WorldWideScience

Sample records for expanded materials

  1. Expanding the vision of sensor materials

    National Research Council Canada - National Science Library

    National Research Council Staff

    1995-01-01

    ... NATIONAL MATERIALS ADVISORY BOARD COMMISSION ON ENGINEERING AND TECHNICAL SYSTEMS NATIONAL RESEARCH COUNCIL NATIONAL ACADEMY PRESS Washington, D.C. 1995 i Copyrighttrue Please breaks inserted. are Page files. accidentally typesetting been have may original from the errors not typographic original retained, and from the created cannot be files XML from...

  2. Insulation materials. Cellulose fiber and Expanded polystyrene Insulations

    OpenAIRE

    Viladot Bel, Cèlia

    2017-01-01

    The main role of thermal insulation materials in a building envelope are to prevent heat loss and provide thermal comfort for a building's interior. The factor that characterizes an insulation material's effectiveness is its thermal conductivity λ (measured in W/mK). The lower a material's thermal conductivity, the more effective it is as an insulator. Traditional insulation materials include glass fibre, stone wool, expanded polystyrene, and polyurethane foam. While these materials are effic...

  3. Insulation materials. Cellulose fiber and expanded polystyrene insulations

    OpenAIRE

    Viladot Bel, Cèlia

    2017-01-01

    The main role of thermal insulation materials in a building envelope are to prevent heat loss and provide thermal comfort for a building's interior. The factor that characterizes an insulation material's effectiveness is its thermal conductivity λ (measured in W/mK). The lower a material's thermal conductivity, the more effective it is as an insulator. Traditional insulation materials include glass fibre, stone wool, expanded polystyrene, and polyurethane foam. While these materials are effic...

  4. DEMONSTRATION OF PACKAGING MATERIALS ALTERNATIVES TO EXPANDED POLYSTYRENE

    Science.gov (United States)

    This report represents the second demonstration of cleaner technologies to support the goals of the 33/50 Program under the EPA Cooperative Agreement No. CR-821848. The report presents assessment results of alternative packaging materials which could potentially replace expanded...

  5. Use and application of MADYMO 5.3 foam material model for expanded polypropylene foam

    NARCIS (Netherlands)

    Kant, A.R.; Suffis, B.; Lüsebrink, H.

    1998-01-01

    The dynamic material characteristics of expanded polypropylene are discussed. The in-depth studies, carried out by JSP International, in cooperation with TNO, are used to validate the MADYMO foam material model. The dynamic compression of expanded polypropylene follows a highly non-linear

  6. Expanding Application of Perforated Metal Materials in Construction and Architecture

    Science.gov (United States)

    Mironovs, V.; Tatarinov, A.; Gorbacova, S.

    2017-10-01

    Perforated metal materials (PMM) combine a range of properties, including rigidity, strength, lightweight, small thickness, a dosed transparency and decorative attractiveness. All these bring new application effects in construction industry and architecture. Nowadays, PMM are widely used in design of facades and interiors all over the world, becoming more popular in Latvia as well. The paper touches several aspects of PMM applications, including its decoration function, shadowing of sunlight, sound and noise barrier function and the problem of corrosion when exploited outdoors. Possible perfection may include using different coatings, multi-layer design variants and integration with other constructional materials in order to provide better sound absorption, corrosion resistance and functionality.

  7. Materials, Structures and Manufacturing: An Integrated Approach to Develop Expandable Structures

    Science.gov (United States)

    Belvin, W. Keith; Zander, Martin E.; Sleight, Daid W.; Connell, John; Holloway, Nancy; Palmieri, Frank

    2012-01-01

    Membrane dominated space structures are lightweight and package efficiently for launch; however, they must be expanded (deployed) in-orbit to achieve the desired geometry. These expandable structural systems include solar sails, solar power arrays, antennas, and numerous other large aperture devices that are used to collect, reflect and/or transmit electromagnetic radiation. In this work, an integrated approach to development of thin-film damage tolerant membranes is explored using advanced manufacturing. Bio-inspired hierarchical structures were printed on films using additive manufacturing to achieve improved tear resistance and to facilitate membrane deployment. High precision, robust expandable structures can be realized using materials that are both space durable and processable using additive manufacturing. Test results show this initial work produced higher tear resistance than neat film of equivalent mass. Future research and development opportunities for expandable structural systems designed using an integrated approach to structural design, manufacturing, and materials selection are discussed.

  8. Designing strip footing foundations using expanded polystyrene (EPS) as fill material

    DEFF Research Database (Denmark)

    Psarropoulos, Prodromos; Zania, Varvara; Spyrakos, Konstantinos

    2010-01-01

    One of the modern uses of expanded polystyrene (EPS) is in strip footings as fill material. The current study investigates the effect of the geofoam filling in the static and seismic design of the base slab founded on strip footings. For this purpose the finite element method is employed, and three...

  9. Intelligent Flexible Materials for Space Structures: Expandable Habitat Engineering Development Unit

    Science.gov (United States)

    Hinkle, Jon; Sharpe, George; Lin, John; Wiley, Cliff; Timmers, Richard

    2010-01-01

    Expandable habitable elements are an enabling technology for human exploration in space and on planetary surfaces. Large geometries can be deployed from a small launch volume, allowing greater mission capability while reducing mass and improving robustness over traditional rigid shells. This report describes research performed by ILC Dover under the Intelligent Flexible Materials for Space Structures program on the design and manufacture of softgoods for LaRC's Expandable Habitat Engineering Development Unit (EDU). The EDU is a full-scale structural test article of an expandable hybrid habitat, integrating an expandable softgoods center section with two rigid end caps. The design of the bladder, restraint layer and a mock-up Thermal Micrometeoroid Cover is detailed together with the design of the interface hardware used to attach them to the end caps. The integration and design of two windows and a floor are also covered. Analysis was performed to study the effects of the open weave design, and to determine the correct webbing and fabric configuration. Stress analyses were also carried out on the interfaces between the softgoods and the end caps and windows. Testing experimentally determined the strength of the fabric and straps, and component testing was used to proof several critical parts of the design. This program established new manufacturing and design techniques that can be applied to future applications in expandable structures.

  10. Comparison of material properties of lightweight concrete with recycled polyethylene and expanded clay aggregates

    OpenAIRE

    Rumšys, Deividas; Bačinskas, Darius; Spudulis, Edmundas; Meškėnas, Adas

    2017-01-01

    The article discusses the possibility of using high and low density polyethylene waste as aggregate in lightweight concrete with high strength cement mortar. Research is dedicated to experimental investigation and comparison of material properties of concrete made of polyethylene waste and expanded clay aggregates. Hydration kinetics studies of concrete specimens with different aggregates are performed using measurements of ultrasonic pulse velocity. For the experimental investigation high an...

  11. Effect of expanded graphite on the phase change materials of high density polyethylene/wax blends

    Energy Technology Data Exchange (ETDEWEB)

    AlMaadeed, M.A., E-mail: m.alali@qu.edu.qa [Center for Advanced Materials, Qatar University, 2713 Doha (Qatar); Labidi, Sami [Center for Advanced Materials, Qatar University, 2713 Doha (Qatar); Krupa, Igor [QAPCO Polymer Chair, Center for Advanced Materials, Qatar University, P.O. Box 2713, Doha (Qatar); Karkri, Mustapha [Université Paris-Est CERTES, 61 avenue du Général de Gaulle, 94010 Créteil (France)

    2015-01-20

    Highlights: • Expanded graphite (EG) and low melting point (42.3 °C) wax were added to HDPE to form phase change material. • EG was well dispersed in the composites and did not affect the melting or crystallization of the HDPE matrix. • EG increased the thermal stability of the composites by reducing chain mobility and inhibiting degradation. • The addition of a relatively small quantity of EG enhances the heat conduction in the composite. • HDPE/40% RT42 that contained up to 15% EG demonstrated excellent mechanical and thermal properties and can be used as PCM. - Abstract: Phase change materials fabricated from high density polyethylene (HDPE) blended with 40 or 50 wt% commercial wax (melting point of 43.08 °C) and up to 15 wt% expanded graphite (EG) were studied. Techniques including scanning electron microscope (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and an experimental device to measure diffusivity and conductivity (DICO) were used to determine the microstructural, mechanical and thermal properties of the composites. The composites possessed good mechanical properties. Additionally, no leaching was observed during material processing or characterization. Although the Young’s modulus increased with the addition of EG, no significant changes in tensile strength were detected. The maximum Young’s modulus achieved was 650 MPa for the HDPE/40% wax composite with 15 wt% EG. The EG was well dispersed within the composites and did not affect the melting or crystallization of the HDPE matrix. The incorporation of EG increased the thermal stability of the composites by reducing chain mobility and inhibiting degradation. The intensification of thermal conductivity occurred with increasing fractions of EG, which was attributed to the high thermal conductivity of graphite. The maximum quantity of heat stored by latent heat was found for the HDPE/40% wax composite with EG. The addition of a relatively small quantity

  12. Expanded polystyrene as the bearing building material of low energy construction

    Science.gov (United States)

    Mesaros, P.; Spisakova, M.; Kyjakova, L.; Mandicak, T.

    2015-01-01

    Sustainability of buildings is a really important issue for the construction industry. Sustainable buildings are characterized by the lower construction costs for energy consumption and operations, they are environmentally friendly, able to save natural resources and they are comfortable and healthy for their users. The European Union supports this trend through its Strategy 2020, respectively with document Energy Roadmap 2020. The strategy 2020 sets greenhouse gas emissions 20% lower than 1990, 20% of energy from renewable and 20% increase in energy efficiency. It manifests itself in introduction of modern technologies of house building. One potential for the energy saving is construction of low-energy buildings using modern materials. This paper focuses on the analysis of the low-energy buildings made by expanded polystyrene as the bearing building material. The paper analyzes their design and describes the benefits of this modern but unusual type of construction technology for houses. The examples from abroad clearly indicate that this technology has potential in modern architecture. The success and exploration of this technology potential in the conditions of Slovak construction sector is closely related to interest of investors and users of further sustainable houses which are design according the Strategy 2020 conditions.

  13. A systematic analysis of online marketing materials used by providers of expanded carrier screening.

    Science.gov (United States)

    Chokoshvili, Davit; Borry, Pascal; Vears, Danya F

    2017-12-14

    PurposeExpanded carrier screening (ECS) for a large number of recessive disorders is available to prospective parents through commercial providers. This study aimed to analyze the content of marketing materials on ECS providers' websites.MethodsTo identify providers of ECS tests, we undertook a comprehensive online search, reviewed recent academic literature on commercial carrier screening, and consulted with colleagues familiar with the current ECS landscape. The identified websites were archived in April 2017, and inductive content analysis was performed on website text, brochures and educational materials, and video transcripts.ResultsWe identified 18 ECS providers, including 16 commercial genetic testing companies. Providers typically described ECS as an important family planning tool. The content differed in both the tone used to promote ECS and the accuracy and completeness of the test information provided. We found that most providers offered complimentary genetic counseling to their consumers, although this was often optional, limited to the posttest context, and, in some cases, appeared to be available only to test-positive individuals.ConclusionThe quality of ECS providers' websites could be improved by offering more complete and accurate information about ECS and their tests. Providers should also ensure that all carrier couples receive posttest genetic counseling to inform their subsequent reproductive decision making.Genet Med advance online publication, 14 December 2017; doi:10.1038/gim.2017.222.

  14. Progressively expanded neural network for automatic material identification in hyperspectral imagery

    Science.gov (United States)

    Paheding, Sidike

    The science of hyperspectral remote sensing focuses on the exploitation of the spectral signatures of various materials to enhance capabilities including object detection, recognition, and material characterization. Hyperspectral imagery (HSI) has been extensively used for object detection and identification applications since it provides plenty of spectral information to uniquely identify materials by their reflectance spectra. HSI-based object detection algorithms can be generally classified into stochastic and deterministic approaches. Deterministic approaches are comparatively simple to apply since it is usually based on direct spectral similarity such as spectral angles or spectral correlation. In contrast, stochastic algorithms require statistical modeling and estimation for target class and non-target class. Over the decades, many single class object detection methods have been proposed in the literature, however, deterministic multiclass object detection in HSI has not been explored. In this work, we propose a deterministic multiclass object detection scheme, named class-associative spectral fringe-adjusted joint transform correlation. Human brain is capable of simultaneously processing high volumes of multi-modal data received every second of the day. In contrast, a machine sees input data simply as random binary numbers. Although machines are computationally efficient, they are inferior when comes to data abstraction and interpretation. Thus, mimicking the learning strength of human brain has been current trend in artificial intelligence. In this work, we present a biological inspired neural network, named progressively expanded neural network (PEN Net), based on nonlinear transformation of input neurons to a feature space for better pattern differentiation. In PEN Net, discrete fixed excitations are disassembled and scattered in the feature space as a nonlinear line. Each disassembled element on the line corresponds to a pattern with similar features

  15. The Dichotomous Cosmology with a Static Material World and Expanding Luminous World

    Directory of Open Access Journals (Sweden)

    Heymann Y.

    2014-07-01

    Full Text Available The dichotomous cosmology is an alternative to the expanding Universe theory, and consists of a static matter Universe, where cosmological redshifts are explained by a tired-light model with an expanding luminous world. In this model the Hubble constant is also the photon energy decay rate, and the luminous world i s expanding at a constant rate as in de Sitter cosmology for an empty Universe. The present model explains both the luminosity distance versus redshift relationship of supernovae Ia, and ageing of spectra observed with the stretching of supernovae light curves. Furthermore, it is consistent with a radiation energy density factor (1 + z 4 inferred from the Cosmic Microwave Background Radiation.

  16. Corrosion Inhibition of Stress Corrosion Cracking and Localized Corrosion of Turbo-Expander Materials

    Science.gov (United States)

    Bavarian, Behzad; Zhang, Jia; Reiner, Lisa

    Stress corrosion cracking of 7050 aluminum alloy in the turbo expander and steam/gas turbine industry can cause catastrophic failures, especially for turbo machinery systems performing in hostile, corrosive environments. Commercially available inhibitors were investigated for their effectiveness in reducing and controlling the corrosion susceptibility. Inhibitor effectiveness was confirmed with electrochemical corrosion techniques. Polarization resistance increased with concentration of corrosion inhibitor due to film formation and displacement of water molecules. Cyclic polarization behavior for samples in the 1.0% to 10.0% inhibitor concentration showed a shift in the passive film breakdown potential. The substantial increase in the passive range has positive consequences for neutralizing pitting and crevice corrosion cell chemistry. The strain to failure and tensile strength determined from slow strain rate studies for the aluminum alloy showed pronounced improvement resulting from the inhibitors ability to mitigate SCC. Additionally, the fractographic analysis showed a changed morphology with ductile overload as the primary failure mode instead of transgranular or intergranular cracking.

  17. Preparation, characterization and thermal properties of binary nitrate salts/expanded graphite as composite phase change material

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Junbing [School of Materials and Energy, Guangdong University of Technology, 510006 Guangzhou (China); Huang, Jin, E-mail: huangjiner@126.com [School of Materials and Energy, Guangdong University of Technology, 510006 Guangzhou (China); Zhu, Panpan; Wang, Changhong [School of Materials and Energy, Guangdong University of Technology, 510006 Guangzhou (China); Li, Xinxi [School of Materials and Energy, Guangdong University of Technology, 510006 Guangzhou (China); Center for Nanochemistry, Beijing National Laboratory for Molecular Sciences, State Key Laboratory for Structural Chemistry of Unstable and Stable Species, College of Chemistry and Molecular Engineering, Peking University, Beijing (China)

    2014-07-01

    Highlights: • The expanded graphite enhanced thermal conductivity coefficient greatly. • The aqueous solution method adopting ultrasonic was utilized to disperse EG. • The combination of composite was physical without chemical reaction. • The reduction on total latent heat was slight after the adding EG. - Abstract: The binary nitrate salts/expanded graphite (EG) composite phase change material (PCM) were prepared via adding different mass rate of EG to binary nitrate salts consisting of NaNO{sub 3} and KNO{sub 3} (6:4) by aqueous solution method adopting ultrasonic. The morphology and chemical composition of EG and the composite PCM were characterized and investigated by X-ray diffraction (XRD), scan electron microscope (SEM), energy dispersive spectrometer (EDS), transmission electron microscope (TEM), respectively. Laser thermal conductivity instrument and differential scanning calorimeter (DSC) were employed to measure thermo physical properties. Drawing the conclusion from investigation, that EG had enhanced thermal conductivity coefficient which largely increased to 4.884 W/(m K) and reduced total latent heat by mostly 11.0%. The morphology and phase structure results indicated that EG were well dispersed into and physically combined with molten salts. In general, the prepared composite PCM could be a suitable phase change material for thermal energy storage.

  18. Expanding the view into complex material systems: From micro-ARPES to nanoscale HAXPES

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, C.M. [Peter Gruenberg Institute (PGI-6) and JARA-FIT, Research Center Juelich, D-52425 Juelich (Germany); Fakultaet f. Physik and Center for Nanointegration Duisburg-Essen (CENIDE), Universitaet Duisburg-Essen, D-47048 Duisburg (Germany); Wiemann, C.; Patt, M. [Peter Gruenberg Institute (PGI-6) and JARA-FIT, Research Center Juelich, D-52425 Juelich (Germany); Feyer, V. [Peter Gruenberg Institute (PGI-6) and JARA-FIT, Research Center Juelich, D-52425 Juelich (Germany); Sincrotrone Trieste S.C.p.A., S.S. 14, km 163.5 in Area Science Park, 34012 Basovizza, Trieste (Italy); Plucinski, L.; Krug, I.P. [Peter Gruenberg Institute (PGI-6) and JARA-FIT, Research Center Juelich, D-52425 Juelich (Germany); Escher, M.; Weber, N.; Merkel, M. [FOCUS GmbH, D-65510 Huenstetten (Germany); Renault, O. [CEA, LETI, MINATEC Campus, 17 rue des Martyrs, 38054 Grenoble Cedex 9 (France); Barrett, N. [DSM/IRAMIS/SPCSI, CEA-Saclay, F-91191 Gif sur Yvette Cedex (France)

    2012-10-15

    The analysis of chemical and electronic states in complex and nanostructured material systems requires electron spectroscopy to be carried out with nanometer lateral resolution, i.e. nanospectroscopy. This goal can be achieved by combining a parallel imaging photoelectron emission microscope with a bandpass energy filter. In this contribution we describe selected experiments employing a dedicated spectromicroscope - the NanoESCA. This instrument has a particular emphasis on the spectroscopic aspects and enables laterally resolved photoelectron spectroscopy from the VUV up into the hard X-ray regime.

  19. Contribution to the determination of the expanding properties of ceramic raw materials

    Directory of Open Access Journals (Sweden)

    Lehmann, Hans

    1972-06-01

    Full Text Available Not availableLa creciente necesidad de áridos de poco peso ha conducido a la búsqueda de materias primas adecuadas y a métodos de enjuiciamiento de su idoneidad. En este trabajo se describen métodos de investigación y procedimientos de laboratorio que permiten hacer una investigación sistemática del comportamiento a la fusión y expansión de las materias primas cerámicas. Mediciones de acuerdo con estos procedimientos han dado como resultado que, sin modificar la composición material, las medidas de preparación y la técnica de procedimientos solas influyen notoriamente sobre la capacidad de expansión.

  20. Small strain vibration of a continuous, linearized viscoelastic rod of expanded polymer cushion material

    Science.gov (United States)

    Batt, Gregory S.; Gibert, James M.; Daqaq, Mohammed

    2015-08-01

    In this paper, the free and forced vibration response of a linearized, distributed-parameter model of a viscoelastic rod with an applied tip-mass is investigated. A nonlinear model is developed from constitutive relations and is linearized about a static equilibrium position for analysis. A classical Maxwell-Weichert model, represented via a Prony series, is used to model the viscoelastic system. The exact solution to both the free and forced vibration problem is derived and used to study the behavior of an idealized packaging system containing Nova Chemicals' Arcel® foam. It is observed that, although three Prony series terms are deemed sufficient to fit the static test data, convergence of the dynamic response and study of the storage and loss modulii necessitate the use of additional Prony series terms. It is also shown that the model is able to predict the modal frequencies and the primary resonance response at low acceleration excitation, both with reasonable accuracy given the non-homogeneity and density variation observed in the specimens. Higher acceleration inputs result in softening nonlinear responses highlighting the need for a nonlinear elastic model that extends beyond the scope of this work. Solution analysis and experimental data indicate little material vibration energy dissipation close to the first modal frequency of the mass/rod system.

  1. Quasistatic problems for piecewise-continuously growing solids with integral force conditions on surfaces expanding due to additional material influx

    Science.gov (United States)

    Parshin, D. A.; Manzhirov, A. V.

    2017-12-01

    The piecewise continuous processes of additive forming of solids are studied. The being formed solids exhibit properties of deformation heredity and aging. The approaches of linear mechanics of growing solids in the framework of the theory of viscoelasticity of the homogeneously aging isotropic media are applied. Nonclassical boundary-value problems for describing the mentioned processes with the integral satisfaction of force conditions on some expanding due to the influx of additional material parts of the formed solid surface are investigated. A proposition about the commutativity of the time-derived integral operator of viscoelasticity with a limit depending on the solid point with the integration over an arbitrary, expanding due to the growth, surface inside or on the boundary of the growing solid is given. This proposition provides a way to construct the solution of the corresponding growing solids mechanics problem on the basis of Saint-Venant principle. The solution will retrace the evolution of the stress-strain state of the solid under consideration during and after the process of its additive formation. An example of applying the announced technic to modelling the processes of additive forming solids of conical shape under simultaneous action of end loads that are statically equivalent to an axial time-varying force is demonstrated.

  2. Using expanded real options analysis to evaluate capacity expansion decisions under uncertainty in the construction material industry

    Directory of Open Access Journals (Sweden)

    Momani, Amer Mohammad

    2016-08-01

    Full Text Available Capacity expansion generally requires large capital expenditure on illiquid assets. Therefore, decisions to enlarge capacity must support the organisation’s strategic objectives and provide valuable input for the budgeting process. This paper applies an expanded form of Real Options Analysis (ROA to generate and evaluate capacity expansion strategies under uncertainty in the construction material industry. ROA is applied to different expansion strategies associated with different demand scenarios. Evaluating a wider variety of strategies can reduce risk and sponsor decisions that maximise the firm’s value. The case study shows that the execution of a lead expansion strategy with 10-year intervals under a 50 per cent demand satisfaction scenario produces superior results.

  3. Plasma techniques for nanostructured carbon materials synthesis. A case study: carbon nanowall growth by low pressure expanding RF plasma

    Science.gov (United States)

    Vizireanu, S.; Stoica, S. D.; Luculescu, C.; Nistor, L. C.; Mitu, B.; Dinescu, G.

    2010-06-01

    A short description of approaches for carbon nanostructures synthesis is made and the advantages of using plasma during the growth are presented. As a particular example of a plasma based technique we detail the process of downstream carbon nanowall (CNW) synthesis by a radiofrequency expanding plasma beam. The technique combines magnetron sputtering for catalyst deposition and plasma enhanced chemical vapor deposition (main gas: argon, active gas: hydrogen, precursor gas: acetylene) for carbon growth in a single reactor. The analysis focuses on the correlation between the material properties and the plasma characteristics measured at different points along the flow axis, aiming to reveal the importance of plasma species in the growth process. The material properties were investigated by scanning and transmission electron microscopy, whereas the plasma data were obtained by optical emission spectroscopy, Langmuir probes and mass spectrometry. CNWs with a large area and well isolated from each other are obtained at an optimum distance from the precursor injection point where the plasma presents an enhanced content of carbon nanoclusters. The possible processes responsible for the growth are discussed.

  4. Plasma techniques for nanostructured carbon materials synthesis. A case study: carbon nanowall growth by low pressure expanding RF plasma

    Energy Technology Data Exchange (ETDEWEB)

    Vizireanu, S; Stoica, S D; Luculescu, C; Mitu, B; Dinescu, G [National Institute for Laser, Plasma and Radiation Physics Magurele-Bucharest, PO Box MG-16, 077125 (Romania); Nistor, L C, E-mail: dinescug@infim.r [National Institute for Materials Physics Magurele-Bucharest, 077125 (Romania)

    2010-06-15

    A short description of approaches for carbon nanostructures synthesis is made and the advantages of using plasma during the growth are presented. As a particular example of a plasma based technique we detail the process of downstream carbon nanowall (CNW) synthesis by a radiofrequency expanding plasma beam. The technique combines magnetron sputtering for catalyst deposition and plasma enhanced chemical vapor deposition (main gas: argon, active gas: hydrogen, precursor gas: acetylene) for carbon growth in a single reactor. The analysis focuses on the correlation between the material properties and the plasma characteristics measured at different points along the flow axis, aiming to reveal the importance of plasma species in the growth process. The material properties were investigated by scanning and transmission electron microscopy, whereas the plasma data were obtained by optical emission spectroscopy, Langmuir probes and mass spectrometry. CNWs with a large area and well isolated from each other are obtained at an optimum distance from the precursor injection point where the plasma presents an enhanced content of carbon nanoclusters. The possible processes responsible for the growth are discussed.

  5. Evaluation of the Effects of Crushed and Expanded Waste Glass Aggregates on the Material Properties of Lightweight Concrete Using Image-Based Approaches

    Directory of Open Access Journals (Sweden)

    Sang-Yeop Chung

    2017-11-01

    Full Text Available Recently, the recycling of waste glass has become a worldwide issue in the reduction of waste and energy consumption. Waste glass can be utilized in construction materials, and understanding its effects on material properties is crucial in developing advanced materials. In this study, recycled crushed and expanded glasses are used as lightweight aggregates for concrete, and their relation to the material characteristics and properties is investigated using several approaches. Lightweight concrete specimens containing only crushed and expanded waste glass as fine aggregates are produced, and their pore and structural characteristics are examined using image-based methods, such as scanning electron microscopy (SEM, X-ray computed tomography (CT, and automated image analysis (RapidAir. The thermal properties of the materials are measured using both Hot Disk and ISOMET devices to enhance measurement accuracy. Mechanical properties are also evaluated, and the correlation between material characteristics and properties is evaluated. As a control group, a concrete specimen with natural fine sand is prepared, and its characteristics are compared with those of the specimens containing crushed and expanded waste glass aggregates. The obtained results support the usability of crushed and expanded waste glass aggregates as alternative lightweight aggregates.

  6. Evaluation of the Effects of Crushed and Expanded Waste Glass Aggregates on the Material Properties of Lightweight Concrete Using Image-Based Approaches.

    Science.gov (United States)

    Chung, Sang-Yeop; Abd Elrahman, Mohamed; Sikora, Pawel; Rucinska, Teresa; Horszczaruk, Elzbieta; Stephan, Dietmar

    2017-11-25

    Recently, the recycling of waste glass has become a worldwide issue in the reduction of waste and energy consumption. Waste glass can be utilized in construction materials, and understanding its effects on material properties is crucial in developing advanced materials. In this study, recycled crushed and expanded glasses are used as lightweight aggregates for concrete, and their relation to the material characteristics and properties is investigated using several approaches. Lightweight concrete specimens containing only crushed and expanded waste glass as fine aggregates are produced, and their pore and structural characteristics are examined using image-based methods, such as scanning electron microscopy (SEM), X-ray computed tomography (CT), and automated image analysis (RapidAir). The thermal properties of the materials are measured using both Hot Disk and ISOMET devices to enhance measurement accuracy. Mechanical properties are also evaluated, and the correlation between material characteristics and properties is evaluated. As a control group, a concrete specimen with natural fine sand is prepared, and its characteristics are compared with those of the specimens containing crushed and expanded waste glass aggregates. The obtained results support the usability of crushed and expanded waste glass aggregates as alternative lightweight aggregates.

  7. Extruded expanded polystyrene sheets coated by TiO{sub 2} as new photocatalytic materials for foodstuffs packaging

    Energy Technology Data Exchange (ETDEWEB)

    Loddo, V.; Marci, G. [Schiavello-Grillone Photocatalysis Group - Dipartimento di Ingegneria Elettrica, Elettronica e delle Telecomunicazioni, di tecnologie Chimiche, Automatica e modelli Matematici - Universita degli Studi di Palermo, Viale delle Scienze (Ed. 6) - 90128 Palermo (Italy); Palmisano, G., E-mail: giovanni_palmisano@yahoo.it [Schiavello-Grillone Photocatalysis Group - Dipartimento di Ingegneria Elettrica, Elettronica e delle Telecomunicazioni, di tecnologie Chimiche, Automatica e modelli Matematici - Universita degli Studi di Palermo, Viale delle Scienze (Ed. 6) - 90128 Palermo (Italy); Yurdakal, S. [Kimya Boeluemue, Fen-Edebiyat Fakueltesi, Afyon Kocatepe Ueniversitesi - Ahmet Necdet Sezer Kampuesue - 03200 Afyon (Turkey); Brazzoli, M.; Garavaglia, L. [Sirap-Gema S.p.A. - Via Industriale, 1/3 - 25028 Verolanuova (Brescia) (Italy); Palmisano, L., E-mail: leonardo.palmisano@unipa.it [Schiavello-Grillone Photocatalysis Group - Dipartimento di Ingegneria Elettrica, Elettronica e delle Telecomunicazioni, di tecnologie Chimiche, Automatica e modelli Matematici - Universita degli Studi di Palermo, Viale delle Scienze (Ed. 6) - 90128 Palermo (Italy)

    2012-11-15

    Highlights: Black-Right-Pointing-Pointer An extruded polystyrene has been functionalised by TiO{sub 2}. Black-Right-Pointing-Pointer A photocatalytic polymer has been developed via a sol-gel method. Black-Right-Pointing-Pointer Thermoformed packagings for foodstuffs application have been prepared. - Abstract: Nanostructured, photoactive anatase TiO{sub 2} sol prepared under very mild conditions using titanium tetraisopropoxide as the precursor is used to functionalise extruded expanded polystyrene (XPS) sheets by spray-coating resulting in stable and active materials functionalised by TiO{sub 2} nanoparticles. Photocatalytic tests of these sheets performed in a batch reactor in gas-solid system under UV irradiation show their successful activity in degrading probe molecules (2-propanol, trimethylamine and ethene). Raman spectra ensure the deposition of TiO{sub 2} as crystalline anatase phase on the polymer surface. The presence of TiO{sub 2} with respect to polymer surface can be observed in SEM images coupled to EDAX mapping allowing to monitor the surface morphology and the distribution of TiO{sub 2} particles. Finally thermoforming of these sheets in industrial standard equipment leads to useful containers for foodstuffs.

  8. Effects of the support material addition on the hydrodynamic behavior of an anaerobic expanded granular sludge bed reactor.

    Science.gov (United States)

    Pérez-Pérez, Tania; Correia, Gleyce Teixeira; Kwong, Wu Hong; Pereda-Reyes, Ileana; Oliva-Merencio, Deny; Zaiat, Marcelo

    2017-04-01

    As a support material, zeolite can be used to promote the granulation process due to its high settable property and the ability to retain biomass on its surface. The present paper reports on the influence of zeolite addition on the hydrodynamic behavior of an expanded granular sludge bed reactor (EGSB). Different models were applied to fit the flow pattern and to compare EGSB hydrodynamic performance with and without the addition of zeolite. The experimental data fit the tanks in a series model for zeolite bed height of 5cm and upflow velocity of 6m/hr. Higher axial dispersion degree (D/uL) was obtained at lower heights of zeolite. The real hydraulic retention time (HRTr) was increased with both increased zeolite bed height and increased upflow velocity. The short-circuit results for 5cm of zeolite bed and 6, 8 and 10m/hr upflow velocity were 0.3, 0.24 and 0.19 respectively, demonstrating the feasibility of using zeolite for a proper hydrodynamic environment to operate the EGSB reactor. The presence of zeolite resulted in the higher percentage values of dead zones, ranging from 12% to 24%. Zeolite addition exerted a positive effect on the hydrodynamics pattern for this technology being advantageous for the anaerobic process because of its possible contribution to better biofilm agglomeration, granule formation and substrate-microorganism contact. Copyright © 2016. Published by Elsevier B.V.

  9. A novel procedure for introducing large sheet-type surgical material with a self-expanding origami structure using a slim trocar (chevron pleats procedure).

    Science.gov (United States)

    Nakase, Yuen; Nakamura, Kei; Sougawa, Akira; Nagata, Tomoyuki; Mochizuki, Satoshi; Kitai, Shouzo; Inaba, Seishirou

    2016-12-30

    Large sheet-type surgical materials (e.g., absorbable hemostat, adhesion barrier membranes, and flat surgical mesh) are difficult to introduce into a corporeal cavity using a 5-mm trocar; however, laparoscopic surgeries that use mainly 5-mm trocars are increasing. Furthermore, it is necessary not only to introduce but also to secure the applied surgical material and expand it from the original surgical site. To address these challenges, we developed a novel procedure for introducing such surgical materials into a corporeal cavity using a 5-mm trocar and a self-expanding origami structure, called the "chevron pleats procedure (CPP)". We used CPP in 114 cases of laparoscopic surgery for gastrointestinal diseases. The chevron folding pattern is an excellent origami structure and compactly folds a large sheet of material for use with a slim trocar. Surgical materials were folded using a chevron pleats pattern and inserted into a novel, slim, long syringe-type device, which was made from a specially ordered precision polypropylene tube, for introduction into a corporeal cavity. When the surgical material was used, the end of the device was placed above the surgical site and the inner rod was pushed. The surgical material was securely injected and expanded over the surgical site. Surgical materials were introduced smoothly and securely using a 5-mm trocar to a site of intraoperative bleeding, the incisional surface of the liver, and defects of the abdominal wall or peritoneum. Efficient hemostasis was attained, the introduction and expansion of surgical mesh was made simpler, and the covering of defects of the peritoneum with adhesion barrier membranes, which is typically difficult during laparoscopic surgery, was easily performed. CPP is a basic utility procedure for introducing several sheet-type surgical materials into a corporeal cavity with a 5-mm trocar and might help ensure efficient and safe laparoscopic surgery.

  10. Spatial and temporal distributions of hexabromocyclododecanes in the vicinity of an expanded polystyrene material manufacturing plant in Tianjin, China.

    Science.gov (United States)

    Zhu, Hongkai; Zhang, Kai; Sun, Hongwen; Wang, Fei; Yao, Yiming

    2017-03-01

    To investigate the environmental fate of 3 main hexabromocyclododecane diastereoisomers (α-, β-, and γ-HBCDs), samples from various environmental media, including outdoor settled dust, soil, sediment, plant tissues (holly, cypress and pine) and marine species (shrimp, crab and fish) were obtained around an expanded polystyrene material manufacturing plant in Tianjin, China. The 3 main HBCD diastereoisomers were detected with the total concentrations ranging from 328 to 31,752 ng/g dry weight (dw), 2.91-1730 ng/g dw, 23.5-716 ng/g dw, 3.45-2494 ng/g dw, and 0.878-44.8 ng/g dw in the dust, soil, sediment, plant tissues, and marine species, respectively. This indicated that a point source of HBCDs could bring wide impact on its vicinal environment. A significant increasing trend of HBCDs concentrations was noted, as indicated by 12.9-41.6% of increasing rates in total concentrations of HBCDs at four sediment sites in the past five years. The diastereoisomer profiles were sorted into 3 groups: dust, soil and sediment, which had no statistical difference from commercial EPS-products (p > 0.05); plant tissues, which showed a moderate increase of α-isomer (22.9 ± 3.3%); and marine species, which were dominated by α-isomer (62.6 ± 2.8%). For α- and β-isomers, the results of enantiomeric analysis showed a preferential accumulation of the (+)-enantiomer in part of plant tissues and all marine organisms (p  0.05). Besides, marine food web magnification is observed for HBCDs, with trophic magnification factors close to 2. The daily intakes of HBCDs were estimated to be 0.058-5.84 ng/kg-bw/day for local residents through dust and soil ingestion and 0.048-8.43 ng/kg-bw/day for Tianjin citizens through seafood consumption. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. One-pot synthesis of core-expanded naphthalene diimides: enabling N-substituent modulation for diverse n-type organic materials.

    Science.gov (United States)

    Hu, Yunbin; Qin, Yunke; Gao, Xike; Zhang, Fengjiao; Di, Chong-an; Zhao, Zheng; Li, Hongxiang; Zhu, Daoben

    2012-01-06

    A mild and versatile one-pot synthesis of core-expanded naphthalene diimides has been developed, which undergoes a nucleophilic aromatic substitution reaction and then an imidization reaction, allowing an easy and low-cost access to diverse n-type organic materials. Some newly synthesized compounds by this one-pot operation exhibited high electron mobility of up to 0.70 cm(2) V(-1) s(-1) in ambient conditions. © 2011 American Chemical Society

  12. Expanded corn starch as a versatile material in atom transfer radical polymerization (ATRP) of styrene and methyl methacrylate.

    Science.gov (United States)

    Bansal, Ankushi; Kumar, Arvind; Latha, Patnam Padma; Ray, Siddharth Sankar; Chatterjee, Alok Kumar

    2015-10-05

    Polymerization of styrene (St) and methyl methacrylate (MMA) was performed by surface initiated (SI) and activator generated by electron transfer (AGET) systems of atom transfer radical polymerization (ATRP) using renewable expanded corn starch (ECS) as a support. This prepared ECS is found to have V type crystallinity with 50 m(2)g(-1) surface area (<1m(2)g(-1) for corn starch (CS)) and average pore volume of 0.43 cm(3)g(-1) (<0.1cm(3)g(-1) for CS). In SI-ATRP, hydroxyl groups on ECS were converted into macro-initiator by replacing with 2-bromoisobutyryl bromide (BIBB) with a 0.06 degree of substitution determined from NMR. In AGET-ATRP, CuBr2/ligand complex get adsorbed on ECS (Cu(II)/ECS=10 wt.%) to catalyze the polymerization. Synthesized PS/PMMA was characterized by SEM, FT-IR, (1)H NMR. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

    National Research Council Canada - National Science Library

    Yang, Haiyue; Wang, Yazhou; Liu, Zhuangchao; Liang, Daxin; Liu, Feng; Zhang, Wenbo; Di, Xin; Wang, Chengyu; Ho, Shih-Hsin; Chen, Wei-Hsin

    2017-01-01

    .... In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals...

  14. Age Does Not Affect the Material Properties of Expanded Polystyrene Liners in Field-Used Bicycle Helmets.

    Science.gov (United States)

    Kroeker, Shannon G; Bonin, Stephanie J; DeMarco, Alyssa L; Good, Craig A; Siegmund, Gunter P

    2016-04-01

    Bicycle helmet foam liners absorb energy during impacts. Our goal was to determine if the impact attenuation properties of expanded polystyrene (EPS) foam used in bicycle helmets change with age. Foam cores were extracted from 63 used and unused bicycle helmets from ten different models spanning an age range of 2-20 yrs. All cores were impact tested at a bulk strain rate of 195 s(-1). Six dependent variables were determined from the stress-strain curve derived from each impact (yield strain, yield stress, elastic modulus, plateau slope, energy at 65% compression, and stress at 65% compression), and a general linear model was used to assess the effect of age on each dependent variable with density as a covariate. Age did not affect any of the dependent variables; however, greater foam density, which varied from 58 to 100 kg/m(3), generated significant increases in all of the dependent variables except for yield strain. Higher density foam cores also exhibited lower strains at which densification began to occur, tended to stay within the plateau region of the stress-strain curve, and were not compressed as much compared with the lower density cores. Based on these data, the impact attenuation properties of EPS foam in field-used bicycle helmets do not degrade with the age.

  15. Photocatalytic self-cleaning poly(L-lactide) materials based on a hybrid between nanosized zinc oxide and expanded graphite or fullerene.

    Science.gov (United States)

    Virovska, Daniela; Paneva, Dilyana; Manolova, Nevena; Rashkov, Iliya; Karashanova, Daniela

    2016-03-01

    New self-cleaning materials of polymer fibers decorated with a hybrid between nanosized zinc oxide and expanded graphite (EG) or fullerene (C60) were obtained. The new materials were prepared by applying electrospinning in conjunction with electrospraying. Poly(l-lactide) (PLA) was selected as a biocompatible and (bio)degradable polymer carrier. PLA solution was electrospun in combination with electrospraying of a suspension that contained the ZnO/EG or ZnO/C60 hybrid. Mats with different content of EG or C60 were obtained. The new materials were characterized by scanning and transmission electron microscopy (SEM and TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and X-ray diffraction analysis (XRD). The photocatalytic activity of the materials was evaluated by using model dyes. The formation of a hybrid between ZnO and EG led to enhancement of the photocatalytic activity of the mats at ZnO/EG weight ratios of 90/10 and 85/15. Increase in the photocatalytic activity of the ZnO-containing mats was also achieved by the formation of a hybrid between ZnO and C60 at a fullerene content of 0.5 and 1.0 wt.% in respect to ZnO weight. The new materials exhibited antibacterial activity as evidenced by the performed studies against Staphylococcus aureus. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. Photocatalytic self-cleaning poly(L-lactide) materials based on a hybrid between nanosized zinc oxide and expanded graphite or fullerene

    Energy Technology Data Exchange (ETDEWEB)

    Virovska, Daniela [Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 103A, BG-1113 Sofia (Bulgaria); Paneva, Dilyana, E-mail: panevad@polymer.bas.bg [Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 103A, BG-1113 Sofia (Bulgaria); Manolova, Nevena [Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 103A, BG-1113 Sofia (Bulgaria); Rashkov, Iliya, E-mail: rashkov@polymer.bas.bg [Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 103A, BG-1113 Sofia (Bulgaria); Karashanova, Daniela [Institute of Optical Materials and Technologies, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 109, BG-1113 Sofia (Bulgaria)

    2016-03-01

    New self-cleaning materials of polymer fibers decorated with a hybrid between nanosized zinc oxide and expanded graphite (EG) or fullerene (C{sub 60}) were obtained. The new materials were prepared by applying electrospinning in conjunction with electrospraying. Poly(L-lactide) (PLA) was selected as a biocompatible and (bio)degradable polymer carrier. PLA solution was electrospun in combination with electrospraying of a suspension that contained the ZnO/EG or ZnO/C{sub 60} hybrid. Mats with different content of EG or C{sub 60} were obtained. The new materials were characterized by scanning and transmission electron microscopy (SEM and TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and X-ray diffraction analysis (XRD). The photocatalytic activity of the materials was evaluated by using model dyes. The formation of a hybrid between ZnO and EG led to enhancement of the photocatalytic activity of the mats at ZnO/EG weight ratios of 90/10 and 85/15. Increase in the photocatalytic activity of the ZnO-containing mats was also achieved by the formation of a hybrid between ZnO and C{sub 60} at a fullerene content of 0.5 and 1.0 wt.% in respect to ZnO weight. The new materials exhibited antibacterial activity as evidenced by the performed studies against Staphylococcus aureus. - Highlights: • New self-cleaning materials are fabricated by electrospinning/electrospraying. • PLA fibers decorated with nanosized ZnO/EG or ZnO/C{sub 60} hybrid are obtained. • Their photocatalytic activity is enhanced as compared to fibers with bare ZnO. • The new materials can be used repeatedly for degradation of MB and RR dyes. • The new self-cleaning materials exhibit antibacterial activity against S. aureus.

  17. Expanding subjectivities

    DEFF Research Database (Denmark)

    Lundgaard Andersen, Linda; Soldz, Stephen

    2012-01-01

    A major theme in recent psychoanalytic thinking concerns the use of therapist subjectivity, especially “countertransference,” in understanding patients. This thinking converges with and expands developments in qualitative research regarding the use of researcher subjectivity as a tool to understa...

  18. Expander Codes

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 10; Issue 1. Expander Codes - The Sipser–Spielman Construction. Priti Shankar. General Article Volume 10 ... Author Affiliations. Priti Shankar1. Department of Computer Science and Automation, Indian Institute of Science Bangalore 560 012, India.

  19. Expanding the knowledge on dried blood spots and LC-MS-based protein analysis: two different sampling materials and six protein targets.

    Science.gov (United States)

    Rosting, Cecilie; Gjelstad, Astrid; Halvorsen, Trine Grønhaug

    2017-05-01

    The combination of dried blood spots (DBS) and bottom-up LC-MS-based protein analysis was investigated in the present paper using six model proteins (1 mg/mL of each protein) with different physicochemical properties. Two different materials for DBS were examined: a water-soluble DBS material (carboxymethyl cellulose, (CMC)) and a commercially available (non-soluble) material (DMPK-C). The sample preparation was optimised regarding the water-soluble material and achieving acceptable repeatability of the signal was emphasised. Five microlitres of whole blood were deposited and dried on either CMC or DMPK-C. The samples were dissolved (CMC) or extracted (DMPK-C) prior to tryptic digest and matrix precipitation. The optimization of the sample preparation showed that an increased buffer concentration (100 mM ammonium bicarbonate) for dissolving the DBS samples gave better repeatability combined with a decrease in analyte signal. CMC seemed to add extra variability (RSD 8-60%) into the analysis compared to sample prepared without CMC (RSD 6-36%), although equal performance compared to DMPK-C material (RSD 13-60%) was demonstrated. The stability of the analytes was examined for different storage periods (1 and 4 weeks) and different storage temperatures (-25, 25, and 40 °C). The stability on both CMC (> 70% compared to reference) and DMPK-C (> 50% compared to reference) was acceptable for most of the peptides. This paper shows that both DBS materials can be used in targeted LC-MS-based protein analysis of proteins with different physicochemical properties. Graphical Abstract Overview of the experimental set-up for expanding the knowledge of dried blood spots in LC-MS-based protein anaysis.

  20. Partition expanders

    Czech Academy of Sciences Publication Activity Database

    Gavinsky, Dmitry; Pudlák, Pavel

    2017-01-01

    Roč. 60, č. 3 (2017), s. 378-395 ISSN 1432-4350 R&D Projects: GA ČR GBP202/12/G061 Institutional support: RVO:67985840 Keywords : expanders * pseudorandomness * communication complexity Subject RIV: BA - General Mathematics Impact factor: 0.645, year: 2016 http://link.springer.com/article/10.1007%2Fs00224-016-9738-5

  1. Expanding hollow metal rings

    Science.gov (United States)

    Peacock, Harold B [Evans, GA; Imrich, Kenneth J [Grovetown, GA

    2009-03-17

    A sealing device that may expand more planar dimensions due to internal thermal expansion of a filler material. The sealing material is of a composition such that when desired environment temperatures and internal actuating pressures are reached, the sealing materials undergoes a permanent deformation. For metallic compounds, this permanent deformation occurs when the material enters the plastic deformation phase. Polymers, and other materials, may be using a sealing mechanism depending on the temperatures and corrosivity of the use. Internal pressures are generated by either rapid thermal expansion or material phase change and may include either liquid or solid to gas phase change, or in the gaseous state with significant pressure generation in accordance with the gas laws. Sealing material thickness and material composition may be used to selectively control geometric expansion of the seal such that expansion is limited to a specific facing and or geometric plane.

  2. Expanding versus non expanding universe

    CERN Document Server

    Alfonso-Faus, Antonio

    2012-01-01

    In cosmology the number of scientists using the framework of an expanding universe is very high. This model, the big-bang, is now overwhelmingly present in almost all aspects of society. It is the main stream cosmology of today. A small number of scientists are researching on the possibility of a non-expanding universe. The existence of these two groups, one very large and the other very small, is a good proof of the use of the scientific method: it does not drive to an absolute certainty. All models have to be permanently validated, falsified. Ockham's razor, a powerful philosophical tool, will probably change the amount of scientists working in each of these groups. We present here a model where a big-bang is unnecessary. It ends, in a finite time, in a second INFLATION, or a disaggregation to infinity. We also discuss the possibilities of a non-expanding universe model. Only a few references will be cited, mainly concerned with our own work in the past, thus purposely avoiding citing the many thousands of ...

  3. Expanded Dengue.

    Science.gov (United States)

    Kadam, D B; Salvi, Sonali; Chandanwale, Ajay

    2016-07-01

    The World Health Organization (WHO) has coined the term expanded dengue to describe cases which do not fall into either dengue shock syndrome or dengue hemorrhagic fever. This has incorporated several atypical findings of dengue. Dengue virus has not been enlisted as a common etiological agent in several conditions like encephalitis, Guillain Barre syndrome. Moreover it is a great mimic of co-existing epidemics like Malaria, Chikungunya and Zika virus disease, which are also mosquito-borne diseases. The atypical manifestations noted in dengue can be mutisystemic and multifacetal. In clinical practice, the occurrence of atypical presentation should prompt us to investigate for dengue. Knowledge of expanded dengue helps to clinch the diagnosis of dengue early, especially during ongoing epidemics, avoiding further battery of investigations. Dengue has proved to be the epidemic with the ability to recur and has a diverse array of presentation as seen in large series from India, Srilanka, Indonesia and Taiwan. WHO has given the case definition of dengue fever in their comprehensive guidelines. Accordingly, a probable case is defined as acute febrile illness with two or more of any findings viz. headache, retro-orbital pain, myalgia, arthralgia, rash, hemorrhagic manifestations, leucopenia and supportive serology. There have been cases of patients admitted with fever, altered mentation with or without neck stiffness and pyramidal tract signs. Some had seizures or status epilepticus as presentation. When they were tested for serology, dengue was positive. After ruling out other causes, dengue remained the only culprit. We have come across varied presentations of dengue fever in clinical practice and the present article throws light on atypical manifestations of dengue. © Journal of the Association of Physicians of India 2011.

  4. TRIPLE ACTION PALATE EXPANDER

    Directory of Open Access Journals (Sweden)

    Svetlana Yordanova

    2011-09-01

    Full Text Available Malocclusion correction essentially involves expansion of the maxilla, protrusion of anterior teeth and opening the bite. Expansion is often the stage preceding the treatment with fixed appliances. The elevation of the occlusion using accomplished with different devices (bite planes -fixed or removable, composite material on the occlusall surface of molars carries the risk of breaking or debonding them.The present article proposes an expanding appliance with triple action as a therapeutic means of choice in an orthodontic treatment with fixed appliances. The expander can simultaneously be used to protrude upper teeth, to expand the upper jaw and disarticulate the occlusion. It can be easily fabricated in clinical conditions, causes no discomfort and does not hamper oral hygiene because it can be removed and cleaned.

  5. Preparation, Mechanical and Thermal Properties of Cement Board with Expanded Perlite Based Composite Phase Change Material for Improving Buildings Thermal Behavior.

    Science.gov (United States)

    Ye, Rongda; Fang, Xiaoming; Zhang, Zhengguo; Gao, Xuenong

    2015-11-13

    Here we demonstrate the mechanical properties, thermal conductivity, and thermal energy storage performance of construction elements made of cement and form-stable PCM-Rubitherm® RT 28 HC (RT28)/expanded perlite (EP) composite phase change materials (PCMs). The composite PCMs were prepared by adsorbing RT28 into the pores of EP, in which the mass fraction of RT28 should be limited to be no more than 40 wt %. The adsorbed RT28 is observed to be uniformly confined into the pores of EP. The phase change temperatures of the RT28/EP composite PCMs are very close to that of the pure RT28. The apparent density and compression strength of the composite cubes increase linearly with the mass fraction of RT28. Compared with the thermal conductivity of the boards composed of cement and EP, the thermal conductivities of the composite boards containing RT28 increase by 15%-35% with the mass fraction increasing of RT28. The cubic test rooms that consist of six boards were built to evaluate the thermal energy storage performance, it is found that the maximum temperature different between the outside surface of the top board with the indoor temperature using the composite boards is 13.3 °C higher than that of the boards containing no RT28. The thermal mass increase of the built environment due to the application of composite boards can contribute to improving the indoor thermal comfort and reducing the energy consumption in the buildings.

  6. Preparation, Mechanical and Thermal Properties of Cement Board with Expanded Perlite Based Composite Phase Change Material for Improving Buildings Thermal Behavior

    Directory of Open Access Journals (Sweden)

    Rongda Ye

    2015-11-01

    Full Text Available Here we demonstrate the mechanical properties, thermal conductivity, and thermal energy storage performance of construction elements made of cement and form-stable PCM-Rubitherm® RT 28 HC (RT28/expanded perlite (EP composite phase change materials (PCMs. The composite PCMs were prepared by adsorbing RT28 into the pores of EP, in which the mass fraction of RT28 should be limited to be no more than 40 wt %. The adsorbed RT28 is observed to be uniformly confined into the pores of EP. The phase change temperatures of the RT28/EP composite PCMs are very close to that of the pure RT28. The apparent density and compression strength of the composite cubes increase linearly with the mass fraction of RT28. Compared with the thermal conductivity of the boards composed of cement and EP, the thermal conductivities of the composite boards containing RT28 increase by 15%–35% with the mass fraction increasing of RT28. The cubic test rooms that consist of six boards were built to evaluate the thermal energy storage performance, it is found that the maximum temperature different between the outside surface of the top board with the indoor temperature using the composite boards is 13.3 °C higher than that of the boards containing no RT28. The thermal mass increase of the built environment due to the application of composite boards can contribute to improving the indoor thermal comfort and reducing the energy consumption in the buildings.

  7. A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage.

    Science.gov (United States)

    Wang, Enyu; Kong, Xiangfei; Rong, Xian; Yao, Chengqiang; Yang, Hua; Qi, Chengying

    2016-11-05

    Phase change material (PCM) used in buildings can reduce the building energy consumption and indoor temperature fluctuation. A composite PCM has been fabricated by the binary eutectic mixture of tetradecanol (TD) and lauric acid (LA) absorbed into the expanded perlite (EP) using vacuum impregnation method, and its thermal conductivity was promoted by aluminium powder (AP) additive. Besides, the styrene-acrylic emulsion has been mixed with the composite PCM particles to form the protective film, so as to solve the problem of leakage. Thus, a novel PCM panel (PCMP) has been prepared using compression moulding forming method. The thermal property, microstructure characteristic, mechanical property, thermal conductivity, thermal reliability and leakage of the composite PCM have been investigated and analysed. Meanwhile, the thermal performance of the prepared PCMP was tested through PCMPs installed on the inside wall of a cell under outdoor climatic conditions. The composite PCM has a melting temperature of 24.9 °C, a freezing temperature of 25.2 °C, a melting latent heat of 78.2 J/g and a freezing latent heat of 81.3 J/g. The thermal conductivity test exposed that the thermal conductivity has been enhanced with the addition of AP and the latent heat has been decreased, but it still remains in a high level. The leakage test result has proven that liquid PCM leaking has been avoided by the surface film method. The thermal performance experiment has shown the significant function of PCMP about adjusting the indoor temperature and reducing the heats transferring between the wall inside and outside. In view of the thermal performance, mechanical property and thermal reliability results, it can be concluded that the prepared PCMP has a promising building application potential.

  8. A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

    Directory of Open Access Journals (Sweden)

    Enyu Wang

    2016-11-01

    Full Text Available Phase change material (PCM used in buildings can reduce the building energy consumption and indoor temperature fluctuation. A composite PCM has been fabricated by the binary eutectic mixture of tetradecanol (TD and lauric acid (LA absorbed into the expanded perlite (EP using vacuum impregnation method, and its thermal conductivity was promoted by aluminium powder (AP additive. Besides, the styrene-acrylic emulsion has been mixed with the composite PCM particles to form the protective film, so as to solve the problem of leakage. Thus, a novel PCM panel (PCMP has been prepared using compression moulding forming method. The thermal property, microstructure characteristic, mechanical property, thermal conductivity, thermal reliability and leakage of the composite PCM have been investigated and analysed. Meanwhile, the thermal performance of the prepared PCMP was tested through PCMPs installed on the inside wall of a cell under outdoor climatic conditions. The composite PCM has a melting temperature of 24.9 °C, a freezing temperature of 25.2 °C, a melting latent heat of 78.2 J/g and a freezing latent heat of 81.3 J/g. The thermal conductivity test exposed that the thermal conductivity has been enhanced with the addition of AP and the latent heat has been decreased, but it still remains in a high level. The leakage test result has proven that liquid PCM leaking has been avoided by the surface film method. The thermal performance experiment has shown the significant function of PCMP about adjusting the indoor temperature and reducing the heats transferring between the wall inside and outside. In view of the thermal performance, mechanical property and thermal reliability results, it can be concluded that the prepared PCMP has a promising building application potential.

  9. Synchrotron-based phase contrast-enhanced micro-computed tomography reveals delaminations and material tearing in water-expandable root fillings ex vivo

    NARCIS (Netherlands)

    Moinzadeh, A.T.; Farack, L.; Wilde, F.; Shemesh, H.; Zaslansky, P.

    2016-01-01

    Introduction: This study evaluated the integrity of calcium silicate sealer–based fillings made with hygro-expandable cones (HEC) that are commercially known as CPoint or Smartpoint. Methods: Fourteen human canines were prepared according to a standardized, conventional endodontic treatment protocol

  10. Effect of the addition of expanded vermiculite in the technological properties of ceramic materials of clay base; Efeito da adicao de vermiculita expandida nas propriedades tecnologicas de materiais Ceramicos de base argilosa

    Energy Technology Data Exchange (ETDEWEB)

    Lins, R.R.F.; Peixoto, R.S. Dutra; Macedo, D.A.; Nascimento, R.M.; Oliveira, G.V.M., E-mail: rivaldoeng.m@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

    2016-07-01

    This paper discusses the effects of adding expanded vermiculite ceramic block made from two different types of clay and analysis of the properties for three compositions at different sintering temperatures. Samples pressed at 40 MPa were sintered between 800 and 1100 ° C. The technological properties were determined according to the sintering temperature. The evaluation of the crystalline phases and microstructure was carried out by X-ray diffraction results indicated that with the addition of expanded vermiculite in the specimens there was an increase in porosity of the blocks together with the water absorption, therefore a reduction in apparent density, as well as the breakdown voltage of the three-point bending. This study demonstrates the possibility of formulating ceramic blocs order to improve the insulating properties of these materials. (author)

  11. What Expands in an Expanding Universe?

    Directory of Open Access Journals (Sweden)

    JOSÉ A. DE FREITAS PACHECO

    2015-12-01

    Full Text Available ABSTRACT In the present investigation, the possible effects of the expansion of the Universe on systems bonded either by gravitational or electromagnetic forces, are reconsidered. It will be shown that the acceleration (positive or negative of the expanding background, is the determinant factor affecting planetary orbits and atomic sizes. In the presently accepted cosmology (ΛCDM all bonded systems are expanding at a decreasing rate that tends to be zero as the universe enters in a de Sitter phase. It is worth mentioning that the estimated expansion rates are rather small and they can be neglected for all practical purposes.

