WorldWideScience

Sample records for exotiques tres deformes

  1. {gamma}-spectroscopy and radioactive beams: search for highly deformed exotic nuclei; Detection {gamma} et faisceaux radioactifs: recherche de noyaux exotiques tres deformes

    Energy Technology Data Exchange (ETDEWEB)

    Rosse, B

    2006-07-15

    This work is devoted to the search for highly deformed nuclei under extreme conditions of isospin, located near the proton drip-line, around A {approx} 130. The experiment was performed at GANIL (Caen) with the SPIRAL radioactive beam facility. The nuclei of interest were produced by fusion-evaporation reactions induced by the neutron deficient Kr{sup 76} radioactive beam (T1/2 = 14.8 h). {gamma}-rays were detected by the EXOGAM array, composed of 11 segmented germanium clover detectors, for which a new segment calibration method has been developed. To extract fusion-evaporation events of a overwhelming background due to the radioactivity of the beam, the EXOGAM array was coupled with the light charged particle detector DIAMANT and the high acceptance VAMOS spectrometer. The latter was used for the first time to detect fusion-evaporation residues. The detailed data analysis allowed us to demonstrate that the EXOGAM + DIAMANT + VAMOS coupling is operational and essential to investigate the structure of these nuclei. Furthermore, the first {gamma} transition was observed in the very exotic odd-odd Pm{sup 130} nucleus. The results have been interpreted with static and dynamic self-consistent microscopic calculations in collaboration with the Theoretical Physicists of the IPN Lyon. (author)

  2. Enjeux de la gestion des espèces exotiques envahissantes dans les milieux d'eau douce en outre-mer

    Directory of Open Access Journals (Sweden)

    SOUBEYRAN, Yohann

    2012-02-01

    Full Text Available Les milieux aquatiques d’eau douce en outre-mer ne sont pas épargnés par les espèces exotiques envahissantes. Ces espèces ont des impacts négatifs, avérés ou potentiels, importants. Diverses actions sont mises en œuvre tant sur le plan national que local pour mieux les gérer, mais de nombreux défis restent encore à relever.

  3. Recon Spectroscopy with TRES

    Science.gov (United States)

    Latham, David W.; TRES Team

    2018-01-01

    The Tillinghast Reflector Echelle Spectrograph (TRES) on the 1.5-m Tillinghast Reflector at the Fred L. Whipple Observatory on Mount Hopkins has been a workhorse for reconnaissance spectroscopy of transiting-planet candidates identified by a variety of ground- and space-based photometric surveys, including Vulcan, TrES, HATNet, KELT, QES, Kepler, and K2. In support of NASA missions, quick-look classifications of effective temperature, surface gravity, metallicity, line broadening due to rotation, and absolute radial velocity have been uploaded to ExoFOP at NExScI on a timely schedule. More careful results derived using the Stellar Parameter Classification (SPC) tool can be provided in support of publications. For example, SPC results for effective temperature and metallicity have been used extensively to help constrain asteroseismic analyses of Kepler and K2 targets. TRES has also been used effectively for orbital solutions, Rossiter-McLaughlin observations, and Doppler tomography of large planets orbiting brighter. We look forward to continuing this work on TESS Objects of Interest.

  4. Aislamiento de tres cepas de leishmania

    Directory of Open Access Journals (Sweden)

    Florentino Rey

    1942-08-01

    Full Text Available Con el ánimo de estudiar el problema parasitológico de la Leishmaniasis cutánea en Colombia, emprendimos algunas experiencias al respecto. Este es un estudio de aislamiento de tres cepas de Leishmania obtenidas de tres enfermos de distintas regiones del país, Investigadores colombianos que se han ocupado con anterioridad de este problema, obtuvieron siempre resultados negativos. Comunicaciones posteriores informarán sobre estudios experimentales de las cepas mencionadas.

  5. 2013 Tres Lagunas Post Fire, 12

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  6. 2013 Tres Lagunas Post Fire, 5

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  7. 2013 Tres Lagunas Post Fire, 30

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  8. 2013 Tres Lagunas Post Fire, 14

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  9. 2013 Tres Lagunas Post Fire, 26

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  10. 2013 Tres Lagunas Post Fire, 3

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  11. 2013 Tres Lagunas Post Fire, 33

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  12. 2013 Tres Lagunas Post Fire, 8

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  13. 2013 Tres Lagunas Post Fire, 18

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  14. 2013 Tres Lagunas Post Fire, 11

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  15. 2013 Tres Lagunas Post Fire, 17

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  16. 2013 Tres Lagunas Post Fire, 27

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  17. 2013 Tres Lagunas Post Fire, 6

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  18. 2013 Tres Lagunas Post Fire, 24

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  19. 2013 Tres Lagunas Post Fire, 4

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  20. 2013 Tres Lagunas Post Fire, 21

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  1. 2013 Tres Lagunas Post Fire, 7

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  2. 2013 Tres Lagunas Post Fire, 32

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  3. 2013 Tres Lagunas Post Fire, 1

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  4. 2013 Tres Lagunas Post Fire, 28

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  5. 2013 Tres Lagunas Post Fire, 9

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  6. 2013 Tres Lagunas Post Fire, 35

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  7. 2013 Tres Lagunas Post Fire, 31

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  8. 2013 Tres Lagunas Post Fire, 34

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — USDA USFS Southwestern Region Contract # AG-8371-C-10-0011 Delivery # AG-8371-D-13-0056 DIGITAL PHOTOGRAPHY ACQUISITION, TRES LAGUNAS FIRE, NEW MEXICO Project...

  9. Prototecosis Informe de tres casos

    Directory of Open Access Journals (Sweden)

    Miguel Guzmán

    1983-12-01

    Full Text Available Se presentan tres casos clínicos de prototecosis vistos y estudiados en el lnstituto Nacional de Salud. Uno corresponde a la forma tegumentaria y los otros dos a formas de bursitis del olécranon. Se discuten los aspectos biológicos, clínicos y de laboratorio de esta rara entidad causada por algas.

  10. TREsPASS Book 3: Creative Engagements

    NARCIS (Netherlands)

    Coles-Kemp, Lizzie; Hall, Peter

    2016-01-01

    In this book we examine the role that creative security engagements have played in the TREsPASS project. These engagements are part of a wider creative securities approach that explores the contributions that social practices make to protection of data and information. Our most popular creative

  11. Tres caixes plenes d'art: Tàpies, Miró i Picasso

    Directory of Open Access Journals (Sweden)

    Lourdes Martín-Herrero

    2009-10-01

    Full Text Available Tres caixes plenes d’art és el resultat d’un projecte dut a terme durant cinc mesos del curs escolar 2008/2009, gràcies a l’adjudicació d’una llicència d’estudis retribuïda pel Departament d’Educació de la Generalitat de Catalunya. El punt de partida en les tres caixes és l’art a l’escola, en concret en el parvulari. L’art com a epicentre del qual es teixeix una xarxa amb tots els aspectes del currículum, que conformen la globalitat dels nens i nenes com a persones. Així, a grans trets, podríem dir que, amb el conjunt del treball dels tres artistes esmentats i el dels tres eixos temàtics triats (les textures i els materials de l’entorn, els símbols i els colors, els sentiments i les emocions, al llarg del cicle d’educació infantil, aprofundim en la descoberta de l’entorn, en la comunicació i llenguatges i en la descoberta d’un mateix i dels altres.

  12. Lectura crítica: tres experiencias venezolanas

    Directory of Open Access Journals (Sweden)

    Adolfo Herrera E.

    2015-01-01

    Full Text Available Las tres experiencias seleccionadas tienen que ver con la difusión de mensajes, lo que las introduce en un mecanismo de amplio espectro informativo, y esto podría llamarse el ingrediente popular.

  13. Geophysical exploration with transient electromagnetic soundings in three geothermal zones of Baja California, Mexico: Tres Virgenes, Puertecitos and Bahia Concepcion; Exploracion geofisica con sondeos electromagneticos transitorios en tres zonas geotermicas de Baja California, Mexico: Tres Virgenes, Puertecitos y Bahia Concepcion

    Energy Technology Data Exchange (ETDEWEB)

    Flores, Carlos; Vazquez, Rogelio; Gonzalez, Carlos A; Romo, Jose M; Velasco, Nector; Lopez, Addier [CICESE, Ensenada, B.C. (Mexico)

    1999-04-01

    The results obtained from transient electromagnetic soundings (TDEM) applied to three geothermal zones are briefly commented, emphasizing instead the out of contract work done by the Centro de Investigacion Cientifica y de Educacion Superior de Ensenada (CICESE), both in the application of other geophysical techniques and the subsequent data analysis. This work includes several VLF (very low frequency) electromagnetic profiles in Bahia Concepcion and a magnetotelluric profile in Puertecitos. Regarding the data analysis, an algorithm to assess stratified models was constructed and applied to several Bahia Concepcion soundings and to the TDEM and Schlumberger data from Tres Virgenes in order to compare the resolving powers of these methods. Finally an imaging procedure based on smoothness constraints is being applied nowadays to characterize the geometry of the electric conductors under the Tres Virgenes hot springs. [Spanish] Se comentan los resultados de la aplicacion del modo de sondeo electromagnetico transitorio (TDEM) en tres zonas geotermicas, dando enfasis al trabajo realizado fuera de contrato por el Centro de Investigacion Cientifica y de Educacion Superior de Ensenada (CICESE), tanto en la aplicacion de otras tecnicas geofisicas como en el analisis posterior de los datos. Estos trabajos comprenden el levantamiento de perfiles electromagneticos con el metodo VLF (very low frequency) en Bahia Concepcion y de un perfil magnetotelurico en Puertecitos. En relacion con analisis de los datos, se implemento un algoritmo de evaluacion de modelos estratificados, usandose en sondeos de Bahia Concepcion. Esta tecnica se aplico a los datos TDEM y Schlumberger de Tres Virgenes para comparar sus poderes de resolucion. Finalmente, un procedimiento de construccion de imagenes de resistividad, basado en condiciones de suavidad, se esta aplicando actualmente a los datos de Tres Virgenes para caracterizar la geometria de los conductores electricos bajo las manifestaciones

  14. Acerca de tres dimensiones del ser humano

    OpenAIRE

    Fúnez, Rubén

    2007-01-01

    El autor resume las ideas importantes del libro "Tres dimensiones del ser humano", se pregunta por la importancia del planteamiento zubiriano, tanto para la historia de la filosofía, como para la situación que actualmente nos ha tocado vivir.

  15. ¿RE/POSICIÓN? DE "TRES MARÍAS Y UNA ROSA": TRES DÉCADAS PARA A/BORDAR LA RESISTENCIA

    Directory of Open Access Journals (Sweden)

    Yael Zaliasnik

    2010-11-01

    Full Text Available Este trabajo busca indagar en las condiciones y repercusiones de volver a poner en escena una obra emblemática del teatro de los años de dictadura en Chile, “Tres Marías y una Rosa”, tres décadas después y sin ninguna modificación significativa. En palabras de Raymond Williams, ¿qué es lo residual, lo dominante, lo emergente? ¿Qué se gana/pierde con esta reposición? ¿Cómo se percibe (se “lee”? ¿Existen imágenes sociales residuales de la dictadura? ¿Qué representaba la obra hace 30 años; ha cambiado esto hoy? Ineluctablemente, estas interrogantes nos llevan al tema de las arpilleras y las arpilleristas, a nuestro entender, central en la obra, pero que es evadido y olvidado como movimiento de resistencia, al no profundizarse en él en este nuevo montaje.The present work explores the conditions and repercussions of staging anew an emblematic play of the dictatorship era in Chile: “Tres Marías y una Rosa,” three decades after that period, and without significant modifications. In the words of Raymond Williams, what’s the residual, the dominant, the emergent? What is won/lost in this re-staging? How is it perceived (“read”? Are there still residual social images from the dictatorship? What did the play represent 30 years ago, and has that changed today? Inevitably, these questions lead us to the issue of the Chilean textile craft of the “arpilleras” and the women artisans who made these (“arpilleristas”, to our understanding, central to the play, but avoided and forgotten as a resistance movement, as it is not treated in depth in its current staging.

  16. Imágenes en tres dimensiones

    Directory of Open Access Journals (Sweden)

    Dr. Manuel Carlos Fernández Sánchez

    2000-01-01

    Full Text Available Después de realizar un breve estudio sobre la tridimensionalidad en el arte desde las pinturas rupestres hasta la actualidad, nos internamos en la investigación sobre los aspectos biológicos y psicológicos de la visión en tres dimensiones, para centrarnos finalmente en las tradicionales y nuevas tecnologías que aplican la visión estereoscópica como son el cine en relieve, la realidad virtual o la holografía.

  17. Photometric investigation of hot exoplanets: TrES-3b and Qatar-1b

    Science.gov (United States)

    Püsküllü, Ç.; Soydugan, F.; Erdem, A.; Budding, E.

    2017-08-01

    New photometric follow-up observations of transitting 'hot Jupiters' TrES-3b and Qatar-1b are presented. Weighted mean values of the solutions of light curves in R-filter for both planetary systems are reported and compared with the previous results. The transit light curves were analysed using the WINFITTER code. The physical properties of the planets were estimated. The planet radii are found to be Rp = 1.381 ± 0.033RJ for TrES-3b and Rp = 1.142 ± 0.025RJ for Qatar-1b. Transit times and their uncertainties were also determined and a new linear ephemeris was computed for both systems. Analysis of transit times showed that a significant signal could not be determined for TrES-3b, while weak evidence was found for Qatar-1b, which might be tested using more precise future transit times.

  18. Tres obras del equipo de arquitectos Hellmuth, Obata & Kassabaum/EE.UU.

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1982-02-01

    Full Text Available Not available.En este artículo se describen tres obras recientes del equipo de arquitectos Hellmuth, Obata y Kassabaum. La primera corresponde al Centro Cívico Decatur que, en un único edificio, organiza tres funciones totalmente distintas: una pista de patinaje sobre hielo, un teatro y el Ayuntamiento de la ciudad. La segunda, la Biblioteca de la Universidad de Western, Illinois, consta de cuatro pabellones de cinco alturas desarrollados en torno a un amplio espacio central de comunicaciones y servicios. La última trata de la ampliación, mediante dos nuevos edificios, de un antiguo hospital y su adaptación a las nuevas funciones de enseñanza que tenía que satisfacer.

  19. A novel deformation mechanism for superplastic deformation

    Energy Technology Data Exchange (ETDEWEB)

    Muto, H.; Sakai, M. (Toyohashi Univ. of Technology (Japan). Dept. of Materials Science)

    1999-01-01

    Uniaxial compressive creep tests with strain value up to -0.1 for a [beta]-spodumene glass ceramic are conducted at 1060 C. From the observation of microstructural changes between before and after the creep deformations, it is shown that the grain-boundary sliding takes place via cooperative movement of groups of grains rather than individual grains under the large-scale-deformation. The deformation process and the surface technique used in this work are not only applicable to explain the deformation and flow of two-phase ceramics but also the superplastic deformation. (orig.) 12 refs.

  20. CETIH: Historia contada a tres voces/CETIH: A Story Told by Three People

    Directory of Open Access Journals (Sweden)

    Laura Camacho

    2011-12-01

    Full Text Available Una vez más la Revista de Ingeniería se propone recordar un hito para la ingeniería colombiana que se gestó en la Universidad de los Andes. Pero, esta vez, la historia será contada a tres voces: Carlos Angulo Galvis, Fabio Castrellón y Juan Saldarriaga. Tres nombres que determinaron el origen, transformación y desaparición del Centro de Estudios Técnicos e Investigaciones Hidráulicas, más conocido como CETIH; siglas que aún hacen eco en la memoria de algunos de nuestros lectores.

  1. Tres reformas educativas europeas: Reino Unido, Francia y España: aspectos comparativos.

    Directory of Open Access Journals (Sweden)

    Inmaculada Egido Gálvez

    1997-01-01

    Full Text Available Desde una perspectiva unicamente aproximativa, este trabajo lleva a cabo un breve repaso de las reforrnas realizadas en los ultimos afios en el sistema educativo de tres paises europeos: Reino Unido, Francia y Espana. Tras la consideracion de los principales cambios introducidos por las leyes de reforma en relaci6n con la estructura del sistema, el curriculum, el profesorado y el gobiemo y la administraci6n de la educacion, se presenta lavaloraci6n crftica de algunos de los aspectos mas relevantes de las reformas. Por ultimo, se realizan algunas reflexiones globales derivadas de la comparaci6n entre los tres casos tratados

  2. A two-dimensional deformable phantom for quantitatively verifying deformation algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Kirby, Neil; Chuang, Cynthia; Pouliot, Jean [Department of Radiation Oncology, University of California San Francisco, San Francisco, California 94143-1708 (United States)

    2011-08-15

    Purpose: The incorporation of deformable image registration into the treatment planning process is rapidly advancing. For this reason, the methods used to verify the underlying deformation algorithms must evolve equally fast. This manuscript proposes a two-dimensional deformable phantom, which can objectively verify the accuracy of deformation algorithms, as the next step for improving these techniques. Methods: The phantom represents a single plane of the anatomy for a head and neck patient. Inflation of a balloon catheter inside the phantom simulates tumor growth. CT and camera images of the phantom are acquired before and after its deformation. Nonradiopaque markers reside on the surface of the deformable anatomy and are visible through an acrylic plate, which enables an optical camera to measure their positions; thus, establishing the ground-truth deformation. This measured deformation is directly compared to the predictions of deformation algorithms, using several similarity metrics. The ratio of the number of points with more than a 3 mm deformation error over the number that are deformed by more than 3 mm is used for an error metric to evaluate algorithm accuracy. Results: An optical method of characterizing deformation has been successfully demonstrated. For the tests of this method, the balloon catheter deforms 32 out of the 54 surface markers by more than 3 mm. Different deformation errors result from the different similarity metrics. The most accurate deformation predictions had an error of 75%. Conclusions: The results presented here demonstrate the utility of the phantom for objectively verifying deformation algorithms and determining which is the most accurate. They also indicate that the phantom would benefit from more electron density heterogeneity. The reduction of the deformable anatomy to a two-dimensional system allows for the use of nonradiopaque markers, which do not influence deformation algorithms. This is the fundamental advantage of this

  3. Tres grandes plataformas marinas Mar del Norte

    Directory of Open Access Journals (Sweden)

    Soulas, R.

    1978-03-01

    Full Text Available This article analyzes the different building stages of three large sea platforms. After studying the structure's main characteristics, preparing scale models and calculating ail the elements, platform construction was carried out in three stages: — Dry-dock construction of the hull base. — Installation in the water and finishing the structure. — Immersion and bridge installation. Finally, the necessary operations to move the platform to its definite location were carried out. The structures are formed by a parallelepiped hull of reinforced concrete, divided into compartments by means of vertical orthogonals panels on top of which 2 or 4 piles are placed to support the bridge.

    En este artículo se analizan las diversas etapas en la realización de tres grandes plataformas marinas. Después de un estudio de las características principales de la estructura, ensayos en modelo reducido y cálculo de todos los elementos, se procede a la construcción de las plataformas en tres fases: — Construcción en seco de la base del casco. — Colocación en el agua y acabado de la estructura. — Inmersión y colocación del puente. Por último, se realizan las operaciones necesarias para llevar la plataforma a su ubicación definitiva. Las estructuras están formadas por un casco paralelepipédico de hormigón armado, dividido en compartimientos mediante tabiques verticales ortogonales y sobre el que se han colocado 2 ó 4 pilas que soportan el puente.

  4. años en tres contextos socioeconómicos

    Directory of Open Access Journals (Sweden)

    Eugenio Fuentes-Rodríguez

    2009-01-01

    Full Text Available El proceso de transición demográfica en Costa Rica produjo una reducción de la fecundidad diferencial. Las disparidades pueden ser explicadas por la heterogeneidad sociocultural, espacial y estructural, de la sociedad costarricense. En términos de grupos etarios, el de las mujeres entre 20 y 29 años es el que ha contribuido mayormente a esta reducción. La investigación tuvo como objetivo indagar la manifestación del proceso de difusión de innovaciones en la fecundidad costarricense, a través de las representaciones sociales de los métodos anticonceptivos y de la maternidad, en mujeres de 20 a 29 años de tres comunidades del país. Del análisis estadístico para 446 distritos con datos de reducción de la fecundidad y nivel socioeconómico de las madres (nivel de instrucción, unión conyugal y ocupación entre 1995-1997 y 2002-2004, se seleccionaron tres distritos para realizar entrevistas en profundidad (Sánchez de Curridabat, Tarbaca de Aserrí y Tayutic de Turrialba. Se encontró que los agentes socializadores de la educación sexual (medios de comunicación, educación formal, religión, servicios de salud y familia, no están cumpliendo un rol de información de calidad sobre la reproducción biológica, y que lo que opera es una difusión conductual más que material, enmarcada dentro de una tradición patriarcal que relega a la mujer a la reproducción social. Entre las entrevistadas de los tres distritos se mantienen desigualdades de acceso a información y respecto a proyectos de vida que vayan más allá del ámbito privado, contribuyendo a mantener inequidades sociales que se reflejan en la fecundidad diferencial actual.

  5. Fideísmo y racionalismo en las tres potencias del alma

    Directory of Open Access Journals (Sweden)

    José Andrés Calvo Rodríguez

    2004-12-01

    Full Text Available Dentro de la gnoseología luliana, las tres potencias del alma racional (Voluntad, Memoria y Entendimiento adquieren una especial importancia por ser los instrumentos del alma que permiten el acceso y el conocimiento del amor divino. A este respecto escribe Cruz Hernández: «Las potencias del alma, además, tanto por su naturaleza como por su actividad, reflejan las virtudes divinas; y, de un modo eminente, la Trinidad personal».1 De esta manera, no hay mejor espejo de Dios en el hombre que el alma, donde reside la presencia divina. Por esto, el Libro de amigo y Amado, considerando la reiterativa presencia de las tres potencias del alma que presenta, simplemente propone un viaje errático por el interior del alma humana en busca de Dios y, en definitiva, en busca del propio yo del místico.

  6. Detection of Planetary Emission from the Exoplanet TrES-2 Using Spitzer/IRAC

    Science.gov (United States)

    Donovan, Francis T.; Charbonneau, David; Harrington, Joseph; Madhusudhan, N.; Seager, Sara; Deming, Drake; Knutson, Heather A.

    2010-01-01

    We present here the results of our observations of TrES-2 using the Infrared Array Camera on Spitzer. We monitored this transiting system during two secondary eclipses, when the planetary emission is blocked by the star. The resulting decrease in flux is 0.127% +/- 0.021%, 0.230% +/- 0.024%, 0.199% +/- 0.054%, and 0.359% +/- 0.060% at 3.6 microns, 4.5 microns, 5.8 microns, and 8.0 microns, respectively. We show that three of these flux contrasts are well fit by a blackbody spectrum with T(sub eff) = 1500 K, as well as by a more detailed model spectrum of a planetary atmosphere. The observed planet-to-star flux ratios in all four lRAC channels can be explained by models with and without a thermal inversion in the atmosphere of TrES-2, although with different atmospheric chemistry. Based on the assumption of thermochemical equilibrium, the chemical composition of the inversion model seems more plausible, making it a more favorable scenario. TrES-2 also falls in the category of highly irradiated planets which have been theoretically predicted to exhibit thermal inversions. However, more observations at infrared and visible wavelengths would be needed to confirm a thermal inversion in this system. Furthermore, we find that the times of the secondary eclipses are consistent with previously published times of transit and the expectation from a circular orbit. This implies that TrES-2 most likely has a circular orbit, and thus does not obtain additional thermal energy from tidal dissipation of a non-zero orbital eccentricity, a proposed explanation for the large radius of this planet. Key words: eclipses - infrared: stars - planetary systems - stars: individual (OSC 03549-02811) - techniques: photometric

  7. TRES ENFOQUES PARA COMPRENDER Y SUPERAR LA POBREZA

    OpenAIRE

    Barrero Rivera, Floralba; Universidad de San Buenaventura

    2012-01-01

    Este escrito presenta tres visiones teóricas y metodológicas para entender y atacar el fenómeno de la pobreza problema actual de América Latina. Primero, enuncia la visión de Amartya Sen, donde se toma el modelo de las oportunidades como una herramienta personal y social, que entiende la pobreza mas allá de los indicadores económicos, la comprende como un conjunto de dificultades que impiden la libertad de elección y acción de los...

  8. en tres sistemas agroforestales

    Directory of Open Access Journals (Sweden)

    Javier Monge Meza

    2006-01-01

    Full Text Available Se estudió el desarrollo inicial (30 meses del duraznillo (Prunus annularis en tres sistemas agroforestales: duraznillo-maíz (Zea mays, duraznillomenta (Satureja viminea y duraznillo-naranjilla (Solanum quitoense, en un sitio en la zona de vida Bosque muy húmedo Montano Bajo, en Costa Rica. Se utilizaron cuatro parcelas de cada sistema agroforestal, con una densidad de 722 árboles/ ha, y un sistema de siembra de árboles en forma de triángulo equilátero, entre los que se intercaló el componente agrícola respectivo de cada sistema agroforestal. La altura media alcanzada por los árboles de duraznillo fue de 226,2, 221,4 y 164,3 cm, para el sistema agroforestal duraznillo-maíz, duraznillo- menta y duraznillo-naranjilla, respectivamente. En cuanto a los volúmenes, éstos variaron entre 0,58 y 1,30 m3/ha. Hubo una diferencia significativa en altura media entre el sistema agroforestal duraznillo-maíz y duraznillo-menta con respecto al de duraznillo-naranjilla. No hubo diferencias con respecto al volumen entre los sistemas de producción

  9. ATMOSPHERE AND SPECTRAL MODELS OF THE KEPLER-FIELD PLANETS HAT-P-7b AND TrES-2

    International Nuclear Information System (INIS)

    Spiegel, David S.; Burrows, Adam

    2010-01-01

    We develop atmosphere models of two of the three Kepler-field planets that were known prior to the start of the Kepler mission (HAT-P-7b and TrES-2). We find that published Kepler and Spitzer data for HAT-P-7b appear to require an extremely hot upper atmosphere on the dayside, with a strong thermal inversion and little day-night redistribution. The Spitzer data for TrES-2 suggest a mild thermal inversion with moderate day-night redistribution. We examine the effect of nonequilibrium chemistry on TrES-2 model atmospheres and find that methane levels must be adjusted by extreme amounts in order to cause even mild changes in atmospheric structure and emergent spectra. Our best-fit models to the Spitzer data for TrES-2 lead us to predict a low secondary eclipse planet-star flux ratio (∼ -5 ) in the Kepler bandpass, which is consistent with what very recent observations have found. Finally, we consider how the Kepler-band optical flux from a hot exoplanet depends on the strength of a possible extra optical absorber in the upper atmosphere. We find that the optical flux is not monotonic in optical opacity, and the non-monotonicity is greater for brighter, hotter stars.

  10. Deformation-specific and deformation-invariant visual object recognition: pose vs identity recognition of people and deforming objects

    Directory of Open Access Journals (Sweden)

    Tristan J Webb

    2014-04-01

    Full Text Available When we see a human sitting down, standing up, or walking, we can recognise one of these poses independently of the individual, or we can recognise the individual person, independently of the pose. The same issues arise for deforming objects. For example, if we see a flag deformed by the wind, either blowing out or hanging languidly, we can usually recognise the flag, independently of its deformation; or we can recognise the deformation independently of the identity of the flag. We hypothesize that these types of recognition can be implemented by the primate visual system using temporo-spatial continuity as objects transform as a learning principle. In particular, we hypothesize that pose or deformation can be learned under conditions in which large numbers of different people are successively seen in the same pose, or objects in the same deformation. We also hypothesize that person-specific representations that are independent of pose, and object-specific representations that are independent of deformation and view, could be built, when individual people or objects are observed successively transforming from one pose or deformation and view to another. These hypotheses were tested in a simulation of the ventral visual system, VisNet, that uses temporal continuity, implemented in a synaptic learning rule with a short-term memory trace of previous neuronal activity, to learn invariant representations. It was found that depending on the statistics of the visual input, either pose-specific or deformation-specific representations could be built that were invariant with respect to individual and view; or that identity-specific representations could be built that were invariant with respect to pose or deformation and view. We propose that this is how pose-specific and pose-invariant, and deformation-specific and deformation-invariant, perceptual representations are built in the brain.

  11. Tres enfoques Deontológicos Acerca de la Vida

    Directory of Open Access Journals (Sweden)

    Edgar Antonio López

    2007-01-01

    Full Text Available Este artículo presenta tres aproximaciones deontológicas a algunos problemas referidos al comienzo, el fin y la reproducción de la vida humana, así como a la preservación de la vida -humana y no humana- en el planeta. En primer lugar se presenta la deontología clásica de Kant y luego las deontologías contemporáneas de Hans Jonas y de Jürgen Habermas.

  12. Evolution des paramètres biochimiques chez les chevaux de sport ...

    African Journals Online (AJOL)

    Evolution des paramètres biochimiques chez les chevaux de sport pendant un test d'effort. ... English Title: Evolution of biochemical parameters in sport horses subjected to a stress test. English Abstract. The study aimed ... The evaluation of the fitness of these racehorses is of great use in assessing the physical conditions.

  13. Divagaciones críticas sobre tres pintores sevillanos

    Directory of Open Access Journals (Sweden)

    Carlos Restrepo Canal

    1964-05-01

    Full Text Available De tres grandes pintores se ufana la ciudad de Sevilla, y los honra como debe, porque estos ilustres hijos suyos dejaron obra que dio fama a la pintura española, y uno de ellos es maestro indiscutible del arte pictórico universal. Son estos artistas, prez de los pinceles españoles, Velázquez, Murillo y Valdés Leal, diferentísimos en su inspiración y en la forma de expresión artísticas pero, sin embargo, identificados en los rasgos generales de la escuela peninsular.

  14. An On-Chip RBC Deformability Checker Significantly Improves Velocity-Deformation Correlation

    Directory of Open Access Journals (Sweden)

    Chia-Hung Dylan Tsai

    2016-10-01

    Full Text Available An on-chip deformability checker is proposed to improve the velocity–deformation correlation for red blood cell (RBC evaluation. RBC deformability has been found related to human diseases, and can be evaluated based on RBC velocity through a microfluidic constriction as in conventional approaches. The correlation between transit velocity and amount of deformation provides statistical information of RBC deformability. However, such correlations are usually only moderate, or even weak, in practical evaluations due to limited range of RBC deformation. To solve this issue, we implemented three constrictions of different width in the proposed checker, so that three different deformation regions can be applied to RBCs. By considering cell responses from the three regions as a whole, we practically extend the range of cell deformation in the evaluation, and could resolve the issue about the limited range of RBC deformation. RBCs from five volunteer subjects were tested using the proposed checker. The results show that the correlation between cell deformation and transit velocity is significantly improved by the proposed deformability checker. The absolute values of the correlation coefficients are increased from an average of 0.54 to 0.92. The effects of cell size, shape and orientation to the evaluation are discussed according to the experimental results. The proposed checker is expected to be useful for RBC evaluation in medical practices.

  15. Neonatal Malaria in the Gambia

    African Journals Online (AJOL)

    Uche

    Inclusion Criteria. All consecutive ... these, 105 (26.5%) satisfied the inclusion criteria ..... Bulletin de la Societe de Pathologie Exotique 1991; ... Revista do Hospital das Clinicas; Faculdade de. Medicina Da Universidade de Sao Paulo. 1993 ...

  16. Tres nuevas especies de Sterculia L. (Sterculiaceae) de Venezuela

    OpenAIRE

    MONDRAGÓN, Alcides

    2005-01-01

    Como resultado del estudio taxonómico del género Sterculia L. (Sterculiaceae) en Venezuela, se describen tres nuevas especies: Sterculia abbreviata, procedente de los estados Amazonas, Aragua, Delta Amacuro, Mérida y Miranda; S. amazonica, a lo largo del Río Ocamo del estado Amazonas, y estado Bolívar; S. steyermarkii, en bosques siempreverdes en las costas del estado Miranda y en el estado Mérida. As a result of a taxonomical study of the genus Sterculia L. (Sterculiaceae) in Venezuela, t...

  17. q-deformed Weinberg-Salam model and q-deformed Maxwell equations

    International Nuclear Information System (INIS)

    Alavi, S.A.; Sarbishaei, M.; Mokhtari, A.

    2000-01-01

    We study the q-deformation of the gauge part of the Weinberg-Salam model and show that the q-deformed theory involves new interactions. We then obtain q-deformed Maxwell equations from which magnetic monopoles appear naturally. (author)

  18. La Copa de los “tres mundos”: Reflexiones sobre globalización, media y la Copa 2014

    OpenAIRE

    Thebaldi, Bruno

    2015-01-01

    Para Santos (2001), hay tres tipos de mundos “en el mismo mundo”. En verdad, cada mundo es vivido de acuerdo con el “lugar de mundo” ocupado por el individuo. En cada mundo hay una manera diferente de ver la globalización. Dependiendo del mundo, la globalización puede ser vista como “fabulosa”, “perversa” o “humanitaria”. En este artículo, discutimos el punto de vista de estos tres tipos de mundo, juntamente con la cuestión...

  19. Cameroun

    African Journals Online (AJOL)

    SARAH

    30 juin 2014 ... yohimbe, Rauvolfia vomitoria, Solanum lycopersicum,. Solanum nigrum, Solanum tuberosum, Voacanga africana, Voacanga thouarsii, Zingiber officinale. Les espèces exotiques sont : Acanthus montanus,. Ageratum conyzoides, Aloe vera, Allium sativum,. Apium graveolens, Amaranthus hybridus, Ananas.

  20. Estimation des paramètres de modèles pour la digestion anaérobie

    OpenAIRE

    Martinez , Ricardo

    2003-01-01

    La finalité de ce travail a été d'estimer de la meilleure manière possible des paramètres de différents modèles sur la respiration anaérobie. Dans un premier temps nous présentons les bases qu'on utilise pour construire les modèles du procédé biochimique. Puis nous faisons une analyse qualitative des modèles les plus connus sur le sujet. Dans un deuxième temps nous avons suggéré différents modèles, afin de mieux estimer les paramètres du modèle initial. Nous avons mis au point un programme d'...

  1. A Spitzer five-band analysis of the Jupiter-sized planet TrES-1

    Energy Technology Data Exchange (ETDEWEB)

    Cubillos, Patricio; Harrington, Joseph; Foster, Andrew S. D.; Lust, Nate B.; Hardy, Ryan A.; Bowman, M. Oliver [Planetary Sciences Group, Department of Physics, University of Central Florida, Orlando, FL 32816-2385 (United States); Madhusudhan, Nikku, E-mail: pcubillos@fulbrightmail.org [Department of Physics and Department of Astronomy, Yale University, New Haven, CT 06511 (United States)

    2014-12-10

    With an equilibrium temperature of 1200 K, TrES-1 is one of the coolest hot Jupiters observed by Spitzer. It was also the first planet discovered by any transit survey and one of the first exoplanets from which thermal emission was directly observed. We analyzed all Spitzer eclipse and transit data for TrES-1 and obtained its eclipse depths and brightness temperatures in the 3.6 μm (0.083% ± 0.024%, 1270 ± 110 K), 4.5 μm (0.094% ± 0.024%, 1126 ± 90 K), 5.8 μm (0.162% ± 0.042%, 1205 ± 130 K), 8.0 μm (0.213% ± 0.042%, 1190 ± 130 K), and 16 μm (0.33% ± 0.12%, 1270 ± 310 K) bands. The eclipse depths can be explained, within 1σ errors, by a standard atmospheric model with solar abundance composition in chemical equilibrium, with or without a thermal inversion. The combined analysis of the transit, eclipse, and radial-velocity ephemerides gives an eccentricity of e=0.033{sub −0.031}{sup +0.015}, consistent with a circular orbit. Since TrES-1's eclipses have low signal-to-noise ratios, we implemented optimal photometry and differential-evolution Markov Chain Monte Carlo (MCMC) algorithms in our Photometry for Orbits, Eclipses, and Transits pipeline. Benefits include higher photometric precision and ∼10 times faster MCMC convergence, with better exploration of the phase space and no manual parameter tuning.

  2. Évolution des paramètres biochimiques chez les vaches laitières ...

    African Journals Online (AJOL)

    expérimentation, ont servi au dosage des paramètres biochimiques. Au deuxième prélèvement ... Blood samples collected before the experiment and during the experiment, were used for the analysis of the biochemical parameters. During the second ...

  3. Tres Torres y un mar: La última obra de Fernando Cassinello

    Directory of Open Access Journals (Sweden)

    García-Sánchez, J. F.

    2014-12-01

    Full Text Available The work of spanish architect, Fernando Cassinello Pérez has been rarely published, although he built a lot and well. His life is based on three areas: architectural production, academic and research activities. In this research his latest work will be discussed: Three Tower triplets Star-Building (1975 was built on the seafront in Zapillo, Almería; and that is a smart residential work of formal investigation and structural sincerity. Star-Building is an example of how, since the resignation and moderate density, it is possible to construct interesting proposals for housing -oriented towards tourism- on the beachfront. Of course, it deserves to be well known by who nowadays decides to design and build collective architecture. The three project versions will be discussed and described, also explaining how the structure and the traces of the process of building are the genesis and story of this work.La obra del arquitecto almeriense Fernando Cassinello Pérez ha sido escasamente publicada, pero lo cierto es que construyó mucho y bien. Su vida descansa sobre tres pilares: la producción arquitectónica, la actividad académica y la inquietud investigadora. Aquí se expondrá su última obra: las Tres Torres trillizas Star-Building (1975 que construyó frente al Paseo Marítimo de Almería, en el barrio de El Zapillo; y que son un elegante ejercicio residencial de investigación formal y sinceridad estructural. También son un ejemplo de cómo, desde la renuncia y con una densidad moderada, es posible construir interesantes propuestas de viviendas –orientadas al turismo– en la primera línea de playa. Y que, desde luego, merecen ser conocida por quien decida hoy proyectar y construir arquitectura colectiva. Se analizarán y describirán las tres versiones del proyecto; y se explicará cómo la estructura y las huellas del proceso de construcción son la génesis y el argumento de esta obra.

  4. Deformation twinning in a creep-deformed nanolaminate structure

    International Nuclear Information System (INIS)

    Hsiung, Luke L

    2010-01-01

    The underlying mechanism of deformation twinning occurring in a TiAl-(γ)/Ti 3 Al-(α 2 ) nanolaminate creep deformed at elevated temperatures has been studied. Since the multiplication and propagation of lattice dislocations in both γ and α 2 thin lamellae are very limited, the total flow of lattice dislocations becomes insufficient to accommodate the accumulated creep strains. Consequently, the movement of interfacial dislocations along the laminate interfaces, i.e., interface sliding, becomes an alternative deformation mode of the nanolaminate structure. Pile-ups of interfacial dislocations occur when interfacial ledges and impinged lattice dislocations act as obstacles to impede the movement of interfacial dislocations. Deformation twinning can accordingly take place to relieve a stress concentration resulting from the pile-up of interfacial dislocations. An interface-controlled twinning mechanism driven by the pile-up and dissociation of interfacial dislocations is accordingly proposed.

  5. Deformation twinning in a creep-deformed nanolaminate structure

    Science.gov (United States)

    Hsiung, Luke L.

    2010-10-01

    The underlying mechanism of deformation twinning occurring in a TiAl-(γ)/Ti3Al-(α2) nanolaminate creep deformed at elevated temperatures has been studied. Since the multiplication and propagation of lattice dislocations in both γ and α2 thin lamellae are very limited, the total flow of lattice dislocations becomes insufficient to accommodate the accumulated creep strains. Consequently, the movement of interfacial dislocations along the laminate interfaces, i.e., interface sliding, becomes an alternative deformation mode of the nanolaminate structure. Pile-ups of interfacial dislocations occur when interfacial ledges and impinged lattice dislocations act as obstacles to impede the movement of interfacial dislocations. Deformation twinning can accordingly take place to relieve a stress concentration resulting from the pile-up of interfacial dislocations. An interface-controlled twinning mechanism driven by the pile-up and dissociation of interfacial dislocations is accordingly proposed.

  6. Tres Danzas Sencillas, Opus 1.

    Directory of Open Access Journals (Sweden)

    Miguel Pinto Campa

    2010-11-01

    Full Text Available Las “Tres Danzas Sencillas” catalogadas con el Opus 1, originalmente fueron escritas para piano en la época que el compositor ocupaba el puesto de  violista principal en la Orquesta Sinfónica de Villaclara, con sede en su ciudad natal, Santa Clara, y donde había nacido Miguel Pinto Campa el 9 de Junio  de 1945; 17 años antes de escribir la primera de estas Danzas, “En forma de Son”, que fuera escrita a petición de la pianista cubana Rosario Franco,  quien la estrenara el día 19 de Mayo de 1965 en el Palacio de Bellas Artes de la Habana y que en una misiva fechada en la ciudad de Matanzas el 29 de mayo de 1965 comenta en uno de sus párrafos.”Estimado Pinto: Le envío anuncios y programas que dan constancia del estreno de su obra. El público estaba muy interesado en saber quien era Ud., por lo que he pedido se agreguen notas al programa para mi próxima gira por Oriente”.................................................

  7. La comunicación en tres casos de acoso laboral

    Directory of Open Access Journals (Sweden)

    Ingrid Carolina Gómez

    2014-01-01

    Full Text Available La investigación tuvo como objetivo identificar elementos y dinámicas de la comunicación, relacionados con la interrupción, distorsión o ruptura de esta, también la descalificación y desacreditación, la denigración e insinuaciones hostiles y la ruptura de los contactos sociales en tres casos de acoso laboral; se partió de un abordaje cualitativo de tipo exploratorio descriptivo. Se aplicó una entrevista semiestructurada construida a partir de categorías de análisis previamente establecidas a los tres participantes quienes habían cumplido con los criterios para acoso laboral, de acuerdo al Cuestionario Leymann (LIPT: Leymann Inventory of Psychological Terror. Durante las entrevistas emergió la categoría estrategias de afrontamiento como elemento relevante para el manejo de la problemática. Se encontró que la comunicación se caracteriza por ser una comunicación verbal abusiva que no queda registrada en ningún soporte físico, salvo en los registros internos y emocionales de las personas que los experimentan y que en las organizaciones las comunicaciones interpersonales y grupales han llegado a niveles precarios en los que predomina la agresividad verbal y no verbal, el aislamiento y la falta de intervención efectiva por parte de instancias de dirección.

  8. TRES AÑOS DE ENSAYOS CON SORGOS GRANIFEROS EN CORRIENTES

    Directory of Open Access Journals (Sweden)

    Héctor Mario Cenoz

    1962-01-01

    Full Text Available En el presente trabajo los autores registran los resultados obtenidos en tres años consecutivos de ensayos comparativos de variedades de sorgos graníferos, incluyendo sorgos de doble propósito, con el objeto de determinar su adaptación a las condiciones ecológicas de la zona y sus rendimientos en granos y forraje verde.Los ensayos fueron sembrados en el campo experimental del Instituto de Botánica Aplicada, ubicado en la Escuela Regional de Agricultulra, Ganadería e Industrias Afines anexa a esta Facultad, cuyo suelo es arenoso, con un subsuelo arcilloso con pH 5,7 a 6,5, pobres en materias orgánicas, nitrógeno total, calcio y fósforo.Los resultados han sido interpretados mediante el análisis de la variancia, considerando los tres años en serie, mostrándose una neta superioridad de los sorgos de doble propósito sobre los sorgos graníferos, tanto en lo referente a rendimientos en granos: como en forraje verde, y observándose  también que los sorgos graníferos híbridos no han superado estadísticamente a las variedades de sorgos graníferos no híbridos, pudiendo considerarse de un valor similar para las condiciones ecológicas de la zona.

  9. Limestones in Treinta y Tres district : Aerial photo of Jose P. Varela - Isla Patrulla

    International Nuclear Information System (INIS)

    Coronel, N.; Heinzen, W.

    1981-01-01

    This work brings information of fields and laboratory samples about the outcrop in Treinta y Tres district in the framework of limestones programme carried out jointly with I.G.U and BGR through the geological German mission

  10. SEROPREVALENCIA DE LA LEPTOSPIROSIS CANINA DE TRES MUNICIPIOS DEL DEPARTAMENTO DEL TOLIMA-COLOMBIA

    Directory of Open Access Journals (Sweden)

    Marlyn Romero P

    2009-08-01

    Full Text Available Objetivo. Determinar la seroprevalencia de Leptospira spp. y los serovares dominantes, en caninos de tres municipios del departamento del Tolima, Colombia. Materiales y métodos. Se realizó un estudio epidemiológico trasversal con 900 caninos localizados en 62 barrios de los tres municipios, de los cuales se obtuvieron muestras de sangre durante los meses de junio, julio y agosto de 2007, que fueron procesadas utilizando la prueba de microaglutinación (MAT. En la prueba se incluyeron 5 serovares: hardjo, pomona, grippotyphosa, canicola, icterohaemorrhagiae y bratislava. La prueba se interpretó como positiva por la presencia de una aglutinación ³50 % de las leptospiras con uno o más serovares, en una dilución del suero ³100. Resultados. La seroprevalencia de leptospirosis en la población canina fue del 20.2%. La mayor dominancia fue para los serovares grippotyphosa (82.4% y pomona (8.2%, observándose una baja reactividad ante canicola e icterohaemorrhagiae, 0.5 y 2.2% respectivamente. Se presentaron coaglutinaciones en el 4.3% de los sueros. La seropositividad presentó diferencias estadísticamente significativas cuando se compararon los resultados por sexo y edad (p=0.038. Conclusiones. Los resultados sugieren que los caninos pueden ser posibles reservorios de la leptospirosis en los tres municipios evaluados, siendo necesario realizar estudios que permitan el aislamiento y tipificación de los serovares prevalentes en las zonas endémicas para orientar las medidas de prevención que eviten el riesgo de transmisión de la enfermedad a la población humana.

  11. Tres chalets de Joachim Schürmann

    Directory of Open Access Journals (Sweden)

    Schürmann, Joachim

    1974-12-01

    Full Text Available This article describes three one family houses; one in Dublin, one for professor Lehmann-Grube and another one in Rosenhohe (Darmstadt. In its outer aspect as well as interior decoration the materials used and the planning are completely different, which corresponds to the different characters of those who live in them, at the same time as they emphasize the flexibility and the excellent work of the architect.En este artículo se describen tres viviendas unifamiliares: una en Dublin, otra para el Dr. Lehmann-Grube y otra en la Rosenhohe (Darmstadt. Tanto su fisonomía exterior como el tratamiento interior, los materiales empleados y la distribución adoptada son completamente diferentes, cual corresponde a la distinta idiosincrasia de sus moradores, a la vez que nos hacen patente la flexibilidad y buen hacer del arquitecto.

  12. Reprodución de tres especies de Clidemia (Melastomataceae en Brasil

    Directory of Open Access Journals (Sweden)

    Gladys Flávia Melo

    1999-09-01

    Full Text Available Se estudió el sistema reproductivo de Clidemia capitellata (Bonpl. D. Don, C. bullosa DC. y C. hirta (L. D. Don. Las tres especies se distribuyen en las márgenes de la selva de Dois Irmos, Recife, Pernambuco, Brasil donde forman pequeñas poblaciones y se pueden calificar como especies simpátricas. El periodo de floración se extiende todo el año. Hay visitas esporádicas de abejas Halictidae (Augochloropsis sp. que recogen polen por vibración ("buzz pollination". Las tres especies son agamospérmicas y muestran un elevado índice de esterilidad masculina, medida por la escasa viabilidad polínica.We compared the reproductive systems in populations of Clidemia capitellata (Bonpl. D. Don, C. bullosa DC. and C. hirta (L. D. Don. (Melastomataceae. The three species occur in small populations in forest margins at Mata de Dois Irmos, Recife, Pernambuco, Brasil and are sympatric. They flower throughout the year, and are occasionaly visited by Halictidae bees, Augochloropsis sp.; the bees collect pollen by vibration ("buzz pollination". The three species are agamospermous and exhibit a high level of male sterility, as measured by their low pollen viability.

  13. Is nucleon deformed?

    International Nuclear Information System (INIS)

    Abbas, Afsar

    1992-01-01

    The surprising answer to this question Is nucleon deformed? is : Yes. The evidence comes from a study of the quark model of the single nucleon and when it is found in a nucleus. It turns out that many of the long standing problems of the Naive Quark Model are taken care of if the nucleon is assumed to be deformed. Only one value of the parameter P D ∼1/4 (which specifies deformation) fits g A (the axial vector coupling constant) for all the semileptonic decay of baryons, the F/D ratio, the pion-nucleon-delta coupling constant fsub(πNΔ), the double delta coupling constant 1 fsub(πΔΔ), the Ml transition moment μΔN and g 1 p the spin structure function of proton 2 . All this gives strong hint that both neutron and proton are deformed. It is important to look for further signatures of this deformation. When this deformed nucleon finds itself in a nuclear medium its deformation decreases. So much that in a heavy nucleus the nucleons are actually spherical. We look into the Gamow-Teller strengths, magnetic moments and magnetic transition strengths in nuclei to study this property. (author). 15 refs

  14. Charges froides actives pour le calibrage des radiomètres micro ...

    African Journals Online (AJOL)

    Nous présentons dans ce papier une synthèse concernant la réalisation de charges froides actives à partir d'un transistor micro onde. Le but de celle-ci est de fournir une source de référence pour les radiomètres qui présentent une faible température de bruit tout en fonctionnant à température ambiante. Une présentation ...

  15. Lope y Boccalini: Tres sonetos de Tomé de Burguillos

    Directory of Open Access Journals (Sweden)

    Arellano, Ignacio

    2012-12-01

    Full Text Available The article analyzes three sonnets of Lope against Traiano Boccalini included in the Rhymes of Tomé de Burguillos, showing the need to compare the Lope´s text with the italian original version of Ragguagli di Parnaso, not with spanish translation of Perez de Sousa, because in this translation are deleted essential passages to understand the game of wit of Lope. These three sonnets are a good example of the complexity of this exercise of conceptism in Lope, whose poetry can not be described as plain, simple and clear: it is a difficult poetry full of games, intertextual allusions and references that should be clarified applying the type of appropiate reading.Se analizan tres sonetos de Lope contra el italiano Traiano Boccalini, incluidos en las Rimas de Tomé de Burguillos, mostrando la necesidad de comparar el texto de Lope con el de los Ragguagli di Parnaso, en su versión original italiana, y no en la traducción de Perez de Sousa, que elimina pasajes necesarios para entender los juegos de Lope. Estos tres sonetos son buena muestra de la complejidad que puede tener este ejercicio de agudeza de Lope, cuya poesía no se puede calificar sin más de llana, sencilla o clara: es una poesía conceptista llena de juegos, alusiones y referencias intertextuales que deben ser aclaradas si se quiere aplicar a estos poemas el tipo de lectura que exigen.

  16. Tres indigenismos en el parlache: concho, cucha/cucho y tote

    OpenAIRE

    DIANA ANDREA GIRALDO GALLEGO

    2015-01-01

    Si bien el parlache surgió en los barrios populares de la ciudad de Medellín (Vila Rubio & Castañeda Naranjo, 2006) cierto léxico usado dentro de este dialecto social proviene de lenguas indígenas americanas, así como lo exponen Castañeda Naranjo & Henao Salazar (2006) en su Diccionario de parlache. En este artículo presento el análisis de tres indigenismos hallados en el mencionado diccionario con sus respectivas propuestas etimológicas: concho, cucha/cucho y tote . Para la identific...

  17. Effets de la perfusion intensive sur quelques paramètres sanguins ...

    African Journals Online (AJOL)

    Objectif: l'objectif de cette étude est d'évaluer les effets d'une perfusion intensive chez des veaux atteints de diarrhée aiguë sur les paramètres sanguins notamment l'hématocrite, les protéines totales, la créatinine et l'urée plasmatiques, le pH, l'excès de base (BE) et le bicarbonate dans le sang. Méthodologie et résultats: ...

  18. Plastic deformation

    NARCIS (Netherlands)

    Sitter, de L.U.

    1937-01-01

    § 1. Plastic deformation of solid matter under high confining pressures has been insufficiently studied. Jeffreys 1) devotes a few paragraphs to deformation of solid matter as a preface to his chapter on the isostasy problem. He distinguishes two properties of solid matter with regard to its

  19. Variabilidad espacial y diaria del contenido de humedad en el suelo en tres sistemas agroforestales

    Directory of Open Access Journals (Sweden)

    Mariela Rivera Peña

    2009-04-01

    Full Text Available En seis puntos de tres transectos (102 m paralelos (9 m en tres sistemas de uso del terreno (Quesungual menor de dos años, SAQ<2, Tradicional de Tala y Quema, TQ y Bosque Secundario, BS se tomaron muestras de suelo a cuatro profundidades (0-5 cm, 5-10 cm, 10-20 cm y 20 a 40 cm y tres horas (09, 11 y 15 durante 9 días. Se modeló el análisis estructural de la variación de los parámetros humedad volumétrica, densidad aparente, carbono orgánico, arena y arcilla. El coeficiente de variación de los parámetros evaluados presentó rangos para densidad aparente (0.76 y 15.1%, carbono orgánico (30.4 y 54.3%, humedad volumétrica (9.5 y 23.5%, arena (12.8 y 22.5% y arcilla (14.0 y 29.2%. En los análisis geoestadísticos el componente al azar de la dependencia espacial predominó sobre el efecto pepita (nugget. Con las funciones de los semivariogramas estructurados para cada variable se generaron mapas de contorno interpolados a escala fina los cuales mostraron heterogeneidad en las propiedades evaluadas. La autocorrelación de Morán (I indicó que rangos de muestreo menores a 9 m podrían ser adecuados para detectar la estructura espacial de la variable humedad volumétrica.

  20. Deformation compensation in dynamic tomography; Compensation de deformations en tomographie dynamique

    Energy Technology Data Exchange (ETDEWEB)

    Desbat, L. [Universite Joseph Fourier, UMR CNRS 5525, 38 - Grenoble (France); Roux, S. [Universite Joseph Fourier, TIMC-IMAG, In3S, Faculte de Medecine, 38 - Grenoble (France)]|[CEA Grenoble, Lab. d' Electronique et de Technologie de l' Informatique (LETI), 38 (France); Grangeat, P. [CEA Grenoble, Lab. d' Electronique et de Technologie de l' Informatique (LETI), 38 (France)

    2005-07-01

    This work is a contribution to the compensation of motion in tomography. New classes of deformation are proposed, that compensates analytically by an algorithm of a F.B.P. type reconstruction. This work makes a generalisation of the known results for affine deformations, in parallel geometry and fan-beam, to deformation classes of infinite dimension able to include strong non linearities. (N.C.)

  1. Leucemia viral felina simultánea con otras patologías en tres casos clínicos diferentes

    OpenAIRE

    Ortiz A, José F

    2011-01-01

    La leucemia viral felina (ViLeF) es una patología, que se asocia con la presentación de varias enfermedades; el artículo presenta tres casos de pacientes cada uno con patologías diferentes que a su vez fueron positivos a ViLeF; no se descarta que esta enfermedad esté relacionada o sea la causa de las tres patologías, en el primer caso se encontró una anemia arregenerativa, en el otro, un carcinoma mamario y en el último, un proceso compatible con una peritonitis felina. Se describen la sintom...

  2. Tres nuevos poblados de la Edad del Hierro en la Protohistoria de Gipuzkoa.

    Directory of Open Access Journals (Sweden)

    Carlos Olaetxea

    1991-01-01

    Full Text Available Se presenta el descubrimiento de tres nuevos poblados de la Edad del Hierro para la provincia de Gipuzkoa. Su importancia estriba en que hasta el presente sólamente se conocía uno, el de Intxur   (Tolosa - Albiztur, y en que han sido descubiertos dentro de un plan sistemático de prospecciones.

  3. Efectividad de un programa en la carga de cuidado para cuidadores familiares en tres grupos culturalmente diversos

    Directory of Open Access Journals (Sweden)

    Yenny Marcela Barreto Zorza

    2017-04-01

    Full Text Available Introducción: El envejecimiento poblacional dado por la transición demográfica y epidemiológica, repercute en la dependencia de las actividades de la vida diaria de los adultos mayores, requiriendo de manera constante los cuidados de personas denominadas “cuidadores”, en quienes se genera una carga que afecta su salud física y mental. Objetivo: Evaluar la efectividad de un programa en la carga de cuidado para cuidadores familiares en tres grupos culturalmente diversos. Metodología: Investigación cuantitativa, de tipo analítico, a partir de los resultados de tres estudios cuasiexperimentales de grupos de cuidadores familiares de personas ancianas dependientes funcionalmente. Participaron 88 cuidadores de tres municipios: Bogotá, Cáqueza y Guapi, en un Programa educativo con acciones de cuidado adaptadas culturalmente. La información se recolectó con la Escala de carga de Zarit, antes y después de la implementación del programa, se realizó un análisis con prueba de rango signado de Wilcoxon en cada uno de los tres grupos. Se consideró aspectos éticos. Resultados: El programa educativo para cuidadoras familiares tuvo un efecto estadísticamente significativo en la carga de cuidado de los cuidadores de Cáqueza (valor p 0.014, posiblemente porque el programa responde a una de las necesidades prioritarias de estos cuidadores que es el cuidado de sí mismos, contrario al encontrado en Bogotá y Guapi. Lo que sugiere continuar estudios con programas a cuidadores con perspectiva cultural. Conclusión: El logro de resultados estadísticamente significativos en las cuidadoras de Cáqueza sugiere que ellas cuentan con una mejor red de apoyo familiar y vecinal, por eso asumen la asistencia al programa con mayor dedicación, integralidad y disposición de tiempo.

  4. Comunicación en el subdesarrollo: tres visiones

    Directory of Open Access Journals (Sweden)

    Jan Servaes

    2015-01-01

    Full Text Available Trataré de exponer una visión general de los paradigmas sobre comunicación y desarrollo. Concibo los paradigmas como estructuras de significado mediadas por otras estructuras. Un paradigma es un juego del lenguaje como expresión de una forma de vida que se aclara al ser comparada con otras alternativas rechazadas. Podemos distinguir en los paradigmas una corriente principal de pensamiento y unos contrapuntos. Por razones obvias trataremos aquí solamente con las ideas de la corriente principal, y pondremos el énfasis en el contexto general del desarrollo dentro del cual opera la comunicación. Distinguiremos tres paradigmas: el de la modernización y crecimiento, el de la dependencia y subdesarrollo, y el de la otredad en un único mundo.

  5. Genotoxicidad sobre linfocitos humanos expuestos a PM10 de tres sitios del Valle de Aburrá (Antioquia)

    OpenAIRE

    Mendoza-Zapata, Lady C.; Orozco-Jiménez, Luz Y.; Zapata-Restrepo, Lina M.; Palacio-Baena, Jaime A.

    2013-01-01

    Objetivo Evaluar la calidad del aire en tres sitios del Valle de Aburrá (Antioquia) a través de la determinación de la genotoxicidad del PM10 en linfocitos humanos. Métodos A partir del valor de referencia de PM10 para Colombia (50 μg/m3/año) se eligieron tres sitios del Valle de Aburrá con diferente promedio de PM10, Barbosa con 25 μg/m3, Corantioquia con 44 μg/m3y Facultad de Minas con 91 μg/m3. Los filtros de PM10 expuestos por 24 horas, se analizaron en la épocas de lluvia, transición y s...

