Reactivity feedbacks of a material test research reactor fueled with various low enriched uranium dispersion fuels

International Nuclear Information System (INIS)

Muhammad, Farhan; Majid, Asad

2009-01-01

The reactivity feedbacks of a material test research reactor using various low enriched uranium fuels, having same uranium density were calculated. For this purpose, the original aluminide fuel (UAl x -Al) containing 4.40 gU/cm 3 of an MTR was replaced with silicide (U 3 Si-Al and U 3 Si 2 -Al) and oxide (U 3 O 8 -Al) dispersion fuels having the same uranium density as of the original fuel. Calculations were carried out to find the fuel temperature reactivity feedback, moderator temperature reactivity feedback, moderator density reactivity feedback and moderator void reactivity feedback. Nuclear reactor analysis codes including WIMS-D4 and CITATION were employed to carry out these calculations. It was observed that the magnitudes all the respective reactivity feedbacks from 38 deg. C to 50 deg. C and 100 deg. C, at the beginning of life, of all the fuels were very close to each other. The fuel temperature reactivity feedback of the U 3 O 8 -Al was about 2% more than the original UAl x -Al fuel. The magnitudes of the moderator temperature, moderator density and moderator void reactivity feedbacks of all the fuels, showed very minor variations from the original aluminide fuel.

Reactivity feedback coefficients Pakistan research reactor-1 using PRIDE code

Energy Technology Data Exchange (ETDEWEB)

Mansoor, Ali; Ahmed, Siraj-ul-Islam; Khan, Rustam [Pakistan Institute of Engineering and Applied Sciences, Islamabad (Pakistan). Dept. of Nuclear Engineering; Inam-ul-Haq [Comsats Institute of Information Technology, Islamabad (Pakistan). Dept. of Physics

2017-05-15

Results of the analyses performed for fuel, moderator and void's temperature feedback reactivity coefficients for the first high power core configuration of Pakistan Research Reactor - 1 (PARR-1) are summarized. For this purpose, a validated three dimensional model of PARR-1 core was developed and confirmed against the reference results for reactivity calculations. The ''Program for Reactor In-Core Analysis using Diffusion Equation'' (PRIDE) code was used for development of global (3-dimensional) model in conjunction with WIMSD4 for lattice cell modeling. Values for isothermal fuel, moderator and void's temperature feedback reactivity coefficients have been calculated. Additionally, flux profiles for the five energy groups were also generated.

A random-parametric reactor model with direct feedback and non-white noise

International Nuclear Information System (INIS)

Sako, O.; Taniguchi, A.; Kuroda, Y.

1982-01-01

The effects of multiplicative direct power feedback and non-white reactivity noise on the fluctuations of the neutron density are studied, based on the master equation using the cumulant expansion and the system-size expansion. The results obtained are the following: non-whiteness of reactivity noise reduces the variance of neutron density, as well as the level of the power spectral density. The nonlinear effect of power feedback gives rise to at least a pair of corner frequencies, in contrast to the single corner frequency in linearized case. (author)

Techniques for computing reactivity changes caused by fuel axial expansion in LMR's

International Nuclear Information System (INIS)

Khalil, H.

1988-01-01

An evaluation is made of the accuracy of methods used to compute reactivity changes caused by axial fuel relocation in fast reactors. Results are presented to demonstrate the validity of assumptions commonly made such as linearity of reactivity with fuel elongation, additivity of local reactivity contributions, and the adequacy of standard perturbation techniques. Accurate prediction of the reactivity loss caused by axial swelling of metallic fuel is shown to require proper representation of the burnup dependence of the expansion reactivity. Some accuracy limitations in the methods used in transient analyses, which are based on the use of fuel worth tables, are identified, and efficient ways to improve accuracy are described. Implementation of these corrections produced expansion reactivity estimates within 5% of higher-order method for a metal-fueled FFTF core representation. 18 refs., 3 figs., 3 tabs

Neuroticism and responsiveness to error feedback: adaptive self-regulation versus affective reactivity.

Science.gov (United States)

Robinson, Michael D; Moeller, Sara K; Fetterman, Adam K

2010-10-01

Responsiveness to negative feedback has been seen as functional by those who emphasize the value of reflecting on such feedback in self-regulating problematic behaviors. On the other hand, the very same responsiveness has been viewed as dysfunctional by its link to punishment sensitivity and reactivity. The present 4 studies, involving 203 undergraduate participants, sought to reconcile such discrepant views in the context of the trait of neuroticism. In cognitive tasks, individuals were given error feedback when they made mistakes. It was found that greater tendencies to slow down following error feedback were associated with higher levels of accuracy at low levels of neuroticism but lower levels of accuracy at high levels of neuroticism. Individual differences in neuroticism thus appear crucial in understanding whether behavioral alterations following negative feedback reflect proactive versus reactive mechanisms and processes. Implications for understanding the processing basis of neuroticism and adaptive self-regulation are discussed.

Reactivity feedback coefficients of a low enriched uranium fuelled material test research reactor at end-of-life

International Nuclear Information System (INIS)

Muhammad, Farhan

2011-01-01

Highlights: → The isotopic concentration in the fuel changes as soon as it starts its operation. → The neutronic properties of a reactor also change with fuel burnup. → The reactivity feedbacks at end-of-life of a material test reactor fuelled with low enriched uranium fuel are calculated. → Codes used include WIMS-D4 and CITATION. - Abstract: The reactivity feedback coefficients at end-of-life of a material test reactor fuelled with low enriched uranium fuel were calculated. The reactor used for the study was the IAEA's 10 MW benchmark reactor. Simulations were carried out to calculate the different reactivity feedback coefficients including Doppler feedback coefficient, reactivity coefficient for change of water temperature and reactivity coefficient for change of water density. Nuclear reactor analysis codes including WIMS-D4 and CITATION were employed to carry out these calculations. It was observed that the magnitude of all the reactivity feedback coefficients increased at end of life of the reactor by almost 2-5%.

Application of a Virtual Reactivity Feedback Control Loop in Non-Nuclear Testing of a Fast Spectrum Reactor

International Nuclear Information System (INIS)

Bragg-Sitton, Shannon M.; Forsbacka, Matthew

2004-01-01

For a compact, fast-spectrum reactor, reactivity feedback is dominated by core deformation at elevated temperature. Given the use of accurate deformation measurement techniques, it is possible to simulate nuclear feedback in non-nuclear electrically heated reactor tests. Implementation of simulated reactivity feedback in response to measured deflection is being tested at the Nasa Marshall Space Flight Center Early Flight Fission Test Facility (EFF-TF). During tests of the SAFE-100 reactor prototype, core deflection was monitored using a high resolution camera. 'Virtual' reactivity feedback was accomplished by applying the results of Monte Carlo calculations (MCNPX) to core deflection measurements; the computational analysis was used to establish the reactivity worth of various core deformations. The power delivered to the SAFE-100 prototype was then adjusted accordingly via kinetics calculations. The work presented in this paper will demonstrate virtual reactivity feedback as core power was increased from 1 kWt to 10 kWt, held approximately constant at 10 kWt, and then allowed to decrease based on the negative thermal reactivity coefficient. (authors)

Electrocortical reactivity to social feedback in youth: A pilot study of the Island Getaway task

Directory of Open Access Journals (Sweden)

Autumn Kujawa

2014-10-01

Full Text Available Peer relationships become a major concern in adolescence, yet event-related potential (ERP measures of reactivity to social feedback in adolescence are limited. In this pilot study, we tested a novel task to elicit reactivity to social feedback in youth. Participants (10–15 years old; 57.9% male; N = 19 played a game that involved exchanging personal information with peers, voting to remove players from the game, and receiving rejection and acceptance feedback from peers. Results indicated that participants modified their voting behavior in response to peer feedback, and rejection feedback was associated with a negativity in the ERP wave compared to acceptance (i.e., the feedback negativity, FN. The FN predicted behavioral patterns, such that participants who showed greater neural reactivity to social feedback were less likely to reject co-players. Preliminary analyses suggest that the task may be a useful measure of individual differences: adolescents higher in social anxiety symptoms were less likely to reject peers and showed an enhanced FN to rejection vs. acceptance feedback, and higher depressive symptoms predicted an increased FN to rejection specifically. Results suggest that the FN elicited by social feedback may be a useful, economical neural measure of social processing across development and in clinical research.

Sensitivity of reactivity feedback due to core bowing in a metallic-fueled core

International Nuclear Information System (INIS)

Nakagawa, Masatoshi; Kawashima, Masatoshi; Endo, Hiroshi; Nishimura, Tomohiro

1991-01-01

A sensitivity study has been carried out on negative reactivity feedback caused by core bowing to assess the potential effectiveness of FBR passive safety features in regard to withstanding an anticipated transient without scram (ATWS). In the present study, an analysis has been carried to obtain the best material and geometrical conditions concerning the core restraint system out for several power to flow rates (P/F), up to 2.0 for a 300 MWe metallic-fueled core. From this study, it was clarified that the pad stiffness at an above core loading pads (ACLP) needs to be large enough to ensure negative reactivity feedback against ATWS. It was also clarified that there is an upper limit for the clearances between ducts at ACLP. A new concept, in regard to increasing the absolute value for negative reactivity feedback due to core bowing at ATWS, is proposed and discussed. (author)

Reactivity-induced time-dependencies of EBR-II linear and non-linear feedbacks

International Nuclear Information System (INIS)

Grimm, K.N.; Meneghetti, D.

1988-01-01

Time-dependent linear feedback reactivities are calculated for stereotypical subassemblies in the EBR-II reactor. These quantities are calculated from nodal reactivities obtained from a kinetic code analysis of an experiment in which the change in power resulted from the dropping of a control rod. Shown with these linear reactivities are the reactivity associated with the control-rod shaft contraction and also time-dependent non-linear (mainly bowing) component deduced from the inverse kinetics of the experimentally measured fission power and the calculated linear reactivities. (author)

On a closed form solution of the point kinetics equations with reactivity feedback of temperature

International Nuclear Information System (INIS)

Silva, Jeronimo J.A.; Vilhena, Marco T.M.B.; Petersen, Claudio Z.; Bodmann, Bardo E.J.; Alvim, Antonio C.M.

2011-01-01

An analytical solution of the point kinetics equations to calculate reactivity as a function of time by the Decomposition method has recently appeared in the literature. In this paper, we go one step forward, by considering the neutron point kinetics equations together with temperature feedback effects. To accomplish that, we extended the point kinetics by a temperature perturbation, obtaining a second order nonlinear ordinary differential equation. This equation is then solved by the Decomposition Method, that is, by expanding the neutron density in a series and the nonlinear terms into Adomian Polynomials. Substituting these expansions into the nonlinear ordinary equation, we construct a recursive set of linear problems that can be solved by the methodology previously mentioned for the point kinetics equation. We also report on numerical simulations and comparisons against literature results. (author)

Development of a Two-dimensional Thermohydraulic Hot Pool Model and ITS Effects on Reactivity Feedback during a UTOP in Liquid Metal Reactors

International Nuclear Information System (INIS)

Lee, Yong Bum; Jeong, Hae Yong; Cho, Chung Ho; Kwon, Young Min; Ha, Kwi Seok; Chang, Won Pyo; Suk, Soo Dong; Hahn, Do Hee

2009-01-01

The existence of a large sodium pool in the KALIMER, a pool-type LMR developed by the Korea Atomic Energy Research Institute, plays an important role in reactor safety and operability because it determines the grace time for operators to cope with an abnormal event and to terminate a transient before reactor enters into an accident condition. A two-dimensional hot pool model has been developed and implemented in the SSC-K code, and has been successfully applied for the assessment of safety issues in the conceptual design of KALIMER and for the analysis of anticipated system transients. The other important models of the SSC-K code include a three-dimensional core thermal-hydraulic model, a reactivity model, a passive decay heat removal system model, and an intermediate heat transport system and steam generation system model. The capability of the developed two-dimensional hot pool model was evaluated with a comparison of the temperature distribution calculated with the CFX code. The predicted hot pool coolant temperature distributions obtained with the two-dimensional hot pool model agreed well with those predicted with the CFX code. Variations in the temperature distribution of the hot pool affect the reactivity feedback due to an expansion of the control rod drive line (CRDL) immersed in the pool. The existing CRDL reactivity model of the SSC-K code has been modified based on the detailed hot pool temperature distribution obtained with the two-dimensional pool model. An analysis of an unprotected transient over power with the modified reactivity model showed an improved negative reactivity feedback effect

Climate warming feedback from mountain birch forest expansion: reduced albedo dominates carbon uptake.

Science.gov (United States)

de Wit, Heleen A; Bryn, Anders; Hofgaard, Annika; Karstensen, Jonas; Kvalevåg, Maria M; Peters, Glen P

2014-07-01

Expanding high-elevation and high-latitude forest has contrasting climate feedbacks through carbon sequestration (cooling) and reduced surface reflectance (warming), which are yet poorly quantified. Here, we present an empirically based projection of mountain birch forest expansion in south-central Norway under climate change and absence of land use. Climate effects of carbon sequestration and albedo change are compared using four emission metrics. Forest expansion was modeled for a projected 2.6 °C increase in summer temperature in 2100, with associated reduced snow cover. We find that the current (year 2000) forest line of the region is circa 100 m lower than its climatic potential due to land-use history. In the future scenarios, forest cover increased from 12% to 27% between 2000 and 2100, resulting in a 59% increase in biomass carbon storage and an albedo change from 0.46 to 0.30. Forest expansion in 2100 was behind its climatic potential, forest migration rates being the primary limiting factor. In 2100, the warming caused by lower albedo from expanding forest was 10 to 17 times stronger than the cooling effect from carbon sequestration for all emission metrics considered. Reduced snow cover further exacerbated the net warming feedback. The warming effect is considerably stronger than previously reported for boreal forest cover, because of the typically low biomass density in mountain forests and the large changes in albedo of snow-covered tundra areas. The positive climate feedback of high-latitude and high-elevation expanding forests with seasonal snow cover exceeds those of afforestation at lower elevation, and calls for further attention of both modelers and empiricists. The inclusion and upscaling of these climate feedbacks from mountain forests into global models is warranted to assess the potential global impacts. © 2013 John Wiley & Sons Ltd.

Inherent safety that the reactivity effect of core bending in fast reactors brings about

International Nuclear Information System (INIS)

Nakagawa, Masatoshi; Yagawa, Genki.

1994-01-01

FBRs have the merit on safety by low operation pressure and the large heat capacity of coolant, in addition, due to the core temperature rise at the time of accidents and the thermal expansion of core structures, the negative feedback of reactivity can be expected. Recently, attention has been paid to the negative feedback of reactivity due to core bending. It can be expected also in the core of limited free bow type. Bending is caused by the difference of thermal expansion on six surfaces of hexagonal wrapper tubes. The bending changes core reactivity and exerts effects to fuel exchange force and operation, insertion of control rods and the structural soundness of fuel assemblies. for the purpose of limiting the effect that core bending exerts to core characteristics to allowable range, core constraint mechanism is installed. The behavior of core bending at the time of anticipated transient without scram is explained. The example of the analysis of PRISM reactor is shown. The experiment that confirmed the negative feedback of reactivity due to core bending under the condition of ULOF was that at the fast flux test facility. (K.I.)

Nolinear stability analysis of nuclear reactors : expansion methods for stability domains

International Nuclear Information System (INIS)

Yang, Chae Yong

1992-02-01

Two constructive methods for estimating asymptotic stability domains of nonlinear reactor models are developed in this study: an improved Chang and Thorp's method based on expansion of a Lyapunov function and a new method based on expansion of any positive definite function. The methods are established on the concept of stability definitions of Lyapunov itself. The first method provides a sequence of stability regions that eventually approaches the exact stability domain, but requires many expansions in order to obtain the entire stability region because the starting Lyapunov function usually corresponds to a small stability region and because most dynamic systems are stiff. The second method (new method) requires only a positive definite function and thus it is easy to come up with a starting region. From a large starting region, the entire stability region is estimated effectively after sufficient iterations. It is particularly useful for stiff systems. The methods are applied to several nonlinear reactor models known in the literature: one-temperature feedback model, two-temperature feedback model, and xenon dynamics model, and the results are compared. A reactor feedback model for a pressurized water reactor (PWR) considering fuel and moderator temperature effects is developed and the nonlinear stability regions are estimated for the various values of design parameters by using the new method. The steady-state properties of the nonlinear reactor system are analyzed via bifurcation theory. The analysis of nonlinear phenomena is carried out for the various forms of reactivity feedback coefficients that are both temperature- (or power-) independent and dependent. If one of two temperature coefficients is positive, unstable limit cycles or multiplicity of the steady-state solutions appear when the other temperature coefficient exceeds a certain critical value. As an example, even though the fuel temperature coefficient is negative, if the moderator temperature

Alteration of alkali reactive aggregates autoclaved in different alkali solutions and application to alkali-aggregate reaction in concrete (II) expansion and microstructure of concrete microbar

International Nuclear Information System (INIS)

Lu Duyou; Mei Laibao; Xu Zhongzi; Tang Mingshu; Mo Xiangyin; Fournier, Benoit

2006-01-01

The effect of the type of alkalis on the expansion behavior of concrete microbars containing typical aggregate with alkali-silica reactivity and alkali-carbonate reactivity was studied. The results verified that: (1) at the same molar concentration, sodium has the strongest contribution to expansion due to both ASR and ACR, followed by potassium and lithium; (2) sufficient LiOH can completely suppress expansion due to ASR whereas it can induce expansion due to ACR. It is possible to use the duplex effect of LiOH on ASR and ACR to clarify the ACR contribution when ASR and ACR may coexist. It has been shown that a small amount of dolomite in the fine-grained siliceous Spratt limestone, which has always been used as a reference aggregate for high alkali-silica reactivity, might dedolomitize in alkaline environment and contribute to the expansion. That is to say, Spratt limestone may exhibit both alkali-silica and alkali-carbonate reactivity, although alkali-silica reactivity is predominant. Microstructural study suggested that the mechanism in which lithium controls ASR expansion is mainly due to the favorable formation of lithium-containing less-expansive product around aggregate particles and the protection of the reactive aggregate from further attack by alkalis by the lithium-containing product layer

Reactivity feedback components of a homogeneous U10Zr-fueled 900 MWt LMR

International Nuclear Information System (INIS)

Meneghetti, D.; Kucera, D.A.

1988-01-01

The linear and Doppler feedback components of the regional contributions of the power-reactivity-decrement (PRD) and of the temperature coefficient of reactivity for a 900 MWt homogeneous U10Zr-fueled sodium-cooled reactor are calculated. The PRD components are separated into power dependent and power-to-flow dependent parts. The values of PRD and temperature coefficient components are compared with corresponding quantities calculated for the Experimental Breeder Reactor II. The implications of these comparisons upon inherent safety characteristics of metal-fueled sodium-cooled reactors are discussed

Spatial neutronics modelling to evaluate the temperature reactivity feedbacks in a lead-cooled fast reactor - 15288

International Nuclear Information System (INIS)

Lorenzi, S.; Cammi, A.; Luzzi, L.

2015-01-01

The qualitative and quantitative assessment of the thermal reactivity feedbacks occurring in a nuclear reactor is a crucial issue for the time-dependent evolution of the system and, in turn, it has a great impact on the development and validation of advanced control techniques. In the present work, in order to overcome the limitations of the classic Point Kinetics adopted in the control simulators, a spatial neutronics model, representing the neutron flux as sum of a spatial basis weighted by time-dependent coefficients, has been considered. The reference reactor is ALFRED, the European demonstrator of the Lead-cooled Fast Reactor technology. Average cross-sections for each fuel assembly, calculated by means of a Monte Carlo code, have been used to solve the partial differential equations of the neutron diffusion, exploiting the capabilities of the COMSOL software. Once obtained the spatial functions, the set of equations for studying the reactivity effects has been implemented in the MATLAB environment. Among the several temperature reactivity feedbacks, specific attention has been paid to the Doppler effect in the fuel and to the lead density effect. Several spatial bases have been calculated and their capability of representing the reactivity variation have been assessed. (authors)

Benchmark on traveling wave fast reactor with negative reactivity feedback obtained with MCNPX code

International Nuclear Information System (INIS)

Gann, V.V.; Gann, A.V.

2012-01-01

This paper presents results of computer simulations of traveling wave fast reactor with negative reactivity feedback. The results were obtained using MCNPX code combined with CINDER90 subroutine for depletion calculations. We considered 1-D model of TWR containing 4 m long core made of mixture of 66 at. % 238 U and 34 at. % 10 B. Ignitor made of 235 U was located in the center of the core. Boron was included as imitator of structural in-core materials and coolant. Negative reactivity feedback was adjusted to reactor power of 500 MW. In this case two burning waves originated from the igniter and travel to the ends of the core during the following 40 years; coefficient of utilization of 238 U reached 80 %. Distribution of specific power in traveling wave, isotope concentration of fission products and actinides, neutron flux, fast neutron spectrum, specific activity were calculated. Data of the computer simulation is in qualitative agreement with theoretical results obtained in slow burning wave approximation

Combination of AC Transmission Expansion Planning and Reactive Power Planning in the restructured power system

International Nuclear Information System (INIS)

Hooshmand, Rahmat-Allah; Hemmati, Reza; Parastegari, Moein

2012-01-01

Highlights: ► To overcome the disadvantages of DC model in Transmission Expansion Planning, AC model should be used. ► The Transmission Expansion Planning associated with Reactive Power Planning results in fewer new transmission lines. ► Electricity market concepts should be considered in Transmission Expansion Planning problem. ► Reliability aspects should be considered in Transmission Expansion Planning problem. ► Particle Swarm Optimization is a suitable optimization method to solve Transmission Expansion Planning problem. - Abstract: Transmission Expansion Planning (TEP) is an important issue in power system studies. It involves decisions on location and number of new transmission lines. Before deregulation of the power system, the goal of TEP problem was investment cost minimization. But in the restructured power system, nodal prices, congestion management, congestion surplus and so on, have been considered too. In this paper, an AC model of TEP problem (AC-TEP) associated with Reactive Power Planning (RPP) is presented. The goals of the proposed planning problem are to minimize investment cost and maximize social benefit at the same time. In the proposed planning problem, in order to improve the reliability of the system the Expected Energy Not Supplied (EENS) index of the system is limited by a constraint. For this purpose, Monte Carlo simulation method is used to determine the EENS. Particle Swarm Optimization (PSO) method is used to solve the proposed planning problem which is a nonlinear mixed integer optimization problem. Simulation results on Garver and RTS systems verify the effectiveness of the proposed planning problem for reduction of the total investment cost, EENS index and also increasing social welfare of the system.

Track 5: safety in engineering, construction, operations, and maintenance. Reactor physics design, validation, and operating experience. 5. A Negative Reactivity Feedback Device for Actinide Burner Cores

International Nuclear Information System (INIS)

Driscoll, M.J.; Hejzlar, P.

2001-01-01

Lead-bismuth eutectic (LBE) cooled reactors are of considerable interest because they may be useful for destruction of actinides in a cost-effective manner, particularly cores fueled predominantly with minor actinides, which gain reactivity with burnup. However, they also pose several design challenges: 1. a small (and perhaps even slightly positive) Doppler feedback; 2. small effective delayed neutron yield; 3. a small negative feedback from axial fuel expansion; 4. positive coolant void and temperature coefficients for conventional designs. This has motivated a search for palliative measures, leading to conceptualization of the reactivity feedback device (RFD). The RFD consists of an in-core flask containing helium gas, tungsten wool, and a small reservoir of LBE that communicates with vertical tubes housing neutron absorber floats. The upper part of these guide tubes contains helium gas that is vented into a separate, cooler ex-core helium gas plenum. The principle of operation is as follows: 1. The tungsten wool, hence the helium gas in the in-core plenum, is heated by gammas and loses heat to the walls by convection and conduction (radiation is feeble for monatomic gases and, in any event, intercepted by the tungsten wool). An energy balance determines the gas temperature, hence, pressure, which is 10 atm here. The energy loss rate can be adjusted by using xenon or a gas mixture in place of helium. The tungsten wool mass, which is 1 vol% wool here, can also be increased to increase gamma heating and further retard convection; alternatively, a Dewar flask could be used in place of the additional wool. 2. An increase in core power causes a virtually instantaneous increase in gamma flux, hence, gas heatup: The thermal time constant of the tungsten filaments and their surrounding gas film is ∼40 μs. 3. The increased gas temperature is associated with an increased gas pressure, which forces more liquid metal into the float guide tubes: LBE will rise ∼100 cm

Impacts of reactivity feedback uncertainties on inherent shutdown in innovative designs

International Nuclear Information System (INIS)

Mueller, C.J.

1986-01-01

The concept of inherent shutdown is emphasized in the approach to the design of innovative, small pool-type liquid-metal reactors (LMRs). This paper reports an evaluation of reactivity feedback uncertainties used in the analyses of anticipated transients without scram for innovative LMRs, and the associated impacts on safety margins and inherent shutdown success probabilities on unprotected loss-of-flow (LOF) events. It then assesses the ultimate importance of these uncertainties on LOF and transient overpower events in evolving metal and oxide innovative designs

Impacts of reactivity feedback uncertainties on inherent shutdown in innovative designs

International Nuclear Information System (INIS)

Mueller, C.J.

1986-01-01

The concept of ''inherent shutdown'' is emphasized in the approach to the design of innovative, small pool-type liquid metal reactors (LMRs). This paper reports an evaluation of reactivity feedback uncertainties used in the analyses of anticipated transients without scram (ATWS) for innovative LMRs, and the associated impacts on safety margins and inherent shutdown success probabilities on unprotected loss-of-flow (LOF) events. It then assesses the ultimate importance of these uncertainties on LOF and transient overpower (TOP) events in evolving metal and oxide innovative designs

Reactivity feedback coefficients of a material test research reactor fueled with high-density U{sub 3}Si{sub 2} dispersion fuels

Energy Technology Data Exchange (ETDEWEB)

Muhammad, Farhan [Department of Nuclear Engineering, Pakistan Institute of Engineering and Applied Sciences, Nilore, Islamabad 45650 (Pakistan)], E-mail: farhan73@hotmail.com; Majid, Asad [Department of Nuclear Engineering, Pakistan Institute of Engineering and Applied Sciences, Nilore, Islamabad 45650 (Pakistan)

2008-10-15

The reactivity feedback coefficients of a material test research reactor fueled with high-density U{sub 3}Si{sub 2} dispersion fuels were calculated. For this purpose, the low-density LEU fuel of an MTR was replaced with high-density U{sub 3}Si{sub 2} LEU fuels currently being developed under the RERTR program. Calculations were carried out to find the fuel temperature reactivity coefficient, moderator temperature reactivity coefficient and moderator density reactivity coefficient. Nuclear reactor analysis codes including WIMS-D4 and CITATION were employed to carry out these calculations. It is observed that the average values of fuel temperature reactivity feedback coefficient, moderator temperature reactivity coefficient and moderator density reactivity coefficient from 20 deg. C to 100 deg. C, at the beginning of life, followed the relationships (in units of {delta}k/k x 10{sup -5} K{sup -1}) -2.116 - 0.118 {rho}{sub U}, 0.713 - 37.309/{rho}{sub U} and -12.765 - 34.309/{rho}{sub U}, respectively for 4.0 {<=} {rho}{sub U} (g/cm{sup 3}) {<=} 6.0.

Estimation of power feedback parameters of the IBR-2M reactor by square wave reactivity

International Nuclear Information System (INIS)

Pepelyshev, Yu.N.; Popov, A.K.; Sumkhuu, D.

2016-01-01

Parameters of the IBR-2M reactor power feedback (PFB) are estimated based on the analysis of power transients caused by deliberate square wave reactivity when the pulsed reactor operates in the self-regulation mode. The PFB of the IBR-2M is described by three linear first-order differential equations. Two components of the PFB are responsible for the negative feedback and one, for the positive. The overall feedback is negative, i.e., it has a stabilizing effect for the operation of the reactor. The slowest negative component of the PFB is probably caused by heating of the fuel. Periodically repeated in the process of exploitation, estimation of the PFB parameters is one of the methods to ensure safety operation of the reactor. [ru

Inadvertent pump start with gas expansion modules

International Nuclear Information System (INIS)

Campbell, L.R.; Harris, R.A.; Heard, F.J.; Dautel, W.A.

1992-01-01

Previous testing demonstrated the effectiveness of gas expansion modules (GEMs) in mitigating the consequences of a loss-of-flow-without-scram transient in Fast Flux Test Facility (FFTF)-sized sodium cooled cores. As a result, GEMs have been included in the advance liquid-metal reactor (PRISM) design project sponsored by the US Department of Energy. The PRISM design is under review at the US Nuclear Regulatory Commission for licensability. In the unlikely event that the reactor does not scram during a loss of low, the GEMs quickly insert sufficient negative reactivity to limit fuel and cladding temperatures to acceptable values. This is the positive benefit of the GEMs; however, the reverse situation must be considered. A primary pump could be inadvertently started from near-critical conditions resulting in a positive reactivity insertion and a power transient. One mitigating aspect of this event is that as the reactivity associated with the GEMs is inserted, the increasing flow increases core cooling. A test was conducted in the FFTF to demonstrate that the GEM and feedback reactivity are well predicted following pump start, and the reactivity transient is benign

Experiments with positive, negative and topical relevance feedback

NARCIS (Netherlands)

Kaptein, R.; Kamps, J.; Li, R.; Hiemstra, D.

2008-01-01

This document contains a description of experiments for the 2008 Relevance Feedback track. We experiment with different amounts of feedback, including negative relevance feedback. Feedback is implemented using massive weighted query expansion. Parsimonious query expansion using Dirichlet smoothing

Transient feedback from fuel motion in metal IFR [Integral Fast Reactor] fuel

International Nuclear Information System (INIS)

Rhodes, E.A.; Stanford, G.S.; Regis, J.P.; Bauer, T.H.; Dickerman, C.E.

1990-01-01

Results from hodoscope data analyses are presented for TREAT transient-overpower tests M5 through M7 with emphasis on transient feedback mechanisms, including prefailure expansion at the tops of the fuel pins, subsequent dispersive axial fuel motion, and losses in relative worth of the fuel pins during the tests. Tests M5 and M6 were the first TOP tests of margin to cladding branch and prefailure elongation of D9-clad ternary (U-Pu-Zr) IFR-type fuel. Test M7 extended these results to high-burnup fuel and also initiated transient testing of HT9-clad binary (U-Zr) FFTF-driver fuel. Results show significant prefailure negative reactivity feedback and strongly negative feedback from fuel driven to failure. 4 refs., 6 figs

Theoretical comparison of performance using transfer functions for reactivity meters based on inverse kinetic method and simple feedback method

International Nuclear Information System (INIS)

Shimazu, Yoichiro; Tashiro, Shoichi; Tojo, Masayuki

2017-01-01

The performance of two digital reactivity meters, one based on the conventional inverse kinetic method and the other one based on simple feedback theory, are compared analytically using their respective transfer functions. The latter one is proposed by one of the authors. It has been shown that the performance of the two reactivity meters become almost identical when proper system parameters are selected for each reactivity meter. A new correlation between the system parameters of the two reactivity meters is found. With this correlation, filter designers can easily determine the system parameters for the respective reactivity meters to obtain identical performance. (author)

Use of thermal time constant concept in the analysis of reactivity induced accidents with feedback

International Nuclear Information System (INIS)

Narain, R.

1981-01-01

A simple heat transfer model based on the thermal time constant concept which leads to significant reduction in fuel temperature computing time and gives a physical insight of the phenomena is presented. The fuel temperatures can be used to estimate the reactivity feedback using the measured or calculated Doppler coefficients. (E.G.) [pt

Enhanced thermal expansion control rod drive lines for improving passive safety of fast reactors

International Nuclear Information System (INIS)

Edelmann, M.; Baumann, W.; Kuechle, M.; Kussmaul, G.; Vaeth, W.; Bertram, A.

1992-01-01

The paper presents a device for increasing the thermal expansion effect of control rod drive lines on negative reactivity feedback in fast reactors. The enhanced thermal expansion of this device can be utilized for both passive rod drop and forced insertion of absorbers in unprotected transients, e.g. ULOF. In this way the reactor is automatically brought into a permanently subcritical state and temperatures are kept well below the boiling point of the coolant. A prototype of such a device called ATHENa (German: Shut-down by THermal Expansion of Na) is presently under construction and will be tested. The paper presents the principle, design features and thermal properties of ATHENs as well as results of reactor dynamics calculations of ULOF's for EFR with enhanced thermal expansion control rod drive lines. (author)

The impact of positive, negative and topical relevance feedback

NARCIS (Netherlands)

Kaptein, Rianne; Kamps, Jaap; Hiemstra, Djoerd

2008-01-01

This document contains a description of experiments for the 2008 Relevance Feedback track. We experiment with different amounts of feedback, including negative relevance feedback. Feedback is implemented using massive weighted query expansion. Parsimonious query expansion using only relevant

AIREK-MOD, Time Dependent Reactor Kinetics with Feedback Differential Equation

International Nuclear Information System (INIS)

Tamagnini, C.

1984-01-01

1 - Nature of physical problem solved: Solves the reactor kinetic equations with respect to time. A standard form for the reactivity behaviour has been introduced in which the reactivity is given by the sum of a polynomial, sine, cosine and exponential expansion. Tabular form is also included. The presence of feedback differential equations in which the dependence on variables different from the considered one is considered enables many heat-exchange problems to be dealt with. 2 - Method of solution: The method employed for the solution of the differential equations is the one developed by E.R. Cohen (Geneva Conference, 1958). 3 - Restrictions on the complexity of the problem: The maximum number of differential equations that can be solved simultaneously is 50. Within this limitation there may be n delayed neutron groups (n less than or equal to 25), on m other linear feedback equations (n+m less than or equal to 49). CDC 1604 version was offered by EIR (Institut Federal de Recherches en matiere de reacteurs, Switzerland)

Thermoelastic expansion in prompt-critical neutron pulse idealized in a fissile metallic sphere

International Nuclear Information System (INIS)

Barroso, D.E.G.; Ribeiro, S.G.

1985-01-01

Prompt critical pulses in solid and homogeneous spheres of enriched uranium (93%) and metallic plutonium are studied. The feedback mechanism of the negative inserted reactivity is given by the elastic expansion due to the increase of the temperature in the sphere. Thermomechanical behavior and the capability of the system to become subcritical without a very large increase of energy released in the pulse are analysed. The neutronic and thermoelasticity equations are solved in the time. (M.C.K.) [pt

Reactivity worth of gas expansion modules (GEMs) in the fast flux test facility

International Nuclear Information System (INIS)

Campbell, L.R.; Nelson, J.V.; Burke, T.M.; Rawlins, J.A.; Daughtry, J.W.; Bennett, R.A.

1986-01-01

A new passive shutdown device called a gas expansion module (GEM) has been developed at Hanford Engineering Development Laboratory to insert negative reactivity during a primary system loss of flow in a liquid-metal reactor (LMR). A GEM is a hollow removable core component which is sealed at the top and open at the bottom. An argon gas bubble trapped inside the assembly expands when core inlet pressure decreases (caused by a flow reduction) and expels sodium from the assembly. The GEMs are designed so that the level of the liquid-sodium primary system coolant within a GEM is above the top of the core when the primary pumps are operating at full flow and is below the bottom of the core when the primary pumps are off. When a GEM is placed at the boundary of the core and radial reflector, the drop in sodium level increases core neutron leakage and inserts negative reactivity. The results of these measurements confirm the effectiveness of GEMs in adding negative reactivity in loss-of-flow situations. It follows, therefore, that the inherent safety of LMRs, comparable in size to the FFTF, can be enhanced by the use of GEMs

Development of reactivity feedback effect measurement techniques under sub-critical condition in fast reactors

International Nuclear Information System (INIS)

Kitano, A.; Nishi, H.; Suzuki, T.; Okajima, S.; Kanemoto, S.

2012-01-01

The first-of-a-kind reactor has been licensed by a safety examination of the plant design based on the measured data in precedent mock-up experiments. The validity of the safety design can be confirmed without a mock-up experiment, if the reactor feed-back characteristics can be measured before operation, with the constructed reactor itself. The 'Synthesis Method', a systematic and sophisticated method of sub-criticality measurement, is proposed in this work to ensure the safety margin before operation. The 'Synthesis Method' is based on the modified source multiplication method (MSM) combined with the noise analysis method to measure the reference sub-criticality level for MSM. A numerical simulation for the control-rod reactivity worth and the isothermal feed-back reactivity was conducted for typical fast reactors of 100 MWe-size, 300 MWe-size, 750 MWe-size, and 1500 MWe-size to investigate the applicability of Synthesis Method. The number of neutron detectors and their positions necessary for the measurement were investigated for both methods of MSM and the noise analysis by a series of parametric survey calculations. As a result, it was suggested that a neutron detector located above the core center and three or more neutron detectors located above the radial blanket region enable the measurement of sub-criticality within 10% uncertainty from -$0.5 to -$2 and within 15% uncertainty for the deeper sub-criticality. (authors)

Self-esteem, performance feedback, and cardiovascular stress reactivity.

Science.gov (United States)

Hughes, Brian M

2007-09-01

This study sought to establish the impact of performance-related feedback on cardiovascular responses to stressors, and whether this impact is influenced by individual differences in self-esteem. A total of 66 college women were categorized as either high or low in self-esteem on the basis of their scores in a standardized psychometric test. They then took part in a laboratory experiment, in which they were assigned to one of three performance-feedback manipulations. Following the provision of feedback on an initial laboratory task (picture-matching), they undertook a second task (mental arithmetic). Cardiovascular functioning was monitored throughout. Provision of negative feedback to the initial task exerted an adverse impact on cardiovascular responses, suggestive of unhappiness with performance. Provision of positive feedback to the initial task exerted an impact on cardiovascular functioning during the second task, suggestive of task engagement. Importantly, low self-esteem exacerbated the adverse impact of negative feedback. The impact of feedback and the buffering role of self-esteem may have important consequences for cardiovascular health. Further, discrepancies in the findings of previous feedback research may be accounted for by dispositional individual differences.

IAEA Technical Meeting on Innovative Fast Reactor Designs with Enhanced Negative Reactivity Feedback Features. Presentations

International Nuclear Information System (INIS)

2012-01-01

The objective of the TM is to review and discuss the safety characteristics and the performances of the core of innovative fast reactor concepts, as well as to present the ongoing R&D activities in the area of core design and advanced simulation tools and methods for fast reactor core physics analysis. The focus is on fast spectrum cores optimized for actinide utilization and transmutation and, in particular, on core designs with enhanced negative reactivity feedback effects

IAEA Technical Meeting on Innovative Fast Reactor Designs with Enhanced Negative Reactivity Feedback Features. Working Material

International Nuclear Information System (INIS)

2012-01-01

The objective of the TM was to review and discuss the safety characteristics and the performances of the core of innovative fast reactor concepts, as well as to present the ongoing R&D activities in the area of core design and advanced simulation tools and methods for fast reactor core physics analysis. The focus was on fast spectrum cores optimized for actinide utilization and transmutation and, in particular, on core designs with enhanced negative reactivity feedback effects

Expansion of donor-reactive host T cells in primary graft failure after allogeneic hematopoietic SCT following reduced-intensity conditioning.

Science.gov (United States)

Koyama, M; Hashimoto, D; Nagafuji, K; Eto, T; Ohno, Y; Aoyama, K; Iwasaki, H; Miyamoto, T; Hill, G R; Akashi, K; Teshima, T

2014-01-01

Graft rejection remains a major obstacle in allogeneic hematopoietic SCT following reduced-intensity conditioning (RIC-SCT), particularly after cord blood transplantation (CBT). In a murine MHC-mismatched model of RIC-SCT, primary graft rejection was associated with activation and expansion of donor-reactive host T cells in peripheral blood and BM early after SCT. Donor-derived dendritic cells are at least partly involved in host T-cell activation. We then evaluated if such an expansion of host T cells could be associated with graft rejection after RIC-CBT. Expansion of residual host lymphocytes was observed in 4/7 patients with graft rejection at 3 weeks after CBT, but in none of the 17 patients who achieved engraftment. These results suggest the crucial role of residual host T cells after RIC-SCT in graft rejection and expansion of host T cells could be a marker of graft rejection. Development of more efficient T cell-suppressive conditioning regimens may be necessary in the context of RIC-SCT.

Alcohol impairs brain reactivity to explicit loss feedback.

Science.gov (United States)

Nelson, Lindsay D; Patrick, Christopher J; Collins, Paul; Lang, Alan R; Bernat, Edward M

2011-11-01

Alcohol impairs the brain's detection of performance errors as evidenced by attenuated error-related negativity (ERN), an event-related potential (ERP) thought to reflect a brain system that monitors one's behavior. However, it remains unclear whether alcohol impairs performance-monitoring capacity across a broader range of contexts, including those entailing external feedback. This study sought to determine whether alcohol-related monitoring deficits are specific to internal recognition of errors (reflected by the ERN) or occur also in external cuing contexts. We evaluated the impact of alcohol consumption on the feedback-related negativity (FRN), an ERP thought to engage a similar process as the ERN but elicited by negative performance feedback in the environment. In an undergraduate sample randomly assigned to drink alcohol (n = 37; average peak BAC = 0.087 g/100 ml, estimated from breath alcohol sampling) or placebo beverages (n = 42), ERP responses to gain and loss feedback were measured during a two-choice gambling task. Time-frequency analysis was used to parse the overlapping theta-FRN and delta-P3 and clarified the effects of alcohol on the measures. Alcohol intoxication attenuated both the theta-FRN and delta-P3 brain responses to feedback. The theta-FRN attenuation was stronger following loss than gain feedback. Attenuation of both theta-FRN and delta-P3 components indicates that alcohol pervasively attenuates the brain's response to feedback in this task. That theta-FRN attenuation was stronger following loss trials is consistent with prior ERN findings and suggests that alcohol broadly impairs the brain's recognition of negative performance outcomes across differing contexts.

Reactivity variations associated with the core expansion of the MARIA research reactor after modernisation

International Nuclear Information System (INIS)

Krzysztoszek, G.

1997-01-01

Polish high flux research reactor MARIA is a pool type reactor moderated with beryllium and water and cooled with water. The fuel is 80% enriched uranium, in the shape of multitube fuel elements, each tube made up of UAl x alloy in aluminium cladding. MARIA reactor has been operated in the years of 1977-85 and then it was modernised and again put into operation in December 1992. The modernisation as regarded the reactor core comprises a beryllium matrix expansion from 20-48 blocks. Within the frame of the power start-up and trial operation the reactor has been extended from 12 to 18 fuel channels. On that stage of reactor operation the power of mostly loaded fuel channels was constrained to 1,6 MW. Reactor has been operated within the 100-hrs campaign for an irradiation of target materials and for performing measurements at the horizontal channel outlets. In the previous time it has been noticed substantial differences in reactivity changes of the core in similar campaigns of reactor operation. It concerns the reactivity losses during poisoning period of the reactor within the first 30-40 hrs of operation as well as in the fuel burning up process. An analysis of the reactivity variations during the core extension will made possible the fuel management optimisation in further reactor operation system. (author)

Experimental determination of the total isothermal reactivity feedback coefficient for the University of Arizona TRIGA research reactor

International Nuclear Information System (INIS)

Spriggs, Gregory D.; Nelson, George W.

1976-01-01

An experiment was performed to measure the total isothermal (or bath) feedback coefficient of reactivity for the University of Arizona TRIGA Research Reactor (UARR). It was found that the bath coefficient was temperature-dependent and may be represented by the expression α iso .2634 x 10 -2 + .3428 x 10 -3 T - 2.471 x 10 -5 T 2 + 3.476 x 10 -7 T 3 for the temperature range of 7 C to 43 C. (author)

AIREKMOD-RR, Reactivity Transients in Nuclear Research Reactors

International Nuclear Information System (INIS)

Baggoura, B.; Mazrou, H.

2001-01-01

1 - Description of program or function: AIREMOD-RR is a point kinetics code which can simulate fast transients in nuclear research reactor cores. It can also be used for theoretical reactor dynamics studies. It is used for research reactor kinetic analysis and provides a point neutron kinetic capability. The thermal hydraulic behavior is governed by a one-dimensional heat balance equation. The calculations are restricted to a single equivalent unit cell which consists of fuel, clad and coolant. 2 - Method of solution: For transient reactor kinetic calculations a modified Runge Kutta numerical method is used. The external reactivity insertion, specified as a function of time, is converted in dollar ($) unit. The neutron density, energy release and feedback variables are given at each time step. The two types of reactivity feedback considered are: Doppler effect and moderator effect. A new expression for the reactivity dependence on the feedback variables has been introduced in the present version of the code. The feedback reactivities are fitted in power series expression. 3 - Restrictions on the complexity of the problem: The number of delayed neutron groups and the total number of equations are limited only by computer storage capabilities. - Coolant is always in liquid phase. - Void reactivity feedback is not considered

Evidence of fast non-linear feedback in EBR-II rod-drop measurements

International Nuclear Information System (INIS)

Grimm, K.N.; Meneghetti, D.

1987-06-01

Feedback reactivities determine the time dependence of a reactor during and after a transient initiating event. Recent analysis of control-rod drops in the Experimental Breeder Reactor II (EBR-II) Reactor has indicated that some relatively fast feedback may exist which cannot be accounted for by the linear feedback mechanisms. The linear and deduced non-linear feedback reactivities from a control-rod drop in EBR-II run 93A using detailed temperature coefficients of reactivity in the EROS kinetics code have been reported. The transient analyses have now been examined in more detail for times close to the drop to ascertain if additional positive reactivity is being built-in early in the drop which could be gradually released later in the drop

Void reactivity feedback analysis for U-based and Th-based LWR incineration cycles

Energy Technology Data Exchange (ETDEWEB)

Lindley, B.A.; Parks, G.T. [Cambridge University Engineering Department, Trumpington Street, Cambridge, CB2 1PZ (United Kingdom); Franceschini, F. [Westinghouse Electric Company LLC, Cranberry Township, PA (United States)

2013-07-01

In reduced-moderation LWRs, an external supply of transuranic (TRU) can be incinerated by mixing it with a fertile isotope ({sup 238}U or {sup 232}Th) and recycling all the actinides after each cycle. Performance is limited by coolant reactivity feedback - the moderator density coefficient (MDC) must be kept negative. The MDC is worse when more TRU is loaded, but TRU feed is also needed to maintain criticality. To assess the performance of this fuel cycle in different neutron spectra, three LWRs are considered: 'reference' PWRs and reduced-moderation PWRs and BWRs. The MDC of the equilibrium cycle is analysed by reactivity decomposition with perturbed coolant density by isotope and neutron energy. The results show that using {sup 232}Th as a fertile isotope yields superior performance to {sup 238}U. This is due essentially to the high resonance η of U bred from Th (U3), which increases the fissility of the U3-TRU isotope vector in the Th-fueled system relative to the U-fueled system, and also improves the MDC in a sufficiently hard spectrum. Spatial separation of TRU and U3 in the Th-fueled system renders further improvement by hardening the neutron spectrum in the TRU and softening it in the U3. This improves the TRU η and increases the negative MDC contribution from reduced thermal fission in U3. (authors)

Analyses of Design Extended Condition Events for the Prototype Gen-IV SFR

International Nuclear Information System (INIS)

Choi, Chiwoong; Jeong, Taekyung; Lee, Kwilim; Jeong, Jaeho; Ha, Kwiseok

2015-01-01

In this study, the sensitivity tests are conducted. In the case of the UTOP event, a sensitivity test for the reactivity insertion amount and rate were conducted. This analysis can give a requirement for margin of control rod stop system (CRSS). For example, the CRSS in the PRISM designed based on the 0.4 $ reactivity insertion, which is analyzed with safety analysis of UTOP event. Moreover, the sensitivity tests for weighting factor in the core radial expansion reactivity feedback model were also carried out for all ATWS events. Currently, the reactivity feedback model for the PGSFR is not validated yet. However, the reactivity feedback models in the MARS-LMR are validating with various plant-based data including EBR-II SHRT. The ATWS events for the PGSFR classified in the design extended condition including UTOP, ULOF, and ULOHS are analyzed with MARS-LMR. In this study, the sensitivity tests for reactivity insertion amount and rate in the UTOP event are conducted. The reactivity insertion amount is obviously an influential parameter. The reactivity insertion amount can give a requirement for design of the CRSS, therefore, this sensitivity result is very important to the CRSS. In addition, sensitivity tests for the weighting factor in the radial expansion reactivity model are carried out. The weighting factor for a grid plate, W GP , which means contribution of feedback in the grid plate is changed for all unprotected events. The grid plate expansion is governed by a core inlet temperature. As the W GP is increased, the power in the UTOP and the ULOF is increased, however, the power in the ULOHS is decreased. The higher power during transient means lower reactivity feedback and smaller expansion. Thus, the core outlet temperature rise is dominant in the UTOP and ULOF events, however, the core inlet temperature rise is dominant in the ULOHS. Therefore, the grid plate expansion in the ULOHS is predominant

Validation of DRAGON4/DONJON4 simulation methodology for a typical MNSR by calculating reactivity feedback coefficient and neutron flux

Science.gov (United States)

Al Zain, Jamal; El Hajjaji, O.; El Bardouni, T.; Boukhal, H.; Jaï, Otman

2018-06-01

The MNSR is a pool type research reactor, which is difficult to model because of the importance of neutron leakage. The aim of this study is to evaluate a 2-D transport model for the reactor compatible with the latest release of the DRAGON code and 3-D diffusion of the DONJON code. DRAGON code is then used to generate the group macroscopic cross sections needed for full core diffusion calculations. The diffusion DONJON code, is then used to compute the effective multiplication factor (keff), the feedback reactivity coefficients and neutron flux which account for variation in fuel and moderator temperatures as well as the void coefficient have been calculated using the DRAGON and DONJON codes for the MNSR research reactor. The cross sections of all the reactor components at different temperatures were generated using the DRAGON code. These group constants were used then in the DONJON code to calculate the multiplication factor and the neutron spectrum at different water and fuel temperatures using 69 energy groups. Only one parameter was changed where all other parameters were kept constant. Finally, Good agreements between the calculated and measured have been obtained for every of the feedback reactivity coefficients and neutron flux.

A study of temperature coefficients of reactivity for a Savannah River Site tritium-producing charge

International Nuclear Information System (INIS)

George, D.L.; Frost, R.L.

