ATLAS detector, not including uncertainties in the luminosity measurements. A major goal of the approach presented was to minimize the dependence on Monte Carlo simulations. Hence, several methods for the determination of the detector response based on data have been studied. In addition, a strategy for the differential cross section measurement (dσ)/(dp Z T ) of the transverse momentum of the Z boson has been developed. In contrast to a measurement of the total cross section, it is expected that the statistical uncertainty dominates for the given integrated luminosity of 50 pb -1 . The predicted high p T resolution of the ATLAS Inner Detector and the Muon Spectrometer allow for the first observation of interesting parton distribution effects, i.e. the so-called x-broadening, even with the limited statistics expected during the first data taking period.

  2. Study of the Z boson production at the ATLAS experiment with first data

    Energy Technology Data Exchange (ETDEWEB)

    Schott, M

    2007-06-15

    The ATLAS detector, currently in its final installation phase at CERN, is designed to provide precise measurements of 14 TeV proton-proton collisions at the Large Hadron Collider. The measurements of the cross section and transverse momentum spectrum of the Z boson production at LHC provides first tests of the standard model in a new energy domain and may reveal exotic physics processes. Moreover, the properties of the Z boson resonance and its decay into two muons are known to very high precision from LEP experiments and hence can be used as a physics process for calibration and alignment. The Z boson production is also a common background process for many other physics analyses and must therefore be well understood. This thesis describes a measurement strategy of the cross section {sigma} for the process pp{yields}{gamma}/Z{yields}{mu}{sup +}{mu}{sup -} at the ATLAS experiment during its startup phase. As a result of this study a precision of ({delta}{sigma})/({sigma}){approx}0.006(stat){+-}0.008(sys){sup +0.016}{sub -0.008}(pdf) is expected for an integrated luminosity of 50 pb{sup -1}, assuming a fully operational ATLAS detector, not including uncertainties in the luminosity measurements. A major goal of the approach presented was to minimize the dependence on Monte Carlo simulations. Hence, several methods for the determination of the detector response based on data have been studied. In addition, a strategy for the differential cross section measurement (d{sigma})/(dp{sup Z}{sub T}) of the transverse momentum of the Z boson has been developed. In contrast to a measurement of the total cross section, it is expected that the statistical uncertainty dominates for the given integrated luminosity of 50 pb{sup -1}. The predicted high p{sub T} resolution of the ATLAS Inner Detector and the Muon Spectrometer allow for the first observation of interesting parton distribution effects, i.e. the so-called x-broadening, even with the limited statistics expected during the

  3. Atmosphere dependence of fission products release: The Vercors 4 and 5 experiments

    Energy Technology Data Exchange (ETDEWEB)

    Andre, B.; Ducros, G.; Tourasse, M.; Ferroud-Plattet, M.P. [CEA Centre d`Etudes de Grenoble, 38 (France). Dept. de Thermohydraulique et de Physique; Boulaud, D. [CEA Centre d`Etudes de Fontenay-aux-Roses, 92 (France). Inst. de Protection et de Surete Nucleaire

    1996-12-31

    Because of the severe consequences, in terms of radiological and biological effects, of a nuclear accident, the international reactor safety authorities initiated, 25 years ago, numerous experimental programs in order to improve the understanding and the prediction of these situations. In France, the Nuclear Protection and Safety Institute (IPSN) in collaboration with Electricite de France (EDF) co-fund the Heva-Vercors program, since 1983. The experiments are conducted in a shielded hot cell of the LAMA facility at Grenoble. The test specimen is a fuel rod section taken from a power reactor operated by EDF and includes three irradiated pellets in their original cladding. The fuel sample is re-irradiated at low power in the Siloe experimental reactor for seven days in order to recreate the short-lived fission products without inducing any in-pile release. Since the experimental sequence is performed less than 40 hours after the end of the reirradiation, direct measurement of radioactive fission products release is possible using gamma spectrometry. The measurements performed during the tests are essentially aimed at characterising the release kinetics and the total release of fission products and structural materials as a function of fuel temperature and oxidising/reducing conditions of the environment. The four last tests (Vercors 3 to Vercors 6), performed at 2600 K, allowed to measure the kinetic of high and low volatile species release, as well as the total released fraction of non volatile species and the transuranic elements. This paper is devoted to the comparison of the Vercors 4 and Vercors 5 tests. The first one has been conducted up to 2600 K under reducing conditions (hydrogen fluid), after an oxidising period at 1670 K. The second one was performed in a pure steam atmosphere after several plateaus at intermediate temperatures in oxidising conditions. The total release of volatile (Sb, Te, I, Cs) is not significantly modified and a higher release of Mo

  4. Experiments on Nitrogen Oxide Production of Droplet Arrays Burning under Microgravity Conditions

    Science.gov (United States)

    Moesl, Klaus; Sattelmayer, Thomas; Kikuchi, Masao; Yamamoto, Shin; Yoda, Shinichi

    The optimization of the combustion process is top priority in current aero-engine and aircraft development, particularly from the perspectives of high efficiency, minimized fuel consumption, and a sustainable exhaust gas production. Aero-engines are exclusively liquid-fueled with a strong correlation between the combustion temperature and the emissions of nitric oxide (NOX ). Due to safety concerns, the progress in NOX reduction has been much slower than in stationary gas turbines. In the past, the mixing intensity in the primary zone of aero-engine combustors was improved and air staging implemented. An important question for future aero-engine combustors, consequently, is how partial vaporization influences the NOX emissions of spray flames? In order to address this question, the combustion of partially vaporized, linear droplet arrays was studied experimentally under microgravity conditions. The influence of fuel pre-vaporization on the NOX emissions was assessed in a wide range. The experiments were performed in a drop tower and a sounding rocket campaign. The microgravity environment provided ideal experiment conditions without the disturbing ef-fect of natural convection. This allowed the study of the interacting phenomena of multi-phase flow, thermodynamics, and chemical kinetics. This way the understanding of the physical and chemical processes related to droplet and spray combustion could be improved. The Bremen drop tower (ZARM) was utilized for the precursor campaign in July 2008, which was com-prised of 30 drops. The sounding rocket experiments, which totaled a microgravity duration of 6 minutes, were finally performed on the flight of TEXUS-46 in November 2009. On both campaigns the "Japanese Combustion Module" (JCM) was used. It is a cooperative experi-ment on droplet array combustion between the Japan Aerospace Exploration Agency (JAXA) and ESA's (European Space Agency) research team, working on the combustion properties of partially premixed sprays

  5. Gel Generator Technology Viability for Small Scale Production - Indian Experience [Country report: India - GEL Gen.

    International Nuclear Information System (INIS)

    Sarkar, S.K.; Kothalkar, C.; Naskar, P.; Sneha, P.; Saraswathy, P.; Dey, A.C.; Venkatesh, Meera

    2015-01-01

    of the process. After successful completion of feasibility studies and small scale production and supply of gel generators to local hospitals, development of technology for regular production and supply was undertaken. A multidisciplinary core team comprising of chemists and engineers working in close collaboration enabled successful completion of the project. The technology development entailed four major aspects: (i) adaptation of chemical process to automation, (ii) design and erection of a production facility with adequate shielding, (iii) design/fabrication/installation of operation specific gadgets, and (iv) design of a compact, portable, easy to assemble and reusable generator assembly. The production facility, having a capacity to produce up to 25 generators per batch in an 8 hour shift operation, has been operational since the past five years. We report here the salient aspects of technology development and operational experience of producing the gel generators thereby demonstrating the viability of the technology

  6. Construction of Rb charge exchange cell and characteristic experiment for He- ion production

    International Nuclear Information System (INIS)

    Lee, Hee Seock; Bak, Jun Gyo; Bak, Hae Ill

    1991-01-01

    The Rb charge exchange cell is constructed as the He - ion source of the SNU 1.5-MV Tandem Van de Graaff accelerator. the characteristic experiments is carried out in order to determine the optimum operational conditions of the cell. The He + ion beam with the energy of 1 - 10 keV, extracted from the duoplasmatron ion source, is passed through the Rb vapor to become He - ions by the two step charge exchange reaction, i.e., He + + Rb → He o* + Rb + and He o* + Rb → He - + Rb + . From the experimental results, it is found that the maximum fractional yield of He - ions is produced at He + /ion energy of 7 keV. The optimum temperatures of the oven and the canal are determined to be 370 deg C and 95 deg C respectively. Under the optimum operational condition the maximum fractional yield of He - ions is 2.42 ± 0.02 5. This charge exchange cell is proved to be an effective system for the production of He - ions. (Author)

  7. Fission-product chemistry in severe reactor accidents: Review of relevant integral experiments

    International Nuclear Information System (INIS)

    Nichols, A.L.; Hueber, C.

    1992-01-01

    The attenuation of the radioactive fission-product emission from a severe reactor accident will depend on a combination of chemical, physical and thermal-hydraulic effects. Chemical species stabilised under the prevailing conditions will determine the extent of aerosol formation and any subsequent interaction, so defining the magnitude and physical forms of the eventual release into the environment. While several important integral tests have taken place in recent years, these experiments have tended to focus on the generation of mass-balance and aerosol-related data to test and validate materials-transport codes rather than study the impact of important chemical phenomena. This emphasis on thermal hydraulics, fuel behaviour and aerosol properties has occurred in many test (e.g. PBF, DEMONA, Marviken-V, LACE and ACE). Nevertheless, the generation and reaction of the chemical species in all of these programmes determined the transport properties of the resulting vapours and aerosols. Chemical effects have been studied in measurements somewhat subsidiary to the main aims of the tests. This work has been reviewed in detail with respect to Marviken-V, LACE, ACE and Falcon. Specific issues remain to be addressed, and these are discussed in terms of the proposed Phebus-FB programme. (author). 58 refs, 9 figs, 1 tab

  8. Sensitivity analysis for CORSOR models simulating fission product release in LOFT-LP-FP-2 severe accident experiment

    Energy Technology Data Exchange (ETDEWEB)

    Hoseyni, Seyed Mohsen [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Dept. of Basic Sciences; Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Young Researchers and Elite Club; Pourgol-Mohammad, Mohammad [Sahand Univ. of Technology, Tabriz (Iran, Islamic Republic of). Dept. of Mechanical Engineering; Yousefpour, Faramarz [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of)

    2017-03-15

    This paper deals with simulation, sensitivity and uncertainty analysis of LP-FP-2 experiment of LOFT test facility. The test facility simulates the major components and system response of a pressurized water reactor during a LOCA. MELCOR code is used for predicting the fission product release from the core fuel elements in LOFT LP-FP-2 experiment. Moreover, sensitivity and uncertainty analysis is performed for different CORSOR models simulating release of fission products in severe accident calculations for nuclear power plants. The calculated values for the fission product release are compared under different modeling options to the experimental data available from the experiment. In conclusion, the performance of 8 CORSOR modeling options is assessed for available modeling alternatives in the code structure.

  9. Fission product release from nuclear fuel II. Validation of ASTEC/ELSA on analytical and large scale experiments

    International Nuclear Information System (INIS)

    Brillant, G.; Marchetto, C.; Plumecocq, W.

    2013-01-01

    Highlights: • A wide range of experiments is presented for the ASTEC/ELSA code validation. • Analytical tests such as AECL, ORNL and VERCORS are considered. • A large-scale experiment, PHEBUS FPT1, is considered. • The good agreement with measurements shows the efficiency of the ASTEC modelling. • Improvements concern the FP release modelling from MOX and high burn-up UO 2 fuels. - Abstract: This article is the second of two articles dedicated to the mechanisms of fission product release from a degraded core. The models of fission product release from nuclear fuel in the ASTEC code have been described in detail in the first part of this work (Brillant et al., this issue). In this contribution, the validation of ELSA, the module of ASTEC that deals with fission product and structural material release from a degraded core, is presented. A large range of experimental tests, with various temperature and conditions for the fuel surrounding atmosphere (oxidising and reducing), is thus simulated with the ASTEC code. The validation database includes several analytical experiments with both bare fuel (e.g. MCE1 experiments) and cladded fuel (e.g. HCE3, VERCORS). Furthermore, the PHEBUS large-scale experiments are used for the validation of ASTEC. The rather satisfactory comparison between ELSA calculations and experimental measurements demonstrates the efficiency of the analytical models to describe fission product release in severe accident conditions

  10. The Effects of Shopping Orientations, Consumer Innovativeness, Purchase Experience, and Gender on Intention to Shop for Fashion Products Online

    Directory of Open Access Journals (Sweden)

    Ratih Puspa Nirmala

    2011-02-01

    Full Text Available Nowadays, many fashion retailers or marketers use the power of internet to promote and sell their products. This research examines the effects of consumers’ shopping orientations (brand/fashion consciousness, shopping enjoyment, price consciousness, convenience/time consciousness, shopping confidence, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender on consumers’ intention to shop for fashion products online. Data were collected through online surveys from the population of internet users in Indonesia, aged between 15 and 30 years old (generation Y, who had bought or browsed fashion products through the internet (N=210. This research is a quantitative research which uses purposive sampling and multiple regression analysis. Results show that the effects of several shopping orientations (shopping enjoyment, price consciousness, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender, are significant on consumers’ intention to shop for fashion products online. Furthermore, gender is marginally significant related to consumers’ intention to shop for fashion products online. Surprisingly, women tend to have lower intentions to shop for fashion products online compared to men.

  11. Integrating Project Management, Product Design with Industry Sponsored Projects provides Stimulating Senior Capstone Experiences

    Directory of Open Access Journals (Sweden)

    Phillip A. Sanger

    2011-07-01

    Full Text Available

    Abstract ¾ Many students are uncomfortable with real world engineering problems where needs and requirements must be concretely defined and the selection of design solutions is not black and white. This paper describes a two semester, multi-disciplinary senior capstone project for students from three Engineering and Technology Department programs (electrical engineering, electrical and computer engineering technology, and engineering technology that brings together the tools of project management and the creative product development process into industry sponsored projects.  The projects are fully integrated with the Center for Rapid Product Realization with its dual goals of economic development and enhanced learning.  The stage/gate development process is used with six formal reviews covering the development of the proposal through to the fabrication and testing of the project’s output.  Over the past four years thirty five (35 projects have been undertaken with students getting an exciting

  12. The impact of product experience, product involvement and verbal processing style on consumers' cognitive structure with regard to fresh fish

    DEFF Research Database (Denmark)

    Sørensen, Elin; Grunert, Klaus G.; Nielsen, Niels Asger

    1996-01-01

    central cognitive categories like values. A means-end chain consists of concrete product attributes, abstract product attributes, functional consequences, psychosocial consequences, instrumental values, a terminal values. 2) The most common method of measuring means-end chains has been the laddering...... interview technique. Laddering is a semi-qualitative technique which is open for the respondent's own answers without flooding the interviewer with data, as do other qualitative techniques. The results from the laddering interviews are coded and usually presented in a so-called hierarchical value map. 3...... were interviewed. Respondents were asked to rank four meat types, ie, (1) a fresh, whole, gutted plaice, (2) a package of frozen fish fillets, (3) a whole, frozen chicken, and (4) a package of fresh pork chops, according to how likely it would be that they would use them for a hot meal on a work...

  13. A long summer of festivals. Experience categories and productive cultures in the Spanish music industry

    Directory of Open Access Journals (Sweden)

    Dr. Héctor Fouce; hfoucero@ccinf.ucm.es

    2009-01-01

    Full Text Available A rigorous analysis of the music industry dynamics cannot take for granted the idea that there is a crisis in music: under that label there is simply a new set of production cultures and consumption. We are in the middle of a change from a cultural industry based on the object (the disc, the CD to an economy grounded on experience (Pine and Gilmore, 2000. In order to exemplify it, I will pay special attention to live music case. On the other hand, there is a surprising height of music festivals by all over Spain. Each city of the country tries to find its own place in the summer map by offering different music styles, such as: hip-hop, folk or rock. This article examines the new public categories, like international tourists or families with children, who join the festivals modifying their organization; the financing and the contents.Un análisis riguroso de las dinámicas de la industria musical no puede dar por sentado la idea de que hay una crisis en la música: bajo esa etiqueta hay simplemente un nuevo conjunto de culturas de producción y consumo. Estamos en pleno giro desde una industria cultural basada en el objeto (el disco, el CD hasta una economía de la experiencia (Pine y Gilmore, 2000. Para ejemplificarlo me centraré en el caso de la música en directo. Hay un sorprendente auge de los festivales musicales por toda España. Del hiphop al folk o al rock, cada ciudad del país intenta situarse en el mapa del verano ofreciendo un festival. El artículo revisa nuevas categorías de público, como los turistas internacionales o las familias con hijos, que se incorporan a los festivales modificando su organización, su financiación y sus contenidos.

  14. Eliciting preferences for waterpipe tobacco smoking using a discrete choice experiment: implications for product regulation.

    Science.gov (United States)

    Salloum, Ramzi G; Maziak, Wasim; Hammond, David; Nakkash, Rima; Islam, Farahnaz; Cheng, Xi; Thrasher, James F

    2015-09-09

    Waterpipe smoking is highly prevalent among university students, and has been increasing in popularity despite mounting evidence showing it is harmful to health. The aim of this study was to measure preferences for waterpipe smoking and determine which product characteristics are most important to smokers. A large university in the Southeastern USA. Adult waterpipe smokers attending the university (N=367). Participants completed an Internet-based discrete choice experiment to reveal their preferences for, and trade-offs between, the attributes of hypothetical waterpipe smoking sessions. Participants were presented with waterpipe lounge menus, each with three fruit-flavoured options and one tobacco flavoured option, in addition to an opt out option. Nicotine content and price were provided for each choice. Participants were randomised to either receive menus with a text-only health-warning message or no message. Multinomial and nested logit models were used to estimate the impact on consumer choice of attributes and between-subject assignment of health warnings respectively. On average, participants preferred fruit-flavoured varieties to tobacco flavour. They were averse to options labelled with higher nicotine content. Females and non-smokers of cigarettes were more likely than their counterparts to prefer flavoured and nicotine-free varieties. Participants exposed to a health warning were more likely to opt out. Fruit-flavoured tobacco and lower nicotine content labels, two strategies widely used by the industry, increase the demand for waterpipe smoking among young adults. Waterpipe-specific regulation should limit the availability of flavoured waterpipe tobacco and require accurate labelling of constituents. Waterpipe-specific tobacco control regulation, along with research to inform policy, is required to curb this emerging public health threat. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence

  15. Interactive Effects of Environmental Experience and Innovative Cognitive Style on Student Creativity in Product Design

    Science.gov (United States)

    Lu, Chia-Chen

    2017-01-01

    Environmental experience can enhance the ideas of design students. Thus, this type of experience may interfere with the influence of design students' cognitive style on creativity. The aim of this study was to examine the influence of environmental experience on the relationship between innovative cognitive style and industrial design students'…

  16. Planning of the evaluation of cleaner production experiences in the CEPITA companies

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1998-01-01

    The report describes the theoretical and methodological background for the evaluation in 1998 of the cleaner production implementation in a nu,mber of Tanzanian companies taking part in a DANIDA financed cleaner production develeopment project in 1994-95......The report describes the theoretical and methodological background for the evaluation in 1998 of the cleaner production implementation in a nu,mber of Tanzanian companies taking part in a DANIDA financed cleaner production develeopment project in 1994-95...

  17. Beyond surprise : A longitudinal study on the experience of visual-tactual incongruities in products

    NARCIS (Netherlands)

    Ludden, G.D.S.; Schifferstein, H.N.J.; Hekkert, P.

    2012-01-01

    When people encounter products with visual-tactual incongruities, they are likely to be surprised because the product feels different than expected. In this paper, we investigate (1) the relationship between surprise and the overall liking of the products, (2) the emotions associated with surprise,

  18. Associative Production of $\\phi$ Mesons and Neutral Kaons in the EXCHARM Experiment

    CERN Document Server

    Aleev, A N; Balandin, V P; Balev, S; Bulekov, O I; Emelianov, D D; Eremin, S V; Geshkov, I M; Goudzovski, E A; Ivanchenko, I M; Kapishin, M N; Kekelidze, V D; Kosarev, I G; Kozhenkova, Z I; Kuzmin, N A; Kvatadze, R A; Ljubimov, A L; Loktionov, A A; Madigozhin, D T; Mazny, V G; Mestvirishvili, A S; Mitsyn, V V; Molokanova, N A; Morozov, A N; Pismenyj, R E; Polansky, A; Polenkevich, I A; Ponosov, A K; Potrebenikov, Yu K; Sergeev, F M; Shkarovsky, S N; Slepets, L A; Spaskov, V N; Zinchenko, A I

    2005-01-01

    Associative $\\phi$-meson and neutral kaon production has been investigated in neutron--carbon interactions with the EXCHARM spectrometer at the Serpukhov accelerator. The cross section of inclusive associative $\\phi$ and $K^0/\\bar{K^0}$ production has been defined. The fraction of processes, permitted by Okubo--Zweig--Iizuka rule, was estimated in reactions with $\\phi$-meson production.

  19. Assessing stakeholder's experience and sensitivity on key issues for the economic growth of organic aquaculture production

    DEFF Research Database (Denmark)

    Lembo, Giuseppe; Jokumsen, Alfred; Spedicato, Maria Teresa

    2018-01-01

    expressed by the participants revealed both competence and awareness, despite the complexity of the subject. Several ideas and useful suggestions emerged regarding unresolved technical issues. In addition, the need for a targeted communication strategy on the quality of organic aquaculture products...... and the necessity of fostering European/national programs to support the production and marketing of organic aquaculture products were highlighted...

  20. Illustrating Environmental Issues by Using the Production-Possibility Frontier: A Classroom Experiment

    Science.gov (United States)

    Carson, Nancy; Tsigaris, Panagiotis

    2011-01-01

    The authors develop a new classroom experimental game to illustrate environmental issues by using the production-possibility frontier in an introductory economics course. Waste evolves as a byproduct of the production of widgets. Environmental cleanup is produced by reallocating scarce resources away from the production of the dirty good. In…

  1. Computation for LHC experiments: a worldwide computing grid; Le calcul scientifique des experiences LHC: une grille de production mondiale

    Energy Technology Data Exchange (ETDEWEB)

    Fairouz, Malek [Universite Joseph-Fourier, LPSC, CNRS-IN2P3, Grenoble I, 38 (France)

    2010-08-15

    In normal operating conditions the LHC detectors are expected to record about 10{sup 10} collisions each year. The processing of all the consequent experimental data is a real computing challenge in terms of equipment, software and organization: it requires sustaining data flows of a few 10{sup 9} octets per second and recording capacity of a few tens of 10{sup 15} octets each year. In order to meet this challenge a computing network implying the dispatch and share of tasks, has been set. The W-LCG grid (World wide LHC computing grid) is made up of 4 tiers. Tiers 0 is the computer center in CERN, it is responsible for collecting and recording the raw data from the LHC detectors and to dispatch it to the 11 tiers 1. The tiers 1 is typically a national center, it is responsible for making a copy of the raw data and for processing it in order to recover relevant data with a physical meaning and to transfer the results to the 150 tiers 2. The tiers 2 is at the level of the Institute or laboratory, it is in charge of the final analysis of the data and of the production of the simulations. Tiers 3 are at the level of the laboratories, they provide a complementary and local resource to tiers 2 in terms of data analysis. (A.C.)

  2. Simulation of top quark production for the ATLAS experiment at sqrt(s) = 13 TeV

    CERN Document Server

    The ATLAS collaboration

    2016-01-01

    This note summarises the Monte Carlo simulation setup for the pair and single production of top quarks for the ATLAS experiment at the LHC for sqrt(s)=13 TeV. In addition to the settings available and recommended for analyses using the 2015 dataset, the anticipated setup for 2016 analysis is also discussed.

  3. Production of charcoal briquettes from cotton stalk in malawi: methodology for feasibility studies using experiences in Sudan

    NARCIS (Netherlands)

    Onaji, P.B.; Siemons, R.V.

    1993-01-01

    The feasibility of charcoal production from cotton stalks in Malawi was studied based on experience from Sudan. The country relies considerably on biomass fuels. Of the total energy consumption in Malawi of 2.376 MTOE in 1989, 92% was met by biomass (fuelwood: 83.6% and charcoal: 8.3% Petroleum

  4. Liposomal Drug Product Development and Quality: Current US Experience and Perspective.

    Science.gov (United States)

    Kapoor, Mamta; Lee, Sau L; Tyner, Katherine M

    2017-05-01

    Research in the area of liposomes has grown substantially in the past few decades. Liposomes are lipid bilayer structures that can incorporate drug substances to modify the drug's pharmacokinetic profile thereby improving drug delivery. The agency has received over 400 liposomal drug product submissions (excluding combination therapies), and there are currently eight approved liposomal drug products on the US market. In order to identify the pain points in development and manufacturing of liposomal drug products, a retrospective analysis was performed from a quality perspective on submissions for new and generic liposomal drug products. General analysis on liposomal drug product submissions was also performed. Results indicated that 96% of the submissions were Investigational New Drug (IND) applications, 3% were New Drug Applications (NDAs), and the remaining 1% was Abbreviated New Drug Applications (ANDAs). Doxorubicin hydrochloride was the most commonly used drug substance incorporated into the liposomes (31%). The majority of the liposomal products were administered via intravenous route (84%) with cancer (various types) being the most common indication (63%). From a quality perspective, major challenges during the development of liposomal drug products included identification and (appropriate) characterization of critical quality attributes of liposomal drug products and suitable control strategies during product development. By focusing on these areas, a faster and more efficient development of liposomal drug products may be achieved. Additionally, in this way, the drug review process for such products can be streamlined.

  5. Development of a buffer gas trap for the confinement of positrons and study of positronium production in the GBAR experiment

    CERN Document Server

    AUTHOR|(CDS)2101248; van der Werf, Dirk

    The GBAR experiment relies on the production of antihydrogen positive ions to achieve its goal of measuring the gravitational acceleration of antimatter at rest. The ANTION project, included in the GBAR enterprise, is responsible for the production of these antimatter ions. Moreover, it also aims to measure the cross section of antihydrogen production throughout the collision of antiprotons and positronium atoms, as well as the matter cross sections of hydrogen and the hydrogen negative ion. These experiments imply the formation of a very dense positronium cloud, thus a large amount of positrons will be implanted on a positron/positronium converter material. This thesis reports the construction of a three stage buffer gas trap with the goal of trapping and accumulating positrons for the ANTION project. The combination of the Penning-type trap with a LINAC source constitutes a unique experimental setup. The trap was commissioned and optimized and is now fully operational. Trapping protocols were studied and...

  6. Consumer information or direct product experience? Alternative information policies and their effects on consumer acceptance of GM foods

    DEFF Research Database (Denmark)

    Scholderer, Joachim

    an informed purchase decision. Unfortunately, things are not that simple. Previous research has shown that Europeans already hold firm negative attitudes to GM foods. These attitudes are not based on risk-benefit evaluations of particular products. Rather, they seem to be a function of consumers? general......) consumers can be given the opportunity to evaluate GM products on the basis of direct experience, i.e. after the products have been launched. The first approach represents the transparency/precaution policy that was actually adopted in Europe, whilst the second one was dismissed after confrontations arose...... between different stakeholder groups in connection with Nestle's "Butterfinger" launch in 1998. Both approaches would have to compete against a strong network of pre-existing consumer attitudes, but surprisingly, neither of them has ever been experimentally tested on a broad scale. Two experiments...

  7. Measurement of the charge asymmetry in top-antitop quark production with the CDF II experiment

    Energy Technology Data Exchange (ETDEWEB)

    Weinelt, Julia; /Karlsruhe U., EKP

    2006-12-01

    The Fermi National Laboratory (Fermilab) operates the Tevatron proton-antiproton collider at a center-of-mass energy of {radical}s = 1.96 TeV, the is therefore the only collider which is today able to produce the heaviest known particle, the top quark. The top quark was discovered at the Tevatron by the CDF and D0 collaborations in 1995. At the Tevatron, most top quarks are produced via the strong interaction, whereby quark-antiquark annihilation dominates with 85%, and gluon fusion contributes with 15%. Considering next-to-leading order (NLO) contributions in the cross section of top-antitop quark production, leads to a slight positive asymmetry in the differential distribution of the production angle {alpha} of the top quarks. This asymmetry is due to the interference of certain NLO contributions. The charge asymmetry A in the cosine of {alpha} is predicted [14] to amount to 4-6%. Information about the partonic rest frame, necessary for a measurement of A in the observable cos {alpha}, is not accessible in the experiment. Thus, they use the rapidity difference of the top and the antitop quark as sensitive variable. This quantity offers the advantage of Lorentz invariance and is uniquely correlated with the cosine of {alpha}, justifying the choice of the rapidity difference to describe the behavior of cos {alpha}. In preparation for a measurement of the charge asymmetry, they conduct several Monte Carlo based studies concerning the effect of different event selection criteria on the asymmetry in the selected event samples. They observe a strong dependence of the measured asymmetry on the number of required jets in the particular event sample. This motivates further studies to understand the influence of additional gluon radiation, which leads to more than four observed jets in an event, on the rapidity distribution of the produced top quarks. They find, that events containing hard gluon radiation are correlated with a strong negative shift of the rapidity

  8. LANL sunnyside experiment: Study of neutron production in accelerator-driven targets

    International Nuclear Information System (INIS)

    Morgan, G.; Butler, G.; Cappiello, M.; Carius, S.; Daemen, L.; DeVolder, B.; Frehaut, J.; Goulding, C.; Grace, R.; Green, R.; Lisowski, P.; Littleton, P.; King, J.; King, N.; Prael, R.; Stratton, T.; Turner, S.; Ullmann, J.; Venneri, F.; Yates, M.

    1995-01-01

    Measurements have been made of the neutron production in prototypic targets for accelerator driven systems. Studies were conducted on four target assemblies containing lead, lithium, tungsten, and a thorium-salt mixture. Integral data on total neutron production were obtained as well as more differential data on neutron leakage and neutron flux profiles in the blanket/moderator region. Data analysis on total neutron production is complete and shows excellent agreement with calculations using the LAHET/MCNP code system

  9. Toxicity and Treatment of Pharmaceutical and Personal Care Products Using Exotic Plants - A Laboratory Scale Experiment

    DEFF Research Database (Denmark)

    Ramírez Vargas, Carlos Andrés; Paredes, Diego; Cubillos, Janneth

    Pharmaceuticals and personal care products (PPCPs) detected in the environment belong to a large and diverse group of organic substances (analgesics, antibiotics, anticonvulsants, soaps, lotions, toothpaste, etc.). PPCPs reach aquatic ecosystems through point and diffuse discharges (unused....../expired products, excretion of people and animals, application of fertilizers, direct delivery of veterinary products etc. Santos et al., 2010). Conventional technologies for water treatment (potable and sewage) fail to remove efficiently these compounds (Dordio et al., 2010), hence it is desirable to implement...

  10. LANL sunnyside experiment: Study of neutron production in accelerator-driven targets

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, G.; Butler, G.; Cappiello, M. [Los Alamos National Laboratory, NM (United States)] [and others

    1995-10-01

    Measurements have been made of the neutron production in prototypic targets for accelerator driven systems. Studies were conducted on four target assemblies containing lead, lithium, tungsten, and a thorium-salt mixture. Integral data on total neutron production were obtained as well as more differential data on neutron leakage and neutron flux profiles in the blanket/moderator region. Data analysis on total neutron production is complete and shows excellent agreement with calculations using the LAHET/MCNP code system.

  11. Comparison of spallation-model calculations with experiment on neutron production in uranium

    International Nuclear Information System (INIS)

    Kazaritskij, V.D.; Sibirtsev, A.A.; Stepanov, N.V.

    1988-01-01

    Calculated differential cross-sections for neutrons emitted from a thin uranium target due to 590 MeV protons are compared with experiment. The HETC, HAMLET, D2N2 and EVAP codes were applied. The HAMLET results are most consistent with experiment. 12 refs.; 3 figs

  12. Challenges in the design of smart product-service systems (PSSs) : Experiences from practitioners

    NARCIS (Netherlands)

    Valencia Cardona, A.M.; Mugge, R.; Schoormans, J.P.L.; Schifferstein, H.N.J.

    2014-01-01

    Smart Product-­?Service Systems (Smart PSSs) are market offerings that integrate products and services into one single solution through the implementation of IC technology. Smart PSSs allow organizations to develop relationships with consumers in new ways and have a growing presence in the

  13. New effects observed in central production by the WA102 experiment at the CERN Omega Spectrometer

    CERN Document Server

    Kirk, A

    2000-01-01

    A study of central meson production as a function of the difference in transverse momentum (dPT) of the exchanged particles shows that undisputed qqbar mesons are suppressed at small dPT whereas the glueball candidates are enhanced. In addition, the production cross section for different resonances depends strongly on the azimuthal angle between the two outgoing protons.

  14. Species Diversity Effects on Productivity, Persistence and Quality of Multispecies Swards in a Four-Year Experiment

    DEFF Research Database (Denmark)

    Jing, Jingying; Søegaard, Karen; Cong, Wen-Feng

    2017-01-01

    ), neutral detergent fiber (NDF) and crude protein (CP), and a lower concentration of ash than the 10-mix and 12-mix. Slurry application increased annual yield production by 10% and changed the botanical composition, increasing the proportion of grass and decreasing the proportion of legumes. Compared......Plant species diversity may benefit natural grassland productivity, but its effect in managed grassland systems is not well understood. A four-year multispecies grassland experiment was conducted to investigate the effect of species diversity±legumes and non-leguminous forbs±on productivity...... increased sward production and yield persistence under cutting regime. The 12-mix had the highest yield from the second year onwards and no statistically significant yield reduction over four years, while annual yields in the 3-mix and 10-mix decreased significantly with increasing grassland age. The higher...

  15. Experiences in radioisotope production in the German Democratic Republic with special reference to radiopharmaceuticals

    International Nuclear Information System (INIS)

    Muenze, R.

    1988-01-01

    Radioisotope production has been carried out in the German Democratic Republic for 30 years. Based on a 10 MW research reactor, a cyclotron and certain irradiation facilities at units of national nuclear power stations, a widespread assortment of radioisotopes is produced with emphasis to radiopharmaceuticals as the main materials. Domestic production covers the national demand in these products where the production is technologically feasible under our conditions. A complete supply of the users in the country (more than 7000 licences) is accomplished by an intense co-operation with neighbouring countries, including mutual assistance in reactor shut down periods and supply with special radioactive materials and products. International co-operation within the framework of the IAEA takes place, mainly as scientific and technological assistance to many developing countries. (author)

  16. Experiences from Implementation of Lean Production: Standardization versus Self-management: A Swedish Case Study

    Directory of Open Access Journals (Sweden)

    Margareta Oudhuis

    2013-01-01

    Full Text Available In this article, we discuss important aspects of the perceived problematic relationship between self-management and standardization. The article presents data from three case studies conducted within manufacturing companies in Sweden, where the popularity of lean production has led to a renaissance for short-cycle and standardized assembly work in settings that traditionally have made use of sociotechnical production design. The data suggest that the implementation has not contributed to an increased commitment, smooth operations, and capacity for change and innovation. Despite these not so positive results, it is argued that it is possible to combine self-management principles with lean production and standardization if 1 the implementation of lean is done with a contextual sensitivity, 2 a balance is reached between the use of standards on the one hand and work enrichment on the other, and 3 a feeling of ownership as regards both implementation and production process is upheld among the product on personnel.

  17. Characterization of Emissions from Building Products: Selection Criteria, Storage and Handling of Indoor Materials for Experiments

    DEFF Research Database (Denmark)

    Kjær, Ulla Dorte; Nielsen, Peter A.; Marcussen, Lis

    1996-01-01

    In research projects it is usually impossible to study more than a very limited aount of different products. Care and consideration must therefore be taken in the selection. The following criteria were used to select five products for chemical and sensory emission testing: The products should...... be indoor climate relevant, meaning that they should be in direct contact with indoor air when used in buildings, and their emission should contribute significantly to the indoor air concentrations for instance due to a large surface area. They should be representative in terms of being widely used, now...... that the emission mechanisms do not change as a consequence of physical processes or chemical reactions. The five products selected were PVC flooring, waterborne varnish on beechwood parquet, carpet, sealant, and waterborne paint on gypsum board. The products were brought to the laboratory immediately after...

  18. Primary, new and export production in the NW Pacific subarctic gyre during the vertigo K2 experiments

    Science.gov (United States)

    Elskens, M.; Brion, N.; Buesseler, K.; Van Mooy, B. A. S.; Boyd, P.; Dehairs, F.; Savoye, N.; Baeyens, W.

    2008-07-01

    This paper presents results on tracer experiments using 13C and 15N to estimate uptake rates of dissolved inorganic carbon (DIC) and nitrogen (DIN). Experiments were carried out at station K2 (47°N, 161°E) in the NW Pacific subarctic gyre during July-August 2005. Our goal was to investigate relationships between new and export production. New production was inferred from the tracer experiments using the f ratio concept (0-50 m); while export production was assessed with neutrally buoyant sediment traps (NBSTs) and the e ratio concept (at 150 m). During trap deployments, K2 was characterized both by changes in primary production (523-404 mg C m -2 d -1), new production (119-67 mg C m -2 d -1), export production (68-24 mg C m -2 d -1) and phytoplankton composition (high to low proportion of diatoms). The data indicate that 17-23% of primary production is exportable to deeper layers ( f ratio) but only 6-13% collected as a sinking particle flux at 150 m ( e ratio). Accordingly, >80% of the carbon fixed by phytoplankton would be mineralized in the upper 50 m (1- f), while <11% would be within 50-150 m ( f- e). DIN uptake flux amounted to 0.5 mM m -2 h -1, which was equivalent to about 95% particulate nitrogen (PN) remineralized and/or grazed within the upper 150 m. Most of the shallow PN remineralization occurred just above the depth of the deep chlorophyll maximum (DCM), where a net ammonium production was measured. Below the DCM, while nitrate uptake rates became negligible because of light limitation, ammonium uptake did continue to be significant. The uptake of ammonium by heterotrophic bacteria was estimated to be 14-17% of the DIN assimilation. Less clear are the consequences of this uptake on the phytoplankton community and biogeochemical processes, e.g. new production. It was suggested that competition for ammonium could select for small cells and may force large diatoms to use nitrate. This implies that under Fe stress as observed here, ammonium uptake is

  19. Investigation of the Feasibility of Utilizing Gamma Emission Computed Tomography in Evaluating Fission Product Migration in Irradiated TRISO Fuel Experiments

    International Nuclear Information System (INIS)

    Harp, Jason M.; Demkowicz, Paul A.