  6. Genotoxicidad sobre linfocitos humanos expuestos a pm10 de tres sitios del valle de aburrá (antioquia)

    OpenAIRE

    Mendoza, Lady Carolina; Orozco Jimenez, luz Yaneth; Zapata Restrepo, Lina Maria; Palacio Baena, Jaime Alberto

    2013-01-01

    Objetivo Evaluar la calidad del aire en tres sitios del Valle de Aburrá (Antioquia) a través de la determinación de la genotoxicidad del PM10 en linfocitos humanos.Métodos A partir del valor de referencia de PM10 para Colombia (50 μg/m3/año) se eligieron tres sitios del Valle de Aburrá con diferente promedio de PM10, Barbosa con 25 μg/m3, Corantioquia con 44 μg/m3y Facultad de Minas con 91 μg/m3. Los filtros de PM10 expuestos por 24 horas, se analizaron en la épocas de lluvia, transición y se...

  7. Libertad de expresión y beligerancia mediática: tres diarios venezolanos en pie de guerra

    Directory of Open Access Journals (Sweden)

    Lic. Sebastián de la Nuez A.

    2002-01-01

    Full Text Available En Venezuela, dentro del marco de conflictividad que ha signado la relación medios-gobierno en los últimos tres años, se ha venido discutiendo lo que podría denominarse La agenda sobre libertad de expresión. Dentro de esta agenda hay varios bloques noticiosos. Su seguimiento a través de tres diarios de circulación nacional constituye la esencia de este trabajo de análisis. Se derivan interesantes conclusiones acerca del tratamiento mediático de esta Agenda y, por ende, del comportamiento de estos periódicos en situación de conflicto abierto con el gobierno de Hugo Chávez.

  8. q-Deformed KP Hierarchy and q-Deformed Constrained KP Hierarchy

    OpenAIRE

    He, Jingsong; Li, Yinghua; Cheng, Yi

    2006-01-01

    Using the determinant representation of gauge transformation operator, we have shown that the general form of $au$ function of the $q$-KP hierarchy is a $q$-deformed generalized Wronskian, which includes the $q$-deformed Wronskian as a special case. On the basis of these, we study the $q$-deformed constrained KP ($q$-cKP) hierarchy, i.e. $l$-constraints of $q$-KP hierarchy. Similar to the ordinary constrained KP (cKP) hierarchy, a large class of solutions of $q$-cKP hierarchy can be represent...

  9. Aves de la confluencia del Caquetá y Orteguaza (Base aérea de Tres Esquinas Colombia

    Directory of Open Access Journals (Sweden)

    Dugand Armando

    1948-06-01

    Full Text Available Los autores enumeran 156 especies y subespecies de aves coleccionadas (410 ejemplares y 24 adicionales observadas entre el 11 de agosto y el 18 de septiembre de 1947 alrededor de la base aérea militar de Tres Esquinas, cerca de la confluencia de los ríos Caquetá y Orteguaza, en la Amazonia colombiana. Entre ellas, 10 se registran por primera vez en la avifauna de Colombia.  La introducción comprende una breve reseña geográfica (un mapa y ecológica (tres fotografías de la región, y algunos datos de interes ornitogeográfico acerca de la presencia allá de tres migratorias (2 del sur y 1 del norte y otras 28 aves que muy raras veces han sido señaladas en Colombia. Además de las diez aves nuevas para este país, se extiende hasta el Alto Caquetá el área de dispersión geográfica de otras 22 (12 colecionadas y 10 observadas que son mas o menos comunes en otras partes del territorio colombiano, pero que hasta ahora no habían sido señaladas en aquella región.

  10. Les deux paramètres de base de la transmission

    OpenAIRE

    2013-01-01

    La dynamique de la transmission de personne à personne qui inclut donc la transmission vectorielle peut être résumée par deux principaux paramètres : le taux de reproduction et l’intervalle sériel ou intergénérationnel (Anderson, May, 1991). 1. Le taux de reproduction Le taux de reproduction de base (R0 : nombre moyen de cas secondaires résultant, au sein d’une population susceptible et au niveau de laquelle aucune mesure de lutte n’est appliquée, du contact avec un sujet infectieux). Pour de...

  11. Notas sobre tres especies de Gigartinaceae (Rhodophyta del litoral peruano

    Directory of Open Access Journals (Sweden)

    Martha Calderón

    2011-05-01

    Full Text Available La gran variabilidad morfológica de la familia Gigartinaceae ha producido constantes cambios taxonómicos en sus especies miembros. Tradicionalmente su taxonomía ha estado basada en caracteres de la morfología externa; sin embargo, recientes estudios morfológicos, respaldados con trabajos moleculares, han delimitado los géneros en base a al desarrollo del cistocarpo y de los tetrasporangios. El presente trabajo revisa y comenta sobre las estructuras morfológicas vegetativas y reproductivas de tres especies presentes en Perú: Chondracanthus chamissoi, Mazzaella denticulata y Chondrus canaliculatus.

  12. Índice de potencial productivo del suelo aplicado a tres fincas ganaderas de ladera en el Valle del Cauca, Colombia

    Directory of Open Access Journals (Sweden)

    Adriana Rojas Palomino

    2009-04-01

    Full Text Available Se evaluó el potencial productivo-PPS en suelos volcánicos de ladera de tres fincas lecheras (Nogales, Refugio y Horizonte en Bolívar, Valle del Cauca, utilizando un indicador mixto de propiedades (físicas, químicas y de actividad biológica del suelo, conductividad térmica y el efecto de manejo con los índices de Compactación (IC y Fertilidad (IF. Se utilizó un diseño completamente al azar con tres tratamientos y cinco repeticiones de acuerdo con zonas homogéneas de humedad edáfica. IC fue moderado en todos los casos y PPS fue medio en las tres fincas no obstante el IF fuera alto en Nogales y moderado en Refugio y Horizonte. La correlación lineal múltiple entre parámetros indicó que IC e IF influyeron aproximadamente en un 70 % sobre PPS.

  13. La ordenanza bioclimática de Tres Cantos, Madrid. Últimos avances en planificación ambiental y sostenible./ The ordinance bioclimatic Tres Cantos, Madrid. Recent developments in environmental planning and sustainable.

    Directory of Open Access Journals (Sweden)

    Higueras García, Ester

    2009-06-01

    Full Text Available Aunque es de todos reconocida la importancia de planificar con criterios ambientales, son muy pocos los casos en los que estos criterios pasan de los objetivos a las propuestas. En el caso de la localidad de Tres Cantos (Madrid se ha obtenido un importante reto: la aprobación de una ordenanza, denominada Ordenanza Bioclimática, que impulsa el desarrollo urbano equilibrado con su territorio, reduce los consumos de suelo y agua, es respetuosa con el paisaje e incentiva la edificación bioclimática frente a otras convencionales./Despite the well-known relevancy of environmental criteria relating to urban planning, they often remain as objectives and do not become proposals. In the case of Tres Cantos, an important challenge has been proposed: the approval of an ordinance, called Bioclimatic Ordinance, that promotes a proportional urban development relating to the territory, that reduces the use of ground and water, that is respectful towards the landscape and encourages bioclimatic construction against the traditional one.

  14. Deformations of superconformal theories

    Energy Technology Data Exchange (ETDEWEB)

    Córdova, Clay [School of Natural Sciences, Institute for Advanced Study,1 Einstein Drive, Princeton, NJ 08540 (United States); Dumitrescu, Thomas T. [Department of Physics, Harvard University,17 Oxford Street, Cambridge, MA 02138 (United States); Intriligator, Kenneth [Department of Physics, University of California,9500 Gilman Drive, San Diego, La Jolla, CA 92093 (United States)

    2016-11-22

    We classify possible supersymmetry-preserving relevant, marginal, and irrelevant deformations of unitary superconformal theories in d≥3 dimensions. Our method only relies on symmetries and unitarity. Hence, the results are model independent and do not require a Lagrangian description. Two unifying themes emerge: first, many theories admit deformations that reside in multiplets together with conserved currents. Such deformations can lead to modifications of the supersymmetry algebra by central and non-central charges. Second, many theories with a sufficient amount of supersymmetry do not admit relevant or marginal deformations, and some admit neither. The classification is complicated by the fact that short superconformal multiplets display a rich variety of sporadic phenomena, including supersymmetric deformations that reside in the middle of a multiplet. We illustrate our results with examples in diverse dimensions. In particular, we explain how the classification of irrelevant supersymmetric deformations can be used to derive known and new constraints on moduli-space effective actions.

  15. Tres casos de odontomas

    Directory of Open Access Journals (Sweden)

    Salvador Javier Santos Medina

    2015-03-01

    Full Text Available Los odontomas son los tumores odontogénicos más comunes, casi siempre se diagnostican accidentalmente, en exámenes radiográficos; pueden sospecharse al retardar el brote dentario o producir maloclusiones. Se clasifican en odontomas compuestos y complejos, ambos constituidos por estructuras dentales como: esmalte, dentina, cemento y tejido pulpar. Su eliminación quirúrgica y la biopsia es el tratamiento de elección. El propósito de este trabajo es reportar tres casos de pacientes atendidos en el Hospital Pediátrico de Las Tunas, todos remitidos previamente por el ortodoncista. El primero, tipo compuesto, en un escolar de 9 años de edad, masculino, asociado a un 31 retenido; el segundo caso se trata de un gran odontoma complejo en una escolar de 11 años de edad, femenina, que produjo interferencia en el brote del 11 y el tercero compuesto; en un escolar de 10 años, masculino, en la línea media entre 11 y 21, con producción de diastema y brote del 12 por palatino. De ellos uno fue descubierto por un examen radiográfico de rutina y los otros dos sospechados por la maloclusión secundaria; todos se trataron quirúrgicamente. Estos casos demuestran la frecuencia de estos tumores en la cavidad bucal y la importancia de la realización de exámenes clínicos y radiográficos para su detección y tratamiento precoz, así como la importancia de la interrelación entre el ortodoncista y el maxilofacial en la resolución satisfactoria de esta entidad

  16. q-Deformed Kink solutions

    International Nuclear Information System (INIS)

    Lima, A.F. de

    2003-01-01

    The q-deformed kink of the λφ 4 -model is obtained via the normalisable ground state eigenfunction of a fluctuation operator associated with the q-deformed hyperbolic functions. The kink mass, the bosonic zero-mode and the q-deformed potential in 1+1 dimensions are found. (author)

  17. Nematofauna de tres especies de lagartijas (Sauria: Tropiduridae y Gekkonidae de la Reserva Nacional de Paracas, Ica, Perú

    Directory of Open Access Journals (Sweden)

    José Pérez Z.

    2013-04-01

    Full Text Available Los nemátodos Thubunaea iguanae y Spauligodon viracochai son reportados para tres especies Spauligodon viracochai son reportados para tres especies Spauligodon viracochai de lagartijas en la Reserva Nacional de Paracas, Ica, Perú. El primer nematodo fue registrado para Microlophus peruvianus y Microlophus peruvianus y Microlophus peruvianus Microlophus thoracicus thoracicus, mientras que el segundo fue registrado para Phyllodactylus angustidigitus. Estos reportes representan dos nuevos hospederos y una nueva localidad para T. iguanae, nematodo reportado por primera vez para Sudamérica, además del registro de un nuevo hospedero para S. viracochai .

  18. COMPARACIÓN SENSORIAL DE TRES FORMULACIONES DE HAMBURGUESAS ELABORADAS A BASE DE TILAPIA ROJA (Oreochromis sp..

    Directory of Open Access Journals (Sweden)

    JOSÉ IGOR HLEAP ZAPATA

    2013-12-01

    Full Text Available Se evaluaron sensorialmente hamburguesas elaboradas a base de tilapia roja y dos formulaciones adicionales, en las cuales se sustituyó un porcentaje de tilapia roja por carne de res, en una, y de cerdo, en la otra. Se plantearon tres formulaciones diferentes: solo de carne de tilapia roja codificada con la cifra aleatoria 8204 y carne de tilapia adicionadas con carne de res y carne de cerdo, identificadas con las cifras 6271 y 3522 respectivamente. Las hamburguesas se sometieron a degustaciones realizadas por un panel de 100 consumidores no entrenados, utilizando una escala hedónica de siete puntos. Se valoró estadísticamente la aprobación de los productos y se determinó que hubo buen agrado y buena aceptación. Los resultados indicaron una conformidad del 75% para la muestra 8204, mientras que para las muestras 6271 y 3522, ésta fue respectivamente de 78% y 82%. A pesar de que se presentaron algunas diferencias entre el porcentaje de aceptación de las tres formulaciones, el intervalo de varianza no es significativo, lo cual permitió concluir que los tres productos analizados fueron de completa satisfacción. Se concluyó que las diferencias entre las hamburguesas elaboradas solo a base de tilapia versus las elaboradas a base de tilapia con adición de otras carnes no influyeron en la aceptación por los consumidores.

  19. Experimental deformation of a mafic rock - interplay between fracturing, reaction and viscous deformation

    Science.gov (United States)

    Marti, Sina; Stünitz, Holger; Heilbronner, Renée; Plümper, Oliver; Drury, Martyn

    2016-04-01

    Deformation experiments were performed on natural Maryland Diabase (˜ 55% Plg, 42% Px, 3% accessories, 0.18 wt.-% H2O added) in a Griggs-type deformation apparatus in order to explore the brittle-viscous transition and the interplay between deformation and mineral reactions. Shear experiments at strain rates of ˜ 2e-5 /s are performed, at T=600, 700 and 800°C and confining pressures Pc=1.0 and 1.5 GPa. Deformation localizes in all experiments. Below 700°C, the microstructure is dominated by brittle deformation with a foliation formed by cataclastic flow and high strain accommodated along 3-5 major ultracataclasite shear bands. At 700°C, the bulk of the material still exhibits abundant microfractures, however, deformation localizes into an anastomosing network of shear bands (SB) formed from a fine-grained (<< 1 μm) mixture of newly formed Plg and Amph. These reaction products occur almost exclusively along syn-kinematic structures such as fractures and SB. Experiments at 800°C show extensive mineral reactions, with the main reaction products Amph+Plg (+Zo). Deformation is localized in broad C' and C SB formed by a fine-grained (0.1 - 0.8 μm) mixture of Plg+Amph (+Zo). The onset of mineral reactions in the 700°C experiments shows that reaction kinetics and diffusional mass transport are fast enough to keep up with the short experimental timescales. While in the 700°C experiments brittle processes kinematically contribute to deformation, fracturing is largely absent at 800°C. Diffusive mass transfer dominates. The very small grain size within SB favours a grain size sensitive deformation mechanism. Due to the presence of water (and relatively high supported stresses), dissolution-precipitation creep is interpreted to be the dominant strain accommodating mechanism. From the change of Amph coronas around Px clasts with strain, we can determine that Amph is re-dissolved at high stress sites while growing in low stress sites, showing the ability of Amph to

  20. Répartition des paramètres physico-chimiques et métalliques des ...

    African Journals Online (AJOL)

    ibaa

    Mots clés: Eaux usées, eau de mer, paramètres physiques et métalliques, spectrophotométrie, interaction, .... la solubilité des gaz. Elle favorise aussi l'auto épuration et accroit la vitesse de sédimentation, ce qui peut présenter un intérêt dans les stations d'épuration (Djermakoye,. 2005). ..... atomic absorption spectrometry. J.

  1. Deformation of second and third quantization

    Science.gov (United States)

    Faizal, Mir

    2015-03-01

    In this paper, we will deform the second and third quantized theories by deforming the canonical commutation relations in such a way that they become consistent with the generalized uncertainty principle. Thus, we will first deform the second quantized commutator and obtain a deformed version of the Wheeler-DeWitt equation. Then we will further deform the third quantized theory by deforming the third quantized canonical commutation relation. This way we will obtain a deformed version of the third quantized theory for the multiverse.

  2. Las tres dimensiones en la planificación territorial (del PRMC

    Directory of Open Access Journals (Sweden)

    Roberto Morales Muñoz

    2001-12-01

    Full Text Available Equilibrar la balanza, en sentido figurado, según los principios del desarrollo sustentable, significa que las propuestas, en este caso, de ordenamiento territorial efectuadas a través de los instrumentos de planificación urbana e intercomunal, deben compatibilizar en lo principal, tres importantes dimensiones, no tan sólo en los análisis, sino que también, en los criterios y objetivos del planeamiento. Estas son, la dimensión productiva, la dimensión social y la dimensión ambiental.

  3. Treinta y Tres stratigraphic terrain: ex Cuchilla Dionisio terrain. Uruguay

    International Nuclear Information System (INIS)

    Bossi, J.

    2010-01-01

    From 1998 we are discussing if the eastern area of ZCSB is an allochtonous block named TCD or if it belongs to Dom Feliciano belt with an age of 500 - 700 Ma. This crustal block is difficult to study because Laguna Merin Graben cut it in two around 4000 k m2 crustal fragments distant s more de 100 km between them. Southern block which was named T PE by Masquelín (2006) was demonstrated as allochtonous by Bossi and Gaucher (2004) destroying the Cdf model but seriously complicating the stratigraphic terminology. It is proposed to do some changes in order to profit the general agreement about allochtomy. The CDT with change by Treinta y Tres terrane; T PE become sub - terrain Punta del Este; sub - terrain Cuchilla Dionisio for the septetrional block. From 1998 we are discussing if the eastern area of ZCSB is an allochtonous block named TCD or if it belongs to Dom Feliciano belt with an age of 500 - 700 Ma. This crustal block is difficult to study because Laguna Merín Graben cut it in two around 4000 k m2 crustal fragments distant s more de 100 km between them. Southern block which was named T PE by Masquelín (2006) was demonstrated as allochtonous by Bossi and Gaucher (2004) destroying the CDF model but seriously complicating the stratigraphic terminology. It is proposed to do some changes in order to profit the general agreement about allochtomy. The CDT with change by Treinta y Tres terrain; TPE become sub - terrain Punta del Este; sub - terrain Cuchilla Dionisio for the septetrional block

  4. Deformations of the Almheiri-Polchinski model

    Energy Technology Data Exchange (ETDEWEB)

    Kyono, Hideki; Okumura, Suguru; Yoshida, Kentaroh [Department of Physics, Kyoto University, Kitashirakawa Oiwake-cho, Kyoto 606-8502 (Japan)

    2017-03-31

    We study deformations of the Almheiri-Polchinski (AP) model by employing the Yang-Baxter deformation technique. The general deformed AdS{sub 2} metric becomes a solution of a deformed AP model. In particular, the dilaton potential is deformed from a simple quadratic form to a hyperbolic function-type potential similarly to integrable deformations. A specific solution is a deformed black hole solution. Because the deformation makes the spacetime structure around the boundary change drastically and a new naked singularity appears, the holographic interpretation is far from trivial. The Hawking temperature is the same as the undeformed case but the Bekenstein-Hawking entropy is modified due to the deformation. This entropy can also be reproduced by evaluating the renormalized stress tensor with an appropriate counter-term on the regularized screen close to the singularity.

  5. Análisis comparativo de la estructura del canto del anuncio de tres poblaciones de Melanophryniscus rubriventris (Vellar, 1947) (Anura: Bufonidae)

    OpenAIRE

    Ferrari, Liliana; Vaira, Marcos

    2008-01-01

    La estructura de la señal acústica en anuros ha sido considerada especie-específica y utilizada incluso para el reconocimiento de nuevas especies indistinguibles por caracteres morfológicos. En este trabajo, presentamos una descripción de la estructura del canto de Melanophryniscus rubriventris y un análisis comparativo de parámetros espectrales y temporales del canto de anuncio en tres poblaciones argentinas, cada una de ellas asignadas a una de las tres subespecies tradicionalmente reconoci...

  6. q-deformed Minkowski space

    International Nuclear Information System (INIS)

    Ogievetsky, O.; Pillin, M.; Schmidke, W.B.; Wess, J.; Zumino, B.

    1993-01-01

    In this lecture I discuss the algebraic structure of a q-deformed four-vector space. It serves as a good example of quantizing Minkowski space. To give a physical interpretation of such a quantized Minkowski space we construct the Hilbert space representation and find that the relevant time and space operators have a discrete spectrum. Thus the q-deformed Minkowski space has a lattice structure. Nevertheless this lattice structure is compatible with the operation of q-deformed Lorentz transformations. The generators of the q-deformed Lorentz group can be represented as linear operators in the same Hilbert space. (orig.)

  7. Rotary deformity in degenerative spondylolisthesis

    International Nuclear Information System (INIS)

    Kang, Sung Gwon; Kim, Jeong; Kho, Hyen Sim; Yun, Sung Su; Oh, Jae Hee; Byen, Ju Nam; Kim, Young Chul

    1994-01-01

    We studied to determine whether the degenerative spondylolisthesis has rotary deformity in addition to forward displacement. We have made analysis of difference of rotary deformity between the 31 study groups of symptomatic degenerative spondylolisthesis and 31 control groups without any symptom, statistically. We also reviewed CT findings in 15 study groups. The mean rotary deformity in study groups was 6.1 degree(the standard deviation is 5.20), and the mean rotary deformity in control groups was 2.52 degree(the standard deviation is 2.16)(p < 0.01). The rotary deformity can be accompanied with degenerative spondylolisthesis. We may consider the rotary deformity as a cause of symptomatic degenerative spondylolisthesis in case that any other cause is not detected

  8. Los tres muros de Paimio

    Directory of Open Access Journals (Sweden)

    Julio Grijalba Bengoetxea

    2017-04-01

    Full Text Available La trayectoria de Alvar Aalto es ciertamente compleja y ha sido relatada por la historiografía oficial diseccionada en etapas más o menos definidas por familias unitarias de proyectos en el tiempo. Así, el sanatorio de Paimio ha pasado a la historia de la arquitectura como la consolidación del Proyecto Moderno en Finlandia, protagonizando, aparentemente, su momento de mayor ortodoxia. Aalto se sintió atraído, desde sus comienzos, por la posibilidad de generar un discurso proyectual propio. Encontró que investigar en torno a la capacidad evocadora de la conciliación de los opuestos le permitía disponer de instrumentos eficaces al servicio del proyecto. La singular presencia de elementos opuestos dialogando define la tarea rectora de una manera de hacer en arquitectura. En Paimio algunas verdades se resisten a ser ocultadas bajo la uniformidad moderna aparente, tantas veces exaltada. Todo ello se revela en innumerables episodios, pero es especialmente visible en la singular composición de los tres muros de las habitaciones. El muro moderno que resulta ingrávido desde su condición abstracta. El muro pesado, definido a través de sus cualidades materiales, vinculado a la tradición decimonónica. Y finalmente el muro inmaterial, dotado de atributos próximos a la invisibilidad, de profundas referencias orientales.

  9. Extremely deformable structures

    CERN Document Server

    2015-01-01

    Recently, a new research stimulus has derived from the observation that soft structures, such as biological systems, but also rubber and gel, may work in a post critical regime, where elastic elements are subject to extreme deformations, though still exhibiting excellent mechanical performances. This is the realm of ‘extreme mechanics’, to which this book is addressed. The possibility of exploiting highly deformable structures opens new and unexpected technological possibilities. In particular, the challenge is the design of deformable and bi-stable mechanisms which can reach superior mechanical performances and can have a strong impact on several high-tech applications, including stretchable electronics, nanotube serpentines, deployable structures for aerospace engineering, cable deployment in the ocean, but also sensors and flexible actuators and vibration absorbers. Readers are introduced to a variety of interrelated topics involving the mechanics of extremely deformable structures, with emphasis on ...

  10. Deforming tachyon kinks and tachyon potentials

    International Nuclear Information System (INIS)

    Afonso, Victor I.; Bazeia, Dionisio; Brito, Francisco A.

    2006-01-01

    In this paper we investigate deformation of tachyon potentials and tachyon kink solutions. We consider the deformation of a DBI type action with gauge and tachyon fields living on D1-brane and D3-brane world-volume. We deform tachyon potentials to get other consistent tachyon potentials by using properly a deformation function depending on the gauge field components. Resolutions of singular tachyon kinks via deformation and applications of deformed tachyon potentials to scalar cosmology scenario are discussed

  11. Effets de l'amprolin-300 Ws sur quelques paramètres de croissance ...

    African Journals Online (AJOL)

    SARAH

    31 juil. 2014 ... RESUME. Objectif : L'objectif de la présente étude a été de rechercher les effets de l'Amprolin-300, un anticoccidien largement utilisé en médecine vétérinaire, sur quelques paramètres de croissance et de reproduction chez le lapin mâle de race locale. Méthodologie et résultats : Vingt-quatre (24) lapins ...

  12. Variación temporal y espacial de aves playeras en la laguna Barra de Navidad, Jalisco, en tres temporadas no reproductivas

    OpenAIRE

    Salvador Hernández; Sergio Serrano; Xóchitl A. Hernández; María Isabel Robles

    2012-01-01

    Hay un escaso conocimiento de las aves playeras en los humedales costeros de Jalisco, y en particular en la laguna Barra de Navidad. El presente trabajo contribuye al conocimiento de este grupo de aves y describe su distribución temporal y espacial en la laguna Barra de Navidad durante tres temporadas no reproductivas (1999-2000, 2006-2007 y 2008-2009). Se realizaron censos mensuales de noviembre-abril en las tres temporadas con el fin de registrar todas las especies de aves playeras. Se iden...

  13. q-deformed Brownian motion

    CERN Document Server

    Man'ko, V I

    1993-01-01

    Brownian motion may be embedded in the Fock space of bosonic free field in one dimension.Extending this correspondence to a family of creation and annihilation operators satisfying a q-deformed algebra, the notion of q-deformation is carried from the algebra to the domain of stochastic processes.The properties of q-deformed Brownian motion, in particular its non-Gaussian nature and cumulant structure,are established.

  14. Liderazgo pedagógico y desempeño docente en tres instituciones educativas de la red 14, UGEL 01 -2015

    OpenAIRE

    Jara Silverio, Carmen Violeta

    2016-01-01

    La presente investigación titulada Liderazgo pedagógico y desempeño docente en tres instituciones educativas de la UGEL 01 de la red 14 en el año 2015. Tuvo como objetivo general demostrar la asociación que existe entre las variables liderazgo pedagógico y desempeño docente en tres instituciones educativas de la red 14 UGEL 01 en el año 2015. Se utilizó la técnica de la encuesta para recolectar datos encuesta y el cuestionario como instrumento, con el fin de recopilar informaci...

  15. In-situ studies of bulk deformation structures: Static properties under load and dynamics during deformation

    DEFF Research Database (Denmark)

    Jakobsen, Bo

    2006-01-01

    The main goal of the study presented in this thesis was to perform in-situ investigations on deformation structures in plastically deformed polycrystalline copper at low degrees of tensile deformation (model system for cell forming pure fcc metals. Anovel synchrotron...... grains in polycrystalline samples during tensile deformation. We have shown that the resulting 3D reciprocal space maps from tensile deformed copper comprise a pronounced structure, consisting of bright sharp peaks superimposed on a cloud of enhanced intensity. Based on the integrated intensity......, the width of the peaks, and spatial scanning experiments it is concluded that the individual peaks arise from individual dislocation-free regions (the subgrains) in the dislocation structure. The cloud is attributed to the dislocation rich walls. Samples deformed to 2% tensile strain were investigated under...

  16. Effect of alloy deformation on the average spacing parameters of non-deforming particles

    International Nuclear Information System (INIS)

    Fisher, J.; Gurland, J.

    1980-02-01

    It is shown on the basis of stereological definitions and a few simple experiments that the commonly used average dispersion parameters, area fraction (A/sub A/)/sub β/, areal particle density N/sub Aβ/ and mean free path lambda/sub α/, remain invariant during plastic deformation in the case of non-deforming equiaxed particles. Directional effects on the spacing parameters N/sub Aβ/ and lambda/sub α/ arise during uniaxial deformation by rotation and preferred orientation of nonequiaxed particles. Particle arrangement in stringered or layered structures and the effect of deformation on nearest neighbor distances of particles and voids are briefly discussed in relation to strength and fracture theories

  17. Liderazgo directivo y desempeño docente en tres instituciones educativas de la red 25- UGEL 01, período 2015

    OpenAIRE

    Anchayhua Pablo, Alfredo Edilberto

    2016-01-01

    Esta investigación denominado “Liderazgo directivo y desempeño docente en tres instituciones educativas de la red 25, UGEL. 01-período 2015”, tuvo como objetivo general demostrar la correlación que existe entre el liderazgo directivo y desempeño docente de las tres instituciones educativas. La investigación se realizó utilizando el método hipotético deductivo, del tipo básico, nivel descriptivo, diseño no experimental- transversal, la población y muestra de estudio fue de 10...

  18. Cosmetic and Functional Nasal Deformities

    Science.gov (United States)

    ... nasal complaints. Nasal deformity can be categorized as “cosmetic” or “functional.” Cosmetic deformity of the nose results in a less ... taste , nose bleeds and/or recurrent sinusitis . A cosmetic or functional nasal deformity may occur secondary to ...

  19. Hemeroteca digital de la BNE: tres claves de su éxito

    Directory of Open Access Journals (Sweden)

    Rodríguez Fuentes, Lola

    2011-06-01

    Full Text Available Tras cuatro años desde el lanzamiento de Hemeroteca digital en la BNE, y terminada la primera fase del proyecto de digitalización (2008-2010 podemos confirmar su éxito entre nuestros usuarios e investigadores internacionales. En abril de 2011 Hemeroteca digital cuenta con 840 títulos y más de 4.000.000 de páginas. Aquí presentamos las conclusiones de la evaluación que hemos llevado a cabo en la que destacan tres puntos clave: contenido, herramienta de búsqueda y servicios de valor añadido.

  20. Evaluación financiera de la inversión en tres prototipos de finca ganadera en el Pacífico Central de Costa Rica

    Directory of Open Access Journals (Sweden)

    Vilma Amparo Holguín Castaño

    2008-06-01

    Full Text Available El objetivo de este estudio fue hacer un análisis financiero en el corto plazo y calcular indicadores de rentabilidad de inversiones en el largo plazo, en tres prototipos de finca ganadera con escenarios de riesgo e incertidumbre. Se analizaron 33 fincas ganaderas de doble propósito del Pacífico Central de Costa Rica mediante una encuesta de indicadores socioeconómicos, tecnológicos, financieros, de diferentes estrategias de alimentación animal. Mediante un análisis de conglomerados se identificaron tres grupos: sistema eco-amigable (SEA; sistemas intensivos convencionales (SIC y sistema extensivo tradicional (SET. El análisis beneficio-costo se realizó en tres fincas tipo de cada conglomerado. El tipo SIC fue el más rentable (VAN: $US4314. Los tres modelos mostraron alta sensibilidad a los cambios en los precios de la leche. Las variaciones en los costos de insumos y mano de obra develan una mayor inelasticidad expresada en los bajos valores de la pendiente de las ecuaciones (SET = 717.9; SIC = 6168.9; SEA = 1535.7. La simulación que incorpora riesgo sugirió al modelo SEA como el más beneficiado cuando se mejora la alimentación de los animales. El incremento en la rentabilidad en los tres prototipos al introducir recursos endógenos en el sistema de alimentación constituyó un estímulo para avanzar en un modelo de intensificación, menos dependiente de insumos externos y amigable con el ambiente.

  1. Deformation-induced crystallographic-preferred orientation of hcp-iron: An experimental study using a deformation-DIA apparatus

    Science.gov (United States)

    Nishihara, Yu; Ohuchi, Tomohiro; Kawazoe, Takaaki; Seto, Yusuke; Maruyama, Genta; Higo, Yuji; Funakoshi, Ken-ichi; Tange, Yoshinori; Irifune, Tetsuo

    2018-05-01

    Shear and uniaxial deformation experiments on hexagonal close-packed iron (hcp-Fe) was conducted using a deformation-DIA apparatus at a pressure of 13-17 GPa and a temperature of 723 K to determine its deformation-induced crystallographic-preferred orientation (CPO). Development of the CPO in the deforming sample is determined in-situ based on two-dimensional X-ray diffraction using monochromatic synchrotron X-rays. In the shear deformation geometry, the and axes gradually align to be sub-parallel to the shear plane normal and shear direction, respectively, from the initial random texture. In the uniaxial compression and tensile geometry, the and axes, respectively, gradually align along the direction of the uniaxial deformation axis. These results suggest that basal slip (0001) is the dominant slip system in hcp-Fe under the studied deformation conditions. The P-wave anisotropy for a shear deformed sample was calculated using elastic constants at the inner core condition by recent ab-initio calculations. Strength of the calculated anisotropy was comparable to or higher than axisymmetric anisotropy in Earth's inner core.

  2. Wáshington Delgado: una visión y tres nudos de la Literatura Peruana

    Directory of Open Access Journals (Sweden)

    Américo Mudarra Montoya

    2011-05-01

    Full Text Available Dentro de la producción literaria de Wáshington Delgado (Cusco,1927-Lima, 2003 destaca la figura del creador, del poeta y a elladebemos sumar la imagen del maestro y del crítico. El eje que articulaestas tres construcciones figurativas es la figura del lector, lectorincansable que se solaza con los mundos mágicos de la literatura. UnQuijote que vive con sus personajes de papel, con sus fantasías y sueñosficcionales: un sujeto que dialoga creativamente con sus autorespreferidos como Salinas, Cervantes, Brecht, Vallejo, etc. Así como elhombre creador es por esencia reflexivo, inquieto por comprender yrenovar su entorno vital, el poeta fue también crítico literario y sobretodo maestro, anhelada condición que envuelve tanto al creador comoal analista. Por ello, la reflexión sobre la literatura peruana de Delgado se fundamenta en una comprensión hermenéutica del fenómenoliterario que construye una visión integral del proceso literariorepublicano y con intuición y agudeza identifica tres núcleos conflictivosque definen el campo literario nacional.

  3. PERIODICIDAD DIURNA DE TRES ESPECIES ENDEMICAS DE MILIPEDOS (ARTHROSPHAERA EN LOS GHATS OCCIDENTALES, INDIA

    Directory of Open Access Journals (Sweden)

    B.S. Kadamannaya

    2009-02-01

    Full Text Available   Se evaluó la periodicidad diurna y conducta de tres species endémicas de milipedos pertenecientes al género Arthrosphaera (Sphaerotheriidae (Arthrosphaera dalyi, A. davisoni y A. fumosa en dos plantaciones mixtas (Kadaba y Basrikallu y en un bosque semi-perene (Madikeri durante la estación de monzon. El incremento de las temperaturas del aire (27.44 °C y suelo (26.13 °C indujeron un fase de descanso en A. dalyi en Kadaba. La fase de descanso no fue influenciada por la temperatura en A. davisoni (Basrikallu: aire, 20.5 °C, suelo 19.81 °C y en A. fumosa (Madikeri: aire, 19.69 °C, suelo 19.13 °C debido a las relativamente bajas temperaturas en su habitat. En el patron de conducta diurna, la mayoría de las actividades de Arthrosphaera estan confinadas al crepusculo o noche. Los patrones de conducta diurna de estas tres especies son predichas por diferencias entre localidades geográficas y habitat.

  4. PRODUCCIÓN DE TRES VARIEDADES DE Pennisetum purpureum FERTILIZADAS CON DOS DIFERENTES FUENTES NITROGENADAS EN YUCATÁN, MÉXICO

    Directory of Open Access Journals (Sweden)

    Ramos Trejo O

    2013-01-01

    Full Text Available El objetivo del trabajo fue evaluar el rendimiento (t MS ha-1 año-1 y porcentaje de proteína cruda (calidad nutritiva del pasto King grass (KNG y los clones Cubanos OM-22 y CT-115, fertilizadas con dos fuentes nitrogenadas. Las parcelas se establecieron con varetas de material vegetativo de 25 cm de largo con dos a tres yemas en surcos a 10 cm de profundidad. El marco de siembra fue de 0.5 m entre plantas y 1.0 m entre hileras con orientación de Este a Oeste. Se utilizó Urea y Agua Residual Porcina (ARP como fuentes de nitrógeno (N a dosis de 300 Kg de N ha-1 año-1. Se encontró diferencia significativa (p<0.05 en producción de materia seca (MS entre las tres variedades de forraje, el mayor rendimiento fue para el OM-22 con 155 y 160 t MS ha-1 año -1 con el uso de Urea y ARP, respectivamente. Se observó la misma tendencia con KNG con rendimiento de 131 a 140 t de MS ha-1 año-1. Las variedades OM-22, CT-115 y KNG fueron diferentes estadísticamente (p<0.05 al tratamiento testigo. No se observó efecto en la composición química por la aplicación de N. Se obtuvieron valores entre 8 y 12 % de proteína cruda (PC en los tres ecotipos. Se concluye que la fertilización con las dos fuentes nitrogenadas (Urea y ARP mejora la producción de forraje en los tres ecotipos evaluados.

  5. Neutron halo in deformed nuclei

    International Nuclear Information System (INIS)

    Zhou Shangui; Meng Jie; Ring, P.; Zhao Enguang

    2010-01-01

    Halo phenomena in deformed nuclei are investigated within a deformed relativistic Hartree Bogoliubov (DRHB) theory. These weakly bound quantum systems present interesting examples for the study of the interdependence between the deformation of the core and the particles in the halo. Contributions of the halo, deformation effects, and large spatial extensions of these systems are described in a fully self-consistent way by the DRHB equations in a spherical Woods-Saxon basis with the proper asymptotic behavior at a large distance from the nuclear center. Magnesium and neon isotopes are studied and detailed results are presented for the deformed neutron-rich and weakly bound nucleus 44 Mg. The core of this nucleus is prolate, but the halo has a slightly oblate shape. This indicates a decoupling of the halo orbitals from the deformation of the core. The generic conditions for the occurrence of this decoupling effects are discussed.

  6. Mechanics of deformable bodies

    CERN Document Server

    Sommerfeld, Arnold Johannes Wilhelm

    1950-01-01

    Mechanics of Deformable Bodies: Lectures on Theoretical Physics, Volume II covers topics on the mechanics of deformable bodies. The book discusses the kinematics, statics, and dynamics of deformable bodies; the vortex theory; as well as the theory of waves. The text also describes the flow with given boundaries. Supplementary notes on selected hydrodynamic problems and supplements to the theory of elasticity are provided. Physicists, mathematicians, and students taking related courses will find the book useful.

  7. Quantum deformed magnon kinematics

    OpenAIRE

    Gómez, César; Hernández Redondo, Rafael

    2007-01-01

    The dispersion relation for planar N=4 supersymmetric Yang-Mills is identified with the Casimir of a quantum deformed two-dimensional kinematical symmetry, E_q(1,1). The quantum deformed symmetry algebra is generated by the momentum, energy and boost, with deformation parameter q=e^{2\\pi i/\\lambda}. Representing the boost as the infinitesimal generator for translations on the rapidity space leads to an elliptic uniformization with crossing transformations implemented through translations by t...

  8. Variabilidad espacial y diaria del contenido de humedad en el suelo en tres sistemas agroforestales

    Directory of Open Access Journals (Sweden)

    Menjivar Flores Juan Carlos

    2009-06-01

    Full Text Available En seis puntos de tres transectos (102 m paralelos (9 m en tres sistemas de uso del terreno (Quesungual menor de dos años, SAQ<2, Tradicional de Tala y Quema, TQ y Bosque Secundario, BS se tomaron muestras de suelo a cuatro profundidades (0-5 cm, 5-10 cm, 10-20 cm y 20 a 40 cm y tres horas (09, 11 y 15 durante 9 días. Se modeló el análisis estructural de la variación de los parámetros humedad volumétrica, densidad aparente, carbono orgánico, arena y arcilla. El coeficiente de variación de los parámetros evaluados presentó rangos para densidad aparente (0.76 y 15.1%, carbono orgánico (30.4 y 54.3%, humedad volumétrica (9.5 y 23.5%, arena (12.8 y 22.5% y arcilla (14.0 y 29.2%. En los análisis geoestadísticos el componente al azar de la dependencia espacial predominó sobre el efecto pepita (nugget. Con las funciones de los semivariogramas estructurados para cada variable se generaron mapas de contorno interpolados a escala fina los cuales mostraron heterogeneidad en las propiedades evaluadas. La autocorrelación de Morán (I indicó que rangos de muestreo menores a 9 m podrían ser adecuados para detectar la estructura espacial de la variable humedad volumétrica.

  9. Tres casos de variación morfosintáctica en el español actual

    Directory of Open Access Journals (Sweden)

    Paola Bentivoglio

    1996-12-01

    Full Text Available En este artículo se estudian tres casos de variación morfosintáctica en el español actual; el primero concierne a la alternancia entre dos formas de futuro, el segundo, a los usos del verbo haber "impersonal" y, el tercero, al empleo del llamado que galicado.

  10. Thorax deformity, joint hypermobility and anxiety disorder

    International Nuclear Information System (INIS)

    Gulsun, M.; Dumlu, K.; Erbas, M.; Yilmaz, Mehmet B.; Pinar, M.; Tonbul, M.; Celik, C.; Ozdemir, B.

    2007-01-01

    Objective was to evaluate the association between thorax deformities, panic disorder and joint hypermobility. The study includes 52 males diagnosed with thorax deformity, and 40 healthy male controls without thorax deformity, in Tatvan Bitlis and Isparta, Turkey. The study was carried out from 2004 to 2006. The teleradiographic and thoracic lateral images of the subjects were evaluated to obtain the Beighton scores; subjects psychiatric conditions were evaluated using the Structured Clinical Interview for DSM-IV Axis I Disorders (SCID-1), and the Hamilton Anxiety Scale (HAM-A) was applied in order to determine the anxiety levels. Both the subjects and controls were compared in sociodemographic, anxiety levels and joint mobility levels. In addition, males with joint hypermobility and thorax deformity were compared to the group with thorax deformity without joint hypermobility. A significant difference in HAM-A scores was found between the groups with thorax deformity and without. In addition, 21 subjects with thorax deformity met the joint hypermobility criteria in the group with thorax deformity and 7 subjects without thorax deformity met the joint hypermobility criteria in the group without thorax deformity, according to Beighton scoring. The Beighton score of subjects with thorax deformity were significantly different from those of the group without deformity. Additionally, anxiety scores of the males with thorax deformity and joint hypermobility were found higher than males with thorax deformity without joint hypermobility. Anxiety disorders, particularly panic disorder, have a significantly higher distribution in males subjects with thorax deformity compared to the healthy control group. In addition, the anxiety level of males with thorax deformity and joint hypermobility is higher than males with thorax deformity without joint hypermobility. (author)

  11. Deformed configurations, band structures and spectroscopic ...

    Indian Academy of Sciences (India)

    2014-03-20

    Mar 20, 2014 ... The deformed configurations and rotational band structures in =50 Ge and Se nuclei are studied by deformed Hartree–Fock with quadrupole constraint and angular momentum projection. Apart from the `almost' spherical HF solution, a well-deformed configuration occurs at low excitation. A deformed ...

  12. Diffeomorphic Statistical Deformation Models

    DEFF Research Database (Denmark)

    Hansen, Michael Sass; Hansen, Mads/Fogtman; Larsen, Rasmus

    2007-01-01

    In this paper we present a new method for constructing diffeomorphic statistical deformation models in arbitrary dimensional images with a nonlinear generative model and a linear parameter space. Our deformation model is a modified version of the diffeomorphic model introduced by Cootes et al....... The modifications ensure that no boundary restriction has to be enforced on the parameter space to prevent folds or tears in the deformation field. For straightforward statistical analysis, principal component analysis and sparse methods, we assume that the parameters for a class of deformations lie on a linear...... with ground truth in form of manual expert annotations, and compared to Cootes's model. We anticipate applications in unconstrained diffeomorphic synthesis of images, e.g. for tracking, segmentation, registration or classification purposes....

  13. Deformation mechanisms in the San Andreas Fault zone - a comparison between natural and experimentally deformed microstructures

    Science.gov (United States)

    van Diggelen, Esther; Holdsworth, Robert; de Bresser, Hans; Spiers, Chris

    2010-05-01

    The San Andreas Fault (SAF) in California marks the boundary between the Pacific plate and the North American plate. The San Andreas Fault Observatory at Depth (SAFOD) is located 9 km northwest of the town of Parkfield, CA and provide an extensive set of samples through the SAF. The SAFOD drill hole encountered different lithologies, including arkosic sediments from the Salinian block (Pacific plate) and claystones and siltstones from the Great Valley block (North American plate). Fault deformation in the area is mainly by a combination of micro-earthquakes and fault creep. Deformation of the borehole casing indicated that the SAFOD drill hole cross cuts two actively deforming strands of the SAF. In order to determine the deformation mechanisms in the actively creeping fault segments, we have studied thin sections obtained from SAFOD phase 3 core material using optical and electron microscopy, and we have compared these natural SAFOD microstructures with microstructures developed in simulated fault gouges deformed in laboratory shear experiments. The phase 3 core material is divided in three different core intervals consisting of different lithologies. Core interval 1 consists of mildly deformed Salinian rocks that show evidence of cataclasis, pressure solution and reaction of feldspar to form phyllosilicates, all common processes in upper crustal rocks. Most of Core interval 3 (Great Valley) is also only mildly deformed and very similar to Core interval 1. Bedding and some sedimentary features are still visible, together with limited evidence for cataclasis and pressure solution, and reaction of feldspar to form phyllosilicates. However, in between the relatively undeformed rocks, Core interval 3 encountered a zone of foliated fault gouge, consisting mostly of phyllosilicates. This zone is correlated with one of the zones of localized deformation of the borehole casing, i.e. with an actively deforming strand of the SAF. The fault gouge zone shows a strong, chaotic

  14. ESTUDIO COMPARATIVO DE LOS COMPUESTOS VOLÁTILES DE TRES VARIEDADES DE GUAYABA BLANCA (Psidium guajava L. DURANTE SU MADURACIÓN

    Directory of Open Access Journals (Sweden)

    Johanna Cantillo

    2011-05-01

    Full Text Available Regional Blanca (RB y Ráquira (RQ. Seutilizó el método Headspace-Microextracciónen Fase Sólida (HS-MEFS paracomparar los perfiles olfativos de tres variedadesde guayaba blanca de la regiónde la hoya del río Suárez (Santander, Colombiadurante tres etapas de maduración(verde, pintón y maduro. En las tresvariedades se presentó un comportamientosimilar, los aldehídos C-6 (hexanal,(Z-3-hexenal y (E-2-hexenal responsablesde la nota verde disminuyen durantela maduración, mientras que el contenidode ésteres (acetato de hexilo y acetato de(Z-3-hexenilo aumenta produciéndoselas notas dulce y frutal características dela fruta madura. Los compuestos ácidos,furánicos y alcoholes se observan en bajasproporciones durante las tres etapas.El análisis de los compuestos volátilesmediante HS-MEFS permitió estableceruna relación entre la transformación decompuestos aldehídos C6, responsablesde la nota verde, en ésteres análogos, alos cuales se les atribuye la nota frutalcaracterística durante el proceso demaduración.

  15. Interfacial Bubble Deformations

    Science.gov (United States)

    Seymour, Brian; Shabane, Parvis; Cypull, Olivia; Cheng, Shengfeng; Feitosa, Klebert

    Soap bubbles floating at an air-water experience deformations as a result of surface tension and hydrostatic forces. In this experiment, we investigate the nature of such deformations by taking cross-sectional images of bubbles of different volumes. The results show that as their volume increases, bubbles transition from spherical to hemispherical shape. The deformation of the interface also changes with bubble volume with the capillary rise converging to the capillary length as volume increases. The profile of the top and bottom of the bubble and the capillary rise are completely determined by the volume and pressure differences. James Madison University Department of Physics and Astronomy, 4VA Consortium, Research Corporation for Advancement of Science.

  16. Deformation behaviour of turbine foundations

    International Nuclear Information System (INIS)

    Koch, W.; Klitzing, R.; Pietzonka, R.; Wehr, J.

    1979-01-01

    The effects of foundation deformation on alignment in turbine generator sets have gained significance with the transition to modern units at the limit of design possibilities. It is therefore necessary to obtain clarification about the remaining operational variations of turbine foundations. Static measurement programmes, which cover both deformation processes as well as individual conditions of deformation are described in the paper. In order to explain the deformations measured structural engineering model calculations are being undertaken which indicate the effect of limiting factors. (orig.) [de

  17. Late-Paleozoic-Mesozoic deformational and deformation related metamorphic structures of Kuznetsk-Altai region

    Science.gov (United States)

    Zinoviev, Sergei

    2014-05-01

    Kuznetsk-Altai region is a part of the Central Asian Orogenic Belt. The nature and formation mechanisms of the observed structure of Kuznetsk-Altai region are interpreted by the author as the consequence of convergence of Tuva-Mongolian and Junggar lithospheric block structures and energy of collision interaction between the blocks of crust in Late-Paleozoic-Mesozoic period. Tectonic zoning of Kuznetsk-Altai region is based on the principle of adequate description of geological medium (without methods of 'primary' state recovery). The initial indication of this convergence is the crust thickening in the zone of collision. On the surface the mechanisms of lateral compression form a regional elevation; with this elevation growth the 'mountain roots' start growing. With an approach of blocks an interblock elevation is divided into various fragments, and these fragments interact in the manner of collision. The physical expression of collision mechanisms are periodic pulses of seismic activity. The main tectonic consequence of the block convergence and collision of interblock units is formation of an ensemble of regional structures of the deformation type on the basis of previous 'pre-collision' geological substratum [Chikov et al., 2012]. This ensemble includes: 1) allochthonous and autochthonous blocks of weakly deformed substratum; 2) folded (folded-thrust) systems; 3) dynamic metamorphism zones of regional shears and main faults. Characteristic of the main structures includes: the position of sedimentary, magmatic and PT-metamorphic rocks, the degree of rock dynamometamorphism and variety rock body deformation, as well as the styles and concentrations of mechanic deformations. 1) block terranes have weakly elongated or isometric shape in plane, and they are the systems of block structures of pre-collision substratum separated by the younger zones of interblock deformations. They stand out among the main deformation systems, and the smallest are included into the

  18. Deformation microstructures

    DEFF Research Database (Denmark)

    Hansen, N.; Huang, X.; Hughes, D.A.

    2004-01-01

    Microstructural characterization and modeling has shown that a variety of metals deformed by different thermomechanical processes follows a general path of grain subdivision, by dislocation boundaries and high angle boundaries. This subdivision has been observed to very small structural scales...... of the order of 10 nm, produced by deformation under large sliding loads. Limits to the evolution of microstructural parameters during monotonic loading have been investigated based on a characterization by transmission electron microscopy. Such limits have been observed at an equivalent strain of about 10...

  19. q-Deformed nonlinear maps

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 64; Issue 3 ... Keywords. Nonlinear dynamics; logistic map; -deformation; Tsallis statistics. ... As a specific example, a -deformation procedure is applied to the logistic map. Compared ...

  20. Caracterización de tres índices de cosecha de cacao de los clones CCN51, ICS60 e ICS 95, en la montaña santandereana, Colombia

    Directory of Open Access Journals (Sweden)

    Lucas Fernando Quintana Fuentes

    2015-03-01

    Full Text Available En Colombia la región con mayor producción de cacao es la denominada montaña santandereana, que se ubica entre los pisos térmicos cálido y templado donde se cultiva cacao entre los 200 a 1200 msnm. en los departamentos de Santander y Norte de Santander. Esta investigación surge como una necesidad de la Federación nacional de cacaoteros, Fedecacao, con el propósito de construir herramientas que permitan a futuro tomar decisiones sobre el manejo poscosecha del fruto, buscando una mejora continua de la calidad e incrementando así la competitividad en los mercados. El objetivo fue evaluar tres variables: índice de mazorca, índice de grano y porcentaje de cascarilla, según la Norma Técnica Colombiana 1252, en tres franjas altitudinales de la montaña santandereana, para tres clones introducidos: CCN 51, ICS 60 e ICS 95. El seguimiento y análisis de las tres variables se registró en dos cosechas denominadas principal e intermedia, en tres fincas para cada franja altitudinal y en los tres clones. Se determinó la manera cómo esta condición influye en el resultado de estas variables relacionadas con el rendimiento y la calidad, mediante la evaluación de los datos obtenidos a través de métodos estadísticos de correlación y de determinación, estableciéndose que no hay diferencias significativas que permitan concluir que la altitud influye en estas variables de calidad.

  1. Deformation twinning: Influence of strain rate

    Energy Technology Data Exchange (ETDEWEB)

    Gray, G.T. III

    1993-11-01

    Twins in most crystal structures, including advanced materials such as intermetallics, form more readily as the temperature of deformation is decreased or the rate of deformation is increased. Both parameters lead to the suppression of thermally-activated dislocation processes which can result in stresses high enough to nucleate and grow deformation twins. Under high-strain rate or shock-loading/impact conditions deformation twinning is observed to be promoted even in high stacking fault energy FCC metals and alloys, composites, and ordered intermetallics which normally do not readily deform via twinning. Under such conditions and in particular under the extreme loading rates typical of shock wave deformation the competition between slip and deformation twinning can be examined in detail. In this paper, examples of deformation twinning in the intermetallics TiAl, Ti-48Al-lV and Ni{sub 3}A as well in the cermet Al-B{sub 4}C as a function of strain rate will be presented. Discussion includes: (1) the microstructural and experimental variables influencing twin formation in these systems and twinning topics related to high-strain-rate loading, (2) the high velocity of twin formation, and (3) the influence of deformation twinning on the constitutive response of advanced materials.

  2. Deformation of Man Made Objects

    KAUST Repository

    Ibrahim, Mohamed

    2012-07-01

    We introduce a framework for 3D object deformation with primary focus on man-made objects. Our framework enables a user to deform a model while preserving its defining characteristics. Moreover, our framework enables a user to set constraints on a model to keep its most significant features intact after the deformation process. Our framework supports a semi-automatic constraint setting environment, where some constraints could be automatically set by the framework while others are left for the user to specify. Our framework has several advantages over some state of the art deformation techniques in that it enables a user to add new features to the deformed model while keeping its general look similar to the input model. In addition, our framework enables the rotation and extrusion of different parts of a model.

  3. ¿Qué es un competidor directo? Estudio para corroborar la percepción de competencia directa con base en tres factores

    OpenAIRE

    Vera Martínez Jorge; Díaz Ruíz Roberto

    2012-01-01

    En el presente trabajo se ofrece la hipótesis de que la percepción de competencia directa por parte de un líder de unidad estratégica de negocio (UEN) depende de tres variables: similitud del producto ofrecido, similitud del mercado atacado y similitud de capacidades estratégicas de las empresas competidoras. Se propone que la competencia directa depende más de la percepción de los gerentes que de una decisión basada en una regla objetiva. Estas tres variables son detectadas inicialmente en u...

  4. TrES-5: A MASSIVE JUPITER-SIZED PLANET TRANSITING A COOL G DWARF

    International Nuclear Information System (INIS)

    Mandushev, Georgi; Dunham, Edward W.; Quinn, Samuel N.; Latham, David W.; Charbonneau, David; Buchhave, Lars A.; Rabus, Markus; Oetiker, Brian; Brown, Timothy M.; Belmonte, Juan A.; O'Donovan, Francis T.

    2011-01-01

    We report the discovery of TrES-5, a massive hot Jupiter that transits the star GSC 03949-00967 every 1.48 days. From spectroscopy of the star we estimate a stellar effective temperature of T eff = 5171 ± 36 K, and from high-precision B, R, and I photometry of the transit we constrain the ratio of the semimajor axis a and the stellar radius R * to be a/R * = 6.07 ± 0.14. We compare these values to model stellar isochrones to obtain a stellar mass of M * = 0.893 ± 0.024 M ☉ . Based on this estimate and the photometric time series, we constrain the stellar radius to be R * = 0.866 ± 0.013 R ☉ and the planet radius to be R p = 1.209 ± 0.021 R J . We model our radial-velocity data assuming a circular orbit and find a planetary mass of 1.778 ± 0.063 M J . Our radial-velocity observations rule out line-bisector variations that would indicate a specious detection resulting from a blend of an eclipsing binary system. TrES-5 orbits one of the faintest stars with transiting planets found to date from the ground and demonstrates that precise photometry and followup spectroscopy are possible, albeit challenging, even for such faint stars.

  5. Valoración comparativa de las tres grandes religiones (judaímo, cristianismo, islam) /

    OpenAIRE

    Aragón Zamora, Raúl

    2013-01-01

    Se realiza una valoración comparativa de las tres grandes religiones del mundo monoteístas: cristianismo, islam y judaísmo. De gran importancia en occidente, han influido en su historia, en sus costumbres, en sus tradiciones y manera de vivir. Se analizan las diferencias que hay entre ellas y se nos muestra cómo hoy en día siguen influyendo en la vida de muchas personas.

  6. q-deformations of noncompact Lie (super-) algebras: The examples of q-deformed Lorentz, Weyl, Poincare' and (super-) conformal algebras

    International Nuclear Information System (INIS)

    Dobrev, V.K.

    1992-01-01

    We review and explain a canonical procedure for the q-deformation of the real forms G of complex Lie (super-) algebras associated with (generalized) Cartan matrices. Our procedure gives different q-deformations for the non-conjugate Cartan subalgebras of G. We give several in detail the q-deformed Lorentz and conformal (super-) algebras. The q-deformed conformal algebra contains as a subalgebra a q-deformed Poincare algebra and as Hopf subalgebras two conjugate 11-generator q-deformed Weyl algebras. The q-deformed Lorentz algebra in Hopf subalgebra of both Weyl algebras. (author). 24 refs

  7. Análisis comparativo de la estructura del canto del anuncio de tres poblaciones de Melanophryniscus rubriventris (Vellar, 1947) (Anura: Bufonidae)

    OpenAIRE

    Vaira, Marcos; Ferrari, Liliana

    2008-01-01

    La estructura de la señal acústica en anuros ha sido considerada especie-específica y utilizada incluso para el reconocimiento de nuevas especies indistinguibles por caracteres morfológicos. En este trabajo, presentamos una descripción de la estructura del canto de Melanophryniscus rubriventris y un análisis comparativo de parámetros espectrales y temporales del canto de anuncio en tres poblaciones argentinas, cada una de ellas asignadas a una de las tres subespecies tradicionalmente reconoci...

  8. Los tres "autos" del aprendizaje: aprendizaje estratégico en educación a distancia

    OpenAIRE

    Valenzuela González, Jaime R.

    2015-01-01

    1. Introducción; 2. La era de la información y la era del conocimiento; 3. Aprendizaje estratégico en Programas de Educación a Distancia; 4. Los tres "autos" del aprendizaje; 5. Hacia una taxonomía de estrategias de aprendizaje en la educación a distancia; 6. Agenda de trabajos de investigación; 7. Referencias

  9. LA AMBIENTALIZACIÓN DE LA EDUCACIÓN SUPERIOR: ESTUDIO DE CASO EN TRES INSTITUCIONES DE MEDELLÍN, COLOMBIA.

    Directory of Open Access Journals (Sweden)

    GÓMEZ CATHERINE

    2012-12-01

    Full Text Available La incorporación de una 'variable ambiental' en el quehacer universitario ha tomado fuerza desde finales del siglo XX, siendo su implementación en Colombia una realidad. Esta investigación evaluó el grado de incorporación de tal variable en procesos misionales de tres instituciones de educación superior en Medellín (Colombia. Incluyó dos niveles diferentes de formación (profesional y técnico y utilizó técnicas cualitativas (entrevistas a dos docentes por institución, visitas de una hora a dos cursos por institución y aplicación de listas de chequeo a cada visita y al análisis institucional. En los tres casos el tema ambiental hace parte de los compromisos institucionales, incluyendo sus procesos de formación, investigación, gestión y extensión. Esto se reflejó en la inclusión de la ambientalización en los currículos, el fomento a la investigación en temas ambientales, la cooperación interdisciplinaria y la adopción de políticas internas. Este trabajo identifica algunos elementos para desarrollar la educación ambiental como herramienta de comprensión integral de la sociedad y su entorno, constituye una base para discusiones, muestra el avance de las tres instituciones de estudio y descubre que existen deficiencias por cubrir.