1991-01-01

Temperature coefficients of reactivity have been calculated for the Mark 22 assembly in the K-14 charge at the Savannah River Site. Temperature coefficients are the most important reactivity feedback mechanism in SRS reactors; they are used in all safety analyses performed in support of the Safety Analysis Report, and in operations to predict reactivity changes with control rod moves. The effects of the radial location of the assembly in the reactor, isotope depletion, and thermal expansion of the metal components on the temperature coefficients have also been investigated. With the exception of the dead space coefficient, all of the regional temperature coefficients were found to be negative or zero. All of the temperature coefficients become more negative with isotopic depletion over the fuel cycle. Coefficients also become more negative with increasing radial distance of the assembly from the center of the core; this is proven from first principles and confirmed by calculations. It was found that axial and radial thermal expansion effects on the metal fuel and target tubes counteract one another, indicating these effects do not need to be considered in future temperature coefficient calculations for the Mark 22 assembly. The moderator coefficient was found to be nonlinear with temperature; thus, the values derived for accidents involving increases in moderator temperature are significantly different than those for decreases in moderator temperature, although the moderator coefficient is always negative

Sensitivity Tests for the Unprotected Events of the Prototype Gen-IV SFR

Energy Technology Data Exchange (ETDEWEB)

Choi, Chiwoong; Lee, Kwilim; Jeong, Jaeho; Yu, Jin; An, Sangjun; Lee, Seung Won; Chang, Wonpyo; Ha, Kwiseok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

Unprotected Transient Over Power, (UTOP), Unprotected Loss Of Flow (ULOF), and Unprotected Loss Of Heat Sink (ULOHS) are selected as ATWS events. Among these accidents, the ULOF event shows the lowest clad temperature. However, the ULOHS event showed the highest peak clad temperature, due to the positive CRDL/RV expansion reactivity feedback and insufficient DHRS capacity. In this study, the sensitivity tests are conducted. In the case of the UTOP event, a sensitivity test for the reactivity insertion amount and rate were conducted. This analysis can give a requirement for margin of control rod stop system (CRSS). Currently, the reactivity feedback model for the PGSFR is not validated yet. However, the reactivity feedback models in the MARS-LMR are validating with various plant-based data including EBR-II SHRT. The ATWS events for the PGSFR classified in the design extended condition including UTOP, ULOF, and ULOHS are analyzed with MARS-LMR. In this study, the sensitivity tests for reactivity insertion amount and rate in the UTOP event are conducted. The reactivity insertion amount is obviously an influential parameter. The reactivity insertion amount can give a requirement for design of the CRSS, therefore, this sensitivity result is very important to the CRSS. In addition, sensitivity tests for the weighting factor in the radial expansion reactivity model are carried out. The weighting factor for a grid plate, W{sub GP}, which means contribution of feedback in the grid plate is changed for all unprotected events. The grid plate expansion is governed by a core inlet temperature. As the W{sub GP} is increased, the power in the UTOP and the ULOF is increased, however, the power in the ULOHS is decreased. The higher power during transient means lower reactivity feedback and smaller expansion. Thus, the core outlet temperature rise is dominant in the UTOP and ULOF events, however, the core inlet temperature rise is dominant in the ULOHS. Therefore, the grid plate

Performance feedback, self-esteem, and cardiovascular adaptation to recurring stressors.

Science.gov (United States)

Brown, Eoin G; Creaven, Ann-Marie

2017-05-01

This study sought to examine the effects of performance feedback and individual differences in self-esteem on cardiovascular habituation to repeat stress exposure. Sixty-six university students (n = 39 female) completed a self-esteem measure and completed a cardiovascular stress-testing protocol involving repeated exposure to a mental arithmetic task. Cardiovascular functioning was sampled across four phases: resting baseline, initial stress exposure, a recovery period, and repeated stress exposure. Participants were randomly assigned to receive fictional positive feedback, negative feedback, or no feedback following the recovery period. Negative feedback was associated with a sensitized blood pressure response to a second exposure of the stress task. Positive feedback was associated with decreased cardiovascular and psychological responses to a second exposure. Self-esteem was also found to predict reactivity and this interacted with the type of feedback received. These findings suggest that negative performance feedback sensitizes cardiovascular reactivity to stress, whereas positive performance feedback increases both cardiovascular and psychological habituation to repeat exposure to stressors. Furthermore, an individual's self-esteem also appears to influence this process.

Modelling The Effects of Aggregate Size on Alkali Aggregate Reaction Expansion

Directory of Open Access Journals (Sweden)

N. Z. Sekrane

2014-06-01

Full Text Available This work aims at developing models to predict the potential expansion of concrete containing alkali-reactive aggregates. The paper gives measurements in order to provide experimental data concerning the effect of particle size of an alkali-reactive siliceous limestone on mortar expansion. Results show that no expansion was measured on the mortars using small particles (0.5-1.0 mm while the particles (1.0–2.0 mm gave the largest expansions (0.217%. Two models are proposed, the first one studies the correlations between the measured expansions and the size of aggregates, the second one calculates the thickness of the porous zone necessary to take again all the volume of the gel created.

Classification of transient processes with a jumplike change in the reactivity

International Nuclear Information System (INIS)

Sabaeva, T.A.

1989-01-01

The problem of the change in the neutron flux density accompanying a jumplike (instantaneous) change in the reactivity is classical and is studied in most textbooks and monographs devoted to the regulation of nuclear reactors, where in constructing the response only the feedback on delayed neutrons is taken into account. The use of a linear feedback of a general form permits describing reactors of different types. A classification of feedbacks on reactivity was presented by Sabaeva, where a parabolic region in phase space is separated. A peak in the neutron flux corresponds to the image point falling into this region. In this paper the conditions making it possible to find the change in the neutrons flux immediately after an instantaneous change in the reactivity are derived, and the feedbacks are classified based on this

Mineralogy, geochemistry and expansion testing of an alkali-reactive basalt from western Anatolia, Turkey

International Nuclear Information System (INIS)

Copuroglu, Oguzhan; Andic-Cakir, Ozge; Broekmans, Maarten A.T.M.; Kuehnel, Radko

2009-01-01

In this paper, the alkali-silica reaction performance of a basalt rock from western Anatolia, Turkey is reported. It is observed that the rock causes severe gel formation in the concrete microbar test. It appears that the main source of expansion is the reactive glassy phase of the basalt matrix having approximately 70% of SiO 2 . The study presents the microstructural characteristics of unreacted and reacted basalt aggregate by optical and electron microscopy and discusses the possible reaction mechanism. Microstructural analysis revealed that the dissolution of silica is overwhelming in the matrix of the basalt and it eventually generates four consequences: (1) Formation of alkali-silica reaction gel at the aggregate perimeter, (2) increased porosity and permeability of the basalt matrix, (3) reduction of mechanical properties of the aggregate and (4) additional gel formation within the aggregate. It is concluded that the basalt rock is highly prone to alkali-silica reaction. As an aggregate, this rock is not suitable for concrete production.

Mineralogy, geochemistry and expansion testing of an alkali-reactive basalt from western Anatolia, Turkey

Energy Technology Data Exchange (ETDEWEB)

Copuroglu, Oguzhan, E-mail: O.Copuroglu@CiTG.TUDelft.NL [Delft University of Technology, Faculty of CiTG, Materials and Environment, Stevinweg 1, 2628CN, Delft (Netherlands); Andic-Cakir, Ozge [Ege University, Civil Engineering Dept., 35100 Bornova, Izmir (Turkey); Broekmans, Maarten A.T.M. [Geological Survey of Norway, Dept. of Mineral Characterization, N-7491 Trondheim (Norway); Kuehnel, Radko [Burgemeester Merkusstraat 5, 2645 NJ, Delfgauw (Netherlands)

2009-07-15

In this paper, the alkali-silica reaction performance of a basalt rock from western Anatolia, Turkey is reported. It is observed that the rock causes severe gel formation in the concrete microbar test. It appears that the main source of expansion is the reactive glassy phase of the basalt matrix having approximately 70% of SiO{sub 2}. The study presents the microstructural characteristics of unreacted and reacted basalt aggregate by optical and electron microscopy and discusses the possible reaction mechanism. Microstructural analysis revealed that the dissolution of silica is overwhelming in the matrix of the basalt and it eventually generates four consequences: (1) Formation of alkali-silica reaction gel at the aggregate perimeter, (2) increased porosity and permeability of the basalt matrix, (3) reduction of mechanical properties of the aggregate and (4) additional gel formation within the aggregate. It is concluded that the basalt rock is highly prone to alkali-silica reaction. As an aggregate, this rock is not suitable for concrete production.

Modal analysis of temperature feedback in oscillations induced by xenon

International Nuclear Information System (INIS)

Passos, E.M. dos.

1976-01-01

The flux oscillations induced by Xenon distribution in homogeneous thermal reactors are studied treating the space dependence through the modal expansion technique and the stability limits against power oscillations and spatial oscillations are determined. The effect of the feedbacks due to Xenon and temperature coefficient on the linear stability of the free system is investigated employing several number of terms in the transient expansion, considering the various sizes of the reactor. The heat transfer model considered includes one term due to cooling proportional to the temperature. A PWR model reactor is utilized for numerical calculations. It is found that a slightly higher temperature feedback coefficient is necessary for stability against power oscillations when larger number of terms in the transient modal expansion is maintained. (author)

Reactivity balance for a soluble boron-free small modular reactor

Directory of Open Access Journals (Sweden)

Lezani van der Merwe

2018-06-01

Full Text Available Elimination of soluble boron from reactor design eliminates boron-induced reactivity accidents and leads to a more negative moderator temperature coefficient. However, a large negative moderator temperature coefficient can lead to large reactivity feedback that could allow the reactor to return to power when it cools down from hot full power to cold zero power. In soluble boron-free small modular reactor (SMR design, only control rods are available to control such rapid core transient.The purpose of this study is to investigate whether an SMR would have enough control rod worth to compensate for large reactivity feedback. The investigation begins with classification of reactivity and completes an analysis of the reactivity balance in each reactor state for the SMR model.The control rod worth requirement obtained from the reactivity balance is a minimum control rod worth to maintain the reactor critical during the whole cycle. The minimum available rod worth must be larger than the control rod worth requirement to manipulate the reactor safely in each reactor state. It is found that the SMR does have enough control rod worth available during rapid transient to maintain the SMR at subcritical below k-effectives of 0.99 for both hot zero power and cold zero power. Keywords: Control Rod Worth, Reactivity Balance, Reactivity Feedback, Small Modular Reactor, Soluble Boron Free

Study of non-contact measurement of the thermal expansion coefficients of materials based on laser feedback interferometry

Energy Technology Data Exchange (ETDEWEB)

Zheng, Fasong [The State Key Lab of Precision Measurement Technology and Instrument, Department of Precision Instruments, Tsinghua University, Beijing 100084 (China); Departments of Physics, College of Science, Beijing University of Chemical Technology, Beijing 100029 (China); Tan, Yidong; Zhang, Shulian, E-mail: zsl-dpi@mail.tsinghua.edu.cn [The State Key Lab of Precision Measurement Technology and Instrument, Department of Precision Instruments, Tsinghua University, Beijing 100084 (China); Lin, Jing; Ding, Yingchun [Departments of Physics, College of Science, Beijing University of Chemical Technology, Beijing 100029 (China)

2015-04-15

The noncooperative and ultrahigh sensitive length measurement approach is of great significance to the study of a high-precision thermal expansion coefficient (TEC) determination of materials at a wide temperature range. The novel approach is presented in this paper based on the Nd:YAG microchip laser feedback interferometry with 1064 nm wavelength, the beam frequency of which is shifted by a pair of acousto-optic modulators and then the heterodyne phase measurement technique is used. The sample is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams are perpendicular and coaxial on each surface of the sample, the configuration which can not only achieve the length measurement of sample but also eliminate the influence of the distortion of the sample supporter. The reference beams inject on the reference mirrors which are put as possible as near the holes, respectively, to eliminate the air disturbances and the influence of thermal lens effect out of the furnace chamber. For validation, the thermal expansion coefficients of aluminum and steel 45 samples are measured from room temperature to 748 K, which proved measurement repeatability of TECs is better than 0.6 × 10{sup −6}(K{sup −1}) at the range of 298 K–598 K and the high-sensitive non-contact measurement of the low reflectivity surface induced by the oxidization of the samples at the range of 598 K–748 K.

The CRDL model of SSC-K code for the safety improvement of a pool-type liquid metal-cooled reactor

International Nuclear Information System (INIS)

Jung, H. Y.; Ha, K. S.; Jang, W. P.; Hu, S.; Lee, Y. B.

2004-01-01

With the increased thermal power of KALIMER-600, it becomes important to model accurately the reactivity feedback effects due to the thermal expansion of a fuel rod and internal structure during a transient. In KALIMER design, the fuel axial expansion, core radial expansion, and the control rod drive line/reactor vessel (CRDL/RV) thermal expansion are the important reactivity feedback mechanisms. It is required to develop a more detailed CRDL/RV model for the accurate analysis of the KALIMER-600 transient because the control rod drive line of 9.5 m is immersed in the hot pool. For this a new CRDL/RV model was developed to model the effect of expansion of CRDL utilizing the temperature distribution obtained with the hot-pool 2-D model of SSC-K code. It is estimated that the developed model describes more realistically the negative reactivity insertion effect due to the initial temperature change during the UTOP transient of KALIMER-150

Study of reactivity feedbacks in a sodium-cooled fast reactor: new methodology based on perturbation theory for evaluating neutronic uncertainties

International Nuclear Information System (INIS)

Bouret, Cyrille

2014-01-01

Fast reactors (FR) can give value to the plutonium produced by the existing light water reactors and allow the transmutation of a significant part of the final nuclear waste. These features offer industrial prospects for this technology and new projects are currently studied in the world such as ASTRID prototype in France. Future FRs will have also to satisfy new requirements in terms of competitiveness, safety and reliability. In this context, the new core concept envisaged for ASTRID incorporate innovative features that improve the safety of the reactor in case of accident. The proposed design achieves a sodium voiding effect close to zero: it includes a fertile plate in the middle of the core and a sodium plenum in the upper part in order to increase the neutron leakage in case of sodium voiding. This heterogeneous design represents a challenge for the calculation tools and methods used so far to evaluate the neutronic parameters in traditional homogeneous cores. These methods have been improved over the thesis to rigorously treat the neutron streaming, especially at the mediums interfaces. These enhancements have consisted in the development of a specific analysis methodology based on perturbation theory and using a modern three dimensional Sn transport solver. This work has allowed on the one hand, to reduce the bias on static neutronic parameters in comparison with Monte Carlo methods, and, on the other hand, to obtain more accurate spatial distributions of neutronic effects including the reactivity feedback coefficients used for transient analysis. The analysis of the core behavior during transients has also allowed estimating the impact of reactivity feedback coefficients assessment improvements. In conjunction with this work, innovative methods based on the evaluation of local sensitivities coefficients have been proposed to assess the uncertainties associated to local reactivity effects. These uncertainties include the correlations between the different

Various reactivity effects value for assuring fast reactor core inherent safety

International Nuclear Information System (INIS)

Belov, S.B.; Vasilyev, B.A.

1991-01-01

The paper presents the results of temperature and power reactivity feedback components calculations for fast reactors with different core volume when using oxide, carbide, nitride and metal fuel. Reactor parameters change in loss of flow without scram and transient over power without scram accidents was evaluated. The importance of various reactivity feedback components in restricting the consequences of these accidents has been analyzed. (author)

Reactivity transient calculatios in research reactor

International Nuclear Information System (INIS)

Santos, R.S. dos

1986-01-01

A digital program for reactivity transient analysis in research reactor and cylindrical geometry was showed quite efficient when compared with methods and programs of the literature, as much in the solution of the neutron kinetics equation as in the thermohydraulic. An improvement in the representation of the feedback reactivity adopted on the program reduced markedly the computation time, with some accuracy. (Author) [pt

A Mechanistic Reliability Assessment of RVACS and Metal Fuel Inherent Reactivity Feedbacks

Energy Technology Data Exchange (ETDEWEB)

Grabaskas, David; Brunett, Acacia J.; Passerini, Stefano; Grelle, Austin

2017-09-24

GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory (Argonne) participated in a two year collaboration to modernize and update the probabilistic risk assessment (PRA) for the PRISM sodium fast reactor. At a high level, the primary outcome of the project was the development of a next-generation PRA that is intended to enable risk-informed prioritization of safety- and reliability-focused research and development. A central Argonne task during this project was a reliability assessment of passive safety systems, which included the Reactor Vessel Auxiliary Cooling System (RVACS) and the inherent reactivity feedbacks of the metal fuel core. Both systems were examined utilizing a methodology derived from the Reliability Method for Passive Safety Functions (RMPS), with an emphasis on developing success criteria based on mechanistic system modeling while also maintaining consistency with the Fuel Damage Categories (FDCs) of the mechanistic source term assessment. This paper provides an overview of the reliability analyses of both systems, including highlights of the FMEAs, the construction of best-estimate models, uncertain parameter screening and propagation, and the quantification of system failure probability. In particular, special focus is given to the methodologies to perform the analysis of uncertainty propagation and the determination of the likelihood of violating FDC limits. Additionally, important lessons learned are also reviewed, such as optimal sampling methodologies for the discovery of low likelihood failure events and strategies for the combined treatment of aleatory and epistemic uncertainties.

Walking Flexibility after Hemispherectomy: Split-Belt Treadmill Adaptation and Feedback Control

Science.gov (United States)

Choi, Julia T.; Vining, Eileen P. G.; Reisman, Darcy S.; Bastian, Amy J.

2009-01-01

Walking flexibility depends on use of feedback or reactive control to respond to unexpected changes in the environment, and the ability to adapt feedforward or predictive control for sustained alterations. Recent work has demonstrated that cerebellar damage impairs feedforward adaptation, but not feedback control, during human split-belt treadmill…

Intense passionate love attenuates cigarette cue-reactivity in nicotine-deprived smokers: an FMRI study.

Directory of Open Access Journals (Sweden)

Xiaomeng Xu

Full Text Available Self-expanding experiences like falling in love or engaging in novel, exciting and interesting activities activate the same brain reward mechanism (mesolimbic dopamine pathway that reinforces drug use and abuse, including tobacco smoking. This suggests the possibility that reward from smoking is substitutable by self-expansion (through competition with the same neural system, potentially aiding cessation efforts. Using a model of self-expansion in the context of romantic love, the present fMRI experiment examined whether, among nicotine-deprived smokers, relationship self-expansion is associated with deactivation of cigarette cue-reactivity regions. Results indicated that among participants who were experiencing moderate levels of craving, cigarette cue-reactivity regions (e.g., cuneus and posterior cingulate cortex showed significantly less activation during self-expansion conditions compared with control conditions. These results provide evidence that rewards from one domain (self-expansion can act as a substitute for reward from another domain (nicotine to attenuate cigarette cue reactivity.

Intense passionate love attenuates cigarette cue-reactivity in nicotine-deprived smokers: an FMRI study.

Science.gov (United States)

Xu, Xiaomeng; Wang, Jin; Aron, Arthur; Lei, Wei; Westmaas, J Lee; Weng, Xuchu

2012-01-01

Self-expanding experiences like falling in love or engaging in novel, exciting and interesting activities activate the same brain reward mechanism (mesolimbic dopamine pathway) that reinforces drug use and abuse, including tobacco smoking. This suggests the possibility that reward from smoking is substitutable by self-expansion (through competition with the same neural system), potentially aiding cessation efforts. Using a model of self-expansion in the context of romantic love, the present fMRI experiment examined whether, among nicotine-deprived smokers, relationship self-expansion is associated with deactivation of cigarette cue-reactivity regions. Results indicated that among participants who were experiencing moderate levels of craving, cigarette cue-reactivity regions (e.g., cuneus and posterior cingulate cortex) showed significantly less activation during self-expansion conditions compared with control conditions. These results provide evidence that rewards from one domain (self-expansion) can act as a substitute for reward from another domain (nicotine) to attenuate cigarette cue reactivity.

Inverse uncertainty quantification of reactor simulations under the Bayesian framework using surrogate models constructed by polynomial chaos expansion

Energy Technology Data Exchange (ETDEWEB)

Wu, Xu, E-mail: xuwu2@illinois.edu; Kozlowski, Tomasz

2017-03-15

Modeling and simulations are naturally augmented by extensive Uncertainty Quantification (UQ) and sensitivity analysis requirements in the nuclear reactor system design, in which uncertainties must be quantified in order to prove that the investigated design stays within acceptance criteria. Historically, expert judgment has been used to specify the nominal values, probability density functions and upper and lower bounds of the simulation code random input parameters for the forward UQ process. The purpose of this paper is to replace such ad-hoc expert judgment of the statistical properties of input model parameters with inverse UQ process. Inverse UQ seeks statistical descriptions of the model random input parameters that are consistent with the experimental data. Bayesian analysis is used to establish the inverse UQ problems based on experimental data, with systematic and rigorously derived surrogate models based on Polynomial Chaos Expansion (PCE). The methods developed here are demonstrated with the Point Reactor Kinetics Equation (PRKE) coupled with lumped parameter thermal-hydraulics feedback model. Three input parameters, external reactivity, Doppler reactivity coefficient and coolant temperature coefficient are modeled as uncertain input parameters. Their uncertainties are inversely quantified based on synthetic experimental data. Compared with the direct numerical simulation, surrogate model by PC expansion shows high efficiency and accuracy. In addition, inverse UQ with Bayesian analysis can calibrate the random input parameters such that the simulation results are in a better agreement with the experimental data.

Utilizing the Fast Flux Test Facility for international passive safety testing

International Nuclear Information System (INIS)

Shen, P.K.; Padilla, A.; Lucoff, D.M.; Waltar, A.E.

1991-01-01

A two-phased approach has been undertaken in the Fast Flux Test Facility (FFTF) to conduct passive safety testing. Phase I (1986 to 1987) was structured to obtain an initial understanding of the reactivity feedback components. The planned Phase II (1992 to 1993) international program will extend the testing to include static and dynamic feedback measurements, transient and demonstration tests, and gas expansion module (GEM) reactivity tests. The primary objective is to meet the needs for safety analysis code validation, with particular emphasis on reducing the uncertainties associated with structure reactivity feedback. Program scope and predicted FFTF responses are discussed and illustrated. (author)

Effect of beam expansion loss in a carbon nanotube-doped PVA film on passively mode-locked erbium-doped fiber lasers with different feedback ratios

International Nuclear Information System (INIS)

Cheng, Kuang-Nan; Chi, Yu-Chieh; Cheng, Chih-Hsien; Lin, Yung-Hsiang; Lo, Jui-Yung; Lin, Gong-Ru

2014-01-01

The effect of beam expansion induced divergent loss in a single-wall carbon nanotube (SWCNT) doped polyvinyl alcohol (PVA) based ultrafast saturable absorber (SA) film thickness on the passive mode-locking (PML) performances of erbium-doped fiber lasers are demonstrated. The variation on the PML pulsewidth of the EDFL is discussed by changing the SWCNT-PVA SA film thicknesses, together with adjusting the pumping power and the intra-cavity feedback ratio. An almost 6 dB increment of divergent loss when enlarging the SWCNT-PVA based SA film thickness from 30–130 µm is observed. When shrinking the SA thickness to 30 µm at the largest pumping power of 52.5 mW, the optical spectrum red-shifts to 1558.8 nm with its 3 dB spectral linewidth broadening up to 2.7 nm, while the pulse has already entered the soliton regime with multi-order Kelly sidebands aside the spectral shoulder. The soliton pulsewidth is as short as 790 fs, which is much shorter than those obtained with other thicker SWCNT doped PVA polymer film based SAs; therefore, the peak power from the output of the PML-EDFL is significantly enlarged accompanied by a completely suppressed residual continuous-wave level to achieve the largest on/off extinction ratio. The main mechanism of pulse shortening with reducing thickness of SWCNT doped PVA polymer film based SA is attributed to the limited beam expansion as well as the enlarged modulation depth, which results in shortened soliton pulsewidth with a clean dc background, and broadened spectrum with enriched Kelly sidebands. The increase of total SWCNT amount in the thicker SA inevitably causes a higher linear absorption; hence, the mode-locking threshold also rises accordingly. By enlarging pumping power from 38.5–52.5 mW, the highest ascent on pulse extinction of up to 32 dB is observed among all kinds of feedback conditions. Nevertheless, the enlargement on the extinction slightly decays with increasing the feedback ratio from 30–90

Calculation of the fuel temperature coefficient of reactivity considering non-uniform radial temperature distribution in the fuel rod

Energy Technology Data Exchange (ETDEWEB)

Pazirandeh, Ali [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Science and Research Branch; Hooshyar Mobaraki, Almas

2017-07-15

The safe operation of a reactor is based on feedback models. In this paper we attempted to discuss the influence of a non-uniform radial temperature distribution on the fuel rod temperature coefficient of reactivity. The paper demonstrates that the neutron properties of a reactor core is based on effective temperature of the fuel to obtain the correct fuel temperature feedback. The value of volume-averaged temperature being used in the calculations of neutron physics with feedbacks would result in underestimating the probable event. In the calculation it is necessary to use the effective temperature of the fuel in order to provide correct accounting of the fuel temperature feedback. Fuel temperature changes in different zones of the core and consequently reactivity coefficient change are an important parameter for analysis of transient conditions. The restricting factor that compensates the inserted reactivity is the temperature reactivity coefficient and effective delayed neutron fraction.

Digital reactivity meter

International Nuclear Information System (INIS)

Copie, M.; Valantic, B.

1978-01-01

Digital reactivity meters (DRM) are mostly used as measuring instruments, e.g. for calibration of control rods, and there are only a few cases of their incorporation into the control systems of the reactors. To move in this direction there is more development work needed. First of all, fast algorithms are needed for inverse kinetics equations to relieve the computer for more important tasks of reactor model solving in real time. The next problem, currently under investigation, is the incorporation of the reactor thermal-hydraulic model into the DRM so that it can be used in the power range. Such an extension of DHM allows presentation not only of the instantaneous reactivity of the system, but also the inserted reactivity can be estimated from the temperature reactivity feed-backs. One of the applications of this concept is the anomalous digital reactivity monitor (ADRN) as part of the reactor protection system. As a solution of the first problem, a fast algorithm for solving the inverse kinetics equations has been implemented in the off-line program RODCAL on CDC 1700 computer and tested for its accuracy by performing different control rod calibrations on the reactor TRIGA

Dynamic Performance of the ITER Reactive Power Compensation System

International Nuclear Information System (INIS)

Sheng Zhicai; Fu Peng; Xu Liuwei

2011-01-01

Dynamic performance of a reactive power compensation (RPC) system for the international thermonuclear experimental reactor (ITER) power supply is presented. Static var compensators (SVCs) are adopted to mitigate voltage fluctuation and reduce the reactive power down to a level acceptable for the French/European 400 kV grid. A voltage feedback and load power feedforward controller for SVC is proposed, with the feedforward loop intended to guarantee short response time and the feedback loop ensuring good dynamics and steady characteristics of SVC. A mean filter was chosen to measure the control signals to improve the dynamic response. The dynamic performance of the SVC is verified by simulations using PSCAD/EMTDC codes.

Impaired Feedforward Control and Enhanced Feedback Control of Speech in Patients with Cerebellar Degeneration.

Science.gov (United States)

Parrell, Benjamin; Agnew, Zarinah; Nagarajan, Srikantan; Houde, John; Ivry, Richard B

2017-09-20

The cerebellum has been hypothesized to form a crucial part of the speech motor control network. Evidence for this comes from patients with cerebellar damage, who exhibit a variety of speech deficits, as well as imaging studies showing cerebellar activation during speech production in healthy individuals. To date, the precise role of the cerebellum in speech motor control remains unclear, as it has been implicated in both anticipatory (feedforward) and reactive (feedback) control. Here, we assess both anticipatory and reactive aspects of speech motor control, comparing the performance of patients with cerebellar degeneration and matched controls. Experiment 1 tested feedforward control by examining speech adaptation across trials in response to a consistent perturbation of auditory feedback. Experiment 2 tested feedback control, examining online corrections in response to inconsistent perturbations of auditory feedback. Both male and female patients and controls were tested. The patients were impaired in adapting their feedforward control system relative to controls, exhibiting an attenuated anticipatory response to the perturbation. In contrast, the patients produced even larger compensatory responses than controls, suggesting an increased reliance on sensory feedback to guide speech articulation in this population. Together, these results suggest that the cerebellum is crucial for maintaining accurate feedforward control of speech, but relatively uninvolved in feedback control. SIGNIFICANCE STATEMENT Speech motor control is a complex activity that is thought to rely on both predictive, feedforward control as well as reactive, feedback control. While the cerebellum has been shown to be part of the speech motor control network, its functional contribution to feedback and feedforward control remains controversial. Here, we use real-time auditory perturbations of speech to show that patients with cerebellar degeneration are impaired in adapting feedforward control of

Current questions about feedback effects in thermal reactors

International Nuclear Information System (INIS)

Buenemann, D.

1977-01-01

The present paper deals with transforming 3d-distributions to reactivity values of point kinetics and with space - and time-dependent feedbacks - not determinable by point kinetics - distinguishing in each case between nuclear (Xenon, Doppler) and thermohydraulic effects. (RW) [de

An alternative approach to the management of reactive metals: tolerant cementitious systems

International Nuclear Information System (INIS)

Swift, P.; Cox, J.; Wise, M.; McKinney, J.; Rhodes, C.

2015-01-01

In recent years research has focused on preventing or minimising corrosion of reactive metals to ensure long-term waste package integrity. An alternative approach to the encapsulation of reactive metals is being explored. The approach will identify a cementitious-based encapsulating material that will allow corrosion of reactive metals to occur in a controlled and predictable manner, rather than seeking to limit or prevent the corrosion, whilst retaining waste package integrity. A low strength grout will be developed that will be 'tolerant' to the expansive forces generated by the corrosion products of reactive metals. Novel cementitious systems (e.g. foamed cements, rubber composite cements, cenosphere composite cements, lime mortars, bentonite cements etc.) that may be tolerant to potentially expansive waste products, such as reactive metals will be considered and assessed in a series of small-scale preliminary trials (compressive strength, porosity, permeability, pore solution pH, etc.)

Nuclear data propagation with burnup. Impact on SFR reactivity coefficients

International Nuclear Information System (INIS)

Buiron, Laurent; Plisson-Rieunier, Daniele

2017-01-01

For the next generation fast reactor design, the Generation IV International Forum (GIF) defined global objectives in terms of safety improvement, sustainability, waste minimization and non-proliferation. Among the possibilities studied at CEA, Sodium cooled Fast Reactor (SFR) are studied as potential industrial tools for next decade's deployment. Many efforts have been made in the last years to obtain advanced industrial core designs that comply with these goals. Concerning safety issues, particular efforts have been made in order to obtain core designs that can be resilient to accidental transients. The 'safety' level of such new designs is often characterized by their 'natural' behavior under unprotected transients such as loss of flow or hypothetical transient over power. Transient analysis needs several accurate neutronic input data such as reactivity coefficient and kinetic parameters. Beside estimation of the level of 'absolute' values, associated uncertainties have also to be evaluated for the whole set of relevant data. These estimations have to be performed for different core state such as end of cycle core for feedback coefficient. This means that uncertainties have to be obtained not only a fixed time but also have to be propagated all through irradiation. To do so, we need to couple Boltzman and Bateman equations at sensitivities level. The coupling process could be done with the help of the perturbation theory which gives adapted framework suited for deterministic calculation codes. This coupling is currently in progress in ERANOS code system. The actual implementation gives access to estimation of sensitivities for both reactivity coefficients and mass balance. After a brief theoretical description of Boltzman/Bateman coupling capabilities in ERANOS, the study presented in this paper focuses on sensitivity and uncertainties estimation for the main feedback coefficients involved in fast reactor transients: the

Backup passive reactivity shutdown systems

International Nuclear Information System (INIS)

Ashurko, Yu.M.; Kuznetsov, L.A.

1996-01-01

The paper reviews self-actuated shutdown systems (SASSs) for liquid metal-cooled fast reactors (LMFRs). Principles of operation are described, advantages and drawbacks analyzed, and prospects for application in advanced fast reactors examined. Ways to improve reactor self-protection via reactivity feedback amplification and related problems are discussed. (author). 9 refs, 12 figs

Backup passive reactivity shutdown systems

Energy Technology Data Exchange (ETDEWEB)

Ashurko, Yu M; Kuznetsov, L A [Institute of Physics and Power Engineering, Obninsk (Russian Federation)

1996-12-01

The paper reviews self-actuated shutdown systems (SASSs) for liquid metal-cooled fast reactors (LMFRs). Principles of operation are described, advantages and drawbacks analyzed, and prospects for application in advanced fast reactors examined. Ways to improve reactor self-protection via reactivity feedback amplification and related problems are discussed. (author). 9 refs, 12 figs.

A DFIG Islanding Detection Scheme Based on Reactive Power Infusion

Science.gov (United States)

Wang, M.; Liu, C.; He, G. Q.; Li, G. H.; Feng, K. H.; Sun, W. W.

2017-07-01

A lot of research has been done on photovoltaic (the “PV”) power system islanding detection in recent years. As a comparison, much less attention has been paid to islanding in wind turbines. Meanwhile, wind turbines can work in islanding conditions for quite a long period, which can be harmful to equipments and cause safety hazards. This paper presents and examines a double fed introduction generation (the “DFIG”) islanding detection scheme based on feedback of reactive power and frequency and uses a trigger signal of reactive power infusion which can be obtained by dividing the voltage total harmonic distortion (the "THD") by the voltage THD of last cycle to avoid the deterioration of power quality. This DFIG islanding detection scheme uses feedback of reactive power current loop to amplify the frequency differences in islanding and normal conditions. Simulation results show that the DFIG islanding detection scheme is effective.

Relations among several nuclear and electronic density functional reactivity indexes

Science.gov (United States)

Torrent-Sucarrat, Miquel; Luis, Josep M.; Duran, Miquel; Toro-Labbé, Alejandro; Solà, Miquel

2003-11-01

An expansion of the energy functional in terms of the total number of electrons and the normal coordinates within the canonical ensemble is presented. A comparison of this expansion with the expansion of the energy in terms of the total number of electrons and the external potential leads to new relations among common density functional reactivity descriptors. The formulas obtained provide explicit links between important quantities related to the chemical reactivity of a system. In particular, the relation between the nuclear and the electronic Fukui functions is recovered. The connection between the derivatives of the electronic energy and the nuclear repulsion energy with respect to the external potential offers a proof for the "Quantum Chemical le Chatelier Principle." Finally, the nuclear linear response function is defined and the relation of this function with the electronic linear response function is given.

LFR safety features through intrinsic negative reactivity feedbacks

International Nuclear Information System (INIS)

Grasso, Giacomo

2012-01-01

The safety of Lead-cooled Fast Reactors can rely on intrinsic features such as: • the impossibility of Lead boiling, hence the unreliability of core (only) voiding; • the buoyancy of Control Rods in Lead, allowing their safe positioning also below the active region. For heightening the safety features of LFRs in safety analyses it could be required to approach the evaluation of the reactivity coefficients from a more physical point of view, including more elementary mechanisms, each one related to the proper driving temperature

Consistency Over Flattery: Self-Verification Processes Revealed in Implicit and Behavioral Responses to Feedback

OpenAIRE

Ayduk, O; Gyurak, A; Akinola, M; Mendes, WB

2013-01-01

Negative social feedback is often a source of distress. However, self-verification theory provides the counterintuitive explanation that negative feedback leads to less distress when it is consistent with chronic self-views. Drawing from this work, the present study examined the impact of receiving self-verifying feedback on outcomes largely neglected in prior research: implicit responses (i.e., physiological reactivity, facial expressions) that are difficult to consciously regulate and downs...

EBRPOCO - a program to calculate detailed contributions of power reactivity components of EBR-II

International Nuclear Information System (INIS)

Meneghetti, D.; Kucera, D.A.

1981-01-01

The EBRPOCO program has been developed to facilitate the calculations of the power coefficients of reactivity of EBR-II loadings. The program enables contributions of various components of the power coefficient to be delineated axially for every subassembly. The program computes the reactivity contributions of the power coefficients resulting from: density reduction of sodium coolant due to temperature; displacement of sodium coolant by thermal expansions of cladding, structural rods, subassembly cans, and lower and upper axial reflectors; density reductions of these steel components due to temperature; displacement of bond-sodium (if present) in gaps by differential thermal expansions of fuel and cladding; density reduction of bond-sodium (if present) in gaps due to temperature; free axial expansion of fuel if unrestricted by cladding or restricted axial expansion of fuel determined by axial expansion of cladding. Isotopic spatial contributions to the Doppler component my also be obtained. (orig.) [de

Doppler reactivity uncertainties and their effect upon a hypothetical LOF accident

International Nuclear Information System (INIS)

Malloy, D.J.

1976-01-01

The statistical uncertainties and the major methodological errors which contribute to the Doppler feedback uncertainty were reviewed and investigated. Improved estimates for the magnitudes of each type of uncertainty were established. The generally applied reactivity feedback methodology has been extended by explicitly treating the coupling effect which exists between the various feedback components. The improved methodology was specifically applied to the coupling of Doppler and sodium void reactivities. In addition, the description of the temperature dependence of the Doppler feedback has been improved by the use of a two-constant formula on a global and regional basis. Feedback and coupling coefficients are presented as a first comparison of the improved and the currently applied methods. Further, the energy release which results from hypothetical disassembly accidents was simulated with a special response surface in the parametric safety evaluation code PARSEC. The impact of the improved feedback methodology and of Doppler coefficient uncertainties was illustrated by the usual parametric relationship between available work-energy and the Doppler coefficient. The work-energy was calculated with the VENUS-II disassembly code and was represented as a response surface in PARSEC. Additionally, the probability distribution for available work-energy, which results from the statistical uncertainty of the Doppler coefficient, was calculated for the current and the improved feedback methodology. The improved feedback description yielded about a 16 percent higher average value for the work-energy. A substantially larger increase is found on the high-yield end of the spectrum: the probability for work-energy above 500 MJ was increased by about a factor of ten

Power feedback effects in the LEM code

International Nuclear Information System (INIS)

Kromar, M.

1999-01-01

The nodal diffusion code LEM has been extended with the power feedback option. Thermohydraulic and neutronic coupling is covered with the Reactivity Coefficient Method. Presented are results of the code testing. Verification is done on the typical non-uprated NPP Krsko reload cycles. Results show that the code fulfill objectives arising in the process of reactor core analysis.(author)

Analysis of pressurized water reactor accidents in reactivity disturbances. II

International Nuclear Information System (INIS)

Tinka, I.

1978-01-01

The logic structure of program FATRAP is described. The time course of reactivity temporal and spatial distributions of neutron flux density and power, characteristic temperatures of the individual reactor zones and the heat flux density from cladding to the coolant can be obtained as the main results. The basic program funcitons were tested for a point and a one-dimensional model. In the basic test the absorption rod was removed uncontrollably at a preset speed for 0.5 s with the reactivity feedback operative. A second test simulated the action of the accident protection system with a delay of 0.1 s started when the 7500 MW power had been obtained. The last test consisted in simulating a start-up accident with an initial power of 2.25 MW. For the said chosen accident models reactivity feedback is responsible for the formation of the appropriate power peak while the accident protection attendance alone can considerably reduce temperatures during the process. (J.F.)

Auditory feedback blocks memory benefits of cueing during sleep.

Science.gov (United States)

Schreiner, Thomas; Lehmann, Mick; Rasch, Björn

2015-10-28

It is now widely accepted that re-exposure to memory cues during sleep reactivates memories and can improve later recall. However, the underlying mechanisms are still unknown. As reactivation during wakefulness renders memories sensitive to updating, it remains an intriguing question whether reactivated memories during sleep also become susceptible to incorporating further information after the cue. Here we show that the memory benefits of cueing Dutch vocabulary during sleep are in fact completely blocked when memory cues are directly followed by either correct or conflicting auditory feedback, or a pure tone. In addition, immediate (but not delayed) auditory stimulation abolishes the characteristic increases in oscillatory theta and spindle activity typically associated with successful reactivation during sleep as revealed by high-density electroencephalography. We conclude that plastic processes associated with theta and spindle oscillations occurring during a sensitive period immediately after the cue are necessary for stabilizing reactivated memory traces during sleep.

Reactive transport in a partially molten system with binary solid solution

Science.gov (United States)

Jordan, J.; Hesse, M. A.

2017-12-01

Melt extraction from the Earth's mantle through high-porosity channels is required to explain the composition of the oceanic crust. Feedbacks from reactive melt transport are thought to localize melt into a network of high-porosity channels. Recent studies invoke lithological heterogeneities in the Earth's mantle to seed the localization of partial melts. Therefore, it is necessary to understand the reaction fronts that form as melt flows across the lithological interface of a heterogeneity and the background mantle. Simplified melting models of such systems aide in the interpretation and formulation of larger scale mantle models. Motivated by the aforementioned facts, we present a chromatographic analysis of reactive melt transport across lithological boundaries, using theory for hyperbolic conservation laws. This is an extension of well-known linear trace element chromatography to the coupling of major elements and energy transport. Our analysis allows the prediction of the feedbacks that arise in reactive melt transport due to melting, freezing, dissolution and precipitation for frontal reactions. This study considers the simplified case of a rigid, partially molten porous medium with binary solid solution. As melt traverses a lithological contact-modeled as a Riemann problem-a rich set of features arise, including a reacted zone between an advancing reaction front and partial chemical preservation of the initial contact. Reactive instabilities observed in this study originate at the lithological interface rather than along a chemical gradient as in most studies of mantle dynamics. We present a regime diagram that predicts where reaction fronts become unstable, thereby allowing melt localization into high-porosity channels through reactive instabilities. After constructing the regime diagram, we test the one-dimensional hyperbolic theory against two-dimensional numerical experiments. The one-dimensional hyperbolic theory is sufficient for predicting the

Competition between reaction-induced expansion and creep compaction during gypsum formation: Experimental and numerical investigation

Science.gov (United States)

Skarbek, R. M.; Savage, H. M.; Spiegelman, M. W.; Kelemen, P. B.; Yancopoulos, D.

2017-12-01

Deformation and cracking caused by reaction-driven volume increase is an important process in many geological settings, however the conditions controlling these processes are poorly understood. The interaction of rocks with reactive fluids can change permeability and reactive surface area, leading to a large variety of feedbacks. Gypsum is an ideal material to study these processes. It forms rapidly at room temperature via bassanite hydration, and is commonly used as an analogue for rocks in high-temperature, high-pressure conditions. We conducted uniaxial strain experiments to study the effects of applied axial load on deformation and fluid flow during the formation of gypsum from bassanite. While hydration of bassanite to gypsum involves a solid volume increase, gypsum exhibits significant creep compaction when in contact with water. These two volume changing processes occur simultaneously during fluid flow through bassanite. We cold-pressed bassanite powder to form cylinders 2.5 cm in height and 1.2 cm in diameter. Samples were compressed with a static axial load of 0.01 to 4 MPa. Water infiltrated initially unsaturated samples through the bottom face and the height of the samples was recorded as a measure of the total volume change. We also performed experiments on pure gypsum samples to constrain the amount of creep observed in tests on bassanite hydration. At axial loads 1 MPa, creep in the gypsum dominates and samples exhibit monotonic compaction. At intermediate loads, samples exhibit alternating phases of compaction and expansion due to the interplay of the two volume changing processes. We observed a change from net compaction to net expansion at an axial load of 0.250 MPa. We explain this behavior with a simple model that predicts the strain evolution, but does not take fluid flow into account. We also implement a 1D poro-visco-elastic model of the imbibition process that includes the reaction and gypsum creep. We use the results of these models, with

Time constants and feedback transfer functions of EBR-II subassembly types

International Nuclear Information System (INIS)

Grimm, K.N.; Meneghetti, D.

1986-01-01

Time constants, feedback reactivity transfer functions and power coefficients are calculated for stereotypical subassemblies in the EBR-II reactor. These quantities are calculated from nodal reactivities obtained from a reactor kinetic code analysis for a step change in power. Due to the multiplicity of eigenvalues, there are several time constants for each nodal position in a subassembly. Compared with these calculated values are analytically derived values for the initial node of a given channel

Time constants and feedback transfer functions of EBR-II subassembly types

International Nuclear Information System (INIS)

Grimm, K.N.; Meneghetti, D.

1987-01-01

Time constants, feedback reactivity transfer functions and power coefficients are calculated for stereotypical subassemblies in the EBR-II reactor. These quantities are calculated from nodal reactivities obtained from a reactor kinetic code analysis for a step change in power. Due to the multiplicity of eigenvalues, there are several time constants for each nodal position in a subassembly. Compared with these calculated values are analytically derived values for the initial node of a given channel. (author)

Heat Pipe Reactor Dynamic Response Tests: SAFE-100 Reactor Core Prototype

Science.gov (United States)

Bragg-Sitton, Shannon M.

2005-01-01

The SAFE-I00a test article at the NASA Marshall Space Flight Center was used to simulate a variety of potential reactor transients; the SAFEl00a is a resistively heated, stainless-steel heat-pipe (HP)-reactor core segment, coupled to a gas-flow heat exchanger (HX). For these transients the core power was controlled by a point kinetics model with reactivity feedback based on core average temperature; the neutron generation time and the temperature feedback coefficient are provided as model inputs. This type of non-nuclear test is expected to provide reasonable approximation of reactor transient behavior because reactivity feedback is very simple in a compact fast reactor (simple, negative, and relatively monotonic temperature feedback, caused mostly by thermal expansion) and calculations show there are no significant reactivity effects associated with fluid in the HP (the worth of the entire inventory of Na in the core is .tests, the point kinetics model was based on core thermal expansion via deflection measurements. It was found that core deflection was a strung function of how the SAFE-100 modules were fabricated and assembled (in terms of straightness, gaps, and other tolerances). To remove the added variable of how this particular core expands as compared to a different concept, it was decided to use a temperature based feedback model (based on several thermocouples placed throughout the core).

Simulation of transients with space-dependent feedback by coarse mesh flux expansion method

International Nuclear Information System (INIS)

Langenbuch, S.; Maurer, W.; Werner, W.

1975-01-01

For the simulation of the time-dependent behaviour of large LWR-cores, even the most efficient Finite-Difference (FD) methods require a prohibitive amount of computing time in order to achieve results of acceptable accuracy. Static CM-solutions computed with a mesh-size corresponding to the fuel element structure (about 20 cm) are at least as accurate as FD-solutions computed with about 5 cm mesh-size. For 3d-calculations this results in a reduction of storage requirements by a factor 60 and of computing costs by a factor 40, relative to FD-methods. These results have been obtained for pure neutronic calculations, where feedback is not taken into account. In this paper it is demonstrated that the method retains its accuracy also in kinetic calculations, even in the presence of strong space dependent feedback. (orig./RW) [de

Identification of fast power reactivity effect in nuclear power reactor

International Nuclear Information System (INIS)

Efanov, A.I.; Kaminskas, V.A.; Lavrukhin, V.S.; Rimidis, A.P.; Yanitskene, D.Yu.

1987-01-01

A nuclear power reactor is an object of control with distributed parameters, characteristics of which vary during operation time. At the same time the reactor as the object of control has internal feedback circuits, which are formed as a result of the effects of fuel parameters and a coolant (pressure, temperature, steam content) on the reactor breeding properties. The problem of internal feedback circuit identification in a nuclear power reactor is considered. Conditions for a point reactor identification are obtained and algorithms of parametric identification are constructed. Examples of identification of fast power reactivity effect for the RBMK-1000 reactor are given. Results of experimental testing have shown that the developed method of fast power reactivity effect identification permits according to the data of normal operation to construct adaptive models for the point nuclear reactor, designed for its behaviour prediction in stationary and transition operational conditions. Therefore, the models considered can be used for creating control systems of nuclear power reactor thermal capacity (of RBMK type reactor, in particular) which can be adapted to the change in the internal feedback circuit characteristics

An autonomous organic reaction search engine for chemical reactivity

Science.gov (United States)

Dragone, Vincenza; Sans, Victor; Henson, Alon B.; Granda, Jaroslaw M.; Cronin, Leroy

2017-06-01

The exploration of chemical space for new reactivity, reactions and molecules is limited by the need for separate work-up-separation steps searching for molecules rather than reactivity. Herein we present a system that can autonomously evaluate chemical reactivity within a network of 64 possible reaction combinations and aims for new reactivity, rather than a predefined set of targets. The robotic system combines chemical handling, in-line spectroscopy and real-time feedback and analysis with an algorithm that is able to distinguish and select the most reactive pathways, generating a reaction selection index (RSI) without need for separate work-up or purification steps. This allows the automatic navigation of a chemical network, leading to previously unreported molecules while needing only to do a fraction of the total possible reactions without any prior knowledge of the chemistry. We show the RSI correlates with reactivity and is able to search chemical space using the most reactive pathways.

Evaluation of Term Ranking Algorithms for Pseudo-Relevance Feedback in MEDLINE Retrieval.

Science.gov (United States)

Yoo, Sooyoung; Choi, Jinwook

2011-06-01

The purpose of this study was to investigate the effects of query expansion algorithms for MEDLINE retrieval within a pseudo-relevance feedback framework. A number of query expansion algorithms were tested using various term ranking formulas, focusing on query expansion based on pseudo-relevance feedback. The OHSUMED test collection, which is a subset of the MEDLINE database, was used as a test corpus. Various ranking algorithms were tested in combination with different term re-weighting algorithms. Our comprehensive evaluation showed that the local context analysis ranking algorithm, when used in combination with one of the reweighting algorithms - Rocchio, the probabilistic model, and our variants - significantly outperformed other algorithm combinations by up to 12% (paired t-test; p algorithm pairs, at least in the context of the OHSUMED corpus. Comparative experiments on term ranking algorithms were performed in the context of a subset of MEDLINE documents. With medical documents, local context analysis, which uses co-occurrence with all query terms, significantly outperformed various term ranking methods based on both frequency and distribution analyses. Furthermore, the results of the experiments demonstrated that the term rank-based re-weighting method contributed to a remarkable improvement in mean average precision.

Role of FFTF in assessing structural feedbacks and inherent safety of LMR's

International Nuclear Information System (INIS)

Padilla, A.; Omberg, R.P.; O'Dell, L.D.; Harris, R.A.; Nguyen, D.H.; Waltar, A.E.

1985-03-01

The possibility of developing reactor designs with inherent safety characteristics sufficient to provide ''walk away'' safety is receiving additional emphasis in the LMR program. A key element in this effort is the recognition that LMR's possess safety characteristics above and beyond those employed in past safety review processes. Some of these additional safety characteristics are due to reactivity feedback effects caused by small structural movements during hypothetical severe design transients. The effect of these characteristics upon the behavior of the FFTF under such transients has been assessed and is discussed in this paper. The paper also presents a preliminary test matrix which might allow experimental verification of the structural reactivity feedback effects. Such experimental verification should be very useful to innovative designers seeking to optimize inherent safety. 8 refs., 1 fig., 2 tabs

Detonative propagation and accelerative expansion of the Crab Nebula shock front.

Science.gov (United States)

Gao, Yang; Law, Chung K

2011-10-21

The accelerative expansion of the Crab Nebula's outer envelope is a mystery in dynamics, as a conventional expanding blast wave decelerates when bumping into the surrounding interstellar medium. Here we show that the strong relativistic pulsar wind bumping into its surrounding nebula induces energy-generating processes and initiates a detonation wave that propagates outward to form the current outer edge, namely, the shock front, of the nebula. The resulting detonation wave, with a reactive downstream, then provides the needed power to maintain propagation of the shock front. Furthermore, relaxation of the curvature-induced reduction of the propagation velocity from the initial state of formation to the asymptotic, planar state of Chapman-Jouguet propagation explains the observed accelerative expansion. Potential richness in incorporating reactive fronts in the description of various astronomical phenomena is expected. © 2011 American Physical Society

An accurate reactive power control study in virtual flux droop control

Science.gov (United States)

Wang, Aimeng; Zhang, Jia

2017-12-01

This paper investigates the problem of reactive power sharing based on virtual flux droop method. Firstly, flux droop control method is derived, where complicated multiple feedback loops and parameter regulation are avoided. Then, the reasons for inaccurate reactive power sharing are theoretically analyzed. Further, a novel reactive power control scheme is proposed which consists of three parts: compensation control, voltage recovery control and flux droop control. Finally, the proposed reactive power control strategy is verified in a simplified microgrid model with two parallel DGs. The simulation results show that the proposed control scheme can achieve accurate reactive power sharing and zero deviation of voltage. Meanwhile, it has some advantages of simple control and excellent dynamic and static performance.

Simulation of instabilities in the presence of beam feedback

International Nuclear Information System (INIS)

Myers, S.; Vancraeynest, J.

1985-01-01

The effect of longitudinal and transverse instabilities in electron storage rings is simulated by tracking many superparticles for many turns through a model of a machine lattice. This lattice model is defined by a series of machine elements such as RF stations (including longitudinal and transverse wake fields), beam pick-ups, feedback kicker magnets, etc. The machine elements may be interconnected in any specified way so as to produce for example feedback on the longitudinal or transverse beam motion. Each superparticle is treated in six-dimensional phase space and the effects of quantum excitation and radiation damping are included. Insofar as possible the program has been structured to allow study of all known single-beam effects (such as synchro-betatron resonances, transverse mode coupling etc.) in the presence or the absence of some form of beam feedback. The primary goal of the program was to study the effect of a reactive beam feedback system on the threshold for transverse mode coupling. (orig.)