  12. What Expands in an Expanding Universe?

    Science.gov (United States)

    Pacheco, José A De Freitas

    2015-01-01

    In the present investigation, the possible effects of the expansion of the Universe on systems bonded either by gravitational or electromagnetic forces, are reconsidered. It will be shown that the acceleration (positive or negative) of the expanding background, is the determinant factor affecting planetary orbits and atomic sizes. In the presently accepted cosmology (ΛCDM) all bonded systems are expanding at a decreasing rate that tends to be zero as the universe enters in a de Sitter phase. It is worth mentioning that the estimated expansion rates are rather small and they can be neglected for all practical purposes.

  13. Layouts of Expander Graphs

    OpenAIRE

    Dujmović, Vida; Sidiropoulos, Anastasios; Wood, David R.

    2015-01-01

    Bourgain and Yehudayoff recently constructed $O(1)$-monotone bipartite expanders. By combining this result with a generalisation of the unraveling method of Kannan, we construct 3-monotone bipartite expanders, which is best possible. We then show that the same graphs admit 3-page book embeddings, 2-queue layouts, 4-track layouts, and have simple thickness 2. All these results are best possible.

  14. Expanding Thurston maps

    CERN Document Server

    Bonk, Mario

    2017-01-01

    This monograph is devoted to the study of the dynamics of expanding Thurston maps under iteration. A Thurston map is a branched covering map on a two-dimensional topological sphere such that each critical point of the map has a finite orbit under iteration. It is called expanding if, roughly speaking, preimages of a fine open cover of the underlying sphere under iterates of the map become finer and finer as the order of the iterate increases. Every expanding Thurston map gives rise to a fractal space, called its visual sphere. Many dynamical properties of the map are encoded in the geometry of this visual sphere. For example, an expanding Thurston map is topologically conjugate to a rational map if and only if its visual sphere is quasisymmetrically equivalent to the Riemann sphere. This relation between dynamics and fractal geometry is the main focus for the investigations in this work.

  15. Silicon microfabricated beam expander

    Energy Technology Data Exchange (ETDEWEB)

    Othman, A., E-mail: aliman@ppinang.uitm.edu.my; Ibrahim, M. N.; Hamzah, I. H.; Sulaiman, A. A. [Faculty of Electrical Engineering, Universiti Teknologi MARA Malaysia, 40450, Shah Alam, Selangor (Malaysia); Ain, M. F. [School of Electrical and Electronic Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300,Nibong Tebal, Pulau Pinang (Malaysia)

    2015-03-30

    The feasibility design and development methods of silicon microfabricated beam expander are described. Silicon bulk micromachining fabrication technology is used in producing features of the structure. A high-precision complex 3-D shape of the expander can be formed by exploiting the predictable anisotropic wet etching characteristics of single-crystal silicon in aqueous Potassium-Hydroxide (KOH) solution. The beam-expander consist of two elements, a micromachined silicon reflector chamber and micro-Fresnel zone plate. The micro-Fresnel element is patterned using lithographic methods. The reflector chamber element has a depth of 40 µm, a diameter of 15 mm and gold-coated surfaces. The impact on the depth, diameter of the chamber and absorption for improved performance are discussed.

  16. Innovación en la reconstrucción del pabellón auricular disgenésico con tejido expandido e implante Innovation in congenital auricular anomaly reconstruction using expanded tissue and prosthetic material

    Directory of Open Access Journals (Sweden)

    P. Iwanyk

    2007-06-01

    Full Text Available En la reconstrucción de un pabellón auricular disgenésico se plantean, básicamente, dos desafíos, reproducir un esqueleto cartilaginoso auricular de forma, tamaño y proyección similar al pabellón auricular normal, y obtener piel suficiente que combine color, textura y grosor semejante a la circundante. Debido a la escasa cantidad de piel útil en esta localización y a la dificultad en el tallado del esqueleto cartilaginoso auricular, iniciamos en 2005 en nuestro Hospital la reconstrucción auricular mediante combinación de tejidos expandidos locales y materiales protésicos, logrando un excelente resultado de apariencia natural.Reconstruction of congenital auricular anomalies includes two essential challenges. The first one is to sculpt an auricular cartilaginous structure that matches the shape, size and projection of a standard ear. The second challenge arises from the scarcity of the usable skin in the area. Because of the difficulty of sculpting a proper cartilage framework and the scarce quantity of skin in the area, in 2005 we began in our hospital auricular reconstruction procedure combining tissue expanders and prosthetic materials achieving a natural appearance and an excellent result.

  17. Expandable gastroretentive dosage forms.

    Science.gov (United States)

    Klausner, Eytan A; Lavy, Eran; Friedman, Michael; Hoffman, Amnon

    2003-06-24

    Expandable gastroretentive dosage forms (GRDFs) have been designed for the past 3 decades. They were originally created for possible veterinary use, but later the design was modified for enhanced drug therapy in humans. These GRDFs are easily swallowed and reach a significantly larger size in the stomach due to swelling or unfolding processes that prolong their gastric retention time (GRT). After drug release, their dimensions are minimized with subsequent evacuation from the stomach. Gastroretentivity is enhanced by the combination of substantial dimensions with high rigidity of the dosage form to withstand the peristalsis and mechanical contractility of the stomach. Positive results were obtained in preclinical and clinical studies evaluating GRT of expandable GRDFs. Narrow absorption window drugs compounded in such systems have improved in vivo absorption properties. These findings are an important step towards the implementation of expandable GRDFs in the clinical setting. The current review deals with expandable GRDFs reported in articles and patents, and describes the physiological basis of their design. Using the dog as a preclinical screening model prior to human studies, relevant imaging techniques and pharmacokinetic-pharmacodynamic aspects of such delivery systems are also discussed.

  18. Materialism.

    Science.gov (United States)

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

  19. Lightweight High Strength Concrete with Expanded Polystyrene Beads

    OpenAIRE

    Subhan, Tengku Fitriani L

    2006-01-01

    This paper is a literature study about lightweight high strength concrete by incorporating expanded polystyrene beads. Basically polystyrene is disposal material from packaging industry. However, after being processed in a special manner, polystyrene can be expanded and used as lightweight concrete making material. Therefore, the use of expanded polystyrene beads in concrete is not only beneficial for engineering studies but also provide solution for the environmental problem

  20. Expandable LED array interconnect

    Science.gov (United States)

    Yuan, Thomas Cheng-Hsin; Keller, Bernd

    2011-03-01

    A light emitting device that can function as an array element in an expandable array of such devices. The light emitting device comprises a substrate that has a top surface and a plurality of edges. Input and output terminals are mounted to the top surface of the substrate. Both terminals comprise a plurality of contact pads disposed proximate to the edges of the substrate, allowing for easy access to both terminals from multiple edges of the substrate. A lighting element is mounted to the top surface of the substrate. The lighting element is connected between the input and output terminals. The contact pads provide multiple access points to the terminals which allow for greater flexibility in design when the devices are used as array elements in an expandable array.

  1. Grazing incidence beam expander

    Energy Technology Data Exchange (ETDEWEB)

    Akkapeddi, P.R.; Glenn, P.; Fuschetto, A.; Appert, Q.; Viswanathan, V.K.

    1985-01-01

    A Grazing Incidence Beam Expander (GIBE) telescope is being designed and fabricated to be used as an equivalent end mirror in a long laser resonator cavity. The design requirements for this GIBE flow down from a generic Free Electron Laser (FEL) resonator. The nature of the FEL gain volume (a thin, pencil-like, on-axis region) dictates that the output beam be very small. Such a thin beam with the high power levels characteristic of FELs would have to travel perhaps hundreds of meters or more before expanding enough to allow reflection from cooled mirrors. A GIBE, on the other hand, would allow placing these optics closer to the gain region and thus reduces the cavity lengths substantially. Results are presented relating to optical and mechanical design, alignment sensitivity analysis, radius of curvature analysis, laser cavity stability analysis of a linear stable concentric laser cavity with a GIBE. Fabrication details of the GIBE are also given.

  2. Expanding the HAWC Observatory

    Energy Technology Data Exchange (ETDEWEB)

    Mori, Johanna [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-17

    The High Altitude Water Cherenkov Gamma-Ray Observatory is expanding its current array of 300 water tanks to include 350 outrigger tanks to increase sensitivity to gamma rays above 10 TeV. This involves creating and testing hardware with which to build the new tanks, including photomultiplier tubes, high voltage supply units, and flash analog to digital converters. My responsibilities this summer included preparing, testing and calibrating that equipment.

  3. Bank Directors’ Perceptions of Expanded Auditor's Reports

    DEFF Research Database (Denmark)

    Boolaky, Pran Krishansing; Quick, Reiner

    2016-01-01

    of expanded audit reports, namely information on the assurance level, materiality levels and key audit matters (KAM), on bank director perceptions of the quality of the financial statements, the audit and the audit report, as well as on their credit approval decisions. We conduct an experiment involving......Subsequent to the financial crisis, standard setters developed suggestions for enhancing the audit function, in order to increase financial stability. One related idea is to expand the audit report disclosed to the public, to ensure that it is fit for purpose. This study investigates the impact...... the materiality level or KAM. As a consequence, standard setters should carefully analyse the effect of additional information before making decisions on expanding the content of the audit report. Such expansions are not necessarily perceived as useful by stakeholders. © 2016 John Wiley & Sons Ltd...

  4. The expanding universe

    CERN Document Server

    Lew, Kristi

    2011-01-01

    People have always been fascinated with the stars above and the universe that contains them. Over the years, astronomers have developed numerous theories to explain how the universe began, how it works, and what its ultimate fate will be. But all of the scientists' questions are far from answered. The Expanding Universe goes beyond the creation of the universe to explain how scientists think the universe works, grows, and changes, including what great thinkers Isaac Newton and Albert Einstein had to say about its fate. Readers will also learn about how researchers are slowly shedding light on

  5. Expanding Your Horizon 2015

    CERN Multimedia

    Kaltenhauser, Kristin

    2015-01-01

    Expanding your horizons is a bi-annual “Science Day” for girls aged 11 to 14, held at the University of Geneva on 14 November. The girls had the opportunity to take part in hands-on workshops held by local professional women in the field of science, mathematics, engineering and technology. For the fourth time, CERN was part of this event, offering three workshops as well as a booth at the Discovery Fair, including Higgnite, an interactive visualization of the Higgs Field.

  6. Expanding cosmic horizons of life

    Science.gov (United States)

    Wickramasinghe, Nalin C.; Narlikar, J. V.; Wickramasinghe, J. T.; Wainwright, Milton

    2003-02-01

    The conceptual boundaries of life are rapidly expanding far beyond the confines of our planet to encompass an ever-widening region of the universe. Complex organic molecules in interstellar dust and comets appear most plausibly to be biologically derived, or at least closely related spectroscopically and structurally to such material. A de novo origin of life from non-living material is reckoned to have so minuscule a probability that its occurrence once in the universe can be considered miracle enough. The widespread distribution of similar material (e.g with the characteristics of the diffuse infrared bands and 2175 absorption features) throughout the galaxy and in external galaxies adds weight to the theory of panspermia, where it is supposed that the components of life at a generic level are readily transferred from one place to another. Spectroscopic evidence consistent with life extends to redshifts z=0.5, and from elemental abundance studies alone (e.g, of C, O and metals) in distant galaxies the possibility of cosmic life extends to redshifts as high as z=3.

  7. Expander chunked codes

    Science.gov (United States)

    Tang, Bin; Yang, Shenghao; Ye, Baoliu; Yin, Yitong; Lu, Sanglu

    2015-12-01

    Chunked codes are efficient random linear network coding (RLNC) schemes with low computational cost, where the input packets are encoded into small chunks (i.e., subsets of the coded packets). During the network transmission, RLNC is performed within each chunk. In this paper, we first introduce a simple transfer matrix model to characterize the transmission of chunks and derive some basic properties of the model to facilitate the performance analysis. We then focus on the design of overlapped chunked codes, a class of chunked codes whose chunks are non-disjoint subsets of input packets, which are of special interest since they can be encoded with negligible computational cost and in a causal fashion. We propose expander chunked (EC) codes, the first class of overlapped chunked codes that have an analyzable performance, where the construction of the chunks makes use of regular graphs. Numerical and simulation results show that in some practical settings, EC codes can achieve rates within 91 to 97 % of the optimum and outperform the state-of-the-art overlapped chunked codes significantly.

  8. The Artful Universe Expanded

    Science.gov (United States)

    Barrow, John D.

    2005-07-01

    Our love of art, writes John Barrow, is the end product of millions of years of evolution. How we react to a beautiful painting or symphony draws upon instincts laid down long before humans existed. Now, in this enhanced edition of the highly popular The Artful Universe , Barrow further explores the close ties between our aesthetic appreciation and the basic nature of the Universe. Barrow argues that the laws of the Universe have imprinted themselves upon our thoughts and actions in subtle and unexpected ways. Why do we like certain types of art or music? What games and puzzles do we find challenging? Why do so many myths and legends have common elements? In this eclectic and entertaining survey, Barrow answers these questions and more as he explains how the landscape of the Universe has influenced the development of philosophy and mythology, and how millions of years of evolutionary history have fashioned our attraction to certain patterns of sound and color. Barrow casts the story of human creativity and thought in a fascinating light, considering such diverse topics as our instinct for language, the origins and uses of color in nature, why we divide time into intervals as we do, the sources of our appreciation of landscape painting, and whether computer-generated fractal art is really art. Drawing on a wide variety of examples, from the theological questions raised by St. Augustine and C.S. Lewis to the relationship between the pure math of Pythagoras and the music of the Beatles, The Artful Universe Expanded covers new ground and enters a wide-ranging debate about the meaning and significance of the links between art and science.

  9. Expanding Applications of SERS through Versatile Nanomaterials Engineering (Postprint)

    Science.gov (United States)

    2017-06-22

    directions We expect that advances in synthetic chemistry and materials engineering will continue to provide new directions for answer- ing chemical...biologically relevant molecules by SERS. 6. Conclusions Advances in synthetic chemistry and materials engineering have helped expand the applications of SERS...ROYAL SOCIETY OF CHEMISTRY (STINFO COPY) AIR FORCE RESEARCH LABORATORY MATERIALS AND MANUFACTURING DIRECTORATE WRIGHT-PATTERSON AIR FORCE BASE

  10. Expanding the knowledge translation metaphor.

    Science.gov (United States)

    Engebretsen, Eivind; Sandset, Tony Joakim; Ødemark, John

    2017-03-13

    Knowledge translation (KT) is a buzzword in modern medical science. However, there has been little theoretical reflection on translation as a process of meaning production in KT. In this paper, we argue that KT will benefit from the incorporation of a more theoretical notion of translation as an entangled material, textual and cultural process. We discuss and challenge fundamental assumptions in KT, drawing on theories of translation from the human sciences. We show that the current construal of KT as separate from and secondary to the original scientific message is close to the now deeply compromised literary view of translation as the simple act of copying the original. Inspired by recent theories of translation, we claim that KT can be more adequately understood in terms of a 'double supplement' - on the one hand, KT offers new approaches to the communication of scientific knowledge to different groups in the healthcare system with the aim of supplementing a lack of knowledge among clinicians (and patients). On the other, it demonstrates that a textual and cultural supplement, namely a concern with target audiences (clinicians and patients), is inevitable in the creation of an 'autonomous' science. Hence, the division between science and its translation is unproductive and impossible to maintain. We discuss some possible implications of our suggested shift in concept by drawing on pharmaceutical interventions for the prevention of HIV as a case. We argue that such interventions are based on a supplementary and paradoxical relation to the target audiences, both presupposing and denying their existence. More sophisticated theories of translation can lay the foundation for an expanded model of KT that incorporates a more adequate and reflective description of the interdependency of scientific, cultural, textual and material practices.

  11. The Expanding Universe: Dark Energy

    Energy Technology Data Exchange (ETDEWEB)

    Lincoln, Don [Fermilab; Nord, Brian [Fermilab

    2014-09-01

    In 1998, observations of distant supernovae led physicists that not only was the universe expanding, but the expansion was speeding up. In this article, we describe the evidence for an expanding universe and describe what physicists and cosmologists have learned in the intervening years. The target audience for this article is high school physics teachers and college physics professors at teaching institutions.

  12. Improving and expanding NGO programmes.

    Science.gov (United States)

    Mukhopadhyay, A

    1993-06-01

    India has massive problems and is in need of improving and expanding non governmental organization (NGO) programs by broadening the scope of NGO activities, identifying successful NGO activities, and by moving closer to the community to participate in their activities. The problems and experience in the last few decades indicate that with expansion bureaucratization takes place. The institution begins to depend on donors and follows donor-driven agendas. As more money is given by the government, many more so called GONGO or Government-NGO projects materialize. Another problem is that the government almost always approaches the NGOs for the implementation of a project, and there is complete lack of cooperation at the planning stage. The government is considering a loan from the World Bank and UNICEF to launch a mother and child health program, but there has not been any discussion with the dozens of people who have worked on issues concerning mother and child health issues for many years. There is a need to be more demanding of the government about the various programs that are implemented for the government. Very few NGO health and family welfare projects are run by ordinary nurses or ordinary Ayurvedic doctors under ordinary conditions. Since successful NGO work has to be extended to other parts of the country, they will have to be run by ordinary people with very ordinary resources. Over the years, the NGO community has become preoccupied with its own agenda. Today, despite very sophisticated equipment and infrastructure, they are not able to reach the 60,000-70,000 workers and employees. Some of the ideas with respect to the strengthens and weaknesses of community participation have to be shared. NGOs should include all the existing non governmental organizations throughout the country, and have a dialogue with other nongovernmental bodies such as trade unions. The challenge is to adjust the current agenda, prevailing style, and present way of operating and move

  13. Characterization of commercial expandable graphite fire retardants

    Energy Technology Data Exchange (ETDEWEB)

    Focke, Walter Wilhelm, E-mail: walter.focke@up.ac.za; Badenhorst, Heinrich; Mhike, Washington; Kruger, Hermanus Joachim; Lombaard, Dewan

    2014-05-01

    Highlights: • Expandable graphite is less well-ordered than its graphite bisulfate progenitor. • It includes graphite oxide as a randomly interstratified phase. • CO{sub 2}, CO and SO{sub 2} are released during thermal-driven exfoliation. - Abstract: Thermal analysis and other techniques were employed to characterize two expandable graphite samples. The expansion onset temperatures of the expandable graphite's were ca. 220 °C and 300 °C respectively. The key finding is that the commercial products are not just pure graphite intercalation compounds with sulfuric acid species intercalated as guest ions and molecules in between intact graphene layers. A more realistic model is proposed where graphite oxide-like layers are also randomly interstratified in the graphite flakes. These graphite oxide-like layers comprise highly oxidized graphene sheets which contain many different oxygen-containing functional groups. This model explains the high oxygen to sulfur atomic ratios found in both elemental analysis of the neat materials and in the gas generated during the main exfoliation event.

  14. Raw material of the Corumbatai formation at the region of ceramic pole of Santa Gertrudes - Sao Paulo, Brazil, with natural characteristics for fabrication of expanded clay; Materia-prima da formacao Corumbatai na regiao do polo ceramico de Santa Gertrudes - Sao Paulo, com caracteristicas naturais para fabricacao de argila expandida

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, M.M.T.; Zanardo, A.; Rocha, R.R.; Roveri, C.D., E-mail: mmoreno@rc.unesp.b [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Rio Claro, SP (Brazil). Dept. de Petrologia e Metalogenia

    2009-07-01

    This paper refers to the study of the bases material of the Corumbatai Formation (Parana Basin) from a clay mine, which presents limits for its use in ceramic tiles in dry grinding process due to its hardness and, especially, the high content of organic matter in relation to the clay overlaid. The characterization of the raw material and the product was accomplished by organic carbon analysis, X-ray diffraction, optical microscopy and test-firing. Firing conditions were determined to get expanded clay, using fast firing static kiln and a continuous roller kiln, both from laboratory equipment, getting samples with variable density up to the limit of expansion, with density that can reach values lower than 0,5g.cm{sup -3} because of the formation of closed pores and an external vitreous foil which provide a high mechanical resistance to the particles. (author)

  15. Expanding the Game Design Space

    DEFF Research Database (Denmark)

    Larsen, Lasse Juel; Majgaard, Gunver

    2016-01-01

    . It encapsulates the entire development process from the first ideas to the final game with emphasis on game design thinking. Our model of expanded game design space consists of four separate – yet interconnected – layers in the process of game development. The first layer addresses the importance of framing...... as a guideline for evaluating game design thinking and for measuring solutions made in the development process. To strengthen our model of expanded design space, we will present examples from our game design courses.......This article considers game design research in educational settings. Its focus is on how undergraduate students – particularly engineering students – learn computer game design. From observations conducted during our game design courses we have developed a model of expanded game design space...

  16. Flow boiling in expanding microchannels

    CERN Document Server

    Alam, Tamanna

    2017-01-01

    This Brief presents an up to date summary of details of the flow boiling heat transfer, pressure drop and instability characteristics; two phase flow patterns of expanding microchannels. Results obtained from the different expanding microscale geometries are presented for comparison and addition to that, comparison with literatures is also performed. Finally, parametric studies are performed and presented in the brief. The findings from this study could help in understanding the complex microscale flow boiling behavior and aid in the design and implementation of reliable compact heat sinks for practical applications.

  17. Materials Chemistry

    CERN Document Server

    Fahlman, Bradley D

    2011-01-01

    The 2nd edition of Materials Chemistry builds on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field. The 2nd edition continues to offer innovative coverage and practical perspective throughout. After briefly defining materials chemistry and its history, seven chapters discuss solid-state chemistry, metals, semiconducting materials, organic "soft" materials, nanomaterials, and materials characterization. All chapters have been thoroughly updated and expanded with, for example, new sections on ‘soft lithographic’ patterning, ‘click chemistry’ polymerization, nanotoxicity, graphene, as well as many biomaterials applications. The polymer and ‘soft’ materials chapter represents the largest expansion for the 2nd edition. Each ch...

  18. Expanding nail or expanding femur? An adverse event with the expandable intramedullary nail.

    Science.gov (United States)

    Gangopadhyay, Soham; Riley, Nicholas D; Sivaji, Chellappan K

    2010-01-01

    The expandable intramedullary nail is self-locking and has the advantage of reducing operating time and exposure to ionizing radiation. The nail is recommended for simple diaphyseal fractures involving the middle third of long bones, where the nail can bypass the fracture site by at least 5 cm. We encountered a unique complication with the expandable nail in a simple transverse shaft fracture at the junction of the middle and distal third of the left femur in an otherwise healthy 57-year-old man. The fracture was reduced and a 12-mm expandable nail was inserted. Following full expansion, intraoperative radiographs were obtained prior to closure. After six postoperative weeks, it was noted that the nail expanded the femoral canal, converting a simple fracture to a distally progressing comminuted fracture with a butterfly fragment. A review of the intraoperative radiographs showed slight widening of the medullary canal at the level of the fracture. As the alignment was satisfactory and callus was present, no further surgical intervention was considered. The patient was advised not to bear weight and was provided with a locked knee brace in extension to wear for six weeks. Radiographs at 12 weeks demonstrated good progress of healing with adequate callus and the patient was permitted to bear weight as tolerated and commence knee flexion. The fracture united satisfactorily at four months. This adverse experience emphasizes that caution should be exercised when expanding the nail, with close observation of the medullary canal diameter during the later stages of expansion.

  19. EFFECT OF INCORPORATING EXPANDED POLYSTYRENE ...

    African Journals Online (AJOL)

    2012-11-03

    Nov 3, 2012 ... Abstract. Incorporating expanded polystyrene granules in concrete matrix can produce lightweight polystyrene aggregate concrete of various densities. Workability which is an important property of concrete, affects the rate of placement and the degree of compaction of concrete. Inadequate compaction.

  20. Expanding the eukaryotic genetic code

    Science.gov (United States)

    Chin, Jason W.; Cropp, T. Ashton; Anderson, J. Christopher; Schultz, Peter G.

    2013-01-22

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  1. Expanding the eukaryotic genetic code

    Energy Technology Data Exchange (ETDEWEB)

    Chin, Jason W.; Cropp, T. Ashton; Anderson, J. Christopher; Schultz, Peter G.

    2017-02-28

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  2. Expanding awareness of docosahexaenoic acid during pregnancy.

    Science.gov (United States)

    Emmett, Rebecca; Akkersdyk, Shann; Yeatman, Heather; Meyer, Barbara J

    2013-04-02

    Pregnant women do not currently meet the consensus recommendation for docosahexaenoic acid (DHA) (≥200 mg/day). Pregnant women in Australia are not receiving information on the importance of DHA during pregnancy. DHA pregnancy education materials were developed using current scientific literature, and tested for readability and design aesthetics. The study aimed to evaluate their usefulness, the desire for pregnant women to receive these materials and whether a larger separate study (using a control group) is warranted to evaluate the influence the materials may have on increasing DHA consumption in pregnant women in Australia. Pregnant women (N = 118) were recruited at antenatal clinics at two NSW hospitals. Participants completed a 16-item questionnaire and DHA educational materials (pamphlet and shopping card) were provided. Participants were contacted via phone two weeks later and completed the second questionnaire (25-item, N = 74). Statistics were conducted in SPSS and qualitative data were analysed to identify common themes. Ninety three percent of women found the materials useful, with the main reason being it expanded their knowledge of DHA food sources. Only 34% of women had received prior information on DHA, yet 68% said they would like to receive information. Due to the small sample size and lack of a control group, this small study cannot provide a cause and effect relationship between the materials and nutrition related behaviours or knowledge, however the results indicate a potential positive influence towards increased fish consumption and awareness of DHA containing foods. This suggests a larger study, with a control group is warranted to identify the impact such materials could have on Australian pregnant women.

  3. Expanding Awareness of Docosahexaenoic Acid during Pregnancy

    Directory of Open Access Journals (Sweden)

    Barbara J. Meyer

    2013-04-01

    Full Text Available Pregnant women do not currently meet the consensus recommendation for docosahexaenoic acid (DHA (≥200 mg/day. Pregnant women in Australia are not receiving information on the importance of DHA during pregnancy. DHA pregnancy education materials were developed using current scientific literature, and tested for readability and design aesthetics. The study aimed to evaluate their usefulness, the desire for pregnant women to receive these materials and whether a larger separate study (using a control group is warranted to evaluate the influence the materials may have on increasing DHA consumption in pregnant women in Australia. Pregnant women (N = 118 were recruited at antenatal clinics at two NSW hospitals. Participants completed a 16-item questionnaire and DHA educational materials (pamphlet and shopping card were provided. Participants were contacted via phone two weeks later and completed the second questionnaire (25-item, N = 74. Statistics were conducted in SPSS and qualitative data were analysed to identify common themes. Ninety three percent of women found the materials useful, with the main reason being it expanded their knowledge of DHA food sources. Only 34% of women had received prior information on DHA, yet 68% said they would like to receive information. Due to the small sample size and lack of a control group, this small study cannot provide a cause and effect relationship between the materials and nutrition related behaviours or knowledge, however the results indicate a potential positive influence towards increased fish consumption and awareness of DHA containing foods. This suggests a larger study, with a control group is warranted to identify the impact such materials could have on Australian pregnant women.

  4. Expanding the Game Design Space

    DEFF Research Database (Denmark)

    Larsen, Lasse Juel; Majgaard, Gunver

    2016-01-01

    layer establishes correspondence between formal elements of computer games and the structure of problem-based creativity. It addresses how game design challenges should be formulated and how creative solutions can be measured. The fourth and final layer demonstrates how clear framing can act......This article considers game design research in educational settings. Its focus is on how undergraduate students – particularly engineering students – learn computer game design. From observations conducted during our game design courses we have developed a model of expanded game design space....... It encapsulates the entire development process from the first ideas to the final game with emphasis on game design thinking. Our model of expanded game design space consists of four separate – yet interconnected – layers in the process of game development. The first layer addresses the importance of framing...

  5. Morphological Transition in Rapidly Expanding Magmas

    Science.gov (United States)

    Kolinski, J.; Chakraborty, P.; Gioia, G.; Kieffer, S. W.

    2008-12-01

    Many explosive eruptions are initiated by rapid decompression of bubbly magma, which behaves as an elastic material during the decompression and fragments into discrete pieces following the decompression. To emulate the rapid decompression of bubbly magma, we subject a two-dimensional foam of soap bubbles to quasi-static expansion. A recent theory predicts that where a two-dimensional foam of soap bubbles is first subjected to expansion, the foam expands homogeneously. After a critical value of expansion is attained, the foam undergoes a morphological transition and separates into a large number of small bubbles immersed in a background of a few large bubbles [Vainchtein and Aref, Physics of Fluids 13, 2001]. In our experiments we verify the phenomenon of morphological transition under area expansion. We verity the predictions of Vainchtein and Aref, compare our results with the experimental results on rapidly expanding bubble-bearing viscoelastic fluids reported by [Namiki and Manga, Earth and Planetary Science Letters 236, 2005], and discuss the implications of our results for the rapid decompression of magmas.

  6. New expanded bed adsorbents for the recovery of DNA

    DEFF Research Database (Denmark)

    Theodossiou, Irini; Olander, M. A.; Sondergaard, M.

    2000-01-01

    A 20-40 mum pellicular high density (similar to3.7 g cm(-3)) expanded bed material has been designed for the capture of DNA and other large macromolecules. Anion exchangers fashioned out of these supports exhibited dramatically enhanced DNA binding capacities over commercial anion exchange...

  7. Expanding the Materials Palette for Selective Laser Melting of Metals

    OpenAIRE

    Kempen, Karolien

    2015-01-01

    Selective Laser Melting (SLM) is an Additive Ma nufacturing technique in which a product is built up in a layer-by-layer fashion, by melting me tal powder particles using a high power laser. It enables the production of complex threedimens ional parts with high density. As SLM is a re latively new manufacturing process, many obstacles have to be overcome and the goal of this wor k is to address some of the process ’ limitations and mainly to broaden the mate rials palette. Four different ...

  8. OCT Expanded Clinical Data Analysis

    Science.gov (United States)

    Van Baalen, Mary; Tafreshi, Ali; Patel, Nimesh; Young, Millennia; Mason, Sara; Otto, Christian; Samuels, Brian; Koslovsky, Matthew; Schaefer, Caroline; Taiym, Wafa; hide

    2017-01-01

    Vision changes identified in long duration space fliers has led to a more comprehensive clinical monitoring protocol. Optical Coherence Tomography (OCT) was recently implemented on board the International Space Station in 2013. NASA is collaborating with Heidelberg Engineering to expand our current OCT data analysis capability by implementing a volumetric approach. Volumetric maps will be created by combining the circle scan, the disc block scan, and the radial scan. This assessment may provide additional information about the optic nerve and further characterize changes related microgravity exposure. We will discuss challenges with collection and analysis of OCT data, present the results of this reanalysis and outline the potential benefits and limitations of the additional data.

  9. Preventive Ethics Through Expanding Education.

    Science.gov (United States)

    Ho, Anita; MacDonald, Lisa Mei-Hwa; Unger, David

    2016-03-01

    Healthcare institutions have been making increasing efforts to standardize consultation methodology and to accredit both bioethics training programs and the consultants accordingly. The focus has traditionally been on the ethics consultation as the relevant unit of ethics intervention. Outcome measures are studied in relation to consultations, and the hidden assumption is that consultations are the preferred or best way to address day-to-day ethical dilemmas. Reflecting on the data from an internal quality improvement survey and the literature, we argue that having general ethics education as a key function of ethics services may be more important in meeting the contemporaneous needs of acute care settings. An expanded and varied ethics education, with attention to the time constraints of healthcare workers' schedules, was a key recommendation brought forward by survey respondents. Promoting ethical reflection and creating a culture of ethics may serve to prevent ethical dilemmas or mitigate their effects.

  10. Expanding Human Cognition and Communication

    Energy Technology Data Exchange (ETDEWEB)

    Spohrer, Jim [IBM, North Castle, NY (United States); Pierce, Brian M. [Raytheon Co., Waltham, MA (United States); Murray, Cherry A. [Lucent Technologies, Murray Hill, NJ (United States); Golledge, Reginald G. [Univ. of California, Santa Barbara, CA (United States); Horn, Robert E. [Stanford Univ., CA (United States); Turkle, Sherry [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Yonas, Gerold [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Glicken Turnley, Jessica [Galisteo Consulting Group, Inc., Albuquerque, NM (United States); Pollack, Jordan [Brandeis Univ., Waltham, MA (United States); Burger, Rudy [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Robinett, Warren; Wilson, Larry Todd [Inst. of Electrical and Electronics Engineers (IEEE), Piscataway, NJ (United States); Bainbridge, W. S.; Canton, J.; Kuekes, P.; Loomis, J.; Penz, P.

    2013-01-01

    To be able to chart the most profitable future directions for societal transformation and corresponding scientific research, five multidisciplinary themes focused on major goals have been identified to fulfill the overall motivating vision of convergence described in the previous pages. The first, “Expanding Human Cognition and Communication,” is devoted to technological breakthroughs that have the potential to enhance individuals’ mental and interaction abilities. Throughout the twentieth century, a number of purely psychological techniques were offered for strengthening human character and personality, but evaluation research has generally failed to confirm the alleged benefits of these methods (Druckman and Bjork 1992; 1994). Today, there is good reason to believe that a combination of methods, drawing upon varied branches of converging science and technology, would be more effective than attempts that rely upon mental training alone.

  11. Expanding the Trilinos developer community.

    Energy Technology Data Exchange (ETDEWEB)

    Heroux, Michael Allen

    2010-10-01

    The Trilinos Project started approximately nine years ago as a small effort to enable research, development and ongoing support of small, related solver software efforts. The 'Tri' in Trilinos was intended to indicate the eventual three packages we planned to develop. In 2007 the project expanded its scope to include any package that was an enabling technology for technical computing. Presently the Trilinos repository contains over 55 packages covering a broad spectrum of reusable tools for constructing full-featured scalable scientific and engineering applications. Trilinos usage is now worldwide, and many applications have an explicit dependence on Trilinos for essential capabilities. Users come from other US laboratories, universities, industry and international research groups. Awareness and use of Trilinos is growing rapidly outside of Sandia. Members of the external research community are becoming more familiar with Trilinos, its design and collaborative nature. As a result, the Trilinos project is receiving an increasing number of requests from external community members who want to contribute to Trilinos as developers. To-date we have worked with external developers in an ad hoc fashion. Going forward, we want to develop a set of policies, procedures, tools and infrastructure to simplify interactions with external developers. As we go forward with multi-laboratory efforts such as CASL and X-Stack, and international projects such as IESP, we will need a more streamlined and explicit process for making external developers 'first-class citizens' in the Trilinos development community. This document is intended to frame the discussion for expanding the Trilinos community to all strategically important external members, while at the same time preserving Sandia's primary leadership role in the project.

  12. Microbial Biofilms and Breast Tissue Expanders

    Directory of Open Access Journals (Sweden)

    Melissa J. Karau

    2013-01-01

    Full Text Available We previously developed and validated a vortexing-sonication technique for detection of biofilm bacteria on the surface of explanted prosthetic joints. Herein, we evaluated this technique for diagnosis of infected breast tissue expanders and used it to assess colonization of breast tissue expanders. From April 2008 to December 2011, we studied 328 breast tissue expanders at Mayo Clinic, Rochester, MN, USA. Of seven clinically infected breast tissue expanders, six (85.7% had positive cultures, one of which grew Propionibacterium species. Fifty-two of 321 breast tissue expanders (16.2%, 95% CI, 12.3–20.7% without clinical evidence of infection also had positive cultures, 45 growing Propionibacterium species and ten coagulase-negative staphylococci. While vortexing-sonication can detect clinically infected breast tissue expanders, 16 percent of breast tissue expanders appear to be asymptomatically colonized with normal skin flora, most commonly, Propionibacterium species.

  13. Design of expanded bed supports for the recovery of plasmid DNA by anion exchange adsorption

    DEFF Research Database (Denmark)

    Theodossiou, Irini; Søndergaard, M.; Thomas, Owen R. T.

    2001-01-01

    and blueprints for improved expanded bed adsorbents have been put forward. The characterisation and testing of small (20-40 mum) high density (>3.7 g cm(-3)) pellicular expanded bed materials functionalised with various anion exchange structures is presented. In studies with calf thymus DNA, dynamic binding...

  14. Comparision of the expandable nail with locked nail in the treatment ...

    African Journals Online (AJOL)

    Background: Expandable nails achieve stability only by hydraulic expansion; therefore suggest less radiation exposure and operation time. In this study, we aimed to compare the results of expandable femoral nails with locked intramedullary nails in the treatment of diaphyseal fractures of femur. Materials and Methods: ...

  15. Discovery of Uniformly Expanding Universe

    Directory of Open Access Journals (Sweden)

    Cahill R. T.

    2012-01-01

    Full Text Available Saul Perlmutter and the Brian Schmidt – Adam Riess teams reported that their Friedmann-model GR-based analysis of their supernovae magnitude-redshift data re- vealed a new phenomenon of “dark energy” which, it is claimed, forms 73% of the energy / matter density of the present-epoch universe, and which is linked to the further claim of an accelerating expansion of the universe. In 2011 Perlmutter, Schmidt and Riess received the Nobel Prize in Physics “for the discovery of the accelerating ex- pansion of the Universe through observations of distant supernovae”. Here it is shown that (i a generic model-independent analysis of this data reveals a uniformly expanding universe, (ii their analysis actually used Newtonian gravity, and finally (iii the data, as well as the CMB fluctuation data, does not require “dark energy” nor “dark matter”, but instead reveals the phenomenon of a dynamical space, which is absent from the Friedmann model.

  16. Design of Modern Reactors for Synthesis of Thermally Expanded Graphite

    Science.gov (United States)

    Strativnov, Eugene V.

    2015-05-01

    One of the most progressive trends in the development of modern science and technology is the creation of energy-efficient technologies for the synthesis of nanomaterials. Nanolayered graphite (thermally exfoliated graphite) is one of the key important nanomaterials of carbon origin. Due to its unique properties (chemical and thermal stability, ability to form without a binder, elasticity, etc.), it can be used as an effective absorber of organic substances and a material for seal manufacturing for such important industries as gas transportation and automobile. Thermally expanded graphite is a promising material for the hydrogen and nuclear energy industries. The development of thermally expanded graphite production is resisted by high specific energy consumption during its manufacturing and by some technological difficulties. Therefore, the creation of energy-efficient technology for its production is very promising.

  17. Expanding the Interaction Equivalency Theorem

    Directory of Open Access Journals (Sweden)

    Brenda Cecilia Padilla Rodriguez

    2015-06-01

    Full Text Available Although interaction is recognised as a key element for learning, its incorporation in online courses can be challenging. The interaction equivalency theorem provides guidelines: Meaningful learning can be supported as long as one of three types of interactions (learner-content, learner-teacher and learner-learner is present at a high level. This study sought to apply this theorem to the corporate sector, and to expand it to include other indicators of course effectiveness: satisfaction, knowledge transfer, business results and return on expectations. A large Mexican organisation participated in this research, with 146 learners, 30 teachers and 3 academic assistants. Three versions of an online course were designed, each emphasising a different type of interaction. Data were collected through surveys, exams, observations, activity logs, think aloud protocols and sales records. All course versions yielded high levels of effectiveness, in terms of satisfaction, learning and return on expectations. Yet, course design did not dictate the types of interactions in which students engaged within the courses. Findings suggest that the interaction equivalency theorem can be reformulated as follows: In corporate settings, an online course can be effective in terms of satisfaction, learning, knowledge transfer, business results and return on expectations, as long as (a at least one of three types of interaction (learner-content, learner-teacher or learner-learner features prominently in the design of the course, and (b course delivery is consistent with the chosen type of interaction. Focusing on only one type of interaction carries a high risk of confusion, disengagement or missed learning opportunities, which can be managed by incorporating other forms of interactions.

  18. Pronounced biomaterial dependency in cartilage regeneration using nonexpanded compared with expanded chondrocytes

    NARCIS (Netherlands)

    Tsuchida, A.I.; Bekkers, J.E.J.; Beekhuizen, M.; Vonk, L.A.; Dhert, W.J.A.; Saris, Daniël B.F.; Creemers, L.B.

    2013-01-01

    We aimed to investigate freshly isolated compared with culture-expanded chondrocytes with respect to early regenerative response, cytokine production and cartilage formation in response to four commonly used biomaterials. Materials & methods: Chondrocytes were both directly and after expansion to

  19. Spherical Accretion in a Uniformly Expanding Universe

    Science.gov (United States)

    Colpi, Monica; Shapiro, Stuart L.; Wasserman, Ira

    1996-10-01

    We consider spherically symmetric accretion of material from an initially homogeneous, uniformly expanding medium onto a Newtonian point mass M. The gas is assumed to evolve adiabatically with a constant adiabatic index F, which we vary over the range Γ ɛ [1, 5/3]. We use a one-dimensional Lagrangian code to follow the spherical infall of material as a function of time. Outflowing shells gravitationally bound to the point mass fall back, giving rise to a inflow rate that, after a rapid rise, declines as a power law in time. If there were no outflow initially, Bondi accretion would result, with a characteristic accretion time-scale ta,0. For gas initially expanding at a uniform rate, with a radial velocity U = R/t0 at radius R, the behavior of the flow at all subsequent times is determined by ta,0/t0. If ta,0/t0 ≫ 1, the gas has no time to respond to pressure forces, so the fluid motion is nearly collisionless. In this case, only loosely bound shells are influenced by pressure gradients and are pushed outward. The late-time evolution of the mass accretion rate Mdot is close to the result for pure dust, and we develop a semianalytic model that accurately accounts for the small effect of pressure gradients in this limit. In the opposite regime, ta,0/t0 ≪ 1, pressure forces significantly affect the motion of the gas. At sufficiently early times, t ≤ ttr, the flow evolved along a sequence of quasi-stationary, Bondi-like states, with a time-dependent Mdot determined by the slowly varying gas density at large distances. However, at later times, t ≥ ttr, the fluid flow enters a dustllke regime; ttr is the time when the instantaneous Bondi accretion radius reaches the marginally bound radius. The transition time ttr depends sensitively on ta,0/t0 for a given Γ and can greatly exceed t0. We show that there exists a critical value Γ = 11/9, below which the transition from fluid to ballistic motion disappears. As one application of our calculations, we consider the

  20. Strain rate dependency and fragmentation pattern of expanding warheads

    Directory of Open Access Journals (Sweden)

    John F. Moxnes

    2015-03-01

    Full Text Available For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104–105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar (SHB, which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104–105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle (RSPH software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.

  1. A comparison of skin expansion and contraction between one expander and two expanders: a preliminary study.

    Science.gov (United States)

    Zhang, Gan-lin; Zhang, Jin-ming; Ji, Chen-yang; Meng, Hong; Huang, Jian-hua; Luo, He-yuan; Zhang, Hua-sheng; Liu, Xiao-tao; Hong, Xiao-fang

    2013-12-01

    This study aimed to compare the difference between the skin expansion and contraction rates for an expanded flap with one versus two expanders. The study cohort comprised 24 cases of two overlapping expanders and 15 cases of a single implanted expander involving 22 patients. The method of "wet-cloth sampling" was applied to measure the expanded flap area and the initial unexpanded area and to calculate the skin expansion rate. Two points 5 cm apart in the center of the expanded flap were selected before the second surgical stage. After removal of the expander, the distance between the two fixed points was measured and recorded. The contraction rate of the expanded flap then was calculated. During the same period of expansion in the two groups (p = 0.06, >0.01), the skin expansion rate was 3.5 ± 0.9 % in the group with two overlapping expanders and 2.6 ± 0.6 % in the control group. The difference between the two groups was statistically significant (p = 0.002, 0.05). We fitted a linear regression model that was Y = 0.533 − 0.003X, where Y was the contraction rate of the expanded flap and X was the period of expansion. The contraction rate of the expanded flap was negatively correlated with the period of expansion. Compared with the traditional method of implanting a single expander, the new method of overlapping two expanders in a single cavity increased the skin expansion rate. The instantly expanded flap contraction rate did not differ significantly between the two groups, so the amount of expanded skin area absolutely increased. The clinical application of the new method is worth promoting. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

  2. ELECTRORHEOLOGICAL PROPERTIES OF BIODEGRADABLE CHITOSAN/EXPANDED PERLITE COMPOSITES

    Directory of Open Access Journals (Sweden)

    Mehmet Çabuk

    2016-08-01

    Full Text Available In this study, chitosan (CS/expanded perlite (EP composites with different chitosan fractions (10%, 20% and 50% were prepared by absorbing chitosan into porous networks of expanded perlite, as a new hybrid smart electrorheological (ER material. Structural and morphological characterizations of the composites were carried out by FTIR and SEM-EDS techniques. Also, apparent density, particle size, and conductivity of the CS/EP composites were determined. Finally, the effects of electric field strength (E, shear rate, shear stress, and temperature onto ER behavior of the CS/EP/silicone oil system were investigated. The CS/EP/SO ER fluid system showed reversible electrorheological activity when subjected to external electric field strength by showing shear thinning non-Newtonian viscoelastic behavior. The yield stress value reached to 1250 Pa under E = 3 kV/mm for CS/EP3 composite.

  3. Expanding Scope of Practice for Ontario Optometrists

    National Research Council Canada - National Science Library

    Emily Bray; Ivy Bourgault

    2017-01-01

    In 2011, The Optometry Act, 1991 was amended to include The Designated Drugs and Standards of Practice Regulation which expanded the scope of practice for Ontario optometrists to include prescribing...

  4. Efficacy of Nickel-Titanium Palatal Expanders

    Directory of Open Access Journals (Sweden)

    Rahul Paul

    2011-01-01

    Conclusion : To conclude, a Ni-Ti expander brings about expansion by a combination of orthodontic and orthopedic effects by an increase in maxillary intermolar, maxillary intercanine and mandibular intercanine widths as also the opening of the midpalatal suture.

  5. Interlayer expanded molybdenum disulfide nanosheets assembly for electrochemical supercapacitor with enhanced performance

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Huaqing; Wang, Shutao; Zhang, Shuo; Wang, Yihe; Xu, Qingfei; Hu, Wenjie [College of Science, China University of Petroleum (East China), 66 Changjiang West Road, Qingdao Economic Development Zone, Qingdao, Shandong, 266580 (China); Zhou, Yan, E-mail: yanzhou@upc.edu.cn [College of Science, China University of Petroleum (East China), 66 Changjiang West Road, Qingdao Economic Development Zone, Qingdao, Shandong, 266580 (China); State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), 66 Changjiang West Road, Qingdao Economic Development Zone, Qingdao, Shandong, 266580 (China); Wang, Zhaojie [College of Science, China University of Petroleum (East China), 66 Changjiang West Road, Qingdao Economic Development Zone, Qingdao, Shandong, 266580 (China); An, Changhua [College of Science, China University of Petroleum (East China), 66 Changjiang West Road, Qingdao Economic Development Zone, Qingdao, Shandong, 266580 (China); College of Chemistry and Chemical Engineering, Tianjin University of Technology, Tianjin, 300384 (China); Zhang, Jun, E-mail: zhangj@upc.edu.cn [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), 66 Changjiang West Road, Qingdao Economic Development Zone, Qingdao, Shandong, 266580 (China)

    2017-05-01

    Rational structural design for electrode materials is essential for fabricating high performance supercapacitors. In this work, we demonstrated a novel way to prepare incompact MoS{sub 2} nanosheets assembled nanorods with the interlayer of MoS{sub 2} nanosheets expanded to 0.89 nm, namely layer expanded MoS{sub 2} nanorods (LE-MoS{sub 2} NRs). The material was characterized by XRD, XPS and electron microscopes. The XRD data and HRTEM images confirmed the existence of expanded interlayer of MoS{sub 2} nanosheets. N{sub 2} adsorption-desorption isotherms of LE-MoS{sub 2} NRs indicated high specific area up to 37.0 m{sup 2} g{sup −1}. It was found that the expanded interlayer spacing can benefit the ion transportation within the MoS{sub 2} interlayers. The as-prepared electrode material showed capacitance up to 231 F g{sup −1} at 1 A g{sup −1} charge-discharge current and cycling stability test indicated high capacitance of 177 F g{sup −1} was retained after 1000 cycles. - Highlights: • High performance electrochemical supercapacitor electrode material. • Interlayer expanded MoS{sub 2} to achieve enhanced capacitance. • Facile hydrothermal synthesis of interlayer expanded MoS{sub 2}. • MoS{sub 2} nanosheets assembled incompact nanorods.

  6. Cellular Concrete Bricks with Recycled Expanded Polystyrene Aggregate

    Directory of Open Access Journals (Sweden)

    Juan Bosco Hernández-Zaragoza

    2013-01-01

    Full Text Available Cellular concrete bricks were obtained by using a lightweight mortar with recycled expanded polystyrene aggregate instead of sandy materials. After determining the block properties (absorption, compressive strength, and tensile stresses, it was found that this brick meets the requirements of the masonry standards used in Mexico. The obtained material is lighter than the commercial ones, which facilitates their rapid elaboration, quality control, and transportation. It is less permeable, which helps prevent moisture formation retaining its strength due to the greater adherence shown with dry polystyrene. It was more flexible, which makes it less vulnerable to cracking walls due to soil displacements. Furthermore, it is economical, because it uses recyclable material and has properties that prevent deterioration increasing its useful life. We recommend the use of the fully dry EP under a dry environment to obtain the best properties of brick.

  7. Non-activated high surface area expanded graphite oxide for supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Vermisoglou, E.C.; Giannakopoulou, T.; Romanos, G.E.; Boukos, N.; Giannouri, M. [Institute of Nanoscience and Nanotechnology “Demokritos”, 153 43 Ag. Paraskevi, Attikis (Greece); Lei, C.; Lekakou, C. [Division of Mechanical, Medical, and Aerospace Engineering, Faculty of Engineering and Physical Sciences, University of Surrey, Guildford GU2 7XH (United Kingdom); Trapalis, C., E-mail: c.trapalis@inn.demokritos.gr [Institute of Nanoscience and Nanotechnology “Demokritos”, 153 43 Ag. Paraskevi, Attikis (Greece)

    2015-12-15

    Graphical abstract: - Highlights: • One-step exfoliation and reduction of graphite oxide via microwave irradiation. • Effect of pristine graphite (type, flake size) on the microwave expanded material. • Effect of pretreatment and oxidation cycles on the produced expanded material. • Expanded graphene materials with high BET surface areas (940 m{sup 2}/g–2490 m{sup 2}/g). • Non-activated graphene based materials suitable for supercapacitors. - Abstract: Microwave irradiation of graphite oxide constitutes a facile route toward production of reduced graphene oxide, since during this treatment both exfoliation and reduction of graphite oxide occurs. In this work, the effect of pristine graphite (type, size of flakes), pretreatment and oxidation cycles on the finally produced expanded material was examined. All the types of graphite that were tested afforded materials with high BET surface areas ranging from 940 m{sup 2}/g to 2490 m{sup 2}/g, without intervening an activation stage at elevated temperature. SEM and TEM images displayed exfoliated structures, where the flakes were significantly detached and curved. The quality of the reduced graphene oxide sheets was evidenced both by X-ray photoelectron spectroscopy and Raman spectroscopy. The electrode material capacitance was determined via electrochemical impedance spectroscopy and cyclic voltammetry. The materials with PEDOT binder had better performance (∼97 F/g) at low operation rates while those with PVDF binder performed better (∼20 F/g) at higher rates, opening up perspectives for their application in supercapacitors.

  8. A Study of Flexible Composites for Expandable Space Structures

    Science.gov (United States)

    Scotti, Stephen J.

    2016-01-01

    Payload volume for launch vehicles is a critical constraint that impacts spacecraft design. Deployment mechanisms, such as those used for solar arrays and antennas, are approaches that have successfully accommodated this constraint, however, providing pressurized volumes that can be packaged compactly at launch and expanded in space is still a challenge. One approach that has been under development for many years is to utilize softgoods - woven fabric for straps, cloth, and with appropriate coatings, bladders - to provide this expandable pressure vessel capability. The mechanics of woven structure is complicated by a response that is nonlinear and often nonrepeatable due to the discrete nature of the woven fiber architecture. This complexity reduces engineering confidence to reliably design and certify these structures, which increases costs due to increased requirements for system testing. The present study explores flexible composite materials systems as an alternative to the heritage softgoods approach. Materials were obtained from vendors who utilize flexible composites for non-aerospace products to determine some initial physical and mechanical properties of the materials. Uniaxial mechanical testing was performed to obtain the stress-strain response of the flexible composites and the failure behavior. A failure criterion was developed from the data, and a space habitat application was used to provide an estimate of the relative performance of flexible composites compared to the heritage softgoods approach. Initial results are promising with a 25% mass savings estimated for the flexible composite solution.

  9. Electromagnetism principles, materials, and applications

    CERN Document Server

    Sorge, Korey

    2018-01-01

    This book meets the needs of professors and students by encompassing all necessary information into one single comprehensive text by restructuring presentation, simplifying mathematics, reinforcing physics, and fully expanding topics related to materials.

  10. Design of laser afocal zoom expander system

    Science.gov (United States)

    Jiang, Lian; Zeng, Chun-Mei; Hu, Tian-Tian

    2018-01-01

    Laser afocal zoom expander system due to the beam diameter variable, can be used in the light sheet illumination microscope to observe the samples of different sizes. Based on the principle of afocal zoom system, the laser collimation and beam expander system with a total length of less than 110mm, 6 pieces of spherical lens and a beam expander ratio of 10 is designed by using Zemax software. The system is focused on laser with a wavelength of 532nm, divergence angle of less than 4mrad and incident diameter of 4mm. With the combination of 6 spherical lens, the beam divergence angle is 0.4mrad at the maximum magnification ratio, and the RMS values at different rates are less than λ/4. This design is simple in structure and easy to process and adjust. It has certain practical value.

  11. Supported eText in Captioned Videos: A Comparison of Expanded versus Standard Captions on Student Comprehension of Educational Content

    Science.gov (United States)

    Anderson-Inman, Lynne; Terrazas-Arellanes, Fatima E.

    2009-01-01

    Expanded captions are designed to enhance the educational value by linking unfamiliar words to one of three types of information: vocabulary definitions, labeled illustrations, or concept maps. This study investigated the effects of expanded captions versus standard captions on the comprehension of educational video materials on DVD by secondary…

  12. Carbohydrate plasma expanders for passive tumor targeting

    DEFF Research Database (Denmark)

    Hoffmann, Stefan; Caysa, Henrike; Kuntsche, Judith

    2013-01-01

    The objective of this study was to investigate the suitability of carbohydrate plasma volume expanders as a novel polymer platform for tumor targeting. Many synthetic polymers have already been synthesized for targeted tumor therapy, but potential advantages of these carbohydrates include...... inexpensive synthesis, constant availability, a good safety profile, biodegradability and the long clinical use as plasma expanders. Three polymers have been tested for cytotoxicity and cytokine activation in cell cultures and conjugated with a near-infrared fluorescent dye: hydroxyethyl starches (HES 200 k...

  13. Replicating an expanded genetic alphabet in cells.

    Science.gov (United States)

    Chaput, John C

    2014-09-05

    Recent advances in synthetic biology have made it possible to replicate an unnatural base pair in living cells. This study highlights the technologies developed to create a semisynthetic organism with an expanded genetic alphabet and the potential challenges of moving forward. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Expanding the Focus of Career Assessment.

    Science.gov (United States)

    Lock, Jared D.; Hogan, Robert

    2000-01-01

    Issues affecting career assessment include change in the focus and definition of career, emphasis on quality of work life, expansion of career paths, increased amount of career information available on the Internet, and questionable quality of online assessment. An expanded model of career assessment now includes technical fit, personal fit,…

  15. Expanding CTE Opportunities through Blended Learning

    Science.gov (United States)

    McKinstry, Elizabeth

    2012-01-01

    The global economy, 21st century skills, knowledge society, college and career readiness, digital and project-based learning are all common terms to educators who are expanding their learning environments beyond the classroom to meet the needs of all students. It is common knowledge that the rapid technological advances of this century have…

  16. Expanding the Reader Landscape of Histone Acylation.

    Science.gov (United States)

    Khan, Abid; Bridgers, Joseph B; Strahl, Brian D

    2017-04-04

    In this issue of Structure,Klein et al. (2017) expand our understanding of what reader domains bind to by showing that MORF, a double PHD domain containing lysine acetyltransferase, is a preferential reader of histone lysine acylation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Sulfonated graphenes catalyzed synthesis of expanded porphyrins ...

    Indian Academy of Sciences (India)

    A newer synthesis of sulfonic acid functionalized graphenes have been developed, which have been characterized, examined as heterogeneous solid acid carbocatalyst in the synthesis of selected expanded porphyrins in different reaction conditions. This environment-friendly catalyst avoids the use of toxic catalysts and ...

  18. Expanding Your Horizons Conference in Geneva

    CERN Multimedia

    Chromek-Burckhart, Doris

    2011-01-01

    CERN and its experiments participated in Expanding Your Horizons (EYH) in Science and Mathematics conference in Geneva on 12th November. EYH nurture girls' interest in science and math courses to encourage them to consider careers in science, technology, engineering, and math.

  19. Sulfonated graphenes catalyzed synthesis of expanded porphyrins ...

    Indian Academy of Sciences (India)

    Abstract. A newer synthesis of sulfonic acid functionalized graphenes have been developed, which have been characterized, examined as heterogeneous solid acid carbocatalyst in the synthesis of selected expanded porphyrins in different reaction conditions. This environment-friendly catalyst avoids the use of toxic ...

  20. Technical Note: Effect of Incorporating Expanded Polystyrene ...

    African Journals Online (AJOL)

    Incorporating expanded polystyrene granules in concrete matrix can produce lightweight polystyrene aggregate concrete of various densities. Workability which is an important property of concrete, aects the rate of placement and the degree of compaction of concrete. Inadequate compaction leads to reduction in both ...

  1. Hubble, Hubble's Law and the Expanding Universe

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 14; Issue 3. Hubble, Hubble's Law and the Expanding Universe. J S Bagla. General Article Volume 14 Issue 3 March 2009 pp 216-225. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/014/03/0216-0225 ...