  10. LA FRECUENCIA DEL TUTEO EN TRES ZONAS DEL DEPARTAMENTO DE ANTIOQUIA (COLOMBIA: INFLUENCIA DE LA ZONA URBANA/RURAL

    Directory of Open Access Journals (Sweden)

    Ji Son Jang

    2015-01-01

    Full Text Available En este artículo se presentan algunos resultados acerca del uso de tú en el marco de una investigación sobre la selección pronominal llevada a cabo en tres municipios del departamento colombiano de Antioquia: 1 la ciudad de Medellín, capital del departamento; 2 Carmen de Viboral, ubicada a una hora de la capital en automóvil y 3 Andes, que se sitúa a unas tres horas de la capital en coche. Los informantes comprenden edades entre 13 y 34 años. La variable social para este artículo es el lugar de residencia de los informantes: zona urbana (Medellín, medio rural (Carmen de Viboral o rural (Andes. Para llevar a cabo esta investigación se aplicó a 1490 informantes un cuestionario que mostraba distintos tipos de interacción que se dan en dichas zonas. Tres técnicas estadísticas se aplicaron a estos datos: tamaño de muestra óptimo para distribuciones multinomiales; análisis de varianza con un solo factor (ANOVA; y prueba de hipótesis para proporciones. Se encontró que, en la gran mayoría de relaciones interpersonales solidarias, el tuteo se usa más en Medellín que en Carmen de Viboral y en este último municipio más que en Andes.

  11. EVALUACIÓN DEL DESEMPEÑO HIDRAULICO DE TRES GOTEROS APLICANDO AGUA RESIDUAL DE PORCICULTURA

    Directory of Open Access Journals (Sweden)

    RAFAEL OLIVEIRA BATISTA

    2012-01-01

    Full Text Available La realización de este trabajo tuvo por objetivo, analizar el desempeño hidráulico de tres goteros aplicando agua residual de porcicultura tratada. Fue montada una estructura hidráulica de evaluación constituida de tres tipos de goteros (G1, G2 y G3. Se mantuvo la presión del servicio en el inicio de las líneas laterales en 105 kPa y se cuantificaron en intervalo de 20 h, el caudal de los goteros hasta la obtención de un tiempo total de 160 h de operación del sistema. El nivel de taponamiento de los goteros fue obtenido por medio del coeficiente de variación del caudal (CVQ. Con la aplicación de agua residual de porcicultura, hubo un aumento del CVQ a lo largo del tiempo de funcionamiento, solamente en la sub-unidad con gotero G2. Los goteros de mayor caudal e menor largura de laberinto son menos susceptibles al taponamiento. La formación de biofilme fue resultado de la interacción entre sólidos suspendidos, azufre y bacterias, consistiendo en el principal factor de taponamiento parcial y total de los goteros.

  12. On infinitesimal conformai deformations of surfaces

    Directory of Open Access Journals (Sweden)

    Юлия Степановна Федченко

    2014-11-01

    Full Text Available A new form of basic equations for conformai deformations is found. The equations involve tensor fields of displacement vector only. Conditions for trivial deformations as well as infinitesimal conformai deformations are studied.

  13. Intracrystalline deformation of calcite

    NARCIS (Netherlands)

    Bresser, J.H.P. de

    1991-01-01

    It is well established from observations on natural calcite tectonites that intracrystalline plastic mechanisms are important during the deformation of calcite rocks in nature. In this thesis, new data are presented on fundamental aspects of deformation behaviour of calcite under conditions where

  14. Deformable paper origami optoelectronic devices

    KAUST Repository

    He, Jr-Hau

    2017-01-19

    Deformable optoelectronic devices are provided, including photodetectors, photodiodes, and photovoltaic cells. The devices can be made on a variety of paper substrates, and can include a plurality of fold segments in the paper substrate creating a deformable pattern. Thin electrode layers and semiconductor nanowire layers can be attached to the substrate, creating the optoelectronic device. The devices can be highly deformable, e.g. capable of undergoing strains of 500% or more, bending angles of 25° or more, and/or twist angles of 270° or more. Methods of making the deformable optoelectronic devices and methods of using, e.g. as a photodetector, are also provided.

  15. Stochastic deformation of a thermodynamic symplectic structure

    OpenAIRE

    Kazinski, P. O.

    2008-01-01

    A stochastic deformation of a thermodynamic symplectic structure is studied. The stochastic deformation procedure is analogous to the deformation of an algebra of observables like deformation quantization, but for an imaginary deformation parameter (the Planck constant). Gauge symmetries of thermodynamics and corresponding stochastic mechanics, which describes fluctuations of a thermodynamic system, are revealed and gauge fields are introduced. A physical interpretation to the gauge transform...

  16. ecodistribution des tabanides, glossines et stomoxes le long d'un ...

    African Journals Online (AJOL)

    zinga

    humaine: sérologie IgG4 et PCR nichée. Bulletin de la Société de Pathologie. Exotique, 92: 167-170. Toure FS, Kassambara L, Williams T, Bain O,. Millet P. 1998. Human occult loasis: improvement in diagnostic sensitivity by the use of polymerase chain reaction. American Journal of Tropical Medecine and Hygiene, 59: ...

  17. Homofobia: apreciaciones desde tres perspectivas psicológicas

    Directory of Open Access Journals (Sweden)

    José Alonso Andrade-Salazar

    2016-09-01

    Full Text Available La presente investigación busca aproximarse a las causas psicosociales de la homofobia a través de una investigación cualitativa, con base al paradigma comprensivo-hermenéutico abordada desde los principios epistemológicos de tres escuelas psicológicas: psicoanálisis, humanismo y conductual. En la región latinoamericana, la homofobia es un fenómeno concebido aún como tabú, diferentes víctimas de este tipo de discriminación han recibido por parte de los victimarios agresiones de diversa índole. Estos aspectos pueden explicarse por efectos del reforzamiento de conductas por parte de la familia, grupo de pares y diversas representaciones sociales en el plano biopsicosocial. En síntesis, la homofobia es una problemática real que a la fecha perturba la salud mental y física de personas homosexuales, al provenir de un sistema en donde la homogeneidad y la “normalidad” es lo prioritario y fundamental para encajar dentro de una sociedad.

  18. Deformation aspects of time dependent fracture

    International Nuclear Information System (INIS)

    Li, C.Y.; Turner, A.P.L.; Diercks, D.R.; Laird, C.; Langdon, T.G.; Nix, W.D.; Swindeman, R.; Wolfer, W.G.; Woodford, D.A.

    1979-01-01

    For all metallic materials, particularly at elevated temperatures, deformation plays an important role in fracture. On the macro-continuum level, the inelastic deformation behavior of the material determines how stress is distributed in the body and thus determines the driving force for fracture. At the micro-continuum level, inelastic deformation alters the elastic stress singularity at the crack tip and so determines the local environment in which crack advance takes place. At the microscopic and mechanistic level, there are many possibilities for the mechanisms of deformation to be related to those for crack initiation and growth. At elevated temperatures, inelastic deformation in metallic systems is time dependent so that the distribution of stress in a body will vary with time, affecting conditions for crack initiation and propagation. Creep deformation can reduce the tendency for fracture by relaxing the stresses at geometric stress concentrations. It can also, under suitable constraints, cause a concentration of stresses at specific loading points as a result of relaxation elsewhere in the body. A combination of deformation and unequal heating, as in welding, can generate large residual stress which cannot be predicted from the external loads on the body. Acceleration of deformation by raising the temperature can be an effective way to relieve such residual stresses

  19. Quantifying the Erlenmeyer flask deformity

    Science.gov (United States)

    Carter, A; Rajan, P S; Deegan, P; Cox, T M; Bearcroft, P

    2012-01-01

    Objective Erlenmeyer flask deformity is a common radiological finding in patients with Gaucher′s disease; however, no definition of this deformity exists and the reported prevalence of the deformity varies widely. To devise an easily applied definition of this deformity, we investigated a cohort of knee radiographs in which there was consensus between three experienced radiologists as to the presence or absence of Erlenmeyer flask morphology. Methods Using the presence or absence of Erlenmeyer flask morphology as a benchmark, we measured the diameter of the femur at the level of the physeal scar and serially at defined intervals along the metadiaphysis. Results A measured ratio in excess of 0.57 between the diameter of the femoral shaft 4 cm from the physis to the diameter of the physeal baseline itself on a frontal radiograph of the knee predicted the Erlenmeyer flask deformity with 95.6% sensitivity and 100% specificity in our series of 43 independently diagnosed adults with Gaucher′s disease. Application of this method to the distal femur detected the Erlenmeyer flask deformity reproducibly and was simple to carry out. Conclusion Unlike diagnostic assignments based on subjective review, our simple procedure for identifying the modelling deformity is based on robust quantitative measurement: it should facilitate comparative studies between different groups of patients, and may allow more rigorous exploration of the pathogenesis of the complex osseous manifestations of Gaucher′s disease to be undertaken. PMID:22010032

  20. Microstructure evolution and deformation mechanism change in 0.98C-8.3Mn-0.04N steel during compressive deformation

    International Nuclear Information System (INIS)

    Wang, T.S.; Hou, R.J.; Lv, B.; Zhang, M.; Zhang, F.C.

    2007-01-01

    The microstructure evolution and the deformation mechanism change in 0.98C-8.3Mn-0.04N steel during compressive deformation at room temperature have been studied as a function of the reduction in the range of 20-60%. Experimental results show that with the reduction increasing the microstructure of the deformed sample changes from dislocation substructures into the dominant twins plus dislocations. This suggests that the plastic deformation mechanism changes from the dislocation slip to the dominant deformation twinning. The minimum reduction for deformation twins starting is estimated to be at between 30 and 40%. With the reduction further increases to more than 40%, the deformation twinning is operative and the thickness of deformation twins gradually decreases to nanoscale and shear bands occur. These high-density twins can be curved by the formation of shear bands. In addition, both transmission electron microscopy and X-ray diffraction examinations confirm the inexistence of deformation-induced martensites in these deformed samples

  1. El cronotopo de la exclusión en tres novelas de la generación del 38

    OpenAIRE

    Cristián Montes

    2008-01-01

    Se propone aquí la existencia, en tres novelas de la generación del 38, de un cronotopo deexclusión que caracteriza la representación de la ciudad. Dicho cronotopo tensiona y fracciona el propósito de integración social del discurso nacionalista.

  2. PLANTAS MEDICINALES UTILIZADAS POR TRES COMUNIDADES INDÍGENAS EN EL NOROCCIDENTE DE LA AMAZONIA (COLOMBIA

    Directory of Open Access Journals (Sweden)

    William Trujillo

    2011-01-01

    Full Text Available Usando entrevistas semiestructuradas y el índice de importancia relativa (IR, este trabajo documenta las plantas medicinales versátiles o de mayor importancia cultural en tres resguardos indígenas (emberá-katío, coreguaje y uitoto ubicadas en el piedemonte y planicie amazónica del departamento del Caquetá, Colombia. También se registran los usos medicinales y la parte de la planta más usada. En total se registraron 122 especies medicinales (94 géneros en 56 familias; Piperaceae fue la familia con el mayor número de especies (13, seguida por Gesneriaceae y Fabaceae con seis especies cada una. Solamente ocho especies fueron usadas entre dos comunidades, pero ninguna por las tres. La parte de la planta usada con mayor frecuencia en las tres comunidades fue la hoja, empleada en un total de 87 preparaciones medicinales utilizando 70 especies. Los cuatro sistemas corporales con mayor número de especies empleadas y número de tratamientos terapéuticos fueron los siguientes: enfermedades de la piel y tejidos subcutáneos, aflicciones y dolores no definidos, enfermedades infecciosas y parasitarias y enfermedades del sistema digestivo. Aproximadamente la mitad de las especies registradas son usadas para tratar fiebres, diarreas, problemas de hongos, mordeduras de serpientes, parásitos internos e inflamaciones. El 11% de las especies registradas (14 especies en 12 géneros y 12 familias fueron versátiles en relación a su uso (IR ≥ 1.0; el árbol nativo Rauvolfia leptophylla (Apocynaceae y la planta herbácea  introducida a América, Kalanchoe pinnata (Crassulaceae, tuvieron los valores de IR más altos (2.0 y 1.6. También se registran algunos síndromes de filiación cultural y se discute la importancia de estas plantas medicinales en el tratamiento de enfermedades comunes de estas comunidades con acceso limitado a centros de salud del gobierno.

  3. La integración curricular de la Alfabetización Informacional (ALFIN) en las universidades españolas: experiencias de tres modelos distintos

    OpenAIRE

    Gomes Almeida, Maria da Graça; Hernández-Pérez, Tony

    2013-01-01

    VI Encontro Ibérico EDICIC 2013 Este trabajo describe y valora cómo las competencias en información se pueden integrar en el currículo y de distintas maneras en la formación de los estudiantes universitarios y cuáles son los principales factores que influyen en este proceso. Se presenta un análisis de tres experiencias en las universidades españolas en donde la integración institucional y curricular de la ALFIN se ha realizado de forma muy distinta. Los tres modelos adoptados van dirigidos...

  4. Plastic deformation of indium nanostructures

    International Nuclear Information System (INIS)

    Lee, Gyuhyon; Kim, Ju-Young; Burek, Michael J.; Greer, Julia R.; Tsui, Ting Y.

    2011-01-01

    Highlights: → Indium nanopillars display two different deformation mechanisms. → ∼80% exhibited low flow stresses near that of bulk indium. → Low strength nanopillars have strain rate sensitivity similar to bulk indium. → ∼20% of compressed indium nanopillars deformed at nearly theoretical strengths. → Low-strength samples do not exhibit strength size effects. - Abstract: Mechanical properties and morphology of cylindrical indium nanopillars, fabricated by electron beam lithography and electroplating, are characterized in uniaxial compression. Time-dependent deformation and influence of size on nanoscale indium mechanical properties were investigated. The results show two fundamentally different deformation mechanisms which govern plasticity in these indium nanostructures. We observed that the majority of indium nanopillars deform at engineering stresses near the bulk values (Type I), with a small fraction sustaining flow stresses approaching the theoretical limit for indium (Type II). The results also show the strain rate sensitivity and flow stresses in Type I indium nanopillars are similar to bulk indium with no apparent size effects.

  5. Interactive Character Deformation Using Simplified Elastic Models

    NARCIS (Netherlands)

    Luo, Z.

    2016-01-01

    This thesis describes the results of our research into realistic skin and model deformation methods aimed at the field of character deformation and animation. The main contributions lie in the properties of our deformation scheme. Our approach preserves the volume of the deformed object while

  6. Nonlinear Deformable-body Dynamics

    CERN Document Server

    Luo, Albert C J

    2010-01-01

    "Nonlinear Deformable-body Dynamics" mainly consists in a mathematical treatise of approximate theories for thin deformable bodies, including cables, beams, rods, webs, membranes, plates, and shells. The intent of the book is to stimulate more research in the area of nonlinear deformable-body dynamics not only because of the unsolved theoretical puzzles it presents but also because of its wide spectrum of applications. For instance, the theories for soft webs and rod-reinforced soft structures can be applied to biomechanics for DNA and living tissues, and the nonlinear theory of deformable bodies, based on the Kirchhoff assumptions, is a special case discussed. This book can serve as a reference work for researchers and a textbook for senior and postgraduate students in physics, mathematics, engineering and biophysics. Dr. Albert C.J. Luo is a Professor of Mechanical Engineering at Southern Illinois University, Edwardsville, IL, USA. Professor Luo is an internationally recognized scientist in the field of non...

  7. Developing a Virtual Rock Deformation Laboratory

    Science.gov (United States)

    Zhu, W.; Ougier-simonin, A.; Lisabeth, H. P.; Banker, J. S.

    2012-12-01

    Experimental rock physics plays an important role in advancing earthquake research. Despite its importance in geophysics, reservoir engineering, waste deposits and energy resources, most geology departments in U.S. universities don't have rock deformation facilities. A virtual deformation laboratory can serve as an efficient tool to help geology students naturally and internationally learn about rock deformation. Working with computer science engineers, we built a virtual deformation laboratory that aims at fostering user interaction to facilitate classroom and outreach teaching and learning. The virtual lab is built to center around a triaxial deformation apparatus in which laboratory measurements of mechanical and transport properties such as stress, axial and radial strains, acoustic emission activities, wave velocities, and permeability are demonstrated. A student user can create her avatar to enter the virtual lab. In the virtual lab, the avatar can browse and choose among various rock samples, determine the testing conditions (pressure, temperature, strain rate, loading paths), then operate the virtual deformation machine to observe how deformation changes physical properties of rocks. Actual experimental results on the mechanical, frictional, sonic, acoustic and transport properties of different rocks at different conditions are compiled. The data acquisition system in the virtual lab is linked to the complied experimental data. Structural and microstructural images of deformed rocks are up-loaded and linked to different deformation tests. The integration of the microstructural image and the deformation data allows the student to visualize how forces reshape the structure of the rock and change the physical properties. The virtual lab is built using the Game Engine. The geological background, outstanding questions related to the geological environment, and physical and mechanical concepts associated with the problem will be illustrated on the web portal. In

  8. The Spherical Deformation Model

    DEFF Research Database (Denmark)

    Hobolth, Asgar

    2003-01-01

    Miller et al. (1994) describe a model for representing spatial objects with no obvious landmarks. Each object is represented by a global translation and a normal deformation of a sphere. The normal deformation is defined via the orthonormal spherical-harmonic basis. In this paper we analyse the s...

  9. Passive sorting of capsules by deformability

    Science.gov (United States)

    Haener, Edgar; Juel, Anne

    We study passive sorting according to deformability of liquid-filled ovalbumin-alginate capsules. We present results for two sorting geometries: a straight channel with a half-cylindrical obstruction and a pinched flow fractioning device (PFF) adapted for use with capsules. In the half-cylinder device, the capsules deform as they encounter the obstruction, and travel around the half-cylinder. The distance from the capsule's centre of mass to the surface of the half-cylinder depends on deformability, and separation between capsules of different deformability is amplified by diverging streamlines in the channel expansion downstream of the obstruction. We show experimentally that capsules can be sorted according to deformability with their downstream position depending on capillary number only, and we establish the sensitivity of the device to experimental variability. In the PFF device, particles are compressed against a wall using a strong pinching flow. We show that capsule deformation increases with the intensity of the pinching flow, but that the downstream capsule position is not set by deformation in the device. However, when using the PFF device like a T-Junction, we achieve improved sorting resolution compared to the half-cylinder device.

  10. Perceptual transparency from image deformation.

    Science.gov (United States)

    Kawabe, Takahiro; Maruya, Kazushi; Nishida, Shin'ya

    2015-08-18

    Human vision has a remarkable ability to perceive two layers at the same retinal locations, a transparent layer in front of a background surface. Critical image cues to perceptual transparency, studied extensively in the past, are changes in luminance or color that could be caused by light absorptions and reflections by the front layer, but such image changes may not be clearly visible when the front layer consists of a pure transparent material such as water. Our daily experiences with transparent materials of this kind suggest that an alternative potential cue of visual transparency is image deformations of a background pattern caused by light refraction. Although previous studies have indicated that these image deformations, at least static ones, play little role in perceptual transparency, here we show that dynamic image deformations of the background pattern, which could be produced by light refraction on a moving liquid's surface, can produce a vivid impression of a transparent liquid layer without the aid of any other visual cues as to the presence of a transparent layer. Furthermore, a transparent liquid layer perceptually emerges even from a randomly generated dynamic image deformation as long as it is similar to real liquid deformations in its spatiotemporal frequency profile. Our findings indicate that the brain can perceptually infer the presence of "invisible" transparent liquids by analyzing the spatiotemporal structure of dynamic image deformation, for which it uses a relatively simple computation that does not require high-level knowledge about the detailed physics of liquid deformation.

  11. Tres experiencias para pensar la educación en derechos humanos en Colombia

    OpenAIRE

    Rodriguez Heredia, Douglas Giovany

    2015-01-01

    A lo largo de esta investigación se analizaron comparativamente tres experiencias auto-definidas como de Educación en Derechos Humanos, a saber, una organización no gubernamental, la Escuela de Derechos Humanos de Cinep; un colegio oficial de la ciudad de Bogotá, la IED Eduardo Umaña Mendoza; y un movimiento social, el Movimiento Nacional de Víctimas de Crímenes de Estado-Capítulo Bogotá. En lo fundamental, se analizaron los procesos de constitución de cada escenario, los discursos, y las prá...

  12. Associative and Lie deformations of Poisson algebras

    OpenAIRE

    Remm, Elisabeth

    2011-01-01

    Considering a Poisson algebra as a non associative algebra satisfying the Markl-Remm identity, we study deformations of Poisson algebras as deformations of this non associative algebra. This gives a natural interpretation of deformations which preserves the underlying associative structure and we study deformations which preserve the underlying Lie algebra.

  13. Deformation Models Tracking, Animation and Applications

    CERN Document Server

    Torres, Arnau; Gómez, Javier

    2013-01-01

    The computational modelling of deformations has been actively studied for the last thirty years. This is mainly due to its large range of applications that include computer animation, medical imaging, shape estimation, face deformation as well as other parts of the human body, and object tracking. In addition, these advances have been supported by the evolution of computer processing capabilities, enabling realism in a more sophisticated way. This book encompasses relevant works of expert researchers in the field of deformation models and their applications.  The book is divided into two main parts. The first part presents recent object deformation techniques from the point of view of computer graphics and computer animation. The second part of this book presents six works that study deformations from a computer vision point of view with a common characteristic: deformations are applied in real world applications. The primary audience for this work are researchers from different multidisciplinary fields, s...

  14. Thermodynamic analysis of elastic-plastic deformation

    International Nuclear Information System (INIS)

    Lubarda, V.

    1981-01-01

    The complete set of constitutive equations which fully describes the behaviour of material in elastic-plastic deformation is derived on the basis of thermodynamic analysis of the deformation process. The analysis is done after the matrix decomposition of the deformation gradient is introduced into the structure of thermodynamics with internal state variables. The free energy function, is decomposed. Derive the expressions for the stress response, entropy and heat flux, and establish the evolution equation. Finally, we establish the thermodynamic restrictions of the deformation process. (Author) [pt

  15. SPINAL DEFORMITIES AFTER SELECTIVE DORSAL RHIZOTOMY

    Directory of Open Access Journals (Sweden)

    PATRICIO PABLO MANZONE

    Full Text Available ABSTRACT Objective: Selective dorsal rhizotomy (SDR used for spasticity treatment could worsen or develop spinal deformities. Our goal is to describe spinal deformities seen in patients with cerebral palsy (CP after being treated by SDR. Methods: Retrospective study of patients operated on (SDR between January/1999 and June/2012. Inclusion criteria: spinal Rx before SDR surgery, spinography, and assessment at follow-up. We evaluated several factors emphasizing level and type of SDR approach, spinal deformity and its treatment, final Risser, and follow-up duration. Results: We found 7 patients (6 males: mean age at SDR 7.56 years (4.08-11.16. Mean follow-up: 6.64 years (2.16-13, final age: 14.32 years (7.5-19. No patient had previous deformity. GMFCS: 2 patients level IV, 2 level III, 3 level II. Initial walking status: 2 community walkers, 2 household walkers, 2 functional walkers, 1 not ambulant, at the follow-up, 3 patients improved, and 4 kept their status. We found 4 TL/L laminotomies, 2 L/LS laminectomies, and 1 thoracic laminectomy. Six spinal deformities were observed: 2 sagittal, 3 mixed, and 1 scoliosis. There was no association among the type of deformity, final gait status, topographic type, GMFCS, age, or SDR approach. Three patients had surgery indication for spinal deformity at skeletal maturity, while those patients with smaller deformities were still immature (Risser 0 to 2/3 although with progressive curves. Conclusions: After SDR, patients should be periodically evaluated until they reach Risser 5. The development of a deformity does not compromise functional results but adds morbidity because it may require surgical treatment.

  16. Nd-Fe-B-Cu hot deformation processing: a comparison of deformation modes, microstructural development and magnetic properties

    International Nuclear Information System (INIS)

    Ferrante, M.; Sinka, V.; Assis, O.B.G.; Oliveira, I. de; Freitas, E. de

    1996-01-01

    Due to its relative simplicity and low cost the hot deformation of Nd-Fe-B ingots is rapidly reaching the status of a valid alternative to sintering. Among the possible deformation modes, pressing, rolling and forging are perhaps the most successful. This paper describes the research programme undertaken so far, by discussing the relationship between deformation mode, microstructure and magnetic properties of magnets produced by hot deformation mode, microstructure and magnetic properties of magnets produced by hot deformation of a number of Nd-fe-B-Cu alloys. Microstructural observation showed that both pressed and forged samples are characterized by a heterogeneous microstructure and from magnetic measurements it was concluded that magnetic properties differ when taken in the center or in the periphery of the sample. On the other hand roller magnets were homogeneous both in terms of microstructure and magnetic properties, and interpretations of the mechanisms of texture development and of microstructural development of hot deformed magnets is put forward. (author)

  17. Costos y rendimientos de producción de tres néctares de manzana (pyrusmalusl variedades Anna, Pensilvania y Winter

    Directory of Open Access Journals (Sweden)

    Darío Alberto Pinto Medina

    2016-12-01

    Full Text Available La agroindustria en Colombia se muestra como una alternativa para dar aprovechamiento eficiente a materias primas de origen agropecuario, especialmente aquellas que por parámetros de calidad, no salen al mercado y generan cuantiosas pérdidas a agricultores y ganaderos; esta investigación se basó principalmente en el aprovechamiento de la manzana (Pyrus malus L, se elaboró néctar con tres variedades producidas en el departamento de Boyacá, Colombia: Pensilvania, Anna y Winter y se evaluaron los rendimientos en extracción de pulpa, con pérdidas del 18,4% para Pensilvania 21,4%, para Anna y 30%en Winter. Se realizaron pruebas sensoriales para determinar el grado de aceptabilidad de los tres productos, observándose diferencias significativas en textura, y similitud en parámetros como olor, color y sabor; para dicho análisis se compararon las tres variedades con un néctar comercial. Se concluye que el costo de producción unitario para 900 ml de néctar de la variedad Pensilvania es de $4.999, Anna $5.100 y Winter $5.296 (pesos colombianos, esto se debe a mejores rendimientos en extracción de pulpa para la variedad Pensilvania, mostrando que los productos son competitivos en precio y calidad.

  18. Volcanic deformation in the Andes

    Science.gov (United States)

    Riddick, S.; Fournier, T.; Pritchard, M.

    2009-05-01

    We present the results from an InSAR survey of volcanic activity in South America. We use data from the Japanese Space Agency's ALOS L-band radar satellite from 2006-2009. The L-band instrument provides better coherence in densely vegetated regions, compared to the shorter wave length C-band data. The survey reveals volcano related deformation in regions, north, central and southern, of the Andes volcanic arc. Since observations are limited to the austral summer, comprehensive coverage of all volcanoes is not possible. Yet, our combined observations reveal volcanic/hydrothermal deformation at Lonquimay, Llaima, Laguna del Maule, and Chaitén volcanoes, extend deformation measurements at Copahue, and illustrate temporal complexity to the previously described deformation at Cerro Hudson and Cordón Caulle. No precursory deformation is apparent before the large Chaitén eruption (VEI_5) of 2 May 2008, (at least before 16 April) suggesting rapid magma movement from depth at this long dormant volcano. Subsidence at Ticsani Volcano occurred coincident with an earthquake swarm in the same region.

  19. Static response of deformable microchannels

    Science.gov (United States)

    Christov, Ivan C.; Sidhore, Tanmay C.

    2017-11-01

    Microfluidic channels manufactured from PDMS are a key component of lab-on-a-chip devices. Experimentally, rectangular microchannels are found to deform into a non-rectangular cross-section due to fluid-structure interactions. Deformation affects the flow profile, which results in a nonlinear relationship between the volumetric flow rate and the pressure drop. We develop a framework, within the lubrication approximation (l >> w >> h), to self-consistently derive flow rate-pressure drop relations. Emphasis is placed on handling different types of elastic response: from pure plate-bending, to half-space deformation, to membrane stretching. The ``simplest'' model (Stokes flow in a 3D rectangular channel capped with a linearly elastic Kirchhoff-Love plate) agrees well with recent experiments. We also simulate the static response of such microfluidic channels under laminar flow conditions using ANSYSWorkbench. Simulations are calibrated using experimental flow rate-pressure drop data from the literature. The simulations provide highly resolved deformation profiles, which are difficult to measure experimentally. By comparing simulations, experiments and our theoretical models, we show good agreement in many flow/deformation regimes, without any fitting parameters.

  20. IMP Supersite vs Pico de Tres Padres: The first few hours of mixing and oxidation during the MCMA-2006/MILAGRO Campaign

    Science.gov (United States)

    Herndon, S.; Onasch, T.; Wood, E.; Knighton, B.; Zavala, M.; Mazzoleni, C.; Thornhill, D.; Marr, L.; Kolb, C.; Molina, L. T.

    2007-05-01

    The Aerodyne Research, Inc. (ARI) mobile laboratory was deployed in the Mexico City Metropolitan Area (MCMA) for the full month of March 2006 to support the MCMA-2006/MAX-Mex/MILAGRO research project activities, in collaboration with other MCMA-2006 research groups (see information on MCMA-2006/MILAGRO posted at http:www.mce2.org). The ratios of various volatile organic compounds (VOCs) to combustion tracer species such as CO and CO2 are compared at one of the supersites (T0) and Pico de Tres Padres. T0 (located at the Mexican Petroleum Institute, IMP) is heavily influenced by various emission sources in the local area, predominantly roadway traffic. Pico de Tres Padres is an isolated, privately owned mountain located within the Mexico City Metropolitan Area (MCMA). It rises 1000 m above the MCMA basin floor and is located about halfway between T0 and T1. The airmasses analyzed at Pico de Tres Padres seem to be mixed urban emissions absent of high frequency spikes of CO, NO or CO2. Relationships between VOCs, and combustion tracers will be used to gain a crude understanding of the initial photochemical processing of the urban emissions. How the initial photochemical processing of Mexico City's air may relate to secondary aerosol production is also explored.

  1. Versal deformation of the Lie algebra L_2

    NARCIS (Netherlands)

    Post, Gerhard F.; Fialowski, Alice

    2001-01-01

    We investigate deformations of the infinite-dimensional vector-field Lie algebra spanned by the fields ei = zi + 1d/dz, where i ≥ 2. The goal is to describe the base of a “versal” deformation; such a versal deformation induces all the other nonequivalent deformations and solves the deformation

  2. Tres veces en la plaza: Escenificación de una ceremonia estatal de perdón público por actos de violencia paramilitar en Colombia

    Directory of Open Access Journals (Sweden)

    Gabriel Ruiz Romero

    2017-01-01

    Full Text Available Los actos de violencia armada tienen la capacidad de resignificar los espacios alrededor de los cuales una comunidad ha construido su identidad social. En el pequeño poblado palafito de Nueva Venecia (Magdalena-Colombia, tres distintos actores armados (la guerrilla, los paramilitares de extrema derecha y la fuerza pública colombiana convocaron a la población, en tres distintos momentos, en el mismo espacio social: la plaza principal del pueblo. En la primera reunión, el primer grupo advirtió sobre la posibilidad de una masacre; en la segunda, los pobladores fueron víctimas y testigos de la forma en que el segundo grupo la ejecutaba; y en la tercera reunión, el tercer grupo ofrecía excusas por lo sucedido. El artículo analiza la forma en que estos tres actos determinaron tres marcas del continuum de la violencia sobre ese espacio nodal de memoria. El texto está organizado narrativamente alrededor del último de estos actos, cuando representantes del ejército y la policía colombianas ofician una ceremonia pública de perdón por la masacre paramilitar. El análisis de dicha ceremonia la revela más como un escenario donde los agentes de memorias enfrentadas despliegan dispositivos discursivos para legitimarse socialmente como un verdadero acto de reparación simbólica.

  3. Quantification and validation of soft tissue deformation

    DEFF Research Database (Denmark)

    Mosbech, Thomas Hammershaimb; Ersbøll, Bjarne Kjær; Christensen, Lars Bager

    2009-01-01

    We present a model for soft tissue deformation derived empirically from 10 pig carcases. The carcasses are subjected to deformation from a known single source of pressure located at the skin surface, and the deformation is quantified by means of steel markers injected into the tissue. The steel...... markers are easy to distinguish from the surrounding soft tissue in 3D computed tomography images. By tracking corresponding markers using methods from point-based registration, we are able to accurately quantify the magnitude and propagation of the induced deformation. The deformation is parameterised...

  4. Physics-based deformable organisms for medical image analysis

    Science.gov (United States)

    Hamarneh, Ghassan; McIntosh, Chris

    2005-04-01

    Previously, "Deformable organisms" were introduced as a novel paradigm for medical image analysis that uses artificial life modelling concepts. Deformable organisms were designed to complement the classical bottom-up deformable models methodologies (geometrical and physical layers), with top-down intelligent deformation control mechanisms (behavioral and cognitive layers). However, a true physical layer was absent and in order to complete medical image segmentation tasks, deformable organisms relied on pure geometry-based shape deformations guided by sensory data, prior structural knowledge, and expert-generated schedules of behaviors. In this paper we introduce the use of physics-based shape deformations within the deformable organisms framework yielding additional robustness by allowing intuitive real-time user guidance and interaction when necessary. We present the results of applying our physics-based deformable organisms, with an underlying dynamic spring-mass mesh model, to segmenting and labelling the corpus callosum in 2D midsagittal magnetic resonance images.

  5. A novel methodology for 3D deformable dosimetry.

    Science.gov (United States)

    Yeo, U J; Taylor, M L; Dunn, L; Kron, T; Smith, R L; Franich, R D

    2012-04-01

    Interfraction and intrafraction variation in anatomic structures is a significant challenge in contemporary radiotherapy. The objective of this work is to develop a novel tool for deformable structure dosimetry, using a tissue-equivalent deformable gel dosimeter that can reproducibly simulate targets subject to deformation. This will enable direct measurement of integrated doses delivered in different deformation states, and the verification of dose deforming algorithms. A modified version of the nPAG polymer gel has been used as a deformable 3D dosimeter and phantom to investigate doses delivered to deforming tissue-equivalent geometry. The deformable gel (DEFGEL) dosimeter/phantom is comprised of polymer gel in a latex membrane, moulded (in this case) into a cylindrical geometry, and deformed with an acrylic compressor. Fifteen aluminium fiducial markers (FM) were implanted into DEFGEL phantoms and the reproducibility of deformation was determined via multiple computed tomography (CT) scans in deformed and nondeformed states before and after multiple (up to 150) deformations. Dose was delivered to the DEFGEL phantom in three arrangements: (i) without deformation, (ii) with deformation, and (iii) cumulative exposures with and without deformation, i.e., dose integration. Irradiations included both square field and a stereotactic multiple dynamic arc treatment adapted from a patient plan. Doses delivered to the DEFGEL phantom were read out using cone beam optical CT. Reproducibility was verified by observation of interscan shifts of FM locations (as determined via CT), measured from an absolute reference point and in terms of inter-FM distance. The majority (76%) of points exhibited zero shift, with others shifting by one pixel size consistent with setup error as confirmed with a control sample. Comparison of dose profiles and 2D isodose distributions from the three arrangements illustrated complex spatial redistribution of dose in all three dimensions occurring as

  6. A novel methodology for 3D deformable dosimetry

    International Nuclear Information System (INIS)

    Yeo, U. J.; Taylor, M. L.; Dunn, L.; Kron, T.; Smith, R. L.; Franich, R. D.

    2012-01-01

    Purpose: Interfraction and intrafraction variation in anatomic structures is a significant challenge in contemporary radiotherapy. The objective of this work is to develop a novel tool for deformable structure dosimetry, using a tissue-equivalent deformable gel dosimeter that can reproducibly simulate targets subject to deformation. This will enable direct measurement of integrated doses delivered in different deformation states, and the verification of dose deforming algorithms. Methods: A modified version of the nPAG polymer gel has been used as a deformable 3D dosimeter and phantom to investigate doses delivered to deforming tissue-equivalent geometry. The deformable gel (DEFGEL) dosimeter/phantom is comprised of polymer gel in a latex membrane, moulded (in this case) into a cylindrical geometry, and deformed with an acrylic compressor. Fifteen aluminium fiducial markers (FM) were implanted into DEFGEL phantoms and the reproducibility of deformation was determined via multiple computed tomography (CT) scans in deformed and nondeformed states before and after multiple (up to 150) deformations. Dose was delivered to the DEFGEL phantom in three arrangements: (i) without deformation, (ii) with deformation, and (iii) cumulative exposures with and without deformation, i.e., dose integration. Irradiations included both square field and a stereotactic multiple dynamic arc treatment adapted from a patient plan. Doses delivered to the DEFGEL phantom were read out using cone beam optical CT. Results: Reproducibility was verified by observation of interscan shifts of FM locations (as determined via CT), measured from an absolute reference point and in terms of inter-FM distance. The majority (76%) of points exhibited zero shift, with others shifting by one pixel size consistent with setup error as confirmed with a control sample. Comparison of dose profiles and 2D isodose distributions from the three arrangements illustrated complex spatial redistribution of dose in all

  7. Análisis comparativo de la situación actual de los puertos secos en tres contextos diferentes: Colombia, México, España

    OpenAIRE

    Rozo Alvarado, Jonathan Efrain

    2013-01-01

    El presente trabajo tiene como finalidad analizar y comparar Puertos Secos en tres países diferentes: Colombia, México y España; y con ello determinar las claves o herramientas para el éxito de estos. Para esto, la investigación se llevó a cabo a nivel documental y teórico, abarcando desde documentos de investigación académicos y de entidades supranacionales, hasta documentos de carácter legislativo de diferente orden, para los tres países de estudio, incluyendo estudios privados y herramient...

  8. M theory on deformed superspace

    Science.gov (United States)

    Faizal, Mir

    2011-11-01

    In this paper we will analyze a noncommutative deformation of the Aharony-Bergman-Jafferis-Maldacena (ABJM) theory in N=1 superspace formalism. We will then analyze the Becchi-Rouet-Stora-Tyutin (BRST) and anti-BRST symmetries for this deformed ABJM theory, and its linear as well as nonlinear gauges. We will show that the sum of the gauge fixing term and the ghost term for this deformed ABJM theory can be expressed as a combination of the total BRST and the total anti-BRST variation, in Landau and nonlinear gauges. We will show that in Landau and Curci-Ferrari gauges deformed ABJM theory is invariant under an additional set of symmetry transformations. We will also discuss the effect that the addition of a bare mass term has on this theory.

  9. 2678-IJBCS-Article-Abla Dela Mondedji

    African Journals Online (AJOL)

    hp

    l'envahissement de la flore forestière togolaise par les espèces végétales exotiques : cas du neem (Azadirachta indica). Mémoire de D.E.A., Université de Lomé, 61p. Kranthi KR, Jadhav D, Wanjari R, Kranrhi S,. Russel D. 2001. Pyrethroid resistance and mechanisms of resistance in field strains of Helicoverpa armigera.

  10. ÉTUDE DE CAS — Chine : Lier agriculteurs et chercheurs en Chine ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    5 janv. 2011 ... L'élément clé : le renforcement des systèmes locaux d'amélioration des semences. Trop souvent, les agriculteurs et les chercheurs travaillent dans des mondes différents. Les chercheurs produisent des variétés hybrides exotiques en laboratoire qui ne réussissent que parce qu'elles vivent dans des ...

  11. Sonoluminescence et fusion nucléaire

    NARCIS (Netherlands)

    Hilgenfeldt, Sascha; Lohse, Detlef

    2002-01-01

    Curiosité de laboratoire, la sonoluminescence, production de lumière dans une bulle de gaz comprimée par des ultrasons, a suscité depuis une douzaine d'années les théories les plus exotiques. Des expériences très précises et la conjugaison de connaissances provenant de différents domaines de la

  12. Determinación en túnel aerodinámico de las cargas de viento sobre tres marquesinas

    Directory of Open Access Journals (Sweden)

    Blanco, Pedro Juan

    1981-12-01

    Full Text Available Not available.

    Las marquesinas de las graderías de los estadios son estructuras sometidas básicamente a tres tipos de cargas: las debidas a su propio peso, las debidas a la nieve y las debidas a la acción del viento. La determinación de las dos primeras es relativamente sencilla y no expuesta a error; sin embargo, la determinación de las cargas producidas por la acción del viento es prácticamente inabordable por métodos teóricos y muy propensa a error si se hace por métodos simplificados, por lo que resulta casi imprescindible recurrir a su determinación práctica mediante ensayos en modelos a escala en túnel aerodinámico. Este trabajo presenta los resultados obtenidos en cuatro ensayos en modelo de tres marquesinas distintas, comparándolos con la estimación que se hubiera realizado si se hubiera atendido a los métodos simplificados de las normas en vigor.

  13. El cristiano Joan Maragall: tres artículos sobre la semana trágica

    Directory of Open Access Journals (Sweden)

    Raguer i Suñer, Hilari

    2013-06-01

    Full Text Available Between 19 and 25 July 1909 in Barcelona blew a popular movement of protest against the mobilization of reservists sent to Morocco. The subversion coated a distinctly anticlerical, with many churches and convents burned and were killed three priests. Joan Maragall wrote three articles disagreeing from the harsh crackdown of the government, backed by the general opinion. In first article Maragall censured the Catalan bourgeoisie by his little love for the poor. In the second asked that no longer apply the death penalty, but not published it. In the third and most famous explained his experience of a Mass celebrated in a church burned by the revolutionaries, which was what the Church should be, free of state protection and of the rich, and celebrated in the language of people. This article shocked the bourgeoisie.Entre el 19 y el 25 de julio de 1909 estalló en Barcelona un movimiento popular de protesta contra la movilización de reservistas enviados a Marruecos. La subversión revistió un carácter marcadamente anticlerical, con muchos incendios de iglesias y conventos y tres sacerdotes asesinados. Joan Maragall escribió tres artículos disintiendo de la dura represión del gobierno, respaldado por la opinión general. En un primer artículo Maragall acusaba a la burguesía catalana de falta de amor a los pobres. En el segundo pedía que no se aplicaran más penas de muerte, pero no se lo publicaron. En el tercero y más famoso explicaba su experiencia de una misa celebrada en una iglesia quemada por los revolucionarios, en la que vio lo que debería ser la Iglesia, libre de la protección del estado y de los ricos, y la misa en la lengua del pueblo. Este artículo causó gran escándalo entre la burguesía de Barcelona. [ct] Entre el 19 i el 25 juliol 1909 va esclatar a Barcelona un moviment popular de protesta contra la mobilització de reservistes enviats al Marroc. La subversió revestí un caràcter marcadament anticlerical, amb molts

  14. Microstructure of AZ31 Magnesium Alloy deformed by indentation-flattening compound deformation technology

    Science.gov (United States)

    Wang, Minghao; Wang, Zhongtang; Yu, Xiaolin

    2018-03-01

    Characteristic of indentation-flattening compound deformation technology (IFCDT) is discussed, and the parameters of IFCDT are defined. Performance of magnesium alloy AZ31 sheet deformed by IFCDT is researched. The effect of IFCDT coefficient, temperature and reduction ratio on the microstructure of magnesium alloy sheet is analyzed. The research results show that the volume fraction of the twin crystal decreases gradually and the average grain size increases with increasing of coefficient of IFCDT. With increase of the reduction ratio, the volume fraction of the twin crystal gradually increases, and the average grain size also increases. With increase of deformation temperature, the volume fraction of the twin crystal decreases gradually, and the twin crystal grain size increases.

  15. Origami-enabled deformable silicon solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Rui; Huang, Hai; Liang, Hanshuang; Liang, Mengbing [School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, Arizona 85287 (United States); Tu, Hongen; Xu, Yong [Electrical and Computer Engineering, Wayne State University, 5050 Anthony Wayne Dr., Detroit, Michigan 48202 (United States); Song, Zeming; Jiang, Hanqing, E-mail: hanqing.jiang@asu.edu [School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, Arizona 85287 (United States); Yu, Hongyu, E-mail: hongyu.yu@asu.edu [School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, Arizona 85287 (United States); School of Earth and Space Exploration, Arizona State University, Tempe, Arizona 85287 (United States)

    2014-02-24

    Deformable electronics have found various applications and elastomeric materials have been widely used to reach flexibility and stretchability. In this Letter, we report an alternative approach to enable deformability through origami. In this approach, the deformability is achieved through folding and unfolding at the creases while the functional devices do not experience strain. We have demonstrated an example of origami-enabled silicon solar cells and showed that this solar cell can reach up to 644% areal compactness while maintaining reasonable good performance upon cyclic folding/unfolding. This approach opens an alternative direction of producing flexible, stretchable, and deformable electronics.

  16. Origami-enabled deformable silicon solar cells

    International Nuclear Information System (INIS)

    Tang, Rui; Huang, Hai; Liang, Hanshuang; Liang, Mengbing; Tu, Hongen; Xu, Yong; Song, Zeming; Jiang, Hanqing; Yu, Hongyu

    2014-01-01

    Deformable electronics have found various applications and elastomeric materials have been widely used to reach flexibility and stretchability. In this Letter, we report an alternative approach to enable deformability through origami. In this approach, the deformability is achieved through folding and unfolding at the creases while the functional devices do not experience strain. We have demonstrated an example of origami-enabled silicon solar cells and showed that this solar cell can reach up to 644% areal compactness while maintaining reasonable good performance upon cyclic folding/unfolding. This approach opens an alternative direction of producing flexible, stretchable, and deformable electronics

  17. Microstructural evolution during tensile deformation of polypropylenes

    International Nuclear Information System (INIS)

    Dasari, A.; Rohrmann, J.; Misra, R.D.K.

    2003-01-01

    Tensile deformation processes occurring at varying strain rates in high and low crystallinity polypropylenes and ethylene-propylene di-block copolymers have been investigated by scanning electron microscopy. This is examined for both long and short chain polymeric materials. The deformation processes in different polymeric materials show striking dissimilarities in spite of the common propylene matrix. Additionally, the deformation behavior of long and their respective short chain polymers was different. Deformation mechanisms include crazing/tearing, wedging, ductile ploughing, fibrillation, and brittle fracture. The different modes of deformation are depicted in the form of strain rate-strain diagrams. At a constant strain rate, the strain to fracture follows the sequence: high crystallinity polypropylenes< low crystallinity polypropylenes< ethylene-propylene di-block copolymers, indicative of the trend in resistance to plastic deformation

  18. Desarrollo de la competencia lectora de textos científicos en tres etapas de formación universitaria. Estudio de campo

    Directory of Open Access Journals (Sweden)

    Iraís Hernández Suárez

    2009-07-01

    Full Text Available Este artículo pretende dar cuenta del proceso de transformación de estudiantes universitarios de biología de la Universidad Veracruzana, México, en el desarrollo de habilidades para leer textos académicos disciplinarios. El estudio empírico consiste en un análisis de los resúmenes producto de la lectura de tres textos (artículo científico, libro de texto y manual de prácticas de laboratorio escritos por jóvenes de tres niveles de formación (principiantes, intermedios y avanzados. Los resultados muestran una clara tendencia, a medida que avanzan en la formación universitaria, hacia el desarrollo de habilidades específicas para la lectura de textos especializados.

  19. Effect of deformation ratios on grain alignment and magnetic properties of hot pressing/hot deformation Nd-Fe-B magnets

    Science.gov (United States)

    Guo, Zhaohui; Li, Mengyu; Wang, Junming; Jing, Zheng; Yue, Ming; Zhu, Minggang; Li, Wei

    2018-05-01

    The magnetic properties, microstructure and orientation degrees of hot pressing magnet and hot deformation Nd-Fe-B magnets with different deformation ratios have been investigated in this paper. The remanence (Br) and maximum magnetic energy product ((BH)max) were enhanced gradually with the deformation ratio increasing from 0% to 70%, whereas the coercivity (HCj) decreased. The scanning electron microscopy (SEM) images of fractured surfaces parallel to the pressure direction during hot deformation show that the grains tend to extend perpendicularly to the c-axes of Nd2Fe14B grains under the pressure, and the aspect ratios of the grains increase with the increase of deformation ratio. Besides, the compression stress induces the long axis of grains to rotate and the angle (θ) between c-axis and pressure direction decreases. The X-ray diffraction (XRD) patterns reveal that orientation degree improves with the increase of deformation ratio, agreeing well with the SEM results. The hot deformation magnet with a deformation ratio of 70% has the best Br and (BH)max, and the magnetic properties are as followed: Br=1.40 T, HCj=10.73 kOe, (BH)max=42.30 MGOe.

  20. Anisotropic Ripple Deformation in Phosphorene.

    Science.gov (United States)

    Kou, Liangzhi; Ma, Yandong; Smith, Sean C; Chen, Changfeng

    2015-05-07

    Two-dimensional materials tend to become crumpled according to the Mermin-Wagner theorem, and the resulting ripple deformation may significantly influence electronic properties as observed in graphene and MoS2. Here, we unveil by first-principles calculations a new, highly anisotropic ripple pattern in phosphorene, a monolayer black phosphorus, where compression-induced ripple deformation occurs only along the zigzag direction in the strain range up to 10%, but not the armchair direction. This direction-selective ripple deformation mode in phosphorene stems from its puckered structure with coupled hinge-like bonding configurations and the resulting anisotropic Poisson ratio. We also construct an analytical model using classical elasticity theory for ripple deformation in phosphorene under arbitrary strain. The present results offer new insights into the mechanisms governing the structural and electronic properties of phosphorene crucial to its device applications.

  1. ¿Qué es un competidor directo? Estudio para corroborar la percepción de competencia directa con base en tres factores

    Directory of Open Access Journals (Sweden)

    Jorge Vera Martínez

    2012-01-01

    Full Text Available En el presente trabajo se ofrece la hipótesis de que la percepción de competencia directa por parte de un líder de unidad estratégica de negocio (UEN depende de tres variables: similitud del producto ofrecido, similitud del mercado atacado y similitud de capacidades estratégicas de las empresas competidoras. Se propone que la competencia directa depende más de la percepción de los gerentes que de una decisión basada en una regla objetiva. Estas tres variables son detectadas inicialmente en una revisión de literatura y son corroboradas mediante un estudio cualitativo donde se entrevistó a líderes de UEN. La relación entre estas tres variables y la percepción de competencia directa se corrobora mediante una prueba empírica donde se aplican cuestionarios -también a líderes de UEN- que sirvieron para medir la relación entre tales variables. El presente trabajo se enmarca en la noción de grupos estratégicos; se parte de que los integrantes de uno tenderían a percibirse como competidores directos y que esta percepción de competencia directa podría ser un factor para conformar tales grupos. Los resultados arrojan que la percepción de competencia directa sí es dependiente de cada una de las tres variables de similitud. Se hace un análisis estadístico de dos tipos: uno basado en correlaciones tomando la percepción de competencia directa como una variable ordinal y otro en chi-cuadrada y tablas de contingencia tomando la dependiente como una variable dicotómica: la de competencia más directa versus la de competencia menos directa.

  2. Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites

    International Nuclear Information System (INIS)

    An, X. H.; Cao, Y.; Liao, X. Z.; Zhu, S. M.; Nie, J. F.; Kawasaki, M.; Ringer, S. P.; Langdon, T. G.; Zhu, Y. T.

    2015-01-01

    We report an atomic-scale investigation of interface-facilitated deformation twinning behaviour in Ag-Cu nanolamellar composites. Profuse twinning activities in Ag supply partial dislocations to directly transmit across the Ag-Cu lamellar interface that promotes deformation twinning in the neighbouring Cu lamellae although the interface is severely deformed. The trans-interface twin bands change the local structure at the interface. Our analysis suggests that the orientation relationship and interfacial structure between neighbouring Ag-Cu lamellae play a crucial role in such special interface-facilitated twinning behaviour

  3. Transmission spectroscopy of the hot Jupiter TrES-3 b: Disproof of an overly large Rayleigh-like feature

    Science.gov (United States)

    Mackebrandt, F.; Mallonn, M.; Ohlert, J. M.; Granzer, T.; Lalitha, S.; García Muñoz, A.; Gibson, N. P.; Lee, J. W.; Sozzetti, A.; Turner, J. D.; Vaňko, M.; Strassmeier, K. G.

    2017-12-01

    Context. Transit events of extrasolar planets offer the opportunity to study the composition of their atmospheres. Previous work on transmission spectroscopy of the close-in gas giant (TrES)-3 b revealed an increase in absorption towards blue wavelengths of very large amplitude in terms of atmospheric pressure scale heights, too large to be explained by Rayleigh-scattering in the planetary atmosphere. Aims: We present a follow-up study of the optical transmission spectrum of the hot Jupiter TrES-3 b to investigate the strong increase in opacity towards short wavelengths found by a previous study. Furthermore, we aim to estimate the effect of stellar spots on the transmission spectrum. Methods: This work uses previously published long slit spectroscopy transit data of the Gran Telescopio Canarias (GTC) and published broad band observations as well as new observations in different bands from the near-UV to the near-IR, for a homogeneous transit light curve analysis. Additionally, a long-term photometric monitoring of the TrES-3 host star was performed. Results: Our newly analysed GTC spectroscopic transit observations show a slope of much lower amplitude than previous studies. We conclude from our results the previously reported increasing signal towards short wavelengths is not intrinsic to the TrES-3 system. Furthermore, the broad band spectrum favours a flat spectrum. Long-term photometric monitoring rules out a significant modification of the transmission spectrum by unocculted star spots. Based on (1) data obtained with the STELLA robotic telescopes in Tenerife, an AIP facility jointly operated by AIP and IAC, (2) observations collected at the German-Spanish Astronomical Center, Calar Alto, jointly operated by the Max-Planck-Institut für Astronomie Heidelberg and the Instituto de Astrofísica de Andalucía (CSIC) and (3) observations made with the Italian Telescopio Nazionale Galileo (TNG) operated on the island of La Palma by the Fundación Galileo Galilei of

  4. Los tientos 68, 65 y 67 de Obras de música: Estudio analítico de tres obras maestras de Cabezón

    Directory of Open Access Journals (Sweden)

    Roig-Francolí, Miguel A.

    2014-12-01

    Full Text Available The present study focuses on three tientos which can undoubtedly be counted among Cabezón’s masterpieces, numbers 68, 65, an 67 from Obras de música. This particular order allows an analytical journey from a long and brilliant tiento with great modal unity, to a short and introspective piece that includes three sections, each of which is in a different mode, by way of a mid-length tiento featuring structural ambiguity between two modes. Cabezón’s tonal world (as well as his time’s is represented in these three tientos in all its richness and variety. We consider three aspects in each of these tientos: Formal organization, thematic coherence and motivic relationships among different subjects, and modal organization. Far from being three isolated features within the musical process, we will see that these three elements are closely related in these works by Cabezón, and together they constitute and determine the compositional structures that define these tientos as masterpieces.El presente estudio se centra en tres tientos que sin duda pueden contarse entre las obras maestras de Cabezón: los números 68, 65 y 67 de Obras de música. Este orden en particular nos permite viajar analíticamente desde un tiento largo y brillante con gran unidad modal, hasta un tiento corto e introspectivo que sin embargo incluye tres secciones, cada una de las cuales está en un modo distinto, pasando por un tiento de longitud mediana que demuestra ambigüedad estructural entre dos modos. El mundo tonal de Cabezón (y también de su tiempo se encuentra representado en estos tres tientos en toda su riqueza y variedad. Abordamos tres aspectos de cada uno de estos tientos: organización formal, coherencia temática y relationes motívicas entre diversos sujetos, y organización modal. Lejos de ser aspectos aislados dentro del proceso musical, veremos que estos tres elementos están íntimamente relacionados en estas obras de Cabezón, y juntos constituyen y

  5. Transición nutricional en tres ciudades con diferente complejidad urbano ambiental

    Directory of Open Access Journals (Sweden)

    Oyhenart, Evelia Edith

    2005-01-01

    Full Text Available El objetivo del presente trabajo consiste en analizar el estado nutricional en niños residentes en tres ciudades argentinas con diferente complejidad urbano ambiental, en el contexto de la transición nutricional. Se realizó un estudio antropométrico transversal sobre una muestra de 5190 niños de ambos sexos de 4.0 a 14.9 años que asisten a escuelas públicas de las ciudades de La Plata y Brandsen (Provincia de Buenos Aires y General Alvear (Provincia de Mendoza. Se relevaron peso corporal y talla y se calculó el índice de masa corporal (IMC. Los datos fueron estandarizados a puntaje z empleando NHANES I y II. Se utilizó -2DS para determinar bajo peso para la edad, baja talla para la edad y bajo peso para la talla. Los valores de IMC mayores al percentilo 85 y menores o iguales al percentilo 95 definieron sobrepeso, mientras que los mayores al percentilo 95 obesidad. Las prevalencias para cada indicador fueron comparadas mediante pruebas de Chi2. El procesamiento de los datos se realizó mediante el programa SPSS 7.5. Los resultados obtenidos confirman lo hallado en otras poblaciones latinoamericanas, caracterizadas por un predominio de retraso lineal de crecimiento y bajos niveles de emaciación. Las tres ciudades presentaron coexistencia de desnutrición y obesidad. No obstante, las diferencias halladas sugieren distintos estadios de transición nutricional: La Plata y Brandsen se ubicarían en un estadio más avanzado, con altas prevalencias de desnutrición y obesidad, mientras que General Alvear reflejaría un estadio menos avanzado de dicha transición.

  6. Deformation of wrought uranium: Experiments and modeling

    Energy Technology Data Exchange (ETDEWEB)

    McCabe, R.J., E-mail: rmccabe@lanl.gov [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Capolungo, L. [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)] [UMI 2958 Georgia Tech - CNRS, 57070 Metz (France); Marshall, P.E.; Cady, C.M.; Tome, C.N. [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2010-09-15

    The room temperature deformation behavior of wrought polycrystalline uranium is studied using a combination of experimental techniques and polycrystal modeling. Electron backscatter diffraction is used to analyze the primary deformation twinning modes for wrought alpha-uranium. The {l_brace}1 3 0{r_brace}<3 1 0> twinning mode is found to be the most prominent twinning mode, with minor contributions from the '{l_brace}1 7 2{r_brace}'<3 1 2> and {l_brace}1 1 2{r_brace}'<3 7 2>' twin modes. Because of the large number of deformation modes, each with limited deformation systems, a polycrystalline model is employed to identify and quantify the activity of each mode. Model predictions of the deformation behavior and texture development agree reasonably well with experimental measures and provide reliable information about deformation systems.