Development of a faulty reactivity detection system applying a digital H∞ estimator

International Nuclear Information System (INIS)

Suzuki, Katsuo; Suzudo, Tomoaki; Nabeshima, Kunihiko

2004-01-01

This paper concerns an application of digital optimal H ∞ estimator to the detection of faulty reactivity in real-time. The detection system, fundamentally based on the reactivity balance method, is composed of three modules, i.e. the net reactivity estimator, the feedback reactivity estimator and the reactivity balance circuit. H ∞ optimal filters are used for these two reactivity estimators, and the nonlinear neutronics are taken into consideration especially for the design of the net reactivity estimator. A series of performance test of the detection system are conducted by using numerical simulations of reactor dynamics with the insertion of a faulty reactivity for an experimental fast breeder reactor JOYO. The system detects the typical artificial reactivity insertions during a few seconds with no stationary offset and the accuracy of 0.1 cent, and is satisfactory for its practical use. (author)

Super safe small reactor RAPID-L conceptual design and R and D. JAERI's nuclear research promotion program, H11-002 (Contract research)

International Nuclear Information System (INIS)

Kambe, Mitsuru; Tsunoda, Hirokazu; Mishima, Kaichiro; Kawasaki, Akira; Iwamura, Takamichi

2003-03-01

The 200 kWe uranium nitride fueled lithium cooled fast reactor 'RAPID-L' combined with thermoelectric power conversion system that can be operated unmanned without refueling for up to ten years has been demonstrated. The RAPID refueling concept enables quick and simplified refueling, and achieves plant design lifetime over 20 years. A significant advantage of the RAPID-L design, which does not require the use of control rods - is the introduction of the innovative reactivity control systems: lithium expansion module (LEM), lithium injection module (LIM) and lithium release module (LRM). LEM is the most promising candidate for improving inherent reactivity feedback. LEMs could realize burnup compensation. LIMs assure sufficient negative reactivity feedback in unprotected transients. LRMs enable an automated reactor startup by detecting the hot standby temperature of the primary coolant. All these systems use 6 Li as liquid poison and are actuated by highly reliable physical properties (volume expansion of 6 Li for LEM, and freeze seal melting for LIM and LRM). (author)

Strength of forest-albedo feedback in mid-Holocene climate simulations

Directory of Open Access Journals (Sweden)

J. Otto

2011-09-01

Full Text Available Reconstructions of the mid-Holocene climate, 6000 years before present, suggest that spring temperatures were higher at high northern latitudes compared to the pre-industrial period. A positive feedback between expansion of forest and climate presumably contributed to this warming. In the presence of snow, forests have a lower albedo than grass land. Therefore, the expansion of forest likely favoured a warming in spring, counteracting the lower insolation at the mid-Holocene.

We investigate the sensitivity of the vegetation-atmosphere interaction under mid-Holocene orbital forcing with respect to the strength of the forest-albedo feedback by using a comprehensive coupled atmosphere-vegetation model (ECHAM5/JSBACH. We perform two sets of model simulations: a first set of simulations with a relatively weak reduction of albedo of snow by forest; and a second set of simulations with a relatively strong reduction of the albedo of snow by forest.

We show that the parameterisation of the albedo of snow leads to uncertainties in the temperature signal. Compared to the set with weak snow masking, the simulations with strong snow masking reveal a spring warming that is three times higher, by 0.34 °C north of 60° N. This warming is related to a forest expansion of only 13%.

Exploring the conformational and reactive dynamics of biomolecules in solution using an extended version of the glycine reactive force field

DEFF Research Database (Denmark)

Monti, Susanna; Corozzi, Alessandro; Fristrup, Peter

2013-01-01

In order to describe possible reaction mechanisms involving amino acids, and the evolution of the protonation state of amino acid side chains in solution, a reactive force field (ReaxFF-based description) for peptide and protein simulations has been developed as an expansion of the previously rep...

Accuracy and speed feedback: Global and local effects on strategy use

Science.gov (United States)

Touron, Dayna R.; Hertzog, Christopher

2013-01-01

Background Skill acquisition often involves a shift from an effortful algorithm-based strategy to more fluent memory-based performance. Older adults’ slower strategy transitions can be ascribed to both slowed learning and metacognitive factors. Experimenters often provide feedback on response accuracy; this emphasis may either inadvertently reinforce older adults’ conservatism or might highlight that retrieval is generally quite accurate. RT feedback can lead to more rapid shift to retrieval (Hertzog, Touron, & Hines, 2007). Methods This study parametrically varied trial-by-trial feedback to examine whether strategy shifts in the noun-pair task in younger (M = 19) and older adults (M = 67) were influenced by type of performance feedback: none, trial accuracy, trial RT, or both accuracy and RT. Results Older adults who received accuracy feedback retrieved more often, particularly on difficult rearranged trials, and participants who receive speed feedback performed the scanning strategy more quickly. Age differences were also obtained in local (trial-level) reactivity to task performance, but these were not affected by feedback. Conclusions Accuracy and speed feedback had distinct global (general) influences on task strategies and performance. In particular, it appears that the standard practice of providing trial-by-trial accuracy feedback might facilitate older adults’ use of retrieval strategies in skill acquisition tasks. PMID:24785594

The expansion of electric power systems considering the operation reliability; Expansion de sistemas electricos considerando la securidad de servicio

Energy Technology Data Exchange (ETDEWEB)

Cortes, Marcelo A. [Universidad de Antofagasta (Chile). Dept. de Ingenieria Electrica; Moya A, Oscar [Chile Univ., Santiago (Chile). Dept. de Ingenieria Civil

1997-12-31

This publication describes a procedure based in an linear programming for the planning of the expansion of mediating term in power systems. The implicit alternatives for network expansion, whether power plants or transmission lines, are classified according to indexes of reinforcement. The indexes are gotten resulting shadow pricing upon resolving a problem of minimum cost of operation and outage. The network is subjected to the most probable contingencies and from these outputs the expected reinforcement results are obtained. The problem of the reactive power accounts for restrictions in line capacity and prior evaluation of A C power flux. Results obtained are used for methodology validation. (author) 12 refs., 1 fig., 3 tabs.; e-mail: mcortes at apolo.cc.uantof.cl.; osmoya at tamarugo.cec.uchile.cl

An efficient technique for the point reactor kinetics equations with Newtonian temperature feedback effects

International Nuclear Information System (INIS)

Nahla, Abdallah A.

2011-01-01

Highlights: → An efficient technique for the nonlinear reactor kinetics equations is presented. → This method is based on Backward Euler or Crank Nicholson and fundamental matrix. → Stability of efficient technique is defined and discussed. → This method is applied to point kinetics equations of six-groups of delayed neutrons. → Step, ramp, sinusoidal and temperature feedback reactivities are discussed. - Abstract: The point reactor kinetics equations of multi-group of delayed neutrons in the presence Newtonian temperature feedback effects are a system of stiff nonlinear ordinary differential equations which have not any exact analytical solution. The efficient technique for this nonlinear system is based on changing this nonlinear system to a linear system by the predicted value of reactivity and solving this linear system using the fundamental matrix of the homogenous linear differential equations. The nonlinear point reactor kinetics equations are rewritten in the matrix form. The solution of this matrix form is introduced. This solution contains the exponential function of a variable coefficient matrix. This coefficient matrix contains the unknown variable, reactivity. The predicted values of reactivity in the explicit form are determined replacing the exponential function of the coefficient matrix by two kinds, Backward Euler and Crank Nicholson, of the rational approximations. The nonlinear point kinetics equations changed to a linear system of the homogenous differential equations. The fundamental matrix of this linear system is calculated using the eigenvalues and the corresponding eigenvectors of the coefficient matrix. Stability of the efficient technique is defined and discussed. The efficient technique is applied to the point kinetics equations of six-groups of delayed neutrons with step, ramp, sinusoidal and the temperature feedback reactivities. The results of these efficient techniques are compared with the traditional methods.

Feedforward and feedback motor control abnormalities implicate cerebellar dysfunctions in autism spectrum disorder.

Science.gov (United States)

Mosconi, Matthew W; Mohanty, Suman; Greene, Rachel K; Cook, Edwin H; Vaillancourt, David E; Sweeney, John A

2015-02-04

Sensorimotor abnormalities are common in autism spectrum disorder (ASD) and among the earliest manifestations of the disorder. They have been studied far less than the social-communication and cognitive deficits that define ASD, but a mechanistic understanding of sensorimotor abnormalities in ASD may provide key insights into the neural underpinnings of the disorder. In this human study, we examined rapid, precision grip force contractions to determine whether feedforward mechanisms supporting initial motor output before sensory feedback can be processed are disrupted in ASD. Sustained force contractions also were examined to determine whether reactive adjustments to ongoing motor behavior based on visual feedback are altered. Sustained force was studied across multiple force levels and visual gains to assess motor and visuomotor mechanisms, respectively. Primary force contractions of individuals with ASD showed greater peak rate of force increases and large transient overshoots. Individuals with ASD also showed increased sustained force variability that scaled with force level and was more severe when visual gain was highly amplified or highly degraded. When sustaining a constant force level, their reactive adjustments were more periodic than controls, and they showed increased reliance on slower feedback mechanisms. Feedforward and feedback mechanism alterations each were associated with more severe social-communication impairments in ASD. These findings implicate anterior cerebellar circuits involved in feedforward motor control and posterior cerebellar circuits involved in transforming visual feedback into precise motor adjustments in ASD. Copyright © 2015 the authors 0270-6474/15/352015-11$15.00/0.

Computation of point reactor dynamics equations with thermal feedback via weighted residue method

International Nuclear Information System (INIS)

Suo Changan; Liu Xiaoming

1986-01-01

Point reactor dynamics equations with six groups of delayed neutrons have been computed via weighted-residual method in which the delta function was taken as a weighting function, and the parabolic with or without exponential factor as a trial function respectively for an insertion of large or smaller reactivity. The reactivity inserted into core can be varied with time, including insertion in forms of step function, polynomials up to second power and sine function. A thermal feedback of single flow channel model was added in. The thermal equations concerned were treated by use of a backward difference technique. A WRK code has been worked out, including implementation of an automatic selection of time span based on an input of error requirement and of an automatic change between computation with large reactivity and that with smaller one. On the condition of power varied slowly and without feedback, the results are not sensitive to the selection of values of time span. At last, the comparison of relevant results has shown that the agreement is quite well

Study of IPR-R1 dynamics by reactivity random excitations

International Nuclear Information System (INIS)

Roedel, G.

1983-01-01

To demonstrate the viability of the utilization of analitical techniques of neutronic noise, a dynamic model for IPR-R1 reactor from CDTN was developed. This model allows reactivity feedback due to variations of temperature in fuel and coolant [pt

A model study of warming-induced phosphorus-oxygen feedbacks in open-ocean oxygen minimum zones on millennial timescales

Science.gov (United States)

Niemeyer, Daniela; Kemena, Tronje P.; Meissner, Katrin J.; Oschlies, Andreas

2017-05-01

Observations indicate an expansion of oxygen minimum zones (OMZs) over the past 50 years, likely related to ongoing deoxygenation caused by reduced oxygen solubility, changes in stratification and circulation, and a potential acceleration of organic matter turnover in a warming climate. The overall area of ocean sediments that are in direct contact with low-oxygen bottom waters also increases with expanding OMZs. This leads to a release of phosphorus from ocean sediments. If anthropogenic carbon dioxide emissions continue unabated, higher temperatures will cause enhanced weathering on land, which, in turn, will increase the phosphorus and alkalinity fluxes into the ocean and therefore raise the ocean's phosphorus inventory even further. A higher availability of phosphorus enhances biological production, remineralisation and oxygen consumption, and might therefore lead to further expansions of OMZs, representing a positive feedback. A negative feedback arises from the enhanced productivity-induced drawdown of carbon and also increased uptake of CO2 due to weathering-induced alkalinity input. This feedback leads to a decrease in atmospheric CO2 and weathering rates. Here, we quantify these two competing feedbacks on millennial timescales for a high CO2 emission scenario. Using the University of Victoria (UVic) Earth System Climate Model of intermediate complexity, our model results suggest that the positive benthic phosphorus release feedback has only a minor impact on the size of OMZs in the next 1000 years. The increase in the marine phosphorus inventory under assumed business-as-usual global warming conditions originates, on millennial timescales, almost exclusively (> 80 %) from the input via terrestrial weathering and causes a 4- to 5-fold expansion of the suboxic water volume in the model.

A model study of warming-induced phosphorus–oxygen feedbacks in open-ocean oxygen minimum zones on millennial timescales

Directory of Open Access Journals (Sweden)

D. Niemeyer

2017-05-01

Full Text Available Observations indicate an expansion of oxygen minimum zones (OMZs over the past 50 years, likely related to ongoing deoxygenation caused by reduced oxygen solubility, changes in stratification and circulation, and a potential acceleration of organic matter turnover in a warming climate. The overall area of ocean sediments that are in direct contact with low-oxygen bottom waters also increases with expanding OMZs. This leads to a release of phosphorus from ocean sediments. If anthropogenic carbon dioxide emissions continue unabated, higher temperatures will cause enhanced weathering on land, which, in turn, will increase the phosphorus and alkalinity fluxes into the ocean and therefore raise the ocean's phosphorus inventory even further. A higher availability of phosphorus enhances biological production, remineralisation and oxygen consumption, and might therefore lead to further expansions of OMZs, representing a positive feedback. A negative feedback arises from the enhanced productivity-induced drawdown of carbon and also increased uptake of CO2 due to weathering-induced alkalinity input. This feedback leads to a decrease in atmospheric CO2 and weathering rates. Here, we quantify these two competing feedbacks on millennial timescales for a high CO2 emission scenario. Using the University of Victoria (UVic Earth System Climate Model of intermediate complexity, our model results suggest that the positive benthic phosphorus release feedback has only a minor impact on the size of OMZs in the next 1000 years. The increase in the marine phosphorus inventory under assumed business-as-usual global warming conditions originates, on millennial timescales, almost exclusively (> 80 % from the input via terrestrial weathering and causes a 4- to 5-fold expansion of the suboxic water volume in the model.

Combined MEK and ERK inhibition overcomes therapy-mediated pathway reactivation in RAS mutant tumors.

Directory of Open Access Journals (Sweden)

Mark Merchant

Full Text Available Mitogen-activated protein kinase (MAPK pathway dysregulation is implicated in >30% of all cancers, rationalizing the development of RAF, MEK and ERK inhibitors. While BRAF and MEK inhibitors improve BRAF mutant melanoma patient outcomes, these inhibitors had limited success in other MAPK dysregulated tumors, with insufficient pathway suppression and likely pathway reactivation. In this study we show that inhibition of either MEK or ERK alone only transiently inhibits the MAPK pathway due to feedback reactivation. Simultaneous targeting of both MEK and ERK nodes results in deeper and more durable suppression of MAPK signaling that is not achievable with any dose of single agent, in tumors where feedback reactivation occurs. Strikingly, combined MEK and ERK inhibition is synergistic in RAS mutant models but only additive in BRAF mutant models where the RAF complex is dissociated from RAS and thus feedback productivity is disabled. We discovered that pathway reactivation in RAS mutant models occurs at the level of CRAF with combination treatment resulting in a markedly more active pool of CRAF. However, distinct from single node targeting, combining MEK and ERK inhibitor treatment effectively blocks the downstream signaling as assessed by transcriptional signatures and phospho-p90RSK. Importantly, these data reveal that MAPK pathway inhibitors whose activity is attenuated due to feedback reactivation can be rescued with sufficient inhibition by using a combination of MEK and ERK inhibitors. The MEK and ERK combination significantly suppresses MAPK pathway output and tumor growth in vivo to a greater extent than the maximum tolerated doses of single agents, and results in improved anti-tumor activity in multiple xenografts as well as in two Kras mutant genetically engineered mouse (GEM models. Collectively, these data demonstrate that combined MEK and ERK inhibition is functionally unique, yielding greater than additive anti-tumor effects and

Effects of feedback reliability on feedback-related brain activity: A feedback valuation account.

Science.gov (United States)

Ernst, Benjamin; Steinhauser, Marco

2018-04-06

Adaptive decision making relies on learning from feedback. Because feedback sometimes can be misleading, optimal learning requires that knowledge about the feedback's reliability be utilized to adjust feedback processing. Although previous research has shown that feedback reliability indeed influences feedback processing, the underlying mechanisms through which this is accomplished remain unclear. Here we propose that feedback processing is adjusted by the adaptive, top-down valuation of feedback. We assume that unreliable feedback is devalued relative to reliable feedback, thus reducing the reward prediction errors that underlie feedback-related brain activity and learning. A crucial prediction of this account is that the effects of feedback reliability are susceptible to contrast effects. That is, the effects of feedback reliability should be enhanced when both reliable and unreliable feedback are experienced within the same context, as compared to when only one level of feedback reliability is experienced. To evaluate this prediction, we measured the event-related potentials elicited by feedback in two experiments in which feedback reliability was varied either within or between blocks. We found that the fronto-central valence effect, a correlate of reward prediction errors during reinforcement learning, was reduced for unreliable feedback. But this result was obtained only when feedback reliability was varied within blocks, thus indicating a contrast effect. This suggests that the adaptive valuation of feedback is one mechanism underlying the effects of feedback reliability on feedback processing.

Reactivity anomalies in the FFTF [Fast Flux Test Facility

International Nuclear Information System (INIS)

Knutson, B.J.; Harris, R.A.

1987-04-01

Experience using an automated core reactivity monitoring technique at the Fast Flux Test Facility (FFTF) through eight operating cycles is described. This technique relies on comparing predicted to measured rod positions to detect any anomalous (or unpredicted) core reactivity changes. Reactivity worth predictions of core state changes (e.g., temperature and irradiation changes) and compensating control rod movements are required for the rod position comparison. A substantial data base now exists to evaluate changes in temperature reactivity feedback effects operational in the FFTF, rod worth changes due to core loading, temperature and irradiation effects and burnup effects associated with transmutation of fuel materials. This report summarizes preliminary work of correlating zero power and at-power rod worth measurement data, calculated burnup rates and rod worths using the latest ENDF/B-V cross section set for each cycle to evaluate the prediction models and attempt to resolve observed reactivity anomalies. 2 figs., 2 tabs

Reactivity insertion accident analysis

International Nuclear Information System (INIS)

Moreira, J.M.L.; Nakata, H.; Yorihaz, H.

1990-04-01

The correct prediction of postulated accidents is the fundamental requirement for the reactor licensing procedures. Accident sequences and severity of their consequences depend upon the analysis which rely on analytical tools which must be validated against known experimental results. Present work presents a systematic approach to analyse and estimate the reactivity insertion accident sequences. The methodology is based on the CINETHICA code which solves the point-kinetics/thermohydraulic coupled equations with weighted temperature feedback. Comparison against SPERT experimental results shows good agreement for the step insertion accidents. (author) [pt

Effect of nonlinear void reactivity on bifurcation characteristics of a lumped-parameter model of a BWR: A study relevant to RBMK

Energy Technology Data Exchange (ETDEWEB)

Verma, Dinkar, E-mail: dinkar@iitk.ac.in [Nuclear Engineering and Technology Program, Indian Institute of Technology Kanpur, Kanpur 208 016 (India); Kalra, Manjeet Singh, E-mail: drmanjeet.singh@dituniversity.edu.in [DIT University, Dehradun 248 009 (India); Wahi, Pankaj, E-mail: wahi@iitk.ac.in [Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur 208 016 (India)

2017-04-15

Highlights: • A simplified model with nonlinear void reactivity feedback is studied. • Method of multiple scales for nonlinear analysis and oscillation characteristics. • Second order void reactivity dominates in determining system dynamics. • Opposing signs of linear and quadratic void reactivity enhances global safety. - Abstract: In the present work, the effect of nonlinear void reactivity on the dynamics of a simplified lumped-parameter model for a boiling water reactor (BWR) is investigated. A mathematical model of five differential equations comprising of neutronics and thermal-hydraulics encompassing the nonlinearities associated with both the reactivity feedbacks and the heat transfer process has been used. To this end, we have considered parameters relevant to RBMK for which the void reactivity is known to be nonlinear. A nonlinear analysis of the model exploiting the method of multiple time scales (MMTS) predicts the occurrence of the two types of Hopf bifurcation, namely subcritical and supercritical, leading to the evolution of limit cycles for a range of parameters. Numerical simulations have been performed to verify the analytical results obtained by MMTS. The study shows that the nonlinear reactivity has a significant influence on the system dynamics. A parametric study with varying nominal reactor power and operating conditions in coolant channel has also been performed which shows the effect of change in concerned parameter on the boundary between regions of sub- and super-critical Hopf bifurcations in the space constituted by the two coefficients of reactivities viz. the void and the Doppler coefficient of reactivities. In particular, we find that introduction of a negative quadratic term in the void reactivity feedback significantly increases the supercritical region and dominates in determining the system dynamics.

Estimation of dynamic reactivity using an H∞ optimal filter with a nonlinear term

International Nuclear Information System (INIS)

Suzuki, Katsuo; Watanabe, Koiti

1996-01-01

A method of nonlinear filtering is applied to the problem of estimating the dynamic reactivity of a nonlinear reactor system. The nonlinear filtering algorithm developed is a simple modification of a linear H ∞ optimal filter with a nonlinear feedback loop added. The linear filter is designed on the basis of a linearized dynamical system model that consists of linearized point reactor kinetic equations and a reactivity state equation driven by a fictitious signal. The latter is artificially introduced to deal with the reactivity as a state variable. The results of the computer simulation show that the nonlinear filtering algorithm can be applied to estimate the dynamic reactivity of the nonlinear reactor system, even under relatively large reactivity disturbances

Assessment of reactivity devices for CANDU-6 with DUPIC fuel

International Nuclear Information System (INIS)

Jeong, Chang Joon; Choi, Hang Bok

1998-01-01

Reactivity device characteristics for a CANDU-6 reactor loaded with DUPIC fuel have been assessed. A transport code WIMS-AECL and a three-dimensional diffusion code RFSP were used for the lattice parameter generation and the core calculation, respectively. Three major reactivity devices have been assessed for their inherent functions. For the zone controller system, damping capability for spatial oscillation was investigated. The restart capability of the adjuster system was investigated. The shim operation and power stepback calculation were also performed to confirm the compatibility of the current adjuster rod system. The mechanical control absorber was assessed for the capability to compensate the temperature reactivity feedback following a power reduction. This study has shown that the current reactivity device systems retain their functions when used in a DUPIC fuel CANDU reactor

Derivation and experimental demonstration of the perturbed reactivity method for the determination of subcriticality

International Nuclear Information System (INIS)

Kwok, K.S.; Bernard, J.A.; Lanning, D.D.

1992-01-01

The perturbed reactivity method is a general technique for the estimation of reactivity. It is particularly suited to the determination of a reactor's initial degree of subcriticality and was developed to facilitate the automated startup of both spacecraft and multi-modular reactors using model-based control laws. It entails perturbing a shutdown reactor by the insertion of reactivity at a known rate and then estimating the initial degree of subcriticality from observation of the resulting reactor period. While similar to inverse kinetics, the perturbed reactivity method differs in that the net reactivity present in the core is treated as two separate entities. The first is that associated with the known perturbation. This quantity, together with the observed period and the reactor's describing parameters, are the inputs to the method's implementing algorithm. The second entity, which is the algorithm;s output, is the sum of all other reactivities including those resulting from inherent feedback and the initial degree of subcriticality. During an automated startup, feedback effects will be minimal. Hence, when applied to a shutdown reactor, the output of the perturbed reactivity method will be a constant that is equal to the initial degree of subcriticality. This is a major advantage because repeated estimates can be made of this one quantity and signal smoothing techniques can be applied to enhance accuracy. In addition to describing the theoretical basis for the perturbed reactivity method, factors involved in its implementation such as the movement of control devices other than those used to create the perturbation, source estimation, and techniques for data smoothing are presented

Plant dynamics analyses of fast reactor concept: RAPID-A without any control rod

International Nuclear Information System (INIS)

Kambe, Mitsuru

1996-01-01

Plant dynamics analyses of a fast reactor concept RAPID-A without any control rod have been demonstrated in case of reactor startup and sudden change of the primary flow rate. RAIP-A concept involves Lithium Expansion Module (LEM) for inherent reactivity feedback, Lithium Injection Module (LIM) for inherent ultimate shutdown and Lithium Release Module (LRM) for automated reactor startup. LEM consists of Quick-LEM and Slow-LEM. Slow-LEM provides with moderate reactivity addition as decreasing temperature. Quick-LEM assures quick negative reactivity feedback as increasing temperature. Plant dynamics analyses revealed that reactor power is nearly proportional to the primary flow rate even if the flow rate increases suddenly. Fully automated reactor startup from the subcritical condition has been attempted by inserting reactivity at a constant rate by LRM. Allowable rate of reactivity addition has been obtained in respect to Quick-LEM reactivity worth. (author)

Time constants and feedback transfer functions of EBR-II [Experimental Breeder Reactor] subassembly types

International Nuclear Information System (INIS)

Grimm, K.N.; Meneghetti, D.

1986-09-01

Time constants, feedback reactivity transfer functions and power coefficients are calculated for stereotypical subassemblies in the EBR-II reactor. These quantities are calculated from nodal reactivities obtained from a reactor kinetic code analysis for a step change in power. Due to the multiplicity of eigenvalues, there are several time constants for each nodal position in a subassembly. Compared with these calculated values are analytically derived values for the initial node of a given channel

Influence of external source location in the reactivity calculation

International Nuclear Information System (INIS)

Silva, Adilson Costa da; Silva, Fernando Carvalho da; Martinez, Aquilino Senra

2011-01-01

We used the neutron diffusion equation with external neutron sources, in cartesian geometry and the two groups of energy, to verify the influence of external neutron source locations in the reactivity calculation. For this, a coarse mesh finite difference method was developed for the adjoint flux calculation and simplifies reactivity calculation in PWR type reactor, which uses the output of the nodal expansion method. The results were obtained for different locations on the two-dimensional plane, as well as for different types of fuel elements in the reactor core. (author)

Influence of external source location in the reactivity calculation

Energy Technology Data Exchange (ETDEWEB)

Silva, Adilson Costa da; Silva, Fernando Carvalho da; Martinez, Aquilino Senra, E-mail: asilva@con.ufrj.b, E-mail: fernando@con.ufrj.b, E-mail: Aquilino@lmp.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (PEN/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

2011-07-01

We used the neutron diffusion equation with external neutron sources, in cartesian geometry and the two groups of energy, to verify the influence of external neutron source locations in the reactivity calculation. For this, a coarse mesh finite difference method was developed for the adjoint flux calculation and simplifies reactivity calculation in PWR type reactor, which uses the output of the nodal expansion method. The results were obtained for different locations on the two-dimensional plane, as well as for different types of fuel elements in the reactor core. (author)

Temperature feedback of TRIGA MARK-II fuel

Science.gov (United States)

Usang, M. D.; Minhat, M. S.; Rabir, M. H.; M. Rawi M., Z.

2016-01-01

We study the amount of temperature feedback on reactivity for the three types of TRIGA fuel i.. ST8, ST12 and LEU fuel, are used in the TRIGA MARK II reactor in Malaysia Nuclear Agency. We employ WIMSD-5B for the calculation of kin f for a single TRIGA fuel surrounded by water. Typical calculations of TRIGA fuel reactivity are usually limited to ST8 fuel, but in this paper our investigation extends to ST12 and LEU fuel. We look at the kin f of our model at various fuel temperatures and calculate the amount reactivity removed. In one instance, the water temperature is kept at room temperature of 300K to simulate sudden reactivity increase from startup. In another instance, we simulate the sudden temperature increase during normal operation where the water temperature is approximately 320K while observing the kin f at various fuel temperatures. For accidents, two cases are simulated. The first case is for water temperature at 370K and the other is without any water. We observe that the higher Uranium content fuel such as the ST12 and LEU have much smaller contribution to the reactivity in comparison to the often studied ST8 fuel. In fact the negative reactivity coefficient for LEU fuel at high temperature in water is only slightly larger to the negative reactivity coefficient for ST8 fuel in void. The performance of ST8 fuel in terms of negative reactivity coefficient is cut almost by half when it is in void. These results are essential in the safety evaluation of the reactor and should be carefully considered when choices of fuel for core reconfiguration are made.

Super safe small reactor RAPID-L conceptual design and R and D. JAERI's nuclear research promotion program, H11-002 (Contract research)

Energy Technology Data Exchange (ETDEWEB)

Kambe, Mitsuru [Central Research Inst. of Electric Power Industry, Tokyo (Japan); Tsunoda, Hirokazu [Mitsubishi Research Inst., Inc., Tokyo (Japan); Mishima, Kaichiro [Kyoto Univ., Kyoto (Japan); Kawasaki, Akira [Tohoku Univ., School of Engineering, Sendai, Miyagi (Japan); Iwamura, Takamichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2003-03-01

The 200 kWe uranium nitride fueled lithium cooled fast reactor 'RAPID-L' combined with thermoelectric power conversion system that can be operated unmanned without refueling for up to ten years has been demonstrated. The RAPID refueling concept enables quick and simplified refueling, and achieves plant design lifetime over 20 years. A significant advantage of the RAPID-L design, which does not require the use of control rods - is the introduction of the innovative reactivity control systems: lithium expansion module (LEM), lithium injection module (LIM) and lithium release module (LRM). LEM is the most promising candidate for improving inherent reactivity feedback. LEMs could realize burnup compensation. LIMs assure sufficient negative reactivity feedback in unprotected transients. LRMs enable an automated reactor startup by detecting the hot standby temperature of the primary coolant. All these systems use {sup 6}Li as liquid poison and are actuated by highly reliable physical properties (volume expansion of {sup 6}Li for LEM, and freeze seal melting for LIM and LRM). (author)

Lessons from feedback of safety operating experience for reactor physics

International Nuclear Information System (INIS)

Suchomel, J.; Rapavy, S.

1999-01-01

Analyses of events in WWER operations as a part of safety experience feedback provide a valuable source of lessons for reactor physics. Examples of events from Bohunice operation will be shown such as events with inadequate approach to criticality, positive reactivity insertions, expulsion of a control rod from shut-down reactor, problems with reactor protection system and control rods. (Authors)

Follower-Centered Perspective on Feedback: Effects of Feedback Seeking on Identification and Feedback Environment

OpenAIRE

Gong, Zhenxing; Li, Miaomiao; Qi, Yaoyuan; Zhang, Na

2017-01-01

In the formation mechanism of the feedback environment, the existing research pays attention to external feedback sources and regards individuals as objects passively accepting feedback. Thus, the external source fails to realize the individuals’ need for feedback, and the feedback environment cannot provide them with useful information, leading to a feedback vacuum. The aim of this study is to examine the effect of feedback-seeking by different strategies on the supervisor-feedback environme...

Assessment of CANDU-6 reactivity devices for DUPIC fuel

International Nuclear Information System (INIS)

Jeong, Chang Joon; Choi, Hang Bok

1998-11-01

Reactivity device characteristics for a CANDU 6 reactor loaded with DUPIC fuel have been assessed. The lattice parameters were generated by WIMS-AECL code and the core calculations were performed by RFSP code with a 3-dimensional full core model. The reactivity devices studied are the zone controller, adjusters, mechanical control absorber and shutoff rods. For the zone controller system, damping capability for spatial oscillation was investigated. For the adjusters, the restart capability was investigated. For the adjusters, the restart capability was investigated. The shin operation and power stepback calculation were also performed to confirm the compatibility of the current adjuster system. The mechanical control absorber was assessed for the function of compensating temperature reactivity feedback following a power reduction. And shutoff rods were also assessed to investigate the following a power reduction. And shutoff rods were also assessed to investigate the static reactivity worth. This study has shown that the current reactivity device system of CANDU-6 core with the DUPIC fuel. (author). 9 refs., 17 tabs., 7 figs

Investigations of the influence of feedback and coupling effects on neutron noise in a nuclear reactor

International Nuclear Information System (INIS)

Vath, W.

1975-01-01

Investigations are described of the influence of a known feedback, i.e., a control loop with known transfer function, on the spectra of neutron chamber signals. Theoretical formulas for the spectra are derived using the point reactor model. These formulas were verified by noise measurements in a zero power reactor. Special attention is given to the noise generated by the control loop, the influence of this feedback noise on the spectra being verified experimentally. In large reactors space dependent transfer functions must be taken into account. As a first approximation to handle the spatial dependence, the afore-mentioned investigations were extended to the two-point reactor model. Corresponding experimental work was done for the Argonaut Reactor Karlsruhe (ARK) with a symmetrical two-slab core loading. Coolant boiling in a BWR was investigated. The boiling must be considered as a feedback mechanism as well as an extrnal reactivity perturbation. In order to simulate the steam bubble content, nitrogen gas was injected into the water moderator of the ARK. By modulating the total gas flow according to the instantaneous reactor power the feedback effect was simulated. The gas flow produced a band-limited, white reactivity noise. The upper break frequency could be used to determine the travelling time of the bubbles through the core. (author)

A conceptual framework for regional feedbacks in a changing climate

Science.gov (United States)

Batlle Bayer, L.; van den Hurk, B. J. J. M.; Strengers, B.

2012-04-01

Terrestrial ecosystems and climate influence each other through biogeochemical (e.g. carbon cycle) and biogeophysical (e.g. albedo, water fluxes) processes. These interactions might be disturbed when a climate human-induced forcing takes place (e.g. deforestation); and the ecosystem responses to the climate system might amplify (positive feedback) or dampen (negative feedback) the initial forcing. Research on feedbacks has been mainly based on the carbon cycle at the global scale. However, biogeophysical feedbacks might have a great impact at the local or regional scale, which is the main focus of this article. A conceptual framework, with the major interactions and processes between terrestrial ecosystems and climate, is presented to further explore feedbacks at the regional level. Four hot spots with potential changes in land use/management and climate are selected: sub-Saharan Africa (SSA), Europe, the Amazon Basin and South and Southeast Asia. For each region, diverse climate human-induced forcings and feedbacks were identified based on relevant published literature. For Europe, the positive soil moisture-evapotranspiration (ET) is important for natural vegetation during a heat wave event, while the positive soil moisture-precipitation feedback plays a more important role for droughts in the Amazon region. Agricultural expansion in SSA will depend on the impacts of the changing climate on crop yields and the adopted agro-technologies. The adoption of irrigation in the commonly rainfed systems might turn the positive soil moisture- ET feedback into a negative one. In contrast, South and Southeast Asia might face water shortage in the future, and thus turning the soil moisture-ET feedback into a positive one. Further research is needed for the major processes that affect the ultimate sign of the feedbacks, as well as for the interactions, which effect remains uncertain, such as ET-precipitation interaction. In addition, socio-economic feedbacks need to be added

An analytical approximation for the prediction of transients with temperature feedback

Energy Technology Data Exchange (ETDEWEB)

Palma, Daniel A.P. [Instituto Federal do Rio de Janeiro (IFRJ), RJ (Brazil); Martinez, Aquilino S. [COPPE/UFRJ, RJ (Brazil). Programa de Engenharia Nuclear

2010-05-15

In the present paper a new analytical solution for the point kinetics equation system with temperature feedback is presented. This solution is based on the expansion of the neutron density in terms of the generation time of prompt neutrons (Nahla, 2009) and presents the advantage of being explicit in time and having a simple functional form in comparison with other existing formulations in supercritical transients. (orig.)

An analytical approximation for the prediction of transients with temperature feedback

International Nuclear Information System (INIS)

Palma, Daniel A.P.; Martinez, Aquilino S.

2010-01-01

In the present paper a new analytical solution for the point kinetics equation system with temperature feedback is presented. This solution is based on the expansion of the neutron density in terms of the generation time of prompt neutrons (Nahla, 2009) and presents the advantage of being explicit in time and having a simple functional form in comparison with other existing formulations in supercritical transients. (orig.)

Analysis of prompt supercritical process with heat transfer and temperature feedback

Institute of Scientific and Technical Information of China (English)

ZHU BO; ZHU Qian; CHEN Zhiyun

2009-01-01

The prompt supercritical process of a nuclear reactor with temperature feedback and initial power as well as heat transfer with a big step reactivity (ρ0>β) is analyzed in this paper.Considering the effect of heat transfer on temperature of the reactor,a new model is set up.For any initial power,the variations of output power and reactivity with time are obtained by numerical method.The effects of the big inserted step reactivity and initial power on the prompt supercritical process are analyzed and discussed.It was found that the effect of heat transfer on the output power and reactivity can be neglected under any initial power,and the output power obtained by the adiabatic model is basically in accordance with that by the model of this paper,and the analytical solution can be adopted.The results provide a theoretical base for safety analysis and operation management of a power reactor.

Accurate reactivity void coefficient calculation for the fast spectrum reactor FBR-IME

Energy Technology Data Exchange (ETDEWEB)

Lima, Fabiano P.C.; Vellozo, Sergio de O.; Velozo, Marta J., E-mail: fabianopetruceli@outlook.com, E-mail: vellozo@cbpf.br, E-mail: martajann@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Militar

2017-07-01

This paper aims to present an accurate calculation of the void reactivity coefficient for the FBR-IME, a fast spectrum reactor in development at the Engineering Military Institute (IME). The main design peculiarity lies in using mixed oxide [MOX - PuO{sub 2} + U(natural uranium)O{sub 2}] as fuel core. For this task, SCALE system was used to calculate the reactivity for several voids distributions generated by bubbles in the sodium beyond its boiling point. The results show that although the void reactivity coefficient is positive and location dependent, they are offset by other feedback effects, resulting in a negative overall coefficient. (author)

Analysis of reactivity feedback effects of void and temperature in the MAPLE-X10 reactor

International Nuclear Information System (INIS)

Carlson, P.A.; Heeds, W.; Shim, S.Y.; King, S.G.

1992-07-01

The methods used for evaluating the void and temperature reactivity coefficients for the MAPLE-X10 Reactor are described and factors used in estimating their accuracy are discussed. The report presents representative transient analysis results using the CATHENA thermalhydraulics code. The role of the reactivity coefficients and their precision is discussed. The results are reviewed in terms of their safety implications

Improved water density feedback model for pressurized water reactors

International Nuclear Information System (INIS)

Casadei, A.L.

1976-01-01

An improved water density feedback model has been developed for neutron diffusion calculations of PWR cores. This work addresses spectral effects on few-group cross sections due to water density changes, and water density predictions considering open channel and subcooled boiling effects. An homogenized spectral model was also derived using the unit assembly diffusion method for employment in a coarse mesh 3D diffusion computer program. The spectral and water density evaluation models described were incorporated in a 3D diffusion code, and neutronic calculations for a typical PWR were completed for both nominal and accident conditions. Comparison of neutronic calculations employing the open versus the closed channel model for accident conditions indicates that significant safety margin increases can be obtained if subcooled boiling and open channel effects are considered in accident calculations. This is attributed to effects on both core reactivity and power distribution, which result in increased margin to fuel degradation limits. For nominal operating conditions, negligible differences in core reactivity and power distribution exist since flow redistribution and subcooled voids are not significant at such conditions. The results serve to confirm the conservatism of currently employed closed channel feedback methods in accident analysis, and indicate that the model developed in this work can contribute to show increased safety margins for certain accidents

A feasibility study on wavelet transform for reactivity coefficient estimation

International Nuclear Information System (INIS)

Shimazu, Yoichiro

2000-01-01

Recently, a new method using Fourier transform has been introduced in place of the conventional method in order to reduce the time required for the measurement of moderator temperature coefficient in domestic PWRs. The basic concept of these methods is to eliminate noise in the reactivity signal. From this point of view, wavelet analysis is also known as an effective method. In this paper, we tried to apply this method to estimate reactivity coefficients of a nuclear reactor. The basic idea of the reactivity coefficient estimation is to analyze the ratios themselves of the corresponding expansion coefficients of the wavelet transform of the signals of reactivity and the relevant parameter. The concept requires no inverse wavelet transform. Based on numerical simulations, it is found that the method can reasonably estimate reactivity coefficient, for example moderator temperature coefficient, with less length of time sequence data than those required for Fourier transform method. We will continue this study to examine the validity of the estimation procedure for the actual reactor data and further to estimate the other reactivity coefficients. (author)

Space Flight-Induced Reactivation of Latent Epstein-Barr Virus

Science.gov (United States)

Stowe, Raymond P.; Barrett, Alan D. T.; Pierson, Duane L.

2001-01-01

Reactivation of latent Epstein-Barr virus (EBV) may be an important threat to crew health during extended space missions. Decreased cellular immune function has been reported both during and after space flight. Preliminary studies have demonstrated increased EBV shedding in saliva as well as increased antibody titers to EBV lytic proteins. We hypothesize that the combined effects of microgravity along with associated physical and psychological stress will decrease EBV-specific T-cell immunity and reactivate latent EBV in infected B-lymphocytes. If increased virus production and clonal expansion of infected B-lymphocytes are detected, then pharmacological measures can be developed and instituted prior to onset of overt clinical disease. More importantly, we will begin to understand the basic mechanisms involved in stress-induced reactivation of EBV in circulating B-lymphocytes.

Expansion of mycobacterium-reactive gamma delta T cells by a subset of memory helper T cells.

Science.gov (United States)

Vila, L M; Haftel, H M; Park, H S; Lin, M S; Romzek, N C; Hanash, S M; Holoshitz, J

1995-04-01

Human gamma delta T cells expressing the V gamma 9/V delta 2 T-cell receptor have been previously found to proliferate in response to certain microorganisms and to expand throughout life, presumably because of extrathymic activation by foreign antigens. In vitro expansion of V gamma 9/V delta 2 cells by mycobacteria has been previously shown to be dependent on accessory cells. In order to gain an insight into the mechanisms involved in the expansion of these cells, we have undertaken to identify the peripheral blood subset of cells on which proliferation of V gamma 9/V delta 2 cells in response to mycobacteria is dependent. Contrary to their role in antigen presentation to alpha beta T cells, professional antigen-presenting cells, such as monocytes, B cells, and dendritic cells, were unable to provide the cellular support for the expansion of V gamma 9/V delta 2 cells. Selective depletion of T-cell subsets, as well as the use of highly purified T-cell populations, indicated that the only subset of peripheral blood cells that could expand V gamma 9/V delta 2 cells were CD4+ CD45RO+ CD7- alpha beta T cells. These cells underwent distinct intracellular signaling events after stimulation with the mycobacterial antigen. Expansion of V gamma 9/V delta 2 cells by alpha beta T cells was dependent on cell-cell contact. This is the first evidence that a small subset of the memory helper T-cell population is exclusively responsible for the peripheral expansion of V gamma 9/V delta 2 cells. These data illustrate a unique aspect of antigen recognition by gamma delta T cells and provide new means to study their immune defense role.

Technical feasibility study of 60 MWe fast reactor concept: RAPID

International Nuclear Information System (INIS)

Kambe, Mitsuru; Ueda, Nobuyuki; Uotani, Masaki

1993-01-01

A study has been performed on the passive safety features and technical feasibility of an inherently safe 60 MWe fast reactor concept RAPID to meet various power requirements in Japan. The system dynamic analyses on the UTOP and ULOF transients revealed that the enhanced reactivity feedback derived from an annular core configuration and the integrated fuel assembly provides a high margin of self-protection. Structural integrity of the integrated fuel assembly has also been confirmed. The following innovative key technologies have been demonstrated; Lithium Injection Modules (LIM) for ultimate shutdown, Lithium Expansion Modulus (LEM) for inherent reactivity feedback and Void Leading Channel (VLC) for the sodium void worth reduction. (author)

Inhibitory Effect of Waste Glass Powder on ASR Expansion Induced by Waste Glass Aggregate

Directory of Open Access Journals (Sweden)

Shuhua Liu

2015-10-01

Full Text Available Detailed research is carried out to ascertain the inhibitory effect of waste glass powder (WGP on alkali-silica reaction (ASR expansion induced by waste glass aggregate in this paper. The alkali reactivity of waste glass aggregate is examined by two methods in accordance with the China Test Code SL352-2006. The potential of WGP to control the ASR expansion is determined in terms of mean diameter, specific surface area, content of WGP and curing temperature. Two mathematical models are developed to estimate the inhibitory efficiency of WGP. These studies show that there is ASR risk with an ASR expansion rate over 0.2% when the sand contains more than 30% glass aggregate. However, WGP can effectively control the ASR expansion and inhibit the expansion rate induced by the glass aggregate to be under 0.1%. The two mathematical models have good simulation results, which can be used to evaluate the inhibitory effect of WGP on ASR risk.

Reactivity changes in hybrid thermal-fast reactor systems during fast core flooding

International Nuclear Information System (INIS)

Pesic, M.

1994-09-01

A new space-dependent kinetic model in adiabatic approximation with local feedback reactivity parameters for reactivity determination in the coupled systems is proposed in this thesis. It is applied in the accident calculation of the 'HERBE' fast-thermal reactor system and compared to usual point kinetics model with core-averaged parameters. Advantages of the new model - more realistic picture of the reactor kinetics and dynamics during local large reactivity perturbation, under the same heat transfer conditions, are underlined. Calculated reactivity parameters of the new model are verified in the experiments performed at the 'HERBE' coupled core. The model has shown that the 'HERBE' safety system can shutdown reactor safely and fast even in the case of highly set power trip and even under conditions of big partial failure of the reactor safety system (author)

Suspicion of Motives Predicts Minorities' Responses to Positive Feedback in Interracial Interactions.

Science.gov (United States)

Major, Brenda; Kunstman, Jonathan W; Malta, Brenna D; Sawyer, Pamela J; Townsend, Sarah S M; Mendes, Wendy Berry

2016-01-01

Strong social and legal norms in the United States discourage the overt expression of bias against ethnic and racial minorities, increasing the attributional ambiguity of Whites' positive behavior to ethnic minorities. Minorities who suspect that Whites' positive overtures toward minorities are motivated more by their fear of appearing racist than by egalitarian attitudes may regard positive feedback they receive from Whites as disingenuous. This may lead them to react to such feedback with feelings of uncertainty and threat. Three studies examined how suspicion of motives relates to ethnic minorities' responses to receiving positive feedback from a White peer or same-ethnicity peer (Experiment 1), to receiving feedback from a White peer that was positive or negative (Experiment 2), and to receiving positive feedback from a White peer who did or did not know their ethnicity (Experiment 3). As predicted, the more suspicious Latinas were of Whites' motives for behaving positively toward minorities in general, the more they regarded positive feedback from a White peer who knew their ethnicity as disingenuous and the more they reacted with cardiovascular reactivity characteristic of threat/avoidance, increased feelings of stress, heightened uncertainty, and decreased self-esteem. We discuss the implications for intergroup interactions of perceptions of Whites' motives for nonprejudiced behavior.

Suspicion of Motives Predicts Minorities’ Responses to Positive Feedback in Interracial Interactions

Science.gov (United States)

Major, Brenda; Kunstman, Jonathan W.; Malta, Brenna D.; Sawyer, Pamela J.; Townsend, Sarah S. M.; Mendes, Wendy Berry

2015-01-01

Strong social and legal norms in the United States discourage the overt expression of bias against ethnic and racial minorities, increasing the attributional ambiguity of Whites’ positive behavior to ethnic minorities. Minorities who suspect that Whites’ positive overtures toward minorities are motivated more by their fear of appearing racist than by egalitarian attitudes may regard positive feedback they receive from Whites as disingenuous. This may lead them to react to such feedback with feelings of uncertainty and threat. Three studies examined how suspicion of motives relates to ethnic minorities’ responses to receiving positive feedback from a White peer or same-ethnicity peer (Experiment 1), to receiving feedback from a White peer that was positive or negative (Experiment 2), and to receiving positive feedback from a White peer who did or did not know their ethnicity (Experiment 3). As predicted, the more suspicious Latinas were of Whites’ motives for behaving positively toward minorities in general, the more they regarded positive feedback from a White peer who knew their ethnicity as disingenuous and the more they reacted with cardiovascular reactivity characteristic of threat/avoidance, increased feelings of stress, heightened uncertainty, and decreased self-esteem. We discuss the implications for intergroup interactions of perceptions of Whites’ motives for nonprejudiced behavior. PMID:26688594

The impact of fuel temperature reactivity coefficient on loss of reactivity control accident

International Nuclear Information System (INIS)

Park, J. H.; Ryu, E. H.; Song, Y. M.; Jung, J. Y.

2012-01-01

Nuclear reactors experience small power fluctuations or anticipated operational transients during even normal power operation. During normal operation, the reactivity is mainly controlled by liquid zone controllers, adjuster rods, mechanical control absorbers, and moderator poison. Even when the reactor power is increased abruptly and largely from an accident and when reactor control systems cannot be actuated quickly due to a fast transient, the reactor should be controlled and stabilized by its inherent safety parameter, such as a negative PCR (Power Coefficient of Reactivity) feedback. A PWR (Pressurized Water Reactor), it is well designed for the reactor to have a negative PCR so that the reactor can be safely shut down or stabilized whenever an abrupt reactivity insertion into the reactor core occurs or the reactor power is abruptly increased. However, it is known that a CANDU reactor has a small amount of PCR, as either negative or positive, because of the different design basis and safety concepts from a PWR. CNSC's regulatory and safety regime has stated that; The PCR of CANDU reactors does not pose a significant risk. Consistent with Canadian nuclear safety requirements, nuclear power plants must have an appropriate combination of inherent and engineered safety features incorporated into the design of the reactor safety and control systems. A reactor design that has a PCR is quite acceptable provided that the reactor is stable against power fluctuations, and that the probability and consequences of any potential accidents that would be aggravated by a positive reactivity feedback are maintained within CNSCprescribed limits. Recently, it was issued licensing the refurbished Wolsong unit 1 in Korea to be operated continuously after its design lifetime in which the calculated PCR was shown to have a small positive value by applying the recent physics code systems, which are composed of WIMS IST, DRAGON IST, and RFSP IST. These code systems were transferred

Cluster-based query expansion using external collections in medical information retrieval.

Science.gov (United States)

Oh, Heung-Seon; Jung, Yuchul

2015-12-01

Utilizing external collections to improve retrieval performance is challenging research because various test collections are created for different purposes. Improving medical information retrieval has also gained much attention as various types of medical documents have become available to researchers ever since they started storing them in machine processable formats. In this paper, we propose an effective method of utilizing external collections based on the pseudo relevance feedback approach. Our method incorporates the structure of external collections in estimating individual components in the final feedback model. Extensive experiments on three medical collections (TREC CDS, CLEF eHealth, and OHSUMED) were performed, and the results were compared with a representative expansion approach utilizing the external collections to show the superiority of our method. Copyright © 2015 Elsevier Inc. All rights reserved.

Solution of Point Reactor Neutron Kinetics Equations with Temperature Feedback by Singularly Perturbed Method

Directory of Open Access Journals (Sweden)

Wenzhen Chen

2013-01-01

Full Text Available The singularly perturbed method (SPM is proposed to obtain the analytical solution for the delayed supercritical process of nuclear reactor with temperature feedback and small step reactivity inserted. The relation between the reactivity and time is derived. Also, the neutron density (or power and the average density of delayed neutron precursors as the function of reactivity are presented. The variations of neutron density (or power and temperature with time are calculated and plotted and compared with those by accurate solution and other analytical methods. It is shown that the results by the SPM are valid and accurate in the large range and the SPM is simpler than those in the previous literature.

Numerical solution of the point reactor kinetics equations with fuel burn-up and temperature feedback

International Nuclear Information System (INIS)

Tashakor, S.; Jahanfarnia, G.; Hashemi-Tilehnoee, M.

2010-01-01

Point reactor kinetics equations are solved numerically using one group of delayed neutrons and with fuel burn-up and temperature feedback included. To calculate the fraction of one-group delayed neutrons, a group of differential equations are solved by an implicit time method. Using point reactor kinetics equations, changes in mean neutrons density, temperature, and reactivity are calculated in different times during the reactor operation. The variation of reactivity, temperature, and maximum power with time are compared with the predictions by other methods.