  2. Expanding the collaboration between CERN and Pakistan

    CERN Multimedia

    2002-01-01

    Parvez Butt, chairman of the Pakistan Atomic Energy Commission, and CERN Director General, Luciano Maiani, signed a letter of intent last week to expand collaboration. Through an agreement which should be formalized within a few months, Pakistan would make a substantial contribution to the LHC and its detectors, coordinated by the Pakistani National Centre of Physics.

  3. Circle diffeomorphisms forced by expanding circle maps

    NARCIS (Netherlands)

    Homburg, A.J.

    2012-01-01

    We discuss the dynamics of skew product maps defined by circle diffeomorphisms forced by expanding circle maps. We construct an open class of such systems that are robustly topologically mixing and for which almost all points in the same fiber converge under iteration. This property follows from the

  4. Discrete Groups, Expanding Graphs and Invariant Measures

    CERN Document Server

    Lubotzky, Alexander

    2009-01-01

    Presents the solutions to two problems: the first is the construction of expanding graphs - graphs which are of fundamental importance for communication networks and computer science, and the second is the Ruziewicz problem concerning the finitely additive invariant measures on spheres

  5. Expanding Educational Excellence: The Power of Schools

    Science.gov (United States)

    Coleman, Mary Ruth; Winn, Donna-Marie; Harradine, Christine

    2012-01-01

    In this paper, the authors explore four major barriers to academic success that must be addressed, briefly describe two projects that have worked to address these barriers, and make recommendations for moving forward as they work to expand educational excellence for all students. They provide examples of the myriad ways in which schools have the…

  6. Expanded Core Curriculum: 12 Years Later

    Science.gov (United States)

    Lohmeier, Keri; Blankenship, Karen; Hatlen, Phil

    2009-01-01

    This study investigated changes in teachers' and parents' understanding and implementation of or philosophy on the implementation of the content areas of the expanded core curriculum for students who are visually impaired. The results demonstrated some changes since the original survey results were reported in 1998 and a discrepancy between the…

  7. CLASSICS WHY THE UNIVERSE IS EXPANDING

    Indian Academy of Sciences (India)

    (H. G. Wells, The Time Machine and other Stories). WHY IS THE UNIVERSE EXPANDING? Chemical Explosion and Astrophysical Explosion Similarities and Differences. The expansion of the Universe is a reliably established fact. There was the “Big Bang” about 15 billion years ago. But why did it happen? What are the ...

  8. Hubble, Hubble's Law and the Expanding Universe

    Indian Academy of Sciences (India)

    Srimath

    H ubble's nam e is associated closely w ith the idea of an expanding universe as he discovered the relation between the recession velocity and the distances of galaxies. H ubble also did a lot of pioneering w ork on the distribution of galaxies in the universe. In this article we take a look at H ubble's law and discuss how it ...

  9. Women Engineering Faculty: Expanding the Pipeline

    Science.gov (United States)

    Greni, Nadene Deiterman

    2006-01-01

    The purpose for this case study was to explore the features of undergraduate engineering departmental and college support that influenced the persistence of women students. Women engineering faculty members were among the participants at three Land Grant universities in the Midwest. The data revealed the theme, Expanding the Pipeline, and…

  10. Expanded austenite, crystallography and residual stress

    DEFF Research Database (Denmark)

    Christiansen, Thomas; Hummelshøj, Thomas Strabo; Somers, Marcel A. J.

    2010-01-01

    compositions and (b) unravelling of the contributions of stress-depth and composition-depth profiles in expanded austenite layers are summarised and discussed. It is shown through simulation of line profiles that the combined effects of composition gradients, stress gradients and stacking fault gradients can...

  11. Effect of support structure on CO2 adsorption properties of pore-expanded hyperbranched aminosilicas

    KAUST Repository

    Drese, Jeffrey H.

    2012-03-01

    Hyperbranched aminosilica (HAS) CO 2 adsorbents are prepared by the ring-opening polymerization of aziridine from SBA-15 mesoporous silica, as in the original synthesis of HAS materials, as well as over an array of new support materials with substantially larger average pore diameters to elucidate the effect of support porosity on final adsorbent properties. Pore-expanded hyperbranched aminosilica (PEHAS) CO 2 adsorbents are prepared from several different pore-expanded, ordered mesoporous silicas including pore-expanded SBA-15, mesocellular foam, and a large-pore commercial silica. The effect of the nature of the silica support is determined by examining the degree of aziridine polymerization and the CO 2 adsorption kinetics and capacities of the resulting organic/inorganic hybrid materials. Comparisons are made to non-pore-expanded SBA-15 based HAS adsorbents, reported previously, where pores become blocked at higher amine loadings. The PEHAS materials unexpectedly possess lower amine loadings than the previously reported HAS materials and do not exhibit pore blocking. The use of acetic acid as a catalyst during PEHAS synthesis only marginally increases amine loading. The adsorption kinetics of PEHAS adsorbents are similar to HAS adsorbents with low amine loadings and do not show the detrimental effects of pore-blocking. However, the inability to synthesize PEHAS adsorbents with high amine loadings via this approach limits the total amount of CO 2 captured per gram of material, compared to HAS adsorbents with high amine loadings. © 2011 Elsevier Inc. All rights reserved.

  12. Refrigeration generation using expander-generator units

    Science.gov (United States)

    Klimenko, A. V.; Agababov, V. S.; Koryagin, A. V.; Baidakova, Yu. O.

    2016-05-01

    The problems of using the expander-generator unit (EGU) to generate refrigeration, along with electricity were considered. It is shown that, on the level of the temperatures of refrigeration flows using the EGU, one can provide the refrigeration supply of the different consumers: ventilation and air conditioning plants and industrial refrigerators and freezers. The analysis of influence of process parameters on the cooling power of the EGU, which depends on the parameters of the gas expansion process in the expander and temperatures of cooled environment, was carried out. The schematic diagram of refrigeration generation plant based on EGU is presented. The features and advantages of EGU to generate refrigeration compared with thermotransformer of steam compressive and absorption types were shown, namely: there is no need to use the energy generated by burning fuel to operate the EGU; beneficial use of the heat delivered to gas from the flow being cooled in equipment operating on gas; energy production along with refrigeration generation, which makes it possible to create, using EGU, the trigeneration plants without using the energy power equipment. It is shown that the level of the temperatures of refrigeration flows, which can be obtained by using the EGU on existing technological decompression stations of the transported gas, allows providing the refrigeration supply of various consumers. The information that the refrigeration capacity of an expander-generator unit not only depends on the parameters of the process of expansion of gas flowing in the expander (flow rate, temperatures and pressures at the inlet and outlet) but it is also determined by the temperature needed for a consumer and the initial temperature of the flow of the refrigeration-carrier being cooled. The conclusion was made that the expander-generator units can be used to create trigeneration plants both at major power plants and at small energy.

  13. EXPANDED PERLITE, EXPANDED VERMICULITE AND MICROSPHERES AS FILLERS IN NEW GENERATION PAPER PULP MIXTURES USED FOR CONTACT WITH LIQUID METAL

    Directory of Open Access Journals (Sweden)

    Zbigniew Zawieja

    2015-05-01

    Full Text Available Liquid metal when filling sand casting mould while pouring it out from ladle at the first moment comes across the sprue/gate system of the mould the purpose of which is to transfer liquid metal and feed the mould recess. The materials presently used for the elements of the sprue/gate systems are based on ceramics or the mixtures based on paper pulp. In this study the use of alternative mineral additions such as expanded perlite, expanded vermiculite, and microspheres as the fillers to paper pulp acquired from waste-paper for the use for the elements of mould sprue/gate systems or also other applications for the contact with liquid metal are presented. Experimental mould tube shapes made on the basis of the paper pulp based mixture patented by the authors were poured over with liquid metal. For the comparison, ceramic shapes and commercially available cellulose shapes were investigated in the same way. In order to compare the crystallization processes, a measurement of the cooling off liquid metal was carried out for all the analysed tube samples. From the so obtained metal samples metallographic microsections were made to compare cast iron microstructures. The results obtained from the investigations carried out have shown that the patented paper pulp based mixture may well be applied as an alternative material used for the elements of the sprue/gate systems for disposable sand moulds.

  14. Influence of processing conditions on the morphology of expanded perlite/polypropylene composites

    Science.gov (United States)

    Mattausch, H.; Laske, S.; Cirar, K.; Flachberger, H.; Holzer, C.

    2014-05-01

    Perlite is an oversaturated, volcanic, glassy rock, which has chemically bound water from 2 to 5 wt%. Upon heating, perlite can be expanded up to 20 times of its original volume. Important applications are in the field of building industry, in refrigeration engineering or the pharmaceutical industry. As mineral filler in polymers, expanded perlite can increase the thermal conductivity, the viscosity and the mechanical properties of polypropylene composites. But there are still many challenges that must be analyzed to reach the full potential of those composites. This research work focuses on the morphology of expanded perlite/polypropylene (PP) compounds and the interactions between filler and polymer. To achieve good performance a homogenous dispersion of the filler in the polymer matrix is needed because the enhancement of the material correlates strongly with the morphology of the composite. Therefore it is necessary to characterize the microstructure of these materials in order to establish adequate structure-process-property relationships. The expanded perlite/PP composites were compounded with a co-rotating twin screw extruder Theysohn TSK 30/40D. For producing the closed cell expanded perlite a new technology, the bublon process, was used. For the material characterization two particles sizes were chosen and the filler content was varied at 5, 10 and 15 wt%. For the analysis of the effects of the screw geometry, two setups have been chosen for the processing of the materials. The produced materials were analyzed by scanning electron microscope (SEM) and tensile testing. The results show a reinforcement effect of the filler and differences in the inner structure of expanded perlite and in the morphology.

  15. Influence of processing conditions on the morphology of expanded perlite/polypropylene composites

    Energy Technology Data Exchange (ETDEWEB)

    Mattausch, H., E-mail: hannelore.mattausch@unileoben.ac.at, E-mail: stephan.laske@unileoben.ac.at; Laske, S., E-mail: hannelore.mattausch@unileoben.ac.at, E-mail: stephan.laske@unileoben.ac.at; Holzer, C., E-mail: clemens.holzer@unileoben.ac.at [Chair of Polymer Processing, Department of Polymer Engineering and Science, Montanuniversitaet Leoben (Austria); Cirar, K., E-mail: kristin.cirar@unileoben.ac.at, E-mail: helmut.flachberger@unileoben.ac.at; Flachberger, H., E-mail: kristin.cirar@unileoben.ac.at, E-mail: helmut.flachberger@unileoben.ac.at [Chair of Mineral Processing, Department Mineral Resources and Petroleum Engineering , Montanuniversitaet Leoben (Austria)

    2014-05-15

    Perlite is an oversaturated, volcanic, glassy rock, which has chemically bound water from 2 to 5 wt%. Upon heating, perlite can be expanded up to 20 times of its original volume. Important applications are in the field of building industry, in refrigeration engineering or the pharmaceutical industry. As mineral filler in polymers, expanded perlite can increase the thermal conductivity, the viscosity and the mechanical properties of polypropylene composites. But there are still many challenges that must be analyzed to reach the full potential of those composites. This research work focuses on the morphology of expanded perlite/polypropylene (PP) compounds and the interactions between filler and polymer. To achieve good performance a homogenous dispersion of the filler in the polymer matrix is needed because the enhancement of the material correlates strongly with the morphology of the composite. Therefore it is necessary to characterize the microstructure of these materials in order to establish adequate structure-process-property relationships. The expanded perlite/PP composites were compounded with a co-rotating twin screw extruder Theysohn TSK 30/40D. For producing the closed cell expanded perlite a new technology, the bublon process, was used. For the material characterization two particles sizes were chosen and the filler content was varied at 5, 10 and 15 wt%. For the analysis of the effects of the screw geometry, two setups have been chosen for the processing of the materials. The produced materials were analyzed by scanning electron microscope (SEM) and tensile testing. The results show a reinforcement effect of the filler and differences in the inner structure of expanded perlite and in the morphology.

  16. Parameter estimation for an expanding universe

    Directory of Open Access Journals (Sweden)

    Jieci Wang

    2015-03-01

    Full Text Available We study the parameter estimation for excitations of Dirac fields in the expanding Robertson–Walker universe. We employ quantum metrology techniques to demonstrate the possibility for high precision estimation for the volume rate of the expanding universe. We show that the optimal precision of the estimation depends sensitively on the dimensionless mass m˜ and dimensionless momentum k˜ of the Dirac particles. The optimal precision for the ratio estimation peaks at some finite dimensionless mass m˜ and momentum k˜. We find that the precision of the estimation can be improved by choosing the probe state as an eigenvector of the hamiltonian. This occurs because the largest quantum Fisher information is obtained by performing projective measurements implemented by the projectors onto the eigenvectors of specific probe states.

  17. Microwave Energy for Expanding Perlite Ore

    Directory of Open Access Journals (Sweden)

    J.A. Aguilar-Garib

    2013-12-01

    Full Text Available Perlite is an igneous mineral composed by silicon, aluminum, oxygen and water. It can be expanded by heating it up at temperatures above 870 °C, then it becomes plastic, and the steam formed inside pressures out of the mineral. Maximum expansion is possible if the particles are heated up quickly, since the expansion degree strongly depends on the remaining water in the particles at the time that they reach the temperature where they become plastic. The typical expansion process consist in pouring the particles in rotary kilns operated with natural gas, but it is proposed in this research that the particles can be heated quickly with microwaves at 2.45 GHz. Particles of 0.08 cm and 0.018 cm of average diameter were expanded 10 to 20 times.

  18. Expanding roles for GILT in immunity

    OpenAIRE

    West, Laura Ciaccia; Cresswell, Peter

    2012-01-01

    Gamma-interferon-inducible lysosomal thiol reductase (GILT), a thioredoxin-related oxidoreductase, functions in MHC class II-restricted antigen processing and MHC class I-restricted cross-presentation by reducing disulfide bonds of endocytosed proteins and facilitating their unfolding and optimal degradation. However, recent reports have greatly expanded our understanding of GILT’s function. Several studies of GILT and antigen processing have shown that the influence of GILT on the peptide re...

  19. Japan: Implications of an Expanded Military Role,

    Science.gov (United States)

    1985-07-03

    served by diplomatic, economic and foreign assistance strategies. The Fukuda and Ohira " doctrines " emphasized the role of non-military policy in...encourage it to expand economic assistance under the comprehensive security doctrine . Weinstein is criticizing U.S. policy toward the Soviet Union; he...the United States. The second category of opinion which developed centered -~ on support for a policy line orginally set forth In the Yoshida Doctrine

  20. Deterioration of expanded polystyrene caused by Aureobasidium pullulans var. melanogenum.

    Science.gov (United States)

    Castiglia, Valeria C; Kuhar, Francisco

    2015-01-01

    An expanded-polystyrene factory located in northern Buenos Aires reported unusual dark spots causing esthetic damage in their production. A fungal strain forming black-olive colonies on extract malt agar medium was isolated from the damaged material and identified as Aureobasidium pullullans var. melanogenum. This fungus is particularly known for its capacity to produce hydrolytic enzymes and a biodegradable extracellular polysaccharide known as pullulan, which is used in the manufacture of packaging material for food and medicine. Laboratory tests were conducted to characterize its growth parameters. It was found that the organism was resistant to a wide range of pHs but did not survive at temperatures over 65°C. The proposed action plan includes drying of the material prior to packaging and disinfection of the machinery used in the manufacturing process and of the silos used for raw material storage. Copyright © 2014 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

  1. Vibrational Damping of Composite Materials

    OpenAIRE

    Biggerstaff, Janet M.

    2006-01-01

    The purpose of this research was to develop new methods of vibrational damping in polymeric composite materials along with expanding the knowledge of currently used vibrational damping methods. A new barrier layer technique that dramatically increased damping in viscoelastic damping materials that interacted with the composite resin was created. A method for testing the shear strength of damping materials cocured in composites was developed. Directional damping materials, where the loss facto...

  2. A Model of Foam Density Prediction for Expanded Perlite Composites

    Directory of Open Access Journals (Sweden)

    Arifuzzaman Md

    2015-01-01

    Full Text Available Multiple sets of variables associated with expanded perlite particle consolidation in foam manufacturing were analyzed to develop a model for predicting perlite foam density. The consolidation of perlite particles based on the flotation method and compaction involves numerous variables leading to the final perlite foam density. The variables include binder content, compaction ratio, perlite particle size, various perlite particle densities and porosities, and various volumes of perlite at different stages of process. The developed model was found to be useful not only for prediction of foam density but also for optimization between compaction ratio and binder content to achieve a desired density. Experimental verification was conducted using a range of foam densities (0.15 – 0.5 g/cm3 produced with a range of compaction ratios (1.5 – 3.5, a range of sodium silicate contents (0.05 – 0.35 g/ml in dilution, a range of expanded perlite particle sizes (1 – 4 mm, and various perlite densities (such as skeletal, material, bulk, and envelope densities. A close agreement between predictions and experimental results was found.

  3. Surprising shrinkage of expanding gels under an external load.

    Science.gov (United States)

    Kim, Seon Jeong; Spinks, Geoffrey M; Prosser, Shona; Whitten, Philip G; Wallace, Gordon G; Kim, Sun I

    2006-01-01

    Hydrogels are fascinating and useful in that they can show large volume changes in response to various stimuli, such as temperature or chemical environment. Here we report the peculiar observation that chemically crosslinked hydrogels that normally expand owing to a change in electrolyte pH can be made to shrink in certain circumstances. Specifically, these hydrogels contract when tested at a constant compressive force and subjected to a pH change that causes expansion in the absence of the applied load. When tested under tension, the gels always expand. Although the effects of external stress on the swelling of gels is known, the concomitant change in gel mechanical properties during pH switching was found to be a more dominant effect in our studies. However, existing mechanical models used to predict dimensional changes in actuator materials could not explain both the tensile and compression results. In addition, we show that the friction between metal plates of the apparatus and the gel is a key factor in explaining the contractile actuation under compressive loads. The observations reported in this paper are important for the successful design and use of hydrogel actuators in devices such as valves for microfluidics.

  4. The expanding universe of Sherlockian fandom and archival collections

    Directory of Open Access Journals (Sweden)

    Timothy Jerome Johnson

    2017-03-01

    Full Text Available Since 1887, in sometimes cosmic fashion, nearly every medium and format has been used in sharing the original 60 Sherlock Holmes adventures along with their pastiche and parodying offspring. Such creative energy is evidence of a literary big bang, and an expanding universe of creative possibilities, many of them now born digital or residing on digital platforms. We trace older and newer Sherlockian enthusiasms; their points of entry; the creative manifestations of these fandoms over time and through various media; and the emerging challenges and opportunities presented to library and archival professionals by the explosive growth of creative works, especially those produced during the last decade. Curatorial actions involving acquisition, preservation, description, and user discovery of these materials are considered alongside the relationship building necessary between curator and fan in acquiring evolving, dynamic new Sherlockian expressions and insights.

  5. Expanding Greenland’s Glacial Record

    DEFF Research Database (Denmark)

    Bjørk, Anders Anker

    Mass loss from the Greenland Ice Sheet and adjecent glaciers and ice caps has accelerated within the last decades, and these changes are accurately observed using a variety of different data products. However, the observational era is relatively short offering little insight into past dynamics....... On order to expand the glacial history of Greenland, this thesis explores physical and geological archives for evidence of the glaciers’ past response to climatic variations. Using aerial photographs, the dynamic history of the Greenland Ice Sheet is extended back to 1900 C.E. Glacier changes covering...

  6. Expanding the Bethe/Gauge dictionary

    Science.gov (United States)

    Bullimore, Mathew; Kim, Hee-Cheol; Lukowski, Tomasz

    2017-11-01

    We expand the Bethe/Gauge dictionary between the XXX Heisenberg spin chain and 2d N = (2, 2) supersymmetric gauge theories to include aspects of the algebraic Bethe ansatz. We construct the wave functions of off-shell Bethe states as orbifold defects in the A-twisted supersymmetric gauge theory and study their correlation functions. We also present an alternative description of off-shell Bethe states as boundary conditions in an effective N = 4 supersymmetric quantum mechanics. Finally, we interpret spin chain R-matrices as correlation functions of Janus interfaces for mass parameters in the supersymmetric quantum mechanics.

  7. FOAM: Expanding the horizons of climate modeling

    Energy Technology Data Exchange (ETDEWEB)

    Tobis, M.; Foster, I.T.; Schafer, C.M. [and others

    1997-10-01

    We report here on a project that expands the applicability of dynamic climate modeling to very long time scales. The Fast Ocean Atmosphere Model (FOAM) is a coupled ocean atmosphere model that incorporates physics of interest in understanding decade to century time scale variability. It addresses the high computational cost of this endeavor with a combination of improved ocean model formulation, low atmosphere resolution, and efficient coupling. It also uses message passing parallel processing techniques, allowing for the use of cost effective distributed memory platforms. The resulting model runs over 6000 times faster than real time with good fidelity, and has yielded significant results.

  8. Expanding Slayer Statutes to Elder Abuse.

    Science.gov (United States)

    Piel, Jennifer

    2015-09-01

    Common law has a dictum that people must not benefit from their crimes. In years past, states have enacted slayer rules to prevent killers from inheriting from their victims. The specific criteria and applicability of slayer rules vary by jurisdiction. Recently, several states, including Washington, have expanded their slayer rules to disqualify persons from inheriting if they have been involved in abuse or financial exploitation of the deceased. Reviewed herein are the abuse disinheritance laws, the relationship of the laws to concepts of testamentary capacity and undue influence, and the relevance to forensic psychiatric evaluations. © 2015 American Academy of Psychiatry and the Law.

  9. Use of tissue expanders in the repair of complex abdominal wall defects.

    Science.gov (United States)

    Clifton, Matthew S; Heiss, Kurt F; Keating, Jane J; Mackay, Greg; Ricketts, Richard R

    2011-02-01

    Closure of abdominal wall defects in children poses a challenge for pediatric surgeons. We describe a technique using tissue expanders placed either intraperitoneally or in the abdominal wall to aid in the reconstruction of a variety of complex abdominal wall defects. The tissue expanders are inserted under general anesthesia. Initial expansion is done in the operating room with attention to peak airway pressure, urine output, and end-tidal carbon dioxide. The expanders are inflated in the outpatient setting via percutaneous access until the calculated inflation volume is achieved. They are then removed; and definitive closure is accomplished using a combination of native tissue flaps, abdominal component separation techniques, biomaterials, and synthetic material. Six children underwent tissue expansion for treatment of abdominal wall defects (omphalocele, n = 3), trauma (n = 1), and thoracopagus twins (n = 1 pair). One to 4 expanders were used per patient, with all having a successful reconstruction of their abdominal walls. Two to 3 operations were required to restore abdominal domain and consisted of expander insertion, removal with reconstruction, and possible revision of the reconstruction. Tissue expanders possess a broad range of applications for abdominal wall reconstruction and can be used in patients of all ages. Copyright © 2011 Elsevier Inc. All rights reserved.

  10. Alkali-silica reactivity of expanded glass granules in structure of lightweight concrete

    Science.gov (United States)

    Bumanis, G.; Bajare, D.; Locs, J.; Korjakins, A.

    2013-12-01

    Main component in the lightweight concrete, which provides its properties, is aggregate. A lot of investigations on alkali silica reaction (ASR) between cement and lightweight aggregates have been done with their results published in the academic literature. Whereas expanded glass granules, which is relatively new product in the market of building materials, has not been a frequent research object. Therefore lightweight granules made from waste glass and eight types of cement with different chemical and mineralogical composition were examined in this research. Expanded glass granules used in this research is commercially available material produced by Penostek. Lightweight concrete mixtures were prepared by using commercial chemical additives to improve workability of concrete. The aim of the study is to identify effect of cement composition to the ASR reaction which occurs between expanded glass granules and binder. Expanded glass granules mechanical and physical properties were determined. In addition, properties of fresh and hardened concrete were determined. The ASR test was processed according to RILEM AAR-2 testing recommendation. Tests with scanning electron microscope and microstructural investigations were performed for expanded glass granules and hardened concrete specimens before and after exposing them in alkali solution.

  11. Distant Supernovae Indicate Ever-Expanding Universe

    Science.gov (United States)

    1998-12-01

    ESO Astronomers Contribute towards Resolution of Cosmic Puzzle Since the discovery of the expansion of the Universe by American astronomer Edwin Hubble in the 1920's, by measurement of galaxy velocities, astronomers have tried to learn how this expansion changes with time. Until now, most scientists have been considering two possibilities: the expansion rate is slowing down and will ultimately either come to a halt - whereafter the Universe would start to contract, or it will continue to expand forever. However, new studies by two independent research teams, based on observations of exploding stars ( supernovae ) by ESO astronomers [1] with astronomical telescopes at the La Silla Observatory as well as those of their colleagues at other institutions, appear to show that the expansion of the Universe is accelerating . The results take the discovery of the cosmological expansion one step further and challenge recent models of the Universe. If the new measurements are indeed correct, they show that the elusive "cosmological constant" , as proposed by Albert Einstein , contributes significantly to the evolution of the Universe. The existence of a non-zero cosmological constant implies that a repulsive force, counter-acting gravity, currently dominates the universal expansion , and consequently leads to an ever-expanding Universe. This new research is being named as the "Breakthrough of the Year" by the renowned US science journal Science in the December 18, 1998, issue. A Press Release is published by the journal on this occasion. "Fundamental Parameters" of the Universe Three fundamental parameters govern all cosmological models based on the theory of General Relativity. They are 1. the current expansion rate as described by Hubble's constant , i.e. the proportionality factor between expansion velocity and distance 2. the average matter density in the Universe, and 3. the amount of "other energy" present in space. From the measured values of these fundamental

  12. Unintended Consequences of Expanding the Genetic Alphabet.

    Science.gov (United States)

    Pollum, Marvin; Ashwood, Brennan; Jockusch, Steffen; Lam, Minh; Crespo-Hernández, Carlos E

    2016-09-14

    The base pair d5SICS·dNaM was recently reported to incorporate and replicate in the DNA of a modified strain of Escherichia coli, thus making the world's first stable semisynthetic organism. This newly expanded genetic alphabet may allow organisms to store considerably more information in order to translate proteins with unprecedented enzymatic activities. Importantly, however, there is currently no knowledge of the photochemical properties of d5SICS or dNaM-properties that are central to the chemical integrity of cellular DNA. In this contribution, it is shown that excitation of d5SICS or dNaM with near-visible light leads to efficient trapping of population in the nucleoside's excited triplet state in high yield. Photoactivation of these long-lived, reactive states is shown to photosensitize cells, leading to the generation of reactive oxygen species and to a marked decrease in cell proliferation, thus warning scientists of the potential phototoxic side effects of expanding the genetic alphabet.

  13. PCR with an expanded genetic alphabet.

    Science.gov (United States)

    Malyshev, Denis A; Seo, Young Jun; Ordoukhanian, Phillip; Romesberg, Floyd E

    2009-10-21

    Expansion of the genetic alphabet with a third base pair would lay the foundation for a semisynthetic organism with an expanded genetic code and also have immediate in vitro applications. Previously, the unnatural base pairs formed between d5SICS and either dNaM or dMMO2 were shown to be well-replicated by DNA polymerases under steady-state conditions and also transcribed by T7 RNA polymerase efficiently in either direction. We now demonstrate that DNA containing either the d5SICS-dNaM or d5SICS-dMMO2 unnatural base pair may be amplified by PCR with fidelities and efficiencies that approach those of fully natural DNA. These results further demonstrate that the determinants of a functional unnatural base pair may be designed into predominantly hydrophobic nucleobases with no structural similarity to the natural purines or pyrimidines. Importantly, the results reveal that the unnatural base pairs may function within an expanded genetic alphabet and make possible many in vitro applications.

  14. The Expanded Owens Valley Solar Array

    Science.gov (United States)

    Gary, Dale E.; Hurford, G. J.; Nita, G. M.; White, S. M.; Tun, S. D.; Fleishman, G. D.; McTiernan, J. M.

    2011-05-01

    The Expanded Owens Valley Solar Array (EOVSA) is now under construction near Big Pine, CA as a solar-dedicated microwave imaging array operating in the frequency range 1-18 GHz. The solar science to be addressed focuses on the 3D structure of the solar corona (magnetic field, temperature and density), on the sudden release of energy and subsequent particle acceleration, transport and heating, and on space weather phenomena. The project will support the scientific community by providing open data access and software tools for analysis of the data, to exploit synergies with on-going solar research in other wavelengths. The New Jersey Institute of Technology (NJIT) is expanding OVSA from its previous complement of 7 antennas to a total of 15 by adding 8 new antennas, and will reinvest in the existing infrastructure by replacing the existing control systems, signal transmission, and signal processing with modern, far more capable and reliable systems based on new technology developed for the Frequency Agile Solar Radiotelescope (FASR). The project will be completed in time to provide solar-dedicated observations during the upcoming solar maximum in 2013 and beyond. We provide an update on current status and our preparations for exploiting the data through modeling and data analysis tools. This research is supported by NSF grants AST-0908344, and AGS-0961867 and NASA grant NNX10AF27G to New Jersey Institute of Technology.

  15. Historical Notes on the Expanding Universe

    Science.gov (United States)

    Way, Michael J.; Belenkyi, Ari; Nussbaumer, Harry; Peacock, John

    2014-01-01

    The article Measuring the Hubble constant by Mario Livio and Adam Riess (Physics Today, October 2013, page 41) reviewed studies of the expanding universe from the 1920s to the present. Although the history of the subject underwent considerable compression to fit the length of a magazine article, we think it may leave a misleading impression of some of the key steps to our current understanding. We therefore offer the following clarifications. Most significantly, papers by Arthur Eddington and by Willem de Sitter in 1930, who successfully promoted Georges Lematres 1927 article for the Scientific Society of Brussels, effected a paradigm shift in interpretation of extragalactic redshifts in 1930. Before then, the astronomical community was generally unaware of the existence of nonstatic cosmological solutions and did not broadly appreciate that redshifts could be thought of locally as Doppler shifts in an expanding matter distribution. Certainly, in 1929 Edwin Hubble referred only to the de Sitter solution of 1917. At the time, the relation between distance and redshift predicted in that model was generally seen purely as a manifestation of static spacetime curvature.

  16. Familiarity expands space and contracts time.

    Science.gov (United States)

    Jafarpour, Anna; Spiers, Hugo

    2017-01-01

    When humans draw maps, or make judgments about travel-time, their responses are rarely accurate and are often systematically distorted. Distortion effects on estimating time to arrival and the scale of sketch-maps reveal the nature of mental representation of time and space. Inspired by data from rodent entorhinal grid cells, we predicted that familiarity to an environment would distort representations of the space by expanding the size of it. We also hypothesized that travel-time estimation would be distorted in the same direction as space-size, if time and space rely on the same cognitive map. We asked international students, who had lived at a college in London for 9 months, to sketch a south-up map of their college district, estimate travel-time to destinations within the area, and mark their everyday walking routes. We found that while estimates for sketched space were expanded with familiarity, estimates of the time to travel through the space were contracted with familiarity. Thus, we found dissociable responses to familiarity in representations of time and space. © 2016 The Authors Hippocampus Published by Wiley Periodicals, Inc. © 2016 The Authors Hippocampus Published by Wiley Periodicals, Inc.

  17. Expanding CEP290 mutational spectrum in ciliopathies.

    Science.gov (United States)

    Travaglini, Lorena; Brancati, Francesco; Attie-Bitach, Tania; Audollent, Sophie; Bertini, Enrico; Kaplan, Josseline; Perrault, Isabelle; Iannicelli, Miriam; Mancuso, Brunella; Rigoli, Luciana; Rozet, Jean-Michel; Swistun, Dominika; Tolentino, Jerlyn; Dallapiccola, Bruno; Gleeson, Joseph G; Valente, Enza Maria; Zankl, A; Leventer, R; Grattan-Smith, P; Janecke, A; D'Hooghe, M; Sznajer, Y; Van Coster, R; Demerleir, L; Dias, K; Moco, C; Moreira, A; Kim, C Ae; Maegawa, G; Petkovic, D; Abdel-Salam, G M H; Abdel-Aleem, A; Zaki, M S; Marti, I; Quijano-Roy, S; Sigaudy, S; de Lonlay, P; Romano, S; Touraine, R; Koenig, M; Lagier-Tourenne, C; Messer, J; Collignon, P; Wolf, N; Philippi, H; Kitsiou Tzeli, S; Halldorsson, S; Johannsdottir, J; Ludvigsson, P; Phadke, S R; Udani, V; Stuart, B; Magee, A; Lev, D; Michelson, M; Ben-Zeev, B; Fischetto, R; Benedicenti, F; Stanzial, F; Borgatti, R; Accorsi, P; Battaglia, S; Fazzi, E; Giordano, L; Pinelli, L; Boccone, L; Bigoni, S; Ferlini, A; Donati, M A; Caridi, G; Divizia, M T; Faravelli, F; Ghiggeri, G; Pessagno, A; Briguglio, M; Briuglia, S; Salpietro, C D; Tortorella, G; Adami, A; Castorina, P; Lalatta, F; Marra, G; Riva, D; Scelsa, B; Spaccini, L; Uziel, G; Del Giudice, E; Laverda, A M; Ludwig, K; Permunian, A; Suppiej, A; Signorini, S; Uggetti, C; Battini, R; Di Giacomo, M; Cilio, M R; Di Sabato, M L; Leuzzi, V; Parisi, P; Pollazzon, M; Silengo, M; De Vescovi, R; Greco, D; Romano, C; Cazzagon, M; Simonati, A; Al-Tawari, A A; Bastaki, L; Mégarbané, A; Sabolic Avramovska, V; de Jong, M M; Stromme, P; Koul, R; Rajab, A; Azam, M; Barbot, C; Martorell Sampol, L; Rodriguez, B; Pascual-Castroviejo, I; Teber, S; Anlar, B; Comu, S; Karaca, E; Kayserili, H; Yüksel, A; Akcakus, M; Al Gazali, L; Sztriha, L; Nicholl, D; Woods, C G; Bennett, C; Hurst, J; Sheridan, E; Barnicoat, A; Hennekam, R; Lees, M; Blair, E; Bernes, S; Sanchez, H; Clark, A E; DeMarco, E; Donahue, C; Sherr, E; Hahn, J; Sanger, T D; Gallager, T E; Dobyns, W B; Daugherty, C; Krishnamoorthy, K S; Sarco, D; Walsh, C A; McKanna, T; Milisa, J; Chung, W K; De Vivo, D C; Raynes, H; Schubert, R; Seward, A; Brooks, D G; Goldstein, A; Caldwell, J; Finsecke, E; Maria, B L; Holden, K; Cruse, R P; Swoboda, K J; Viskochil, D

    2009-10-01

    Ciliopathies are an expanding group of rare conditions characterized by multiorgan involvement, that are caused by mutations in genes encoding for proteins of the primary cilium or its apparatus. Among these genes, CEP290 bears an intriguing allelic spectrum, being commonly mutated in Joubert syndrome and related disorders (JSRD), Meckel syndrome (MKS), Senior-Loken syndrome and isolated Leber congenital amaurosis (LCA). Although these conditions are recessively inherited, in a subset of patients only one CEP290 mutation could be detected. To assess whether genomic rearrangements involving the CEP290 gene could represent a possible mutational mechanism in these cases, exon dosage analysis on genomic DNA was performed in two groups of CEP290 heterozygous patients, including five JSRD/MKS cases and four LCA, respectively. In one JSRD patient, we identified a large heterozygous deletion encompassing CEP290 C-terminus that resulted in marked reduction of mRNA expression. No copy number alterations were identified in the remaining probands. The present work expands the CEP290 genotypic spectrum to include multiexon deletions. Although this mechanism does not appear to be frequent, screening for genomic rearrangements should be considered in patients in whom a single CEP290 mutated allele was identified.

  18. The Expanding Marketplace for Applied Geophysics

    Science.gov (United States)

    Carlson, N.; Sirles, P.

    2012-12-01

    While the image of geophysics for the proverbial "layman" often seems limited to volcanoes and earthquakes, and to the geoscientist this image enlarges to include oil or minerals exploration and whole earth studies, there has been a steady increase in the application of geophysics into the realm of "daily life", such as real estate deals, highway infrastructure, and flood protection. This expansion of applications can be attributed to the improved economics from advances in equipment and interpretation. Traditional geophysical methods that at one time often only fit within the budgets of oil, gas, and minerals exploration programs can now be economically applied to much smaller scale needs like contaminant mapping, landfill delineation, and levee investigations. A real-world, economic example of this expanding marketplace is our company, which began very small and was aimed almost exclusively at the minerals exploration market. Most of our growth has been in the last 10 years, when we have expanded to five offices and a staff with almost 40 geoscientist degrees (21 in geophysics); much of this growth has been in the non-oil, non-minerals arenas. While much of our work still includes minerals exploration, other projects this year include wind-farm foundation studies, cavity detection above underground nuclear tests, landfill studies, acid mine drainage problems, and leaks in evaporation ponds. A methodology example of this expanding market is the induced polarization (IP) survey, once primarily used for minerals exploration, particularly large porphyry copper deposits, but now efficient enough to also use in environmental studies. The IP method has been particularly useful in delineating and characterizing old, poorly documented landfills, and recent research suggests it may also be useful in monitoring the accelerated biodegradation processes used in some cases to rehabilitate the sites. Compared to temperature monitoring systems, IP may be more useful in providing

  19. Expanded Polystyrene Re-Expansion Analysis Following Impact Compression

    Science.gov (United States)

    2015-03-04

    USAARL Report No. 2015-08 Expanded Polystyrene Re-Expansion Analysis Following Impact Compression By Mark S. Adams Frederick Brozoski Katie...13 iv This page is intentionally left blank. 1 Introduction Expanded bead polystyrene (EPS) is widely...steep rise in the stress-strain curve and little or no energy attenuation. When compressive stresses are removed, EPS foam will partially re- expand

  20. Expanding Global Mindedness through a 4-H International Village

    Science.gov (United States)

    Seal, Susan D.; Peterson, Donna J.; Iwata, Chieko; Kobia, Caroline; Reddy, Raja

    2017-01-01

    With expanding global interdependence, it is vital that 4-H youths learn more about the ever-increasing diverse cultures in their own communities as well as expand their global mindedness and understanding of globalization. The 4-H International Village (a) offers a comfortable yet engaging avenue for youths to expand their knowledge of and…

  1. 46 CFR 56.30-15 - Expanded or rolled joints.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Expanded or rolled joints. 56.30-15 Section 56.30-15... APPURTENANCES Selection and Limitations of Piping Joints § 56.30-15 Expanded or rolled joints. (a) Expanded or rolled joints may be used where experience or test has demonstrated that the joint is suitable for the...

  2. Financing Expanded Learning Time in Schools: A Look at Five District-Expanded Time Schools

    Science.gov (United States)

    Kaplan, Claire; Farbman, David A.; Deich, Sharon; Padgette, Heather Clapp

    2014-01-01

    Over the last several years, public education in the U.S. has experienced a remarkable growth in the number of schools that have expanded their schedules beyond the conventional calendar of 180 6.5-hour days. Spurred by significant policy activity at the federal, state, and local levels, more and more educators have capitalized on opportunities to…

  3. Ergodic theory of expanding thurston maps

    CERN Document Server

    Li, Zhiqiang

    2017-01-01

    Thurston maps are topological generalizations of postcritically-finite rational maps. This book provides a comprehensive study of ergodic theory of expanding Thurston maps, focusing on the measure of maximal entropy, as well as a more general class of invariant measures, called equilibrium states, and certain weak expansion properties of such maps. In particular, we present equidistribution results for iterated preimages and periodic points with respect to the unique measure of maximal entropy by investigating the number and locations of fixed points. We then use the thermodynamical formalism to establish the existence, uniqueness, and various other properties of the equilibrium state for a Holder continuous potential on the sphere equipped with a visual metric. After studying some weak expansion properties of such maps, we obtain certain large deviation principles for iterated preimages and periodic points under an additional assumption on the critical orbits of the maps. This enables us to obtain general eq...

  4. The expanding world of DNA and RNA.

    Science.gov (United States)

    Chen, Tingjian; Hongdilokkul, Narupat; Liu, Zhixia; Thirunavukarasu, Deepak; Romesberg, Floyd E

    2016-10-01

    DNA and RNA are remarkable because they can both encode information and possess desired properties, including the ability to bind specific targets or catalyze specific reactions. Nucleotide modifications that do not interfere with enzymatic synthesis are now being used to bestow DNA or RNA with properties that further increase their utility, including phosphate and sugar modifications that increase nuclease resistance, nucleobase modifications that increase the range of activities possible, and even whole nucleobase replacement that results in selective pairing and the creation of unnatural base pairs that increase the information content. These modifications are increasingly being applied both in vitro and in vivo, including in efforts to create semi-synthetic organisms with altered or expanded genetic alphabets. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Efforts to expand the genetic code.

    Science.gov (United States)

    Romesberg, Floyd E

    2005-01-01

    In an effort to develop an unnatural base pair with which to expand the genetic code we have examined a wide variety of simple phenyl rings derivatized with methyl, fluoro, or nitrogen. The small aromatic surface of these base pairs should prevent inter-strand intercalation, which is thought to inhibit the polymerase-mediated synthesis of base pairs with larger aromatic surface area. Surprisingly, despite reduced aromatic surface area and hydrogen-bonding potential, some of these base pairs are stable and synthesized with reasonable efficiency. We have also been examining the use of activity-based selection systems to evolve DNA polymerases to more efficiently recognize the unnatural substrates, and our initial successes are described.

  6. Rubella Seroprevalence Before Expanded Vaccination Program

    Directory of Open Access Journals (Sweden)

    Kenan Sener

    2007-10-01

    Full Text Available Altough rubella is usually a mild childhood disease, but when it occurs early in pregnancy are severe. In this study, seroprevalence of rubella antibodies have been invastegated in various age groups especially chilbearing age’s women before Expanded Vaccination Programme. IgM and IgG antibodies against rubella were tested by ELISA kits. Seropositivity of rubella IgG was 89,5% in chlidbearing age’s women. In Turkey, the vaccine has been on the market since 1989 but rubella vaccination is currently included in the national immunization programme. Hence, our results are important for comparison of the seroprevalence rates after national vaccination program. [TAF Prev Med Bull. 2007; 6(5: 371-374

  7. Rubella Seroprevalence Before Expanded Vaccination Program

    Directory of Open Access Journals (Sweden)

    Kenan Sener

    2007-10-01

    Full Text Available Altough rubella is usually a mild childhood disease, but when it occurs early in pregnancy are severe. In this study, seroprevalence of rubella antibodies have been invastegated in various age groups especially chilbearing age’s women before Expanded Vaccination Programme. IgM and IgG antibodies against rubella were tested by ELISA kits. Seropositivity of rubella IgG was 89,5% in chlidbearing age’s women. In Turkey, the vaccine has been on the market since 1989 but rubella vaccination is currently included in the national immunization programme. Hence, our results are important for comparison of the seroprevalence rates after national vaccination program. [TAF Prev Med Bull 2007; 6(5.000: 371-374

  8. Neuroimmunology: an expanding frontier in autoimmunity

    Directory of Open Access Journals (Sweden)

    Romana eHöftberger

    2015-04-01

    Full Text Available Anti-neuronal autoimmune encephalitis (AIE comprises a recently characterized group of immune-mediated disorders that result in limbic, multifocal, or diffuse encephalitis due to direct interaction of autoantibodies with neuronal surface or synaptic proteins. The pathological effects of the autoantibodies vary according to the target antigen but when they are removed neuronal dysfunction is commonly reversed. Ongoing research on AIE constantly increases the number of novel autoantibodies and expands the spectrum of neurological syndromes that are important in the differential diagnosis of psychiatric illness, dementia, or viral encephalitis. This review summarizes recent advances in AIE, focusing on pathogenetic mechanisms and novel associations with other CNS disorders such as neurodegeneration, relapsing symptoms post-herpes simplex virus encephalitis, and demyelinating diseases. In addition, an algorithmic approach to detect and characterize neuronal cell surface autoantibodies is proposed.

  9. Expanding Technological Frames Towards Mediated Collaboration

    DEFF Research Database (Denmark)

    Bjørn, Pernille; Scupola, Ada; Fitzgerald, Brian

    2006-01-01

    of their work practices and use of technology. Finally the third step includes participants' commitment and practical enactment of groupware. One of the key findings is that in groupware adoption the alignment of the individual technological frames requires articulation and re-evaluation of experienced......This paper provides an in-depth analysis of technological and social factors leading to the successful adoption of groupware in a virtual team in educational setting. Drawing on a theoretical framework based on the concept of technological frames, we conducted an action research study to analyze...... the chronological sequence of events leading to groupware adoption. We argue that groupware adoption can be conceptualized as a three-step process of expanding and aligning individual technological frames towards groupware: The first step comprises activities facilitating participants in articulation and evaluation...

  10. Web Content Analysis: Expanding the Paradigm

    Science.gov (United States)

    Herring, Susan C.

    Are established methods of content analysis (CA) adequate to analyze web content, or should new methods be devised to address new technological developments? This article addresses this question by contrasting narrow and broad interpretations of the concept of web content analysis. The utility of a broad interpretation that subsumes the narrow one is then illustrated with reference to research on weblogs (blogs), a popular web format in which features of HTML documents and interactive computer-mediated communication converge. The article concludes by proposing an expanded Web Content Analysis (WebCA) paradigm in which insights from paradigms such as discourse analysis and social network analysis are operationalized and implemented within a general content analytic framework.

  11. The law's interface with expanding technology

    Science.gov (United States)

    Green, H. P.

    1972-01-01

    The role of the law in technology assessment is described in generalized terms of a legal system as it confronts expanding technology. The functions of a technology assessment are considered to be twofold; provide for legislative action designed to channel technological advance along lines which are regarded as optimal from the standpoint of society's interests; and encourage and promote legislative action which will deal decisively with the potential disruptions and injuries caused by technology at a much earlier stage of the growth of the technology than is feasible under the present legal system. It is concluded that since new law always has a disruptive effect on expectations and commitments arrived at under old law, it is generally desirable that new legislation should make the least possible change in the law consistant with accomplishing the desired objective.

  12. Particles formation in an expanding plasma

    Energy Technology Data Exchange (ETDEWEB)

    Lescoute, E.; Hallo, L.; Chimier, B.; Tikhonchuk, V.T.; Stenz, C. [Bordeaux-1 Univ., CELIA, CNRS-CEA, 33 - Talence (France); Hebert, D.; Chevalier, J.M.; Rullier, J.L.; Palmier, S. [CEA Centre d' Etudes Scientifiques et Techniques d' Aquitaine, 33 - Le Barp (France)

    2009-08-15

    Interaction of a laser beam with a target generates a high velocity expanding plasma plume, solid debris and liquid nano- and micro-particles. They are produced from plasma recombination and vapor condensation and can be deposited on optical elements located nearby the target. Two distinct kinds of particles were observed depending on the temperature achieved in the plasma plume: large micrometer-size fragments for temperatures lower than the critical temperature, and very small nanometer-size particles for higher temperatures. The paper presents experimental observations of fragments and nano-particles in plasma plumes and a comparison with models. A good agreement has been found for nano-particle sizes and distributions. This simple modeling can also be used for nuclei production in the nanosecond time scale. Our estimates show that particle size can be correlated to laser wavelength and fluences.

  13. Expanding forensic science through forensic intelligence.

    Science.gov (United States)

    Ribaux, Olivier; Talbot Wright, Benjamin

    2014-12-01

    Research and Development ('R&D') in forensic science currently focuses on innovative technologies improving the efficiency of existing forensic processes, from the detection of marks and traces at the scene, to their presentation in Court. R&D approached from this perspective provides no response to doubts raised by recent criminological studies, which question the effective contribution of forensic science to crime reduction, and to policing in general. Traces (i.e. forensic case data), as remnants of criminal activity are collected and used in various forms of crime monitoring and investigation. The aforementioned doubts therefore need to be addressed by expressing how information is conveyed by traces in these processes. Modelling from this standpoint expands the scope of forensic science and provides new R&D opportunities. Twelve propositions for R&D are stated in order to pave the way. Copyright © 2014 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

  14. Expanding the applicability of Heallth Technology Assessments

    DEFF Research Database (Denmark)

    Draborg, Eva; Hansen, Helle Ploug

    2012-01-01

    The objective of the presentation is to expand the foundations of input into policy decision making relying on health technology assessments (HTA). HTAs are primarily based on systematic reviews (SR) and thereby mostly on randomized controlled trials (RCT). RCTs can be distinguished on a continuum......-oriented perspective and aims at supporting health policy makers and therefore have to reflect policy applicable questions and answers. Simply relying on strictly controlled explanatory RCTs alone is too narrow to answer questions of relevance for policy making. It is suggested to supplement these highly controlled...... between explanatory and pragmatic trials according to their level of control over variables in the study besides the examined technology. In explanatory trials emphasis are placed on internal validity in order to test the efficacy of a technology under ideal conditions while pragmatic trials emphasizes...

  15. Expanding Policy Imagination in Political Economy

    DEFF Research Database (Denmark)

    Seabrooke, Leonard

    2006-01-01

    Much of the literature in political economy seeks to capture an essential insight into the evolution of political and economic systems to provide a foundation for policy advice. This article suggests that attempts to nut out the kernels of change often restrict rather than expand policy imagination...... be implemented. Historical sociology provides a way to generate information about contextual constellations through two "tonics": intentional rationality and social mechanisms. With the assistance of these tonics, historical sociology widens political economy's policy imagination........ Three "fevers" are identified as involved in the narrowing of policy imagination and two "tonics" are offered to widen it. The three fevers are: 1. viewing the present as natural; 2. seeing history as overtly path dependent; and 3. viewing history as driven by "Great Men". These fevers limit our...

  16. Expanded uncertainty regions for complex quantities

    Science.gov (United States)

    Hall, B. D.

    2013-10-01

    The expanded measurement uncertainty of a complex quantity is a region in the complex plane surrounding the measured value. This paper considers different shaped uncertainty regions in the form of ellipses, circles, rectangles and parallelograms. The different types of region are compared, under a variety of measurement error conditions, with regard to coverage probability and relative area. Elliptical confidence regions are commonly used in multivariate statistics. However, this shape has not been adopted widely in metrology, perhaps because there is no simple way to report the extent of an elliptical region. The other shapes considered are easier to use. Unfortunately, the coverage probability of circular uncertainty regions is found to be sensitive to both the form of the distribution of measurement errors and to the number of degrees of freedom, making this shape a poor choice. Parallelograms and rectangles both performed well, with parallelograms giving the best results overall.

  17. Transcription of an expanded genetic alphabet.

    Science.gov (United States)

    Seo, Young Jun; Matsuda, Shigeo; Romesberg, Floyd E

    2009-04-15

    Expansion of the genetic alphabet with a third base pair would have immediate biotechnology applications and also lay the foundation for a semisynthetic organism with an expanded genetic code. A variety of unnatural base pairs have been shown to be formed efficiently and selectively during DNA replication, and the pairs formed between the unnatural nucleotide d5SICS and either dMMO2 or dNaM are particularly interesting because they have been shown to be replicated with efficiencies and fidelities that are beginning to approach those of a natural base pair. Not only are these unnatural base pairs promising for different applications, but they also demonstrate that nucleobase shape and hydrophobicity are sufficient to control replication. While a variety of unnatural base pairs have been shown to be substrates for transcription, none are transcribed in both possible strand contexts, and the transcription of a fully hydrophobic base pair has not been demonstrated. We show here that both of the unnatural base pairs d5SICS:dMMO2 and d5SICS:dNaM are selectively transcribed by T7 RNA polymerase and that the efficiency of d5SICS:dNaM transcription in both possible strand contexts is only marginally reduced relative to that of a natural base pair. Thus, as with replication, we find that hydrogen-bonding is not essential for transcription and may be replaced with packing and hydrophobic forces. The results also demonstrate that d5SICS:dNaM is both replicated and transcribed with efficiencies and fidelities that should be sufficient for use as part of an in vitro expanded genetic alphabet.

  18. Roots Air Management System with Integrated Expander

    Energy Technology Data Exchange (ETDEWEB)

    Stretch, Dale [Eaton Corporation, Menomonee Falls, WI (United States); Wright, Brad [Eaton Corporation, Menomonee Falls, WI (United States); Fortini, Matt [Eaton Corporation, Menomonee Falls, WI (United States); Fink, Neal [Ballard Power Systems, Burnaby, BC (Canada); Ramadan, Bassem [Kettering Univ., Flint, MI (United States); Eybergen, William [Eaton Corporation, Menomonee Falls, WI (United States)

    2016-07-06

    PEM fuel cells remain an emerging technology in the vehicle market with several cost and reliability challenges that must be overcome in order to increase market penetration and acceptance. The DOE has identified the lack of a cost effective, reliable, and efficient air supply system that meets the operational requirements of a pressurized PEM 80kW fuel cell as one of the major technological barriers that must be overcome. This project leveraged Roots positive displacement development advancements and demonstrated an efficient and low cost fuel cell air management system. Eaton built upon its P-Series Roots positive displacement design and shifted the peak efficiency making it ideal for use on an 80kW PEM stack. Advantages to this solution include: • Lower speed of the Roots device eliminates complex air bearings present on other systems. • Broad efficiency map of Roots based systems provides an overall higher drive cycle fuel economy. • Core Roots technology has been developed and validated for other transportation applications. Eaton modified their novel R340 Twin Vortices Series (TVS) Roots-type supercharger for this application. The TVS delivers more power and better fuel economy in a smaller package as compared to other supercharger technologies. By properly matching the helix angle with the rotor’s physical aspect ratio, the supercharger’s peak efficiency can be moved to the operating range where it is most beneficial for the application. The compressor was designed to meet the 90 g/s flow at a pressure ratio of 2.5, similar in design to the P-Series 340. A net shape plastic expander housing with integrated motor and compressor was developed to significantly reduce the cost of the system. This integrated design reduced part count by incorporating an overhung expander and motor rotors into the design such that only four bearings and two shafts were utilized.

  19. Prediction of fragmentation of an aluminum expanding ring

    Science.gov (United States)

    Ruggiero, Andrew; Bonora, Nicola; Gentile, Domenico; Iannitti, Gianluca; Testa, Gabriel; di Stefano, Roberto

    2017-06-01

    The fragmentation behavior of solid is important in a wide range of industrial and military applications. After Niordson, the electromagnetically launched expanding ring proved a useful technique for investigating tensile fracture and fragmentation at high strain rate and the method was largely exploited by many authors. Recently, Zhang and Ravi-Chandar reported the details of the experimental observations on Al 6061-O. In the present work, two approaches were used for predicting the fragmentation response in these tests. The first is an energy based fragmentation model derived from the Grady's theory. The method, already applied to cold drawn pure copper, adopts the dynamic crack tip opening displacement as the fracture parameter that allows accounting for plastic strain occurring prior fracture. The second is a Continuum Damage Mechanics approach. Numerical simulations of the rings expansion were performed through finite element method taking care to apply proper boundary conditions. The Lorentz force was calculated by imposing the measured currents and providing the inductances values as a function of the ring geometry. To predict the material failure, the Bonora's damage model was applied, considering a statistical variation of material parameters within the rings volume.

  20. Lasers in materials science

    CERN Document Server

    Ossi, Paolo; Zhigilei, Leonid

    2014-01-01

    This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems.  The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications.  Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers...

  1. Production of durable expanded perlite microspheres in a Vertical Electrical Furnace

    Science.gov (United States)

    Panagiotis, M.; Angelopoulos, P.; Taxiarchou, M.; Paspaliaris, I.

    2016-04-01

    Expanded perlite constitutes one of the most competitive insulating materials that is widely used in construction and manufacturing industry due to its unique properties combination; it is white, natural, lightweight, chemically inert, and exhibits superior insulating properties (thermal and acoustic) and fire resistance. Conventionally, perlite expansion is performed in vertical gas-fired furnaces; the conventional perlite expansion process has certain disadvantages which affect expanded products quality, thus limiting their performance and range of applications. In order to overcome the drawbacks of the conventional expansion technique, a new perlite expansion process has been designed based on a vertical electrical furnace (VEF). In the current study, fine perlite samples (-150 μm) from Milos Island, Greece, were expansed in the novel VEF and a conventional gas-fired furnace with the aim to evaluate and compare the main physical properties of the expanded products. The novel expanded perlite particles were characterised by superior properties, namely increased compression strength, competitive water and oil absorption capability, size homogeneity, spherical shape and decreased surface porosity in comparison to conventionally expanded samples.

  2. Expanding the genetic heterogeneity of intellectual disability

    KAUST Repository

    Anazi, Shams

    2017-09-22

    Intellectual disability (ID) is a common morbid condition with a wide range of etiologies. The list of monogenic forms of ID has increased rapidly in recent years thanks to the implementation of genomic sequencing techniques. In this study, we describe the phenotypic and genetic findings of 68 families (105 patients) all with novel ID-related variants. In addition to established ID genes, including ones for which we describe unusual mutational mechanism, some of these variants represent the first confirmatory disease-gene links following previous reports (TRAK1, GTF3C3, SPTBN4 and NKX6-2), some of which were based on single families. Furthermore, we describe novel variants in 14 genes that we propose as novel candidates (ANKHD1, ASTN2, ATP13A1, FMO4, MADD, MFSD11, NCKAP1, NFASC, PCDHGA10, PPP1R21, SLC12A2, SLK, STK32C and ZFAT). We highlight MADD and PCDHGA10 as particularly compelling candidates in which we identified biallelic likely deleterious variants in two independent ID families each. We also highlight NCKAP1 as another compelling candidate in a large family with autosomal dominant mild intellectual disability that fully segregates with a heterozygous truncating variant. The candidacy of NCKAP1 is further supported by its biological function, and our demonstration of relevant expression in human brain. Our study expands the locus and allelic heterogeneity of ID and demonstrates the power of positional mapping to reveal unusual mutational mechanisms.

  3. Expanded polylactide bead foaming - A new technology

    Science.gov (United States)

    Nofar, M.; Ameli, A.; Park, C. B.