  7. Nonlinear continuum mechanics and large inelastic deformations

    CERN Document Server

    Dimitrienko, Yuriy I

    2010-01-01

    This book provides a rigorous axiomatic approach to continuum mechanics under large deformation. In addition to the classical nonlinear continuum mechanics - kinematics, fundamental laws, the theory of functions having jump discontinuities across singular surfaces, etc. - the book presents the theory of co-rotational derivatives, dynamic deformation compatibility equations, and the principles of material indifference and symmetry, all in systematized form. The focus of the book is a new approach to the formulation of the constitutive equations for elastic and inelastic continua under large deformation. This new approach is based on using energetic and quasi-energetic couples of stress and deformation tensors. This approach leads to a unified treatment of large, anisotropic elastic, viscoelastic, and plastic deformations. The author analyses classical problems, including some involving nonlinear wave propagation, using different models for continua under large deformation, and shows how different models lead t...

  8. Barriers in the energy of deformed nuclei

    Directory of Open Access Journals (Sweden)

    V. Yu. Denisov

    2014-06-01

    Full Text Available Interaction energy between two nuclei considering to their deformations is studied. Coulomb and nuclear in-teraction energies, as well as the deformation energies of both nuclei, are taken into account at evaluation of the interaction energy. It is shown that the barrier related to the interaction energy of two nuclei depends on the de-formations and the height of the minimal barrier is evaluated. It is obtained that the heavier nucleus-nucleus sys-tems have large deformation values at the lowest barrier. The difference between the barrier between spherical nuclei and the lowest barrier between deformed nuclei increases with the mass and the charge of the interacting nuclei.

  9. Deformations of Geometric Structures in Topological Sigma Models

    International Nuclear Information System (INIS)

    Bytsenko, A. A.

    2010-01-01

    We study a Lie algebra of formal vector fields W n with it application to the perturbative deformed holomorphic symplectic structure in the A-model, and a Calabi-Yau manifold with boundaries in the B-model. We show that equivalent classes of deformations are described by a Hochschild cohomology of the DG-algebra A = (A,Q), Q = ∂-bar+∂ deform, which is defined to be the cohomology of (-1) n Q+d Hoch . Here ∂-bar is the initial non-deformed BRST operator while ∂ deform is the deformed part whose algebra is a Lie algebra of linear vector fields gl n .

  10. Deformation limits of polymer coated metal sheets

    NARCIS (Netherlands)

    Van Den Bosch, M.J.W.J.P.; Schreurs, P.J.G; Geers, M.G.D.

    2005-01-01

    Polymer coated metals are increasingly used by the packaging and automotive industry. During industrial deformation processes (drawing, roll-forming, bending etc.) the polymer-metal laminate is highly deformed at high deformation rates. These forming conditions can affect the mechanical integrity

  11. "¿CÓMO HA IDO LA FERIA?" ESTIMACIÓN DEL IMPACTO ECONÓMICO DE ACONTECIMIENTOS TURÍSTICOS: TRES ESTUDIOS DE CASO

    Directory of Open Access Journals (Sweden)

    José A. Corral

    2009-01-01

    Full Text Available Los acontecimientos pueden contribuir al desarrollo turístico de una ciudad y beneficiar a sus habitantes y empresas. Sin embargo, para poder diseñar los acontecimientos correctamente, es necesario comprender qué características determinan su impacto económico. Esta investigación pretende contribuir a tal entendimiento mediante la estimación y comparación del impacto económico de tres acontecimientos. Para estimar el impacto económico adoptamos un modelo básico de tres factores: (1 número de visitantes por (2 gasto medio por turista por (3 multiplicador. Primero estimamos el número de visitantes particulares y profesionales mediante diversos sistemas de conteo, encuestas personales e información suministrada por el organizador de los eventos. En segundo lugar, obtuvimos los importes y componentes del gasto de los visitantes por medio de una encuesta; también contamos los gastos de organización de los eventos a partir de sus respectivos presupuestos. Y, tercero, utilizamos multiplicadores de tablas input-output para analizar el impacto de los gastos directos sobre la producción, el valor añadido y el empleo y su distribución entre sectores económicos. Además, calculamos y comparamos ratios de rentabilidad de los tres eventos y dimos recomendaciones para aumentar su impacto económico.

  12. TRES NUEVAS ESPECIES DE Cryptocanthon BALTHASAR, 1942 (COLEOPTERA: SCARABAEIDAE: SCARABAEINAE PARA COLOMBIA

    Directory of Open Access Journals (Sweden)

    JORGE ARMANDO ARIAS

    2014-06-01

    Full Text Available Se presenta la descripción de tres especies nuevas de Cryptocanthon para Colombia: Cryptocanthon andradei, Cryptocanthon buriticaorum y Cryptocanthon pulidoae. Se incluye ilustraciones del habitus, caracteres morfológicos externos, la genitalia del macho incluyendo los escleritos del saco interno, así como mapas de distribución. Se presenta una clave para la determinación de las especies del género presentes en Colombia. Además, se presenta nuevas localidades de recolección para las especies conocidas para Colombia y se amplía la distribución departamental de: C. altus (Santander, C. foveatus (Santander, C. peckorum (Vichada y C. humidus(Caquetá, Nariño y Putumayo.

  13. Dealing with difficult deformations: Construction of a knowledge-based deformation atlas

    DEFF Research Database (Denmark)

    Thorup, Signe Strann; Darvann, T.A.; Hermann, N.V.

    2010-01-01

    from pre- to post-surgery using thin-plate spline warping. The registration results are convincing and represent a first move towards an automatic registration method for dealing with difficult deformations due to this type of surgery. New or breakthrough work to be presented: The method provides...... was needed. We have previously demonstrated that non-rigid registration using B-splines is able to provide automated determination of point correspondences in populations of infants without cleft lip. However, this type of registration fails when applied to the task of determining the complex deformation...

  14. From labyrinthine aplasia to otocyst deformity.

    Science.gov (United States)

    Giesemann, Anja Maria; Goetz, Friedrich; Neuburger, Jürgen; Lenarz, Thomas; Lanfermann, Heinrich

    2010-02-01

    Inner ear malformations (IEMs) are rare and it is unusual to encounter the rarest of them, namely labyrinthine aplasia (LA) and otocyst deformity. They do, however, provide useful pointers as to the early embryonic development of the ear. LA is characterised as a complete absence of inner ear structures. While some common findings do emerge, a clear definition of the otocyst deformity does not exist. It is often confused with the common cavity first described by Edward Cock. Our purpose was to radiologically characterise LA and otocyst deformity. Retrospective analysis of CT and MRI data from four patients with LA or otocyst deformity. Middle and inner ear findings were categorised by two neuroradiologists. The bony carotid canal was found to be absent in all patients. Posterior located cystic structures were found in association with LA and otocyst deformity. In the most severe cases, only soft tissue was present at the medial border of the middle ear cavity. The individuals with otocyst deformity also had hypoplasia of the petrous apex bone. These cases demonstrate gradual changes in the two most severe IEMs. Clarification of terms was necessary and, based on these findings, we propose defining otocyst deformity as a cystic structure in place of the inner ear, with the cochlea, IAC and carotid canal absent. This condition needs to be differentiated from the common cavity described by Edward Cook. A clear definition of inner ear malformations is essential if outcomes following cochlear implantation are to be compared.

  15. From labyrinthine aplasia to otocyst deformity

    International Nuclear Information System (INIS)

    Giesemann, Anja Maria; Goetz, Friedrich; Lanfermann, Heinrich; Neuburger, Juergen; Lenarz, Thomas

    2010-01-01

    Inner ear malformations (IEMs) are rare and it is unusual to encounter the rarest of them, namely labyrinthine aplasia (LA) and otocyst deformity. They do, however, provide useful pointers as to the early embryonic development of the ear. LA is characterised as a complete absence of inner ear structures. While some common findings do emerge, a clear definition of the otocyst deformity does not exist. It is often confused with the common cavity first described by Edward Cock. Our purpose was to radiologically characterise LA and otocyst deformity. Retrospective analysis of CT and MRI data from four patients with LA or otocyst deformity. Middle and inner ear findings were categorised by two neuroradiologists. The bony carotid canal was found to be absent in all patients. Posterior located cystic structures were found in association with LA and otocyst deformity. In the most severe cases, only soft tissue was present at the medial border of the middle ear cavity. The individuals with otocyst deformity also had hypoplasia of the petrous apex bone. These cases demonstrate gradual changes in the two most severe IEMs. Clarification of terms was necessary and, based on these findings, we propose defining otocyst deformity as a cystic structure in place of the inner ear, with the cochlea, IAC and carotid canal absent. This condition needs to be differentiated from the common cavity described by Edward Cook. A clear definition of inner ear malformations is essential if outcomes following cochlear implantation are to be compared. (orig.)

  16. Actitudes hacia la violencia social entre iguales y su relación con variables sociodemográficas en tres grupos de estudiantes de secundaria de la ciudad de Bucaramanga

    Directory of Open Access Journals (Sweden)

    Leonardo Yovany Álvarez Ramírez

    2007-01-01

    Full Text Available Se describen las actitudes hacia la violencia con iguales en tres grupos de estudiantes de secundaria provenientes de tres sectores de la ciudad de Bucaramanga y las posibles correlaciones entre dichas actitudes y la edad, género, estrato socioeconómico y gra- do de escolaridad en los estudiantes evaluados. Los resultados mostraron una correlación negativa débil entre las actitudes y los otros factores estudiados. Se hallaron puntuaciones más altas en el género masculino y la predominancia de tres tipos de creen- cias: la imposición sobre los otros, la agresión como medio de justicia y a su vez rechazo a las formas de violencia con iguales.

  17. The level of detail required in a deformable phantom to accurately perform quality assurance of deformable image registration

    Science.gov (United States)

    Saenz, Daniel L.; Kim, Hojin; Chen, Josephine; Stathakis, Sotirios; Kirby, Neil

    2016-09-01

    The primary purpose of the study was to determine how detailed deformable image registration (DIR) phantoms need to adequately simulate human anatomy and accurately assess the quality of DIR algorithms. In particular, how many distinct tissues are required in a phantom to simulate complex human anatomy? Pelvis and head-and-neck patient CT images were used for this study as virtual phantoms. Two data sets from each site were analyzed. The virtual phantoms were warped to create two pairs consisting of undeformed and deformed images. Otsu’s method was employed to create additional segmented image pairs of n distinct soft tissue CT number ranges (fat, muscle, etc). A realistic noise image was added to each image. Deformations were applied in MIM Software (MIM) and Velocity deformable multi-pass (DMP) and compared with the known warping. Images with more simulated tissue levels exhibit more contrast, enabling more accurate results. Deformation error (magnitude of the vector difference between known and predicted deformation) was used as a metric to evaluate how many CT number gray levels are needed for a phantom to serve as a realistic patient proxy. Stabilization of the mean deformation error was reached by three soft tissue levels for Velocity DMP and MIM, though MIM exhibited a persisting difference in accuracy between the discrete images and the unprocessed image pair. A minimum detail of three levels allows a realistic patient proxy for use with Velocity and MIM deformation algorithms.

  18. The Transit Light Curve Project. VIII. Six Occultations of the Exoplanet TrES-3

    OpenAIRE

    Winn, Joshua N.; Holman, Matthew J.; Shporer, Avi; Fernandez, Jose; Mazeh, Tsevi; Latham, David W.; Charbonneau, David; Everett, Mark E.

    2008-01-01

    We present photometry of the exoplanet host star TrES-3 spanning six occultations (secondary eclipses) of its giant planet. No flux decrements were detected, leading to 99%-confidence upper limits on the planet-to-star flux ratio of 0.00024, 0.0005, and 0.00086 in the i, z, and R bands respectively. The corresponding upper limits on the planet's geometric albedo are 0.30, 0.62, and 1.07. The upper limit in the i band rules out the presence of highly reflective clouds, and is only a factor of ...

  19. Carcinoma in situ dentro de un fibroadenoma de mama: Tres casos clínicos

    OpenAIRE

    TAPIA N,GRACE; CARRASCO A,GONZALO; CAMUS A,MAURICIO; ODDÓ B,DAVID

    2008-01-01

    El fibroadenoma (FA) es un tumor frecuente de la mama que se presenta usualmente en la segunda y tercera década de la vida. Los carcinomas de la mama raramente se desarrollan dentro de un FA, existiendo alrededor de 200 casos descritos en la literatura. Nosotros reportamos la presencia de carcinoma ductal in s/fu(CDIS) al interior de un FAen tres pacientes mujeres de 31, 45 y 47 años. La presencia de microcalcificaciones en dos pacientes y la sospecha de un papiloma intraductal en la tercera,...

  20. Deformations of symplectic Lie algebroids, deformations of holomorphic symplectic structures, and index theorems

    DEFF Research Database (Denmark)

    Nest, Ryszard; Tsygan, Boris

    2001-01-01

    Recently Kontsevich solved the classification problem for deformation quantizations of all Poisson structures on a manifold. In this paper we study those Poisson structures for which the explicit methods of Fedosov can be applied, namely the Poisson structures coming from symplectic Lie algebroids......, as well as holomorphic symplectic structures. For deformations of these structures we prove the classification theorems and a general a general index theorem....

  1. Frequency of foot deformity in preschool girls

    Directory of Open Access Journals (Sweden)

    Mihajlović Ilona

    2010-01-01

    Full Text Available Background/Aim. In order to determine the moment of creation of postural disorders, regardless of the causes of this problem, it is necessary to examine the moment of entry of children into a new environment, ie. in kindergarten or school. There is a weak evidence about the age period when foot deformity occurs, and the type of these deformities. The aim of this study was to establish the relationship between the occurrence of foot deformities and age characteristics of girls. Methods. The research was conducted in preschools 'Radosno detinjstvo' in the region of Novi Sad, using the method of random selection, on the sample of 272 girls, 4-7 years of age, classified into four strata according to the year of birth. To determine the foot deformities measurement technique using computerized digitized pedografy (CDP was applied. Results. In preschool population girls pes transversoplanus and calcanei valga deformities occurred in a very high percentage (over 90%. Disturbed longitudinal instep ie flat feet also appeared in a high percentage, but we noted the improvement of this deformity according to increasing age. Namely, there was a statistically significant correlation between the age and this deformity. As a child grows older, the deformity is lower. Conclusion. This study confirmed that the formation of foot arches probably does not end at the age of 3-4 years but lasts until school age.

  2. Versal deformation of the Lie algebra $L_2$

    NARCIS (Netherlands)

    Fialowski, A.; Post, Gerhard F.

    1999-01-01

    We investigate deformations of the infinite dimensional vector field Lie algebra spanned by the fields $e_i = z^{i+1}d/dz$, where $i \\ge 2 $. The goal is to describe the base of a ``versal'' deformation; such a versal deformation induces all the other nonequivalent deformations and solves the

  3. Cardiac fluid dynamics meets deformation imaging.

    Science.gov (United States)

    Dal Ferro, Matteo; Stolfo, Davide; De Paris, Valerio; Lesizza, Pierluigi; Korcova, Renata; Collia, Dario; Tonti, Giovanni; Sinagra, Gianfranco; Pedrizzetti, Gianni

    2018-02-20

    Cardiac function is about creating and sustaining blood in motion. This is achieved through a proper sequence of myocardial deformation whose final goal is that of creating flow. Deformation imaging provided valuable contributions to understanding cardiac mechanics; more recently, several studies evidenced the existence of an intimate relationship between cardiac function and intra-ventricular fluid dynamics. This paper summarizes the recent advances in cardiac flow evaluations, highlighting its relationship with heart wall mechanics assessed through the newest techniques of deformation imaging and finally providing an opinion of the most promising clinical perspectives of this emerging field. It will be shown how fluid dynamics can integrate volumetric and deformation assessments to provide a further level of knowledge of cardiac mechanics.

  4. Wind sock deformity in rectal atresia

    International Nuclear Information System (INIS)

    Hosseini, Seyed M V; Ghahramani, Farhad; Shamsaeefar, Alireza; Razmi, Tannaz; Zarenezhad, Mohammad

    2009-01-01

    Rectal atresia is a rare anorectal deformity. It usually presents with neonatal obstruction and it is often a complete membrane or severe stenosis. Windsock deformity has not been reported in rectal atresia especially, having been missed for 2 years. A 2-year-old girl reported only a severe constipation despite having a 1.5-cm anal canal in rectal examination with scanty discharge. She underwent loop colostomy and loopogram, which showed a wind sock deformity of rectum with mega colon. The patient underwent abdominoperineal pull-through with good result and follow-up. This is the first case of the wind sock deformity in rectal atresia being reported after 2 years of age. (author)

  5. Carga de trabajo en tres grupos de pacientes de UCI Española según el Nursing Activities Score

    Directory of Open Access Journals (Sweden)

    Francisco Javier Carmona-Monge

    Full Text Available Se objetivó valorizar la carga de trabajo al ingreso y al alta en tres grupos de pacientes (síndrome coronario agudo, insuficiencia respiratoria aguda y sepsis en terapia intensiva. Estudio descriptivo, prospectivo, de 27 meses, incluyéndose 563 pacientes, valorando carga de trabajo según Nursing Activities Score. Existieron diferencias significativas en la carga de trabajo al ingreso y en el alta entre los grupos de pacientes, siendo superior en ambos momentos la de pacientes con insuficiencia respiratoria aguda y sepsis frente a pacientes coronarios. Durante los siete primeros días de estancia se mantuvo esta diferencia, desapareciendo a partir del octavo día, equilibrándose la carga de trabajo para los tres grupos. Para conseguir una adecuada dotación de personal es fundamental contar con instrumentos para medir las necesidades de cuidados y conocer la carga de trabajo de los distintos grupos de enfermos que ingresan con mayor frecuencia en las unidades de terapia intensiva.

  6. Carga de trabajo en tres grupos de pacientes de UCI Española según el Nursing Activities Score

    Directory of Open Access Journals (Sweden)

    Francisco Javier Carmona-Monge

    2013-04-01

    Full Text Available Se objetivó valorizar la carga de trabajo al ingreso y al alta en tres grupos de pacientes (síndrome coronario agudo, insuficiencia respiratoria aguda y sepsis en terapia intensiva. Estudio descriptivo, prospectivo, de 27 meses, incluyéndose 563 pacientes, valorando carga de trabajo según Nursing Activities Score. Existieron diferencias significativas en la carga de trabajo al ingreso y en el alta entre los grupos de pacientes, siendo superior en ambos momentos la de pacientes con insuficiencia respiratoria aguda y sepsis frente a pacientes coronarios. Durante los siete primeros días de estancia se mantuvo esta diferencia, desapareciendo a partir del octavo día, equilibrándose la carga de trabajo para los tres grupos. Para conseguir una adecuada dotación de personal es fundamental contar con instrumentos para medir las necesidades de cuidados y conocer la carga de trabajo de los distintos grupos de enfermos que ingresan con mayor frecuencia en las unidades de terapia intensiva.

  7. Bilateral cleft lip nasal deformity

    Directory of Open Access Journals (Sweden)

    Singh Arun

    2009-01-01

    Full Text Available Bilateral cleft lip nose deformity is a multi-factorial and complex deformity which tends to aggravate with growth of the child, if not attended surgically. The goals of primary bilateral cleft lip nose surgery are, closure of the nasal floor and sill, lengthening of the columella, repositioning of the alar base, achieving nasal tip projection, repositioning of the lower lateral cartilages, and reorienting the nares from horizontal to oblique position. The multiplicity of procedures in the literature for correction of this deformity alludes to the fact that no single procedure is entirely effective. The timing for surgical intervention and its extent varies considerably. Early surgery on cartilage may adversely affect growth and development; at the same time, allowing the cartilage to grow in an abnormal position and contributing to aggravation of deformity. Some surgeons advocate correction of deformity at an early age. However, others like the cartilages to grow and mature before going in for surgery. With peer pressure also becoming an important consideration during the teens, the current trend is towards early intervention. There is no unanimity in the extent of nasal dissection to be done at the time of primary lip repair. While many perform limited nasal dissection for the fear of growth retardation, others opt for full cartilage correction at the time of primary surgery itself. The value of naso-alveolar moulding (NAM too is not universally accepted and has now more opponents than proponents. Also most centres in the developing world have neither the personnel nor the facilities for the same. The secondary cleft nasal deformity is variable and is affected by the extent of the original abnormality, any prior surgeries performed and alteration due to nasal growth. This article reviews the currently popular methods for correction of nasal deformity associated with bilateral cleft lip, it′s management both at the time of cleft lip repair

  8. Hormigas como plagas potenciales en tres criaderos de mariposas del suroccidente de Colombia

    Directory of Open Access Journals (Sweden)

    Sanabria-Blandón María Catalina

    2009-03-01

    Full Text Available La fauna de hormigas asociada con la zoocría de mariposas en los departamentos de Valle del Cauca y Quindío (Colombia, se colectó por captura manual en tres ambientes (mariposario, vivero y laboratorio. De 125 muestras se extrajeron 779 hormigas, pertenecientes a cinco subfamilias, 18 géneros y 24 especies. El mayor número de especies se registró en el área de laboratorio (17, seguido por vivero (16 y mariposario (13. No se encontraron diferencias significativas (Chi2 = 6.019, g.l.= 10, P>0.75, al evaluar la preferencia de las hormigas por un ambiente, sin embargo se observaron tendencias de esta manera: Wasmannia auropunctata (50%, Linepithema sp. (47%, Monomorium floricola (40% fueron las más importantes en el laboratorio, mientras que en el mariposario fueron Linepithema humile (42%, Camponotus novogranadensis (39% y Paratrechina longiconis (37.5% y en el vivero W. auropunctata (37.5% y P. longicornis (37.5%. Algunas de estas hormigas son reconocidas como vagabundas y plagas urbanas, lo que podría considerarse como un riesgo potencial para las actividades de zoocría de mariposas. En el presente estudio se propuso conocer las especies de hormigas que se asocian con tres criaderos de mariposas localizados en el suroccidente colombiano.

  9. L’hybridation interspécifique chez les champignons phytopathogènes à l’origine de nouvelles maladies

    OpenAIRE

    Frey, Pascal

    2009-01-01

    Mécanisme évolutif bien connu chez les plantes, l’hybridation interspécifique a été relativement peu étudiée dans certains groupes taxonomiques, comme les champignons. Chez les champignons phytopathogènes, l’hybridation entre une espèce indigène et une espèce exotique peut pourtant conduire à l’émergence de nouvelles maladies des plantes.

  10. Autogenous Deformation of Concrete

    DEFF Research Database (Denmark)

    Autogenous deformation of concrete can be defined as the free deformation of sealed concrete at a constant temperature. A number of observed problems with early age cracking of high-performance concretes can be attributed to this phenomenon. During the last 10 years , this has led to an increased...... focus on autogenous deformation both within concrete practice and concrete research. Since 1996 the interest has been significant enough to hold international, yearly conferences entirely devoted to this subject. The papers in this publication were presented at two consecutive half-day sessions...... at the American Concrete Institute’s Fall Convention in Phoenix, Arizona, October 29, 2002. All papers have been reviewed according to ACI rules. This publication, as well as the sessions, was sponsored by ACI committee 236, Material Science of Concrete. The 12 presentations from 8 different countries indicate...

  11. Shell effects in the nuclear deformation energy

    International Nuclear Information System (INIS)

    Ross, C.K.

    1973-01-01

    A new approach to shell effects in the Strutinsky method for calculating nuclear deformation energy is evaluated and the suggestion of non-conservation of angular momentum in the same method is resolved. Shell effects on the deformation energy in rotational bands of deformed nuclei are discussed. (B.F.G.)

  12. Infinitesimal deformations of a formal symplectic groupoid

    OpenAIRE

    Karabegov, Alexander

    2010-01-01

    Given a formal symplectic groupoid $G$ over a Poisson manifold $(M, \\pi_0)$, we define a new object, an infinitesimal deformation of $G$, which can be thought of as a formal symplectic groupoid over the manifold $M$ equipped with an infinitesimal deformation $\\pi_0 + \\epsilon \\pi_1$ of the Poisson bivector field $\\pi_0$. The source and target mappings of a deformation of $G$ are deformations of the source and target mappings of $G$. To any pair of natural star products $(\\ast, \\tilde\\ast)$ ha...

  13. The Spherical Deformation Model

    DEFF Research Database (Denmark)

    Hobolth, Asgar

    2003-01-01

    Miller et al. (1994) describe a model for representing spatial objects with no obvious landmarks. Each object is represented by a global translation and a normal deformation of a sphere. The normal deformation is defined via the orthonormal spherical-harmonic basis. In this paper we analyse the s...... a single central section of the object. We use maximum-likelihood-based inference for this purpose and demonstrate the suggested methods on real data....

  14. A q-deformed Lorentz algebra

    International Nuclear Information System (INIS)

    Schmidke, W.B.; Wess, J.; Muenchen Univ.; Zumino, B.; Lawrence Berkeley Lab., CA

    1991-01-01

    We derive a q-deformed version of the Lorentz algebra by deformating the algebra SL(2, C). The method is based on linear representations of the algebra on the complex quantum spinor space. We find that the generators usually identified with SL q (2, C) generate SU q (2) only. Four additional generators are added which generate Lorentz boosts. The full algebra of all seven generators and their coproduct is presented. We show that in the limit q→1 the generators are those of the classical Lorentz algebra plus an additional U(1). Thus we have a deformation of SL(2, C)xU(1). (orig.)

  15. Filariosis humana en la selva peruana: reporte de tres casos

    Directory of Open Access Journals (Sweden)

    María Beltrán

    2008-04-01

    Full Text Available Se presenta tres casos de filariosis de pacientes varones procedentes de la selva peruana (Junín, San Martín y Pucallpa. Un caso presentó filarias en el globo ocular y frotís sanguíneo, que según morfología, serología y biología molecular se determinó como un posible caso de filariosis zoonótica por Onchocerca spp. Los otros dos casos fueron causados por Dirofilaria spp. uno presentó un nódulo en el pómulo y sensación de movilidad en la zona y fue diagnosticado por serología y el último caso se le extrajo una filaria del dedo pulgar de la mano y fue identificado como tal por morfología y biología molecular. Estos casos son los primeros reportes en el Perú por Dirofilaria spp. y Onchocerca spp.

  16. Q-deformed algebras and many-body physics

    Energy Technology Data Exchange (ETDEWEB)

    Galetti, D; Lunardi, J T; Pimentel, B M [Instituto de Fisica Teorica (IFT), Sao Paulo, SP (Brazil); Lima, C L [Sao Paulo Univ., SP (Brazil). Inst. de Fisica

    1995-11-01

    A review is presented of some applications of q-deformed algebras to many-body systems. The rotational and pairing nuclear problems will be discussed in the context of q-deformed algebras, before presenting a more microscopically based application of q-deformed concepts to many-fermion systems. (author). 30 refs., 5 figs.

  17. Exactly marginal deformations from exceptional generalised geometry

    Energy Technology Data Exchange (ETDEWEB)

    Ashmore, Anthony [Merton College, University of Oxford,Merton Street, Oxford, OX1 4JD (United Kingdom); Mathematical Institute, University of Oxford,Andrew Wiles Building, Woodstock Road, Oxford, OX2 6GG (United Kingdom); Gabella, Maxime [Institute for Advanced Study,Einstein Drive, Princeton, NJ 08540 (United States); Graña, Mariana [Institut de Physique Théorique, CEA/Saclay,91191 Gif-sur-Yvette (France); Petrini, Michela [Sorbonne Université, UPMC Paris 05, UMR 7589, LPTHE,75005 Paris (France); Waldram, Daniel [Department of Physics, Imperial College London,Prince Consort Road, London, SW7 2AZ (United Kingdom)

    2017-01-27

    We apply exceptional generalised geometry to the study of exactly marginal deformations of N=1 SCFTs that are dual to generic AdS{sub 5} flux backgrounds in type IIB or eleven-dimensional supergravity. In the gauge theory, marginal deformations are parametrised by the space of chiral primary operators of conformal dimension three, while exactly marginal deformations correspond to quotienting this space by the complexified global symmetry group. We show how the supergravity analysis gives a geometric interpretation of the gauge theory results. The marginal deformations arise from deformations of generalised structures that solve moment maps for the generalised diffeomorphism group and have the correct charge under the generalised Reeb vector, generating the R-symmetry. If this is the only symmetry of the background, all marginal deformations are exactly marginal. If the background possesses extra isometries, there are obstructions that come from fixed points of the moment maps. The exactly marginal deformations are then given by a further quotient by these extra isometries. Our analysis holds for any N=2 AdS{sub 5} flux background. Focussing on the particular case of type IIB Sasaki-Einstein backgrounds we recover the result that marginal deformations correspond to perturbing the solution by three-form flux at first order. In various explicit examples, we show that our expression for the three-form flux matches those in the literature and the obstruction conditions match the one-loop beta functions of the dual SCFT.

  18. Deformed configurations, band structures and spectroscopic ...

    Indian Academy of Sciences (India)

    2014-03-20

    Mar 20, 2014 ... Our study gives insight into possible deformed structures at spherical shell closure. ... Considerable experimental and theoretical efforts ... True deformation effects can be seen only by considering configuration mixing.

  19. Two-component feedback loops and deformed mechanics

    International Nuclear Information System (INIS)

    Tourigny, David S.

    2015-01-01

    It is shown that a general two-component feedback loop can be viewed as a deformed Hamiltonian system. Some of the implications of using ideas from theoretical physics to study biological processes are discussed. - Highlights: • Two-component molecular feedback loops are viewed as q-deformed Hamiltonian systems. • Deformations are reversed using Jackson derivatives to take advantage of working in the Hamiltonian limit. • New results are derived for the particular examples considered. • General deformations are suggested to be associated with a broader class of biological processes

  20. Plastic Deformation of Pressured Metallic Glass

    Directory of Open Access Journals (Sweden)

    Yun Cheng

    2017-11-01

    Full Text Available Although pressured metallic glass (MG has been reported in the literature; there are few studies focusing on pressure effects on the structure; dynamics and its plastic deformation. In this paper; we report on and characterize; via molecular dynamics simulation, the structure and dynamics heterogeneity of pressured MGs, and explore a causal link between local structures and plastic deformation mechanism of pressured glass. The results exhibit that the dynamical heterogeneity of metallic liquid is more pronounced at high pressure, while the MGs were less fragile after the release of external pressure, reflected by the non-Gaussian parameter (NGP. High pressure glass shows better plastic deformation; and the local strain zone distributed more uniformly than of in normal glass. Further research indicates that although the number of icosahedrons in pressured glass was much larger than that in normal glass, while the interpenetrating connections of icosahedra (ICOI exhibited spatial correlations were rather poor; In addition, the number of ‘fast’ atoms indexed by the atoms’ moving distance is larger than that in normal glass; leading to the sharp decreasing in number of icosahedrons during deformation. An uniform distribution of ‘fast’ atoms also contributed to better plastic deformation ability in the pressured glass. These findings may suggest a link between the deformation and destruction of icosahedra with short-range order.

  1. Deformable Organic Nanowire Field-Effect Transistors.

    Science.gov (United States)

    Lee, Yeongjun; Oh, Jin Young; Kim, Taeho Roy; Gu, Xiaodan; Kim, Yeongin; Wang, Ging-Ji Nathan; Wu, Hung-Chin; Pfattner, Raphael; To, John W F; Katsumata, Toru; Son, Donghee; Kang, Jiheong; Matthews, James R; Niu, Weijun; He, Mingqian; Sinclair, Robert; Cui, Yi; Tok, Jeffery B-H; Lee, Tae-Woo; Bao, Zhenan

    2018-02-01

    Deformable electronic devices that are impervious to mechanical influence when mounted on surfaces of dynamically changing soft matters have great potential for next-generation implantable bioelectronic devices. Here, deformable field-effect transistors (FETs) composed of single organic nanowires (NWs) as the semiconductor are presented. The NWs are composed of fused thiophene diketopyrrolopyrrole based polymer semiconductor and high-molecular-weight polyethylene oxide as both the molecular binder and deformability enhancer. The obtained transistors show high field-effect mobility >8 cm 2 V -1 s -1 with poly(vinylidenefluoride-co-trifluoroethylene) polymer dielectric and can easily be deformed by applied strains (both 100% tensile and compressive strains). The electrical reliability and mechanical durability of the NWs can be significantly enhanced by forming serpentine-like structures of the NWs. Remarkably, the fully deformable NW FETs withstand 3D volume changes (>1700% and reverting back to original state) of a rubber balloon with constant current output, on the surface of which it is attached. The deformable transistors can robustly operate without noticeable degradation on a mechanically dynamic soft matter surface, e.g., a pulsating balloon (pulse rate: 40 min -1 (0.67 Hz) and 40% volume expansion) that mimics a beating heart, which underscores its potential for future biomedical applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Evidencia serológica de infecciones de Rickettsia en humanos provenientes de tres localidades de Panamá

    Directory of Open Access Journals (Sweden)

    Sergio E. Bermúdez

    2013-08-01

    Full Text Available Introducción. Desde mediados del siglo pasado, se conocen en Panamá casos de rickettsiosis, cuando fueron reportados brotes de tifus en ratones y de fiebres manchadas. A partir de entonces, poca información se tiene sobre su prevalencia en este país, lo cual se debe principalmente a que son confundidos con otras enfermedades. Objetivos. El objetivo de este trabajo fue demostrar la presencia de rickettsiosis en humanos provenientes de tres localidades de Panamá, que corresponden a zonas agropecuarias, cercanas a bosques, o que trabajaban en zoológicos. Materiales y métodos. Se escogieron tres localidades para este estudio: Tortí (provincia de Panamá, El Valle de Antón (provincia de Coclé y el Parque Municipal Summit en Ciudad de Panamá. Los voluntarios firmaron un consentimiento informado, además de responder un cuestionario. De cada voluntario se extrajo sangre venosa, la que fue analizada por medio de inmunoflorescencia indirecta, utilizando kits comerciales y láminas sensibilizadas con antígenos cultivados de Rickettsia rickettsii y Rickettsia amblyommii. Resultados. Se tomaron muestras de 97 voluntarios, 25 en Tortí, 37 en El Valle de Antón y 35 en el Parque Municipal Summit. De estos, 38 (39 % de las muestras fueron positivas en algunas de las dos técnicas practicadas: 8 (32 % en Tortí, 18 (48 % en El Valle y 12 (34 % en el Parque Municipal Summit. Conclusión. Se demuestra una alta prevalencia de anticuerpos contra Rickettsia del grupo de las fiebres manchadas en las tres áreas de estudio, además de presentarse evidencia de títulos para Rickettsia del grupo tifus en El Valle de Antón. Estas zonas podrían considerarse como endémicas por rickettsiosis, ya que existen condiciones que permiten el mantenimiento de las mismas. doi: http://dx.doi.org/10.7705/biomedica.v33i0.831

  3. Deformation mechanisms in cyclic creep and fatigue

    International Nuclear Information System (INIS)

    Laird, C.

    1979-01-01

    Service conditions in which static and cyclic loading occur in conjunction are numerous. It is argued that an understanding of cyclic creep and cyclic deformation are necessary both for design and for understanding creep-fatigue fracture. Accordingly a brief, and selective, review of cyclic creep and cyclic deformation at both low and high strain amplitudes is provided. Cyclic loading in conjunction with static loading can lead to creep retardation if cyclic hardening occurs, or creep acceleration if softening occurs. Low strain amplitude cyclic deformation is understood in terms of dislocation loop patch and persistent slip band behavior, high strain deformation in terms of dislocation cell-shuttling models. While interesting advances in these fields have been made in the last few years, the deformation mechanisms are generally poorly understood

  4. How deformation enhances mobility in a polymer glass

    Science.gov (United States)

    Lacks, Daniel

    2013-03-01

    Recent experiments show that deformation of a polymer glass can lead to orders-of-magnitude enhancement in the atomic level dynamics. To determine why this change in dynamics occurs, we carry out molecular dynamics simulations and energy landscape analyses. The simulations address the coarse-grained polystyrene model of Kremer and co-workers, and the dynamics, as quantified by the van Hove function, are examined as the glass undergoes shear deformation. In agreement with experiment, the simulations find that deformation enhances the atomic mobility. The enhanced mobility is shown to arise from two mechanisms: First, active deformation continually reduces barriers for hopping events, and the importance of this mechanism is modulated by the rate of thermally activated transitions between adjacent energy minima. Second, deformation moves the system to higher-energy regions of the energy landscape, characterized by lower barriers. Both mechanisms enhance the dynamics during deformation, and the second mechanism is also relevant after deformation has ceased.

  5. An experimental study of deformation mechanism and microstructure evolution during hot deformation of Ti–6Al–2Zr–1Mo–1V alloy

    International Nuclear Information System (INIS)

    He, D.; Zhu, J.C.; Lai, Z.H.; Liu, Y.; Yang, X.W.

    2013-01-01

    Highlights: ► Isothermal tensile deformations were carried on Ti–6Al–2Zr–1Mo–1V titanium alloy. ► Deformation activations were calculated based on kinetics rate equations. ► Deformation mechanisms are dislocation creep and self-diffusion at 800 and 850 °C. ► Microstructure globularization mechanisms varied with deformation temperature. ► Recrystallization mechanism changed from CDRX to DDRX as temperature increasing. - Abstract: Isothermal tensile tests have been performed to study the deformation mechanisms and microstructure evolution of Ti–6Al–2Zr–1Mo–1V titanium alloy in the temperature range 750–850 °C and strain rate range 0.001–0.1 s −1 . The deformation activations have been calculated based on kinetics rate equation to investigate the hot deformation mechanism. Microstructures of deformed samples have been analyzed by electron backscatter diffraction (EBSD) to evaluate the influences of hot deformation parameters on the microstructure evolution and recrystallization mechanism. The results indicate that deformation mechanisms vary with deformation conditions: at medium (800 °C) and high (850 °C) temperature, the deformation is mainly controlled by the mechanisms of dislocation creep and self-diffusion, respectively. The microstructure globularization mechanisms also depend on deformation temperature: in the temperature range from 750 to 800 °C, the high angle grain boundaries are mainly formed via dislocation accumulation or subgrain boundaries sliding and subgrains rotation; while at high temperature of 850 °C, recrystallization is the dominant mechanism. Especially, the evolution of the recrystallization mechanism with the deformation temperature is first observed and investigated in TA15 titanium alloy

  6. Mechanisms of deformation and of recrystallization of imperfect uranium monocrystals; Les mecanismes de deformation et de recristallisation des monocristaux imparfaits d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Calais, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1960-04-15

    The various means by which plastic deformations by slip, twinning or kinking are produced by tension of imperfect {alpha} uranium single crystals prepared by a {beta} {yields} {alpha} phase change, have been studied by X-rays and micrographic examination. Depending on the crystallographic orientation with respect to the direction of the applied tension, and depending on the magnitude of the change in length, the crystals are deformed either preferentially according to a single mechanism, for example twinning, or simultaneously according to two or three mechanisms. The results of a subsequent annealing of the deformed single in the {alpha} phase are studied with respect to the deformation mechanisms. In the case of a deformation due primarily to (010) [100], (011) [100] or (110) [001] sliding, there occurs recrystallization by crystal growth selectivity. If the deformation occurs via deformation bands, there is recrystallization by 'oriented nucleation'. The crystals deformed preponderantly by twinning give on recrystallization perfect crystals having optimum dimensions and having orientational characteristics closely related to those of the original crystal. Finally are discussed some criteria relating to the geometry and the dynamics with a view to explaining the occurrence of such and such a deformation mechanism of a single crystal with a given orientation. This study, in conclusion, must help to define the best conditions (crystalline orientation and process of deformation) which will promote the growth of large, perfect, single crystals. (author) [French] Les divers modes de deformation plastique, glissement, maclage et pliage, que provoque la traction de monocristaux d'uranium {alpha} imparfaits prepares par changement de phase {beta} {yields} {alpha} ont ete etudies par rayons X et par examen micrographique. Suivant l'orientation cristallographique par rapport a la direction de l'axe de traction et suivant l'importance de l'allongement, les monocristaux se

  7. Austenite strengthening and softening during hot deformation

    International Nuclear Information System (INIS)

    Tushinskij, L.I.; Vlasov, V.S.; Kazimirova, I.E.; Tokarev, A.O.

    1981-01-01

    Processes of formation of austenite structure of 20 and 12Kh18N10T steels during hot deformation and postdeformation isothermal holdings have been investigated by the methods of analysis of curves of hot deformation, high-temperature metallography and light microscopy. Deformation has been exercised by extention in vacuum with average 4x10 -2 s -1 rate. Deformation temperatures of steel 20 are 930 and 1000 deg C, of steel 12Kh18N10T - 1100 deg C. It is stated that dynamic recrystallization takes place in both investigated steels during hot deformation. In the carbonic steel it is developed by shifting sections of high-angular boundaries, flow stress in this case remains constant. Recrystallization is developed by subgrain coalescence in austenite steel, that brings about preservation of increased defect density in recrystallized volumes. As a result strengthening of steel is continued up to fracture during the increase of the deformation degree. Postdeformation weakening of 12Kh18N10T steel is slowed down as compared with weakening of carbonic steel [ru

  8. 3D geodetic monitoring slope deformations

    Directory of Open Access Journals (Sweden)

    Weiss Gabriel

    1996-06-01

    Full Text Available For plenty of slope failures that can be found in Slovakia is necessary and very important their geodetic monitoring (because of their activity, reactivisations, checks. The paper gives new methodologies for these works, using 3D terrestrial survey technologies for measurements in convenient deformation networks. The design of an optimal type of deformation model for various kinds of landslides and their exact processing with an efficient testing procedure to determine the kinematics of the slope deformations are presented too.

  9. Deformation effects in the cluster radioactivity

    International Nuclear Information System (INIS)

    Misicu, S.; Protopopescu, D.

    1998-01-01

    We investigate the influence of the deformation on the decay rates of the cluster emission process 224 Ra → 210 Pb + 14 C. The interaction between the daughter and the cluster is given by a double folding potential, containing a nuclear repulsive core, with account of the quadrupole and hexadecupole deformed densities of both fragments. Upon comparison with the experimental value of the decay rate, the results obtained point out the importance of such deformations especially for the daughter nucleus

  10. Conflicto de identidad : indefinición sexual en tres poetas de la Edad de Plata

    OpenAIRE

    Gómez Garrido, Marta

    2013-01-01

    Artículo sobre la presencia de un conflicto identitario relacionado con el género en la obra de tres poetas de la llamada Edad de Plata Española: Lucía Sánchez Saornil, Ana María Martínez Sagi y Carmen Conde. Article about the existence of a gender-related identity conflict in three female poets of the Silver Age of Spanish Literature: Lucía Sánchez Saornil, Ana María Martínez Sagi and Carmen Conde.

  11. Tres momentos en que los pueblos han querido gobernarse por medio de la democracia directa

    Directory of Open Access Journals (Sweden)

    Sergio Trejos Robert

    2016-01-01

    Full Text Available La democracia directa es un ideal que se ha perseguido tanto en la Grecia antigua, como en la Revolución francesa, y se implementa en la actualidad en algunos cantones de la Confederación Suiza. El artículo distingue tres momentos históricos durante los cuales se persiguió ese ideal, por lo que realiza un repaso histórico, con el objetivo de confirmar si efectivamente la democracia directa logró alcanzarse o si se tuvo que disolver.

  12. Colecistitis enfisematosa, revisión bibliográfica y presentación de tres casos

    OpenAIRE

    Escobar, Fernando; Vega, Neil Valentín; Valbuena, Eduart Iván

    2015-01-01

    La colecistitis enfisematosa es una rara forma de presentación de la colecistitis aguda, caracterizada por la presencia de gas en la pared, en la luz o ambas, la cual puede evolucionar a colecistitis gangrenosa y posteriormente a peritonitis. Se asocia con una alta tasa de morbilidad y mortalidad. Se presentan tres casos clínicos de hombres adultos mayores, que presentaron dolor abdominal con síntomas gastrointestinales y signos de respuesta inflamatoria sistémica. Se les practicó tomografía ...

  13. Conformal deformation of Riemann space and torsion

    International Nuclear Information System (INIS)

    Pyzh, V.M.

    1981-01-01

    Method for investigating conformal deformations of Riemann spaces using torsion tensor, which permits to reduce the second ' order equations for Killing vectors to the system of the first order equations, is presented. The method is illustrated using conformal deformations of dimer sphere as an example. A possibility of its use when studying more complex deformations is discussed [ru

  14. Quantification of abdominal aortic deformation after EVAR

    Science.gov (United States)

    Demirci, Stefanie; Manstad-Hulaas, Frode; Navab, Nassir

    2009-02-01

    Quantification of abdominal aortic deformation is an important requirement for the evaluation of endovascular stenting procedures and the further refinement of stent graft design. During endovascular aortic repair (EVAR) treatment, the aortic shape is subject to severe deformation that is imposed by medical instruments such as guide wires, catheters, and, the stent graft. This deformation can affect the flow characteristics and morphology of the aorta which have been shown to be elicitors for stent graft failures and be reason for reappearance of aneurysms. We present a method for quantifying the deformation of an aneurysmatic aorta imposed by an inserted stent graft device. The outline of the procedure includes initial rigid alignment of the two abdominal scans, segmentation of abdominal vessel trees, and automatic reduction of their centerline structures to one specified region of interest around the aorta. This is accomplished by preprocessing and remodeling of the pre- and postoperative aortic shapes before performing a non-rigid registration. We further narrow the resulting displacement fields to only include local non-rigid deformation and therefore, eliminate all remaining global rigid transformations. Finally, deformations for specified locations can be calculated from the resulting displacement fields. In order to evaluate our method, experiments for the extraction of aortic deformation fields are conducted on 15 patient datasets from endovascular aortic repair (EVAR) treatment. A visual assessment of the registration results and evaluation of the usage of deformation quantification were performed by two vascular surgeons and one interventional radiologist who are all experts in EVAR procedures.

  15. Phonon operators in deformed nuclei

    International Nuclear Information System (INIS)

    Soloviev, V.G.

    1981-01-01

    For the description of the excited states in deformed nuclei new phonon operators are introduced, which depend on the sign of the angular momentum projection onto the symmetry axis of a deformed nucleus. In the calculations with new phonons the Pauli principle is correctly taken into account in the two-phonon components of the wave functions. There is a difference in comparison with the calculation with phonons independent of the sign of the angular momentum projection. The new phonons should be used in deformed nuclei if the Pauli principle is consistently taken into account and in the calculations with the excited state wave functions having the components with more than one phonon operator [ru

  16. Tres brotes de ictiosarcotoxicosis por ingestión de Sphyraena barracuda (Walbaum y Seriola zonata (Mitchill en el Caribe de Colombia

    Directory of Open Access Journals (Sweden)

    Ricardo Alvarez

    1999-03-01

    Full Text Available Se comentan los tres brotes de ictiosarcotoxicosis (ciguatera conocidos en las costas colombianas sobre el Mar Caribe, causados por la ingestión de la carne de los peces Sphyraena barracuda (Walbaum y Seriola dumerili (Mitchiil.

  17. Highly deformable bones: unusual deformation mechanisms of seahorse armor.

    Science.gov (United States)

    Porter, Michael M; Novitskaya, Ekaterina; Castro-Ceseña, Ana Bertha; Meyers, Marc A; McKittrick, Joanna

    2013-06-01

    Multifunctional materials and devices found in nature serve as inspiration for advanced synthetic materials, structures and robotics. Here, we elucidate the architecture and unusual deformation mechanisms of seahorse tails that provide prehension as well as protection against predators. The seahorse tail is composed of subdermal bony plates arranged in articulating ring-like segments that overlap for controlled ventral bending and twisting. The bony plates are highly deformable materials designed to slide past one another and buckle when compressed. This complex plate and segment motion, along with the unique hardness distribution and structural hierarchy of each plate, provide seahorses with joint flexibility while shielding them against impact and crushing. Mimicking seahorse armor may lead to novel bio-inspired technologies, such as flexible armor, fracture-resistant structures or prehensile robotics. Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  18. Fraktalnist deformational relief polycrystalline aluminum

    Directory of Open Access Journals (Sweden)

    М.В. Карускевич

    2006-02-01

    Full Text Available  The possibility of the fractal geometry method application for the analisys of surface deformation structures under cyclic loading is presented.It is shown, that deformation relief of the alclad aluminium alloyes meets the criteria of the fractality. For the fractal demention estimation the method of  “box-counting”can be applied.

  19. Clustering and triaxial deformations of 40Ca

    International Nuclear Information System (INIS)

    Taniguchi, Yasutaka; Kimura, Masaaki; Kanada-En'yo, Yoshiko; Horiuchi, Hisashi

    2007-01-01

    We have studied the positive-parity states of 40 Ca using antisymmetrized molecular dynamics (AMD) and the generator coordinate method (GCM). Imposing two different kinds of constraints on the variational calculation, we have found various kinds of 40 Ca structures such as a deformed-shell structure, as well as α- 36 Ar and 12 C- 28 Si cluster structures. After the GCM calculation, we obtained a normal-deformed band and a superdeformed band together with their side bands associated with triaxial deformation. The calculated B(E2) values agreed well with empirical data. It was also found that the normal-deformed and superdeformed bands have non-negligible α- 36 Ar cluster and 12 C- 28 Si cluster components, respectively. This leads to the presence of an α- 36 Ar higher nodal band occurring above the normal-deformed band

  20. Strong crystal size effect on deformation twinning

    DEFF Research Database (Denmark)

    Yu, Qian; Shan, Zhi-Wei; Li, Ju

    2010-01-01

    plasticity. Accompanying the transition in deformation mechanism, the maximum flow stress of the submicrometre-sized pillars was observed to saturate at a value close to titanium’s ideal strength9, 10. We develop a ‘stimulated slip’ model to explain the strong size dependence of deformation twinning......Deformation twinning1, 2, 3, 4, 5, 6 in crystals is a highly coherent inelastic shearing process that controls the mechanical behaviour of many materials, but its origin and spatio-temporal features are shrouded in mystery. Using micro-compression and in situ nano-compression experiments, here we...... find that the stress required for deformation twinning increases drastically with decreasing sample size of a titanium alloy single crystal7, 8, until the sample size is reduced to one micrometre, below which the deformation twinning is entirely replaced by less correlated, ordinary dislocation...

  1. Dynamic tensile behaviour and deformational mechanism of C5191 phosphor bronze under high strain rates deformation

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Dao-chun [College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); College of Mechanical and Electrical Engineering, Taizhou Vocational & Technical College, Taizhou 318000 (China); Chen, Ming-he, E-mail: meemhchen@nuaa.edu.cn [College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Wang, Lei; Cheng, Hu [College of Mechanical Engineering, Taizhou University, Taizhou 318000 (China)

    2016-01-01

    High speed stamping process is used to high strength and high electrical conductivity phosphor bronze with extremely high strain rates more than 10{sup 3} s{sup −1}. This study on the dynamic tensile behaviour and deformational mechanism is to optimise the high speed stamping processes and improve geometrical precision in finished products. Thus, the tensile properties and deformation behaviour of C5191 phosphor bronze under quasi-static tensile condition at a strain rate of 0.001 s{sup −1} by electronic universal testing machine, and dynamic tensile condition at strain rate of 500, 1000 and 1500 s{sup −1} by split Hopkinson tensile bar (SHTB) apparatus were studied. The effects of strain rate and the deformation mechanism were investigated by means of SEM and TEM. The results showed that the yield strength and tensile strength of C5191 phosphor bronze under high strain rates deformation increased by 32.77% and 11.07% respectively compared with quasi-static condition, the strain hardening index increases from 0.075 to 0.251, and the strength of the material strain rates sensitivity index change from 0.005 to 0.022, which presented a clear sensitive to strain rates. Therefore, it is claimed that the dominant deformation mechanism was changed by the dislocation motion under different strain rates, and the ability of plastic deformation of C5191 phosphor bronze increased due to the number of movable dislocations increased significantly, started multi-line slip, and the soft effect of adiabatic temperature rise at the strain rate ranging from 500 to 1500 s{sup −1}.

  2. Differential Calculus on h-Deformed Spaces

    Science.gov (United States)

    Herlemont, Basile; Ogievetsky, Oleg

    2017-10-01

    We construct the rings of generalized differential operators on the h-deformed vector space of gl-type. In contrast to the q-deformed vector space, where the ring of differential operators is unique up to an isomorphism, the general ring of h-deformed differential operators {Diff}_{h},σ(n) is labeled by a rational function σ in n variables, satisfying an over-determined system of finite-difference equations. We obtain the general solution of the system and describe some properties of the rings {Diff}_{h},σ(n).

  3. Deformation relaxation in heavy-ion collisions

    International Nuclear Information System (INIS)

    Yu, L.; Gan, Z.G.; Zhang, Z.Y.; Zhang, H.F.; Li, J.Q.

    2014-01-01

    In deeply inelastic heavy-ion collisions, the quadrupole deformations of both fragments are taken as stochastic independent dynamical variables governed by the Fokker–Planck equation (FPE) under the corresponding driving potential. The mean values, variances and covariance of the fragments are analytically expressed by solving the FPE in head on collisions. The characteristics and mechanism of the deformation are discussed. It is found that both the internal structures and interactions of the colliding partners are critical for the deformation relaxation in deeply inelastic collisions.

  4. Magnetic Barkhausen emission in lightly deformed AISI 1070 steel

    Energy Technology Data Exchange (ETDEWEB)

    Capo Sanchez, J., E-mail: jcapo@cnt.uo.edu.cu [Departamento de Fisica, Facultad de Ciencias Naturales, Universidad de Oriente, Av. Patricio Lumumba s/n, 90500 Santiago de Cuba (Cuba); Campos, M.F. de [EEIMVR-Universidade Federal Fluminense, Av. dos Trabalhadores 420, Vila Santa Cecilia, 27255-125 Volta Redonda, RJ (Brazil); Padovese, L.R. [Departamento de Engenharia Mecanica, Escola Politecnica, Universidade de Sao Paulo, Av. Prof. Mello Moraes, 2231, 05508-900 Sao Paulo (Brazil)

    2012-01-15

    The Magnetic Barkhausen Noise (MBN) technique can evaluate both micro- and macro-residual stresses, and provides indication about the relevance of contribution of these different stress components. MBN measurements were performed in AISI 1070 steel sheet samples, where different strains were applied. The Barkhausen emission is also analyzed when two different sheets, deformed and non-deformed, are evaluated together. This study is useful to understand the effect of a deformed region near the surface on MBN. The low permeability of the deformed region affects MBN, and if the deformed region is below the surface the magnetic Barkhausen signal increases. - Highlights: > Evaluated residual stresses by the magnetic Barkhausen technique. > Indication about the relevance of micro-and macro-stress components. > Magnetic Barkhausen measurements were carried out in AISI 1070 steel sheet samples. > Two different sheets, deformed and non-deformed, are evaluated together. > Magnetic Barkhausen signal increases when deformed region is below the surface.

  5. Deformation properties of lead isotopes

    International Nuclear Information System (INIS)

    Tolokonnikov, S. V.; Borzov, I. N.; Lutostansky, Yu. S.; Saperstein, E. E.

    2016-01-01

    The deformation properties of a long lead isotopic chain up to the neutron drip line are analyzed on the basis of the energy density functional (EDF) in the FaNDF 0 Fayans form. The question of whether the ground state of neutron-deficient lead isotopes can have a stable deformation is studied in detail. The prediction of this deformation is contained in the results obtained on the basis of the HFB-17 and HFB-27 Skyrme EDF versions and reported on Internet. The present analysis reveals that this is at odds with experimental data on charge radii and magnetic moments of odd lead isotopes. The Fayans EDF version predicts a spherical ground state for all light lead isotopes, but some of them (for example, 180 Pb and 184 Pb) prove to be very soft—that is, close to the point of a phase transition to a deformed state. Also, the results obtained in our present study are compared with the predictions of some other Skyrme EDF versions, including SKM*, SLy4, SLy6, and UNE1. By and large, their predictions are closer to the results arising upon the application of the Fayans functional. For example, the SLy4 functional predicts, in just the same way as the FaNDF 0 functional, a spherical shape for all nuclei of this region. The remaining three Skyrme EDF versions lead to a deformation of some light lead isotopes, but their number is substantially smaller than that in the case of the HFB-17 and HFB-27 functionals. Moreover, the respective deformation energy is substantially lower, which gives grounds to hope for the restoration of a spherical shape upon going beyond the mean-field approximation, which we use here. Also, the deformation properties of neutron-rich lead isotopes are studied up to the neutron drip line. Here, the results obtained with the FaNDF 0 functional are compared with the predictions of the HFB-17, HFB-27, SKM*, and SLy4 Skyrme EDF versions. All of the EDF versions considered here predict the existence of a region where neutron-rich lead isotopes undergo

  6. Leishmaniasis cutánea zosteriforme causada por Leishmania (Viannia panamensis y Leishmania (Viannia braziliensis: reporte de tres casos

    Directory of Open Access Journals (Sweden)

    Camilo Andrés Morales

    2014-09-01

    Se presentan tres casos de leishmaniasis cutánea zosteriforme en los que se identificaron Leishmania panamensis y Leishmania braziliensis como especies infectantes. La sospecha epidemiológica derivada de la procedencia de los pacientes, así como la sospecha clínica a partir del reconocimiento de una presentación infrecuente de la enfermedad, permitieron hacer el diagnóstico.

  7. Evaluación de políticas públicas juveniles en tres municipios del Estado de México (2013-2015

    Directory of Open Access Journals (Sweden)

    Víctor Daniel García-García

    2017-01-01

    Full Text Available En este trabajo expongo los resultados de una evaluación a políticas públicas en materia de juventud llevada a cabo en tres municipios del Estado de México. En la evaluación se trabajaron las dimensiones informativa y argumentativa de la rendición de cuentas gubernamental. Sobre tres unidades de análisis, a través del método comparado, analicé cinco variables claves en torno a las políticas públicas municipales juveniles: 1 presupuesto anual destinado a política públicas de juventud; 2 beneficiarios anuales de las políticas públicas; 3 tipo de política(s; 4 enfoque de la(s política(s; 5 corresponsabilidad. Los resultados conseguidos indican que en los municipios bajo estudio no se implementaron políticas públicas juveniles integrales, sino solamente se llevaron a cabo acciones públicas desarticuladas, inconexas, desorganizadas y eventuales.

  8. Channeling of protons through radial deformed carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Borka Jovanović, V., E-mail: vborka@vinca.rs [Atomic Physics Laboratory (040), Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia); Borka, D. [Atomic Physics Laboratory (040), Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia); Galijaš, S.M.D. [Faculty of Physics, University of Belgrade, P.O. Box 368, 11001 Belgrade (Serbia)

    2017-05-18

    Highlights: • For the first time we presented theoretically obtained distributions of channeled protons with radially deformed SWNT. • Our findings indicate that influence of the radial deformation is very strong and it should not be omitted in simulations. • We show that the spatial and angular distributions depend strongly of level of radial deformation of nanotube. • Our obtained results can be compared with measured distributions to reveal the presence of various types of defects in SWNT. - Abstract: In this paper we have presented a theoretical investigation of the channeling of 1 GeV protons with the radial deformed (10, 0) single-wall carbon nanotubes (SWNTs). We have calculated channeling potential within the deformed nanotubes. For the first time we presented theoretically obtained spatial and angular distributions of channeled protons with radially deformed SWNT. We used a Monte Carlo (MC) simulation technique. We show that the spatial and angular distributions depend strongly of level of radial deformation of nanotube. These results may be useful for nanotube characterization and production and guiding of nanosized ion beams.