    2014-01-01

    In the High Temperature Gas-Cooled Reactor (HTGR) the TRISO particle fuel serves as the primary fission product containment. However the large number of TRISO particles present in proposed HTGRs dictates that there will be a small fraction (~10"-"4 to 10"-"5) of as manufactured defects and in-pile particle failures that will lead to some fission product release. The matrix material surrounding the TRISO particles in fuel compacts and the structural graphite holding the TRISO particles in place can also serve as sinks for containing any released fission products. However data on the migration of solid fission products through these materials is lacking. One of the primary goals of the AGR-3/4 experiment is to study fission product migration from intentionally failed TRISO particles in prototypic HTGR components such as structural graphite and compact matrix material. In this work, the potential for a Gamma Emission Computed Tomography (GECT) technique to non-destructively examine the fission product distribution in AGR-3/4 components and other irradiation experiments is explored. Specifically, the feasibility of using the Idaho National Laboratory (INL) Hot Fuels Examination Facility (HFEF) Precision Gamma Scanner (PGS) system for this GECT application was considered. Previous experience utilizing similar techniques, the expected activities in AGR-3/4 rings, and analysis of this work indicate using GECT to evaluate AGR-3/4 will be feasible. The GECT technique was also applied to other irradiated nuclear fuel systems currently available in the HFEF hot cell, including oxide fuel pins, metallic fuel pins, and monolithic plate fuel. Results indicate GECT with the HFEF PGS is effective. (author)

  20. Consumer preferences for sustainable aquaculture products: Evidence from in-depth interviews, think aloud protocols and choice experiments.

    Science.gov (United States)

    Risius, Antje; Janssen, Meike; Hamm, Ulrich

    2017-06-01

    Fish from aquaculture is becoming more important for human consumption. Sustainable aquaculture procedures were developed as an alternative to overcome the negative environmental impacts of conventional aquaculture procedures and wild fisheries. The objective of this contribution is to determine what consumers expect from sustainable aquaculture and whether they prefer sustainable aquaculture products. A combination of qualitative research methods, with think aloud protocols and in-depth interviews, as well as quantitative methods, using choice experiments and face-to-face interviews, was applied. Data was collected in three different cities of Germany. Results revealed that sustainable aquaculture was associated with natural, traditional, local, and small scale production systems with high animal welfare standards. Overall, participants paid a lot of attention to the declaration of origin; in particular fish products from Germany and Denmark were preferred along with local products. Frequently used sustainability claims for aquaculture products were mostly criticized as being imprecise by the participants of the qualitative study; even though two claims tested in the choice experiments had a significant positive impact on the choice of purchase. Similarly, existing aquaculture-specific labels for certified sustainable aquaculture had an impact on the buying decision, but were not well recognized and even less trusted. Overall, consumers had a positive attitude towards sustainable aquaculture. However, communication measures and labelling schemes should be improved to increase consumer acceptance and make a decisive impact on consumers' buying behavior. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Asymmetric responses of primary productivity to precipitation extremes: A synthesis of grassland precipitation manipulation experiments

    Czech Academy of Sciences Publication Activity Database

    Wilcox, K. R.; Shi, Z.; Gherardi, L. A.; Lemoine, N. P.; Koerner, S. E.; Hoover, D. L.; Bork, E.; Byrne, K. M.; Cahill, J.; Collins, S. L.; Evans, S.M.; Gilgen, Anna K.; Holub, Petr; Jiang, L.; Knapp, A. K.; LeCain, D.; Liang, J.; Garcia-Palacios, P.; Penuelas, J.; Pockman, W. T.; Smith, M. D.; Sun, S.; White, S. R.; Yahdjian, L.; Zhu, K.; Luo, Y.

    2017-01-01

    Roč. 23, č. 10 (2017), s. 4376-4385 ISSN 1354-1013 Institutional support: RVO:86652079 Keywords : net primary productivity * terrestrial ecosystems * temperate grassland * biomass allocation * plant-communities * tallgrass prairie * climate extremes * use efficiency * united-states * global-change * aboveground net primary productivity * belowground net primary productivity * biomass allocation * climate change * grasslands * meta-analysis * root biomass Subject RIV: EH - Ecology, Behaviour OBOR OECD: Environmental sciences (social aspects to be 5.7) Impact factor: 8.502, year: 2016

  2. Hadron production in nuclear collisions from the NA49 experiment at 158 GeV/c.A

    CERN Document Server

    Bächler, J; Barnby, L S; Bartke, Jerzy; Barton, R A; Betev, L; Bialkowska, H; Billmeier, A; Blume, C; Blyth, C O; Boimska, B; Bracinik, J; Brady, F P; Brun, R; Buncic, P; Carr, L; Cebra, D; Cooper, G E; Cramer, J G; Csató, P; Eckardt, V; Eckhardt, F; Ferenc, D; Fischer, H G; Fodor, Z; Foka, P Y; Freund, P; Friese, V; Ftácnik, J; Gál, J; Ganz, R E; Gazdzicki, M; Gladysz-Dziadus, E; Grebieszkow, J; Harris, J W; Hegyi, S; Hlinka, V; Höhne, C; Igo, G; Ivanov, M; Jacobs, P; Janik, R; Jones, P G; Kadija, K; Kolesnikov, V I; Kowalski, M; Lasiuk, B; Lednicky, R; Lévai, Peter; Malakhov, A I; Margetis, S; Markert, C; Mayes, B W; Melkumov, G L; Molnár, J; Nelson, J M; Odyniec, Grazyna Janina; Oldenburg, M; Pálla, G; Panagiotou, A D; Petridis, A; Pikna, M; Pinsky, L; Poskanzer, A M; Prindle, D J; Pühlhofer, F; Reid, J G; Renfordt, R E; Retyk, W; Ritter, H G; Röhrich, D; Roland, C; Roland, G; Rybicki, A; Sammer, T; Sandoval, A; Sann, H; Semenov, A Yu; Schäfer, E; Schmitz, N; Seyboth, P; Siklér, F; Sitár, B; Skrzypczak, E; Snellings, R; Squier, G T A; Stock, Reinhard; Strmen, P; Ströbele, H; Susa, T; Szarka, I; Szentpétery, I; Sziklai, J; Toy, M; Trainor, T A; Trentalange, S; Ullrich, T S; Varga, D; Vassiliou, Maria; Veres, G I; Vesztergombi, G; Voloshin, S A; Vranic, D; Wang, F; Weerasundara, D D; Wenig, S; Whitten, C; Xu, N; Yates, T A; Yoo, I K; Zimányi, J

    1999-01-01

    With its large acceptance and particle identification coverage the NA49 experiment can study hadron production in a wide range of high energy reactions. Originally aimed at examining central Pb+Pb collisions for signatures of quark-gluon plasma formation, the scope of the experiment has been enhanced with the systematic study of impact parameter and projectile size dependence, as well as the inclusion of the more elementary p+p and p+A interactions. The question is: are predicted signals of the quark-gluon plasma observed and are there discontinuities which would support the concept of hadronic phase transition?. (15 refs).

  3. Hadron production in nuclear collisions from the NA49 experiment at 158GeV/c · A

    International Nuclear Information System (INIS)

    Sikler, F.; Baechler, J.; Barna, D.; Barnby, L.S.; Bartke, J.; Barton, R.A.; Betev, L.; Bialkowska, H.; Billmeier, A.; Blume, C.; Blyth, C.O.; Boimska, B.; Bracinik, J.; Brady, F.P.; Brun, R.; Buncic, P.; Carr, L.; Cebra, D.; Cooper, G.E.; Cramer, J.G.; Csato, P.; Eckardt, V.; Eckhardt, F.; Ferenc, D.; Fischer, H.G.; Fodor, Z.; Foka, P.; Freund, P.; Friese, V.; Ftacnik, J.; Gal, J.; Ganz, R.; Gazdzicki, M.; Gladysz, E.; Grebieszkow, J.; Harris, J.W.; Hegyi, S.; Hlinka, V.; Hoehne, C.; Igo, G.; Ivanov, M.; Jacobs, P.; Janik, R.; Jones, P.G.; Kadija, K.; Kolesnikov, V.I.; Kowalski, M.; Lasiuk, B.; Lednicky, R.; Levai, P.; Malakhov, A.I.; Margetis, S.; Markert, C.; Mayes, B.W.; Melkumov, G.L.; Molnar, J.; Nelson, J.M.; Odyniec, G.; Oldenburg, M.D.; Palla, G.; Panagiotou, A.D.; Petridis, A.; Pikna, M.; Pinsky, L.; Poskanzer, A.M.; Prindle, D.J.; Puehlhofer, F.; Reid, J.G.; Renfordt, R.; Retyk, W.; Ritter, H.G.; Roehrich, D.; Roland, C.; Roland, G.; Rybicki, A.; Sammer, T.; Sandoval, A.; Sann, H.; Semenov, A.Yu.; Schaefer, E.; Schmitz, N.; Seyboth, P.; Sitar, B.; Skrzypczak, E.; Snellings, R.; Squier, G.T.A.; Stock, R.; Strmen, P.; Stroebele, H.; Susa, T.; Szarka, I.; Szentpetery, I.; Sziklai, J.; Toy, M.; Trainor, T.A.; Trentalange, S.; Ullrich, T.; Varga, D.; Vassiliou, M.; Veres, G.I.; Vesztergombi, G.; Voloshin, S.; Vranic, D.; Wang, F.; Weerasundara, D.D.; Wenig, S.; Whitten, C.; Xu, N.; Yates, T.A.; Yoo, I.K.; Zimanyi, J.

    1999-01-01

    With its large acceptance and particle identification coverage the NA49 experiment (Fig. 1) can study hadron production in a wide range of high energy reactions [1]. Originally aimed at examining central Pb+Pb collisions for signatures of quark-gluon plasma formation, the scope of the experiment has been enhanced with a systematic study of impact parameter and projectile size dependence, as well as the inclusion of the more elementary p+p and p+A interactions. The question is: are predicted signals of the quark-gluon plasma observed and are there discontinuities which would support the concept of hadronic phase transition?

  4. Improving food and agricultural production. Thailand. Fertilizer experiments - data analysis and interpretation of results

    International Nuclear Information System (INIS)

    Nelson, L.A.

    1991-01-01

    The emphasis of the mission was the provision of training to the staff of the Department of Agriculture, Government of Thailand, in the analysis and interpretation of data from experiments concerning fertilizer applications in agriculture

  5. Computer-assisted training experiment used in the field of thermal energy production (EDF)

    International Nuclear Information System (INIS)

    Felgines, R.

    1982-01-01

    In 1981, the EDF carried out an experiment with computer-assisted training (EAO). This new approach, which continued until June 1982, involved about 700 employees all of whom operated nuclear power stations. The different stages of this experiment and the lessons which can be drawn from it are given the lessons were of a positive nature and make it possible to envisage complete coverage of all nuclear power stations by computer-assisted training within a very short space of time [fr

  6. Building Integrated PV and PV/Hybrid Products - The PV:BONUS Experience: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, H.; Pierce, L. K.

    2001-10-01

    Presented at the 2001 NCPV Program Review Meeting: Successes and lessons learned from PV:BONUS (Building Opportunities in the United States in PV). This program has funded the development of PV or PV/hybrid products for building applications.

  7. Effects of language experience, use, and cognitive functioning on bilingual word production and comprehension

    NARCIS (Netherlands)

    Litcofsky, K.; Tanner, D.; Hell, A.G. van

    2016-01-01

    Aims and objectives/purpose/research questions: Considerable research has investigated how bilinguals produce and comprehend words, focusing mainly on how bilinguals are able to select words from the appropriate language. Less research, however, has investigated whether production and comprehension

  8. Diffractive open charm production at DESY HERA. Experiment versus two-gluon exchange model

    Energy Technology Data Exchange (ETDEWEB)

    Baranov, S.P. [P.N. Lebedev Inst. of Physics, Moscow (Russian Federation)

    2010-03-15

    Diffractive production of D{sup *} mesons at HERA conditions is considered in the framework of collinear two-gluon exchange model. Theoretical results are compared with recent experimental data. (orig.)

  9. Cash transfer programme, productive activities and labour supply: Evidence from randomized experiment in Kenya

    Science.gov (United States)

    Asfaw, Solomon; Davis, Benjamin; Dewbre, Josh; Handa, Sudhanshu; Winters, Paul

    2015-01-01

    This paper reports analysis of the impact of Kenya’s Cash Transfer for Orphans and Vulnerable Children Programme on the household decisions on productive activities using data from a randomized experimental design. Results show that the programme had a positive and significant impact on food consumption coming from home production, accumulation of productive assets, especially on the ownership of small livestock and on formation of nonfarm enterprise, especially for females. The programme has provided more flexibility to families in terms of labour allocation decisions, particularly for those who are geographically isolated. The programme was also found to have reduced child labour, an important objective of the programme. However we find very little impact of the programme on direct indicators of crop production. PMID:25663712

  10. Production of giant freshwater prawn postlarvae in penaeid prawn (shrimp) hatchery: An experience

    Digital Repository Service at National Institute of Oceanography (India)

    Achuthankutty, C.T.; Chatterji, A.; Sripada, R.A.; Desai, U.M.

    A pilot scale penaeid prawn (shrimp) hatchery was established at the National Institute of Oceanography, Goa, India in 1996 with an installed production capacity of 2 million postlarvae (PL 20) as part of the Technology Project in Mission Mode Semi...

  11. Study of particle production in hadron-nucleus interactions for neutrino experiments

    CERN Document Server

    Palczewski, Tomasz Jan

    The dissertation presents a study of hadron product ion in the NA61/SHINE large acceptance spectrometer at CERN SPS. The differential cross se ctions were obtained for the production of negatively charged pions, neutral Kaons, and Lam bdas from the proton-Carbon interactions at 31 GeV/c. Methods of particle yields extraction from proton Carbon interactions were developed. An analysis chain of global correction m ethod (h- method) was established for the thin carbon target and as well for T2K replica targ et and compared to the results obtained with full particle identification. The h- method permits to cover larger phase space region not otherwise accessible. In addition, a full chain of V 0 analysis was prepared to obtain neutral Kaon and Lambda results in polar angle and momentum variables (p, θ ). Results on the differential production cross sections and mean mul tiplicities in production processes for negatively charge...

  12. Experiences with the design and production of an industrial, flexible and demountable (IFD) building system

    NARCIS (Netherlands)

    Gassel, van F.J.M.; Stone, W.C.

    2002-01-01

    The Dutch government encourages innovative construction by subsidizing cohesive industrial, flexible and demountable building (lFD) pilot projects. Industrial building concerns the process-related aspects of production. robotization, mechanization, automation, prefabrication, communication, etc.

  13. Some in-reactor loop experiments on corrosion product transport and water chemistry

    International Nuclear Information System (INIS)

    Balakrishnan, P.V.; Allison, G.M.

    1978-01-01

    A study of the transport of activated corrosion products in the heat transport circuit of pressurized water-cooled nuclear reactors using an in-reactor loop showed that the concentration of particulate and dissolved corrosion products in the high-temperature water depends on such chemical parameters as pH and dissolved hydrogen concentration. Transients in these parameters, as well as in temperature, generally increase the concentration of suspended corrosion products. The maximum concentration of particles observed is much reduced when high-flow, high-temperature filtration is used. Filtration also reduces the steady-state concentration of particles. Dissolved corrosion products are mainly responsible for activity accumulation on surfaces. The data obtained from this study were used to estimate the rate constants for some of the transfer processes involved in the contamination of the primary heat transport circuit in water-cooled nuclear power reactors

  14. EXPERIMENT ON LONG-STORAGE OF FOOD PRODUCTS FOODSTUFFS IN CODITION OF PERMAFROST CONTINUED, ARCTIC, 2016

    Directory of Open Access Journals (Sweden)

    S. E. Ulanin

    2016-01-01

    Full Text Available In 1973 the crew of polar expedition, investigating the Middendorff Bay at the messdeck Zarya, discovered the depot of food products hidden in permafrost by head of Russian polar expedition E. Toll in 1900. There were oat flakes ‘Gerkules’ and croutons in the depot. Then the study carried out in Research Institute of Vegetable Drying and Can Industry had shown that all products discovered had preserved all their food qualities. That result leaded to launch up the experimental work on the possibility of preservation of food products and foodstuffs in permafrost till 2050. Quality of product found out in Taymyr Peninsula was analyzed. The results of study on qualities after long preservation in permafrost of such food products and foodstuffs as meat, milk, fish, confectionery, concentrated food, plant seeds were given. As a result of expedition in 2016, 20 samples were taken out and new samples of two types of products were placed into repository. Overall products placed consisted of 23 items, including foodstuffs and plant seeds with account of taking them out in 2025, 2035 and 2050. On the basis of research carried out, it is proved that most of modern and casual food products can be preserved without losing their quality values.

  15. Research networks and scientific production in Economics: The recent spanish experience (WP)

    OpenAIRE

    Duque, Juan Carlos; Ramos Lobo, Raúl; Royuela Mora, Vicente

    2007-01-01

    This paper studies Spanish scientific production in Economics from 1994 to 2004. It focuses on aspects that have received little attention in other bibliometric studies, such as the impact of research and the role of scientific collaborations in the publications produced by Spanish universities. Our results show that national research networks have played a fundamental role in the increase in Spanish scientific production in this discipline.

  16. Effects of social sustainability signals on neural valuation signals and taste-experience of food products

    Directory of Open Access Journals (Sweden)

    Laura eEnax

    2015-09-01

    Full Text Available Value-based decision making occurs when individuals choose between different alternatives and place a value on each alternative and its attributes. Marketing actions frequently manipulate product attributes, by adding e.g., health claims on the packaging. A previous imaging study found that an emblem for organic products increased willingness to pay (WTP and activity in the ventral striatum (VS. The current study investigated neural and behavioral processes underlying the influence of Fair Trade (FT labeling on food valuation and choice. Sustainability is an important product attribute for many consumers, with FT signals being one way to highlight ethically sustainable production. Forty participants valuated products in combination with an FT emblem or no emblem and stated their WTP in a bidding task while in an MRI scanner. After that, participants tasted – objectively identical – chocolates, presented either as FT or as conventionally produced. In the fMRI task, WTP was significantly higher for FT products. FT labeling increased activity in regions important for reward-processing and salience, that is, in the VS, anterior and posterior cingulate, as well as superior frontal gyrus. Subjective value, that is, WTP was correlated with activity in the ventromedial prefrontal cortex (vmPFC. We find that the anterior cingulate, VS and superior frontal gyrus exhibit task-related increases in functional connectivity to the vmPFC when an FT product was evaluated, suggesting a network which alters valuation processes. We also found a significant taste-placebo effect, with higher experienced taste pleasantness and intensity for FT labeled chocolates. Our results reveal a possible neural mechanism underlying valuation processes of certified food products. The results are important in light of understanding current marketing trends as well as designing future interventions that aim at positively influencing food choice.

  17. Measuring consumers' interest in instant fortified pearl millet products: a field experiment in Touba, Senegal.

    Science.gov (United States)

    De Groote, Hugo; Kariuki, Sarah W; Traore, Djibril; Taylor, John Rn; Ferruzzi, Mario G; Hamaker, Bruce R

    2018-04-01

    In Africa, food-processing industries are emerging fast, especially for cereals. New low-cost extrusion cookers give small enterprises an opportunity to enter the market for processed cereal products, in particular instant, fortified and flavoured mixes. Before engaging in the marketing of these products, consumers' interest needs to be assessed. This study used a combination of affective tests and experimental auctions with 200 consumers in Touba, Senegal, to evaluate four new products with conventional pearl millet flour as the control: instant pearl millet flour, instant pearl millet flour with added dry mango and carrot powder (naturally fortified), and the previous products with added conventional chemical micronutrient fortificants. During affective tests, consumers made little distinction between the five products in appearance, aroma, taste and overall appreciation. The experimental auctions showed that, without providing additional information on the products, there was no difference in 'willingness to pay' (WTP) between them. However, after that information is provided, consumers were willing to pay a modest premium for instant flour, and a large premium for added mango and carrot extract and for added micronutrients, but were not willing to pay a premium if those micronutrients came from natural sources. Income increased overall WTP, while education increased WTP for instant flour. There is a potential market in low-income African countries for instant and fortified cereal food products, but likely in the higher income and education groups. The increased cost needs to be compared to the premiums consumers are willing to pay. In the next step, the new and promising products could be tested in pilot markets, with target consumers. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  18. Part I. Fuel-motion diagnostics in support of fast-reactor safety experiments. Part II. Fission product detection system in support of fast reactor safety experiments

    International Nuclear Information System (INIS)

    Devolpi, A.; Doerner, R.C.; Fink, C.L.; Regis, J.P.; Rhodes, E.A.; Stanford, G.S.; Braid, T.H.; Boyar, R.E.

    1986-05-01

    In all destructive fast-reactor safety experiments at TREAT, fuel motion and cladding failure have been monitored by the fast-neutron/gamma-ray hodoscope, providing experimental results that are directly applicable to design, modeling, and validation in fast-reactor safety. Hodoscope contributions to the safety program can be considered to fall into several groupings: pre-failure fuel motion, cladding failure, post-failure fuel motion, steel blockages, pretest and posttest radiography, axial-power-profile variations, and power-coupling monitoring. High-quality results in fuel motion have been achieved, and motion sequences have been reconstructed in qualitative and quantitative visual forms. A collimated detection system has been used to observe fission products in the upper regions of a test loop in the TREAT reactor. Particular regions of the loop are targeted through any of five channels in a rotatable assembly in a horizontal hole through the biological shield. A well-type neutron detector, optimized for delayed neutrons, and two GeLi gamma ray spectrometers have been used in several experiments. Data are presented showing a time history of the transport of Dn emitters, of gamma spectra identifying volatile fission products deposited as aerosols, and of fission gas isotopes released from the coolant

  19. Exclusive vector meson production in pp collisions at the COMPASS experiment

    International Nuclear Information System (INIS)

    Bernhard, Johannes

    2014-01-01

    Mechanisms for particle production in proton-proton collisions at intermediate energies are studied within the COMPASS collaboration using the COMPASS spectrometer at the M2 beam line of the SPS at CERN. The possible production mechanisms are investigated using the production of the vector mesons ω and φ and include resonant diffractive excitation of the beam proton with a subsequent decay of the resonance, central production and the related ''shake-off'' mechanism. The data which were used for this thesis were collected in the years 2008 and 2009 with a 190 GeV/c proton beam impinging on a liquid hydrogen target that was surrounded by a recoil proton detector (RPD). The RPD is an integral part of the newly developed hadron trigger system for which in addition several new detectors have been build. The performances of both RPD and hadron trigger system are scrutinised and efficiency parameters are extracted. A method for reconstruction of recoil protons and for calibration is developed and described. The production of ω mesons is studied with the reaction pp → pωp, ω → π + π - π 0 and the production of φ mesons with the reaction pp → pφp, φ → K + K - for momentum transfers squared between 0.1 (GeV/c) 2 and 1 (GeV/c) 2 . The production ratio σ(pp → pφp)/σ(pp → pωp) is determined as a function of the longitudinal momentum fraction x F and compared to the OZI rule prediction. A significant violation of the OZI rule dependent on x F is found and discussed with respect to resonant structures in the pω mass spectrum. Removing the low pω/pφ mass region which includes these structures eliminates the x F dependence. In addition, the spin density matrix element ρ 00 , i.e. the spin alignment, for both ω and φ mesons is studied. One study is performed in the helicity frame that allows to discriminate resonant diffractive excitation. In a second study, a reference frame with respect to the direction of the momentum transfer

  20. Ocean Acidification Experiments in Large-Scale Mesocosms Reveal Similar Dynamics of Dissolved Organic Matter Production and Biotransformation

    Directory of Open Access Journals (Sweden)

    Maren Zark

    2017-09-01

    Full Text Available Dissolved organic matter (DOM represents a major reservoir of carbon in the oceans. Environmental stressors such as ocean acidification (OA potentially affect DOM production and degradation processes, e.g., phytoplankton exudation or microbial uptake and biotransformation of molecules. Resulting changes in carbon storage capacity of the ocean, thus, may cause feedbacks on the global carbon cycle. Previous experiments studying OA effects on the DOM pool under natural conditions, however, were mostly conducted in temperate and coastal eutrophic areas. Here, we report on OA effects on the existing and newly produced DOM pool during an experiment in the subtropical North Atlantic Ocean at the Canary Islands during an (1 oligotrophic phase and (2 after simulated deep water upwelling. The last is a frequently occurring event in this region controlling nutrient and phytoplankton dynamics. We manipulated nine large-scale mesocosms with a gradient of pCO2 ranging from ~350 up to ~1,030 μatm and monitored the DOM molecular composition using ultrahigh-resolution mass spectrometry via Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR-MS. An increase of 37 μmol L−1 DOC was observed in all mesocosms during a phytoplankton bloom induced by simulated upwelling. Indications for enhanced DOC accumulation under elevated CO2 became apparent during a phase of nutrient recycling toward the end of the experiment. The production of DOM was reflected in changes of the molecular DOM composition. Out of the 7,212 molecular formulae, which were detected throughout the experiment, ~50% correlated significantly in mass spectrometric signal intensity with cumulative bacterial protein production (BPP and are likely a product of microbial transformation. However, no differences in the produced compounds were found with respect to CO2 levels. Comparing the results of this experiment with a comparable OA experiment in the Swedish Gullmar Fjord, reveals

  1. Measurement of the Standard Model W+W- production cross-section using the ATLAS experiment on the LHC

    International Nuclear Information System (INIS)

    Zeman, Martin

    2014-01-01

    Measurements of di-boson production cross-sections are an important part of the physics programme at the CERN Large Hadron Collider. These physics analyses provide the opportunity to probe the electroweak sector of the Standard Model at the TeV scale and could also indicate the existence of new particles or probe beyond the Standard Model physics. The excellent performance of the LHC through years 2011 and 2012 allowed for very competitive measurements. This thesis provides a comprehensive overview of the experimental considerations and methods used in the measurement of the W + W - production cross-section in proton-proton collisions at √s = 7 TeV and 8 TeV. The treatise covers the material in great detail, starting with the introduction of the theoretical framework of the Standard Model and follows with an extensive discussion of the methods implemented in recording and reconstructing physics events in an experiment of this magnitude. The associated online and offline software tools are included in the discussion. The relevant experiments are covered, including a very detailed section about the ATLAS detector. The final chapter of this thesis contains a detailed description of the analysis of the W-pair production in the leptonic decay channels using the datasets recorded by the ATLAS experiment during 2011 and 2012 (Run I). The analyses use 4.60 fb -1 recorded at √s = 7 TeV and 20.28 fb -1 recorded at 8 TeV. The experimentally measured cross section for the production of W bosons at the ATLAS experiment is consistently enhanced compared to the predictions of the Standard Model at centre-of-mass energies of 7 TeV and 8 TeV. The thesis concludes with the presentation of differential cross-section measurement results. (author) [fr

  2. Developing historical food production and consumption data for 131I dose estimates: The Hanford experience

    International Nuclear Information System (INIS)

    Anderson, D.M.; Marsh, T.L.; Deonigi, D.A.

    1996-01-01

    This paper describes the methods used to reconstruct the movement of commercial foods in and through the study area of the Hanford Environmental Dose Reconstruction Project. The most dose-relevant radionuclide released from Hanford separations plants was 131 I via the atmospheric pathway. As a result of atmospheric deposition of 131 I, commercial food supplies may have been contaminated. Because of the half-life of 131 I is relatively short, foods consumed soon after production, such as milk and produce, presented the highest risk. For that reason, this paper deals primarily with the reconstruction of milk and produce production, marketing, and consumption from 1945-1951, the period with the highest known 131 I releases. The reconstructed food production and consumption information was used as input to radiation dose estimates for representative individuals and as default values for real individuals who may not remember where they obtained food or how much they consumed during that period. Specific methods for tracing the movement of commercial milk and produce back from the point of human consumption, through commercial markets, to original production are presented. Results include the characteristics of food consumption exhibited by representative individuals, examples of commercial milk and produce market structures, and a review of commercial milk production and processing practices from 1945-1951

  3. The Economic Impact of Labeled Regional Products: The Experience of the UNESCO Biosphere Reserve Entlebuch

    Directory of Open Access Journals (Sweden)

    Florian Knaus

    2017-02-01

    Full Text Available Protected area management bodies are increasingly required to address economic development alongside the original goal of conservation. This is especially true for United Nations Educational, Scientific and Cultural Organization (UNESCO biosphere reserves, which are expected to function as models for sustainable development. Economic development has been achieved in many places through nature-based tourism. Sale of products labeled as coming from protected areas is considered promising in this respect too, especially in Europe, but their economic impact has not been assessed so far. This study estimated the gross added value generated by labeled products from the UNESCO Biosphere Reserve Entlebuch—a rural, mountainous region in Switzerland. After a management-guided phase of building up credibility, identity, and innovations, labeled products generated a remarkable gross added value of US$ 5.8 million in 2014, 13 years after the product label was introduced. This corresponds to 4% of the jobs in agriculture and forestry and 1% of all jobs in the region. Given potential synergies with biodiversity, tourism, individual well-being, and other assets, labeled products can be true advantages for protected areas and their managers.

  4. Sustainable and Traditional Product Innovation without Scale and Experience, but Only for KIBS!

    Directory of Open Access Journals (Sweden)

    Esteban Lafuente

    2018-04-01

    Full Text Available This study analyzes the ideal strategic trajectory for sustainable and traditional product innovation. Using a sample of 74 Costa Rican high-performance businesses for 2016, we employ fuzzy set analysis (qualitative comparative analysis to evaluate how the development of sustainable and traditional product innovation strategies is conditioned by the business’ learning capabilities and entrepreneurial orientation in knowledge-intensive (KIBS and non-knowledge-intensive businesses. The results indicate two ideal strategic configurations of product innovation. The first strategic configuration to reach maximum product innovation requires the presence of KIBS firms that have both an entrepreneurial and learning orientation, while the second configuration is specific to non-KIBS firms with greater firm size and age along with entrepreneurial and learning orientation. KIBS firms are found to leverage the knowledge-based and customer orientations that characterize their business model in order to compensate for the shortage of important organizational characteristics—which we link to liabilities or smallness and newness—required to achieve optimal sustainable and traditional product innovation.

  5. Time Structure of Particle Production in the Merit High-Power Target Experiment

    CERN Document Server

    Efthymiopoulos, I; Palm, M; Lettry, J; Haug, F; Pereira, H; Pernegger, H; Steerenberg, R; Grudiev, A; Kirk, H G; Park, H; Tsang, T; Mokhov, N; Striganov, S; Carroll, A J; Graves, V B; Spampinato, P T; McDonald, K T; Bennett, J R J; Caretta, O; Loveridge, P

    2010-01-01

    The MERIT experiment is a proof-of-principle test of a target system for high power proton beam to be used as front-end for a neutrino factory complex or amuon collider. The experiment took data in autumn 2007 with the fast extracted beam from the CERN Proton Synchrotron (PS) to a maximum intensity of about 30 × 1012 protons per pulse. We report results from the portion of the MERIT experiment in which separated beam pulses were delivered to a free mercury jet target with time intervals between pulses varying from 2 to 700 μs. The analysis is based on the responses of particle detectors placed along side and downstream of the target.

  6. Experiences with preventive procedures application in the process of beer production in Czech Republic

    Directory of Open Access Journals (Sweden)

    Jana Kotovicová

    2011-01-01

    Full Text Available Food-processing industry is an intriguing field regarding prevention procedures application. All food-processing operations have common fundamental spheres of problems – wastewater polluted by organic substances, solid waste of biological origin and losses during source material processing. Beer production process is a representative of food-processing sphere. The brewing industry has an ancient tradition and is still a dynamic sector open to new developments in technology and scientific progress. A case study of beer production in Czech Republic has been performed. During the work on the project, there were utilized methodical procedures of Cleaner Production, best available technologies (BAT utilization and hazard analysis critical control points (HACCP, optimization of final technology operation.

  7. SRF Accelerator Technology Transfer Experience from the Achievement of the SNS Cryomodule Production Run

    CERN Document Server

    Hogan, John; Daly, Edward; Drury, Michael A; Fischer, John; Hiatt, Tommy; Kneisel, Peter; Mammosser, John; Preble, Joseph P; Whitlatch, Timothy; Wilson, Katherine; Wiseman, Mark

    2005-01-01

    This paper will discuss the technology transfer aspect of superconducting RF expertise, as it pertains to cryomodule production, beginning with the original design requirements through testing and concluding with product delivery to the end user. The success of future industrialization, of accelerator systems, is dependent upon a focused effort on accelerator technology transfer. Over the past twenty years the Thomas Jefferson National Accelerator Facility (Jefferson Lab) has worked with industry to successfully design, manufacture, test and commission more superconducting RF cryomodules than any other entity in the United States. The most recent accomplishment of Jefferson Lab has been the successful production of twenty-four cryomodules designed for the Spallation Neutron Source (SNS). Jefferson Lab was chosen, by the United States Department of Energy, to provide the superconducting portion of the SNS linac due to its reputation as a primary resource for SRF expertise. The successful partnering with, and d...

  8. Impact of heavy-flavour production cross sections measured by the LHCb experiment on parton distribution functions at low x

    Energy Technology Data Exchange (ETDEWEB)

    Zenaiev, O.; Geiser, A.; Lipka, K.; Bluemlein, J.; Kuprash, O.; Placakyte, R.; Starovoitov, P. [DESY Hamburg and Zeuthen, Hamburg (Germany); Cooper-Sarkar, A. [University of Oxford, Oxford (United Kingdom); Garzelli, M.V.; Moch, S.O. [Universitaet Hamburg, Hamburg (Germany); Guzzi, M. [The University of Manchester, School of Physics and Astronomy, Manchester (United Kingdom); Nadolsky, P. [Southern Methodist University, Dallas, TX (United States); Rabbertz, K. [Karlsruher Institut fuer Technologie, Karlsruhe (Germany); Schienbein, I. [LPSC Grenoble, Grenoble (France); Collaboration: PROSA Collaboration

    2015-08-15

    The impact of recent measurements of heavy-flavour production in deep inelastic ep scattering and in pp collisions on parton distribution functions is studied in a QCD analysis in the fixed-flavour number scheme at next-to-leading order. Differential cross sections of charm- and beauty-hadron production measured by LHCb are used together with inclusive and heavy-flavour production cross sections in deep inelastic scattering at HERA. The heavy-flavour data of the LHCb experiment impose additional constraints on the gluon and the sea-quark distributions at low partonic fractions x of the proton momentum, down to x ∝ 5 x 10{sup -6}. This kinematic range is currently not covered by other experimental data in perturbative QCD fits. (orig.)

  9. Impact of heavy-flavour production cross sections measured by the LHCb experiment on parton distribution functions at low x

    International Nuclear Information System (INIS)

    Zenaiev, O.; Geiser, A.; Lipka, K.

    2015-03-01

    The impact of recent measurements of heavy-flavour production in deep inelastic ep scattering and in pp collisions on parton distribution functions is studied in a QCD analysis in the fixed-flavour number scheme at next-to-leading order. Differential cross sections of charm- and beauty-hadron production measured by LHCb are used together with inclusive and heavy-flavour production cross sections in deep inelastic scattering at HERA. The heavy-flavour data of the LHCb experiment impose additional constraints on the gluon and the sea-quark distributions at low partonic fractions x of the proton momentum, down to x∝5 x 10 -6 . This kinematic range is currently not covered by other experimental data in perturbative QCD fits.

  10. Biogas Production from Thin Stillage on an Industrial Scale—Experience and Optimisation

    Directory of Open Access Journals (Sweden)

    Anna Schnürer

    2013-10-01

    Full Text Available With the increasing demand for renewable energy and sustainable waste treatment, biogas production is expanding. Approximately four billion litres of bio-ethanol are produced annually for vehicle fuel in Europe, resulting in the production of large amounts of stillage residues. This stillage is energy-rich and can be used for biogas production, but is a challenging substrate due to its high levels of nitrogen and sulphate. At the full-scale biogas production plant in Norrköping, Sweden (Svensk Biogas i Linköping AB, thin grain stillage is used as a biogas substrate. This paper describes the plant operation and strategies that have been implemented to digest thin stillage successfully. High ammonia concentrations in the digester have resulted in syntrophic acetate oxidation (SAO becoming the major pathway for acetate degradation. Therefore, a long hydraulic retention time (HRT (40–60 days is used to allow the syntrophic acetate-oxidising bacteria time to grow. The high sulphate levels in thin stillage result in high levels of hydrogen sulphide following degradation of protein and the activity of sulphate-reducing bacteria (SRB, the presence of which has been confirmed by quantitative polymerase chain reaction (qPCR analysis. To optimise biogas production and maintain a stable process, the substrate is diluted with tap water and co-digested with grain residues and glycerine to keep the ammonium nitrogen (NH4-N concentration below 6 g L−1. Combined addition of iron, hydrochloric acid and cobalt successfully precipitates sulphides, reduces ammonia toxicity and supplies microorganisms with trace element. Mesophilic temperature (38 °C is employed to further avoid ammonia toxicity. Together, these measures and doubling the digester volume have made it possible to increase annual biogas production from 27.7 TJ to 69.1 TJ.

  11. New effects observed in central production by experiment WA102 at the CERN Omega Spectrometer

    CERN Document Server

    Kirk, A

    2000-01-01

    A partial wave analysis of the centrally produced KK and pipi systems shows that the fJ(1710) has J = 0. In addition, a study of central meson production as a function of the difference in transverse momentum (dPT) of the exchanged particles shows that undisputed qqbar mesons are suppressed at small dPT whereas the glueball candidates are enhanced and that the production cross section for different resonances depends strongly on the azimuthal angle between the two outgoing protons.