    2015-05-01

    Bead foaming technology with double crystal melting peak structure has been recognized as a promising method to produce low-density foams with complex geometries. During the molding stage of the bead foams, the double peak structure generates a strong bead-to-bead sintering and maintains the overall foam structure. During recent years, polylactide (PLA) bead foaming has been of the great interest of researchers due to its origin from renewable resources and biodegradability. However, due to the PLA's low melt strength and slow crystallization kinetics, the attempts have been limited to the manufacturing methods used for expanded polystyrene. In this study, for the first time, we developed microcellular PLA bead foams with double crystal melting peak structure. Microcellular PLA bead foams were produced with expansion ratios and average cell sizes ranging from 3 to 30-times and 350 nm to 15 µm, respectively. The generated high melting temperature crystals during the saturation significantly affected the expansion ratio and cell density of the PLA bead foams by enhancing the PLA's poor melt strength and promoting heterogeneous cell nucleation around the crystals.

  4. Filtration application from recycled expanded polystyrene.

    Science.gov (United States)

    Shin, C

    2006-10-01

    Water-in-oil emulsion with drop size less than 100 mum is difficult to separate. Coalescence filtration is economical and effective for separation of secondary dispersions. Coalescence performance depends on flow rate, bed depth, fiber surface properties, and drop size. The amount of surface area of the fibers directly affects the efficiency. A new recycling method was investigated in the previous work in which polystyrene (PS) sub-mum fibers were electro-spun from recycled expanded polystyrene (EPS). These fibers are mixed with micro glass fibers to modify the glass fiber filter media. The filter media are tested in the separation of water droplets from an emulsion of water droplets in oil. The experimental results in this work show that adding nanofibers to conventional micron sized fibrous filter media improves the separation efficiency of the filter media but also increases the pressure drop. An optimum in the performance occurs (significant increase in efficiency with minimal increase in pressure drop) with the addition of about 4% by mass of 500 nm diameter PS nanofibers to glass fibers for the filters.

  5. Germany's expanding role in global health.

    Science.gov (United States)

    Kickbusch, Ilona; Franz, Christian; Holzscheiter, Anna; Hunger, Iris; Jahn, Albrecht; Köhler, Carsten; Razum, Oliver; Schmidt, Jean-Olivier

    2017-08-26

    Germany has become a visible actor in global health in the past 10 years. In this Series paper, we describe how this development complements a broad change in perspective in German foreign policy. Catalysts for this shift have been strong governmental leadership, opportunities through G7 and G20 presidencies, and Germany's involvement in managing the Ebola virus disease outbreak. German global health engagement has four main characteristics that are congruent with the health agenda of the Sustainable Development Goals; it is rooted in human rights, multilateralism, the Bismarck model of social protection, and a link between development and investment on the basis of its own development trajectory after World War 2. The combination of momentum and specific characteristics makes Germany well equipped to become a leader in global health, yet the country needs to accept additional financial responsibility for global health, expand its domestic global health competencies, reduce fragmentation of global health policy making, and solve major incoherencies in its policies both nationally and internationally. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. The expanding universe of prion diseases.

    Directory of Open Access Journals (Sweden)

    Joel C Watts

    2006-03-01

    Full Text Available Prions cause fatal and transmissible neurodegenerative disease. These etiological infectious agents are formed in greater part from a misfolded cell-surface protein called PrP(C. Several mammalian species are affected by the diseases, and in the case of "mad cow disease" (BSE the agent has a tropism for humans, with negative consequences for agribusiness and public health. Unfortunately, the known universe of prion diseases is expanding. At least four novel prion diseases--including human diseases variant Creutzfeldt-Jakob disease (vCJD and sporadic fatal insomnia (sFI, bovine amyloidotic spongiform encephalopathy (BASE, and Nor98 of sheep--have been identified in the last ten years, and chronic wasting disease (CWD of North American deer (Odocoileus Specis and Rocky Mountain elk (Cervus elaphus nelsoni is undergoing a dramatic spread across North America. While amplification (BSE and dissemination (CWD, commercial sourcing of cervids from the wild and movement of farmed elk can be attributed to human activity, the origins of emergent prion diseases cannot always be laid at the door of humankind. Instead, the continued appearance of new outbreaks in the form of "sporadic" disease may be an inevitable outcome in a situation where the replicating pathogen is host-encoded.

  7. The expanding universe of prion diseases.

    Directory of Open Access Journals (Sweden)

    2006-03-01

    Full Text Available Prions cause fatal and transmissible neurodegenerative disease. These etiological infectious agents are formed in greater part from a misfolded cell-surface protein called PrP(C. Several mammalian species are affected by the diseases, and in the case of "mad cow disease" (BSE the agent has a tropism for humans, with negative consequences for agribusiness and public health. Unfortunately, the known universe of prion diseases is expanding. At least four novel prion diseases-including human diseases variant Creutzfeldt-Jakob disease (vCJD and sporadic fatal insomnia (sFI, bovine amyloidotic spongiform encephalopathy (BASE, and Nor98 of sheep-have been identified in the last ten years, and chronic wasting disease (CWD of North American deer (Odocoileus Specis and Rocky Mountain elk (Cervus elaphus nelsoni is undergoing a dramatic spread across North America. While amplification (BSE and dissemination (CWD, commercial sourcing of cervids from the wild and movement of farmed elk can be attributed to human activity, the origins of emergent prion diseases cannot always be laid at the door of humankind. Instead, the continued appearance of new outbreaks in the form of "sporadic" disease may be an inevitable outcome in a situation where the replicating pathogen is host-encoded.

  8. Expanding the genetic heterogeneity of intellectual disability.

    Science.gov (United States)

    Anazi, Shams; Maddirevula, Sateesh; Salpietro, Vincenzo; Asi, Yasmine T; Alsahli, Saud; Alhashem, Amal; Shamseldin, Hanan E; AlZahrani, Fatema; Patel, Nisha; Ibrahim, Niema; Abdulwahab, Firdous M; Hashem, Mais; Alhashmi, Nadia; Al Murshedi, Fathiya; Al Kindy, Adila; Alshaer, Ahmad; Rumayyan, Ahmed; Al Tala, Saeed; Kurdi, Wesam; Alsaman, Abdulaziz; Alasmari, Ali; Banu, Selina; Sultan, Tipu; Saleh, Mohammed M; Alkuraya, Hisham; Salih, Mustafa A; Aldhalaan, Hesham; Ben-Omran, Tawfeg; Al Musafri, Fatima; Ali, Rehab; Suleiman, Jehan; Tabarki, Brahim; El-Hattab, Ayman W; Bupp, Caleb; Alfadhel, Majid; Al Tassan, Nada; Monies, Dorota; Arold, Stefan T; Abouelhoda, Mohamed; Lashley, Tammaryn; Houlden, Henry; Faqeih, Eissa; Alkuraya, Fowzan S

    2017-11-01

    Intellectual disability (ID) is a common morbid condition with a wide range of etiologies. The list of monogenic forms of ID has increased rapidly in recent years thanks to the implementation of genomic sequencing techniques. In this study, we describe the phenotypic and genetic findings of 68 families (105 patients) all with novel ID-related variants. In addition to established ID genes, including ones for which we describe unusual mutational mechanism, some of these variants represent the first confirmatory disease-gene links following previous reports (TRAK1, GTF3C3, SPTBN4 and NKX6-2), some of which were based on single families. Furthermore, we describe novel variants in 14 genes that we propose as novel candidates (ANKHD1, ASTN2, ATP13A1, FMO4, MADD, MFSD11, NCKAP1, NFASC, PCDHGA10, PPP1R21, SLC12A2, SLK, STK32C and ZFAT). We highlight MADD and PCDHGA10 as particularly compelling candidates in which we identified biallelic likely deleterious variants in two independent ID families each. We also highlight NCKAP1 as another compelling candidate in a large family with autosomal dominant mild intellectual disability that fully segregates with a heterozygous truncating variant. The candidacy of NCKAP1 is further supported by its biological function, and our demonstration of relevant expression in human brain. Our study expands the locus and allelic heterogeneity of ID and demonstrates the power of positional mapping to reveal unusual mutational mechanisms.

  9. Phase-coded pulse expander-compressor

    Science.gov (United States)

    Lewis, B. L.

    1985-04-01

    A pulse expansion and compression system, especially useful for radar ranging, comprising a pulse coder for expanding an input pulse and a pulse compressor of the matched-filter type. The coder consists of a plurality of delay stages into which the input pulse is fed, a discrete Fourier transform (DFT) circuit to which the output signals of the delay stages are fed by way of respective phase weights and for which every other frequency port is inverted prior to entry to a time-dispersion-means (TDM) comprising an arrangement of adders interconnected by delay stages for differently delaying the output signals from the DFT. The adders are connected in N/2-fold cyclically permutated order to the frequency ports, where N is the number of frequency ports if that number is even, and N is the number of frequency ports less one if that number is odd. The TDM output is fed to a phase modulator and then to the transmitter. The echo signals are conjugated, time-inverted, and passed through the same DFT as the input pulse signal by way of the phase weights. The outputs of the DFT are then inverted at every other frequency port and passed through the TDM, but this time in time-inverted order. The outputs of the TDM are fed through an envelope detector to provide a cross-correlated facsimile of the original input pulse.

  10. P2 polyphase code expander-compressor

    Science.gov (United States)

    Kretschmer, F. F.

    1985-06-01

    A pulse expansion and compression system, especially useful for radar ranging, comprising a pulse coder for expanding an input pulse and a pulse compressor of the matched-filter type. The coder consists of a plurality of delay stages into which the input pulse is fed, a discrete Fourier transform (DFT) circuit to which the output signals of the delay stages are fed by way of respective phase weights and for which every frequency port is phase-shifted prior to entry to a time-dispersion-means (TDM) comprising an arrangement of delay stages for differently delaying the output signals from the DFT. The TDM output is fed to a phase modulator and then to the transmitter. The echo signals are conjugated, time-inverted, and passed through the same DFT as the input pulse signal by way of the phase weights. The outputs of the DFT are then phase-shifted at every frequency port and passed through the TDM, but this time in time-inverted order. The outputs of the TDM are fed through an envelope detector to provide a cross-correlated facsimile of the original input pulse.

  11. P1 polyphase code expander-compressor

    Science.gov (United States)

    Kretschmer, F. F.

    1985-04-01

    A pulse expansion and compression system, especially useful for radar ranging, comprising a pulse coder for expanding and input pulse and a pulse compressor of the matched-filter type. The coder consists of a plurality of delay stages into which the input pulse is fed, a discrete Fourier transform (DFT) circuit to which the output signals of the delay stages are fed by way of respective phase weights and for which every other frequency port is inverted prior to entry to a time-dispersion-means (TDM) comprising an arrangement of adders interconnected by delay stages for differently delaying the output signals from the DFT. The TDM output is fed to a phase modulator and then to the transmitter. The echo signals are conjugated, time-inverted, and passed through the same DFT as the input pulse signal by way of the phase weights. The outputs of the DFT are then inverted at every other frequency port and passed through the TDM, but this tme in time-inverted order. The outputs of the TDM are fed through an envelope detector to provide a cross-correlated facsimile of the original input pulse.

  12. Phase coded pulse expander-compressor

    Science.gov (United States)

    Lewis, B. L.

    1985-06-01

    A pulse expansion and compression system, especially useful for radar ranging, comprising a pulse coder for expanding an input pulse and a pulse compressor of the matched-filter type. The coder consists of a plurality of delay stages into which the input pulse is fed, a discrete Fourier transform (DFT) circuit to which the output signals of the delay stages are fed by way of respective phase weights and for which every other frequency port is inverted prior to entry to a time-dispersion means (TDM) comprising an arrangement of adders interconnected by delay stages for differently delaying the output signals from the DFT. The TDM output is fed to a phase modulator and then to the transmitter. The echo signals are conjugated, time-inverted, and passed through the same DFT as the input pulse signal by way of the phase weights. The outputs of the DFT are then inverted at every other frequency port and passed through the TDM, but this time in time-inverted order. The outputs of the TDM are fed through an envelope detector to provide a cross-correlated facsimile of the original input pulse.

  13. Expanding the role of internal facility assessments

    Energy Technology Data Exchange (ETDEWEB)

    Kolpa, R.L.; Levenson, J.B. [Argonne National Lab., IL (United States); Weaver, M.A. [Headquarters Air Force Materiel Command, Wright-Patterson AFB, OH (United States)

    1996-05-01

    The US Air Force (USAF) Environmental Compliance Assessment and Management Program (ECAMP) is an effective and comprehensive system to evaluate environmental compliance at individual USAF installations. The ECAMP assessment is typically performed by a team of experts from the installation`s Major Command (MAJCOM) Headquarters, and is often augmented with technical contractor support. As directed by Air Force policy, an external ECAMP assessment is required at a minimum of every three years for each installation. In the intervening years, each installation is required to perform an internal ECAMP assessment, with its own personnel and resources. Even though team composition differs, the internal and external ECAMP assessments are likely to be very similar in scope, objectives, and deliverables. For over nine years, Argonne National Laboratory (ANL) has supported several Air Force MAJCOMs in performing their external ECAMP assessments. More recently, ANL has also had the opportunity to provide technical support and training at individual installations during their preparation and conduct of internal ECAMP assessments. From that experience, the authors have learned that the quality and value of the internal assessment is enhanced by making it a vehicle for training, planning, and interaction among organizations. Various strategies and techniques have been successfully employed to derive maximum benefit and insight from the internal assessment process. Experiences that involve expanding the scope and objectives of internal assessments to meet specific goals are presented. The expansion of scope and objectives include preassessment training, planning, and evaluator interactions as part of the overall internal assessment process.

  14. Helical Screw Expander Evaluation Project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    McKay, R.

    1982-03-01

    A functional 1-MW geothermal electric power plant that featured a helical screw expander was produced and then tested in Utah in 1978 to 1979 with a demonstrated average performance of approximately 45% machine efficiency over a wide range of test conditions in noncondensing operation on two-phase geothermal fluids. The Project also produced a computer-equipped data system, an instrumentation and control van, and a 1000-kW variable load bank, all integrated into a test array designed for operation at a variety of remote test sites. Additional testing was performed in Mexico in 1980 under a cooperative test program using the same test array, and machine efficiency was measured at 62% maximum with the rotors partially coated with scale, compared with approximately 54% maximum in Utah with uncoated rotors, confirming the importance of scale deposits within the machine on performance. Data are presented for the Utah testing and for the noncondensing phases of the testing in Mexico. Test time logged was 437 hours during the Utah tests and 1101 hours during the Mexico tests.

  15. The determination of chlorofluorocarbons and extractives in the expanded and disposable polystyrene ware.

    Science.gov (United States)

    Sam, C T; Chua, T H

    1991-10-01

    Residual chlorofluorocarbons (CFCs) and water-extractive residues in expanded polystyrene ware were determined because of the threat to environmental and public health arising from the ozone depleting potential of CFCs and the leaching of toxic monomers and oligomers into food and drink. Chlorofluorocarbon in expanded polystyrene ware was analysed using headspace gas chromatography in the flame ionization mode, and confirmed by gas chromatography-mass spectrometry. The amount of extractive residue leached from this type of polymeric material was determined using an aqueous medium simulating categories of food and beverages. A wide range of concentrations of CFC-12 (dichlorodifluorocarbon) was detected in the styrofoam ware. It fluctuated between a low of 32 ppm and a high of 35471 ppm in two different samples of styrofoam plates. Similarly, the highest and lowest levels of extractive residue detected in two different styrofoam plates were 54 ppm and 0.5 ppm respectively. CFC-22 or HCFC (chlorodifluorocarbon) was absent from these expanded polystyrene ware. The continued use of chlorofluorocarbons as a blowing agent will further exert a deleterious effect on the stratospheric ozone layer. Though the level of water extractive residue from these expanded polystyrene ware was relatively safe, public health could be further safe-guarded through improvmeents in raw material selection and mode of production.

  16. Using Figurative Language to Expand Students' Vocabulary.

    Science.gov (United States)

    Lazar, Gillian

    1996-01-01

    Examines definitions and suggests examples of types of figurative language to which students may usefully be exposed in the course of their learning. The article discusses implications for the teaching of figurative language and presents sample materials representing different strategies for helping students understand and generate figurative…

  17. Flexible PVC flame retarded with expandable graphite

    CSIR Research Space (South Africa)

    Focke, WW

    2014-02-01

    Full Text Available furnace. Milled natural Zimbabwean flake graphite (Graphite) was supplied by BEP Bestobell (South Africa) and used as a reference material. TPC Paste Resin Co., Ltd. supplied the poly(vinyl chloride) emulsion grade PG680. It was a free flowing powder...

  18. Expanding on Successful Concepts, Models, and Organization

    Energy Technology Data Exchange (ETDEWEB)

    Teeguarden, Justin G.; Tan, Yu-Mei; Edwards, Stephen W.; Leonard, Jeremy A.; Anderson, Kim A.; Corley, Richard A.; Kile, Molly L.; L. Massey Simonich, Staci; Stone, David; Tanguay, Robert L.; Waters, Katrina M.; Harper, Stacey L.; Williams, David E.

    2016-09-06

    In her letter to the editor1 regarding our recent Feature Article “Completing the Link between Exposure Science and Toxicology for Improved Environmental Health Decision Making: The Aggregate Exposure Pathway Framework” 2, Dr. von Göetz expressed several concerns about terminology, and the perception that we propose the replacement of successful approaches and models for exposure assessment with a concept. We are glad to have the opportunity to address these issues here. If the goal of the AEP framework was to replace existing exposure models or databases for organizing exposure data with a concept, we would share Dr. von Göetz concerns. Instead, the outcome we promote is broader use of an organizational framework for exposure science. The framework would support improved generation, organization, and interpretation of data as well as modeling and prediction, not replacement of models. The field of toxicology has seen the benefits of wide use of one or more organizational frameworks (e.g., mode and mechanism of action, adverse outcome pathway). These frameworks influence how experiments are designed, data are collected, curated, stored and interpreted and ultimately how data are used in risk assessment. Exposure science is poised to similarly benefit from broader use of a parallel organizational framework, which Dr. von Göetz correctly points out, is currently used in the exposure modeling community. In our view, the concepts used so effectively in the exposure modeling community, expanded upon in the AEP framework, could see wider adoption by the field as a whole. The value of such a framework was recognized by the National Academy of Sciences.3 Replacement of models, databases, or any application with the AEP framework was not proposed in our article. The positive role broader more consistent use of such a framework might have in enabling and advancing “general activities such as data acquisition, organization…,” and exposure modeling was discussed

  19. Expanding the boundaries of local similarity analysis.

    Science.gov (United States)

    Durno, W Evan; Hanson, Niels W; Konwar, Kishori M; Hallam, Steven J

    2013-01-01

    Pairwise comparison of time series data for both local and time-lagged relationships is a computationally challenging problem relevant to many fields of inquiry. The Local Similarity Analysis (LSA) statistic identifies the existence of local and lagged relationships, but determining significance through a p-value has been algorithmically cumbersome due to an intensive permutation test, shuffling rows and columns and repeatedly calculating the statistic. Furthermore, this p-value is calculated with the assumption of normality -- a statistical luxury dissociated from most real world datasets. To improve the performance of LSA on big datasets, an asymptotic upper bound on the p-value calculation was derived without the assumption of normality. This change in the bound calculation markedly improved computational speed from O(pm²n) to O(m²n), where p is the number of permutations in a permutation test, m is the number of time series, and n is the length of each time series. The bounding process is implemented as a computationally efficient software package, FASTLSA, written in C and optimized for threading on multi-core computers, improving its practical computation time. We computationally compare our approach to previous implementations of LSA, demonstrate broad applicability by analyzing time series data from public health, microbial ecology, and social media, and visualize resulting networks using the Cytoscape software. The FASTLSA software package expands the boundaries of LSA allowing analysis on datasets with millions of co-varying time series. Mapping metadata onto force-directed graphs derived from FASTLSA allows investigators to view correlated cliques and explore previously unrecognized network relationships. The software is freely available for download at: http://www.cmde.science.ubc.ca/hallam/fastLSA/.

  20. AstroCom NYC: Expanding the Partnership

    Science.gov (United States)

    Paglione, Timothy; Ford, Saavik; Agueros, Marcel A.; Mac Low, Mordecai-Mark; Robbins, Dennis

    2015-01-01

    AstroCom NYC is an undergraduate mentoring program designed to improve urban minority student access to opportunities in astrophysical research by greatly enhancing partnerships between research astronomers in New York City (City University of New York - an MSI, American Museum of Natural History, and Columbia). AstroCom NYC provides centralized, personalized mentoring as well as financial and academic support, to CUNY undergraduates throughout their studies, plus the resources and opportunities to further CUNY faculty research with students. The goal is that students' residency at AMNH helps them build a sense of belonging in the field, and readies and inspires them for graduate study. AstroCom NYC provides a rigorous Methods of Scientific Research course developed specifically to this purpose, a laptop, research and career mentors, outreach activities, scholarships and stipends, Metrocards, and regular assessment for maximum effectiveness. Stipends in part alleviate the burdens at home typical for CUNY students so they may concentrate on their academic success. AMNH serves as the central hub for our faculty and students, who are otherwise dispersed among all five boroughs of the City. For our second cohort, we dramatically improved the application and screening process, implemented a number of tools to evaluate their potential for grad school, and began growing a network of potential hosts for summer internships around NY State and the US. We review these implementations and outcomes, as well as plans for Year 3, when we expect many of our current students to compete for external summer REUs, and after greatly expanding the program reach through a NASA community college initiative.

  1. Ecological connectivity networks in rapidly expanding cities.

    Science.gov (United States)

    Nor, Amal Najihah M; Corstanje, Ron; Harris, Jim A; Grafius, Darren R; Siriwardena, Gavin M

    2017-06-01

    Urban expansion increases fragmentation of the landscape. In effect, fragmentation decreases connectivity, causes green space loss and impacts upon the ecology and function of green space. Restoration of the functionality of green space often requires restoring the ecological connectivity of this green space within the city matrix. However, identifying ecological corridors that integrate different structural and functional connectivity of green space remains vague. Assessing connectivity for developing an ecological network by using efficient models is essential to improve these networks under rapid urban expansion. This paper presents a novel methodological approach to assess and model connectivity for the Eurasian tree sparrow (Passer montanus) and Yellow-vented bulbul (Pycnonotus goiavier) in three cities (Kuala Lumpur, Malaysia; Jakarta, Indonesia and Metro Manila, Philippines). The approach identifies potential priority corridors for ecological connectivity networks. The study combined circuit models, connectivity analysis and least-cost models to identify potential corridors by integrating structure and function of green space patches to provide reliable ecological connectivity network models in the cities. Relevant parameters such as landscape resistance and green space structure (vegetation density, patch size and patch distance) were derived from an expert and literature-based approach based on the preference of bird behaviour. The integrated models allowed the assessment of connectivity for both species using different measures of green space structure revealing the potential corridors and least-cost pathways for both bird species at the patch sites. The implementation of improvements to the identified corridors could increase the connectivity of green space. This study provides examples of how combining models can contribute to the improvement of ecological networks in rapidly expanding cities and demonstrates the usefulness of such models for

  2. PROFAM expands Mexican family planning clinics.

    Science.gov (United States)

    1983-01-01

    Mexico's private, nonprofit social marketing company, known as PROFAM, intends to expand its family planning clinics to marginal urban areas. The clinics are part of PROFAM's push to diversify social marketing outlets for contraceptive products and other birth control methods. PROFAM expects to establish 3 new clinics, possibly including a pregnancy test laboratory, a small 1-doctor clinic, and a large clinic housing an operating room. 1 clinic will be located outside the Mexico City area, the program's traditional boundaries. The company currently runs 2 small clinics and a pregnancy testing laboratory in Ciudad Netzahualcoyti, a community of 3.5 million on Mexico City's outskirts. PROFAM recently obtaine d government approval to sell condoms in food stores, which should increase distribtuion and sales. Currently, the company sells over 1 million high quality, lubricated condoms each month, accounting for over half of the Mexican market. Distribution covers 85% of the country's drugstore. Program setbacks occurred in 1981, when the Mexican government cancelled PROFAM's sales permits for all contraceptive products except condoms. Cancelled products included an oral contraceptive and 3 vaginal spermicides. These 4 products had provided nearly 100,000 couple years of protection in 1979 and an estimated 120,000 CYP 1980. During 1979 and 1980, condoms provided about 27,000 and 60,000 CYP, respectively. PROFAM had relied heavily on the pill and spermicides because its early studies showed condoms had a negative image in Mexico, due largely to the product's association with extramarital affairs. To counter this, PROFAM launched a widespread, free product sampling program in 1979, along with a continuing educational and advertising drive. Subsequent consumer surveys revealed a marked increase in product acceptance, with PROFAM's condom becoming the most widely known brand available in Mexico.

  3. Gonadotropin releasing hormone agonists: Expanding vistas

    Directory of Open Access Journals (Sweden)

    Navneet Magon

    2011-01-01

    Full Text Available Gonadotropin-releasing hormone (GnRH agonists are derived from native GnRH by amino acid substitution which yields the agonist resistant to degradation and increases its half-life. The hypogonadotropic hypogonadal state produced by GnRH agonists has been often dubbed as "pseudomenopause" or "medical oophorectomy," which are both misnomers. GnRH analogues (GnRH-a work by temporarily "switching off" the ovaries. Ovaries can be "switched off" for the therapy and therapeutic trial of many conditions which include but are not limited to subfertility, endometriosis, adenomyosis, uterine leiomyomas, precocious puberty, premenstrual dysphoric disorder, chronic pelvic pain, or the prevention of menstrual bleeding in special clinical situations. Rapidly expanding vistas of usage of GnRH agonists encompass use in sex reassignment of male to female transsexuals, management of final height in cases of congenital adrenal hyperplasia, and preserving ovarian function in women undergoing cytotoxic chemotherapy. Hypogonadic side effects caused by the use of GnRH agonists can be tackled with use of "add-back" therapy. Goserelin, leuprolide, and nafarelin are commonly used in clinical practice. GnRH-a have provided us a powerful therapeutic approach to the treatment of numerous conditions in reproductive medicine. Recent synthesis of GnRH antagonists with a better tolerability profile may open new avenues for both research and clinical applications. All stakeholders who are partners in women′s healthcare need to join hands to spread awareness so that these drugs can be used to realize their full potential.

  4. Exposing medical students to expanding populations

    Directory of Open Access Journals (Sweden)

    Lindenthal JJ

    2015-03-01

    Full Text Available JJ Lindenthal,1,2 JA DeLisa,3 GF Heinrich,4 WS Calderón Gerstein,5 1Department of Psychiatry, Institute for the Public Understanding of Health and Medicine, 2Department of Physical Medicine and Rehabilitation, New Jersey Medical School, Rutgers University, Newark, NJ, USA; 3Department of Orthopedics and Rehabilitation, University of New Mexico Health Science Center, Albuquerque, NM, USA; 4Department of Preventive Medicine and Community Health, New Jersey Medical School, Rutgers University, Newark, NJ, USA; 5Hospital Nacional Ramiro Prialé, EsSalud, Huancayo, Peru Abstract: Physicians are required to advocate for and counsel patients based on the best science and the interests of the individual while avoiding discrimination, ensuring equal access to health and mental services. Nonetheless, the communication gap between physician and patients has long been observed. To this end, the Institute for the Public Understanding of Health and Medicine of the Rutgers University New Jersey Medical School has expanded its efforts. This report describes two new programs: a legacy lecture series for medical students and an international “experience”, in Huancayo, Peru, for medical students and faculty. The MiniMed outreach program, now in its ninth year and first described in this journal in 2012, was designed to empower the powerless to communicate more effectively with clinicians, thus improving both the effectiveness of the physician–patient relationship and health care outcomes. The approach of the two new programs and their effects on patients, particularly the underserved, and medical students and faculty, are outlined in the following article. Keywords: MiniMed program, equal access, underserved populations, Newark Renaissance House, Kintock Group, role modeling 

  5. The Phenix expandable prosthesis: early American experience.

    Science.gov (United States)

    Wilkins, R M; Soubeiran, A

    2001-01-01

    One of the major dilemmas in limb preservation in skeletally immature children involves the ability to maintain leg length equality. Many attempts have been made to design a prosthesis that could be expanded easily either nonoperatively or through a minor surgical procedure. Most of these designs have had mechanical difficulty or the lengthening procedure becomes a major surgical endeavor. The Phenix technology has been used in France for several years. The basic principle involves storage of energy in a spring which is maintained compressed by an original locking system. Once implanted, prosthetic lengthening is achieved via exposure to an external electromagnetic field that pilots the locking system and allows controlled release of the spring energy. Seven Phenix prostheses have been implanted in six patients. All patients had been treated for Stage II-B osteosarcoma. Six of the seven prostheses were implanted during revision procedures in salvage situations; one prosthesis was implanted during an index procedure. The surgical procedures were completed without complications. One patient sustained a fracture of the prosthesis in a fall and had an infection develop after implantation of the second prosthesis. Twenty-one expansions have been performed in six patients (mean lengthening at each procedure, 8 mm). There were no acute complications attributable to the lengthening procedure. Prosthetic expansions required an average of 20 to 30 seconds and were accompanied by very mild discomfort, if any. Most patients were given an oral analgesic either before or during the lengthening procedure. The Phenix prosthesis shows promise in handling the difficult problem of limb preservation in a growing child. Additional investigation is underway regarding limb lengthening and other dynamic applications.

  6. Skeletal effects induced by Maxillary Skeletal Expander (MSE) and Hyrax appliance in the midface

    OpenAIRE

    Cantarella, Daniele

    2017-01-01

    Introduction: The purpose of this study was to evaluate the skeletal changes induced by Maxillary Skeletal Expander (MSE) and Hyrax appliance in the midface with the use of Cone-Beam Computed Tomographic images. A novel methodology to study the skeletal changes was developed. Our hypothesis is that MSE and Hyrax result in a dissimilar expansion pattern and magnitude. Materials and Methods: A novel methodology was developed that included three main reference planes (maxillary sagittal plane, a...

  7. The Aging Time Effects of the Pre-expanded Polystyrene on the Patterns Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Buczkowska K.

    2015-03-01

    Full Text Available The aging granulate is to activate the blowing agent during the manufacturing process to granulate models can re-expand and shape the model of well-sintered granules, smooth surface and a suitable mechanical strength. The article presents the results of studies which aim was to determine the optimum time for aging pre-foamed granules for pre-selected raw materials.

  8. The effect of vertical expandable prosthetic titanium rib on growth in congenital scoliosis

    OpenAIRE

    Mehmet Bulent Balioglu; Akif Albayrak; Yunus Emre Akman; Yunus Atici; Deniz Kargin; Mehmet Akif Kaygusuz

    2015-01-01

    Aims: In the treatment of thoracic insufficiency syndrome, the main aim is to maintain spinal and thoracic growth in order to continue respiratory functions. Vertical expandable prosthetic titanium rib (VEPTR) device application is a method of choice especially in the congenital cases with a thoracic deformity. In our study, we evaluated the effect of VEPTR on growth in congenital scoliosis. Materials and Methods: Four female patients in whom VEPTR was applied were retrospectively evaluated. ...

  9. Thermal delay provided by floors containing layers that incorporate expanded cork granule waste

    OpenAIRE

    Tadeu, A.; Moreira, A.; António, J.; Simões, N.; Simões, I.

    2014-01-01

    This paper reports the computation of the thermal delay provided by concrete floors built with layers of cork and lightweight screed that incorporate expanded cork granule waste. The heat transfer by conduction across these multilayer systems is simulated analytically under unsteady boundary conditions. The thermal delay is computed for multilayer concrete floors with varying numbers of layers and layer thicknesses. The mass density and thermal conductivity of the various materials were d...

  10. Competitive Adsorption between Polyethylene Glycol and Acid Brilliant Red on Expanded Graphite

    OpenAIRE

    Xiu-Yan Pang; Li-Li Zhang

    2012-01-01

    Expanded graphite (EG) adsorbent was prepared with graphite as raw materials, potassium permanganate as oxidant, and vitriol as intercalation compound. Polyethylene glycol (PEG) 10000 and Acid brilliant red 3B (ABR) with obvious difference in molecular weights were selected as organic adsorbates, and their adsorption and competitive adsorption thermodynamics and kinetics on EG were investigated. The results are: In both single component system and dual component system, the adsorption and com...

  11. Expander Families and Cayley Graphs A Beginner's Guide

    CERN Document Server

    Krebs, Mike

    2011-01-01

    The theory of expander graphs is a rapidly developing topic in mathematics and computer science, with applications to communication networks, error-correcting codes, cryptography, complexity theory, and much more. Expander Families and Cayley Graphs: A Beginner's Guide is a comprehensive introduction to expander graphs, designed to act as a bridge between classroom study and active research in the field of expanders. It equips those with little or no prior knowledge with the skills necessary to both comprehend current research articles and begin their own research. Central to this book are fou

  12. Infrastructure Requirements for an Expanded Fuel Ethanol Industry

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, Robert E. [Downstream Alternatives, Inc., South Bend, IN (United States)

    2002-01-15

    This report provides technical information specifically related to ethanol transportation, distribution, and marketing issues. This report required analysis of the infrastructure requirements for an expanded ethanol industry.

  13. Influence of Particle Size on Properties of Expanded Graphite

    Directory of Open Access Journals (Sweden)

    Kurajica, S

    2010-02-01

    Full Text Available Expanded graphite has been applied widely in thermal insulation, adsorption, vibration damping, gasketing, electromagnetic interference shielding etc. It is made by intercalation of natural flake graphite followed by thermal expansion. Intercalation is a process whereby an intercalant material is inserted between the graphene layers of a graphite crystal. Exfoliation, a huge unidirectional expansion of the starting intercalated flakes, occurs when the graphene layers are forced apart by the sudden decomposition and vaporization of the intercalated species by thermal shock. Along with production methodologies, such as the intercalation process and heat treatment, the raw material characteristics, especially particle size, strongly influence the properties of the final product.This report evaluates the influence of the particle size of the raw material on the intercalation and expansion processes and consequently the properties of the exfoliated graphite. Natural crystalline flake graphite with wide particle diameter distribution (between dp = 80 and 425 µm was divided into four size-range portions by sieving. Graphite was intercalated via perchloric acid, glacial acetic acid and potassium dichromate oxidation and intercalation procedure. 5.0 g of graphite, 7.0 g of perchloric acid, 4.0 g of glacial acetic acid and 2.0 g of potassium dichromate were placed in glass reactor. The mixture was stirred with n = 200 min–1 at temperature of 45 °C during 60 min. Then it was filtered and washed with distilled water until pH~6 and dried at 60 °C during 24 h. Expansion was accomplished by thermal shock at 1000 °C for 1 min. The prepared samples were characterized by means of exfoliation volume measurements, simultaneous differential thermal analysis and thermo-gravimetry (DTA/TGA, X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FTIR, BET measurements and scanning electron microscopy (SEM.X-ray diffraction indicated a change of distance

  14. Dynamic characteristics and seismic stability of expanded polystyrene geofoam embankments

    Science.gov (United States)

    Amini, Zahra A.

    Expanded Polystyrene (EPS) geofoam has become a preferred material in various construction applications due to its light weight. Application of EPS accelerates the projects particularly on soft soils. The focus of this research is on the application of the EPS in embankments and its behavior mainly under harmonic vibration. The goal of this study was to investigate dynamic characteristics of freestanding vertical EPS geofoam embankment and address potential seismic issues that result from the distinguished dynamic behavior of such systems due to the layered and discrete block structure. A series of experimental studies on EPS 19 and a commercially available adhesive was conducted. Two-dimensional numerical analyses were performed to replicate the response of EPS geofoam embankment to horizontal and vertical harmonic motions. The results of the analyses have shown that for some acceleration amplitude levels interlayer sliding is expected to occur in EPS geofoam embankments almost immediately after the start of the base excitation; however, as a highly efficient energy dissipation mechanism sliding ceases rapidly. Shear keys and adhesive may be used to prevent interlayer sliding if they cover the proper extent of area of the embankment. EPS blocks placed in the corners of the embankment and at the edges of the segment prohibited from sliding may experience high stress concentrations. The embankment may show horizontal sway and rocking once sliding is prevented.

  15. Catalytic pyrolysis of car tire waste using expanded perlite.

    Science.gov (United States)

    Kar, Y

    2011-08-01

    In this study, the non-catalytic and catalytic pyrolysis experiments were conducted on the sample of tire waste using expanded perlite as an additive material to determine especially the effect of temperature and catalyst-to-tire ratio on the products yields and the compositions and qualities of pyrolytic oils (NCPO and CPO). Non-catalytic studies, which were carried out under the certain conditions (a nitrogen flow of 100mL/min and a heating rate of 10°C/min), showed that the highest yield of pyrolytic oil (NCPO) was 60.02wt.% at 425°C. Then, the catalytic pyrolysis studies were carried out at catalyst-to-tire ratio range of 0.05-0.25 and the highest catalytic pyrolytic oil (CPO) yield was 65.11wt.% at the ratio of 0.10 with the yield increase of 8.48wt.% compared with the non-catalytic pyrolysis. Lastly, the pyrolytic oils were characterized with applying a various techniques such as elemental analyses and various chromatographic and spectroscopic techniques (GC-MS, (1)H NMR, FT-IR, etc.). The characterization results revealed that the pyrolytic oils which were complex mixtures of C(5)-C(15) organic compounds (predominantly aromatic compounds) and also the CPO compared to the NCPO was more similar to conventional fuels in view of the certain fuel properties. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Adsorption Characteristics of Polyvinyl Alcohols in Solution on Expanded Graphite

    Directory of Open Access Journals (Sweden)

    Xiu-Yan Pang

    2012-01-01

    Full Text Available Expanded graphite (EG adsorbent was prepared with 50 mesh graphite as raw materials, potassium permanganate as oxidant, and vitriol as intercalation compound. Three kinds of polyvinyl alcohol (PVA with different degree of polymerization (DP in aqueous solution were used as adsorbates. We have studied the influence of initial PVA concentration, temperature and ionic strength on adsorption capacity. Langmuir constants and Gibbs free energy change (⊿G° were calculated according to experimental data respectively. Thermodynamic analysis indicates the equilibrium adsorbance of PVA on EG increase with the rise of SO42– concentration. Adsorption isotherms of PVA with different degree of polymerization are all types and we deduce PVA molecules lie flat on EG surface. Adsorption processes are all spontaneous. Kinetic studies show that the kinetic data can be described by pseudo second-order kinetic model. Second-order rate constants and the initial adsorption rate rise with the increasing of temperature and half-adsorption time decreases with the increasing of temperature. The adsorption activation energy of each PVA is less than 20 kJ•mol−1, physical adsorption is the major mode of the overall adsorption process.

  17. Vietnam seeks help expanding voluntary surgical contraception.

    Science.gov (United States)

    Piet-pelon, N J; Sukop, S

    1992-07-01

    Recent surveys by the Vietnamese Ministry of Health suggest that 60% of married women desire no more children. Yet only 2% of currently married women and less than 1/2 of 1% of their partners use sterilization. Underscoring the high unmet need for effective family planning, over 1 million abortions (legal in Vietnam for the past 20 years) are performed annually. This rate corresponds to 1 abortion for every live birth. The Ministry of Health has recently welcomed a variety of organizations, including AVSC, whose assistance can help expand the country's family planning programs. Sorely lacking in supplies, equipment, and trained personnel, Vietnam has merited priority status--2nd only to China and India--from the UNFPA, which has committed $36 million over the next 4 years. Other organizations currently working in Vietnam include the Population Council, the Population Crisis Committee, and the International Planned Parenthood Federation. Despite enormous casualties during the war years, and a decrease since the 1970s in average family size from 6 to 4 children, the population of Vietnam has continued to grow rapidly, far outpacing economic growth. Currently 67 million, the population is expected to reach 80 million by the year 2000. The average Vietnamese annual income is only $195, among the lowest in the world. Doi moi, the process of economic reform begun in 1986, coupled with new government incentives for families who have no more than 2 children, is changing the face of family planning in Vietnam. Newly opened pharmacies sell imported birth control pills and condoms (to those who can afford them), while government hospitals and health clinics provide mainly IUDs, in addition to limited supplies of pills and condoms. Throughout the country, some 8000 community-level health centers are staffed by nurse-midwives trained in family planning. Voluntary sterilization is available at the district, provincial, and national hospitals. All married women may obtain family

  18. Expanding policy options for educating teenagers.

    Science.gov (United States)

    Stern, David

    2009-01-01

    David Stern argues that some basic features of the American high school must be modified if it is to serve all students successfully. He notes, for example, that only three-quarters of U.S. high school students graduate four years after beginning ninth grade and that the National Assessment of Educational Progress found no improvement in reading or mathematics for seventeen-year-olds between 1971 and 2004. The nation's system for educating teenagers, says Stern, seems to be stuck, despite the constant efforts of teachers and repeated waves of reform. Citing two widely accepted public purposes of educating teenagers-preparation for civic participation and for economic self-sufficiency-Stern proposes four new strategies to achieve those goals. He draws on empirical evidence suggesting that these are promising directions for research and policy, but acknowledges that existing studies provide only limited guidance. First, he says, schools should continue the current trend toward integrating educational options to provide young people with skills and experiences that pave the way to both college and careers. Second, states and districts should tie education funding not simply to the number of students attending school, but also to what young people learn, whether they graduate, and whether they find jobs or enroll in postsecondary education. Such a move, he argues, would encourage teaching and learning formats that use students' time more effectively. Third, more adults in addition to classroom teachers should be involved in educating teenagers. Other adults acting as academic advisers, learning coaches, student advocates, internship supervisors, mentors, and college counselors could help guide the education of teenagers inside and outside of school and provide some relief for the chronic shortage of teachers. Fourth, schools should expand the options for educating teenagers outside of geographically fixed schools. Combining improved Internet-based curriculum with

  19. Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application

    Science.gov (United States)

    Paradis, Charles J.; McKay, Larry D.; Perfect, Edmund; Istok, Jonathan D.; Hazen, Terry C.

    2017-10-01

    The analytical solution describing the one-dimensional displacement of the center of mass of a tracer during an injection, drift, and extraction test (push-pull test) was expanded to account for displacement during the injection phase. The solution was expanded to improve the in situ estimation of effective porosity. The truncated equation assumed displacement during the injection phase was negligible, which may theoretically lead to an underestimation of the true value of effective porosity. To experimentally compare the expanded and truncated equations, single-well push-pull tests were conducted across six test wells located in a shallow, unconfined aquifer comprised of unconsolidated and heterogeneous silty and clayey fill materials. The push-pull tests were conducted by injection of bromide tracer, followed by a non-pumping period, and subsequent extraction of groundwater. The values of effective porosity from the expanded equation (0.6-5.0%) were substantially greater than from the truncated equation (0.1-1.3%). The expanded and truncated equations were compared to data from previous push-pull studies in the literature and demonstrated that displacement during the injection phase may or may not be negligible, depending on the aquifer properties and the push-pull test parameters. The results presented here also demonstrated the spatial variability of effective porosity within a relatively small study site can be substantial, and the error-propagated uncertainty of effective porosity can be mitigated to a reasonable level (< ± 0.5%). The tests presented here are also the first that the authors are aware of that estimate, in situ, the effective porosity of fine-grained fill material.

  20. Material efficiency in a multi-material world.

    Science.gov (United States)

    Lifset, Reid; Eckelman, Matthew

    2013-03-13

    Material efficiency--using less of a material to make a product or supply a service--is gaining attention as a means for accomplishing important environmental goals. The ultimate goal of material efficiency is not to use less physical material but to reduce the impacts associated with its use. This article examines the concept and definition of material efficiency and argues that for it to be an effective strategy it must confront the challenges of operating in a multi-material world, providing guidance when materials are used together and when they compete. A series of conceptions of material efficiency are described, starting with mass-based formulations and expanding to consider multiple resources in the supply chain of a single material, and then to multiple resources in the supply chains of multiple materials used together, and further to multiple environmental impacts. The conception of material efficiency is further broadened by considering material choice, exploring the technical and economic effects both of using less material and of materials competition. Finally, this entire materials-based techno-economic system is considered with respect to the impact of complex policies and political forces. The overall goal here is to show how the concept of material efficiency when faced with more expansive--and yet directly relevant--definitional boundaries is forced to confront analytical challenges that are both familiar and difficult in life cycle assessment and product-based approaches.

  1. The Early Years: Mixing Materials

    Science.gov (United States)

    Ashbrook, Peggy

    2017-01-01

    Engaging children's interest, inspiring active exploration of materials, and fostering cooperation between children and adults is the best way to promote the construction of knowledge. Some popular early childhood activities can be expanded to provide experiences and time for children to build on their prior knowledge. This column discusses…

  2. Study and design of beam expander with wide aperture

    Science.gov (United States)

    Guo, Ming; Jin, Guangyong; Cai, Jixing; Zhang, Wei; Wei, Zhi

    2014-12-01

    In order to improve the capacity of beam collimation for laser beam expander, it is necessary to design a more reasonable and feasible structure of beam expander system. Laser beam expander is used to compress the laser divergence angle, in order to reduce the energy losing in long distance scanning acquisition system. This paper introduces the working principle and design idea of the laser beam expander, the collimating multiplying power focal length and the collimated magnification formula of expander main, secondary mirror. According to the third-order aberration theory, Considering the spherical aberration, sine difference and divergence angle, the reasonable analysis of optical path, ZEMAX optical design software was used to design large-diameter laser beam expander and analysis and optimize, And given the actual design data and results. Display the maximum optical path difference is +/-0.01λ of the main light ray and each light ray. To combination the rear- group objective lens of Galileo and Kepler beam expander, a large-diameter(1.475m) laser beam expander was designed with 0.2m in the diameter, 1/2m in the relative caliber. In the objective lens System, a high-order aspherical was used to the aberration of extra-axial point. we can see that the image quality is close to the diffraction limit from the curves of wavefront. In addition to improve image quality effectively, the system has the characteristics of simple structure, less costly and less design difficulty to compare with the other beam expanding system. And make the output beam's divergence angle smaller, energy density higher, and the beam quality has been greatly improved. The results show that the beam expander is fully meet the design requirements, the use effect is good. Design and research of laser beam expanding system not only improves the quality of the laser beam in the laser system, but also enlarge the application field of laser technology in photoelectric system.

  3. Effect of addition of pore expanding agent on changes of structure characteristics of ordered mesoporous silicas

    Energy Technology Data Exchange (ETDEWEB)

    Derylo-Marczewska, A. [Faculty of Chemistry, M. Curie-Sklodowska University, M. Curie-Sklodowska Sq. 3, 20-031 Lublin (Poland)], E-mail: annad@hektor.umcs.lublin.pl; Marczewski, A.W.; Skrzypek, I.; Pikus, S. [Faculty of Chemistry, M. Curie-Sklodowska University, M. Curie-Sklodowska Sq. 3, 20-031 Lublin (Poland); Kozak, M. [Department of Macromolecular Physics, A. Mickiewicz University, 61-614 Poznan (Poland)

    2008-12-30

    A series of mesoporous silica materials were synthesized by applying two types of Pluronic copolymers as pore creating agents. Differentiation of pore structure of the obtained sorbents was attained by changing the amount of trimethylbenzene as pore expander introduced to a reacting mixture. The parameters characterizing porous structure were estimated from nitrogen adsorption/desorption isotherms. The changes of pore arrangement in the synthesized materials were investigated by using X-ray diffraction. The structural transformations were found at the TMB/polymer ratio of 0.8 and 1. Correlations between the values of structure parameters and the content of TMB were found.

  4. An Isothermal Steam Expander for an Industrial Steam Supplying System

    Directory of Open Access Journals (Sweden)

    Chen-Kuang Lin

    2015-01-01

    Full Text Available Steam is an essential medium used in the industrial process. To ensure steam quality, small and middle scale boilers are often adopted. However, because a higher steam pressure (compared to the necessary steam pressure is generated, the boiler’s steam pressure will be reduced via a pressure regulator before the steam is directed through the process. Unfortunately, pressure is somewhat wasted during the reducing process. Therefore, in order to promote energy efficiency, a pressure regulator is replaced by a steam expander. With this steam expander, the pressure will be transformed into mechanical energy and extracted during the expansion process. A new type of isothermal steam expander for an industrial steam supplying system will be presented in the paper. The isothermal steam expander will improve the energy efficiency of a traditional steam expander by replacing the isentropic process with an isothermal expansion process. With this, steam condensation will decrease, energy will increase, and steam quality will be improved. Moreover, the mathematical model of the isothermal steam expander will be established by using the Schmidt theory, the same principle used to analyze Stirling engines. Consequently, by verifying the correctness of the theoretical model for the isothermal steam expander using experimental data, a prototype of 100 c.c. isothermal steam expander is constructed.

  5. Compressive and Tensile Strength of Expanded Polystyrene Beads Concrete

    OpenAIRE

    Subhan, Tengku Fitriani L

    2005-01-01

    Penelitian ini betujuan untuk mempelajari property dari beton ringan yang mengandung expanded polystyrene beads, yaitu kuat tekan (compressive strength) dan kuat tarik (tensile strength). Property tersebut kemudian dibandingkan dengan beton normal (beton tanpa expanded polystyrene beads) sebagai campuran pengontrol. Hasil penelitian ini menunjukkan bahwa jumlah polystyrene beads yang dimasukkan sebagai campuran beton mempengaruhi property beton; yaitu dapat menurunkan kuat tekan beton. Tetapi...

  6. Principles of the fifth order tuning of beam expanders

    Energy Technology Data Exchange (ETDEWEB)

    Meot, F.; Aniel, T.

    1995-12-31

    An analytical treatment of the third and fifth order optics of beam expanders is described, which allows precise tuning of the optical elements of the beam line, and efficient optimization of the beam uniformizing at the extended target. An application to a two-dimensional expander is given as an illustration. (authors). 4 refs.

  7. 21 CFR 878.5035 - Nonabsorbable expanded polytetrafluoroethylene surgical suture.

    Science.gov (United States)

    2010-04-01

    ... surgical suture. 878.5035 Section 878.5035 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Devices § 878.5035 Nonabsorbable expanded polytetrafluoroethylene surgical suture. (a) Identification. Nonabsorbable expanded polytetrafluoroethylene (ePTFE) surgical suture is a monofilament, nonabsorbable, sterile...

  8. Expanding Agricultural and Rural Extension Roles for Sustainable ...

    African Journals Online (AJOL)

    Expanding Agricultural and Rural Extension Roles for Sustainable Extension Practice in Nigeria. ... The expanded scope could include marketing extension, non-farm rural micro enterprise development, service to farmers' associations, technical extension service and urban extension. These services should be provided at ...

  9. Comparision of the Expandable Nail with Locked Nail in the ...

    African Journals Online (AJOL)

    2017-09-14

    Sep 14, 2017 ... fracture patterns as informed in a biomechanical study. Maher et al.[36] compared the expandable nail with a standard locked nail in fracture model, finding that spiral fracture patterns, rather than transverse fractures, were more suitable for expandable nail fixation.. However, in this study bending and ...

  10. New York: Expanding Time, Increasing Opportunities for Achievement

    Science.gov (United States)

    Miller, Tiffany D.

    2014-01-01

    New York is poised to take an important step to improve student achievement by expanding learning time for students attending high-poverty, low-performing schools. Recent district- and state-level investments in expanded learning time--a promising strategy to close achievement and opportunity gaps--will give students more time to learn core…

  11. Detection of tissue expander leakage by methylene blue instillation ...

    African Journals Online (AJOL)

    Background: Tissue expansion is an important and widely used technique of soft tissue reconstruction. Leakage of the expanders is one of the complications and it might at times be difficult to detect. Method and Conclusion: We used methylene blue stained saline for inflation of tissue expanders in 42 cases and found it to ...

  12. Still Not Equal: Expanding Educational Opportunity in Society

    Science.gov (United States)

    Brown, M. Christopher, II, Ed.

    2007-01-01

    "Still Not Equal: Expanding Educational Opportunity in Society" addresses the successes and failures of "Brown v. Board of Education" and the Civil Rights Act of 1964, as well as the continuing challenge of expanding educational opportunity in the United States and across the Black diaspora. The educational, political, and social influence…

  13. Backyard Telescopes Watch an Expanding Binary

    Science.gov (United States)

    Kohler, Susanna

    2018-01-01

    What can you do with a team of people armed with backyard telescopes and a decade of patience? Test how binary star systems evolve under Einsteins general theory of relativity!Unusual VariablesCataclysmic variables irregularly brightening binary stars consisting of an accreting white dwarf and a donor star are a favorite target among amateur astronomers: theyre detectable even with small telescopes, and theres a lot we can learn about stellar astrophysics by observing them, if were patient.Diagram of a cataclysmic variable. In an AM CVn, the donor is most likely a white dwarf as well, or a low-mass helium star. [Philip D. Hall]Among the large family of cataclysmic variables is one unusual type: the extremely short-period AM Canum Venaticorum (AM CVn) stars. These rare variables (only 40 are known) are unique in having spectra dominated by helium, suggesting that they contain little or no hydrogen. Because of this, scientists have speculated that the donor stars in these systems are either white dwarfs themselves or very low-mass helium stars.Why study AM CVn stars? Because their unusual configuration allows us to predict the behavior of their orbital evolution. According to the general theory of relativity, the two components of an AM CVn will spiral closer and closer as the system loses angular momentum to gravitational-wave emission. Eventually they will get so close that the low-mass companion star overflows its Roche lobe, beginning mass transfer to the white dwarf. At this point, the orbital evolution will reverse and the binary orbit will expand, increasing its period.CBA member Enrique de Miguel, lead author on the study, with his backyard telescope in Huelva, Spain. [Enrique de Miguel]Backyard Astronomy Hard at WorkMeasuring the evolution of an AM CVns orbital period is the best way to confirm this model, but this is no simple task! To observe this evolution, we first need a system with a period that can be very precisely measured best achieved with an

  14. Minimizing carry-over PCR contamination in expanded CAG/CTG repeat instability applications.

    Science.gov (United States)

    Aeschbach, Lorène; Dion, Vincent

    2017-12-21

    Expanded CAG/CTG repeats underlie the aetiology of 14 neurological and neuromuscular disorders. The size of the repeat tract determines in large part the severity of these disorders with longer tracts causing more severe phenotypes. Expanded CAG/CTG repeats are also unstable in somatic tissues, which is thought to modify disease progression. Routine molecular biology applications involving these repeats, including quantifying their instability, are plagued by low PCR yields. This leads to the need for setting up more PCRs of the same locus, thereby increasing the risk of carry-over contamination. Here we aimed to reduce this risk by pre-treating the samples with a Uracil N-Glycosylase (Ung) and using dUTP instead of dTTP in PCRs. We successfully applied this method to the PCR amplification of expanded CAG/CTG repeats, their sequencing, and their molecular cloning. In addition, we optimized the gold-standard method for measuring repeat instability, small-pool PCR (SP-PCR), such that it can be used together with Ung and dUTP-containing PCRs, without compromising data quality. We performed SP-PCR on myotonic-dystrophy-derived samples containing an expansion as large as 1000 repeats, demonstrating the applicability to clinically-relevant material. Thus, we expect the protocols herein to be applicable for molecular diagnostics of expanded repeat disorders.

  15. [Reconstruction in plastic surgery using osmotic tissue expanders].

    Science.gov (United States)

    Gronovich, Yoav; Binenboym, Rami; Retchkiman, Meir; Eizenman, Nirit; Lotan, Adi; Stuchiner, Barak; Tuchman, Izhak

    2015-03-01

    Tissue expander is a major reconstructive modality. Its main disadvantages include: long and inconvenient period of inflation with temporary deformity of the surrounding tissue. Osmotic expander was developed in order to eliminate some of these limitations. It is a self-filling device which absorbs fluids in order to achieve tissue expansion faster. We present our experience with 28 consecutive cases of tissue reconstruction using osmotic expanders. We wish to emphasize the main advantages and limitations of this device. The present study was launched in May 2008, until April 2014, for twenty eight patients, median age 26 years with reconstructions using an osmotic expander (total of 35 expanders). The reasons for using tissue expander included large congenital nevi (75%) and scars. In all of the cases, the operative and post-operative management was uneventful. During the expansion period, there were 2 outpatient clinical visits. The average expansion time was 9 weeks. In 11% (three patients) there was partial extrusion of the expander. In all other cases there were no complications and the final aesthetic results were satisfying. Osmotic expander is an advanced modality for tissue reconstruction. The final shape and size are precisely predictable. Its initial small size allows for a small surgical incision and short overall operating time. The expansion period is shorter and more convenient for the patient. Its main disadvantage includes the inability to control the filling rate and the need to remove the expander in case of damage to the overlying tissue. Osmotic expander is a reliable tool for tissue expansion. It allows for a satisfying aesthetic result in a shorter period of time and with less inconvenience to the patient.

  16. More and Better Learning: Year Three Report on the National Demonstration of ExpandED Schools. A TASC Report

    Science.gov (United States)

    Traill, Saskia; Brohawn, Katie

    2015-01-01

    In the 2013-14 school year, TASC entered the third year of its national demonstration of ExpandED Schools. Ten elementary and middle schools in New York City, Baltimore and New Orleans continued their partnerships with youth-serving community organizations, such as settlement houses or community development corporations. Together, principals,…

  17. CONSTRUCTION MATERIALS FROM WASTE PRODUCTS

    Directory of Open Access Journals (Sweden)

    Тахира Далиевна Сидикова

    2016-02-01

    Full Text Available We have studied the physical and chemical processes occurring during the thermal treatment of ceramic masses on the basis of compositions of natural raw materials and waste processing facilities. The study of structures of ceramic samples species has shown different types of crystalline phases.The results have shown that the waste of Kaytashsky tungsten-molybdenum ores (KVMR may be used as the main raw material to develop new compositions for ceramic materials. The optimal compositions of ceramic tiles for the masses and technological parameters of obtaining sintered materials based on the compositions of kaolin fireclay KVMR have been developed.It has been found that the use of the waste of Kaytashskoy tungsten-molybdenum ore (KVMR in the composition of the ceramic material will expand the raw material base of ceramic production, reduce the roasting temperature and the cost of ceramic materials and products.