  9. Fifteen years of seismic monitoring at the Las Tres Virgenes, BCS, geothermal field; Quince anos de monitoreo sismico en el campo geotermico de Las Tres Virgenes, BCS

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz Prieto, Irais; Lorenzo Pulido, Cecilia [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: cecilia.lorenzo@cfe.gob.mx

    2009-07-15

    Seismic monitoring at the Las Tres Virgenes, BCS, geothermal field started in 1992 with an analog station of vertical components detecting a large number of earthquakes of varying magnitudes. In February 1993, a seismic network was installed, composed of six digital stations DR-2000-with S-6000 and S-5000 sensors and three registration channels (N-S, E-W and vertical). This was the basis for the development of a program to correct arrival-time data for P and S waves due to instrument drift. From January to April 1994 and May to August 1995, based on the 170 seismic events recorded, a velocity model was proposed. From December 1995 to July 1996, seismic data were processed and interpreted, and zones of occurrence were determined for events according to magnitude and the predominant noise in the field. From September 2003 to December 2004, 10 seismic stations (permanent and temporary) were installed and monitored and it was concluded the most active fault system was El Volcan. From September to December 2004, production wells LV-4 and LV-13 were acid-stimulated and seismic monitoring during this period allowed for the definition of two important seismic zones, both related to the El Volcan fault system and to injection well LV-8. After reopening these production wells, it was concluded an increase in seismic activity had occurred. From May to August 2006, information was compiled from the seismic network and it was concluded El Partido had became the most active fault system. Presently the seismic network in this field is composed of one SARA station and four K2 units. The SARA station is telemetrically connected to the base station. [Spanish] En el campo geotermico de Las Tres Virgenes, BCS, el monitoreo sismico empezo a partir de 1992 con una sola estacion analogica de registro vertical, la cual detecto una gran cantidad de temblores de distintas magnitudes. En febrero de 1993 se instalo una red sismica con seis estaciones digitales DR-2000 con sensores S-6000 y S

  10. 2D vector-cyclic deformable templates

    DEFF Research Database (Denmark)

    Schultz, Nette; Conradsen, Knut

    1998-01-01

    In this paper the theory of deformable templates is a vector cycle in 2D is described. The deformable template model originated in (Grenander, 1983) and was further investigated in (Grenander et al., 1991). A template vector distribution is induced by parameter distribution from transformation...... matrices applied to the vector cycle. An approximation in the parameter distribution is introduced. The main advantage by using the deformable template model is the ability to simulate a wide range of objects trained by e.g. their biological variations, and thereby improve restoration, segmentation...... and probabillity measurement. The case study concerns estimation of meat percent in pork carcasses. Given two cross-sectional images - one at the front and one near the ham of the carcass - the areas of lean and fat and a muscle in the lean area are measured automatically by the deformable templates....

  11. Isothermal deformation of gamma titanium aluminide

    International Nuclear Information System (INIS)

    Srinivasan, R.; Singh, J.P.; Tuval, E.; Weiss, I.

    1996-01-01

    Gamma titanium aluminide has received considerable attention in recent years from the automotive industry as a potential material for making rotating and reciprocating components to produce a quieter and more efficient engine. The objectives of this study were to identify processing routes for the manufacture of automobile valves from gamma titanium aluminide. The issues considered were microstructure and composition of the material, and processing parameters such as deformation rates, temperatures, and total deformation. This paper examines isothermal deformation of gamma titanium aluminide in order to develop a processing window for this type of material

  12. Geodetic deformation monitoring at Pendidikan Diponegoro Dam

    Science.gov (United States)

    Yuwono, Bambang Darmo; Awaluddin, Moehammad; Yusuf, M. A.; Fadillah, Rizki

    2017-07-01

    Deformation monitoring is one indicator to assess the feasibility of Dam. In order to get the correct result of the deformation, it is necessary to determine appropriate deformation monitoring network and the observation data should be analyse and evaluated carefully. Measurement and analysis of deformation requires relatively accurate data and the precision is high enough, one of the observation method that used is GPS (Global Positioning System). The research was conducted at Pendidikan Undip Dams is Dam which is located in Tembang. Diponegoro Dam was built in 2013 and a volume of 50.86 m3 of water, inundation normal width of up to 13,500 m2. The main purpose of these building is not only for drainage but also for education and micro hydro power plant etc. The main goal of this reasearch was to monitor and analyze the deformation at Pendidikan Undip Dam and to determaine whether GPS measurement could meet accuracy requirement for dam deformation measurements. Measurements were made 2 times over 2 years, 2015 and 2016 using dual frequency GPS receivers with static methods and processed by Scientific Software GAMIT 10.6

  13. An electromechanical based deformable model for soft tissue simulation.

    Science.gov (United States)

    Zhong, Yongmin; Shirinzadeh, Bijan; Smith, Julian; Gu, Chengfan

    2009-11-01

    Soft tissue deformation is of great importance to surgery simulation. Although a significant amount of research efforts have been dedicated to simulating the behaviours of soft tissues, modelling of soft tissue deformation is still a challenging problem. This paper presents a new deformable model for simulation of soft tissue deformation from the electromechanical viewpoint of soft tissues. Soft tissue deformation is formulated as a reaction-diffusion process coupled with a mechanical load. The mechanical load applied to a soft tissue to cause a deformation is incorporated into the reaction-diffusion system, and consequently distributed among mass points of the soft tissue. Reaction-diffusion of mechanical load and non-rigid mechanics of motion are combined to govern the simulation dynamics of soft tissue deformation. An improved reaction-diffusion model is developed to describe the distribution of the mechanical load in soft tissues. A three-layer artificial cellular neural network is constructed to solve the reaction-diffusion model for real-time simulation of soft tissue deformation. A gradient based method is established to derive internal forces from the distribution of the mechanical load. Integration with a haptic device has also been achieved to simulate soft tissue deformation with haptic feedback. The proposed methodology does not only predict the typical behaviours of living tissues, but it also accepts both local and large-range deformations. It also accommodates isotropic, anisotropic and inhomogeneous deformations by simple modification of diffusion coefficients.

  14. Cultivo de las microalgas dulceacuícolas Kirchneriella obesa, Scenedesmus quadricauda y Chlorococcum infusorium empleando tres medios de cultivo

    Directory of Open Access Journals (Sweden)

    A. A. Ortega-Salas

    2012-01-01

    Full Text Available Se cultivaron las microalgas dulceacuícolas Kirchneriella obesa (G. S. West Schmidle 1893, Scenedesmus quadricauda (Chodat, Turpin Bréb 1835 y Chlorococcum infusorium (Schrank Meneghini 1842, con el propósito comparar las tasas de crecimiento y su rendimiento en tres medios de cultivo, el F/2 de Guillard, Fert I y Fert II. El agua utilizada se pasó en filtros de cinco, uno y 0.45 mm, y se trató con luz ultravioleta. La temperatura varió de 24 a 25°C. Se cultivaron en un sistema de volumen creciente a partir de recipientes de 62.5 mL, duplicando el medio de cultivo cada 24 h, con el fin de completar 32 L en nueve días. Cada 24 h se obtuvieron tres muestras de 1 a 10 mL del cultivo, se preservaron en una solución de lugol y se calculó la concentración de las microalgas cada 24 h. El número total de células de las tres especies aumentó de manera exponencial hasta el final de los experimentos en los medios de cultivo F/2 y Fert I; esto no fue así con el medio Fert II, en el cual la tasa de duplicación y el número total de divisiones fueron más bajas. El medio F/2 y el Fert I ofrecieron mejores resultados que el Fert II. Los medios Fert I y Fert II tienen un valor económico más bajo que el medio F/2. El crecimiento y el rendimiento fueron mejores con el medio F/2, seguido por FI y FII.

  15. DIVERSIDAD DE ESCARABAJOS COPRÓFAGOS (Coleoptera: Scarabaeidae EN UN BOSQUE DE GALERÍA CON TRES ESTADIOS DE ALTERACIÓN

    Directory of Open Access Journals (Sweden)

    G. Fagua

    2007-06-01

    Full Text Available En un bosque de galería, en los Llanos Orientales Meta-Colombia, se estudiaron los escarabajos coprófagos asociados a tres secciones dentro del bosque que presentaban diferentes tiempos de alteración: 50, 5 y 1 año, provocados por procesos de entresacado de árboles maderables. En cada sección del bosque, por medio de trampas de caída, se calculó la riqueza, abundancia y diversidad durante el mes de julio (época de lluvias. Se capturaron un total de 2358 individuos pertenecientes a 22 especies. La especie dominante durante el muestreo fue Canthidium cupreum, para las tres secciones. Del total de especies, el 27,3% son específicas para una sección en particular, el 40,9% se encuentran en dos de las tres secciones y el 31,8% son generalistas. El índice de Brillouin, mostró que la sección del bosque con 5 años de alteración, posee la mayor diversidad, con un total de 1233 individuos y 16 especies, seguido por la sección del bosque con 1 año, con 607 individuos y 14 especies y finalmente la sección del bosque con 50 años, con 518 individuos y 15 especies. Estos resultados indican que no existe una relación proporcional, entre la conservación de un bosque y la diversidad de coprófagos, y parece insinuar una correlación positiva entre áreas intervenidas y altos índices de diversidad. La actividad selectiva de entresacado de árboles maderables está contribuyendo en este ecosistema a la conservación de poblaciones de escarabajos, manteniendo procesos funcionales para este tipo de bosques.

  16. Análisis demográfico de tres poblaciones de Zidona dufresnei localizadas en el Atlántico sudoccidental

    Directory of Open Access Journals (Sweden)

    Alonso I Medina

    2015-07-01

    Full Text Available El estudio de los patrones demográficos en especies que soportan una presión pesquera es fundamental para la conservación y manejo de sus poblaciones. Zidona dufresnei es un caracol marino endémico del Atlántico sudoccidental, y es una de las principales especies capturadas por la pesca artesanal. Además se caracteriza por las marcadas diferencias entre sus poblaciones respecto a la talla máxima alcanzada. El objetivo de este estudio fue evaluar la estructura poblacional y los patrones morfogravimétricos intra- e interpoblacionales en tres localidades distribuidas a lo largo del Mar Argentino (Mar del Plata, Golfo San Matías, Bahía San Antonio. El rango de tallas varió entre 80 y 230 mm. Los ejemplares más pequeños correspondieron a la Bahía de San Antonio, mientras que los más grandes al Golfo San Matías. En todos los casos, las distribuciones de frecuencias de tallas y pesos siguieron una distribución unimodal. No se encontraron diferencias significativas en los pesos y tallas entre sexos. El ancho, largo y peso total de los ejemplares difirieron significativamente entre los tres sitios tanto en la prueba global como en las comparaciones a posteriori. La proporción de sexos no difirió de 1:1. Los resultados obtenidos en este estudio ampliaron el rango de distribución batimétrica de Z. dufresnei, estableciendo su variación entre 0 y 120 m. Además, se registró una nueva talla máxima de 230 mm para esta especie en el Mar Argentino. Las diferencias entre las tres poblaciones estudiadas se deberían a las presiones ambientales locales o a un flujo génico interrumpido o reducido.

  17. EL CRONOTOPO DE LA EXCLUSIÓN EN TRES NOVELAS DE LA GENERACIÓN DEL 38

    OpenAIRE

    Cristian Montes

    2008-01-01

    Se propone aquí la existencia, en tres novelas de la generación del 38, de un cronotopo de exclusión que caracteriza la representación de la ciudad. Dicho cronotopo tensiona y fracciona el propósito de integración social del discurso nacionalista.This article analyzes three novels of the Generation of the year 1938 and proposes the existence of a chronotope of exclusion that characterizes the representation of the city. This chronotope places stress upon and finally destroys the social integr...

  18. Tres leyes innovadoras en Uruguay: Aborto, matrimonio homosexual y regulación de la marihuana

    OpenAIRE

    Arocena, Felipe; Aguiar, Sebastián

    2017-01-01

    Uruguay sorprendió al mundo en 2013 por tres leyes aprobadas en poco más de un año: el matrimonio entre personas del mismo sexo, la despenalización del aborto y la regulación de la marihuana. En este trabajo, desarrollaremos el contenido de estas normas, exploraremos algunas de las principales causas de su aprobación en este momento histórico del país, y, finalmente, discutiremos las probables virtudes y problemas de las respectivas implementaciones Uruguay shocked the world in 2013 with t...

  19. Mentira y Verdad en tres Novelas de Sergio Ramírez: Algunos Procedimientos de Verosimilitud

    OpenAIRE

    Rodríguez Sancho, Javier

    2013-01-01

    Con base en la narrativa del nicaragüense Sergio Ramírez, se efectúa un análisis sobre algunos procedimientos de verosimilitud utilizados por el escritor en tres de sus novelas: Tiempo de fulgor (1970); ¿Te dio miedo la sangre? (1977) y Un baile de máscaras (1995). La evaluación de los textos busca comprender los niveles en que el escritor hace uso de ciertos procedimientos de verosimilitud para contarnos algunas mentiras verdaderas como él mismo lo ha llamado, en su ensayo: Mentiras verdader...

  20. Densidad de la madera de Pinus ponderosa (Dougl. Ex Laws) en tres localidades de Argentina

    OpenAIRE

    JOVANOVSKI, A; JARAMILLO, M; LOGUERCIO, G; ANTEQUERA, S

    2002-01-01

    Se estudió el ancho de anillo, la densidad básica de la madera y su variación y la relación entre ancho de anillo y densidad en Pinus ponderosa (Dougl. Ex. Laws) creciendo en tres localidades de la Patagonia andina argentina. El ancho de anillo obtenido se corresponde con una conífera de rápido crecimiento, mientras que la densidad media es levemente menor que la de la especie creciendo en los sitios de origen en Estados Unidos. Ring-width growth, wood specific gravity and its variation, a...

  1. Respuesta al abonado, acolchado y ramoneo de tres arbustos forrajeros en ambientes semiáridos.

    OpenAIRE

    Ramos, M. E.; Robles, A.B.; Ruiz-Mirazo, J.; González-Rebollar, J.L.

    2011-01-01

    Los arbustos forrajeros constituyen una fuente de alimentación importante para el ganado extensivo o semiextensivo en los ambientes semiáridos. Este estudio evalúa el comportamiento de tres especies leñosas (Atriplex halimus, Dorycnium pentaphyllum y Olea europaea cv. Marteño) implantadas con fines forrajeros, en secano, a las que se aplicaron distintos tratamientos: 1) abono orgánico, 2) abono orgánico + acolchado con plástico y, 3) control. Dos años después de la plantación, la mit...

  2. Humedal urbano en Punta Arenas: Sustentabilidad del Proyecto Parque Ecológico Humedal Tres Puentes

    OpenAIRE

    Luis Inostroza Pino

    2009-01-01

    El Humedal Tres Puentes, ubicado en la entrada norte de Punta Arenas, es un espacio relevante desde el punto de vista ecológico y hábitat de una numerosa avifauna, uno de los más importantes de la ciudad. Sin embargo el Humedal está seriamente amenazado, dado su ubicación sobre uno de los principales vectores de crecimiento de la ciudad de Punta Arenas, en terrenos que han adquirido plusvalía paulatinamente, bien por efecto de la obra pública del Estado o por el simple crecimiento vegetativo ...

  3. Joining by plastic deformation

    DEFF Research Database (Denmark)

    Mori, Ken-ichiro; Bay, Niels; Fratini, Livan

    2013-01-01

    As the scale and complexity of products such as aircraft and cars increase, demand for new functional processes to join mechanical parts grows. The use of plastic deformation for joining parts potentially offers improved accuracy, reliability and environmental safety as well as creating opportuni......As the scale and complexity of products such as aircraft and cars increase, demand for new functional processes to join mechanical parts grows. The use of plastic deformation for joining parts potentially offers improved accuracy, reliability and environmental safety as well as creating...

  4. On deformations of linear differential systems

    NARCIS (Netherlands)

    Gontsov, R.R.; Poberezhnyi, V.A.; Helminck, G.F.

    2011-01-01

    This article concerns deformations of meromorphic linear differential systems. Problems relating to their existence and classification are reviewed, and the global and local behaviour of solutions to deformation equations in a neighbourhood of their singular set is analysed. Certain classical

  5. Mechanisms of strain accommodation in plastically-deformed zircon under simple shear deformation conditions during amphibolite-facies metamorphism

    Science.gov (United States)

    Kovaleva, Elizaveta; Klötzli, Urs; Wheeler, John; Habler, Gerlinde

    2018-02-01

    This study documents the strain accommodation mechanisms in zircon under amphibolite-facies metamorphic conditions in simple shear. Microstructural data from undeformed, fractured and crystal-plastically deformed zircon crystals are described in the context of the host shear zone, and evaluated in the light of zircon elastic anisotropy. Our work challenges the existing model of zircon evolution and shows previously undescribed rheological characteristics for this important accessory mineral. Crystal-plastically deformed zircon grains have axis oriented parallel to the foliation plane, with the majority of deformed grains having axis parallel to the lineation. Zircon accommodates strain by a network of stepped low-angle boundaries, formed by switching between tilt dislocations with the slip systems {010} and {110} and rotation axis [001], twist dislocations with the rotation axis [001], and tilt dislocations with the slip system {001} and rotation axis [010]. The slip system {110} is newly described for zircon. Most misorientation axes in plastically-deformed zircon grains are parallel to the XY plane of the sample and have [001] crystallographic direction. Such behaviour of strained zircon lattice is caused by elastic anisotropy that has a direct geometric control on the rheology, deformation mechanisms and dominant slip systems in zircon. Young's modulus and P wave velocity have highest values parallel to zircon [001] axis, indicating that zircon is elastically strong along this direction. Poisson ratio and Shear modulus demonstrate that zircon is also most resistant to shearing along [001]. Thus, [001] axis is the most common rotation axis in zircon. The described zircon behaviour is important to take into account during structural and geochronological investigations of (poly)metamorphic terrains. Geometry of dislocations in zircon may help reconstructing the geometry of the host shear zone(s), large-scale stresses in the crust, and, possibly, the timing of

  6. Theory of reversal nonisothermal elastic-plastic deformation

    International Nuclear Information System (INIS)

    Shorr, B.F.

    1979-01-01

    Considered is approximated theory of nonisothermal elastic-plastic deformation at arbitrary laws of loading, permitting to describe nonisothermal isotropic and anisotropic strengthening of the material, Bauschinger effect and different tempo of plastic deformation development over different directions of loading depending on the deformation prehistory. The comparison of the theory with the experimental data showed good coincidence and sufficient simplicity permits to use it in technical calcualtions

  7. A Bed-Deformation Experiment Beneath Engabreen, Norway

    Science.gov (United States)

    Iverson, N. R.; Hooyer, T. S.; Fischer, U. H.; Cohen, D.; Jackson, M.; Moore, P. L.; Lappegard, G.; Kohler, J.

    2001-12-01

    Although deformation of sediment beneath ice masses may contribute to their motion and may sometimes enable fast glacier flow, both the kinematics and mechanics of deformation are controversial. This controversy stems, in part, from subglacial measurements that are difficult to interpret. Measurements have been made either beneath ice margins or remotely through boreholes with interpretive limitations caused by uncertain instrument position and performance, uncertain sediment thickness and bed geometry, and unknown disturbance of the bed and stress state by drilling. We have used a different approach made possible by the Svartisen Subglacial Laboratory, which enables human access to the bed of Engabreen, Norway, beneath 230 m of temperate ice. A trough (2 m x 1.5 m x 0.4 m deep) was blasted in the rock bed and filled with sediment (75 percent sand and gravel, 20 percent silt, 5 percent clay). Instruments were placed in the sediment to record shear deformation (tiltmeters), dilation and contraction, total normal stress, and pore-water pressure. Pore pressure was manipulated by feeding water to the base of the sediment with a high-pressure pump, operated in a rock tunnel 4 m below the bed surface. After irregular deformation during closure of ice on the sediment, shear deformation and volume change stopped, and total normal stress became constant at 2.2 MPa. Subsequent pump tests, which lasted several hours, induced pore-water pressures greater than 70 percent of the total normal stress and resulted in shear deformation over most of the sediment thickness with attendant dilation. Ice separated from the sediment when effective normal stress was lowest, arresting shear deformation. Displacement profiles during pump tests were similar to those observed by Boulton and co-workers at Breidamerkurjökull, Iceland, with rates of shear strain increasing upward toward the glacier sole. Such deformation does not require viscous deformation resistance and is expected in a

  8. Molecular dynamics simulation of deformation twin in rocksalt vanadium nitride

    International Nuclear Information System (INIS)

    Fu, Tao; Peng, Xianghe; Zhao, Yinbo; Li, Tengfei; Li, Qibin; Wang, Zhongchang

    2016-01-01

    We perform molecular dynamics simulation of nano-indentation with a cylindrical indenter to investigate the formation mechanism of deformation twin in vanadium nitride (VN) with a rocksalt structure. We find that the deformation twins occur during the loading stage, and subsequently conduct a systematic analysis of nucleation, propagation and thickening of a deformation twin. We find that the nucleation of a partial dislocation and its propagation to form a stacking fault are premise of deformation twin formation. The sequential nucleation and propagation of partial dislocation on adjacent parallel {111} planes are found to cause the thickening of the deformation twin. Moreover, the deformation twins can exist in VN at room temperature. - Highlights: • MD simulations of indentation are performed to study the deformation twin in VN. • The deformation twins can occur in VN during the loading stage. • The nucleation, propagation and thickening of a deformation twin are analyzed. • The deformation twins can exist in VN at room temperature.

  9. Análisis de tres factores de un modelo de eficacia escolar aplicado por una organización privada en zona rural en el Perú

    OpenAIRE

    Carreras Mariani, Piera María

    2013-01-01

    La presente investigación Análisis de tres factores de un modelo de eficacia escolar aplicado por una organización privada en zona rural en el Perú tiene como propósito, analizar el rol que le asigna un programa para la mejora de la educación primaria rural a tres de los factores del modelo de eficacia escolar: el liderazgo directivo, la participación de los padres de familia y el trabajo en redes educativas. El programa objeto de análisis es desarrollado por una institución privada que...

  10. Deformation associated with continental normal faults

    Science.gov (United States)

    Resor, Phillip G.

    Deformation associated with normal fault earthquakes and geologic structures provide insights into the seismic cycle as it unfolds over time scales from seconds to millions of years. Improved understanding of normal faulting will lead to more accurate seismic hazard assessments and prediction of associated structures. High-precision aftershock locations for the 1995 Kozani-Grevena earthquake (Mw 6.5), Greece image a segmented master fault and antithetic faults. This three-dimensional fault geometry is typical of normal fault systems mapped from outcrop or interpreted from reflection seismic data and illustrates the importance of incorporating three-dimensional fault geometry in mechanical models. Subsurface fault slip associated with the Kozani-Grevena and 1999 Hector Mine (Mw 7.1) earthquakes is modeled using a new method for slip inversion on three-dimensional fault surfaces. Incorporation of three-dimensional fault geometry improves the fit to the geodetic data while honoring aftershock distributions and surface ruptures. GPS Surveying of deformed bedding surfaces associated with normal faulting in the western Grand Canyon reveals patterns of deformation that are similar to those observed by interferometric satellite radar interferometry (InSAR) for the Kozani Grevena earthquake with a prominent down-warp in the hanging wall and a lesser up-warp in the footwall. However, deformation associated with the Kozani-Grevena earthquake extends ˜20 km from the fault surface trace, while the folds in the western Grand Canyon only extend 500 m into the footwall and 1500 m into the hanging wall. A comparison of mechanical and kinematic models illustrates advantages of mechanical models in exploring normal faulting processes including incorporation of both deformation and causative forces, and the opportunity to incorporate more complex fault geometry and constitutive properties. Elastic models with antithetic or synthetic faults or joints in association with a master

  11. La Copa de los “tres mundos”: reflexiones sobre globalización, media y la Copa 2014

    Directory of Open Access Journals (Sweden)

    Bruno Thebaldi

    2015-01-01

    Full Text Available [es] Para Santos (2001, hay tres tipos de mundos “en el mismo mundo”. En verdad, cada mundo es vivido de acuerdo con el “lugar de mundo” ocupado por el individuo. En cada mundo hay una manera diferente de ver la globalización. Dependiendo del mundo, la globalización puede ser vista como “fabulosa”, “perversa” o “humanitaria”. En este artículo, discutimos el punto de vista de estos tres tipos de mundo, juntamente con la cuestión de la democratización de los media, usando como objeto de reflexión la Copa del Mundo 2014, en Brasil. [en] For Santos (2001, there are three kinds of worlds “in the same world”. In fact, each world is lived in according to the “world position” occupied for the individual. In each world there is a different manner to see the globalization. Depending on the world, the globalization can be seen as “fabulous”, “perverse” or “humanity”. In this article, we discuss the point of view from this three kinds of worlds, in additional to the question of media democratization, using by object of reflection the 2014 World Cup, in Brazil.

  12. El discurso político del Cómic sobre el pasado nacional. Tres lecturas del Siglo de Oro.

    Directory of Open Access Journals (Sweden)

    Isabelle Touton

    2012-07-01

    Full Text Available Este artículo se propone mostrar cómo la representación del pasado en el cómic, por medio de opciones estéticas y de recursos específicos a este arte, conlleva como cualquier relectura una dimensión política no siempre explícita. Para ello, nos hemos centrado en la reelaboración de tres “lugares de memoria” del Siglo de Oro (la España y la figura de Felipe II; los tercios de Flandes en tiempos de Felipe IV; Santa Teresa de Jesús en tres obras con objetivos, tonos, modalidades formales y dimensiones plásticas bastante alejados unos de otros: Felipe II (1999 de Antonio Hernández Palacios; El capitán Alatriste (2005, adaptación de la primera novela del ciclo de Pérez-Reverte, con guión Carlos Giménez y dibujos de Joan Mundet, y La vie passionnée de Thérèse d’Avila (1980 de la historietista francesa Claire Brétécher.

  13. Microfluidic assay of the deformability of primitive erythroblasts.

    Science.gov (United States)

    Zhou, Sitong; Huang, Yu-Shan; Kingsley, Paul D; Cyr, Kathryn H; Palis, James; Wan, Jiandi

    2017-09-01

    Primitive erythroblasts (precursors of red blood cells) enter vascular circulation during the embryonic period and mature while circulating. As a result, primitive erythroblasts constantly experience significant hemodynamic shear stress. Shear-induced deformation of primitive erythroblasts however, is poorly studied. In this work, we examined the deformability of primitive erythroblasts at physiologically relevant flow conditions in microfluidic channels and identified the regulatory roles of the maturation stage of primitive erythroblasts and cytoskeletal protein 4.1 R in shear-induced cell deformation. The results showed that the maturation stage affected the deformability of primitive erythroblasts significantly and that primitive erythroblasts at later maturational stages exhibited a better deformability due to a matured cytoskeletal structure in the cell membrane.

  14. Infinitesimal Deformations of a Formal Symplectic Groupoid

    Science.gov (United States)

    Karabegov, Alexander

    2011-09-01

    Given a formal symplectic groupoid G over a Poisson manifold ( M, π 0), we define a new object, an infinitesimal deformation of G, which can be thought of as a formal symplectic groupoid over the manifold M equipped with an infinitesimal deformation {π_0 + \\varepsilon π_1} of the Poisson bivector field π 0. To any pair of natural star products {(ast,tildeast)} having the same formal symplectic groupoid G we relate an infinitesimal deformation of G. We call it the deformation groupoid of the pair {(ast,tildeast)} . To each star product with separation of variables {ast} on a Kähler-Poisson manifold M we relate another star product with separation of variables {hatast} on M. We build an algorithm for calculating the principal symbols of the components of the logarithm of the formal Berezin transform of a star product with separation of variables {ast} . This algorithm is based upon the deformation groupoid of the pair {(ast,hatast)}.

  15. Stent Design Affects Femoropopliteal Artery Deformation.

    Science.gov (United States)

    MacTaggart, Jason; Poulson, William; Seas, Andreas; Deegan, Paul; Lomneth, Carol; Desyatova, Anastasia; Maleckis, Kaspars; Kamenskiy, Alexey

    2018-03-23

    Poor durability of femoropopliteal artery (FPA) stenting is multifactorial, and severe FPA deformations occurring with limb flexion are likely involved. Different stent designs result in dissimilar stent-artery interactions, but the degree of these effects in the FPA is insufficiently understood. To determine how different stent designs affect limb flexion-induced FPA deformations. Retrievable markers were deployed into n = 28 FPAs of lightly embalmed human cadavers. Bodies were perfused and CT images were acquired with limbs in the standing, walking, sitting, and gardening postures. Image analysis allowed measurement of baseline FPA foreshortening, bending, and twisting associated with each posture. Markers were retrieved and 7 different stents were deployed across the adductor hiatus in the same limbs. Markers were then redeployed in the stented FPAs, and limbs were reimaged. Baseline and stented FPA deformations were compared to determine the influence of each stent design. Proximal to the stent, Innova, Supera, and SmartFlex exacerbated foreshortening, SmartFlex exacerbated twisting, and SmartControl restricted bending of the FPA. Within the stent, all devices except Viabahn restricted foreshortening; Supera, SmartControl, and AbsolutePro restricted twisting; SmartFlex and Innova exacerbated twisting; and Supera and Viabahn restricted bending. Distal to the stents, all devices except AbsolutePro and Innova exacerbated foreshortening, and Viabahn, Supera, Zilver, and SmartControl exacerbated twisting. All stents except Supera were pinched in flexed limb postures. Peripheral self-expanding stents significantly affect limb flexion-induced FPA deformations, but in different ways. Although certain designs seem to accommodate some deformation modes, no device was able to match all FPA deformations.

  16. Analysis on Wetting Deformation Properties of Silty Clay

    Directory of Open Access Journals (Sweden)

    Xinrong Liu

    2014-06-01

    Full Text Available Changes in water level that cause deformation and stability problems often occur in foundation pit engineering. Water damage is one of the main problems that will lead to disasters in foundation pit engineering. Research findings with regard to properties of wetting deformation due to water damage can be applied not only in foundation pit engineering, slope engineering, hydraulic engineering, and mining engineering but also in related issues in the field of theoretical research and practice. In this study, the characteristics of silty clay deformation after wetting are examined from the perspective of the effect of wetting on the side wall of foundation pit, and wetting experiments on silty clay of a selected area’s stratum located in Chongqing Municipality are conducted under different confining pressures and stress levels through a multi-function triaxial apparatus. Then, laws of silty clay wetting deformation are obtained, and the relationship between wetting stress level and wetting deformation amount is also figured out. The study reveals that the maximum values of wetting deformation under different confining pressures have appear at a particular stress level; therefore, the related measures should be taken to avoid this deformation in the process of construction.

  17. A q-deformed nonlinear map

    International Nuclear Information System (INIS)

    Jaganathan, Ramaswamy; Sinha, Sudeshna

    2005-01-01

    A scheme of q-deformation of nonlinear maps is introduced. As a specific example, a q-deformation procedure related to the Tsallis q-exponential function is applied to the logistic map. Compared to the canonical logistic map, the resulting family of q-logistic maps is shown to have a wider spectrum of interesting behaviours, including the co-existence of attractors-a phenomenon rare in one-dimensional maps

  18. Recrystallization of deformed copper - kinetics and microstructural evolution

    DEFF Research Database (Denmark)

    Lin, Fengxiang

    The objective of this study is to investigate the recrystallization kinetics and microstructural evolution in copper deformed to high strains, including copper deformed by cold-rolling and copper deformed by dynamic plastic deformation (DPD). Various characterization techniques were used, including...... electron backscatter diffraction (EBSD), Vickers hardness test, 3D X-ray diffraction (3DXRD) and differential scanning calorimetry (DSC). For the cold-rolled samples, a series of initial parameters was investigated for their effects on the recrystallization kinetics and textures, including initial grain...

  19. The deformation record of olivine in mylonitic peridotites from the Finero Complex, Ivrea Zone: Separate deformation cycles during exhumation

    Science.gov (United States)

    Matysiak, Agnes K.; Trepmann, Claudia A.

    2015-12-01

    Mylonitic peridotites from the Finero complex are investigated to detect characteristic olivine microfabrics that can resolve separate deformation cycles at different metamorphic conditions. The heterogeneous olivine microstructures are characterized by deformed porphyroclasts surrounded by varying amounts of recrystallized grains. A well-developed but only locally preserved foam structure is present in recrystallized grain aggregates. This indicates an early stage of dynamic recrystallization and subsequent recovery and recrystallization at quasi-static stress conditions, where the strain energy was reduced such that a reduction in surface energy controlled grain boundary migration. Ultramylonites record a renewed stage of localized deformation and recrystallization by a second generation of recrystallized grains that do not show a foam structure. This second generation of recrystallized grains as well as sutured grain and kink band boundaries of porphyroclasts indicate that these microstructures developed during a stage of localized deformation after development of the foam structure. The heterogeneity of the microfabrics is interpreted to represent several (at least two) cycles of localized deformation separated by a marked hiatus with quasi-static recrystallization and recovery and eventually grain growth. The second deformation cycle did not only result in reactivation of preexisting shear zones but instead also locally affected the host rock that was not deformed in the first stage. Such stress cycles can result from sudden increases in differential stress imposed by seismic events, i.e., high stress-loading rates, during exhumation of the Finero complex.

  20. Deformations of spacetime and internal symmetries

    Directory of Open Access Journals (Sweden)

    Gresnigt Niels G.

    2017-01-01

    Full Text Available Algebraic deformations provide a systematic approach to generalizing the symmetries of a physical theory through the introduction of new fundamental constants. The applications of deformations of Lie algebras and Hopf algebras to both spacetime and internal symmetries are discussed. As a specific example we demonstrate how deforming the classical flavor group S U(3 to the quantum group S Uq(3 ≡ U q (su(3 (a Hopf algebra and taking into account electromagnetic mass splitting within isospin multiplets leads to new and exceptionally accurate baryon mass sum rules that agree perfectly with experimental data.

  1. Red blood cell-deformability measurement: review of techniques.

    Science.gov (United States)

    Musielak, M

    2009-01-01

    Cell-deformability characterization involves general measurement of highly complex relationships between cell biology and physical forces to which the cell is subjected. The review takes account of the modern technical solutions simulating the action of the force applied to the red blood cell in macro- and microcirculation. Diffraction ektacytometers and rheoscopes measure the mean deformability value for the total red blood cell population investigated and the deformation distribution index of individual cells, respectively. Deformation assays of a whole single cell are possible by means of optical tweezers. The single cell-measuring setups for micropipette aspiration and atomic force microscopy allow conducting a selective investigation of deformation parameters (e.g., cytoplasm viscosity, viscoelastic membrane properties). The distinction between instrument sensitivity to various RBC-rheological features as well as the influence of temperature on measurement are discussed. The reports quoted confront fascinating possibilities of the techniques with their medical applications since the RBC-deformability has the key position in the etiology of a wide range of conditions.

  2. κ-deformed Dirac oscillator in an external magnetic field

    Science.gov (United States)

    Chargui, Y.; Dhahbi, A.; Cherif, B.

    2018-04-01

    We study the solutions of the (2 + 1)-dimensional κ-deformed Dirac oscillator in the presence of a constant transverse magnetic field. We demonstrate how the deformation parameter affects the energy eigenvalues of the system and the corresponding eigenfunctions. Our findings suggest that this system could be used to detect experimentally the effect of the deformation. We also show that the hidden supersymmetry of the non-deformed system reduces to a hidden pseudo-supersymmetry having the same algebraic structure as a result of the κ-deformation.

  3. Phonon operators for deformed nuclei

    International Nuclear Information System (INIS)

    Solov'ev, V.G.

    1982-01-01

    The mathematical formalism with the phonon operators independent of the signature of the angular momentum projection turns out to be inadequate for describing excited states of deformed nuclei. New phonon operators are introduced which depend on the signature of the angular momentum projection on the symmetry axis of a deformed nucleus. It is shown that the calculations with the new phonons take correctly into account the Pauli principle in two-phonon components of wave functions. The results obtained differ from those given by the phonons independent of the signature of the angular momentum projection. The new phonons must be used in deformed nuclei at taking systematically the Pauli principle into account and in calculations involving wave functions of excited states having components with more than one-phonon operator

  4. Deformations of vector-scalar models

    Science.gov (United States)

    Barnich, Glenn; Boulanger, Nicolas; Henneaux, Marc; Julia, Bernard; Lekeu, Victor; Ranjbar, Arash

    2018-02-01

    Abelian vector fields non-minimally coupled to uncharged scalar fields arise in many contexts. We investigate here through algebraic methods their consistent deformations ("gaugings"), i.e., the deformations that preserve the number (but not necessarily the form or the algebra) of the gauge symmetries. Infinitesimal consistent deformations are given by the BRST cohomology classes at ghost number zero. We parametrize explicitly these classes in terms of various types of global symmetries and corresponding Noether currents through the characteristic cohomology related to antifields and equations of motion. The analysis applies to all ghost numbers and not just ghost number zero. We also provide a systematic discussion of the linear and quadratic constraints on these parameters that follow from higher-order consistency. Our work is relevant to the gaugings of extended supergravities.

  5. Deformation properties of lead isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Tolokonnikov, S. V.; Borzov, I. N.; Lutostansky, Yu. S.; Saperstein, E. E., E-mail: saper43-7@mail.ru [National Research Center Kurchatov Institute (Russian Federation)

    2016-01-15

    The deformation properties of a long lead isotopic chain up to the neutron drip line are analyzed on the basis of the energy density functional (EDF) in the FaNDF{sup 0} Fayans form. The question of whether the ground state of neutron-deficient lead isotopes can have a stable deformation is studied in detail. The prediction of this deformation is contained in the results obtained on the basis of the HFB-17 and HFB-27 Skyrme EDF versions and reported on Internet. The present analysis reveals that this is at odds with experimental data on charge radii and magnetic moments of odd lead isotopes. The Fayans EDF version predicts a spherical ground state for all light lead isotopes, but some of them (for example, {sup 180}Pb and {sup 184}Pb) prove to be very soft—that is, close to the point of a phase transition to a deformed state. Also, the results obtained in our present study are compared with the predictions of some other Skyrme EDF versions, including SKM*, SLy4, SLy6, and UNE1. By and large, their predictions are closer to the results arising upon the application of the Fayans functional. For example, the SLy4 functional predicts, in just the same way as the FaNDF{sup 0} functional, a spherical shape for all nuclei of this region. The remaining three Skyrme EDF versions lead to a deformation of some light lead isotopes, but their number is substantially smaller than that in the case of the HFB-17 and HFB-27 functionals. Moreover, the respective deformation energy is substantially lower, which gives grounds to hope for the restoration of a spherical shape upon going beyond the mean-field approximation, which we use here. Also, the deformation properties of neutron-rich lead isotopes are studied up to the neutron drip line. Here, the results obtained with the FaNDF{sup 0} functional are compared with the predictions of the HFB-17, HFB-27, SKM*, and SLy4 Skyrme EDF versions. All of the EDF versions considered here predict the existence of a region where neutron

  6. q-deformed conformal superalgebra and its Hopf subalgebras

    International Nuclear Information System (INIS)

    Dobrev, V.K.; Lukierski, J.; Sobczyk, J.; Tolstoy, V.N.

    1992-07-01

    We present in detail a Hopf superalgebra U q (su(2,2/2)) which is a q-deformation of the conformal superalgebra su(2,2/1). The superalgebra U q (su(2,2/1)) contains as a subalgebra a q-deformed super-Poincare algebra and as Hopf subalgebras two conjugate 16-generator q-deformed super-Weyl algebras, which are q-deformation of parabolic subalgebras of su(2,2/1). We use several (anti-) involutions, including the standard Cartan involution and a *-antiinvolution under which the super-Weyl algebras are *-subalgebras of U q (su(2,2/1)). The q-deformed Lorentz algebra is Hopf subalgebra of both Weyl algebras and is preserved by all (anti-) involutions considered. (author). 26 refs

  7. Jaynes-Cummings model and the deformed-oscillator algebra

    International Nuclear Information System (INIS)

    Crnugelj, J.; Martinis, M.; Mikuta-Martinis, V.

    1994-01-01

    We study the time evolution of the deformed Jaynes-Cummings model (DJCM). It is shown that the standard JCM and its recent non-linear generalizations involving the intensity-dependent coupling and/or the multiphoton coupling are only particular cases of the DJCM. The time evolution of the mean phonon number and the population inversion are evaluated. A special case of the q-deformed JCM is analyzed explicitly. The long time quasi-periodic revival effects of the q-deformed JCM are observed for q∼1 and an initially large mean photon number. For other values of the deformation parameter q we observe chaotic-like behaviour of the population inversion. Photons are assumed to be initially in the deformed coherent state. ((orig.))

  8. DETERMINACIÓN DE ALGUNOS METABOLITOS SECUNDARIOS EN TRES MORFOTIPOS DE COCONA (Solanum sessiliflorum Dunal

    Directory of Open Access Journals (Sweden)

    Juliana E. Cardona J.

    2011-12-01

    Full Text Available Se determinó la presencia y la estructura(mediante el uso de técnicas espectroscópicasy cromatográficas de algunos metabolitossecundarios en tres morfotiposdel fruto de cocona (Solanum sessiliflorumDunal; Solanaceae cultivados en eldepartamento del Guaviare. Se destacóla presencia de ácido p-cumárico, ácidop-hidroxidihidrocumárico, naringenina,salicilato de metilo, hidrocarburos decadena larga, ácidos grasos y sus ésteresmetílicos y etílicos. Algunos de estoscompuestos se acumulan únicamente enel epicarpio de la fruta. La comparaciónde metabolitos volátiles permitió establecerdiferencias químicas entre los tresmorfotipos de la fruta.

  9. Dynamic deformation theory of spherical and deformed light and heavy nuclei with A = 12-240

    International Nuclear Information System (INIS)

    Kumar, Krishna.

    1979-01-01

    Deformation dependent wave functions are calculated for different types of even-even nuclei (spherical, transitional, deformed; light, medium, heavy) without any fitting parameters. These wave functions are employed for the energies, B(E2)'s, quadrupole and magnetic moments of selected nuclei with A = 12-240 (with special emphasis on 56 Fe, 154 Gd), and for neutron cross sections of 148 Sm, 152 Sm

  10. Canny edge-based deformable image registration.

    Science.gov (United States)

    Kearney, Vasant; Huang, Yihui; Mao, Weihua; Yuan, Baohong; Tang, Liping

    2017-02-07

    This work focuses on developing a 2D Canny edge-based deformable image registration (Canny DIR) algorithm to register in vivo white light images taken at various time points. This method uses a sparse interpolation deformation algorithm to sparsely register regions of the image with strong edge information. A stability criterion is enforced which removes regions of edges that do not deform in a smooth uniform manner. Using a synthetic mouse surface ground truth model, the accuracy of the Canny DIR algorithm was evaluated under axial rotation in the presence of deformation. The accuracy was also tested using fluorescent dye injections, which were then used for gamma analysis to establish a second ground truth. The results indicate that the Canny DIR algorithm performs better than rigid registration, intensity corrected Demons, and distinctive features for all evaluation matrices and ground truth scenarios. In conclusion Canny DIR performs well in the presence of the unique lighting and shading variations associated with white-light-based image registration.

  11. Localized deformation of zirconium-liner tube

    International Nuclear Information System (INIS)

    Nagase, Fumihisa; Uchida, Masaaki

    1988-03-01

    Zirconium-liner tube has come to be used in BWR. Zirconium liner mitigates the localized stress produced by the pellet-cladding interaction (PCI). In this study, simulating the ridging, stresses were applied to the inner surfaces of zirconium-liner tubes and Zircaloy-2 tubes, and, to investigate the mechanism and the extent of the effect, the behavior of zirconium liner was examined. As the result of examination, stress was concentrated especially at the edge of the deformed region, where zirconium liner was highly deformed. Even after high stress was applied, the deformation of Zircaloy part was small, since almost the concentrated stress was mitigated by the deformation of zirconium liner. In addition, stress and strain distributions in the cross section of specimen were calculated with a computer code FEMAXI-III. The results also showed that zirconium liner mitigated the localized stress in Zircaloy, although the affected zone was restricted to the region near the boundary between zirconium liner and Zircaloy. (author)

  12. Nuclear masses, deformations and shell effects

    International Nuclear Information System (INIS)

    Hirsch, Jorge G; Barbero, César A; Mariano, Alejandro E

    2011-01-01

    We show that the Liquid Drop Model is best suited to describe the masses of prolate deformed nuclei than of spherical nuclei. To this end three Liquid Drop Mass formulas are employed to describe nuclear masses of eight sets of nuclei with similar quadrupole deformations. It is shown that they are able to fit the measured masses of prolate deformed nuclei with an RMS smaller than 750 keV, while for the spherical nuclei the RMS is, in the three cases, larger than 2000 keV. The RMS of the best fit of the masses of semi-magic nuclei is also larger than 2000 keV. The parameters of the three models are studied, showing that the surface symmetry term is the one which varies the most from one group of nuclei to another. In one model, isospin dependent terms are also found to exhibit strong changes. The inclusion of shell effects allows for better fits, which continue to be better in the prolate deformed nuclei region.

  13. Three-dimensional deformation of orthodontic brackets

    Science.gov (United States)

    Melenka, Garrett W; Nobes, David S; Major, Paul W

    2013-01-01

    Braces are used by orthodontists to correct the misalignment of teeth in the mouth. Archwire rotation is a particular procedure used to correct tooth inclination. Wire rotation can result in deformation to the orthodontic brackets, and an orthodontic torque simulator has been designed to examine this wire–bracket interaction. An optical technique has been employed to measure the deformation due to size and geometric constraints of the orthodontic brackets. Images of orthodontic brackets are collected using a stereo microscope and two charge-coupled device cameras, and deformation of orthodontic brackets is measured using a three-dimensional digital image correlation technique. The three-dimensional deformation of orthodontic brackets will be evaluated. The repeatability of the three-dimensional digital image correlation measurement method was evaluated by performing 30 archwire rotation tests using the same bracket and archwire. Finally, five Damon 3MX and five In-Ovation R self-ligating brackets will be compared using this technique to demonstrate the effect of archwire rotation on bracket design. PMID:23762201

  14. Three-dimensional deformation of orthodontic brackets.

    Science.gov (United States)

    Melenka, Garrett W; Nobes, David S; Major, Paul W; Carey, Jason P

    2013-01-01

    Braces are used by orthodontists to correct the misalignment of teeth in the mouth. Archwire rotation is a particular procedure used to correct tooth inclination. Wire rotation can result in deformation to the orthodontic brackets, and an orthodontic torque simulator has been designed to examine this wire-bracket interaction. An optical technique has been employed to measure the deformation due to size and geometric constraints of the orthodontic brackets. Images of orthodontic brackets are collected using a stereo microscope and two charge-coupled device cameras, and deformation of orthodontic brackets is measured using a three-dimensional digital image correlation technique. The three-dimensional deformation of orthodontic brackets will be evaluated. The repeatability of the three-dimensional digital image correlation measurement method was evaluated by performing 30 archwire rotation tests using the same bracket and archwire. Finally, five Damon 3MX and five In-Ovation R self-ligating brackets will be compared using this technique to demonstrate the effect of archwire rotation on bracket design.

  15. Effect of plastic deformation on the niobium thermal expansion

    International Nuclear Information System (INIS)

    Savitskij, E.M.; Bychkova, M.I.; Kanikovskij, V.B.

    1978-01-01

    Using dilatometric method the effect of plastic deformation on change of thermal expansion coefficient (TEC) of niobium of different purity was studied. It was shown that deformation affected the TEC in different ways. At first the deformation degree rising causes linear decrease of the TEC and then linear increase. Carbon intensifies the TEC decrease of deformed niobium. The linear correlation was established between the TEC and the value of macroscopic stresses in plastic deformed niobium. The expression indicating the metal TEC change under loading was defined for case of strain hardening

  16. Compensation of deformations in 3D cone beam tomography

    International Nuclear Information System (INIS)

    Desbat, L.; Roux, S.; Roux, S.; Grangeat, P.

    2006-01-01

    In dynamic tomography, the measured objects or organs are no-longer supposed to be static in the scanner during the acquisition but are supposed to move or to be deformed. Our approach is the analytic deformation compensation during the reconstruction. Our work concentrates on 3-dimensional cone beam tomography. We introduce a new large class of deformations preserving the 3-dimensional cone beam geometry. We show that deformations from this class can be analytically compensated. We present numerical experiments on phantoms showing the compensation of these deformations in 3-dimensional cone beam tomography. (authors)

  17. Inelastic deformations of fault and shear zones in granitic rock

    International Nuclear Information System (INIS)

    Wilder, D.G.

    1986-02-01

    Deformations during heating and cooling of three drifts in granitic rock were influenced by the presence of faults and shear zones. Thermal deformations were significantly larger in sheared and faulted zones than where the rock was jointed, but neither sheared nor faulted. Furthermore, thermal deformations in faulted or sheared rock were not significantly recovered during subsequent cooling, thus a permanent deformation remained. This inelastic response is in contrast with elastic behavior identified in unfaulted and unsheared rock segments. A companion paper indicates that deformations in unsheared or unfaulted rock were effectively modeled as an elastic response. We conclude that permanent deformations occurred in fractures with crushed minerals and fracture filling or gouge materials. Potential mechanisms for this permanent deformation are asperity readjustments during thermal deformations, micro-shearing, asperity crushing and crushing of the secondary fracture filling minerals. Additionally, modulus differences in sheared or faulted rock as compared to more intact rock would result in greater deformations in response to the same thermal loads

  18. {kappa}-deformed realization of D=4 conformal algebra

    Energy Technology Data Exchange (ETDEWEB)

    Klimek, M. [Technical Univ. of Czestochowa, Inst. of Mathematics and Computer Science, Czestochowa (Poland); Lukierski, J. [Universite de Geneve, Department de Physique Theorique, Geneve (Switzerland)

    1995-07-01

    We describe the generators of {kappa}-conformal transformations, leaving invariant the {kappa}-deformed d`Alembert equation. In such a way one obtains the conformal extension of-shell spin spin zero realization of {kappa}-deformed Poincare algebra. Finally the algebraic structure of {kappa}-deformed conformal algebra is discussed. (author). 23 refs.

  19. The influences of deformation velocity and temperature on localized deformation of zircaloy-4 in tensile tests

    International Nuclear Information System (INIS)

    Boratto, F.J.M.

    1973-01-01

    A new parameter to describe the necking stability in zircaloy-4 during tensile tests is introduced. The parameter is defined as: s = ∂Ln (dσ/dε)/∂Ln ((1/L)dL/dt) for constant temperature, deformation and history. Measures of stress strain rate sensitivity n, reduction of the area at fracture, and deformation profiles of tensile fracture, are done. A complete description of the curve of non-uniform deformation variation with the temperature, is presented. The results are compared with existing data for pure commercially titanium. The influence of strain rate and history on s and n parameters, in the temperature range from 100-700 0 C). (author) [pt

  20. IMPACTO DE LA PENDIENTE Y TRES SISTEMAS DE PRODUCCIÓN SOBRE EL ESCURRIMIENTO, LA EROSIÓN Y EL RENDIMIENTO DE MAÍZ

    Directory of Open Access Journals (Sweden)

    Bernardo Villar Sánchez

    2013-12-01

    Full Text Available En 2001 se realizó un trabajo de investigación en el municipio de Suchiapa, Chis., México, con objeto de diagnosticar el nivel de fertilidad de suelos de ladera en seis estratos formados por tres rangos de pendiente y dos sistemas de manejo, así como evaluar el impacto de la pendiente y tres sistemas de producción, sobre el escurrimiento, la erosión y el rendimiento de maíz. El modelo EPIC (Erosion/Productivity Impact Calculador fue alimentado con la información obtenida del análisis de suelos, datos climáticos y de manejo del suelo y del cultivo de maíz, para realizar simulaciones para nueve escenarios formados por tres rangos de pendiente (15% y tres tipos de uso del suelo (siembra de maíz, siembra de maíz intercalado con barreras vivas de timbre en curvas a nivel y siembra comercial de timbre, para estimar su impacto sobre el escurrimiento, la erosión y el rendimiento de maíz. Hubo diferencias significativas en la pendiente y uso de suelo en todas las características del suelo evaluadas, pero en la interacción de ambos factores, sólo se detectaron diferencias significativas (P≤0.01 en la capacidad de intercambio catiónico, y el carbono orgánico. En la evaluación del efecto de la pendiente y sistemas de producción, sólo se detectó significancia (P≤0.01 en el factor uso del suelo, en las variables escurrimiento y erosión.

  1. Cyclic Plastic Deformation and Welding Simulation

    NARCIS (Netherlands)

    Ten Horn, C.H.L.J.

    2003-01-01

    One of the concerns of a fitness for purpose analysis is the quantification of the relevant material properties. It is known from experiments that the mechanical properties of a material can change due to a monotonic plastic deformation or a cyclic plastic deformation. For a fitness for purpose

  2. Deformed metals - structure, recrystallisation and strength

    DEFF Research Database (Denmark)

    Hansen, Niels; Juul Jensen, Dorte

    2011-01-01

    It is shown how new discoveries and advanced experimental techniques in the last 25 years have led to paradigm shifts in the analysis of deformation and annealing structures of metals and in the way the strength of deformed samples is related to structural parameters. This is described in three...

  3. An experimental study of plastic deformation of materials

    DEFF Research Database (Denmark)

    Knudsen, Tine

    The thesis falls in three parts, focusing on different aspects of plastic deformation of metals. Part I investigates the dislocation structures induced by hot deformation and compares these with the structures after cold deformation. In particular, it is shown that the dislocation structures...... after cold deformation by calorimetry and by analysis of the dislocation structure. The stored energy measured by calorimetry is found to be larger than that determined from the dislocation structure by a factor between 1.9 and 2.7, and this factor decreases with the plastic strain. Part III aimed...

  4. Quantum deformations of conformal algebras with mass-like deformation parameters

    International Nuclear Information System (INIS)

    Frydryszak, Andrzej; Lukierski, Jerzy; Mozrzymas, Marek; Minnaert, Pierre

    1998-01-01

    We recall the mathematical apparatus necessary for the quantum deformation of Lie algebras, namely the notions of coboundary Lie algebras, classical r-matrices, classical Yang-Baxter equations (CYBE), Froebenius algebras and parabolic subalgebras. Then we construct the quantum deformation of D=1, D=2 and D=3 conformal algebras, showing that this quantization introduce fundamental mass parameters. Finally we consider with more details the quantization of D=4 conformal algebra. We build three classes of sl(4,C) classical r-matrices, satisfying CYBE and depending respectively on 8, 10 and 12 generators of parabolic subalgebras. We show that only the 8-dimensional r-matrices allow to impose the D=4 conformal o(4,2)≅su(2,2) reality conditions. Weyl reflections and Dynkin diagram automorphisms for o(4,2) define the class of admissible bases for given classical r-matrices

  5. Granular deformation mechanisms in semi-solid alloys

    International Nuclear Information System (INIS)

    Gourlay, C.M.; Dahle, A.K.; Nagira, T.; Nakatsuka, N.; Nogita, K.; Uesugi, K.; Yasuda, H.

    2011-01-01

    Deformation mechanisms in equiaxed, partially solid Al-15 wt.% Cu are studied in situ by coupling shear-cell experiments with synchrotron X-ray radiography. Direct evidence is presented for granular deformation mechanisms in both globular and equiaxed-dendritic samples at solid fractions shortly after crystal impingement. It is demonstrated that dilatancy, arching and jamming occur at the crystal scale, and that these can cause stick-slip flow due to periodic dilation and compaction at low displacement rate. Granular deformation is found to be similar in globular and equiaxed-dendritic samples if length is scaled by the crystal size and packing is considered to occur among crystal envelopes. Rheological differences between the morphologies are discussed in terms of the competition between crystal rearrangement and crystal deformation.

  6. On Deformations and Contractions of Lie Algebras

    Directory of Open Access Journals (Sweden)

    Marc de Montigny

    2006-05-01

    Full Text Available In this contributed presentation, we discuss and compare the mutually opposite procedures of deformations and contractions of Lie algebras. We suggest that with appropriate combinations of both procedures one may construct new Lie algebras. We first discuss low-dimensional Lie algebras and illustrate thereby that whereas for every contraction there exists a reverse deformation, the converse is not true in general. Also we note that some Lie algebras belonging to parameterized families are singled out by the irreversibility of deformations and contractions. After reminding that global deformations of the Witt, Virasoro, and affine Kac-Moody algebras allow one to retrieve Lie algebras of Krichever-Novikov type, we contract the latter to find new infinite dimensional Lie algebras.

  7. Cooperación universitaria en redes telemáticas : tres propuestas para una Tele-Universidad Iberoamericana

    OpenAIRE

    Echeverría, Javier

    2000-01-01

    Echeverría, J. (2000). Cooperación universitaria en redes telemáticas: tres propuestas para una Tele-Universidad Iberoamericana. Redes 7(15), 131-138. Las nuevas tecnologías de la información y de las telecomunicaciones (NTIT) posibilitan la creación de un nuevo espacio social para las interrelaciones humanas al que denomino tercer entorno, para distinguirlo del entorno natural y del entorno urbano, es decir del campo y de la ciudad. Dicha transformación puede ser comparada con las grandes...

  8. Pollybeak Deformity in Middle Eastern Rhinoplasty: Prevention and Treatment.

    Science.gov (United States)

    Hussein, Wael K A; Foda, Hossam M T

    2016-08-01

    The pollybeak deformity is one of the commonest causes of revision rhinoplasty. The Middle Eastern nose has certain criteria that predispose to the development of pollybeak deformity. The aim of this study is to detect the factors contributing to the development of pollybeak deformity in the Middle Eastern nose and methods used to prevent as well as to treat such deformity. Out of the 1,160 revision patients included in this study, 720 (62%) patients had a pollybeak deformity. The commonest contributing factors included underprojected tip with poor support in 490 (68%) patients, excessive supratip scarring in 259 (36%) patients, overresected bony dorsum in 202 (28%) patients, and high anterior septal angle in 173 (24%) patients. The methods used by the authors to treat the pollybeak deformity are described, along with the local steroid injection protocol used to guard against the recurrence of pollybeak deformity. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  9. La inclusión de la línea de tres puntos en minibasket. (Three-point line’s inclusion in mini-basketball.