  12. Unpacking Early Work Experiences of Young Adults With Rheumatic Disease: An Examination of Absenteeism, Job Disruptions, and Productivity Loss.

    Science.gov (United States)

    Jetha, Arif; Badley, Elizabeth; Beaton, Dorcas; Fortin, Paul R; Shiff, Natalie J; Gignac, Monique A M

    2015-09-01

    To examine work absenteeism, job disruptions, and perceived productivity loss and factors associated with each outcome in young adults living with systemic lupus erythematosus (SLE) and juvenile arthritis (JA). One hundred forty-three young adults, ages 18-30 years with SLE (54.5%) and JA (45.5%), completed an online survey of work experiences. Demographic, health (e.g., fatigue, disease activity), psychosocial (e.g., independence, social support), and work context (e.g., career satisfaction, job control, self-disclosure) information was collected. Participants were asked about absenteeism, job disruptions, and perceived productivity loss in the last 6 months. Log Poisson regression analyses examined factors associated with work outcomes. A majority of participants (59%) were employed and reported a well-managed health condition. Employed respondents were satisfied with their career progress and indicated moderate job control. More than 40% of participants reported absenteeism, job disruptions, and productivity loss. Greater job control and self-disclosure, and less social support, were related to a higher likelihood of absenteeism. More disease activity was related to a greater likelihood of reporting job disruptions. Lower fatigue and higher job control were associated with a reduced likelihood of a productivity loss. Young adult respondents with rheumatic disease experienced challenges with employment, including absenteeism, job disruptions, and productivity loss. While related to greater absenteeism, job control could play a role in a young person's ability to manage their health condition and sustain productive employment. Greater attention should also be paid to understanding health factors and social support in early work experiences. © 2015, American College of Rheumatology.

  13. Growth as Product and as Process: Student Learning Outcomes Attained through College Experiences in China

    Science.gov (United States)

    Cen, Yuhao

    2012-01-01

    Little empirical research has been done on student learning outcomes and college experiences in China, where the gross enrollment rate in higher education reached 26.5 percent and the undergraduate population exceeded 22 million in 2010. This study seeks to describe, explain, and interpret student learning as perceived from students in Chinese…

  14. Professional Training in Organic Food Production: A Cross-Country Experience

    Science.gov (United States)

    Guiné, Raquel; Costa, Daniela; Correia, Paula; Costa, Cristina; Correia, Helena; Castro, Moises; Guerra, Luis; Seeds, Catherine; Coll, Collette; Radics, Laszlo; Arslan, Meahmet; Soylu, Soner; Tothova, Monika; Toth, Peter; Basile, Salvatore

    2017-01-01

    Purpose: The purpose of this paper is to characterize the agricultural activities and past experiences in professional training in the context of mobile learning in different countries (Portugal, Spain, Slovakia, Hungary, UK, Italy and Turkey). Design/methodology/approach: For the survey, a questionnaire was prepared in English and Portuguese and…

  15. Users' Personal Conceptions of Usability and User Experience of Electronic and Software Products

    NARCIS (Netherlands)

    Haaksma, Tim R.; de Jong, Menno D.T.; Karreman, Joyce

    2018-01-01

    Research problem: Despite the abundance of research into usability and user experience (UX), there is still debate about the relationship between both concepts. The user perspective is underrepresented in all discussions. This study examines the personal conceptions that users of electronic and

  16. Understanding the reductions in US corn ethanol production costs: an experience curve approach

    NARCIS (Netherlands)

    Hettinga, W.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.; Hicks, K.

    2009-01-01

    The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by

  17. Financial Rewards Do Not Stimulate Co-Production : Evidence from Two Experiments

    NARCIS (Netherlands)

    W.H. Voorberg (William); S.R. Jilke (Sebastian); L.G. Tummers (Lars); V.J.J.M. Bekkers (Victor)

    2017-01-01

    textabstractWestern governments are increasingly trying to stimulate citizens to ‘co-produce’ public services, among others, by offering them financial incentives. However, there are competing views on whether financial incentives stimulate co-production. While some argue it increases citizens’

  18. APPLICATION EXPERIENCE OF GOAT'S MILK BASED PRODUCTS AMONG CHILDREN, SUFFERING FROM ATOPIC DERMATITIS

    Directory of Open Access Journals (Sweden)

    T.G. Malanicheva

    2007-01-01

    Full Text Available The purpose of the work is to study the efficiency of the diet therapy against atopic dermatitis by means of the goat's milk based products among children at different age. The researchers observed 188 children aged between 3 months and 18 years, suffering from atopic dermatitis aggravated by the mycotic infection. Patients of the main group (102 children under 3 received goat's milk based products within the hypo allergic diet — «Nanny» and «Nanny — Zolotaya Kozochka» adapted milk formulas, while children over 3 received «Amal Tea» instant goat's milk. The research findings have showed that the introduction of the goat's milk based products into the food ration leads not only to the positive short term results — achievement of the clinical remission on 12th–20th day from the moment the therapy starts, but also to the positive long term effect — remission extension, reduction of the disease recurrences, reduction of the general IgE level in blood serum and offending IgE allergens to the cow milk proteins and casein. Thus, the replacement of the cow milk based products within the ration of patients for «Nanny» and «Nanny — Zolotaya Kozochka» adapted milk formulas and «Amal Tea» instant goat's milk allows for optimization of the atopic dermatitis diet therapy among children at different age.Key words: atopic dermatitis, diet therapy, goat's milk.

  19. How Does Risk Management Influence Production Decisions? Evidence from a Field Experiment

    OpenAIRE

    Cole, Shawn; Giné, Xavier; Vickery, James

    2013-01-01

    Weather is a key source of income risk for many firms and households, particularly in emerging market economies. This paper uses a randomized controlled trial approach to study how an innovative risk management instrument for hedging rainfall risk affects production decisions among a sample of Indian agricultural firms. The analysis finds that the provision of insurance induces farmers to ...

  20. Power Production Experience from Wave Dragon Prototype Testing in Nissum Bredning

    DEFF Research Database (Denmark)

    Frigaard, Peter; Kofoed, Jens Peter

    The first Wave Dragon prototype power production testing started May 2003 and ended temporarily primo 2005. In the mentioned period Wave Dragon was situated in a corner of Nissum Bredning with relative little amount of wave energy. Main purpose of the tests was demonstration of survivability...

  1. Description of historical crop calendar data bases developed to support foreign commodity production forecasting project experiments

    Science.gov (United States)

    West, W. L., III (Principal Investigator)

    1981-01-01

    The content, format, and storage of data bases developed for the Foreign Commodity Production Forecasting project and used to produce normal crop calendars are described. In addition, the data bases may be used for agricultural meteorology, modeling of stage sequences and planting dates, and as indicators of possible drought and famine.

  2. The North American long-term soil productivity experiment: findings from the first decade of research

    Science.gov (United States)

    Robert F. Powers; D. Andrew Scott; Felipe g. Sanchez; Richard A. Voldseth; Deborah Page-Dumroese; John D. Elioff; Douglas M. Stone

    2005-01-01

    First decade findings on the impacts of organic matter removal and soil compaction are reported for the 26 oldest installations in the nation-wide network of long-term soil productivity sites. Complete removal of surface organic matter led to declines in soil C concentration to 20 cm depth and to reduced nutrient availability. The effect is attributed mainly to the...

  3. An integrated design experience on a wet-tree production semisubmersible

    Energy Technology Data Exchange (ETDEWEB)

    Fales, Raymond P.; Lee, Craig; Chen Xiang; Zhengquan Zhou [ABB FPS Houston, TX (United States)

    2004-07-01

    The semisubmersible platform has been a reliable work platform for the offshore oil and gas industry for over 40 years. The Semisubmersible is a very mature concept with hundreds of examples in use. Traditionally during the design phase, the motions have been developed to suit the independent services, drilling, offshore operations or production. However, recently with the move to ultra-deep water depths and the use of Steel Catenary Risers (SCRs), the design of Semisubmersible has to be considered as an integrated floating production system, to satisfy all the requirements from platform global performance, SCRs strength and fatigue, mooring, topside payload and layout, hull strength, deck structure, marine system layout, stability, fabrication and installation. These requirements usually conflict each other. As such it is imperative to consider them together, adjusting the design parameters during design loops to obtain an optimal design product. This paper will describe the integrated design process used and the optimal design principles applied to satisfy these conflicting requirements and provide an example of a wet-tree production semisubmersible integrated design. Particular emphasis will be on global performance, SCR design, deck structure arrangement options, fabrication and integration. (author)

  4. Productivity of organic and conventional arable cropping systems in long-term experiments in Denmark

    DEFF Research Database (Denmark)

    Shah, Ambreen; Askegaard, Margrethe; Rasmussen, Ilse Ankjær

    2017-01-01

    manure there was a tendency for increased DM yield over time at all sites, whereas little response was seen in N yield. In the O4 rotation DM and N yields tended to increase at Foulum over time, but there was little change at Flakkebjerg. The DM yield gap between organic and conventional systems in the 3......A field experiment comparing different arable crop rotations was conducted in Denmark during 1997–2008 on three sites varying in climatic conditions and soil types, i.e. coarse sand (Jyndevand), loamy sand (Foulum), and sandy loam (Flakkebjerg). The crop rotations followed organic farm management......, and from 2005 also conventional management was included for comparison. Three experimental factors were included in the experiment in a factorial design: 1) crop rotation (organic crop rotations varying in use of whole-year green manure (O1 and O2 with a whole-year green manure, and O4 without...

  5. Cognitive competencies - Products of genes, experience, and technology. [for training of primates

    Science.gov (United States)

    Rumbaugh, Duane M.; Savage-Rumbaugh, E. S.

    1992-01-01

    The paper examines methods used in studying cognitive competency in primates. Citing experiments on teaching language skills to chimpanzees, it is shown that some methods used for inquiry might lead to the cultivation and generation of new competencies, and specifically to the development of observational and relational learning skills. It is noted that methods can also limit the generality of conclusions; erroneous conclusions may be made based on certain generally accepted methods, whereby the research might be treatments that profoundly determine the assessment of dependent variables. Particular attention is given to the role of age in learning, showing that young primates can be taught the meaning of lexigrams and many specific tasks in much shorter time than adults; on the basis of these experiments, it was concluded that cultural gains did evolve primarily as a consequence of context within which infants were growing.

  6. The germanium isotopes production rate in background process in SAGE experiment

    International Nuclear Information System (INIS)

    Gavrin, V.N.; Gorbachev, V.V.; Ibragimova, T.V.; Cleveland, B.T.

    2002-01-01

    The analysis of the direct determination of systematics connected with the germanium isotopes generation of in background processes in radiochemical SAGE experiments on measuring solar neutrinos is described. The found 68 Ge generation rate is 6.5 (1 ± 1.0) times higher than expected; the generation rate of 69 Ge does not exceed preliminary evaluations. The result on 68 Ge corresponds to the systematic of cosmic ray muons of 5.8% (4.5 SNU) for the measured capture rate of solar neutrino of 77.0 SNU. To check the cosmic-ray muon influence of the SAGE systematic one suggests the experiment in place of underground scintillation telescope of the Baksan neutrino observatory on the Institute for Nuclear Research of the RAS [ru

  7. Production and qualification of 40 km of Al-stabilized NbTi cable for the ATLAS experiment at CERN

    CERN Document Server

    Baccaglioni, G; Cartegni, G C; Horváth, I L; Neuenschwander, J; Pedrini, D; Rossi, L; Volpini, G

    2002-01-01

    The production of the conductor for the superconducting toroids of the ATLAS experiment at LHC (CERN) is now in progress. The toroid system, composed of one barrel toroid (BT) and two end cap toroids (ECTs), exploits aluminum-clad Rutherford-type NbTi conductors of large size (57 * 12 mm for BT, 42 * 12 mm for ECTs) and high critical current (Ic) (58 kA for BT and 60 kA for ECTs @ 4.2 K, 5 T). Some 55 km of conductor are required for the BT and 26 km for the ECTs, respectively. An Italian-Swiss (ETH Zurich and INFN) consortium is in charge of the delivery of half of the whole amount. This paper describes the results of this production with particular emphasis to the quality control system developed to monitor the production with both on-line controls and the post-production quality assessment protocols. The main result is the confirmation that the technologies selected and the whole process are reliable and reproducible over large production quantities. The overall degradation due to the cabling and the co-ex...

  8. SPHINX phototube RICH detector for diffractive production experiments at Serpukhov accelerator

    CERN Document Server

    Kozhevnikov, A; Molchanov, V; Rykalin, V I; Solyanik, V

    1999-01-01

    The RICH detector used in the SPHINX experiment at the Serpukhov accelerator is described. The optical system of this detector consists of two spherical mirrors with focal length of 125 cm. Two matrices with 736 phototubes in total are used for the photocathode. The standard performance characteristics of the detector are a value of 42 cm sup - sup 1 for N sub 0 and a single hit resolution of 0.5 cm. Particle identification capability of the detector is discussed.

  9. SPHINX phototube RICH detector for diffractive production experiments at Serpukhov accelerator

    International Nuclear Information System (INIS)

    Kozhevnikov, A.; Kubarovsky, V.; Molchanov, V.; Rykalin, V.; Solyanik, V.

    1999-01-01

    The RICH detector used in the SPHINX experiment at the Serpukhov accelerator is described. The optical system of this detector consists of two spherical mirrors with focal length of 125 cm. Two matrices with 736 phototubes in total are used for the photocathode. The standard performance characteristics of the detector are a value of 42 cm -1 for N 0 and a single hit resolution of 0.5 cm. Particle identification capability of the detector is discussed

  10. SPHINX phototube RICH detector for diffractive production experiments at Serpukhov accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Kozhevnikov, A.; Kubarovsky, V.; Molchanov, V. E-mail: molchanov@mx.ihep.su; Rykalin, V.; Solyanik, V

    1999-08-21

    The RICH detector used in the SPHINX experiment at the Serpukhov accelerator is described. The optical system of this detector consists of two spherical mirrors with focal length of 125 cm. Two matrices with 736 phototubes in total are used for the photocathode. The standard performance characteristics of the detector are a value of 42 cm{sup -1} for N{sub 0} and a single hit resolution of 0.5 cm. Particle identification capability of the detector is discussed.

  11. Experiments on The Retention of The Fission Product Iodine in Nuclear Reactor Accidents

    International Nuclear Information System (INIS)

    Bruchertseifer, H.; Cripps, R.; Guentay, S.; Jaeckel, B.

    2004-01-01

    The paper reports PSI participation in the ICHEMM Project (Iodine Chemistry and Mitigation Mechanisms) of the EU 5th Framework Programme, which has the objective of identifying new possible mitigation processes, or accident management measures, favouring the conversion of volatile iodine species, especially organic iodine released during a severe accident at a Nuclear Power Plant (NPP), into nonvolatile forms. Significant effort has been expended, firstly to develop analytical methods for determining concentrations of the common iodine species (iodide, iodate, molecular iodine and methyl iodide), and secondly to provide missing and important information on decomposition phenomena and involved reactions. Experiments have been conducted at PSI to obtain data on thermal (hydrolysis) and radiolytic decomposition of CH 3 I in aqueous solution under conditions as close as possible to those in an anticipated accident. Radioactive-labelled methyl iodide was used to monitor and quantify the decomposition and to determine the overall mass balance. Results have shown that CH 3 I hydrolysis at 90 o C will dominate over radiolysis at the dose rates (max. 0.4 Gy.s -1 ) employed in the experiments. Much increased decomposition rates of CH 3 I have been achieved with chemical reagents (additives), such as sodium thiosulphate or ammonium sulphide. After completion of the ICHEMM Project, further advances have been made from experiments carried out on additives (especially in combination with Aliquat 336) in terms of a fast and complete retention of iodine. The data from these experiments are of direct relevance to severe accident management for both PWR and BWR systems. The impact of the results on possible strategies for management of radioactive waste has also been investigated. (author)

  12. Experiments on The Retention of The Fission Product Iodine in Nuclear Reactor Accidents

    Energy Technology Data Exchange (ETDEWEB)

    Bruchertseifer, H.; Cripps, R.; Guentay, S.; Jaeckel, B

    2004-03-01

    The paper reports PSI participation in the ICHEMM Project (Iodine Chemistry and Mitigation Mechanisms) of the EU 5th Framework Programme, which has the objective of identifying new possible mitigation processes, or accident management measures, favouring the conversion of volatile iodine species, especially organic iodine released during a severe accident at a Nuclear Power Plant (NPP), into nonvolatile forms. Significant effort has been expended, firstly to develop analytical methods for determining concentrations of the common iodine species (iodide, iodate, molecular iodine and methyl iodide), and secondly to provide missing and important information on decomposition phenomena and involved reactions. Experiments have been conducted at PSI to obtain data on thermal (hydrolysis) and radiolytic decomposition of CH{sub 3}I in aqueous solution under conditions as close as possible to those in an anticipated accident. Radioactive-labelled methyl iodide was used to monitor and quantify the decomposition and to determine the overall mass balance. Results have shown that CH{sub 3}I hydrolysis at 90{sup o}C will dominate over radiolysis at the dose rates (max. 0.4 Gy.s{sup -1}) employed in the experiments. Much increased decomposition rates of CH{sub 3}I have been achieved with chemical reagents (additives), such as sodium thiosulphate or ammonium sulphide. After completion of the ICHEMM Project, further advances have been made from experiments carried out on additives (especially in combination with Aliquat 336) in terms of a fast and complete retention of iodine. The data from these experiments are of direct relevance to severe accident management for both PWR and BWR systems. The impact of the results on possible strategies for management of radioactive waste has also been investigated. (author)

  13. Global warming and hepatotoxin production by cyanobacteria: what can we learn from experiments?

    Science.gov (United States)

    El-Shehawy, Rehab; Gorokhova, Elena; Fernández-Piñas, Francisca; del Campo, Francisca F

    2012-04-01

    Global temperature is expected to rise throughout this century, and blooms of cyanobacteria in lakes and estuaries are predicted to increase with the current level of global warming. The potential environmental, economic and sanitation repercussions of these blooms have attracted considerable attention among the world's scientific communities, water management agencies and general public. Of particular concern is the worldwide occurrence of hepatotoxic cyanobacteria posing a serious threat to global public health. Here, we highlight plausible effects of global warming on physiological and molecular changes in these cyanobacteria and resulting effects on hepatotoxin production. We also emphasize the importance of understanding the natural biological function(s) of hepatotoxins, various mechanisms governing their synthesis, and climate-driven changes in food-web interactions, if we are to predict consequences of the current and projected levels of global warming for production and accumulation of hepatotoxins in aquatic ecosystems. Copyright © 2011 Elsevier Ltd. All rights reserved.

  14. 3 Years Experience with Energy Production on the Nissum Bredning Wave Dragon Prototype

    DEFF Research Database (Denmark)

    Frigaard, Peter; Tedd, James; Kofoed, Jens Peter

    2006-01-01

    Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during this ext......Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during...... this extended period. The prototype is highly instrumented. The overtopping characteristic and the power produced are presented here. This has enabled comparison between the prototype and earlier results from both laboratory model and computer simulation. This gives the optimal operating point and the expected...... power of the device. The project development team has gained much soft experience from working in the harsh offshore environment. In particular the effect of marine growth in the draft tubes of the turbines has been investigated. The control of the device has been a focus for development as is operates...

  15. Solar hydrogen production with semiconductor metal oxides: new directions in experiment and theory

    DEFF Research Database (Denmark)

    Valdes, Alvaro; Brillet, Jeremie; Graetzel, Michael

    2012-01-01

    An overview of a collaborative experimental and theoretical effort toward efficient hydrogen production via photoelectrochemical splitting of water into di-hydrogen and di-oxygen is presented here. We present state-of-the-art experimental studies using hematite and TiO2 functionalized with gold n...... nanoparticles as photoanode materials, and theoretical studies on electro and photo-catalysis of water on a range of metal oxide semiconductor materials, including recently developed implementation of self-interaction corrected energy functionals....

  16. Experiences with preventive procedures application in the process of beer production in Czech Republic

    OpenAIRE

    Jana Kotovicová; František Toman; Magdalena Vaverková

    2011-01-01

    Food-processing industry is an intriguing field regarding prevention procedures application. All food-processing operations have common fundamental spheres of problems – wastewater polluted by organic substances, solid waste of biological origin and losses during source material processing. Beer production process is a representative of food-processing sphere. The brewing industry has an ancient tradition and is still a dynamic sector open to new developments in technology and scientific prog...

  17. Computer experiment studies on mechanisms for irradiation induced defect production and annealing processes. Final report

    International Nuclear Information System (INIS)

    Beeler, J.R. Jr.; Beeler, M.F.

    1979-06-01

    This research is based on pair potentials used in the Brookhaven work. It extends their use in defect production simulations to the 5 MeV range and characterizes the short term annealing of the primary defect states. Defect properties and interactions are studied. Defect interactions include carbon, helium, and misfit metallic substitutional impurity interactions with vacancy and interstitial defects as well as vacancy-vacancy, interstitial-interstitial and vacancy-interstitial interactions

  18. Separation and purification of 99Mo from uranium and fission products using Cintichem process, our experience

    International Nuclear Information System (INIS)

    Manolkar, R.B.; Mathakar, A.R.; Kumar, Yogendra; Kumar, Manoj; Dash, A.; Venkatesh, Meera; Pillai, K.T.; Singh, Sarbjit; Venugopal, V.

    2009-01-01

    A pilot study was carried out to assess the feasibility of producing 99 Mo by fission of Unat following the Cintichem method. U-Mo alloy was irradiated for one week at Dhruva reactor and processed for the separation of 99 Mo from fission products. The irradiated targets were chemically processed to separate and purify the 99 Mo. Recovery of ∼70% and the purity of 99 Mo was > 99%. (author)

  19. Computer experiment studies on mechanisms for irradiation induced defect production and annealing processes. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Beeler, J.R. Jr.; Beeler, M.F.

    1979-06-01

    This research is based on pair potentials used in the Brookhaven work. It extends their use in defect production simulations to the 5 MeV range and characterizes the short term annealing of the primary defect states. Defect properties and interactions are studied. Defect interactions include carbon, helium, and misfit metallic substitutional impurity interactions with vacancy and interstitial defects as well as vacancy-vacancy, interstitial-interstitial and vacancy-interstitial interactions. (FS)

  20. Haze production rates in super-Earth and mini-Neptune atmosphere experiments

    Science.gov (United States)

    Hörst, Sarah M.; He, Chao; Lewis, Nikole K.; Kempton, Eliza M.-R.; Marley, Mark S.; Morley, Caroline V.; Moses, Julianne I.; Valenti, Jeff A.; Vuitton, Véronique

    2018-04-01

    Numerous Solar System atmospheres possess photochemically generated hazes, including the characteristic organic hazes of Titan and Pluto. Haze particles substantially impact atmospheric temperature structures and may provide organic material to the surface of a world, potentially affecting its habitability. Observations of exoplanet atmospheres suggest the presence of aerosols, especially in cooler (diversity in haze production rates, as some—but not all—super-Earth and mini-Neptune atmospheres will possess photochemically generated haze.

  1. Systematic study of strangeness production and dynamic behaviour with the FOPI experiment at SIS-18

    Energy Technology Data Exchange (ETDEWEB)

    Zinyuk, Victoria

    2016-05-10

    This work is dedicated to the investigation of in-medium behaviour of strange particles. In-medium production and propagation of K{sup +} and K{sup -} mesons is studied with the FOPI apparatus in {sup 58}Ni + {sup 58}Ni collisions at the incident beam energy of E{sub beam}= 1.91 AGeV, i.e. near the strangeness production threshold energies. Weak in-plane 'anti-flow' with respect to protons and a slight 'squeeze-out' is found in the azimuthal emission pattern of K{sup +} mesons. K{sup -} mesons exhibit an isotropic emission pattern within large statistic uncertainties. The comparison to the predictions of two independent transport calculations, HSD and IQMD, suggests a weakly repulsive KN in-medium potential of U{sub KN}20±5 MeV and an attractive anti KN in-medium potential of U{sub K}{sup {sub -N}}=-40 ± 10 MeV. Production of K{sup +/-/0}, φ mesons and the Λ baryon at normal nuclear matter density is studied in π{sup -} + A reactions with C, Cu and Pb targets at incident beam momentum of p{sub π{sup -}}=1.7 GeV/c. Differences in the final state phase space distributions measured in heavy and light targets point to repulsion for K{sup +} and K{sup 0}{sub S} mesons in nuclear medium. The latter is solely attributed to the strong interaction. The corresponding comparison for K{sup -} mesons suggests a strong absorption in nuclear medium. Observed φ meson yields support the hypothesis of Z{sup α}-scaling of the production cross section.

  2. Software Productivity of Field Experiments Using the Mobile Agents Open Architecture with Workflow Interoperability

    Science.gov (United States)

    Clancey, William J.; Lowry, Michael R.; Nado, Robert Allen; Sierhuis, Maarten

    2011-01-01

    We analyzed a series of ten systematically developed surface exploration systems that integrated a variety of hardware and software components. Design, development, and testing data suggest that incremental buildup of an exploration system for long-duration capabilities is facilitated by an open architecture with appropriate-level APIs, specifically designed to facilitate integration of new components. This improves software productivity by reducing changes required for reconfiguring an existing system.

  3. Parameter study of electric power production in wind farms - experiments using two model scale wind turbines

    OpenAIRE

    Ceccotti, Clio

    2015-01-01

    Wind farms are widely developed even if several unsolved problems need to be faced. The rotor-wake interaction involves different physical phenomena, not yet fully understood, directly affecting the overall wind farm power production. Numerical models and engineering rules have always been used to design wind farm layout but a spread between power predictions and results is verified. In this context wind energy research assumes a "back to basic" approach, by means of wind tunne...

  4. Implementing international experience in promoting agricultural products to foreign markets: the Russian export strategy

    Directory of Open Access Journals (Sweden)

    Lilia S. Revenko

    2017-01-01

    Full Text Available Almost all countries in the world actively regulate both import and export of agricultural products, however this process is very conflictгфд because of acute contradictions on the market. They are associated with the changing conditions of production, increase of attention of the world community to the food securitysituation, change of the used resources efficiency level, competition enhancement. Both internal and external components of agricultural producers support are important for Russia. That means the regulation should be aimed at meeting the needs of the domestic market and at increasing competitiveness of Russian products abroad. The development of the Russian export strategy for agricultural products is currently very important. This problem is closely related to the general subject of the agricultural productiondevelopment, but it has an explicit specific character. Inthiscontextexperienceofforeigncountriesisinteresting. Almost all tools of export regulation existing in the world practice are used in the foreign practice of export regulation of agricultural raw materials and food. Stimulation measures prevail in regards to the coverage of commodity items, number of episodes involving the use of agricultural export regulationmeasures, effectiveness of impact to the national agricultural sector. Holistic strategies of agricultural export development are not a widespread phenomenon abroad at the present stage of the world economy development. Their existence is typical for countries with a high level of food self-sufficiency. Special programs where export component is a harmonically built-in element are now more widely spread. Export development programs of the developed countries include a range of measures to maintain the target income level of producers and to maintain procurement and consumer prices. Export policy of the developing countries has a subordinated importance and is considered as one of the levels to develop national

  5. The WATERMED field experiment: validation of the AATSR LST product with in situ measurements

    Science.gov (United States)

    Noyes, E.; Soria, G.; Sobrino, J.; Remedios, J.; Llewellyn-Jones, D.; Corlett, G.

    The Advanced Along-Track Scanning Radiometer (AATSR) onboard ESA's Envisat Satellite, is the third in a series of a precision radiometers designed to measure Sea Surface Temperature (SST) with accuracies of better than ± 0.3 K (within 1-sigma limit). Since its launch in March 2001, a prototype AATSR Land Surface Temperature (LST) product has been produced for validation purposes only, with the product becoming operational from mid-2004. The (A)ATSR instrument design is unique in that it has both a nadir- and a forward-view, allowing the Earth's surface to be viewed along two different atmospheric path lengths, thus enabling an improved atmospheric correction to be made when retrieving surface temperature. It also uses an innovative and exceptionally stable on-board calibration system for its infrared channels, which, together with actively cooled detectors, gives extremely high radiometric sensitivity and precision. In this presentation, results from a comparison of the prototype LST product with ground-based measurements obtained at the WATERMED (WATer use Efficiency in natural vegetation and agricultural areas by Remote sensing in the MEDiterranean basin) field site near Marrakech, Morocco, are presented. The comparison shows that the AATSR has a positive bias of + 1.5 K, with a standard deviation of 0.7 K, indicating that the product is operating within the target specification (± 2.5 K) over the WATERMED field site. However, several anomalous validation points were observed during the analysis and we will discuss possible reasons for the occurrence of these data, including their coincidence with the presence of an Envisat blanking pulse (indicating the presence of a radar pulse at the time of AATSR pixel integration). Further investigation into this matter is required as previous investigations have always indicated that the presence of a payload radar pulse does not have any effect on (A)ATSR data quality.

  6. Multicore in production: advantages and limits of the multiprocess approach in the ATLAS experiment

    International Nuclear Information System (INIS)

    Binet, S; Calafiura, P; Lavrijsen, W; Leggett, C; Tatarkhanov, M; Tsulaia, V; Jha, M K; Lesny, D; Severini, H; Smith, D; Snyder, S; VanGemmeren, P; Washbrook, A

    2012-01-01

    The shared memory architecture of multicore CPUs provides HEP developers with the opportunity to reduce the memory footprint of their applications by sharing memory pages between the cores in a processor. ATLAS pioneered the multi-process approach to parallelize HEP applications. Using Linux fork() and the Copy On Write mechanism we implemented a simple event task farm, which allowed us to achieve sharing of almost 80% of memory pages among event worker processes for certain types of reconstruction jobs with negligible CPU overhead. By leaving the task of managing shared memory pages to the operating system, we have been able to parallelize large reconstruction and simulation applications originally written to be run in a single thread of execution with little to no change to the application code. The process of validating AthenaMP for production took ten months of concentrated effort and is expected to continue for several more months. Besides validating the software itself, an important and time-consuming aspect of running multicore applications in production was to configure the ATLAS distributed production system to handle multicore jobs. This entailed defining multicore batch queues, where the unit resource is not a core, but a whole computing node; monitoring the output of many event workers; and adapting the job definition layer to handle computing resources with different event throughputs. We will present scalability and memory usage studies, based on data gathered both on dedicated hardware and at the CERN Computer Center.

  7. Allosuppressor T lymphocytes abolish migration inhibition factor production in autoimmune thyroid disease: evidence from radiosensitivity experiments

    International Nuclear Information System (INIS)

    Topliss, D.J.; Okita, N.; Lewis, M.; Row, V.V.; Volpe, R.

    1981-01-01

    The ability of normal T lymphocytes to abolish the production of migration inhibition factor by antigen-sensitized T lymphocytes of Graves' disease (GD) and Hashimoto's thyroiditis (HT) in response to thyroid antigen has been studied by a modified migration inhibition factor test using isolated T lymphocytes alone. The production of migration inhibition factor was consistently abolished when normal T lymphocytes were mixed with GD or HT T lymphocytes in various ratios (1:9, 2:8, 5:5) as reported previously (Okita et al., 1980b). However, prior in-vitro irradiation (1000 rad) of the normal T lymphocytes resulted in loss of their ability to abolish migration inhibition factor production by the antigen-sensitized T lymphocytes of GD and HT. The effect is consistent with the radiosensitivity of suppressor T lymphocytes and indicates that the effect of normal T lymphocytes on GD and HT T lymphocytes is one of allosuppression. The results support the view that there is a defect in suppressor T cell function in GD and HT. (author)

  8. How do I provide leukapheresis products? Blood center experience and evidence for process improvement.

    Science.gov (United States)

    Ginzburg, Yelena; Kessler, Debra; Narici, Manlio; Caltabiano, Melinda; Rebosa, Mark; Strauss, Donna; Shaz, Beth

    2013-10-01

    The past few decades have seen a resurgence of interest in leukapheresis products to improve the survival of infected patients with neutropenia. These products have a short shelf life and require donor stimulation with dexamethasone before collection. Additionally, a system with good communications and logistical support is essential. A recent survey of blood centers in North America revealed that the majority of centers collecting leukapheresis products use steroid-stimulated donors. The survey results suggested that an analysis of the process and potential process improvement would be of interest to the transfusion medicine community. Data from 2008 to 2011 regarding donor selection, donor dexamethasone stimulation, leukapheresis collection, and correlations between potentially pertinent variables for process improvement were analyzed. Results from an analysis of cost are also included. We evaluate 432 leukapheresis donations and demonstrate correlations between 1) pre- and poststimulation white blood cell (WBC) count (pproduct granulocyte yield (pimprovement in granulocyte quality and yield can be accomplished in dexamethasone-stimulated donors, by selecting eligible donors with relatively high normal prestimulation WBC counts and/or previously good responses to dexamethasone, increasing the duration between dexamethasone stimulation and granulocyte collection, and maintaining optimal hematocrit (5%-10%) in granulocyte collections. Because the majority of surveyed blood centers collecting stimulated granulocytes use steroids alone, modifications presented here may prove useful. Further assessment of correlation between granulocyte yield and clinical outcome will await results of additional studies. © 2012 American Association of Blood Banks.

  9. Research experiences on the reuse of industrial waste for concrete production

    Directory of Open Access Journals (Sweden)

    Abbà Alessandro

    2017-01-01

    Full Text Available The aim of this study was to assess the feasibility of concrete production using different kinds of industrial wastes as “recycled aggregate”. The wastes studied in this work were: fly ashes and slags from Electric Arc Furnace (EAF steel plant; foundry sands produced from foundry dies; slags from lead processing; Waelz slags; solid residues from municipal solid waste incineration (MSWI plant (with mass-burning kiln and fluidized bed reactor; sludge from industrial wastewater treatment plants. Good compressive strength (similar to natural concrete was achieved after 28 days of curing by concrete mixtures obtained with the partial replacement (from 7% to 40% by weight of natural aggregates with slags from lead processing, foundry sands, Waelz slags and bottom ashes from MSW incineration. The worst mechanical and leaching behaviours were shown by concrete samples containing EAF fly ashes and sludge from industrial wastewater treatment. For the residues with the best performance, concrete products (kerbs and flat tiles were casted. Their mechanical and leaching characterization has shown that the reuse of these residues for concrete product is feasible.

  10. Electroweak production of the top quark in the Run 2 of the D0 experiment; Production electrofaible du quark top au Run 2 de l'experience D0

    Energy Technology Data Exchange (ETDEWEB)

    Clement, B

    2006-04-15

    The work exposed in this thesis deals with the search for electroweak production of top quark (single top) in proton-antiproton collisions at {radical}s = 1.96 TeV. This production mode has not been observed yet. Analyzed data have been collected during the Run II of the D diameter experiment at the Fermilab Tevatron collider. These data correspond to an integrated luminosity of 370 pb{sup -1}. In the Standard Model, the decay of a top quark always produce a high momentum bottom quark. Therefore bottom quark jets identification plays a major role in this analysis. The large lifetime of b hadrons and the subsequent large impact parameters relative to the interaction vertex of charged particle tracks are used to tag bottom quark jets. Impact parameters of tracks attached to a jet are converted into the probability for the jet to originate from the primary vertex. This algorithm has a 45% tagging efficiency for a 0.5% mistag rate. Two processes (s and t channels) dominate single top production with slightly different final states. The searched signature consists in 2 to 4 jets with at least one bottom quark jet, one charged lepton (electron or muon) and missing energy accounting for a neutrino. This final state is background dominated and multivariate techniques are needed to separate the signal from the two main backgrounds: associated production of a W boson and jets and top quarks pair production. The achieved sensitivity is not enough to reach observation and we computed upper limits at the 95% confidence level at 5 pb (s-channel) and 4.3 pb (t-channel) on single top production cross-sections. (author)

  11. Geospatial Data as a Service: The GEOGLAM Rangelands and Pasture Productivity Map Experience

    Science.gov (United States)

    Evans, B. J. K.; Antony, J.; Guerschman, J. P.; Larraondo, P. R.; Richards, C. J.

    2017-12-01

    Empowering end-users like pastoralists, land management specialists and land policy makers in the use of earth observation data for both day-to-day and seasonal planning needs both interactive delivery of multiple geospatial datasets and the capability of supporting on-the-fly dynamic queries while simultaneously fostering a community around the effort. The use of and wide adoption of large data archives, like those produced by earth observation missions, are often limited by compute and storage capabilities of the remote user. We demonstrate that wide-scale use of large data archives can be facilitated by end-users dynamically requesting value-added products using open standards (WCS, WMS, WPS), with compute running in the cloud or dedicated data-centres and visualizing outputs on web-front ends. As an example, we will demonstrate how a tool called GSKY can empower a remote end-user by providing the data delivery and analytics capabilities for the GEOGLAM Rangelands and Pasture Productivity (RAPP) Map tool. The GEOGLAM RAPP initiative from the Group on Earth Observations (GEO) and its Agricultural Monitoring subgroup aims at providing practical tools to end-users focusing on the important role of rangelands and pasture systems in providing food production security from both agricultural crops and animal protein. Figure 1, is a screen capture from the RAPP Map interface for an important pasture area in the Namibian rangelands. The RAPP Map has been in production for six months and has garnered significant interest from groups and users all over the world. GSKY, being formulated around the theme of Open Geospatial Data-as-a-Service capabilities uses distributed computing and storage to facilitate this. It works behind the scenes, accepting OGC standard requests in WCS, WMS and WPS. Results from these requests are rendered on a web-front end. In this way, the complexities of data locality and compute execution are masked from an end user. On-the-fly computation of

  12. Hadron Production measurements at the NA61/SHINE experiment for the T2K Neutrino Flux Prediction

    CERN Document Server

    Sgalaberna, Davide

    2015-01-01

    The largest source of uncertainty on the initial neutrino flux in modern accelerator neutrino ex- periments is the poor knowledge on the production of hadrons that decay into neutrinos. T2K is a long baseline neutrino experiment that aims to precisely measure the parameters of the PMNS ma- trix via the n m ! n e appearance and n m disappearance as well as to look for the first indication of CP violation in the leptonic sector. The required total systematic uncertainty on the neutrino flux as low as 5% can hopefully be achieved with high precision hadron production measurements, performed by the dedicated auxiliary NA61/SHINE experiment at the CERN SPS. Production of hadrons in 31 GeV/c proton interactions on carbon is measured with a thin target (4% of the nuclear interaction length) to study the primary interactions and with a T2K replica target (1.9 interaction length) to investigate re-interactions in the long target. The low statistic pilot data-set taken in 2007 was used to measure hadron multiplicities ...