Simple kinetic theory model of reactive collisions. IV. Laboratory fixed orientational cross sections

International Nuclear Information System (INIS)

Evans, G.T.

1987-01-01

The differential orientational cross section, obtainable from molecular beam experiments on aligned molecules, is calculated using the line-of-normals model for reactive collisions involving hard convex bodies. By means of kinetic theory methods, the dependence of the cross section on the angle of attack γ 0 is expressed in a Legendre function expansion. Each of the Legendre expansion coefficients is given by an integral over the molecule-fixed cross section and functions of the orientation dependent threshold energy

The Roles of Feedback and Feedforward as Humans Learn to Control Unknown Dynamic Systems.

Science.gov (United States)

Zhang, Xingye; Wang, Shaoqian; Hoagg, Jesse B; Seigler, T Michael

2018-02-01

We present results from an experiment in which human subjects interact with an unknown dynamic system 40 times during a two-week period. During each interaction, subjects are asked to perform a command-following (i.e., pursuit tracking) task. Each subject's performance at that task improves from the first trial to the last trial. For each trial, we use subsystem identification to estimate each subject's feedforward (or anticipatory) control, feedback (or reactive) control, and feedback time delay. Over the 40 trials, the magnitudes of the identified feedback controllers and the identified feedback time delays do not change significantly. In contrast, the identified feedforward controllers do change significantly. By the last trial, the average identified feedforward controller approximates the inverse of the dynamic system. This observation provides evidence that a fundamental component of human learning is updating the anticipatory control until it models the inverse dynamics.

The dynamics of second-order equations with delayed feedback and a large coefficient of delayed control

Science.gov (United States)

Kashchenko, Sergey A.

2016-12-01

The dynamics of second-order equations with nonlinear delayed feedback and a large coefficient of a delayed equation is investigated using asymptotic methods. Based on special methods of quasi-normal forms, a new construction is elaborated for obtaining the main terms of asymptotic expansions of asymptotic residual solutions. It is shown that the dynamical properties of the above equations are determined mostly by the behavior of the solutions of some special families of parabolic boundary value problems. A comparative analysis of the dynamics of equations with the delayed feedback of three types is carried out.

An Evaluation of the Interactive Query Expansion in an Online Library Catalogue with a Graphical User Interface.

Science.gov (United States)

Hancock-Beaulieu, Micheline; And Others

1995-01-01

An online library catalog was used to evaluate an interactive query expansion facility based on relevance feedback for the Okapi, probabilistic, term weighting, retrieval system. A graphical user interface allowed searchers to select candidate terms extracted from relevant retrieved items to reformulate queries. Results suggested that the…

Feedback Valence Affects Auditory Perceptual Learning Independently of Feedback Probability

Science.gov (United States)

Amitay, Sygal; Moore, David R.; Molloy, Katharine; Halliday, Lorna F.

2015-01-01

Previous studies have suggested that negative feedback is more effective in driving learning than positive feedback. We investigated the effect on learning of providing varying amounts of negative and positive feedback while listeners attempted to discriminate between three identical tones; an impossible task that nevertheless produces robust learning. Four feedback conditions were compared during training: 90% positive feedback or 10% negative feedback informed the participants that they were doing equally well, while 10% positive or 90% negative feedback informed them they were doing equally badly. In all conditions the feedback was random in relation to the listeners’ responses (because the task was to discriminate three identical tones), yet both the valence (negative vs. positive) and the probability of feedback (10% vs. 90%) affected learning. Feedback that informed listeners they were doing badly resulted in better post-training performance than feedback that informed them they were doing well, independent of valence. In addition, positive feedback during training resulted in better post-training performance than negative feedback, but only positive feedback indicating listeners were doing badly on the task resulted in learning. As we have previously speculated, feedback that better reflected the difficulty of the task was more effective in driving learning than feedback that suggested performance was better than it should have been given perceived task difficulty. But contrary to expectations, positive feedback was more effective than negative feedback in driving learning. Feedback thus had two separable effects on learning: feedback valence affected motivation on a subjectively difficult task, and learning occurred only when feedback probability reflected the subjective difficulty. To optimize learning, training programs need to take into consideration both feedback valence and probability. PMID:25946173

Broadcasting a Common Message with Variable-Length Stop-Feedback codes

DEFF Research Database (Denmark)

Trillingsgaard, Kasper Fløe; Yang, Wei; Durisi, Giuseppe

2015-01-01

We investigate the maximum coding rate achievable over a two-user broadcast channel for the scenario where a common message is transmitted using variable-length stop-feedback codes. Specifically, upon decoding the common message, each decoder sends a stop signal to the encoder, which transmits...... itself in the absence of a square-root penalty in the asymptotic expansion of the maximum coding rate for large blocklengths, a result also known as zero dispersion. In this paper, we show that this speed-up does not necessarily occur for the broadcast channel with common message. Specifically...... continuously until it receives both stop signals. For the point-to-point case, Polyanskiy, Poor, and Verdú (2011) recently demonstrated that variable-length coding combined with stop feedback significantly increases the speed at which the maximum coding rate converges to capacity. This speed-up manifests...

Study on the effect of moderator density reactivity for Kartini reactor

International Nuclear Information System (INIS)

Budi Rohman; Widarto

2009-01-01

One of important characteristics of water-cooled reactors is the change of reactivity due to change in the density of coolant or moderator. This parameter generally has negative value and it has significant role in preventing the excursion of power during operation. Many thermal-hydraulic codes for nuclear reactors require this parameter as the input to account for reactivity feedback due to increase in moderator voids and the subsequent decrease in moderator density during operation. Kartini reactor is cooled and moderated by water, therefore, it is essential to study the effect of the change in moderator density as well as to determine the value of void or moderator density reactivity coefficient in order to characterize its behavior resulting from the presence of vapor or change of moderator density during operation. Analysis by MCNP code shows that the reactivity of core is decreasing with the decrease in moderator density. The analysis estimates the void or moderator density reactivity coefficient for Kartini Reactor to be -2.17×10-4 Δρ/ % void . (author)

Effects of loading reactivity at dynamic state on wave of neutrons in burst reactor

International Nuclear Information System (INIS)

Gao Hui; Liu Xiaobo; Fan Xiaoqiang

2013-01-01

Based on the point reactor model, the program for simulating the burst of reactors, including delay neutron, thermal feedback and reactivity of rod, was developed. The program proves to be suitable to burst reactor by experimental data. The program can describe the process of neutron-intensity change in burst reactors. With the program, the parameters of burst (wave of burst, power of peak and reactivity of reactor) under the condition of dynamic reactivity can be calculated. The calculated result demonstrates that the later the burst is initiated, the greater its power of peak and yield are and that the maximum yield coordinates with the yield under static state. (authors)

Paraquat-induced reactive oxygen species inhibit neutrophil apoptosis via a p38 MAPK/NF-κB-IL-6/TNF-α positive-feedback circuit.

Directory of Open Access Journals (Sweden)

Xiaolong Wang

Full Text Available Paraquat (PQ, a widely used herbicide and potent reactive oxygen species (ROS inducer, can injure multiple tissues and organs, especially the lung. However, the underlying mechanism is still poorly understood. According to previous reports, neutrophil aggregation and excessive ROS production might play pivotal pathogenetic roles. In the present study, we found that PQ could prolong neutrophil lifespan and induce ROS generation in a concentration-independent manner. Activated nuclear factor-κB (NF-κB, p38 mitogen-activated kinase (p38 MAPK, and myeloid cell leukemia sequence 1 (Mcl-1 but not Akt signaling pathways were involved in this process, as well as increasing levels of interleukin-6 (IL-6, tumor necrosis factor-α (TNF-α, and IL-1β. Furthermore, the proinflammatory mediators IL-6 and TNF-α could in turn promote ROS generation, creating a vicious cycle. The existence of such a feedback loop is supported by our finding that neutrophil apoptosis is attenuated by PQ in a concentration-independent manner and could partially explain the clinical dilemma why oxygen therapy will exacerbate PQ induced tissue injury.

Temperature-monitored optical treatment for radial tissue expansion.

Science.gov (United States)

Bak, Jinoh; Kang, Hyun Wook

2017-07-01

Esophageal stricture occurs in 7-23% of patients with gastroesophageal reflux disease. However, the current treatments including stent therapy, balloon dilation, and bougienage involve limitations such as stent migration, formation of the new strictures, and snowplow effect. The purpose of the current study was to investigate the feasibility of structural expansion in tubular tissue ex vivo during temperature-monitored photothermal treatment with a diffusing applicator for esophageal stricture. Porcine liver was used as an ex vivo tissue sample for the current study. A glass tube was used to maintain a constant distance between the diffuser and tissue surface and to evaluate any variations in the luminal area after 10-W 1470-nm laser irradiation for potential stricture treatment. The 3D goniometer measurements confirmed roughly isotropic distribution with less than 10% deviation from the average angular intensity over 2π (i.e., 0.86 ± 0.09 in arbitrary unit) from the diffusing applicator. The 30-s irradiation increased the tissue temperature up to 72.5 °C, but due to temperature feedback, the interstitial tissue temperature became saturated at 70 °C (i.e., steady-state error = ±0.4 °C). The irradiation times longer than 5 s presented area expansion index of 1.00 ± 0.04, signifying that irreversible tissue denaturation permanently deformed the lumen in a circular shape and secured the equivalent luminal area to that of the glass tube. Application of a temperature feedback controller for photothermal treatment with the diffusing applicator can regulate the degree of thermal denaturation to feasibly treat esophageal stricture in a tubular tissue.

A reactive empirical bond order (REBO) potential for hydrocarbon-oxygen interactions

International Nuclear Information System (INIS)

Ni, Boris; Lee, Ki-Ho; Sinnott, Susan B

2004-01-01

The expansion of the second-generation reactive empirical bond order (REBO) potential for hydrocarbons, as parametrized by Brenner and co-workers, to include oxygen is presented. This involves the explicit inclusion of C-O, H-O, and O-O interactions to the existing C-C, C-H, and H-H interactions in the REBO potential. The details of the expansion, including all parameters, are given. The new, expanded potential is then applied to the study of the structure and chemical stability of several molecules and polymer chains, and to modelling chemical reactions among a series of molecules, within classical molecular dynamics simulations

Calculation of reactivity using a finite impulse response filter

Energy Technology Data Exchange (ETDEWEB)

Suescun Diaz, Daniel [COPPE/UFRJ, Programa de Engenharia Nuclear, Caixa Postal 68509, CEP 21941-914, RJ (Brazil); Senra Martinez, Aquilino [COPPE/UFRJ, Programa de Engenharia Nuclear, Caixa Postal 68509, CEP 21941-914, RJ (Brazil)], E-mail: aquilino@lmp.ufrj.br; Carvalho Da Silva, Fernando [COPPE/UFRJ, Programa de Engenharia Nuclear, Caixa Postal 68509, CEP 21941-914, RJ (Brazil)

2008-03-15

A new formulation is presented in this paper to solve the inverse kinetics equation. This method is based on the Laplace transform of the point kinetics equations, resulting in an expression equivalent to the inverse kinetics equation as a function of the power history. Reactivity can be written in terms of the summation of convolution with response to impulse, characteristic of a linear system. For its digital form the Z-transform is used, which is the discrete version of the Laplace transform. This new method of reactivity calculation has very special features, amongst which it can be pointed out that the linear part is characterized by a filter named finite impulse response (FIR). The FIR filter will always be, stable and non-varying in time, and, apart from this, it can be implemented in the non-recursive form. This type of implementation does not require feedback, allowing the calculation of reactivity in a continuous way.

Reactivity feedback evaluation of material relocations in the CABRI-1 experiments with fuel worth distributions from SNR-300

International Nuclear Information System (INIS)

Royl, P.; Pfrang, W.; Struwe, D.

1991-01-01

The fuel relocations from the CABRI-1 experiments with irradiated fuel that had been evaluated from the hodoscope measurements were used together with fuel reactivity worth distributions from the SNR-300 to estimate the reactivity effect which these motions would have if they occurred in SNR-300 at the same relative distance to the peak power as in CABRI. The procedure for the reactivity evaluation is outlined including the assumptions made for fuel mass conservation. The results show that the initial fuel motion yields always negative reactivities. They also document the mechanism for a temporary reactivity increase by in-pin fuel flow in some transient overpower tests. This mechanism, however, never dominates, because material accumulates always sufficiently above the peak power point. Thus, the late autocatalytic amplifications of voiding induced power excursions by compactive in-pin fuel flow, that had been simulated in bounding loss of flow analyses for SNR-300, have no basis at all when considering the results from the CABRI-1 experiments

The modification of main steam safety valves in Qinshan phase Ⅱ expansion project

International Nuclear Information System (INIS)

Chen Haiqiao

2012-01-01

The main steam safety valves of NPP steam system are second- class nuclear safety component. It used to limit the pressure of SG secondary side and main steam system via emitting steam into the environment. At present, the main steam safety valves have mechanical valves and assisted power valves. According to the experience of power plants at home and abroad, including Qinshan Phase Ⅱ unit 1/2 experience feedback, Qinshan Phase Ⅱ expansion project made modification on valve type, setting value and valve body. This paper introduce the characteristics of different safety valve types, the modification of main steam safety valves and the modification analysis on safety issues.security and impact on the other systems in Qinshan Phase Ⅱ expansion project. (author)

An fMRI study of nicotine-deprived smokers' reactivity to smoking cues during novel/exciting activity.

Directory of Open Access Journals (Sweden)

Xiaomeng Xu

Full Text Available Engaging in novel/exciting ("self-expanding" activities activates the mesolimbic dopamine pathway, a brain reward pathway also associated with the rewarding effects of nicotine. This suggests that self-expanding activities can potentially substitute for the reward from nicotine. We tested this model among nicotine-deprived smokers who, during fMRI scanning, played a series of two-player cooperative games with a relationship partner. Games were randomized in a 2 (self-expanding vs. not x 2 (cigarette cue present vs. absent design. Self-expansion conditions yielded significantly greater activation in a reward region (caudate than did non-self-expansion conditions. Moreover, when exposed to smoking cues during the self-expanding versus the non-self-expanding cooperative games, smokers showed less activation in a cigarette cue-reactivity region, a priori defined [temporo-parietal junction (TPJ] from a recent meta-analysis of cue-reactivity. In smoking cue conditions, increases in excitement associated with the self-expanding condition (versus the non-self-expanding condition were also negatively correlated with TPJ activation. These results support the idea that a self-expanding activity promoting reward activation attenuates cigarette cue-reactivity among nicotine-deprived smokers. Future research could focus on the parameters of self-expanding activities that produce this effect, as well as test the utility of self-expansion in clinical interventions for smoking cessation.

Audio Feedback -- Better Feedback?

Science.gov (United States)

Voelkel, Susanne; Mello, Luciane V.

2014-01-01

National Student Survey (NSS) results show that many students are dissatisfied with the amount and quality of feedback they get for their work. This study reports on two case studies in which we tried to address these issues by introducing audio feedback to one undergraduate (UG) and one postgraduate (PG) class, respectively. In case study one…

Use of thermodynamics and expansion in parts and machines; Utilisation de la thermodynamique de la detente dans les organes et les machines

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

This conference day was organized by the `thermodynamics` section of the French association of thermal engineers. This book of proceedings contains 11 papers entitled: `introduction talk`; `use of thermodynamics during expansion in valves in order to improve their behaviour`; `influence of the presence of impurities on the vapour condensation process during expansion inside a nozzle`; `excitations generated by flows during expansions`; `relief valves for refrigerating machineries`; `the influence of pressure losses in distribution systems over thermodynamic performances of the cryogenic pressure reducer and pneumatic engines`; `analysis of energy losses in turbine blades`; `humid vapor expansion in turbines`; `expansion of high temperature combustion gases in a turbine: influence of chemical reactivity`; `high expansion rate turbines`; `contribution of new calculation methods`. (J.S.)

Use of thermodynamics and expansion in parts and machines; Utilisation de la thermodynamique de la detente dans les organes et les machines

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-31

This conference day was organized by the `thermodynamics` section of the French association of thermal engineers. This book of proceedings contains 11 papers entitled: `introduction talk`; `use of thermodynamics during expansion in valves in order to improve their behaviour`; `influence of the presence of impurities on the vapour condensation process during expansion inside a nozzle`; `excitations generated by flows during expansions`; `relief valves for refrigerating machineries`; `the influence of pressure losses in distribution systems over thermodynamic performances of the cryogenic pressure reducer and pneumatic engines`; `analysis of energy losses in turbine blades`; `humid vapor expansion in turbines`; `expansion of high temperature combustion gases in a turbine: influence of chemical reactivity`; `high expansion rate turbines`; `contribution of new calculation methods`. (J.S.)

Feedback Conversations: Creating Feedback Dialogues with a New Textual Tool for Industrial Design Student Feedback

Science.gov (United States)

Funk, Mathias; van Diggelen, Migchiel

2017-01-01

In this paper, the authors describe how a study of a large database of written university teacher feedback in the department of Industrial Design led to the development of a new conceptual framework for feedback and the design of a new feedback tool. This paper focuses on the translation of related work in the area of feedback mechanisms for…

Effect of Strain on the Reactivity of Metal Surfaces

DEFF Research Database (Denmark)

Mavrikakis, Manos; Hammer, Bjørk; Nørskov, Jens Kehlet

1998-01-01

Self-consistent density functional calculations for the adsorption of O and CO, and the dissociation of CO on strained and unstrained Ru(0001) surfaces are used to show how strained metal surfaces have chemical properties that are significantly different from those of unstrained surfaces. Surface...... reactivity increases with lattice expansion, following a concurrent up-shift of the metal d states. Consequences for the catalytic activity of thin metal overlayers are discussed....

Value of large scale expansion of tumor infiltrating lymphocytes in a compartmentalised gas-permeable bag: interests for adoptive immunotherapy

Science.gov (United States)

2011-01-01

Background Adoptive cell therapy (ACT) has emerged as an effective treatment for patients with metastatic melanoma. However, there are several logistical and safety concerns associated with large-scale ex vivo expansion of tumour-specific T lymphocytes for widespread availability of ACT for cancer patients. To address these problems we developed a specific compartmentalised bag allowing efficient expansion of tumour-specific T lymphocytes in an easy handling, closed system. Methods Starting from lymph nodes from eight melanoma patients, we performed a side-by-side comparison of Tumour-Infiltrating Lymphocytes (TIL) produced after expansion in the compartmentalised bag versus TIL produced using the standard process in plates. Proliferation yield, viability, phenotype and IFNγ secretion were comparatively studied. Results We found no differences in proliferation yield and cell viability between both TIL production systems. Moreover, each of the cell products complied with our defined release criteria before being administered to the patient. The phenotype analysis indicated that the compartmentalised bag favours the expansion of CD8+ cells. Finally, we found that TIL stimulated in bags were enriched in reactive CD8+ T cells when co-cultured with the autologous melanoma cell line. Conclusions The stimulation of TIL with feeder cells in the specifically designed compartmentalised bag can advantageously replace the conventional protocol using plates. In particular, the higher expansion rate of reactive CD8+ T cells could have a significant impact for ACT. PMID:21575188

Feedback on Feedback: Eliciting Learners' Responses to Written Feedback through Student-Generated Screencasts

Science.gov (United States)

Fernández-Toro, María; Furnborough, Concha

2014-01-01

Despite the potential benefits of assignment feedback, learners often fail to use it effectively. This study examines the ways in which adult distance learners engage with written feedback on one of their assignments. Participants were 10 undergraduates studying Spanish at the Open University, UK. Their responses to feedback were elicited by means…

IMI's teaching design, feedback system and its localization

Science.gov (United States)

Wen, Tingting; Zhang, Xuexin

2017-08-01

In Britain, the Institute of the Motor Industry (IMI) sets the National Occupational Standards for all sectors of the automotive industry. The IMI certificate and associated training programs are well recognized for its high quality both in the United Kingdom (UK) and internationally. Using China's first groups studying IMI Level 3 certificate for teachers and Level 2 certificate for students as a sample, we analyzed the seven central aspects in IMI teaching, namely, assessment standard, environment, method, content, procedure, quality control and feedback. We then proposed strategies and guidelines for its localization in China, which would be particularly important for the establishment and expansion of IMI centers.

European Clearinghouse. Incidents related to reactivity management. Contributing factors, failure modes and corrective actions

International Nuclear Information System (INIS)

Bruynooghe, Christiane; Noel, Marc

2009-01-01

This work is part of the European Clearinghouse on Nuclear Power Plant Operational Experience Feedback (NPP-OEF) activity carried out at the Joint Research Centre/Institute for Energy (JRC/IE) with the participation of nine EU Regulatory Authorities. It investigates the 1999 Shika-1 criticality event together with other shortcomings in reactivity management reported to the IAE4 Incident Reporting System in the period 1981-2008. The aim of the work was to identify reactivity control failure modes, reactor status and corrective actions. Initiating factors and associated root causes were also analysed. Five of the 7 factors identified for all events were present in the 1999 Shika-1 event where criticality has been unexpectedly reached and maintained during 15 minutes. Most of the events resulted in changes in procedures, material or staff and management training. The analysis carried out put in evidence that in several instances appropriate communication based on operational experience feedback would have prevented incident to occur. This paper also summarises the action taken at power plants and by the regulatory bodies in different countries to avoid repetition of similar events. It identifies insights that might be useful to reduce the likelihood of operational events caused by shortcomings in reactivity management. (orig.)

About Politeness, Face, and Feedback: Exploring Resident and Faculty Perceptions of How Institutional Feedback Culture Influences Feedback Practices.

Science.gov (United States)

Ramani, Subha; Könings, Karen D; Mann, Karen V; Pisarski, Emily E; van der Vleuten, Cees P M

2018-03-06

To explore resident and faculty perspectives on what constitutes feedback culture, their perceptions of how institutional feedback culture (including politeness concepts) might influence the quality and impact of feedback, feedback seeking, receptivity, and readiness to engage in bidirectional feedback. Using a constructivist grounded theory approach, five focus group discussions with internal medicine residents, three focus group discussions with general medicine faculty, and eight individual interviews with subspecialist faculty were conducted at Brigham and Women's Hospital between April and December 2016. Discussions and interviews were audiotaped and transcribed verbatim; concurrent data collection and analysis were performed using the constant comparative approach. Analysis was considered through the lens of politeness theory and organizational culture. Twenty-nine residents and twenty-two general medicine faculty participated in focus group discussions, and eight subspecialty faculty participated in interviews. The institutional feedback culture was described by participants as: (1) a culture of politeness, in which language potentially damaging to residents' self-esteem was discouraged, and (2) a culture of excellence, in which the institution's outstanding reputation and pedigree of trainees inhibited constructive feedback. Three key themes situated within this broader cultural context were discovered: normalizing constructive feedback to promote a culture of growth, overcoming the mental block to feedback seeking, and hierarchical culture impeding bidirectional feedback. An institutional feedback culture of excellence and politeness may impede honest, meaningful feedback and may impact feedback seeking, receptivity, and bidirectional feedback exchanges. It is essential to understand the institutional feedback culture before it can be successfully changed.

Quantum mechanical algebraic variational methods for inelastic and reactive molecular collisions

Science.gov (United States)

Schwenke, David W.; Haug, Kenneth; Zhao, Meishan; Truhlar, Donald G.; Sun, Yan

1988-01-01

The quantum mechanical problem of reactive or nonreactive scattering of atoms and molecules is formulated in terms of square-integrable basis sets with variational expressions for the reactance matrix. Several formulations involving expansions of the wave function (the Schwinger variational principle) or amplitude density (a generalization of the Newton variational principle), single-channel or multichannel distortion potentials, and primitive or contracted basis functions are presented and tested. The test results, for inelastic and reactive atom-diatom collisions, suggest that the methods may be useful for a variety of collision calculations and may allow the accurate quantal treatment of systems for which other available methods would be prohibitively expensive.

How Attributes of the Feedback Message affect Subsequent Feedback Seeking: The interactive effects of feedback sign and type

OpenAIRE

Medvedeff, Megan; Gregory, Jane Brodie; Levy, Paul E

2008-01-01

In the current study, we examined the interactive effects of feedback type and sign on feedback-seeking behaviour, as well as the moderating role of regulatory focus. Using a behavioural measure of feedback seeking, we demonstrated a strong interaction between feedback type and sign, such that individuals subsequently sought the most feedback after they were provided with negative process feedback. Additionally, results suggested that an individual's chronic regulatory focus has implications ...

Water flooding criticality study for ZrH flight reactor

International Nuclear Information System (INIS)

Anderson, R.V.

1970-01-01

Five analytical criticality calculations were performed to study the effects of: (1) water reflecting only (no core flooding), (2) water reflection with 10 percent core flooding, (3) water reflection with 35 percent flooding, (4) water reflection plus complete core flooding, and (5) the negative reactivity feedback associated with rapid core expansion induced by a destructive transient. (U.S.)

Point kinetics modeling

International Nuclear Information System (INIS)

Kimpland, R.H.

1996-01-01

A normalized form of the point kinetics equations, a prompt jump approximation, and the Nordheim-Fuchs model are used to model nuclear systems. Reactivity feedback mechanisms considered include volumetric expansion, thermal neutron temperature effect, Doppler effect and void formation. A sample problem of an excursion occurring in a plutonium solution accidentally formed in a glovebox is presented

Simulation and study on reactivity disturbs dynamic character of HTR-10 nuclear power system

International Nuclear Information System (INIS)

Huang Xiaojin; Feng Yuankun

2002-01-01

In order to not only know 10 MW High Temperature Gas Cooled Reactor (HTR-10) nuclear power system's dynamic character more deeply but also to satisfy requirements of control system's design and analysis, the dynamic model of HTR-10 nuclear power system is established on the basis of dynamic model of HTR-10 nuclear system, which supplies turbine and generate electricity system model. Using this model, system's main variables' dynamic processes are simulated when control rod takes step reactivity disturb. The concussive progresses which is caused by reactivity disturb are analyzed. The results indicate that fuel temperature changing more slowly than nuclear power makes reactivity negative feedback not to restrain power changing, and then power concussive progress comes to being

Delayed coherent quantum feedback from a scattering theory and a matrix product state perspective

Science.gov (United States)

Guimond, P.-O.; Pletyukhov, M.; Pichler, H.; Zoller, P.

2017-12-01

We study the scattering of photons propagating in a semi-infinite waveguide terminated by a mirror and interacting with a quantum emitter. This paradigm constitutes an example of coherent quantum feedback, where light emitted towards the mirror gets redirected back to the emitter. We derive an analytical solution for the scattering of two-photon states, which is based on an exact resummation of the perturbative expansion of the scattering matrix, in a regime where the time delay of the coherent feedback is comparable to the timescale of the quantum emitter’s dynamics. We compare the results with numerical simulations based on matrix product state techniques simulating the full dynamics of the system, and extend the study to the scattering of coherent states beyond the low-power limit.

Feedbacks stablizing wetland geometry on a pattened landscape

Science.gov (United States)

Dong, X.; Heffernan, J. B.; Murray, A. B.

2017-12-01

Karst morphology is highly varied across different climatic and geologic regions of the world. Big Cypress National Preserve in SW Florida, features regularly distributed wetland depressions, located on exposed limestone bedrock. In this study, we explored the development of wetland depressions over the past 10kyrs of landscape formation. Specifically, we are interested in (1) whether the wetland depressions on the landscape have reached equilibrium size, and (2) if so, what are feedback mechanisms that contributed to stabilizing these depressions. We hypothesized three stabilizing feedback mechanisms. HYP1: increased size of depressions reduces landscape hydrological connectivity, which resulted in reduced landscape capacity to export dissolution products, hence lower weathering rate. HYP2: expansion of depression area increases tree biomass within the depression, which increased average evapotranspiration (ET) within the dome. The greater difference of ET rate between depression and upland leads to a lower water table in the depression. As a result, more subsurface water, carrying dissolved calcium, flows from catchment to depression. With lower export capacity and more calcium moving into the depression zones, rate of calcite precipitation increases, which lowers net weathering rate. HYP3: increasingly thicker sediment cover in the wetland depression over time decreases chemical transport capacity. This lowers both transport of CO2 from shallower soil to bedrock and transport of dissolution products from bedrock to surface. Both of these processes reduce bedrock-weathering rate. We built a 3-D numerical simulation model that partitioned the relative importance of different mechanisms. Preliminary results show that (1) there is an equilibrium size for wetland depressions for both radius and depth dimension; (2) current depressions are formed by coalescence of several nearby small depressions during development; (3) the soil cover feedback (HYP3) is the major

Feedback and Incentives

DEFF Research Database (Denmark)

Eriksson, Tor Viking; Poulsen, Anders; Villeval, Marie Claire

2009-01-01

This paper experimentally investigates the impact of different pay schemes and relative performance feedback policies on employee effort. We explore three feedback rules: no feedback on relative performance, feedback given halfway through the production period, and continuously updated feedback. ...... behind, and front runners do not slack off. But in both pay schemes relative performance feedback reduces the quality of the low performers' work; we refer to this as a "negative quality peer effect"....

THE IMPACT OF POWER COEFFICIENT OF REACTIVITY ON CANDU 6 REACTORS

Directory of Open Access Journals (Sweden)

D. KASTANYA

2013-10-01

Full Text Available The combined effects of reactivity coefficients, along with other core nuclear characteristics, determine reactor core behavior in normal operation and accident conditions. The Power Coefficient of Reactivity (PCR is an aggregate indicator representing the change in reactor core reactivity per unit change in reactor power. It is an integral quantity which captures the contributions of the fuel temperature, coolant void, and coolant temperature reactivity feedbacks. All nuclear reactor designs provide a balance between their inherent nuclear characteristics and the engineered reactivity control features, to ensure that changes in reactivity under all operating conditions are maintained within a safe range. The CANDU® reactor design takes advantage of its inherent nuclear characteristics, namely a small magnitude of reactivity coefficients, minimal excess reactivity, and very long prompt neutron lifetime, to mitigate the demand on the engineered systems for controlling reactivity and responding to accidents. In particular, CANDU reactors have always taken advantage of the small value of the PCR associated with their design characteristics, such that the overall design and safety characteristics of the reactor are not sensitive to the value of the PCR. For other reactor design concepts a PCR which is both large and negative is an important aspect in the design of their engineered systems for controlling reactivity. It will be demonstrated that during Loss of Regulation Control (LORC and Large Break Loss of Coolant Accident (LBLOCA events, the impact of variations in power coefficient, including a hypothesized larger than estimated PCR, has no safety-significance for CANDU reactor design. Since the CANDU 6 PCR is small, variations in the range of values for PCR on the performance or safety of the reactor are not significant.

The feed-back regulation of erythropoietin production in healthy humans

International Nuclear Information System (INIS)

Klausen, T.

1998-01-01

The proposed oxygen-dependent feed-back loop regulation of EPO (erythropoietin) production is mainly supported by data from studies in animals and cell cultures. The feed-back loop and its dependence on oxygen was therefore challenged by studies in healthy humans: Exposure of humans to different levels of acute and continued altitude hypobaria provided evidence for an oxygen dependence of the EPO response. This response is consistent with the proposed feed-back loop regulation of EPO production; Exposure to continued altitude hypobaria demonstrated that the decline in human EPO production is initiated before an EPO-induced erythopoiesis is detectable, and that this decline is related to a concomitant decrease in the haemoglobin-oxygen affinity. Contrary to the feed-back loop, this time-relation indicate that the feed-back regulation of EPO production during continued hypobaric hypoxia is exerted primarily through a decrease in the haemoglobin-oxygen affinity, rather than by the effects of an EPO-stimulated erythropoiesis; Increased circulating levels of the proinflammatory cytokine IL-6 was found in healthy humans during four days of altitude exposure as compared with sea level. The other proinflammatory cytokines IL-1 beta, and TNF alpha remained unchanged, and the increased serum IL-6 did not induce production of c-reactive protein; Comparable circadian variations in human EPO production were shown in sedentary subjects, athletes, and healthy but hypoxaemic subjects. Human EPO production could not be triggered by one hour of high-intensity exercise, whereas longitudinal changes in exercise showed a trend of relation between human EPO production, serum concentration of free testosterone, and indices of body composition. These results have demonstrated and endogenous, probably hormonal, and oxygen-independent regulation of human EPO production, which is at variance with the oxygen dependent feed-back loop regulation of EPO production. Conclusively, the present

Feedback components of a U20Pu10Zr-fueled compared to a U10Zr-fueled EBR-II

International Nuclear Information System (INIS)

Meneghetti, D.; Kucera, D.A.

1988-01-01

Calculated feedback components of the regional contributions of the power reactivity decrements (PRDs) and of the temperature coefficients of reactivity of a U20Pu10Zr-fueled and of a U10Zr-fueled Experimental Breeder Reactor II (EBR-II) are compared. The PRD components are also separated into power-to-flow dependent and solely power dependent parts. The effects of these values upon quantities useful for indicating the comparative potential inherent safety characteristics of these EBR-II loadings are presented

Predictive and Reactive Locomotor Adaptability in Healthy Elderly: A Systematic Review and Meta-Analysis.

Science.gov (United States)

Bohm, Sebastian; Mademli, Lida; Mersmann, Falk; Arampatzis, Adamantios

2015-12-01

Locomotor adaptability is based on the implementation of error-feedback information from previous perturbations to predictively adapt to expected perturbations (feedforward) and to facilitate reactive responses in recurring unexpected perturbations ('savings'). The effect of aging on predictive and reactive adaptability is yet unclear. However, such understanding is fundamental for the design and application of effective interventions targeting fall prevention. We systematically searched the Web of Science, MEDLINE, Embase and Science Direct databases as well as the reference lists of the eligible articles. A study was included if it addressed an investigation of the locomotor adaptability in response to repeated mechanical movement perturbations of healthy older adults (≥60 years). The weighted average effect size (WAES) of the general adaptability (adaptive motor responses to repeated perturbations) as well as predictive (after-effects) and reactive adaptation (feedback responses to a recurring unexpected perturbation) was calculated and tested for an overall effect. A subgroup analysis was performed regarding the factor age group [i.e., young (≤35 years) vs. older adults]. Furthermore, the methodological study quality was assessed. The review process yielded 18 studies [1009 participants, 613 older adults (70 ± 4 years)], which used various kinds of locomotor tasks and perturbations. The WAES for the general locomotor adaptability was 1.21 [95% confidence interval (CI) 0.68-1.74, n = 11] for the older and 1.39 (95% CI 0.90-1.89, n = 10) for the young adults with a significant (p locomotor adaptability in general and predictive and reactive adaptation in particular remain highly effective in the elderly, showing only minor, not statistically significant age-related deficits. Consequently, interventions which use adaptation and learning paradigms including the application of the mechanisms responsible for an effective predictive and reactive dynamic stability

Engineered artificial antigen presenting cells facilitate direct and efficient expansion of tumor infiltrating lymphocytes

Directory of Open Access Journals (Sweden)

Coukos George

2011-08-01

Full Text Available Abstract Background Development of a standardized platform for the rapid expansion of tumor-infiltrating lymphocytes (TILs with anti-tumor function from patients with limited TIL numbers or tumor tissues challenges their clinical application. Methods To facilitate adoptive immunotherapy, we applied genetically-engineered K562 cell-based artificial antigen presenting cells (aAPCs for the direct and rapid expansion of TILs isolated from primary cancer specimens. Results TILs outgrown in IL-2 undergo rapid, CD28-independent expansion in response to aAPC stimulation that requires provision of exogenous IL-2 cytokine support. aAPCs induce numerical expansion of TILs that is statistically similar to an established rapid expansion method at a 100-fold lower feeder cell to TIL ratio, and greater than those achievable using anti-CD3/CD28 activation beads or extended IL-2 culture. aAPC-expanded TILs undergo numerical expansion of tumor antigen-specific cells, remain amenable to secondary aAPC-based expansion, and have low CD4/CD8 ratios and FOXP3+ CD4+ cell frequencies. TILs can also be expanded directly from fresh enzyme-digested tumor specimens when pulsed with aAPCs. These "young" TILs are tumor-reactive, positively skewed in CD8+ lymphocyte composition, CD28 and CD27 expression, and contain fewer FOXP3+ T cells compared to parallel IL-2 cultures. Conclusion Genetically-enhanced aAPCs represent a standardized, "off-the-shelf" platform for the direct ex vivo expansion of TILs of suitable number, phenotype and function for use in adoptive immunotherapy.

Perceived Insider Status and Feedback Reactions: A Dual Path of Feedback Motivation Attribution

Directory of Open Access Journals (Sweden)

Weijiong Wu

2017-05-01

Full Text Available Many studies have evaluated how the characteristics of feedback receiver, feedback deliverer and feedback information influence psychological feedback reactions of the feedback receiver while largely neglecting that feedback intervention is a kind of social interaction process. To address this issue, this study proposes that employees’ perceived insider status (PIS, as a kind of employee-organization relationship, could also influence employees’ reactions to supervisory feedback. In particular, this study investigates the influence of PIS focusing on affective and cognitive feedback reactions, namely feedback satisfaction and feedback utility. Surveys were conducted in a machinery manufacturing company in the Guangdong province of China. Samples were collected from 192 employees. Data analysis demonstrated that PIS and feedback utility possessed a U-shaped relationship, whereas PIS and feedback satisfaction exhibited positively linear relationships. The analysis identified two kinds of mediating mechanisms related to feedback satisfaction and feedback utility. Internal feedback motivation attribution partially mediated the relationship between PIS and feedback satisfaction but failed to do the same with respect to the relationship between PIS and feedback utility. In contrast, external feedback motivation attribution partially mediated the relationship between PIS and feedback utility while failing to mediate the relationship between PIS and feedback satisfaction. Theoretical contributions and practical implications of the findings are discussed at the end of the paper.

Multiple greenhouse-gas feedbacks from the land biosphere under future climate change scenarios

Science.gov (United States)

Stocker, Benjamin D.; Roth, Raphael; Joos, Fortunat; Spahni, Renato; Steinacher, Marco; Zaehle, Soenke; Bouwman, Lex; Xu-Ri; Prentice, Iain Colin

2013-07-01

Atmospheric concentrations of the three important greenhouse gases (GHGs) CO2, CH4 and N2O are mediated by processes in the terrestrial biosphere that are sensitive to climate and CO2. This leads to feedbacks between climate and land and has contributed to the sharp rise in atmospheric GHG concentrations since pre-industrial times. Here, we apply a process-based model to reproduce the historical atmospheric N2O and CH4 budgets within their uncertainties and apply future scenarios for climate, land-use change and reactive nitrogen (Nr) inputs to investigate future GHG emissions and their feedbacks with climate in a consistent and comprehensive framework. Results suggest that in a business-as-usual scenario, terrestrial N2O and CH4 emissions increase by 80 and 45%, respectively, and the land becomes a net source of C by AD 2100. N2O and CH4 feedbacks imply an additional warming of 0.4-0.5°C by AD 2300; on top of 0.8-1.0°C caused by terrestrial carbon cycle and Albedo feedbacks. The land biosphere represents an increasingly positive feedback to anthropogenic climate change and amplifies equilibrium climate sensitivity by 22-27%. Strong mitigation limits the increase of terrestrial GHG emissions and prevents the land biosphere from acting as an increasingly strong amplifier to anthropogenic climate change.

Feedback on Feedback--Does It Work?

Science.gov (United States)

Speicher, Oranna; Stollhans, Sascha

2015-01-01

It is well documented that providing assessment feedback through the medium of screencasts is favourably received by students and encourages deeper engagement with the feedback given by the language teacher (inter alia Abdous & Yoshimura, 2010; Brick & Holmes, 2008; Cann, 2007; Stannard, 2007). In this short paper we will report the…

On the influence of shrub height and expansion on northern high latitude climate

International Nuclear Information System (INIS)

Bonfils, C J W; Phillips, T J; Cameron-Smith, P; Lawrence, D M; Riley, W J; Subin, Z M

2012-01-01

There is a growing body of empirical evidence documenting the expansion of shrub vegetation in the circumpolar Arctic in response to climate change. Here, we conduct a series of idealized experiments with the Community Climate System Model to analyze the potential impact on boreal climate of a large-scale tundra-to-shrub conversion. The model responds to an increase in shrub abundance with substantial atmospheric heating arising from two seasonal land–atmosphere feedbacks: a decrease in surface albedo and an evapotranspiration-induced increase in atmospheric moisture content. We demonstrate that the strength and timing of these feedbacks are sensitive to shrub height and the time at which branches and leaves protrude above the snow. Taller and aerodynamically rougher shrubs lower the albedo earlier in the spring and transpire more efficiently than shorter shrubs. These mechanisms increase, in turn, the strength of the indirect sea-ice albedo and ocean evaporation feedbacks contributing to additional regional warming. Finally, we find that an invasion of tall shrubs tends to systematically warm the soil, deepen the active layer, and destabilize the permafrost (with increased formation of taliks under a future scenario) more substantially than an invasion of short shrubs. (letter)

Identification of nuclear plant temperatures. Feedback parameters using experimental data

International Nuclear Information System (INIS)

Abdel Hamid, Sayed.

1981-09-01

This work is concerned with the identification of the fuel and moderator reactivity feedback coefficients of a Pressurized Water Reactor (PWR) using actual measurements. The main aim of this study is to examine the possibility to use a simplified model representing the reactor dynamics, which can be simulated on minicomputer and to supply an identification algorithm to get the feedback coefficients of PWR. The theoretical model of a PWR is built from the space independent reactor kinetics equation associated with six delayed neutron groups equations, as well as twelve equations describe the heat balance for the fuel and the moderator inside the reactor core, assuming that the core is composed from six successive axial zones. The reactor is externally perturbed by moving its control rods, and the corresponding changes in power and temperatures are recorded. The mathematical model has been solved numerically using fifth order Runge-Kutta integration technique by special developed package using Solar 16-40 computer (64 K memory size). As an identification algorithm, the Nelder-Mead Simplex method has been used to minimize the sum of the squares of the differences between measured and calculated reactor power. Hence, the feedback coefficients have been identified from off-line calculations

Self-healing of drying shrinkage cracks in cement-based materials incorporating reactive MgO

Science.gov (United States)

Qureshi, T. S.; Al-Tabbaa, A.

2016-08-01

Excessive drying shrinkage is one of the major issues of concern for longevity and reduced strength performance of concrete structures. It can cause the formation of cracks in the concrete. This research aims to improve the autogenous self-healing capacity of traditional Portland cement (PC) systems, adding expansive minerals such as reactive magnesium oxide (MgO) in terms of drying shrinkage crack healing. Two different reactive grades (high ‘N50’and moderately high ‘92-200’) of MgO were added with PC. Cracks were induced in the samples with restraining end prisms through natural drying shrinkage over 28 days after casting. Samples were then cured under water for 28 and 56 days, and self-healing capacity was investigated in terms of mechanical strength recovery, crack sealing efficiency and improvement in durability. Finally, microstructures of the healing materials were investigated using FT-IR, XRD, and SEM-EDX. Overall N50 mixes show higher expansion and drying shrinkage compared to 92-200 mixes. Autogenous self-healing performance of the MgO containing samples were much higher compared to control (only PC) mixes. Cracks up to 500 μm were sealed in most MgO containing samples after 28 days. In the microstructural investigations, highly expansive Mg-rich hydro-carbonate bridges were found along with traditional calcium-based, self-healing compounds (calcite, portlandite, calcium silicate hydrates and ettringite).

Bayesian feedback versus Markovian feedback in a two-level atom

International Nuclear Information System (INIS)

Wiseman, H.M.; Mancini, Stefano; Wang Jin

2002-01-01

We compare two different approaches to the control of the dynamics of a continuously monitored open quantum system. The first is Markovian feedback, as introduced in quantum optics by Wiseman and Milburn [Phys. Rev. Lett. 70, 548 (1993)]. The second is feedback based on an estimate of the system state, developed recently by Doherty and Jacobs [Phys. Rev. A 60, 2700 (1999)]. Here we choose to call it, for brevity, Bayesian feedback. For systems with nonlinear dynamics, we expect these two methods of feedback control to give markedly different results. The simplest possible nonlinear system is a driven and damped two-level atom, so we choose this as our model system. The monitoring is taken to be homodyne detection of the atomic fluorescence, and the control is by modulating the driving. The aim of the feedback in both cases is to stabilize the internal state of the atom as close as possible to an arbitrarily chosen pure state, in the presence of inefficient detection and other forms of decoherence. Our results (obtained without recourse to stochastic simulations) prove that Bayesian feedback is never inferior, and is usually superior, to Markovian feedback. However, it would be far more difficult to implement than Markovian feedback and it loses its superiority when obvious simplifying approximations are made. It is thus not clear which form of feedback would be better in the face of inevitable experimental imperfections

Interpreting Feedback: A Discourse Analysis of Teacher Feedback and Student Identity

Science.gov (United States)

Torres, J. T.; Anguiano, Carlos J.

2016-01-01

Feedback has typically been studied as a means of improving academic performance. Few studies inquire into the processes by which feedback shapes student identity. The authors carry out a discourse analysis of written comments to explore how feedback is discursively constructed by both teachers and students. Analysis of written feedback,…

Analysis of multiple failure accident scenarios for development of probabilistic safety assessment model for KALIMER-600

International Nuclear Information System (INIS)

Kim, T.W.; Suk, S.D.; Chang, W.P.; Kwon, Y.M.; Jeong, H.Y.; Lee, Y.B.; Ha, K.S.; Kim, S.J.

2009-01-01

A sodium-cooled fast reactor (SFR), KALIMER-600, is under development at KAERI. Its fuel is the metal fuel of U-TRU-Zr and it uses sodium as coolant. Its advantages are found in the aspects of an excellent uranium resource utilization, inherent safety features, and nonproliferation. The probabilistic safety assessment (PSA) will be one of the initiating subjects for designing it from the aspects of a risk informed design (RID) as well as a technology-neutral licensing (TNL). The core damage is defined as coolant voiding, fuel melting, or cladding damage. Accident scenarios which lead to the core damage should be identified for the development of a Level-1 PSA model. The SSC-K computer code is used to identify the conditions which lead to core damage. KALIMER-600 has passive safety features such as passive shutdown functions, passive pump coast-down features, and passive decay heat removal systems. It has inherent reactivity feedback effects such as Doppler, sodium void, core axial expansion, control rod axial expansion, core radial expansion, etc. The accidents which are analyzed are the multiple failure accidents such as an unprotected transient overpower, a loss of flow, and a loss of heat sink events with degraded safety systems or functions. The safety functions to be considered here are a reactor trip, inherent reactivity feedback features, the pump coast-down, and the passive decay heat removal. (author)

Study of the IPR-R1 dynamics by means of reactivity pseudo-aleatory excitations

International Nuclear Information System (INIS)

Roedel, G.

1983-01-01

Aiming to demonstrate the feasibility of using the reactor noise neutronic analysis tecniques a dynamic model was developed for the IPR-R1 reactor at CDTN. This model allows reactivity feedback, due to the variations of fuel and coolant temperature. The system was excited by the variations of reactivity modulated by a pseudo aleatory binary sequence and its answer was measured by means of the fluctuactions dround the stationary power. The model developed and the technique used was tested, and the values of the system parameters obtained from the adjustment of the theoretical and experimental transfer function were compared to another, obtained from independent process. (E.G.) [pt

Sensitivity analysis of power excursion in RSG-GAS reactor due to reactivity insertion

International Nuclear Information System (INIS)

Pinem, Surian; Sembiring, Tagor Malem

2002-01-01

Reactor kinetics has a very important role in reactor operation safety and nuclear reactor control. One of the important aspects in reactor kinetics is power behavior as function of time due to chain reaction in the core. The calculation was performed using kinetic equation and feedback reactivity and evaluated using static power coefficient. Analysis was performed for oxide 250 g, silicide 250 g and silicide 300 g fuel elements with insertion of positive reactivity, negative reactivity and reactivity close to delay neutron fraction. The calculation of power excursion sensitivity showed that the insertion of 0,5 % Δk/k, in the fuel element of silicide 300 g is bigger 5 % than the one of oxide 250 g or silicide 250 g. If inserted by - 1,2 % Δk/k, there is no change among three fuel elements. Therefore, in kinetic point of view, it is showed there is no significant influence in the RSG-GAS reactor operation safety is the current core of oxide 250 g is converted to silicide 250 g or to silicide 300 g

Feedback på arbejdspladser

DEFF Research Database (Denmark)

Holdt Christensen, Peter

Feedback på arbejdspladser er vigtig. Men feedback er også et populært begreb mange taler med om uden dog at vide sig helt sikker på hvad det er. Formålet med denne bog er at bidrage til en bedre forståelse af hvad feedback er, hvordan det fungerer og dermed hvordan arbejdspladser bedst muligt bør...... understøtte feedback. Med udgangspunkt i forskningen identificeres centrale udfordringer ved feedback, bl.a. hvorfor det kan være svært at give præcis feedback, hvordan forholdet mellem lederen og den ansatte påvirker den feedback der gives, og hvad der kendetegner en feedback kultur. Bogen er skrevet til...... undervisere og studerende på videregående uddannelser samt praktikere der ønsker en systematisk og forskningsbaseret forståelse af feedback på arbejdspladser. Bogen er således ikke en kogebog til bedre feedback, men en analyse og diskussion af hvad forskningen ved om feedback, og bidrager med inspiration og...

Analytical determination of the bifurcation thresholds in stochastic differential equations with delayed feedback.

Science.gov (United States)

Gaudreault, Mathieu; Drolet, François; Viñals, Jorge

2010-11-01

Analytical expressions for pitchfork and Hopf bifurcation thresholds are given for a nonlinear stochastic differential delay equation with feedback. Our results assume that the delay time τ is small compared to other characteristic time scales, not a significant limitation close to the bifurcation line. A pitchfork bifurcation line is found, the location of which depends on the conditional average , where x(t) is the dynamical variable. This conditional probability incorporates the combined effect of fluctuation correlations and delayed feedback. We also find a Hopf bifurcation line which is obtained by a multiple scale expansion around the oscillatory solution near threshold. We solve the Fokker-Planck equation associated with the slowly varying amplitudes and use it to determine the threshold location. In both cases, the predicted bifurcation lines are in excellent agreement with a direct numerical integration of the governing equations. Contrary to the known case involving no delayed feedback, we show that the stochastic bifurcation lines are shifted relative to the deterministic limit and hence that the interaction between fluctuation correlations and delay affect the stability of the solutions of the model equation studied.

Simulating the Range Expansion of Spartina alterniflora in Ecological Engineering through Constrained Cellular Automata Model and GIS

Directory of Open Access Journals (Sweden)

Zongsheng Zheng

2015-01-01

Full Text Available Environmental factors play an important role in the range expansion of Spartina alterniflora in estuarine salt marshes. CA models focusing on neighbor effect often failed to account for the influence of environmental factors. This paper proposed a CCA model that enhanced CA model by integrating constrain factors of tidal elevation, vegetation density, vegetation classification, and tidal channels in Chongming Dongtan wetland, China. Meanwhile, a positive feedback loop between vegetation and sedimentation was also considered in CCA model through altering the tidal accretion rate in different vegetation communities. After being validated and calibrated, the CCA model is more accurate than the CA model only taking account of neighbor effect. By overlaying remote sensing classification and the simulation results, the average accuracy increases to 80.75% comparing with the previous CA model. Through the scenarios simulation, the future of Spartina alterniflora expansion was analyzed. CCA model provides a new technical idea and method for salt marsh species expansion and control strategies research.

Using Feedback to Promote Physical Activity: The Role of the Feedback Sign.