    Directory of Open Access Journals (Sweden)

    José Ignacio Alonso Roque

    2008-10-01

    Full Text Available Resumen El reglamento de Minibasket no ha sufrido modificaciones significativas desde sus inicios. Para la temporada 2005/2006 la Federación Española de Baloncesto propuso unas modificaciones al reglamento, de las cuales destaca una línea de tres puntos con forma rectangular. El objetivo de este trabajo fue analizar la bibliografía con respecto a las modificaciones reglamentarias y a la línea de tres puntos en Minibasket, desde un enfoque formativo para el jugador. Las reglas de los deportes de iniciación y en concreto de Minibasket deben responder a las demandas de los sujetos, sus necesidades y motivaciones con el fin de lograr un aprendizaje óptimo. En este sentido, tras revisar la bibliografía, no se encuentran estudios científicos que se centren en analizar la inclusión de la línea de tres puntos, ni que analicen la posición y distancia a la que se debe situar dicha línea para mejorar el juego en Minibasket. Sin embargo, la inclusión de la línea de tres puntos, en las competiciones de las cuales se ha encontrado referencias, fue todo un éxito. Por lo que son necesarias investigaciones que ayuden a esclarecer las limitaciones que existen a la hora de proponer una línea de tres puntos, adaptada a las necesidades formativas y a las características de los jugadores de Minibasket, para favorecer el lanzamiento y obtener éxito desde posiciones alejadas. Abstract Mini-basketball rules do not have been changed in a significant way regarding the original idea. For the season 2005-2006, the Spanish Federation of Basketball proposed some changes in its rules, from which a rectangular three-point line stands out. The aim of this study was to examine the bibliography with respect to the rule modifications and to the three-point line in Mini-basketball from a formative point of view. In sport initiation and in Mini-basketball, rules must improve the skill efficiency, performance, enjoyment and satisfaction to the learners. After review

  10. Deformation Microstructure in Beta-Titanium After Deformation at Low Temperatures

    National Research Council Canada - National Science Library

    Humphreys, F. J; Bate, P. S; Brough, I

    2005-01-01

    .... The contractor shall use a beta Ti alloy that is stable and single-phase at room temperature. The contractor shall evaluate the microstructure of the material after deformation at room temperature and at temperatures up to ̃400C...

  11. Registration of deformed multimodality medical images

    International Nuclear Information System (INIS)

    Moshfeghi, M.; Naidich, D.

    1989-01-01

    The registration and combination of images from different modalities have several potential applications, such as functional and anatomic studies, 3D radiation treatment planning, surgical planning, and retrospective studies. Image registration algorithms should correct for any local deformations caused by respiration, heart beat, imaging device distortions, and so forth. This paper reports on an elastic matching technique for registering deformed multimodality images. Correspondences between contours in the two images are used to stretch the deformed image toward its goal image. This process is repeated a number of times, with decreasing image stiffness. As the iterations continue, the stretched image better approximates its goal image

  12. Making Deformable Template Models Operational

    DEFF Research Database (Denmark)

    Fisker, Rune

    2000-01-01

    for estimation of the model parameters, which applies a combination of a maximum likelihood and minimum distance criterion. Another contribution is a very fast search based initialization algorithm using a filter interpretation of the likelihood model. These two methods can be applied to most deformable template......Deformable template models are a very popular and powerful tool within the field of image processing and computer vision. This thesis treats this type of models extensively with special focus on handling their common difficulties, i.e. model parameter selection, initialization and optimization....... A proper handling of the common difficulties is essential for making the models operational by a non-expert user, which is a requirement for intensifying and commercializing the use of deformable template models. The thesis is organized as a collection of the most important articles, which has been...

  13. Foam rheology at large deformation

    Science.gov (United States)

    Géminard, J.-C.; Pastenes, J. C.; Melo, F.

    2018-04-01

    Large deformations are prone to cause irreversible changes in materials structure, generally leading to either material hardening or softening. Aqueous foam is a metastable disordered structure of densely packed gas bubbles. We report on the mechanical response of a foam layer subjected to quasistatic periodic shear at large amplitude. We observe that, upon increasing shear, the shear stress follows a universal curve that is nearly exponential and tends to an asymptotic stress value interpreted as the critical yield stress at which the foam structure is completely remodeled. Relevant trends of the foam mechanical response to cycling are mathematically reproduced through a simple law accounting for the amount of plastic deformation upon increasing stress. This view provides a natural interpretation to stress hardening in foams, demonstrating that plastic effects are present in this material even for minute deformation.

  14. Deformation and shell effects in nuclear mass formulas

    International Nuclear Information System (INIS)

    Barbero, César; Hirsch, Jorge G.; Mariano, Alejandro E.

    2012-01-01

    We analyze the ability of three different Liquid Drop Mass (LDM) formulas to describe nuclear masses for nuclei in various deformation regions. Separating the 2149 measured nuclear species into eight sets with similar quadrupole deformations, we show that the masses of prolate deformed nuclei are better described than those of spherical ones. In fact, the prolate deformed nuclei are fitted with an RMS smaller than 750 keV, while for spherical and semi-magic species the RMS is always larger than 2000 keV. These results are found to be independent of pairing. It is also shown that the macroscopic sector of the Duflo–Zuker (DZ) mass model reproduces shell effects, while most of the deformation dependence is lost and the RMS is larger than in any LDM. Adding to the LDM the microscopically motivated DZ master terms introduces the shell effects, allowing for a significant reduction in the RMS of the fit but still exhibiting a better description of prolate deformed nuclei. The inclusion of shell effects following the Interacting Boson Model's ideas produces similar results.

  15. Deformation and shell effects in nuclear mass formulas

    Energy Technology Data Exchange (ETDEWEB)

    Barbero, Cesar [Departamento de Fisica, Universidad Nacional de La Plata, C.C. 67, 1900 La Plata (Argentina); Instituto de Fisica La Plata, CONICET, 1900 La Plata (Argentina); Hirsch, Jorge G., E-mail: hirsch@nucleares.unam.mx [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, 04510 Mexico D.F. (Mexico); Mariano, Alejandro E. [Departamento de Fisica, Universidad Nacional de La Plata, C.C. 67, 1900 La Plata (Argentina); Instituto de Fisica La Plata, CONICET, 1900 La Plata (Argentina)

    2012-01-15

    We analyze the ability of three different Liquid Drop Mass (LDM) formulas to describe nuclear masses for nuclei in various deformation regions. Separating the 2149 measured nuclear species into eight sets with similar quadrupole deformations, we show that the masses of prolate deformed nuclei are better described than those of spherical ones. In fact, the prolate deformed nuclei are fitted with an RMS smaller than 750 keV, while for spherical and semi-magic species the RMS is always larger than 2000 keV. These results are found to be independent of pairing. It is also shown that the macroscopic sector of the Duflo-Zuker (DZ) mass model reproduces shell effects, while most of the deformation dependence is lost and the RMS is larger than in any LDM. Adding to the LDM the microscopically motivated DZ master terms introduces the shell effects, allowing for a significant reduction in the RMS of the fit but still exhibiting a better description of prolate deformed nuclei. The inclusion of shell effects following the Interacting Boson Model's ideas produces similar results.

  16. Exponentiation and deformations of Lie-admissible algebras

    International Nuclear Information System (INIS)

    Myung, H.C.

    1982-01-01

    The exponential function is defined for a finite-dimensional real power-associative algebra with unit element. The application of the exponential function is focused on the power-associative (p,q)-mutation of a real or complex associative algebra. Explicit formulas are computed for the (p,q)-mutation of the real envelope of the spin 1 algebra and the Lie algebra so(3) of the rotation group, in light of earlier investigations of the spin 1/2. A slight variant of the mutated exponential is interpreted as a continuous function of the Lie algebra into some isotope of the corresponding linear Lie group. The second part of this paper is concerned with the representation and deformation of a Lie-admissible algebra. The second cohomology group of a Lie-admissible algebra is introduced as a generalization of those of associative and Lie algebras in the Hochschild and Chevalley-Eilenberg theory. Some elementary theory of algebraic deformation of Lie-admissible algebras is discussed in view of generalization of that of associative and Lie algebras. Lie-admissible deformations are also suggested by the representation of Lie-admissible algebras. Some explicit examples of Lie-admissible deformation are given in terms of the (p,q)-mutation of associative deformation of an associative algebra. Finally, we discuss Lie-admissible deformations of order one

  17. Improved image registration by sparse patch-based deformation estimation.

    Science.gov (United States)

    Kim, Minjeong; Wu, Guorong; Wang, Qian; Lee, Seong-Whan; Shen, Dinggang

    2015-01-15

    Despite intensive efforts for decades, deformable image registration is still a challenging problem due to the potential large anatomical differences across individual images, which limits the registration performance. Fortunately, this issue could be alleviated if a good initial deformation can be provided for the two images under registration, which are often termed as the moving subject and the fixed template, respectively. In this work, we present a novel patch-based initial deformation prediction framework for improving the performance of existing registration algorithms. Our main idea is to estimate the initial deformation between subject and template in a patch-wise fashion by using the sparse representation technique. We argue that two image patches should follow the same deformation toward the template image if their patch-wise appearance patterns are similar. To this end, our framework consists of two stages, i.e., the training stage and the application stage. In the training stage, we register all training images to the pre-selected template, such that the deformation of each training image with respect to the template is known. In the application stage, we apply the following four steps to efficiently calculate the initial deformation field for the new test subject: (1) We pick a small number of key points in the distinctive regions of the test subject; (2) for each key point, we extract a local patch and form a coupled appearance-deformation dictionary from training images where each dictionary atom consists of the image intensity patch as well as their respective local deformations; (3) a small set of training image patches in the coupled dictionary are selected to represent the image patch of each subject key point by sparse representation. Then, we can predict the initial deformation for each subject key point by propagating the pre-estimated deformations on the selected training patches with the same sparse representation coefficients; and (4) we

  18. EL CRONOTOPO DE LA EXCLUSIÓN EN TRES NOVELAS DE LA GENERACIÓN DEL 38

    Directory of Open Access Journals (Sweden)

    Cristian Montes

    2008-11-01

    Full Text Available Se propone aquí la existencia, en tres novelas de la generación del 38, de un cronotopo de exclusión que caracteriza la representación de la ciudad. Dicho cronotopo tensiona y fracciona el propósito de integración social del discurso nacionalista.This article analyzes three novels of the Generation of the year 1938 and proposes the existence of a chronotope of exclusion that characterizes the representation of the city. This chronotope places stress upon and finally destroys the social integration attempted by the nationalist discourse.

  19. Editorial "La Revista lngeniería Industrial a tres años de su lanzamiento".

    Directory of Open Access Journals (Sweden)

    Iván Santelices Malfanti

    2004-07-01

    Full Text Available La Revista lngeniería Industrial a tres años de su lanzamiento se ha consolidado como una revista de divulgación cientffica y académica, y pretende ser una herramienta de cambio. No se puede hablar de cambio si no se promueve a las personas que tienen ideas para informar sobre lo que está produciendo a través de sus escritos. En un pasado no muy lejano, los actuales talentos tuvieron que sortear una serie de dificultades, la competencia era poca y se estimulaba a los jovenes dandoles espacio junto a los ya destacados.

  20. Discrete kinematic modeling of the 3-D deformation of sedimentary basins; Modelisation cinematique discrete de la deformation 3D des bassins sedimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Cornu, T.

    2001-01-01

    The present work deals with three-dimensional deformation of sedimentary basins. The main goal of the work was to propose new ways to study tectonic deformation and to insert it into basin-modeling environment for hydrocarbon migration applications. To handle the complexity of the deformation, the model uses kinematic laws, a discrete approach, and the construction of a code that allows the greatest diversity in the deformation mechanisms we can take into account. The 3-D-volume deformation is obtained through the calculation of the behavior of the neutral surface of each basin layer. The main idea is to deform the neutral surface of each layer with the help of geometrical laws and to use the result to rebuild the volume deformation of the basin. The constitutive algorithm includes three characteristic features. The first one deals with the mathematical operator we use to describe the flexural-slip mechanism which is a combination of the translation of the neutral surface nodes and the rotation of the vertical edges attached to these nodes. This performs the reversibility that was required for the basin modeling. The second one is about. the use of a discrete approach, which gives a better description of the global deformation and offers to locally control volume evolutions. The knowledge of volume variations can become a powerful tool in structural geology analysis and the perfect complement for a field study. The last one concerns the modularity of the developed code. Indeed, the proposed model uses three main mechanisms of deformation. But the architecture of the code allows the insertion of new mechanisms or a better interaction between them. The model has been validated first with 2-D cases, then with 3-D natural cases. They give good results from a qualitative point of view. They also show the capacity of the model to provide a deformation path that is geologically acceptable, and its ability to control the volume variations of the basin through the

  1. The minimally invasive spinal deformity surgery algorithm: a reproducible rational framework for decision making in minimally invasive spinal deformity surgery.

    Science.gov (United States)

    Mummaneni, Praveen V; Shaffrey, Christopher I; Lenke, Lawrence G; Park, Paul; Wang, Michael Y; La Marca, Frank; Smith, Justin S; Mundis, Gregory M; Okonkwo, David O; Moal, Bertrand; Fessler, Richard G; Anand, Neel; Uribe, Juan S; Kanter, Adam S; Akbarnia, Behrooz; Fu, Kai-Ming G

    2014-05-01

    Minimally invasive surgery (MIS) is an alternative to open deformity surgery for the treatment of patients with adult spinal deformity. However, at this time MIS techniques are not as versatile as open deformity techniques, and MIS techniques have been reported to result in suboptimal sagittal plane correction or pseudarthrosis when used for severe deformities. The minimally invasive spinal deformity surgery (MISDEF) algorithm was created to provide a framework for rational decision making for surgeons who are considering MIS versus open spine surgery. A team of experienced spinal deformity surgeons developed the MISDEF algorithm that incorporates a patient's preoperative radiographic parameters and leads to one of 3 general plans ranging from MIS direct or indirect decompression to open deformity surgery with osteotomies. The authors surveyed fellowship-trained spine surgeons experienced with spinal deformity surgery to validate the algorithm using a set of 20 cases to establish interobserver reliability. They then resurveyed the same surgeons 2 months later with the same cases presented in a different sequence to establish intraobserver reliability. Responses were collected and tabulated. Fleiss' analysis was performed using MATLAB software. Over a 3-month period, 11 surgeons completed the surveys. Responses for MISDEF algorithm case review demonstrated an interobserver kappa of 0.58 for the first round of surveys and an interobserver kappa of 0.69 for the second round of surveys, consistent with substantial agreement. In at least 10 cases there was perfect agreement between the reviewing surgeons. The mean intraobserver kappa for the 2 surveys was 0.86 ± 0.15 (± SD) and ranged from 0.62 to 1. The use of the MISDEF algorithm provides consistent and straightforward guidance for surgeons who are considering either an MIS or an open approach for the treatment of patients with adult spinal deformity. The MISDEF algorithm was found to have substantial inter- and

  2. Relationship between Postural Deformities and Frontal Function in Parkinson's Disease

    OpenAIRE

    Ninomiya, Satoko; Morita, Akihiko; Teramoto, Hiroko; Akimoto, Takayoshi; Shiota, Hiroshi; Kamei, Satoshi

    2015-01-01

    Postural deformities and executive dysfunction (ED) are common symptoms of Parkinson's disease (PD); however, the relationship between postural deformities and ED in patients with PD remains unclear. This study assessed the relationship between postural deformities and ED in patients with PD. Sixty-five patients with sporadic PD were assessed for the severity of postural deformities and executive function. The severity of postural deformities was scored using the United Parkinson's Disease Ra...

  3. Efecto de dos enraizadores en tres especies forestales promisorias para la recuperación de suelos

    Directory of Open Access Journals (Sweden)

    Luz Adriana Giraldo C.

    2009-12-01

    Full Text Available La erosión es uno de los principales problemas que afecta los suelos de ladera en el mundo. Algunas de las especies utilizadas en obras de bioingeniería se propagan por medio de estacas, sin embargo no todas enraízan fácilmente, por lo que es necesario utilizar sustancias inductoras de enraizamiento. En este trabajo, evaluamos dos sustancias promotoras de enraizamiento en estacas de mataratón (Gliricidia sepium, nacedero (Trichanthera gigantea y sauce (Salix humboldtiana. La investigación se realizó en el municipio de Dosquebradas, Risaralda, a una altitud de 1450 m. Los tratamientos consistieron en la aplicación de un enraizador de síntesis (Hormonagro®, un enraizador natural (extracto de Aloe vera y un testigo sin aplicación de inductores. Los resultados obtenidos indican que para las tres especies es necesario emplear estimuladores de enraizamiento. El extracto de A. Vera produjo un mejor efecto sobre el enraizamiento de las tres especies, siendo más notorio sobre S. humboldtiana, 60 días después de la aplicación. La especie T. gigantea no mostró diferencias significativas con respecto a la aplicación de estimulantes de enraizamiento. En cuanto a la tolerancia de las especies al encharcamiento del sustrato de siembra, S. humboldtiana presentó mayor tolerancia mientras que T. gigantea presento los mayores problemas de pudrición.

  4. Multi-trace deformations in AdS/CFT. Exploring the vacuum structure of the deformed CFT

    Energy Technology Data Exchange (ETDEWEB)

    Papadimitriou, I. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)]|[Center for Mathematical Physics, Hamburg (Germany)

    2007-03-15

    We present a general and systematic treatment of multi-trace deformations in the AdS/CFT correspondence in the large N limit, pointing out and clarifying subtleties relating to the formulation of the boundary value problem on a conformal boundary. We then apply this method to study multi-trace deformations in the presence of a scalar VEV, which requires the coupling to gravity to be taken into account. We show that supergravity solutions subject to 'mixed' boundary conditions are in one-to-one correspondence with critical points of the holographic effective action of the dual theory in the presence of a multi-trace deformation, and we find a number of new exact analytic solutions involving a minimally or conformally coupled scalar field satisfying 'mixed' boundary conditions. These include the generalization to any dimension of the instanton solution recently found in hep-th/0611315. Finally, we provide a systematic method for computing the holographic effective action in the presence of a multi-trace deformation in a derivative expansion away from the conformal vacuum using Hamilton-Jacobi theory. Requiring that this effective action exists and is bounded from below reproduces recent results on the stability of the AdS vacuum in the presence of 'mixed' boundary conditions. (orig.)

  5. Multi-trace deformations in AdS/CFT. Exploring the vacuum structure of the deformed CFT

    International Nuclear Information System (INIS)

    Papadimitriou, I.

    2007-03-01

    We present a general and systematic treatment of multi-trace deformations in the AdS/CFT correspondence in the large N limit, pointing out and clarifying subtleties relating to the formulation of the boundary value problem on a conformal boundary. We then apply this method to study multi-trace deformations in the presence of a scalar VEV, which requires the coupling to gravity to be taken into account. We show that supergravity solutions subject to 'mixed' boundary conditions are in one-to-one correspondence with critical points of the holographic effective action of the dual theory in the presence of a multi-trace deformation, and we find a number of new exact analytic solutions involving a minimally or conformally coupled scalar field satisfying 'mixed' boundary conditions. These include the generalization to any dimension of the instanton solution recently found in hep-th/0611315. Finally, we provide a systematic method for computing the holographic effective action in the presence of a multi-trace deformation in a derivative expansion away from the conformal vacuum using Hamilton-Jacobi theory. Requiring that this effective action exists and is bounded from below reproduces recent results on the stability of the AdS vacuum in the presence of 'mixed' boundary conditions. (orig.)

  6. Elevated temperature cyclic deformation of stainless-steel and interaction effects with other modes of deformation

    International Nuclear Information System (INIS)

    Turner, A.P.L.

    1976-01-01

    Since pertinent information concerning the deformation history of a material is stored in its current structure, an attempt has been made to determine the number of state variables necessary to uniquely describe the material's present condition. An experimental program has been carried out to determine the number of state variables which is required to describe the tensile test, cyclic, and creep behavior of 304 stainless steel at elevated temperature. Tests have been conducted at 300 0 C and 560 0 C which correspond to homologous temperatures of 1 / 3 and 1 / 2 , respectively. The experiments consisted of subjecting samples to deformation histories during which the mode of deformation was changed so that two material responses could be measured for the same state of the material. Results strongly suggest that at least two state variables are necessary

  7. The effect of lipocortin 1 on neutrophil deformability

    Directory of Open Access Journals (Sweden)

    E. M. Drost

    1996-01-01

    Full Text Available Lipocortn 1 (Lc1 is an anti-inflammatory protein, which, given systemically, inhibits polymorphonuclear neutrophil (PMN emigration from the circulation to sites of inflammation; delivery of Lc1 to the inflamed site is ineffective. We have examined the effect of Lc1 on changes in PMN deformability, and observed a consistent improvement in the deformability of unstimulated PMN; N-formyl-methionyl-leucyl-phenylalanine (fMLP-activated cell deformability was unaltered. A Lc1-induced increase in cell deformability may reduce PMN sequestration so contributing to the anti-migratory effects of systemic Lc1 previously demonstrated in vivo.

  8. Structure of deformed metals. Struktura deformirovannykh metallov

    Energy Technology Data Exchange (ETDEWEB)

    Bernshtein, M L

    1977-01-01

    A teaching aid for students at metallurgical and machine-building institutions of higher learning. It can also be used by engineering-technical personnel and scientists. A presentation is made of physical concepts on the mechanism of plastic deformation and its effect on fine structure, structure and properties of metals and alloys. An examination is made of the processes of recovery, polygonization and recrystallization during the heating of cold-deformed metals. The influence of thermal deformation is described to account for the interaction between admixture atoms and dislocations, phase and structural transformations. An examination is made of the phenomenon of superplasticity. Special attention is given to the process of hot deformation. An analysis is made of phenomena at the basis of hardening steel as a result of thermo-mechanical processing, including controlled rolling.

  9. Factores de riesgo psicosocial laborales, apoyo social y síndrome de Burnout en médicos de familia de tres instituciones públicas de salud de Guadalajara (México

    Directory of Open Access Journals (Sweden)

    Carolina Aranda Beltrán

    2013-01-01

    Full Text Available Objetivo: Analizar los riesgos psicosociales laborales negativos y el apoyo social como incidentes del síndrome de Burnout en los médicos de familia que laboran en tres institu- ciones públicas de salud en Guadalajara (México. Materiales y métodos: El estudio fue descriptivo, analítico y comparativo. La población estuvo constituida por los médicos de familia de base de las tres instituciones, nombradas como institución 1, 2 y 3. Se emplearon tres instrumentos de evaluación: la Guía de Identificación de Factores Psicosociales del Instituto Mexicano del Seguro Social, el Inventario de Recursos Sociales de Díaz Veiga modificado y la escala de valoración de Maslach Burnout Inventory (MBI. Resultados: En general se obtuvo un adecuado o buen apoyo social en las tres instituciones. Las prevalencias para lo factores psicosociales negativos fueron mayores para la institución 3 (33,64 %, mientras que para el síndrome de Burnout la institución 1 mostró mayores porcentajes (43,5 %. Se obtuvieron algunas asociaciones significativas entre las variables de estudio. Conclusión: Es necesario reorganizar ciertas condiciones laborales, específicamente las enfocadas a las tareas laborales, para la prevención y disminución de la presencia del síndrome de Burnout.

  10. Deformation mechanisms of nanotwinned Al

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xinghang [Texas A & M Univ., College Station, TX (United States)

    2016-11-10

    The objective of this project is to investigate the role of different types of layer interfaces on the formation of high density stacking fault (SF) in Al in Al/fcc multilayers, and understand the corresponding deformation mechanisms of the films. Stacking faults or twins can be intentionally introduced (via growth) into certain fcc metals with low stacking fault energy (such as Cu, Ag and 330 stainless steels) to achieve high strength, high ductility, superior thermal stability and good electrical conductivity. However it is still a major challenge to synthesize these types of defects into metals with high stacking fault energy, such as Al. Although deformation twins have been observed in some nanocrystalline Al powders by low temperature, high strain rate cryomilling or in Al at the edge of crack tip or indentation (with the assistance of high stress intensity factor), these deformation techniques typically introduce twins sporadically and the control of deformation twin density in Al is still not feasible. This project is designed to test the following hypotheses: (1) Certain type of layer interfaces may assist the formation of SF in Al, (2) Al with high density SF may have deformation mechanisms drastically different from those of coarse-grained Al and nanotwinned Cu. To test these hypotheses, we have performed the following tasks: (i) Investigate the influence of layer interfaces, stresses and deposition parameters on the formation and density of SF in Al. (ii) Understand the role of SF on the deformation behavior of Al. In situ nanoindentation experiments will be performed to probe deformation mechanisms in Al. The major findings related to the formation mechanism of twins and mechanical behavior of nanotwinned metals include the followings: 1) Our studies show that nanotwins can be introduced into metals with high stacking fault energy, in drastic contrast to the general anticipation. 2) We show two strategies that can effectively introduce growth twins in

  11. Deformation mechanisms of nanotwinned Al

    International Nuclear Information System (INIS)

    Zhang, Xinghang

    2016-01-01

    The objective of this project is to investigate the role of different types of layer interfaces on the formation of high density stacking fault (SF) in Al in Al/fcc multilayers, and understand the corresponding deformation mechanisms of the films. Stacking faults or twins can be intentionally introduced (via growth) into certain fcc metals with low stacking fault energy (such as Cu, Ag and 330 stainless steels) to achieve high strength, high ductility, superior thermal stability and good electrical conductivity. However it is still a major challenge to synthesize these types of defects into metals with high stacking fault energy, such as Al. Although deformation twins have been observed in some nanocrystalline Al powders by low temperature, high strain rate cryomilling or in Al at the edge of crack tip or indentation (with the assistance of high stress intensity factor), these deformation techniques typically introduce twins sporadically and the control of deformation twin density in Al is still not feasible. This project is designed to test the following hypotheses: (1) Certain type of layer interfaces may assist the formation of SF in Al, (2) Al with high density SF may have deformation mechanisms drastically different from those of coarse-grained Al and nanotwinned Cu. To test these hypotheses, we have performed the following tasks: (i) Investigate the influence of layer interfaces, stresses and deposition parameters on the formation and density of SF in Al. (ii) Understand the role of SF on the deformation behavior of Al. In situ nanoindentation experiments will be performed to probe deformation mechanisms in Al. The major findings related to the formation mechanism of twins and mechanical behavior of nanotwinned metals include the followings: 1) Our studies show that nanotwins can be introduced into metals with high stacking fault energy, in drastic contrast to the general anticipation. 2) We show two strategies that can effectively introduce growth twins in

  12. Localization in Naturally Deformed Systems - the Default State?

    Science.gov (United States)

    Clancy White, Joseph

    2017-04-01

    Based on the extensive literature on localized rock deformation, conventional wisdom would interpret it to be a special behaviour within an anticipated background of otherwise uniform deformation. The latter notwithstanding, the rock record is so rife with transient (cyclic), heterogeneous deformation, notably shear localization, as to characterize localization as the anticipated 'normal' behaviour. The corollary is that steady, homogeneous deformation is significantly less common, and if achieved must reflect some special set of conditions that are not representative of the general case. An issue central to natural deformation is then not the existance of localized strain, but rather how the extant deformation processes scale across tectonic phenomena and in turn organize to enable a coherent(?) descripion of Earth deformation. Deformation is fundamentally quantized, discrete (diffusion, glide, crack propagation) and reliant on the defect state of rock-forming minerals. The strain energy distribution that drives thermo-mechanical responses is in the first instance established at the grain-scale where the non-linear interaction of defect-mediated micromechanical processes introduces heterogeneous behaviour described by various gradient theories, and evidenced by the defect microstructures of deformed rocks. Hence, the potential for non-uniform response is embedded within even quasi-uniform, monomineralic materials, seen, for example, in the spatially discrete evolution of dynamic recrystallization. What passes as homogeneous or uniform deformation at various scales is the aggregation of responses at some characteristic dimension at which heterogeneity is not registered or measured. Nevertheless, the aggregate response and associated normalized parameters (strain, strain rate) do not correspond to any condition actually experienced by the deforming material. The more common types of macroscopic heterogeneity promoting localization comprise mechanically contrasting

  13. α-clustering and triaxial deformations in 40Ca

    International Nuclear Information System (INIS)

    Taniguchi, Yasutaka; Kimura, Masaaki; Kanada-En'yo, Yoshiko; Horiuchi, Hisashi

    2007-01-01

    We have studied the positive-parity states of 40 Ca using antisymmetrized molecular dynamics (AMD) and the generator coordinate method (GCM). Imposing two different kinds of constraints on the variational calculation, we have found various kinds of 40 Ca structures such as a deformed-shell structure, as well as α- 36 Ar and 12 C- 28 Si cluster structures. After the GCM calculation, we obtained a normal-deformed band and a superdeformed band together with their side bands associated with triaxial deformation. The calculated B(E2) values agreed well with empirical data. It was also found that the normal-deformed and superdeformed bands contain α- 36 Ar and 12 C- 28 Si cluster structure components, respectively. This leads to the presence of an α- 36 Ar higher-nodal band occurring above the normal-deformed band

  14. Composición de especies y diversidad de peces en tres cuerpos de agua en la cuenca alta del río Itaya

    Directory of Open Access Journals (Sweden)

    Javier del Águila Chávez

    2013-06-01

    Full Text Available En el presente trabajo se describe sobre la diversidad en tres cuerpos de agua de la cuenca alta del río Itaya, concesión de conservación de la universidad científica del Perú, en una evaluación rápida en los meses de junio y julio del 2012. Se colectaron datos y muestras de peces en Lamas cocha (LC, cocha Anguilla (CA y Tipishca Luz de Oriente (TLO. Los peces fueron colectados utilizando una batería de redes de diferentes medidas 1.5, 2, 2.5, 3, 3.5 y 4 pulgadas de de abertura de malla. Se reportan 17 familias taxonómicas, de las cuales 9 familias pertenecen al orden Characiformes (53%, 3 familias pertenecen al orden de los Siluriformes (17%, 2 familias pertenecen al orden de los Gymnotiformes (12% y al orden Perciformes (12% y una familia pertenece al orden Beloniformes (6%. La predominancia de las familias taxonómicas en los tres ambientes fueron Characidae, Curimatidae, Acestrorhynchidae (Characiformes y Cichlidae (Perciformes. Sin embargo, la ocurrencia de exclusividad de una determinada familia fue observada en los tres cuerpos de aguas; tenemos de esta forma la familia Hemiodontidae solo tienen ocurrencia en Lamas cocha, la ocurrencia de la familia Prochilodontidae (Characiformes y Callichthyidae (Siluriformes en Cocha Anguillal y finalmente la ocurrencia de las familias Pimelodidae (Siluriformes, Sciaenidae (Perciformes y Belonidae (Beloniformes en la Tipishca Luz de Oriente.

  15. Composición de especies y diversidad de peces en tres cuerpos de agua en la cuenca alta del río Itaya

    Directory of Open Access Journals (Sweden)

    Javier del Águila Chávez

    2013-06-01

    Full Text Available En el presente trabajo se describe sobre la diversidad en tres cuerpos de agua de la cuenca alta del río Itaya, concesión de conservación de la universidad científica del Perú, en una evaluación  rápida en los meses de junio y julio del 2012. Se colectaron datos y muestras de peces en Lamas cocha (LC, cocha Anguilla (CA y Tipishca Luz de Oriente (TLO. Los peces fueron colectados utilizando una batería de redes de diferentes medidas 1.5, 2, 2.5, 3, 3.5 y 4 pulgadas de de abertura de malla. Se reportan 17 familias taxonómicas, de las cuales 9 familias pertenecen al orden Characiformes (53%, 3 familias pertenecen al orden de los Siluriformes (17%, 2 familias pertenecen al orden de los Gymnotiformes (12%  y al orden Perciformes (12% y una familia pertenece al orden Beloniformes (6%. La predominancia de las familias taxonómicas en los tres ambientes fueron Characidae, Curimatidae, Acestrorhynchidae (Characiformes y Cichlidae (Perciformes. Sin embargo, la ocurrencia de exclusividad de una determinada familia fue observada en los tres cuerpos de aguas; tenemos de esta forma la familia Hemiodontidae solo tienen ocurrencia en Lamas cocha, la ocurrencia de la familia Prochilodontidae (Characiformes y Callichthyidae (Siluriformes en Cocha Anguillal y finalmente la ocurrencia de las familias Pimelodidae (Siluriformes, Sciaenidae (Perciformes y Belonidae (Beloniformes en la Tipishca Luz de Oriente.

  16. Electron form factors of deformable nuclei

    International Nuclear Information System (INIS)

    Tartakovskii, V.K.; Isupov, V.Yu.

    1988-01-01

    Using the smallness of the deformation parameter of the nucleus, we obtain simple explicit expressions for the form factors of electroexcitation of the low-lying rotation-vibration states of light, deformable, even-even nuclei. The expressions satisfactorily describe the experimental data on the excitation of collective nuclear states by the inelastic scattering of fast electrons

  17. Hacia una interpretación comprensiva de Sor Juana. Tres loas y la cifra del mundo

    OpenAIRE

    Cortijo Ocaña, Antonio

    2016-01-01

    Sor Juana Inés de la Cruz dedica gran parte de su obra al desciframiento del aparente laberinto de la realidad. Como intelectual, se imagina a sí misma como una segunda Proba, en sus funciones de intérprete, traductora y transmisora que, como Atanasio Kircher, ha de establecer correspondencias y similitudes. En Sor Juana América se convierte en tema de análisis y estudio, como puede apreciarse en particular en su Neptuno alegórico y en las loas a sus tres autos sacramentales: El divino Narcis...

  18. Diversidad de tres gremios de hormigas en cafetales de sombra, de sol y bosques de Risaralda

    OpenAIRE

    RIVERA, LEONARDO; ARMBRECHT, INGE

    2005-01-01

    Durante 2001-2002 se realizó un estudio de la mirmecofauna (Hymenoptera: Formicidae) en cafetales del municipio de Apía (Risaralda), para evaluar el impacto que las técnicas modernas de cultivo de café tienen sobre la biodiversidad asociada. Se seleccionaron 12 fincas clasificadas en tres sistemas de manejo de sombra de café (tratamientos) y un control compuesto por parches de bosque. Se ubicaron 20 parcelas de 1 m² por finca en las cuales se realizó colecta manual de hormigas en hojarasca y ...

  19. COMPARACIÓN DE HABILIDADES SOCIALES Y AJUSTE PSICOLÓGICO EN NIÑOS MEXICANOS DE TRES CONDICIONES

    OpenAIRE

    Claudia González Fragoso; Amada Ampudia Rueda; Yolanda Guevara Benítez

    2014-01-01

    Las habilidades sociales en la infancia guardan una estrech a relación con aspectos como autoestima, ansiedad y depresión. Tales variables son indicadoras del ajuste psicológico, que puede alterarse en los niños que son víctimas de violencia o que viven en institucion es. Para contar con datos sobre niños mexicanos, el presente estudio exploratorio evaluó y comparó los niveles mostrados en habilidades sociales, autoestima, ansiedad y depresión en tres grupos de niños que se hallaban en cond...

  20. Mejoras ambientales para el desarrollo de la competitividad en tres cadenas agroalimentarias costarricenses. (SDT 001-2008)

    OpenAIRE

    Hartley, Marjorie; Díaz, Rafael

    2008-01-01

    Este documento de trabajo presenta los resultados de la aplicación de la Evaluación de Ciclo de Vida (LCA por sus siglas en inglés) a tres agrocadenas costarricenses, la de melón, chayote y café. El objetivo es identificar y cuantificar los impactos ambientales y sobre la salud humana, más importantes a lo largo de estas agrocadenas, distinguiéndolos por segmentos. La aplicación del LCA permite evaluar el perfil ambiental de las agrocadenas "desde la cuna hasta la tumba" para identific...

  1. Calidad de los procesos académicos en tres maestrías en educación

    OpenAIRE

    Márquez Vargas, Florentino; Pedraza Ortiz, Alexandra Patricia

    2015-01-01

    La presente investigación buscó caracterizar las condiciones de calidad de los procesos académicos de tres Maestrías en Educación en Colombia, a partir de lo expresado por estudiantes, profesores, directores y documentos institucionales. Lo anterior implicó delimitar el concepto de calidad en los postgrados, en el contexto de la política pública; identificar los factores que fomentan la investigación, la flexibilidad del currículo, las prácticas de enseñanza y aprendizaje y la permanencia; y ...

  2. Deformation compatibility control for engineering structures methods and applications

    CERN Document Server

    Zhu, Hanhua; Chen, Mengchong; Deng, Jianliang

    2017-01-01

    This book presents essential methods of deformation compatibility control, and explicitly addresses the implied conditions on the methods’ deformation compatibility. Consequently, these conditions can be considered in engineering structure design, while the conditions on stable equilibrium can be taken into account in the design method. Thus, the designed deformation and the actual deformation of the respective structure are approximately identical, guaranteeing both the flexibility of the construction material in force transmission and the equilibrium of force in the structure. Though equilibrium theory in engineering structures has been extensively studied, there has been comparatively little research on compatibility. In the limited researches available, the topics are primarily the theories and assumptions on the deformation compatibility, while few systematic works focus on the mechanical theoretical principles and methods of deformation compatibility control. As such, the flexibility of the constructi...

  3. Bridge continuous deformation measurement technology based on fiber optic gyro

    Science.gov (United States)

    Gan, Weibing; Hu, Wenbin; Liu, Fang; Tang, Jianguang; Li, Sheng; Yang, Yan

    2016-03-01

    Bridge is an important part of modern transportation systems and deformation is a key index for bridge's safety evaluation. To achieve the long span bridge curve measurement rapidly and timely and accurately locate the bridge maximum deformation, the continuous deformation measurement system (CDMS) based on inertial platform is presented and validated in this paper. Firstly, based on various bridge deformation measurement methods, the method of deformation measurement based on the fiber optic gyro (FOG) is introduced. Secondly, the basic measurement principle based on FOG is presented and the continuous curve trajectory is derived by the formula. Then the measurement accuracy is analyzed in theory and the relevant factors are presented to ensure the measurement accuracy. Finally, the deformation measurement experiments are conducted on a bridge across the Yangtze River. Experimental results show that the presented deformation measurement method is feasible, practical, and reliable; the system can accurately and quickly locate the maximum deformation and has extensive and broad application prospects.

  4. The prevalence of predisposing deformity in osteoarthritic hip joints

    DEFF Research Database (Denmark)

    Klit, Jakob; Gosvig, Kasper; Jacobsen, Steffen

    2011-01-01

    relationship in both sexes with the clinical presentation. The study cohort which fulfilled these inclusion criteria consisted of 322 females (149 right hips and 173 left hips) and 162 males (77 right hips and 85 left hips) with osteoarthritis. We found an overall prevalence of predisposing hip deformities...... in females of 62.4% and in males of 78.9%. Minor and major deformities showed the same prevalence. Both sexes had a comparable prevalence of minor and major hip joint deformity, except for pistol grip deformity, which was more prevalent in men. We concluded that 'idiopathic osteoarthritis' is uncommon......, and that even minor predisposing deformities are associated with hip osteoarthritis....

  5. Alpha- and Omega-Deformations from fluxes in M-Theory

    CERN Document Server

    Lambert, Neil; Reffert, Susanne

    2014-01-01

    We discuss an SL(2,R) family of deformed N=2 four-dimensional gauge theories which we derive from a flux background in M-theory. In addition to the Omega-deformation this family includes a new deformation, which we call the Alpha-deformation, which can be viewed as an S-dual to the Omega-deformation. We study these gauge theories in two ways: by constructing a non-Abelian (but UV-complete) Lagrangian, and by their strong coupling lift to M-theory where their low-energy dynamics can be determined by examining the equation of motion of a single M5-brane wrapped on a Riemann surface.

  6. Accesibilidad en el ámbito de la salud materna de mujeres rurales de tres localidades del norte argentino

    Directory of Open Access Journals (Sweden)

    Fernando Landini

    2015-12-01

    Full Text Available Si bien las mujeres rurales poseen mayor riesgo de morir por causas relacionadas con el embarazo, el parto y puerperio, los estudios que abordan el tema suelen prestar escasa atención a la variable 'ruralidad'. Se realizó un estudio comparativo de tres casos apoyado en un abordaje cualitativo orientado a identificar, describir y analizar las barreras de orden geográfico, económico y administrativo que limitan el acceso de mujeres rurales al sistema público de salud en el ámbito de la salud materna. Se seleccionaron tres territorios de diferentes provincias del norte argentino: el municipio de Goya (provincia de Corrientes, el municipio de Dos Arroyos (provincia de Misiones y la comuna de Ranchillos (provincia de Tucumán. En cada caso se realizaron 15 entrevistas, en su mayoría a mujeres rurales y a profesionales que atienden en el ámbito de la salud materna. Las entrevistas fueron transcriptas y los textos categorizados a partir de ejes temáticos expresados en los objetivos de la investigación. Se concluye que existen importantes barreras de accesibilidad que articulan problemas de nivel geográfico, económico y administrativo en ámbitos rurales.

  7. Large shear deformation of particle gels studied by Brownian Dynamics simulations

    NARCIS (Netherlands)

    Rzepiela, A.A.; Opheusden, van J.H.J.; Vliet, van T.

    2002-01-01

    This paper focuses on shear deformation of particle gels. Two different methods of shear deformation are discussed, namely affine and non-affine deformation, the second being novel in simulation studies of gels. Non-affine deformation resulted in a slower increase of the stress at small deformation.

  8. Treatment of hallux valgus deformity.

    Science.gov (United States)

    Fraissler, Lukas; Konrads, Christian; Hoberg, Maik; Rudert, Maximilian; Walcher, Matthias

    2016-08-01

    Hallux valgus deformity is a very common pathological condition which commonly produces painful disability. It is characterised as a combined deformity with a malpositioning of the first metatarsophalangeal joint caused by a lateral deviation of the great toe and a medial deviation of the first metatarsal bone.Taking the patient's history and a thorough physical examination are important steps. Anteroposterior and lateral weight-bearing radiographs of the entire foot are crucial for adequate assessment in the treatment of hallux valgus.Non-operative treatment of the hallux valgus cannot correct the deformity. However, insoles and physiotherapy in combination with good footwear can help to control the symptoms.There are many operative techniques for hallux valgus correction. The decision on which surgical technique is used depends on the degree of deformity, the extent of degenerative changes of the first metatarsophalangeal joint and the shape and size of the metatarsal bone and phalangeal deviation. The role of stability of the first tarsometatarsal joint is controversial.Surgical techniques include the modified McBride procedure, distal metatarsal osteotomies, metatarsal shaft osteotomies, the Akin osteotomy, proximal metatarsal osteotomies, the modified Lapidus fusion and the hallux joint fusion. Recently, minimally invasive percutaneous techniques have gained importance and are currently being evaluated more scientifically.Hallux valgus correction is followed by corrective dressings of the great toe post-operatively. Depending on the procedure, partial or full weight-bearing in a post-operative shoe or cast immobilisation is advised. Post-operative radiographs are taken in regular intervals until osseous healing is achieved. Cite this article: Fraissler L, Konrads C, Hoberg M, Rudert M, Walcher M. Treatment of hallux valgus deformity. EFORT Open Rev 2016;1:295-302. DOI: 10.1302/2058-5241.1.000005.

  9. Texture and deformation mechanism of yttrium

    International Nuclear Information System (INIS)

    Adamesku, R.A.; Grebenkin, S.V.; Stepanenko, A.V.

    1992-01-01

    X-ray pole figure analysis was applied to study texture and deformation mechanism in pure and commercial polycrystalline yttrium on cold working. It was found that in cast yttrium the texture manifected itself weakly enough both for pure and commercial metal. Analysis of the data obtained made it possible to assert that cold deformation of pure yttrium in the initial stage occurred mainly by slip the role of which decreased at strains higher than 36%. The texture of heavily deformed commercial yttrium contained two components, these were an 'ideal' basic orientation and an axial one with the angle of inclination about 20 deg. Twinning mechanism was revealed to be also possible in commercial yttrium

  10. The thermal and mechanical deformation study of up-stream pumping mechanical seal

    International Nuclear Information System (INIS)

    Chen, H L; Xu, C; Zuo, M Z; Wu, Q B

    2015-01-01

    Taking the viscosity-temperature relationship of the fluid film into consideration, a 3-D numerical model was established by ANSYS software which can simulate the heat transfer between the upstream pumping mechanical seal stationary and rotational rings and the fluid film between them as well as simulate the thermal deformation, structure deformation and the coupling deformation of them. According to the calculation result, thermal deformation causes the seal face expansion and the maximum thermal deformation appears at the inside of the seal ring. Pressure results in a mechanical deformation, the maximum deformation occurs at the top of the spiral groove and the overall trend is inward the mating face, opposite to the thermal deformation. The coupling deformation indicate that the thermal deformation can be partly counteracted by pressure deformation. Using this model, the relationship between deformation and shaft speed and the sealing liquid pressure was studied. It's found that the shaft speed will both enhance the thermal and structure deformation and the fluid pressure will enhance the structure deformation but has little to do with the thermal deformation. By changing the sealing material, it's found that material with low thermal expansion coefficient and low elastic modulus will suffer less thermal-pressure deformation

  11. The thermal and mechanical deformation study of up-stream pumping mechanical seal

    Science.gov (United States)

    Chen, H. L.; Xu, C.; Zuo, M. Z.; Wu, Q. B.

    2015-01-01

    Taking the viscosity-temperature relationship of the fluid film into consideration, a 3-D numerical model was established by ANSYS software which can simulate the heat transfer between the upstream pumping mechanical seal stationary and rotational rings and the fluid film between them as well as simulate the thermal deformation, structure deformation and the coupling deformation of them. According to the calculation result, thermal deformation causes the seal face expansion and the maximum thermal deformation appears at the inside of the seal ring. Pressure results in a mechanical deformation, the maximum deformation occurs at the top of the spiral groove and the overall trend is inward the mating face, opposite to the thermal deformation. The coupling deformation indicate that the thermal deformation can be partly counteracted by pressure deformation. Using this model, the relationship between deformation and shaft speed and the sealing liquid pressure was studied. It's found that the shaft speed will both enhance the thermal and structure deformation and the fluid pressure will enhance the structure deformation but has little to do with the thermal deformation. By changing the sealing material, it's found that material with low thermal expansion coefficient and low elastic modulus will suffer less thermal-pressure deformation.

  12. Dynamic skin deformation simulation using musculoskeletal model and soft tissue dynamics

    Institute of Scientific and Technical Information of China (English)

    Akihiko Murai; Q. Youn Hong; Katsu Yamane; Jessica K. Hodgins

    2017-01-01

    Deformation of skin and muscle is essential for bringing an animated character to life. This deformation is difficult to animate in a realistic fashion using traditional techniques because of the subtlety of the skin deformations that must move appropriately for the character design. In this paper, we present an algorithm that generates natural, dynamic, and detailed skin deformation (movement and jiggle) from joint angle data sequences. The algorithm has two steps: identification of parameters for a quasi-static muscle deformation model, and simulation of skin deformation. In the identification step, we identify the model parameters using a musculoskeletal model and a short sequence of skin deformation data captured via a dense marker set. The simulation step first uses the quasi-static muscle deformation model to obtain the quasi-static muscle shape at each frame of the given motion sequence (slow jump). Dynamic skin deformation is then computed by simulating the passive muscle and soft tissue dynamics modeled as a mass–spring–damper system. Having obtained the model parameters, we can simulate dynamic skin deformations for subjects with similar body types from new motion data. We demonstrate our method by creating skin deformations for muscle co-contraction and external impacts from four different behaviors captured as skeletal motion capture data. Experimental results show that the simulated skin deformations are quantitatively and qualitatively similar to measured actual skin deformations.

  13. Dynamic skin deformation simulation using musculoskeletal model and soft tissue dynamics

    Institute of Scientific and Technical Information of China (English)

    Akihiko Murai; Q.Youn Hong; Katsu Yamane; Jessica K.Hodgins

    2017-01-01

    Deformation of skin and muscle is essential for bringing an animated character to life. This deformation is difficult to animate in a realistic fashion using traditional techniques because of the subtlety of the skin deformations that must move appropriately for the character design. In this paper, we present an algorithm that generates natural, dynamic, and detailed skin deformation(movement and jiggle) from joint angle data sequences. The algorithm has two steps: identification of parameters for a quasi-static muscle deformation model, and simulation of skin deformation. In the identification step, we identify the model parameters using a musculoskeletal model and a short sequence of skin deformation data captured via a dense marker set. The simulation step first uses the quasi-static muscle deformation model to obtain the quasi-static muscle shape at each frame of the given motion sequence(slow jump). Dynamic skin deformation is then computed by simulating the passive muscle and soft tissue dynamics modeled as a mass–spring–damper system. Having obtained the model parameters, we can simulate dynamic skin deformations for subjects with similar body types from new motion data. We demonstrate our method by creating skin deformations for muscle co-contraction and external impacts from four different behaviors captured as skeletal motion capture data. Experimental results show that the simulated skin deformations are quantitatively and qualitatively similar to measured actual skin deformations.

  14. Deformation at Lava Lake Volcanoes: Lessons from Karthala

    Science.gov (United States)

    Biggs, J.; Rust, A.; Owens, C.

    2014-12-01

    To remain hot, permanent lava lakes require a continuous connection to a magma reservoir. Depending on the state of the conduit, changes in magma pressure could result in changes in the lake level (hydraulic head) or be accommodated elastically leading to surface deformation. Observing deformation is therefore key to understanding the plumbing system associated with lava lakes. However, the majority of the world's lava lakes lie in difficult socio-economic or remote locations meaning that there are few ground-based observations, and it is often necessary to rely on satellite imagery. Karthala volcano experienced a sequence of eruptions in April 2005, Nov 2005, May 2006 and Jan 2007. The first 3 took place at the Choungou Chahale crater, which typically contains either a water or lava lake; the last formed a new pit crater to the north. Satellite thermal imagery (Hirn et al, 2008) does not show an anomaly during the first eruption, which had a phreatomagmatic component, but large thermal anomalies, associated with an ephemeral lava lake were detected during the Nov 2005 and May 2006 eruptions. The final eruption produced a smaller anomaly attributed to a minor lava flow. Here we present InSAR observations from 2004-2010. We find no significant deformation associated with the first three eruptions, but the January 2007 eruption was associated with ~25 cm of deformation near the volcano's summit, characteristic of a dyke intrusion aligned with the northern rift zone. We also observe an unusual pattern deformation along the coast which may be attributed to rapid settling of soft sediment or recent volcanic deposits triggered by seismic activity. We propose that the first eruption cleared the reservoir-summit connection and interacted with the water in Choungou Chahale. The following eruptions formed a lava lake, but without causing deformation. By the final eruption, the conduit had become blocked and magma intruded along the rift zone causing deformation but no

  15. Relationship between Postural Deformities and Frontal Function in Parkinson’s Disease

    Directory of Open Access Journals (Sweden)

    Satoko Ninomiya

    2015-01-01

    Full Text Available Postural deformities and executive dysfunction (ED are common symptoms of Parkinson’s disease (PD; however, the relationship between postural deformities and ED in patients with PD remains unclear. This study assessed the relationship between postural deformities and ED in patients with PD. Sixty-five patients with sporadic PD were assessed for the severity of postural deformities and executive function. The severity of postural deformities was scored using the United Parkinson’s Disease Rating Scale item 28 score: no postural deformity (0, mild postural deformities (1, or severe postural deformities (2–4. Executive function was assessed using the Behavioral Assessment of the Dysexecutive Syndrome (BADS and an age-controlled standardized BADS score <70 was defined as ED. Age-controlled standardized BADS scores were compared across the three groups using the Kruskal-Wallis test. Relationship between ED and the severity of postural deformities was assessed using the Mann-Whitney U test. Age-controlled standardized BADS score significantly differed among the three groups P=0.005. ED was significantly related to the severity of postural deformities P=0.0005. The severity of postural deformities was associated with a lower age-controlled standardized BADS score and ED, and these findings suggest that postural deformities were associated with frontal dysfunction in patients with PD.

  16. Equilibrium Droplets on Deformable Substrates: Equilibrium Conditions.

    Science.gov (United States)

    Koursari, Nektaria; Ahmed, Gulraiz; Starov, Victor M

    2018-05-15

    Equilibrium conditions of droplets on deformable substrates are investigated, and it is proven using Jacobi's sufficient condition that the obtained solutions really provide equilibrium profiles of both the droplet and the deformed support. At the equilibrium, the excess free energy of the system should have a minimum value, which means that both necessary and sufficient conditions of the minimum should be fulfilled. Only in this case, the obtained profiles provide the minimum of the excess free energy. The necessary condition of the equilibrium means that the first variation of the excess free energy should vanish, and the second variation should be positive. Unfortunately, the mentioned two conditions are not the proof that the obtained profiles correspond to the minimum of the excess free energy and they could not be. It is necessary to check whether the sufficient condition of the equilibrium (Jacobi's condition) is satisfied. To the best of our knowledge Jacobi's condition has never been verified for any already published equilibrium profiles of both the droplet and the deformable substrate. A simple model of the equilibrium droplet on the deformable substrate is considered, and it is shown that the deduced profiles of the equilibrium droplet and deformable substrate satisfy the Jacobi's condition, that is, really provide the minimum to the excess free energy of the system. To simplify calculations, a simplified linear disjoining/conjoining pressure isotherm is adopted for the calculations. It is shown that both necessary and sufficient conditions for equilibrium are satisfied. For the first time, validity of the Jacobi's condition is verified. The latter proves that the developed model really provides (i) the minimum of the excess free energy of the system droplet/deformable substrate and (ii) equilibrium profiles of both the droplet and the deformable substrate.

  17. ESTUDIO Y MODELADO DE UN BRAZO ROBÓTICO LEGO DE TRES GRADOS DE LIBERTAD

    Directory of Open Access Journals (Sweden)

    JAIME ALBERTO GUZMÁN

    2011-12-01

    Full Text Available En este artículo se presenta el estudio y modelado de un brazo robótico lego de tres grados de libertad en asocio con sus respectivos modelos de su cinemática directa e inversa junto con una aproximación al análisis dinámico para la generación de trayectorias de este robot. Las ecuaciones que rigen el movimiento son deducidas de los modelos matemáticos propios a las cadenas cinemáticas y son implementadas en el lenguaje de programación Java y ejecutadas por el robot a través de la extensión Java -LeJOS.

  18. Procesos de evangelización en la Amazonía boliviana. Un drama misionero en tres actos

    Directory of Open Access Journals (Sweden)

    Diego Villar

    2015-06-01

    Full Text Available Se describe primero la «prehistoria» católica del contacto entre los grupos panos de la actual Amazonía boliviana y los misioneros jesuitas, franciscanos y del clero secular. Luego se analiza la continuidad del proceso de evangelización de los chacobos por diversas denominaciones evangélicas, reflejada en tres experiencias misioneras desde 1955 hasta la actualidad. Por último, se proponen algunas reflexiones sobre el problema antropológico de la conversión religiosa.

  19. Evaluation method for the deformation of channel box

    International Nuclear Information System (INIS)

    Sadaoka, Noriyuki; Kumahora, Hiroki; Miki, Kazuyoshi.

    1990-01-01

    In a BWR type nuclear reactor, a channel box undergoes creep deformation due to the effects of a pressure difference between inside and outside of the channel box and a reactor water temperature, which is accelerated by the irradiation of radiation rays and the extent of which depends on the loading position. Then, there are provided a step of determining the extent of the deformation of the channel box in a burning period in the past, a step of setting the loading position for the channel box in the reactor core, a step of forecasting the extent of the deformation of the channel box based on the data of reactor core characteristics, the date of the physical properties of the materials and the shape of the channel box, the data of the loading pattern of fuel assemblies and the extent of deformation, and a step of estimating whether the forecast deforming extent is within an allowable range or not. As a result, the deforming extent for each of the channel boxes can be forecast and, accordingly, the interference with the control rods can be estimated accurately. (N.H.)

  20. ANALYSIS OF DEFORMABILITY OF ANISOTROPIC AGRILLITE CLAYSTONES

    Directory of Open Access Journals (Sweden)

    Ponomaryov Andrey Budimirovicn

    2017-08-01

    Full Text Available In the paper, the results of deformability study of agrillite claystones are used for determination of the Jointed rock model parameters. The number of stamp, pressuremeter and compressive tests allowed to research anisotropic deformability of argillite claystone in vertical and horizontal direction. The following problems were solved during the study: 1 the in-place and laboratory experiments to calculate the anisotropy coefficient were done for anisotropic agrillite claystones with both natural moisture and total water saturation; 2 the deformation parameters were determined and the numerical simulation of the stress-strain state of claystone in field tests was carried out with the use of Plaxis 2D software application; 3 the comparative analysis was done for calculated claystone deformation and the values obtained during the in-place tests. The authors proved that agrillite claystones shows two times less deformation under loading in the horizontal direction than vertically. The ratio is obtained to determine the parameters for numerical simulation of the Jointed Rock model used as a practical tool for analysis of stress-strain behavior of anisotropic soils. The authors provided a recommended practice for consideration of specific properties of argillite claystones when carrying out foundation works.

  1. Dynamics of viscoplastic deformation in amorphous solids

    International Nuclear Information System (INIS)

    Falk, M.L.; Langer, J.S.

    1998-01-01

    We propose a dynamical theory of low-temperature shear deformation in amorphous solids. Our analysis is based on molecular-dynamics simulations of a two-dimensional, two-component noncrystalline system. These numerical simulations reveal behavior typical of metallic glasses and other viscoplastic materials, specifically, reversible elastic deformation at small applied stresses, irreversible plastic deformation at larger stresses, a stress threshold above which unbounded plastic flow occurs, and a strong dependence of the state of the system on the history of past deformations. Microscopic observations suggest that a dynamically complete description of the macroscopic state of this deforming body requires specifying, in addition to stress and strain, certain average features of a population of two-state shear transformation zones. Our introduction of these state variables into the constitutive equations for this system is an extension of earlier models of creep in metallic glasses. In the treatment presented here, we specialize to temperatures far below the glass transition and postulate that irreversible motions are governed by local entropic fluctuations in the volumes of the transformation zones. In most respects, our theory is in good quantitative agreement with the rich variety of phenomena seen in the simulations. copyright 1998 The American Physical Society

  2. Core Characteristics Deterioration due to Plastic Deformation

    Science.gov (United States)

    Kaido, Chikara; Arai, Satoshi

    This paper discusses the effect of plastic deformation at core manufacturing on the characteristics of cores where non-oriented electrical steel sheets are used as core material. Exciting field and iron loss increase proportionally to plastic deformation in the case of rPeddy currents increase because plastic deformations of crystalline grains are distributed and then the flux distribution is induced. In the case of rP>20, the deterioration tend to saturate, and the increases in magnetic field and iron loss are 1000 to 1500A/m and 2 to 4W/kg. They are related to grain size, and high grade with larger grain may have lager field increase and smaller iron loss increase. Anomalous eddy current losses scarcely increase in this region. In actual motors, the plastic deformation affects iron loss increase although exciting current increases a little.

  3. Coupling q-Deformed Dark Energy to Dark Matter

    Directory of Open Access Journals (Sweden)

    Emre Dil

    2016-01-01

    Full Text Available We propose a novel coupled dark energy model which is assumed to occur as a q-deformed scalar field and investigate whether it will provide an expanding universe phase. We consider the q-deformed dark energy as coupled to dark matter inhomogeneities. We perform the phase-space analysis of the model by numerical methods and find the late-time accelerated attractor solutions. The attractor solutions imply that the coupled q-deformed dark energy model is consistent with the conventional dark energy models satisfying an acceleration phase of universe. At the end, we compare the cosmological parameters of deformed and standard dark energy models and interpret the implications.

  4. Deformed baryons: constituent quark model vs. bag model

    International Nuclear Information System (INIS)

    Iwamura, Y.; Nogami, Y.