  13. Computer simulation of charged fusion-product trajectories and detection efficiency expected for future experiments within the COMPASS tokamak

    International Nuclear Information System (INIS)

    Kwiatkowski, Roch; Malinowski, Karol; Sadowski, Marek J

    2014-01-01

    This paper presents results of computer simulations of charged particle motions and detection efficiencies for an ion-pinhole camera of a new diagnostic system to be used in future COMPASS tokamak experiments. A probe equipped with a nuclear track detector can deliver information about charged products of fusion reactions. The calculations were performed with a so-called Gourdon code, based on a single-particle model and toroidal symmetry. There were computed trajectories of fast ions (> 500 keV) in medium-dense plasma (n e  < 10 14  cm −3 ) and an expected detection efficiency (a ratio of the number of detected particles to that of particles emitted from plasma). The simulations showed that charged fusion products can reach the new diagnostic probe, and the expected detection efficiency can reach 2 × 10 −8 . Based on such calculations, one can determine the optimal position and orientation of the probe. The obtained results are of importance for the interpretation of fusion-product images to be recorded in future COMPASS experiments. (paper)

  14. Study of the production of nuclei and anti-nuclei at the LHC with the ALICE experiment

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00508690; Bufalino, Stefania

    In the ultra-relativistic lead-lead collisions at the CERN Large Hadron Collider (LHC), a state of matter called Quark Gluon Plasma (QGP) is created. A typical signature of a heavy ion collision (HIC) correlated to the production of the QGP is the large number of particles produced ($\\mathrm{d} N_{\\mathrm{ch}}/\\mathrm{d}\\eta$ up to 2000 in Pb-Pb collisions at $\\sqrt{s_{\\mathrm{NN}}}=5.02$ TeV). This high multiplicity environment poses a tremendous experimental challenge on the experiments that have to cope with the high density of signals in their sensitive volume. A Large Ion Collider Experiment (ALICE) has been designed to deal with the harsh environment of a HIC and to study in details the characteristics of the QGP. Among the particles produced in a HIC, light nuclei and their anti-matter companions are of special interest since the production mechanism of such loosely bound states is not clear in high energy collisions. The production rate at the LHC for the lightest of these objects, the deuteron, is a...

  15. The role of visual experience in the production of emotional facial expressions by blind people: a review.

    Science.gov (United States)

    Valente, Dannyelle; Theurel, Anne; Gentaz, Edouard

    2018-04-01

    Facial expressions of emotion are nonverbal behaviors that allow us to interact efficiently in social life and respond to events affecting our welfare. This article reviews 21 studies, published between 1932 and 2015, examining the production of facial expressions of emotion by blind people. It particularly discusses the impact of visual experience on the development of this behavior from birth to adulthood. After a discussion of three methodological considerations, the review of studies reveals that blind subjects demonstrate differing capacities for producing spontaneous expressions and voluntarily posed expressions. Seventeen studies provided evidence that blind and sighted spontaneously produce the same pattern of facial expressions, even if some variations can be found, reflecting facial and body movements specific to blindness or differences in intensity and control of emotions in some specific contexts. This suggests that lack of visual experience seems to not have a major impact when this behavior is generated spontaneously in real emotional contexts. In contrast, eight studies examining voluntary expressions indicate that blind individuals have difficulty posing emotional expressions. The opportunity for prior visual observation seems to affect performance in this case. Finally, we discuss three new directions for research to provide additional and strong evidence for the debate regarding the innate or the culture-constant learning character of the production of emotional facial expressions by blind individuals: the link between perception and production of facial expressions, the impact of display rules in the absence of vision, and the role of other channels in expression of emotions in the context of blindness.

  16. Experiments on determination and limitation of fission and activation product release during core meltdown

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht, H; Krause, W; Wild, H [Kernforschungszentrum Karlsruhe (Germany, F.R.). Inst. fuer Radiochemie; Perinic, D; Kammerer, B; Knauss, H; Mack, A; Stuka, B [Kernforschungszentrum Karlsruhe (Germany, F.R.). Abt. Reaktorbetrieb und Technik; Osborne, M F

    1976-06-01

    In melting experiments with Corium samples of 500 g under air, temperatures of about 2,300/sup 0/C could be reached whereas 500 g samples of Ni could be heated in argon up to only 1,400/sup 0/C. Obviously, the exothermic oxidation reaction of the zircaloy and steel is the reason for that considerable rise of the Corium temperature in air. Using smaller Ni samples (30 g) the maximum HF-power being coupled to the melt material has been determined by measuring the time of constant temperature at the melting point with the generator at full power. The thermal power effectively transmitted to the specimen was only 1.2 KW. Thus, for melting kg-amounts of Corium, a higher generator power is needed as well as a more effective HF-coupling. The rented generator now in use will be replaced, therefore, by a device with a nominal power of 120 KW, and the power transmission to the induction coil will be improved. The first series of release experiments with 30-60 g of Corium will not be affected by these changes. Melting experiments with various steel components (Fe, Cr, Ni) in an argon atmosphere and with Corium under air did not show any selective influence of the vapors on the intensities of the wavelengths used for the temperature measurement. The behavior of a spherical glass vessel above the crucible was quite satisfactory. After melting tests with temperatures of more than 2,700/sup 0/C it was not broken nor did it show any appearance of softening.

  17. First results on strange baryon production from the NA57 experiment

    CERN Document Server

    Antinori, Federico; Barbera, R; Bhasin, A; Bloodworth, Ian J; Bruno, G; Bull, S A; Caliandro, R; Campbell, M; Carena, W; Carrer, N; Clarke, R F; De Haas, A P; Di Bari, D; Di Liberto, S; Divià, R; Elia, D; Evans, D; Fanebust, F; Fayazzadeh, F; Fedorisin, J; Feofilov, G A; Fini, R A; Ftácnik, J; Ghidini, B; Grella, G; Helstrup, H; Henriquez, M; Holme, A K; Jacholkowski, A; Jones, G T; Jovanovic, P; Jusko, A; Kamermans, R; Kinson, J B; Klempt, W; Knudson, K; Kolojvari, A A; Kondratev, V A; Krilik, I; Kravcakova, A; Kuijer, P; Lenti, V; Lietava, R; Løvhøiden, G; Lupták, M; Manzari, V; Martinská, G; Mazzoni, M A; Meddi, F; Michalon, A; Morando, M; Muigg, D; Nappi, E; Navach, F; Norman, P I; Palmeri, A; Pappalardo, G S; Pastircák, B; Pisút, J; Pisútová, N; Posa, F; Quercigh, Emanuele; Riggi, F; Röhrich, D; Romano, G; Safarík, K; Sándor, L; Schillings, E; Segato, G F; Sené, M; Sené, R; Snoeys, W; Soramel, F; Staroba, P; Tulina, T A; Turrisi, R; Tveter, T S; Urbán, J; Valiev, F F; Van den Brink, A; Van de Ven, P; Van de Vyvre, P; van Eijndhoven, N; Van Hunen, J J; Vascotto, Alessandro; Vik, T; Villalobos Baillie, O; Vinogradov, L I; Virgili, T; Votruba, M F; Vrláková, J; Závada, P

    2002-01-01

    We briefly describe the NA57 experiment, the status of the data taking, of the event reconstruction and of the physics analysis. For the physics results, we shall keep separate the study of the 40 A GeV /c Pb-Pb data (for which the bulk of reference p-Be data are still to be collected in 2001) from the study of the enhancements as a function of the number of wounded nucleons at 160 A GeV/c. (11 refs).

  18. Involving Freight Transport Actors in Production of Knowledge - Experience with Future Workshop Methodology

    DEFF Research Database (Denmark)

    Jespersen, Per Homann; Drewes, Lise

    2005-01-01

    the experience and knowledge of actors in the freight transport sector are included directly in a scientific process in order to develop future and strategic studies. Future research is often produced as desktop research and presented as the results of scientists’ forecasting and scenario building...... in the format of a future workshop included freight transport stakeholders in the research process in order to produce knowledge meeting scientific quality criteria and at the same time in a form suitable for improving the problem solving capabilities of the participants....

  19. Experience in applying 60Co γ-rays for careful production of inactivated influenza virus vaccines

    International Nuclear Information System (INIS)

    Nordheim, W.; Braeuniger, S.; Schulze, P.; Dittmann, S.; Petzold, G.; Teupel, D.; Luther, P.; Tischner, H.; Baer, M.; Akademie der Wissenschaften der DDR, Leipzig. Zentralinstitut fuer Isotopen- und Strahlenforschung)

    1987-01-01

    Radiation doses between 12 and 13 kGy at 15-20 0 C were sufficient for mild inactivation of influenza viruses. Under these conditions the decisive surface antigens hemagglutinin and neuraminidase were treated with care, and the preparations of influenza viruses revealed good immunogenicity in the animal experiment. Morphologic alterations after application of 20 kGy could not be demonstrated in electron microscopic investigations. Doses of 9.5-9.9 kGy in combination with a very low quantity of HCHO (1:15000) is sufficient for inactivation. Reactivation of influenza viruses after treatment could not be demonstrated. (author)

  20. Prediction of Fission Product Release during the LOFC Experiments at the HTTR

    International Nuclear Information System (INIS)

    Shi, D.; Xhonneux, A.; Verfondern, K.; Ueta, S.; Allelein, H.-J.

    2014-01-01

    Demonstration tests were conducted using the High Temperature Engineering Test Reactor (HTTR) in Oarai, Japan, to confirm the safety of HTGR technologies and assure the expected physical phenomena to occur under given conditions. As part of the OECD directed LOFC (“loss of forced cooling”) project, a series of three tests at the HTTR has been planned with tripping of all gas circulators while deactivating all reactor reactivity control to disallow reactor scram due to abnormal reduction of primary coolant flow rate. The tests fall into anticipated transient without scram (ATWS) with occurrence of reactor recriticality. They serve the important purpose to provide a valuable data base for the validation of computer models regarding neutronics, heat transfer and fluid dynamics, fuel performance and fission product transport and release behavior in HTGRs. The Source Term Analysis Code System (STACY) is a new code development at the Research Center Jülich encompassing the original verified and validated computer models for simulating fission product transport and release. For verification of the modernized and extended version, it was assured that results obtained with the original tools could be reproduced. One of the new features of STACY is its ability to also treat fuel compacts of (full) cylindrical or annular shape and a complete prismatic block reactor core, respectively, supposed sufficient input data be available. The paper will describe the new STACY tool and present the results of fission product behavior in the HTTR core under the LOFC test conditions. Calculations are based on time-dependent neutronics and fluid dynamics results obtained with the Serpent and MGT models. (author)

  1. Mesopelagic Prokaryotes Alter Surface Phytoplankton Production during Simulated Deep Mixing Experiments in Eastern Mediterranean Sea Waters

    Directory of Open Access Journals (Sweden)

    Or Hazan

    2018-01-01

    Full Text Available Mesopelagic prokaryotes (archaea and bacteria, which are transported together with nutrient-rich intermediate-water to the surface layer by deep convection in the oceans (e.g., winter mixing, upwelling systems, can interact with surface microbial populations. This interaction can potentially affect production rates and biomass of surface microbial populations, and thus play an important role in the marine carbon cycle and oceanic carbon sequestration. The Eastern Mediterranean Sea (EMS is one of the most oligotrophic and warm systems in the world's oceans, with usually very shallow winter mixing (<200 m and lack of large-size spring algal blooms. In this study, we collected seawater (0–1,500 m in 9 different cruises at the open EMS during both the stratified and the mixed seasons. We show that the EMS is a highly oligotrophic regime, resulting in low autotrophic biomass and primary productivity and relatively high heterotrophic prokaryotic biomass and production. Further, we simulated deep water mixing in on-board microcosms using Levantine surface (LSW, ~0.5 m and intermediate (LIW, ~400 m waters at a 9:1 ratio, respectively and examined the responses of the microbial populations to such a scenario. We hypothesized that the LIW, being nutrient-rich (e.g., N, P and a “hot-spot” for microbial activity (due to the warm conditions that prevail in these depths, may supply the LSW with not only key-limiting nutrients but also with viable and active heterotrophic prokaryotes that can interact with the ambient surface microbial population. Indeed, we show that LIW heterotrophic prokaryotes negatively affected the surface phytoplankton populations, resulting in lower chlorophyll-a levels and primary production rates. This may be due to out-competition of phytoplankton by LIW populations for resources and/or by a phytoplankton cell lysis via viral infection. Our results suggest that phytoplankton in the EMS may not likely form blooms, even after

  2. Production of composite neutral Higgs bosons in photoproduction and e+e- experiments

    International Nuclear Information System (INIS)

    Whisnant, K.; Young, B.; Hu, S.

    1985-01-01

    We examine the consequences of a sizable tree-level coupling of a neutral Higgs boson to two photons, which could exist in composite models where the intermediate vector bosons and scalar Higgs bosons are made of the same subconstituents. We find that for certain ranges of the coupling strength and Higgs-boson mass, a neutral composite Higgs boson can be produced and detected in photon-proton scattering and e + e - annihilation at currently accessible energies. We also discuss other processes that are not present in the standard model at the tree level, but may lead to observable neutral-Higgs-boson production at, for instance, a p-barp collider

  3. US/UK actinides experiment at the Dounreay PFR. I. Fission products

    International Nuclear Information System (INIS)

    Raman, S.; Murphy, B.D.

    1995-01-01

    The United States and the United Kingdom have been engaged in a joint research program in which samples of higher actinides were irradiated in the 600-MW Dounreay Prototype Fast Reactor in Scotland. Analytical results using mass spectrometry and radiometry for actinides and fission products are now available for the samples in Fuel Pins 1 and 2 which were irradiated for 63 full-power days and for the samples in Fuel Pin 4 which were irradiated for 492 full-power days. Results from these three fuel pins are providing estimates of integral cross sections and fission yields. (authors)

  4. Production experience and performance for ATLAS data processing on a Cray XC-50 at CSCS

    CERN Document Server

    Sciacca, Francesco Giovanni; The ATLAS collaboration

    2018-01-01

    Predictions for requirements for the LHC computing for Run 3 and for Run 4 (HL_LHC) over the course of the next 10 years, show a considerable gap between required and available resources, assuming budgets will globally remain flat at best. This will require some radical changes to the computing models for the data processing of the LHC experiments. The use of large scale computational resources at HPC centres worldwide is expected to increase substantially the cost-efficiency of the processing. In order to pave the path towards the HL-LHC data processing, the Swiss Institute of Particle Physics (CHIPP) has taken the strategic decision to migrate the processing of all the Tier-2 workloads for ATLAS and other LHC experiments from a dedicated x86_64 cluster that has been in continuous operation and evolution since 2007, to Piz Daint, the current European flagship HPC, which ranks third in the TOP500 at the time of writing. We report on the technical challenges and solutions adopted to migrate to Piz Daint, and o...

  5. An Experiment to Study Beauty Production and Lifetime in the Upgraded $\\Omega^{'}$ Spectrometer

    CERN Multimedia

    2002-01-01

    The aim of this experiment is to detect Beauty particles decaying in nuclear emulsion and to measure their lifetime.\\\\ \\\\ The principle of the experiment is to discriminate the interactions producing Beauty particles from the general background of hadronic interactions by looking at the dominant decay mode B @A C + X whose branching ratio is expected to be larger than 50\\%.\\\\ \\\\ A special charm decay detector consisting in two multilayer silicon telescopes has been designed and successfully tested in a 85 GeV/c hadron beam. This device allows the detection of a decay taking place in the gap between the two telescopes by measuring the variation in charged particle multiplicity from the first to the second one. This measurement is used at the trigger level or in off-line analysis. \\\\ \\\\ A vertex detector, consisting in three doublets of silicon-microstrip detectors with a pitch of 50 @mm and two small time-projection chambers, is placed between the charm decay detector and the @W' spectrometer. Its purpose is t...

  6. Experiences of multidisciplinary development team members during user-centered design of telecare products and services: a qualitative study.

    Science.gov (United States)

    Vermeulen, Joan; Verwey, Renée; Hochstenbach, Laura M J; van der Weegen, Sanne; Man, Yan Ping; de Witte, Luc P

    2014-05-19

    User-centered design (UCD) methodologies can help take the needs and requirements of potential end-users into account during the development of innovative telecare products and services. Understanding how members of multidisciplinary development teams experience the UCD process might help to gain insight into factors that members with different backgrounds consider critical during the development of telecare products and services. The primary objective of this study was to explore how members of multidisciplinary development teams experienced the UCD process of telecare products and services. The secondary objective was to identify differences and similarities in the barriers and facilitators they experienced. Twenty-five members of multidisciplinary development teams of four Research and Development (R&D) projects participated in this study. The R&D projects aimed to develop telecare products and services that can support self-management in elderly people or patients with chronic conditions. Seven participants were representatives of end-users (elderly persons or patients with chronic conditions), three were professional end-users (geriatrician and nurses), five were engineers, four were managers (of R&D companies or engineering teams), and six were researchers. All participants were interviewed by a researcher who was not part of their own development team. The following topics were discussed during the interviews: (1) aim of the project, (2) role of the participant, (3) experiences during the development process, (4) points of improvement, and (5) what the project meant to the participant. Experiences of participants related to the following themes: (1) creating a development team, (2) expectations regarding responsibilities and roles, (3) translating user requirements into technical requirements, (4) technical challenges, (5) evaluation of developed products and services, and (6) valorization. Multidisciplinary team members from different backgrounds often

  7. Derived Physics Data Production in ATLAS: Experience with Run 1 and Looking Ahead (proceedings)

    CERN Document Server

    Laycock, P; The ATLAS collaboration; Beckingham, M; Henderson, R; Zhou, L

    2014-01-01

    While a significant fraction of ATLAS physicists directly analyse the AOD (Analysis Object Data) produced at the CERN Tier 0, a much larger fraction have opted to analyse data in a flat ROOT format. The large scale production of this Derived Physics Data (DPD) format must cater for both detailed performance studies of the ATLAS detector and object reconstruction, as well as higher level and generally lighter-content physics analysis. The delay between data-taking and DPD production allows for software improvements, while the ease of arbitrarily defined skimming/slimming of this format results in an optimally performant format for end-user analysis. Given the diversity of requirements, there are many flavours of DPDs, which can result in large peak computing resource demands. While the current model has proven to be very flexible for the individual groups and has successfully met the needs of the collaboration, the resource requirements at the end of Run 1 are much larger than planned. In the near future, ATLA...

  8. Experience with LHC Magnets from Prototyping to Large Scale Industrial Production and Integration

    CERN Multimedia

    Rossi, L

    2004-01-01

    The construction of the LHC superconducting magnets is approaching its half way to completion. At the end of 2003, main dipoles cold masses for more than one octant were delivered; meanwhile the winding for the second octant was almost completed. The other large magnets, like the main quadrupoles and the insertion quadrupoles, have entered into series production as well. Providing more than 20 km of superconducting magnets, with the quality required for an accelerator like LHC, is an unprecedented challenge in term of complexity that has required many steps from the construction of 1 meterlong magnets in the laboratory to today’s production of more than one 15 meter-long magnet per day in Industry. The work and its organization is made even more complex by the fact that CERN supplies most of the critical components and part of the main tooling to the magnet manufacturers, both for cost reduction and for quality issues. In this paper the critical aspects of the construction will be reviewed and the actual ...

  9. Time and temperature dependence of cascade induced defect production in in situ experiments and computer simulation

    International Nuclear Information System (INIS)

    Ishino, Shiori

    1993-01-01

    Understanding of the defect production and annihilation processes in a cascade is important in modelling of radiation damage for establishing irradiation correlation. In situ observation of heavy ion radiation damage has a great prospect in this respect. Time and temperature dependence of formation and annihilation of vacancy clusters in a cascade with a time resolution of 30 ms has been studied with a facility which comprises a heavy ion accelerator and an electron microscope. Formation and annihilation rates of defect clusters have been separately measured by this technique. The observed processes have been analysed by simple kinetic equations, taking into account the sink effect of surface and the defect clusters themselves together with the annihilation process due to thermal emission of vacancies from the defect clusters. Another tool to study time and temperature dependence of defect production in a cascade is computer simulation. Recent results of molecular dynamics calculations on the temperature dependence of cascade evolution are presented, including directional and temperature dependence of the lengths of replacement collision sequences, temperature dependence of the process to reach thermal equilibrium and so on. These results are discussed under general time frame of radiation damage evolution covering from 10 -15 to 10 9 s, and several important issues for the general understanding have been identified. (orig.)

  10. Leading experience of reaching high labor productivity in the stoping face using grader extraction

    Energy Technology Data Exchange (ETDEWEB)

    Chikh, M P

    1982-01-01

    The main factors which hold back highly productive work are high labor intensity of reinforcing the terminal sections of the longwalls, difference in the speed characteristics of the worm and longwall conveyers, jamming of the worm conveyers, holdups in transportation, etc. Consequently under the leadership of the party and trade union organizations, organizational technical measures were developed and are constantly being improved. Shift working meetings are held at which specific solutions are adopted. In order to improve load on the face, specific measures were adopted: measures are regularly developed for maintenance and repair of the stoping face equipment; a cartogram of repair-technical operations is compiled for the longwall; the velocity of the worm conveyers is brought to the velocity of the longwall conveyer, on the scraper conveyers in the conveyer galleries the edge is increased to 0.6 m; supply of electricity to the grader and conveyer in the longwall is done by individual substations; the efficiency experts of the mines have developed and introduced an improved design of belt loader at the loading point; in order to repair equipment on off days, a special group of highly skilled mechanics has been created. Introduction of these measures together will make it possible to improve coal extraction, labor productivity, labor efficiency, reduce accident rate, reveal latent reserves. Practice has indicated that the use of the grader units with mechanized timbering IMKS makes it possible to achieve high technical-economic indicators both of the work of the brigade and the mine as a whole.

  11. Study of strange particle production in jets with the ALICE experiment at the LHC

    CERN Document Server

    AUTHOR|(CDS)2082140; Kuhn, Christian

    Quark–gluon plasma is a state of matter existing under extreme energy densities and temperatures where quarks and gluons are deconfined. Complex phenomena occurring in the plasma emerge from the strong interaction of its constituents. This hot and dense strongly interacting matter can be created in ultra-relativistic heavy-ion collisions and its properties can be studied by measuring particles produced in the collisions. Partons produced in hard scatterings interact with the medium which modifies the production of particles in jets. Measurements of spectra of identified particles produced in jets represent an important tool for understanding the interplay of various hadronization mechanisms which contribute to the particle production in the medium created in heavy-ion collisions. In this thesis, we present the measurement of the $p_\\text{T}$ spectra of Λ baryons and $\\text{K}^{\\text{0}}_{\\text{S}}$ mesons produced in charged jets in central Pb–Pb collisions at the energy $\\sqrt{s_{\\text{NN}}} = 2.76\\ \\te...

  12. Recent developments in the production of liquid fuels via catalytic conversion of microalgae: experiments and simulations

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Fan; Wang, Pin; Duan, Yuhua; Link, Dirk; Morreale, Bryan

    2012-01-01

    Due to continuing high demand, depletion of non-renewable resources and increasing concerns about climate change, the use of fossil fuel-derived transportation fuels faces relentless challenges both from a world markets and an environmental perspective. The production of renewable transportation fuel from microalgae continues to attract much attention because of its potential for fast growth rates, high oil content, ability to grow in unconventional scenarios, and inherent carbon neutrality. Moreover, the use of microalgae would minimize ‘‘food versus fuel’’ concerns associated with several biomass strategies, as microalgae do not compete with food crops in the food chain. This paper reviews the progress of recent research on the production of transportation fuels via homogeneous and heterogeneous catalytic conversions of microalgae. This review also describes the development of tools that may allow for a more fundamental understanding of catalyst selection and conversion processes using computational modelling. The catalytic conversion reaction pathways that have been investigated are fully discussed based on both experimental and theoretical approaches. Finally, this work makes several projections for the potential of various thermocatalytic pathways to produce alternative transportation fuels from algae, and identifies key areas where the authors feel that computational modelling should be directed to elucidate key information to optimize the process.

  13. Control of algal production in a high rate algal pond: investigation through batch and continuous experiments.

    Science.gov (United States)

    Derabe Maobe, H; Onodera, M; Takahashi, M; Satoh, H; Fukazawa, T

    2014-01-01

    For decades, arid and semi-arid regions in Africa have faced issues related to water availability for drinking, irrigation and livestock purposes. To tackle these issues, a laboratory scale greywater treatment system based on high rate algal pond (HRAP) technology was investigated in order to guide the operation of the pilot plant implemented in the 2iE campus in Ouagadougou (Burkina Faso). Because of the high suspended solids concentration generally found in effluents of this system, the aim of this study is to improve the performance of HRAPs in term of algal productivity and removal. To determine the selection mechanism of self-flocculated algae, three sets of sequencing batch reactors (SBRs) and three sets of continuous flow reactors (CFRs) were operated. Despite operation with the same solids retention time and the similarity of the algal growth rate found in these reactors, the algal productivity was higher in the SBRs owing to the short hydraulic retention time of 10 days in these reactors. By using a volume of CFR with twice the volume of our experimental CFRs, the algal concentration can be controlled during operation under similar physical conditions in both reactors.

  14. Design of a full scale model fuel assembly for full power production reactor flow excursion experiments

    International Nuclear Information System (INIS)

    Nash, C.A.; Blake, J.E.; Rush, G.C.

    1990-01-01

    A novel full scale production reactor fuel assembly model was designed and built to study thermal-hydraulic effects of postulated Savannah River Site (SRS) nuclear reactor accidents. The electrically heated model was constructed to simulate the unique annular concentric tube geometry of fuel assemblies in SRS nuclear production reactors. Several major design challenges were overcome in order to produce the prototypic geometry and thermal-hydraulic conditions. The two concentric heater tubes (total power over 6 MW and maximum heat flux of 3.5 MW/m 2 ) (1.1E+6 BTU/(ft 2 hr)) were designed to closely simulate the thermal characteristics of SRS uranium-aluminum nuclear fuel. The paper discusses the design of the model fuel assembly, which met requirements of maintaining prototypic geometric and hydraulic characteristics, and approximate thermal similarity. The model had a cosine axial power profile and the electrical resistance was compatible with the existing power supply. The model fuel assembly was equipped with a set of instruments useful for code analysis, and durable enough to survive a number of LOCA transients. These instruments were sufficiently responsive to record the response of the fuel assembly to the imposed transient

  15. The search for possible time variations in Davis' measurements of the argon production rate in the solar neutrino experiment

    International Nuclear Information System (INIS)

    Haubold, H.J.; Gerth, E.

    1985-01-01

    With the gradual accumulation of experimental data in the solar neutrino experiment of Davis and collaborators (runs 18-74 for 1970-1982), the question, whether there are time variations of the solar neutrino flux, is of renewed interest. We discuss the mathematical-numerical methods applied to the statistical analysis of Davis' argon-37 production rate up till now known in the literature. These methods are characterized by the arbitrary arrangement of the Davis data in a time series. We perform a certain Fourier transformation for unequally-spaced time series of the measuring data of the argon-37 production rate, discuss the discovered periods and give significance criteria with respect to each period. We find that all periods discussed in the literature are contained in our series of periods. Pointing out the more mathematical character of the time series analysis we emphasize the predominant significance of the detected periods. (author)

  16. Usage of machine learning for the separation of electroweak and strong Zγ production at the LHC experiments

    Science.gov (United States)

    Petukhov, A. M.; Soldatov, E. Yu

    2017-12-01

    Separation of electroweak component from strong component of associated Zγ production on hadron colliders is a very challenging task due to identical final states of such processes. The only difference is the origin of two leading jets in these two processes. Rectangular cuts on jet kinematic variables from ATLAS/CMS 8 TeV Zγ experimental analyses were improved using machine learning techniques. New selection variables were also tested. The expected significance of separation for LHC experiments conditions at the second datataking period (Run2) and 120 fb-1 amount of data reaches more than 5σ. Future experimental observation of electroweak Zγ production can also lead to the observation physics beyond Standard Model.

  17. Open Bottom Production in Au+Au Collisions at s NN = 200 GeV with the STAR Experiment

    Science.gov (United States)

    Zhang, Shenghui

    In these proceedings, we present measurements of open bottom hadron production through multiple decay channels in Au+Au collisions at s NN = 200 GeV by the STAR experiment. Namely, measurements of nuclear modification factors for electrons, J/ψ, and D0 from open bottom hadron decays are shown. The decay products are topologically identified utilizing the Heavy Flavor Tracker, a silicon vertex detector installed at STAR during the period of 2014 - 2016. It enables precise reconstruction of displaced decay vertices. The results show large suppression for non-prompt J/ψ and non-prompt D0 at high transverse momenta, and indicate less suppression for electrons from bottom hadron decays than for those from charm hadron decays at ˜ 2σ significance level.

  18. Precision measurements of the top quark pair production cross section in the single lepton channel with the ATLAS experiment

    International Nuclear Information System (INIS)

    Heinrichs, Anna Christine

    2012-01-01

    Two precision measurements of the top quark pair production cross section in the lepton+jets channel are accomplished using data taken by the ATLAS experiment at the Large Hadron Collider at CERN. The data corresponds to proton-proton collisions taken in 2010 and 2011 at a center-of-mass energy of 7 TeV. The measurement using data from 2010 achieves an overall uncertainty of 12%, while the measurement using 2011 data reaches a precision of 6.6%. Both measurements are in good agreement with theoretical predictions in the framework of the Standard Model of particle physics.

  19. Anaerobic co-digestion of canola straw and buffalo dung: optimization of methane production in batch experiments

    International Nuclear Information System (INIS)

    Sahito, A.R.; Brohi, K.M.

    2014-01-01

    In several regions of the Pakistan, crop cultivation is leading to the production crop residues and its disposal problems. It has been suggested that the co-digestion of the crop residues with the buffalo dung might be a disposal way for the wasted portion of the crops residue. The objective of present study was to optimize the anaerobic co-digestion of canola straw and the buffalo dung through batch experiments in order to obtain maximum methane production. The optimization was carried out in three stages. In first stage, the best canola straw to buffalo dung ratio was evaluated. In second stage, the best concentration of sodium hydrogen carbonate was assessedas the alkaline pretreatment chemical, whereas in the third stage most suitable particle size of the canola strawwas evaluated. The assessment criteria for the optimization of a co-digestion were cumulative methane production and ABD (Anaerobic Biodegradability). The results yield that anaerobic co-digestibility of the canola straw and the buffalo dung is obviously influenced by all the three factors of optimization. The maximum methane production was obtained as 911 NmL from the canola straw to buffalo dung ratio of 40:60, the alkaline doze of 0.6 gNaHCO/sub 3/ gVS and canola straw particle size of 2mm. However, because of the higher shredding cost to produce 2mm sized canola straw, particle size 4mm could be the best canola straw particle size. (author)

  20. Anaerobic Co-Digestion of Canola Straw and Buffalo Dung: Optimization of Methane Production in Batch Experiments

    Directory of Open Access Journals (Sweden)

    Abdul Razaque Sahito

    2014-01-01

    Full Text Available In several regions of the Pakistan, crop cultivation is leading to the production crop residues and its disposal problems. It has been suggested that the co-digestion of the crop residues with the buffalo dung might be a disposal way for the wasted portion of the crops' residue. The objective of present study was to optimize the anaerobic co-digestion of canola straw and the buffalo dung through batch experiments in order to obtain maximum methane production. The optimization was carried out in three stages. In first stage, the best canola straw to buffalo dung ratio was evaluated. In second stage, the best concentration of sodium hydrogen carbonate was assessedas the alkaline pretreatment chemical, whereas in the third stage most suitable particle size of the canola strawwas evaluated. The assessment criteria for the optimization of a co-digestion were cumulative methane production and ABD (Anaerobic Biodegradability. The results yield that anaerobic co-digestibility of the canola straw and the buffalo dung is obviously influenced by all the three factors of optimization. The maximum methane production was obtained as 911 NmL from the canola straw to buffalo dung ratio of 40:60, the alkaline doze of 0.6 gNaHCO3 / gVS and canola straw particle size of 2mm. However, because of the higher shredding cost to produce 2mm sized canola straw, particle size 4mm could be the best canola straw particle size.

  1. A fast algorithm for determining bounds and accurate approximate p-values of the rank product statistic for replicate experiments.

    Science.gov (United States)

    Heskes, Tom; Eisinga, Rob; Breitling, Rainer

    2014-11-21

    The rank product method is a powerful statistical technique for identifying differentially expressed molecules in replicated experiments. A critical issue in molecule selection is accurate calculation of the p-value of the rank product statistic to adequately address multiple testing. Both exact calculation and permutation and gamma approximations have been proposed to determine molecule-level significance. These current approaches have serious drawbacks as they are either computationally burdensome or provide inaccurate estimates in the tail of the p-value distribution. We derive strict lower and upper bounds to the exact p-value along with an accurate approximation that can be used to assess the significance of the rank product statistic in a computationally fast manner. The bounds and the proposed approximation are shown to provide far better accuracy over existing approximate methods in determining tail probabilities, with the slightly conservative upper bound protecting against false positives. We illustrate the proposed method in the context of a recently published analysis on transcriptomic profiling performed in blood. We provide a method to determine upper bounds and accurate approximate p-values of the rank product statistic. The proposed algorithm provides an order of magnitude increase in throughput as compared with current approaches and offers the opportunity to explore new application domains with even larger multiple testing issue. The R code is published in one of the Additional files and is available at http://www.ru.nl/publish/pages/726696/rankprodbounds.zip .

  2. Drought, Endurance and Climate Change 'Pioneers': Lived Experience in the Production of Rural Environmental Knowledge

    Directory of Open Access Journals (Sweden)

    Deb Anderson

    2010-03-01

    Full Text Available This article explores the politicisation of environmental knowledge on rural Australia, in an analysis of discourse on the lived experience of drought. It draws on research conducted in dryland farm communities in the Mallee wheat-belt of Victoria – where rural histories have presented spirited sagas of community perseverance in ‘battling’ a harsh climate – during a period of marked shift in public awareness of climate change (2004-07. Indeed climate change projections have intensified debate over rural futures in Australia, where droughts have played a powerful role in the mythologizing of rural battlers and landscapes, and where drought discourse has been dominated by the language of war. Cultural engagement with climate is, however, under constant renegotiation, as rural cultural research is apt to reveal.

  3. Polish Acadaemy of Sciences Positronium for Antihydrogen Production in the AEGIS Experiment

    CERN Document Server

    Consolati, G; Amsler, C; Bonomi, G; Brusa, R S; Caccia, M; Caravita, R; Castelli, F; Cerchiari, G; Comparat, D; Demetrio, A; Di Noto, L; Doser, M; Evans, C; Fanì, M; Ferragut, R; Fesel, J; Fontana, A; Gerber, S; Giammarchi, M; Gligorova, A; Guatieri, F; Haider, S; Hinterberger, A; Holmestad, H; Kellerbauer, A; Khalidova, O; Krasnicky, D; Lagomarsino, V; Lansonneur, P; Lebrun, P; Malbrunot, C; Mariazzi, S; Marton, J; Matveev, V; Mazzotta, Z; Müller, S R; Nebbia, G; Nedelec, P; Oberthaler, M; Pacifico, N; Pagano, D; Penasa, L; Petracek, V; Prelz, F; Prevedelli, M; Ravelli, L; Rienaecker, B; Robert, J; Røhne, O M; Rotondi, A; Sandaker, H; Santoro, R; Smestad, L; Sorrentino, F; Testera, G; Tietje, I C; Widmann, E; Yzombard, P; Zimmer, C; Zmeskal, J; Zurlo, N

    2017-01-01

    The primary goal of the Antihydrogen Experiment: Gravity, Interferometry, Spectroscopy (AEGIS) collaboration is to measure for the first time precisely the gravitational acceleration of antihydrogen, H¯ , a fundamental issue of contemporary physics, using a beam of antiatoms. Indeed, although indirect arguments have been raised against a different acceleration of antimatter with respect to matter, nevertheless some attempts to formulate quantum theories of gravity, or to unify gravity with the other forces, consider the possibility of a non-identical gravitational interaction between matter and antimatter. We plan to generate H¯ through a charge-exchange reaction between excited Ps and antiprotons coming from the Antiproton Decelerator facility at CERN. It offers the advantage to produce sufficiently cold antihydrogen to make feasible a measurement of gravitational acceleration with reasonable uncertainty (of the order of a few percent). Since the cross-section of the above reaction increases with n 4 , n b...