Science.gov (United States)

Kramer, Jan-Niklas; Kowatsch, Tobias

2017-06-02

Providing feedback is a technique to promote health behavior that is emphasized by behavior change theories. However, these theories make contradicting predictions regarding the effect of the feedback sign-that is, whether the feedback signals success or failure. Thus, it is unclear whether positive or negative feedback leads to more favorable behavior change in a health behavior intervention. The aim of this study was to examine the effect of the feedback sign in a health behavior change intervention. Data from participants (N=1623) of a 6-month physical activity intervention was used. Participants received a feedback email at the beginning of each month. Feedback was either positive or negative depending on the participants' physical activity in the previous month. In an exploratory analysis, change in monthly step count averages was used to evaluate the feedback effect. The feedback sign did not predict the change in monthly step count averages over the course of the intervention (b=-84.28, P=.28). Descriptive differences between positive and negative feedback can be explained by regression to the mean. The feedback sign might not influence the effect of monthly feedback emails sent out to participants of a large-scale physical activity intervention. However, randomized studies are needed to further support this conclusion. Limitations as well as opportunities for future research are discussed. ©Jan-Niklas Kramer, Tobias Kowatsch. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 02.06.2017.

A highly accurate benchmark for reactor point kinetics with feedback

International Nuclear Information System (INIS)

Ganapol, B. D.; Picca, P.

2010-10-01

This work apply the concept of convergence acceleration, also known as extrapolation, to find the solution to the reactor kinetics equations describing nuclear reactor transients. The method features simplicity in that an approximate finite difference formulation is constructed and converged to high accuracy from knowledge of how the error term behaves. Through Rom berg extrapolation, we demonstrate its high accuracy for a variety of imposed reactivity insertions found in the literature as well as nonlinear temperature and fission product feedback. A unique feature of the proposed method, called RKE/R(om berg) algorithm, is interval bisection to ensure high accuracy. (Author)

TRACE analysis of Phenix core response to an increase of the core inlet sodium temperature

Energy Technology Data Exchange (ETDEWEB)

Chenu, A., E-mail: aurelia.chenu@psi.ch [Paul Scherrer Inst., Villigen PSI (Switzerland); Ecole Polytechnique Federale (Switzerland); Mikityuk, K., E-mail: konstantin.mikityuk@psi.ch [Paul Scherrer Inst., Villigen PSI (Switzerland); Adams, R., E-mail: robert.adams@psi.ch [Paul Scherrer Inst., Villigen PSI (Switzerland); Eidgenossische Technische Hochschule, Zurich (Switzerland); Chawla, R., E-mail: rakesh.chawla@epfl.ch [Paul Scherrer Inst., Villigen PSI (Switzerland); Ecole Polytechnique Federale (Switzerland)

2011-07-01

This work presents the analysis, using the TRACE code, of the Phenix core response to an inlet sodium temperature increase. The considered experiment was performed in the frame of the Phenix End-Of-Life (EOL) test program of the CEA, prior to the final shutdown of the reactor. It corresponds to a transient following a 40°C increase of the core inlet temperature, which leads to a power decrease of 60%. This work focuses on the first phase of the transient, prior to the reactor scram and pump trip. First, the thermal-hydraulic TRACE model of the core developed for the present analysis is described. The kinetic parameters and feedback coefficients for the point kinetic model were first derived from a 3D static neutronic ERANOS model developed in a former study. The calculated kinetic parameters were then optimized, before use, on the basis of the experimental reactivity in order to minimize the error on the power calculation. The different reactivity feedbacks taken into account include various expansion mechanisms that have been specifically implemented in TRACE for analysis of fast-neutron spectrum systems. The point kinetic model has been used to study the sensitivity of the core response to the different feedback effects. The comparison of the calculated results with the experimental data reveals the need to accurately calculate the reactivity feedback coefficients. This is because the reactor response is very sensitive to small reactivity changes. This study has enabled us to study the sensitivity of the power change to the different reactivity feedbacks and define the most important parameters. As such, it furthers the validation of the FAST code system, which is being used to gain a more in-depth understanding of SFR core behavior during accidental transients. (author)

Thermal expansion

International Nuclear Information System (INIS)

Yun, Y.

2015-01-01

Thermal expansion of fuel pellet is an important property which limits the lifetime of the fuels in reactors, because it affects both the pellet and cladding mechanical interaction and the gap conductivity. By fitting a number of available measured data, recommended equations have been presented and successfully used to estimate thermal expansion coefficient of the nuclear fuel pellet. However, due to large scatter of the measured data, non-consensus data have been omitted in formulating the equations. Also, the equation is strongly governed by the lack of appropriate experimental data. For those reasons, it is important to develop theoretical methodologies to better describe thermal expansion behaviour of nuclear fuel. In particular, first-principles and molecular dynamics simulations have been certainly contributed to predict reliable thermal expansion without fitting the measured data. Furthermore, the two theoretical techniques have improved on understanding the change of fuel dimension by describing the atomic-scale processes associated with lattice expansion in the fuels. (author)

Low-temperature thermal expansion

International Nuclear Information System (INIS)

Collings, E.W.

1986-01-01

This chapter discusses the thermal expansion of insulators and metals. Harmonicity and anharmonicity in thermal expansion are examined. The electronic, magnetic, an other contributions to low temperature thermal expansion are analyzed. The thermodynamics of the Debye isotropic continuum, the lattice-dynamical approach, and the thermal expansion of metals are discussed. Relative linear expansion at low temperatures is reviewed and further calculations of the electronic thermal expansion coefficient are given. Thermal expansions are given for Cu, Al and Ti. Phenomenologic thermodynamic relationships are also discussed

Thoracic ROM measurement system with visual bio-feedback: system design and biofeedback evaluation.

Science.gov (United States)

Ando, Takeshi; Kawamura, Kazuya; Fujitani, Junko; Koike, Tomokazu; Fujimoto, Masashi; Fujie, Masakatsu G

2011-01-01

Patients with diseases such as chronic obstructive pulmonary disease (COPD) need to improve their thorax mobility. Thoracic ROM is one of the simplest and most useful indexes to evaluate the respiratory function. In this paper, we have proposed the prototype of a simple thoracic ROM measurement system with real-time visual bio-feedback in the chest expansion test. In this system, the thoracic ROM is measured using a wire-type linear encoder whose wire is wrapped around the thorax. In this paper, firstly, the repeatability and reliability of measured thoracic ROM was confirmed as a first report of the developed prototype. Secondly, we analyzed the effect of the bio-feedback system on the respiratory function. The result of the experiment showed that it was easier to maintain a large and stable thoracic ROM during deep breathing by using the real-time visual biofeedback system of the thoracic ROM.

Solution of the neutron point kinetics equations with temperature feedback effects applying the polynomial approach method

International Nuclear Information System (INIS)

Tumelero, Fernanda; Petersen, Claudio Z.; Goncalves, Glenio A.; Lazzari, Luana

2015-01-01

In this work, we present a solution of the Neutron Point Kinetics Equations with temperature feedback effects applying the Polynomial Approach Method. For the solution, we consider one and six groups of delayed neutrons precursors with temperature feedback effects and constant reactivity. The main idea is to expand the neutron density, delayed neutron precursors and temperature as a power series considering the reactivity as an arbitrary function of the time in a relatively short time interval around an ordinary point. In the first interval one applies the initial conditions of the problem and the analytical continuation is used to determine the solutions of the next intervals. With the application of the Polynomial Approximation Method it is possible to overcome the stiffness problem of the equations. In such a way, one varies the time step size of the Polynomial Approach Method and performs an analysis about the precision and computational time. Moreover, we compare the method with different types of approaches (linear, quadratic and cubic) of the power series. The answer of neutron density and temperature obtained by numerical simulations with linear approximation are compared with results in the literature. (author)

Solution of the neutron point kinetics equations with temperature feedback effects applying the polynomial approach method

Energy Technology Data Exchange (ETDEWEB)

Tumelero, Fernanda, E-mail: fernanda.tumelero@yahoo.com.br [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica; Petersen, Claudio Z.; Goncalves, Glenio A.; Lazzari, Luana, E-mail: claudiopeteren@yahoo.com.br, E-mail: gleniogoncalves@yahoo.com.br, E-mail: luana-lazzari@hotmail.com [Universidade Federal de Pelotas (DME/UFPEL), Capao do Leao, RS (Brazil). Instituto de Fisica e Matematica

2015-07-01

In this work, we present a solution of the Neutron Point Kinetics Equations with temperature feedback effects applying the Polynomial Approach Method. For the solution, we consider one and six groups of delayed neutrons precursors with temperature feedback effects and constant reactivity. The main idea is to expand the neutron density, delayed neutron precursors and temperature as a power series considering the reactivity as an arbitrary function of the time in a relatively short time interval around an ordinary point. In the first interval one applies the initial conditions of the problem and the analytical continuation is used to determine the solutions of the next intervals. With the application of the Polynomial Approximation Method it is possible to overcome the stiffness problem of the equations. In such a way, one varies the time step size of the Polynomial Approach Method and performs an analysis about the precision and computational time. Moreover, we compare the method with different types of approaches (linear, quadratic and cubic) of the power series. The answer of neutron density and temperature obtained by numerical simulations with linear approximation are compared with results in the literature. (author)

Phase transition and thermal expansion studies of alumina thin films prepared by reactive pulsed laser deposition.

Science.gov (United States)

Balakrishnan, G; Thirumurugesan, R; Mohandas, E; Sastikumar, D; Kuppusami, P; Songl, J I

2014-10-01

Aluminium oxide (Al2O3) thin films were deposited on Si (100) substrates at an optimized oxygen partial pressure of 3 x 10(-3) mbar at room temperature by pulsed laser deposition (PLD). The films were characterized by high temperature X-ray diffraction (HTXRD), field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The HTXRD pattern showed the cubic y-Al2O3 phase in the temperature range 300-973 K. At temperatures ≥ 1073 K, the δ and θ-phases of Al2O3 were observed. The mean linear thermal expansion coefficient and volume thermal expansion coefficient of γ-Al2O3 was found to be 12.66 x 10(-6) K(-1) and 38.87 x 10(-6) K(-1) in the temperature range 300 K-1073 K. The field emission scanning electron microscopy revealed a smooth and structureless morphology of the films deposited on Si (100). The atomic force microscopy study indicated the increased crystallinity and surface roughness of the films after annealing at high temperature.

Stationary liquid fuel fast reactor SLFFR — Part II: Safety analysis

Energy Technology Data Exchange (ETDEWEB)

Jing, T.; Jung, Y.S.; Yang, W.S., E-mail: yang494@purdue.edu

2016-12-15

Highlights: • A multi-channel safety analysis code named MUSA is developed for SLFFR transient analyses. • MUSA is verified against the SYS4A/SASSYS-1 code by simulating the ULOF accident for the advanced burner test reactor. • It is shown that SLFFR has a passive shutdown capability for double-fault, beyond-design-basis accidents UTOP, ULOHS and ULOF. - Abstract: Safety characteristics have been evaluated for the stationary liquid fuel fast reactor (SLFFR) proposed for effective burning of hazardous TRU elements of used nuclear fuel. In order to model the geometrical configuration and reactivity feedback mechanisms unique to SLFFR, a multi-channel safety analysis code named MUSA was developed. MUSA solves the time-dependent coupled neutronics and thermal-fluidic problems. The thermal-fluidic behavior of the core is described by representing the core with one-dimensional parallel channels. The primary heat transport system is modeled by connecting compressible volumes by liquid segments. A point kinetics model with six delayed neutron groups is used to represent the fission power transients. The reactivity feedback is estimated by combining the temperature and density variations of liquid fuel, structural material and sodium coolant with the corresponding axial distributions of reactivity worth in each individual thermal-fluidic channel. Preliminary verification tests with a conventional solid fuel reactor agreed well with the reference solutions obtained with the SAS4A/SASSYS-1 code. Transient analyses of SLFFR were performed for unprotected transient over-power (UTOP), unprotected loss of heat sink (ULOHS) and unprotected loss of flow (ULOF) accidents. The results showed that the thermal expansion of liquid fuel provides sufficiently large negative feedback reactivity for passive shutdown of UTOP and ULOHS. The ULOF transient is also terminated passively with the negative reactivity introduced by the gas expansion modules installed at the core periphery

Effects of Informative and Confirmatory Feedback on Brain Activation During Negative Feedback Processing

Directory of Open Access Journals (Sweden)

Yeon-Kyoung eWoo

2015-06-01

Full Text Available The current study compared the effects of informative and confirmatory feedback on brain activation during negative feedback processing. For confirmatory feedback trials, participants were informed that they had failed the task, whereas informative feedback trials presented task relevant information along with the notification of their failure. Fourteen male undergraduates performed a series of spatial-perceptual tasks and received feedback while their brain activity was recorded. During confirmatory feedback trials, greater activations in the amygdala, dorsal anterior cingulate cortex, and the thalamus (including the habenular were observed in response to incorrect responses. These results suggest that confirmatory feedback induces negative emotional reactions to failure. In contrast, informative feedback trials elicited greater activity in the dorsolateral prefrontal cortex (DLPFC when participants experienced failure. Further psychophysiological interaction (PPI analysis revealed a negative coupling between the DLPFC and the amygdala during informative feedback relative to confirmatory feedback trials. These findings suggest that providing task-relevant information could facilitate implicit down-regulation of negative emotions following failure.

Rateless feedback codes

DEFF Research Database (Denmark)

Sørensen, Jesper Hemming; Koike-Akino, Toshiaki; Orlik, Philip

2012-01-01

This paper proposes a concept called rateless feedback coding. We redesign the existing LT and Raptor codes, by introducing new degree distributions for the case when a few feedback opportunities are available. We show that incorporating feedback to LT codes can significantly decrease both...... the coding overhead and the encoding/decoding complexity. Moreover, we show that, at the price of a slight increase in the coding overhead, linear complexity is achieved with Raptor feedback coding....

Salton and Buckley’s Landmark Research in Experimental Text Information Retrieval. A Review of: Salton, G., & Buckley, C. (1990. Improving retrieval performance by relevance feedback. Journal of the American Society for Information Science, 41(4, 288–297.

Directory of Open Access Journals (Sweden)

Christine F. Marton

2011-01-01

Full Text Available Objectives – To compare the performance of the vector space model and the probabilistic weighting model of relevance feedback for the overall purpose of determining the most useful relevance feedback procedures. The amount of improvement that can be obtained from searching several test document collections with only one feedback iteration of each relevance feedback model was measured.Design – The experimental design consisted of 72 different tests: 2 different relevance feedback methods, each with 6 permutations, on 6 test document collections of various sizes. A residual collection method was utilized to ascertain the “true advantage provided by the relevance feedback process.” (Salton & Buckley, 1990, p. 293Setting – Department of Computer Science at Cornell University.Subjects – Six test document collections.Methods – Relevance feedback is an effective technique for query modification that provides significant improvement in search performance. Relevance feedback entails both “term reweighting,” the modification of term weights based on term use in retrieved relevant and non-relevant documents, and “query expansion,” which is the addition of new terms from relevant documents retrieved (Harman, 1992. Salton and Buckley (1990 evaluated two established relevance feedback models based on the vector space model (a spatial model and the probabilistic model, respectively. Harman (1992 describes the two key differences between these competing models of relevance feedback.[The vector space model merges] document vectors and original query vectors. This automatically reweights query terms by adding the weights from the actual occurrence of those query terms in the relevant documents, and subtracting the weights of those terms occurring in the non-relevant documents. Queries are automatically expanded by adding all the terms not in the original query that are in the relevant documents and non-relevant documents. They are expanded

Cross-reactive microbial peptides can modulate HIV-specific CD8+ T cell responses.

Directory of Open Access Journals (Sweden)

Christopher W Pohlmeyer

Full Text Available Heterologous immunity is an important aspect of the adaptive immune response. We hypothesized that this process could modulate the HIV-1-specific CD8+ T cell response, which has been shown to play an important role in HIV-1 immunity and control. We found that stimulation of peripheral blood mononuclear cells (PBMCs from HIV-1-positive subjects with microbial peptides that were cross-reactive with immunodominant HIV-1 epitopes resulted in dramatic expansion of HIV-1-specific CD8+ T cells. Interestingly, the TCR repertoire of HIV-1-specific CD8+ T cells generated by ex vivo stimulation of PBMCs using HIV-1 peptide was different from that of cells stimulated with cross-reactive microbial peptides in some HIV-1-positive subjects. Despite these differences, CD8+ T cells stimulated with either HIV-1 or cross-reactive peptides effectively suppressed HIV-1 replication in autologous CD4+ T cells. These data suggest that exposure to cross-reactive microbial antigens can modulate HIV-1-specific immunity.

On the treatment of nonlinear local feedbacks within advanced nodal generalized perturbation theory

International Nuclear Information System (INIS)

Maldonado, G.I.; Turinsky, P.J.; Kropaczek, D.J.

1993-01-01

Recent efforts to upgrade the underlying neutronics formulations within the in-core nuclear fuel management optimization code FORMOSA (Ref. 1) have produced two important developments; first, a computationally efficient and second-order-accurate advanced nodal generalized perturbation theory (GPT) model [derived from the nonlinear iterative nodal expansion method (NEM)] for evaluating core attributes (i.e., k eff and power distribution versus cycle burnup), and second, an equally efficient and accurate treatment of local thermal-hydraulic and fission product feedbacks embedded within NEM GPT. The latter development is the focus of this paper

Velocity Feedback Experiments

Directory of Open Access Journals (Sweden)

Chiu Choi

2017-02-01

Full Text Available Transient response such as ringing in a control system can be reduced or removed by velocity feedback. It is a useful control technique that should be covered in the relevant engineering laboratory courses. We developed velocity feedback experiments using two different low cost technologies, viz., operational amplifiers and microcontrollers. These experiments can be easily integrated into laboratory courses on feedback control systems or microcontroller applications. The intent of developing these experiments was to illustrate the ringing problem and to offer effective, low cost solutions for removing such problem. In this paper the pedagogical approach for these velocity feedback experiments was described. The advantages and disadvantages of the two different implementation of velocity feedback were discussed also.

Negative thermal expansion materials: technological key for control of thermal expansion

OpenAIRE

Koshi Takenaka

2012-01-01

Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K−1. Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining pra...

Controlling chaos in a nonlinear pendulum using an extended time-delayed feedback control method

International Nuclear Information System (INIS)

Souza de Paula, Aline; Savi, Marcelo Amorim

2009-01-01

Chaos control is employed for the stabilization of unstable periodic orbits (UPOs) embedded in chaotic attractors. The extended time-delayed feedback control uses a continuous feedback loop incorporating information from previous states of the system in order to stabilize unstable orbits. This article deals with the chaos control of a nonlinear pendulum employing the extended time-delayed feedback control method. The control law leads to delay-differential equations (DDEs) that contain derivatives that depend on the solution of previous time instants. A fourth-order Runge-Kutta method with linear interpolation on the delayed variables is employed for numerical simulations of the DDEs and its initial function is estimated by a Taylor series expansion. During the learning stage, the UPOs are identified by the close-return method and control parameters are chosen for each desired UPO by defining situations where the largest Lyapunov exponent becomes negative. Analyses of a nonlinear pendulum are carried out by considering signals that are generated by numerical integration of the mathematical model using experimentally identified parameters. Results show the capability of the control procedure to stabilize UPOs of the dynamical system, highlighting some difficulties to achieve the stabilization of the desired orbit.

ANCON, Space-Independent Reactor Kinetics with Linear or Nonlinear Thermal Feedback

International Nuclear Information System (INIS)

Vigil, John C.; Dugan, E.T.

1988-01-01

1 - Description of problem or function: ANCON solves the point-reactor kinetic equations including thermal feedback. Lump-type heat balance equations are used to represent the thermodynamics, and the heat capacity of each lump can vary with temperature. Thermal feedback can be either a linear or a non-linear function of lump temperature, and the impressed reactivity can be either a polynomial or sinusoidal function. 2 - Method of solution: In ANCON the system of coupled first-order differential equations is solved by a method based on continuous analytic continuation (references 2 and 3). The basic procedure consists of expanding all the dependent variables except reactivity in Taylor series, with a truncation error criterion, over successive intervals on the time axis. Variations of the basic procedure are used to increase the efficiency of the method in special situations. Automatic switching from the basic procedure to one of its variations (and vice-versa) may occur during the course of a transient. The method yields an analytic criterion for the magnitude of the time-step at any point in the transient. 3 - Restrictions on the complexity of the problem: The program is currently restricted to a maximum of six delayed neutron groups and a maximum of 56 lumps. Larger problems can be accommodated on a 65 K computer by increasing the dimensions of a few subscripted variables. Also, the code is currently restricted to a constant external transport delays, only the open-loop response of a reactor can be computed with ANCON

Following Surgically Assisted Rapid Palatal Expansion, Do Tooth-Borne or Bone-Borne Appliances Provide More Skeletal Expansion and Dental Expansion?

Science.gov (United States)

Hamedi-Sangsari, Adrien; Chinipardaz, Zahra; Carrasco, Lee

2017-10-01

The aim of this study was to compare outcome measurements of skeletal and dental expansion with bone-borne (BB) versus tooth-borne (TB) appliances after surgically assisted rapid palatal expansion (SARPE). This study was performed to provide quantitative measurements that will help the oral surgeon and orthodontist in selecting the appliance with, on average, the greatest amount of skeletal expansion and the least amount of dental expansion. A computerized database search was performed using PubMed, EBSCO, Cochrane, Scopus, Web of Science, and Google Scholar on publications in reputable oral surgery and orthodontic journals. A systematic review and meta-analysis was completed with the predictor variable of expansion appliance (TB vs BB) and outcome measurement of expansion (in millimeters). Of 487 articles retrieved from the 6 databases, 5 articles were included, 4 with cone-beam computed tomographic (CBCT) data and 1 with non-CBCT 3-dimensional cast data. There was a significant difference in skeletal expansion (standardized mean difference [SMD], 0.92; 95% confidence interval [CI], 0.54-1.30; P appliances. However, there was no significant difference in dental expansion (SMD, 0.05; 95% CI, -0.24 to 0.34; P = .03). According to the literature, to achieve more effective skeletal expansion and minimize dental expansion after SARPE, a BB appliance should be favored. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Reactive-brittle dynamics in peridotite alteration

Science.gov (United States)

Evans, O.; Spiegelman, M. W.; Kelemen, P. B.

2017-12-01

The interactions between reactive fluids and brittle solids are critical in Earth dynamics. Implications of such processes are wide-ranging: from earthquake physics to geologic carbon sequestration and the cycling of fluids and volatiles through subduction zones. Peridotite alteration is a common feature in many of these processes, which - despite its obvious importance - is relatively poorly understood from a geodynamical perspective. In particular, alteration reactions are thought to be self-limiting in nature, contradicting observations of rocks that have undergone 100% hydration/carbonation. One potential explanation of this observation is the mechanism of "reaction-driven cracking": that volume changes associated with these reactions are large enough to fracture the surrounding rock, leading to a positive feedback where new reactive surfaces are exposed and fluid pathways are created. The purpose of this study is to investigate the relative roles of reaction, elastic stresses and surface tension in alteration reactions. In this regard we derive a system of equations describing reactive fluid flow in an elastically deformable porous media, and explore them via a combination of analytic and numerical solutions. Using this model we show that the final stress state of a dry peridotite that has undergone reaction depends strongly on the rates of reaction versus fluid transport: significant fluid flow driven by pressure and/or surface tension gradients implies higher fractions of serpentinization, leaving behind a highly stressed residuum of partially reacted material. Using a model set-up that mimics a cylindrical triaxial apparatus we predict that the resulting stresses would lead to tensile failure and the generation of radially oriented cracks.

A multiple objective mixed integer linear programming model for power generation expansion planning

Energy Technology Data Exchange (ETDEWEB)

Antunes, C. Henggeler; Martins, A. Gomes [INESC-Coimbra, Coimbra (Portugal); Universidade de Coimbra, Dept. de Engenharia Electrotecnica, Coimbra (Portugal); Brito, Isabel Sofia [Instituto Politecnico de Beja, Escola Superior de Tecnologia e Gestao, Beja (Portugal)

2004-03-01

Power generation expansion planning inherently involves multiple, conflicting and incommensurate objectives. Therefore, mathematical models become more realistic if distinct evaluation aspects, such as cost and environmental concerns, are explicitly considered as objective functions rather than being encompassed by a single economic indicator. With the aid of multiple objective models, decision makers may grasp the conflicting nature and the trade-offs among the different objectives in order to select satisfactory compromise solutions. This paper presents a multiple objective mixed integer linear programming model for power generation expansion planning that allows the consideration of modular expansion capacity values of supply-side options. This characteristic of the model avoids the well-known problem associated with continuous capacity values that usually have to be discretized in a post-processing phase without feedback on the nature and importance of the changes in the attributes of the obtained solutions. Demand-side management (DSM) is also considered an option in the planning process, assuming there is a sufficiently large portion of the market under franchise conditions. As DSM full costs are accounted in the model, including lost revenues, it is possible to perform an evaluation of the rate impact in order to further inform the decision process (Author)

Fault Tolerant Feedback Control

DEFF Research Database (Denmark)

Stoustrup, Jakob; Niemann, H.

2001-01-01

An architecture for fault tolerant feedback controllers based on the Youla parameterization is suggested. It is shown that the Youla parameterization will give a residual vector directly in connection with the fault diagnosis part of the fault tolerant feedback controller. It turns out...... that there is a separation be-tween the feedback controller and the fault tolerant part. The closed loop feedback properties are handled by the nominal feedback controller and the fault tolerant part is handled by the design of the Youla parameter. The design of the fault tolerant part will not affect the design...... of the nominal feedback con-troller....

Feedback-related brain activity predicts learning from feedback in multiple-choice testing.

Science.gov (United States)

Ernst, Benjamin; Steinhauser, Marco

2012-06-01

Different event-related potentials (ERPs) have been shown to correlate with learning from feedback in decision-making tasks and with learning in explicit memory tasks. In the present study, we investigated which ERPs predict learning from corrective feedback in a multiple-choice test, which combines elements from both paradigms. Participants worked through sets of multiple-choice items of a Swahili-German vocabulary task. Whereas the initial presentation of an item required the participants to guess the answer, corrective feedback could be used to learn the correct response. Initial analyses revealed that corrective feedback elicited components related to reinforcement learning (FRN), as well as to explicit memory processing (P300) and attention (early frontal positivity). However, only the P300 and early frontal positivity were positively correlated with successful learning from corrective feedback, whereas the FRN was even larger when learning failed. These results suggest that learning from corrective feedback crucially relies on explicit memory processing and attentional orienting to corrective feedback, rather than on reinforcement learning.

Advanced CANDU Design With Negative Power Feedback

International Nuclear Information System (INIS)

Andang-Widi-Harto; Muslim

2004-01-01

The problem of positive power feedback in the recent PHWR-CANDU design, especially related to coolant void increase, will be overcame by the use of dual moderator concept, in which two moderator systems are used, i.e. a main moderator outside the calandria tube and an annular moderator inside the annular space. Annular moderator is allowed to boil in the case of overheating. The numerical calculations have been performed for two core design namely HWR-DM-ST and HWR-DM-XI which can reach burn up of 16,000 and 17,500 MWd/ ton U respectively. The results for the two designs is that the values of k at fully annular moderator filling condition are 1.0054 (HWR-DM-ST) and 1.0019 (HWR-DM-XI), while at completely empty annular moderator condition are 0.9634 (HWR-DM-ST) and 0.9143 (HWR-DM-XI). The decrease of coolant flow rate from 3,043 kg/s to 853 kg/s decrease k values of 0.0109 (HWR-DM-ST) and 0.0232 (HWR-DM-XI). While increasing inlet coolant enthalpy from 2,950 kJ/kg to 3,175 kJ/kg decreases of k values of 0.0074 (HWR-DM-ST) and 0.0239 (HWR-DM-XI). Thus, it can be summarized that the HWR-DM design has negative power reactivity feedback.(author)

Student Engagement with Feedback

Science.gov (United States)

Scott, Jon; Shields, Cathy; Gardner, James; Hancock, Alysoun; Nutt, Alex

2011-01-01

This report considers Biological Sciences students' perceptions of feedback, compared with those of the University as a whole, this includes what forms of feedback were considered most useful and how feedback used. Compared with data from previous studies, Biological Sciences students gave much greater recognition to oral feedback, placing it on a…

Severity of Acute Infectious Mononucleosis Correlates with Cross-Reactive Influenza CD8 T-Cell Receptor Repertoires.

Science.gov (United States)

Aslan, Nuray; Watkin, Levi B; Gil, Anna; Mishra, Rabinarayan; Clark, Fransenio G; Welsh, Raymond M; Ghersi, Dario; Luzuriaga, Katherine; Selin, Liisa K

2017-12-05

Fifty years after the discovery of Epstein-Barr virus (EBV), it remains unclear how primary infection with this virus leads to massive CD8 T-cell expansion and acute infectious mononucleosis (AIM) in young adults. AIM can vary greatly in severity, from a mild transient influenza-like illness to a prolonged severe syndrome. We questioned whether expansion of a unique HLA-A2.01-restricted, cross-reactive CD8 T-cell response between influenza virus A-M1 58 (IAV-M1) and EBV BMLF1 280 (EBV-BM) could modulate the immune response to EBV and play a role in determining the severity of AIM in 32 college students. Only ex vivo total IAV-M1 and IAV-M1+EBV-BM cross-reactive tetramer + frequencies directly correlated with AIM severity and were predictive of severe disease. Expansion of specific cross-reactive memory IAV-M1 T-cell receptor (TCR) Vβ repertoires correlated with levels of disease severity. There were unique profiles of qualitatively different functional responses in the cross-reactive and EBV-specific CD8 T-cell responses in each of the three groups studied, severe-AIM patients, mild-AIM patients, and seropositive persistently EBV-infected healthy donors, that may result from differences in TCR repertoire use. IAV-M1 tetramer + cells were functionally cross-reactive in short-term cultures, were associated with the highest disease severity in AIM, and displayed enhanced production of gamma interferon, a cytokine that greatly amplifies immune responses, thus frequently contributing to induction of immunopathology. Altogether, these data link heterologous immunity via CD8 T-cell cross-reactivity to CD8 T-cell repertoire selection, function, and resultant disease severity in a common and important human infection. In particular, it highlights for the first time a direct link between the TCR repertoire with pathogenesis and the diversity of outcomes upon pathogen encounter. IMPORTANCE The pathogenic impact of immune responses that by chance cross-react to unrelated

FOXO3a reactivation mediates the synergistic cytotoxic effects of rapamycin and cisplatin in oral squamous cell carcinoma cells

International Nuclear Information System (INIS)

Fang Liang; Wang Huiming; Zhou Lin; Yu Da

2011-01-01

FOXO3a, a well-known transcriptional regulator, controls a wide spectrum of biological processes. The Phosphoinositide-3-kinase (PI3K)/Akt signaling pathway inactivates FOXO3a via phosphorylation-induced nuclear exclusion and degradation. A loss or gain of FOXO3a activity has been correlated with efficiency of chemotherapies in various cancers including oral squamous cell carcinoma (OSCC). Therefore, in the current study, we have investigated the FOXO3a activity modulating and antitumor effects of rapamycin and cisplatin in OSCC cells. Cisplatin inhibited proliferation and induced apoptosis in a dose-dependent way in OSCC Tca8113 cells. Rapamycin alone had no effect on cell proliferation and apoptosis. Rapamycin downregulated the expression of S-phase kinase associated protein-2 (Skp2) and increased the FOXO3a protein stability but induced the upregulation of feedback Akt activation-mediated FOXO3a phosphorylation. Cisplatin decreased the phosphorylation of FOXO3a via Akt inhibition. Rapamycin combined with cisplatin as its feedback Akt activation inhibitor revealed the most dramatic FOXO3a nuclear localization and reactivation with the prevention of its feedback loop and exposed significant synergistic effects of decreased cell proliferation and increased apoptosis in vitro and decreased tumor size in vivo. Furthermore, the downstream effects of FOXO3a reactivation were found to be accumulation of p27 and Bim. In conclusion, rapamycin/cisplatin combination therapy boosts synergistic antitumor effects through the significant FOXO3a reactivation in OSCC cells. These results may represent a novel mechanism by which rapamycin/cisplatin combination therapy proves to be a potent molecular-targeted strategy for OSCC.

VENUS-2, Reactor Kinetics with Feedback, 2-D LMFBR Disassembly Excursions

International Nuclear Information System (INIS)

Jackson, J.F.; Nicholson, R.B.; Weber, D.P.

1980-01-01

1 - Description of problem or function: VENUS-2 is an improved edition of the VENUS fast-reactor disassembly program. It is a two- dimensional (r-z) coupled neutronics-hydrodynamics code that calculates the dynamic behavior of an LMFBR during a prompt-critical disassembly excursion. It calculates the power history and fission energy release as well as the space-time histories of the fuel temperatures, core material pressures, and core material motions. Reactivity feedback effects due to Doppler broadening and reactor material motion are taken into account. 2 - Method of solution: The power and energy release are calculated using a point-kinetics formulation with up to six delayed neutron groups. The reactivity is a combination of an input driving function and feedback effects due to Doppler broadening and material motion. An adiabatic model is used to calculate the temperature increase throughout the reactor based on an initial temperature distribution and power profile provided as input data. These temperatures are, in turn, converted to fuel pressures through one of several equation of state options provided. The material motion that results from the pressure buildup is calculated by a direct finite difference solution of a set of two-dimensional (r-z) hydrodynamics equations. This is done in Lagrangian coordinates. The reactivity change associated with this motion is calculated by first-order perturbation theory. The displacements are also used to adjust the fuel densities as required for the density dependent equation-of- state option. An automatic time-step-size selection scheme is provided. 3 - Restrictions on the complexity of the problem: VENUS-2 is written so that the dimensions of the storage arrays can be readily changed to accommodate a broad range of problem sizes. In the base version, the total number of mesh intervals is restricted such that (NR+3)*(NZ+3) is less than 700, where NR and NZ are the total number of mesh intervals in the r and z

Feedback i matematik

DEFF Research Database (Denmark)

Sortkær, Bent

2017-01-01

Feedback bliver i litteraturen igen og igen fremhævet som et af de mest effektive midler til at fremme elevers præstationer i skolen (Hartberg, Dobson, & Gran, 2012; Hattie & Timperley, 2007; Wiliam, 2015). Dette på trods af, at flere forskere påpeger, at feedback ikke altid er læringsfremmende...... (Hattie & Gan, 2011), og nogle endda viser, at feedback kan have en negativ virkning i forhold til præstationer (Kluger & DeNisi, 1996). Artiklen vil undersøge disse tilsyneladende modstridende resultater ved at stille spørgsmålet: Under hvilke forudsætninger virker feedback i matematik læringsfremmende......? Dette gøres ved at dykke ned i forskningslitteraturen omhandlende feedback ud fra en række temaer for på den måde at besvare ovenstående spørgsmål....

Calculations of steady-state and reactivity insertion transients in a research reactor simulating the PWR

International Nuclear Information System (INIS)

Mladin, Mirea; Mladin, Daniela; Prodea, Ilie

2010-01-01

In 2008, IAEA started a Coordinated Research Project for benchmarking the thermalhydraulic and neutronic computer codes for research reactor analysis against the experimental data. In this framework, for the first year of research contract, the Institute for Nuclear Research engaged in steady-state analysis of SPERT-III reactor and also in the simulation of the reactivity insertion tests performed in this reactor during mid sixties. In the first part, the paper describes a Monte Carlo input model of the oxide core selected for investigation and the results of the steady-state neutronic calculations with respect to hot and cold core reactivity excess and control rods worth. Also, prompt neutron life and reactivity feed-back coefficients were examined. These results were compared with the data provided in the reactor specification document concerning neutronic design calculated data. The second part of the paper is dedicated to calculation of the reactivity insertion transients with RELAP5 and CATHARE2 thermalhydraulic codes, both including point reactor kinetics models, and to comparison with experimental data. (authors)

Adaptation to TKI Treatment Reactivates ERK Signaling in Tyrosine Kinase-Driven Leukemias and Other Malignancies.

Science.gov (United States)

Bruner, J Kyle; Ma, Hayley S; Li, Li; Qin, Alice Can Ran; Rudek, Michelle A; Jones, Richard J; Levis, Mark J; Pratz, Keith W; Pratilas, Christine A; Small, Donald

2017-10-15

FMS-like tyrosine kinase-3 (FLT3) tyrosine kinase inhibitors (TKI) have been tested extensively to limited benefit in acute myeloid leukemia (AML). We hypothesized that FLT3/internal tandem duplication (ITD) leukemia cells exhibit mechanisms of intrinsic signaling adaptation to TKI treatment that are associated with an incomplete response. Here, we identified reactivation of ERK signaling within hours following treatment of FLT3/ITD AML cells with selective inhibitors of FLT3. When these cells were treated with inhibitors of both FLT3 and MEK in combination, ERK reactivation was abrogated and anti-leukemia effects were more pronounced compared with either drug alone. ERK reactivation was also observed following inhibition of other tyrosine kinase-driven cancer cells, including EGFR-mutant lung cancer, HER2-amplified breast cancer, and BCR-ABL leukemia. These studies reveal an adaptive feedback mechanism in tyrosine kinase-driven cancers associated with reactivation of ERK signaling in response to targeted inhibition. Cancer Res; 77(20); 5554-63. ©2017 AACR . ©2017 American Association for Cancer Research.

Trainees' Perceptions of Feedback: Validity Evidence for Two FEEDME (Feedback in Medical Education) Instruments.

Science.gov (United States)

Bing-You, Robert; Ramesh, Saradha; Hayes, Victoria; Varaklis, Kalli; Ward, Denham; Blanco, Maria

2018-01-01

Construct: Medical educators consider feedback a core component of the educational process. Effective feedback allows learners to acquire new skills, knowledge, and attitudes. Learners' perceptions of feedback are an important aspect to assess with valid methods in order to improve the feedback skills of educators and the feedback culture. Although guidelines for delivering effective feedback have existed for several decades, medical students and residents often indicate that they receive little feedback. A recent scoping review on feedback in medical education did not reveal any validity evidence on instruments to assess learner's perceptions of feedback. The purpose of our study was to gather validity evidence on two novel FEEDME (Feedback in Medical Education) instruments to assess medical students' and residents' perceptions of the feedback that they receive. After the authors developed an initial instrument with 54 items, cognitive interviews with medical students and residents suggested that 2 separate instruments were needed, one focused on the feedback culture (FEEDME-Culture) and the other on the provider of feedback (FEEDME-Provider). A Delphi study with 17 medical education experts and faculty members assessed content validity. The response process was explored involving 31 medical students and residents at 2 academic institutions. Exploratory factor analysis and reliability analyses were performed on completed instruments. Two Delphi consultation rounds refined the wording of items and eliminated several items. Learners found both instruments easy and quick to answer; it took them less than 5 minutes to complete. Learners preferred an electronic format of the instruments over paper. Factor analysis revealed a two- and three-factor solution for the FEEDME-Culture and FEEDME-Provider instruments, respectively. Cronbach's alpha was greater than 0.80 for all factors. Items on both instruments were moderately to highly correlated (range, r = .3-.7). Our

Skriftlig feedback i engelskundervisningen

DEFF Research Database (Denmark)

Kjærgaard, Hanne Wacher

2017-01-01

The article describes useful feedback strategies in language teaching and describes the feedback practices of lower-seconday teachers in Denmark. The article is aimed at language teahcers in secondary schools.......The article describes useful feedback strategies in language teaching and describes the feedback practices of lower-seconday teachers in Denmark. The article is aimed at language teahcers in secondary schools....

Feedback and efficient behavior.

Directory of Open Access Journals (Sweden)

Sandro Casal

Full Text Available Feedback is an effective tool for promoting efficient behavior: it enhances individuals' awareness of choice consequences in complex settings. Our study aims to isolate the mechanisms underlying the effects of feedback on achieving efficient behavior in a controlled environment. We design a laboratory experiment in which individuals are not aware of the consequences of different alternatives and, thus, cannot easily identify the efficient ones. We introduce feedback as a mechanism to enhance the awareness of consequences and to stimulate exploration and search for efficient alternatives. We assess the efficacy of three different types of intervention: provision of social information, manipulation of the frequency, and framing of feedback. We find that feedback is most effective when it is framed in terms of losses, that it reduces efficiency when it includes information about inefficient peers' behavior, and that a lower frequency of feedback does not disrupt efficiency. By quantifying the effect of different types of feedback, our study suggests useful insights for policymakers.

Feedback - fra et elevperspektiv

DEFF Research Database (Denmark)

Petersen, Benedikte Vilslev; Pedersen, Bent Sortkær

Feedback bliver i litteraturen igen og igen fremhævet som et af de mest effektive midler til at fremme elevers præstationer i skolen (Hattie og Timperley, 2007). Andre studier er dog inde på at feedback ikke altid er læringsfremmende og nogle viser endda at feedback kan have en negativ virkning i...... forhold til præstationer (Kluger & DeNisi, 1996). I forsøget på at forklare hvordan og hvorfor feedback virker (forskelligt), er der undersøgt flere dimensioner og forhold omkring feedback (se bl.a. Black og Wiliam, 1998; Hattie og Timperley, 2007; Shute, 2008). Dog er der få studier der undersøger...... hvordan feedback opleves fra et elevperspektiv (Ruiz-Primo og Li, 2013). Samtidig er der i feedbacklitteraturen en mangel på kvalitative studier, der kommer tæt på fænomenet feedback, som det viser sig i klasserummet (Ruiz-Primo og Li, 2013) i naturlige omgivelser (Black og Wiliam, 1998), og hvordan...

MILP Approach for Bilevel Transmission and Reactive Power Planning Considering Wind Curtailment

DEFF Research Database (Denmark)

Ugranli, Faruk; Karatepe, Engin; Nielsen, Arne Hejde

2017-01-01

In this study, two important planning problems in power systems that are transmission expansion and reactive power are formulated as a mixed-integer linear programming taking into account the bilevel structure due to the consideration of market clearing under several load-wind scenarios....... The objective of the proposed method is to minimize the installation cost of transmission lines, reactive power sources, and the annual operation costs of conventional generators corresponding to the curtailed wind energy while maintaining the reliable system operation. Lower level problems of the bilevel...... structure are designated for the market clearing which is formulated by using the linearized optimal power flow equations. In order to obtain mixed-integer linear programming formulation, the so-called lower level problems are represented by using primal-dual formulation. By using the proposed method, power...

Negative thermal expansion materials

International Nuclear Information System (INIS)

Evans, J.S.O.

1997-01-01

The recent discovery of negative thermal expansion over an unprecedented temperature range in ZrW 2 O 8 (which contracts continuously on warming from below 2 K to above 1000 K) has stimulated considerable interest in this unusual phenomenon. Negative and low thermal expansion materials have a number of important potential uses in ceramic, optical and electronic applications. We have now found negative thermal expansion in a large new family of materials with the general formula A 2 (MO 4 ) 3 . Chemical substitution dramatically influences the thermal expansion properties of these materials allowing the production of ceramics with negative, positive or zero coefficients of thermal expansion, with the potential to control other important materials properties such as refractive index and dielectric constant. The mechanism of negative thermal expansion and the phase transitions exhibited by this important new class of low-expansion materials will be discussed. (orig.)

Feedback reliability calculation for an iterative block decision feedback equalizer

OpenAIRE

Huang, G; Nix, AR; Armour, SMD

2009-01-01

A new class of iterative block decision feedback equalizer (IB-DFE) was pioneered by Chan and Benvenuto. Unlike the conventional DFE, the IB-DFE is optimized according to the reliability of the feedback (FB) symbols. Since the use of the training sequence (TS) for feedback reliability (FBR) estimation lowers the bandwidth efficiency, FBR estimation without the need for additional TS is of considerable interest. However, prior FBR estimation is limited in the literature to uncoded M-ary phases...

Conclusive evidence of abrupt coagulation inside the void during cyclic nanoparticle formation in reactive plasma

International Nuclear Information System (INIS)

Wetering, F. M. J. H. van de; Nijdam, S.; Beckers, J.

2016-01-01

In this letter, we present scanning electron microscopy (SEM) results that confirm in a direct way our earlier explanation of an abrupt coagulation event as the cause for the void hiccup. In a recent paper, we reported on the fast and interrupted expansion of voids in a reactive dusty argon–acetylene plasma. The voids appeared one after the other, each showing a peculiar, though reproducible, behavior of successive periods of fast expansion, abrupt contraction, and continued expansion. The abrupt contraction was termed “hiccup” and was related to collective coagulation of a new generation of nanoparticles growing in the void using relatively indirect methods: electron density measurements and optical emission spectroscopy. In this letter, we present conclusive evidence using SEM of particles collected at different moments in time spanning several growth cycles, which enables us to follow the nanoparticle formation process in great detail.

Feedback stabilization initiative

International Nuclear Information System (INIS)

1997-06-01

Much progress has been made in attaining high confinement regimes in magnetic confinement devices. These operating modes tend to be transient, however, due to the onset of MHD instabilities, and their stabilization is critical for improved performance at steady state. This report describes the Feedback Stabilization Initiative (FSI), a broad-based, multi-institutional effort to develop and implement methods for raising the achievable plasma betas through active MHD feedback stabilization. A key element in this proposed effort is the Feedback Stabilization Experiment (FSX), a medium-sized, national facility that would be specifically dedicated to demonstrating beta improvement in reactor relevant plasmas by using a variety of MHD feedback stabilization schemes

Feedback stabilization initiative

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

Much progress has been made in attaining high confinement regimes in magnetic confinement devices. These operating modes tend to be transient, however, due to the onset of MHD instabilities, and their stabilization is critical for improved performance at steady state. This report describes the Feedback Stabilization Initiative (FSI), a broad-based, multi-institutional effort to develop and implement methods for raising the achievable plasma betas through active MHD feedback stabilization. A key element in this proposed effort is the Feedback Stabilization Experiment (FSX), a medium-sized, national facility that would be specifically dedicated to demonstrating beta improvement in reactor relevant plasmas by using a variety of MHD feedback stabilization schemes.

Feedback matters current feedback practices in the EFL classroom

CERN Document Server

Reitbauer, Margit; Mercer, Sarah; Schumm-Fauster, Jennifer

2013-01-01

This varied collection of papers is concerned with feedback in the language learning context. With its blend of theoretical overviews, action research-based empirical studies and practical implications, this will be a valuable resource for all academics and practitioners concerned with generating feedback that matters.

Neutron density fluctuations in point reactor systems with dichotomic reactivity noise

International Nuclear Information System (INIS)

Sako, Okitsugu

1984-01-01

The exactly solvable stochastic point reactor model systems are analyzed through the stochastic Liouville equation. Three kinds of model systems are treated: (1) linear system without delayed neutrons, (2) linear system with one-group of delayed neutrons, and (3) nonlinear system with direct power feedback. The exact expressions for the fluctuations of neutron density, such as the moments, autocorrelation function and power spectral density, are derived in the case where the colored reactivity noise is described by the dichotomic, or two state, Markov process with arbitrary correlation time and intensity, and the effects of the finite correlation time and intensity of the noise on the neutron density fluctuations are investigated. The influence of presence of delayed neutrons and the effect of nonlinearity of system on the neutron density fluctuations are also elucidated. When the reactivity correlation time is very short, the correlation time has almost no effect on the power spectral density, and the relative fluctuation of neutron density in the stationary state is not affected very much by the presence of delayed neutrons and also by the nonlinearity of system. On the other hand, if the reactivity correlation time is very long, the effect of the reactivity noise on the power spectral density appears at very low frequency, and the presence of delayed neutrons has an effect of reducing the neutron density fluctuations. (author)

Negative thermal expansion materials: technological key for control of thermal expansion.

Science.gov (United States)

Takenaka, Koshi

2012-02-01

Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over -30 ppm K -1 . Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade.

Negative thermal expansion materials: technological key for control of thermal expansion

Directory of Open Access Journals (Sweden)

Koshi Takenaka

2012-01-01

Full Text Available Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K−1. Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade.

Negative thermal expansion materials: technological key for control of thermal expansion

International Nuclear Information System (INIS)

Takenaka, Koshi

2012-01-01

Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K −1 . Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade. (topical review)

Formativ Feedback

DEFF Research Database (Denmark)

Hyldahl, Kirsten Kofod

Denne bog undersøger, hvordan lærere kan anvende feedback til at forbedre undervisningen i klasselokalet. I denne sammenhæng har John Hattie, professor ved Melbourne Universitet, udviklet en model for feedback, hvilken er baseret på synteser af meta-analyser. I 2009 udgav han bogen "Visible...

Thermal expansion of coking coals

Energy Technology Data Exchange (ETDEWEB)

Orlik, M.; Klimek, J. (Vyzkumny a Zkusebni Ustav Nova Hut, Ostrava (Czechoslovakia))

1992-12-01

Analyzes expansion of coal mixtures in coke ovens during coking. Methods for measuring coal expansion on both a laboratory and pilot plant scale are comparatively evaluated. The method, developed, tested and patented in Poland by the Institute for Chemical Coal Processing in Zabrze (Polish standard PN-73/G-04522), is discussed. A laboratory device developed by the Institute for measuring coal expansion is characterized. Expansion of black coal from 10 underground mines in the Ostrava-Karvina coal district and from 9 coal mines in the Upper Silesia basin in Poland is comparatively evaluated. Investigations show that coal expansion reaches a maximum for coal types with a volatile matter ranging from 20 to 25%. With increasing volatile matter in coal, its expansion decreases. Coal expansion increases with increasing swelling index. Coal expansion corresponds with coal dilatation. With increasing coal density its expansion increases. Coal mixtures should be selected in such a way that their expansion does not cause a pressure exceeding 40 MPa. 11 refs.

Feedback Loop Gains and Feedback Behavior (1996)

DEFF Research Database (Denmark)

Kampmann, Christian Erik

2012-01-01

Linking feedback loops and system behavior is part of the foundation of system dynamics, yet the lack of formal tools has so far prevented a systematic application of the concept, except for very simple systems. Having such tools at their disposal would be a great help to analysts in understanding...... large, complicated simulation models. The paper applies tools from graph theory formally linking individual feedback loop strengths to the system eigenvalues. The significance of a link or a loop gain and an eigenvalue can be expressed in the eigenvalue elasticity, i.e., the relative change...... of an eigenvalue resulting from a relative change in the gain. The elasticities of individual links and loops may be found through simple matrix operations on the linearized system. Even though the number of feedback loops can grow rapidly with system size, reaching astronomical proportions even for modest systems...

Technologies for learner-centered feedback

Directory of Open Access Journals (Sweden)

Jane Costello

2013-09-01

Full Text Available As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes. Feedback, types of feedback, guidelines for effective learner-centered feedback, and feedback’s relationship to assessment are presented. Methods of providing feedback, for example, automated, audio scribe pens, digital audio, etc., and the related technologies are described. Technologies that allow instructors to make informed decisions about the use of various methods for feedback are discussed.

Corrective feedback, learner uptake, and feedback perception in a Chinese as a foreign language classroom

Directory of Open Access Journals (Sweden)

Tingfeng Fu

2016-03-01

Full Text Available The role of corrective feedback in second language classrooms has received considerable research attention in the past few decades. However, most of this research has been conducted in English-teaching settings, either ESL or EFL. This study examined teacher feedback, learner uptake as well as learner and teacher perception of feedback in an adult Chinese as a foreign language classroom. Ten hours of classroom interactions were videotaped, transcribed and coded for analysis. Lyster and Ranta’s (1997 coding system involving six types of feedback was initially used to identify feedback frequency and learner uptake. However, the teacher was found to use a number of additional feedback types. Altogether, 12 types of feedback were identified: recasts, delayed recasts, clarification requests, translation, metalinguistic feedback, elicitation, explicit correction, asking a direct question, repetition, directing question to other students, re-asks, and using L1-English. Differences were noted in the frequency of some of the feedback types as well as learner uptake compared to what had been reported in some previous ESL and EFL studies. With respect to the new feedback types, some led to noticeable uptake. As for the students’ and teacher’s perceptions, they did not match and both the teacher and the students were generally not accurate in perceiving the frequency of each feedback type. The findings are discussed in terms of the role of context in affecting the provision and effectiveness of feedback and its relationship to student and teacher perception of feedback.