    1985-01-01

    Recently Bhaduri et al. developed a nonrelativistic constituent quark model for deformed baryons. In that model the quarks move in a deformable mean field, and the deformation parameters are determined by minimizing the quark energy subject to the constraint of volume conservation. This constraint is an ad hoc assumption. It is shown that, starting with a bag model, a model similar to that of Bhaduri et al. can be constructed. The deformation parameters are determined by the pressure balance on the bag surface. There is, however, a distinct difference between the two models with respect to the state dependence of the ''volume''. Implications of this difference are discussed

  5. Order and chaos in nuclear and metal cluster deformation

    International Nuclear Information System (INIS)

    Radu, S.

    1995-08-01

    The vast amount of nuclear and metal cluster data indicates that shell structure and deformation are two simultaneous properties. A conflicting situation is therefore encountered as the shell structure, a firm expression of order, is apparently not compatible with the non-integrable nature of the models incorporating deformation. The main issue covered in this thesis is the intricate connection between deformation and chaotic behaviour in deformation models pertinent to nuclear structure and metal cluster physics. It is shown that, at least in some cases, it is possible to reconcile the occurrence of shell structure with non-integrability. The coupling of an axially deformed harmonic oscillator to an axially symmetric octupole term renders the problem non-integrable. The chaotic character of the motion is strongly dependent on the type of deformation, in that a prolate shape shows virtually no chaos, while in an oblate case the motion exhibits fully developed chaos when the octupole term is switched on. Whereas the problem is non-integrable, the quantum mechanical spectrum nevertheless shows some shell structure in the prolate case for particular, yet fairly large octupole strengths; for spherical or oblate deformation the shell structure disappears. This result is explained in terms of classical periodic orbits which are found by employing the 'removal of resonances method'. Particular emphasis is put on the effect of the hexadecapole deformation which is important in fission processes. The combined effect of octupole and hexadecapole deformation leads to important conclusions for the experimental work as a high degree of ambiguity is signaled for the interpretation of data. The ambiguity results from the discovery of a mutual cancellation of the octupole and hexadecapole deformation in prolate superdeformed systems. The phenomenological Nilsson model is treated in a similar way. It is argued that while in nuclei it produces good results for the low-lying levels

  6. About deformation and rigidity in relativity

    International Nuclear Information System (INIS)

    Coll, Bartolome

    2007-01-01

    The notion of deformation involves that of rigidity. In relativity, starting from Born's early definition of rigidity, some other ones have been proposed, offering more or less interesting aspects but also accompanied of undesired or even pathological properties. In order to clarify the origin of these difficulties presented by the notion of rigidity in relativity, we analyze with some detail significant aspects of the unambiguous classical, Newtonian, notion. In particular, the relative character of its kinetic definition is pointed out, allowing to predict and to understand the limitations imposed by Herglotz-Noether theorem. Also, its equivalent dynamic definition is obtained and, in contrast, its absolute character is shown. But in spite of this absolute character, the dynamic definition is shown to be not extensible to relativity. The metric deformation of Minkowski space by the presence of a gravitational field is interpreted as a universal deformation, and it is shown that, under natural conditions, only a simple deformation law is possible, relating locally, but in an one-to-one way, gravitational fields and gauge classes of two-forms. We argue that fields of unit vectors associated to the internal gauge class of two-forms of every space-time (and, in particular, of Minkowski space-time) are the relativistic analogues of the classical accelerated observers, i.e. of the classical rigid motions. Some other consequences of the universal law of gravitational deformation are commented

  7. Tres modelos de adaptación del flamenco a las músicas populares urbanas en Andalucía

    Directory of Open Access Journals (Sweden)

    Fernando Barrera Ramírez

    2015-01-01

    Full Text Available Este artículo pretende estudiar y valorar las hibridaciones musicales entre géneros populares vividas en Andalucía durante los últimos años a través de tres casos concretos: las canciones de Los Planetas, Pony Bravo, Sr. Chinarro en sus particulares acercamientos al flamenco; estudio del origen y evolución de los parámetros formales, estéticos, sociales y comerciales de estas producciones.

  8. Deformed supersymmetric mechanics

    International Nuclear Information System (INIS)

    Ivanov, E.; Sidorov, S.

    2013-01-01

    Motivated by a recent interest in curved rigid supersymmetries, we construct a new type of N = 4, d = 1 supersymmetric systems by employing superfields defined on the cosets of the supergroup SU(2|1). The relevant worldline supersymmetry is a deformation of the standard N = 4, d = 1 supersymmetry by a mass parameter m. As instructive examples we consider at the classical and quantum levels the models associated with the supermultiplets (1,4,3) and (2,4,2) and find out interesting interrelations with some previous works on nonstandard d = 1 supersymmetry. In particular, the d = 1 systems with 'weak supersymmetry' are naturally reproduced within our SU(2|1) superfield approach as a subclass of the (1,4,3) models. A generalization to the N = 8, d = 1 case implies the supergroup SU(2|2) as a candidate deformed worldline supersymmetry

  9. Complex structure-induced deformations of σ-models

    Energy Technology Data Exchange (ETDEWEB)

    Bykov, Dmitri [Max-Planck-Institut für Gravitationsphysik, Albert-Einstein-Institut,Am Mühlenberg 1, D-14476 Potsdam-Golm (Germany); Steklov Mathematical Institute of Russ. Acad. Sci.,Gubkina str. 8, 119991 Moscow (Russian Federation)

    2017-03-24

    We describe a deformation of the principal chiral model (with an even-dimensional target space G) by a B-field proportional to the Kähler form on the target space. The equations of motion of the deformed model admit a zero-curvature representation. As a simplest example, we consider the case of G=S{sup 1}×S{sup 3}. We also apply a variant of the construction to a deformation of the AdS{sub 3}×S{sup 3}×S{sup 1} (super-)σ-model.

  10. Scaling control in superficial installations at the Las Tres Virgenes, geothermal field, BCS; Control de incrustacion en instalaciones superficiales del campo geotermico de Las Tres Virgenes, BCS

    Energy Technology Data Exchange (ETDEWEB)

    Tapia Salazar, Ruth [Comision Federal de Electricidad (Mexico)]. E-mail: ruth.tapia@cfe.gob.mx

    2007-01-15

    Silica scaling is one of the most important problems in the Las Tres Virgenes geothermal field. It affects not only the superficial installations, like brine injection pipelines, but also the injection wells where it reduces injection capacity. Separated brine passes from production wells to injection wells by means of steel pipelines 10 and 14 inches in diameter. The pipelines are affected by silica scaling that occurs when the two-phase fluid is discharged at atmospheric pressure and the separated brine is cooled and concentrated and then over saturated with amorphous silica. Even when the pipelines were cleaned periodically, it was necessary to implement a technique for prevent scaling. Two methods considered appropriate to the specific field conditions were studied, and finally the technique of modifying the brine pH was adopted. After over a year of using this technique in the general injection system, no mechanical cleaning of the pipelines has been necessary-and once cleaning was needed at least every third day. This represents an important improvement in the steam supply system. [Spanish] Uno de los problemas mas importantes en el campo geotermico de Las Tres Virgenes es la incrustacion por silice, la cual afecta no solo a instalaciones superficiales como lineas de inyeccion de salmuera, sino tambien a los pozos inyectores al reducir su capacidad de aceptacion. El agua producida por los pozos productores se conduce hasta los pozos inyectores por medio de tuberias de acero al carbon de 10 y 14 pulgadas de diametro, que se ven afectadas por la incrustacion de silice. La incrustacion ocurre debido a que cuando el fluido en dos fases es descargado a presion atmosferica, la salmuera separada, enfriada y concentrada, esta usualmente sobresaturada con respecto a la solubilidad de la silice amorfa. Aunque las tuberias se limpiaban mecanicamente, fue necesario seleccionar una tecnica para prevenir la incrustacion, para lo cual se estudiaron dos de los metodos que

  11. Sugawara construction and the q-deformation of Virasoro (super)algebra

    Energy Technology Data Exchange (ETDEWEB)

    Chaichian, M. (Theory Div., CERN, Geneva (Switzerland)); Presnajder, P. (Dept. of Theoretical Physics, Comenius Univ., Bratislava (Czechoslovakia))

    1992-02-27

    The q-deformed Virasoro algebra is obtained using the bosonic annihilation and creation operators of the q-deformed infinite Heisenberg algebra H({infinity}){sub q}, which has the Hopf structure. The generators of the q-deformed Virasoro algebra are expressed as a Sugawara construction in terms of normal ordered binomials in these annihilation and creation operators and become double indexed as the reminiscence of a degeneracy removal. The obtained q-deformed Virasoro algebra with central extension reduces to the standard one in the non-deformed limit and in special representations (but not in general) possesses a simple (cocommutative) Hopf structure (not related to the one in H({infinity}){sub q}). The fermionic annihilation and creation operators corresponding to the q-deformed infinite Heisenberg superalgebra s-H({infinity}){sub q} necessary for a similar construction of the q-deformed Virasoro superalgebra are presented. (orig.).

  12. High spin exotic states and new method for pairing energy; Etats exotiques a hauts spins et nouvelle methode pour l`energie d`appariement nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Molique, H.

    1996-01-19

    We present a new method called `PSY-MB`, initially developed in the framework of abstract group theory for the solution of the problem of strongly interacting multi-fermionic systems with particular to systems in an external rotating field. The validity of the new method (PSY-MB) is tested on model Hamiltonians. A detailed comparison between the obtained solutions and the exact ones is performed. The new method is used in the study of realistic nuclear Hamiltonians based on the Woods-Saxon potential within the cranking approximation to study the influence of residual monopole pairing interactions in the rare-earth mass region. In parallel with this new technique we present original results obtained with the Woods-Saxon mean-field and the self-consistent Hartree-Fock approximation in order to investigate such exotic effects as octupole deformations and hexadecapole C{sub 4}-polarizing deformations in the framework of high-spin physics. By developing these three approaches in one single work we prepare the ground for the nuclear structure calculations of the new generation - where the residual two-body interactions are taken into account also in the weak pairing limit. (author). 2370refs.

  13. Effective interactions from q-deformed quark fields

    International Nuclear Information System (INIS)

    Timoteo, V. S.; Lima, C. L.

    2007-01-01

    From the mass term for q-deformed quark fields, we obtain effective contact interactions of the NJL type. The parameters of the model that maps a system of non-interacting deformed fields into quarks interacting via NJL contact terms is discussed

  14. Structural refinement and coarsening in deformed metals

    DEFF Research Database (Denmark)

    Hansen, N.; Huang, X.; Xing, Q.

    2005-01-01

    The microstructural refinement by plastic deformation is analysed in terms of key parameters, the spacing between and the misorientation angle across the boundaries subdividing the structure. Coarsening of such structures by annealing is also characterised. For both deformed and annealed structur...

  15. A General Polygon-based Deformable Model for Object Recognition

    DEFF Research Database (Denmark)

    Jensen, Rune Fisker; Carstensen, Jens Michael

    1999-01-01

    We propose a general scheme for object localization and recognition based on a deformable model. The model combines shape and image properties by warping a arbitrary prototype intensity template according to the deformation in shape. The shape deformations are constrained by a probabilistic distr...

  16. Pattern of seismic deformation in the Western Mediterranean

    Directory of Open Access Journals (Sweden)

    S. Pondrelli

    1999-06-01

    Full Text Available The seismic deformation of the Western Mediterranean was studied with the aim of defining the strain pattern that characterizes the Africa-Eurasia plate boundary in this area. Within different sections along the boundary the cumulative moment tensor was computed over 90 years of seismological data. The results were compared with NUVELlA plate motion model and geodetic data. A stable agreement was found along Northern Africa to Sicily, where only Africa and Eurasia plates are involved. In this zone it is evident that changes in the strike of the boundary correspond to variations in the prevailing geometry of deformation, tectonic features and in the percentage of seismic with respect to total expected deformation. The geometry of deformation of periadriatic sections (Central to Southern Apennines, Eastern Alps and the Eastern Adriatic area agrees well with VLBI measurements and with regional geological features. Seismicity seems to account for low rates, from 3% to 31%, of total expected deformation. Only in the Sicily Strait, characterized by extensional to strike slip deformation, does the ratio reach a higher value (79%. If the amount of deformation deduced from seismicity seems low, because 90 years are probably not representative of the recurrence seismic cycle of the Western Mediterranean, the strain pattern we obtain from cumulative moment tensors is more representative of the kinematics of this area than global plate motion models and better identifies lower scale geodynamic features.

  17. Deformation effects during hydride transformations in the Ta-H system

    International Nuclear Information System (INIS)

    Spivak, L.V.; Kats, M.Ya.

    1991-01-01

    A behavior of alloys with hydrogen constant content under thermocycling in stress fields and deformation effects in thermodynamically closed system of Ta-H are considered. Effect of hydrogenized tantalum heating and cooling on differential electroresistance, shear modulus and internal friction have been investigated. Spontaneuous deformation (twist effect) has been established under heating of hydrogenized and homogenized tantalum after prethermocycling of unloaded samples at hydroidation transition temperature. Cooling from homogeneous area under a load less than yield-point is accompanied by significant deformation at the temperature of hydridation.Investigated results enable one to conclude that observed deformation comprises a transition plasticity effect. Sample heating under no-load conditions leads to recovery of deformation accumulated during cooling. Besides it has been revealed that deformation of oriented transformation (DOT) exibits in Ta-H system. By this means the shape memory effect obtained as well as DOT demonstrated experimentally for the first time. Observed deformation effects are considered as a result of oriented growth or disapear of hydride crystals according to the deformation sheme

  18. Large scale deformation of the oceanic lithosphere: insights from numerical modeling of the Indo-Australian intraplate deformation

    Science.gov (United States)

    Royer, J.; Brandon, V.

    2011-12-01

    The large-scale deformation observed in the Indo-Australian plate seems to challenge tenets of plate tectonics: plate rigidity and narrow oceanic plate boundaries. Its distribution along with kinematic data inversions however suggest that the Indo-Australian plate can be viewed as a composite plate made of three rigid component plates - India, Capricorn, Australia - separated by wide and diffuse boundaries either extensional or compressional. We tested this model using the SHELLS numerical code (Kong & Bird, 1995) where the Indo-Australian plate was meshed into 5281 spherical triangular finite elements. Model boundary conditions are defined only by the plate velocities of the rigid parts of the Indo-Australian plate relative to their neighboring plates. Different plate velocity models were tested. From these boundary conditions, and taking into account the age of the lithosphere, seafloor topography, and assumptions on the rheology of the oceanic lithosphere, SHELLS predicts strain rates within the plate. We also tested the role of fossil fracture zones as potential lithospheric weaknesses. In a first step, we considered different component plate pairs (India/Capricorn, Capricorn/Australia, India/Australia). Since the limits of their respective diffuse boundary (i.e. the limits of the rigid component plates) are not known, we let the corresponding edge free. In a second step, we merged the previous meshes to consider the whole Indo-Australian plate. In this case, the velocities on the model boundaries are all fully defined and were set relative to the Capricorn plate. Our models predict deformation patterns very consistent with that observed. Pre-existing structures of the lithosphere play an important role in the intraplate deformation and its distribution. The Chagos Bank focuses the extensional deformation between the Indian and Capricorn plates. Reactivation of fossil fracture zones may accommodate large part of the deformation both in extensional areas, off

  19. Q-deformed systems and constrained dynamics

    International Nuclear Information System (INIS)

    Shabanov, S.V.

    1993-01-01

    It is shown that quantum theories of the q-deformed harmonic oscillator and one-dimensional free q-particle (a free particle on the 'quantum' line) can be obtained by the canonical quantization of classical Hamiltonian systems with commutative phase-space variables and a non-trivial symplectic structure. In the framework of this approach, classical dynamics of a particle on the q-line coincides with the one of a free particle with friction. It is argued that q-deformed systems can be treated as ordinary mechanical systems with the second-class constraints. In particular, second-class constrained systems corresponding to the q-oscillator and q-particle are given. A possibility of formulating q-deformed systems via gauge theories (first-class constrained systems) is briefly discussed. (orig.)

  20. Ultimate deformation capacity of reinforced concrete slabs underblast load

    NARCIS (Netherlands)

    Doormaal, J.C.A.M. van; Weerheijm, J.

    1996-01-01

    In this paper a test method to determine the deformation capacity and the resistance-deformation curve of blast-loaded slabs is described. This method was developed at TNO-PML. The method has been used to determine the ultimate deformation capacity of some simply supported reinforced concrete slabs

  1. Discrete integrable systems and deformations of associative algebras

    International Nuclear Information System (INIS)

    Konopelchenko, B G

    2009-01-01

    Interrelations between discrete deformations of the structure constants for associative algebras and discrete integrable systems are reviewed. Theory of deformations for associative algebras is presented. Closed left ideal generated by the elements representing the multiplication table plays a central role in this theory. Deformations of the structure constants are generated by the deformation driving algebra and governed by the central system of equations. It is demonstrated that many discrete equations such as discrete Boussinesq equation, discrete WDVV equation, discrete Schwarzian KP and BKP equations, discrete Hirota-Miwa equations for KP and BKP hierarchies are particular realizations of the central system. An interaction between the theories of discrete integrable systems and discrete deformations of associative algebras is reciprocal and fruitful. An interpretation of the Menelaus relation (discrete Schwarzian KP equation), discrete Hirota-Miwa equation for KP hierarchy, consistency around the cube as the associativity conditions and the concept of gauge equivalence, for instance, between the Menelaus and KP configurations are particular examples.

  2. Collisions of deformed nuclei and superheavy-element production

    International Nuclear Information System (INIS)

    Iwamoto, Akira; Moeller, P.; Univ. of Aizu, Fukushima; P. Moller Scientific Computing and Graphics, Inc., Los Alamos, NM; Los Alamos National Lab., NM; Nix, J.R.; Sagawa, Hiroyuki, Sagawa

    1995-01-01

    A detailed understanding of complete fusion cross sections in heavy-ion collisions requires a consideration of the effects of the deformation of the projectile and target. The aim here is to show that deformation and orientation of the colliding nuclei have a very significant effect on the fusion-barrier height and on the compactness of the touching configuration. To facilitate discussions of fusion configurations of deformed nuclei, the authors develop a classification scheme and introduce a notation convention for these configurations. They discuss particular deformations and orientations that lead to compact touching configurations and to fusion-barrier heights that correspond to fairly low excitation energies of the compound systems. Such configurations should be the most favorable for producing superheavy elements. They analyze a few projectile-target combinations whose deformations allow favorable entrance-channel configurations and whose proton and neutron numbers lead to compound systems in a part of the superheavy region where a half-lives are calculated to be observable, that is, longer than 1 micros

  3. Breakdowns in the deformation monitoring and their control

    Directory of Open Access Journals (Sweden)

    Gabriel Weiss

    2007-04-01

    Full Text Available The deformation analysis from the point of view of its subject and methodology is an extensive part of geodetic and other methods for watching objects´ stabilities and for the determination of their changes using suitable quantities from deformation measurements performed in more epochs. In the monitoring of the object deformations, their characteristic points – object points (OB are measured and their stabilities or movements are registered relating to a convenient number of robust reference points (RB in the surroundings. It often happens in the monitoring that some RBs are lost (damage, destruction, etc., resulting in datum changes of the deformation net and making a reliable stability evaluation of the OBs impossible.In this contribution to the problems of right datum determination for the whole net, three methods are introduced to reduce various datums to one of them for the whole deformation net, when the original (1st datum can not be used in all epochs.

  4. Deformation processes within wheel-rail adhesion in contact area

    Science.gov (United States)

    Albagachiev, A. Yu; Keropyan, A. M.

    2018-03-01

    The study of working surface deformation during interaction of open-pit locomotive tires allowed defining outstanding features of phenomena occurring in the contact area of interacting surfaces. It was found that processes typical for plastic saturated contact occur in the area of wheel-rail interaction of industrial railway transport. In case of plastic deformation exposed to heavy loads typical for open-pit locomotives, upon all rough surfaces of the contour contact area being fully deformed, the frame on which they are found is exposed to plastic deformation. Plastic deformation of roughness within the contact area of interacting surfaces leads to the increase in the actual area of their contact and, therefore, increases the towing capacity of mining machines. Finally, the available data on deformation characteristics with regard to processes occurring in the contact area of wheel-rail interaction will allow making theoretical forecasts on the expected design value of friction coefficient and, therefore, the towing capacity of open-pit locomotives.

  5. Massless quark wavefunction in the deformed bag

    International Nuclear Information System (INIS)

    Min, D.P.; Park, B.Y.; Koh, Y.S.

    1984-01-01

    The quark wavefunctions inside the deformed bag are obtained using a modified linear boundary condition stemming from the MIT bag Lagrangian with an additional term. We propose an exact method to obtain the quark wavefunction even for a spheroidally deformed bag. (Author)

  6. Work-hardening stages and deformation mechanism maps during tensile deformation of commercially pure titanium

    DEFF Research Database (Denmark)

    Becker, Hanka; Pantleon, Wolfgang

    2013-01-01

    Commercially pure titanium was tensile tested at different strain rates between 2.2×10−4s−1 and 6.7×10−1s−1 to characterize the strain rate dependence of plastic deformation and the dominating deformation mechanisms. From true stress-true plastic strain curves, three distinct work-hardening stages...... are identified. The work-hardening rate decreases linearly with increasing flow stress for all three stages and the work-hardening rate is the controlling factor for the transition between the different stages and mechanisms. During the initial stage (at lowest stresses) plastic deformation is carried mainly...... by dislocation slip, in the following stage (for moderate stresses), an abundance of 64.6∘〈1¯010〉 twin boundaries form indicating the dominance of {112¯2}〈1¯1¯23〉 compression twinning. During the last stage before the onset of necking, additional 84.8∘〈112¯0〉 twin boundaries are detected caused by {101...

  7. Numerical modeling of the Indo-Australian intraplate deformation

    Science.gov (United States)

    Brandon, Vincent; Royer, Jean-Yves

    2014-05-01

    The Indo-Australian plate is perhaps the best example of wide intraplate deformation within an oceanic plate. The deformation is expressed by an unusual level of intraplate seismicity, including magnitude Mw > 8 events, large-scale folding and deep faulting of the oceanic lithosphere and reactivation of extinct fracture zones. The deformation pattern and kinematic data inversions suggest that the Indo-Australian plate can be viewed as a composite plate made of three rigid component plates - India, Capricorn, Australia - separated by wide and diffuse boundaries undergoing either extensional or compressional deformation. We tested this model using the SHELLS numerical code (Kong & Bird, 1995). The Indo-Australian plate is modeled by a mesh of 5281 spherical triangular finite elements. Mesh edges parallel the major extinct fracture zones so that they can be reactivated by reducing their friction rates. Strength of the plate is defined by the age of the lithosphere and seafloor topography. Model boundary conditions are only defined by the plate velocities predicted by the rotation vectors between rigid components of the Indo-Australian plate and their neighboring plates. Since the mesh limits all belong to rigid plates with fully defined Euler vectors, no conditions are imposed on the location, extent and limits of the diffuse and deforming zones. Using MORVEL plate velocities (DeMets et al., 2010), predicted deformation patterns are very consistent with that observed. Pre-existing structures of the lithosphere play an important role in the intraplate deformation and its distribution. The Chagos Bank focuses most of the extensional deformation between the Indian and Capricorn plates. Agreement between models and observation improves by weakening fossil fracture zones relative to the surrounding crust; however only limited sections of FZ's accommodate deformation. The reactivation of the Eocene FZ's in the Central Indian Basin (CIB) and Wharton Basin (WB) explains the

  8. Deformation induced martensitic transformation in stainless steels

    International Nuclear Information System (INIS)

    Nagy, E.; Mertinger, V.; Tranta, F.; Solyom, J.

    2003-01-01

    Deformation induced martensitic transformation was investigated in metastable austenitic stainless steel. This steel can present a microstructure of austenite (γ), α' martensite and non magnetic ε martensite. Uni-axial tensile test was used for loading at different temperatures below room temperature (from -120 to 20 deg. C). During the deformation the transformation takes place at certain places in an anisotropic way and texture also develops. Quantitative phase analysis was done by X-ray diffraction (XRD) and magnetic methods while the texture was described by X-ray diffraction using a special inverse pole figure. The quantitative phase analysis has shown that the formation of α' and ε martensite from austenite is the function of deformation rate, and deformation temperature. The transformation of the textured austenite takes place in an anisotropic way and a well defined crystallographic relationship between the parent and α' martensite phase has been measured

  9. Mechanisms of deformation and of recrystallization of imperfect uranium monocrystals

    International Nuclear Information System (INIS)

    Calais, D.

    1960-04-01

    The various means by which plastic deformations by slip, twinning or kinking are produced by tension of imperfect α uranium single crystals prepared by a β → α phase change, have been studied by X-rays and micrographic examination. Depending on the crystallographic orientation with respect to the direction of the applied tension, and depending on the magnitude of the change in length, the crystals are deformed either preferentially according to a single mechanism, for example twinning, or simultaneously according to two or three mechanisms. The results of a subsequent annealing of the deformed single in the α phase are studied with respect to the deformation mechanisms. In the case of a deformation due primarily to (010) [100], (011) [100] or (110) [001] sliding, there occurs recrystallization by crystal growth selectivity. If the deformation occurs via deformation bands, there is recrystallization by 'oriented nucleation'. The crystals deformed preponderantly by twinning give on recrystallization perfect crystals having optimum dimensions and having orientational characteristics closely related to those of the original crystal. Finally are discussed some criteria relating to the geometry and the dynamics with a view to explaining the occurrence of such and such a deformation mechanism of a single crystal with a given orientation. This study, in conclusion, must help to define the best conditions (crystalline orientation and process of deformation) which will promote the growth of large, perfect, single crystals. (author) [fr

  10. Tejiendo vínculos: tres mecanismos socioadaptativos desplegados por el movimiento Sai Baba en Argentina

    Directory of Open Access Journals (Sweden)

    Rodolfo Puglisi

    2012-01-01

    Full Text Available Luego de presentar los caracteres fundamentales del armazón institucional de la Or - ganización Sri Sathya Sai Baba ( osss B , surgida en la India, y de bosquejar la historia del movimiento Sai Baba en Argentina, en este artículo presento las que denomino tres estrategias socioadaptativas puestas en juego por el movimiento para favorecer la acomodación de sus creencias al campo sociorreligioso argentino, es decir, examino cómo se tejen puentes simbólicos con el trasfondo cultural local a fin de lograr una identificación con los valores de la sociedad receptora.

  11. Crecimiento y estado nutricional de escolares de tres comunidades de Yucatán, México

    OpenAIRE

    Azcorra, Hugo; Vázquez-Vázquez, Adriana; Baqueiro Cárdenas, José Enrique; Salazar-Rendón, Juan Carlos

    2016-01-01

    En México, el estado nutricional de niños en edad escolar aun es un problema de salud pública, particularmente en el sureste del país en donde las cifras de mala nutrición son alarmantes. El estado de Yucatán, México, presenta una de las prevalencias más altas de desnutrición crónica (talla baja) y sobrepeso/obesidad en la región. El objetivo de este estudio es describir el estado nutricional y de crecimiento de una muestra de niños y niñas escolares (6 a 12 años de edad) en tres comunidades ...

  12. Shear zone nucleation and deformation transient: effect of heterogeneities and loading conditions in experimentally deformed calcite

    Science.gov (United States)

    Morales, L. F. G.; Rybacki, E.; Dresen, G. H.; Kilian, R.

    2015-12-01

    In the Earth's middle to lower crust, strain is frequently localized along ductile shear zones, which commonly nucleate at structural and material heterogeneities. To investigate shear zone nucleation and development due to heterogeneities, we performed constant strain-rate (CSR) and constant stress (CS) simple shear (torsion) deformation experiments on Carrara marble samples containing weak (limestone) inclusions. The experiments were conducted in a Paterson-type gas deformation apparatus at 900 °C temperature and 400 MPa confining pressure and maximum bulk shear strains of 3. Peak shear stress was about 20 MPa for all the samples, followed by smooth weakening and steady state behavior. The strain is predominantly localized in the host marble within the process zone in front of the inclusion, defined by a zone of intense grain size reduction due to dynamic recrystallization. In CS tests a narrow shear zone developed in front of the inclusion, whereas in CSR experiments the deformation is more heterogeneously distributed, up to g=3.. In the later, secondary foliations oblique to the process zone and alternating thin, high-strain layers are common. In samples deformed at the same shear strain (g=1), the average recrystallized grain size in the process zone is similar for CS and CSR conditions. Crystallographic preferred orientation (CPO) measurements shows that different grain sizes have slightly different CPO patterns. CPO strength varies for different grain sizes, with a CPO strength peak between 40-50 μm, decreasing progressively within smaller grain size, but with secondary peaks for different coarse-grained sizes. Our observations suggest that the initial formation and transient deformation of shear zones is strongly affected by loading conditions.

  13. Pneumatic tyres interacting with deformable terrains

    Science.gov (United States)

    Bekakos, C. A.; Papazafeiropoulos, G.; O'Boy, D. J.; Prins, J.

    2016-09-01

    In this study, a numerical model of a deformable tyre interacting with a deformable road has been developed with the use of the finite element code ABAQUS (v. 6.13). Two tyre models with different widths, not necessarily identical to any real industry tyres, have been created purely for research use. The behaviour of these tyres under various vertical loads and different inflation pressures is studied, initially in contact with a rigid surface and then with a deformable terrain. After ensuring that the tyre model gives realistic results in terms of the interaction with a rigid surface, the rolling process of the tyre on a deformable road was studied. The effects of friction coefficient, inflation pressure, rebar orientation and vertical load on the overall performance are reported. Regarding the modelling procedure, a sequence of models were analysed, using the coupling implicit - explicit method. The numerical results reveal that not only there is significant dependence of the final tyre response on the various initial driving parameters, but also special conditions emerge, where the desired response of the tyre results from specific optimum combination of these parameters.

  14. All Madelung deformities are not endocrine.

    Science.gov (United States)

    Kumar, Ajay; Rai, Gopal K; Akhtar, Javed; Phillip, Rajeev; Gutch, Manish; Arya, T V S

    2013-10-01

    Madelung deformity is a rare inherited disorder associated with endocrine disorders like Turner's syndrome, pseudohypoparathyroidism, but can be seen with short stature homeobox deficiency conditions such as Leri-Weill dyschondrosteosis (LWD) and Langers mesomelic dysplasia. It has also been reported following trauma to the distal radius epiphysis neoplasia mucopolysaccharidosis (MPS) and achondroplasia. Madelung deformity is an abnormality of distal radial epiphysis where in progressive ulnar and volar tilt of the articular surface occurring in association with distal subluxation of ulna. A 13-year-old girl was referred to us for evaluation of bilateral deformity of wrist and short stature. There was ulnar deviation and dorsal tilt of bilateral hands without history of pain to the joint trauma and family history of similar illness. On X-ray, wrist showed malformed distal radial epiphysis with dorsal and ulnar shift and with increased length of phalanges suggestive of Madelung deformity. X-ray spine was normal. Ultrasound abdomen showed normal uterus and ovary and her follicle stimulating hormone. Luteinizing hormone was normal and so was urine MPS screening. Based on the above points the diagnosis of LWD was made.

  15. Viscoelastic deformation of lipid bilayer vesicles.

    Science.gov (United States)

    Wu, Shao-Hua; Sankhagowit, Shalene; Biswas, Roshni; Wu, Shuyang; Povinelli, Michelle L; Malmstadt, Noah

    2015-10-07

    Lipid bilayers form the boundaries of the cell and its organelles. Many physiological processes, such as cell movement and division, involve bending and folding of the bilayer at high curvatures. Currently, bending of the bilayer is treated as an elastic deformation, such that its stress-strain response is independent of the rate at which bending strain is applied. We present here the first direct measurement of viscoelastic response in a lipid bilayer vesicle. We used a dual-beam optical trap (DBOT) to stretch 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) giant unilamellar vesicles (GUVs). Upon application of a step optical force, the vesicle membrane deforms in two regimes: a fast, instantaneous area increase, followed by a much slower stretching to an eventual plateau deformation. From measurements of dozens of GUVs, the average time constant of the slower stretching response was 0.225 ± 0.033 s (standard deviation, SD). Increasing the fluid viscosity did not affect the observed time constant. We performed a set of experiments to rule out heating by laser absorption as a cause of the transient behavior. Thus, we demonstrate here that the bending deformation of lipid bilayer membranes should be treated as viscoelastic.

  16. All Madelung deformities are not endocrine

    Directory of Open Access Journals (Sweden)

    Ajay Kumar

    2013-01-01

    Full Text Available Madelung deformity is a rare inherited disorder associated with endocrine disorders like Turner′s syndrome, pseudohypoparathyroidism, but can be seen with short stature homeobox deficiency conditions such as Leri-Weill dyschondrosteosis (LWD and Langers mesomelic dysplasia. It has also been reported following trauma to the distal radius epiphysis neoplasia mucopolysaccharidosis (MPS and achondroplasia. Madelung deformity is an abnormality of distal radial epiphysis where in progressive ulnar and volar tilt of the articular surface occurring in association with distal subluxation of ulna. A 13-year-old girl was referred to us for evaluation of bilateral deformity of wrist and short stature. There was ulnar deviation and dorsal tilt of bilateral hands without history of pain to the joint trauma and family history of similar illness. On X-ray, wrist showed malformed distal radial epiphysis with dorsal and ulnar shift and with increased length of phalanges suggestive of Madelung deformity. X-ray spine was normal. Ultrasound abdomen showed normal uterus and ovary and her follicle stimulating hormone. Luteinizing hormone was normal and so was urine MPS screening. Based on the above points the diagnosis of LWD was made.

  17. Geological ductile deformation mapping at the Olkiluoto site, Eurajoki, Finland

    Energy Technology Data Exchange (ETDEWEB)

    Engstroem, J. [Geological Survey of Finland, Espoo (Finland)

    2013-12-15

    During 2010-2012 eight larger excavated and cleaned outcrops were investigated to study the polyphase nature of the ductile deformation within the Olkiluoto Island. A detailed structural geological mapping together with a thin section study was performed to get a broader and better understanding of the nature and occurrence of these different ductile deformation phases. These outcrops were selected to represent all different ductile deformation phases recognized earlier during the site investigations. The relicts of primary sedimentary structures and products of the earliest deformations (D{sub 0}-D{sub 1}) are mostly obscured by later deformation events. The D{sub 2}-D{sub 4} is the most significant ductile deformation phases occurring on the Olkiluoto Island and almost all structural features can be labeled within these three phases. The outcrops for this investigation were selected mostly from the eastern part of the Olkiluoto Island because that part of the Island has been less investigated previously. As a reference, one outcrop was selected in the western part of the Island where it was previously known that this location had especially well preserved structures of the second deformation phase (D{sub 2}). The S{sub 2} foliation is E-W orientated with moderate dip towards south. A few folds can be associated with this deformational event, mostly having a tight to isoclinal character. During D{sub 3} the migmatites were re-deformed and migrated leucosomes, were intruded mainly parallel to S{sub 3} axial surfaces having a NE-SW orientation. Generally the dip of the S{sub 3} axial surfaces is slightly more steeper (55- 65 deg C) than that of the S{sub 2} axial surfaces, which shows a more moderate dip (40-65 deg C). F{sub 3} fold structures are quite common in the eastern part of Island showing asymmetrical, overturned, shear folds usually with a dextral sense of shear. Large scale D{sub 3} shear structures contain blastomylonites as characteristic fault rocks

  18. Variación temporal y espacial de aves playeras en la laguna Barra de Navidad, Jalisco, en tres temporadas no reproductivas

    Directory of Open Access Journals (Sweden)

    Salvador Hernández

    2012-09-01

    Full Text Available Hay un escaso conocimiento de las aves playeras en los humedales costeros de Jalisco, y en particular en la laguna Barra de Navidad. El presente trabajo contribuye al conocimiento de este grupo de aves y describe su distribución temporal y espacial en la laguna Barra de Navidad durante tres temporadas no reproductivas (1999-2000, 2006-2007 y 2008-2009. Se realizaron censos mensuales de noviembre-abril en las tres temporadas con el fin de registrar todas las especies de aves playeras. Se identificaron 19 especies (tres residentes y 16 visitantes de invierno, de las cuales Charadrius wilsonia, Limosa fedoa y Tringa semipalmata presentaron la mayor abundancia. Doce especies son consideradas como prioritarias en la “Estrategia para la Conservación y Manejo de las Aves Playeras y su Hábitat en México”. El mayor número de especies fue registrado en noviembre, diciembre y marzo en la primera y tercera temporada. El mayor número de individuos fue registrado alimentándose en marea baja, principalmente en diciembre, enero y febrero de la primera y tercera temporada. En marea baja hubo un mayor número de especies e individuos alimentándose en la zona C. Esta zona se caracterizó por tener sustratos lodosos expuestos durante marea baja y que fueron aprovechados por las aves para alimentarse. La laguna Barra de Navidad proporcionó hábitats de alimentación y descanso para las aves residentes y migratorias. Sin embargo, estos hábitats se ven amenazados por las actividades humanas realizadas dentro de la laguna, que sin duda tendrán consecuencias negativas para la distribución y abundancia de las aves playeras.

  19. Vegetación halófila de tres localidades andinas en la vertiente pácifica del sur de perú

    NARCIS (Netherlands)

    Montesinos, D.B.

    2012-01-01

    Se describen las comunidades vegetales halófilas halladas en tres ecosistemas andinos en los departamentos de Arequipa y Moquegua (sur de Perú) en campos con influencia de pastoreo, fuego, abandono de agricultura o ocupando suelos inundados en las márgenes de los ríos. Se aplicó la metodología

  20. Rebound Deformity After Growth Modulation in Patients With Coronal Plane Angular Deformities About the Knee: Who Gets It and How Much?

    Science.gov (United States)

    Leveille, Lise A; Razi, Ozan; Johnston, Charles E

    2017-05-18

    With observed success and increased popularity of growth modulation techniques, there has been a trend toward use in progressively younger patients. Younger age at growth modulation increases the likelihood of complete deformity correction and need for implant removal before skeletal maturity introducing the risk of rebound deformity. The purpose of this study was to quantify magnitude and identify risk factors for rebound deformity after growth modulation. We performed a retrospective review of all patients undergoing growth modulation with a tension band plate for coronal plane deformity about the knee with subsequent implant removal. Exclusion criteria included completion epiphysiodesis or osteotomy at implant removal, ongoing growth modulation, and modulation, before implant removal, and at final follow-up. In total, 67 limbs in 45 patients met the inclusion criteria. Mean age at growth modulation was 9.8 years (range, 3.4 to 15.4 y) and mean age at implant removal was 11.4 years (range, 5.3 to 16.4 y). Mean change in HKA after implant removal was 6.9 degrees (range, 0 to 23 degrees). In total, 52% of patients had >5 degrees rebound and 30% had >10 degrees rebound in HKA after implant removal. Females below 10 years and males below 12 years at time of growth modulation had greater mean change in HKA after implant removal compared with older patients (8.4 vs. 4.7 degrees, P=0.012). Patients with initial deformity >20 degrees had an increased frequency of rebound >10 degrees compared with patients with less severe initial deformity (78% vs. 22%, P=0.002). Rebound deformity after growth modulation is common. Growth modulation at a young age and large initial deformity increases risk of rebound. However, rebound does not occur in all at risk patients, therefore, we recommend against routine overcorrection. Level IV-retrospective study.

  1. Preliminary deformation model for National Seismic Hazard map of Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Meilano, Irwan; Gunawan, Endra; Sarsito, Dina; Prijatna, Kosasih; Abidin, Hasanuddin Z. [Geodesy Research Division, Faculty of Earth Science and Technology, Institute of Technology Bandung (Indonesia); Susilo,; Efendi, Joni [Agency for Geospatial Information (BIG) (Indonesia)

    2015-04-24

    Preliminary deformation model for the Indonesia’s National Seismic Hazard (NSH) map is constructed as the block rotation and strain accumulation function at the elastic half-space. Deformation due to rigid body motion is estimated by rotating six tectonic blocks in Indonesia. The interseismic deformation due to subduction is estimated by assuming coupling on subduction interface while deformation at active fault is calculated by assuming each of the fault‘s segment slips beneath a locking depth or in combination with creeping in a shallower part. This research shows that rigid body motion dominates the deformation pattern with magnitude more than 15 mm/year, except in the narrow area near subduction zones and active faults where significant deformation reach to 25 mm/year.

  2. Red blood cell dynamics: from cell deformation to ATP release.

    Science.gov (United States)

    Wan, Jiandi; Forsyth, Alison M; Stone, Howard A

    2011-10-01

    The mechanisms of red blood cell (RBC) deformation under both static and dynamic, i.e., flow, conditions have been studied extensively since the mid 1960s. Deformation-induced biochemical reactions and possible signaling in RBCs, however, were proposed only fifteen years ago. Therefore, the fundamental relationship between RBC deformation and cellular signaling dynamics i.e., mechanotransduction, remains incompletely understood. Quantitative understanding of the mechanotransductive pathways in RBCs requires integrative studies of physical models of RBC deformation and cellular biochemical reactions. In this article we review the physical models of RBC deformation, spanning from continuum membrane mechanics to cellular skeleton dynamics under both static and flow conditions, and elaborate the mechanistic links involved in deformation-induced ATP release. This journal is © The Royal Society of Chemistry 2011

  3. Incidence of hallux valgus deformity among Iranian university students

    Directory of Open Access Journals (Sweden)

    Abbas Rahimi

    2012-07-01

    Full Text Available Background and Aim: The dramatically increased incidence of hallux valgus (HV deformity is more related to the cultural rather than genetic parameters. Due to the lack of reliable information about the rate of this disorder in Iraninan societies, the researchers of the current study aimed to find out the incidence of this disorder in Iranian university students as a sample of Iranian youngsters. Materials and Methods: This descriptive study was carried out using a self-constructed and the American Orthopaedic Foot and Ankle Society (AOFAS questionnaires among 290 university students with the mean age of 21±2 years old. The HV angles (HVA was described as normal for up to 20º, mild for angles between 21º and 25º, moderate for angles between 26º and 40º, and severe for angles higher than 40 º. Then, the HVA of the subjects of this study was compared with the data from other societies.Results: The results of this study showed a 34.1% involvement of the participants (30% females and 41% males. 58% of the subjects showed a bilateral hallux valgus involvement. No significant differences were found between the males and females in terms of the severity of the deformity and the right or left side involvement (P>0.05. 71% of the involved subjects showed a mild degree and 29% showed a moderate degree of deformity. No severe deformity (above 40º was found in this study. In terms of the associated deformities, in subjects with mild deformity, 25% showed flat foot and 69% showed bunion disorder; While these were 21% and 82% in subjects with moderate deformity, respectively. In terms of inheritance correlation, while this deformity was shown in only 7% of normal subjects’ first degree relatives (father, mother, brothers or sisters, it increased to 21.1% in mild degree and 46.4% in moderate degree groups. Conclusion: This study revealed a very high incidence of HV deformity in Iranian university students as a sample of Iranian youngsters, which is

  4. Induction of mouthpart deformities in chironomid larvae exposed to contaminated sediments

    Energy Technology Data Exchange (ETDEWEB)

    Di Veroli, Alessandra [Dipartimento di Biologia Cellulare e Ambientale, Universita degli Studi di Perugia, Via Elce Di Sotto, 06123 Perugia (Italy); Goretti, Enzo [Dipartimento di Biologia Cellulare e Ambientale, Universita degli Studi di Perugia, Via Elce Di Sotto, 06123 Perugia (Italy); Paumen, Miriam Leon; Kraak, Michiel H.S.; Admiraal, Wim [Department of Aquatic Ecology and Ecotoxicology, Institute for Biodiversity and Ecosystem Dynamics (IBED), University of Amsterdam, Sciencepark 904, 1098 XH Amsterdam (Netherlands)

    2012-07-15

    The aim of the present study was to improve the cause-effect relationship between toxicant exposure and chironomid mouthpart deformities, by linking induction of mouthpart deformities to contaminated field sediments, metal mixtures and a mutagenic polycyclic aromatic compound metabolite (acridone). Mouthpart deformities in Chironomus riparius larvae were induced by both the heavy metal mixture and by acridone. A clear correlation between metal concentrations in the sediment and deformities incidence was only observed when the contaminated field sediments were left out of the analysis, probably because these natural sediments contained other toxic compounds, which could be responsible for a higher incidence of deformities than predicted by the measured metal concentrations only. The present study clearly improved the cause-effect relationship between toxicant exposure and the induction of mouthpart deformities. It is concluded that the incidence of mouthpart deformities may better reflect the potential toxicity of contaminated sediments than chemical analysis. - Highlights: Black-Right-Pointing-Pointer We tested the induction of deformities in C. riparius in laboratory toxicity experiments. Black-Right-Pointing-Pointer We used field sediments and spiked sediments with heavy metals and mutagenic PAC. Black-Right-Pointing-Pointer Mouthpart deformities were induced both by heavy metal mixtures and by acridone. Black-Right-Pointing-Pointer A correlation between metal concentrations in the sediment and deformities was found. Black-Right-Pointing-Pointer Mouthpart deformities better reflect the toxicity of sediments than chemical analysis. - Mouthpart deformities of Chironomus riparius larvae better reflect the toxicity of sediments than chemical analysis.

  5. Comparación de tres metaheurísticas para la optimización de inventarios con estimación de demanda

    Directory of Open Access Journals (Sweden)

    Laura Margarita Guerrero Guerra

    2016-04-01

    Full Text Available Dentro de las técnicas de solución a problemas complejos de optimización están las heurísticas y las Metaheurísticas. Este trabajo presenta tres Metaheurísticas: Colonia de Hormigas, Algoritmo Genético, y Programación Evolutiva, cuyo objetivo es establecer una comparación de características, ventajas y desventajas para dichas Metaheurísticas. Se hace una revisión de la literatura, así como también se diseñan los tres algoritmos en el software R, y se aplican en una empresa de confecciones, evaluando el comportamiento de los parámetros, tiempo de cálculo y la calidad en las soluciones. Los resultados experimentales muestran que el Algoritmo Colonia de Hormigas obtiene adecuadas soluciones y tiene más rapidez computacional, al compararlo con los otros dos procedimientos diseñados en el software R. Además, con éste fue posible definir la mejor política de inventarios de la empresa objeto de estudio.

  6. Prediction of grain deformation in drawn copper wire

    OpenAIRE

    Chang Chao-Cheng; Wang Zi-Wei; Huang Chien-Kuo; Wu Hsu-Fu

    2015-01-01

    Most copper wire is produced using a drawing process. The crystallographic texture of copper wire, which is strongly associated with grain deformation, can have a profound effect on the formability and mechanical and electrical properties. Thus, the ability to predict grain deformation in drawn copper wire could help to elucidate the evolution of microstructure, which could be highly valuable in product design. This study developed a novel method for predicting grain deformation in drawn copp...

  7. Non-local deformation of a supersymmetric field theory

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Qin [National University of Singapore, Department of Physics, Singapore (Singapore); Faizal, Mir [University of Lethbridge, Department of Physics and Astronomy, Lethbridge (Canada); University of British Columbia - Okanagan, Irving K. Barber School of Arts and Sciences, Kelowna, BC (Canada); Shah, Mushtaq B.; Ganai, Prince A. [National Institute of Technology, Department of Physics, Srinagar, Kashmir (India); Bhat, Anha [National Institute of Technology, Department of Metallurgical and Materials Engineering, Srinagar (India); Zaz, Zaid [University of Kashmir, Department of Electronics and Communication Engineering, Srinagar, Kashmir (India); Masood, Syed; Raza, Jamil; Irfan, Raja Muhammad [International Islamic University, Department of Physics, Islamabad (Pakistan)

    2017-09-15

    In this paper, we will analyze a supersymmetric field theory deformed by generalized uncertainty principle and Lifshitz scaling. It will be observed that this deformed supersymmetric field theory contains non-local fractional derivative terms. In order to construct such a deformed N = 1 supersymmetric theory, a harmonic extension of functions will be used. However, the supersymmetry will only be preserved for a free theory and will be broken by the inclusion of interaction terms. (orig.)

  8. Deformation quantization of principal fibre bundles

    International Nuclear Information System (INIS)

    Weiss, S.

    2007-01-01

    Deformation quantization is an algebraic but still geometrical way to define noncommutative spacetimes. In order to investigate corresponding gauge theories on such spaces, the geometrical formulation in terms of principal fibre bundles yields the appropriate framework. In this talk I will explain what should be understood by a deformation quantization of principal fibre bundles and how associated vector bundles arise in this context. (author)

  9. ''Identical'' bands in normally-deformed nuclei

    International Nuclear Information System (INIS)

    Garrett, J.D.; Baktash, C.; Yu, C.H.

    1990-01-01

    Gamma-ray transitions energies in neighboring odd- and even-mass nuclei for normally-deformed nuclear configurations are analyzed in a manner similar to recent analyses for superdeformed states. The moment of inertia is shown to depend on pair correlations and the aligned angular momentum of the odd nucleon. The implications of this analysis for ''identical'' super-deformed bands are discussed. 26 refs., 9 figs

  10. Deformation of shape memory alloys associated with twinned domain re-configurations

    International Nuclear Information System (INIS)

    Liu Yong; Van Humbeeck, J.; Xie Zeliang; Delaey, L.

    1999-01-01

    Most of the applications of shape memory alloys (SMAs) imply deformation of martensite; it is therefore one of the fundamental research topics on the shape memory effect. So far, several classifications of the deformation mechanisms have been made as a function of deformation amplitude. However, the deformation details of martensitic SMAs are still not yet satisfactorily understood and these classifications need to be refined, because several incoherencies have been found lately by mechanical testing and transmission electron microscopy (TEM) observations. The present work summarizes some new results on the deformation mechanisms of martensitic NiTi SMAs under tension. As a result, the deformation process of martensite twins as a function of the deformation strain amplitude is refined. (orig.)

  11. Loading Deformation Characteristic Simulation Study of Engineering Vehicle Refurbished Tire

    Science.gov (United States)

    Qiang, Wang; Xiaojie, Qi; Zhao, Yang; Yunlong, Wang; Guotian, Wang; Degang, Lv

    2018-05-01

    The paper constructed engineering vehicle refurbished tire computer geometry model, mechanics model, contact model, finite element analysis model, did simulation study on load-deformation property of engineering vehicle refurbished tire by comparing with that of the new and the same type tire, got load-deformation of engineering vehicle refurbished tire under the working condition of static state and ground contact. The analysis result shows that change rules of radial-direction deformation and side-direction deformation of engineering vehicle refurbished tire are close to that of the new tire, radial-direction and side-direction deformation value is a little less than that of the new tire. When air inflation pressure was certain, radial-direction deformation linear rule of engineer vehicle refurbished tire would increase with load adding, however, side-direction deformation showed linear change rule, when air inflation pressure was low; and it would show increase of non-linear change rule, when air inflation pressure was very high.

  12. Overview of deformable mirror technologies for adaptive optics and astronomy

    Science.gov (United States)

    Madec, P.-Y.

    2012-07-01

    From the ardent bucklers used during the Syracuse battle to set fire to Romans’ ships to more contemporary piezoelectric deformable mirrors widely used in astronomy, from very large voice coil deformable mirrors considered in future Extremely Large Telescopes to very small and compact ones embedded in Multi Object Adaptive Optics systems, this paper aims at giving an overview of Deformable Mirror technology for Adaptive Optics and Astronomy. First the main drivers for the design of Deformable Mirrors are recalled, not only related to atmospheric aberration compensation but also to environmental conditions or mechanical constraints. Then the different technologies available today for the manufacturing of Deformable Mirrors will be described, pros and cons analyzed. A review of the Companies and Institutes with capabilities in delivering Deformable Mirrors to astronomers will be presented, as well as lessons learned from the past 25 years of technological development and operation on sky. In conclusion, perspective will be tentatively drawn for what regards the future of Deformable Mirror technology for Astronomy.

  13. Amniotic Constriction Bands: Secondary Deformities and Their Treatments.

    Science.gov (United States)

    Drury, Benjamin T; Rayan, Ghazi M

    2018-01-01

    The purpose of this study was to report the surgical treatment experience of patients with amniotic constriction bands (ACB) over a 35-year interval and detail consequential limb deformities with emphasis on hands and upper extremities, along with the nature and frequency of their surgical treatment methods. Fifty-one patients were identified; 26 were males and 25 females. The total number of deformities was listed. The total number of operations, individual procedures, and operations plus procedures that were done for each patient and their frequency were recorded. The total number of operations was 117, and total number of procedures was 341. More procedures were performed on the upper extremity (85%) than the lower extremity (15%). Including the primary deformity ACB, 16 different hand deformities secondary to ACB were encountered. Sixteen different surgical methods for the upper extremity were utilized; a primary procedure for ACB and secondary reconstructions for all secondary deformities. Average age at the time of the first procedure was 9.3 months. The most common procedures performed, in order of frequency, were excision of ACB plus Z-plasty, release of partial syndactyly, release of fenestrated syndactyly, full-thickness skin grafts, resection of digital bony overgrowth from amputation stumps, and deepening of first and other digital web spaces. Many hand and upper extremity deformities secondary to ACB are encountered. Children with ACB may require more than one operation including multiple procedures. Numerous surgical methods of reconstruction for these children's secondary deformities are necessary in addition to the customary primary procedure of excision of ACB and Z-plasty.

  14. Prácticas de educación inclusiva en tres instituciones públicas de municipios de Itagui: Juan Nepomuceno Cadavid, Diego Echavarría Misas y Concejo Municipal de Itagui

    OpenAIRE

    Cardona Zapata, Carlos Alberto; Castaño Cortés, Erika; Lopera Ossa, Mónica Stella

    2016-01-01

    Tesis (Maestría en Educación y Desarrollo Humano). Universidad de Manizales. Facultad de Ciencias Sociales y Humanas. CINDE, 2016 El presente proyecto de investigación denominado “Prácticas de educación inclusiva en tres instituciones públicas del municipio de Itagüí: Juan Nepomuceno Cadavid, Diego Echavarría Misas y Concejo Municipal de Itagüí”, está fundado en tres debates, que para los investigadores son fundamentales: el de la concepción contemporánea del sujeto, el del paradigma educa...

  15. Island of stability for consistent deformations of Einstein's gravity.

    Science.gov (United States)

    Berkhahn, Felix; Dietrich, Dennis D; Hofmann, Stefan; Kühnel, Florian; Moyassari, Parvin

    2012-03-30

    We construct deformations of general relativity that are consistent and phenomenologically viable, since they respect, in particular, cosmological backgrounds. These deformations have unique symmetries in accordance with their Minkowski cousins (Fierz-Pauli theory for massive gravitons) and incorporate a background curvature induced self-stabilizing mechanism. Self-stabilization is essential in order to guarantee hyperbolic evolution in and unitarity of the covariantized theory, as well as the deformation's uniqueness. We show that the deformation's parameter space contains islands of absolute stability that are persistent through the entire cosmic evolution.

  16. Nucleon deformation from lattice QCD

    International Nuclear Information System (INIS)

    Tsapalis, A.

    2008-01-01

    The issue of nucleon and Delta(1232) deformation is discussed through the evaluation of the N to Delta electromagnetic transition and Delta electromagnetic form factors in Lattice QCD. The momentum dependence of the form factors is studied using 2+1 staggered dynamical flavors at pion masses as low as 350 MeV and compared to results obtained in the Wilson quenched and two-flavor dynamical theory at similar pion masses. The measurement of small non-zero quadrupole amplitudes, in agreement to recent experiments, establishes the existence of deformation in the N and Delta states. (author)

  17. Formal connections in deformation quantization

    DEFF Research Database (Denmark)

    Masulli, Paolo

    The field of this thesis is deformation quantization, and we consider mainly symplectic manifolds equipped with a star product. After reviewing basics in complex geometry, we introduce quantization, focusing on geometric quantization and deformation quantization. The latter is defined as a star...... characteristic class, and that formal connections form an affine space over the derivations of the star products. Moreover, if the parameter space for the family of star products is contractible, we obtain that any two flat formal connections are gauge equivalent via a self-equivalence of the family of star...

  18. Linajes holandricos en tres poblaciones del NO Argentino

    Directory of Open Access Journals (Sweden)

    Bailliet, Graciela

    2005-01-01

    Full Text Available Los marcadores bialélicos de la región específica del cromosoma Y han permitido identificar linajes propios de continentes, y a través de su distribución geográfica pueden reconstruirse movimientos migratorios de las poblaciones humanas. Se ha generado una filogenia confiable y se cuenta con una nomenclatura que facilita la interpretación de los resultados producidos en distintos laboratorios. En el presente trabajo se utilizaron 13 SNP seleccionados por estar presentes en las poblaciones originarias de América y en las parentales para los grupos inmigrantes recientes. El objetivo de este trabajo fue identificar el origen étnico de los linajes paternos de muestras de ADN provenientes de tres ciudades del NOA: Salta, Catamarca y Tucumán. Se identificaron 6 haplogrupos, los de origen europeo fueron los mayoritarios (67%; le siguió en frecuencia el haplogrupo propio de América (15%; también se observaron linajes YAP+ (7.5%. La distribución de la frecuencia de los haplogrupos diferenció a las muestras de Catamarca de las de Salta y Tucumán (P<0.001. La mayoría de los linajes moleculares propios de América se encontraron en muestras provenientes de individuos con apellidos foráneos (87.5. Esto refleja el efecto del largo contacto temporal entre las poblaciones nativas e inmigrantes recientes, así como la influencia cultural compleja en la trasmisión de los apellidos.

  19. Numerical Modeling of Subglacial Sediment Deformation

    DEFF Research Database (Denmark)

    Damsgaard, Anders

    2015-01-01

    may cause mass loss in the near future to exceed current best estimates. Ice flow in larger ice sheets focuses in fast-moving streams due to mechanical non-linearity of ice. These ice streams often move at velocities several magnitudes larger than surrounding ice and consequentially constitute...... glaciers move by deforming their sedimentary beds. Several modern ice streams, in particular, move as plug flows due to basal sediment deformation. An intense and long-winded discussion about the appropriate description for subglacial sediment mechanics followed this discovery, with good reason...... incompatible with commonly accepted till rheology models. Variation in pore-water pressure proves to cause reorganization in the internal stress network and leads to slow creeping deformation. The rate of creep is non-linearly dependent on the applied stresses. Granular creep can explain slow glacial...

  20. Nucleus spectroscopy: extreme masses and deformations

    International Nuclear Information System (INIS)

    Theisen, Ch.

    2009-12-01

    The author proposes a synthesis of research activities performed since 1995 in the field of experimental nuclear physics, and more particularly in the investigation of two nucleus extreme states: deformation on the one hand, heavy and very heavy nuclei on the other hand. After a presentation of the context of investigations on deformation, rotation, and heavy nuclei, he gives an overview of developments regarding instruments (gamma spectrometers, detection of fission fragments, and detection at the focal plane of spectrometers or separators) and analysis techniques. Experiments and results are then reported and discussed, concerning super-deformed states with a high angular moment, spectroscopy of neutron-rich nuclei, very heavy nuclei close to nucleus map borders. He finally draws perspectives for middle and long term studies on the heaviest nuclei

  1. Large poroelastic deformation of a soft material

    Science.gov (United States)

    MacMinn, Christopher W.; Dufresne, Eric R.; Wettlaufer, John S.