  18. Expanding role of a blood center

    Directory of Open Access Journals (Sweden)

    Jaisy Mathai

    2012-01-01

    Full Text Available Materials and Methods: The study was performed on prospective donors who reported to the Department of Transfusion Medicine. Individuals deferred due to hypertension contributed the study population. They were compared with age and sex matched donor controls. Demographic details were recorded in a proforma. On identification of a hypertensive individual, consequent two comparable donors were taken as controls with a total of 50 hypertensive subjects. Hypertensive status of the subjects were assessed based on the criteria formulated by the WHO-ISH and US Seventh Joint National Committee report on prevention, detection, evaluation and treatment of high blood pressure. Results: About 0.95% of healthy blood donors had undetected hypertension. Mean age at detection of hypertension in the study group was 35.44 ± 7.69 years. Higher BMI was observed in the hypertensive group compared to normotensive control group with P value significant at 0.0001. Conclusion: About 1% of healthy individuals were found to have undetected hypertension. Though the study was not designed to determine the prevalence of hypertension in the region, it is a rough estimate of the proportion of undetected hypertension in the local population as donors are considered as representative of healthy population.

  19. IMPROVED TISSUE INGROWTH AND ANCHORAGE OF EXPANDED POLYTETRAFLUOROETHYLENE BY PERFORATION - AN EXPERIMENTAL-STUDY IN THE RAT

    NARCIS (Netherlands)

    SIMMERMACHER, RKJ; VANDERLEI, B; SCHAKENRAAD, JM; BLEICHRODT, RP

    Although an expanded polytetrafluoroethylene patch is a suitable synthetic material to repair large abdominal wall defects, lack of tissue ingrowth into the patch may give rise to herniation at the fascia-patch interface. This study was undertaken to determine whether perforations and/or ethanol

  20. Tubeless percutaneous nephrolithotomy: outcomes with expanded indications

    Directory of Open Access Journals (Sweden)

    Wahib Isac

    2014-04-01

    Full Text Available IntroductionTubeless PCNL has been utilized to shorten hospital stay and improve patient postoperative pain control. Prior studies have excluded those patients with significant bleeding or other complications. Our objective was to evaluate the utility of tubeless PCNL in all patients irrespective of intraoperative outcome.Materials and MethodsA retrospective review of the charts of patients who underwent PCNL at our institute was performed. Patients were assigned to one endourologist who routinely performed tubeless PCNL and to a second endourologist who routinely left a small-bore pigtail nephrostomy. Preoperative demographics operative and postoperative outcomes were compared.ResultsOut of 159 patients included, 83 patients had tubeless PCNL while 76 patients had standard PCNL. There was no difference between groups regarding age, gender, ASA score, number, maximum diameter of stones, number of calyces involved, stone density (HU, laterality and use of preoperative narcotics. While staghorn stones were more common in patients who underwent standard PCNL (p = 0.008. Tubeless patients had less number of access tracts (p ≤ 0.001, shorter hospital stay (1.7 vs. 3.0 days, p = 0.001 when compared to standard PCNL group. Multivariable analysis controlling for confounding factors including staghorn calculi and number of accesses confirmed that tubeless PCNL was associated with shorter hospital stay and less postoperative pain. There was no significant difference in complication rates between the two groups.ConclusionOur report confirms the previous reports of shorter hospital stay, less pain and analgesia as compared to standard PCNL, and establishes its safety irrespective of bleeding, perforation, extravasation or other intraoperative issues that have previously been utilized as exclusionary criteria for this approach.

  1. Rupture of an expander prosthesis mimics axillary cancer recurrence.

    LENUS (Irish Health Repository)

    Ismael, T

    2005-10-01

    Regional silicone gel migration from a ruptured breast implant has been reported at different locations including the upper extremity, chest wall muscles, axilla and back. We report a patient who presented with an axillary mass that mimicked a regional recurrence 5 years after breast cancer reconstruction with a latissimus dorsi musculocutaneous flap and silicon gel expander-prosthesis. Surgical exploration revealed that the mass contained silicone gel around the port of the breast expander that had ruptured. The mass was confluent with an intracapsular silicone leak through a tract along the tube of the expander port.

  2. Acute expanded perlite exposure with persistent reactive airway dysfunction syndrome.

    Science.gov (United States)

    Du, Chung-Li; Wang, Jung-Der; Chu, Po-Chin; Guo, Yue-Liang Leon

    2010-01-01

    Expanded perlite has been assumed as simple nuisance, however during an accidental spill out in Taiwan, among 24 exposed workers followed for more than 6 months, three developed persisted respiratory symptoms and positive provocation tests were compatible with reactive airway dysfunction syndrome. During simulation experiment expanded perlite is shown to be very dusty and greatly exceed current exposure permission level. Review of literature and evidence, though exposure of expanded perlite below permission level may be generally safe, precautionary protection of short term heavy exposure is warranted.

  3. Functionality Evaluation of a Novel Smart Expandable Pedicle Screw to Mitigate Osteoporosis Effect in Bone Fixation: Modeling and Experimentation

    Directory of Open Access Journals (Sweden)

    Ahmadreza Eshghinejad

    2013-01-01

    Full Text Available This paper proposes a novel expandable-retractable pedicle screw and analyzes its functionality. A specially designed pedicle screw is described which has the ability to expand and retract using nitinol elements. The screw is designed to expand in body temperature and retract by cooling the screw. This expansion-retraction function is verified in an experiment designed in larger scale using a nitinol antagonistic assembly. The results of this experiment are compared to the results of a finite element model developed in Abaqus in combination with a user material subroutine (UMAT. This code has been developed to analyze the nonlinear thermomechanical behavior of shape memory alloy materials. The functionality of the proposed screw is evaluated with simulation and experimentation in a pullout test as well. The pullout force of a normal screw inserted in a normal bone was simulated, and the result is compared with the results of the expandable screw in osteoporotic bone. Lastly, strength of the designed pedicle screw in a foam block is also verified with experiment. The reported finite element simulations and experiments are the proof for the concept of nitinol expandable-retractable elements on a pedicle screw which validate the functionality in a pullout test.

  4. In Situ Expanding Pores of Dodecahedron-like Carbon Frameworks Derived from MOFs for Enhanced Capacitive Deionization.

    Science.gov (United States)

    Wang, Zhuo; Yan, Tingting; Shi, Liyi; Zhang, Dengsong

    2017-05-03

    The pores of dodecahedron-like carbon frameworks derived from metal-organic frameworks (MOFs) were in situ expanded via a surfactant-template strategy, which were originally demonstrated to enhance capacitive deionization (CDI). The dodecahedron-like carbon frameworks were obtained through carbonization of zeolitic imidazolate framework-8 (ZIF-8) using the cetyltrimethylammonium bromide as a supramolecular template. It is found that the dodecahedron-like carbon frameworks derived from ZIF-8 possess efficiently expanded pores while retaining the original morphology and high nitrogen contents. Compared to those of the normal ZIF-8-derived carbon, the obtained materials exhibit a hierarchically porous structure with a higher specific surface area and an improved pore volume. Electrochemical studies of the obtained electrode demonstrate that this material has a high specific capacitance and lower inner resistance. More importantly, the obtained material shows a higher salt adsorption capacity (20.05 mg/g) than the normal ZIF-8-derived carbon (13.01 mg/g). Furthermore, the obtained electrode presents a rapid salt removal rate and excellent cycling stability. The significantly enhanced deionization behavior of the obtained materials is due to the combination effect of its large accessible surface area, large pore volume, and rich nitrogen doping. The results reveal that in situ expanding pores of carbon frameworks derived from MOFs is an ideal way for constructing electrode materials with enhanced CDI performance. The present work may pave a path for the design and development of highly efficient MOF-derived electrode materials.

  5. Editorial: Biodegradable Materials

    Directory of Open Access Journals (Sweden)

    Carl Schaschke

    2014-11-01

    Full Text Available This Special Issue “Biodegradable Materials” features research and review papers concerning recent advances on the development, synthesis, testing and characterisation of biomaterials. These biomaterials, derived from natural and renewable sources, offer a potential alternative to existing non-biodegradable materials with application to the food and biomedical industries amongst many others. In this Special Issue, the work is expanded to include the combined use of fillers that can enhance the properties of biomaterials prepared as films. The future application of these biomaterials could have an impact not only at the economic level, but also for the improvement of the environment.

  6. REGIONAL MULTILATERAL DEVELOPMENT BANKS. External Audit Reporting Could Be Expanded

    National Research Council Canada - National Science Library

    2001-01-01

    While the traditional role of the external audit function is to express an independent opinion on an entity's financial statements, this role has increasingly been expanded to include reviews of internal control...

  7. Expandable Cryogenic Tankage for On Orbit Depot Storage Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed expandable depot storage tanks would make it possible to have an on-orbit tank larger in volume than any existing or planned launch vehicles. The size...

  8. Development of a New Air Liquide Cryogenic Expander

    Science.gov (United States)

    Marot, G.; Courty, J. C.; Delcayre, F.; Drevard, L.; Durand, F.; Gianese, P.

    2006-04-01

    Air Liquide's Advanced Technology Division is a manufacturer of cryogenic expanders. More than 450 units are now working around the world, mainly dedicated to liquefiers, refrigerators and H2-CO purification units. In order to cope with the power increase of these units, a new expander called "TC7" has been developed and tested. This expander permits turbine wheel diameters up to 110 mm, while the other units of the range (from TC3 to TC6, by increasing wheel diameter) are limited to 78 mm. The maximum flow rate is therefore doubled. The main technical features of the existing range have been kept, and adapted in size: static radial and thrust bearings, low loss casing, variety of wheel shapes (radial-radial shrouded or un-shrouded, radial-axial). This paper describes the main design characteristics of this new expander, together with manufacturing aspects and test results.

  9. Environmental assessment, expanded Ponnequin wind energy project, Weld County, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The US Department of Energy (DOE) has considered a proposal from the State of Colorado, Office of Energy Conservation (OEC), for funding construction of the Expanded Ponnequin Wind Project in Weld County, Colorado. OEC plans to enter into a contracting arrangement with Public Service Company of Colorado (PSCo) for the completion of these activities. PSCo, along with its subcontractors and business partners, are jointly developing the Expanded Ponnequin Wind Project. The purpose of this Final Environmental Assessment (EA) is to provide DOE and the public with information on potential environmental impacts associated with the Expanded Ponnequin Wind Energy Project. This EA, and public comments received on it, were used in DOE`s deliberations on whether to release funding for the expanded project under the Commercialization Ventures Program.

  10. Self-Expanding, Tough Biodegradable Elastomers for Wound Stasis

    Science.gov (United States)

    2015-08-06

    the civilian setting, with no effective therapies available at point of injury. We previously reported that a self- expanding polyurethane foam...collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. Arsenal...setting, with no effective therapies available at point of injury. We previously reported that a self-expanding polyurethane foam significantly

  11. Expanding the concept of sustainable seafood using Life Cycle Assessment

    DEFF Research Database (Denmark)

    Ziegler, Friederike; Hornborg, Sara; Green, Bridget S

    2016-01-01

    Fisheries management and sustainability assessment of fisheries more generally have recently expanded their scope from single-species stock assessment to ecosystem-based approaches, aiming to incorporate economic, social and local environmental impacts, while still excluding global-scale environm......Fisheries management and sustainability assessment of fisheries more generally have recently expanded their scope from single-species stock assessment to ecosystem-based approaches, aiming to incorporate economic, social and local environmental impacts, while still excluding global...

  12. An Expanded CAG Repeat in Huntingtin Causes +1 Frameshifting*

    OpenAIRE

    Saffert, Paul; Adamla, Frauke; Schieweck, Rico; Atkins, John F.; Ignatova, Zoya

    2016-01-01

    Maintenance of triplet decoding is crucial for the expression of functional protein because deviations either into the −1 or +1 reading frames are often non-functional. We report here that expression of huntingtin (Htt) exon 1 with expanded CAG repeats, implicated in Huntington pathology, undergoes a sporadic +1 frameshift to generate from the CAG repeat a trans-frame AGC repeat-encoded product. This +1 recoding is exclusively detected in pathological Htt variants, i.e. those with expanded re...

  13. An Expanded Model of Distributed Leadership in Organizational Knowledge Creation

    OpenAIRE

    Cannatelli, B.; Smith, B. J.; Giudici, A.; Jones, J; Conger, M.

    2016-01-01

    Based on a three-year qualitative, longitudinal case study of a social venture partnership, we extend the understanding of distributed leadership in organizational knowledge creation. We develop an expanded model of distributed leadership that identifies the antecedents, different forms, and enablers of distributed leadership in knowledge creation. Our findings move beyond a static and monolithic understanding of distributed leadership to illustrate how an expanded model informs the situation...

  14. Chronic expanding hematoma in the retroperitoneal space: a case report.

    Science.gov (United States)

    Syuto, Takahiro; Hatori, Motoaki; Masashi, Nomura; Sekine, Yoshitaka; Suzuki, Kazuhiro

    2013-11-18

    Chronic expanding hematoma is a rare condition that develops after surgery, trauma, or injury. It can also develop at any location in the body in the absence of trauma. Clinical findings and various diagnostic imaging modalities can aid in the differential diagnosis of this condition. In general, hematomas are naturally reabsorbed and rarely cause serious problems. However, hematomas that develop slowly without a history of trauma, surgery, or bleeding disorders could be difficult to differentiate from soft tissue neoplasms. In the present case, we describe a patient, without any history or physical evidence of trauma, who exhibited a large chronic expanding hematoma in the retroperitoneal space that resulted in hydronephrosis because of the pressure exerted on the left ureter. A 69-year-old man presented to our hospital with a swollen lesion in the left flank. A mass, 19 cm in diameter, was detected in the retroperitoneal space by computed tomography. We suspected the presence of a chronic expanding hematoma, soft tissue tumor, or left renal artery aneurysm. Surgical treatment was performed. However, postoperative histopathological examination indicated that the mass was a nonmalignant chronic expanding hematoma. No recurrence was observed during a 2-year follow-up period. In patients without a history of trauma who present slowly growing masses, the differential diagnosis should include chronic expanding hematoma in addition to cysts and soft tissue tumors. Moreover, the use of magnetic resonance imaging and computed tomography is essential to differentiate between chronic expanding hematoma and soft tissue tumors.

  15. DNA-induced inter-particle cross-linking during expanded bed adsorption chromatography - Impact on future support design

    DEFF Research Database (Denmark)

    Theodossiou, Irini; Thomas, Owen R. T.

    2002-01-01

    We have investigated the effects of adsorbent size, ionic capacity and surface immobilised polymers on dynamic capacity and changes occurring to beds of anion-exchangers during the binding of DNA. During application of low concentrations of "3-20 kilobase" calf thymus DNA feeds to expanded beds o...... exhibited a three-fold higher tendency to interact with neighbouring particles in the presence of DNA than that of the dextran DEAE support. The implications of these findings on the design of future expanded bed materials for separation of both proteins and nucleic acids are discussed....

  16. Modeling Large Deformation and Failure of Expanded Polystyrene Crushable Foam Using LS-DYNA

    Directory of Open Access Journals (Sweden)

    Qasim H. Shah

    2014-01-01

    Full Text Available In the initial phase of the research work, quasistatic compression tests were conducted on the expanded polystyrene (EPS crushable foam for material characterisation at low strain rates (8.3×10-3~8.3×10-2 s−1 to obtain the stress strain curves. The resulting stress strain curves are compared well with the ones found in the literature. Numerical analysis of compression tests was carried out to validate them against experimental results. Additionally gravity-driven drop tests were carried out using a long rod projectile with semispherical end that penetrated into the EPS foam block. Long rod projectile drop tests were simulated in LS-DYNA by using suggested parameter enhancements that were able to compute the material damage and failure response precisely. The material parameters adjustment for successful modelling has been reported.

  17. Life cycle inventory of sodium acetate and expanded graphite: Short report

    Energy Technology Data Exchange (ETDEWEB)

    Jungbluth, N. [ESU-Services Ltd., Uster (Switzerland); Nguyen, B. [Haute Ecole d' Ingenierie et de Gestion du canton de Vaud, Laboratoire d' Energetique Solaire et de Physique du BATiment, HEIG-VD / LESBAT, Yverdon-les-Bains (Switzerland)

    2008-07-01

    This short report for the Laboratory for Solar Energy and Building Physics at the University of Applied Sciences in Yverdon, Switzerland, takes a look at work being done on the issue of solar energy storage. The use of sodium acetate as a phase-change material is reviewed and considered as being a good way of optimising solar heating systems. The goal of this study was to assess if the energy gain resulting from the use of sodium acetate is balanced out or not by its embodied energy. The study investigated sodium acetate with and without expanded graphite. The paper discusses the life cycle inventory analysis of the two materials and provides some aggregated key indicators for further analysis. In general the ecoinvent methodology has been followed in order to achieve full consistency with the background data used and to provide an assessment of the materials' impact on the environment.

  18. Strategies for expanding health insurance coverage in vulnerable populations.

    Science.gov (United States)

    Jia, Liying; Yuan, Beibei; Huang, Fei; Lu, Ying; Garner, Paul; Meng, Qingyue

    2014-11-26

    evaluated the effects of strategies on increasing health insurance coverage for vulnerable populations. We defined strategies as measures to improve the enrolment of vulnerable populations into health insurance schemes. Two categories and six specified strategies were identified as the interventions. At least two review authors independently extracted data and assessed the risk of bias. We undertook a structured synthesis. We included two studies, both from the United States. People offered health insurance information and application support by community-based case managers were probably more likely to enrol their children into health insurance programmes (risk ratio (RR) 1.68, 95% confidence interval (CI) 1.44 to 1.96, moderate quality evidence) and were probably more likely to continue insuring their children (RR 2.59, 95% CI 1.95 to 3.44, moderate quality evidence). Of all the children that were insured, those in the intervention group may have been insured quicker (47.3 fewer days, 95% CI 20.6 to 74.0 fewer days, low quality evidence) and parents may have been more satisfied on average (satisfaction score average difference 1.07, 95% CI 0.72 to 1.42, low quality evidence).In the second study applications were handed out in emergency departments at hospitals, compared to not handing out applications, and may have had an effect on enrolment (RR 1.5, 95% CI 1.03 to 2.18, low quality evidence). Community-based case managers who provide health insurance information, application support, and negotiate with the insurer probably increase enrolment of children in health insurance schemes. However, the transferability of this intervention to other populations or other settings is uncertain. Handing out insurance application materials in hospital emergency departments may help increase the enrolment of children in health insurance schemes. Further studies evaluating the effectiveness of different strategies for expanding health insurance coverage in vulnerable population are

  19. Interplay between materials and microfluidics

    Science.gov (United States)

    Hou, Xu; Zhang, Yu Shrike; Santiago, Grissel Trujillo-De; Alvarez, Mario Moisés; Ribas, João; Jonas, Steven J.; Weiss, Paul S.; Andrews, Anne M.; Aizenberg, Joanna; Khademhosseini, Ali

    2017-04-01

    Developments in the field of microfluidics have triggered technological revolutions in many disciplines, including chemical synthesis, electronics, diagnostics, single-cell analysis, micro- and nanofabrication, and pharmaceutics. In many of these areas, rapid growth is driven by the increasing synergy between fundamental materials development and new microfluidic capabilities. In this Review, we critically evaluate both how recent advances in materials fabrication have expanded the frontiers of microfluidic platforms and how the improved microfluidic capabilities are, in turn, furthering materials design. We discuss how various inorganic and organic materials enable the fabrication of systems with advanced mechanical, optical, chemical, electrical and biointerfacial properties — in particular, when these materials are combined into new hybrids and modular configurations. The increasing sophistication of microfluidic techniques has also expanded the range of resources available for the fabrication of new materials, including particles and fibres with specific functionalities, 3D (bio)printed composites and organoids. Together, these advances lead to complex, multifunctional systems, which have many interesting potential applications, especially in the biomedical and bioengineering domains. Future exploration of the interactions between materials science and microfluidics will continue to enrich the diversity of applications across engineering as well as the physical and biomedical sciences.

  20. The LEP project of CERN must expand the knowledge of materials

    CERN Document Server

    Madsen, J H B

    1981-01-01

    The LEP (large electron positron storage ring) project of CERN is planned to produce very high energy particles. The history of the development of the present site is outlined. The new machine has a peripheral acceleration track of 26.7 km with a maximum energy development of 125 GeV. Components of the LEP ring include a set of deflector magnets, magnetic lenses of quadrupole formation, an accelerator system, a vacuum system and a control system. Brief details of each are given. (0 refs).

  1. Compressive and flexural strength of expanded perlite aggregate mortar subjected to high temperatures

    Science.gov (United States)

    Zulkifeli, Muhamad Faqrul Hisham bin Mohd; Saman@Hj Mohamed, Hamidah binti Mohd

    2017-08-01

    Work on thermal resistant of outer structures of buildings is one of the solution to reduce death, damages and properties loss in fire cases. Structures protected with thermal resistant materials can delay or avoid failure and collapse during fire. Hence, establishment of skin cladding with advance materials to protect the structure of buildings is a necessary action. Expanded perlite is a good insulation material which can be used as aggregate replacement in mortar. This study is to study on mortar mechanical properties of flexural and compressive strength subjected to elevated temperatures using expanded perlite aggregate (EPA). This study involved experimental work which was developing mortar with sand replacement by volume of 0%, 10%, 20%, 30% and 40% of EPA and cured for 56 days. The mortars then exposed to 200°C, 400 °C, 700 °C and 1000 °C. Flexural and compressive strength of the mortar were tested. The tests showed that there were increased of flexural and compressive strength at 200°C, and constantly decreased when subjected to 400°C, 700°C and 1000 °C. There were also variation of strengths at different percentages of EPA replacement. Highest compressive strength and flexural strength recorded were both at 200 °C with 65.52 MPa and 21.34 MPa respectively. The study conclude that by using EPA as aggregate replacement was ineffective below elevated temperatures but increased the performance of the mortar at elevated temperatures.

  2. An Investigation of the Applicability and Limitations of the ORNL Expanded Plug Test

    Energy Technology Data Exchange (ETDEWEB)

    McAfee, Wallace J. [ORNL; Hemrick, James G. [ORNL

    2014-01-15

    The expanded plug test technique for measuring the circumferential tensile properties of irradiated nuclear fuel cladding was developed at Oak Ridge National Laboratory (ORNL) and has been used successfully in several applications. The primary advantage of this technique over other procedures is its simplicity for application in the complex hot cell environment. During the development stage, efforts were made to both qualify the technique as much as possible regarding its experimental application and to develop and validate the data reduction procedures. However, since this is a new technique, the technical community is cautious in adopting a procedure that has not been fully vetted. The purpose of this effort was to address several baseline issues regarding the applicability of the technique and the precision of the use of experimental expanded ring load-deformation data to calculate material circumferential stress-strain properties. The tests performed, in conjunction with the developed data reduction procedures, demonstrate good reliability in the prediction of ring material stress-strain behavior for several materials of widely different strengths.

  3. The new method of modifying the hydrophobic properties of expanded perlite

    Directory of Open Access Journals (Sweden)

    Vogt Elżbieta

    2017-01-01

    Full Text Available The progressive industrialization and development of the automotive industry is the cause of the increasing demand for chemical products, especially oil products. Unfortunately, during processing, transportation or storage of these products, they get very often into the environment causing pollution. The removal of the results of accidents is still a current problem. The techniques which employ various types of sorbents deserve special attention among the several methods of eliminating the effects of pollutions. Moreover, expanded hydrophobic perlite is an interesting material among sorbents which are used on a large scale. The new method of modifying the hydrophobic properties of expanded perlite, with the use of solutions of stearic acid in organic solvents, was presented. The perlite that was used in research was produced by the PerliPol registered partnership in Bełchatów. Hydrophobic properties of the obtained materials were determined on the basis of the results achieved due to the modified film flotation method, “floating on water” test and on the basis of the value of water retention for individual samples. All grain fractions of perlite obtained hydrophobic properties which were better than or comparable to the hydrophobic properties of the HydroPerl (PerlPol commercial material used to remove petroleum product pollution. The hydrophobization process significantly improved the adsorption capacity of modified perlite to petroleum product pollution.

  4. Evaluation of the stiffness characteristics of rapid palatal expander screws

    Directory of Open Access Journals (Sweden)

    Luca Lombardo

    2016-11-01

    Full Text Available Abstract Background The aim of this study is to evaluate the mechanical properties of the screws used for rapid expansion of the upper jaw. Methods Ten types of expansion screw were assessed, seven with four arms: Lancer Philosophy 1, Dentaurum Hyrax Click Medium, Forestadent Anatomic Expander type “S”, Forestadent Anatomic Expander type “S” for narrow palates, Forestadent Memory, Leone A 2620-10 with telescopic guide, and Leone A 0630-10 with orthogonal arms; and three with two arms: Dentaurum Variety S.P., Target Baby REP Veltri, and Leone A 362113. A test expander with the mean dimensions taken from measurements on a sample of 100 expanders was constructed for each screw. The test expanders were connected to the supports of an Instron 4467 (Instron Corp., USA mechanical testing machine equipped with a 500 N load cell, and the compression force exerted after each activation was measured. The mean forces expressed by the two- and four-arm expanders were then compared. Results After five activations, the forces expressed by the two-arm devices were double than those expressed by the four-arm devices on average (224 ± 59.9 N vs. 103 ± 32.9 N, and such values remained high after subsequent activations. Conclusions The expanders tested demonstrated stiffness characteristics compatible with opening of the palatine sutures in pre-adolescent patients. The stiffness of such devices can be further increased during the construction phase.

  5. Expanding the conduct of everyday life concept for psychological media research with children

    DEFF Research Database (Denmark)

    Chimirri, Niklas Alexander

    2013-01-01

    The concept conduct of everyday life has lately been discussed with regards to how children are engaged with participating in the manifold practices that constitute their daily living. They coordinate their actions with others (adults and children) in order to increasingly influence the conditions......, the article shows how the concept is fruitful for investigating how kindergarten children use media technologies for conducting their everyday lives in the mutually shared kindergarten practice. Finally, it argues that the concept needs to be expanded in order to comprehensively grasp the intersubjective...... and material mediatedness of an everyday life with media technologies....

  6. Panel 3 - material science

    Energy Technology Data Exchange (ETDEWEB)

    Sarrao, John L [Los Alamos National Laboratory; Yip, Sidney [MIT

    2010-01-01

    In the last decades, NNSA's national security challenge has evolved, and the role of simulation and computation has grown dramatically. The process of certifying nuclear weapons performance has changed from one based on integrated tests to science-based certification in which underground nuclear tests have been replaced by large-scale simulations, appropriately validated with fundamental experimental data. Further, the breadth of national security challenges has expanded beyond stewardship of a nuclear deterrent to a broad range of global and asymmetric threats. Materials challenges are central to the full suite of these national security challenges. Mission requirements demand that materials perform predictably in extreme environments -- high pressure, high strain rate, and hostile irradiation and chemical conditions. Considerable advances have been made in incorporating fundamental materials physics into integrated codes used for component certification. On the other hand, significant uncertainties still remain, and materials properties, especially at the mesoscale, are key to understanding uncertainties that remain in integrated weapons performance codes and that at present are treated as empirical knobs. Further, additional national security mission challenges could be addressed more robustly with new and higher performing materials.

  7. [Numerical modeling of shape memory alloy vascular stent's self-expandable progress and "optimized grid" of stent].

    Science.gov (United States)

    Xu, Qiang; Liu, Yulan; Wang, Biao; He, Jin

    2008-10-01

    Vascular stent is an important medical appliance for angiocardiopathy. Its key deformation process is the expandable progress of stent in the vessel. The important deformation behaviour corresponds to two mechanics targets: deformation and stress. This paper is devoted to the research and development of vascular stent with proprietary intellectual property rights. The design of NiTinol self-expandable stent is optimized by means of finite element software. ANSYS is used to build the finite element simulation model of vascular stent; the molding material is NiTinol shape memory alloy. To cope with the factors that affect the structure of stent, the shape of grid and so on, the self-expanding process of Nitinol stent is simulated through computer. By making a comparison between two kinds of stents with similar grid structure, we present a new concept of "Optimized Grid" of stent.

  8. Unilateral Outer Bow Expanded Cervical Headgear Force System: 3D Analysis Using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Allahyar Geramy

    2015-10-01

    Full Text Available Objectives: Headgears are among the effective orthodontic appliances to achieve treatment goals. Unilateral molar distal movement is sometimes needed during an orthodontic treat- ment, which can be achieved by an asymmetric headgear. Different unilateral headgears have been introduced. The main goal of this study was to analyze the force system of uni- lateral expanded outer bow asymmetric headgears by the finite element method (FEM.Materials and Methods: Six 3D finite element models of a mesiodistal slice of the maxilla containing upper first molars, their periodontal ligaments (PDLs, cancellous bone, cortical bone, and a cervical headgear with expanded outer bow attached to maxillary first molars were designed in SolidWorks 2010 and meshed in ANSYS Workbench ver. 12.1. The mod- els were the same except for the degree of outer bow expansion. The outer bow ends were loaded with 2-Newton force. The distal driving force and the net moment were evaluated.Results: A decrease in the distalizing force in the normal side molar from 1.69 N to 1.37 N was shown by increasing the degree of unilateral expansion. At the same time, the force increased from 2.19 N to 2.49 N in the expanded side molar. A net moment increasing from 2.26 N.mm to 4.64 N.mm was also shown.Conclusion: Unilateral outer bow expansion can produce different distalizing forces in mo- lars, which increase by increasing the expansion.

  9. Enhancing results : solid expandable tubulars facilitate high-temperature oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Noel, G.; Nylund, J.; Flaming, S. [Enventure Global Technology LLC, Calgary, AB (Canada)

    2010-07-01

    Steam-based recovery methods can provide a cost-effective approach to developing heavy oil and oil sands energy resources. This paper described a solid expandable tubular system designed to prevent damage without decreases in hole size. The pipe's permanent deformation creates an energized seal that cases off damaged tubulars. The new sealing systems allow for operations in the range of 270 degrees C. The system was comprised of mechanical retainers designed to hold the multi-component, high-temperature seal in place on the expandable casing. The seals are held in place by retainer rings designed to protect the seal in the hole as well as to provide increased anchoring capacity when the pipe is expanded and clad onto the base casing. The retainers are wrapped with a redundant standard seal material. The weight and size of the casings are individually configured for specific wells and are also designed to maintain consistency across multiple weight ranges. Details of the testing protocol used to ensure that the sealing system operated well in various oil production scenarios were presented, as well as the results of case studies conducted to demonstrate the system in the field. 6 refs., 1 tab., 2 figs.

  10. The technique of sand control with expandable screens

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, P. [Petrochina, Liaohe (China). Liaohe Oilfield Co.

    2009-07-01

    Sand production in heavy oil reservoirs can limit the normal production of oil wells. In this study, expandable screens were used as a sand control mechanism by filtering the sand as it entered the wellbore. The screen systems consists of an expandable outer housing, an expandable base pipe and a filtering layer. The screen expands radially through an expandable cone and presses into the casing well. Axial tension is used to shrink the screens radially through a fishing anchor in order to remove them from the well. The lack of a sand ring between the screen and the casing increases the flow area of the oil and reduces flow resistance caused by fine silt blockages. A series of laboratory experiments were conducted to study the expansion and shrinkage properties of the screens. A field test conducted at a well located in the Liaohe oilfield in China demonstrated that good sand control results can be obtained without the need for pump checking. It was concluded that the sand control method is easy to use and provides good sand control results in large open flow areas. 2 refs., 2 tabs., 3 figs.

  11. Expanded R&D by Jet-engine-steering Revolution

    Science.gov (United States)

    Gal-Or, Benjamin

    2017-11-01

    Since 1987 [1,2,3,4,5] the global jet engine community is facing the historical fact that jet engine steering is gradually replacing canards and the common, often dangerous and obsolete, aerodynamic-only flight control - a fact that (i) has already affected the defense-industrial complex in the US, Russia, China, Japan, S-Korea and India, (ii) has integrated the traditional jet-engine components R&D with advanced aero-electro-physics, stealth technology, thrust vectoring aerodynamics and material science. Moreover, this military revolution is historically due to expand into the civil transport jets domain, [6,7,8,9]. The historical aim of the JES-Revolution remains the same: Replace the common, stall-spin sensitive canards [6] and Aerodynamic-Only-Obsolete-Flight Control ("AOOF Control"). Invented about 100 years ago for propeller-driven air vehicles, it has already been partially replaced for failure to function in WVR-combat post-stall domain, and for the following reasons: In comparison with complete Tail-Less, Canard-Less, Stealth-JES (Figure 5 and References [1,2,3,4,5,6]), the common AOOF Control increases drag, weight, fuel consumption, complexity, cost, and reduces flight safety, stealth, [Low Detectability] and provides zero post-stall, WVR air combat capability while its CANARDS KILL LD & REDUCE JES. Examples of stealth fighter aircraft that have already replaced canards and AOOF-Control where JES provides at least 64 to 0 KILL-RATIO advantage over AOOF-Controlled conventional fighter aircraft: The U.S. JES F-22 and, apparently, the Russian JES-Su-T-50 & 35S, China 2016-J-31, Indian HAL AMCA & FGFA, Japanese JES IHHI ATD-X, S-Korean JES KF-X. Cf. X-44 in Figure 5. Consequently, the jet engine is no longer defined as providing only brute force forward. Instead, it successfully competes with and wins over the wrong, dominating AOOF-Control, at least as a backup flight control whose sole factual domain is currently a well-established, primary flight

  12. Expanded benefits for humanity from the International Space Station

    Science.gov (United States)

    Rai, Amelia; Robinson, Julie A.; Tate-Brown, Judy; Buckley, Nicole; Zell, Martin; Tasaki, Kazuyuki; Karabadzhak, Georgy; Sorokin, Igor V.; Pignataro, Salvatore

    2016-09-01

    examples of materials improvements that are being developed using data from ISS. The publication also expands the benefits of research results in human health, environmental change and disaster response and in education activities developed to capture student imaginations in support of science, technology, engineering and mathematics, or STEM, education internationally. Applications to human health of the knowledge gained on ISS continue to grow and improve healthcare technologies and our understanding of human physiology. Distinct benefits return to Earth from the only orbiting multi-disciplinary laboratory of its kind. The ISS is a stepping stone for future space exploration by providing findings that develop LEO and improve life on our planet.

  13. Expanded Benefits for Humanity from the International Space Station

    Science.gov (United States)

    Rai, Amelia; Robinson, Julie A.; Tate-Brown, Judy; Buckley, Nicole; Zell, Martin; Tasaki, Kazuyuki; Karabadzhak, Georgy; Sorokin, Igor V.; Pignataro, Salvatore

    2016-01-01

    examples of materials improvements that are being developed using data from ISS. The publication also expands the benefits of research results in human health, environmental change and disaster response and in education activities developed to capture student imaginations in support of science, technology, engineering and mathematics, or STEM, education internationally. Applications to human health of the knowledge gained on ISS continues to grow and improve healthcare technologies and our understanding of human physiology. Distinct benefits return to Earth from the only orbiting multi-disciplinary laboratory of its kind. The ISS is a stepping stone for future space exploration by providing findings that develop LEO and improve life on our planet.

  14. Physical foundations of materials science

    CERN Document Server

    Gottstein, Günter

    2004-01-01

    In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them Transmission Electron Microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as "textures" are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.

  15. Vibrational damping of composite materials

    Science.gov (United States)

    Biggerstaff, Janet M.

    The purpose of this research was to develop new methods of vibrational damping in polymeric composite materials along with expanding the knowledge of currently used vibrational damping methods. A new barrier layer technique that dramatically increased damping in viscoelastic damping materials that interacted with the composite resin was created. A method for testing the shear strength of damping materials cocured in composites was developed. Directional damping materials, where the loss factor and modulus could be tailored by changing the angle, were produced and investigated. The addition of particles between composite prepreg layers to increase damping was studied. Electroviscoelastic materials that drastically changed properties such as loss factor and modulus with an applied voltage were manufactured and tested.

  16. Training Materials for Release 3

    DEFF Research Database (Denmark)

    Wake, Jo Dugstad; Hansen, Cecilie; Debus, Kolja

    This document, D7.4 – training materials for release 3, provides an overview of the training material for version 3 of the NEXT-TELL tools and methods. Previous documents submitted as part of work package 7, which is about teacher training, are D7.1 – Training Concept, D7.2 – Training Materials...... for Release 1 and D7.3 – Training Materials for Release 2. D7.4 builds on D7.1 and D7.2 and D7.3. D7.4 contains further development of previous work within WP7, essentially a revised theoretical approach to the teacher training, and expansion of the notion of tool training. The media in use have been expanded......, and the digitalisation of the support material through Moodle courses has been further refined....

  17. Expandable Total Humeral Replacement in a Child with Osteosarcoma

    Directory of Open Access Journals (Sweden)

    Eric R. Henderson

    2015-01-01

    Full Text Available Case. A right-handed 8-year-old female patient presented with a conventional, high-grade osteosarcoma involving her right humerus; through-shoulder amputation was recommended. After consultation, total humerus resection with expandable, total humeral endoprosthesis reconstruction was performed with a sleeve to encourage soft-tissue ingrowth. At three-year follow-up she has received one lengthening procedure and her functional scores are excellent. Conclusion. Total humeral resection and replacement in the pediatric population are rare and although early reports of expandable total humeral endoprosthesis outcomes demonstrate high failure rates, this patient’s success indicates that expandable total humeral replacement is a viable option.

  18. Expanded bed adsorption of an alkaline lipase from Pseudomona cepacia.

    Science.gov (United States)

    da Silva Padilha, Giovana; Curvelo-Santana, José Carlos; Alegre, Ranulfo Monte; Tambourgi, Elias Basile

    2009-02-15

    An extracellular lipase was isolated from Pseudomona cepacia by expanded bed adsorption on an Amberlite 410 ion-exchange resin. Enzyme characterization and hydrodynamic study of a chromatography column were done. Enzyme purification was done at three condition of expanded bed height (H): at one and half (6cm), at two (8cm) and at three (12cm) times the fixed bed height (H(0)=4cm). The results showed that the experimental data was fitted to the Richardson and Zaki equation, and the comparison between the experimental and calculated terminal velocities showed low relative error. In enzyme purification for better condition, a purification factor of about 80 times was found at 6cm of expanded bed height, or 1.5 times of expansion degree. Purified lipase had an optimal pH and a temperature of 8 and 37 degrees C, respectively.

  19. Financial Burdens and Economic Costs in Expanding Urban Water Systems

    Science.gov (United States)

    Moreau, David H.; Snyder, Thomas P.

    1987-07-01

    Rates of growth of demand, lengths of financing periods, real interest rates, and the types of facilities are shown to be important variables in evaluating the equity (or inequity) between established residents and new-development residents when urban water and sewer facilities are expanded with public financing. Established residents pay less than the economic cost of facilities when facilities that can be efficiently expanded in an incremental manner are subject to demands that are growing at rates that are less than the real interest rate. They pay more than the economic cost when growth occurs at higher rates. When facilities are expanded at multiyear intervals with excess capacity, payments are equated to costs at lower growth rates. Similarly, increasing real costs of facilities shift that breakpoint to lower growth rates. Modest one-time changes can be used to offset burdens on established residents when inequities do occur. Inflation has little effect on these results.

  20. Can microcarrier-expanded chondrocytes synthesize cartilaginous tissue in vitro?

    Science.gov (United States)

    Surrao, Denver C; Khan, Aasma A; McGregor, Aaron J; Amsden, Brian G; Waldman, Stephen D

    2011-08-01

    Tissue engineering is a promising approach for articular cartilage repair; however, it is challenging to produce adequate amounts of tissue in vitro from the limited number of cells that can be extracted from an individual. Relatively few cell expansion methods exist without the problems of de-differentiation and/or loss of potency. Recently, however, several studies have noted the benefits of three-dimensional (3D) over monolayer expansion, but the ability of 3D expanded chondrocytes to synthesize cartilaginous tissue constructs has not been demonstrated. Thus, the purpose of this study was to compare the properties of engineered cartilage constructs from expanded cells (monolayer and 3D microcarriers) to those developed from primary chondrocytes. Isolated bovine chondrocytes were grown for 3 weeks in either monolayer (T-Flasks) or 3D microcarrier (Cytodex 3) expansion culture. Expanded and isolated primary cells were then seeded in high density culture on Millicell™ filters for 4 weeks to evaluate the ability to synthesize cartilaginous tissue. While microcarrier expansion was twice as effective as monolayer expansion (microcarrier: 110-fold increase, monolayer: 52-fold increase), the expanded cells (monolayer and 3D microcarrier) were not effectively able to synthesize cartilaginous tissue in vitro. Tissues developed from primary cells were substantially thicker and accumulated significantly more extracellular matrix (proteoglycan content: 156%-292% increase; collagen content: 70%-191% increase). These results were attributed to phenotypic changes experienced during the expansion phase. Monolayer expanded chondrocytes lost their native morphology within 1 week, whereas microcarrier-expanded cells were spreading by 3 weeks of expansion. While the use of 3D microcarriers can lead to large cellular yields, preservation of chondrogenic phenotype during expansion is required in order to synthesize cartilaginous tissue.

  1. Scalar-Tensor Black Holes Embedded in an Expanding Universe

    Science.gov (United States)

    Tretyakova, Daria; Latosh, Boris

    2018-02-01

    In this review we focus our attention on scalar-tensor gravity models and their empirical verification in terms of black hole and wormhole physics. We focus on a black hole, embedded in an expanding universe, describing both cosmological and astrophysical scales. We show that in scalar-tensor gravity it is quite common that the local geometry is isolated from the cosmological expansion, so that it does not backreact on the black hole metric. We try to extract common features of scalar-tensor black holes in an expanding universe and point out the gaps that must be filled.

  2. Expanding the Model of Organizational Learning: Scope, Contingencies, and Dynamics

    Directory of Open Access Journals (Sweden)

    Barbara Grah

    2016-05-01

    Full Text Available Our paper seeks to contribute to the understanding of organizational learning by (a integrating existing models of organizational learning into a single model and (b expanding the model to include inter-organizational learning, adding key contingencies suggested by the growing literature on neuroleadership, and incorporating a process dimension to reflect the fact that organizational learning is continuous and dynamic. The resulting expanded model of organizational learning encompasses four levels on which learning can occur: individual, team, organizational, and inter-organizational. The overall validity of the model is illustrated by applying it to two knowledge-intensive Slovenian firms. Implications for theory and practice are discussed.

  3. Chronic expanding hematoma of thorax extended to the neck.

    Science.gov (United States)

    Ueda, Hitoshi; Baba, Hiromitsu; Ondo, Kaoru

    2014-01-01

    We report a rare case of chronic expanding hematoma of thorax extended to the neck. An 83-year-old man with a history of Lucite ball plombage and thoracoplasty of bilateral thorax was admitted with numbness of left upper extremity. In 6 months, left supraclavicular fossa was gradually bulged like tumor. The lesion was diagnosed as chronic expanding hematoma. Surgically, Lucite balls were removed with surrounding hematoma debris and fluid, and neck hematoma, which was slightly communicated to the thorax, was extirpated. We discussed the genesis of this hematoma and its extension to the neck.

  4. Scalar-Tensor Black Holes Embedded in an Expanding Universe

    Directory of Open Access Journals (Sweden)

    Daria Tretyakova

    2018-02-01

    Full Text Available In this review, we focus our attention on scalar-tensor gravity models and their empirical verification in terms of black hole and wormhole physics. We focus on black holes, embedded in an expanding universe, describing both cosmological and astrophysical scales. We show that in scalar-tensor gravity it is quite common that the local geometry is isolated from the cosmological expansion, so that it does not backreact on the black hole metric. We try to extract common features of scalar-tensor black holes in an expanding universe and point out the issues that are not fully investigated.

  5. Sound absorption study of raw and expanded particulate vermiculites

    Science.gov (United States)

    Vašina, Martin; Plachá, Daniela; Mikeska, Marcel; Hružík, Lumír; Martynková, Gražyna Simha

    2016-12-01

    Expanded and raw vermiculite minerals were studied for their ability to absorb sound. Phase and structural characterization of the investigated vermiculites was found similar for both types, while morphology and surface properties vary. Sound waves reflect in wedge-like structure and get minimized, and later are absorbed totally. We found that thanks to porous character of expanded vermiculite the principle of absorption of sound into layered vermiculite morphology is analogous to principle of sound minimization in "anechoic chambers." It was found in this study that the best sound damping properties of the investigated vermiculites were in general obtained at higher powder bed heights and higher excitation frequencies.

  6. Esophagojejunal anastomotic leak managed with self expandable metallic stent

    Directory of Open Access Journals (Sweden)

    Arvind Madurandagam Annapillai

    2013-01-01

    Full Text Available Esophagealjejunal anastomotic leak after gastrectomy is a serious surgical emergency with high mortality. This report describes a 57-year-old male with esophagojejunal anastomotic leak following total gastrectomy for gastric cancer and was managed successfully with self-expandable metallic stent. To our knowledge this is the first such report from India. This case report highlights the need of interdisciplinary coordination in managing this difficult clinical situation. Endotherapy with self-expandable metallic stent (SEM provided twin benefits of improving respiratory embarrassment and the joy of eating. Therapy of such difficult cases must be individualized; however, and SEM stent usage is a viable option

  7. Predicting paravalvular leak after balloon-expandable TAVR.

    Science.gov (United States)

    Krishnaswamy, Amar; Tuzcu, E Murat

    2015-07-01

    Objective measurement of a Valve Calcification Index (calcium volume/BSA) may predict PVL after TAVR using a cutoff value > 418 mm(3) /mm(2) Oversizing the balloon-expandable SAPIEN valve with a goal ratio of valve diameter: average annulus diameter > 1.055 may reduce PVL after TAVR Single parameters are unlikely to provide adequate sensitivity to reduce PVL; a thorough analysis of root sizing, calcification, and morphology is important to balloon-expandable TAVR safety and efficacy. © 2015 Wiley Periodicals, Inc.

  8. Experimental measurements and evaluation of the expanded water repellent perlite used for the cargo containment system of LNG carrier

    Science.gov (United States)

    Li, Manfeng; Ju, Yonglin

    2017-10-01

    To minimize the water absorption and to improve the thermal insulated properties of the insulation materials used for the cargo containment systems (CCSs) of LNG carrier, a kind of expanded water-repellent perlite has been developed by coating hydrophobic membrane onto the outer surface of the expanded perlite to change its physical and chemical characteristics. Considering the CCSs operated in a wide temperature range from environmental temperature to cryogenic temperature, the thermal analysis has been conducted to quantitatively determine the thermal insulted properties of the insulation materials. Furthermore, a double-sided guarded hot plate apparatus (GHP) is specifically designed and fabricated for the measurement of the thermal conductivities of the insulation specimens operated down to liquid nitrogen temperature. The breakage ratio associated with the water absorption and the thermal conductivity of the expanded water-repellent perlite is firstly proposed, and then a series of experiments are carried out to determine the thermal conductivity of the expanded water-repellent perlite ranging from room temperature to cryogenic temperature based on the different breakage ratios.

  9. Material and process selection using product examples

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2001-01-01

    a search engine, and through hyperlinks can relevant materials and processes be explored. Realising that designers are very sensitive to user interfaces do all descriptions of materials, processes and products include graphical descriptions, i.e. pictures or computer graphics....... that designers often limit their selection of materials and processes to a few well-known ones. Designers need to expand the solution space by considering more materials and processes. But they have to be convinced that the materials and processes are likely candidates that are worth investing time in exploring...

  10. Material and process selection using product examples

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2002-01-01

    a search engine, and through hyperlinks can relevant materials and processes be explored. Realising that designers are very sensitive to user interfaces do all descriptions of materials, processes and products include graphical descriptions, i.e. pictures or computer graphics....... that designers often limit their selection of materials and processes to a few well-known ones. Designers need to expand the solution space by considering more materials and processes. But they have to be convinced that the materials and processes are likely candidates that are worth investing time in exploring...

  11. Periodontal materials

    National Research Council Canada - National Science Library

    Darby, I

    2011-01-01

    .... However, the last 30 years have seen the development of materials used in regeneration of the periodontal tissues following periodontal disease, guided tissue regeneration, and the use of these materials in bone...

  12. Analytic materials.

    Science.gov (United States)

    Milton, Graeme W

    2016-11-01

    The theory of inhomogeneous analytic materials is developed. These are materials where the coefficients entering the equations involve analytic functions. Three types of analytic materials are identified. The first two types involve an integer p. If p takes its maximum value, then we have a complete analytic material. Otherwise, it is incomplete analytic material of rank p. For two-dimensional materials, further progress can be made in the identification of analytic materials by using the well-known fact that a 90(°) rotation applied to a divergence-free field in a simply connected domain yields a curl-free field, and this can then be expressed as the gradient of a potential. Other exact results for the fields in inhomogeneous media are reviewed. Also reviewed is the subject of metamaterials, as these materials provide a way of realizing desirable coefficients in the equations.

  13. Hazardous materials

    Science.gov (United States)

    ... words like: Acid Alkali Carcinogenic Caution Corrosive Danger Explosive Flammable Irritant Radioactive Unstable Warning A label called the Material Safety Data Sheet (MSDS) will tell you if a material is ...

  14. Contrast Materials

    Science.gov (United States)

    ... safe are contrast materials? Contrast materials are safe drugs; adverse reactions ranging from mild to severe do occur but ... the use of medications such as Beta blockers , NSAIDs , interleukin 2 having received a large amount of ...

  15. Contracting, equal, and expanding learning schedules: the optimal distribution of learning sessions depends on retention interval.

    Science.gov (United States)

    Küpper-Tetzel, Carolina E; Kapler, Irina V; Wiseheart, Melody

    2014-07-01

    In laboratory and applied learning experiments, researchers have extensively investigated the optimal distribution of two learning sessions (i.e., initial learning and one relearning session) for the learning of verbatim materials. However, research has not yet provided a satisfying and conclusive answer to the optimal scheduling of three learning sessions (i.e., initial learning and two relearning sessions) across educationally relevant time intervals. Should the to-be-learned material be repeated at decreasing intervals (contracting schedule), constant intervals (equal schedule), or increasing intervals (expanding schedule) between learning sessions? Different theories and memory models (e.g., study-phase retrieval theory, contextual variability theory, ACT-R, and the Multiscale Context Model) make distinct predictions about the optimal learning schedule. We discuss the extant theories and derive clear predictions from each of them. To test these predictions empirically, we conducted an experiment in which participants studied and restudied paired associates with a contracting, equal, or expanding learning schedule. Memory performance was assessed immediately, 1 day, 7 days, or 35 days later with free- and cued-recall tests. Our results revealed that the optimal learning schedule is conditional on the length of the retention interval: A contracting learning schedule was beneficial for retention intervals up to 7 days, but both equal and expanding learning schedules were better for a long retention interval of 35 days. Our findings can be accommodated best by the contextual variability theory and indicate that revisions are needed to existing memory models. Our results are practically relevant, and their implications for real-world learning are discussed.

  16. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    materials. Numerical procedures are outlined which facilitate the practical analysis of any feature considered in this book. Examples are presented which illustrate the analysis of well-known materials such as concrete, hardening cement paste, ceramics, tile, wood, impregnated and reinforced materials...

  17. Hubble Diagram Test of Expanding and Static Cosmological Models: The Case for a Slowly Expanding Flat Universe

    Directory of Open Access Journals (Sweden)

    Laszlo A. Marosi

    2013-01-01

    Full Text Available We present a new redshift (RS versus photon travel time ( test including 171 supernovae RS data points. We extended the Hubble diagram to a range of z = 0,0141–8.1 in the hope that at high RSs, the fitting of the calculated RS/ diagrams to the observed RS data would, as predicted by different cosmological models, set constraints on alternative cosmological models. The Lambda cold dark matter (ΛCDM, the static universe model, and the case for a slowly expanding flat universe (SEU are considered. We show that on the basis of the Hubble diagram test, the static and the slowly expanding models are favored.

  18. Polyurethane-coated, self-expandable biliary stent: an experimental study.

    Science.gov (United States)

    Severini, A; Mantero, S; Tanzi, M C; Cigada, A; Salvetti, M; Cozzi, G; Motta, A

    1995-12-01

    We describe a self-expanding metallic biliary Gianturco-Rösch stent coated with polymeric material. The coating was designed to prevent the growth of neoplastic and reactive tissue within the biliary ducts. The stents were coated with a solvent-casting technique, which consists of dissolving polyurethane (polyether urethane or polycarbonate urethane) pellets in a solvent (dimethylacetamide), dipping the stent in the solution, and completely evaporating the solvent. In vitro mechanical characterization of the stent was performed to determine the adhesion of the coating to the metallic cage, the best introducer caliber for implantation of the device, and the relationship between the stent's diameter and radial stress. Reports in the literature on the biostability of polycarbonate urethane compared with polyether urethane prompted us to use the former material to coat the stents. The solvent technique gives a smooth internal surface of the stent wall, leaving in relief the coated structure of the stent on the external surface. The functional tests demonstrated that the coating did not compromise the original characteristics of the stent in terms of self-expandability, axial flexibility, and increased radial rigidity of the device. Functional tests verified coating stability and device handling, which are the first steps toward in vivo experimentation.

  19. Characterization of composites based on expanded polystyrene wastes and wood flour.

    Science.gov (United States)

    Poletto, Matheus; Dettenborn, Juliane; Zeni, Mara; Zattera, Ademir J

    2011-04-01

    This paper aims to evaluate the potential for the use of recycled expanded polystyrene and wood flour as materials for the development of wood plastic composites. The effects of wood flour loading and coupling agent addition on the mechanical properties and morphology of wood thermoplastic composites were examined. In addition, a methodology for the thermo-mechanical recycling of expanded polystyrene waste was developed. The results show that the mechanical properties decreased as the wood flour loading increased. On the other hand, the use of poly(styrene-co-maleic anhydride), SMA, as a coupling agent improved the compatibility between the wood flour and polystyrene matrix and the mechanical properties subsequently improved. A morphological study revealed the positive effect of the coupling agent on the interfacial bonding. The density values obtained for the composites were compared with the theoretical values and showed agreement with the rule of mixtures. Based on the findings of this work, it appears that both recycled materials can be used to manufacture composites with high mechanical properties and low density. Copyright © 2010 Elsevier Ltd. All rights reserved.

  20. A framework to expand public services to children with biomedical ...

    African Journals Online (AJOL)

    The study undertook the development of a framework for expanding the public services available to children with biomedical healthcare needs related to HIV in South Africa. The study consisted of various component projects which were depicted as phases. The first phase was a descriptive quantitative analysis of ...

  1. Expanded phenotype in a patient with spastic paraplegia 7.

    Science.gov (United States)

    Gass, Jennifer; Blackburn, Patrick R; Jackson, Jessica; Macklin, Sarah; van Gerpen, Jay; Atwal, Paldeep S

    2017-10-01

    Hereditary spastic paraplegia is a group of clinically and genetically heterogeneous neurodegenerative disorders, often characterized by weakness and spasticity in the lower limbs. In our study, we describe a spastic paraplegia type 7 patient with an expanded phenotype who was diagnosed after the discovery of pathogenic variants in SPG7.

  2. Expanding newborn screening programmes and strengthening informed consent

    NARCIS (Netherlands)

    Nijsingh, N.M.

    2012-01-01

    Part I offers the context to the claim that informed consent requirements need to be strengthened to the extent that newborn screening conveys more disadvantages relative to the advantages. This includes a discussion of the Dutch debate on expanding newborn screening. From this discussion it becomes

  3. 78 FR 37431 - Expanding America's Leadership in Wireless Innovation

    Science.gov (United States)

    2013-06-20

    ... Documents#0;#0; ] Memorandum of June 14, 2013 Expanding America's Leadership in Wireless Innovation... innovation, private investment, and smart policy has positioned the United States as the global leader in... promoting innovation and economic growth. Although existing efforts will almost double the amount of...

  4. Expanding the taxonomy of the diagnostic criteria for temporomandibular disorders

    NARCIS (Netherlands)

    Peck, C.C.; Goulet, J-P; Lobbezoo, F.; Schiffman, E.L.; Alstergren, P.; Anderson, G.C.; De Leeuw, R.; Jensen, R.; Michelotti, A.; Ohrbach, R.; Petersson, A.; List, T.

    2014-01-01

    There is a need to expand the current temporomandibular disorders' (TMDs) classification to include less common but clinically important disorders. The immediate aim was to develop a consensus-based classification system and associated diagnostic criteria that have clinical and research utility for

  5. Expanded Territories of "Literacy": New Literacies and Multiliteracies

    Science.gov (United States)

    Sang, Yuan

    2017-01-01

    Facing the radical change in society in the 21st century, the conventional view of literacy and literacy education may no longer satisfy students' needs in working and social lives, especially beyond classroom settings. Therefore, expanded territories of literacy have been proposed to better support teachers' and students' literacy education and…

  6. Fire Resistance of Concrete Constructions with Expanded Clay Aggregate

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    2003-01-01

    The paper describes briefly a series of full-scale tests made as documentation for extending the field of application of the reduced cross section method from the structural codes to constructions based on expanded clay aggregate. As a special result the tests verify that slabs with a short...

  7. Expanding the Functional Assessment Model for Naturalistic Intervention Design.

    Science.gov (United States)

    Evans, Ian M.

    2000-01-01

    This article comments on a study that used functional assessment to reduce behavior problems in a child with multiple disabilities (Kern and Vorndran, 2000). It suggests additional principles need to be incorporated into an expanded model if functional assessment is to have a truly positive influence on naturalistic treatment planning. (Contains…

  8. methanes using Expanded Perlite-PPA as a heterogeneous solid ...

    Indian Academy of Sciences (India)

    absorbed water molecules on the Expanded Perlite sur- face. The second step involves the decomposition of ..... (c) Fahy E, Potts B C M, Faulkner D J and Smith K. 1991 6-Bromotryptamine derivatives from the Gulf of ... Zhang C L and Du Z Q 2009 Synthesis of bis- indolylmethanes catalyzed by oxone Chin. Chem. Lett.

  9. THE USE OF TISSUE EXPANDERS IN HYPOSPADIAS CRIPPLES

    African Journals Online (AJOL)

    Objective: This procedure was introduced to evaluate the use of tissue expanders in pa- tients with complex anterior urethralstric- tures and hypospadias cripples where there is not enough healthy penile skin to bridge the urethral defect or to cover the neoure- thra. Patients and Methods: Six patients with a mean age of 23.3 ...