  4. Study of charm production through the decay of B mesons in the BABAR experiment; Etude de la production de charme dans les desintegrations des mesons beaux avec l'experience BABAR

    Energy Technology Data Exchange (ETDEWEB)

    Couderc, F

    2005-04-15

    The BABAR experiment, located at SLAC (Stanford, California), has been dedicated, since 1999, to the study of B meson decays produced in electron positron collisions with an energy in the center of mass frame equal to the mass of {epsilon}(4S) resonance. In this experiment, the charged particles identification is provided, in particular by the measurement of the energy loss per length unit in the drift chamber. In order to improve the calibration of this quantity, a selection of electrons/positrons from radiative Bhabha events was performed; with the new sample the charge asymmetry in the charged particles reconstruction was reduced. In B meson decays, the inclusive production of charmed particles (D{sup 0}, D{sup 0}-bar, D{sup {+-}}, D{sub s}{sup {+-}}, {lambda}{sub c}{sup {+-}}) is measured with a new analysis method, made possible by the large statistics accumulated by the BABAR experiment. B and B-bar mesons are produced simultaneously from the {epsilon}(4S) resonance. The events are selected by reconstructing completely one B in a hadronic channel. Charmed particles from the other B are then reconstructed with the remaining tracks. This enables the measurement of the total number of charm produced in B{sup +} and in B{sup 0} decays separating the correlated charm production (quark transitions: b {yields} cX) from the anti-correlated production (quark transitions: b {yields} c-bar X). The results obtained on an integrated luminosity of 210 fb{sup -1} are the following: N{sub c}{sup B{sup +}} = 0.970 {+-} 0.042; N{sub c-}bar{sup B{sup +}} 0.262 {+-} 0.034; N{sub c}{sup B{sup 0}} = 0.950 {+-} 0.057; N{sub c-}bar{sup B{sup 0}} 0.285 {+-} 0.048. This new method also allows the measurement of the momentum of the charmed particles in the B rest frame. Access to the different production mechanisms of these particles is thereby provided. (author)

  5. Direct photon production in Pb-Pb collisions at the LHC with the ALICE experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bock, Friederike [Physikalisches Institut, Heidelberg University (Germany); Lawrence Berkeley National Laboratory, Berkeley (United States)

    2015-07-01

    Unlike hadrons, direct photons are produced in all stages of a nucleus-nucleus collision and therefore test our understanding of the space-time evolution of the produced medium. Of particular interest are so-called thermal photons expected to be produced in a quark-gluon plasma and the subsequent hadron gas. The transverse momentum spectrum of thermal photons carries information about the temperature of the emitting medium. In this presentation, direct-photon spectra from Pb-Pb collisions at √(s{sub NN}) = 2.76 TeV and p-Pb collisions at √(s{sub NN}) = 5.02 TeV are shown. The results were obtained by measuring e{sup +}e{sup -} pairs from external conversions of photons in the detector material. The measured direct-photon spectra are compared with predictions from state-of-the-art hydrodynamic models. In the standard hydrodynamical modeling of nucleus-nucleus collisions, thermal photons mostly come from the early hot stage of the collision. As collective hydrodynamic flow needs time to build up, the azimuthal anisotropy of thermal photons quantified with the Fourier coefficient v{sub 2} is expected to be smaller than the one for hadrons. However, the PHENIX experiment and ALICE experiment observed v{sub 2} values of direct-photons similar in magnitude to the pion v{sub 2}. We present the inclusive photon v{sub 2} and v{sub 3} in Pb-Pb collisions at √(s{sub NN}) = 2.76 TeV and discuss implications for the v{sub 2} and v{sub 3} of direct-photons.

  6. Gamma and X-rays Production for Experiments at ELSA Facility

    CERN Document Server

    Lemaire, J

    2004-01-01

    The ELSA facility is a high brightness 18 MeV electron source dedicated to electron radiation, gamma-rays and picosecond hard and soft X-rays. It consists of a 144 MHz RF photoinjector producing short bunches which are further accelerated to a final energy varying from 2 to 18 MeV thanks to three 433 MHz RF cavities. Former beam compression design used a half turn magnet compressor system. It has been recently replaced by a double alpha magnet compressor. Electron beams are now delivered to a new experimental room. We present the new panel of interests offered by this facility in term of gamma-ray and X-ray production.

  7. Production of lepton pairs with associated final state: project of an experiment

    International Nuclear Information System (INIS)

    Brom, J.-M.

    1978-01-01

    The production of Drell-Yan pairs is studied, in reactions like h+h→1 + 1 - +X---, where the charged part of the associated final state is detected. The first part presents some theoretical aspects, relative to the Drell-Yan mechanism and to models dealing with the associated final state. The second part presents a possible experimental set-up in order to study this physics, based on vertex detection with fast electronic detectors, and makes estimations for the expected number of events. In the last part, is evaluated the pattern recognition program of the events where one pair of leptons is detected. The recognition program is analysed and presented its performance [fr

  8. Measurement of $Z$ boson production in Pb+Pb and $pp$ collisions by the ATLAS experiment

    CERN Document Server

    Dumancic, Mirta; The ATLAS collaboration

    2018-01-01

    A measurement of $Z$ boson production is performed via the muon decay channel using data samples from the 2015 LHC run obtained at the center-of-mass energy of $\\sqrt{s_{_{\\rm{NN}}}}=5.02$ TeV with a total integrated luminosity of 0.49 nb$^{-1}$ and 25.3 pb$^{-1}$ in Pb+Pb and $pp$, respectively. Integrated and rapidity differential cross sections are measured in a fiducial detector acceptance defined by the $Z$ boson selection of 66<$m_{ll}$<116 GeV and $|y^{ll}|<2.5$ with correction for FSR effects. Nuclear modification factor $R_{AA}$ is obtained from the comparison of the Pb+Pb to the $pp$ data and is found to be consistent with unity. The large statistical sample of Pb+Pb collisions also allows a high-precision test of the Glauber model.

  9. International Training Centre, WNU — School of Uranium Production (Three Years Experience)

    Energy Technology Data Exchange (ETDEWEB)

    Trojáček, J., E-mail: trojacek@diamo.cz [WNU-SUP. DIAMO, Straz pod Ralskem (Czech Republic)

    2014-05-15

    Following a joint meeting of the IAEA, OECD/NEA Uranium Group and the World Nuclear Association, in 2004 the shortage of skilled professional staff to support the expansion of the global uranium industry was a major topic of discussion. As a consequence of the concerns expressed at that meeting, in 2006 the World Nuclear University-School of Uranium Production was set up with the cooperation of the DIAMO State Enterprise at their site in the Czech Republic. The facility is now up and running and provides a range of technical training activities to help strengthen the skills base amongst all uranium producing countries, both current and future. The paper describes the history of the school so far and the range of activities on offer. (author)

  10. Unconventional gas experience at El Paso Production Company : tapping into deep, tight gas and coalbed methane

    International Nuclear Information System (INIS)

    Bartley, R.L.

    2003-01-01

    The current conditions in the natural gas industry were reviewed, from the excellent current and projected energy prices to low activity and rig count. Various graphs were presented, depicting total proved dry gas reserves and annual production over time for the Gulf of Mexico, including its continental shelf, the Texas coastal plains, and the United States lower 48. Offshore growth of unconventional gas was also displayed. The key elements of the strategy were also discussed. These included: (1) earnings driven, (2) superior science, (3) innovative application of technology, (4) ability to act quickly and decisively, (5) leadership, management, and professional development, and (6) achieve learning curve economics. The core competencies were outlined along with recent discoveries in South Texas and the Upper Gulf Coast. figs

  11. Experiences with local power production at the end-user (case studies)

    International Nuclear Information System (INIS)

    Morch, Andrei Z.; Grinden, Bjoern; Fleten, Stein-Erik; Maribu, Karl Magnus; Johansen, Boerre; Vanebo, Torstein; Berner, Monica; Stang, Jacob; Naesje, Paal

    2004-12-01

    This report describes the results of case studies performed as part of the project 'Local power production at the end-user'. It was found that the construction of a power plant, even a small one, is not an easy task. It is important to exploit the resources optimally and to allow for many income and cost elements in calculating the profitability. It may therefore be worth while to consult qualified assistance at an early stage during the planning of such construction projects. It is also found that there are clear scale effects in the development of small power plants, that is, the relative costs (NOK/kWh) are larger for small plants than for bigger ones. This is true of both investment costs and operation costs. This will affect the profitability. Of 16 plants, there is enough data for analysing 15, although estimates must be used instead of real data where the latter is missing. For eight of the 15, the net present value is positive at a power price of 25 oere/kWh, 6% discount rate and 15-20 years lifetime. For the other plants it will be more economical to wait until the market price of power rises. The price that is necessary to make these plants profitable varies from 32 to 45 oere/kWh. Basically it is assumed that the developer of small power plants (up to 10 MW) wants to produce as much energy (kWh) as possible from the plant, both to cover his own consumption and to sell surplus energy to the power market. However, there is an economically interesting market for power (kW), in which the producer (over 25 MW) is paid for being ready to start production on short notice

  12. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  13. Production and muonic decay of the intermediate vector boson Z0 in the UA1-experiment

    International Nuclear Information System (INIS)

    Leuchs, R.

    1988-01-01

    In this thesis the production of the z 0 in proton-antiproton collisions and the subsequent decay of the Z - 0 into two muons is experimentally studied. I was first responsible for the faultless readout of the muon detector. In the analysis I have first selected the Z 0 data of the runs of 1984 and 1985, as well as determined the efficiency of this selection. Furthermore I have collaborated in the establishment of the p t μ > 15 GeV/c selection. In the following the Z 0 sample was examined on completeness and the background calculated again. At c.m. energies of √S = 546 GeV and √S = 630 GeV in the whole 21 Z 0 events were identified by their muonic decay. The analysis of the data yielded the following essential results: M Z = 90.7 -4.8 +5.2 (stat.)±3.2(syst.) GeV/c 2 . From the asymmetry of the muon angular distribution we calculate the electroweak mixing angle to sin 2θ W = 0.24 -0.04 +0.05 . The mixing can be better determined from the ratio of the W ± and Z 0 masses. In the muon channel we obtain sin 2 θ W = 0.187±0.148(stat.)±0.033(syst.). If the weak mixing angle is given from the mass ratio the ρ parameter can be calculated. In the muon channel we obtain ρ = 1.05±0.16(stat.)±0.05(syst.). The measured cross sections of (σ.B) μ 546 GeV = 98.4±49.8(stat.)±19.9(syst) and (σ.B) μ 630 Gev = 65.9±17.2(stat.)±10.9(syst) are compatible with the prediction of the Drell-Yan production mechanism. From the ratio of the cross sections the number of the light neutrino generations N ν can be limited to above. With 90% confidence N ν 0 further heavy vector bosons below a mass of 173 GeV/c 2 are excluded. (orig./HSI) [de

  14. Experiences with the GLUE information schema in the LCG/EGEE production grid

    International Nuclear Information System (INIS)

    Burke, S; Andreozzi, S; Field, L

    2008-01-01

    A common information schema for the description of Grid resources and services is an essential requirement for interoperating Grid infrastructures, and its implementation interacts with every Grid component. In this context, the GLUE information schema was originally defined in 2002 as a joint project between the European DataGrid and DataTAG projects and the US iVDGL. The schema has major components to describe Computing and Storage Elements, and also generic Service and Site information. It has been used extensively in the LCG/EGEE Grid, for job submission, data management, service discovery and monitoring. In this paper we present the experience gained over the last five years, highlighting both successes and problems. In particular, we consider the importance of having a clear definition of schema attributes; the construction of standard information providers and difficulties encountered in mapping an abstract schema to diverse real systems; the configuration of publication in a way which suits system managers and the varying characteristics of Grid sites; the validation of published information; the ways in which information can be used (and misused) by Grid services and users; and issues related to managing schema upgrades in a large distributed system

  15. NACOWA experiments on LMFBR cover gas aerosols, heat transfer, and fission product enrichment

    International Nuclear Information System (INIS)

    Minges, J.; Schuetz, W.

    1993-12-01

    Fifteen different NACOWA test series were carried out. The following items were investigated: sodium mass concentration in the cover gas, sodium aerosol particle size, radiative heat transfer across the cover gas, total heat transfer across the cover gas, sodium deposition on the cover plate, temperature profiles across the cover gas, phenomena if the argon cover gas is replaced by helium, enrichment of cesium, iodine, and zinc in the aerosol and in the deposits. The conditions were mainly related to the design parameters of the EFR. According to the first consistent design, a pool temperature of 545 C and a roof temperature of only 120 C were foreseen at a cover gas height of 85 cm. The experiments were carried out in a stainless steel test vessel of 0.6 m diameter and 1.14 m height. Pool temperature (up to 545 C), cover gas height (12.5 cm, 33 cm, and others), and roof temperature (from 110 C to 450 C) were the main parameters. (orig./HP) [de

  16. Radiation Safety in Production of Y-90 from an electrochemical generator. CENTIS experience

    International Nuclear Information System (INIS)

    Ayra Pardo, Fernando Enrique

    2016-01-01

    From a project with the International Atomic Energy Agency, Isotope Center installation and commissioning began operating an electrochemical generator of Sr-90 / Y-90 inside a glove box shielded. The aim was to ensure the production of Y-90 needed in the research carried out in Cuba with this radionuclide for the medical industry. Associate at the beginning of this practice, compliance with all regulatory requirements approved in the country from the radiological point of view that demonstrated the safety of this for both operators and the general public became necessary. Using the MCNPX code generator installation was simulated and the equivalent dose Hp (10) were obtained for the operator: 6.27 mSv / y Hp (0.07): 17 mSv / a for a source of 10 Ci of 90 Sr- 90 Y . Also the use of TLD dosimeters similar to those used for gamma emitting radionuclides for controlling beta exposures was evaluated. high sensitivity lithium fluoride tablets couple energy beta particles of Y-90 which ensures its use for measuring the magnitude Hp (007) was demonstrated. two possible solutions for the recovery of liquid waste 90 Sr one another by distillation and ion exchange are evaluated. To transport the Y-90 may be used the package currently used in marketing the rest of the CENTIS radiopharmaceuticals. As a final result, the practice was approved and included in the Operating License Center Isotopes. (author)

  17. Practices of radiation sterilization of medical products and pharmaceutical preparations: egyptian experience

    International Nuclear Information System (INIS)

    Roushdy, H.M.

    1992-01-01

    Radiation sterilization involves the application of sufficient ionizing energy furnished by either x-rays, gamma-rays or accelerated electron beams, to render an article free of viable micro-organisms. The method offers a number of advantages which makes it an attractive choice in a number of situations: It is a suitable means of sterilizing many many materials.. Radiation causes no significant temperature rise, thus permits sterilization of heat-sensitive drugs and low melting-point plastics. It is certainly the best, and often the only method of sterilizing biological tissues and preparations of biological origin. due to its high penetrating ability, gamma-radiation reaches all parts of the object to be sterilized. The radiation sterilized products are not subjected to touching or exposure to the outside environment except by the and users. The chemical reactivity of radiation is relatively low as compared with the highly reactive gases. Radiation can be easily adapted for continuous processing as compared with batch operations currently in use with gas sterilization. The radiation process is the most reliable of all competing sterilization methods due to the obsolete certainty that the radiation source emits radiation of known energy and power

  18. Study of $K^{0}_{S}$ meson production in NA61 experiment at the CERN SP

    CERN Document Server

    Czopowicz, Tobiasz

    One of the main problems of heavy-ion physics is search for the quark-gluon plasma (QGP), study its properties and characteristics of the phase transition between hadron nuclear matter and the QGP. Existence of the QGP has been introduced by J. C. Collins and M. J. Perry in 1975 [1]. In the QGP quarks and gluons, fundamental constituents of known matter, are expected to appear as free particles. Outside the plasma they are always confined inside hadrons. Unfortunately the quark-gluon plasma can not be directly observed experimentally. However, there are certain phenomena that attest to its existence. These include strangeness production enhancement, suppression of J = , fluctuations and jet quenching. They allow to study properties the plasma. In 2008, the world’s most powerful particle accelerator – the LHC at CERN has been launched. In the nearest future it will be able to collide protons at the energy of up to 14 TeV per nucleon pair and lead ions at the maximum energy of 5.5 TeV per nucle...

  19. Practices of radiation sterilization of medical products and pharmaceutical preparations: egyptian experience

    Energy Technology Data Exchange (ETDEWEB)

    Roushdy, H M

    1993-12-31

    Radiation sterilization involves the application of sufficient ionizing energy furnished by either x-rays, gamma-rays or accelerated electron beams, to render an article free of viable micro-organisms. The method offers a number of advantages which makes it an attractive choice in a number of situations: It is a suitable means of sterilizing many many materials.. Radiation causes no significant temperature rise, thus permits sterilization of heat-sensitive drugs and low melting-point plastics. It is certainly the best, and often the only method of sterilizing biological tissues and preparations of biological origin. due to its high penetrating ability, gamma-radiation reaches all parts of the object to be sterilized. The radiation sterilized products are not subjected to touching or exposure to the outside environment except by the and users. The chemical reactivity of radiation is relatively low as compared with the highly reactive gases. Radiation can be easily adapted for continuous processing as compared with batch operations currently in use with gas sterilization. The radiation process is the most reliable of all competing sterilization methods due to the obsolete certainty that the radiation source emits radiation of known energy and power.

  20. W and Z production at $\\sqrt{s}$ = 7 TeV with the LHCb experiment

    CERN Document Server

    The LHCb Collaboration

    2011-01-01

    We have measured the $W$ and $Z$ boson production cross-sections in proton-proton collisions at a centre-of-mass energy of 7 TeV, using approximately 16.5 pb$^{-1}$ of data. The $W$ and $Z$ bosons are reconstructed from muons with transverse momentum $p_T$ exceeding 20 GeV, pseudorapidity $\\eta_{\\mu}$ within $2.0 - 4.5$., and, in the case of the \\zed, a dimuon invariant mass $m_{Z}$ in the range 81 $\\leq m_{Z} \\leq$ 101 GeV. We obtain: \\begin{align} \\sigma_{Z} (2.0 \\leq \\eta_{\\mu} \\leq4.5, p_T \\geq 20, 81 \\leq m_{Z} \\leq 101) = 73\\pm4\\pm7.3 \\textrm{ pb} ; &\\\\ \\sigma_{W+} (2.0 \\leq \\eta_{\\mu} \\leq 4.5, p_T \\geq 20) = 1007\\pm48\\pm101 \\textrm{ pb}; &\\\\ \\sigma_{W-} (2.0 \\leq \\eta_{\\mu} \\leq 4.5, p_T\\geq 20) = 680\\pm40\\pm68 \\textrm{ pb,} \\end{align} where the first error is statistical and systematic combined, and the second arises from the luminosity uncertainty. The $W$ and $Z$ cross-section ratios ($\\sigma_{W+}+\\sigma_{W-}$) / $\\sigma_{Z}$ and $\\sigma_{W+} / \\sigma_{W-}$, and the $W$ charge asymmetr...

  1. Occupational health experience in the production and distribution of radionuclides used in medicine

    International Nuclear Information System (INIS)

    Gaburo, J.C.; Sanches, M.P.; Gian, M.A.A.

    1994-01-01

    A brief description of the main operations performed in the Radioisotope Production Facility at IPEN-CNEN/SP is presented. This facility is provided with hot cells which must be periodically replaced due to deterioration by reagent processing and hard treatment to which they are submitted. When the lifetime of these hot cells are at their limit, leaking of airborne materials arises bringing forth incorporation by workers. As a safe control, a series of procedures have been implemented in a program of internal monitoring by urine sampling and external monitoring by film badge. From this program it became possible to evaluate the radiation dose received by workers. The results obtained within the last 10 years where analyzed against the lifetime of the hot cells and studies were made to verify possible explicit or implicit relations between doses and the natural stress of these hot cells. In the distribution of the effective dose equivalent among 304 workers submitted for individual monitoring of internal exposure by urine samples, some significant exposures higher than 4.5 mSv. The sum of effective doses and doses from external exposures can lead to levels close to regulatory limits. The internal effective dose equivalent is small when compared with whole body external dose equivalent, however it is not negligible

  2. Production of multi-strange hyperons and strange resonances in the NA49 experiment

    CERN Document Server

    Barton, R A; Anticic, T; Bächler, J; Barna, D; Barnby, L S; Bartke, Jerzy; Betev, L; Bialkowska, H; Billmeier, A; Blume, C; Blyth, C O; Boimska, B; Botje, M; Bracinik, J; Brady, F P; Bramm, R; Brun, R; Buncic, P; Carr, L; Cebra, D; Cooper, G E; Cramer, J G; Csató, P; Eckhardt, F; Ferenc, D; Filip, P; Fischer, H G; Fodor, Z; Foka, P Y; Freund, P; Friese, V; Ftácnik, J; Gál, J; Gazdzicki, M; Georgopoulos, G; Gladysz-Dziadus, E; Hegyi, S; Hlinka, V; Höhne, C; Igo, G; Ivanov, M; Jacobs, P; Janik, R; Jones, P G; Kadija, K; Kolesnikov, V I; Kollegger, T; Kowalski, M; Van Leeuwen, M; Lévai, Peter; Malakhov, A I; Margetis, S; Markert, C; Mayes, B W; Melkumov, G L; Mischke, A; Molnár, J; Nelson, J M; Odyniec, Grazyna Janina; Pálla, G; Panagiotou, A D; Petridis, A; Pikna, M; Pinsky, L; Poskanzer, A M; Prindle, D J; Pühlhofer, F; Reid, J G; Renfordt, R E; Retyk, W; Ritter, H G; Röhrich, D; Roland, C; Roland, G; Rybicki, A; Sammer, T; Sandoval, A; Sann, H; Schäfer, E; Schmitz, N; Seyboth, P; Siklér, F; Sitár, B; Skrzypczak, E; Snellings, R; Squier, G T A; Stock, Reinhard; Strmen, P; Ströbele, H; Susa, T; Szarka, I; Szentpétery, I; Sziklai, J; Toy, M; Trainor, T A; Trentalange, S; Varga, D; Vassiliou, Maria; Veres, G I; Vesztergombi, G; Voloshin, S A; Vranic, D; Wang, F; Weerasundara, D D; Wenig, S; Wetzler, A; Whitten, C; Xu, N; Yates, T A; Yoo, I K; Zimányi, J

    2001-01-01

    The NA49 large-acceptance hadron spectrometer has measured strange and multi-strange hadrons from Pb+Pb and p+p collisions at the CERN SPS. Preliminary results for the transverse mass and rapidity distributions for X and Xi /sup +/ from central Pb+Pb collisions at 158 GeV c/sup -1//nudeon are presented. Fully integrated yields per event of 4.42+or-0.31 and 0.74+0.04 are found for Xi /sup -/ and Xi /sup +/, respectively, leading to a 4 pi Xi /sup +// Xi /sup -/ ratio of 0.17+or-0.02. The ratio Xi /sup +// Xi /sup -/ at mid-rapidity is found to be 0.22+or-0.04, agreeing with previously published values. In addition, preliminary data on the Lambda (1520) and phi (1020) resonances are presented. The Lambda (1520) multiplicity for p+p collisions is found to be 0.012+or-0.003. No signal is observed for Pb+Pb collisions and a production upper limit of 1.36 Lambda (1520) per event indicates an apparent suppression when comparing with scaled p+p data. Integrated phi (1020) yields per event are found to be 7.6+or-1.1 f...

  3. Dust ablation laboratory experiments to measure the plasma and light production of meteoroids in the atmosphere

    Science.gov (United States)

    Sternovsky, Z.; DeLuca, M.; Janches, D.; Marshall, R. A.; Munsat, T.; Plane, J. M. C.; Horanyi, M.

    2017-12-01

    Radars play an important role in characterizing the distribution of meteoroids entering Earth's atmosphere, and they are sensitive to the size range where most of the mass input occurs. The interpretation of meteor radar measurements, however, is handicapped by the incomplete understanding of the microphysical processes relevant to meteoric ablation. A facility has been developed to simulate the ablation of small dust particles in laboratory conditions and to determine the most critical parameters. An electrostatic dust accelerator is used to generate iron, aluminum and meteoric analog particles with velocities of 1-70 km/s. The particles are then introduced into a cell filled with nitrogen, air, oxygen, or carbon dioxide gas with pressures adjustable in the 0.02 - 0.5 Torr range, where partial or complete ablation occurs over a short distance. An array of biased electrodes is used to collect the ionized products with spatial resolution along the ablating particles' path. An optical observation setup using a 64 channel PMT system allows direct observation of the particle and estimating the light output. A new addition to the facility, using pickup tube detectors and precise timing, allows measurement of the drag coefficient of the particle's slowdown, which we find to be significantly higher than commonly used in existing models. Measurements also indicated that the ionization efficiency of iron and aluminum at low velocities is larger than previously expected.

  4. Application of SSNTDs for measurements of fusion reaction products in high-temperature plasma experiments

    Energy Technology Data Exchange (ETDEWEB)

    Malinowska, A., E-mail: a.malinowska@ipj.gov.p [Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk (Poland); Szydlowski, A.; Malinowski, K. [Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk (Poland); Sadowski, M.J. [Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk (Poland); Institute of Plasma Physics and Laser Microfusion (IPPLM), 00-908 Warsaw (Poland); Zebrowski, J. [Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk (Poland); Scholz, M.; Paduch, M.; Zielinska, E. [Institute of Plasma Physics and Laser Microfusion (IPPLM), 00-908 Warsaw (Poland); Jaskola, M.; Korman, A. [Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk (Poland)

    2009-10-15

    The paper describes the application of SSNTDs of the PM-355 type to diagnostics of reaction products emitted from high-temperature deuterium plasmas produced in Plasma Focus (PF) facilities. Acceleration processes occurring in plasma lead often to the generation of high-energy ion beams. Such beams induce nuclear reactions and contribute to the emission of fast neutrons, fusion protons and alpha particles from PF discharges with a deuterium gas. Ion measurements are of primary importance for understanding the mechanisms of the physical processes which drive the charged-particle acceleration. The main aim of the present studies was to perform measurements of spatial- and energy-distributions of fusion-reaction protons (about 3 MeV) within a PF facility. Results obtained from energy measurements were compared with the proton-energy spectra computed theoretically. The protons were measured by means of a set of ion pinhole cameras equipped with PM-355 detectors, which were placed at different angles relative to the electrode axis of the PF facility.

  5. Regulating Medicines in Croatia: Five-year Experience of Agency for Medicinal Products and Medical Devices

    Science.gov (United States)

    Tomić, Siniša; Filipović Sučić, Anita; Plazonić, Ana; Truban Žulj, Rajka; Macolić Šarinić, Viola; Čudina, Branka; Ilić Martinac, Adrijana

    2010-01-01

    Aim To present the activities of the Agency for Medicinal Products and Medical Devices in the first 5 years of its existence and to define its future challenges. Methods Main activities within the scope of the Agency as a regulatory authority were retrospectively analyzed for the period from 2004-2008. Data were collected from the Agency’s database and analyzed by descriptive statistics. Results The number of issued medicine authorizations rose from 240 in 2004 to 580 in 2008. The greatest number of new chemical and biological entities was approved in 2005. The greatest number of regular quality controls (n = 5833) and special quality controls was performed in 2008 (n = 589), while the greatest number of off-shelf quality controls (n = 132) was performed in 2007. The greatest number of medicine labeling irregularities was found in 2007 (n = 19) and of quality irregularities in 2004 (n = 9). The greatest number of adverse reactions was reported in 2008 (n = 1393). The number of registered medical devices rose from 213 in 2004 to 565 in 2008. Conclusion Over its 5 years of existence, the Agency has successfully coped with the constant increase in workload. In the future, as Croatia enters the European Union, the Agency will have to face the challenge of joining the integrated European regulatory framework. PMID:20401952

  6. Medical isotope production experience at the V.G. Khlopin Radium Institute cyclotron

    International Nuclear Information System (INIS)

    Solin, L.M.

    2000-01-01

    Radium Institute cyclotron MGC-20 is used since 1990. There are four cyclotrons of such type in Russia and four abroad: in Finland, in Hungary, in North Korea and in Egypt. The Radium institute cyclotron was used in different fields, such as radioisotope production, nuclear physics, physics and engineering. For ten years some improvements of the Radium Institute cyclotron operation have been made. Those are: creation of the automatic control system based on IBM PC, development of a new power supply for the ion source, creation of the deflector electronic protection from discharges, change of the main elements of the cyclotron with high induced radioactivity. Moreover we investigated the possibility of the negative ions acceleration at the MGC-20 cyclotron without ion source exchange. The maximum value of the proton beam current reached was about 30 μA for 10 MeV H - beam energy. To extract the proton beam from the cyclotron after the stripping foil we made an additional output beam line. It was used for determination of the horizontal and vertical emittance. A special device was constructed and used for measurements of emittance. The latter amounted 30 π mm mrad for horizontal direction and 16 π mm mrad for vertical direction

  7. Cross Section Measurements In The Main Injector Particle Production (FNAL-E907) Experiment At 58 GEV Energy

    International Nuclear Information System (INIS)

    Gunaydin, Yusuf Oguzhan

    2009-01-01

    Cross-sections are presented for 58 GeV π, K, and p on a wide range of nuclear targets. These cross-sections are essential for determining the neutrino flux in measurements of neutrino cross-sections and oscillations. The E907 Main Injector Particle Production (MIPP) experiment at Fermilab is a fixed target experiment for measuring hadronic particle production using primary 120 GeV/c protons and secondary π, K, and p beams. The particle identification is made by dE/dx in a time projection chamber, and by time-of-flight, differential Cherenkov and ring imaging Cherenkov detectors, which together cover a wide range of momentum from 0.1 GeV/c up to 120 GeV/c. MIPP targets span the periodic table, from hydrogen to uranium, including beryllium and carbon. The MIPP has collected ∼ 0.26 x 10 6 events of 58 GeV/c secondary particles produced by protons from the main injector striking a carbon target.

  8. Production of Prebiotic Molecule Precursors from Hypervelocity Impact Simulation Experiments on Carbonate Sediments

    Science.gov (United States)

    Farcy, B. J.; Grubisic, A.; Li, X.; Pinnick, V. T.; Sutton, M.; Pavlov, A.; Brinckerhoff, W. B.

    2017-12-01

    Organic molecules, including amino acids and other biotic precursors, have been shown to form in the cooling and expanding plasma plume generated from hypervelocity impacts through the processes of atomization, ionization, and molecular recombination of impactor and impact surface. Various sources of carbon, such as atmospheric methane and carbonaceous material from meteorites, are known to yield cyano-bearing molecules and simple amino acids from impact plasmas. However, the role of mineralogical carbon has not yet been investigated in this process. We have performed experiments using laser ablation mass spectrometry (LA-MS) to study the negative ion yield of plasma-produced prebiotic molecules. A mixture of 10% NH4Cl and 90% CaCO3 was pressed into a pellet and ablated with a 1064 nm Nd:YAG laser, and the resultant negative ions were measured by a plasma analyzer quadrupole MS. Mass spectra show characteristic peaks at m/z = 26 and m/z = 42, indicating the presence of CN- and CNO- ions. When isotopically labeled 15NH4Cl and Ca13CO3 were used in the sample ablation pellet, the purported CN- and CNO- peaks shifted according to their added isotopic mass. Indeed, comparison of resulting ion formation from momentum-based techniques, such as massive cluster secondary ion mass spectrometry, show comparable fragmentation and recombination of CN- and CNO- ions. These findings show that CN- ions, as well as CN radicals and thus HCN, can be formed during meteoritic bombardment of carbonate minerals. During the late heavy bombardment of the earth from 4.1-3.8 Ga, impact-driven chemistry could have played a dominant role in shaping the earth's early prebiotic inventory and sources of chemical energy. As carbonate sediments are common in the Archean, carbonate deposits are most likely an important contributor of carbon for this process, along with atmospheric and meteoritic carbon sources.

  9. A search for R-parity violating squark production with the H1 experiment at HERA

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Michael Clemens

    2011-12-15

    A search for R-parity violating supersymmetry is performed in the complete HERA data set taken at a centre-of-mass energy of {radical}(s)=319 GeV with the H1 detector. The integrated luminosity of the data sets corresponds to 255 pb{sup -1} of positron-proton, and 183 pb{sup -1} of electron-proton collision data. By introducing a lepton-quark-squark coupling {lambda}{sup '} the resonant production of single squarks is expected. Several exclusive selection channels, based on the topologies of final states expected from direct squark decays, and squark decays via gauginos are defined. The selection channels are based on an electron or a neutrino in the final state, and may contain further jets and leptons. All of the selection channels show a good agreement with the background expectation from standard model processes. The results are interpreted in terms of exclusion limits, obtained for the minimal supersymmetric standard model, and for the minimal supergravity model, constraining the strength of the R-parity violating couplings {lambda}{sub 1j1}{sup '} and {lambda}{sub 11k}{sup '}, and the supersymmetric model parameters, under the single coupling dominance hypothesis. For an R{sub p} coupling strength comparable to the electromagnetic coupling strength, {lambda}{sub 1j1}{sup '} or {lambda}{sub 11k}{sup '}={radical}(4{pi}{alpha}{sub em})=0.3, squark masses up to 275 GeV are excluded for u{sup j}{sub L} squarks, with d{sup k}{sub R} squarks further excluded up to 290 GeV, for all three squark generations j,k=1,2,3 at the 95% confidence level. (orig.)

  10. A search for R-parity violating squark production with the H1 experiment at HERA

    International Nuclear Information System (INIS)

    Herbst, Michael Clemens

    2011-12-01

    A search for R-parity violating supersymmetry is performed in the complete HERA data set taken at a centre-of-mass energy of √(s)=319 GeV with the H1 detector. The integrated luminosity of the data sets corresponds to 255 pb -1 of positron-proton, and 183 pb -1 of electron-proton collision data. By introducing a lepton-quark-squark coupling λ ' the resonant production of single squarks is expected. Several exclusive selection channels, based on the topologies of final states expected from direct squark decays, and squark decays via gauginos are defined. The selection channels are based on an electron or a neutrino in the final state, and may contain further jets and leptons. All of the selection channels show a good agreement with the background expectation from standard model processes. The results are interpreted in terms of exclusion limits, obtained for the minimal supersymmetric standard model, and for the minimal supergravity model, constraining the strength of the R-parity violating couplings λ 1j1 ' and λ 11k ' , and the supersymmetric model parameters, under the single coupling dominance hypothesis. For an R p coupling strength comparable to the electromagnetic coupling strength, λ 1j1 ' or λ 11k ' =√(4πα em )=0.3, squark masses up to 275 GeV are excluded for u j L squarks, with d k R squarks further excluded up to 290 GeV, for all three squark generations j,k=1,2,3 at the 95% confidence level. (orig.)

  11. Search for the Production of Gluinos and Squarks with the CDF II Experiment at the Tevatron Collider

    Energy Technology Data Exchange (ETDEWEB)

    De Lorenzo, Gianluca [Autonomous Univ. of Barcelona (Spain)

    2010-05-19

    sbottom decays exclusively as $\\tilde{b}$1 → b$\\tilde{x}$10. The expected signal for direct sbottom pair production is characterized by the presence of two jets of hadrons from the hadronization of the bottom quarks and E=T from the two LSPs in the final state. The events are selected with large ET and two energetic jets in the final state, and at least one jet is required to be associated with a b quark. The measurements are in good agreement with SM predictions for backgrounds. The results are translated into 95% CL exclusion limits on production cross sections and sbottom and neutralino masses in the given MSSM scenario. Cross sections down to 0.1 pb are excluded for the sbottom mass range considered. Sbottom masses up to 230 GeV/c2 are excluded at 95% CL for neutralino masses below 70 GeV/c2. This analysis increases the previous CDF limit by more than 40 GeV/c2. The sensitivity of both the inclusive and the exclusive search is dominated by systematic effects and the results of the two analyses can be considered as conclusive for CDF Run II. With the new energy frontier of the newly commissioned Large Hadron Collider in Geneva, the experience from Tevatron will be of crucial importance in the developing of effective strategies to search for SUSY in the next era of particle physics experiments.

  12. Effects of biosurfactant production by indigenous soil microorganisms on bioremediation of a co-contaminated soil in batch experiments

    Energy Technology Data Exchange (ETDEWEB)

    Jalali, F.; Mulligan, C.N. [Concordia Univ., Centre for Building Studies, Montreal, PQ (Canada). Dept. of Building, Civil and Environmental Engineering

    2007-07-01

    The challenge of remediating soils that are contaminated with both hydrocarbon compounds and metals was discussed, with particular reference to an in-situ bioremediation technique that was developed in the 1970s to deal with contaminated soils. The technique involves a two-stage process where water with added oxygen and nutrients is applied onto and injected into a contaminated area to stimulate the indigenous microbial populations in the soil. In addition to using organic pollutants as their carbon source, microorganisms can facilitate the removal of metals from the soil matrix and attenuate the toxicity of certain metals. Extraction wells placed downstream of the contaminated soils are used to remove and treat the water to eliminate any mobilized contaminants. This paper presented the results of batch experiments that evaluated the feasibility of biosurfactant production for the purpose of bioremediating a soil contaminated with aged petroleum hydrocarbons and heavy metals. The first phase of the study examined the growth of the native microbial population and the biodegradation of petroleum hydrocarbons, the production of biosurfactant and the mobilization of the total petroleum hydrocarbons (TPH) and metals into the aqueous phase. Biodegradation of petroleum hydrocarbons was observed in both soil and soil amended with nitrogen and phosphorous. However, the nutrient-amended soil had higher biodegradation of petroleum hydrocarbons, where 36 per cent of TPH was degraded by the end of the 50 day experiment, compared to 15 per cent for the non-amended soils. The concentration of biosurfactants in the same period increased 3 times their critical micelle concentration. It was concluded that biosurfactant production enhances the bioremediation of co-contaminated soils. 36 refs., 1 tab., 8 figs.

  13. From problem people to addictive products: a qualitative study on rethinking gambling policy from the perspective of lived experience.

    Science.gov (United States)

    Miller, Helen E; Thomas, Samantha L; Robinson, Priscilla

    2018-04-06

    Previous research has shown that government and industry discussions of gambling may focus on personal responsibility for gambling harm. In Australia, these discussions have largely excluded people with lived experience of problem gambling, including those involved in peer support and advocacy. We conducted 26 in-depth interviews with people with current or previous problem gambling on electronic gaming machines (EGMs) involved in peer support and advocacy activities, using an approach informed by Interpretive Policy Analysis and Constructivist Grounded Theory. Participants perceived that government and industry discussed gambling as safe and entertaining with a focus on personal responsibility for problem gambling. This focus on personal responsibility was perceived to increase stigma associated with problem gambling. In contrast, they described gambling as risky, addictive and harmful, with problem gambling resulting from the design of EGMs. As a result of their different perspectives, participants proposed different interventions to reduce gambling harm, including reducing accessibility and making products safer. Challenging the discourses used by governments and industry to describe gambling, using the lived experience of people with experience of gambling harm, may result in reduced stigma associated with problem gambling, and more effective public policy approaches to reducing harm.