    2014-11-01

    Flow through a porous material will drive mechanical deformation when the fluid pressure becomes comparable to the stiffness of the solid skeleton. This has applications ranging from hydraulic fracture for recovery of shale gas, where fluid is injected at high pressure, to the mechanics of biological cells and tissues, where the solid skeleton is very soft. The traditional linear theory of poroelasticity captures this fluid-solid coupling by combining Darcy's law with linear elasticity. However, linear elasticity is only volume-conservative to first order in the strain, which can become problematic when damage, plasticity, or extreme softness lead to large deformations. Here, we compare the predictions of linear poroelasticity with those of a large-deformation framework in the context of two model problems. We show that errors in volume conservation are compounded and amplified by coupling with the fluid flow, and can become important even when the deformation is small. We also illustrate these results with a laboratory experiment.

  2. Particle fracture and plastic deformation in vanadium pentoxide

    Indian Academy of Sciences (India)

    Particle fracture and plastic deformation in vanadium pentoxide powders induced by high energy vibrational ball-mill ... Keywords. X-ray diffraction; ball-milling; plastic deformation; microstrain. ... Bulletin of Materials Science | News.

  3. MASTITIS GRANULOMATOSA IDIOPÁTICA Y MASTITIS DE CÉLULAS PLASMÁTICAS: EXPERIENCIA DE TRES AÑOS

    OpenAIRE

    Barrero P., Raúl; Benavides M., Alicia; León B., Manuel; Barrero V., David; Vargas V., Victoria

    2005-01-01

    Se evaluó el manejo de 13 pacientes con mastitis granulomatosa idiopática y mastitis de células plasmáticas, tratadas en el Hospital Félix Bulnes, por un período de tres años. Se estudió la relación con la edad, anticoncepción, embarazo, lactancia y la atopia. Se evaluaron las limitaciones de la mamografía y de la ecotomografía mamaria y el uso de la biopsia trucut. Se compararon los resultados del tratamiento médico y quirúrgico 13 patients with granulomatous mastitis and plasmatic cell m...

  4. Costos de los servicios prestados por los hoteles tres estrellas del municipio Libertador del estado Mérida

    Directory of Open Access Journals (Sweden)

    Marysela Coromoto Morillo Moreno

    2014-01-01

    Full Text Available A objeto de describir el proceso de determinación de costos de los servicios prestados por los hoteles turísticos de tres estrellas del municipio Libertador del estado Mérida, de cara a la optimización de dicho proceso, se diseñó una investigación no experimental, en la cual se recolectaron datos a través de un guión de observación y la aplicación de una encuesta a los gerentes y administradores de dichos establecimientos. Los resultados indican que los hoteles ofrecen diversas opciones de alojamiento, además de diversos servicios (restaurantes, salones para eventos y lavanderías, los cuales poseen tarifas separadas. Por otra parte, el 72% de los hoteles tres estrellas del municipio mencionado calculan el costo total de todos los servicios que prestan, lo cual evidencia la existencia de un sistema de acumulación de costos inadecuado que imposibilita la disposición de información exacta y precisa acerca del costo de cada uno de los servicios prestados, lo que a su vez limita la toma de decisiones y la correcta operatividad empresarial. En este sentido, se sugiere la identificación de los objetos de costos en centros funcionales y operativos, así como métodos de asignación para el cálculo del costo de cada servicio

  5. EVALUACIÓN QUIMICA DE LA FIBRA EN SEMILLA, PULPA Y CÁSCARA DE TRES VARIEDADES DE AGUACATE

    Directory of Open Access Journals (Sweden)

    ADELA MARÍA CEBALLOS P

    Full Text Available El sector agropecuario colombiano requiere integrarse al sector agroindustrial para aumentarle valor a sus productos y residuos. Utilizar residuos agrícolas y agroindustriales como materias primas para obtener metabolitos secundarios es tema de interés en investigación y busca dar respuestas al uso de esos residuos, mediante desarrollo de tecnologías aplicables al entorno colombiano. Se valoraron cáscara, semilla y pulpa de aguacate variedades Booth8, Trinidad y Papelillo en estados de madurez fisiológica (MF y consumo (MC. Se hizo caracterización bromatológica, contenido de fibra como carbohidratos solubles (CHOS, lignina LG, celulosa y hemicelulosa (CEL y HEMICEL y fibra bruta (FB según (Tappi Methods 1993, 1998, AOAC, 2001. Los resultados fueron analizados mediante ANOVA (P < 0,05 utilizando SAS V9.1. Los CHOS en los dos estados de madurez y para las tres variedades variaron entre 12-38% cáscara, 20-35% pulpa y 17-35% semilla; CEL y HEMICEL 8-50% cáscara, 7-26% pulpa, 1-5% semilla, los cuales pueden ser útiles como complementos de procesos biotecnológicos. La pulpa de las tres variedades tiene alto valor nutricional por sus contenidos de proteína, fibra y minerales. La composición de la cáscara y semilla podrían ser importantes para suplementos de dieta animal o como recuperador de suelos para la producción agrícola

  6. Consistency conditions and representations of a q-deformed Virasoro algebra

    International Nuclear Information System (INIS)

    Polychronakos, A.P.

    1990-01-01

    We derive deformations of the Virasoro algebra in terms of ''diffeomorphisms'' of functions on a discretized circle. The Curtright-Zachos deformation is recovered in one case, for deformation parameter a root of unity. Consistency conditions are then derived for this algebra by introducing the so-called ''braid-Jacobi'' identities. All the representations are subsequently found through use of these identities. Further, it is shown that no nontrivial central term can be incorporated, since it clashes with the consistency conditions. Finally, an alternative deformation is derived which generalizes the Drinfeld deformation of the Su(1,1) subgroup to the full algebra. 16 refs

  7. W-Cu composites subjected to heavy hot deformation

    International Nuclear Information System (INIS)

    Yu, Yang; Xu, Xiaoqiang; Zhang, Wencong

    2017-01-01

    The effect of plastic deformation on the properties and microstructure of W-Cu composites produced by multi-pass hot extrusion with steel cup was investigated. W-Cu composites were sintered at 1 100 C and then the sintered billets were firstly extruded at 900 C with different extrusion ratios. The second hot extrusion was performed at 900 C. The plastic deformation of copper phase plays a dominant part during the whole extrusion process. The microstructural evolution of W phase during the whole processing of heavy hot deformation can be divided into different stages. Experimental results indicate that the W agglomeration will be broken into fine particles effectively when the accumulated plastic deformation amounts to 97.6 % after the second extrusion.

  8. W-Cu composites subjected to heavy hot deformation

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Yang; Xu, Xiaoqiang; Zhang, Wencong [Harbin Institute of Technology-Weihai (China). School of Materials Science and Engineering

    2017-04-15

    The effect of plastic deformation on the properties and microstructure of W-Cu composites produced by multi-pass hot extrusion with steel cup was investigated. W-Cu composites were sintered at 1 100 C and then the sintered billets were firstly extruded at 900 C with different extrusion ratios. The second hot extrusion was performed at 900 C. The plastic deformation of copper phase plays a dominant part during the whole extrusion process. The microstructural evolution of W phase during the whole processing of heavy hot deformation can be divided into different stages. Experimental results indicate that the W agglomeration will be broken into fine particles effectively when the accumulated plastic deformation amounts to 97.6 % after the second extrusion.

  9. Un-equivalency theorem between deformed and undeformed Heisenberg-Weyl's algebras

    International Nuclear Information System (INIS)

    Zhang Jianzu

    2006-01-01

    Two fundamental issues about the relation between the deformed Heisenberg-Weyl algebra in noncommutative space and the undeformed one in commutative space are elucidated. First the un-equivalency theorem between two algebras is proved: the deformed algebra related to the undeformed one by a non-orthogonal similarity transformation is explored; furthermore, non-existence of a unitary similarity transformation which transforms the deformed algebra to the undeformed one is demonstrated. Secondly the uniqueness of realizing the deformed phase space variables via the undeformed ones is elucidated: both the deformed Heisenberg-Weyl algebra and the deformed bosonic algebra should be maintained under a linear transformation between two sets of phase space variables which fixes that such a linear transformation is unique. Elucidation of this un-equivalency theorem has basic meaning both in theory and experiment

  10. Corneal biomechanical properties from air-puff corneal deformation imaging

    Science.gov (United States)

    Marcos, Susana; Kling, Sabine; Bekesi, Nandor; Dorronsoro, Carlos

    2014-02-01

    The combination of air-puff systems with real-time corneal imaging (i.e. Optical Coherence Tomography (OCT), or Scheimpflug) is a promising approach to assess the dynamic biomechanical properties of the corneal tissue in vivo. In this study we present an experimental system which, together with finite element modeling, allows measurements of corneal biomechanical properties from corneal deformation imaging, both ex vivo and in vivo. A spectral OCT instrument combined with an air puff from a non-contact tonometer in a non-collinear configuration was used to image the corneal deformation over full corneal cross-sections, as well as to obtain high speed measurements of the temporal deformation of the corneal apex. Quantitative analysis allows direct extraction of several deformation parameters, such as apex indentation across time, maximal indentation depth, temporal symmetry and peak distance at maximal deformation. The potential of the technique is demonstrated and compared to air-puff imaging with Scheimpflug. Measurements ex vivo were performed on 14 freshly enucleated porcine eyes and five human donor eyes. Measurements in vivo were performed on nine human eyes. Corneal deformation was studied as a function of Intraocular Pressure (IOP, 15-45 mmHg), dehydration, changes in corneal rigidity (produced by UV corneal cross-linking, CXL), and different boundary conditions (sclera, ocular muscles). Geometrical deformation parameters were used as input for inverse finite element simulation to retrieve the corneal dynamic elastic and viscoelastic parameters. Temporal and spatial deformation profiles were very sensitive to the IOP. CXL produced a significant reduction of the cornea indentation (1.41x), and a change in the temporal symmetry of the corneal deformation profile (1.65x), indicating a change in the viscoelastic properties with treatment. Combining air-puff with dynamic imaging and finite element modeling allows characterizing the corneal biomechanics in-vivo.

  11. Hopf structure and Green ansatz of deformed parastatistics algebras

    Energy Technology Data Exchange (ETDEWEB)

    Aneva, Boyka [Institute for Nuclear Research and Nuclear Energy, Bulgarian Academy of Sciences, bld. Tsarigradsko chaussee 72, BG-1784 Sofia (Bulgaria); Popov, Todor [Institute for Nuclear Research and Nuclear Energy, Bulgarian Academy of Sciences, bld. Tsarigradsko chaussee 72, BG-1784 Sofia (Bulgaria)

    2005-07-22

    Deformed parabose and parafermi algebras are revised and endowed with Hopf structure in a natural way. The noncocommutative coproduct allows for construction of parastatistics Fock-like representations, built out of the simplest deformed Bose and Fermi representations. The construction gives rise to quadratic algebras of deformed anomalous commutation relations which define the generalized Green ansatz.

  12. Monitoring Bridge Dynamic Deformation in Vibration by Digital Photography

    Science.gov (United States)

    Yu, Chengxin; Zhang, Guojian; Liu, Xiaodong; Fan, Li; Hai, Hua

    2018-01-01

    This study adopts digital photography to monitor bridge dynamic deformation in vibration. Digital photography in this study is based on PST-TBPM (photographing scale transformation-time baseline parallax method). Firstly, we monitor the bridge in static as a zero image. Then, we continuously monitor the bridge in vibration as the successive images. Based on the reference points on each image, PST-TBPM is used to calculate the images to obtain the dynamic deformation values of these deformation points. Results show that the average measurement accuracies are 0.685 pixels (0.51mm) and 0.635 pixels (0.47mm) in X and Z direction, respectively. The maximal deformations in X and Z direction of the bridge are 4.53 pixels and 5.21 pixels, respectively. PST-TBPM is valid in solving the problem that the photographing direction is not perpendicular to the bridge. Digital photography in this study can be used to assess bridge health through monitoring the dynamic deformation of a bridge in vibration. The deformation trend curves also can warn the possible dangers over time.

  13. A position-dependent mass harmonic oscillator and deformed space

    Science.gov (United States)

    da Costa, Bruno G.; Borges, Ernesto P.

    2018-04-01

    We consider canonically conjugated generalized space and linear momentum operators x^ q and p^ q in quantum mechanics, associated with a generalized translation operator which produces infinitesimal deformed displacements controlled by a deformation parameter q. A canonical transformation (x ^ ,p ^ ) →(x^ q,p^ q ) leads the Hamiltonian of a position-dependent mass particle in usual space to another Hamiltonian of a particle with constant mass in a conservative force field of the deformed space. The equation of motion for the classical phase space (x, p) may be expressed in terms of the deformed (dual) q-derivative. We revisit the problem of a q-deformed oscillator in both classical and quantum formalisms. Particularly, this canonical transformation leads a particle with position-dependent mass in a harmonic potential to a particle with constant mass in a Morse potential. The trajectories in phase spaces (x, p) and (xq, pq) are analyzed for different values of the deformation parameter. Finally, we compare the results of the problem in classical and quantum formalisms through the principle of correspondence and the WKB approximation.

  14. Systematics in p-n interaction vs deformation

    International Nuclear Information System (INIS)

    Singh, M.; Singh, Yuvraj; Kumar, Rajesh; Vrshney, A.K.; Gupta, K.K.

    2017-01-01

    The correlation of integrated valance p-n interaction in the onset of collectivity and deformation has been described phenomenologically in terms of N p N n scheme. L. Esser et al. presented the graphs between N p N n and deformation β and γ for some heavy nuclei

  15. Nación, escritura y duelo: Sobre tres crónicas de Edgardo Rodríguez Juliá

    Directory of Open Access Journals (Sweden)

    Carolina Sancholuz

    1998-11-01

    Full Text Available El presente artículo se propone, a través del análisis de tres 'crónicas' de Edgardo Rodríguez Juliá, indagar el problema de la 'identidad nacional', cuestión central en la conformación de la literatura puertorriqueña, la cual se funda, según lo afirma Juan Gelpí, en una contradicción aparente: la construcción de una literatura nacional en un país que no se ha constituido como nación independiente. La hibridez del género crónica, según el particular uso que hace del mismo Rodríguez Juliá, le permite al autor evadir el rígido formalismo del ensayo, modelo discursivo canónico de las pasadas generaciones literarias puertorriqueñas, para dar cuenta, sin embargo, de un mismo objeto de reflexión: la sociedad puertorriqueña, la noción freudiana de duelo por una parte, y la sostenida autorreflexión sobre la práctica de la escritura presentes en las tres crónicas, por otra, permiten la articulación de los conceptos de pérdida y producción, categorías que complejizan la noción misma de identidad

  16. Effect of contact deformation on contact electrification: a first-principles calculation

    International Nuclear Information System (INIS)

    Zhang, Yuanyue; Shao, Tianmin

    2013-01-01

    The effect of contact deformation on contact electrification of metallic materials was studied by the first-principles method. The results of charge population and the densities of states of the deformed contact models demonstrated that the magnitude of the transferred charge increased with deformation. The mechanism of the effect of deformation was investigated by studying the electronic properties of the deformed surface slabs. The results showed that crystal deformation led to a change in the electrostatic potential of the metal, where the number of nearly free electrons and unoccupied orbitals for charge transfer increased, and their energy barrier decreased. (paper)

  17. Deformation of in-service pressure tubes

    International Nuclear Information System (INIS)

    Sarce, A.L.

    1993-01-01

    Candu type nuclear reactor pressure tubes suffer deformations during operation. This are consequences of irradiation growth and creep. By means of a computer code which takes into account the material microstructure, the above mentioned deformations are calculated, and results are compared with corresponding values measured at Embalse nuclear power plant. The calculations make explicit inclusion of intergranular stresses caused by an isotropy in the material. (author). 1 ref

  18. The "pixie" ear deformity following face lift surgery revisited.

    Science.gov (United States)

    Mowlavi, Arian; Meldrum, D Garth; Wilhelmi, Bradon J; Russell, Robert C; Zook, Elvin G

    2005-04-01

    The "pixie" ear deformity can be recognized by its "stuck on" or "pulled" appearance, which is caused by the extrinsic pull of the medial cheek and jawline skin flaps at the earlobe attachment point, the otobasion inferius. The tension results in migration of the otobasion inferius from a posterior cephalad position to an anterior caudal position. Although this deformity has been described clinically, it has yet to be objectively defined. Recently, the two components of the earlobe, the attached cephalic segment (intertragal to otobasion inferius distance) and the free caudal segment (otobasion inferius to subaurale distance), were shown to be essential in evaluating for earlobe ptosis and pseudoptosis. These two components can be used to designate an objective criterion for the pixie ear deformity. The deformity, as defined by the authors' parameters, was assessed in 44 patients who had undergone rhytidectomy. A simple and accurate surgical treatment is demonstrated by a cadaver dissection and a clinical case. The deformity can be defined as an increase in the attached cephalic segment (intertragal to otobasion inferius distance) and a decrease in the free caudal segment (otobasion inferius to subaurale distance) to 0 mm following rhytidectomy. The incidence of pixie ear deformity was 5.7 percent in the authors' series of patients. A medially based triangular excision over the attached cephalic segment is presented as a simple and accurate surgical treatment of pixie ear deformity. A more accurate and objective designation may allow for improved detection, avoidance, and treatment of this deformity.

  19. Árboles forrajeros de tres regiones ganaderas de Chiapas, México: Usos y características nutricionales

    OpenAIRE

    Pinto-Ruiz, R; Hernández, D; Gómez, Η; Cobos, ΜΑ; Quiroga, R; Pezo, D

    2010-01-01

    El trabajo tuvo como objetivo conocer las plantas leñosas que poseen potencial forrajero de tres regiones ganaderas de Chiapas, México e identificar usos, composición química y características de degradación ruminal. Se aplicó un cuestionario a productores pecuarios de la región Costa, Frontera y Norte de Chiapas. Los resultados de la encuesta se procesaron utilizando frecuencias y porcentajes. El diagnóstico obtenido derivó en el conocimiento de 103 especies leñosas reconocidas como proveedo...

  20. Deformability of Oxide Inclusions in Tire Cord Steels

    Science.gov (United States)

    Zhang, Lifeng; Guo, Changbo; Yang, Wen; Ren, Ying; Ling, Haitao

    2018-04-01

    The deformation of oxide inclusions in tire cord steels during hot rolling was analyzed, and the factors influencing their deformability at high and low temperatures were evaluated and discussed. The aspect ratio of oxide inclusions decreased with the increasing reduction ratio of the steel during hot rolling owing to the fracture of the inclusions. The aspect ratio obtained after the first hot-rolling process was used to characterize the high-temperature deformability of the inclusions. The deformation first increased and then decreased with the increasing (MgO + Al2O3)/(SiO2 + MnO) ratio of the inclusions. It also increased with the decreasing melting temperatures of the inclusions. Young's modulus was used to evaluate the low-temperature deformability of the inclusions. An empirical formula was fitted to calculate the Young's moduli of the oxides using the mean atomic volume. The moduli values of the inclusions causing wire fracture were significantly greater than the average. To reduce fracture in tire cord steel wires during cold drawing, it is proposed that inclusions be controlled to those with high SiO2 content and extremely low Al2O3 content. This proposal is based on the hypothesis that the deformabilities of oxides during cold drawing are inversely proportional to their Young's moduli. The future study thus proposed includes an experimental confirmation for the abovementioned predictions.

  1. Compensation of some time dependent deformations in two dimensional (2D) tomography

    International Nuclear Information System (INIS)

    Desbat, L.; Roux, S.; Grangeat, P.

    2005-01-01

    This work is a contribution to motion compensation in tomography. It has been shown that much more general deformations than affine transforms can be analytically compensated in dynamic tomography. The class of deformations that transformed only a parallel projection geometry into an other parallel projection geometry, or a divergent projection geometry into an other divergent geometry have been considered. Among these deformation, it has been shown that those involving only an affine deformation along each line (this affine deformation can vary from line to line), can be efficiently analytically compensated, i e within a F.B.P. algorithm. This class of deformations is much larger than the very small class of affine deformation. It involves more local deformation possibilities. Deformations from this considered class have been written as a composition of an affine transform and deformations that can be compensated with weighting and re-binning step, the admissibility conditions and the F.B.P. algorithm are the same those given. (N.C.)

  2. Compensation of some time dependent deformations in two dimensional (2D) tomography

    Energy Technology Data Exchange (ETDEWEB)

    Desbat, L. [Universite Joseph Fourier, UMR CNRS 5525, 38 - Grenoble (France); Roux, S. [Universite Joseph Fourier, TIMC-IMAG, In3S, Faculte de Medecine, 38 - Grenoble (France)]|[CEA Grenoble, Lab. d' Electronique et de Technologie de l' Informatique (LETI), 38 (France); Grangeat, P. [CEA Grenoble, Lab. d' Electronique et de Technologie de l' Informatique (LETI), 38 (France)

    2005-07-01

    This work is a contribution to motion compensation in tomography. It has been shown that much more general deformations than affine transforms can be analytically compensated in dynamic tomography. The class of deformations that transformed only a parallel projection geometry into an other parallel projection geometry, or a divergent projection geometry into an other divergent geometry have been considered. Among these deformation, it has been shown that those involving only an affine deformation along each line (this affine deformation can vary from line to line), can be efficiently analytically compensated, i e within a F.B.P. algorithm. This class of deformations is much larger than the very small class of affine deformation. It involves more local deformation possibilities. Deformations from this considered class have been written as a composition of an affine transform and deformations that can be compensated with weighting and re-binning step, the admissibility conditions and the F.B.P. algorithm are the same those given. (N.C.)

  3. Study of fine structure of deformed hafnium

    International Nuclear Information System (INIS)

    Voskresenskaya, L.A.; Petukhova, A.S.; Kovalev, K.S.

    1978-01-01

    Variations in the hafnium fine structure following the cold plastic deformation have been studied. The fine structure condition has been studied through the harmonic analysis of the profile of the X-ray diffraction line, obtained at the DRON-I installation. Received has been the dependence of the crystal lattice microdistortions value on the deformation extent for hafnium. This dependence is compared with the corresponding one for zirconium. It is found out that at all the deformations the microdistortion distribution is uniform. The microdistortion value grows with the increase in the compression. During the mechanical impact higher microdistortions of the crystal lattice occur in the hafnium rather than in zirconium

  4. Twist deformations of the supersymmetric quantum mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Castro, P.G.; Chakraborty, B.; Toppan, F., E-mail: pgcastro@cbpf.b, E-mail: biswajit@bose.res.i, E-mail: toppan@cbpf.b [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil); Kuznetsova, Z., E-mail: zhanna.kuznetsova@ufabc.edu.b [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil)

    2009-07-01

    The N-extended supersymmetric quantum mechanics is deformed via an abelian twist which preserves the super-Hopf algebra structure of its universal enveloping superalgebra. Two constructions are possible. For even N one can identify the 1D N-extended superalgebra with the fermionic Heisenberg algebra. Alternatively, supersymmetry generators can be realized as operators belonging to the Universal Enveloping Superalgebra of one bosonic and several fermionic oscillators. The deformed system is described in terms of twisted operators satisfying twist deformed (anti)commutators. The main differences between an abelian twist defined in terms of fermionic operators and an abelian twist defined in terms of bosonic operators are discussed. (author)

  5. Deformation dependent TUL multi-step direct model

    International Nuclear Information System (INIS)

    Wienke, H.; Capote, R.; Herman, M.; Sin, M.

    2008-01-01

    The Multi-Step Direct (MSD) module TRISTAN in the nuclear reaction code EMPIRE has been extended to account for nuclear deformation. The new formalism was tested in calculations of neutron emission spectra emitted from the 232 Th(n,xn) reaction. These calculations include vibration-rotational Coupled Channels (CC) for the inelastic scattering to low-lying collective levels, 'deformed' MSD with quadrupole deformation for inelastic scattering to the continuum, Multi-Step Compound (MSC) and Hauser-Feshbach with advanced treatment of the fission channel. Prompt fission neutrons were also calculated. The comparison with experimental data shows clear improvement over the 'spherical' MSD calculations and JEFF-3.1 and JENDL-3.3 evaluations. (authors)

  6. Faraday instability in deformable domains

    International Nuclear Information System (INIS)

    Pucci, G.

    2013-01-01

    Hydrodynamical instabilities are usually studied either in bounded regions or free to grow in space. In this article we review the experimental results of an intermediate situation, in which an instability develops in deformable domains. The Faraday instability, which consists in the formation of surface waves on a liquid experiencing a vertical forcing, is triggered in floating liquid lenses playing the role of deformable domains. Faraday waves deform the lenses from the initial circular shape and the mutual adaptation of instability patterns with the lens boundary is observed. Two archetypes of behaviour have been found. In the first archetype a stable elongated shape is reached, the wave vector being parallel to the direction of elongation. In the second archetype the waves exceed the response of the lens border and no equilibrium shape is reached. The lens stretches and eventually breaks into fragments that have a complex dynamics. The difference between the two archetypes is explained by the competition between the radiation pressure the waves exert on the lens border and its response due to surface tension.

  7. Deformation of high-temperature superconductors

    International Nuclear Information System (INIS)

    Goretta, K.C.; Routbort, J.L.; Miller, D.J.; Chen, N.; Dominguez-Rodriguez, A.; Jimenez-Melendo, M.; De Arellano-Lopez, A.R.

    1994-08-01

    Of the many families of high-temperature superconductors, only the properties of those discovered prior to 1989 - Y-Ba-Cu-O, Tl-Ba(Sr)-Ca-Cu-O, and Bi(Pb)-Sr-Ca-Cu-O - have been studied extensively. Deformation tests have been performed on YBa 2 Cu 3 O x (Y-123), YBa 2 Cu 4 O x (Y-124), TlBa 2 Ca 2 Cu 3 O x (Bi-2223). The tests have revealed that plasticity is generally limited in these compounds and that the rate-controlling diffusional kinetics for creep are very slow. Nevertheless, hot forming has proved to be quite successful for fabrication of bulk high-temperature superconductors, so long as deformation rates are low or large hydrostatic stresses are applied. Steady-state creep data have proved to be useful in designing optimal heat treatments for superconductors and in support of more-fundamental diffusion experiments. The high-temperature superconductors are highly complex oxides, and it is a challenge to understand their deformation responses. In this paper, results of interest and operant creep mechanisms will be reviewed

  8. Mechanics of deformations in terms of scalar variables

    Science.gov (United States)

    Ryabov, Valeriy A.

    2017-05-01

    Theory of particle and continuous mechanics is developed which allows a treatment of pure deformation in terms of the set of variables "coordinate-momentum-force" instead of the standard treatment in terms of tensor-valued variables "strain-stress." This approach is quite natural for a microscopic description of atomic system, according to which only pointwise forces caused by the stress act to atoms making a body deform. The new concept starts from affine transformation of spatial to material coordinates in terms of the stretch tensor or its analogs. Thus, three principal stretches and three angles related to their orientation form a set of six scalar variables to describe deformation. Instead of volume-dependent potential used in the standard theory, which requires conditions of equilibrium for surface and body forces acting to a volume element, a potential dependent on scalar variables is introduced. A consistent introduction of generalized force associated with this potential becomes possible if a deformed body is considered to be confined on the surface of torus having six genuine dimensions. Strain, constitutive equations and other fundamental laws of the continuum and particle mechanics may be neatly rewritten in terms of scalar variables. Giving a new presentation for finite deformation new approach provides a full treatment of hyperelasticity including anisotropic case. Derived equations of motion generate a new kind of thermodynamical ensemble in terms of constant tension forces. In this ensemble, six internal deformation forces proportional to the components of Irving-Kirkwood stress are controlled by applied external forces. In thermodynamical limit, instead of the pressure and volume as state variables, this ensemble employs deformation force measured in kelvin unit and stretch ratio.

  9. On the deformed Einstein equations and quantum black holes

    International Nuclear Information System (INIS)

    Dil, E; Ersanli, C C; Kolay, E

    2016-01-01

    Recently q -deformed Einstein equations have been studied for extremal quantum black holes which have been proposed to obey deformed statistics by Strominger. In this study, we give the solutions of deformed Einstein equations by considering these equations for the charged black holes. Also we present the implications of the solutions, such as the deformation parameters lead the charged black holes to have a smaller mass than the classical Reissner- Nordstrom black holes. The reduction in mass of a classical black hole can be viewed as a transition from classical to quantum black hole regime. (paper)

  10. Vertebral column deformities in farmed rainbow trout ( Oncorhynchus mykiss )

    DEFF Research Database (Denmark)

    Madsen, Lone; Dalsgaard, Inger

    1999-01-01

    Farmed rainbow trout (Oncorhynchus mykiss) were fed diets with either different levels of vitamin C, or diets enriched with glucan or chitin, from feeding start and 6 months onwards. At an average weight of 100 g, the trout were X-rayed to determine the deformity level. The investigations showed...... of deformities (4.8%). In all groups examined, the deformities were spread over the whole vertebral column. The deformities in the group fed the low vitamin C diet were more severe than those found in the other groups. An outbreak of the disease rainbow trout fry syndrome (RTFS) caused by the bacterium...

  11. Introduction of a deformable x-ray CT polymer gel dosimetry system

    Science.gov (United States)

    Maynard, E.; Heath, E.; Hilts, M.; Jirasek, A.

    2018-04-01

    This study introduces the first 3D deformable dosimetry system based on x-ray computed tomography (CT) polymer gel dosimetry and establishes the setup reproducibility, deformation characteristics and dose response of the system. A N-isopropylacrylamide (NIPAM)-based gel formulation optimized for x-ray CT gel dosimetry was used, with a latex balloon serving as the deformable container and low-density polyethylene and polyvinyl alcohol providing additional oxygen barrier. Deformable gels were irradiated with a 6 MV calibration pattern to determine dosimetric response and a dosimetrically uniform plan to determine the spatial uniformity of the response. Wax beads were added to each gel as fiducial markers to track the deformation and setup of the gel dosimeters. From positions of the beads on CT images the setup reproducibility and the limits and reproducibility of gel deformation were determined. Comparison of gel measurements with Monte Carlo dose calculations found excellent dosimetric accuracy, comparable to that of an established non-deformable dosimetry system, with a mean dose discrepancy of 1.5% in the low-dose gradient region and a gamma pass rate of 97.9% using a 3%/3 mm criterion. The deformable dosimeter also showed good overall spatial dose uniformity throughout the dosimeter with some discrepancies within 20 mm of the edge of the container. Tracking of the beads within the dosimeter found that sub-millimetre setup accuracy is achievable with this system. The dosimeter was able to deform and relax when externally compressed by up to 30 mm without sustaining any permanent damage. Internal deformations in 3D produced average marker movements of up to 12 mm along the direction of compression. These deformations were also shown to be reproducible over 100 consecutive deformations. This work has established several important characteristics of a new deformable dosimetry system which shows promise for future clinical applications, including the

  12. Contour junctions defined by dynamic image deformations enhance perceptual transparency.

    Science.gov (United States)

    Kawabe, Takahiro; Nishida, Shin'ya

    2017-11-01

    The majority of work on the perception of transparency has focused on static images with luminance-defined contour junctions, but recent work has shown that dynamic image sequences with dynamic image deformations also provide information about transparency. The present study demonstrates that when part of a static image is dynamically deformed, contour junctions at which deforming and nondeforming contours are connected facilitate the deformation-based perception of a transparent layer. We found that the impression of a transparent layer was stronger when a dynamically deforming area was adjacent to static nondeforming areas than when presented alone. When contour junctions were not formed at the dynamic-static boundaries, however, the impression of a transparent layer was not facilitated by the presence of static surrounding areas. The effect of the deformation-defined junctions was attenuated when the spatial pattern of luminance contrast at the junctions was inconsistent with the perceived transparency related to luminance contrast, while the effect did not change when the spatial luminance pattern was consistent with it. In addition, the results showed that contour completions across the junctions were required for the perception of a transparent layer. These results indicate that deformation-defined junctions that involve contour completion between deforming and nondeforming regions enhance the perception of a transparent layer, and that the deformation-based perceptual transparency can be promoted by the simultaneous presence of appropriately configured luminance and contrast-other features that can also by themselves produce the sensation of perceiving transparency.

  13. Plastic deformation of cubic zirconia single crystals at 1400 C

    International Nuclear Information System (INIS)

    Baufeld, B.; Baither, D.; Bartsch, M.; Messerschmidt, U.

    1998-01-01

    Cubic zirconia single crystals stabilized with 11 mol% yttria were deformed in air at 1400 C and around 1200 C at different strain rates along [1 anti 12] and [100] compression directions. The strain rate sensitivity of the flow stress was determined by strain rate cycling and stress relaxation tests. The microstructure of the deformed specimens was investigated by transmission high-voltage electron microscopy, including contrast extinction analysis for determining the Burgers vectors as well as stereo pairs and wide-angle tilting experiments to find the active slip planes. At deformation along [1 anti 12], the primary and secondary slip planes are of {100} type. Previous experiments had shown that the dislocations move easily on these planes in an athermal way. During deformation along [100], mainly dislocations on {100} planes are activated, which move in a viscous way by the aid of thermal activation. The discussion of the different deformation behaviours during deformation along [1 anti 12] and [100] is based on the different dynamic properties of dislocations and the fact that recovery is an essential feature of the deformation of cubic zirconia at 1400 C. The results on the shape of the deformation curve and the strain rate sensitivity of the flow stress are partly at variance with those of previous authors. (orig.)

  14. [Babies with cranial deformity].

    Science.gov (United States)

    Feijen, Michelle M W; Claessens, Edith A W M Habets; Dovens, Anke J Leenders; Vles, Johannes S; van der Hulst, Rene R W J

    2009-01-01

    Plagiocephaly was diagnosed in a baby aged 4 months and brachycephaly in a baby aged 5 months. Positional or deformational plagio- or brachycephaly is characterized by changes in shape and symmetry of the cranial vault. Treatment options are conservative and may include physiotherapy and helmet therapy. During the last two decades the incidence of positional plagiocephaly has increased in the Netherlands. This increase is due to the recommendation that babies be laid on their backs in order to reduce the risk of sudden infant death syndrome. We suggest the following: in cases of positional preference of the infant, referral to a physiotherapist is indicated. In cases of unacceptable deformity of the cranium at the age 5 months, moulding helmet therapy is a possible treatment option.

  15. A new classification for 'Pistol Grip Deformity'. Correlation between the severity of the deformity and the grade of osteoarthritis of the hip

    International Nuclear Information System (INIS)

    Ipach, Ingmar; Mittag, F.; Sachsenmaier, S.; Kluba, T.; Heinrich, P.

    2011-01-01

    Purpose: Two types of femoroacetabular impingement (FAI) are described as reasons for the early development of osteoarthritis of the hip. Cam impingement develops from contact between an abnormal head-neck junction and the acetabular rim. Pincer impingement is characterized by local or general overcoverage of the femoral head by the acetabular rim. Both forms might cause early osteoarthritis of the hip. A decreased head/neck offset has been recognized on AP pelvic views and labeled as 'pistol grip deformity'. The aim of the study was to develop a classification for this deformity with regard to the stage of osteoarthritis of the hip. Materials and Methods: 76 pelvic and axial views were analyzed for alpha angle and head ratio. 22 of them had a normal shape in the head-neck region and no osteoarthritis signs, 27 had a 'pistol grip deformity' and osteoarthritis I and 27 had a 'pistol grip deformity' and osteoarthritis II -IV . The CART method was used to develop a classification. Results: There was a statistically significant correlation between alpha angle and head ratio. A statistically significant difference in alpha angle and head ratio was seen between the three groups. Using the CART method, we developed a three-step classification system for the 'pistol grip deformity' with very high accuracy. This deformity was aggravated by increasing age. Conclusion: Using this model it is possible to differentiate between normal shapes of the head-neck junction and different severities of the pistol grip deformity. (orig.)

  16. Hot compression deformation behavior of AISI 321 austenitic stainless steel

    Science.gov (United States)

    Haj, Mehdi; Mansouri, Hojjatollah; Vafaei, Reza; Ebrahimi, Golam Reza; Kanani, Ali

    2013-06-01

    The hot compression behavior of AISI 321 austenitic stainless steel was studied at the temperatures of 950-1100°C and the strain rates of 0.01-1 s-1 using a Baehr DIL-805 deformation dilatometer. The hot deformation equations and the relationship between hot deformation parameters were obtained. It is found that strain rate and deformation temperature significantly influence the flow stress behavior of the steel. The work hardening rate and the peak value of flow stress increase with the decrease of deformation temperature and the increase of strain rate. In addition, the activation energy of deformation ( Q) is calculated as 433.343 kJ/mol. The microstructural evolution during deformation indicates that, at the temperature of 950°C and the strain rate of 0.01 s-1, small circle-like precipitates form along grain boundaries; but at the temperatures above 950°C, the dissolution of such precipitates occurs. Energy-dispersive X-ray analyses indicate that the precipitates are complex carbides of Cr, Fe, Mn, Ni, and Ti.

  17. Deformed Reality: Proof of concept and preliminary results

    OpenAIRE

    Haouchine , Nazim; Petit , Antoine; Roy , Frederick; Cotin , Stéphane

    2017-01-01

    International audience; We introduce " Deformed Reality " , a new paradigm to interactively manipulate objects in a scene in a deformable manner. Using the core principle of augmented reality to estimate rigid pose over time, our method enables the user to deform the targeted object while it is being rendered with its natural texture, giving the sense of a real-time object editing in user environment. The presented results show that our method can open new ways of using augmented reality by n...

  18. Determination of shell energies. Nuclear deformations and fission barriers

    International Nuclear Information System (INIS)

    Koura, Hiroyuki; Tachibana, Takahiro; Uno, Masahiro; Yamada, Masami.

    1996-01-01

    We have been studying a method of determining nuclear shell energies and incorporating them into a mass formula. The main feature of this method lies in estimating shell energies of deformed nuclei from spherical shell energies. We adopt three assumptions, from which the shell energy of a deformed nucleus is deduced to be a weighted sum of spherical shell energies of its neighboring nuclei. This shell energy should be called intrinsic shell energy since the average deformation energy also acts as an effective shell energy. The ground-state shell energy of a deformed nucleus and its equilibrium shape can be obtained by minimizing the sum of these two energies with respect to variation of deformation parameters. In addition, we investigate the existence of fission isomers for heavy nuclei with use of the obtained shell energies. (author)

  19. Study of structural changes during deformation of polycrystal vanadium

    International Nuclear Information System (INIS)

    Zubets, Yu.E.; Manilov, V.A.; Sarzhan, G.F.; Trefilov, V.I.; Firstov, S.A.

    1978-01-01

    Investigated were the polycrystalline vanadium dislocation structure formed within the range of temperatures between 20 and 1000 deg C and in the interval of deformations between 5 and 94%. The diagram of states was established in the temperature vs. degree of deformation coordinates from electron microscopy data. It was shown that a deformation of 5-7% leads to the appearance in the structure of incorrect shape dislocations with a lot of jogs and kinks. The density of relatively homogeneously distributed dislocations increases with the degree of deformation up to the latter's value of 50%. At a deformation greater than 50%, there forms a cellular structure, there remaining ranges where no cellular structure is formed. Thus, there appears a two-component texture with a different level of internal stresses. Annealing of such a material gives rise to areas of different types of cellular structure

  20. Void formation by annealing of neutron-irradiated plastically deformed molybdenum

    International Nuclear Information System (INIS)

    Petersen, K.; Nielsen, B.; Thrane, N.

    1976-01-01

    The positron annihilation technique has been used in order to study the influence of plastic deformation on the formation and growth of voids in neutron irradiated molybdenum single crystals treated by isochronal annealing. Samples were prepared in three ways: deformed 12-19% before irradiation, deformed 12-19% after irradiation, and - for reference purposes -non-deformed. In addition a polycrystalline sample was prepared in order to study the influence of the grain boundaries. All samples were irradiated at 60 0 C with a flux of 2.5 x 10 18 fast neutrons/cm 2 . After irradiation the samples were subjected to isochronal annealing. It was found that deformation before irradiation probably enhanced the formation of voids slightly. Deformation after irradiation strongly reduced the void formation. The presence of grain boundaries in the polycrystalline sample had a reducing influence on the growth of voids. (author)

  1. Viscoelastic deformation of lipid bilayer vesicles†

    Science.gov (United States)

    Wu, Shao-Hua; Sankhagowit, Shalene; Biswas, Roshni; Wu, Shuyang; Povinelli, Michelle L.

    2015-01-01

    Lipid bilayers form the boundaries of the cell and its organelles. Many physiological processes, such as cell movement and division, involve bending and folding of the bilayer at high curvatures. Currently, bending of the bilayer is treated as an elastic deformation, such that its stress-strain response is independent of the rate at which bending strain is applied. We present here the first direct measurement of viscoelastic response in a lipid bilayer vesicle. We used a dual-beam optical trap (DBOT) to stretch 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) giant unilamellar vesicles (GUVs). Upon application of a step optical force, the vesicle membrane deforms in two regimes: a fast, instantaneous area increase, followed by a much slower stretching to an eventual plateau deformation. From measurements of dozens of GUVs, the average time constant of the slower stretching response was 0.225 ± 0.033 s (standard deviation, SD). Increasing the fluid viscosity did not affect the observed time constant. We performed a set of experiments to rule out heating by laser absorption as a cause of the transient behavior. Thus, we demonstrate here that the bending deformation of lipid bilayer membranes should be treated as viscoelastic. PMID:26268612

  2. Magnetic properties of cyclically deformed austenite

    Energy Technology Data Exchange (ETDEWEB)

    Das, Arpan, E-mail: dasarpan1@yahoo.co.in

    2014-06-01

    In meta-stable austenitic stainless steels, low cycle fatigue deformation is accompanied by a partial stress/strain-induced solid state phase transformation of paramagnetic γ(fcc) austenite phase to ferromagnetic α{sup /}(bcc) martensite. The measured characteristic of magnetic properties, which are the saturation magnetization, susceptibility, coercivity, retentivity, and the area under the magnetic hysteresis loop are sensitive to the total strain amplitude imposed and the corresponding material behaviour. The morphologies and nucleation characteristics of deformation induced martensites (i.e., ϵ(hcp), α{sup /}(bcc)) have been investigated through analytical transmission electron microscope. It has been observed that deformation induced martensites can nucleate at a number of sites (i.e., shear band intersections, isolated shear bands, shear band–grain boundary intersection, grain boundary triple points, etc.) through multiple transformation sequences: γ(fcc)→ϵ(hcp), γ(fcc)→ϵ(hcp)→α{sup /}(bcc), γ(fcc)→ deformation twin →α{sup /}(bcc) and γ(fcc)→α{sup /}(bcc). - Highlights: • LCF tests were done at various strain amplitudes of 304LNSS. • Quantification of martensite was done through ferritecope. • Magnetic properties were characterised through VSM. • Correlation of magnetic properties with the cyclic plastic response was done. • TEM was done to investigate the transformation micro-mechanisms.

  3. q-deformed conformal and Poincare algebras on quantum 4-spinors

    International Nuclear Information System (INIS)

    Kobayashi, Tatsuo; Uematsu, Tsuneo

    1993-01-01

    We investigate quantum deformation of conformal algebras by constructing the quantum space for sl q (4). The differential calculus on the quantum space and the action of the quantum generators are studied. We derive deformed su(2, 2) algebra from the deformed sl(4) algebra using the quantum 4-spinor and its conjugate spinor. The quantum 6-vector in so q (4, 2) is constructed as a tensor product of two sets of 4-spinors. We obtain the q-deformed conformal algebra with the suitable assignment of the generators which satisfy the reality condition. The deformed Poincare algebra is derived through a contraction procedure. (orig.)

  4. Aislamiento de tres cepas de Leishmanía a partir de Lutzomyia Trapidoi en Colombia

    Directory of Open Access Journals (Sweden)

    Alberto Morales

    1981-12-01

    Full Text Available En un foco de Leishmaniasis Cutánea en un bosque en la vereda Flor Azul, municipio de Mariquita, Departamento del Tolima, Colombia, se recolectaron, usando trampas de luz (C D C, trampas Shannon. cebo humano, cebo animal (caballo y captura en huecos de árboles de febrero de 1979 a mayo de 1981, un total de 4.081 y 7.912 de Lutzomyia (Diptera, Psychodidae, las cuales pertenecían a 19 especies. De las 7.912 hembras recolectadas se hizo disección del tubo digestivo a 3.337 multíparas en busca de flagelados, los cuales se encontraron en: una Lutzomyia shannoni, una Lutzomyia gomeziy cuarenta y dos Lutzomyia trapidoi. De estos 44 intestinos con flagelados se inocularon 32 hamsters, con el siguiente resultado: 2 hamsters murieron por causas desconocidas (el de L. shannoni y L. gomezl;  de 30 hamsters inoculados con flagelados hallados en intestino de L. trapidoi tres fueron positivos para Leishmanai, 12 permanecen en observación y son negativos hasta la fecha y 15 murieron por causas desconocidas. Las tres cepas de Leishmania aisladas de L. trapidoise mantienen en hamsters y en cultivos en medio de las 4 N. Del total de 2.869 hembras de Lutzomyia trapidoi disectadas. 2.356 eran multíparas; de éstas se encontraron 42 con flagelados en el intestino. Por la localización de los flagelados en el intestino anterior de L. trapidoi en una de las cepas aisladas, por el tan corto período de incubación de las cepas inoculadas en el hamster y por la facilidad con la cual se cultivan, es posible pensar que estas cepas pertenezcan al complejo Leishmania mexicana. Esta es la primera vez que en Colombia se aislan cepas de Leishmania del intestino del insecto vector.

  5. Transmission coefficents in strongly deformed nuclei

    International Nuclear Information System (INIS)

    Aleshin, V.P.

    1996-01-01

    By using our semiclassical approach to particle evaporation from deformed nuclei developed earlier, we analyze here the heuristic methods of taking into account the effects of shape deformations on particle emission. These methods are based on the 'local' transmission coefficients in which the effective barrier depends on the angle with respect to the symmetry axis. The calculations revealed that the heuristic models are reasonable for particle energy spectra but fail, at large deformations, to describe the angular distributions. In A∼160 nuclei with axis ratio in the vicinity of 2:1 at temperatures of 2-3 MeV, the W (90 )/W(0 ) anisotropies of α particles with respect to the nuclear spin are 1.5 to 3 times larger than our approach predicts. The influence of spin alignment on particle energy spectra is discussed shortly. (orig.)

  6. Non-linear elastic deformations

    CERN Document Server

    Ogden, R W

    1997-01-01

    Classic in the field covers application of theory of finite elasticity to solution of boundary-value problems, analysis of mechanical properties of solid materials capable of large elastic deformations. Problems. References.

  7. Application of the Periodic Average System Model in Dam Deformation Analysis

    Directory of Open Access Journals (Sweden)

    Yueqian Shen

    2015-01-01

    Full Text Available Dams are among the most important hydraulic engineering facilities used for water supply, flood control, and hydroelectric power. Monitoring of dams is crucial since deformation might have occurred. How to obtain the deformation information and then judge the safe conditions is the key and difficult problem in dam deformation monitoring field. This paper proposes the periodic average system model and creates the concept of “settlement activity” based on the dam deformation issue. Long-term deformation monitoring data is carried out in a pumped-storage power station, this model combined with settlement activity is used to make the single point deformation analysis, and then the whole settlement activity profile is drawn by clustering analysis. Considering the cumulative settlement value of every point, the dam deformation trend is analyzed in an intuitive effect way. The analysis mode of combined single point with multipoints is realized. The results show that the key deformation information of the dam can be easily grasped by the application of the periodic average system model combined with the distribution diagram of settlement activity. And, above all, the ideas of this research provide an effective method for dam deformation analysis.

  8. Simulation of rock deformation behavior

    Directory of Open Access Journals (Sweden)

    Я. И. Рудаев

    2016-12-01

    Full Text Available A task of simulating the deformation behavior of geomaterials under compression with account of over-extreme branch has been addressed. The physical nature of rock properties variability as initially inhomogeneous material is explained by superposition of deformation and structural transformations of evolutionary type within open nonequilibrium systems. Due to this the description of deformation and failure of rock is related to hierarchy of instabilities within the system being far from thermodynamic equilibrium. It is generally recognized, that the energy function of the current stress-strain state is a superposition of potential component and disturbance, which includes the imperfection parameter accounting for defects not only existing in the initial state, but also appearing under load. The equation of state has been obtained by minimizing the energy function by the order parameter. The imperfection parameter is expressed through the strength deterioration, which is viewed as the internal parameter of state. The evolution of strength deterioration has been studied with the help of Fokker – Planck equation, which steady form corresponds to rock statical stressing. Here the diffusion coefficient is assumed to be constant, while the function reflecting internal sliding and loosening of the geomaterials is assumed as an antigradient of elementary integration catastrophe. Thus the equation of state is supplemented with a correlation establishing relationship between parameters of imperfection and strength deterioration. While deformation process is identified with the change of dissipative media, coupled with irreversible structural fluctuations. Theoretical studies are proven with experimental data obtained by subjecting certain rock specimens to compression.

  9. Preformas tipo Chivateros del yacimiento PV 35-3, Tres Piedras (valle de Huarmey, Perú

    Directory of Open Access Journals (Sweden)

    2002-01-01

    Full Text Available PRÉFORMES TYPE CHIVATEROS DU GISEMENT PV35-3, TRES PIEDRAS (VALLÉE DE HUARMEY, PÉROU. Les recherches sur la technologie lithique des préformes de type Chivateros du complexe paijanien (ca. 10000-6500 av. J.-C. de la côte nord du Pérou ont conduit à les différentier d'un point de vue technologique et typologique des autres stades de taille, i.e. des pièces à retouche minimum, préformes regularisées et des pièces foliacées, en fait des pièces ratées au cours de la mise en forme des pointes Paiján. Cependant cette classification manque d’une base d’études volumétriques qui permettrait de préciser des frontières dimentionelles entre tous les stades de taille de la technologie paijanien. Dans cette étude sont présentés les résultats d’un enregistrement métrique appliqué à une collection de préformes et éclats provenant du gisement PV35-3 (Tres Piedras, vallée de Huarmey. L’objectif était d’isoler ces ébauches de taille par ordre de grandeur et d'obtenir les mesures moyennes pour chaque étape. Bien que la série analysée ne soit pas tout à fait représentative de la chaîne opératoire, nous avons pu distinguer deux groupes correspondants à deux stades de taille successifs, compatibles avec les pièces à retouche minimum et les préformes de type Chivateros. Selon le critère de dégrossissage bifacial, il a été possible de prouver l'essai de réduction lithique du tailleur, qui laisse des restes de taille caractéristiques pour chaque stade. Las investigaciones sobre la tecnología lítica de las preformas bifaciales del Complejo Paijanense (ca. 10000-6500 a.C. de la costa norte del Perú han permitido diferenciarlas tecno y tipológicamente de los otros estadios de talla identificados i.e. piezas con retoque mínimo, preformas regularizadas y piezas foliáceas, de hecho piezas fallidas en el intento de la fabricación de puntas de tipo Paiján. Sin embargo, dicha clasificación carece de una base de

  10. Non-proportional deformation paths for sheet metal: experiments and models

    NARCIS (Netherlands)

    van den Boogaard, Antonius H.; van Riel, M.; Hora, P.

    2009-01-01

    For mild steel, after significant plastic deformation in one direction, a subsequent deformation in an orthogonal direction shows a typical stress overshoot compared to monotonic deformation. This phenomenon is investigated experimentally and numerically on a DC06 material. Two models that

  11. Jordanian deformations of the AdS5×S5 superstring

    NARCIS (Netherlands)

    Kawaguchi, I.; Matsumoto, T.; Yoshida, K

    2014-01-01

    We consider Jordanian deformations of the AdS_5xS^5 superstring action. The deformations correspond to non-standard q-deformation. In particular, it is possible to perform partial deformations, for example, only for the S^5 part. Then the classical action and the Lax pair are constructed with a

  12. Vestimentas compartidas y otros cuidados: Las formas de la generosidad en el Ms. K-III-4 [Libro de Apolonio, Vida de Santa María Egipciaca, Libre dels tres reys d'Orient

    Directory of Open Access Journals (Sweden)

    Carina Zubillaga

    2012-08-01

    Full Text Available The article undertakes a revisión of the generosity forms in the three poems of MS K-III-4 of the Library of San Lorenzo de El Escorial [Libro de Apolonio, Vida de Santa María Egipciaca, Libre dels tres reys d'Orient] to explain the unitary codicological organization, by means of the analysis of shared references, common motives and similar thematic configurationsEl artículo lleva a cabo una revisión de las formas de la generosidad presentes en los tres poemas que componen el Ms. K-III-4 de la Biblioteca de San Lorenzo de El Escorial [Libro de Apolonio, Vida de Santa María Egipciaca, Libre dels tres reys d'Orient], para dar cuenta -a través de las referencias compartidas, los motivos comunes y las configuraciones similares- de la organización unitaria del códice y de su singularidad

  13. 'Static' octupole deformation at high spin

    International Nuclear Information System (INIS)

    Nazarewicz, W.

    1985-01-01

    Rotational bands characterized by spin states of alternating parity p=(-1) I connected by enhanced E1 transitions have recently been observed in several nuclei from the Ra-Th region. They can be interpreted by means of a reflection asymmetric mean field theory. The interplay between octupole deformation and rotation is briefly discussed. For nuclei with ground state octupole deformation a transition to a reflection symmetric shape is expected around I=22. (orig.)

  14. Three-dimensional deformation of orthodontic brackets

    OpenAIRE

    Melenka, Garrett W; Nobes, David S; Major, Paul W; Carey, Jason P

    2013-01-01

    Braces are used by orthodontists to correct the misalignment of teeth in the mouth. Archwire rotation is a particular procedure used to correct tooth inclination. Wire rotation can result in deformation to the orthodontic brackets, and an orthodontic torque simulator has been designed to examine this wire?bracket interaction. An optical technique has been employed to measure the deformation due to size and geometric constraints of the orthodontic brackets. Images of orthodontic brackets are c...

  15. Plastic Deformation of Metal Surfaces

    DEFF Research Database (Denmark)

    Hansen, Niels; Zhang, Xiaodan; Huang, Xiaoxu

    2013-01-01

    of metal components. An optimization of processes and material parameters must be based on a quantification of stress and strain gradients at the surface and in near surface layer where the structural scale can reach few tens of nanometers. For such fine structures it is suggested to quantify structural...... parameters by TEM and EBSD and apply strength-structural relationships established for the bulk metal deformed to high strains. This technique has been applied to steel deformed by high energy shot peening and a calculated stress gradient at or near the surface has been successfully validated by hardness...

  16. Deformation of cylindrical vessel and the effect of barrel on deformation under inpulsive pressure of high explosive

    International Nuclear Information System (INIS)

    Iikura, Shoichi; Yashizawa, Hiroyasu; Sasanuma, Katsumi.

    1982-01-01

    According to the research performed so far, the result that the amount of deformation due to impulsive pressure was able to be evaluated by the impulse of impulsive pressure waves has been obtained. The analysis treating impulsive pressure waves as plane waves has been made frequently, but the analysis in which impulsive pressure waves must be treated as spherical waves, or the analysis of a vessel with a barrel (internal cylinder) is complex and difficult. In this report, the results of element test, which was carried out in the Oita Works, Asahi Chemical Industry Co., Ltd., in 1973 by the Power Reactor and Nuclear Fuel Development Corp. as the impact resistance test for fast breeder reactors, are rearranged and investigated. The specimens were the cylindrical vessels with upper and lower flanges, and 10 vessels and 9 kinds of barrels were made. Water was used as the pressure medium. The residual deformation and dynamic strain of the vessels and the wave form of pressure waves were measured. The deformation of cylindrical vessels subjected to the impulsive pressure from a point pressure source was able to be evaluated by the impulse distribution in normal direction. The maximum amount of deformation depended on the total plate thickness of barrels. (Kako, I.)

  17. Some aspects of reflection asymmetric deformations in nuclei

    International Nuclear Information System (INIS)

    Olanders, P.

    1984-10-01

    The nuclear shape in the intrinsic frame is studied using the Strutinsky method. Various potentials (Nilsson, folded Yukawa and Woods-Saxon) are used for the microscopic part, and the macroscopic part is described as a liquid drop with either a sharp or a smooth surface. Special attention is paid to the possibility of octupole deformed ground states. The consequences of octupole deformations for the rotational behaviour are investigated using the cranking model. It is particularly shown that octupole deformation may supress the backbending in some nuclei. (author)

  18. Relationship between local deformation behavior and crystallographic features of as-quenched lath martensite during uniaxial tensile deformation

    International Nuclear Information System (INIS)

    Michiuchi, M.; Nambu, S.; Ishimoto, Y.; Inoue, J.; Koseki, T.

    2009-01-01

    Electron backscattering diffraction patterns were used to investigate the relationship between local deformation behavior and the crystallographic features of as-quenched lath martensite of low-carbon steel during uniform elongation in tensile tests. The slip system operating during the deformation up to a strain of 20% was estimated by comparing the crystal rotation of each martensite block after deformation of 20% strain with predictions by the Taylor and Sachs models. The results indicate that the in-lath-plane slip system was preferentially activated compared to the out-of-lath-plane system up to this strain level. Further detailed analysis of crystal rotation at intervals of approximately 5% strain confirmed that the constraint on the operative slip system by the lath structure begins at a strain of 8% and that the local strain hardening of the primary slip systems occurred at approximately 15% strain.

  19. Collective excitations in deformed alkali metal clusters

    International Nuclear Information System (INIS)

    Lipparini, E.; Stringari, S.; Istituto Nazionale di Fisica Nucleare, Povo

    1991-01-01

    A theoretical study of collective excitations in deformed metal clusters is presented. Sum rules are used to study the splittings of the dipole surface plasma resonance originating from the cluster deformation. The vibrating potential model is developed and used to predict the occurrence of a low lying collective mode of orbital magnetic nature. (orig.)

  20. Literature survey: Relations between stress change, deformation and transmissivity for fractures and deformation zones based on in situ investigations

    Energy Technology Data Exchange (ETDEWEB)

    Fransson, Aasa (Chalmers Univ. of Technology, Goeteborg (Sweden))

    2009-02-15

    This literature survey is focused upon relations between stress change, deformation and transmissivity for fractures and deformation zones and aims at compiling and commenting on relevant information and references with focus on data from in situ investigations. Main issues to investigate are: - Impact of normal stress change and deformation on transmissivity, for fractures and deformation zones. - Impact of shear stress and displacement on transmissivity, for fractures and deformation zones for different normal load conditions. Considering the line of research within the area, the following steps in the development can be identified. During the 1970's and 1980's, the fundamentals of rock joint deformation were investigated and identification and description of mechanisms were made in the laboratory. In the 1990's, coupling of stress-flow properties of rock joints were made using hydraulic testing to identify and describe the mechanisms in the field. Both individual fractures and deformation zones were of interest. In situ investigations have also been the topic of interest the last ten years. Further identification and description of mechanisms in the field have been made including investigation and description of system of fractures, different types of fractures (interlocked/mated or mismatched/unmated) and how this is coupled to the hydromechanical behavior. In this report, data from in situ investigations are compiled and the parameters considered to be important to link fracture deformation and transmissivity are normal stiffness, k{sub n} and hydraulic aperture, b{sub h}. All data except for those from one site originate from investigations performed in granitic rock. Normal stiffness, k{sub n}, and hydraulic aperture, b{sub h}, are correlated, even though data are scattered. In general, the largest variation is seen for small hydraulic apertures and high normal stiffness. The increasing number of contact points (areas) and fracture filling are