  10. Expanded clinical spectrum of enhanced S-cone syndrome

    NARCIS (Netherlands)

    Yzer, Suzanne; Barbazetto, Irene; Allikmets, Rando; van Schooneveld, Mary J.; Bergen, Arthur; Tsang, Stephen H.; Jacobson, Samuel G.; Yannuzzi, Lawrence A.

    2013-01-01

    New funduscopic findings in patients with enhanced S-cone syndrome (ESCS) may help clinicians in diagnosing this rare autosomal recessive retinal dystrophy. To expand the clinical spectrum of ESCS due to mutations in the NR2E3 gene. Retrospective, noncomparative case series of 31 patients examined

  11. Education Abroad for Students with Disabilities: Expanding Access

    Science.gov (United States)

    Soneson, Heidi M.; Fisher, Shelly

    2011-01-01

    Education abroad is a rapidly expanding opportunity for undergraduate students in the United States. Concurrent with this growth in total numbers is a growth in the diversity of participants. Students with different ethnic backgrounds, academic majors, age, socioeconomic status, and disabilities are increasingly seeking opportunities overseas. In…

  12. Gravitational Collapse and Structure Formation in an Expanding ...

    Indian Academy of Sciences (India)

    IAS Admin

    RESONANCE. September 2015. GENERAL ARTICLE. Gravitational Collapse and Structure Formation in an. Expanding Universe. J S Bagla and Pritpal Kaur Sandhu. Keywords. Cosmology, gravitational col- lapse, galaxy formation. (left) Jasjeet Bagla works at IISER Mohali. His research is mainly in the area of cosmology.

  13. Expanding horizons. Integrating environmental health in occupational health nursing.

    Science.gov (United States)

    Rogers, B; Cox, A R

    1998-01-01

    1. Environmental hazards are ubiquitous. Many exist in the workplace or occur as a result of work process exposures. 2. Environmental health is a natural component of the expanding practice of occupational health nursing. 3. AAOHN's vision for occupational and environmental health will continue to set the standard and provide leadership in the specialty.

  14. Enrichment in Massachusetts Expanded Learning Time (ELT) Schools. Issue Brief

    Science.gov (United States)

    Caven, Meghan; Checkoway, Amy; Gamse, Beth; Luck, Rachel; Wu, Sally

    2012-01-01

    This brief highlights key information about enrichment activities, which represent one of the main components of the Massachusetts Expanded Learning Time (ELT) initiative. Over time, the ELT initiative has supported over two dozen schools across the Commonwealth. A comprehensive evaluation of the ELT initiative found that implementation of the…

  15. Expanding Learning Opportunities for High School Students with Distance Learning

    Science.gov (United States)

    Beese, Jane

    2014-01-01

    The purpose of the Synchronous Interactive Video Conference Distance Learning pilot program was to use emerging technologies to expand learning opportunities for students at an urban public high school. Through grant funding, students were able to enroll in Advanced Placement and foreign language courses through an online learning provider. Using…

  16. The Expanded Food and Nutrition Education Program (EFNEP)

    Science.gov (United States)

    National Institute of Food and Agriculture, 2010

    2010-01-01

    Obesity, poor health, and limited physical activity are major health concerns. The Expanded Food and Nutrition Education Program (EFNEP) improves the health and well-being of limited resource families and youth. Additionally, EFNEP leads to public savings. Research shows that better health is associated with reduced health care costs, less…

  17. Diaspora, Migration, and Globalization: Expanding the Discourse of Adult Education

    Science.gov (United States)

    Alfred, Mary V.

    2015-01-01

    This article explores how notions of diaspora, migration, and globalization intersect to inform identities and social realities of those who leave their homeland and resettle in other nations. It calls for expanding the discourse of adult education to incorporate critical studies of the diaspora to make visible the inequality and imbalance of…

  18. Expanding the taxonomy of the diagnostic criteria for temporomandibular disorders

    DEFF Research Database (Denmark)

    Peck, C C; Goulet, J-P; Lobbezoo, F

    2014-01-01

    There is a need to expand the current temporomandibular disorders' (TMDs) classification to include less common but clinically important disorders. The immediate aim was to develop a consensus-based classification system and associated diagnostic criteria that have clinical and research utility f...

  19. Stability of a bubble expanding and translating through an inviscid ...

    Indian Academy of Sciences (India)

    A bubble expands adiabatically and translates in an incompressible and inviscid liquid. We investigate the number of equilibrium points of the bubble and the nature of stability of the bubble at these points. We find that there is only one equilibrium point and the bubble is stable there.

  20. Scaling up: Expanding the impact of food security and nutrition ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-10-06

    Oct 6, 2016 ... To increase food production; To raise incomes for farming families; To improve nutrition across the Global South. Together with its ... The social business is expanding from the 55 franchises currently serving 25,000 customers in Kenya to 150 franchises that will benefit 375,000 smallholder farmers by 2018.

  1. Validation of the Chinese Expanded Euthanasia Attitude Scale

    Science.gov (United States)

    Chong, Alice Ming-Lin; Fok, Shiu-Yeu

    2013-01-01

    This article reports the validation of the Chinese version of an expanded 31-item Euthanasia Attitude Scale. A 4-stage validation process included a pilot survey of 119 college students and a randomized household survey with 618 adults in Hong Kong. Confirmatory factor analysis confirmed a 4-factor structure of the scale, which can therefore be…

  2. Apprenticeship Programs Expand with Help of Community Colleges

    Science.gov (United States)

    Gonzalez, Jennifer

    2011-01-01

    The apprenticeship system, long considered an educational relic by some educators and policy makers, is gaining new attention as a model for improving job skills and meeting national college-completion goals. A number of states and community and technical colleges are working to strengthen and expand apprenticeship opportunities. They offer…

  3. Expanding the Role of Connectionism in SLA Theory

    Science.gov (United States)

    Language Learning, 2013

    2013-01-01

    In this article, I explore how connectionism might expand its role in second language acquisition (SLA) theory by showing how some symbolic models of bilingual and second language lexical memory can be reduced to a biologically realistic (i.e., neurally plausible) connectionist model. This integration or hybridization of the two models follows the…

  4. Expanding the Spanish Classroom: The "Art" in Liberal Arts

    Science.gov (United States)

    Díaz, Erin M.

    2016-01-01

    Supplementing the foreign language curriculum with the incorporation of art museum visits has benefits for students, faculty, the campus art gallery, and the institution. Such a collaborative program serves to expand the classroom and complement instruction by providing learners with a new space to engage in authentic practice in the target…

  5. Expanding Business Opportunities for African Youth in Agricultural ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Expanding Business Opportunities for African Youth in Agricultural Value Chains in Southern Africa (CultiAF). This project will develop and test novel, creative, and bold business models that increase the participation of youth in fish and maize post-harvest value chains in Malawi, Zambia, and Zimbabwe. African youth and ...

  6. A New Vertebral Body Replacement Strategy Using Expandable Polymeric Cages.

    Science.gov (United States)

    Liu, Xifeng; Paulsen, Alex; Giambini, Hugo; Guo, Ji; Miller, A Lee; Lin, Po-Chun; Yaszemski, Michael J; Lu, Lichun

    2017-03-01

    We have developed a novel polymeric expandable cage that can be delivered via a posterior-only surgical approach for the treatment of noncontained vertebral defects. This approach is less invasive than an anterior-only or combined approach and much more cost-effective than currently used expandable metal cages. The polymeric expandable cage is composed of oligo poly(ethylene glycol) fumarate (OPF), a hydrogel that has been previously shown to have excellent nerve and bone tissue biocompatibility. OPF hydrogel cages can expand to twice their original diameter and length within a surgical time frame following hydration. Modulation of parameters such as polymeric network crosslink density or the introduction of charge to the network allowed for precise expansion kinetics. To meet specific requirements due to size variations in patient vertebral bodies, we fabricated a series of molds with varied diameters and explored the expansion kinetics of the OPF cages. Results showed a stable expansion ratio of approximately twofold to the original size within 20 min, regardless of the absolute value of the cage size. Following implantation of a dried OPF cage into a noncontained vertebral defect and its in situ expansion with normal saline, other augmentation biomaterials, such as poly(propylene fumarate) (PPF), can be injected to the lumen of the OPF cage and allowed to crosslink in situ. The OPF/PPF composite scaffold can provide the necessary rigidity and stability to the augmented spine.

  7. Response to "Expanding Access to Learning with Mobile Digital Devices"

    Science.gov (United States)

    Vanek, Jen

    2017-01-01

    In his article "Expanding Access to Learning with Mobile Digital Devices" (EJ1150752), Jeff Carter recommended a balanced perspective when measuring the potential of mobile learning to redefine teaching and learning for adults with basic skills needs. In response to Carter's article, the author makes some recommendations that she thinks…

  8. Expanding Distribution of Lethal Amphibian Fungus Batrachochytrium salamandrivorans in Europe

    OpenAIRE

    Spitzen-van der Sluijs, Annemarieke; Asselberghs, Johan; Martel, An; Bales, Emma K.; Beukema, Wouter; Bletz, Molly C.; Dalbeck, Lutz; Goverse, Edo; Kerres, Alexander; Kinet, Thierry; Kirst, Kai; Laudelout, Arnaud; Marin da Fonte, Luis F.; Nöllert, Andreas; Ohlhoff, Dagmar

    2016-01-01

    Emerging fungal diseases can drive amphibian species to local extinction. During 2010-2016, we examined 1,921 urodeles in 3 European countries. Presence of the chytrid fungus Batrachochytrium salamandrivorans at new locations and in urodeles of different species expands the known geographic and host range of the fungus and underpins its imminent threat to biodiversity.

  9. Expanding Distribution of Lethal Amphibian Fungus Batrachochytrium salamandrivorans in Europe.

    Science.gov (United States)

    Spitzen-van der Sluijs, Annemarieke; Martel, An; Asselberghs, Johan; Bales, Emma K; Beukema, Wouter; Bletz, Molly C; Dalbeck, Lutz; Goverse, Edo; Kerres, Alexander; Kinet, Thierry; Kirst, Kai; Laudelout, Arnaud; Marin da Fonte, Luis F; Nöllert, Andreas; Ohlhoff, Dagmar; Sabino-Pinto, Joana; Schmidt, Benedikt R; Speybroeck, Jeroen; Spikmans, Frank; Steinfartz, Sebastian; Veith, Michael; Vences, Miguel; Wagner, Norman; Pasmans, Frank; Lötters, Stefan

    2016-07-01

    Emerging fungal diseases can drive amphibian species to local extinction. During 2010-2016, we examined 1,921 urodeles in 3 European countries. Presence of the chytrid fungus Batrachochytrium salamandrivorans at new locations and in urodeles of different species expands the known geographic and host range of the fungus and underpins its imminent threat to biodiversity.

  10. Expanding Distribution of Lethal Amphibian Fungus Batrachochytrium salamandrivorans in Europe

    OpenAIRE

    Spitzen-van der Sluijs, Annemarieke; Martel, An; et al, ...; Schmidt, B R

    2016-01-01

    Emerging fungal diseases can drive amphibian species to local extinction. During 2010–2016, we examined 1,921 urodeles in 3 European countries. Presence of the chytrid fungus Batrachochytrium salamandrivorans at new locations and in urodeles of different species expands the known geographic and host range of the fungus and underpins its imminent threat to biodiversity.

  11. Lattice expansion of carbon-stabilized expanded austenite

    DEFF Research Database (Denmark)

    Hummelshøj, Thomas Strabo; Christiansen, Thomas; Somers, Marcel A. J.

    2010-01-01

    The lattice parameter of expanded austenite was determined as a function of the content of interstitially dissolved carbon in homogeneous, carburized thin stainless steel foils. For the first time this expansion of the face-centered cubic lattice is determined on unstrained austenite. It is found...

  12. Expanding Access to Insurance by the Poor : Policy, Regulation and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Expanding Access to Insurance by the Poor : Policy, Regulation and Supervision of Micro Insurance. This project aims to facilitate poor people's access to insurance products and services as a means of addressing their vulnerability to risk. It will do so by carrying out case studies in five countries. Potential candidates ...

  13. Introduction: Expanding the boundaries of psychological resource theories

    NARCIS (Netherlands)

    M.J. Gorgievski-Duijvesteijn (Marjan); J.R.B. Halbesleben (Jonathon); A.B. Bakker (Arnold)

    2011-01-01

    textabstractAbstract This article introduces JOOP’s special section on expanding the boundaries of resource theories in Occupational and Organizational Psychology. After an introduction of the most relevant resource theories and their current application in Occupational and Organizational Psychology

  14. CSU Standard for the CLSI Expanded Title Record.

    Science.gov (United States)

    Anderson, Karen; And Others

    The revised system specifications described in this document were adopted by the 19 California State University and College (CSUC) libraries for a second test version of the CLSI "Expanded Title Record" public access online catalog at California State University at Chico. Should this pilot demonstration of the data format prove…

  15. CSUC Standard for the CLSI Expanded Title Record.

    Science.gov (United States)

    Case, Barbara; And Others

    The system specifications described have been adopted by the 19 California State University and Colleges Libraries for use with the CL Systems "Expanded Title Record" format. It is anticipated that these specifications will be tested at California State University, Chico, beginning midyear 1981. Should this pilot demonstration prove…

  16. Percutaneous transhepatic self-expanding metal stents for palliation ...

    African Journals Online (AJOL)

    Cancers of the pancreas, gallbladder and bile ducts are the commonest causes of malignant biliary obstruction. .... markers on the delivery catheter allow fluoroscopic control of stent release after positioning across the .... percutaneous biliary transhepatic self-expanding metal stent insertion was technically successful in all ...

  17. Expanding the Lexicon: The Case of Jordanian Arabic

    Science.gov (United States)

    Sa'aida, Zainab

    2016-01-01

    The aim of this study is to explore (non)morphological processes that native speakers of Jordanian Urban Arabic and Jordanian Rural Arabic use to expand their own lexicon. Three Jordanian female respondents were interviewed to collect data. The data consist of transcriptions of recorded tokens, which were categorised into groups according to the…

  18. Using Aesthetic Response, a Poetic Inquiry to Expand Knowing

    DEFF Research Database (Denmark)

    Gerge, Anna; Warja, Margareta; Pedersen, Inge Nygaard

    2017-01-01

    Using Aesthetic Response, a Poetic Inquiry to Expand Knowing Abstract: The Rx6-Method A simple step-wise research procedure of arts-based research (ABR) called the Rx6 method is presented. This ABR method is grounded in expressive arts therapy, heuristic inquiry, attachment theory and contemporary...

  19. Educated Japanese English: Expanding Oral/Aural Core Vocabulary

    Science.gov (United States)

    D'Angelo, James F.

    2005-01-01

    Having established the world's first undergraduate college of world Englishes, and in an "Expanding-Circle" setting, we have created the pilot environment for a new type of ELT curriculum. We must address the creation of a curriculum that is pervasively informed by the philosophy of world Englishes at both a macro and micro level.…

  20. Gravitational Clustering of Galaxies in an Expanding Universe ...

    Indian Academy of Sciences (India)

    2006-12-08

    Dec 8, 2006 ... Abstract. We inquire the phenomena of clustering of galaxies in an expanding universe from a theoretical point of view on the basis of ther- modynamics and correlation functions. The partial differential equation is developed both for the point mass and extended mass structures of a two-point correlation ...

  1. Expanding the English Medical Schools: The Politics of Knowledge Control

    Science.gov (United States)

    Salter, Brian; Filippakou, Ourania; Tapper, Ted

    2016-01-01

    Since 1997 there have been two concerted attempts to expand the number of medical school students in England: by increasing the size of existing medical schools, and by creating new medical schools. These initiatives have been a direct result of government policy, although policy implementation was delegated to the state apparatus. They also led…

  2. Application of a high density adsorbent in expanded bed adsorption ...

    African Journals Online (AJOL)

    The application of STREAMLINE Direct HST adsorbent in expanded bed adsorption of lipase from Burkholderia pseudomallei was explored in this study. Scouting of optimum binding and elution condition was performed in batch binding mode. The addition of 0.2 M salt in acetate buffer (pH 5) during adsorption has ...

  3. Dynamical 3-Space: Black Holes in an Expanding Universe

    Directory of Open Access Journals (Sweden)

    Rothall D. P.

    2013-10-01

    Full Text Available Black holes are usually studied without including effects of the expanding universe. However in some recent studies black holes have been embedded in an expanding universe, in order to determine the interplay, if any, of these two dynamical processes. Dynamical 3-space theory contains time independent solutions for black holes, which are spatial in-flows, and separately the time dependent Hubble expansion. This theory has explained numerous puzzles in observational astrophysics and contains 3 constants; G, - which from experimental data turns out to be the fine structure constant, and - which is a small but nonzero distance, possibly a Planck-type length. The Hubble expansion in the dynamical 3-space theory cannot be “switched o”, forcing the study, first, of isolated black holes coexisting with the expanding universe. It is shown that a time dependent black hole and expanding universe solution exists. The nature and implications of these solutions are discussed as they evolve over time. A dynamical network of black holes and induced linking cosmic filaments forming bubble structures is discussed, as a consequence of dynamical 3-space undergoing a dynamical breakdown of homogeneity and isotropy, even in the absence of baryonic matter.

  4. Gravitational Clustering of Galaxies in an Expanding Universe

    Indian Academy of Sciences (India)

    We inquire the phenomena of clustering of galaxies in an expanding universe from a theoretical point of view on the basis of thermodynamics and correlation functions. The partial differential equation is developed both for the point mass and extended mass structures of a two-point correlation function by using ...

  5. Strategies for Expanding Learning Opportunities for NESB Adult Literacy Learners.

    Science.gov (United States)

    Rado, Marta; Foster, Lois

    1995-01-01

    Explores two strategies for expanding learning opportunities for adult literacy learners that are not tied to formal instruction and unlimited finance. These strategies are the creative use of technology and reading circles which draw on the adult's capacity for independent learning and the bilingualism of the learners. (18 references) (Author/CK)

  6. Staged repair of giant exomphalos major using tissue expanders

    Directory of Open Access Journals (Sweden)

    R.S. Shah

    2016-10-01

    Full Text Available Giant exomphalos, also called hepato-omphalocele, is a major exodus of abdominal viscera. Due to the large discrepancy between abdominal domain and the volume of extra abdominal organs, these defects present a significant challenge to pediatric surgeons. A 10 month old boy with antenatally diagnosed exomphalos major had a giant exomphalos 15 × 15 × 10 cm in size. Investigations revealed significant visceroabdominal disproportion, in view of which staged repair of the exomphalos was planned. An intraperitoneal silicon tissue expander was inserted for this child in the infra-umbilical abdominal cavity with the flat surface in the recto-vesical pouch through pfannenstiel incision & gradually inflated. Subsequently, subcutaneous expanders were placed in both flanks using minimal access technique to get adequate healthy skin cover prior to final ventral hernia repair. At eight years of age, the patient underwent exploratory laparotomy with ventral hernia repair with meshplasty using dual surface mesh & had an excellent and prompt recovery. There are numerous surgical techniques for giant omphalocele closure, which fall into the categories of staged, and delayed closure. Uniqueness of this case is combined use of both intraperitoneal and subcutaneous tissue expansion with the aid of minimal access technique in placement of subcutaneous expanders. The combined use of both intra-abdominal & subcutaneous expanders has not yet been reported in children.

  7. Expanding Schooling Opportunities for 4-Year-Olds

    Science.gov (United States)

    Leuven, Edwin; Lindahl, Mikael; Oosterbeek, Hessel; Webbink, Dinand

    2010-01-01

    We use a novel quasi-experimental strategy to estimate the effect of expanding early schooling enrollment possibilities on early achievement. It exploits two features of the school system in The Netherlands. The first is rolling admissions; children are allowed to start school immediately after their 4th birthday instead of at the beginning of the…

  8. 2010 Impacts: The Expanded Food and Nutrition Education Program (EFNEP)

    Science.gov (United States)

    National Institute of Food and Agriculture, 2011

    2011-01-01

    Since 1969, the Expanded Food and Nutrition Education Program (EFNEP) has improved the diets and food-related behaviors of program participants. Each year EFNEP enrolls more than half a million new program participants. In 2010, EFNEP reached 137,814 adults and 463,530 youth directly and nearly 400,000 family members indirectly. This paper…

  9. [Latex covering and mechanical analysis of balloon expandable stents].

    Science.gov (United States)

    Marty, B; von Segesser, L K; Carrel, T; Turina, M

    1996-01-01

    To the moment a few stents of metallic coils or meshes are available with a sealing coverage. In the present study balloon-expandable stents have been covered with a thin layer of natural rubber latex. The physical properties of these impervious stents were compared to the conventional stents. The expansion, the loss of expansion and the deformity during and after balloon inflation have been analyzed. In the pressure zone of 4-6 bar the mechanical characteristics of the impervious stents were similar to the conventional stents. The stents were expanded at 100% related on the balloon diameter used for expansion. Additional pressure of 1 bar was necessary to expand the impervious stents. At balloon pressure below 4 bar the stents tied the balloons in the midzone. The impervious stents, expanded at 6, 8 and 10mm, underwent a loss of expansion of 10% after withdrawal of the balloons. Their configuration was barrel-shaped (4% central enlargement) due to the latex rubber, constricting the wire meshes at both ends. These preliminary results are encouraging and allow further investigations.

  10. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    This book deals with the mechanical and physical behavior of composites as influenced by composite geometry. "Composite Materials" provides a comprehensive introduction for researchers and students to modern composite materials research with a special emphasis on the significance of phase geometry....... The book enables the reader to a better understanding of the behavior of natural composites, improvement of such materials, and design of new materials with prescribed properties. A number of examples are presented: Special composite properties considered are stiffness, shrinkage, hygro-thermal behavior...... materials. Numerical procedures are outlined which facilitate the practical analysis of any feature considered in this book. Examples are presented which illustrate the analysis of well-known materials such as concrete, hardening cement paste, ceramics, tile, wood, impregnated and reinforced materials...

  11. Aerospace materials and material technologies

    CERN Document Server

    Wanhill, R

    2017-01-01

    This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. A considerable amount of materials data is compiled and presented in appendices at the end of the book. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

  12. Strategies for expanding health insurance coverage in vulnerable populations

    Science.gov (United States)

    Jia, Liying; Yuan, Beibei; Huang, Fei; Lu, Ying; Garner, Paul; Meng, Qingyue

    2014-01-01

    Background Health insurance has the potential to improve access to health care and protect people from the financial risks of diseases. However, health insurance coverage is often low, particularly for people most in need of protection, including children and other vulnerable populations. Objectives To assess the effectiveness of strategies for expanding health insurance coverage in vulnerable populations. Search methods We searched Cochrane Central Register of Controlled Trials (CENTRAL), part of The Cochrane Library. www.thecochranelibrary.com (searched 2 November 2012), PubMed (searched 1 November 2012), EMBASE (searched 6 July 2012), Global Health (searched 6 July 2012), IBSS (searched 6 July 2012), WHO Library Database (WHOLIS) (searched 1 November 2012), IDEAS (searched 1 November 2012), ISI-Proceedings (searched 1 November 2012),OpenGrey (changed from OpenSIGLE) (searched 1 November 2012), African Index Medicus (searched 1 November 2012), BLDS (searched 1 November 2012), Econlit (searched 1 November 2012), ELDIS (searched 1 November 2012), ERIC (searched 1 November 2012), HERDIN NeON Database (searched 1 November 2012), IndMED (searched 1 November 2012), JSTOR (searched 1 November 2012), LILACS(searched 1 November 2012), NTIS (searched 1 November 2012), PAIS (searched 6 July 2012), Popline (searched 1 November 2012), ProQuest Dissertation &Theses Database (searched 1 November 2012), PsycINFO (searched 6 July 2012), SSRN (searched 1 November 2012), Thai Index Medicus (searched 1 November 2012), World Bank (searched 2 November 2012), WanFang (searched 3 November 2012), China National Knowledge Infrastructure (CHKD-CNKI) (searched 2 November 2012). In addition, we searched the reference lists of included studies and carried out a citation search for the included studies via Web of Science to find other potentially relevant studies. Selection criteria Randomised controlled trials (RCTs), non-randomised controlled trials (NRCTs), controlled before-after (CBA

  13. Materials at LANL

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Antoinette J [Los Alamos National Laboratory

    2010-01-01

    Exploring the physics, chemistry, and metallurgy of materials has been a primary focus of Los Alamos National Laboratory since its inception. In the early 1940s, very little was known or understood about plutonium, uranium, or their alloys. In addition, several new ionic, polymeric, and energetic materials with unique properties were needed in the development of nuclear weapons. As the Laboratory has evolved, and as missions in threat reduction, defense, energy, and meeting other emerging national challenges have been added, the role of materials science has expanded with the need for continued improvement in our understanding of the structure and properties of materials and in our ability to synthesize and process materials with unique characteristics. Materials science and engineering continues to be central to this Laboratory's success, and the materials capability truly spans the entire laboratory - touching upon numerous divisions and directorates and estimated to include >1/3 of the lab's technical staff. In 2006, Los Alamos and LANS LLC began to redefine our future, building upon the laboratory's established strengths and promoted by strongly interdependent science, technology and engineering capabilities. Eight Grand Challenges for Science were set forth as a technical framework for bridging across capabilities. Two of these grand challenges, Fundamental Understanding of Materials and Superconductivity and Actinide Science. were clearly materials-centric and were led out of our organizations. The complexity of these scientific thrusts was fleshed out through workshops involving cross-disciplinary teams. These teams refined the grand challenge concepts into actionable descriptions to be used as guidance for decisions like our LDRD strategic investment strategies and as the organizing basis for our external review process. In 2008, the Laboratory published 'Building the Future of Los Alamos. The Premier National Security Science Laboratory

  14. Optical Spectroscopy of New Materials

    Science.gov (United States)

    White, Susan M.; Arnold, James O. (Technical Monitor)

    1993-01-01

    Composites are currently used for a rapidly expanding number of applications including aircraft structures, rocket nozzles, thermal protection of spacecraft, high performance ablative surfaces, sports equipment including skis, tennis rackets and bicycles, lightweight automobile components, cutting tools, and optical-grade mirrors. Composites are formed from two or more insoluble materials to produce a material with superior properties to either component. Composites range from dispersion-hardened alloys to advanced fiber-reinforced composites. UV/VIS and FTIR spectroscopy currently is used to evaluate the bonding between the matrix and the fibers, monitor the curing process of a polymer, measure surface contamination, characterize the interphase material, monitor anion transport in polymer phases, characterize the void formation (voids must be minimized because, like cracks in a bulk material, they lead to failure), characterize the surface of the fiber component, and measure the overall optical properties for energy balances.

  15. The Potential for Health Monitoring in Expandable Space Modules: The Bigelow Expandable Activity Module on the ISS

    Science.gov (United States)

    Wells, Nathan D.; Madaras, Eric I.

    2017-01-01

    Expandable modules for use in space and on the Moon or Mars offer a great opportunity for volume and mass savings in future space exploration missions. This type of module can be compressed into a relatively small shape on the ground, allowing them to fit into space vehicles with a smaller cargo/fairing size than a traditional solid, metallic structure based module would allow. In April 2016, the Bigelow Expandable Activity Module (BEAM) was berthed to the International Space Station (ISS). BEAM is the first human-rated expandable habitat/module to be deployed and crewed in space. BEAM is a NASA managed ISS payload project in partnership with Bigelow Aerospace. BEAM is intended to stay attached to ISS for an operational period of 2 years to help advance the technology readiness for future expandable modules. BEAM has been instrumented with a suite of space flight certified sensors systems which will help characterize the module's performance for thermal, radiation shielding and impact monitoring against potential Micro Meteoroid/Orbital Debris (MM/OD) providing fundamental information on the BEAM environment for potential health monitoring requirements and capabilities. This paper will provide an overview of how the sensors/instrumentation systems were developed, tested, installed and an overview of the current sensor system operations. It will also discuss how the MM/OD impact detection system referred to as the Distributed Impact Detection System (DIDS) data is being processed and reviewed on the ground by the principle investigators.

  16. The NEON Aquatic Network: Expanding the Availability of Biogeochemical Data

    Science.gov (United States)

    Vance, J. M.; Bohall, C.; Fitzgerald, M.; Utz, R.; Parker, S. M.; Roehm, C. L.; Goodman, K. J.; McLaughlin, B.

    2013-12-01

    Aquatic ecosystems are facing unprecedented pressure from climate change and land-use practices. Invasive species, whether plant, animal, insect or microbe present additional threat to aquatic ecosystem services. There are significant scientific challenges to understanding how these forces will interact to affect aquatic ecosystems, as the flow of energy and materials in the environment is driven by multivariate and non-linear biogeochemical cycles. The National Ecological Observatory Network (NEON) will collect and provide observational data across multiple scales. Sites were selected to maximize representation of major North American ecosystems using a multivariate geographic clustering method that partitioned the continental US, AK, HI, and Puerto Rico into 20 eco-climatic domains. The NEON data collection systems and methods are designed to yield standardized, near real-time data subjected to rigorous quality controls prior to public dissemination through an online data portal. NEON will collect data for 30 years to facilitate spatial-temporal analysis of environmental responses and drivers of ecosystem change, ranging from local through continental scales. Here we present the NEON Aquatic Network, a multi-parameter network consisting of a combination of in situ sensor and observational data. This network will provide data to examine biogeochemical, biological, hydrologic and geomorphic metrics at 36 sites, which are a combination of small 1st/2nd order wadeable streams, large rivers and lakes. A typical NEON Aquatic site will host up to two in-stream sensor sets designed to collect near-continuous water quality data (e.g. pH/ORP, temperature, conductivity, dissolved oxygen, CDOM) along with up to 8 shallow groundwater monitoring wells (level, temp., cond.), and a local meteorological station (e.g. 2D wind speed, PAR, barometric pressure, temperature, net radiation). These coupled sensor suites will be complemented by observational data (e.g. water

  17. Space Materials Handbook. 3rd; ed.

    Science.gov (United States)

    Rittenhouse, John B.; Singletary, John B.

    1969-01-01

    This edition is the result of an extensive revision and reworking of the second edition of the Space Materials Handbook along with the incorporation of entirely new subject matter coverage and new materials data. All of the most significant material, phenomena, properties, and principles covered in the original Handbook are presented and expanded in this revised and updated version. However, treatment of theoretical aspects has been condensed in order that more emphasis could be placed on the extensive new materials knowledge and data obtained from the design and successful launching of a wide variety of space systems. The handbook is organized into four parts, namely: space environment, effect of space environment on materials, materials in space, and biological interaction with spacecraft materials. Information on mechanical, physical, and chemical properties and characteristics is given for a wide variety of metallic and nonmetallic materials. The effects of natural and induced environments on materials are appraised. Materials categories include coverage of thermal control materials, optical materials, adhesives, organic structural materials, inorganic structural materials, electronic components and materials, materials for sealing applications, and lubrication materials. In addition, a comprehensive multiple citation index is incorporated which gives ready access to information on specific subject areas with regard to their locations within the Handbook.

  18. Nano Materials

    Energy Technology Data Exchange (ETDEWEB)

    Jin, In Ju; Lee, Ik Mo; Kwon, Yeung Gu; and others

    2006-02-15

    This book introduces background of nano science such as summary, plenty room at the bottom, access way to nano technique, nanoparticles using bottom-up method which are a marvel of nature, and modern alchemy : chemical synthesis of artificial nano structure, understanding of quantum mechanics, STM/AFM, nano metal powder, ceramic nanoparticles, nano structure film, manufacture of nanoparticles using reverse micelle method, carbon nano tube, sol-gel material, nano energy material, nano catalyst nano bio material technology and spintronics.

  19. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    This book deals with the mechanical and physical behavior of composites as influenced by composite geometry. "Composite Materials" provides a comprehensive introduction for researchers and students to modern composite materials research with a special emphasis on the significance of phase geometry....... The book enables the reader to a better understanding of the behavior of natural composites, improvement of such materials, and design of new materials with prescribed properties. A number of examples are presented: Special composite properties considered are stiffness, shrinkage, hygro-thermal behavior...

  20. Energy Education Materials Inventory

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-01

    The two volumes of the Energy Education Materials Inventory (EEMI) comprise an annotated bibliography of widely available energy education materials and reference sources. This systematic listing is designed to provide a source book which will facilitate access to these educational resources and hasten the inclusion of energy-focused learning experiences in kindergarten through grade twelve. EEMI Volume II expands Volume I and contains items that have become available since its completion in May, 1976. The inventory consists of three major parts. A core section entitled Media contains titles and descriptive information on educational materials, categorized according to medium. The other two major sections - Grade Level and Subject - are cross indexes of the items for which citations appear in the Media Section. These contain titles categorized according to grade level and subject and show the page numbers of the full citations. The general subject area covered includes the following: alternative energy sources (wood, fuel from organic wastes, geothermal energy, nuclear power, solar energy, tidal power, wind energy); energy conservation, consumption, and utilization; energy policy and legislation, environmental/social aspects of energy technology; and fossil fuels (coal, natural gas, petroleum). (RWR)

  1. Expanding beyond individualism: Engaging critical perspectives on occupation.

    Science.gov (United States)

    Gerlach, Alison J; Teachman, Gail; Laliberte-Rudman, Debbie; Aldrich, Rebecca M; Huot, Suzanne

    2018-01-01

    Perspectives that individualize occupation are poorly aligned with socially responsive and transformative occupation-focused research, education, and practice. Their predominant use in occupational therapy risks the perpetuation, rather than resolution, of occupational inequities. In this paper, we problematize taken-for-granted individualistic analyses of occupation and illustrate how critical theoretical perspectives can reveal the ways in which structural factors beyond an individual's immediate control and environment shape occupational possibilities and occupational engagement. Using a critically reflexive approach, we draw on three distinct qualitative research studies to examine the potential of critical theorizing for expanding beyond a reliance on individualistic analyses and practices. Our studies highlight the importance of addressing the socio-historical and political contexts of occupation and demonstrate the contribution of critical perspectives to socially responsive occupational therapy. In expanding beyond individualistic analyses of occupation, critical perspectives advance research and practices towards addressing socio-political mediators of occupational engagement and equity.

  2. Expanding Medicaid managed care: the right choice for Texas?

    Science.gov (United States)

    Reddy, Swapna; Finley, Marisa; Posey, Dan; Rohack, James J

    2012-10-01

    We set out to determine whether expanding Medicaid managed care in Texas is the solution to the challenges faced by the state of meeting the healthcare needs of a rapidly growing Medicaid population while addressing its own fiscal limitations. We reviewed the Texas Medicaid program, the potential effects of federal healthcare reform, and the state political climate through the perspectives (advantages and disadvantages) of the primary stakeholders: patients, practitioners, hospitals, and insurers. Research was performed through online, federal and state regulatory, and legislative review. In addition, we reviewed government and peer-reviewed reports and articles pertaining to issues related to Medicaid populations, healthcare practitioners, and hospitals that serve them. Each primary stakeholder had potential advantages and disadvantages associated with the expansion of Medicaid managed care. We conclude that expanding Medicaid managed care, if done in a manner responsive to the needs of recipients, can meet enrollees' healthcare needs while controlling the state's costs.

  3. Einstein's conversion from his static to an expanding universe

    Science.gov (United States)

    Nussbaumer, Harry

    2014-02-01

    In 1917 Einstein initiated modern cosmology by postulating, based on general relativity, a homogenous, static, spatially curved universe. To counteract gravitational contraction he introduced the cosmological constant. In 1922 Alexander Friedman showed that Albert Einstein's fundamental equations also allow dynamical worlds, and in 1927 Georges Lemaître, backed by observational evidence, concluded that our universe was expanding. Einstein impetuously rejected Friedman's as well as Lemaître's findings. However, in 1931 he retracted his former static model in favour of a dynamic solution. This investigation follows Einstein on his hesitating path from a static to the expanding universe. Contrary to an often advocated belief the primary motive for his switch was not observational evidence, but the realisation that his static model was unstable.

  4. Analysis of a Low-Angle Annular Expander Nozzle

    Directory of Open Access Journals (Sweden)

    Kyll Schomberg

    2015-01-01

    Full Text Available An experimental and numerical analysis of a low-angle annular expander nozzle is presented to observe the variance in shock structure within the flow field. A RANS-based axisymmetric numerical model was used to evaluate flow characteristics and the model validated using experimental pressure readings and schlieren images. Results were compared with an equivalent converging-diverging nozzle to determine the capability of the wake region in varying the effective area of a low-angle design. Comparison of schlieren images confirmed that shock closure occurred in the expander nozzle, prohibiting the wake region from affecting the area ratio. The findings show that a low angle of deflection is inherently unable to influence the effective area of an annular supersonic nozzle design.

  5. Einstein's conversion from his static to an expanding universe

    CERN Document Server

    Nussbaumer, Harry

    2013-01-01

    In 1917 Einstein initiated modern cosmology by postulating, based on general relativity, a homogeneous, static, spatially curved universe. To counteract gravitational contraction he introduced the cosmological constant. In 1922 Alexander Friedman showed that Einstein's fundamental equation also allowed dynamical worlds, and in 1927 Geroges Lemaitre, backed by observational evidence, concluded that our universe was expanding. Einstein impetuously rejected Friedman's as well as Lemaitre's findings. However, in 1931 he retracted his former static model in favour of a dynamic solution. This investigation follows Einstein on his hesitating path from a static to the expanding universe. Contrary to an often repeated belief the primary motive for his switch was not observational evidence, but the realisation that his static model was unstable.

  6. Opportunities for synthetic biology in antibiotics: expanding glycopeptide chemical diversity.

    Science.gov (United States)

    Thaker, Maulik N; Wright, Gerard D

    2015-03-20

    Synthetic biology offers a new path for the exploitation and improvement of natural products to address the growing crisis in antibiotic resistance. All antibiotics in clinical use are facing eventual obsolesce as a result of the evolution and dissemination of resistance mechanisms, yet there are few new drug leads forthcoming from the pharmaceutical sector. Natural products of microbial origin have proven over the past 70 years to be the wellspring of antimicrobial drugs. Harnessing synthetic biology thinking and strategies can provide new molecules and expand chemical diversity of known antibiotic scaffolds to provide much needed new drug leads. The glycopeptide antibiotics offer paradigmatic scaffolds suitable for such an approach. We review these strategies here using the glycopeptides as an example and demonstrate how synthetic biology can expand antibiotic chemical diversity to help address the growing resistance crisis.

  7. A beam expander facility for studying x-ray optics

    DEFF Research Database (Denmark)

    Christensen, Finn Erland; Hornstrup, Allan; Frederiksen, P.

    1992-01-01

    The detailed study of the performance of full scale x-ray optics often requires the illumination of large areas. This paper describes a beam expander facility at the Daresbury Synchrotron Radiation Facility. It combines monochromatization and beam expansion in one dimension. The beam expansion...... x-ray telescope will be studied, is described in detail. Review of Scientific Instruments is copyrighted by The American Institute of Physics....... is obtained from an extremely asymmetric reflection in a large single crystal of Si. An expansion of a factor of 50 was obtained in one dimension. The expanded beam of ~85 mm is limited only by the crystal size. The facility is installed in a 12-m-long hutch. A specific application, in which a high throughput...

  8. Caudal Regression and Encephalocele: Rare Manifestations of Expanded Goldenhar Complex

    Directory of Open Access Journals (Sweden)

    Gabriella D’Angelo

    2017-01-01

    Full Text Available Oculoauriculovertebral spectrum, or Goldenhar Syndrome, is a condition characterized by variable degrees of uni- or bilateral involvement of craniofacial structures, ocular anomalies, and vertebral defects. Its expressivity is variable; therefore, the term “expanded Goldenhar complex” has been coined. The Goldenhar Syndrome usually involves anomalies in craniofacial structures, but it is known that nervous system anomalies, including encephalocele or caudal regression, may, rarely, occur in this condition. We report two rare cases of infants affected by Goldenhar Syndrome, associated with neural tube defects, specifically caudal regression syndrome and nasal encephaloceles, to underline the extremely complex and heterogeneous clinical features of this oculoauriculovertebral spectrum. These additional particular cases could increase the number of new variable spectrums to be included in the “expanded Goldenhar complex.”

  9. Caudal Regression and Encephalocele: Rare Manifestations of Expanded Goldenhar Complex.

    Science.gov (United States)

    D'Angelo, Gabriella; Marseglia, Lucia; Aversa, Salvatore; Manti, Sara; Cuppari, Caterina; Cutrupi, Mariaconcetta; Salpietro, Carmelo; Gitto, Eloisa

    2017-01-01

    Oculoauriculovertebral spectrum, or Goldenhar Syndrome, is a condition characterized by variable degrees of uni- or bilateral involvement of craniofacial structures, ocular anomalies, and vertebral defects. Its expressivity is variable; therefore, the term "expanded Goldenhar complex" has been coined. The Goldenhar Syndrome usually involves anomalies in craniofacial structures, but it is known that nervous system anomalies, including encephalocele or caudal regression, may, rarely, occur in this condition. We report two rare cases of infants affected by Goldenhar Syndrome, associated with neural tube defects, specifically caudal regression syndrome and nasal encephaloceles, to underline the extremely complex and heterogeneous clinical features of this oculoauriculovertebral spectrum. These additional particular cases could increase the number of new variable spectrums to be included in the "expanded Goldenhar complex."

  10. Culture and meaning: expanding the metaphorical repertoire of family therapy.

    Science.gov (United States)

    Paré, D A

    1996-03-01

    This essay proposes that a family therapy founded on a contemporary, postmodern perspective demands an expanded range of metaphors for the family and the work of therapy. It describes a perspective that emphasizes a view of the family as a culture, as opposed to a system. A cultural perspective naturally addresses issues of meaning and language, narrative, politics, and practices of power-critical contemporary concerns not adequately encompassed by traditional systemic formulations. The essay explores the relationship between theory and metaphor, and contrasts the views of persons and of the family offered by the metaphors of culture and system. Case illustrations demonstrate how a cultural view effectively fashions an expanded therapeutic discourse, shifting the focus of family therapy from normative prescriptions for family "functionality" to issues of intercultural harmony. This shift in emphasis also extends to individual work, where the therapeutic task is construed as a peace-making between conflicting stories that intersect in the client's life.

  11. Environmental CPT Violation in an Expanding Universe in String Theory

    CERN Document Server

    Ellis, John; Sarkar, Sarben

    2013-01-01

    We consider a model of an expanding Universe in string theory that yields `environmental' CPT violation for fermions, in the sense of different dispersion relations for fermions and antifermions. These are induced by a cosmological background with constant torsion provided by the Kalb-Ramond antisymmetric tensor field (axion) of the string gravitational multiplet. This effect induces different densities of neutrinos and antineutrinos while in chemical equilibrium, offering new scenarios for leptogenesis and baryogenesis even in the absence of CP violation.

  12. Expanding the taxonomy of the diagnostic criteria for temporomandibular disorders.

    Science.gov (United States)

    Peck, C C; Goulet, J-P; Lobbezoo, F; Schiffman, E L; Alstergren, P; Anderson, G C; de Leeuw, R; Jensen, R; Michelotti, A; Ohrbach, R; Petersson, A; List, T

    2014-01-01

    There is a need to expand the current temporomandibular disorders' (TMDs) classification to include less common but clinically important disorders. The immediate aim was to develop a consensus-based classification system and associated diagnostic criteria that have clinical and research utility for less common TMDs. The long-term aim was to establish a foundation, vis-à-vis this classification system, that will stimulate data collection, validity testing and further criteria refinement. A working group [members of the International RDC/TMD Consortium Network of the International Association for Dental Research (IADR), members of the Orofacial Pain Special Interest Group (SIG) of the International Association for the Study of Pain (IASP), and members from other professional societies] reviewed disorders for inclusion based on clinical significance, the availability of plausible diagnostic criteria and the ability to operationalise and study the criteria. The disorders were derived from the literature when possible and based on expert opinion as necessary. The expanded TMDs taxonomy was presented for feedback at international meetings. Of 56 disorders considered, 37 were included in the expanded taxonomy and were placed into the following four categories: temporomandibular joint disorders, masticatory muscle disorders, headache disorders and disorders affecting associated structures. Those excluded were extremely uncommon, lacking operationalised diagnostic criteria, not clearly related to TMDs, or not sufficiently distinct from disorders already included within the taxonomy. The expanded TMDs taxonomy offers an integrated approach to clinical diagnosis and provides a framework for further research to operationalise and test the proposed taxonomy and diagnostic criteria. © 2014 John Wiley & Sons Ltd.

  13. Long-term implications of observing an expanding cosmological civilization

    Science.gov (United States)

    Olson, S. Jay

    2018-01-01

    Suppose that advanced civilizations, separated by a cosmological distance and time, wish to maximize their access to cosmic resources by rapidly expanding into the universe. How does the presence of one limit the expansionistic ambitions of another, and what sort of boundary forms between their expanding domains? We describe a general scenario for any expansion speed, separation distance and time. We then specialize to a question of particular interest: What are the future prospects for a young and ambitious civilization if they can observe the presence of another at a cosmological distance? We treat cases involving the observation of one or two expanding domains. In the single-observation case, we find that almost any plausible detection will limit one's future cosmic expansion to some extent. Also, practical technological limits to expansion speed (well below the speed of light) play an interesting role. If a domain is visible at the time one embarks on cosmic expansion, higher practical limits to expansion speed are beneficial only up to a certain point. Beyond this point, a higher speed limit means that gains in the ability to expand are more than offset by the first-mover advantage of the observed domain. In the case of two visible domains, it is possible to be `trapped' by them if the practical speed limit is high enough and their angular separation in the sky is large enough, i.e. one's expansion in any direction will terminate at a boundary with the two visible civilizations. Detection at an extreme cosmological distance has surprisingly little mitigating effect on our conclusions.

  14. A Model of Foam Density Prediction for Expanded Perlite Composites

    OpenAIRE

    Arifuzzaman Md; Kim Ho Sung

    2015-01-01

    Multiple sets of variables associated with expanded perlite particle consolidation in foam manufacturing were analyzed to develop a model for predicting perlite foam density. The consolidation of perlite particles based on the flotation method and compaction involves numerous variables leading to the final perlite foam density. The variables include binder content, compaction ratio, perlite particle size, various perlite particle densities and porosities, and various volumes of perlite at dif...

  15. Expandable gastric port for natural orifice translumenal endoscopic surgery.

    Science.gov (United States)

    Hashiba, Kiyoshi; Siqueira, Pablo R; Brasil, Horus A; Moribe, Daniel; D'Assunção, Marco Aurélio

    2010-09-01

    The risk of intraabdominal contamination is a critical consideration during most natural orifice translumenal endoscopic surgery (NOTES) procedures. The objective of this study was to determine a safe and efficient pathway for the endoscope in a transgastric NOTES procedure. A pilot experimental study in live pigs was performed. Five White Landrace pigs, weighing approximately 30-35 kg, underwent the placement of a device consisting of an expandable sheath, the distal portion of which was composed of a fully covered self-expanding metal stent, and an introducer made with an outer catheter, a pushing catheter, and an inner, guiding catheter. The sheath was attached to the stent by suturing it in place. The initial gastric opening was made by means of a needle knife papilotome with electrocoagulation, aimed to the anterior gastric wall. Then, it was dilated with an endoscopic 1.8-cm balloon. The set was introduced over a Savary guidewire. After the set placement, the outer tube was slowly retrieved. Finally, the delivery system was removed from the pig, leaving the entire endoscopic port in place. The expandable gastric port was placed without difficulty in all animals. Endoscope insertion into the expandable gastric port was very easily performed. The endoscope had a wide range of movement inside the peritoneal cavity. The gastric port sealed the gastric wall, avoiding gross contamination of the peritoneal cavity and maintaining the pneumoperitoneum without excessive inflation of the intestine. Use of a gastric port can minimize contamination of the peritoneal cavity due to the spillage of gastric contents during a transgastric NOTES procedure and can also facilitate performance of the procedure.

  16. India: When cities expand too rapidly | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-05-13

    May 13, 2016 ... “If you walk around Bangalore,” she continues, “the first thing you notice is how much everything is expanding – roads, buildings, everything.” As a result, the inhabitants must gradually change their way of life. “No one wants to stay in agriculture because it's easier to find work in the city,” explains Srinivasan ...

  17. Ceftibuten: a new expanded-spectrum oral cephalosporin.

    Science.gov (United States)

    Guay, D R

    1997-09-01

    To review the antimicrobial activity, pharmacokinetics, clinical efficacy, and tolerability of ceftibuten, a new expanded-spectrum oral cephalosporin. Literature was identified by a MEDLINE search (January 1983-June 1996) of the medical literature, review of English-language literature and bibliographies of these articles, and data on file. Clinical efficacy data were selected from all published and unpublished trials and abstracts that mentioned ceftibuten. Additional information concerning in vitro susceptibility, safety, chemistry, and pharmacokinetic profile of ceftibuten also was reviewed. Ceftibuten, an oral expanded-spectrum cephalosporin, has a broad spectrum of activity against many gram-negative and selected gram-positive organisms, including Streptococcus pneumoniae, Streptococcus pyogenes, Moraxella catarrhalis, and Haemophilus influenzae. Ceftibuten is stable to hydrolysis by many common beta-lactamases. Ceftibuten is rapidly and almost completely absorbed from the gastrointestinal tract and is primarily eliminated renally as unchanged drug. The elimination half-life of ceftibuten is slightly longer than 2 hours. Efficacy has been demonstrated in a number of clinical trials in adults and children with upper and lower respiratory tract infections (e.g., acute otitis media, pharyngitis, sinusitis, bronchitis) and urinary tract infections. The adverse effect profile is equal to that of comparator agents. Ceftibuten is an alternative to other antimicrobial agents with convenient once-daily dosing in the treatment of upper and lower respiratory tract infections. Similar to other oral expanded-spectrum cephalosporins, ceftibuten has antimicrobial activity against common pathogens of the respiratory tract and is stable in the presence of many beta-lactamases. The clinical choice of an oral expanded-spectrum cephalosporin will be based on patient acceptance, frequency of administration, and cost.

  18. Introduction: Expanding the boundaries of psychological resource theories

    OpenAIRE

    Gorgievski-Duijvesteijn, Marjan; Halbesleben, Jonathon; Bakker, Arnold

    2011-01-01

    textabstractAbstract This article introduces JOOP’s special section on expanding the boundaries of resource theories in Occupational and Organizational Psychology. After an introduction of the most relevant resource theories and their current application in Occupational and Organizational Psychology – Key resource theories, Conservation of Resources Theory, Resource Theory of Social exchange, and Selective Optimization with Compensation Theory – the opportunities and challenges for future res...

  19. Strategies for expanding health insurance coverage in vulnerable populations

    OpenAIRE

    Jia, Liying; Yuan, Beibei; Huang, Fei; Lu, Ying; Garner, Paul; Meng, Qingyue

    2014-01-01

    Background Health insurance has the potential to improve access to health care and protect people from the financial risks of diseases. However, health insurance coverage is often low, particularly for people most in need of protection, including children and other vulnerable populations. Objectives To assess the effectiveness of strategies for expanding health insurance coverage in vulnerable populations. Search methods We searched Cochrane Central Register of Controlled Trials (CENTRAL), pa...

  20. Development of Self-Expanding Idealflo (tm) Sandcontrol Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jeff A. Spray

    2007-09-30

    Development of Self-Expanding Idealflo{trademark} Sandscreen Technology was a successfully executed design-by-analysis through field demonstration project. This final report is presented as a two-part progression of concept development and manufacturing activities. The first part, conceptual development activities, discusses novel specifications creation and non-linear analytical design generation. The second part, manufacturing, contains achievement related information for detailed-design, fabrication, mechanical testing, and field demonstration activities.

  1. The 3 S's of the Sapien balloon expandable valve.

    Science.gov (United States)

    Kornowski, Ran

    2016-09-01

    The Sapien 3 (S3) balloon expandable aortic valve equipped with an outer skirt to minimize paravalvular leakage (PVL) was built upon the predecessor Sapien XT (SXT) valve. There is scant comparative data of transcatheter aortic valve replacement using S3 versus SXT valve. The study shows that S3 valve is associated with reduced PVL rate compared with SXT, which is an important clinical advantage. © 2016 Wiley Periodicals, Inc.

  2. Shower Water Reuse System-Expanded Operations to Laundry Water

    Science.gov (United States)

    2014-09-01

    Laundry rinse water carries dilute soaps and dirt. Detergents, bleaches, and disinfectants are a significant risk to plants and soils, while some...sulfate is designated as a hazardous substance 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act...Footprint Camp Program September 2014 Shower Water Reuse System- Expanded Operations to Laundry Water Work Unit WW13-01 Prepared by Valerie H. Adams, Ph.D

  3. Expanding the Lexicon: The Case of Jordanian Arabic

    OpenAIRE

    Zainab Sa'aida

    2016-01-01

    The aim of this study is to explore (non)morphological processes that native speakers of Jordanian Urban Arabic and Jordanian Rural Arabic use to expand their own lexicon. Three Jordanian female respondents were interviewed to collect data. The data consist of transcriptions of recorded tokens, which were categorised into groups according to the (non)morphological processes that they undergo. Findings of the study show that there is a number of (non)morphological processes that native speaker...

  4. The bibliometric behaviour of an expanding specialisation of medical research

    Energy Technology Data Exchange (ETDEWEB)

    Thelwall, M.; Levitt, J.

    2016-07-01

    This study investigates macular disease research and cataract research, which are both specialisations of Ophthalmology. Macular disease and cataracts are amongst the three leading causes of blindness in the world. Macular research expanded between 1992 and 2006 in that the proportion of Ophthalmology articles classified as macular increased by over 300% in that period. By contrast, during that same period the proportion of Ophthalmology articles classified as ‘cataract’ decreased by over 20%. This study investigates the bibliometric differences between the rapidly expanding specialisation of ‘macular’ and the slightly contracting specialisation of ‘cataract’. Our rationale for investigating these bibliometric differences is that previous researchers have suggested that articles in expanding specialisations are likely to be more highly cited than articles in relatively static specialisations, and it seems important, when comparing specialisations, to try to ensure that articles in a relatively static specialisation are not penalised. This study first identifies substantial macro-level bibliometric differences between the two specialisations and then gauges the extent to which these differences were associated with the expansion of Macular compared with Cataract. The initial investigation uses coarse-grained delineations of the specialisation, formed from search terms frequently associated with macular (and cataract). It finds that articles in the relatively expanding specialisation were substantially more highly cited and that these differences were associated with the expansion of the specialisation rather than the size of the specialisation (the Matthew effect). A major limitation of this study is that its coarse-grained delineation of specialisations fails to identify substantial numbers of articles in the specialisation. A more fine-grained delineation using PubMed’s Medical Subject Headings (MESH) has been piloted and additional articles

  5. The Hubble party balloon and the expanding universe

    Science.gov (United States)

    Zendri, G.; Rosi, T.; Oss, S.

    2016-09-01

    We show that the metaphor of the inflated balloon used to describe expanding space-time according to the Hubble law can be transformed into a simple laboratory experiment. We obtain, in terms of measured recession speeds and distances of ink dots drawn on a party balloon, easy renditions of various cosmological models, such as the static one and the Einstein-De Sitter universe.

  6. Expandable Polymer Enabled Wirelessly Destructible High-Performance Solid State Electronics

    KAUST Repository

    Gumus, Abdurrahman

    2017-03-29

    In today\\'s digital age, the increasing dependence on information also makes us vulnerable to potential invasion of privacy and cyber security. Consider a scenario in which a hard drive is stolen, lost, or misplaced, which contains secured and valuable information. In such a case, it is important to have the ability to remotely destroy the sensitive part of the device (e.g., memory or processor) if it is not possible to regain it. Many emerging materials and even some traditional materials like silicon, aluminum, zinc oxide, tungsten, and magnesium, which are often used for logic processor and memory, show promise to be gradually dissolved upon exposure of various liquid medium. However, often these wet processes are too slow, fully destructive, and require assistance from the liquid materials and their suitable availability at the time of need. This study shows Joule heating effect induced thermal expansion and stress gradient between thermally expandable advanced polymeric material and flexible bulk monocrystalline silicon (100) to destroy high-performance solid state electronics as needed and under 10 s. This study also shows different stimuli-assisted smartphone-operated remote destructions of such complementary metal oxide semiconductor electronics.

  7. Enhanced radiation detectors using luminescent materials

    Energy Technology Data Exchange (ETDEWEB)

    Vardeny, Zeev V. (Holladay, UT); Jeglinski, Stefan A. (Durham, NC); Lane, Paul A. (Sheffield, GB)

    2001-01-01

    A radiation detecting device comprising a radiation sensing element, and a layer of luminescent material to expand the range of wavelengths over which the sensing element can efficiently detect radiation. The luminescent material being selected to absorb radiation at selected wavelengths, causing the luminescent material to luminesce, and the luminescent radiation being detected by the sensing element. Radiation sensing elements include photodiodes (singly and in arrays), CCD arrays, IR detectors and photomultiplier tubes. Luminescent materials include polymers, oligomers, copolymers and porphyrines, Luminescent layers include thin films, thicker layers, and liquid polymers.

  8. Quantum materials discovery from a synthesis perspective

    Science.gov (United States)

    Samarth, Nitin

    2017-11-01

    The synthesis of bulk crystals, thin films and nanostructures plays a seminal role in expanding the frontiers of quantum materials. Crystal growers accomplish this by creating materials aimed at harnessing the complex interplay between quantum wavefunctions and various factors such as dimensionality, topology, Coulomb interactions and symmetry. This Review provides a synthesis perspective on how this discovery of quantum materials takes place. After introducing the general paradigms that arise in this context, we provide a few examples to illustrate how thin-film growers in particular exploit quantum confinement, topology, disorder and interfacial heterogeneity to realize new quantum materials.

  9. Stability of solid oxide fuel cell materials

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, T.R.; Pederson, L.R.; Stevenson, J.W.; Raney, P.E. [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01

    The phase stability and sintering behavior of materials used in SOFCs has been evaluated. The sintering behavior of Ca and Sr doped lanthanum. manganite (the preferred SOFC cathode material) is highly dependent on the relative proportion of A and B site cations in the material. Ca and Sr doped lanthanum chromite (the preferred interconnect material) have been shown to rapidly expand in reducing atmospheres at temperatures as low as 700{degrees}C. This expansion is due to the reduction of Cr{sup 4+} to Cr{sup 3+} in reducing environments.