Multi-bunch Feedback Systems

International Nuclear Information System (INIS)

Lonza, M; Schmickler, H

2014-01-01

Coupled-bunch instabilities excited by the interaction of the particle beam with its surroundings can seriously limit the performance of circular particle accelerators. These instabilities can be cured by the use of active feedback systems based on sensors capable of detecting the unwanted beam motion and actuators that apply the feedback correction to the beam. Advances in electronic technology now allow the implementation of feedback loops using programmable digital systems. Besides important advantages in terms of flexibility and reproducibility, digital systems open the way to the use of novel diagnostic tools and additional features. We first introduce coupled-bunch instabilities, analysing the equation of motion of charged particles and the different modes of oscillation of a multi-bunch beam, showing how they can be observed and measured. Different types of feedback systems will then be presented as examples of real implementations that belong to the history of multi-bunch feedback systems. The main components of a feedback system and the related issues will also be analysed. Finally, we shall focus on digital feedback systems, their characteristics, and features, as well as on how they can be concretely exploited for both the optimization of feedback performance and for beam dynamics studies

Virial Expansion Bounds

Science.gov (United States)

Tate, Stephen James

2013-10-01

In the 1960s, the technique of using cluster expansion bounds in order to achieve bounds on the virial expansion was developed by Lebowitz and Penrose (J. Math. Phys. 5:841, 1964) and Ruelle (Statistical Mechanics: Rigorous Results. Benjamin, Elmsford, 1969). This technique is generalised to more recent cluster expansion bounds by Poghosyan and Ueltschi (J. Math. Phys. 50:053509, 2009), which are related to the work of Procacci (J. Stat. Phys. 129:171, 2007) and the tree-graph identity, detailed by Brydges (Phénomènes Critiques, Systèmes Aléatoires, Théories de Jauge. Les Houches 1984, pp. 129-183, 1986). The bounds achieved by Lebowitz and Penrose can also be sharpened by doing the actual optimisation and achieving expressions in terms of the Lambert W-function. The different bound from the cluster expansion shows some improvements for bounds on the convergence of the virial expansion in the case of positive potentials, which are allowed to have a hard core.

Giving Feedback: Development of Scales for the Mum Effect, Discomfort Giving Feedback, and Feedback Medium Preference

Science.gov (United States)

Cox, Susie S.; Marler, Laura E.; Simmering, Marcia J.; Totten, Jeff W.

2011-01-01

Research in organizational behavior and human resources promotes the view that it is critical for managers to provide accurate feedback to employees, yet little research addresses rater tendencies (i.e., the "mum effect") and attitudes that influence how performance feedback is given. Because technology has changed the nature of…

Social evaluative threat with verbal performance feedback alters neuroendocrine response to stress.

Science.gov (United States)

Phan, Jenny M; Schneider, Ekaterina; Peres, Jeremy; Miocevic, Olga; Meyer, Vanessa; Shirtcliff, Elizabeth A

2017-11-01

Laboratory stress tasks such as the Trier Social Stress Test (TSST) have provided a key piece to the puzzle for how psychosocial stress impacts the hypothalamic-pituitary-adrenal axis, other stress-responsive biomarkers, and ultimately wellbeing. These tasks are thought to work through biopsychosocial processes, specifically social evaluative threat and the uncontrollability heighten situational demands. The present study integrated an experimental modification to the design of the TSST to probe whether additional social evaluative threat, via negative verbal feedback about speech performance, can further alter stress reactivity in 63 men and women. This TSST study confirmed previous findings related to stress reactivity and stress recovery but extended this literature in several ways. First, we showed that additional social evaluative threat components, mid-task following the speech portion of the TSST, were still capable of enhancing the psychosocial stressor. Second, we considered stress-reactive hormones beyond cortisol to include dehydroepiandrosterone (DHEA) and testosterone, and found these hormones were also stress-responsive, and their release was coupled with one another. Third, we explored whether gain- and loss-framing incentive instructions, meant to influence performance motivation by enhancing the personal relevance of task performance, impacted hormonal reactivity. Results showed that each hormone was stress reactive and further had different responses to the modified TSST compared to the original TSST. Beyond the utility of showing how the TSST can be modified with heightened social evaluative threat and incentive-framing instructions, this study informs about how these three stress-responsive hormones have differential responses to the demands of a challenge and a stressor. Copyright © 2017 Elsevier Inc. All rights reserved.

What higher education students do with teacher feedback: Feedback ...

African Journals Online (AJOL)

Writing pedagogy research has constantly maintained that feedback is 'an essential component of virtually every model of the writing process' (Hall, 1990: 43) as it motivates writers to improve their next draft. Feedback during the writing process improves not only student attitude to writing but writing performance if students ...

Age differences in feedback reactions: The roles of employee feedback orientation on social awareness and utility.

Science.gov (United States)

Wang, Mo; Burlacu, Gabriela; Truxillo, Donald; James, Keith; Yao, Xiang

2015-07-01

Organizations worldwide are currently experiencing shifts in the age composition of their workforces. The workforce is aging and becoming increasingly age-diverse, suggesting that organizational researchers and practitioners need to better understand how age differences may manifest in the workplace and the implications for human resource practice. Integrating socioemotional selectivity theory with the performance feedback literature and using a time-lagged design, the current study examined age differences in moderating the relationships between the characteristics of performance feedback and employee reactions to the feedback event. The results suggest that older workers had higher levels of feedback orientation on social awareness, but lower levels of feedback orientation on utility than younger workers. Furthermore, the positive associations between favorability of feedback and feedback delivery and feedback reactions were stronger for older workers than for younger workers, whereas the positive association between feedback quality and feedback reactions was stronger for younger workers than for older workers. Finally, the current study revealed that age-related differences in employee feedback orientation could explain the different patterns of relationships between feedback characteristics and feedback reactions across older and younger workers. These findings have both theoretical and practical implications for building theory about workplace aging and improving ways that performance feedback is managed across employees from diverse age groups. (c) 2015 APA, all rights reserved).

Ultra-low thermal expansion realized in giant negative thermal expansion materials through self-compensation

Science.gov (United States)

Shen, Fei-Ran; Kuang, Hao; Hu, Feng-Xia; Wu, Hui; Huang, Qing-Zhen; Liang, Fei-Xiang; Qiao, Kai-Ming; Li, Jia; Wang, Jing; Liu, Yao; Zhang, Lei; He, Min; Zhang, Ying; Zuo, Wen-Liang; Sun, Ji-Rong; Shen, Bao-Gen

2017-10-01

Materials with zero thermal expansion (ZTE) or precisely tailored thermal expansion are in urgent demand of modern industries. However, the overwhelming majority of materials show positive thermal expansion. To develop ZTE or negative thermal expansion (NTE) materials as compensators has become an important challenge. Here, we present the evidence for the realization of ultra-low thermal expansion in Mn-Co-Ge-In particles. The bulk with the Ni2In-type hexagonal structure undergoes giant NTE owing to a martensitic magnetostructural transition. The major finding is that the thermal expansion behavior can be totally controlled by modulating the crystallinity degree and phase transition from atomic scale. Self-compensation effect leads to ultra-low thermal expansion with a linear expansion coefficient as small as +0.68 × 10-6/K over a wide temperature range around room temperature. The present study opens an avenue to reach ZTE particularly from the large class of giant NTE materials based on phase transition.

Ultra-low thermal expansion realized in giant negative thermal expansion materials through self-compensation

Directory of Open Access Journals (Sweden)

Fei-Ran Shen

2017-10-01

Full Text Available Materials with zero thermal expansion (ZTE or precisely tailored thermal expansion are in urgent demand of modern industries. However, the overwhelming majority of materials show positive thermal expansion. To develop ZTE or negative thermal expansion (NTE materials as compensators has become an important challenge. Here, we present the evidence for the realization of ultra-low thermal expansion in Mn–Co–Ge–In particles. The bulk with the Ni2In-type hexagonal structure undergoes giant NTE owing to a martensitic magnetostructural transition. The major finding is that the thermal expansion behavior can be totally controlled by modulating the crystallinity degree and phase transition from atomic scale. Self-compensation effect leads to ultra-low thermal expansion with a linear expansion coefficient as small as +0.68 × 10−6/K over a wide temperature range around room temperature. The present study opens an avenue to reach ZTE particularly from the large class of giant NTE materials based on phase transition.

Sonification and haptic feedback in addition to visual feedback enhances complex motor task learning.

Science.gov (United States)

Sigrist, Roland; Rauter, Georg; Marchal-Crespo, Laura; Riener, Robert; Wolf, Peter

2015-03-01

Concurrent augmented feedback has been shown to be less effective for learning simple motor tasks than for complex tasks. However, as mostly artificial tasks have been investigated, transfer of results to tasks in sports and rehabilitation remains unknown. Therefore, in this study, the effect of different concurrent feedback was evaluated in trunk-arm rowing. It was then investigated whether multimodal audiovisual and visuohaptic feedback are more effective for learning than visual feedback only. Naïve subjects (N = 24) trained in three groups on a highly realistic virtual reality-based rowing simulator. In the visual feedback group, the subject's oar was superimposed to the target oar, which continuously became more transparent when the deviation between the oars decreased. Moreover, a trace of the subject's trajectory emerged if deviations exceeded a threshold. The audiovisual feedback group trained with oar movement sonification in addition to visual feedback to facilitate learning of the velocity profile. In the visuohaptic group, the oar movement was inhibited by path deviation-dependent braking forces to enhance learning of spatial aspects. All groups significantly decreased the spatial error (tendency in visual group) and velocity error from baseline to the retention tests. Audiovisual feedback fostered learning of the velocity profile significantly more than visuohaptic feedback. The study revealed that well-designed concurrent feedback fosters complex task learning, especially if the advantages of different modalities are exploited. Further studies should analyze the impact of within-feedback design parameters and the transferability of the results to other tasks in sports and rehabilitation.

Feedback in Clinical Education, Part I: Characteristics of Feedback Provided by Approved Clinical Instructors

Science.gov (United States)

Nottingham, Sara; Henning, Jolene

2014-01-01

Context Providing students with feedback is an important component of athletic training clinical education; however, little information is known about the feedback that Approved Clinical Instructors (ACIs; now known as preceptors) currently provide to athletic training students (ATSs). Objective To characterize the feedback provided by ACIs to ATSs during clinical education experiences. Design Qualitative study. Setting One National Collegiate Athletic Association Division I athletic training facility and 1 outpatient rehabilitation clinic that were clinical sites for 1 entry-level master's degree program accredited by the Commission on Accreditation of Athletic Training Education. Patients or Other Participants A total of 4 ACIs with various experience levels and 4 second-year ATSs. Data Collection and Analysis Extensive field observations were audio recorded, transcribed, and integrated with field notes for analysis. The constant comparative approach of open, axial, and selective coding was used to inductively analyze data and develop codes and categories. Member checking, triangulation, and peer debriefing were used to promote trustworthiness of the study. Results The ACIs gave 88 feedback statements in 45 hours and 10 minutes of observation. Characteristics of feedback categories included purpose, timing, specificity, content, form, and privacy. Conclusions Feedback that ACIs provided included several components that made each feedback exchange unique. The ACIs in our study provided feedback that is supported by the literature, suggesting that ACIs are using current recommendations for providing feedback. Feedback needs to be investigated across multiple athletic training education programs to gain more understanding of certain areas of feedback, including frequency, privacy, and form. PMID:24143902

Pupillary and affective responses to maternal feedback and the development of borderline personality disorder symptoms.

Science.gov (United States)

Scott, Lori N; Zalewski, Maureen; Beeney, Joseph E; Jones, Neil P; Stepp, Stephanie D

2017-08-01

Etiological models propose that a biological vulnerability to emotional reactivity plays an important role in the development of borderline personality disorder (BPD). However, the physiological and phenomenological components of emotional reactivity that predict the course of BPD symptoms in adolescence are poorly understood. This prospective study examines pupillary and affective responses to maternal feedback as predictors of BPD symptom development in adolescent girls over 18 months. Fifty-seven 16-year-old girls completed a laboratory task in which they heard recorded clips of their own mothers making critical or praising statements about them, as well as neutral statements that did not pertain to them. Changes in girls' pupil dilation and subjective affect were assessed throughout the task. The results demonstrated that greater pupillary response to maternal criticism predicted increases in BPD symptoms over time. In addition, greater pupillary and positive affective responses to maternal praise were associated with higher BPD symptoms at age 16 and faster decreases in BPD symptoms over time, but only among girls who heard clips that were rated by independent observers as less praising. The results suggest that emotional reactivity can serve as either a risk or a protective factor depending on context, with differential effects of reactivity to criticism versus praise.

Calculation methods of reactivity using derivatives of nuclear power and Filter fir

International Nuclear Information System (INIS)

Diaz, Daniel Suescun

2007-01-01

This work presents two new methods for the solution of the inverse point kinetics equation. The first method is based on the integration by parts of the integral of the inverse point kinetics equation, which results in a power series in terms of the nuclear power in time dependence. Applying some conditions to the nuclear power, the reactivity is represented as first and second derivatives of this nuclear power. This new calculation method for reactivity has special characteristics, amongst which the possibility of using different sampling periods, and the possibility of restarting the calculation, after its interruption associated it with a possible equipment malfunction, allowing the calculation of reactivity in a non-continuous way. Apart from this reactivity can be obtained with or without dependency on the nuclear power memory. The second method is based on the Laplace transform of the point kinetics equations, resulting in an expression equivalent to the inverse kinetics equation as a function of the power history. The reactivity can be written in terms of the summation of convolution with response to impulse, characteristic of a linear system. For its digital form the Z-transform is used, which is the discrete version of the Laplace transform. In this method it can be pointed out that the linear part is equivalent to a filter named Finite Impulse Response (Fir). The Fir filter will always be, stable and non-varying in time, and, apart from this, it can be implemented in the non-recursive way. This type of implementation does not require feedback, allowing the calculation of reactivity in a continuous way. The proposed methods were validated using signals with random noise and showing the relationship between the reactivity difference and the degree of the random noise. (author)

Feedback and Incentives:

DEFF Research Database (Denmark)

Eriksson, Tor Viking; Poulsen, Anders; Villeval, Marie-Claire

This paper experimentally investigates the impact of different pay and relative performance information policies on employee effort. We explore three information policies: No feedback about relative performance, feedback given halfway through the production period, and continuously updated feedba...... of positive peer effects since the underdogs almost never quit the competition even when lagging significantly behind, and frontrunners do not slack off. Moreover, in both pay schemes information feedback reduces the quality of the low performers' work....

Brugbar peer feedback

DEFF Research Database (Denmark)

Hvass, Helle; Heger, Stine

Studerende kan være medskabere af undervisning i akademisk skrivning, når de modtager og giver feedback til hinandens ufærdige akademiske tekster. Det ser vi i et udviklingsprojekt, hvor vi afprøver kollektive vejledningsformater. Vi har dog erfaret: 1. at studerende mangler træning i at give og ...... modtage feedback 2. at den manglende træning kan stå i vejen for realiseringen af læringspotentialet ved peer feedback....

Ultra-low thermal expansion realized in giant negative thermal expansion materials through self-compensation

OpenAIRE

Fei-Ran Shen; Hao Kuang; Feng-Xia Hu; Hui Wu; Qing-Zhen Huang; Fei-Xiang Liang; Kai-Ming Qiao; Jia Li; Jing Wang; Yao Liu; Lei Zhang; Min He; Ying Zhang; Wen-Liang Zuo; Ji-Rong Sun

2017-01-01

Materials with zero thermal expansion (ZTE) or precisely tailored thermal expansion are in urgent demand of modern industries. However, the overwhelming majority of materials show positive thermal expansion. To develop ZTE or negative thermal expansion (NTE) materials as compensators has become an important challenge. Here, we present the evidence for the realization of ultra-low thermal expansion in Mn–Co–Ge–In particles. The bulk with the Ni2In-type hexagonal structure undergoes giant NTE o...

Global climate feedbacks

Energy Technology Data Exchange (ETDEWEB)

Manowitz, B.

1990-10-01

The important physical, chemical, and biological events that affect global climate change occur on a mesoscale -- requiring high spatial resolution for their analysis. The Department of Energy has formulated two major initiatives under the US Global Change Program: ARM (Atmospheric Radiation Measurements), and CHAMMP (Computer Hardware Advanced Mathematics and Model Physics). ARM is designed to use ground and air-craft based observations to document profiles of atmospheric composition, clouds, and radiative fluxes. With research and models of important physical processes, ARM will delineate the relationships between trace gases, aerosol and cloud structure, and radiative transfer in the atmosphere, and will improve the parameterization of global circulation models. The present GCMs do not model important feedbacks, including those from clouds, oceans, and land processes. The purpose of this workshop is to identify such potential feedbacks, to evaluate the uncertainties in the feedback processes (and, if possible, to parameterize the feedback processes so that they can be treated in a GCM), and to recommend research programs that will reduce the uncertainties in important feedback processes. Individual reports are processed separately for the data bases.

The reactivity meter and core reactivity

International Nuclear Information System (INIS)

Siltanen, P.

1999-01-01

This paper discussed in depth the point kinetic equations and the characteristics of the point kinetic reactivity meter, particularly for large negative reactivities. From a given input signal representing the neutron flux seen by a detector, the meter computes a value of reactivity in dollars (ρ/β), based on inverse point kinetics. The prompt jump point of view is emphasised. (Author)

Hvad siger forskningen om feedback?

DEFF Research Database (Denmark)

Holdt Christensen, Peter

2016-01-01

”Feedback skal serveres ligesom en gammeldags sandwich. Først lidt brød, så det lidt sejere kød og til sidst igen til lidt brød”. Sådan nogenlunde lyder en pragmatisk løsning på udfordringerne ved at give feedback. Når medarbejdere skal have negativ feedback, skal denne altså pakkes ind, så...... feedbacken indledes med let fordøjeligt positiv feedback, derefter kommer den negative – og noget sværere fordøjelige – feedback, og til sidst afrundes feedbacken med en god udgangsreplik, nemlig den positive feedback....

Solution of the point kinetics equations in the presence of Newtonian temperature feedback by Pade approximations via the analytical inversion method

International Nuclear Information System (INIS)

Aboanber, A E; Nahla, A A

2002-01-01

A method based on the Pade approximations is applied to the solution of the point kinetics equations with a time varying reactivity. The technique consists of treating explicitly the roots of the inhour formula. A significant improvement has been observed by treating explicitly the most dominant roots of the inhour equation, which usually would make the Pade approximation inaccurate. Also the analytical inversion method which permits a fast inversion of polynomials of the point kinetics matrix is applied to the Pade approximations. Results are presented for several cases of Pade approximations using various options of the method with different types of reactivity. The formalism is applicable equally well to non-linear problems, where the reactivity depends on the neutron density through temperature feedback. It was evident that the presented method is particularly good for cases in which the reactivity can be represented by a series of steps and performed quite well for more general cases

Influence of feedback characteristics on perceived learning value of feedback in clerkships: does culture matter?

Science.gov (United States)

Suhoyo, Yoyo; Van Hell, Elisabeth A; Kerdijk, Wouter; Emilia, Ova; Schönrock-Adema, Johanna; Kuks, Jan B M; Cohen-Schotanus, Janke

2017-04-05

Various feedback characteristics have been suggested to positively influence student learning. It is not clear how these feedback characteristics contribute to students' perceived learning value of feedback in cultures classified low on the cultural dimension of individualism and high on power distance. This study was conducted to validate the influence of five feedback characteristics on students' perceived learning value of feedback in an Indonesian clerkship context. We asked clerks in Neurology (n = 169) and Internal Medicine (n = 132) to assess on a 5-point Likert scale the learning value of the feedback they received. We asked them to record whether the feedback provider (1) informed the student what went well, (2) mentioned which aspects of performance needed improvement, (3) compared the student's performance to a standard, (4) further explained or demonstrated the correct performance, and (5) prepared an action plan with the student to improve performance. Data were analyzed using multilevel regression. A total of 250 students participated in this study, 131 from Internal Medicine (response rate 99%) and 119 from Neurology (response rate 70%). Of these participants, 225 respondents (44% males, 56% females) completed the form and reported 889 feedback moments. Students perceived feedback as more valuable when the feedback provider mentioned their weaknesses (β = 0.153, p learning value of feedback. No gender differences were found for perceived learning value. In Indonesia, we could validate four out of the five characteristics for effective feedback. We argue that our findings relate to culture, in particular to the levels of individualism and power distance. The recognized characteristics of what constitutes effective feedback should be validated across cultures.

Thermal expansion of granite rocks

International Nuclear Information System (INIS)

Stephansson, O.

1978-04-01

The thermal expansion of rocks is strongly controlled by the thermal expansion of the minerals. The theoretical thermal expansion of the Stripa Granite is gound to be 21 . 10 -6 [deg C] -1 at 25 deg C and 38 . 10 -6 [deg C] -1 at 400 deg C. The difference in expansion for the rock forming minerals causes micro cracking at heating. The expansion due to micro cracks is found to be of the same order as the mineral expansion. Most of the micro cracks will close at pressures of the order of 10 - 20 MPa. The thermal expansion of a rock mass including the effect of joints is determined in the pilot heater test in the Stripa Mine

Uncovering the spatially distant feedback loops of global trade: A network and input-output approach.

Science.gov (United States)

Prell, Christina; Sun, Laixiang; Feng, Kuishuang; He, Jiaying; Hubacek, Klaus

2017-05-15

Land-use change is increasingly driven by global trade. The term "telecoupling" has been gaining ground as a means to describe how human actions in one part of the world can have spatially distant impacts on land and land-use in another. These interactions can, over time, create both direct and spatially distant feedback loops, in which human activity and land use mutually impact one another over great expanses. In this paper, we develop an analytical framework to clarify spatially distant feedbacks in the case of land use and global trade. We use an innovative mix of multi-regional input-output (MRIO) analysis and stochastic actor-oriented models (SAOMs) for analyzing the co-evolution of changes in trade network patterns with those of land use, as embodied in trade. Our results indicate that the formation of trade ties and changes in embodied land use mutually impact one another, and further, that these changes are linked to disparities in countries' wealth. Through identifying this feedback loop, our results support ongoing discussions about the unequal trade patterns between rich and poor countries that result in uneven distributions of negative environmental impacts. Finally, evidence for this feedback loop is present even when controlling for a number of underlying mechanisms, such as countries' land endowments, their geographical distance from one another, and a number of endogenous network tendencies. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of the Teacher Feedback Observation Scheme: evaluating the quality of feedback in peer groups

NARCIS (Netherlands)

Thurlings, Marieke; Vermeulen, Marjan; Kreijns, Karel; Bastiaens, Theo; Stijnen, Sjef

2018-01-01

Research suggests that feedback is an essential element in learning. This study focuses on feedback that teachers provide in reciprocal peer groups to improve their performance in the classroom. The Teacher Feedback Observation Scheme (TFOS) was developed to identify feedback patterns, which

Feedback System Theory

Science.gov (United States)

1978-11-01

R 2. GOVT A $ SION NO. 3 RIEqLPýIVT’S.;TALOG NUMBER r/ 4. TITLE (and wbiFflT, -L M4 1 , FEEDBACK SYSTEM THEORY ~r Inter in- 6. PERFORMING ORG. REPORT...ANNUAL REPORT FEEDBACK SYSTEM THEORY AFOSR GRANT NO. 76-2946B Air Force Office of Scientific Research for year ending October 31, 1978 79 02 08 L|I...re less stringent than in other synthesis techniques which cannot handle significant parameter uncertainty. _I FEEDBACK SYSTEM THEORY 1. Introduction

Benchmark analyses for EBR-II shutdown heat removal tests SHRT-17 and SHRT-45R

Energy Technology Data Exchange (ETDEWEB)

Mochizuki, Hiroyasu, E-mail: mochizki@u-fukui.ac.jp [Research Institute of Nuclear Engineering, University of Fukui (Japan); Muranaka, Kohmei; Asai, Takayuki [Graduate School of Engineering, University of Fukui (Japan); Rooijen, W.F.G. van, E-mail: rooijen@u-fukui.ac.jp [Research Institute of Nuclear Engineering, University of Fukui (Japan)

2014-08-15

Highlights: • The IAEA EBR-II benchmarks SHRT-17 and SHRT-45R are analyzed with a 1D system code. • The calculated result of SHRT-17 corresponds well to the measured results. • For SHRT-45R ERANOS is used for various core parameters and reactivity coefficients. • SHRT-45R peak temperature is overestimated with the ERANOS feedback coefficients. • The peak temperature is well predicted when the feedback coefficient is reduced. - Abstract: Benchmark problems of several experiments in EBR-II, proposed by ANL and coordinated by the IAEA, are analyzed using the plant system code NETFLOW++ and the neutronics code ERANOS. The SHRT-17 test conducted as a loss-of-flow test is calculated using only the NETFLOW++ code because it is a purely thermal–hydraulic problem. The measured data were made available to the benchmark participants after the results of the blind benchmark calculations were submitted. Our work shows that major parameters of the plant are predicted with good accuracy. The SHRT-45R test, an unprotected loss of flow test is calculated using the NETFLOW++ code with the aid of delayed neutron data and reactivity coefficients calculated by the ERANOS code. These parameters are used in the NETFLOW++ code to perform a semi-coupled analysis of the neutronics – thermal–hydraulic problem. The measured data are compared with our calculated results. In our work, the peak temperature is underestimated, indicating that the reactivity feedback coefficients are too strong. When the reactivity feedback coefficient for thermal expansion is adjusted, good agreement is obtained in general for the calculated plant parameters, with a few exceptions.

Positive Feedbacks Enhance Macroalgal Resilience on Degraded Coral Reefs.

Science.gov (United States)

Dell, Claire L A; Longo, Guilherme O; Hay, Mark E

2016-01-01

Many reefs have shifted from coral and fish dominated habitats to less productive macroalgal dominated habitats, and current research is investigating means of reversing this phase shift. In the tropical Pacific, overfished reefs with inadequate herbivory can become dominated by the brown alga Sargassum polycystum. This alga suppresses recruitment and survival of corals and fishes, thus limiting the potential for reef recovery. Here we investigate the mechanisms that reinforce S. polycystum dominance and show that in addition to negatively affecting other species, this species acts in a self-reinforcing manner, positively promoting survival and growth of conspecifics. We found that survival and growth of both recruit-sized and mature S. polycystum fronds were higher within Sargassum beds than outside the beds and these results were found in both protected and fished reefs. Much of this benefit resulted from reduced herbivory within the Sargassum beds, but adult fronds also grew ~50% more within the beds even when herbivory did not appear to be occurring, suggesting some physiological advantage despite the intraspecific crowding. Thus via positive feedbacks, S. polycystum enhances its own growth and resistance to herbivores, facilitating its dominance (perhaps also expansion) and thus its resilience on degraded reefs. This may be a key feedback mechanism suppressing the recovery of coral communities in reefs dominated by macroalgal beds.

Positive Feedbacks Enhance Macroalgal Resilience on Degraded Coral Reefs.

Directory of Open Access Journals (Sweden)

Claire L A Dell

Full Text Available Many reefs have shifted from coral and fish dominated habitats to less productive macroalgal dominated habitats, and current research is investigating means of reversing this phase shift. In the tropical Pacific, overfished reefs with inadequate herbivory can become dominated by the brown alga Sargassum polycystum. This alga suppresses recruitment and survival of corals and fishes, thus limiting the potential for reef recovery. Here we investigate the mechanisms that reinforce S. polycystum dominance and show that in addition to negatively affecting other species, this species acts in a self-reinforcing manner, positively promoting survival and growth of conspecifics. We found that survival and growth of both recruit-sized and mature S. polycystum fronds were higher within Sargassum beds than outside the beds and these results were found in both protected and fished reefs. Much of this benefit resulted from reduced herbivory within the Sargassum beds, but adult fronds also grew ~50% more within the beds even when herbivory did not appear to be occurring, suggesting some physiological advantage despite the intraspecific crowding. Thus via positive feedbacks, S. polycystum enhances its own growth and resistance to herbivores, facilitating its dominance (perhaps also expansion and thus its resilience on degraded reefs. This may be a key feedback mechanism suppressing the recovery of coral communities in reefs dominated by macroalgal beds.

Pathogen-Reactive T Helper Cell Analysis in the Pig

Directory of Open Access Journals (Sweden)

Friederike Ebner

2017-05-01

Full Text Available There is growing interest in studying host–pathogen interactions in human-relevant large animal models such as the pig. Despite the progress in developing immunological reagents for porcine T cell research, there is an urgent need to directly assess pathogen-specific T cells—an extremely rare population of cells, but of upmost importance in orchestrating the host immune response to a given pathogen. Here, we established that the activation marker CD154 (CD40L, known from human and mouse studies, identifies also porcine antigen-reactive CD4+ T lymphocytes. CD154 expression was upregulated early after antigen encounter and CD4+CD154+ antigen-reactive T cells coexpressed cytokines. Antigen-induced expansion and autologous restimulation enabled a time- and dose-resolved analysis of CD154 regulation and a significantly increased resolution in phenotypic profiling of antigen-responsive cells. CD154 expression identified T cells responding to staphylococcal Enterotoxin B superantigen stimulation as well as T cells responding to the fungus Candida albicans and T cells specific for a highly prevalent intestinal parasite, the nematode Ascaris suum during acute and trickle infection. Antigen-reactive T cells were further detected after immunization of pigs with a single recombinant bacterial antigen of Streptococcus suis only. Thus, our study offers new ways to study antigen-specific T lymphocytes in the pig and their contribution to host–pathogen interactions.

The Mythology of Feedback

Science.gov (United States)

Adcroft, Andy

2011-01-01

Much of the general education and discipline-specific literature on feedback suggests that it is a central and important element of student learning. This paper examines feedback from a social process perspective and suggests that feedback is best understood through an analysis of the interactions between academics and students. The paper argues…

From Static Output Feedback to Structured Robust Static Output Feedback: A Survey

OpenAIRE

Sadabadi , Mahdieh ,; Peaucelle , Dimitri

2016-01-01

This paper reviews the vast literature on static output feedback design for linear time-invariant systems including classical results and recent developments. In particular, we focus on static output feedback synthesis with performance specifications, structured static output feedback, and robustness. The paper provides a comprehensive review on existing design approaches including iterative linear matrix inequalities heuristics, linear matrix inequalities with rank constraints, methods with ...

Feedback as Real-Time Constructions

Science.gov (United States)

Keiding, Tina Bering; Qvortrup, Ane

2014-01-01

This article offers a re-description of feedback and the significance of time in feedback constructions based on systems theory. It describes feedback as internal, real-time constructions in a learning system. From this perspective, feedback is neither immediate nor delayed, but occurs in the very moment it takes place. This article argues for a…

Gender differences in cue exposure reactivity and 9-month outcome.

Science.gov (United States)

Sterling, Robert C; Dean, Jessica; Weinstein, Stephen P; Murphy, Jennifer; Gottheil, Edward

2004-07-01

Gender differences have been shown to be related to the course of cocaine dependence and treatment. While previous research has shown cue exposure procedures to be somewhat effective at reducing reactivity of substance dependent individuals to drug related stimuli, the few studies that have examined gender differences in craving and cue-reactivity have yielded equivocal results. We have recently demonstrated that an active cue-exposure procedure that featured cocaine-dependent individuals receiving immediate feedback about their level of physiological arousal following videotaped exposure to cocaine-related stimuli was capable of positively influencing in-treatment (helplessness, abstinence efficacy) as well as 9-month followup outcome (i.e., urinalysis) indices (Sterling, R., Gottheil, E., Murphy, J., & Weinstein, S. (2001). Cue exposure and abstinence efficacy. College on Problems of Drug Dependence, Phoenix, AZ, June 17, 2001). The purpose of the present study was to determine whether differential in-treatment or 9-month followup outcomes were obtained for male and female study participants. Subjects in this study were 81 individuals (47 male/34 female) who met DSM-IV criteria for cocaine dependence and who had consented to be randomly assigned to either the active cue-exposure or control conditions. Participants were compared along a myriad of pre-treatment, in-treatment, and 9-month followup measures. Other than males reporting more recent employment, there was no obvious systematic pattern of differences on pre-treatment indices. No gender differences in treatment retention were observed. With respect to 9-month followup, no gender differences on measures of addiction severity, psychological functioning, or urinalyses were noted. However males were more "cue-reactive" and more successful at establishing control over their reactivity to the cocaine stimuli. Additional research is needed to determine whether these differences in reactivity can be more clearly

Ambulatory Feedback System

Science.gov (United States)

Finger, Herbert; Weeks, Bill

1985-01-01

This presentation discusses instrumentation that will be used for a specific event, which we hope will carry on to future events within the Space Shuttle program. The experiment is the Autogenic Feedback Training Experiment (AFTE) scheduled for Spacelab 3, currently scheduled to be launched in November, 1984. The objectives of the AFTE are to determine the effectiveness of autogenic feedback in preventing or reducing space adaptation syndrome (SAS), to monitor and record in-flight data from the crew, to determine if prediction criteria for SAS can be established, and, finally, to develop an ambulatory instrument package to mount the crew throughout the mission. The purpose of the Ambulatory Feedback System (AFS) is to record the responses of the subject during a provocative event in space and provide a real-time feedback display to reinforce the training.

Feedback på tekst i grupper

DEFF Research Database (Denmark)

Hvass, Helle; Heger, Stine

2017-01-01

med temaet Feedback på tekst i grupper er via aktiviteter at gøre de studerende bevidste om, at feedback er noget, de skal lære, og noget, de skal øve sig på. De forskellige aktiviteter sætter de studerende i gang med at skabe rammer for feedback, at træne feedback og at give og modtage feedback på...... hinandens tekster. Temaet er bygget op omkring 2 forskellige elementer: 1) forberedelse af feedback og 2) udførelse af feedback....

Resonant state expansions

International Nuclear Information System (INIS)

Lind, P.

1993-02-01

The completeness properties of the discrete set of bound state, virtual states and resonances characterizing the system of a single nonrelativistic particle moving in a central cutoff potential is investigated. From a completeness relation in terms of these discrete states and complex scattering states one can derive several Resonant State Expansions (RSE). It is interesting to obtain purely discrete expansion which, if valid, would significantly simplify the treatment of the continuum. Such expansions can be derived using Mittag-Leffler (ML) theory for a cutoff potential and it would be nice to see if one can obtain the same expansions starting from an eigenfunction theory that is not restricted to a finite sphere. The RSE of Greens functions is especially important, e.g. in the continuum RPA (CRPA) method of treating giant resonances in nuclear physics. The convergence of RSE is studied in simple cases using square well wavefunctions in order to achieve high numerical accuracy. Several expansions can be derived from each other by using the theory of analytic functions and one can the see how to obtain a natural discretization of the continuum. Since the resonance wavefunctions are oscillating with an exponentially increasing amplitude, and therefore have to be interpreted through some regularization procedure, every statement made about quantities involving such states is checked by numerical calculations.Realistic nuclear wavefunctions, generated by a Wood-Saxon potential, are used to test also the usefulness of RSE in a realistic nuclear calculation. There are some fundamental differences between different symmetries of the integral contour that defines the continuum in RSE. One kind of symmetry is necessary to have an expansion of the unity operator that is idempotent. Another symmetry must be used if we want purely discrete expansions. These are found to be of the same form as given by ML. (29 refs.)

Understanding feedback: A learning theory perspective

NARCIS (Netherlands)

Thurlings, Marieke; Vermeulen, Marjan; Bastiaens, Theo; Stijnen, Sjef

2018-01-01

This article aims to review literature on feedback to teachers. Because research has hardly focused on feedback among teachers, the review’s scope also includes feedback in class- rooms. The review proposes that the effectiveness of feedback and feedback processes depend on the learning theory

Analogical study of the servo-control of a reactivity modulator

International Nuclear Information System (INIS)

Le Bot, Michel

1969-03-01

In the context of the study of the transfer functions related to the Cabri reactor, this paper presents: the objective of the servo-control (reactivity modulator, reasons for the analogical study), the principles of the servo-control (description of the servo-controlled system, elaboration of the error signal, principles of the phase meter, critical analysis of different types of phase meters), the analogical formulation (transfer diagram of the process, analogical simulation of the process, analogical realization of the phase meter, simulation of the Low Frequency generator), study of the controlled system and results (system responses to echelon and ramp signals, responses of the controlled system with the phase meter in feedback)

Styrket feedback gennem studerendes selvevaluering

DEFF Research Database (Denmark)

Andersen, Lars Bo

2016-01-01

Studerende er ofte utilfredse med såvel kvaliteten som kvantiteten af feedback på skriftligt arbejde. Ligeledes kan det som underviser være svært at afgive feedback, der tager udgangspunkt i de studerendes respektive læringssituationer, hvis man ikke har andet afsæt end opgavetekster. Denne artikel...... beskriver derfor to eksperimenter med brug af selvevaluering som kvalificerende mellemled i ekstern feedback på skriveøvelser. Eksperimenternes formål er at styrke den formative læring ved skriftligt arbejde. I det første eksperiment bestod feedbacken af underviser-feedback, mens det andet eksperiment...... indebar peer-feedback og fælles feedback. I begge tilfælde blev selvevalueringen foretaget med udgangspunkt i en kriteriebaseret retteguide. Eksperimenterne medførte, at den eksterne feedback blev målrettet og kvalificeret i forhold til den enkelte studerende, mens selve skriveprocessen mod forventning...

The Effect of Combination of Video Feedback and Audience Feedback on Social Anxiety: Preliminary Findings.

Science.gov (United States)

Chen, Junwen; Mak, Rebecca; Fujita, Satoko

2015-09-01

Although video feedback (VF) is shown to improve appraisals of social performance in socially anxious individuals, its impact on state anxiety during a social situation is mixed. The current study investigated the effect of combined video feedback and audience feedback (AF) on self-perceptions of performance and bodily sensations as well as state anxiety pertaining to a speech task. Forty-one socially anxious students were randomly allocated to combined video feedback with audience feedback (VF + AF), video feedback only (VF), audience feedback only (AF), or a control condition. Following a 3-min speech, participants in the VF + AF, VF, and AF conditions watched the videotape of their speech with cognitive preparation in the presence of three confederates who served as audience, and/or received feedback from the confederates, while the control group watched their videotaped speech without cognitive preparation. Both VF + AF and AF conditions improved distorted appraisal of performance and bodily sensations as well as state anxiety. The clinical implications of these findings are discussed. © The Author(s) 2015.

The Importance of Protons in Reactive Transport Modeling

Science.gov (United States)

McNeece, C. J.; Hesse, M. A.

2014-12-01

The importance of pH in aqueous chemistry is evident; yet, its role in reactive transport is complex. Consider a column flow experiment through silica glass beads. Take the column to be saturated and flowing with solution of a distinct pH. An instantaneous change in the influent solution pH can yield a breakthrough curve with both a rarefaction and shock component (composite wave). This behavior is unique among aqueous ions in transport and is more complex than intuition would tell. Analysis of the hyperbolic limit of this physical system can explain these first order transport phenomenon. This analysis shows that transport behavior is heavily dependent on the shape of the adsorption isotherm. Hence it is clear that accurate surface chemistry models are important in reactive transport. The proton adsorption isotherm has nonconstant concavity due to the proton's ability to partition into hydroxide. An eigenvalue analysis shows that an inflection point in the adsorption isotherm allows the development of composite waves. We use electrostatic surface complexation models to calculate realistic proton adsorption isotherms. Surface characteristics such as specific surface area, and surface site density were determined experimentally. We validate the model by comparison against silica glass bead flow through experiments. When coupled to surface complexation models, the transport equation captures the timing and behavior of breakthrough curves markedly better than with commonly used Langmuir assumptions. Furthermore, we use the adsorption isotherm to predict, a priori, the transport behavior of protons across pH composition space. Expansion of the model to multicomponent systems shows that proton adsorption can force composite waves to develop in the breakthrough curves of ions that would not otherwise exhibit such behavior. Given the abundance of reactive surfaces in nature and the nonlinearity of chemical systems, we conclude that building a greater understanding of

Isotropic Negative Thermal Expansion Metamaterials.

Science.gov (United States)

Wu, Lingling; Li, Bo; Zhou, Ji

2016-07-13

Negative thermal expansion materials are important and desirable in science and engineering applications. However, natural materials with isotropic negative thermal expansion are rare and usually unsatisfied in performance. Here, we propose a novel method to achieve two- and three-dimensional negative thermal expansion metamaterials via antichiral structures. The two-dimensional metamaterial is constructed with unit cells that combine bimaterial strips and antichiral structures, while the three-dimensional metamaterial is fabricated by a multimaterial 3D printing process. Both experimental and simulation results display isotropic negative thermal expansion property of the samples. The effective coefficient of negative thermal expansion of the proposed models is demonstrated to be dependent on the difference between the thermal expansion coefficient of the component materials, as well as on the circular node radius and the ligament length in the antichiral structures. The measured value of the linear negative thermal expansion coefficient of the three-dimensional sample is among the largest achieved in experiments to date. Our findings provide an easy and practical approach to obtaining materials with tunable negative thermal expansion on any scale.

Feedback is good or bad? Medical residents’ points of view on feedback in clinical education

Directory of Open Access Journals (Sweden)

LEILA BAZRAFKAN

2013-04-01

Full Text Available Introduction: Feedback is very important in education and can help quality in the training process and orient the trainees in clinical contexts. This study aimed to assess the residents’ points of view about feedback in clinical education at Shiraz University of Medical Sciences. Methods: The sample of this study included 170 medical residents attending medical workshops in Shiraz University of Medical Sciences. The residents filled a valid and reliable questionnaire containing 21 items on their perceptions of the feedback they got throughout the workshops. The data were analyzed using SPSS version 14. Results: The study revealed that residents, generally, have a positive perception of feedback in their training. The highest score belonged to the items such as “feedback was applicable to future work”, “feedback corrected my behavior”, “feedback worked as a motivation for education” and “feedback was specific in one subject”. Residents who had a negative feedback experience also increased their efforts to learn. The Surgery residents acquired the highest scores while radiology residents got the lowest. The difference between these groups was statistically significant (P = 0.000. Conclusion: The highest mean score belonged to internal medicine residents. This shows that residents believe that obstetrics & gynecology ward is a ward in which the formative assessment is much more powerful in comparison to the other three major wards. The surgery ward received the lowest score for formative assessment and this shows that the feedback in surgery ward is very low.

Reactivity of Monolayer Protected Silver Clusters Towards Excess Ligand: A Calorimetric Study

KAUST Repository

Baksi, Ananya

2017-10-31

Reactivity of monolayer protected atomically precise clusters of noble metals is of significant research interest. Till date very few experimental data are available on the reaction thermodynamics of such clusters. Here we report a calorimetric study of the reaction of glutathione (GSH) protected silver clusters in presence of excess ligand, GSH using isothermal titration calorimetry (ITC). We have studied Ag11(SG)7 and Ag32(SG)19 clusters and compared their reactivity with GSH protected silver nanoparticles (AgNPs) and silver ions. Clusters show intermediate reactivity towards excess ligand com-pared to nanoparticles and silver ions. Several control experiments were performed to understand the degradation mech-anism of these silver clusters and nanoparticles. Effect of dissolved oxygen in the degradation process was studied in de-tail and found that it did not have a significant role, although alternate pathways of degradation with the involvement of oxygen cannot be ruled out. Direct confirmation of the fact that functionalized metal clusters fall in-between NPs and atomic systems in their stability is obtained experimentally for the first time. Several other thermophysical parameters of these clusters were also determined including, density, speed of sound, isentropic compressibility and coefficient of thermal expansion.

Synthesis of human-nature feedbacks

Directory of Open Access Journals (Sweden)

Vanessa Hull

2015-09-01

Full Text Available In today's globalized world, humans and nature are inextricably linked. The coupled human and natural systems (CHANS framework provides a lens with which to understand such complex interactions. One of the central components of the CHANS framework involves examining feedbacks among human and natural systems, which form when effects from one system on another system feed back to affect the first system. Despite developments in understanding feedbacks in single disciplines, interdisciplinary research on CHANS feedbacks to date is scant and often site-specific, a shortcoming that prevents complex coupled systems from being fully understood. The special feature "Exploring Feedbacks in Coupled Human and Natural Systems (CHANS" makes strides to fill this critical gap. Here, as an introduction to the special feature, we provide an overview of CHANS feedbacks. In addition, we synthesize key CHANS feedbacks that emerged in the papers of this special feature across agricultural, forest, and urban landscapes. We also examine emerging themes explored across the papers, including multilevel feedbacks, time lags, and surprises as a result of feedbacks. We conclude with recommendations for future research that can build upon the foundation provided in the special feature.

Does query expansion limit our learning? A comparison of social-based expansion to content-based expansion for medical queries on the internet.

Science.gov (United States)

Pentoney, Christopher; Harwell, Jeff; Leroy, Gondy

2014-01-01

Searching for medical information online is a common activity. While it has been shown that forming good queries is difficult, Google's query suggestion tool, a type of query expansion, aims to facilitate query formation. However, it is unknown how this expansion, which is based on what others searched for, affects the information gathering of the online community. To measure the impact of social-based query expansion, this study compared it with content-based expansion, i.e., what is really in the text. We used 138,906 medical queries from the AOL User Session Collection and expanded them using Google's Autocomplete method (social-based) and the content of the Google Web Corpus (content-based). We evaluated the specificity and ambiguity of the expansion terms for trigram queries. We also looked at the impact on the actual results using domain diversity and expansion edit distance. Results showed that the social-based method provided more precise expansion terms as well as terms that were less ambiguous. Expanded queries do not differ significantly in diversity when expanded using the social-based method (6.72 different domains returned in the first ten results, on average) vs. content-based method (6.73 different domains, on average).

Central insulin administration improves odor-cued reactivation of spatial memory in young men.

Science.gov (United States)

Brünner, Yvonne F; Kofoet, Anja; Benedict, Christian; Freiherr, Jessica

2015-01-01

Insulin receptors are ubiquitously found in the human brain, comprising the olfactory bulb, essential for odor processing, and the hippocampus, important for spatial memory processing. The present study aimed at examining if intranasal insulin, which is known to transiently increase brain insulin levels in humans, would improve odor-cued reactivation of spatial memory in young men. We applied a double-blind, placebo-controlled, counterbalanced within-subject design. The study was conducted at the research unit of a university hospital. Interventions/Participants/Main Outcome Measures: Following intranasal administration of either insulin (40 I.U.) or placebo, male subjects (n = 18) were exposed to eight odors. During each odor exposure, a green-colored field was presented on a 17-in. computer screen. During immediate recall (comprising 3 runs), the participants were re-exposed to each odor cue, and were asked to select the corresponding field (with visual feedback after each response). The delayed recall was scheduled ∼10 min later (without feedback). To test if insulin's putative effect on odor-place memory would be domain-specific, participants also performed a separate place and odor recognition task. Intranasal insulin improved the delayed but not immediate odor-cued recall of spatial memory. This effect was independent of odor type and in the absence of systemic side effects (eg, fasting plasma glucose levels remained unaltered). Place and odor recognition were unaffected by the insulin treatment. These findings suggest that acute intranasal insulin improves odor-cued reactivation of spatial memory in young men.

Feedback For Helpers

Science.gov (United States)

Stromer, Walter F.

1975-01-01

The author offers some feedback to those in the helping professions in three areas: (1) forms and letters; (2) jumping to conclusions; and (3) blaming and belittling, in hopes of stimulating more feedback as well as more positive ways of performing their services. (HMV)

Training effectiveness feedback

International Nuclear Information System (INIS)

Wiggin, N.A.

1987-01-01

A formal method of getting feedback about the job performance of employees is a necessary part of all the authors training programs. The formal process may prove to be inadequate if it is the only process in use. There are many ways and many opportunities to get good feedback about employee performance. It is important to document these methods and specific instances to supplement the more formalized process. The key is to identify them, encourage them, use them, and document the training actions that result from them. This paper describes one plant's method of getting feedback about performance of technicians in the field

Teacher feedback in the classroom. Analyzing and developing teachers' feedback behavior in secondary education

NARCIS (Netherlands)

Voerman, A.

2014-01-01

Providing feedback is one of the most influential means of teachers to enhance student learning. In this dissertation, we first focused on what is known from research about effective (i.e. learning-enhancing) feedback. Effective feedback, mostly studied from a cognitive psychologist point of view,

Feedback Networks

OpenAIRE

Zamir, Amir R.; Wu, Te-Lin; Sun, Lin; Shen, William; Malik, Jitendra; Savarese, Silvio

2016-01-01

Currently, the most successful learning models in computer vision are based on learning successive representations followed by a decision layer. This is usually actualized through feedforward multilayer neural networks, e.g. ConvNets, where each layer forms one of such successive representations. However, an alternative that can achieve the same goal is a feedback based approach in which the representation is formed in an iterative manner based on a feedback received from previous iteration's...

Malaysian Tertiary Level ESL Students’ Perceptions toward Teacher Feedback, Peer Feedback and Self-assessment in their Writing

Directory of Open Access Journals (Sweden)

Kayatri Vasu

2016-09-01

Full Text Available In Malaysia, teacher feedback is highly preferred by students, who often believe that teachers know best. Teacher feedback shows them their teacher’s idea of an ideal writing. However, excessive dependence on teachers adds to their workload. Therefore, teachers are increasingly promoting two other alternative methods that are gradually gaining importance. These methods are peer feedback and self-assessment. This study investigates ESL students’ perceptions toward teacher feedback, peer feedback and self-assessment in students’ writing process. Questionnaires, adapted from the instruments in the literature, were administered to 107 randomly selected students in a private local university in Malaysia. Students found feedback given to the content and organization of their writing more useful than feedback provided for their vocabulary and grammar. It was also found that students perceived feedback from teacher, peers and self-assessment all as highly useful. Additionally the results indicated while there was no significant difference (p > .05 between the students’ perceptions toward teacher feedback and self-assessment, they were both perceived as significantly more useful (p < .001 than peer feedback. The students also perceived explicit feedback as significantly more useful (p < .001 than implicit feedback. The results of this study have implications for English language learning-teaching practitioners and researchers. They shed light on the options preferred by students in revising their writing in ESL writing classrooms. Future research on the effects of teacher feedback, peer feedback and self-assessment on students’ writing performance will provide better insight on the preferred methods in ESL writing classrooms in similar settings.

GIVING AND RECEIVING CONSTRUCTIVE FEEDBACK

Directory of Open Access Journals (Sweden)

Ірина Олійник

2015-05-01

Full Text Available The article scrutinizes the notion of feedback applicable in classrooms where team teaching is provided. The experience of giving and receiving feedback has been a good practice in cooperation between a U.S. Peace Corps volunteer and a Ukrainian counterpart. Giving and receiving feedback is an effective means of classroom observation that provides better insight into the process of teaching a foreign language. The article discusses the stages of feedback and explicates the notion of sharing experience between two teachers working simultaneously in the same classroom. The guidelines for giving and receiving feedback have been provided as well as the most commonly used vocabulary items have been listed. It has been proved that mutual feedback leads to improving teaching methods and using various teaching styles and techniques.

Moving Feedback Forward: Theory to Practice

Science.gov (United States)

Orsmond, Paul; Maw, Stephen J.; Park, Julian R.; Gomez, Stephen; Crook, Anne C.

2013-01-01

There is substantial research interest in tutor feedback and students' perception and use of such feedback. This paper considers some of the major issues raised in relation to tutor feedback and student learning. We explore some of the current feedback drivers, most notably the need for feedback to move away from simply a monologue from a tutor to…

Landscape urbanization and economic growth in China: positive feedbacks and sustainability dilemmas.