  14. Operating experience in processing of differently sourced deeply depleted uranium oxide and production of deeply depleted uranium metal ingots

    International Nuclear Information System (INIS)

    Manna, S.; Ladola, Y.S.; Sharma, S.; Chowdhury, S.; Satpati, S.K.; Roy, S.B.

    2009-01-01

    Uranium Metal Plant (UMP) of BARC had first time experience on production of three Depleted Uranium Metal (DUM) ingots of 76kg, 152kg and 163kg during March 1991. These ingots were produced by processing depleted uranyl nitrate solution produced at Plutonium Plant (PP), Trombay. In recent past Uranium Metal Plant (UMP), Uranium Extraction Division (UED), has been assigned to produce tonnage quantity of Deeply DUM (DDUM) from its oxide obtained from PP, PREFRE and RMP, BARC. This is required for shielding the high radioactive source of BHABHATRON Tele-cobalt machine, which is used for cancer therapy. The experience obtained in processing of various DDU oxides is being utilized for design of large scale DDU-metal plant under XIth plan project. The physico- chemical characteristics like morphology, density, flowability, reactivity, particle size distribution, which are having direct effect on reactivity of the powders of the DDU oxide powder, were studied and the shop-floor operational experience in processing of different oxide powder were obtained and recorded. During campaign trials utmost care was taken to standardized all operating conditions using the same equipment which are in use for natural uranium materials processing including safety aspects both with respect to radiological safety and industrial safety. Necessary attention and close monitoring were specially arranged and maintained for the safety aspects during the trial period. In-house developed pneumatic transport system was used for powder transfer and suitable dust arresting system was used for reduction of powder carry over

  15. Release of fission products by a rod with a manufacturing defect (BREAK). The BOUFFON 08 J 4 experiment

    International Nuclear Information System (INIS)

    Chenebault, P.; Kurka, G.

    The BOUFFON 08 experiment consisted of the circuit irradiation in the Siloe reactor of the thermosiphon and the 15 x 15 type rod with a seal defect simulating a faulty solder (weld). The conditions of power, temperature, and pressure were typical of PWR conditions. The fission products released by the faulty rod and the presence of a water cooling circuit have been analyzed using samples. The γ-activity was essentially due to the volatile fission products; it progressively increased over the course of 25 days of irradiation by the rod and reaches 30 to 35 curies per kW of nuclear waste. Over the course of the test, the activities radiated by the tube circuits were one to two orders higher than those that uniquely correspond to the nuclides that were present in the water: the iodine and noble gases were deposited on the walls and this deposit was continuously resupplied by the circulating water. At the end of irradiation, secondary ruptures were apparent at the level of the fuel; these were revealed by a gross increase in the concentrations of solid fission products and by the abnormal distribution of radioactive nuclides in the fuel

  16. Measurement of K(892)*0 resonance production in Pb-Pb collisions with the ALICE experiment at the LHC

    CERN Document Server

    Bellini, Francesca

    The analysis of the K(892)*0 resonance production in Pb–Pb collisions at √sNN = 2.76 TeV with the ALICE detector at the LHC is presented. The analysis is motivated by the interest in the measurement of short-lived resonances production that can provide insights on the properties of the medium produced in heavy-ion collisions both during its partonic (Quark-Gluon Plasma) and hadronic phase. This particular analysis exploits particle identification of the ALICE Time-Of-Flight detector. The ALICE experiment is presented, with focus on the performance of the Time-Of-Flight system. The aspects of calibration and data quality controls are discussed in detail, while illustrating the excellent and very stable performance of the system in different collision environments at the LHC. A full analysis of the K*0 resonance production is presented: from the resonance reconstruction to the determination of the efficiency and the systematic uncertainty. The results show that the analysis strategy discussed is a valid too...

  17. High productivity chromatography refolding process for Hepatitis B Virus X (HBx) protein guided by statistical design of experiment studies.

    Science.gov (United States)

    Basu, Anindya; Leong, Susanna Su Jan

    2012-02-03

    The Hepatitis B Virus X (HBx) protein is a potential therapeutic target for the treatment of hepatocellular carcinoma. However, consistent expression of the protein as insoluble inclusion bodies in bacteria host systems has largely hindered HBx manufacturing via economical biosynthesis routes, thereby impeding the development of anti-HBx therapeutic strategies. To eliminate this roadblock, this work reports the development of the first 'chromatography refolding'-based bioprocess for HBx using immobilised metal affinity chromatography (IMAC). This process enabled production of HBx at quantities and purity that facilitate their direct use in structural and molecular characterization studies. In line with the principles of quality by design (QbD), we used a statistical design of experiments (DoE) methodology to design the optimum process which delivered bioactive HBx at a productivity of 0.21 mg/ml/h at a refolding yield of 54% (at 10 mg/ml refolding concentration), which was 4.4-fold higher than that achieved in dilution refolding. The systematic DoE methodology adopted for this study enabled us to obtain important insights into the effect of different bioprocess parameters like the effect of buffer exchange gradients on HBx productivity and quality. Such a bioprocess design approach can play a pivotal role in developing intensified processes for other novel proteins, and hence helping to resolve validation and speed-to-market challenges faced by the biopharmaceutical industry today. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. Potency assay development for cellular therapy products: an ISCT review of the requirements and experiences in the industry.

    Science.gov (United States)

    Bravery, Christopher A; Carmen, Jessica; Fong, Timothy; Oprea, Wanda; Hoogendoorn, Karin H; Woda, Juliana; Burger, Scott R; Rowley, Jon A; Bonyhadi, Mark L; Van't Hof, Wouter

    2013-01-01

    The evaluation of potency plays a key role in defining the quality of cellular therapy products (CTPs). Potency can be defined as a quantitative measure of relevant biologic function based on the attributes that are linked to relevant biologic properties. To achieve an adequate assessment of CTP potency, appropriate in vitro or in vivo laboratory assays and properly controlled clinical data need to be created. The primary objective of a potency assay is to provide a mechanism by which the manufacturing process and the final product for batch release are scrutinized for quality, consistency and stability. A potency assay also provides the basis for comparability assessment after process changes, such as scale-up, site transfer and new starting materials (e.g., a new donor). Potency assays should be in place for early clinical development, and validated assays are required for pivotal clinical trials. Potency is based on the individual characteristics of each individual CTP, and the adequacy of potency assays will be evaluated on a case-by-case basis by regulatory agencies. We provide an overview of the expectations and challenges in development of potency assays specific for CTPs; several real-life experiences from the cellular therapy industry are presented as illustrations. The key observation and message is that aggressive early investment in a solid potency evaluation strategy can greatly enhance eventual CTP deployment because it can mitigate the risk of costly product failure in late-stage development. Copyright © 2013. Published by Elsevier Inc.

  19. Mentoring, Training, and Scholarly Productivity Experiences of Cancer-Related Health Disparities Research Trainees: Do Outcomes Differ for Underrepresented Scientists?

    Science.gov (United States)

    Felder, Tisha M; Braun, Kathryn L; Wigfall, Lisa; Sevoyan, Maria; Vyas, Shraddha; Khan, Samira; Brandt, Heather M; Rogers, Charles; Tanjasiri, Sora; Armstead, Cheryl A; Hébert, James R

    2018-02-12

    The study aims to explore variation in scholarly productivity outcomes by underrepresented status among a diverse sample of researchers in a community-engaged training program. We identified 141 trainees from a web-based survey of researchers in the National Cancer Institute-funded, Community Networks Program Centers (CNPCs) (2011-2016). We conducted a series of multiple logistic regression models to estimate the effect of National Institutes of Health (NIH)-defined underrepresented status on four, self-reported, scholarly productivity outcomes in the previous 5 years: number of publications (first-authored and total) and funded grants (NIH and any agency). Sixty-five percent (n = 92) indicated NIH underrepresented status. In final adjusted models, non-NIH underrepresented (vs. underrepresented) trainees reported an increased odds of having more than the median number of total publications (> 9) (OR = 3.14, 95% CI 1.21-8.65) and any grant funding (OR = 5.10, 95% CI 1.77-14.65). Reporting ≥ 1 mentors (vs. none) was also positively associated (p < 0.05) with these outcomes. The CNPC underrepresented trainees had similar success in first-authored publications and NIH funding as non-underrepresented trainees, but not total publications and grants. Examining trainees' mentoring experiences over time in relation to scholarly productivity outcomes is needed.

  20. Direct measurement of tritium production rate in LiPb with removed parasitic activities: Preliminary experiments

    Energy Technology Data Exchange (ETDEWEB)

    Kuc, Tadeusz, E-mail: kuc@agh.edu.pl; Pohorecki, Władysław; Ostachowicz, Beata

    2014-10-15

    Liquid scintillation (LS) technique applied to direct measurement of tritium activity produced in LiPb eutectic in Frascati HCLL TBM mock-up neutronic experiment has been tested so far in the case of LS measurement after long period since irradiation. LiPb samples irradiated in neutron filed show, except of tritium, meaningful activity of other radioisotopes (parasitic). Parasitic activity, mainly from isotopes of lead ({sup 209}Pb, {sup 204m}Pb, {sup 203}Pb) calculated with the use of FISPACT, exceeds ca 5 times tritium activity 1.4 h after irradiation. We propose to remove disturbing radioisotopes in a chemical way to avoid long “cooling” of the irradiated samples before tritium measurement. Samples (1 g of LiPb) irradiated in reactor fast neutron flux were diluted and metallic cations removed by chemical precipitation. For this purpose we used: potassium iodide (KJ), strontium chloride (SrCl{sub 2}), APDC (C{sub 5}H{sub 8}NS{sub 2}·NH{sub 4}), NaDDTC (C{sub 5}H{sub 10}NNaS{sub 2}·3H{sub 2}O), and PAN (C{sub 15}H{sub 11}N{sub 3}O). Precipitation procedure in each case lasted ca 5–25 min, and the following filtration next 10–20 min. In each filtrate (ca 120 ml) we measured Pb concentration in total reflection X-ray fluorescence (TXRF) analyzer and parasitic activity (left after 21-day “cooling”) applying HPGe gamma spectrometer. Pb cations precipitated by SrCl{sub 2} and than by PAN lowered activity of Pb isotopes to less than 1% of the initial tritium activity. Another combination of reagents: NaDDTC followed by SrCl{sub 2} in a single and double step filtration reduced Pb concentration 10{sup 2} and 10{sup 4} times, respectively. Reduction of this order allows tritium radiometric measurement ca 3 h after irradiation with acceptable accuracy. This time can be shortened by applying correction for decay of known parasitic activity. Input of {sup 76}As and other less abundant radioisotopes can be eliminated using high purity LiPb. Tritium activity of

  1. Veterinary herd health management-Experience among farmers and farm managers in Swedish dairy production.

    Science.gov (United States)

    Svensson, C; Alvåsen, K; Eldh, A C; Frössling, J; Lomander, H

    2018-07-01

    A preventive herd health approach will most likely reduce incidences of clinical and subclinical disease. Swedish veterinary organizations offer specific veterinary herd health management (HHM) programs, but these services are not used to a large extent. The aim of this study was to investigate dairy farmers' experience of HHM and the conditions for collaboration with veterinarians in HHM. Six focus group discussions were conducted in March 2015 in West Sweden. In total, 33 dairy farmers participated. The recordings were transcribed and coded using thematic analysis, and the transcripts were reviewed to identify potential factors indicating barriers for farmers to engage a veterinarian in HHM. The participants reported HHM to be important, but they had difficulty defining the actions included in the concept. They described a wide range of their work duties as preventive. The farmers' list of potential contributions by the veterinarians in HHM was strikingly short compared to the considerable number of preventive measures they performed themselves. Four main obstacles for farmers and farm managers to engage a veterinarian in HHM on their farm were identified in the analysis: "costs", "veterinary knowledge, skills, and organization", "farmer attitudes", and "veterinarian-farmer relationships". Costs were proposed as the main reason against engaging a veterinarian in HHM and included a high veterinary bill, low cost-benefit of veterinary services, and high costs to implement advice. Poor veterinary competence in HHM and poor knowledge about effective measures, practical farming, and farm economics were other important obstacles. Veterinarians were perceived to insufficiently describe their services and their benefits, and several participants felt they had never been offered veterinary HHM. Although veterinary HHM may be initiated by the farmer, the participants expected the veterinarian to have special responsibility for the initiation. A firm trust between farmer

  2. Top quark pair production and calorimeter energy resolution studies at a future collider experiment

    Energy Technology Data Exchange (ETDEWEB)

    Seidel, Katja

    2012-03-27

    This thesis is focused on detector concepts and analyses investigated at a future linear electron positron collider. For precision measurements at such a collider, the CALICE collaboration develops imaging calorimeters, which are characterized by a fine granularity. CALICE has constructed prototypes of several design options for electromagnetic and hadronic calorimeters and has successfully operated these detectors during combined test beam programs at DESY, CERN and Fermilab. To improve the hadronic energy reconstruction and energy resolution of a hadron calorimeter prototype with analog readout three software compensation techniques are presented in this thesis, of which one is a local and two are global software compensation approaches. One method is based on a neural network to optimize the energy reconstruction, while two are energy weighting techniques, depending on the energy density. Weight factors are extracted from and applied to simulated and test beam data and result in an average energy resolution improvement of 15 - 25% compared to a reconstruction without software compensation. Whether such software compensation techniques are also applicable to a detector concept for a future linear electron positron collider is studied in the second part of this thesis. Simulated data, two different hadronic detector models and a local software compensation technique are used for this study. The energy resolutions for single hadrons and for jets are presented with and without software compensation. In the third part of this thesis, a study on top quark pair production at a center-of-mass energy of 500 GeV at the proposed electron positron collider CLIC is presented. The analysis is based on full detector simulations, including realistic background contributions dominated by two photon processes. The mass and width of the top quark are studied in fully-hadronic and semi-leptonic decays of top quark pairs using event samples of signal and Standard Model background

  3. Chilean experience in production of 18F-FDG from 18F in a reactor

    International Nuclear Information System (INIS)

    Chandia, M.; Godoy, N.; Errazu, X.; Hernandez; Figols, M.; Firnau, G.; Tronsoco, F.

    2000-01-01

    18 F-FDG (fluorine-deoxy-D-glucose) is an important and useful radiopharmaceutical for imaging and study of myocardial viability. Usually cyclotron-produced 18 F is used to label 18 F-FDG. The availability of a 5 MW Nuclear Reactor in Chile and the absence of a quality cyclotron to produce 18 F required that we developed a method in order to obtain suitable 18 F to label 18 F-FDG using the facilities we have at the Nuclear Center of La Reina, Chilean Nuclear Energy Commission. The nuclear reactions involved are: 6 Li(n,aα) 3 H and 16 O( 3 H,n) 18 F. Enriched Li 2 CO 3 ( 6 Li = 95 %) was irradiated in a 5 MW swimming pool type nuclear reactor with a neutron flux of 5. 7 x 10 13 n cm -2 s -1 for 4 hours. The irradiated Li 2 CO 3 was dissolved in H 2 SO 4 (1:1) and distilled as trimethylsilyl( 18 F)fluoride ( 18 F-TMS). The labelling of the sugar was carried out using the method described by Hamacker. The 18 F-TMS was trapped in a solution of acetonitrile, water, potassium carbonate, and kriptofix and hydrolysed to form 18 F fluoride. The nucleophilic complex reacts with 1,3,4,6, tetra-O-acetyl- 2-O-trifluoromethanesulfonyl-bβ-D-mannopyranose. The acetylated carbohydrate by acid hydrolysis produces 18 F-FDG. The final product was purified using an ion retarding resin (AG11-A8) and a system two Sep Pak Plus: Alumina and C-18 cartridge and sterilised by Millipore 0.22 μm filter. The 18 F-FDG was obtained in an apyrogenic and sterile solution. The 18 F radionuclide purity was higher than 99.9% and the radiochemical purity ofthe 18 F-FDG obtained was over than 99%. Residual 3 H content was as low as 20 (Bq 3 H/MBq 18 F-FDG.). The yield of the process 18 F-FDG was 13.2 %. (authors)

  4. Top quark pair production and calorimeter energy resolution studies at a future collider experiment

    International Nuclear Information System (INIS)

    Seidel, Katja

    2012-01-01

    This thesis is focused on detector concepts and analyses investigated at a future linear electron positron collider. For precision measurements at such a collider, the CALICE collaboration develops imaging calorimeters, which are characterized by a fine granularity. CALICE has constructed prototypes of several design options for electromagnetic and hadronic calorimeters and has successfully operated these detectors during combined test beam programs at DESY, CERN and Fermilab. To improve the hadronic energy reconstruction and energy resolution of a hadron calorimeter prototype with analog readout three software compensation techniques are presented in this thesis, of which one is a local and two are global software compensation approaches. One method is based on a neural network to optimize the energy reconstruction, while two are energy weighting techniques, depending on the energy density. Weight factors are extracted from and applied to simulated and test beam data and result in an average energy resolution improvement of 15 - 25% compared to a reconstruction without software compensation. Whether such software compensation techniques are also applicable to a detector concept for a future linear electron positron collider is studied in the second part of this thesis. Simulated data, two different hadronic detector models and a local software compensation technique are used for this study. The energy resolutions for single hadrons and for jets are presented with and without software compensation. In the third part of this thesis, a study on top quark pair production at a center-of-mass energy of 500 GeV at the proposed electron positron collider CLIC is presented. The analysis is based on full detector simulations, including realistic background contributions dominated by two photon processes. The mass and width of the top quark are studied in fully-hadronic and semi-leptonic decays of top quark pairs using event samples of signal and Standard Model background

  5. Hipernexus Hipernexus: a as didactic experience methodology for the production of hypertexts

    Directory of Open Access Journals (Sweden)

    García Giraldo Ruth Marina

    2008-01-01

    Full Text Available Este texto pretende presentar el sistema Hipernexus como una alternativa didáctica para la producción de documentos hipertextuales, dada la fuerte presencia de las TIC en el aula de clase; lo que implica, en principio, plantear el concepto de hipertexto para el sistema y cómo dicha concepción, sumada a los soportes de lectura y escritura que han existido a lo largo de toda la historia (particularmente Hipernexus, cambian, de manera significativa, el modo de comprender no sólo la lectura y la escritura, sino que también replantea el papel del lector, diluye la figura del autor, dispersa las fronteras de los textos que, hasta ahora, se venían comportando como entidades intelectuales autónomas, singulares e independientes. Esto da paso al otro texto como una economía de referentes siempre abiertos, heterogéneos con fracturas, esguinces, saltos y que, por tanto, no puede considerarse como inmediato, en el sentido que está inacabado, como unidad cierta u homogénea; por el contrario, siempre existe una posibilidad de prolongación, extensión, antifaz o pliegue del mismo. The aim of this text is to introduce Hipernexus as a didactic option in order of creating hypertextual documents, given the strong presence of TIC on classrooms nowadays; first of all, this involves posing the conception of hypertext, understood for the system and as such understanding, summed up to the basis of reading and writing we’ve witnessed throughout history, meaningfully changing the way we understand not only reading and writing, but also redefining reader’s role, diluting author’s figure, scattering texts’ borders that, until now, had behaved as intellectual, autonomic, odd and independent entities. This allows new texts to become an economy of open referents, heterogeneous and fill with fractures, sprains and jumps, hence they can’t be consider immediately on the sense of finished products as an unit.

  6. Experience with copper oxide production in antiproton source components at Fermi National Accelerator Laboratory

    International Nuclear Information System (INIS)

    Ader, Christine R.; Harms, Elvin R. Jr; Morgan, James P.

    2000-01-01

    The Antiproton (Pbar) Source at Fermi National Accelerator Laboratory is a facility comprised of a target station, two rings called the Debuncher and Accumulator and the transport lines between those rings and the remainder of the particle accelerator complex. Water is by far the most common medium for carrying excess heat away from components, primarily electromagnets, in this facility. The largest of the water systems found in Pbar is the 95 degree Fahrenheit Low Conductivity Water (LCW) system. LCW is water which has had free ions removed, increasing its resistance to electrical current. This water circuit is used to cool magnets, power supplies, and stochastic cooling components and typically has a resistivity of 11--18 megaohms-cm. For more than ten years the Antiproton rings were plagued with overheating magnets due to plugged water-cooling channels. Various repairs have been tried over the years with no permanent success. Throughout all of this time, water samples have indicated copper oxide, CuO, as the source of the contamination. Matters came to a head in early 1997 following a major underground LCW leak between the Central Utilities Building and the Antiproton Rings enclosures. Over a span of several weeks following system turn-on, some twenty magnets overheated leading to unreliable Pbar source operation. Although it was known that oxygen in the system reacts with the copper tubing to form CuO, work to remedy this problem was not undertaken until this time period. Leaks, large quantities of make-up water, infrequent filter replacement, and thermal cycling also result in an increase in the corrosion product release rate. A three-pronged approach has been implemented to minimize the amount of copper oxide available to plug the magnets: (1) installation of an oxygen removal system capable of achieving dissolved oxygen concentrations in the parts per billion (ppb) range; (2) regular closed-loop filter/flushing of the copper headers and magnets and stainless

  7. A beam detector for pion experiments and analysis of the inclusive Λ production in proton-proton reactions with HADES

    Energy Technology Data Exchange (ETDEWEB)

    Lalik, Rafal Tomasz

    2016-06-02

    This thesis presents the work focused on two topics related to the physics performed at the HADES detector. In the first part, the development of the tracking detector playing an important role of online beam monitoring and the momentum reconstruction device in the secondary pion beam experiment is presented. Such a detector must fulfill various requirements regarding the operation in the vacuum, with accelerator beams and high count rates. Two detection stations employing double sided silicons strip sensors with an active area of 10 cm x 10 cm and position resolution of 780 μm, providing momentum resolution below 0.5 % and capable for operating with beams up to 32 x 10{sup 6} particles/s total and 2 x 10{sup 6} particles/s in a single channel have been constructed, tested and used in the pion beam experiments. In the first chapter, general information about the production of the secondary, in particular, pion beams is presented. Further, description how the momentum is reconstructed using the information obtained from the tracking detector, and description of most important components of the system, namely the silicon sensor and front end electronics used for its readout is presented. In the second chapter, development of the detector, including all the components used or constructed for this particular purpose is presented. This section also includes description of the laboratory tests and calibrations performed to characterize the detector. In the end of the section, results from two of the beam runs employed for the tests of the detector are presented and discussed. The last third chapter presents results from the commissioning of the tracking detector in the final configuration. Momentum reconstruction feasibility is presented. The second part of the thesis focuses on the analysis of inclusive production of the Λ hyperons in the nuclear reactions at the HADES energies. The aims of the analysis are to extract the differential cross-section of Λ production in

  8. AN EXPERIENCE OF HANDLING MICROBIAL CONTAMINATION OF PRODUCT WATER AT A HAEMODIALYSIS UNIT IN NORTH KARNATAKA OF INDIA

    Directory of Open Access Journals (Sweden)

    Archana Aravindrao Dambal

    2017-09-01

    Full Text Available BACKGROUND Dialysis units need regular prophylactic disinfection of the dialysis water production and distribution circuit without which there can be chronic inflammation among patients using the facility. The aim of the study is to present here our experience in containing an episode of microbial contamination of dialysis water. MATERIALS AND METHODS Our haemodialysis unit had a single pass reverse osmosis plant with facility for pretreatment of raw water and a distribution loop of medical grade PVC (polyvinyl chloride feeding haemodialysis machines, bicarbonate preparation and dialyser reprocessing areas. After installation, the Reverse Osmosis (RO membranes and distribution loop were disinfected every fortnight using formalin. Cultures of product water were sent from various sites in the product water loop every month. RESULTS From January to April 2011, 15 water samples out of 52 water samples grew Pseudomonas aeruginosa with a colony count over 200 Colony-Forming Units (CFU. The average monthly number of haemodialysis was reduced from 84.75 to 65. Two patients had intradialytic pyrexia and two others had mild lower respiratory infection. So, the reverse osmosis plant and product water distribution system were repeatedly disinfected using 2% formalin and 1% bleach ensuring contact time and thorough rinsing to address persistent cultures. When these measures could not eradicate microbial growth, the system was sanitised with Gramicid (48% w/w H2O2 + 500 ppm Ag and all traces of the disinfectant were rinsed away before resuming haemodialysis. CONCLUSION The microbial contamination of dialysis water was eradicated by Gramicid and not by bleach or formalin without any adverse effects after thorough rinsing.

  9. The role of product information on consumer sensory evaluation, expectations, experiences and emotions of cricket-flour-containing buns.

    Science.gov (United States)

    Pambo, Kennedy O; Okello, Julius J; Mbeche, Robert M; Kinyuru, John N; Alemu, Mohammed H

    2018-04-01

    Studies suggest that consumer' acceptance of edible insects can be enhanced by processing and blending them with familiar food products. This is however, expected to result in changes in some sensory attributes. In this study, we investigated how consumers evaluate the appropriateness of sensory attributes of a common bakery product (buns) that was blended with cricket-flour i.e., cricket-flour-containing (CFC) buns. We also tested whether provision of information can modulate the sensory evaluations, personal involvement and emotions. The study is based on a field experiment involving 432 participants drawn from rural communities in Kenya. Participants were randomly assigned to 3 information treatment groups: i) Control group - received only general information, ii) Treatment 1 - received general information and information about the benefits (i.e., positive attributes), iii) Treatment 2 - received general information and information about the potential drawbacks (i.e., negative attributes). Participants evaluated the CFC buns before and after tasting using Just-About-Right (JAR) scale. Results indicate that providing product information affected sensory evaluation of the product's sensory attributes. They also indicate that actual tasting of the CFC buns improved the convergence of sensory evaluation of the attributes towards the ideal level. Results further show that CFC buns elicited more positive feelings with little differences in the emotional profiles between the information treatments, which suggests general interest in the buns. These results provide useful insights on how to enhance consumer acceptance of insect-based foods. We discuss the implications of the findings. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. SB3. Experiment on secondary gamma-ray production cross sections averaged over a fast-neutron spectrum for each of 13 different elements plus a stainless steel

    International Nuclear Information System (INIS)

    Maerker, R.E.

    1976-01-01

    The experimental and calculational details for a CSEWG integral data testing shielding experiment are presented. This particular experiment measured the secondary gamma-ray production cross sections averaged over a fast-neutron spectrum for iron, oxygen, sodium, aluminum, copper, titanium, calcium, potassium, silicon, nickel, zinc, barium, sulfur, and a type 321 stainless steel. The gamma-ray production cross sections were binned into 0.5-MeV wide gamma-ray energy intervals. 29 tables, 1 figure

  11. How to reconcile wood production and biodiversity conservation? The Pan-European boreal forest history gradient as an "experiment".

    Science.gov (United States)

    Naumov, Vladimir; Manton, Michael; Elbakidze, Marine; Rendenieks, Zigmars; Priednieks, Janis; Uhlianets, Siarhei; Yamelynets, Taras; Zhivotov, Anton; Angelstam, Per

    2018-07-15

    , different regional forest histories provide different challenges in terms of satisfying both wood production and biodiversity conservation objectives in a forest management unit. These regional differences in northern Europe create opportunities for exchanging experiences among different regional contexts about how to achieve both objectives. We discuss this in the context of land-sharing versus land-sparing. Copyright © 2018 Elsevier Ltd. All rights reserved.

  12. Consumer Choices and Motives for Eco-Labeled Products in China: An Empirical Analysis Based on the Choice Experiment

    Directory of Open Access Journals (Sweden)

    Qing Liu

    2017-02-01

    Full Text Available Based on choice experiments conducted via face-to-face interviews with 435 participants in four provincial areas of China (Shanghai, Zhejiang, Jiangsu, and Guangdong, Chinese consumers’ preferences and motives for purchasing eco-labeled rice are examined in this study. The heterogeneous effects of each motivating channel are also investigated. The results reveal positive correlations between premiums for eco-labeled rice and consumers’ concerns about food safety and the environment, suggesting that health benefits and environmental considerations are the two critical motivations. The willingness to pay for eco-labeled rice does not increase with consumers’ knowledge of the different production standards indicated by each eco-label. Individual characteristics that determine each class are further explored through a seemingly irrelevant regression to identify the target group of consumers for policy-makers.

  13. SB2. Experiment on secondary gamma-ray production cross sections arising from thermal-neutron capture in each of 14 different elements plus a stainless steel

    International Nuclear Information System (INIS)

    Maerker, R.E.

    1976-01-01

    The experimental and calculational details for a CSEWG integral data testing shielding experiment are presented. This particular experiment measured the secondary gamma-ray production cross sections arising from thermal-neutron capture in iron, nitrogen, sodium, aluminum, copper, titanium, calcium, potassium, chlorine, silicon, ickel, zinc, barium, sulfur and a type 321 stainless steel. 1 figure, 30 tables

  14. Do women and providers value the same features of contraceptive products? Results of a best-worst stated preference experiment.

    Science.gov (United States)

    Weisberg, Edith; Bateson, Deborah; Knox, Stephanie; Haas, Marion; Viney, Rosalie; Street, Deborah; Fiebig, Denzil

    2013-06-01

    To determine how women and physicians rate individual characteristics of contraceptives. Discrete choice experiments are used in health economics to elicit preferences for healthcare products. A choice experiment uses hypothetical scenarios to determine which individual factors influence choice. Women and general practitioners (GPs) were shown individual characteristics of contraceptives, not always matching existing methods, and chose the best and worst features. Two hundred women, mean age 36, 71% using contraception, were presented with descriptions of 16 possible methods and asked to indicate their preference for individual characteristics. One hundred and sixty-two GPs, mostly women, also completed 16 descriptions. Longer duration of action was most favoured by both, followed by lighter periods with less pain or amenorrhoea. The least attractive features for women were heavier and more painful periods, high cost, irregular periods, low efficacy (10% failure) and weight gain of 3 kg. GPs ranked a 10% pregnancy rate as least attractive followed by heavy painful periods and a 5% failure rate. Women and GPs differed in their ranking of contraceptive characteristics. Long duration of use, high efficacy, minimal or no bleeding without pain, were preferred by both. Very undesirable were heavy periods especially with pain, and low efficacy.

  15. Measurement of top quark pair production cross section and charge asymmetry at the LHC with the ATLAS experiment.

    CERN Document Server

    Besana, Maria Ilaria

    In March 2010 the Large Hadron Collider (LHC) at CERN started its operation at a center of mass energy of 7 TeV. During this period, the ATLAS experiment has been collecting a large number of proton-proton collision events, resulting in an integrated luminosity of about 5.2 fb^(-1) up to now. My PhD research has been focused on top quark physics, which is one of the milestones of the ATLAS experiment physics program. The production of top quarks is indeed the dominant high p_T process in p-p collisions at multi-TeV energies, after QCD jets, W and Z bosons. Furthermore, top physics is a rich subject, in fact top quark events are used for detector commissioning and to provide a consistency test of the Standard Model (SM). Finally the top quark sector is considered a good channel for new physics discovery. In some Beyond Standard Model (BSM) theories top quark pairs can be produced by the exchange of undiscovered heavy particles. The first part of my PhD activity has been dedicated to the top quark pair producti...

  16. Mesure de la production de di-bosons WZ auprès du LHC avec l'experience ATLAS

    CERN Document Server

    Keoshkerian, Houry

    This thesis is performed in the frame of the ATLAS experiment at the LHC. A first part of the work presented in this document consists on the time calibration of the ATLAS Liquid Argon (LAr) calorimeter. The control of the time alignment of the calorimeter is important for the goodness of the quality of the energy reconstructed in the calorimeter. The results presented in this thesis have allowed an improvement of 30% of the global time resolution of the LAr calorimeter. The Standard model of particle physics predicts, during proton collisions, the production of the $W$ and $Z$ weak bosons as a pair due to the interaction of a quark with an anti-quark. The diboson production can be sensitive to the couplings between vector bosons. An anomalous deviation of these couplings from the prediction of the SM would point to the presence of new physics. The use of the full statistics of the 2012 ATLAS data allowed us to increase the precision of the measurement of these couplings compared to previous results based on...

  17. Multi-strange production of baryons at the LHC in proton-proton collisions with the ALICE experiment

    International Nuclear Information System (INIS)

    Maire, A.

    2011-01-01

    Strange quarks define a valuable probe for the understanding of quantum chromodynamics. The present PhD work falls within this scope; it deals with the study of multi-strange baryons Ξ - (dss) and Ω - (sss) in the proton-proton collisions (pp) at the LHC. The analyses make use of the ALICE experiment and are performed at central rapidities (|y| ∼ 0) and low transverse momentum (p T 2 N/dp T dy = f(p T ). At √(s) = 0.9 TeV, the production of (Ξ - +Ξ-bar + ) in the inelastic pp interactions is derived from a small statistics of events. At √(s) = 7 TeV, the large quantity of available data allows the measurement of production rates for each of the four species: Ξ - , Ξ-bar + , Ω - , and Ω-bar + . At both energies, experimental data spectra are compared to spectra as produced by different benchmark phenomenological models (PYTHIA and PHOJET). The comparison shows an unequivocal underestimate of the spectra by the Monte Carlo generators in their current versions (up to a factor ∼ 4 for Ξ, ∼ 15 for Ω). Furthermore, an analysis of azimuthal correlations (Ξ ± - h ± ) is led at intermediate p T (2 ± rises, the emission of the latter is preferentially done in correlation with jets. (author)

  18. The Nigerian experience in health, safety, and environmental matters during oil and gas exploration and production operations

    International Nuclear Information System (INIS)

    Oyekan, A.J.

    1991-01-01

    Since crude oil was first discovered in commercial quantities in the Country, in 1956, Nigerian oil and gas exploration and production activities have steadily increased as petroleum assumed strategic importance in the nation's economy. However, just as occurs in many parts of the world, crude oil and gas are found and produced in Nigeria sometimes in very hostile and unfavorable environments. The search for oil and gas takes explorers to the hot regions of the Northern parts of the country, the swamp jungle location of the Niger Delta, as well as offshore locations in the Atlantic Ocean. Each terrain, whether land, swamp or offshore, in deep or shallow waters, present unique health, safety and environmental implications and challenges to the operators, as well as, to the Government regulators. From a background of existing Nigerian Laws and operational experience, this paper details the programmes that have been put in place to guarantee a healthy workforce, ensure the safety of personnel and equipment, and protect the Nigerian environment during oil and gas exploration and production operations, as well as their documented effectiveness. The paper discusses the performance of the Petroleum Industry by analyzing the health, safety and environmental records available from 1956 - 1990. The records of major incidents related to safety and environment over the period are discussed and evaluated. The paper notes that relatively speaking, in spite of the Bomu 2 and Funiwa V oil well blow-outs in 1970 and 1980 respectively which caused extensive environmental damages and the Anieze, Oniku and KC 1 gas well blow-out of 1972, 1975 and 1989 respectively, which resulted in the loss of the rigs drilling the locations concerned, the safety performance records in the Nigerian oil and gas exploration and production activities in the past thirty-five years have been satisfactory compared with the records of similar operations in most other parts of the world

  19. Preliminary results of the BTF-104 experiment: an in-reactor test of fuel behaviour and fission-product release and transport under LOCA/LOECC conditions

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, L W; Elder, P H; Devaal, J W; Irish, J D; Yamazaki, A R [Atomic Energy of Canada Ltd., Chalk River, ON (Canada)

    1996-12-31

    The BTF-104 experiment is one of a series of in-reactor tests being performed to measure fuel behaviour and fission-product release from nuclear fuel subjected to accident conditions. The primary objective of the BTF-104 experiment was to measure fission-product releases from a CANDU-sized fuel element under combined Loss-of-Coolant Accident (LOCA) and Loss-of-Emergency-Core-Cooling (LOECC) conditions at an average fuel temperature of about 1550 deg C. The preliminary results of the BTF-104 experiment are presented in this paper. (author). 6 refs., 12 figs.

  20. Patient preference for a long-acting recombinant FSH product in ovarian hyperstimulation in IVF: a discrete choice experiment.