  10. Quantification Assays for Total and Polyglutamine-Expanded Huntingtin Proteins

    Science.gov (United States)

    Boogaard, Ivette; Smith, Melanie; Pulli, Kristiina; Szynol, Agnieszka; Albertus, Faywell; Lamers, Marieke B. A. C.; Dijkstra, Sipke; Kordt, Daniel; Reindl, Wolfgang; Herrmann, Frank; McAllister, George; Fischer, David F.; Munoz-Sanjuan, Ignacio

    2014-01-01

    The expansion of a CAG trinucleotide repeat in the huntingtin gene, which produces huntingtin protein with an expanded polyglutamine tract, is the cause of Huntington's disease (HD). Recent studies have reported that RNAi suppression of polyglutamine-expanded huntingtin (mutant HTT) in HD animal models can ameliorate disease phenotypes. A key requirement for such preclinical studies, as well as eventual clinical trials, aimed to reduce mutant HTT exposure is a robust method to measure HTT protein levels in select tissues. We have developed several sensitive and selective assays that measure either total human HTT or polyglutamine-expanded human HTT proteins on the electrochemiluminescence Meso Scale Discovery detection platform with an increased dynamic range over other methods. In addition, we have developed an assay to detect endogenous mouse and rat HTT proteins in pre-clinical models of HD to monitor effects on the wild type protein of both allele selective and non-selective interventions. We demonstrate the application of these assays to measure HTT protein in several HD in vitro cellular and in vivo animal model systems as well as in HD patient biosamples. Furthermore, we used purified recombinant HTT proteins as standards to quantitate the absolute amount of HTT protein in such biosamples. PMID:24816435

  11. Strategies for an Expanded Use of Kidneys From Elderly Donors.

    Science.gov (United States)

    Pérez-Sáez, María José; Montero, Núria; Redondo-Pachón, Dolores; Crespo, Marta; Pascual, Julio

    2017-04-01

    The old-for-old allocation policy used for kidney transplantation (KT) has confirmed the survival benefit compared to remaining listed on dialysis. Shortage of standard donors has stimulated the development of strategies aimed to expand acceptance criteria, particularly of kidneys from elderly donors. We have systematically reviewed the literature on those different strategies. In addition to the review of outcomes of expanded criteria donor or advanced age kidneys, we assessed the value of the Kidney Donor Profile Index policy, preimplantation biopsy, dual KT, machine perfusion and special immunosuppressive protocols. Survival and functional outcomes achieved with expanded criteria donor, high Kidney Donor Profile Index or advanced age kidneys are poorer than those with standard ones. Outcomes using advanced age brain-dead or cardiac-dead donor kidneys are similar. Preimplantation biopsies and related scores have been useful to predict function, but their applicability to transplant or refuse a kidney graft has probably been overestimated. Machine perfusion techniques have decreased delayed graft function and could improve graft survival. Investing 2 kidneys in 1 recipient does not make sense when a single KT would be enough, particularly in elderly recipients. Tailored immunosuppression when transplanting an old kidney may be useful, but no formal trials are available.Old donors constitute an enormous source of useful kidneys, but their retrieval in many countries is infrequent. The assumption of limited but precious functional expectancy for an old kidney and substantial reduction of discard rates should be generalized to mitigate these limitations.

  12. Stability of stagnation via an expanding accretion shock wave

    CERN Document Server

    Velikovich, A L; Taylor, B D; Giuliani, J L; Zalesak, S T; Iwamoto, Y

    2016-01-01

    Stagnation of a cold plasma streaming to the center or axis of symmetry via an expanding accretion shock wave is ubiquitous in inertial confinement fusion (ICF) and high-energy-density plasma physics, the examples ranging from plasma flows in x-ray-generating Z pinches [Y. Maron et al., Phys. Rev. Lett. 111, 035001 (2013)] to the experiments in support of the recently suggested concept of impact ignition in ICF [H. Azechi et al., Phys. Rev. Lett. 102, 235002 (2009); M. Murakami et al., Nucl. Fusion 54, 054007 (2014)]. Some experimental evidence indicates that stagnation via an expanding shock wave is stable, but its stability has never been studied theoretically. We present such analysis for the stagnation that does not involve a rarefaction wave behind the expanding shock front and is described by the classic ideal-gas Noh solution in spherical and cylindrical geometry. In either case the stagnated flow has been demonstrated to be stable, initial perturbations exhibiting a power-law, oscillatory or monotonic...

  13. On Dark Energy and Matter of the Expanding Universe

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2009-04-01

    Full Text Available At present the expanding universe is observed to be dominated by the not fully under- stood concepts of dark energy and matter, in a conceived almost flat Euclidian geometry. As one of the possible efforts to understand the global behaviour of the expanding uni- verse, the present paper attempts to explain these concepts in terms of the pressure force and gravity of a spherical photon gas cloud of zero point energy, in a flat geometry. A difficult point of the conventional theory concerns the frequency distribution of the zero point energy oscillations which leads to the unacceptable result of an infinite total en- ergy per unit volume. A modification of this distribution is therefore proposed which results in finite energy density. A corresponding equilibrium state is investigated, as well as small dynamic deviations from it, to form a basis for a model of the expanding universe. Provided that the crucial points of the present approach hold true, the model satisfies the requirements of cosmic linear dimensions, results in an estimated accelera- tion of the expansion being of the order of the observed one, presents a possible solution of the coincidence problem of dark energy and matter, and provides one of the possible explanations of the observed excess of high-energy electrons and positrons in recent balloon and satellite experiments.

  14. Enhancing microbial production of biofuels by expanding microbial metabolic pathways.

    Science.gov (United States)

    Yu, Ping; Chen, Xingge; Li, Peng

    2017-09-01

    Fatty acid, isoprenoid, and alcohol pathways have been successfully engineered to produce biofuels. By introducing three genes, atfA, adhE, and pdc, into Escherichia coli to expand fatty acid pathway, up to 1.28 g/L of fatty acid ethyl esters can be achieved. The isoprenoid pathway can be expanded to produce bisabolene with a high titer of 900 mg/L in Saccharomyces cerevisiae. Short- and long-chain alcohols can also be effectively biosynthesized by extending the carbon chain of ketoacids with an engineered "+1" alcohol pathway. Thus, it can be concluded that expanding microbial metabolic pathways has enormous potential for enhancing microbial production of biofuels for future industrial applications. However, some major challenges for microbial production of biofuels should be overcome to compete with traditional fossil fuels: lowering production costs, reducing the time required to construct genetic elements and to increase their predictability and reliability, and creating reusable parts with useful and predictable behavior. To address these challenges, several aspects should be further considered in future: mining and transformation of genetic elements related to metabolic pathways, assembling biofuel elements and coordinating their functions, enhancing the tolerance of host cells to biofuels, and creating modular subpathways that can be easily interconnected. © 2016 International Union of Biochemistry and Molecular Biology, Inc.

  15. Waves and Fine Structure in Expanding Laser-Produced Plasmas

    Science.gov (United States)

    Collette, Andrew; Gekelman, Walter

    2009-11-01

    The behavior of expanding dense plasmas has long been a topic of interest in space plasma research, particularly in the case of expansion within a magnetized background. Previous laser-plasma experiments at the UCLA Large Plasma Device have observed the creation of strong (δBB > 50%) diamagnetic cavities, along with large-scale wave activity and hints of fine-scale structure. A new series of experiments conducted recently at the LaPD performs direct measurement of the fields inside the expanding plasma via a novel 2D probe drive system. This system combines small-scale (0.5mm-1mm) magnetic and electric field probes with high-accuracy vacuum ceramic motors, to allow measurement of the plasma volume over a 2000-point grid at 1mm resolution. The data reveal both coherent high-amplitude waves associated with the formation of these magnetic features, and complicated small-scale structure in both the magnetic field and floating potential. In addition, we will present correlation techniques using multiple independent B and E field probes. This reveals behavior of turbulent, non-phase-locked phenomena. Both the case of a single expanding plasma and two colliding plasmas were studied.

  16. Stability of stagnation via an expanding accretion shock wave

    Energy Technology Data Exchange (ETDEWEB)

    Velikovich, A. L.; Giuliani, J. L. [Plasma Physics Division, Naval Research Laboratory, Washington, DC 20375 (United States); Murakami, M. [Institute of Laser Engineering, Osaka University, Osaka 565-0871 (Japan); Taylor, B. D. [Laboratory for Computational Physics and Fluid Dynamics, Naval Research Laboratory, Washington, DC 20375 (United States); Zalesak, S. T. [Berkeley Research Associates, Beltsville, Maryland 20705 (United States); Iwamoto, Y. [Ehime University, Matsuyama, Ehime Pref. 790-8577 (Japan)

    2016-05-15

    Stagnation of a cold plasma streaming to the center or axis of symmetry via an expanding accretion shock wave is ubiquitous in inertial confinement fusion (ICF) and high-energy-density plasma physics, the examples ranging from plasma flows in x-ray-generating Z pinches [Maron et al., Phys. Rev. Lett. 111, 035001 (2013)] to the experiments in support of the recently suggested concept of impact ignition in ICF [Azechi et al., Phys. Rev. Lett. 102, 235002 (2009); Murakami et al., Nucl. Fusion 54, 054007 (2014)]. Some experimental evidence indicates that stagnation via an expanding shock wave is stable, but its stability has never been studied theoretically. We present such analysis for the stagnation that does not involve a rarefaction wave behind the expanding shock front and is described by the classic ideal-gas Noh solution in spherical and cylindrical geometry. In either case, the stagnated flow has been demonstrated to be stable, initial perturbations exhibiting a power-law, oscillatory or monotonic, decay with time for all the eigenmodes. This conclusion has been supported by our simulations done both on a Cartesian grid and on a curvilinear grid in spherical coordinates. Dispersion equation determining the eigenvalues of the problem and explicit formulas for the eigenfunction profiles corresponding to these eigenvalues are presented, making it possible to use the theory for hydrocode verification in two and three dimensions.

  17. Expanded carrier screening in gamete donors of Venezuela.

    Science.gov (United States)

    Urbina, Maria Teresa; Benjamin, Isaac; Medina, Randolfo; Jiménez, José; Trías, Laura; Lerner, Jorge

    2017-12-01

    To discuss the implications of expanded genetic carrier screening for preconception purposes based on our practice. One hundred and forty-three potential gamete donors aged 20-32 years old (µ=24, 127 females and 16 males), signed informed consent forms and were selected according to the REDLARA guidelines. Blood or saliva samples were examined by one of these genetic carrier screening methods: Genzyme screening for Cystic Fibrosis (CF), Fragile X and Spinal Muscular Atrophy (SMA); Counsyl Universal panel or Recombine Carrier Map. Genotyping results for all donors were analyzed; 41% (58/143) of donors were identified as carriers for at least one condition. We found a carrier frequency of 1/24 for CF, 1/72 for SMA and 0/120 for Fragile X syndrome. Among the high-impact most prevalent conditions in our study (Carrier Map group) were: 21-Hydroxilase-Deficient Congenital Nonclassical Adrenal Hyperplasia (1/8), Factor V deficiency (1/12), Hemochromatosis: Type 1: HFE Related (1/12), Short Chain Acyl-CoA (1/14) and MTHFR deficiency 1/3 (39%). The rate of gamete donors identified as carriers of at least one condition was 41%, which supports the offering of expanded carrier screening to our population. Studies in Latin American populations could help customize screening panels. The ART patient population has a unique opportunity to be offered expanded carrier screening and appropriate counseling, to make its best-informed decisions.

  18. Spatial structure of ion beams in an expanding plasma

    Science.gov (United States)

    Aguirre, E. M.; Scime, E. E.; Thompson, D. S.; Good, T. N.

    2017-12-01

    We report spatially resolved perpendicular and parallel, to the magnetic field, ion velocity distribution function (IVDF) measurements in an expanding argon helicon plasma. The parallel IVDFs, obtained through laser induced fluorescence (LIF), show an ion beam with v ≈ 8000 m/s flowing downstream and confined to the center of the discharge. The ion beam is measurable for tens of centimeters along the expansion axis before the LIF signal fades, likely a result of metastable quenching of the beam ions. The parallel ion beam velocity slows in agreement with expectations for the measured parallel electric field. The perpendicular IVDFs show an ion population with a radially outward flow that increases with distance from the plasma axis. Structures aligned to the expanding magnetic field appear in the DC electric field, the electron temperature, and the plasma density in the plasma plume. These measurements demonstrate that at least two-dimensional and perhaps fully three-dimensional models are needed to accurately describe the spontaneous acceleration of ion beams in expanding plasmas.

  19. Efficacy of different bone volume expanders for augmenting lumbar fusions.

    Science.gov (United States)

    Epstein, Nancy E

    2008-01-01

    A wide variety of bone volume expanders are being used in performing posterolateral lumbar noninstrumented and instrumented lumbar fusions. This article presents a review of their efficacy based on fusion rates, complications, and outcomes. Lumbar noninstrumented and instrumented fusions frequently use laminar autografts and different bone graft expanders. This review presents the utility of multiple forms/ratios of DBMs containing allografts. It also discusses the efficacy of artificial bone graft substitutes, including HA and B-TCP. Dynamic x-ray and/or CT examinations were used to document fusion in most series. Outcomes were variously assessed using Odom's criteria or different outcome questionnaires (Oswestry Questionnaire, SF-36, Dallas Pain Questionnaire, and/or Low Back Pain Rating Scale). Performing noninstrumented and instrumented lumbar posterolateral fusions resulted in comparable fusion rates in many series. Similar outcomes were also documented based on Odom's criteria or the multiple patient-based questionnaires. However, in some studies, the addition of spinal instrumentation increased the reoperation rate, operative time, blood loss, and cost. Various forms of DBMs, applied in different ratios to autografts, effectively supplemented spinal fusions in animal models and patient series. beta-Tricalcium phosphate, which is used to augment autograft fusions addressing idiopathic scoliosis or lumbar disease, also proved to be effective. Different types of bone volume expanders, including various forms of allograft-based DBMs, and artificial bone graft substitutes (HA and B-TCP) effectively promote posterolateral lumbar noninstrumented and instrumented fusions when added to autografts.

  20. Material Systems

    DEFF Research Database (Denmark)

    Jensen, Mads Brath; Mortensen, Henrik Rubæk; Mullins, Michael

    2009-01-01

    This paper describes and reflects upon the results of an investigative project which explores the setting up of a material system - a parametric and generative assembly consisting of and taking into consideration material properties, manufacturing constraints and geometric behavior. The project...

  1. Ferroic Materials

    Indian Academy of Sciences (India)

    reasonably nontechnical language. The vast application potential of ferroic materials is highlighted. Introduction. Materials possess symmetry, and sometimes .... tive sign, and even of variable magnitude. Thus the magnetisation is no more a single-valued function of the applied field. This behaviour, brought about by the ...

  2. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    . The book enables the reader to a better understanding of the behavior of natural composites, improvement of such materials, and design of new materials with prescribed properties. A number of examples are presented: Special composite properties considered are stiffness, shrinkage, hygro-thermal behavior......, viscoelastic behavior, and internal stress states. Other physical properties considered are thermal and electrical conductivities, diffusion coefficients, dielectric constants and magnetic permeability. Special attention is given to the effect of pore shape on the mechanical and physical behavior of porous...... materials. Numerical procedures are outlined which facilitate the practical analysis of any feature considered in this book. Examples are presented which illustrate the analysis of well-known materials such as concrete, hardening cement paste, ceramics, tile, wood, impregnated and reinforced materials...

  3. Material Programming

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Boer, Laurens; Tsaknaki, Vasiliki

    2017-01-01

    , and color, but additionally being capable of sensing, actuating, and computing. Indeed, computers will not be things in and by themselves, but embedded into the materials that make up our surroundings. This also means that the way we interact with computers and the way we program them, will change....... Consequently we ask what the practice of programming and giving form to such materials would be like? How would we be able to familiarize ourselves with the dynamics of these materials and their different combinations of cause and effect? Which tools would we need and what would they look like? Will we program...... these computational composites through external computers and then transfer the code them, or will the programming happen closer to the materials? In this feature we outline a new research program that floats between imagined futures and the development of a material programming practice....

  4. Periodontal materials.

    Science.gov (United States)

    Darby, I

    2011-06-01

    Periodontics is more associated with debridement of periodontal pockets and not generally thought of as using dental materials in the treatment of patients. However, the last 30 years have seen the development of materials used in regeneration of the periodontal tissues following periodontal disease, guided tissue regeneration, and the use of these materials in bone regeneration more recently, guided bone regeneration. The materials used include bone grafts and membranes, but also growth factors and cells-based therapies. This review provides an overview of the materials currently used and looks at contemporary research with a view to what may be used in the future. It also looks at the clinical effectiveness of these regenerative therapies with an emphasis on what is available in Australia. © 2011 Australian Dental Association.

  5. Composite material

    Science.gov (United States)

    Hutchens, Stacy A [Knoxville, TN; Woodward, Jonathan [Solihull, GB; Evans, Barbara R [Oak Ridge, TN; O'Neill, Hugh M [Knoxville, TN

    2012-02-07

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  6. Bioresponsive materials

    Science.gov (United States)

    Lu, Yue; Aimetti, Alex A.; Langer, Robert; Gu, Zhen

    2017-01-01

    'Smart' bioresponsive materials that are sensitive to biological signals or to pathological abnormalities, and interact with or are actuated by them, are appealing therapeutic platforms for the development of next-generation precision medications. Armed with a better understanding of various biologically responsive mechanisms, researchers have made innovations in the areas of materials chemistry, biomolecular engineering, pharmaceutical science, and micro- and nanofabrication to develop bioresponsive materials for a range of applications, including controlled drug delivery, diagnostics, tissue engineering and biomedical devices. This Review highlights recent advances in the design of smart materials capable of responding to the physiological environment, to biomarkers and to biological particulates. Key design principles, challenges and future directions, including clinical translation, of bioresponsive materials are also discussed.

  7. Touching Materiality

    DEFF Research Database (Denmark)

    Rasmussen, Lisa Rosén

    2012-01-01

    . Drawing on anthropological writings, the article argues that the objects of materiality are part of important but non-verbalised memories of schooling. The Dutch philosopher Eelco Runia’s notions of presence and metonymy are incorporated as tools for approaching objects of materiality in memory studies.......Dripping ink pens, colourful paint on skin, vegetables pots on a school roof. In interviews with three generations of former school pupils, memories of material objects bore a relation to everyday school life in the past. Interwoven, these objects entered the memorising processes, taking...... the interviewer and interviewee beyond an exclusively linguistic understanding of memory. This article analyses how the shifting objects of materiality in personal and generational school memories connects to material as well as sensuous experiences of everyday school life and its complex processes of learning...

  8. Expanded newborn screening in the Health Services of the Mexican Navy

    Directory of Open Access Journals (Sweden)

    Max Trigo-Madrid

    2014-11-01

    Full Text Available In Mexico the birth prevalence of the metabolic diseases detected by expanded newborn screening is poorly known and there is little information about its performance indicators.Objective. Describe the birth prevalence of the metabolic defects detected by the expanded newborn screening program implemented in the Mexican Navy (Secretaría de Marina Armada de México, SEMAR, and to make known some of its performance indicators. Materials and Methods. A blood sample of 5 205 newborns from 18 Mexican states were taken. The age at blood sampling, the proportion of samples taken between the 3rd and the 5th days of life, and the time of results delivery were analyzed. The number and type of detected metabolic diseases, as well as the maternal age and body mass index, the type of birth, the gestational age and weight of the newborns were analized. Results. The age at blood sampling was 4.7 days and 81.15 percent of the samples were obtained in optimal time. Two cases of congenital hypothyroidism (3.8/10 000 newborns, one of adrenal congenital hyperplasia (1.9/10 000 newborns and five cases of deficiency of glucose- 6-phosphate dehydrogenase (9.6/10 000 newborns were detected. The 85.6% of mothers had pregnancies at an optimal reproductive age (20-35 years, but overweight and obesity occurred in 44.7% of them. Conclusions. In this analyzed population, the birth prevalence of metabolic defects was 15.37/10 000 newborns. The expanded newborn screening program allowed its identification and timely treatment, with the aim of preventing disability and death.

  9. Environmental Assessment Expanded Ponnequin Wind Energy Project Weld County, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    N/A

    1999-03-02

    The U.S.Department of Energy (DOE) has considered a proposal from the State of Colorado, Office of Energy Conservation (OEC), for funding construction of the Expanded Ponnequin Wind Project in Weld County, Colorado. OEC plans to enter into a contracting arrangement with Public Service Company of Colorado (PSCO) for the completion of these activities. PSCo, along with its subcontractors and business partners, are jointly developing the Expanded Ponnequin Wind Project. DOE completed an environmental assessment of the original proposed project in August 1997. Since then, the geographic scope and the design of the project changed, necessitating additional review of the project under the National Environmental Policy Act. The project now calls for the possible construction of up to 48 wind turbines on State and private lands. PSCo and its partners have initiated construction of the project on private land in Weld County, Colorado. A substation, access road and some wind turbines have been installed. However, to date, DOE has not provided any funding for these activities. DOE, through its Commercialization Ventures Program, has solicited applications for financial assistance from state energy offices, in a teaming arrangement with private-sector organizations, for projects that will accelerate the commercialization of emerging renewable energy technologies. The Commercialization Ventures Program was established by the Renewable Energy and Energy Efficiency Technology Competitiveness Act of 1989 (P.L. 101-218) as amended by the Energy Policy Act of 1992 (P.L. 102-486). The Program seeks to assist entry into the marketplace of newly emerging renewable energy technologies, or of innovative applications of existing technologies. In short, an emerging renewable energy technology is one which has already proven viable but which has had little or no operational experience. The Program is managed by the Department of Energy, Office of Energy Efficiency and Renewable Energy. The

  10. Commercial expanded graphite as a low-cost, long-cycling life anode for potassium-ion batteries with conventional carbonate electrolyte

    Science.gov (United States)

    An, Yongling; Fei, Huifang; Zeng, Guifang; Ci, Lijie; Xi, Baojuan; Xiong, Shenglin; Feng, Jinkui

    2018-02-01

    Design and synthesis of capable anode materials that can store the large size K+ is the key of development for potassium-ion batteries. The low-cost and commercial expanded graphite with large particles is a graphite-derived material with good conductivity and enlarged interlayer spaces to boost the potassium ion diffusion coefficient during charge/discharge process. Thus, we achieve excellent anode performance for potassium-ion batteries based on an expanded graphite. It can deliver a capacity of 263 mAh g-1 at the rate of 10 mA g-1 and the reversible capacity remains almost unchanged after 500 cycles at a high rate of 200 mA g-1 with a coulombic efficiency of around 100%. The potassium storage mechanism is investigated by the ex situ XRD technique. This excellent potassium storage performance will make the expanded graphite promising anode candidate for potassium ion batteries.

  11. Cryo-electron Microscopy Structures of Expanded Poliovirus with VHHs Sample the Conformational Repertoire of the Expanded State.

    Science.gov (United States)

    Strauss, Mike; Schotte, Lise; Karunatilaka, Krishanthi S; Filman, David J; Hogle, James M

    2017-02-01

    By using cryo-electron microscopy, expanded 80S-like poliovirus virions (poliovirions) were visualized in complexes with four 80S-specific camelid VHHs (Nanobodies). In all four complexes, the VHHs bind to a site on the top surface of the capsid protein VP3, which is hidden in the native virus. Interestingly, although the four VHHs bind to the same site, the structures of the expanded virus differ in detail in each complex, suggesting that each of the Nanobodies has sampled a range of low-energy structures available to the expanded virion. By stabilizing unique structures of expanded virions, VHH binding permitted a more detailed view of the virus structure than was previously possible, leading to a better understanding of the expansion process that is a critical step in infection. It is now clear which polypeptide chains become disordered and which become rearranged. The higher resolution of these structures also revealed well-ordered conformations for the EF loop of VP2, the GH loop of VP3, and the N-terminal extensions of VP1 and VP2, which, in retrospect, were present in lower-resolution structures but not recognized. These structural observations help to explain preexisting mutational data and provide insights into several other stages of the poliovirus life cycle, including the mechanism of receptor-triggered virus expansion. When poliovirus infects a cell, it undergoes a change in its structure in order to pass RNA through its protein coat, but this altered state is short-lived and thus poorly understood. The structures of poliovirus bound to single-domain antibodies presented here capture the altered virus in what appear to be intermediate states. A careful analysis of these structures lets us better understand the molecular mechanism of infection and how these changes in the virus lead to productive-infection events. Copyright © 2017 American Society for Microbiology.

  12. Cryo-electron Microscopy Structures of Expanded Poliovirus with VHHs Sample the Conformational Repertoire of the Expanded State

    Science.gov (United States)

    Strauss, Mike; Schotte, Lise; Karunatilaka, Krishanthi S.; Filman, David J.

    2016-01-01

    ABSTRACT By using cryo-electron microscopy, expanded 80S-like poliovirus virions (poliovirions) were visualized in complexes with four 80S-specific camelid VHHs (Nanobodies). In all four complexes, the VHHs bind to a site on the top surface of the capsid protein VP3, which is hidden in the native virus. Interestingly, although the four VHHs bind to the same site, the structures of the expanded virus differ in detail in each complex, suggesting that each of the Nanobodies has sampled a range of low-energy structures available to the expanded virion. By stabilizing unique structures of expanded virions, VHH binding permitted a more detailed view of the virus structure than was previously possible, leading to a better understanding of the expansion process that is a critical step in infection. It is now clear which polypeptide chains become disordered and which become rearranged. The higher resolution of these structures also revealed well-ordered conformations for the EF loop of VP2, the GH loop of VP3, and the N-terminal extensions of VP1 and VP2, which, in retrospect, were present in lower-resolution structures but not recognized. These structural observations help to explain preexisting mutational data and provide insights into several other stages of the poliovirus life cycle, including the mechanism of receptor-triggered virus expansion. IMPORTANCE When poliovirus infects a cell, it undergoes a change in its structure in order to pass RNA through its protein coat, but this altered state is short-lived and thus poorly understood. The structures of poliovirus bound to single-domain antibodies presented here capture the altered virus in what appear to be intermediate states. A careful analysis of these structures lets us better understand the molecular mechanism of infection and how these changes in the virus lead to productive-infection events. PMID:27852863

  13. 3D printing with polymers: Challenges among expanding options and opportunities.

    Science.gov (United States)

    Stansbury, Jeffrey W; Idacavage, Mike J

    2016-01-01

    Additive manufacturing, which is more colloquially referred to as 3D printing, is quickly approaching mainstream adoption as a highly flexible processing technique that can be applied to plastic, metal, ceramic, concrete and other building materials. However, taking advantage of the tremendous versatility associated with in situ photopolymerization as well as the ability to select from a variety of preformed processible polymers, 3D printing predominantly targets the production of polymeric parts and models. The goal of this review is to connect the various additive manufacturing techniques with the monomeric and polymeric materials they use while highlighting emerging material-based developments. Modern additive manufacturing technology was introduced approximately three decades ago but this review compiles recent peer-reviewed literature reports to demonstrate the evolution underway with respect to the various building techniques that differ significantly in approach as well as the new variations in polymer-based materials being employed. Recent growth of 3D printing has been dramatic and the ability of the various platform technologies to expand from rapid production prototypic models to the greater volume of readily customizable production of working parts is critical for continued high growth rates. This transition to working part production is highly dependent on adapting materials that deliver not only the requisite design accuracy but also the physical and mechanical properties necessary for the application. With the weighty distinction of being called the next industrial revolution, 3D printing technologies is already altering many industrial and academic operations including changing models for future healthcare delivery in medicine and dentistry. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  14. Utopian Materialities

    DEFF Research Database (Denmark)

    Elgaard-Jensen, Torben

    2004-01-01

    In various ways, this paper makes the counter-intuitive claim that the utopian and the material are thoroughlyinterdependent, rather than worlds apart. First, through a reading of Thomas More's Utopia, it is argued thatUtopia is the product of particular kinds of relations, rather than merely...... to its persuasive image of being the office of the future.The notion that utopia is achieved through material arrangements is finally related to the analysis of facts andfictions in ANT. It is argued, that even though Utopias are neither fact nor fiction, they are both material andeffective...

  15. Plastic compressed collagen as a novel carrier for expanded human corneal endothelial cells for transplantation.

    Directory of Open Access Journals (Sweden)

    Hannah J Levis

    Full Text Available Current treatments for reversible blindness caused by corneal endothelial cell failure involve replacing the failed endothelium with donor tissue using a one donor-one recipient strategy. Due to the increasing pressure of a worldwide donor cornea shortage there has been considerable interest in developing alternative strategies to treat endothelial disorders using expanded cell replacement therapy. Protocols have been developed which allow successful expansion of endothelial cells in vitro but this approach requires a supporting material that would allow easy transfer of cells to the recipient. We describe the first use of plastic compressed collagen as a highly effective, novel carrier for human corneal endothelial cells. A human corneal endothelial cell line and primary human corneal endothelial cells retained their characteristic cobblestone morphology and expression of tight junction protein ZO-1 and pump protein Na+/K+ ATPase α1 after culture on collagen constructs for up to 14 days. Additionally, ultrastructural analysis suggested a well-integrated endothelial layer with tightly opposed cells and apical microvilli. Plastic compressed collagen is a superior biomaterial in terms of its speed and ease of production and its ability to be manipulated in a clinically relevant manner without breakage. This method provides expanded endothelial cells with a substrate that could be suitable for transplantation allowing one donor cornea to potentially treat multiple patients.

  16. Plastic compressed collagen as a novel carrier for expanded human corneal endothelial cells for transplantation.

    Science.gov (United States)

    Levis, Hannah J; Peh, Gary S L; Toh, Kah-Peng; Poh, Rebekah; Shortt, Alex J; Drake, Rosemary A L; Mehta, Jodhbir S; Daniels, Julie T

    2012-01-01

    Current treatments for reversible blindness caused by corneal endothelial cell failure involve replacing the failed endothelium with donor tissue using a one donor-one recipient strategy. Due to the increasing pressure of a worldwide donor cornea shortage there has been considerable interest in developing alternative strategies to treat endothelial disorders using expanded cell replacement therapy. Protocols have been developed which allow successful expansion of endothelial cells in vitro but this approach requires a supporting material that would allow easy transfer of cells to the recipient. We describe the first use of plastic compressed collagen as a highly effective, novel carrier for human corneal endothelial cells. A human corneal endothelial cell line and primary human corneal endothelial cells retained their characteristic cobblestone morphology and expression of tight junction protein ZO-1 and pump protein Na+/K+ ATPase α1 after culture on collagen constructs for up to 14 days. Additionally, ultrastructural analysis suggested a well-integrated endothelial layer with tightly opposed cells and apical microvilli. Plastic compressed collagen is a superior biomaterial in terms of its speed and ease of production and its ability to be manipulated in a clinically relevant manner without breakage. This method provides expanded endothelial cells with a substrate that could be suitable for transplantation allowing one donor cornea to potentially treat multiple patients.

  17. Reference Materials

    Science.gov (United States)

    Merkus, Henk G.

    Reference materials for measurement of particle size and porosity may be used for calibration or qualification of instruments or for validation of operating procedures or operators. They cover a broad range of materials. On the one hand there are the certified reference materials, for which governmental institutes have certified one or more typical size or porosity values. Then, there is a large group of reference materials from commercial companies. And on the other hand there are typical products in a given line of industry, where size or porosity values come from the analysis laboratory itself or from some round-robin test in a group of industrial laboratories. Their regular application is essential for adequate quality control of particle size and porosity measurement, as required in e.g., ISO 17025 on quality management. In relation to this, some quality requirements for certification are presented.

  18. MIS Expandable Interbody Spacers: A Literature Review and Biomechanical Comparison of an Expandable MIS TLIF With Conventional TLIF and ALIF.

    Science.gov (United States)

    Cannestra, Andrew F; Peterson, Mark D; Parker, Stephen R; Roush, Thomas F; Bundy, Justin V; Turner, Alexander W

    2016-04-01

    Biomechanical study and review of literature on expandable lumbar interbody fusion constructs. To evaluate the biomechanical stability of expandable interbody devices. Lumbar interbody implants placed from an anterior or lateral approach are desirable due to their large size, providing a stable fusion environment. Posterior implants are typically limited by their access corridor. Expandable footprint transforaminal lumbar interbody fusion (TLIF) interbodies may allow for a minimally invasive TLIF approach with the biomechanical benefits of an anterior lumbar interbody fusion (ALIF)-sized graft; however, this requires experimental investigation. Six cadaveric L1-sacrum segments were tested intact with pure moments of  ± 7.5  N m in flexion-extension, lateral bending, and axial rotation. Specimens received at L4-5 either a medial-lateral expandable TLIF cage (MLX-TLIF) or a conventional polyether ether ketone (PEEK) banana-shaped TLIF cage (Conv-TLIF) first. Both were tested with unilateral and bilateral pedicle screw (PS) fixation. Testing was repeated with the alternate cage and fixation. Motion marker arrays were fixed to L4 and L5 to assess range of motion. Results were compared with published data for a PEEK ALIF cage with anterior plate and a PEEK ALIF cage with bilateral PS fixation, tested under the same conditions. The most rigid construct was ALIF with bilateral PS fixation in flexion-extension and axial rotation, whereas MLX with bilateral PS was most rigid in lateral bending. Conv-TLIF with unilateral PS was the least rigid construct. MLX-TLIF with unilateral PS provided similar range of motion to Conv-TLIF with bilateral PS in flexion-extension and lateral bending, and ALIF with anterior plate in lateral bending. The MLX-TLIF cage with unilateral PS fixation provided comparable stability to conventional TLIF with bilateral PS fixation and ALIF with anterior plate treatments. The large footprint of the expandable cage may reduce the TLIF

  19. Phylogenetic lineages, clones and β-lactamases in an international collection of Klebsiella oxytoca isolates non-susceptible to expanded-spectrum cephalosporins

    NARCIS (Netherlands)

    Izdebski, R.; Fiett, J.; Urbanowicz, P.; Baraniak, A.; Derde, L. P G; Bonten, M. J M; Carmeli, Y.; Goossens, H.; Hryniewicz, W.; Brun-Buisson, C.; Brisse, S.; Gniadkowski, M.; Herda, M.; Dautzenberg, M. J.; Adler, A.; Kazma, M.; Navon-Venezia, S.; Malhotra-Kumar, S.; Lammens, C.; Legrand, P.; Chalfine, A.; Giamarellou, H.; Petrikkos, G. L.; Balode, A.; Dumpis, U.; Stammet, P.; Aragăo, I.; Esteves, F.; Torres Martí, A.; Lawrence, C.; Salomon, J.; Paul, M.; Lerman, Y.; Rossini, A.; Salvia, A.; Vidal Samso, J.; Fierro, J.

    2015-01-01

    Objectives: The objective of this study was to examine Klebsiella oxytoca clonal and phylogenetic diversity, based on an international collection of carriage isolates non-susceptible to expanded-spectrum cephalosporins (ESCs). Methods: The study material comprised 68 rectal carriage K. oxytoca

  20. Can we expand active surveillance criteria to include biopsy Gleason 3+4 prostate cancer? A multi-institutional study of 2,323 patients

    NARCIS (Netherlands)

    Ploussard, G.; Isbarn, H.; Briganti, A.; Sooriakumaran, P.; Surcel, C.I.; Salomon, L.; Freschi, M.; Mirvald, C.; Poel, H.G. van der; Jenkins, A.; Ost, P.; Oort, I.M. van; Yossepowitch, O.; Giannarini, G.; Bergh, R.C. van den

    2015-01-01

    OBJECTIVE: To test the expandability of active surveillance (AS) to Gleason score 3+4 cancers by assessing the unfavorable disease risk in a large multi-institutional cohort. MATERIALS AND METHODS: We performed a retrospective analysis including 2,323 patients with localized Gleason score 3+4

  1. Propulsion materials

    Energy Technology Data Exchange (ETDEWEB)

    Wall, Edward J. [U.S. Dept. of Energy, Washington, D.C. (United States); Sullivan, Rogelio A. [U.S. Dept. of Energy, Washington, D.C. (United States); Gibbs, Jerry L. [U.S. Dept. of Energy, Washington, D.C. (United States)

    2008-01-01

    The Department of Energy’s (DOE’s) Office of Vehicle Technologies (OVT) is pleased to introduce the FY 2007 Annual Progress Report for the Propulsion Materials Research and Development Program. Together with DOE national laboratories and in partnership with private industry and universities across the United States, the program continues to engage in research and development (R&D) that provides enabling materials technology for fuel-efficient and environmentally friendly commercial and passenger vehicles.

  2. Background Material

    DEFF Research Database (Denmark)

    Zandersen, Marianne; Hyytiäinen, Kari; Saraiva, Sofia

    This document serves as a background material to the BONUS Pilot Scenario Workshop, which aims to develop harmonised regional storylines of socio-ecological futures in the Baltic Sea region in a collaborative effort together with other BONUS projects and stakeholders.......This document serves as a background material to the BONUS Pilot Scenario Workshop, which aims to develop harmonised regional storylines of socio-ecological futures in the Baltic Sea region in a collaborative effort together with other BONUS projects and stakeholders....

  3. Encountering Materiality

    DEFF Research Database (Denmark)

    Svabo, Connie

    2016-01-01

    DHT researcher Connie Svabo and artist Charlotte Grum did a joint performance presentation titled Becoming Sheep, Becoming Animal at the international conference Encountering Materiality – Transdisciplinary Conversations, held in Geneve, Schwitzerland, June 23-25 2016.......DHT researcher Connie Svabo and artist Charlotte Grum did a joint performance presentation titled Becoming Sheep, Becoming Animal at the international conference Encountering Materiality – Transdisciplinary Conversations, held in Geneve, Schwitzerland, June 23-25 2016....

  4. Polymeric Materials

    Science.gov (United States)

    2009-06-01

    Sandia)-funded programs and two approved proposals for neutron scattering time at NIST. To enable future growth, optically adaptive materials for...Nanophase Particle ( SNAP ) Coatings.” Progress in Organic Coatings, 47(3-4), 337, 2003. Jong-Beom Baek and Loon-Seng Tan, “Linear-Hyperbranched...Silicates”, Materials Research Society Symposium Proceedings, Volume Date 2004, 840( Neutron and X-Ray Scattering as Probes of Multiscale Phenomena), 57

  5. Materials informatics

    OpenAIRE

    Krishna Rajan

    2005-01-01

    Seeking structure-property relationships is an accepted paradigm in materials science, yet these relationships are often not linear, and the challenge is to seek patterns among multiple lengthscales and timescales. There is rarely a single multiscale theory or experiment that can meaningfully and accurately capture such information. In this article, we outline a process termed ‘materials informatics’ that allows one to survey complex, multiscale information in a high-throughput, statistically...

  6. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    , viscoelastic behavior, and internal stress states. Other physical properties considered are thermal and electrical conductivities, diffusion coefficients, dielectric constants and magnetic permeability. Special attention is given to the effect of pore shape on the mechanical and physical behavior of porous......This book deals with the mechanical and physical behavior of composites as influenced by composite geometry. "Composite Materials" provides a comprehensive introduction for researchers and students to modern composite materials research with a special emphasis on the significance of phase geometry...

  7. Experimental and numerical study of the fragmentation of expanding warhead casings by using different numerical codes and solution techniques

    Directory of Open Access Journals (Sweden)

    John F. Moxnes

    2014-06-01

    Full Text Available There has been increasing interest in numerical simulations of fragmentation of expanding warheads in 3D. Accordingly there is a pressure on developers of leading commercial codes, such as LS-DYNA, AUTODYN and IMPETUS Afea, to implement the reliable fracture models and the efficient solution techniques. The applicability of the Johnson–Cook strength and fracture model is evaluated by comparing the fracture behaviour of an expanding steel casing of a warhead with experiments. The numerical codes and different numerical solution techniques, such as Eulerian, Lagrangian, Smooth particle hydrodynamics (SPH, and the corpuscular models recently implemented in IMPETUS Afea are compared. For the same solution techniques and material models we find that the codes give similar results. The SPH technique and the corpuscular technique are superior to the Eulerian technique and the Lagrangian technique (with erosion when it is applied to materials that have fluid like behaviour such as the explosive and the tracer. The Eulerian technique gives much larger calculation time and both the Lagrangian and Eulerian techniques seem to give less agreement with our measurements. To more correctly simulate the fracture behaviours of the expanding steel casing, we applied that ductility decreases with strain rate. The phenomena may be explained by the realization of adiabatic shear bands. An implemented node splitting algorithm in IMPETUS Afea seems very promising.

  8. Expanding Access to Pro-Poor Energy Services in Nigeria

    Energy Technology Data Exchange (ETDEWEB)

    Eleri, Ewah Otu; Ugwu, Okechukwu; Onuvae, Precious

    2012-10-15

    Nigeria experiences a remarkable paradox -- the abundance of energy resources and widespread energy poverty. Only about 40% of the population has access to the country’s grid electricity. About 72% of the population depends on traditional fuelwood for cooking. Despite this, government financing of energy services that benefits majority of Nigeria’s population has been grossly inadequate. Private sector investments and donor support have not fared better. This paper examines the current level of energy poverty in Nigeria. It analyses the level of government, private sector and donor funding for energy services that benefit the poor. It further reviews international best practices in expanding access for pro poor energy services. The paper finds a significant decline in political interest for expanding electricity services to rural areas. Even though ambitious policy reforms have commenced, agreed programmes are not implemented effectively. Not only are investments in rural electrification in decline, there is no history of annual budgeting for cooking energy programmes. The paper recommends a number of action points for expanding access to energy services that benefit the poor. These include the development and launching of a new national rural electrification strategy; establishment of a national cooking energy programme; and the development of clear policy incentives to support private sector investment in energy services for the poor. It calls on the Nigerian Central Bank of Nigeria to set aside 10% of the existing power intervention fund for pro poor energy financing; and the Nigerian Electricity Regulatory Commission to establish a clear framework for the utilization of the Consumer Assistance Fund. Other recommendations include the use of a proportion of the Ecological Fund to finance cooking energy; establishment of a donor’s platform on pro poor energy; and the mobilization of civil society in providing community-level energy services.

  9. Malignant duodenal obstructions: palliative treatment with covered expandable nitinol stent

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Chul; Jung, Gyoo Sik; Lee, Sang Hee; Kim, Sung Min; Oh, Kyung Seung; Huh, Jin Do; Cho, Young Duk [College of Medicine, Kosin Univ, Pusan (Korea, Republic of); Song, Ho Young [College of Medicine, Ulsan Univ., Seoul (Korea, Republic of)

    2002-04-01

    To evaluate the feasibility and clinical effectiveness of using a polyurethane-covered expandable nitinol stent in the palliative treatment of malignant duodenal obstruction. Under fluoroscopic guidance, a polyurethane-covered expandable nitinol stent was placed in 12 consecutive patients with malignant duodenal obstructions. All presented with severe nausea and recurrent vomiting. The underlying causes of obstruction were duodenal carcinoma (n=4), pancreatic carcinoma (n=4), gall bladder carcinoma (n=2), distal CBD carcinoma (n=1), and uterine cervical carcinoma (n=1). The sites of obstruction were part I (n=1), part II (n=8), and III (n=3). Due to pre-existing jaundice, eight patients with part II obstructions underwent biliary decompression prior to stent placement. An introducer sheath with a 6-mm outer diameter and stents 16 mm in diameter were employed, and to place the stent, and after-loading technique was used. Stent placement was technically successful in ten patients, and no procedural complications occuured. In one of two patients in whom there was technical failure, and in whom the obstructions were located in part III, the stent was placed transgastrically. Stent migration occurred in one patient four days after the procedure, and treatment involved the palcement of a second, uncovered, nitinol stent. After stent placement, symptoms improved in all patients. During follow-up, obstructive symptoms due to stent stenosis (n=1), colonic obstruction (n=1), and multiple small bowel obstruction (n=1) recurred in three patients. Two of these were treated by placing additional stents in the duodenum and colon, respectively. One of the eight patients in whom a stent was placed in the second portion of the duodenum developed jaundice. The patients died a mean 14 (median, 9) weeks after stent placement. The placement of a polyurethane-covered expandable nitinol stent seems to be technically feasible, safe and effective for the palliative treatment of malignant

  10. Emissions reductions from expanding state-level renewable portfolio standards.

    Science.gov (United States)

    Johnson, Jeremiah X; Novacheck, Joshua

    2015-05-05

    In the United States, state-level Renewable Portfolio Standards (RPS) have served as key drivers for the development of new renewable energy. This research presents a method to evaluate emissions reductions and costs attributable to new or expanded RPS programs by integrating a comprehensive economic dispatch model and a renewable project selection model. The latter model minimizes incremental RPS costs, accounting for renewable power purchase agreements (PPAs), displaced generation and capacity costs, and net changes to a state's imports and exports. We test this method on potential expansions to Michigan's RPS, evaluating target renewable penetrations of 10% (business as usual or BAU), 20%, 25%, and 40%, with varying times to completion. Relative to the BAU case, these expanded RPS policies reduce the CO2 intensity of generation by 13%, 18%, and 33% by 2035, respectively. SO2 emissions intensity decreased by 13%, 20%, and 34% for each of the three scenarios, while NOx reductions totaled 12%, 17%, and 31%, relative to the BAU case. For CO2 and NOx, absolute reductions in emissions intensity were not as large due to an increasing trend in emissions intensity in the BAU case driven by load growth. Over the study period (2015 to 2035), the absolute CO2 emissions intensity increased by 1% in the 20% RPS case and decreased by 6% and 22% for the 25% and 40% cases, respectively. Between 26% and 31% of the CO2, SO2, and NOx emissions reductions attributable to the expanded RPS occur in neighboring states, underscoring the challenges quantifying local emissions reductions from state-level energy policies with an interconnected grid. Without federal subsidies, the cost of CO2 mitigation using an RPS in Michigan is between $28 and $34/t CO2 when RPS targets are met. The optimal renewable build plan is sensitive to the capacity credit for solar but insensitive to the value for wind power.

  11. Decomposition kinetics of expanded austenite with high nitrogen contents

    DEFF Research Database (Denmark)

    Christiansen, Thomas; Somers, Marcel A. J.

    2006-01-01

    This paper addresses the decomposition kinetics of synthesized homogeneous expanded austenite formed by gaseous nitriding of stainless steel AISI 304L and AISI 316L with nitrogen contents up to 38 at.% nitrogen. Isochronal annealing experiments were carried out in both inert (N2) and reducing (H2......) atmospheres. Differential thermal analysis (DTA) and thermogravimetry were applied for identification of the decomposition reactions and X-ray diffraction analysis was applied for phase analysis. CrN precipitated upon annealing; the activation energies are 187 kJ/mol and 128 kJ/mol for AISI 316L and AISI 304L...

  12. Simple scheme for expanding photonic cluster states for quantum information

    Energy Technology Data Exchange (ETDEWEB)

    Kalasuwan, P.; Laing, A.; Coggins, J.; Callaway, M.; O' Brien, J. L. [Centre for Quantum Photonics, H. H. Wills Physics Laboratory and Department of Electrical and Electronic Engineering, University of Bristol, Merchant Venturers Building, Woodland Road, Bristol, BS8 1UB (United Kingdom); Mendoza, G. [Centre for Quantum Photonics, H. H. Wills Physics Laboratory and Department of Electrical and Electronic Engineering, University of Bristol, Merchant Venturers Building, Woodland Road, Bristol, BS8 1UB (United Kingdom); California Institute of Technology, Pasadena, California 91125 (United States); Nagata, T.; Takeuchi, S. [Research Institute for Electronic Science, Hokkaido University, Sapporo 060-0812 (Japan); Institute of Scientific and Industrial Research, Osaka University, Mihogaoka 8-1, Ibaraki, Osaka 567-0047 (Japan); Stefanov, A. [Federal Office of Metrology METAS, Laboratory Time and Frequency, Lindenweg 50, 3084 Wabern (Switzerland)

    2010-06-15

    We show how an entangled cluster state encoded in the polarization of single photons can be straightforwardly expanded by deterministically entangling additional qubits encoded in the path degree of freedom of the constituent photons. This can be achieved using a polarization-path controlled-phase gate. We experimentally demonstrate a practical and stable realization of this approach by using a Sagnac interferometer to entangle a path qubit and polarization qubit on a single photon. We demonstrate precise control over phase of the path qubit to change the measurement basis and experimentally demonstrate properties of measurement-based quantum computing using a two-photon, three-qubit cluster state.

  13. Newman's theory of health as expanding consciousness: a personal evolution.

    Science.gov (United States)

    Bateman, Gina C; Merryfeather, Lyn

    2014-01-01

    In this article, the authors demonstrate the value of using Newman's theory of health as expanding consciousness for nurses and the clients they serve. A review of the conception and evolution of the theory and its link to spiritual ideology provides a multi-dimensional perspective of Newman's ideas. Additionally, an exploration of the central concepts of the theory offers an in-depth view of the philosophical and practical tenets on which the theory is based. The authors also chronicle one nurse's journey and evolution as a healthcare provider whose practice is rooted in Newman's theory.

  14. Beyond the numbers: expanding the boundaries of neuropsychology.

    Science.gov (United States)

    Perry, William

    2009-02-01

    Beyond the Numbers: Expanding the Boundaries of Neuropsychology was Dr Perry's 2007 presidential address in the annual conference of the National Academy of Neuropsychology. In his address he discussed the achievements of the science of neuropsychology and highlighted some areas that exemplified the expansion of the boundaries of neuropsychology. These areas are: (i) the study of neuropsychological functioning in new or non-traditional populations, particularly seemingly healthy people and people with non-brain diseases; (ii) the interface of cognition and genetics; (iii) the use of the process approach as a means of understanding brain functioning; and (iv) a translational application to the science of neuropsychology.

  15. Beyond the Numbers: Expanding the Boundaries of Neuropsychology†

    Science.gov (United States)

    Perry, William

    2009-01-01

    Beyond the Numbers: Expanding the Boundaries of Neuropsychology was Dr Perry's 2007 presidential address in the annual conference of the National Academy of Neuropsychology. In his address he discussed the achievements of the science of neuropsychology and highlighted some areas that exemplified the expansion of the boundaries of neuropsychology. These areas are: (i) the study of neuropsychological functioning in new or non-traditional populations, particularly seemingly healthy people and people with non-brain diseases; (ii) the interface of cognition and genetics; (iii) the use of the process approach as a means of understanding brain functioning; and (iv) a translational application to the science of neuropsychology. PMID:19395354

  16. Expanding the use of hepatitis C-viremic kidney donors.

    Science.gov (United States)

    Sawinski, Deirdre; Wyatt, Christina M; Locke, Jayme E

    2017-11-01

    Direct-acting antivirals have revolutionized the treatment of hepatitis C virus (HCV) infection in patients with chronic kidney disease, with implications for the timing of antiviral treatment among kidney transplant candidates and for the use of HCV viremic donors. A recent consensus conference reviewed the available data on the safety and cost-effectiveness of expanding access to HCV-positive organs to HCV-negative recipients. Early trials are promising, but larger trials and a plan for obtaining HCV therapy in the posttransplantation period are needed. Implications for the larger transplant community also need to be considered. Copyright © 2017 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.

  17. Hydrodynamization and transient modes of expanding plasma in kinetic theory

    CERN Document Server

    Heller, Michal P; Spalinski, Michal

    2016-01-01

    We study the transition to hydrodynamics in a weakly-coupled model of quark-gluon plasma given by kinetic theory in the relaxation time approximation. Our studies uncover qualitative similarities to the results on hydrodynamization in strongly coupled gauge theories. In particular, we demonstrate that the gradient expansion in this model has vanishing radius of convergence. The asymptotic character of the hydrodynamic gradient expansion is crucial for the recently discovered applicability of hydrodynamics at large gradients. Furthermore, the analysis of the resurgent properties of the series provides, quite remarkably, indication for the existence of a novel transient, damped oscillatory mode of expanding plasmas in kinetic theory.

  18. PD-1 Blockade Expands Intratumoral Memory T Cells

    DEFF Research Database (Denmark)

    Ribas, Antoni; Shin, Daniel Sanghoon; Zaretsky, Jesse

    2016-01-01

    Tumor responses to programmed cell death protein 1 (PD-1) blockade therapy are mediated by T cells, which we characterized in 102 tumor biopsies obtained from 53 patients treated with pembrolizumab, an antibody to PD-1. Biopsies were dissociated, and single-cell infiltrates were analyzed by multi...... with regressing melanoma. In conclusion, PD-1 blockade increases the frequency of T cells, B cells, and myeloid-derived suppressor cells in tumors, with the CD8+ effector memory T-cell subset being the major T-cell phenotype expanded in patients with a response to therapy....

  19. Debate on expanding survey of near Earth objects

    Science.gov (United States)

    Showstack, Randy

    NASA officials told a U.S. House of Representatives Science Subcommittee on 3 October that a ground-based survey to detect near-Earth objects (NEOs) is on target for achieving its goals. The NEOs that are the subject of the survey are those 1 km across or larger, and could therefore cause devastating damage if they collided with Earth.Representatives of NASA, the National Research Council, and other agencies also told the subcommittee that astronomers and policy-makers need to consider whether to expand the survey to scan for even smaller NEOs that also could inflict widespread damage to Earth on collision.

  20. Expanding the Design Space: Forging the Transition from 3D Printing to Additive Manufacturing

    Science.gov (United States)

    Amend, Matthew

    The synergy of Additive Manufacturing and Computational Geometry has the potential to radically expand the "design space" of solutions available to designers. Additive Manufacturing (AM) is capable of fabricating objects that are highly complex both in geometry and material properties. However, the introduction of any new technology can have a disruptive effect on established design practices and organizations. Before "Design for Additive Manufacturing" (DFAM) is a commonplace means of producing objects employed in "real world" products, appropriate design knowledge must be sufficiently integrated within industry. First, materials suited to additive manufacturing methods must be developed to satisfy existing industry standards and specifications, or new standards must be developed. Second, a new class of design representation (CAD) tools will need to be developed. Third, designers and design organizations will need to develop strategies for employing such tools. This thesis describes three DFAM exercises intended to demonstrate the potential for innovative design when using advanced additive materials, tools, and printers. These design exercises included 1) a light-weight composite layup mold developed with topology optimization, 2) a low-pressure fluid duct enhanced with an external lattice structure, and 3) an airline seat tray designed using a non-uniform lattice structure optimized with topology optimization.

  1. Building Energy Storage Panel Based on Paraffin/Expanded Perlite: Preparation and Thermal Performance Study

    Directory of Open Access Journals (Sweden)

    Xiangfei Kong

    2016-01-01

    Full Text Available This study is focused on the preparation and performance of a building energy storage panel (BESP. The BESP was fabricated through a mold pressing method based on phase change material particle (PCMP, which was prepared in two steps: vacuum absorption and surface film coating. Firstly, phase change material (PCM was incorporated into expanded perlite (EP through a vacuum absorption method to obtain composite PCM; secondly, the composite PCM was immersed into the mixture of colloidal silica and organic acrylate, and then it was taken out and dried naturally. A series of experiments, including differential scanning calorimeter (DSC, scanning electron microscope (SEM, best matching test, and durability test, have been conducted to characterize and analyze the thermophysical property and reliability of PCMP. Additionally, the thermal performance of BESP was studied through a dynamic thermal property test. The results have showed that: (1 the surface film coating procedure can effectively solve the leakage problem of composite phase change material prepared by vacuum impregnation; (2 the optimum adsorption ratio for paraffin and EP was 52.5:47.5 in mass fraction, and the PCMP has good thermal properties, stability, and durability; and (3 in the process of dynamic thermal performance test, BESP have low temperature variation, significant temperature lagging, and large heat storage ability, which indicated the potential of BESP in the application of building energy efficiency.

  2. Building Energy Storage Panel Based on Paraffin/Expanded Perlite: Preparation and Thermal Performance Study.

    Science.gov (United States)

    Kong, Xiangfei; Zhong, Yuliang; Rong, Xian; Min, Chunhua; Qi, Chengying

    2016-01-25

    This study is focused on the preparation and performance of a building energy storage panel (BESP). The BESP was fabricated through a mold pressing method based on phase change material particle (PCMP), which was prepared in two steps: vacuum absorption and surface film coating. Firstly, phase change material (PCM) was incorporated into expanded perlite (EP) through a vacuum absorption method to obtain composite PCM; secondly, the composite PCM was immersed into the mixture of colloidal silica and organic acrylate, and then it was taken out and dried naturally. A series of experiments, including differential scanning calorimeter (DSC), scanning electron microscope (SEM), best matching test, and durability test, have been conducted to characterize and analyze the thermophysical property and reliability of PCMP. Additionally, the thermal performance of BESP was studied through a dynamic thermal property test. The results have showed that: (1) the surface film coating procedure can effectively solve the leakage problem of composite phase change material prepared by vacuum impregnation; (2) the optimum adsorption ratio for paraffin and EP was 52.5:47.5 in mass fraction, and the PCMP has good thermal properties, stability, and durability; and (3) in the process of dynamic thermal performance test, BESP have low temperature variation, significant temperature lagging, and large heat storage ability, which indicated the potential of BESP in the application of building energy efficiency.