Science.gov (United States)

Bai, Xuemei; Chen, Jing; Shi, Peijun

2012-01-03

Accelerating urbanization has been viewed as an important instrument for economic development and reducing regional income disparity in some developing countries, including China. Recent studies (Bloom et al. 2008) indicate that demographic urbanization level has no causal effect on economic growth. However, due to the varying and changing definition of urban population, the use of demographic indicators as a sole representing indicator for urbanization might be misleading. Here, we re-examine the causal relationship between urbanization and economic growth in Chinese cities and provinces in recent decades, using built-up areas as a landscape urbanization indicator. Our analysis shows that (1) larger cities, both in terms of population size and built-up area, and richer cities tend to gain more income, have larger built-up area expansion, and attract more population, than poorer cities or smaller cities; and (2) that there is a long-term bidirectional causality between urban built-up area expansion and GDP per capita at both city and provincial level, and a short-term bidirectional causality at provincial level, revealing a positive feedback between landscape urbanization and urban and regional economic growth in China. Our results suggest that urbanization, if measured by a landscape indicator, does have causal effect on economic growth in China, both within the city and with spillover effect to the region, and that urban land expansion is not only the consequences of economic growth in cities, but also drivers of such growth. The results also suggest that under its current economic growth model, it might be difficult for China to control urban expansion without sacrificing economic growth, and China's policy to stop the loss of agricultural land, for food security, might be challenged by its policy to promote economic growth through urbanization.

RF feedback for KEKB

Energy Technology Data Exchange (ETDEWEB)

Ezura, Eizi; Yoshimoto, Shin-ichi; Akai, Kazunori [National Lab. for High Energy Physics, Tsukuba, Ibaraki (Japan)

1996-08-01

This paper describes the present status of the RF feedback development for the KEK B-Factory (KEKB). A preliminary experiment concerning the RF feedback using a parallel comb-filter was performed through a choke-mode cavity and a klystron. The RF feedback has been tested using the beam of the TRISTAN Main Ring, and has proved to be effective in damping the beam instability. (author)

Reactive Transport in a Pipe in Soluble Rock: a Theoretical and Experimental Study

Science.gov (United States)

Li, W.; Opolot, M.; Sousa, R.; Einstein, H. H.

2015-12-01

Reactive transport processes within the dominant underground flow pathways such as fractures can lead to the widening or narrowing of rock fractures, potentially altering the flow and transport processes in the fractures. A flow-through experiment was designed to study the reactive transport process in a pipe in soluble rock to serve as a simplified representation of a fracture in soluble rock. Assumptions were made to formulate the problem as three coupled, one-dimensional partial differential equations: one for the flow, one for the transport and one for the radius change due to dissolution. Analytical and numerical solutions were developed to predict the effluent concentration and the change in pipe radius. The positive feedback of the radius increase is captured by the experiment and the numerical model. A comparison between the experiment and the simulation results demonstrates the validity of the analytical and numerical models.

Altered Sensory Feedbacks in Pianist's Dystonia: the altered auditory feedback paradigm and the glove effect

Directory of Open Access Journals (Sweden)

Felicia Pei-Hsin Cheng

2013-12-01

Full Text Available Background: This study investigates the effect of altered auditory feedback (AAF in musician's dystonia (MD and discusses whether altered auditory feedback can be considered as a sensory trick in MD. Furthermore, the effect of AAF is compared with altered tactile feedback, which can serve as a sensory trick in several other forms of focal dystonia. Methods: The method is based on scale analysis (Jabusch et al. 2004. Experiment 1 employs synchronization paradigm: 12 MD patients and 25 healthy pianists had to repeatedly play C-major scales in synchrony with a metronome on a MIDI-piano with 3 auditory feedback conditions: 1. normal feedback; 2. no feedback; 3. constant delayed feedback. Experiment 2 employs synchronization-continuation paradigm: 12 MD patients and 12 healthy pianists had to repeatedly play C-major scales in two phases: first in synchrony with a metronome, secondly continue the established tempo without the metronome. There are 4 experimental conditions, among them 3 are the same altered auditory feedback as in Experiment 1 and 1 is related to altered tactile sensory input. The coefficient of variation of inter-onset intervals of the key depressions was calculated to evaluate fine motor control. Results: In both experiments, the healthy controls and the patients behaved very similarly. There is no difference in the regularity of playing between the two groups under any condition, and neither did AAF nor did altered tactile feedback have a beneficial effect on patients’ fine motor control. Conclusions: The results of the two experiments suggest that in the context of our experimental designs, AAF and altered tactile feedback play a minor role in motor coordination in patients with musicians' dystonia. We propose that altered auditory and tactile feedback do not serve as effective sensory tricks and may not temporarily reduce the symptoms of patients suffering from MD in this experimental context.

Who wants feedback? An investigation of the variables influencing residents' feedback-seeking behavior in relation to night shifts.

Science.gov (United States)

Teunissen, Pim W; Stapel, Diederik A; van der Vleuten, Cees; Scherpbier, Albert; Boor, Klarke; Scheele, Fedde

2009-07-01

The literature on feedback in clinical medical education has predominantly treated trainees as passive recipients. Past research has focused on how clinical supervisors can use feedback to improve a trainee's performance. On the basis of research in social and organizational psychology, the authors reconceptualized residents as active seekers of feedback. They investigated what individual and situational variables influence residents' feedback-seeking behavior on night shifts. Early in 2008, the authors sent obstetrics-gynecology residents in the Netherlands--both those in their first two years of graduate training and those gaining experience between undergraduate and graduate training--a questionnaire that assessed four predictor variables (learning and performance goal orientation, and instrumental and supportive leadership), two mediator variables (perceived feedback benefits and costs), and two outcome variables (frequency of feedback inquiry and monitoring). They used structural equation modeling software to test a hypothesized model of relationships between variables. The response rate was 76.5%. Results showed that residents who perceive more feedback benefits report a higher frequency of feedback inquiry and monitoring. More perceived feedback costs result mainly in more feedback monitoring. Residents with a higher learning goal orientation perceive more feedback benefits and fewer costs. Residents with a higher performance goal orientation perceive more feedback costs. Supportive physicians lead residents to perceive more feedback benefits and fewer costs. This study showed that some residents actively seek feedback. Residents' feedback-seeking behavior partially depends on attending physicians' supervisory style. Residents' goal orientations influence their perceptions of the benefits and costs of feedback-seeking.

Development of a longitudinal feedback cavity for the beam feedback system

International Nuclear Information System (INIS)

Huang Gang; Chen Huaibi; Huang Wenhui; Tong Dechun; Lin Yuzheng; Zhao Zhentang

2003-01-01

Longitudinal beam feedback system is widely used to damp coupling bunch instability. Kicker is one of the key components of the longitudinal feedback system. A prototype cavity of longitudinal feedback kicker is developed according to the parameter of BEPC II. The usage of nose cone in the kicker design increased the shunt impedance. In order to avoid the extra tapper in the storage ring, the racetrack shape beam pipe is applied in the kicker. The impedance and the bandwidth of the kicker is measured by the coaxial line impedance measurement platform and the result achieved the design goals

Optimal allocation of reviewers for peer feedback

DEFF Research Database (Denmark)

Wind, David Kofoed; Jensen, Ulf Aslak; Jørgensen, Rasmus Malthe

2017-01-01

feedback to be effective students should give and receive useful feedback. A key challenge in peer feedback is allocating the feedback givers in a good way. It is important that reviewers are allocated to submissions such that the feedback distribution is fair - meaning that all students receive good......Peer feedback is the act of letting students give feedback to each other on submitted work. There are multiple reasons to use peer feedback, including students getting more feedback, time saving for teachers and increased learning by letting students reflect on work by others. In order for peer...... indicated the quality of the feedback. Using this model together with historical data we calculate the feedback-giving skill of each student and uses that as input to an allocation algorithm that assigns submissions to reviewers, in order to optimize the feedback quality for all students. We test...

Feedback Systems for Linear Colliders

International Nuclear Information System (INIS)

1999-01-01

Feedback systems are essential for stable operation of a linear collider, providing a cost-effective method for relaxing tight tolerances. In the Stanford Linear Collider (SLC), feedback controls beam parameters such as trajectory, energy, and intensity throughout the accelerator. A novel dithering optimization system which adjusts final focus parameters to maximize luminosity contributed to achieving record performance in the 1997-98 run. Performance limitations of the steering feedback have been investigated, and improvements have been made. For the Next Linear Collider (NLC), extensive feedback systems are planned as an integral part of the design. Feedback requirements for JLC (the Japanese Linear Collider) are essentially identical to NLC; some of the TESLA requirements are similar but there are significant differences. For NLC, algorithms which incorporate improvements upon the SLC implementation are being prototyped. Specialized systems for the damping rings, rf and interaction point will operate at high bandwidth and fast response. To correct for the motion of individual bunches within a train, both feedforward and feedback systems are planned. SLC experience has shown that feedback systems are an invaluable operational tool for decoupling systems, allowing precision tuning, and providing pulse-to-pulse diagnostics. Feedback systems for the NLC will incorporate the key SLC features and the benefits of advancing technologies

Feedback systems in the SLC

International Nuclear Information System (INIS)

Thompson, K.A.; Jobe, R.K.; Johnson, R.; Phinney, N.

1987-02-01

Two classes of computer-controlled feedback have been implemented to stabilize parameters in subsystems of the SLC: (1) ''slow'' (time scales ∼ minutes) feedback, and (2) ''fast'', i.e., pulse-to-pulse, feedback. The slow loops run in a single FEEDBACK process in the SLC host VAX, which acquires signals and sets control parameters via communication with the database and the network of normal SLC microprocessors. Slow loops exist to stabilize beam energy and energy spread, beam position and angle, and timing of kicker magnets, and to compensate for changes in the phase length of the rf drive line. The fast loops run in dedicated microprocessors, and may sample and/or feedback on particular parameters as often as every pulse of the SLC beam. The first implementations of fast feedback are to control transverse beam blow-up and to stabilize the energy and energy spread of bunches going into the SLC arcs. The overall architecture of the feedback software and the operator interface for controlling loops are discussed

Emotional feedback for mobile devices

CERN Document Server

Seebode, Julia

2015-01-01

This book investigates the functional adequacy as well as the affective impression made by feedback messages on mobile devices. It presents an easily adoptable experimental setup to examine context effects on various feedback messages, and applies it to auditory, tactile and auditory-tactile feedback messages. This approach provides insights into the relationship between the affective impression and functional applicability of these messages as well as an understanding of the influence of unimodal components on the perception of multimodal feedback messages. The developed paradigm can also be extended to investigate other aspects of context and used to investigate feedback messages in modalities other than those presented. The book uses questionnaires implemented on a Smartphone, which can easily be adopted for field studies to broaden the scope even wider. Finally, the book offers guidelines for the design of system feedback.

Multi-bunch feedback systems

CERN Document Server

Lonza, M

2008-01-01

Coupled-bunch instabilities excited by the interaction of the particle beam with its surroundings can seriously limit the performance of circular particle accelerators. These instabilities can be cured by the use of active feedback systems based on sensors capable of detecting the unwanted beam motion and actuators that apply the feedback correction to the beam. The advances in electronic technology now allow the implementation of feedback loops using programmable digital systems. Besides important advantages in terms of flexibility and reproducibility, digital systems open the way to the use of novel diagnostic tools and additional features. The lecture will first introduce coupled-bunch instabilities analysing the equation of motion of charged particles and the different modes of oscillation of a multi-bunch beam, showing how they can be observed and measured. Different types of feedbacks systems will then be presented as examples of real implementations that belong to the history of multi-bunch feedback sy...

Multi-bunch Feedback Systems

CERN Document Server

Lonza, M.

2014-12-19

Coupled-bunch instabilities excited by the interaction of the particle beam with its surroundings can seriously limit the performance of circular particle accelerators. These instabilities can be cured by the use of active feedback systems based on sensors capable of detecting the unwanted beam motion and actuators that apply the feedback correction to the beam. Advances in electronic technology now allow the implementation of feedback loops using programmable digital systems. Besides important advantages in terms of flexibility and reproducibility, digital systems open the way to the use of novel diagnostic tools and additional features. We first introduce coupled-bunch instabilities, analysing the equation of motion of charged particles and the different modes of oscillation of a multi-bunch beam, showing how they can be observed and measured. Different types of feedback systems will then be presented as examples of real implementations that belong to the history of multi-bunch feedback systems. The main co...

Providing Feedback: Practical Skills and Strategies.

Science.gov (United States)

Sarkany, David; Deitte, Lori

2017-06-01

Feedback is an essential component of education. It is designed to influence, reinforce, and change behaviors, concepts, and attitudes in learners. Although providing constructive feedback can be challenging, it is a learnable skill. The negative consequences of destructive feedback or lack of feedback all together are far-reaching. This article summarizes the components of constructive feedback and provides readers with tangible skills to enhance their ability to give effective feedback to learners and peers. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

Large-scale in vitro expansion of polyclonal human switched-memory B lymphocytes.

Directory of Open Access Journals (Sweden)

Sonia Néron

Full Text Available Polyclonal preparations of therapeutic immunoglobulins, namely intravenous immunoglobulins (IVIg, are essential in the treatment of immunodeficiency and are increasingly used for the treatment of autoimmune and inflammatory diseases. Currently, patients' accessibility to IVIg depends exclusively upon volunteer blood donations followed by the fractionation of pooled human plasma obtained from thousands of individuals. Presently, there are no in vitro cell culture procedures allowing the preparation of polyclonal human antibodies. All in vitro human therapeutic antibodies that are currently generated are based on monoclonal antibodies, which are mostly issued from genetic engineering or single cell antibody technologies. Here, we describe an in vitro cell culture system, using CD40-CD154 interactions, that leads to a 1×10(6-fold expansion of switched memory B lymphocytes in approximately 50 days. These expanded cells secrete polyclonal IgG, which distribution into IgG(1, IgG(2, IgG(3 and IgG(4 is similar to that of normal human serum. Such in vitro generated IgG showed relatively low self-reactivity since they interacted moderately with only 24 human antigens among a total of 9484 targets. Furthermore, up to one liter of IgG secreting cells can be produced in about 40 days. This experimental model, providing large-scale expansion of human B lymphocytes, represents a critical step toward the in vitro production of polyclonal human IgG and a new method for the ex vivo expansion of B cells for therapeutic purposes.

Training Peer-Feedback Skills on Geometric Construction Tasks: Role of Domain Knowledge and Peer-Feedback Levels

Science.gov (United States)

Alqassab, Maryam; Strijbos, Jan-Willem; Ufer, Stefan

2018-01-01

Peer feedback is widely used to train assessment skills and to support collaborative learning of various learning tasks, but research on peer feedback in the domain of mathematics is limited. Although domain knowledge seems to be a prerequisite for peer-feedback provision, it only recently received attention in the peer-feedback literature. In…

Trihydroborates and dihydroboranes bearing a pentacoordinated phosphorus atom: double ring expansion to balance the coordination states

Energy Technology Data Exchange (ETDEWEB)

Kano, Naokazu; O' Brien, Nathan J. [Department of Chemistry, Graduate School of Science, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-0033 (Japan); Uematsu, Ryohei; Ramozzi, Romain; Morokuma, Keiji [Fukui Institute for Fundamental Chemistry, Kyoto University, Takano-Nishihiraki-cho 34-4, Sakyou-ku, Kyoto, 606-8103 (Japan)

2017-05-15

The first trihydroborate bearing a pentacoordinated phosphorus atom was synthesized as a new P-B bonded compound. Hydride abstraction of the trihydroborate gave an intermediary dihydroborane, which showed hydroboration reactivity and was trapped with pyridine whilst maintaining the P-B bond. The dihydroborane underwent a rearrangement, which involved a double ring expansion to compensate for the unbalanced coordination states of the phosphorus and boron atoms, to give a new fused bicyclic phosphine-boronate. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Trihydroborates and dihydroboranes bearing a pentacoordinated phosphorus atom: double ring expansion to balance the coordination states

International Nuclear Information System (INIS)

Kano, Naokazu; O'Brien, Nathan J.; Uematsu, Ryohei; Ramozzi, Romain; Morokuma, Keiji

2017-01-01

The first trihydroborate bearing a pentacoordinated phosphorus atom was synthesized as a new P-B bonded compound. Hydride abstraction of the trihydroborate gave an intermediary dihydroborane, which showed hydroboration reactivity and was trapped with pyridine whilst maintaining the P-B bond. The dihydroborane underwent a rearrangement, which involved a double ring expansion to compensate for the unbalanced coordination states of the phosphorus and boron atoms, to give a new fused bicyclic phosphine-boronate. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Sustainable feedback: students’ and tutors’ perceptions

NARCIS (Netherlands)

Geitz, Gerry; Joosten-ten Brinke, Desirée; Kirschner, Paul A.

2018-01-01

Feedback has been shown to substantially influence students’ learning. However, not everything characterized as feedback is effective. Sustainable feedback places students in an active role in which they generate and use feedback from peers, self or others and aims at developing lifelong learning

Multi-bunch Feedback Systems

OpenAIRE

Lonza, M.; Schmickler, H.

2016-01-01

Coupled-bunch instabilities excited by the interaction of the particle beam with its surroundings can seriously limit the performance of circular particle accelerators. These instabilities can be cured by the use of active feedback systems based on sensors capable of detecting the unwanted beam motion and actuators that apply the feedback correction to the beam. Advances in electronic technology now allow the implementation of feedback loops using programmable digital systems. Besides importa...

Sub-fragmentation of structural-reactive-material casings under explosion

Science.gov (United States)

Zhang, Fan

2015-06-01

The sub-fragmentation of structural reactive material (SRM) thick-casings is to generate fine fragments during casing fragmentation under explosive loading for their efficient energy release to enhance air blast. This has been investigated using a cylindrical casing made from either rich Al-MoO3 or Al-W-based granular composites. The former composite was to study the concept of reactive hot spots where the reaction of reactive particles, which were distributed into base SRM in a fuel-rich equivalence ratio, created heat and gas products during SRM fragmentation. The expansion of these distributed hot spots initiated local fractures of the casing, leading to fine fragments. The Al-W-based composite investigated the concept of impedance mismatch, where shock dynamics at the interfaces of different impedance ingredients resulted in non-uniform, high local temperatures and stresses and late in times the dissimilar inertia resulted in different accelerations, leading to material separation and fine fragments. The casings were manufactured through both hot iso-static pressing and cold gas dynamic spray deposition. Explosion experiments were conducted in a 3 m diameter, 23 m3 cylindrical chamber for these cased charges in a casing-to-explosive mass ratio of 1.75. The results demonstrated the presence of fine fragments and more efficient fragment combustion, compared with previous results, and indicated the effectiveness of both concepts. This work was jointly funded by Defence R&D Canada and the Advanced Energetics Program of DTRA (Dr. William H. Wilson).

Influence of feedback characteristics on perceived learning value of feedback in clerkships : does culture matter?

NARCIS (Netherlands)

Suhoyo, Yoyo; Van Hell, Elisabeth A.; Kerdijk, Wouter; Emilia, Ova; Schonrock-Adema, Johanna; Kuks, Jan B. M.; Cohen-Schotanus, Janke

2017-01-01

Background: Various feedback characteristics have been suggested to positively influence student learning. It is not clear how these feedback characteristics contribute to students' perceived learning value of feedback in cultures classified low on the cultural dimension of individualism and high on

Influence of feedback characteristics on perceived learning value of feedback in clerkships : does culture matter?

NARCIS (Netherlands)

Suhoyo, Yoyo; Van Hell, Elisabeth A; Kerdijk, Wouter; Emilia, Ova; Schönrock-Adema, Johanna; Kuks, Jan B M; Cohen-Schotanus, Janke

2017-01-01

BACKGROUND: Various feedback characteristics have been suggested to positively influence student learning. It is not clear how these feedback characteristics contribute to students' perceived learning value of feedback in cultures classified low on the cultural dimension of individualism and high on

"Are You Listening Please?" The Advantages of Electronic Audio Feedback Compared to Written Feedback

Science.gov (United States)

Lunt, Tom; Curran, John

2010-01-01

Feedback on students' work is, probably, one of the most important aspects of learning, yet students' report, according to the National Union of Students (NUS) Survey of 2008, unhappiness with the feedback process. Students were unhappy with the quality, detail and timing of feedback. This paper examines the benefits of using audio, as opposed to…

The Impact of Middle-School Students' Feedback Choices and Performance on Their Feedback Memory

Science.gov (United States)

Cutumisu, Maria; Schwartz, Daniel L.

2016-01-01

This paper presents a novel examination of the impact of students' feedback choices and performance on their feedback memory. An empirical study was designed to collect the choices to seek critical feedback from a hundred and six Grade 8 middle-school students via Posterlet, a digital assessment game in which students design posters. Upon…

Fuel motion in overpower tests of metallic integral fast reactor fuel

International Nuclear Information System (INIS)

Rhodes, E.A.; Bauer, T.H.; Stanford, G.S.; Regis, J.P.; Dickerman, C.E.

1992-01-01

In this paper results from hodoscope data analyses are presented for transient overpower (TOP) tests M5, M6, and M7 at the Transient Reactor Test Facility, with emphasis on transient feedback mechanisms, including prefailure expansion at the tops of the fuel pins, subsequent dispersive axial fuel motion, and losses in relative worth of the fuel pins during the tests. Tests M5 and M6 were the first TOP tests of margin to cladding breach and prefailure elongation of D9-clad ternary (U-Pu-Zr) integral fast reactor-type fuel. Test M7 extended these results to high-burnup fuel and also initiated transient testing of HT-9-clad binary (U-Zr) Fast Flux Test Facility driver fuel. Results show significant prefailure negative reactivity feedback and strongly negative feedback from fuel driven to failure

Feedback, Incentives and Peer Effects

DEFF Research Database (Denmark)

Eriksson, Tor Viking; Poulsen, Anders; Villeval, Marie Claire

This paper experimentally investigates the impact of different pay and relative performance information policies on employee effort. We explore three information policies: No feedback, feedback given halfway through the production period, and continuously updated feedback about relative performan...... behind, and frontrunners do not slack off....

Common-Message Broadcast Channels with Feedback in the Nonasymptotic Regime: Full Feedback

DEFF Research Database (Denmark)

Trillingsgaard, Kasper Fløe; Yang, Wei; Durisi, Giuseppe

2018-01-01

We investigate the maximum coding rate achievable on a two-user broadcast channel for the case where a common message is transmitted with feedback using either fixed-blocklength codes or variable-length codes. For the fixed-blocklength-code setup, we establish nonasymptotic converse and achievabi......We investigate the maximum coding rate achievable on a two-user broadcast channel for the case where a common message is transmitted with feedback using either fixed-blocklength codes or variable-length codes. For the fixed-blocklength-code setup, we establish nonasymptotic converse...... and achievability bounds. An asymptotic analysis of these bounds reveals that feedback improves the second-order term compared to the no-feedback case. In particular, for a certain class of anti-symmetric broadcast channels, we show that the dispersion is halved. For the variable-length-code setup, we demonstrate...

Effects of externally supplied lithium on the suppression of ASR expansion in mortars

International Nuclear Information System (INIS)

Kawamura, Mitsunori; Kodera, Takeshi

2005-01-01

Lithium salts are being externally supplied for mitigating the progress of deterioration of ASR-affected concrete structures. However, it is not clear whether the sodium or potassium in the ASR gel in concrete is replaced by the lithium supplied from the outside. In this article, we examine changes in the composition of the ASR gel, previously formed in mortar specimens, after they are immersed in LiOH solution, using backscattered electron (BSE) imaging and energy-dispersive X-ray (EDX) analysis, associated with length change measurement of the mortar prisms. The intrusion of lithium ions into mortar specimens containing a reactive aggregate could arrest their further expansion within a relatively short time after immersion in 0.50 N LiOH solution. The alkali ions incorporated in most ASR gels, located not far away from interfaces between the cement paste and reactive aggregate particles, appear to be replaced by the lithium ions supplied from the solution. However, the ASR gel within the reacted aggregate particles did not appear to have been affected by the lithium ions

Energy expansion planning by considering electrical and thermal expansion simultaneously

International Nuclear Information System (INIS)

Abbasi, Ali Reza; Seifi, Ali Reza

2014-01-01

Highlights: • This paper focused on the expansion planning optimization of energy systems. • Employing two form of energy: the expansion of electrical and thermal energies. • The main objective is to minimize the costs. • A new Modified Honey Bee Mating Optimization (MHBMO) algorithm is applied. - Abstract: This study focused on the expansion planning optimization of energy systems employing two forms of energy: the expansion of electrical and thermal energies simultaneously. The main objective of this investigation is confirming network adequacy by adding new equipment to the network, over a given planning horizon. The main objective of the energy expansion planning (EEP) is to minimize the real energy loss, voltage deviation and the total cost of installation equipments. Since the objectives are different and incommensurable, it is difficult to solve the problem by the conventional approaches that may optimize a single objective. So, the meta-heuristic algorithm is applied to this problem. Here, Honey Bee Mating Optimization algorithm (HBMO) as a new evolutionary optimization algorithm is utilized. In order to improve the total ability of HBMO for the global search and exploration, a new modification process is suggested such a way that the algorithm will search the total search space globally. Also, regarding the uncertainties of the new complicated energy systems, in this paper for the first time, the EEP problem is investigated in a stochastic environment by the use of probabilistic load flow technique based on Point Estimate Method (PEM). In order to evaluate the feasibility and effectiveness of the proposed algorithm, two modified test systems are used as case studies

The Effects of Post-observational Feedback Modes on Teaching Beliefs : Peer vs. Teacher-Mediated Feedback

Directory of Open Access Journals (Sweden)

İlknur Yuksel

2011-01-01

Full Text Available The aim of this study was to investigate whether the pre-service teachers' language teaching beliefs changed as a result of two different post-observational reşective feedback modes; teacher mediated and peer feedback, during their teaching practice. For each post-observational feedback mode, two groups of eight Turkish pre-service language teachers attending to the final year at English Language Teaching Department at Anadolu University, totally 16 pre-service teachers participated in the study. The qualitative and quantitative data was collected at the beginning and end of the different feedback treatments from each group. The results indicated that the feedback modes on pre-service teachers’ teaching practice could influence their beliefs about teaching. Peer feedback had a potential to change the teachers’ beliefs through critical reşection skills that were fostered as a result of collaboration within the peer group

Feedback as real-time constructions

DEFF Research Database (Denmark)

Keiding, Tina Bering; Qvortrup, Ane

2014-01-01

instant it takes place. This article argues for a clear distinction between the timing of communicative events, such as responses that are provided as help for feedback constructions, and the feedback construction itself as an event in a psychic system. Although feedback is described as an internal...

Bunch by bunch feedback systems

International Nuclear Information System (INIS)

Tobiyama, Makoto

2006-01-01

Outlines of bunch-by-bunch feedback systems for suppressing multibunch instabilities in electron/positron storage rings are presented. The design principles and functions of the feedback components are reviewed. Recent topics of applying very fast and dense FPGA as feedback signal processor are also shown. (author)

AGN feedback through UFO and galaxy-wide winds in the early Universe

Science.gov (United States)

Feruglio, C.; Piconcelli, E.; Bischetti, M.; Zappacosta, L.; Fiore, F.

2017-10-01

AGN feedback through massive molecular winds is today routinely observed in local AGN host galaxies, but not as such in the early universe. I will present the first evidence for a massive, AGN-driven molecular wind in the z 4 QSO APM08279, which also hosts the most well studied and persistent nuclear semi-raltivistic wind (UFO). This observation directly probes the expansion mechanism of a nuclear wind into the ISM on galaxy wide scales, that so far was constrained by a couple of other objects only (Feruglio et al. 2015, Tombesi et al. 2015). This result also opens the path toward the exploration of molecular AGN-driven winds at early epochs, close after the end of the Epoch of Reionisation (EoR).

Feedback Providing Improvement Strategies and Reflection on Feedback Use: Effects on Students' Writing Motivation, Process, and Performance

Science.gov (United States)

Duijnhouwer, Hendrien; Prins, Frans J.; Stokking, Karel M.

2012-01-01

This study investigated the effects of feedback providing improvement strategies and a reflection assignment on students' writing motivation, process, and performance. Students in the experimental feedback condition (n = 41) received feedback including improvement strategies, whereas students in the control feedback condition (n = 41) received…

Can corrective feedback improve recognition memory?

Science.gov (United States)

Kantner, Justin; Lindsay, D Stephen

2010-06-01

An understanding of the effects of corrective feedback on recognition memory can inform both recognition theory and memory training programs, but few published studies have investigated the issue. Although the evidence to date suggests that feedback does not improve recognition accuracy, few studies have directly examined its effect on sensitivity, and fewer have created conditions that facilitate a feedback advantage by encouraging controlled processing at test. In Experiment 1, null effects of feedback were observed following both deep and shallow encoding of categorized study lists. In Experiment 2, feedback robustly influenced response bias by allowing participants to discern highly uneven base rates of old and new items, but sensitivity remained unaffected. In Experiment 3, a false-memory procedure, feedback failed to attenuate false recognition of critical lures. In Experiment 4, participants were unable to use feedback to learn a simple category rule separating old items from new items, despite the fact that feedback was of substantial benefit in a nearly identical categorization task. The recognition system, despite a documented ability to utilize controlled strategic or inferential decision-making processes, appears largely impenetrable to a benefit of corrective feedback.

Engaging Students with Audio Feedback

Science.gov (United States)

Cann, Alan

2014-01-01

Students express widespread dissatisfaction with academic feedback. Teaching staff perceive a frequent lack of student engagement with written feedback, much of which goes uncollected or unread. Published evidence shows that audio feedback is highly acceptable to students but is underused. This paper explores methods to produce and deliver audio…

Eco-feedback for non-consumption

NARCIS (Netherlands)

Lim, V.; Jense, A.; Janmaat, J.; Funk, M.

2014-01-01

Eco-feedback is a strategy to increase awareness of resource use and to encourage conservation. We applied eco-feedback on household food waste with the prospective to increase awareness and explore its impact on food related decision-making. In this paper we present a prototype of an eco-feedback

A Journey towards Sustainable Feedback

Science.gov (United States)

Mutch, Allyson; Young, Charlotte; Davey, Tamzyn; Fitzgerald, Lisa

2018-01-01

Meeting students' expectations associated with the provision of feedback is a perennial challenge for tertiary education. Efforts to provide comprehensive, timely feedback within our own first year undergraduate public health courses have not always met students' expectations. In response, we sought to develop peer feedback activities to support…

Expansion joints for LMFBR

International Nuclear Information System (INIS)

Dzenus, M.; Hundhausen, W.; Jansing, W.

1980-01-01

This discourse recounts efforts put into the SNR-2 project; specifically the development of compensation devices. The various prototypes of these compensation devices are described and the state of the development reviewed. Large Na (sodium)-heat transfer systems require a lot of valuable space if the component lay-out does not include compensation devices. So, in order to condense the spatial requirement as much as possible, expansion joints must be integrated into the pipe system. There are two basic types to suit the purpose: axial expansion joints and angular expansion joints. The expansion joints were developed on the basis of specific design criteria whereby differentiation is made between expansion joints of small and large nominal diameter. Expansion joints for installation in the sodium-filled primary piping are equipped with safety bellows in addition to the actual working bellows. Expansion joints must be designed and mounted in a manner to completely withstand seismic forces. The design must exclude any damage to the bellows during intermittent operations, that is, when sodium is drained the bellows' folds must be completely empty; otherwise residual solidified sodium could destroy the bellows when restarting. The expansion joints must be engineered on the basis of the following design data for the secondary system of the SNR project: working pressure: 16 bar; failure mode pressure: 5 events; failure mode: 5 sec., 28.5 bar, 520 deg. C; working temperature: 520 deg. C; temperature transients: 30 deg. C/sec.; service life: 200,000 h; number of load cycles: 10 4 ; material: 1.4948 or 1.4919; layer thickness of folds: 0.5 mm; angular deflection (DN 800): +3 deg. C or; axial expansion absorption (DN 600): ±80 mm; calculation: ASME class. The bellows' development work is not handled within this scope. The bellows are supplied by leading manufacturers, and warrant highest quality. Multiple bellows were selected on the basis of maximum elasticity - a property

Control of conducting polymer actuators without physical feedback: simulated feedback control approach with particle swarm optimization

International Nuclear Information System (INIS)

Xiang, Xingcan; Mutlu, Rahim; Alici, Gursel; Li, Weihua

2014-01-01

Conducting polymer actuators have shown significant potential in articulating micro instruments, manipulation devices, and robotics. However, implementing a feedback control strategy to enhance their positioning ability and accuracy in any application requires a feedback sensor, which is extremely large in size compared to the size of the actuators. Therefore, this paper proposes a new sensorless control scheme without the use of a position feedback sensor. With the help of the system identification technique and particle swarm optimization, the control scheme, which we call the simulated feedback control system, showed a satisfactory command tracking performance for the conducting polymer actuator’s step and dynamic displacement responses, especially under a disturbance, without needing a physical feedback loop, but using a simulated feedback loop. The primary contribution of this study is to propose and experimentally evaluate the simulated feedback control scheme for a class of the conducting polymer actuators known as tri-layer polymer actuators, which can operate both in dry and wet media. This control approach can also be extended to other smart actuators or systems, for which the feedback control based on external sensing is impractical. (paper)

The effects of feedback self-consistency, therapist status, and attitude toward therapy on reaction to personality feedback.

Science.gov (United States)

Collins, David R; Stukas, Arthur A

2006-08-01

Individuals' reactions to interpersonal feedback may depend on characteristics of the feedback and the feedback source. The present authors examined the effects of experimentally manipulated personality feedback that they--in the guise of therapists--e-mailed to participants on the degree of their acceptance of the feedback. Consistent with Self-Verification Theory (W. B. Swann Jr., 1987), participants accepted feedback that was consistent with their self-views more readily than they did feedback that was inconsistent with their self-views. Furthermore, the authors found main effects for therapist's status and participant's attitude toward therapy. Significant interactions showed effects in which high-status therapists and positive client attitudes increased acceptance of self-inconsistent feedback, effects that were only partially mediated by clients' perceptions of therapist competence. The present results indicate the possibility that participants may be susceptible to self-concept change or to self-fulfilling prophecy effects in therapy when they have a positive attitude toward therapy or are working with a high-status therapist.

The Effects of Source, Revision Possibility, and Amount of Feedback on Marketing Students' Impressions of Feedback on an Assignment

Science.gov (United States)

Ackerman, David S.; Dommeyer, Curt J.; Gross, Barbara L.

2017-01-01

This study examines how three factors affect students' reactions to critical feedback on an assignment--amount of feedback (none vs. low amount vs. high amount), source of feedback (instructor-provided feedback vs. peer-provided feedback), and the situational context of the feedback (revision of paper is or is not possible). An incomplete 3 × 2 ×…

Expansion joints for LMFBR

Energy Technology Data Exchange (ETDEWEB)

Dzenus, M.; Hundhausen, W.; Jansing, W.

1979-10-15

This discourse recounts efforts put into the SNR-2 project; specifically the development of compensation devices. The various prototypes of these compensation devices are described and the state of development reviewed. The expansion joints were developed on the basis of specific design criteria whereby differentiation is made between expansion joints of small and large nominal diameter. Expansion joints for installation in the sodium-filled primary piping are equipped with safety bellows in addition to the actual working bellows.

Lateral expansion and carbon exchange of a boreal peatland in Finland resulting in 7000 years of positive radiative forcing

Science.gov (United States)

Mathijssen, Paul J. H.; Kähkölä, Noora; Tuovinen, Juha-Pekka; Lohila, Annalea; Minkkinen, Kari; Laurila, Tuomas; Väliranta, Minna

2017-03-01

Data on past peatland growth patterns, vegetation development, and carbon (C) dynamics during the various Holocene climate phases may help us to understand possible future climate-peatland feedback mechanisms. In this study, we analyzed and radiocarbon dated several peat cores from Kalevansuo, a drained bog in southern Finland. We investigated peatland succession and C dynamics throughout the Holocene. These data were used to reconstruct the long-term atmospheric radiative forcing, i.e., climate impact of the peatland since initiation. Kalevansuo peat records revealed a general development from fen to bog, typical for the southern boreal zone, but the timing of ombrotrophication varied in different parts of the peatland. Peat accumulation patterns and lateral expansion through paludification were influenced by fires and climate conditions. Long-term C accumulation rates were overall lower than the average values found from literature. We suggest the low accumulation rates are due to repeated burning of the peat surface. Drainage for forestry resulted in a nearly complete replacement of typical bog mosses by forest species within 40 years after drainage. The radiative forcing reconstruction suggested positive values (warming) for the first 7000 years following initiation. The change from positive to negative forcing was triggered by an expansion of bog vegetation cover and later by drainage. The strong relationship between peatland area and peat type with radiative forcing suggests a possible feedback for future changing climate, as high-latitude peatlands may experience prominent regime shifts, such as fen to bog transitions.

Feedback en educación médica Feedback in medical education

Directory of Open Access Journals (Sweden)

J.M. Fornells

2008-03-01

Full Text Available La propuesta de un modelo centrado en la persona que aprende y el desarrollo de estrategias de aprender a aprender persigue que los estudiantes sean más reflexivos y más autónomos en su propio proceso de aprendizaje y que se conviertan en los protagonistas de dicho proceso. Se trata, en definitiva, de dar los elementos necesarios a los estudiantes para que puedan autogestionar un proceso de aprendizaje permanente a lo largo de toda su vida profesional, una cuestión crucial en un contexto de evolución constante de los conocimientos. El feedback sería el retorno de información sobre su proceso de aprendizaje de acuerdo con unos objetivos preestablecidos. El feedback presenta información y no juicio, a diferencia de la evaluación, en consecuencia siempre es formativo. El feedback no es un fin en sí mismo sino un instrumento que informa al estudiante sobre su proceso de aprendizaje y facilita los cambios necesarios. El feedback estructurado y centrado en quien aprende se caracteriza por: autorreflexión del estudiante, centrado en quien aprende, preparación previa y relación de confianza tutor-residente.The proposal of a learner-centered model and the development of strategies for learning to learn, intends that students are more reflective and more independent in their own learning process and that they become the protagonists of this process. It really tries to give the students the necessary elements so that they can selfmanage a process of permanent learning throughout their professional life, a crucial question in a context of constant evolution of the knowledge. The return of information on the process of learning, in agreement with preestablished objectives. Feedback presents/displays information and is nonjudgemental, unlike the evaluation. Feedback always is formative. Feedback is not an aim in itself, but an instrument that informs the student on its process of learning and facilitates the necessary changes. Structured and

Neural cryptography with feedback.

Science.gov (United States)

Ruttor, Andreas; Kinzel, Wolfgang; Shacham, Lanir; Kanter, Ido

2004-04-01

Neural cryptography is based on a competition between attractive and repulsive stochastic forces. A feedback mechanism is added to neural cryptography which increases the repulsive forces. Using numerical simulations and an analytic approach, the probability of a successful attack is calculated for different model parameters. Scaling laws are derived which show that feedback improves the security of the system. In addition, a network with feedback generates a pseudorandom bit sequence which can be used to encrypt and decrypt a secret message.

Det ved vi om Feedback

DEFF Research Database (Denmark)

Christensen, Vibeke; Bærenholdt, Jørgen

Præsentation af forskningsviden om feedback i forskellige personkonstellationer i undervisningen: Feedback fra lærer til elev, fra elever til lærer, fra elev til elev og elevens eget arbejde med feedback til sig selv. De præsenterede forskningsresultater er udvalgt dels inden for en kognitivistisk...

Multiple greenhouse gas feedbacks from the land biosphere under future climate change scenarios

Science.gov (United States)

Stocker, Benjamin; Roth, Raphael; Joos, Fortunat; Spahni, Renato; Steinacher, Marco; Zaehle, Soenke; Bouwman, Lex; Xu-Ri, Xu-Ri; Prentice, Colin

2013-04-01

Atmospheric concentrations of the three important greenhouse gases (GHG) CO2, CH4, and N2O are mediated by processes in the terrestrial biosphere. The sensitivity of terrestrial GHG emissions to climate and CO2 contributed to the sharp rise in atmospheric GHG concentrations since preindustrial times and leads to multiple feedbacks between the terrestrial biosphere and the climate system. The strength of these feedbacks is determined by (i) the sensitivity of terrestrial GHG emissions to climate and CO2 and (ii) the greenhouse warming potential of the respective gas. Here, we quantify feedbacks from CO2, CH4, N2O, and land surface albedo in a consistent and comprehensive framework based on a large set of simulations conducted with an Earth System Model of Intermediate Complexity. The modeled sensitivities of CH4 and N2O emissions are tested, demonstrating that independent data for non-land (anthropogenic, oceanic, etc.) GHG emissions, combined with simulated emissions from natural and agricultural land reproduces historical atmospheric budgets within their uncertainties. 21st-century scenarios for climate, land use change and reactive nitrogen inputs (Nr) are applied to investigate future GHG emissions. Results suggest that in a business-as-usual scenario, terrestrial N2O emissions increase from 9.0 by today to 9.8-11.1 (RCP 2.6) and 14.2-17.0 TgN2O-N/yr by 2100 (RCP 8.5). Without anthropogenic Nr inputs, the amplification is reduced by 24-32%. Soil CH4 emissions increase from 221 at present to 228-245 in RCP 2.6 and to 303-343 TgCH4/yr in RCP 8.5, and the land becomes a net source of C by 2100 AD. Feedbacks from land imply an additional warming of 1.3-1.5°C by 2300 in RCP 8.5, 0.4-0.5°C of which are due to N2O and CH4. The combined effect of multiple GHGs and albedo represents an increasingly positive total feedback to anthropogenic climate change with positive individual feedbacks from CH4, N2O, and albedo outweighing the diminishing negative feedback from CO2

Tactile feedback improves auditory spatial localization

Directory of Open Access Journals (Sweden)

Monica eGori

2014-10-01

Full Text Available Our recent studies suggest that congenitally blind adults have severely impaired thresholds in an auditory spatial-bisection task, pointing to the importance of vision in constructing complex auditory spatial maps (Gori et al., 2014. To explore strategies that may improve the auditory spatial sense in visually impaired people, we investigated the impact of tactile feedback on spatial auditory localization in 48 blindfolded sighted subjects. We measured auditory spatial bisection thresholds before and after training, either with tactile feedback, verbal feedback or no feedback. Audio thresholds were first measured with a spatial bisection task: subjects judged whether the second sound of a three sound sequence was spatially closer to the first or the third sound. The tactile-feedback group underwent two audio-tactile feedback sessions of 100 trials, where each auditory trial was followed by the same spatial sequence played on the subject’s forearm; auditory spatial bisection thresholds were evaluated after each session. In the verbal-feedback condition, the positions of the sounds were verbally reported to the subject after each feedback trial. The no-feedback group did the same sequence of trials, with no feedback. Performance improved significantly only after audio-tactile feedback. The results suggest that direct tactile feedback interacts with the auditory spatial localization system, possibly by a process of cross-sensory recalibration. Control tests with the subject rotated suggested that this effect occurs only when the tactile and acoustic sequences are spatially coherent. Our results suggest that the tactile system can be used to recalibrate the auditory sense of space. These results encourage the possibility of designing rehabilitation programs to help blind persons establish a robust auditory sense of space, through training with the tactile modality.

Feedback to Managers, Volume II: A Review and Comparison of Sixteen Multi-Rater Feedback Instruments.

Science.gov (United States)

Van Velsor, Ellen; Leslie, Jean Brittain

"Feedback to Managers" is a two-volume report. Volume 2 compares 16 of the better feedback instruments available. The following are the instruments: (1) ACUMEN Group Feedback; (2) BENCHMARKS; (3) the Campbell Leadership Index; (4) COMPASS: the Managerial Practices Survey; (5) the Executive Success Profile; (6) Leader Behavior Analysis…

Phase behavior and reactive transport of partial melt in heterogeneous mantle model

Science.gov (United States)

Jordan, J.; Hesse, M. A.

2013-12-01

The reactive transport of partial melt is the key process that leads to the chemical and physical differentiation of terrestrial planets and smaller celestial bodies. The essential role of the lithological heterogeneities during partial melting of the mantle is increasingly recognized. How far can enriched melts propagate while interacting with the ambient mantle? Can the melt flow emanating from a fertile heterogeneity be localized through a reactive infiltration feedback in a model without exogenous factors or contrived initial conditions? A full understanding of the role of heterogeneities requires reactive melt transport models that account for the phase behavior of major elements. Previous work on reactive transport in the mantle focuses on trace element partitioning; we present the first nonlinear chromatographic analysis of reactive melt transport in systems with binary solid solution. Our analysis shows that reactive melt transport in systems with binary solid solution leads to the formation of two separate reaction fronts: a slow melting/freezing front along which enthalpy change is dominant and a fast dissolution/precipitation front along which compositional changes are dominated by an ion-exchange process over enthalpy change. An intermediate state forms between these two fronts with a bulk-rock composition and enthalpy that are not necessarily bounded by the bulk-rock composition and enthalpy of either the enriched heterogeneity or the depleted ambient mantle. The formation of this intermediate state makes it difficult to anticipate the porosity changes and hence the stability of reaction fronts. Therefore, we develop a graphical representation for the solution that allows identification of the intermediate state by inspection, for all possible bulk-rock compositions and enthalpies of the heterogeneity and the ambient mantle. We apply the analysis to the partial melting of an enriched heterogeneity. This leads to the formation of moving precipitation

Expansions for Coulomb wave functions

NARCIS (Netherlands)

Boersma, J.

1969-01-01

In this paper we derive a number of expansions for Whittaker functions, regular and irregular Coulomb wave functions. The main result consists of a new expansion for the irregular Coulomb wave functions of orders zero and one in terms of regular Coulomb wave functions. The latter expansions are

ABCDEFG IS - the principle of constructive feedback.

Science.gov (United States)

Bhattarai, M

2007-01-01

Feedback is an integral part of any learning experience. Constructive feedback is a powerful instrument and facilitates the learner's professional and personal development. "ABCDEFG IS", a mnemonic for the principles of constructive feedback, stands for Amount of the information, Benefit of the trainees, Change behaviour, Descriptive language, Environment, Focused, Group check, Interpretation check, and Sharing information. The eight important steps of feedback are: Ensure prior information, Collect data, Make appropriate meeting arrangement, Begin by encouraging self assessment by the trainee, Highlight areas where the trainee is doing well, Give feedback, Handle reaction maintaining the dignity and Plan actions. Communication and reflection also share many of the principles and steps of constructive feedback and giving regular feedback, thus, helps to improve communication and reflection. The feedback provider would be able to provide genuine feedback by following the appropriate steps and principles of constructive feedback and realize how important and rewarding its role is in teaching learning activities.

Rotating and standing waves in a diffractive nonlinear optical system with delayed feedback under O(2) Hopf bifurcation

Science.gov (United States)

Budzinskiy, S. S.; Razgulin, A. V.

2017-08-01

In this paper we study one-dimensional rotating and standing waves in a model of an O(2)-symmetric nonlinear optical system with diffraction and delay in the feedback loop whose dynamics is governed by a system of coupled delayed parabolic equation and linear Schrodinger-type equation. We elaborate a two-step approach: transition to a rotating coordinate system to obtain the profiles of the waves as small parameter expansions and the normal form technique to study their qualitative dynamic behavior and stability. Theoretical results stand in a good agreement with direct computer simulations presented.

Leadership in Libraries--Feedback as Communication.

Science.gov (United States)

Wright, Dianne H.

This paper focuses on the role of feedback in effective communication and ways in which feedback can assist library managers at all levels in performing their role as leaders. The various kinds and sources of feedback are discussed, and the relationship between feedback and goal setting are considered, as well as the effects of goal setting and…

Opportunistic Relay Selection With Limited Feedback

KAUST Repository

Eltayeb, Mohammed E.

2015-08-01

Relay selection is a simple technique that achieves spatial diversity in cooperative relay networks. Generally, relay selection algorithms require channel state information (CSI) feedback from all cooperating relays to make a selection decision. This requirement poses two important challenges, which are often neglected in the literature. Firstly, the fed back channel information is usually corrupted by additive noise. Secondly, CSI feedback generates a great deal of feedback overhead (air-time) that could result in significant performance hits. In this paper, we propose a compressive sensing (CS) based relay selection algorithm that reduces the feedback overhead of relay networks under the assumption of noisy feedback channels. The proposed algorithm exploits CS to first obtain the identity of a set of relays with favorable channel conditions. Following that, the CSI of the identified relays is estimated using least squares estimation without any additional feedback. Both single and multiple relay selection cases are considered. After deriving closed-form expressions for the asymptotic end-to-end SNR at the destination and the feedback load for different relaying protocols, we show that CS-based selection drastically reduces the feedback load and achieves a rate close to that obtained by selection algorithms with dedicated error-free feedback. © 1972-2012 IEEE.

Reactive Kripke semantics

CERN Document Server

Gabbay, Dov M

2013-01-01

This text offers an extension to the traditional Kripke semantics for non-classical logics by adding the notion of reactivity. Reactive Kripke models change their accessibility relation as we progress in the evaluation process of formulas in the model. This feature makes the reactive Kripke semantics strictly stronger and more applicable than the traditional one. Here we investigate the properties and axiomatisations of this new and most effective semantics, and we offer a wide landscape of applications of the idea of reactivity. Applied topics include reactive automata, reactive grammars, rea

Can performance feedback during instruction boost knowledge acquisition? Contrasting criterion-based and social comparison feedback

NARCIS (Netherlands)

Kolloffel, Bas Jan; de Jong, Anthonius J.M.

2016-01-01

Feedback indicating how well students are performing during a learning task can be very stimulating. In this study with a pre- and post-test design, the effects of two types of performance feedback on learning results were compared: feedback during a learning task was either stated in terms of how

Feedbacks in human-landscape systems

Science.gov (United States)

Chin, Anne

2015-04-01

As human interactions with Earth systems intensify in the "Anthropocene", understanding the complex relationships among human activity, landscape change, and societal responses to those changes is increasingly important. Interdisciplinary research centered on the theme of "feedbacks" in human-landscape systems serves as a promising focus for unraveling these interactions. Deciphering interacting human-landscape feedbacks extends our traditional approach of considering humans as unidirectional drivers of change. Enormous challenges exist, however, in quantifying impact-feedback loops in landscapes with significant human alterations. This paper illustrates an example of human-landscape interactions following a wildfire in Colorado (USA) that elicited feedback responses. After the 2012 Waldo Canyon Fire, concerns for heightened flood potential and debris flows associated with post-fire hydrologic changes prompted local landowners to construct tall fences at the base of a burned watershed. These actions changed the sediment transport regime and promoted further landscape change and human responses in a positive feedback cycle. The interactions ultimately increase flood and sediment hazards, rather than dampening the effects of fire. A simple agent-based model, capable of integrating social and hydro-geomorphological data, demonstrates how such interacting impacts and feedbacks could be simulated. Challenges for fully capturing human-landscape feedback interactions include the identification of diffuse and subtle feedbacks at a range of scales, the availability of data linking impact with response, the identification of multiple thresholds that trigger feedback mechanisms, and the varied metrics and data needed to represent both the physical and human systems. By collaborating with social scientists with expertise in the human causes of landscape change, as well as the human responses to those changes, geoscientists could more fully recognize and anticipate the coupled

Social provocation modulates decision making and feedback processing: Examining the trajectory of development in adolescent participants

Directory of Open Access Journals (Sweden)

Hannah L. Pincham

2015-10-01

Full Text Available Increasingly, research is turning to the ways in which social context impacts decision making and feedback processing in adolescents. The current study recorded electroencephalography to examine the trajectory of development across adolescence, with a focus on how social context impacts cognition and behaviour. To that end, younger (10–12 years and older (14–16 years adolescents played a modified Taylor Aggression Paradigm against two virtual opponents: a low-provoker and a high-provoker. During the task's decision phase (where participants select punishment for their opponent, we examined two event-related potentials: the N2 and the late positive potential (LPP. During the outcome phase (where participants experience win or loss feedback, we measured the feedback related negativity (FRN. Although N2 amplitudes did not vary with provocation, LPP amplitudes were enhanced under high provocation for the younger group, suggesting that emotional reactivity during the decision phase was heightened for early adolescents. During the outcome phase, the FRN was reduced following win outcomes under high provocation for both groups, suggesting that a highly provocative social opponent may influence the reward response. Collectively, the data argue that social context is an important factor modulating neural responses in adolescent behavioural and brain development.