    Science.gov (United States)

    van den Wijngaard, L; Rodijk, I C M; van der Veen, F; Gooskens-van Erven, M H W; Koks, C A M; Verhoeve, H R; Mol, B W J; van Wely, M; Mochtar, M H

    2015-02-01

    What factors or attributes of a long-acting recombinant FSH (rFSH) or daily-administrated rFSH influence women's preferences IVF? Patients' preferences for rFSH products are primary influenced by the attribute 'number of injections', but a low 'number of injections' is exchanged for a high 'number of injections' at a 6.2% decrease in 'risk of cycle cancellation due to low response' and at a 4.5% decrease in 'chance of OHSS'. Injections of long-acting rFSH have been claimed to be preferred over daily-administrated rFSH injections, but patient preference studies to underpin this assumption have not been performed. A discrete choice experiment (DCE) was created to assess women's preference for long-acting or daily-administrated rFSH under varying attributes of efficiency, safety and burden. The selected attributes were the 'total number of injections', 'chance of ovarian hyperstimulation syndrome (OHSS)' and the 'risk of cycle cancellation due to low response'. Questionnaires were handed out during information gathering sessions in one academic hospital and two teaching hospitals in The Netherlands between April 2011 and April 2012. Women at the start of their first IVF treatment were asked to participate in this patient preference study. Participation was voluntary. We analysed the data by using mixed logit models to estimate the utility of each attribute. Questionnaires (n = 125) were handed out with a response rate of 77% (97/125). Four respondents did not complete the questionnaire. Hence, there were 93 questionnaires available for analysis. All attributes significantly influenced women's preference. Overall, the lower 'number of injections' was preferred above the higher 'number of injections' (mean coefficient 1.25; P lower 'number of injections' for a higher 'number of injections' when gaining a 6.2% reduction in 'cycle cancellation due to low response', or a 4.5% reduction in 'chance of OHSS'. The generalizability of this DCE is limited in time-span. Women may

  1. Measurement of the electroweak top quark production cross section and the CKM matrix element Vtb with the D0 experiment

    International Nuclear Information System (INIS)

    Kirsch, Matthias

    2009-01-01

    At particle accelerators the Standard Model has been tested and will be tested further to a great precision. The data analyzed in this thesis have been collected at the world's highest energetic-collider, the Tevatron, located at the Fermi National Accelerator Laboratory (FNAL) in the vicinity of Chicago, IL, USA. There, protons and antiprotons are collided at a center-of-mass energy of √s = 1.96 TeV. The discovery of the top quark was one of the remarkable results not only for the CDF and D0 experiments at the Tevatron collider, but also for the Standard Model, which had predicted the existence of the top quark because of symmetry arguments long before already. Still, the Tevatron is the only facility able to produce top quarks. The predominant production mechanism of top quarks is the production of a top-antitop quark pair via the strong force. However, the Standard Model also allows the production of single top quarks via the electroweak interaction. This process features the unique opportunity to measure the |V tb | matrix element of the Cabbibo-Kobayashi-Maskawa (CKM) matrix directly, without assuming unitarity of the matrix or assuming that the number of quark generations is three. Hence, the measurement of the cross section of electroweak top quark production is more than the technical challenge to extract a physics process that only occurs one out of ten billion collisions. It is also an important test of the V-A structure of the electroweak interaction and a potential window to physics beyond the Standard Model in the case where the measurement of |V tb | would result in a value significantly different from 1, the value predicted by the Standard Model. At the Tevatron two production processes contribute significantly to the production of single top quarks: the production via the t-channel, also called W-gluon fusion, and the production via the s-channel, known as well as W* process. This analysis searches for the combined s+t channel production cross

  2. Measurement of the electroweak top quark production cross section and the CKM matrix element Vtb with the D0 experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kirsch, Matthias [RWTH Aachen Univ. (Germany)

    2009-06-29

    At particle accelerators the Standard Model has been tested and will be tested further to a great precision. The data analyzed in this thesis have been collected at the world's highest energetic-collider, the Tevatron, located at the Fermi National Accelerator Laboratory (FNAL) in the vicinity of Chicago, IL, USA. There, protons and antiprotons are collided at a center-of-mass energy of {radical}s = 1.96 TeV. The discovery of the top quark was one of the remarkable results not only for the CDF and D0 experiments at the Tevatron collider, but also for the Standard Model, which had predicted the existence of the top quark because of symmetry arguments long before already. Still, the Tevatron is the only facility able to produce top quarks. The predominant production mechanism of top quarks is the production of a top-antitop quark pair via the strong force. However, the Standard Model also allows the production of single top quarks via the electroweak interaction. This process features the unique opportunity to measure the |Vtb| matrix element of the Cabbibo-Kobayashi-Maskawa (CKM) matrix directly, without assuming unitarity of the matrix or assuming that the number of quark generations is three. Hence, the measurement of the cross section of electroweak top quark production is more than the technical challenge to extract a physics process that only occurs one out of ten billion collisions. It is also an important test of the V-A structure of the electroweak interaction and a potential window to physics beyond the Standard Model in the case where the measurement of |V{sub tb}| would result in a value significantly different from 1, the value predicted by the Standard Model. At the Tevatron two production processes contribute significantly to the production of single top quarks: the production via the t-channel, also called W-gluon fusion, and the production via the s-channel, known as well as W* process. This analysis searches for the combined s

  3. Measurement of the charmonium production and energy calibration for electrons with the ATLAS experiment; Messung der Charmonium-Produktion und Energiekalibration fuer Elektronen mit dem Atlas-Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Handel, Carsten

    2011-11-29

    The cross section of Charmonium production was measured using data from pp collisions at {radical}(s)=7 TeV taken by the Atlas experiment at the LHC in 2010. To improve the necessary knowledge of the detector performance, a calibration of the energy was performed. Using electrons from decays of the Charmonium, the energy scale of the electromagnetic calorimeters was studied at low energies. After applying the calibration, deviations in the energy measurement were found to be lower than 0.5% by comparing with energies determined in Monte Carlo simulations.rnrnrnWith an integrated luminosity of 2.2 pb{sup -1}, a first measurement of the inclusive cross section of the process pp{yields}J/{psi}(e{sup +}e{sup -})+X at {radical}(s)=7 TeV was done. For this, the accessible region of transverse momenta p{sub T,ee}>7 GeV and of rapidities vertical stroke y{sub ee} vertical stroke <2.4 was used. Differential cross sections for the transverse momentum p{sub T,ee}, and for the rapidity vertical stroke y{sub ee} vertical stroke were determined. Integration of the differential cross sections yields the values (85.1{+-}1.9{sub stat}{+-}11.2{sub syst}{+-} 2.9{sub Lum}) nb, and (75.4 {+-} 1.6{sub stat} {+-} 11.9{sub syst} {+-} 2.6{sub Lum}) nb for {sigma} (pp{yields}J/{psi}X)BR(J/{psi}{yields}e{sup +}e{sup -}), being compatible within systematics. Comparisons with measurements of the process pp{yields} J/{psi}({mu}{sup +}{mu}{sup -})+X done by Atlas and CMS have shown good agreement. To compare with theory, predictions from different models in next-to-leading order, and partially considering contributions in next-to-next-to-leading order were combined. Comparisons show a good agreement when taking into account contributions in next-to-next-to-leading order.

  4. Production of strange neutral particles and measurement of the polarization of {lambda} in the NOMAD experiment at CERN; Etude de la production des particules neutres etranges et mesure de la polarisation du {lambda} dans l'experience NOMAD au CERN

    Energy Technology Data Exchange (ETDEWEB)

    Lachaud, C

    2000-05-01

    The experiment NOMAD (CERN) is dedicated to the study of the neutrino-nucleon interaction. In these interactions many strange particles are produced: particularly K{sub s}{sup 0}, {lambda} and {lambda}-bar that are more easily detectable and this work is dedicated to them. The study of the polarization of {lambda} allows to go back to the measurements of spin transfer that are not well known. The identification of strange particles is difficult, 2 methods have been used in this work: likelihood ratios and {alpha}-asymmetry method. Once neutral strange particles were identified, their production rate (global and differential) have been made out, K{sup *{+-}}, and {sigma}{sup *{+-}} resonances and the decay of {xi} have been revealed. The second part of this work deals with the measurement of {lambda} polarization. The quality of the reconstruction of events and the cumulated statistics data allowed to give an accurate value of {lambda} polarization. A thorough study of the transverse polarization has been made and we see a dependence of the transverse impulse of {lambda} on the hadronic jet similar to that observed in hadronic collisions.

  5. Mineralogical investigations of the interaction between iron corrosion products and bentonite from the NF-PRO Experiments (Phase 2)

    Energy Technology Data Exchange (ETDEWEB)

    Milodowski, A.E.; Cave, M.R.; Kemp, S.J.; Taylor, B.H.; Green, K.A.; Williams, C.L.; Shaw, R.A.; Gowing, C.J.B.; Eatherington, N.D. (British Geological Survey (United Kingdom))

    2009-01-15

    present from the original MX-80 bentonite but part of this will also probably be secondary magnetite formed as a corrosion product of the steel. Nevertheless, sequential chemical extraction analyses also suggest that a large proportion of the iron (11-38%) may be present within the silicate/clay mineral lattice. The implication of this would be that there has been significant conversion of the original montmorillonite to an Fe-rich clay mineral within these alteration haloes. Although XRD does not detect very much change in clay mineralogy, and suggests that the smectite in the altered bentonite is dioctahedral, it is likely that the subsampling for XRD analysis was on too coarse a scale to be able to resolve the alteration within these very narrow reaction zones around the corroded wires. The alteration observed around the corroded steel wires in experiments NFC4, NFC7 and NFC13 is more complex than that in NFC1 or earlier experiments studied in Phase 1 or previously by Smart et al. 2006. The reacted bentonite from these experiments exhibited the formation of a Mg-Fe-rich clay mineral or aluminosilicate alteration product. This was formed within the Fe-enriched alteration halo but appears to have formed relatively early and was subsequently partially overprinted or replaced by more Fe-rich aluminosilicate. EDXA microchemical mapping did suggest some slight Mg enhancement in the reacted bentonite from NFC1 but no discrete Mg-rich phase was detected. Whilst Mg may potentially have been derived from the 'Allard' reference water used in experiment NFC4, in the case of NFC7 and NFC13 it could only have been derived from the breakdown of the bentonite itself since the porefluid only contained NaCl in these two experiments. XRD observations indicated a slight increase in d002/d003 peak ratio, which could possibly be accounted for by a small amount of substitution of Fe into the octahedral layers of the smectite. This is not supported by exchangeable cation analyses

  6. Computational analysis of modern HTGR fuel performance and fission product release during the HFR-EU1 irradiation experiment

    Energy Technology Data Exchange (ETDEWEB)

    Verfondern, Karl, E-mail: k.verfondern@fz-juelich.de [Research Center Jülich, Institute of Energy and Climate Research, 52425 Jülich (Germany); Xhonneux, André, E-mail: xhonneux@lrst.rwth-aachen.de [Research Center Jülich, Institute of Energy and Climate Research, 52425 Jülich (Germany); Nabielek, Heinz, E-mail: heinznabielek@me.com [Research Center Jülich, Monschauerstrasse 61, 52355 Düren (Germany); Allelein, Hans-Josef, E-mail: h.j.allelein@fz-juelich.de [Research Center Jülich, Institute of Energy and Climate Research, 52425 Jülich (Germany); RWTH Aachen, Chair for Reactor Safety and Reactor Technology, 52072 Aachen (Germany)

    2014-07-01

    Highlights: • HFR-EU1 irradiation test demonstrates high quality of HTGR spherical fuel elements. • Irradiation performance is in good agreement with German fuel performance modeling. • International benchmark exercise expected first particle to fail at ∼13–17% FIMA. • EOL silver release is predicted to be in the percentage range. • EOL cesium and strontium are expected to remain at a low level. - Abstract: Various countries engaged in the development and fabrication of modern HTGR fuel have initiated activities of modeling the fuel and fission product release behavior with the aim of predicting the fuel performance under HTGR operating and accident conditions. Verification and validation studies are conducted by code-to-code benchmarking and code-to-experiment comparisons as part of international exercises. The methodology developed in Germany since the 1980s represents valuable and efficient tools to describe fission product release from spherical fuel elements and TRISO fuel performance, respectively, under given conditions. Continued application to new results of irradiation and accident simulation testing demonstrates the appropriateness of the models in terms of a conservative estimation of the source term as part of interactions with HTGR licensing authorities. Within the European irradiation testing program for HTGR fuel and as part of the former EU RAPHAEL project, the HFR-EU1 irradiation experiment explores the potential for high performance of the presently existing German and newly produced Chinese fuel spheres under defined conditions up to high burnups. The fuel irradiation was completed in 2010. Test samples are prepared for further postirradiation examinations (PIE) including heatup simulation testing in the KÜFA-II furnace at the JRC-ITU, Karlsruhe, to be conducted within the on-going ARCHER Project of the European Commission. The paper will describe the application of the German computer models to the HFR-EU1 irradiation test and

  7. Potential Water Retention Capacity as a Factor in Silage Effluent Control: Experiments with High Moisture By-product Feedstuffs

    Science.gov (United States)

    Razak, Okine Abdul; Masaaki, Hanada; Yimamu, Aibibula; Meiji, Okamoto

    2012-01-01

    The role of moisture absorptive capacity of pre-silage material and its relationship with silage effluent in high moisture by-product feedstuffs (HMBF) is assessed. The term water retention capacity which is sometimes used in explaining the rate of effluent control in ensilage may be inadequate, since it accounts exclusively for the capacity of an absorbent incorporated into a pre-silage material prior to ensiling, without consideration to how much the pre-silage material can release. A new terminology, ‘potential water retention capacity’ (PWRC), which attempts to address this shortcoming, is proposed. Data were pooled from a series of experiments conducted separately over a period of five years using laboratory silos with four categories of agro by-products (n = 27) with differing moisture contents (highest 96.9%, lowest 78.1% in fresh matter, respectively), and their silages (n = 81). These were from a vegetable source (Daikon, Raphanus sativus), a root tuber source (potato pulp), a fruit source (apple pomace) and a cereal source (brewer’s grain), respectively. The pre-silage materials were adjusted with dry in-silo absorbents consisting wheat straw, wheat or rice bran, beet pulp and bean stalks. The pooled mean for the moisture contents of all pre-silage materials was 78.3% (±10.3). Silage effluent decreased (p<0.01), with increase in PWRC of pre-silage material. The theoretical moisture content and PWRC of pre-silage material necessary to stem effluent flow completely in HMBF silage was 69.1% and 82.9 g/100 g in fresh matter, respectively. The high correlation (r = 0.76) between PWRC of ensiled material and silage effluent indicated that the latter is an important factor in silage-effluent relationship. PMID:25049587

  8. IEA-R1 Nuclear Research Reactor: 58 Years of Operating Experience and Utilization for Research, Teaching and Radioisotopes Production

    Energy Technology Data Exchange (ETDEWEB)

    Cardenas, Jose Patricio Nahuel; Filho, Tufic Madi; Saxena, Rajendra; Filho, Walter Ricci [Nuclear and Energy Research Institute, IPEN-CNEN/SP, Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP, Av. Prof. Lineu Prestes 2242 Cid Universitaria CEP: 05508-000- Sao Paulo-SP (Brazil)

    2015-07-01

    IEA-R1 research reactor at the Instituto de Pesquisas Energeticas e Nucleares (Nuclear and Energy Research Institute) IPEN, Sao Paulo, Brazil is the largest power research reactor in Brazil, with a maximum power rating of 5 MWth. It is being used for basic and applied research in the nuclear and neutron related sciences, for the production of radioisotopes for medical and industrial applications, and for providing services of neutron activation analysis, real time neutron radiography, and neutron transmutation doping of silicon. IEA-R1 is a swimming pool reactor, with light water as the coolant and moderator, and graphite and beryllium as reflectors. The reactor was commissioned on September 16, 1957 and achieved its first criticality. It is currently operating at 4.5 MWth with a 60-hour cycle per week. In the early sixties, IPEN produced {sup 131}I, {sup 32}P, {sup 198}Au, {sup 24}Na, {sup 35}S, {sup 51}Cr and labeled compounds for medical use. During the past several years, a concerted effort has been made in order to upgrade the reactor power to 5 MWth through refurbishment and modernization programs. One of the reasons for this decision was to produce {sup 99}Mo at IPEN. The reactor cycle will be gradually increased to 120 hours per week continuous operation. It is anticipated that these programs will assure the safe and sustainable operation of the IEA-R1 reactor for several more years, to produce important primary radioisotopes {sup 99}Mo, {sup 125}I, {sup 131}I, {sup 153}Sm and {sup 192}Ir. Currently, all aspects of dealing with fuel element fabrication, fuel transportation, isotope processing, and spent fuel storage are handled by IPEN at the site. The reactor modernization program is slated for completion by 2015. This paper describes 58 years of operating experience and utilization of the IEA-R1 research reactor for research, teaching and radioisotopes production. (authors)

  9. Potential Water Retention Capacity as a Factor in Silage Effluent Control: Experiments with High Moisture By-product Feedstuffs.

    Science.gov (United States)

    Razak, Okine Abdul; Masaaki, Hanada; Yimamu, Aibibula; Meiji, Okamoto

    2012-04-01

    The role of moisture absorptive capacity of pre-silage material and its relationship with silage effluent in high moisture by-product feedstuffs (HMBF) is assessed. The term water retention capacity which is sometimes used in explaining the rate of effluent control in ensilage may be inadequate, since it accounts exclusively for the capacity of an absorbent incorporated into a pre-silage material prior to ensiling, without consideration to how much the pre-silage material can release. A new terminology, 'potential water retention capacity' (PWRC), which attempts to address this shortcoming, is proposed. Data were pooled from a series of experiments conducted separately over a period of five years using laboratory silos with four categories of agro by-products (n = 27) with differing moisture contents (highest 96.9%, lowest 78.1% in fresh matter, respectively), and their silages (n = 81). These were from a vegetable source (Daikon, Raphanus sativus), a root tuber source (potato pulp), a fruit source (apple pomace) and a cereal source (brewer's grain), respectively. The pre-silage materials were adjusted with dry in-silo absorbents consisting wheat straw, wheat or rice bran, beet pulp and bean stalks. The pooled mean for the moisture contents of all pre-silage materials was 78.3% (±10.3). Silage effluent decreased (p<0.01), with increase in PWRC of pre-silage material. The theoretical moisture content and PWRC of pre-silage material necessary to stem effluent flow completely in HMBF silage was 69.1% and 82.9 g/100 g in fresh matter, respectively. The high correlation (r = 0.76) between PWRC of ensiled material and silage effluent indicated that the latter is an important factor in silage-effluent relationship.

  10. Potential Water Retention Capacity as a Factor in Silage Effluent Control: Experiments with High Moisture By-product Feedstuffs

    Directory of Open Access Journals (Sweden)

    Okine Abdul Razak

    2012-04-01

    Full Text Available The role of moisture absorptive capacity of pre-silage material and its relationship with silage effluent in high moisture by-product feedstuffs (HMBF is assessed. The term water retention capacity which is sometimes used in explaining the rate of effluent control in ensilage may be inadequate, since it accounts exclusively for the capacity of an absorbent incorporated into a pre-silage material prior to ensiling, without consideration to how much the pre-silage material can release. A new terminology, ‘potential water retention capacity’ (PWRC, which attempts to address this shortcoming, is proposed. Data were pooled from a series of experiments conducted separately over a period of five years using laboratory silos with four categories of agro by-products (n = 27 with differing moisture contents (highest 96.9%, lowest 78.1% in fresh matter, respectively, and their silages (n = 81. These were from a vegetable source (Daikon, Raphanus sativus, a root tuber source (potato pulp, a fruit source (apple pomace and a cereal source (brewer’s grain, respectively. The pre-silage materials were adjusted with dry in-silo absorbents consisting wheat straw, wheat or rice bran, beet pulp and bean stalks. The pooled mean for the moisture contents of all pre-silage materials was 78.3% (±10.3. Silage effluent decreased (p<0.01, with increase in PWRC of pre-silage material. The theoretical moisture content and PWRC of pre-silage material necessary to stem effluent flow completely in HMBF silage was 69.1% and 82.9 g/100 g in fresh matter, respectively. The high correlation (r = 0.76 between PWRC of ensiled material and silage effluent indicated that the latter is an important factor in silage-effluent relationship.

  11. First measurement of the W production cross-section and its charge asymmetry with the ATLAS experiment

    International Nuclear Information System (INIS)

    Petit, E.

    2011-09-01

    The ATLAS detector is a multi-purpose experiment located at one of the collision points of the LHC, at CERN. The detector is complete and acquiring data since June 2008. The commissioning of the calorimeter system has been possible since then, in particular through the study of the 'missing transverse energy' variable. This variable is essential for precision measurements of the Standard Model, and for the search of New Physics; it was then tested in situ for the first time. The detector was ready for the first LHC collisions at the end of 2009, and showed good performances, in particular when created by minimum bias events. With the collision data, it was also possible to study the electron performances, in particular the identification variables and the material before the calorimeter. The first collisions at 7 TeV centre-of-mass energy allowed us to study the properties of W bosons. After a few month of data taking, this particle was observed and the production cross-section was measured. The main issue of this study was the assessment of the systematic uncertainties due to the electron and to the missing transverse energy. The measured value of the production cross-section is σ W .BR(W→eν)=(10.51±0.34(stat)±0.81(syst)±1.16(lumi)) nb With all the data recorded in 2010, the W boson charge asymmetry was also measured. The measured value of charge asymmetry is A e =0.201±0.003(stat)±0.023(syst). This measurement is important for the determination of the parton distribution functions of the proton, which are of utmost importance for the understanding of hadronic collisions at the LHC

  12. Peculiarities occurrence and microstrip gas chambers studied through experiment WA97; La production d`etrangete et les chambres gazeuses a micropistes dans le cadre de l`experience WA97

    Energy Technology Data Exchange (ETDEWEB)

    Kachelhoffer, T.

    1995-04-01

    This paper presents the studies on development of a Monte-Carlo type generator used for inclusive production of odd baryons and antibaryons through proton- proton and proton- nucleus collisions. Experiment WA97 consisted in designing simulation software for MSGCs (Micro-strips Gas Chambers) as well as the redefining of particle paths with the help of these chambers. This work made it possible to design the MSGC detector for experiment WA97. (TEC). 71 refs., 88 figs.

  13. Study of D* charmed meson production in Z0 boson decays observed by the DELPHI experiment at LEP

    International Nuclear Information System (INIS)

    Benedic, D.

    1991-12-01

    The work presented in this thesis has been performed on the DELPHI experiment, at the CERN large electron-positron collider LEP. The main purpose of this thesis is the study of charmed mesons D * produced in the hadronic decays of the Z neutral. At first we will describe the theoretical framework by presenting the Standard Model, the fragmentation models and the heavy quark physics. The DELPHI detector is then described and especially the track detectors which are the main detectors in our analysis. Two studies of charged D * mesons are then presented. In the first one around 170 D *+ decaying into D neutral π + were reconstructed, where the D neutral decays into K - π + or K - π + π - π + . From the X E = E(D *+ )/E beam distribution, the production rate of D *+ in Z neutral hadronic decays is computed. Fixing the b quark fragmentation function, the D *+ rate from charm quark and the average E > c are measured. The partial width Γ c is also measured. The following results were obtained: Br(Z had → D *+ X). B * B o = (4.54 + - 0.54 (stat) ± 0.55(syst)).10 -3 E > c 0.51 ± 0.03(stat) ± 0.02(syst) Γ c /Γ had = 0.157 ± 0.031(stat) ± 0.041(syst) where B * B o is the product Br(D *+ → D neutral π + ).Br(D neutral → K - π + ). In the second study the production rate of cantic events is derived from the inclusive analysis of charged pions coming from the decay of charmed mesons D *+ → D neutral π + where the π + is constrained by kinematics to have a low P T with respect to the jet axis. The amount of D *+ counted by this method is ten times greater than in the first study. We have thus measured: Γ c /Γ had = 0.122 ± 0.011stat) ± 0.028(syst)

  14. ThermoData Engine (TDE): software implementation of the dynamic data evaluation concept. 5. Experiment planning and product design.

    Science.gov (United States)

    Diky, Vladimir; Chirico, Robert D; Kazakov, Andrei F; Muzny, Chris D; Magee, Joseph W; Abdulagatov, Ilmutdin; Kang, Jeong Won; Kroenlein, Kenneth; Frenkel, Michael

    2011-01-24

    ThermoData Engine (TDE) is the first full-scale software implementation of the dynamic data evaluation concept, as reported recently in this journal. In the present paper, we describe development of an algorithmic approach to assist experiment planning through assessment of the existing body of knowledge, including availability of experimental thermophysical property data, variable ranges studied, associated uncertainties, state of prediction methods, and parameters for deployment of prediction methods and how these parameters can be obtained using targeted measurements, etc., and, indeed, how the intended measurement may address the underlying scientific or engineering problem under consideration. A second new feature described here is the application of the software capabilities for aid in the design of chemical products through identification of chemical systems possessing desired values of thermophysical properties within defined ranges of tolerance. The algorithms and their software implementation to achieve this are described. Finally, implementation of a new data validation and weighting system is described for vapor-liquid equilibrium (VLE) data, and directions for future enhancements are outlined.

  15. A novel approach to precision measurements of the top quark-antiquark pair production cross section with the ATLAS experiment

    International Nuclear Information System (INIS)

    Lange, Clemens Gregor

    2013-01-01

    This doctoral thesis presents three measurements of the top quark-antiquark pair production cross section in proton-proton collisions at a centre-of-mass energy of √(s)=7 TeV recorded in 2010 and 2011 with the ATLAS Experiment at the Large Hadron Collider. Events are selected in the single lepton topology by requiring an electron or muon, large missing transverse momentum and at least three jets. While one analysis relies on kinematic information only to discriminate the top quark-antiquark pair signal from the background processes, the other two also make use of b-tagging information. With the help of multivariate methods the most precise measurements in this topology are obtained. This is for two of the measurements in particular possible due to the use of a profile likelihood method which is studied in detail. For the first time a fiducial inclusive cross section measurement for top quark events is performed allowing a measurement almost independent of theoretical uncertainties. All measurements are in agreement with theory predictions performed in perturbation theory at approximate NNLO.

  16. Product state resolved excitation spectroscopy of He-, Ne-, and Ar-Br2 linear isomers: experiment and theory.

    Science.gov (United States)

    Pio, Jordan M; van der Veer, Wytze E; Bieler, Craig R; Janda, Kenneth C

    2008-04-07

    Valence excitation spectra for the linear isomers of He-, Ne-, and Ar-Br2 are reported and compared to a two-dimensional simulation using the currently available potential energy surfaces. Excitation spectra from the ground electronic state to the region of the inner turning point of the Rg-Br2 (B,nu') stretching coordinate are recorded while probing the asymptotic Br2 (B,nu') state. Each spectrum is a broad continuum extending over hundreds of wavenumbers, becoming broader and more blueshifted as the rare gas atom is changed from He to Ne to Ar. In the case of Ne-Br2, the threshold for producing the asymptotic product state reveals the X-state linear isomer bond energy to be 71+/-3 cm(-1). The qualitative agreement between experiment and theory shows that the spectra can be correctly regarded as revealing the one-atom solvent shifts and also provides new insight into the one-atom cage effect on the halogen vibrational relaxation. The measured spectra provide data to test future ab initio potential energy surfaces in the interaction of rare gas atoms with the halogen valence excited state.

  17. A Design of Experiment approach to predict product and process parameters for a spray dried influenza vaccine.

    Science.gov (United States)

    Kanojia, Gaurav; Willems, Geert-Jan; Frijlink, Henderik W; Kersten, Gideon F A; Soema, Peter C; Amorij, Jean-Pierre

    2016-09-25

    Spray dried vaccine formulations might be an alternative to traditional lyophilized vaccines. Compared to lyophilization, spray drying is a fast and cheap process extensively used for drying biologicals. The current study provides an approach that utilizes Design of Experiments for spray drying process to stabilize whole inactivated influenza virus (WIV) vaccine. The approach included systematically screening and optimizing the spray drying process variables, determining the desired process parameters and predicting product quality parameters. The process parameters inlet air temperature, nozzle gas flow rate and feed flow rate and their effect on WIV vaccine powder characteristics such as particle size, residual moisture content (RMC) and powder yield were investigated. Vaccine powders with a broad range of physical characteristics (RMC 1.2-4.9%, particle size 2.4-8.5μm and powder yield 42-82%) were obtained. WIV showed no significant loss in antigenicity as revealed by hemagglutination test. Furthermore, descriptive models generated by DoE software could be used to determine and select (set) spray drying process parameter. This was used to generate a dried WIV powder with predefined (predicted) characteristics. Moreover, the spray dried vaccine powders retained their antigenic stability even after storage for 3 months at 60°C. The approach used here enabled the generation of a thermostable, antigenic WIV vaccine powder with desired physical characteristics that could be potentially used for pulmonary administration. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  18. Z$^{0}$Z$^{0}$ production cross section measurement in the four lepton decay channel at CDF experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bauce, Matteo [Padua U.

    2009-01-01

    This thesis describes the measurement of Z 0 Z 0 production cross section in pp collisions at the CDF (Compact Detector at Fermilab) experiment at Tevatron. The determination of this quantity is important to test Standard Model predictions of Electro-Weak couplings. Moreover the Z$^{0}$Z^{0}$ reconstruction is an important step for the Higgs boson searches in the high mass region. The cross section measurement has been done in the four massive lepton decay channel that has a small branching ratio but it is characterized by a very low background contribution. The search for Z$^{0$Z$^{0}$ $\\rightarrow$ $llll$ ($l=e,\\mu$) has been performed using 4.8 fb$^{-1}$ of data collected by CDF using lepton triggers. The number of expected signal events is 4.68 $\\pm$ 0.78 while the background contributes with 0.041 $\\pm$ 0.033 events. We observe 5 events, that corresponds to a significance of 5.70 $\\sigma$. This is the first observation of a Z$^{0}$Z$^{0}$ signal at CDF. With these events we measure a cross section of 1.56$^{+0.80}_{-0.63}$ (stat.) $\\pm$ 0.25(syst.) pb, in agreement with the Standard Model value 1.4 $\\pm$ 0.1 pb at Next to Leading Order.

  19. A table top experiment to investigate production and properties of a plasma confined by a dipole magnet.

    Science.gov (United States)

    Baitha, Anuj Ram; Kumar, Ashwani; Bhattacharjee, Sudeep

    2018-02-01

    We report a table top experiment to investigate production and properties of a plasma confined by a dipole magnet. A water cooled, strong, cylindrical permanent magnet (NdFeB) magnetized along the axial direction and having a surface magnetic field of ∼0.5 T is employed to create a dipole magnetic field. The plasma is created by electron cyclotron resonance heating. Visual observations of the plasma indicate that radiation belts appear due to trapped particles, similar to the earth's magnetosphere. The electron temperature lies in the range 2-13 eV and is hotter near the magnets and in a downstream region. It is found that the plasma (ion) density reaches a value close to 2 × 10 11 cm -3 and peaks at a radial distance about 3 cm from the magnet. The plasma beta β (β = plasma pressure/magnetic pressure) increases radially outward, and the maximum β for the present experimental system is ∼2%. It is also found that the singly charged ions are dominant in the discharge.

  20. W and Z Production in pp Collisions at 7 TeV with the ATLAS Experiment at the LHC

    CERN Document Server

    Outschoorn, V I Martinez

    2010-01-01

    The observation of W and Z bosons and a measurement of the production cross sections in proton proton collisions at E_CM = 7 TeV are presented using data from the ATLAS experiment at the LHC. Results are based on 118 W -> lnu and 125 Z/gamma* -> ll (l=e,mu) candidate events corresponding to an integrated luminosity of about 17 nb^-1 and 225 nb^-1 respectively. The measured values of sigma_W x BR(W -> lnu) = 9.3 \\pm 0.9 (stat) \\pm 0.6 (syst) \\pm 1.0 (lumi) nb and sigma_Z/gamma* x BR(Z/gamma* -> ll, 66

  1. Production properties of K*(892) vector mesons and their spin alignment as measured in the NOMAD experiment

    CERN Document Server

    Chukanov, A; Popov, B; Astier, Pierre; Autiero, D; Baldisseri, Alberto; Baldo-Ceolin, M; Banner, M; Bassompierre, G; Benslama, K; Besson, N; Bird, I; Blumenfeld, B; Bobisut, F; Bouchez, J; Boyd, S; Bueno, A; Bunyatov, S; Camilleri, L L; Cardini, A; Cattaneo, P W; Cavasinni, V; Cervera-Villanueva, A; Challis, R; Collazuol, G; Conforto, G; Conta, C; Contalbrigo, M; Cousins, R; Daniels, D; Degaudenzi, H M; Del Prete, T; De Santo, A; Dignan, T; Di Lella, L; Do Couto e Silva, E; Dumarchez, J; Ellis, M; Feldman, G J; Ferrari, R; Ferrère, D; Flaminio, V; Fraternali, M; Gaillard, J M; Gangler, E; Geiser, A; Geppert, D; Gibin, D; Gninenko, S; Godley, A; Gómez-Cadenas, J J; Gosset, J; Gössling, C; Gouanère, M; Grant, A; Graziani, G; Guglielmi, A M; Hagner, C; Hernando, J; Hubbard, D; Hurst, P; Hyett, N; Iacopini, E; Joseph, C; Juget, F; Kent, N; Kirsanov, M; Klimov, O; Kokkonen, J; Kovzelev, A; Krasnoperov, A V; Lacaprara, S; Lachaud, C; Lakic, B; Lanza, A; La Rotonda, L; Laveder, M; Letessier-Selvon, A A; Lévy, J M; Linssen, Lucie; Ljubicic, A; Long, J; Lupi, A; Lyubushkin, V; Marchionni, A; Martelli, F; Méchain, X; Mendiburu, J P; Meyer, J P; Mezzetto, Mauro; Mishra, S R; Moorhead, G F; Nédélec, P; Nefedov, Yu; Nguyen-Mau, C; Orestano, D; Pastore, F; Peak, L S; Pennacchio, E; Pessard, H; Petti, R; Placci, A; Polesello, G; Pollmann, D; Polyarush, A Yu; Poulsen, C; Rebuffi, L; Renò, R; Rico, J; Riemann, P; Roda, C; Rubbia, André; Salvatore, F; Samoylov, O; Schahmaneche, K; Schmidt, B; Schmidt, T; Sconza, A; Sevior, M; Sillou, D; Soler, F J P; Sozzi, G; Steele, D; Stiegler, U; Stipcevic, M; Stolarczyk, T; Tareb-Reyes, M; Taylor, G N; Tereshchenko, V V; Toropin, A; Touchard, A M; Tovey, Stuart N; Tran, M T; Tsesmelis, E; Ulrichs, J; Vacavant, L; Valdata-Nappi, M; Valuev, V; Vannucci, F; Varvell, K E; Veltri, M; Vercesi, V; Vidal-Sitjes, G; Vieira, J M; Vinogradova, T; Weber, F V; Weisse, T; Wilson, F F; Winton, L J; Yabsley, B D; Zaccone, Henri; Zei, R; Zuber, K; Zuccon, P

    2006-01-01

    First measurements of K*(892) mesons production properties and their spin alignment in nu_mu charged current (CC) and neutral current (NC) interactions are presented. The analysis of the full data sample of the NOMAD experiment is performed in different kinematic regions. For K*+ and K*- mesons produced in nu_mu CC interactions and decaying into K0 pi+/- we have found the following yields per event: (2.6 +/- 0.2 (stat.) +/- 0.2 (syst.))% and (1.6 +/- 0.1 (stat.) +/- 0.1 (syst.))% respectively, while for the K*+ and K*- mesons produced in nu NC interactions the corresponding yields per event are: (2.5 +/- 0.3 (stat.) +/- 0.3 (syst.))% and (1.0 +/- 0.3 (stat.) +/- 0.2 (syst.))%. The results obtained for the rho00 parameter, 0.40 +/- 0.06 (stat) +/- 0.03 (syst) and 0.28 +/- 0.07 (stat) +/- 0.03 (syst) for K*+ and K*- produced in nu_mu CC interactions, are compared to theoretical predictions tuned on LEP measurements in e+e- annihilation at the Z0 pole. For K*+ mesons produced in nu NC interactions the measured r...

  2. Effect of Experience of Use on The Process of Formation of Stereotype Images on Shapes of Products

    Science.gov (United States)

    Kwak, Yong-Min; Yamanaka, Toshimasa

    It is necessary to explain the terms used in this research to help the readers better understand the contents of this research. Originally stereotype meant the lead plate cast from a mold of letterpress printing, but now it is used as a term indicating a simplified and fixed notion toward certain group “Knowledge in fixed form” or a term indicating an image simplified and generalized over the members of certain group.[1] Generally, stereotype is used in negative cases, but has both sides of positive and negative view.[2, 3] I believe that a research on the factors of forming stereotype[4] images commonly felt by a large number of persons may suggest a new research methodology for the areas which require high level of creative thinking such as areas of design and researches on emotions. Stereotype images appear between persons, groups and images of countries, enterprises and other organizations. For example, as we usually hear words saying ‘He maybe oo because he is from oo’, we have strong images of characteristics commonly held by the persons who belong to certain categories after tying regions and persons to dividing categories.[5, 6] In this research, I define such images as the stereotype images. This kind of phenomenon appears for the articles used in daily lives. In this research, I established a hypothesis that stereotype images exist for products and underwent the process of verification through experiments.

  3. A table top experiment to investigate production and properties of a plasma confined by a dipole magnet

    Science.gov (United States)

    Baitha, Anuj Ram; Kumar, Ashwani; Bhattacharjee, Sudeep

    2018-02-01

    We report a table top experiment to investigate production and properties of a plasma confined by a dipole magnet. A water cooled, strong, cylindrical permanent magnet (NdFeB) magnetized along the axial direction and having a surface magnetic field of ˜0.5 T is employed to create a dipole magnetic field. The plasma is created by electron cyclotron resonance heating. Visual observations of the plasma indicate that radiation belts appear due to trapped particles, similar to the earth's magnetosphere. The electron temperature lies in the range 2-13 eV and is hotter near the magnets and in a downstream region. It is found that the plasma (ion) density reaches a value close to 2 × 1011 cm-3 and peaks at a radial distance about 3 cm from the magnet. The plasma beta β (β = plasma pressure/magnetic pressure) increases radially outward, and the maximum β for the present experimental system is ˜2%. It is also found that the singly charged ions are dominant in the discharge.

  4. Feasibility studies for the open-charm production in proton-antiproton reactions for the PANDA experiment

    Energy Technology Data Exchange (ETDEWEB)

    Vejdani, Solmaz [KVI-CART, University of Groningen (Netherlands); Forschungszentrum Juelich, Juelich (Germany); Collaboration: PANDA-Collaboration

    2016-07-01

    The PANDA experiment is one of the pillars of the future Facility for Antiproton and Ion Research (FAIR) in Darmstadt, Germany. The PANDA physics program is focused on answering fundamental questions related to Quantum Chromodynamics (QCD), mostly in the non-perturbative energy regime. Spectroscopy exploiting Λc-baryons that are composed of a heavy charm valence quark and two light valence quarks is an integral part of the PANDA physics program. Such systems can systematically provide information on various key features of QCD, such as heavy-quark symmetry, chiral symmetry breaking, and the nature of exotic states. In this work, the experimental feasibility of studying the production mechanisms of associative open-charm baryons in antiproton-proton annihilations is investigated by using Monte Carlo simulations. I present results obtained for the channel p anti p → Λ{sup -}{sub c}Λ{sub c}, highlighting the detector performances (efficiencies and resolutions) and the statistical significance that can be achieved with the foreseen luminosities.