  3. Building Energy Storage Panel Based on Paraffin/Expanded Perlite: Preparation and Thermal Performance Study

    Science.gov (United States)

    Kong, Xiangfei; Zhong, Yuliang; Rong, Xian; Min, Chunhua; Qi, Chengying

    2016-01-01

    This study is focused on the preparation and performance of a building energy storage panel (BESP). The BESP was fabricated through a mold pressing method based on phase change material particle (PCMP), which was prepared in two steps: vacuum absorption and surface film coating. Firstly, phase change material (PCM) was incorporated into expanded perlite (EP) through a vacuum absorption method to obtain composite PCM; secondly, the composite PCM was immersed into the mixture of colloidal silica and organic acrylate, and then it was taken out and dried naturally. A series of experiments, including differential scanning calorimeter (DSC), scanning electron microscope (SEM), best matching test, and durability test, have been conducted to characterize and analyze the thermophysical property and reliability of PCMP. Additionally, the thermal performance of BESP was studied through a dynamic thermal property test. The results have showed that: (1) the surface film coating procedure can effectively solve the leakage problem of composite phase change material prepared by vacuum impregnation; (2) the optimum adsorption ratio for paraffin and EP was 52.5:47.5 in mass fraction, and the PCMP has good thermal properties, stability, and durability; and (3) in the process of dynamic thermal performance test, BESP have low temperature variation, significant temperature lagging, and large heat storage ability, which indicated the potential of BESP in the application of building energy efficiency. PMID:28787870

  4. USE OF COVERED SELF-EXPANDABLE NITINOL STENT FOR ANASTOMOTIC BILIARY STRUCTURE MANAGEMENT AFTER LIVER TRANSPLANTATION: THE FIRST EXPERIENCE

    Directory of Open Access Journals (Sweden)

    M. N. Kornilov

    2013-01-01

    Full Text Available Aim. The aim of this study focuses on the first experience with self-expandable stents, analysis of its efficacy and safety in the treatment of anastomotic strictures after liver transplantation. Materials and methods. There’re 136 liver transplantations performed from 2004 till 2012. To correct anastomotic strictures we’ve used only the self-expandable coated nitinol stent. We performed stenting in 7 recipient. Result. In 131 liver transplant recipients incidence of biliary strictures has been 5.3%. All of 5 patients have been managed by retrograde or antegrade way. Conclusion. Our first experience demonstrate efficacy and safety of the used tecniques up to 24 months. The analysis of more long-term results is required. 

  5. Expanded Analysis of Hot Isostatic Pressed Iodine-Loaded Silver-Exchanged Mordenite

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R. T. [ORNL; Bruffey, S. H. [ORNL; Patton, K. K. [ORNL

    2014-09-30

    Reduced silver-exchanged mordenite (Ag0Z) is being evaluated as a potential material to control the release of radioactive iodine that is released during the reprocessing of used nuclear fuel into the plant off-gas streams. The purpose of this study was to determine if hot pressing could directly convert this iodine loaded sorbent into a waste form suitable for long-term disposition. The minimal pretreatment required for production of pressed pellets makes hot pressing a technically and economically desirable process. Initial scoping studies utilized hot uniaxial pressing (HUPing) to prepare samples of non-iodine-loaded reduced silver exchanged mordenite (Ag0Z). The resulting samples were very fragile due to the low pressure (~ 28 MPa) used. It was recommended that hot isostatic pressing (HIPing), performed at higher temperatures and pressures, be investigated. HIPing was carried out in two phases, with a third and final phase currently underway. Phase I evaluated the effects of pressure and temperature conditions on the manufacture of a pressed sample. The base material was an engineered form of silver zeolite. Six samples of Ag0Z and two samples of I-Ag0Z were pressed. It was found that HIPing produced a pressed pellet of high density. Analysis of each pressed pellet by scanning electron microscopy-energy dispersive spectrophotometry (SEM-EDS) and X-ray diffraction (XRD) demonstrated that under the conditions used for pressing, the majority of the material transforms into an amorphous structure. The only crystalline phase observed in the pressed Ag0Z material was SiO2. For the samples loaded with iodine (I-Ag0Z) iodine was present as AgI clusters at low temperatures, and transformed into AgIO4 at high temperatures. Surface mapping and EDS demonstrate segregation between silver iodide phases and silicon dioxide phases. Based on the results of the Phase I study, an expanded test matrix was developed to examine the effects of multiple source materials, compositional

  6. Hyaluronic acid enhancement of expanded polytetrafluoroethylene for small diameter vascular grafts

    Science.gov (United States)

    Lewis, Nicole R.

    Cardiovascular disease is the leading cause of mortality and morbidity in the United States and other developed countries. In the United States alone, 8 million people are diagnosed with peripheral arterial disease per year and over 250,000 patients have coronary bypass surgery each year. Autologous blood vessels are the standard graft used in small diameter (<6mm) arterial bypass procedures. Synthetic small diameter grafts have had limited success. While polyethylene (Dacron) and expanded polytetrafluoroethylene (ePTFE) are the most commonly used small diameter synthetic vascular graft materials, there are significant limitations that make these materials unfavorable for use in the low blood flow conditions of the small diameter arteries. Specifically, Dacron and ePTFE grafts display failure due to early thrombosis or late intimal hyperplasia. With the shortage of tissue donors and the limited supply of autologous blood vessels available, there is a need for a small diameter synthetic vascular graft alternative. The aim of this research is to create and characterize ePTFE grafts prepared with hyaluronic acid (HA), evaluate thrombogenic potential of ePTFE-HA grafts, and evaluate graft mechanical properties and coating durability. The results in this work indicate the successful production of ePTFE-HA materials using a solvent infiltration technique. Surface interactions with blood show increased platelet adhesion on HA-modified surfaces, though evidence may suggest less platelet activation and erythrocyte lysis. Significant changes in mechanical properties of HA-modified ePTFE materials were observed. Further investigation into solvent selection, uniformity of HA, endothelialization, and dynamic flow testing would be beneficial in the evaluation of these materials for use in small diameter vascular graft bypass procedures.

  7. Suppressors made from intermetallic materials

    Energy Technology Data Exchange (ETDEWEB)

    Klett, James W; Muth, Thomas R; Cler, Dan L

    2014-11-04

    Disclosed are several examples of apparatuses for suppressing the blast and flash produced as a projectile is expelled by gases from a firearm. In some examples, gases are diverted away from the central chamber to an expansion chamber by baffles. The gases are absorbed by the expansion chamber and desorbed slowly, thus decreasing pressure and increasing residence time of the gases. In other examples, the gases impinge against a plurality of rods before expanding through passages between the rods to decrease the pressure and increase the residence time of the gases. These and other exemplary suppressors are made from an intermetallic material composition for enhanced strength and oxidation resistance at high operational temperatures.

  8. Surgical treatment of children with scars on the lower leg and in the area of Achilles tendon using expander dermatension

    Directory of Open Access Journals (Sweden)

    O. V. Filippova

    2015-01-01

    Full Text Available Treatment of scar deformities of shin and ankle is traditionally a challenge due to significant functional load to the segment and the surface location of the Achilles tendon. Published data indicates that the use of expander dermotension of shin is not widespread and poorly covered in the literature [6]. Available data in the literature devoted to the expander dermotension of shin, are characterized by individual observations. There are no clear guidelines for size selection of the expander, for the protocol of its filling and postoperative regime. The purpose was to study the peculiarities of tissue dermotension of shin and development of recommendations for the use of this method to recover the full skin of shin and area of the Achilles tendon. Materials and Methods. Full restoration of the skin on the leg in the area of the Achilles tendon using tissue dermotension was performed in 24 patients in the clinic of Turner Scientific and Research Institute for Children’s Orthopedics from 2009 to 2014. To perform dermotension we used tissue expanders Eurosilicone (France, st. reg. № FSZ 2010/07171 from 09.06.2010; atraumatic suture material. Results. Complications amounted to 12.5% of all observations, and included: migration of port expander, marginal necrosis on line surgical suture and transient swelling of the foot. Efficacy of treatment was evaluated according to the following criteria: 1 the restoration of full cover in the region of the scar deformation; 2 elimination of adhesions, restore slip anatomical structures; 3 the increase of the amplitude of motion of the ankle joint. All patients achieved clinical improvement 2-3 criteria that considered a good result. Complications did not have a significant impact on the final result of the treatment. Conclusions: 1. Expandera dermatensia is an effective way to full recovery of the skin on the calf and the Achilles tendon. 2. Capsule forming around the expander and part of the flap, which

  9. Characterization of the Capsule Surrounding Smooth and Textured Tissue Expanders and Correlation with Contracture

    Directory of Open Access Journals (Sweden)

    Erika Kuriyama, MD

    2017-07-01

    Full Text Available Background:. Capsular contracture is a common complication after breast augmentation surgery. This study pathologically evaluated the soft-tissue response to surface modifications in both smooth and textured tissue expander prostheses. Methods:. Smooth tissue expanders and textured tissue expanders in 5 cases each were used for breast reconstruction after mastectomy. Histological samples were harvested from the capsules when the tissue expanders were replaced by silicone implants. Collagen orientation and cellular responses were assessed histologically. Capsular contracture was evaluated using the Baker classification 6 months and 2 years after the removal of the tissue expander. Results:. The capsules surrounding the smooth tissue expanders tended to produce more contracture than those surrounding the textured tissue expanders. The collagen architecture of the capsules of the smooth tissue expanders showed random orientation with fragmentation. Conversely, the capsules of the textured tissue expanders showed parallel orientation with collagen bundles of almost normal structure. Significantly more fibrils of elastin and myofibroblasts were found in the capsules surrounding the smooth tissue than in those surrounding the textured ones. Conclusions:. The collagen fibers surrounding the smooth tissue expanders could be cracked during expansion, which may lead to scarring and contracture. Conversely, the collagen orientation surrounding the textured tissue expanders was excellent. Moreover, the increase in elastic fibers and myofibroblasts in the capsules surrounding the smooth tissue expanders may be associated with in vivo contraction patterns. Therefore, the surface type of tissue expanders affects capsular contraction after replacement with definitive implants.

  10. The chiral magnetic wave in an expanding QCD fluid

    CERN Document Server

    Taghavi, Seyed Farid

    2015-01-01

    As a consequence of the chiral anomaly, the hydrodynamics of hot QCD matter coupled to QED allows for a long-wavelength mode of chiral charge density, the chiral magnetic wave (CMW), that provides for a mechanism of electric charge separation along the direction of an external magnetic field. Here, we investigate the efficiency of this mechanism for values of the time-dependent magnetic field and of the energy density attained in the hot QCD matter of ultra-relativistic heavy ion collisions. To this end, we derive the CMW equations of motion for expanding systems by treating the CMW as a charge perturbation on top of an expanding Bjorken-type background field in the limit of small chemical potential. Both, approximate analytical and full numerical solutions to these equations of motion indicate that for the lifetime and thermodynamic conditions of ultra-relativistic heavy ion collisions, the efficiency of CMW-induced electric charge separation decreases with increasing center of mass energy and that the effec...

  11. B-HEX pupil expander: Pupil expansion redefined.

    Science.gov (United States)

    Bhattacharjee, Suven

    2017-12-01

    The B-HEX® Pupil Expander (Med Invent Devices) is a disposable 6.5 mm flexible hexagonal device with notches at corners and flanges at sides. Alternate flanges with positioning holes are tucked under the iris to engage the notches to the margin of the pupil to provide a 5.5 mm expanded pupil. Unlike devices with scrolls or pockets which require an injector to avoid snagging the incision, the preloaded B-HEX is inserted and removed through a 1 mm or larger incision using a manipulator or 23-gauge micro-forceps. The thin profile and uniplanar design allow unhindered instrument movement during phacoemulsification, cortical cleaning, and intraocular lens implantation. The B-HEX is safely used even after capsulorhexis since the thin uniplanar notches are directly visualized to avoid the capsule margin. It is useful in coaxial phacoemulsification, coaxial sub 2.00 mm micro incision cataract surgery (MICS), biaxial 1.5 mm MICS, femtosecond laser assisted cataract surgery (FLACS), small pupil pars plana vitrectomy, and shallow anterior chamber eyes.

  12. Atypical expanded-spectrum hemifacial microsomia: a case report.

    Science.gov (United States)

    Magge, Keshav T; Kim, Jacqueline; Rogers, Gary F; Oh, Albert K

    2015-03-01

    Objective : To present the case report of a patient with expanded hemifacial microsomia (HFM) that illustrates the complex interactions of these embryogenic factors and to review current theories and mechanism regarding the etiopathogenesis of HFM. Design and Method : We present the case of an African American girl who was born at full term by cesarean section and transferred to our institution for systemic malformations. Her craniofacial findings include holoprosencephaly, cleft lip and palate, low set and posteriorly rotated ears, flat midfacial features, micrognathia, left HFM with grade 1 microtia, hypoplastic mandible, and a small preauricular pharyngeal arch remnant. Systemic anomalies included ectopic kidney, atrial-septal defect, bilateral hip dysplasia, bilateral humeroradial fusion, bilateral club feet, and bilateral low-set thumbs with the right side also being triphalangeal. Genetic evaluation did not identify a molecular diagnosis or other known syndrome. Conclusions : Although vasculogenic disruption of the stapedial artery during early fetal gestation has been implicated in the etiology of HFM, the grouping and bilateral findings seen in our patient argue against this relatively simple and localized phenomenon. Instead, such diverse and widespread anomalies in the setting of expanded spectrum HFM seem to support the theory of a disorder in blastogenesis as the cause of HFM.

  13. Controlled Shrinkage of Expanded Glass Particles in Metal Syntactic Foams.

    Science.gov (United States)

    Al-Sahlani, Kadhim; Taherishargh, Mehdi; Kisi, Erich; Fiedler, Thomas

    2017-09-13

    Metal matrix syntactic foams have been fabricated via counter-gravity infiltration of a packed bed of recycled expanded glass particles (EG) with A356 aluminum alloy. Particle shrinkage was studied and has been utilized to increase the particles' strength and tailor the mechanical properties of the expanded glass/metal syntactic foam (EG-MSF). The crushing strength of particles could be doubled by shrinking them for 20 min at 700 °C. Owing to the low density of EG (0.20-0.26 g/cm³), the resulting foam exhibits a low density (1.03-1.19 g/cm³) that increases slightly due to particle shrinkage. Chemical and physical analyses of EG particles and the resulting foams were conducted. Furthermore, metal syntactic foam samples were tested in uni-axial compression tests. The stress-strain curves obtained exhibit three distinct regions: elastic deformation followed by a stress plateau and densification commencing at 70-80% macroscopic strain. Particle shrinkage increased the mechanical strength of the foam samples and their average plateau stress increased from 15.5 MPa to 26.7 MPa.

  14. Journal impact factor in the era of expanding literature.

    Science.gov (United States)

    Andersen, Julia; Belmont, John; Cho, Cheng T

    2006-12-01

    The Journal Citation Reports (JCR) of the Science Citation Index (SCI), published by the Institute of Scientific Information (ISI), provides a comprehensive database for analysis of journals. Recent use of JCR's journal impact factor for evaluation of journals and authors has provoked strongly mixed reactions among investigators. This paper examines the effects of the rapidly expanding literature on the impact factor over the past decade and examines the limitations of journal impact factor for evaluating individual author's contributions. The JCR analyzed 6088 journals in 2005, a 32% increase in new listings since 1995. During the same period, there was a 39% increase in new journal listings in the infectious diseases category. The phenomenon of journal proliferation has had a profound effect on the journal impact factor. During the past decade an increased impact factor was observed in 92% of the top ranking major journals, especially in young and rapidly expanding research fields. Certain highly cited new journals published primarily review articles - not original contributions. There was no increase in impact factor among some of the best known journals, such as Journal of Experimental Medicine, Proceedings of the National Academy of Sciences (USA), and Journal of Infectious Diseases. Clearly, journal impact factor is an imperfect tool for measuring the quality of articles, and its use in evaluating authors has inherent risks. In spite of its limitations, journal impact factor can be used as a rough indicator of scientific quality in specific subject categories and for serious reading and learning.

  15. Dynamic Decompressive Craniotomy with a Novel Reversibly Expandable Plate.

    Science.gov (United States)

    Khanna, Rohit

    2017-07-01

    Objective To assess the feasibility of a dynamic craniotomy procedure with the use of a novel reversibly expandable cranial bone flap fixation plate. The expandable plate allows outward bone flap migration with an increase in intracranial volume or intracranial pressure (ICP). Methods Dynamic craniotomy intracranial hypertension compliance was evaluated in a skull model with progressive increase in intracranial volume and compared with the standard craniotomy with fixed plates. Results Dynamic craniotomy provided significant control of ICP with increasing intracranial volume compared with the standard craniotomy. With an incremental increase in intracranial volume from 360 mL to 600 mL, the ICP increased from 2.6 to 91.9 mm Hg with the standard craniotomy, whereas with the dynamic craniotomy the ICP for similar intracranial volume increased from 2.5 to 25 mm Hg (p < 0.00001). Conclusions The dynamic craniotomy procedure provides superior control of ICP with an abrupt intracranial volume increase when compared with the standard craniotomy. Georg Thieme Verlag KG Stuttgart · New York.

  16. Expanding refractory rectus sheath hematoma: a therapeutic dilemma.

    Science.gov (United States)

    Tseng, Guo-Shiang; Liau, Guo-Shiou; Shyu, Hann-Yeh; Chu, Shi-Jye; Ko, Fu-Chang; Wu, Kuo-An

    2012-01-01

    Rectus sheath hematoma is an uncommon but well-described complication of a tussive paroxysm. It is an accumulation of blood within the sheath of the rectus abdominis secondary to disruption of the epigastric vessels or the rectus muscle and is often misdiagnosed as acute abdomen. Increases in the number of elderly patients and the use of therapeutic anticoagulation may increase the prevalence and severity of rectus sheath hematomas encountered in clinical practice. Expanding rectus sheath hematomas are occasionally refractory to conservative treatment and may require hemostatic intervention. Here, we describe the case of an 87-year-old woman who presented with two separate rectus sheath hematomas that were precipitated by a paroxysm of coughing. Repeated computed tomography showed two separate expanding rectus sheath hematomas, which were not accompanied by obvious contrast extravasation on angiography. Empiric left inferior epigastric artery embolization resulted in rapid hemodynamic stabilization, and the hematomas shrank gradually. Early empiric transcatheter arterial embolization may be appropriate for patients who are poor surgical candidates and have enlarging hematomas that are refractory to conservative treatment.

  17. An expanded model of faculty vitality in academic medicine.

    Science.gov (United States)

    Dankoski, Mary E; Palmer, Megan M; Nelson Laird, Thomas F; Ribera, Amy K; Bogdewic, Stephen P

    2012-12-01

    Many faculty in today's academic medical centers face high levels of stress and low career satisfaction. Understanding faculty vitality is critically important for the health of our academic medical centers, yet the concept is ill-defined and lacking a comprehensive model. Expanding on previous research that examines vital faculty in higher education broadly and in academic medical centers specifically, this study proposes an expanded model of the unique factors that contribute to faculty vitality in academic medicine. We developed an online survey on the basis of a conceptual model (N = 564) and used linear regression to investigate the fit of the model. We examined the relationships of two predictor variables measuring Primary Unit Climate and Leadership and Career and Life Management with an overall Faculty Vitality index comprised of three measures: Professional Engagement, Career Satisfaction, and Productivity. The findings revealed significant predictive relationships between Primary Unit Climate and Leadership, Career and Life Management, and Faculty Vitality. The overall model accounted for 59% of the variance in the overall Faculty Vitality Index. The results provide new insights into the developing model of faculty vitality and inform initiatives to support faculty in academic medical centers. Given the immense challenges faced by faculty, now more than ever do we need reliable evidence regarding what sustains faculty vitality.

  18. Turbulent Flame Speed and Self Similarity of Expanding Premixed Flames

    Science.gov (United States)

    Chaudhuri, Swetaprovo; Wu, Fujia; Zhu, Delin; Law, Chung

    2011-11-01

    In this study we present experimental turbulent flame speed data measured in constant-pressure expanding turbulent flames, propagating in nearly homogenous isotropic turbulence, in a dual-chamber, fan-stirred vessel. The cold flow is characterized by high speed particle image velocimetry while the flame propagation rate is obtained by tracking high speed Schlieren images of unity Lewis number methane-air flames over wide ranges of pressure and turbulence intensity. It is found that the normalized turbulent flame speed as a function of the average radius scales as a turbulent Reynolds number to the one-half power, where the average radius is the length scale and thermal diffusivity is the transport property, thus showing self-similar propagation. Utilizing this dependence it is found that the turbulent flame speeds from expanding flames and those from Bunsen geometries can be scaled by a single parameter: the turbulent Reynolds number utilizing recent theoretical results obtained by spectral closure of the G equation, after correcting for gas expansion effects.

  19. Virtual materiality

    DEFF Research Database (Denmark)

    Søndergaard, Dorte Marie

    . Butler, J. (1993) Bodies that Matter. On the Discursive Limits of “Sex”. London: Routledge. Durkin, K. et al. (1998) Children, Media and Agression. Current Research in Australia and New Zealand. In: Carlson, U. & von Feilitzen, C. (red): Children and Media Violence. Yearbook from the UNESCO International...... be discarded as analytical input to discussions about materiality? How far can we develop and stretch our conceptual understanding of the material? (Søndergaard 2009b) Theorizing creates new patterns of visibility and invisibility - with all the potentialities in between. Bullying research is a field that begs...... for new theorizing and new analytical tools. (Søndergaard 2008, 2009a) It is a field that deals with children’s individual and collective processes of becoming, of materializing and of entering in and as agentic part(ner)s of the human and non-human world. But current theoretical premises in that field...

  20. Atmospheric materiality

    DEFF Research Database (Denmark)

    Wieczorek, Izabela

    2016-01-01

    A disjunction between the material and the immaterial has been at the heart of the architectural debate for decades. In this dialectic tension, the notion of atmosphere which increasingly claims attention in architectural discourse seems to be parallactic, leading to the re-evaluation of perceptual...... experience and, consequently, to the conceptual and methodological shifts in the production of space, and hence in the way we think about materiality. In this context, architectural space is understood as a contingent construction – a space of engagement that appears to us as a result of continuous...... and complex interferences revealed through our perception; ‘the atmospheric’ is explored as a spatial and affective quality as well as a sensory background, and materiality as a powerful and almost magical agency in shaping of atmosphere. Challenging existing dichotomies and unraveling intrinsic...

  1. Layered materials

    Science.gov (United States)

    Johnson, David; Clarke, Simon; Wiley, John; Koumoto, Kunihito

    2014-06-01

    Layered compounds, materials with a large anisotropy to their bonding, electrical and/or magnetic properties, have been important in the development of solid state chemistry, physics and engineering applications. Layered materials were the initial test bed where chemists developed intercalation chemistry that evolved into the field of topochemical reactions where researchers are able to perform sequential steps to arrive at kinetically stable products that cannot be directly prepared by other approaches. Physicists have used layered compounds to discover and understand novel phenomena made more apparent through reduced dimensionality. The discovery of charge and spin density waves and more recently the remarkable discovery in condensed matter physics of the two-dimensional topological insulating state were discovered in two-dimensional materials. The understanding developed in two-dimensional materials enabled subsequent extension of these and other phenomena into three-dimensional materials. Layered compounds have also been used in many technologies as engineers and scientists used their unique properties to solve challenging technical problems (low temperature ion conduction for batteries, easy shear planes for lubrication in vacuum, edge decorated catalyst sites for catalytic removal of sulfur from oil, etc). The articles that are published in this issue provide an excellent overview of the spectrum of activities that are being pursued, as well as an introduction to some of the most established achievements in the field. Clusters of papers discussing thermoelectric properties, electronic structure and transport properties, growth of single two-dimensional layers, intercalation and more extensive topochemical reactions and the interleaving of two structures to form new materials highlight the breadth of current research in this area. These papers will hopefully serve as a useful guideline for the interested reader to different important aspects in this field and

  2. Magnetic Materials

    Science.gov (United States)

    1985-03-01

    L -:• •.1 S..+.: s• S,’S .+m • , ++ d ’N .,.++.+ ii L+ i+- -..’ *4’.. ’-t. COMM4ITTEE ON MAGNETIC MATERIALS Chairman ROBERT M. WRITE, Principal...Motors; Sung Ho Jin, AT&T Bell Labs; G. Rodrigue, ... -- =.• Georgia Tech; J. Houze , Allegheny-Ludlum; R. Sundahl, AT&T Bell Labs; (. I... R. O’Handley...this report. Robert M. White Chairman *’-’ . ,i-.. .- ABSTRACT Magnetic materials play a fundamental role in many of the electrical and electronic

  3. Electronic materials

    CERN Document Server

    Kwok, H L

    2010-01-01

    The electronic properties of solids have become of increasing importance in the age of information technology. The study of solids and materials, while having originated from the disciplines of physics and chemistry, has evolved independently over the past few decades. The classical treatment of solid-state physics, which emphasized classifications, theories and fundamental physical principles, is no longer able to bridge the gap between materials advances and applications. In particular, the more recent developments in device physics and technology have not necessarily been driven by new conc

  4. Emerging Materiality

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Breinbjerg, Morten; Pold, Søren

    2009-01-01

    The authors examine how materiality emerges from complex chains of mediation in creative software use. The primarily theoretical argument is inspired and illustrated by interviews with two composers of electronic music. The authors argue that computer mediated activity should not primarily...

  5. Creating Materials.

    Science.gov (United States)

    Yin, Mary

    1990-01-01

    Describes practical materials that relate to places within the English-as-a-Second-Language learner's own community, such as the supermarket, local fast food restaurants, pharmacy, and library. Each literacy booklet contains approximately 35 pages of activities that can be used as classroom handouts. (LB)

  6. Supplementary Material

    Indian Academy of Sciences (India)

    mraga

    1. Supplementary Material. A soluble-lead Redox Flow Battery with corrugated graphite sheet and reticulated vitreous carbon as positive and negative current collectors by A Banerjee et al (pp 163-. 170). Figure S1. SEM images for bare substrates: (a) graphite sheet, (b) 20 ppi RVC, (c) 30 ppi. RVC and (d) 45 ppi RVC.

  7. Flexural Behaviour Of Reinforced Concrete Beams Containing Expanded Glass As Lightweight Aggregates

    OpenAIRE

    Khatib Jamal; Jefimiuk Adrian; Khatib Sammy

    2015-01-01

    The flexural properties of reinforced concrete beams containing expanded glass as a partial fine aggregate (sand) replacement are investigated. Four concrete mixes were employed to conduct this study. The fine aggregate was replaced with 0%, 25%, 50% and 100% (by volume) expanded glass. The results suggest that the incorporation of 50% expanded glass increased the workability of the concrete. The compressive strength was decreasing linearly with the increasing amount of expanded glass. The du...

  8. New Cork-Based Materials and Applications

    Directory of Open Access Journals (Sweden)

    Luís Gil

    2015-02-01

    Full Text Available This review work is an update of a previous work reporting the new cork based materials and new applications of cork based materials. Cork is a material which has been used for multiple applications. The most known uses of cork are in stoppers (natural and agglomerated cork for alcoholic beverages, classic floor covering with composite cork tiles (made by the binding of cork particles with different binders, and thermal/acoustic/vibration insulation with expanded corkboard in buildings and some other industrial fields. Many recent developments have been made leading to new cork based materials. Most of these newly developed cork materials are not yet on the market, but they represent new possibilities for engineers, architects, designers and other professionals which must be known and considered, potentially leading to their industrialization. This paper is a review covering the last five years of innovative cork materials and applications also mentioning previous work not reported before.

  9. New Cork-Based Materials and Applications.

    Science.gov (United States)

    Gil, Luís

    2015-02-10

    This review work is an update of a previous work reporting the new cork based materials and new applications of cork based materials. Cork is a material which has been used for multiple applications. The most known uses of cork are in stoppers (natural and agglomerated cork) for alcoholic beverages, classic floor covering with composite cork tiles (made by the binding of cork particles with different binders), and thermal/acoustic/vibration insulation with expanded corkboard in buildings and some other industrial fields. Many recent developments have been made leading to new cork based materials. Most of these newly developed cork materials are not yet on the market, but they represent new possibilities for engineers, architects, designers and other professionals which must be known and considered, potentially leading to their industrialization. This paper is a review covering the last five years of innovative cork materials and applications also mentioning previous work not reported before.

  10. Tuneable porous carbonaceous materials from renewable resources.

    Science.gov (United States)

    White, Robin J; Budarin, Vitaly; Luque, Rafael; Clark, James H; Macquarrie, Duncan J

    2009-12-01

    Porous carbon materials are ubiquitous with a wide range of technologically important applications, including separation science, heterogeneous catalyst supports, water purification filters, stationary phase materials, as well as the developing future areas of energy generation and storage applications. Hard template routes to ordered mesoporous carbons are well established, but whilst offering different mesoscopic textural phases, the surface of the material is difficult to chemically post-modify and processing is energy, resource and step intensive. The production of carbon materials from biomass (i.e. sugars or polysaccharides) is a relatively new but rapidly expanding research area. In this tutorial review, we compare and contrast recently reported routes to the preparation of porous carbon materials derived from renewable resources, with examples of our previously reported mesoporous polysaccharide-derived "Starbon" carbonaceous material technology.

  11. Expanded Access Programme: looking for a common definition.

    Science.gov (United States)

    Iudicello, Antonella; Alberghini, Lucia; Benini, Giulia; Mosconi, Paola

    2016-01-12

    Therapeutic use of an unauthorised drug (or of an authorised drug for an unauthorised indication) for patients with a life-threating disease is permitted outside a clinical trial as an Expanded Access Programme (EAP).The regulations regarding EAPs is not the same all over the world. For example, the recommendation of the European Medicines Agency (EMA) in EU countries also includes within EAPs patients who have been treated in a clinical trial and who wish to continue the treatment. Nevertheless, the patients treated in a clinical trial could have the option of continuing treatment for an extended period in an Open-label Extension study, aimed to generate long-term data on efficacy, safety, tolerability and administration.The aims of this paper - based on the difficulties and incoherence encountered by an Italian Ethic Committee (EC) during the authorisation process of EAPs - are: understanding the origin of this misclassification by analysing differences and similarities among USA, European and Italian regulations concerning EAPs; and showing difficulties in classifying international study protocols as a consequence of the lack of harmonisation of definitions.We performed a critical review of the current USA, European and Italian regulations and we analysed some practical cases by retrieving protocols from Clinicaltrials.gov and the Italian Clinical Trials Registry (OsSC) containing in the title the keywords 'Expanded Access Programme', "'Expanded Access', 'Open-label Extension study' or 'Early Access'.We observed that the Food and Drug Administration ( FDA) definition of EAP is very clear while the EMA definition is similar to that of an Open-label Extension study. This lack of a clear definition generates misclassification and it is possible to find an EAP with an efficacy or safety endpoint; or an EAP managed as a clinical trial; or an EAP classified in Clinical Trials Registries as a phase II, III or IV clinical trial.The internationalisation of the studies

  12. Friction Material Composites Materials Perspective

    CERN Document Server

    Sundarkrishnaa, K L

    2012-01-01

    Friction Material Composites is the first of the five volumes which strongly educates and updates engineers and other professionals in braking industries, research and test labs. It explains besides the formulation of design processes and its complete manufacturing input. This book gives an idea of mechanisms of friction and how to control them by designing .The book is  useful for designers  of automotive, rail and aero industries for designing the brake systems effectively with the integration of friction material composite design which is critical. It clearly  emphasizes the driving  safety and how serious designers should  select the design input. The significance of friction material component like brake pad or a liner as an integral part of the brake system of vehicles is explained. AFM pictures at nanolevel illustrate broadly the explanations given.

  13. 24 CFR 3280.812 - Wiring of expandable units and dual units.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Wiring of expandable units and dual units. 3280.812 Section 3280.812 Housing and Urban Development Regulations Relating to Housing and Urban... § 3280.812 Wiring of expandable units and dual units. (a) Expandable or multiple unit manufactured homes...

  14. Selection of nanoparticles using CO.sub.2-expanded liquids

    Science.gov (United States)

    Roberts, Christopher B; McLeod, Marshall Chandler; Anand, Madhu

    2013-02-19

    A method for size selection of nanostructures comprising utilizing a gas-expanded liquids (GEL) and controlled pressure to precipitate desired size populations of nanostructures, e.g., monodisperse. The GEL can comprise CO.sub.2 antisolvent and an organic solvent. The method can be carried out in an apparatus comprising a first open vessel configured to allow movement of a liquid/particle solution to specific desired locations within the vessel, a second pressure vessel, a location controller for controlling location of the particles and solution within the first vessel, a inlet for addition of antisolvent to the first vessel, and a device for measuring the amount of antisolvent added. Also disclosed is a method for forming nanoparticle thin films comprising utilizing a GEL containing a substrate, pressurizing the solution to precipitate and deposit nanoparticles onto the substrate, removing the solvent thereby leaving a thin nanoparticle film, removing the solvent and antisolvent, and drying the film.

  15. FDA Expands List of "Do Not Compound" Drug Products.

    Science.gov (United States)

    2017-03-01

    EDITOR'S ABSTRACT On October 3, 2016, the U.S. Food and Drug Administration published in the Federal Register an expanded list of drug products that are not to be used in compounding extemporaneous dosage forms. This list contains numerous analgesic or anti-inflammatory agents and other chemicals sometimes used to manage pain and related symptoms. Because pharmacies are licensed by the states and other jurisdictions (districts, territories) as opposed to the federal government, regulation of extemporaneous compounding is inconsistent across the nation and minimal to nonexistent is some jurisdictions. Clinicians are urged to assure that pharmacies they and their patients use adhere to this list and compound only dosage forms for which there is good evidence of both safety and efficacy.

  16. Durability of Modified Expanded Polystyrene Concrete after Dynamic Cyclic Loading

    Directory of Open Access Journals (Sweden)

    Wenbo Shi

    2016-01-01

    Full Text Available EPS concrete was produced by mixing the expanded polystyrene spheres (EPS and polymer emulsion and thickener to the matrix concrete, and this concrete had good vibration energy absorption characteristics. Based on the experimental data obtained on EPS volume ratio of 0%, 20%, 30%, and 40% by replacing matrix or coarse aggregate, the two design styles had nearly the same compressive strength. By applying frequency of 5 Hz, 50000 or 100000 times, 40 KN, 50 KN, and 60 KN cyclic loading, it is shown that the higher the inclusion size was, the lower the compressive strength of the EPS concrete would be; the larger the applying dynamic cyclic load was, the more obvious the compressive strength changing would be. Meanwhile, the strength of EPS concrete had no evident change after durability test. The results of this research had practical significance on using EPS concrete in some long-term cyclic dynamic load engineering.

  17. Expanded polystyrene (EPS) floats for surveillance of Ochlerotatus japonicus.

    Science.gov (United States)

    Scott, Jamesina J; Crans, Wayne J

    2003-12-01

    Blocks of expanded polystyrene (EPS) were placed in a variety of habitats to investigate their potential as an egg-collection device for container-dwelling Aedes and Ochlerotatus species. Eggs from Ochlerotatus japonicus, Oc. triseriatus, Oc. hendersoni, and Aedes albopictus were collected with EPS floats. The float provides an inexpensive, low-maintenance alternative to the Centers for Disease Control ovitrap for sampling container-dwelling mosquito species that are important vectors of disease. Eggs collected on the floats have many potential applications, including use in routine population surveillance; detection of Oc. japonicus, Ae. albopictus, and other container-dwelling species in new areas; species distribution studies; natural transovarial transmission studies; ovipositional studies; collection of local field populations for insecticide resistance assays; assessment of adulticiding efficacy; and establishment of new laboratory colonies.

  18. Water extraction on Mars for an expanding human colony.

    Science.gov (United States)

    Ralphs, M; Franz, B; Baker, T; Howe, S

    2015-11-01

    In-situ water extraction is necessary for an extended human presence on Mars. This study looks at the water requirements of an expanding human colony on Mars and the general systems needed to supply that water from the martian atmosphere and regolith. The proposed combination of systems in order to supply the necessary water includes a system similar to Honeybee Robotics' Mobile In-Situ Water Extractor (MISWE) that uses convection, a system similar to MISWE but that directs microwave energy down a borehole, a greenhouse or hothouse type system, and a system similar to the Mars Atmospheric Resource Recovery System (MARRS). It is demonstrated that a large water extraction system that can take advantage of large deposits of water ice at site specific locations is necessary to keep up with the demands of a growing colony. Copyright © 2015 The Committee on Space Research (COSPAR). Published by Elsevier Ltd. All rights reserved.

  19. Study of reinforcement corrosion in expanded clay concrete

    Directory of Open Access Journals (Sweden)

    A.V. Uglyanitsa

    2015-12-01

    The results of the studies conducted are the recommended design and technological measures for the reinforcement protection against corrosion in various fine aggregate-based (natural sand, ash and dry hydroremoval light-weight expanded clay concrete. Thus, the minimum concrete protective cover for main and distribution reinforcement of external walls must be at least 25 mm. It is necessary to inject additives – reinforcement corrosion inhibitors (sodium nitrite, sodium tetraborate to the concrete composition. The consumption of cement, and hence, the cement paste content of concrete mixture must be not lower than 220 kg/m3, and under the application of the active dry fly ash removal −200 kg/m3.

  20. Alternative approaches to expanding pediatric urology services and productivity.

    Science.gov (United States)

    Canon, Stephen; Basham, Kyle; Canon, Honor Lee; Purifoy, Jody Ann; Swearingen, Christopher

    2012-10-01

    We critically assessed the outcomes of a new model of pediatric urology delivery using alternative approaches to expand care without increasing the number of pediatric urologists. The approaches included the use of advanced practice nurse practitioners, pediatric physician specialists, part-time contract pediatric urologists from neighboring institutions and part-time contract adult urologists from our university. Data were collected from the Division of Pediatric Urology at Arkansas Children's Hospital during 2009 and 2010. The only pediatric urologist at our institution retired in December 2009 with an immediate transition to a new pediatric urologist in January 2010. Comparisons were made in the numbers of clinic visits, inpatient admissions/consultations, surgical volume and patient satisfaction scores. Average clinic monthly visits in 2009 and 2010 were 153 and 271, respectively (p productivity and maximize the quality of delivery of these services. Copyright © 2012 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  1. Mode-locked laser autocollimator with an expanded measurement range.

    Science.gov (United States)

    Chen, Yuan-Liu; Shimizu, Yuki; Kudo, Yukitoshi; Ito, So; Gao, Wei

    2016-07-11

    A mode-locked laser is employed as the light source of a laser autocollimator, instead of the conventionally employed single-wavelength laser, for an expanded range of tilt angle measurement. A group of the spatially separated diffracted beams from a diffraction grating are focused by a collimator objective to form an array of light spots on the focal plane of the collimator objective where a light position-sensing photodiode is located for detecting the linear displacement of the light spot array corresponding to the tilt angle of the reflector. A prototype mode-locked femtosecond laser autocollimator is designed and constructed for achieving a measurement range of 11000 arc-seconds.

  2. Time, space, and disorder in the expanding proteome universe.

    Science.gov (United States)

    Minde, David-Paul; Dunker, A Keith; Lilley, Kathryn S

    2017-04-01

    Proteins are highly dynamic entities. Their myriad functions require specific structures, but proteins' dynamic nature ranges all the way from the local mobility of their amino acid constituents to mobility within and well beyond single cells. A truly comprehensive view of the dynamic structural proteome includes: (i) alternative sequences, (ii) alternative conformations, (iii) alternative interactions with a range of biomolecules, (iv) cellular localizations, (v) alternative behaviors in different cell types. While these aspects have traditionally been explored one protein at a time, we highlight recently emerging global approaches that accelerate comprehensive insights into these facets of the dynamic nature of protein structure. Computational tools that integrate and expand on multiple orthogonal data types promise to enable the transition from a disjointed list of static snapshots to a structurally explicit understanding of the dynamics of cellular mechanisms. © 2017 The Authors. Proteomics Published by Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Support for an expanded tripartite influence model with gay men.

    Science.gov (United States)

    Tylka, Tracy L; Andorka, Michael J

    2012-01-01

    This study investigated whether an expanded tripartite influence model would represent gay men's experiences. This model was extended by adding partners and gay community involvement as sources of social influence and considering dual body image pathways (muscularity and body fat dissatisfaction) to muscularity enhancement and disordered eating behaviors. Latent variable structural equation modeling analyses upheld this model for 346 gay men. Dual body image pathways to body change behaviors were supported, although three unanticipated interrelationships emerged, suggesting that muscularity and body fat concerns and behaviors may be more integrated for gay men. Internalization of the mesomorphic ideal, appearance comparison, muscularity dissatisfaction, and body fat dissatisfaction were key mediators in the model. Of the sources of social influence, friend and media pressure to be lean, gay community involvement, and partner, friend, media, and family pressures to be muscular made incremental contributions. Unexpectedly, certain sources were directly connected to body change behaviors. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Expanded cardiac rehabilitation in socially vulnerable patients with myocardial infarction

    DEFF Research Database (Denmark)

    Hald, Kathrine; Nielsen, Kirsten Melgaard; Nielsen, Claus Vinther

    2018-01-01

    OBJECTIVE: Cardiac rehabilitation (CR) has been shown to reduce cardiovascular risk. A research project performed at a university hospital in Denmark offered an expanded CR intervention to socially vulnerable patients. One-year follow-up showed significant improvements concerning medicine...... compliance, lipid profile, blood pressure and body mass index when compared with socially vulnerable patients receiving standard CR. The aim of the study was to perform a long-term follow-up on the socially differentiated CR intervention and examine the impact of the intervention on all-cause mortality......, cardiovascular mortality, non-fatal recurrent events and major cardiac events (MACE) 10 years after. DESIGN: Prospective cohort study. SETTING: The cardiac ward at a university hospital in Denmark from 2000 to 2004. PARTICIPANTS: 379 patients aged

  5. Expanding Medicare and employer plans to achieve universal health insurance.

    Science.gov (United States)

    Davis, K

    1991-05-15

    This article presents a proposal for expanding Medicare and employer-based health insurance plans to achieve universal health insurance. Under this proposed health care financing system, employees would provide basic health insurance coverage to workers and dependents, or pay a payroll tax contribution toward the cost of their coverage under Medicare. States would have the option of buying all Medicaid beneficiaries and other poor individuals into Medicare by paying the Medicare premiums and cost sharing. Other uninsured individuals would be automatically covered by Medicare. Employer plans would incorporate Medicare's provider payment methods. This proposal would result in incremental federal governmental outlays on the order of $25 billion annually. These new federal budgetary costs would be met through a combination of premiums, employer payroll tax, income tax, and general tax revenues. The principal advantage of this plan is that it draws on the strengths of the current system while simplifying the benefit and provider payment structure and instituting innovations to promote efficiency.

  6. Expanding the Possibilities of AIS Data with Heuristics

    Directory of Open Access Journals (Sweden)

    Bjørnar Brende Smestad

    2017-06-01

    Full Text Available Automatic Identification System (AIS is primarily used as a tracking system for ships, but with the launch of satellites to collect these data, new and previously untested possibilities are emerging. This paper presents the development of heuristics for establishing the specific ship type using information retrieved from AIS data alone. These heuristics expand the possibilities of AIS data, as the specific ship type is vital for several transportation research cases, such as emission analyses of ship traffic and studies on slow steaming. The presented method for developing heuristics can be used for a wider range of vessels. These heuristics may form the basis of large-scale studies on ship traffic using AIS data when it is not feasible or desirable to use commercial ship data registers.

  7. Molecular phylogeny of Polyneoptera (Insecta) inferred from expanded mitogenomic data

    Science.gov (United States)

    Song, Nan; Li, Hu; Song, Fan; Cai, Wanzhi

    2016-01-01

    The Polyneoptera represents one of the earliest insect radiations, comprising the majority of hemimetabolous orders, in which many species have great economic importance. Here, we sequenced eleven mitochondrial genomes of the polyneopteran insects by using high throughput pooled sequencing technology, and presented a phylogenetic reconstruction for this group based on expanded mitochondrial genome data. Our analyses included 189 taxa, of which 139 species represent all the major polyneopteran lineages. Multiple results support the monophyly of Polyneoptera, the monophyly of Dictyoptera, and the monophyly of Orthoptera. Sister taxon relationships Plecoptera + Dermaptera, and Zoraptera + Embioptera are also supported by most analyses. Within Dictyoptera, the Blattodea is consistently retrieved as paraphyly due to the sister group relationship of Cryptocercus with Isoptera. In addition, the results demonstrate that model selection, data treatment, and outgroup choice can have significant effects on the reconstructed phylogenetic relationships of Polyneoptera. PMID:27782189

  8. Metagenome of a versatile chemolithoautotroph from expanding oceanic dead zones.

    Science.gov (United States)

    Walsh, David A; Zaikova, Elena; Howes, Charles G; Song, Young C; Wright, Jody J; Tringe, Susannah G; Tortell, Philippe D; Hallam, Steven J

    2009-10-23

    Oxygen minimum zones, also known as oceanic "dead zones," are widespread oceanographic features currently expanding because of global warming. Although inhospitable to metazoan life, they support a cryptic microbiota whose metabolic activities affect nutrient and trace gas cycling within the global ocean. Here, we report metagenomic analyses of a ubiquitous and abundant but uncultivated oxygen minimum zone microbe (SUP05) related to chemoautotrophic gill symbionts of deep-sea clams and mussels. The SUP05 metagenome harbors a versatile repertoire of genes mediating autotrophic carbon assimilation, sulfur oxidation, and nitrate respiration responsive to a wide range of water-column redox states. Our analysis provides a genomic foundation for understanding the ecological and biogeochemical role of pelagic SUP05 in oxygen-deficient oceanic waters and its potential sensitivity to environmental changes.

  9. Metagenome of a Versatile Chemolithoautotroph from Expanding Oceanic Dead Zones

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, David A.; Zaikova, Elena; Howes, Charles L.; Song, Young; Wright, Jody; Tringe, Susannah G.; Tortell, Philippe D.; Hallam, Steven J.

    2009-07-15

    Oxygen minimum zones (OMZs), also known as oceanic"dead zones", are widespread oceanographic features currently expanding due to global warming and coastal eutrophication. Although inhospitable to metazoan life, OMZs support a thriving but cryptic microbiota whose combined metabolic activity is intimately connected to nutrient and trace gas cycling within the global ocean. Here we report time-resolved metagenomic analyses of a ubiquitous and abundant but uncultivated OMZ microbe (SUP05) closely related to chemoautotrophic gill symbionts of deep-sea clams and mussels. The SUP05 metagenome harbors a versatile repertoire of genes mediating autotrophic carbon assimilation, sulfur-oxidation and nitrate respiration responsive to a wide range of water column redox states. Thus, SUP05 plays integral roles in shaping nutrient and energy flow within oxygen-deficient oceanic waters via carbon sequestration, sulfide detoxification and biological nitrogen loss with important implications for marine productivity and atmospheric greenhouse control.

  10. Battery energy storage market feasibility study -- Expanded report

    Energy Technology Data Exchange (ETDEWEB)

    Kraft, S. [Frost and Sullivan, Mountain View, CA (United States); Akhil, A. [Sandia National Labs., Albuquerque, NM (United States). Energy Storage Systems Analysis and Development Dept.

    1997-09-01

    Under the sponsorship of the US Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  11. Disease mongering: expanding the boundaries of treatable disease.

    Science.gov (United States)

    Doran, E; Henry, D

    2008-11-01

    Traditionally, the promotional activities of medical industries have been product specific. In recent years, however, there have been examples where companies have worked through partnerships, which have included clinicians, to expand the boundaries of treatable disorders. The main motivation appears to be to increase sales of commercial products. The term 'disease mongering' has been applied to these activities. Whereas some disease awareness programmes may bring benefits in the form of improved recognition and management of disorders, the presence of strong commercial interests probably distorts the traditional processes by which treatable diseases have been defined. This can result in individual patients being exposed to potential harms, with little expectation of benefit and will place an unwarranted burden on the publicly funded health-care system. None of this can happen without the collaboration of the medical profession that needs to be aware of the risks of becoming involved in commercially supported 'consensus' groups that are reviewing the definition and management of diseases.

  12. Expanding entrepreneurship opportunities through local governance: the case of Barbados

    Directory of Open Access Journals (Sweden)

    Paul Pounder

    2015-06-01

    Full Text Available This paper looks at the government and local governance structures of Barbados, arguing that local governance should be leveraged to expand entrepreneurship opportunities at the community level. It examines the links between local governance and entrepreneurship, and proposes a framework aimed at strengthening the relationship between Barbados’ newly formed constituency councils and its government institutions supporting entrepreneurship. The research concludes that there are many inefficiencies in the interaction between government agencies and constituency councils, which the proposed framework is a first step toward remedying.  The research suggests that local governance is a complex issue worldwide. More specifically in Barbados, even though the role of the constituency councils is defined, there are weak formal arrangements which undermine the processes and activities to support community entrepreneurship. The proposed framework highlighted in the research is a first step in formalising a way forward for entrepreneurship in the community. 

  13. The expanded Lagrangian system for constrained optimization problems

    Science.gov (United States)

    Poore, A. B.; Al-Hassan, Q.

    1988-01-01

    Smooth penalty functions can be combined with numerical continuation/bifurcation techniques to produce a class of robust and fast algorithms for constrained optimization problems. The key to the development of these algorithms is the Expanded Lagrangian System which is derived and analyzed in this work. This parameterized system of nonlinear equations contains the penalty path as a solution, provides a smooth homotopy into the first-order necessary conditions, and yields a global optimization technique. Furthermore, the inevitable ill-conditioning present in a sequential optimization algorithm is removed for three penalty methods: the quadratic penalty function for equality constraints, and the logarithmic barrier function (an interior method) and the quadratic loss function (an interior method) for inequality constraints. Although these techniques apply to optimization in general and to linear and nonlinear programming, calculus of variations, optimal control and parameter identification in particular, the development is primarily within the context of nonlinear programming.

  14. Geometrical aspects of the interaction between expanding clouds and environment

    CERN Document Server

    Spineanu, F

    2015-01-01

    This work is intended to be a contribution to the study of the morphology of the rising convective columns, for a better representation of the processes of entrainment and detrainment. We examine technical methods for the description of the interface of expanding clouds and reveal the role of \\emph{fingering} instability which increases the effective length of the periphery of the cloud. Assuming Laplacian growth we give a detailed derivation of the time-dependent conformal transformation that solves the equation of the \\emph{fingering} instability. For the phase of slower expansion, the evolution of complex poles with a dynamics largely controlled by the Hilbert operator (acting on the function that represents the interface position) leads to \\emph{cusp} singularities but smooths out the smaller scale perturbations. We review the arguments that the rising column cannot preserve its integrity (seen as compacity in any horizontal section), because of the penetrative downdrafts or the incomplete repulsion of th...

  15. Expanding the Lexicon: The Case of Jordanian Arabic

    Directory of Open Access Journals (Sweden)

    Zainab Sa'aida

    2016-12-01

    Full Text Available The aim of this study is to explore (nonmorphological processes that native speakers of Jordanian Urban Arabic and Jordanian Rural Arabic use to expand their own lexicon. Three Jordanian female respondents were interviewed to collect data. The data consist of transcriptions of recorded tokens, which were categorised into groups according to the (nonmorphological processes that they undergo. Findings of the study show that there is a number of (nonmorphological processes that native speakers of Jordanian Urban Arabic and Jordanian Rural Arabic use to enlarge their own lexicon. The morphological processes include affixation, suppletion, conversion, and vowel mark placement. The present study has also explored a number of non-morphological processes which include univerbation, borrowing, and word creation. Keywords: Lexicon, Jordanian Arabic, (nonmorphological processes, (nonconcatenative, word-formation

  16. Gemini Observatory Takes its Local Communities on an Expanding Journey

    Science.gov (United States)

    Harvey, Janice; Michaud, Peter

    2012-08-01

    Currently in its 7th year (2011) Hawaii's annual Journey through the Universe (JttU) program is a flagship Gemini Observatory public education/outreach initiative involving a broad cross-section of the local Hawai'i Island astronomical community, the public, educators, businesses, local government officials, and thousands of local students. This paper describes the program, its history, planning, implementation, as well as the program's objectives and philosophy. The success of this program is documented here, as measured by continuous and expanding engagement of educators, the community, and the public, along with formal evaluation feedback and selected informal verbal testimony. The program's success also serves as justification for the planned adaptation of a version of the program in Chile in 2011 (adapted for Chilean educational and cultural differences). Finally, lessons learned are shared which have refined the program for Gemini's host communities but can also apply to any institution wishing to initiate a similar program.

  17. Resistance evaluation expanded perlite the leaching acid: variation of parameters concentration, time and leaching agent; Avaliacao da resistencia da perlita expandida a lixiviacao acida: variacao dos parametros concentracao, tempo e agente lixiviante

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, J.M.F. de; Damasceno Junior, E.; Oliveira, E.S.; Fernandes, N.S., E-mail: janielequimicaufrn@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Instituto de Quimica. Laboratorio de Quimica Analitica e Meio Ambiente

    2016-07-01

    The expanded perlite is an amorphous aluminosilicate which presents in its composition about 75.0% silicon oxide (SiO2), also having other species in the composition as oxides of some metals. Silicas and silicates have been used in the environmental field, in relevant anti-corrosive activity. In this context, materials that exposes too many highly acidic media, require preservation against this type of wear, as this type of damage causes a great financial loss, thereby requiring low-cost, abundant materials, non-toxic and easy to purchase as some silica coating. The study evaluated the perlite expanded resistance against an acid leaching process. With undeniability the use of strong acids and different working conditions were not able to remove the oxides present on the expanded perlite sample, thus demonstrating the high strength of the expanded perlite against acid attacks. (author)

  18. A semi-synthetic organism with an expanded genetic alphabet.

    Science.gov (United States)

    Malyshev, Denis A; Dhami, Kirandeep; Lavergne, Thomas; Chen, Tingjian; Dai, Nan; Foster, Jeremy M; Corrêa, Ivan R; Romesberg, Floyd E

    2014-05-15

    Organisms are defined by the information encoded in their genomes, and since the origin of life this information has been encoded using a two-base-pair genetic alphabet (A-T and G-C). In vitro, the alphabet has been expanded to include several unnatural base pairs (UBPs). We have developed a class of UBPs formed between nucleotides bearing hydrophobic nucleobases, exemplified by the pair formed between d5SICS and dNaM (d5SICS-dNaM), which is efficiently PCR-amplified and transcribed in vitro, and whose unique mechanism of replication has been characterized. However, expansion of an organism's genetic alphabet presents new and unprecedented challenges: the unnatural nucleoside triphosphates must be available inside the cell; endogenous polymerases must be able to use the unnatural triphosphates to faithfully replicate DNA containing the UBP within the complex cellular milieu; and finally, the UBP must be stable in the presence of pathways that maintain the integrity of DNA. Here we show that an exogenously expressed algal nucleotide triphosphate transporter efficiently imports the triphosphates of both d5SICS and dNaM (d5SICSTP and dNaMTP) into Escherichia coli, and that the endogenous replication machinery uses them to accurately replicate a plasmid containing d5SICS-dNaM. Neither the presence of the unnatural triphosphates nor the replication of the UBP introduces a notable growth burden. Lastly, we find that the UBP is not efficiently excised by DNA repair pathways. Thus, the resulting bacterium is the first organism to propagate stably an expanded genetic alphabet.

  19. Immediate breast reconstruction with expander in pregnant breast cancer patients.

    Science.gov (United States)

    Lohsiriwat, Visnu; Peccatori, Fedro Alessandro; Martella, Stefano; Azim, Hatem A; Sarno, Maria Anna; Galimberti, Viviana; De Lorenzi, Francesca; Intra, Mattia; Sangalli, Claudia; Rotmensz, Nicole; Pruneri, Giancarlo; Renne, Giuseppe; Schorr, Mario Casales; Nevola Teixeira, Luiz Felipe; Rietjens, Mario; Giroda, Massimo; Gentilini, Oreste

    2013-10-01

    Breast reconstruction after mastectomy is currently considered an essential component in managing breast cancer patients, particularly those diagnosed at a young age. However, no studies have been published on the feasibility of immediate breast reconstruction in patients diagnosed and operated during the course of gestation. We retrospectively identified all breast cancer patients who were subjected to mastectomy and immediate breast reconstruction during pregnancy at the European Institute of Oncology between 2002 and 2012. Patient demographics, gestational age at surgery, tumor stage, adjuvant treatment, details of the surgical procedures, surgical outcomes and fetal outcomes were analyzed. A total of 78 patients with breast cancer diagnosed during pregnancy were subjected to a surgical procedure during the course of gestation. Twenty-two patients had mastectomy; of whom 13 were subjected to immediate breast reconstruction. Twelve out of 13 patients had a two-stage procedure with tissue expander insertion. Median gestational age at surgery was 16 weeks. No major surgical complications were encountered. Only one patient elected to have an abortion, otherwise, no spontaneous abortions or pregnancy complications were reported. Median gestational age at delivery was 35 weeks (range: 32-40 weeks). No major congenital malformations were reported. At a median follow-up of 32 months, all patients are alive with no long-term surgical complications. This is the first study of immediate breast reconstruction in pregnant breast cancer patients. Tissue expander insertion appears to ensure a short operative time, and does not seem to be associated with considerable morbidity to the patient or the fetus. Hence, it could be considered in the multidisciplinary management of women diagnosed with breast cancer during pregnancy. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Expanding the Universe of "Astronomy on Tap" Public Outreach Events

    Science.gov (United States)

    Rice, Emily L.; Levine, Brian; Livermore, Rachael C.; Silverman, Jeffrey M.; LaMassa, Stephanie M.; Tyndall, Amy; Muna, Demitri; Garofali, Kristen; Morris, Brett; Byler, Nell; Fyhrie, Adalyn; Rehnberg, Morgan; Hart, Quyen N.; Connelly, Jennifer L.; Silvia, Devin W.; Morrison, Sarah J.; Agarwal, Bhaskar; Tremblay, Grant; Schwamb, Megan E.

    2016-01-01

    Astronomy on Tap (AoT, astronomyontap.org) is free public outreach event featuring engaging science presentations in bars, often combined with music, games, and prizes, to encourage a fun, interactive atmosphere. AoT events feature several short astronomy-related presentations primarily by local professional scientists, but also by visiting scientists, students, educators, amatuer astronomers, writers, and artists. Events are held in social venues (bars, coffee shops, art galleries, etc.) in order to bring science directly to the public in a relaxed, informal atmosphere. With this we hope to engage a more diverse audience than typical lectures at academic and cultural institutions and to develop enthusiasm for science among voting, tax-paying adults. The flexible format and content of an AoT event is easy to adapt and expand based on the priorities, resources, and interests of local organizers. The social nature of AoT events provides important professional development and networking opportunities in science communication. Since the first New York City event in April 2013, Astronomy on Tap has expanded to more than ten cities globally, including monthly events in NYC, Austin, Seattle, and Tucson; semi-regular events in Columbus, New Haven, Santiago, Toronto, and Denver; occasional (so far) events in Rochester (NY), Baltimore, Lansing, and Washington, DC; and one-off events in Chicago and Taipei. Several venues regularly attract audiences of over 200 people. We have received media coverage online, in print, and occasionally even on radio and television. In this poster we describe the overarching goals and characteristics of AoT events, distinct adaptations of various locations, resources we have developed, and the methods we use to coordinate among the worldwide local organizers.