Controlling the unstable emission of a semiconductor laser subject to conventional optical feedback with a filtered feedback branch.

Science.gov (United States)

Ermakov, I V; Tronciu, V Z; Colet, Pere; Mirasso, Claudio R

2009-05-25

We show the advantages of controlling the unstable dynamics of a semiconductor laser subject to conventional optical feedback by means of a second filtered feedback branch. We give an overview of the analytical solutions of the double cavity feedback and show numerically that the region of stabilization is much larger when using a second branch with filtered feedback than when using a conventional feedback one.

Controlling the unstable emission of a semiconductor laser subject to conventional optical feedback with a filtered feedback branch

OpenAIRE

Ermakov, Ilya; Tronciu, Vasile; Colet, Pere; Mirasso, Claudio R.

2009-01-01

We show the advantages of controlling the unstable dynamics of a semiconductor laser subject to conventional optical feedback by means of a second filtered feedback branch. We give an overview of the analytical solutions of the double cavity feedback and show numerically that the region of stabilization is much larger when using a second branch with filtered feedback than when using a conventional feedback one.

Investigating Feedback on Practice Among Teachers: Coherence of Observed and Perceived Feedback

NARCIS (Netherlands)

Thurlings, Marieke; Vermeulen, Marjan; Bastiaens, Theo; Stijnen, Sjef

2018-01-01

Despite that benefits of feedback in student learning are reported in much research, little has been reported regarding the use of feedback from teach- ers to other teachers—a key tool in professional development. In this study, we triangulated data from videotaped peer coaching sessions, ques-

Electroencephalogy (EEG) Feedback in Decision-Making

Science.gov (United States)

2015-08-26

Electroencephalogy ( EEG ) Feedback In Decision- Making The goal of this project is to investigate whether Electroencephalogy ( EEG ) can provide useful...feedback when training rapid decision-making. More specifically, EEG will allow us to provide online feedback about the neural decision processes...Electroencephalogy ( EEG ) Feedback In Decision-Making Report Title The goal of this project is to investigate whether Electroencephalogy ( EEG ) can provide useful

Fast feedback for linear colliders

International Nuclear Information System (INIS)

Hendrickson, L.; Adolphsen, C.; Allison, S.; Gromme, T.; Grossberg, P.; Himel, T.; Krauter, K.; MacKenzie, R.; Minty, M.; Sass, R.

1995-01-01

A fast feedback system provides beam stabilization for the SLC. As the SLC is in some sense a prototype for future linear colliders, this system may be a prototype for future feedbacks. The SLC provides a good base of experience for feedback requirements and capabilities as well as a testing ground for performance characteristics. The feedback system controls a wide variety of machine parameters throughout the SLC and associated experiments, including regulation of beam position, angle, energy, intensity and timing parameters. The design and applications of the system are described, in addition to results of recent performance studies

Pre-Feedback Risk Expectancies and Reception of Low-Risk Health Feedback: Absolute and Comparative Lack of Reassurance.

Science.gov (United States)

Gamp, Martina; Renner, Britta

2016-11-01

Personalised health-risk assessment is one of the most common components of health promotion programs. Previous research on responses to health risk feedback has commonly focused on the reception of bad news (high-risk feedback). The reception of low-risk feedback has been comparably neglected since it is assumed that good news is reassuring and readily received. However, field studies suggest mixed responses to low-risk health feedback. Accordingly, we examine whether pre-feedback risk expectancies can mitigate the reassuring effects of good news. In two studies (N = 187, N = 565), after assessing pre-feedback risk expectancies, participants received low-risk personalised feedback about their own risk of developing (the fictitious) Tucson Chronic Fatigue Syndrome (TCFS). Study 2 also included peer TCFS risk status feedback. Afterwards, self- and peer-related risk perception for TCFS was assessed. In both studies, participants who expected to be at high risk but received good news (unexpected low-risk feedback) showed absolute lack of reassurance. Specifically, they felt at significantly greater TCFS risk than participants who received expected good news. Moreover, the unexpected low-risk group even believed that their risk was as high as (Study 1) or higher (Study 2) than that of their peers (comparative lack of reassurance). Results support the notion that high pre-feedback risk expectancies can mitigate absolute and comparative reassuring effects of good news. © 2016 The International Association of Applied Psychology.

Corrective Feedback, Learner Uptake, and Feedback Perception in a Chinese as a Foreign Language Classroom

Science.gov (United States)

Fu, Tingfeng; Nassaji, Hossein

2016-01-01

The role of corrective feedback in second language classrooms has received considerable research attention in the past few decades. However, most of this research has been conducted in English-teaching settings, either ESL or EFL. This study examined teacher feedback, learner uptake as well as learner and teacher perception of feedback in an adult…

Beam bunch feedback

International Nuclear Information System (INIS)

Lambertson, G.

1995-09-01

When the electromagnetic fields that are excited by the passage of a bundle of charged particles persist to act upon bunches that follow, then the motions of the bunches are coupled. This action between bunches circulating on a closed orbit can generate growing patterns of bunch excursions. Such growth can often be suppressed by feedback systems that detect the excursion and apply corrective forces to the bunches. To be addressed herein is feedback that acts on motions of the bunch body centers. In addition to being useful for suppressing the spontaneous growth of coupled-bunch motions, such feedback can be used to damp transients in bunches injected into an accelerator or storage ring; for hadrons which lack strong radiation damping, feedback is needed to avoid emittance growth through decoherence. Motions excited by noise in magnetic fields or accelerating rf can also be reduced by using this feedback. Whether the action is on motions that are transverse to the closed orbit or longitudinal, the arrangement is the same. Bunch position is detected by a pickup and that signal is processed and directed to a kicker that may act upon the same bunch or some other portion of the collective beam pattern. Transverse motion is an oscillation with angular frequency ν perpendicular ω o where ω o is the orbital frequency 2π line-integral o. Longitudinal synchrotron oscillation occurs at frequency ω s = ν s ω o . The former is much more rapid, ν perpendicular being on the order of 10 while ν s is typically about 10 minus 1 to 10 minus 2

Conformal expansions and renormalons

Energy Technology Data Exchange (ETDEWEB)

Rathsman, J.

2000-02-07

The coefficients in perturbative expansions in gauge theories are factorially increasing, predominantly due to renormalons. This type of factorial increase is not expected in conformal theories. In QCD conformal relations between observables can be defined in the presence of a perturbative infrared fixed-point. Using the Banks-Zaks expansion the authors study the effect of the large-order behavior of the perturbative series on the conformal coefficients. The authors find that in general these coefficients become factorially increasing. However, when the factorial behavior genuinely originates in a renormalon integral, as implied by a postulated skeleton expansion, it does not affect the conformal coefficients. As a consequence, the conformal coefficients will indeed be free of renormalon divergence, in accordance with previous observations concerning the smallness of these coefficients for specific observables. The authors further show that the correspondence of the BLM method with the skeleton expansion implies a unique scale-setting procedure. The BLM coefficients can be interpreted as the conformal coefficients in the series relating the fixed-point value of the observable with that of the skeleton effective charge. Through the skeleton expansion the relevance of renormalon-free conformal coefficients extends to real-world QCD.

Bearing-Mounting Concept Accommodates Thermal Expansion

Science.gov (United States)

Nespodzany, Robert; Davis, Toren S.

1995-01-01

Pins or splines allow radial expansion without slippage. Design concept for mounting rotary bearing accommodates differential thermal expansion between bearing and any structure(s) to which bearing connected. Prevents buildup of thermal stresses by allowing thermal expansion to occur freely but accommodating expansion in such way not to introduce looseness. Pin-in-slot configuration also maintains concentricity.

Pseudo-Haptic Feedback in Teleoperation.

Science.gov (United States)

Neupert, Carsten; Matich, Sebastian; Scherping, Nick; Kupnik, Mario; Werthschutzky, Roland; Hatzfeld, Christian

2016-01-01

In this paper, we develop possible realizations of pseudo-haptic feedback in teleoperation systems based on existing works for pseudo-haptic feedback in virtual reality and the intended applications. We derive four potential factors affecting the performance of haptic feedback (calculation operator, maximum displacement, offset force, and scaling factor), which are analyzed in three compliance identification experiments. First, we analyze the principle usability of pseudo-haptic feedback by comparing information transfer measures for teleoperation and direct interaction. Pseudo-haptic interaction yields well above-chance performance, while direct interaction performs almost perfectly. In order to optimize pseudo-haptic feedback, in the second study we perform a full-factorial experimental design with 36 subjects performing 6,480 trials with 36 different treatments. Information transfer ranges from 0.68 bit to 1.72 bit in a task with a theoretical maximum of 2.6 bit, with a predominant effect of the calculation operator and a minor effect of the maximum displacement. In a third study, short- and long-term learning effects are analyzed. Learning effects regarding the performance of pseudo-haptic feedback cannot be observed for single-day experiments. Tests over 10 days show a maximum increase in information transfer of 0.8 bit. The results show the feasibility of pseudo-haptic feedback for teleoperation and can be used as design basis for task-specific systems.

Artificial proprioceptive feedback for myoelectric control.

Science.gov (United States)

Pistohl, Tobias; Joshi, Deepak; Ganesh, Gowrishankar; Jackson, Andrew; Nazarpour, Kianoush

2015-05-01

The typical control of myoelectric interfaces, whether in laboratory settings or real-life prosthetic applications, largely relies on visual feedback because proprioceptive signals from the controlling muscles are either not available or very noisy. We conducted a set of experiments to test whether artificial proprioceptive feedback, delivered noninvasively to another limb, can improve control of a two-dimensional myoelectrically-controlled computer interface. In these experiments, participants were required to reach a target with a visual cursor that was controlled by electromyogram signals recorded from muscles of the left hand, while they were provided with an additional proprioceptive feedback on their right arm by moving it with a robotic manipulandum. Provision of additional artificial proprioceptive feedback improved the angular accuracy of their movements when compared to using visual feedback alone but did not increase the overall accuracy quantified with the average distance between the cursor and the target. The advantages conferred by proprioception were present only when the proprioceptive feedback had similar orientation to the visual feedback in the task space and not when it was mirrored, demonstrating the importance of congruency in feedback modalities for multi-sensory integration. Our results reveal the ability of the human motor system to learn new inter-limb sensory-motor associations; the motor system can utilize task-related sensory feedback, even when it is available on a limb distinct from the one being actuated. In addition, the proposed task structure provides a flexible test paradigm by which the effectiveness of various sensory feedback and multi-sensory integration for myoelectric prosthesis control can be evaluated.

Can Performance Feedback during Instruction Boost Knowledge Acquisition? Contrasting Criterion-Based and Social Comparison Feedback

Science.gov (United States)

Kollöffel, Bas; de Jong, Ton

2016-01-01

Feedback indicating how well students are performing during a learning task can be very stimulating. In this study with a pre- and post-test design, the effects of two types of performance feedback on learning results were compared: feedback during a learning task was either stated in terms of how well the students were performing relative to…

Control and diagnostic uses of feedback

International Nuclear Information System (INIS)

Sen, A. K.

2000-01-01

Recent results on multimode feedback control of magnetohydrodynamic (MHD) modes and a variety of diagnostic uses of feedback are summarized. First, is the report on reduction and scaling of transport under feedback. By controlling the fluctuation amplitudes and consequently the transport via feedback, it is found that the scaling of the diffusion coefficient is linear with root-mean-square rms fluctuation level. The scaling appears not to agree with any generic theory. A variety of other diagnostic uses of feedback have been developed. The primary goal is an experimental methodology for the determination of dynamic models of plasma turbulence, both for better transport understanding and more credible feedback controller designs. A specific motivation is to search for a low-order dynamic model, suitable for the convenient study of both transport and feedback. First, the time series analysis method is used for the determination of chaotic attractor dimension of plasma fluctuations. For ExB rotational flute modes it is found to be close to three, indicating that a low-order dynamic model may be adequate for transport prediction and feedback controller design. Second, a new method for direct experimental determination of nonlinear dynamical models of plasma turbulence using feedback has been developed. Specifically, the process begins with a standard three-wave coupling model and introduces a variable feedback gain. The power spectrum, delayed power spectrum, and bispectrum of fluctuations are then experimentally obtained. By varying the feedback gain continuously, an arbitrary number of numerical equations for a fixed number of unknowns can be generated. Their numerical solution yields the linear dispersion, as well as nonlinear coupling coefficients. This method has been successfully applied for ExB rotationally driven flute modes. (c) 2000 American Institute of Physics

Feedback-linearization and feedback-feedforward decentralized control for multimachine power system

Energy Technology Data Exchange (ETDEWEB)

De Tuglie, Enrico [Dipartimento di Ingegneria dell' Ambiente, e per lo Sviluppo Sostenibile - DIASS, Politecnico di Bari, Viale del Turismo 8, 74100 Taranto (Italy); Iannone, Silvio Marcello; Torelli, Francesco [Dipartimento di Elettrotecnica, ed Elettronica - DEE, Politecnico di Bari, Via Re David 200, 70125 Bari (Italy)

2008-03-15

In this paper a decentralized nonlinear controller for large-scale power systems is investigated. The proposed controller design is based on the input-output feedback linearization methodology. In order to overcome computational difficulties in adopting such methodology, the overall interconnected nonlinear system, given as n-order, is analyzed as a cascade connection of an n{sub 1}-order nonlinear subsystem and an n{sub 2}-order linear subsystem. The controller design is obtained by applying input-output feedback linearization to the nonlinear subsystem and adopting a tracking control scheme, based on feedback-feedforward technique, for the linear subsystem. In the assumed system model, which is characterised by an interconnected structure between generating units, a decentralised adaptive controller is implemented by decentralizing these constraints. The use of a totally decentralised controller implies a system performance decay with respect to performance when the system is equipped with a centralised controller. Fortunately, the robustness of the proposed controller, based on input-output feedback procedure, guarantees good performance in terms of disturbance even when disturbances are caused by decentralization of interconnection constraints. Test results, provided on the IEEE 30 bus test system, demonstrate the effectiveness and practical applicability of proposed methodology. (author)

Vibrotactile Feedback for Brain-Computer Interface Operation

Directory of Open Access Journals (Sweden)

Febo Cincotti

2007-01-01

Full Text Available To be correctly mastered, brain-computer interfaces (BCIs need an uninterrupted flow of feedback to the user. This feedback is usually delivered through the visual channel. Our aim was to explore the benefits of vibrotactile feedback during users' training and control of EEG-based BCI applications. A protocol for delivering vibrotactile feedback, including specific hardware and software arrangements, was specified. In three studies with 33 subjects (including 3 with spinal cord injury, we compared vibrotactile and visual feedback, addressing: (I the feasibility of subjects' training to master their EEG rhythms using tactile feedback; (II the compatibility of this form of feedback in presence of a visual distracter; (III the performance in presence of a complex visual task on the same (visual or different (tactile sensory channel. The stimulation protocol we developed supports a general usage of the tactors; preliminary experimentations. All studies indicated that the vibrotactile channel can function as a valuable feedback modality with reliability comparable to the classical visual feedback. Advantages of using a vibrotactile feedback emerged when the visual channel was highly loaded by a complex task. In all experiments, vibrotactile feedback felt, after some training, more natural for both controls and SCI users.

Feedback control of coupled-bunch instabilities

International Nuclear Information System (INIS)

Fox, J.D.; Eisen, N.; Hindi, H.; Linscott, I.; Oxoby, G.; Sapozhnikov, L.; Serio, M.

1993-05-01

The next generation of synchrotron light sources and particle accelerators will require active feedback systems to control multi-bunch instabilities. Stabilizing hundreds or thousands of potentially unstable modes in these accelerator designs presents many technical challenges. Feedback systems to stabilize coupled-bunch instabilities may be understood in the frequency domain (mode-based feedback) or in the time domain (bunch-by-bunch feedback). In both approaches an external amplifier system is used to create damping fields that prevent coupled-bunch oscillations from growing without bound. The system requirements for transverse (betatron) and longitudinal (synchrotron) feedback are presented, and possible implementation options developed. Feedback system designs based on digital signal-processing techniques are described. Experimental results are shown from a synchrotron oscillation damper in the SSRL/SLAC storage ring SPEAR that uses digital signal-processing techniques

Assessing Feedback in a Mobile Videogame.

Science.gov (United States)

Brand, Leah; Beltran, Alicia; Hughes, Sheryl; O'Connor, Teresia; Baranowski, Janice; Nicklas, Theresa; Chen, Tzu-An; Dadabhoy, Hafza R; Diep, Cassandra S; Buday, Richard; Baranowski, Tom

2016-06-01

Player feedback is an important part of serious games, although there is no consensus regarding its delivery or optimal content. "Mommio" is a serious game designed to help mothers motivate their preschoolers to eat vegetables. The purpose of this study was to assess optimal format and content of player feedback for use in "Mommio." The current study posed 36 potential "Mommio" gameplay feedback statements to 20 mothers using a Web survey and interview. Mothers were asked about the meaning and helpfulness of each feedback statement. Several themes emerged upon thematic analysis, including identifying an effective alternative in the case of corrective feedback, avoiding vague wording, using succinct and correct grammar, avoiding provocation of guilt, and clearly identifying why players' game choice was correct or incorrect. Guidelines are proposed for future feedback statements.

The effect of video-assisted oral feedback versus oral feedback on surgical communicative competences in undergraduate training.

Science.gov (United States)

Ruesseler, M; Sterz, J; Bender, B; Hoefer, S; Walcher, F

2017-08-01

Feedback can significantly improve future performance. Reviewing one's performance by video is discussed as useful adjunct to debriefing, particularly for non-technical skills. Communicative competencies are an essential part of daily clinical practice; thus should be taught and assessed during undergraduate training. The aim of this study was to compare the educational value of video-assisted feedback versus oral feedback in communicative competencies in the surgical context. Fourth-year medical students completed a 210-min training unit of 'taking patient's history and obtaining informed consents prior to surgery' using role plays. Oral feedback was received directly thereafter using agenda-led, outcome-based guidelines (ALOBA). In the study group, the role plays were video-taped and reviewed thereafter. Afterwards, students completed two OSCE stations, where they were assessed regarding their communicative competencies and the content of the clinical scenario. One-hundred students (49 receiving video-assisted feedback, 51 oral) participated in the study. Those receiving video-assisted feedback performed significantly better in overall score in both OSCE stations (p feedback offered a significant educational benefit over oral feedback alone during a simulated patient encounter in a surgical context.

Collective irrationality and positive feedback.

Science.gov (United States)

Nicolis, Stamatios C; Zabzina, Natalia; Latty, Tanya; Sumpter, David J T

2011-04-26

Recent experiments on ants and slime moulds have assessed the degree to which they make rational decisions when presented with a number of alternative food sources or shelter. Ants and slime moulds are just two examples of a wide range of species and biological processes that use positive feedback mechanisms to reach decisions. Here we use a generic, experimentally validated model of positive feedback between group members to show that the probability of taking the best of options depends crucially on the strength of feedback. We show how the probability of choosing the best option can be maximized by applying an optimal feedback strength. Importantly, this optimal value depends on the number of options, so that when we change the number of options the preference of the group changes, producing apparent "irrationalities". We thus reinterpret the idea that collectives show "rational" or "irrational" preferences as being a necessary consequence of the use of positive feedback. We argue that positive feedback is a heuristic which often produces fast and accurate group decision-making, but is always susceptible to apparent irrationality when studied under particular experimental conditions.

Collective irrationality and positive feedback.

Directory of Open Access Journals (Sweden)

Stamatios C Nicolis

Full Text Available Recent experiments on ants and slime moulds have assessed the degree to which they make rational decisions when presented with a number of alternative food sources or shelter. Ants and slime moulds are just two examples of a wide range of species and biological processes that use positive feedback mechanisms to reach decisions. Here we use a generic, experimentally validated model of positive feedback between group members to show that the probability of taking the best of options depends crucially on the strength of feedback. We show how the probability of choosing the best option can be maximized by applying an optimal feedback strength. Importantly, this optimal value depends on the number of options, so that when we change the number of options the preference of the group changes, producing apparent "irrationalities". We thus reinterpret the idea that collectives show "rational" or "irrational" preferences as being a necessary consequence of the use of positive feedback. We argue that positive feedback is a heuristic which often produces fast and accurate group decision-making, but is always susceptible to apparent irrationality when studied under particular experimental conditions.

Magnitude and reactivity consequences of moisture ingress into the modular High-Temperature Gas-Cooled Reactor core

International Nuclear Information System (INIS)

Smith, O.L.

1992-12-01

Inadvertent admission of moisture into the primary system of a modular high-temperature gas-cooled reactor has been identified in US Department of Energy-sponsored studies as an important safety concern. The work described here develops an analytical methodology to quantify the pressure and reactivity consequences of steam-generator tube rupture and other moisture-ingress-related incidents. Important neutronic and thermohydraulic processes are coupled with reactivity feedback and safety and control system responses. The rate and magnitude of steam buildup are found to be dominated by major system features such as break size compared with safety valve capacity and reliability and less sensitive to factors such as heat transfer coefficients. The results indicate that ingress transients progress at a slower pace than previously predicted by bounding analyses, with milder power overshoots and more time for operator or automatic corrective actions

Feedback systems for linear colliders

CERN Document Server

Hendrickson, L; Himel, Thomas M; Minty, Michiko G; Phinney, N; Raimondi, Pantaleo; Raubenheimer, T O; Shoaee, H; Tenenbaum, P G

1999-01-01

Feedback systems are essential for stable operation of a linear collider, providing a cost-effective method for relaxing tight tolerances. In the Stanford Linear Collider (SLC), feedback controls beam parameters such as trajectory, energy, and intensity throughout the accelerator. A novel dithering optimization system which adjusts final focus parameters to maximize luminosity contributed to achieving record performance in the 1997-98 run. Performance limitations of the steering feedback have been investigated, and improvements have been made. For the Next Linear Collider (NLC), extensive feedback systems are planned as an intregal part of the design. Feedback requiremetns for JLC (the Japanese Linear Collider) are essentially identical to NLC; some of the TESLA requirements are similar but there are significant differences. For NLC, algorithms which incorporate improvements upon the SLC implementation are being prototyped. Specialized systems for the damping rings, rf and interaction point will operate at hi...

δ expansion applied to quantum electrodynamics

International Nuclear Information System (INIS)

Bender, C.M.; Boettcher, S.; Milton, K.A.

1992-01-01

A recently proposed technique known as the δ expansion provides a nonperturbative treatment of a quantum field theory. The δ-expansion approach can be applied to electrodynamics in such a way that local gauge invariance is preserved. In this paper it is shown that for electrodynamic processes involving only external photon lines and no external electron lines the δ expansion is equivalent to a fermion loop expansion. That is, the coefficient of δ n in the δ expansion is precisely the sum of all n-electron-loop Feynman diagrams in a conventional weak-coupling approximation. This equivalence does not extend to processes having external electron lines. When external electron lines are present, the δ expansion is truly nonperturbative and does not have a simple interpretation as a resummation of conventional Feynman diagrams. To illustrate the nonperturbative character of the δ expansion we perform a speculative calculation of the fermion condensate in the massive Schwinger model in the limit of large coupling constant

Feedback in Clinical Education, Part II: Approved Clinical Instructor and Student Perceptions of and Influences on Feedback

Science.gov (United States)

Nottingham, Sara; Henning, Jolene

2014-01-01

Context: Approved Clinical Instructors (ACIs; now known as preceptors) are expected to provide feedback to athletic training students (ATSs) during clinical education experiences. Researchers in other fields have found that clinical instructors and students often have different perceptions of actual and ideal feedback and that several factors may influence the feedback exchanges between instructors and students. However, understanding of these issues in athletic training education is minimal. Objective: To investigate the current characteristics and perceptions of and the influences on feedback exchanges between ATSs and ACIs. Design: Qualitative study. Setting: One entry-level master's degree program accredited by the Commission on Accreditation of Athletic Training Education. Patients or Other Participants: Four ACIs and 4 second-year ATSs. Data Collection and Analysis: Individual, semistructured interviews were conducted with participants and integrated with field notes and observations for analysis. We used the constant comparative approach to inductively analyze data and develop codes and categories. Member checking, triangulation, and peer debriefing were used to promote trustworthiness of the study. Results: Participants described that feedback plays an important role in clinical education and has several purposes related to improving performance. The ACIs and ATSs also discussed several preferred characteristics of feedback. Participants identified 4 main influences on their feedback exchanges, including the ACI, the ATS, personalities, and the learning environment. Conclusions: The ACIs and ATSs had similar perceptions of ideal feedback in addition to the actual feedback that was provided during their clinical education experiences. Most of the preferences for feedback were aligned with recommendations in the literature, suggesting that existing research findings are applicable to athletic training clinical education. Several factors influenced the

Investigation of internal feedback in hearing aids

DEFF Research Database (Denmark)

Friis, Lars

2009-01-01

with vibroacoustic transmission from the receiver to the microphones often occur during the use of hearing aids. This transmission causes feedback at certain critical gain levels where it produces a loud uncomfortable squealing. Consequently feedback often constitutes the limiting factor for the maximum obtainable...... gain in the hearing aid and it therefore represents a critical design problem. Feedback in hearing aids is usually divided into external and internal feedback. External feedback is caused by the leakage of sound from the ear canal whereas internal feedback is due to transmission of sound and vibrations...... internally in the hearing aid. As a result of reducing the size of hearing aids, manufacturers have experienced an increase in internal feedback problems. The main objective of the present thesis is therefore to examine the vibroacoustic mechanisms responsible for internal feedback in hearing aids...

Numerical solution for identification of feedback coefficients in nuclear reactors

International Nuclear Information System (INIS)

Ebizuka, Yoshie; Sakai, Hideo

1975-01-01

Quasilinearization technique was studied to determine the Kinetic parameters of nuclear reactors. The method of solution was generalized to the determination of the parameters contained in a nonlinear system with nonlinear boundary conditions. A computer program, SNR-3, was developed to solve the resulting nonlinear two-point boundary value equations with generalized boundary conditions. In this paper, the problem formulation and the method of solution are explained for a general type of time dependent problem. A flow chart shows the procedure of numerical solution. The method was then applied to the determination of the critical factor and the reactivity feedback coefficients of reactors to investigate the accuracy and the applicability of the present method. The results showed that the present method was considerably successful, but that the random observation error effected the results of the identification. (Aoki, K.)

Modeling for Stellar Feedback in Galaxy Formation Simulations

Science.gov (United States)

Núñez, Alejandro; Ostriker, Jeremiah P.; Naab, Thorsten; Oser, Ludwig; Hu, Chia-Yu; Choi, Ena

2017-02-01

Various heuristic approaches to model unresolved supernova (SN) feedback in galaxy formation simulations exist to reproduce the formation of spiral galaxies and the overall inefficient conversion of gas into stars. Some models, however, require resolution-dependent scalings. We present a subresolution model representing the three major phases of supernova blast wave evolution—free expansion, energy-conserving Sedov-Taylor, and momentum-conserving snowplow—with energy scalings adopted from high-resolution interstellar-medium simulations in both uniform and multiphase media. We allow for the effects of significantly enhanced SN remnant propagation in a multiphase medium with the cooling radius scaling with the hot volume fraction, {f}{hot}, as {(1-{f}{hot})}-4/5. We also include winds from young massive stars and AGB stars, Strömgren sphere gas heating by massive stars, and a mechanism that limits gas cooling that is driven by radiative recombination of dense H II regions. We present initial tests for isolated Milky Way-like systems simulated with the Gadget-based code SPHgal with improved SPH prescription. Compared to pure thermal SN input, the model significantly suppresses star formation at early epochs, with star formation extended both in time and space in better accord with observations. Compared to models with pure thermal SN feedback, the age at which half the stellar mass is assembled increases by a factor of 2.4, and the mass-loading parameter and gas outflow rate from the galactic disk increase by a factor of 2. Simulation results are converged for a variation of two orders of magnitude in particle mass in the range (1.3-130) × 104 solar masses.

Feedback Blunting: Total Sleep Deprivation Impairs Decision Making that Requires Updating Based on Feedback

Science.gov (United States)

Whitney, Paul; Hinson, John M.; Jackson, Melinda L.; Van Dongen, Hans P.A.

2015-01-01

Study Objectives: To better understand the sometimes catastrophic effects of sleep loss on naturalistic decision making, we investigated effects of sleep deprivation on decision making in a reversal learning paradigm requiring acquisition and updating of information based on outcome feedback. Design: Subjects were randomized to a sleep deprivation or control condition, with performance testing at baseline, after 2 nights of total sleep deprivation (or rested control), and following 2 nights of recovery sleep. Subjects performed a decision task involving initial learning of go and no go response sets followed by unannounced reversal of contingencies, requiring use of outcome feedback for decisions. A working memory scanning task and psychomotor vigilance test were also administered. Setting: Six consecutive days and nights in a controlled laboratory environment with continuous behavioral monitoring. Subjects: Twenty-six subjects (22–40 y of age; 10 women). Interventions: Thirteen subjects were randomized to a 62-h total sleep deprivation condition; the others were controls. Results: Unlike controls, sleep deprived subjects had difficulty with initial learning of go and no go stimuli sets and had profound impairment adapting to reversal. Skin conductance responses to outcome feedback were diminished, indicating blunted affective reactions to feedback accompanying sleep deprivation. Working memory scanning performance was not significantly affected by sleep deprivation. And although sleep deprived subjects showed expected attentional lapses, these could not account for impairments in reversal learning decision making. Conclusions: Sleep deprivation is particularly problematic for decision making involving uncertainty and unexpected change. Blunted reactions to feedback while sleep deprived underlie failures to adapt to uncertainty and changing contingencies. Thus, an error may register, but with diminished effect because of reduced affective valence of the feedback

Multisource feedback to graduate nurses: a multimethod study.

Science.gov (United States)

McPhee, Samantha; Phillips, Nicole M; Ockerby, Cherene; Hutchinson, Alison M

2017-11-01

(1) To explore graduate nurses' perceptions of the influence of multisource feedback on their performance and (2) to explore perceptions of Clinical Nurse Educators involved in providing feedback regarding feasibility and benefit of the approach. Graduate registered nurses are expected to provide high-quality care for patients in demanding and unpredictable clinical environments. Receiving feedback is essential to their development. Performance appraisals are a common method used to provide feedback and typically involve a single source of feedback. Alternatively, multisource feedback allows the learner to gain insight into performance from a variety of perspectives. This study explores multisource feedback in an Australian setting within the graduate nurse context. Multimethod study. Eleven graduates were given structured performance feedback from four raters: Nurse Unit Manager, Clinical Nurse Educator, preceptor and a self-appraisal. Thirteen graduates received standard single-rater appraisals. Data regarding perceptions of feedback for both groups were obtained using a questionnaire. Semistructured interviews were conducted with nurses who received multisource feedback and the educators. In total, 94% (n = 15) of survey respondents perceived feedback was important during the graduate year. Four themes emerged from interviews: informal feedback, appropriateness of raters, elements of delivery and creating an appraisal process that is 'more real'. Multisource feedback was perceived as more beneficial compared to single-rater feedback. Educators saw value in multisource feedback; however, perceived barriers were engaging raters and collating feedback. Some evidence exists to indicate that feedback from multiple sources is valued by graduates. Further research in a larger sample and with more experienced nurses is required. Evidence resulting from this study indicates that multisource feedback is valued by both graduates and educators and informs graduates

Analysis of Feedback in after Action Reviews

Science.gov (United States)

1987-06-01

CONNTSM Page INTRODUCTIUN . . . . . . . . . . . . . . . . . . . A Perspective on Feedback. . ....... • • ..... • 1 Overviev of %,•urrent Research...part of their training program . The AAR is in marked contrast to the critique method of feedback which is often used in military training. The AAR...feedback is task-inherent feedback. Task-inherent feedback refers to human-machine interacting systems, e.g., computers , where in a visual tracking task

Biogeomorphic feedbacks in the Southwestern USA: exploring the mechanisms of geomorphic change and the effectiveness of mitigation measures

Science.gov (United States)

Dean, D. J.; Diehl, R. M.; Topping, D. J.

2017-12-01

Water development and the proliferation of riparian plants have resulted in extensive geomorphic change to rivers worldwide. In many dryland rivers of the Southwestern U.S., these phenomena have contributed to conditions of sediment accumulation leading to channel narrowing, floodplain aggradation, and loss of fluvial habitat. Using a series of field and laboratory measurements, we demonstrate how biogeomorphic feedbacks have promoted channel contraction. Experimental evidence shows that vegetation can have a substantial effect on local hydraulics and sediment-transport fields, depending on plant morphology, but that the impact of plants on physical processes is mediated by flow and sediment supply. In the Little Colorado River in Arizona, water management practices, variations in climate/hydrology, and the resultant expansion of riparian vegetation have resulted in channel narrowing, increases in sinuosity and drag, and decreases in channel slope. These changes have created a biogeomorphic feedback by disrupting downstream flood conveyance; flood travel time has increased resulting in flow attenuation, declines in peak discharge, and continued sediment accumulation at large scales. In the Rio Grande in Big Bend National Park, channel narrowing and floodplain aggradation has led to the loss of channel capacity and an increase in overbank flooding even though discharges have declined. Vegetation expansion into channel environments has exacerbated this condition by reducing channel-margin flow velocities, increasing sediment deposition, and reducing bank erosion thereby creating a biogeomorphic feedback leading to additional narrowing. An understanding of the mechanisms that have driven geomorphic changes in river channels may help to formulate effective mitigation measures. Vegetation removal can have local and reach-scale effects on channel morphology; however, the effectiveness of these actions is dependent upon many variables including the flow regime and

Process stabilization by peak current regulation in reactive high-power impulse magnetron sputtering of hafnium nitride

International Nuclear Information System (INIS)

Shimizu, T; Villamayor, M; Helmersson, U; Lundin, D

2016-01-01

A simple and cost effective approach to stabilize the sputtering process in the transition zone during reactive high-power impulse magnetron sputtering (HiPIMS) is proposed. The method is based on real-time monitoring and control of the discharge current waveforms. To stabilize the process conditions at a given set point, a feedback control system was implemented that automatically regulates the pulse frequency, and thereby the average sputtering power, to maintain a constant maximum discharge current. In the present study, the variation of the pulse current waveforms over a wide range of reactive gas flows and pulse frequencies during a reactive HiPIMS process of Hf-N in an Ar–N 2 atmosphere illustrates that the discharge current waveform is a an excellent indicator of the process conditions. Activating the reactive HiPIMS peak current regulation, stable process conditions were maintained when varying the N 2 flow from 2.1 to 3.5 sccm by an automatic adjustment of the pulse frequency from 600 Hz to 1150 Hz and consequently an increase of the average power from 110 to 270 W. Hf–N films deposited using peak current regulation exhibited a stable stoichiometry, a nearly constant power-normalized deposition rate, and a polycrystalline cubic phase Hf-N with (1 1 1)-preferred orientation over the entire reactive gas flow range investigated. The physical reasons for the change in the current pulse waveform for different process conditions are discussed in some detail. (paper)

Adaptive feedback synchronization of Lue system

International Nuclear Information System (INIS)

Han, X.; Lu, J.-A.; Wu, X.

2004-01-01

This letter further improves and extends the works of Chen and Lue [Chaos, Solitons and Fractals 14 (2002) 643] and Wang et al. [Phys. Lett. A 312 (2003) 34]. In detail, the linear feedback synchronization and adaptive feedback synchronization for Lue system are discussed. And the lower bound of the feedback gain in linear feedback synchronization is presented. The adaptive feedback synchronization with only one controller is designed, which improves the proof in the work by Wang et al. The adaptive synchronization with two controllers for completely uncertain Lue system is also discussed, which extends the work of Chen and Lue. Also, numerical simulations show the effectiveness of these methods

Analytical and numerical comparisons of the α parameter obtained from several expressions versus reactivity

International Nuclear Information System (INIS)

Minguez, E.

1983-01-01

A review of the analytical expressions between α-parameter and reactivity (rho) has been done in this article. Finally, several lineal approximations have been obtained for two important points of values. The analytical expansion has been made using only one family of precursors from delayed neutrons; diffusion equation in one energy groups; neutron flux separability with known spatial function. Numerical results have been obtained using typical data from fast and thermal reactors; considering and homogeneous media of Pu 239 in the first case, and U-235 in the second one. (author)

Feedback control systems for non-linear simulation of operational transients in LMFBRs

International Nuclear Information System (INIS)

Khatib-Rahbar, M.; Agrawal, A.K.; Srinivasan, E.S.

1979-01-01

Feedback control systems for non-linear simulation of operational transients in LMFBRs are developed. The models include (1) the reactor power control and rod drive mechanism, (2) sodium flow control and pump drive system, (3) steam generator flow control and valve actuator dynamics, and (4) the supervisory control. These models have been incorporated into the SSC code using a flexible approach, in order to accommodate some design dependent variations. The impact of system nonlinearity on the control dynamics is shown to be significant for severe perturbations. Representative result for a 10 cent and 25 cent step insertion of reactivity and a 10% ramp change in load in 40 seconds demonstrate the suitability of this model for study of operational transients without scram in LMFBRs

Digital reactivity meter

International Nuclear Information System (INIS)

Akkus, B.; Anac, H.; Alsan, S.; Erk, S.

1991-01-01

Nowadays, various digital methods making use of microcomputers for neutron detector signals and determining the reactivity by numerical calculations are used in reactor control systems in place of classical reactivity meters. In this work, a calculation based on the ''The Time Dependent Transport Equation'' has been developed for determining the reactivity numerically. The reactivity values have been obtained utilizing a computer-based data acquisition and control system and compared with the analog reactivity meter values as well as the values calculated from the ''Inhour Equation''

'Peer feedback' voor huisartsopleiders

NARCIS (Netherlands)

Damoiseaux, R A M J; Truijens, L

2016-01-01

In medical specialist training programmes it is common practice for residents to provide feedback to their medical trainers. The problem is that due to its anonymous nature, the feedback often lacks the specificity necessary to improve the performance of trainers. If anonymity is to be abolished,

Feedback og interpersonel kommunikation

DEFF Research Database (Denmark)

Dindler, Camilla

2016-01-01

Som interpersonel kommunikationsform handler feedback om at observere, mærke og italesætte det, som handler om relationen mellem samtaleparterne mere end om samtaleemnet. Her er fokus på, hvad der siges og hvordan der kommunikeres sammen. Feedback er her ikke en korrigerende tilbagemelding til...

Accelerating the loop expansion

International Nuclear Information System (INIS)

Ingermanson, R.

1986-01-01

This thesis introduces a new non-perturbative technique into quantum field theory. To illustrate the method, I analyze the much-studied phi 4 theory in two dimensions. As a prelude, I first show that the Hartree approximation is easy to obtain from the calculation of the one-loop effective potential by a simple modification of the propagator that does not affect the perturbative renormalization procedure. A further modification then susggests itself, which has the same nice property, and which automatically yields a convex effective potential. I then show that both of these modifications extend naturally to higher orders in the derivative expansion of the effective action and to higher orders in the loop-expansion. The net effect is to re-sum the perturbation series for the effective action as a systematic ''accelerated'' non-perturbative expansion. Each term in the accelerated expansion corresponds to an infinite number of terms in the original series. Each term can be computed explicitly, albeit numerically. Many numerical graphs of the various approximations to the first two terms in the derivative expansion are given. I discuss the reliability of the results and the problem of spontaneous symmetry-breaking, as well as some potential applications to more interesting field theories. 40 refs

Thermal expansion data

International Nuclear Information System (INIS)

Taylor, D.

1984-01-01

This paper gives regression data for a modified second order polynomial fitted to the expansion data of, and percentage expansions for dioxides with (a) the fluorite and antifluorite structure: AmO 2 , BkO 2 , CeO 2 , CmO 2 , HfO 2 , Li 2 O, NpO 2 , PrO 2 , PuO 2 , ThO 2 , UO 2 , ZrO 2 , and (b) the rutile structure: CrO 2 , GeO 2 , IrO 2 , MnO 2 , NbO 2 , PbO 2 , SiO 2 , SnO 2 , TeO 2 , TiO 2 and VO 2 . Reduced expansion curves for the dioxides showed only partial grouping into iso-electronic series for the fluorite structures and showed that the 'law of corresponding states' did not apply to the rutile structures. (author)

Feedback in analog circuits

CERN Document Server

Ochoa, Agustin

2016-01-01

This book describes a consistent and direct methodology to the analysis and design of analog circuits with particular application to circuits containing feedback. The analysis and design of circuits containing feedback is generally presented by either following a series of examples where each circuit is simplified through the use of insight or experience (someone else’s), or a complete nodal-matrix analysis generating lots of algebra. Neither of these approaches leads to gaining insight into the design process easily. The author develops a systematic approach to circuit analysis, the Driving Point Impedance and Signal Flow Graphs (DPI/SFG) method that does not require a-priori insight to the circuit being considered and results in factored analysis supporting the design function. This approach enables designers to account fully for loading and the bi-directional nature of elements both in the feedback path and in the amplifier itself, properties many times assumed negligible and ignored. Feedback circuits a...

Thermal expansion of beryllium oxide

International Nuclear Information System (INIS)

Solodukhin, A.V.; Kruzhalov, A.V.; Mazurenko, V.G.; Maslov, V.A.; Medvedev, V.A.; Polupanova, T.I.

1987-01-01

Precise measurements of temperature dependence of the coefficient of linear expansion in the 22-320 K temperature range on beryllium oxide monocrystals are conducted. A model of thermal expansion is suggested; the range of temperature dependence minimum of the coefficient of thermal expansion is well described within the frames of this model. The results of the experiment may be used for investigation of thermal stresses in crystals

Peer Feedback in Learning a Foreign Language in Facebook

NARCIS (Netherlands)

Akbari, E.; Simons, P.R.J.; Pilot, A.; Naderi, Ahmad

2017-01-01

Feedback can have different forms and functions depending on its objectives as well as its provider: teacher feedback, student feedback, peer feedback, written feedback, oral feedback, etc. One of the most constructive forms of feedback may be peer feedback, since it involves group learning (Van

Behavior of ro-vibrationally excited H2 molecules and H atoms in a plasma expansion

International Nuclear Information System (INIS)

Vankan, P.; Schram, D.C.; Engeln, R.

2005-01-01

The behavior in a supersonic plasma expansion of H atom and H2 molecules, both ground-state and ro-vibrationally excited, is studied using various laser spectroscopic techniques. The ground-state H2 molecules expand like a normal gas. The behavior of H atoms and H 2 rv molecules, on the other hand, is considerably influenced, and to some extend even determined, by their reactivity. The H atoms diffuse out of the expansion due to surface association at the walls of the vacuum vessel. Moreover, by reducing the surface area of the nozzle by a factor of two, the amount of H atoms leaving the source is increased by one order of magnitude, due to a decreased surface association of H atoms in the nozzle. The evolution of the ro-vibrational distributions along the expansion axis shows the relaxation of the molecular hydrogen from the high temperature in the up-stream region to the low ambient temperature in the down-stream region. Whereas the vibrational distribution resembles a Boltzmann distribution, the rotational distribution is a non-equilibrium one, in which the high rotational levels (J > 7) are much more populated than what is expected from the low rotational levels (J <5). We observed overpopulations of up to seven orders of magnitude. The production of the high rotational levels is very probably connected to the surface association in the nozzle

Feedback providing improvement strategies and reflection on feedback use: Effects on students' writing motivation, process, and performance

NARCIS (Netherlands)

Duijnhouwer, H.; Prins, F.J.; Stokking, K.M.

2012-01-01

This study investigated the effects of feedback providing improvement strategies and a reflection assignment on students’ writing motivation, process, and performance. Students in the experimental feedback condition (n = 41) received feedback including improvement strategies, whereas students in the

Linear feedback control, adaptive feedback control and their combination for chaos (lag) synchronization of LC chaotic systems

International Nuclear Information System (INIS)

Yan Zhenya; Yu Pei

2007-01-01

In this paper, we study chaos (lag) synchronization of a new LC chaotic system, which can exhibit not only a two-scroll attractor but also two double-scroll attractors for different parameter values, via three types of state feedback controls: (i) linear feedback control; (ii) adaptive feedback control; and (iii) a combination of linear feedback and adaptive feedback controls. As a consequence, ten families of new feedback control laws are designed to obtain global chaos lag synchronization for τ < 0 and global chaos synchronization for τ = 0 of the LC system. Numerical simulations are used to illustrate these theoretical results. Each family of these obtained feedback control laws, including two linear (adaptive) functions or one linear function and one adaptive function, is added to two equations of the LC system. This is simpler than the known synchronization controllers, which apply controllers to all equations of the LC system. Moreover, based on the obtained results of the LC system, we also derive the control laws for chaos (lag) synchronization of another new type of chaotic system

Feedback loop compensates for rectifier nonlinearity

Science.gov (United States)

1966-01-01

Signal processing circuit with two negative feedback loops rectifies two sinusoidal signals which are 180 degrees out of phase and produces a single full-wave rectified output signal. Each feedback loop incorporates a feedback rectifier to compensate for the nonlinearity of the circuit.

Force feedback and basic laparoscopic skills

NARCIS (Netherlands)

Chmarra, M.K.; Dankelman, J.; Van den Dobbelsteen, J.J.; Jansen, F.W.

2008-01-01

Background - Not much is known about the exact role offorce feedback in laparoscopy. This study aimed to determine whether force feedback influences movements of instruments during training in laparoscopic tasks and whether force feedback is required for training in basic laparoscopic force

Convergence of mayer expansions

International Nuclear Information System (INIS)

Brydges, D.C.

1986-01-01

The tree graph bound of Battle and Federbush is extended and used to provide a simple criterion for the convergence of (iterated) Mayer expansions. As an application estimates on the radius of convergence of the Mayer expansion for the two-dimensional Yukawa gas (nonstable interaction) are obtained

Buckling feedback of the spectral calculations

International Nuclear Information System (INIS)

Jing Xingqing; Shan Wenzhi; Luo Jingyu

1992-01-01

This paper studies the problems about buckling feedback of spectral calculations in physical calculations of the reactor and presents a useful method by which the buckling feedback of spectral calculations is implemented. The effect of the buckling feedback in spectra and the broad group cross section, convergence of buckling feedback iteration and the effect of the spectral zones dividing are discussed in the calculations. This method has been used for the physical design of HTR-10 MW Test Module

Perceiving haptic feedback in virtual reality simulators.

Science.gov (United States)

Våpenstad, Cecilie; Hofstad, Erlend Fagertun; Langø, Thomas; Mårvik, Ronald; Chmarra, Magdalena Karolina

2013-07-01

To improve patient safety, training of psychomotor laparoscopic skills is often done on virtual reality (VR) simulators outside the operating room. Haptic sensations have been found to influence psychomotor performance in laparoscopy. The emulation of haptic feedback is thus an important aspect of VR simulation. Some VR simulators try to simulate these sensations with handles equipped with haptic feedback. We conducted a survey on how laparoscopic surgeons perceive handles with and without haptic feedback. Surgeons with different levels of experience in laparoscopy were asked to test two handles: Xitact IHP with haptic feedback and Xitact ITP without haptic feedback (Mentice AB, Gothenburg, Sweden), connected to the LapSim (Surgical Science AB, Sweden) VR simulator. They performed two tasks on the simulator before answering 12 questions regarding the two handles. The surgeons were not informed about the differences in the handles. A total of 85 % of the 20 surgeons who participated in the survey claimed that it is important that handles with haptic feedback feel realistic. Ninety percent of the surgeons preferred the handles without haptic feedback. The friction in the handles with haptic feedback was perceived to be as in reality (5 %) or too high (95 %). Regarding the handles without haptic feedback, the friction was perceived as in reality (45 %), too low (50 %), or too high (5 %). A total of 85 % of the surgeons thought that the handle with haptic feedback attempts to simulate the resistance offered by tissue to deformation. Ten percent thought that the handle succeeds in doing so. The surveyed surgeons believe that haptic feedback is an important feature on VR simulators; however, they preferred the handles without haptic feedback because they perceived the handles with haptic feedback to add additional friction, making them unrealistic and not mechanically transparent.

Carbon–climate feedbacks accelerate ocean acidification

Directory of Open Access Journals (Sweden)

R. J. Matear

2018-03-01

Full Text Available Carbon–climate feedbacks have the potential to significantly impact the future climate by altering atmospheric CO2 concentrations (Zaehle et al. 2010. By modifying the future atmospheric CO2 concentrations, the carbon–climate feedbacks will also influence the future ocean acidification trajectory. Here, we use the CO2 emissions scenarios from four representative concentration pathways (RCPs with an Earth system model to project the future trajectories of ocean acidification with the inclusion of carbon–climate feedbacks. We show that simulated carbon–climate feedbacks can significantly impact the onset of undersaturated aragonite conditions in the Southern and Arctic oceans, the suitable habitat for tropical coral and the deepwater saturation states. Under the high-emissions scenarios (RCP8.5 and RCP6, the carbon–climate feedbacks advance the onset of surface water under saturation and the decline in suitable coral reef habitat by a decade or more. The impacts of the carbon–climate feedbacks are most significant for the medium- (RCP4.5 and low-emissions (RCP2.6 scenarios. For the RCP4.5 scenario, by 2100 the carbon–climate feedbacks nearly double the area of surface water undersaturated with respect to aragonite and reduce by 50 % the surface water suitable for coral reefs. For the RCP2.6 scenario, by 2100 the carbon–climate feedbacks reduce the area suitable for coral reefs by 40 % and increase the area of undersaturated surface water by 20 %. The sensitivity of ocean acidification to the carbon–climate feedbacks in the low to medium emission scenarios is important because recent CO2 emission reduction commitments are trying to transition emissions to such a scenario. Our study highlights the need to better characterise the carbon–climate feedbacks and ensure we do not underestimate the projected ocean acidification.

Carbon-climate feedbacks accelerate ocean acidification

Science.gov (United States)

Matear, Richard J.; Lenton, Andrew

2018-03-01

Carbon-climate feedbacks have the potential to significantly impact the future climate by altering atmospheric CO2 concentrations (Zaehle et al. 2010). By modifying the future atmospheric CO2 concentrations, the carbon-climate feedbacks will also influence the future ocean acidification trajectory. Here, we use the CO2 emissions scenarios from four representative concentration pathways (RCPs) with an Earth system model to project the future trajectories of ocean acidification with the inclusion of carbon-climate feedbacks. We show that simulated carbon-climate feedbacks can significantly impact the onset of undersaturated aragonite conditions in the Southern and Arctic oceans, the suitable habitat for tropical coral and the deepwater saturation states. Under the high-emissions scenarios (RCP8.5 and RCP6), the carbon-climate feedbacks advance the onset of surface water under saturation and the decline in suitable coral reef habitat by a decade or more. The impacts of the carbon-climate feedbacks are most significant for the medium- (RCP4.5) and low-emissions (RCP2.6) scenarios. For the RCP4.5 scenario, by 2100 the carbon-climate feedbacks nearly double the area of surface water undersaturated with respect to aragonite and reduce by 50 % the surface water suitable for coral reefs. For the RCP2.6 scenario, by 2100 the carbon-climate feedbacks reduce the area suitable for coral reefs by 40 % and increase the area of undersaturated surface water by 20 %. The sensitivity of ocean acidification to the carbon-climate feedbacks in the low to medium emission scenarios is important because recent CO2 emission reduction commitments are trying to transition emissions to such a scenario. Our study highlights the need to better characterise the carbon-climate feedbacks and ensure we do not underestimate the projected ocean acidification.

Instructor feedback versus no instructor feedback on performance in a laparoscopic virtual reality simulator

DEFF Research Database (Denmark)