  5. Measurement of associated Z0-boson and b-jet production in proton-proton collisions with the CMS experiment

    International Nuclear Information System (INIS)

    Hauk, Johannes

    2012-07-01

    In this thesis, data of proton-proton collisions at a centre-of-mass energy of √(s)=7 TeV, delivered by LHC and recorded with the CMS experiment in 2010 and 2011, is used to perform one technical and two physics analyses. The technical one develops and uses a method to estimate the precision of the knowledge of the true geometry of the CMS inner tracking system in 2011 data. It is used to quantify the remaining deviation between assumed and true geometry, and this is employed in the reconstruction of trajectories of charged particles, and thus optimises the performance of CMS. The first physics analysis calculates the ratio of cross sections of top-pair production (t anti t) and inclusive Z 0 -boson production (i.e. Z 0 /γ* restricted to masses around the Z 0 peak) in their muonic decay modes - leading to two spatially isolated high-momentum muons - on the full 2010 dataset spanning 35.9 pb -1 . The advantage over absolute cross-section measurements is that common experimental or theoretical uncertainties cancel, like it is definitely the case for the measured luminosity. Furthermore, the t anti t cross section can be normalised using the ratio and the theoretical Z 0 cross section, instead of the luminosity measurement. The processes are separated by the invariant dimuon mass, which shows a peak around the Z 0 mass for the Z 0 events, and a smooth wide curve for t anti t events. The final combination of the t anti t cross section measurements normalised to luminosity, respectively to the Z 0 as standard candle, results in improved precision. The second physics analysis is the cross-section measurement of associated Z 0 -boson and b-jet production (bZ 0 ) in 2.2 fb -1 of 2011 data, again in the decay channel Z 0 →μ + μ - , but now requiring in addition the presence of at least one b-tagged jet. This process is very similar to t anti t, since both contain two muons and two b jets in the final state. Since their cross sections are also similar, both processes

  6. Application of 13C-labeling and 13C-13C COSY NMR experiments in the structure determination of a microbial natural product.

    Science.gov (United States)

    Kwon, Yun; Park, Sunghyouk; Shin, Jongheon; Oh, Dong-Chan

    2014-08-01

    The elucidation of the structures of complex natural products bearing many quaternary carbons remains challenging, even in this advanced spectroscopic era. (13)C-(13)C COSY NMR spectroscopy shows direct couplings between (13)C and (13)C, which comprise the backbone of a natural product. Thus, this type of experiment is particularly useful for natural products bearing consecutive quaternary carbons. However, the low sensitivity of (13)C-based NMR experiments, due to the low natural abundance of the (13)C nucleus, is problematic when applying these techniques. Our efforts in the (13)C labeling of a microbial natural product, cyclopiazonic acid (1), by feeding (13)C-labeled glucose to the fungal culture, enabled us to acquire (13)C-(13)C COSY NMR spectra on a milligram scale that clearly show the carbon backbone of the compound. This is the first application of (13)C-(13)C COSY NMR experiments for a natural product. The results suggest that (13)C-(13)C COSY NMR spectroscopy can be routinely used for the structure determination of microbial natural products by (13)C-enrichment of a compound with (13)C-glucose.

  7. Production of microspheres labeled with holmium-166 for liver cancer therapy: the preliminary experience at IPEN/CNEN-SP

    International Nuclear Information System (INIS)

    Costa, Renata F.; Azevedo, Mariangela B.M.; Nascimento, Nanci; Sene, Frank F.; Martinelli, Jose R.; Osso Junior, Joao A.

    2009-01-01

    Microspheres labeled with therapeutic radionuclides for malignancies of liver are widely used in many countries. The internal radionuclide therapy uses a permanently implanted device, such as Therasphere R or SIR-Spheres R , or a biodegradable device that provides structural support for the radionuclide of choice and causes the tumor reduction. Three different types of material supports have been investigated, i.e., biodegradable polymer-based, glass-based and resin-based microspheres. Nowadays there is a project concerning the labeling of these 3 materials with 166 Ho being developed at IPEN-CNEN/SP and coordinated by the Radiopharmacy Directory. 166 Ho(t 1/2 =26.8 h) is a beta minus emitter (E max =1.84 MeV), with right properties for radiotherapy and can be produced with the low power Brazilian Nuclear Reactor IEA-R1m. The aim of this work is to describe the stage of development of this project. The initial experience used resin-based microspheres, a cation exchange resin labeled with 166 Ho, it showed the essential characteristics for liver therapy. Preliminary results of the preparation of glass-based microspheres labeled with 165 Ho showed that 5% of Ho 2 O 3 was incorporated in an aluminosilicate glass, through the process of spheronization by flame, which produced spherical microspheres with 20-40μm particle size. The preparation of biodegradable material, polymer-based microspheres, is in its initial stage and the objective is to prepare and label with 165 Ho different polymer-based microspheres. These combined efforts have been done to offer a national radiotherapeutic product for the the Brazilian nuclear medicine community at fair value and also to offer a viable possibility of treatment for patients affected by liver malignancies. (author)

  8. Gradient flux measurements of sea–air DMS transfer during the Surface Ocean Aerosol Production (SOAP experiment

    Directory of Open Access Journals (Sweden)

    M. J. Smith

    2018-04-01

    Full Text Available Direct measurements of marine dimethylsulfide (DMS fluxes are sparse, particularly in the Southern Ocean. The Surface Ocean Aerosol Production (SOAP voyage in February–March 2012 examined the distribution and flux of DMS in a biologically active frontal system in the southwest Pacific Ocean. Three distinct phytoplankton blooms were studied with oceanic DMS concentrations as high as 25 nmol L−1. Measurements of DMS fluxes were made using two independent methods: the eddy covariance (EC technique using atmospheric pressure chemical ionization–mass spectrometry (API-CIMS and the gradient flux (GF technique from an autonomous catamaran platform. Catamaran flux measurements are relatively unaffected by airflow distortion and are made close to the water surface, where gas gradients are largest. Flux measurements were complemented by near-surface hydrographic measurements to elucidate physical factors influencing DMS emission. Individual DMS fluxes derived by EC showed significant scatter and, at times, consistent departures from the Coupled Ocean–Atmosphere Response Experiment gas transfer algorithm (COAREG. A direct comparison between the two flux methods was carried out to separate instrumental effects from environmental effects and showed good agreement with a regression slope of 0.96 (r2 = 0.89. A period of abnormal downward atmospheric heat flux enhanced near-surface ocean stratification and reduced turbulent exchange, during which GF and EC transfer velocities showed good agreement but modelled COAREG values were significantly higher. The transfer velocity derived from near-surface ocean turbulence measurements on a spar buoy compared well with the COAREG model in general but showed less variation. This first direct comparison between EC and GF fluxes of DMS provides confidence in compilation of flux estimates from both techniques, as well as in the stable periods when the observations are not well predicted by the COAREG

  9. Production of microspheres labeled with holmium-166 for liver cancer therapy: the preliminary experience at IPEN/CNEN-SP

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Renata F.; Azevedo, Mariangela B.M.; Nascimento, Nanci; Sene, Frank F.; Martinelli, Jose R.; Osso Junior, Joao A., E-mail: renatafcosta@usp.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    Microspheres labeled with therapeutic radionuclides for malignancies of liver are widely used in many countries. The internal radionuclide therapy uses a permanently implanted device, such as Therasphere{sup R} or SIR-Spheres{sup R}, or a biodegradable device that provides structural support for the radionuclide of choice and causes the tumor reduction. Three different types of material supports have been investigated, i.e., biodegradable polymer-based, glass-based and resin-based microspheres. Nowadays there is a project concerning the labeling of these 3 materials with {sup 166}Ho being developed at IPEN-CNEN/SP and coordinated by the Radiopharmacy Directory. {sup 166}Ho(t{sub 1/2}=26.8 h) is a beta minus emitter (E{sub max}=1.84 MeV), with right properties for radiotherapy and can be produced with the low power Brazilian Nuclear Reactor IEA-R1m. The aim of this work is to describe the stage of development of this project. The initial experience used resin-based microspheres, a cation exchange resin labeled with {sup 166}Ho, it showed the essential characteristics for liver therapy. Preliminary results of the preparation of glass-based microspheres labeled with {sup 165}Ho showed that 5% of Ho{sub 2}O{sub 3} was incorporated in an aluminosilicate glass, through the process of spheronization by flame, which produced spherical microspheres with 20-40mum particle size. The preparation of biodegradable material, polymer-based microspheres, is in its initial stage and the objective is to prepare and label with {sup 165}Ho different polymer-based microspheres. These combined efforts have been done to offer a national radiotherapeutic product for the the Brazilian nuclear medicine community at fair value and also to offer a viable possibility of treatment for patients affected by liver malignancies. (author)

  10. Gradient flux measurements of sea-air DMS transfer during the Surface Ocean Aerosol Production (SOAP) experiment

    Science.gov (United States)

    Smith, Murray J.; Walker, Carolyn F.; Bell, Thomas G.; Harvey, Mike J.; Saltzman, Eric S.; Law, Cliff S.

    2018-04-01

    Direct measurements of marine dimethylsulfide (DMS) fluxes are sparse, particularly in the Southern Ocean. The Surface Ocean Aerosol Production (SOAP) voyage in February-March 2012 examined the distribution and flux of DMS in a biologically active frontal system in the southwest Pacific Ocean. Three distinct phytoplankton blooms were studied with oceanic DMS concentrations as high as 25 nmol L-1. Measurements of DMS fluxes were made using two independent methods: the eddy covariance (EC) technique using atmospheric pressure chemical ionization-mass spectrometry (API-CIMS) and the gradient flux (GF) technique from an autonomous catamaran platform. Catamaran flux measurements are relatively unaffected by airflow distortion and are made close to the water surface, where gas gradients are largest. Flux measurements were complemented by near-surface hydrographic measurements to elucidate physical factors influencing DMS emission. Individual DMS fluxes derived by EC showed significant scatter and, at times, consistent departures from the Coupled Ocean-Atmosphere Response Experiment gas transfer algorithm (COAREG). A direct comparison between the two flux methods was carried out to separate instrumental effects from environmental effects and showed good agreement with a regression slope of 0.96 (r2 = 0.89). A period of abnormal downward atmospheric heat flux enhanced near-surface ocean stratification and reduced turbulent exchange, during which GF and EC transfer velocities showed good agreement but modelled COAREG values were significantly higher. The transfer velocity derived from near-surface ocean turbulence measurements on a spar buoy compared well with the COAREG model in general but showed less variation. This first direct comparison between EC and GF fluxes of DMS provides confidence in compilation of flux estimates from both techniques, as well as in the stable periods when the observations are not well predicted by the COAREG model.

  11. Understory fern community structure, growth and spore production responses to a large-scale hurricane experiment in a Puerto Rico rainforest

    Science.gov (United States)

    Joanne M. Sharpe; Aaron B. Shiels

    2014-01-01

    Ferns are abundant in most rainforest understories yet their responses to hurricanes have not been well studied. Fern community structure, growth and spore production were monitored for two years before and five years after a large-scale experiment that simulated two key components of severe hurricane disturbance: canopy openness and debris deposition. The canopy was...

  12. Effects of water table position and plant functional group on plant community, aboveground production, and peat properties in a peatland mesocosm experiment (PEATcosm)

    Science.gov (United States)

    Lynette R. Potvin; Evan S. Kane; Rodney A. Chimner; Randall K. Kolka; Erik A. Lilleskov

    2015-01-01

    Aims Our objective was to assess the impacts of water table position and plant functional type on peat structure, plant community composition and aboveground plant production. Methods We initiated a full factorial experiment with 2 water table (WT) treatments (high and low) and 3 plant functional groups (PFG: sedge, Ericaceae,...

  13. Attitudes towards the use of GMOs in food production and willingness to buy cheese produced using GMOs for respondents with and without tasting experience

    DEFF Research Database (Denmark)

    Grunert, Klaus G.; Bech-Larsen, Tino; Lähteenmäki, Lisa

    European consumers are sceptical towards genetically modified organisms (GMOs) in food production, and their willingness to buy such products is low. Previous research also shows that these attitudes are quite resistant to attempts to change them by giving additional information. The aim of the s......European consumers are sceptical towards genetically modified organisms (GMOs) in food production, and their willingness to buy such products is low. Previous research also shows that these attitudes are quite resistant to attempts to change them by giving additional information. The aim...... of the study was to investigate if actual sensory experience with a (purportedly) GMO-based food product would influence consumers' attitude towards the use of GMOs in food production. An experiment was conducted in which subjects in the experimental group tasted cheeses, one of which was labelled as 'produced...... using GMOs.' The cheeses were selected in a way that ensured that the subject had a sensory preference for the GMO cheese. A control group tasted cheeses that were unlabelled. After the tasting, subjects completed a conjoint analysis task about cheese, in which the type of starter culture used (GMO...

  14. The North American Long-Term Soil Productivity Experiment: Coast-to-coast findings from the first decade

    Science.gov (United States)

    Robert F. Powers; Felipe G. Sanchez; D. Andrew Scott; Deborah Page-Dumroese

    2004-01-01

    The National Forest Management Act of 1976 mandates that a site’s productive capacity must be protected on federally managed lands. Monitoring the effects of management on a site’s productive capacity is not easy, and in 1989 a national program of Long-Term Soil Productivity (LTSP) research was established to assist National Forests toward this end. The LTSP program...

  15. Basic substances under EC 1107/2009 phytochemical regulation: experience with non-biocide and food products as biorationals

    Directory of Open Access Journals (Sweden)

    Marchand Patrice A.

    2016-07-01

    Full Text Available Basic Substances are a newly effective category of Plant Protection Product under EC Regulation No 1107/2009. The first approved application of Equisetum arvense L. opened Part C of Implementing Regulation (EU No 540/2011, which lists the basic substance approved. Although E. arvense was described as a fungicide extract, subsequent applications like chitosan were related to non-biocide molecules. Consequently, plant protection product data were collected from research on alternative or traditional crop protection methods. They are notably issued or derived from foodstuffs (plants, plant by-products, plant derived products, substances and derived substances from animal origin. Applications are currently submitted by our Institute, under evaluation at different stages of the approval process or already approved. Remarkably, this Basic Substance category under pesticide EU Regulation was surprisingly designed for these non-biocidal plant protection products. In fact, components described as the “active substance” of most of the actual applications are food products like sugars and lecithin. Basic Substance applications for these foodstuffs are therefore a straightforward way of easily gaining approval for them. Here we describe the approval context and detail the agricultural uses of theses food products as Biological Control Agents (BCAs or biorationals for crop protection. From all deposited or approved Basic Substance Application (BSA, a proof has been provided that non-biocide and food products via physical barrier or lure effects may be effective plant protection products with an acceptable low profile of concern for public and agricultural safety.

  16. Confirmatory experiments for the United States Department of Energy Accelerator Production of Tritium Program: Neutron, triton and radionuclide production by thick targets of lead and tungsten bombarded by 800 MeV protons

    International Nuclear Information System (INIS)

    Lisowski, P.W.; Cappiello, M.; Ullmann, J.L.; Gavron, A.; King, J.D.; Laird, R.; Mayo, D.; Waters, L.; Zoeller, C.; Staples, P.

    1994-01-01

    Neutron and Triton Production by 800 MeV Protons: The experiments presented in this report were performed in support of the Accelerator Production of Tritium (APT) project at the Los Alamos Weapons Neutron Research (WNR) facility in order to provide data to benchmark and validate physics simulations used in the APT target/blanket design. An experimental apparatus was built that incorporated many of the features of the neutron source region of the 3 He target/blanket. Those features included a tungsten neutron source, flux traps, neutron moderator, lead backstop, lead multiplying annulus, neutron absorbing blanket and a combination neutron de-coupler and tritium producing gas ( 3 He). The experiments were performed in two separate proton irradiations each with approximately 100 nA-hr of 800 MeV protons. The first irradiation was made with a small neutron moderating blanket, allowing the authors to measure tritium production in the 3 He gas by sampling, and counting the amount of tritium. The second irradiation was performed with a large neutron moderating blanket (light water with a 1% manganese sulfate solution) that allowed them to measure both the tritium production in the central region and the total neutron production. The authors did this by sampling and counting the tritium produced and by measuring the activation of the manganese solution. Results of the three tritium production measurements show large disagreements with each other and therefore with the values predicted using the LAHET-MCNP code system. The source of the discrepancies may lie with the sampling system or adsorption on the tungsten surfaces. The authors discuss tests that may resolve that issue. The data for the total neutron production measurement is much more consistent. Those results show excellent agreement between calculation and experiment

  17. Can Self-Determination Theory Explain What Underlies the Productive, Satisfying Learning Experiences of Collectivistically Oriented Korean Students?

    Science.gov (United States)

    Jang, Hyungshim; Reeve, Johnmarshall; Ryan, Richard M.; Kim, Ahyoung

    2009-01-01

    Recognizing recent criticisms concerning the cross-cultural generalizability of self-determination theory (SDT), the authors tested the SDT view that high school students in collectivistically oriented South Korea benefit from classroom experiences of autonomy support and psychological need satisfaction. In Study 1, experiences of autonomy,…

  18. Clean room for the production of cold kits: two year experience with the production of kits for 99mTc radiopharmaceuticals

    International Nuclear Information System (INIS)

    Muralidharan, Sheela H.; Nair, Preeti; Ghodke, Archana S.; Pillai, Thara; Sheri, Kumar Uma; Vanaja, R.; Mehra, Kiran S.; Sachdev, S.S.; Sivaprasad, N.

    2010-01-01

    A new clean room has been designed and constructed at Radiopharmaceuticals Programme, BRIT keeping in view the functional aspects for the production of 'cold' kits for the preparation of 99m Tc radiopharmaceuticals for supply to nuclear medicine centers and is in operation, since October, 2008. This clean room is the first clean room in the country designed exclusively for cold kit production. The clean room was validated and trial batches were produced and quality controlled prior to put it in regular production operation. The clean environment is maintained by separate AHU (air handling unit) located out side the clean room. A technical crew maintain the AHU unit and maintain record of parameters such as humidity, air flow, blower speed, chiller temperature etc. During a typical batch production not more than two persons are present in the formulation room. The formulated solution (filtered through 0.22μ membrane filter) is passed though a pass box between the formulation and dispensing area. The no. of people allowed in the dispensing area which is a critical area of class 100 is restricted to not more than four that too no person is allowed to be in between direct flow of HEPA filtered air and the dispensing table. The number of vials to be dispensed is arranged in trays and 1 ml of the formulated sterile solution is dispensed into each vial and the vials are transferred in to the lyophilization chamber. Sterile vials are introduced into class 100 area and the vials are removed after lyophilization though a pass box. After lyophilization vials are sealed with aluminum caps and stored at 2-10 deg C. Since the commissioning of the new clean room, about 120 batches of 10 different kit products were prepared and 1,20,000 kit vials were supplied to various hospitals for nuclear medicine investigation

  19. Productive diversification in natural resource abundant countries : limitations, policies and the experience of Argentina in the 2000s

    NARCIS (Netherlands)

    L.A. Serino (Leandro)

    2009-01-01

    textabstractThe debate on the pattern of specialization in natural resource abundant countries has re-emerged as demand for raw materials and food products from the rapidly growing East Asian countries, speculation in financial markets, and changes in production techniques augmented the

  20. Effect of Learning Achievement of the Eye of Productive Training, Prakerin Experience, and Interests in Student Readiness Entering the World of Work

    Directory of Open Access Journals (Sweden)

    Dita Nur Faizah

    2017-11-01

    Full Text Available This study is a quantitative research by using descriptive and ex-post facto. The purpose of this research is to know how: (1 the description of learning achievement, description of internship experience, description of working interest, and description of working readiness; (2 the effect of productive learning achievement, internship experience, and working interest partially on the readiness of work for the students of SMK Negeri 1 Kraksaan Probolinggo. Data collection techniques used are questionnaire and documentation method. The sampling technique used is proportional random sampling. The result of the analysis shows that: (1 student learning achievement of productive, student internship experience, students working interest, and readiness of student work is in good category; (2 there is a negative and not significant influence between learning achievement of productive education and training on job readiness; (3 there is a positive but insignificant influence between internship experience on job readiness; (4 there is a positive but not significant influence between the interest of work to the readiness of class XII business management students in SMK Negeri 1 Kraksaan Probolinggo.

  1. Jet A and low sulphur diesel production and blending experience in a synthetic crude-rich environment

    International Nuclear Information System (INIS)

    1997-01-01

    The Sunoco Sarnia Refinery has produced large volumes of high quality Jet A and Low Sulphur Diesel without major capital investment. They have done this by blending the synergy between hydrocracked and synthetic-based distillate stocks. The Sunoco Sarnia Refinery has two crude units, a Catalytic Cracker, a Hydrocracker and a Hydrogen unit, two reformers, Alkylation and BTX units. It also has the usual facilities such as gas plants, gasoline treater, and a naphtha pre-treater for former feed and an amine sulphur unit. Refinery distillate products, crudes used, components used for blending the distillate products, cost of the facilities and average production of each product were reviewed. A schematic of the Sarnia Refinery Distillate Production Facility was provided. 1 tab., 1 fig

  2. Does the Ecomark Label Promote Environmentally Improved Products in India and What Experiences Can Be Drawn from the Nordic Ecolabel?

    DEFF Research Database (Denmark)

    Thomsen, Jakob; McAloone, Tim C.

    2015-01-01

    to a different region of the world. Firstly we analyse, the ability of the Indian “Ecomark” label to promote environmentally improved products in India. The Ecomark scheme was launched in 1991, however the Ecomark label currently remains a nonstarter, with little awareness and no real consumer demand. India......Ecolabels are used to give consumers information about the environmental impact of products and thereby give an informed choice and an incentive to the consumer to choose the ecolabelled product. The environmental effectiveness of ecolabels ultimately relies on consumers’ willingness to pay extra...... for a product with a lower environmental impact than alternative products. Various ecolabels exist throughout the world, but the difference between the successful and the non-effective ecolabels is large. This paper compares a best practice example of an ecolabel with a less successful ecolabel – each belonging...

  3. The Evaluation of Efficiency of Production Management at Forestry Enterprise: Experience with Discriminantal and Applied Econometric Models

    Directory of Open Access Journals (Sweden)

    Pilko Andriy D.

    2017-07-01

    Full Text Available The publication is aimed at coverage of the results of a study on existing approaches to the setting and solving the task of evaluation and analysis of efficiency of management of production processes at forestry enterprises, as well as implementation and development (in line with the industry specificity of the previously proposed approach to evaluating, analyzing and forecasting the efficiency of management of the production process by means of development and application of the economic-mathematical modeling capabilities. A study on the efficiency of the production process management and the usage of enterprise’s basic production assets has been conducted with application of discriminantal and simultative econometric models. Further development of the proposed approach could provide an additional methodical basis for planning activities to improve the management of production at forestry enterprises.

  4. Experience utilizing a 3.7 MeV tandem cascade accelerator (TCA) for PET radioisotope production

    International Nuclear Information System (INIS)

    Welch, M.J.; Gaehle, G.; Dence, C.S.

    1994-01-01

    A 3.7 MeV TCA was installed at Washington University in the Spring of 1993 for evaluation as a PET isotope production accelerator. The accelerator was installed in a specially designed suite consisting of the accelerator room, a open-quotes hot labclose quotes and a open-quotes cold labclose quotes. The accelerator has been utilized routinely for PET isotope production since it's installation. Although the major radionuclide produced utilizing the TCA is oxygen-15, techniques for the production of fluorine-18 and nitrogen-13 have been developed. The novel techniques used to produce usable quantities of these latter two isotopes will be discussed

  5. Recent experiments towards production and diagnostics of nitrogen ion beam for medium-mass ion beam ICF

    Energy Technology Data Exchange (ETDEWEB)

    Kasuya, K [Tokyo Inst. of Tech., Yokohama (Japan). Dept. of Energy Sciences; Yasuike, K; Miyamoto, S [Osaka Univ. (Japan). Inst. of Laser Engineering; and others

    1997-12-31

    Three research teams are collaborating in the title topics. The first group presented proposals and preliminary results on (1) re-operation of cryogenic diode for nitrogen beam, (2) laser plasma production to supply ion source, (3) application of CCD camera element to advanced particle detector, (4) application of cryogenic technique to advanced material production method, and (5) reform of UV laser for future diode cleaning or plasma production. The joint 2nd and 3rd groups present (6) most recent results of time- and space-dependent particle beam diagnostics by an advanced arrayed pin-hole camera. (orig.). 5 figs., 6 refs.

  6. Experience from design, prototyping and production of a DC–DC conversion powering scheme for the CMS Phase-1 Pixel Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Feld, Lutz, E-mail: Lutz.Feld@cern.ch; Karpinski, Waclaw; Klein, Katja; Lipinski, Martin; Preuten, Marius; Rauch, Max; Schmitz, Stefan; Wlochal, Michael

    2017-02-11

    The CMS pixel detector will be replaced during the technical stop 2016/2017. To allow the new pixel detector to be powered with the legacy cable plant and power supplies, a novel powering scheme based on DC–DC conversion will be employed. After the successful conclusion of an extensive development and prototyping phase, mass production of 1800 DC–DC converters as well as motherboards and other power PCBs has now been completed. This contribution reviews the lessons learned from the development of the power system for the Phase-1 pixel detector, and summarizes the experience gained from the production phase.

  7. Adulteration of proprietary Chinese medicines and health products with undeclared drugs: experience of a tertiary toxicology laboratory in Hong Kong.

    Science.gov (United States)

    Ching, Chor Kwan; Chen, Sammy Pak Lam; Lee, Hencher Han Chih; Lam, Ying Hoo; Ng, Sau Wah; Chen, Mo Lung; Tang, Magdalene Huen Yin; Chan, Suzanne Suk San; Ng, Candy Wai Yan; Cheung, Jana Wing Lan; Chan, Tina Yee Ching; Lau, Nike Kwai Cheung; Chong, Yeow Kuan; Mak, Tony Wing Lai

    2018-01-01

    Proprietary Chinese medicines (pCMs) and health products, generally believed to be natural and safe, are gaining popularity worldwide. However, the safety of pCMs and health products has been severely compromised by the practice of adulteration. The current study aimed to examine the problem of adulteration of pCMs and health products in Hong Kong. The present study was conducted in a tertiary referral clinical toxicology laboratory in Hong Kong. All cases involving the use of pCMs or health products, which were subsequently confirmed to contain undeclared adulterants, from 2005 to 2015 were reviewed retrospectively. A total of 404 cases involving the use of 487 adulterated pCMs or health products with a total of 1234 adulterants were identified. The adulterants consisted of approved drugs, banned drugs, drug analogues and animal thyroid tissue. The six most common categories of adulterants detected were nonsteroidal anti-inflammatory drugs (17.7%), anorectics (15.3%), corticosteroids (13.8%), diuretics and laxatives (11.4%), oral antidiabetic agents (10.0%) and erectile dysfunction drugs (6.0%). Sibutramine was the most common adulterant (n = 155). The reported sources of these illicit products included over-the-counter drug stores, the internet and Chinese medicine practitioners. A significant proportion of patients (65.1%) had adverse effects attributable to these illicit products, including 14 severe and two fatal cases. Psychosis, iatrogenic Cushing syndrome and hypoglycaemia were the three most frequently encountered adverse effects. Adulteration of pCMs and health products with undeclared drugs poses severe health hazards. Public education and effective regulatory measures are essential to address the problem. © 2017 The British Pharmacological Society.

  8. [Traceability of labile blood products in Morocco: experience of the Ibn-Sina hospital of Rabat between 1999 and 2010].

    Science.gov (United States)

    Ouadghiri, S; Atouf, O; Brick, C; Benseffaj, N; Essakalli, M

    2012-02-01

    The blood transfusion and haemovigilance service of the Ibn-Sina hospital in Rabat (Morocco) was created 1997. This unit manages the pretransfusional tests, distribution of blood products, traceability and haemovigilance. The objective of this study was to analyze, over a period of 12years, the traceability of blood products delivered in our hospital and the measures used to improve feedback information. This is a retrospective study conducted between 1999 and 2010. Traceability rate was calculated from the feedback of traceability forms supplied with blood products (number of blood products noted on traceability forms on the total number of delivered product). To improve traceability rate, several actions were undertaken: one-time training, awareness campaigns and call phones asking for feedback information. Between 1999 and 2010, the service has delivered 173,858 blood products. The average rate of traceability during this period was 13.4 %. Traceability rate varies widely over time (5.2 % in 1999, 15.5 % in 2010) and shows a maximum value of 27.2 % in 2005. Feedback information is lower in emergency departments than in medical and surgical services. Feedback information about traceability in Ibn-Sina hospital remains very poor despite the measures used. Other actions, such as continuous education courses, low enforcement and informatisation should be considered. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

  9. Multiple production around 1000 TeV observed in the emulsion chamber experiments at Mt. Fuji and linkage experiments with air shower

    International Nuclear Information System (INIS)

    Torii, Syoji

    1980-01-01

    The multiple production around 1000 TeV is discussed in this paper by using the experimental data at Mt. Fuji and the results of the Monte Carlo simulation. Six events with the total energy more than 1000 TeV were observed in the emulsion chamber (EC) exposed for 600 m 2 year at Mt. Fuji. Various Monte Carlo calculations with the scaling model were performed. The relation between the transverse momentum and The Feynman scaling law is discussed. The frequency of the total gamma energy spectrum and the lateral distribution of the family were compared with the calculation. In the case that protons are dominant in primary cosmic ray, the multiplicity in the interaction increased according to 1/4 th power of energy. In the case of heavy nuclei, the experimental results can be reproduced by assuming the increase of cross-section, when the scaling holds. It is still hard to make definite conclusion on the break of scaling. Simultaneous observation of air family and air shower is proposed. (Kato, T.)

  10. The ALICE experiment: $\\rm D^{+}$-meson production in heavy-ion collisions and silicon low noise sensors characterization for the ITS Upgrade.

    CERN Document Server

    AUTHOR|(CDS)2084697; Bruna, Elena

    This thesis collects my work on two aspects of the ALICE experiment at the Large Hadron Collider: the measurement of $\\rm D^{+}$-meson production in Pb-Pb collisions at $\\sqrt{s_{\\rm {NN}}}= 2.76$ TeV and the characterization of silicon low noise sensors for the Inner Tracking System Upgrade. I worked within the INFN group of Torino that it is involved in the ALICE experiment both in the physics program related to the study of heavy-flavour production and in the project of the ITS Upgrade. ALICE is one of the main experiment of the LHC and it is the only one optimized to study ultra-relativistic heavy-ion collisions. The main goal is to study the properties of the Quark Gluon Plasma (QGP), a phase of matter where quarks and gluons are deconned. Heavy quarks are a powerful tool to study such properties because they can be created only in hard scattering processes at the initial stage of the collision and, subsequently, they interact with the QGP. The measurement of charmed meson production in Pb-P...

  11. Summary report of PQRI Workshop on Nanomaterial in Drug Products: current experience and management of potential risks.

    Science.gov (United States)

    Bartlett, Jeremy A; Brewster, Marcus; Brown, Paul; Cabral-Lilly, Donna; Cruz, Celia N; David, Raymond; Eickhoff, W Mark; Haubenreisser, Sabine; Jacobs, Abigail; Malinoski, Frank; Morefield, Elaine; Nalubola, Ritu; Prud'homme, Robert K; Sadrieh, Nakissa; Sayes, Christie M; Shahbazian, Hripsime; Subbarao, Nanda; Tamarkin, Lawrence; Tyner, Katherine; Uppoor, Rajendra; Whittaker-Caulk, Margaret; Zamboni, William

    2015-01-01

    At the Product Quality Research Institute (PQRI) Workshop held last January 14-15, 2014, participants from academia, industry, and governmental agencies involved in the development and regulation of nanomedicines discussed the current state of characterization, formulation development, manufacturing, and nonclinical safety evaluation of nanomaterial-containing drug products for human use. The workshop discussions identified areas where additional understanding of material attributes, absorption, biodistribution, cellular and tissue uptake, and disposition of nanosized particles would continue to inform their safe use in drug products. Analytical techniques and methods used for in vitro characterization and stability testing of formulations containing nanomaterials were discussed, along with their advantages and limitations. Areas where additional regulatory guidance and material characterization standards would help in the development and approval of nanomedicines were explored. Representatives from the US Food and Drug Administration (USFDA), Health Canada, and European Medicines Agency (EMA) presented information about the diversity of nanomaterials in approved and newly developed drug products. USFDA, Health Canada, and EMA regulators discussed the applicability of current regulatory policies in presentations and open discussion. Information contained in several of the recent EMA reflection papers was discussed in detail, along with their scope and intent to enhance scientific understanding about disposition, efficacy, and safety of nanomaterials introduced in vivo and regulatory requirements for testing and market authorization. Opportunities for interaction with regulatory agencies during the lifecycle of nanomedicines were also addressed at the meeting. This is a summary of the workshop presentations and discussions, including considerations for future regulatory guidance on drug products containing nanomaterials.

  12. Thin layer activation (TLA) experiment of piston ring F.J product by using nuclear facility proton beam 12.5 MeV

    International Nuclear Information System (INIS)

    Sudarmono; Silakhuddin

    2002-01-01

    The experiment of thin layer activation of piston ring F.J product, was done. The purpose of this experiment are to measure material wearing level by using concentration method. The experiment was carried out by activated piston ring proton beam with energy 12,5 MeV and beam current 1 μA for 30 minutes then was continued by wearing process. The measurement of the wear result activity was carried out by pouring the total of volume of lubricant oil for radioactivity measurement. Measurement of the activity level used the gamma spectroscopy. The minimum wearing duration that can detects a wear was 5 hours. The activity count was 1.230 pulse per 30 seconds which is in accordance with a wear in order of 8 mg of Fe material on 1 liter oil lubricant, this result is same with the result of T. Delvigne namely is less than 10 mgr

  13. Heavy water production by the method of ammonia rectification with heat pump. Experience of starting of industrial installation

    International Nuclear Information System (INIS)

    Rozen, A.M.

    1995-01-01

    Basic results of the start-up in 1955 of a facility for heavy water production by ammonia refining are presented to substantiate its economic profitability. The description of the facility is given, data on the materials corrosion resistance, efficiency of the operation of the trays and pumps are provided. It is shown that the mentioned method of heavy water production in terms of economic indices is similar to highly efficient methods, namely: refining of liquid hydrogen and water-hydrogen sulfide two-temperature isotopic exchange. 14 refs., 14 figs., 2 tabs

  14. Capacity Building in Southern Africa: Experiences and Reflections--Towards Joint Knowledge Production and Social Change in International Development Cooperation

    Science.gov (United States)

    Zeelen, Jacques; van der Linden, Josje

    2009-01-01

    The intent of capacity building in international development cooperation is to enable people to control their own development. Important premises are ownership, choice and self-esteem. The authors analyse the dynamics of the enabling process in practice, based on their own experiences working for several years in universities in developing…

  15. How do health information and sensory attributes influence consumer choice for dairy products? Evidence from a field experiment in Ethiopia

    NARCIS (Netherlands)

    Bekele, A.D.; Beuving, J.J.; Ruben, R.

    2017-01-01

    Purpose: The research aims to examine the effect of health information and sensory attributes on consumer’s propensity to upgrade and their willingness to pay for pasteurized milk in Ethiopia. Design/methodology/approach: We used a framed market experiment with 160 participants in 14 central

  16. How do health information and sensory attributes influence consumer choice for dairy products? Evidence from a field experiment in Ethiopia

    NARCIS (Netherlands)

    Bekele, Alemayehu Dekeba; Beuving, Joost; Ruben, Ruerd

    2017-01-01

    Purpose: The purpose of this paper is to examine the effect of health information and sensory attributes on consumer’s propensity to upgrade and their willingness to pay (WTP) for pasteurized milk in Ethiopia. Design/methodology/approach: The authors used a framed market experiment with 160

  17. Comparative Quantitative Assessments of Salivary Ion Activity Product for Hydroxyapatite and Buffering Capacity in Children with Different Caries Experience.

    Science.gov (United States)

    Anand, Siddharth; Masih, Updesh; Yeluri, Ramakrishna

    If a relation exists between salivary I PHA , buffer capacity and caries experience, then this relationship could be used as screening chair side test for caries risk assessment. One hundred ninety seven children aged 4 to 6 years were examined. Data was collected by interview and clinical examination. They were divided into low, moderate and high caries experience group of 20 children each. Two ml of each sample was used to measure the pH value with pH meter. Regarding the buffering capacity, freshly prepared hydrochloric acid (HCl) was titrated into saliva and pH was recorded. The collected saliva samples were sent to Laboratory for measurement of calcium and phosphorus. I PHA was calculated and the negative logarithms of I PHA were used to determine the enamel solubility. The correlation between salivary I PHA , buffering capacity and caries experience were evaluated. There was a significant relation between pH, log I PHA and dental caries experience, it could be considered as a predictor of dental caries. pH measurement after HCl titration in saliva could be used as chair side screening test for the assessment of caries risk.

  18. Financial Rewards Do Not Stimulate Co-Production: Evidence from Two Experiments : Fortcoming in Public Administration review

    NARCIS (Netherlands)

    W.H. Voorberg (William); S.R. Jilke (Sebastian); L.G. Tummers (Lars); V.J.J.M. Bekkers (Victor)

    2017-01-01

    textabstractWestern governments are increasingly trying to stimulate citizens to ‘co-produce’ public services, among others, by offering them financial incentives. However, there are competing views on whether financial incentives stimulate co-production. While some argue it increases citizens’

  19. Internal quality control of blood products: An experience from a tertiary care hospital blood bank from Southern Pakistan

    Directory of Open Access Journals (Sweden)

    Sadia Sultan

    2018-01-01

    CONCLUSION: The IQC of blood products at our blood bank is in overall compliance and met recommended international standards. Implementation of standard operating procedures, accomplishment of standard guidelines, proper documentation with regular audit, and staff competencies can improve the quality performance of the transfusion services.

  20. Results of out-of-pile experiments to investigate the possibilities of cooling a core melt with internal heat production

    International Nuclear Information System (INIS)

    Fieg, G.

    1976-01-01

    After serious hypothetical reactor accidents, melted core materials with internal heat production can occur in large quantities. A retention of these molten core masses within the containment must be ensured. The knowledge of the heat transport from volume-heated layers is necessary to clarify this matter. (orig./LH) [de